NDARC - NASA Design and Analysis of Rotorcraft

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2015-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

NDARC NASA Design and Analysis of Rotorcraft Theory Appendix 1

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

Requirements analysis for a hardware, discrete-event, simulation engine accelerator

NASA Astrophysics Data System (ADS)

Taylor, Paul J., Jr.

1991-12-01

An analysis of a general Discrete Event Simulation (DES), executing on the distributed architecture of an eight mode Intel PSC/2 hypercube, was performed. The most time consuming portions of the general DES algorithm were determined to be the functions associated with message passing of required simulation data between processing nodes of the hypercube architecture. A behavioral description, using the IEEE standard VHSIC Hardware Description and Design Language (VHDL), for a general DES hardware accelerator is presented. The behavioral description specifies the operational requirements for a DES coprocessor to augment the hypercube's execution of DES simulations. The DES coprocessor design implements the functions necessary to perform distributed discrete event simulations using a conservative time synchronization protocol.

Protoptype integrated design (Pride) system reference manual. Volume 2: Schema definition

NASA Technical Reports Server (NTRS)

Fishwick, P. A.; Sutter, T. R.; Blackburn, C. L.

1983-01-01

An initial description of an evolving relational database schema is presented for the management of finite element model design and analysis data. The report presents a description of each relation including attribute names, data types, and definitions. The format of this report is such that future modifications and enhancements may be easily incorporated.

Integrated mobility measurement and notation system

NASA Technical Reports Server (NTRS)

Roebuck, J. A., Jr.

1967-01-01

System for description of movements and positions facilitates design of space suits with more mobility. This measurement and notation system gives concise and unequivocal descriptions, compatible with engineering analysis and applicable to specific needs.

High-Alpha Research Vehicle Lateral-Directional Control Law Description, Analyses, and Simulation Results

NASA Technical Reports Server (NTRS)

Davidson, John B.; Murphy, Patrick C.; Lallman, Frederick J.; Hoffler, Keith D.; Bacon, Barton J.

1998-01-01

This report contains a description of a lateral-directional control law designed for the NASA High-Alpha Research Vehicle (HARV). The HARV is a F/A-18 aircraft modified to include a research flight computer, spin chute, and thrust-vectoring in the pitch and yaw axes. Two separate design tools, CRAFT and Pseudo Controls, were integrated to synthesize the lateral-directional control law. This report contains a description of the lateral-directional control law, analyses, and nonlinear simulation (batch and piloted) results. Linear analysis results include closed-loop eigenvalues, stability margins, robustness to changes in various plant parameters, and servo-elastic frequency responses. Step time responses from nonlinear batch simulation are presented and compared to design guidelines. Piloted simulation task scenarios, task guidelines, and pilot subjective ratings for the various maneuvers are discussed. Linear analysis shows that the control law meets the stability margin guidelines and is robust to stability and control parameter changes. Nonlinear batch simulation analysis shows the control law exhibits good performance and meets most of the design guidelines over the entire range of angle-of-attack. This control law (designated NASA-1A) was flight tested during the Summer of 1994 at NASA Dryden Flight Research Center.

Descriptive Analysis of Secondary Special Education and Transition Services Model Programs.

ERIC Educational Resources Information Center

Rusch, Frank R.; And Others

This monograph provides a descriptive analysis of five grant programs funded by the Office of Special Education and Rehabilitative Services (OSERS) in 1984. The programs were designed to stimulate the improvement and development of programs for secondary special education and to strengthen and coordinate education, training, and related services…

Effects of a Training Package to Improve the Accuracy of Descriptive Analysis Data Recording

ERIC Educational Resources Information Center

Mayer, Kimberly L.; DiGennaro Reed, Florence D.

2013-01-01

Functional behavior assessment is an important precursor to developing interventions to address a problem behavior. Descriptive analysis, a type of functional behavior assessment, is effective in informing intervention design only if the gathered data accurately capture relevant events and behaviors. We investigated a training procedure to improve…

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ermi, A.M.

1997-05-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

Executive summary: Mod-1 wind turbine generator analysis and design report

NASA Technical Reports Server (NTRS)

1979-01-01

Activities leading to the detail design of a wind turbine generator having a nominal rating of 1.8 megawatts are reported. Topics covered include (1) system description; (2) structural dynamics; (3) stability analysis; (4) mechanical subassemblies design; (5) power generation subsystem; and (6) control and instrumentation subsystem.

Thermal Design Overview of the Mars Exploration Rover Project

NASA Technical Reports Server (NTRS)

Tsuyuki, Glenn

2002-01-01

Contents include the following: Mission Overview. Thermal Environments. Driving Thermal Requirements. Thermal Design Approach. Thermal Control Block Diagram. Thermal Design Description. Thermal Analysis Results Summary. Testing Plans. Issues & Concerns.

User's manual for the Heat Pipe Space Radiator design and analysis Code (HEPSPARC)

NASA Technical Reports Server (NTRS)

Hainley, Donald C.

1991-01-01

A heat pipe space radiatior code (HEPSPARC), was written for the NASA Lewis Research Center and is used for the design and analysis of a radiator that is constructed from a pumped fluid loop that transfers heat to the evaporative section of heat pipes. This manual is designed to familiarize the user with this new code and to serve as a reference for its use. This manual documents the completed work and is intended to be the first step towards verification of the HEPSPARC code. Details are furnished to provide a description of all the requirements and variables used in the design and analysis of a combined pumped loop/heat pipe radiator system. A description of the subroutines used in the program is furnished for those interested in understanding its detailed workings.

Bioresearch module design definition and space shuttle vehicle integration study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Lang, A. L., Jr.

1971-01-01

Data presented in the appendices covers: (1) summary description of baseline power system; (2) revised thermal profile analysis; (3) design analysis of television monitor; (4) bioresearch module ground station support evaluation; (5) variable spin control analysis; and (6) bioresearch modules and work flow.

DYAD: A Computer Program for the Analysis of Interpersonal Communication

ERIC Educational Resources Information Center

Fogel, Daniel S.

1978-01-01

A computer program which generates descriptions of conversational patterns of dyads based on sound-silence data is described. Input consists of talk/no-talk designations; output consists of descriptive matrices, histograms, and individual talk parameters. (Author/JKS)

Communicating Experimental Findings in Single Case Design Research: How to Use Celeration Values and Celeration Multipliers to Measure Direction, Magnitude, and Change of Slope

ERIC Educational Resources Information Center

Datchuk, Shawn M.; Kubina, Richard M., Jr.

2011-01-01

The accumulation of scientific knowledge greatly depends upon the critical review of experimental findings by ones peers. In single case design research, experimenters present findings with graphical displays of data and narrative description of a visual analysis. To aid in efficient and accurate description of experimental findings, the research…

Lunar drill and test apparatus

NASA Technical Reports Server (NTRS)

Norrington, David W.; Ardoin, Didier C.; Alexander, Stephen G.; Rowland, Philip N.; Vastakis, Frank N.; Linsey, Steven L.

1988-01-01

The design of an experimental lunar drill and a facility to test the drill under simulated lunar conditions is described. The drill utilizes a polycrystalline diamond compact drag bit and an auger to mechanically remove cuttings from the hole. The drill will be tested in a vacuum chamber and powered through a vacuum seal by a drive mechanism located above the chamber. A general description of the design is provided followed by a detailed description and analysis of each component. Recommendations for the further development of the design are included.

Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

Multidimensional System Analysis of Electro-Optic Sensors with Sampled Deterministic Output.

DTIC Science & Technology

1987-12-18

System descriptions of scanning and staring electro - optic sensors with sampled output are developed as follows. Functions representing image...to complete the system descriptions. The results should be useful for designing electro - optic sensor systems and correcting data for instrumental...effects and other experimental conditions. Keywords include: Electro - optic system analysis, Scanning sensors, Staring sensors, Spatial sampling, and Temporal sampling.

Synchronous meteorological satellite system description document, volume 3

NASA Technical Reports Server (NTRS)

Pipkin, F. B.

1971-01-01

The structural design, analysis, and mechanical integration of the synchronous meteorological satellite system are presented. The subjects discussed are: (1) spacecraft configuration, (2) structural design, (3) static load tests, (4) fixed base sinusoidal vibration survey, (5) flight configuration sinusoidal vibration tests, (6) spacecraft acoustic test, and (7) separation and shock test. Descriptions of the auxiliary propulsion subsystem, the apogee boost motor, communications system, and thermal control subsystem are included.

Crop identification technology assessment for remote sensing. (CITARS) Volume 9: Statistical analysis of results

NASA Technical Reports Server (NTRS)

Davis, B. J.; Feiveson, A. H.

1975-01-01

Results are presented of CITARS data processing in raw form. Tables of descriptive statistics are given along with descriptions and results of inferential analyses. The inferential results are organized by questions which CITARS was designed to answer.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 4: Solar electric propulsion vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents the solar electric propulsion (SEP) concept design developed as part of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the SEP concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 2: Cryo/aerobrake vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The cryogenic/aerobrake (CAB) and the cryogenic all-propulsive (CAP) concept designs developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study are presented. The evolution of the CAB and CAP concepts is described along with the requirements, guidelines and assumptions for the designs. Operating modes and options are defined and systems descriptions of the vehicles are presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities, and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 5: Nuclear electric propulsion vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

The nuclear electric propulsion (NEP) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study is presented. The evolution of the NEP concept is described along with the requirements, guidelines, and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 3: Nuclear thermal rocket vehicle

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents the nuclear thermal rocket (NTR) concept design developed in support of the Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) study. The evolution of the NTR concept is described along with the requirements, guidelines and assumptions for the design. Operating modes and options are defined and a systems description of the vehicle is presented. Artificial gravity configuration options and space and ground support systems are discussed. Finally, an implementation plan is presented which addresses technology needs, schedules, facilities and costs.

Aerodynamic design and analysis system for supersonic aircraft. Part 3: Computer program description

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1975-01-01

The computer program for the design and analysis of supersonic aircraft configurations is presented. The schematics of the program structure are provided. The individual overlays and subroutines are described. The system is useful in determining surface pressures and supersonic area rule concepts.

STS-1 operational flight profile. Volume 6: Abort analysis

NASA Technical Reports Server (NTRS)

1980-01-01

The abort analysis for the cycle 3 Operational Flight Profile (OFP) for the Space Transportation System 1 Flight (STS-1) is defined, superseding the abort analysis previously presented. Included are the flight description, abort analysis summary, flight design groundrules and constraints, initialization information, general abort description and results, abort solid rocket booster and external tank separation and disposal results, abort monitoring displays and discussion on both ground and onboard trajectory monitoring, abort initialization load summary for the onboard computer, list of the key abort powered flight dispersion analysis.

CIRCAL-2 - General-purpose on-line circuit design.

NASA Technical Reports Server (NTRS)

Dertouzos, M. L.; Jessel, G. P.; Stinger, J. R.

1972-01-01

CIRCAL-2 is a second-generation general-purpose on-line circuit-design program with the following main features: (1) multiple-analysis capability; (2) uniform and general data structures for handling text editing, network representations, and output results, regardless of analysis; (3) special techniques and structures for minimizing and controlling user-program interaction; (4) use of functionals for the description of hysteresis and heat effects; and (5) ability to define optimization procedures that 'replace' the user. The paper discusses the organization of CIRCAL-2, the aforementioned main features, and their consequences, such as a set of network elements and models general enough for most analyses and a set of functions tailored to circuit-design requirements. The presentation is descriptive, concentrating on conceptual rather than on program implementation details.

Mod-1 wind turbine generator analysis and design report, volume 1

NASA Technical Reports Server (NTRS)

1979-01-01

The activities leading to the completion of detail design of the MOD-1 wind turbine generator are described. Emphasis is placed on the description of the design as it finally evolved. However, the steps through which the design progressed are also traced in order to understand the major design decisions.

Design, Desire, and Difference

ERIC Educational Resources Information Center

Leander, Kevin M.; Boldt, Gail

2018-01-01

In response to the rise in popularity of concepts of "design" in education research, pedagogy, and curriculum design, in this article we consider how the New London Group conceived of the role of student design practices as an outcome of pedagogy, as well as the parallel role of design in teaching practices. In this descriptive analysis,…

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2014 CFR

2014-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2012 CFR

2012-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2013 CFR

2013-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

Developing a Methodology for Designing Systems of Instruction.

ERIC Educational Resources Information Center

Carpenter, Polly

This report presents a description of a process for instructional system design, identification of the steps in the design process, and determination of their sequence and interrelationships. As currently envisioned, several interrelated steps must be taken, five of which provide the inputs to the final design process. There are analysis of…

Mathematical Proof. Description of Teacher Inservice Education Materials.

ERIC Educational Resources Information Center

National Education Association, Washington, DC. Project on Utilization of Inservice Education R & D Outcomes.

The learning module described here is designed to help teachers plan and present a lesson on mathematical proof to pupils. The main topics covered are structure, hypothesis and conclusion, analysis, contrapositive, proof by contradiction, part proof worksheet, and conclusion and posttest. This descriptive report provides information on the…

A Descriptive and Evaluative Analysis of Program Planning Literature, 1950-1983.

ERIC Educational Resources Information Center

Sork, Thomas J.; Buskey, John H.

1986-01-01

Literature that presents a complete program planning model was described and analyzed using explicitly defined and uniformly applied descriptive and evaluative dimensions. Several observations about the current state of the program planning literature are made, and recommendations designed to strengthen the literature are offered. (Author/CT)

ATLAS, an integrated structural analysis and design system. Volume 4: Random access file catalog

NASA Technical Reports Server (NTRS)

Gray, F. P., Jr. (Editor)

1979-01-01

A complete catalog is presented for the random access files used by the ATLAS integrated structural analysis and design system. ATLAS consists of several technical computation modules which output data matrices to corresponding random access file. A description of the matrices written on these files is contained herein.

DESIGN ANALYSIS FOR THE NAVAL SNF WASTE PACKAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

T.L. Mitchell

2000-05-31

The purpose of this analysis is to demonstrate the design of the naval spent nuclear fuel (SNF) waste package (WP) using the Waste Package Department's (WPD) design methodologies and processes described in the ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000b). The calculations that support the design of the naval SNF WP will be discussed; however, only a sub-set of such analyses will be presented and shall be limited to those identified in the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The objective of this analysis is to describe themore » naval SNF WP design method and to show that the design of the naval SNF WP complies with the ''Naval Spent Nuclear Fuel Disposal Container System Description Document'' (CRWMS M&O 1999a) and Interface Control Document (ICD) criteria for Site Recommendation. Additional criteria for the design of the naval SNF WP have been outlined in Section 6.2 of the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The scope of this analysis is restricted to the design of the naval long WP containing one naval long SNF canister. This WP is representative of the WPs that will contain both naval short SNF and naval long SNF canisters. The following items are included in the scope of this analysis: (1) Providing a general description of the applicable design criteria; (2) Describing the design methodology to be used; (3) Presenting the design of the naval SNF waste package; and (4) Showing compliance with all applicable design criteria. The intended use of this analysis is to support Site Recommendation reports and assist in the development of WPD drawings. Activities described in this analysis were conducted in accordance with the technical product development plan (TPDP) ''Design Analysis for the Naval SNF Waste Package (CRWMS M&O 2000a).« less

A Comparison of Functional Models for Use in the Function-Failure Design Method

NASA Technical Reports Server (NTRS)

Stock, Michael E.; Stone, Robert B.; Tumer, Irem Y.

2006-01-01

When failure analysis and prevention, guided by historical design knowledge, are coupled with product design at its conception, shorter design cycles are possible. By decreasing the design time of a product in this manner, design costs are reduced and the product will better suit the customer s needs. Prior work indicates that similar failure modes occur with products (or components) with similar functionality. To capitalize on this finding, a knowledge base of historical failure information linked to functionality is assembled for use by designers. One possible use for this knowledge base is within the Elemental Function-Failure Design Method (EFDM). This design methodology and failure analysis tool begins at conceptual design and keeps the designer cognizant of failures that are likely to occur based on the product s functionality. The EFDM offers potential improvement over current failure analysis methods, such as FMEA, FMECA, and Fault Tree Analysis, because it can be implemented hand in hand with other conceptual design steps and carried throughout a product s design cycle. These other failure analysis methods can only truly be effective after a physical design has been completed. The EFDM however is only as good as the knowledge base that it draws from, and therefore it is of utmost importance to develop a knowledge base that will be suitable for use across a wide spectrum of products. One fundamental question that arises in using the EFDM is: At what level of detail should functional descriptions of components be encoded? This paper explores two approaches to populating a knowledge base with actual failure occurrence information from Bell 206 helicopters. Functional models expressed at various levels of detail are investigated to determine the necessary detail for an applicable knowledge base that can be used by designers in both new designs as well as redesigns. High level and more detailed functional descriptions are derived for each failed component based on NTSB accident reports. To best record this data, standardized functional and failure mode vocabularies are used. Two separate function-failure knowledge bases are then created aid compared. Results indicate that encoding failure data using more detailed functional models allows for a more robust knowledge base. Interestingly however, when applying the EFDM, high level descriptions continue to produce useful results when using the knowledge base generated from the detailed functional models.

Design and Analysis of Winglets for Military Aircraft. Phase 2

DTIC Science & Technology

1977-05-01

determine the effect of the AFFDI/Boeing winglets on the KC-135A’s aerodynamic performance and longitudinal and lateral-directional stability. A... Aerodynamic Synthesis and Flight Research, task 143101, Unified Flight Mechanics Technology, work unit 14310125, Design and Analysis of Winglets for...1 TI LOW-SPEED AERODYNAMIC ANALYSIS OF L ~AFFDLIBOEING WINGLET ON THE KC-135A ......................... 1 1 Description of Analytic Model

Sketching in Design Journals: An Analysis of Visual Representations in the Product Design Process

ERIC Educational Resources Information Center

Lau, Kimberly; Oehlberg, Lora; Agogino, Alice

2009-01-01

This paper explores the sketching behavior of designers and the role of sketching in the design process. Observations from a descriptive study of sketches provided in design journals, characterized by a protocol measuring sketching activities, are presented. A distinction is made between journals that are entirely tangible and those that contain…

Qualitative Descriptive Methods in Health Science Research.

PubMed

Colorafi, Karen Jiggins; Evans, Bronwynne

2016-07-01

The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

Methodological Status and Trends in Expository Text Structure Instruction Efficacy Research

ERIC Educational Resources Information Center

Bohaty, Janet J.; Hebert, Michael A.; Nelson, J. Ron; Brown, Jessica A.

2015-01-01

This systematic descriptive historical review was conducted to examine the status and trends in expository text structure instruction efficacy research for first through twelfth grade students. The analysis included sixty studies, which spanned the years 1978 to 2014. Descriptive dimensions of the research included study type, research design,…

The Development, Description and Appraisal of an Emergent Multimethod Research Design to Study Workforce Changes in Integrated Care Interventions.

PubMed

Busetto, Loraine; Luijkx, Katrien; Calciolari, Stefano; González-Ortiz, Laura G; Vrijhoef, Hubertus J M

2017-03-08

In this paper, we provide a detailed and explicit description of the processes and decisions underlying and shaping the emergent multimethod research design of our study on workforce changes in integrated chronic care. The study was originally planned as mixed method research consisting of a preliminary literature review and quantitative check of these findings via a Delphi panel. However, when the findings of the literature review were not appropriate for quantitative confirmation, we chose to continue our qualitative exploration of the topic via qualitative questionnaires and secondary analysis of two best practice case reports. The resulting research design is schematically described as an emergent and interactive multimethod design with multiphase combination timing. In doing so, we provide other researchers with a set of theory- and experience-based options to develop their own multimethod research and provide an example for more detailed and structured reporting of emergent designs. We argue that the terminology developed for the description of mixed methods designs should also be used for multimethod designs such as the one presented here.

Intermediate Design and Analysis of the PANSAT Electrical Power Subsystem

DTIC Science & Technology

1994-03-01

NAVAL POSTGRADUATE SCHOOL SMonterey, California 6’ AD-A283 610 jAUG 24 1994L THESIS INTERMEDIATE DESIGN AND ANALYSIS OF THE PANSAT ELECTRICAL POWER...data for PANSAM. iii TABLE OF CONTENTS I. INTRODUCTION 1 A. PURPOSE . . . . . . . . . . . . . . . . . . . . . . 1 B. PANSAT PROJECT DESCRIPTION...10 A. INTRODUCTION ................. ................... 10 B. ELECTRICAL CHARACTERISTICS ....... ............ 11 1. I-V Curve

Solar process water heat for the IRIS images custom color photo lab

NASA Technical Reports Server (NTRS)

1980-01-01

The solar facility located at a custom photo laboratory in Mill Valley, California is described. It was designed to provide 59 percent of the hot water requirements for developing photographic film and domestic hot water use. The design load is to provide 6 gallons of hot water per minute for 8 hours per working day at 100 F. It has 640 square feet of flat plate collectors and 360 gallons of hot water storage. The auxillary back up system is a conventional gas-fired water heater. Site and building description, subsystem description, as-built drawings, cost breakdown and analysis, performance analysis, lessons learned, and the operation and maintenance manual are presented.

Descriptive Analysis of Single Subject Research Designs: 1983-2007

ERIC Educational Resources Information Center

Hammond, Diana; Gast, David L.

2010-01-01

Single subject research methodology is commonly used and cited in special education courses and journals. This article reviews the types of single subject research designs published in eight refereed journals between 1983 and 2007 used to answer applied research questions. Single subject designs were categorized as withdrawal/reversal, time…

MSIX - A general and user-friendly platform for RAM analysis

NASA Astrophysics Data System (ADS)

Pan, Z. J.; Blemel, Peter

The authors present a CAD (computer-aided design) platform supporting RAM (reliability, availability, and maintainability) analysis with efficient system description and alternative evaluation. The design concepts, implementation techniques, and application results are described. This platform is user-friendly because of its graphic environment, drawing facilities, object orientation, self-tutoring, and access to the operating system. The programs' independency and portability make them generally applicable to various analysis tasks.

Research into Practice: The Influence of Discourse Studies on Language Descriptions and Task Design in Published ELT Materials

ERIC Educational Resources Information Center

Gilmore, Alex

2015-01-01

Discourse studies is a vast, multidisciplinary, and rapidly expanding area of research, embracing a range of approaches including discourse analysis, corpus analysis, conversation analysis, interactional sociolinguistics, critical discourse analysis, genre analysis and multimodal discourse analysis. Each approach offers its own unique perspective…

Designing an Elective Course on Gelotology

ERIC Educational Resources Information Center

Haynes, Gene C.

2016-01-01

The purpose of this capstone project was to design a course description on gelotology, the study of laughter, at a XYZ Institute. The course provides a detailed analysis of the background of gelotology, how the course was designed and how to put the course into application at the capstone site. The course was designed using a sample curriculum as…

76 FR 77538 - Family and Youth Services Bureau; Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

...) evaluation design, which will involve baseline surveys and two follow-up surveys. This will allow short- and... descriptive analysis of how States designed and implemented PREP programs. The study will use multiple methods... ``Design Survey'', will focus on how states designed programs, and the second round of interviews, known as...

Definition of experiments and instruments for a communication/navigation research laboratory. Volume 3: Laboratory descriptions

NASA Technical Reports Server (NTRS)

1972-01-01

The following study objectives are covered: (1) identification of major laboratory equipment; (2) systems and operations analysis in support of the laboratory design; and (3) conceptual design of the comm/nav research laboratory.

Design Evaluation for Personnel, Training and Human Factors (DEPTH) Final Report.

DTIC Science & Technology

1998-01-17

human activity was primarily intended to facilitate man-machine design analyses of complex systems. By importing computer aided design (CAD) data, the human figure models and analysis algorithms can help to ensure components can be seen, reached, lifted and removed by most maintainers. These simulations are also useful for logistics data capture, training, and task analysis. DEPTH was also found to be useful in obtaining task descriptions for technical

77 FR 42629 - Fisheries of the Exclusive Economic Zone Off Alaska; Chinook Salmon Bycatch Management in the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... managed fishery. The Council designed Amendment 93 to balance the competing requirements of the National... catch. The EA and RIR include a description of the alternatives and a comparative analysis of the... effects of a rule (and alternatives to the rule), or more general descriptive statements, if...

Research design and statistical methods in Pakistan Journal of Medical Sciences (PJMS).

PubMed

Akhtar, Sohail; Shah, Syed Wadood Ali; Rafiq, M; Khan, Ajmal

2016-01-01

This article compares the study design and statistical methods used in 2005, 2010 and 2015 of Pakistan Journal of Medical Sciences (PJMS). Only original articles of PJMS were considered for the analysis. The articles were carefully reviewed for statistical methods and designs, and then recorded accordingly. The frequency of each statistical method and research design was estimated and compared with previous years. A total of 429 articles were evaluated (n=74 in 2005, n=179 in 2010, n=176 in 2015) in which 171 (40%) were cross-sectional and 116 (27%) were prospective study designs. A verity of statistical methods were found in the analysis. The most frequent methods include: descriptive statistics (n=315, 73.4%), chi-square/Fisher's exact tests (n=205, 47.8%) and student t-test (n=186, 43.4%). There was a significant increase in the use of statistical methods over time period: t-test, chi-square/Fisher's exact test, logistic regression, epidemiological statistics, and non-parametric tests. This study shows that a diverse variety of statistical methods have been used in the research articles of PJMS and frequency improved from 2005 to 2015. However, descriptive statistics was the most frequent method of statistical analysis in the published articles while cross-sectional study design was common study design.

78 FR 8150 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... three components: the ``Design and Implementation Study,'' the ``Performance Analysis Study,'' and the...- Component Evaluation--Data Collection Related to the Performance Analysis Study and the Impact and the In-depth Implementation Study. OMB No.: 0970-0398 Description: The Office of Data Analysis, Research, and...

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

Computer program for preliminary design analysis of axial-flow turbines

NASA Technical Reports Server (NTRS)

Glassman, A. J.

1972-01-01

The program method is based on a mean-diameter flow analysis. Input design requirements include power or pressure ratio, flow, temperature, pressure, and speed. Turbine designs are generated for any specified number of stages and for any of three types of velocity diagrams (symmetrical, zero exit swirl, or impulse). Exit turning vanes can be included in the design. Program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, blading angles, and last-stage critical velocity ratios. The report presents the analysis method, a description of input and output with sample cases, and the program listing.

Contingency Space Analysis: An Alternative Method for Identifying Contingent Relations from Observational Data

PubMed Central

Martens, Brian K; DiGennaro, Florence D; Reed, Derek D; Szczech, Frances M; Rosenthal, Blair D

2008-01-01

Descriptive assessment methods have been used in applied settings to identify consequences for problem behavior, thereby aiding in the design of effective treatment programs. Consensus has not been reached, however, regarding the types of data or analytic strategies that are most useful for describing behavior–consequence relations. One promising approach involves the analysis of conditional probabilities from sequential recordings of behavior and events that follow its occurrence. In this paper we review several strategies for identifying contingent relations from conditional probabilities, and propose an alternative strategy known as a contingency space analysis (CSA). Step-by-step procedures for conducting and interpreting a CSA using sample data are presented, followed by discussion of the potential use of a CSA for conducting descriptive assessments, informing intervention design, and evaluating changes in reinforcement contingencies following treatment. PMID:18468280

Employing Simulation to Evaluate Designs: The APEX Approach

NASA Technical Reports Server (NTRS)

Freed, Michael A.; Shafto, Michael G.; Remington, Roger W.; Null, Cynthia H. (Technical Monitor)

1998-01-01

The key innovations of APEX are its integrated approaches to task analysis, procedure definition, and intelligent, resource-constrained multi-tasking. This paper presents a step-by-step description of how APEX is used, from scenario development through trace analysis.

A behavioral-level HDL description of SFQ logic circuits for quantitative performance analysis of large-scale SFQ digital systems

NASA Astrophysics Data System (ADS)

Matsuzaki, F.; Yoshikawa, N.; Tanaka, M.; Fujimaki, A.; Takai, Y.

2003-10-01

Recently many single flux quantum (SFQ) logic circuits containing several thousands of Josephson junctions have been designed successfully by using digital domain simulation based on the hard ware description language (HDL). In the present HDL-based design of SFQ circuits, a structure-level HDL description has been used, where circuits are made up of basic gate cells. However, in order to analyze large-scale SFQ digital systems, such as a microprocessor, more higher-level circuit abstraction is necessary to reduce the circuit simulation time. In this paper we have investigated the way to describe functionality of the large-scale SFQ digital circuits by a behavior-level HDL description. In this method, the functionality and the timing of the circuit block is defined directly by describing their behavior by the HDL. Using this method, we can dramatically reduce the simulation time of large-scale SFQ digital circuits.

Tower Shielding Reactor II design and operation report: Vol. 2. Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, L. B.; Kolb, J. O.

1970-01-01

Information on the Tower Shielding Reactor II is contained in the TSR-II Design and Operation Report and in the Tower Shielding Facility Manual. The TSR-II Design and Operating Report consists of three volumes. Volume 1 is Descriptions of the Tower Shielding Reactor II and Facility; Volume 2 is Safety analysis of the Tower Shielding Reactor II; and Volume 3 is the Assembly and Testing of the Tower Shielding Reactor II Control Mechanism Housing.

The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology: Capabilities and Applications

NASA Technical Reports Server (NTRS)

Evers, Ken H.; Bachert, Robert F.

1987-01-01

The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology has been formulated and applied over a five-year period. It has proven to be a unique, integrated approach utilizing a top-down, structured technique to define and document the system of interest; a knowledge engineering technique to collect and organize system descriptive information; a rapid prototyping technique to perform preliminary system performance analysis; and a sophisticated simulation technique to perform in-depth system performance analysis.

The Development, Description and Appraisal of an Emergent Multimethod Research Design to Study Workforce Changes in Integrated Care Interventions

PubMed Central

Luijkx, Katrien; Calciolari, Stefano; González-Ortiz, Laura G.

2017-01-01

Introduction: In this paper, we provide a detailed and explicit description of the processes and decisions underlying and shaping the emergent multimethod research design of our study on workforce changes in integrated chronic care. Theory and methods: The study was originally planned as mixed method research consisting of a preliminary literature review and quantitative check of these findings via a Delphi panel. However, when the findings of the literature review were not appropriate for quantitative confirmation, we chose to continue our qualitative exploration of the topic via qualitative questionnaires and secondary analysis of two best practice case reports. Results: The resulting research design is schematically described as an emergent and interactive multimethod design with multiphase combination timing. In doing so, we provide other researchers with a set of theory- and experience-based options to develop their own multimethod research and provide an example for more detailed and structured reporting of emergent designs. Conclusion and discussion: We argue that the terminology developed for the description of mixed methods designs should also be used for multimethod designs such as the one presented here. PMID:29042843

A Case Study on Teaching of Energy as a Subject for 9th Graders

ERIC Educational Resources Information Center

Bezen, Sevim; Bayrak, Celal; Aykutlu, Isil

2017-01-01

This study aims to describe how energy subject is taught in 9th grades. The study is designed as a descriptive case study with the participation of 3 physics teachers and 85 students. Data were obtained through observation, interviews, and documents, and they were analyzed through descriptive analysis method. In the observations made at the…

Design Protocols and Analytical Strategies that Incorporate Structural Reliability Models

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.

1995-01-01

The general goal of this project is to establish design protocols that enable the engineer to analyze and predict certain types of behavior in ceramic composites. Sections of the final report addresses the following: Description of the Problem that Motivated the Technology Development, Description of the New Technology that was Developed, Unique and Novel Features of the Technology and Results/Benefits of Application (year by year accomplishments), and Utilization of New Technology in Non-Aerospace Applications. Activities for this reporting period included the development of a design analysis as part of a cooperative agreement with general Electric Aircraft Engines. The effort focused on modifying the Toughened Ceramics Analysis and Reliability Evaluation of Structures (TCARES) algorithm for use in the design of engine components fabricated from NiAl. Other activities related to the development of an ASTM standard practice for estimating Weibull parameters. The standard focuses on the evaluation and reporting of uniaxial strength data, and the estimation of probability distribution parameters for ceramics which fail in a brittle fashion.

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Design Recovery for Software Library Population

DTIC Science & Technology

1992-12-01

increase understandability, efficiency, and maintainability of the software and the design. A good representation choice will also aid in...required for a reengineering project. It details the analysis and planning phase and gives good criteria for determining the need for a reengineering...because it deals with all of these issues. With his complete description of the analysis and planning phase, Byrne has a good foundation for

[Diversity and frequency of scientific research design and statistical methods in the "Arquivos Brasileiros de Oftalmologia": a systematic review of the "Arquivos Brasileiros de Oftalmologia"--1993-2002].

PubMed

Crosta, Fernando; Nishiwaki-Dantas, Maria Cristina; Silvino, Wilmar; Dantas, Paulo Elias Correa

2005-01-01

To verify the frequency of study design, applied statistical analysis and approval by institutional review offices (Ethics Committee) of articles published in the "Arquivos Brasileiros de Oftalmologia" during a 10-year interval, with later comparative and critical analysis by some of the main international journals in the field of Ophthalmology. Systematic review without metanalysis was performed. Scientific papers published in the "Arquivos Brasileiros de Oftalmologia" between January 1993 and December 2002 were reviewed by two independent reviewers and classified according to the applied study design, statistical analysis and approval by the institutional review offices. To categorize those variables, a descriptive statistical analysis was used. After applying inclusion and exclusion criteria, 584 articles for evaluation of statistical analysis and, 725 articles for evaluation of study design were reviewed. Contingency table (23.10%) was the most frequently applied statistical method, followed by non-parametric tests (18.19%), Student's t test (12.65%), central tendency measures (10.60%) and analysis of variance (9.81%). Of 584 reviewed articles, 291 (49.82%) presented no statistical analysis. Observational case series (26.48%) was the most frequently used type of study design, followed by interventional case series (18.48%), observational case description (13.37%), non-random clinical study (8.96%) and experimental study (8.55%). We found a higher frequency of observational clinical studies, lack of statistical analysis in almost half of the published papers. Increase in studies with approval by institutional review Ethics Committee was noted since it became mandatory in 1996.

Improvements in surface singularity analysis and design methods. [applicable to airfoils

NASA Technical Reports Server (NTRS)

Bristow, D. R.

1979-01-01

The coupling of the combined source vortex distribution of Green's potential flow function with contemporary numerical techniques is shown to provide accurate, efficient, and stable solutions to subsonic inviscid analysis and design problems for multi-element airfoils. The analysis problem is solved by direct calculation of the surface singularity distribution required to satisfy the flow tangency boundary condition. The design or inverse problem is solved by an iteration process. In this process, the geometry and the associated pressure distribution are iterated until the pressure distribution most nearly corresponding to the prescribed design distribution is obtained. Typically, five iteration cycles are required for convergence. A description of the analysis and design method is presented, along with supporting examples.

Test fixture design for boron-aluminum and beryllium test panels

NASA Technical Reports Server (NTRS)

Breaux, C. G.

1973-01-01

A detailed description of the test fixture design and the backup analysis of the fixture assembly and its components are presented. The test fixture is required for the separate testing of two boron-aluminum and two beryllium compression panels. This report is presented in conjunction with a complete set of design drawings on the test fixture system.

The Design of Adult Acute Care Units in U.S. Hospitals

PubMed Central

Catrambone, Cathy; Johnson, Mary E.; Mion, Lorraine C.; Minnick, Ann F.

2010-01-01

Purpose To describe the current state of design characteristics determined to be desirable by the Agency for Health Research and Quality (AHRQ) in U.S. adult medical, surgical, and intensive care units (ICUs). Design Descriptive study of patient visibility; distance to hygiene, toileting, charting, and supplies; unit configuration; percentage of private rooms; and presence or absence of carpeting in 56 ICUs and 81 medical-surgical units in six metropolitan areas. Methods Data were collected via observation, measurement, and interviews. Unit configurations were classified via an iterative process. Descriptive data were analyzed according to ICU and non-ICU status using SPSS (Version 15). Findings Analysis of unit configurations indicated eight unit designs. Statistical analysis showed inter- and intrahospital variation in unit configurations, percentage private rooms, carpeting, visibility, and distance to supplies and charting. Few units met the AHRQ designated design elements studied. Conclusions A wide gap exists between desirable characteristics in ICUs and medical-surgical units. Future research is needed to explore operationalization of unit design elements as risk adjustments, how design elements contribute to patient outcomes, and how design elements influence one another. Clinical Relevance There is room for improvement on almost every design variable, particularly on medical-surgical units. Future planning should take into consideration the interaction of bed capacity and unit configuration. PMID:19335681

Analysis of pavement response data and use of nondestructive testing for improving pavement design.

DOT National Transportation Integrated Search

2006-08-01

The first fully instrumented flexible pavement test section in Maine was constructed in Fall, 2005. This paper presents : the description of the instruments, their installation, and analysis of temperature and stress-strain data collected so far. : T...

Research design and statistical methods in Pakistan Journal of Medical Sciences (PJMS)

PubMed Central

Akhtar, Sohail; Shah, Syed Wadood Ali; Rafiq, M.; Khan, Ajmal

2016-01-01

Objective: This article compares the study design and statistical methods used in 2005, 2010 and 2015 of Pakistan Journal of Medical Sciences (PJMS). Methods: Only original articles of PJMS were considered for the analysis. The articles were carefully reviewed for statistical methods and designs, and then recorded accordingly. The frequency of each statistical method and research design was estimated and compared with previous years. Results: A total of 429 articles were evaluated (n=74 in 2005, n=179 in 2010, n=176 in 2015) in which 171 (40%) were cross-sectional and 116 (27%) were prospective study designs. A verity of statistical methods were found in the analysis. The most frequent methods include: descriptive statistics (n=315, 73.4%), chi-square/Fisher’s exact tests (n=205, 47.8%) and student t-test (n=186, 43.4%). There was a significant increase in the use of statistical methods over time period: t-test, chi-square/Fisher’s exact test, logistic regression, epidemiological statistics, and non-parametric tests. Conclusion: This study shows that a diverse variety of statistical methods have been used in the research articles of PJMS and frequency improved from 2005 to 2015. However, descriptive statistics was the most frequent method of statistical analysis in the published articles while cross-sectional study design was common study design. PMID:27022365

Flow induced vibrations in the SSME injector heads

NASA Technical Reports Server (NTRS)

Lepore, Frank A.

1991-01-01

A description is given of the flowfield in the Space Shuttle Main Engine (SSME) powerhead, the mechanisms which control flow-induced vibrations, and previous experimental work. An in-depth description is given of the development phase of the program , which includes the analysis, design, and fabrication of liquid oxygen (LOX) posts models used in the experimental phase, as well as test facilities, equipment, and procedures used. Also covered is the experimental data analysis, which includes overall steady state powerhead flowfield as well as the high frequency response of the LOX posts.

A cladistic analysis of Aristotle's animal groups in the Historia animalium.

PubMed

von Lieven, Alexander Fürst; Humar, Marcel

2008-01-01

The Historia animalium (HA) of Aristotle contains an extraordinarily rich compilation of descriptions of animal anatomy, development, and behaviour. It is believed that Aristotle's aim in HA was to describe the correlations of characters rather than to classify or define animal groups. In order to assess if Aristotle, while organising his character correlations, referred to a pre-existing classification that underlies the descriptions in HA, we carried out a cladistic analysis according to the following procedure: by disentangeling 147 species and 40 higher taxa-designations from 157 predicates in the texts, we transcribed Aristotle's descriptions on anatomy and development of animals in books I-V of HA into a character matrix for a cladistic analysis. By analysing the distribution of characters as described in his books, we obtained a non-phylogenetic dendrogram displaying 58 monophyletic groups, 29 of which have equivalents among Aristotle's group designations. Eleven Aristotelian groupings turned out to be non-monophyletic, and six of them are inconsistent with the monophyletic groups. Twelve of 29 taxa without equivalents in Aristotle's works have equivalents in modern classifications. With this analysis we demonstate there exists a fairly consistent underlying classification in the zoological works of Aristotle. The peculiarities of Aristotle's character basis are discussed and the dendrogram is compared with a current phylogenetic tree.

The Scope and Design of Structured Group Learning Experiences at Community Colleges

ERIC Educational Resources Information Center

Hatch, Deryl K.; Bohlig, E. Michael

2015-01-01

This study explores through descriptive analysis the similarities of structured group learning experiences such as first-year seminars, learning communities, orientation, success courses, and accelerated developmental education programs, in terms of their design features and implementation at community colleges. The study takes as its conceptual…

Explaining Relationships among Student Outcomes and the School's Physical Environment

ERIC Educational Resources Information Center

Tanner, C. Kenneth

2008-01-01

This descriptive study investigated the possible effects of selected school design patterns on third-grade students' academic achievement. A reduced regression analysis revealed the effects of school design components (patterns) on ITBS achievement data, after including control variables, for a sample of third-grade students drawn from 24…

Component Analyses Using Single-Subject Experimental Designs: A Review

ERIC Educational Resources Information Center

Ward-Horner, John; Sturmey, Peter

2010-01-01

A component analysis is a systematic assessment of 2 or more independent variables or components that comprise a treatment package. Component analyses are important for the analysis of behavior; however, previous research provides only cursory descriptions of the topic. Therefore, in this review the definition of "component analysis" is discussed,…

45 CFR 307.15 - Approval of advance planning documents for computerized support enforcement systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... feasibility of the proposed effort and provide for the conduct of a requirements analysis study which address... indicate how the results of the requirements analysis study will be incorporated into the proposed system... address requirements analysis, program design, procurement and project management; and, a description of...

Engine Structures Modeling Software System (ESMOSS)

NASA Technical Reports Server (NTRS)

1991-01-01

Engine Structures Modeling Software System (ESMOSS) is the development of a specialized software system for the construction of geometric descriptive and discrete analytical models of engine parts, components, and substructures which can be transferred to finite element analysis programs such as NASTRAN. The NASA Lewis Engine Structures Program is concerned with the development of technology for the rational structural design and analysis of advanced gas turbine engines with emphasis on advanced structural analysis, structural dynamics, structural aspects of aeroelasticity, and life prediction. Fundamental and common to all of these developments is the need for geometric and analytical model descriptions at various engine assembly levels which are generated using ESMOSS.

Mod-5A wind turbine generator program design report. Volume 3: Final design and system description, book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 3, book 1 describes the performance and characteristics of the MOD-5A wind turbine generator in its final configuration. Each subsystem - the rotor, drivetrain, nacelle, tower and foundation is described in detail.

On-line analysis capabilities developed to support the AFW wind-tunnel tests

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Hoadley, Sherwood T.; Mcgraw, Sandra M.

1992-01-01

A variety of on-line analysis tools were developed to support two active flexible wing (AFW) wind-tunnel tests. These tools were developed to verify control law execution, to satisfy analysis requirements of the control law designers, to provide measures of system stability in a real-time environment, and to provide project managers with a quantitative measure of controller performance. Descriptions and purposes of the developed capabilities are presented along with examples. Procedures for saving and transferring data for near real-time analysis, and descriptions of the corresponding data interface programs are also presented. The on-line analysis tools worked well before, during, and after the wind tunnel test and proved to be a vital and important part of the entire test effort.

Analysis of truss, beam, frame, and membrane components. [composite structures

NASA Technical Reports Server (NTRS)

Knoell, A. C.; Robinson, E. Y.

1975-01-01

Truss components are considered, taking into account composite truss structures, truss analysis, column members, and truss joints. Beam components are discussed, giving attention to composite beams, laminated beams, and sandwich beams. Composite frame components and composite membrane components are examined. A description is given of examples of flat membrane components and examples of curved membrane elements. It is pointed out that composite structural design and analysis is a highly interactive, iterative procedure which does not lend itself readily to characterization by design or analysis function only.-

Design of the advanced regional aircraft, the DART-75

NASA Technical Reports Server (NTRS)

Elliott, Steve; Gislason, Jason; Huffstetler, Mark; Mann, Jon; Withers, Ashley; Zimmerman, Mark

1992-01-01

This design analysis is intended to show the capabilities of the DART-75, a 75 passenger medium-range regional transport. Included are the detailed descriptions of the structures, performance, stability and control, weight and balance, and engine design. The design should allow for the DART to become the premier regional aircraft of the future due to some advanced features like the canard, semi-composite construction, and advanced engines.

Lemonade's the Name, Simulation's the Game.

ERIC Educational Resources Information Center

Friel, Susan

1983-01-01

Provides a detailed description of Lemonade, a business game designed to introduce elementary and secondary students to the basics of business; i.e., problem solving strategies, hypothesis formulation and testing, trend analysis, prediction, comparative analysis, and effects of such factors as advertising and climatic conditions on sales and…

Inclusive Education Practice in Southwestern Nigeria: A Situational Analysis

ERIC Educational Resources Information Center

Adeniyi, Samuel Olufemi; Adeyemi, Akinkunmi Oluwadamilare

2015-01-01

This study presented situational analysis of inclusive educational practice in southwestern Nigeria. The study employed descriptive survey research design. Samples of 131 teachers, 51 parents and 51 head teachers/principals were purposively selected from State Grammar School, Ipakodo Junior Grammar School, Methodist Grammar School, Ijokodo High…

The computational structural mechanics testbed procedures manual

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1991-01-01

The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.

A computational system for aerodynamic design and analysis of supersonic aircraft. Part 1: General description and theoretical development

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.

1976-01-01

An integrated system of computer programs was developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. Schematics of the program structure and the individual overlays and subroutines are described.

Coupled dynamics analysis of wind energy systems

NASA Technical Reports Server (NTRS)

Hoffman, J. A.

1977-01-01

A qualitative description of all key elements of a complete wind energy system computer analysis code is presented. The analysis system addresses the coupled dynamics characteristics of wind energy systems, including the interactions of the rotor, tower, nacelle, power train, control system, and electrical network. The coupled dynamics are analyzed in both the frequency and time domain to provide the basic motions and loads data required for design, performance verification and operations analysis activities. Elements of the coupled analysis code were used to design and analyze candidate rotor articulation concepts. Fundamental results and conclusions derived from these studies are presented.

Computer program for design analysis of radial-inflow turbines

NASA Technical Reports Server (NTRS)

Glassman, A. J.

1976-01-01

A computer program written in FORTRAN that may be used for the design analysis of radial-inflow turbines was documented. The following information is included: loss model (estimation of losses), the analysis equations, a description of the input and output data, the FORTRAN program listing and list of variables, and sample cases. The input design requirements include the power, mass flow rate, inlet temperature and pressure, and rotational speed. The program output data includes various diameters, efficiencies, temperatures, pressures, velocities, and flow angles for the appropriate calculation stations. The design variables include the stator-exit angle, rotor radius ratios, and rotor-exit tangential velocity distribution. The losses are determined by an internal loss model.

36 CFR 220.7 - Environmental assessment and decision notice.

Code of Federal Regulations, 2013 CFR

2013-07-01

... modifications and incremental design features developed through the analysis process to develop the alternatives... proposed action and any alternatives together in a comparative description or describe the impacts of each...

36 CFR 220.7 - Environmental assessment and decision notice.

Code of Federal Regulations, 2012 CFR

2012-07-01

... modifications and incremental design features developed through the analysis process to develop the alternatives... proposed action and any alternatives together in a comparative description or describe the impacts of each...

36 CFR 220.7 - Environmental assessment and decision notice.

Code of Federal Regulations, 2014 CFR

2014-07-01

... modifications and incremental design features developed through the analysis process to develop the alternatives... proposed action and any alternatives together in a comparative description or describe the impacts of each...

36 CFR 220.7 - Environmental assessment and decision notice.

Code of Federal Regulations, 2011 CFR

2011-07-01

... modifications and incremental design features developed through the analysis process to develop the alternatives... proposed action and any alternatives together in a comparative description or describe the impacts of each...

36 CFR 220.7 - Environmental assessment and decision notice.

Code of Federal Regulations, 2010 CFR

2010-07-01

... modifications and incremental design features developed through the analysis process to develop the alternatives... proposed action and any alternatives together in a comparative description or describe the impacts of each...

The study design elements employed by researchers in preclinical animal experiments from two research domains and implications for automation of systematic reviews.

PubMed

O'Connor, Annette M; Totton, Sarah C; Cullen, Jonah N; Ramezani, Mahmood; Kalivarapu, Vijay; Yuan, Chaohui; Gilbert, Stephen B

2018-01-01

Systematic reviews are increasingly using data from preclinical animal experiments in evidence networks. Further, there are ever-increasing efforts to automate aspects of the systematic review process. When assessing systematic bias and unit-of-analysis errors in preclinical experiments, it is critical to understand the study design elements employed by investigators. Such information can also inform prioritization of automation efforts that allow the identification of the most common issues. The aim of this study was to identify the design elements used by investigators in preclinical research in order to inform unique aspects of assessment of bias and error in preclinical research. Using 100 preclinical experiments each related to brain trauma and toxicology, we assessed design elements described by the investigators. We evaluated Methods and Materials sections of reports for descriptions of the following design elements: 1) use of comparison group, 2) unit of allocation of the interventions to study units, 3) arrangement of factors, 4) method of factor allocation to study units, 5) concealment of the factors during allocation and outcome assessment, 6) independence of study units, and 7) nature of factors. Many investigators reported using design elements that suggested the potential for unit-of-analysis errors, i.e., descriptions of repeated measurements of the outcome (94/200) and descriptions of potential for pseudo-replication (99/200). Use of complex factor arrangements was common, with 112 experiments using some form of factorial design (complete, incomplete or split-plot-like). In the toxicology dataset, 20 of the 100 experiments appeared to use a split-plot-like design, although no investigators used this term. The common use of repeated measures and factorial designs means understanding bias and error in preclinical experimental design might require greater expertise than simple parallel designs. Similarly, use of complex factor arrangements creates novel challenges for accurate automation of data extraction and bias and error assessment in preclinical experiments.

Cost Effectiveness Analysis between Boarding and Day Secondary Students in Kenya

ERIC Educational Resources Information Center

Jagero, N.; Ayodo, T. M.; Agak, J. A.

2011-01-01

This paper examines the cost effectiveness of educating boarding and day secondary students in Kisumu district in Kenya. The research designs used in this study were descriptive survey and casual comparative designs. The population consisted of five head teachers, 140 form four teachers and 609 form four students. Saturated and systematic random…

A Psychometric Validation of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale

ERIC Educational Resources Information Center

Pruett, Steven R.; Deiches, Jon; Pfaller, Joseph; Moser, Erin; Chan, Fong

2014-01-01

Objective: To determine the factorial validity of the Internal and External Motivation to Respond without Prejudice toward People with Disabilities Scale (D-IMS/EMS). Design: A quantitative descriptive design using factor analysis. Participants: 233 rehabilitation counseling and rehabilitation services students. Results: Both exploratory and…

NASA contributions to radial turbine aerodynamic analyses

NASA Technical Reports Server (NTRS)

Glassman, A. J.

1980-01-01

A brief description of the radial turbine and its analysis needs is followed by discussions of five analytical areas; design geometry and performance, off design performance, blade row flow, scroll flow, and duct flow. The functions of the programs, areas of applicability, and limitations and uncertainties are emphasized. Both past contributions and current activities are discussed.

Learning and Learning-to-Learn by Doing: Simulating Corporate Practice in Law School.

ERIC Educational Resources Information Center

Okamoto, Karl S.

1995-01-01

A law school course in advanced corporate legal practice is described. The course, a series of simulated lawyering tasks centered on a hypothetical leveraged buyout transaction, is designed to go beyond basic legal analysis to develop professional expertise in legal problem solving. The course description includes goals, syllabus design,…

Statistical Tutorial | Center for Cancer Research

Cancer.gov

Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data.  ST is designed as a follow up to Statistical Analysis of Research Data (SARD) held in April 2018.  The tutorial will apply the general principles of statistical analysis of research data including descriptive statistics, z- and t-tests of means and mean

Analysis of Feeder Bus Network Design and Scheduling Problems

PubMed Central

Almasi, Mohammad Hadi; Karim, Mohamed Rehan

2014-01-01

A growing concern for public transit is its inability to shift passenger's mode from private to public transport. In order to overcome this problem, a more developed feeder bus network and matched schedules will play important roles. The present paper aims to review some of the studies performed on Feeder Bus Network Design and Scheduling Problem (FNDSP) based on three distinctive parts of the FNDSP setup, namely, problem description, problem characteristics, and solution approaches. The problems consist of different subproblems including data preparation, feeder bus network design, route generation, and feeder bus scheduling. Subsequently, descriptive analysis and classification of previous works are presented to highlight the main characteristics and solution methods. Finally, some of the issues and trends for future research are identified. This paper is targeted at dealing with the FNDSP to exhibit strategic and tactical goals and also contributes to the unification of the field which might be a useful complement to the few existing reviews. PMID:24526890

Alternative approaches to analytical designs in occupational injury epidemiology.

PubMed

Mittleman, M A; Maldonado, G; Gerberich, S G; Smith, G S; Sorock, G S

1997-08-01

In this paper, we discuss the theoretical framework upon which observational studies of occupational injuries are based. Following a general description of how causal effects are estimated, the challenges faced by researchers working in this area are outlined, with an emphasis on case-control studies. These challenges include defining the at-risk period for workers whose tasks change over time and whose hazard period may be very brief, evaluating the underreporting of both exposures and injuries, and considering the effects of multiple injuries per individual on study design and data analysis. We review both the theoretical and practical considerations in the design and conduct of traditional case-control studies, based on the collection of individual level data, as well as other approaches, such as using information culled from administrative and descriptive databases, and case-control studies in which the plant or work site is the unit of analysis. The case-crossover design is also reviewed and its utility for reducing confounding due to differences between individuals by self-matching is highlighted. While this design has not yet been applied to the work setting, its potential for increasing our understanding of the causes of acute-onset occupational injuries seems promising. Finally, a variety of hybrid designs are discussed, including combinations of case-control, case-crossover, and cohort designs.

Analysis of Dual Mode Systems in an Urban Area : Volume 3. Description of the Analysis Techniques and Data Sources.

DOT National Transportation Integrated Search

1973-12-01

Various forms of Dual Mode transportation were analyzed in order to assess the economic viability of the dual mode concept. Specially designed new small Dual Mode vehicles, modifications of existing automobiles, and pallet systems, all operating in c...

Analysis of Dual Mode Systems in an Urban Area : Volume 3. Description of the Analysis Techniques and Data Sources

DOT National Transportation Integrated Search

1973-12-01

Various forms of Dual Mode transportation were analyzed in order to assess the economic viability of the dual mode concept. Specially designed new small Dual Mode vehicles, modifications of existing automobiles, and pallet systems, all operating in c...

Bubble motion in a rotating liquid body. [ground based tests for space shuttle experiments

NASA Technical Reports Server (NTRS)

Annamalai, P.; Subramanian, R. S.; Cole, R.

1982-01-01

The behavior of a single gas bubble inside a rotating liquid-filled sphere has been investigated analytically and experimentally as part of ground-based investigations aimed at aiding in the design and interpretation of Shuttle experiments. In the analysis, a quasi-static description of the motion of a bubble was developed in the limit of small values of the Taylor number. A series of rotation experiments using air bubbles and silicone oils were designed to match the conditions specified in the analysis, i.e., the bubble size, sphere rotation rate, and liquid kinematic viscosity were chosen such that the Taylor number was much less than unity. The analytical description predicts the bubble velocity and its asymptotic location. It is shown that the asymptotic position is removed from the axis of rotation.

Development and Design Application of Rigidized Surface Insulation Thermal Protection Systems, Volume 1. [for the space shuttle

NASA Technical Reports Server (NTRS)

1972-01-01

Materials and design technology of the all-silica LI-900 rigid surface insulation (RSI) thermal protection system (TPS) concept for the shuttle spacecraft is presented. All results of contract development efforts are documented. Engineering design and analysis of RSI strain arrestor plate material selections, sizing, and weight studies are reported. A shuttle prototype test panel was designed, analyzed, fabricated, and delivered. Thermophysical and mechanical properties of LI-900 were experimentally established and reported. Environmental tests, including simulations of shuttle loads represented by thermal response, turbulent duct, convective cycling, and chemical tolerance tests are described and results reported. Descriptions of material test samples and panels fabricated for testing are included. Descriptions of analytical sizing and design procedures are presented in a manner formulated to allow competent engineering organizations to perform rational design studies. Results of parametric studies involving material and system variables are reported. Material performance and design data are also delineated.

High Power Magnetohydrodynamic System; Volume 2

DTIC Science & Technology

1978-07-01

INSTRUCTIONS BEFORE COMPLETING FORM REPORT NUMBER 2. GOVT ACCESSION NO. 3 . RECIPIENT’S CATALOG NUMBER AFAPL-TR-78-51 Vol 1[ 4. TITLE (mnd Subtitle) 5. TYPE... 3 . To achieve these performance requirements, the required characteristic velocity efficiency of the combustion system was greater than 99%. During...Introduction 355 2. General Description 356 3 . Design Criteria 358 4. Design Specifications 362 5. Design Analysis 365 6. Design Details 369 7. Fabrication 375 a

An artificial viscosity method for the design of supercritical airfoils

NASA Technical Reports Server (NTRS)

Mcfadden, G. B.

1979-01-01

A numerical technique is presented for the design of two-dimensional supercritical wing sections with low wave drag. The method is a design mode of the analysis code H which gives excellent agreement with experimental results and is widely used in the aircraft industry. Topics covered include the partial differential equations of transonic flow, the computational procedure and results; the design procedure; a convergence theorem; and description of the code.

Design and analysis of an underactuated anthropomorphic finger for upper limb prosthetics.

PubMed

Omarkulov, Nurdos; Telegenov, Kuat; Zeinullin, Maralbek; Begalinova, Ainur; Shintemirov, Almas

2015-01-01

This paper presents the design of a linkage based finger mechanism ensuring extended range of anthropomorphic gripping motions. The finger design is done using a path-point generation method based on geometrical dimensions and motion of a typical index human finger. Following the design description, and its kinematics analysis, the experimental evaluation of the finger gripping performance is presented using the finger 3D printed prototype. The finger underactuation is achieved by utilizing mechanical linkage system, consisting of two crossed four-bar linkage mechanisms. It is shown that the proposed finger design can be used to design a five-fingered anthropomorphic hand and has the potential for upper limb prostheses development.

Development of a prototype commonality analysis tool for use in space programs

NASA Technical Reports Server (NTRS)

Yeager, Dorian P.

1988-01-01

A software tool to aid in performing commonality analyses, called Commonality Analysis Problem Solver (CAPS), was designed, and a prototype version (CAPS 1.0) was implemented and tested. The CAPS 1.0 runs in an MS-DOS or IBM PC-DOS environment. The CAPS is designed around a simple input language which provides a natural syntax for the description of feasibility constraints. It provides its users with the ability to load a database representing a set of design items, describe the feasibility constraints on items in that database, and do a comprehensive cost analysis to find the most economical substitution pattern.

Simple Parametric Model for Airfoil Shape Description

NASA Astrophysics Data System (ADS)

Ziemkiewicz, David

2017-12-01

We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

A computational system for aerodynamic design and analysis of supersonic aircraft. Part 2: User's manual

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1976-01-01

An integrated system of computer programs was developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. This user's manual contains a description of the system, an explanation of its usage, the input definition, and example output.

A Comparison of Descriptive and Functional Analyses of Inappropriate Mealtime Behavior.

PubMed

Borrero, Carrie S W; England, Jennie D; Sarcia, Ben; Woods, Julia N

2016-12-01

In recent years, rather than being used to assess the potential function of a response, descriptive assessment methods have been applied to evaluate potential consequences or contingencies for problem behavior (Borrero, Woods, Borrero, Masler, & Lesser in Journal of Applied Behavior Analysis, 43 , 71-88. doi: 10.1901/jaba.2010.43-71, 2010) or to assist with designing baseline conditions to approximate caregiver behavior (Casey et al. in Behavior Modification, 33 , 537-558. doi: 10.1177/0145445509341457, 2009). It has been shown that descriptive assessments of some forms of problem behavior (e.g., self-injury, aggression) are not good indicators of behavioral function and should not be used exclusively when conducting functional behavior assessments (Thompson & Iwata in Journal of Applied Behavior Analysis, 40 , 333-338. doi: 10.1901/jaba.2007.56.06/epdf, 2007). However, the extent to which descriptive assessments of inappropriate mealtime behavior can predict behavioral function is not yet clear. We conducted descriptive assessments of inappropriate mealtime behavior and compared the results to functional analyses for ten children with severe food refusal. Results showed that, for 71 % of participants, the descriptive and functional analyses matched. These results suggest that the correspondence between descriptive and functional analyses, at least for inappropriate mealtime behavior, may be higher than that for other forms of problem behavior.

REMARK checklist elaborated to improve tumor prognostician

Cancer.gov

Experts have elaborated on a previously published checklist of 20 items -- including descriptions of design, methods, and analysis -- that researchers should address when publishing studies of prognostic markers. These markers are indicators that enable d

An Analysis of Risk and Function Information in Early Stage Design

NASA Technical Reports Server (NTRS)

Barrientos, Francesca; Tumer, Irem; Grantham, Katie; VanWie, Michael; Stone, Robert

2005-01-01

The concept of function offers a high potential for thinking and reasoning about designs as well as providing a common thread for relating together other design information. This paper focuses specifically on the relation between function and risk by examining how this information is addressed for a design team conducting early stage design for space missions. Risk information is decomposed into a set of key attributes which are then used to scrutinize the risk information using three approaches from the pragmatics sub-field of linguistics: i) Gricean, ii) Relevance Theory, and Functional Analysis. Results of this linguistics-based approach descriptively account for the context of designer communication with respect to function and risk, and offer prescriptive guidelines for improving designer communication.

[Review of research design and statistical methods in Chinese Journal of Cardiology].

PubMed

Zhang, Li-jun; Yu, Jin-ming

2009-07-01

To evaluate the research design and the use of statistical methods in Chinese Journal of Cardiology. Peer through the research design and statistical methods in all of the original papers in Chinese Journal of Cardiology from December 2007 to November 2008. The most frequently used research designs are cross-sectional design (34%), prospective design (21%) and experimental design (25%). In all of the articles, 49 (25%) use wrong statistical methods, 29 (15%) lack some sort of statistic analysis, 23 (12%) have inconsistencies in description of methods. There are significant differences between different statistical methods (P < 0.001). The correction rates of multifactor analysis were low and repeated measurement datas were not used repeated measurement analysis. Many problems exist in Chinese Journal of Cardiology. Better research design and correct use of statistical methods are still needed. More strict review by statistician and epidemiologist is also required to improve the literature qualities.

Empathetic Design: A Sustainable Approach to School Change

ERIC Educational Resources Information Center

Hartman, Rita J.; Johnston, Elizabeth; Hill, Marty

2017-01-01

A descriptive case study approach is employed using a content analysis of the blogs of 36 school leaders who took part in the 2016-2017 Shadow a Student Challenge project and follow up interviews of five of the school leaders. This research was used to explore and describe how an empathetic design approach provided a greater vantage point for…

Factors Affecting Cheating-Behavior at Undergraduate-Engineering

ERIC Educational Resources Information Center

Starovoytova, Diana; Namango, Saul

2016-01-01

This study is a fraction of a larger research on cheating in exams at the School of Engineering (SOE). The study design used a descriptive survey approach and a document analysis. A designed confidential self report questioner was applied as the main instrument for this study, with the sample size of 100 subjects, and a response rate of 95%. The…

Revisualising Innovative Online Learning Spaces in an Early Childhood Teacher Education Programme

ERIC Educational Resources Information Center

Pohio, Lesley; Lee, Maryann

2012-01-01

This paper presents a descriptive analysis of the challenges and rewards of revisualising and designing an innovative online space for a first-year Bachelor of Education Early Childhood Education course, Visual Arts in the Early Years. The perspectives offered are drawn from a design project involving collaboration between the course lecturer and…

Phase B: Final definition and preliminary design study for the initial Atmospheric Cloud Physics Laboratory (ACPL): A spacelab mission payload. Final review (DR-MA-03)

NASA Technical Reports Server (NTRS)

Clausen, O. W.

1976-01-01

Systems design for an initial atmospheric cloud physics laboratory to study microphysical processes in zero gravity is presented. Included are descriptions of the fluid, thermal, mechanical, control and data, and electrical distribution interfaces with Spacelab. Schedule and cost analysis are discussed.

School-Based Peer-Related Social Competence Interventions for Children with Autism Spectrum Disorder: A Meta-Analysis and Descriptive Review of Single Case Research Design Studies

ERIC Educational Resources Information Center

Whalon, Kelly J.; Conroy, Maureen A.; Martinez, Jose R.; Werch, Brittany L.

2015-01-01

The purpose of this review was to critically examine and summarize the impact of school-based interventions designed to facilitate the peer-related social competence of children with autism spectrum disorder (ASD). Reviewed studies employed a single-case experimental design, targeted peer-related social competence, included children 3-12 years old…

System design package for SIMS prototype system 4, solar heating and domestic hot water

NASA Technical Reports Server (NTRS)

1978-01-01

The system consisted of a modular designed prepackaged solar unit, containing solar collectors, a rock storage container, blowers, dampers, ducting, air-to-water heat exchanger, DHW preheat tank, piping, and system controls. The system was designed to be installed adjacent to a small single family dwelling. The description, performance specification, subsystem drawings, verification plan/procedure, and hazard analysis of the system were packaged for evaluation.

A discussion on turbine design for safe operation

NASA Astrophysics Data System (ADS)

Brekke, H.

2012-11-01

The paper gives a brief description of the hydraulic design of Francis and Pelton runners. The dynamic behaviour at part load has been a major problem for low head and medium head Francis turbines. The main reason for this has been inter blade separation and unstable swirl flow in the draft tube. A description is given on the hydraulic design of X-BLADE runners to obtain stable operation on the whole range of operation by reducing the cross flow. A classical theoretical analysis is also given on the dynamic hydraulic load on Pelton buckets. Several CFD analyses of this non stationary flow have been presented during the last decade, but the velocity distribution in the jets have not been correct. Experimental research work is presented on the complexity of this problem.

Apollo experience report: S-band system signal design and analysis

NASA Technical Reports Server (NTRS)

Rosenberg, H. R. (Editor)

1972-01-01

A description is given of the Apollo communications-system engineering-analysis effort that ensured the adequacy, performance, and interface compatibility of the unified S-band system elements for a successful lunar-landing mission. The evolution and conceptual design of the unified S-band system are briefly reviewed from a historical viewpoint. A comprehensive discussion of the unified S-band elements includes the salient design features of the system and serves as a basis for a better understanding of the design decisions and analyses. The significant design decisions concerning the Apollo communications-system signal design are discussed providing an insight into the role of systems analysis in arriving at the current configuration of the Apollo communications system. Analyses are presented concerning performance estimation (mathematical-model development through real-time mission support) and system deficiencies, modifications, and improvements.

Descriptive and experimental analyses of variables maintaining self-injurious behavior.

PubMed Central

Lerman, D C; Iwata, B A

1993-01-01

Independent descriptive (correlational) and functional (experimental) analyses were conducted to determine the extent to which the two methods would yield data supporting similar conclusions about variables maintaining the self-injurious behavior (SIB) of 6 subjects. For the descriptive analyses, subjects were observed in their residences and at training sites at various times each day while observers recorded naturally occurring sequences of specified subject and staff behaviors. The subjects also participated in a day program for the assessment and treatment of SIB, in which they were exposed to functional analyses that manipulated potential maintaining variables in multielement designs. Both sets of data were analyzed via conditional probabilities to identify relevant antecedent and consequent events for subjects' SIB. Using outcomes of the experimental analysis as the standard for comparison, results indicated that the descriptive analysis was useful in identifying the extent to which SIB was related to social versus nonsocial contingencies, but was limited in its ability to distinguish between positive and negative reinforcement (i.e., attention versus escape). PMID:8407680

An Investigation of Civilians Preparedness to Compete with Individuals with Military Experience for Army Board Select Acquisition Positions

DTIC Science & Technology

2017-05-25

37 Research Design ... research employed a mixed research methodology – quantitative with descriptive statistical analysis and qualitative with a thematic analysis approach...mixed research methodology – quantitative and qualitative, using interviews to collect the data. The interviews included demographic and open-ended

Economic Evaluation of Observatory Solar-Energy System

NASA Technical Reports Server (NTRS)

1982-01-01

Long-term economic performance of a commercial solar-energy system was analyzed and used to predict economic performance at four additional sites. Analysis described in report was done to demonstrate viability of design over a broad range of environmental/economic conditions. Topics covered are system description, study approach, economic analysis and system optimization.

Teaching for Art Criticism: Incorporating Feldman's Critical Analysis Learning Model in Students' Studio Practice

ERIC Educational Resources Information Center

Subramaniam, Maithreyi; Hanafi, Jaffri; Putih, Abu Talib

2016-01-01

This study adopted 30 first year graphic design students' artwork, with critical analysis using Feldman's model of art criticism. Data were analyzed quantitatively; descriptive statistical techniques were employed. The scores were viewed in the form of mean score and frequencies to determine students' performances in their critical ability.…

On the next generation of reliability analysis tools

NASA Technical Reports Server (NTRS)

Babcock, Philip S., IV; Leong, Frank; Gai, Eli

1987-01-01

The current generation of reliability analysis tools concentrates on improving the efficiency of the description and solution of the fault-handling processes and providing a solution algorithm for the full system model. The tools have improved user efficiency in these areas to the extent that the problem of constructing the fault-occurrence model is now the major analysis bottleneck. For the next generation of reliability tools, it is proposed that techniques be developed to improve the efficiency of the fault-occurrence model generation and input. Further, the goal is to provide an environment permitting a user to provide a top-down design description of the system from which a Markov reliability model is automatically constructed. Thus, the user is relieved of the tedious and error-prone process of model construction, permitting an efficient exploration of the design space, and an independent validation of the system's operation is obtained. An additional benefit of automating the model construction process is the opportunity to reduce the specialized knowledge required. Hence, the user need only be an expert in the system he is analyzing; the expertise in reliability analysis techniques is supplied.

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2011 CFR

2011-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT... must my description of well drilling design criteria address? Your description of well drilling design... drilling and the completion phases, including the anticipated surface pressure used for designing the...

System engineering toolbox for design-oriented engineers

NASA Technical Reports Server (NTRS)

Goldberg, B. E.; Everhart, K.; Stevens, R.; Babbitt, N., III; Clemens, P.; Stout, L.

1994-01-01

This system engineering toolbox is designed to provide tools and methodologies to the design-oriented systems engineer. A tool is defined as a set of procedures to accomplish a specific function. A methodology is defined as a collection of tools, rules, and postulates to accomplish a purpose. For each concept addressed in the toolbox, the following information is provided: (1) description, (2) application, (3) procedures, (4) examples, if practical, (5) advantages, (6) limitations, and (7) bibliography and/or references. The scope of the document includes concept development tools, system safety and reliability tools, design-related analytical tools, graphical data interpretation tools, a brief description of common statistical tools and methodologies, so-called total quality management tools, and trend analysis tools. Both relationship to project phase and primary functional usage of the tools are also delineated. The toolbox also includes a case study for illustrative purposes. Fifty-five tools are delineated in the text.

Research Education in Undergraduate Occupational Therapy Programs.

ERIC Educational Resources Information Center

Petersen, Paul; And Others

1992-01-01

Of 63 undergraduate occupational therapy programs surveyed, the 38 responses revealed some common areas covered: elementary descriptive statistics, validity, reliability, and measurement. Areas underrepresented include statistical analysis with or without computers, research design, and advanced statistics. (SK)

Development of a Rational Modeling Approach for the Design, and Optimization of the Multifiltration Unit. Volume 1

NASA Technical Reports Server (NTRS)

Hand, David W.; Crittenden, John C.; Ali, Anisa N.; Bulloch, John L.; Hokanson, David R.; Parrem, David L.

1996-01-01

This thesis includes the development and verification of an adsorption model for analysis and optimization of the adsorption processes within the International Space Station multifiltration beds. The fixed bed adsorption model includes multicomponent equilibrium and both external and intraparticle mass transfer resistances. Single solute isotherm parameters were used in the multicomponent equilibrium description to predict the competitive adsorption interactions occurring during the adsorption process. The multicomponent equilibrium description used the Fictive Component Analysis to describe adsorption in unknown background matrices. Multicomponent isotherms were used to validate the multicomponent equilibrium description. Column studies were used to develop and validate external and intraparticle mass transfer parameter correlations for compounds of interest. The fixed bed model was verified using a shower and handwash ersatz water which served as a surrogate to the actual shower and handwash wastewater.

MOD-0A 200 kW wind turbine generator design and analysis report

NASA Astrophysics Data System (ADS)

Anderson, T. S.; Bodenschatz, C. A.; Eggers, A. G.; Hughes, P. S.; Lampe, R. F.; Lipner, M. H.; Schornhorst, J. R.

1980-08-01

The design, analysis, and initial performance of the MOD-OA 200 kW wind turbine generator at Clayton, NM is documented. The MOD-OA was designed and built to obtain operation and performance data and experience in utility environments. The project requirements, approach, system description, design requirements, design, analysis, system tests, installation, safety considerations, failure modes and effects analysis, data acquisition, and initial performance for the wind turbine are discussed. The design and analysis of the rotor, drive train, nacelle equipment, yaw drive mechanism and brake, tower, foundation, electricl system, and control systems are presented. The rotor includes the blades, hub, and pitch change mechanism. The drive train includes the low speed shaft, speed increaser, high speed shaft, and rotor brake. The electrical system includes the generator, switchgear, transformer, and utility connection. The control systems are the blade pitch, yaw, and generator control, and the safety system. Manual, automatic, and remote control are discussed. Systems analyses on dynamic loads and fatigue are presented.

MOD-0A 200 kW wind turbine generator design and analysis report

NASA Technical Reports Server (NTRS)

Anderson, T. S.; Bodenschatz, C. A.; Eggers, A. G.; Hughes, P. S.; Lampe, R. F.; Lipner, M. H.; Schornhorst, J. R.

1980-01-01

The design, analysis, and initial performance of the MOD-OA 200 kW wind turbine generator at Clayton, NM is documented. The MOD-OA was designed and built to obtain operation and performance data and experience in utility environments. The project requirements, approach, system description, design requirements, design, analysis, system tests, installation, safety considerations, failure modes and effects analysis, data acquisition, and initial performance for the wind turbine are discussed. The design and analysis of the rotor, drive train, nacelle equipment, yaw drive mechanism and brake, tower, foundation, electricl system, and control systems are presented. The rotor includes the blades, hub, and pitch change mechanism. The drive train includes the low speed shaft, speed increaser, high speed shaft, and rotor brake. The electrical system includes the generator, switchgear, transformer, and utility connection. The control systems are the blade pitch, yaw, and generator control, and the safety system. Manual, automatic, and remote control are discussed. Systems analyses on dynamic loads and fatigue are presented.

MSFC Skylab structures and mechanical systems mission evaluation

NASA Technical Reports Server (NTRS)

1974-01-01

A performance analysis for structural and mechanical major hardware systems and components is presented. Development background testing, modifications, and requirement adjustments are included. Functional narratives are provided for comparison purposes as are predicted design performance criterion. Each item is evaluated on an individual basis: that is, (1) history (requirements, design, manufacture, and test); (2) in-orbit performance (description and analysis); and (3) conclusions and recommendations regarding future space hardware application. Overall, the structural and mechanical performance of the Skylab hardware was outstanding.

Respiratory protective device design using control system techniques

NASA Technical Reports Server (NTRS)

Burgess, W. A.; Yankovich, D.

1972-01-01

The feasibility of a control system analysis approach to provide a design base for respiratory protective devices is considered. A system design approach requires that all functions and components of the system be mathematically identified in a model of the RPD. The mathematical notations describe the operation of the components as closely as possible. The individual component mathematical descriptions are then combined to describe the complete RPD. Finally, analysis of the mathematical notation by control system theory is used to derive compensating component values that force the system to operate in a stable and predictable manner.

Study designs, use of statistical tests, and statistical analysis software choice in 2015: Results from two Pakistani monthly Medline indexed journals.

PubMed

Shaikh, Masood Ali

2017-09-01

Assessment of research articles in terms of study designs used, statistical tests applied and the use of statistical analysis programmes help determine research activity profile and trends in the country. In this descriptive study, all original articles published by Journal of Pakistan Medical Association (JPMA) and Journal of the College of Physicians and Surgeons Pakistan (JCPSP), in the year 2015 were reviewed in terms of study designs used, application of statistical tests, and the use of statistical analysis programmes. JPMA and JCPSP published 192 and 128 original articles, respectively, in the year 2015. Results of this study indicate that cross-sectional study design, bivariate inferential statistical analysis entailing comparison between two variables/groups, and use of statistical software programme SPSS to be the most common study design, inferential statistical analysis, and statistical analysis software programmes, respectively. These results echo previously published assessment of these two journals for the year 2014.

78 FR 34589 - Descriptive Designation for Needle- or Blade-Tenderized (Mechanically Tenderized) Beef Products

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-10

... Service 9 CFR Part 317 [Docket No. FSIS-2008-0017] RIN 0583-AD45 Descriptive Designation for Needle- or... require the use of the descriptive designation ``mechanically tenderized'' on the labels of raw or...'' products. FSIS is proposing that the product name for such beef products include the descriptive...

Development, fabrication and evaluation of composite thermal engine insulation

NASA Technical Reports Server (NTRS)

1973-01-01

Foil enclosure configurations of 10 variations were fabricated and evaluated. A discussion of the thermal protection system panel design includes: (1) description of 3DSX/foil concept, (2) design environment, (3) material selection, (4) fabrication enclosure, (5) structural design, (6) thermal sizing, and (7) weight analysis. The structural design study includes foil evaluation, venting pressure loads, thermomechanical behavior, and enclosure venting (burst) pressure tests. Results of experimental demonstrations of performance and reuse capabilities are given for both thermal and acoustic testing.

Witnessing of Cheating-in-Exams Behavior and Factors Sustaining Integrity

ERIC Educational Resources Information Center

Starovoytova, Diana; Arimi, Milton

2017-01-01

This study is a fraction of a larger research on cheating, at the School of Engineering (SOE). The study design used a descriptive survey approach and a document analysis. A designed confidential self-report questioner was used as the main instrument, for this study, with the sample size of 100 subjects and response rate of 95%. The tool was…

Born Too Soon: What Can We Expect? Nature of Home Literacy Experiences for Children with Very Low Birth Weight

ERIC Educational Resources Information Center

Ragusa, G.

2009-01-01

This study documents the home literacy experiences of children born with very low birth weight (VLBW). The study's design was modelled after Purcell-Gates' study of social domains mediated by print as home literacy experiences. A design combining purposeful sampling, semi-structured data collection and descriptive case study analysis was employed…

Using Learning Analytics to Enhance Student Learning in Online Courses Based on Quality Matters Standards

ERIC Educational Resources Information Center

Martin, Florence; Ndoye, Abdou; Wilkins, Patricia

2016-01-01

Quality Matters is recognized as a rigorous set of standards that guide the designer or instructor to design quality online courses. We explore how Quality Matters standards guide the identification and analysis of learning analytics data to monitor and improve online learning. Descriptive data were collected for frequency of use, time spent, and…

Conventional Gymnasium vs. Geodesic Field House. A Comparative Study of High School Physical Education and Assembly Facilities.

ERIC Educational Resources Information Center

Educational Facilities Labs., Inc., New York, NY.

A description is presented of the design features of a high school's geodesic dome field house. Following consideration of various design features and criteria for the physical education facility, a comprehensive analysis is given of comparative costs of a geodesic dome field house and conventional gymnasium. On the basis of the study it would…

Getting past first base: Going all the way with Cognitive Work Analysis.

PubMed

McIlroy, Rich C; Stanton, Neville A

2011-01-01

This paper reports the application of Cognitive Work Analysis (CWA) to the problem of communications planning in military aviation. Applications of CWA rarely get beyond the first one or two phases; this paper presents an analysis in which all five phases have been completed. The method offers a formative description of the system, defining the set of boundaries and constraints that shape system activity in terms of work domain, recurring activities, decision making, social organisation and worker competency requirements. It is an analysis that is well suited to environments in which the occurrence of unanticipated events can have serious implications for both safety and productivity. Communications planning in military aviation is such an environment. The outputs of the analysis provided an extensive and exhaustive description of the system, highlighting the uneven spread of activity, across actors involved in communications planning and across the situations in which planning can occur. In addition, a new method for informing worker competency requirements based on abstract functions rather than specific decision steps is proposed and discussed in terms of job design, interface design, and person specification. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Improvements to a method for the geometrically nonlinear analysis of compressively loaded stiffened composite panels

NASA Technical Reports Server (NTRS)

Stoll, Frederick

1993-01-01

The NLPAN computer code uses a finite-strip approach to the analysis of thin-walled prismatic composite structures such as stiffened panels. The code can model in-plane axial loading, transverse pressure loading, and constant through-the-thickness thermal loading, and can account for shape imperfections. The NLPAN code represents an attempt to extend the buckling analysis of the VIPASA computer code into the geometrically nonlinear regime. Buckling mode shapes generated using VIPASA are used in NLPAN as global functions for representing displacements in the nonlinear regime. While the NLPAN analysis is approximate in nature, it is computationally economical in comparison with finite-element analysis, and is thus suitable for use in preliminary design and design optimization. A comprehensive description of the theoretical approach of NLPAN is provided. A discussion of some operational considerations for the NLPAN code is included. NLPAN is applied to several test problems in order to demonstrate new program capabilities, and to assess the accuracy of the code in modeling various types of loading and response. User instructions for the NLPAN computer program are provided, including a detailed description of the input requirements and example input files for two stiffened-panel configurations.

The electrical power subsystem design for the high energy solar physics spacecraft concepts

NASA Technical Reports Server (NTRS)

Kulkarni, Milind

1993-01-01

This paper discusses the Electrical Power Subsystem (EPS) requirements, architecture, design description, performance analysis, and heritage of the components for two spacecraft concepts for the High Energy Solar Physics (HESP) Mission. It summarizes the mission requirements and the spacecraft subsystems and instrument power requirements, and it describes the EPS architecture for both options. A trade study performed on the selection of the solar cells - body mounted versus deployed panels - and the optimum number of panels is also presented. Solar cell manufacturing losses, array manufacturing losses, and the radiation and temperature effects on the GaAs/Ge and Si solar cells were considered part of the trade study and are included in this paper. Solar cell characteristics, cell circuit description, and the solar array area design are presented, as is battery sizing analysis performed based on the power requirements during launch and initial spacecraft operations. This paper discusses Earth occultation periods and the battery power requirements during this period as well as shunt control, battery conditioning, and bus regulation schemes. Design margins, redundancy philosophy, and predicted on-orbit battery and solar cell performance are summarized. Finally, the heritage of the components and technology risk assessment are provided.

High bit rate convolutional channel encoder/decoder

NASA Technical Reports Server (NTRS)

1977-01-01

A detailed description of the design approach and tradeoffs encountered during the development of the 50 MBPS decoder system is presented. A functional analysis of each of the major logical functions is given, and the system's major components are listed.

PICASSO: an end-to-end image simulation tool for space and airborne imaging systems

NASA Astrophysics Data System (ADS)

Cota, Steve A.; Bell, Jabin T.; Boucher, Richard H.; Dutton, Tracy E.; Florio, Chris J.; Franz, Geoffrey A.; Grycewicz, Thomas J.; Kalman, Linda S.; Keller, Robert A.; Lomheim, Terrence S.; Paulson, Diane B.; Willkinson, Timothy S.

2008-08-01

The design of any modern imaging system is the end result of many trade studies, each seeking to optimize image quality within real world constraints such as cost, schedule and overall risk. Image chain analysis - the prediction of image quality from fundamental design parameters - is an important part of this design process. At The Aerospace Corporation we have been using a variety of image chain analysis tools for many years, the Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) among them. In this paper we describe our PICASSO tool, showing how, starting with a high quality input image and hypothetical design descriptions representative of the current state of the art in commercial imaging satellites, PICASSO can generate standard metrics of image quality in support of the decision processes of designers and program managers alike.

PICASSO: an end-to-end image simulation tool for space and airborne imaging systems

NASA Astrophysics Data System (ADS)

Cota, Stephen A.; Bell, Jabin T.; Boucher, Richard H.; Dutton, Tracy E.; Florio, Christopher J.; Franz, Geoffrey A.; Grycewicz, Thomas J.; Kalman, Linda S.; Keller, Robert A.; Lomheim, Terrence S.; Paulson, Diane B.; Wilkinson, Timothy S.

2010-06-01

The design of any modern imaging system is the end result of many trade studies, each seeking to optimize image quality within real world constraints such as cost, schedule and overall risk. Image chain analysis - the prediction of image quality from fundamental design parameters - is an important part of this design process. At The Aerospace Corporation we have been using a variety of image chain analysis tools for many years, the Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) among them. In this paper we describe our PICASSO tool, showing how, starting with a high quality input image and hypothetical design descriptions representative of the current state of the art in commercial imaging satellites, PICASSO can generate standard metrics of image quality in support of the decision processes of designers and program managers alike.

What's in a Name? The Incorrect Use of Case Series as a Study Design Label in Studies Involving Dogs and Cats.

PubMed

Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A

2017-07-01

Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Methods for the design and analysis of power optimized finite-state machines using clock gating

NASA Astrophysics Data System (ADS)

Chodorowski, Piotr

2017-11-01

The paper discusses two methods of design of power optimized FSMs. Both methods use clock gating techniques. The main objective of the research was to write a program capable of generating automatic hardware description of finite-state machines in VHDL and testbenches to help power analysis. The creation of relevant output files is detailed step by step. The program was tested using the LGSynth91 FSM benchmark package. An analysis of the generated circuits shows that the second method presented in this paper leads to significant reduction of power consumption.

Extra-Vehicular Activity (EVA) glove evaluation test protocol

NASA Technical Reports Server (NTRS)

Hinman-Sweeney, E. M.

1994-01-01

One of the most critical components of a space suit is the gloves, yet gloves have traditionally presented significant design challenges. With continued efforts at glove development, a method for evaluating glove performance is needed. This paper presents a pressure-glove evaluation protocol. A description of this evaluation protocol, and its development is provided. The protocol allows comparison of one glove design to another, or any one design to bare-handed performance. Gloves for higher pressure suits may be evaluated at current and future design pressures to drive out differences in performance due to pressure effects. Using this protocol, gloves may be evaluated during design to drive out design problems and determine areas for improvement, or fully mature designs may be evaluated with respect to mission requirements. Several different test configurations are presented to handle these cases. This protocol was run on a prototype glove. The prototype was evaluated at two operating pressures and in the unpressurized state, with results compared to bare-handed performance. Results and analysis from this test series are provided, as is a description of the configuration used for this test.

linkedISA: semantic representation of ISA-Tab experimental metadata.

PubMed

González-Beltrán, Alejandra; Maguire, Eamonn; Sansone, Susanna-Assunta; Rocca-Serra, Philippe

2014-01-01

Reporting and sharing experimental metadata- such as the experimental design, characteristics of the samples, and procedures applied, along with the analysis results, in a standardised manner ensures that datasets are comprehensible and, in principle, reproducible, comparable and reusable. Furthermore, sharing datasets in formats designed for consumption by humans and machines will also maximize their use. The Investigation/Study/Assay (ISA) open source metadata tracking framework facilitates standards-compliant collection, curation, visualization, storage and sharing of datasets, leveraging on other platforms to enable analysis and publication. The ISA software suite includes several components used in increasingly diverse set of life science and biomedical domains; it is underpinned by a general-purpose format, ISA-Tab, and conversions exist into formats required by public repositories. While ISA-Tab works well mainly as a human readable format, we have also implemented a linked data approach to semantically define the ISA-Tab syntax. We present a semantic web representation of the ISA-Tab syntax that complements ISA-Tab's syntactic interoperability with semantic interoperability. We introduce the linkedISA conversion tool from ISA-Tab to the Resource Description Framework (RDF), supporting mappings from the ISA syntax to multiple community-defined, open ontologies and capitalising on user-provided ontology annotations in the experimental metadata. We describe insights of the implementation and how annotations can be expanded driven by the metadata. We applied the conversion tool as part of Bio-GraphIIn, a web-based application supporting integration of the semantically-rich experimental descriptions. Designed in a user-friendly manner, the Bio-GraphIIn interface hides most of the complexities to the users, exposing a familiar tabular view of the experimental description to allow seamless interaction with the RDF representation, and visualising descriptors to drive the query over the semantic representation of the experimental design. In addition, we defined queries over the linkedISA RDF representation and demonstrated its use over the linkedISA conversion of datasets from Nature' Scientific Data online publication. Our linked data approach has allowed us to: 1) make the ISA-Tab semantics explicit and machine-processable, 2) exploit the existing ontology-based annotations in the ISA-Tab experimental descriptions, 3) augment the ISA-Tab syntax with new descriptive elements, 4) visualise and query elements related to the experimental design. Reasoning over ISA-Tab metadata and associated data will facilitate data integration and knowledge discovery.

Comparative Analysis of English Language Student's School Paths at a Mexico University

ERIC Educational Resources Information Center

Robelo, Octaviano García; Marquez, Jorge Hernández; Pérez, Ileana Casasola

2017-01-01

Seven factors related to academic paths of students of the Bachelor of English Language of a public university in Mexico are investigated. With a non-experimental descriptive design, a Likert scale was applied to evaluate the college students' perception of these factors. A comparative analysis between three types of school paths was performed. It…

SIMREL: Software for Coefficient Alpha and Its Confidence Intervals with Monte Carlo Studies

ERIC Educational Resources Information Center

Yurdugul, Halil

2009-01-01

This article describes SIMREL, a software program designed for the simulation of alpha coefficients and the estimation of its confidence intervals. SIMREL runs on two alternatives. In the first one, if SIMREL is run for a single data file, it performs descriptive statistics, principal components analysis, and variance analysis of the item scores…

Physical and Cognitive-Affective Factors Associated with Fatigue in Individuals with Fibromyalgia: A Multiple Regression Analysis

ERIC Educational Resources Information Center

Muller, Veronica; Brooks, Jessica; Tu, Wei-Mo; Moser, Erin; Lo, Chu-Ling; Chan, Fong

2015-01-01

Purpose: The main objective of this study was to determine the extent to which physical and cognitive-affective factors are associated with fibromyalgia (FM) fatigue. Method: A quantitative descriptive design using correlation techniques and multiple regression analysis. The participants consisted of 302 members of the National Fibromyalgia &…

Analysis of Job Announcements and the Required Competencies for Instructional Technology Professionals.

ERIC Educational Resources Information Center

Moallem, Mahnaz

A study was conducted to analyze current job announcements in the field of instructional design and technology and to produce descriptive information that portrays the required skills and areas of knowledge for instructional technology graduates. Content analysis, in its general terms, was used as the research method for this study. One hundred…

ACMRDD Acccreditation: Analysis of Nationwide Survey Results, 1980-1984. Public Policy Monograph Series Number 20.

ERIC Educational Resources Information Center

Hemp, Richard; Braddock, David

This analysis of survey activities of the Accreditation Council for Services for Mentally Retarded and Other Developmentally Disabled Persons (ACMRDD) is designed to provide program administrators and state agency officials with comprehensive descriptive information on 296 surveys conducted by the council from 1980 through 1984. Part I of this…

Analysis of Students Attrition in the Sciences Subjects Areas in Ambrose Alli University, Ekpoma

ERIC Educational Resources Information Center

Olusi, F. I.; Akahomen, D. O.; Otete, C. O.

2013-01-01

The study, analysis of student's attrition in Ambrose Alli University (AAU) Ekpoma Nigeria was carried out to determine the exact number of students who attrite from selected faculties of the university. The study employed the descriptive survey design. Three hypotheses were stated and tested. On the hypothesis which tested the general attrition…

The Relationship of Core Self-Evaluations and Life Satisfaction in College Students with Disabilities: Evaluation of a Mediator Model

ERIC Educational Resources Information Center

Smedema, Susan Miller; Chan, Fong; Yaghmaian, Rana A.; Cardoso, Elizabeth DaSilva; Muller, Veronica; Keegan, John; Dutta, Alo; Ebener, Deborah J.

2015-01-01

This study examined the factorial structure of the construct core self-evaluations (CSE) and tested a mediational model of the relationship between CSE and life satisfaction in college students with disabilities. We conducted a quantitative descriptive design using exploratory and confirmatory factor analysis and multiple regression analysis.…

Tracking and data relay satellite system configuration and tradeoff study. Volume 5: TDRS spacecraft design, part 1

NASA Technical Reports Server (NTRS)

1972-01-01

A dual spin stabilized TDR spacecraft design is presented for low data rate (LDR) and medium data rate (MDR) user spacecraft telecommunication relay service. The relay satellite provides command and data return channels for unmanned users together with duplex voice and data communication channels for manned user spacecraft. TDRS/ground links are in the Ku band. Command links are provided at UHF for LDR users and S band for MDR users. Voice communication channels are provided at UHF/VHF for LDR users and at S band for MDR users. The spacecraft is designed for launch on the Delta 2914 with system deployment planned for 1978. This volume contains a description of the overall TDR spacecraft configuration, a detailed description of the spacecraft subsystems, a reliability analysis, and a product effectiveness plan.

Verus: A Tool for Quantitative Analysis of Finite-State Real-Time Systems.

DTIC Science & Technology

1996-08-12

Symbolic model checking is a technique for verifying finite-state concurrent systems that has been extended to handle real - time systems . Models with...up to 10(exp 30) states can often be verified in minutes. In this paper, we present a new tool to analyze real - time systems , based on this technique...We have designed a language, called Verus, for the description of real - time systems . Such a description is compiled into a state-transition graph and

On verifying a high-level design. [cost and error analysis

NASA Technical Reports Server (NTRS)

Mathew, Ben; Wehbeh, Jalal A.; Saab, Daniel G.

1993-01-01

An overview of design verification techniques is presented, and some of the current research in high-level design verification is described. Formal hardware description languages that are capable of adequately expressing the design specifications have been developed, but some time will be required before they can have the expressive power needed to be used in real applications. Simulation-based approaches are more useful in finding errors in designs than they are in proving the correctness of a certain design. Hybrid approaches that combine simulation with other formal design verification techniques are argued to be the most promising over the short term.

Designing simulator-based training: an approach integrating cognitive task analysis and four-component instructional design.

PubMed

Tjiam, Irene M; Schout, Barbara M A; Hendrikx, Ad J M; Scherpbier, Albert J J M; Witjes, J Alfred; van Merriënboer, Jeroen J G

2012-01-01

Most studies of simulator-based surgical skills training have focused on the acquisition of psychomotor skills, but surgical procedures are complex tasks requiring both psychomotor and cognitive skills. As skills training is modelled on expert performance consisting partly of unconscious automatic processes that experts are not always able to explicate, simulator developers should collaborate with educational experts and physicians in developing efficient and effective training programmes. This article presents an approach to designing simulator-based skill training comprising cognitive task analysis integrated with instructional design according to the four-component/instructional design model. This theory-driven approach is illustrated by a description of how it was used in the development of simulator-based training for the nephrostomy procedure.

Advanced space system analysis software. Technical, user, and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Zimbelman, H. F.

1981-01-01

The LASS computer program provides a tool for interactive preliminary and conceptual design of LSS. Eight program modules were developed, including four automated model geometry generators, an associated mass properties module, an appendage synthesizer module, an rf analysis module, and an orbital transfer analysis module. The existing rigid body controls analysis module was modified to permit analysis of effects of solar pressure on orbital performance. A description of each module, user instructions, and programmer information are included.

FAST FLUX TEST FACILITY CONCEPTUAL FACILTY DESIGN DESCRIPTION FOR THE INERT GAS CELL EXAMINATION FACILITY NO. 71

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1968-12-12

The purpose of this Conceptual Facility Design Description (CFDD) is to provide a technical description of the Inert Gas Cell Examination Facility such that agreement with RDT on a Conceptual Design can be reached . The CFDD also serves to establish a common understanding of the facility concept among all responsible FFTF Project parties including the Architect Engineer and Reactor Designer. Included are functions and design requirements, a physical description of the facility, safety considerations, principles of operation, and maintenance principles.

Data analysis software for the autoradiographic enhancement process. Volumes 1, 2, and 3, and appendix

NASA Technical Reports Server (NTRS)

Singh, S. P.

1979-01-01

The computer software developed to set up a method for Wiener spectrum analysis of photographic films is presented. This method is used for the quantitative analysis of the autoradiographic enhancement process. The software requirements and design for the autoradiographic enhancement process are given along with the program listings and the users manual. A software description and program listings modification of the data analysis software are included.

Design oriented structural analysis

NASA Technical Reports Server (NTRS)

Giles, Gary L.

1994-01-01

Desirable characteristics and benefits of design oriented analysis methods are described and illustrated by presenting a synoptic description of the development and uses of the Equivalent Laminated Plate Solution (ELAPS) computer code. ELAPS is a design oriented structural analysis method which is intended for use in the early design of aircraft wing structures. Model preparation is minimized by using a few large plate segments to model the wing box structure. Computational efficiency is achieved by using a limited number of global displacement functions that encompass all segments over the wing planform. Coupling with other codes is facilitated since the output quantities such as deflections and stresses are calculated as continuous functions over the plate segments. Various aspects of the ELAPS development are discussed including the analytical formulation, verification of results by comparison with finite element analysis results, coupling with other codes, and calculation of sensitivity derivatives. The effectiveness of ELAPS for multidisciplinary design application is illustrated by describing its use in design studies of high speed civil transport wing structures.

Spacelab cryogenic propellant management experiment

NASA Technical Reports Server (NTRS)

Cady, E. C.

1976-01-01

The conceptual design of a Spacelab cryogen management experiment was performed to demonstrate toe desirability and feasibility of subcritical cryogenic fluid orbital storage and supply. A description of the experimental apparatus, definition of supporting requirements, procedures, data analysis, and a cost estimate are included.

Statistical Tutorial | Center for Cancer Research

Cancer.gov

Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data.  ST is designed as a follow up to Statistical Analysis of Research Data (SARD) held in April 2018.  The tutorial will apply the general principles of statistical analysis of research data including descriptive statistics, z- and t-tests of means and mean differences, simple and multiple linear regression, ANOVA tests, and Chi-Squared distribution.

Managing Analysis Models in the Design Process

NASA Technical Reports Server (NTRS)

Briggs, Clark

2006-01-01

Design of large, complex space systems depends on significant model-based support for exploration of the design space. Integrated models predict system performance in mission-relevant terms given design descriptions and multiple physics-based numerical models. Both the design activities and the modeling activities warrant explicit process definitions and active process management to protect the project from excessive risk. Software and systems engineering processes have been formalized and similar formal process activities are under development for design engineering and integrated modeling. JPL is establishing a modeling process to define development and application of such system-level models.

Mod-5A Wind Turbine Generator Program Design Report. Volume 2: Conceptual and Preliminary Design, Book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. There are four volumes. In Volume 2, book 1 the requirements and criteria for the design are presented. The conceptual design studies, which defined a baseline configuration and determined the weights, costs and sizes of each subsystem, are described. The development and optimization of the wind turbine generator are presented through the description of the ten intermediate configurations between the conceptual and final designs. Analyses of the system's load and dynamics are presented.

Preliminary design report for OTEC stationkeeping subsystems (SKSS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-12-12

Lockheed Ocean Systems with IMODCO prepared these preliminary designs for OTEC Stationkeeping Subsystems (SKSS) under contract to NOAA in support of the Department of Energy OTEC program. The results of Tasks III, V, and VI are presented in this design report. The report consists of five sections: introduction, preliminary designs for the multiple anchor leg (MAL) and tension anchor leg (TAL), costs and schedule, and conclusions. Extensive appendixes provide detailed descriptions of design methodology and include backup calculations and data to support the results presented. The objective of this effort is to complete the preliminary designs for the barge-MAL andmore » Spar-TAL SKSS. A set of drawings is provided for each which show arrangements, configuration, component details, engineering description, and deployment plan. Loads analysis, performance assessment, and sensitivity to requirements are presented, together with the methodology employed to analyze the systems and to derive the results presented. Life cycle costs and schedule are prepared and compared on a common basis. Finally, recommendations for the Commercial Plant SKSS are presented for both platform types.« less

The MOD-OA 200 kilowatt wind turbine generator design and analysis report

NASA Astrophysics Data System (ADS)

Andersen, T. S.; Bodenschatz, C. A.; Eggers, A. G.; Hughes, P. S.; Lampe, R. F.; Lipner, M. H.; Schornhorst, J. R.

1980-08-01

The project requirements, approach, system description, design requirements, design, analysis, system tests, installation safety considerations, failure modes and effects analysis, data acquisition, and initial performance for the MOD-OA 200 kw wind turbine generator are discussed. The components, the rotor, driven train, nacelle equipment, yaw drive mechanism and brake, tower, foundation, electrical system, and control systems are presented. The rotor includes the blades, hub and pitch change mechanism. The drive train includes the low speed shaft, speed increaser, high speed shaft, and rotor brake. The electrical system includes the generator, switchgear, transformer, and utility connection. The control systems are the blade pitch, yaw, and generator control, and the safety system. Manual, automatic, and remote control and Dynamic loads and fatigue are analyzed.

The MOD-OA 200 kilowatt wind turbine generator design and analysis report

NASA Technical Reports Server (NTRS)

Andersen, T. S.; Bodenschatz, C. A.; Eggers, A. G.; Hughes, P. S.; Lampe, R. F.; Lipner, M. H.; Schornhorst, J. R.

1980-01-01

The project requirements, approach, system description, design requirements, design, analysis, system tests, installation safety considerations, failure modes and effects analysis, data acquisition, and initial performance for the MOD-OA 200 kw wind turbine generator are discussed. The components, the rotor, driven train, nacelle equipment, yaw drive mechanism and brake, tower, foundation, electrical system, and control systems are presented. The rotor includes the blades, hub and pitch change mechanism. The drive train includes the low speed shaft, speed increaser, high speed shaft, and rotor brake. The electrical system includes the generator, switchgear, transformer, and utility connection. The control systems are the blade pitch, yaw, and generator control, and the safety system. Manual, automatic, and remote control and Dynamic loads and fatigue are analyzed.

The finite element method in low speed aerodynamics

NASA Technical Reports Server (NTRS)

Baker, A. J.; Manhardt, P. D.

1975-01-01

The finite element procedure is shown to be of significant impact in design of the 'computational wind tunnel' for low speed aerodynamics. The uniformity of the mathematical differential equation description, for viscous and/or inviscid, multi-dimensional subsonic flows about practical aerodynamic system configurations, is utilized to establish the general form of the finite element algorithm. Numerical results for inviscid flow analysis, as well as viscous boundary layer, parabolic, and full Navier Stokes flow descriptions verify the capabilities and overall versatility of the fundamental algorithm for aerodynamics. The proven mathematical basis, coupled with the distinct user-orientation features of the computer program embodiment, indicate near-term evolution of a highly useful analytical design tool to support computational configuration studies in low speed aerodynamics.

Sensory characterization of a ready-to-eat sweetpotato breakfast cereal by descriptive analysis

NASA Technical Reports Server (NTRS)

Dansby, M. A.; Bovell-Benjamin, A. C.

2003-01-01

The sweetpotato [Ipomoea batatas (L.) Lam], an important industry in the United States, has been selected as a candidate crop to be grown on future long-duration space missions by NASA. Raw sweetpotato roots were processed into flour, which was used to formulate ready-to-eat breakfast cereal (RTEBC). Twelve trained panelists evaluated the sensory attributes of the extruded RTEBC using descriptive analysis. The samples were significantly different (P<0.05) for all attributes. Twelve perceived sensory attributes, which could be used to differentiate the appearance, texture, and flavor of sweetpotato RTEBC, were described. The data could be used to optimize the RTEBC and for designing studies to test its consumer acceptance.

Proceedings of the 3rd Annual Conference on Aerospace Computational Control, volume 1

NASA Technical Reports Server (NTRS)

Bernard, Douglas E. (Editor); Man, Guy K. (Editor)

1989-01-01

Conference topics included definition of tool requirements, advanced multibody component representation descriptions, model reduction, parallel computation, real time simulation, control design and analysis software, user interface issues, testing and verification, and applications to spacecraft, robotics, and aircraft.

DJANAL user's manual

NASA Technical Reports Server (NTRS)

Pitts, E. R.

1976-01-01

The DJANAL (DisJunct ANALyzer) Program provides a means for the LSI designer to format output from the Mask Analysis Program (MAP) for input to the FETLOG (FETSIM/LOGSIM) processor. This document presents a brief description of the operation of DJANAL and provides comprehensive instruction for its use.

ASSESSING ACCURACY OF NET CHANGE DERIVED FROM LAND COVER MAPS

EPA Science Inventory

Net change derived from land-cover maps provides important descriptive information for environmental monitoring and is often used as an input or explanatory variable in environmental models. The sampling design and analysis for assessing net change accuracy differ from traditio...

Pilot/vehicle model analysis of visually guided flight

NASA Technical Reports Server (NTRS)

Zacharias, Greg L.

1991-01-01

Information is given in graphical and outline form on a pilot/vehicle model description, control of altitude with simple terrain clues, simulated flight with visual scene delays, model-based in-cockpit display design, and some thoughts on the role of pilot/vehicle modeling.

Thermal-Mechanical Cyclic Test of a Composite Cryogenic Tank for Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Messinger, Ross; Pulley, John

2003-01-01

This viewgraph presentation provides an overview of thermal-mechanical cyclic tests conducted on a composite cryogenic tank designed for reusable launch vehicles. Topics covered include: a structural analysis of the composite cryogenic tank, a description of Marshall Space Flight Center's Cryogenic Structure Test Facility, cyclic test plans and accomplishments, burst test and analysis and post-testing evaluation.

Comparative Analysis of Four Manpower Nursing Requirements Models. Health Manpower References. [Nurse Planning Information Series, No. 6].

ERIC Educational Resources Information Center

Deane, Robert T.; Ro, Kong-Kyun

The analysis and description of four manpower nursing requirements models-- the Pugh-Roberts, the Vector, the Community Systems Foundation (CSF), and the Western Interstate Commission of Higher Education (WICHE)--are presented in this report. The introduction provides an overview of the project which was designed to analyze these different models.…

High-Bandwidth Tactical-Network Data Analysis in a High-Performance-Computing (HPC) Environment: Voice Call Analysis

DTIC Science & Technology

2015-09-01

Gateway 2 4. Voice Packet Flow: SIP , Session Description Protocol (SDP), and RTP 3 5. Voice Data Analysis 5 6. Call Analysis 6 7. Call Metrics 6...analysis processing is designed for a general VoIP system architecture based on Session Initiation Protocol ( SIP ) for negotiating call sessions and...employs Skinny Client Control Protocol for network communication between the phone and the local CallManager (e.g., for each dialed digit), SIP

Design of Software for Design of Finite Element for Structural Analysis. Ph.D. Thesis - Stuttgart Univ., 22 Nov. 1983

NASA Technical Reports Server (NTRS)

Helfrich, Reinhard

1987-01-01

The concepts of software engineering which allow a user of the finite element method to describe a model, to collect and to check the model data in a data base as well as to form the matrices required for a finite element calculation are examined. Next the components of the model description are conceived including the mesh tree, the topology, the configuration, the kinematic boundary conditions, the data for each element, and the loads. The possibilities for description and review of the data are considered. The concept of the segments for the modularization of the programs follows the components of the model description. The significance of the mesh tree as a globular guiding structure will be understood in view of the principle of the unity of the model, the mesh tree, and the data base. The user-friendly aspects of the software system will be summarized: the principle of language communication, the data generators, error processing, and data security.

14 CFR 161.9 - Designation of noise description methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Designation of noise description methods... TRANSPORTATION (CONTINUED) AIRPORTS NOTICE AND APPROVAL OF AIRPORT NOISE AND ACCESS RESTRICTIONS General Provisions § 161.9 Designation of noise description methods. For purposes of this part, the following...

14 CFR 161.9 - Designation of noise description methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Designation of noise description methods... TRANSPORTATION (CONTINUED) AIRPORTS NOTICE AND APPROVAL OF AIRPORT NOISE AND ACCESS RESTRICTIONS General Provisions § 161.9 Designation of noise description methods. For purposes of this part, the following...

The development of a program analysis environment for Ada

NASA Technical Reports Server (NTRS)

Brown, David B.; Carlisle, Homer W.; Chang, Kai-Hsiung; Cross, James H.; Deason, William H.; Haga, Kevin D.; Huggins, John R.; Keleher, William R. A.; Starke, Benjamin B.; Weyrich, Orville R.

1989-01-01

A unit level, Ada software module testing system, called Query Utility Environment for Software Testing of Ada (QUEST/Ada), is described. The project calls for the design and development of a prototype system. QUEST/Ada design began with a definition of the overall system structure and a description of component dependencies. The project team was divided into three groups to resolve the preliminary designs of the parser/scanner: the test data generator, and the test coverage analyzer. The Phase 1 report is a working document from which the system documentation will evolve. It provides history, a guide to report sections, a literature review, the definition of the system structure and high level interfaces, descriptions of the prototype scope, the three major components, and the plan for the remainder of the project. The appendices include specifications, statistics, two papers derived from the current research, a preliminary users' manual, and the proposal and work plan for Phase 2.

Situational Interest in Engineering Design Activities

NASA Astrophysics Data System (ADS)

Bonderup Dohn, Niels

2013-08-01

The aim of the present mixed-method study was to investigate task-based situational interest of sixth grade students (n = 46), between 12 and 14 years old, during an eight-week engineering design programme in a Science & Technology-class. Students' interests were investigated by means of a descriptive interpretative analysis of qualitative data from classroom observations and informal interviews. The analysis was complemented by a self-report survey to validate findings and determine prevalence. The analysis revealed four main sources of interest: designing inventions, trial-and-error experimentation, achieved functionality of invention, and collaboration. These sources differ in terms of stimuli factors, such as novelty, autonomy (choice), social involvement, self-generation of interest, and task goal orientation. The study shows that design tasks stimulated interest, but only to the extent that students were able to self-regulate their learning strategies.

Structural Element Testing in Support of the Design of the NASA Composite Crew Module

NASA Technical Reports Server (NTRS)

Kellas, Sotiris; Jackson, Wade C.; Thesken, John C.; Schleicher, Eric; Wagner, Perry; Kirsch, Michael T.

2012-01-01

In January 2007, the NASA Administrator and Associate Administrator for the Exploration Systems Mission Directorate chartered the NASA Engineering and Safety Center (NESC) to design, build, and test a full-scale Composite Crew Module (CCM). For the design and manufacturing of the CCM, the team adopted the building block approach where design and manufacturing risks were mitigated through manufacturing trials and structural testing at various levels of complexity. Following NASA's Structural Design Verification Requirements, a further objective was the verification of design analysis methods and the provision of design data for critical structural features. Test articles increasing in complexity from basic material characterization coupons through structural feature elements and large structural components, to full-scale structures were evaluated. This paper discusses only four elements tests three of which include joints and one that includes a tapering honeycomb core detail. For each test series included are specimen details, instrumentation, test results, a brief analysis description, test analysis correlation and conclusions.

Detailed design package for design of a video system providing optimal visual information for controlling payload and experiment operations with television

NASA Technical Reports Server (NTRS)

1975-01-01

A detailed description of a video system for controlling space shuttle payloads and experiments is presented in the preliminary design review and critical design review, first and second engineering design reports respectively, and in the final report submitted jointly with the design package. The material contained in the four subsequent sections of the package contains system descriptions, design data, and specifications for the recommended 2-view system. Section 2 contains diagrams relating to the simulation test configuration of the 2-view system. Section 3 contains descriptions and drawings of the deliverable breadboard equipment. A description of the recommended system is contained in Section 4 with equipment specifications in Section 5.

Descriptive Summaries of the Research Development Test & Evaluation. Army Appropriation FY 1984. Supporting Data FY 1984 Budget Estimate Submitted to Congress--February 1983. Volume I.

DTIC Science & Technology

1983-02-01

s.,ccesstully modeled to enhance future computer design simulations; (2) a new methodology for conduc*n dynamic analysis of vehicle mechanics was...to prelminary design methodology for tilt rotors, advancing blade concepts configuration helicopters, and compound helicopters in conjunction with...feasibility of low-level personnel parachutes has been demon- strated. A study was begun to design a free-fall water contalner. An experimental program to

Ada (Trade Name) Foundation Technology. Volume 4. Software Requirements for WIS (WWMCCS (World Wide Military Command and Control System) Information System) Text Processing Prototypes

DTIC Science & Technology

1986-12-01

graphics : The package allows a character set which can be defined by users giving the picture for a character by designating its pixels. Such characters...type lonts and gsei-oriented "help" messages tailored to the operations being performed and user expertise In general, critical design issues...other volumes include command language, software design , description and analysis tools, database management system operating systems; planning and

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.F. Beesley

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative designmore » process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.« less

Hardware description languages

NASA Technical Reports Server (NTRS)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

Cammp Team

NASA Technical Reports Server (NTRS)

Evertt, Shonn F.; Collins, Michael; Hahn, William

2008-01-01

The International Space Station (ISS) Configuration Analysis Modeling and Mass Properties (CAMMP) Team is presenting a demo of certain CAMMP capabilities at a Booz Allen Hamilton conference in San Antonio. The team will be showing pictures of low fidelity, simplified ISS models, but no dimensions or technical data. The presentation will include a brief description of the contract and task, description and picture of the Topology, description of Generic Ground Rules and Constraints (GGR&C), description of Stage Analysis with constraints applied, and wrap up with description of other tasks such as Special Studies, Cable Routing, etc. The models include conceptual Crew Exploration Vehicle (CEV) and Lunar Lander images and animations created for promotional purposes, which are based entirely on public domain conceptual images from public NASA web sites and publicly available magazine articles and are not based on any actual designs, measurements, or 3D models. Conceptual Mars rover and lander are completely conceptual and are not based on any NASA designs or data. The demonstration includes High Fidelity Computer Aided Design (CAD) models of ISS provided by the ISS 3D CAD Team which will be used in a visual display to demonstrate the capabilities of the Teamcenter Visualization software. The demonstration will include 3D views of the CAD models including random measurements that will be taken to demonstrate the measurement tool. A 3D PDF file will be demonstrated of the Blue Book fidelity assembly complete model with no vehicles attached. The 3D zoom and rotation will be displayed as well as random measurements from the measurement tool. The External Configuration Analysis and Tracking Tool (ExCATT) Microsoft Access Database will be demonstrated to show its capabilities to organize and track hardware on ISS. The data included will be part numbers, serial numbers, historical, current, and future locations, of external hardware components on station. It includes dates of all external ISS events and flights and the associated hardware changes for each event. The hardware location information does not always reveal the exact location of the hardware, only the general location. In some cases the location is a module or carrier, in other cases it is a WIF socket, handrail, or attach point. Only small portions of the data will be displayed for demonstration purposes.

Information Architecture as Reflected in Classrooms.

ERIC Educational Resources Information Center

Zhang, Xiangmin; Strand, Linda; Fisher, Nancy; Kneip, Jason; Ayoub, Olga

2002-01-01

Explores information architecture curricula at North American universities based on an analysis of 40 course descriptions available on the Web. Academic disciplines related to IA education include library and information science, information technology, business administration, literature, arts, and design as well as continuing education programs.…

Generating Alternative Proposals for the Louvre Using Procedural Modeling

NASA Astrophysics Data System (ADS)

Calogero, E.; Arnold, D.

2011-09-01

This paper presents the process of reconstructing two facade designs for the East wing of the Louvre using procedural modeling. The first proposal reconstructed is Louis Le Vau's 1662 scheme and the second is the 1668 design of the "petit conseil" that still stands today. The initial results presented show how such reconstructions may aid general and expert understanding of the two designs. It is claimed that by formalizing the facade description into a shape grammar in CityEngine, a systematized approach to a stylistic analysis is possible. It is also asserted that such an analysis is still best understood in the historical context of what is known about the contemporary design intentions of the building creators and commissioners.

Aero-Mechanical Design Methodology for Subsonic Civil Transport High-Lift Systems

NASA Technical Reports Server (NTRS)

vanDam, C. P.; Shaw, S. G.; VanderKam, J. C.; Brodeur, R. R.; Rudolph, P. K. C.; Kinney, D.

2000-01-01

In today's highly competitive and economically driven commercial aviation market, the trend is to make aircraft systems simpler and to shorten their design cycle which reduces recurring, non-recurring and operating costs. One such system is the high-lift system. A methodology has been developed which merges aerodynamic data with kinematic analysis of the trailing-edge flap mechanism with minimum mechanism definition required. This methodology provides quick and accurate aerodynamic performance prediction for a given flap deployment mechanism early on in the high-lift system preliminary design stage. Sample analysis results for four different deployment mechanisms are presented as well as descriptions of the aerodynamic and mechanism data required for evaluation. Extensions to interactive design capabilities are also discussed.

The cetaceopteryx: A global range military transport aircraft

NASA Technical Reports Server (NTRS)

Brivkalns, Chad; English, Nicole; Kazemi, Tahmineh; Kopel, Kim; Kroger, Seth; Ortega, ED

1993-01-01

This paper presents a design of a military transport aircraft capable of carrying 800,000 lbs of payload from any point in the United States to any other point in the world. Such massive airlift requires aggressive use of advanced technology and a unique configuration. The Cetaceopteyx features a joined wing, canard and six turbofan engines. The aircraft has a cost 1.07 billion (1993) dollars each. This paper presents in detail the mission description, preliminary sizing, aircraft configuration, wing design, fuselage design, empennage design, propulsion system, landing gear design, structures, drag, stability and control, systems layout, and cost analysis of the aircraft.

Application of a Network Perspective to DoD Weapon System Acquisition: An Exploratory Study

DTIC Science & Technology

2007-04-30

the course of action, and prepare for the Technology Development phase. As one could guess based on the description of...include allocating requirements and developing a design, testing the design, and preparing for production and fielding of the system. This analysis...Management and Budget (OMB) prepare the defense portion of the President’s Budget. Even though Congress normally appropriates money for only

An Analysis of the Modes and States for Generic Avionics

NASA Technical Reports Server (NTRS)

Wray, Richard B.

1993-01-01

The objective of this study was to develop a topology for describing the behavior of mission, vehicle and system/substem entities in new flight vehicle designs based on the use of open standards. It also had to define and describe the modes and states which may be used in generic avionics behavioral descriptions, describe their interrelationships, and establish a method for applying generic avionics to actual flight vehicle designs.

Development of weight/sizing design synthesis computer program. Volume 3: User Manual

NASA Technical Reports Server (NTRS)

Garrison, J. M.

1973-01-01

The user manual for the weight/sizing design synthesis program is presented. The program is applied to an analysis of the basic weight relationships for the space shuttle which contribute significant portions of the inert weight. The relationships measure the parameters of load, geometry, material, and environment. A verbal description of the processes simulated, data input procedures, output data, and values present in the program is included.

Referenced-site environmental document for a Monitored Retrievable Storage facility: backup waste management option for handling 1800 MTU per year

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silviera, D.J.; Aaberg, R.L.; Cushing, C.E.

This environmental document includes a discussion of the purpose of a monitored retrievable storage facility, a description of two facility design concepts (sealed storage cask and field drywell), a description of three reference sites (arid, warm-wet, and cold-wet), and a discussion and comparison of the impacts associated with each of the six site/concept combinations. This analysis is based on a 15,000-MTU storage capacity and a throughput rate of up to 1800 MTU per year.

Randomized controlled trials and neuro-oncology: should alternative designs be considered?

PubMed

Mansouri, Alireza; Shin, Samuel; Cooper, Benjamin; Srivastava, Archita; Bhandari, Mohit; Kondziolka, Douglas

2015-09-01

Deficiencies in design and reporting of randomized controlled trials (RCTs) hinders interpretability and critical appraisal. The reporting quality of recent RCTs in neuro-oncology was analyzed to assess adequacy of design and reporting. The MEDLINE and EMBASE databases were searched to identify non-surgical RCTs (years 2005-2014, inclusive). The CONSORT and Jadad scales were used to assess the quality of design/reporting. Studies published in 2005-2010 were compared as a cohort against studies published in 2011-2014, in terms of general characteristics and reporting quality. A PRECIS-based scale was used to designate studies on the pragmatic-explanatory continuum. Spearman's test was used to assess correlations. Regression analysis was used to assess associations. Overall 68 RCTs were identified. Studies were often chemotherapy-based (n = 41 studies) focusing upon high grade gliomas (46 %) and metastases (41 %) as the top pathologies. Multi-center trials (71 %) were frequent. The overall median CONSORT and Jadad scores were 34.5 (maximum 44) and 2 (maximum 5), respectively; these scores were similar in radiation and chemotherapy-based trials. Major areas of deficiency pertained to allocation concealment, implementation of methods, and blinding whereby less than 20 % of articles fulfilled all criteria. Description of intervention, random sequence generation, and the details regarding recruitment were also deficient; less than 50 % of studies fulfilled all criteria. Description of sample size calculations and blinding improved in later published cohorts. Journal impact factor was significantly associated with higher quality (p = 0.04). Large academic consortia, multi-center designs, ITT analysis, collaboration with biostatisticians, larger sample sizes, and studies with pragmatic objectives were more likely to achieve positive primary outcomes on univariate analysis; none of these variables were significant on multivariate analysis. Deficiencies in the quality of design/reporting of RCTs in neuro-oncology persist. Quality improvement is necessary. Consideration of alternative strategies should be considered.

Description of the control system design for the SSF PMAD DC testbed

NASA Technical Reports Server (NTRS)

Baez, Anastacio N.; Kimnach, Greg L.

1991-01-01

The Power Management and Distribution (PMAD) DC Testbed Control System for Space Station Freedom was developed using a top down approach based on classical control system and conventional terrestrial power utilities design techniques. The design methodology includes the development of a testbed operating concept. This operating concept describes the operation of the testbed under all possible scenarios. A unique set of operating states was identified and a description of each state, along with state transitions, was generated. Each state is represented by a unique set of attributes and constraints, and its description reflects the degree of system security within which the power system is operating. Using the testbed operating states description, a functional design for the control system was developed. This functional design consists of a functional outline, a text description, and a logical flowchart for all the major control system functions. Described here are the control system design techniques, various control system functions, and the status of the design and implementation.

SaaS Platform for Time Series Data Handling

NASA Astrophysics Data System (ADS)

Oplachko, Ekaterina; Rykunov, Stanislav; Ustinin, Mikhail

2018-02-01

The paper is devoted to the description of MathBrain, a cloud-based resource, which works as a "Software as a Service" model. It is designed to maximize the efficiency of the current technology and to provide a tool for time series data handling. The resource provides access to the following analysis methods: direct and inverse Fourier transforms, Principal component analysis and Independent component analysis decompositions, quantitative analysis, magnetoencephalography inverse problem solution in a single dipole model based on multichannel spectral data.

Characteristics of the Japanese Diet Described in Epidemiologic Publications: A Qualitative Systematic Review.

PubMed

Suzuki, Nozomu; Goto, Yoshihito; Ota, Haruka; Kito, Kumiko; Mano, Fumika; Joo, Erina; Ikeda, Kaori; Inagaki, Nobuya; Nakayama, Takeo

2018-01-01

International interest in the Japanese diet has grown in recent years. The aim of this systematic review was to evaluate and organize the Japanese diet and dietary characteristics from an epidemiological perspective, mainly focusing on the nutritional and dietary elements. PubMed, Web of Science, Japan Medical Abstracts Society, JDream III, and CiNii databases were searched. The eligibility criteria included research with an epidemiological study design that was either cross-sectional, cohort, or case-control-based that defined the dietary patterns of the Japanese diet using dietary pattern analysis. A total of 39 research articles that described the Japanese diet were included. The data that were extracted included the following: implementing country, location, study design, participant characteristics, key outcomes, methods used in the analysis of dietary patterns, and descriptions of the Japanese diet. As a result of the systematic review analyzing the descriptions of the Japanese diet from 39 selected articles, we were able to aggregate the descriptions into 16 categories from 33 factors. After performing a content analysis using a further aggregation of categories, we found that the top three applicable categories were soybeans/soybean-derived products, seafood, and vegetables; these were followed by rice and miso soup. The Japanese dietary content was found to be diverse based on an examination of epidemiological studies; however, we were able to aggregate the content into 16 categories. The Japanese diet is considered to be a dietary pattern that contains a combination of factors: the dietary staple, side dishes, and soup.

Atmosphere, Magnetosphere and Plasmas in Space (AMPS). Spacelab payload definition study. Volume 7, book 2: AMPS phase C/D analysis and planning document

NASA Technical Reports Server (NTRS)

1976-01-01

The results are presented of the AMPS Phase C/D (Design, Development, and Operations) program analysis and planning effort. Cost and schedule estimates are included. Although the AMPS program has been specifically addressed, these task descriptions are basically adaptable to a broader-based program incorporating additional or different Spacelab/orbiter payloads.

The Health Action Process Approach as a Motivational Model of Dietary Self-Management for People with Multiple Sclerosis: A Path Analysis

ERIC Educational Resources Information Center

Chiu, Chung-Yi; Lynch, Ruth Torkelson; Chan, Fong; Rose, Lindsey

2012-01-01

The main objective of this study was to evaluate the health action process approach (HAPA) as a motivational model for dietary self-management for people with multiple sclerosis (MS). Quantitative descriptive research design using path analysis was used. Participants were 209 individuals with MS recruited from the National MS Society and a…

Skylab indicators (event timer) (secondary display) (four-digit metabolic display)

NASA Technical Reports Server (NTRS)

Tiberg, W.

1971-01-01

The effort expended in developing the following indicators is summarized: (1) event timer; (2) secondary display; and (3) 4 digit display (metabolic). The mechanical design, vibration analysis, and thermal analysis of all these units are identical, and descriptions pertain to all three units. All problems incurred during the program are discussed along with the recommendations, conclusions, and actions taken to rectify the situations.

Rocket nozzle coolant channel thermal analysis program (E25107)

NASA Technical Reports Server (NTRS)

Thompson, W. R.

1972-01-01

A complete description of the liquid cooled rocket nozzle analysis program (E25107) is presented, including a users manual, program listing, and a sample problem. The program is recommended for use in designing liquid cooled rocket nozzles. In addition, it is adaptable to any system in which a liquid-cooled tubular structure is used to contain and direct the flow of a hot gas.

Technology for Analysis of Student Interactions With Complex Programs. Final Report for Period January 1972-February 1973.

ERIC Educational Resources Information Center

Lukas, George; Feurzeig, Wallace

A description is provided of a computer system designed to aid in the analysis of student programing work. The first section of the report consists of an overview and user's guide. In it, the system input is described in terms of a "dribble file" which records all student inputs generated; also an introduction is given to the aids…

SMART (Shop floor Modeling, Analysis and Reporting Tool Project

NASA Technical Reports Server (NTRS)

Centeno, Martha A.; Garcia, Maretys L.; Mendoza, Alicia C.; Molina, Louis A.; Correa, Daisy; Wint, Steve; Doice, Gregorie; Reyes, M. Florencia

1999-01-01

This document presents summarizes the design and prototype of the Shop floor Modeling, Analysis, and Reporting Tool (S.M.A.R.T.) A detailed description of it is found on the full documentation given to the NASA liaison. This documentation is also found on the A.R.I.S.E. Center web site, under a projected directory. Only authorized users can gain access to this site.

Predictive Ability of Pender's Health Promotion Model for Physical Activity and Exercise in People with Spinal Cord Injuries: A Hierarchical Regression Analysis

ERIC Educational Resources Information Center

Keegan, John P.; Chan, Fong; Ditchman, Nicole; Chiu, Chung-Yi

2012-01-01

The main objective of this study was to validate Pender's Health Promotion Model (HPM) as a motivational model for exercise/physical activity self-management for people with spinal cord injuries (SCIs). Quantitative descriptive research design using hierarchical regression analysis (HRA) was used. A total of 126 individuals with SCI were recruited…

Life Cycle Costing: A Working Level Approach

DTIC Science & Technology

1981-06-01

Effects Analysis ( FMEA ) ...... ................ .. 59 Logistics Performance Factors (LPFs) 60 Planning the Use of Life Cycle Cost in the Demonstration...form. Failure Mode and Effects Analysis ( FMEA ). Description. FMEA is a technique that attempts to improve the design of any particular unit. The FMEA ...failure modes and also eliminate extra parts or ones that are used to achieve more performance than is necessary (16:5-14]. Advantages. FMEA forces

Designers workbench: toward real-time immersive modeling

NASA Astrophysics Data System (ADS)

Kuester, Falko; Duchaineau, Mark A.; Hamann, Bernd; Joy, Kenneth I.; Ma, Kwan-Liu

2000-05-01

This paper introduces the Designers Workbench, a semi- immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing, and computer-aided engineering systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates form a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The Designers Workbench aims at closing this technology or 'digital gap' experienced by design and CAD engineers by transforming the classical design paradigm into its fully integrate digital and virtual analog allowing collaborative development in a semi- immersive virtual environment. This project emphasizes two key components form the classical product design cycle: freeform modeling and analysis. In the freedom modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.

Army-NASA aircrew/aircraft integration program: Phase 4 A(3)I Man-Machine Integration Design and Analysis System (MIDAS) software detailed design document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Constantine, Betsy; Murray, Jerry; Neukom, Christian; Prevost, Michael; Shankar, Renuka; Staveland, Lowell

1991-01-01

The Man-Machine Integration Design and Analysis System (MIDAS) is an integrated suite of software components that constitutes a prototype workstation to aid designers in applying human factors principles to the design of complex human-machine systems. MIDAS is intended to be used at the very early stages of conceptual design to provide an environment wherein designers can use computational representations of the crew station and operator, instead of hardware simulators and man-in-the-loop studies, to discover problems and ask 'what if' questions regarding the projected mission, equipment, and environment. This document is the Software Product Specification for MIDAS. Introductory descriptions of the processing requirements, hardware/software environment, structure, I/O, and control are given in the main body of the document for the overall MIDAS system, with detailed discussion of the individual modules included in Annexes A-J.

78 FR 69839 - Building Technologies Office Prioritization Tool

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... innovative and cost-effective energy saving solutions: Supporting research and development of high impact... Description The tool was designed to inform programmatic decision-making and facilitate the setting of... quantitative analysis to assure only the highest impact measures are the focus of further effort. The approach...

Passive Samplers for Investigations of Air Quality: Method Description, Implementation, and Comparison to Alternative Sampling Methods

EPA Science Inventory

This Paper covers the basics of passive sampler design, compares passive samplers to conventional methods of air sampling, and discusses considerations when implementing a passive sampling program. The Paper also discusses field sampling and sample analysis considerations to ensu...

EVALUATION AND ANALYSIS OF MICROSCALE FLOW AND TRANSPORT DURING REMEDIATION

EPA Science Inventory

The design of in-situ remediation is currently based on a description at the macroscopic scale. Phenomena at the pore and pore-network scales are typically lumped in terms of averaged quantities, using empirical or ad hoc expressions. These models cannot address fundamental rem...

Curriculum for Young Deaf Children.

ERIC Educational Resources Information Center

Restaino, Lillian C. R.; And Others

Presented is a curriculum designed to provide the teacher of the young deaf child with learning disabilities with a description of developmental objectives and methods for fulfilling these objectives in the areas of gross motor development, sensory motor integration, visual analysis, attention and memory, and conceptualization. The objectives are…

Using object-oriented analysis to design a multi-mission ground data system

NASA Technical Reports Server (NTRS)

Shames, Peter

1995-01-01

This paper describes an analytical approach and descriptive methodology that is adapted from Object-Oriented Analysis (OOA) techniques. The technique is described and then used to communicate key issues of system logical architecture. The essence of the approach is to limit the analysis to only service objects, with the idea of providing a direct mapping from the design to a client-server implementation. Key perspectives on the system, such as user interaction, data flow and management, service interfaces, hardware configuration, and system and data integrity are covered. A significant advantage of this service-oriented approach is that it permits mapping all of these different perspectives on the system onto a single common substrate. This services substrate is readily represented diagramatically, thus making details of the overall design much more accessible.

Analysis of a mammography teaching program based on an affordance design model.

PubMed

Luo, Ping; Eikman, Edward A; Kealy, William; Qian, Wei

2006-12-01

The wide use of computer technology in education, particularly in mammogram reading, asks for e-learning evaluation. The existing media comparative studies, learner attitude evaluations, and performance tests are problematic. Based on an affordance design model, this study examined an existing e-learning program on mammogram reading. The selection criteria include content relatedness, representativeness, e-learning orientation, image quality, program completeness, and accessibility. A case study was conducted to examine the affordance features, functions, and presentations of the selected software. Data collection and analysis methods include interviews, protocol-based document analysis, and usability tests and inspection. Also some statistics were calculated. The examination of PBE identified that this educational software designed and programmed some tools. The learner can use these tools in the process of optimizing displays, scanning images, comparing different projections, marking the region of interests, constructing a descriptive report, assessing one's learning outcomes, and comparing one's decisions with the experts' decisions. Further, PBE provides some resources for the learner to construct one's knowledge and skills, including a categorized image library, a term-searching function, and some teaching links. Besides, users found it easy to navigate and carry out tasks. The users also reacted positively toward PBE's navigation system, instructional aids, layout, pace and flow of information, graphics, and other presentation design. The software provides learners with some cognitive tools, supporting their perceptual problem-solving processes and extending their capabilities. Learners can internalize the mental models in mammogram reading through multiple perceptual triangulations, sensitization of related features, semantic description of mammogram findings, and expert-guided semantic report construction. The design of these cognitive tools and the software interface matches the findings and principles in human learning and instructional design. Working with PBE's case-based simulations and categorized gallery, learners can enrich and transfer their experience to their jobs.

Developments in steady and unsteady aerodynamics for use in aeroelastic analysis and design. [for supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Yates, E. C., Jr.; Bland, S. R.

1976-01-01

A review is given of seven research projects which are aimed at improving the generality, accuracy, and computational efficiency of steady and unsteady aerodynamic theory for use in aeroelastic analysis and design. These projects indicate three major thrusts of current research efforts: (1) more realistic representation of steady and unsteady subsonic and supersonic loads on aircraft configurations of general shape with emphasis on structural-design applications, (2) unsteady aerodynamics for application in active-controls analyses, and (3) unsteady aerodynamics for the frequently critical transonic speed range. The review of each project includes theoretical background, description of capabilities, results of application, current status, and plans for further development and use.

A descriptive study of research published in scientific nursing journals from 1985 to 2010.

PubMed

Yarcheski, Adela; Mahon, Noreen E; Yarcheski, Thomas J

2012-09-01

Numerous analyses of research published in scientific nursing journals have been examined over the past decades. However, a comprehensive analysis of trends in research has not been reported since 1980. The aim of this analysis was to review randomly selected research articles published in four scientific nursing journals for the years 1985, 1990, 1995, 2000, 2005, and 2010 to identify changes in selected aspects of research and to compare the findings with those from an earlier similar study. This descriptive study used percentages to present trends in published studies in four scientific nursing journals for twenty-five years. A total of 976 studies were identified; 50% were randomly selected for each year analyzed. The foci of the research problem, care orientation, conceptual bases, research designs, data analysis procedures, discussion of findings, and recommendations and implications were analyzed. Most studies from 1985 (66%) through 2010 (73%) focused on nursing practice issues; in 2010 they focused on primary health (46%) and chronicity (41%). A decrease in theory-testing research from 1985 (32%) to 2010 (21%), and in theory-based studies from 1985 (31%) to 2010 (22%) was noted. Qualitative studies increased from 1985 (3%) to 2010 (21%). Psychological variables and adult populations continue to be studied mainly over 25 years. For quantitative studies, there were increases in correlational designs from 1985 (35%) to 2010 (38%), experimental designs from 1985 (16%) to 2010 (18%), and methodological studies from 1985 (5%) to 2010 (24%). There were decreases in descriptive studies from 1985 (20%) to 2010 (5%), and comparative studies from 1985 (19%) to 2010 (10%). The use of multivariate statistics increased over time. In 1985, 61% of researchers did not link their findings to theory guiding the study; 52% did not in 2010. For qualitative research, approximately 50% fell in the "other category" over the 25 years; in 2010, grounded theory (15%), phenomenological (15%) and ethnographic (20%) designs were used. Trends indicated that the building of science has been slow, incremental, and subtle, as found in the earlier study. Trends suggest a growing maturity in the research designs. Copyright © 2012 Elsevier Ltd. All rights reserved.

An approach to the design and implementation of spacecraft attitude control systems

NASA Technical Reports Server (NTRS)

ODonnell, James R., Jr.; Mangus, David J.

1998-01-01

Over 39 years and a long list of missions, the guidance, navigation, and control (GN&C) groups at the Goddard Space Flight Center have gradually developed approaches to the design and implementation of successful spacecraft attitude control systems. With the recent creation of the Guidance, Navigation, and Control Center at Goddard, there is a desire to document some of these design practices to help to ensure their consistent application in the future. In this paper, we will discuss the beginnings of this effort, drawing primarily on the experience of one of the past attitude control system (ACS) groups at Goddard (what was formerly known as Code 712, the Guidance, Navigation, and Control Branch). We will discuss the analysis and design methods and criteria used, including guidelines for linear and nonlinear analysis, as well as the use of low- and high-fidelity simulation for system design and verification of performance. Descriptions of typical ACS sensor and actuator hardware will be shown, and typical sensor/actuator suites for a variety of mission types detailed. A description of the software and hardware test effort will be given, along with an attempt to make some qualitative estimates on how much effort is involved. The spacecraft and GN&C subsystem review cycles will be discussed, giving an outline of what design reviews are typically held and what information should be presented at each stage. Finally, we will point out some of the lessons learned at Goddard.

An Approach to the Design and Implementation of Spacecraft Attitude Control Systems

NASA Technical Reports Server (NTRS)

ODonnell, James R., Jr.; Mangus, David J.

1998-01-01

Over 39 years and a long list of missions, the guidance, navigation, and control (GN&C) groups at the Goddard Space Flight Center have gradually developed approaches to the design and implementation of successful spacecraft attitude control systems. With the recent creation of the Guidance, Navigation, and Control Center at Goddard, there is a desire to document some of these design practices to help to ensure their consistent application in the future. In this paper, we will discuss the beginnings of this effort, drawing primarily on the experience of one of the past attitude control system (ACS) groups at Goddard (what was formerly known as Code 712, the Guidance, Navigation, and Control Branch). We will discuss the analysis and design methods and criteria used, including guidelines for linear and nonlinear analysis, as well as the use of low- and high-fidelity simulation for system design and verification of performance. Descriptions of typical ACS sensor and actuator hardware will be shown, and typical sensor/actuator suites for a variety of mission types detailed. A description of the software and hardware test effort will be given, along with an attempt to make some qualitative estimates on how much effort is involved. The spacecraft and GN&C subsystem review cycles will be discussed, giving an outline of what design reviews are typically held and .what information should be presented at each stage. Finally, we will point out some of the lessons learned at Goddard.

Stochastic Simulation Tool for Aerospace Structural Analysis

NASA Technical Reports Server (NTRS)

Knight, Norman F.; Moore, David F.

2006-01-01

Stochastic simulation refers to incorporating the effects of design tolerances and uncertainties into the design analysis model and then determining their influence on the design. A high-level evaluation of one such stochastic simulation tool, the MSC.Robust Design tool by MSC.Software Corporation, has been conducted. This stochastic simulation tool provides structural analysts with a tool to interrogate their structural design based on their mathematical description of the design problem using finite element analysis methods. This tool leverages the analyst's prior investment in finite element model development of a particular design. The original finite element model is treated as the baseline structural analysis model for the stochastic simulations that are to be performed. A Monte Carlo approach is used by MSC.Robust Design to determine the effects of scatter in design input variables on response output parameters. The tool was not designed to provide a probabilistic assessment, but to assist engineers in understanding cause and effect. It is driven by a graphical-user interface and retains the engineer-in-the-loop strategy for design evaluation and improvement. The application problem for the evaluation is chosen to be a two-dimensional shell finite element model of a Space Shuttle wing leading-edge panel under re-entry aerodynamic loading. MSC.Robust Design adds value to the analysis effort by rapidly being able to identify design input variables whose variability causes the most influence in response output parameters.

Scalable Implementation of Finite Elements by NASA _ Implicit (ScIFEi)

NASA Technical Reports Server (NTRS)

Warner, James E.; Bomarito, Geoffrey F.; Heber, Gerd; Hochhalter, Jacob D.

2016-01-01

Scalable Implementation of Finite Elements by NASA (ScIFEN) is a parallel finite element analysis code written in C++. ScIFEN is designed to provide scalable solutions to computational mechanics problems. It supports a variety of finite element types, nonlinear material models, and boundary conditions. This report provides an overview of ScIFEi (\\Sci-Fi"), the implicit solid mechanics driver within ScIFEN. A description of ScIFEi's capabilities is provided, including an overview of the tools and features that accompany the software as well as a description of the input and output le formats. Results from several problems are included, demonstrating the efficiency and scalability of ScIFEi by comparing to finite element analysis using a commercial code.

Improving Patient Experience and Primary Care Quality for Patients With Complex Chronic Disease Using the Electronic Patient-Reported Outcomes Tool: Adopting Qualitative Methods Into a User-Centered Design Approach.

PubMed

Steele Gray, Carolyn; Khan, Anum Irfan; Kuluski, Kerry; McKillop, Ian; Sharpe, Sarah; Bierman, Arlene S; Lyons, Renee F; Cott, Cheryl

2016-02-18

Many mHealth technologies do not meet the needs of patients with complex chronic disease and disabilities (CCDDs) who are among the highest users of health systems worldwide. Furthermore, many of the development methodologies used in the creation of mHealth and eHealth technologies lack the ability to embrace users with CCDD in the specification process. This paper describes how we adopted and modified development techniques to create the electronic Patient-Reported Outcomes (ePRO) tool, a patient-centered mHealth solution to help improve primary health care for patients experiencing CCDD. This paper describes the design and development approach, specifically the process of incorporating qualitative research methods into user-centered design approaches to create the ePRO tool. Key lessons learned are offered as a guide for other eHealth and mHealth research and technology developers working with complex patient populations and their primary health care providers. Guided by user-centered design principles, interpretive descriptive qualitative research methods were adopted to capture user experiences through interviews and working groups. Consistent with interpretive descriptive methods, an iterative analysis technique was used to generate findings, which were then organized in relation to the tool design and function to help systematically inform modifications to the tool. User feedback captured and analyzed through this method was used to challenge the design and inform the iterative development of the tool. Interviews with primary health care providers (n=7) and content experts (n=6), and four focus groups with patients and carers (n=14) along with a PICK analysis-Possible, Implementable, (to be) Challenged, (to be) Killed-guided development of the first prototype. The initial prototype was presented in three design working groups with patients/carers (n=5), providers (n=6), and experts (n=5). Working group findings were broken down into categories of what works and what does not work to inform modifications to the prototype. This latter phase led to a major shift in the purpose and design of the prototype, validating the importance of using iterative codesign processes. Interpretive descriptive methods allow for an understanding of user experiences of patients with CCDD, their carers, and primary care providers. Qualitative methods help to capture and interpret user needs, and identify contextual barriers and enablers to tool adoption, informing a redesign to better suit the needs of this diverse user group. This study illustrates the value of adopting interpretive descriptive methods into user-centered mHealth tool design and can also serve to inform the design of other eHealth technologies. Our approach is particularly useful in requirements determination when developing for a complex user group and their health care providers.

A method to estimate weight and dimensions of aircraft gas turbine engines. Volume 1: Method of analysis

NASA Technical Reports Server (NTRS)

Pera, R. J.; Onat, E.; Klees, G. W.; Tjonneland, E.

1977-01-01

Weight and envelope dimensions of aircraft gas turbine engines are estimated within plus or minus 5% to 10% using a computer method based on correlations of component weight and design features of 29 data base engines. Rotating components are estimated by a preliminary design procedure where blade geometry, operating conditions, material properties, shaft speed, hub-tip ratio, etc., are the primary independent variables used. The development and justification of the method selected, the various methods of analysis, the use of the program, and a description of the input/output data are discussed.

Saugus River and Tributaries Flood Damage Reduction Study: Lynn, Malden, Revere and Saugus, Massachusetts. Section 1. Feasibility Report.

DTIC Science & Technology

1989-12-01

57 Table 5 Sensitivity Analysis - Point of Pines LPP 61 Table 6 Plan Comparison 64 Table 7 NED Plan Project Costs 96 Table 8 Estimated Operation...Costs 99 Table 13 Selected Plan/Estimated Annual Benefits 101 Table 14 Comparative Impacts - NED Regional Floodgate Plan 102 Table 15 Economic Analysis ...Includes detailed descriptions, plans and profiles and design considerations of the selected plan; coastal analysis of the shorefront; detailed project

Trajectory Reconstruction Program Milestone 2/3 Report. Volume 1. Description and Overview

DTIC Science & Technology

1974-12-16

Simulation Data Generation Missile Trajectory Error Analysis Modularized Program Guidance and Targeting Multiple Vehicle Simulation IBM 360/370 Numerical...consists of vehicle simulation subprograms designed and written in FORTRAN for CDC 6600/7600, IBM 360/370, and UNIVAC 1108/1110 series computers. The o-erall...vehicle simulation subprograms designed and written in FORTRAN fcr CDC 6600/7600, IBM 360/370, and UNIVAC l08/1110 series computers. The overall

Hypersonic ramjet experiment project. Phase 1: Computer program description, ramjet and scramjet cycle performance

NASA Technical Reports Server (NTRS)

Jackson, R. J.; Wang, T. T.

1974-01-01

A computer program was developed to describe the performance of ramjet and scramjet cycles. The program performs one dimensional calculations of the equilibrium, real-gas internal flow properties of the engine. The program can be used for the following: (1) preliminary design calculation and (2) design analysis of internal flow properties corresponding to stipulated flow areas. Only the combustion of hydrogen in air is considered in this case.

The geometry of structural equilibrium

PubMed Central

2017-01-01

Building on a long tradition from Maxwell, Rankine, Klein and others, this paper puts forward a geometrical description of structural equilibrium which contains a procedure for the graphic analysis of stress resultants within general three-dimensional frames. The method is a natural generalization of Rankine’s reciprocal diagrams for three-dimensional trusses. The vertices and edges of dual abstract 4-polytopes are embedded within dual four-dimensional vector spaces, wherein the oriented area of generalized polygons give all six components (axial and shear forces with torsion and bending moments) of the stress resultants. The relevant quantities may be readily calculated using four-dimensional Clifford algebra. As well as giving access to frame analysis and design, the description resolves a number of long-standing problems with the incompleteness of Rankine’s description of three-dimensional trusses. Examples are given of how the procedure may be applied to structures of engineering interest, including an outline of a two-stage procedure for addressing the equilibrium of loaded gridshell rooves. PMID:28405361

Student nurse-educators' construction of teacher identity from a self-evaluation perspective: A quantitative case study.

PubMed

Mukumbang, Ferdinand C; Alindekane, Leka Marcel

2017-04-01

The aim of this study was to explore the teacher identity formation dynamics of student nurse-educators about the subject matter, pedagogy and didactics. A case study using descriptive quantitative design was employed. Using a cross-sectional approach, data were collected in 2014 using a self-administered questionnaire. Participants were asked to self-evaluate their teaching competencies on the nursing subject matter, pedagogical expertise and didactical expertise. Using descriptive analysis we determined the central tendencies of the constructs. The descriptive analysis revealed a very small variance (0.0011) and standard deviation (0.04) among the means of the three constructs, which indicates a fair balance in the contribution of the subject matter, pedagogy and didactics towards teacher identity formation. Nursing student-educators can achieve a balanced combination of subject matter expert, pedagogical expert and didactical expert combination during the formation of their teacher identity. This could be indicative of how effective the training programme is in helping the students achieve a balanced teacher identity.

Towards health care process description framework: an XML DTD design.

PubMed Central

Staccini, P.; Joubert, M.; Quaranta, J. F.; Aymard, S.; Fieschi, D.; Fieschi, M.

2001-01-01

The development of health care and hospital information systems has to meet users needs as well as requirements such as the tracking of all care activities and the support of quality improvement. The use of process-oriented analysis is of-value to provide analysts with: (i) a systematic description of activities; (ii) the elicitation of the useful data to perform and record care tasks; (iii) the selection of relevant decision-making support. But paper-based tools are not a very suitable way to manage and share the documentation produced during this step. The purpose of this work is to propose a method to implement the results of process analysis according to XML techniques (eXtensible Markup Language). It is based on the IDEF0 activity modeling language (Integration DEfinition for Function modeling). A hierarchical description of a process and its components has been defined through a flat XML file with a grammar of proper metadata tags. Perspectives of this method are discussed. PMID:11825265

E-Learning: Ageing Workforce versus Technology-Savvy Generation

ERIC Educational Resources Information Center

Becker, Karen; Fleming, Julie; Keijsers, Wilhelmina

2012-01-01

Purpose: The purpose of this paper is to provide description and analysis of how a traditional industry is currently using e-learning, and to identify how the potential of e-learning can be realised whilst acknowledging the technological divide between younger and older workers. Design/methodology/approach: An exploratory qualitative methodology…

Student Participation in Dual Enrollment and College Success

ERIC Educational Resources Information Center

Jones, Stephanie J.

2014-01-01

The study investigated the impact of dual enrollment participation on the academic preparation of first-year full-time college students at a large comprehensive community college and a large research university. The research design was causal-comparative and utilized descriptive and inferential statistics. Multivariate analysis of variances were…

DESIGN FOR THINKING, A FIRST BOOK IN SEMANTICS.

ERIC Educational Resources Information Center

UPTON, ALBERT

THIS BOOK ABOUT THE FUNCTIONS OF LANGUAGE IN HUMAN LIFE EMPHASIZES LEARNING HOW TO CLASSIFY, DEFINE, AND ANALYZE. FOLLOWING AN EXPLANATION OF THE PHYSIOLOGICAL AND PSYCHOLOGICAL ROOTS OF LANGUAGE, CHAPTERS ON ANALYSIS, MEANING, SIGNS, AMBIGUITY, SEMANTIC GROWTH, AND METAPHOR LEAD TO A DESCRIPTION OF THE COMMUNICATIVE FUNCTION OF LANGUAGE,…

Recent Policy Developments in Green Education in the Netherlands

ERIC Educational Resources Information Center

Kupper, Hendrik; Laurentzen, Ramona; Mulder, Martin

2012-01-01

Purpose: To present a description of recent developments in the Dutch green educational system (agriculture, living environment, food). The article builds on a previous 2006 contribution to "JAEE" where different scenarios for changes in green education were suggested. Design/methodology/approach: An analysis of policy documents from…

Guidelines for detection, analysis, and treatment of materials-related distress in concrete pavements. Volume 2, Guidelines description and use

DOT National Transportation Integrated Search

2002-08-01

The performance of concrete pavements can be adversely affected by the concrete's inability to resist the environment in which it is placed. This lack of durability can occur even when the structural design of the pavement is adequate. The distresses...

UK Student Alcohol Consumption: A Cluster Analysis of Drinking Behaviour Typologies

ERIC Educational Resources Information Center

Craigs, Cheryl L.; Bewick, Bridgette M.; Gill, Jan; O'May, Fiona; Radley, Duncan

2012-01-01

Objective: To assess the extent to which university students are following UK Government advice regarding appropriate consumption of alcohol, and to investigate if students can be placed into distinct clusters based on their drinking behaviour. Design: A descriptive questionnaire study. Setting: One hundred and nineteen undergraduate students from…

Train the Trainer Effectiveness Trials of Behavioral Intervention for Individuals with Autism: A Systematic Review

ERIC Educational Resources Information Center

Shire, Stephanie Yoshiko; Kasari, Connie

2014-01-01

This systematic review examines train the trainer (TTT) effectiveness trials of behavioral interventions for individuals with autism spectrum disorder (ASD). Published methodological quality scales were used to assess studies including participant description, research design, intervention, outcomes, and analysis. Twelve studies including 9 weak…

Validating a Lifestyle Physical Activity Measure for People with Serious Mental Illness

ERIC Educational Resources Information Center

Bezyak, Jill L.; Chan, Fong; Chiu, Chung-Yi; Kaya, Cahit; Huck, Garrett

2014-01-01

Purpose: To evaluate the measurement structure of the "Physical Activity Scale for Individuals With Physical Disabilities" (PASIPD) as an assessment tool of lifestyle physical activities for people with severe mental illness. Method: A quantitative descriptive research design using factor analysis was employed. A sample of 72 individuals…

Antecedent-Based Interventions for Young Children at Risk for Emotional and Behavioral Disorders

ERIC Educational Resources Information Center

Park, Kristy L.; Scott, Terrance M.

2009-01-01

Following descriptive functional assessment procedures, a brief structural analysis was used to confirm the hypothesized antecedent conditions that preceded problem behavior across three children enrolled in Head Start classrooms. A withdrawal design investigated the effectiveness of antecedent-based interventions to reduce disruptive behaviors…

Home Economics Careers in Food Service. Teacher Guide.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock. Home Economics Instructional Materials Center.

These instructional materials are designed to assist teacher coordinators in teaching a course of study for home economics careers in food service in a home economics cooperative education program. Introductory materials are an overview containing job descriptions and a sample organizational chart, and a food service employee job analysis. A…

Circuit Riding: A Method for Providing Reference Services.

ERIC Educational Resources Information Center

Plunket, Linda; And Others

1983-01-01

Discussion of the design and implementation of the Circuit Rider Librarian Program, a shared services project for delivering reference services to eight hospitals in Maine, includes a cost analysis of services and description of user evaluation survey. Five references, composite results of the survey, and postgrant options proposal are appended.…

University-Industry Linkages in Developing Countries: Perceived Effect on Innovation

ERIC Educational Resources Information Center

Vaaland, Terje I.; Ishengoma, Esther

2016-01-01

Purpose: The purpose of this paper is to assess the perceptions of both universities and the resource-extractive companies on the influence of university-industry linkages (UILs) on innovation in a developing country. Design/Methodology/Approach: A total of 404 respondents were interviewed. Descriptive analysis and multinomial logistic regression…

Social Justice Advocacy in Graduate Teacher Education

ERIC Educational Resources Information Center

Hoyle, Amy Gratch

2018-01-01

This article includes a description and analysis of a graduate teacher education course designed to engage teachers in taking action for social justice. In the course, students participate in a community of learners in which they examine their cultural identities and engage in social justice advocacy work. Students developed content knowledge and…

78 FR 37226 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... Implementation Study. OMB No.: 0970-0398. Description: The Office of Data Analysis, Research, and Evaluation (HHS... Planning, Research, and Evaluation (HHS/ACF/OPRE) in the Administration for Children and Families (ACF... designed and implemented in the field, collect performance measure data for PREP programs, and assess the...

78 FR 62637 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-22

...- Component Evaluation--Data Collection Related to the Design and Implementation Study. OMB No.: 0970-0398. Description: The Office of Data Analysis, Research, and Evaluation (HHS/ACF/ACYF/ODARE) in the Administration for Children, Youth and Families (ACYF) and the Office of Planning, Research, and Evaluation (HHS/ACF...

Adolescents' Drawings: A View of Their Worlds.

ERIC Educational Resources Information Center

Chula, Marleyne

This qualitative study investigated the medium of drawings as a methodological technique for visual data analysis. The study explored graphical symbols as an additional source for descriptive, interpretive inquiry. The design focused on gaining insight into the perceptions of adolescents' experiences as expressed by the visual narratives in their…

SPELT (Strategies Program for Effective Learning/Thinking): A Description and Analysis of Instructional Procedures.

ERIC Educational Resources Information Center

Peat, D.; And Others

1989-01-01

Describes an instructional model, Strategies Program for Effective Learning/Thinking (SPELT), that was developed to translate cognitive psychological theory and research into a practical instructional program. The extent to which SPELT conforms to current instructional design principles is examined, and macro versus micro instructional sequencing…

Aerodynamic characteristics of forebody and nose strakes based on F-16 wind tunnel test experience. Volume 1: Summary and analysis

NASA Technical Reports Server (NTRS)

Smith, C. W.; Ralston, J. N.; Mann, H. W.

1979-01-01

The YF-16 and F-16 developmental wind tunnel test program was reviewed. Geometrical descriptions, general comments, representative data, and the initial efforts toward the development of design guides for the application of strakes to future aircraft are presented.

Management Expert Systems (M.E.S.): A Framework for Development and Implementation.

ERIC Educational Resources Information Center

Moser, Jorge; Christoph, Richard

1987-01-01

This description of the development of expert systems designed to solve management problems focuses on the issue of corporate divestment as an example. Software needs are discussed, and an example of a management expert system for divestment analysis at James Madison University is briefly described. (Author/LRW)

10 CFR 52.137 - Contents of applications; technical information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... limits on its operation, and presents a safety analysis of the structures, systems, and components and of... products. The description shall be sufficient to permit understanding of the system designs and their relationship to the safety evaluations. Items such as the reactor core, reactor coolant system, instrumentation...

Statistical Analysis of Research Data | Center for Cancer Research

Cancer.gov

Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data. The Statistical Analysis of Research Data (SARD) course will be held on April 5-6, 2018 from 9 a.m.-5 p.m. at the National Institutes of Health's Natcher Conference Center, Balcony C on the Bethesda Campus. SARD is designed to provide an overview on the general principles of statistical analysis of research data.  The first day will feature univariate data analysis, including descriptive statistics, probability distributions, one- and two-sample inferential statistics.

Aircraft/Air Traffic Management Functional Analysis Model. Version 2.0; User's Guide

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) a National Aeronautics and Space Administration (NASA) contract. This document provides a guide for using the model in analysis. Those interested in making enhancements or modification to the model should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Technical Description.

Radiation protective structure alternatives for habitats of a lunar base research outpost

NASA Technical Reports Server (NTRS)

Bell, Fred J.; Foo, Lai T.; Mcgrew, William P.

1988-01-01

The solar and galactic cosmic radiation levels on the Moon pose a hazard to extended manned lunar missions. Lunar soil represents an available, economical material to be used for radiation shielding. Several alternatives have been suggested to use lunar soil to protect the inhabitants of a lunar base research outpost from radiation. The Universities Space Research Association has requested that a comparative analysis of the alternatives be performed, with the purpose of developing the most advantageous design. Eight alternatives have been analyzed, including an original design which was developed to satisfy the identified design criteria. The original design consists of a cylindrical module and airlock, partially buried in the lunar soil, at a depth sufficient to achieve adequate radiation shielding. The report includes descriptions of the alternatives considered, the method of analysis used, and the final design selected.

A study of performance and cost improvement potential of the 120 inch (3.05 m) diameter solid rocket motor. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

Backlund, S. J.; Rossen, J. N.

1971-01-01

A parametric study of ballistic modifications to the 120 inch diameter solid propellant rocket engine which forms part of the Air Force Titan 3 system is presented. 576 separate designs were defined and 24 were selected for detailed analysis. Detailed design descriptions, ballistic performance, and mass property data were prepared for each design. It was determined that a relatively simple change in design parameters could provide a wide range of solid propellant rocket engine ballistic characteristics for future launch vehicle applications.

Data to inform a social media component for professional development and practices: A design-based research study.

PubMed

Novakovich, Jeanette; Shaw, Steven; Miah, Sophia

2017-02-01

This DIB article includes the course artefacts, instruments, survey data, and descriptive statistics, along with in-depth correlational analysis for the first iteration of a design-based research study on designing curriculum for developing online professional identity and social media practices for a multi-major advanced professional writing course. Raw data was entered into SPSS software. For interpretation and discussion, please see the original article entitled, "Designing curriculum to shape professional social media skills and identity in virtual communities of practice" (J. Novakovich, S. Miah, S. Shaw, 2017) [1].

Controls-Structures Interaction (CSI) technology program summary. Earth orbiting platforms program area of the space platforms technology program

NASA Technical Reports Server (NTRS)

Newsom, Jerry R.

1991-01-01

Control-Structures Interaction (CSI) technology embraces the understanding of the interaction between the spacecraft structure and the control system, and the creation and validation of concepts, techniques, and tools, for enabling the interdisciplinary design of an integrated structure and control system, rather than the integration of a structural design and a control system design. The goal of this program is to develop validated CSI technology for integrated design/analysis and qualification of large flexible space systems and precision space structures. A description of the CSI technology program is presented.

Computer-aided system design

NASA Technical Reports Server (NTRS)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

Solar array electrical performance assessment for Space Station Freedom

NASA Technical Reports Server (NTRS)

Smith, Bryan K.; Brisco, Holly

1993-01-01

Electrical power for Space Station Freedom will be generated by large Photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis, and test data to date. A description of the LMSC performance model, future test plans, and predicted performance ranges are also given.

Solar array electrical performance assessment for Space Station Freedom

NASA Technical Reports Server (NTRS)

Smith, Bryan K.; Brisco, Holly

1993-01-01

Electrical power for Space Station Freedom will be generated by large photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis and test data to date. A description of the LMSC performance model future test plans and predicted performance ranges are also given.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document (draft final). Volume 6: Lunar systems

NASA Technical Reports Server (NTRS)

1991-01-01

NASA's two Office of Space Flight (Code M) Space Transfer Vehicle (STV) contractors supported development of Space Exploration Initiative (SEI) lunar transportation concepts. This work treated lunar SEI missions as the far end of a more near-term STV program, most of whose missions were satellite delivery and servicing requirements derived from Civil Needs Data Base (CNDB) projections. Space Transfer Concepts and Analysis for Exploration Missions (STCAEM) began to address the complete design of a lunar transportation system. The following challenges were addressed: (1) the geometry of aerobraking; (2) accommodation of mixed payloads; (3) cryogenic propellant transfer in Low Lunar Orbit (LLO); (4) fully re-usable design; and (5) growth capability. The leveled requirements, derived requirements, and assumptions applied to the lunar transportation system design are discussed. The mission operations section includes data on mission analysis studies and performance parametrics as well as the operating modes and performance evaluations which include the STCAEM recommendations. Element descriptions for the lunar transportation family included are a listing of the lunar transfer vehicle/lunar excursion vehicle (LTV/LEV) components; trade studies and mass analyses of the transfer and excursion modules; advanced crew recovery vehicle (ACRV) (modified crew recovery vehicle (MCRV)) modifications required to fulfill lunar operations; the aerobrake shape and L/D to be used; and some costing methods and results. Commonality and evolution issues are also discussed.

Computer code for preliminary sizing analysis of axial-flow turbines

NASA Technical Reports Server (NTRS)

Glassman, Arthur J.

1992-01-01

This mean diameter flow analysis uses a stage average velocity diagram as the basis for the computational efficiency. Input design requirements include power or pressure ratio, flow rate, temperature, pressure, and rotative speed. Turbine designs are generated for any specified number of stages and for any of three types of velocity diagrams (symmetrical, zero exit swirl, or impulse) or for any specified stage swirl split. Exit turning vanes can be included in the design. The program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, flow angles, and last stage absolute and relative Mach numbers. An analysis is presented along with a description of the computer program input and output with sample cases. The analysis and code presented herein are modifications of those described in NASA-TN-D-6702. These modifications improve modeling rigor and extend code applicability.

Identifying consumer's needs of health information technology through an innovative participatory design approach among English- and Spanish-speaking urban older adults.

PubMed

Lucero, R; Sheehan, B; Yen, P; Velez, O; Nobile-Hernandez, D; Tiase, V

2014-01-01

We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant's needs related to information technology. The C2PD approach enabled the assessment and identification of informant's needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer's technology needs while taking into account core public health functions.

Identifying Consumer’s Needs of Health Information Technology through an Innovative Participatory Design Approach among English- and Spanish-speaking Urban Older Adults

PubMed Central

Sheehan, B.; Yen, P.; Velez, O.; Nobile-Hernandez, D.; Tiase, V.

2014-01-01

Summary Objectives We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. Methods We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant’s needs related to information technology. Results The C2PD approach enabled the assessment and identification of informant’s needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. Conclusions The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer’s technology needs while taking into account core public health functions. PMID:25589909

Some General Principles in Cryogenic Design, Implementation, and Testing

NASA Technical Reports Server (NTRS)

Dipirro, Michael James

2015-01-01

Brief Course Description: In 2 hours only the most basic principles of cryogenics can be presented. I will concentrate on the differences between a room temperature thermal analysis and cryogenic thermal analysis, namely temperature dependent properties. I will talk about practical materials for thermal contact and isolation. I will finish by describing the verification process and instrumentation used that is unique to cryogenic (in general less than 100K) systems.

Information Flow in the Launch Vehicle Design/Analysis Process

NASA Technical Reports Server (NTRS)

Humphries, W. R., Sr.; Holland, W.; Bishop, R.

1999-01-01

This paper describes the results of a team effort aimed at defining the information flow between disciplines at the Marshall Space Flight Center (MSFC) engaged in the design of space launch vehicles. The information flow is modeled at a first level and is described using three types of templates: an N x N diagram, discipline flow diagrams, and discipline task descriptions. It is intended to provide engineers with an understanding of the connections between what they do and where it fits in the overall design process of the project. It is also intended to provide design managers with a better understanding of information flow in the launch vehicle design cycle.

Propellant Chemistry for CFD Applications

NASA Technical Reports Server (NTRS)

Farmer, R. C.; Anderson, P. G.; Cheng, Gary C.

1996-01-01

Current concepts for reusable launch vehicle design have created renewed interest in the use of RP-1 fuels for high pressure and tri-propellant propulsion systems. Such designs require the use of an analytical technology that accurately accounts for the effects of real fluid properties, combustion of large hydrocarbon fuel modules, and the possibility of soot formation. These effects are inadequately treated in current computational fluid dynamic (CFD) codes used for propulsion system analyses. The objective of this investigation is to provide an accurate analytical description of hydrocarbon combustion thermodynamics and kinetics that is sufficiently computationally efficient to be a practical design tool when used with CFD codes such as the FDNS code. A rigorous description of real fluid properties for RP-1 and its combustion products will be derived from the literature and from experiments conducted in this investigation. Upon the establishment of such a description, the fluid description will be simplified by using the minimum of empiricism necessary to maintain accurate combustion analyses and including such empirical models into an appropriate CFD code. An additional benefit of this approach is that the real fluid properties analysis simplifies the introduction of the effects of droplet sprays into the combustion model. Typical species compositions of RP-1 have been identified, surrogate fuels have been established for analyses, and combustion and sooting reaction kinetics models have been developed. Methods for predicting the necessary real fluid properties have been developed and essential experiments have been designed. Verification studies are in progress, and preliminary results from these studies will be presented. The approach has been determined to be feasible, and upon its completion the required methodology for accurate performance and heat transfer CFD analyses for high pressure, tri-propellant propulsion systems will be available.

Hardware synthesis from DDL description. [simulating a digital system for computerized design of large scale integrated circuits

NASA Technical Reports Server (NTRS)

Shiva, S. G.; Shah, A. M.

1980-01-01

The details of digital systems can be conveniently input into the design automation system by means of hardware description language (HDL). The computer aided design and test (CADAT) system at NASA MSFC is used for the LSI design. The digital design language (DDL) was selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. Problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system are addressed.

Analysis of the possibility of SysML and BPMN application in formal data acquisition system description

NASA Astrophysics Data System (ADS)

Ćwikła, G.; Gwiazda, A.; Banaś, W.; Monica, Z.; Foit, K.

2017-08-01

The article presents the study of possible application of selected methods of complex description, that can be used as a support of the Manufacturing Information Acquisition System (MIAS) methodology, describing how to design a data acquisition system, allowing for collecting and processing real-time data on the functioning of a production system, necessary for management of a company. MIAS can allow conversion into Cyber-Physical Production System. MIAS is gathering and pre-processing data on the state of production system, including e.g. realisation of production orders, state of machines, materials and human resources. Systematised approach and model-based development is proposed for improving the quality of the design of MIAS methodology-based complex systems supporting data acquisition in various types of companies. Graphical specification can be the baseline for any model-based development in specified areas. The possibility of application of SysML and BPMN, both being UML-based languages, representing different approaches to modelling of requirements, architecture and implementation of the data acquisition system, as a tools supporting description of required features of MIAS, were considered.

Mechanically verified hardware implementing an 8-bit parallel IO Byzantine agreement processor

NASA Technical Reports Server (NTRS)

Moore, J. Strother

1992-01-01

Consider a network of four processors that use the Oral Messages (Byzantine Generals) Algorithm of Pease, Shostak, and Lamport to achieve agreement in the presence of faults. Bevier and Young have published a functional description of a single processor that, when interconnected appropriately with three identical others, implements this network under the assumption that the four processors step in synchrony. By formalizing the original Pease, et al work, Bevier and Young mechanically proved that such a network achieves fault tolerance. We develop, formalize, and discuss a hardware design that has been mechanically proven to implement their processor. In particular, we formally define mapping functions from the abstract state space of the Bevier-Young processor to a concrete state space of a hardware module and state a theorem that expresses the claim that the hardware correctly implements the processor. We briefly discuss the Brock-Hunt Formal Hardware Description Language which permits designs both to be proved correct with the Boyer-Moore theorem prover and to be expressed in a commercially supported hardware description language for additional electrical analysis and layout. We briefly describe our implementation.

Feasibility analysis of reciprocating magnetic heat pumps

NASA Technical Reports Server (NTRS)

Larson, A. V.; Hartley, J. G.; Shelton, S. V.; Smith, M. M.

1986-01-01

The conceptual design selected for detailed system analysis and optimization is the reciprocating gadolinium core in a regenerative fluid column within the bore of a superconducting magnet. The thermodynamic properties of gadolinium are given. A computerized literature search for relevant papers was conducted and is being analyzed. Contact was made with suppliers of superconducting magnets and accessories, magnetic materials, and various types of hardware. A description of the model for the thermal analysis of the core and regenerator fluids is included.

Analysis of multimode fiber bundles for endoscopic spectral-domain optical coherence tomography

PubMed Central

Risi, Matthew D.; Makhlouf, Houssine; Rouse, Andrew R.; Gmitro, Arthur F.

2016-01-01

A theoretical analysis of the use of a fiber bundle in spectral-domain optical coherence tomography (OCT) systems is presented. The fiber bundle enables a flexible endoscopic design and provides fast, parallelized acquisition of the OCT data. However, the multimode characteristic of the fibers in the fiber bundle affects the depth sensitivity of the imaging system. A description of light interference in a multimode fiber is presented along with numerical simulations and experimental studies to illustrate the theoretical analysis. PMID:25967012

Preliminary design of a solar central receiver for a site-specific repowering application (Saguaro Power Plant). Volume IV. Appendixes. Final report, October 1982-September 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1983-09-01

The appendixes for the Saguaro Power Plant includes the following: receiver configuration selection report; cooperating modes and transitions; failure modes analysis; control system analysis; computer codes and simulation models; procurement package scope descriptions; responsibility matrix; solar system flow diagram component purpose list; thermal storage component and system test plans; solar steam generator tube-to-tubesheet weld analysis; pipeline listing; management control schedule; and system list and definitions.

Contact dynamics recording and analysis system using an optical fiber sensor approach

NASA Astrophysics Data System (ADS)

Anghel, F.; Pavelescu, D.; Grattan, K. T. V.; Palmer, A. W.

1997-09-01

A contact dynamics recording and analysis system configured using an optical fiber sensor has been developed having been designed with a particular application to the accurate and time-varying description of moving contact operating during electrical arc breaking, in an experimental platform simulating the operation of a vacuum circuit breaker. The system utilizes dynamic displacement measurement and data recording and a post-process data analysis to reveal the dynamic speed and acceleration data of the equipment.

Investigating System Dependability Modeling Using AADL

NASA Technical Reports Server (NTRS)

Hall, Brendan; Driscoll, Kevin R.; Madl, Gabor

2013-01-01

This report describes Architecture Analysis & Design Language (AADL) models for a diverse set of fault-tolerant, embedded data networks and describes the methods and tools used to created these models. It also includes error models per the AADL Error Annex. Some networks were modeled using Error Detection Isolation Containment Types (EDICT). This report gives a brief description for each of the networks, a description of its modeling, the model itself, and evaluations of the tools used for creating the models. The methodology includes a naming convention that supports a systematic way to enumerate all of the potential failure modes.

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2010 CFR

2010-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources MINERALS MANAGEMENT SERVICE... drilling design criteria address? Your description of well drilling design criteria must address: (a) Pore... phases, including the anticipated surface pressure used for designing the production string; (g) A single...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2013 CFR

2013-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2012 CFR

2012-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

30 CFR 250.413 - What must my description of well drilling design criteria address?

Code of Federal Regulations, 2014 CFR

2014-07-01

... design criteria address? 250.413 Section 250.413 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... of well drilling design criteria address? Your description of well drilling design criteria must... the completion phases, including the anticipated surface pressure used for designing the production...

Ontology-based, Tissue MicroArray oriented, image centered tissue bank

PubMed Central

Viti, Federica; Merelli, Ivan; Caprera, Andrea; Lazzari, Barbara; Stella, Alessandra; Milanesi, Luciano

2008-01-01

Background Tissue MicroArray technique is becoming increasingly important in pathology for the validation of experimental data from transcriptomic analysis. This approach produces many images which need to be properly managed, if possible with an infrastructure able to support tissue sharing between institutes. Moreover, the available frameworks oriented to Tissue MicroArray provide good storage for clinical patient, sample treatment and block construction information, but their utility is limited by the lack of data integration with biomolecular information. Results In this work we propose a Tissue MicroArray web oriented system to support researchers in managing bio-samples and, through the use of ontologies, enables tissue sharing aimed at the design of Tissue MicroArray experiments and results evaluation. Indeed, our system provides ontological description both for pre-analysis tissue images and for post-process analysis image results, which is crucial for information exchange. Moreover, working on well-defined terms it is then possible to query web resources for literature articles to integrate both pathology and bioinformatics data. Conclusions Using this system, users associate an ontology-based description to each image uploaded into the database and also integrate results with the ontological description of biosequences identified in every tissue. Moreover, it is possible to integrate the ontological description provided by the user with a full compliant gene ontology definition, enabling statistical studies about correlation between the analyzed pathology and the most commonly related biological processes. PMID:18460177

System-Level Experimental Validations for Supersonic Commercial Transport Aircraft Entering Service in the 2018-2020 Time Period

NASA Technical Reports Server (NTRS)

Magee, Todd E.; Wilcox, Peter A.; Fugal, Spencer R.; Acheson, Kurt E.; Adamson, Eric E.; Bidwell, Alicia L.; Shaw, Stephen G.

2013-01-01

This report describes the work conducted by The Boeing Company under American Recovery and Reinvestment Act (ARRA) and NASA funding to experimentally validate the conceptual design of a supersonic airliner feasible for entry into service in the 2018 to 2020 timeframe (NASA N+2 generation). The report discusses the design, analysis and development of a low-boom concept that meets aggressive sonic boom and performance goals for a cruise Mach number of 1.8. The design is achieved through integrated multidisciplinary optimization tools. The report also describes the detailed design and fabrication of both sonic boom and performance wind tunnel models of the low-boom concept. Additionally, a description of the detailed validation wind tunnel testing that was performed with the wind tunnel models is provided along with validation comparisons with pretest Computational Fluid Dynamics (CFD). Finally, the report describes the evaluation of existing NASA sonic boom pressure rail measurement instrumentation and a detailed description of new sonic boom measurement instrumentation that was constructed for the validation wind tunnel testing.

Banning standard cell engineering notebook

NASA Technical Reports Server (NTRS)

1976-01-01

A family of standardized thick-oxide P-MOS building blocks (standard cells) is described. The information is presented in a form useful for systems designs, logic design, and the preparation of inputs to both sets of Design Automation programs for array design and analysis. A data sheet is provided for each cell and gives the cell name, the cell number, its logic symbol, Boolean equation, truth table, circuit schematic circuit composite, input-output capacitances, and revision date. The circuit type file, also given for each cell, together with the logic drawing contained on the data sheet provides all the information required to prepare input data files for the Design Automation Systems. A detailed description of the electrical design procedure is included.

Management Approaches to Stomal and Peristomal Complications: A Narrative Descriptive Study.

PubMed

Beitz, Janice M; Colwell, Janice C

2016-01-01

The purpose of this study was to identify optimal interventions for selected complications based on WOC nurse experts' judgment/expertise. A cross-sectional quantitative descriptive design with qualitative, narrative-type components was used for this study. Following validation rating of appropriateness of interventions and quantitative rankings of first-, second-, and third-line approaches, participants provided substantive handwritten narrative comments about listed interventions. Comments were organized and prioritized using frequency count. Narrative comments reflected the quantitative rankings of efficacy of approaches. Clinicians offered further specific suggestions regarding product use and progression of care for selected complications. Narrative analysis using descriptive quantitative frequency count supported the rankings of most preferred treatments of selected stomal and peristomal complications. Findings add to the previous research on prioritized approaches and evidence-based practice in ostomy care.

System design package for IBM system one: solar heating and domestic hot water

NASA Technical Reports Server (NTRS)

1977-01-01

This report is a collation of documents and drawings that describe a prototype solar heating and hot water system using air as the collector fluid and a pebble bed for heat storage. The system was designed for installation into a single family dwelling. The description, performance specification, subsystem drawings, verification plan/procedure, and hazard analysis of the system was packaged for evaluation of the system with information sufficient to assemble a similar system.

Users manual for the IMA program. Appendix C: Profile design program listing

NASA Technical Reports Server (NTRS)

1991-01-01

The source code for the Profile Design Program (PDP) for the Impulsive Mission Analysis (IMA) program is divided into several files. In a similar manner, the FORTRAN listings of the PDP's subroutines and function routines are organized into several groups in this appendix. Within each group, the FORTRAN listings are ordered alphabetically by routine name. Names and brief descriptions of each routine are listed in the same order as the Fortran listings.

System Design Package for SIMS Prototype System 3, Solar Heating and Domestic Hot Water

NASA Technical Reports Server (NTRS)

1978-01-01

A collation of documents and drawings are presented that describe a prototype solar heating and hot water system using liquid flat plate collectors and a gas or electric furnace energy subsystem. The system was designed for installation into a single-family dwelling. The description, performance specification, subsystem drawings, verification plan/procedure, and hazard analysis of the system are packaged for evaluation of the system with information sufficient to assemble a similar system.

Definition of the 2005 flight deck environment

NASA Technical Reports Server (NTRS)

Alter, K. W.; Regal, D. M.

1992-01-01

A detailed description of the functional requirements necessary to complete any normal commercial flight or to handle any plausible abnormal situation is provided. This analysis is enhanced with an examination of possible future developments and constraints in the areas of air traffic organization and flight deck technologies (including new devices and procedures) which may influence the design of 2005 flight decks. This study includes a discussion on the importance of a systematic approach to identifying and solving flight deck information management issues, and a description of how the present work can be utilized as part of this approach. While the intent of this study was to investigate issues surrounding information management in 2005-era supersonic commercial transports, this document may be applicable to any research endeavor related to future flight deck system design in either supersonic or subsonic airplane development.

Establishing equivalence: methodological progress in group-matching design and analysis.

PubMed

Kover, Sara T; Atwoo, Amy K

2013-01-01

This methodological review draws attention to the challenges faced by intellectual and developmental disabilities researchers in the appropriate design and analysis of group comparison studies. We provide a brief overview of matching methodologies in the field, emphasizing group-matching designs used in behavioral research on cognition and language in neurodevelopmental disorders, including autism spectrum disorder, Fragile X syndrome, Down syndrome, and Williams syndrome. The limitations of relying on p values to establish group equivalence are discussed in the context of other existing methods: equivalence tests, propensity scores, and regression-based analyses. Our primary recommendation for advancing research on intellectual and developmental disabilities is the use of descriptive indices of adequate group matching: effect sizes (i.e., standardized mean differences) and variance ratios.

Establishing Equivalence: Methodological Progress in Group-Matching Design and Analysis

PubMed Central

Kover, Sara T.; Atwood, Amy K.

2017-01-01

This methodological review draws attention to the challenges faced by intellectual and developmental disabilities researchers in the appropriate design and analysis of group comparison studies. We provide a brief overview of matching methodologies in the field, emphasizing group-matching designs utilized in behavioral research on cognition and language in neurodevelopmental disorders, including autism spectrum disorder, fragile X syndrome, Down syndrome, and Williams syndrome. The limitations of relying on p-values to establish group equivalence are discussed in the context of other existing methods: equivalence tests, propensity scores, and regression-based analyses. Our primary recommendation for advancing research on intellectual and developmental disabilities is the use of descriptive indices of adequate group matching: effect sizes (i.e., standardized mean differences) and variance ratios. PMID:23301899

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides a detailed description of the DSPAmore » Computer Program system and its subprograms. This manual will assist the programmer in revising or updating the several subprograms.« less

Spacecraft design project: High temperature superconducting infrared imaging satellite

NASA Technical Reports Server (NTRS)

1991-01-01

The High Temperature Superconductor Infrared Imaging Satellite (HTSCIRIS) is designed to perform the space based infrared imaging and surveillance mission. The design of the satellite follows the black box approach. The payload is a stand alone unit, with the spacecraft bus designed to meet the requirements of the payload as listed in the statement of work. Specifications influencing the design of the spacecraft bus were originated by the Naval Research Lab. A description of the following systems is included: spacecraft configuration, orbital dynamics, radio frequency communication subsystem, electrical power system, propulsion, attitude control system, thermal control, and structural design. The issues of testing and cost analysis are also addressed. This design project was part of the course Advanced Spacecraft Design taught at the Naval Postgraduate School.

School-based peer-related social competence interventions for children with autism spectrum disorder: a meta-analysis and descriptive review of single case research design studies.

PubMed

Whalon, Kelly J; Conroy, Maureen A; Martinez, Jose R; Werch, Brittany L

2015-06-01

The purpose of this review was to critically examine and summarize the impact of school-based interventions designed to facilitate the peer-related social competence of children with autism spectrum disorder (ASD). Reviewed studies employed a single-case experimental design, targeted peer-related social competence, included children 3-12 years old with an ASD, and took place in school settings. Articles were analyzed descriptively and using the evaluative method to determine study quality. Additionally, effect size estimates were calculated using nonoverlap of all pairs method and Tau-U. A total of 37 studies including 105 children were reviewed. Overall, ES estimates ranged from weak to strong, but on average, the reviewed interventions produced a moderate to strong effect, and quality ratings were generally in the acceptable to high range. Findings suggest that children with ASD can benefit from social skill interventions implemented with peers in school settings.

Precision Attitude Determination System (PADS) system design and analysis: Single-axis gimbal star tracker

NASA Technical Reports Server (NTRS)

1974-01-01

The feasibility is evaluated of an evolutionary development for use of a single-axis gimbal star tracker from prior two-axis gimbal star tracker based system applications. Detailed evaluation of the star tracker gimbal encoder is considered. A brief system description is given including the aspects of tracker evolution and encoder evaluation. System analysis includes evaluation of star availability and mounting constraints for the geosynchronous orbit application, and a covariance simulation analysis to evaluate performance potential. Star availability and covariance analysis digital computer programs are included.

Designers Workbench: Towards Real-Time Immersive Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuester, F; Duchaineau, M A; Hamann, B

2001-10-03

This paper introduces the DesignersWorkbench, a semi-immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates from a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The DesignersWorkbench aims at closing this technologymore » or ''digital gap'' experienced by design and CAD engineers by transforming the classical design paradigm into its filly integrated digital and virtual analog allowing collaborative development in a semi-immersive virtual environment. This project emphasizes two key components from the classical product design cycle: freeform modeling and analysis. In the freeform modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.« less

A meta-analysis of research on science teacher education practices associated with inquiry strategy

NASA Astrophysics Data System (ADS)

Sweitzer, Gary L.; Anderson, Ronald D.

A meta-analysis was conducted of studies of teacher education having as measured outcomes one or more variables associated with inquiry teaching. Inquiry addresses those teacher behaviors that facilitate student acquisition of concepts and processes through strategies such as problem solving, uses of evidence, logical and analytical reasoning, clarification of values, and decision making. Studies which contained sufficient data for the calculation of an effect size were coded for 114 variables. These variables were divided into the following six major categories: study information and design characteristics, teacher and teacher trainee characteristics, student characteristics, treatment description, outcome description, and effect size calculation. A total of 68 studies resulting in 177 effect size calculations were coded. Mean effect sizes broken across selected variables were calculated.

Developing Kindergarten Children's Mathematical Abilities and Character by Using Area Instruction Model

ERIC Educational Resources Information Center

Mardiana, Dinny; Mudrikah, Achmad; Amna, Nurjanah

2016-01-01

This study aimed to describe the application of Area Instruction Model on one of the state kindergarten in Bandung city. The study used a qualitative approach with descriptive qualitative design. Data was obtained through interviews, observation, and documentation. The validity of the analysis was guaranteed through perseverance observation and…

The Information Bazaar; Sixth Annual National Colloquium on Information Retrieval, May 8-9, 1969, Philadelphia, Pennsylvania.

ERIC Educational Resources Information Center

Schultz, Louise, Ed.

The 31 papers in this proceedings cover social as well as technical issues, mathematical models and formal logic systems, applications descriptions, program design, cost analysis, and predictions. The papers are grouped into sessions including: privacy and information technology, describing documents, information dissemination systems, public and…

Inorganic Analysis in Water Quality Control Programs. Instructor's Guide.

ERIC Educational Resources Information Center

Kroner, Audrey

This two-part instructor's guide was designed for a five-day course for chemists and technicians with little or no experience in inorganic analyses. Part I provides information on course planning and management including course description, staff responsibilities, suggested course plan and agenda, timeline for planning and conducting the course,…

Women of the World: Sub-Saharan Africa.

ERIC Educational Resources Information Center

Newman, Jeanne S.

The second in a series of five handbooks designed to present and analyze statistical data on women in various regions of the world, this handbook focuses on women in 40 countries of Sub-Saharan Africa. Beginning with an overview of population characteristics in the region, the analysis continues with a description of women's literacy and…

A COMPREHENSIVE NONPOINT SOURCE FIELD STUDY FOR SEDIMENT, NUTRIENTS, AND PATHOGENS IN THE SOUTH FORK BROAD RIVER WATERSHED IN NORTHEAST GEORGIA

EPA Science Inventory

This technical report provides a description of the field project design, quality control, the sampling protocols and analysis methodology used, and standard operating procedures for the South Fork Broad River Watershed (SFBR) Total Maximum Daily Load (TMDL) project. This watersh...

An Analysis of the Relationship Between Organizational Climate and the Performance of Counselor Functions.

ERIC Educational Resources Information Center

Cottingham, Harold F.; And Others

The study was designed to determine if a significant relationship existed between the organizational climate of the high school and the functions counselors performed in nine selected high schools in Pinellas County, Florida. Two instruments were used: (1) The Organizational Climate Description Questionnaire (OCDQ) dealing with eight…

Invitation Refusals in Cameroon French and Hexagonal French

ERIC Educational Resources Information Center

Farenkia, Bernard Mulo

2015-01-01

Descriptions of regional pragmatic variation in French are lacking to date the focus has been on a limited range of speech acts, including apologies, requests, compliments and responses to compliments. The present paper, a systematic analysis of invitation refusals across regional varieties of French, is designed to add to the research on…

Statistical description of tectonic motions

NASA Technical Reports Server (NTRS)

Agnew, Duncan Carr

1993-01-01

This report summarizes investigations regarding tectonic motions. The topics discussed include statistics of crustal deformation, Earth rotation studies, using multitaper spectrum analysis techniques applied to both space-geodetic data and conventional astrometric estimates of the Earth's polar motion, and the development, design, and installation of high-stability geodetic monuments for use with the global positioning system.

Secondary School Teachers' Experiences of Teaching Pregnant Learners in Limpopo Province, South Africa

ERIC Educational Resources Information Center

Matlala, Sogo F.; Nolte, A. G. W.; Temane, M. A.

2014-01-01

This paper presents the findings of a study on the experiences of secondary school teachers on teaching pregnant learners in Limpopo Province. A qualitative, exploratory, descriptive and contextual design was used. Semi-structured interviews were conducted with ten purposively selected secondary school teachers. Data analysis yielded six themes,…

Testing Moderator and Mediator Effects in Counseling Psychology Research

ERIC Educational Resources Information Center

Frazier, Patricia A.; Tix, Andrew P.; Barron, Kenneth E.

2004-01-01

The goals of this article are to (a) describe differences between moderator and mediator effects; (b) provide nontechnical descriptions of how to examine each type of effect, including study design, analysis, and interpretation of results; (c) demonstrate how to analyze each type of effect; and (d) provide suggestions for further reading. The…

Interviewing Youthful Suspects in Alleged Sex Crimes: A Descriptive Analysis

ERIC Educational Resources Information Center

Hershkowitz, Irit; Horowitz, Dvora; Lamb, Michael E.; Orbach, Yael; Sternberg, Kathleen J.

2004-01-01

Objective: To introduce and evaluate a structured interview protocol designed for investigative interviews of youthful alleged perpetrators of child sexual abuse. Method: Seventy-two alleged perpetrators ranging from 9 to 14 years of age (M=12 years) were interviewed by 1 of 13 experienced youth investigators, employed by the Israeli Ministry of…

Personnel Serving the Severely/Profoundly Handicapped: Professional Preparation and Priorities.

ERIC Educational Resources Information Center

Gisler, Jan; And Others

A survey was designed to collect descriptive information from teachers of severely/profoundly handicapped (S/PH) students in the public schools of Nevada and Utah. Analysis of 59 responses provided information on teacher demographics (including that the majority of teachers were female, held a special education credential and were relatively…

Plutonium Immobilization Project System Design Description for Can Loading System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriikku, E.

2001-02-15

The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

NASA Technical Reports Server (NTRS)

Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

1981-01-01

The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.

Usage and Design Evaluation by Family Caregivers of aStroke Intervention Website

PubMed Central

Pierce, Linda L.; Steiner, Victoria

2013-01-01

Background Four out of 5 families are affected by stroke. Many caregivers access the Internet and gather healthcare information from web-based sources. Design The purpose of this descriptive evaluation was to assess the usage and design of the Caring~Web© site, which provides education/support for family caregivers of persons with stroke residing in home settings. Sample and Setting Thirty-six caregivers from two Midwest states accessed this intervention in a 1-year study. The average participant was fifty-four years of age, white, female, and the spouse of the care recipient. Methods In a telephone interview, four website questions were asked twice-/bi-monthly and a 33-item Survey at the conclusion of the study evaluated the website usage and design of its components. Descriptive analysis methods were used and statistics were collected on the number of visits to the website. Results On average, participants logged on to the website one to two hours per week, although usage declined after several months for some participants. Participants positively rated the website’s appearance and usability that included finding the training to be adequate. Conclusion Website designers can replicate this intervention for other health conditions. PMID:24025464

Impact of design features upon perceived tool usability and safety

NASA Astrophysics Data System (ADS)

Wiker, Steven F.; Seol, Mun-Su

2005-11-01

While injuries from powered hand tools are caused by a number of factors, this study looks specifically at the impact of the tools design features on perceived tool usability and safety. The tools used in this study are circular saws, power drills and power nailers. Sixty-nine males and thirty-two females completed an anonymous web-based questionnaire that provided orthogonal view photographs of the various tools. Subjects or raters provided: 1) description of the respondents or raters, 2) description of the responses from the raters, and 3) analysis of the interrelationships among respondent ratings of tool safety and usability, physical metrics of the tool, and rater demographic information. The results of the study found that safety and usability were dependent materially upon rater history of use and experience, but not upon training in safety and usability, or quality of design features of the tools (e.g., grip diameters, trigger design, guards, etc.). Thus, positive and negative transfer of prior experience with use of powered hand tools is far more important than any expectancy that may be driven by prior safety and usability training, or from the visual cues that are provided by the engineering design of the tool.

Shape Optimization by Bayesian-Validated Computer-Simulation Surrogates

NASA Technical Reports Server (NTRS)

Patera, Anthony T.

1997-01-01

A nonparametric-validated, surrogate approach to optimization has been applied to the computational optimization of eddy-promoter heat exchangers and to the experimental optimization of a multielement airfoil. In addition to the baseline surrogate framework, a surrogate-Pareto framework has been applied to the two-criteria, eddy-promoter design problem. The Pareto analysis improves the predictability of the surrogate results, preserves generality, and provides a means to rapidly determine design trade-offs. Significant contributions have been made in the geometric description used for the eddy-promoter inclusions as well as to the surrogate framework itself. A level-set based, geometric description has been developed to define the shape of the eddy-promoter inclusions. The level-set technique allows for topology changes (from single-body,eddy-promoter configurations to two-body configurations) without requiring any additional logic. The continuity of the output responses for input variations that cross the boundary between topologies has been demonstrated. Input-output continuity is required for the straightforward application of surrogate techniques in which simplified, interpolative models are fitted through a construction set of data. The surrogate framework developed previously has been extended in a number of ways. First, the formulation for a general, two-output, two-performance metric problem is presented. Surrogates are constructed and validated for the outputs. The performance metrics can be functions of both outputs, as well as explicitly of the inputs, and serve to characterize the design preferences. By segregating the outputs and the performance metrics, an additional level of flexibility is provided to the designer. The validated outputs can be used in future design studies and the error estimates provided by the output validation step still apply, and require no additional appeals to the expensive analysis. Second, a candidate-based a posteriori error analysis capability has been developed which provides probabilistic error estimates on the true performance for a design randomly selected near the surrogate-predicted optimal design.

Using cognitive work analysis to explore activity allocation within military domains.

PubMed

Jenkins, D P; Stanton, N A; Salmon, P M; Walker, G H; Young, M S

2008-06-01

Cognitive work analysis (CWA) is frequently advocated as an approach for the analysis of complex socio-technical systems. Much of the current CWA literature within the military domain pays particular attention to its initial phases; work domain analysis and contextual task analysis. Comparably, the analysis of the social and organisational constraints receives much less attention. Through the study of a helicopter mission planning system software tool, this paper describes an approach for investigating the constraints affecting the distribution of work. The paper uses this model to evaluate the potential benefits of the social and organisational analysis phase within a military context. The analysis shows that, through its focus on constraints, the approach provides a unique description of the factors influencing the social organisation within a complex domain. This approach appears to be compatible with existing approaches and serves as a validation of more established social analysis techniques. As part of the ergonomic design of mission planning systems, the social organisation and cooperation analysis phase of CWA provides a constraint-based description informing allocation of function between key actor groups. This approach is useful because it poses questions related to the transfer of information and optimum working practices.

Quantitative Pedagogy: A Digital Two Player Game to Examine Communicative Competence.

PubMed

Lopez-Rosenfeld, Matías; Carrillo, Facundo; Garbulsky, Gerry; Fernandez Slezak, Diego; Sigman, Mariano

2015-01-01

Inner concepts are much richer than the words that describe them. Our general objective is to inquire what are the best procedures to communicate conceptual knowledge. We construct a simplified and controlled setup emulating important variables of pedagogy amenable to quantitative analysis. To this aim, we designed a game inspired in Chinese Whispers, to investigate which attributes of a description affect its capacity to faithfully convey an image. This is a two player game: an emitter and a receiver. The emitter was shown a simple geometric figure and was asked to describe it in words. He was informed that this description would be passed to the receiver who had to replicate the drawing from this description. We capitalized on vast data obtained from an android app to quantify the effect of different aspects of a description on communication precision. We show that descriptions more effectively communicate an image when they are coherent and when they are procedural. Instead, the creativity, the use of metaphors and the use of mathematical concepts do not affect its fidelity.

Quantitative Pedagogy: A Digital Two Player Game to Examine Communicative Competence

PubMed Central

Lopez-Rosenfeld, Matías; Carrillo, Facundo; Garbulsky, Gerry; Fernandez Slezak, Diego; Sigman, Mariano

2015-01-01

Inner concepts are much richer than the words that describe them. Our general objective is to inquire what are the best procedures to communicate conceptual knowledge. We construct a simplified and controlled setup emulating important variables of pedagogy amenable to quantitative analysis. To this aim, we designed a game inspired in Chinese Whispers, to investigate which attributes of a description affect its capacity to faithfully convey an image. This is a two player game: an emitter and a receiver. The emitter was shown a simple geometric figure and was asked to describe it in words. He was informed that this description would be passed to the receiver who had to replicate the drawing from this description. We capitalized on vast data obtained from an android app to quantify the effect of different aspects of a description on communication precision. We show that descriptions more effectively communicate an image when they are coherent and when they are procedural. Instead, the creativity, the use of metaphors and the use of mathematical concepts do not affect its fidelity. PMID:26554833

Bivariate frequency analysis of rainfall intensity and duration for urban stormwater infrastructure design

NASA Astrophysics Data System (ADS)

Jun, Changhyun; Qin, Xiaosheng; Gan, Thian Yew; Tung, Yeou-Koung; De Michele, Carlo

2017-10-01

This study presents a storm-event based bivariate frequency analysis approach to determine design rainfalls in which, the number, intensity and duration of actual rainstorm events were considered. To derive more realistic design storms, the occurrence probability of an individual rainstorm event was determined from the joint distribution of storm intensity and duration through a copula model. Hourly rainfall data were used at three climate stations respectively located in Singapore, South Korea and Canada. It was found that the proposed approach could give a more realistic description of rainfall characteristics of rainstorm events and design rainfalls. As results, the design rainfall quantities from actual rainstorm events at the three studied sites are consistently lower than those obtained from the conventional rainfall depth-duration-frequency (DDF) method, especially for short-duration storms (such as 1-h). It results from occurrence probabilities of each rainstorm event and a different angle for rainfall frequency analysis, and could offer an alternative way of describing extreme rainfall properties and potentially help improve the hydrologic design of stormwater management facilities in urban areas.

Information transfer satellite concept study. Volume 4: computer manual

NASA Technical Reports Server (NTRS)

Bergin, P.; Kincade, C.; Kurpiewski, D.; Leinhaupel, F.; Millican, F.; Onstad, R.

1971-01-01

The Satellite Telecommunications Analysis and Modeling Program (STAMP) provides the user with a flexible and comprehensive tool for the analysis of ITS system requirements. While obtaining minimum cost design points, the program enables the user to perform studies over a wide range of user requirements and parametric demands. The program utilizes a total system approach wherein the ground uplink and downlink, the spacecraft, and the launch vehicle are simultaneously synthesized. A steepest descent algorithm is employed to determine the minimum total system cost design subject to the fixed user requirements and imposed constraints. In the process of converging to the solution, the pertinent subsystem tradeoffs are resolved. This report documents STAMP through a technical analysis and a description of the principal techniques employed in the program.

Mechatronic system design course for undergraduate programmes

NASA Astrophysics Data System (ADS)

Saleem, A.; Tutunji, T.; Al-Sharif, L.

2011-08-01

Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching mechatronic system design to undergraduate engineering students is emphasised. The paper offers the collaborative experience in preparing and delivering the course material for two universities in Jordan. A detailed description of such a course is provided and a case study is presented. The case study used is a final year project, where students applied a six-stage design procedure that is described in the paper.

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 1: Executive summary. Phase A: Conceptual design and programmatics

NASA Technical Reports Server (NTRS)

1985-01-01

The study was conducted in 3 parts over a 3 year period. The study schedule and the documentation associated with each study part is given. This document summarized selected study results from the conceptual design and programmatics segment of the effort. The objectives were: (1) to update requirements and tradeoffs and develop a detailed design and mission requirements document; (2) to develop conceptual designs and mission descriptions; and (3) to develop programmatic, i.e., work breakdown structure and work breakdown structure dictionary, estimated cost, and implementing plans and schedules.

Modeling workflow to design machine translation applications for public health practice

PubMed Central

Turner, Anne M.; Brownstein, Megumu K.; Cole, Kate; Karasz, Hilary; Kirchhoff, Katrin

2014-01-01

Objective Provide a detailed understanding of the information workflow processes related to translating health promotion materials for limited English proficiency individuals in order to inform the design of context-driven machine translation (MT) tools for public health (PH). Materials and Methods We applied a cognitive work analysis framework to investigate the translation information workflow processes of two large health departments in Washington State. Researchers conducted interviews, performed a task analysis, and validated results with PH professionals to model translation workflow and identify functional requirements for a translation system for PH. Results The study resulted in a detailed description of work related to translation of PH materials, an information workflow diagram, and a description of attitudes towards MT technology. We identified a number of themes that hold design implications for incorporating MT in PH translation practice. A PH translation tool prototype was designed based on these findings. Discussion This study underscores the importance of understanding the work context and information workflow for which systems will be designed. Based on themes and translation information workflow processes, we identified key design guidelines for incorporating MT into PH translation work. Primary amongst these is that MT should be followed by human review for translations to be of high quality and for the technology to be adopted into practice. Counclusion The time and costs of creating multilingual health promotion materials are barriers to translation. PH personnel were interested in MT's potential to improve access to low-cost translated PH materials, but expressed concerns about ensuring quality. We outline design considerations and a potential machine translation tool to best fit MT systems into PH practice. PMID:25445922

Users manual and modeling improvements for axial turbine design and performance computer code TD2-2

NASA Technical Reports Server (NTRS)

Glassman, Arthur J.

1992-01-01

Computer code TD2 computes design point velocity diagrams and performance for multistage, multishaft, cooled or uncooled, axial flow turbines. This streamline analysis code was recently modified to upgrade modeling related to turbine cooling and to the internal loss correlation. These modifications are presented in this report along with descriptions of the code's expanded input and output. This report serves as the users manual for the upgraded code, which is named TD2-2.

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Age-related differences in communication and audience design.

PubMed

Horton, William S; Spieler, Daniel H

2007-06-01

This article reports an experiment examining the extent to which younger and older speakers engage in audience design, the process of adapting one's speech for particular addresses. Through an initial card-matching task, pairs of younger adults and pairs of older adults established common ground for sets of picture cards. Subsequently, the same individuals worked separately on a computer-based picture-description task that involved a novel partner-cuing paradigm. Younger speakers' descriptions to the familiar partner were shorter and were initiated more quickly than were descriptions to an unfamiliar partner. In addition, younger speakers' descriptions to the familiar partner exhibited a higher proportion of lexical overlap with previous descriptions than did descriptions to an unfamiliar partner. Older speakers showed no equivalent evidence for audience design, which may reflect difficulties with retrieving partner-specific information from memory during conversation. ((c) 2007 APA, all rights reserved).

Measuring the impact of medicines regulatory interventions – Systematic review and methodological considerations

PubMed Central

Morales, Daniel R.; Pacurariu, Alexandra; Kurz, Xavier

2017-01-01

Aims Evaluating the public health impact of regulatory interventions is important but there is currently no common methodological approach to guide this evaluation. This systematic review provides a descriptive overview of the analytical methods for impact research. Methods We searched MEDLINE and EMBASE for articles with an empirical analysis evaluating the impact of European Union or non‐European Union regulatory actions to safeguard public health published until March 2017. References from systematic reviews and articles from other known sources were added. Regulatory interventions, data sources, outcomes of interest, methodology and key findings were extracted. Results From 1246 screened articles, 229 were eligible for full‐text review and 153 articles in English language were included in the descriptive analysis. Over a third of articles studied analgesics and antidepressants. Interventions most frequently evaluated are regulatory safety communications (28.8%), black box warnings (23.5%) and direct healthcare professional communications (10.5%); 55% of studies measured changes in drug utilization patterns, 27% evaluated health outcomes, and 18% targeted knowledge, behaviour or changes in clinical practice. Unintended consequences like switching therapies or spill‐over effects were rarely evaluated. Two‐thirds used before–after time series and 15.7% before–after cross‐sectional study designs. Various analytical approaches were applied including interrupted time series regression (31.4%), simple descriptive analysis (28.8%) and descriptive analysis with significance tests (23.5%). Conclusion Whilst impact evaluation of pharmacovigilance and product‐specific regulatory interventions is increasing, the marked heterogeneity in study conduct and reporting highlights the need for scientific guidance to ensure robust methodologies are applied and systematic dissemination of results occurs. PMID:29105853

Analysis of laparoscopic port site complications: A descriptive study

PubMed Central

Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

2013-01-01

CONTEXT: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. AIMS: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. SETTINGS AND DESIGN: Prospective descriptive study. MATERIALS AND METHODS: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. STATISTICAL ANALYSIS USED: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. RESULTS: Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). CONCLUSIONS: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit. PMID:23741110

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Work Domain Analysis of a Predecessor Sodium-cooled Reactor as Baseline for AdvSMR Operational Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald Farris; David Gertman; Jacques Hugo

This report presents the results of the Work Domain Analysis for the Experimental Breeder Reactor (EBR-II). This is part of the phase of the research designed to incorporate Cognitive Work Analysis in the development of a framework for the formalization of an Operational Concept (OpsCon) for Advanced Small Modular Reactors (AdvSMRs). For a new AdvSMR design, information obtained through Cognitive Work Analysis, combined with human performance criteria, can and should be used in during the operational phase of a plant to assess the crew performance aspects associated with identified AdvSMR operational concepts. The main objective of this phase was tomore » develop an analytical and descriptive framework that will help systems and human factors engineers to understand the design and operational requirements of the emerging generation of small, advanced, multi-modular reactors. Using EBR-II as a predecessor to emerging sodium-cooled reactor designs required the application of a method suitable to the structured and systematic analysis of the plant to assist in identifying key features of the work associated with it and to clarify the operational and other constraints. The analysis included the identification and description of operating scenarios that were considered characteristic of this type of nuclear power plant. This is an invaluable aspect of Operational Concept development since it typically reveals aspects of future plant configurations that will have an impact on operations. These include, for example, the effect of core design, different coolants, reactor-to-power conversion unit ratios, modular plant layout, modular versus central control rooms, plant siting, and many more. Multi-modular plants in particular are expected to have a significant impact on overall OpsCon in general, and human performance in particular. To support unconventional modes of operation, the modern control room of a multi-module plant would typically require advanced HSIs that would provide sophisticated operational information visualization, coupled with adaptive automation schemes and operator support systems to reduce complexity. These all have to be mapped at some point to human performance requirements. The EBR-II results will be used as a baseline that will be extrapolated in the extended Cognitive Work Analysis phase to the analysis of a selected advanced sodium-cooled SMR design as a way to establish non-conventional operational concepts. The Work Domain Analysis results achieved during this phase have not only established an organizing and analytical framework for describing existing sociotechnical systems, but have also indicated that the method is particularly suited to the analysis of prospective and immature designs. The results of the EBR-II Work Domain Analysis have indicated that the methodology is scientifically sound and generalizable to any operating environment.« less

Minimal Information for Neural Electromagnetic Ontologies (MINEMO): A standards-compliant method for analysis and integration of event-related potentials (ERP) data

PubMed Central

Frishkoff, Gwen; Sydes, Jason; Mueller, Kurt; Frank, Robert; Curran, Tim; Connolly, John; Kilborn, Kerry; Molfese, Dennis; Perfetti, Charles; Malony, Allen

2011-01-01

We present MINEMO (Minimal Information for Neural ElectroMagnetic Ontologies), a checklist for the description of event-related potentials (ERP) studies. MINEMO extends MINI (Minimal Information for Neuroscience Investigations)to the ERP domain. Checklist terms are explicated in NEMO, a formal ontology that is designed to support ERP data sharing and integration. MINEMO is also linked to an ERP database and web application (the NEMO portal). Users upload their data and enter MINEMO information through the portal. The database then stores these entries in RDF (Resource Description Framework), along with summary metrics, i.e., spatial and temporal metadata. Together these spatial, temporal, and functional metadata provide a complete description of ERP data and the context in which these data were acquired. The RDF files then serve as inputs to ontology-based labeling and meta-analysis. Our ultimate goal is to represent ERPs using a rich semantic structure, so results can be queried at multiple levels, to stimulate novel hypotheses and to promote a high-level, integrative account of ERP results across diverse study methods and paradigms. PMID:22180824

Modeling, simulation and optimization of a no-chamber solid oxide fuel cell operated with a flat-flame burner

NASA Astrophysics Data System (ADS)

Vogler, Marcel; Horiuchi, Michio; Bessler, Wolfgang G.

A detailed computational model of a direct-flame solid oxide fuel cell (DFFC) is presented. The DFFC is based on a fuel-rich methane-air flame stabilized on a flat-flame burner and coupled to a solid oxide fuel cell (SOFC). The model consists of an elementary kinetic description of the premixed methane-air flame, a stagnation-point flow description of the coupled heat and mass transport within the gas phase, an elementary kinetic description of the electrochemistry, as well as heat, mass and charge transport within the SOFC. Simulated current-voltage characteristics show excellent agreement with experimental data published earlier (Kronemayer et al., 2007 [10]). The model-based analysis of loss processes reveals that ohmic resistance in the current collection wires dominates polarization losses, while electronic loss currents in the mixed conducting electrolyte have only little influence on the polarized cell. The model was used to propose an optimized cell design. Based on this analysis, power densities of above 200 mW cm -2 can be expected.

Scaled accelerographs for design of structures in Quetta, Baluchistan, Pakistan

NASA Astrophysics Data System (ADS)

Bhatti, Abdul Qadir

2016-12-01

Structural design for seismic excitation is usually based on peak values of forces and deformations over the duration of earthquake. In determining these peak values dynamic analysis is done which requires either response history analysis (RHA), also called time history analysis, or response spectrum analysis (RSA), both of which depend upon ground motion severity. In the past, PGA has been used to describe ground motion severity, because seismic force on a rigid body is proportional to the ground acceleration. However, it has been pointed out that single highest peak on accelerograms is a very unreliable description of the accelerograms as a whole. In this study, we are considering 0.2- and 1-s spectral acceleration. Seismic loading has been defined in terms of design spectrum and time history which will lead us to two methods of dynamic analysis. Design spectrum for Quetta will be constructed incorporating the parameters of ASCE 7-05/IBC 2006/2009, which is being used by modern codes and regulation of the world like IBC 2006/2009, ASCE 7-05, ATC-40, FEMA-356 and others. A suite of time history representing design earthquake will also be prepared, this will be a helpful tool to carryout time history dynamic analysis of structures in Quetta.

Processor architectures utilizing magnetic bubble and semi-conductor memories. [for the Omega navigation system

NASA Technical Reports Server (NTRS)

Parrish, E. A., Jr.; Aylor, J. H.

1975-01-01

To aid work being conducted on the feasibility of a low cost Omega navigational receiver, a control panel was designed and constructed according to supplied specifications. Since the proposed Omega receiver is designed around a microprocessor, software engineering necessary for control panel operation is included in the design. The control panel is to be used as an operational model for use in the design of a prototype receiver. A detailed description of the hardware design is presented along with a description of the software needed to operate the panel. A complete description of the operating procedures for the panel are also included.

Beam director design report: Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younger, F.C.

1986-08-01

A design and fabrication effort for a beam director is documented. The conceptual design provides for the beam to pass first through a bending and focusing system (or ''achromat''), through a second achromat, through an air-to-vacuum interface (the ''beam window''), and finally through the vernier steering system. Following an initial concept study for a beam director, a prototype permanent magnet 30/sup 0/ beam-bending achromat and a prototype vernier steering magnet were designed and built. In volume I, the design requirements are stated, the design is summarized and illustrated, and detailed analysis and computations are provided. Also, a summary of materialsmore » used, a description of the manufacturing process, and a summary of project funding are provided. (LEW)« less

A zonal computational procedure adapted to the optimization of two-dimensional thrust augmentor inlets

NASA Technical Reports Server (NTRS)

Lund, T. S.; Tavella, D. A.; Roberts, L.

1985-01-01

A viscous-inviscid interaction methodology based on a zonal description of the flowfield is developed as a mean of predicting the performance of two-dimensional thrust augmenting ejectors. An inviscid zone comprising the irrotational flow about the device is patched together with a viscous zone containing the turbulent mixing flow. The inviscid region is computed by a higher order panel method, while an integral method is used for the description of the viscous part. A non-linear, constrained optimization study is undertaken for the design of the inlet region. In this study, the viscous-inviscid analysis is complemented with a boundary layer calculation to account for flow separation from the walls of the inlet region. The thrust-based Reynolds number as well as the free stream velocity are shown to be important parameters in the design of a thrust augmentor inlet.

Quantitative analysis to guide orphan drug development.

PubMed

Lesko, L J

2012-08-01

The development of orphan drugs for rare diseases has made impressive strides in the past 10 years. There has been a surge in orphan drug designations, but new drug approvals have not kept up. This article presents a three-pronged hierarchical strategy for quantitative analysis of data at the descriptive, mechanistic, and systems levels of the biological system that could represent a standardized and rational approach to orphan drug development. Examples are provided to illustrate the concept.

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... necessary descriptive data for inclusion in the type design the other configurations of the same engine type... for approval of a major change in type design must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design; (2) Show that the changed product complies with the...

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... (a) An applicant for approval of a major change in type design must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design; (2) Show that the changed product... the necessary descriptive data for inclusion in the type design the other configurations of the same...

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must submit substantiating data and necessary descriptive data for inclusion in the type design. (b... major change in type design must— (1) Provide substantiating data and necessary descriptive data for... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Approval of major changes in type design...

Digital systems design language. Design synthesis of digital systems

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1979-01-01

The Digital Systems Design Language (DDL) is implemented on the SEL-32 computer systems. The details of the language, translator and simulator programs are included. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

Service Use and Satisfaction Following Acquired Brain Injury: A Preliminary Analysis of Family Caregiver Outcomes

ERIC Educational Resources Information Center

Degeneffe, Charles Edmund; Green, Richard; Jones, Clair

2016-01-01

Purpose: The study aimed to understand how use and satisfaction with services following discharge from an acquired brain injury (ABI) acute-care facility related to family caregiver outcomes. Methods: A correlational and descriptive study design was used. Nineteen primary family caregivers of persons recently discharged from an ABI acute-care…

The Practical Relevance of Accountability Systems for School Improvement: A Descriptive Analysis of California Schools. CSE Report 713

ERIC Educational Resources Information Center

Mintrop, Heinrich; Trujillo, Tina

2007-01-01

In search for the practical relevance of accountability systems for school improvement, we ask whether practitioners traveling between the worlds of system-designated high and low-performing schools would detect tangible differences by observing concrete behaviors, looking at student work, or inquiring about teacher, administrator, or student…

Women of the World: Asia and the Pacific.

ERIC Educational Resources Information Center

Shah, Nasra M.

The fourth in a series of five handbooks designed to present and analyze statistical data on women in various regions of the world, this handbook focuses on women in 14 countries of Asia and the Pacific. Beginning with an overview of population distribution and changes in the region, the analysis continues with a description of women's literacy…

Women of the World: Latin America and the Caribbean.

ERIC Educational Resources Information Center

Chaney, Elsa M.

The first in a series of five handbooks designed to present and analyze statistical data on women in various regions of the world, this handbook focuses on women in 21 countries in Latin America and the Caribbean. Beginning with an overview of population characteristics of the regions, the analysis continues with a description of women's literacy…

A Descriptive Analysis of Publication Trends in the "Journal of Behavioral Education": 1991-2005

ERIC Educational Resources Information Center

Lee, David L.; Hamlin, Dawn W.; Hildebrand, Katie E.; Carranza, Mandy K.; Wannarka, Rachel; Hua, Youjia

2007-01-01

Sometimes it is important to look back so that one can more clearly determine future directions. As such, the purpose of this paper was twofold. First, characteristics of participants, settings, interventions, interventionists, design, and measures were coded and analyzed to ascertain the nature of publication trends in the "Journal of Behavioral…

A Needs Analysis Study for Preparatory Class ELT Students

ERIC Educational Resources Information Center

Ulum, Ömer Gökhan

2015-01-01

With this study, to have a general understanding of academic needs for the development of speaking skill, the needs of preparatory class university students at an English Language Teaching Department were assessed. Based upon a descriptive research design, an adapted questionnaire with open-ended questions was administered to the 2nd, 3rd and 4th…

Digital signal processing in microwave radiometers

NASA Technical Reports Server (NTRS)

Lawrence, R. W.; Stanley, W. D.; Harrington, R. F.

1980-01-01

A microprocessor based digital signal processing unit has been proposed to replace analog sections of a microwave radiometer. A brief introduction to the radiometer system involved and a description of problems encountered in the use of digital techniques in radiometer design are discussed. An analysis of the digital signal processor as part of the radiometer is then presented.

Peer Coaching as an Institutionalised Tool for Professional Development: The Perceptions of Tutors in a Nigerian College

ERIC Educational Resources Information Center

Aderibigbe, Semiyu Adejare; Ajasa, Folorunso Adekemi

2013-01-01

Purpose: The purpose of this paper is to explore the perceptions of college tutors on peer coaching as a tool for professional development to determine its formal institutionalisation. Design/methodology/approach: A survey questionnaire was used for data collection, while analysis of data was done using descriptive statistics. Findings: The…

Hypermedia Management in Television through Text Processing

ERIC Educational Resources Information Center

Caldera-Serrano, Jorge

2008-01-01

Purpose: This paper aims to describe a working routine for the analysis of audio-visual documents for serving the needs of television journalists. Design/methodology/approach: A description in the form of a synthesis is given of the process by which television information must be put at the user's disposal with a response that is both fast and…

Risk Communication about Nuclear Power in Korea: One-Year Descriptive Analysis on Twitter

ERIC Educational Resources Information Center

Kim, Minkee

2013-01-01

Over the last three decades, public understanding of science (PUS) has been one of the foremost research topics in the Korean society where numerous social scientific conflicts have taken place. As a lead channel of risk communication, Twitter has been studied in experimental research designs or among target user groups, leaving the measurement of…

Demonstration Advanced Avionics System (DAAS). Phase 1 report

NASA Technical Reports Server (NTRS)

1981-01-01

An integrated avionics system which provides expanded functional capabilities that significantly enhance the utility and safety of general aviation at a cost commensurate with the general aviation market is discussed. Displays and control were designed so that the pilot can use the system after minimum training. Functional and hardware descriptions, operational evaluation and failure modes effects analysis are included.

A Content Analysis of the Congruence between the Evaluation Criteria of Superintendents and the Iowa Standards for School Leaders

ERIC Educational Resources Information Center

Adams, Matthew J.

2011-01-01

The Problem: This study was designed to analyze the evaluation criteria of the instruments used to evaluate superintendents, the job descriptions for those superintendents, and the goals written as part of their Individual Administrator Professional Development Plans (IAPDPs) to determine whether superintendents are being held accountable for…

Core Self-Evaluations as a Mediator between Functional Disability and Life Satisfaction in College Students with Disabilities Majoring in Science and Technology

ERIC Educational Resources Information Center

Smedema, Susan Miller; Pfaller, Joseph S.; Yaghmaian, Rana A.; Weaver, Hayley; da Silva Cardoso, Elizabeth; Chan, Fong

2015-01-01

Purpose: To examine the mediational effect of core self-evaluations (CSE) on the relationship between functional disability and life satisfaction. Methods: A quantitative descriptive design using multiple regression analysis. The participants were 97 college students with disabilities receiving services through Hunter College's Minority-Disability…

Teaching Effectiveness in Private Higher Education Institutions in Botswana: Analysis of Students' Perceptions

ERIC Educational Resources Information Center

Baliyan, Som Pal; Moorad, Fazlur Rehman

2018-01-01

This quantitative study analyzed the perceptions of students on teaching effectiveness in private higher education institutions in Botswana. An exploratory and descriptive survey research design was adopted in this study. A valid and reliable questionnaire was used to collect data through a survey of 560 stratified randomly sampled students in…

COMPARISON OF RANDOM AND SYSTEMATIC SITE SELECTION FOR ASSESSING ATTAINMENT OF AQUATIC LIFE USES IN SEGMENTS OF THE OHIO RIVER

EPA Science Inventory

This report is a description of field work and data analysis results comparing a design comparable to systematic site selection with one based on random selection of sites. The report is expected to validate the use of random site selection in the bioassessment program for the O...

Decision Making under Uncertainty: The Case of Adoption vs. Foster Care.

ERIC Educational Resources Information Center

Ambrosino, Robert J.

This report provides a detailed description of Decision Analysis, a program designed to help social services administrators make informed judgments about the impact of implementing various program alternatives which compete for funding. A familiar example, whether to place a child in long term foster care or a permanent adoptive home is used to…

Design, analysis, and test verification of advanced encapsulation systems

NASA Technical Reports Server (NTRS)

Mardesich, N.; Minning, C.

1982-01-01

Design sensitivities are established for the development of photovoltaic module criteria and the definition of needed research tasks. The program consists of three phases. In Phase I, analytical models were developed to perform optical, thermal, electrical, and structural analyses on candidate encapsulation systems. From these analyses several candidate systems will be selected for qualification testing during Phase II. Additionally, during Phase II, test specimens of various types will be constructed and tested to determine the validity of the analysis methodology developed in Phase I. In Phse III, a finalized optimum design based on knowledge gained in Phase I and II will be developed. All verification testing was completed during this period. Preliminary results and observations are discussed. Descriptions of the thermal, thermal structural, and structural deflection test setups are included.

Radiation protection design considerations for man in geosynchronous orbits

NASA Technical Reports Server (NTRS)

Rossi, M. L.; Stauber, M. C.

1977-01-01

A description is presented of preliminary studies which have been carried out to identify design requirements and mission constraints imposed by the geosynchronous radiation environment. The radiation species of dominant impact are the trapped electrons and solar flare particles. The criterion used in the conducted shielding design analysis has been to limit the skin dose to 100 rems for 3 months. The analysis included the optimization of an electron/bremsstrahlung shield for residence within the vehicle, the minimization of the dose received in extravehicular activity, and the calculation of special shield requirements for solar flares. An investigation was conducted of the potential benefits accruing from a three-layered composite shield with part of the aluminum layer replaced with a lower atomic number material. The materials considered were polyethylene, carbon, beryllium, and lithium hydride.

Intervening to promote early initiation of breastfeeding in the LDR.

PubMed

Komara, Carol; Simpson, Diana; Teasdale, Carla; Whalen, Gaye; Bell, Shay; Giovanetto, Laurie

2007-01-01

To evaluate the effectiveness of an interventional protocol for the early initiation of breastfeeding that would remove barriers in the labor, delivery, recovery (LDR) unit. Descriptive design using 100 postpartum mothers who were interviewed before discharge at a large university hospital in the south-central United States. Descriptive statistics were used for analysis. The protocol was effective for initiating breastfeeding, and breastfeeding increased from 53% to 66%. When barriers to breastfeeding are reduced in the LDR setting, women will breastfeed. It is possible that reducing hospital barriers to breastfeeding in the LDR can also set the stage for sustained breastfeeding during hospitalization and for less supplementation with formula.

Determination of relative phase permeabilities in stochastic model of pore channel distribution by diameter

NASA Astrophysics Data System (ADS)

Zemenkova, M. Y.; Shabarov, A.; Shatalov, A.; Puldas, L.

2018-05-01

The problem of the pore space description and the calculation of relative phase permeabilities (RPP) for two-phase filtration is considered. A technique for constructing a pore-network structure for constant and variable channel diameters is proposed. A description of the design model of RPP based on the capillary pressure curves is presented taking into account the variability of diameters along the length of pore channels. By the example of the calculation analysis for the core samples of the Urnenskoye and Verkhnechonskoye deposits, the possibilities of calculating RPP are shown when using the stochastic distribution of pores by diameters and medium-flow diameters.

Thermal Modeling and Analysis of a Cryogenic Tank Design Exposed to Extreme Heating Profiles

NASA Technical Reports Server (NTRS)

Stephens, Craig A.; Hanna, Gregory J.

1991-01-01

A cryogenic test article, the Generic Research Cryogenic Tank, was designed to qualitatively simulate the thermal response of transatmospheric vehicle fuel tanks exposed to the environment of hypersonic flight. One-dimensional and two-dimensional finite-difference thermal models were developed to simulate the thermal response and assist in the design of the Generic Research Cryogenic Tank. The one-dimensional thermal analysis determined the required insulation thickness to meet the thermal design criteria and located the purge jacket to eliminate the liquefaction of air. The two-dimensional thermal analysis predicted the temperature gradients developed within the pressure-vessel wall, estimated the cryogen boiloff, and showed the effects the ullage condition has on pressure-vessel temperatures. The degree of ullage mixing, location of the applied high-temperature profile, and the purge gas influence on insulation thermal conductivity had significant effects on the thermal behavior of the Generic Research Cryogenic Tank. In addition to analysis results, a description of the Generic Research Cryogenic Tank and the role it will play in future thermal structures and transatmospheric vehicle research at the NASA Dryden Flight Research Facility is presented.

Integration of the primary health care approach into a community nursing science curriculum.

PubMed

Vilakazi, S S; Chabeli, M M; Roos, S D

2000-12-01

The purpose of this article is to explore and describe guidelines for integration of the primary health care approach into a Community Nursing Science Curriculum in a Nursing College in Gauteng. A qualitative, exploratory, descriptive and contextual research design was utilized. The focus group interviews were conducted with community nurses and nurse educators as respondents. Data were analysed by a qualitative descriptive method of analysis as described in Creswell (1994: 155). Respondents in both groups held similar perceptions regarding integration of primary health care approach into a Community Nursing Science Curriculum. Five categories, which are in line with the curriculum cycle, were identified as follows: situation analysis, selection and organisation of objectives/goals, content, teaching methods and evaluation. Guidelines and recommendations for the integration of the primary health care approach into a Community Nursing Science Curriculum were described.

Use of modeling to identify vulnerabilities to human error in laparoscopy.

PubMed

Funk, Kenneth H; Bauer, James D; Doolen, Toni L; Telasha, David; Nicolalde, R Javier; Reeber, Miriam; Yodpijit, Nantakrit; Long, Myra

2010-01-01

This article describes an exercise to investigate the utility of modeling and human factors analysis in understanding surgical processes and their vulnerabilities to medical error. A formal method to identify error vulnerabilities was developed and applied to a test case of Veress needle insertion during closed laparoscopy. A team of 2 surgeons, a medical assistant, and 3 engineers used hierarchical task analysis and Integrated DEFinition language 0 (IDEF0) modeling to create rich models of the processes used in initial port creation. Using terminology from a standardized human performance database, detailed task descriptions were written for 4 tasks executed in the process of inserting the Veress needle. Key terms from the descriptions were used to extract from the database generic errors that could occur. Task descriptions with potential errors were translated back into surgical terminology. Referring to the process models and task descriptions, the team used a modified failure modes and effects analysis (FMEA) to consider each potential error for its probability of occurrence, its consequences if it should occur and be undetected, and its probability of detection. The resulting likely and consequential errors were prioritized for intervention. A literature-based validation study confirmed the significance of the top error vulnerabilities identified using the method. Ongoing work includes design and evaluation of procedures to correct the identified vulnerabilities and improvements to the modeling and vulnerability identification methods. Copyright 2010 AAGL. Published by Elsevier Inc. All rights reserved.

Performance of Language-Coordinated Collective Systems: A Study of Wine Recognition and Description

PubMed Central

Zubek, Julian; Denkiewicz, Michał; Dębska, Agnieszka; Radkowska, Alicja; Komorowska-Mach, Joanna; Litwin, Piotr; Stępień, Magdalena; Kucińska, Adrianna; Sitarska, Ewa; Komorowska, Krystyna; Fusaroli, Riccardo; Tylén, Kristian; Rączaszek-Leonardi, Joanna

2016-01-01

Most of our perceptions of and engagements with the world are shaped by our immersion in social interactions, cultural traditions, tools and linguistic categories. In this study we experimentally investigate the impact of two types of language-based coordination on the recognition and description of complex sensory stimuli: that of red wine. Participants were asked to taste, remember and successively recognize samples of wines within a larger set in a two-by-two experimental design: (1) either individually or in pairs, and (2) with or without the support of a sommelier card—a cultural linguistic tool designed for wine description. Both effectiveness of recognition and the kinds of errors in the four conditions were analyzed. While our experimental manipulations did not impact recognition accuracy, bias-variance decomposition of error revealed non-trivial differences in how participants solved the task. Pairs generally displayed reduced bias and increased variance compared to individuals, however the variance dropped significantly when they used the sommelier card. The effect of sommelier card reducing the variance was observed only in pairs, individuals did not seem to benefit from the cultural linguistic tool. Analysis of descriptions generated with the aid of sommelier cards shows that pairs were more coherent and discriminative than individuals. The findings are discussed in terms of global properties and dynamics of collective systems when constrained by different types of cultural practices. PMID:27729875

RI 1170 advanced strapdown gyro

NASA Technical Reports Server (NTRS)

1973-01-01

The major components of the RI 1170 gyroscope are described. A detailed functional description of the electronics including block diagrams and photographs of output waveshapes within the loop electronics are presented. An electronic data flow diagram is included. Those gyro subassemblies that were originally planned and subsequently changed or modified for one reason or another are discussed in detail. Variations to the original design included the capacitive pickoffs, torquer flexleads, magnetic suspension, gas bearings, electronic design, and packaging. The selection of components and changes from the original design and components selected are discussed. Device failures experienced throughout the program are reported and design corrections to eliminate the failure modes are noted. Major design deficiencies such as those of the MSE electronics are described in detail. Modifications made to the gas bearing parts and design improvements to the wheel are noted. Changes to the gas bearing prints are included as well as a mathematical analysis of the 1170 gas bearing wheel by computer analysis. The mean free-path effects on gas bearing performance is summarized.

Analysis of pre-service physics teacher skills designing simple physics experiments based technology

NASA Astrophysics Data System (ADS)

Susilawati; Huda, C.; Kurniawan, W.; Masturi; Khoiri, N.

2018-03-01

Pre-service physics teacher skill in designing simple experiment set is very important in adding understanding of student concept and practicing scientific skill in laboratory. This study describes the skills of physics students in designing simple experiments based technologicall. The experimental design stages include simple tool design and sensor modification. The research method used is descriptive method with the number of research samples 25 students and 5 variations of simple physics experimental design. Based on the results of interviews and observations obtained the results of pre-service physics teacher skill analysis in designing simple experimental physics charged technology is good. Based on observation result, pre-service physics teacher skill in designing simple experiment is good while modification and sensor application are still not good. This suggests that pre-service physics teacher still need a lot of practice and do experiments in designing physics experiments using sensor modifications. Based on the interview result, it is found that students have high enough motivation to perform laboratory activities actively and students have high curiosity to be skilled at making simple practicum tool for physics experiment.

The Loyal Opposition Comments on Plan Domain Description Languages

NASA Technical Reports Server (NTRS)

Frank, Jeremy; Golden, Keith; Jonsson, Ari

2003-01-01

In this paper we take a critical look at PDDL 2.1 as designers and users of plan domain description languages. We describe planning domains that have features which are hard to model using PDDL 2.1. We then offer some suggestions on domain description language design, and describe how these suggestions make modeling our chosen domains easier.

MAPA: Implementation of the Standard Interchange Format and use for analyzing lattices

NASA Astrophysics Data System (ADS)

Shasharina, Svetlana G.; Cary, John R.

1997-05-01

MAPA (Modular Accelerator Physics Analysis) is an object oriented application for accelerator design and analysis with a Motif based graphical user interface. MAPA has been ported to AIX, Linux, HPUX, Solaris, and IRIX. MAPA provides an intuitive environment for accelerator study and design. The user can bring up windows for fully nonlinear analysis of accelerator lattices in any number of dimensions. The current graphical analysis methods of Lifetime plots and Surfaces of Section have been used to analyze the improved lattice designs of Wan, Cary, and Shasharina (this conference). MAPA can now read and write Standard Interchange Format (MAD) accelerator description files and it has a general graphical user interface for adding, changing, and deleting elements. MAPA's consistency checks prevent deletion of used elements and prevent creation of recursive beam lines. Plans include development of a richer set of modeling tools and the ability to invoke existing modeling codes through the MAPA interface. MAPA will be demonstrated on a Pentium 150 laptop running Linux.

Methods for structural design at elevated temperatures

NASA Technical Reports Server (NTRS)

Ellison, A. M.; Jones, W. E., Jr.; Leimbach, K. R.

1973-01-01

A procedure which can be used to design elevated temperature structures is discussed. The desired goal is to have the same confidence in the structural integrity at elevated temperature as the factor of safety gives on mechanical loads at room temperature. Methods of design and analysis for creep, creep rupture, and creep buckling are presented. Example problems are included to illustrate the analytical methods. Creep data for some common structural materials are presented. Appendix B is description, user's manual, and listing for the creep analysis program. The program predicts time to a given creep or to creep rupture for a material subjected to a specified stress-temperature-time spectrum. Fatigue at elevated temperature is discussed. Methods of analysis for high stress-low cycle fatigue, fatigue below the creep range, and fatigue in the creep range are included. The interaction of thermal fatigue and mechanical loads is considered, and a detailed approach to fatigue analysis is given for structures operating below the creep range.

Recent Advances in the Analysis of Spiral Bevel Gears

NASA Technical Reports Server (NTRS)

Handschuh, Robert F.

1997-01-01

A review of recent progress for the analysis of spiral bevel gears will be described. The foundation of this work relies on the description of the gear geometry of face-milled spiral bevel gears via the approach developed by Litvin. This methodology was extended by combining the basic gear design data with the manufactured surfaces using a differential geometry approach, and provides the data necessary for assembling three-dimensional finite element models. The finite element models have been utilized to conduct thermal and structural analysis of the gear system. Examples of the methods developed for thermal and structural/contact analysis are presented.

Nuclear reactor descriptions for space power systems analysis

NASA Technical Reports Server (NTRS)

Mccauley, E. W.; Brown, N. J.

1972-01-01

For the small, high performance reactors required for space electric applications, adequate neutronic analysis is of crucial importance, but in terms of computational time consumed, nuclear calculations probably yield the least amount of detail for mission analysis study. It has been found possible, after generation of only a few designs of a reactor family in elaborate thermomechanical and nuclear detail to use simple curve fitting techniques to assure desired neutronic performance while still performing the thermomechanical analysis in explicit detail. The resulting speed-up in computation time permits a broad detailed examination of constraints by the mission analyst.

MHOST version 4.2. Volume 1: Users' manual

NASA Technical Reports Server (NTRS)

Nakazawa, Shohei

1989-01-01

This manual describes the user options available for running the MHOST finite element analysis package. MHOST is a solid and structural analysis program based on mixed finite element technology, and is specifically designed for three-dimensional inelastic analysis. A family of two- and three-dimensional continuum elements along with beam and shell structural elements can be utilized. Many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. An overview of the algorithms, a general description of the input data formats, and a discussion of input data for selecting solution algorithms are given.

Design Criteria For Networked Image Analysis System

NASA Astrophysics Data System (ADS)

Reader, Cliff; Nitteberg, Alan

1982-01-01

Image systems design is currently undergoing a metamorphosis from the conventional computing systems of the past into a new generation of special purpose designs. This change is motivated by several factors, notably among which is the increased opportunity for high performance with low cost offered by advances in semiconductor technology. Another key issue is a maturing in understanding of problems and the applicability of digital processing techniques. These factors allow the design of cost-effective systems that are functionally dedicated to specific applications and used in a utilitarian fashion. Following an overview of the above stated issues, the paper presents a top-down approach to the design of networked image analysis systems. The requirements for such a system are presented, with orientation toward the hospital environment. The three main areas are image data base management, viewing of image data and image data processing. This is followed by a survey of the current state of the art, covering image display systems, data base techniques, communications networks and software systems control. The paper concludes with a description of the functional subystems and architectural framework for networked image analysis in a production environment.

37 CFR 251.48 - Rules of evidence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... furnished: (1) Sample surveys. (i) A clear description of the survey design, the definition of the universe...) A complete description of the design, the controlled conditions, and the implementation of controls...

37 CFR 251.48 - Rules of evidence.

Code of Federal Regulations, 2011 CFR

2011-07-01

... furnished: (1) Sample surveys. (i) A clear description of the survey design, the definition of the universe...) A complete description of the design, the controlled conditions, and the implementation of controls...

Adaptation of object descriptions to a partner under increasing communicative demands: a comparison of children with and without autism.

PubMed

Nadig, Aparna; Vivanti, Giacomo; Ozonoff, Sally

2009-12-01

This study compared the object descriptions of school-age children with high-functioning autism (HFA) with those of a matched group of typically developing children. Descriptions were elicited in a referential communication task where shared information was manipulated, and in a guessing game where clues had to be provided about the identity of an object that was hidden from the addressee. Across these tasks, increasingly complex levels of audience design were assessed: (1) the ability to give adequate descriptions from one's own perspective, (2) the ability to adjust descriptions to an addressee's perspective when this differs from one's own, and (3) the ability to provide indirect yet identifying descriptions in a situation where explicit labeling is inappropriate. Results showed that there were group differences in all three cases, with the HFA group giving less efficient descriptions with respect to the relevant context than the comparison group. More revealing was the identification of distinct adaptation profiles among the HFA participants: those who had difficulty with all three levels, those who displayed Level 1 audience design but poor Level 2 and Level 3 design, and those demonstrated all three levels of audience design, like the majority of the comparison group. Higher structural language ability, rather than symptom severity or social skills, differentiated those HFA participants with typical adaptation profiles from those who displayed deficient audience design, consistent with previous reports of language use in autism.

Performance Analysis and Design Synthesis (PADS) computer program. Volume 2: Program description, part 1

NASA Technical Reports Server (NTRS)

1972-01-01

The Performance Analysis and Design Synthesis (PADS) computer program has a two-fold purpose. It can size launch vehicles in conjunction with calculus-of-variations optimal trajectories and can also be used as a general-purpose branched trajectory optimization program. In the former use, it has the Space Shuttle Synthesis Program as well as a simplified stage weight module for optimally sizing manned recoverable launch vehicles. For trajectory optimization alone or with sizing, PADS has two trajectory modules. The first trajectory module uses the method of steepest descent; the second employs the method of quasilinearization, which requires a starting solution from the first trajectory module. For Volume 1 see N73-13199.

Performance Analysis and Design Synthesis (PADS) computer program. Volume 2: Program description, part 2

NASA Technical Reports Server (NTRS)

1972-01-01

The QL module of the Performance Analysis and Design Synthesis (PADS) computer program is described. Execution of this module is initiated when and if subroutine PADSI calls subroutine GROPE. Subroutine GROPE controls the high level logical flow of the QL module. The purpose of the module is to determine a trajectory that satisfies the necessary variational conditions for optimal performance. The module achieves this by solving a nonlinear multi-point boundary value problem. The numerical method employed is described. It is an iterative technique that converges quadratically when it does converge. The three basic steps of the module are: (1) initialization, (2) iteration, and (3) culmination. For Volume 1 see N73-13199.

Extended GTST-MLD for aerospace system safety analysis.

PubMed

Guo, Chiming; Gong, Shiyu; Tan, Lin; Guo, Bo

2012-06-01

The hazards caused by complex interactions in the aerospace system have become a problem that urgently needs to be settled. This article introduces a method for aerospace system hazard interaction identification based on extended GTST-MLD (goal tree-success tree-master logic diagram) during the design stage. GTST-MLD is a functional modeling framework with a simple architecture. Ontology is used to extend the ability of system interaction description in GTST-MLD by adding the system design knowledge and the past accident experience. From the level of functionality and equipment, respectively, this approach can help the technician detect potential hazard interactions. Finally, a case is used to show the method. © 2011 Society for Risk Analysis.

Demonstration Advanced Avionics System (DAAS), Phase 1

NASA Technical Reports Server (NTRS)

Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

1981-01-01

Demonstration advanced anionics system (DAAS) function description, hardware description, operational evaluation, and failure mode and effects analysis (FMEA) are provided. Projected advanced avionics system (PAAS) description, reliability analysis, cost analysis, maintainability analysis, and modularity analysis are discussed.

Vlasov analysis of microbunching instability for magnetized beams

DOE PAGES

Tsai, C. -Y.; Derbenev, Ya. S.; Douglas, D.; ...

2017-05-19

For a high-brightness electron beam with low energy and high bunch charge traversing a recirculation beamline, coherent synchrotron radiation and space charge effect may result in the microbunching instability (MBI). Both tracking simulation and Vlasov analysis for an early design of Circulator Cooler Ring for the Jefferson Lab Electron Ion Collider reveal significant MBI. It is envisioned these could be substantially suppressed by using a magnetized beam. In this work, we extend the existing Vlasov analysis, originally developed for a non-magnetized beam, to the description of transport of a magnetized beam including relevant collective effects. As a result, the newmore » formulation will be further employed to confirm prediction of microbunching suppression for a magnetized beam transport in a recirculating machine design.« less

Software Users Manual (SUM): Extended Testability Analysis (ETA) Tool

NASA Technical Reports Server (NTRS)

Maul, William A.; Fulton, Christopher E.

2011-01-01

This software user manual describes the implementation and use the Extended Testability Analysis (ETA) Tool. The ETA Tool is a software program that augments the analysis and reporting capabilities of a commercial-off-the-shelf (COTS) testability analysis software package called the Testability Engineering And Maintenance System (TEAMS) Designer. An initial diagnostic assessment is performed by the TEAMS Designer software using a qualitative, directed-graph model of the system being analyzed. The ETA Tool utilizes system design information captured within the diagnostic model and testability analysis output from the TEAMS Designer software to create a series of six reports for various system engineering needs. The ETA Tool allows the user to perform additional studies on the testability analysis results by determining the detection sensitivity to the loss of certain sensors or tests. The ETA Tool was developed to support design and development of the NASA Ares I Crew Launch Vehicle. The diagnostic analysis provided by the ETA Tool was proven to be valuable system engineering output that provided consistency in the verification of system engineering requirements. This software user manual provides a description of each output report generated by the ETA Tool. The manual also describes the example diagnostic model and supporting documentation - also provided with the ETA Tool software release package - that were used to generate the reports presented in the manual

User's manual for the Simulated Life Analysis of Vehicle Elements (SLAVE) model

NASA Technical Reports Server (NTRS)

Paul, D. D., Jr.

1972-01-01

The simulated life analysis of vehicle elements model was designed to perform statistical simulation studies for any constant loss rate. The outputs of the model consist of the total number of stages required, stages successfully completing their lifetime, and average stage flight life. This report contains a complete description of the model. Users' instructions and interpretation of input and output data are presented such that a user with little or no prior programming knowledge can successfully implement the program.

Thermal/structural Tailoring of Engine Blades (T/STAEBL) User's Manual

NASA Technical Reports Server (NTRS)

Brown, K. W.; Clevenger, W. B.; Arel, J. D.

1994-01-01

The Thermal/Structural Tailoring of Engine Blades (T/STAEBL) system is a family of computer programs executed by a control program. The T/STAEBL system performs design optimizations of cooled, hollow turbine blades and vanes. This manual contains an overview of the system, fundamentals of the data block structure, and detailed descriptions of the inputs required by the optimizer. Additionally, the thermal analysis input requirements are described as well as the inputs required to perform a finite element blade vibrations analysis.

Transonic propulsion system integration analysis at McDonnell Aircraft Company

NASA Technical Reports Server (NTRS)

Cosner, Raymond R.

1989-01-01

The technology of Computational Fluid Dynamics (CFD) is becoming an important tool in the development of aircraft propulsion systems. Two of the most valuable features of CFD are: (1) quick acquisition of flow field data; and (2) complete description of flow fields, allowing detailed investigation of interactions. Current analysis methods complement wind tunnel testing in several ways. Herein, the discussion is focused on CFD methods. However, aircraft design studies need data from both CFD and wind tunnel testing. Each approach complements the other.

Near-term hybrid vehicle program, phase 1. Appendix A: Mission analysis and performance specification studies report

NASA Technical Reports Server (NTRS)

1979-01-01

Results of a study leading to the preliminary design of a five passenger hybrid vehicle utilizing two energy sources (electricity and gasoline/diesel fuel) to minimize petroleum usage on a fleet basis are presented. The study methodology is described. Vehicle characterizations, the mission description, characterization, and impact on potential sales, and the rationale for the selection of the reference internal combustion engine vehicle are presented. Conclusions and recommendations of the mission analysis and performance specification report are included.

Employing a Qualitative Description Approach in Health Care Research.

PubMed

Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

2017-01-01

A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage.

Employing a Qualitative Description Approach in Health Care Research

PubMed Central

Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

2017-01-01

A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage. PMID:29204457

Hardware acceleration and verification of systems designed with hardware description languages (HDL)

NASA Astrophysics Data System (ADS)

Wisniewski, Remigiusz; Wegrzyn, Marek

2005-02-01

Hardware description languages (HDLs) allow creating bigger and bigger designs nowadays. The size of prototyped systems very often exceeds million gates. Therefore verification process of the designs takes several hours or even days. The solution for this problem can be solved by hardware acceleration of simulation.

Mapping the Diagnosis Axis of an Interface Terminology to the NANDA International Taxonomy

PubMed Central

Juvé Udina, Maria-Eulàlia; Gonzalez Samartino, Maribel; Matud Calvo, Cristina

2012-01-01

Background. Nursing terminologies are designed to support nursing practice but, as with any other clinical tool, they should be evaluated. Cross-mapping is a formal method for examining the validity of the existing controlled vocabularies. Objectives. The study aims to assess the inclusiveness and expressiveness of the nursing diagnosis axis of a newly implemented interface terminology by cross-mapping with the NANDA-I taxonomy. Design/Methods. The study applied a descriptive design, using a cross-sectional, bidirectional mapping strategy. The sample included 728 concepts from both vocabularies. Concept cross-mapping was carried out to identify one-to-one, negative, and hierarchical connections. The analysis was conducted using descriptive statistics. Results. Agreement of the raters' mapping achieved 97%. More than 60% of the nursing diagnosis concepts in the NANDA-I taxonomy were mapped to concepts in the diagnosis axis of the new interface terminology; 71.1% were reversely mapped. Conclusions. Main results for outcome measures suggest that the diagnosis axis of this interface terminology meets the validity criterion of cross-mapping when mapped from and to the NANDA-I taxonomy. PMID:22830046

Mapping the Diagnosis Axis of an Interface Terminology to the NANDA International Taxonomy.

PubMed

Juvé Udina, Maria-Eulàlia; Gonzalez Samartino, Maribel; Matud Calvo, Cristina

2012-01-01

Background. Nursing terminologies are designed to support nursing practice but, as with any other clinical tool, they should be evaluated. Cross-mapping is a formal method for examining the validity of the existing controlled vocabularies. Objectives. The study aims to assess the inclusiveness and expressiveness of the nursing diagnosis axis of a newly implemented interface terminology by cross-mapping with the NANDA-I taxonomy. Design/Methods. The study applied a descriptive design, using a cross-sectional, bidirectional mapping strategy. The sample included 728 concepts from both vocabularies. Concept cross-mapping was carried out to identify one-to-one, negative, and hierarchical connections. The analysis was conducted using descriptive statistics. Results. Agreement of the raters' mapping achieved 97%. More than 60% of the nursing diagnosis concepts in the NANDA-I taxonomy were mapped to concepts in the diagnosis axis of the new interface terminology; 71.1% were reversely mapped. Conclusions. Main results for outcome measures suggest that the diagnosis axis of this interface terminology meets the validity criterion of cross-mapping when mapped from and to the NANDA-I taxonomy.

General description and understanding of the nonlinear dynamics of mode-locked fiber lasers.

PubMed

Wei, Huai; Li, Bin; Shi, Wei; Zhu, Xiushan; Norwood, Robert A; Peyghambarian, Nasser; Jian, Shuisheng

2017-05-02

As a type of nonlinear system with complexity, mode-locked fiber lasers are known for their complex behaviour. It is a challenging task to understand the fundamental physics behind such complex behaviour, and a unified description for the nonlinear behaviour and the systematic and quantitative analysis of the underlying mechanisms of these lasers have not been developed. Here, we present a complexity science-based theoretical framework for understanding the behaviour of mode-locked fiber lasers by going beyond reductionism. This hierarchically structured framework provides a model with variable dimensionality, resulting in a simple view that can be used to systematically describe complex states. Moreover, research into the attractors' basins reveals the origin of stochasticity, hysteresis and multistability in these systems and presents a new method for quantitative analysis of these nonlinear phenomena. These findings pave the way for dynamics analysis and system designs of mode-locked fiber lasers. We expect that this paradigm will also enable potential applications in diverse research fields related to complex nonlinear phenomena.

NDARC NASA Design and Analysis of Rotorcraft - Input, Appendix 4

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description consists of all the information, input and derived, that denes the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions. The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for anti-torque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude.

Factors affecting quality of social interaction park in Jakarta

NASA Astrophysics Data System (ADS)

Mangunsong, N. I.

2018-01-01

The existence of social interactions park in Jakarta is an oasis in the middle of a concrete jungle. Parks is a response to the need for open space as a place of recreation and community interaction. Often the social interaction parks built by the government does not function as expected, but other functions such as a place to sell, trash, unsafe so be rarely visited by visitors. The purpose of this study was to analyze the factors that affect the quality of social interaction parks in Jakarta by conducting descriptive analysis and correlation analysis of the variables assessment. The results of the analysis can give an idea of social interactions park based on community needs and propose the development of social interactioncity park. The object of study are 25 social interaction parks in 5 municipalities of Jakarta. The method used is descriptive analysis method, correlation analysis using SPSS 19 and using crosstab, chi-square tests. The variables are 5 aspects of Design, Plants composition: Selection type of plant (D); the beauty and harmony (Ind); Maintenance and fertility (P); Cleanliness and Environmental Health (BS); Specificity (Drainage, Multi Function garden, Means, Concern/Mutual cooperation, in dense settlements) (K). The results of analysis show that beauty is the most significant correlation with the value of the park followed by specificity, cleanliness and maintenance. Design was not the most significant variable affecting the quality of the park. The results of this study can be used by the Department of Parks and Cemeteries as input in managing park existing or to be developed and to improve the quality of social interaction park in Jakarta.

Automatic Requirements Specification Extraction from Natural Language (ARSENAL)

DTIC Science & Technology

2014-10-01

designers, implementers) involved in the design of software systems. However, natural language descriptions can be informal, incomplete, imprecise...communication of technical descriptions between the various stakeholders (e.g., customers, designers, imple- menters) involved in the design of software systems...the accuracy of the natural language processing stage, the degree of automation, and robustness to noise. 1 2 Introduction Software systems operate in

Federal Support to Universities, Colleges, and Selected Nonprofit Institutions, Fiscal Year 1977. A Report to the President and Congress. Surveys of Science Resources Series.

ERIC Educational Resources Information Center

Huckenpahler, J. G.; Bennof, Richard J.

Data collected in the National Science Foundation's Survey of Federal Support to Universities, Colleges, and Selected Nonprofit Institutions, descriptive analysis are presented. Federal support to universities and colleges is designated by: type of activity (research and development, R&D plant, nonscience activities); funding agency; geographic…

Can Low-income Americans Afford to Satisfy MyPyramid Fruit and Vegetable Guidelines?

ERIC Educational Resources Information Center

Stewart, Hayden; Hyman, Jeffrey; Frazao, Elizabeth; Buzby, Jean C.; Carlson, Andrea

2011-01-01

Objective: To estimate the costs of satisfying MyPyramid fruit and vegetable guidelines, with a focus on whether low-income households can bear these costs. Design: Descriptive analysis of the 2008 National Consumer Panel with information on the food purchases of 64,440 households across the contiguous United States was used to analyze the cost of…

Birth Outcomes across Three Rural-Urban Typologies in the Finger Lakes Region of New York

ERIC Educational Resources Information Center

Strutz, Kelly L.; Dozier, Ann M.; van Wijngaarden, Edwin; Glantz, J. Christopher

2012-01-01

Purpose: The study is a descriptive, population-based analysis of birth outcomes in the New York State Finger Lakes region designed to determine whether perinatal outcomes differed across 3 rural typologies. Methods: Hospital birth data for the Finger Lakes region from 2006 to 2007 were used to identify births classified as low birthweight (LBW),…

Women of the World: Near East and North Africa.

ERIC Educational Resources Information Center

Chamie, Mary

The third in a series of five handbooks designed to present and analyze statistical data on women in various regions of the world, this handbook focuses on women in 14 countries in the Near East and North Africa. Beginning with an overview of population distribution and changes in the region, the analysis continues with a description of women's…

An Analysis of Teacher Candidates' Usage Level of Metacognitive Learning Strategies: Sample of a University in Turkey

ERIC Educational Resources Information Center

Yesilyurt, Etem

2013-01-01

The purpose of this research is to evaluate the level metacognitive learning strategies are used by teacher candidates. The study was designed as a descriptive research. Study group of present research consists of 291 teacher candidates studying in the Faculty of Education within the body of a Western Anatolian university in Turkey. Research…

Expedited Systems Engineering for Rapid Capability and Urgent Needs

DTIC Science & Technology

2012-12-31

rapid organizations start to differ from traditional ones, and there is a shift in energy , commitment, and knowledge. These findings are motivated by...123 C.7.1 Description: Integration of Modeling and Simulation , Software Design, and...differ from traditional ones, and there is a shift in energy , commitment, and knowledge. These findings are motivated by an analysis of effective

A Descriptive Analysis of the Cary Leadership Fellows Program: An Experiment in Training for Educational Leadership.

ERIC Educational Resources Information Center

Rosen, Jacqueline; Palmer, Mary B.

The program treated in this document assumes that most present educational leaders are perhaps not as effectively trained as possible. Funded by the Mary Flager Cary Trust, the 5-year project is designed to train a selected group of experienced teachers of children--especially minority group teachers from inner-city schools--to become educational…

A COST-EFFECTIVENESS MODEL FOR THE ANALYSIS OF TITLE I ESEA PROJECT PROPOSALS, PART I-VII.

ERIC Educational Resources Information Center

ABT, CLARK C.

SEVEN SEPARATE REPORTS DESCRIBE AN OVERVIEW OF A COST-EFFECTIVENESS MODEL AND FIVE SUBMODELS FOR EVALUATING THE EFFECTIVENESS OF ELEMENTARY AND SECONDARY ACT TITLE I PROPOSALS. THE DESIGN FOR THE MODEL ATTEMPTS A QUANTITATIVE DESCRIPTION OF EDUCATION SYSTEMS WHICH MAY BE PROGRAMED AS A COMPUTER SIMULATION TO INDICATE THE IMPACT OF A TITLE I…

The Feasibility of Personal Digital Assistants (PDAs) to Collect Dietary Intake Data in Low-Income Pregnant Women

ERIC Educational Resources Information Center

Fowles, Eileen R.; Gentry, Breine

2008-01-01

Objectives: To determine the feasibility of using personal digital assistant (PDA)-based technology for tracking and analysis of food intake in low-income pregnant women. Design: Descriptive. Participants provided an initial 24-hour dietary recall and recorded their food intake using a PDA-based software program for 2 days. Setting: Recruitment…

Videotex in Education: Current Developments in Screen Design, Data Structure, and Access Control.

ERIC Educational Resources Information Center

Kerr, Stephen T.

This four-section paper begins with a brief description of videotex and the paths its development has followed during its short lifespan. The second section examines how videotex systems should present and display information, and how such information should be internally organized so that it is maximally useful for the reader/user. The analysis,…

Analysis of Principals' Managerial Competencies for Effective Management of School Resources in Secondary Schools in Anambra State, Nigeria

ERIC Educational Resources Information Center

Victor, Akinfolarin Akinwale

2017-01-01

This study analyses principals' managerial competencies for effective management of school resources in secondary schools in Anambra State. The study was conducted in Anambra State. The study population comprised 257 principals in public secondary schools in the State. The study adopted a descriptive survey design. A 24 items researcher developed…

Evaluation of a Multiple Mediator Model of the Relationship between Core Self-Evaluations and Job Satisfaction in Employed Individuals with Disabilities

ERIC Educational Resources Information Center

Smedema, Susan Miller; Kesselmayer, Rachel Friefeld; Peterson, Lauren

2018-01-01

Purpose: To test a meditation model of the relationship between core self-evaluations (CSE) and job satisfaction in employed individuals with disabilities. Method: A quantitative descriptive design using Hayes's (2012) PROCESS macro for SPSS and multiple regression analysis. Two-hundred fifty-nine employed persons with disabilities were recruited…

Recent trends in particle size analysis techniques

NASA Technical Reports Server (NTRS)

Kang, S. H.

1984-01-01

Recent advances and developments in the particle-sizing technologies are briefly reviewed in accordance with three operating principles including particle size and shape descriptions. Significant trends of the particle size analysing equipment recently developed show that compact electronic circuitry and rapid data processing systems were mainly adopted in the instrument design. Some newly developed techniques characterizing the particulate system were also introduced.

A Decade's Difference: Research Revisited on Family Influence of Rural High School Students' Postsecondary Decisions

ERIC Educational Resources Information Center

Legutko, Robert S.

2008-01-01

This study is a quantitative descriptive research design which compared 1995 and 2005 data regarding family influence on rural Pennsylvania high school seniors' postsecondary decisions. A chi-square analysis at p less than 0.05 determined that there was (a) an increase in students planning college attendance, (b) a decrease in students not…

Design and implementation of highly parallel pipelined VLSI systems

NASA Astrophysics Data System (ADS)

Delange, Alphonsus Anthonius Jozef

A methodology and its realization as a prototype CAD (Computer Aided Design) system for the design and analysis of complex multiprocessor systems is presented. The design is an iterative process in which the behavioral specifications of the system components are refined into structural descriptions consisting of interconnections and lower level components etc. A model for the representation and analysis of multiprocessor systems at several levels of abstraction and an implementation of a CAD system based on this model are described. A high level design language, an object oriented development kit for tool design, a design data management system, and design and analysis tools such as a high level simulator and graphics design interface which are integrated into the prototype system and graphics interface are described. Procedures for the synthesis of semiregular processor arrays, and to compute the switching of input/output signals, memory management and control of processor array, and sequencing and segmentation of input/output data streams due to partitioning and clustering of the processor array during the subsequent synthesis steps, are described. The architecture and control of a parallel system is designed and each component mapped to a module or module generator in a symbolic layout library, compacted for design rules of VLSI (Very Large Scale Integration) technology. An example of the design of a processor that is a useful building block for highly parallel pipelined systems in the signal/image processing domains is given.

RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part I: Theory and description of model capabilities

NASA Astrophysics Data System (ADS)

Raffray, A. René; Federici, Gianfranco

1997-04-01

RACLETTE (Rate Analysis Code for pLasma Energy Transfer Transient Evaluation), a comprehensive but relatively simple and versatile model, was developed to help in the design analysis of plasma facing components (PFCs) under 'slow' high power transients, such as those associated with plasma vertical displacement events. The model includes all the key surface heat transfer processes such as evaporation, melting, and radiation, and their interaction with the PFC block thermal response and the coolant behaviour. This paper represents part I of two sister and complementary papers. It covers the model description, calibration and validation, and presents a number of parametric analyses shedding light on and identifying trends in the PFC armour block response to high plasma energy deposition transients. Parameters investigated include the plasma energy density and deposition time, the armour thickness and the presence of vapour shielding effects. Part II of the paper focuses on specific design analyses of ITER plasma facing components (divertor, limiter, primary first wall and baffle), including improvements in the thermal-hydraulic modeling required for better understanding the consequences of high energy deposition transients in particular for the ITER limiter case.

BETA: Behavioral testability analyzer and its application to high-level test generation and synthesis for testability. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Chen, Chung-Hsing

1992-01-01

In this thesis, a behavioral-level testability analysis approach is presented. This approach is based on analyzing the circuit behavioral description (similar to a C program) to estimate its testability by identifying controllable and observable circuit nodes. This information can be used by a test generator to gain better access to internal circuit nodes and to reduce its search space. The results of the testability analyzer can also be used to select test points or partial scan flip-flops in the early design phase. Based on selection criteria, a novel Synthesis for Testability approach call Test Statement Insertion (TSI) is proposed, which modifies the circuit behavioral description directly. Test Statement Insertion can also be used to modify circuit structural description to improve its testability. As a result, Synthesis for Testability methodology can be combined with an existing behavioral synthesis tool to produce more testable circuits.

Model-based object classification using unification grammars and abstract representations

NASA Astrophysics Data System (ADS)

Liburdy, Kathleen A.; Schalkoff, Robert J.

1993-04-01

The design and implementation of a high level computer vision system which performs object classification is described. General object labelling and functional analysis require models of classes which display a wide range of geometric variations. A large representational gap exists between abstract criteria such as `graspable' and current geometric image descriptions. The vision system developed and described in this work addresses this problem and implements solutions based on a fusion of semantics, unification, and formal language theory. Object models are represented using unification grammars, which provide a framework for the integration of structure and semantics. A methodology for the derivation of symbolic image descriptions capable of interacting with the grammar-based models is described and implemented. A unification-based parser developed for this system achieves object classification by determining if the symbolic image description can be unified with the abstract criteria of an object model. Future research directions are indicated.

Measuring the impact of medicines regulatory interventions - Systematic review and methodological considerations.

PubMed

Goedecke, Thomas; Morales, Daniel R; Pacurariu, Alexandra; Kurz, Xavier

2018-03-01

Evaluating the public health impact of regulatory interventions is important but there is currently no common methodological approach to guide this evaluation. This systematic review provides a descriptive overview of the analytical methods for impact research. We searched MEDLINE and EMBASE for articles with an empirical analysis evaluating the impact of European Union or non-European Union regulatory actions to safeguard public health published until March 2017. References from systematic reviews and articles from other known sources were added. Regulatory interventions, data sources, outcomes of interest, methodology and key findings were extracted. From 1246 screened articles, 229 were eligible for full-text review and 153 articles in English language were included in the descriptive analysis. Over a third of articles studied analgesics and antidepressants. Interventions most frequently evaluated are regulatory safety communications (28.8%), black box warnings (23.5%) and direct healthcare professional communications (10.5%); 55% of studies measured changes in drug utilization patterns, 27% evaluated health outcomes, and 18% targeted knowledge, behaviour or changes in clinical practice. Unintended consequences like switching therapies or spill-over effects were rarely evaluated. Two-thirds used before-after time series and 15.7% before-after cross-sectional study designs. Various analytical approaches were applied including interrupted time series regression (31.4%), simple descriptive analysis (28.8%) and descriptive analysis with significance tests (23.5%). Whilst impact evaluation of pharmacovigilance and product-specific regulatory interventions is increasing, the marked heterogeneity in study conduct and reporting highlights the need for scientific guidance to ensure robust methodologies are applied and systematic dissemination of results occurs. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

Space Station automated systems testing/verification and the Galileo Orbiter fault protection design/verification

NASA Technical Reports Server (NTRS)

Landano, M. R.; Easter, R. W.

1984-01-01

Aspects of Space Station automated systems testing and verification are discussed, taking into account several program requirements. It is found that these requirements lead to a number of issues of uncertainties which require study and resolution during the Space Station definition phase. Most, if not all, of the considered uncertainties have implications for the overall testing and verification strategy adopted by the Space Station Program. A description is given of the Galileo Orbiter fault protection design/verification approach. Attention is given to a mission description, an Orbiter description, the design approach and process, the fault protection design verification approach/process, and problems of 'stress' testing.

PRO_LIGAND: an approach to de novo molecular design. 2. Design of novel molecules from molecular field analysis (MFA) models and pharmacophores.

PubMed

Waszkowycz, B; Clark, D E; Frenkel, D; Li, J; Murray, C W; Robson, B; Westhead, D R

1994-11-11

A computational approach for molecular design, PRO_LIGAND, has been developed within the PROMETHEUS molecular design and simulation system in order to provide a unified framework for the de novo generation of diverse molecules which are either similar or complementary to a specified target. In this instance, the target is a pharmacophore derived from a series of active structures either by a novel interpretation of molecular field analysis data or by a pharmacophore-mapping procedure based on clique detection. After a brief introduction to PRO_LIGAND, a detailed description is given of the two pharmacophore generation procedures and their abilities are demonstrated by the elucidation of pharmacophores for steroid binding and ACE inhibition, respectively. As a further indication of its efficacy in aiding the rational drug design process, PRO_LIGAND is then employed to build novel organic molecules to satisfy the physicochemical constraints implied by the pharmacophores.

VHDL simulation with access to transistor models

NASA Technical Reports Server (NTRS)

Gibson, J.

1991-01-01

Hardware description languages such as VHDL have evolved to aid in the design of systems with large numbers of elements and a wide range of electronic and logical abstractions. For high performance circuits, behavioral models may not be able to efficiently include enough detail to give designers confidence in a simulation's accuracy. One option is to provide a link between the VHDL environment and a transistor level simulation environment. The coupling of the Vantage Analysis Systems VHDL simulator and the NOVA simulator provides the combination of VHDL modeling and transistor modeling.

The conical scanner evaluation system design

NASA Technical Reports Server (NTRS)

Cumella, K. E.; Bilanow, S.; Kulikov, I. B.

1982-01-01

The software design for the conical scanner evaluation system is presented. The purpose of this system is to support the performance analysis of the LANDSAT-D conical scanners, which are infrared horizon detection attitude sensors designed for improved accuracy. The system consists of six functionally independent subsystems and five interface data bases. The system structure and interfaces of each of the subsystems is described and the content, format, and file structure of each of the data bases is specified. For each subsystem, the functional logic, the control parameters, the baseline structure, and each of the subroutines are described. The subroutine descriptions include a procedure definition and the input and output parameters.

Proposal for a low cost close air support aircraft for the year 2000: The Raptor

NASA Technical Reports Server (NTRS)

Brown, Jerome D.; Dewitt, Ward S.; Mcdonald, Mark; Riley, John W.; Roberts, Anthony E.; Watson, Sean; Whelan, Margaret M.

1991-01-01

The Raptor is a proposed low cost Close Air Support (CAS) aircraft for the U.S. Military. The Raptor incorporates a 'cranked arrow' wing planform, and uses canards instead of a traditional horizontal tail. The Raptor is designed to be capable of responsive delivery of effective ordnance in close proximity to friendly ground forces during the day, night, and 'under the weather' conditions. Details are presented of the Raptor's mission, configuration, performance, stability and control, ground support, manufacturing, and overall cost to permit engineering evaluation of the proposed design. A description of the design process and analysis methods used is also provided.

Thermal design of the IMP-I and H spacecraft

NASA Technical Reports Server (NTRS)

Hoffman, R. H.

1974-01-01

A description of the thermal subsystem of the IMP-I and H spacecraft is presented. These two spacecraft were of a larger and more advanced type in the Explorer series and were successfully launched in March 1971 and September 1972. The thermal requirements, analysis, and design of each spacecraft are described including several specific designs for individual experiments. Techniques for obtaining varying degrees of thermal isolation and contact are presented. The thermal control coatings including the spaceflight performance of silver-coated FEP Teflon are discussed. Predicted performance is compared to measured flight data. The good agreement between them verifies the validity of the thermal model and the selection of coatings.

Systems analysis of the installation, mounting, and activation of emergency locator transmitters in general aviation aircraft

NASA Technical Reports Server (NTRS)

Hall, D. S.

1980-01-01

A development program was developed to design and improve the Emergency Locator Transmitter (ELT) transmitter and to improve the installation in the aircraft and its activation subsystem. There were 1135 general aviation fixed wing aircraft accident files reviewed. A detailed description of the damage to the aircraft was produced. The search aspects of these accidents were studied. As much information as possible about the ELT units in these cases was collected. The data should assist in establishing installation and mounting criteria, better design standards for activation subsystems, and requirements for the new ELT system design in the area of crashworthiness.

System description and analysis. Part 1: Feasibility study for helicopter/VTOL wide-angle simulation image generation display system

NASA Technical Reports Server (NTRS)

1977-01-01

A preliminary design for a helicopter/VSTOL wide angle simulator image generation display system is studied. The visual system is to become part of a simulator capability to support Army aviation systems research and development within the near term. As required for the Army to simulate a wide range of aircraft characteristics, versatility and ease of changing cockpit configurations were primary considerations of the study. Due to the Army's interest in low altitude flight and descents into and landing in constrained areas, particular emphasis is given to wide field of view, resolution, brightness, contrast, and color. The visual display study includes a preliminary design, demonstrated feasibility of advanced concepts, and a plan for subsequent detail design and development. Analysis and tradeoff considerations for various visual system elements are outlined and discussed.

Safety diagnosis: are we doing a good job?

PubMed

Park, Peter Y; Sahaji, Rajib

2013-03-01

Collision diagnosis is the second step in the six-step road safety management process described in the AASHTO Highway Safety Manual (HSM). Diagnosis is designed to identify a dominant or abnormally high proportion of particular collision configurations (e.g., rear end, right angle, etc.) at a target location. The primary diagnosis method suggested in the HSM is descriptive data analysis. This type of analysis relies on, for example, pie charts, histograms, and/or collision diagrams. Using location specific collision data (e.g., collision frequency per collision configuration for a target location), safety engineers identify (the most) frequent collision configurations. Safety countermeasures are then likely to concentrate on preventing the selected collision configurations. Although its real-world application in engineering practice is limited, an additional collision diagnosis method, known as the beta-binomial (BB) test, is also presented as the secondary diagnosis tool in the HSM. The BB test compares the proportion of a particular collision configuration observed at one location with the proportion of the same collision configuration found at other reference locations which are similar to the target location in terms of selected traffic and roadway characteristics (e.g., traffic volume, traffic control, and number of lanes). This study compared the outcomes obtained from descriptive data analysis and the BB test, and investigates two questions: (1) Do descriptive data analysis and the BB tests produce the same results (i.e., do they select the same collision configurations at the same locations)? and (2) If the tests produce different results, which result should be adopted in engineering practice? This study's analysis was based on a sample of the most recent five years (2005-2009) of collision and roadway configuration data for 143 signalized intersections in the City of Saskatoon, Saskatchewan. The study results show that the BB test's role in diagnosing safety concerns in road safety engineering projects such as safety review projects for existing roadways may be just as important as the descriptive data analysis method. Copyright © 2012 Elsevier Ltd. All rights reserved.

Space Ultrareliable Modular Computer (SUMC) instruction simulator

NASA Technical Reports Server (NTRS)

Curran, R. T.

1972-01-01

The design principles, description, functional operation, and recommended expansion and enhancements are presented for the Space Ultrareliable Modular Computer interpretive simulator. Included as appendices are the user's manual, program module descriptions, target instruction descriptions, simulator source program listing, and a sample program printout. In discussing the design and operation of the simulator, the key problems involving host computer independence and target computer architectural scope are brought into focus.

Transient Ejector Analysis (TEA) code user's guide

NASA Technical Reports Server (NTRS)

Drummond, Colin K.

1993-01-01

A FORTRAN computer program for the semi analytic prediction of unsteady thrust augmenting ejector performance has been developed, based on a theoretical analysis for ejectors. That analysis blends classic self-similar turbulent jet descriptions with control-volume mixing region elements. Division of the ejector into an inlet, diffuser, and mixing region allowed flexibility in the modeling of the physics for each region. In particular, the inlet and diffuser analyses are simplified by a quasi-steady-analysis, justified by the assumption that pressure is the forcing function in those regions. Only the mixing region is assumed to be dominated by viscous effects. The present work provides an overview of the code structure, a description of the required input and output data file formats, and the results for a test case. Since there are limitations to the code for applications outside the bounds of the test case, the user should consider TEA as a research code (not as a production code), designed specifically as an implementation of the proposed ejector theory. Program error flags are discussed, and some diagnostic routines are presented.

Development of a structured sensory honey analysis: application to artisanal Madrid honeys.

PubMed

González, M M; de Lorenzo, C; Pérez, R A

2010-02-01

In this work a methodology to evaluate the sensory properties of honeys has been developed. The sensory analysis was carried out by means of a quantitative descriptive analysis (QDA) method, based on several reference scales, for the coverage of the designed range for each descriptor. The peculiarity of this sensory analysis is that the reference scales have been constituted by common foodstuffs agreed upon by consensus of the panel. The main sensory attributes evaluated in the analyses were: adhesiveness, viscosity, bitterness, aroma, sweetness, acidity, color and granularity. Both the intensity and persistence of honey aromas have also been estimated, together with the classification of the identified aromatic attributes into different groups. The method was applied to 55 artisanal honeys from Madrid (Spain) with the following results: (i) the developed sensory profile sheet allowed a satisfactory description of Madrid honeys; (ii) correlations between sensory attributes of three broad groups of Madrid honeys were obtained and (iii) aroma persistence, sweetness, bitterness, color and granularity appeared as the main sensorial characteristics of honey with discrimination power between floral and honeydew honeys.

Aerospace Toolbox---a flight vehicle design, analysis, simulation ,and software development environment: I. An introduction and tutorial

NASA Astrophysics Data System (ADS)

Christian, Paul M.; Wells, Randy

2001-09-01

This paper presents a demonstrated approach to significantly reduce the cost and schedule of non real-time modeling and simulation, real-time HWIL simulation, and embedded code development. The tool and the methodology presented capitalize on a paradigm that has become a standard operating procedure in the automotive industry. The tool described is known as the Aerospace Toolbox, and it is based on the MathWorks Matlab/Simulink framework, which is a COTS application. Extrapolation of automotive industry data and initial applications in the aerospace industry show that the use of the Aerospace Toolbox can make significant contributions in the quest by NASA and other government agencies to meet aggressive cost reduction goals in development programs. The part I of this paper provides a detailed description of the GUI based Aerospace Toolbox and how it is used in every step of a development program; from quick prototyping of concept developments that leverage built-in point of departure simulations through to detailed design, analysis, and testing. Some of the attributes addressed include its versatility in modeling 3 to 6 degrees of freedom, its library of flight test validated library of models (including physics, environments, hardware, and error sources), and its built-in Monte Carlo capability. Other topics to be covered in this part include flight vehicle models and algorithms, and the covariance analysis package, Navigation System Covariance Analysis Tools (NavSCAT). Part II of this paper, to be published at a later date, will conclude with a description of how the Aerospace Toolbox is an integral part of developing embedded code directly from the simulation models by using the Mathworks Real Time Workshop and optimization tools. It will also address how the Toolbox can be used as a design hub for Internet based collaborative engineering tools such as NASA's Intelligent Synthesis Environment (ISE) and Lockheed Martin's Interactive Missile Design Environment (IMD).

"In Our Corner": A Qualitative Descriptive Study of Patient Engagement in a Community-Based Care Coordination Program.

PubMed

Sefcik, Justine S; Petrovsky, Darina; Streur, Megan; Toles, Mark; O'Connor, Melissa; Ulrich, Connie M; Marcantonio, Sherry; Coburn, Ken; Naylor, Mary D; Moriarty, Helene

2018-03-01

The purpose of this study was to explore participants' experience in the Health Quality Partners (HQP) Care Coordination Program that contributed to their continued engagement. Older adults with multiple chronic conditions often have limited engagement in health care services and face fragmented health care delivery. This can lead to increased risk for disability, mortality, poor quality of life, and increased health care utilization. A qualitative descriptive design with two focus groups was conducted with a total of 20 older adults enrolled in HQP's Care Coordination Program. Conventional content analysis was the analytical technique. The overarching theme resulting from the analysis was "in our corner," with subthemes "opportunities to learn and socialize" and "dedicated nurses," suggesting that these are the primary contributing factors to engagement in HQP's Care Coordination Program. Study findings suggest that nurses play an integral role in patient engagement among older adults enrolled in a care coordination program.

MECDAS: A distributed data acquisition system for experiments at MAMI

NASA Astrophysics Data System (ADS)

Krygier, K. W.; Merle, K.

1994-02-01

For the coincidence experiments with the three spectrometer setup at MAMI an experiment control and data acquisition system has been built and was put successfully into final operation in 1992. MECDAS is designed as a distributed system using communication via Ethernet and optical links. As the front end, VME bus systems are used for real time purposes and direct hardware access via CAMAC, Fastbus or VMEbus. RISC workstations running UNIX are used for monitoring, data archiving and online and offline analysis of the experiment. MECDAS consists of several fixed programs and libraries, but large parts of readout and analysis can be configured by the user. Experiment specific configuration files are used to generate efficient and powerful code well adapted to special problems without additional programming. The experiment description is added to the raw collection of partially analyzed data to get self-descriptive data files.

Computer Administering of the Psychological Investigations: Set-Relational Representation

NASA Astrophysics Data System (ADS)

Yordzhev, Krasimir

Computer administering of a psychological investigation is the computer representation of the entire procedure of psychological assessments - test construction, test implementation, results evaluation, storage and maintenance of the developed database, its statistical processing, analysis and interpretation. A mathematical description of psychological assessment with the aid of personality tests is discussed in this article. The set theory and the relational algebra are used in this description. A relational model of data, needed to design a computer system for automation of certain psychological assessments is given. Some finite sets and relation on them, which are necessary for creating a personality psychological test, are described. The described model could be used to develop real software for computer administering of any psychological test and there is full automation of the whole process: test construction, test implementation, result evaluation, storage of the developed database, statistical implementation, analysis and interpretation. A software project for computer administering personality psychological tests is suggested.

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... must— (1) Provide substantiating data and necessary descriptive data for inclusion in the type design... is made unless the applicant identifies in the necessary descriptive data for inclusion in the type... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Approval of major changes in type design...

Solar heating and hot water system installed at Charlotte Memorial Hospital, Charlotte, North Carolina

NASA Technical Reports Server (NTRS)

1981-01-01

Detailed information regarding the design and installation of a heating and hot water system in a commercial application is given. This information includes descriptions of system and building, design philosophy, control logic operation modes, design and installation drawing and a brief description of problems encountered and their solutions.

Design and Development of a Chemistry Subject Portal at Panjab University Library, India

ERIC Educational Resources Information Center

Singh, Neeraj Kumar; Mahajan, Preeti

2010-01-01

Purpose: This paper aims to give a brief description of some chemistry portals available worldwide, followed by a description of the chemistry portal developed for Panjab University Library, Chandigarh (India). Design/methodology/approach: A well-structured chemistry portal was designed for chemistry and its allied departments at Panjab University…

Basic School Teachers' Perceptions about Curriculum Design in Ghana

ERIC Educational Resources Information Center

Abudu, Amadu Musah; Mensah, Mary Afi

2016-01-01

This study focused on teachers' perceptions about curriculum design and barriers to their participation. The sample size was 130 teachers who responded to a questionnaire. The analyses made use of descriptive statistics and descriptions. The study found that the level of teachers' participation in curriculum design is low. The results further…

Optimization of Systems with Uncertainty: Initial Developments for Performance, Robustness and Reliability Based Designs

NASA Technical Reports Server (NTRS)

Crespo, Luis G.; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

This paper presents a study on the optimization of systems with structured uncertainties, whose inputs and outputs can be exhaustively described in the probabilistic sense. By propagating the uncertainty from the input to the output in the space of the probability density functions and the moments, optimization problems that pursue performance, robustness and reliability based designs are studied. Be specifying the desired outputs in terms of desired probability density functions and then in terms of meaningful probabilistic indices, we settle a computationally viable framework for solving practical optimization problems. Applications to static optimization and stability control are used to illustrate the relevance of incorporating uncertainty in the early stages of the design. Several examples that admit a full probabilistic description of the output in terms of the design variables and the uncertain inputs are used to elucidate the main features of the generic problem and its solution. Extensions to problems that do not admit closed form solutions are also evaluated. Concrete evidence of the importance of using a consistent probabilistic formulation of the optimization problem and a meaningful probabilistic description of its solution is provided in the examples. In the stability control problem the analysis shows that standard deterministic approaches lead to designs with high probability of running into instability. The implementation of such designs can indeed have catastrophic consequences.

Experiences of adolescents living with cancer: A descriptive qualitative study.

PubMed

Ang, Sin Hui; Koh, Serena Siew Lin; Lee, Xiu Hua Hideka Tamamura; Shorey, Shefaly

2018-01-01

This study aimed to explore the experiences of adolescents from Singapore, aged 10-18 years old, living with cancer and their perceptions on how their psychosocial outcomes can be improved. A descriptive qualitative study design was used. Convenience sampling was used to recruit 10 participants from a pediatric oncology ward in a Singapore hospital. Individual semi-structured interviews were conducted. Thematic analysis was used to analyze the data. Five major themes emerged: (1) experience of physical symptoms, (2) emotional response to their condition, (3) changes in social dynamics, and (4) falling behind in academics. The psychosocial outcomes of Singaporean adolescents with cancer could be improved by thorough pain assessments and creating a more conducive hospital environment.

Description, characteristics and testing of the NASA airborne radar

NASA Technical Reports Server (NTRS)

Jones, W. R.; Altiz, O.; Schaffner, P.; Schrader, J. H.; Blume, H. J. C.

1991-01-01

Presented here is a description of a coherent radar scattermeter and its associated signal processing hardware, which have been specifically designed to detect microbursts and record their radar characteristics. Radar parameters, signal processing techniques and detection algorithms, all under computer control, combine to sense and process reflectivity, clutter, and microburst data. Also presented is the system's high density, high data rate recording system. This digital system is capable of recording many minutes of the in-phase and quadrature components and corresponding receiver gains of the scattered returns for selected spatial regions, as well as other aircraft and hardware related parameters of interest for post-flight analysis. Information is given in viewgraph form.

Functional description of the FAA's Aviation Environmental Design Tool's aircraft acoustics module

DOT National Transportation Integrated Search

2008-07-28

This paper presents architectural and functional descriptions of the Aircraft Acoustics Module : (AAM) in the Federal Aviation Administrations Aviation Environmental Design Tool (AEDT) : for modeling aircraft noise in the vicinity of airports. Whi...

Forest landscape description and inventories - a basis for landplanning and design

Treesearch

R. Burton Litton

1968-01-01

Describes six analytical factors and seven compositional types useful in recognition and description of scenic resources. Illustrates their application in two inventories made to aid managers and landscape architects in planning and design.

Land use classification in Bolivia

NASA Technical Reports Server (NTRS)

Brockmann, C. E.; Brooner, W. G.

1975-01-01

The Bolivian LANDSAT Program is an integrated, multidisciplinary project designed to provide thematic analysis of LANDSAT, Skylab, and other remotely sensed data for natural resource management and development in Bolivia, is discussed. Among the first requirements in the program is the development of a legend, and appropriate methodologies, for the analysis and classification of present land use based on landscape cover. The land use legend for Bolivia consists of approximately 80 categories in a hierarchical organization which may be collapsed for generalization, or expanded for greater detail. The categories, and their definitions, provide for both a graphic and textual description of the complex and diverse landscapes found in Bolivia, and are designed for analysis from LANDSAT and other remotely sensed data at scales of 1:1,000,000 and 1:250,000. Procedures and example products developed are described and illustrated, for the systematic analysis and mapping of present land use for all of Bolivia.

The Missing Treatment Design Element: Continuity of Treatment When Multiple Postobservations Are Used in Time-Series and Repeated Measures Study Designs

ERIC Educational Resources Information Center

Barnette, J. Jackson; Wallis, Anne Baber

2005-01-01

We rely a great deal on the schematic descriptions that represent experimental and quasi-experimental design arrangements, as well as the discussions of threats to validity associated with these, provided by Campbell and his associates: Stanley, Cook, and Shadish. Some of these designs include descriptions of treatments removed, removed and then…

Recuperators for compressed-air energy storage plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakhamkin, M.

1989-12-01

An R D study was conducted to provide an engineering solution to the potential problem of corrosion in the cold-end sections of recuperators operating in compressed-air energy storage (CAES) plants. Two options were developed: (1) a conventional, counterflow recuperator with an easily replaceable cold-end section and (2) a recuperator design which eliminates operation at tube temperatures below the exhaust-gas dew point (advanced design). The advanced design consists of an optimized combination of counterflow and parallel-flow sections. The following data resulting from these studies are included: a history of recuperator operating experience, a summary of lab-testing of various materials for corrosionmore » resistance, detailed design and descriptions of the recuperator designs, additional detail descriptions of alternative air-preheating and turboexpander-exhaust systems, and a comparative economic analysis of the various designs developed. The study concluded that for use with No. 2 fuel oil or lower-grade fuels, the advanced recuperator design with carbon-steel tubes and fins would be more cost-effective and trouble-free than one with an easily replaceable tube section. For CAES plants firing very low-sulfur fuel oil or natural gas, the lower capital-cost, counter-flow design can be considered. It was also concluded that a compressed-air bypass of the recuperator be included in the plant design in the event of recuperator outage, and that the recuperator be designed for operation without cavern air going through it. The advanced recuperator concept is currently being implemented at the 110-MW CAES plant for the Alabama Electric Cooperative, Inc. 6 refs., 24 figs., 20 tabs.« less

[Information and communication on the electromagnetic fields: analysis of the Italian Internet sites].

PubMed

Bedini, A; Giliberti, C; Salerno, S

2008-01-01

The aim of this study is to evaluate the presence of contents related to communication and information on the exposure to the electromagnetic fields (emf) in the first 100 Italian Internet sites, carried out using the search engine Google with the key words "emf" and "emf and health". Each Internet site has been evaluated using 10 selected indicators: (1) Definition of electric, magnetic and electromagnetic fields; (2) Description of the physical effects of the emf; (3) Description of biological and health effects of the emf; (4) Description of the environmental sources; (5) Description of the environmental levels produced by the different sources; (6) Main legislation; (7) Risk perception; (8) Frequently asked questions (FAQ); (9) Links; (10) Forum for discussion. The sites, obtained for each search, have been classified into 6 main categories: (1) Public Research Institutes; (2) Health and Environmental Authorities; (3) Local Authorities; (4) Associations; (5) Commercial sites; (6) Other. The results show lack of information and communication on the emf in the analysed Italian Internet sites. A need for a design of any scientific Internet information and communication on this topic is shown.

Solar energy system economic evaluation: Fern Tunkhannock, Tunkhannock, Pennsylvania

NASA Astrophysics Data System (ADS)

1980-09-01

The economic performance of an Operational Test Site (OTS) is described. The long term economic performance of the system at its installation site and extrapolation to four additional selected locations to demonstrate the viability of the design over a broad range of environmental and economic conditions is reported. Topics discussed are: system description, study approach, economic analysis and system optimization, and technical and economical results of analysis. Data for the economic analysis are generated through evaluation of the OTS. The simulation is based on the technical results of the seasonal report simulation. In addition localized and standard economic parameters are used for economic analysis.

Solar energy system economic evaluation: Fern Tunkhannock, Tunkhannock, Pennsylvania

NASA Technical Reports Server (NTRS)

1980-01-01

The economic performance of an Operational Test Site (OTS) is described. The long term economic performance of the system at its installation site and extrapolation to four additional selected locations to demonstrate the viability of the design over a broad range of environmental and economic conditions is reported. Topics discussed are: system description, study approach, economic analysis and system optimization, and technical and economical results of analysis. Data for the economic analysis are generated through evaluation of the OTS. The simulation is based on the technical results of the seasonal report simulation. In addition localized and standard economic parameters are used for economic analysis.

A laboratory study of nonlinear changes in the directionality of extreme seas

NASA Astrophysics Data System (ADS)

Latheef, M.; Swan, C.; Spinneken, J.

2017-03-01

This paper concerns the description of surface water waves, specifically nonlinear changes in the directionality. Supporting calculations are provided to establish the best method of directional wave generation, the preferred method of directional analysis and the inputs on which such a method should be based. These calculations show that a random directional method, in which the phasing, amplitude and direction of propagation of individual wave components are chosen randomly, has benefits in achieving the required ergodicity. In terms of analysis procedures, the extended maximum entropy principle, with inputs based upon vector quantities, produces the best description of directionality. With laboratory data describing the water surface elevation and the two horizontal velocity components at a single point, several steep sea states are considered. The results confirm that, as the steepness of a sea state increases, the overall directionality of the sea state reduces. More importantly, it is also shown that the largest waves become less spread or more unidirectional than the sea state as a whole. This provides an important link to earlier descriptions of deterministic wave groups produced by frequency focusing, helps to explain recent field observations and has important practical implications for the design of marine structures and vessels.

Service-oriented model-encapsulation strategy for sharing and integrating heterogeneous geo-analysis models in an open web environment

NASA Astrophysics Data System (ADS)

Yue, Songshan; Chen, Min; Wen, Yongning; Lu, Guonian

2016-04-01

Earth environment is extremely complicated and constantly changing; thus, it is widely accepted that the use of a single geo-analysis model cannot accurately represent all details when solving complex geo-problems. Over several years of research, numerous geo-analysis models have been developed. However, a collaborative barrier between model providers and model users still exists. The development of cloud computing has provided a new and promising approach for sharing and integrating geo-analysis models across an open web environment. To share and integrate these heterogeneous models, encapsulation studies should be conducted that are aimed at shielding original execution differences to create services which can be reused in the web environment. Although some model service standards (such as Web Processing Service (WPS) and Geo Processing Workflow (GPW)) have been designed and developed to help researchers construct model services, various problems regarding model encapsulation remain. (1) The descriptions of geo-analysis models are complicated and typically require rich-text descriptions and case-study illustrations, which are difficult to fully represent within a single web request (such as the GetCapabilities and DescribeProcess operations in the WPS standard). (2) Although Web Service technologies can be used to publish model services, model users who want to use a geo-analysis model and copy the model service into another computer still encounter problems (e.g., they cannot access the model deployment dependencies information). This study presents a strategy for encapsulating geo-analysis models to reduce problems encountered when sharing models between model providers and model users and supports the tasks with different web service standards (e.g., the WPS standard). A description method for heterogeneous geo-analysis models is studied. Based on the model description information, the methods for encapsulating the model-execution program to model services and for describing model-service deployment information are also included in the proposed strategy. Hence, the model-description interface, model-execution interface and model-deployment interface are studied to help model providers and model users more easily share, reuse and integrate geo-analysis models in an open web environment. Finally, a prototype system is established, and the WPS standard is employed as an example to verify the capability and practicability of the model-encapsulation strategy. The results show that it is more convenient for modellers to share and integrate heterogeneous geo-analysis models in cloud computing platforms.

Data Model Performance in Data Warehousing

NASA Astrophysics Data System (ADS)

Rorimpandey, G. C.; Sangkop, F. I.; Rantung, V. P.; Zwart, J. P.; Liando, O. E. S.; Mewengkang, A.

2018-02-01

Data Warehouses have increasingly become important in organizations that have large amount of data. It is not a product but a part of a solution for the decision support system in those organizations. Data model is the starting point for designing and developing of data warehouses architectures. Thus, the data model needs stable interfaces and consistent for a longer period of time. The aim of this research is to know which data model in data warehousing has the best performance. The research method is descriptive analysis, which has 3 main tasks, such as data collection and organization, analysis of data and interpretation of data. The result of this research is discussed in a statistic analysis method, represents that there is no statistical difference among data models used in data warehousing. The organization can utilize four data model proposed when designing and developing data warehouse.

Study of Alternate Space Shuttle Concepts. Volume 2. Part 1: Concept Analysis and Definition

NASA Technical Reports Server (NTRS)

1971-01-01

Three different space shuttle systems have been defined and analyzed. The first is a stage-and-one-half system optimized to meet program requirements. The second is a two-stage, fully reusable system also designed to meet program requirements. The third is a convertible system which operates initially as a stage-and-one-half system and is subsequently converted to a two-stage, fully reusable system by reconfiguration of the orbiter vehicle and development of a booster vehicle. The design and performance of this third system must necessarily be compromised somewhat to facilitate the conversion. For each system, the applicable requirements, ground rules, and assumptions are defined. The characteristics of each system are listed and a detailed description and analysis of the system are presented. Finally, a cost analysis for the system is given.

Design study of beam position monitors for measuring second-order moments of charged particle beams

NASA Astrophysics Data System (ADS)

Yanagida, Kenichi; Suzuki, Shinsuke; Hanaki, Hirofumi

2012-01-01

This paper presents a theoretical investigation on the multipole moments of charged particle beams in two-dimensional polar coordinates. The theoretical description of multipole moments is based on a single-particle system that is expanded to a multiparticle system by superposition, i.e., summing over all single-particle results. This paper also presents an analysis and design method for a beam position monitor (BPM) that detects higher-order (multipole) moments of a charged particle beam. To calculate the electric fields, a numerical analysis based on the finite difference method was created and carried out. Validity of the numerical analysis was proven by comparing the numerical with the analytical results for a BPM with circular cross section. Six-electrode BPMs with circular and elliptical cross sections were designed for the SPring-8 linac. The results of the numerical calculations show that the second-order moment can be detected for beam sizes ≧420μm (circular) and ≧550μm (elliptical).

Description of sampling designs using a comprehensive data structure

Treesearch

John C. Byrne; Albert R. Stage

1988-01-01

Maintaining permanent plot data with different sampling designs over long periods within an organization, as well as sharing such information between organizations, requires that common standards be used. A data structure for the description of the sampling design within a stand is proposed. It is based on the definition of subpopulations of trees sampled, the rules...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsai, C. -Y.; Derbenev, Ya. S.; Douglas, D.

For a high-brightness electron beam with low energy and high bunch charge traversing a recirculation beamline, coherent synchrotron radiation and space charge effect may result in the microbunching instability (MBI). Both tracking simulation and Vlasov analysis for an early design of Circulator Cooler Ring for the Jefferson Lab Electron Ion Collider reveal significant MBI. It is envisioned these could be substantially suppressed by using a magnetized beam. In this work, we extend the existing Vlasov analysis, originally developed for a non-magnetized beam, to the description of transport of a magnetized beam including relevant collective effects. As a result, the newmore » formulation will be further employed to confirm prediction of microbunching suppression for a magnetized beam transport in a recirculating machine design.« less

Analysis of Parallelogram Mechanism used to Preserve Remote Center of Motion for Surgical Telemanipulator

NASA Astrophysics Data System (ADS)

Trochimczuk, R.

2017-02-01

This paper presents an analysis of a parallelogram mechanism commonly used to provide a kinematic remote center of motion in surgical telemanipulators. Selected types of parallel manipulator designs, encountered in commercial and laboratory-made designs described in the medical robotics literature, will serve as the research material. Among other things, computer simulations in the ANSYS 13.0 CAD/CAE software environment, employing the finite element method, will be used. The kinematics of the solution of manipulator with the parallelogram mechanism will be determined in order to provide a more complete description. These results will form the basis for the decision regarding the possibility of applying a parallelogram mechanism in an original prototype of a telemanipulator arm.

A Descriptive Analysis of the Perspectives of Neville High School's Teachers Regarding the School's Renovation.

ERIC Educational Resources Information Center

Dawson, Christella G. B.; Parker, D. Randall

It has been suggested since the early 80's that America's public schools are not meeting the needs of America's citizenry and that the schools are in need of repair. This paper describes a study conducted at Neville High School (Louisiana) in 1996-1997 and designed to examine the effects of facility renovation on faculty morale. Data collection…

Adoption of Preventive Measures and Attitudes toward the H1N1 Influenza Pandemic in Schools

ERIC Educational Resources Information Center

Pérez, Anna; Rodríguez, Tània; López, Maria José; Continente, Xavier; Nebot, Manel

2016-01-01

Background: This study describes the perceived impact of H1N1 influenza and the adoption of the recommended measures to address the pandemic in schools. Methods: A cross-sectional self-reported survey was conducted in 433 schools in Barcelona addressed to the school principal or the H1N1 influenza designated person. A descriptive analysis was…

Investigating the Promise of Mass-Customized Education: A Content Analysis Self-Reported Descriptions of Web 2.0-Learning-Tools Based on Multiple Intelligence Theory

ERIC Educational Resources Information Center

Folkestad, James E.; Anderson, Sharon K.

2009-01-01

Is the world "flat" or is the world "spiky"? Although leading authors and thinkers [Florida, 2005] struggle to find the perfect metaphor for describing our 21st century global ecosystem, there is agreement that the landscape is shifting. There is overwhelming agreement that our current education system was designed and…

Personal Health Risks Behaviour Profile among University Students in the South East Nigeria: Implication for Health Education

ERIC Educational Resources Information Center

Ilo, Cajetan I.; Onwunaka, Chinagorom; Nwimo, Ignatius O.

2015-01-01

This descriptive survey was carried out in order to determine the personal health risks behaviour profile among university students in the south east of Nigeria. A random sample of 900 students completed the questionnaire designed for the study. Out of this number 821, representing about 91.2% return rate, were used for data analysis. Means and…

Efficient Caption-Based Retrieval of Multimedia Information

DTIC Science & Technology

1993-10-09

in the design of transportable natural language interfaces. Artifcial Intelligence , 32 (1987), 173-243. - 13- (101 Jones, M. and Eisner, J. A...systems for multimedia data . They exploit captions on the data and perform natural-language processing of them and English retrieval requests. Some...content analysis of the data is also performed to obtain additional descriptive information. The key to getting this approach to work is sufficiently

Reconstructionist Analysis on the Relevance of Secondary School Learning Opportunities in Promoting National Cohesion among Students in Machakos Town Sub-County, Kenya

ERIC Educational Resources Information Center

Mwanzia, Ruth Mutunge; Mwangi, Simon Nyagah

2016-01-01

The study investigated the relevance of secondary school learning opportunities in promoting national cohesion. The study was based on the ideals and principles of a school curriculum as advocated by Brameld Theodore on reconstructionism philosophy. Descriptive survey research design was adopted for the study. A sample size of four hundred and…

Development of a weight/sizing design synthesis computer program. Volume 2: Program Description

NASA Technical Reports Server (NTRS)

Garrison, J. M.

1973-01-01

The program for the computerized analysis of weight estimation relationships for those elements of the space shuttle vehicle which contribute a significant portion of the inert weight is discussed. A listing of each module and subroutine of the program is presented. Included are a generalized flow chart describing the subroutine linkage of the complete program and detailed flow charts for each subprogram.

Review and Evaluation of Current Training Programs Found in Various Mining Environments. Final Report. Volume II, Analysis and Recommendations.

ERIC Educational Resources Information Center

Adkins, John; And Others

A project was designed to produce a broad description of current mining training programs and to evaluate their effectiveness with respect to reducing mine injuries. Aggregate training and injury data were used to evaluate the overall training effort at 300 mines as well as specific efforts in 12 categories of training course objectives. From such…

The Dean's Grant Projects: A Descriptive Analysis and Evaluation, 1980. Training Programs for Educators to Accommodate Handicapped Children in Regular Class Settings.

ERIC Educational Resources Information Center

Minnesota Univ., Minneapolis. National Support Systems Project.

The report analyzes the effectiveness of Dean's Grant projects (DGPs), federally funded programs designed to help prepare regular preservice educators to deal with mainstreamed handicapped students. Following a review of demographic data on the 112 DGPs, survey and questionnaire results are summarized in an examination of such aspects as DGP…

Spacecraft System Integration and Test: SSTI Lewis critical design audit

NASA Technical Reports Server (NTRS)

Brooks, R. P.; Cha, K. K.

1995-01-01

The Critical Design Audit package is the final detailed design package which provides a comprehensive description of the SSTI mission. This package includes the program overview, the system requirements, the science and applications activities, the ground segment development, the assembly, integration and test description, the payload and technology demonstrations, and the spacecraft bus subsystems. Publication and presentation of this document marks the final requirements and design freeze for SSTI.

Comprehension and retrieval of failure cases in airborne observatories

NASA Technical Reports Server (NTRS)

Alvarado, Sergio J.; Mock, Kenrick J.

1995-01-01

This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

Comprehension and retrieval of failure cases in airborne observatories

NASA Astrophysics Data System (ADS)

Alvarado, Sergio J.; Mock, Kenrick J.

1995-05-01

This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

Digital systems design language

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1979-01-01

Digital Systems Design Language (DDL) is implemented on the SEL-32 Computer Systems. The detaileds of the language, the translator, and the simulator, and the smulator programs are given. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

Design, fabrication, test, qualification and price analysis for third generation design solar cell modules

NASA Technical Reports Server (NTRS)

1980-01-01

An updated program plan is presented showing the task descriptions depicting the work, progress, achievements, and the cause of any deviations from the original plan (SC-1), and how this impacted on the original schedule of the program. In addition there is an update documenting all design alterations made during the pre-production phase and a complete up to date set of engineering and manufacturing documentation (CM-1). The purpose of the work in the original plan was to explore, design, develop, test, and deliver 1000 watts of prototype flat plate, photovoltaic modules appropriate for use in applications in the 20 to 500 kilowatt range and which show potential for meeting the 1986 cost goals.

Energy utilization: municipal waste incineration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaBeck, M.F.

An assessment is made of the technical and economical feasibility of converting municipal waste into useful and useable energy. The concept presented involves retrofitting an existing municipal incinerator with the systems and equipment necessary to produce process steam and electric power. The concept is economically attractive since the cost of necessary waste heat recovery equipment is usually a comparatively small percentage of the cost of the original incinerator installation. Technical data obtained from presently operating incinerators designed specifically for generating energy, documents the technical feasibility and stipulates certain design constraints. The investigation includes a cost summary; description of process andmore » facilities; conceptual design; economic analysis; derivation of costs; itemized estimated costs; design and construction schedule; and some drawings.« less

System analysis through bond graph modeling

NASA Astrophysics Data System (ADS)

McBride, Robert Thomas

2005-07-01

Modeling and simulation form an integral role in the engineering design process. An accurate mathematical description of a system provides the design engineer the flexibility to perform trade studies quickly and accurately to expedite the design process. Most often, the mathematical model of the system contains components of different engineering disciplines. A modeling methodology that can handle these types of systems might be used in an indirect fashion to extract added information from the model. This research examines the ability of a modeling methodology to provide added insight into system analysis and design. The modeling methodology used is bond graph modeling. An investigation into the creation of a bond graph model using the Lagrangian of the system is provided. Upon creation of the bond graph, system analysis is performed. To aid in the system analysis, an object-oriented approach to bond graph modeling is introduced. A framework is provided to simulate the bond graph directly. Through object-oriented simulation of a bond graph, the information contained within the bond graph can be exploited to create a measurement of system efficiency. A definition of system efficiency is given. This measurement of efficiency is used in the design of different controllers of varying architectures. Optimal control of a missile autopilot is discussed within the framework of the calculated system efficiency.

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

Global Sentry: NASA/USRA high altitude reconnaissance aircraft design, volume 2

NASA Technical Reports Server (NTRS)

Alexandru, Mona-Lisa; Martinez, Frank; Tsou, Jim; Do, Henry; Peters, Ashish; Chatsworth, Tom; Yu, YE; Dhillon, Jaskiran

1990-01-01

The Global Sentry is a high altitude reconnaissance aircraft design for the NASA/USRA design project. The Global Sentry uses proven technologies, light-weight composites, and meets the R.F.P. requirements. The mission requirements for the Global Sentry are described. The configuration option is discussed and a description of the final design is given. Preliminary sizing analyses and the mass properties of the design are presented. The aerodynamic features of the Global Sentry are described along with the stability and control characteristics designed into the flight control system. The performance characteristics are discussed as is the propulsion installation and system layout. The Global Sentry structural design is examined, including a wing structural analysis. The cockpit, controls and display layouts are covered. Manufacturing is covered and the life cost estimation. Reliability is discussed. Conclusions about the current Global Sentry design are presented, along with suggested areas for future engineering work.

Methodological reporting of randomized trials in five leading Chinese nursing journals.

PubMed

Shi, Chunhu; Tian, Jinhui; Ren, Dan; Wei, Hongli; Zhang, Lihuan; Wang, Quan; Yang, Kehu

2014-01-01

Randomized controlled trials (RCTs) are not always well reported, especially in terms of their methodological descriptions. This study aimed to investigate the adherence of methodological reporting complying with CONSORT and explore associated trial level variables in the Chinese nursing care field. In June 2012, we identified RCTs published in five leading Chinese nursing journals and included trials with details of randomized methods. The quality of methodological reporting was measured through the methods section of the CONSORT checklist and the overall CONSORT methodological items score was calculated and expressed as a percentage. Meanwhile, we hypothesized that some general and methodological characteristics were associated with reporting quality and conducted a regression with these data to explore the correlation. The descriptive and regression statistics were calculated via SPSS 13.0. In total, 680 RCTs were included. The overall CONSORT methodological items score was 6.34 ± 0.97 (Mean ± SD). No RCT reported descriptions and changes in "trial design," changes in "outcomes" and "implementation," or descriptions of the similarity of interventions for "blinding." Poor reporting was found in detailing the "settings of participants" (13.1%), "type of randomization sequence generation" (1.8%), calculation methods of "sample size" (0.4%), explanation of any interim analyses and stopping guidelines for "sample size" (0.3%), "allocation concealment mechanism" (0.3%), additional analyses in "statistical methods" (2.1%), and targeted subjects and methods of "blinding" (5.9%). More than 50% of trials described randomization sequence generation, the eligibility criteria of "participants," "interventions," and definitions of the "outcomes" and "statistical methods." The regression analysis found that publication year and ITT analysis were weakly associated with CONSORT score. The completeness of methodological reporting of RCTs in the Chinese nursing care field is poor, especially with regard to the reporting of trial design, changes in outcomes, sample size calculation, allocation concealment, blinding, and statistical methods.

Predicate Argument Structure Analysis for Use Case Description Modeling

NASA Astrophysics Data System (ADS)

Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.