Feedback Control Systems Loop Shaping Design with Practical Considerations

NASA Technical Reports Server (NTRS)

Kopsakis, George

2007-01-01

This paper describes loop shaping control design in feedback control systems, primarily from a practical stand point that considers design specifications. Classical feedback control design theory, for linear systems where the plant transfer function is known, has been around for a long time. But it s still a challenge of how to translate the theory into practical and methodical design techniques that simultaneously satisfy a variety of performance requirements such as transient response, stability, and disturbance attenuation while taking into account the capabilities of the plant and its actuation system. This paper briefly addresses some relevant theory, first in layman s terms, so that it becomes easily understood and then it embarks into a practical and systematic design approach incorporating loop shaping design coupled with lead-lag control compensation design. The emphasis is in generating simple but rather powerful design techniques that will allow even designers with a layman s knowledge in controls to develop effective feedback control designs.

An empirical study of software design practices

NASA Technical Reports Server (NTRS)

Card, David N.; Church, Victor E.; Agresti, William W.

1986-01-01

Software engineers have developed a large body of software design theory and folklore, much of which was never validated. The results of an empirical study of software design practices in one specific environment are presented. The practices examined affect module size, module strength, data coupling, descendant span, unreferenced variables, and software reuse. Measures characteristic of these practices were extracted from 887 FORTRAN modules developed for five flight dynamics software projects monitored by the Software Engineering Laboratory (SEL). The relationship of these measures to cost and fault rate was analyzed using a contingency table procedure. The results show that some recommended design practices, despite their intuitive appeal, are ineffective in this environment, whereas others are very effective.

Practical layer designs for polarizing beam-splitter cubes.

PubMed

von Blanckenhagen, Bernhard

2006-03-01

Liquid-crystal-on-silicon- (LCoS-) based digital projection systems require high-performance polarizing beam splitters. The classical beam-splitter cube with an immersed interference coating can fulfill these requirements. Practical layer designs can be generated by computer optimization using the classic MacNeille polarizer layer design as the starting layer design. Multilayer structures with 100 nm bandwidth covering the blue, green, or red spectral region and one design covering the whole visible spectral region are designed. In a second step these designs are realized by using plasma-ion-assisted deposition. The performance of the practical beam-splitter cubes is compared with the theoretical performance of the layer designs.

Design of a Performance-Responsive Drill and Practice Algorithm for Computer-Based Training.

ERIC Educational Resources Information Center

Vazquez-Abad, Jesus; LaFleur, Marc

1990-01-01

Reviews criticisms of the use of drill and practice programs in educational computing and describes potentials for its use in instruction. Topics discussed include guidelines for developing computer-based drill and practice; scripted training courseware; item format design; item bank design; and a performance-responsive algorithm for item…

75 FR 12815 - Endangered and Threatened Wildlife and Plants; Revised Designation of Critical Habitat for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... would outweigh the benefits of designation for the following reasons: (1) Routine grazing practices benefit the California red-legged frog, and designation would increase the liabilities on such practices... the 4(d) special rule includes an expanded definition of routine ranching practices and incorporates...

Making the Case for Practice-Based Research and the Imperative Role of Design Practitioners.

PubMed

Freihoefer, Kara; Zborowsky, Terri

2017-04-01

The purpose of this article is to justify the need for evidence-based design (EBD) in a research-based architecture and design practice. This article examines the current state of practice-based research (PBR), supports the need for EBD, illustrates PBR methods that can be applied to design work, and explores how findings can be used as a decision-making tool during design and as a validation tool during postoccupancy. As a result, design professions' body of knowledge will advance and practitioners will be better informed to protect the health, safety, and welfare of the society. Furthermore, characteristics of Friedman's progressive research program are used as a framework to examine the current state of PBR in design practice. A modified EBD approach is proposed and showcased with a case study of a renovated inpatient unit. The modified approach demonstrates how a highly integrated project team, especially the role of design practitioners, contributed to the success of utilizing baseline findings and evidence in decision-making throughout the design process. Lastly, recommendations and resources for learning research concepts are provided for practitioners. It is the role of practitioners to pave the way for the next generation of design professionals, as the request and expectation for research become more prevalent in design practice.

Designing a Technology Enhanced Practice for Home Nursing Care of Patients with Congestive Heart Failure

PubMed Central

Casper, Gail R.; Karsh, Ben-Tzion; K.L., Calvin; Carayon, Pascale; Grenier, Anne-Sophie; Sebern, Margaret; Burke, Laura J.; Brennan, Patricia F.

2005-01-01

This paper describes the process we used to design the HeartCare website to support Technology Enhanced Practice (TEP) for home care nurses engaged in providing care for patients with Congestive Heart Failure (CHF). Composed of communication, information, and self-monitoring functions, the HeartCare website is aimed at supporting best practice nursing care for these patients. Its unique focus is professional practice, thus the scope of this project is greater and more abstract than those focusing on a task or set of activities. A modified macroergonomic analysis, design work system analysis, and focus groups utilizing participatory design methodology were undertaken to characterize the nursing practice model. Design of the HeartCare website required synthesizing the extant practice model and the agency’s evidence-based heart failure protocols, identifying aspects of practice that could be enhanced by supporting technology, and delineation of functional requirements of the Enhanced HeartCare technology. Validation and refinement of the website and planning for user training activities will be accomplished through a two-stage usability testing strategy. PMID:16779013

Practical Techniques for Implementing True Experimental Designs.

ERIC Educational Resources Information Center

Powers, Donald E.; Alderman, Donald L.

1979-01-01

Practical methods for implementing true experimental designs in evaluation settings in which such designs are rarely used are presented. Particular attention is paid to educational settings. (Author/JKS)

Rethinking the architectural design concept in the digital culture (in architecture's practice perspective)

NASA Astrophysics Data System (ADS)

Prawata, Albertus Galih

2017-11-01

The architectural design stages in architectural practices or in architectural design studio consist of many aspects. One of them is during the early phases of the design process, where the architects or designers try to interpret the project brief into the design concept. This paper is a report of the procedure of digital tools in the early design process in an architectural practice in Jakarta. It targets principally the use of BIM and digital modeling to generate information and transform them into conceptual forms, which is not very common in Indonesian architectural practices. Traditionally, the project brief is transformed into conceptual forms by using sketches, drawings, and physical model. The new method using digital tools shows that it is possible to do the same thing during the initial stage of the design process to create early architectural design forms. Architect's traditional tools and methods begin to be replaced effectively by digital tools, which would drive bigger opportunities for innovation.

Personal Leadership in Practice: A Critical Approach to Instructional Design Innovation Work

ERIC Educational Resources Information Center

Ashbaugh, Marcia L.

2013-01-01

An argument is made in this article for a link between leadership and innovation, when innovation is an outcome of the work approaches and practices that underpin an educational technologist's academic course designs. The practice of instructional design (ID) is continually being challenged to rethink its conceptualization of academic course…

Design as a Social Practice: The Design of New Build Schools

ERIC Educational Resources Information Center

Daniels, Harry; Tse, Hau Ming; Stables, Andrew; Cox, Sarah

2017-01-01

In this paper we present the findings of an investigation into the ways in which the discourses and practices of school design produce educational spaces which influence the discourses and practices of teaching and learning when the building is occupied. It expands notions of post occupancy evaluation (POE) research by exploring how the…

Identifying Common Practice Elements to Improve Social, Emotional, and Behavioral Outcomes of Young Children in Early Childhood Classrooms.

PubMed

McLeod, Bryce D; Sutherland, Kevin S; Martinez, Ruben G; Conroy, Maureen A; Snyder, Patricia A; Southam-Gerow, Michael A

2017-02-01

Educators are increasingly being encouraged to implement evidence-based interventions and practices to address the social, emotional, and behavioral needs of young children who exhibit problem behavior in early childhood settings. Given the nature of social-emotional learning during the early childhood years and the lack of a common set of core evidence-based practices within the early childhood literature, selection of instructional practices that foster positive social, emotional, and behavioral outcomes for children in early childhood settings can be difficult. The purpose of this paper is to report findings from a study designed to identify common practice elements found in comprehensive intervention models (i.e., manualized interventions that include a number of components) or discrete practices (i.e., a specific behavior or action) designed to target social, emotional, and behavioral learning of young children who exhibit problem behavior. We conducted a systematic review of early childhood classroom interventions that had been evaluated in randomized group designs, quasi-experimental designs, and single-case experimental designs. A total of 49 published articles were identified, and an iterative process was used to identify common practice elements. The practice elements were subsequently reviewed by experts in social-emotional and behavioral interventions for young children. Twenty-four practice elements were identified and classified into content (the goal or general principle that guides a practice element) and delivery (the way in which a teacher provides instruction to the child) categories. We discuss implications that the identification of these practice elements found in the early childhood literature has for efforts to implement models and practices.

SNL Mechanical Computer Aided Design (MCAD) guide 2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

2007-12-01

This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

The Design of a Practical Enterprise Safety Management System

NASA Astrophysics Data System (ADS)

Gabbar, Hossam A.; Suzuki, Kazuhiko

This book presents design guidelines and implementation approaches for enterprise safety management system as integrated within enterprise integrated systems. It shows new model-based safety management where process design automation is integrated with enterprise business functions and components. It proposes new system engineering approach addressed to new generation chemical industry. It will help both the undergraduate and professional readers to build basic knowledge about issues and problems of designing practical enterprise safety management system, while presenting in clear way, the system and information engineering practices to design enterprise integrated solution.

Designing SoTL Studies--Part II: Practicality

ERIC Educational Resources Information Center

Bartsch, Robert A.

2013-01-01

This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

GCSE Assessment Notes.

ERIC Educational Resources Information Center

School Science Review, 1988

1988-01-01

Contains three articles designed to help practitioners with practical assessment for the GCSE. Articles include: "GCSE Biology Practical Assessment--Can the End Justify the Means?"; "Investigating the Effect of Catalase: GCSE Assessment Practical"; and "An Experimental Design for GCSE Physics." (CW)

Quasi-experimental designs in practice-based research settings: design and implementation considerations.

PubMed

Handley, Margaret A; Schillinger, Dean; Shiboski, Stephen

2011-01-01

Although randomized controlled trials are often a gold standard for determining intervention effects, in the area of practice-based research (PBR), there are many situations in which individual randomization is not possible. Alternative approaches to evaluating interventions have received increased attention, particularly those that can retain elements of randomization such that they can be considered "controlled" trials. Methodological design elements and practical implementation considerations for two quasi-experimental design approaches that have considerable promise in PBR settings--the stepped-wedge design, and a variant of this design, a wait-list cross-over design, are presented along with a case study from a recent PBR intervention for patients with diabetes. PBR-relevant design features include: creation of a cohort over time that collects control data but allows all participants (clusters or patients) to receive the intervention; staggered introduction of clusters; multiple data collection points; and one-way cross-over into the intervention arm. Practical considerations include: randomization versus stratification, training run in phases; and extended time period for overall study completion. Several design features of practice based research studies can be adapted to local circumstances yet retain elements to improve methodological rigor. Studies that utilize these methods, such as the stepped-wedge design and the wait-list cross-over design, can increase the evidence base for controlled studies conducted within the complex environment of PBR.

Iteration in Early-Elementary Engineering Design

NASA Astrophysics Data System (ADS)

McFarland Kendall, Amber Leigh

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect of engineering design, and because research at the college and professional level suggests iteration improves the designer's understanding of problems and the quality of design solutions. My research presents qualitative case studies of students in kindergarten and third-grade as they engage in classroom engineering design challenges which integrate with traditional curricula standards in mathematics, science, and literature. I discuss my results through the lens of activity theory, emphasizing practices, goals, and mediating resources. Through three chapters, I provide insight into how early-elementary students iterate upon their designs by characterizing the ways in which lesson design impacts testing and revision, by analyzing the plan-driven and experimentation-driven approaches that student groups use when solving engineering design challenges, and by investigating how students attend to constraints within the challenge. I connect these findings to teacher practices and curriculum design in order to suggest methods of promoting iteration within open-ended, classroom-based engineering design challenges. This dissertation contributes to the field of engineering education by providing evidence of productive engineering practices in young students and support for the value of engineering design challenges in developing students' participation and agency in these practices.

Representing Practice: Practice Models, Patterns, Bundles

ERIC Educational Resources Information Center

Falconer, Isobel; Finlay, Janet; Fincher, Sally

2011-01-01

This article critiques learning design as a representation for sharing and developing practice, based on synthesis of three projects. Starting with the findings of the Mod4L Models of Practice project, it argues that the technical origins of learning design, and the consequent focus on structure and sequence, limit its usefulness for sharing…

Facilitating Real-Time Observation of, and Peer Discussion and Feedback about, Practice in Writing Classrooms

ERIC Educational Resources Information Center

Parr, Judy M.; Hawe, Eleanor

2017-01-01

This study investigates conditions designed to optimize learning where professionals utilize the expertise and support of one another. It describes a research--practice collaboration to enhance teacher knowledge and practice through peer observation of, and feedback about, classroom practice in writing. A collaboratively designed observation…

Designing Research-Informed Resources for More Effective Practical Work

ERIC Educational Resources Information Center

Hall, Angela; Palmer, Emma

2015-01-01

The Nuffield Foundation's Practical Work for Learning project takes the position that practical work is not a pedagogic approach in its own right, but that its affordances for learning depend on how successfully other pedagogies are applied to practical lessons. The design process used in the project is made explicit, illustrating…

Reshaping the Boundaries of Community Engagement in Design Education: Global and Local Explorations

ERIC Educational Resources Information Center

Hicks, Travis L.; Radtke, Rebekah Ison

2015-01-01

Community-driven design is a current movement in the forefront of many designers' practices and on university campuses in design programs. The authors examine work from their respective public state universities' design programs as examples of best practices. In these case studies, the authors share experiences using community-based design…

Design, Desire, and Difference

ERIC Educational Resources Information Center

Leander, Kevin M.; Boldt, Gail

2018-01-01

In response to the rise in popularity of concepts of "design" in education research, pedagogy, and curriculum design, in this article we consider how the New London Group conceived of the role of student design practices as an outcome of pedagogy, as well as the parallel role of design in teaching practices. In this descriptive analysis,…

Collaborative Design Practices in Technology Mediated Learning

ERIC Educational Resources Information Center

Seitamaa-Hakkarainen, Pirita; Kangas, Kaiju; Raunio, Anna-Mari; Hakkarainen, Kai

2012-01-01

The present article examines how practices of computer-supported collaborative designing may be implemented in an elementary classroom. We present a case study in which 12-year-old students engaged in architectural design under the guidance of their teacher and a professional designer. The students were engaged in all aspects of design processes,…

A practice course to cultivate students' comprehensive ability of photoelectricity

NASA Astrophysics Data System (ADS)

Lv, Yong; Liu, Yang; Niu, Chunhui; Liu, Lishuang

2017-08-01

After the studying of many theoretical courses, it's important and urgent for the students from specialty of optoelectronic information science and engineering to cultivate their comprehensive ability of photoelectricity. We set up a comprehensive practice course named "Integrated Design of Optoelectronic Information System" (IDOIS) for the purpose that students can integrate their knowledge of optics, electronics and computer programming to design, install and debug an optoelectronic system with independent functions. Eight years of practice shows that this practice course can train students' ability of analysis, design/development and debugging of photoelectric system, improve their ability in document retrieval, design proposal and summary report writing, teamwork, innovation consciousness and skill.

Reducing Printed Circuit Board Emissions with Low-Noise Design Practices

NASA Technical Reports Server (NTRS)

Bradley, Arthur T.; Fowler, Jennifer; Yavoich, Brian J.; Jennings, Stephen A.

2012-01-01

This paper presents the results of an experiment designed to determine the effectiveness of adopting several low-noise printed circuit board (PCB) design practices. Two boards were designed and fabricated, each consisting of identical mixed signal circuitry. Several important differences were introduced between the board layouts: one board was constructed using recommended low-noise practices and the other constructed without such attention. The emissions from the two boards were then measured and compared, demonstrating an improvement in radiated emissions of up to 22 dB.

The Emergence of Dominant Design(s) in Large Scale Cyber-Infrastructure Systems

ERIC Educational Resources Information Center

Diamanti, Eirini Ilana

2012-01-01

Cyber-infrastructure systems are integrated large-scale IT systems designed with the goal of transforming scientific practice by enabling multi-disciplinary, cross-institutional collaboration. Their large scale and socio-technical complexity make design decisions for their underlying architecture practically irreversible. Drawing on three…

Designing and Piloting a Leadership Daily Practice Log: Using Logs to Study the Practice of Leadership

ERIC Educational Resources Information Center

Spillane, James P.; Zuberi, Anita

2009-01-01

Purpose: This article aims to validate the Leadership Daily Practice (LDP) log, an instrument for conducting research on leadership in schools. Research Design: Using a combination of data sources--namely, a daily practice log, observations, and open-ended cognitive interviews--the authors evaluate the validity of the LDP log. Participants: Formal…

Designing a Large-Scale Multilevel Improvement Initiative: The Improving Performance in Practice Program

ERIC Educational Resources Information Center

Margolis, Peter A.; DeWalt, Darren A.; Simon, Janet E.; Horowitz, Sheldon; Scoville, Richard; Kahn, Norman; Perelman, Robert; Bagley, Bruce; Miles, Paul

2010-01-01

Improving Performance in Practice (IPIP) is a large system intervention designed to align efforts and motivate the creation of a tiered system of improvement at the national, state, practice, and patient levels, assisting primary-care physicians and their practice teams to assess and measurably improve the quality of care for chronic illness and…

Practicing Design Judgement through Intention-Focused Course Curricula

ERIC Educational Resources Information Center

Fernaeus, Ylva; Lundström, Anders

2015-01-01

This paper elaborates on how design judgement can be practiced in design education, as explored in several iterations of an advanced course in interaction design. The students were probed to address four separate design tasks based on distinct high-level intentions, i.e. to 1) take societal responsibility, 2) to generate profit, 3) to explore a…

Researching Design Practices and Design Cognition: Contexts, Experiences and Pedagogical Knowledge-in-Pieces

ERIC Educational Resources Information Center

Kali, Yael; Goodyear, Peter; Markauskaite, Lina

2011-01-01

If research and development in the field of learning design is to have a serious and sustained impact on education, then technological innovation needs to be accompanied--and probably guided--by good empirical studies of the design practices and design thinking of those who develop these innovations. This article synthesises two related lines of…

Some Big Questions about Design in Educational Technology

ERIC Educational Resources Information Center

Gibbons, Andrew S.

2016-01-01

This article asks five questions that lead us to the foundations of design practice in educational technology. Design processes structure time, space, place, activity, role, goal, and resource. For educational technology to advance in its understanding of design practice, it must question whether we have clear conceptions of how abstract…

Learners' Perceptions of Instructional Design Practice in a Situated Learning Activity

ERIC Educational Resources Information Center

Woolf, Nicholas; Quinn, James

2009-01-01

This case study investigated learners' perceptions of value from participating in a learning activity designed to model professional instructional design practice. Learners developed instructional design products for a corporate client in the context of a classroom-based course. The findings indicate that learners perceived different kinds of…

Design Approaches in Training and Education: Insights from Practice.

ERIC Educational Resources Information Center

Visscher, Irene; Schulten, Ellen

The issue of educational design was central in a study conducted at the University of Twente (The Netherlands). The goal was to describe the strategies that well-known designers in various education and training practices use. Twenty-three designers from different educational sectors (textbooks, curricula, educational media, etc.) were…

Teaching practice and effect of the curriculum design and simulation courses under the support of professional optical software

NASA Astrophysics Data System (ADS)

Lin, YuanFang; Zheng, XiaoDong; Huang, YuJia

2017-08-01

Curriculum design and simulation courses are bridges to connect specialty theories, engineering practice and experimental skills. In order to help students to have the computer aided optical system design ability adapting to developments of the times, a professional optical software-Advanced System of Analysis Program (ASAP) was used in the research teaching of curriculum design and simulation courses. The ASAP tutorials conducting, exercises both complementing and supplementing the lectures, hands-on practice in class, autonomous learning and independent design after class were bridged organically, to guide students "learning while doing, learning by doing", paying more attention to the process instead of the results. Several years of teaching practice of curriculum design and simulation courses shows that, project-based learning meets society needs of training personnel with knowledge, ability and quality. Students have obtained not only skills of using professional software, but also skills of finding and proposing questions in engineering practice, the scientific method of analyzing and solving questions with specialty knowledge, in addition, autonomous learning ability, teamwork spirit and innovation consciousness, still scientific attitude of facing failure and scientific spirit of admitting deficiency in the process of independent design and exploration.

Toward an horizon in design ethics.

PubMed

d'Anjou, Philippe

2010-06-01

This paper suggests that design ethics can be enriched by considering ethics beyond the traditional approaches of deontology, teleology, and virtue ethics. Design practice and design ethics literature tend to frame ethics in design according to these approaches. The paper argues that a fundamental and concrete ethical understanding of design ethics can also be found in Sartrean Existentialism, a philosophy centered on the individual and his/her absolute freedom. Through the analysis of four core concepts of Sartrean Existentialism that define a specific ethics, the paper illustrates why such philosophical approach is relevant to design ethics. The paper also shows how Sartrean Existentialism and its ethics apply to critical issues of professional practice in design such as professional engagement and design decision-making. The paper finally argues that Sartre's philosophy and ethics is a perspective that offers the designer in design practice a solid ground to engage his/her ethical dilemma.

Assessing cost-effectiveness of specific LID practice designs in response to large storm events

NASA Astrophysics Data System (ADS)

Chui, Ting Fong May; Liu, Xin; Zhan, Wenting

2016-02-01

Low impact development (LID) practices have become more important in urban stormwater management worldwide. However, most research on design optimization focuses on relatively large scale, and there is very limited information or guideline regarding individual LID practice designs (i.e., optimal depth, width and length). The objective of this study is to identify the optimal design by assessing the hydrological performance and the cost-effectiveness of different designs of LID practices at a household or business scale, and to analyze the sensitivity of the hydrological performance and the cost of the optimal design to different model and design parameters. First, EPA SWMM, automatically controlled by MATLAB, is used to obtain the peak runoff of different designs of three specific LID practices (i.e., green roof, bioretention and porous pavement) under different design storms (i.e., 2 yr and 50 yr design storms of Hong Kong, China and Seattle, U.S.). Then, life cycle cost is estimated for the different designs, and the optimal design, defined as the design with the lowest cost and at least 20% peak runoff reduction, is identified. Finally, sensitivity of the optimal design to the different design parameters is examined. The optimal design of green roof tends to be larger in area but thinner, while the optimal designs of bioretention and porous pavement tend to be smaller in area. To handle larger storms, however, it is more effective to increase the green roof depth, and to increase the area of the bioretention and porous pavement. Porous pavement is the most cost-effective for peak flow reduction, followed by bioretention and then green roof. The cost-effectiveness, measured as the peak runoff reduction/thousand Dollars of LID practices in Hong Kong (e.g., 0.02 L/103 US s, 0.15 L/103 US s and 0.93 L/103 US s for green roof, bioretention and porous pavement for 2 yr storm) is lower than that in Seattle (e.g., 0.03 L/103 US s, 0.29 L/103 US s and 1.58 L/103 US s for green roof, bioretention and porous pavement for 2 yr storm). The optimal designs are influenced by the model and design parameters (i.e., initial saturation, hydraulic conductivity and berm height). However, it overall does not affect the main trends and key insights derived, and the results are therefore generic and relevant to the household/business-scale optimal design of LID practices worldwide.

NASA preferred reliability-practices for design and test

NASA Technical Reports Server (NTRS)

Lisk, Ronald C.

1992-01-01

NASA HQ established the NASA R&M Steering Committee (R&MSC) comprised of membership from each NASA field center. The primary charter of the R&MSC is to obtain, record, and share the best design practices that NASA has applied to successful space flight programs and current design considerations (guidelines) that should enhance flight reliability on emerging programs. The practices and guidelines are being assembled in a living document for distribution to NASA centers and the aerospace community. The document will be updated annually with additional practices and guidelines as contributions from the centers are reviewed and approved by the R&MSC. Practices and guidelines are not requirements, but rather a means of sharing procedures and techniques that a given center and the R&MSC together feel have strong technical merit and application to the design of space-related equipment.

Geometric design practices for European roads

DOT National Transportation Integrated Search

2001-06-01

The objective of the scanning tour was to review and document European procedures and practices in roadway geometric design and context-sensitive design, in which a balance is sought between safety and mobility needs and community interests. The U.S....

Experiences of Practice-Based Learning in Phenomenographic Perspective

ERIC Educational Resources Information Center

Rovio-Johansson, Airi

2018-01-01

Purpose: The paper aims to examine, within the context of professional practice and learning, how designers collaboratively working in international teams experience practice-based learning and how such occasions contribute to professional development. Design/methodology/approach: The paper introduces the cooperation project between Tibro Training…

Lighting Control Best Practice Guide: Schools.

ERIC Educational Resources Information Center

2002

This publication offers design, specification, and installation guidance for lighting control appropriate for K-12 educational facilities. It features applications that illustrate the best control practices for a variety of spaces, facilitating lighting control design and application. Each best practice meets the provisions of relevant energy…

17 CFR 38.152 - Abusive trading practices prohibited.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Abusive trading practices prohibited. 38.152 Section 38.152 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DESIGNATED CONTRACT MARKETS Compliance With Rules § 38.152 Abusive trading practices prohibited. A designated...

17 CFR 38.152 - Abusive trading practices prohibited.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Abusive trading practices prohibited. 38.152 Section 38.152 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DESIGNATED CONTRACT MARKETS Compliance With Rules § 38.152 Abusive trading practices prohibited. A designated...

Temporary practice pause then resumption (TPPR) study design: an extension of the withdrawal study design to complementary and alternative medicine mind and body interventions (CAM-MABI).

PubMed

Braun, M Miles

2013-10-01

Study of complementary and alternative medicine's mind and body interventions (CAM-MABI) is hindered not only by the inability to mask participants and their teachers to the study intervention but also by the major practical hurdles of long-term study of practices that can be lifelong. Two other important methodological problems are that study of newly trained practitioners cannot directly address long-term practice, and that long-term practitioners likely self-select in ways that make finding appropriate controls (or a comparison group) challenging. The temporary practice pause then resumption study design (TPPR) introduced here is a new tool that extends the withdrawal study design, established in the field of drug evaluation, to the field of CAM-MABI. With the exception of the inability to mask, TPPR can address the other methodological problems noted above. Of great interest to investigators will likely be measures in practitioners of CAM-MABI that change with temporary pausing of CAM-MABI practice, followed by return of the measures to pre-pause levels with resumption of practice; this would suggest a link of the practice to measured changes. Such findings using this tool may enhance our insight into fundamental biological processes, leading to beneficial practical applications.

Strategies for Success: Uncovering What Makes Students Successful in Design and Learning

ERIC Educational Resources Information Center

Apedoe, Xornam S.; Schunn, Christian D.

2013-01-01

While the purposes of design and science are often different, they share some key practices and processes. Design-based science learning, which combines the processes of engineering design with scientific inquiry, is one attempt to engage students in scientific reasoning via solving practical problems. Although research suggests that engaging…

Design in Practice: Scenarios for Improving Management Education

ERIC Educational Resources Information Center

Schlenker, Lee; Chantelot, Sébastien

2014-01-01

Despite the increasing attention given to design in business, Design Thinking has had little impact on the quality of business school education. Building upon the foundations of long-standing critiques of management education and the potential for student-centric learning, the authors propose that the use of Design in Practice can significantly…

Designing and Conducting Strong Quasi-Experiments in Education. Version 2

ERIC Educational Resources Information Center

Scher, Lauren; Kisker, Ellen; Dynarski, Mark

2015-01-01

The purpose of this paper is to describe best practices in designing and implementing strong quasi-experimental designs (QED) when assessing the effectiveness of policies, programs or practices. The paper first discusses the issues researchers face when choosing to conduct a QED, as opposed to a more rigorous randomized controlled trial design.…

Design and Development of a Learning Design Virtual Internship Program

ERIC Educational Resources Information Center

Ruggiero, Dana; Boehm, Jeff

2016-01-01

Incorporation of practical experience in learning design and technology education has long been accepted as an important step in the developmental process of future learning designers. The proliferation of adult online education has increased the number of graduate students who are in need of a practical internship placement but have limited…

Visual Communication Design as a Form of Public Pedagogy

ERIC Educational Resources Information Center

Kelly, Meghan

2015-01-01

This paper identifies visual communication design as a form of public pedagogy. Communication design practices aim to achieve the successful transmission of a message to a recipient in a visual mode. Understanding the theories and practices of visual communication design can assist in enhancing the reception of the communication, as these…

User-centered design to improve clinical decision support in primary care.

PubMed

Brunner, Julian; Chuang, Emmeline; Goldzweig, Caroline; Cain, Cindy L; Sugar, Catherine; Yano, Elizabeth M

2017-08-01

A growing literature has demonstrated the ability of user-centered design to make clinical decision support systems more effective and easier to use. However, studies of user-centered design have rarely examined more than a handful of sites at a time, and have frequently neglected the implementation climate and organizational resources that influence clinical decision support. The inclusion of such factors was identified by a systematic review as "the most important improvement that can be made in health IT evaluations." (1) Identify the prevalence of four user-centered design practices at United States Veterans Affairs (VA) primary care clinics and assess the perceived utility of clinical decision support at those clinics; (2) Evaluate the association between those user-centered design practices and the perceived utility of clinical decision support. We analyzed clinic-level survey data collected in 2006-2007 from 170 VA primary care clinics. We examined four user-centered design practices: 1) pilot testing, 2) provider satisfaction assessment, 3) formal usability assessment, and 4) analysis of impact on performance improvement. We used a regression model to evaluate the association between user-centered design practices and the perceived utility of clinical decision support, while accounting for other important factors at those clinics, including implementation climate, available resources, and structural characteristics. We also examined associations separately at community-based clinics and at hospital-based clinics. User-centered design practices for clinical decision support varied across clinics: 74% conducted pilot testing, 62% conducted provider satisfaction assessment, 36% conducted a formal usability assessment, and 79% conducted an analysis of impact on performance improvement. Overall perceived utility of clinical decision support was high, with a mean rating of 4.17 (±.67) out of 5 on a composite measure. "Analysis of impact on performance improvement" was the only user-centered design practice significantly associated with perceived utility of clinical decision support, b=.47 (p<.001). This association was present in hospital-based clinics, b=.34 (p<.05), but was stronger at community-based clinics, b=.61 (p<.001). Our findings are highly supportive of the practice of analyzing the impact of clinical decision support on performance metrics. This was the most common user-centered design practice in our study, and was the practice associated with higher perceived utility of clinical decision support. This practice may be particularly helpful at community-based clinics, which are typically less connected to VA medical center resources. Published by Elsevier B.V.

78 FR 41694 - Final Priority and Requirements; Education Facilities Clearinghouse

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... the collection and dissemination of best practices for the planning, design, financing, procurement... Facilities Clearinghouse program is to provide technical assistance and training on the planning, design... dissemination of best practices for the planning, design, financing, procurement, construction, improvement...

Horizontal alignment design consistency for rural two-lane highways.

DOT National Transportation Integrated Search

1995-01-01

The state of the practice in highway geometric design consistency was determined through a review of U.S. and foreign geometric design policy, practice, and research. Models, and a menu-driven microcomputer procedure for their use, were developed for...

Low impact development (LID) and transportation stormwater practices

DOT National Transportation Integrated Search

2010-12-01

The proposed project is a combination of a research/design/best practices compilation and ranking in the format of a : design decision tool that can be used by Region X transportation designers and other researchers with respect to : current, and fut...

Economic impact of converting an interventional pain medicine physician office-based practice into a provider-based ambulatory pain practice.

PubMed

Grider, Jay S; Findley, Kelley A; Higdon, Courtney; Curtright, Jonathan; Clark, Don P

2014-01-01

One consequence of the shifting economic health care landscape is the growing trend of physician employment and practice acquisition by hospitals. These acquired practices are often converted into hospital- or provider-based clinics. This designation brings the increased services of the hospital, the accreditation of the hospital, and a new billing structure verses the private clinic (the combination of the facility and professional fee billing). One potential concern with moving to a provider-based designation is that this new structure might make the practice less competitive in a marketplace that may still be dominated by private physician office-based practices. The aim of the current study was to evaluate the impact of the provider-based/hospital fee structure on clinical volume. Determine the effect of transition to a hospital- or provider-based practice setting (with concomitant cost implications) on patient volume in the current practice milieu.   Community hospital-based academic interventional pain medicine practice. Economic analysis of effect of change in price structure on clinical volumes. The current study evaluates the effect of a change in designation with price implications on the demand for clinical services that accompany the transition to a hospital-based practice setting from a physician office setting in an academic community hospital. Clinical volumes of both procedures and clinic volumes increased in a mature practice setting following transition to a provider-based designation and the accompanying facility and professional fee structure. Following transition to a provider-based designation clinic visits were increased 24% while procedural volume demand did not change. Single practice entity and single geographic location in southeastern United States. The conversion to a hospital- or provider-based setting does not negatively impact clinical volume and referrals to community-based pain medicine practice. These results imply that factors other than price are a driver of patient choice.  

Games for Mathematics Skill Practice.

ERIC Educational Resources Information Center

Ludeman, Clinton; Sevier, Bonnie

1982-01-01

Multivision is designed to practice simple multiplication and division with one-digit numbers, and is played similarly to Sorry. Fraction Monopoly was designed to assist in practicing addition and subtraction skills with fractions, along with recognizing basic parts and matching numerals with pictorial representations, and is similar to Monopoly.…

Large-Scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation

DTIC Science & Technology

2016-08-10

AFRL-AFOSR-JP-TR-2016-0073 Large-scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation ...2016 4.  TITLE AND SUBTITLE Large-scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation 5a...performances on various machine learning tasks and it naturally lends itself to fast parallel implementations . Despite this, very little work has been

16 CFR 1018.23 - Designated Commission employee.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Designated Commission employee. 1018.23 Section 1018.23 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ADVISORY COMMITTEE MANAGEMENT Operation of Advisory Committees § 1018.23 Designated Commission employee. (a) The Chairman shall...

Communication Design Education: Could Nine Reflections Be Sufficient?

ERIC Educational Resources Information Center

van der Waarde, Karel; Vroombout, Maurits

2012-01-01

Situation: Graphic design education is subject to substantial changes. Changes in professional practice and higher education aggravate insecurities about the contents and structure of courses, assessment criteria, relations between practice, research and theory and teaching methods. Assumption: Graphic design education (visual communication design…

Sustainability by Design: A Reflection on the Suitability of Pedagogic Practice in Design and Engineering Courses in the Teaching of Sustainable Design

ERIC Educational Resources Information Center

Morris, Richard; Childs, Peter; Hamilton, Tom

2007-01-01

Courses in product design are offered within the United Kingdom at the University of Brighton and the University of Sussex and in both cases are run within engineering departments alongside traditional engineering courses. This paper outlines some of the intrinsic pedagogic practices that are employed by these, and other, design courses. It…

Design Pedagogy for an Unknown Future: A View from the Expanding Field of Design Scholarship and Professional Practice

ERIC Educational Resources Information Center

Wilson, Stephanie Elizabeth; Zamberlan, Lisa

2017-01-01

This article draws on current research investigating the notion of design for an unknown future. It reflects on recent thinking about the role of creativity in design practice and discusses implications for the development and assessment of creativity in the design studio. It begins with a review of literature on the issues and challenges…

Design for Usability; practice-oriented research for user-centered product design.

PubMed

van Eijk, Daan; van Kuijk, Jasper; Hoolhorst, Frederik; Kim, Chajoong; Harkema, Christelle; Dorrestijn, Steven

2012-01-01

The Design for Usability project aims at improving the usability of electronic professional and consumer products by creating new methodology and methods for user-centred product development, which are feasible to apply in practice. The project was focused on 5 key areas: (i) design methodology, expanding the existing approach of scenario-based design to incorporate the interaction between product design, user characteristics, and user behaviour; (ii) company processes, barriers and enablers for usability in practice; (iii) user characteristics in relation to types of products and use-situations; (iv) usability decision-making; and (v) product impact on user behaviour. The project team developed methods and techniques in each of these areas to support the design of products with a high level of usability. This paper brings together and summarizes the findings.

What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London

PubMed Central

Lennox, Laura; Doyle, Cathal; Reed, Julie E

2017-01-01

Objectives Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Design Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. Setting National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). Participants CLAHRC NWL improvement initiative teams and staff. Results The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. Conclusion The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with the method over time. PMID:28947436

16 CFR 18.4 - Size and grade designations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Size and grade designations. 18.4 Section 18.4 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE... consensus of the industry that the grade and size standard set forth in the current edition of American...

78 FR 9908 - Notice of Availability of the Draft Issuance of the Small Municipal Separate Storm Sewer System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... significant factual, legal, methodological and policy questions considered in the development of the draft... maximum extent practicable, including management practices, control techniques, and system, design [[Page... that implementation of best management practices (BMPs) designed to control storm water runoff from the...

Integrating Single-System Design Research into the Clinical Practice Class

ERIC Educational Resources Information Center

Cooper, Marlene G.

2006-01-01

Clinical practice and research are generally taught separately in Master of Social Work programs by faculty with distinct areas of expertise. This paper discusses the teaching of single-subject design research methodology by clinical faculty, in the clinical practice class. Examples from student papers demonstrate the effectiveness of integrating…

Pedagogical Reasoning and Action: Affordances of Practice-Based Teacher Professional Development

ERIC Educational Resources Information Center

Pella, Shannon

2015-01-01

A common theme has been consistently woven through the literature on teacher professional development: that practice-based designs and collaboration are two components of effective teacher learning models. In addition to collaboration and practice-based designs, inquiry cycles have been long recognized as catalysts for teacher professional…

Using Critical Incidents of Instructional Design and Multimedia Production Activities to Investigate Instructional Designers' Current Practices and Roles

ERIC Educational Resources Information Center

Sugar, William A.; Luterbach, Kenneth J.

2016-01-01

Through consideration of critical incidents, this study analyzed 106 effective, ineffective and extraordinary instructional design and multimedia production (MP) activities discussed by 36 instructional design professionals. This evaluation provided insights into these professionals' best and not so best practices during the past 6 months.…

Designing Student Citizenship: Internationalised Education in Transformative Disciplines

ERIC Educational Resources Information Center

Mendoza, Hannah Rose; Matyok, Tom

2013-01-01

Design is a transformative, socially engaged practice and design education must provide a platform from which that practice can grow. Education plays a vital role in preparing design students to move beyond a purely reactive state to one in which they are actively engaged in shaping the world around them. Such a shift is built upon the provision…

Recent Innovations in the Changing Criterion Design: Implications for Research and Practice in Special Education

ERIC Educational Resources Information Center

McDougall, Dennis; Hawkins, Jacqueline; Brady, Michael; Jenkins, Amelia

2006-01-01

This article illustrates (a) 2 recent innovations in the changing criterion research design, (b) how these innovations apply to research and practice in special education, and (c) how clinical needs influence design features of the changing criterion design. The first innovation, the range-bound changing criterion, is a very simple variation of…

A Survey to Examine Teachers' Perceptions of Design Dispositions, Lesson Design Practices, and Their Relationships with Technological Pedagogical Content Knowledge (TPACK)

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Chai, Ching Sing; Hong, Huang-Yao; Tsai, Chin-Chung

2015-01-01

This study investigates 201 Singaporean teachers' perceptions of their technological pedagogical content knowledge (TPACK), lesson design practices, and design dispositions through a survey instrument. Investigation of these constructs reveal important variables influencing teachers' perceptions of TPACK which have not yet been explored. The…

The Anatomy of Program Design for an On-Line Business Management Course

ERIC Educational Resources Information Center

Barger, Bonita

2008-01-01

How does one design an on-line course to bridge theory and practice? How can the feedback of on-going stakeholder (student and administration) be incorporated into the design process to enhance quality? This paper presents the theoretical underpinning of designing an on-line management course recognized as best practice for a "well organized…

Building Integrated Design Practice under the Concept of Sustainable Development

NASA Astrophysics Data System (ADS)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

Up-and-down designs for phase I clinical trials

PubMed Central

Liu, Suyu; Cai, Chunyan; Ning, Jing

2014-01-01

Various up-and-down designs have been proposed to improve the operating characteristics of the traditional “3+3” design, but they have been of limited use in practice. A major impediment to the adoption of the improved up-and-down designs is a lack of general guidance and a comprehensive assessment of the operating characteristics of these designs under practical clinical settings. To fill this gap, we review six up-and-down designs: the “3+3” design, accelerated titration design, biased coin design, k-in-a-row design, group up-and-down design and cumulative group up-and-down design. We conduct comprehensive simulation studies to evaluate their operating characteristics under various practical settings, and compare their performance to a theoretical optimal bound of nonparametric designs. The results show that the cumulative group up-and-down design has the best overall performance in terms of selecting the maximum tolerated dose (MTD), assigning patients to the MTD and patient safety. Its performance is generally close to the upper bound of nonparametric designs, but improvement seems possible in some cases. PMID:23856381

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 1 - GENERAL CONSIDERATIONS

EPA Science Inventory

This document is Volume 1 of a three volume series that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This first volume provides general considerations associated with the selection and design of BMPs.
Volume I provi...

Implications of design on infection prevention and control practice in a novel hospital unit: the Medical Ward of the 21st Century.

PubMed

VanSteelandt, Amanda; Conly, John; Ghali, William; Mather, Charles

2015-01-01

The physical design of hospital wards is associated with transmission of pathogenic organisms and hospital-acquired infections. A novel hospital unit, the Medical Ward of the 21st Century (W21C), optimizes features for infection prevention and control practices. Ethnographic research on the W21C versus conventional hospital wards examined the experiential and behavioural elements of the different designs. Three recurring themes emerged regarding the design features on the W21C and included visual cues, 'having a place for things', and less sharing of spaces and materials. Observational data of healthcare worker practices demonstrated significantly higher compliance with hand hygiene opportunities on the W21C compared with older hospital units. These findings suggest how the physical design of a hospital ward may enhance infection prevention and control practices.

How system designers think: a study of design thinking in human factors engineering.

PubMed

Papantonopoulos, Sotiris

2004-11-01

The paper presents a descriptive study of design thinking in human factors engineering. The objective of the study is to analyse the role of interpretation in design thinking and the role of design practice in guiding interpretation. The study involved 10 system designers undertaking the allocation of cognitive functions in three production planning and control task scenarios. Allocation decisions were recorded and verbal protocols of the design process were collected to elicit the subjects' thought processes. Verbal protocol analysis showed that subjects carried out the design of cognitive task allocation as a problem of applying a selected automation technology from their initial design deliberations. This design strategy stands in contrast to the predominant view of system design that stipulates that user requirements should be thoroughly analysed prior to making any decisions about technology. Theoretical frameworks from design research and ontological design showed that the system design process may be better understood by recognizing the role of design hypotheses in system design, as well as the diverse interactions between interpretation and practice, means and ends, and design practice and the designer's pre-understanding which shape the design process. Ways to balance the bias exerted on the design process were discussed.

A conceptual curriculum framework designed to ensure quality student health visitor training in practice.

PubMed

Hollinshead, Jayne; Stirling, Linda

2014-07-01

This paper describes the challenges faced by a trust in England following the introduction of the Health Visitor Implementation Plan. Two practice education facilitators designed a conceptual curriculum framework to ensure quality student health visitor education in practice. This curriculum complimented the excellent academic course already delivered by the University. A justification is provided for the design of the curriculum framework, including a rationale for the introduction of specific training sessions. Student and practice teacher feedback demonstrate the success of the introduction of this programme to ensure the development of student health visitors fit for practice. The conclusion places emphasis on the importance of continuous evaluation of the training programme to meet the needs of the students and the service.

The Practice of Design-Based Research: Uncovering the Interplay Between Design, Research, and the Real-World Context

ERIC Educational Resources Information Center

Joseph, Diana

2004-01-01

Recent interest in design-based research as a research and development methodology in education has begun to clarify the goals and commitments involved in this practice. So far, we have limited views into how the work of design and the work of research impact each other in the course of design-based investigations. In this article, I use the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walters, Douglas B.; Ho, Pauline; Hardesty, Jasper

Many chemicals that are frequently used in laboratories and industries can be harmful if not handled properly. Chemical safety best practices are designed to protect people from accidentally being exposed to hazardous chemicals. On the other hand, chemical security best practices are designed to protect people from someone deliberately exposing others to hazardous chemicals. Finally, many chemical safety best practices overlap with chemical security best practices, but there are important differences, as will be discussed in this paper.

Data to inform a social media component for professional development and practices: A design-based research study.

PubMed

Novakovich, Jeanette; Shaw, Steven; Miah, Sophia

2017-02-01

This DIB article includes the course artefacts, instruments, survey data, and descriptive statistics, along with in-depth correlational analysis for the first iteration of a design-based research study on designing curriculum for developing online professional identity and social media practices for a multi-major advanced professional writing course. Raw data was entered into SPSS software. For interpretation and discussion, please see the original article entitled, "Designing curriculum to shape professional social media skills and identity in virtual communities of practice" (J. Novakovich, S. Miah, S. Shaw, 2017) [1].

Users/consumers differences regarding ergonomics and design theory and practice.

PubMed

Dejean, Pierre-Henri; Wagstaff, Peter

2012-01-01

This paper presents the concept of direct and indirect users, a key issue to cooperation between ergonomists, designers and managers involved in a sustainable approach to design. What issues for Ergonomics and Design are launched by this concept? User/consumer differences should be approached taking into account Ergonomics and Design theory and practice. What dialogue and tools could help the ergonomist/designer/manager to respond to all the requirements of the future clients of the product?

Cultivation mode research of practical application talents for optical engineering major

NASA Astrophysics Data System (ADS)

Liu, Zhiying

2017-08-01

The requirements on science and technology graduates are more and higher with modern science progress and society market economy development. Because optical engineering major is with very long practicality, practice should be paid more attention from analysis of optical engineering major and students' foundation. To play role of practice to a large amount, the practice need be systemic and correlation. It should be combination of foundation and profundity. Modern foundation professional knowledge is studied with traditional optical concept and technology at the same time. Systemic regularity and correlation should be embodied in the contents. Start from basic geometrical optics concept, the optical parameter of optical instrument is analyzed, the optical module is built and ray tracing is completed during geometrical optics practice. With foundation of primary aberration calculation, the optical system is further designed and evaluated during optical design practice course. With the optical model and given instrument functions and requirements, the optical-mechanism is matched. The accuracy is calculated, analyzed and distributed in every motion segment. And the mechanism should guarantee the alignment and adjustment. The optical mechanism is designed during the instrument and element design practice. When the optical and mechanism drawings are completed, the system is ready to be fabricated. Students can complete grinding, polishing and coating process by themselves through optical fabricating practice. With the optical and mechanical elements, the system can be assembled and aligned during the thesis practice. With a set of correlated and logical practices, the students can acquire the whole process knowledge about optical instrument. All details are contained in every practice process. These practical experiences provide students working ability. They do not need much adaption anymore when they go to work after graduation. It is favorable to both student talents and employer.

Practical research on the teaching of Optical Design

NASA Astrophysics Data System (ADS)

Fan, Changjiang; Ren, Zhijun; Ying, Chaofu; Peng, Baojin

2017-08-01

Optical design, together with applied optics, forms a complete system from basic theory to application theory, and it plays a very important role in professional education. In order to improve senior undergraduates' understanding of optical design, this course is divided into three parts: theoretical knowledge, software design and product processing. Through learning theoretical knowledge, students can master the aberration theory and the design principles of typical optical system. By using ZEMAX(an imaging design software), TRACEPRO(a lighting optical design software), SOLIDWORKS or PROE( mechanical design software), student can establish a complete model of optical system. Student can use carving machine located in lab or cooperative units to process the model. Through the above three parts, student can learn necessary practical knowledge and get improved in their learning and analysis abilities, thus they can also get enough practice to prompt their creative abilities, then they could gradually change from scientific theory learners to an Optics Engineers.

Improving Student Commitment to Healthcare-Related Design Practice by Improving the Studio Learning Experience.

PubMed

Tan, Lindsay; Hong, Miyoung; Albert, Taneshia West

2017-10-01

This case study explores the influence of the healthcare design studio experience on students' short-term professional goals as measured through rates of healthcare-related certification and internship/employment. The value and relevance of interior design is evident in the healthcare design sector. However, interior design students may not perceive this value if it is not communicated through their design education. Students' experience in the design studio plays a crucial role in determining career choices, and students may be more committed to career goals when there is clear connection between major coursework and professional practice. The authors compared healthcare-related certification and internship/employment levels between two student cohorts in a capstone undergraduate interior design healthcare design studio course. The first cohort was led by the existing curriculum. The second cohort was led by the revised curriculum that specifically aimed at encouraging students to commit to healthcare-related design practice. When measured at 3 months from graduation, the second cohort, led by the revised curriculum, saw a 30% increase in Evidence-based Design Accreditation and Certification exam pass rates and a 40% increase in healthcare-related internship/employment. The challenge of interior design education is to instill in emerging professionals not only professional competence but also those professional attitudes that will make them better prepared to design spaces that improve quality of life, particularly in healthcare environments. The results exceeded the project goals, and so this could be considered a promising practice for courses focused on healthcare design education.

Mathematical Practices in a Technological Setting: A Design Research Experiment for Teaching Circle Properties

ERIC Educational Resources Information Center

Akyuz, Didem

2016-01-01

This article documents the classroom mathematical practices observed in a collegiate level teacher education course related to the circle topic. The course, which was prepared as design research, utilized a dynamic geometry environment which influenced the type and nature of the evolved mathematical practices. The study uses emergent perspective…

Enhancing Research and Practice in Early Childhood through Formative and Design Experiments

ERIC Educational Resources Information Center

Bradley, Barbara A.; Reinking, David

2011-01-01

This article describes formative and design experiments and how they can advance research and instructional practices in early childhood education. We argue that this relatively new approach to education research closes the gap between research and practice, and it addresses limitations that have been identified in early childhood research. We…

Effective Practice in the Design of Directed Independent Learning Opportunities

ERIC Educational Resources Information Center

Thomas, Liz; Jones, Robert; Ottaway, James

2015-01-01

This study, commissioned by the HEA and the QAA focuses on directed independent learning practices in UK higher education. It investigates what stakeholders (including academic staff and students) have found to be the most effective practices in the inception, design, quality assurance and enhancement of directed independent learning and explores…

Evidence-Based Practices in a Changing World: Reconsidering the Counterfactual in Education Research

ERIC Educational Resources Information Center

Lemons, Christopher J.; Fuchs, Douglas; Gilbert, Jennifer K.; Fuchs, Lynn S.

2014-01-01

Experimental and quasi-experimental designs are used in educational research to establish causality and develop effective practices. These research designs rely on a counterfactual model that, in simple form, calls for a comparison between a treatment group and a control group. Developers of educational practices often assume that the population…

Motivating Your Team: Coaching for Performance in Schools

ERIC Educational Resources Information Center

Taylor, Peter R.

2007-01-01

Designed to help you get the best out of your team, this practical book shows you how to motivate and engage people through the effective design, application and review of performance management. Checklists and practical guidance notes are provided to help you understand the principles and practice of effective performance management and how the…

A Protean Practice? Perspectives on the Practice of Action Learning

ERIC Educational Resources Information Center

Brook, Cheryl; Pedler, Mike; Burgoyne, John G

2013-01-01

Purpose: The purpose of the paper is to assess the extent to which these practitioners ' perspectives and practices match Willis's conception of a Revans "gold standard" of action learning. Design/methodology/approach: This study adopts a qualitative design and methodology based on interviews and the collection of cases or accounts of…

Supporting Language-Minoritized Students in Science Practices within a Research-Practice Partnership

ERIC Educational Resources Information Center

Wingert, Kerri M.

2017-01-01

This dissertation investigates the design and implementation of educational change efforts focused on supporting middle-school language-minoritized students in science learning. These chapters take as their units of analyses the shared activity of a research-practice partnership, the co-design of a discourse-based intervention and its outcomes for…

Art and Design Practices in Nigeria: The Problem of Dropping Out

ERIC Educational Resources Information Center

Ogunduyile, Sunday Roberts; Kayode, Femi; Ojo, Bankole

2008-01-01

Despite interest in the arts, art and design practice in Nigeria continues to witness a downward trend. A new orientation and redirection of priorities, skills development, and patterns of practice that are not contradictory to the code of professional conduct and ethical procedures is contemplated. This paper groups the professionally trained…

Teaching HR Professionals: The Classroom as a Community of Practice

ERIC Educational Resources Information Center

Rowlands, Kate; Avramenko, Alex

2013-01-01

This paper introduces an innovative course design incorporating both communities of practice and reflective practice as a learning strategy for part-time learners in higher education. The new design has been applied to teaching HR practitioners in a UK-based business school. Findings indicate that the suggested way of organizing teaching and…

What Informs Practice and What Is Valued in Corporate Instructional Design? A Mixed Methods Study

ERIC Educational Resources Information Center

Thompson-Sellers, Ingrid N.

2012-01-01

This study used a two-phased explanatory mixed-methods design to explore in-depth what factors are perceived by Instructional Design and Technology (IDT) professionals as impacting instructional design practice, how these factors are valued in the field, and what differences in perspectives exist between IDT managers and non-managers. For phase 1…

Helping coaches apply the principles of representative learning design: validation of a tennis specific practice assessment tool.

PubMed

Krause, Lyndon; Farrow, Damian; Reid, Machar; Buszard, Tim; Pinder, Ross

2018-06-01

Representative Learning Design (RLD) is a framework for assessing the degree to which experimental or practice tasks simulate key aspects of specific performance environments (i.e. competition). The key premise being that when practice replicates the performance environment, skills are more likely to transfer. In applied situations, however, there is currently no simple or quick method for coaches to assess the key concepts of RLD (e.g. during on-court tasks). The aim of this study was to develop a tool for coaches to efficiently assess practice task design in tennis. A consensus-based tool was developed using a 4-round Delphi process with 10 academic and 13 tennis-coaching experts. Expert consensus was reached for the inclusion of seven items, each consisting of two sub-questions related to (i) the task goal and (ii) the relevance of the task to competition performance. The Representative Practice Assessment Tool (RPAT) is proposed for use in assessing and enhancing practice task designs in tennis to increase the functional coupling between information and movement, and to maximise the potential for skill transfer to competition contexts.

University-Partnered New School Designs: Fertile Ground for Research-Practice Partnerships

ERIC Educational Resources Information Center

Quartz, Karen Hunter; Weinstein, Rhona S.; Kaufman, Gail; Levine, Harold; Mehan, Hugh; Pollock, Mica; Priselac, Jody Z.; Worrell, Frank C.

2017-01-01

This commentary suggests that new school design is a fertile policy context for advancing research-practice partnerships. The authors represent four public universities that have created new school designs in partnership with urban school districts. Unlike the laboratory schools of previous generations, these university-partnered public schools…

Graphic Design: A Career Guide and Education Directory.

ERIC Educational Resources Information Center

Poggenpohl, Sharon Helmer, Ed.

This guide aims to help students make informed decisions about careers in graphic design. The guide defines the purpose and practice of the graphic design field and identifies the strong link between effective educational programs and effective professional practices. Suggestions are given for evaluating schools and potential employers. Comments…

The use of high impact practices (HIPs) on chemistry lesson design and implementation by pre-service teachers

NASA Astrophysics Data System (ADS)

Chamrat, Suthida; Apichatyotin, Nattaya; Puakanokhirun, Kittaporn

2018-01-01

The quality of lesson design is essential to learning effectiveness. Research shows some characteristics of lessons have strong effect on learning which were grouped into "High Impact Practices or HIPs. This research aims to examine the use of HIPs on chemistry lesson design as a part of Teaching Science Strand in Chemistry Concepts course. At the first round of lesson design and implementing in classroom, 14 chemistry pre-services teachers freely selected topics, designed and implemented on their own ideas. The lessons have been reflected by instructors and their peers. High Impact Practices were overtly used as the conceptual framework along with the After-Action Review and Reflection (AARR). The selected High Impact practice in this study consisted of 6 elements: well-designed lesson, vary cognitive demand/academic challenge, students center approach, opportunity of students to reflect by discussion or writing, the assignment of project based learning or task, and the lesson reflects pre-service teachers' Technological Pedagogical Content Knowledge (TPACK). The second round, pre-service teachers were encouraged to explicitly used 6 High Impact Practices in cooperated with literature review specified on focused concepts for bettering designed and implemented lessons. The data were collected from 28 lesson plans and 28 classroom observations to compare and discuss between the first and second lesson and implementation. The results indicated that High Impact Practices effect on the quality of delivered lesson. However, there are some elements that vary on changes which were detailed and discussed in this research article.

Social research design: framework for integrating philosophical and practical elements.

PubMed

Cunningham, Kathryn Burns

2014-09-01

To provide and elucidate a comprehensible framework for the design of social research. An abundance of information exists concerning the process of designing social research. The overall message that can be gleaned is that numerable elements - both philosophical (ontological and epistemological assumptions and theoretical perspective) and practical (issue to be addressed, purpose, aims and research questions) - are influential in the process of selecting a research methodology and methods, and that these elements and their inter-relationships must be considered and explicated to ensure a coherent research design that enables well-founded and meaningful conclusions. There is a lack of guidance concerning the integration of practical and philosophical elements, hindering their consideration and explication. The author's PhD research into loneliness and cancer. This is a methodology paper. A guiding framework that incorporates all of the philosophical and practical elements influential in social research design is presented. The chronological and informative relationships between the elements are discussed. The framework presented can be used by social researchers to consider and explicate the practical and philosophical elements influential in the selection of a methodology and methods. It is hoped that the framework presented will aid social researchers with the design and the explication of the design of their research, thereby enhancing the credibility of their projects and enabling their research to establish well-founded and meaningful conclusions.

RESEARCH DESIGNS IN SPORTS PHYSICAL THERAPY

PubMed Central

2012-01-01

Research is designed to answer a question or to describe a phenomenon in a scientific process. Sports physical therapists must understand the different research methods, types, and designs in order to implement evidence‐based practice. The purpose of this article is to describe the most common research designs used in sports physical therapy research and practice. Both experimental and non‐experimental methods will be discussed. PMID:23091780

Corporate Sector Practice Informs Online Workforce Training for Australian Government Agencies: Towards Effective Educational-Learning Systems Design

ERIC Educational Resources Information Center

McKay, Elspeth; Vilela, Cenie

2011-01-01

The purpose of this paper is to outline government online training practice. We searched individual research domains of the human-dimensions of Human Computer Interaction (HCI), information and communications technologies (ICT) and instructional design for evidence of either corporate sector or government training practices. We overlapped these…

Total Quality Management in Secondary Schools in Kenya: Extent of Practice

ERIC Educational Resources Information Center

Ngware, Moses Waithanji; Wamukuru, David Kuria; Odebero, Stephen Onyango

2006-01-01

Purpose: To investigate the extent to which secondary schools practiced aspects of total quality management (TQM). Design/methodology/approach: A cross-sectional research design was used in this study. A sample of 300 teachers in a residential session during a school holiday provided their perceptions on the practice of TQM in their schools. Data…

Teachers' Needs and Predesigned Instructional Practices: An Analysis of a Reading/Language Arts Coursebook for a Second Grade Class

ERIC Educational Resources Information Center

Ajayi, Lasisi

2005-01-01

Coursebooks are an indispensable tool of the language arts instruction in elementary schools across California State. They are designed for teachers with precise indications of instructional practices, classroom social and participatory structures. However, these pre-designed practices are hardly evaluated for their appropriateness to meet…

An Investigation of Knowledge-Building Activities in an Online Community of Practice at Subaru of America

ERIC Educational Resources Information Center

Land, Susan M.; Draper, Darryl C.; Ma, Ziyan; Hsieh, Hsiu-Wei; Smith, Brian K.; Jordan, Robert

2009-01-01

Current approaches to workplace learning emphasize designing communities of practice that are intended to support both formal and informal knowledge acquisition. This article presents the design and research of a knowledge-based community of practice for Subaru, based on principles outlined by Scardamalia (2002) and Zhang, Scardamalia, Lamon,…

Design-Based School Improvement: A Practical Guide for Education Leaders

ERIC Educational Resources Information Center

Mintrop, Rick

2016-01-01

At the heart of the effort to enact and scale up successful school reforms is the need for more robust links between research and practice. One promising approach is design development, a methodology widely used in other fields and only recently adapted to education, which offers a disciplined process for identifying practical problems, assessing…

Linking Research and Practice through Teacher Communities: A Place Where Formal and Practical Knowledge Meet?

ERIC Educational Resources Information Center

Pareja Roblin, Natalie N.; Ormel, Bart J. B.; McKenney, Susan E.; Voogt, Joke M.; Pieters, Jules M.

2014-01-01

This study characterises the links between research and practice across 12 projects concerned with the collaborative design of lesson plans by teacher communities (TCs). Analyses focused on sources of knowledge used to inform lesson design, participants' roles and knowledge generated by the teacher community. Three patterns emerged pertaining…

Effective Online Lectures: Improving Practice through Design and Pedagogy

ERIC Educational Resources Information Center

Bese, Terry Lane

2016-01-01

The purpose of this research project was to improve the practice of using online lectures at a small private university. Using action research methodology, the researcher worked with a group of five university instructors to refine the use of online lectures through design and pedagogical practice. Beginning with a template or guide based on the…

Study Quality in SLA: An Assessment of Designs, Analyses, and Reporting Practices in Quantitative L2 Research

ERIC Educational Resources Information Center

Plonsky, Luke

2013-01-01

This study assesses research and reporting practices in quantitative second language (L2) research. A sample of 606 primary studies, published from 1990 to 2010 in "Language Learning and Studies in Second Language Acquisition," was collected and coded for designs, statistical analyses, reporting practices, and outcomes (i.e., effect…

Iterative Design toward Equity: Youth Repertoires of Practice in a High School Maker Space

ERIC Educational Resources Information Center

Martin, Lee; Dixon, Colin; Betser, Sagit

2018-01-01

Despite their potential, maker activities do not always support equitable engagement. The authors report on a design research study where they worked to support equitable engagement of youth repertoires of practice in a high school makerspace. Their orientation toward equity is grounded in the construct of repertoires of practice, and they focus…

Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

ERIC Educational Resources Information Center

Jung, Ji yoon

2017-01-01

The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

Maximum-performance fiber-optic irradiation with nonimaging designs.

PubMed

Fang, Y; Feuermann, D; Gordon, J M

1997-10-01

A range of practical nonimaging designs for optical fiber applications is presented. Rays emerging from a fiber over a restricted angular range (small numerical aperture) are needed to illuminate a small near-field detector at maximum radiative efficiency. These designs range from pure reflector (all-mirror), to pure dielectric (refractive and based on total internal reflection) to lens-mirror combinations. Sample designs are shown for a specific infrared fiber-optic irradiation problem of practical interest. Optical performance is checked with computer three-dimensional ray tracing. Compared with conventional imaging solutions, nonimaging units offer considerable practical advantages in compactness and ease of alignment as well as noticeably superior radiative efficiency.

The design and application of effective written instructional material: a review of published work.

PubMed

Mayberry, John F

2007-09-01

This review will consider the evidence base for the format of educational material drawing on academic papers and the practice of the design industry. The core issues identified from the review are drawn together in guidelines for educational posters, text and web based material. The review deals with the design of written material both for use in leaflets and books as well as the impact of factors such as font type and size as well as colour on poster design. It sets these aspects of educational material within a research framework, which looks at impact on learning and subsequent change in practice. These issues are examined through a practical example of a poster designed for a regional gastroenterology meeting.

Thin-film module circuit design: Practical and reliability aspects

NASA Technical Reports Server (NTRS)

Daiello, R. V.; Twesme, E. N.

1985-01-01

This paper will address several aspects of the design and construction of submodules based on thin film amorphous silicon (a-Si) p i n solar cells. Starting from presently attainable single cell characteristics, and a realistic set of specifications, practical module designs are discussed from the viewpoints of efficient designs, the fabrication requirements, and reliability concerns. The examples center mostly on series interconnected modules of the superstrate type with detailed discussions of each portion of the structure in relation to its influence on module efficiency. Emphasis is placed on engineering topics such as: area coverage, optimal geometries, and cost and reliability. Practical constraints on achieving optimal designs, along with some examples of potential pitfalls in the manufacture and subsequent performance of a-Si modules are discussed.

Design Approaches to Support Preservice Teachers in Scientific Modeling

NASA Astrophysics Data System (ADS)

Kenyon, Lisa; Davis, Elizabeth A.; Hug, Barbara

2011-02-01

Engaging children in scientific practices is hard for beginning teachers. One such scientific practice with which beginning teachers may have limited experience is scientific modeling. We have iteratively designed preservice teacher learning experiences and materials intended to help teachers achieve learning goals associated with scientific modeling. Our work has taken place across multiple years at three university sites, with preservice teachers focused on early childhood, elementary, and middle school teaching. Based on results from our empirical studies supporting these design decisions, we discuss design features of our modeling instruction in each iteration. Our results suggest some successes in supporting preservice teachers in engaging students in modeling practice. We propose design principles that can guide science teacher educators in incorporating modeling in teacher education.

Sustainable Rest Area Design and Operations

DOT National Transportation Integrated Search

2017-10-01

One way in which State Departments of Transportation (DOTs) can modernize their rest areas while reducing operations and maintenance costs is by incorporating sustainable practices into rest area design and operations. Sustainability practices that D...

Pay attention to reflux/feed entry design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fleming, B.; Martin, G.R.; Hartman, E.L.

1996-01-01

Trays generally are forgiving pieces of equipment and can conceal the effects of poorly designed feed and reflux entries. When one tries to push a tower to its hydraulic limit, however, poor entry design can penalize the performance of the trays and result in a lower final capacity. Normally, new towers are not as susceptible to entry design problems as ones being revamped. This is because new towers usually have some degree of capacity oversizing.Standard design practices used for new columns having spare capacity, though, may not be suitable for revamped towers. In this article, the authors detail the basicmore » principles of reflux and feed entry design, good practices to follow, and poor practices to avoid. They also include a case study of a large-diameter light hydrocarbon splitter revamped with high capacity trays to illustrate the potential pitfalls associated with incorrectly designed reflux and feed entry arrangements.« less

Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

NASA Astrophysics Data System (ADS)

Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

Safety, security and dual-use chemicals

DOE PAGES

Walters, Douglas B.; Ho, Pauline; Hardesty, Jasper

2014-12-18

Many chemicals that are frequently used in laboratories and industries can be harmful if not handled properly. Chemical safety best practices are designed to protect people from accidentally being exposed to hazardous chemicals. On the other hand, chemical security best practices are designed to protect people from someone deliberately exposing others to hazardous chemicals. Finally, many chemical safety best practices overlap with chemical security best practices, but there are important differences, as will be discussed in this paper.

Incorporating Risk Assessment and Inherently Safer Design Practices into Chemical Engineering Education

ERIC Educational Resources Information Center

Seay, Jeffrey R.; Eden, Mario R.

2008-01-01

This paper introduces, via case study example, the benefit of including risk assessment methodology and inherently safer design practices into the curriculum for chemical engineering students. This work illustrates how these tools can be applied during the earliest stages of conceptual process design. The impacts of decisions made during…

The Practice of Designing Qualitative Research on Educational Leadership: Notes for Emerging Scholars and Practitioner-Scholars

ERIC Educational Resources Information Center

Knapp, Michael S.

2017-01-01

This article addresses a gap in methodological writing, concerning typical practice in designing qualitative inquiry, especially in research on educational leadership. The article focuses on how qualitative research designs are actually developed and explores implications for scholars' work, especially for new scholars and for methods teachers.…

Methodological Innovation in Practice-Based Design Doctorates

ERIC Educational Resources Information Center

Yee, Joyce S. R.

2010-01-01

This article presents a selective review of recent design PhDs that identify and analyse the methodological innovation that is occurring in the field, in order to inform future provision of research training. Six recently completed design PhDs are used to highlight possible philosophical and practical models that can be adopted by future PhD…

Learning about and Practice of Designing Local Data Bases as an Harmonizing Factor.

ERIC Educational Resources Information Center

Neelameghan, A.

This paper provides information workers with some practical approaches to the design, development, and use of local databases that form components of information storage and retrieval systems (ISR) and of automated library operations. Topics discussed include: (1) course objectives for the design and development of local databases for library and…

The Threshold of Uncertainty in Teaching Design

ERIC Educational Resources Information Center

Osmond, Jane; Tovey, Michael

2015-01-01

In many of our universities and colleges there is a long established approach to teaching design through practice. For most students their end goal is to achieve a level of capability to function as designers in the professional world. Their education helps them construct a passport to enter this community of professional practice. Part of the…

Characterization and development of truck load spectra and growth factors for current and future pavement design practices in Louisiana : technical summary report.

DOT National Transportation Integrated Search

2011-07-01

Current roadway pavement design practices follow the standards set by the American Society of State : Highway and Transportation Officials (AASHTO), which require the use of an equivalent single axle load : (ESAL-18 kip single axle load) for design t...

Using Mobile Technologies to Create Interwoven Learning Interactions: An Intuitive Design and Its Evaluation

ERIC Educational Resources Information Center

Ting, Yu-Liang

2013-01-01

Numerous studies have proposed and implemented various innovative designs of mobile learning practices, and several pedagogical affordances of mobile technologies in different subject domains have also been suggested. This study proposes a notion for helping instructors design an innovative mobile learning practice in their subject domain. The…

The Rise of the Embedded Designer in the Creative Industries

ERIC Educational Resources Information Center

Fleischmann, Katja; Daniel, Ryan

2015-01-01

Work practices in the creative industries have changed significantly since the turn of the twenty-first century. The design profession in particular has been influenced by rapidly emerging digital media practices and processes. While the design sector remains a significant source of employment, in recent years, there has been considerable growth…

Teaching Art and Design: Communicating Creative Practice through Embodied and Tacit Knowledge

ERIC Educational Resources Information Center

Budge, Kylie

2016-01-01

How do artists and designers teaching in universities communicate creative practice as they teach art/design? There is much discussion about the "mystery" of creativity, but little understanding of how teaching occurs in creative contexts. Understanding this topic better will develop greater knowledge within the academy of how art and…

Learning Design: Requirements, Practice and Prospects

ERIC Educational Resources Information Center

MacLean, Piers; Scott, Bernard

2007-01-01

Purpose: The purpose of this paper is to describe research into the requirements, practice and prospects for the field of learning design and provide the findings of this study to date alongside early recommendations for furthering the profession in the UK. Design/methodology/approach: The paper describes the findings of a review of the literature…

Modeling as an Engineering Habit of Mind and Practice

ERIC Educational Resources Information Center

Lammi, Matthew D.; Denson, Cameron D.

2017-01-01

In this paper we examine a case study of a pedagogical strategy that focuses on the teaching of modeling as a habit of mind and practice for novice designers engaged in engineering design challenges. In an engineering design course, pre-service teachers created modeling artifacts in the form of conceptual models, graphical models, mathematical…

Experimental investigation of shaping disturbance observer design for motion control of precision mechatronic stages with resonances

NASA Astrophysics Data System (ADS)

Yang, Jin; Hu, Chuxiong; Zhu, Yu; Wang, Ze; Zhang, Ming

2017-08-01

In this paper, shaping disturbance observer (SDOB) is investigated for precision mechatronic stages with middle-frequency zero/pole type resonance to achieve good motion control performance in practical manufacturing situations. Compared with traditional standard disturbance observer (DOB), in SDOB a pole-zero cancellation based shaping filter is cascaded to the mechatronic stage plant to meet the challenge of motion control performance deterioration caused by actual resonance. Noting that pole-zero cancellation is inevitably imperfect and the controller may even consequently become unstable in practice, frequency domain stability analysis is conducted to find out how each parameter of the shaping filter affects the control stability. Moreover, the robust design criterion of the shaping filter, and the design procedure of SDOB, are both proposed to guide the actual design and facilitate practical implementation. The SDOB with the proposed design criterion is applied to a linear motor driven stage and a voice motor driven stage, respectively. Experimental results consistently validate the effectiveness nature of the proposed SDOB scheme in practical mechatronics motion applications. The proposed SDOB design actually could be an effective unit in the controller design for motion stages of mechanical manufacture equipments.

Design for reliability: NASA reliability preferred practices for design and test

NASA Technical Reports Server (NTRS)

Lalli, Vincent R.

1994-01-01

This tutorial summarizes reliability experience from both NASA and industry and reflects engineering practices that support current and future civil space programs. These practices were collected from various NASA field centers and were reviewed by a committee of senior technical representatives from the participating centers (members are listed at the end). The material for this tutorial was taken from the publication issued by the NASA Reliability and Maintainability Steering Committee (NASA Reliability Preferred Practices for Design and Test. NASA TM-4322, 1991). Reliability must be an integral part of the systems engineering process. Although both disciplines must be weighed equally with other technical and programmatic demands, the application of sound reliability principles will be the key to the effectiveness and affordability of America's space program. Our space programs have shown that reliability efforts must focus on the design characteristics that affect the frequency of failure. Herein, we emphasize that these identified design characteristics must be controlled by applying conservative engineering principles.

Building inhabitant feedback: Creating a reflective practice for environmental design using activity theory

NASA Astrophysics Data System (ADS)

Cunningham, Dara Suzanne

The way buildings are designed now, there is little feedback from use involved in the design process. Attempts to correct this problem have been made in the form of Post Occupancy Evaluations (POEs) for 50-years but have largely failed. POEs are the accepted method for environmental designers to collect feedback about buildings in use. They are infrequently conducted, after the building is built, in a one-time only evaluation, and not funded as part of the build process. Other products receive feedback about the design in use from online critiques. Online critiques could provide a platform for feedback from actors engaged with buildings in use for environmental designers to utilize in developing reflective design rationale to avoid adverse consequences in future designs or correct consequences in past and current designs. Since buildings constitute such a large part of the human environment, it's important to research the effects of buildings on their inhabitants. In order for environmental designers to act on feedback from situated use, designers need to have access to that feedback and all actors interacting with the building design need to have an easy, inexpensive, and accessible method to submit feedback. These needs can be addressed by utilizing modern networked and mobile computing to collect and access building feedback. The analysis presented in this dissertation is informed by a thorough evaluation of the theory of reflective practice, activity theory, environmental design, and cognitive science research. From this analysis, I developed the following contributions. First, I expanded Schon's reflective practice by combining his theory with a modified version of activity theory, using activity theory to enrich reflective practice and create Reflective Activity Systems Theory (RAST), which provides a new framework to develop design rationale based on feedback from use and a focus on the activity. Second, I suggest the design of an activity information system, Socio-Technical Environments for Evolutionary Design (STEED), which provides an interactive platform for actor and artifact feedback from the use situation. Third, I discuss implications for practice by discussing how the feedback from actors and artifacts in situated use can be used to create reflective design rationale.

Three Dialogs: A Framework for the Analysis and Assessment of Twenty-First-Century Literacy Practices, and Its Use in the Context of Game Design within "Gamestar Mechanic"

ERIC Educational Resources Information Center

Games, Ivan Alex

2008-01-01

This article discusses a framework for the analysis and assessment of twenty-first-century language and literacy practices in game and design-based contexts. It presents the framework in the context of game design within "Gamestar Mechanic", an innovative game-based learning environment where children learn the Discourse of game design. It…

Menstrual Hygiene Practices and Sources of Menstrual Hygiene Information among Adolescent Secondary School Girls in Abakaliki Education Zone of Ebonyi State

ERIC Educational Resources Information Center

Ilo, Cajetan I.; Nwimo, Ignatius O.; Onwunaka, Chinagorom

2016-01-01

Menstruation is clouded by socio-cultural restrictions resulting in adolescent girls remaining ignorant of hygienic practices. The study was designed to ascertain the menstrual hygiene practices and sources of menstrual hygiene information among 1200 adolescent secondary school girls, who completed the questionnaire designed for the study. Out of…

Design-Grounded Assessment: A Framework and a Case Study of Web 2.0 Practices in Higher Education

ERIC Educational Resources Information Center

Ching, Yu-Hui; Hsu, Yu-Chang

2011-01-01

This paper synthesis's three theoretical perspectives, including sociocultural theory, distributed cognition, and situated cognition, into a framework to guide the design and assessment of Web 2.0 practices in higher education. In addition, this paper presents a case study of Web 2.0 practices. Thirty-seven online graduate students participated in…

Investigating Peer Review as an Intentional Learning Strategy to Foster Collaborative Knowledge-Building in Students of Instructional Design

ERIC Educational Resources Information Center

Brill, Jennifer M.; Hodges, Charles B.

2011-01-01

Peer review has been advocated for as an intentional strategy to support the knowledge and skill attainment of adult learners preparing for professional practice, including those students preparing for instructional design and technology practice. The purposes of this article are to discuss the practical application of peer review as an…

Designing for Engagement: Using the ADDIE Model to Integrate High-Impact Practices into an Online Information Literacy Course

ERIC Educational Resources Information Center

Nichols Hess, Amanda Kathryn; Greer, Katie

2016-01-01

In this article, the authors share how a team of librarians used the ADDIE instructional design model to incorporate best practices in teaching and learning into an online, four-credit information literacy course. In this redesign process, the Association of American Colleges and Universities' high-impact practices and e-learning best practices…

Pre-Service Teachers' Competencies and Perceptions of Necessity about Practical Tools for Content Development

ERIC Educational Resources Information Center

Eren, Esra; Avci, Zeynep Yurtseven; Kapucu, Munise Seckin

2015-01-01

The purpose of the study is to investigate pre-service teachers' competencies and their perceptions of necessity about using practical tools for content development. The study was designed using pre- and post-test experimental design method. The study group consisted of 170 pre-service teachers at a public university in Turkey. The Practical Tools…

Career Mobility: Implementing the Ladder Concept in Associate Degree and Practical Nursing Curricula.

ERIC Educational Resources Information Center

Story, Donna Ketchum

Designing a career ladder curriculum is not simply taking an existing practical nurse curriculum and an associate degree nursing curriculum and placing one after the other. The curriculum is designed to produce students who are competent practitioners as practical nurses at the end of the first level and then allow them to continue for an…

Blended Interaction Design: A Spatial Workspace Supporting HCI and Design Practice

NASA Astrophysics Data System (ADS)

Geyer, Florian

This research investigates novel methods and techniques along with tool support that result from a conceptual blend of human-computer interaction with design practice. Using blending theory with material anchors as a theoretical framework, we frame both input spaces and explore emerging structures within technical, cognitive, and social aspects. Based on our results, we will describe a framework of the emerging structures and will design and evaluate tool support within a spatial, studio-like workspace to support collaborative creativity in interaction design.

Working on the Boundaries: Philosophies and Practices of the Design Process

NASA Technical Reports Server (NTRS)

Ryan, R.; Blair, J.; Townsend, J.; Verderaime, V.

1996-01-01

While systems engineering process is a program formal management technique and contractually binding, the design process is the informal practice of achieving the design project requirements throughout all design phases of the systems engineering process. The design process and organization are systems and component dependent. Informal reviews include technical information meetings and concurrent engineering sessions, and formal technical discipline reviews are conducted through the systems engineering process. This paper discusses and references major philosophical principles in the design process, identifies its role in interacting systems and disciplines analyses and integrations, and illustrates the process application in experienced aerostructural designs.

Recommendations for research design of telehealth studies.

PubMed

Chumbler, Neale R; Kobb, Rita; Brennan, David M; Rabinowitz, Terry

2008-11-01

Properly designed randomized controlled trials (RCTs) are the gold standard to use when examining the effectiveness of telehealth interventions on clinical outcomes. Some published telehealth studies have employed well-designed RCTs. However, such methods are not always feasible and practical in particular settings. This white paper addresses not only the need for properly designed RCTs, but also offers alternative research designs, such as quasi-experimental designs, and statistical techniques that can be employed to rigorously assess the effectiveness of telehealth studies. This paper further offers design and measurement recommendations aimed at and relevant to administrative decision-makers, policymakers, and practicing clinicians.

Implementation of the NHLBI Integrated Guidelines for Cardiovascular Health and Risk Reduction in Children and Adolescents: Rationale and Study Design for Young Hearts, Strong Starts, a Cluster-Randomized Trial Targeting Body Mass Index, Blood Pressure, and Tobacco

PubMed Central

LaBresh, Kenneth A.; Lazorick, Suzanne; Ariza, Adolfo J.; Furberg, Robert D.; Whetstone, Lauren; Hobbs, Connie; de Jesus, Janet; Bender, Randall H.; Salinas, Ilse G.; Binns, Helen J.

2014-01-01

Background Cardiovascular disease (CVD) and the underlying atherosclerosis begin in childhood, and their presence and intensity are related to known cardiovascular disease risk factors. Attention to risk factor control in childhood has the potential to reduce subsequent risk of CVD. Objective The Young Hearts Strong Starts Study was designed to test strategies facilitating adoption of the National, Heart, Lung and Blood Institute supported Integrated Guidelines for Cardiovascular Health and Risk Reduction in Children and Adolescents. This study compares guideline-based quality measures for body mass index, blood pressure, and tobacco using two strategies: a multifaceted, practice-directed intervention versus standard dissemination. Study Design Two primary care research networks recruited practices and provided support for the intervention and outcome evaluations. Individual practices were randomly assigned to the intervention or control groups using a cluster randomized design based on network affiliation, number of clinicians per practice, urban versus nonurban location, and practice type. The units of observation are individual children because measure adherence is abstracted from individual patient’s medical records. The units of randomization are physician practices. This results in a multilevel design in which patients are nested within practices. The intervention practices received toolkits and supported guideline implementation including academic detailing, an ongoing e-learning group. This project is aligned with the American Board of Pediatrics Maintenance of Certification requirements including monthly physician self-abstraction, webinars, and other elements of the trial. Significance This trial will provide an opportunity to demonstrate tools and strategies to enhance CV prevention in children by guideline-based interventions. PMID:24295879

Design and Control of Chemical Grouting : Volume 3 - Engineering Practice

DOT National Transportation Integrated Search

1983-04-01

Recent improvements in the engineering practice of chemical grouting have provided increased confidence in this method of ground modification. Designers can significantly improve the success of chemical grouting by defining their grouting program obj...

Methodological convergence of program evaluation designs.

PubMed

Chacón-Moscoso, Salvador; Anguera, M Teresa; Sanduvete-Chaves, Susana; Sánchez-Martín, Milagrosa

2014-01-01

Nowadays, the confronting dichotomous view between experimental/quasi-experimental and non-experimental/ethnographic studies still exists but, despite the extensive use of non-experimental/ethnographic studies, the most systematic work on methodological quality has been developed based on experimental and quasi-experimental studies. This hinders evaluators and planners' practice of empirical program evaluation, a sphere in which the distinction between types of study is changing continually and is less clear. Based on the classical validity framework of experimental/quasi-experimental studies, we carry out a review of the literature in order to analyze the convergence of design elements in methodological quality in primary studies in systematic reviews and ethnographic research. We specify the relevant design elements that should be taken into account in order to improve validity and generalization in program evaluation practice in different methodologies from a practical methodological and complementary view. We recommend ways to improve design elements so as to enhance validity and generalization in program evaluation practice.

Changing paradigms: Manufacturing vs. fabricating a high volume Hold Down and Release Mechanism

NASA Technical Reports Server (NTRS)

Maus, Daryl; Monick, Doug

1995-01-01

A detailed description of the Hold Down and Release Mechanisms designed for a 70+ constellation of spacecraft is presented. The design is reviewed to understand the practical implications of severely constraining cost. Strategies for adapting the traditional aerospace design paradigm to a more commercial, cost driven paradigm are discussed and practical examples are cited.

Designing Role-Playing Video Games for Ethical Thinking

ERIC Educational Resources Information Center

Schrier, Karen

2017-01-01

How can we better design games, such as role-playing video games (RPGs), to support the practice of ethical thinking? Ethical thinking is a critical component of twenty-first century citizenship and we need to design ways to creatively support its practice. This study investigates how male participants, ages 18-34, make ethical decisions in three…

Teaching English Using Video Materials: Design and Delivery of a Practical Course

ERIC Educational Resources Information Center

Lopez-Alvarado, Julio

2017-01-01

In this paper, a practical course for listening, speaking, reading and writing was designed using authentic video material. The aim of this paper is to offer tools to the TEFL teacher in order to design new course materials using video material. The development procedure is explained in detail, and the underpinning main theories are also…

Failure? Isn't It Time to Slay the Design-Dragon?

ERIC Educational Resources Information Center

Winkler, Dietmar R.

2009-01-01

There is a closed cycle of design education that replicates the most common design practice--and feeds into that practice that seeks awards based on incremental change supported by professional organizations and trade journals--that feeds back to education forms for imitation. This is the educational failure this paper cites. It takes to task the…

Generalized Simulation Model for a Switched-Mode Power Supply Design Course Using MATLAB/SIMULINK

ERIC Educational Resources Information Center

Liao, Wei-Hsin; Wang, Shun-Chung; Liu, Yi-Hua

2012-01-01

Switched-mode power supplies (SMPS) are becoming an essential part of many electronic systems as the industry drives toward miniaturization and energy efficiency. However, practical SMPS design courses are seldom offered. In this paper, a generalized MATLAB/SIMULINK modeling technique is first presented. A proposed practical SMPS design course at…

Justifying the Design and Selection of Literacy and Thinking Tools

ERIC Educational Resources Information Center

Whitehead, David

2008-01-01

Criteria for the design and selection of literacy and thinking tools that allow educators to justify what they do are described within a wider framework of learning theory and research into best practice. Based on a meta-analysis of best practice, results from a three year project designed to evaluate the effectiveness of a secondary school…

Task Relevance in the Design of Online Professional Development for Teachers of ELLs: A Q Methodology Study

ERIC Educational Resources Information Center

Collins, Linda J.; Liang, Xin

2014-01-01

Online professional development (oPD) for teachers should focus on designing web-based learning opportunities that help practicing educators solve the tough problems of practice when working in their schools. Technology, pedagogy, and content knowledge can be integrated in the design of online professional development modules to enhance task…

Evaluating Design-Based Formative Assessment Practices in Outdoor Science Teaching

ERIC Educational Resources Information Center

Hartmeyer, Rikke; Stevenson, Matt P.; Bentsen, Peter

2016-01-01

Background and purpose: Research in formative assessment often pays close attention to the strategies which can be used by teachers. However, less emphasis in the literature seems to have been paid to study the application of formative assessment designs in practice. In this paper, we argue that a formative assessment design that we call…

A method of designing smartphone interface based on the extended user's mental model

NASA Astrophysics Data System (ADS)

Zhao, Wei; Li, Fengmin; Bian, Jiali; Pan, Juchen; Song, Song

2017-01-01

The user's mental model is the core guiding theory of product design, especially practical products. The essence of practical product is a tool which is used by users to meet their needs. Then, the most important feature of a tool is usability. The design method based on the user's mental model provides a series of practical and feasible theoretical guidance for improving the usability of the product according to the user's awareness of things. In this paper, we propose a method of designing smartphone interface based on the extended user's mental model according to further research on user groups. This approach achieves personalized customization of smartphone application interface and enhance application using efficiency.

P3: a practice focused learning environment

NASA Astrophysics Data System (ADS)

Irving, Paul W.; Obsniuk, Michael J.; Caballero, Marcos D.

2017-09-01

There has been an increased focus on the integration of practices into physics curricula, with a particular emphasis on integrating computation into the undergraduate curriculum of scientists and engineers. In this paper, we present a university-level, introductory physics course for science and engineering majors at Michigan State University called P3 (projects and practices in physics) that is centred around providing introductory physics students with the opportunity to appropriate various science and engineering practices. The P3 design integrates computation with analytical problem solving and is built upon a curriculum foundation of problem-based learning, the principles of constructive alignment and the theoretical framework of community of practice. The design includes an innovative approach to computational physics instruction, instructional scaffolds, and a unique approach to assessment that enables instructors to guide students in the development of the practices of a physicist. We present the very positive student related outcomes of the design gathered via attitudinal and conceptual inventories and research interviews of students’ reflecting on their experiences in the P3 classroom.

Design guidelines for assessing and controlling spacecraft charging effects

NASA Technical Reports Server (NTRS)

Purvis, C. K.; Garrett, H. B.; Whittlesey, A. C.; Stevens, N. J.

1984-01-01

The need for uniform criteria, or guidelines, to be used in all phases of spacecraft design is discussed. Guidelines were developed for the control of absolute and differential charging of spacecraft surfaces by the lower energy space charged particle environment. Interior charging due to higher energy particles is not considered. A guide to good design practices for assessing and controlling charging effects is presented. Uniform design practices for all space vehicles are outlined.

Design guidelines for assessing and controlling spacecraft charging effects

NASA Technical Reports Server (NTRS)

Purvis, C. K.; Garrett, H. B.; Whittlesey, A.; Stevens, N. J.

1985-01-01

The need for uniform criteria, or guidelines, to be used in all phases of spacecraft design is discussed. Guidelines were developed for the control of absolute and differential charging of spacecraft surfaces by the lower energy space charged particle environment. Interior charging due to higher energy particles is not considered. A guide to good design practices for assessing and controlling charging effects is presented. Uniform design practices for all space vehicles are outlined.

Assuring data transparency through design methodologies

NASA Technical Reports Server (NTRS)

Williams, Allen

1990-01-01

This paper addresses the role of design methodologies and practices in the assurance of technology transparency. The development of several subsystems on large, long life cycle government programs was analyzed to glean those characteristics in the design, development, test, and evaluation that precluded or enabled the insertion of new technology. The programs examined were Minuteman, DSP, B1-B, and space shuttle. All these were long life cycle, technology-intensive programs. The design methodologies (or lack thereof) and design practices for each were analyzed in terms of the success or failure in incorporating evolving technology. Common elements contributing to the success or failure were extracted and compared to current methodologies being proposed by the Department of Defense and NASA. The relevance of these practices to the design and deployment of Space Station Freedom were evaluated. In particular, appropriate methodologies now being used on the core development contract were examined.

Online interprofessional health sciences education: From theory to practice.

PubMed

Luke, Robert; Solomon, Patty; Baptiste, Sue; Hall, Pippa; Orchard, Carole; Rukholm, Ellen; Carter, Lorraine

2009-01-01

Online learning (e-learning) has a nascent but established history. Its application to interprofessional education (IPE), however, is relatively new. Over the past 2 decades the Internet has been used increasingly to mediate education. We have come past the point of "should we use the Internet for education" to "how should we use the Internet for education." Research has begun on the optimal development of online learning environments to support IPE. Developing online IPE should follow best practices in e-learning generally, though there are some special considerations for acknowledging the interprofessional context and clinical environments that online IPE is designed to support. The design, development, and deployment of effective online IPE must therefore pay special attention to the particular constraints of the health care worker educational matrix, both pre- and postlicensure. In this article we outline the design of online, interprofessional health sciences education. Our work has involved 4 educational and 4 clinical service institutions. We establish the context in which we situate our development activities that created learning modules designed to support IPE and its transfer into new interprofessional health care practices. We illustrate some best practices for the design of effective online IPE, and show how this design can create effective learning for IPE. Challenges exist regarding the full implementation of interprofessional clinical practice that are beginning to be met by coordinated efforts of multiple health care education silos.

40 CFR 60.634 - Alternative means of emission limitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... any design, equipment, work practice or operational standard, the Administrator will publish, in the... the design, equipment, work practice or operational standard. ... applications under this section from either owners or operators of affected facilities, or manufacturers of...

Construction, Part of Indoor Air Quality Design Tools for Schools

EPA Pesticide Factsheets

Poor job-site construction practices can frustrate even the best design by allowing moisture and other contaminants to become potential long term problems. Preventive job-site practices will reduce the potential for residual problems with IAQ

Evaluation of Long-Life Concrete Pavement Practices for Use in Florida

DOT National Transportation Integrated Search

2012-11-01

Current Florida construction practices produce asphalt pavements with a service life of 12 to 20 years before needing rehabilitation; concrete pavements are typically designed for 20 years. However, pavements with much longer design lives are possibl...

With Educational Benefits for All: Campus Inclusion through Learning Communities Designed for Underserved Student Populations

ERIC Educational Resources Information Center

Fink, John E.; Hummel, Mary L.

2015-01-01

This chapter explores the practices of learning communities designed for specific, underserved student populations, highlighting on-campus examples and culminating with a synthesized list of core practices from these "inclusive" learning communities.

The Experience of Condom Use and Other Sexual Risk Practices among Male Brewery Employees Who Recently Migrated in Nigeria

ERIC Educational Resources Information Center

Sunmola, Adegbenga M; Adebayo, Dada; Olapegba, Makinde; Alarape, Aderemi

2006-01-01

Objective: To identify factors that predict condom use and sexual practices of brewery employees who had recently been on short- and longterm migration in the course of their jobs in Nigeria. Design: A cross-sectional survey design was adopted to investigate the relationship between sexual practices and condom use of migrant employees, and to…

The eLIDA CAMEL Nomadic Model of Collaborative Partnership for a Community of Practice in Design for Learning

ERIC Educational Resources Information Center

Jameson, Jill

2008-01-01

A nomadic collaborative partnership model for a community of practice (CoP) in Design for Learning (D4L) can facilitate successful innovation and continuing appraisals of effective professional practice, stimulated by a "critical friend" assigned to the project. This paper reports on e-learning case studies collected by the UK JISC eLIDA…

What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London.

PubMed

Lennox, Laura; Doyle, Cathal; Reed, Julie E; Bell, Derek

2017-09-24

Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). CLAHRC NWL improvement initiative teams and staff. The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with the method over time. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Critique of a practice-based pilot study in chiropractic practices in Western Australia.

PubMed

Amorin-Woods, Lyndon G; Parkin-Smith, Gregory F; Nedkoff, Lee; Fisher, Colleen

2016-01-01

Practice-based data collection can offer insight into the nature of chiropractic practice and contribute to resolving the conundrum of the chiropractic profession's role in contemporary healthcare, subsequently informing care service policy. However, there is little formal data available about chiropractic practice to inform decision-makers about the nature and role of chiropractic within the context of a modern multidisciplinary healthcare context in Australia, particularly at a local and regional level. This was a mixed-methods data transformation model (qualitative to quantitative) pilot study the purpose of which was to provide a critique of the research design and collect data from a selected sample of chiropractic practices in Western Australia, with a view to offer recommendations related to the design, feasibility and implementation of a future confirmatory study. A narrative critique of the research methods of this pilot study is offered in this paper covering: (a) practice and patient recruitment, (b) enrollment of patients, (c) data collection methods, (d) acceptability of the study methods, (e) sample size calculations, and (f) design critique. The result of this critique provides a sensible sample size estimate and recommendations as to the design and implementation of a future confirmatory study. Furthermore, we believe that a confirmatory study is not only feasible, but indeed necessary, with a view to offer meaningful insight into chiropractic practice in Western Australia. ACTRN12616000434493 Australian New Zealand Clinical Trials Registry (ANZCTR). Registered 5 April 2016. First participant enrolled 01 July 2014, retrospectively registered.

Baby-Friendly Practices Minimize Newborn Infants Weight Loss.

PubMed

Procaccini, Diane; Curley, Ann L Cupp; Goldman, Martha

2018-04-01

It is accepted that newborns lose weight in the first few days of life. Baby-Friendly practices that support breastfeeding may affect newborn weight loss. The objective of this study were: 1) To determine whether Baby-Friendly practices are associated with term newborn weight loss day 0-2 in three feeding categories (exclusively breastfed, mixed formula fed and breastfed, and formula fed). 2) To determine whether Baby-Friendly practices increase exclusive breast feeding rates in different ethnic populations. This was a retrospective case-control study. Term newborn birth weight, neonatal weights days 0-2, feeding type, type of birth, and demographic information were collected for 1,000 births for the year before Baby-Friendly designation (2010) and 1,000 in 2013 (after designation). Ultimately 683 in the first group and 518 in the second met the inclusion criteria. Mean weight loss decreased day 0-2 for infants in all feeding types after the initiation of Baby-Friendly practices. There was a statistically significant effect of Baby-Friendly designation on weight loss for day 0-2 in exclusively breastfed infants (p < 0.01) after controlling for birth weight. Exclusive breast feeding increased in all ethnic groups after Baby-Friendly practices were put in place. There was a decrease in mean weight loss day 0-2 regardless of feeding type after Baby-Friendly designation. Exclusive breast feeding increased in the presence of Baby-Friendly practices.

Proper Plugin Protocols

DTIC Science & Technology

2011-12-28

specify collaboration constraints that occur in Java and XML frameworks and that the collaboration constraints from these frameworks matter in practice. (a...programming language boundaries, and Chapter 6 and Appendix A demonstrate that Fusion can specify constraints across both Java and XML in practice. (c...designed JUnit, Josh Bloch designed Java Collec- tions, and Krzysztof Cwalina designed the .NET Framework APIs. While all of these frameworks are very

Feedback Practices and Signature Pedagogies: What Can the Liberal Arts Learn from the Design Critique?

ERIC Educational Resources Information Center

Schrand, Tom; Eliason, John

2012-01-01

To examine the differences between feedback practices in liberal arts courses and in design courses, we surveyed 373 students with experiences of both. Our study found that students perceived the feedback they received in design courses as more effective in advancing their learning, and that the emotional effects of feedback presented verbally and…

Landscaping on the new frontier: Waterwise design for the Intermountain West

Treesearch

Susan E. Meyer; Roger K. Kjelgren; Darrel G. Morrison; William A. Varga

2009-01-01

PLEASE NOTE: PDF IS ONLY A SAMPLE OF BOOK. A practical volume for the home or business owner on landscaping with native, drought-tolerant plants in the Rocky Mountain West. Filled with color illustrations, photos, and design sketches, over 100 native species are described, while practical tips on landscape design, water-wise irrigation, and keeping down the weeds are...

Current Approaches to the Assessment of Graphic Design in a Higher Education Context

ERIC Educational Resources Information Center

Giloi, Susan; du Toit, Pieter

2013-01-01

This article provides an overview of the current trends in assessment practice within the field of graphic design. The demands placed on educators to apply sound assessment practice for Higher Education subjects is as intense in the field of graphic design as in any other. Forcing the assessment of creative visual work into existing assessment…

Creativity and Conflict: How Theory and Practice Shape Student Identities in Design Education

ERIC Educational Resources Information Center

Tynan, Jane; New, Christopher

2009-01-01

By exploring the role of student identities in shaping attitudes to learning, this study asks how design students draw on experience to work across theory and practice. It explores how a specific group of design undergraduate students in a UK university perform on two distinct learning experiences on their course: work placement and dissertation.…

A Best Practice Modular Design of a Hybrid Course Delivery Structure for an Executive Education Program

ERIC Educational Resources Information Center

Klotz, Dorothy E.; Wright, Thomas A.

2017-01-01

This article highlights a best practice approach that showcases the highly successful deployment of a hybrid course delivery structure for an Operations core course in an Executive MBA Program. A key design element of the approach was the modular design of both the course itself and the learning materials. While other hybrid deployments may stress…

Engaging participants in a complex intervention trial in Australian General Practice

PubMed Central

Perkins, David; Harris, Mark F; Tan, Jocelyn; Christl, Bettina; Taggart, Jane; Fanaian, Mahnaz

2008-01-01

Background The paper examines the key issues experienced in recruiting and retaining practice involvement in a large complex intervention trial in Australian General Practice. Methods Reflective notes made by research staff and telephone interviews with staff from general practices which expressed interest, took part or withdrew from a trial of a complex general practice intervention. Results Recruitment and retention difficulties were due to factors inherent in the demands and context of general practice, the degree of engagement of primary care organisations (Divisions of General Practice), perceived benefits by practices, the design of the trial and the timing and complexity of data collection. Conclusion There needs to be clearer articulation to practices of the benefits of the research to participants and streamlining of the design and processes of data collection and intervention to fit in with their work practices. Ultimately deeper engagement may require additional funding and ongoing participation through practice research networks. Trial Registration Current Controlled Trials ACTRN12605000788673 PMID:18700984

Design of lane merges at rural freeway construction work zones.

DOT National Transportation Integrated Search

2012-10-01

Practices for the design and control of work zone traffic control configurations have evolved over time : to reflect safer and more efficient management practices. However, they are also recognized as areas : of frequent vehicle conflicts that can ca...

Evaluation of Long-Life Concrete Pavement Practices for Use in Florida : [Summary

DOT National Transportation Integrated Search

2012-01-01

Current Florida construction practices produce asphalt pavements with a service life of 12 to 20 years before needing rehabilitation; concrete pavements are typically designed for 20 years. However, pavements with much longer design lives are possibl...

Implementation of sustainable and green design and construction practices for bridges.

DOT National Transportation Integrated Search

2012-12-01

The focus of this research is to develop a framework for more sustainable design and construction : processes for new bridges, and sustainable maintenance practices for existing bridges. The framework : includes a green rating system for bridges. The...

The role of institutional design and organizational practice for health financing performance and universal coverage.

PubMed

Mathauer, Inke; Carrin, Guy

2011-03-01

Many low- and middle income countries heavily rely on out-of-pocket health care expenditure. The challenge for these countries is how to modify their health financing system in order to achieve universal coverage. This paper proposes an analytical framework for undertaking a systematic review of a health financing system and its performance on the basis of which to identify adequate changes to enhance the move towards universal coverage. The distinctive characteristic of this framework is the focus on institutional design and organizational practice of health financing, on which health financing performance is contingent. Institutional design is understood as formal rules, namely legal and regulatory provisions relating to health financing; organizational practice refers to the way organizational actors implement and comply with these rules. Health financing performance is operationalized into nine generic health financing performance indicators. Inadequate performance can be caused by six types of bottlenecks in institutional design and organizational practice. Accordingly, six types of improvement measures are proposed to address these bottlenecks. The institutional design and organizational practice of a health financing system can be actively developed, modified or strengthened. By understanding the incentive environment within a health financing system, the potential impacts of the proposed changes can be anticipated. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Labby, Z.

Physicists are often expected to have a solid grounding in experimental design and statistical analysis, sometimes filling in when biostatisticians or other experts are not available for consultation. Unfortunately, graduate education on these topics is seldom emphasized and few opportunities for continuing education exist. Clinical physicists incorporate new technology and methods into their practice based on published literature. A poor understanding of experimental design and analysis could Result in inappropriate use of new techniques. Clinical physicists also improve current practice through quality initiatives that require sound experimental design and analysis. Academic physicists with a poor understanding of design and analysismore » may produce ambiguous (or misleading) results. This can Result in unnecessary rewrites, publication rejection, and experimental redesign (wasting time, money, and effort). This symposium will provide a practical review of error and uncertainty, common study designs, and statistical tests. Instruction will primarily focus on practical implementation through examples and answer questions such as: where would you typically apply the test/design and where is the test/design typically misapplied (i.e., common pitfalls)? An analysis of error and uncertainty will also be explored using biological studies and associated modeling as a specific use case. Learning Objectives: Understand common experimental testing and clinical trial designs, what questions they can answer, and how to interpret the results Determine where specific statistical tests are appropriate and identify common pitfalls Understand the how uncertainty and error are addressed in biological testing and associated biological modeling.« less

Psychometric testing on the NLN Student Satisfaction and Self-Confidence in Learning, Simulation Design Scale, and Educational Practices Questionnaire using a sample of pre-licensure novice nurses.

PubMed

Franklin, Ashley E; Burns, Paulette; Lee, Christopher S

2014-10-01

In 2006, the National League for Nursing published three measures related to novice nurses' beliefs about self-confidence, scenario design, and educational practices associated with simulation. Despite the extensive use of these measures, little is known about their reliability and validity. The psychometric properties of the Student Satisfaction and Self-Confidence in Learning Scale, Simulation Design Scale, and Educational Practices Questionnaire were studied among a sample of 2200 surveys completed by novice nurses from a liberal arts university in the southern United States. Psychometric tests included item analysis, confirmatory and exploratory factor analyses in randomly-split subsamples, concordant and discordant validity, and internal consistency. All three measures have sufficient reliability and validity to be used in education research. There is room for improvement in content validity with the Student Satisfaction and Self-Confidence in Learning and Simulation Design Scale. This work provides robust evidence to ensure that judgments made about self-confidence after simulation, simulation design and educational practices are valid and reliable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Nurses' Perspectives on the Geriatric Nursing Practice Environment and the Quality of Older People's Care in Ontario Acute Care Hospitals.

PubMed

Fox, Mary T; Sidani, Souraya; Butler, Jeffrey I; Tregunno, Deborah

2017-06-01

Background Cultivating hospital environments that support older people's care is a national priority. Evidence on geriatric nursing practice environments, obtained from studies of registered nurses (RNs) in American teaching hospitals, may have limited applicability to Canada, where RNs and registered practical nurses (RPNs) care for older people in predominantly nonteaching hospitals. Purpose This study describes nurses' perceptions of the overall quality of care for older people and the geriatric nursing practice environment (geriatric resources, interprofessional collaboration, and organizational value of older people's care) and examines if these perceptions differ by professional designation and hospital teaching status. Methods A cross-sectional survey, using Dillman's tailored design, that included Geriatric Institutional Assessment Profile subscales, was completed by 2005 Ontario RNs and registered practical nurses to assess their perceptions of the quality of care and geriatric nursing practice environment. Results Scores on the Geriatric Institutional Assessment Profile subscales averaged slightly above the midpoint except for geriatric resources which was slightly below. Registered practical nurses rated the quality of care and geriatric nursing practice environment higher than RNs; no significant differences were found by hospital teaching status. Conclusions Nurses' perceptions of older people's care and the geriatric nursing practice environment differ by professional designation but not hospital teaching status. Teaching and nonteaching hospitals should both be targeted for geriatric nursing practice environment improvement initiatives.

Optical design applications for enhanced illumination performance

NASA Astrophysics Data System (ADS)

Gilray, Carl; Lewin, Ian

1995-08-01

Nonimaging optical design techniques have been applied in the illumination industry for many years. Recently however, powerful software has been developed which allows accurate simulation and optimization of illumination devices. Wide experience has been obtained in using such design techniques for practical situations. These include automotive lighting where safety is of greatest importance, commercial lighting systems designed for energy efficiency, and numerous specialized applications. This presentation will discuss the performance requirements of a variety of illumination devices. It will further cover design methodology and present a variety of examples of practical applications for enhanced system performance.

Assessing the Impact of a Program Designed to Develop Sustainability Leadership amongst Staff Members in Higher Education Institutes: A Case Study from a Community of Practice Perspective

ERIC Educational Resources Information Center

Alkaher, Iris; Avissar, Ilana

2018-01-01

This study focuses on the impact of a sustainability leadership development program (SLDP) designed to develop staff members as leaders who encourage sustainability practices within institutions of higher education (IHE). Using the framework of community of practice (CoP), we explored the program's contribution by interviewing 16 staff members who…

The Effectiveness of Professional Development Using a Checklist of Common Core State Standards for Mathematical Practice for Designing and Delivering Instruction on Algebra I Achievement

ERIC Educational Resources Information Center

Peretin, Janeen

2014-01-01

This study was designed to determine whether or not the use of focused professional development using a checklist based on the Common Core State Standards Mathematical Practices impacted students' math scores as measured by an assessment that requires the use of the practices. Additionally, the researcher sought to determine whether or not the use…

Proactive approaches for mold-free interior environments.

PubMed

Warsco, Katherine; Lindsey, Patricia F

2003-08-01

Interior design education and practice can contribute to the prevention of mold growth in indoor environments. The authors provide an overview of current thinking within the interior design educational and professional communities regarding proactive approaches to achieving mold-free building interiors, including identification of current best practices for the prevention of mold problems in buildings. They also discuss the development of certification programs. A review of recent literature points to the need for interior designers to be educated to specify the use of ecologically sound materials that support the health of building occupants. The authors present trade-offs between best practices for designing mold-free indoor environments (including considerations of cost, maintenance, and operation) and occupant comfort, health, and well-being.

Design of a multifaceted referral equine hospital.

PubMed

Bousum, Peter C

2009-12-01

There is no simple recipe for designing a multifaceted practice. However, keys to any design are the devotion of the people involved and proper positioning of such people in the organization. Anyone designing such a practice also must pay keen attention to details and a keep a finger constantly on the pulse of the business to ensure that it maintains a sound financial footing and a consistent vision. Little money is made from savings or pushing financials. Profits come mainly through building additional sales, maintaining a clear vision, and making shrewd investments. Like for every small business, success in the multifaceted practice is clearly tied to such factors as financial acumen, forward thinking, technology, lifestyle, vision, and a willingness to take a calculated risk.

Simultaneously optimizing dose and schedule of a new cytotoxic agent.

PubMed

Braun, Thomas M; Thall, Peter F; Nguyen, Hoang; de Lima, Marcos

2007-01-01

Traditionally, phase I clinical trial designs are based upon one predefined course of treatment while varying among patients the dose given at each administration. In actual medical practice, patients receive a schedule comprised of several courses of treatment, and some patients may receive one or more dose reductions or delays during treatment. Consequently, the overall risk of toxicity for each patient is a function of both actual schedule of treatment and the differing doses used at each adminstration. Our goal is to provide a practical phase I clinical trial design that more accurately reflects actual medical practice by accounting for both dose per administration and schedule. We propose an outcome-adaptive Bayesian design that simultaneously optimizes both dose and schedule in terms of the overall risk of toxicity, based on time-to-toxicity outcomes. We use computer simulation as a tool to calibrate design parameters. We describe a phase I trial in allogeneic bone marrow transplantation that was designed and is currently being conducted using our new method. Our computer simulations demonstrate that our method outperforms any method that searches for an optimal dose but does not allow schedule to vary, both in terms of the probability of identifying optimal (dose, schedule) combinations, and the numbers of patients assigned to those combinations in the trial. Our design requires greater sample sizes than those seen in traditional phase I studies due to the larger number of treatment combinations examined. Our design also assumes that the effects of multiple administrations are independent of each other and that the hazard of toxicity is the same for all administrations. Our design is the first for phase I clinical trials that is sufficiently flexible and practical to truly reflect clinical practice by varying both dose and the timing and number of administrations given to each patient.

The hardware and software implications of hospital birth room design: a midwifery perspective.

PubMed

Hammond, Athena; Foureur, Maralyn; Homer, Caroline S E

2014-07-01

to explore the impacts of physical and aesthetic design of hospital birth rooms on midwives. the design of a workplace, including architecture, equipment, furnishings and aesthetics, can influence the experience and performance of staff. Some research has explored the effects of workplace design in health care environments but very little research has examined the impact of design on midwives working in hospital birth rooms. a video ethnographic study was undertaken and the labours of six women cared for by midwives were filmed. Filming took place in one birth centre and two labour wards within two Australian hospitals. Subsequently, eight midwives participated in video-reflexive interviews whilst viewing the filmed labour of the woman for whom they provided care. Thematic analysis of the midwife interviews was undertaken. midwives were strongly affected by the design of the birth room. Four major themes were identified: finding a space amongst congestion and clutter; trying to work underwater; creating ambience in a clinical space and being equipped for flexible practice. Aesthetic features, room layout and the design of equipment and fixtures all impacted on the midwives and their practice in both birth centre and labour ward settings. the current design of many hospital birth rooms challenges the provision of effective midwifery practice. Changes to the design and aesthetics of the hospital birth room may engender safer, more comfortable and more effective midwifery practice. Copyright © 2013 Elsevier Ltd. All rights reserved.

Changing corporate practices to reduce cancer disparities.

PubMed

Freudenberg, Nicholas; Galea, Sandro; Fahs, Marianne

2008-02-01

While reducing racial/ethnic and socioeconomic disparities in cancer mortality has been identified as a national goal, current policies are unlikely to achieve it. In order to advance the development of policies for the primary prevention of cancer and cancer disparities, we propose that the practices of the tobacco, alcohol, and food industries be considered as modifiable social determinants of health. We review evidence that the practices of these industries in product design, marketing, retail distribution, and pricing contribute to cancer risk behavior, incidence, and disparities, then examine public health strategies designed to reduce health-damaging practices of these industries and encourage healthier alternatives. We conclude with recommendations for research, practice, and policy that could contribute to the development of less carcinogenic corporate practices.

A Study of Vehicle Structural Layouts in Post-WWII Aircraft

NASA Technical Reports Server (NTRS)

Sensmeier, Mark D.; Samareh, Jamshid A.

2004-01-01

In this paper, results of a study of structural layouts of post-WWII aircraft are presented. This study was undertaken to provide the background information necessary to determine typical layouts, design practices, and industry trends in aircraft structural design. Design decisions are often predicated not on performance-related criteria, but rather on such factors as manufacturability, maintenance access, and of course cost. For this reason, a thorough understanding of current best practices in the industry is required as an input for the design optimization process. To determine these best practices and industry trends, a large number of aircraft structural cutaway illustrations were analyzed for five different aircraft categories (commercial transport jets, business jets, combat jet aircraft, single engine propeller aircraft, and twin-engine propeller aircraft). Several aspects of wing design and fuselage design characteristics are presented here for the commercial transport and combat aircraft categories. A great deal of commonality was observed for transport structure designs over a range of eras and manufacturers. A much higher degree of variability in structural designs was observed for the combat aircraft, though some discernable trends were observed as well.

Social Constructivist Learning Environment in an Online Professional Practice Course

PubMed Central

Sakulbumrungsil, Rungpetch; Theeraroungchaisri, Anuchai; Watcharadamrongkun, Suntaree

2009-01-01

Objective To assess the online social constructivist learning environment (SCLE) and student perceptions of the outcomes of the online introductory module of pharmacy professional practice that was designed based on social constructivism theory. Design The online introductory module of pharmacy professional practice in pharmaceutical marketing and business was carefully designed by organizing various activities, which were intended to encourage social interaction among students. The Constructivist Online Learning Environment Survey (COLLES) was applied to assess the SCLE. Course evaluation questionnaires were administered to assess student perceptions of this online module. Assessment The result from the COLLES illustrated the development of SCLE in the course. The students reported positive perceptions of the course. Conclusion An online introductory module of pharmacy professional practice in pharmaceutical marketing and business was effective in promoting SCLE. PMID:19513147

Design of Mobile Augmented Reality in Health Care Education: A Theory-Driven Framework.

PubMed

Zhu, Egui; Lilienthal, Anneliese; Shluzas, Lauren Aquino; Masiello, Italo; Zary, Nabil

2015-09-18

Augmented reality (AR) is increasingly used across a range of subject areas in health care education as health care settings partner to bridge the gap between knowledge and practice. As the first contact with patients, general practitioners (GPs) are important in the battle against a global health threat, the spread of antibiotic resistance. AR has potential as a practical tool for GPs to combine learning and practice in the rational use of antibiotics. This paper was driven by learning theory to develop a mobile augmented reality education (MARE) design framework. The primary goal of the framework is to guide the development of AR educational apps. This study focuses on (1) identifying suitable learning theories for guiding the design of AR education apps, (2) integrating learning outcomes and learning theories to support health care education through AR, and (3) applying the design framework in the context of improving GPs' rational use of antibiotics. The design framework was first constructed with the conceptual framework analysis method. Data were collected from multidisciplinary publications and reference materials and were analyzed with directed content analysis to identify key concepts and their relationships. Then the design framework was applied to a health care educational challenge. The proposed MARE framework consists of three hierarchical layers: the foundation, function, and outcome layers. Three learning theories-situated, experiential, and transformative learning-provide foundational support based on differing views of the relationships among learning, practice, and the environment. The function layer depends upon the learners' personal paradigms and indicates how health care learning could be achieved with MARE. The outcome layer analyzes different learning abilities, from knowledge to the practice level, to clarify learning objectives and expectations and to avoid teaching pitched at the wrong level. Suggestions for learning activities and the requirements of the learning environment form the foundation for AR to fill the gap between learning outcomes and medical learners' personal paradigms. With the design framework, the expected rational use of antibiotics by GPs is described and is easy to execute and evaluate. The comparison of specific expected abilities with the GP personal paradigm helps solidify the GP practical learning objectives and helps design the learning environment and activities. The learning environment and activities were supported by learning theories. This paper describes a framework for guiding the design, development, and application of mobile AR for medical education in the health care setting. The framework is theory driven with an understanding of the characteristics of AR and specific medical disciplines toward helping medical education improve professional development from knowledge to practice. Future research will use the framework as a guide for developing AR apps in practice to validate and improve the design framework.

Design of Mobile Augmented Reality in Health Care Education: A Theory-Driven Framework

PubMed Central

Lilienthal, Anneliese; Shluzas, Lauren Aquino; Masiello, Italo; Zary, Nabil

2015-01-01

Background Augmented reality (AR) is increasingly used across a range of subject areas in health care education as health care settings partner to bridge the gap between knowledge and practice. As the first contact with patients, general practitioners (GPs) are important in the battle against a global health threat, the spread of antibiotic resistance. AR has potential as a practical tool for GPs to combine learning and practice in the rational use of antibiotics. Objective This paper was driven by learning theory to develop a mobile augmented reality education (MARE) design framework. The primary goal of the framework is to guide the development of AR educational apps. This study focuses on (1) identifying suitable learning theories for guiding the design of AR education apps, (2) integrating learning outcomes and learning theories to support health care education through AR, and (3) applying the design framework in the context of improving GPs’ rational use of antibiotics. Methods The design framework was first constructed with the conceptual framework analysis method. Data were collected from multidisciplinary publications and reference materials and were analyzed with directed content analysis to identify key concepts and their relationships. Then the design framework was applied to a health care educational challenge. Results The proposed MARE framework consists of three hierarchical layers: the foundation, function, and outcome layers. Three learning theories—situated, experiential, and transformative learning—provide foundational support based on differing views of the relationships among learning, practice, and the environment. The function layer depends upon the learners’ personal paradigms and indicates how health care learning could be achieved with MARE. The outcome layer analyzes different learning abilities, from knowledge to the practice level, to clarify learning objectives and expectations and to avoid teaching pitched at the wrong level. Suggestions for learning activities and the requirements of the learning environment form the foundation for AR to fill the gap between learning outcomes and medical learners’ personal paradigms. With the design framework, the expected rational use of antibiotics by GPs is described and is easy to execute and evaluate. The comparison of specific expected abilities with the GP personal paradigm helps solidify the GP practical learning objectives and helps design the learning environment and activities. The learning environment and activities were supported by learning theories. Conclusions This paper describes a framework for guiding the design, development, and application of mobile AR for medical education in the health care setting. The framework is theory driven with an understanding of the characteristics of AR and specific medical disciplines toward helping medical education improve professional development from knowledge to practice. Future research will use the framework as a guide for developing AR apps in practice to validate and improve the design framework. PMID:27731839

Teachers' Practices of Inquiry When Teaching Investigations: A Case Study

ERIC Educational Resources Information Center

Dudu, Washington T.; Vhurumuku, Elaosi

2012-01-01

Teacher practices are essential for supporting learners in scientific inquiry practices of framing research questions, designing and conducting investigations, collecting data, and drawing conclusions. This study examines instructional practices of two Grade 11 Physical Science teachers engaged in teaching practical investigations. Data were…

Contextual Shaping of Student Design Practices: The Role of Constraint in First-Year Engineering Design

NASA Astrophysics Data System (ADS)

Goncher, Andrea M.

thResearch on engineering design is a core area of concern within engineering education, and a fundamental understanding of how engineering students approach and undertake design is necessary in order to develop effective design models and pedagogies. This dissertation contributes to scholarship on engineering design by addressing a critical, but as yet underexplored, problem: how does the context in which students design shape their design practices? Using a qualitative study comprising of video data of design sessions, focus group interviews with students, and archives of their design work, this research explored how design decisions and actions are shaped by context, specifically the context of higher education. To develop a theoretical explanation for observed behavior, this study used the nested structuration. framework proposed by Perlow, Gittell, & Katz (2004). This framework explicated how teamwork is shaped by mutually reinforcing relationships at the individual, organizational, and institutional levels. I appropriated this framework to look specifically at how engineering students working on a course-related design project identify constraints that guide their design and how these constraints emerge as students interact while working on the project. I first identified and characterized the parameters associated with the design project from the student perspective and then, through multi-case studies of four design teams, I looked at the role these parameters play in student design practices. This qualitative investigation of first-year engineering student design teams revealed mutual and interconnected relationships between students and the organizations and institutions that they are a part of. In addition to contributing to research on engineering design, this work provides guidelines and practices to help design educators develop more effective design projects by incorporating constraints that enable effective design and learning. Moreover, I found that when appropriated in the context of higher education, multiple sublevels existed within nested structuration's organizational context and included course-level and project-level factors. The implications of this research can be used to improve the design of engineering course projects as well as the design of research efforts related to design in engineering education.

Perceptions of Pre-Service Teachers on the Design of a Learning Environment Based on the Seven Principles of Good Practice

ERIC Educational Resources Information Center

Al-Furaih, Suad Abdul Aziz

2017-01-01

This study explored the perceptions of 88 pre-service teachers on the design of a learning environment using the Seven Principles of Good Practice and its effect on participants' abilities to create their Cloud Learning Environment (CLE). In designing the learning environment, a conceptual model under the name 7 Principles and Integrated Learning…

What Can "Social Practice" Theory and "Socio-Cultural" Theory Contribute to Our Understanding of the Processes of Module Design?

ERIC Educational Resources Information Center

Binns, Carole

2015-01-01

This article discusses the data obtained from an online survey of academic staff who are involved in module design and who are employed within one university. The survey was used as a baselining tool to explore the nature of current module design practice within the survey sample. Do academics consistently employ the pragmatic approaches…

Practical optimal flight control system design for helicopter aircraft. Volume 1: Technical Report

NASA Technical Reports Server (NTRS)

Hofmann, L. G.; Riedel, S. A.; Mcruer, D.

1980-01-01

A method by which modern and classical theory techniques may be integrated in a synergistic fashion and used in the design of practical flight control systems is presented. A general procedure is developed, and several illustrative examples are included. Emphasis is placed not only on the synthesis of the design, but on the assessment of the results as well.

Logos: the emblem in the marketing wars.

PubMed

Chan, S D

1994-07-01

The logo is a powerful marketing tool. It is a condensed form of communication for a selected niche in a mass audience. Effective logo design principles include considerations of art design, visual perception, memory retention, and succinct nonverbal communication. Design principles for logos for dental practices are presented. Dental practices may realize significant advantages if logos are properly conceived and executed and are creatively implemented.

Liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. [design techniques and practices

NASA Technical Reports Server (NTRS)

1973-01-01

The development of and operational programs for effective use in design are presented for liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. A review of the total design problem is presented, and design elements are identified which are involved in successful design. Current technology pertaining to these elements is also described. Design criteria are presented which state what rule or standard must be imposed on each essential design element to assure successful design. These criteria serve as a checklist of rules for a project manager to use in guiding a design or in assessing its adequacy. Recommended practices are included which state how to satisfy each of the criteria.

Review of Environmental Consequences of Waterway Design and Construction Practices as of 1979.

DTIC Science & Technology

1982-04-01

AD-A118 07Th VANDERISILT UNIV NASHVILLE I TN F/ ,2 REVIEW OF ENVIRONMENTAL CONSEQUENCES OF WATERWAY DESIGN AND CON-ETC(U U CLASSIFIED APR 82 E L... DESIGN AND CONSTRUCTION PRACTICES AS OF 1979 8. PERFORMING ORG. REPORT NUMEER 7. AUTHOR(q) S. CONTRACT OR GRANT NUMUER(t) Edward L. Thackston...numF*-" a I~mOlPi lt block ninr) >. Waterway projects designed and constructed by the Corps of Engineers (CE) include dikes, revetments, levees, and

Making microbiology of the built environment relevant to design.

PubMed

Brown, G Z; Kline, Jeff; Mhuireach, Gwynne; Northcutt, Dale; Stenson, Jason

2016-02-16

Architects are enthusiastic about "bioinformed design" as occupant well-being is a primary measure of architectural success. However, architects are also under mounting pressure to create more sustainable buildings. Scientists have a critical opportunity to make the emerging field of microbiology of the built environment more relevant and applicable to real-world design problems by addressing health and sustainability in tandem. Practice-based research, which complements evidence-based design, represents a promising approach to advancing knowledge of the indoor microbiome and translating it to architectural practice.

The use of instructional design guidelines to increase effectiveness of postpartum hemorrhage simulation training.

PubMed

de Melo, Brena C P; Falbo, Ana R; Muijtjens, Arno M M; van der Vleuten, Cees P M; van Merriënboer, Jeroen J G

2017-04-01

To compare learning outcomes of postpartum hemorrhage simulation training based on either instructional design guidelines or best practice. A pretest-post-test non-equivalent groups study was conducted among obstetrics and gynecology residents in Recife, Brazil, from June 8 to August 30, 2013. The instructional design group included 13 teams, whereas the best practice group included seven teams. A standardized task checklist was used for scenario analysis and the proportion of correctly executed tasks compared (post-test minus pretest). The instructional design group scored higher than the best practice group for total number of tasks completed (median difference 0.46 vs 0.17; P<0.001; effect size [r]=0.72). Similar results were observed for communication (median difference 0.56 vs 0.22; P=0.004; r=0.58), laboratory evaluation (median difference 0.83 vs 0.00; P<0.001; r=0.76), and mechanical management (median difference 0.25 vs -0.15; P=0.048; r=0.39). Speed of learning was also increased. The median differences were 0.20 for the instructional design group compared with 0.05 for the best practice group at 60 seconds (P=0.015; r=0.49), and 0.49 versus 0.26 (P=0.001; r=0.65) at 360 seconds. The use of simulation training for postpartum hemorrhage that was based on instructional design guidelines yielded better learning outcomes than did training based on best practice. © 2016 International Federation of Gynecology and Obstetrics.

State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

DOT National Transportation Integrated Search

2012-08-01

The following document is the summary of results from a survey that was conducted to evaluate the state-of-the-practice for sediment basin design, construction, maintenance, and inspection procedures by State Highway Agencies (SHAs) across the nation...

State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

DOT National Transportation Integrated Search

2012-08-01

The following document is the summary of results from a survey that was conducted to evaluate : the state-of-the-practice for sediment basin design, construction, maintenance, and inspection : procedures by State Highway Agencies (SHAs) across the na...

75 FR 58016 - Consensus Standards, Standard Practice for Design, Alteration, and Certification of Airplane...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Consensus Standards, Standard... announces the availability of consensus standards and the Federal Aviation Administration (FAA) intention to accept the ASTM International's F2639-07 Standard Practice for Design, Alteration, and Certification of...

Evidence-Centered Design: Recommendations for Implementation and Practice

ERIC Educational Resources Information Center

Hendrickson, Amy; Ewing, Maureen; Kaliski, Pamela; Huff, Kristen

2013-01-01

Evidence-centered design (ECD) is an orientation towards assessment development. It differs from conventional practice in several ways and consists of multiple activities. Each of these activities results in a set of useful documentation: domain analysis, domain modeling, construction of the assessment framework, and assessment…

49 CFR 240.125 - Criteria for testing knowledge.

Code of Federal Regulations, 2010 CFR

2010-10-01

... practices for the safe operation of trains. (c) The testing methods selected by the railroad shall be: (1) Designed to examine a person's knowledge of the railroad's rules and practices for the safe operation of...) Personal safety practices; (ii) Operating practices; (iii) Equipment inspection practices; (iv) Train...

Pattern-Based Design of Insider Threat Programs

DTIC Science & Technology

2014-12-01

also applied these models to develop best practices and technical controls for mitigating insider threat. In some cases of in- sider threat...departing insiders might take valuable IP with them. One set of practices and controls designed to reduce the risk of insider IP theft is based on case data...describing this set of practices and controls helps to balance the costs of monitoring employee behavior for suspicious actions against the risk of

Enhancing the hermeneutic single-case efficacy design: Bridging the research-practice gap.

PubMed

Wall, Jessie M; Kwee, Janelle L; Hu, Monica; McDonald, Marvin J

2017-09-01

Systematic case study designs are emerging as alternative paradigm strategies for psychotherapy and social science research. Through enhanced sensitivity to context, these designs examine idiographic profiles of causal processes. We specifically advocate the use of the hermeneutic single-case efficacy design (HSCED). HSCED has recently been used to investigate the efficacy of an existing therapy with a new population (Observed and Experiential Integration for athlete performance barriers) and an emerging therapy (Lifespan Integration Therapy). We describe innovations in HSCED that were implemented for these studies. These developments include (a) integrating psychotherapists as case developers, (b) incorporating multiple cases in one investigation, and (c) tailoring the repertoire of assessment tools. These extensions strategically incorporated principles of contextual paradigms in HSCED, thus complementing single-case designs that neglect idiographic contexts. We discuss recommendations for using HSCED in practice-based research, highlighting its potential as a bridge to address the research-practice gap.

A Phenomenological Study of the Office Environments of Clinical Social Workers.

PubMed

Jones, Jamie K

2018-01-01

The purpose of this study was to explore the meaning and uses of the office space among licensed clinical social workers in private practice. Previous research suggests the importance of the office space in clinical practice in regard to therapeutic alliance, client behavior, and the well-being of the therapist. However, therapist offices contain much variation in design. This study looked further into specifically how the therapy room is important through the perspective of the licensed clinical social workers in order to identify common themes. Seven licensed clinical social workers in private psychotherapy practice were interviewed in their offices. Phenomenological research methods were used to explore and analyze their experiences. While the offices contained many physical differences, the intentions behind the designs were similar. Three themes emerged regarding how participants used and designed their spaces. First, participants used their offices to provide care for clients and themselves. Second, participants used their spaces to communicate therapeutic messages and to reveal and/or conceal aspects of themselves. Third, participants also used their space in direct practice. This phenomenological study provided insight into the importance and use of the psychotherapy office space. These findings may be helpful for therapists designing or redesigning their own practice spaces.

Laboratory Practical Exams in the Biochemistry Lab Course.

ERIC Educational Resources Information Center

Robyt, John F.; White, Bernard J.

1990-01-01

Described are the composition, design, administration, and evaluation of practical examinations. A table of the composition of biochemical unknowns for analysis in practical examinations is included. (CW)

Gathering Requirements for Teacher Tools: Strategies for Empowering Teachers Through Co-Design

NASA Astrophysics Data System (ADS)

Matuk, Camillia; Gerard, Libby; Lim-Breitbart, Jonathan; Linn, Marcia

2016-02-01

Technology can enhance teachers' practice in multiple ways. It can help them better understand patterns in their students' thinking, manage class progress at individual and group levels, and obtain evidence to inform modifications to curriculum and instruction. Such technology is most effective when it is aligned with teachers' goals and expectations. Participatory methods, which involve teachers closely in the design process, are widely recommended for establishing accurate design requirements that address users' needs. By collaborating with researchers, teachers can contribute their professional expertise to shape the tools of their practice, and ultimately ensure their sustained use. However, there is little guidance available for maintaining effective teacher-researcher design partnerships. We describe four strategies for engaging teachers in designing tools intended to support and enhance their practice within a web-based science learning environment: discussing physical artifacts, reacting to scenarios, customizing prototypes, and writing user stories. Using design artifacts and documents of teachers' reflections, we illustrate how we applied these techniques over 5 years of annual professional development workshops, and examine their affordances for eliciting teachers' ideas. We reflect on how these approaches have helped inform technology refinements and innovations. We moreover discuss the further benefits these strategies have had in encouraging teachers to reflect on their own practice and on the roles of technology in supporting it; and in allowing researchers to gain a deeper understanding of the relationship between technology, teaching, and design.

Measurement Practice Guide

ERIC Educational Resources Information Center

College and Career Readiness and Success Center, 2014

2014-01-01

This discussion guide is part of a larger practice guide designed to help state education agencies (SEAs) define measurement goals, select college and career readiness measures and indicators designed to support those goals, and use the data gathered with those measures and indicators to make informed decisions about college and career readiness…

Best Practices for Online Business Education

ERIC Educational Resources Information Center

Grandzol, John R.; Grandzol, Christian J.

2006-01-01

This integrative review of literature on online educational best practices is intended to provide a quick reference for those interested in designing online business courses and programs. Primarily American in its perspective, this review may be helpful for business schools seeking optimal online course designs that foster quality learning…

Characterization and development of truck load spectra and growth factors for current and future pavement design practices in Louisiana.

DOT National Transportation Integrated Search

2011-07-01

For pavement design practices, several factors must be considered to ensure good pavement performance over the anticipated life cycle. : Such factors include, but are not limited to, the type of paving materials, traffic loading characteristics, prev...

Reducing the Ecological Footprint of Pharmaceutical Usage: Linkages Between Healthcare Practices and the Environment

EPA Science Inventory

The design of pharmaceuticals and the practices surrounding the lifecycle of their manufacture and usage are central to minimize their impacts on the environment and increase the sustainability of healthcare. Cradle-to-cradle design, as conceptualized by McDonough and Braungart, ...

Engaging Students in Life and Literature: A Qualitative Study of Rural North Alabama Community College American Literature Instructors' Course Design and Pedagogical Practices

ERIC Educational Resources Information Center

Ward, Steven Jerome

2012-01-01

The purpose of this qualitative study was to examine the course design decisions and pedagogical practices of American literature teachers at three rural community colleges of varying size in North Alabama. Fink's (2003) Integrated Course Design (ICD) model provided a framework for this study, and the researcher attempted to determine if and to…

Job design, employment practices and well-being: a systematic review of intervention studies.

PubMed

Daniels, Kevin; Gedikli, Cigdem; Watson, David; Semkina, Antonina; Vaughn, Oluwafunmilayo

2017-09-01

There is inconsistent evidence that deliberate attempts to improve job design realise improvements in well-being. We investigated the role of other employment practices, either as instruments for job redesign or as instruments that augment job redesign. Our primary outcome was well-being. Where studies also assessed performance, we considered performance as an outcome. We reviewed 33 intervention studies. We found that well-being and performance may be improved by: training workers to improve their own jobs; training coupled with job redesign; and system wide approaches that simultaneously enhance job design and a range of other employment practices. We found insufficient evidence to make any firm conclusions concerning the effects of training managers in job redesign and that participatory approaches to improving job design have mixed effects. Successful implementation of interventions was associated with worker involvement and engagement with interventions, managerial commitment to interventions and integration of interventions with other organisational systems. Practitioner Summary: Improvements in well-being and performance may be associated with system-wide approaches that simultaneously enhance job design, introduce a range of other employment practices and focus on worker welfare. Training may have a role in initiating job redesign or augmenting the effects of job design on well-being.

Series: Pragmatic trials and real world evidence: Paper 1. Introduction.

PubMed

Zuidgeest, Mira G P; Goetz, Iris; Groenwold, Rolf H H; Irving, Elaine; van Thiel, Ghislaine J M W; Grobbee, Diederick E

2017-08-01

This is the introductory paper in a series of eight papers. In this series, we integrate the theoretical design options with the practice of conducting pragmatic trials. For most new market-approved treatments, the clinical evidence is insufficient to fully guide physicians and policy makers in choosing the optimal treatment for their patients. Pragmatic trials can fill this gap, by providing evidence on the relative effectiveness of a treatment strategy in routine clinical practice, already in an early phase of development, while maintaining the strength of randomized controlled trials. Selecting the setting, study population, mode of intervention, comparator, and outcome are crucial in designing pragmatic trials. In combination with monitoring and data collection that does not change routine care, this will enable appropriate generalization to the target patient group in clinical practice. To benefit from the full potential of pragmatic trials, there is a need for guidance and tools in designing these studies while ensuring operational feasibility. This paper introduces the concept of pragmatic trial design. The complex interplay between pragmatic design options, feasibility, stakeholder acceptability, validity, precision, and generalizability will be clarified. In this way, balanced design choices can be made in pragmatic trials with an optimal chance of success in practice. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

42 CFR 411.352 - Group practice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 2 2014-10-01 2014-10-01 false Group practice. 411.352 Section 411.352 Public... Entities Furnishing Designated Health Services § 411.352 Group practice. For purposes of this subpart, a group practice is a physician practice that meets the following conditions: (a) Single legal entity. The...

42 CFR 411.352 - Group practice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 2 2013-10-01 2013-10-01 false Group practice. 411.352 Section 411.352 Public... Entities Furnishing Designated Health Services § 411.352 Group practice. For purposes of this subpart, a group practice is a physician practice that meets the following conditions: (a) Single legal entity. The...

The confusion in complying with good manufacturing practice requirements in Malaysia

NASA Astrophysics Data System (ADS)

Jali, Mohd Bakri; Ghani, Maaruf Abdul; Nor, Norazmir Md

2016-11-01

Food manufacturing operations need to fulfil regulatory requirements related to hygiene and good manufacturing practices (GMP) to successfully market their products as safe and quality products. GMP based on its ten elements used as guidelines to ensure control over biological, chemical and physical hazards. This study aims to investigate the confusion for design and facilities elements among food industries. Both qualitative and quantitative techniques are used as systematic tools. Design and facilities elements lay a firm foundation for good manufacturing practice to ensure food hygiene and should be used in conjunction with each specific code of hygiene practice and guidelines.

The impact of the `Getting Practical: Improving Practical Work in Science' continuing professional development programme on teachers' ideas and practice in science practical work

NASA Astrophysics Data System (ADS)

Abrahams, Ian; Reiss, Michael J.; Sharpe, Rachael

2014-09-01

Background:Despite the widespread use of practical work in school it has been recognised that more needs to be done to improve its effectiveness in developing conceptual understanding. The 'Getting Practical' CPD (Continuing Professional Development) programme was designed to contribute towards an improvement in the effectiveness of practical work through initiating changes in teachers' predominantly 'hands-on' approach to practical work to one which manifests a more equitable balance between 'hands-on' and 'minds-on'. Purpose:To evaluate the impact of the Getting Practical: Improving Practical Work in Science CPD programme on teachers' ideas and practice in science practical work in primary and secondary schools in England. Programme description:The CPD programme was designed to improve the effectiveness of science practical work in developing conceptual understanding in primary and secondary schools in England. Sample:Ten teachers of primary science and 20 secondary science teachers. Design and methods:The study employed a condensed fieldwork strategy with data collected using interviews, observational field notes and pre- and post-CPD training observations in practical lessons within 30 schools. Results:Whilst the CPD programme was effective in getting teachers to reflect on the ideas associated with the Getting Practical programme, it was much less effective in bringing about changes in actual teaching practice.