Lateral support systems and underpinning, volume III : construction methods.

DOT National Transportation Integrated Search

1976-04-01

This report provides current information and design guidelines on cut-and-cover tunneling for practicing engineers. The main emphasis is on the geotechnical aspects of engineering. Included in this volume is a state-of-the-art summary of displacement...

Locomotive crashworthiness research : volume 2 : design concept generation and evaluation

DOT National Transportation Integrated Search

1995-07-01

This is the second volume in a series of four that reports on a study in which computer models were developed and applied to evaluate whether various crashworthiness features, as defined in Public Law 102-365, can provide practical benefit to the occ...

Investigation on the effectiveness of pretreatment in stormwater management technologies.

PubMed

Maniquiz-Redillas, Marla C; Geronimo, Franz Kevin F; Kim, Lee-Hyung

2014-09-01

The effectiveness of presettling basins as component of stormwater best management practice (BMP) technologies was investigated. Storm event monitoring and sediment collection were conducted from May 2009 to November 2012 on the presettling basins of the three BMP technologies designed to capture and treat stormwater runoff from highly impervious roads and parking lots. Data on captured runoff and sediment, total suspended solids (TSS) loadings, rainfall and runoff rate, sediment accumulation rate, as well as particle distribution and pollutant concentrations of sediment were gathered and analyzed along with the physical design characteristics of the presettling basins such as surface area and storage volume. Regression models were generated to determine significant relationships between design parameters. Results revealed that the storage volume ratio (ratio of storage volume of presettling basin to BMP) was an important parameter in designing the presettling basin of the BMP. For practicality, optimizing the design of the presettling basin means that the storage volume ratio should be determined based on the desired captured amount of runoff and sediment from runoff to limit the frequency of maintenance caused by the accumulation of sediment. It was recommended that pretreatment of runoff should be employed when the site in which the BMP is to be sited has high TSS loading and runoff rate, and is subjected to high intensity rainfall. Copyright © 2014. Published by Elsevier B.V.

Improved Design of Tunnel Supports : Volume 1 : Simplified Analysis for Ground-Structure Interaction in Tunneling

DOT National Transportation Integrated Search

1980-06-01

The purpose of this report is to provide the tunneling profession with improved practical tools in the technical or design area, which provide more accurate representations of the ground-structure interaction in tunneling. The design methods range fr...

Design and Control of Chemical Grouting : Volume 1 - Construction Control

DOT National Transportation Integrated Search

1983-04-01

This report presents the results of a laboratory and field research program investigating innovative method for design and control of chemical grouting in soils. Chemical grouting practice is reviewed and standard evaluation and measurement technique...

Composite pavement systems : synthesis of design and construction practices.

DOT National Transportation Integrated Search

2008-01-01

Composite pavement systems have shown the potential for becoming a cost-effective pavement alternative for highways with high and heavy traffic volumes, especially in Europe. This study investigated the design and performance of composite pavement st...

Aeroacoustics of Flight Vehicles: Theory and Practice. Volume 2: Noise Control

NASA Technical Reports Server (NTRS)

Hubbard, Harvey H. (Editor)

1991-01-01

Flight vehicles and the underlying concepts of noise generation, noise propagation, noise prediction, and noise control are studied. This volume includes those chapters that relate to flight vehicle noise control and operations: human response to aircraft noise; atmospheric propagation; theoretical models for duct acoustic propagation and radiation; design and performance of duct acoustic treatment; jet noise suppression; interior noise; flyover noise measurement and prediction; and quiet aircraft design and operational characteristics.

Architecting Science: Practical Tools for Architecting Flexible Systems

DTIC Science & Technology

2009-08-31

States of America and many other nations. Typically, designers would consider objectives such as cost, mass , volume, and capability, and the satellite...that minimized mass , volume and cost at the greatest capability would be the optimal design. However, the lifetime of the system can often be measured...described in terms of geometric and mass properties. Figure l shows the various components of the MAV airframe. A physical model of the air vehicle

Heat exchange equipment and valve design and operability improvement. NE-Volume 14

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, K.P; Niyogi, K.K.

1994-12-31

The papers contained in this volume were presented at the Maurice Holtz Memorial Sessions on Heat Exchanger Equipment and Valve Design and Operability Improvement, as part of the 1994 International Joint Power Generation Conference and Exhibition, October 2--6, in Phoenix, Arizona. These eight papers deal with two types of components--heat exchangers and valves, both of which are used in practically all sensors of the nuclear industry.

Patients of doctors further from medical school graduation have poorer outcomes.

PubMed

Norcini, John J; Boulet, John R; Opalek, Amy; Dauphinee, W Dale

2017-05-01

There is an apparent contradiction between the findings of studies indicating that patient outcomes are better when physicians have a greater volume of practice and those that find outcomes to be worse with increased time since training, which implies greater volume. This study was designed to estimate the adjusted relationships between physicians' characteristics, including recent practice volume and time since medical school graduation, and patient outcomes. This is a retrospective observational study based on all Pennsylvania hospitalisations over 7 years for acute myocardial infarction, congestive heart failure, gastrointestinal haemorrhage, hip fracture and pneumonia. It refers to 694 020 hospitalisations in 184 hospitals attended by 5280 internists and family physicians. Patient severity of illness at admission and in-hospital mortality, hospital location and volume, and the physician's recent practice volume, time since medical school graduation, board certification, and citizenship or medical school location were analysed. After adjustment, recent practice volume did not have a statistically significant association with in-hospital mortality for all of the conditions combined. By contrast, each decade since graduation from medical school was associated with a 4.5% increase in relative risk for patient mortality. Recent practice volume does not mitigate the increase in patient mortality associated with physicians' time since medical school graduation. These findings underscore the need to finds ways to support and encourage learning. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

40 CFR 450.21 - Effluent limitations reflecting the best practicable technology currently available (BPT).

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology currently available (BPT). (a) Erosion and sediment controls. Design, install and... minimum, such controls must be designed, installed and maintained to: (1) Control stormwater volume and... appropriate controls. (d) Pollution prevention measures. Design, install, implement, and maintain effective...

40 CFR 450.21 - Effluent limitations reflecting the best practicable technology currently available (BPT).

Code of Federal Regulations, 2011 CFR

2011-07-01

... control technology currently available (BPT). (a) Erosion and sediment controls. Design, install and... minimum, such controls must be designed, installed and maintained to: (1) Control stormwater volume and... appropriate controls. (d) Pollution prevention measures. Design, install, implement, and maintain effective...

Design and construction of PCC pavements, volume 2 : design features and practices that influence performance of pavements.

DOT National Transportation Integrated Search

1998-10-01

A study has been conducted to evaluate and analyze portland cement concrete (PCC) pavements in order to : develop recommendations for the design and construction of long-lived concrete pavements. It involved a : detailed evaluation and analysis of th...

Increased Grey Matter Associated with Long-Term Sahaja Yoga Meditation: A Voxel-Based Morphometry Study

PubMed Central

Hernández, Sergio Elías; Suero, José; Barros, Alfonso; González-Mora, José Luis; Rubia, Katya

2016-01-01

Objectives To investigate regional differences in grey matter volume associated with the practice of Sahaja Yoga Meditation. Design Twenty three experienced practitioners of Sahaja Yoga Meditation and twenty three non-meditators matched on age, gender and education level, were scanned using structural Magnetic Resonance Imaging and their grey matter volume were compared using Voxel-Based Morphometry. Results Grey matter volume was larger in meditators relative to non-meditators across the whole brain. In addition, grey matter volume was larger in several predominantly right hemispheric regions: in insula, ventromedial orbitofrontal cortex, inferior temporal and parietal cortices as well as in left ventrolateral prefrontal cortex and left insula. No areas with larger grey matter volume were found in non-meditators relative to meditators. Conclusions The study shows that long-term practice of Sahaja Yoga Meditation is associated with larger grey matter volume overall, and with regional enlargement in several right hemispheric cortical and subcortical brain regions that are associated with sustained attention, self-control, compassion and interoceptive perception. The increased grey matter volume in these attention and self-control mediating regions suggests use-dependent enlargement with regular practice of this meditation. PMID:26938433

[Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 9, Removal action system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30more » percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.« less

Fuel element concept for long life high power nuclear reactors

NASA Technical Reports Server (NTRS)

Mcdonald, G. E.; Rom, F. E.

1969-01-01

Nuclear reactor fuel elements have burnups that are an order of magnitude higher than can currently be achieved by conventional design practice. Elements have greater time integrated power producing capacity per unit volume. Element design concept capitalizes on known design principles and observed behavior of nuclear fuel.

Design and construction of PCC pavements. Volume 1, summary of design features and construction practices that influence performance of pavements

DOT National Transportation Integrated Search

1998-04-01

A study has been conducted to evaluate and analyze Portland cement concrete (PCC) pavements in order to develop recommendations for the design and construction of long-lived concrete pavements. In involved a detailed evaluation and analysis of the PC...

Design and construction of PCC pavements. Volume 2, design features and practices that influence performance of pavements

DOT National Transportation Integrated Search

1998-10-01

A study has been conducted to evaluate and analyze Portland cement concrete (PCC) pavements in order to develop recommendations for the design and construction of long-lived concrete pavements. In involved a detailed evaluation and analysis of the PC...

Design and Control of Chemical Grouting : Volume 4 - Executive Summary

DOT National Transportation Integrated Search

1983-04-01

This report focuses on the engineering practice of chemical grouting, summarizing the findings of a study to improve design and control techniques for chemical grouting in soils. Improved methods for the planning, control and evaluation of chemical g...

Computers in Life Science Education. Volume 5, 1988.

ERIC Educational Resources Information Center

Computers in Life Science Education, 1988

1988-01-01

Designed to serve as a means of communication among life science educators who anticipate or are currently using microcomputers as an educational tool, this volume of newsletters provides background information and practical suggestions on computer use. Over 80 articles are included. Topic areas include: (1) using a personal computer in a plant…

Developing Open-Ended Questions for Surface Area and Volume of Beam

ERIC Educational Resources Information Center

Kurniawan, Henry; Putri, Ratu Ilma Indra; Hartono, Yusuf

2018-01-01

The purpose of this research was to show open-ended questions about surface area and beam volume which valid and practice, have potential effect. This research is research development which consists of two main phases: preliminary phase (preparation phase and problem design) and formative evaluation phase (evaluation and revision phases). The…

Small Business Management Volume III: Curriculum. An Adult Education Program.

ERIC Educational Resources Information Center

Persons, Edgar A.; Swanson, Gordon I.

The small business management adult education program outlined in this curriculum guide is designed to help small business entrepreneurs solve their business management problems and attain the goals they have established for their businesses and their families. (An instructor's manual and practice problems are in separate volumes.) The 3-year…

Computers in Life Science Education. Volumes 1 through 4, 1984-1987.

ERIC Educational Resources Information Center

Modell, Harold, Ed.

1987-01-01

Designed to serve as a means of communication among life science educators who anticipate or are currently using microcomputers as an educational tool, these four volumes of newsletters provide background information and practical suggestions on computer use in over 80 articles. Topic areas include: (1) teaching physiology and other life sciences…

Retrofitting LID Practices into Existing Neighborhoods: Is It Worth It?

NASA Astrophysics Data System (ADS)

Wright, Timothy J.; Liu, Yaoze; Carroll, Natalie J.; Ahiablame, Laurent M.; Engel, Bernard A.

2016-04-01

Low-impact development (LID) practices are gaining popularity as an approach to manage stormwater close to the source. LID practices reduce infrastructure requirements and help maintain hydrologic processes similar to predevelopment conditions. Studies have shown LID practices to be effective in reducing runoff and improving water quality. However, little has been done to aid decision makers in selecting the most effective practices for their needs and budgets. The long-term hydrologic impact assessment LID model was applied to four neighborhoods in Lafayette, Indiana using readily available data sources to compare LID practices by analyzing runoff volumes, implementation cost, and the approximate period needed to achieve payback on the investment. Depending on the LID practice and adoption level, 10-70 % reductions in runoff volumes could be achieved. The cost per cubic meter of runoff reduction was highly variable depending on the LID practice and the land use to which it was applied, ranging from around 3 to almost 600. In some cases the savings from reduced runoff volumes paid back the LID practice cost with interest in less than 3 years, while in other cases it was not possible to generate a payback. Decision makers need this information to establish realistic goals and make informed decisions regarding LID practices before moving into detailed designs, thereby saving time and resources.

Assessment of design tools and criteria for urban rail track structures : volume 1. at-grade tie-ballast track.

DOT National Transportation Integrated Search

1974-04-30

The report presents the results of a critical review of the technical factors which govern the design and performance of at-grade tie-ballast track for urban rail systems. The assessment of current design practice is based on a review of the literatu...

Assessment of Design Tools and Criteria for Urban Rail Track Structures : Volume 2. At-Grade Slab Track.

DOT National Transportation Integrated Search

1974-04-01

This report presents the results of a critical review of the technical factors which govern the design and performance of at-grade slab track for urban rail systems. The assessment of current design practices is based on a review of the literature an...

Putting Writing Research into Practice: Applications for Teacher Professional Development

ERIC Educational Resources Information Center

Troia, Gary A., Ed.; Shankland, Rebecca K., Ed.; Heintz, Anne, Ed.

2010-01-01

What are the most effective methods for teaching writing across grade levels and student populations? What kind of training do teachers need to put research-validated methods into practice? This unique volume combines the latest writing research with clear-cut recommendations for designing high-quality professional development efforts. Prominent…

The Journal of Staff, Program, & Organization Development, Volume 12. Summer 1994-Spring 1995.

ERIC Educational Resources Information Center

Lewis, Karron G., Ed.

1995-01-01

This quarterly publication serves as a medium for the exchange of ideas regarding the planning, design, implementation, and evaluation of professional development practices at two- and four-year colleges. The four issues in volume 12 feature the following articles: (1) "The Course Syllabus Reexamined," by James O. Hammons and Jackson R. Shock; (2)…

ENGLISH FOR TODAY. BOOK ONE, AT HOME AND AT SCHOOL.

ERIC Educational Resources Information Center

SLAGER, WILLIAM R.; AND OTHERS

"AT HOME AND AT SCHOOL" IS THE FIRST OF A SIX-VOLUME ENGLISH AS A FOREIGN LANGUAGE SERIES DESIGNED PRIMARILY FOR INTERMEDIATE AND SECONDARY OR HIGH SCHOOL LEVEL STUDENTS OVERSEAS (E.G., FOR STUDENTS AGE 10 YEARS AND OLDER). THE MATERIAL AND PRESENTATION ARE STRUCTURALLY CONTROLLED AND GRADED, WITH EMPHASIS IN THIS VOLUME ON PATTERN PRACTICE. BASIC…

Middle School Curriculum, Instruction, and Assessment. The Handbook of Research in Middle Level Education.

ERIC Educational Resources Information Center

Anfara, Vincent A., Jr., Ed.; Stacki, Sandra L., Ed.

This volume theorizes, describes, and explains practices and some specific programs designed to help meet the needs and demands of a diverse student population. The central point of this volume is that curriculum, instruction, and assessment in middle-level education is a dynamic, interrelated system undergoing change. The book contains the…

Vision '90: The Maricopa Community Colleges Journal of Teaching and Learning, Volume 2, Numbers 1-2, 1990.

ERIC Educational Resources Information Center

Malena, Richard F., Ed.

1990-01-01

Designed to provide a forum for faculty and staff in the Maricopa Community College District to exchange information about effective teaching methods for practical application and intellectual stimulation, this journal publishes articles on teaching, learning, and classroom research activities. The two issues in this volume contain the following…

Sheet Metal Specialist 13-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Chanute AFB Technical Training Center, IL.

This course, adapted from military curriculum materials for use in vocational and technical education, provides training in the theory and practice of sheet metal work. Designed for student self-instruction (such as a correspondence course), the text consists of four volumes. Volume 1 discusses shop mathematics, measurement and layout tools,…

(Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30more » percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.« less

The Impact of Electronic Health Records on Workflow and Financial Measures in Primary Care Practices

PubMed Central

Fleming, Neil S; Becker, Edmund R; Culler, Steven D; Cheng, Dunlei; McCorkle, Russell; da Graca, Briget; Ballard, David J

2014-01-01

Objective To estimate a commercially available ambulatory electronic health record’s (EHR’s) impact on workflow and financial measures. Data Sources/Study Setting Administrative, payroll, and billing data were collected for 26 primary care practices in a fee-for-service network that rolled out an EHR on a staggered schedule from June 2006 through December 2008. Study Design An interrupted time series design was used. Staffing, visit intensity, productivity, volume, practice expense, payments received, and net income data were collected monthly for 2004–2009. Changes were evaluated 1–6, 7–12, and >12 months postimplementation. Data Collection/Extraction Methods Data were accessed through a SQLserver database, transformed into SAS®, and aggregated by practice. Practice-level data were divided by full-time physician equivalents for comparisons across practices by month. Principal Findings Staffing and practice expenses increased following EHR implementation (3 and 6 percent after 12 months). Productivity, volume, and net income decreased initially but recovered to/close to preimplementation levels after 12 months. Visit intensity did not change significantly, and a secular trend offset the decrease in payments received. Conclusions Expenses increased and productivity decreased following EHR implementation, but not as much or as persistently as might be expected. Longer term effects still need to be examined. PMID:24359533

Design-Based Implementation Research

ERIC Educational Resources Information Center

LeMahieu, Paul G.; Nordstrum, Lee E.; Potvin, Ashley Seidel

2017-01-01

Purpose: This paper is second of seven in this volume elaborating different approaches to quality improvement in education. It delineates a methodology called design-based implementation research (DBIR). The approach used in this paper is aimed at iteratively improving the quality of classroom teaching and learning practices in defined problem…

The Journal of Staff, Program, & Organization Development, Volume 14, Numbers 1-4, 1996-97. New Forums Faculty Development Series.

ERIC Educational Resources Information Center

Neal, Edward, Ed.

1997-01-01

This quarterly publication serves as a medium for the exchange of ideas regarding the planning, design, implementation, and evaluation of professional development practices at two- and four-year colleges. The four issues in volume 14 feature the following articles: (1) "A Home-Grown Faculty Development Program," (Jane T. Rauton); (2) "Creating…

Advances in Irrigation

NASA Astrophysics Data System (ADS)

Gardner, W. R.

This is the first volume of Advances in Irrigation, a new serial publication by the publishers of Advances in Agronomy and Advances in Hydroscience and designed to follow the same format. The editor is a well-known researcher and writer on irrigation and related subjects and has assembled a collection of highly regarded and respected authors for the initial volume. The readership for this volume will probably be mainly specialists and students interested in irrigation and an occasional design engineer.The seven contributions in this volume fall roughly into two classes: research and practice. Three papers (“Conjunctive Use of Rainfall and Irrigation in Semi-arid Regions,” by Stewart and Musik, “Irrigation Scheduling Using Soil Moisture Measurements: Theory and Practice,” by G. S. and M. D. Campbell, and “Use of Solute Transport Models to Estimate Salt Balance Below Irrigated Cropland,” by Jury) cover topics that have been the subject of a number of reviews. The contributions here provide brief, well-written, and authoritative summaries of the chosen topics and serve as good introductions or reviews. They should lend themselves well to classroom use in various ways. They also should be helpful to the nonspecialist interested in getting a sense of the subject without going into great detail.

Volume II: Ecosystem management: principles and applications.

Treesearch

M.E. Jensen; P.S. Bourgeron

1994-01-01

This document provides land managers with practical suggestions for implementing ecosystem management. It contains 28 papers organized into five sections: historical perspectives, ecological principles, sampling design, case studies, and implementation strategies.

Solar power satellite system definition study. Part 1 and part 2, volume 2: Technical summary

NASA Technical Reports Server (NTRS)

1977-01-01

Practical designs for power transmission were developed to meet requirements and constraints. Microwave link error was analyzed to confirm attainability of acceptable link efficiency. Silicon photovoltaic was determined to be the best overall choice for energy conversion, with a potassium Rankine cycle as the backup choice. Space transportation operations provide low cost because of traffic level, and the payload volume is the launch vehicle design driver. The power cost is 4 to 5 /kwh, which will be competitive with fossil fuel sources by the year 2000.

Projects That Matter: Concepts and Models for Service-Learning in Engineering. AAHE's Series on Service-Learning in the Disciplines.

ERIC Educational Resources Information Center

Tsang, Edmund, Ed.

This volume, the 14th in a series of monographs on service learning and academic disciplinary areas, is designed as a practical guide for faculty seeking to integrate service learning into an engineering course. The volume also deals with larger issues in engineering education and provides case studies of service-learning courses. The articles…

Conjecture Mapping to Optimize the Educational Design Research Process

ERIC Educational Resources Information Center

Wozniak, Helen

2015-01-01

While educational design research promotes closer links between practice and theory, reporting its outcomes from iterations across multiple contexts is often constrained by the volumes of data generated, and the context bound nature of the research outcomes. Reports tend to focus on a single iteration of implementation without further research to…

"Is This Ethical?" A Survey of Opinion on Principles and Practices of Document Design.

ERIC Educational Resources Information Center

Dragga, Sam

1996-01-01

Reprints a corrected version of an article originally published in the volume 43, number 1 issue of this journal. Presents results of a national survey of technical communicators and technical communication teachers assessing the ethics of seven document design cases involving manipulation of typography, illustrations, and photographs. Offers…

Mitigating mechanical failure of crystalline silicon electrodes for lithium batteries by morphological design [Morphological design of silicon electrode with anisotropic interface reaction rate for lithium ion batteries

DOE PAGES

An, Yonghao; Wood, Brandon C.; Ye, Jianchao; ...

2015-06-08

Although crystalline silicon (c-Si) anodes promise very high energy densities in Li-ion batteries, their practical use is complicated by amorphization, large volume expansion and severe plastic deformation upon lithium insertion. Recent experiments have revealed the existence of a sharp interface between crystalline Si (c-Si) and the amorphous Li xSi alloy during lithiation, which propagates with a velocity that is orientation dependent; the resulting anisotropic swelling generates substantial strain concentrations that initiate cracks even in nanostructured Si. Here we describe a novel strategy to mitigate lithiation-induced fracture by using pristine c-Si structures with engineered anisometric morphologies that are deliberately designed tomore » counteract the anisotropy in the crystalline/amorphous interface velocity. This produces a much more uniform volume expansion, significantly reducing strain concentration. Based on a new, validated methodology that improves previous models of anisotropic swelling of c-Si, we propose optimal morphological designs for c-Si pillars and particles. The advantages of the new morphologies are clearly demonstrated by mesoscale simulations and verified by experiments on engineered c-Si micropillars. The results of this study illustrate that morphological design is effective in improving the fracture resistance of micron-sized Si electrodes, which will facilitate their practical application in next-generation Li-ion batteries. In conclusion, the model and design approach present in this paper also have general implications for the study and mitigation of mechanical failure of electrode materials that undergo large anisotropic volume change upon ion insertion and extraction.« less

Comparison of Resource Requirements for a Wind Tunnel Test Designed with Conventional vs. Modern Design of Experiments Methods

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Micol, John R.

2011-01-01

The factors that determine data volume requirements in a typical wind tunnel test are identified. It is suggested that productivity in wind tunnel testing can be enhanced by managing the inference error risk associated with evaluating residuals in a response surface modeling experiment. The relationship between minimum data volume requirements and the factors upon which they depend is described and certain simplifications to this relationship are realized when specific model adequacy criteria are adopted. The question of response model residual evaluation is treated and certain practical aspects of response surface modeling are considered, including inference subspace truncation. A wind tunnel test plan developed by using the Modern Design of Experiments illustrates the advantages of an early estimate of data volume requirements. Comparisons are made with a representative One Factor At a Time (OFAT) wind tunnel test matrix developed to evaluate a surface to air missile.

Early Childhood Reform in Seven Communities: Front-Line Practice, Agency Management, and Public Policy. Volume III: Technical Appendix--Research Design and Methodology. Studies of Education Reform.

ERIC Educational Resources Information Center

Lopez, Elena

The administration and funding of early childhood education programs has engendered recent federal policy debates. This volume is the third report in a series of three, which are derived from a study that examined how local organizations implement complex government programs for early childhood education. The study analyzed and documented…

Specialization and the Current Practices of General Surgeons

PubMed Central

Decker, Marquita R; Dodgion, Christopher M; Kwok, Alvin C; Hu, Yue-Yung; Havlena, Jeff A; Jiang, Wei; Lipsitz, Stuart R; Kent, K Craig; Greenberg, Caprice C

2014-01-01

Background The impact of specialization on the practice of general surgery has not been characterized. Our goal was to assess general surgeons’ operative practices to inform surgical education and workforce planning. Study Design We examined the practices of general surgeons identified in the 2008 State Inpatient and Ambulatory Surgery Databases of the Healthcare Cost and Utilization Project (HCUP) for three US states. Operations were identified using ICD-9 and CPT codes linked to encrypted physician identifiers. For each surgeon, total operative volume and the percentage of practice comprised of their most common operation were calculated. Correlation was measured between general surgeons’ case volume and the number of other specialists in a health service area. Results There were 1,075 general surgeons who performed 240,510 operations in 2008. The mean operative volume for each surgeon was 224 annual procedures. General surgeons performed an average of 23 different types of operations. For the majority of general surgeons, their most common procedure comprised no more than 30% of total practice. The most common operations, ranked by the frequency that they appeared as general surgeons’ top procedure, included: cholecystectomy, colonoscopy, endoscopy, and skin excision. The proportion of general surgery practice comprised of endoscopic procedures inversely correlated with the number of gastroenterologists in the health service area (Rho = - 0.50, p = 0.005). Conclusions Despite trends toward specialization, the current practices of general surgeons remain heterogeneous. This indicates a continued demand for broad-based surgical education to allow future surgeons to tailor their practices to their environment. PMID:24210145

Making intelligent systems team players: Overview for designers

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1992-01-01

This report is a guide and companion to the NASA Technical Memorandum 104738, 'Making Intelligent Systems Team Players,' Volumes 1 and 2. The first two volumes of this Technical Memorandum provide comprehensive guidance to designers of intelligent systems for real-time fault management of space systems, with the objective of achieving more effective human interaction. This report provides an analysis of the material discussed in the Technical Memorandum. It clarifies what it means for an intelligent system to be a team player, and how such systems are designed. It identifies significant intelligent system design problems and their impacts on reliability and usability. Where common design practice is not effective in solving these problems, we make recommendations for these situations. In this report, we summarize the main points in the Technical Memorandum and identify where to look for further information.

Challenges in Accommodating Volume Change of Si Anodes for Li-Ion Batteries

PubMed Central

Ko, Minseong; Chae, Sujong; Cho, Jaephil

2015-01-01

Si has been considered as a promising alternative anode for next-generation Li-ion batteries (LIBs) because of its high theoretical energy density, relatively low working potential, and abundance in nature. However, Si anodes exhibit rapid capacity decay and an increase in the internal resistance, which are caused by the large volume changes upon Li insertion and extraction. This unfortunately limits their practical applications. Therefore, managing the total volume change remains a critical challenge for effectively alleviating the mechanical fractures and instability of solid-electrolyte-interphase products. In this regard, we review the recent progress in volume-change-accommodating Si electrodes and investigate their ingenious structures with significant improvements in the battery performance, including size-controlled materials, patterned thin films, porous structures, shape-preserving shell designs, and graphene composites. These representative approaches potentially overcome the large morphologic changes in the volume of Si anodes by securing the strain relaxation and structural integrity in the entire electrode. Finally, we propose perspectives and future challenges to realize the practical application of Si anodes in LIB systems. PMID:27525208

Exemplary Programs Serving Special Populations. Volume 1.

ERIC Educational Resources Information Center

Burac, Zipura T.

Designed for educational administrators, state-level personnel, program coordinators, teachers, and researchers, this monograph highlights five exemplary vocational programs serving individuals from special populations. Identified through an extensive national search in 1990, each program exemplifies successful practices for secondary and…

FRAMEWORK DESIGN FOR BMP PLACEMENT IN URBAN WATERSHEDS

EPA Science Inventory

A number of stormwater control strategies, commonly known as best management practices (BMPs), are used to mitigate runoff volumes and associated nonpoint source pollution due to wet-weather flows (WWFs). BMP types include ponds, bioretention facilities, infiltration trenches, g...

Study for the optimization of a transport aircraft wing for maximum fuel efficiency. Volume 1: Methodology, criteria, aeroelastic model definition and results

NASA Technical Reports Server (NTRS)

Radovcich, N. A.; Dreim, D.; Okeefe, D. A.; Linner, L.; Pathak, S. K.; Reaser, J. S.; Richardson, D.; Sweers, J.; Conner, F.

1985-01-01

Work performed in the design of a transport aircraft wing for maximum fuel efficiency is documented with emphasis on design criteria, design methodology, and three design configurations. The design database includes complete finite element model description, sizing data, geometry data, loads data, and inertial data. A design process which satisfies the economics and practical aspects of a real design is illustrated. The cooperative study relationship between the contractor and NASA during the course of the contract is also discussed.

Annual Proceedings of Selected Papers on The Practice of Education Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (37th, Jacksonville, Florida, 2014). Volume 2

ERIC Educational Resources Information Center

Simonson, Michael, Ed.

2014-01-01

For the thirty-seventh year, the Research and Theory Division and the Division of Instructional Design of the Association for Educational Communications and Technology (AECT) sponsored the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Jacksonville, Florida. This year's Proceedings…

Engine System Loads Development for the Fastrac 60K Flight Engine

NASA Technical Reports Server (NTRS)

Frady, Greg; Christensen, Eric R.; Mims, Katherine; Harris, Don; Parks, Russell; Brunty, Joseph

2000-01-01

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However, with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the new Fastrac engine program, the focus has been to reduce the cost to weight ratio; current structural dynamics analysis practices were tailored in order to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of Fastrac load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are discussed.

Welcoming Blue-Collar Scholars into the Ivory Tower: Developing Class-Conscious Strategies for Student Success. Series on Special Student Populations

ERIC Educational Resources Information Center

Soria, Krista M.

2015-01-01

"Welcoming Blue-Collar Scholars Into the Ivory Tower" is the first volume in a new book series designed to explore how institutional policies, practices, and cultures shape learning, development, and success for students who have been historically underserved or given limited consideration in the design of higher education contexts.…

Designs for Excellence in Education: The Legacy of B. F. Skinner. Limited Edition.

ERIC Educational Resources Information Center

West, Richard P., Ed.; Hamerlynck, L. A., Ed.

This volume is designed to provide a comprehensive picture of the range of verified educational practices which derive from psychologist B. F. Skinner's pursuit of the science of learning and behavior. The book begins with a challenge to the American system of education in the form of an article by Skinner, "The Shame of American…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Visco, Donald Patrick, Jr.; Faulon, Jean-Loup Michel; Roe, Diana C.

This report is a comprehensive review of the field of molecular enumeration from early isomer counting theories to evolutionary algorithms that design molecules in silico. The core of the review is a detail account on how molecules are counted, enumerated, and sampled. The practical applications of molecular enumeration are also reviewed for chemical information, structure elucidation, molecular design, and combinatorial library design purposes. This review is to appear as a chapter in Reviews in Computational Chemistry volume 21 edited by Kenny B. Lipkowitz.

United States Air Force F-35A Operational Basing Environmental Impact Statement. Volume 1

DTIC Science & Technology

2013-09-01

Evaluation (FDE) program and Weapons School (WS) beddown, the F-22 designator was used. Subsequent testing , development, and deployment resulted in...Initial F-35A Operational Basing EIS Final, September 2013 contract to develop the JSF ( designated the F-35 Lightning II). Since then, testing of F...of the aircraft even with system failures. Throughout the design and testing process, safety initiatives took previous best practices for single

Design and Testing of an Active Core for Sandwich Panels

DTIC Science & Technology

2008-03-01

some degrees of unimorph from the design. In the experiment, the current prototype, which is made of polycarbonate material and Nitinol spring...such as Nitinol , is chosen due to its greater shape memory strain (8.5%), practical fabrication technique, and is relatively in- expansive. 2.2... Nitinol and its volume fractions are 5%, 7.5%, and 10% of the total design domain. The artificial stiffness implemented at the top and bottom right hand

42 CFR 495.306 - Establishing patient volume.

Code of Federal Regulations, 2010 CFR

2010-10-01

... calculate patient volume at the group practice/clinic level, but only in accordance with all of the following limitations: (1) The clinic or group practice's patient volume is appropriate as a patient volume... practice's patient volume determination. (3) All EPs in the group practice or clinic must use the same...

Supporting Parents: How Six Decades of Parenting Research Can Inform Policy and Best Practice. Social Policy Report. Volume 30, Number 5

ERIC Educational Resources Information Center

Teti, Douglas M.; Cole, Pamela M.; Cabrera, Natasha; Goodman, Sherryl H.; McLoyd, Vonnie C.

2017-01-01

In this paper, we call attention to the need to expand existing efforts and to develop policies, programs, and best practices in the United States designed to support parents at risk and promote parenting competence. Despite the existence of some services offered to parents of children at risk due to developmental delay or at economic risk, the…

Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies

NASA Technical Reports Server (NTRS)

Burge, G. W.; Blackmon, J. B.

1973-01-01

An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.

Considerations for practice-based research: a cross-sectional survey of chiropractic, acupuncture and massage practices.

PubMed

Floden, Lysbeth; Howerter, Amy; Matthews, Eva; Nichter, Mark; Cunningham, James K; Ritenbaugh, Cheryl; Gordon, Judith S; Muramoto, Myra L

2015-05-02

Complementary and alternative medicine (CAM) use has steadily increased globally over the past two decades and is increasingly playing a role in the healthcare system in the United States. CAM practice-based effectiveness research requires an understanding of the settings in which CAM practitioners provide services. This paper describes and quantifies practice environment characteristics for a cross-sectional sample of doctors of chiropractic (DCs), licensed acupuncturists (LAcs), and licensed massage therapists (LMTs) in the United States. Using a cross-sectional telephone survey of DCs (n = 32), LAcs (n = 70), and LMTs (n = 184) in the Tucson, AZ metropolitan area, we collected data about each location where practitioners work, as well as measures on practitioner and practice characteristics including: patient volume, number of locations where practitioners worked, CAM practitioner types working at each location, and business models of practice. The majority of practitioners reported having one practice location (93.8% of DCs, 80% of LAcs and 59.8% of LMTs) where they treat patients. Patient volume/week was related to practitioner type; DCs saw 83.13 (SD = 49.29) patients/week, LAcs saw 22.29 (SD = 16.88) patients/week, and LMTs saw 14.21 (SD =10.25) patients per week. Practitioners completed surveys for N = 388 practice locations. Many CAM practices were found to be multidisciplinary and/or have more than one practitioner: 9/35 (25.7%) chiropractic practices, 24/87 (27.6%) acupuncture practices, and 141/266 (53.0%) massage practices. Practice business models across CAM practitioner types were heterogeneous, e.g. sole proprietor, employee, partner, and independent contractor. CAM practices vary across and within disciplines in ways that can significantly impact design and implementation of practice-based research. CAM research and intervention programs need to be mindful of the heterogeneity of CAM practices in order to create appropriate interventions, study designs, and implementation plans.

You Sank My... Bacteriophage?

ERIC Educational Resources Information Center

Bokor, Julie

2012-01-01

Practicing correct pipetting procedure doesn't have to be boring. "Pipetting by Coordinates" is an effective way to teach necessary pipetting skills in an enjoyable manner. Students create designs as they add volumes of colored water to specific wells and gain experience using a basic biotechnology tool.

Healing Magazine, 2002.

ERIC Educational Resources Information Center

DiBiase, Miriam H., Ed.

2002-01-01

This newly designed volume of "Healing Magazine" features practical, clinical information aimed at sharing current work in children's mental health. The first issue shares information on guiding children through times of trauma, particularly after the events of September 11th. Two articles provide information on debriefing after trauma…

Magnetic Field Monitoring in the SNS and LANL Neutron EDM Experiments

NASA Astrophysics Data System (ADS)

Aleksandrova, Alina; SNS nEDM Collaboration; LANL nEDM Collaboration

2017-09-01

The SNS neutron EDM experiment requires the ability to precisely control and monitor the magnetic field inside of the fiducial volume. However, it is not always practical (or even possible) to measure the field within the region of interest directly. To remedy this issue, we have designed a field monitoring system that will allow us to reconstruct the field inside of the fiducial volume using noninvasive measurements of the field components at discrete locations external to this volume. A prototype probe array (consisting of 12 single-axis fluxgate magnetometer sensors) was used to monitor the magnetic field within the fiducial volume of an in-house magnetic testing apparatus. In this talk, the design and results of this test will be presented, and the possible implementation of this field monitoring method may have in the room temperature LANL neutron EDM experiment will be discussed. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under Award Number DE-SC-0014622.

The impact of electronic health records on workflow and financial measures in primary care practices.

PubMed

Fleming, Neil S; Becker, Edmund R; Culler, Steven D; Cheng, Dunlei; McCorkle, Russell; da Graca, Briget; Ballard, David J

2014-02-01

To estimate a commercially available ambulatory electronic health record's (EHR's) impact on workflow and financial measures. Administrative, payroll, and billing data were collected for 26 primary care practices in a fee-for-service network that rolled out an EHR on a staggered schedule from June 2006 through December 2008. An interrupted time series design was used. Staffing, visit intensity, productivity, volume, practice expense, payments received, and net income data were collected monthly for 2004-2009. Changes were evaluated 1-6, 7-12, and >12 months postimplementation. Data were accessed through a SQLserver database, transformed into SAS®, and aggregated by practice. Practice-level data were divided by full-time physician equivalents for comparisons across practices by month. Staffing and practice expenses increased following EHR implementation (3 and 6 percent after 12 months). Productivity, volume, and net income decreased initially but recovered to/close to preimplementation levels after 12 months. Visit intensity did not change significantly, and a secular trend offset the decrease in payments received. Expenses increased and productivity decreased following EHR implementation, but not as much or as persistently as might be expected. Longer term effects still need to be examined. © Health Research and Educational Trust.

Recovery of Navy distillate fuel from reclaimed product. Volume II. Literature review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brinkman, D.W.; Whisman, M.L.

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). This first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in whichmore » experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 references and abstracts. This appendix, because of its volume, has been published separately as Volume 2.« less

Understanding Digital Note-Taking Practice for Visualization.

PubMed

Willett, Wesley; Goffin, Pascal; Isenberg, Petra

2015-05-13

We present results and design implications from a study of digital note-taking practice to examine how visualization can support revisitation, reflection, and collaboration around notes. As digital notebooks become common forms of external memory, keeping track of volumes of content is increasingly difficult. Information visualization tools can help give note-takers an overview of their content and allow them to explore diverse sets of notes, find and organize related content, and compare their notes with their collaborators. To ground the design of such tools, we conducted a detailed mixed-methods study of digital note-taking practice. We identify a variety of different editing, organization, and sharing methods used by digital note-takers, many of which result in notes becoming "lost in the pile''. These findings form the basis for our design considerations that examine how visualization can support the revisitation, organization, and sharing of digital notes.

Association of Very Low-Volume Practice With Vascular Surgery Outcomes in New York.

PubMed

Mao, Jialin; Goodney, Philip; Cronenwett, Jack; Sedrakyan, Art

2017-08-01

Little research has focused on very low-volume surgery, especially in the context of decreasing vascular surgery volume with the adoption of endovascular procedures. To investigate the existence and outcomes of open abdominal aortic aneurysm repair (OAR) and carotid endarterectomy (CEA) performed by very low-volume surgeons in New York. This cohort study examined inpatient data of patients undergoing elective OAR or CEA from 2000 to 2014 from all New York hospitals. Surgeons who performed 1 or less designated procedure per year on average were considered very low volume, as opposed to higher-volume surgeons. Temporal trends of the existence of very low-volume practice were evaluated. Hierarchical logistic regression was used to compare in-hospital outcomes and health care resource use between patients treated by very low-volume surgeons and higher-volume surgeons for both OAR and CEA, adjusting for patient, surgeon, and hospital characteristics. There were 8781 OAR procedures and 68 896 CEA procedures included in the study. The mean (SD) patient age was 71.7 (8.4) years for OAR and 71.5 (9.1) years for CEA. A total of 614 surgeons performed OAR and 1071 performed CEA in New York during the study period. Of these, 318 (51.8%) and 512 (47.8%), respectively, were very low-volume surgeons. Very low-volume surgeons were less likely to be vascular surgeons. The number and proportion of very low-volume surgeons decreased over years. Compared with patients treated by higher-volume surgeons, those treated by very low-volume surgeons were more likely to have higher in-hospital mortality (odds ratio [OR], 2.09; 95% CI, 1.41-3.08) following OAR and higher risks of postoperative myocardial infarction (OR, 1.83; 95% CI, 1.03-3.26) and stroke (OR, 1.78; 95% CI, 1.21-2.62) following CEA. Patients treated by very low-volume surgeons also had greater health care resource use following both surgeries, including prolonged length of stay (OR, 1.37; 95% CI, 1.11-1.70) following OAR as well as higher charges (OR, 1.28; 95% CI, 1.01-1.62) and increased 30-day readmission (OR, 1.30; 95% CI 1.04-1.62) following CEA. The OAR and CEA procedures performed by very low-volume surgeons resulted in worse postoperative outcomes and greater lengths of stay. Although the percentage of very low-volume surgeons declined from 2000 to 2014, it remains concerning, given ready access to higher-volume surgeons. Future research is needed to understand the existence of this practice pattern in other surgical fields. Efforts to eliminate this practice pattern are warranted to ensure high-quality care for all patients.

Human Factors Design Principles for Instrument Approach Procedure Charts. Volume 1. Readability

DTIC Science & Technology

1992-08-01

discovery of mechanical type (Spencer, 1969). Not surprisingly, there is a substantial body of research and accepted practice that addresses...Swey for Automotive Engieer ARP4032 (April, 1988). Human engineering considerations in the application of cobr to electronic aircmjl dLspkp. Warrenlale

U.S. Transit Track Restraining Rail. Volume I : Study of Requirements and Practices

DOT National Transportation Integrated Search

1981-12-01

This report covers a study of restraining rails in transit track, which is part of the current research program of UMTA and was initiated: (1) to assist in the analysis, design, and maintenance and operation of transit track; (2) to compile guideline...

Resources for Guidance Program Improvement. Volume 2.

ERIC Educational Resources Information Center

Frenza, Mary C., Comp.; and Others

This guide, for guidance personnel and teachers, is designed to provide ready access to current, practical programs, activities, and references for improving guidance programs. The resources are organized in four sections representing areas of basic concern for guidance personnel. Section 1 presents selected portions of guidance programs from…

Multicultural Issues in Child Care.

ERIC Educational Resources Information Center

Gonzalez-Mena, Janet

This volume focuses on cultural differences relevant to all child-care-giving settings, including day care, nursery, and preschool programs. Based on respect for cultural pluralism, this concise supplementary text is designed to increase caregiver sensitivity to different cultural child-care practices and values and to improve communication and…

Examining the Use of First Principles of Instruction by Instructional Designers in a Short-Term, High Volume, Rapid Production of Online K-12 Teacher Professional Development Modules

ERIC Educational Resources Information Center

Mendenhall, Anne M.

2012-01-01

Merrill (2002a) created a set of fundamental principles of instruction that can lead to effective, efficient, and engaging (e[superscript 3]) instruction. The First Principles of Instruction (Merrill, 2002a) are a prescriptive set of interrelated instructional design practices that consist of activating prior knowledge, using specific portrayals…

2005 Tri-Service Infrastructure Systems Conference and Exhibition. Volume 12. Tracks 15, 16 and 17

DTIC Science & Technology

2005-08-04

glare, surface luminances, and uniformity. Also, the importance of daylight on human health and productivity is emphasized. • Exterior lighting design...Electrical Safety Requirements – OSHA CFR Title 29 Part 1910 Occupational Safety and Health Standard, Subpart S – Electrical – Design Safety...Standards and Safety Related Work Practices Part 1926 Safety and Health Regulations for Construction, Subpart K – Electrical – Installation Safety

Standardization and program effect analysis (Study 2.4). Volume 3: Design-to-cost analysis

NASA Technical Reports Server (NTRS)

Shiokari, T.

1975-01-01

The program procedures that were incorporated into an on-going "design-to-cost" spacecraft program are examined. Program procedures are the activities that support the development and operations of the flight unit: contract management, documents, integration meetings, engineering, and testing. This report is limited to the program procedures that were implemented, with emphasis on areas that may depart from normal satellite development practices.

The field becomes the laboratory? The impact of the contextual digital footprint on the discipline of E/HF.

PubMed

Sharples, Sarah; Houghton, Robert J

2017-02-01

The increasing prevalence of affordable digital sensors, ubiquitous networking and computation puts us at what is only the start of a new era in terms of the volume, coverage and granularity of data that we can access about individuals and workplaces. This paper examines the consequences of harnessing this data deluge for the practice of E/HF. Focusing on what we term the 'contextual digital footprint', the trail of data we produce through interactions with many different digital systems over the course of even a single day, we describe three example scenarios (drawn from health care, distributed work and transportation) and examine how access to data directly drawn in considerable volume from the field will potentially change our application of design and evaluation methods. We conclude with a discussion of issues relevant to ethical and professional practice within this new environment including the increased challenges of respecting anonymity, working with n = all data-sets and the central role of ergonomists in promulgating positive uses of data while retaining a systems-based humanistic approach to work design. Practitioner summary: The paper envisions the impact of new and emerging sources of data about people and workplaces upon future practice in E/HF. We identify practical consequences for ergonomics practice, highlight new areas of professional competence likely to be required and flag both the risks and benefits of adopting a more data-driven approach.

Internationalizing the U.S. Classroom: Japan as a Model.

ERIC Educational Resources Information Center

Wojtan, Linda S., Ed.; Spence, Donald, Ed.

This collection of essays presents a rationale for incorporating teaching about Japan in the K-12 curriculum. The volume provides practical examples and guidelines about how to achieve this goal. The essays are organized into three main categories--professional development, curriculum design and enhancement, and exchange. The essays include:…

Design and Evaluation of Scour for Bridges Using HEC-18 (Volume 3 of 3).

DOT National Transportation Integrated Search

2017-07-04

The overall objective of this research is the development of a new approach for evaluating bridge scour for New Jersey's bridges on non-tidal waterways. The study commenced with a web-based survey of scour practice within the U.S. and a literature re...

Design and Evaluation of Scour for Bridges Using HEC-18 (Volume 1 of 3).

DOT National Transportation Integrated Search

2017-07-04

The overall objective of this research is the development of a new approach for evaluating bridge scour for New Jersey's bridges on non-tidal waterways. The study commenced with a web-based survey of scour practice within the U.S. and a literature re...

A Meta-Analysis to Evaluate Property Value Co-Benefits of Using Environmental Site Design for Stormwater Runoff Reduction

EPA Science Inventory

Practices to reduce stormwater runoff are implemented for several primary purposes: to protect and improve water quality and hydromorphology in water bodies that receive stormwater runoff, to prevent soil erosion, to maintain groundwater recharge volume, and to prevent increasing...

Senda: Lectura 4 (Senda: Reader 4).

ERIC Educational Resources Information Center

Peniche Leger, Maria Elena, Ed.

This textbook, the fourth in a series of six, is designed to give the intermediate elementary school student continued practice in reading Spanish. It contains some 30 sections with passages of increasing degrees of difficulty. Colored illustrations are included. In this volume, Quetzalcoatl, god of the winds, conducts a group of children to…

The Journal of Staff, Program, & Organization Development, Volume 1, Numbers 1-4, 1983.

ERIC Educational Resources Information Center

Watts, Gordon E., Ed.

1983-01-01

Designed as a forum for the exchange of practical and theoretical information regarding all aspects of personal, professional, and institutional development in postsecondary education, this journal contains articles, announcements, and resource reviews. The first issue of 1983 includes the following articles: "Institutionalizing Staff, Program and…

International Review of Education. Volume 25.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Hamburg (West Germany). Inst. for Education.

This publication, designed for a worldwide readership, contains articles, notes, and book reviews pertaining to educational theories and practices. While the body of the articles are in English, overviews are given in German and French. French and German books are reviewed in their native language; English and other language books are reviewed in…

Scale Up in Education: Volume 2: Issues in Practice

ERIC Educational Resources Information Center

Schneider, Barbara, Ed.; McDonald, Sarah-Kathryn, Ed.

2006-01-01

This book explores the challenges of implementing and assessing educational interventions in varied classroom contexts. Included are reflections on the challenges of designing studies for improving the instructional core of schools, guidelines for establishing evidence of interventions' impacts across a wide range of settings, and an assessment of…

Design and Evaluation of Scour for Bridges Using HEC-18 (Volume 2 of 3).

DOT National Transportation Integrated Search

2017-07-04

The overall objective of this research is the development of a new approach for evaluating bridge scour for New Jersey's bridges on non-tidal waterways. The study commenced with a web-based survey of scour practice within the U.S. and a literature re...

Interactive Videodisc: the "Why" and the "How." CALICO Monograph Volume 2, Spring 1991.

ERIC Educational Resources Information Center

Bush, Michael D.; And Others

This monograph presents articles on interactive videodisc technology in language learning, ranging from the importance of a theoretical framework, the transition from theory to practice, getting started, design considerations, hypermedia, discovery environments, authoring software, workstation environments, and a look at the future of optical disc…

Allied Health Occupations II (Health Careers--Core Curriculum).

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a second-year course in allied health occupations education that is designed to provide students with background informational material and practical skills used in various health fields. Addressed in the individual units of the course are the following topics: safety; ethical and legal…

International training course on nuclear materials accountability for safeguards purposes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-12-01

The two volumes of this report incorporate all lectures and presentations at the International Training Course on Nuclear Materials Accountability and Control for Safeguards Purposes, held May 27-June 6, 1980, at the Bishop's Lodge near Santa Fe, New Mexico. The course, authorized by the US Nuclear Non-Proliferation Act and sponsored by the US Department of Energy in cooperation with the International Atomic Energy Agency, was developed to provide practical training in the design, implementation, and operation of a National system of nuclear materials accountability and control that satisfies both National and IAEA International safeguards objectives. Volume I, covering the firstmore » week of the course, presents the background, requirements, and general features of material accounting and control in modern safeguard systems. Volume II, covering the second week of the course, provides more detailed information on measurement methods and instruments, practical experience at power reactor and research reactor facilities, and examples of operating state systems of accountability and control.« less

Acoustic cymbal performance under hydrostatic pressure

NASA Astrophysics Data System (ADS)

Jenne, Kirk E.; Huang, Dehua; Howarth, Thomas R.

2004-05-01

Continual awareness about the need to develop light-weight, low-volume, broadband, underwater acoustic projector and receive arrays that perform consistently in diverse environments is evident in recent Navy acoustic system initiatives. Acoustic cymbals, so named for resemblance to the percussive musical instruments, are miniature flextensional transducers that may perhaps meet the performance criteria for consistent performance under hydrostatic pressure after modifications in the design. These acoustic cymbals consist of a piezoceramic disk (or ring) bonded to two opposing cymbal-shaped metal shells. Operating as mechanical transformers, the two metal shells convert the large generative force inherently within the disk's radial mode into increased volume displacement at the metal shell surface to obtain volume displacement that translates into usable source levels and/or sensitivities at sonar frequencies in a relatively broad band. The air-backed design for standard acoustic cymbal transducers presents a barrier to deepwater applications. A new acoustic cymbal design for high-pressure applications will be presented for the first time. This practical pressure compensation is designed to diminish the effects of hydrostatic pressure to maintain consistent acoustic cymbal performance. Transmit and receive performance data, determined at the Naval Undersea Warfare Center's (NUWC) Acoustic Pressure Tank Facility (APTF), is presented.

Stormwater management criteria for on-site pollution control: a comparative assessment of international practices.

PubMed

Sage, Jérémie; Berthier, Emmanuel; Gromaire, Marie-Christine

2015-07-01

Over the last decade, a growing interest has been shown toward innovative stormwater management practices, breaking away from conventional "end of pipe" approaches (based on conveying water offsite to centralized detention facilities). Innovative strategies, referred to as sustainable urban drainage systems, low impact development (LID) or green infrastructures, advocating for management of runoff as close to its origin as possible, have therefore gained a lot of popularity among practitioners and public authorities. However, while the need for pollution control is generally well accepted, there is no wide agreement about management criteria to be given to developers. This article hence aims to compare these criteria through literature analysis of different state or local stormwater management manuals or guidelines, investigating both their suitability for pollution control and their influence on best management practices selection and design. Four categories of criteria were identified: flow-rate limitations, "water quality volumes" (to be treated), volume reduction (through infiltration or evapotranspiration), and non-hydrologic criteria (such as loads reduction targets or maximum effluent concentrations). This study suggests that hydrologic criteria based on volume reduction (rather than treatment) might generally be preferable for on-site control of diffuse stormwater pollution. Nonetheless, determination of an appropriate management approach for a specific site is generally not straightforward and presents a variety of challenges for site designers seeking to satisfy local requirements in addressing stormwater quantity and quality issues. The adoption of efficient LID solution may therefore strongly depend on the guidance given to practitioners to account for these management criteria.

Stormwater Management Criteria for On-Site Pollution Control: A Comparative Assessment of International Practices

NASA Astrophysics Data System (ADS)

Sage, Jérémie; Berthier, Emmanuel; Gromaire, Marie-Christine

2015-07-01

Over the last decade, a growing interest has been shown toward innovative stormwater management practices, breaking away from conventional "end of pipe" approaches (based on conveying water offsite to centralized detention facilities). Innovative strategies, referred to as sustainable urban drainage systems, low impact development (LID) or green infrastructures, advocating for management of runoff as close to its origin as possible, have therefore gained a lot of popularity among practitioners and public authorities. However, while the need for pollution control is generally well accepted, there is no wide agreement about management criteria to be given to developers. This article hence aims to compare these criteria through literature analysis of different state or local stormwater management manuals or guidelines, investigating both their suitability for pollution control and their influence on best management practices selection and design. Four categories of criteria were identified: flow-rate limitations, "water quality volumes" (to be treated), volume reduction (through infiltration or evapotranspiration), and non-hydrologic criteria (such as loads reduction targets or maximum effluent concentrations). This study suggests that hydrologic criteria based on volume reduction (rather than treatment) might generally be preferable for on-site control of diffuse stormwater pollution. Nonetheless, determination of an appropriate management approach for a specific site is generally not straightforward and presents a variety of challenges for site designers seeking to satisfy local requirements in addressing stormwater quantity and quality issues. The adoption of efficient LID solution may therefore strongly depend on the guidance given to practitioners to account for these management criteria.

Recovery of Navy distillate fuel from reclaimed product. Volume I. Technical discussion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brinkman, D.W.; Whisman, M.L.

1984-11-01

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). The first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in whichmore » experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 referenvces and abstracts. This appendix, because of its volume, has been published separately as Volume 2. 18 figures, 4 tables.« less

Plug-in nanoliter pneumatic liquid dispenser with nozzle design flexibility

PubMed Central

Choi, In Ho; Kim, Hojin; Lee, Sanghyun; Baek, Seungbum; Kim, Joonwon

2015-01-01

This paper presents a novel plug-in nanoliter liquid dispensing system with a plug-and-play interface for simple and reversible, yet robust integration of the dispenser. A plug-in type dispenser was developed to facilitate assembly and disassembly with an actuating part through efficient modularization. The entire process for assembly and operation of the plug-in dispenser is performed via the plug-and-play interface in less than a minute without loss of dispensing quality. The minimum volume of droplets pneumatically dispensed using the plug-in dispenser was 124 nl with a coefficient of variation of 1.6%. The dispensed volume increased linearly with the nozzle size. Utilizing this linear relationship, two types of multinozzle dispensers consisting of six parallel channels (emerging from an inlet) and six nozzles were developed to demonstrate a novel strategy for volume gradient dispensing at a single operating condition. The droplet volume dispensed from each nozzle also increased linearly with nozzle size, demonstrating that nozzle size is a dominant factor on dispensed volume, even for multinozzle dispensing. Therefore, the proposed plug-in dispenser enables flexible design of nozzles and reversible integration to dispense droplets with different volumes, depending on the application. Furthermore, to demonstrate the practicality of the proposed dispensing system, we developed a pencil-type dispensing system as an alternative to a conventional pipette for rapid and reliable dispensing of minute volume droplets. PMID:26594263

Plug-in nanoliter pneumatic liquid dispenser with nozzle design flexibility.

PubMed

Choi, In Ho; Kim, Hojin; Lee, Sanghyun; Baek, Seungbum; Kim, Joonwon

2015-11-01

This paper presents a novel plug-in nanoliter liquid dispensing system with a plug-and-play interface for simple and reversible, yet robust integration of the dispenser. A plug-in type dispenser was developed to facilitate assembly and disassembly with an actuating part through efficient modularization. The entire process for assembly and operation of the plug-in dispenser is performed via the plug-and-play interface in less than a minute without loss of dispensing quality. The minimum volume of droplets pneumatically dispensed using the plug-in dispenser was 124 nl with a coefficient of variation of 1.6%. The dispensed volume increased linearly with the nozzle size. Utilizing this linear relationship, two types of multinozzle dispensers consisting of six parallel channels (emerging from an inlet) and six nozzles were developed to demonstrate a novel strategy for volume gradient dispensing at a single operating condition. The droplet volume dispensed from each nozzle also increased linearly with nozzle size, demonstrating that nozzle size is a dominant factor on dispensed volume, even for multinozzle dispensing. Therefore, the proposed plug-in dispenser enables flexible design of nozzles and reversible integration to dispense droplets with different volumes, depending on the application. Furthermore, to demonstrate the practicality of the proposed dispensing system, we developed a pencil-type dispensing system as an alternative to a conventional pipette for rapid and reliable dispensing of minute volume droplets.

Volume, conservation and instruction: A classroom based solomon four group study of conflict

NASA Astrophysics Data System (ADS)

Rowell, J. A.; Dawson, C. J.

The research reported is an attempt to widen the applicability of Piagetian theory-based conflict methodology from individual situations to whole classes. A Solomon four group experimental design augmented by a delayed posttest, was used to provide a controlled framework for studying the effects of conflict instruction on Grade 8 students' ability to conserve volume of noncompressible matter, and to apply that knowledge to gas volume. The results, reported for individuals and groups, show the methodology can be effective, particularly when instruction is preceded by a pretest. Immediate posttest differences in knowledge of gas volume between spontaneous (pretest) conservers and instructed conservers of volume of noncompressible matter were no longer in evidence on the delayed posttest. This observation together with the effects of pretesting and of the instructional sequence are shown to have a consistent Piagetian interpretation. Practical implications are discussed.

Writing at Century's End: Essays on Computer-Assisted Composition.

ERIC Educational Resources Information Center

Gerrard, Lisa, Ed.

Most of the essays in this collection originated as presentations at the University of California, Los Angeles, Conference on Computers and Writing, held in May 1985. Issues addressed in the volume range from concrete, practical considerations (such as designing classroom exercises) to political and theoretical ones (such as the instructor's…

Area Handbook for Senegal. Second Edition.

ERIC Educational Resources Information Center

Nelson, Harold D.; And Others

This volume on Senegal is one of a series of handbooks prepared by Foreign Area Studies (FAS) of the American University. It is designed to be useful to military and other personnel who need a convenient compilation of basic facts about the social, economic, political, and military institutions and practices of Senegal. The emphasis is on…

Kinship Care: Improving Practice through Research.

ERIC Educational Resources Information Center

Gleeson, James P., Ed.; Hairston, Creasie Finney, Ed.

Family members have traditionally provided kinship care for each other in times of crisis. Recently, such care has become part of the child welfare system. This edited volume presents several studies designed to identify current knowledge about kinship care as a child welfare service. Presented in five parts, the book summarizes the current state…

Creating a Global Agenda: Assessments, Solutions, and Action Plans.

ERIC Educational Resources Information Center

Didsbury, Howard F., Jr., Ed.

Designed for educational policymakers and researchers, this volume on global issues is divided into four sections. The four essays in the first section, "Reducing the Nuclear Peril," offer a brief documentary survey and then present practical suggestions and action plans to reduce the nuclear threat. The eight papers in the second…

Forced underwater laminar flows with active magnetohydrodynamic metamaterials

NASA Astrophysics Data System (ADS)

Culver, Dean; Urzhumov, Yaroslav

2017-12-01

Theory and practical implementations for wake-free propulsion systems are proposed and proven with computational fluid dynamic modeling. Introduced earlier, the concept of active hydrodynamic metamaterials is advanced by introducing magnetohydrodynamic metamaterials, structures with custom-designed volumetric distribution of Lorentz forces acting on a conducting fluid. Distributions of volume forces leading to wake-free, laminar flows are designed using multivariate optimization. Theoretical indications are presented that such flows can be sustained at arbitrarily high Reynolds numbers. Moreover, it is shown that in the limit Re ≫102 , a fixed volume force distribution may lead to a forced laminar flow across a wide range of Re numbers, without the need to reconfigure the force-generating metamaterial. Power requirements for such a device are studied as a function of the fluid conductivity. Implications to the design of distributed propulsion systems underwater and in space are discussed.

Studies in Course Design. Volume 1. Case Study I: One Year Postgraduate Course in Teaching for Biology Graduates. Case Study II: A Course for Teachers in General Medical Practice.

ERIC Educational Resources Information Center

Dallas, Dorothy; And Others

A collection of working papers from the course design process of two education courses is presented with attention focused on the category systems employed to set out course objectives and methods. The two studies illustrate the use of a grid to establish the relationships between various course objectives. The first collection of papers is based…

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume 5. Background Literature

DTIC Science & Technology

1981-02-01

the machine . ARI’s efforts in this area focus on human perfor- mance problems related to interactions with command and control centers, and on issues...improvement of the user- machine interface. Lacking consistent design principles, current practice results in a fragmented and unsystematic approach to system...complexity in the user- machine interface of BAS, ARI supported this effort for develop- me:nt of an online language for Army tactical intelligence

Practical optimal flight control system design for helicopter aircraft. Volume 2: Software user's guide

NASA Technical Reports Server (NTRS)

Riedel, S. A.

1979-01-01

A method by which modern and classical control theory techniques may be integrated in a synergistic fashion and used in the design of practical flight control systems is presented. A general procedure is developed, and several illustrative examples are included. Emphasis is placed not only on the synthesis of the design, but on the assessment of the results as well. The first step is to establish the differences, distinguishing characteristics and connections between the modern and classical control theory approaches. Ultimately, this uncovers a relationship between bandwidth goals familiar in classical control and cost function weights in the equivalent optimal system. In order to obtain a practical optimal solution, it is also necessary to formulate the problem very carefully, and each choice of state, measurement and output variable must be judiciously considered. Once design goals are established and problem formulation completed, the control system is synthesized in a straightforward manner. Three steps are involved: filter-observer solution, regulator solution, and the combination of those two into the controller. Assessment of the controller permits and examination and expansion of the synthesis results.

FluoRender: joint freehand segmentation and visualization for many-channel fluorescence data analysis.

PubMed

Wan, Yong; Otsuna, Hideo; Holman, Holly A; Bagley, Brig; Ito, Masayoshi; Lewis, A Kelsey; Colasanto, Mary; Kardon, Gabrielle; Ito, Kei; Hansen, Charles

2017-05-26

Image segmentation and registration techniques have enabled biologists to place large amounts of volume data from fluorescence microscopy, morphed three-dimensionally, onto a common spatial frame. Existing tools built on volume visualization pipelines for single channel or red-green-blue (RGB) channels have become inadequate for the new challenges of fluorescence microscopy. For a three-dimensional atlas of the insect nervous system, hundreds of volume channels are rendered simultaneously, whereas fluorescence intensity values from each channel need to be preserved for versatile adjustment and analysis. Although several existing tools have incorporated support of multichannel data using various strategies, the lack of a flexible design has made true many-channel visualization and analysis unavailable. The most common practice for many-channel volume data presentation is still converting and rendering pseudosurfaces, which are inaccurate for both qualitative and quantitative evaluations. Here, we present an alternative design strategy that accommodates the visualization and analysis of about 100 volume channels, each of which can be interactively adjusted, selected, and segmented using freehand tools. Our multichannel visualization includes a multilevel streaming pipeline plus a triple-buffer compositing technique. Our method also preserves original fluorescence intensity values on graphics hardware, a crucial feature that allows graphics-processing-unit (GPU)-based processing for interactive data analysis, such as freehand segmentation. We have implemented the design strategies as a thorough restructuring of our original tool, FluoRender. The redesign of FluoRender not only maintains the existing multichannel capabilities for a greatly extended number of volume channels, but also enables new analysis functions for many-channel data from emerging biomedical-imaging techniques.

Measurement of breast volume using body scan technology(computer-aided anthropometry).

PubMed

Veitch, Daisy; Burford, Karen; Dench, Phil; Dean, Nicola; Griffin, Philip

2012-01-01

Assessment of breast volume is an important tool for preoperative planning in various breast surgeries and other applications, such as bra development. Accurate assessment can improve the consistency and quality of surgery outcomes. This study outlines a non-invasive method to measure breast volume using a whole body 3D laser surface anatomy scanner, the Cyberware WBX. It expands on a previous publication where this method was validated against patients undergoing mastectomy. It specifically outlines and expands the computer-aided anthropometric (CAA) method for extracting breast volumes in a non-invasive way from patients enrolled in a breast reduction study at Flinders Medical Centre, South Australia. This step-by-step description allows others to replicate this work and provides an additional tool to assist them in their own clinical practice and development of designs.

System analysis of a piston steam engine employing the uniflow principle, a study in optimized performance

NASA Technical Reports Server (NTRS)

Peoples, J. A.

1975-01-01

Results are reported which were obtained from a mathematical model of a generalized piston steam engine configuration employing the uniflow principal. The model accounted for the effects of clearance volume, compression work, and release volume. A simple solution is presented which characterizes optimum performance of the steam engine, based on miles per gallon. Development of the mathematical model is presented. The relationship between efficiency and miles per gallon is developed. An approach to steam car analysis and design is presented which has purpose rather than lucky hopefulness. A practical engine design is proposed which correlates to the definition of the type engine used. This engine integrates several system components into the engine structure. All conclusions relate to the classical Rankine Cycle.

A practical assessment of aquifer discharge for regional groundwater demand by characterizing leaky confined aquifer overlain on a Mesozoic granitic gneiss basement

NASA Astrophysics Data System (ADS)

Shih, David Ching-Fang

2018-04-01

Due to increasing population worldwide, there is an urgent need to manage these important but diminishing groundwater resources efficiently to ensure their continued availability. The major innovative design of this study is to provide a practical assessment process for groundwater discharge under a regional demand by characterizing the nature of leaky confined aquifers overlain on a Mesozoic granitic gneiss basement which involves the important groundwater system in the Kinmen region (Taiwan, ROC) and the assessment of adoptable groundwater discharge in aquifer is needed. The storage coefficient presents an order of one in a thousand and hydraulic conductivity is approximately at the order of 1-8 m/d and 0.4-0.9 m/d for aquifer and aquitard respectively. Groundwater discharge and admissible number of pumping well is suggested considering scheduled maximum groundwater volume and head decline change for eastern and western studied area respectively. The safety subjected to the conservative issue is then addressed by the use of scheduled maximum groundwater volume. It reveals that the safety can be ensured using the indicator as scheduled maximum groundwater volume with predefined scenarios. The result can be utilized practically for developing management strategy of groundwater resources due to the applicability and novel of method.

Techniques in Marriage and Family Counseling. Volume One. The Family Psychology and Counseling Series.

ERIC Educational Resources Information Center

Watts, Richard E., Ed.

This book is designed to bridge the gap between the reality of professional practice and what is being written about it in professional publications. It is divided into three sections, focusing on the techniques of assessment, transgenerational techniques, and constructivist techniques. Section one argues that assessment is the basis of all…

Problem Manual for Instructional Decision-Making Module; Volume 2: A Computer Assisted Instruction Module. Document Number 4.

ERIC Educational Resources Information Center

Bessent, E. Wailand; And Others

Provided in the manual are background material, problems, and worksheets designed for graduate students involved in a computer assisted instruction (CAI) approach to supervisor training. Included are a faculty handbook for a simulated school in a mythical community, a practice problem to familiarize the student with terminal operation, and eight…

The Education of Minority Groups. An Enquiry into Problems and Practices of Fifteen Countries.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

The essays in this volume seek to elucidate the policies and processes whereby groups of students in 15 (mainly industrialized) countries are designated as special, and differential treatment is legitimated, organized, and financed. Essays and authors are as follows: "An Overview of Experience in Fifteen Countries" (W. Donovan, A.…

Characteristics and Consequences of Adult Learning Methods and Strategies. Practical Evaluation Reports, Volume 2, Number 1

ERIC Educational Resources Information Center

Trivette, Carol M.; Dunst, Carl J.; Hamby, Deborah W.; O'Herin, Chainey E.

2009-01-01

The effectiveness of four adult learning methods (accelerated learning, coaching, guided design, and just-in-time training) constituted the focus of this research synthesis. Findings reported in "How People Learn" (Bransford et al., 2000) were used to operationally define six adult learning method characteristics, and to code and analyze…

Improving the Preparation of Professional Personnel for Vocational Education in Metropolitan Areas. Volume VII, Final Report.

ERIC Educational Resources Information Center

Righthand, Herbert

This institute was designed to study the needs and problems of vocational teaching in metropolitan areas and to recommend model teacher preparation practices. A total of 60 participants, representing 23 states, Washington, D.C., and the Virgin Islands, took part in this program, which consisted of general sessions, homogeneous and heterogeneous…

Allied Health Occupations II. Dental Assistant Component. Student Learning Guide. Middletown Public Schools Curriculum Standards.

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a second-year course in allied health occupations education that is designed to provide students with a practical understanding of the work done by dentists, dental hygienists, dental laboratory technicians, and dental assistants and also to help students acquire some basic dental assistant…

Europe: Language Arts around the World, Volume I. Cross Curricular Activities for Grades 4-6.

ERIC Educational Resources Information Center

Fuchs, Lucy

Suggesting that students in the intermediate grades can explore the world around them and practice valuable skills in spelling, reading, writing, communication, and language, this book presents cross-curricular units designed to integrate language-arts activities into the study of European cultures. The units in the book reach diverse needs by…

Small Farm Grain Storage. Appropriate Technologies for Development. Manual M-2.

ERIC Educational Resources Information Center

Lindblad, Carl; Druben, Laurel

Designed as a working and teaching tool for development workers in their field activities, this manual combines in one volume the basic principles of grain storage and the practical solutions currently being used and tested around the world to combat grain storage problems. Each of six sections begins with informative material on the topic to be…

A Course in Baluchi. Volume One.

ERIC Educational Resources Information Center

Barker, Muhammad Abd-al-Rahman; Mengal, Aqil Khan

This Baluchi text is intended for use in a one-year elementary course which meets (ideally) at least five classroom hours per week, with one or two more hours of practice in the language laboratory. It is designed to be used with a Baluchi native informant and a linguist, although the tapes prepared by the authors may, if necessary, replace the…

A COMPARISON OF MATHEMATICS PROGRAMS FOR ABLE JUNIOR HIGH SCHOOL STUDENTS, VOLUME 1 - FINAL REPORT.

ERIC Educational Resources Information Center

GOLDBERG, MIRIAM L.; AND OTHERS

THE TALENTED YOUTH PROJECT (TYP) MATHEMATICS STUDY WAS DESIGNED AS A STUDY TO COMPARE THE EFFECTIVENESS OF VARIOUS CURRICULUM PATTERNS AND PRACTICES IN MATHEMATICS EDUCATION CURRENTLY USED WITH ACADEMICALLY TALENTED JUNIOR HIGH SCHOOL STUDENTS. THE SAMPLE CONSISTED OF 51 CLASSES AND 6 MATHEMATICS PROGRAMS. THE LORGE-THORNDIKE VERBAL INTELLIGENCE…

Water quality of surface runoff and lint yield in cotton under furrow irrigation in Northeast Arkansas.

PubMed

Adviento-Borbe, M Arlene A; Barnes, Brittany D; Iseyemi, Oluwayinka; Mann, Amanda M; Reba, Michele L; Robertson, William J; Massey, Joseph H; Teague, Tina G

2018-02-01

Use of furrow irrigation in row crop production is a common practice through much of the Midsouth US and yet, nutrients can be transported off-site through surface runoff. A field study with cotton (Gossypium hirsutum, L.) was conducted to understand the impact of furrow tillage practices and nitrogen (N) fertilizer placement on characteristics of runoff water quality during the growing season. The experiment was designed as a randomized complete block design with conventional (CT) and conservation furrow tillage (FT) in combination with either urea (URN) broadcast or 32% urea ammonium nitrate (UAN) injected, each applied at 101kgNha -1 . Concentrations of ammonium (NH 4 -N), nitrate (NO 3 -N), nitrite (NO 2 -N), and dissolved phosphorus (P) in irrigation runoff water and lint yields were measured in all treatments. The intensity and chemical form of nutrient losses were primarily controlled by water runoff volume and agronomic practice. Across tillage and fertilizer N treatments, median N concentrations in the runoff were <0.3mgNL -1 , with NO 3 -N being relatively the highest among N forms. Concentrations of runoff dissolved P were <0.05mgPL -1 and were affected by volume of runoff water. Water pH, specific electrical conductivity, alkalinity and hardness were within levels that common to local irrigation water and less likely to impair pollution in waterways. Lint yields averaged 1111kgha -1 and were higher (P-value=0.03) in FT compared to CT treatments. Runoff volumes across irrigation events were greater (P-value=0.02) in CT than FT treatments, which increased NO 3 -N mass loads in CT treatments (394gNO 3 -Nha -1 season -1 ). Nitrate-N concentrations in CT treatments were still low and pose little threat to N contaminations in waterways. The findings support the adoption of conservation practices for furrow tillage and N fertilizer placement that can reduce nutrient runoff losses in furrow irrigation systems. Published by Elsevier B.V.

Current Launch Vehicle Practice and Data Base Assessment. Volume 1. Executive Summary and Report Body

DTIC Science & Technology

1989-06-01

resulted in an increase of the intermediate seal purge pressure, revised redlines, and a design change from a lift-off seal to a labyrinth seal design. This...engine 0003 caused fa&i!ure of the primary lox seal and an uncontained engine fire. The redline cut was set by a HPOTP overspeed. This failure...occurred as a result of undetected internal HEX damage caused during arc welding which resulted in an engine fire. HEX coil leakage resulted in an

Development of a Super-Pressure Balloon with an Improved Design

NASA Astrophysics Data System (ADS)

Izutsu, Naoki; Akita, Daisuke; Fuke, Hideyuki; Iijima, Issei; Kato, Yoichi; Kawada, Jiro; Matsushima, Kiyoho; Matsuzaka, Yukihiko; Mizuta, Eiichi; Nakada, Takashi; Nonaka, Naoki; Saito, Yoshitaka; Takada, Atsushi; Tamura, Keisuke; Yamada, Kazuhiko; Yoshida, Tetsuya

A zero-pressure balloon used for scientific observation in the stratosphere has an unmanageable limitation that its floating altitude decreases during a nighttime because of temperature drop of the lifting gas. Since a super-pressure balloon may not change its volume, the lifetime can extend very long. We had introduced so called the ‘lobed-pumpkin’ type of super-pressure balloon that can realize a full-scale long-duration balloon and it will be in practical use in the very near future. As for larger super-pressure balloons, however, we still have some potential difficulties to be resolved. We here propose a new design suitable for a larger super-pressure balloon, which is roughly ‘lobed pumpkin with lobed cylinder’ and can adapt a single design for balloons of a wide range of volumes. Indoor inflation tests were successfully carried out with balloons designed and made by the method. It has been shown that the limit of the resisting pressure differential for a new designed balloon is same as that of a normal lobed-pumpkin balloon.

Thyroid Volume and Its Relation to Anthropometric Measures in a Healthy Cuban Population

PubMed Central

Turcios, Silvia; Lence-Anta, Juan J.; Santana, Jose-Luis; Pereda, Celia M.; Velasco, Milagros; Chappe, Mae; Infante, Idalmis; Bustillo, Marlene; García, Anabel; Clero, Enora; Maillard, Stephane; Rodriguez, Regla; Xhaard, Constance; Ren, Yan; Rubino, Carole; Ortiz, Rosa M.; de Vathaire, Florent

2015-01-01

Objectives The aim of this study was to describe the thyroid volume in healthy adults by ultrasound and to correlate this volume with some anthropometric measures and other differentiated thyroid cancer risk factors. Study Design Thyroid volume and anthropometric measures were recorded in a sample of 100 healthy adults, including 21 men and 79 women aged 18-50 years, living in a non-iodine-deficient area of Havana city. Results The average thyroid volume was 6.6 ± 0.26 ml; it was higher in men (7.3 ml) than in women (6.4 ml; p = 0.15). In the univariate analysis, thyroid volume was correlated with all anthropometric measures, but in the multivariate analysis, body surface area was found to be the only significant anthropometric parameter. Thyroid volume was also higher in current or former smokers and in persons with blood group AB or B. Conclusion Specific reference values of thyroid volume as a function of body surface area could be used for evaluating thyroid volume in clinical practice. The relation between body surface area and thyroid volume is coherent with what is known about the relation of thyroid volume to thyroid cancer risk, but the same is not true about the relation between thyroid volume and smoking habit. PMID:25960963

Lower Mortality for Abdominal Aortic Aneurysm Repair in High-Volume Hospitals Is Contingent upon Nurse Staffing

PubMed Central

Wiltse Nicely, Kelly L; Sloane, Douglas M; Aiken, Linda H

2013-01-01

Objective To determine whether and to what extent the lower mortality rates for patients undergoing abdominal aortic aneurysm (AAA) repair in high-volume hospitals is explained by better nursing. Data Sources State hospital discharge data, Multi-State Nursing Care and Patient Safety Survey, and hospital characteristics from the AHA Annual Survey. Study Design Cross-sectional analysis of linked patient outcomes for individuals undergoing AAA repair in four states. Data Collection Secondary data sources. Principal Findings Favorable nursing practice environments and higher hospital volumes of AAA repair are associated with lower mortality and fewer failures-to-rescue in main-effects models. Furthermore, nurse staffing interacts with volume such that there is no mortality advantage observed in high-volume hospitals with poor nurse staffing. When hospitals have good nurse staffing, patients in low-volume hospitals are 3.4 times as likely to die and 2.6 times as likely to die from complications as patients in high-volume hospitals (p < .001). Conclusions Nursing is part of the explanation for lower mortality after AAA repair in high-volume hospitals. Importantly, lower mortality is not found in high-volume hospitals if nurse staffing is poor. PMID:23088426

Pyrotechnic Panel Minutes. Volume 13, Numbers 518-579

DTIC Science & Technology

1946-11-01

fron 5.3.1*6 to 29.10.1*6. Lt. Cdr. M. P. Price , (D.M.O.) from 13.7.1*6. Mr. P. Trier, R.N. (D.N.O.) from 1.1*.1*6. Lt. Col. 0. H...34. Aluminium Cases. Designs and Production . 538 Bomb, Practice, A/C) 10_lb. Nk.IV, Flame. Leakage Test. 539 S.3.432 filling for dockets...Signal and Target Practice. Climatic Trials: Abolition of T7ar Production Permits. DS 82227/1 3 Minute _ , . , PJ. No. SubJect 544

Aircraft IR/acoustic detection evaluation. Volume 2: Development of a ground-based acoustic sensor system for the detection of subsonic jet-powered aircraft

NASA Technical Reports Server (NTRS)

Kraft, Robert E.

1992-01-01

The design and performance of a ground-based acoustic sensor system for the detection of subsonic jet-powered aircraft is described and specified. The acoustic detection system performance criteria will subsequently be used to determine target detection ranges for the subject contract. Although the defined system has never been built and demonstrated in the field, the design parameters were chosen on the basis of achievable technology and overall system practicality. Areas where additional information is needed to substantiate the design are identified.

Resonator Optical Designs For Free Electron Lasers

NASA Astrophysics Data System (ADS)

Viswanathan, V. K.; Saxman, A.; Woodfin, G.

1985-11-01

The output beam from free-electron lasers tends to be a thin, pencil-like beam because of the nature of the gain volume. For moderate power devices, mirror damage considerations imply that the beam has to travel many meters before it can expand enough to allow retro-reflection from state-of-the-art mirrors. However, use of grazing incidence optics can resolve the problem of damage to the optical elements and result in a cavity of reasonable dimensions. The optical design considerations for such resonators are addressed in this paper. A few of the practical resonator designs approaching diffraction limited performance are presented.

Resonator optical designs for free electron lasers

NASA Astrophysics Data System (ADS)

Viswanathan, V. K.; Saxman, A.; Woodfin, G.

1985-03-01

The output beam from free-electron lasers tends to be a thin, pencil-like beam because of the nature of the gain volume. For moderate power devices, mirror damage considerations imply that the beam has to travel many meters before it can expand enough to allow retro-reflection from state-of-the-art mirrors. However, use of grazing incidence optics can resolve the problem of damage to the optical elements and result in a cavity of reasonable dimensions. The optical design considerations for such resonators are discussed. A few of the practical resonator designs approaching diffraction limited performance are presented.

Systems-level study of a nonsurvivable Jupiter turbopause probe. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Wiltshire, R. S.

1972-01-01

The design of a space probe to explore the atmosphere of the planet Jupiter is discussed. Five major areas were considered: (1) definition of science requirements, (2) mission evaluation, (3) definition of probe system, (4) definition of spacecraft support requirements, and (5) nonequilibrium flow field analysis for communications blackout evaluation. The overall mission and system design are emphasized. The integration of the various technologies into complete systems designs is described. Results showed that a nonsurvivable turbopause probe mission to Jupiter with adequate data return to meet the science objectives is feasible and practical.

Effectiveness of Cooperative Learning Instructional Tools With Predict-Observe-Explain Strategy on the Topic of Cuboid and Cube Volume

NASA Astrophysics Data System (ADS)

Nurhuda; Lukito, A.; Masriyah

2018-01-01

This study aims to develop instructional tools and implement it to see the effectiveness. The method used in this research referred to Designing Effective Instruction. Experimental research with two-group pretest-posttest design method was conducted. The instructional tools have been developed is cooperative learning model with predict-observe-explain strategy on the topic of cuboid and cube volume which consist of lesson plans, POE tasks, and Tests. Instructional tools were of good quality by criteria of validity, practicality, and effectiveness. These instructional tools was very effective for teaching the volume of cuboid and cube. Cooperative instructional tool with predict-observe-explain (POE) strategy was good of quality because the teacher was easy to implement the steps of learning, students easy to understand the material and students’ learning outcomes completed classically. Learning by using this instructional tool was effective because learning activities were appropriate and students were very active. Students’ learning outcomes were completed classically and better than conventional learning. This study produced a good instructional tool and effectively used in learning. Therefore, these instructional tools can be used as an alternative to teach volume of cuboid and cube topics.

Integrating Human Factors into Crew Exploration Vehicle Design

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Baggerman, Susan; Campbell, paul

2007-01-01

With NASA's new Vision for Exploration to send humans beyond Earth orbit, it is critical to consider the human as a system that demands early and continuous user involvement, and an iterative prototype/test/redesign process. Addressing human-system interface issues early on can be very cost effective even cost reducing when performed early in the design and development cycle. To achieve this goal within Crew Exploration Vehicle (CEV) Project Office, human engineering (HE) team is formed. Key tasks are to apply HE requirements and guidelines to hardware/software, and provide HE design, analysis and evaluation of crew interfaces. Initial activities included many practice-orientated evaluations using low-fidelity CEV mock-ups. What follows is a description of such evaluations that focused on a HE requirement regarding Net Habitable Volume (NHV). NHV is defined as the total remaining pressurized volume available to on-orbit crew after accounting for the loss of volume due to deployed hardware and structural inefficiencies which decrease functional volume. The goal of the NHV evaluations was to develop requirements providing sufficient CEV NHV for crewmembers to live and perform tasks in support of mission goals. Efforts included development of a standard NHV calculation method using computer models and physical mockups, and crew/ stakeholder evaluations. Nine stakeholders and ten crewmembers participated in the unsuited evaluations. Six crewmembers also participated in a suited evaluation. The mock-up was outfitted with volumetric representation of sub-systems such as seats, and stowage bags. Thirteen scenarios were developed to represent mission/crew tasks and considered to be primary volume drivers (e.g., suit donning) for the CEV. Unsuited evaluations included a structured walkthrough of these tasks. Suited evaluations included timed donning of the existing launch and entry suit to simulate a contingency scenario followed by doffing/ stowing of the suits. All mockup evaluations were videotaped. Structured questionnaires were used to document user interface issues and volume impacts of layout configuration. Computer model and physical measures of the NHV agreed within 1 percent. This included measurement of the gross habitable volume, subtraction of intrusive volumes, and other non-habitable spaces. Calculation method developed was validated as a standard means of measuring NHV, and was recommended as a verification method for the NHV requirements. Evaluations confirmed that there was adequate volume for unsuited scenarios and suit donning/ doffing activity. Seats, suit design stowage and waste hygiene system noted to be critical volume drivers. The low-fidelity mock-up evaluations along with human modeling analysis generated discussions that will lead to high-level systems requirements and human-centered design decisions. This approach allowed HE requirements and operational concepts to evolve in parallel with engineering system concepts and design requirements. As the CEV design matures, these evaluations will continue and help with design decisions, and assessment, verification and validation of HE requirements.

Standardized development of computer software. Part 1: Methods

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

This work is a two-volume set on standards for modern software engineering methodology. This volume presents a tutorial and practical guide to the efficient development of reliable computer software, a unified and coordinated discipline for design, coding, testing, documentation, and project organization and management. The aim of the monograph is to provide formal disciplines for increasing the probability of securing software that is characterized by high degrees of initial correctness, readability, and maintainability, and to promote practices which aid in the consistent and orderly development of a total software system within schedule and budgetary constraints. These disciplines are set forth as a set of rules to be applied during software development to drastically reduce the time traditionally spent in debugging, to increase documentation quality, to foster understandability among those who must come in contact with it, and to facilitate operations and alterations of the program as requirements on the program environment change.

Attitudes and barriers to evidence-based practice in optometry educators.

PubMed

Suttle, Catherine M; Challinor, Kirsten L; Thompson, Rachel E; Pesudovs, Konrad; Togher, Leanne; Chiavaroli, Neville; Lee, Adrian; Junghans, Barbara; Stapleton, Fiona; Watt, Kathleen; Jalbert, Isabelle

2015-04-01

Evidence-based practice (EBP) is an essential component of good quality, patient-centered health care. This requires practitioners to acquire EBP skills and knowledge during undergraduate and continuing education. Evidence-based practice education exists in a range of health care disciplines, including optometry. Evidence-based practice education, however, depends on relevant skills and knowledge in educators. Courses and workshops exist for the development of EBP teaching skills in some areas of health care but not in optometry. Here, we describe a pilot workshop designed to enhance the teaching of EBP and to investigate the perspectives of optometric educators on EBP including their attitudes and perceived barriers to EBP and its teaching. Twenty-seven optometric educators including 8 facilitators participated. Of these, 14 were academics (including the 8 facilitators) and 13 were practitioners. Evidence-based practice attitudes were assessed using the Evidence-Based Practice Attitude Scale-50 with appropriate modifications for optometry. Workshop design incorporated strategies to trigger discussion among participants. A nominal group technique was used to identify, prioritize, and reach consensus on barriers to EBP. Although some participants expressed reservations about EBP, a common understanding of the contemporary definition of EBP emerged in educators. Thirty-five barriers to EBP were identified; "time" was selected in the top five barriers by most participants and attracted the highest total score, well above any other barrier (negative attitude to EBP, volume of evidence, integration with clinical practice, and lack of lifelong learning mind-set). Attitudes toward EBP were generally positive and negatively correlated with age and time since graduation, respectively. A group of optometrists and academics new to implementing education in EBP displayed positive attitudes to EBP but considered that its application and teaching could be significantly hindered by a lack of time to access and appraise the large volume of available research evidence in the field of eye care.

Practical approaches to four-dimensional heavy-charged-particle lung therapy.

PubMed

Mori, Shinichiro; Wu, Ziji; Folkert, Michael R; Kumagai, Motoki; Dobashi, Suguru; Sugane, Toshio; Baba, Masayuki

2010-01-01

We have developed new design algorithms for compensating boli to facilitate the implementation of four-dimensional charged-particle lung therapy in clinical applications. Four-dimensional CT (4DCT) data for eight lung cancer patients were acquired with a 16-slice CT under free breathing. Six compensating boli were developed that may be categorized into three classes: (1) boli-based on contoured gross tumor volumes (GTV) from a 4DCT data set during each respiratory phase, subsequently combined into one (GTV-4DCT bolus); (2) boli-based on contoured internal target volume (ITV) from image-processed 3DCT data only [temporal-maximum-intensity-projection (TMIP)/temporal-average-intensity-projection (TAIP)] with calculated boli (ITV-TMIP and ITV-TAIP boli); and (3) boli-based on contoured ITV utilizing image-processed 3DCT data, applied to 4DCT for design of boli for each phase, which were then combined. The carbon beam dose distribution within each bolus was calculated as a function of time and compared to plans in which respiratory-ungated/gated strategies were used. The GTV-4DCT treatment plan required a prohibitively long time for contouring the GTV manually for each respiratory phase, but it delivered more than 95% of the prescribed dose to the target volume. The TMIP and TAIP treatments, although more time-efficient, resulted in an unacceptable excess dose to normal tissues and underdosing of the target volume. The dose distribution for the ITV-4DCT bolus was similar to that for the GTV-4DCT bolus and required significantly less practitioner time. The ITV-4DCT bolus treatment plan is time-efficient and provides a high-quality dose distribution, making it a practical alternative to the GTV-4DCT bolus treatment plan.

Electro-mechanical probe positioning system for large volume plasma device

NASA Astrophysics Data System (ADS)

Sanyasi, A. K.; Sugandhi, R.; Srivastava, P. K.; Srivastav, Prabhakar; Awasthi, L. M.

2018-05-01

An automated electro-mechanical system for the positioning of plasma diagnostics has been designed and implemented in a Large Volume Plasma Device (LVPD). The system consists of 12 electro-mechanical assemblies, which are orchestrated using the Modbus communication protocol on 4-wire RS485 communications to meet the experimental requirements. Each assembly has a lead screw-based mechanical structure, Wilson feed-through-based vacuum interface, bipolar stepper motor, micro-controller-based stepper drive, and optical encoder for online positioning correction of probes. The novelty of the system lies in the orchestration of multiple drives on a single interface, fabrication and installation of the system for a large experimental device like the LVPD, in-house developed software, and adopted architectural practices. The paper discusses the design, description of hardware and software interfaces, and performance results in LVPD.

Attention Deficit Hyperactivity Disorder in Preschool Aged Children. Clinical Approaches to Early Intervention in Child and Adolescent Mental Health, Volume 1.

ERIC Educational Resources Information Center

Hazell, Philip

The need for guidelines for early intervention of children experiencing Attention Deficit Hyperactivity Disorders (ADHD) was identified by the Australian Early Intervention Network (AusEinet). This document attempts to guide appropriate practice in the care of children and adolescents with ADHD. The guidelines are designed to provide information…

Reflective Practice: The Scholarship of Teaching and Learning. The CEET Faculty Development Program on Teaching and Learning. Second Edition: 2009 College Portfolio. Volumes I-IV

ERIC Educational Resources Information Center

Scarborough, Jule Dee

2009-01-01

"2009 Portfolio: The Second Edition of the College of Engineering's Portfolio" presents the 2009 Faculty Development Program on Teaching & Learning (TL) new content, modified models, new process and procedures, especially the new Instructional Analysis and Design Process Map, new PowerPoint presentations, modified teaching and…

Practical Law in Utah, Second Edition. Utah Supplement to Street Law.

ERIC Educational Resources Information Center

Astin, Katherine, Ed.; And Others

This guide on law education is designed for high school students. Objectives are to give a fundamental understanding of Utah law in those areas that may be encountered personally, show how laws are made, and explain what to do if you become involved with the law. This volume is arranged in seven chapters. Topics include: (1) an introduction to…

Reliability Abstracts and Technical Reviews January - December 1970. Volume 10, Nos. 1-12; R70-14805 - R70-15438

NASA Technical Reports Server (NTRS)

1970-01-01

Reliability Abstracts and Technical Reviews is an abstract and critical analysis service covering published and report literature on reliability. The service is designed to provide information on theory and practice of reliability as applied to aerospace and an objective appraisal of the quality, significance, and applicability of the literature abstracted.

Common Core State Standards for Literacy in History/Social Studies, Science, and Technical Subjects for English Language Learners

ERIC Educational Resources Information Center

de Oliveira, Luciana C., Ed.

2016-01-01

This volume in the Common Core State Standards (CCSS) for English Language Learners series was designed to deepen teacher's knowledge and provides instructional approaches and practices for supporting grades 6-12 ELLs as they meet the ambitious expectations of the CCSS for Literacy in History/Social Studies, Science, and Technical Subjects. This…

Ecology and the Environment. Language Arts around the World, Volume V. Cross-Curricular Activities for Grades 4-6.

ERIC Educational Resources Information Center

McAllister, Elizabeth A.; Hildebrand, Joan M.; Ericson, Joann H.

Suggesting that students in the intermediate grades can explore the world around them and practice valuable skills in spelling, reading, writing, communication, and language, this book presents cross-curricular units designed to integrate language-arts activities into the study of ecology and the environment. The units in the book reach diverse…

The Imperative Educational Network: Parents, Teachers, and Concerned Individuals. Volume 2. Proceedings of the Imperative Educational Network Conference (Athens, Georgia, 1990).

ERIC Educational Resources Information Center

Tomlinson, Louise M., Ed.

This conference was designed to provide a forum for the exchange of ideas on how parents, teachers, and other concerned individuals can contribute to strengthening the educational support system, and to generate practical information on strategies to improve achievement levels of youth. The first article, titled "Conference Program…

Allied Health Occupations II. Physical Therapy Aide Component. Student Learning Guide. Middletown Public Schools Curriculum Standards.

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a second-year course in allied health occupations education that is designed to provide students with a practical understanding of the work done by physical therapists and physical therapy assistants. Addressed in the individual units of the course are the following topics: the health team for…

Making Schools Work: Practical Management of Support Operations. Successful Schools: Guidebooks to Effective Educational Leadership. Volume 7.

ERIC Educational Resources Information Center

Poston, William K., Jr.; And Others

This book is designed to help the school administrator optimize support services for a successful school. Chapter 1 describes how to foster school quality through community and staff involvement. Chapter 2 shows how to schedule and configure the school for achievement, particularly for meeting the diverse needs of diverse students. The third…

Experimental Research in TV Instruction. Proceedings of an International Conference (4th, St. John's, Newfoundland, Canada, September 28-30, 1981). Volume 4.

ERIC Educational Resources Information Center

Baggaley, Jon, Ed.; Janega, Patti, Ed.

An introduction by Jon Baggaley provides background information on this international conference and its participants, and introduces 10 papers which were presented. The papers are as follows: (1) "Teaching Production Research and Design: The Interface of Theory and Practice" (James M. Linton); (2) "The Impact of Television on…

Recognized focused practice: Does sub-specialty designation offer value to the neurosurgeon?

PubMed

Babu, Maya A; Liau, Linda M; Meyer, Fredric B

2017-01-01

Vehicles for life-long assessment such as Maintenance of Certification tend to focus on generalist neurosurgical knowledge. However, as neurosurgeons advance in their careers, they tend to narrow their practice and increase volumes in certain specific types of operations. Failing to test the type of procedures most relevant to the practitioner is a lost opportunity to improve the knowledge and practice of the individual neurosurgeon. In this study, we assess the neurosurgical community's appetite for designations of board-recognized Recognized Focused Practice (RFP). We administered a validated, online, confidential survey to 4,899 neurosurgeons (2,435 American Board of Neurological Surgery (ABNS) Diplomates participating in MOC, 1,440 Diplomates certified prior to 1999 (grandfathered), and 1,024 retired Diplomates). We received 1,449 responses overall (30% response rate). A plurality of respondents were in practice 11-15 years (18.5%), in private practice (40%) and participate in MOC (61%). 49% of respondents felt that a RFP designation would not be helpful. For the 30% who felt that RFP would be helpful, 61.3% felt that it would support recognition by their hospital or practice, it would motivate them to stay current on medical knowledge (53.4%), or it would help attract patients (46.4%;). The most popular suggestions for RFP were Spine (56.2%), Cerebrovascular (62.9%), Pediatrics (64.1%), and Functional/Stereotactic (52%). A plurality of neurosurgeons (35.7%) felt that RFP should recognize neurosurgeons with accredited and non-accredited fellowship experience and sub-specialty experience. Ultimately, Recognized Focused Practice may provide value to individual neurosurgeons, but the neurosurgical community shows tepid interest for pursuing this designation.

Recognized focused practice: Does sub-specialty designation offer value to the neurosurgeon?

PubMed Central

Liau, Linda M.; Meyer, Fredric B.

2017-01-01

Vehicles for life-long assessment such as Maintenance of Certification tend to focus on generalist neurosurgical knowledge. However, as neurosurgeons advance in their careers, they tend to narrow their practice and increase volumes in certain specific types of operations. Failing to test the type of procedures most relevant to the practitioner is a lost opportunity to improve the knowledge and practice of the individual neurosurgeon. In this study, we assess the neurosurgical community’s appetite for designations of board-recognized Recognized Focused Practice (RFP). We administered a validated, online, confidential survey to 4,899 neurosurgeons (2,435 American Board of Neurological Surgery (ABNS) Diplomates participating in MOC, 1,440 Diplomates certified prior to 1999 (grandfathered), and 1,024 retired Diplomates). We received 1,449 responses overall (30% response rate). A plurality of respondents were in practice 11–15 years (18.5%), in private practice (40%) and participate in MOC (61%). 49% of respondents felt that a RFP designation would not be helpful. For the 30% who felt that RFP would be helpful, 61.3% felt that it would support recognition by their hospital or practice, it would motivate them to stay current on medical knowledge (53.4%), or it would help attract patients (46.4%;). The most popular suggestions for RFP were Spine (56.2%), Cerebrovascular (62.9%), Pediatrics (64.1%), and Functional/Stereotactic (52%). A plurality of neurosurgeons (35.7%) felt that RFP should recognize neurosurgeons with accredited and non-accredited fellowship experience and sub-specialty experience. Ultimately, Recognized Focused Practice may provide value to individual neurosurgeons, but the neurosurgical community shows tepid interest for pursuing this designation. PMID:29240838

Practical holography III; Proceedings of the Meeting, Los Angeles, CA, Jan. 17, 18, 1989

NASA Astrophysics Data System (ADS)

Benton, Stephen A.

Various papers on practical holography are presented. Individual topics addressed include: design of large format commercial display holograms, design of a one-step full-color holographic recording system, color reflection holography, full color rainbow hologram using a photoresist plate, secondary effects in processing holograms, archival properties of holograms, survey of properties of volume holographic materials, image stability of DMP-128 holograms, activation monitor for DMP-128, microwave drying effects on dichromated gelatin holograms, sensitization process of dichromated gelatin, holographic optics for vision systems, holographic fingerprint sensor, cross-talk and cross-coupling in multiplexed holographic gratings, compact illuminators for transmission holograms, solar holoconcentrators in dichromated grains, three-dimensional display of scientific data, holographic liquid crystal displays, in situ swelling for hologaphic color control.

Ageing and endurance training effects on quantity and quality of pulmonary vascular bed in healthy men

PubMed Central

2014-01-01

It has recently been demonstrated that in healthy individuals, peak oxygen consumption is associated with a greater pulmonary capillary blood volume and a more distensible pulmonary circulation. Our cross-sectional study suggests that, in healthy men aged 20 to 60 years (n = 63), endurance sport practice (vigorous-intensity domain of the International Physical Activity Questionnaire) is associated with better quantity (pulmonary capillary blood volume) and quality (slope of increase in lung diffusion for carbon monoxide on exercise) of the pulmonary vascular bed, partly counterbalancing the deleterious effects of ageing, which remains to be demonstrated in a prospective longitudinal design. PMID:24460636

Special Report on Lessons Learned (1985-2011). Volume 2: Handbook of Recommended Design Practices (Fire Protection and Life Safety Design Guidelines for Special Purpose Underground Structures)

DTIC Science & Technology

2012-10-01

mounted pads (also called a raft, bed, platform or floating deck depending on the A & E company’s terminology preference). Combinations of each of...these are frequently employed which is most common where a shock mounted pad is installed. Shock mounting each piece of equipment is self...when a UGF uses shock mounted pads for its major equipment spaces, but does not put all fire protection equipment on the pad . A shock mounted pad

Phase 3 study of selected tether applications in space. Volume 2: Study results

NASA Technical Reports Server (NTRS)

1986-01-01

Engineering designs were developed relative to a tethered launch assist from the Shuttle for payloads up to 10,000 kg mass and the tethering of a 15,000 kg science platform from the space station. These designs are used for a cost benefit analysis which assesses the feasibility of using such systems as a practical alternative to what would otherwise be accomplished by conventional means. The term conventional as related to both these applications is intended to apply to the use of some form(s) of chemical propulsion system.

Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode

PubMed Central

Liu, Yayuan; Lin, Dingchang; Liang, Zheng; Zhao, Jie; Yan, Kai; Cui, Yi

2016-01-01

Lithium metal is the ideal anode for the next generation of high-energy-density batteries. Nevertheless, dendrite growth, side reactions and infinite relative volume change have prevented it from practical applications. Here, we demonstrate a promising metallic lithium anode design by infusing molten lithium into a polymeric matrix. The electrospun polyimide employed is stable against highly reactive molten lithium and, via a conformal layer of zinc oxide coating to render the surface lithiophilic, molten lithium can be drawn into the matrix, affording a nano-porous lithium electrode. Importantly, the polymeric backbone enables uniform lithium stripping/plating, which successfully confines lithium within the matrix, realizing minimum volume change and effective dendrite suppression. The porous electrode reduces the effective current density; thus, flat voltage profiles and stable cycling of more than 100 cycles is achieved even at a high current density of 5 mA cm−2 in both carbonate and ether electrolyte. The advantages of the porous, polymeric matrix provide important insights into the design principles of lithium metal anodes. PMID:26987481

Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode

DOE PAGES

Liu, Yayuan; Lin, Dingchang; Liang, Zheng; ...

2016-03-18

Lithium metal is the ideal anode for the next generation of high-energy-density batteries. Nevertheless, dendrite growth, side reactions and infinite relative volume change have prevented it from practical applications. Here, we demonstrate a promising metallic lithium anode design by infusing molten lithium into a polymeric matrix. The electrospun polyimide employed is stable against highly reactive molten lithium and, via a conformal layer of zinc oxide coating to render the surface lithiophilic, molten lithium can be drawn into the matrix, affording a nano-porous lithium electrode. Importantly, the polymeric backbone enables uniform lithium stripping/plating, which successfully confines lithium within the matrix, realizingmore » minimum volume change and effective dendrite suppression. The porous electrode reduces the effective current density; thus, flat voltage profiles and stable cycling of more than 100 cycles is achieved even at a high current density of 5 mA cm -2 in both carbonate and ether electrolyte. Furthermore, the advantages of the porous, polymeric matrix provide important insights into the design principles of lithium metal anodes.« less

Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yayuan; Lin, Dingchang; Liang, Zheng

Lithium metal is the ideal anode for the next generation of high-energy-density batteries. Nevertheless, dendrite growth, side reactions and infinite relative volume change have prevented it from practical applications. Here, we demonstrate a promising metallic lithium anode design by infusing molten lithium into a polymeric matrix. The electrospun polyimide employed is stable against highly reactive molten lithium and, via a conformal layer of zinc oxide coating to render the surface lithiophilic, molten lithium can be drawn into the matrix, affording a nano-porous lithium electrode. Importantly, the polymeric backbone enables uniform lithium stripping/plating, which successfully confines lithium within the matrix, realizingmore » minimum volume change and effective dendrite suppression. The porous electrode reduces the effective current density; thus, flat voltage profiles and stable cycling of more than 100 cycles is achieved even at a high current density of 5 mA cm -2 in both carbonate and ether electrolyte. Furthermore, the advantages of the porous, polymeric matrix provide important insights into the design principles of lithium metal anodes.« less

Connecting Research, Policy, and Practice. Review of Adult Learning and Literacy, Volume 7

ERIC Educational Resources Information Center

Comings, John, Ed.; Garner, Barbara, Ed.; Smith, Christine, Ed.

2007-01-01

"Review of Adult Learning and Literacy: Connecting Research, Policy, and Practice, Volume 7" is the newest volume in a series of annual publications of the National Center for the Study of Adult Learning and Literacy (NCSALL) that address major issues, the latest research, and the best practices in the field of adult literacy and…

Handbook of Parenting. Volume 5: Practical Issues in Parenting. Second Edition.

ERIC Educational Resources Information Center

Bornstein, Marc H., Ed.

Concerned with practical aspects of meeting children's needs, this volume, the fifth of five on parenting, describes the nuts and bolts of parenting as well as the promotion of positive parenting practices. The volume consists of the following 19 chapters: (1) "The Ethics of Parenting" (Diana Baumrind and Ross A. Thompson; (2) "Parenting and…

Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter.

PubMed

Ashuri, Maziar; He, Qianran; Shaw, Leon L

2016-01-07

Silicon has attracted huge attention in the last decade because it has a theoretical capacity ∼10 times that of graphite. However, the practical application of Si is hindered by three major challenges: large volume expansion during cycling (∼300%), low electrical conductivity, and instability of the SEI layer caused by repeated volume changes of the Si material. Significant research efforts have been devoted to addressing these challenges, and significant breakthroughs have been made particularly in the last two years (2014 and 2015). In this review, we have focused on the principles of Si material design, novel synthesis methods to achieve such structural designs, and the synthesis-structure-performance relationships to enhance the properties of Si anodes. To provide a systematic overview of the Si material design strategies, we have grouped the design strategies into several categories: (i) particle-based structures (containing nanoparticles, solid core-shell structures, hollow core-shell structures, and yolk-shell structures), (ii) porous Si designs, (iii) nanowires, nanotubes and nanofibers, (iv) Si-based composites, and (v) unusual designs. Finally, our personal perspectives on outlook are offered with an aim to stimulate further discussion and ideas on the rational design of durable and high performance Si anodes for the next generation Li-ion batteries in the near future.

The Role of Experience in the Behavioral Development of Human Infants: Current Status and Recommendations.

ERIC Educational Resources Information Center

White, Burton L.

This paper is designed as an information guide for those persons responsible for rearing human infants from birth to 18 months. The author provides an extensive review of the literature and trends of research in this area noting that the current volumes of knowledge in this area are not yet dependable enough to provide reliable bases for practice.…

Youth Attitude Tracking Study. Volume 1. Spring 1978.

DTIC Science & Technology

1978-08-01

promotional materials, recruiting practices, and advertising strategy . Study Design In the present wave, interviewing was conducted on a monthly basis, with...Habits Since the first wave, this study has attempted to provide guidance in the development of advertising strategies . In an attempt to provide further...input to the creation of advertising strategies , respondents were * " . asked a series of questions dealing with magazine readership and television

Hypersonics. Volume 1 - Defining the hypersonic environment; Proceedings of the First Joint Europe/U.S. Short Course on Hypersonics, Paris, France, Dec. 7-11, 1987

NASA Astrophysics Data System (ADS)

Bertin, John J.; Glowinski, Roland; Periaux, Jacques

1989-05-01

The present work discusses the general characterization of hypersonic flows, the hypersonic phenomena to be encountered by the Hermes spacecraft, industrial methodologies for the design of hypersonic vehicles, the definition of aerodynamic methodology, and hypersonic airbreathing-propulsion vehicle design practices applicable to the U.S. National Aerospace Plane. Also discussed are real gas effects in the hypersonic regime, the influence of thermochemistry and of nonequilibrium and surface catalysis on hypersonic vehicle design, the modelling of nonequilibrium effects in high speed flows, air-dissociation thermochemistry, and rarefied gas dynamics effects for spacecraft.

International Linear Collider Technical Design Report (Volumes 1 through 4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison M.

2013-03-27

The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

Engine System Loads Analysis Compared to Hot-Fire Data

NASA Technical Reports Server (NTRS)

Frady, Gregory P.; Jennings, John M.; Mims, Katherine; Brunty, Joseph; Christensen, Eric R.; McConnaughey, Paul R. (Technical Monitor)

2002-01-01

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the NASA MC-1 engine program, the focus was to reduce the cost-to-weight ratio. The techniques for structural dynamics analysis practices, were tailored in this program to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of MC-1 load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are important during the design and integration of a new engine system. During the final stages of development, it is important to verify the results of an engine system model to determine the validity of the results. During the final stages of the MC-1 program, hot-fire test results were obtained and compared to the structural design loads calculated by the engine system model. These comparisons are presented in this paper.

Bilingual Preschools. Volume 2: Best Practices

ERIC Educational Resources Information Center

Kersten, Kristin, Ed.; Rohde, Andreas, Ed.; Schelletter, Christina, Ed.; Steinlen, Anja K., Ed.

2010-01-01

Drawing on data from eleven preschools in four European countries (Germany, Belgium, Sweden, and the UK), this edited volume explores the progress of preschool children learning English over a period of two years. This edited volume (Volume II) gives details on best practices in bilingual preschools as well as background and training on topics…

Snow and Ice Control Materials for Texas Roads; VOLUME 1: Literature and Best Practices Review; VOLUME 2: Field Trials and Laboratory Study

DOT National Transportation Integrated Search

2017-03-01

This report provides findings from a four-year research study of snow and ice control materials for winter weather roadway maintenance applications in Texas. The report is presented in two volumes. Volume 1 is a literature review and best practices r...

Planar LTCC transformers for high voltage flyback converters: Part II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George

This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material propertiesmore » and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.« less

Moving NSDC's Staff Development Standards into Practice: Innovation Configurations, Volume II. [CD-ROMs

ERIC Educational Resources Information Center

National Staff Development Council, 2005

2005-01-01

The second volume of "Moving NSDC's Staff Development Standards into Practice: Innovation Configurations" builds on the work that began with the first volume published in 2003. An Innovation Configuration map is a device that identifies and describes the major components of a new practice such as the standards and details of how it would look in…

The Impact of Price Transparency for Surgical Services.

PubMed

Mehta, Ambar; Xu, Tim; Bai, Ge; Hawley, Kristy L; Makary, Martin A

2018-04-01

Increasing insurance deductibles have prompted some medical centers to initiate transparent pricing. However, the impact of price transparency (PT) on surgical volume, revenue, and patient satisfaction is unknown, along with the barriers to achieving PT. We identified ambulatory surgical centers in the Free Market Medical Association database that publicly list prices for surgical services online. Six of eight centers (75%) responded to our data collection inquiry. Among five centers that reported their patient volume and revenue after adopting PT, patient volume increased by a median of 50 per cent (range 10-200%) at one year. Four centers (80%) reported an increase in revenue by a median of 30 per cent (range 4-75%), whereas three centers (60%) experienced an increase in third-party administrator contracts with the average increase being seven new third-party administrator contracts (range = 2-12 contracts). Three centers (50%) reported a reduction in their administrative burden and five centers (83%) reported an increase in patient satisfaction and patient engagement after PT. The leading barrier reported to making prices transparent was discouragement from another practice, hospital, or insurance company. The findings of this preliminary study may help guide medical practices in designing and implementing PT strategies.

Volume Fraction Determination in Cast Superalloys and DS Eutectic Alloys by a New Practice for Manual Point Counting

NASA Technical Reports Server (NTRS)

Andrews, C. W.

1976-01-01

Volume fraction of a constituent or phase was estimated in six specimens of conventional and DS-eutectic superalloys, using ASTM E562-76, a new standard recommended practice for determining volume fraction by systematic manual point count. Volume fractions determined ranged from 0.086 to 0.36, and with one exception, the 95 percent relative confidence limits were approximately 10 percent of the determined volume fractions. Since the confidence-limit goal of 10 percent, which had been arbitrarily chosen previously, was achieved in all but one case, this application of the new practice was considered successful.

Anaesthetic and ICU management of aneurysmal subarachnoid haemorrhage: a survey of European practice.

PubMed

Velly, Lionel J; Bilotta, Federico; Fàbregas, Neus; Soehle, Martin; Bruder, Nicolas J; Nathanson, Michael H

2015-03-01

Many aspects of the perioperative management of aneurysmal subarachnoid haemorrhage (SAH) remain controversial. It would be useful to assess differences in the treatment of SAH in Europe to identify areas for improvement. To determine the clinical practice of physicians treating SAH and to evaluate any discrepancy between practice and published evidence. An electronic survey. Physicians identified through each national society of neuroanaesthesiology and neurocritical care. A 31-item online questionnaire was distributed by the ENIG group. Questions were designed to investigate anaesthetic management of SAH and diagnostic and treatment approaches to cerebral vasospasm. The survey was available from early October to the end of November 2012. Completed surveys were received from 268 respondents, of whom 81% replied that aneurysm treatment was conducted early (within 24 h). Sixty-five percent of centres treated more than 60% of SAH by coiling, 19% had high-volume clipping (>60% of aneurysms clipped) and 16% used both methods equally. No clear threshold for arterial blood pressure target was identified during coiling, temporary clipping or in patients without vasospasm after the aneurysm had been secured. Almost all respondents used nimodipine (97%); 21% also used statins and 20% used magnesium for prevention of vasospasm. A quarter of respondents used intra-arterial vasodilators alone, 5% used cerebral angioplasty alone and 48% used both endovascular methods to treat symptomatic vasospasm. In high-volume clipping treatment centres, 58% of respondents used endovascular methods to manage vasospasm compared with 86% at high-volume coiling treatment centres (P < 0.001). The most commonly used intra-arterial vasodilator was nimodipine (82%), but milrinone was used by 23% and papaverine by 19%. More respondents (44%) selected 'triple-H' therapy over hypertension alone (30%) to treat vasospasm. We found striking variability in the practice patterns of European physicians involved in early treatment of SAH. Significant differences were noted among countries and between high and low-volume coiling centres.

Certification Examination Cases of Candidates for Certification by the American Board of Plastic Surgery: Trends in Practice Profiles Spanning a Decade (2000–2009)

PubMed Central

Chung, Kevin C.; Song, Jae W.; Shauver, Melissa J.; Cullison, Terry M.; Noone, R. Barrett

2011-01-01

Background To evaluate the case mix of plastic surgeons in their early years of practice by examining candidate case-logs submitted for the Oral Examination. Methods De-identified data from 2000–2009 consisting of case-logs submitted by young plastic surgery candidates for the Oral Examination were analyzed. Data consisted of exam year, CPT (Current Procedural Terminology) Codes and the designation of each CPT code as cosmetic or reconstructive by the candidate, and patient age and gender. Subgroup analyses for comprehensive, cosmetic, craniomaxillofacial, and hand surgery modules were performed by using the CPT code list designated by the American Board of Plastic Surgery Maintenance of Certification in Plastic Surgery ( ) module framework. Results We examined case-logs from a yearly average of 261 candidates over 10 years. Wider variations in yearly percent change in median cosmetic surgery case volumes (−62.5% to 30%) were observed when compared to the reconstructive surgery case volumes (−18.0% to 25.7%). Compared to cosmetic surgery cases per candidate, which varied significantly from year-to-year (p<0.0001), reconstructive surgery cases per candidate did not vary significantly (p=0.954). Subgroup analyses of proportions of types of surgical procedures based on CPT code categories, revealed hand surgery to be the least performed procedure relative to comprehensive, craniomaxillofacial, and cosmetic surgery procedures. Conclusions Graduates of plastic surgery training programs are committed to performing a broad spectrum of reconstructive and cosmetic surgical procedures in their first year of practice. However, hand surgery continues to have a small presence in the practice profiles of young plastic surgeons. PMID:21788850

The cost of implementation of the Clinical Laboratory Improvement Amendments of 1988--the example of pediatric office-based cholesterol screening.

PubMed

Tershakovec, A M; Brannon, S D; Bennett, M J; Shannon, B M

1995-08-01

To measure the additional costs of office-based laboratory testing due to the implementation of the Clinical Laboratory Improvement Amendments of 1988 (CLIA '88), using cholesterol screening for children as an example. Four- to ten-year-old children who received their well child care at one of seven participating pediatric practices were screened for hypercholesterolemia. The average number of analyses per day and days per month were derived from the volume of testing completed by the practices. Nurses and technicians time in the screening process were measured and personnel costs were calculated based on salary and fringe benefit rates. Costs of supplies, analyzing control samples, instrument calibration, and instrument depreciation were included. Costs estimates of screening were then completed. CLIA '88 implementation costs were derived from appropriate proficiency testing and laboratory inspection programs. In six practices completing a low volume of testing, 2807 children (5 to 6 children per week) were screened during the observation period, while 414 (about 25 children per week) were screened in one high-volume practice implementing universal screening over a 4-month period. For the six low-volume practices, the cost of screening was $10.60 per child. This decreased to $5.47 for the high-volume practice. Estimated costs of CLIA '88 implementation, including additional proficiency testing and laboratory inspection, added $3.20 per test for the low-volume practices, and $0.71 per test for the high-volume testing. Implementation of CLIA adds significantly to the cost of office-based chemistry laboratory screening. Despite these additional expenses, the cost of testing is still within a reasonable charge for laboratory testing, and is highly sensitive to the volume of tests completed.

Impacts of proposed RCRA regulations and other related federal environmental regulations on fossil fuel-fired facilities: Final report, Volume 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-03-01

Estimation of the costs associated with implementation of the Resource Conservation and Recovery Act (RCRA) regulations for non-hazardous and hazardous material disposal in the utility industry are provided. These costs are based on engineering studies at a number of coal-fired power plants in which the costs for hazardous and non-hazardous disposal are compared to the costs developed for the current practice design for each utility. The relationship of the three costs is displayed. The emphasis of this study is on the determination of incremental costs rather than the absolute costs for each case (current practice, non-hazardous, or hazardous). For themore » purpose of this project, the hazardous design cost was determined for both minimum and maximum compliance.« less

Measurement properties and usability of non-contact scanners for measuring transtibial residual limb volume.

PubMed

Kofman, Rianne; Beekman, Anna M; Emmelot, Cornelis H; Geertzen, Jan H B; Dijkstra, Pieter U

2018-06-01

Non-contact scanners may have potential for measurement of residual limb volume. Different non-contact scanners have been introduced during the last decades. Reliability and usability (practicality and user friendliness) should be assessed before introducing these systems in clinical practice. The aim of this study was to analyze the measurement properties and usability of four non-contact scanners (TT Design, Omega Scanner, BioSculptor Bioscanner, and Rodin4D Scanner). Quasi experimental. Nine (geometric and residual limb) models were measured on two occasions, each consisting of two sessions, thus in total 4 sessions. In each session, four observers used the four systems for volume measurement. Mean for each model, repeatability coefficients for each system, variance components, and their two-way interactions of measurement conditions were calculated. User satisfaction was evaluated with the Post-Study System Usability Questionnaire. Systematic differences between the systems were found in volume measurements. Most of the variances were explained by the model (97%), while error variance was 3%. Measurement system and the interaction between system and model explained 44% of the error variance. Repeatability coefficient of the systems ranged from 0.101 (Omega Scanner) to 0.131 L (Rodin4D). Differences in Post-Study System Usability Questionnaire scores between the systems were small and not significant. The systems were reliable in determining residual limb volume. Measurement systems and the interaction between system and residual limb model explained most of the error variances. The differences in repeatability coefficient and usability between the four CAD/CAM systems were small. Clinical relevance If accurate measurements of residual limb volume are required (in case of research), modern non-contact scanners should be taken in consideration nowadays.

Video game-based exercises for balance rehabilitation: a single-subject design.

PubMed

Betker, Aimee L; Szturm, Tony; Moussavi, Zahra K; Nett, Cristabel

2006-08-01

To investigate whether coupling foot center of pressure (COP)-controlled video games to standing balance exercises will improve dynamic balance control and to determine whether the motivational and challenging aspects of the video games would increase a subject's desire to perform the exercises and complete the rehabilitation process. Case study, pre- and postexercise. University hospital outpatient clinic. A young adult with excised cerebellar tumor, 1 middle-aged adult with single right cerebrovascular accident, and 1 middle-aged adult with traumatic brain injury. A COP-controlled, video game-based exercise system. The following were calculated during 12 different tasks: the number of falls, range of COP excursion, and COP path length. Postexercise, subjects exhibited a lower fall count, decreased COP excursion limits for some tasks, increased practice volume, and increased attention span during training. The COP-controlled video game-based exercise regime motivated subjects to increase their practice volume and attention span during training. This in turn improved subjects' dynamic balance control.

Practical Application Limits of Fuel Cells and Batteries for Zero Emission Vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minnehan, John J.; Pratt, Joseph William

Batteries and hydrogen fuel cells provide zero emission power at the point of use. They are studied as an alternative powerplant for maritime vessels by considering 14 case studies of various ship sizes and routes varying from small passenger vessels to the largest cargo ships. The method used was to compare the mass and volume of the required zero emission solution to the available mass and volume on an existing vessel considering its current engine and fuel storage systems. The results show that it is practically feasible to consider these zero emission technologies for most vessels in the world's fleet.more » Hydrogen fuel cells proved to be the most capable while battery systems showed an advantage for high power, short duration missions. The results provide a guide to ship designers to determine the most suitable types of zero emission powerplants to fit a ship based on its size and energy requirements.« less

Research Informing Practice--Practice Informing Research: Innovative Teaching Methologies for World Language Teachers. Research in Second Language Learning

ERIC Educational Resources Information Center

Schwarzer, David, Ed.; Petron, Mary, Ed.; Luke, Christopher, Ed.

2011-01-01

"Research Informing Practice--Practice Informing Research: Innovative Teaching Methodologies for World Language Educators" is an edited volume that focuses on innovative, nontraditional methods of teaching and learning world languages. Using teacher-research projects, each author in the volume guides readers through their own personal…

Study of the application of hydrogen fuel to long-range subsonic transport aircraft, volume 2

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility, practicability, and potential advantages/disadvantages of using liquid hydrogen as fuel in long range, subsonic transport aircraft of advanced design were studied. Both passenger and cargo-type aircraft were investigated. To provide a valid basis for comparison, conventional hydrocarbon (Jet A) fueled aircraft were designed to perform identical missions using the same advanced technology and meeting the same operational constraints. The liquid hydrogen and Jet A fueled aircraft were compared on the basis of weight, size, energy utilization, cost, noise, emissions, safety, and operational characteristics. A program of technology development was formulated.

Modular reservoir concept for MEMS-based transdermal drug delivery systems

NASA Astrophysics Data System (ADS)

Cantwell, Cara T.; Wei, Pinghung; Ziaie, Babak; Rao, Masaru P.

2014-11-01

While MEMS-based transdermal drug delivery device development efforts have typically focused on tightly-integrated solutions, we propose an alternate conception based upon a novel, modular drug reservoir approach. By decoupling the drug storage functionality from the rest of the delivery system, this approach seeks to minimize cold chain storage volume, enhance compatibility with conventional pharmaceutical practices, and allow independent optimization of reservoir device design, materials, and fabrication. Herein, we report the design, fabrication, and preliminary characterization of modular reservoirs that demonstrate the virtue of this approach within the application context of transdermal insulin administration for diabetes management.

Bubble memory module

NASA Technical Reports Server (NTRS)

Bohning, O. D.; Becker, F. J.

1980-01-01

Design, fabrication and test of partially populated prototype recorder using 100 kilobit serial chips is described. Electrical interface, operating modes, and mechanical design of several module configurations are discussed. Fabrication and test of the module demonstrated the practicality of multiplexing resulting in lower power, weight, and volume. This effort resulted in the completion of a module consisting of a fully engineered printed circuit storage board populated with 5 of 8 possible cells and a wire wrapped electronics board. Interface of the module is 16 bits parallel at a maximum of 1.33 megabits per second data rate on either of two interface buses.

Experiment module concepts study. Volume 3: Module and subsystem design

NASA Technical Reports Server (NTRS)

Hunter, J. R.; Chiarappa, D. J.

1970-01-01

The final common module set exhibiting wide commonality is described. The set consists of three types of modules: one free flying module and two modules that operate attached to the space station. The common module designs provide for the experiment program as defined. The feasibility, economy, and practicality of these modules hinges on factors that do not affect the approach or results of the commonality process, but are important to the validity of the common module concepts. Implementation of the total experiment program requires thirteen common modules: five CM-1, five CM-3, and three CM-4 modules.

Impact of Resource-Based Practice Expenses on the Medicare Physician Volume

PubMed Central

Maxwell, Stephanie; Zuckerman, Stephen

2007-01-01

In 1999, Medicare implemented a resource-based relative value unit (RVU) system for physician practice expense payments, and increased the number of services for which practice expense payments differ by site. Using 1998-2004 data, we examined RVU growth and decomposed that growth into resource-based RVUs, site of service, and service quantity and mix. We found that the number services with site of service differentials doubled, and that shifts in site of service and introduction of resource-based practice expenses (RBPE) were important sources of change in practice expense RVU volume. Service quantity and mix remained the largest source of growth in total RVU volume. PMID:18435224

Surgical residents' perception of competence and relevance of the clinical curriculum to future practice.

PubMed

Fronza, Jeffrey Scott; Prystowsky, Jay P; DaRosa, Debra; Fryer, Jonathan P

2012-01-01

General surgery residents maintain a case log throughout residency in order to achieve a targeted number of designated operations. Program directors must certify that each graduate is competent to enter general surgery practice without direct supervision. Our purpose was twofold, to determine: 1) graduates' perception of competence and relevance of specific operations to their practice; and 2) if case volume is related to competence. Six classes from a general surgery residency program (n=26) were surveyed one year after graduation. The survey was piloted and revised base on findings. It listed 67 operations encompassing all facets of general surgery. Each operation corresponded to two four-point scales (strongly agree to strongly disagree). One scale was headed with "I was well prepared to work-up, independently perform the operation, and effectively care for the patient post-operatively" and the other "This operation is relevant to my current practice profile". A linear regression analysis was utilized to study the relationship between total case volume and overall competence. An unpaired T-test was utilized to study the relationship between volume of specific operations and perceptions of competence. Twenty-two graduates completed the survey (85% response rate). All respondents felt prepared to perform 24% (16/67) of the operations. Fifty percent or more of respondents felt prepared to perform 91% (61/67) of the operations. Fifty percent or more did not feel competent performing the surgical treatment of necrotizing enterocolitis, orchiopexy, transhiatal esophagectomy, adrenalectomy, and open/endovascular abdominal aortic aneurysm repair. Twenty-six operations were felt to be irrelevant to the practice of 50% or more of graduates. No operation was unanimously felt to be relevant. For 12% of operations (8/67) at least 10% of graduates felt the operation was relevant to their practice but were not comfortable performing it. These operations (abdominoperineal resection, transanal excision of tumor, transhiatal esophagectomy, superficial inguinal lymph node dissection, right hepatectomy, whipple, colonoscopy, and adrenalectomy) were considered to be in need of educational improvement at a program level. After analyzing individual case logs, increased case volume only correlated with competence for esophagectomy (5 vs. 1 p = .014), EGD (32 vs. 9 p = .018), orchiopexy (2.5 vs. 0 p = .03), and adrenalectomy (3 vs. 1 p = .001). Total major operations performed did not correlate with overall competence (p = .12). As program directors must document graduates' competency they must do so with confidence. Our results suggest graduates to not feel competent performing many operations, and several are relevant to their practice. Competence in all aspects of general surgery may be unrealistic, even with robust volume. These findings might help in the restructuring curricula of residency. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Review of Adult Learning and Literacy, Volume 5. Connecting Research, Policy, and Practice: A Project of the National Center for the Study of Adult Learning and Literacy

ERIC Educational Resources Information Center

Comings, John, Ed.; Garner, Barbara, Ed.; Smith, Cristine, Ed.

2005-01-01

"The Review of Adult Learning and Literacy: Connecting Research, Policy, and Practice, Volume 5" is a volume in a series of annual publications of the National Center for the Study of Adult Learning and Literacy (NCSALL) that address major issues, the latest research, and the best practices in the field of adult literacy and learning.…

The influences of changing weather patterns and land management on runoff biogeochemistry in a snowmelt dominated agricultural region

NASA Astrophysics Data System (ADS)

Wilson, H. F.; Elliott, J. A.; Glenn, A. J.

2017-12-01

Runoff generation and the associated export of nitrogen, phosphorus, and organic carbon on the Northern Great Plains have historically been dominated by snowmelt runoff. In this region the transport of elements primarily occurs in dissolved rather than particulate forms, so cropland management practices designed to reduce particulate losses tend to be ineffective in reducing nutrient runoff. Over the last decade a higher frequency of high volume and intensity rainfall has been observed, leading to rainfall runoff and downstream flooding. To evaluate interactions between tillage, crop residue management, fertilization practices, weather, and runoff biogeochemistry a network of 18 single field scale watersheds (2-6 ha.) has been established in Manitoba, Canada over a range of fertilization (no input to high input) and tillage (zero tillage to frequent tillage). Soils in this network are typical of cropland in the region with clay or clay loam textures, but soil phosphorus differs greatly depending on input practices (3 to 25 mg kg-1 sodium bicarbonate extractable P). Monitoring of runoff chemistry and hydrology at these sites was initiated in 2013 and over the course of 5 years high volume snowmelt runoff from deep snowpack (125mm snow water equivalent), low volume snowmelt from shallow snowpack (25mm snow water equivalent) and extreme rainfall runoff events in spring have all been observed. Event based analyses of the drivers of runoff chemistry indicate that spring fertilization practices (depth, amount, and timing) influence concentrations of N and P in runoff during large rainfall runoff events, but for snowmelt runoff the near surface soil chemistry, tillage, and crop residue management are of greater importance. Management recommendations that might be suggested to reduce nutrient export and downstream eutrophication in the region differ for snowmelt and rainfall, but are not mutually exclusive.

The effect of physician practice organization on efficient utilization of hospital resources.

PubMed Central

Burns, L R; Chilingerian, J A; Wholey, D R

1994-01-01

OBJECTIVE. This study examines variations in the efficient use of hospital resources across individual physicians. DATA SOURCES AND SETTING. The study is conducted over a two-year period (1989-1990) in all short-term general hospitals with 50 or more beds in Arizona. We examine hospital discharge data for 43,625 women undergoing cesarean sections and vaginal deliveries without complications. These data include physician identifiers that permit us to link patient information with information on physicians provided by the state medical association. STUDY DESIGN. The study first measures the contribution of physician characteristics to the explanatory power of regression models that predict resource use. It then tests hypothesized effects on resource utilization exerted by two sets of physician level factors: physician background and physician practice organization. The latter includes effects of hospital practice volume, concentration of hospital practice, percent managed care patients in one's hospital practice, and diversity of patients treated. Efficiency (inefficiency) is measured as the degree of variation in patient charges and length of stay below (above) the average of treating all patients with the same condition in the same hospital in the same year with the same severity of illness, controlling for discharge status and the presence of complications. PRINCIPAL FINDINGS. After controlling for patient factors, physician characteristics explain a significant amount of the variability in hospital charges and length of stay in the two maternity conditions. Results also support hypotheses that efficiency is influenced by practice organization factors such as patient volume and managed care load. Physicians with larger practices and a higher share of managed care patients appear to be more efficient. CONCLUSIONS. The results suggest that health care reform efforts to develop physician-hospital networks and managed competition may promote greater parsimony in physicians' practice behavior. PMID:8002351

Block Volume Estimation from the Discontinuity Spacing Measurements of Mesozoic Limestone Quarries, Karaburun Peninsula, Turkey

PubMed Central

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J v) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V b), the mean volumetric joint count (J vb) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V in) and volumetric joint count (J vi) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements. PMID:24696642

Block volume estimation from the discontinuity spacing measurements of mesozoic limestone quarries, Karaburun Peninsula, Turkey.

PubMed

Elci, Hakan; Turk, Necdet

2014-01-01

Block volumes are generally estimated by analyzing the discontinuity spacing measurements obtained either from the scan lines placed over the rock exposures or the borehole cores. Discontinuity spacing measurements made at the Mesozoic limestone quarries in Karaburun Peninsula were used to estimate the average block volumes that could be produced from them using the suggested methods in the literature. The Block Quality Designation (BQD) ratio method proposed by the authors has been found to have given in the same order of the rock block volume to the volumetric joint count (J(v)) method. Moreover, dimensions of the 2378 blocks produced between the years of 2009 and 2011 in the working quarries have been recorded. Assuming, that each block surfaces is a discontinuity, the mean block volume (V(b)), the mean volumetric joint count (J(vb)) and the mean block shape factor of the blocks are determined and compared with the estimated mean in situ block volumes (V(in)) and volumetric joint count (J(vi)) values estimated from the in situ discontinuity measurements. The established relations are presented as a chart to be used in practice for estimating the mean volume of blocks that can be obtained from a quarry site by analyzing the rock mass discontinuity spacing measurements.

Development and application of CATIA-GDML geometry builder

NASA Astrophysics Data System (ADS)

Belogurov, S.; Berchun, Yu; Chernogorov, A.; Malzacher, P.; Ovcharenko, E.; Schetinin, V.

2014-06-01

Due to conceptual difference between geometry descriptions in Computer-Aided Design (CAD) systems and particle transport Monte Carlo (MC) codes direct conversion of detector geometry in either direction is not feasible. The paper presents an update on functionality and application practice of the CATIA-GDML geometry builder first introduced at CHEP2010. This set of CATIAv5 tools has been developed for building a MC optimized GEANT4/ROOT compatible geometry based on the existing CAD model. The model can be exported via Geometry Description Markup Language (GDML). The builder allows also import and visualization of GEANT4/ROOT geometries in CATIA. The structure of a GDML file, including replicated volumes, volume assemblies and variables, is mapped into a part specification tree. A dedicated file template, a wide range of primitives, tools for measurement and implicit calculation of parameters, different types of multiple volume instantiation, mirroring, positioning and quality check have been implemented. Several use cases are discussed.

A Review of Online Evidence-based Practice Point-of-Care Information Summary Providers

PubMed Central

Liberati, Alessandro; Moschetti, Ivan; Tagliabue, Ludovica; Moja, Lorenzo

2010-01-01

Background Busy clinicians need easy access to evidence-based information to inform their clinical practice. Publishers and organizations have designed specific tools to meet doctors’ needs at the point of care. Objective The aim of this study was to describe online point-of-care summaries and evaluate their breadth, content development, and editorial policy against their claims of being “evidence-based.” Methods We searched Medline, Google, librarian association websites, and information conference proceedings from January to December 2008. We included English Web-based point-of-care summaries designed to deliver predigested, rapidly accessible, comprehensive, periodically updated, evidence-based information to clinicians. Two investigators independently extracted data on the general characteristics and content presentation of summaries. We assessed and ranked point-of-care products according to: (1) coverage (volume) of medical conditions, (2) editorial quality, and (3) evidence-based methodology. We explored how these factors were associated. Results We retrieved 30 eligible summaries. Of these products, 18 met our inclusion criteria and were qualitatively described, and 16 provided sufficient data for quantitative evaluation. The median volume of medical conditions covered was 80.6% (interquartile range, 68.9% - 84.2%) and varied for the different products. Similarly, differences emerged for editorial policy (median 8.0, interquartile range 5.8 - 10.3) and evidence-based methodology scores (median 10.0, interquartile range 1.0 - 12.8) on a 15-point scale. None of these dimensions turned out to be significantly associated with the other dimensions (editorial quality and volume, Spearman rank correlation r = -0.001, P = .99; evidence-based methodology and volume, r = -0.19, P = .48; editorial and evidence-based methodology, r = 0.43, P =.09). Conclusions Publishers are moving to develop point-of-care summary products. Some of these have better profiles than others, and there is room for improved reporting of the strengths and weaknesses of these products. PMID:20610379

Big Data in Designing Clinical Trials: Opportunities and Challenges

PubMed Central

Mayo, Charles S.; Matuszak, Martha M.; Schipper, Matthew J.; Jolly, Shruti; Hayman, James A.; Ten Haken, Randall K.

2017-01-01

Emergence of big data analytics resource systems (BDARSs) as a part of routine practice in Radiation Oncology is on the horizon. Gradually, individual researchers, vendors, and professional societies are leading initiatives to create and demonstrate use of automated systems. What are the implications for design of clinical trials, as these systems emerge? Gold standard, randomized controlled trials (RCTs) have high internal validity for the patients and settings fitting constraints of the trial, but also have limitations including: reproducibility, generalizability to routine practice, infrequent external validation, selection bias, characterization of confounding factors, ethics, and use for rare events. BDARS present opportunities to augment and extend RCTs. Preliminary modeling using single- and muti-institutional BDARS may lead to better design and less cost. Standardizations in data elements, clinical processes, and nomenclatures used to decrease variability and increase veracity needed for automation and multi-institutional data pooling in BDARS also support ability to add clinical validation phases to clinical trial design and increase participation. However, volume and variety in BDARS present other technical, policy, and conceptual challenges including applicable statistical concepts, cloud-based technologies. In this summary, we will examine both the opportunities and the challenges for use of big data in design of clinical trials. PMID:28913177

Big Data in Designing Clinical Trials: Opportunities and Challenges.

PubMed

Mayo, Charles S; Matuszak, Martha M; Schipper, Matthew J; Jolly, Shruti; Hayman, James A; Ten Haken, Randall K

2017-01-01

Emergence of big data analytics resource systems (BDARSs) as a part of routine practice in Radiation Oncology is on the horizon. Gradually, individual researchers, vendors, and professional societies are leading initiatives to create and demonstrate use of automated systems. What are the implications for design of clinical trials, as these systems emerge? Gold standard, randomized controlled trials (RCTs) have high internal validity for the patients and settings fitting constraints of the trial, but also have limitations including: reproducibility, generalizability to routine practice, infrequent external validation, selection bias, characterization of confounding factors, ethics, and use for rare events. BDARS present opportunities to augment and extend RCTs. Preliminary modeling using single- and muti-institutional BDARS may lead to better design and less cost. Standardizations in data elements, clinical processes, and nomenclatures used to decrease variability and increase veracity needed for automation and multi-institutional data pooling in BDARS also support ability to add clinical validation phases to clinical trial design and increase participation. However, volume and variety in BDARS present other technical, policy, and conceptual challenges including applicable statistical concepts, cloud-based technologies. In this summary, we will examine both the opportunities and the challenges for use of big data in design of clinical trials.

Reliability, Availability and Maintainability Design Practices Guide. Volume 1,

DTIC Science & Technology

1981-03-01

Experience 7-3-3 Air Force RIV - Avionics 7-3-4 RIW-S Army 7-3-5a The Application of Availability to Linear 7-3-6 Indifference Contracting Improvement...acceptance of the maintain- ability of Air Force ground electronic systems and equipments. Although the notebook is directed at ground electronic systems...conformal coating standardization, a lack of written instructions, and no standardization between fleet activities. The Naval Air Development Center

The Social Sciences: A Cross-Disciplinary Guide to Selected Sources. Third Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Herron, Nancy L., Ed.

Like the two editions that precede it, this volume is designed as a working text to serve two groups of users. It is both an up-to-date guide to the literature prepared by practicing librarians for fast and easy access to some of the best resources in the social science literature, and it is a teaching textbook for students wanting a clear,…

Naval Postgraduate School Research. Volume 8, Number 3, October 1998

DTIC Science & Technology

1998-10-01

the Bangor Submarine Base: “Understanding Racism ” and “Under- standing Sexism .” These two-day workshops are part of a four workshop series on Managing...organization theory and complex- ity theory and shaping them into design guidelines for mapping command and control processes to the needs of specific missions...Intranet- based decision support for the ACE. The methodol- ogy combines systems development life cycle (SDLC) practices, command and control theory , an

Review of musculoskeletal injuries and prevention in the endoscopy practitioner.

PubMed

Harvin, Glenn

2014-08-01

Practitioners of endoscopy often experience musculoskeletal pain and injury (most often in the back, neck, shoulders, hands, wrists, and thumbs) that are associated with the minute and repetitive strain that is placed on these areas during endoscopic procedures. This review of the current documentation of endoscopy-related pain and injuries among practitioners finds that such problems are widespread and specific in kind as well as strongly correlated with high procedure volume and procedure duration. Research on the nature and impact of cumulative trauma and overuse syndromes in other professions such as dentistry, pianists, production labor, and athletics is brought to bear on the work of the endoscopist. A more thorough understanding of the nature and prevalence of work-related pain and injury sustained by endoscopists should inform further development of ergonomic practices and equipment design. This article reviews current recommendations for ergonomic design in the endoscopy procedure space and finds that reported compliance with those recommendations is quite low. Strategies for the management of the risk of musculoskeletal injuries related to the practice of endoscopy include compliance with currently recommended ergonomic practices, education of trainees in ergonomic technique when practicing endoscopy, and research toward the modification and development of more ergonomic endoscopes and procedure spaces.

The ART of Social Networking: How SART member clinics are connecting with patients online

PubMed Central

OMURTAG, Kenan; JIMENEZ, Patricia T.; RATTS, Valerie; ODEM, Randall; COOPER, Amber R.

2013-01-01

Objective To study and describe the use of social networking websites among SART member clinics Design Cross-sectional study Setting University Based Practice Patients Not Applicable Interventions Not Applicable Main Outcome Measure Prevalence of social networking websites among SART member clinics and evaluation of content, volume and location (i.e mandated state, region) using multivariate regression analysis Results 384 SART registered clinics and 1,382 social networking posts were evaluated. Of the clinics, 96% have a website and 30% link to a social networking website. The majority of clinics (89%) with social networking websites were affiliated with non-academic centers. Social networking posts mostly provide information (31%) and/or advertise (28%), while the remaining offer support (19%) or are irrelevant (17%) to the target audience. Only 5% of posts involved patients requesting information. Clinic volume correlates with the presence of a clinic website and a social networking website (p<0.001). Conclusion Almost all SART member clinics have a website. Nearly one-third of these clinics host a social networking website like Facebook, Twitter and/or a Web-log (“blog”). Larger volume clinics commonly host social networking websites. These sites provide new ways to communicate with patients, but clinics should maintain policies on the incorporation of social networks into practice. PMID:22088209

Four-dimensional multislice computed tomography for determination of respiratory lung tumor motion in conformal radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leter, Edward M.; Cademartiri, Filippo; Levendag, Peter C.

2005-07-01

Purpose: We used four-dimensional multislice spiral computed tomography (MSCT) to determine respiratory lung-tumor motion and compared this strategy to common clinical practice in conformal radiotherapy treatment-planning imaging. Methods and Materials: The entire lung volume of 10 consecutive patients with 14 lung metastases were scanned by a 16-slice MSCT. During the scans, patients were instructed to breathe through a spirometer that was connected to a laptop computer. For each patient, 10 stacks of 1.5-mm slices, equally distributed throughout the respiratory cycle, were reconstructed from the acquired MSCT data. The lung tumors were manually contoured in each data set. For each patient,more » the tumor-volume contours of all data sets were copied to 1 data set, which allowed determination of the volume that encompassed all 10 lung-tumor positions (i.e., the tumor-traversed volume [TTV]) during the respiratory cycle. The TTV was compared with the 10 tumor volumes contoured for each patient, to which an empiric respiratory-motion margin was added. The latter target volumes were designated internal-motion included tumor volume (IMITV). Results: The TTV measurements were significantly smaller than the reference IMITV measurements (5.2 {+-} 10.2 cm{sup 3} and 10.1 {+-} 13.7 cm{sup 3}, respectively). All 10 IMITVs for 2 of the 4 tumors in 1 subject completely encompassed the TTV. All 10 IMITVs for 3 tumors in 2 patients did not show overlap with up to 35% of the corresponding TTV. The 10 IMITVs for the remaining tumors either completely encompassed the corresponding TTV or did not show overlap with up to 26% of the corresponding TTV. Conclusions: We found that individualized determination of respiratory lung-tumor motion by four-dimensional respiratory-gated MSCT represents a better and simple strategy to incorporate periodic physiologic motion compared with a generalized approach. The former strategy can, therefore, improve common and state-of-the-art clinical practice in conformal radiotherapy.« less

30 CFR 250.456 - What safe practices must the drilling fluid program follow?

Code of Federal Regulations, 2012 CFR

2012-07-01

... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

30 CFR 250.456 - What safe practices must the drilling fluid program follow?

Code of Federal Regulations, 2014 CFR

2014-07-01

... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

30 CFR 250.456 - What safe practices must the drilling fluid program follow?

Code of Federal Regulations, 2013 CFR

2013-07-01

... circulate a volume of drilling fluid equal to the annular volume with the drill pipe just off-bottom. You... volume needed to fill the hole. Both sets of numbers must be posted near the driller's station. You must... industry-accepted practices and include density, viscosity, and gel strength; hydrogenion concentration...

Structural design of high-performance capacitive accelerometers using parametric optimization with uncertainties

NASA Astrophysics Data System (ADS)

Teves, André da Costa; Lima, Cícero Ribeiro de; Passaro, Angelo; Silva, Emílio Carlos Nelli

2017-03-01

Electrostatic or capacitive accelerometers are among the highest volume microelectromechanical systems (MEMS) products nowadays. The design of such devices is a complex task, since they depend on many performance requirements, which are often conflicting. Therefore, optimization techniques are often used in the design stage of these MEMS devices. Because of problems with reliability, the technology of MEMS is not yet well established. Thus, in this work, size optimization is combined with the reliability-based design optimization (RBDO) method to improve the performance of accelerometers. To account for uncertainties in the dimensions and material properties of these devices, the first order reliability method is applied to calculate the probabilities involved in the RBDO formulation. Practical examples of bulk-type capacitive accelerometer designs are presented and discussed to evaluate the potential of the implemented RBDO solver.

An investigation of the self-heating phenomenon in viscoelastic materials subjected to cyclic loadings accounting for prestress

NASA Astrophysics Data System (ADS)

de Lima, A. M. G.; Rade, D. A.; Lacerda, H. B.; Araújo, C. A.

2015-06-01

It has been demonstrated by many authors that the internal damping mechanism of the viscoelastic materials offers many possibilities for practical engineering applications. However, in traditional procedures of analysis and design of viscoelastic dampers subjected to cyclic loadings, uniform, constant temperature is generally assumed and do not take into account the self-heating phenomenon. Moreover, for viscoelastic materials subjected to dynamic loadings superimposed on static preloads, such as engine mounts, these procedures can lead to poor designs or even severe failures since the energy dissipated within the volume of the material leads to temperature rises. In this paper, a hybrid numerical-experimental investigation of effects of the static preloads on the self-heating phenomenon in viscoelastic dampers subjected to harmonic loadings is reported. After presenting the theoretical foundations, the numerical and experimental results obtained in terms of the temperature evolutions at different points within the volume of the viscoelastic material for various static preloads are compared, and the main features of the methodology are discussed.

Space shuttle main engine definition (phase B). Volume 5: Valves and interconnects. [for space shuttle

NASA Technical Reports Server (NTRS)

Schultz, D. F.

1971-01-01

The steady state thermodynamic cycle balance of the single preburner staged combustion engine, coupled with dynamic transient analyses, dictated in detail the location and requirements for each valve defined in this volume. Valve configuration selections were influenced by overall engine and vehicle system weight and failure mode determinations. Modulating valve actuators are external to the valve and are line replaceable. Development and satisfactory demonstration of a high pressure dynamic shaft seal has made this configuration practical. Pneumatic motor driven actuators that use engine pumped hydrogen gas as the working fluid are used. The helium control system is proposed as a module containing a cluster of solenoid actuated valves. The separable couplings and flanges are designed to assure minimum leakage with minimum coupling weight. The deflection of the seal surface in the flange is defined by finite element analysis that has been confirmed with test data. The seal design proposed has passed preliminary pressure cycling and thermal cycling tests.

Design and manufacture of solid ZrO2 electrolyte

NASA Technical Reports Server (NTRS)

1988-01-01

The following project assignment was given to the students: 'design and build a suitable YSZ solid electrolyte cell. Describe advantages of the design and fabrication method. Finally, to the limits of available resources, fabricate the design. Explain why it would be superior to other designs.' Clemson University students definitely benefitted from this experience with USRA/NASA. The challenge that this project gave the students was both exciting and attention-getting. Students spent far more time per credit hour on this project than on their other course. This project advanced the art of making efficient oxygen generators as well. Clemson students are now well on the way to designing a solid electrolyte with a large active surface area and comparatively small volume. Previous devices have had to endure the limitation of using only simple shapes such as tubes. The results of this project have demonstrated that better configurations are not only possible but practical.

Gray matter volume is associated with rate of subsequent skill learning after a long term training intervention

PubMed Central

Sampaio-Baptista, Cassandra; Scholz, Jan; Jenkinson, Mark; Thomas, Adam G.; Filippini, Nicola; Smit, Gabrielle; Douaud, Gwenaëlle; Johansen-Berg, Heidi

2014-01-01

The ability to predict learning performance from brain imaging data has implications for selecting individuals for training or rehabilitation interventions. Here, we used structural MRI to test whether baseline variations in gray matter (GM) volume correlated with subsequent performance after a long-term training of a complex whole-body task. 44 naïve participants were scanned before undertaking daily juggling practice for 6 weeks, following either a high intensity or a low intensity training regime. To assess performance across the training period participants' practice sessions were filmed. Greater GM volume in medial occipito-parietal areas at baseline correlated with steeper learning slopes. We also tested whether practice time or performance outcomes modulated the degree of structural brain change detected between the baseline scan and additional scans performed immediately after training and following a further 4 weeks without training. Participants with better performance had higher increases in GM volume during the period following training (i.e., between scans 2 and 3) in dorsal parietal cortex and M1. When contrasting brain changes between the practice intensity groups, we did not find any straightforward effects of practice time though practice modulated the relationship between performance and GM volume change in dorsolateral prefrontal cortex. These results suggest that practice time and performance modulate the degree of structural brain change evoked by long-term training regimes. PMID:24680712

High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, M.; Gilbride, T.; Ruiz, K.

This document is the sixth volume of the Building America Best Practices Series. It presents information that is useful throughout the United States for enhancing the energy efficiency practices in the specific climate zones that are presented in the first five Best Practices volumes. It provides an introduction to current photovoltaic and solar thermal building practices. Information about window selection and shading is included.

30 CFR 250.456 - What safe practices must the drilling fluid program follow?

Code of Federal Regulations, 2011 CFR

2011-07-01

... fluid. You must circulate a volume of drilling fluid equal to the annular volume with the drill pipe... fluid volume needed to fill the hole. Both sets of numbers must be posted near the driller's station... warrant. Your tests must conform to industry-accepted practices and include density, viscosity, and gel...

Study on utilization of advanced composites in commercial aircraft wing structures. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Sakata, I. F.; Ostrom, R. B.; Cardinale, S. V.

1978-01-01

The effort required by commercial transport manufacturers to accomplish the transition from current construction materials and practices to extensive use of composites in aircraft wings was investigated. The engineering and manufacturing disciplines which normally participate in the design, development, and production of an aircraft were employed to ensure that all of the factors that would enter a decision to commit to production of a composite wing structure were addressed. A conceptual design of an advanced technology reduced energy aircraft provided the framework for identifying and investigating unique design aspects. A plan development effort defined the essential technology needs and formulated approaches for effecting the required wing development. The wing development program plans, resource needs, and recommendations are summarized.

Central receiver solar thermal power system, Phase 1. CDRL item 2. Pilot plant preliminary design report. Volume VI. Electrical power generation and master control subsystems and balance of plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hallet, Jr., R. W.; Gervais, R. L.

1977-10-01

The requirements, performance, and subsystem configuration for both the Commercial and Pilot Plant electrical power generation subsystems (EPGS) and balance of plants are presented. The EPGS for both the Commercial Plant and Pilot Plant make use of conventional, proven equipment consistent with good power plant design practices in order to minimize risk and maximize reliability. The basic EPGS cycle selected is a regenerative cycle that uses a single automatic admission, condensing, tandem-compound double-flow turbine. Specifications, performance data, drawings, and schematics are included. (WHK)

Book Review

NASA Astrophysics Data System (ADS)

Clevers, J. G. P. W.

2015-02-01

About thirty years after the previous advanced textbook on Microwave Remote Sensing by Ulaby, Moore and Fung has been published as three separate volumes, now an up-to-date new textbook has been published. The 1000-page book covers theoretical models, system design and operation, and geoscientific applications of active and passive microwave remote sensing systems. It is designed as a textbook at the postgraduate level, as well as a reference for the practicing professional. The book is caught by a thorough introduction into the physics and mathematics of electrical engineering applied to microwave radiation. Here on overview of its chapters with a short description of its focus will be given.

Civil Engineering Corrosion Control. Volume 3. Cathodic Protection Design

DTIC Science & Technology

1975-02-01

coatings, test stations bonds, and insulation. It is certainly not a "cure-all Its economics and feasibility mus’ always be carefully studied .. An in...General Description of Cathodic Protection. Cath- odic protection, as the name signifies, is the process by which an entire surface is transformed into a...The National Asaoeiation of Corrosion Enguler "I i ,.I-11 Standard RP-Ol-69, "Recommended Practice Por ront.ol ol." Ex - ternal Corrosion on

Toddlers in Early Head Start: A Portrait of 2-Year-Olds, Their Families, and the Programs Serving Them. Volume 1: Age 2 Report. OPRE Report 2015-10

ERIC Educational Resources Information Center

Vogel, Cheri A.; Caronongan, Pia; Thomas, Jaime; Bandel, Eileen; Xue, Yange; Henke, Juliette; Aikens, Nikki; Boller, Kimberly; Murphy, Lauren

2015-01-01

The Early Head Start Family and Child Experiences Survey (Baby FACES) is a descriptive study of Early Head Start programs designed to inform policy and practice at both national and local levels. Baby FACES follows two cohorts of children through their time in Early Head Start, starting in 2009, the first wave of data collection. The Newborn…

Survey of nutritional practices during therapeutic hypothermia for hypoxic-ischaemic encephalopathy

PubMed Central

Hazeldine, Beth; Thyagarajan, Balamurugan; Grant, Michellee; Chakkarapani, Elavazhagan

2017-01-01

Objective To evaluate current nutritional practices during and after therapeutic hypothermia (TH) for infants with hypoxic-ischaemic encephalopathy (HIE) in UK neonatal units. Study design Email survey of neonatal clinicians. Setting UK neonatal units providing active TH. Patients Neonates cooled for HIE. Methods Email survey including questions regarding the timing of starting enteral feeds, volumes, frequency and parenteral nutrition (PN) use and availability of guidelines. Results Forty-nine responses were received (49/69, 71%). The rate of enteral feeding during TH and rewarming was 59% (29/49). There was a significant linear trend for the increase in the proportion of units starting enteral feeds (p=0.001) during TH. As compared with post-TH period, significantly lower milk volumes were started during TH (median (range): 7.5 mL/kg/day (1.5–24) vs 17.5 mL/kg/day (7.5–30), p=0.0004). During TH, breast milk was primarily used by 52% of units predominantly as 2–3 hourly feeds, and volumes were increased as tolerated in 55% of units. Only 29% (14/49) of units used PN, with 86% (12/14) of those offering enteral feeds during PN. Guidelines for feeding during TH were available in 31% (15/49) of units. Conclusions Many neonatal clinicians offer enteral feeds predominantly using expressed breast milk, with or without PN, during TH, although with huge variability. The heterogeneity in the nutritional practice underscores the need for assessing the safety of both enteral and parenteral feeding during TH. PMID:29637095

Characterization of Greater-Than-Class C sealed sources. Volume 3, Sealed sources held by general licensees

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, G.

1994-09-01

This is the third volume in a series of three volumes characterizing the population of sealed sources that may become greater-than-Class C low-level radioactive waste (GTCC LLW). In this volume, those sources possessed by general licensees are discussed. General-licensed devices may contain sealed sources with significant amounts of radioactive material. However, the devices are designed to be safe to use without special knowledge of radiological safety practices. Devices containing Am-241 or Cm-244 sources are most likely to become GTCC LLW after concentration averaging. This study estimates that there are about 16,000 GTCC devices held by general licensees; 15,000 of thesemore » contain Am-241 sources and 1,000 contain Cm-244 sources. Additionally, this study estimates that there are 1,600 GTCC devices sold to general licensees each year. However, due to a lack of available information on general licensees in Agreement States, these estimates are uncertain. This uncertainty is quantified in the low and high case estimates given in this report, which span approximately an order of magnitude.« less

The effects of low fat chocolate milk on postexercise recovery in collegiate athletes.

PubMed

Spaccarotella, Kim J; Andzel, Walter D

2011-12-01

Spaccarotella, KJ and Andzel, WD. The effects of low fat chocolate milk on postexercise recovery in collegiate athletes. J Strength Cond Res 25(12): 3456-3460, 2011-Drinking chocolate milk between exercise sessions may improve recovery. The purpose of this study was to examine the effects of low fat chocolate milk vs. a carbohydrate-electrolyte beverage (CE) on recovery between preseason practice sessions among 5 male and 8 female Division III soccer players. The study used a randomized crossover design: between morning and afternoon practices, athletes received either an amount of chocolate milk that provided 1 g carbohydrate per kilogram body weight or an equal volume of CE (mean volume of 615 ± 101 ml). After their afternoon practice, they completed a shuttle run to fatigue. Data were analyzed using the Wilcoxon paired rank-sign test (for shuttle run time) and the paired samples t-test (for dietary intake). No significant differences in run time were reported for the group. For the men only, there was a trend of increased time to fatigue with chocolate milk compared with the CE (exact p = 0.03). Low fat chocolate milk may therefore be as good as a CE at promoting recovery between training sessions during preseason.

Rural Schools Prototype Analysis. Volume II: Methodology. An Example Process of Identifying Determinants, Selecting Options, & Developing Schematic Designs.

ERIC Educational Resources Information Center

Construction Systems Management, Inc., Anchorage, AK.

Volume II of a 3-volume report demonstrates the use of Design Determinants and Options (presented in Volume I) in the planning and design of small rural Alaskan secondary schools. Section I, a checklist for gathering site-specific information to be used as a data base for facility design, is organized in the same format as Volume I, which can be…

MOD-5A wind turbine generator program design report: Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work performed between July 1980 and June 1984 is discussed. The report is divided into four volumes: Volume 1 summarizes the entire MOD-5A program, Volume 2 discusses the conceptual and preliminary design phases, Volume 3 describes the final design of the MOD-5A, and Volume 4 contains the drawings and specifications developed for the final design. Volume 1, the Executive Summary, summarizes all phases of the MOD-5A program. The performance and cost of energy generated by the MOD-5A are presented. Each subsystem - the rotor, drivetrain, nacelle, tower and foundation, power generation, and control and instrumentation subsystems - is described briefly. The early phases of the MOD-5A program, during which the design was analyzed and optimized, and new technologies and materials were developed, are discussed. Manufacturing, quality assurance, and safety plans are presented. The volume concludes with an index of volumes 2 and 3.

Critical reading and critical thinking--study design and methodology: a personal approach on how to read the clinical literature.

PubMed

Lipman, Timothy O

2013-04-01

The volume of medical literature grows exponentially. Yet we are faced with the necessity to make clinical decisions based on the availability and quality of scientific information. The general strength (reliability, robustness) of any interpretation that guides us in clinical decision making is dependent on how information was obtained. All information and medical studies and, consequently, all conclusions are not created equal. It is incumbent upon us to be able to assess the quality of the information that guides us in the care of our patients. Being able to assess medical literature critically requires use of critical reading and critical thinking skills. To achieve these skills, to be able to analyze medical literature critically, takes a combination of education and practice, practice, and more practice.

Insulation Technology in Dry Air and Vacuum for a 72kV Low Pressured Dry Air Insulated Switchgear

NASA Astrophysics Data System (ADS)

Yoshida, Tadahiro; Koga, Hiromi; Harada, Takakazu; Miki, Shinichi; Arioka, Masahiro; Sato, Shinji; Yoshida, Satoru; Inoue, Naoaki; Maruyama, Akihiko; Takeuchi, Toshie

A new 72kV rated low pressured dry air insulated switchgear applying electromagnetic actuation and function that supports CBM has been developed. First, dielectric characteristics in dry air under lightning impulse application has been investigated at bare and insulator covered electrodes. Dependence of the breakdown electric field strength on the effective area has been clarified to apply the configuration design of the insulation mold for the vacuum interrupter. In addition, moisture volume dependence on surface resistance has been clarified to decide moisture volume in gas pressure tank. Next, a new vacuum circuit breaker (VCB) has been designed. To keep dimensions from former 72kV SF6 gas insulated switchgear, distance between contacts in vacuum interrupter is needed to be shorter than that of former switchgear. Voltage withstand capability between electrodes practically designed for vacuum interrupter has been investigated under dc voltage application simulated the small capacitive current breaking test. Gap configuration including contacts and slits has been optimized and distance has been shortened 11% from former switchgear. As a result, the new low pressured dry air insulated switchgear has been designed comparably in outer size to former SF6 gas insulated switchgear. Using dry air as an insulation medium with low pressure has been able to reduce the environmental burden.

Design Criteria for Microbiological Facilities at Fort Detrick. Volume II: Design Criteria

ERIC Educational Resources Information Center

Army Biological Labs., Fort Detrick, MD. Industrial Health and Safety Div.

Volume II of a two-volume manual of design criteria, based primarily on biological safety considerations. It is prepared for the use of architect-engineers in designing new or modified microbiological facilities for Fort Detrick, Maryland. Volume II is divided into the following sections: (1) architectural, (2) heating, ventilating, and air…

Planning for the Rheumatologist Workforce: Factors Associated With Work Hours and Volumes.

PubMed

Barber, Claire E H; Nasr, Mina; Barnabe, Cheryl; Badley, Elizabeth M; Lacaille, Diane; Pope, Janet; Cividino, Alfred; Yacyshyn, Elaine; Baillie, Cory; Mosher, Dianne; Thomson, John G; Charnock, Christine; Thorne, J Carter; Zummer, Michel; Brophy, Julie; Ruban, Thanu Nadarajah; Ahluwalia, Vandana; McDougall, Robert; Marshall, Deborah A

2018-05-25

The aim of this study was to evaluate factors associated with rheumatologists' clinical work hours and patient volumes based on a national workforce survey in rheumatology. Adult rheumatologists who participated in a 2015 workforce survey were included (n = 255). Univariate analysis evaluated the relationship between demographics (sex, age, academic vs. community practice, billing fee for service vs. other plan, years in practice, retirement plans) and workload (total hours and number of ½-day clinics per week) or patient volumes (number of new and follow-up consults per week). Multiple linear regression models were used to evaluate the relationship between practice type, sex, age, and working hours or clinical volumes. Male rheumatologists had more ½-day clinics (P = 0.05) and saw more new patients per week (P = 0.001) compared with females. Community rheumatologists had more ½-day clinics and new and follow-up visits per week (all P < 0.01). Fee-for-service rheumatologists reported more ½-day clinics per week (P < 0.001) and follow-ups (P = 0.04). Workload did not vary by age, years in practice, or retirement plans. In multivariate analysis, community practice remained independently associated with higher patient volumes and more clinics per week. Female rheumatologists reported fewer clinics and fewer follow-up patients per week than males, but this did not affect the duration of working hours or new consultations. Age was not associated with work volumes or hours. Practice type and rheumatologist sex should be considered when evaluating rheumatologist workforce needs, as the proportion of female rheumatologists has increased over time and alternative billing practices have been introduced in many centers.

Design Science Methodology Applied to a Chemical Surveillance Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Zhuanyi; Han, Kyungsik; Charles-Smith, Lauren E.

Public health surveillance systems gain significant benefits from integrating existing early incident detection systems,supported by closed data sources, with open source data.However, identifying potential alerting incidents relies on finding accurate, reliable sources and presenting the high volume of data in a way that increases analysts work efficiency; a challenge for any system that leverages open source data. In this paper, we present the design concept and the applied design science research methodology of ChemVeillance, a chemical analyst surveillance system.Our work portrays a system design and approach that translates theoretical methodology into practice creating a powerful surveillance system built for specificmore » use cases.Researchers, designers, developers, and related professionals in the health surveillance community can build upon the principles and methodology described here to enhance and broaden current surveillance systems leading to improved situational awareness based on a robust integrated early warning system.« less

Building an experimental model of the human body with non-physiological parameters.

PubMed

Labuz, Joseph M; Moraes, Christopher; Mertz, David R; Leung, Brendan M; Takayama, Shuichi

2017-03-01

New advances in engineering and biomedical technology have enabled recent efforts to capture essential aspects of human physiology in microscale, in-vitro systems. The application of these advances to experimentally model complex processes in an integrated platform - commonly called a 'human-on-a-chip (HOC)' - requires that relevant compartments and parameters be sized correctly relative to each other and to the system as a whole. Empirical observation, theoretical treatments of resource distribution systems and natural experiments can all be used to inform rational design of such a system, but technical and fundamental challenges (e.g. small system blood volumes and context-dependent cell metabolism, respectively) pose substantial, unaddressed obstacles. Here, we put forth two fundamental principles for HOC design: inducing in-vivo -like cellular metabolic rates is necessary and may be accomplished in-vitro by limiting O 2 availability and that the effects of increased blood volumes on drug concentration can be mitigated through pharmacokinetics-based treatments of solute distribution. Combining these principles with natural observation and engineering workarounds, we derive a complete set of design criteria for a practically realizable, physiologically faithful, five-organ millionth-scale (× 10 -6 ) microfluidic model of the human body.

Building an experimental model of the human body with non-physiological parameters

PubMed Central

Labuz, Joseph M.; Moraes, Christopher; Mertz, David R.; Leung, Brendan M.; Takayama, Shuichi

2017-01-01

New advances in engineering and biomedical technology have enabled recent efforts to capture essential aspects of human physiology in microscale, in-vitro systems. The application of these advances to experimentally model complex processes in an integrated platform — commonly called a ‘human-on-a-chip (HOC)’ — requires that relevant compartments and parameters be sized correctly relative to each other and to the system as a whole. Empirical observation, theoretical treatments of resource distribution systems and natural experiments can all be used to inform rational design of such a system, but technical and fundamental challenges (e.g. small system blood volumes and context-dependent cell metabolism, respectively) pose substantial, unaddressed obstacles. Here, we put forth two fundamental principles for HOC design: inducing in-vivo-like cellular metabolic rates is necessary and may be accomplished in-vitro by limiting O2 availability and that the effects of increased blood volumes on drug concentration can be mitigated through pharmacokinetics-based treatments of solute distribution. Combining these principles with natural observation and engineering workarounds, we derive a complete set of design criteria for a practically realizable, physiologically faithful, five-organ millionth-scale (× 10−6) microfluidic model of the human body. PMID:28713851

Diversifying biological fuel cell designs by use of nanoporous filters.

PubMed

Biffinger, Justin C; Ray, Ricky; Little, Brenda; Ringeisen, Bradley R

2007-02-15

The use of proton exchange membranes (PEMs) in biological fuel cells limits the diversity of novel designs for increasing output power or enabling autonomous function in unique environments. Here we show that selected nanoporous polymer filters (nylon, cellulose, or polycarbonate) can be used effectively in place of PEMs in a miniature microbial fuel cell (mini-MFC, device cross-section 2 cm2), generating a power density of 16 W/m3 with an uncoated graphite felt oxygen reduction reaction (ORR) cathode. The incorporation of polycarbonate or nylon membranes into biological fuel cell designs produced comparable power and durability to Nafion-117 membranes. Also, high power densities for novel larger (5 cm3 anode volume, 0.6 W/m3) and smaller (0.025 cm3 projected geometric volume, average power density 10 W/m3) chamberless and pumpless microbial fuel cells were observed. As an additional benefit, the nanoporous membranes isolated the anode from invading natural bacteria, increasing the potential applications for MFCs beyond aquatic sediment environments. This work is a practical solution for decreasing the cost of biological fuel cells while incorporating new features for powering long-term autonomous devices.

Practice patterns for the radical treatment of nasopharyngeal cancer by head and neck oncologists in the United Kingdom.

PubMed

Petkar, Imran; Bhide, Shreerang; Newbold, Kate; Harrington, Kevin; Nutting, Chris

2018-05-01

Advances in radiation delivery, imaging techniques, and chemotherapy have significantly improved treatment options for non-metastatic nasopharyngeal cancers (NPC). However, their impact on the practice in the United Kingdom (UK), where this tumour is rare, is unknown. This study examined the current attitudes of UK head and neck oncologists to the treatment of NPC. UK head and neck oncologists representing 19/23 cancer networks were sent an invitation email with a personalised link to a web-based survey designed to identify the influence of tumour and nodal staging on current NPC management practices. 26/42 (61%) of clinicians responded. Induction chemotherapy followed by concomitant chemoradiation was the treatment of choice for Stage III (69%) and IVa/b (96%), with cisplatin and 5-fluorouracil combination being the most commonly used induction chemotherapy regimen (88%). 16 centres (61%) used a geometric approach, adding variable margins of 0-10 mm to the gross tumour volume to define their therapeutic dose clinical target volume. 54% of respondents used 3 radiotherapy (RT) prescription doses to treat NPC. Retropharyngeal nodal region irradiation policy was inconsistent, with nearly one-quarter treating the entire group to a radical dose. Significant heterogeneity currently exists in the RT practice of NPC in the UK. A consensus regarding the optimal curative, function-sparing treatment paradigm for NPC is necessary to ensure cancer survivors have satisfactory long-term health-related quality of life. Advances in knowledge: This is the first study to highlight the significant variation in RT practice of NPC in the UK.

Correction of Age-Related Midface Volume Loss With Low-Volume Hyaluronic Acid Filler.

PubMed

Wilson, Monique Vanaman; Fabi, Sabrina Guillen; Greene, Ryan

2017-03-01

The pivotal approval trial for a smooth, highly cohesive, viscous, 20-mg/mL hyaluronic acid filler demonstrated sustained aesthetic improvement, with a mean injection volume of 6.65 mL. In daily practice, however, it is not often practical or necessary to use large injection volumes to achieve the desired cosmetic outcome. To assess the efficacy, longevity, and patient satisfaction associated with correction of age-related midface volume loss using the low volumes of hyaluronic acid filler more commonly used in day-to-day practice. A 2-center, retrospective cohort study examined medical records of 61 healthy patients who underwent treatment for facial volume loss with hyaluronic acid filler from November 1, 2013, through April 31, 2014. Follow-up visits were conducted at 1, 3, 6, and 12 months after the procedure. Data were pooled from a private facial plastic surgery practice in Weston, Florida, and a private cosmetic dermatology practice in San Diego, California. Patients were treated with hyaluronic acid filler according to the investigator's usual practices. The main outcome measure was patient-graded Global Aesthetic Improvement Scale scores at 1, 3, 6, and 12 months after treatment. Scores range from 1 to 5; 1 indicates very much improved and 5, worse. A total of 61 consecutive, healthy adult patients (mean [SD] age, 57.4 [12.8] years) with mild to severe facial volume loss were enrolled in the study. A total of 46 patients (75%) were white, 3 (5%) were black/African American, 9 (15%) were Hispanic/Latino, 1 (2%) was Asian/Pacific Islander, and 2 (3%) were other. Three patients (5%) were male, and 58 (95%) were female. Mean initial treatment volume was 1.6 mL. At follow-up, 29 patients (48%) elected to have a touch-up treatment; mean total touch-up volume was 1.4 mL. The patient-graded Global Aesthetic Improvement Scale scores at 1, 3, 6, and 12 months after treatment demonstrated that 73% (41 of 56) to 89% (24 of 27) of the study patients reported being very much or moderately improved. Most patients were rated by investigators on the Global Aesthetic Improvement Scale as very much or moderately improved at the 12-month follow-up. At 12 months after the procedure, 43 of 51 patients (84%) reported satisfaction with their outcome. At all time points, most patients would elect to undergo the procedure again (range, 17 [68%] to 61 [100%]). Adverse events were mild, and all resolved spontaneously within 14 days. At the 2-year follow-up, there were no reports of delayed adverse events. Midface volumization using the low volumes of hyaluronic acid filler more commonly used in daily clinical practice is effective and well tolerated. 3.

Survey of college students on iPod use and hearing health.

PubMed

Danhauer, Jeffrey L; Johnson, Carole E; Byrd, Anne; DeGood, Laura; Meuel, Caitlin; Pecile, Angela; Koch, Lindsey L

2009-01-01

The popularity of personal listening devices (PLDs) including iPods has increased dramatically over the past decade. PLDs allow users to listen to music uninterrupted for prolonged periods and at levels that may pose a risk for hearing loss in some listeners, particularly those using earbud earphones that fail to attenuate high ambient noise levels and necessitate increasing volume for acoustic enjoyment. Earlier studies have documented PLD use by teenagers and adults, but omitted college students, which represent a large segment of individuals who use these devices. This study surveyed college students' knowledge about, experiences with, attitudes toward, and practices and preferences for hearing health and use of iPods and/or other PLDs. The study was designed to help determine the need, content, and preferred format for educational outreach campaigns regarding safe iPod use to college students. An 83-item questionnaire was designed and used to survey college students' knowledge about, experiences with, attitudes toward, and practices/preferences for hearing health and PLD use. The questionnaire assessed Demographics and Knowledge of Hearing Health, iPod Users' Practices and Preferences, Attitudes toward iPod Use, and Reasons for iPod Use. Generally, most college students were knowledgeable about hearing health but could use information about signs of and how to prevent hearing loss. Two-thirds of these students used iPods, but not at levels or for durations that should pose excessive risks for hearing loss when listening in quiet environments. However, most iPod users could be at risk for hearing loss given a combination of common practices. Most of these college students should not be at great risk of hearing loss from their iPods when used conscientiously. Some concern is warranted for a small segment of these students who seemed to be most at risk because they listened to their iPods at high volume levels for long durations using earbuds, and reported that they may already have hearing loss due to their iPods.

Copper and zinc removal from roof runoff: from research to full-scale adsorber systems.

PubMed

Steiner, M; Boller, M

2006-01-01

Large, uncoated copper and zinc roofs cause environmental problems if their runoff is infiltrated into the underground or discharged into receiving waters. Since source control is not always feasible, barrier systems for efficient copper and zinc removal are recommended in Switzerland. During the last few years, research carried out in order to test the performance of GIH-calcite adsorber filters as a barrier system. Adsorption and mass transport processes were assessed and described in a mathematical model. However, this model is not suitable for practical design, because it does not give explicit access to design parameters such as adsorber diameter and adsorber bed depth. Therefore, for e.g. engineers, an easy to use design guideline for GIH-calcite adsorber systems was developed, mainly based on the mathematical model. The core of this guideline is the design of the depth of the GIH-calcite adsorber layer. The depth is calculated by adding up the GIH depth for sorption equilibrium and the depth for the mass transfer zone (MTZ). Additionally, the arrangement of other adsorber system components such as particle separation and retention volume was considered in the guideline. Investigations of a full-scale adsorber confirm the successful application of this newly developed design guideline for the application of GIH-calcite adsorber systems in practice.

Aeroacoustics of Flight Vehicles: Theory and Practice. Volume 1. Noise Sources

DTIC Science & Technology

1991-08-01

243. 62 Brown, Garry L.; and Roshko, Anatol On Density Effects and Large Structure in Turbulent Mixing Layers J. Fluid Aeci, vol 64, pt 4, July 24, 1974...Structure in Jet Turbulence. J. Fluid Mech., vol. 48, pt. 3, Aug. 16, 1971, pp. 547-591. 2 Brown, Garry L., and Roshko, Anatol On Density Effects and Large...depending on such things as engine power setting and combustor and turbine design considerations. The dominant frequencies associated with both combustion

Computer-Based Instruction in Military Environments: Defense Research Series. Volume 1

DTIC Science & Technology

1987-01-01

following papers you will find both a practical and scientific basis for the way current and future training and training systems shouli be designed, applied...should be expended on the many payoffs of computer based instructional techniques. As you study these papers be aware that they are only part of the...your goal is to accomplish XXX, you should next do YYY" Conceptual Model orientation: "XXX will effect YYY by accomplishing ZZZ, which in turn effects

Analysis of a librarian-mediated literature search service.

PubMed

Friesen, Carol; Lê, Mê-Linh; Cooke, Carol; Raynard, Melissa

2015-01-01

Librarian-mediated literature searching is a key service provided at medical libraries. This analysis outlines ten years of data on 19,248 literature searches and describes information on the volume and frequency of search requests, time spent per search, databases used, and professional designations of the patron requestors. Combined with information on best practices for expert searching and evaluations of similar services, these findings were used to form recommendations on the improvement and standardization of a literature search service at a large health library system.

A simple and clinically relevant combination of neuroimaging and functional indexes for the identification of those at highest risk of Alzheimer's disease.

PubMed

Tabatabaei-Jafari, Hossein; Walsh, Erin; Shaw, Marnie E; Cherbuin, Nicolas

2018-06-01

The current challenge in clinical practice is to identify those with mild cognitive impairment (MCI), who are at greater risk of Alzheimer's disease (AD) conversion in the near future. The aim of this study was to assess a clinically practical new hippocampal index-hippocampal volume normalized by cerebellar volume (hippocampus to cerebellum volume ratio) used alone or in combination with scores on the Mini-Mental State Examination, as a predictor of conversion from MCI to AD. The predictive value of the HCCR was also contrasted to that of the hippocampal volume to intracranial volume ratio. The findings revealed that the performance of the combination of measures was significantly better than that of each measure used individually. The combination of Mini-Mental State Examination and hippocampal volume, normalized by the cerebellum or by intracranial volume, accurately discriminated individuals with MCI who progress to AD within 5 years from other MCI types (stable, reverters) and those with intact cognition (area under receiver operating curve of 0.88 and 0.89, respectively). Normalization by cerebellar volume was as accurate as normalization by intracranial volume with the advantage of being more practical, particularly for serial assessments. Copyright © 2018 Elsevier Inc. All rights reserved.

Review of Musculoskeletal Injuries and Prevention in the Endoscopy Practitioner

PubMed Central

2014-01-01

Practitioners of endoscopy often experience musculoskeletal pain and injury (most often in the back, neck, shoulders, hands, wrists, and thumbs) that are associated with the minute and repetitive strain that is placed on these areas during endoscopic procedures. This review of the current documentation of endoscopy-related pain and injuries among practitioners finds that such problems are widespread and specific in kind as well as strongly correlated with high procedure volume and procedure duration. Research on the nature and impact of cumulative trauma and overuse syndromes in other professions such as dentistry, pianists, production labor, and athletics is brought to bear on the work of the endoscopist. A more thorough understanding of the nature and prevalence of work-related pain and injury sustained by endoscopists should inform further development of ergonomic practices and equipment design. This article reviews current recommendations for ergonomic design in the endoscopy procedure space and finds that reported compliance with those recommendations is quite low. Strategies for the management of the risk of musculoskeletal injuries related to the practice of endoscopy include compliance with currently recommended ergonomic practices, education of trainees in ergonomic technique when practicing endoscopy, and research toward the modification and development of more ergonomic endoscopes and procedure spaces. PMID:24798940

Patient-Physician Web Messaging

PubMed Central

Liederman, Eric M; Lee, Jerry C; Baquero, Victor H; Seites, Paul G

2005-01-01

BACKGROUND Patients want electronic access to providers. Providers fear being overwhelmed by unreimbursed messages. OBJECTIVE Measure the effects of patient-physician web messaging on primary care practices. DESIGN/SETTING Retrospective analysis of 6 case and 9 control internal medicine (IM) and family practice (FP) physicians' message volume, and a survey of 5,971 patients' web messaging with 267 providers and staff in 16 community primary care clinics in the Sacramento, CA region. MEASUREMENTS AND MAIN RESULTS Case telephone volume was 18.2% lower (P =.002) and fell 6.50 times faster than control. Case total telephone plus web message volume was 13.7% lower (P =.025) and fell 5.84 times faster than control. Surveys were responded to by 40.3% (1,743/4,320) of patients and 61.4% (164/267) of providers and staff. Patients were overwhelmingly satisfied and providers and staff were generally satisfied; both found the system easy to use. Patient satisfaction correlated strongly with provider response time (Γ=0.557), and provider/staff satisfaction with computer skills (Γ=0.626) (Goodman-Kruskal Gamma [Γ] measure of ordinal association). CONCLUSIONS Secure web messaging improves on e-mail with encryption, access controls, message templates, customized message and prescription routing, knowledge content, and reimbursement. Further study is needed to determine whether reducing telephone traffic through the use of web messaging decreases provider interruptions and increases clinical efficiency during the workday. Satisfaction with web messaging may increase patient retention. PMID:15693928

Developing a cardiopulmonary exercise testing laboratory.

PubMed

Diamond, Edward

2007-12-01

Cardiopulmonary exercise testing is a noninvasive and cost-effective technique that adds significant value to the assessment and management of a variety of symptoms and diseases. The penetration of this testing in medical practice may be limited by perceived operational and financial barriers. This article reviews coding and supervision requirements related to both simple and complex pulmonary stress testing. A program evaluation and review technique diagram is used to describe the work flow process. Data from our laboratory are used to generate an income statement that separates fixed and variable costs and calculates the contribution margin. A cost-volume-profit (break-even) analysis is then performed. Using data from our laboratory including fixed and variable costs, payer mix, reimbursements by payer, and the assumption that the studies are divided evenly between simple and complex pulmonary stress tests, the break-even number is calculated to be 300 tests per year. A calculator with embedded formulas has been designed by the author and is available on request. Developing a cardiopulmonary exercise laboratory is challenging but achievable and potentially profitable. It should be considered by a practice that seeks to distinguish itself as a quality leader. Providing this clinically valuable service may yield indirect benefits such as increased patient volume and increased utilization of other services provided by the practice. The decision for a medical practice to commit resources to managerial accounting support requires a cost-benefit analysis, but may be a worthwhile investment in our challenging economic environment.

Safety analysis of urban signalized intersections under mixed traffic.

PubMed

S, Anjana; M V L R, Anjaneyulu

2015-02-01

This study examined the crash causative factors of signalized intersections under mixed traffic using advanced statistical models. Hierarchical Poisson regression and logistic regression models were developed to predict the crash frequency and severity of signalized intersection approaches. The prediction models helped to develop general safety countermeasures for signalized intersections. The study shows that exclusive left turn lanes and countdown timers are beneficial for improving the safety of signalized intersections. Safety is also influenced by the presence of a surveillance camera, green time, median width, traffic volume, and proportion of two wheelers in the traffic stream. The factors that influence the severity of crashes were also identified in this study. As a practical application, the safe values of deviation of green time provided from design green time, with varying traffic volume, is presented in this study. This is a useful tool for setting the appropriate green time for a signalized intersection approach with variations in the traffic volume. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mod-5A wind turbine generator program design report. Volume 3: Final design and system description, book 2

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3MW MOD-5A wind turbine generator is documented. The report is divided into four volumes: Volume 1 summarizes the entire MOD-5A program, Volume 2 discusses the conceptual and preliminary design phases, Volume 3 describes the final design of the MOD-5A, and Volume 4 contains the drawings and specifications developed for the final design. Volume 3, book 2 describes the performance and characteristics of the MOD-5A wind turbine generator in its final configuration. The subsystem for power generation, control, and instrumentation subsystems is described in detail. The manufacturing and construction plans, and the preparation of a potential site on Oahu, Hawaii, are documented. The quality assurance and safety plan, and analyses of failure modes and effects, and reliability, availability and maintainability are presented.

Pollution Prevention Benefits Manual: Phase II. Volume 1: The Manual and Volume 2: Appendices (1989)

EPA Pesticide Factsheets

Manual is intended to help polluters evaluate the economic feasibility of pollution prevention or waste minimization alternatives to current practices, helping polluters evaluate how much a pollution prevention alternative will cost vs. current practices.

Optimization of green infrastructure network at semi-urbanized watersheds to manage stormwater volume, peak flow and life cycle cost: Case study of Dead Run watershed in Maryland

NASA Astrophysics Data System (ADS)

Heidari Haratmeh, B.; Rai, A.; Minsker, B. S.

2016-12-01

Green Infrastructure (GI) has become widely known as a sustainable solution for stormwater management in urban environments. Despite more recognition and acknowledgment, researchers and practitioners lack clear and explicit guidelines on how GI practices should be implemented in urban settings. This study is developing a noisy-based multi-objective, multi-scaled genetic algorithm that determines optimal GI networks for environmental, economic and social objectives. The methodology accounts for uncertainty in modeling results and is designed to perform at sub-watershed as well as patch scale using two different simulation models, SWMM and RHESSys, in a Cloud-based implementation using a Web interface. As an initial case study, a semi-urbanized watershed— DeadRun 5— in Baltimore County, Maryland, is selected. The objective of the study is to minimize life cycle cost, maximize human preference for human well-being and the difference between pre-development hydrographs generated from current rainfall events and design storms, as well as those that result from proposed GI scenarios. Initial results for DeadRun5 watershed suggest that placing GI in the proximity of the watershed outlet optimizes life cycle cost, stormwater volume, and peak flow capture. The framework can easily present outcomes of GI design scenarios to both designers and local stakeholders, and future plans include receiving feedback from users on candidate designs, and interactively updating optimal GI network designs in a crowd-sourced design process. This approach can also be helpful in deriving design guidelines that better meet stakeholder needs.

Prostate Brachytherapy Case Volumes by Academic and Nonacademic Practices: Implications for Future Residency Training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orio, Peter F., E-mail: PORIO@lroc.harvard.edu; Harvard Medical School, Boston, Massachusetts; Nguyen, Paul L.

Purpose: The use of prostate brachytherapy has continued to decline in the United States. We examined the national practice patterns of both academic and nonacademic practices performing prostate brachytherapy by case volume per year to further characterize the decline and postulate the effect this trend might have on training the next generation of residents. Methods and Materials: Men diagnosed with prostate cancer who had undergone radiation therapy in 2004 to 2012 were identified. The annual brachytherapy case volume at each facility was determined and further categorized into ≤12 cases per year (ie, an average of ≤1 cases per month), 13more » to 52 cases per year, and ≥53 cases per year (ie, an average of ≥1 cases per week) in academic practices versus nonacademic practices. Results: In 2004 to 2012, academic practices performing an average of ≤1 brachytherapy cases per month increased from 56.4% to 73.7%. In nonacademic practices, this percentage increased from 60.2% to 77.4% (P<.0001 for both). Practices performing an average of ≥1 cases per week decreased among both academic practices (from 6.7% to 1.5%) and nonacademic practices (from 4.5% to 2.7%). Conclusions: Both academic and nonacademic radiation oncology practices have demonstrated a significant reduction in the use of prostate brachytherapy from 2004 to 2012. With the case volume continuing to decline, it is unclear whether we are prepared to train the next generation of residents in this critical modality.« less

Practical application of power conditioning to electric propulsion for passenger vehicles

NASA Technical Reports Server (NTRS)

Demerdash, N. A.; Lee, F. C.; Nehl, T. W.; Overton, B. P.

1980-01-01

A functional model 15 HP, 120 volt, 4-pole, 7600 r.p.m. samarium-cobalt permanent magnet type brushless dc motor-transistorized power conditioner unit was designed, fabricated and tested for specific use in propulsion of electric passenger vehicles. This new brushless motor system, including its power conditioner package, has a number of important advantages over existing systems such as reduced weight and volume, higher reliability, and potential for improvements in efficiencies. These advantages are discussed in this paper in light of the substantial test data collected during experimentation with the newly developed conditioner motor propulsion system. Details of the power conditioner design philosophy and particulars are given in the paper. Also, described here are the low level electronic design and operation in relation to the remainder of the system.

Optical memory development. Volume 1: prototype memory system

NASA Technical Reports Server (NTRS)

Cosentino, L. S.; Mezrich, R. S.; Nagle, E. M.; Stewart, W. C.; Wendt, F. S.

1972-01-01

The design, development, and implementation of a prototype, partially populated, million bit read-write holographic memory system using state-of-the-art components are described. The system employs an argon ion laser, acoustooptic beam deflectors, a holographic beam splitter (hololens), a nematic liquid crystal page composer, a photoconductor-thermoplastic erasable storage medium, a silicon P-I-N photodiode array, with lenses and electronics of both conventional and custom design. Operation of the prototype memory system was successfully demonstrated. Careful attention is given to the analysis from which the design criteria were developed. Specifications for the major components are listed, along with the details of their construction and performance. The primary conclusion resulting from this program is that the basic principles of read-write holographic memory system are well understood and are reducible to practice.

The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 3

NASA Technical Reports Server (NTRS)

Onwubiko, Chin-Yere; Onyebueke, Landon

1996-01-01

Structural failure is rarely a "sudden death" type of event, such sudden failures may occur only under abnormal loadings like bomb or gas explosions and very strong earthquakes. In most cases, structures fail due to damage accumulated under normal loadings such as wind loads, dead and live loads. The consequence of cumulative damage will affect the reliability of surviving components and finally causes collapse of the system. The cumulative damage effects on system reliability under time-invariant loadings are of practical interest in structural design and therefore will be investigated in this study. The scope of this study is, however, restricted to the consideration of damage accumulation as the increase in the number of failed components due to the violation of their strength limits.

Development of termination and utilization concepts for flat conductor cables. Volume 1: Development of low profile flat conductor cable connecting device and permanent splice

NASA Technical Reports Server (NTRS)

1972-01-01

The development of low-profile flat conductor cable (FCC) connecting device and FCC permanent splice methods are discussed. The design goal for the low-profile connecting device was to mate and unmate FCC harness to a typical spacecraft component with a maximum height of 3/8 in. The results indicate that the design, fabrication, and processing of the low-profile connecting device are feasible and practical. Some redesign will be required to achieve the goal of 3/8 in. Also, failures were experienced subsequent to salt spray and humidity exposure. Five different FCC permanent splice methods were considered. Subsequent to evaluation of these five methods, two design concepts were chosen for development tests.

Optimization of the convection volume in online post-dilution haemodiafiltration: practical and technical issues

PubMed Central

Chapdelaine, Isabelle; de Roij van Zuijdewijn, Camiel L.M.; Mostovaya, Ira M.; Lévesque, Renée; Davenport, Andrew; Blankestijn, Peter J.; Wanner, Christoph; Nubé, Menso J.; Grooteman, Muriel P.C.

2015-01-01

In post-dilution online haemodiafiltration (ol-HDF), a relationship has been demonstrated between the magnitude of the convection volume and survival. However, to achieve high convection volumes (>22 L per session) detailed notion of its determining factors is highly desirable. This manuscript summarizes practical problems and pitfalls that were encountered during the quest for high convection volumes. Specifically, it addresses issues such as type of vascular access, needles, blood flow rate, recirculation, filtration fraction, anticoagulation and dialysers. Finally, five of the main HDF systems in Europe are briefly described as far as HDF prescription and optimization of the convection volume is concerned. PMID:25815176

Human Integration Design Processes (HIDP)

NASA Technical Reports Server (NTRS)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference missions. The HIDP is a reference document that is intended to be used during the development of crewed space systems and operations to guide human-systems development process activities.

Influence of face mask design on bag-valve-mask ventilation performance: a randomized simulation study.

PubMed

Na, J U; Han, S K; Choi, P C; Cho, J H; Shin, D H

2013-10-01

Different face mask designs can influence bag-valve-mask (BVM) ventilation performance during resuscitation. We compared a single-use, air-cushioned face mask (AM) with a reusable silicone face mask (SM) for quality of BVM ventilation on a manikin simulating cardiac arrest. Thirty-two physicians were recruited, and a prospective, randomized, crossover observational study was conducted after an American Heart Association-accredited basic life support provider course and standardized practice time were completed. Participants performed 12 cycles of BVM ventilation with both the AM and SM on a SmartMan lung simulator. Mean tidal volume was significantly higher in ventilations performed using the AM vs. the SM (548 ± 159 ml vs. 439 ± 163 ml, P < 0.01). In addition, the proportion of low-volume ventilation was significantly lower with the AM than the SM [6/12 (2-11) vs. 9/12 (5-12), P = 0.03]. Bag-valve-AM ventilation volume was not affected by the physical characteristics of the rescuers, except for sex. In contrast, bag-valve-SM ventilation volume was affected by most of the characteristics tested, including sex, height, weight, hand width, hand length, and grip power. The AM seems to be a more efficient face mask than the SM at delivering sufficient ventilation volumes. The performance of the AM did not seem to be associated with the physical characteristics of the rescuers, whereas that of the SM was affected by these factors. The SM may not be an appropriate face mask for performing one-person BVM ventilation during resuscitation for rescuers who are smaller in stature, have a smaller hand size, or have weaker grip power. © 2013 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

A study of a space communication system for the control and monitoring of the electric distribution system. Volume 2: Supporting data and analyses

NASA Technical Reports Server (NTRS)

Vaisnys, A.

1980-01-01

It is technically feasible to design a satellite communication system to serve the United States electric utility industry's needs relative to load management, real-time operations management, remote meter reading and to determine the costs of various elements of the system. The functions associated with distribution automation and control and communication system requirements are defined. Factors related to formulating viable communication concepts, the relationship of various design factors to utility operating practices, and the results of the cost analysis are discussed The system concept and several ways in which the concept could be integrated into the utility industry are described.

Radiation shielding for deep space manned missions by cryogen free superconducting magnets.

NASA Astrophysics Data System (ADS)

Spillantini, Piero

In last years some activity was dedicated to the solution of the following problem: can be artificially created, around a space vehicle in a manned interplanetary travel or around a manned `space base' in deep space, a magnetic field approaching as much as possible the terrestrial one in terms of bending power on the arriving particles? Preliminary evaluations for active shielding based on superconducting magnets were made a few years ago in ESA supported studies. The present increasing interest of permanent space `bases' located in `deep' space requires that this activity continue toward the goal of protecting from Galactic Cosmic Ray (GCR) a large volume `habitat', allowing long duration permanence in space to citizens conducting there `normal' activities besides to a restricted number of astronauts. The problem had to be stated at this global scale because it must be afforded as soon as possible for preparing the needed technologies and their integration in the spacecraft designs for the future manned exploration and for inhabitation of deep space. The realization of the magnetic protection of large volume habitats by well-established nowadays materials and techniques is in principle possible, but not workable in practice for the huge required mass of the superconductor, the too low operating temperature (10K) and the corresponding required cooling power and thermal shielding. The concept of Cryogen Free Superconducting Magnets is the only one practicable. Fast progress in the production of reliable High Temperature Superconducting (HTS) or MgB2 cables and of cryocoolers suitable for space operation opens the perspective of practicable solutions. Quantitative evaluations for the protection of large volume habitats in deep space from GCRs are reported and discussed.

A practical model for pressure probe system response estimation (with review of existing models)

NASA Astrophysics Data System (ADS)

Hall, B. F.; Povey, T.

2018-04-01

The accurate estimation of the unsteady response (bandwidth) of pneumatic pressure probe systems (probe, line and transducer volume) is a common practical problem encountered in the design of aerodynamic experiments. Understanding the bandwidth of the probe system is necessary to capture unsteady flow features accurately. Where traversing probes are used, the desired traverse speed and spatial gradients in the flow dictate the minimum probe system bandwidth required to resolve the flow. Existing approaches for bandwidth estimation are either complex or inaccurate in implementation, so probes are often designed based on experience. Where probe system bandwidth is characterized, it is often done experimentally, requiring careful experimental set-up and analysis. There is a need for a relatively simple but accurate model for estimation of probe system bandwidth. A new model is presented for the accurate estimation of pressure probe bandwidth for simple probes commonly used in wind tunnel environments; experimental validation is provided. An additional, simple graphical method for air is included for convenience.

Improving EHR Capabilities to Facilitate Stage 3 Meaningful Use Care Coordination Criteria.

PubMed

Cross, Dori A; Cohen, Genna R; Nong, Paige; Day, Anya-Victoria; Vibbert, Danielle; Naraharisetti, Ramya; Adler-Milstein, Julia

Primary care practices have been limited in their ability to leverage electronic health records (EHRs) and health information exchange (HIE) to improve care coordination, but will soon be incentivized to do so under proposed Stage 3 meaningful use criteria. We use mixed methods to understand how primary care practices manage, share and reconcile electronic patient information across care settings, and identify innovations in EHR design to support enhanced care coordination. Opportunities identified by practices focused on availability and usability of features that facilitate (1) generation of customized summary of care records, (2) team-based care approaches, and (3) management of the increased volume of electronic information generated and exchanged during care transitions. More broadly, vendors and policymakers need to continue to work together to improve interoperability as the key to effective care coordination. If these EHR innovations were widespread, the value of meeting the proposed Stage 3 care coordination criteria would be substantially enhanced.

Conclusion: Agency in the face of complexity and the future of assumption-aware evaluation practice.

PubMed

Morrow, Nathan; Nkwake, Apollo M

2016-12-01

This final chapter in the volume pulls together common themes from the diverse set of articles by a group of eight authors in this issue, and presents some reflections on the next steps for improving the ways in which evaluators work with assumptions. Collectively, the authors provide a broad overview of existing and emerging approaches to the articulation and use of assumptions in evaluation theory and practice. The authors reiterate the rationale and key terminology as a common basis for working with assumption in program design and evaluation. They highlight some useful concepts and categorizations to promote more rigorous treatment of assumptions in evaluation. A three-tier framework for fostering agency for assumption-aware evaluation practice is proposed-agency for themselves (evaluators); agency for others (stakeholders); and agency for standards and principles. Copyright © 2016 Elsevier Ltd. All rights reserved.

CD volume design and verification

NASA Technical Reports Server (NTRS)

Li, Y. P.; Hughes, J. S.

1993-01-01

In this paper, we describe a prototype for CD-ROM volume design and verification. This prototype allows users to create their own model of CD volumes by modifying a prototypical model. Rule-based verification of the test volumes can then be performed later on against the volume definition. This working prototype has proven the concept of model-driven rule-based design and verification for large quantity of data. The model defined for the CD-ROM volumes becomes a data model as well as an executable specification.

Increased Grey Matter Associated with Long-Term Sahaja Yoga Meditation: A Voxel-Based Morphometry Study.

PubMed

Hernández, Sergio Elías; Suero, José; Barros, Alfonso; González-Mora, José Luis; Rubia, Katya

2016-01-01

To investigate regional differences in grey matter volume associated with the practice of Sahaja Yoga Meditation. Twenty three experienced practitioners of Sahaja Yoga Meditation and twenty three non-meditators matched on age, gender and education level, were scanned using structural Magnetic Resonance Imaging and their grey matter volume were compared using Voxel-Based Morphometry. Grey matter volume was larger in meditators relative to non-meditators across the whole brain. In addition, grey matter volume was larger in several predominantly right hemispheric regions: in insula, ventromedial orbitofrontal cortex, inferior temporal and parietal cortices as well as in left ventrolateral prefrontal cortex and left insula. No areas with larger grey matter volume were found in non-meditators relative to meditators. The study shows that long-term practice of Sahaja Yoga Meditation is associated with larger grey matter volume overall, and with regional enlargement in several right hemispheric cortical and subcortical brain regions that are associated with sustained attention, self-control, compassion and interoceptive perception. The increased grey matter volume in these attention and self-control mediating regions suggests use-dependent enlargement with regular practice of this meditation.

Automobile Engine Control Parameters Study : Volume 1. Summary and Status of Domestic Engine Control Practice

DOT National Transportation Integrated Search

1977-02-01

This report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume I presents detailed technical information on the engine control practices used by selected do...

Acquisition Regulations and Offshore Software Development: Implications for Cybersecurity of DOD Networks

DTIC Science & Technology

2013-02-14

Kessler, “Protection and Protectionism: The Practicalities of Offshore Software Devleopment in Government Procurement,” Public Contract Law Journal, Volume...Protection and Protectionism: The Practicalities of Offshore Software Development In Government Procurement,” Public Contract Law Journal, Volume 38, No. 1

Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (33rd, Anaheim, California, 2010). Volume 2

ERIC Educational Resources Information Center

Simonson, Michael, Ed.

2010-01-01

For the thirty-third year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This is Volume #2 of the 33rd "Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology." This volume includes…

High Performing Colleges. The Malcolm Baldrige National Quality Award as a Framework for Improving Higher Education. Volume I: Theory and Concepts [and] Volume II: Case and Practice.

ERIC Educational Resources Information Center

Seymour, Daniel, Ed.; And Others

This publication provides research-based discussion in 20 chapters of possible extension of the Malcolm Baldrige National Quality Award to honor high performing colleges. Chapters are organized into two volumes, the first exploring a broad range of issues from a scholarly point of view and the second emphasizing the practical application of a…

Chemical Laser Facility Study. Volume III. Cost Analysis.

DTIC Science & Technology

Chemical Laser Test Facility. The design criteria for the architectural and engineering design of the facility are presented in Volume I and the design requirements for the Laser Test System are presented in Volume II.

Recommendations for Improving Identification and Quantification in Non-Targeted, GC-MS-Based Metabolomic Profiling of Human Plasma

PubMed Central

Wang, Hanghang; Muehlbauer, Michael J.; O’Neal, Sara K.; Newgard, Christopher B.; Hauser, Elizabeth R.; Shah, Svati H.

2017-01-01

The field of metabolomics as applied to human disease and health is rapidly expanding. In recent efforts of metabolomics research, greater emphasis has been placed on quality control and method validation. In this study, we report an experience with quality control and a practical application of method validation. Specifically, we sought to identify and modify steps in gas chromatography-mass spectrometry (GC-MS)-based, non-targeted metabolomic profiling of human plasma that could influence metabolite identification and quantification. Our experimental design included two studies: (1) a limiting-dilution study, which investigated the effects of dilution on analyte identification and quantification; and (2) a concentration-specific study, which compared the optimal plasma extract volume established in the first study with the volume used in the current institutional protocol. We confirmed that contaminants, concentration, repeatability and intermediate precision are major factors influencing metabolite identification and quantification. In addition, we established methods for improved metabolite identification and quantification, which were summarized to provide recommendations for experimental design of GC-MS-based non-targeted profiling of human plasma. PMID:28841195

An Independent Scientific Assessment of Well Stimulation in California Volume I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Birkholzer, Jens

In 2013, the California Legislature passed Senate Bill 4 (SB 4), setting the framework for regulation of well stimulation technologies in California, including hydraulic fracturing. SB 4 also requires the California Natural Resources Agency to conduct an independent scientific study of well stimulation technologies in California to assess current and potential future practices, including the likelihood that well stimulation technologies could enable extensive new petroleum production in the state, evaluate the impacts of well stimulation technologies and the gaps in data that preclude this understanding, identify risks associated with current practices, and identify alternative practices which might limit these risks.more » The study is issued in three volumes. This document, Volume I, provides the factual basis describing well stimulation technologies, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II discusses how well stimulation affects water, the atmosphere, seismic activity, wildlife and vegetation, traffic, light and noise levels; it will also explore human health hazards, and identify data gaps and alternative practices. Volume III presents case studies to assess environmental issues and qualitative« less

Life and Utilization Criteria Identification in Design (LUCID). Volume II

DTIC Science & Technology

1981-10-01

AFWAL-.TR.412101 VOLUME Iff LIFE AND UTILIZATION CRITERIA IDENTIFICATION oIN DESIGN , VOLUME I[ SMcDonnell Aircraft Company SMcDonnell Douglas... design , a complexinteractive air- craft/engine design effort is conducted. The primary objective of the Life and Utilization Criteria Identification in... Design (LUCID) Program was to develop and demonstrate techniques which will aid in identifying, during conceptual design , balanced and consistent

Language Teacher Research in Asia

ERIC Educational Resources Information Center

Farrell, Thomas S. C., Ed.

2006-01-01

The Language Teacher Research Series aims to connect research and practice by highlighting the insights that teachers themselves describe after examining their own practices. This first volume of the five-volume series presents research conducted by language teachers at all levels, from high school English teachers to English language teacher…

The Two-Wavelength Method of Microspectrophotometry

PubMed Central

Mendelsohn, Mortimer L.

1958-01-01

In spite of a number of examples of the apparently successful application of the two-wavelength method of microspectrophotometry to biological materials, a demonstration of the effective transition from the theoretical to the practical aspects of the method has never been given. The following tests were carried out on model systems in order to confirm the practical validity of the method: (1) Spherical droplets of Sudan blue or Sudan IV (varying in volume by as much as 400 times) were measured with the surrounding blank field included and were found to have amounts of chromophore which conformed to the estimated droplet volume to within 3 to 6 per cent. (2) Repeated determinations on the same isolated nucleus gave results which did not vary in spite of wide variations in the area of the photometric field. (3) The results of repeated determinations on the same droplet of dye were unaffected by gross changes in the focus of the objective. The microspectrophotometer on which these measurements were made has been briefly described; it was designed specifically for the two-wavelength method. Some of the details of instrumentation have been discussed, in particular, the effects of non-uniform illumination and the contrasting demands of the two integral parts of this type of photometry. Although it has certain limitations, the two-wavelength method conforms to its theoretical promise and is a practical method of measuring light absorption in complex objects. PMID:13563548

Aerospace Structures Technology Damping Design Guide. Volume 1. Technology Review

DTIC Science & Technology

1985-12-01

AFWAL-TR-84-3089 Volume I AEROSPACE STRUCTURES TECHNOLOGY I DAMPING DESIGN GUIDE VOLUME I - TECHNOLOGY REVIEW J. SOOVERE LOCKHEED CALIFORNIA COMPANY...3089 Volume I AEROSPACE STRUCTURES TECHNOLOGY DAMPING DESIGN GUIDE VOLUME I - TECHNOLOGY REVIEW J. SOOVERE LOCKMD CALIFORNIA COMPANY P.O. BOX 551 BURBANK...PATTERSON AIR FORCE BASE, OHIO 454t33I I ft NOTICE When Government drawings, specifications, or other data are used for any purpose other than in

A post audit of a model-designed ground water extraction system.

PubMed

Andersen, Peter F; Lu, Silong

2003-01-01

Model post audits test the predictive capabilities of ground water models and shed light on their practical limitations. In the work presented here, ground water model predictions were used to design an extraction/treatment/injection system at a military ammunition facility and then were re-evaluated using site-specific water-level data collected approximately one year after system startup. The water-level data indicated that performance specifications for the design, i.e., containment, had been achieved over the required area, but that predicted water-level changes were greater than observed, particularly in the deeper zones of the aquifer. Probable model error was investigated by determining the changes that were required to obtain an improved match to observed water-level changes. This analysis suggests that the originally estimated hydraulic properties were in error by a factor of two to five. These errors may have resulted from attributing less importance to data from deeper zones of the aquifer and from applying pumping test results to a volume of material that was larger than the volume affected by the pumping test. To determine the importance of these errors to the predictions of interest, the models were used to simulate the capture zones resulting from the originally estimated and updated parameter values. The study suggests that, despite the model error, the ground water model contributed positively to the design of the remediation system.

Variable-Volume Flushing (V-VF) device for water conservation in toilets

NASA Technical Reports Server (NTRS)

Jasper, Louis J., Jr.

1993-01-01

Thirty five percent of residential indoor water used is flushed down the toilet. Five out of six flushes are for liquid waste only, which requires only a fraction of the water needed for solid waste. Designers of current low-flush toilets (3.5-gal. flush) and ultra-low-flush toilets (1.5-gal. flush) did not consider the vastly reduced amount of water needed to flush liquid waste versus solid waste. Consequently, these toilets are less practical than desired and can be improved upon for water conservation. This paper describes a variable-volume flushing (V-VF) device that is more reliable than the currently used flushing devices (it will not leak), is simple, more economical, and more water conserving (allowing one to choose the amount of water to use for flushing solid and liquid waste).

Solar cell array design handbook, volume 1

NASA Technical Reports Server (NTRS)

Rauschenbach, H. S.

1976-01-01

Twelve chapters discuss the following: historical developments, the environment and its effects, solar cells, solar cell filters and covers, solar cell and other electrical interconnections, blocking and shunt diodes, substrates and deployment mechanisms, material properties, design synthesis and optimization, design analysis, procurement, production and cost aspects, evaluation and test, orbital performance, and illustrative design examples. A comprehensive index permits rapid locating of desired topics. The handbook consists of two volumes: Volume 1 is of an expository nature while Volume 2 contains detailed design data in an appendix-like fashion. Volume 2 includes solar cell performance data, applicable unit conversion factors and physical constants, and mechanical, electrical, thermal optical, magnetic, and outgassing material properties. Extensive references are provided.

A Worldwide Survey on Peyronie's Disease Surgical Practice Patterns Among Surgeons.

PubMed

Chung, Eric; Wang, Run; Ralph, David; Levine, Laurence; Brock, Gerald

2018-04-01

Despite published guidelines on Peyronie's disease (PD), there are limited data on actual surgical practice among surgeons. To evaluate the surgical practice patterns in PD among surgeons from different continents and members of various sexual medicine societies. An anonymous survey on various pre-, intra-, and postoperative aspects of PD surgical care was distributed in printed format during International Society of Sexual Medicine meetings and as an online survey to International Society of Sexual Medicine members. 390 surgeons responded to the survey, with great variations in pre-, intra-, and postoperative strategies in PD surgical care. Most surgeons performed fewer than 10 penile plications and 10 graft surgeries per year. Modified Nesbit plication was the preferred option by most surgeons. Surgeons who received fellowship training were more likely to perform autologous than allograft surgery (odds ratio = 1.79, 95% CI = 1.13-2.82, P = .01). The use of penile color duplex ultrasound was inconsistently performed, with higher-volume surgeons (ie, >20 cases operated a year) more likely to use this diagnostic modality (odds ratio = 70.18, 95% CI = 20.99-234.6, P < .001). Most surgeons agreed that surgical intervention should be performed only after a 6-month history of stable penile curvature, although higher-volume surgeons were more inclined to perform surgery sooner (P = .08). Although it is unknown whether variations in PD surgery significantly affect clinical outcome and patient satisfaction rate, this worldwide survey study has the potential to assist in the formation of a new practice guideline and serve as the basis for future prospective multinational studies. This is one of the largest surveys on PD practice and, to our knowledge, the only survey conducted across various sexual medicine societies, with the inclusion of many high-volume and experienced PD surgeons. This also is the 1st study to comprehensively evaluate many key aspects in surgical practice patterns for PD. However, the categorization on the questionnaire used in this survey was not designed to allow for direct comparison given the possibility of some surgeons with dual society memberships, reporting biases, large CIs in outcomes, different patient demographics, and cultural acceptance. There is great variation in surgical practice patterns in PD management, including key differences among surgeons across different continents and sexual medicine societies. Chung E, Wang R, Ralph D, et al. A Worldwide Survey on Peyronie's Disease Surgical Practice Patterns Among Surgeons. J Sex Med 2018;15:568-575. Copyright © 2018. Published by Elsevier Inc.

Practical Nursing, Volume I. Health Occupations Education.

ERIC Educational Resources Information Center

Rogers, Helen W.; And Others

This curriculum guide provides teachers with up-to-date information and skill-related applications needed by the practical nurse. The volume contains three sections and 24 instructional units: Personal Vocational Relationships (6 units), Nutrition (3 units), and Basic Nursing Principles and Applied Skills (15 units covering such topics as…

Advances in Special Education Volume 11, Issues, Practices and Concerns in Special Education.

ERIC Educational Resources Information Center

Rotatori, Anthony F., Ed.; Schwenn, John O., Ed.; Burkhardt, Sandra, Ed.

This volume presents 14 papers which address current issues and practices in special education. The papers are: (1) "National Educational Reform: General and Special Education" (Joyce Fiddler and Freddie W. Litton); (2) "Linguistically Appropriate Special Education" (Herbert Grossman); (3) "Portfolio Assessment: An Individualized Approach for…

Conceptual Design of a Space-Based Multimegawatt MHD Power System, Task 1 Topical Report; Volume 1: Technical Discussion

DTIC Science & Technology

1988-01-01

system requirements, design guidelines, and interface requirements has been prepared and included as Volume II of this Task 1 topical report. The Volume ...WAESD-TR-88-0002 Conceptual Design Of A Space-Based Multimegawatt MHD Power System ffA«kjjjjjTfc Task 1 Topical Report Volume I: Technical...Space-Based Multimegawatt MHD Power System: Task 1 Topical Report, Volume I: Technical Discussion Personal Author: Dana, RA. Corporate Author Or

Evaluation of non-selective refocusing pulses for 7 T MRI

PubMed Central

Moore, Jay; Jankiewicz, Marcin; Anderson, Adam W.; Gore, John C.

2011-01-01

There is a continuing need for improved RF pulses that achieve proper refocusing in the context of ultra-high field (≥ 7 T) human MRI. Simple block or sinc pulses are highly susceptible to RF field inhomogeneities, and adiabatic pulses are generally considered too SAR intensive for practical use at 7 T. The performance of the array of pulses falling between these extremes, however, has not been systematically evaluated. The aim of this work was to compare the performances of 21 non-selective refocusing pulses spanning a range of durations and SAR levels. The evaluation was based upon simulations and both phantom and in vivo human brain experiments conducted at 7 T. Tested refocusing designs included block, composite block, BIR-4, hyperbolic secant, and numerically optimized composite waveforms. These pulses were divided into three SAR classes and two duration categories, and, based on signal gain in a 3-D spin echo sequence, practical recommendations on usage are made within each category. All evaluated pulses were found to produce greater volume-averaged signals relative to a 180° block pulse. Although signal gains often come with the price of increased SAR or duration, some pulses were found to result in significant signal enhancement while also adhering to practical constraints. This work demonstrates the signal gains and losses realizable with single-channel refocusing pulse designs and should assist in the selection of suitable refocusing pulses for practical 3-D spin-echo imaging at 7 T. It further establishes a reference against which future pulses and multi-channel designs can be compared. PMID:22177384

Designing Studies of Extension Program Results: A Resource for Program Leaders and Specialists. Volume II--Abstracts.

ERIC Educational Resources Information Center

Rivera, William M., Ed.; And Others

These abstracts of 42 studies of extension program results, which make up the second volume of a two-volume resource, are intended to advise state administrative program leaders and others with program evaluation responsibilities of how to design studies of cooperative extension programs. Designed to support volume I, which refers to these…

Volume-of-interest reconstruction from severely truncated data in dental cone-beam CT

NASA Astrophysics Data System (ADS)

Zhang, Zheng; Kusnoto, Budi; Han, Xiao; Sidky, E. Y.; Pan, Xiaochuan

2015-03-01

As cone-beam computed tomography (CBCT) has gained popularity rapidly in dental imaging applications in the past two decades, radiation dose in CBCT imaging remains a potential, health concern to the patients. It is a common practice in dental CBCT imaging that only a small volume of interest (VOI) containing the teeth of interest is illuminated, thus substantially lowering imaging radiation dose. However, this would yield data with severe truncations along both transverse and longitudinal directions. Although images within the VOI reconstructed from truncated data can be of some practical utility, they often are compromised significantly by truncation artifacts. In this work, we investigate optimization-based reconstruction algorithms for VOI image reconstruction from CBCT data of dental patients containing severe truncations. In an attempt to further reduce imaging dose, we also investigate optimization-based image reconstruction from severely truncated data collected at projection views substantially fewer than those used in clinical dental applications. Results of our study show that appropriately designed optimization-based reconstruction can yield VOI images with reduced truncation artifacts, and that, when reconstructing from only one half, or even one quarter, of clinical data, it can also produce VOI images comparable to that of clinical images.

Optimizing methods and dodging pitfalls in microbiome research.

PubMed

Kim, Dorothy; Hofstaedter, Casey E; Zhao, Chunyu; Mattei, Lisa; Tanes, Ceylan; Clarke, Erik; Lauder, Abigail; Sherrill-Mix, Scott; Chehoud, Christel; Kelsen, Judith; Conrad, Máire; Collman, Ronald G; Baldassano, Robert; Bushman, Frederic D; Bittinger, Kyle

2017-05-05

Research on the human microbiome has yielded numerous insights into health and disease, but also has resulted in a wealth of experimental artifacts. Here, we present suggestions for optimizing experimental design and avoiding known pitfalls, organized in the typical order in which studies are carried out. We first review best practices in experimental design and introduce common confounders such as age, diet, antibiotic use, pet ownership, longitudinal instability, and microbial sharing during cohousing in animal studies. Typically, samples will need to be stored, so we provide data on best practices for several sample types. We then discuss design and analysis of positive and negative controls, which should always be run with experimental samples. We introduce a convenient set of non-biological DNA sequences that can be useful as positive controls for high-volume analysis. Careful analysis of negative and positive controls is particularly important in studies of samples with low microbial biomass, where contamination can comprise most or all of a sample. Lastly, we summarize approaches to enhancing experimental robustness by careful control of multiple comparisons and to comparing discovery and validation cohorts. We hope the experimental tactics summarized here will help researchers in this exciting field advance their studies efficiently while avoiding errors.

The 'fixed cost effect' on practice management.

PubMed

Tipton, E F; Finley, J B

1999-01-01

To obtain a better understanding of the behavior of "non-professional" costs in a medical practice, the authors analyzed the expenses of a 19-doctor practice. The analysis revealed that 80 percent of these expenses were fixed costs. Fixed costs, as opposed to variable costs, remain static in total but vary on a per unit basis as volume changes. Organizations with high fixed cost must maximize capacity to achieve profitability. Thus, the relationship among volume, capacity, cost and profit must be understood by medical practices negotiating rates for service units.

An overview of urban stormwater-management practices in Miami-Dade County, Florida

USGS Publications Warehouse

Chin, David A.

2004-01-01

Agencies with jurisdiction over stormwater-management systems in Miami-Dade County, Florida, include the Miami-Dade Department of Environmental Resources Management (DERM), South Florida Water Management District (SFWMD), and Florida Department of Transportation (FDOT). These agencies are primarily concerned with minor drainage systems that handle runoff from storms with return periods of 10 years or less (DERM), major drainage systems that handle runoff from storms with return periods of 25 years or more (SFWMD), and runoff from major roadways (FDOT). All drainage regulations require retention of at least a specified water-quality volume (defined volume of surface runoff), typically the first inch of runoff. The DERM and FDOT intensity duration frequency (IDF) curves used as a basis for design are similar but different, with differences particularly apparent for short-duration storms. The SFWMD 25-year 3-day storm incorporates an IDF curve that is substantially different from both the IDF curves of DERM and FDOT. A DERM methodology for designing closed exfiltration systems is applicable to storms of 1-hour duration, but is not applicable to all storms with a given T-year return period. A trench design that is applicable to all storms with a given T-year return period is presented as an alternative approach.

Review of Adult Learning and Literacy, Volume 4. Connecting Research, Policy, and Practice: A Project of the National Center for the Study of Adult Learning and Literacy

ERIC Educational Resources Information Center

Comings, John, Ed.; Garner, Barbara, Ed.; Smith, Cristine, Ed.

2004-01-01

"The Review of Adult Learning and Literacy: Connecting Research Policy, and Practice, Volume 4" is an addition to a series of annual publications of the National Center for the Study of Adult Learning and Literacy (NCSALL) that address major issues, the latest research, and the best practices in the field of adult literacy and learning.…

Small scale green infrastructure design to meet different urban hydrological criteria.

PubMed

Jia, Z; Tang, S; Luo, W; Li, S; Zhou, M

2016-04-15

As small scale green infrastructures, rain gardens have been widely advocated for urban stormwater management in the contemporary low impact development (LID) era. This paper presents a simple method that consists of hydrological models and the matching plots of nomographs to provide an informative and practical tool for rain garden sizing and hydrological evaluation. The proposed method considers design storms, infiltration rates and the runoff contribution area ratio of the rain garden, allowing users to size a rain garden for a specific site with hydrological reference and predict overflow of the rain garden under different storms. The nomographs provide a visual presentation on the sensitivity of different design parameters. Subsequent application of the proposed method to a case study conducted in a sub-humid region in China showed that, the method accurately predicted the design storms for the existing rain garden, the predicted overflows under large storm events were within 13-50% of the measured volumes. The results suggest that the nomographs approach is a practical tool for quick selection or assessment of design options that incorporate key hydrological parameters of rain gardens or other infiltration type green infrastructure. The graphic approach as displayed by the nomographs allow urban planners to demonstrate the hydrological effect of small scale green infrastructure and gain more support for promoting low impact development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Imparting Desired Attributes by Optimization in Structural Design

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw; Venter, Gerhard

2003-01-01

Commonly available optimization methods typically produce a single optimal design as a Constrained minimum of a particular objective function. However, in engineering design practice it is quite often important to explore as much of the design space as possible with respect to many attributes to find out what behaviors are possible and not possible within the initially adopted design concept. The paper shows that the very simple method of the sum of objectives is useful for such exploration. By geometrical argument it is demonstrated that if every weighting coefficient is allowed to change its magnitude and its sign then the method returns a set of designs that are all feasible, diverse in their attributes, and include the Pareto and non-Pareto solutions, at least for convex cases. Numerical examples in the paper include a case of an aircraft wing structural box with thousands of degrees of freedom and constraints, and over 100 design variables, whose attributes are structural mass, volume, displacement, and frequency. The method is inherently suitable for parallel, coarse-grained implementation that enables exploration of the design space in the elapsed time of a single structural optimization.

Spread spectrum communications. Volume 1, 2 & 3

NASA Technical Reports Server (NTRS)

Simon, M. K.; Levitt, B. K.; Omura, J. K.; Scholtz, R. A.

1985-01-01

The design and operation of spread-spectrum (SS) communication systems are examined in an introductory text intended for graduate engineering students and practicing engineers. Chapters are devoted to an overview of SS systems, the historical origins of SS, basic concepts and system models, antijam communication systems, pseudonoise generators, coherent direct-sequence systems, noncoherent frequency-hopped systems, coherent and differentially coherent modulation techniques, pseudonoise acquisition and tracking in direct-sequence receivers, time and frequency synchronization of frequency-hopped receivers, low-probability-of-intercept communication, and multiple-access communication. Graphs, diagrams, and photographs are provided.

Youth Attitude Tracking Study. Volume 1. Spring 1977.

DTIC Science & Technology

1977-08-01

such factors as pc.nmotional materials, re- cruiting practices, and advertising strategy . MARKET FACTS Page 4 Study Design The survey involved 16-21 year...cr a Oa: C; C;1 <.- £ K M C, Ui. 00 U- Cd 0 M US MARKET FACTS Page 118 4.6 Advertising Content Recall In past waves respondents1 ability to i-dentify... Advertising Not At All Meaningful Source: Q u. 7e L MARKET FACTS Page 1Z2 Advertising by all services was rated on the average between "Somewhat

Extravehicular Crewman Work System (ECWS) study program. Volume 3: Satellite service

NASA Technical Reports Server (NTRS)

Wilde, R. C.

1980-01-01

The satellite service portion of the Extravehicular Crewman Work System Study defines requirements and service equipment concepts for performing satellite service from the space shuttle orbiter. Both normal and contingency orbital satellite service is required. Service oriented satellite design practices are required to provide on orbit satellite service capability for the wide variety of satellites at the subsystem level. Development of additional satellite service equipment is required. The existing space transportation system provides a limited capability for performing satellite service tasks in the shuttle payload bay area.

Tracking data in the office environment.

PubMed

Erickson, Ty B

2010-09-01

Data tracking in the office setting focuses on a narrow spectrum of the entire patient safety arena; however, when properly executed, data tracking increases staff members' awareness of the importance of patient safety. Data tracking is also a high-volume event and thereby continues to loop back on the consciousness of providers in all aspects of their practice. Improvement in date tracking will improve the collateral areas of patient safety such as proper medication usage, legibility of written communication, effective delegation of patient safety initiatives, and a collegial effort at developing teams for safety design processes.

A model for prediction of STOVL ejector dynamics

NASA Technical Reports Server (NTRS)

Drummond, Colin K.

1989-01-01

A semi-empirical control-volume approach to ejector modeling for transient performance prediction is presented. This new approach is motivated by the need for a predictive real-time ejector sub-system simulation for Short Take-Off Verticle Landing (STOVL) integrated flight and propulsion controls design applications. Emphasis is placed on discussion of the approximate characterization of the mixing process central to thrust augmenting ejector operation. The proposed ejector model suggests transient flow predictions are possible with a model based on steady-flow data. A practical test case is presented to illustrate model calibration.

The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success. Volume One: Designing and Administering the Course

ERIC Educational Resources Information Center

Keup, Jennifer R.; Petschauer, Joni Webb

2011-01-01

"The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success," a five-volume series, is designed to assist educators who are interested in launching a first-year seminar or revamping an existing program. Each volume examines a different aspect of first-year seminar design or administration and…

Spacecraft Habitable Volume: Results of an Interdisciplinary Workshop

NASA Technical Reports Server (NTRS)

Fitts, David J.; Connolly, Janis; Howard, Robert

2011-01-01

NASA's Human Exploration Framework Team posed the question: "Is 80 cubic meters per person of habitable volume acceptable for a proposed Deep Space Habitat?" The goal of the workshop was to address the "net habitable volume" necessary for long-duration human spaceflight missions and identify design and psychological issues and mitigations. The objectives were: (1) Identify psychological factors -- i.e., "stressors" -- that impact volume and layout specifications for long duration missions (2) Identify mitigation strategies for stressors, especially those that can be written as volume design specifications (3) Identify a forward research roadmap -- i.e., what future work is needed to define and validate objective design metrics? (4) Provide advisories on the human factors consequences of poor net habitable volume allocation and layout design.

Safe Sleep Practices of Kansas Birthing Hospitals

PubMed Central

Ahlers-Schmidt, Carolyn R.; Schunn, Christy; Sage, Cherie; Engel, Matthew; Benton, Mary

2018-01-01

Background Sleep-related death is tied with congenital anomalies as the leading cause of infant mortality in Kansas, and external risk factors are present in 83% of these deaths. Hospitals can impact caregiver intentions to follow risk-reduction strategies. This project assessed the current practices and policies of Kansas hospitals with regard to safe sleep. Methods A cross-sectional survey of existing safe sleep practices and policies in Kansas hospitals was performed. Hospitals were categorized based on reported delivery volume and data were compared across hospital sizes. Results Thirty-one of 73 (42%) contacted hospitals responded. Individual survey respondents represented various hospital departments including newborn/well-baby (68%), neonatal intensive care unit (3%) and other non-nursery departments or administration (29%). Fifty-eight percent of respondents reported staff were trained on infant safe sleep; 44% of these held trainings annually. High volume hospitals tended to have more annual training than low or mid volume birth hospitals. Thirty-nine percent reported a safe sleep policy, though most of these (67%) reported never auditing compliance. The top barrier to safe sleep education, regardless of delivery volume, was conflicting patient and family member beliefs. Conclusions Hospital promotion of infant safe sleep is being conducted in Kansas to varying degrees. High and mid volume birth hospitals may need to work more on formal auditing of safe sleep practices, while low volume hospitals may need more staff training. Low volume hospitals also may benefit from access to additional caregiver education materials. Finally, it is important to note hospitals should not be solely responsible for safe sleep education. PMID:29844848

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of productionmore » builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.« less

A nutrition and conditioning intervention for natural bodybuilding contest preparation: observations and suggestions.

PubMed

Gentil, Paulo

2015-01-01

Bodybuilding is full of myths and practices that are contrary to the scientific literature, which can lead to health problems. Adopting a scientifically designed approach is very important, as it may help bodybuilders to achieve better results while preserving their health. However, I have some criticism regarding some practices adopted in the referred article as ad libitum ingestion of sugar-free cordial and flavored tea and the performance of the exercise in fasted state, as it seems to bring no benefit and have some potential problems. Some suggestion are made in order to preserve FFM, like changing training split and exercise selection; increasing carbohydrate ingestion and decreasing protein intake; changing the resistance training stimuli and reducing the volume of aerobic exercises and increase its intensity.

Guidelines and Capabilities for Designing Human Missions

NASA Technical Reports Server (NTRS)

2002-01-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Guidelines and Capabilities for Designing Human Missions

NASA Astrophysics Data System (ADS)

2002-03-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Field research on the spectral properties of crops and soils, volume 1. [Purdue Agronomy Farm

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Biehl, L. L.; Robinson, B. F.

1980-01-01

The experiment design, data acquisition and preprocessing, data base management, analysis results and development of instrumentation for the AgRISTARS Supporting Research Project, Field Research task are described. Results of several investigations on the spectral reflectance of corn and soybean canopies as influenced by cultural practices, development stage and nitrogen nutrition are reported as well as results of analyses of the spectral properties of crop canopies as a function of canopy geometry, row orientation, sensor view angle and solar illumination angle are presented. The objectives, experiment designs and data acquired in 1980 for field research experiments are described. The development and performance characteristics of a prototype multiband radiometer, data logger, and aerial tower for field research are discussed.

Design and manufacture of wheels for a dual-mode (manned - automatic) lunar surface roving vehicle. Volume 2: Proposed test plan

NASA Technical Reports Server (NTRS)

1970-01-01

A developmental test plan for the wheel and wheel drive assembly of the dual-mode (manned/automated) lunar surface roving vehicle is presented. The tests cover performance, as well as critical environmental characteristics. Insofar as practical, the environmental conditions imposed will be in the sequence expected during the hardware's life from storage through the lunar mission. Test procedures are described for static load deflection and endurance tests. Soft soil tests to determine mobility characteristics including drawbar-pull and thrust vs slip, and motion resistance for various wheel loads are also discussed. Test designs for both ambient and thermal vacuum conditions are described. Facility, transducer, and instrumentation requirements are outlined.

Medical review practices for driver licensing volume 2: case studies of medical referrals and licensing outcomes in Maine, Ohio, Oregon, Texas, Washington, and Wisconsin.

DOT National Transportation Integrated Search

2017-03-01

This is the second of three reports examining driver medical review practices in the United States and how : they fulfill the basic functions of identifying, assessing, and rendering licensing decisions on medically at-risk : drivers. This volume pre...

User's Guide: Innovation Configurations for NSDC's Standards for Staff Development

ERIC Educational Resources Information Center

Roy, Patricia

2007-01-01

This 75-page guidebook is a companion to "Moving NSDC's Staff Development Standards into Practice: Innovation Configurations" Volumes I (ED522734) and II (ED522581). Innovation Configurations are a tool that helps educators better understand what the standards look like in practice. Roy, who co-authored the original volumes, introduces a process…

Mathematics: A Practical View. Volume I, Teacher Edition. Applied Basic Curriculum Series.

ERIC Educational Resources Information Center

Evaluation, Dissemination and Assessment Center, Dallas.

The activities in this volume of practical mathematics are intended for the intermediate grades. The manual contains three components which can be structured in different combinations according to different student needs. Built around a review of selected objectives in the mathematics basic curriculum, the material is intended to stimulate…

Design Recommendations for Concrete Tunnel Linings : Volume I. Results of Model Tests and Analytical Parameter Studies.

DOT National Transportation Integrated Search

1983-11-01

Volume 1 of this report describes model tests and analytical studies based on experience, interviews with design engineers, and literature reviews, carried out to develop design recommendations for concrete tunnel linings. Volume 2 contains the propo...

Winged cargo return vehicle. Volume 1: Conceptual design

NASA Technical Reports Server (NTRS)

1990-01-01

The Advanced Design Project (ADP) allows an opportunity for students to work in conjunction with NASA and other aerospace companies on NASA Advanced Design Projects. The following volumes represent the design report: Volume 1 Conceptual Design; Volume 2 Wind Tunnel Tests; Volume 3 Structural Analysis; and Volume 4 Water Tunnel Tests. The project chosen by the University of Minnesota in conjunction with NASA Marshall Space Flight Center for this year is a Cargo Return Vehicle (CRV) to support the Space Station Freedom. The vehicle is the third generation of vehicles to be built by NASA, the first two being the Apollo program, and the Space Shuttle program. The CRV is to work in conjunction with a personnel launch system (PLS) to further subdivide and specialize the vehicles that NASA will operate in the year 2000. The cargo return vehicle will carry payload to and from the Space Station Freedom (SSF).

Water quality management library. 2. edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckenfelder, W.W.; Malina, J.F.; Patterson, J.W.

1998-12-31

A series of ten books offered in conjunction with Water Quality International, the Biennial Conference and Exposition of the International Association on Water Pollution Research and Control (IAWPRC). Volume 1, Activated Sludge Process, Design and Control, 2nd edition, 1998: Volume 2, Upgrading Wastewater Treatment Plants, 2nd edition, 1998: Volume 3, Toxicity Reduction, 2nd edition, 1998: Volume 4, Municipal Sewage Sludge Management, 2nd edition, 1998: Volume 5, Design and Retrofit of Wastewater Treatment Plants for Biological Nutrient Removal, 1st edition, 1992: Volume 6, Dynamics and Control of the Activated Sludge Process, 2nd edition, 1998: Volume 7: Design of Anaerobic Processes formore » the Treatment of Industrial and Municipal Wastes, 1st edition, 1992: Volume 8, Groundwater Remediation, 1st edition, 1992: Volume 9, Nonpoint Pollution and Urban Stormwater Management, 1st edition, 1995: Volume 10, Wastewater Reclamation and Reuse, 1st edition, 1998.« less

Dynamic effect of leachate recirculation on batch mode solid state anaerobic digestion: Influence of recirculated volume, leachate to substrate ratio and recirculation periodicity.

PubMed

Degueurce, Axelle; Trémier, Anne; Peu, Pascal

2016-09-01

Performances of batch mode solid state anaerobic digestion (SSAD) were investigated through several leachate recirculation strategies. Three parameters were shown to particularly influence methane production rates (MPR) and methane yields: the length of the interval between two recirculation events, the leachate to substrate (L:S) ratio and the volume of leachate recirculated. A central composite factor design was used to determine the influence of each parameter on methane production. Results showed that lengthening the interval between two recirculation events reduced methane yield. This effect can be counteracted by recirculating a large volume of leachate at a low L:S ratio. Steady methane production can be obtained by recirculating small amounts of leachate, and by lengthening the interval between two recirculations, regardless of the L:S ratio. However, several combinations of these parameters led to similar performances meaning that leachate recirculation practices can be modified as required by the specific constraints SSAD plants configurations. Copyright © 2016 Elsevier Ltd. All rights reserved.

A CAD System for Hemorrhagic Stroke.

PubMed

Nowinski, Wieslaw L; Qian, Guoyu; Hanley, Daniel F

2014-09-01

Computer-aided detection/diagnosis (CAD) is a key component of routine clinical practice, increasingly used for detection, interpretation, quantification and decision support. Despite a critical need, there is no clinically accepted CAD system for stroke yet. Here we introduce a CAD system for hemorrhagic stroke. This CAD system segments, quantifies, and displays hematoma in 2D/3D, and supports evacuation of hemorrhage by thrombolytic treatment monitoring progression and quantifying clot removal. It supports seven-step workflow: select patient, add a new study, process patient's scans, show segmentation results, plot hematoma volumes, show 3D synchronized time series hematomas, and generate report. The system architecture contains four components: library, tools, application with user interface, and hematoma segmentation algorithm. The tools include a contour editor, 3D surface modeler, 3D volume measure, histogramming, hematoma volume plot, and 3D synchronized time-series hematoma display. The CAD system has been designed and implemented in C++. It has also been employed in the CLEAR and MISTIE phase-III, multicenter clinical trials. This stroke CAD system is potentially useful in research and clinical applications, particularly for clinical trials.

Automated processing of whole blood samples into microliter aliquots of plasma.

PubMed

Burtis, C A; Johnson, W W; Walker, W A

1988-01-01

A rotor that accepts and automatically processes a bulk aliquot of a single blood sample into multiple aliquots of plasma has been designed and built. The rotor consists of a central processing unit, which includes a disk containing eight precision-bore capillaries. By varying the internal diameters of the capillaries, aliquot volumes ranging 1 to 10 mul can be prepared. In practice, an unmeasured volume of blood is placed in a centre well, and, as the rotor begins to spin, is moved radially into a central annular ring where it is distributed into a series of processing chambers. The rotor is then spun at 3000 rpm for 10 min. When the centrifugal field is removed by slowly decreasing the rotor speed, an aliquot of plasma is withdrawn by capillary action into each of the capillary tubes. The disk containing the eight measured aliquots of plasma is subsequently removed and placed in a modifed rotor for conventional centrifugal analysis. Initial evaluation of the new rotor indicates that it is capable of producing discrete, microliter volumes of plasma with a degree of accuracy and precision approaching that of mechanical pipettes.

Investigation of the Capture of Magnetic Particles From High-Viscosity Fluids Using Permanent Magnets.

PubMed

Garraud, Alexandra; Velez, Camilo; Shah, Yash; Garraud, Nicolas; Kozissnik, Bettina; Yarmola, Elena G; Allen, Kyle D; Dobson, Jon; Arnold, David P

2016-02-01

This paper investigates the practicality of using a small, permanent magnet to capture magnetic particles out of high-viscosity biological fluids, such as synovial fluid. Numerical simulations are used to predict the trajectory of magnetic particles toward the permanent magnet. The simulations are used to determine a "collection volume" with a time-dependent size and shape, which determines the number of particles that can be captured from the fluid in a given amount of time. The viscosity of the fluid strongly influences the velocity of the magnetic particles toward the magnet, hence, the collection volume after a given time. In regards to the design of the magnet, the overall size is shown to most strongly influence the collection volume in comparison to the magnet shape or aspect ratio. Numerical results showed good agreement with in vitro experimental magnetic collection results. In the long term, this paper aims to facilitate optimization of the collection of magnetic particle-biomarker conjugates from high-viscosity biological fluids without the need to remove the fluid from a patient.

Development of Probabilistic Rigid Pavement Design Methodologies for Military Airfields.

DTIC Science & Technology

1983-12-01

4A161102AT22, Task AO, Work Unit 009, "Methodology for Considering Material Variability in Pavement Design." OCE Project Monitor was Mr. S. S. Gillespie. The...PREFACE. .. ............................. VOLUME 1: STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS VOLUME 11: MATHEMATICAL FORMULATION OF...VOLUME IV: PROBABILISTIC ANALYSIS OF RIGID AIRFIELD DESIGN BY ELASTIC LAYERED THEORY VOLUME I STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS

The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success: Volume Two: Instructor Training and Development

ERIC Educational Resources Information Center

Groccia, James; Hunter, Mary Stuart

2012-01-01

"The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success," a five-volume series, is designed to assist educators who are interested in launching a firstyear seminar or revamping an existing program. Each volume examines a different aspect of first-year seminar design or…

The design, development, and test of balloonborne and groundbased lidar systems. Volume 1: Balloonborne coherent CO2 lidar system

NASA Astrophysics Data System (ADS)

Shepherd, O.; Aurilio, G.; Bucknam, R. D.; Hurd, A. G.; Rappaport, S. A.

1991-06-01

This is Volume 1 of a three volume final report on the design, development, and test of balloonborne and groundbased lidar systems. Volume 2 describes the flight test of Atmospheric Balloonborne Lidar Experiment, ABLE 2, which successfully made atmospheric density backscatter measurements during a flight over White Sands Missile Range. Volume 3 describes groundbased lidar development and measurements, including the design of a telescope dome lidar installation, the design of a transportable lidar shed for remote field sites, and field measurements of atmospheric and cloud backscatter from Ascension Island during SABLE 89 and Terciera, Azores during GABLE 90. In this volume, Volume 1, the design and fabrication of a balloonborne CO2 coherent lidar payload are described. The purpose of this payload is to measure, from altitudes greater than 20 km, the 10.6 micrometers backscatter from atmospheric aerosols as a function of altitude. Minor modifications to the lidar would provide for aerosol velocity measurements to be made. The lidar and payload system design was completed, and major components were fabricated and assembled. These tasks have been successfully completed, and recommendations for further lidar measurements and data analysis have been made.

Variability in Accreditation Council for Graduate Medical Education Resident Case Log System practices among orthopaedic surgery residents.

PubMed

Salazar, Dane; Schiff, Adam; Mitchell, Erika; Hopkinson, William

2014-02-05

The Accreditation Council for Graduate Medical Education (ACGME) Resident Case Log System is designed to be a reflection of residents' operative volume and an objective measure of their surgical experience. All operative procedures and manipulations in the operating room, Emergency Department, and outpatient clinic are to be logged into the Resident Case Log System. Discrepancies in the log volumes between residents and residency programs often prompt scrutiny. However, it remains unclear if such disparities truly represent differences in operative experiences or if they are reflections of inconsistent logging practices. The purpose of this study was to investigate individual recording practices among orthopaedic surgery residents prior to August 1, 2011. Orthopaedic surgery residents received a questionnaire on case log practices that was distributed through the Council of Orthopaedic Residency Directors list server. Respondents were asked to respond anonymously about recording practices in different clinical settings as well as types of cases routinely logged. Hypothetical scenarios of common orthopaedic procedures were presented to investigate the differences in the Current Procedural Terminology codes utilized. Two hundred and ninety-eight orthopaedic surgery residents completed the questionnaire; 37% were fifth-year residents, 22% were fourth-year residents, 18% were third-year residents, 15% were second-year residents, and 8% were first-year residents. Fifty-six percent of respondents reported routinely logging procedures performed in the Emergency Department or urgent care setting. Twenty-two percent of participants routinely logged procedures in the clinic or outpatient setting, 20% logged joint injections, and only 13% logged casts or splints applied in the office setting. There was substantial variability in the Current Procedural Terminology codes selected for the seven clinical scenarios. There has been a lack of standardization in case-logging practices among orthopaedic surgery residents prior to August 1, 2011. ACGME case log data prior to this date may not be a reliable measure of residents' procedural experience.

Development of Parametric Mass and Volume Models for an Aerospace SOFC/Gas Turbine Hybrid System

NASA Technical Reports Server (NTRS)

Tornabene, Robert; Wang, Xiao-yen; Steffen, Christopher J., Jr.; Freeh, Joshua E.

2005-01-01

In aerospace power systems, mass and volume are key considerations to produce a viable design. The utilization of fuel cells is being studied for a commercial aircraft electrical power unit. Based on preliminary analyses, a SOFC/gas turbine system may be a potential solution. This paper describes the parametric mass and volume models that are used to assess an aerospace hybrid system design. The design tool utilizes input from the thermodynamic system model and produces component sizing, performance, and mass estimates. The software is designed such that the thermodynamic model is linked to the mass and volume model to provide immediate feedback during the design process. It allows for automating an optimization process that accounts for mass and volume in its figure of merit. Each component in the system is modeled with a combination of theoretical and empirical approaches. A description of the assumptions and design analyses is presented.

The association between hospital volume and processes, outcomes, and costs of care for congestive heart failure

PubMed Central

Joynt, Karen E.; Orav, E. John; Jha, Ashish K.

2012-01-01

Background Congestive Heart Failure (CHF) is common and costly, and despite pharmacologic and technical advances, outcomes remain suboptimal. Objective To examine whether hospitals that have more experience caring for patients with CHF provide better, more efficient care. Design We used national Medicare claims data from 2006–2007 to examine the relationship between hospitals’ case volume and quality, outcomes, and costs for patients with CHF. Setting 4,095 U.S. hospitals Patients Medicare fee-for-service patients with a primary discharge diagnosis of CHF Measurements Hospital Quality Alliance (HQA) CHF process measures, 30-day risk-adjusted mortality rates, 30-day risk-adjusted readmission rates, and costs per discharge. Results Hospitals in the lowest volume group had lower performance on HQA measures than medium- or high-volume hospitals (80.2% versus 87.0% versus 89.1%, p<0.001). Within the low volume group, being admitted to a hospital with a higher case volume was associated with lower mortality, lower readmission, and higher costs. For example, in the lowest volume group of hospitals, an increase of 10 cases of CHF was associated with 1% lower odds of mortality, 1% lower odds of readmissions and $22 higher costs per case. We found similar though smaller relationships between case volume and both mortality and costs in the medium and high-volume hospital cohorts. Limitations Our analysis was limited to Medicare patients 65 years of age or older; risk adjustment was performed using administrative data. Conclusions Experience with managing CHF, as measured by an institution’s volume, is associated with higher quality of care and better outcomes for patients, but at a higher cost. Understanding which practices employed by high-volume institutions account for these advantages can help improve quality of care and clinical outcomes for all CHF patients. PMID:21242366

Implementing Educational Language Policy in Arizona: Legal, Historical and Current Practices in SEI

ERIC Educational Resources Information Center

Arias, M. Beatriz, Ed.; Faltis, Christian, Ed.

2012-01-01

This volume is a unique contribution to the study of language policy and education for English Learners because it focuses on the decade long implementation of "English Only" in Arizona. How this policy influences teacher preparation and classroom practice is the central topic of this volume. Scholars and researchers present their latest…

The Health Services Mobility Study Method of Task Analysis and Curriculum Design. Research Report No. 11. Volume 3: Using the Computer to Develop Job Ladders.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

This document is volume 3 of a four-volume report which describes the components of the Health Services Mobility Study (HSMS) method of task analysis, job ladder design, and curriculum development. Divided into four chapters, volume 3 is a manual for using HSMS computer based statistical procedures to design job structures and job ladders. Chapter…

Pore size engineering applied to starved electrochemical cells and batteries

NASA Technical Reports Server (NTRS)

Abbey, K. M.; Thaller, L. H.

1982-01-01

To maximize performance in starved, multiplate cells, the cell design should rely on techniques which widen the volume tolerance characteristics. These involve engineering capillary pressure differences between the components of an electrochemical cell and using these forces to promote redistribution of electrolyte to the desired optimum values. This can be implemented in practice by prescribing pore size distributions for porous back-up plates, reservoirs, and electrodes. In addition, electrolyte volume management can be controlled by incorporating different pore size distributions into the separator. In a nickel/hydrogen cell, the separator must contain pores similar in size to the small pores of both the nickel and hydrogen electrodes in order to maintain an optimum conductive path for the electrolyte. The pore size distributions of all components should overlap in such a way as to prevent drying of the separator and/or flooding of the hydrogen electrode.

A small mode volume tunable microcavity: Development and characterization

NASA Astrophysics Data System (ADS)

Greuter, Lukas; Starosielec, Sebastian; Najer, Daniel; Ludwig, Arne; Duempelmann, Luc; Rohner, Dominik; Warburton, Richard J.

2014-09-01

We report the realization of a spatially and spectrally tunable air-gap Fabry-Pérot type microcavity of high finesse and cubic-wavelength-scale mode volume. These properties are attractive in the fields of opto-mechanics, quantum sensing, and foremost cavity quantum electrodynamics. The major design feature is a miniaturized concave mirror with atomically smooth surface and radius of curvature as low as 10 μm produced by CO2 laser ablation of fused silica. We demonstrate excellent mode-matching of a focussed laser beam to the microcavity mode and confirm from the frequencies of the resonator modes that the effective optical radius matches the physical radius. With these small radii, we demonstrate wavelength-size beam waists. We also show that the microcavity is sufficiently rigid for practical applications: in a cryostat at 4 K, the root-mean-square microcavity length fluctuations are below 5 pm.

Direct filtration for recovery of Schistosoma mansoni cercariae in the field.

PubMed

Sandt, D G

1973-01-01

The recovery of schistosome cercariae from natural waters has been limited by variations in turbidity and in the accuracy of recovery with different techniques. A modification of the Rowan vacuum paper filtration method employing a battery-operated pumping system, a glass-silicone plate filter, and a specially designed filter holder is described and evaluated. Field tests on St Lucia indicate a mean filtration volume of 12.2 litres per filter at a mean turbidity of 20.3 Jackson turbidity units. Overall, 86% of the volumes filtered per filter were in excess of 6 litres. Particle size, rather than turbidity, was found to be the main factor influencing filter blockage, reading time, and accuracy. Recoveries of 0.01 cercaria (Schistosoma mansoni) per litre sampled were obtained, but the practical limit of the method is considered to be closer to 0.1 cercaria per litre sampled.

High Volume Manufacturing and Field Stability of MEMS Products

NASA Astrophysics Data System (ADS)

Martin, Jack

Low volume MEMS/NEMS production is practical when an attractive concept is implemented with business, manufacturing, packaging, and test support. Moving beyond this to high volume production adds requirements on design, process control, quality, product stability, market size, market maturity, capital investment, and business systems. In a broad sense, this chapter uses a case study approach: It describes and compares the silicon-based MEMS accelerometers, pressure sensors, image projection systems, and gyroscopes that are in high volume production. Although they serve several markets, these businesses have common characteristics. For example, the manufacturing lines use automated semiconductor equipment and standard material sets to make consistent products in large quantities. Standard, well controlled processes are sometimes modified for a MEMS product. However, novel processes that cannot run with standard equipment and material sets are avoided when possible. This reliance on semiconductor tools, as well as the organizational practices required to manufacture clean, particle-free products partially explains why the MEMS market leaders are integrated circuit manufacturers. There are other factors. MEMS and NEMS are enabling technologies, so it can take several years for high volume applications to develop. Indeed, market size is usually a strong function of price. This becomes a vicious circle, because low price requires low cost - a result that is normally achieved only after a product is in high volume production. During the early years, IC companies reduced cost and financial risk by using existing facilities for low volume MEMS production. As a result, product architectures are partially determined by capabilities developed for previous products. This chapter includes a discussion of MEMS product architecture with particular attention to the impact of electronic integration, packaging, and surfaces. Packaging and testing are critical, because they are significant factors in MEMS product cost. These devices have extremelyhigh surface/volume ratios, so performance and stability may depend on the control of surface characteristics after packaging. Looking into the future, the competitive advantage of IC suppliers will decrease as small companies learn to integrate MEMS/NEMS devices on CMOS foundry wafers. Packaging challenges still remain, because most MEMS/NEMS products must interact with the environment without degrading stability or reliability. Generic packaging solutions are unlikely. However, packaging subcontractors recognize that MEMS/NEMS is a growth opportunity. They will spread the overhead burden of high-capital-cost-facilities by developing flexible processes in order to package several types of moderate volume integrated MEMS/NEMS products on the same equipment.

High Volume Manufacturing and Field Stability of MEMS Products

NASA Astrophysics Data System (ADS)

Martin, Jack

Low volume MEMS/NEMS production is practical when an attractive concept is implemented with business, manufacturing, packaging, and test support. Moving beyond this to high volume production adds requirements on design, process control, quality, product stability, market size, market maturity, capital investment, and business systems. In a broad sense, this chapter uses a case study approach: It describes and compares the silicon-based MEMS accelerometers, pressure sensors, image projection systems, and gyroscopes that are in high volume production. Although they serve several markets, these businesses have common characteristics. For example, the manufacturing lines use automated semiconductor equipment and standard material sets to make consistent products in large quantities. Standard, well controlled processes are sometimes modified for a MEMS product. However, novel processes that cannot run with standard equipment and material sets are avoided when possible. This reliance on semiconductor tools, as well as the organizational practices required to manufacture clean, particle-free products partially explains why the MEMS market leaders are integrated circuit manufacturers. There are other factors. MEMS and NEMS are enabling technologies, so it can take several years for high volume applications to develop. Indeed, market size is usually a strong function of price. This becomes a vicious circle, because low price requires low cost - a result that is normally achieved only after a product is in high volume production. During the early years, IC companies reduced cost and financial risk by using existing facilities for low volume MEMS production. As a result, product architectures are partially determined by capabilities developed for previous products. This chapter includes a discussion of MEMS product architecture with particular attention to the impact of electronic integration, packaging, and surfaces. Packaging and testing are critical, because they are significant factors in MEMS product cost. These devices have extremely high surface/volume ratios, so performance and stability may depend on the control of surface characteristics after packaging. Looking into the future, the competitive advantage of IC suppliers will decrease as small companies learn to integrate MEMS/NEMS devices on CMOS foundry wafers. Packaging challenges still remain, because most MEMS/NEMS products must interact with the environment without degrading stability or reliability. Generic packaging solutions are unlikely. However, packaging subcontractors recognize that MEMS/NEMS is a growth opportunity. They will spread the overhead burden of high-capital-cost-facilities by developing flexible processes in order to package several types of moderate volume integrated MEMS/NEMS products on the same equipment.

Mod-5A wind turbine generator program design report. Volume 2: Conceptual and preliminary design, book 2

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind tunnel generator is documented. There are four volumes. In Volume 2, book 2 the requirements and criteria for the design are presented. The development tests, which determined or characterized many of the materials and components of the wind turbine generator, are described.

The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success: Volume Three: Teaching in the First-Year Seminar

ERIC Educational Resources Information Center

Garner, Brad

2012-01-01

"The First-Year Seminar: Designing, Implementing, and Assessing Courses to Support Student Learning and Success," a five-volume series, is designed to assist educators who are interested in launching a first-year seminar or revamping an existing program. Each volume examines a different aspect of first-year seminar design or…

Geometry modeling and grid generation using 3D NURBS control volume

NASA Technical Reports Server (NTRS)

Yu, Tzu-Yi; Soni, Bharat K.; Shih, Ming-Hsin

1995-01-01

The algorithms for volume grid generation using NURBS geometric representation are presented. The parameterization algorithm is enhanced to yield a desired physical distribution on the curve, surface and volume. This approach bridges the gap between CAD surface/volume definition and surface/volume grid generation. Computational examples associated with practical configurations have shown the utilization of these algorithms.

Design Criteria for Microbiological Facilities at Fort Detrick. Volume I: Introduction.

ERIC Educational Resources Information Center

Army Biological Labs., Fort Detrick, MD. Industrial Health and Safety Div.

Volume I of a two volume manual serves as an introduction to design criteria for microbiological facilities. It is addressed to management personnel responsible for planning, budgeting, and making policy decisions for construction or remodeling of microbiological research laboratories. This volume is also concerned with--(1) microbiological safety…

National Trends in Prostate Biopsy and Radical Prostatectomy Volumes Following the US Preventive Services Task Force Guidelines Against Prostate-Specific Antigen Screening.

PubMed

Halpern, Joshua A; Shoag, Jonathan E; Artis, Amanda S; Ballman, Karla V; Sedrakyan, Art; Hershman, Dawn L; Wright, Jason D; Shih, Ya Chen Tina; Hu, Jim C

2017-02-01

Studies demonstrate that use of prostate-specific antigen screening decreased significantly following the US Preventive Services Task Force (USPSTF) recommendation against prostate-specific antigen screening in 2012. To determine downstream effects on practice patterns in prostate cancer diagnosis and treatment following the 2012 USPSTF recommendation. Procedural volumes of certifying and recertifying urologists from 2009 through 2016 were evaluated for variation in prostate biopsy and radical prostatectomy (RP) volume. Trends were confirmed using the New York Statewide Planning and Research Cooperative System and Nationwide Inpatient Sample. The study included a representative sample of urologists across practice settings and nationally representative sample of all RP discharges. We obtained operative case logs from the American Board of Urology and identified urologists performing at least 1 prostate biopsy (n = 5173) or RP (n = 3748), respectively. The 2012 USPSTF recommendation against routine population-wide prostate-specific antigen screening. Change in median biopsy and RP volume per urologist and national procedural volume. Following the USPSTF recommendation, median biopsy volume per urologist decreased from 29 to 21 (interquartile range [IQR}, 12-34; P < .001). After adjusting for physician and practice characteristics, biopsy volume decreased by 28.7% following 2012 (parameter estimate, -0.25; SE, 0.03; P < .001). Similarly, following the USPSTF recommendation, median RP volume per urologist decreased from 7 (IQR, 3-15) to 6 (IQR, 2-12) (P < .001), and in adjusted analyses, RP volume decreased 16.2% (parameter estimate, -0.15; SE, 0.05; P = .003). Following the 2012 USPSTF recommendation, prostate biopsy and RP volumes decreased significantly. A panoramic vantage point is needed to evaluate the long-term consequences of the 2012 USPSTF recommendation.

Adaptation of Combustion Principles to Aircraft Propulsion. Volume I; Basic Considerations in the Combustion of Hydrocarbon Fuels with Air

NASA Technical Reports Server (NTRS)

Barnett, Henry C (Editor); Hibbard, Robert R (Editor)

1955-01-01

The report summarizes source material on combustion for flight-propulsion engineers. First, several chapters review fundamental processes such as fuel-air mixture preparation, gas flow and mixing, flammability and ignition, flame propagation in both homogenous and heterogenous media, flame stabilization, combustion oscillations, and smoke and carbon formation. The practical significance and the relation of these processes to theory are presented. A second series of chapters describes the observed performance and design problems of engine combustors of the principal types. An attempt is made to interpret performance in terms of the fundamental processes and theories previously reviewed. Third, the design of high-speed combustion systems is discussed. Combustor design principles that can be established from basic considerations and from experience with actual combustors are described. Finally, future requirements for aircraft engine combustion systems are examined.

A passively controlled appendage deployment system for the San Marco D/L spacecraft

NASA Technical Reports Server (NTRS)

Lang, W. E.; Frisch, H. P.; Schwartz, D. A.

1984-01-01

The analytical simulation of deployment dynamics of these two axis concepts as well as the evolution of practical designs for the add on deployable inertia boom units is described. With the boom free to swing back in response to Coriolis forces as well as outwards in response to centrifugal forces, the kinematics of motion are complex but admit the possibility of absorbing deployment energy in frictional or other damping devices about the radial axis, where large amplitude motions can occur and where the design envelope allows more available volume. An acceptable range is defined for frictional damping for any given spin rate. Inadequate damping allows boom motions which strike the spacecraft; excessive damping causes the boom to swing out and latch with damaging violence. The acceptable range is a design parameter and must accommodate spin rate tolerance and also the tolerance and repeatability of the damping mechanisms.

Robustness of an artificially tailored fisheye imaging system with a curvilinear image surface

NASA Astrophysics Data System (ADS)

Lee, Gil Ju; Nam, Won Il; Song, Young Min

2017-11-01

Curved image sensors inspired by animal and insect eyes have provided a new development direction in next-generation digital cameras. It is known that natural fish eyes afford an extremely wide field of view (FOV) imaging due to the geometrical properties of the spherical lens and hemispherical retina. However, its inherent drawbacks, such as the low off-axis illumination and the fabrication difficulty of a 'dome-like' hemispherical imager, limit the development of bio-inspired wide FOV cameras. Here, a new type of fisheye imaging system is introduced that has simple lens configurations with a curvilinear image surface, while maintaining high off-axis illumination and a wide FOV. Moreover, through comparisons with commercial conventional fisheye designs, it is determined that the volume and required number of optical elements of the proposed design is practical while capturing the fundamental optical performances. Detailed design guidelines for tailoring the proposed optic system are also discussed.

Modular minimally invasive extracorporeal circulation systems; can they become the standard practice for performing cardiac surgery?

PubMed

Anastasiadis, K; Antonitsis, P; Argiriadou, H; Deliopoulos, A; Grosomanidis, V; Tossios, P

2015-04-01

Minimally invasive extracorporeal circulation (MiECC) has been developed in an attempt to integrate all advances in cardiopulmonary bypass technology in one closed circuit that shows improved biocompatibility and minimizes the systemic detrimental effects of CPB. Despite well-evidenced clinical advantages, penetration of MiECC technology into clinical practice is hampered by concerns raised by perfusionists and surgeons regarding air handling together with blood and volume management during CPB. We designed a modular MiECC circuit, bearing an accessory circuit for immediate transition to an open system that can be used in every adult cardiac surgical procedure, offering enhanced safety features. We challenged this modular circuit in a series of 50 consecutive patients. Our results showed that the modular AHEPA circuit design offers 100% technical success rate in a cohort of random, high-risk patients who underwent complex procedures, including reoperation and valve and aortic surgery, together with emergency cases. This pilot study applies to the real world and prompts for further evaluation of modular MiECC systems through multicentre trials. © The Author(s) 2015.

Efficacy of radiation safety glasses in interventional radiology.

PubMed

van Rooijen, Bart D; de Haan, Michiel W; Das, Marco; Arnoldussen, Carsten W K P; de Graaf, R; van Zwam, Wim H; Backes, Walter H; Jeukens, Cécile R L P N

2014-10-01

This study was designed to evaluate the reduction of the eye lens dose when wearing protective eyewear in interventional radiology and to identify conditions that optimize the efficacy of radiation safety glasses. The dose reduction provided by different models of radiation safety glasses was measured on an anthropomorphic phantom head. The influence of the orientation of the phantom head on the dose reduction was studied in detail. The dose reduction in interventional radiological practice was assessed by dose measurements on radiologists wearing either leaded or no glasses or using a ceiling suspended screen. The different models of radiation safety glasses provided a dose reduction in the range of a factor of 7.9-10.0 for frontal exposure of the phantom. The dose reduction was strongly reduced when the head is turned to the side relative to the irradiated volume. The eye closest to the tube was better protected due to side shielding and eyewear curvature. In clinical practice, the mean dose reduction was a factor of 2.1. Using a ceiling suspended lead glass shield resulted in a mean dose reduction of a factor of 5.7. The efficacy of radiation protection glasses depends on the orientation of the operator's head relative to the irradiated volume. Glasses can offer good protection to the eye under clinically relevant conditions. However, the performance in clinical practice in our study was lower than expected. This is likely related to nonoptimized room geometry and training of the staff as well as measurement methodology.

A Mini Review of Using the Oralift Appliance and a Pilot Study to See if 3D Imaging Techniques Could Improve Outcomes

PubMed Central

Mohindra, N. K.

2018-01-01

Background: Occlusal appliances of various designs have been described in the literature. They usually have to be worn for substantial periods including night time to have the desired effect for which they are designed. The Oralift® appliance has been designed to address the signs of facial ageing and to help stop parafunctional habits. The appliance is based on the principles of the pivot appliance and is worn for very short periods, never at night and not even every day. The maximum usage recommended is two hours every third day. Objective: This is a review of five patients who have been treated with Oralift® with the aim of assessing whether the visual changes seen by wearing the appliance can be quantified by changes in volume as measured by 3D Imaging, and if this quantification could be useful in improving the outcomes for each patient. Methods: The patients were fitted with the appliances in general practice, and 2D images were taken before, during and after treatment. Afterwards, the patient attended King’s College London, to have 3D imaging. Results: 3D imaging has been proved far superior to standardized 2D photography in assessing the changes taking place on the face, and helped quantify the volume changes. Conclusion: To further improve the outcome for each patient, the 3D imaging should be done before the visit to the practitioner or ideally by the practitioner so that the results could be assessed, and the treatment adjusted accordingly. The implication of the volume changes requires a much larger study. PMID:29760821

Rational design of anode materials based on Group IVA elements (Si, Ge, and Sn) for lithium-ion batteries.

PubMed

Wu, Xing-Long; Guo, Yu-Guo; Wan, Li-Jun

2013-09-01

Lithium-ion batteries (LIBs) represent the state-of-the-art technology in rechargeable energy-storage devices and they currently occupy the prime position in the marketplace for powering an increasingly diverse range of applications. However, the fast development of these applications has led to increasing demands being placed on advanced LIBs in terms of higher energy/power densities and longer life cycles. For LIBs to meet these requirements, researchers have focused on active electrode materials, owing to their crucial roles in the electrochemical performance of batteries. For anode materials, compounds based on Group IVA (Si, Ge, and Sn) elements represent one of the directions in the development of high-capacity anodes. Although these compounds have many significant advantages when used as anode materials for LIBs, there are still some critical problems to be solved before they can meet the high requirements for practical applications. In this Focus Review, we summarize a series of rational designs for Group IVA-based anode materials, in terms of their chemical compositions and structures, that could address these problems, that is, huge volume variations during cycling, unstable surfaces/interfaces, and invalidation of transport pathways for electrons upon cycling. These designs should at least include one of the following structural benefits: 1) Contain a sufficient number of voids to accommodate the volume variations during cycling; 2) adopt a "plum-pudding"-like structure to limit the volume variations during cycling; 3) facilitate an efficient and permanent transport pathway for electrons and lithium ions; or 4) show stable surfaces/interfaces to stabilize the in situ formed SEI layers. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Analysis on LID for highly urbanized areas' waterlogging control: demonstrated on the example of Caohejing in Shanghai.

PubMed

Liao, Z L; He, Y; Huang, F; Wang, S; Li, H Z

2013-01-01

Although a commonly applied measure across the United States and Europe for alleviating the negative impacts of urbanization on the hydrological cycle, low impact development (LID) has not been widely used in highly urbanized areas, especially in rapidly urbanizing cities in developing countries like China. In this paper, given five LID practices including Bio-Retention, Infiltration Trench, Porous Pavement, Rain Barrels, and Green Swale, an analysis on LID for highly urbanized areas' waterlogging control is demonstrated using the example of Caohejing in Shanghai, China. Design storm events and storm water management models are employed to simulate the total waterlogging volume reduction, peak flow rate reduction and runoff coefficient reduction of different scenarios. Cost-effectiveness is calculated for the five practices. The aftermath shows that LID practices can have significant effects on storm water management in a highly urbanized area, and the comparative results reveal that Rain Barrels and Infiltration Trench are the two most suitable cost-effective measures for the study area.

The design, development, and test of balloonborne and groundbased lidar systems. Volume 3: Groundbased lidar systems

NASA Astrophysics Data System (ADS)

Shepherd, O.; Aurilio, G.; Bucknam, R. D.; Hurd, A. G.; Robertie, N. F.

1991-06-01

This is Volume 3 of a three volume final report on the design, development and test of balloonborne and groundbased lidar systems. Volume 1 describes the design and fabrication of a balloonborne CO2 coherent payload to measure the 10.6 micrometers backscatter from atmospheric aerosols as a function of altitude. Volume 2 describes the August 1987 flight test of Atmospheric Balloonborne Lidar Experiment, ABLE 2. In this volume we describe groundbased lidar development and measurements. A design was developed for installation of the ABLE lidar in the GL rooftop dome. A transportable shed was designed to house the ABLE lidar at the various remote measurement sites. Refurbishment and modification of the ABLE lidar were completed to permit groundbased lidar measurements of clouds and aerosols. Lidar field measurements were made at Ascension Island during SABLE 89. Lidar field measurements were made at Terciera, Azores during GABLE 90. These tasks have been successfully completed, and recommendations for further lidar measurements and data analysis have been made.

Tower Shielding Reactor II design and operation report: Vol. 2. Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, L. B.; Kolb, J. O.

1970-01-01

Information on the Tower Shielding Reactor II is contained in the TSR-II Design and Operation Report and in the Tower Shielding Facility Manual. The TSR-II Design and Operating Report consists of three volumes. Volume 1 is Descriptions of the Tower Shielding Reactor II and Facility; Volume 2 is Safety analysis of the Tower Shielding Reactor II; and Volume 3 is the Assembly and Testing of the Tower Shielding Reactor II Control Mechanism Housing.

Turbine design review text

NASA Technical Reports Server (NTRS)

1975-01-01

Three-volume publication covers theoretical, design, and performance aspects of turbines. Volumes cover thermodynamic and fluid-dynamic concepts, velocity diagram design, turbine blade aerodynamic design, turbine energy losses, supersonic turbines, radial-inflow turbines, turbine cooling, and aerodynamic performance testing.

Teledermatology in the United States: An Update in a Dynamic Era.

PubMed

Yim, Kaitlyn M; Florek, Aleksandra G; Oh, Dennis H; McKoy, Karen; Armstrong, April W

2018-01-22

Teledermatology is rapidly advancing in the United States. The last comprehensive survey of U.S. teledermatology programs was conducted in 2011. This article provides an update regarding the state of teledermatology programs in the United States. Active programs were identified and surveyed from November 2014 to January 2017. Findings regarding practice settings, consult volumes, payment methods, and delivery modalities were compared to those from the 2011 survey. Findings from the Veterans Affairs (VA) were reported as an aggregate. There were 40 active nongovernmental programs, amounting to a 48% increase and 30% discontinuation rate over five years. Academia remained the most common practice setting (50%). Median annual consultation volume was comparable with 263 consultations, but maximum annual consultation volume increased (range: 20-20,000). The most frequent payment method was self-pay (53%). Store-and-forward continued to be the most common delivery modality. In Fiscal Year 2016, the VA System consisted of 62 consultation sites and performed a total of 101,507 consultations. The limitations of this study were that consult volume and payment methods were not available from all programs. U.S. teledermatology programs have increased in number and annual consultation volume. Academia is the most prevalent practice setting, and self-pay is the dominant accepted payment method. Innovative platforms and the provision of direct-to-patient care are changing the practice of teledermatology.

Changes in the Hiring Process: New Actors, New Practices, and New Challenges. Final Report. Volume I: Findings and Implications [and] Volume II: Appendices.

ERIC Educational Resources Information Center

Kogan, Deborah; And Others

Trends in the recruitment and hiring practices of U.S. private sector firms were examined by analyzing data from the following: a literature review; telephone discussions with representatives of 13 key national labor market intermediaries (outplacement, career management, job search, screening, and staffing service firms); telephone discussions…

Decolonisation, Globalisation: Language-in-Education Policy and Practice. New Perspectives on Language and Education

ERIC Educational Resources Information Center

Lin, Angel M. Y., Ed.; Martin, Peter W., Ed.

2005-01-01

This volume brings together scholars from around the world to juxtapose the voices of classroom participants alongside the voices of ruling elites with the aim of critically linking language policy issues with classroom practice in a range of contexts. The volume is suitable for postgraduate students, researchers and educators in a range of areas.…

Accurate, consistent, and fast droplet splitting and dispensing in electrowetting on dielectric digital microfluidics

NASA Astrophysics Data System (ADS)

Nikapitiya, N. Y. Jagath B.; Nahar, Mun Mun; Moon, Hyejin

2017-12-01

This letter reports two novel electrode design considerations to satisfy two very important aspects of EWOD operation—(1) Highly consistent volume of generated droplets and (2) Highly improved accuracy in the generated droplet volume. Considering the design principles investigated two novel designs were proposed; L-junction electrode design to offer high throughput droplet generation and Y-junction electrode design to split a droplet very fast while maintaining equal volume of each part. Devices of novel designs were fabricated and tested, and the results are compared with those of conventional approach. It is demonstrated that inaccuracy and inconsistency of droplet volume dispensed in the device with novel electrode designs are as low as 0.17 and 0.10%, respectively, while those of conventional approach are 25 and 0.76%, respectively. The dispensing frequency is enhanced from 4 to 9 Hz by using the novel design.

Study of water recovery and solid waste processing for aerospace and domestic applications. Volume 2: Final report

NASA Technical Reports Server (NTRS)

Guarneri, C. A.; Reed, A.; Renman, R. E.

1972-01-01

The manner in which current and advanced technology can be applied to develop practical solutions to existing and emerging water supply and waste disposal problems is evaluated. An overview of water resource factors as they affect new community planning, and requirements imposed on residential waste treatment systems are presented. The results of equipment surveys contain information describing: commercially available devices and appliances designed to conserve water; devices and techniques for monitoring water quality and controlling back contamination; and advanced water and waste processing equipment. System concepts are developed and compared on the basis of current and projected costs. Economic evaluations are based on community populations of from 2,000 to 250,000. The most promising system concept is defined in sufficient depth to initiate detailed design.

Pros and cons of practice-owned and office-based ambulatory surgery centers.

PubMed

Bert, J M

2000-01-01

A detailed feasibility analysis is imperative to ensure the success of a practice-owned ASC. Analysis of the payer mix and the market relating to surgical volume that can be performed at the ASC is imperative. If overbuilding, overequipping, and overstaffing are avoided and the group has adequate volume that can be managed at the ASC, the facility should be a success. Building a practice-owned ASC without an accurate and detailed financial feasibility and payer study can place the endeavor at risk. A well-planned, economically constructed and properly managed ASC will result in an efficient and successful ancillary service for the orthopedic group practice.

Lunar Architecture Team - Phase 2 Habitat Volume Estimation: "Caution When Using Analogs"

NASA Technical Reports Server (NTRS)

Rudisill, Marianne; Howard, Robert; Griffin, Brand; Green, Jennifer; Toups, Larry; Kennedy, Kriss

2008-01-01

The lunar surface habitat will serve as the astronauts' home on the moon, providing a pressurized facility for all crew living functions and serving as the primary location for a number of crew work functions. Adequate volume is required for each of these functions in addition to that devoted to housing the habitat systems and crew consumables. The time constraints of the LAT-2 schedule precluded the Habitation Team from conducting a complete "bottoms-up" design of a lunar surface habitation system from which to derive true volumetric requirements. The objective of this analysis was to quickly derive an estimated total pressurized volume and pressurized net habitable volume per crewmember for a lunar surface habitat, using a principled, methodical approach in the absence of a detailed design. Five "heuristic methods" were used: historical spacecraft volumes, human/spacecraft integration standards and design guidance, Earth-based analogs, parametric "sizing" tools, and conceptual point designs. Estimates for total pressurized volume, total habitable volume, and volume per crewmember were derived using these methods. All method were found to provide some basis for volume estimates, but values were highly variable across a wide range, with no obvious convergence of values. Best current assumptions for required crew volume were provided as a range. Results of these analyses and future work are discussed.

Combat Development Study. Close Support Study Group 2 (CSSG 2). Volume 3. Main Report. Chapters 8-14 and Appendices A-G

DTIC Science & Technology

1980-02-01

support structure with respect to laser designation and acquistion systems and laser/guided munitions? Discussion, The advanced attack helicopter cu...times to practically zero even under the heavy load conditions described herein. The AMSAA analysis results, described In a preceding paragraph, were...M113A1 (1) AN/VRC-47 (1) GLLD (1) AN/VRC-47 (2) AN/GRC-160 (1) PADS (2) AN/GRC-160 (1) AN/GRA-39 (1) AN/VRC-47 (2) AN/GRA-39 (1) KY-38 (2) AN/GRC-160

Proceedings of the Ship Control Systems Symposium (9th) Held in Bethesda, Maryland on 10-14 September 1990. Theme: Automation in Surface Ship Control Systems, Today’s Applications and Future Trends. Volume 1

DTIC Science & Technology

1990-09-14

transmission of detected variations through sound lines of communication to centrally located standard Navy computers . These computers would be programmed to...have been programmed in C language. The program runs under the operating system ,OS9 on a VME-bus computer with a 68000 microprocessor. A number of full...present practice of"add-on" supervisory controls during ship design and construction,and "fix-it" R&D programs implemented after the ship isoperational

International Continence Society guidelines on urodynamic equipment performance.

PubMed

Gammie, Andrew; Clarkson, Becky; Constantinou, Chris; Damaser, Margot; Drinnan, Michael; Geleijnse, Geert; Griffiths, Derek; Rosier, Peter; Schäfer, Werner; Van Mastrigt, Ron

2014-04-01

These guidelines provide benchmarks for the performance of urodynamic equipment, and have been developed by the International Continence Society to assist purchasing decisions, design requirements, and performance checks. The guidelines suggest ranges of specification for uroflowmetry, volume, pressure, and EMG measurement, along with recommendations for user interfaces and performance tests. Factors affecting measurement relating to the different technologies used are also described. Summary tables of essential and desirable features are included for ease of reference. It is emphasized that these guidelines can only contribute to good urodynamics if equipment is used properly, in accordance with good practice. © 2014 Wiley Periodicals, Inc.

Modeling light

NASA Astrophysics Data System (ADS)

Dawson, P.; Gage, J.; Takatsuka, M.; Goyette, S.

2009-02-01

To compete with other digital images, holograms must go beyond the current range of source-image types, such as sequences of photographs, laser scans, and 3D computer graphics (CG) scenes made with software designed for other applications. This project develops a set of innovative techniques for creating 3D digital content specifically for digital holograms, with virtual tools which enable the direct hand-crafting of subjects, mark by mark, analogous to Michelangelo's practice in drawing, painting and sculpture. The haptic device, the Phantom Premium 1.5 is used to draw against three-dimensional laser- scan templates of Michelangelo's sculpture placed within the holographic viewing volume.

Solar/hydrogen systems assessment. Volume 1: Solar/hydrogen systems for the 1985 - 2000 time frame

NASA Technical Reports Server (NTRS)

Foster, R. W.; Tison, R. R.; Escher, W. J. D.; Hanson, J. A.

1980-01-01

Opportunities for commercialization of systems capable of producing hydrogen from solar energy were studied. The hydrogen product costs that might be achieved by the four selected candidate systems was compared with the pricing structure and practices of the commodity gas market. Subsequently, product cost and market price match was noted to exist in the small user sector of the hydrogen marketplace. Barriers to and historical time lags in, commercialization of new technologies are reviewed. Recommendations for development and demonstration programs designed to accelerate the commercialization of the candidate systems are presented.

Introduction to Semiconductor Devices

NASA Astrophysics Data System (ADS)

Brennan, Kevin F.

2005-03-01

This volume offers a solid foundation for understanding the most important devices used in the hottest areas of electronic engineering today, from semiconductor fundamentals to state-of-the-art semiconductor devices in the telecommunications and computing industries. Kevin Brennan describes future approaches to computing hardware and RF power amplifiers, and explains how emerging trends and system demands of computing and telecommunications systems influence the choice, design and operation of semiconductor devices. In addition, he covers MODFETs and MOSFETs, short channel effects, and the challenges faced by continuing miniaturization. His book is both an excellent senior/graduate text and a valuable reference for practicing engineers and researchers.

Asymmetrical booster ascent guidance and control system design study. Volume 5: Space shuttle powered explicit guidance. [space shuttle development

NASA Technical Reports Server (NTRS)

Jaggers, R. F.

1974-01-01

An optimum powered explicit guidance algorithm capable of handling all space shuttle exoatospheric maneuvers is presented. The theoretical and practical basis for the currently baselined space shuttle powered flight guidance equations and logic is documented. Detailed flow diagrams for implementing the steering computations for all shuttle phases, including powered return to launch site (RTLS) abort, are also presented. Derivation of the powered RTLS algorithm is provided, as well as detailed flow diagrams for implementing the option. The flow diagrams and equations are compatible with the current powered flight documentation.

Data Representation, Coding, and Communication Standards.

PubMed

Amin, Milon; Dhir, Rajiv

2015-06-01

The immense volume of cases signed out by surgical pathologists on a daily basis gives little time to think about exactly how data are stored. An understanding of the basics of data representation has implications that affect a pathologist's daily practice. This article covers the basics of data representation and its importance in the design of electronic medical record systems. Coding in surgical pathology is also discussed. Finally, a summary of communication standards in surgical pathology is presented, including suggested resources that establish standards for select aspects of pathology reporting. Copyright © 2015 Elsevier Inc. All rights reserved.

Solar/hydrogen systems assessment. Volume 1: Solar/hydrogen systems for the 1985 - 2000 time frame

NASA Astrophysics Data System (ADS)

Foster, R. W.; Tison, R. R.; Escher, W. J. D.; Hanson, J. A.

1980-06-01

Opportunities for commercialization of systems capable of producing hydrogen from solar energy were studied. The hydrogen product costs that might be achieved by the four selected candidate systems was compared with the pricing structure and practices of the commodity gas market. Subsequently, product cost and market price match was noted to exist in the small user sector of the hydrogen marketplace. Barriers to and historical time lags in, commercialization of new technologies are reviewed. Recommendations for development and demonstration programs designed to accelerate the commercialization of the candidate systems are presented.

Optimal design of the first stage of the plate-fin heat exchanger for the EAST cryogenic system

NASA Astrophysics Data System (ADS)

Qingfeng, JIANG; Zhigang, ZHU; Qiyong, ZHANG; Ming, ZHUANG; Xiaofei, LU

2018-03-01

The size of the heat exchanger is an important factor determining the dimensions of the cold box in helium cryogenic systems. In this paper, a counter-flow multi-stream plate-fin heat exchanger is optimized by means of a spatial interpolation method coupled with a hybrid genetic algorithm. Compared with empirical correlations, this spatial interpolation algorithm based on a kriging model can be adopted to more precisely predict the Colburn heat transfer factors and Fanning friction factors of offset-strip fins. Moreover, strict computational fluid dynamics simulations can be carried out to predict the heat transfer and friction performance in the absence of reliable experimental data. Within the constraints of heat exchange requirements, maximum allowable pressure drop, existing manufacturing techniques and structural strength, a mathematical model of an optimized design with discrete and continuous variables based on a hybrid genetic algorithm is established in order to minimize the volume. The results show that for the first-stage heat exchanger in the EAST refrigerator, the structural size could be decreased from the original 2.200 × 0.600 × 0.627 (m3) to the optimized 1.854 × 0.420 × 0.340 (m3), with a large reduction in volume. The current work demonstrates that the proposed method could be a useful tool to achieve optimization in an actual engineering project during the practical design process.

Building America Best Practices Series Volume 11. Builders Challenge Guide to 40% Whole-House Energy Savings in the Marine Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.

2010-09-01

This best practices guide is the eleventh in a series of guides for builders produced by the U.S. Department of Energy’s Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the marine climate (portions of Washington, Oregon, and California) can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s buildingmore » practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building America’s research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the marine climate. This document is available on the web at www.buildingamerica.gov. This report was originally cleared 06-29-2010. This version is Rev 1 cleared in Nov 2010. The only change is the reference to the Energy Star Windows critieria shown on pg 8.25 was updated to match the criteria - Version 5.0, 04/07/2009, effective 01/04/2010.« less

The applied technologies to access clean water for remote communities

NASA Astrophysics Data System (ADS)

Rabindra, I. B.

2018-01-01

A lot of research is done to overcome the remote communities to access clean water, yet very little is utilized and implemented by the community. Various reasons can probably be made for, which is the application of research results is assessed less practical. The aims of this paper is seeking a practical approach, how to establish criteria for the design can be easier applied, at the proper locations, the simple construction, effectively producing a volume and quality of clean water designation. The methods used in this paper is a technological model assessment of treatment/filtering clean water produced a variety of previous research, to establish a model of appropriate technology for remote communities. Various research results collected from the study of literature, while the identification of opportunities and threats to its application is done using a SWOT analysis. This article discussion is looking for alternative models of clean water filtration technology from the previous research results, to be selected as appropriate technology, easily applied and bring of many benefits to the remote communities. The conclusions resulting from the discussion in this paper, expected to be used as the basic criteria of design model of clean water filtration technologies that can be accepted and applied effectively by the remote communities.

[The shutdown point and the output volume limit (OVL) in the present situation of healthcare in Hungary (or a little economics for practicing physicians)].

PubMed

Gresz, Miklós

2008-09-07

In the present situation of health care, financing has become so complicated that the treating doctor has to know not only his profession but also has to consider the different regulations, laws and book of rules. The work of the physician cannot be carried out only through the fact that he is a master of his art, that is healing. All healing practice, diagnostic abilities, intuition, empathy and other things are in vain: if he is not familiar with the basics of financing he can lead his institution to insolvency. This article tries to give a view of a small part of financing, the output volume limit (OVL) from another aspect. According to the basics of economy and general rules of leadership it tries to show up the practical difficulties of the output volume limit. The study enlightens that by defining the output volume limit one has to consider the shutdown point of the hospital and knowing this, the actual output volume limit should be defined in the way that it does not make the proper activity of the hospital completely impossible.

The British Association of Urological Surgeons (BAUS) radical prostatectomy audit 2014/2015 - an update on current practice and outcomes by centre and surgeon case-volume.

PubMed

Khadhouri, Sinan; Miller, Catherine; Fowler, Sarah; Hounsome, Luke; McNeill, Alan; Adshead, Jim; McGrath, John S

2018-02-01

To describe contemporary radical prostatectomy (RP) practice using the British Association of Urological Surgeons (BAUS) data and audit project and to observe differences in practice in relation to surgeon or centre case-volume. Data on 13 920 RP procedures performed by 179 surgeons across 86 centres were recorded on the BAUS data and audit platform between 1 January 2014 and 31 December 2015. This equates to ~95% of total RPs performed over this period when compared to Hospital Episode Statistics (HES) data. Centre case-volumes were categorised as 'high' (>200), 'medium' (100-200) and 'low' (<100); surgeon case-volumes were categorised as 'high' (>100) and 'low' (<100). Differences in surgical practice and selected outcome measures were observed between groups. All data and volume categories were for the combined 2-year period. The median number of RPs performed over the 2-year period was 63.5 per surgeon and 164 per centre. Overall, surgical approach was robot-assisted laparoscopic RP (RALP) in 65%, laparoscopic RP (LRP) in 23%, and open RP (ORP) in 12%. The dominant approach in high-case-volume centres and by high-case-volume surgeons was RALP (74.3% and 69.2%, respectively). There was a greater percentage of ORPs reported by low-volume surgeons and centres when compared to higher volume equivalents. In all, 51.6% of all patients in this series underwent RP in high-case-volume centres using robot-assisted surgery (RAS). High-case-volume surgeons performed nerve-sparing (NS) procedures on 57.3% of their cases; low-volume surgeons performing NS on 48.2%. Overall, lymph node dissection (LND) rates were very similar across the groups. An 'extended' LND was more commonly performed in high-volume centres (22.1%). The median length of stay (LOS) was lowest in patients undergoing RALP at high-volume centres (1 day) and highest in ORP across all volume categories (3-4 days). Reported pT2 positive surgical margin (PSM) rate varied by technique, centre volume, and surgeon volume. In general, observed PSM rates were lower when RALP was the surgical approach (14.4%) and when high-volume surgeons were compared to low-volume surgeons (13.6% vs 17.7%). Transfusion rates were highest in ORP across all centres and surgeons (2.96-4.49%) compared to techniques using a minimally-invasive approach (0.25-2.41%). Training cases ranged from 0.5% in low-volume centres to 6.0% in high-volume centres. Compliance with data registration for centres and surgeons performing RP is high in the present series. Most RPs were performed in high-case-volume centres and by high-case-volume surgeons, with the most common approaches being minimally invasive and specifically RAS. High-case-volume centres and surgeons reported higher rates of extended LND and training cases. Higher-case-volume surgeons reported lower pT2 PSM rates, whilst the most marked differences in transfusion rates and LOS were seen when ORP was compared to minimally invasive approaches. Caution must be applied when interpreting these differences on the basis of this being registry data - causality cannot be assumed. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

40 CFR 80.599 - How do I calculate volume balances for designation purposes?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false How do I calculate volume balances for... § 80.599 How do I calculate volume balances for designation purposes? (a) Quarterly compliance periods... June 30, 2013. July 1, 2013 May 31, 2014. (2) [Reserved] (b) Volume balance for motor vehicle diesel...

40 CFR 80.599 - How do I calculate volume balances for designation purposes?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How do I calculate volume balances for... § 80.599 How do I calculate volume balances for designation purposes? (a) Quarterly compliance periods... June 30, 2013. July 1, 2013 May 31, 2014. (2) [Reserved] (b) Volume balance for motor vehicle diesel...

Extending unbiased stereology of brain ultrastructure to three-dimensional volumes

NASA Technical Reports Server (NTRS)

Fiala, J. C.; Harris, K. M.; Koslow, S. H. (Principal Investigator)

2001-01-01

OBJECTIVE: Analysis of brain ultrastructure is needed to reveal how neurons communicate with one another via synapses and how disease processes alter this communication. In the past, such analyses have usually been based on single or paired sections obtained by electron microscopy. Reconstruction from multiple serial sections provides a much needed, richer representation of the three-dimensional organization of the brain. This paper introduces a new reconstruction system and new methods for analyzing in three dimensions the location and ultrastructure of neuronal components, such as synapses, which are distributed non-randomly throughout the brain. DESIGN AND MEASUREMENTS: Volumes are reconstructed by defining transformations that align the entire area of adjacent sections. Whole-field alignment requires rotation, translation, skew, scaling, and second-order nonlinear deformations. Such transformations are implemented by a linear combination of bivariate polynomials. Computer software for generating transformations based on user input is described. Stereological techniques for assessing structural distributions in reconstructed volumes are the unbiased bricking, disector, unbiased ratio, and per-length counting techniques. A new general method, the fractional counter, is also described. This unbiased technique relies on the counting of fractions of objects contained in a test volume. A volume of brain tissue from stratum radiatum of hippocampal area CA1 is reconstructed and analyzed for synaptic density to demonstrate and compare the techniques. RESULTS AND CONCLUSIONS: Reconstruction makes practicable volume-oriented analysis of ultrastructure using such techniques as the unbiased bricking and fractional counter methods. These analysis methods are less sensitive to the section-to-section variations in counts and section thickness, factors that contribute to the inaccuracy of other stereological methods. In addition, volume reconstruction facilitates visualization and modeling of structures and analysis of three-dimensional relationships such as synaptic connectivity.

Effects of training in minimalist shoes on the intrinsic and extrinsic foot muscle volume.

PubMed

Chen, Tony Lin-Wei; Sze, Louis K Y; Davis, Irene S; Cheung, Roy T H

2016-07-01

Minimalist shoes have gained popularity recently because it is speculated to strengthen the foot muscles and foot arches, which may help to resist injuries. However, previous studies provided limited evidence supporting the link between changes in muscle size and footwear transition. Therefore, this study sought to examine the effects of minimalist shoes on the intrinsic and extrinsic foot muscle volume in habitual shod runners. The relationship between participants' compliance with the minimalist shoes and changes in muscle õvolume was also evaluated. Twenty habitual shod runners underwent a 6-month self-monitoring training program designed for minimalist shoe transition. Another 18 characteristics-matched shod runners were also introduced with the same program but they maintained running practice with standard shoes. Runners were monitored using an online surveillance platform during the program. We measured overall intrinsic and extrinsic foot muscle volume before and after the program using MRI scans. Runners in the experimental group exhibited significantly larger leg (P=0.01, Cohen's d=0.62) and foot (P<0.01, Cohen's d=0.54) muscle after transition. Foot muscle growth was mainly contributed by the forefoot (P<0.01, Cohen's d=0.64) but not the rearfoot muscle (P=0.10, Cohen's d=0.30). Leg and foot muscle volume of runners in the control group remained similar after the program (P=0.33-0.95). A significant positive correlation was found between participants' compliance with the minimalist shoes and changes in leg muscle volume (r=0.51; P=0.02). Habitual shod runners who transitioned to minimalist shoes demonstrated significant increase in leg and foot muscle volume. Additionally, the increase in leg muscle volume was significantly correlated associated with the compliance of minimalist shoe use. Copyright © 2016 Elsevier Ltd. All rights reserved.

Which echocardiographic parameter is a better marker of volume status in hemodialysis patients?

PubMed

Sabaghian, Tahereh; Hajibaratali, Bahareh; Samavat, Shiva

2016-11-01

Bio-impedance analysis (BIA) is a preferred method for estimating the volume status. However, it cannot be utilized in daily practice. Since the assessment of the volume status is important and challenging for hemodialysis (HD) patients, the aim of study was to determine the volume status in chronic HD patients using echocardiographic parameters and assess its correlation with BIA. In this cross-sectional analysis, echocardiography and BIA were performed on 30 chronic HD patients 30 min before and 30 min after dialysis. All the cases of dialysis were performed in the middle of the week. This study also assessed the correlation between echocardiographic parameters and BIA parameters. There were significant differences between ECW, TBW, and TBW% (TBW/W) before and after HD. Significant differences were observed between echocardiographic parameters of IVCD, IVCDi min , IVCDi max before and after the HD. LVEDD, LVESD, LA area, mitral valve inflow, E/E', and IVRT, were improved after dialysis, too. There was a significant correlation between IVCDi min as an index of volume status, ECW% and TBW% before HD and IVCDi min change after dialysis had a significant correlation with %ECW change after dialysis. Comparison between hypertensive and non-hypertensive groups indicated IVCDi min was significantly lower in non-hypertensive group after dialysis. Our results showed a correlation between IVCDi min and BIA parameters before HD. So, it seems that IVCDi min can be a good parameter for determining the volume status of HD patients. However, further studies, with larger sample size and with a prospective study design, are required to confirm these results.

An operator calculus for surface and volume modeling

NASA Technical Reports Server (NTRS)

Gordon, W. J.

1984-01-01

The mathematical techniques which form the foundation for most of the surface and volume modeling techniques used in practice are briefly described. An outline of what may be termed an operator calculus for the approximation and interpolation of functions of more than one independent variable is presented. By considering the linear operators associated with bivariate and multivariate interpolation/approximation schemes, it is shown how they can be compounded by operator multiplication and Boolean addition to obtain a distributive lattice of approximation operators. It is then demonstrated via specific examples how this operator calculus leads to practical techniques for sculptured surface and volume modeling.

Mod-5A Wind Turbine Generator Program Design Report. Volume 2: Conceptual and Preliminary Design, Book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. There are four volumes. In Volume 2, book 1 the requirements and criteria for the design are presented. The conceptual design studies, which defined a baseline configuration and determined the weights, costs and sizes of each subsystem, are described. The development and optimization of the wind turbine generator are presented through the description of the ten intermediate configurations between the conceptual and final designs. Analyses of the system's load and dynamics are presented.

The design, development, and test of balloonborne and groundbased lidar systems. Volume 2: Flight test of Atmospheric Balloon Lidar Experiment, ABLE 2

NASA Astrophysics Data System (ADS)

Shepherd, O.; Bucknam, R. D.; Hurd, A. G.; Sheehan, W. H.

1991-06-01

This is Volume 3 of a three volume final report on the design, development, and test of balloonborne and groundbased lidar systems. Volume 1 describes the design and fabrication of a balloonborne CO2 coherent payload to measure the 10.6 micrometers backscatter from atmospheric aerosols as a function of altitude. Volume 2 describes the Aug. 1987 flight test of Atmospheric Balloonborne Lidar Experiment, ABLE 2. In this volume we describe groundbased lidar development and measurements. A design was developed for installation of the ABLE lidar in the GL rooftop dome. A transportable shed was designed to house the ABLE lidar at the various remote measurement sites. Refurbishment and modification of the ABLE lidar were completed to permit groundbased lidar measurements of clouds and aerosols. Lidar field measurements were made at Ascension Island during SABLE 89. Lidar field measurements were made at Terciera, Azores during GABLE 90. These tasks were successfully completed, and recommendations for further lidar measurements and data analysis were made.

A comparison of three methods of setting prescribing budgets, using data derived from defined daily dose analyses of historic patterns of use.

PubMed Central

Maxwell, M; Howie, J G; Pryde, C J

1998-01-01

BACKGROUND: Prescribing matters (particularly budget setting and research into prescribing variation between doctors) have been handicapped by the absence of credible measures of the volume of drugs prescribed. AIM: To use the defined daily dose (DDD) method to study variation in the volume and cost of drugs prescribed across the seven main British National Formulary (BNF) chapters with a view to comparing different methods of setting prescribing budgets. METHOD: Study of one year of prescribing statistics from all 129 general practices in Lothian, covering 808,059 patients: analyses of prescribing statistics for 1995 to define volume and cost/volume of prescribing for one year for 10 groups of practices defined by the age and deprivation status of their patients, for seven BNF chapters; creation of prescribing budgets for 1996 for each individual practice based on the use of target volume and cost statistics; comparison of 1996 DDD-based budgets with those set using the conventional historical approach; and comparison of DDD-based budgets with budgets set using a capitation-based formula derived from local cost/patient information. RESULTS: The volume of drugs prescribed was affected by the age structure of the practices in BNF Chapters 1 (gastrointestinal), 2 (cardiovascular), and 6 (endocrine), and by deprivation structure for BNF Chapters 3 (respiratory) and 4 (central nervous system). Costs per DDD in the major BNF chapters were largely independent of age, deprivation structure, or fundholding status. Capitation and DDD-based budgets were similar to each other, but both differed substantially from historic budgets. One practice in seven gained or lost more than 100,000 Pounds per annum using DDD or capitation budgets compared with historic budgets. The DDD-based budget, but not the capitation-based budget, can be used to set volume-specific prescribing targets. CONCLUSIONS: DDD-based and capitation-based prescribing budgets can be set using a simple explanatory model and generalizable methods. In this study, both differed substantially from historic budgets. DDD budgets could be created to accommodate new prescribing strategies and raised or lowered to reflect local intentions to alter overall prescribing volume or cost targets. We recommend that future work on setting budgets and researching prescribing variations should be based on DDD statistics. PMID:10024703

Education and Work. Proceedings of the International Conference Linking Research and Practice (Toronto, Ontario, March 4-6, 1993). Volumes 1-2.

ERIC Educational Resources Information Center

Corson, David, Ed.; Lawton, Stephen B., Ed.

These two volumes comprise the proceedings of a conference on links between education and work and the power relationships in the wider culture and in its social order. Each volume begins with a "Foreword" (Ronald C. Morrison), "Preface" (Arthur Kruger), "Introduction" (David Corson), and author notes. Volume I…

Alignment of training curriculum and surgical practice: implications for competency, manpower, and practice modeling.

PubMed

Sømme, S; Bronsert, M; Kempe, A; Morrato, E H; Ziegler, M

2012-02-01

The attractiveness of pediatric surgery (PS) as a specialty includes its primary role in the care of multisystemic disease. We were interested in identifying changes in operative case quality and quantity when comparing PS residents to PS practitioners. The 2006 Accreditation Council for Graduate Medical Education PS resident current procedural terminology (CPT) code database (26,077 resident cases) was merged with the 2006 Kids' Inpatient Database of International Classification of Diseases (ICD)-9 procedure codes (230,504 practitioner cases) and categorized by case type and volumes according to a resident CPT reference file. Cases were categorized into 84 procedure types. A recent estimate of 691 practicing pediatric surgeons was used as denominator to calculate case volume per surgeon. Our analysis focused on the PS index cases and we compared PS residents to subspecialty board certified general pediatric surgeons in practice. We excluded cases that may be performed by general surgeons without PS training. Our data indicate that, on average, 501 cases are performed annually by each PS resident. We identified significant differences in case volume per surgeon between training and practice for most PS index cases.CONCLUSIONS The PS index case quantity declined significantly from training to practice. If a volume to outcome relationship applies to these complex and infrequent PS cases, then to sustain and improve clinical quality post-training will require a new paradigm of continued learning. Additionally, a relook at the optimal manpower and more focused regionalization is warranted. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Differences in characteristics among new pediatric neurology patients: the effect of a newly established private pediatric neurology practice.

PubMed

Van Cleave, Jeanne; Woodruff, Brian; Freed, Gary L

2008-01-01

To investigate changes in volume and characteristics of new patients referred when a private pediatric neurology practice (PP) opened in 2004 in an area served primarily by an academic medical center's (AMC) pediatric neurology practice. Retrospective analysis of medical and billing records to examine changes in volume, diagnosis, and sociodemographic factors of new patients at the AMC from July 2004 to June 2005; the PP during the same period; and the AMC during the year before. One year after the PP opened, 40% more new pediatric neurology patients were seen in this area than the year before. Compared with the AMC, PP saw a greater proportion of seizures (34% vs 26%, P < .05) and headaches (32% vs 17%, P < .001), and a lesser proportion of developmental delay/musculoskeletal disorders (12% vs 19%, P < .001) and congenital/metabolic disorders (<1% vs 2%, P < .001). Fewer PP patients lived >20 miles from the practice (32% vs 64%, P < .001), and fewer had public insurance (4% vs 33%, P < .001). The establishment of the PP dramatically increased the volume of new pediatric neurology patients in this area. After the PP opened, the AMC continued to care for most patients with rare diseases and fewer financial resources. Future research should examine whether the increase in volume reflects relief of pent-up demand or increased referral rates due to eased access, and should elucidate how differences in patient populations at academic and private subspecialty practices relate to access to subspecialty care and financial well-being of academic practices.

Associations of farm management practices with annual milk sales on smallholder dairy farms in Kenya.

PubMed

Richards, Shauna; VanLeeuwen, John; Shepelo, Getrude; Gitau, George Karuoya; Kamunde, Collins; Uehlinger, Fabienne; Wichtel, Jeff

2015-01-01

Cows on smallholder dairy farms (SDF) in developing countries such as Kenya typically produce volumes of milk that are well below their genetic potential. An epidemiological study was conducted to determine reasons for this low milk production, including limited use of best management practices, such as suboptimal nutritional management. An observational cross-sectional study of 111 SDF was performed in Nyeri County, Kenya in June of 2013 determining the effect of cow factors, farmer demographics and farm management practices on the volume of milk sold per cow per year (kg milk sold/cow). In particular, the effect of feeding high protein fodder trees and other nutritional management practices were examined. Approximatly 38% of farmers fed fodder trees, but such feeding was not associated with volume of milk sold per cow, likely due to the low number of fodder trees per farm. Volume of milk sold per cow was positively associated with feeding dairy meal during the month prior to calving, feeding purchased hay during the past year, deworming cows every 4 or more months (as opposed to more regularly), and having dairy farming as the main source of family income. Volume of milk sold per cow was negatively associated with a household size of >5 people and feeding Napier grass at >2 meters in height during the dry season. An interaction between gender of the principal farmer and feed shortages was noted; volume of milk sold per cow was lower when female farmers experienced feed shortages whereas milk sold per cow was unaffected when male farmers experienced feed shortages. These demographic and management risk factors should be considered by smallholder dairy farmers and their advisors when developing strategies to improve income from milk sales and animal-source food availability for the farming families.

Ceramic transactions - Materials processing and design: Grain-boundary-controlled properties of fine ceramics II. Volume 44

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niihara, Koichi; Ishizaki, Kozo; Isotani, Mitsuo

This volume contains selected papers presented at a workshop by the Japan Fine Ceramics Center, `Materials Processing and Design Through Better Control of Grain Boundaries: Emphasizing Fine Ceramics II,` which was held March 17-19, 1994, in Koda-cho, Aichi, Japan. The focus of the workshop was the application of grain boundary phenomena to materials processing and design. The topics covered included electronic materials, evaluation methods, structural materials, and interfaces. Also included is an illuminating overview of the current status of work on grain boundary assisted materials processing and design, particularly for fine ceramics. The volume`s chapter titles are: Electron Microscopy, Evaluation,more » Grain Boundary Control and Design, Functional Ceramics, Composite Materials, Synthesis and Sintering, and Mechanical Properties.« less

Even the Janitor Is White: Educating for Cultural Diversity in Small Colleges and Universities. Critical Education and Ethics. Volume 4

ERIC Educational Resources Information Center

Hickey, M. Gail, Ed.; Lanahan, Brian K., Ed.

2012-01-01

"Even the Janitor Is White" addresses challenges faced by teacher educators who are committed to diversity education. The chapters in this volume invite readers to reflect on their own practice as teacher educators as well as consider ways in which that practice might be improved. More than forty percent of students in U.S. schools are…

Portraits of the Changes, the Players, and the Contexts. A Study of Dissemination Efforts Supporting School Improvement. People, Policies, and Practices: Examining the Chain of School Improvement, Volume II.

ERIC Educational Resources Information Center

Loucks, Susan F.; And Others

Based on a local site sample of 146 school districts, this volume (the second in a series of 10) describes school improvement efforts supported by 4 different federal strategies and representative programs: interpersonal linkage of validated practices (National Diffusion Network), commercial distribution (Bureau of Education for the Handicapped…

Neuroprotective effects of yoga practice: age-, experience-, and frequency-dependent plasticity

PubMed Central

Villemure, Chantal; Čeko, Marta; Cotton, Valerie A.; Bushnell, M. Catherine

2015-01-01

Yoga combines postures, breathing, and meditation. Despite reported health benefits, yoga’s effects on the brain have received little study. We used magnetic resonance imaging to compare age-related gray matter (GM) decline in yogis and controls. We also examined the effect of increasing yoga experience and weekly practice on GM volume and assessed which aspects of weekly practice contributed most to brain size. Controls displayed the well documented age-related global brain GM decline while yogis did not, suggesting that yoga contributes to protect the brain against age-related decline. Years of yoga experience correlated mostly with GM volume differences in the left hemisphere (insula, frontal operculum, and orbitofrontal cortex) suggesting that yoga tunes the brain toward a parasympatically driven mode and positive states. The number of hours of weekly practice correlated with GM volume in the primary somatosensory cortex/superior parietal lobule (S1/SPL), precuneus/posterior cingulate cortex (PCC), hippocampus, and primary visual cortex (V1). Commonality analyses indicated that the combination of postures and meditation contributed the most to the size of the hippocampus, precuneus/PCC, and S1/SPL while the combination of meditation and breathing exercises contributed the most to V1 volume. Yoga’s potential neuroprotective effects may provide a neural basis for some of its beneficial effects. PMID:26029093

A grid generation system for multi-disciplinary design optimization

NASA Technical Reports Server (NTRS)

Jones, William T.; Samareh-Abolhassani, Jamshid

1995-01-01

A general multi-block three-dimensional volume grid generator is presented which is suitable for Multi-Disciplinary Design Optimization. The code is timely, robust, highly automated, and written in ANSI 'C' for platform independence. Algebraic techniques are used to generate and/or modify block face and volume grids to reflect geometric changes resulting from design optimization. Volume grids are generated/modified in a batch environment and controlled via an ASCII user input deck. This allows the code to be incorporated directly into the design loop. Generated volume grids are presented for a High Speed Civil Transport (HSCT) Wing/Body geometry as well a complex HSCT configuration including horizontal and vertical tails, engine nacelles and pylons, and canard surfaces.

Performance analysis and optimization of radiating fins with a step change in thickness and variable thermal conductivity by homotopy perturbation method

NASA Astrophysics Data System (ADS)

Arslanturk, Cihat

2011-02-01

Although tapered fins transfer more rate of heat per unit volume, they are not found in every practical application because of the difficulty in manufacturing and fabrications. Therefore, there is a scope to modify the geometry of a constant thickness fin in view of the less difficulty in manufacturing and fabrication as well as betterment of heat transfer rate per unit volume of the fin material. For the better utilization of fin material, it is proposed a modified geometry of new fin with a step change in thickness (SF) in the literature. In the present paper, the homotopy perturbation method has been used to evaluate the temperature distribution within the straight radiating fins with a step change in thickness and variable thermal conductivity. The temperature profile has an abrupt change in the temperature gradient where the step change in thickness occurs and thermal conductivity parameter describing the variation of thermal conductivity has an important role on the temperature profile and the heat transfer rate. The optimum geometry which maximizes the heat transfer rate for a given fin volume has been found. The derived condition of optimality gives an open choice to the designer.

Brain structure links everyday creativity to creative achievement.

PubMed

Zhu, Wenfeng; Chen, Qunlin; Tang, Chaoying; Cao, Guikang; Hou, Yuling; Qiu, Jiang

2016-03-01

Although creativity is commonly considered to be a cornerstone of human progress and vital to all realms of our lives, its neural basis remains elusive, partly due to the different tasks and measurement methods applied in research. In particular, the neural correlates of everyday creativity that can be experienced by everyone, to some extent, are still unexplored. The present study was designed to investigate the brain structure underlying individual differences in everyday creativity, as measured by the Creative Behavioral Inventory (CBI) (N=163). The results revealed that more creative activities were significantly and positively associated with larger gray matter volume (GMV) in the regional premotor cortex (PMC), which is a motor planning area involved in the creation and selection of novel actions and inhibition. In addition, the gray volume of the PMC had a significant positive relationship with creative achievement and Art scores, which supports the notion that training and practice may induce changes in brain structures. These results indicate that everyday creativity is linked to the PMC and that PMC volume can predict creative achievement, supporting the view that motor planning may play a crucial role in creative behavior. Published by Elsevier Inc.

Adherence to Methodological Standards in Research Using the National Inpatient Sample.

PubMed

Khera, Rohan; Angraal, Suveen; Couch, Tyler; Welsh, John W; Nallamothu, Brahmajee K; Girotra, Saket; Chan, Paul S; Krumholz, Harlan M

2017-11-28

Publicly available data sets hold much potential, but their unique design may require specific analytic approaches. To determine adherence to appropriate research practices for a frequently used large public database, the National Inpatient Sample (NIS) of the Agency for Healthcare Research and Quality (AHRQ). In this observational study of the 1082 studies published using the NIS from January 2015 through December 2016, a representative sample of 120 studies was systematically evaluated for adherence to practices required by AHRQ for the design and conduct of research using the NIS. None. All studies were evaluated on 7 required research practices based on AHRQ's recommendations and compiled under 3 domains: (1) data interpretation (interpreting data as hospitalization records rather than unique patients); (2) research design (avoiding use in performing state-, hospital-, and physician-level assessments where inappropriate; not using nonspecific administrative secondary diagnosis codes to study in-hospital events); and (3) data analysis (accounting for complex survey design of the NIS and changes in data structure over time). Of 120 published studies, 85% (n = 102) did not adhere to 1 or more required practices and 62% (n = 74) did not adhere to 2 or more required practices. An estimated 925 (95% CI, 852-998) NIS publications did not adhere to 1 or more required practices and 696 (95% CI, 596-796) NIS publications did not adhere to 2 or more required practices. A total of 79 sampled studies (68.3% [95% CI, 59.3%-77.3%]) among the 1082 NIS studies screened for eligibility did not account for the effects of sampling error, clustering, and stratification; 62 (54.4% [95% CI, 44.7%-64.0%]) extrapolated nonspecific secondary diagnoses to infer in-hospital events; 45 (40.4% [95% CI, 30.9%-50.0%]) miscategorized hospitalizations as individual patients; 10 (7.1% [95% CI, 2.1%-12.1%]) performed state-level analyses; and 3 (2.9% [95% CI, 0.0%-6.2%]) reported physician-level volume estimates. Of 27 studies (weighted; 218 studies [95% CI, 134-303]) spanning periods of major changes in the data structure of the NIS, 21 (79.7% [95% CI, 62.5%-97.0%]) did not account for the changes. Among the 24 studies published in journals with an impact factor of 10 or greater, 16 (67%) did not adhere to 1 or more practices, and 9 (38%) did not adhere to 2 or more practices. In this study of 120 recent publications that used data from the NIS, the majority did not adhere to required practices. Further research is needed to identify strategies to improve the quality of research using the NIS and assess whether there are similar problems with use of other publicly available data sets.

Magnus effect: An overview of its past and future practical applications, 1850-1985, volumes 1 and 2

NASA Astrophysics Data System (ADS)

Borg, J.

The report is in two volumes and is intended to present the known data and past and future applications of Magnus effect devices. (Magnus effect devices are very high lift devices which can be used in applications where airfoils are currently used.) This first volume includes the history of Magnus effect devices, theory and principles, a significant patent review, practical marine applications, formulas and experimental data, comparisons of Magnus effect and other state-of-the-art devices, identification of further testing needed, and a proposed test program. Appendices include rudder research and a literature critique. The second volume is a collection of the drawings for 39 magnus effect patents plus a critique of each patent evaluating its potential, especially for marine applications.

The Effect of Yoga on Arm Volume, Strength, and Range of Motion in Women at Risk for Breast Cancer-Related Lymphedema.

PubMed

Mazor, Melissa; Lee, Jeannette Q; Peled, Anne; Zerzan, Sarah; Irwin, Chetan; Chesney, Margaret A; Serrurier, Katherine; Sbitany, Hani; Dhruva, Anand; Sacks, Devorah; Smoot, Betty

2018-02-01

To assess the feasibility, safety, and initial estimates of efficacy of a yoga program in postoperative care for women at high risk for breast cancer-related lymphedema (BCRL). Single-group pretest-post-test design. Patients were recruited from the University of California, San Francisco Carol Franc Buck Breast Care Center. Twenty-one women were enrolled in the study. Women were >18 years of age, had undergone surgical treatment for breast cancer, and were at high risk for BCRL. The women participated in an Ashtanga yoga intervention for 8 weeks. Sessions consisted of once/week instructor-led practice and once/week home practice. Particular attention was given to poses that emphasized upper body strength and flexibility, while avoiding significant time with the upper extremity (UE) in a dependent position. UE volume was assessed through circumferential forearm measurement, which was converted to volume using the formula for a truncated cone. Range of motion (ROM) was assessed for the shoulders, elbows, and wrists, using a standard goniometer. UE strength was assessed for shoulder abduction, elbow flexion, wrist flexion, and grip using a dynamometer. Twenty women completed the yoga intervention, with 17 returning for final assessment. Mean age was 52 (±9.1) years and body mass index was 24.8 (±5.1) kg/m 2 . Postintervention, mean volume in the at-risk UE was slightly reduced (p = 0.397). ROM for shoulder flexion (p < 0.01) and external rotation (p < 0.05) significantly increased bilaterally. Shoulder abduction ROM significantly improved for the unaffected limb (p = 0.001). Following intervention, strength improved on the affected side for shoulder abduction and grip strength, and bilaterally for elbow flexion (p < 0.05 for all). These preliminary findings suggest that yoga is feasible and safe for women who are at risk for BCRL and may result in small improvements in shoulder ROM and UE strength.

Gender and Education. An Encyclopedia. Volume II

ERIC Educational Resources Information Center

Bank, Barbara J., Ed.

2007-01-01

This book represents the second of two volumes in a two-volume set where educators explore the intersection of gender and education. Their entries deal with educational theories, research, curricula, practices, personnel, and policies, but also with variations in the gendering of education across historical and cultural contexts. The various…

Highway Safety Program Manual: Volume 2: Motor Vehicle Registration.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 2 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) describes the purposes and specific objectives of motor vehicle registration. Federal authority for vehicle registration and general policies regarding vehicle registration systems are outlined.…

Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

An Evaluation of Non-Formal Education in Ecuador. Volume 2: Overview and Evaluation Plan. Final Report.

ERIC Educational Resources Information Center

Laosa, Luis M.; And Others

As the second volume in a 4-volume evaluation report on the University of Massachusetts Non-Formal Education Project (UMass NFEP) in rural Ecuador, this volume details the evaluation design. Cited as basic to the evaluation design are questions which ask: (1) What kinds of effects (changes) can be observed? and (2) What are characteristics of the…

Railroad Classification Yard Technology Manual. Volume I : Yard Design Methods

DOT National Transportation Integrated Search

1981-02-01

This volume documents the procedures and methods associated with the design of railroad classification yards. Subjects include: site location, economic analysis, yard capacity analysis, design of flat yards, overall configuration of hump yards, hump ...

Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 1: Thermal analysis

NASA Technical Reports Server (NTRS)

Miller, W. S.

1974-01-01

The cryogenic refrigerator thermal design calculations establish design approach and basic sizing of the machine's elements. After the basic design is defined, effort concentrates on matching the thermodynamic design with that of the heat transfer devices (heat exchangers and regenerators). Typically, the heat transfer device configurations and volumes are adjusted to improve their heat transfer and pressure drop characteristics. These adjustments imply that changes be made to the active displaced volumes, compensating for the influence of the heat transfer devices on the thermodynamic processes of the working fluid. Then, once the active volumes are changed, the heat transfer devices require adjustment to account for the variations in flows, pressure levels, and heat loads. This iterative process is continued until the thermodynamic cycle parameters match the design of the heat transfer devices. By examing several matched designs, a near-optimum refrigerator is selected.

Effects of distributed and centralized stormwater best management practices and land cover on urban stream hydrology at the catchment scale

NASA Astrophysics Data System (ADS)

Loperfido, J. V.; Noe, Gregory B.; Jarnagin, S. Taylor; Hogan, Dianna M.

2014-11-01

Urban stormwater runoff remains an important issue that causes local and regional-scale water quantity and quality issues. Stormwater best management practices (BMPs) have been widely used to mitigate runoff issues, traditionally in a centralized manner; however, problems associated with urban hydrology have remained. An emerging trend is implementation of BMPs in a distributed manner (multi-BMP treatment trains located on the landscape and integrated with urban design), but little catchment-scale performance of these systems have been reported to date. Here, stream hydrologic data (March, 2011-September, 2012) are evaluated in four catchments located in the Chesapeake Bay watershed: one utilizing distributed stormwater BMPs, two utilizing centralized stormwater BMPs, and a forested catchment serving as a reference. Among urban catchments with similar land cover, geology and BMP design standards (i.e. 100-year event), but contrasting placement of stormwater BMPs, distributed BMPs resulted in: significantly greater estimated baseflow, a higher minimum precipitation threshold for stream response and maximum discharge increases, better maximum discharge control for small precipitation events, and reduced runoff volume during an extreme (1000-year) precipitation event compared to centralized BMPs. For all catchments, greater forest land cover and less impervious cover appeared to be more important drivers than stormwater BMP spatial pattern, and caused lower total, stormflow, and baseflow runoff volume; lower maximum discharge during typical precipitation events; and lower runoff volume during an extreme precipitation event. Analysis of hydrologic field data in this study suggests that both the spatial distribution of stormwater BMPs and land cover are important for management of urban stormwater runoff. In particular, catchment-wide application of distributed BMPs improved stream hydrology compared to centralized BMPs, but not enough to fully replicate forested catchment stream hydrology. Integrated planning of stormwater management, protected riparian buffers and forest land cover with suburban development in the distributed-BMP catchment enabled multi-purpose use of land that provided esthetic value and green-space, community gathering points, and wildlife habitat in addition to hydrologic stormwater treatment.

Effects of distributed and centralized stormwater best management practices and land cover on urban stream hydrology at the catchment scale

USGS Publications Warehouse

Loperfido, John V.; Noe, Gregory B.; Jarnagin, S. Taylor; Hogan, Dianna M.

2014-01-01

Urban stormwater runoff remains an important issue that causes local and regional-scale water quantity and quality issues. Stormwater best management practices (BMPs) have been widely used to mitigate runoff issues, traditionally in a centralized manner; however, problems associated with urban hydrology have remained. An emerging trend is implementation of BMPs in a distributed manner (multi-BMP treatment trains located on the landscape and integrated with urban design), but little catchment-scale performance of these systems have been reported to date. Here, stream hydrologic data (March, 2011–September, 2012) are evaluated in four catchments located in the Chesapeake Bay watershed: one utilizing distributed stormwater BMPs, two utilizing centralized stormwater BMPs, and a forested catchment serving as a reference. Among urban catchments with similar land cover, geology and BMP design standards (i.e. 100-year event), but contrasting placement of stormwater BMPs, distributed BMPs resulted in: significantly greater estimated baseflow, a higher minimum precipitation threshold for stream response and maximum discharge increases, better maximum discharge control for small precipitation events, and reduced runoff volume during an extreme (1000-year) precipitation event compared to centralized BMPs. For all catchments, greater forest land cover and less impervious cover appeared to be more important drivers than stormwater BMP spatial pattern, and caused lower total, stormflow, and baseflow runoff volume; lower maximum discharge during typical precipitation events; and lower runoff volume during an extreme precipitation event. Analysis of hydrologic field data in this study suggests that both the spatial distribution of stormwater BMPs and land cover are important for management of urban stormwater runoff. In particular, catchment-wide application of distributed BMPs improved stream hydrology compared to centralized BMPs, but not enough to fully replicate forested catchment stream hydrology. Integrated planning of stormwater management, protected riparian buffers and forest land cover with suburban development in the distributed-BMP catchment enabled multi-purpose use of land that provided esthetic value and green-space, community gathering points, and wildlife habitat in addition to hydrologic stormwater treatment.

Improved Design of Tunnel Supports : Volume 5 : Empirical Methods in Rock Tunneling -- Review and Recommendations

DOT National Transportation Integrated Search

1980-06-01

Volume 5 evaluates empirical methods in tunneling. Empirical methods that avoid the use of an explicit model by relating ground conditions to observed prototype behavior have played a major role in tunnel design. The main objective of this volume is ...

The role of informal dimensions of safety in high-volume organisational routines: an ethnographic study of test results handling in UK general practice.

PubMed

Grant, Suzanne; Checkland, Katherine; Bowie, Paul; Guthrie, Bruce

2017-04-27

The handling of laboratory, imaging and other test results in UK general practice is a high-volume organisational routine that is both complex and high risk. Previous research in this area has focused on errors and harm, but a complementary approach is to better understand how safety is achieved in everyday practice. This paper ethnographically examines the role of informal dimensions of test results handling routines in the achievement of safety in UK general practice and how these findings can best be developed for wider application by policymakers and practitioners. Non-participant observation was conducted of high-volume organisational routines across eight UK general practices with diverse organisational characteristics. Sixty-two semi-structured interviews were also conducted with the key practice staff alongside the analysis of relevant documents. While formal results handling routines were described similarly across the eight study practices, the everyday structure of how the routine should be enacted in practice was informally understood. Results handling safety took a range of local forms depending on how different aspects of safety were prioritised, with practices varying in terms of how they balanced thoroughness (i.e. ensuring the high-quality management of results by the most appropriate clinician) and efficiency (i.e. timely management of results) depending on a range of factors (e.g. practice history, team composition). Each approach adopted created its own potential risks, with demands for thoroughness reducing productivity and demands for efficiency reducing handling quality. Irrespective of the practice-level approach adopted, staff also regularly varied what they did for individual patients depending on the specific context (e.g. type of result, patient circumstances). General practices variably prioritised a legitimate range of results handling safety processes and outcomes, each with differing strengths and trade-offs. Future safety improvement interventions should focus on how to maximise practice-level knowledge and understanding of the range of context-specific approaches available and the safeties and risks inherent in each within the context of wider complex system conditions and interactions. This in turn has the potential to inform new kinds of proactive, contextually appropriate approaches to intervention development and implementation focusing on the enhanced deliberation of the safety of existing high-volume routines.

Driving Change in Community Colleges. Volume 1: Building Systems for Advancement to Self-Sufficiency; Volume 2: An Analysis of Change in Two Community Colleges.

ERIC Educational Resources Information Center

Liebowitz, Marty; Haynes, Leslie; Milley, Jane

This report contains two volumes: "Building Systems for Advancement to Self-Sufficiency," and "An Analysis of Change in Two Community Colleges." Volume 1 addresses the following topics: (1) the need and opportunity for change; (2) from promising practices toward systems for advancement; (3) institutional change strategies; (4) levers for…

Gasoline risk management: a compendium of regulations, standards, and industry practices.

PubMed

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

This paper is part of a special series of publications regarding gasoline toxicology testing and gasoline risk management; this article covers regulations, standards, and industry practices concerning gasoline risk management. Gasoline is one of the highest volume liquid fuel products produced globally. In the U.S., gasoline production in 2013 was the highest on record (API, 2013). Regulations such as those pursuant to the Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) and many others provide the U.S. federal government with extensive authority to regulate gasoline composition, manufacture, storage, transportation and distribution practices, worker and consumer exposure, product labeling, and emissions from engines and other sources designed to operate on this fuel. The entire gasoline lifecycle-from manufacture, through distribution, to end-use-is subject to detailed, complex, and overlapping regulatory schemes intended to protect human health, welfare, and the environment. In addition to these legal requirements, industry has implemented a broad array of voluntary standards and best management practices to ensure that risks from gasoline manufacturing, distribution, and use are minimized. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Graduated Compression Stockings for Runners: Friend, Foe, or Fake?

PubMed Central

Bovenschen, H. Jorn; te Booij, Mariëlle; van der Vleuten, Carine J. M.

2013-01-01

Objective: To assess the effect of graduated compression stockings (GCS) on lower leg volume and leg complaints in runners during and after exercise. Design: Cross-sectional study. Setting: Radboud University Nijmegen Medical Centre and an outdoor running track in Nijmegen, The Netherlands. Patients or Other Participants: Thirteen Dutch trained recreational runners. Intervention(s): Participants used a GCS on 1 leg during running. Main Outcome Measures: (1) Lower leg volume of both legs was measured at baseline, directly after running, and at 5 minutes and 30 minutes after running using a validated perometer. (2) Leg complaints were reported on questionnaires at set intervals. Results: (1) In both experiments, the legs with GCS showed a reduction in mean (± SEM) leg volume directly after running, as compared with the leg without GCS: −14.1 ± 7.6 mL (P = .04) for the 10-km running track and −53.5 ± 17.8 mL (P = .03) for the maximum exercise test. This effect was not observed at 5 and 30 minutes after running. (2) No differences in leg complaints were reported in either experiment. Conclusions: The GCS prevented an increase in leg volume just after the running exercise. However, this result was not accompanied by a reduction in subjective questionnaire-reported leg complaints. The practical consequences of the present findings need further study. PMID:23672387

Inertial Fusion Energy reactor design studies: Prometheus-L, Prometheus-H. Volume 2, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waganer, L.M.; Driemeyer, D.E.; Lee, V.D.

1992-03-01

This report contains a review of design studies for Inertial Confinement reactor. This second of three volumes discussions is some detail the following: Objectives, requirements, and assumptions; rationale for design option selection; key technical issues and R&D requirements; and conceptual design selection and description.

TEM-nanoindentation studies of semiconducting structures.

PubMed

Le Bourhis, E; Patriarche, G

2007-01-01

This paper reviews the application of nanoindentation coupled with transmission electron microscopy (TEM) to investigations of the plastic behaviour of semiconducting structures and its implication for device design. Instrumented nanoindentation has been developed to extract the mechanical behaviour of small volumes scaled to those encountered in semiconductor heterostructures. We illustrate that TEM is a powerful complementary tool for the study of local plasticity induced by nanoindentation. TEM-nanoindentation allows for detailed understanding of the plastic deformation in semiconducting structures and opens practical routes for improvement of devices. Performances of heterostructures are deteriously affected by dislocations that relax the lattice mismatched layers. Different ways to obtain compliant substructures are being developed in order to concentrate the plastic relaxation underneath the heterostructure. Such approaches allow for mechanical design of micro- and opto-electronic devices to be considered throughout the fabrication process.

A practical multilayered conducting polymer actuator with scalable work output

NASA Astrophysics Data System (ADS)

Ikushima, Kimiya; John, Stephen; Yokoyama, Kazuo; Nagamitsu, Sachio

2009-09-01

Household assistance robots are expected to become more prominent in the future and will require inherently safe design. Conducting polymer-based artificial muscle actuators are one potential option for achieving this safety, as they are flexible, lightweight and can be driven using low input voltages, unlike electromagnetic motors; however, practical implementation also requires a scalable structure and stability in air. In this paper we propose and practically implement a multilayer conducting polymer actuator which could achieve these targets using polypyrrole film and ionic liquid-soaked separators. The practical work density of a nine-layer multilayer actuator was 1.4 kJ m-3 at 0.5 Hz, when the volumes of the electrolyte and counter electrodes were included, which approaches the performance of mammalian muscle. To achieve air stability, we analyzed the effect of air-stable ionic liquid gels on actuator displacement using finite element simulation and it was found that the majority of strain could be retained when the elastic modulus of the gel was kept below 3 kPa. As a result of this work, we have shown that multilayered conducting polymer actuators are a feasible idea for household robotics, as they provide a substantial practical work density in a compact structure and can be easily scaled as required.

Breckinridge Project, initial effort. Report XI, Volume V. Critical review of the design basis. [Critical review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-01-01

Report XI, Technical Audit, is a compendium of research material used during the Initial Effort in making engineering comparisons and decisions. Volumes 4 and 5 of Report XI present those studies which provide a Critical Review of the Design Basis. The Critical Review Report, prepared by Intercontinental Econergy Associates, Inc., summarizes findings from an extensive review of the data base for the H-Coal process design. Volume 4 presents this review and assessment, and includes supporting material; specifically, Design Data Tabulation (Appendix A), Process Flow Sheets (Appendix B), and References (Appendix C). Volume 5 is a continuation of the references ofmore » Appendix C. Studies of a proprietary nature are noted and referenced, but are not included in these volumes. They are included in the Limited Access versions of these reports and may be reviewed by properly cleared personnel in the offices of Ashland Synthetic Fuels, Inc.« less

The Human as a System - Monitoring Spacecraft Net Habitable Volume throughout the Design Lifecycle

NASA Technical Reports Server (NTRS)

Szabo, Richard; Kallay, Anna; Twyford, Evan; Maida, Jim

2007-01-01

Spacecraft design has historically allocated specific volume and mass "not to exceed" requirements upon individual systems and their accompanying hardware (e.g., life support, avionics) early in their conceptual design in an effort to align the spacecraft with propulsion capabilities. If the spacecraft is too heavy or too wide for the launch stack - it does not get off the ground. This approach has predictably ended with the crew being allocated whatever open, pressurized volume remains. With the recent inauguration of a new human-rated spacecraft - NASA human factors personnel have found themselves in the unique position to redefine the human as a system from the very foundation of design. They seek to develop and monitor a "not to fall below" requirement for crew net habitable volume (NHV) - balanced against the "not to exceed" system volume requirements, with the spacecraft fitting the crew versus the crew having to fit inside the spacecraft.

Exposure and materiality of the secondary room and its impact on the impulse response of coupled-volume concert halls

NASA Astrophysics Data System (ADS)

Ermann, Michael; Johnson, Marty

2005-06-01

How does sound decay when one room is partially exposed to another (acoustically coupled)? More specifically, this research aims to quantify how operational and design decisions impact sound fields in the design of concert halls with acoustical coupling. By adding a second room to a concert hall, and designing doors to control the sonic transparency between the two rooms, designers can create a new, coupled acoustic. Concert halls use coupling to achieve a variable, longer, and distinct reverberant quality for their musicians and listeners. For this study a coupled-volume shoebox concert hall is conceived with a fixed geometric volume, form, and primary-room sound absorption. Aperture size and secondary-room sound absorption levels are established as variables. Statistical analysis of sound decay in this simulated hall suggests a highly sensitive relationship between the double-sloped condition and (1) architectural composition, as defined by the aperture size exposing the chamber and (2) materiality, as defined by the sound absorptance in the coupled volume. The theoretical, mathematical predictions are compared with coupled-volume concert hall field measurements and guidelines are suggested for future designs of coupled-volume concert halls.

Fluctuating residual limb volume accommodated with an adjustable, modular socket design: A novel case report.

PubMed

Mitton, Kay; Kulkarni, Jai; Dunn, Kenneth William; Ung, Anthony Hoang

2017-10-01

This novel case report describes the problems of prescribing a prosthetic socket in a left transfemoral amputee secondary to chronic patellofemoral instability compounded by complex regional pain syndrome. Case Description and Methods: Following the amputation, complex regional pain syndrome symptoms recurred in the residual limb, presenting mainly with oedema. Due to extreme daily volume fluctuations of the residual limb, a conventional, laminated thermoplastic socket fitting was not feasible. Findings and Outcomes: An adjustable, modular socket design was trialled. The residual limb volume fluctuations were accommodated within the socket. Amputee rehabilitation could be continued, and the rehabilitation goals were achieved. The patient was able to wear the prosthesis for 8 h daily and to walk unaided indoors and outdoors. An adjustable, modular socket design accommodated the daily residual limb volume fluctuations and provided a successful outcome in this case. It demonstrates the complexities of socket fitting and design with volume fluctuations. Clinical relevance Ongoing complex regional pain syndrome symptoms within the residual limb can lead to fitting difficulties in a conventional, laminated thermoplastic socket due to volume fluctuations. An adjustable, modular socket design can accommodate this and provide a successful outcome.

Lateral support systems and underpinning, volume I : design and construction.

DOT National Transportation Integrated Search

1976-04-01

"This volume is a convenient reference on the design and construction of lateral support systems and underpinning which are often required in conjunction with cut-and-cover or soft ground tunneling. The design recommendations and construction methods...

Machinist (AFSC 42750).

ERIC Educational Resources Information Center

Air Univ., Gunter AFS, Ala. Extension Course Inst.

This four-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for machinists. Covered in the individual volumes are machine shop fundamentals, metallurgy and advanced machine work, advanced machine work, and tool design and shop management. Each volume in the set contains a series of lessons,…

Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 5

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. There are four volumes. This volume contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. Detail drawings of several assemblies and subassemblies are given. This is the fifth book of volume 4.

Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 1

NASA Astrophysics Data System (ADS)

1984-08-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 4 contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This is the first of five books of volume four. It contains structural design criteria, generator step-up transformer specs, specs for design, fabrication and testing of the system, specs for the ground control enclosure, systems specs, slip ring specs, and control system specs.

Mod-5A Wind Turbine Generator Program Design Report. Volume 4: Drawings and Specifications, Book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 4 contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This is the first of five books of volume four. It contains structural design criteria, generator step-up transformer specs, specs for design, fabrication and testing of the system, specs for the ground control enclosure, systems specs, slip ring specs, and control system specs.

Volume accumulator design analysis computer codes

NASA Technical Reports Server (NTRS)

Whitaker, W. D.; Shimazaki, T. T.

1973-01-01

The computer codes, VANEP and VANES, were written and used to aid in the design and performance calculation of the volume accumulator units (VAU) for the 5-kwe reactor thermoelectric system. VANEP computes the VAU design which meets the primary coolant loop VAU volume and pressure performance requirements. VANES computes the performance of the VAU design, determined from the VANEP code, at the conditions of the secondary coolant loop. The codes can also compute the performance characteristics of the VAU's under conditions of possible modes of failure which still permit continued system operation.

Software Design Document SAF Workstation. Volume 1, Sections 1.0 - 2.4. 3.4.86

DTIC Science & Technology

1991-06-01

SLECT TERMS IS. NUMER OF PAGES SIMNET Software Design Document for the SAF Workstation CSCI (CSCI 6). 14. PRICE CODE SECUWItY CLASSIFICATION Is. SECUJRITY...AD-A244 972 SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86 DTIC June, 1991 Flt. FCTE S JAN 09 1992...00247 APPROVED FOR PUBLIC RELEASE DISTRBUTION UNLIMITED -Mono SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86

Comparison of urban and rural general surgeons: motivations for practice location, practice patterns, and education requirements.

PubMed

Heneghan, Steven J; Bordley, James; Dietz, Patrick A; Gold, Michael S; Jenkins, Paul L; Zuckerman, Randall J

2005-11-01

The purpose of this study is to determine the differences between rural and urban surgeons with regard to practice patterns, factors in choosing a practice location, and educational needs. A list of surgeons obtained from the American Medical Association was examined using the Office of Management and Budget definition of rural. Seventeen hundred rural surgeons were mailed surveys; 421 responded. One hundred fourteen urban surgeons were contacted by telephone. Questions were designed to measure job and community satisfaction, factors influencing their decision to practice in their current location, spectrum and volume of cases, and their perceived educational needs. Age distribution did not differ markedly between urban and rural surgeons. Motivation to practice in their current location varied considerably between urban and rural surgeons. Both groups equally rated quality of life as the leading factor influencing their current practice location. Urban surgeons rated other factors, such as income, practice growth, hospital facilities, and proximity to family, higher than rural surgeons. Practice patterns and educational needs also varied between the two groups. Rural surgeons performed more procedures per year with more variety in procedure type. Both groups felt that additional training in advanced laparoscopic techniques would be helpful, and rural surgeons felt that additional training in the surgical subspecialty areas was important. Although rural and urban surgeons do not differ in age or the importance of lifestyle in deciding career location, different factors do impact their choice of location. Practice pattern and educational needs varied markedly between rural and urban general surgeons.

Specialization and the current practices of general surgeons.

PubMed

Decker, Marquita R; Dodgion, Christopher M; Kwok, Alvin C; Hu, Yue-Yung; Havlena, Jeff A; Jiang, Wei; Lipsitz, Stuart R; Kent, K Craig; Greenberg, Caprice C

2014-01-01

The impact of specialization on the practice of general surgery has not been characterized. Our goal was to assess general surgeons' operative practices to inform surgical education and workforce planning. We examined the practices of general surgeons identified in the 2008 State Inpatient and Ambulatory Surgery Databases of the Healthcare Cost and Utilization Project for 3 US states. Operations were identified using ICD-9 and CPT codes linked to encrypted physician identifiers. For each surgeon, total operative volume and percentage of practice that made up their most common operation were calculated. Correlation was measured between general surgeons' case volume and the number of other specialists in a health service area. There were 1,075 general surgeons who performed 240,510 operations in 2008. The mean operative volume for each surgeon was 224 annual procedures. General surgeons performed an average of 23 different types of operations. For the majority of general surgeons, their most common procedure constituted no more than 30% of total practice. The most common operations, ranked by the frequency they appeared as general surgeons' top procedure, included cholecystectomy, colonoscopy, endoscopy, and skin excision. The proportion of general surgery practice composed of endoscopic procedures inversely correlated with the number of gastroenterologists in the health service area (rho = -0.50; p = 0.005). Despite trends toward specialization, the current practices of general surgeons remain heterogeneous. This indicates a continued demand for broad-based surgical education to allow future surgeons to tailor their practices to their environment. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 3

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. This volume contains the drawings and specifications developed for the final design. This volume is divided into 5 books of which this is the third, containing drawings 47A380074 through 47A380126. A full breakdown parts listing is provided as well as a where used list.

Principles of VCSEL designing

NASA Astrophysics Data System (ADS)

Nakwaski, W.

2008-03-01

Comprehensive computer simulations are currently the most efficient and cheap methods in designing and optimisation of semiconductor device structures. Seemingly they should be as exact as possible, but in practice it is well known that the most exact approaches are also the most involved and the most time-consuming ones and need powerful computers. In some cases, cheaper somewhat simplified modelling simulations are sufficiently accurate. Therefore, an appropriate modelling approach should be chosen taking into account a compromise between our needs and our possibilities. Modelling of operation and designing of structures of vertical-cavity surface-emitting diode lasers (VCSELs) requires appropriate mathematical description of physical processes crucial for devices operation, i.e., various optical, electrical, thermal, recombination and sometimes also mechanical phenomena taking place within their volumes. Equally important are mutual interactions between above individual processes, usually strongly non-linear and creating a real network of various inter-relations. Chain is as strong as its weakest link. Analogously, model is as exact as its less exact part. Therefore it is useless to improve exactness of its more accurate parts and not to care about less exact ones. All model parts should exhibit similar accuracy. In any individual case, a reasonable compromise should be reached between high modelling fidelity and its practical convenience depending on a main modelling goal, importance and urgency of expected results, available equipment and also financial possibilities. In the present paper, some simplifications used in VCSEL modelling are discussed and their impact on exactness of VCSEL designing is analysed.

Geosynchronous Microwave Atmospheric Sounding Radiometer (MASR) feasibility studies. Volume 1: Management summary

NASA Technical Reports Server (NTRS)

1978-01-01

The mission of the microwave atmospheric sounding radiometer (MASR) is to collect data to aid in the observation and prediction of severe storms. The geosynchronous orbit allows the continuous atmospheric measurement needed to resolve mesoscale dynamics. The instrument may operate in conjunction with this document, Volume 1 - Management, which summarizes the highlights of final reports on both the radiometer instrument and antenna studies. The radiometer instrument summary includes a synopsis of Volume 2 - Radiometer Receiver Feasibility, including design, recommended configuration, performance estimates, and weight and power estimates. The summary of the antenna study includes a synopsis of Volume 3 - Antenna Feasibility, including preliminary design tradeoffs, performance of selected design, and details of the mechanical/thermal design.

A custom-built PET phantom design for quantitative imaging of printed distributions.

PubMed

Markiewicz, P J; Angelis, G I; Kotasidis, F; Green, M; Lionheart, W R; Reader, A J; Matthews, J C

2011-11-07

This note presents a practical approach to a custom-made design of PET phantoms enabling the use of digital radioactive distributions with high quantitative accuracy and spatial resolution. The phantom design allows planar sources of any radioactivity distribution to be imaged in transaxial and axial (sagittal or coronal) planes. Although the design presented here is specially adapted to the high-resolution research tomograph (HRRT), the presented methods can be adapted to almost any PET scanner. Although the presented phantom design has many advantages, a number of practical issues had to be overcome such as positioning of the printed source, calibration, uniformity and reproducibility of printing. A well counter (WC) was used in the calibration procedure to find the nonlinear relationship between digital voxel intensities and the actual measured radioactive concentrations. Repeated printing together with WC measurements and computed radiography (CR) using phosphor imaging plates (IP) were used to evaluate the reproducibility and uniformity of such printing. Results show satisfactory printing uniformity and reproducibility; however, calibration is dependent on the printing mode and the physical state of the cartridge. As a demonstration of the utility of using printed phantoms, the image resolution and quantitative accuracy of reconstructed HRRT images are assessed. There is very good quantitative agreement in the calibration procedure between HRRT, CR and WC measurements. However, the high resolution of CR and its quantitative accuracy supported by WC measurements made it possible to show the degraded resolution of HRRT brain images caused by the partial-volume effect and the limits of iterative image reconstruction.

Lateral Support Systems And Underpinning. Volume I: Design And Construction

DOT National Transportation Integrated Search

1976-04-01

This volume is a convenient reference on the design and construction of lateral support systems and underpining which are often required in conjunction with cut-and-cover or soft ground tunneling. The design recommendations and construction methods d...

Use of Acoustic Emission and Pattern Recognition for Crack Detection of a Large Carbide Anvil

PubMed Central

Chen, Bin; Wang, Yanan; Yan, Zhaoli

2018-01-01

Large-volume cubic high-pressure apparatus is commonly used to produce synthetic diamond. Due to the high pressure, high temperature and alternative stresses in practical production, cracks often occur in the carbide anvil, thereby resulting in significant economic losses or even casualties. Conventional methods are unsuitable for crack detection of the carbide anvil. This paper is concerned with acoustic emission-based crack detection of carbide anvils, regarded as a pattern recognition problem; this is achieved using a microphone, with methods including sound pulse detection, feature extraction, feature optimization and classifier design. Through analyzing the characteristics of background noise, the cracked sound pulses are separated accurately from the originally continuous signal. Subsequently, three different kinds of features including a zero-crossing rate, sound pressure levels, and linear prediction cepstrum coefficients are presented for characterizing the cracked sound pulses. The original high-dimensional features are adaptively optimized using principal component analysis. A hybrid framework of a support vector machine with k nearest neighbors is designed to recognize the cracked sound pulses. Finally, experiments are conducted in a practical diamond workshop to validate the feasibility and efficiency of the proposed method. PMID:29382144

Use of Acoustic Emission and Pattern Recognition for Crack Detection of a Large Carbide Anvil.

PubMed

Chen, Bin; Wang, Yanan; Yan, Zhaoli

2018-01-29

Large-volume cubic high-pressure apparatus is commonly used to produce synthetic diamond. Due to the high pressure, high temperature and alternative stresses in practical production, cracks often occur in the carbide anvil, thereby resulting in significant economic losses or even casualties. Conventional methods are unsuitable for crack detection of the carbide anvil. This paper is concerned with acoustic emission-based crack detection of carbide anvils, regarded as a pattern recognition problem; this is achieved using a microphone, with methods including sound pulse detection, feature extraction, feature optimization and classifier design. Through analyzing the characteristics of background noise, the cracked sound pulses are separated accurately from the originally continuous signal. Subsequently, three different kinds of features including a zero-crossing rate, sound pressure levels, and linear prediction cepstrum coefficients are presented for characterizing the cracked sound pulses. The original high-dimensional features are adaptively optimized using principal component analysis. A hybrid framework of a support vector machine with k nearest neighbors is designed to recognize the cracked sound pulses. Finally, experiments are conducted in a practical diamond workshop to validate the feasibility and efficiency of the proposed method.

A Comparison of Regional and SiteSpecific Volume Estimation Equations

Treesearch

Joe P. McClure; Jana Anderson; Hans T. Schreuder

1987-01-01

Regression equations for volume by region and site class were examined for lobiolly pine. The regressions for the Coastal Plain and Piedmont regions had significantly different slopes. The results shared important practical differences in percentage of confidence intervals containing the true total volume and in percentage of estimates within a specific proportion of...

Potential means of cost reduction in grade crossing automatic gate systems. volume II : improved gate arm concepts for railroad/highway grade crossings gate systems

DOT National Transportation Integrated Search

1977-02-28

This report, Volume II of a two-volume study, examines the potential for reduction of the cost of installing and maintaining automatic gates at railroad-highway grade crossings. It includes a review of current practices, equipment, and standards; con...

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

Highway Safety Program Manual: Volume 15: Police Traffic Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 15 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on police traffic services. The purpose and objectives of a police services program are described. Federal authority in the areas of highway safety and policies regarding a police traffic…

Potential means of cost reduction in grade crossing automatic gate systems. volume I : overview and low cost railroad/highway grade crossing gate systems

DOT National Transportation Integrated Search

1977-02-28

This report, Volume I of a two-volume study, examines the potential for reduction of the cost of installing and maintaining automatic gates at railroad-highway grade crossings. It comprises a general overview; a review of current practices, equipment...

Highway Safety Program Manual: Volume 11: Emergency Medical Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 11 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on emergency medical services. The purpose of the program, Federal authority in the area of medical services, and policies related to an emergency medical services (EMS) program are…

Highway Safety Program Manual: Volume 6: Codes and Laws.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

Classroom Reading Specialist Program. Year-end Report. Volume III.

ERIC Educational Resources Information Center

Earle, Richard; And Others

As the third in a four volume final report of a Right to Read preservice competency-based, modular reading specialist project, this volume presents the module outlines for components seven, eight and nine of the classroom program. Component seven, administration and supervision, offers on-the-job practical training where students experience…

High Case Volumes and Surgical Fellowships are Associated with Improved Outcomes for Bariatric Surgery Patients: A Justification of Current Credentialing Initiatives for Practice and Training

PubMed Central

Kohn, Geoffrey P; Galanko, Joseph A; Overby, D Wayne; Farrell, Timothy M

2010-01-01

Background Recent years have seen the establishment of bariatric surgery credentialing processes, centers-of-excellence programs and fellowship training positions. The effects of center-of-excellence status and of the presence of training programs have not previously been examined. The objective of this study is to examine the effects of case volume, center-of-excellence status and training programs on early outcomes of bariatric surgery. Study Design Data were obtained from the Nationwide Inpatient Sample from 1998 to 2006. Quantification of patients’ comorbidities was made using the Charlson Index. Using logistic regression modeling, annual case volumes were analyzed for an association with each institution’s center-of-excellence status and training program status. Risk-adjusted outcome measures were calculated for these hospital-level parameters. Results Data from 102,069 bariatric operations were obtained. Adjusting for comorbidities, greater bariatric case volume was associated with improvements in the incidence of total complications (odds ratio [OR] = 0.99937 for each single case increase, p=0.01), in-hospital mortality (OR = 0.99717, p<0.01), and most other complications. Hospitals with a Fellowship Council-affiliated gastrointestinal surgery training program were associated with risk-adjusted improvements in rates of splenectomy (OR = 0.2853, p<0.001) and bacterial pneumonias (OR = 0.65898, p=0.02). Center-of-excellence status, irrespective of the accrediting entity, had minimal independent association with outcome. A surgical residency program had a varying association with outcomes. Conclusions The hypothesized positive volume-outcome relationship of bariatric surgery is shown without arbitrarily categorizing hospitals to case volume groups, by analysis of volume as a continuous variable. Institutions with a dedicated fellowship training program have also been shown, in part, to be associated with improved outcomes. The concept of volume-dependent center-of-excellence programs is supported, though no independent association with the credentialing process is noted. PMID:20510799

Crop Identification Technolgy Assessment for Remote Sensing (CITARS). Volume 1: Task design plan

NASA Technical Reports Server (NTRS)

Hall, F. G.; Bizzell, R. M.

1975-01-01

A plan for quantifying the crop identification performances resulting from the remote identification of corn, soybeans, and wheat is described. Steps for the conversion of multispectral data tapes to classification results are specified. The crop identification performances resulting from the use of several basic types of automatic data processing techniques are compared and examined for significant differences. The techniques are evaluated also for changes in geographic location, time of the year, management practices, and other physical factors. The results of the Crop Identification Technology Assessment for Remote Sensing task will be applied extensively in the Large Area Crop Inventory Experiment.

Numerical simulation of air hypersonic flows with equilibrium chemical reactions

NASA Astrophysics Data System (ADS)

Emelyanov, Vladislav; Karpenko, Anton; Volkov, Konstantin

2018-05-01

The finite volume method is applied to solve unsteady three-dimensional compressible Navier-Stokes equations on unstructured meshes. High-temperature gas effects altering the aerodynamics of vehicles are taken into account. Possibilities of the use of graphics processor units (GPUs) for the simulation of hypersonic flows are demonstrated. Solutions of some test cases on GPUs are reported, and a comparison between computational results of equilibrium chemically reacting and perfect air flowfields is performed. Speedup of solution on GPUs with respect to the solution on central processor units (CPUs) is compared. The results obtained provide promising perspective for designing a GPU-based software framework for practical applications.

A Solution Adaptive Technique Using Tetrahedral Unstructured Grids

NASA Technical Reports Server (NTRS)

Pirzadeh, Shahyar Z.

2000-01-01

An adaptive unstructured grid refinement technique has been developed and successfully applied to several three dimensional inviscid flow test cases. The method is based on a combination of surface mesh subdivision and local remeshing of the volume grid Simple functions of flow quantities are employed to detect dominant features of the flowfield The method is designed for modular coupling with various error/feature analyzers and flow solvers. Several steady-state, inviscid flow test cases are presented to demonstrate the applicability of the method for solving practical three-dimensional problems. In all cases, accurate solutions featuring complex, nonlinear flow phenomena such as shock waves and vortices have been generated automatically and efficiently.

Validated School Business Practices That Work. Volume III: Sharing Business Success.

ERIC Educational Resources Information Center

Association of School Business Officials of the United States and Canada, Park Ridge, IL. Research Corp.

Seventeen validated school business practices are described in this document. The practices were selected through the Sharing Business Success (SBS) program, in which the Federal Department of Education, 41 state education agencies, and State Associations of School Business Officials cooperate to identify successful school district practices,…

Microfluidic Dynamic Interfacial Tensiometry (μDIT).

PubMed

Brosseau, Quentin; Vrignon, Jérémy; Baret, Jean-Christophe

2014-05-07

We designed, developed and characterized a microfluidic method for the measurement of surfactant adsorption kinetics via interfacial tensiometry on a microfluidic chip. The principle of the measurement is based on the deformability of droplets as a response to hydrodynamic forcing through a series of microfluidic expansions. We focus our analysis on one perfluoro surfactant molecule of practical interest for droplet-based microfluidic applications. We show that although the adsorption kinetics is much faster than the kinetics of the corresponding pendant drop experiment, our droplet-based microfluidic system has a sufficient time resolution to obtain quantitative measurement at the sub-second time-scale on nanoliter droplet volumes, leading to both a gain by a factor of ∼10 in time resolution and a downscaling of the measurement volumes by a factor of ∼1000 compared to standard techniques. Our approach provides new insight into the adsorption of surfactant molecules at liquid-liquid interfaces in a confined environment, relevant to emulsification, encapsulation and foaming, and the ability to measure adsorption and desorption rate constants.

Energy law service. Volume 2. Monographs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, H.P.

1978-01-01

This volume (a companion to the Energy Guide, Vol. 1) contains the following: Monograph 1A - The National Energy Act; Monograph 3A - The Surface Mining Control and Reclamation Act; Monograph 4A - Gasoline: regulation of price and supply; Monograph 5A - Electric utility rate design; Monograph 6A - Nuclear export control; Monograph 6B - Nuclear Regulatory Commission practice and procedure; Monograph 6C - The Three Mile Island episode: liability and financial implications; Monograph 8A - The Environmental Policy Act; Monograph 10A - Collection and analysis of energy information by the Federal Government; Monograph 11A - Management of energy resourcesmore » on Federal lands; Monograph 12A - Regulation of costs under Department of Energy contracts; Monograph 13A - Foreign investment in United States energy resources; and Monograph 14A - Transportation of energy resources. In addition, a Supplement published July 1979, with updated information on Monographs 4A, 5A, 6B, 10A, 11A, and 12A is included.« less

High order finite volume WENO schemes for the Euler equations under gravitational fields

NASA Astrophysics Data System (ADS)

Li, Gang; Xing, Yulong

2016-07-01

Euler equations with gravitational source terms are used to model many astrophysical and atmospheric phenomena. This system admits hydrostatic balance where the flux produced by the pressure is exactly canceled by the gravitational source term, and two commonly seen equilibria are the isothermal and polytropic hydrostatic solutions. Exact preservation of these equilibria is desirable as many practical problems are small perturbations of such balance. High order finite difference weighted essentially non-oscillatory (WENO) schemes have been proposed in [22], but only for the isothermal equilibrium state. In this paper, we design high order well-balanced finite volume WENO schemes, which can preserve not only the isothermal equilibrium but also the polytropic hydrostatic balance state exactly, and maintain genuine high order accuracy for general solutions. The well-balanced property is obtained by novel source term reformulation and discretization, combined with well-balanced numerical fluxes. Extensive one- and two-dimensional simulations are performed to verify well-balanced property, high order accuracy, as well as good resolution for smooth and discontinuous solutions.

West coast RFI survey, volume 1, volume 2 appendix E, volume 3 appendix F, volume 4 appendix G, and volume 5 appendix H

NASA Technical Reports Server (NTRS)

Deutsch, W. F.

1972-01-01

Activities and data reported cover experimental design, mechanization onboard the aircraft, survey operations, quick look and automated data reduction, and a qualitative comparison of survey data with predicted values for the radio frequency survey. The survey was designed to measure amplitude, frequency and time of occurrence of terrestrial emissions in the VHF band during overflights of heavily populated metropolitan areas located on the Pacific Coast of the Continental United States by sensing and recording equipment installed in jet aircraft.

Feasibility study of modern airships, phase 1, volume 1. [structural design criteria/technology assessment

NASA Technical Reports Server (NTRS)

Joner, B.

1975-01-01

The history of the airship is examined from a technical and operational/mission point of view. The impact on a modern airship design by present technology is defined in some selected, representative areas through a comparison between 1930 and 1975 state-of-the-art. A survey of missions with a potential for the airship was made and some viable applications are established. Several concepts of modern airships were taken through a parametric design analysis in the missions previously established, evolving in a new configuration of a hybrid airship - the Helipsoid -, combining static lift and dynamic lift from tilting propeller/rotors and the planform. Cruise speeds in the 150-200 kt (77-103 m/s) will be possible with this configuration with reasonable engine power. The Helipsoid offers at the same time a realistic and practicable solution to the ballast problem, which is inherent in a vehicle generating its lift (fully or partially) from a medium lighter than air.

The effects of load history and design variables on performance limit states of circular bridge columns - volume 2 : experimental observations.

DOT National Transportation Integrated Search

2015-01-01

This report is the second of three volumes and presents detailed data and test summaries of the experimental portion of the work. In total : 30 large scale reinforced concrete bridge columns are reported in this volume. Recommendations for design and...

Spaceflight Human System Standards

NASA Technical Reports Server (NTRS)

Holubec, Keith; Tillman, Barry; Connolly, Jan

2009-01-01

NASA created a new approach for human system integration and human performance standards. NASA created two documents a standard and a reference handbook. The standard is titled NASA Space Flight Human-System Standard (SFHSS) and consists of two-volumes: Volume 1- Crew Health This volume covers standards needed to support astronaut health (medical care, nutrition, sleep, exercise, etc.) Volume 2 Human Factors, Habitability and Environmental Health This volume covers the standards for system design that will maintain astronaut performance (ie., environmental factors, design of facilities, layout of workstations, and lighting requirements). It includes classic human factors requirements. The new standards document is written in terms so that it is applicable to a broad range of present and future NASA systems. The document states that all new programs prepare system-specific requirements that will meet the general standards. For example, the new standard does not specify a design should accommodate specific percentiles of a defined population. Rather, NASA-STD-3001, Volume 2 states that all programs shall prepare program-specific requirements that define the user population and their size ranges. The design shall then accommodate the full size range of those users. The companion reference handbook, Human Integration Design Handbook (HIDH), was developed to capture the design consideration information from NASA-STD-3000, and adds spaceflight lessons learned, gaps in knowledge, example solutions, and suggests research to further mature specific disciplines. The HIDH serves two major purposes: HIDH is the reference document for writing human factors requirements for specific systems. HIDH contains design guidance information that helps insure that designers create systems which safely and effectively accommodate the capabilities and limitations of space flight crews.

Characterization and optimization of cell seeding in scaffolds by factorial design: quality by design approach for skeletal tissue engineering.

PubMed

Chen, Yantian; Bloemen, Veerle; Impens, Saartje; Moesen, Maarten; Luyten, Frank P; Schrooten, Jan

2011-12-01

Cell seeding into scaffolds plays a crucial role in the development of efficient bone tissue engineering constructs. Hence, it becomes imperative to identify the key factors that quantitatively predict reproducible and efficient seeding protocols. In this study, the optimization of a cell seeding process was investigated using design of experiments (DOE) statistical methods. Five seeding factors (cell type, scaffold type, seeding volume, seeding density, and seeding time) were selected and investigated by means of two response parameters, critically related to the cell seeding process: cell seeding efficiency (CSE) and cell-specific viability (CSV). In addition, cell spatial distribution (CSD) was analyzed by Live/Dead staining assays. Analysis identified a number of statistically significant main factor effects and interactions. Among the five seeding factors, only seeding volume and seeding time significantly affected CSE and CSV. Also, cell and scaffold type were involved in the interactions with other seeding factors. Within the investigated ranges, optimal conditions in terms of CSV and CSD were obtained when seeding cells in a regular scaffold with an excess of medium. The results of this case study contribute to a better understanding and definition of optimal process parameters for cell seeding. A DOE strategy can identify and optimize critical process variables to reduce the variability and assists in determining which variables should be carefully controlled during good manufacturing practice production to enable a clinically relevant implant.

Uniform field loop-gap resonator and rectangular TEU02 for aqueous sample EPR at 94 GHz

NASA Astrophysics Data System (ADS)

Sidabras, Jason W.; Sarna, Tadeusz; Mett, Richard R.; Hyde, James S.

2017-09-01

In this work we present the design and implementation of two uniform-field resonators: a seven-loop-six-gap loop-gap resonator (LGR) and a rectangular TEU02 cavity resonator. Each resonator has uniform-field-producing end-sections. These resonators have been designed for electron paramagnetic resonance (EPR) of aqueous samples at 94 GHz. The LGR geometry employs low-loss Rexolite end-sections to improve the field homogeneity over a 3 mm sample region-of-interest from near-cosine distribution to 90% uniform. The LGR was designed to accommodate large degassable Polytetrafluorethylen (PTFE) tubes (0.81 mm O.D.; 0.25 mm I.D.) for aqueous samples. Additionally, field modulation slots are designed for uniform 100 kHz field modulation incident at the sample. Experiments using a point sample of lithium phthalocyanine (LiPC) were performed to measure both the uniformity of the microwave magnetic field and 100 kHz field modulation, and confirm simulations. The rectangular TEU02 cavity resonator employs over-sized end-sections with sample shielding to provide an 87% uniform field for a 0.1 × 2 × 6 mm3 sample geometry. An evanescent slotted window was designed for light access to irradiate 90% of the sample volume. A novel dual-slot iris was used to minimize microwave magnetic field perturbations and maintain cross-sectional uniformity. Practical EPR experiments using the application of light irradiated rose bengal (4,5,6,7-tetrachloro-2‧,4‧,5‧,7‧-tetraiodofluorescein) were performed in the TEU02 cavity. The implementation of these geometries providing a practical designs for uniform field resonators that continue resonator advancements towards quantitative EPR spectroscopy.

Evaluating the effectiveness of management practices on hydrology and water quality at watershed scale with a rainfall-runoff model.

PubMed

Liu, Yaoze; Bralts, Vincent F; Engel, Bernard A

2015-04-01

The adverse influence of urban development on hydrology and water quality can be reduced by applying best management practices (BMPs) and low impact development (LID) practices. This study applied green roof, rain barrel/cistern, bioretention system, porous pavement, permeable patio, grass strip, grassed swale, wetland channel, retention pond, detention basin, and wetland basin, on Crooked Creek watershed. The model was calibrated and validated for annual runoff volume. A framework for simulating BMPs and LID practices at watershed scales was created, and the impacts of BMPs and LID practices on water quantity and water quality were evaluated with the Long-Term Hydrologic Impact Assessment-Low Impact Development 2.1 (L-THIA-LID 2.1) model for 16 scenarios. The various levels and combinations of BMPs/LID practices reduced runoff volume by 0 to 26.47%, Total Nitrogen (TN) by 0.30 to 34.20%, Total Phosphorus (TP) by 0.27 to 47.41%, Total Suspended Solids (TSS) by 0.33 to 53.59%, Lead (Pb) by 0.30 to 60.98%, Biochemical Oxygen Demand (BOD) by 0 to 26.70%, and Chemical Oxygen Demand (COD) by 0 to 27.52%. The implementation of grass strips in 25% of the watershed where this practice could be applied was the most cost-efficient scenario, with cost per unit reduction of $1m3/yr for runoff, while cost for reductions of two pollutants of concern was $445 kg/yr for Total Nitrogen (TN) and $4871 kg/yr for Total Phosphorous (TP). The scenario with very high levels of BMP and LID practice adoption (scenario 15) reduced runoff volume and pollutant loads from 26.47% to 60.98%, and provided the greatest reduction in runoff volume and pollutant loads among all scenarios. However, this scenario was not as cost-efficient as most other scenarios. The L-THIA-LID 2.1 model is a valid tool that can be applied to various locations to help identify cost effective BMP/LID practice plans at watershed scales. Copyright © 2014 Elsevier B.V. All rights reserved.

Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 4

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator are documented. There are four volumes. This volume contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This volume contains 5 books of which this is the fourth, providing drawings 47A380128 through 47A387125. In addition to the parts listing and where-used list, the logic design of the controller software and the code listing of the controller software are provided. Also given are the aerodynamic profile coordinates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In 1990, the Lower Savannah Council of Governments (LSCOG) began dialogue with the United States Department of Energy (DOE) regarding possibilities for cooperation and coordination of solid waste management practices among the local governments and the Savannah River Site. The Department of Energy eventually awarded a grant to the Lower Savannah Council of Governments for the development of a study, which was initiated on March 5, 1992. After careful analysis of the region`s solid waste needs, this study indicates a network approach to solid waste management to be the most viable. The network involves the following major components: (1) Ruralmore » Collection Centers, designed to provide convenience to rural citizens, while allowing some degree of participation in recycling; (2) Rural Drop-Off Centers, designed to give a greater level of education and recycling activity; (3) Inert landfills and composting centers, designed to reduce volumes going into municipal (Subtitle D) landfills and produce useable products from yard waste; (4) Transfer Stations, ultimate landfill disposal; (5) Materials Recovery Facilities, designed to separate recyclables into useable and sellable units, and (6) Subtitle D landfill for burial of all solid waste not treated through previous means.« less

Electro-optic product design for manufacture: where next?

NASA Astrophysics Data System (ADS)

Barr, John R. M.; MacDonald, M.; Jeffery, G.; Troughton, M.

2016-10-01

Manufacturing of electro-optic products for military environments poses a large number of apparently intractable and mutually contradictory problems. The ability to successfully engage in this area presents an intellectual challenge of a high order. The Advanced Targeting Sector of Leonardo's Airborne and Space Systems Division, based in Edinburgh, has developed a successful range of electro-optic products and transitioned these into a volume, and high value, manufacturing environment. As products cycle through the design process, there has been strong feedback from users, suppliers, and most importantly from our manufacturing organization, that has driven evolution of our design practices. It is fair to say that recent pointer trackers and lasers bear little resemblance to those designed and built 10 years ago. Looking ahead, this process will only continue. There are interesting technologies that will drive improvements in manufacturability, reliability and usability of electro-optic products. Examples might include freeform optics, additive manufacture of metal components, and laser welding of optics to metals, to name but a few. These have uses across our product portfolio and, when sufficiently matured, will have a major impact on the product quality and reliability

Impact of Node Negative Target Volume Delineation on Contralateral Parotid Gland Dose Sparing Using IMRT in Head and Neck Cancer.

PubMed

Magnuson, William J; Urban, Erich; Bayliss, R Adam; Harari, Paul M

2015-06-01

There is considerable practice variation in treatment of the node negative (N0) contralateral neck in patients with head and neck cancer. In this study, we examined the impact of N0 neck target delineation volume on radiation dose to the contralateral parotid gland. Following institutional review board approval, 12 patients with head and neck cancer were studied. All had indications for treatment of the N0 neck, such as midline base of tongue or soft palate extension or advanced ipsilateral nodal disease. The N0 neck volumes were created using the Radiation Therapy Oncology Group head and neck contouring atlas. The physician-drawn N0 neck clinical target volume (CTV) was expanded by 25% to 200% to generate volume variation, followed by a 3-mm planning target volume (PTV) expansion. Surrounding organs at risk were contoured and complete intensity-modulated radiation therapy plans were generated for each N0 volume expansion. The median N0 target volume drawn by the radiation oncologist measured 93 cm(3) (range 71-145). Volumetric expansion of the N0 CTV by 25% to 200% increased the resultant mean dose to the contralateral parotid gland by 1.4 to 8.5 Gray (Gy). For example, a 4.1-mm increase in the N0 neck CTV translated to a 2.0-Gy dose increase to the parotid, 7.4 mm to a 4.5 Gy dose increase, and 12.5 mm to an 8.5 Gy dose increase, respectively. The treatment volume designated for the N0 neck has profound impact on resultant dose to the contralateral parotid gland. Variations of up to 15 mm are routine across physicians in target contouring, reflecting individual preference and training expertise. Depending on the availability of immobilization and image guidance techniques, experts commonly recommend 3 to 10 mm margin expansions to generate the PTV. Careful attention to the original volume of the N0 neck CTV, as well as expansion margins, is important in achieving effective contralateral gland sparing to reduce the resultant xerostomia and dysguesia that may ensue after radiotherapy. © The Author(s) 2014.

Low-volume road engineering : Best Management Practices : Field Guide

DOT National Transportation Integrated Search

2003-07-01

Improperly constructed roads can negatively impact everything from terrestrial plant populations and soil conservation efforts to water quality and populations of aquatic organisms in receiving waters. This Low-Volume Roads Engineering Best Managemen...

Quality versus Quantity Debate in Swimming: Perceptions and Training Practices of Expert Swimming Coaches.

PubMed

Nugent, Frank J; Comyns, Thomas M; Warrington, Giles D

2017-06-01

The debate over low-volume, high-intensity training versus high-volume, low-intensity training, commonly known as Quality versus Quantity, respectively, is a frequent topic of discussion among swimming coaches and academics. The aim of this study was to explore expert coaches' perceptions of quality and quantity coaching philosophies in competitive swimming and to investigate their current training practices. A purposeful sample of 11 expert swimming coaches was recruited for this study. The study was a mixed methods design and involved each coach participating in 1 semi-structured interview and completing 1 closed-ended questionnaire. The main findings of this study were that coaches felt quality training programmes would lead to short term results for youth swimmers, but were in many cases more appropriate for senior swimmers. The coaches suggested that quantity training programmes built an aerobic base for youth swimmers, promoted technical development through a focus on slower swimming and helped to enhance recovery from training or competition. However, the coaches continuously suggested that quantity training programmes must be performed with good technique and they felt this was a misunderstood element. This study was a critical step towards gaining a richer and broader understanding on the debate over Quality versus Quantity training from an expert swimming coaches' perspective which was not currently available in the research literature.

Quality versus Quantity Debate in Swimming: Perceptions and Training Practices of Expert Swimming Coaches

PubMed Central

Nugent, Frank J; Comyns, Thomas M; Warrington, Giles D

2017-01-01

Abstract The debate over low-volume, high-intensity training versus high-volume, low-intensity training, commonly known as Quality versus Quantity, respectively, is a frequent topic of discussion among swimming coaches and academics. The aim of this study was to explore expert coaches’ perceptions of quality and quantity coaching philosophies in competitive swimming and to investigate their current training practices. A purposeful sample of 11 expert swimming coaches was recruited for this study. The study was a mixed methods design and involved each coach participating in 1 semi-structured interview and completing 1 closed-ended questionnaire. The main findings of this study were that coaches felt quality training programmes would lead to short term results for youth swimmers, but were in many cases more appropriate for senior swimmers. The coaches suggested that quantity training programmes built an aerobic base for youth swimmers, promoted technical development through a focus on slower swimming and helped to enhance recovery from training or competition. However, the coaches continuously suggested that quantity training programmes must be performed with good technique and they felt this was a misunderstood element. This study was a critical step towards gaining a richer and broader understanding on the debate over Quality versus Quantity training from an expert swimming coaches’ perspective which was not currently available in the research literature. PMID:28713467

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 7: System/subsystem requirements data book

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Volume 7 of the Satellite Power Systems (SPS) Concept Definition Study final report summarizes the basic requirements used as a guide to systems analysis and is a basis for the selection of candidate SPS point design(s). Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point design(s). The identified subsystem/systems requirements are defined, and where appropriate, recommendations for alternate approaches which may represent improved design features are presented. A more detailed discussion of the selected point design(s) will be found in Volume 2 of this report.

Highway Safety Program Manual: Volume 16: Debris Hazard Control and Cleanup.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 16 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on debris hazard control and cleanup. The purpose and objectives of such a program are outlined. Federal authority in the area of highway safety and policies regarding a debris control…

Managing Leaf Area for Maximum Volume Production in a Loblolly Pine Plantation

Treesearch

Shufang Yu; Quang V. Cao; Jim L. Chambers; Zhenmin Tang; James D. Haywood

1999-01-01

To manage loblolly pine (Pinus taeda L.) stands for maximum volume growth, the relationships between volume growth and leaf area at the tree and stand level under different cultural practices (thinning and fertilization) were examined. Forty-eight trees were harvested in 1995, six years after treatment, for individual tree measurements, and 336...

Behavioral Disorders: Practice Concerns and Students with EBD. Advances in Special Education. Volume 23

ERIC Educational Resources Information Center

Bakken, Jeffrey P., Ed.; Obiakor, Festus E., Ed.; Rotatori, Anthony F., Ed.

2012-01-01

Volumes 22 and 23 of the "Advances in Special Education" address the current top perspectives and issues in the field of emotional and behavioral disorders (EBD) by providing chapters written by active researchers and scholarly university professors who specialize in this area. Volume 22 first delineates legal issues, themes, and dimensions…

Maryland English Journal. Volume 28, Numbers 1-2, Fall 1993 and Spring 1994.

ERIC Educational Resources Information Center

Pula, Judith J., Ed.

1993-01-01

A semi-annual refereed publication of research and instructional practices in English/language arts and allied fields, preschool through adult levels, this volume of "Maryland English Journal" presents articles on a variety of subjects and showcases the work of young writers. Articles in volume 28, number 1 focus on ethnographic studies…

Feedback to Managers, Volume II: A Review and Comparison of Sixteen Multi-Rater Feedback Instruments.

ERIC Educational Resources Information Center

Van Velsor, Ellen; Leslie, Jean Brittain

"Feedback to Managers" is a two-volume report. Volume 2 compares 16 of the better feedback instruments available. The following are the instruments: (1) ACUMEN Group Feedback; (2) BENCHMARKS; (3) the Campbell Leadership Index; (4) COMPASS: the Managerial Practices Survey; (5) the Executive Success Profile; (6) Leader Behavior Analysis…

Current Scientific Approaches to Decision Making in Complex Systems. 3. Volume 2. Conference Position Papers

DTIC Science & Technology

1980-01-01

Search: Traffic on a Multi- dimensional Structure R. i. Atkin, University of Essex, England b. Annex. Volume 3: Decision: Foundation and Practice Brian R...Gaines, University of Essex, England Volume 4: Competing Modes of Cognition and Communication in Simulated and Self-Reflective Systems Stein Braten... University of Oslo, Norway Volume 5: On the Spontaneous Emergence of Decision Making Constraints in Communicating Hierarchical Structure John S

Democratic Practices in Education: Implications for Teacher Education

ERIC Educational Resources Information Center

Pearl, Art, Ed.; Pryor, Caroline R., Ed.

2005-01-01

This book presents the findings of eleven teacher educators as they examine the meaning of democracy and its application to classroom practice. There is a shared belief among all contributors to this volume: that incorporating democratic practice into teacher education is an essential requirement to introducing democratic practices in K-12…

Aggression and Young Children. Research in Practice Series. Volume 11, Number 1

ERIC Educational Resources Information Center

Szarkowicz, Diane Louise

2004-01-01

The "Research in Practice Series" is a practical, easy-to-read resource, offering effective new approaches for those challenging issues which arise in the care and education of young children. Early Childhood Australia's "Research in Practice Series" is an essential resource for those involved in the early childhood field.…

40 CFR 1051.635 - What provisions apply to new manufacturers that are small businesses?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Act. For example, we may place sales limits on companies that we designate to be small-volume....201) that manufactures recreational vehicles, but does not otherwise qualify for the small-volume manufacturer provisions of this part, you may ask us to designate you to be a small-volume manufacturer. You...

New York State Educational Information System (NYSEIS) Systems Design. Volume I, Phase II. Final Report.

ERIC Educational Resources Information Center

Price Waterhouse and Co., New York, NY.

This volume on Phase II of the New York State Educational Information System (NYSEIS) describes the Gross Systems Analysis and Design, which includes the general flow diagram and processing chart for each of the student, personnel, and financial subsystems. Volume II, Functional Specifications, includes input/output requirements and file…

Locomotive cab design development. volume III: design application analysis - Interim report

DOT National Transportation Integrated Search

1976-10-01

In Volume II of this service of reports on Locomotive Cab Design Development, changes were recommended in the layout and equipment content of locomotive cabs. This report studies the impact of these changes on the interface of the cab with the rest o...

Development and Design of Zero-g Liquid Quantity Gauge for Solar Thermal Vehicle

NASA Technical Reports Server (NTRS)

Dodge, Franklin T.; Green, Steven T.; Petullo, Steven P.; VanDresar, Neil T.

2002-01-01

The development and design of a cryogenic liquid quantity gauge for zero-gravity (zero-g) applications are described. The gauge, named the compression mass gauge (CMG), operates on the principle of slightly changing the volume of the tank by an oscillating bellows. The resulting pressure change is measured and used to predict the volume of vapor in the tank, from which the volume of liquid is computed. For each gauging instance, pressures are measured for several different bellows frequencies to enable minor real-gas effects to be quantified and thereby to obtain a gauging accuracy of 11 percent of tank volume. The CMG has been selected by NASA's Future-X program for a flight demonstration on the United States Air Force-Boeing Solar Orbit Transfer Vehicle Space Experiment (SOTVSE). This report reviews the design trade studies needed for the CMG to satisfy the SOTVSE limitations on its power, volume, and mass and also describes the mechanical design of the CMG.

Network Aggregation in Transportation Planning : Volume I : Summary and Survey

DOT National Transportation Integrated Search

1978-04-01

Volume 1 summarizes research on network aggregation in transportation models. It includes a survey of network aggregation practices, definition of an extraction aggregation model, computational results on a heuristic implementation of the model, and ...

Wayside Energy Storage Study : Volume 1. Summary.

DOT National Transportation Integrated Search

1979-02-01

Volume I summarizes an in-depth application study which was conducted to determine the practicality and viability of using large wayside flywheels to recuperate braking energy from freight trains on long downgrades. The study examined the route struc...

The effect of water volume and mixing time on physical properties of bread made from modified cassava starch-wheat composite flour

NASA Astrophysics Data System (ADS)

Srirejeki, S.; Manuhara, G. J.; Amanto, B. S.; Atmaka, W.; Laksono, P. W.

2018-03-01

Modification of cassava starch with soaking in the whey (by product on cheese production) resulted in changes of the flour characteristics. Adjustments of processing condition are important to be studied in the making of bread from modified cassava starch and wheat composite flour (30:70). This research aims to determine the effect of water volume and mixing time on the physical properties of the bread. The experimental design of this research was Completely Randomized Factorial Design (CRFD) with two factors which were water volume and mixing time. The variation of water volume significantly affected on bread height, dough volume, dough specific volume, and crust thickness. The variation of mixing time had a significant effect on the increase of dough volume and dough specific volume. The combination of water volume and mixing time had a significant effect on dough height, bread volume, bread specific volume, baking expansion, and weight loss.

Methods for implementing a medicine outlet survey: lessons from the anti-malarial market.

PubMed

O'Connell, Kathryn A; Poyer, Stephen; Solomon, Tsione; Munroe, Erik; Patouillard, Edith; Njogu, Julius; Evance, Illah; Hanson, Kara; Shewchuk, Tanya; Goodman, Catherine

2013-02-05

In recent years an increasing number of public investments and policy changes have been made to improve the availability, affordability and quality of medicines available to consumers in developing countries, including anti-malarials. It is important to monitor the extent to which these interventions are successful in achieving their aims using quantitative data on the supply side of the market. There are a number of challenges related to studying supply, including outlet sampling, gaining provider cooperation and collecting accurate data on medicines. This paper provides guidance on key steps to address these issues when conducting a medicine outlet survey in a developing country context. While the basic principles of good survey design and implementation are important for all surveys, there are a set of specific issues that should be considered when conducting a medicine outlet survey. This paper draws on the authors' experience of designing and implementing outlet surveys, including the lessons learnt from ACTwatch outlet surveys on anti-malarial retail supply, and other key studies in the field. Key lessons and points of debate are distilled around the following areas: selecting a sample of outlets; techniques for collecting and analysing data on medicine availability, price and sales volumes; and methods for ensuring high quality data in general. The authors first consider the inclusion criteria for outlets, contrasting comprehensive versus more focused approaches. Methods for developing a reliable sampling frame of outlets are then presented, including use of existing lists, key informants and an outlet census. Specific issues in the collection of data on medicine prices and sales volumes are discussed; and approaches for generating comparable price and sales volume data across products using the adult equivalent treatment dose (AETD) are explored. The paper concludes with advice on practical considerations, including questionnaire design, field worker training, and data collection. Survey materials developed by ACTwatch for investigating anti-malarial markets in sub-Saharan Africa and Asia provide a helpful resource for future studies in this area.

Use of a geomorphological transfer function to model design floods in small hillside catchments in semiarid Tunisia

NASA Astrophysics Data System (ADS)

Nasri, S.; Cudennec, C.; Albergel, J.; Berndtsson, R.

2004-02-01

In the beginning of the 1990s, the Tunisian Ministry of Agriculture launched an ambitious program for constructing small hillside reservoirs in the northern and central region of the country. At present, more than 720 reservoirs have been created. They consist of small compacted earth dams supplied with a horizontal overflow weir. Due to lack of hydrological data and the area's extreme floods, however, it is very difficult to design the overflow weirs. Also, catchments are very sensitive to erosion and the reservoirs are rapidly silted up. Consequently, prediction of flood volumes for important rainfall events becomes crucial. Few hydrological observations, however, exist for the catchment areas. For this purpose a geomorphological model methodology is presented to predict shape and volume of hydrographs for important floods. This model is built around a production function that defines the net storm rainfall (portion of rainfall during a storm which reaches a stream channel as direct runoff) from the total rainfall (observed rainfall in the catchment) and a transfer function based on the most complete possible definition of the surface drainage system. Observed rainfall during 5-min time steps was used in the model. The model runoff generation is based on surface drainage characteristics which can be easily extracted from maps. The model was applied to two representative experimental catchments in central Tunisia. The conceptual rainfall-runoff model based on surface topography and drainage network was seen to reproduce observed runoff satisfactory. The calibrated model was used to estimate runoff from 5, 10, 20, and 50 year rainfall return periods regarding runoff volume, maximum runoff, as well as the general shape of the runoff hydrograph. Practical conclusions to design hill reservoirs and to extrapolate results using this model methodology for ungauged small catchments in semiarid Tunisia are made.

Design of a rotary for an uncontrolled multi-leg intersection in Chennai, India

NASA Astrophysics Data System (ADS)

Vasantha Kumar, S.; Gulati, Himanshu; Arora, Shivam

2017-11-01

One way to control the traffic at busy intersections is to construct a roundabout or rotary intersection, which is a special type of at-grade intersection, where all converging vehicles are forced to move round a central island in clock-wise direction. The present study aims to design a rotary for an uncontrolled multi leg intersection located in Royapetah in Chennai, India. The intersection has five approach roads with two-way traffic in all the approach roads and there is no signal or traffic police to control the traffic at present and hence experiences traffic chaos during peak hours. In order to design the rotary, it is essential to have the information on traffic volumes coming from the approach roads. For this, a video data collection was carried out for a duration of eight hours from 7.30 am to 11.30 am and from 2.30 pm to 6.30 pm on a typical working day using a handycam from the terrace of an apartment building located near the intersection. During data extraction stage, each 5 min. traffic volume was extracted for all the five classes of vehicles considered and were converted to passenger car units (PCU). The analysis of traffic data showed that during peak hour from 4.45 pm to 5.45 pm, the proportion of weaving traffic, i.e., ratio of sum of crossing streams to the total traffic on the weaving section was found to be 0.81. According to Indian road congress (IRC) guidelines, this proportion can take any value between 0.4 and 1 and in the present study, the calculated value is found to be within the prescribed range. Using the calculated values of average entry width of the rotary and width & length of weaving section, the practical capacity of the rotary was found to be 3020 PCUs which is well above the observed traffic volume of 2665 PCUs.

Assured crew return vehicle man-systems integration standards

NASA Technical Reports Server (NTRS)

1991-01-01

This is Volume 6 of the Man-Systems Integration Standards (MSIS) family of documents, which is contained in several volumes and a relational database. Each volume has a specific purpose, and each has been assembled from the data contained in the relational database. Volume 6 serves as the Assured Crew Return Vehicle project man-systems integration design requirements. The data in this document is a subset of the data found in Volume 1 and defines the requirements which are pertinent to the Assured Crew Return Vehicle as defined in the SPRD. Additional data and guidelines are provided to assist in the design.

Best Management Practices, Policies and Programs

EPA Pesticide Factsheets

The National Great Practice Compendium highlights outstanding activities, technologies, and programs that prevent trash from entering the aquatic environment and/or that reduce the overall volume of trash that is generated.

Performance of new automated transthoracic three-dimensional echocardiographic software for left ventricular volumes and function assessment in routine clinical practice: Comparison with 3 Tesla cardiac magnetic resonance.

PubMed

Levy, Franck; Dan Schouver, Elie; Iacuzio, Laura; Civaia, Filippo; Rusek, Stephane; Dommerc, Carinne; Marechaux, Sylvestre; Dor, Vincent; Tribouilloy, Christophe; Dreyfus, Gilles

2017-11-01

Three-dimensional (3D) transthoracic echocardiography (TTE) is superior to two-dimensional Simpson's method for assessment of left ventricular (LV) volumes and LV ejection fraction (LVEF). Nevertheless, 3D TTE is not incorporated into everyday practice, as current LV chamber quantification software products are time-consuming. To evaluate the feasibility, accuracy and reproducibility of new fully automated fast 3D TTE software (HeartModel A.I. ; Philips Healthcare, Andover, MA, USA) for quantification of LV volumes and LVEF in routine practice; to compare the 3D LV volumes and LVEF obtained with a cardiac magnetic resonance (CMR) reference; and to optimize automated default border settings with CMR as reference. Sixty-three consecutive patients, who had comprehensive 3D TTE and CMR examinations within 24hours, were eligible for inclusion. Nine patients (14%) were excluded because of insufficient echogenicity in the 3D TTE. Thus, 54 patients (40 men; mean age 63±13 years) were prospectively included into the study. The inter- and intraobserver reproducibilities of 3D TTE were excellent (coefficient of variation<10%) for end-diastolic volume (EDV), end-systolic volume (ESV) and LVEF. Despite a slight underestimation of EDV using 3D TTE compared with CMR (bias=-22±34mL; P<0.0001), a significant correlation was found between the two measurements (r=0.93; P=0.0001). Enlarging default border detection settings leads to frequent volume overestimation in the general population, but improved agreement with CMR in patients with LVEF≤50%. Correlations between 3D TTE and CMR for ESV and LVEF were excellent (r=0.93 and r=0.91, respectively; P<0.0001). 3D TTE using new-generation fully automated software is a feasible, fast, reproducible and accurate imaging modality for LV volumetric quantification in routine practice. Optimization of border detection settings may increase agreement with CMR for EDV assessment in dilated ventricles. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

NASA Technical Reports Server (NTRS)

Smith, A. G. (Editor)

1974-01-01

Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

Quantitative microscopy of the lung: a problem-based approach. Part 2: stereological parameters and study designs in various diseases of the respiratory tract.

PubMed

Mühlfeld, Christian; Ochs, Matthias

2013-08-01

Design-based stereology provides efficient methods to obtain valuable quantitative information of the respiratory tract in various diseases. However, the choice of the most relevant parameters in a specific disease setting has to be deduced from the present pathobiological knowledge. Often it is difficult to express the pathological alterations by interpretable parameters in terms of volume, surface area, length, or number. In the second part of this companion review article, we analyze the present pathophysiological knowledge about acute lung injury, diffuse parenchymal lung diseases, emphysema, pulmonary hypertension, and asthma to come up with recommendations for the disease-specific application of stereological principles for obtaining relevant parameters. Worked examples with illustrative images are used to demonstrate the work flow, estimation procedure, and calculation and to facilitate the practical performance of equivalent analyses.

The Research of Improving the Particleboard Glue Dosing Process Based on TRIZ Analysis

NASA Astrophysics Data System (ADS)

Yu, Huiling; Fan, Delin; Zhang, Yizhuo

This research creates a design methodology by synthesizing the Theory of Inventive Problem Solving (TRIZ) and cascade control based on Smith predictor. The particleboard glue supplying and dosing system case study defines the problem and the solution using the methodology proposed in the paper. Status difference existing in the gluing dosing process of particleboard production usually causes gluing volume inaccurately. In order to solve the problem above, we applied the TRIZ technical contradiction and inventive principle to improve the key process of particleboard production. The improving method mapped inaccurate problem to TRIZ technical contradiction, the prior action proposed Smith predictor as the control algorithm in the glue dosing system. This research examines the usefulness of a TRIZ based problem-solving process designed to improve the problem-solving ability of users in addressing difficult or reoccurring problems and also testify TRIZ is practicality and validity. Several suggestions are presented on how to approach this problem.

Numerical simulation of magnetic field for compact electromagnet consisting of REBCO coils and iron yoke

NASA Astrophysics Data System (ADS)

You, Shuangrong; Chi, Changxin; Guo, Yanqun; Bai, Chuanyi; Liu, Zhiyong; Lu, Yuming; Cai, Chuanbing

2018-07-01

This paper presents the numerical simulation of a high-temperature superconductor electromagnet consisting of REBCO (RE-Ba2Cu3O7‑x, RE: rare earth) superconducting tapes and a ferromagnetic iron yoke. The REBCO coils with multi-width design are operating at 77 K, with the iron yoke at room temperature, providing a magnetic space with a 32 mm gap between two poles. The finite element method is applied to compute the 3D model of the studied magnet. Simulated results show that the magnet generates a 1.5 T magnetic field at an operating current of 38.7 A, and the spatial inhomogeneity of the field is 0.8% in a Φ–20 mm diameter sphere volume. Compared with the conventional iron electromagnet, the present compact design is more suitable for practical application.

Space Station Mission Planning Study (MPS) development study. Volume 3: Software development plan

NASA Technical Reports Server (NTRS)

Klus, W. L.

1987-01-01

A software development plan is presented for the definition, design, and implementation of the Space Station (SS) Payload Mission Planning System (MPS). This plan is an evolving document and must be updated periodically as the SS design and operations concepts as well as the SS MPS concept evolve. The major segments of this plan are as follows: an overview of the SS MPS and a description of its required capabilities including the computer programs identified as configurable items with an explanation of the place and function of each within the system; an overview of the project plan and a detailed description of each development project activity breaking each into lower level tasks where applicable; identification of the resources required and recommendations for the manner in which they should be utilized including recommended schedules and estimated manpower requirements; and a description of the practices, standards, and techniques recommended for the SS MPS Software (SW) development.

30 CFR 780.35 - Disposal of excess spoil.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

30 CFR 784.19 - Disposal of excess spoil.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

30 CFR 780.35 - Disposal of excess spoil.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

30 CFR 780.35 - Disposal of excess spoil.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

30 CFR 784.19 - Disposal of excess spoil.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

30 CFR 784.19 - Disposal of excess spoil.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the operation has been designed to minimize, to the extent possible, the volume of excess spoil that... authority, that the designed maximum cumulative volume of all proposed excess spoil fills within the permit... and related environmental values. You must design the operation to avoid placement of excess spoil in...

Innovative Roadway Design for Recreation Areas.

DTIC Science & Technology

1982-02-01

Volume Roadways by Terrain Condition (Kearney, 1979) DHV* Maximum Grade (M) ( vph ) Level Rolling Mountainous 100 7 10 12 100-400 7 9 10 400 6 7 9 * DHV...design hourly volume; vph = vehicles per hour. j. Design of the vertical alignment is also affected by using the reduced sight distances discussed