Orbiting Geophysical Observatory Attitude Control Subsystem Design Survey. NASA/ERC Design Criteria Program, Guidance and Control

NASA Technical Reports Server (NTRS)

Mc Kenna, K. J.; Schmeichel, H.

1968-01-01

This design survey summarizes the history of the Orbiting Geophysical Observatories' (OGO) Attitude Control Subsystem (ACS) from the proposal phase through current flight experience. Problems encountered in design, fabrication, test, and on orbit are discussed. It is hoped that the experiences of the OGO program related here will aid future designers.

The conception, birth, and growth of a missile umbilical system

NASA Technical Reports Server (NTRS)

Nordman, G. W.

1977-01-01

The design development of the Sprint 2 and the Improved Sprint 2 Missile System umbilical system is reviewed. Unique system requirements, umbilical designs considered to meet the requirements, and the problems encountered and solutions derived during the design and development testing of the selected systems are described.

Engineering Encounters: Identifying an Engineering Design Problem

ERIC Educational Resources Information Center

Chizek, Lisa; VanMeeteren, Beth; McDermott, Mark; Uhlenberg, Jill

2018-01-01

Engineering is an intriguing way for students to connect the design process with their knowledge of science (NRC 2012). This article describes the "Engineering a Pancake Recipe" design process which was created to make the structure and properties of matter more meaningful for fifth grade students. The whole pancake recipe engineering…

Functional Behavioral Assessment for a Boy with Duchenne Muscular Dystrophy and Problem Behavior: A Case Study from Greece

ERIC Educational Resources Information Center

Theodoridou, Zoe; Koutsoklenis, Athanasios

2013-01-01

This article focuses on the application of functional behavioral assessment (FBA) to design a positive behavior intervention (PBI) for a boy with Duchenne muscular dystrophy (DMD) who encounters serious difficulties at the mainstream school because of behavioral problems and physical limitations. After the definition of problem behavior and its…

The design, development and qualification of a lightweight antenna pointing mechanism

NASA Technical Reports Server (NTRS)

Shmulevitz, M.; Halsband, A.

1996-01-01

This paper describes the design, development, and qualification of a new lightweight and compact Antenna Pointing Mechanism (APM). The APM was specially designed to meet the stringent mass, envelope, and environmental requirements of OFFEQ experimental satellite. During the development phase, some problems were encountered with the brushless DC motors, slip ring contact resistance, and bearing drag torque. All of these problems were resolved, and two APM units have been operating successfully in orbit since April, 1995.

Design and Development of a Nonverbal Program

ERIC Educational Resources Information Center

Thiagarajan, S.

1973-01-01

Problems were encountered in designing an illustrated program on contraceptive techniques for India's rural population where illiteracy is high and hundreds of different languages are spoken. Field trials of a picture program indicated the ability to "read" a picture is an acquired skill. (Author)

The mechanical design of an imaging photopolarimeter for the Jupiter missions (Pioneer 10 and 11)

NASA Technical Reports Server (NTRS)

Kodak, J. C.

1975-01-01

The mechanical design and fabrication are discussed of the imaging photopolarimeter (IPP), a multifunction space-qualified instrument used on the Jupiter Pioneer missions. The extreme environmental requirements for the structural design, optical system, and mechanisms are described with detailed discussion of some of the design and fabrication problems encountered.

Field trials of medical decision-aids: potential problems and solutions.

PubMed Central

Wyatt, J.; Spiegelhalter, D.

1991-01-01

Only clinical trials can assess the impact of prototype medical decision-aids, but they are seldom performed before dissemination. Many problems are encountered when designing such studies, including ensuring generality, deciding what to measure, feasible study designs, correcting for biases caused by the trial itself and by the decision-aid, resolving the "Evaluation Paradox", and potential legal and ethical doubts. These are discussed in this paper. PMID:1807610

Student Problems. Adult Literacy Independent Learning Packet.

ERIC Educational Resources Information Center

Koefer, Ann M.

This independent learning packet, which is designed for administrators, teachers, counselors, and tutors in Pennsylvania's Region 7 Tri-Valley Literacy Staff Development area as well as for their adult students, examines the following seven problems encountered by students: the job market, child care, single parenting/parenting skills, divorce,…

Designing an International Joint Venture Negotiation Game.

ERIC Educational Resources Information Center

Kenkel, Phil; And Others

1996-01-01

Evaluates a simulation game that models management problems encountered in negotiating and managing international joint ventures. Designed to instruct executives of state-owned agribusinesses in Indonesia in abstract concepts such as partner rapport, transfer price conflicts, and marketing disagreements, its success suggests that simulation games…

Development of Emergency Intravehicular Spacesuit (EIS) assembly

NASA Technical Reports Server (NTRS)

1973-01-01

A program was undertaken to develop and test two prototype pressure suits to operate at pressures up to 413 mm Hg (8.0 PSIG). The units were designated Emergency Intravehicular Spacesuits (EIS). Performance requirements, design evolution, testing performed, problems encountered, and final EIS configuration are reported.

Solar heating and hot water system installed at Charlotte Memorial Hospital, Charlotte, North Carolina

NASA Technical Reports Server (NTRS)

1981-01-01

Detailed information regarding the design and installation of a heating and hot water system in a commercial application is given. This information includes descriptions of system and building, design philosophy, control logic operation modes, design and installation drawing and a brief description of problems encountered and their solutions.

Large-scale structural optimization

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.

1983-01-01

Problems encountered by aerospace designers in attempting to optimize whole aircraft are discussed, along with possible solutions. Large scale optimization, as opposed to component-by-component optimization, is hindered by computational costs, software inflexibility, concentration on a single, rather than trade-off, design methodology and the incompatibility of large-scale optimization with single program, single computer methods. The software problem can be approached by placing the full analysis outside of the optimization loop. Full analysis is then performed only periodically. Problem-dependent software can be removed from the generic code using a systems programming technique, and then embody the definitions of design variables, objective function and design constraints. Trade-off algorithms can be used at the design points to obtain quantitative answers. Finally, decomposing the large-scale problem into independent subproblems allows systematic optimization of the problems by an organization of people and machines.

Nurses' perceptions and problems in the usability of a medication safety app.

PubMed

Ankem, Kalyani; Cho, Sookyung; Simpson, Diana

2017-10-16

The majority of medication apps support medication adherence. Equally, if not more important, is medication safety. Few apps report on medication safety, and fewer studies have been conducted with these apps. The usability of a medication safety app was tested with nurses to reveal their perceptions of the graphical user interface and to discover problems they encountered in using the app. Usability testing of the app was conducted with RN-BSN students and informatics students (n = 18). Perceptions of the graphical components were gathered in pretest and posttest questionnaires, and video recordings of the usability testing were transcribed. The significance of the difference in mean performance time for 8 tasks was tested, and qualitative analysis was deployed to identify problems encountered and to rate the severity of each problem. While all participants perceived the graphical user interface as easy to understand, nurses took significantly more time to complete certain tasks. More nurses found the medication app to be lacking in intuitiveness of user interface design, in capability to match real-world data, and in providing optimal information architecture. To successfully integrate mobile devices in healthcare, developers must address the problems that nurses encountered in use of the app.

A Pilot Study of Problems and Practices in the Induction of Beginning Teachers.

ERIC Educational Resources Information Center

Bouchard, John B.; Hull, Ronald E.

A pilot study was designed to test the practicality of gathering data through interviews and to provide tentative information on induction problems and practices encountered by beginning teachers in the Cattaraugus-Chautauqua County area of New York. Fifty-three elementary self-contained classroom teachers and secondary academic subject-matter…

Transactional Distance in a Blended Learning Environment

ERIC Educational Resources Information Center

Dron, Jon; Seidel, Catharine; Litten, Gabrielle

2004-01-01

This paper presents a case study that describes and discusses the problems encountered during the design and implementation of a blended learning course, largely taught online through a web-based learning environment. Based on Moore's theory of transactional distance, the course was explicitly designed to have dialogue at its heart. However, the…

The Early Years: Integrating Design

ERIC Educational Resources Information Center

Ashbrook, Peggy; Nellor, Sue

2015-01-01

Engineering is such a common part of children's work in early childhood programs that teachers can simply look around the room to identify examples where students have engaged in engineering practices. This article presents a classroom activity that integrates engineering design by building on the everyday problems that young children encounter in…

A review of the Los Alamos effort in the development of nuclear rocket propulsion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durham, F.P.; Kirk, W.L.; Bohl, R.J.

1991-01-01

This paper reviews the achievements of the Los Alamos nuclear rocket propulsion program and describes some specific reactor design and testing problems encountered during the development program along with the progress made in solving these problems. The relevance of these problems to a renewed nuclear thermal rocket development program for the Space Exploration Initiative (SEI) is discussed. 11 figs.

A subcutaneous channeling probe for implanting long leads

NASA Technical Reports Server (NTRS)

Lund, G. F.; Simmonds, R. C.; Williams, B. A.

1977-01-01

The channeling probe described in the present paper was designed to overcome surgical problems of the type that were encountered when a multichannel radio transmitter had to be implanted in a cow. The probe was made of a flexible but sufficiently stiff 9.5-mm-diam nylon rod, consisting of 46-cm sections for convenience in sterilization and surgical handling. Stainless steel sleaves reinforced the threaded connecting joints. At one end, arrowhead-shaped channeling heads could be attached to produce wide channels for large sensors. The other end was tapered for narrow channels. Postoperative problems were not encountered in the use of this probe in cows, sheep, and dogs.

Similitude design for the vibration problems of plates and shells: A review

NASA Astrophysics Data System (ADS)

Zhu, Yunpeng; Wang, You; Luo, Zhong; Han, Qingkai; Wang, Deyou

2017-06-01

Similitude design plays a vital role in the analysis of vibration and shock problems encountered in large engineering equipment. Similitude design, including dimensional analysis and governing equation method, is founded on the dynamic similitude theory. This study reviews the application of similitude design methods in engineering practice and summarizes the major achievements of the dynamic similitude theory in structural vibration and shock problems in different fields, including marine structures, civil engineering structures, and large power equipment. This study also reviews the dynamic similitude design methods for thin-walled and composite material plates and shells, including the most recent work published by the authors. Structure sensitivity analysis is used to evaluate the scaling factors to attain accurate distorted scaling laws. Finally, this study discusses the existing problems and the potential of the dynamic similitude theory for the analysis of vibration and shock problems of structures.

A Guide to Job Enrichment and Redesign.

ERIC Educational Resources Information Center

Cunningham, J. Barton; Eberle, Ted

1990-01-01

Describes job design alternatives--job enrichment, the job characteristics model, Japanese style management, and quality-of-worklife approaches. Focuses on the problems that human resources professionals may encounter when attempting to implement these approaches. (Author/JOW)

Nuclear Safety Information Center, Its Products and Services

ERIC Educational Resources Information Center

Buchanan, J. R.

1970-01-01

The Nuclear Safety Information Center (NSIC) serves as a focal point for the collection, analysis and dissemination of information related to safety problems encountered in the design, analysis, and operation of nuclear facilities. (Author/AB)

Moisture Control Guidance for Commercial and Public ...

EPA Pesticide Factsheets

This document provides guidance to designers, construction mangers, and building operation/maintenance managers to improve IEQ and reduce risks of encountering IEQ problems due to insufficient moisture control. EPA will be producing a document entitled

The problem of site variation within red pine provenance experiments

Treesearch

Mark J. Holst

1966-01-01

In spite of care taken in the selection of site and experimental design of provenance experiments, site heterogenity within the experimental area may be more complex than was anticipated when the experiment was established. The present paper describes a problem of this nature encountered in a red pine (Pinus resinosa Ait.) provenance experiment at...

Guidelines for a Training Course in Noise Survey Techniques.

ERIC Educational Resources Information Center

Shadley, John; And Others

The course is designed to train noise survey technicians during a 3-5 day period to make reliable measurements of 75 percent of the noise problems encountered in the community. The more complex noise problems remaining will continue to be handled by experienced specialists. These technicians will be trained to assist State and local governments in…

Elementary Science and Technology Teachers' Views on Problems Encountered in the Instructional Process

ERIC Educational Resources Information Center

Gecer, Aynur; Ozel, Ruhan

2012-01-01

This research aims to explore the problems that teacher have experienced their opinion towards effectives and and functionality of teaching-learning process of Primary Science and Technology curriculum started to be implemented in 2004-2005 academic year in Turkey. The qualitative research design is used in this study. Research data are collected…

Learning to Solve Addition and Subtraction Word Problems in English as an Imported Language

ERIC Educational Resources Information Center

Verzosa, Debbie Bautista; Mulligan, Joanne

2013-01-01

This paper reports an intervention phase of a design study aimed to assist second-grade Filipino children in solving addition word problems in English, a language they primarily encounter only in school. With Filipino as the medium of instruction, an out-of-school pedagogical intervention providing linguistic and representational scaffolds was…

Phased-array-fed antenna configuration study. Volume 1: Technology assessment

NASA Technical Reports Server (NTRS)

Sorbello, R. M.; Zaghloul, A. I.; Lee, B. S.; Siddiqi, S.; Geller, B. D.; Gerson, H. I.; Srinivas, D. N.

1983-01-01

The status of the technologies for phased-array-fed dual reflector systems is reviewed. The different aspects of these technologies, including optical performances, phased array systems, problems encountered in phased array design, beamforming networks, MMIC design and its incorporation into waveguide systems, reflector antenna structures, and reflector deployment mechanisms are addressed.

Evaluation of geophysical properties of the lunar regolith for the design of precursor scientific missions for the space exploration initiative

NASA Technical Reports Server (NTRS)

Morgan, Paul

1990-01-01

The following topics are addressed: (1) the frequency of encountering boulders that represent hazards to lunar operations; (2) the ease of lunar soil excavation; (3) the use of explosives in excavation operation; (4) the trafficability of the regolith; (5) problems encountered in mining (probably strip mining) of the regolith; (6) the stable angle(s) of repose in excavation of the regolith; (7) the layering to be encountered in the subsurface; (8) knowledge of the regolith site and the possibility of its general application to any site on the lunar surface; (9) the data needed to characterize a site for a lunar base; (10) the influence of regolith properties on the design of geophysical experiments from the lunar base; and (11) terrestrial analogues for the geophysical properties of the lunar regolith.

UFO (UnFold Operator) computer program abstract

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kissel, L.; Biggs, F.

UFO (UnFold Operator) is an interactive user-oriented computer program designed to solve a wide range of problems commonly encountered in physical measurements. This document provides a summary of the capabilities of version 3A of UFO.

[Professional debate on shortage of physicians].

PubMed

Gérvas, Juan; Bonis, Julio

2008-01-01

We do not know the best answer to problems due to shortage of physicians (absolute number and by specialities) but perhaps what is important is the lack of a professional debate about what means 'to be' a physician. In this paper we address four key professional questions: 1/ the over-training of physicians when health demand now includes minor problems, 2/ predominance of physician-patient direct encounters in a world of telecommunications and indirect encounters, 3/ the need to delegate power and responsibilities to other health professionals as a consequence of new technology developments and changes in role-design, and 4/ too much emphasis in diagnosis with the danger to initiate cascades with its side-effects. Practical answers to these questions require changes in pre and postgraduate education, improvement in health services organization to profit the use of telecommunications and analysis and re-design of the limits in between professions, levels of care, institutions and health and social sectors.

Towards sub-optimal stochastic control of partially observable stochastic systems

NASA Technical Reports Server (NTRS)

Ruzicka, G. J.

1980-01-01

A class of multidimensional stochastic control problems with noisy data and bounded controls encountered in aerospace design is examined. The emphasis is on suboptimal design, the optimality being taken in quadratic mean sense. To that effect the problem is viewed as a stochastic version of the Lurie problem known from nonlinear control theory. The main result is a separation theorem (involving a nonlinear Kalman-like filter) suitable for Lurie-type approximations. The theorem allows for discontinuous characteristics. As a byproduct the existence of strong solutions to a class of non-Lipschitzian stochastic differential equations in dimensions is proven.

The design of two sonic boom wind tunnel models from conceptual aircraft which cruise at Mach numbers of 2.0 and 3.0

NASA Technical Reports Server (NTRS)

Mack, Robert J.; Needleman, Kathy E.

1990-01-01

A method for designing wind tunnel models of conceptual, low-boom, supersonic cruise aircraft is presented. Also included is a review of the procedures used to design the conceptual low-boom aircraft. In the discussion, problems unique to, and encountered during, the design of both the conceptual aircraft and the wind tunnel models are outlined. The sensitivity of low-boom characteristics in the aircraft design to control the volume and lift equivalent area distributions was emphasized. Solutions to these problems are reported; especially the two which led to the design of the wind tunnel model support stings.

Self-Instructional Materials for Underprepared Science Students.

ERIC Educational Resources Information Center

Bedient, Douglas; And Others

1984-01-01

Some of the students in Southern Illinois University's introductory zoology course were deficient in certain skills. The design of self-instructional modules that would be educationally sound and help overcome some problems encountered in this course is discussed. (MLW)

Sunlight Diffusing Tent for Lunar Worksite

NASA Technical Reports Server (NTRS)

Burleson, Blair; Clark, Todd; Deese, Todd; Gentry, Ernest; Samad, Abdul

1990-01-01

The purpose is to provide a solution to problems astronauts encounter with sunlight on the lunar surface. Due to the absence of an atmosphere the Moon is subjected to intense sunlight creating problems with color and contrast. This problem can be overcome by providing a way to reduce intensity and diffuse the light in a working environment. The solution to the problem utilizes an umbrella, tent-like structure covered with a diffusing material. The design takes into account structural materials, stresses, fabrics, and deployment.

Lattice Boltzmann computation of creeping fluid flow in roll-coating applications

NASA Astrophysics Data System (ADS)

Rajan, Isac; Kesana, Balashanker; Perumal, D. Arumuga

2018-04-01

Lattice Boltzmann Method (LBM) has advanced as a class of Computational Fluid Dynamics (CFD) methods used to solve complex fluid systems and heat transfer problems. It has ever-increasingly attracted the interest of researchers in computational physics to solve challenging problems of industrial and academic importance. In this current study, LBM is applied to simulate the creeping fluid flow phenomena commonly encountered in manufacturing technologies. In particular, we apply this novel method to simulate the fluid flow phenomena associated with the "meniscus roll coating" application. This prevalent industrial problem encountered in polymer processing and thin film coating applications is modelled as standard lid-driven cavity problem to which creeping flow analysis is applied. This incompressible viscous flow problem is studied in various speed ratios, the ratio of upper to lower lid speed in two different configurations of lid movement - parallel and anti-parallel wall motion. The flow exhibits interesting patterns which will help in design of roll coaters.

Challenges Inherent in the Design and Implementation of After-School Intervention Programs for Middle Grade Underachieving Readers

ERIC Educational Resources Information Center

Velten, Justin; Mokhtari, Kouider

2016-01-01

In this brief report, we share three challenges we encountered when designing and implementing an after school intervention program for an ethnically diverse group of middle grade underachieving readers. We also offer practical solutions to help guide middle school teams in anticipating and addressing potential problems when putting in place…

A Procedure for the Analysis of Time-Series Designs

ERIC Educational Resources Information Center

Algina, James; Swaminathan, Hariharan

1977-01-01

One of the most frequently encountered problems in educational research and evaluation is that of evaluating the effect of a treatment in settings over which the researcher or evaluator has little control. A strong plea is made for use of quasi-experimental designs in these situations and this research provides a method of testing the hypothesis…

Solar heating and cooling system design and development

NASA Technical Reports Server (NTRS)

1979-01-01

The design and development of marketable solar heating and cooling systems for single family and commercial applications is described. The delivery, installation, and monitoring of the prototype systems are discussed. Seven operational test sites are discussed in terms of system performance. Problems encountered with equipment and installation were usually due to lack of skills required for solar system installation.

Problems Encountered by Religious Vocational Secondary School and Other Secondary School Students in Physical Education and Sports Activities

ERIC Educational Resources Information Center

Bar, Mustafa; Yaman, Menzure Sibel; Hergüner, Gülten

2016-01-01

The study aimed to determine problems encountered by Religious Vocational Secondary School and other Secondary School students in physical education and sports activities and to compare these problems according to school type and gender. A questionnaire named "Problems encountered in attending to physical education and sports activities"…

Issues in Implementing a Structured Problem-Based Learning Strategy in a Volcano Unit: A Case Study

ERIC Educational Resources Information Center

Lee, Hyunju; Bae, Sungah

2008-01-01

The purpose of this study was to understand how an 8th grade science class used a structured problem-based learning (PBL) strategy to study volcanoes and to discuss some of the issues that science teachers might encounter when designing and implementing the PBL strategy. This study took place at Collins Middle School, which is located in a…

Distributed Prognostic Health Management with Gaussian Process Regression

NASA Technical Reports Server (NTRS)

Saha, Sankalita; Saha, Bhaskar; Saxena, Abhinav; Goebel, Kai Frank

2010-01-01

Distributed prognostics architecture design is an enabling step for efficient implementation of health management systems. A major challenge encountered in such design is formulation of optimal distributed prognostics algorithms. In this paper. we present a distributed GPR based prognostics algorithm whose target platform is a wireless sensor network. In addition to challenges encountered in a distributed implementation, a wireless network poses constraints on communication patterns, thereby making the problem more challenging. The prognostics application that was used to demonstrate our new algorithms is battery prognostics. In order to present trade-offs within different prognostic approaches, we present comparison with the distributed implementation of a particle filter based prognostics for the same battery data.

Automated design of gravity-assist trajectories to Mars and the outer planets

NASA Technical Reports Server (NTRS)

Longuski, James M.; Williams, Steve N.

1991-01-01

In this paper, a new approach to planetary mission design is described which automates the search for gravity-assist trajectories. This method finds all conic solutions given a range of launch dates, a range of launch energies and a set of target planets. The new design tool is applied to the problems of finding multiple encounter trajectories to the outer planets and Venus gravity-assist trajectories to Mars. The last four-planet grand tour opportunity (until the year 2153) is identified. It requires an earth launch in 1996 and encounters Jupiter, Uranus, Neptune, and Pluto. Venus gravity-assist trajectories to Mars for the 30 year period 1995-2024 are examined. It is shown that in many cases these trajectories require less launch energy to reach Mars than direct ballistic trajectories.

Librarians Flip for Students: Teaching Searching Skills to Medical Students Using a Flipped Classroom Approach.

PubMed

Minuti, Aurelia; Sorensen, Karen; Schwartz, Rachel; King, Winifred S; Glassman, Nancy R; Habousha, Racheline G

2018-01-01

This article describes the development of a flipped classroom instructional module designed by librarians to teach first- and second-year medical students how to search the literature and find evidence-based articles. The pre-class module consists of an online component that includes reading, videos, and exercises relating to a clinical case. The in-class sessions, designed to reinforce important concepts, include various interactive activities. The specifics of designing both components are included for other health sciences librarians interested in presenting similar instruction. Challenges encountered, particularly in the live sessions, are detailed, as are the results of evaluations submitted by the students, who largely enjoyed the online component. Future plans are contingent on solving technical problems encountered during the in-class sessions.

Apollo experience report: Power generation system

NASA Technical Reports Server (NTRS)

Bell, D., III; Plauche, F. M.

1973-01-01

A comprehensive review of the design philosophy and experience of the Apollo electrical power generation system is presented. The review of the system covers a period of 8 years, from conception through the Apollo 12 lunar-landing mission. The program progressed from the definition phase to hardware design, system development and qualification, and, ultimately, to the flight phase. Several problems were encountered; however, a technology evolved that enabled resolution of the problems and resulted in a fully manrated power generation system. These problems are defined and examined, and the corrective action taken is discussed. Several recommendations are made to preclude similar occurrences and to provide a more reliable fuel-cell power system.

The ADL Registry and CORDRA. Volume 1: General Overview

DTIC Science & Technology

2008-08-01

and problems encountered by others in related fields, such as library science , computer and network systems design, and publishing. As ADL...in and exist in isolated islands, limiting their visibility, access, and reuse. 4 Compared to publishing and library science , the learning

Moisture Control Guidance for Commercial and Public Buildings (EPA 402-F-13053)

EPA Science Inventory

This document provides guidance to designers, construction mangers, and building operation/maintenance managers to improve IEQ and reduce risks of encountering IEQ problems due to insufficient moisture control. EPA will be producing a document entitled "Moisture Control Guida...

28 CFR 92.10 - Providing tutorials and other academic assistance programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... must include academic counseling, tutorials and other academic assistance programs to enable... varied academic needs of individual applicants; and (3) Academic and guidance counseling for adults. Specific counseling programs must be designed for individuals who encounter problems with passing the...

Dealing with Sexual Harassment.

ERIC Educational Resources Information Center

Rowe, Mary P.

1981-01-01

Advice is presented for managers who encounter sexual harassment problems. Three recommendations are offered: complainants can be helped to help themselves, such conflicts can be resolved through procedures designed to deal with all kinds of complaints, and the issue of power differences should be confronted. (MLW)

Design, development and deployment of public service photovoltaic power/load systems for the Gabonese Republic

NASA Technical Reports Server (NTRS)

Kaszeta, William J.

1987-01-01

Five different types of public service photovoltaic power/load systems installed in the Gabonese Republic are discussed. The village settings, the systems, performance results and some problems encountered are described. Most of the systems performed well, but some of the systems had problems due to failure of components or installation errors. The project was reasonably successful in collecting and reporting data for system performance evaluation that will be useful for guiding officials and system designers involved in village power applications in developing countries.

The use of twin-screen-based WIMPS in spacecraft control

NASA Astrophysics Data System (ADS)

Klim, R. D.

1990-10-01

The ergonomic problems of designing a sophisticated Windows Icons Mouse Pop-up (WIMP) based twin screen workstation are outlined. These same problems will be encountered by future spacecraft controllers. The design of a modern, advanced workstation for use on a distributed multicontrol center in a multisatellite control system is outlined. The system uses access control mechanisms to ensure that only authorized personnel can undertake certain operations on the workstation. Rules governing the use of windowing features, screen attributes, icons, keyboard and mouse in spacecraft control are discussed.

Application of spring tabs to elevator controls

NASA Technical Reports Server (NTRS)

Phillips, William H

1944-01-01

Equations are presented for calculating the stick-force characteristics obtained with a spring-tab type of elevator control. The main problems encountered in the design of a satisfactory elevator spring tab are to provide stick forces in the desired range, to maintain the force per g sufficiently constant throughout the speed range, to avoid undesirable "feel" of the control in ground handling or in flight at low airspeeds, and to prevent flutter. Examples are presented to show the design features of spring tabs required to solve these problems for airplanes of various sizes.

Engineering Encounters: No, David! but Yes, Design! Kindergarten Students Are Introduced to a Design Way of Thinking

ERIC Educational Resources Information Center

Douglass, Helen

2016-01-01

This column presents ideas and techniques to enhance science teaching. In today's classrooms, teachers face numerous challenges. They are preparing students for jobs and careers that are not even conceived of yet. Assessments are being used to address students' college and career readiness and to promote critical thinking and problem solving.…

The conception, birth, and growth of a missile umbilical system

NASA Technical Reports Server (NTRS)

Nordman, G. W.

1977-01-01

The design development was traced for the sprint 2 and improved sprint 2 missile system (ISMS) umbilical system. The unique system requirements, umbilical designs considered to meet the requirements, and the problems encountered and solutions derived during the design, and development testing of the selected systems are described. The sprint 2 development effort consisted of design, analysis, and testing activities. The ISMS effort involved the performance of an extensive trade study to determine the optimum design to meet the ISMS conditions.

The Experimental Design Assistant.

PubMed

Percie du Sert, Nathalie; Bamsey, Ian; Bate, Simon T; Berdoy, Manuel; Clark, Robin A; Cuthill, Innes; Fry, Derek; Karp, Natasha A; Macleod, Malcolm; Moon, Lawrence; Stanford, S Clare; Lings, Brian

2017-09-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility.

The Experimental Design Assistant

PubMed Central

Bamsey, Ian; Bate, Simon T.; Berdoy, Manuel; Clark, Robin A.; Cuthill, Innes; Fry, Derek; Karp, Natasha A.; Macleod, Malcolm; Moon, Lawrence; Stanford, S. Clare; Lings, Brian

2017-01-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility. PMID:28957312

The Therapeutic Stage Encounters the Virtual World

ERIC Educational Resources Information Center

Imholz, Susan

2008-01-01

Clinical research in expressive therapies, psychodrama in particular, offer education researchers and software designers descriptive analyses and evidence-based impact studies on attitudinal shifts and enhanced problem solving abilities for patients and students who participate in psychodrama role-play. Gaming environments and virtual worlds that…

Guidelines for determining the capacity of d-regions with premature concrete deterioration of ASR/DEF.

DOT National Transportation Integrated Search

2012-11-01

When a bridge engineer encounters a design or analysis problem concerning a bridge substructure, that structure will commonly have a mixture of member types, some slender, and some squat. Slender members are generally governed by flexure, and normal ...

90-Day Cycle Handbook

ERIC Educational Resources Information Center

Park, Sandra; Takahashi, Sola

2013-01-01

90-Day Cycles are a disciplined and structured form of inquiry designed to produce and test knowledge syntheses, prototyped processes, or products in support of improvement work. With any type of activity, organizations inevitably encounter roadblocks to improving performance and outcomes. These barriers might include intractable problems at…

Designing a systematic landscape monitoring approach for quantifying ecosystem services

EPA Science Inventory

A key problem encountered early on by governments striving to incorporate the ecosystem services concept into decision making is quantifying ecosystem services across large landscapes. Basically, they are faced with determining what to measure, how to measure it and how to aggre...

Guidelines for analyzing the capacity of d-regions with premature concrete deterioration of ASR/DEF.

DOT National Transportation Integrated Search

2015-03-01

When a bridge engineer encounters a design or analysis problem concerning a bridge substructure, : that structure will commonly have a mixture of member types, some slender, and some squat. : Slender members are generally governed by flexure, and nor...

Using Three-Dimensional Printing to Fabricate a Tubing Connector for Dilation and Evacuation.

PubMed

Stitely, Michael L; Paterson, Helen

2016-02-01

This is a proof-of-concept study to show that simple instrumentation problems encountered in surgery can be solved by fabricating devices using a three-dimensional printer. The device used in the study is a simple tubing connector fashioned to connect two segments of suction tubing used in a surgical procedure where no commercially available product for this use is available through our usual suppliers in New Zealand. A cylindrical tubing connector was designed using three-dimensional printing design software. The tubing connector was fabricated using the Makerbot Replicator 2X three-dimensional printer. The connector was used in 15 second-trimester dilation and evacuation procedures. Data forms were completed by the primary operating surgeon. Descriptive statistics were used with the expectation that the device would function as intended in all cases. The three-dimensional printed tubing connector functioned as intended in all 15 instances. Commercially available three-dimensional printing technology can be used to overcome simple instrumentation problems encountered during gynecologic surgical procedures.

The Problems Encountered in a CTEV Clinic: Can Better Casting and Bracing Be Accomplished?

PubMed

Agarwal, Anil; Kumar, Anubrat; Shaharyar, Abbas; Mishra, Madhusudan

2016-09-07

The aim of the study is to create awareness in the practicing health care workers toward the problems encountered during casting and bracing of clubfoot following Ponseti method, and in turn avoid them. Retrospective audit of 6 years' clubfoot clinic records to analyze problems associated with Ponseti method. Problems were encountered in 26 cast and in 6 braced patients. Just 4 patients out of 71 syndromic (5.6%) experienced problems during casting compared with 3% overall incidence. The common problems encountered in casted patients were moisture lesions, hematoma, dermatitis due to occlusion, pressure sores, and fractures. There was excessive bleeding in 1 patient at time of tenotomy. In braced patients, pressure sores and tenderness at tenotomy site were major problems. None of the syndromic patients experienced difficulties during bracing. Problems were encountered with Ponseti method during casting, tenotomy, or bracing. Syndromic children had lesser complication rate than idiopathic clubfeet. It is important to be aware of these problems so that appropriate intervention can be done early. Level IV: Retrospective. © 2016 The Author(s).

Analysis of Slabs-on-Grade for a Variety of Loading and Support Conditions.

DTIC Science & Technology

1984-12-01

applications, namely "- the problem of a slab-on-grade, as encountered in the analysis and design of rigid pavements. - ". This is one of the few...proper design and construction methods are adhered to. There are several additional reasons, entirely due to recent developments, that warrant the...conservative designs led to almost imperceptible pavement deformations, thus warranting the term "rigid pavements". Modern-day analytical techniques

The Impacts of Climate Change and Anthropogenic Processes on Permafrost Soils and USAF Infrastructure within Northern Tier Bases

DTIC Science & Technology

2017-03-24

between the capabilities of these two soil conditions will need to be taken into account when designing the facility. Problem Statement The IPCC claims...ability to plan foundation designs and mitigation techniques for changing soil characteristics. 9 II. Literature Review...AFB will be constructed on permafrost soils. Golder Associates (2016) states in their design report, If permafrost soils are encountered, two of the

The Views of the Teachers Related to the Problems the Nursery Class Teachers Encounter in Personnel Services and General Services

ERIC Educational Resources Information Center

Ertör, Eren; Akan, Durdagi

2016-01-01

In this study, it was aimed to analyze the problems that the nursery school teachers, who worked in primary schools of Ministry of National Education in Agri city center in 2014-2015 academic years, experience in personnel services and general services according to the views of the teachers. In the direction of this purpose, phenomenology design,…

Survey of editors and reviewers of high-impact psychology journals: statistical and research design problems in submitted manuscripts.

PubMed

Harris, Alex; Reeder, Rachelle; Hyun, Jenny

2011-01-01

The authors surveyed 21 editors and reviewers from major psychology journals to identify and describe the statistical and design errors they encounter most often and to get their advice regarding prevention of these problems. Content analysis of the text responses revealed themes in 3 major areas: (a) problems with research design and reporting (e.g., lack of an a priori power analysis, lack of congruence between research questions and study design/analysis, failure to adequately describe statistical procedures); (b) inappropriate data analysis (e.g., improper use of analysis of variance, too many statistical tests without adjustments, inadequate strategy for addressing missing data); and (c) misinterpretation of results. If researchers attended to these common methodological and analytic issues, the scientific quality of manuscripts submitted to high-impact psychology journals might be significantly improved.

CCD research. [design, fabrication, and applications

NASA Technical Reports Server (NTRS)

Gassaway, J. D.

1976-01-01

The fundamental problems encountered in designing, fabricating, and applying CCD's are reviewed. Investigations are described and results and conclusions are given for the following: (1) the development of design analyses employing computer aided techniques and their application to the design of a grapped structure; (2) the role of CCD's in applications to electronic functions, in particular, signal processing; (3) extending the CCD to silicon films on sapphire (SOS); and (4) all aluminum transfer structure with low noise input-output circuits. Related work on CCD imaging devices is summarized.

Directed Design of Experiments (DOE) for Determining Probability of Detection (POD) Capability of NDE Systems (DOEPOD)

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2007-01-01

This viewgraph presentation reviews some of the problems that are encountered by designers of Non-Destructive Examination (NDE) have in determining the probability of detection. According to the author "[the] NDE community should not blindly accept statistical results due to lack of knowledge." This is an attempt to bridge the gap between people doing NDE, and statisticians.

[Survey on drug-related problems in Lithuania's pharmacies].

PubMed

Kubiliene, Loreta; Liukenskyte, Simona; Savickas, Arūnas; Jureniene, Kristina

2006-01-01

to survey the most common and the most important drug-related problems in Lithuania, to explore their solution and factors influencing it, to formulate recommendations for solving drug-related problems. Pharmacists from community pharmacies participated in a random survey. They filled in questionnaires about drug-related problems and their solutions. It was the first survey on drug-related problems ever carried out in Lithuania. For the first time, it was found out that in Lithuania pharmacists most commonly encountered drug-related problem--additional drug therapy (52.03% of respondents)--and most rarely encountered drug-related problem--dosage too high (3% of respondents). Pharmacists stated that all categories of drug-related problems were of equal importance. It was established that pharmacists commonly solved drug-related problems associated with noncompliance with instructions (72.5% of respondents) and rarely met the problem when improper drug was selected (39.56% of respondents). Patients taking prescription medicines commonly encounter additional drug therapy problem, and patients taking nonprescription medications commonly encounter problems related to noncompliance with instructions.

Training Moldmakers for Industry.

ERIC Educational Resources Information Center

Allyn, Edward P.

1978-01-01

In 1974, in response to the critical shortage of trained moldmakers, Berkshire Community College (Massachusetts) developed the first two-year college plastic moldmaking and design associate degree curriculum in the United States. The program focuses on the problems encountered in interpreting blueprints and machine set-up instructions in industry.…

Peru: Institutionalizing Quechua

ERIC Educational Resources Information Center

Lagoria, Consuelo Alfaro; Ballon, Lourdes Zegarra

1976-01-01

Discusses the 1975 decision of the Peruvian government to designate Quechua as an official language. Specific programs carried out as a result of this law are analyzed and assessed with respect to their effects and implications. The problems encountered in producing instructional materials for languages which are fragmented into dialects are…

The ESA mission to Comet Halley

NASA Technical Reports Server (NTRS)

Reinhard, R.

1981-01-01

The Europeon Space Agency's approximately Giotto mission plans for a launch in July 1985 with a Halley encounter in mid-March 1986 4 weeks after the comet's perihelion passage. Giotto carries 10 scientific experiments, a camera, neutral, ion and dust mass spectrometers, a dust impact detector system, various plasma analyzers, a magnetometer and an optical probe. The instruments are described, the principles on which they are based are described, and the experiment key performance data are summarized. The launch constraints the helicentric transfer trajectory, and the encounter scenario are analyzed. The Giotto spacecraft major design criteria, spacecraft subsystem and the ground system are described. The problem of hypervelocity dust particle impacts in the innermost part of the coma, the problem of spacecraft survival, and the adverse effects of impact-generated plasma aroung the spacecraft are considered.

Tankless Water Heater

NASA Technical Reports Server (NTRS)

1997-01-01

Kennedy Space Center specialists aided Space, Energy, Time Saving (SETS) Systems, Inc. in working out the problems they encountered with their new electronic "tankless" water heater. The flow switch design suffered intermittent problems. Hiring several testing and engineering firms produced only graphs, printouts, and a large expense, but no solutions. Then through the Kennedy Space Center/State of Florida Technology Outreach Program, SETS was referred to Michael Brooks, a 21-year space program veteran and flowmeter expert. Run throughout Florida to provide technical service to businesses at no cost, the program applies scientific and engineering expertise originally developed for space applications to the Florida business community. Brooks discovered several key problems, resulting in a new design that turned out to be simpler, yielding a 63 percent reduction in labor and material costs over the old design.

Fix and forget or fix and report: a qualitative study of tensions at the front line of incident reporting.

PubMed

Hewitt, Tanya Anne; Chreim, Samia

2015-05-01

Practitioners frequently encounter safety problems that they themselves can resolve on the spot. We ask: when faced with such a problem, do practitioners fix it in the moment and forget about it, or do they fix it in the moment and report it? We consider factors underlying these two approaches. We used a qualitative case study design employing in-depth interviews with 40 healthcare practitioners in a tertiary care hospital in Ontario, Canada. We conducted a thematic analysis, and compared the findings with the literature. 'Fixing and forgetting' was the main choice that most practitioners made in situations where they faced problems that they themselves could resolve. These situations included (A) handling near misses, which were seen as unworthy of reporting since they did not result in actual harm to the patient, (B) prioritising solving individual patients' safety problems, which were viewed as unique or one-time events and (C) encountering re-occurring safety problems, which were framed as inevitable, routine events. In only a few instances was 'fixing and reporting' mentioned as a way that the providers dealt with problems that they could resolve. We found that generally healthcare providers do not prioritise reporting if a safety problem is fixed. We argue that fixing and forgetting patient safety problems encountered may not serve patient safety as well as fixing and reporting. The latter approach aligns with recent calls for patient safety to be more preventive. We consider implications for practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Thermo-mechanical design aspects of mercury bombardment ion thrusters.

NASA Technical Reports Server (NTRS)

Schnelker, D. E.; Kami, S.

1972-01-01

The mechanical design criteria are presented as background considerations for solving problems associated with the thermomechanical design of mercury ion bombardment thrusters. Various analytical procedures are used to aid in the development of thruster subassemblies and components in the fields of heat transfer, vibration, and stress analysis. Examples of these techniques which provide computer solutions to predict and control stress levels encountered during launch and operation of thruster systems are discussed. Computer models of specific examples are presented.

Space shuttle holddown post blast shield

NASA Technical Reports Server (NTRS)

Larracas, F. B.

1991-01-01

The original and subsequent designs of the Solid Rocket Booster/Holddown Post blast shield assemblies and their associated hardware are described. It presents the major problems encountered during their early use in the Space Shuttle Program, during the Return-to-Flight Modification Phase, and during their fabrication and validation testing phases. The actions taken to correct the problems are discussed, along with the various concepts now being considered to increase the useful life of the blast shield.

Apollo experience report: Guidance and control systems. Lunar module stabilization and control system

NASA Technical Reports Server (NTRS)

Shelton, D. H.

1975-01-01

A brief functional description of the Apollo lunar module stabilization and control subsystem is presented. Subsystem requirements definition, design, development, test results, and flight experiences are discussed. Detailed discussions are presented of problems encountered and the resulting corrective actions taken during the course of assembly-level testing, integrated vehicle checkout and test, and mission operations. Although the main experiences described are problem oriented, the subsystem has performed satisfactorily in flight.

Preparing Instructional Objectives: Agony or Ecstasy?

ERIC Educational Resources Information Center

Roberts, Wesley K.

This paper 1) discusses the problems encountered in preparing objectives for instructional programs; 2) describes an informal research project in which seven instructional designers working on the same project attempted to determine agreement on an objective; and 3) suggests how to prepare objectives so that difficulties can be minimized. One…

A Reference and Referral System Using Expert System Techniques.

ERIC Educational Resources Information Center

Vickery, Alina; And Others

1987-01-01

Describes PLEXUS, an expert system for information retrieval related to gardening, designed at the University of London for use in public libraries. Focusing on the semantic problems encountered, methods used in artificial intelligence and information science to resolve them are discussed, including classification and facet analysis. (Author/LRW)

Dermatologic Practice: Implications for a Primary Care Residency Curriculum.

ERIC Educational Resources Information Center

Branch, William T., Jr.; And Others

1983-01-01

The problems encountered, diagnostic procedures performed, and treatments prescribed in dermatology were studied in a primary care practice and in a dermatology clinic. It is proposed that the findings of this study be the basis for designing a curriculum in dermatology for residents in primary care medicine. (Author/MLW)

An Optimum Strategy for Learning to Read Foreign Scientific and Technical Literature.

ERIC Educational Resources Information Center

Alford, M.H.T.

A report on a series of computer programs being written to make frequency counts designed to indicate the learning problems to be encountered in any approach to a target literature discusses how these programs can be used to aid in foreign language vocabulary learning. (Author/AF)

Cost Analysis for Educational Program Evaluation.

ERIC Educational Resources Information Center

Haller, Emil J.

Concerned with the problem of determining program costs as part of the evaluation process, this article helps the practitioner arrive at useful conceptions of the term "cost" and procedures for assessing the costs of an educational program. Its purpose is to help design costing procedures for evaluation situations that are commonly encountered. An…

George A. Towns Elementary School. Atlanta, Georgia

ERIC Educational Resources Information Center

Burt, Ralph H.

1976-01-01

A project testing solar heating and cooling in an existing building, the George A. Towns Elementary School, is intended to provide information on system design and performance, allow the identification and correction of problems encountered in installing large units, and gauge community/user reaction to solar equipment. (Author/MLF)

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320.

PubMed

Sarter, N B; Woods, D D

1997-12-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

Team play with a powerful and independent agent: operational experiences and automation surprises on the Airbus A-320

NASA Technical Reports Server (NTRS)

Sarter, N. B.; Woods, D. D.

1997-01-01

Research and operational experience have shown that one of the major problems with pilot-automation interaction is a lack of mode awareness (i.e., the current and future status and behavior of the automation). As a result, pilots sometimes experience so-called automation surprises when the automation takes an unexpected action or fails to behave as anticipated. A lack of mode awareness and automation surprises can he viewed as symptoms of a mismatch between human and machine properties and capabilities. Changes in automation design can therefore he expected to affect the likelihood and nature of problems encountered by pilots. Previous studies have focused exclusively on early generation "glass cockpit" aircraft that were designed based on a similar automation philosophy. To find out whether similar difficulties with maintaining mode awareness are encountered on more advanced aircraft, a corpus of automation surprises was gathered from pilots of the Airbus A-320, an aircraft characterized by high levels of autonomy, authority, and complexity. To understand the underlying reasons for reported breakdowns in human-automation coordination, we also asked pilots about their monitoring strategies and their experiences with and attitude toward the unique design of flight controls on this aircraft.

California residential energy standards: problems and recommendations relating to implementation, enforcement, and design. [Thermal insulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-08-01

Documents relevant to the development and implementation of the California energy insulation standards for new residential buildings were evaluated and a survey was conducted to determine problems encountered in the implementation, enforcement, and design aspects of the standards. The impact of the standards on enforcement agencies, designers, builders and developers, manufacturers and suppliers, consumers, and the building process in general is summarized. The impact on construction costs and energy savings varies considerably because of the wide variation in prior insulation practices and climatic conditions in California. The report concludes with a series of recommendations covering all levels of government andmore » the building process. (MCW)« less

Design criteria of the bolometer diagnostic for steady-state operation of the W7-X stellaratora)

NASA Astrophysics Data System (ADS)

Zhang, D.; Burhenn, R.; Koenig, R.; Giannone, L.; Grodzki, P. A.; Klein, B.; Grosser, K.; Baldzuhn, J.; Ewert, K.; Erckmann, V.; Hirsch, M.; Laqua, H. P.; Oosterbeek, J. W.

2010-10-01

A bolometric diagnostic system with features necessary for steady-state operation in the superconducting stellarator W7-X was designed. During a pulse length of 1800 s with an ECRH (electron cyclotron resonance heating) power of 10 MW, the components suffer not only from a large thermal load but also from stray radiation of the nonabsorbed isotropic microwaves. This paper gives an overview of the technical problems encountered during the design work and the solutions to individual problems to meet the special requirements in W7-X, e.g., component thermal protection, detector offset thermal drift suppression, as well as a microwave shielding technique.

Retention and application of Skylab experiment experiences to future programs

NASA Technical Reports Server (NTRS)

Milly, N.; Gillespie, V. G.

1974-01-01

Problems encountered on Skylab Experiments are listed in order that these experiences and associated recommendations might help to prevent similar problems on future programs. The criteria for selection of the data to be utilized was to identify the problem areas within the Skylab Program which would be of major significance with respect to future programs. Also, the problem had to be unique in that it would help identify to a designer/manufacturer an unforeseen or unanticipated occurrence which could cause failures, delays, or additional cost. Only those unexpected problems that may occur due to the nature of aerospace experiment environmental and operational requirements are included.

Design and Implementation of a Basic Cross-Compiler and Virtual Memory Management System for the TI-59 Programmable Calculator.

DTIC Science & Technology

1983-06-01

previously stated requirements to construct the framework for a software soluticn. It is during this phase of design that lany cf the most critical...the linker would have to be deferred until the compiler was formalized and ir the implementation phase of design. The second problem involved...memory liait was encountered. At this point a segmentation occurred. The memory limits were reset and the combining process continued until another

Some studies on the use of NASTRAN for nuclear power plant structural analysis and design

NASA Technical Reports Server (NTRS)

Setlur, A. V.; Valathur, M.

1973-01-01

Studies made on the use of NASTRAN for nuclear power plant analysis and design are presented. These studies indicate that NASTRAN could be effectively used for static, dynamic and special purpose problems encountered in the design of such plants. Normal mode capability of NASTRAN is extended through a post-processor program to handle seismic analysis. Static and dynamic substructuring is discussed. Extension of NASTRAN to include the needs in the civil engineering industry is discussed.

Exact solution for an optimal impermeable parachute problem

NASA Astrophysics Data System (ADS)

Lupu, Mircea; Scheiber, Ernest

2002-10-01

In the paper there are solved direct and inverse boundary problems and analytical solutions are obtained for optimization problems in the case of some nonlinear integral operators. It is modeled the plane potential flow of an inviscid, incompressible and nonlimited fluid jet, witch encounters a symmetrical, curvilinear obstacle--the deflector of maximal drag. There are derived integral singular equations, for direct and inverse problems and the movement in the auxiliary canonical half-plane is obtained. Next, the optimization problem is solved in an analytical manner. The design of the optimal airfoil is performed and finally, numerical computations concerning the drag coefficient and other geometrical and aerodynamical parameters are carried out. This model corresponds to the Helmholtz impermeable parachute problem.

Design of Mariner 9 Science Sequences using Interactive Graphics Software

NASA Technical Reports Server (NTRS)

Freeman, J. E.; Sturms, F. M, Jr.; Webb, W. A.

1973-01-01

This paper discusses the analyst/computer system used to design the daily science sequences required to carry out the desired Mariner 9 science plan. The Mariner 9 computer environment, the development and capabilities of the science sequence design software, and the techniques followed in the daily mission operations are discussed. Included is a discussion of the overall mission operations organization and the individual components which played an essential role in the sequence design process. A summary of actual sequences processed, a discussion of problems encountered, and recommendations for future applications are given.

Apollo experience report: Lunar module environmental control subsystem

NASA Technical Reports Server (NTRS)

Gillen, R. J.; Brady, J. C.; Collier, F.

1972-01-01

A functional description of the environmental control subsystem is presented. Development, tests, checkout, and flight experiences of the subsystem are discussed; and the design fabrication, and operational difficulties associated with the various components and subassemblies are recorded. Detailed information is related concerning design changes made to, and problems encountered with, the various elements of the subsystem, such as the thermal control water sublimator, the carbon dioxide sensing and control units, and the water section. The problems associated with water sterilization, water/glycol formulation, and materials compatibility are discussed. The corrective actions taken are described with the expection that this information may be of value for future subsystems. Although the main experiences described are problem oriented, the subsystem has generally performed satisfactorily in flight.

Reality-Based Decision Cases in ESP Teacher Education: Windows on Practice.

ERIC Educational Resources Information Center

Jackson, Jane

1998-01-01

A rationale and framework for the use of case studies in English for Specific Purposes (ESP) teacher education. It explores why and how reality-based cases can revitalize teacher education programs that are specifically designed to prepare teachers for the problems they could encounter as ESP practitioners. (Author/JL)

Office of Education, Region 7, Guidance and Counseling Project for Adult Basic Education. Phase 2 Report.

ERIC Educational Resources Information Center

Texas Univ., Austin. Extension Teaching and Field Service Bureau.

This report interprets information from the first phase of a Federally funded adult basic educational guidance and counseling project in Texas, Arkansas, Louisiana, New Mexico, and Oklahoma. Findings and conclusions are presented as to the cultural, psychological, and other characteristics of students; problems encountered in designing guidance…

Activities in Planetary Geology for the Physical and Earth Sciences.

ERIC Educational Resources Information Center

D'Alli, Richard, Ed.; Greely, Ronald, Ed.

The activities in this guide deal with concepts in planetary geology, but they can be generalized to illustrate broad problems in the earth sciences. They are designed to supplement or introduce topics usually encountered in earth science courses. The exercises, organized into independent units which can be presented in any order, are appropriate…

DESIGNS FOR TEAM TEACHING IN ENGLISH.

ERIC Educational Resources Information Center

ELKINS, WILLIAM R.; STEVENS, MARTIN

A TEAM-TEACHING EXPERIMENT IN HIGH SCHOOL ENGLISH AND OBSERVATIONS IN THE PROBLEMS ENCOUNTERED BY PLANNERS WERE PRESENTED. ALSO PROMOTION OF MORE EFFECTIVE ABILITY GROUPING AND THE IMPROVEMENT AND ECONOMIZING OF INSTRUCTION WERE EXPLORED. THE CLASSES IN THE STUDY WERE A JUNIOR AND A SENIOR ENGLISH CLASS. EACH HAD 80 STUDENTS, AND EACH WAS COMPOSED…

Migratory Birds. Issue Pac.

ERIC Educational Resources Information Center

Fish and Wildlife Service (Dept. of Interior), Washington, DC.

The materials in this educational packet are designed for use with students in grades 4 through 7. They consist of an overview, teaching guides and student data sheets for three activities, and a poster. The overview discusses why, how, where, and when birds migrate as well as problems birds encounter while migrating; the importance of research…

Commitment to Literacy: Another Opportunity for Excellence.

ERIC Educational Resources Information Center

Roth, Audrey J.

English composition teachers in community colleges encounter a wide range of writing abilities and problems in their classes and must provide a great deal of individualized attention to assist students in mastering the process of writing. If teachers of writing are to be able to carry out their designated commitment to literacy for students,…

Teaching Case: Adapting the Access Northwind Database to Support a Database Course

ERIC Educational Resources Information Center

Dyer, John N.; Rogers, Camille

2015-01-01

A common problem encountered when teaching database courses is that few large illustrative databases exist to support teaching and learning. Most database textbooks have small "toy" databases that are chapter objective specific, and thus do not support application over the complete domain of design, implementation and management concepts…

Active Participation in the Literary Encounter.

ERIC Educational Resources Information Center

Twining, James E.

A child's sense of involvement in story and desire to meaningfully experience literature must be sustained and promoted if the problem of "literacy" is to be resolved. Four activities, designed as a series of stages, can enhance the literary experience of children. The first activity is reading to children--exposing them to the language…

DSS 13 microprocessor antenna controller

NASA Technical Reports Server (NTRS)

Gosline, R. M.

1988-01-01

A microprocessor-based antenna monitor and control system with multiple CPUs are described. The system was developed as part of the unattended station project for DSS 13 and was enhanced for use by the SETI project. The operational features, hardware, and software designs are described, and a discussion is provided of the major problems encountered.

Demonstration of the Competency-Based Curriculum for Distributive Education and Distributive Cooperative Training Programs. Final Report.

ERIC Educational Resources Information Center

Marshall Univ., Huntington, WV. Dept. of Occupational, Adult, and Safety Education.

A core curriculum, training plans, and implementation guide developed by the project are included in this final report, which describes activities to resolve problems encountered by teachers using the IDECC (Interstate Distributive Education Curriculum Consortium) system designed for distributive education (DE) and diversified cooperative training…

A Handbook of Environmental Encounters.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem.

This handbook has been designed as a teaching resource to be used in the development of student attitudes and competencies, reflecting an awareness of the environment, and a motivation to work toward solutions to its problems. Listed activities are to be adapted to the abilities and interests of students, school locale, and teaching situation.…

Visual Teaching Model for Introducing Programming Languages

ERIC Educational Resources Information Center

Shehane, Ronald; Sherman, Steven

2014-01-01

This study examines detailed usage of online training videos that were designed to address specific course problems that were encountered in an online computer programming course. The study presents the specifics of a programming course where training videos were used to provide students with a quick start path to learning a new programming…

School Finance and Courts: Does Reform Matter, and How Can We Tell?

ERIC Educational Resources Information Center

Baker, Bruce D.; Welner, Kevin G.

2011-01-01

Background/Context: School finance litigation has often prompted funding reforms, but what happens as a result is the subject of considerable dispute. Purpose: This article explores design problems encountered in studies examining the nature and effects of those reforms. Analysis: After describing the development and current status of school…

Long-Term Stream Monitoring Programs in U.S. Secondary Schools

ERIC Educational Resources Information Center

Overholt, Erin; MacKenzie, Ann Haley

2005-01-01

The authors surveyed 15 secondary school teachers in 5 states about how they designed and implemented long-term stream monitoring in their classrooms and the problems and benefits they encountered. The authors surveyed students involved in the stream monitoring projects to obtain their perspective. Teachers reported that stream monitoring provided…

An introduction to the physics of high energy accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, D.A.; Syphers, J.J.

1993-01-01

This book is an outgrowth of a course given by the authors at various universities and particle accelerator schools. It starts from the basic physics principles governing particle motion inside an accelerator, and leads to a full description of the complicated phenomena and analytical tools encountered in the design and operation of a working accelerator. The book covers acceleration and longitudinal beam dynamics, transverse motion and nonlinear perturbations, intensity dependent effects, emittance preservation methods and synchrotron radiation. These subjects encompass the core concerns of a high energy synchrotron. The authors apparently do not assume the reader has much previous knowledgemore » about accelerator physics. Hence, they take great care to introduce the physical phenomena encountered and the concepts used to describe them. The mathematical formulae and derivations are deliberately kept at a level suitable for beginners. After mastering this course, any interested reader will not find it difficult to follow subjects of more current interests. Useful homework problems are provided at the end of each chapter. Many of the problems are based on actual activities associated with the design and operation of existing accelerators.« less

The Design of the Automated Serials Accession System at the Library of the Mount Sinai School of Medicine of the City University of New York *

PubMed Central

Lemkau, Henry L.; Straub, John R.

1970-01-01

This paper describes the development of the Automated Serials Accession System. It demonstrates the logic used in the design of the mechanized system and how the problems encountered were handled. The areas of cooperation with the Medical Library Center of New York and the types of programs needed to run the system are explained. PMID:5439906

A rotating electrical transfer device

NASA Technical Reports Server (NTRS)

Porter, R. S.

1985-01-01

The design, development, and performance characteristics of two roll ring configurations - a roll ring being a device used in transferring electrical energy across a continuously rotating or oscillating interface through one or more flexible rolling contacts, or flexures are described. Emphasis is placed on the design problems and solutions encountered during development in the areas of flexure fatigue, contact electroplating, electrical noise, and control of interface geometry. Also, the present status of each configuration is summarized.

DTO-675: Voice Control of the Closed Circuit Television System

NASA Technical Reports Server (NTRS)

Salazar, George; Gaston, Darilyn M.; Haynes, Dena S.

1996-01-01

This report presents the results of the Detail Test Object (DTO)-675 "Voice Control of the Closed Circuit Television (CCTV)" system. The DTO is a follow-on flight of the Voice Command System (VCS) that flew as a secondary payload on STS-41. Several design changes were made to the VCS for the STS-78 mission. This report discusses those design changes, the data collected during the mission, recognition problems encountered, and findings.

A brief conversation analytic communication intervention can change history-taking in the seizure clinic.

PubMed

Jenkins, Laura; Cosgrove, Jeremy; Ekberg, Katie; Kheder, Ammar; Sokhi, Dilraj; Reuber, Markus

2015-11-01

Question design during history-taking has clear implications for patients' ability to share their concerns in general and their seizure experiences in particular. Studies have shown that unusually open questions at the start of the consultation enable patients to display interactional and linguistic markers which may help with the otherwise challenging differentiation of epileptic from nonepileptic seizures (NES). In this study, we compared the problem presentation approach taken by trainee neurologists in outpatient encounters with new patients before and after a one-day conversation analytic training intervention in which doctors were taught to adopt an open format of question design and recognize diagnostically relevant linguistic features. We audio/video-recorded clinical encounters between ten doctors, their patients, and accompanying persons; transcribed the interactions; and carried out quantitative and qualitative analyses. We studied 39 encounters before and 55 after the intervention. Following the intervention, doctors were significantly more likely to use nondirective approaches to soliciting patient accounts of their presenting complaints that invited the patient to describe their problems from their own point of view and gave them better opportunity to determine the initial agenda of the encounter. The time to first interruption by the doctor increased (from 52 to 116 s, p<.001). While patients were given more time to describe their seizure experiences, the overall appointment length did not increase significantly (19 vs 21 min, n.s.). These changes gave patients more conversational space to express their concerns and, potentially, to demonstrate the interactional and linguistic features previously found to help differentiate between epilepsy and NES, without impacting the length of the consultations. Copyright © 2015 Elsevier Inc. All rights reserved.

Influence of structural dynamics on vehicle design - Government view. [of aerospace vehicles

NASA Technical Reports Server (NTRS)

Kordes, E. E.

1977-01-01

Dynamic design considerations for aerospace vehicles are discussed, taking into account fixed wing aircraft, rotary wing aircraft, and launch, space, and reentry vehicles. It is pointed out that space vehicles have probably had the most significant design problems from the standpoint of structural dynamics, because their large lightweight structures are highly nonlinear. Examples of problems in the case of conventional aircraft include the flutter encountered by high performance military aircraft with external stores. A description is presented of a number of examples which illustrate the direction of present efforts for improving aircraft efficiency. Attention is given to the results of studies on the structural design concepts for the arrow-wing supersonic cruise aircraft configuration and a system study on low-wing-loading, short haul transports.

Challenges in conducting qualitative research in health: A conceptual paper.

PubMed

Khankeh, Hamidreza; Ranjbar, Maryam; Khorasani-Zavareh, Davoud; Zargham-Boroujeni, Ali; Johansson, Eva

2015-01-01

Qualitative research focuses on social world and provides the tools to study health phenomena from the perspective of those experiencing them. Identifying the problem, forming the question, and selecting an appropriate methodology and design are some of the initial challenges that researchers encounter in the early stages of any research project. These problems are particularly common for novices. This article describes the practical challenges of using qualitative inquiry in the field of health and the challenges of performing an interpretive research based on professional experience as a qualitative researcher and on available literature. One of the main topics discussed is the nature of qualitative research, its inherent challenges, and how to overcome them. Some of those highlighted here include: identification of the research problem, formation of the research question/aim, and selecting an appropriate methodology and research design, which are the main concerns of qualitative researchers and need to be handled properly. Insights from real-life experiences in conducting qualitative research in health reveal these issues. The paper provides personal comments on the experiences of a researcher in conducting pure qualitative research in the field of health. It offers insights into the practical difficulties encountered when performing qualitative studies and offers solutions and alternatives applied by these authors, which may be of use to others.

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 2: Ground operations problems

NASA Technical Reports Server (NTRS)

Waldrop, Glen S.

1990-01-01

Operations problems and cost drivers were identified for current propulsion systems and design and technology approaches were identified to increase the operational efficiency and to reduce operations costs for future propulsion systems. To provide readily usable data for the ALS program, the results of the OEPSS study were organized into a series of OEPSS Data Books. This volume presents a detailed description of 25 major problems encountered during launch processing of current expendable and reusable launch vehicles. A concise description of each problem and its operational impact on launch processing is presented, along with potential solutions and technology recommendation.

A clinically useful diabetes electronic medical record: lessons from the past; pointers toward the future.

PubMed

Gorman, C; Looker, J; Fisk, T; Oelke, W; Erickson, D; Smith, S; Zimmerman, B

1996-01-01

We have analysed the deficiencies of paper medical records in facilitating the care of patients with diabetes and have developed an electronic medical record that corrects some of them. The diabetes electronic medical record (DEMR) is designed to facilitate the work of a busy diabetes clinic. Design principles include heavy reliance on graphic displays of laboratory and clinical data, consistent color coding and aggregation of data needed to facilitate the different types of clinical encounter (initial consultation, continuing care visit, insulin adjustment visit, dietitian encounter, nurse educator encounter, obstetric patient, transplant patient, visits for problems unrelated to diabetes). Data input is by autoflow from the institutional laboratories, by desk attendants or on-line by all users. Careful attention has been paid to making data entry a point and click process wherever possible. Opportunity for free text comment is provided on every screen. On completion of the encounter a narrative text summary of the visit is generated by the computer and is annotated by the care giver. Currently there are about 7800 patients in the system. Remaining challenges include the adaptation of the system to accommodate the occasional user, development of portable laptop derivatives that remain compatible with the parent system and improvements in the screen structure and graphic display formats.

Urological considerations in space medicine.

NASA Technical Reports Server (NTRS)

Cockett, A. T. K.; Adey, W. R.; Roberts, A. P.

1972-01-01

Urological problems encountered during the preparation phases of Biosatellite III, flight of Bonny the Space Monkey, are detailed. The solution to each problem is detailed. The catheter system employed, antibiotic coverage used, and bacteria encountered in the urine of the five animals are detailed. Urinary calcium levels in three ground based animals are illustrated. Testicular alterations encountered in all animals are mentioned. It is concluded that space flights of duration beyond nine days may present serious problems of a urological nature.

International disaster research

NASA Technical Reports Server (NTRS)

Silverstein, Martin Elliot

1991-01-01

No existing telecommunications system can be expected to provide strategy and tactics appropriate to the complex, many faceted problem of disaster. Despite the exciting capabilities of space, communications, remote sensing, and the miracles of modern medicine, complete turnkey transfers to the disaster problem do not make the fit, and cannot be expected to do so. In 1980, a Presidential team assigned the mission of exploring disaster response within the U.S. Federal Government encountered an unanticipated obstacle: disaster was essentially undefined. In the absence of a scientifically based paradigm of disaster, there can be no measure of cost effectiveness, optimum design of manpower structure, or precise application of any technology. These problems spawned a 10-year, multidisciplinary study designed to define the origins, anatomy, and necessary management techniques for catastrophes. The design of the study necessarily reflects interests and expertise in disaster medicine, emergency medicine, telecommunications, computer communications, and forencsic sciences. This study is described.

Linking guidelines to Electronic Health Record design for improved chronic disease management.

PubMed

Barretto, Sistine A; Warren, Jim; Goodchild, Andrew; Bird, Linda; Heard, Sam; Stumptner, Markus

2003-01-01

The promise of electronic decision support to promote evidence based practice remains elusive in the context of chronic disease management. We examine the problem of achieving a close relationship of Electronic Health Record (EHR) content to other components of a clinical information system (guidelines, decision support and workflow), particularly linking the decisions made by providers back to the guidelines. We use the openEHR architecture, which allows extension of a core Reference Model via Archetypes to refine the detailed information recording options for specific classes of encounter. We illustrate the use of openEHR for tracking the relationship of a series of clinical encounters to a guideline via a case study of guideline-compliant treatment of hypertension in diabetes. This case study shows the contribution guideline content can have on problem-specific EHR structure and demonstrates the potential for a constructive interaction of electronic decision support and the EHR.

Linking Guidelines to Electronic Health Record Design for Improved Chronic Disease Management

PubMed Central

Barretto, Sistine A.; Warren, Jim; Goodchild, Andrew; Bird, Linda; Heard, Sam; Stumptner, Markus

2003-01-01

The promise of electronic decision support to promote evidence based practice remains elusive in the context of chronic disease management. We examine the problem of achieving a close relationship of Electronic Health Record (EHR) content to other components of a clinical information system (guidelines, decision support and work-flow), particularly linking the decisions made by providers back to the guidelines. We use the openEHR architecture, which allows extension of a core Reference Model via Archetypes to refine the detailed information recording options for specific classes of encounter. We illustrate the use of openEHR for tracking the relationship of a series of clinical encounters to a guideline via a case study of guideline-compliant treatment of hypertension in diabetes. This case study shows the contribution guideline content can have on problem-specific EHR structure and demonstrates the potential for a constructive interaction of electronic decision support and the EHR. PMID:14728135

Earth resources ground data handling systems for the 1980's

NASA Technical Reports Server (NTRS)

Vanvleck, E. M.; Sinclair, K. F.; Pitts, S. W.; Slye, R. E.

1973-01-01

The system requirements of an operational data handling system for earth resources in the decade of the 1980's are investigated. Attention is drawn to problems encountered in meeting the stringent agricultural user requirements of that time frame. Such an understanding of requirements is essential not only in designing the ground system that will ultimately handle the data, but also in design studies of the earth resources platform, sensors, and data relay satellites which may be needed.

Statistical complex fatigue data for SAE 4340 steel and its use in design by reliability

NASA Technical Reports Server (NTRS)

Kececioglu, D.; Smith, J. L.

1970-01-01

A brief description of the complex fatigue machines used in the test program is presented. The data generated from these machines are given and discussed. Two methods of obtaining strength distributions from the data are also discussed. Then follows a discussion of the construction of statistical fatigue diagrams and their use in designing by reliability. Finally, some of the problems encountered in the test equipment and a corrective modification are presented.

The Apollo Experience Lessons Learned for Constellation Lunar Dust Management

NASA Technical Reports Server (NTRS)

Wagner, Sandra

2008-01-01

In 2008, NASA was embarking on its Exploration Vision, knowing that many technical challenges would be encountered. For lunar exploration missions, one challenge was to learn to manage lunar dust. References to problems associated with lunar dust during the Apollo Program were found on many of pages of the mission reports and technical debriefs. All engineers designing hardware that would come into contact with lunar dust had to mitigate its effects in the design.

Job Ideas for Today's Woman.

ERIC Educational Resources Information Center

Lembeck, Ruth

A women entering the job market for the first time, getting back to it, or changing jobs can encounter many problems. This step-by-step guide is designed to make this task easier. Of the 1,000 jobs listed there are several special interest areas covered: foods, parties, retailing, direct or mail-order selling, real estate, insurance, animals,…

Material Encounters with Mathematics: The Case for Museum Based Cross-Curricular Integration

ERIC Educational Resources Information Center

de Freitas, Elizabeth; Bentley, Sean J.

2012-01-01

This paper reports on research from a network of high school and museum partnerships designed to explore techniques for integrating mathematics and physics learning experiences during the first year of high school. The foundation of the curriculum is a problem-based, museum-based, and hands-on approach to mathematics and physics. In this paper, we…

Digital signal processing in microwave radiometers

NASA Technical Reports Server (NTRS)

Lawrence, R. W.; Stanley, W. D.; Harrington, R. F.

1980-01-01

A microprocessor based digital signal processing unit has been proposed to replace analog sections of a microwave radiometer. A brief introduction to the radiometer system involved and a description of problems encountered in the use of digital techniques in radiometer design are discussed. An analysis of the digital signal processor as part of the radiometer is then presented.

"A" Is for Applesauce. Alternate HIV/AIDS Educational Unit: Recognizing Prejudice.

ERIC Educational Resources Information Center

Iowa State Dept. of Education, Des Moines.

This manual was designed to help teachers of the early secondary grades deal with fear, ignorance, and prejudice in students encountering the problem of Acquired Immune Deficiency Syndrome (AIDS) and its transmission. Three groups of students are of particular concern: those who are victims of abusive remarks, those who feel AIDS is reserved for…

"A Cellular Encounter": Constructing the Cell as a Whole System Using Illustrative Models

ERIC Educational Resources Information Center

Cohen, Joel I.

2014-01-01

A standard part of biology curricula is a project-based assessment of cell structure and function. However, these are often individual assignments that promote little problem-solving or group learning and avoid the subject of organelle chemical interactions. I evaluate a model-based cell project designed to foster group and individual guided…

Study Healthy Ageing and Intellectual Disabilities: Recruitment and Design

ERIC Educational Resources Information Center

Hilgenkamp, Thessa I. M.; Bastiaanse, Luc P.; Hermans, Heidi; Penning, Corine; van Wijck, Ruud; Evenhuis, Heleen M.

2011-01-01

Problems encountered in epidemiologic health research in older adults with intellectual disabilities (ID) are how to recruit a large-scale sample of participants and how to measure a range of health variables in such a group. This cross-sectional study into healthy ageing started with founding a consort of three large care providers with a total…

The Library Manager's Deskbook: 102 Expert Solutions to 101 Common Dilemmas.

ERIC Educational Resources Information Center

Carson, Paula Phillips; And Others

This is a handbook of advice for handling the everyday problems encountered in all types and sizes of libraries. It is designed to assist managers before, during, and after crises develop. Organized in an question-and-answer format, it tackles many dilemmas that can occur in the library, then offers solutions drawn from actual experience. The…

Designing a Personalized Guide Recommendation System to Mitigate Information Overload in Museum Learning

ERIC Educational Resources Information Center

Huang, Yong-Ming; Liu, Chien-Hung; Lee, Chun-Yi; Huang, Yueh-Min

2012-01-01

Museum learning has received a lot of attention in recent years. Museum learning refers to people's use of museums to acquire knowledge. However, a problem with information overload has caused in engaging in such learning. Information overload signifies that users encounter a mass of information and need to determine whether certain information…

Science and Technology Teachers' Views about the Causes of Laboratory Accidents

ERIC Educational Resources Information Center

Aydogdu, Cemil

2015-01-01

The aim of this study was to determine science and technology teachers' views about the causes of the problems encountered in laboratories. In this research, phenomenology, a qualitative research design, was used. 21 science and technology teachers who were working in elementary schools in Eskisehir during the 2010-2011 spring semester were the…

Solar heating and hot water system installed at Alderson Broaddus College, Philippi, West Virginia

NASA Technical Reports Server (NTRS)

1981-01-01

Data needed necessary to evaluate the design and operation of a solar energy heating and hot water system installed in a commercial application are presented. The information includes system descriptions, acceptance test data, schematics, as built drawing, problems encountered, all solutions and photographs of the system at various stages of completion.

Identification and Management of Information Problems by Emergency Department Staff

PubMed Central

Murphy, Alison R.; Reddy, Madhu C.

2014-01-01

Patient-care teams frequently encounter information problems during their daily activities. These information problems include wrong, outdated, conflicting, incomplete, or missing information. Information problems can negatively impact the patient-care workflow, lead to misunderstandings about patient information, and potentially lead to medical errors. Existing research focuses on understanding the cause of these information problems and the impact that they can have on the hospital’s workflow. However, there is limited research on how patient-care teams currently identify and manage information problems that they encounter during their work. Through qualitative observations and interviews in an emergency department (ED), we identified the types of information problems encountered by ED staff, and examined how they identified and managed the information problems. We also discuss the impact that these information problems can have on the patient-care teams, including the cascading effects of information problems on workflow and the ambiguous accountability for fixing information problems within collaborative teams. PMID:25954457

Improved waste water vapor compression distillation technology. [for Spacelab

NASA Technical Reports Server (NTRS)

Johnson, K. L.; Nuccio, P. P.; Reveley, W. F.

1977-01-01

The vapor compression distillation process is a method of recovering potable water from crewman urine in a manned spacecraft or space station. A description is presented of the research and development approach to the solution of the various problems encountered with previous vapor compression distillation units. The design solutions considered are incorporated in the preliminary design of a vapor compression distillation subsystem. The new design concepts are available for integration in the next generation of support systems and, particularly, the regenerative life support evaluation intended for project Spacelab.

Implementation of heaters on thermally actuated spacecraft mechanisms

NASA Technical Reports Server (NTRS)

Busch, John D.; Bokaie, Michael D.

1994-01-01

This paper presents general insight into the design and implementation of heaters as used in actuating mechanisms for spacecraft. Problems and considerations that were encountered during development of the Deep Space Probe and Science Experiment (DSPSE) solar array release mechanism are discussed. Obstacles included large expected fluctuations in ambient temperature, variations in voltage supply levels outgassing concerns, heater circuit design, materials selection, and power control options. Successful resolution of these issues helped to establish a methodology which can be applied to many of the heater design challenges found in thermally actuated mechanisms.

A target design for irradiation of NaI at high beam current.

NASA Technical Reports Server (NTRS)

Blue, J. W.; Sodd, V. J.

1972-01-01

A solution to the targetry problems encountered when the iodine nucleus is a target for cyclotron irradiation is given as a new target design. A target based on this design has been used in 30 microampere irradiations of 46 MeV alpha particles for one-half hour without significant damage. Such an irradiation produces 6 to 7 mCi of Cs-129, an isotope useful in nuclear medicine. This target should also be considered for cyclotron production of the radioisotopes Cs-127, I-123, and Xe-127.

Problems Encountered during the Scientific Research Process in Graduate Education: The Institute of Educational Sciences

ERIC Educational Resources Information Center

Akyürek, Erkan; Afacan, Özlem

2018-01-01

This study was conducted to determine the problems faced by graduate students when conducting scientific research and to make suggestions for solving these problems. The research model was a case study. Semi-structured interviews were conducted with participants in the study with questions about the problems encountered during scientific research…

Response problems in a vacation panel study

Treesearch

Christine A. Vogt; Susan I. Stewart

2001-01-01

This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

Landsat 7 Solar Array Testing Experiences

NASA Technical Reports Server (NTRS)

Helfrich, Daniel

2000-01-01

This paper covers the extensive Landsat 7 solar array flight qualification testing effort. Details of the mechanical design of the solar array and its retention/release system are presented. A testing chronology is provided beginning with the onset of problems encountered at the subsystem level and carrying through the third and final powered-spacecraft ground deployment test. Design fixes and other changes are explained in the same order as they became necessary to flight-qualify the array. Some interesting lessons learned are included along with key references.

Development of an ultra-low-shock separation nut

NASA Technical Reports Server (NTRS)

Woebkenberg, W.; Matteo, D. N.; Williams, V. D.

1982-01-01

The technical problems encountered in the development of an advanced separation nut design are described. The nut is capable of sustaining a large preload and releasing that load with a low level of induced pyrotechnic shock, while demonstrating a tolerance for extremely high shock imposed by other pyrotechnic devices. The analysis of the separation nut was performed to acquire additional understanding of the phenomena affecting operation of the nut and to provide quantitative evaluation of design modification for aerospace applications.

Lessons learned from the SLC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phinney, N.

The SLAC Linear Collider (SLC) is the first example of an entirely new type of lepton collider. Many years of effort were required to develop the understanding and techniques needed to approach design luminosity. This paper discusses some of the key issues and problems encountered in producing a working linear collider. These include the polarized source, techniques for emittance preservation, extensive feedback systems, and refinements in beam optimization in the final focus. The SLC experience has been invaluable for testing concepts and developing designs for a future linear collider.

Modeling and Improving Information Flows in the Development of Large Business Applications

NASA Astrophysics Data System (ADS)

Schneider, Kurt; Lübke, Daniel

Designing a good architecture for an application is a wicked problem. Therefore, experience and knowledge are considered crucial for informing work in software architecture. However, many organizations do not pay sufficient attention to experience exploitation and architectural learning. Many users of information systems are not aware of the options and the needs to report problems and requirements. They often do not have time to describe a problem encountered in sufficient detail for developers to remove it. And there may be a lengthy process for providing feedback. Hence, the knowledge about problems and potential solutions is not shared effectively. Architectural knowledge needs to include evaluative feedback as well as decisions and their reasons (rationale).

USMC Ground Surveillance Robot (GSR): Lessons Learned

NASA Astrophysics Data System (ADS)

Harmon, S. Y.

1987-02-01

This paper describes the design of an autonomous vehicle and the lessons learned during the implementation of that complex robot. The major problems encountered to which solutions were found include sensor processing bandwidth limitations, coordination of the interactions between major subsystems, sensor data fusion and system knowledge representation. Those problems remaining unresolved include system complexity management, the lack of powerful system monitoring and debugging tools, exploratory implementation of a complex system and safety and testing issues. Many of these problems arose from working with underdeveloped and continuously evolving technology and will probably be resolved as the technological resources mature and stabilize. Unfortunately, other problems will continue to plague developers throughout the evolution of autonomous system technology.

How immigrant workers experience workplace problems: a qualitative study.

PubMed

de Castro, Arnold B; Fujishiro, Kaori; Sweitzer, Erica; Oliva, Jose

2006-01-01

In this qualitative study, the authors describe work organization factors, problems workers encounter on the job, consequences of these problems, and actions taken to deal with them. Study participants were immigrant workers seeking assistance at the Chicago Interfaith Workers' Rights Center. Using a grounded theory approach, the investigators coded narratives from 455 records describing workers' problems. Emerged sequences of events were then integrated into a model. Data show that workers' rights are systematically violated and problems are rooted in how jobs are designed and managed. Work organization factors are associated with occupational injury/illness, job loss, and worker actions. Employer responses included indifference and various forms of retaliation. This model provides insight into the work-related troubles immigrants face and informs hypothesis generation and action initiatives.

Situated Cognition, Ecological Perception, and Synergetics: a Novel Perspective for Cognitive Psychology?

NASA Astrophysics Data System (ADS)

Tschacher, Wolfgang; Dauwalder, Jean-Pierre

Cognitive psychology encounters various problems, such as the problem of intentionality, the symbol grounding and representation problems, and the problem of cognitive stability. These problems originate from the mind-body dichotomy; thus, foundational philosophical topics have quite concrete consequences for cognitive psychology and autonomous agents design. We argue that cognitive theory and modeling must account for stability, autonomy or completeness (i.e., should not rely on homunculi), and optimality. A synergetic model is proposed that has the desired properties: Cognition rests upon perception-action cycles. Cognition is viewed as ecological, i.e. it is situated by environmental affordances (valences) which signal energy resources. These cycles have an built-in optimality function because they maximize entropy production by dissipating affordances.

Substance Abuse: A Hidden Problem within the D/deaf and Hard of Hearing Communities

ERIC Educational Resources Information Center

Guthmann, Debra; Graham, Vicki

2004-01-01

Current research indicates that D/deaf and hard of hearing clients seeking treatment for substance abuse often encounter obstacles in receiving the help they need. Many of these obstacles are the result of a lack of knowledge and experience with regard to treating D/deaf and hard of hearing people. Programs designed for hearing people that attempt…

Research, development and demonstration of lead-acid batteries for electric vehicle propulsion

NASA Astrophysics Data System (ADS)

Bowman, D. E.

1983-08-01

Research programs on lead-acid batteries are reported that cover active materials utilization, active material integrity, and some technical support projects. Processing problems were encountered and corrected. Components and materials, a lead-plastic composite grid, cell designs, and deliverables are described. Cell testing is discussed, as well as battery subsystems, including fuel gage, thermal management, and electrolyte circulation.

Adapted Physical Education, Occupational Therapy, and Physical Therapy in the Public School. Procedures and Recommended Guidelines (Revised 1997).

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

This manual is designed to assist Colorado personnel in developing and providing adapted physical education, occupational therapy, and physical therapy to Colorado public school students who have needs in the motor area. Guidelines are presented that have been developed to focus on the problems encountered by students with needs in the physical…

Drilling and production aspects of horizontal wells in the Austin Chalk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheikholeslami, B.A.; Scholhman, B.W.; Seidel, F.A.

1991-07-01

This paper discusses testing of horizontal technology for use in the highly fractured Giddings oil field. Three short-and seven medium-radius wells were drilled successfully in the Austin Chalk formation. The paper discusses well plans, bottomhole assemblies, trajectory control, telemetry, mud systems, hydraulics, hole cleaning, casing design, cementing, problems encountered, formation evaluation, completions, and reservoir response.

Recent Experience of the Application of a Commercial Data Base Management System (ADABAS) to a Scientific Data Bank (ECDIN).

ERIC Educational Resources Information Center

And Others; Town, William G.

1980-01-01

Discusses the problems encountered and solutions adopted in application of the ADABAS database management system to the ECDIN (Environmental Chemicals Data and Information Network) data bank. SIMAS, the pilot system, and ADABAS are compared, and ECDIN ADABAS design features are described. Appendices provide additional facts about ADABAS and SIMAS.…

Challenges in conducting qualitative research in health: A conceptual paper

PubMed Central

Khankeh, Hamidreza; Ranjbar, Maryam; Khorasani-Zavareh, Davoud; Zargham-Boroujeni, Ali; Johansson, Eva

2015-01-01

Background: Qualitative research focuses on social world and provides the tools to study health phenomena from the perspective of those experiencing them. Identifying the problem, forming the question, and selecting an appropriate methodology and design are some of the initial challenges that researchers encounter in the early stages of any research project. These problems are particularly common for novices. Materials and Methods: This article describes the practical challenges of using qualitative inquiry in the field of health and the challenges of performing an interpretive research based on professional experience as a qualitative researcher and on available literature. Results: One of the main topics discussed is the nature of qualitative research, its inherent challenges, and how to overcome them. Some of those highlighted here include: identification of the research problem, formation of the research question/aim, and selecting an appropriate methodology and research design, which are the main concerns of qualitative researchers and need to be handled properly. Insights from real-life experiences in conducting qualitative research in health reveal these issues. Conclusions: The paper provides personal comments on the experiences of a researcher in conducting pure qualitative research in the field of health. It offers insights into the practical difficulties encountered when performing qualitative studies and offers solutions and alternatives applied by these authors, which may be of use to others. PMID:26793245

Skylab thruster attitude control system

NASA Technical Reports Server (NTRS)

Wilmer, G. E., Jr.

1974-01-01

Preflight activities and the Skylab mission support effort for the thruster attitude control system (TACS) are documented. The preflight activities include a description of problems and their solutions encountered in the development, qualification, and flight checkout test programs. Mission support effort is presented as it relates to system performance assessment, real-time problem solving, flight anomalies, and the daily system evaluation. Finally, the detailed flight evaluation is presented for each phase of the mission using system telemetry data. Data assert that the TACS met or exceeded design requirements and fulfilled its assigned mission objectives.

Application of response surface techniques to helicopter rotor blade optimization procedure

NASA Technical Reports Server (NTRS)

Henderson, Joseph Lynn; Walsh, Joanne L.; Young, Katherine C.

1995-01-01

In multidisciplinary optimization problems, response surface techniques can be used to replace the complex analyses that define the objective function and/or constraints with simple functions, typically polynomials. In this work a response surface is applied to the design optimization of a helicopter rotor blade. In previous work, this problem has been formulated with a multilevel approach. Here, the response surface takes advantage of this decomposition and is used to replace the lower level, a structural optimization of the blade. Problems that were encountered and important considerations in applying the response surface are discussed. Preliminary results are also presented that illustrate the benefits of using the response surface.

Mars Exploration Rover Potentiometer Problems, Failures and Lessons Learned

NASA Technical Reports Server (NTRS)

Balzer, Mark

2006-01-01

During qualification testing of three types of non-wire-wound precision potentiometers for the Mars Exploration Rover, a variety of problems and failures were encountered. This paper will describe some of the more interesting problems, detail their investigations and present their final solutions. The failures were found to be caused by design errors, manufacturing errors, improper handling, test errors, and carelessness. A trend of decreasing total resistance was noted, and a resistance histogram was used to identify an outlier. A gang fixture is described for simultaneously testing multiple pots, and real time X-ray imaging was used extensively to assist in the failure analyses. Lessons learned are provided.

Mars Exploration Rover potentiometer problems, failures and lessons learned

NASA Technical Reports Server (NTRS)

Balzer, Mark A.

2006-01-01

During qualification testing of three types of nonwire-wound precision potentiometers for the Mars Exploration Rover, a variety of problems and failures were encountered. This paper will describe some of the more interesting problems, detail their investigations and present their final solutions. The failures were found to be caused by design errors, manufacturing errors, improper handling, test errors, and carelessness. A trend of decreasing total resistance was noted, and a resistance histogram was used to identify an outlier. A gang fixture is described for simultaneously testing multiple pots, and real time X-ray imaging was used extensively to assist in the failure analyses. Lessons learned are provided.

Moneymed: a game to develop management skills in general practice

PubMed Central

Essex, B.; Jackson, R. N.

1981-01-01

A game has been developed to train people in the financial and administrative skills needed for effective general practice management. These skills cover a wide range of legal, economic, administrative and personnel problems encountered in general practice. Thirty-four trainees and six trainers showed a highly significant improvement in knowledge and problem-solving skills after playing the game. The format and design of the game allow the problem type, complexity and solution to vary and to be readily updated. So far, this seems to be one of the most effective instruments yet developed for learning these skills. Imagesp736-a PMID:7338867

Lessons Learned from the Node 1 Atmosphere Control and Storage and Water Recovery and Management Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2010-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Atmosphere Control and Storage (ACS) and Water Recovery and Management (WRM) subsystems and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs.

Lessons Learned From the Development, Operation, and Review of Mechanical Systems on the Space Shuttle, International Space Station, and Payloads

NASA Technical Reports Server (NTRS)

Dinsel, Alison; Jermstad, Wayne; Robertson, Brandan

2006-01-01

The Mechanical Design and Analysis Branch at the Johnson Space Center (JSC) is responsible for the technical oversight of over 30 mechanical systems flying on the Space Shuttle Orbiter and the International Space Station (ISS). The branch also has the responsibility for reviewing all mechanical systems on all Space Shuttle and International Space Station payloads, as part of the payload safety review process, through the Mechanical Systems Working Group (MSWG). These responsibilities give the branch unique insight into a large number of mechanical systems, and problems encountered during their design, testing, and operation. This paper contains narrative descriptions of lessons learned from some of the major problems worked on by the branch during the last two years. The problems are grouped into common categories and lessons learned are stated.

Lessons Learned from the Node 1 Atmosphere Control and Storage and Water Recovery and Management Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2011-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Atmosphere Control and Storage (ACS) and Water Recovery and Management (WRM) subsystems and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs.

Anthropometric accommodation in USAF cockpits

NASA Technical Reports Server (NTRS)

Zehner, Gregory F.

1994-01-01

Over the past three years, a new set of methodologies has been developed to specify and evaluate anthropometric accommodation in USAF crewstation designs. These techniques are used to improve the ability of the pilot to reach controls, to safely escape the aircraft, to achieve adequate mobility and comfort, and to assure full access to the visual field both inside and outside the aircraft. This paper summarized commonly encountered aircraft accommodation problems, explains the failure of the traditional 'percentile man' design concept to resolve these difficulties, and suggests an alternative approach for improving cockpit design to better accommodate today's more heterogeneous flying population.

The design and development of a mounting and jettison assembly for the shuttle orbiter advanced gimbal system

NASA Technical Reports Server (NTRS)

Korzeniowski, E. S.

1983-01-01

This paper describes the requirements, design development, and qualification of the mounting and jettison assembly (MJA) which serves as the base structure for the advanced gimbal system (AGS) developed for NASA, Marshall Space Flight Center, for use during shuttle missions. An engineering model of the MJA has been built and subjected to the following testing: stiffness and modal characterization, sine and random vibration, and a jettison function and energy release. A qualitative summary of the results and the problems encountered during testing, together with the design solutions, is presented.

PFERD Mission: Pluto Flyby Exploration/Research Design

NASA Technical Reports Server (NTRS)

Lemke, Gary; Zayed, Husni; Herring, Jason; Fuehne, Doug; Sutton, Kevin; Sharkey, Mike

1990-01-01

The Pluto Flyby Exploration/Research Design (PFERD) mission will consist of a flyby spacecraft to Pluto and its satellite, Charon. The mission lifetime is expected to be 18 years. The Titan 4 with a Centaur upper stage will be utilized to launch the craft into the transfer orbit. The proposal was divided into six main subsystems: (1) scientific instrumentation; (2) command, communications, and control: (3) altitude and articulation control; (4) power and propulsion; (5) structures and thermal control; and (6) mission management and costing. Tradeoff studies were performed to optimize all factors of design, including survivability, performance, cost, and weight. Problems encountered in the design are also presented.

A Study on the Application of Creative Problem Solving Teaching to Statistics Teaching

ERIC Educational Resources Information Center

Hu, Ridong; Xiaohui, Su; Shieh, Chich-Jen

2017-01-01

Everyone would encounter the life issue of solving complicated problems generated by economic behaviors among all activities for making a living. Various life problems encountered therefore could be generalized by economic statistics. In other words, a lot of important events in daily life are related to economic statistics. For this reason,…

Problems Encountered by Novice Pair Programmers

ERIC Educational Resources Information Center

Hanks, Brian

2008-01-01

In a study of the types of problems encountered by students that led them to seek assistance, Robins et al. [2006] found that the most common problems were related to trivial mechanics. The students in this study worked by themselves on their programming exercises. This article discusses a replication of the Robins et al. study in which the…

Phase change materials handbook

NASA Technical Reports Server (NTRS)

Hale, D. V.; Hoover, M. J.; Oneill, M. J.

1971-01-01

This handbook is intended to provide theory and data needed by the thermal design engineer to bridge the gap between research achievements and actual flight systems, within the limits of the current state of the art of phase change materials (PCM) technology. The relationship between PCM and more conventional thermal control techniques is described and numerous space and terrestrial applications of PCM are discussed. Material properties of the most promising PCMs are provided; the purposes and use of metallic filler materials in PCM composites are presented; and material compatibility considerations relevant to PCM design are included. The engineering considerations of PCM design are described, especially those pertaining to the thermodynamic and heat transfer phenomena peculiar to PCM design. Methods of obtaining data not currently available are presented. The special problems encountered in the space environment are described. Computational tools useful to the designer are discussed. In summary, each aspect of the PCM problem important to the design engineer is covered to the extent allowed by the scope of this effort and the state of the art.

The MJS-77 magnetometer actuator

NASA Technical Reports Server (NTRS)

Stange, W. C.

1977-01-01

A two-position (0 deg and 180 deg) actuating mechanism (flipper) driven by alternately-heated wax motors (pellets) used to rotate the low field triaxial fluxgate magnetometer experiment on the 1977 Mariner Jupiter-Saturn spacecraft to its 0 deg and 180 deg positions is described. The magnetic field, power requirements, weight and volume of this device are discussed. The problems encountered in design and development of this mechanism are presented.

Cancellation Circuit for Transmit-Receive Isolation

DTIC Science & Technology

2010-09-01

non -ideal hardware, and the performance of the circuit is limited. One of the major problems is the leakage from the circulator. The leakage disrupts...cancellation circuit was investigated by a series of simulations using Agilent ADS (Agilent Advanced Design System), and hardware tests were conducted to...developed in the WDDPA application, allowing coherent processing of the data from all elements. There are limitations encountered due to non -ideal

Apollo experience report: Guidance and control systems: Command and service module entry monitor subsystem

NASA Technical Reports Server (NTRS)

Reina, B., Jr.; Patterson, H. G.

1975-01-01

The conceptual aspects of the command and service module entry monitor subsystem, together with an interpretation of the displays and their associated relationship to entry trajectory control, are presented. The entry monitor subsystem is described, and the problems encountered during the developmental phase and the first five manned Apollo flights are discussed in conjunction with the design improvements implemented.

Methods and costs associated with outfitting light aircraft for remote sensing applications

NASA Technical Reports Server (NTRS)

Rhodes, O. L.; Zetka, E. F.

1973-01-01

This document was designed to provide the potential user of a light aircraft remote sensor platform/data gathering system with general information on aircraft definition, implementation complexity, costs, scheduling and operational factors involved in this type of activity. Most of the subject material was developed from actual situations and problem areas encountered during the build-up cycle and early phases of flight operations.

Kerberos authentication: The security answer for unsecured networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.

1995-06-01

Traditional authentication schemes do not properly address the problems encountered with today`s unsecured networks. Kerbmm developed by MIT, on the other hand is designed to operate in an open unsecured network, yet provide good authentication and security including encrypted session traffic. Basic Kerberos principles as well as experiences of the ESnet Authentication Pilot Project with Cross Realm. Authentication between four National Laboratories will also be described.

Concepts for on-board satellite image registration. Volume 2: IAS prototype performance evaluation standard definition

NASA Astrophysics Data System (ADS)

Daluge, D. R.; Ruedger, W. H.

1981-06-01

Problems encountered in testing onboard signal processing hardware designed to achieve radiometric and geometric correction of satellite imaging data are considered. These include obtaining representative image and ancillary data for simulation and the transfer and storage of a large quantity of image data at very high speed. The high resolution, high speed preprocessing of LANDSAT-D imagery is considered.

NASA Perspective on Requirements for Development of Advanced Methods Predicting Unsteady Aerodynamics and Aeroelasticity

NASA Technical Reports Server (NTRS)

Schuster, David M.

2008-01-01

Over the past three years, the National Aeronautics and Space Administration (NASA) has initiated design, development, and testing of a new human-rated space exploration system under the Constellation Program. Initial designs within the Constellation Program are scheduled to replace the present Space Shuttle, which is slated for retirement within the next three years. The development of vehicles for the Constellation system has encountered several unsteady aerodynamics challenges that have bearing on more traditional unsteady aerodynamic and aeroelastic analysis. This paper focuses on the synergy between the present NASA challenges and the ongoing challenges that have historically been the subject of research and method development. There are specific similarities in the flows required to be analyzed for the space exploration problems and those required for some of the more nonlinear unsteady aerodynamic and aeroelastic problems encountered on aircraft. The aggressive schedule, significant technical challenge, and high-priority status of the exploration system development is forcing engineers to implement existing tools and techniques in a design and application environment that is significantly stretching the capability of their methods. While these methods afford the users with the ability to rapidly turn around designs and analyses, their aggressive implementation comes at a price. The relative immaturity of the techniques for specific flow problems and the inexperience with their broad application to them, particularly on manned spacecraft flight system, has resulted in the implementation of an extensive wind tunnel and flight test program to reduce uncertainty and improve the experience base in the application of these methods. This provides a unique opportunity for unsteady aerodynamics and aeroelastic method developers to test and evaluate new analysis techniques on problems with high potential for acquisition of test and even flight data against which they can be evaluated. However, researchers may be required to alter the geometries typically used in their analyses, the types of flows analyzed, and even the techniques by which computational tools are verified and validated. This paper discusses these issues and provides some perspective on the potential for new and innovative approaches to the development of methods to attack problems in nonlinear unsteady aerodynamics.

Issues and Strategies in Solving Multidisciplinary Optimization Problems

NASA Technical Reports Server (NTRS)

Patnaik, Surya

2013-01-01

Optimization research at NASA Glenn Research Center has addressed the design of structures, aircraft and airbreathing propulsion engines. The accumulated multidisciplinary design activity is collected under a testbed entitled COMETBOARDS. Several issues were encountered during the solution of the problems. Four issues and the strategies adapted for their resolution are discussed. This is followed by a discussion on analytical methods that is limited to structural design application. An optimization process can lead to an inefficient local solution. This deficiency was encountered during design of an engine component. The limitation was overcome through an augmentation of animation into optimization. Optimum solutions obtained were infeasible for aircraft and airbreathing propulsion engine problems. Alleviation of this deficiency required a cascading of multiple algorithms. Profile optimization of a beam produced an irregular shape. Engineering intuition restored the regular shape for the beam. The solution obtained for a cylindrical shell by a subproblem strategy converged to a design that can be difficult to manufacture. Resolution of this issue remains a challenge. The issues and resolutions are illustrated through a set of problems: Design of an engine component, Synthesis of a subsonic aircraft, Operation optimization of a supersonic engine, Design of a wave-rotor-topping device, Profile optimization of a cantilever beam, and Design of a cylindrical shell. This chapter provides a cursory account of the issues. Cited references provide detailed discussion on the topics. Design of a structure can also be generated by traditional method and the stochastic design concept. Merits and limitations of the three methods (traditional method, optimization method and stochastic concept) are illustrated. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions can be produced by all the three methods. The variation in the weight calculated by the methods was found to be modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliability traced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Word problems: a review of linguistic and numerical factors contributing to their difficulty

PubMed Central

Daroczy, Gabriella; Wolska, Magdalena; Meurers, Walt Detmar; Nuerk, Hans-Christoph

2015-01-01

Word problems (WPs) belong to the most difficult and complex problem types that pupils encounter during their elementary-level mathematical development. In the classroom setting, they are often viewed as merely arithmetic tasks; however, recent research shows that a number of linguistic verbal components not directly related to arithmetic contribute greatly to their difficulty. In this review, we will distinguish three components of WP difficulty: (i) the linguistic complexity of the problem text itself, (ii) the numerical complexity of the arithmetic problem, and (iii) the relation between the linguistic and numerical complexity of a problem. We will discuss the impact of each of these factors on WP difficulty and motivate the need for a high degree of control in stimuli design for experiments that manipulate WP difficulty for a given age group. PMID:25883575

Constructing complex graphics applications with CLIPS and the X window system

NASA Technical Reports Server (NTRS)

Faul, Ben M.

1990-01-01

This article will demonstrate how the artificial intelligence concepts in CLIPS used to solve problems encountered in the design and implementation of graphics applications within the UNIX-X Window System environment. The design of an extended version of CLIPS, called XCLIPS, is presented to show how the X Windows System graphics can be incorporated without losing DOS compatibility. Using XCLIPS, a sample scientific application is built that applies solving capabilities of both two and three dimensional graphics presentations in conjunction with the standard CLIPS features.

Some design considerations for a synthetic aperture optical telescope array

NASA Astrophysics Data System (ADS)

Scott, P. W.

1984-01-01

Several design considerations inherent in the configuration of phased array transmission of multiwavelength laser beams are discussed. Attention is focused on the U.S.A.F. phased array (PHASAR) demonstration project, where problems have been encountered in dividing the beam(s), controlling the optical path differences between subapertures, and expanding individual beams.A piston-driven path length adjustment mechanism has been selected, along with an active control system and proven components for stability maintenance. The necessity of developing broadband, high reflectivity low phase shift coatings for the system mirrors is stressed.

The design, development, fabrication and testing of two (2) Non-Spin Platforms, (NSP)

NASA Technical Reports Server (NTRS)

1975-01-01

The non spin platform is a means for achieving the very low acceleration requirements for cost effective space processing experiments on research rocket flights. These platforms have a low initial cost, are re-usable and have extremely low refurbishment cost. In order to attain this goal, commercially available components were used and only the necessary quality control standards were imposed. A detailed system description, the very few design problems encountered, the operational procedures (both pre-flight and post-flight), and the maintenance requirements are described.

Baking the first bread in space

NASA Technical Reports Server (NTRS)

1987-01-01

This Getaway Special program is a joint venture between Spar, Monarch flour and Telesat, with Telesat being responsible for the design, manufacture and implementation of the equipment. The purpose of the experiment is to investigate the behavior of bread yeast in the absence of gravity and in the presence of normal atmospheric pressure. The proposed design mixes flour, water and yeast on-orbit, allows the mixture to prove and then bakes it. This paper outlines the development history of the experiment, the various test programs and some of the problems encountered, with their solutions.

Approximation Methods in Multidimensional Filter Design and Related Problems Encountered in Multidimensional System Design.

DTIC Science & Technology

1983-03-21

zero , it is necessary that B M(0) be nonzero. In the case considered here, B M(0) is taken to be nonsingula and withot loss of generality it may be set...452. (c.51 D. Levin, " General order Padd type rational approximants defined from a double power series," J. Inst. Maths. Applics., 18, 1976, pp. 1-8...common zeros in the closed unit bidisc, U- 2 . The 2-D setting provides a nice theoretical framework for generalization of these stabilization results to

Lessons Learned from the Node 1 Temperature and Humidity Control Subsystem Design

NASA Technical Reports Server (NTRS)

Williams, David E.

2010-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Temperature and Humidity Control (THC) subsystem and it will document some of the lessons that have been learned to date for this subsystem and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs. 1

Improving stability margins in discrete-time LQG controllers

NASA Technical Reports Server (NTRS)

Oranc, B. Tarik; Phillips, Charles L.

1987-01-01

Some of the problems are discussed which are encountered in the design of discrete-time stochastic controllers for problems that may adequately be described by the Linear Quadratic Gaussian (LQG) assumptions; namely, the problems of obtaining acceptable relative stability, robustness, and disturbance rejection properties. A dynamic compensator is proposed to replace the optimal full state feedback regulator gains at steady state, provided that all states are measurable. The compensator increases the stability margins at the plant input, which may possibly be inadequate in practical applications. Though the optimal regulator has desirable properties the observer based controller as implemented with a Kalman filter, in a noisy environment, has inadequate stability margins. The proposed compensator is designed to match the return difference matrix at the plant input to that of the optimal regulator while maintaining the optimality of the state estimates as directed by the measurement noise characteristics.

Flight-deck automation - Promises and problems

NASA Technical Reports Server (NTRS)

Wiener, E. L.; Curry, R. E.

1980-01-01

The paper analyzes the role of human factors in flight-deck automation, identifies problem areas, and suggests design guidelines. Flight-deck automation using microprocessor technology and display systems improves performance and safety while leading to a decrease in size, cost, and power consumption. On the other hand negative factors such as failure of automatic equipment, automation-induced error compounded by crew error, crew error in equipment set-up, failure to heed automatic alarms, and loss of proficiency must also be taken into account. Among the problem areas discussed are automation of control tasks, monitoring of complex systems, psychosocial aspects of automation, and alerting and warning systems. Guidelines are suggested for designing, utilising, and improving control and monitoring systems. Investigation into flight-deck automation systems is important as the knowledge gained can be applied to other systems such as air traffic control and nuclear power generation, but the many problems encountered with automated systems need to be analyzed and overcome in future research.

A linear decomposition method for large optimization problems. Blueprint for development

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.

1982-01-01

A method is proposed for decomposing large optimization problems encountered in the design of engineering systems such as an aircraft into a number of smaller subproblems. The decomposition is achieved by organizing the problem and the subordinated subproblems in a tree hierarchy and optimizing each subsystem separately. Coupling of the subproblems is accounted for by subsequent optimization of the entire system based on sensitivities of the suboptimization problem solutions at each level of the tree to variables of the next higher level. A formalization of the procedure suitable for computer implementation is developed and the state of readiness of the implementation building blocks is reviewed showing that the ingredients for the development are on the shelf. The decomposition method is also shown to be compatible with the natural human organization of the design process of engineering systems. The method is also examined with respect to the trends in computer hardware and software progress to point out that its efficiency can be amplified by network computing using parallel processors.

The MJS-77 magnetometer actuator

NASA Technical Reports Server (NTRS)

Stange, W. C.

1977-01-01

A two-position (0 deg and 180 deg) actuating mechanism (flipper) driven by alternately-heated wax motors (pellets) will be used to rotate the low field triaxial fluxgate magnetometer experiment on the 1977 Mariner Jupiter-Saturn spacecraft to its 0 deg and 180 deg positions. The magnetic field, power requirements, weight and volume of this device are very restrictive. The problems encountered in design and development of this mechanism are presented.

New Dimensions for the Online Catalog: The Dartmouth College Library Experience [and] TOC/DOC at Caltech: Evolution of Citation Access Online [and] Locally Loaded Databases in Arizona State University's Online Catalog Using the CARL System.

ERIC Educational Resources Information Center

Klemperer, Katharina; And Others

1989-01-01

Each of three articles describes an academic library's online catalog that includes locally created databases. Topics covered include database and software selection; systems design and development; database producer negotiations; problems encountered during implementation; database loading; training and documentation; and future plans. (CLB)

Development of a Prototype Human Resources Data Handbook for Systems Engineering: An Application to Fire Control Systems. Final Report for Period October 1971-June 1975.

ERIC Educational Resources Information Center

Reed, Lawrence E.; And Others

The methods and problems encountered in the development of a prototype human resources data handbook are discussed. The goal of the research was to determine whether it was feasible to consolidate, in a single comprehensive handbook, human resources data applicable to system design and development. Selected for this purpose were data on the…

Introduction to Geostatistics

NASA Astrophysics Data System (ADS)

Kitanidis, P. K.

1997-05-01

Introduction to Geostatistics presents practical techniques for engineers and earth scientists who routinely encounter interpolation and estimation problems when analyzing data from field observations. Requiring no background in statistics, and with a unique approach that synthesizes classic and geostatistical methods, this book offers linear estimation methods for practitioners and advanced students. Well illustrated with exercises and worked examples, Introduction to Geostatistics is designed for graduate-level courses in earth sciences and environmental engineering.

Concepts for on-board satellite image registration. Volume 2: IAS prototype performance evaluation standard definition. [NEEDS Information Adaptive System

NASA Technical Reports Server (NTRS)

Daluge, D. R.; Ruedger, W. H.

1981-01-01

Problems encountered in testing onboard signal processing hardware designed to achieve radiometric and geometric correction of satellite imaging data are considered. These include obtaining representative image and ancillary data for simulation and the transfer and storage of a large quantity of image data at very high speed. The high resolution, high speed preprocessing of LANDSAT-D imagery is considered.

Atmospheric Disturbance Environment Definition

NASA Technical Reports Server (NTRS)

Tank, William G.

1994-01-01

Traditionally, the application of atmospheric disturbance data to airplane design problems has been the domain of the structures engineer. The primary concern in this case is the design of structural components sufficient to handle transient loads induced by the most severe atmospheric "gusts" that might be encountered. The concern has resulted in a considerable body of high altitude gust acceleration data obtained with VGH recorders (airplane velocity, V, vertical acceleration, G, altitude, H) on high-flying airplanes like the U-2 (Ehernberger and Love, 1975). However, the propulsion system designer is less concerned with the accelerations of the airplane than he is with the airflow entering the system's inlet. When the airplane encounters atmospheric turbulence it responds with transient fluctuations in pitch, yaw, and roll angles. These transients, together with fluctuations in the free-stream temperature and pressure will disrupt the total pressure, temperature, Mach number and angularity of the inlet flow. For the mixed compression inlet, the result is a disturbed throat Mach number and/or shock position, and in extreme cases an inlet unstart can occur (cf. Section 2.1). Interest in the effects of inlet unstart on the vehicle dynamics of large, supersonic airplanes is not new. Results published by NASA in 1962 of wind tunnel studies of the problem were used in support of the United States Supersonic Transport program (SST) (White, at aI, 1963). Such studies continued into the late 1970's. However, in spite of such interest, there never was developed an atmospheric disturbance database for inlet unstart analysis to compare with that available for the structures load analysis. Missing were data for the free-stream temperature and pressure disturbances that also contribute to the unStart problem.

Addressing Problems Encountered in Case-Based Teaching

ERIC Educational Resources Information Center

Turgeon, A. J.

2007-01-01

TURF 436 (Case Studies in Turfgrass Management) is the capstone course for turfgrass science majors at the Pennsylvania State University. Students are introduced to problems and complex problematic situations encountered in the management of golf and sports turf and in professional lawn-care operations. Following completion of the orientation case…

The orbiter mate/demate device

NASA Technical Reports Server (NTRS)

Miller, A. J.; Binkley, W. H.

1985-01-01

The numerous components and systems of the space shuttle orbiter mate/demate device (MDD) are discussed. Special emphasis is given, mechanisms and mechanical systems to discuss in general their requirements, functions, and design; and, where applicable, to relate any unusual problems encountered during the initial concept studies, final design, and construction are discussed. The MDD and its electrical, machinery, and mechanical systems, including the main hoisting system, power operated access service platform, wind restrain and adjustment mechanism, etc., were successfully designed and constructed. The MDD was used routinely during the initial orbiter-747 approach and landing test and the more recent orbiter flight tests recovery and mate operations.

High power, high frequency helix TWT's

NASA Astrophysics Data System (ADS)

Sloley, H. J.; Willard, J.; Paatz, S. R.; Keat, M. J.

The design and performance characteristics of a 34-GHz pulse tube capable of 75 W peak power output at 30 percent duty cycle and a broadband CW tube are presented. Particular attention is given to the engineering problems encountered during the development of the tubes, including the suppression of backward wave oscillation, the design of electron guns for small-diameter high-current beams, and the thermal capability of small helix structures. The discussion also covers the effects of various design parameters and choice of engineering materials on the ultimate practical limit of power and gain at the operating frequencies. Measurements are presented for advanced experimental tubes.

Development of a preprototype vapor compression distillation water recovery subsystem

NASA Technical Reports Server (NTRS)

Johnson, K. L.

1978-01-01

The activities involved in the design, development, and test of a preprototype vapor compression distillation water recovery subsystem are described. This subsystem, part of a larger regenerative life support evaluation system, is designed to recover usable water from urine, urinal rinse water, and concentrated shower and laundry brine collected from three space vehicle crewmen for a period of 180 days without resupply. Details of preliminary design and testing as well as component developments are included. Trade studies, considerations leading to concept selections, problems encountered, and test data are also presented. The rework of existing hardware, subsystem development including computer programs, assembly verification, and comprehensive baseline test results are discussed.

Conquering common breast-feeding problems.

PubMed

Walker, Marsha

2008-01-01

Meeting mothers' personal breast-feeding goals depends on a number of factors, including the timely resolution of any problems she encounters. Nurses are often the first providers who interact with the mother during the perinatal period and are positioned to guide mothers through the prevention and solving of breast-feeding problems. Although many problems may be "common," failure to remedy conditions that cause pain, frustration, and anxiety can lead to premature weaning and avoidance of breast-feeding subsequent children. This article describes strategies and interventions to alleviate common problems that breast-feeding mothers frequently encounter.

Geothermal observation wells, Mt. Hood, Oregon. Final report, October 4, 1977-July 9, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, W.F.; Meyer, H.J.

1979-11-01

Exploration drilling operations were conducted which included the deepening of an existing hole, designated as Old Maid Flat No. 1, from 1850 ft (564 m) to 4002 (1220 m) on the western approaches to Mt. Hood and the drilling of three new holes ranging from 940 ft (287 m) to 1340 ft (409 m). The Clear Fork hole, located in Old Maid Flat, was drilled to 1320 ft (402 m). The Zigzag hole was drilled to 940 ft (287 m) at the southwestern base of Mt. Hood in the Zigzag River valley. The remaining hole was drilled on the Timberlinemore » Lodge grounds which is on the south flank of Mt. Hood at an elevation of about 6000 ft (1829 m) above sea level. The deepening project designated as Old Maid Flat No. 1 encountered a maximum bottom hole temperature of about 180/sup 0/F (82/sup 0/C) and is to this date the deepest exploratory hole in the Mt. Hood vicinity. No significant drilling problems were encountered. The Clear Fork and Zigzag River holes were completed without significant problems. The Timberline Lodge hole encountered severe drilling conditions, including unconsolidated formations. Two strings of tools were left in the hole from structural collapse of the hole. The hole was scheduled as a 2000 ft (610 m) test. Drilling did not proceed beyond 1350 ft (412 m) and due to junk it was unobstructed to a depth of 838 ft (255 m). Observation pipe was installed to 735 ft (224 m) due to further disintegration of the hole. The work was prematurely terminated due to weather conditions.« less

A Study of the Causes of Physical and Emotional Problems Encountered by Older Women Returning to Secretarial Employment After A Prolonged Absence. Final Report.

ERIC Educational Resources Information Center

Lloyd, Glenna G.

The problem of this study was to identify the cause of the physical and emotional problems encountered by older women who have returned to work after a prolonged absence. Such information, it was believed, would be valuable to business and educational institutions in retraining or updating prospective secretarial employees. Data for the study were…

Affirmative Action and Women in Higher Education.

ERIC Educational Resources Information Center

Hazzard, Terry

The purposes of this paper are to: (1) discuss the historical development of women in higher education; (2) describe the implementation of federal policies for women; (3) focus on selected problems encountered by women in the work-place; and (4) offer recommendations and suggestions for eliminating some of the problems that women encounter. The…

Dilemmas in the (un)veiling of the diagnosis of Alzheimer's disease: walking an ethical and professional tight rope.

PubMed

Karnieli-Miller, Orit; Werner, Perla; Aharon-Peretz, Judith; Eidelman, Shmuel

2007-08-01

To enhance the understanding and effect of physician's difficulties, attitudes and communication styles on the disclosure of the diagnosis of AD in practice. Qualitative, phenomenological study, combining pre-encounter interviews with physicians, observations of actual encounters of diagnosis disclosure of AD, and post-encounter interviews. There were various ways or tactics to (un)veil the bad news that may be perceived as different ways of dulling the impact and avoiding full and therefore problematic statements. In the actual encounters this was accomplished by keeping encounters short, avoiding elaboration, confirmation of comprehension and explicit terminology and using fractured sentences. The present study's findings highlight the difficulties encountered in breaking the news about AD, in the way it is actually done, and the problems that may arise from this way of un/veiling the news. The main problem is that the reluctance to make a candid disclosure of the diagnosis as was demonstrated in this study may violate basic moral and legal rights and may also deprive patients and caregivers of some of the benefits of early disclosure of diagnosis. There is a need for assisting physicians to cope with their personal difficulties, problems and pitfalls in breaking the news.

Design and application of gas-gap heat switches

NASA Technical Reports Server (NTRS)

Chan, C. K.; Ross, R. G., Jr.

1990-01-01

Gas-gap heat switches can serve as an effective means of thermally disconnecting a standby cryocooler when the primary (operating) cooler is connected and vice versa. The final phase of the development and test of a cryogenic heat switch designed for loads ranging from 2 watts at 8 K, to 100 watts at 80 K are described. Achieved heat-switch on/off conductance ratio ranged from 11,000 at 8 K to 2200 at 80 K. A particularly challenging element of heat-switch design is achieving satisfactory operation when large temperatures differentials exist across the switch. A special series of tests and analyses was conducted and used in this Phase-2 activity to evaluate the developed switches for temperature differentials ranging up to 200 K. Problems encountered at the maximum levels are described and analyzed, and means of avoiding the problems in the future are presented. A comprehensive summary of the overall heat-switch design methodology is also presented with special emphasis on lessons learned over the course of the 4-year development effort.

A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

NASA Technical Reports Server (NTRS)

Greenhagen, Cheryl

1986-01-01

Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

A new concept for actuating space mechanisms. [for the Mariner Jupiter-Saturn spacecraft magnetometer

NASA Technical Reports Server (NTRS)

Stange, W. C.

1975-01-01

A two position (0 and 180 deg) actuating mechanism driven by two alternately heated opposing flat NITINOL springs is proposed for rotating the low field triaxial fluxgate magnetometer experiment on the 1977 Mariner Jupiter-Saturn spacecraft to its 0 deg and 180 deg positions. The magnetic field, power requirements, weight, and volume of this device are very restrictive. The problems encountered in design and development are presented.

Light aircraft sound transmission study

NASA Technical Reports Server (NTRS)

Atwal, M.; David, J.; Heitman, K.; Crocker, M. J.

1983-01-01

The revived interest in the design of propeller driven aircraft is based on increasing fuel prices as well as on the need for bigger short haul and commuter aircraft. A major problem encountered with propeller driven aircraft is propeller and exhaust noise that is transmitted through the fuselage sidewall structure. Part of the work which was conducted during the period April 1 to August 31, 1983, on the studies of sound transmission through light aircraft walls is presented.

Automation in the graphic arts

NASA Astrophysics Data System (ADS)

Truszkowski, Walt

1995-04-01

The CHIMES (Computer-Human Interaction Models) tool was designed to help solve a simply-stated but important problem, i.e., the problem of generating a user interface to a system that complies with established human factors standards and guidelines. Though designed for use in a fairly restricted user domain, i.e., spacecraft mission operations, the CHIMES system is essentially domain independent and applicable wherever graphical user interfaces of displays are to be encountered. The CHIMES philosophy and operating strategy are quite simple. Instead of requiring a human designer to actively maintain in his or her head the now encyclopedic knowledge that human factors and user interface specialists have evolved, CHIMES incorporates this information in its knowledge bases. When directed to evaluated a design, CHIMES determines and accesses the appropriate knowledge, performs an evaluation of the design against that information, determines whether the design is compliant with the selected guidelines and suggests corrective actions if deviations from guidelines are discovered. This paper will provide an overview of the capabilities of the current CHIMES tool and discuss the potential integration of CHIMES-like technology in automated graphic arts systems.

Chiropractic Observation and Analysis Study (COAST): providing an understanding of current chiropractic practice.

PubMed

French, Simon D; Charity, Melanie J; Forsdike, Kirsty; Gunn, Jane M; Polus, Barbara I; Walker, Bruce F; Chondros, Patty; Britt, Helena C

2013-11-18

COAST (Chiropractic Observation and Analysis Study) aimed to describe the clinical practices of chiropractors in Victoria, Australia. Cross-sectional study using the BEACH (Bettering the Evaluation and Care of Health) methods for general practice. 180 chiropractors in active clinical practice in Victoria were randomly selected from the list of 1298 chiropractors registered on Chiropractors Registration Board of Victoria. Twenty-four chiropractors were ineligible, 72 agreed to participate, and 52 completed the study. Each participating chiropractor documented encounters with up to 100 consecutive patients. For each chiropractor-patient encounter, information collected included patient health profile, patient reasons for encounter, problems and diagnoses, and chiropractic care. Data were collected on 4464 chiropractor-patient encounters from 52 chiropractors between 11 December 2010 and 28 September 2012. In most (71%) encounters, patients were aged 25-64 years; 1% of encounters were with infants (age < 1 year; 95% CI, 0.3%-3.2%). Musculoskeletal reasons for encounter were described by patients at a rate of 60 per 100 encounters (95% CI, 54-67 encounters) and maintenance and wellness or check-up reasons were described at a rate of 39 per 100 encounters (95% CI, 33-47 encounters). Back problems were managed at a rate of 62 per 100 encounters (95% CI, 55-71 encounters). The most frequent care provided by the chiropractors was spinal manipulative therapy and massage. A range of conditions are managed by chiropractors in Victoria, Australia, but most commonly these conditions are musculoskeletal-related. These results can be used by stakeholders of the chiropractic profession in workforce development, education and health care policy.

User-Centered Design for Psychosocial Intervention Development and Implementation

PubMed Central

Lyon, Aaron R.; Koerner, Kelly

2018-01-01

The current paper articulates how common difficulties encountered when attempting to implement or scale-up evidence-based treatments are exacerbated by fundamental design problems, which may be addressed by a set of principles and methods drawn from the contemporary field of user-centered design. User-centered design is an approach to product development that grounds the process in information collected about the individuals and settings where products will ultimately be used. To demonstrate the utility of this perspective, we present four design concepts and methods: (a) clear identification of end users and their needs, (b) prototyping/rapid iteration, (c) simplifying existing intervention parameters/procedures, and (d) exploiting natural constraints. We conclude with a brief design-focused research agenda for the developers and implementers of evidence-based treatments. PMID:29456295

Students’ Mathematical Literacy in Solving PISA Problems Based on Keirsey Personality Theory

NASA Astrophysics Data System (ADS)

Masriyah; Firmansyah, M. H.

2018-01-01

This research is descriptive-qualitative research. The purpose is to describe students’ mathematical literacy in solving PISA on space and shape content based on Keirsey personality theory. The subjects are four junior high school students grade eight with guardian, artisan, rational or idealist personality. Data collecting methods used test and interview. Data of Keirsey Personality test, PISA test, and interview were analysed. Profile of mathematical literacy of each subject are described as follows. In formulating, guardian subject identified mathematical aspects are formula of rectangle area and sides length; significant variables are terms/conditions in problem and formula of ever encountered question; translated into mathematical language those are measurement and arithmetic operations. In employing, he devised and implemented strategies using ease of calculation on area-subtraction principle; declared truth of result but the reason was less correct; didn’t use and switch between different representations. In interpreting, he declared result as area of house floor; declared reasonableness according measurement estimation. In formulating, artisan subject identified mathematical aspects are plane and sides length; significant variables are solution procedure on both of daily problem and ever encountered question; translated into mathematical language those are measurement, variables, and arithmetic operations as well as symbol representation. In employing, he devised and implemented strategies using two design comparison; declared truth of result without reason; used symbol representation only. In interpreting, he expressed result as floor area of house; declared reasonableness according measurement estimation. In formulating, rational subject identified mathematical aspects are scale and sides length; significant variables are solution strategy on ever encountered question; translated into mathematical language those are measurement, variable, arithmetic operation as well as symbol and graphic representation. In employing, he devised and implemented strategies using additional plane forming on area-subtraction principle; declared truth of result according calculation process; used and switched between symbol and graphic representation. In interpreting, he declared result as house area within terrace and wall; declared reasonableness according measurement estimation. In formulating, idealist subject identified mathematical aspects are sides length; significant variables are terms/condition in problem; translated into mathematical language those are measurement, variables, arithmetic operations as well as symbol and graphic representation. In employing, he devised and implemented strategies using trial and error and two design in process of finding solutions; declared truth of result according the use of two design of solution; used and switched between symbol and graphic representation. In interpreting, he declared result as floor area of house; declared reasonableness according measurement estimation.

The Problem-Based Learning Process: Reflections of Pre-Service Elementary School Teachers

ERIC Educational Resources Information Center

Baysal, Zeliha Nurdan

2017-01-01

This study aims to identify the benefits acquired by third-year pre-service elementary school teachers participating in a problem-based learning process in social studies education, the issues they encountered in that process and those they are likely to encounter, and their feelings about the process. Semi-structured interviews were used as one…

X-31 high angle of attack control system performance

NASA Technical Reports Server (NTRS)

Huber, Peter; Seamount, Patricia

1994-01-01

The design goals for the X-31 flight control system were: (1) level 1 handling qualities during post-stall maneuvering (30 to 70 degrees angle-of-attack); (2) thrust vectoring to enhance performance across the flight envelope; and (3) adequate pitch-down authority at high angle-of-attack. Additional performance goals are discussed. A description of the flight control system is presented, highlighting flight control system features in the pitch and roll axes and X-31 thrust vectoring characteristics. The high angle-of-attack envelope clearance approach will be described, including a brief explanation of analysis techniques and tools. Also, problems encountered during envelope expansion will be discussed. This presentation emphasizes control system solutions to problems encountered in envelope expansion. An essentially 'care free' envelope was cleared for the close-in-combat demonstrator phase. High angle-of-attack flying qualities maneuvers are currently being flown and evaluated. These results are compared with pilot opinions expressed during the close-in-combat program and with results obtained from the F-18 HARV for identical maneuvers. The status and preliminary results of these tests are discussed.

Embodiment design for a multipropellant resistojet

NASA Technical Reports Server (NTRS)

Bao, Johnny; Chilosi, Thierry; Goodwin, Jason; Mocio, Jim; Yeh, Bruce

1993-01-01

This document presents the design of a multipropellant resistojet to use as an auxiliary propulsion system on the Space Station. Such a system is necessary to counteract atmospheric drag effects encountered by the Station in its orbit. NASA specifications are strictly followed with emphasis on reliability, operating life, multipropellant capability, and exhaust emission control. Several design variants are considered, and the final solution is a resistojet with an electronic pressure regulator, variable control, an internal flow heater, and a conical nozzle. To construct the resistojet, the important components are resolved independently and then integrated with secondary units. The document also includes engineering drawings of the final design with assembly instructions. Before final utilization, a prototype testing is recommended to uncover possible problems.

The Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) yo-yo despin and solar array deployment mechanism

NASA Technical Reports Server (NTRS)

Kellogg, James W.

1993-01-01

The SAMPEX spacecraft, successfully launched in July 1992, carried a yo-yo despin system and deployable solar arrays. The despin and solar array mechanisms formed an integral system as the yo-yo cables held the solar array release mechanism in place. The SAMPEX design philosophy was to minimize size and weight through the use of a predominantly single string system. The design challenge was to build a system in a limited space, which was reliable with minimal redundancy. This paper covers the design and development of the SAMPEX yo-yo despin and solar array deployment mechanisms. The problems encountered during development and testing will also be discussed.

An echelle spectrograph for middle ultraviolet solar spectroscopy from rockets.

PubMed

Tousey, R; Purcell, J D; Garrett, D L

1967-03-01

An echelle grating spectrograph is ideal for use in a rocket when high resolution is required becaus itoccupies a minimum of space. The instrument described covers the range 4000-2000 A with a resolution of 0.03 A. It was designed to fit into the solar biaxial pointing-control section of an Aerobee-150 rocket. The characteristics of the spectrograph are illustrated with laboratory spectra of iron and carbon are sources and with solar spectra obtained during rocket flights in 1961 and 1964. Problems encountered in analyzing the spectra are discussed. The most difficult design problem was the elimination of stray light when used with the sun. Of the several methods investigated, the most effective was a predispersing system in the form of a zero-dispersion double monochromator. This was made compact by folding the beam four times.

Describing the content of primary care: limitations of Canadian billing data.

PubMed

Katz, Alan; Halas, Gayle; Dillon, Michael; Sloshower, Jordan

2012-02-15

Primary health care systems are designed to provide comprehensive patient care. However, the ICD 9 coding system used for billing purposes in Canada neither characterizes nor captures the scope of clinical practice or complexity of physician-patient interactions. This study aims to describe the content of primary care clinical encounters and examine the limitations of using administrative data to capture the content of these visits. Although a number of U.S studies have described the content of primary care encounters, this is the first Canadian study to do so. Study-specific data collection forms were completed by 16 primary care physicians in community health and family practice clinics in Winnipeg, Manitoba, Canada. The data collection forms were completed immediately following the patient encounter and included patient and visit characteristics, such as primary reason for visit, topics discussed, actions taken, degree of complexity as well as diagnosis and ICD-9 codes. Data was collected for 760 patient encounters. The diagnostic codes often did not reflect the dominant topic of the visit or the topic requiring the most amount of time. Physicians often address multiple problems and provide numerous services thus increasing the complexity of care. This is one of the first Canadian studies to critically analyze the content of primary care clinical encounters. The data allowed a greater understanding of primary care clinical encounters and attests to the deficiencies of singular ICD-9 coding which fails to capture the comprehensiveness and complexity of the primary care encounter. As primary care reform initiatives in the U.S and Canada attempt to transform the way family physicians deliver care, it becomes increasingly important that other tools for structuring primary care data are considered in order to help physicians, researchers and policy makers understand the breadth and complexity of primary care.

What is a medical decision? A taxonomy based on physician statements in hospital encounters: a qualitative study

PubMed Central

Ofstad, Eirik H; Frich, Jan C; Schei, Edvin; Frankel, Richard M; Gulbrandsen, Pål

2016-01-01

Objective The medical literature lacks a comprehensive taxonomy of decisions made by physicians in medical encounters. Such a taxonomy might be useful in understanding the physician-centred, patient-centred and shared decision-making in clinical settings. We aimed to identify and classify all decisions emerging in conversations between patients and physicians. Design Qualitative study of video recorded patient–physician encounters. Participants and setting 380 patients in consultations with 59 physicians from 17 clinical specialties and three different settings (emergency room, ward round, outpatient clinic) in a Norwegian teaching hospital. A randomised sample of 30 encounters from internal medicine was used to identify and classify decisions, a maximum variation sample of 20 encounters was used for reliability assessments, and the remaining encounters were analysed to test for applicability across specialties. Results On the basis of physician statements in our material, we developed a taxonomy of clinical decisions—the Decision Identification and Classification Taxonomy for Use in Medicine (DICTUM). We categorised decisions into 10 mutually exclusive categories: gathering additional information, evaluating test results, defining problem, drug-related, therapeutic procedure-related, legal and insurance-related, contact-related, advice and precaution, treatment goal, and deferment. Four-coder inter-rater reliability using Krippendorff's α was 0.79. Conclusions DICTUM represents a precise, detailed and comprehensive taxonomy of medical decisions communicated within patient–physician encounters. Compared to previous normative frameworks, the taxonomy is descriptive, substantially broader and offers new categories to the variety of clinical decisions. The taxonomy could prove helpful in studies on the quality of medical work, use of time and resources, and understanding of why, when and how patients are or are not involved in decisions. PMID:26868946

Passengers, Crew, Life Support, and Insurance Considerations

NASA Technical Reports Server (NTRS)

ONeil, Daniel A.; Young, Lawrence R.

1999-01-01

This section describes the key issues, barriers, opportunities, and potential trip packages related to the needs and expectations of initial space adventure travelers. A variety of ideas to overcome barriers is presented that address financial, psychological, and sociological problems expected to be encountered in establishing a general PST and tourism business. Tour package descriptions range from near-term surface training facilities to far-term lunar ones. Recommendations include requirements pertaining to human factors in design and needed technology.

DSS 13 Microprocessor Antenna Controller

NASA Technical Reports Server (NTRS)

Gosline, R. M.

1984-01-01

A microprocessor based antenna controller system developed as part of the unattended station project for DSS 13 is described. Both the hardware and software top level designs are presented and the major problems encounted are discussed. Developments useful to related projects include a JPL standard 15 line interface using a single board computer, a general purpose parser, a fast floating point to ASCII conversion technique, and experience gained in using off board floating point processors with the 8080 CPU.

Apollo telescope mount thermal systems unit thermal vacuum test

NASA Technical Reports Server (NTRS)

Trucks, H. F.; Hueter, U.; Wise, J. H.; Bachtel, F. D.

1971-01-01

The Apollo Telescope Mount's thermal systems unit was utilized to conduct a full-scale thermal vacuum test to verify the thermal design and the analytical techniques used to develop the thermal mathematical models. Thermal vacuum test philosophy, test objectives configuration, test monitoring, environment simulation, vehicle test performance, and data correlation are discussed. Emphasis is placed on planning and execution of the thermal vacuum test with particular attention on problems encountered in conducting a test of this maguitude.

Alignment of the Stanford Linear Collider Arcs: Concepts and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitthan, R.; Bell, B.; Friedsam, H.

1987-02-01

The alignment of the Arcs for the Stanford Linear Collider at SLAC has posed problems in accelerator survey and alignment not encountered before. These problems come less from the tight tolerances of 0.1 mm, although reaching such a tight statistically defined accuracy in a controlled manner is difficult enough, but from the absence of a common reference plane for the Arcs. Traditional circular accelerators, including HERA and LEP, have been designed in one plane referenced to local gravity. For the SLC Arcs no such single plane exists. Methods and concepts developed to solve these and other problems, connected with themore » unique design of SLC, range from the first use of satellites for accelerator alignment, use of electronic laser theodolites for placement of components, computer control of the manual adjustment process, complete automation of the data flow incorporating the most advanced concepts of geodesy, strict separation of survey and alignment, to linear principal component analysis for the final statistical smoothing of the mechanical components.« less

Burner balancing Salem Harbor Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sload, A.W.; Dube, R.J.

The traditional method of burner balancing is first to determine the fuel distribution, then to measure the economizer outlet excess oxygen distribution and to adjust the burners accordingly. Fuel distribution is typically measured by clean and dirty air probing. Coal pipe flow can then be adjusted, if necessary, through the use of coal pipe orificing or by other means. Primary air flow must be adjusted to meet the design criteria of the burner. Once coal pipe flow is balanced to within the desired criteria, secondary air flow to individual burners can be changed by adjusting windbox dampers, burner registers, shroudsmore » or other devices in the secondary air stream. This paper discusses problems encountered in measuring excess O{sub 2} at the economizer outlet. It is important to recognize that O{sub 2} measurements at the economizer outlet, by themselves, can be very misleading. If measurement problems are suspected or encountered, an alternate approach similar to that described should be considered. The alternate method is not only useful for burner balancing but also can be used to help in calibrating the plant excess O{sub 2} instruments and provide an on line means of cross-checking excess air measurements. Balanced burners operate closer to their design stoichiometry, providing better NO{sub x} reduction. For Salem Harbor Station, this means a significant saving in urea consumption.« less

Ability of Social Work Students to Determine the Appropriateness of Solutions to Problems Encountered in Social Work Practice.

ERIC Educational Resources Information Center

Sturges, Jack; Yarbrough, Roy D.

The purpose of this study was to determine whether there was an association between the amount of formal social work education completed and ability of students to judge the degree of appropriateness of proposed solutions to problems frequently encountered in social work practice, and secondarily to determine whether students' judgments of problem…

Mothers' Perceptions of Citizenship, Practices for Developing Citizenship Conscience of Their Children and Problems They Encountered

ERIC Educational Resources Information Center

Ersoy, A. Figen

2012-01-01

Family plays an important role in the development of citizenship awareness of children. The purpose of the present study is to figure out the citizenship perceptions of mothers, their practices for developing citizenship conscience of their children and to explore the problems they have encountered. In this study, critical case sampling method has…

Tactics Employed and Problems Encountered by University English Majors in Hong Kong in Using a Dictionary

ERIC Educational Resources Information Center

Chan, Alice Yin Wa

2005-01-01

Building on the results of a small-scale survey which investigated the general use of dictionaries by university English majors in Hong Kong using a questionnaire survey and their specific use of dictionaries using an error correction task, this article discusses the tactics these students employed and the problems they encountered when using a…

An adaptive robust controller for time delay maglev transportation systems

NASA Astrophysics Data System (ADS)

Milani, Reza Hamidi; Zarabadipour, Hassan; Shahnazi, Reza

2012-12-01

For engineering systems, uncertainties and time delays are two important issues that must be considered in control design. Uncertainties are often encountered in various dynamical systems due to modeling errors, measurement noises, linearization and approximations. Time delays have always been among the most difficult problems encountered in process control. In practical applications of feedback control, time delay arises frequently and can severely degrade closed-loop system performance and in some cases, drives the system to instability. Therefore, stability analysis and controller synthesis for uncertain nonlinear time-delay systems are important both in theory and in practice and many analytical techniques have been developed using delay-dependent Lyapunov function. In the past decade the magnetic and levitation (maglev) transportation system as a new system with high functionality has been the focus of numerous studies. However, maglev transportation systems are highly nonlinear and thus designing controller for those are challenging. The main topic of this paper is to design an adaptive robust controller for maglev transportation systems with time-delay, parametric uncertainties and external disturbances. In this paper, an adaptive robust control (ARC) is designed for this purpose. It should be noted that the adaptive gain is derived from Lyapunov-Krasovskii synthesis method, therefore asymptotic stability is guaranteed.

National Transonic Facility model and model support vibration problems

NASA Technical Reports Server (NTRS)

Young, Clarence P., Jr.; Popernack, Thomas G., Jr.; Gloss, Blair B.

1990-01-01

Vibrations of models and model support system were encountered during testing in the National Transonic Facility. Model support system yaw plane vibrations have resulted in model strain gage balance design load limits being reached. These high levels of vibrations resulted in limited aerodynamic testing for several wind tunnel models. The yaw vibration problem was the subject of an intensive experimental and analytical investigation which identified the primary source of the yaw excitation and resulted in attenuation of the yaw oscillations to acceptable levels. This paper presents the principal results of analyses and experimental investigation of the yaw plane vibration problems. Also, an overview of plans for development and installation of a permanent model system dynamic and aeroelastic response measurement and monitoring system for the National Transonic Facility is presented.

Basic research and data analysis for the national geodetic satellite program and for the earth and ocean physics applications program

NASA Technical Reports Server (NTRS)

1974-01-01

Activities related to the National Geodetic Satellite Program are reported and include a discussion of Ohio State University's OSU275 set of tracking station coordinates and transformation parameters, determination of network distortions, and plans for data acquisition and processing. The problems encountered in the development of the LAGEOS satellite are reported in an account of activities related to the Earth and Ocean Physics Applications Program. The LAGEOS problem involves transmission and reception of the laser pulse designed to make accurate determinations of the earth's crustal and rotational motions. Pulse motion, ephemeris, arc range measurements, and accuracy estimates are discussed in view of the problem. Personnel involved in the two programs are also listed, along with travel activities and reports published to date.

Material Compatibility with Space Storable Propellants. Design Guidebook

NASA Technical Reports Server (NTRS)

Uney, P. E.; Fester, D. A.

1972-01-01

An important consideration in the design of spacecraft for interplanetary missions is the compatibility of storage materials with the propellants. Serious problems can arise because many propellants are either extremely reactive or subject to catalytic decomposition, making the selection of proper materials of construction for propellant containment and control a critical requirement for the long-life applications. To aid in selecting materials and designing and evaluating various propulsion subsystems, available information on the compatibility of spacecraft materials with propellants of interest was compiled from literature searches and personal contacts. The compatibility of both metals and nonmetals with hydrazine, monomethyl hydrazine, nitrated hydrazine, and diborance fuels and nitrogen tetroxide, fluorine, oxygen difluoride, and Flox oxidizers was surveyed. These fuels and oxidizers encompass the wide variety of problems encountered in propellant storage. As such, they present worst case situations of the propellant affecting the material and the material affecting the propellant. This includes material attack, propellant decomposition, and the formation of clogging materials.

Recent experience in simultaneous control-structure optimization

NASA Technical Reports Server (NTRS)

Salama, M.; Ramaker, R.; Milman, M.

1989-01-01

To show the feasibility of simultaneous optimization as design procedure, low order problems were used in conjunction with simple control formulations. The numerical results indicate that simultaneous optimization is not only feasible, but also advantageous. Such advantages come at the expense of introducing complexities beyond those encountered in structure optimization alone, or control optimization alone. Examples include: larger design parameter space, optimization may combine continuous and combinatoric variables, and the combined objective function may be nonconvex. Future extensions to include large order problems, more complex objective functions and constraints, and more sophisticated control formulations will require further research to ensure that the additional complexities do not outweigh the advantages of simultaneous optimization. Some areas requiring more efficient tools than currently available include: multiobjective criteria and nonconvex optimization. Efficient techniques to deal with optimization over combinatoric and continuous variables, and with truncation issues for structure and control parameters of both the model space as well as the design space need to be developed.

Analysis of the Problems Encountered in Education of Teachers and Solution Recommendations in Accordance with the Opinions of Faculty of Education Students

ERIC Educational Resources Information Center

Sahan, Gülsün

2016-01-01

The purpose of this study is to put forth the problems encountered in education of teachers and solution recommendations in accordance with the opinions of faculty of education students. Within this framework, the opinions of 182 first grade students from the departments of classroom, social sciences, science and mathematics teaching at Bartin…

Design of a simulation environment for laboratory management by robot organizations

NASA Technical Reports Server (NTRS)

Zeigler, Bernard P.; Cellier, Francois E.; Rozenblit, Jerzy W.

1988-01-01

This paper describes the basic concepts needed for a simulation environment capable of supporting the design of robot organizations for managing chemical, or similar, laboratories on the planned U.S. Space Station. The environment should facilitate a thorough study of the problems to be encountered in assigning the responsibility of managing a non-life-critical, but mission valuable, process to an organized group of robots. In the first phase of the work, we seek to employ the simulation environment to develop robot cognitive systems and strategies for effective multi-robot management of chemical experiments. Later phases will explore human-robot interaction and development of robot autonomy.

Shuttle ku-band communications/radar technical concepts

NASA Technical Reports Server (NTRS)

Griffin, J. W.; Kelley, J. S.; Steiner, A. W.; Vang, H. A.; Zrubek, W. E.; Huth, G. K.

1985-01-01

Technical data on the Shuttle Orbiter K sub u-band communications/radar system are presented. The more challenging aspects of the system design and development are emphasized. The technical problems encountered and the advancements made in solving them are discussed. The radar functions are presented first. Requirements and design/implementation approaches are discussed. Advanced features are explained, including Doppler measurement, frequency diversity, multiple pulse repetition frequencies and pulse widths, and multiple modes. The communications functions that are presented include advances made because of the requirements for multiple communications modes. Spread spectrum, quadrature phase shift keying (QPSK), variable bit rates, and other advanced techniques are discussed. Performance results and conclusions reached are outlined.

Issues Encountered by Physicians During International Travel With Youth National Soccer Teams

PubMed Central

Rosenbaum, Daryl A.; Davis, Stephen W.

2011-01-01

Background: Little information is available to guide the selection, preparation, and support of a traveling team physician. Purpose: To determine the types of injuries and medical problems, as well as general team health and performance issues, encountered by physicians traveling internationally with youth national soccer teams. Study Design: Descriptive epidemiology. Methods: Physicians assigned to travel abroad with the under-17 men’s and women’s US national soccer teams during a 2-year period documented all encounters with team and staff members. Physicians also documented consultations related to team health and performance issues. Results: The 108 cases (5.71 per 10 days) were evenly divided between injuries (n = 54) and noninjuries (n = 54). Players sought care at a higher rate than did staff (2.28 vs 1.09 per 100 person days). Mean severity for all player cases was 5.19 days missed (injuries, 10.48; noninjuries, 0.23). Nearly 69% of injuries involved the lower extremities: strains, sprains, and contusions accounted for 74.1% of injuries. Gastrointestinal, dermatologic, and otolaryngologic complaints accounted for 77.8% of noninjuries. Medications were administered in 71% of cases, with analgesics, cough and cold remedies, antibiotics, and gastrointestinal agents accounting for the majority. The leading team health and performance concerns were nutrition/hydration, conditioning, prevention, and doping control. Conclusion: Physicians traveling internationally with youth soccer teams manage an equal proportion of musculoskeletal and medical problems using simple medications. PMID:23016012

Coal conversion systems design and process modeling. Volume 2: Installation of MPPM on the Signal 9 computer

NASA Technical Reports Server (NTRS)

1981-01-01

Relevant differences between the MPPM resident IBM 370computer and the NASA Sigma 9 computer are described as well as the MPPM system itself and its development. Problems encountered and solutions used to overcome these difficulties during installation of the MPPM system at MSFC are discussed. Remaining work on the installation effort is summarized. The relevant hardware features incorporated in the program are described and their implications on the transportability of the MPPM source code are examined.

MSFC Skylab electrical power systems mission evaluation

NASA Technical Reports Server (NTRS)

Woosley, A. P.

1974-01-01

The design, development, and operation of the Skylab electrical power system are discussed. The electrical systems for the airlock module of the orbital workshop and the Apollo telescope mount are described. Skylab is considered an integral laboratory, however, both cluster and module hardware distinct sections are included. Significant concept and requirement evolution, testing, and modifications resulting from tests are briefly summarized to aid in understanding the launch configuration description and the procedures and performance discussed for in-orbit operation. Specific problems encountered during Skylab orbital missions are analyzed.

Technical problems encountered with the LALA-1 flying laboratory

NASA Technical Reports Server (NTRS)

Swidzinski, J.

1978-01-01

A description is given of structural design changes necessitated by the conversion of the An-2R agricultural support aircraft into a flying test bed to be used in feasibility studies evaluating jet engines in agricultural support aircraft. The entire rear of the fuselage was radically modified to permit mounting of the Al-25 jet engine directly behind the trailing edge of the upper wing. The standard piston engine was retained to permit comparison between the two types of power plants in typical agricultural support operations.

User interface concerns

NASA Technical Reports Server (NTRS)

Redhed, D. D.

1978-01-01

Three possible goals for the Numerical Aerodynamic Simulation Facility (NASF) are: (1) a computational fluid dynamics (as opposed to aerodynamics) algorithm development tool; (2) a specialized research laboratory facility for nearly intractable aerodynamics problems that industry encounters; and (3) a facility for industry to use in its normal aerodynamics design work that requires high computing rates. The central system issue for industry use of such a computer is the quality of the user interface as implemented in some kind of a front end to the vector processor.

Construction of University of Missouri-Rolla’s Full Scale Cloud Simulation Chamber and Applied Research

DTIC Science & Technology

1985-03-01

aluminum outer walls by a matrix of studs screwed into blind holes in the inner wall plates and extending through the outer walls. Thermoelectric cooling...studied. The problem of the uncooled sample ports might have been dealt with, however the failure of several sections of thermoelectric cooling...encountered with the Proto I chamber. It should be kept in mind that the basic cooled wall design consists of thermoelectric cooling modules (TEM’s

A Low Power Cryogenic Shutter Mechanism for use in Infrared Images

NASA Technical Reports Server (NTRS)

Schwinger, D. Scott; Hakun, Claef F.

2000-01-01

This paper discusses the requirements, design, operation, and testing of the shutter mechanism for the Infrared Array Camera (IRAC). The shutter moves a mirror panel into or out of the incoming light path transitioning IRAC between data acquisition and calibration modes. The mechanism features a torsion flexure suspension system, two low-power rotary actuators, a balanced shaft, and a variable reluctance position sensor. Each of these items is discussed along with problems encountered during development and the implemented solutions.

Submillimeter astronomy at the NASA/University of Hawaii 3-meter infrared telescope facility

NASA Technical Reports Server (NTRS)

1983-01-01

Problems encountered in the design of a submillimeter photometer for the infrared telescope facility and some of the solutions already provided are described. Observations of Saturn's rings and the determination of the brightness temperature of Titan, Jupiter, Saturn, Neptune, and Uranus are summarized. Significant findings during solar, galactic, and extragalactic observations include the discovery of low luminosity star formation in the Bok Globule B335 and determination of the far infrared properties of dust in the reflection nebula NGC 7023.

The work of nurses in Australian general practice: A national survey.

PubMed

Joyce, Catherine M; Piterman, Leon

2011-01-01

Following recent reforms to Australia's health system, nurses now comprise a significant and growing sector of the Australian primary care workforce, but there is little data describing the services they provide. This study aimed to describe the patient consultations of nurses in Australian general practice, including patient characteristics, reasons for the consultation, treatments provided and other actions taken. The study was a national cross-sectional survey, with each participating nurse collecting information about 50 nurse-patient encounters. General practice settings in all regions of Australia. 108 nurses volunteered in response to advertisements and 104 returned completed study materials. Participants included Registered (Division 1) and Enrolled (Division 2) nurses working in a general practice setting. Data were collected between May 2007 and May 2008 using a profile questionnaire and a series of encounter forms. Information was gathered on reasons for encounter, patient characteristics, and actions taken. Data were classified using the International Classification of Primary Care. The final data set included 5,253 nurse-patient encounters. 37.2% of patients (95% CI 33.3-41.2) were aged 65 and over, and 57.1% were female (95% CI 54.9-59.5). The majority of encounters (90.7%) were with existing patients of the practice (95% CI 89.1-92.7). The most common reasons for encounter were general and unspecified problems (35.4 per 100 encounters; 95% CI 31.8-39.1), followed by skin-related problems (20.0; 95% CI 17.3-22.8), and cardiovascular problems (11.0; 95% CI 8.7-13.3). Common management actions included medical examinations (20.7 per 100 encounters), immunisations (22.5), diagnostic tests (10.6), and dressings (15.8). Approximately 30% of encounters involved advice-giving. The findings confirm the generalist nature of the General Practice Nurse role, with a wide range of patient types and clinical conditions. There is a clear influence of current funding and organisational arrangements on work patterns, with tasks that have specific funding (including immunisations and wound care) featuring prominently in nurses' work. Whilst nurses' rates for presenting conditions were similar to doctors at a general level, specific actions taken and problems managed differed. New policy reforms in Australia are supporting greater flexibility in the General Practice Nurse role, maximising efficient use of nurses' skills in the primary health care context. Copyright © 2010 Elsevier Ltd. All rights reserved.

Thick section aluminum weldments for SRB structures

NASA Technical Reports Server (NTRS)

Bayless, E.; Sexton, J.

1978-01-01

The Space Shuttle Solid Rocket Booster (SRB) forward and aft skirts were designed with fracture control considerations used in the design data. Fracture control is based on reliance upon nondestructive evaluation (NDE) techniques to detect potentially critical flaws. In the aerospace industry, welds on aluminum in the thicknesses (0.500 to 1.375 in.) such as those encountered on the SRB skirts are normally welded from both sides to minimize distortion. This presents a problem with the potential presence of undefined areas of incomplete fusion and the inability to detect these potential flaws by NDE techniques. To eliminate the possibility of an undetectable defect, weld joint design was revised to eliminate blind root penetrations. Weld parameters and mechanical property data were developed to verify the adequacy of the new joint design.

Integration of a CAD System Into an MDO Framework

NASA Technical Reports Server (NTRS)

Townsend, J. C.; Samareh, J. A.; Weston, R. P.; Zorumski, W. E.

1998-01-01

NASA Langley has developed a heterogeneous distributed computing environment, called the Framework for Inter-disciplinary Design Optimization, or FIDO. Its purpose has been to demonstrate framework technical feasibility and usefulness for optimizing the preliminary design of complex systems and to provide a working environment for testing optimization schemes. Its initial implementation has been for a simplified model of preliminary design of a high-speed civil transport. Upgrades being considered for the FIDO system include a more complete geometry description, required by high-fidelity aerodynamics and structures codes and based on a commercial Computer Aided Design (CAD) system. This report presents the philosophy behind some of the decisions that have shaped the FIDO system and gives a brief case study of the problems and successes encountered in integrating a CAD system into the FEDO framework.

Redundant drive current imbalance problem of the Automatic Radiator Inspection Device (ARID)

NASA Technical Reports Server (NTRS)

Latino, Carl D.

1992-01-01

The Automatic Radiator Inspection Device (ARID) is a 4 Degree of Freedom (DOF) robot with redundant drive motors at each joint. The device is intended to automate the labor intensive task of space shuttle radiator inspection. For safety and redundancy, each joint is driven by two independent motor systems. Motors driving the same joint, however, draw vastly different currents. The concern was that the robot joints could be subjected to undue stress. It was the objective of this summer's project to determine the cause of this current imbalance. In addition it was to determine, in a quantitative manner, what was the cause, how serious the problem was in terms of damage or undue wear to the robot and find solutions if possible. It was concluded that most problems could be resolved with a better motor control design. This document discusses problems encountered and possible solutions.

Survey on effect of surface winds on aircraft design and operation and recommendations for needed wind research

NASA Technical Reports Server (NTRS)

Houbolt, J. C.

1973-01-01

A survey of the effect of environmental surface winds and gusts on aircraft design and operation is presented. A listing of the very large number of problems that are encountered is given. Attention is called to the many studies that have been made on surface winds and gusts, but development in the engineering application of these results to aeronautical problems is pointed out to be still in the embryonic stage. Control of the aircraft is of paramount concern. Mathematical models and their application in simulation studies of airplane operation and control are discussed, and an attempt is made to identify their main gaps or deficiencies. Key reference material is cited. The need for better exchange between the meteorologist and the aeronautical engineer is discussed. Suggestions for improvements in the wind and gust models are made.

Auto-tuning system for NMR probe with LabView

NASA Astrophysics Data System (ADS)

Quen, Carmen; Mateo, Olivia; Bernal, Oscar

2013-03-01

Typical manual NMR-tuning method is not suitable for broadband spectra spanning several megahertz linewidths. Among the main problems encountered during manual tuning are pulse-power reproducibility, baselines, and transmission line reflections, to name a few. We present a design of an auto-tuning system using graphic programming language, LabVIEW, to minimize these problems. The program is designed to analyze the detected power signal of an antenna near the NMR probe and use this analysis to automatically tune the sample coil to match the impedance of the spectrometer (50 Ω). The tuning capacitors of the probe are controlled by a stepper motor through a LabVIEW/computer interface. Our program calculates the area of the power signal as an indicator to control the motor so disconnecting the coil to tune it through a network analyzer is unnecessary. Work supported by NSF-DMR 1105380

Education in the workplace for the physician: clinical management states as an organizing framework.

PubMed

Greenes, R A

2000-01-01

Medical educators are interested in approaches to making selected relevant knowledge available in the context of problem-based care. This is of value both during the process of care and as a means of organizing information for offline self-study. Four trends in health information technology are relevant to achieving the goal and can be expected to play a growing role in the future. First, health care enterprises are developing approaches for access to information resources related to the care of a patient, including clinical data and images but also communication tools, referral and other logistic tools, decision support, and educational materials. Second, information for patients and methods for patient-doctor interaction and decision making are becoming available. Third, computer-based methods for representation of practice guidelines are being developed to support applications that can incorporate their logic. Finally, considering patients as being in particular "clinical management states" (or CMSs) for specific problems, approaches are being developed to use guidelines as a kind of "predictive" framework to enable development of interfaces for problem-based clinical encounters. The guidelines for a CMS can be used to identify the kinds of resources specifically needed for clinical encounters of that type. As the above trends converge to produce problem-specific environments, professional specialty organizations and continuing medical education course designers will need to focus energies on organizing and updating medical knowledge to make it available in CMS-specific contexts.

Child temperament, parent emotions, and perceptions of the child's feeding experience.

PubMed

Hughes, Sheryl O; Shewchuk, Richard M

2012-05-29

Associations between parent and child characteristics and how they influence the approach parents take toward children in the feeding environment have not been examined extensively, especially in low-income minority families who are at a higher risk for obesity. The primary aim of the study was to examine positive and negative parent emotions as potential mediators of the relationship between child temperament and parents' perceptions of strategy effectiveness and problems encountered in feeding children fruit and vegetables. Participants were low-income families (n = 639, 73% minority, children aged 3-5 years) participating in Head Start programs in two states. Parents completed the Children's Behavior Questionnaire (CBQ), Positive and Negative Affect Schedule (PANAS), and measures of strategy effectiveness (teachable moments, practical methods, restriction, and enhanced availability) and problems encountered (vegetable characteristics, child attributions for dislike, external influences, and parental demands) in feeding children fruit and vegetables. Positive parent emotions partially mediated the relationship between child Effortful Control and strategy effectiveness and fully mediated the relationship between Surgency and strategy effectiveness. Although negative parent emotions were associated with increased perception of problems in feeding children fruit and vegetables, the relationship between Negative Affectivity and problems in feeding was partially mediated by negative parent emotions. Positive parent emotions facilitated perceived effectiveness of feeding strategies, with child Effortful Control and Surgency instrumental to this process. Understanding mechanisms in parent-child feeding is important when developing interventions designed to promote healthy child eating behaviors.

Determining problems experienced by student nurses in their work with clinical educators in Turkey.

PubMed

Elcigil, Ayfer; Yildirim Sari, Hatice

2007-07-01

Clinical education is considered an indispensable and vital part of nursing education. Educators have an important role in the successful completion of a student's clinical education. The clinical educator's approach, experience and knowledge have an influence on the students. Students encounter certain problems during their clinical practice under the supervision of educators. This study was conducted to determine the nature of the problems student nurses encounter during clinical training in Turkey. The focus-group interviews were used for this study. Three groups of 8, a total group of 24, composed of students completing their third year were included in the interviews. The students in this study had completed their practical training in the departments of internal medicine, surgery, pediatrics, psychiatry and public health. Among the problems mostly encountered by students, as established by the study, were inadequate assessment by the clinical educator, judgment, negative feedback, communication problems, inadequate guidance and overload. At the end of the research, recommendations were that educators should offer information in the direction of student expectations, increase their positive feedback and lighten the academic workload of these students.

Equipment. [for testing human space perception

NASA Technical Reports Server (NTRS)

1974-01-01

A discussion is presented on the problems encountered in designing and constructing a simulator to determine human vestibular response to a range of linear accelerations from 0 to 0.3 g's. Starting with a set of initial performance specifications, the designers combined an array of commercially available components into a system which, altough requiring further refinement before completion, shows considerable promise of fulfilling the initial requirements. The resulting system consists of a wheeled vehicle driven by a cable and drum arrangement, powered by a hydraulic-electric servo-valve. Technical design considerations are presented along with a discussion of the trade-offs between various component options. A description of the system characteristics as well as an analysis of preliminary test results and recommendations for future system improvements are included.

Tiltrotor Research Aircraft composite blade repairs - Lessons learned

NASA Technical Reports Server (NTRS)

Espinosa, Paul S.; Groepler, David R.

1992-01-01

The XV-15, N703NA Tiltrotor Research Aircraft located at the NASA Ames Research Center, Moffett Field, California, currently uses a set of composite rotor blades of complex shape known as the advanced technology blades (ATBs). The main structural element of the blades is a D-spar constructed of unidirectional, angled fiberglass/graphite, with the aft fairing portion of the blades constructed of a fiberglass cross-ply skin bonded to a Nomex honeycomb core. The blade tip is a removable laminate shell that fits over the outboard section of the spar structure, which contains a cavity to retain balance weights. Two types of tip shells are used for research. One is highly twisted (more than a conventional helicopter blade) and has a hollow core constructed of a thin Nomex-honeycomb-and-fiberglass-skin sandwich; the other is untwisted with a solid Nomex honeycomb core and a fiberglass cross-ply skin. During initial flight testing of the blades, a number of problems in the composite structure were encountered. These problems included debonding between the fiberglass skin and the honeycomb core, failure of the honeycomb core, failures in fiberglass splices, cracks in fiberglass blocks, misalignment of mated composite parts, and failures of retention of metal fasteners. Substantial time was spent in identifying and repairing these problems. Discussed here are the types of problems encountered, the inspection procedures used to identify each problem, the repairs performed on the damaged or flawed areas, the level of criticality of the problems, and the monitoring of repaired areas. It is hoped that this discussion will help designers, analysts, and experimenters in the future as the use of composites becomes more prevalent.

Tiltrotor research aircraft composite blade repairs: Lessons learned

NASA Technical Reports Server (NTRS)

Espinosa, Paul S.; Groepler, David R.

1991-01-01

The XV-15, N703NA Tiltrotor Research Aircraft located at the NASA Ames Research Center, Moffett Field, California, currently uses a set of composite rotor blades of complex shape known as the advanced technology blades (ATBs). The main structural element of the blades is a D-spar constructed of unidirectional, angled fiberglass/graphite, with the aft fairing portion of the blades constructed of a fiberglass cross-ply skin bonded to a Nomex honeycomb core. The blade tip is a removable laminate shell that fits over the outboard section of the spar structure, which contains a cavity to retain balance weights. Two types of tip shells are used for research. One is highly twisted (more than a conventional helicopter blade) and has a hollow core constructed of a thin Nomex-honeycomb-and-fiberglass-skin sandwich; the other is untwisted with a solid Nomex honeycomb core and a fiberglass cross-ply skin. During initial flight testing of the blades, a number of problems in the composite structure were encountered. These problems included debonding between the fiberglass skin and the honeycomb core, failure of the honeycomb core, failures in fiberglass splices, cracks in fiberglass blocks, misalignment of mated composite parts, and failures of retention of metal fasteners. Substantial time was spent in identifying and repairing these problems. Discussed here are the types of problems encountered, the inspection procedures used to identify each problem, the repairs performed on the damaged or flawed areas, the level of criticality of the problems, and the monitoring of repaired areas. It is hoped that this discussion will help designers, analysts, and experimenters in the future as the use of composites becomes more prevalent.

Annealed Importance Sampling Reversible Jump MCMC algorithms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karagiannis, Georgios; Andrieu, Christophe

2013-03-20

It will soon be 20 years since reversible jump Markov chain Monte Carlo (RJ-MCMC) algorithms have been proposed. They have significantly extended the scope of Markov chain Monte Carlo simulation methods, offering the promise to be able to routinely tackle transdimensional sampling problems, as encountered in Bayesian model selection problems for example, in a principled and flexible fashion. Their practical efficient implementation, however, still remains a challenge. A particular difficulty encountered in practice is in the choice of the dimension matching variables (both their nature and their distribution) and the reversible transformations which allow one to define the one-to-one mappingsmore » underpinning the design of these algorithms. Indeed, even seemingly sensible choices can lead to algorithms with very poor performance. The focus of this paper is the development and performance evaluation of a method, annealed importance sampling RJ-MCMC (aisRJ), which addresses this problem by mitigating the sensitivity of RJ-MCMC algorithms to the aforementioned poor design. As we shall see the algorithm can be understood as being an “exact approximation” of an idealized MCMC algorithm that would sample from the model probabilities directly in a model selection set-up. Such an idealized algorithm may have good theoretical convergence properties, but typically cannot be implemented, and our algorithms can approximate the performance of such idealized algorithms to an arbitrary degree while not introducing any bias for any degree of approximation. Our approach combines the dimension matching ideas of RJ-MCMC with annealed importance sampling and its Markov chain Monte Carlo implementation. We illustrate the performance of the algorithm with numerical simulations which indicate that, although the approach may at first appear computationally involved, it is in fact competitive.« less

The Library and Human Memory. Final Report on Mechanized Information Services in the University Library, Phase I - Planning. Part 13.

ERIC Educational Resources Information Center

Norman, Donald A.

This paper discusses the differences between the storage problems encountered in a large library and those encountered in the human memory. Some of the properties of the human memory system and some of the major issues which affect the interaction between human users and the existing library systems are outlined. The problem of browsing is used as…

Outcomes of planetary close encounters - A systematic comparison of methodologies

NASA Technical Reports Server (NTRS)

Greenberg, Richard; Carusi, Andrea; Valsecchi, G. B.

1988-01-01

Several methods for estimating the outcomes of close planetary encounters are compared on the basis of the numerical integration of a range of encounter types. An attempt is made to lay the foundation for the development of predictive rules concerning the encounter outcomes applicable to the refinement of the statistical mechanics that apply to planet-formation and similar problems concerning planetary swarms. Attention is given to Oepik's (1976) formulation of the two-body approximation, whose predicted motion differs from the correct three-body behavior.

Increased Diels-Alderase activity through backbone remodeling guided by Foldit players.

PubMed

Eiben, Christopher B; Siegel, Justin B; Bale, Jacob B; Cooper, Seth; Khatib, Firas; Shen, Betty W; Players, Foldit; Stoddard, Barry L; Popovic, Zoran; Baker, David

2012-01-22

Computational enzyme design holds promise for the production of renewable fuels, drugs and chemicals. De novo enzyme design has generated catalysts for several reactions, but with lower catalytic efficiencies than naturally occurring enzymes. Here we report the use of game-driven crowdsourcing to enhance the activity of a computationally designed enzyme through the functional remodeling of its structure. Players of the online game Foldit were challenged to remodel the backbone of a computationally designed bimolecular Diels-Alderase to enable additional interactions with substrates. Several iterations of design and characterization generated a 24-residue helix-turn-helix motif, including a 13-residue insertion, that increased enzyme activity >18-fold. X-ray crystallography showed that the large insertion adopts a helix-turn-helix structure positioned as in the Foldit model. These results demonstrate that human creativity can extend beyond the macroscopic challenges encountered in everyday life to molecular-scale design problems.

Computer Aided Instruction (CAI) for the Shipboard Nontactical ADP Program (SNAP). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, L.D.; Hammons, C.E.; Hume, R.

Oak Ridge National Laboratory is developing a prototype computer aided instruction package for the Navy Management Systems Support Office. This report discusses the background of the project and the progress to date including a description of the software design, problems encountered, solutions found, and recommendations. The objective of this project is to provide a prototype that will enhance training and can be used as a shipboard refresher and retraining tool. The prototype system will be installed onboard ships where Navy personnel will have ready access to the training. The subsequent testing and evaluation of the prototype could provide the basismore » for a Navy-wide effort to implement computer aided instruction. The work to date has followed a rigorous structured analysis methodology based on the Yourdon/DeMarco techniques. A set of data flow diagrams and a data dictionary are included in the appendices. The problems encountered revolve around requirements to use existing hardware, software, and programmer capabilities for development, implementation, and maintenance of the instructional software. Solutions have been developed which will allow the software to exist in the given environment and still provide advanced features not available in commercial courses.« less

[Physician-patient with AIDS-relationship, as a model of clinical relation within the framework of the social security institutions in Mexico].

PubMed

Valdez-Martínez, Edith; Bedolla, Miguel; Rico, Rosalía

2011-01-01

To examine the nature and level of physician involvement during a clinical encounter with a patient with a chronic condition, such as AIDS, and to explore how it is understood and constructed by them. Qualitative design with participant observation and semi-structured interviews, with physicians and patients, conducted in hospitals of Social Security Institutions in Mexico City Data were analyzed using the constant comparative method developed in the grounded theory tradition. The emergent themes studied were the dynamics of the encounters, levels of participation of the physician, and attitudes of both participants. Irrespective of whether patients were seen for the first time, or subsequently, in outpatient consultation or in hospital, the physician focused on the solution of the biological problem and on the performance of a work commitment with the Institution. This study highlights the need to strengthen the incorporation of the ethics into daily clinical practice in order to transform a physician-patient relationship which is merely bureaucratic, focused on the solution of a biological problem and on the fulfillment of an institutional commitment, into a relationship which is truly professional and at the service of the patient.

An investigation into the feasibility of locating portable medical devices using radio frequency identification devices and technology.

PubMed

Britton, J

2007-01-01

Portable medical devices represent an important resource for assisting healthcare delivery. The movement of portable devices often results in them being unavailable when needed. Tracking equipment using radiofrequency identification technology/devices (RFID) may provide a promising solution to the problems encountered in locating portable equipment. An RFID technology trial was undertaken at Royal Alexandra Hospital, Paisley. This involved the temporary installation of three active readers and attaching actively transmitting radio frequency tags to different portable medical devices. The active readers and computer system were linked using a bespoke data network. Tags and readers from two separate manufacturers were tested. Reliability difficulties were encountered when testing the technology from the first manufacturer, probably due to the casing of the medical device interfering with the signal from the tag. Improved results were obtained when using equipment from the second manufacturer with an overall error rate of 12.3%. Tags from this manufacturer were specifically designed to overcome problems observed with the first system tested. Findings from this proof of concept trial suggest that RFID technology could be used to track the location of equipment in a hospital.

Composite overwrapped metallic tanks

NASA Technical Reports Server (NTRS)

Caudill, C. L.; Kirlin, R. L.

1972-01-01

Work is reported for fabricating and testing the fiberglass overwrapped titanium pressure vessel for cryogenic service. Difficulties encountered in the tank liner fabrication phase involved explosive forming, vacuum annealing, chemical milling and electron beam welding. While each of these processes and the nondestructive test methods employed are normally considered to be individually reliable, the combination of poor material together with fabrication and development reversals prevented the full achievement of the desired end results. Eight tanks plus a prototype and tool proofing article were produced. Six of the vessels failed during the hydrostatic sizing operation. One of the remaining tanks was hydrostatically pressurized to burst and the other was pressurized repeatedly at 75 F from 100 psi to the operating pressure until failure occurred. As a result, it is not possible to draw firm conclusions as to the true value of the design concept due to the problems encountered in the program.

Complications of bariatric surgery: presentation and emergency management--a review.

PubMed

Monkhouse, S J W; Morgan, J D T; Norton, S A

2009-05-01

The prevalence of obesity surgery is increasing rapidly in the UK as demand rises. Consequently, general surgeons on-call may be faced with the complications of such surgery and need to have an understanding about how to manage them, at least initially. Obesity surgery is mainly offered in tertiary centres but patients may present with problems to their local district hospital. This review summarises the main complications that may be encountered. A full literature search was carried out looking at articles published in the last 10 years. Keywords for search purposes included bariatric, surgery, complications, emergency and management. Complications of bariatric surgery have been extensively written about but never in a format that is designed to aid the on-call surgeon. The intricate details and rare complications have been excluded to concentrate on those symptoms and signs that are likely to be encountered by the emergency team.

Optical navigation during the Voyager Neptune encounter

NASA Technical Reports Server (NTRS)

Riedel, J. E.; Owen, W. M., Jr.; Stuve, J. A.; Synnott, S. P.; Vaughan, R. M.

1990-01-01

Optical navigation techniques were required to successfully complete the planetary exploration phase of the NASA deep-space Voyager mission. The last of Voyager's planetary encounters, with Neptune, posed unique problems from an optical navigation standpoint. In this paper we briefly review general aspects of the optical navigation process as practiced during the Voyager mission, and discuss in detail particular features of the Neptune encounter which affected optical navigation. New approaches to the centerfinding problem were developed for both stars and extended bodies, and these are described. Results of the optical navigation data analysis are presented, as well as a description of the optical orbit determination system and results of its use during encounter. Partially as a result of the optical navigation processing, results of scientific significance were obtained. These results include the discovery and orbit determination of several new satellites of Neptune and the determination of the size of Triton, Neptune's largest moon.

Computational 3D structures of drug-targeting proteins in the 2009-H1N1 influenza A virus

NASA Astrophysics Data System (ADS)

Du, Qi-Shi; Wang, Shu-Qing; Huang, Ri-Bo; Chou, Kuo-Chen

2010-01-01

The neuraminidase (NA) and M2 proton channel of influenza virus are the drug-targeting proteins, based on which several drugs were developed. However these once powerful drugs encountered drug-resistant problem to the H5N1 and H1N1 flu. To address this problem, the computational 3D structures of NA and M2 proteins of 2009-H1N1 influenza virus were built using the molecular modeling technique and computational chemistry method. Based on the models the structure features of NA and M2 proteins were analyzed, the docking structures of drug-protein complexes were computed, and the residue mutations were annotated. The results may help to solve the drug-resistant problem and stimulate designing more effective drugs against 2009-H1N1 influenza pandemic.

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

A multi-period distribution network design model under demand uncertainty

NASA Astrophysics Data System (ADS)

Tabrizi, Babak H.; Razmi, Jafar

2013-05-01

Supply chain management is taken into account as an inseparable component in satisfying customers' requirements. This paper deals with the distribution network design (DND) problem which is a critical issue in achieving supply chain accomplishments. A capable DND can guarantee the success of the entire network performance. However, there are many factors that can cause fluctuations in input data determining market treatment, with respect to short-term planning, on the one hand. On the other hand, network performance may be threatened by the changes that take place within practicing periods, with respect to long-term planning. Thus, in order to bring both kinds of changes under control, we considered a new multi-period, multi-commodity, multi-source DND problem in circumstances where the network encounters uncertain demands. The fuzzy logic is applied here as an efficient tool for controlling the potential customers' demand risk. The defuzzifying framework leads the practitioners and decision-makers to interact with the solution procedure continuously. The fuzzy model is then validated by a sensitivity analysis test, and a typical problem is solved in order to illustrate the implementation steps. Finally, the formulation is tested by some different-sized problems to show its total performance.

Rocket Engine Oscillation Diagnostics

NASA Technical Reports Server (NTRS)

Nesman, Tom; Turner, James E. (Technical Monitor)

2002-01-01

Rocket engine oscillating data can reveal many physical phenomena ranging from unsteady flow and acoustics to rotordynamics and structural dynamics. Because of this, engine diagnostics based on oscillation data should employ both signal analysis and physical modeling. This paper describes an approach to rocket engine oscillation diagnostics, types of problems encountered, and example problems solved. Determination of design guidelines and environments (or loads) from oscillating phenomena is required during initial stages of rocket engine design, while the additional tasks of health monitoring, incipient failure detection, and anomaly diagnostics occur during engine development and operation. Oscillations in rocket engines are typically related to flow driven acoustics, flow excited structures, or rotational forces. Additional sources of oscillatory energy are combustion and cavitation. Included in the example problems is a sampling of signal analysis tools employed in diagnostics. The rocket engine hardware includes combustion devices, valves, turbopumps, and ducts. Simple models of an oscillating fluid system or structure can be constructed to estimate pertinent dynamic parameters governing the unsteady behavior of engine systems or components. In the example problems it is shown that simple physical modeling when combined with signal analysis can be successfully employed to diagnose complex rocket engine oscillatory phenomena.

The laser interferometer skin-friction meter - A numerical and experimental study

NASA Technical Reports Server (NTRS)

Murphy, J. D.; Westphal, R. V.

1986-01-01

Limits to the applicability of thin-film lubrication theory are established. The following two problems are considered: (1) the response of the oil film to a time-varying skin friction such as is encountered in turbulent boundary layers, and (2) a 'surface-wave instability' encountered at high skin-friction levels. Results corresponding to the first problem reveal that the laser interferometer skin-friction meter may, in principle, be applied to the measurement of instantaneous skin friction. In addressing the second problem, it is shown that the observed surface waves are not the result of a hydrodynamic instability.

Physical activity problem-solving inventory for adolescents: Development and initial validation

USDA-ARS?s Scientific Manuscript database

Youth encounter physical activity barriers, often called problems. The purpose of problem-solving is to generate solutions to overcome the barriers. Enhancing problem-solving ability may enable youth to be more physically active. Therefore, a method for reliably assessing physical activity problem-s...

Apollo experience report: Launch escape propulsion subsystem

NASA Technical Reports Server (NTRS)

Townsend, N. A.

1973-01-01

The Apollo launch escape propulsion subsystem contained three solid rocket motors. The general design, development, and qualification of the solid-propellant pitch-control, tower-jettison, and launch-escape motors of the Apollo launch escape propulsion subsystem were completed during years 1961 to 1966. The launch escape system components are described in general terms, and the sequence of events through the ground-based test programs and flight-test programs is discussed. The initial ground rules established for this system were that it should use existing technology and designs as much as possible. The practicality of this decision is proved by the minimum number of problems that were encountered during the development and qualification program.

A Review of the Anaerobic Digestion of Fruit and Vegetable Waste.

PubMed

Ji, Chao; Kong, Chui-Xue; Mei, Zi-Li; Li, Jiang

2017-11-01

Fruit and vegetable waste is an ever-growing global question. Anaerobic digestion techniques have been developed that facilitate turning such waste into possible sources for energy and fertilizer, simultaneously helping to reduce environmental pollution. However, various problems are encountered in applying these techniques. The purpose of this study is to review local and overseas studies, which focus on the use of anaerobic digestion to dispose fruit and vegetable wastes, discuss the acidification problems and solutions in applying anaerobic digestion for fruit and vegetable wastes and investigate the reactor design (comparing single phase with two phase) and the thermal pre-treatment for processing raw wastes. Furthermore, it analyses the dominant microorganisms involved at different stages of digestion and suggests a focus for future studies.

Some problems of the calculation of three-dimensional boundary layer flows on general configurations

NASA Technical Reports Server (NTRS)

Cebeci, T.; Kaups, K.; Mosinskis, G. J.; Rehn, J. A.

1973-01-01

An accurate solution of the three-dimensional boundary layer equations over general configurations such as those encountered in aircraft and space shuttle design requires a very efficient, fast, and accurate numerical method with suitable turbulence models for the Reynolds stresses. The efficiency, speed, and accuracy of a three-dimensional numerical method together with the turbulence models for the Reynolds stresses are examined. The numerical method is the implicit two-point finite difference approach (Box Method) developed by Keller and applied to the boundary layer equations by Keller and Cebeci. In addition, a study of some of the problems that may arise in the solution of these equations for three-dimensional boundary layer flows over general configurations.

Integration of PGD-virtual charts into an engineering design process

NASA Astrophysics Data System (ADS)

Courard, Amaury; Néron, David; Ladevèze, Pierre; Ballere, Ludovic

2016-04-01

This article deals with the efficient construction of approximations of fields and quantities of interest used in geometric optimisation of complex shapes that can be encountered in engineering structures. The strategy, which is developed herein, is based on the construction of virtual charts that allow, once computed offline, to optimise the structure for a negligible online CPU cost. These virtual charts can be used as a powerful numerical decision support tool during the design of industrial structures. They are built using the proper generalized decomposition (PGD) that offers a very convenient framework to solve parametrised problems. In this paper, particular attention has been paid to the integration of the procedure into a genuine engineering design process. In particular, a dedicated methodology is proposed to interface the PGD approach with commercial software.

Parallax-free exophthalmometry: a comprehensive review of the literature on clinical exophthalmometry and the introduction of the first parallax-free exophthalmometer.

PubMed

Genders, Stijn W; Mourits, Daphne L; Jasem, Mohammad; Kloos, Roel J H M; Saeed, Peerooz; Mourits, Maarten Ph

2015-02-01

To present the first parallax-free exophthalmometer design. Exophthalmometry is an important clinical tool. We provide a historic overview of clinical exophthalmometer designs, and we review current problems encountered in exophthalmometry. We present a new and parallax-free exophthalmometer design that we have evaluated in 49 patients visiting our orbital clinic. The mean age of the patients was 49.8 years and 72% were female. The Pearson interobserver variation was 0.97, and 94% of the Hertel values measured by the two observers were within the limits (1.6 mm) of agreement. This meter appears to be a reliable instrument for exophthalmometry. It is the first instrument that allows for a complete parallax-free measurement.

Using an instrumented manikin for Space Station Freedom analysis

NASA Technical Reports Server (NTRS)

Orr, Linda; Hill, Richard

1989-01-01

One of the most intriguing and complex areas of current computer graphics research is animating human figures to behave in a realistic manner. Believable, accurate human models are desirable for many everyday uses including industrial and architectural design, medical applications, and human factors evaluations. For zero-gravity (0-g) spacecraft design and mission planning scenarios, they are particularly valuable since 0-g conditions are difficult to simulate in a one-gravity Earth environment. At NASA/JSC, an in-house human modeling package called PLAID is currently being used to produce animations for human factors evaluation of Space Station Freedom design issues. Presented here is an introductory background discussion of problems encountered in existing techniques for animating human models and how an instrumented manikin can help improve the realism of these models.

A cryogenic scan mechanism for use in Fourier transform spectrometers

NASA Technical Reports Server (NTRS)

Hakun, Claef F.; Blumenstock, Kenneth A.

1995-01-01

This paper describes the requirements, design, assembly and testing of the linear Scan Mechanism (SM) of the Composite Infrared Spectrometer (CIRS) Instrument. The mechanism consists of an over constrained flexible structure, an innovative moving magnet actuator, passive eddy current dampers, a Differential Eddy Current (DEC) sensor, Optical Limit Sensors (OLS), and a launch lock. Although all the components of the mechanism are discussed, the flexible structure and the magnetic components are the primary focus. Several problems encountered and solutions implemented during the development of the scan mechanism are also described.

Free Wake Techniques for Rotor Aerodynamic Analysis. Volume 1: Summary of Results and Background Theory

NASA Technical Reports Server (NTRS)

Miller, R. H.

1982-01-01

Results obtained during the development of a consistent aerodynamic theory for rotors in hovering flight are discussed. Methods of aerodynamic analysis were developed which are adequate for general design purposes until such time as more elaborate solutions become available, in particular solutions which include real fluids effects. Several problems were encountered in the course of this development, and many remain to be solved, however it is felt that a better understanding of the aerodynamic phenomena involved was obtained. Remaining uncertainties are discussed.

Quality planning in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

The purpose of this paper is to investigate deeper on the factors that contribute to the effectiveness of quality planning, identifying the common problems encountered in quality planning, practices and ways for improvements in quality planning for construction projects. This paper involves data collected from construction company representatives across Malaysia that are obtained through semi-structured interviews as well as questionnaire distributions. Results shows that design of experiments (average index: 4.61), inspection (average index: 4.45) and quality audit as well as other methods (average index: 4.26) rank first, second and third most important factors respectively.

Systems engineering and integration of control centers in support of multiple programs. [ground control for STS payloads and unmanned vehicles

NASA Technical Reports Server (NTRS)

Miller, David N.

1989-01-01

The NASA Johnson Space Center's new Multiprogram Control Center (MPCC) addresses the control requirements of complex STS payloads as well as unmanned vehicles. An account is given of the relationship of the MPCC to the STS Mission Control Center, with a view to significant difficulties that may be encountered and solutions thus far devised for generic problems. Examples of MPCC workstation applications encompass telemetry decommutation, engineering unit conversion, data-base management, trajectory processing, and flight design.

Hot air drum evaporator. [Patent application

DOEpatents

Black, R.L.

1980-11-12

An evaporation system for aqueous radioactive waste uses standard 30 and 55 gallon drums. Waste solutions form cascading water sprays as they pass over a number of trays arranged in a vertical stack within a drum. Hot dry air is circulated radially of the drum through the water sprays thereby removing water vapor. The system is encased in concrete to prevent exposure to radioactivity. The use of standard 30 and 55 gallon drums permits an inexpensive compact modular design that is readily disposable, thus eliminating maintenance and radiation build-up problems encountered with conventional evaporation systems.

Hot air drum evaporator

DOEpatents

Black, Roger L.

1981-01-01

An evaporation system for aqueous radioactive waste uses standard 30 and 55 gallon drums. Waste solutions form cascading water sprays as they pass over a number of trays arranged in a vertical stack within a drum. Hot dry air is circulated radially of the drum through the water sprays thereby removing water vapor. The system is encased in concrete to prevent exposure to radioactivity. The use of standard 30 and 55 gallon drums permits an inexpensive compact modular design that is readily disposable, thus eliminating maintenance and radiation build-up problems encountered with conventional evaporation systems.

Distributed software framework and continuous integration in hydroinformatics systems

NASA Astrophysics Data System (ADS)

Zhou, Jianzhong; Zhang, Wei; Xie, Mengfei; Lu, Chengwei; Chen, Xiao

2017-08-01

When encountering multiple and complicated models, multisource structured and unstructured data, complex requirements analysis, the platform design and integration of hydroinformatics systems become a challenge. To properly solve these problems, we describe a distributed software framework and it’s continuous integration process in hydroinformatics systems. This distributed framework mainly consists of server cluster for models, distributed database, GIS (Geographic Information System) servers, master node and clients. Based on it, a GIS - based decision support system for joint regulating of water quantity and water quality of group lakes in Wuhan China is established.

Structural interaction with transportation and handling systems

NASA Technical Reports Server (NTRS)

1973-01-01

Problems involved in the handling and transportation of finished space vehicles from the factory to the launch site are presented, in addition to recommendations for properly accounting for in space vehicle structural design, adverse interactions during transportation. Emphasis is given to the protection of vehicle structures against those environments and loads encountered during transportation (including temporary storage) which would exceed the levels that the vehicle can safely withstand. Current practices for verifying vehicle safety are appraised, and some of the capabilities and limitations of transportation and handling systems are summarized.

AOIPS water resources data management system

NASA Technical Reports Server (NTRS)

Vanwie, P.

1977-01-01

The text and computer-generated displays used to demonstrate the AOIPS (Atmospheric and Oceanographic Information Processing System) water resources data management system are investigated. The system was developed to assist hydrologists in analyzing the physical processes occurring in watersheds. It was designed to alleviate some of the problems encountered while investigating the complex interrelationships of variables such as land-cover type, topography, precipitation, snow melt, surface runoff, evapotranspiration, and streamflow rates. The system has an interactive image processing capability and a color video display to display results as they are obtained.

Correlation between patients' reasons for encounters/health problems and population density in Japan: a systematic review of observational studies coded by the International Classification of Health Problems in Primary Care (ICHPPC) and the International Classification of Primary care (ICPC).

PubMed

Kaneko, Makoto; Ohta, Ryuichi; Nago, Naoki; Fukushi, Motoharu; Matsushima, Masato

2017-09-13

The Japanese health care system has yet to establish structured training for primary care physicians; therefore, physicians who received an internal medicine based training program continue to play a principal role in the primary care setting. To promote the development of a more efficient primary health care system, the assessment of its current status in regard to the spectrum of patients' reasons for encounters (RFEs) and health problems is an important step. Recognizing the proportions of patients' RFEs and health problems, which are not generally covered by an internist, can provide valuable information to promote the development of a primary care physician-centered system. We conducted a systematic review in which we searched six databases (PubMed, the Cochrane Library, Google Scholar, Ichushi-Web, JDreamIII and CiNii) for observational studies in Japan coded by International Classification of Health Problems in Primary Care (ICHPPC) and International Classification of Primary Care (ICPC) up to March 2015. We employed population density as index of accessibility. We calculated Spearman's rank correlation coefficient to examine the correlation between the proportion of "non-internal medicine-related" RFEs and health problems in each study area in consideration of the population density. We found 17 studies with diverse designs and settings. Among these studies, "non-internal medicine-related" RFEs, which was not thought to be covered by internists, ranged from about 4% to 40%. In addition, "non-internal medicine-related" health problems ranged from about 10% to 40%. However, no significant correlation was found between population density and the proportion of "non-internal medicine-related" RFEs and health problems. This is the first systematic review on RFEs and health problems coded by ICHPPC and ICPC undertaken to reveal the diversity of health problems in Japanese primary care. These results suggest that primary care physicians in some rural areas of Japan need to be able to deal with "non-internal-medicine-related" RFEs and health problems, and that curriculum including practical non-internal medicine-related training is likely to be important.

Educating the humanitarian engineer.

PubMed

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Sex of the GP--20 years on.

PubMed

Harrison, Christopher M; Britt, Helena C; Charles, Janice

2011-08-15

Previous research with the Australian Morbidity and Treatment Survey (1990-1991) showed significant differences in general practitioner characteristics and patient mix of male and female GPs. Even after adjusting for these, it was seen that male and female GPs managed different types of medical conditions. The proportion of female GPs increased from 19.6% in 1990-1991 to 37.1% in 2009-2010. This study investigates whether differences remain two decades later. Analysis of 2009-2010 Bettering the Evaluation and Care of Health (BEACH) data examining GP characteristics, patient encounter characteristics, patient reasons for encounter (RFE), problem types managed and management methods used, by GP sex. Whether GP sex was an independent predictor of problem types being managed, or management methods used, was tested using multiple logistic regressions and Poisson regression. 988 GPs recorded 98 800 GP-patient encounters. Adjusted differences in clinical activity of male and female GPs. After adjustment, compared with male GPs, females recorded more RFEs about general and unspecified issues and endocrine, female genital, pregnancy and family planning problems; and fewer concerning the musculoskeletal, respiratory, skin and male genital systems. Female GPs managed more general and unspecified, digestive, circulatory, psychological, endocrine, female genital and social problems; recorded nearly 20% more clinical treatments and referrals; recorded nearly 10% more imaging and pathology tests; and 4.3% fewer medications. After two decades, even with increased numbers of female GPs, the differences in problems managed by male and female GPs remain, and will probably continue. Female GPs use more resources per encounter, but may not use more resources in terms of annual patient care.

The National Long Term Care Demonstration: operational issues encountered in developing the research design.

PubMed

Carcagno, G J; Kemper, P

1983-01-01

This paper describes the design of the National Long Term Care Demonstration and its evaluation and discusses a number of operational issues encountered in the design process: simultaneous design of research and operations, identification of the target population, randomization, collection of comparable data, development of an assessment instrument, potential changes in existing programs, and termination planning.

Multiple regression for physiological data analysis: the problem of multicollinearity.

PubMed

Slinker, B K; Glantz, S A

1985-07-01

Multiple linear regression, in which several predictor variables are related to a response variable, is a powerful statistical tool for gaining quantitative insight into complex in vivo physiological systems. For these insights to be correct, all predictor variables must be uncorrelated. However, in many physiological experiments the predictor variables cannot be precisely controlled and thus change in parallel (i.e., they are highly correlated). There is a redundancy of information about the response, a situation called multicollinearity, that leads to numerical problems in estimating the parameters in regression equations; the parameters are often of incorrect magnitude or sign or have large standard errors. Although multicollinearity can be avoided with good experimental design, not all interesting physiological questions can be studied without encountering multicollinearity. In these cases various ad hoc procedures have been proposed to mitigate multicollinearity. Although many of these procedures are controversial, they can be helpful in applying multiple linear regression to some physiological problems.

Engineering the System and Technical Integration

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

Approximately 80% of the problems encountered in aerospace systems have been due to a breakdown in technical integration and/or systems engineering. One of the major challenges we face in designing, building, and operating space systems is: how is adequate integration achieved for the systems various functions, parts, and infrastructure? This Contractor Report (CR) deals with part of the problem of how we engineer the total system in order to achieve the best balanced design. We will discuss a key aspect of this question - the principle of Technical Integration and its components, along with management and decision making. The CR will first provide an introduction with a discussion of the Challenges in Space System Design and meeting the challenges. Next is an overview of Engineering the System including Technical Integration. Engineering the System is expanded to include key aspects of the Design Process, Lifecycle Considerations, etc. The basic information and figures used in this CR were presented in a NASA training program for Program and Project Managers Development (PPMD) in classes at Georgia Tech and at Marshall Space Flight Center (MSFC). Many of the principles and illustrations are extracted from the courses we teach for MSFC.

The misnomer of attention-deficit hyperactivity disorder.

PubMed

Wasserman, Theodore; Wasserman, Lori Drucker

2015-01-01

We propose that attention-deficit disorder represents an inefficiency of an integrated system designed to allocate working memory to designated tasks rather than the absence or dysfunction of a particular form of attention. A significant portion of this inefficiency in the allocation of working memory represents poor engagement of the reward circuit with distinct circuits of learning and performance that control instrumental conditioning (learning). Efficient attention requires the interaction of these circuits. For a significant percentage of individuals who present with attention-deficit disorder, their problems represent the engagement, or lack thereof, of the motivational and reward circuit as opposed to problems, or disorders of attention traditionally defined as problems with orienting, focusing, and sustaining. We demonstrate that there is an integrated system of working-memory allocation that responds by recruiting relevant aspects of both cortex and subcortex to the demands of the task being encountered. In this model, attention is viewed as a gating function determined by novelty, flight-or-fight response, and reward history/valence affecting motivation. We view the traditional models of attention, rather than describe specific types of attention per se, as representing the description of the behavioral output of this integrated orienting and engagement system designed to allocate working memory to task-specific stimuli.

Wireless sensing and vibration control with increased redundancy and robustness design.

PubMed

Li, Peng; Li, Luyu; Song, Gangbing; Yu, Yan

2014-11-01

Control systems with long distance sensor and actuator wiring have the problem of high system cost and increased sensor noise. Wireless sensor network (WSN)-based control systems are an alternative solution involving lower setup and maintenance costs and reduced sensor noise. However, WSN-based control systems also encounter problems such as possible data loss, irregular sampling periods (due to the uncertainty of the wireless channel), and the possibility of sensor breakdown (due to the increased complexity of the overall control system). In this paper, a wireless microcontroller-based control system is designed and implemented to wirelessly perform vibration control. The wireless microcontroller-based system is quite different from regular control systems due to its limited speed and computational power. Hardware, software, and control algorithm design are described in detail to demonstrate this prototype. Model and system state compensation is used in the wireless control system to solve the problems of data loss and sensor breakdown. A positive position feedback controller is used as the control law for the task of active vibration suppression. Both wired and wireless controllers are implemented. The results show that the WSN-based control system can be successfully used to suppress the vibration and produces resilient results in the presence of sensor failure.

Synthesis from Design Requirements of a Hybrid System for Transport Aircraft Longitudinal Control. Volume 1

NASA Technical Reports Server (NTRS)

Hynes, Charles S.; Hardy, Gordon H.; Sherry, Lance

2007-01-01

Volume I of this report presents a new method for synthesizing hybrid systems directly from design requirements, and applies the method to design of a hybrid system for longitudinal control of transport aircraft. The resulting system satisfies general requirement for safety and effectiveness specified a priori, enabling formal validation to be achieved. Volume II contains seven appendices intended to make the report accessible to readers with backgrounds in human factors, fli ght dynamics and control. and formal logic. Major design goals are (1) system desi g n integrity based on proof of correctness at the design level, (2), significant simplification and cost reduction in system development and certification, and (3) improved operational efficiency, with significant alleviation of human-factors problems encountered by pilots in current transport aircraft. This report provides for the first time a firm technical basis for criteria governing design and certification of avionic systems for transport aircraft. It should be of primary interest to designers of next-generation avionic systems.

Synthesis from Design Requirements of a Hybrid System for Transport Aircraft Longitudinal Control. Volume 2

NASA Technical Reports Server (NTRS)

Hynes, Charles S.; Hardy, Gordon H.; Sherry, Lance

2007-01-01

Volume I of this report presents a new method for synthesizing hybrid systems directly from desi gn requirements, and applies the method to design of a hybrid system for longitudinal control of transport aircraft. The resulting system satisfies general requirement for safety and effectiveness specified a priori, enabling formal validation to be achieved. Volume II contains seven appendices intended to make the report accessible to readers with backgrounds in human factors, flight dynamics and control, and formal logic. Major design goals are (1) system design integrity based on proof of correctness at the design level, (2) significant simplification and cost reduction in system development and certification, and (3) improved operational efficiency, with significant alleviation of human-factors problems encountered by pilots in current transport aircraft. This report provides for the first time a firm technical basis for criteria governing design and certification of avionic systems for transport aircraft. It should be of primary interest to designers of next-generation avionic systems.

Measuring the Process and Quality of Informed Consent for Clinical Research: Development and Testing

PubMed Central

Cohn, Elizabeth Gross; Jia, Haomiao; Smith, Winifred Chapman; Erwin, Katherine; Larson, Elaine L.

2013-01-01

Purpose/Objectives To develop and assess the reliability and validity of an observational instrument, the Process and Quality of Informed Consent (P-QIC). Design A pilot study of the psychometrics of a tool designed to measure the quality and process of the informed consent encounter in clinical research. The study used professionally filmed, simulated consent encounters designed to vary in process and quality. Setting A major urban teaching hospital in the northeastern region of the United States. Sample 63 students enrolled in health-related programs participated in psychometric testing, 16 students participated in test-retest reliability, and 5 investigator-participant dyads were observed for the actual consent encounters. Methods For reliability and validity testing, students watched and rated videotaped simulations of four consent encounters intentionally varied in process and content and rated them with the proposed instrument. Test-retest reliability was established by raters watching the videotaped simulations twice. Inter-rater reliability was demonstrated by two simultaneous but independent raters observing an actual consent encounter. Main Research Variables The essential elements of information and communication for informed consent. Findings The initial testing of the P-QIC demonstrated reliable and valid psychometric properties in both the simulated standardized consent encounters and actual consent encounters in the hospital setting. Conclusions The P-QIC is an easy-to-use observational tool that provides a quick assessment of the areas of strength and areas that need improvement in a consent encounter. It can be used in the initial trainings of new investigators or consent administrators and in ongoing programs of improvement for informed consent. Implications for Nursing The development of a validated observational instrument will allow investigators to assess the consent process more accurately and evaluate strategies designed to improve it. PMID:21708532

Further Studies of the Response of Single Rotor Helicopters to Vortex Encounters

DOT National Transportation Integrated Search

1985-09-01

This report is a continuation of the studies described in Reference where a simplified approach to the problem of predicting the uncontrolled response of a single rotor helicopter to an encounter with the wing tip vortex of a large transport aircraft...

Energy Problems and Environmental Concern

ERIC Educational Resources Information Center

Train, Russell E.

1973-01-01

Discusses problems encountered in energy extraction and consumption, involving nuclear power plant construction, environmental consequences of energy systems, and energy conservation ethics. Indicates that the increasing concern over environmental quality is not the true cause of present energy problems. (CC)

HFL-10 lifting body flight control system characteristics and operational experience

NASA Technical Reports Server (NTRS)

Painter, W. D.; Sitterle, G. J.

1974-01-01

A flight evaluation was made of the mechanical hydraulic flight control system and the electrohydraulic stability augmentation system installed in the HL-10 lifting body research vehicle. Flight tests performed in the speed range from landing to a Mach number of 1.86 and the altitude range from 697 meters (2300 feet) to 27,550 meters (90,300 feet) were supplemented by ground tests to identify and correct structural resonance and limit-cycle problems. Severe limit-cycle and control sensitivity problems were encountered during the first flight. Stability augmentation system structural resonance electronic filters were modified to correct the limit-cycle problem. Several changes were made to control stick gearing to solve the control sensitivity problem. Satisfactory controllability was achieved by using a nonlinear system. A limit-cycle problem due to hydraulic fluid contamination was encountered during the first powered flight, but the problem did not recur after preflight operations were improved.

Ambulatory EHR functionality: a comparison of functionality lists.

PubMed

Drury, Barbara M

2006-01-01

There is a proliferation of lists intended to define and clarify the functionality of an ambulatory electronic health record system. These lists come from both private and public entities and vary in terminology, granularity, usability, and comprehensiveness. For example, functionality regarding a problem list includes the following possible definitions: * "Create and maintain patient-specific problem lists," from the HL7 Electronic Health Record Draft Standard for Trial Use. * "Provide a flexible mechanism for retrieval of encounter information that can be organized by diagnosis, problem, problem type," from the Bureau of Primary Health Care. * "The system shall associate encounters, orders, medications and notes with one or more problems," from the Certification Commission on Health Information Technology. * "Displays dates of problems on problem list," from COPIC Insurance Co. * "Shall automatically close acute problems using an automated algorithm," from the Physicians Foundations HIT Subcommittee. This article will compare the attributes of these five electronic health record functionality lists and their usefulness to different audiences-clinicians, application developers and payers.

Making a Back-Illuminated Imager with Back-Side Contact and Alignment Markers

NASA Technical Reports Server (NTRS)

Pain, Bedabrata

2008-01-01

A design modification and a fabrication process that implements the modification have been conceived to solve two problems encountered in the development of back-illuminated, back-sidethinned complementary metal oxide/ semiconductor (CMOS) image-detector integrated circuits. The two problems are (1) how to form metal electrical-contact pads on the back side that are electrically connected through the thickness in proper alignment with electrical contact points on the front side and (2) how to provide alignment keys on the back side to ensure proper registration of backside optical components (e.g., microlenses and/or color filters) with the front-side pixel pattern. The essence of the design modification is to add metal plugs that extend from the desired front-side locations through the thickness and protrude from the back side of the substrate. The plugs afford the required front-to-back electrical conduction, and the protrusions of the plugs serve as both the alignment keys and the bases upon which the back-side electrical-contact pads can be formed.

Turbine blade and vane heat flux sensor development, phase 1

NASA Technical Reports Server (NTRS)

Atkinson, W. H.; Cyr, M. A.; Strange, R. R.

1984-01-01

Heat flux sensors available for installation in the hot section airfoils of advanced aircraft gas turbine engines were developed. Two heat flux sensors were designed, fabricated, calibrated, and tested. Measurement techniques are compared in an atmospheric pressure combustor rig test. Sensors, embedded thermocouple and the Gordon gauge, were fabricated that met the geometric and fabricability requirements and could withstand the hot section environmental conditions. Calibration data indicate that these sensors yielded repeatable results and have the potential to meet the accuracy goal of measuring local heat flux to within 5%. Thermal cycle tests and thermal soak tests indicated that the sensors are capable of surviving extended periods of exposure to the environment conditions in the turbine. Problems in calibration of the sensors caused by severe non-one dimensional heat flow were encountered. Modifications to the calibration techniques are needed to minimize this problem and proof testing of the sensors in an engine is needed to verify the designs.

Turbine blade and vane heat flux sensor development, phase 1

NASA Astrophysics Data System (ADS)

Atkinson, W. H.; Cyr, M. A.; Strange, R. R.

1984-08-01

Heat flux sensors available for installation in the hot section airfoils of advanced aircraft gas turbine engines were developed. Two heat flux sensors were designed, fabricated, calibrated, and tested. Measurement techniques are compared in an atmospheric pressure combustor rig test. Sensors, embedded thermocouple and the Gordon gauge, were fabricated that met the geometric and fabricability requirements and could withstand the hot section environmental conditions. Calibration data indicate that these sensors yielded repeatable results and have the potential to meet the accuracy goal of measuring local heat flux to within 5%. Thermal cycle tests and thermal soak tests indicated that the sensors are capable of surviving extended periods of exposure to the environment conditions in the turbine. Problems in calibration of the sensors caused by severe non-one dimensional heat flow were encountered. Modifications to the calibration techniques are needed to minimize this problem and proof testing of the sensors in an engine is needed to verify the designs.

Development and validation of a low-cost mobile robotics testbed

NASA Astrophysics Data System (ADS)

Johnson, Michael; Hayes, Martin J.

2012-03-01

This paper considers the design, construction and validation of a low-cost experimental robotic testbed, which allows for the localisation and tracking of multiple robotic agents in real time. The testbed system is suitable for research and education in a range of different mobile robotic applications, for validating theoretical as well as practical research work in the field of digital control, mobile robotics, graphical programming and video tracking systems. It provides a reconfigurable floor space for mobile robotic agents to operate within, while tracking the position of multiple agents in real-time using the overhead vision system. The overall system provides a highly cost-effective solution to the topical problem of providing students with practical robotics experience within severe budget constraints. Several problems encountered in the design and development of the mobile robotic testbed and associated tracking system, such as radial lens distortion and the selection of robot identifier templates are clearly addressed. The testbed performance is quantified and several experiments involving LEGO Mindstorm NXT and Merlin System MiaBot robots are discussed.

Cancellation control law for lateral-directional dynamics of a supermaneuverable aircraft

NASA Technical Reports Server (NTRS)

Snell, Antony

1993-01-01

Cancellation control laws are designed which reduce the high levels of lateral acceleration encountered during aggressive rolling maneuvers executed at high angle of attack. Two independent problem are examined. One is to reduce lateral acceleration at the mass center, while the other focuses on lateral acceleration at the pilot's station, located 7.0 m forward of the mass center. Both of these problems are challenging and somewhat different in their limitations. In each case the design is based on a linearization of the lateral-directional dynamics about a high angle of attack condition. The controllers incorporate dynamic inversion inner loops to provide control of stability-axis roll- and yaw-rates and then employ cancellation filters in both feed-forward and feed-back signal paths. The relative simplicity of the control laws should allow nonlinear generalizations to be devised. Although it is shown that lateral acceleration can be reduced substantially by such control laws, this is at the cost of slowed roll response, poor dutch-roll damping or a combination of the two.

Ergonomic problems encountered by the surgical team during video endoscopic surgery.

PubMed

Kaya, Oskay I; Moran, Munevver; Ozkardes, Alper B; Taskin, Emre Y; Seker, Gaye E; Ozmen, Mahir M

2008-02-01

The aim of this study is to analyze the problems related to the ergonomic conditions faced by video endoscopic surgical teams during video endoscopic surgery by means of a questionnaire. A questionnaire was distributed to 100 medical personnel, from 8 different disciplines, who performed video endoscopic surgeries. Participants were asked to answer 13 questions related to physical, perceptive, and cognitive problems. Eighty-two questionnaires were returned. Although there were differences among the disciplines, participants assessment of various problems ranged from 32% to 72% owing to poor ergonomic conditions. As the problems encountered by the staff during video endoscopic surgery and the poor ergonomic conditions of the operating room affect the productivity of the surgical team and the safety and efficiency of the surgery, redesigning of the instruments and the operating room is required.

Orthopaedic Problems of the Mentally Retarded

ERIC Educational Resources Information Center

McSweeney, Anthony

1972-01-01

Problems encountered by orthopedic surgeons treating the mentally retarded are identified, and cooperation among pediatricians, psychiatrists, psychologists, social workers, physiotherapists, occupational therapists, and orthopedic surgeons is recommended. (GW)

Methodological Problems Encountered in the Review of Research in Science Teaching

ERIC Educational Resources Information Center

Lawlor, E. P.; Lawlor, F. X.

1972-01-01

Describes the difficulties encountered in selecting material to be included in the reviews of science education research in the Curtis Series'' published by the Columbia Teachers' College Press. Presents evidence outlining the weaknesses of using a jury'' to determine so-called superior research. (AL)

Developing Multiplicative Thinking from Additive Reasoning

ERIC Educational Resources Information Center

Tobias, Jennifer M.; Andreasen, Janet B.

2013-01-01

As students progress through elementary school, they encounter mathematics concepts that shift from additive to multiplicative situations (NCTM 2000). When they encounter fraction problems that require multiplicative thinking, they tend to incorrectly extend additive properties from whole numbers (Post et al. 1985). As a result, topics such as …

Clue Insensitivity in Remote Associates Test Problem Solving

ERIC Educational Resources Information Center

Smith, Steven M.; Sifonis, Cynthia M.; Angello, Genna

2012-01-01

Does spreading activation from incidentally encountered hints cause incubation effects? We used Remote Associates Test (RAT) problems to examine effects of incidental clues on impasse resolution. When solution words were seen incidentally 3-sec before initially unsolved problems were retested, more problems were resolved (Experiment 1). When…

CPR Drilling.

ERIC Educational Resources Information Center

Kittleson, Mark

1980-01-01

Problems encountered by cardiopulmonary resuscitation (CPR) instructors are discussed and some possible solutions to these problems are suggested. Management techniques for effective use of class size, time, and instructional materials are described. (JN)

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

29 CFR 1926.1436 - Derricks.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and guying must be designed to withstand maximum horizontal and vertical forces encountered when... be designed to withstand maximum horizontal and vertical forces encountered when operating within...”). (D) Applicable terms in section 7-0.2 (“Definitions”). (ii) Load tests for new hoists. The employer...

Space shuttle electrical power generation and reactant supply system

NASA Technical Reports Server (NTRS)

Simon, W. E.

1985-01-01

The design philosophy and development experience of fuel cell power generation and cryogenic reactant supply systems are reviewed, beginning with the state of technology at the conclusion of the Apollo Program. Technology advancements span a period of 10 years from initial definition phase to the most recent space transportation system (STS) flights. The development program encompassed prototype, verification, and qualification hardware, as well as post-STS-1 design improvements. Focus is on the problems encountered, the scientific and engineering approaches employed to meet the technological challenges, and the results obtained. Major technology barriers are discussed, and the evolving technology development paths are traced from their conceptual beginnings to the fully man-rated systems which are now an integral part of the shuttle vehicle.

Low cost solar array project 1: Silicon material

NASA Technical Reports Server (NTRS)

Jewett, D. N.; Bates, H. E.; Hill, D. M.

1980-01-01

The low cost production of silicon by deposition of silicon from a hydrogen/chlorosilane mixture is described. Reactor design, reaction vessel support systems (physical support, power control and heaters, and temperature monitoring systems) and operation of the system are reviewed. Testing of four silicon deposition reactors is described, and test data and consequently derived data are given. An 18% conversion of trichlorosilane to silicon was achieved, but average conversion rates were lower than predicted due to incomplete removal of byproduct gases for recycling and silicon oxide/silicon polymer plugging of the gas outlet. Increasing the number of baffles inside the reaction vessel improved the conversion rate. Plans for further design and process improvements to correct the problems encountered are outlined.

Recent experience with multidisciplinary analysis and optimization in advanced aircraft design

NASA Technical Reports Server (NTRS)

Dollyhigh, Samuel M.; Sobieszczanski-Sobieski, Jaroslaw

1990-01-01

The task of modern aircraft design has always been complicated due to the number of intertwined technical factors from the various engineering disciplines. Furthermore, this complexity has been rapidly increasing by the development of such technologies as aeroelasticity tailored materials and structures, active control systems, integrated propulsion/airframe controls, thrust vectoring, and so on. Successful designs that achieve maximum advantage from these new technologies require a thorough understanding of the physical phenomena and the interactions among these phenomena. A study commissioned by the Aeronautical Sciences and Evaluation Board of the National Research Council has gone so far as to identify technology integration as a new discipline from which many future aeronautical advancements will arise. Regardless of whether one considers integration as a new discipline or not, it is clear to all engineers involved in aircraft design and analysis that better methods are required. In the past, designers conducted parametric studies in which a relatively small number of principal characteristics were varied to determine the effect on design requirements which were themselves often diverse and contradictory. Once a design was chosen, it then passed through the various engineers' disciplines whose principal task was to make the chosen design workable. Working in a limited design space, the discipline expert sometimes improved the concept, but more often than not, the result was in the form of a penalty to make the original concept workable. If an insurmountable problem was encountered, the process began over. Most design systems that attempt to account for disciplinary interactions have large empirical elements and reliance on past experience is a poor guide in obtaining maximum utilizations of new technologies. Further compounding the difficulty of design is that as the aeronautical sciences have matured, the discipline specialist's area of research has generally narrowed as more sophisticated methods are developed in the specialist's area of expertise. The results have been a decrease in the awareness of the impact of his decisions on other disciplines. This paper will outline the progress and problems encountered in the analysis, design, optimization sensitivity analysis, mathematical modeling, and configurations control and the means by which they are being solved. The breadth versus depth dilemma in analysis and design and the means for coping with that dilemma will be discussed. Finally, the all-important human aspects and the need for a new 'culture ' for doing business in an integrated, multidisciplinary design environment are discussed.

Benefits of treatment theory in the design of explanatory trials: cognitive treatment of illness perception in chronic low back pain rehabilitation as an illustrative example.

PubMed

Siemonsma, Petra C; Schröder, Carin D; Roorda, Leo D; Lettinga, Ant T

2010-02-01

Evidence-based treatment is not effective for all patients. Research must therefore be carried out to help clinicians to decide for whom and under what circumstances certain treatment is effective. Treatment theory can assist in designing research that will provide results on which clinical decision-making can be based. To illustrate how treatment theory can be helpful in the design of explanatory trials that assist clinical decision-making. The benefit of treatment theory was demonstrated by approaching the design of a clinical trial from two perspectives: one without the use of treatment theory and one with the explicit use of treatment theory. Evaluation of the effectiveness of cognitive treatment of illness perceptions for patients with chronic low back pain was used as an illustrative example. With treatment theory as the main focus, the intervention became the starting point for the design of an explanatory trial. Potentially relevant patient selection criteria, essential treatment components, the optimal choice of a control group and the selection of outcome measures were specified. This paper not only describes problems encountered in research on the effectiveness of treatment, but also ways in which to address these problems.

Estimating the encounter rate variance in distance sampling

USGS Publications Warehouse

Fewster, R.M.; Buckland, S.T.; Burnham, K.P.; Borchers, D.L.; Jupp, P.E.; Laake, J.L.; Thomas, L.

2009-01-01

The dominant source of variance in line transect sampling is usually the encounter rate variance. Systematic survey designs are often used to reduce the true variability among different realizations of the design, but estimating the variance is difficult and estimators typically approximate the variance by treating the design as a simple random sample of lines. We explore the properties of different encounter rate variance estimators under random and systematic designs. We show that a design-based variance estimator improves upon the model-based estimator of Buckland et al. (2001, Introduction to Distance Sampling. Oxford: Oxford University Press, p. 79) when transects are positioned at random. However, if populations exhibit strong spatial trends, both estimators can have substantial positive bias under systematic designs. We show that poststratification is effective in reducing this bias. ?? 2008, The International Biometric Society.

Vapor compression distillation module

NASA Technical Reports Server (NTRS)

Nuccio, P. P.

1975-01-01

A Vapor Compression Distillation (VCD) module was developed and evaluated as part of a Space Station Prototype (SSP) environmental control and life support system. The VCD module includes the waste tankage, pumps, post-treatment cells, automatic controls and fault detection instrumentation. Development problems were encountered with two components: the liquid pumps, and the waste tank and quantity gauge. Peristaltic pumps were selected instead of gear pumps, and a sub-program of materials and design optimization was undertaken leading to a projected life greater than 10,000 hours of continuous operation. A bladder tank was designed and built to contain the waste liquids and deliver it to the processor. A detrimental pressure pattern imposed upon the bladder by a force-operated quantity gauge was corrected by rearranging the force application, and design goals were achieved. System testing has demonstrated that all performance goals have been fulfilled.

Software design for automated assembly of truss structures

NASA Technical Reports Server (NTRS)

Herstrom, Catherine L.; Grantham, Carolyn; Allen, Cheryl L.; Doggett, William R.; Will, Ralph W.

1992-01-01

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

Impact of Hospital Information Systems on Emergency Patient Processing

PubMed Central

Rusnak, James E.

1981-01-01

The Emergency Department offers the Hospital Information System's designer some unique problems to solve in the operational areas of patient registration, order entry, charge recording, and treatment processing. In a number of instances, Hospital Information Systems implementers have encountered serious difficulties in trying to design system components to support the requirements of the Emergency Services Department's operations. Washington Hospital has developed a very effective system for Emergency Services. The system's features are designed to meet the special requirements of the department and to maximize the use of the data captured by the Hospital Information System. The system supports accurate and timely charging for services. The treatment of the patient has been dramatically improved through the use of a computerized order processing and control. The installed systems resulted in a higher quality of care and cost effective operations.

Context sensitivity and ambiguity in component-based systems design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bespalko, S.J.; Sindt, A.

1997-10-01

Designers of components-based, real-time systems need to guarantee to correctness of soft-ware and its output. Complexity of a system, and thus the propensity for error, is best characterized by the number of states a component can encounter. In many cases, large numbers of states arise where the processing is highly dependent on context. In these cases, states are often missed, leading to errors. The following are proposals for compactly specifying system states which allow the factoring of complex components into a control module and a semantic processing module. Further, the need for methods that allow for the explicit representation ofmore » ambiguity and uncertainty in the design of components is discussed. Presented herein are examples of real-world problems which are highly context-sensitive or are inherently ambiguous.« less

Flight Experience from Space Photovoltaic Concentrator Arrays and its Implication on Terrestrial Concentrator Systems

NASA Technical Reports Server (NTRS)

Piszczor, Michael F., Jr.

2003-01-01

Nearly all photovoltaic solar arrays flown in space have used a planar (non- concentrating) design. However, there have been a few notable exceptions where photovoltaic concentrators have been tested and used as the mission s primary power source. Among these are the success experienced by the SCARLET (Solar Concentrator Array with Refractive Linear Element Technology) concept used to power NASA's Deep Space 1 mission and the problems encountered by the original Boeing 702 reflective trough concentrator design. This presentation will give a brief overview of past photovoltaic concentrator systems that have flown in space, specifically addressing the valuable lessons learned from flight experience, and other viable concentrator concepts that are being proposed for the future. The general trends of this flight experience will be noted and discussed with regard to its implications on terrestrial photovoltaic concentrator designs.

Time Trends in the Family Physician Management of Insomnia: The Australian Experience (2000-2015).

PubMed

Miller, Christopher B; Valenti, Lisa; Harrison, Christopher M; Bartlett, Delwyn J; Glozier, Nick; Cross, Nathan E; Grunstein, Ronald R; Britt, Helena C; Marshall, Nathaniel S

2017-06-15

To evaluate changes in rates of family physician (FP) management of insomnia in Australia from 2000-2015. The Bettering the Evaluation And Care of Health (BEACH) program is a nationally representative cross-sectional survey of 1,000 newly randomly sampled family physicians' activity in Australia per year, who each record details of 100 consecutive patient encounters. This provided records of approximately 100,000 encounters each year. We identified all encounters with patients older than 15 years where insomnia or difficulty sleeping was managed and assessed trends in these encounters from 2000-2015. There was no change in the management rate of insomnia from 2000-2007 (1.54 per 100 encounters [95% confidence interval [CI]: 1.49-1.58]). This rate was lower from 2008-2015 (1.31 per 100 encounters [95% CI: 1.27-1.35]). There was no change in FP management: pharmacotherapy was used in approximately 90% of encounters; nonpharmacological advice was given at approximately 20%; and onward referral at approximately 1% of encounters. Prescription of temazepam changed from 54.6 [95% CI: 51.4-57.9] per 100 insomnia problems in 2000-2001 to 43.6 [95% CI: 40.1-47.0] in 2014-2015, whereas zolpidem increased steadily from introduction in 2000 to 14.6 [95% CI: 12.2-17.1] per 100 insomnia problems in 2006-2007, and then decreased to 7.3 [95% CI: 5.4-9.2] by 2014-2015. Insomnia management frequency decreased after 2007 in conjunction with ecologically associated Australian media reporting of adverse effects linked to zolpidem use. Australian FPs remain reliant on pharmacotherapy for the management of insomnia. © 2017 American Academy of Sleep Medicine

Challenges Encountered by 17 Autistic Young Adults in Hong Kong

ERIC Educational Resources Information Center

Wong, Shui-wai

2017-01-01

The self-portrayals of 17 young persons with autism spectrum disorder reveal the challenges encountered by them, including study problems, inter-personal relationships, being bullied by classmates at school, discrimination by the public in general and teachers, social workers, and peers in particular, obstacles to post-secondary education,…

Value of Family and Group Counseling Models where Grandparents Function as Parents to Their Grandchildren

ERIC Educational Resources Information Center

Edwards, Oliver W.; Ray, Shannon L.

2010-01-01

Those involved in circumstances in which children are raised by their grandparents often encounter serious problems that require assistance from counselors. Research suggests that grandparents and parents in these families typically experience heightened stress and psychosocial distress. Additionally, the children often encounter behavioral,…

Israeli Adolescents and Military Service: Encounters.

ERIC Educational Resources Information Center

Levy, Amihay; And Others

1987-01-01

Asserts that inadequate attention has been paid to the problems of the young soldier entering army life in Israel. Delineates some areas of friction and vulnerability between the worlds of the youth and the military. Describes the systematization of these encounters into groups, creating the "Binary Model," which helps in locating and…

Assessing the role of memory in preschoolers' performance on episodic foresight tasks.

PubMed

Atance, Cristina M; Sommerville, Jessica A

2014-01-01

A total of 48 preschoolers (ages 3, 4, and 5) received four tasks modelled after prior work designed to assess the development of "episodic foresight". For each task, children encountered a problem in one room and, after a brief delay, were given the opportunity in a second room to select an item to solve the problem. Importantly, after selecting an item, children were queried about their memory for the problem. Age-related changes were found both in children's ability to select the correct item and their ability to remember the problem. However, when we controlled for children's memory for the problem, there were no longer significant age-related changes on the item choice measure. These findings suggest that age-related changes in children's performance on these tasks are driven by improvements in children's memory versus improvements in children's future-oriented thinking or "foresight" per se. Our results have important implications for how best to structure tasks to measure children's episodic foresight, and also for the relative role of memory in this task and in episodic foresight more broadly.

"What constitutes a 'problem'?" Producing 'alcohol problems' through online counselling encounters.

PubMed

Savic, Michael; Ferguson, Nyssa; Manning, Victoria; Bathish, Ramez; Lubman, Dan I

2017-08-01

Typically, health policy, practice and research views alcohol and other drug (AOD) 'problems' as objective things waiting to be detected, diagnosed and treated. However, this approach to policy development and treatment downplays the role of clinical practices, tools, discourses, and systems in shaping how AOD use is constituted as a 'problem'. For instance, people might present to AOD treatment with multiple psycho-social concerns, but usually only a singular AOD-associated 'problem' is considered serviceable. As the assumed nature of 'the serviceable problem' influences what treatment responses people receive, and how they may come to be enacted as 'addicted' or 'normal' subjects, it is important to subject clinical practices of problem formulation to critical analysis. Given that the reach of AOD treatment has expanded via the online medium, in this article we examine how 'problems' are produced in online alcohol counselling encounters involving people aged 55 and over. Drawing on poststructural approaches to problematisation, we not only trace how and what 'problems' are produced, but also what effects these give rise to. We discuss three approaches to problem formulation: (1) Addiction discourses at work; (2) Moving between concerns and alcohol 'problems'; (3) Making 'problems' complex and multiple. On the basis of this analysis, we argue that online AOD counselling does not just respond to pre-existing 'AOD problems'. Rather, through the social and clinical practices of formulation at work in clinical encounters, online counselling also produces them. Thus, given a different set of circumstances, practices and relations, 'problems' might be defined or emerge differently-perhaps not as 'problems' at all or perhaps as different kinds of concerns. We conclude by highlighting the need for a critical reflexivity in AOD treatment and policy in order to open up possibilities for different ways of engaging with, and responding to, people's needs in their complexity. Copyright © 2017 Elsevier B.V. All rights reserved.

Strategy Keys as Tools for Problem Solving

ERIC Educational Resources Information Center

Herold-Blasius, Raja

2017-01-01

Problem solving is one of the main competences we seek to teach students at school for use in their future lives. However, when dealing with mathematical problems, teachers encounter a wide variety of difficulties. To foster students' problem-solving skills, the authors developed "strategy keys." Strategy keys can serve as material to…

Laboratory errors and patient safety.

PubMed

Miligy, Dawlat A

2015-01-01

Laboratory data are extensively used in medical practice; consequently, laboratory errors have a tremendous impact on patient safety. Therefore, programs designed to identify and reduce laboratory errors, as well as, setting specific strategies are required to minimize these errors and improve patient safety. The purpose of this paper is to identify part of the commonly encountered laboratory errors throughout our practice in laboratory work, their hazards on patient health care and some measures and recommendations to minimize or to eliminate these errors. Recording the encountered laboratory errors during May 2008 and their statistical evaluation (using simple percent distribution) have been done in the department of laboratory of one of the private hospitals in Egypt. Errors have been classified according to the laboratory phases and according to their implication on patient health. Data obtained out of 1,600 testing procedure revealed that the total number of encountered errors is 14 tests (0.87 percent of total testing procedures). Most of the encountered errors lay in the pre- and post-analytic phases of testing cycle (representing 35.7 and 50 percent, respectively, of total errors). While the number of test errors encountered in the analytic phase represented only 14.3 percent of total errors. About 85.7 percent of total errors were of non-significant implication on patients health being detected before test reports have been submitted to the patients. On the other hand, the number of test errors that have been already submitted to patients and reach the physician represented 14.3 percent of total errors. Only 7.1 percent of the errors could have an impact on patient diagnosis. The findings of this study were concomitant with those published from the USA and other countries. This proves that laboratory problems are universal and need general standardization and bench marking measures. Original being the first data published from Arabic countries that evaluated the encountered laboratory errors and launch the great need for universal standardization and bench marking measures to control the laboratory work.

Conducting longitudinal, process-oriented research with conflict-affected youth: Solving the inevitable challenges.

PubMed

Dubow, Eric F; Aber, J Lawrence; Betancourt, Theresa S; Cummings, E Mark; Huesmann, L Rowell

2017-02-01

The reader might get the impression that the four projects described in this Special Section proceeded in a systematic and predictable way. Of course, those of us engaged in each research project encountered pitfalls and challenges along the way. A main goal of this Special Section is to provide pathways and encouragement for those who may be interested in advancing high-quality research on this topic. In this paper, we describe a set of practical and ethical challenges that we encountered in conducting our longitudinal, process-oriented, and translational research with conflict-affected youth, and we illustrate how problems can be solved with the goal of maintaining the internal and external validity of the research designs. We are hopeful that by describing the challenges of our work, and how we overcame them, which are seldom treated in this or any other literature on research on child development in high-risk contexts, we can offer a realistic and encouraging picture of conducting methodologically sound research in conflict-affected contexts.

Development of a banding database for North Pacific albatross: Implications for future data collection

USGS Publications Warehouse

Doherty, P.F.; Kendall, W.L.; Sillett, S.; Gustafson, M.; Flint, B.; Naughton, M.; Robbins, C.S.; Pyle, P.; Macintyre, Ian G.

2006-01-01

The effects of fishery practices on black-footed (Phoebastria nigripes) and Laysan albatross (Phoebastria immutabilis) continue to be a source of contention and uncertainty. Some of this uncertainty is a result of a lack of estimates of albatross demographic parameters such as survival. To begin to address these informational needs, a database of albatross banding and encounter records was constructed. Due to uncertainty concerning data collection and validity of assumptions required for mark-recapture analyses, these data should be used with caution. Although demographic parameter estimates are of interest to many, band loss rates, temporary emigration rates, and discontinuous banding effort can confound these estimates. We suggest a number of improvements in data collection that can help ameliorate problems, including the use of double banding and collecting data using a `robust? design. Additionally, sustained banding and encounter efforts are needed to maximize the value of these data. With these modifications, the usefulness of the banding data could be improved markedly.

Teaching adolescents with learning disabilities to generate and use task-specific strategies.

PubMed

Ellis, E S; Deshler, D D; Schumaker, J B

1989-02-01

The effects of an intervention designed to enhance students' roles as control agents for strategic functioning were investigated. The goal was to increase the ability of students labeled learning disabled to generate new strategies or adapt existing task-specific strategies for meeting varying demands of the regular classroom. Measures were taken in three areas: (a) metacognitive knowledge related to generating or adapting strategies, (b) ability to generate problem-solving strategies for novel problems, and (c) the effects of the intervention on students' regular classroom grades and teachers' perceptions of the students' self-reliance and work quality. A multiple baseline across subjects design was used. The intervention resulted in dramatic increases in the subjects' verbal expression of metacognitive knowledge and ability to generate task-specific strategies. Students' regular class grades increased; for those students who did not spontaneously generalize use of the strategy to problems encountered in these classes, providing instruction to target specific classes resulted in improved grades. Teacher perceptions of students' self-reliance and work quality did not change, probably because baseline measures were already high in both areas. Implications for instruction and future research are discussed.

Exploring functions of the lost seeking devices for people with dementia.

PubMed

Chen, Yung-Ching; Leung, Cherng-Yee

2012-01-01

This paper utilized a user-centered design approach as the foundation for technology in dementia care in order to improve the quality of telemedicine service. A status-quo analysis and questionnaire survey were conducted to explore the actual needs of the elders in using the lost seeking devices and the problems they encountered. In total, 37 caregivers for people with dementia were surveyed (20 female, 17 male, M = 50.08, SD = 15.47). The dementia-patients: 16 are male, 21 female (M = 72.75, SD = 10.23). Through analysis and induction, 3 problems were identified: poor information transmission, low user acceptance, individual material security anxiety. 2-4 improvement proposals are suggested for each problem. Most care-givers hope technological products would increase the efficiency and safety, but they also think it's too expensive and lack of computer skills. This result demonstrates the choice of seeking methods depends on the education level of the caregivers and most of them are elders. The concern of data leakage is also related to today's fraud issue, which may be the reason limiting the promotion of electronic products and biometrics. Further research is required, suggesting researchers should pursue improvements in lost seeking design devices in dementia for caregivers.

Avoiding low frequency noise in packaged HVAC equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebbing, C.E.; Blazier, W.E.Jr.

1993-06-01

The purpose of this article is to help those involved in the design and commissioning of packaged HVAC systems to understand the root causes of low frequency noise problems and how to avoid many of them at the design stage. In the 1980's, two things happened to dramatically change the types of noise problems encountered in typical new construction. The first was the introduction of new energy regulations that favored variable air volume (VAV) distribution systems over constant volume air distribution systems. A by-product of VAV design is that mid- and high frequency sound pressure levels produced by current airmore » terminal devices and diffusers in many applications are significantly lower than in the past. The second factor was a trend away from the use of built-up central station fan equipment in favor of packaged, floor-by-floor air handlers or rooftop units. As a result, today's HVAC system noise problems are not confined to just the roar and hiss of the past, but now include intense low frequency rumble and time modulation. Indeed, most current noise problems in modern buildings occur in the frequency range well below 250 Hz. A large fraction of these are a result of the dominant sound pressure levels in the 12 to 40 Hz region. These factors, combined with a substantial increase in the level of low frequency sound from the rest of the system, can produce a non-neutral, time modulated, rumbly sounding background noise that many people find objectionable.« less

Critical review of Ames Life Science participation in Spacelab Mission Development Test 3: The SMD 3 management study

NASA Technical Reports Server (NTRS)

Helmreich, R.; Wilhelm, J.; Tanner, T. A.; Sieber, J. E.; Burgenbauch, S.

1978-01-01

A management study was conducted to specify activities and problems encountered during the development of procedures for documentation and crew training on experiments, as well as during the design, integration, and delivery of a life sciences experiment payload to Johnson Space Center for a 7 day simulation of a Spacelab mission. Conclusions and recommendations to project management for current and future Ames' life sciences projects are included. Broader issues relevant to the conduct of future scientific missions under the constraints imposed by the environment of space are also addressed.

Consolidation of Contingency Data and Its Use in Computer Graphics to Plan Bare Base Facility Construction at a Forward Operating Location.

DTIC Science & Technology

1983-09-01

34 o D Qa. : "lo °%S .. " ig.22. aveQuitComand P L %S dU a a Troubleshooting There are several potential problems that the user may encounter when...34 Air Force Civil Engineer, Vol. 3, No. 3 (August 1962 ), pp. 6-7. 40. Roberts, Captain Mike. "Automated Drafting and Design for the Base Civil Engineer... Eglin AFB FL, undated. 216 . - ,. ° - . .. . . .. r! 57. . Explosive Safety Standards. AFR 127-100. Chapter 5: Principles and Application of Explo- sive

Mathematical modeling of solid oxide fuel cells

NASA Technical Reports Server (NTRS)

Lu, Cheng-Yi; Maloney, Thomas M.

1988-01-01

Development of predictive techniques, with regard to cell behavior, under various operating conditions is needed to improve cell performance, increase energy density, reduce manufacturing cost, and to broaden utilization of various fuels. Such technology would be especially beneficial for the solid oxide fuel cells (SOFC) at it early demonstration stage. The development of computer models to calculate the temperature, CD, reactant distributions in the tubular and monolithic SOFCs. Results indicate that problems of nonuniform heat generation and fuel gas depletion in the tubular cell module, and of size limitions in the monolithic (MOD 0) design may be encountered during FC operation.

Improved Li/BCX (thionyl chloride) cells for space applications

NASA Technical Reports Server (NTRS)

Clark, W. D. K.; Ebel, S. J.; Eberhard, D. P.; Takeuchi, E. S.

1988-01-01

New NASA requirements for the screening of lithium cells for space applications involve thermal soaks at elevated temperatures (149 C). The BCX DD and C size cells have been redesigned to pass this test with only marginal losses in capacity as was done previously for the D cells. In addition, the pressure increases in cells subjected to this high temperature environment have been characterized showing that the earlier designs failed this exposure due to lack of void volume. An improve BCX chemistry has been demonstrated which significantly improves voltage delay problems encountered after partial discharge and storage of the cells.

Neural learning of constrained nonlinear transformations

NASA Technical Reports Server (NTRS)

Barhen, Jacob; Gulati, Sandeep; Zak, Michail

1989-01-01

Two issues that are fundamental to developing autonomous intelligent robots, namely, rudimentary learning capability and dexterous manipulation, are examined. A powerful neural learning formalism is introduced for addressing a large class of nonlinear mapping problems, including redundant manipulator inverse kinematics, commonly encountered during the design of real-time adaptive control mechanisms. Artificial neural networks with terminal attractor dynamics are used. The rapid network convergence resulting from the infinite local stability of these attractors allows the development of fast neural learning algorithms. Approaches to manipulator inverse kinematics are reviewed, the neurodynamics model is discussed, and the neural learning algorithm is presented.

Status of TJ-II project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alejaldre, C.; Blaumoser, M.; Almoguera, L.

1995-04-01

The flexible Heliac TJ-II is a medium six device (R=1.5m, [a]=0.2 m, B(0)=1.0 T) in an advanced stage of construction at Centro de Investigaciones Energeticas Medio Ambientales y Tecnologicas (CIEMAT), Madrid. The problems encountered during manufacturing so far have been solved satisfactorily. Nevertheless the narrow tolerances, which result from the compact machine design, create real challenges for all the component manufacturers. In this paper we present the present status of the project with a particular emphasis on the construction situation of the main components. 1 ref., 2 figs., 1 tab.

Apollo experience report guidance and control systems: Primary guidance, navigation, and control system development

NASA Technical Reports Server (NTRS)

Holley, M. D.; Swingle, W. L.; Bachman, S. L.; Leblanc, C. J.; Howard, H. T.; Biggs, H. M.

1976-01-01

The primary guidance, navigation, and control systems for both the lunar module and the command module are described. Development of the Apollo primary guidance systems is traced from adaptation of the Polaris Mark II system through evolution from Block I to Block II configurations; the discussion includes design concepts used, test and qualification programs performed, and major problems encountered. The major subsystems (inertial, computer, and optical) are covered. Separate sections on the inertial components (gyroscopes and accelerometers) are presented because these components represent a major contribution to the success of the primary guidance, navigation, and control system.

Development of a prototype interactive learning system using multi-media technology for mission independent training program

NASA Technical Reports Server (NTRS)

Matson, Jack E.

1992-01-01

The Spacelab Mission Independent Training Program provides an overview of payload operations. Most of the training material is currently presented in workbook form with some lecture sessions to supplement selected topics. The goal of this project was to develop a prototype interactive learning system for one of the Mission Independent Training topics to demonstrate how the learning process can be improved by incorporating multi-media technology into an interactive system. This report documents the development process and some of the problems encountered during the analysis, design, and production phases of this system.

Antenna pattern interpolation by generalized Whittaker reconstruction

NASA Astrophysics Data System (ADS)

Tjonneland, K.; Lindley, A.; Balling, P.

Whittaker reconstruction is an effective tool for interpolation of band limited data. Whittaker originally introduced the interpolation formula termed the cardinal function as the function that represents a set of equispaced samples but has no periodic components of period less than twice the sample spacing. It appears that its use for reflector antennas was pioneered in France. The method is now a useful tool in the analysis and design of multiple beam reflector antenna systems. A good description of the method has been given by Bucci et al. This paper discusses some problems encountered with the method and their solution.

Apollo experience report: Lunar module communications system

NASA Technical Reports Server (NTRS)

Dietz, R. H.; Rhoades, D. E.; Davidson, L. J.

1972-01-01

The development of the lunar module communications system is traced from the initial concept to the operational system used on manned lunar missions. The problems encountered during the development, the corrective actions taken, and recommendations for similar equipment in future programs are included. The system was designed to provide communications between the lunar module and the manned space flight network, between the lunar module and the command and service module, and between the lunar module and the extravehicular crewmen. The system provided the equipment necessary for voice, telemetry, and television communications; ranging information; and various communications links.

Metal Coatings

NASA Technical Reports Server (NTRS)

1994-01-01

During the Apollo Program, General Magnaplate Corporation developed process techniques for bonding dry lubricant coatings to space metals. The coatings were not susceptible to outgassing and offered enhanced surface hardness and superior resistance to corrosion and wear. This development was necessary because conventional lubrication processes were inadequate for lightweight materials used in Apollo components. General Magnaplate built on the original technology and became a leader in development of high performance metallurgical surface enhancement coatings - "synergistic" coatings, - which are used in applications from pizza making to laser manufacture. Each of the coatings is designed to protect a specific metal or group of metals to solve problems encountered under operating conditions.

The Ames Virtual Environment Workstation: Implementation issues and requirements

NASA Technical Reports Server (NTRS)

Fisher, Scott S.; Jacoby, R.; Bryson, S.; Stone, P.; Mcdowall, I.; Bolas, M.; Dasaro, D.; Wenzel, Elizabeth M.; Coler, C.; Kerr, D.

1991-01-01

This presentation describes recent developments in the implementation of a virtual environment workstation in the Aerospace Human Factors Research Division of NASA's Ames Research Center. Introductory discussions are presented on the primary research objectives and applications of the system and on the system's current hardware and software configuration. Principle attention is then focused on unique issues and problems encountered in the workstation's development with emphasis on its ability to meet original design specifications for computational graphics performance and for associated human factors requirements necessary to provide compelling sense of presence and efficient interaction in the virtual environment.

Measuring Actual eHealth Literacy Among Patients With Rheumatic Diseases: a Qualitative Analysis of Problems Encountered Using Health 1.0 and Health 2.0 Applications

PubMed Central

Drossaert, Constance HC; de Heus, Miriam; Taal, Erik; van de Laar, Mart AFJ

2013-01-01

Background The Internet offers diverse opportunities for disease management, through information websites (Health 1.0) and interactive applications such as peer support forums, online consults, and insight into electronic medical records (Health 2.0). However, various skills are required to benefit from Health 1.0 and Health 2.0 applications for one’s own health, known as eHealth literacy. Objective To study the eHealth literacy of patients with rheumatic diseases and the types of problems they encounter when using the Internet in relation to their disease. Methods In two studies, patients were asked about their current disease-related Internet use and their eHealth literacy was observed during performance tests. In study 1, 15 patients (aged 39-74) performed 6 information-retrieval tasks on the Internet (Health 1.0). In study 2, 16 patients (aged 24-72) performed 3 Health 2.0 tasks on a hospital-based online Web portal and 2 Health 2.0 tasks on interactive websites. Participants were asked to think aloud while performing the assignments, and screen activities were recorded. Types and frequency of problems were identified by 2 independent researchers and coded into categories using inductive analysis. Results Almost all patients in our studies had searched the Internet for information about rheumatic diseases in the past. Fewer patients had used Health 2.0 applications, but many were nevertheless enthusiastic about the possibilities from Health 2.0 applications after finishing the assignments. However, nearly all participants experienced difficulties, and a substantial number of participants were not able to complete all of the assignments. Encountered problems could be divided into 6 sequential categories: (1) operating the computer and Internet browser, (2) navigating and orientating on the Web, (3) utilizing search strategies, (4) evaluating relevance and reliability, (5) adding content to the Web, and (6) protecting and respecting privacy. Most severe difficulties occurred in levels 3 and 4—in formulating a search query, evaluating the source of the information, and in scanning a website for relevant information. Conclusions Many patients have insufficient skills to properly use Health 1.0 and Health 2.0. Formulating proper search strategies and evaluating the found information caused problems among the majority of patients. Concerning Health 2.0, use and awareness of these applications is low and patients should be guided in the use of them. Our findings may contribute to the awareness of patients’ eHealth literacy problems among health professionals, and stress the importance of usability guidelines in Web design. PMID:23399720

Democracy in NGOs: Making the Cooperative Option Work.

ERIC Educational Resources Information Center

Wardle, Chris

1988-01-01

Discusses several problems encountered by nongovernmental organizations (NGOs) that structure themselves as cooperatives, with all members being equal. Presents four problem areas--(1) decision making, (2) meetings, (3) job rotation, and (4) growth--as well as strategies to solve potential problems. (CH)

The Effect of New Vocabulary on Problem Solving in Novice Physics Students.

ERIC Educational Resources Information Center

Sobolewski, Stanley J.

One of the difficulties encountered by novice problem solvers in introductory physics is in the area of problem solving. It has been shown in other studies that poor problem solvers are affected by the surface aspects of the problem in contrast with more efficient problem solvers who are capable of constructing a mental model of the physical…

Determining the Performances of Pre-Service Primary School Teachers in Problem Posing Situations

ERIC Educational Resources Information Center

Kilic, Cigdem

2013-01-01

This study examined the problem posing strategies of pre-service primary school teachers in different problem posing situations (PPSs) and analysed the issues they encounter while posing problems. A problem posing task consisting of six PPSs (two free, two structured, and two semi-structured situations) was delivered to 40 participants.…

Voyager program. Voyager 1 encounter at Jupiter, 5 March 1979

NASA Technical Reports Server (NTRS)

1979-01-01

Highlights of Voyager 1 activity during the observatory and far-encounter phases are summarized. Daily sequence of events for the spacecraft during the period of greatest encounter activity (Feb. 26 through Mar. 7) the near-encounter phase is given. Times shown designate the time of signal reception at Deep Space Network stations. Events listed emphasize activities pertaining to the four remote sensing instruments on the scan platforms. However, the other 7 experiments will continuously collect data throughout the encounter period.

Management of vertebral compression fracture in general practice: BEACH program.

PubMed

Megale, Rodrigo Z; Pollack, Allan; Britt, Helena; Latimer, Jane; Naganathan, Vasi; McLachlan, Andrew J; Ferreira, Manuela L

2017-01-01

The pain associated with vertebral compression fractures can cause significant loss of function and quality of life for older adults. Despite this, there is little consensus on how best to manage this condition. To describe usual care provided by general practitioners (GPs) in Australia for the management of vertebral compression fractures. Data from the Bettering the Evaluation And Care of Health (BEACH) program collected between April 2005 and March 2015 was used for this study. Each year, a random sample of approximately 1,000 GPs each recorded information on 100 consecutive encounters. We selected those encounters at which vertebral compression fracture was managed. Analyses of management options were limited to encounters with patients aged 50 years or over. i) patient demographics; ii) diagnoses/problems managed; iii) the management provided for vertebral compression fracture during the encounter. Robust 95% confidence intervals, adjusted for the cluster survey design, were used to assess significant differences between group means. Vertebral compression fractures were managed in 211 (0.022%; 95% CI: 0.018-0.025) of the 977,300 BEACH encounters recorded April 2005- March 2015. That provides a national annual estimate of 26,000 (95% CI: 22,000-29,000) encounters at which vertebral fractures were managed. At encounters with patients aged 50 years or over (those at higher risk of primary osteoporosis), prescription of analgesics was the most common management action, particularly opioids analgesics (47.1 per 100 vertebral fractures; 95% CI: 38.4-55.7). Prescriptions of paracetamol (8.2; 95% CI: 4-12.4) or non-steroidal anti-inflammatory drugs (4.1; 95% CI: 1.1-7.1) were less frequent. Non-pharmacological treatment was provided at a rate of 22.4 per 100 vertebral fractures (95% CI: 14.6-30.1). At least one referral (to hospital, specialist, allied health care or other) was given for 12.3 per 100 vertebral fractures (95% CI: 7.8-16.8). The prescription of oral opioid analgesics remains the common general practice approach for vertebral compression fractures management, despite the lack of evidence to support this. Clinical trials addressing management of these fractures are urgently needed to improve the quality of care patients receive.

Crafting interactivity for stakeholder engagement: transforming assumptions about communication in science and policy.

PubMed

Aakhus, Mark

2011-11-01

The International Radiation Protection Association's guiding principles for stakeholder engagement focus on fostering, facilitating, and enabling interaction among stakeholders that is inclusive and fosters competent decision making. Implicit in these standards is a call to cultivate knowledge and competence in designing communication for stakeholder engagement among radiation protection professionals. Communication as design is an approach to risk communication in science and policy that differs from, yet complements, the more well-known communication practices of informing and persuading. Design focuses on the recurring practical problem faced by professionals in making communication possible among stakeholders where it has otherwise been difficult, impossible, or even unimagined. The knowledge and competence associated with design involves principles for crafting interactivity across a variety of mediated and non-mediated encounters among stakeholders. Risk communication can be improved by cultivating expertise in scalable communication design that embraces the demands of involvement without abandoning the need for competence in science and policy communication.

Design of a spanloader cargo aircraft

NASA Technical Reports Server (NTRS)

1989-01-01

With a growing demand for fast international freight service, the slow-moving cargo ships currently in use will soon find a substantial portion of their clients looking elsewhere. One candidate for filling this expected gap in the freight market is a span-loading aircraft (or 'flying wing') capable of long-range operation with extremely large payloads. This report summarizes the design features of an aircraft capable of fulfilling a long-haul, high-capacity cargo mission. The spanloader seeks to gain advantage over conventional aircraft by eliminating the aircraft fuselage and thus reducing empty weight. The primary disadvantage of this configuration is that the cargo-containing wing tends to be thick, thus posing a challenge to the airfoil designer. It also suffers from stability and control problems not encountered by conventional aircraft. The result is an interesting, challenging exercise in unconventional design. The report that follows is a student written synopsis of an effort judged to be the best of eight designs developed during the year 1988-1989.

Helping Students Navigate Faith Challenges in the Biblical Studies Classroom

ERIC Educational Resources Information Center

Sharp, Carolyn J.; Clark-Soles, Jaime

2012-01-01

What happens when students encounter the academic study of the Bible in the seminary or undergraduate classroom? Does a teacher have a responsibility to help students navigate challenges to Christian faith that might arise? What pedagogical problems and opportunities does this encounter present? How does this issue manifest differently in…

Tips for Novice Researchers: Operational Difficulties Encountered in Underdeveloped Countries.

ERIC Educational Resources Information Center

Belcher El-Nahhas, Susan M.

This paper provides a general overview of the type of problems encountered in the field of research so that individuals who are contemplating conducting research in an underdeveloped country for the first time are better prepared, and hence, better able to complete their research. The paper recounts a female researcher's personal experiences in…

Doctor-patient communication on the telephone.

PubMed

Curtis, P; Evens, S

1989-01-01

Since its invention, the telephone has been an important tool in medical practice, particularly for primary care physicians. Approximately half the calls made to a physician's office during regular consulting hours are for clinical problems and most are handled effectively over the phone without an immediate office visit. Telephone encounters are generally very brief, and managing such calls requires a pragmatic approach that is often quite different from the approach taken in the office visit. The telephone encounter should be recognized and recorded as a specific medical interaction in the medical chart for both clinical and legal reasons. Effective telephone encounters depend on good communication skills; decision making regarding disposition is a major goal. The physician's perception of a medical problem may be different from the patient's; patients are frequently seeking advice and reassurance rather than diagnosis and treatment, and may call because of anxiety and psychological stress. For physicians and their families who are not prepared for after-hours telephone encounters, calls that interrupt more "legitimate" activities may result in anger or frustration for the physician and dissatisfaction for the patient.

Problem-Solving Examples as Interactive Learning Objects for Educational Digital Libraries

ERIC Educational Resources Information Center

Brusilovsky, Peter; Yudelson, Michael; Hsiao, I-Han

2009-01-01

The paper analyzes three major problems encountered by our team as we endeavored to turn problem solving examples in the domain of programming into highly reusable educational activities, which could be included as first class objects in various educational digital libraries. It also suggests three specific approaches to resolving these problems,…

ADOPTING THE PROBLEM BASED LEARNING APPROACH IN A GIS PROJECT MANAGEMENT CLASS

EPA Science Inventory

Problem Based Learning (PBL) is a process that emphasizes the need for developing problem solving skills through hands-on project formulation and management. A class adopting the PBL method provides students with an environment to acquire necessary knowledge to encounter, unders...

Problems in Evaluating Adult Literacy Programmes.

ERIC Educational Resources Information Center

Rajyalakshmi, C.

1980-01-01

The study of the Functional Literacy Program in India encountered problems of opposition to evaluation, inappropriate respondents, and difficulties in contacting participants, which point to changes that should be made in the evaluation methods. (SK)

76 FR 6054 - Use of Less-Than-Lethal Force: Delegation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

... report any medical problems encountered by subjects being subdued and arrested, and no medical problems.... Therefore, for accuracy in terminology, we replace the term ``non-lethal'' with the more accurate term...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witherspoon, P.A.

The problem of isolating radioactive wastes from the biosphere presents specialists in the fields of earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high level waste (HLW) which must be isolated in the underground and away from the biosphere for thousands of years. Essentially every country that is generating electricity in nuclear power plants is faced with the problem of isolating the radioactive wastes that are produced. The general consensus is that this can be accomplished by selecting an appropriate geologic setting and carefully designing the rock repository. Much newmore » technology is being developed to solve the problems that have been raised and there is a continuing need to publish the results of new developments for the benefit of all concerned. The 28th International Geologic Congress that was held July 9--19, 1989 in Washington, DC provided an opportunity for earth scientists to gather for detailed discussions on these problems. Workshop W3B on the subject, Geological Problems in Radioactive Waste Isolation -- A World Wide Review'' was organized by Paul A Witherspoon and Ghislain de Marsily and convened July 15--16, 1989 Reports from 19 countries have been gathered for this publication. Individual papers have been cataloged separately.« less

Health profiles of foreigners attending primary care clinics in Malaysia.

PubMed

Ab Rahman, Norazida; Sivasampu, Sheamini; Mohamad Noh, Kamaliah; Khoo, Ee Ming

2016-06-14

The world population has become more globalised with increasing number of people residing in another country for work or other reasons. Little is known about the health profiles of foreign population in Malaysia. The aim of this study was to provide a detailed description of the health problems presented by foreigners attending primary care clinics in Malaysia. Data were derived from the 2012 National Medical Care Survey (NMCS), a cross sectional survey of primary care encounters from public and private primary care clinics sampled from five regions in Malaysia. Patients with foreign nationality were identified and analysed for demographic profiles, reasons for encounter (RFEs), diagnosis, and provision of care. Foreigners accounted for 7.7 % (10,830) of all patient encounters from NMCS. Most encounters were from private clinics (90.2 %). Median age was 28 years (IQR: 24.0, 34.8) and 69.9 % were male. Most visits to the primary care clinics were for symptom-based complaints (69.5 %), followed by procedures (23.0 %) and follow-up visit (7.4 %). The commonest diagnosis in public clinics was antenatal care (21.8 %), followed by high risk pregnancies (7.5 %) and upper respiratory tract infection (URTI) (6.8 %). Private clinics had more cases for general medical examination (13.5 %), URTI (13.1 %) and fever (3.9 %). Medications were prescribed to 76.5 % of these encounters. More foreigners were seeking primary medical care from private clinics and the encounters were for general medical examinations and acute minor ailments. Those who sought care from public clinics were for obstetric problems and chronic diseases. Medications were prescribed to two-thirds of the encounters while other interventions: laboratory investigations, medical procedures and follow-up appointment had lower rates in private clinics. Foreigners are generally of young working group and are expected to have mandatory medical checks. The preponderance of obstetrics seen in public clinics suggests a need for improved access to maternal care and pregnancy related care. This has implication on policy and health care provision and access for foreigners and future studies are needed to look into strategies to solve these problems.

Extracting an evaluative feedback from the brain for adaptation of motor neuroprosthetic decoders.

PubMed

Mahmoudi, Babak; Principe, Jose C; Sanchez, Justin C

2010-01-01

The design of Brain-Machine Interface (BMI) neural decoders that have robust performance in changing environments encountered in daily life activity is a challenging problem. One solution to this problem is the design of neural decoders that are able to assist and adapt to the user by participating in their perception-action-reward cycle (PARC). Using inspiration both from artificial intelligence and neurobiology reinforcement learning theories, we have designed a novel decoding architecture that enables a symbiotic relationship between the user and an Intelligent Assistant (IA). By tapping into the motor and reward centers in the brain, the IA adapts the process of decoding neural motor commands into prosthetic actions based on the user's goals. The focus of this paper is on extraction of goal information directly from the brain and making it accessible to the IA as an evaluative feedback for adaptation. We have recorded the neural activity of the Nucleus Accumbens in behaving rats during a reaching task. The peri-event time histograms demonstrate a rich representation of the reward prediction in this subcortical structure that can be modeled on a single trial basis as a scalar evaluative feedback with high precision.

Health economics in drug development: efficient research to inform healthcare funding decisions.

PubMed

Hall, Peter S; McCabe, Christopher; Brown, Julia M; Cameron, David A

2010-10-01

In order to decide whether a new treatment should be used in patients, a robust estimate of efficacy and toxicity is no longer sufficient. As a result of increasing healthcare costs across the globe healthcare payers and providers now seek estimates of cost-effectiveness as well. Most trials currently being designed still only consider the need for prospective efficacy and toxicity data during the development life-cycle of a new intervention. Hence the cost-effectiveness estimates are inevitably less precise than the clinical data on which they are based. Methods based on decision theory are being developed by health economists that can contribute to the design of clinical trials in such a way that they can more effectively lead to better informed drug funding decisions on the basis of cost-effectiveness in addition to clinical outcomes. There is an opportunity to apply these techniques prospectively in the design of future clinical trials. This article describes the problems encountered by those responsible for drug reimbursement decisions as a consequence of the current drug development pathway. The potential for decision theoretic methods to help overcome these problems is introduced and potential obstacles in implementation are highlighted. Copyright © 2010 Elsevier Ltd. All rights reserved.

History-Enriched Spaces for Shared Encounters

NASA Astrophysics Data System (ADS)

Konomi, Shin'ichi; Sezaki, Kaoru; Kitsuregawa, Masaru

We discuss "history-enriched spaces" that use historical data to support shared encounters. We first examine our experiences with DeaiExplorer, a social network display that uses RFID and a historical database to support social interactions at academic conferences. This leads to our discussions on three complementary approaches to addressing the issues of supporting social encounters: (1) embedding historical data in embodied interactions, (2) designing for weakly involved interactions such as social navigation, and (3) designing for privacy. Finally, we briefly describe a preliminary prototype of a proxemics-based awareness tool that considers these approaches.

Applications of remote sensing to water resources

NASA Technical Reports Server (NTRS)

1977-01-01

Analyses were made of selected long-term (1985 and beyond) objectives, with the intent of determining if significant data-related problems would be encountered and to develop alternative solutions to any potential problems. One long-term objective selected for analysis was Water Availability Forecasting. A brief overview was scheduled in FY-77 of the objective -- primarily a fact-finding study to allow Data Management personnel to gain adequate background information to perform subsequent data system analyses. This report, includes discussions on some of the larger problems currently encountered in water measurement, the potential users of water availability forecasts, projected demands of users, current sensing accuracies, required parameter monitoring, status of forecasting modeling, and some measurement accuracies likely to be achievable by 1980 and 1990.

A continuous usability evaluation of an electronic medication administration record application.

PubMed

Vicente Oliveros, Noelia; Gramage Caro, Teresa; Pérez Menéndez-Conde, Covadonga; Álvarez-Diaz, Ana María; Martín-Aragón Álvarez, Sagrario; Bermejo Vicedo, Teresa; Delgado Silveira, Eva

2017-12-01

The complexity of an electronic medication administration record (eMAR) has been underestimated by most designers in the past. Usability issues, such as poorly designed user application flow in eMAR, are therefore of vital importance, since they can have a negative impact on nursing activities and result in poor outcomes. The purpose of this study was to evaluate the usability of an eMAR application during its development. A usability evaluation was conducted during the development of the eMAR application. Two usability methods were used: a heuristic evaluation complemented by usability testing. Each eMAR application version provided by the vendor was evaluated by 2 hospital pharmacists, who applied the heuristic method. They reviewed the eMAR tasks, detected usability problems and their heuristic violations, and rated the severity of the usability problems. Usability testing was used to assess the final application version by observing how 3 nurses interacted with the application. Thirty-four versions were assessed before the eMAR application was considered usable. During the heuristic evaluation, the usability problems decreased from 46 unique usability problems in version 1 (V1) to 9 in version 34 (V34). In V1, usability problems were categorized into 154 heuristic violations, which decreased to 27 in V34. The average severity rating also decreased from major usability problem (2.96) to no problem (0.23). During usability testing, the 3 nurses did not encounter new usability problems. A thorough heuristic evaluation is a good method for obtaining a usable eMAR application. This evaluation points key areas for improvement and decreases usability problems and their severity. © 2017 John Wiley & Sons, Ltd.

Fundamentals of Cryogenics

NASA Technical Reports Server (NTRS)

Johnson, Wesley; Tomsik, Thomas; Moder, Jeff

2014-01-01

Analysis of the extreme conditions that are encountered in cryogenic systems requires the most effort out of analysts and engineers. Due to the costs and complexity associated with the extremely cold temperatures involved, testing is sometimes minimized and extra analysis is often relied upon. This short course is designed as an introduction to cryogenic engineering and analysis, and it is intended to introduce the basic concepts related to cryogenic analysis and testing as well as help the analyst understand the impacts of various requests on a test facility. Discussion will revolve around operational functions often found in cryogenic systems, hardware for both tests and facilities, and what design or modelling tools are available for performing the analysis. Emphasis will be placed on what scenarios to use what hardware or the analysis tools to get the desired results. The class will provide a review of first principles, engineering practices, and those relations directly applicable to this subject including such topics as cryogenic fluids, thermodynamics and heat transfer, material properties at low temperature, insulation, cryogenic equipment, instrumentation, refrigeration, testing of cryogenic systems, cryogenics safety and typical thermal and fluid analysis used by the engineer. The class will provide references for further learning on various topics in cryogenics for those who want to dive deeper into the subject or have encountered specific problems.

Asset - An application in mission automation for science planning

NASA Technical Reports Server (NTRS)

Finnerty, D. F.; Martin, J.; Doms, P. E.

1987-01-01

Recent advances in computer technology were used to great advantage in planning science observation sequences for the Voyager 2 encounter with Uranus in 1986. Despite a loss of experienced personnel, a challenging schedule, workforce limitations, and the complex nature of the Uranus encounter itself, the resultant science observation timelines were the most highly optimized of the five Voyager encounters with the outer planets. In part, this was due to the development of a microcomputer-based system, called ASSET (Automated Science Sequence Encounter Timelines generator), which was used to design those science observation timelines. This paper details the development of that system. ASSET demonstrates several features essential to the design of the first expert systems for science planning which will be applied for future missions.

Learning Impasses in Problem Solving

NASA Technical Reports Server (NTRS)

Hodgson, J. P. E.

1992-01-01

Problem Solving systems customarily use backtracking to deal with obstacles that they encounter in the course of trying to solve a problem. This paper outlines an approach in which the possible obstacles are investigated prior to the search for a solution. This provides a solution strategy that avoids backtracking.

Using CAS to Solve Classical Mathematics Problems

ERIC Educational Resources Information Center

Burke, Maurice J.; Burroughs, Elizabeth A.

2009-01-01

Historically, calculus has displaced many algebraic methods for solving classical problems. This article illustrates an algebraic method for finding the zeros of polynomial functions that is closely related to Newton's method (devised in 1669, published in 1711), which is encountered in calculus. By exploring this problem, precalculus students…

Improving Audio Quality in Distance Learning Applications.

ERIC Educational Resources Information Center

Richardson, Craig H.

This paper discusses common causes of problems encountered with audio systems in distance learning networks and offers practical suggestions for correcting the problems. Problems and discussions are divided into nine categories: (1) acoustics, including reverberant classrooms leading to distorted or garbled voices, as well as one-dimensional audio…

Beyond Utility Targeting: Toward Axiological Air Operations

DTIC Science & Technology

2000-01-01

encounter the leader- sociopath , bereft of values, quite willing to live underground in hiding and in- sensitive to the absence of human comforts...that is a mere one thousand value-analysis problems to begin solving. A more difficult problem to solve is the problem of the leader- sociopath

1999 NSREC Short Course: Proton Effects and Test Issues for Satellite Designers: Displacement Effects. Section 4

NASA Technical Reports Server (NTRS)

Marshall, Cheryl J.; Marshall, Paul W.

1999-01-01

This portion of the Short Course is divided into two segments to separately address the two major proton-related effects confronting satellite designers: ionization effects and displacement damage effects. While both of these topics are deeply rooted in "traditional" descriptions of space radiation effects, there are several factors at play to cause renewed concern for satellite systems being designed today. For example, emphasis on Commercial Off-The-Shelf (COTS) technologies in both commercial and government systems increases both Total Ionizing Dose (TID) and Single Event Effect (SEE) concerns. Scaling trends exacerbate the problems, especially with regard to SEEs where protons can dominate soft error rates and even cause destructive failure. In addition, proton-induced displacement damage at fluences encountered in natural space environments can cause degradation in modern bipolar circuitry as well as in many emerging electronic and opto-electronic technologies.

Thermodynamic performance testing of the orbiter flash evaporator system

NASA Technical Reports Server (NTRS)

Jaax, J. R.; Melgares, M. A.; Frahm, J. P.

1980-01-01

System level testing of the space shuttle orbiter's development flash evaporator system (FES) was performed in a thermal vacuum chamber capable of simulating ambient ascent, orbital, and entry temperature and pressure profiles. The test article included the evaporator assembly, high load and topping exhaust duct and nozzle assemblies, and feedwater supply assembly. Steady state and transient heat load, water pressure/temperature and ambient pressure/temperature profiles were imposed by especially designed supporting test hardware. Testing in 1978 verified evaporator and duct heater thermal design, determined FES performance boundaries, and assessed topping evaporator plume characteristics. Testing in 1979 combined the FES with the other systems in the orbiter active thermal control subsystem (ATCS). The FES met or exceeded all nominal and contingency performance requirements during operation with the integrated ATCS. During both tests stability problems were encountered during steady state operations which resulted in subsequent design changes to the water spray nozzle and valve plate assemblies.

Final report on the design and development of a Rolling Float Meter for drilling-fluid outflow measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Staller, G.E.; Westmoreland, J.J.; Whitlow, G.L.

1998-03-01

Lost circulation, which is the loss of well drilling fluids to the formation while drilling, is a common problem encountered while drilling geothermal wells. The rapid detection of the loss of well drilling fluids is critical to the successful and cost-effective treatment of the wellbore to stop or minimize lost circulation. Sandia National Laboratories has developed an instrument to accurately measure the outflow rate of drilling fluids while drilling. This instrument, the Rolling Float Meter, has been under development at Sandia since 1991 and is now available for utilization by interested industry users. This report documents recent Rolling Float Metermore » design upgrades resulting from field testing and industry input, the effects of ongoing testing and evaluation both in the laboratory and in the field, and the final design package that is available to transfer this technology to industry users.« less

Navigating complex patients using an innovative tool: the MTM Spider Web.

PubMed

Morello, Candis M; Hirsch, Jan D; Lee, Kelly C

2013-01-01

To introduce a teaching tool that can be used to assess the complexity of medication therapy management (MTM) patients, prioritize appropriate interventions, and design patient-centered care plans for each encounter. MTM patients are complex as a result of multiple comorbidities, medications, and socioeconomic and behavioral issues. Pharmacists who provide MTM services are required to synthesize a plethora of information (medical and nonmedical), evaluate and prioritize the clinical problems, and design a comprehensive patient-centered care plan. The MTM Spider Web is a visual tool to facilitate this process. A description is provided regarding how to build the MTM Spider Web using case-based scenarios. This model can be used to teach pharmacists, health professional students, and patients. The MTM Spider Web is an innovative teaching tool that can be used to teach pharmacists and students how to assess complex patients and design a patient-centered care plan to deliver the most appropriate medication therapy.

The MVM imaging system and its spacecraft interactions. [Mariner Venus/Mercury TV system performance

NASA Technical Reports Server (NTRS)

Vescelus, F. E.

1975-01-01

The present work describes the main considerations and steps taken in determining the functional design of the imaging system of the Mariner Venus/Mercury (MVM) spacecraft and gives examples of some of the interactions between the spacecraft and the imaging instrument during the design and testing phases. Stringent cost and scheduling constraints dictated the use of the previous Mariner 9 dual-camera TV system. The TV parameters laid the groundwork for the imaging definition. Based on the flyby distances from Venus and Mercury and the goal of surface resolution better than 500 meters per sample pair, calculation was performed on focal length, format size, planetary coverage, and data rates. Some problems encountered in initial mechanical operation and as a result of spacecraft drift during the mission are also discussed.

The development and production of thermo-mechanically forged tool steel spur gears

NASA Technical Reports Server (NTRS)

Bamberger, E. N.

1973-01-01

A development program to establish the feasibility and applicability of high energy rate forging procedures to tool steel spur gears was performed. Included in the study were relatively standard forging procedures as well as a thermo-mechanical process termed ausforming. The subject gear configuration utilized was essentially a standard spur gear having 28 teeth, a pitch diameter of 3.5 inches and a diametral pitch of 8. Initially it had been planned to use a high contact ratio gear design, however, a comprehensive evaluation indicated that severe forging problems would be encountered as a result of the extremely small teeth required by this type of design. The forging studies were successful in achieving gear blanks having integrally formed teeth using both standard and thermo-mechanical forging procedures.

Design and fabrication of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolytic oil production in Bangladesh

NASA Astrophysics Data System (ADS)

Aziz, Mohammad Abdul; Al-khulaidi, Rami Ali; Rashid, MM; Islam, M. R.; Rashid, MAN

2017-03-01

In this research, a development and performance test of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolysis oil production was successfully completed. The characteristics of the pyrolysis oil were compared to other experimental results. A solid horizontal condenser, a burner for furnace heating and a reactor shield were designed. Due to the pilot scale pyrolytic oil production encountered numerous problems during the plant’s operation. This fixed-bed batch type pyrolysis reactor method will demonstrate the energy saving concept of solid waste tire by creating energy stability. From this experiment, product yields (wt. %) for liquid or pyrolytic oil were 49%, char 38.3 % and pyrolytic gas 12.7% with an operation running time of 185 minutes.

Technology for return of planetary samples

NASA Technical Reports Server (NTRS)

1975-01-01

The problem of returning a Mars sample to Earth was considered. The model ecosystem concept was advanced as the most reliable, sensitive method for assessing the biohazard from the Mars sample before it is permitted on Earth. Two approaches to ecosystem development were studied. In the first approach, the Mars sample would be introduced into the ecosystem and exposed to conditions which are as similar to the Martian environment as the constitutent terrestrial organisms can tolerate. In the second approach, the Mars sample would be tested to determine its effects on important terrestrial cellular functions. In addition, efforts were directed toward establishing design considerations for a Mars Planetary Receiving Laboratory. The problems encountered with the Lunar Receiving Laboratory were evaluated in this context. A questionnaire was developed to obtain information regarding important experiments to be conducted in the Planetary Receiving Laboratory.

Terminal area automatic navigation, guidance, and control research using the Microwave Landing System (MLS). Part 2: RNAV/MLS transition problems for aircraft

NASA Technical Reports Server (NTRS)

Pines, S.

1982-01-01

The problems in navigation and guidance encountered by aircraft in the initial transition period in changing from distance measuring equipment, VORTAC, and barometric instruments to the more precise microwave landing system data type navaids in the terminal area are investigated. The effects of the resulting discontinuities on the estimates of position and velocity for both optimal (Kalman type navigation schemes) and fixed gain (complementary type) navigation filters, and the effects of the errors in cross track, track angle, and altitude on the guidance equation and control commands during the critical landing phase are discussed. A method is presented to remove the discontinuities from the navigation loop and to reconstruct an RNAV path designed to land the aircraft with minimal turns and altitude changes.

Twelve tips for implementing whole-task curricula: how to make it work.

PubMed

Dolmans, Diana H J M; Wolfhagen, Ineke H A P; Van Merriënboer, Jeroen J G

2013-10-01

Whole-task models of learning and instructional design, such as problem-based learning, are nowadays very popular. Schools regularly encounter large problems when they implement whole-task curricula. The main aim of this article is to provide 12 tips that may help to make the implementation of a whole-task curriculum successful. Implementing whole-task curricula fails when the implementation is not well prepared. Requirements that must be met to make the implementation of whole task models into a success are described as twelve tips. The tips are organized in four clusters and refer to (1) the infrastructure, (2) the teachers, (3) the students, and (4) the management of the educational organization. Finally, the presented framework will be critically discussed and the importance of shared values and a change of culture is emphasized.

The BAPE 2 balloon-borne CO2

NASA Technical Reports Server (NTRS)

Degnan, J. J.; Walker, H. E.; Peruso, C. J.; Johnson, E. H.; Klein, B. J.; Mcelroy, J. H.

1972-01-01

The systems and techniques which were utilized in the experiment to establish an air-to-ground CO2 laser heterodyne link are described along with the successes and problems encountered when the heterodyne receiver and laser transmitter package were removed from the controlled environment of the laboratory. Major topics discussed include: existing systems and the underlying principles involved in their operation; experimental techniques and optical alignment methods which were found to be useful; theoretical calculations of signal strengths expected under a variety of test conditions and in actual flight; and the experimental results including problems encountered and their possible solutions.

Interim report : a non-overlay cathodic protection system.

DOT National Transportation Integrated Search

1983-01-01

This interim report describes Virginia's experience in installing its first cathodic protection system for a bridge deck. The installation was completed with practically no problems. Very minor problems have been encountered with the rectifier/contro...

Delivery of Clinical Preventive Services in Family Medicine Offices

PubMed Central

Crabtree, Benjamin F.; Miller, William L.; Tallia, Alfred F.; Cohen, Deborah J.; DiCicco-Bloom, Barbara; McIlvain, Helen E.; Aita, Virginia A.; Scott, John G.; Gregory, Patrice B.; Stange, Kurt C.; McDaniel, Reuben R.

2005-01-01

BACKGROUND This study aimed to elucidate how clinical preventive services are delivered in family practices and how this information might inform improvement efforts. METHODS We used a comparative case study design to observe clinical preventive service delivery in 18 purposefully selected Midwestern family medicine offices from 1997 to 1999. Medical records, observation of outpatient encounters, and patient exit cards were used to calculate practice-level rates of delivery of clinical preventive services. Field notes from direct observation of clinical encounters and prolonged observation of the practice and transcripts from in-depth interviews of practice staff and physicians were systematically examined to identify approaches to delivering clinical preventive services recommended by the US Preventive Services Task Force. RESULTS Practices developed individualized approaches for delivering clinical preventive services, with no one approach being successful across practices. Clinicians acknowledged a 3-fold mission of providing acute care, managing chronic problems, and prevention, but only some made prevention a priority. The clinical encounter was a central focus for preventive service delivery in all practices. Preventive services delivery rates often appeared to be influenced by competing demands within the clinical encounter (including between different preventive services), having a physician champion who prioritized prevention, and economic concerns. CONCLUSIONS Practice quality improvement efforts that assume there is an optimal approach for delivering clinical preventive services fail to account for practices’ propensity to optimize care processes to meet local contexts. Interventions to enhance clinical preventive service delivery should be tailored to meet the local needs of practices and their patient populations. PMID:16189059

Use of the Decision Support System for VA cost-effectiveness research.

PubMed

Barnett, P G; Rodgers, J H

1999-04-01

The Department of Veterans Affairs is adopting the Decision Support System (DSS), computer software and databases which include a cost-accounting system which determines the cost of health care products and patient encounters. A system for providing cost data for cost-effectiveness analysis should be provide valid, detailed, and comprehensive data that can be aggregated. The design of DSS is described and compared with those criteria. Utilization data from DSS was compared with other VA utilization data. Aggregate DSS cost data from 35 medical centers was compared with relative resource weights developed for the Medicare program. Data on hospital stays at 3 facilities found that 3.7% of the stays in DSS were not in the VA discharge database, whereas 7.6% of the stays in the discharge data were not in DSS. DSS reported between 68.8% and 97.1% of the outpatient encounters reported by six facilities in the ambulatory care data base. Relative weights for each Diagnosis Related Group based on DSS data from 35 VA facilities correlated with Medicare weights (correlation coefficient of .853). DSS will be useful for research if certain problems are overcome. It is difficult to distinguish long-term from acute hospital care. VA does not have a complete database of all inpatient procedures, so DSS has not assigned them a specific cost. The authority to access encounter-level DSS data needs to be centralized. Researchers can provide the feedback needed to improve DSS cost estimates. A comprehensive encounter-level extract would facilitate use of DSS for research.

Investigation of fatigue by Australian general practice registrars: a cross-sectional study.

PubMed

Morgan, Simon; Henderson, Kim M; Tapley, Amanda; Thomson, Allison; Wilson, Jessica; Scott, John; Spike, Neil A; McArthur, Lawrie; van Driel, Mieke L; Magin, Parker J

2015-06-01

Fatigue is the most common undifferentiated problem presenting in general practice. Previous studies have shown that this presentation leads to multiple investigations. There is no published literature describing the management of patients with fatigue by general practice (GP) registrars. To document the investigation-ordering behaviour of GP registrars in managing patients with a new diagnosis of unexplained fatigue. This was a cross-sectional analysis of data from Registrar Clinical Encounters in Training (ReCEnT), an ongoing cohort study of GP registrars' consultations. We established the prevalence of new diagnoses of unexplained fatigue and associations with that diagnosis, the rate of test ordering and the number and types of investigations ordered. 644 registrars contributed data from 68 986 encounters. In 0.78% of patient encounters, a new diagnosis of unexplained fatigue was made. Pathology was ordered in 78.4% of these problems (versus 18.1% in non-fatigue problems), at a rate of 488 tests per 100 new fatigue problems. Our study suggests that unexplained fatigue elicits a non-rational approach to test ordering by registrars. These findings contribute to the understanding of GP registrar management of fatigue, and undifferentiated presentations more broadly, and suggest educational approaches to improve practice, including dealing with uncertainty.

Observed intra-cluster correlation coefficients in a cluster survey sample of patient encounters in general practice in Australia

PubMed Central

Knox, Stephanie A; Chondros, Patty

2004-01-01

Background Cluster sample study designs are cost effective, however cluster samples violate the simple random sample assumption of independence of observations. Failure to account for the intra-cluster correlation of observations when sampling through clusters may lead to an under-powered study. Researchers therefore need estimates of intra-cluster correlation for a range of outcomes to calculate sample size. We report intra-cluster correlation coefficients observed within a large-scale cross-sectional study of general practice in Australia, where the general practitioner (GP) was the primary sampling unit and the patient encounter was the unit of inference. Methods Each year the Bettering the Evaluation and Care of Health (BEACH) study recruits a random sample of approximately 1,000 GPs across Australia. Each GP completes details of 100 consecutive patient encounters. Intra-cluster correlation coefficients were estimated for patient demographics, morbidity managed and treatments received. Intra-cluster correlation coefficients were estimated for descriptive outcomes and for associations between outcomes and predictors and were compared across two independent samples of GPs drawn three years apart. Results Between April 1999 and March 2000, a random sample of 1,047 Australian general practitioners recorded details of 104,700 patient encounters. Intra-cluster correlation coefficients for patient demographics ranged from 0.055 for patient sex to 0.451 for language spoken at home. Intra-cluster correlations for morbidity variables ranged from 0.005 for the management of eye problems to 0.059 for management of psychological problems. Intra-cluster correlation for the association between two variables was smaller than the descriptive intra-cluster correlation of each variable. When compared with the April 2002 to March 2003 sample (1,008 GPs) the estimated intra-cluster correlation coefficients were found to be consistent across samples. Conclusions The demonstrated precision and reliability of the estimated intra-cluster correlations indicate that these coefficients will be useful for calculating sample sizes in future general practice surveys that use the GP as the primary sampling unit. PMID:15613248

Optimization of coronagraph design for segmented aperture telescopes

NASA Astrophysics Data System (ADS)

Jewell, Jeffrey; Ruane, Garreth; Shaklan, Stuart; Mawet, Dimitri; Redding, Dave

2017-09-01

The goal of directly imaging Earth-like planets in the habitable zone of other stars has motivated the design of coronagraphs for use with large segmented aperture space telescopes. In order to achieve an optimal trade-off between planet light throughput and diffracted starlight suppression, we consider coronagraphs comprised of a stage of phase control implemented with deformable mirrors (or other optical elements), pupil plane apodization masks (gray scale or complex valued), and focal plane masks (either amplitude only or complex-valued, including phase only such as the vector vortex coronagraph). The optimization of these optical elements, with the goal of achieving 10 or more orders of magnitude in the suppression of on-axis (starlight) diffracted light, represents a challenging non-convex optimization problem with a nonlinear dependence on control degrees of freedom. We develop a new algorithmic approach to the design optimization problem, which we call the "Auxiliary Field Optimization" (AFO) algorithm. The central idea of the algorithm is to embed the original optimization problem, for either phase or amplitude (apodization) in various planes of the coronagraph, into a problem containing additional degrees of freedom, specifically fictitious "auxiliary" electric fields which serve as targets to inform the variation of our phase or amplitude parameters leading to good feasible designs. We present the algorithm, discuss details of its numerical implementation, and prove convergence to local minima of the objective function (here taken to be the intensity of the on-axis source in a "dark hole" region in the science focal plane). Finally, we present results showing application of the algorithm to both unobscured off-axis and obscured on-axis segmented telescope aperture designs. The application of the AFO algorithm to the coronagraph design problem has produced solutions which are capable of directly imaging planets in the habitable zone, provided end-to-end telescope system stability requirements can be met. Ongoing work includes advances of the AFO algorithm reported here to design in additional robustness to a resolved star, and other phase or amplitude aberrations to be encountered in a real segmented aperture space telescope.

Role of Enhancing Visual Effects Education Delivery to Encounter Career Challenges in Malaysia

ERIC Educational Resources Information Center

Ng, Lynn-Sze

2017-01-01

Problem-based Learning (PBL) is one of the most effective methods of instruction that helps Visual Effects (VFX) students to be more adaptable at encountering career challenges in Malaysia. These challenges are; lack of several important requirements such as, the basic and fundamental knowledge of VFX concepts, the ability to understand real-world…

Problem Solving Skills for Children.

ERIC Educational Resources Information Center

Youngs, Bettie B.

This guide was written for children, to help them handle problems they might encounter, learn about other children and how they have handled similar problems, and learn what to do when things go wrong or when they feel misunderstood. In the introduction, children are assured that, even when they have problems, they can be happy again. The body of…

Alcohol and Other Drugs on Campus: The Scope of the Problem. Infofacts/Resources

ERIC Educational Resources Information Center

Kapner, Daniel Ari

2008-01-01

The most widespread health problem on college and university campuses in the United States is high-risk alcohol and other drug (AOD) use. Recent reports confirm that the nation's campuses continue to encounter significant consequences as a result of this problem. This "Infofacts/Resources" offers an overview of the problem and highlights effective…

Mariner 10 Venus encounter. [scientific objectives and instruments for flyby observations

NASA Technical Reports Server (NTRS)

Dunne, J. A.

1974-01-01

Review of the scientific objectives of the Mariner 10 mission with regard to observations of Venus during a flyby, and description of the equipment installed on the spacecraft to fulfill these objectives. A detailed description is given of the hardware modifications made to the payload specifically for the Venus sequence. In discussing the encounter operations, two spacecraft problems which significantly affected the Venus encounter sequence are cited - namely, a failure of the television optic heaters to come on shortly after launch, and the occurrence of a roll gyro oscillation.

Efficacy of a Latino Mother–Child Communication Intervention in Elementary Schools

PubMed Central

McNaughton, Diane B.; Cowell, Julia Muennich; Fogg, Louis

2015-01-01

Children of Latino immigrants in the United States encounter ecological stressors that heighten their risk for depressive symptoms, externalizing behavior, and problems in school. Studies have shown that affirming parent–child communication is protective of child depressive symptoms and accompanying problems. The purpose of this study was to assess the efficacy of an adapted mother–child communication intervention for Latino immigrant mothers and their fourth- to sixth-grade children delivered after school. The intervention, Family Communication (“Comunicación Familiar”), was delivered at children’s elementary schools in six sessions lasting 2 hr each. Significant improvements were found in children’s reports of problem-solving communication, with their mother and mothers’ reports of reduced family conflict. Strengths of the intervention are improved mother–child communication, acquisition of communication skills that can transfer to relationships within the classroom, and a design that allows delivery by nurses or other professional members of the school support team. PMID:24643757

Efficacy of a Latino mother-child communication intervention in elementary schools.

PubMed

McNaughton, Diane B; Cowell, Julia Muennich; Fogg, Louis

2015-04-01

Children of Latino immigrants in the United States encounter ecological stressors that heighten their risk for depressive symptoms, externalizing behavior, and problems in school. Studies have shown that affirming parent-child communication is protective of child depressive symptoms and accompanying problems. The purpose of this study was to assess the efficacy of an adapted mother-child communication intervention for Latino immigrant mothers and their fourth- to sixth-grade children delivered after school. The intervention, Family Communication ("Comunicación Familiar"), was delivered at children's elementary schools in six sessions lasting 2 hr each. Significant improvements were found in children's reports of problem-solving communication, with their mother and mothers' reports of reduced family conflict. Strengths of the intervention are improved mother-child communication, acquisition of communication skills that can transfer to relationships within the classroom, and a design that allows delivery by nurses or other professional members of the school support team. © The Author(s) 2014.

An Educational Multimedia Presentation on the Introduction to Spacecraft Charging

NASA Technical Reports Server (NTRS)

Lin, E.; dePayrebrune, M.

2004-01-01

Over the last few decades, significant knowledge has been gained in how to protect spacecraft from charging; however, the continuing technical advancement in the design and build of satellites requires on-going effort in the study of spacecraft charging. A situation that we have encountered is that not all satellite designers and builders are familiar with the problem of spacecraft charging. The design of a satellite involves many talented people with diverse backgrounds, ranging from manufacturing and assembly to engineering and program management. The complex design and build of a satellite system requires people with highly specialized skills such that cross-specialization is often not achievable. As a result, designers and builders of satellites are not usually familiar with the problems outside their specialization. This is also true for spacecraft charging. Not everyone is familiar with the definition of spacecraft charging and the damage that spacecraft charging can cause. Understanding the problem is an important first step in getting everyone involved in addressing the appropriate spacecraft charging issues during the satellite design and build phases. To address this important first step, an educational multimedia presentation has been created to inform the general engineering community about the basics of spacecraft charging. The content of this educational presentation is based on relevant published technical papers. The presentation was developed using Macromedia Flash. This software produces a more dynamic learning environment than a typical slide show , resulting in a more effective learning experience. The end result is that the viewer will have learned about the basics of spacecraft charging. This presentation is available to the public through our website, www.dplscience.com, free of charge. Viewers are encouraged to pass this presentation to colleagues within their own work environment. This paper describes the content of the multimedia presentation.

Conceptualizing and measuring pharmacist-patient communication: a review of published studies.

PubMed

Shah, Bupendra; Chewning, Betty

2006-06-01

Pharmacist-patient communication in community pharmacies has been studied for over 25 years with little effort to evaluate this research comprehensively. The main objective of this review is to examine and summarize how researchers have conceptualized, defined, and measured pharmacist-patient communication across studies and identify gaps in the literature. Articles were compiled from a search of (1) Medline, IPA, CINAHL, and PubMed databases using the keywords, "counseling", "patient communication", "patient counseling", "patient education", "patient consult( *)", and/or "pharmacists", (2) bibliographies of selected articles. The search generated 56 studies on community pharmacy, of which 39 studies met the inclusion criteria. Most studies (72%) have used the term patient counseling, although pharmacist-patient communication and patient education were also used. The definition of patient counseling varies across studies. Almost half of the studies (49%) conceptualized pharmacist-patient communication solely as a pharmacist information provision activity. A total of 16 studies (41%) also focused on pharmacists' interpersonal behavior in addition to the information provision activity of the pharmacist. In contrast, patient communication behavior and the exchange process between both parties has been understudied. A total of 16 studies (41%) used a retrospective design. All studies used a cross-sectional design, with varying modes of data collection such as mail surveys, telephone interviews, nonparticipant observation, and shopper studies. Taped encounters are rare. SUMMARY/IMPLICATIONS: This review revealed that most studies have focused on a one way communication of pharmacists to patients. A need for examining the patient-pharmacist dyad is apparent. Future research could explore a greater use of taped encounters to analyze the interactive communication process, affective components of communication such as collaborative problem solving, interpersonal relationship development, and the expertise that patients bring into the encounter.

Automation--planning to implementation; the problems en route.

PubMed Central

Pizer, I H

1976-01-01

Once the major decision to automate library processes is made, there are a variety of problems which may be encountered before the planned system becomes operational. These include problems of personnel, budget, procurement of adjunct services, institutional priorities, and manufacturing uncertainties. Actual and potential difficulties are discussed. PMID:1247703

Conceptualizing Perseverance in Problem Solving as Collective Enterprise

ERIC Educational Resources Information Center

Sengupta-Irving, Tesha; Agarwal, Priyanka

2017-01-01

Students are expected to learn mathematics such that when they encounter challenging problems they will persist. Creating opportunities for students to persist in problem solving is therefore argued as essential to effective teaching and to children developing positive dispositions in mathematical learning. This analysis takes a novel approach to…

Financial Stress, Parental Depressive Symptoms, Parenting Practices, and Children's Externalizing Problem Behaviors: Underlying Processes

ERIC Educational Resources Information Center

Lee, Chih-Yuan Steven; Lee, Jaerim; August, Gerald J.

2011-01-01

This study examined the relationships among financial stress encountered by families, parents' social support, parental depressive symptoms, parenting practices, and children's externalizing problem behaviors to advance our understanding of the processes by which family financial stress is associated with children's problem behaviors. We also…

Twenty Recent Novels (and More) about Adolescents for Bibliotherapy.

ERIC Educational Resources Information Center

Hipple, Ted; Comer, Melissa; Boren, Dodie

1997-01-01

Lists 20 problems adolescents may encounter, with a description of one young adult novel in which that problem is a central feature. Some of the problems addressed include abuse, AIDS, alcohol, alienation, crime, death, disabilities, divorce, drugs, ethics, homosexuality, peer pressure, pregnancy, prejudice, rape, religious pressure, school, sex,…

Support Services for Remote Users of Online Public Access Catalogs.

ERIC Educational Resources Information Center

Kalin, Sally W.

1991-01-01

Discusses the needs of remote users of online public access catalogs (OPACs). User expectations are discussed; problems encountered by remote-access users are examined, including technical problems and searching problems; support services are described, including instruction, print guides, and online help; and differences from the needs of…

Exploring Principals' Nonroutine Problems in Bilingual Immersion Schools: Lessons Learned for Multicultural Leadership

ERIC Educational Resources Information Center

Schwabsky, Nitza

2013-01-01

The present study examines the nonroutine problems that eight Anglo-American principals encountered in managing three elementary bilingual immersion schools in the Northwest United States. Using qualitative inquiry to collect data, I employed the multisited ethnographic research model. The principals reported nonroutine problems in the following…

Another Look at the Language Difficulties of International Students

ERIC Educational Resources Information Center

Zhang, Yanyin; Mi, Yinan

2010-01-01

International students encounter language-related problems in their academic studies. Specific problem areas have been identified and possible underlying causes have been explored. The present study investigates the impact of two variables--length of study and academic disciplines--in relation to the problems. The findings from a survey and…

Transit security : a description of problems and countermeasures

DOT National Transportation Integrated Search

1984-10-01

This report provides a broad perspective on transit security. It examines a wide range of transit security problems encountered by transit systems, namely: crime against passengers and employees; crimes involving revenues, including fare evasion by p...

Initial Operation of the Nuclear Thermal Rocket Element Environmental Simulator

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.; Pearson, J. Boise; Schoenfeld, Michael P.

2015-01-01

The Nuclear Thermal Rocket Element Environmental Simulator (NTREES) facility is designed to perform realistic non-nuclear testing of nuclear thermal rocket (NTR) fuel elements and fuel materials. Although the NTREES facility cannot mimic the neutron and gamma environment of an operating NTR, it can simulate the thermal hydraulic environment within an NTR fuel element to provide critical information on material performance and compatibility. The NTREES facility has recently been upgraded such that the power capabilities of the facility have been increased significantly. At its present 1.2 MW power level, more prototypical fuel element temperatures nay now be reached. The new 1.2 MW induction heater consists of three physical units consisting of a transformer, rectifier, and inverter. This multiunit arrangement facilitated increasing the flexibility of the induction heater by more easily allowing variable frequency operation. Frequency ranges between 20 and 60 kHz can accommodated in the new induction heater allowing more representative power distributions to be generated within the test elements. The water cooling system was also upgraded to so as to be capable of removing 100% of the heat generated during testing In this new higher power configuration, NTREES will be capable of testing fuel elements and fuel materials at near-prototypic power densities. As checkout testing progressed and as higher power levels were achieved, several design deficiencies were discovered and fixed. Most of these design deficiencies were related to stray RF energy causing various components to encounter unexpected heating. Copper shielding around these components largely eliminated these problems. Other problems encountered involved unexpected movement in the coil due to electromagnetic forces and electrical arcing between the coil and a dummy test article. The coil movement and arcing which were encountered during the checkout testing effectively destroyed the induction coil in use at the time and resulted in NTREES being out of commission for a couple of months while a new stronger coil was procured. The new coil includes several additional pieces of support structure to prevent coil movement in the future. In addition, new insulating test article support components have been fabricated to prevent unexpected arcing to the test articles. Additional activities are also now underway to address ways in which the radial temperature profiles across test articles may be controlled such that they are more prototypical of what they would encounter in an operating nuclear engine. The causes of the temperature distribution problem are twofold. First, the fuel element test article is isolated in NTREES as opposed to being in the midst of many other mostly identical fuel elements in a nuclear engine. As a result, the fuel element heat flux boundary conditions in NTREES are far from adiabatic as would normally be the case in a reactor. Second, induction heating skews the power distribution such that power is preferentially deposited near the outside of the fuel element. Nuclear heating, conversely, deposits its power much more uniformly throughout the fuel element. Current studies are now looking at various schemes to adjust the amount of thermal radiation emitted from the fuel element surface so as to essentially vary the thermal boundary conditions on the test article. It is hoped that by properly adjusting the thermal boundary conditions on the fuel element test article, it may be possible to substantially correct for the inappropriate radial power distributions resulting from the induction heating so as to yield a more nearly correct temperature distribution throughout the fuel element.

A formative evaluation of CU-SeeMe

NASA Astrophysics Data System (ADS)

Bibeau, Michael

1995-02-01

CU-SeeMe is a video conferencing software package that was designed and programmed at Cornell University. The program works with the TCP/IP network protocol and allows two or more parties to conduct a real-time video conference with full audio support. In this paper we evaluate CU-SeeMe through the process of Formative Evaluation. We first perform a Critical Review of the software using a subset of the Smith and Mosier Guidelines for Human-Computer Interaction. Next, we empirically review the software interface through a series of benchmark tests that are derived directly from a set of scenarios. The scenarios attempt to model real world situations that might be encountered by an individual in the target user class. Designing benchmark tasks becomes a natural and straightforward process when they are derived from the scenario set. Empirical measures are taken for each task, including completion times and error counts. These measures are accompanied by critical incident analysis 2 7 13 which serves to identify problems with the interface and the cognitive roots of those problems. The critical incidents reported by participants are accompanied by explanations of what caused the problem and why This helps in the process of formulating solutions for observed usability problems. All the testing results are combined in the Appendix in an illustrated partial redesign of the CU-SeeMe Interface.

Adaptation of Social Problem Solving for Children Questionnaire in 6 Age Groups and its Relationships with Preschool Behavior Problems

ERIC Educational Resources Information Center

Dereli-Iman, Esra

2013-01-01

Social Problem Solving for Child Scale is frequently used to determine behavioral problems of children with their own word and to identify ways of conflict encountered in daily life, and interpersonal relationships in abroad. The primary purpose of this study was to adapt the Wally Child Social Problem-Solving Detective Game Test. In order to…

Training, age and technological change: difficulties associated with age, the design of tools, and the organization of work.

PubMed

Cau-Bareille, Dominique; Gaudart, Corinne; Delgoulet, Catherine

2012-01-01

This article presents two ergonomic studies carried out when two French administrative bodies modernized their work tools. Our objective was to identify and define the vocational learning of experienced technicians who were required to adopt new working methods to cope with these technological changes. We observed the work activity of technicians of different ages and length of service both before and during training, and also after their return to their work unit during the appropriation phase. These two studies revealed some difficulties that were common to all the technicians and others that were more specific to the older employees. In terms of the design of the training course, we were able to point out some mistaken assumptions about the technicians' original command of the work activity and the computers, which made it difficult for them to adopt new work procedures. The difficulties encountered by the older employees were ultimately found to be more an indication of organizational problems to do with the management of change rather than training problems due to age.

Design and study of piracetam-like nootropics, controversial members of the problematic class of cognition-enhancing drugs.

PubMed

Gualtieri, Fulvio; Manetti, Dina; Romanelli, Maria Novella; Ghelardini, Carla

2002-01-01

Cognition enhancers are drugs able to facilitate attentional abilities and acquisition, storage and retrieval of information, and to attenuate the impairment of cognitive functions associated with head traumas, stroke, age and age-related pathologies. Development of cognition enhancers is still a difficult task because of complexity of the brain functions, poor predictivity of animal tests and lengthy and expensive clinical trials. After the early serendipitous discovery of first generation cognition enhancers, current research is based on a variety of working hypotheses, derived from the progress of knowledge in the neurobiopathology of cognitive processes. Among other classes of drugs, piracetam-like cognition enhancers (nootropics) have never reached general acceptance, in spite of their excellent tolerability and safety. In the present review, after a general discussion of the problems connected with the design and development of cognition enhancers, the class is examined in more detail. Reasons for the problems encountered by nootropics, compounds therapeutically available and those in development, their structure activity relationships and mechanisms of action are discussed. Recent developments which hopefully will lead to a revival of the class are reviewed.

Leadership training to improve nurse retention.

PubMed

Wallis, Allan; Kennedy, Kathy I

2013-05-01

This paper discusses findings from an evaluation of a training programme designed to promote collaborative, team-based approaches to improve nurse retention within health care organizations. A year-long leadership training programme was designed and implemented to develop effective teams that could address retention challenges in a diverse set of organizations in Colorado ranging from public, private to non-profit. An evaluation, based on a combination of participant observation, group interviews, and the use of standardized tests measuring individual emotional intelligence and team dynamics was conducted to assess the effectiveness of the training programme. What role do the emotional intelligence of individual members and organizational culture play in team effectiveness? Out of five teams participating in the training programme, two performed exceptionally well, one experienced moderate success and two encountered significant problems. Team dynamics were significantly affected by the emotional intelligence of key members holding supervisory positions and by the existing culture and structure of the participating organizations. Team approaches to retention hold promise but require careful development and are most likely to work where organizations have a collaborative problem-solving environment. © 2012 Blackwell Publishing Ltd.

Mechanism for Self-Reacted Friction Stir Welding

NASA Technical Reports Server (NTRS)

Venable, Richard; Bucher, Joseph

2004-01-01

A mechanism has been designed to apply the loads (the stirring and the resection forces and torques) in self-reacted friction stir welding. This mechanism differs somewhat from mechanisms used in conventional friction stir welding, as described below. The tooling needed to apply the large reaction loads in conventional friction stir welding can be complex. Self-reacted friction stir welding has become popular in the solid-state welding community as a means of reducing the complexity of tooling and to reduce costs. The main problems inherent in self-reacted friction stir welding originate in the high stresses encountered by the pin-and-shoulder assembly that produces the weld. The design of the present mechanism solves the problems. The mechanism includes a redesigned pin-and-shoulder assembly. The welding torque is transmitted into the welding pin by a square pin that fits into a square bushing with set-screws. The opposite or back shoulder is held in place by a Woodruff key and high-strength nut on a threaded shaft. The Woodruff key reacts the torque, while the nut reacts the tensile load on the shaft.

Path optimization method for the sign problem

NASA Astrophysics Data System (ADS)

Ohnishi, Akira; Mori, Yuto; Kashiwa, Kouji

2018-03-01

We propose a path optimization method (POM) to evade the sign problem in the Monte-Carlo calculations for complex actions. Among many approaches to the sign problem, the Lefschetz-thimble path-integral method and the complex Langevin method are promising and extensively discussed. In these methods, real field variables are complexified and the integration manifold is determined by the flow equations or stochastically sampled. When we have singular points of the action or multiple critical points near the original integral surface, however, we have a risk to encounter the residual and global sign problems or the singular drift term problem. One of the ways to avoid the singular points is to optimize the integration path which is designed not to hit the singular points of the Boltzmann weight. By specifying the one-dimensional integration-path as z = t +if(t)(f ɛ R) and by optimizing f(t) to enhance the average phase factor, we demonstrate that we can avoid the sign problem in a one-variable toy model for which the complex Langevin method is found to fail. In this proceedings, we propose POM and discuss how we can avoid the sign problem in a toy model. We also discuss the possibility to utilize the neural network to optimize the path.

Adaptation problems with nursing home application for elderly persons: an application of the Roy adaptation nursing model.

PubMed

Farkas, L

1981-09-01

This study sought to identify adaptation problems on the part of elderly persons and significant others that were associated with nursing home applications for elderly persons. Within the framework of the Roy Adaptation Nursing Model, an ex post facto research design was utilized to identify these adaptation problems. The four adaptive modes in this model are: physiological, self-concept, role function, and interdependence. The study group (n = 22) and a control group of elderly persons living in Calgary, as well as their significant others, were administered a structured questionnaire. Five hypotheses relating to overall adaptation problems, powerlessness, role reversal, guilt, and knowledge and utilization of services were formulated and tested. Only the hypothesis indicating role reversal on the part of the significant others was accepted. Adaptation problems encountered by the elderly which were associated with nursing home applications occurred in the self-concept and interdependence adaptive modes. The adaptation problems perceived by the significant others, which were associated with nursing home applications for their elderly, occurred in the self-concept, role function, and interdependence modes. Adaptation problems from the significant others' perception rather than from the elderly persons' perception appear to be more significantly associated with nursing home applications.

Ethical problems and moral sensitivity in physiotherapy: a descriptive study.

PubMed

Kulju, Kati; Suhonen, Riitta; Leino-Kilpi, Helena

2013-08-01

This study identified and described ethical problems encountered by physiotherapists in their practice and physiotherapists' moral sensitivity in ethical situations. A questionnaire-based survey was constructed to identify ethical problems, and the Moral Sensitivity Questionnaire Revised version was used to measure moral sensitivity. Physiotherapists (n = 116) working in public health services responded to the questionnaire. Based on the results, most of the physiotherapists encounter ethical problems weekly. They concern mainly financial considerations, equality and justice, professionalism, unethical conduct of physiotherapists or other professions and patients' self-determination. The dimension of moral strength was emphasised in physiotherapists' self-evaluations of their moral sensitivity. As a conclusion, ethical problems do occur not only at individual level but also at organisational and society level. Physiotherapists seem to have moral strength for speaking on behalf of the patient. Scarce resources make them feel insufficient but much could still be done to provide quality care in co-operation with other health-care professionals.

Rational design of nanofiber scaffolds for orthopedic tissue repair and regeneration

PubMed Central

Ma, Bing; Xie, Jingwei; Jiang, Jiang; Shuler, Franklin D; Bartlett, David E

2013-01-01

This article reviews recent significant advances in the design of nanofiber scaffolds for orthopedic tissue repair and regeneration. It begins with a brief introduction on the limitations of current approaches for orthopedic tissue repair and regeneration. It then illustrates that rationally designed scaffolds made up of electrospun nanofibers could be a promising solution to overcome the problems that current approaches encounter. The article also discusses the intriguing properties of electrospun nanofibers, including control of composition, structures, orders, alignments and mechanical properties, use as carriers for topical drug and/or gene sustained delivery, and serving as substrates for the regulation of cell behaviors, which could benefit musculoskeletal tissue repair and regeneration. It further highlights a few of the many recent applications of electrospun nanofiber scaffolds in repairing and regenerating various orthopedic tissues. Finally, the article concludes with perspectives on the challenges and future directions for better design, fabrication and utilization of nanofiber scaffolds for orthopedic tissue engineering. PMID:23987110

Reasons for encounter and disease patterns in Danish primary care: changes over 16 years.

PubMed

Moth, Grete; Olesen, Frede; Vedsted, Peter

2012-06-01

Approximately 98% of Danish citizens are listed with a general practice which they consult for medical advice. Although 85% of the population contact their general practitioner (GP) every year, little is known about these contacts. The aim of the present paper is to gain updated knowledge about patients' reasons for encounter and the GP activities and to make comparisons with a similar study from 1993. All GPs in the Central Denmark Region were invited to register all contacts during one randomly chosen day within a year. The registration included questions about patients' reasons for encounter, the types and contents of the contacts, referrals, and distribution between new episodes and follow-up contacts. Aggregated data were compared with the results from 1993. A total of 404 (46%) GPs participated. The number of contacts per 1000 inhabitants had risen by 19.7%. The reasons for encounter and final diagnoses resembled those in 1993. Musculoskeletal, psychological, and respiratory problems were the most common reasons for encounter, psychological problems being the only type to increase over the period. Interestingly, the proportion of diagnoses within the ICPC 'A' chapter rose from 13.5 to 19.7%. The referral rate rose by 2% (relative: 18.7%) from 10.7% to 12.7% and the share of follow-up contacts rose from 45.9% to 50.4% (relative: 8.7%). Quite small changes were seen in the patterns of reasons for encounter and diagnoses from 1993 to 2009. However, an increase was found in contacts with general practice and referrals and in the proportion of follow-ups.

An analysis of the cultural problems encountered during caregiving by the nurses working in two different regions of Turkey.

PubMed

Kilic, Serap Parlar; Besen, Dilek Buyukkaya; Tokem, Yasemin; Fadiloglu, Cicek; Karadag, Gulendam

2014-06-01

The aim of this study was to identify the cultural problems encountered during caregiving by the nurses working in two university hospitals located in western and eastern Turkey. This descriptive, comparative study was conducted between July 2008 and October 2009 with 338 nurses who volunteered to take part in the study. The study data were collected using an individual description questionnaire consisting of 10 questions and another questionnaire consisting of 14 questions to identify the cultural problems encountered by nurses when giving care. The study showed with respect to training received on transcultural nursing that only 59 nurses had this training, but the percentage was higher in the nurses working at the hospital in the west (54.2%) (P > 0.05). It was found that a large number of nurses in the sample group (n = 286) gave care to at least one individual from another culture, but the percentage was significantly higher in the nurses working in the west (56.7%) than in the nurses working in the east (43.3%) (P < 0.05). When the problems experienced by the nurses during caregiving because of cultural characteristics of patients were explored, it was found that they experienced problems mostly in 'communication', and the percentage of those having problems was higher in the nurses working in the west (60.8%) (P > 0.05). The problem experienced in this area was mostly because of the fact that patients 'did not speak Turkish' (63.8%). In conclusion, the nurses gave care to patients from different cultures, and most of them had trouble when giving care to patients from different cultures. © 2013 Wiley Publishing Asia Pty Ltd.

Radio science ground data system for the Voyager-Neptune encounter, part 1

NASA Technical Reports Server (NTRS)

Kursinski, E. R.; Asmar, S. W.

1991-01-01

The Voyager radio science experiments at Neptune required the creation of a ground data system array that includes a Deep Space Network complex, the Parkes Radio Observatory, and the Usuda deep space tracking station. The performance requirements were based on experience with the previous Voyager encounters, as well as the scientific goals at Neptune. The requirements were stricter than those of the Uranus encounter because of the need to avoid the phase-stability problems experienced during that encounter and because the spacecraft flyby was faster and closer to the planet than previous encounters. The primary requirement on the instrument was to recover the phase and amplitude of the S- and X-band (2.3 and 8.4 GHz) signals under the dynamic conditions encountered during the occultations. The primary receiver type for the measurements was open loop with high phase-noise and frequency stability performance. The receiver filter bandwidth was predetermined based on the spacecraft's trajectory and frequency uncertainties.

Design and test of a prototype thermal bus evaporator reservoir aboard the KC-135 0-g aircraft

NASA Technical Reports Server (NTRS)

Brown, Richard F.; Gustafson, Eric; Long, W. Russ

1987-01-01

The Thermal Bus Zero-G Reservoir Demonstration Experiment (RDE) has currently undergone two flights on the NASA-JSC KC-135 Reduced Gravity Aircraft. The objective of the experiment, which uses a smaller version of the evaporator reservoirs being designed for the Prototype Thermal Bus for Space Station, is to demonstrate proper 0-g operation of the reservoir in terms of fluid positioning, draining, and filling. The KC-135 was chosen to provide a cost-effective and timely evaluation of 0-g design issues that would be difficult to predict analytically. A total of fifty 0-g parabolas have been flown, each providing approximately 25-30 seconds of 0-g time. While problems have been encountered, the experiment has provided valuable design data on the 0-g operation of the reservoir. This paper documents the design of the experiment; the results of both flights, based on the high-speed movies taken during the flight and the visual observations of the experimenters; and the design modifications made as a result of the first flight and planned as a result of the second flight.

Numerical System Solver Developed for the National Cycle Program

NASA Technical Reports Server (NTRS)

Binder, Michael P.

1999-01-01

As part of the National Cycle Program (NCP), a powerful new numerical solver has been developed to support the simulation of aeropropulsion systems. This software uses a hierarchical object-oriented design. It can provide steady-state and time-dependent solutions to nonlinear and even discontinuous problems typically encountered when aircraft and spacecraft propulsion systems are simulated. It also can handle constrained solutions, in which one or more factors may limit the behavior of the engine system. Timedependent simulation capabilities include adaptive time-stepping and synchronization with digital control elements. The NCP solver is playing an important role in making the NCP a flexible, powerful, and reliable simulation package.

Coupled transverse and torsional vibrations in a mechanical system with two identical beams

NASA Astrophysics Data System (ADS)

Vlase, S.; Marin, M.; Scutaru, M. L.; Munteanu, R.

2017-06-01

The paper aims to study a plane system with bars, with certain symmetries. Such problems can be encountered frequently in industry and civil engineering. Considerations related to the economy of the design process, constructive simplicity, cost and logistics make the use of identical parts a frequent procedure. The paper aims to determine the properties of the eigenvalues and eigenmodes for transverse and torsional vibrations of a mechanical system where two of the three component bars are identical. The determination of these properties allows the calculus effort and the computation time and thus increases the accuracy of the results in such matters.

Equilibrium geochemical modeling of a seasonal thermal energy storage aquifer field test

NASA Technical Reports Server (NTRS)

Stottlemyre, J. S.

1980-01-01

A geochemical mathematical modeling study designed to investigate the well plugging problems encountered at the Auburn University experimental field tests is summarized. The results, primarily of qualitative interest, include: (1) loss of injectivity was probably due to a combination of native particulate plugging and clay swelling and dispersion; (2) fluid-fluid incompatibilities, hydrothermal reactions, and oxidation reactions were of insignificant magnitude or too slow to have contributed markedly to the plugging; and (3) the potential for and contributions from temperature-induced dissolved gas solubility reductions, capillary boundary layer viscosity increases, and microstructural deformation cannot be deconvolved from the available data.

Design and construction of the POLAR detector

NASA Astrophysics Data System (ADS)

Produit, N.; Bao, T. W.; Batsch, T.; Bernasconi, T.; Britvich, I.; Cadoux, F.; Cernuda, I.; Chai, J. Y.; Dong, Y. W.; Gauvin, N.; Hajdas, W.; Kole, M.; Kong, M. N.; Kramert, R.; Li, L.; Liu, J. T.; Liu, X.; Marcinkowski, R.; Orsi, S.; Pohl, M.; Rapin, D.; Rybka, D.; Rutczynska, A.; Shi, H. L.; Socha, P.; Sun, J. C.; Song, L. M.; Szabelski, J.; Traseira, I.; Xiao, H. L.; Wang, R. J.; Wen, X.; Wu, B. B.; Zhang, L.; Zhang, L. Y.; Zhang, S. N.; Zhang, Y. J.; Zwolinska, A.

2018-01-01

The POLAR detector is a space based Gamma Ray Burst (GRB) polarimeter with a wide field of view, which covers almost half the sky. The instrument uses Compton scattering of gamma rays on a plastic scintillator hodoscope to measure the polarization of the incoming photons. The instrument has been successfully launched on board of the Chinese space laboratory Tiangong 2 on September 15, 2016. The construction of the instrument components is described in this article. Details are provided on problems encountered during the construction phase and their solutions. Initial performance of the instrument in orbit is as expected from ground tests and Monte Carlo simulation.

YUCSA: A CLIPS expert database system to monitor academic performance

NASA Technical Reports Server (NTRS)

Toptsis, Anestis A.; Ho, Frankie; Leindekar, Milton; Foon, Debra Low; Carbonaro, Mike

1991-01-01

The York University CLIPS Student Administrator (YUCSA), an expert database system implemented in C Language Integrated Processing System (CLIPS), for monitoring the academic performance of undergraduate students at York University, is discussed. The expert system component in the system has already been implemented for two major departments, and it is under testing and enhancement for more departments. Also, more elaborate user interfaces are under development. We describe the design and implementation of the system, problems encountered, and immediate future plans. The system has excellent maintainability and it is very efficient, taking less than one minute to complete an assessment of one student.

Implications of Contingency Planning Support for Weather and Icing Information

NASA Technical Reports Server (NTRS)

Vigeant-Langlois, Laurence; Hansman, R. John, Jr.

2003-01-01

A human-centered systems analysis was applied to the adverse aircraft weather encounter problem in order to identify desirable functions of weather and icing information. The importance of contingency planning was identified as emerging from a system safety design methodology as well as from results of other aviation decision-making studies. The relationship between contingency planning support and information on regions clear of adverse weather was investigated in a scenario- based analysis. A rapid prototype example of the key elements in the depiction of icing conditions was developed in a case study, and the implications for the components of the icing information system were articulated.

Floating drug delivery systems: a review.

PubMed

Arora, Shweta; Ali, Javed; Ahuja, Alka; Khar, Roop K; Baboota, Sanjula

2005-10-19

The purpose of writing this review on floating drug delivery systems (FDDS) was to compile the recent literature with special focus on the principal mechanism of floatation to achieve gastric retention. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. This review also summarizes the in vitro techniques, in vivo studies to evaluate the performance and application of floating systems, and applications of these systems. These systems are useful to several problems encountered during the development of a pharmaceutical dosage form.

Community Work and Local Authority Decision Making: Potential and Problems

ERIC Educational Resources Information Center

Corina, Lewis

1976-01-01

British local authority and decision making procedures are described for community developers. Included are potential ways of influencing the authority system, and problems and areas of weakness that may be encountered in dealing with the system. (ABM)

The Influence of Problems Faced during Internships on Interns' Views of Their Profession and Their Intention to Work in the Tourism Industry

ERIC Educational Resources Information Center

Kasli, Mehmet; Ilban, Mehmet Oguzhan

2013-01-01

Problem Statement: The problem of this research is identifying the difficulties that undergraduate students experience during their internships and assessing their future intention to work in the tourism industry. Purpose of Study: This research aims to identify the problems undergraduate students encounter as interns in tourism programs and to…

NOTES: a review of the technical problems encountered and their solutions.

PubMed

Mintz, Yoav; Horgan, Santiago; Cullen, John; Stuart, David; Falor, Eric; Talamini, Mark A

2008-08-01

Natural orifice translumenal endoscopic surgery (NOTES) is currently investigated and developed worldwide. In the past few years, multiple groups have confronted this challenge. Many technical problems are encountered in this technique due to the currently available tools for this approach. Some of the unique technical problems in NOTES include: blindly performed primary incisions; uncontrolled pneumoperitoneal pressure; no support for the endoscope in the abdominal cavity; inadequate vision; insufficient illumination; limited retraction and exposure; and the complexity of suturing and performing a safe anastomosis. In this paper, we review the problems encountered in NOTES and provide possible temporary solutions. Acute and survival studies were performed on 15 farm pigs. The hybrid technique approach (i.e., endoscopic surgery with the aid of laparoscopic vision) was performed in all cases. Procedures performed included liver biopsies, bilateral tubal ligation, oophprectomy, cholecystectomy, splenectomy and small bowel resection, and anastomosis. All attempted procedures were successfully performed. New methods and techniques were developed to overcome the technical problems. Closure of the gastrotomy was achieved by T-bar sutures and by stapler closure of the stomach incision. Small bowel anastomosis was achieved by the dual-lumen NOTES technique. The hybrid technique serves as a temporary approach to aid in developing the NOTES technique. A rectal or vaginal port of entry enables and facilitates gastrointestinal NOTES by using available laparoscopic instruments. The common operations performed today in the laparoscopic fashion could be probably performed in the NOTES approach. The safety of these procedures, however, is yet to be determined.

Acts of Attention: An Exploration of Teacher Candidates' Attention to Educational Encounters, and How It Relates to Task Formulation

ERIC Educational Resources Information Center

Harvey, Victoria A.

2015-01-01

This study begins with the belief that the ways in which teachers see and attend to educational encounters matter for their actions in classrooms. Using microethnography as a framework, this dissertation explores the relationship between teacher candidate attention, problem formulation, and action. Through analysis of the M.Ed. inquiry reports of…

Unethical Behaviours Preservice Teachers Encounter on Social Networks

ERIC Educational Resources Information Center

Deveci Topal, Arzu; Kolburan Gecer, Aynur

2015-01-01

The development of web 2.0 technology has resulted in an increase in internet sharing. The scope of this study is social networking, which is one of the web 2.0 tools most heavily used by internet users. In this paper, the unethical behaviours that preservice teachers encounter on social networks and the ways to deal with these problems are…

The value of Retrospective and Concurrent Think Aloud in formative usability testing of a physician data query tool.

PubMed

Peute, Linda W P; de Keizer, Nicolette F; Jaspers, Monique W M

2015-06-01

To compare the performance of the Concurrent (CTA) and Retrospective (RTA) Think Aloud method and to assess their value in a formative usability evaluation of an Intensive Care Registry-physician data query tool designed to support ICU quality improvement processes. Sixteen representative intensive care physicians participated in the usability evaluation study. Subjects were allocated to either the CTA or RTA method by a matched randomized design. Each subject performed six usability-testing tasks of varying complexity in the query tool in a real-working context. Methods were compared with regard to number and type of problems detected. Verbal protocols of CTA and RTA were analyzed in depth to assess differences in verbal output. Standardized measures were applied to assess thoroughness in usability problem detection weighted per problem severity level and method overall effectiveness in detecting usability problems with regard to the time subjects spent per method. The usability evaluation of the data query tool revealed a total of 43 unique usability problems that the intensive care physicians encountered. CTA detected unique usability problems with regard to graphics/symbols, navigation issues, error messages, and the organization of information on the query tool's screens. RTA detected unique issues concerning system match with subjects' language and applied terminology. The in-depth verbal protocol analysis of CTA provided information on intensive care physicians' query design strategies. Overall, CTA performed significantly better than RTA in detecting usability problems. CTA usability problem detection effectiveness was 0.80 vs. 0.62 (p<0.05) respectively, with an average difference of 42% less time spent per subject compared to RTA. In addition, CTA was more thorough in detecting usability problems of a moderate (0.85 vs. 0.7) and severe nature (0.71 vs. 0.57). In this study, the CTA is more effective in usability-problem detection and provided clarification of intensive care physician query design strategies to inform redesign of the query tool. However, CTA does not outperform RTA. The RTA additionally elucidated unique usability problems and new user requirements. Based on the results of this study, we recommend the use of CTA in formative usability evaluation studies of health information technology. However, we recommend further research on the application of RTA in usability studies with regard to user expertise and experience when focusing on user profile customized (re)design. Copyright © 2015 Elsevier Inc. All rights reserved.

Patterns of Clinical Reasoning in Physical Therapist Students.

PubMed

Gilliland, Sarah; Wainwright, Susan Flannery

2017-05-01

Clinical reasoning is a complex, nonlinear problem-solving process that is influenced by models of practice. The development of physical therapists' clinical reasoning abilities is a crucial yet underresearched aspect of entry-level (professional) physical therapist education. The purpose of this qualitative study was to examine the types of clinical reasoning strategies physical therapist students engage in during a patient encounter. A qualitative descriptive case study design involving within and across case analysis was used. Eight second-year, professional physical therapist students from 2 different programs completed an evaluation and initial intervention for a standardized patient followed by a retrospective think-aloud interview to explicate their reasoning processes. Participants' clinical reasoning strategies were examined using a 2-stage qualitative method of thematic analysis. Participants demonstrated consistent signs of development of physical therapy-specific reasoning processes, yet varied in their approach to the case and use of reflection. Participants who gave greater attention to patient education and empowerment also demonstrated greater use of reflection-in-action during the patient encounter. One negative case illustrates the variability in the rate at which students may develop these abilities. Participants demonstrated development toward physical therapist--specific clinical reasoning, yet demonstrated qualitatively different approaches to the patient encounter. Multiple factors, including the use of reflection-in-action, may enable students to develop greater flexibility in their reasoning processes. © 2017 American Physical Therapy Association

How the Medical Culture Contributes to Coworker-Perpetrated Harassment and Abuse of Family Physicians

PubMed Central

Miedema, Baukje; MacIntyre, Leslie; Tatemichi, Sue; Lambert-Lanning, Anita; Lemire, Francine; Manca, Donna; Ramsden, Vivian

2012-01-01

PURPOSE Harassment and abuse in the workplace of family physicians has been associated with higher levels of stress, increased consumption of alcohol, and higher risk for developing mental health problems. Few studies have examined issues contributing to abusive encounters in the workplace of family physicians. METHODS For the overall study we used a mixed methods design, which included a cross-sectional survey of a randomly selected sample of active family physicians from the database of the College of Family Physicians of Canada and telephone interviews with those who reported experiencing work related harassment and abuse in the last year. The data presented here arise from the qualitative interviews of the study, which were analyzed thematically. RESULTS The interview arm of the study included 23 female and 14 male participants. The major themes that emerged from the study were (1) modeling of abusive behaviors, (2) status hierarchy among various medical disciplines, (3) shortage of physicians, and (4) lack of transparent policies and follow-up procedures after abusive encounters. The results are discussed using the broken window theory. CONCLUSION Many family physicians experience harassing and abusive encounters during their training or in the workplace. The current medical culture appears to contribute to harassment and abuse in the workplace of family physicians in Canada. We described the components that intentionally or unintentionally facilitate abusive behavior in the medical culture. PMID:22412002

How the medical culture contributes to coworker-perpetrated harassment and abuse of family physicians.

PubMed

Miedema, Baukje; MacIntyre, Leslie; Tatemichi, Sue; Lambert-Lanning, Anita; Lemire, Francine; Manca, Donna; Ramsden, Vivian

2012-01-01

Harassment and abuse in the workplace of family physicians has been associated with higher levels of stress, increased consumption of alcohol, and higher risk for developing mental health problems. Few studies have examined issues contributing to abusive encounters in the workplace of family physicians. For the overall study we used a mixed methods design, which included a cross-sectional survey of a randomly selected sample of active family physicians from the database of the College of Family Physicians of Canada and telephone interviews with those who reported experiencing work related harassment and abuse in the last year. The data presented here arise from the qualitative interviews of the study, which were analyzed thematically. The interview arm of the study included 23 female and 14 male participants. The major themes that emerged from the study were (1) modeling of abusive behaviors, (2) status hierarchy among various medical disciplines, (3) shortage of physicians, and (4) lack of transparent policies and follow-up procedures after abusive encounters. The results are discussed using the broken window theory. Many family physicians experience harassing and abusive encounters during their training or in the workplace. The current medical culture appears to contribute to harassment and abuse in the workplace of family physicians in Canada. We described the components that intentionally or unintentionally facilitate abusive behavior in the medical culture.

Barriers to GPs' use of evidence-based medicine: a systematic review

PubMed Central

Zwolsman, Sandra; te Pas, Ellen; Hooft, Lotty; Waard, Margreet Wieringa-de; van Dijk, Nynke

2012-01-01

Background GPs report various barriers to the use and practice of evidence-based medicine (EBM). A review of research on these barriers may help solve problems regarding the uptake of evidence in clinical outpatient practice. Aim To determine the barriers encountered by GPs in the practice of EBM and to come up with solutions to the barriers identified. Design A systematic review of the literature. Method The following databases were searched: MEDLINE® (PubMed®), Embase, CINAHL®, ERIC, and the Cochrane Library, until February 2011. Primary studies (all methods, all languages) that explore the barriers that GPs encounter in the practice of EBM were included. Results A total of 14 700 articles were identified, of which 22 fulfilled all inclusion criteria. Of the latter, nine concerned qualitative, 12 concerned quantitative, and one concerned both qualitative and quantitative research methods. The barriers described in the articles cover the categories: evidence (including the accompanying EBM steps), the GP’s preferences (experience, expertise, education), and the patient’s preferences. The particular GP setting also has important barriers to the use of EBM. Barriers found in this review, among others, include lack of time, EBM skills, and available evidence; patient-related factors; and the attitude of the GP. Conclusion Various barriers are encountered when using EBM in GP practice. Interventions that help GPs to overcome these barriers are needed, both within EBM education and in clinical practice. PMID:22781999

Having the Memory of an Elephant: Long-Term Retrieval and the Use of Analogues in Problem Solving

ERIC Educational Resources Information Center

Chen, Zhe; Mo, Lei; Honomichl, Ryan

2004-01-01

The authors report 4 experiments exploring long-term analogical transfer from problem solutions in folk tales participants heard during childhood, many years before encountering the target problems. Substantial culture-specific analogical transfer was found when American and Chinese participants' performance was compared on isomorphs of problems…

Applying an Information Problem-Solving Model to Academic Reference Work: Findings and Implications.

ERIC Educational Resources Information Center

Cottrell, Janet R.; Eisenberg, Michael B.

2001-01-01

Examines the usefulness of the Eisenberg-Berkowitz Information Problem-Solving model as a categorization for academic reference encounters. Major trends in the data include a high proportion of questions about location and access of sources, lack of synthesis or production activities, and consistent presence of system problems that impede the…

Data System Implementation: A Leader Navigates People Problems around Technology and Data Use

ERIC Educational Resources Information Center

Cho, Vincent; Jimerson, Jo Beth; Wayman, Jeffrey C.

2015-01-01

Computer data systems have become a lynchpin to supporting school data use. However, successfully implementing such systems is no easy task. In this case, readers explore the ways in which "technology problems" and "people problems" can be intertwined. The case follows Dr. Molly Winters as she encounters social and…

Why Do Disadvantaged Filipino Children Find Word Problems in English Difficult?

ERIC Educational Resources Information Center

Bautista, Debbie; Mulligan, Joanne

2010-01-01

Young Filipino students are expected to solve mathematical word problems in English, a language that many encounter only in schools. Using individual interviews of 17 Filipino children, we investigated why word problems in English are difficult and the extent to which the language interferes with performance. Results indicate that children could…

School Nurses' Perceived Prevalence and Competence to Address Student Mental Health Problems

ERIC Educational Resources Information Center

Stephan, Sharon H.; Connors, Elizabeth H.

2013-01-01

Due to under-identification of student mental health problems and limited specialty mental health providers in schools, school nurses are often faced with identifying and addressing student mental health needs. This exploratory study assessed prevalence and types of student mental health problems encountered by school nurses, as well as their…

Molten salt corrosion of SiC and Si3N4

NASA Technical Reports Server (NTRS)

Jacobson, N. S.; Smialek, J. L.; Fox, D. S.

1986-01-01

The most severe type of corrosion encountered in heat engines is corrosion by molten sodium sulfate, formed by the reaction of ingested sodium chloride and sulfur impurities in the fuel. This problem was studied extensively for superalloys, but only recently examined for ceramics. This problem is addressed with laboratory studies to understand the fundamental reaction mechanisms and with burner studies to provide a more realistic simulation of the conditions encountered in a heat engine. In addition the effect of corrosion on the strengths of these materials was assessed. Each of these aspects will be reviewed and some ideas toward possible solutions will be discussed.

Comparison of Low-Energy Lunar Transfer Trajectories to Invariant Manifolds

NASA Technical Reports Server (NTRS)

Anderson, Rodney L.; Parker, Jeffrey S.

2011-01-01

In this study, transfer trajectories from the Earth to the Moon that encounter the Moon at various flight path angles are examined, and lunar approach trajectories are compared to the invariant manifolds of selected unstable orbits in the circular restricted three-body problem. Previous work focused on lunar impact and landing trajectories encountering the Moon normal to the surface, and this research extends the problem with different flight path angles in three dimensions. The lunar landing geometry for a range of Jacobi constants are computed, and approaches to the Moon via invariant manifolds from unstable orbits are analyzed for different energy levels.

Understanding Social and Legal Justice Issues for Aboriginal Women within the Context of an Indigenous Australian Studies Classroom: A Problem-Based Learning Approach

ERIC Educational Resources Information Center

Mackinlay, Elizabeth; Thatcher, Kristy; Seldon, Camille

2004-01-01

Problem-based learning (PBL) is a pedagogical approach in which students encounter a problem and systematically set about finding ways to understand the problem through dialogue and research. PBL is an active process where students take responsibility for their learning by asking their own questions about the problem and in this paper we explore…

Texas lignite mining: Groundwater and slope stability control in the nineties and beyond

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence J.

As lignite mining in Texas approaches and exceeds depths of 200 feet below ground level, rising costs demand that innovative mining approaches be used in order to maintain the economic viability of lignite mining. Groundwater and slope stability problems multiply at these depths, resulting in increasing focus on how to control these costs. Dewatering costs are consistently rising for the lignite industry, as deeper mining encounters more and larger saturated sand bodies. These sands require dewatering in order to improve slope stability. Planning and analysis become more important as the number of wells grows beyond what can be managed withmore » a simple {open_quotes}cookie-cutter{close_quotes} approach. Slope stability plays an increasing role in mining concerns as deeper lignite is recovered. Slope stability causes several problems, including loss of lignite, increased rehandle, and hazards to personnel and equipment. Traditional lignite mine planning involved a fairly {open_quotes}generic{close_quotes} pit design with one design highwall angle, one design spoil angle, and little geotechnical evaluation of the deposit. This {open_quotes}one mine-one design{close_quotes} approach, while cost-effective in the past, is now being replaced by a more critical analysis of the design requirements of each area. Geotechnical evaluation plays an increasing role in the planning and operational aspects of lignite mining. Laboratory core sample test results can be used for slope stability modeling, in order to obtain more accurate design and operational information.« less

Administrative encounters in general practice: low value or hidden value care?

PubMed

Trevena, Lyndal J; Harrison, Christopher; Britt, Helena C

2018-02-19

To determine the frequency of general practice administrative encounters, and to determine whether they represent low value care. Secondary analysis of data from the Bettering Evaluation and Care of Health (BEACH) dataset. 1 568 100 GP-patient encounters in Australia, 2000-01 to 2015-16. An annual nationally representative random sample of about 1000 GPs, who each recorded the details of 100 consecutive encounters with patients. Proportions of general practice encounters that were potentially low value care encounters (among the patient's reasons for the encounter was at least one administrative, medication, or referral request) and potentially low value care only encounters (such reasons were the sole reason for the encounter). For 2015-16, we also examined other health care provided by GPs at these encounters. During 2015-16, 18.5% (95% CI, 17.7-19.3%) of 97 398 GP-patient encounters were potentially low value care request encounters; 7.4% (95% CI, 7.0-7.9%) were potentially low value care only encounters. Administrative work was requested at 3.8% (95% CI, 3.5-4.0%) of GP visits, 35.4% of which were for care planning and coordination, 33.5% for certification, and 31.2% for other reasons. Medication requests were made at 13.1% (95% CI, 12.4-13.7%) of encounters; other health care was provided at 57.9% of medication request encounters, counselling, advice or education at 23.4%, and pathology testing was ordered at 16.7%. Referrals were requested at 2.8% (95% CI, 1.7-3.0%) of visits, at 69.4% of which additional health care was provided. The problems managed most frequently at potentially low value care only encounters were chronic diseases. Most patients requested certificates, medications and referrals in the context of seeking help for other health needs. Additional health care, particularly for chronic diseases, was provided at most GP administrative encounters. The MBS Review should consider the hidden value of these encounters.

Motivational Strategies and the Reframing of English: Activity Design and Challenges for Teachers in Contexts of Extensive Extramural Encounters

ERIC Educational Resources Information Center

Henry, Alastair; Korp, Helena; Sundqvist, Pia; Thorsen, Cecilia

2018-01-01

Motivational strategies are underresearched, and studies so far conducted have been in sociolinguistic contexts where English is not extensively encountered outside the classroom. Given also that little is known about strategies relating to the design and content of classroom activities, the purpose of this study is to identify and critically…

Orchestrating Professional Development for Baby Room Practitioners: Raising the Stakes in New Dialogic Encounters

ERIC Educational Resources Information Center

Goouch, Kathleen; Powell, Sacha

2013-01-01

This article has emerged from a research and development project, The Baby Room, which was designed to examine how babies are cared for in daycare settings. Within the project, a form of professional development was created which designated a central space for dialogic encounter, primarily to enable the baby room practitioners who participated in…

Understanding Teacher Perceptions in a Professional Development Program for a Middle Grade Science

NASA Astrophysics Data System (ADS)

Deloney, Dericka B.

The standards-based framework requires teachers to evaluate and in some cases change their instructional approach to more student-centered and inquiry-based in an effort to help students meet the standards. The rationale for this study was to determine the skills needed for teachers to be effective in a standard-based, problem-based learning (PBL) constructivist classroom. Traditionally, teachers in this school district transitioning from teacher to student-centered classrooms need new skills when implementing this type of instruction. A qualitative case study design served to highlight the research questions for this project study. The participants in this study participated in data collection activities that include a multiple-choice survey, an interview, and the sharing of their PBL units. Artifacts, professional development teaching resources, from the workshop added credence to the survey and interview responses. The findings from each research question addressed the teachers' perception of their understanding and the obstacles of instructional design, development, and implementation the participants encountered. The results of this study indicated that teachers had problems with designing and implementing this instructional strategy due to lack of time and resources. This data assisted the development of district specific PBL sustainable professional development program that could be adaptable to other curriculums and school systems. Social change resulting from this study could include a framework for developing K-12 professional development as well as instructional programs that incorporates PBL curriculum design to enhance the student's inquiry, problem-solving, and decision-making skills that in turn should change their academic achievement and scores on high stakes test in science.

First UMTA and AoA National Conference on Transportation for the Elderly and Handicapped

DOT National Transportation Integrated Search

1985-05-01

The Conference was highly successful in detailing problems now encountered in : providing transportation services to the elderly and handicapped and in : recommending specific solutions to those problems. There was a strong focus on : realistic, prac...

Motor carrier concerns about transportation problems in Oregon : final report.

DOT National Transportation Integrated Search

2004-03-01

This report summarizes an analysis of data from a statewide survey of freight motor carrier firms, conducted by the Oregon Department of Transportation (ODOT) in the summer of 2001, to identify freight industry concerns about problems they encounter ...

Minding Your Business: How to Avoid the Seven Deadly Financial Pitfalls.

ERIC Educational Resources Information Center

Stephens, Keith

1990-01-01

Describes financial management problems typically encountered by child care center directors and owners. Offers suggestions for planning and management techniques to overcome problems of cash flow, budgeting, rising costs, underpricing, declining revenues, fee collection, and liquidity. (NH)

Department of Homeland Security (DHS) Proficiency Testing on Small-Scale Safety and Thermal Testing of Improvised Explosives

NASA Astrophysics Data System (ADS)

Reynolds, John; Sandstrom, Mary; Brown, Geoffrey; Warner, Kirstin; Phillips, Jason; Shelley, Timothy; Reyes, Jose; Hsu, Peter

2013-06-01

One of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of improvised materials or HMEs to SSST testing, 18 HME materials were compared to 3 standard military explosives in a proficiency-type round robin study among five laboratories--2 DoD and 3 DOE--sponsored by DHS. The testing matrix has been designed to address problems encountered with improvised materials--powder mixtures, liquid suspensions, partially wetted solids, immiscible liquids, and reactive materials. Over 30 issues have been identified that indicate standard test methods may require modification when applied to HMEs to derive accurate sensitivity assessments needed for development safe handling and storage practices. This presentation will discuss experimental difficulties encountered when testing these problematic samples, show inter-laboratory testing results, show some statistical interpretation of the results, and highlight some of the testing issues. Some of the work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. LLNL-ABS-617519 (721812).

To what extent are medical interviewing skills teachable?

PubMed

Kraan, H F; Crijnen, A A; de Vries, M W; Zuidweg, J; Imbos, T; Van der Vleuten, C P

1990-01-01

Growth patterns of medical interviewing skills during a 6-year undergraduate curriculum are assessed by studying 563 medical students taken from five year-groups, interviewing simulated patients. In a cross-sectional, quasi-experimental design their skills are rated by means of the Maastricht History-taking and Advice Checklist (MAAS), an observation instrument which measures five categories of interviewing skills pertaining to initial medical consultations. The findings suggest that the skills for 'history-taking', 'presenting solutions' and 'structuring of the interview' are effectively learned. These learning effects result from a continuous small group teaching program with expert and peer review of videotaped encounters with simulated patients. The teaching effects of this program seem less for the skills pertinent to the phase of 'exploring the reasons for encounter' and to the 'basic interviewing skills', because the students' growing medical knowledge and the increasing ability to solve medical problems exert a counteracting influence on the acquisition of these easily deteriorating skills. The results might be helpful to curriculum planners in order to make their programs for medical interviewing skills more effective.

Solving the Capacitive Effect in the High-Frequency sweep for Langmuir Probe in SYMPLE

NASA Astrophysics Data System (ADS)

Pramila; Patel, J. J.; Rajpal, R.; Hansalia, C. J.; Anitha, V. P.; Sathyanarayana, K.

2017-04-01

Langmuir Probe based measurements need to be routinely carried out to measure various plasma parameters such as the electron density (ne), the electron temperature (Te), the floating potential (Vf), and the plasma potential (Vp). For this, the diagnostic electronics along with the biasing power supplies is installed in standard industrial racks with a 2KV isolation transformer. The Signal Conditioning Electronics (SCE) system is populated inside the 4U-chassis based system with the front-end electronics, designed using high common mode differential amplifiers which can measure small differential signal in presence of high common mode dc- bias or ac ramp voltage used for biasing the probes. DC-biasing of the probe is most common method for getting its I-V characteristic but method of biasing the probe with a sweep at high frequency encounters the problem of corruption of signal due to capacitive effect specially when the sweep period and the discharge time is very fast and die down in the order of μs or lesser. This paper presents and summarises the method of removing such effects encountered while measuring the probe current.

Thinning of Large Biological Cells for Cryo-TEM Characterization by Cryo-FIB Milling

PubMed Central

Strunk, Korrinn M.; Ke, Danxia; Gray, Jennifer L.; Zhang, Peijun

2013-01-01

SUMMARY Focused ion beam milling at cryogenic temperatures (cryo-FIB) is a valuable tool that can be used to thin vitreous biological specimens for subsequent imaging and analysis in a cryo-transmission electron microscope (cryo-TEM) in their frozen-hydrated state. This technique offers the potential benefit of eliminating the mechanical artifacts that are typically found with cryo-ultramicrotomy. However, due to the additional complexity in transferring samples in and out of the FIB, contamination and devitrification of the amorphous ice is commonly encountered. In order to address these problems, we have designed a new sample cryo-shuttle that specifically accepts Polara TEM cartridges directly in order to simplify the transfer process between the FIB and TEM. We used the quality of the ice in the sample as an indicator to test various parameters used the process, and demonstrated with successful milling of large mammalian cells. By comparing the results from larger HeLa cells to those from E. coli cells, we discuss some of the artifacts and challenges we have encountered using this technique. PMID:22906009

Nisin as a Food Preservative: Part 2: Antimicrobial Polymer Materials Containing Nisin.

PubMed

Gharsallaoui, Adem; Joly, Catherine; Oulahal, Nadia; Degraeve, Pascal

2016-06-10

Nisin is the only bacteriocin approved as a food preservative because of its antibacterial effectiveness and its negligible toxicity for humans. Typical problems encountered when nisin is directly added to foods are mainly fat adsorption leading to activity loss, heterogeneous distribution in the food matrix, inactivation by proteolytic enzymes, and emergence of resistance in normally sensitive bacteria strains. To overcome these problems, nisin can be immobilized in solid matrices that must act as diffusional barriers and allow controlling its release rate. This strategy allows maintaining a just sufficient nisin concentration at the food surface. The design of such antimicrobial materials must consider both bacterial growth kinetics but also nisin release kinetics. In this review, nisin incorporation in polymer-based materials will be discussed and special emphasis will be on the applications and properties of antimicrobial food packaging containing this bacteriocin.

Experimental Replication of an Aeroengine Combustion Instability

NASA Technical Reports Server (NTRS)

Cohen, J. M.; Hibshman, J. R.; Proscia, W.; Rosfjord, T. J.; Wake, B. E.; McVey, J. B.; Lovett, J.; Ondas, M.; DeLaat, J.; Breisacher, K.

2000-01-01

Combustion instabilities in gas turbine engines are most frequently encountered during the late phases of engine development, at which point they are difficult and expensive to fix. The ability to replicate an engine-traceable combustion instability in a laboratory-scale experiment offers the opportunity to economically diagnose the problem (to determine the root cause), and to investigate solutions to the problem, such as active control. The development and validation of active combustion instability control requires that the causal dynamic processes be reproduced in experimental test facilities which can be used as a test bed for control system evaluation. This paper discusses the process through which a laboratory-scale experiment was designed to replicate an instability observed in a developmental engine. The scaling process used physically-based analyses to preserve the relevant geometric, acoustic and thermo-fluid features. The process increases the probability that results achieved in the single-nozzle experiment will be scalable to the engine.

Development of welded metal bellows having minimum effective diameter change

NASA Technical Reports Server (NTRS)

Henschel, J. K.; Stevens, J. B.; Harvey, A. C.; Howland, J. S.; Rhee, S. S.

1972-01-01

A program of analysis, design, and fabrication was conducted to develop welded metal bellows having a minimum change in effective diameter for cryogenic turbomachinery face seal applications. Linear analysis of the principle types of bellows provided identification of concepts capable of meeting basic operation requirements. For the 6-inch (.152 m) mean diameter, 1.5-inch free length bellows studied, nonlinear analysis showed that opposed and nested toroidal bellows plates stiffened by means of alternating stiffener rings were capable of maintaining constant effective diameter within 0.3% and 0.1% respectively under the operating conditions of interest. Changes in effective diameter were due principally to bellows axial deflection with pressure differential having a lesser influence. Fabrication problems associated with joining the thin bellows plates to the relatively heavy stiffener rings were encountered and precluded assembly and testing of a bellows core. Fabrication problems are summarized and recommended fabrication methods for future effort are presented.

Auto-tuning for NMR probe using LabVIEW

NASA Astrophysics Data System (ADS)

Quen, Carmen; Pham, Stephanie; Bernal, Oscar

2014-03-01

Typical manual NMR-tuning method is not suitable for broadband spectra spanning several megahertz linewidths. Among the main problems encountered during manual tuning are pulse-power reproducibility, baselines, and transmission line reflections, to name a few. We present a design of an auto-tuning system using graphic programming language, LabVIEW, to minimize these problems. The program uses a simplified model of the NMR probe conditions near perfect tuning to mimic the tuning process and predict the position of the capacitor shafts needed to achieve the desirable impedance. The tuning capacitors of the probe are controlled by stepper motors through a LabVIEW/computer interface. Our program calculates the effective capacitance needed to tune the probe and provides controlling parameters to advance the motors in the right direction. The impedance reading of a network analyzer can be used to correct the model parameters in real time for feedback control.

Photocatalytic generation of hydrogen from water

NASA Technical Reports Server (NTRS)

Bottoms, W. R.; Miles, R. B.

1976-01-01

A concept designed to overcome the problems encountered when using photodissociation for the generation of hydrogen is discussed. The problems limiting the efficiency of photodissociation of water are the separation of the photolysis products and the high energy photons necessary for the reaction. It is shown that the dissociation energy of a large number of molecules is catalytically reduced when these molecules are in intimate contact with the surface of certain metals. It is proposed to develop a surface which will take advantage of this catalytic shift in dissociation energies to reduce the photon energy required to produce hydrogen. This same catalytic surface can be used to separate the reaction products if it is made so that one of the dissociations products is soluble in the metal and others are not. This condition is met by many metal systems such as platinum group metals which have been used commercially to separate hydrogen from other gases and liquids.

Clinically speaking: A communication skills program for students from non-English speaking backgrounds.

PubMed

Miguel, Caroline San; Rogan, Fran; Kilstoff, Kathleen; Brown, Di

2006-09-01

This paper reports on the design, delivery and evaluation of an innovative oral communication skills program for first year students in a Bachelor of Nursing degree at an Australian university. This program was introduced in 2004 to meet the needs of first year undergraduate students from non-English speaking backgrounds who had experienced difficulties with spoken English while on clinical placement. The program consisted of early identification of students in need of communication development, a series of classes incorporated into the degree program to address students' needs, followed by a clinical placement block. This paper describes the structure of the program, discusses some of the major problems encountered by students in the clinical setting and presents some of the teaching strategies used to address these problems. Evaluations of the program suggest that students' communication skills and confidence improved, resulting in a more positive clinical experience for the majority of students.

Interactive visualization tools for the structural biologist.

PubMed

Porebski, Benjamin T; Ho, Bosco K; Buckle, Ashley M

2013-10-01

In structural biology, management of a large number of Protein Data Bank (PDB) files and raw X-ray diffraction images often presents a major organizational problem. Existing software packages that manipulate these file types were not designed for these kinds of file-management tasks. This is typically encountered when browsing through a folder of hundreds of X-ray images, with the aim of rapidly inspecting the diffraction quality of a data set. To solve this problem, a useful functionality of the Macintosh operating system (OSX) has been exploited that allows custom visualization plugins to be attached to certain file types. Software plugins have been developed for diffraction images and PDB files, which in many scenarios can save considerable time and effort. The direct visualization of diffraction images and PDB structures in the file browser can be used to identify key files of interest simply by scrolling through a list of files.

Improved Method for Prediction of Attainable Wing Leading-Edge Thrust

NASA Technical Reports Server (NTRS)

Carlson, Harry W.; McElroy, Marcus O.; Lessard, Wendy B.; McCullers, L. Arnold

1996-01-01

Prediction of the loss of wing leading-edge thrust and the accompanying increase in drag due to lift, when flow is not completely attached, presents a difficult but commonly encountered problem. A method (called the previous method) for the prediction of attainable leading-edge thrust and the resultant effect on airplane aerodynamic performance has been in use for more than a decade. Recently, the method has been revised to enhance its applicability to current airplane design and evaluation problems. The improved method (called the present method) provides for a greater range of airfoil shapes from very sharp to very blunt leading edges. It is also based on a wider range of Reynolds numbers than was available for the previous method. The present method, when employed in computer codes for aerodynamic analysis, generally results in improved correlation with experimental wing-body axial-force data and provides reasonable estimates of the measured drag.

SLC: The End Game

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raimondi, Pantaleo

The design of the Stanford Linear Collider (SLC) called for a beam intensity far beyond what was practically achievable. This was due to intrinsic limitations in many subsystems and to a lack of understanding of the new physics of linear colliders. Real progress in improving the SLC performance came from precision, non-invasive diagnostics to measure and monitor the beams and from new techniques to control the emittance dilution and optimize the beams. A major contribution to the success of the last 1997-98 SLC run came from several innovative ideas for improving the performance of the Final Focus (FF). This papermore » describes some of the problems encountered and techniques used to overcome them. Building on the SLC experience, we will also present a new approach to the FF design for future high energy linear colliders.« less

Review of nonconventional bioreactor technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turick, C.E.; Mcllwain, M.E.

1993-09-01

Biotechnology will significantly affect many industrial sectors in the future. Industrial sectors that will be affected include pharmaceutical, chemical, fuel, agricultural, and environmental remediation. Future research is needed to improve bioprocessing efficiency and cost-effectiveness in order to compete with traditional technologies. This report describes recent advances in bioprocess technologies and bioreactor designs and relates them to problems encountered in many industrial bioprocessing operations. The primary focus is directed towards increasing gas and vapor transfer for enhanced bioprocess kinetics as well as unproved by-product separation and removal. The advantages and disadvantages of various conceptual designs such as hollow-fiber, gas-phase, hyperbaric/hypobaric, andmore » electrochemical bioreactors are also discussed. Specific applications that are intended for improved bioprocesses include coal desulfurization, coal liquefaction, soil bioremediation, biomass conversion to marketable chemicals, biomining, and biohydrometallurgy as well as bioprocessing of gases and vapors.« less

Polybasic esters: Novel synthetic lubricants designed for use in HFC compressors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lilje, K.C.; Sabahi, M.; Hamid, S.

1995-12-31

The replacement of ozone-depleting refrigerants with ozone-friendly hydrofluorocarbons (HFCs) requires the use of lubricants that have not historically been used in refrigeration compressors and systems. Polyalkylene glycol (PAG) and polyol ester (POE) lubricants have been extensively evaluated in various refrigeration applications and are being used commercially. Novel synthetic lubricants have been developed based on polybasic esters (PBEs) resulting from malonate-acrylate Michael adducts. These lubricants were designed to address problems encountered in current HFC systems. PBE-based fluids show desired miscibility with R-134a and other HFC blends, excellent hydrolytic stability, no copper plating (even in wet systems), and excellent lubricity. All ofmore » these properties are obtained without the use of performance-enhancing additives. Key physical property data, bench and compressor test results, and compatibility study results will be presented.« less

Conducting field studies for testing pesticide leaching models

USGS Publications Warehouse

Smith, Charles N.; Parrish, Rudolph S.; Brown, David S.

1990-01-01

A variety of predictive models are being applied to evaluate the transport and transformation of pesticides in the environment. These include well known models such as the Pesticide Root Zone Model (PRZM), the Risk of Unsaturated-Saturated Transport and Transformation Interactions for Chemical Concentrations Model (RUSTIC) and the Groundwater Loading Effects of Agricultural Management Systems Model (GLEAMS). The potentially large impacts of using these models as tools for developing pesticide management strategies and regulatory decisions necessitates development of sound model validation protocols. This paper offers guidance on many of the theoretical and practical problems encountered in the design and implementation of field-scale model validation studies. Recommendations are provided for site selection and characterization, test compound selection, data needs, measurement techniques, statistical design considerations and sampling techniques. A strategy is provided for quantitatively testing models using field measurements.

Optimal Planning and Problem-Solving

NASA Technical Reports Server (NTRS)

Clemet, Bradley; Schaffer, Steven; Rabideau, Gregg

2008-01-01

CTAEMS MDP Optimal Planner is a problem-solving software designed to command a single spacecraft/rover, or a team of spacecraft/rovers, to perform the best action possible at all times according to an abstract model of the spacecraft/rover and its environment. It also may be useful in solving logistical problems encountered in commercial applications such as shipping and manufacturing. The planner reasons around uncertainty according to specified probabilities of outcomes using a plan hierarchy to avoid exploring certain kinds of suboptimal actions. Also, planned actions are calculated as the state-action space is expanded, rather than afterward, to reduce by an order of magnitude the processing time and memory used. The software solves planning problems with actions that can execute concurrently, that have uncertain duration and quality, and that have functional dependencies on others that affect quality. These problems are modeled in a hierarchical planning language called C_TAEMS, a derivative of the TAEMS language for specifying domains for the DARPA Coordinators program. In realistic environments, actions often have uncertain outcomes and can have complex relationships with other tasks. The planner approaches problems by considering all possible actions that may be taken from any state reachable from a given, initial state, and from within the constraints of a given task hierarchy that specifies what tasks may be performed by which team member.

Use of computer modeling to investigate a dynamic interaction problem in the Skylab TACS quad-valve package

NASA Technical Reports Server (NTRS)

Hesser, R. J.; Gershman, R.

1975-01-01

A valve opening-response problem encountered during development of a control valve for the Skylab thruster attitude control system (TACS) is described. The problem involved effects of dynamic interaction among valves in the quad-redundant valve package. Also described is a detailed computer simulation of the quad-valve package which was helpful in resolving the problem.

Decision-problem state analysis methodology

NASA Technical Reports Server (NTRS)

Dieterly, D. L.

1980-01-01

A methodology for analyzing a decision-problem state is presented. The methodology is based on the analysis of an incident in terms of the set of decision-problem conditions encountered. By decomposing the events that preceded an unwanted outcome, such as an accident, into the set of decision-problem conditions that were resolved, a more comprehensive understanding is possible. All human-error accidents are not caused by faulty decision-problem resolutions, but it appears to be one of the major areas of accidents cited in the literature. A three-phase methodology is presented which accommodates a wide spectrum of events. It allows for a systems content analysis of the available data to establish: (1) the resolutions made, (2) alternatives not considered, (3) resolutions missed, and (4) possible conditions not considered. The product is a map of the decision-problem conditions that were encountered as well as a projected, assumed set of conditions that should have been considered. The application of this methodology introduces a systematic approach to decomposing the events that transpired prior to the accident. The initial emphasis is on decision and problem resolution. The technique allows for a standardized method of accident into a scenario which may used for review or the development of a training simulation.

In Print or Out of Print? The Continuing Problem.

ERIC Educational Resources Information Center

Kayden, Mimi

1982-01-01

Briefly describes the problems encountered by libraries in attempting to purchase out-of-stock books and discusses some of the reasons for changes in the way publishers handle backlist materials, including sales volume and its relation to increased printing costs. (JL)

The Impaired Social Worker.

ERIC Educational Resources Information Center

Reamer, Frederic G.

1992-01-01

Discusses concept of the impaired professional; reviews research on various types of impairment (personality disorders, depression and other emotional problems, marital problems, and physical illness), prevalence and causes of impairment, and responses to it; and outlines model assessment and action plan for social workers who encounter an…

The Brown University Child and Adolescent Behavior Letter, 1999.

ERIC Educational Resources Information Center

Lipsitt, Lewis P., Ed.

1999-01-01

These 12 monthly issues from 1999 explore problems encountered by children and adolescents. Regular features include "Keep Your Eye On...," brief accounts of research into childhood and adolescent problems; "What's New in Research," summarizing research from recent publications and professional conferences;…

Practical Parenting: Successful Strategies for Solving Your Child's Behaviour Problems.

ERIC Educational Resources Information Center

Stenhouse, Glen

Recognizing that all parents encounter challenges in raising their children, this book presents practical strategies for solving common behavior problems. Chapter 1, "Bonding," concerns the development of parent-child attachment. Chapter 2, "Encouraging Development," discusses "hot-housing," language development, and…

Segregation of asphalt mixes caused by surge silos : final report.

DOT National Transportation Integrated Search

1982-01-01

Segregation of asphalt mixes continues to be a problem in Virginia, particularly with base mixes and coarse surface mixes. Although the problem is encountered primarily on jobs using surge silos, it has been related to other factors such as mix desig...