Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

NASA Astrophysics Data System (ADS)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

Examining Young Students' Problem Scoping in Engineering Design

ERIC Educational Resources Information Center

Watkins, Jessica; Spencer, Kathleen; Hammer, David

2014-01-01

Problem scoping--determining the nature and boundaries of a problem--is an essential aspect of the engineering design process. Some studies from engineering education suggest that beginning students tend to skip problem scoping or oversimplify a problem. However, the ways these studies often characterize students' problem scoping often do not…

Career Development by Design.

ERIC Educational Resources Information Center

Hanna, Sharon L.

This book is intended to guide the reader in the process of designing his or her career and achieving it. Chapter 1 begins with a look at self: developing areas of self, personality type, self-concept, and self-efficacy, making positive personality changes, sharpening basic skills, and evaluating career potential. Chapter 2 explores developing…

Designing a Language Study.

ERIC Educational Resources Information Center

Brown, James Dean

Some issues in the design of classroom research on second language teaching are discussed, with the intention of helping the researcher avoid conceptual pitfalls that may cripple the study later in the process. This begins with an examination of concerns in sampling, including definition of a population to be studied, alternative sampling…

Learning to Draw through Digital Modelling

ERIC Educational Resources Information Center

Temple, Stephen

2016-01-01

The education of architectural designers begins by learning drawing and digital modelling following the notion that students learn these new modes as instruments of thinking in design process. Curricular arguments persist about which mode should follow the other. Difficulties occur when one mode replaces the other. Students uninitiated to design…

The opto-mechanical design process: from vision to reality

NASA Astrophysics Data System (ADS)

Kvamme, E. Todd; Stubbs, David M.; Jacoby, Michael S.

2017-08-01

The design process for an opto-mechanical sub-system is discussed from requirements development through test. The process begins with a proper mission understanding and the development of requirements for the system. Preliminary design activities are then discussed with iterative analysis and design work being shared between the design, thermal, and structural engineering personnel. Readiness for preliminary review and the path to a final design review are considered. The value of prototyping and risk mitigation testing is examined with a focus on when it makes sense to execute a prototype test program. System level margin is discussed in general terms, and the practice of trading margin in one area of performance to meet another area is reviewed. Requirements verification and validation is briefly considered. Testing and its relationship to requirements verification concludes the design process.

Design-Based Research and Video Game Based Learning: Developing the Educational Video Game "Citizen Science"

ERIC Educational Resources Information Center

Gaydos, Matthew J.

2013-01-01

This paper presents a series of studies detailing the research and development of the educational science video game "Citizen Science." It documents the design process, beginning with the initial grant and ending with a case study of two teachers who used the game in their classrooms. Following a design-based research approach, this…

KSC-2010-4934

NASA Image and Video Library

2010-09-30

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians begin the process of attaching an overhead hoist to the Alpha Magnetic Spectrometer (AMS) for its move to a rotation stand to begin processing for flight. AMS, a state-of-the-art particle physics detector, is designed to operate as an external experiment on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the station aboard space shuttle Endeavour's STS-134 mission targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Jack Pfaller

Naval Systems Engineering Guide

DTIC Science & Technology

2004-10-01

Decision Critical Design Review System Integration Activities IOC FRP Decision Review Production & Deployment Sustainment IOT & FOC Sustainmen...reentered when things change significantly, such as funding, requirements, or schedule. This process must start at the very beginning of a Major...outputs through sub-processes will reveal a number of things : a. Determine the level of process applicability and tailoring required. b. Additional

The Effect of a Collaborative Mentoring Program on Beginning Science Teachers' Inquiry-based Teaching Practice

NASA Astrophysics Data System (ADS)

Nam, Jeonghee; Seung, Eulsun; Go, MunSuk

2013-03-01

This study investigated how a collaborative mentoring program influenced beginning science teachers' inquiry-based teaching and their reflection on practice. The one-year program consisted of five one-on-one mentoring meetings, weekly science education seminars, weekly mentoring group discussions, and self-evaluation activities. The participants were three beginning science teachers and three mentors at the middle school level (7-9th grades) in an urban area of South Korea. For each beginning teacher, five lessons were evaluated in terms of lesson design/implementation, procedural knowledge, and classroom culture by using the Reformed Teaching Observation Protocol. Five aspects of the beginning teachers' reflections were identified. This study showed that a collaborative mentoring program focusing on inquiry-based science teaching encouraged the beginning teachers to reflect on their own perceptions and teaching practice in terms of inquiry-based science teaching, which led to changes in their teaching practice. This study also highlighted the importance of collaborative interactions between the mentors and the beginning teachers during the mentoring process.

2010 Anthropometric Survey of U.S. Marine Corps Personnel: Methods and Summary Statistics

DTIC Science & Technology

2013-06-01

models for the ergonomic design of working environments. Today, the entire production chain for a piece of clothing, beginning with the design and...Corps 382 crewstations and workstations. Digital models are increasingly used in the design process for seated and standing workstations, as well...International Standards for Ergonomic Design : These dimensions are useful for comparing data sets between nations, and are measured according to

School Improvement: A Resource and Planning Guide. Bulletin No. 8448.

ERIC Educational Resources Information Center

Gomoll, Robert; Burke, Peter J.

This guide describes a design for building-level school improvement in the state of Wisconsin. Summarized is effective-schools research that is designed to encourage schools and districts to become familiar with and engage in the improvement process. The first section describes what a school district needs to consider when beginning the school…

LegiQuest

ERIC Educational Resources Information Center

Buck Institute for Education, 2004

2004-01-01

This unit is designed to teach students about how a bill becomes law and how interest groups participate in and impact this process. LegiQuest teaches students about the roles of Congress, the President, and the courts in the legislative process. It can be used at the beginning of the course to introduce the functions and branches of government.…

A Qualitative Analysis of College Women's Leaving Processes in Abusive Relationships

ERIC Educational Resources Information Center

Edwards, Katie M.; Murphy, Megan J.; Tansill, Erin C.; Myrick, Christina; Probst, Danielle R.; Corsa, Rebecca; Gidycz, Christine A.

2012-01-01

Objective: This study assessed the process of leaving an abusive dating relationship utilizing a qualitative design. Methods: Participants included 123 college women in abusive dating relationships who participated at the beginning and end of a 10-week academic quarter. Results: Qualitative content analyses were used to analyze the transcribed…

Competency-Based Course Outlines for Business and Office Education. Accounting, Business Data Processing, Clerical Accounting, and Record Keeping Occupations.

ERIC Educational Resources Information Center

Ricks, Betty R., Ed.; Schmidt, B. June, Ed.

Designed to assist business educators with the implementation of competency-based instruction, these course outlines identify recommended competencies and skill areas for beginning workers in accounting, business data processing, clerical accounting, and recordkeeping occupations. Each outline contains listings of enabling, terminal, and personal…

Understanding and Minimizing Staff Burnout. An Introductory Packet.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for Mental Health Schools.

Staff who bring a mental health perspective to the schools can deal with problems of staff burnout. This packet is designed to help in beginning the process of minimizing burnout, a process that requires reducing environmental stressors, increasing personal capabilities, and enhancing job supports. The packet opens with brief discussions of "What…

Mine design: Long term effects of high extraction mining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeran, P.W.

1996-12-31

A consideration when designing a high extraction coal mine is the effects that mining will have on the ground above the mine. This becomes particularly important when the surface has been improved or is inhabited. Surface owners are concerned about; when the effects will begin? how large will they be? and how long they will last? Each of these should be addressed by the designer. For more than a decade, the US Bureau of Mines (USBM) has been monitoring subsidence at various sites. Based upon the data gathered, some inferences may be made regarding the above stated questions. Essentially surfacemore » movement begins with undermining. The magnitude of the movements are proportional to the thickness extracted and the width of the mined area, and inversely proportional to the depth of the mine below surface. The duration of the subsidence process in the northern Appalachian Basin is approximately one year. The USBM has developed a computer model which predicts the final subsidence profile across a longwall panel in the northern Appalachian Coal Basin. USBM studies on the dynamic development of subsidence have shown that the magnitude of the deformations developed during the subsidence process never exceed those exhibited in the final subsidence profile. Use of the model will provide engineers with a starting point in the design process.« less

BIOMONITORING OF EXPOSURE IN FARMWORKER STUDIES

EPA Science Inventory

Though biomonitoring has been used in many occupational and environmental health and exposure studies, we are only beginning to understand the complexities and uncertainties involved with the biomonitoring process -- from study design, to sample collection, to chemical analysis -...

Career-Focused Education for Ohio's Students: Sample Instructional Units. Integrated Technical and Academic Competencies (ITAC).

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This book is designed to help academic teachers in middle or secondary education develop an appreciation of career-focused education and begin the process of designing career-focused instruction. (Career-focused instruction is educational programming in which curriculum content and learning experiences clearly connect to the world of work.) For…

Investigating the Impact of Using a CAD Simulation Tool on Students' Learning of Design Thinking

NASA Astrophysics Data System (ADS)

Taleyarkhan, Manaz; Dasgupta, Chandan; Garcia, John Mendoza; Magana, Alejandra J.

2018-02-01

Engineering design thinking is hard to teach and still harder to learn by novices primarily due to the undetermined nature of engineering problems that often results in multiple solutions. In this paper, we investigate the effect of teaching engineering design thinking to freshmen students by using a computer-aided Design (CAD) simulation software. We present a framework for characterizing different levels of engineering design thinking displayed by students who interacted with the CAD simulation software in the context of a collaborative assignment. This framework describes the presence of four levels of engineering design thinking—beginning designer, adept beginning designer, informed designer, adept informed designer. We present the characteristics associated with each of these four levels as they pertain to four engineering design strategies that students pursued in this study—understanding the design challenge, building knowledge, weighing options and making tradeoffs, and reflecting on the process. Students demonstrated significant improvements in two strategies—understanding the design challenge and building knowledge. We discuss the affordances of the CAD simulation tool along with the learning environment that potentially helped students move towards Adept informed designers while pursuing these design strategies.

Defense Dollars and Sense: A Common Cause Guide to the Defense Budget Process.

ERIC Educational Resources Information Center

Rovner, Mark

Designed to increase public awareness of military spending, this 5-part guide examines the process and problems of preparing the national defense budget. The publication begins with a brief overview of the 1984 defense budget. Major military programs, trends in budgeting, and key concerns in budget formulation are explored. Graphs and charts…

From Instructional Systems Design to Managing the Life Cycle of Knowledge in Organizations

ERIC Educational Resources Information Center

Salisbury, Mark

2008-01-01

This article describes a framework for managing the life cycle of knowledge in organizations. The framework emerges from years of work with the laboratories and facilities that are under the direction of the U.S. Department of Energy (DOE). The article begins by describing the instructional systems design (ISD) process and how it is used to…

An Introduction to the Sexual Reproduction of Flowering Plants. Ornamental Horticulture I, Lesson Plan No. 5.

ERIC Educational Resources Information Center

Ideoka, Keith

Developed as part of a 90-hour high school course in ornamental horticulture, this 50-minute lesson plan is designed to explain the process of pollination and fertilization of flowering plants. The lesson plan begins with information on the course for which the lesson was designed; equipment and audio-visual aids needed; required student…

A Pest-Free Process

ERIC Educational Resources Information Center

Hallberg, Rosemary; Hurley, Janet

2009-01-01

Now that green building has become more popular, school facility directors and architects are beginning to make different choices during construction. These choices may involve energy-efficient lighting, window size, building materials and design elements. Often, though, what happens during construction has unexpected consequences--unwanted…

Beginning to manage drug discovery and development knowledge.

PubMed

Sumner-Smith, M

2001-05-01

Knowledge management approaches and technologies are beginning to be implemented by the pharmaceutical industry in support of new drug discovery and development processes aimed at greater efficiencies and effectiveness. This trend coincides with moves to reduce paper, coordinate larger teams with more diverse skills that are distributed around the globe, and to comply with regulatory requirements for electronic submissions and the associated maintenance of electronic records. Concurrently, the available technologies have implemented web-based architectures with a greater range of collaborative tools and personalization through portal approaches. However, successful application of knowledge management methods depends on effective cultural change management, as well as proper architectural design to match the organizational and work processes within a company.

Three-Dimensional Finite Element Ablative Thermal Response and Thermostructural Design of Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Dec, John A.; Braun, Robert D.

2011-01-01

A finite element ablation and thermal response program is presented for simulation of three-dimensional transient thermostructural analysis. The three-dimensional governing differential equations and finite element formulation are summarized. A novel probabilistic design methodology for thermal protection systems is presented. The design methodology is an eight step process beginning with a parameter sensitivity study and is followed by a deterministic analysis whereby an optimum design can determined. The design process concludes with a Monte Carlo simulation where the probabilities of exceeding design specifications are estimated. The design methodology is demonstrated by applying the methodology to the carbon phenolic compression pads of the Crew Exploration Vehicle. The maximum allowed values of bondline temperature and tensile stress are used as the design specifications in this study.

Optimization in the systems engineering process

NASA Technical Reports Server (NTRS)

Lemmerman, Loren A.

1993-01-01

The essential elements of the design process consist of the mission definition phase that provides the system requirements, the conceptual design, the preliminary design and finally the detailed design. Mission definition is performed largely by operations analysts in conjunction with the customer. The result of their study is handed off to the systems engineers for documentation as the systems requirements. The document that provides these requirements is the basis for the further design work of the design engineers at the Lockheed-Georgia Company. The design phase actually begins with conceptual design, which is generally conducted by a small group of engineers using multidisciplinary design programs. Because of the complexity of the design problem, the analyses are relatively simple and generally dependent on parametric analyses of the configuration. The result of this phase is a baseline configuration from which preliminary design may be initiated.

Economics In Optical Design, Analysis, And Production

NASA Astrophysics Data System (ADS)

Willey, Ronald R.

1983-10-01

There are indications that we are entering an era wherein economics will play an increasing role in the optical design and production process. Economics has always been a factor in the competition between commercial ventures in the product arena. Now, we may begin to see competition between different technologies for the scarce resources of the society, including money. A proper design approach begins with a thorough examination and refinement of the requirements from the top down. The interrelationships of the various components must be properly understood and balanced. The specifications must be clear, complete, and realistic. Improper or incomplete system design can cause an extensive waste of resources. The detail optical design to meet the performance requirements has sometimes been the only part of the process that the designer has considered his own responsibility. The final optimization should also consider economic related factors: the cost of tolerances, the available tools test plates, materials, and test equipment. In the preliminary design stage, he should have decided which alignment and test methods are most appropriate to the system. The distribution of tolerances in an optical/mechanical system is a frequently neglected opportunity to reduce cost. We have reported previously on our work in this area, and expand further on it in the context of this paper. The designer now has an opportunity to generate better designs at a lower cost that are more economical to produce. The watchword for the 1980's may become the one found in the assembly automation industry: "more, better, for less".

Aircraft Materials, Processes, Cleaning and Corrosion Control (Course Outline), Aviation Mechanics 1 (Power and Frame): 9073.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This document presents an outline for a 135-hour course designed to familiarize the beginning student with the basic concepts common to aircraft materials and processes, together with the requirements of proper cleaning and corrosion control as outlined by the Federal Aviation Agency. The aviation airframe and powerplant maintenance technician is…

Metrics Handbook (Air Force Systems Command)

NASA Astrophysics Data System (ADS)

1991-08-01

The handbook is designed to help one develop and use good metrics. It is intended to provide sufficient information to begin developing metrics for objectives, processes, and tasks, and to steer one toward appropriate actions based on the data one collects. It should be viewed as a road map to assist one in arriving at meaningful metrics and to assist in continuous process improvement.

The Relationship between Variations in Patterns of School Leadership and Group Problem-Solving Processes.

ERIC Educational Resources Information Center

Leithwood, Kenneth; Steinbach, Rosanne

Findings of a study that examined the relationship between variations in patterns of school leadership and group problem-solving process are presented in this paper. Interviews were conducted at the beginning and end of the school year with 12 principals in British Columbia who had implemented the Primary Program. The initiative was designed to…

Should I Stay or Should I Go? Women's Midcareer Decision Process

ERIC Educational Resources Information Center

Poole, Shelle A.

2012-01-01

This grounded theory study was designed to understand the process for midcareer women to stay or exit their career. Midcareer women are an understudied population and this study was meant to provide theory that will begin to fill the gap. The literature suggests that, historically, career development studies have been based on men's…

Experimental Designs in Sentence Processing Research: A Methodological Review and User's Guide

ERIC Educational Resources Information Center

Keating, Gregory D.; Jegerski, Jill

2015-01-01

Since the publication of Clahsen and Felser's (2006) keynote article on grammatical processing in language learners, the online study of sentence comprehension in adult second language (L2) learners has quickly grown into a vibrant and prolific subfield of SLA. As online methods begin to establish a foothold in SLA research, it is important…

A SURVEY OF LABORATORY AND STATISTICAL ISSUES RELATED TO FARMWORKER EXPOSURE STUDIES

EPA Science Inventory

Developing internally valid, and perhaps generalizable, farmworker exposure studies is a complex process that involves many statistical and laboratory considerations. Statistics are an integral component of each study beginning with the design stage and continuing to the final da...

Biomedical device innovation methodology: applications in biophotonics

NASA Astrophysics Data System (ADS)

Beswick, Daniel M.; Kaushik, Arjun; Beinart, Dylan; McGarry, Sarah; Yew, Ming Khoon; Kennedy, Brendan F.; Maria, Peter Luke Santa

2018-02-01

The process of medical device innovation involves an iterative method that focuses on designing innovative, device-oriented solutions that address unmet clinical needs. This process has been applied to the field of biophotonics with many notable successes. Device innovation begins with identifying an unmet clinical need and evaluating this need through a variety of lenses, including currently existing solutions for the need, stakeholders who are interested in the need, and the market that will support an innovative solution. Only once the clinical need is understood in detail can the invention process begin. The ideation phase often involves multiple levels of brainstorming and prototyping with the aim of addressing technical and clinical questions early and in a cost-efficient manner. Once potential solutions are found, they are tested against a number of known translational factors, including intellectual property, regulatory, and reimbursement landscapes. Only when the solution matches the clinical need, the next phase of building a "to market" strategy should begin. Most aspects of the innovation process can be conducted relatively quickly and without significant capital expense. This white paper focuses on key points of the medical device innovation method and how the field of biophotonics has been applied within this framework to generate clinical and commercial success.

Planning and Designing Facilities. Facility Design and Development--Part 1

ERIC Educational Resources Information Center

Hypes, Michael G.

2006-01-01

Before one begins the planning process for a new facility, it is important to determine if there is a need for a new facility. The demand for a new facility can be drawn from increases in the number of users, the type of users, and the type of events to be conducted in the facility. A feasibility study should be conducted to analyze the legal…

Rethinking the architectural design concept in the digital culture (in architecture's practice perspective)

NASA Astrophysics Data System (ADS)

Prawata, Albertus Galih

2017-11-01

The architectural design stages in architectural practices or in architectural design studio consist of many aspects. One of them is during the early phases of the design process, where the architects or designers try to interpret the project brief into the design concept. This paper is a report of the procedure of digital tools in the early design process in an architectural practice in Jakarta. It targets principally the use of BIM and digital modeling to generate information and transform them into conceptual forms, which is not very common in Indonesian architectural practices. Traditionally, the project brief is transformed into conceptual forms by using sketches, drawings, and physical model. The new method using digital tools shows that it is possible to do the same thing during the initial stage of the design process to create early architectural design forms. Architect's traditional tools and methods begin to be replaced effectively by digital tools, which would drive bigger opportunities for innovation.

76 FR 11433 - Federal Transition To Secure Hash Algorithm (SHA)-256

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... generating digital signatures. Current information systems, Web servers, applications and workstation operating systems were designed to process, and use SHA-1 generated signatures. National Institute of... cryptographic keys, and more robust algorithms by December 2013. Government systems may begin to encounter...

NASA Integrated Services Environment

NASA Technical Reports Server (NTRS)

Ing, Sharon

2005-01-01

This slide presentation will begin with a discussion on NASA's current distributed environment for directories, identity management and account management. We will follow with information concerning the drivers, design, reviews and implementation of the NISE Project. The final component of the presentation discusses processes used, status and conclusions.

Pilot scale system for the production of palm-based Monoester-OH

NASA Astrophysics Data System (ADS)

Ngah, Muhammad Syukri; Badri, Khairiah Haji

2016-11-01

A mechanically agitate reactor vessel in a moderate scale size of 500 L has been developed. This vessel was constructed to produce palm-based polyurethane polyol with a capacity of maximum 400 L. This is to accomodate the demand required for marketing trial run as part of the commercialization intention. The chemistry background of the process design was thoroughly studied. The esterification and condensation in batch process was maintained from the laboratory scale. Only RBD palm kernel oil was used in this study. This paper will describe the engineering design for the reactor vessel development beginning at the stoichiometric equations for the production process to the detail engineering including the equipment selection and fabrication in order to meet the design and objective specifications.

Regression analysis as a design optimization tool

NASA Technical Reports Server (NTRS)

Perley, R.

1984-01-01

The optimization concepts are described in relation to an overall design process as opposed to a detailed, part-design process where the requirements are firmly stated, the optimization criteria are well established, and a design is known to be feasible. The overall design process starts with the stated requirements. Some of the design criteria are derived directly from the requirements, but others are affected by the design concept. It is these design criteria that define the performance index, or objective function, that is to be minimized within some constraints. In general, there will be multiple objectives, some mutually exclusive, with no clear statement of their relative importance. The optimization loop that is given adjusts the design variables and analyzes the resulting design, in an iterative fashion, until the objective function is minimized within the constraints. This provides a solution, but it is only the beginning. In effect, the problem definition evolves as information is derived from the results. It becomes a learning process as we determine what the physics of the system can deliver in relation to the desirable system characteristics. As with any learning process, an interactive capability is a real attriubute for investigating the many alternatives that will be suggested as learning progresses.

Termination of School Employees: Legal Issues and Techniques.

ERIC Educational Resources Information Center

National School Boards Association, Alexandria, VA. Council of School Attorneys.

The termination of unsatisfactory school employees is an ubiquitous and often expensive legal problem for school districts. This monograph was designed to help school attorneys and administrators in handling the termination process as fairly and efficiently as possible. The monograph begins with articles on documentation, evaluation, and…

The Process of Designing Task Features

ERIC Educational Resources Information Center

Bauer, Malcolm

2014-01-01

Malcolm Bauer, from Education Testing Services, provides his comments on the Focus article in this issue of "Measurement" entitled : "How Task Features Impact Evidence from Assessments Embedded in Simulations and Games" (Russell G. Almond, Yoon Jeon Kim, Gertrudes Velasquez, Valerie J. Shute). Bauer begins his remarks by noting…

Proceedings of the Seminar on the DOD Computer Security Initiative (4th) Held at the National Bureau of Standards, Gaithersburg, Maryland on August 10-12, 1981.

DTIC Science & Technology

1981-01-01

comparison of formal and informal design methodologies will show how we think they are converging. Lastly, I will describe our involvement with the DoD...computer security must begin with the design methodology , with the objective being provability. The idea ofa formal evaluation and on-the-shelf... Methodologies ] Here we can compare the formal design methodologies with those used by informal practitioners like Control Data. Obviously, both processes

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

76 FR 52556 - Election To Expense Certain Refineries

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... the manufacture, construction, or production of self-constructed property must begin before January 1... is entered into prior to the manufacture, construction, or production of the property for use by the... refinery be designed to serve the primary purpose of processing liquid fuel from crude oil or qualified...

Designing the Regional College Management Information System.

ERIC Educational Resources Information Center

Kin Maung Kywe; And Others

Beginning in 1976, Regional Colleges were formed in Burma to implement career and technical education at the post-secondary level. This paper describes the Regional Colleges and explores the possible use of a systemic management information process that could assist in the complex planning required to develop second-year vocational and technical…

Authentic Leadership Development in the Classroom: A Narrative Approach

ERIC Educational Resources Information Center

Albert, Joseph F.; Vadla, Kaitlin

2009-01-01

This paper examines how a classroom designed process of constructing narratives about oneself, a group, and others helps students develop an authentic leadership voice. We begin by describing the theoretical framework behind our paper, which includes an overview of the notion of authenticity and the linkage between narrative and authentic…

Simulation tools for design of the next gseneration of milk processing plants

USDA-ARS?s Scientific Manuscript database

A growing number of food retailers have incorporated environmental sustainability into their business plans and are concerned about the greenhouse gas emissions (GHG) and the carbon footprint associated with the fluid milk value chain. The fluid milk value chain begins on the farm with crop product...

Technical Drafting and Mental Visualization in Interior Architecture Education

ERIC Educational Resources Information Center

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

Fundamentals of Refrigeration.

ERIC Educational Resources Information Center

Sutliff, Ronald D.; And Others

This self-study course is designed to familiarize Marine enlisted personnel with the principles of the refrigeration process. The course contains five study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the unit. The study units are divided into numbered work units, each…

MARA: Mathematics/Architecture Related Activities.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Curriculum Development.

This document is designed primarily to help teachers in elementary and middle schools to teach basic skills in mathematics, the visual arts, and social interaction. The Introduction contains sections titled: (1) How and Where to Begin; (2) Orientation Exercises; (3) Discovering the Environment; (4) Toothpicks and Gumdrops; (5) A Process for the…

SOS: Observation, Intervention, and Scaffolding towards Successful Online Students

ERIC Educational Resources Information Center

Ainsa, Trisha

2017-01-01

Research, reflection, and evaluation of online classes indicated a need for graduated scaffolding for first time students experiencing distance learning. In order to promote student engagement in the online learning process, I designed SOS for beginning online students. Sixty-three online students were offered an opportunity to participate in a…

Reflecting on the Use of Metaphor: Two Professors' Processes of Discovery

ERIC Educational Resources Information Center

Price, Christine G.; McGee, Christy D.

2009-01-01

This article summarizes the literature concerning the use of visual and textual metaphors and describes outcomes of a project designed to help teacher education candidates begin integrating their personal beliefs about teaching with their growing professional knowledge and emergent practice. By using metaphors, teacher educators have the…

Instructional Uses of Instant Messaging (IM) during Classroom Lectures

ERIC Educational Resources Information Center

Kinzie, Mable B.; Whitaker, Stephen D.; Hofer, Mark J.

2005-01-01

Can "Information Age" learners effectively multi-task in the classroom? Can synchronous classroom activities be designed around conceptually related tasks, to encourage deeper processing and greater learning of classroom content? This research was undertaken to begin to address these questions. In this study, we explored the use of…

Coral Reef Monitoring Needs Assessment Workshop U.S. Virgin Islands

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) and U.S. Virgin Island Department of Planning and Natural Resources (DPNR) held a workshop September 11-13, 2007 in St. Croix, U.S. Virgin Islands (USVI) to begin the process of designing a monitoring program that meets multiple mana...

Extending Organizational Contingency Theory to Team Performance - An Information Processing and Knowledge Flows Perspective

DTIC Science & Technology

2007-09-01

University Press. Yin, R.K. 2003. Case study research : Design and methods (3rd ed.). Thousand Oaks, CA: SAGE Publications. Yukl, G. 2001...Contingency theory has retained a central place in organization studies research for over half a century. Beginning with the seminal works by Burns and...particularly useful for research designs grounded in contingency theory (Schoonhoven 1981 p. 351; Gupta & Govindarajan 1984; Venkatraman 1989), and

Influencing physician prescribing.

PubMed

Segal, R; Wang, F

1999-10-01

The drug use process suffers from problems related to quality and cost that have not responded well to administrative or educational interventions. In many cases, attempts to improve the quality of physician prescribing have been clumsy, often based on intuition. This article begins by describing the drug use process and the role of prescribing in that process. In the following section, we describe what is known about how physicians make drug choice decisions. The paper concludes with suggestions, based on evidence, about the design of strategies for influencing prescribing.

Implementation of quality by design toward processing of food products.

PubMed

Rathore, Anurag S; Kapoor, Gautam

2017-05-28

Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

Guidelines of the Design of Electropyrotechnic Firing Circuit for Unmanned Flight and Ground Test Projects

NASA Technical Reports Server (NTRS)

Gonzalez, Guillermo A.; Lucy, Melvin H.; Massie, Jeffrey J.

2013-01-01

The NASA Langley Research Center, Engineering Directorate, Electronic System Branch, is responsible for providing pyrotechnic support capabilities to Langley Research Center unmanned flight and ground test projects. These capabilities include device selection, procurement, testing, problem solving, firing system design, fabrication and testing; ground support equipment design, fabrication and testing; checkout procedures and procedure?s training to pyro technicians. This technical memorandum will serve as a guideline for the design, fabrication and testing of electropyrotechnic firing systems. The guidelines will discuss the entire process beginning with requirements definition and ending with development and execution.

Self-Portrait Printmaking

ERIC Educational Resources Information Center

Dianis, Gina

2008-01-01

In the project described in this article, sixth-grade students use printmaking processes to design an art image of themselves accompanied by a reflective poem. The lesson begins with a discussion of self-portraits by famous artists, inviting questions such as "What visual clues does the artist present to the viewer?" and "How has the artist placed…

Learning To Learn: A Guide to Becoming Information Literate.

ERIC Educational Resources Information Center

Riedling, Ann Marlow

This guide is designed to help students from middle school through the beginning college level master the essential information literacy skills and become effective, efficient learners. It covers the entire process of the research experience from choosing a topic and learning how to explore it effectively, to using the library and its resources,…

The Water Turbine: An Integrative STEM Education Context

ERIC Educational Resources Information Center

Grubbs, Michael E.; Deck, Anita

2015-01-01

Water turbines have long been used to make work easier for humans while minimizing energy consumption. They are not only used in small- and large-scale operations, but also provide a great context for Integrative STEM education. Students can begin to understand the technological processes available by designing, building, and testing different…

Speed Bumps: A Student-Friendly Guide to Qualitative Research.

ERIC Educational Resources Information Center

Weis, Lois; Fine, Michelle

This book is designed to help undergraduate and graduate students begin a discussion about the technicalities, politics, and ethics surrounding qualitative research, focusing on research in the interest of social justice. It offers a view of how two researchers have conceptualized their own research process and renders problematic many of the…

Contribution of large-scale forest inventories to biodiversity assessment and monitoring

Treesearch

Piermaria Corona; Gherardo Chirici; Ronald E. McRoberts; Susanne Winter; Anna Barbati

2011-01-01

Statistically-designed inventories and biodiversity monitoring programs are gaining relevance for biological conservation and natural resources management. Mandated periodic surveys provide unique opportunities to identify and satisfy natural resources management information needs. However, this is not an end in itself but rather is the beginning of a process that...

Teaching Reading to the Disadvantaged Adult.

ERIC Educational Resources Information Center

Dinnan, James A.; Ulmer, Curtis, Ed.

This manual is designed to assess the background of the individual and to bring him to the stage of unlocking the symbolic codes called Reading and Mathematics. The manual begins with Introduction to a Symbolic Code (The Thinking Process and The Key to Learning Basis), and continues with Basic Reading Skills (Readiness, Visual Discrimination,…

Exploring Work: Fun Activities for Girls.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA. Women's Educational Equity Act Dissemination Center.

This document contains learning activities to help middle school girls begin the career planning process and resist gender-role stereotyping. The activities are designed for individuals and/or groups of girls either in classroom settings or in organizations such as Girl Scouts and 4-H Clubs. A total of 30 activities are organized into 4 sections…

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

Budgeting: The Basics and Beyond. Learn at Home.

ERIC Educational Resources Information Center

Prochaska-Cue, Kathy; Sugden, Marilyn

Designed as an at-home course to help users develop a realistic budget plan and set up a workable record-keeping system, these course materials provide practical tips, ideas, and suggestions for budgeting. The course begins with a nine-step budgeting process which emphasizes communicating among family members, considering personal or family…

Teaching Freshmen To Understand Research as a Process of Inquiry.

ERIC Educational Resources Information Center

Tracey, Karen

Freshmen often approach research papers by selecting a "giant topic" and going to the library to confront swamps and mountains of resources. A different approach to teaching research is designed to help students begin to shift the often counter-productive paradigm under which they operate. The classroom strategy proposed is 3-fold.…

Writing for Beginning Readers.

ERIC Educational Resources Information Center

Hawkins, Carria

This guide contains 15 units designed to help adult basic education or literacy education students write materials used in everyday life. The first section of the guide contains an introduction to the writing/teaching process and suggestions for teachers. The 15 units that follow serve as a workbook for students. They cover the following topics:…

Middle Level Leadership Handbook. National Leadership Camp Curriculum--Adviser's Guide.

ERIC Educational Resources Information Center

Jensen, Jacquie; And Others

This guide, designed to accompany the "Middle Level Leadership Handbook" student guide, is helpful in assisting student advisers in building student leaders and overseeing student organizations. The guide begins with a section on leadership that covers how to process a learning experience, organize beliefs, and form ideas on leadership.…

A Story About You.

ERIC Educational Resources Information Center

Southard, Helen

This pamphlet describes the process of human growth from conception to adolescence and is designed for use in grades four through six. Chapter One discusses growth and Chapter Two discusses the beginning of life. Chapter Three is concerned with growth from conception on to birth. The birth of the babies, both human and other mammals, and helping…

NASA gear research and its probable effect on rotorcraft transmission design

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Townsend, D. P.; Coy, J. J.

1979-01-01

The NASA Lewis Research Center devised a comprehensive gear technology research program beginning in 1969, the results of which are being integrated into the NASA civilian Helicopter Transmission System Technology Program. Attention is given to the results of this gear research and those programs which are presently being undertaken. In addition, research programs studying pitting fatigue, gear steels and processing, life prediction methods, gear design and dynamics, elastohydrodynamic lubrication, lubrication methods and gear noise are presented. Finally, the impact of advanced gear research technology on rotorcraft transmission design is discussed.

Procurement of Architectural and Engineering Services for Sustainable Buildings: A Guide for Federal Project Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2004-06-01

This guide was prepared to be a resource for federal construction project managers and others who want to integrate the principles of sustainable design into the procurement of professional building design and consulting services. To economize on energy costs and improve the safety, comfort, and health of building occupants, building design teams can incorporate daylighting, energy efficiency, renewable energy, and passive solar design into all projects in which these elements are technically and economically feasible. The information presented here will help project leaders begin the process and manage the inclusion of sustainable design in the procurement process. The section onmore » establishing selection criteria contains key elements to consider before selecting an architectural and engineering (A/E) firm. The section on preparing the statement of work discusses the broad spectrum of sustainable design services that an A/E firm can provide. Several helpful checklists are included.« less

Best Fed Beginnings: A Nationwide Quality Improvement Initiative to Increase Breastfeeding.

PubMed

Feldman-Winter, Lori; Ustianov, Jennifer; Anastasio, Julius; Butts-Dion, Sue; Heinrich, Patricia; Merewood, Anne; Bugg, Kimarie; Donohue-Rolfe, Sarah; Homer, Charles J

2017-07-01

In response to a low number of Baby-Friendly-designated hospitals in the United States, the Centers for Disease Control and Prevention funded the National Institute for Children's Health Quality to conduct a national quality improvement initiative between 2011 and 2015. The initiative was entitled Best Fed Beginnings and enrolled 90 hospitals in a nationwide initiative to increase breastfeeding and achieve Baby-Friendly designation. The intervention period lasted from July 2012 to August 2014. During that period, data on process indicators aligned with the Ten Steps to Successful Breastfeeding and outcome measures (overall and exclusively related to breastfeeding) were collected. In addition, data on the Baby-Friendly designation were collected after the end of the intervention through April 2016. Hospitals assembled multidisciplinary teams that included parent partners and community representatives. Three in-person learning sessions were interspersed with remote learning and tests of change, and a Web-based platform housed resources and data for widespread sharing. By April 2016, a total of 72 (80%) of the 90 hospitals received the Baby-Friendly designation, nearly doubling the number of designated hospitals in the United States. Participation in the Best Fed Beginnings initiative had significantly high correlation with designation compared with hospital applicants not in the program (Pearson's r [235]: 0.80; P < .01). Overall breastfeeding increased from 79% to 83% ( t = 1.93; P = .057), and exclusive breastfeeding increased from 39% to 61% ( t = 9.72; P < .001). A nationwide initiative of maternity care hospitals accomplished rapid transformative changes to achieve Baby-Friendly designation. These changes were accompanied by a significant increase in exclusive breastfeeding. Copyright © 2017 by the American Academy of Pediatrics.

Schematic driven silicon photonics design

NASA Astrophysics Data System (ADS)

Chrostowski, Lukas; Lu, Zeqin; Flückiger, Jonas; Pond, James; Klein, Jackson; Wang, Xu; Li, Sarah; Tai, Wei; Hsu, En Yao; Kim, Chan; Ferguson, John; Cone, Chris

2016-03-01

Electronic circuit designers commonly start their design process with a schematic, namely an abstract representation of the physical circuit. In integrated photonics on the other hand, it is very common for the design to begin at the physical component level. In order to build large integrated photonic systems, it is crucial to design using a schematic-driven approach. This includes simulations based on schematics, schematic-driven layout, layout versus schematic verification, and post-layout simulations. This paper describes such a design framework implemented using Mentor Graphics and Lumerical Solutions design tools. In addition, we describe challenges in silicon photonics related to manufacturing, and how these can be taken into account in simulations and how these impact circuit performance.

Using Storyboarding Techniques to Identify Design Opportunities: When Students Employ Storyboards, They Are Better Able to Understand the Complexity of a Products's Use and Visualize Areas for Improvement

ERIC Educational Resources Information Center

Reeder, Kevin

2005-01-01

The movie industry heavily relies on storyboards as an effective way to visually describe the process of a movie. The storyboard visually describes how the movie flows from beginning to end, how the characters are interacting, and where transitions and/or gaps exist in the storyline. The storyboard is an effective tool in industrial design as…

Cognitive search model and a new query paradigm

NASA Astrophysics Data System (ADS)

Xu, Zhonghui

2001-06-01

This paper proposes a cognitive model in which people begin to search pictures by using semantic content and find a right picture by judging whether its visual content is a proper visualization of the semantics desired. It is essential that human search is not just a process of matching computation on visual feature but rather a process of visualization of the semantic content known. For people to search electronic images in the way as they manually do in the model, we suggest that querying be a semantic-driven process like design. A query-by-design paradigm is prosed in the sense that what you design is what you find. Unlike query-by-example, query-by-design allows users to specify the semantic content through an iterative and incremental interaction process so that a retrieval can start with association and identification of the given semantic content and get refined while further visual cues are available. An experimental image retrieval system, Kuafu, has been under development using the query-by-design paradigm and an iconic language is adopted.

Flexible processing and the design of grammar.

PubMed

Sag, Ivan A; Wasow, Thomas

2015-02-01

We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This "sign-based" conception of grammar has provided precise solutions to the key problems long thought to motivate movement-based analyses, has supported three decades of computational research developing large-scale grammar implementations, and is now beginning to play a role in computational psycholinguistics research that explores the use of underspecification in the incremental computation of partial meanings.

25 CFR 170.935 - How does a direct service tribe begin the alternative dispute resolution process?

Code of Federal Regulations, 2010 CFR

2010-04-01

....935 How does a direct service tribe begin the alternative dispute resolution process? (a) To begin the ADR process, a direct service tribe must write to the BIA Regional Director or the Chief of BIA... 25 Indians 1 2010-04-01 2010-04-01 false How does a direct service tribe begin the alternative...

The Design Manager's Aid for Intelligent Decomposition (DeMAID)

NASA Technical Reports Server (NTRS)

Rogers, James L.

1994-01-01

Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

VANDENBERG AIR FORCE BASE, CALIF. - The SciSat-1 payload, with fairing installed and attached to its Pegasus launch vehicle, begins rollout to the hot pad and mating to the L-1011 carrier aircraft. The SciSat-1 weighs approximately 330 pounds and after launch will be placed in a 400-mile-high polar orbit to investigate processes that control the distribution of ozone in the upper atmosphere. The data from the satellite will provide Canadian and international scientists with improved measurements relating to global ozone processes and help policymakers assess existing environmental policy and develop protective measures for improving the health of our atmosphere, preventing further ozone depletion. The mission is designed to last two years.

NASA Image and Video Library

2003-08-09

VANDENBERG AIR FORCE BASE, CALIF. - The SciSat-1 payload, with fairing installed and attached to its Pegasus launch vehicle, begins rollout to the hot pad and mating to the L-1011 carrier aircraft. The SciSat-1 weighs approximately 330 pounds and after launch will be placed in a 400-mile-high polar orbit to investigate processes that control the distribution of ozone in the upper atmosphere. The data from the satellite will provide Canadian and international scientists with improved measurements relating to global ozone processes and help policymakers assess existing environmental policy and develop protective measures for improving the health of our atmosphere, preventing further ozone depletion. The mission is designed to last two years.

Importance of joint efforts for balanced process of designing and education

NASA Astrophysics Data System (ADS)

Mayorova, V. I.; Bannova, O. K.; Kristiansen, T.-H.; Igritsky, V. A.

2015-06-01

This paper discusses importance of a strategic planning and design process when developing long-term space exploration missions both robotic and manned. The discussion begins with reviewing current and/or traditional international perspectives on space development at the American, Russian and European space agencies. Some analogies and comparisons will be drawn upon analysis of several international student collaborative programs: Summer International workshops at the Bauman Moscow State Technical University, International European Summer Space School "Future Space Technologies and Experiments in Space", Summer school at Stuttgart University in Germany. The paper will focus on discussion about optimization of design and planning processes for successful space exploration missions and will highlight importance of the following: understanding connectivity between different levels of human being and machinery; simultaneous mission planning approach; reflections and correlations between disciplines involved in planning and executing space exploration missions; knowledge gained from different disciplines and through cross-applying and re-applying design approaches between variable space related fields of study and research. The conclusions will summarize benefits and complications of applying balanced design approach at all levels of the design process. Analysis of successes and failures of organizational efforts in space endeavors is used as a methodological approach to identify key questions to be researched as they often cause many planning and design processing problems.

75 FR 64737 - Automated Commercial Environment (ACE): Announcement of a National Customs Automation Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... Commissioner of CBP with authority to conduct limited test programs or procedures designed to evaluate planned.... Specifically, CBP is looking for test participants to include: 2-3 Ocean Carriers. At least one must be filing... their software ready to test with CBP once CBP begins the certification process. CBP will post the...

Diagnostic Tools for the Systemic Reform of Schools.

ERIC Educational Resources Information Center

Amsler, Mary; Kirsch, Kayla

This paper presents three interrelated diagnostic tools that can be used by school staff as they begin to plan a systemic reform effort. These tools are designed to help educators reflect on their experiences in creating changes in their school and to examine the current barriers to and supports for the change process. The tools help school design…

Method for Studying a Human Ecology: An Adaptation of the Grounded Theory Tradition.

ERIC Educational Resources Information Center

McCaslin, Mark L.; Scott, Karen Wilson

Constructivist grounded theory is focused on discovery through understanding data in a human ecology. The procedures outlined in this paper are designed to guide the beginning theorist through the process of creating a theory grounded in data that is a product of the human ecology under study. These new procedures extend grounded theory, providing…

Mediacion en educacion especial: Una guia para los padres (Special Education Mediation: A Guide for Parents).

ERIC Educational Resources Information Center

Consortium for Appropriate Dispute Resolution in Special Education (CADRE), Eugene, OR.

Designed for Spanish-speaking parents of students with disabilities living in Oregon, this brochure describes the general mediation process that parents can use to resolve special education services disputes with schools. It begins by discussing what mediation is and the characteristics of a trained mediator. It addresses the requirement for…

The Creation and Implementation of a Dream: Lessons Learned from a Unique Case Study

ERIC Educational Resources Information Center

Wheat, Kevin

2017-01-01

Many educational leaders dream of the opportunity to begin a new school. New schools provide opportunities for innovation, change, and creativity, which most educators believe is needed to improve current middle school practice. This study follows the process of planning for and opening a new and innovative middle school program designed to offer…

The Deficit and the Federal Budget. 1983 National Issues Forum.

ERIC Educational Resources Information Center

Melville, Keith, Ed.

Although designed for participants in the National Issues Forum, this booklet, which describes the impact of the federal deficit and the federal budget process, is also useful for secondary school social studies. The six sections begin with an introduction describing why the deficit grows yearly and why it is difficult for Congress to stop its…

The Apollo Expericence Lessons Learned for Constellation Lunar Dust Management

NASA Astrophysics Data System (ADS)

Wagner, Sandra

2006-09-01

Lunar dust will present significant challenges to NASA's Lunar Exploration Missions. The challenges can be overcome by using best practices in system engineering design. For successful lunar surface missions, all systems that come into contact with lunar dust must consider the effects throughout the entire design process. Interfaces between all these systems with other systems also must be considered. Incorporating dust management into Concept of Operations and Requirements development are the best place to begin to mitigate the risks presented by lunar dust. However, that is only the beginning. To be successful, every person who works on NASA's Constellation lunar missions must be mindful of this problem. Success will also require fiscal responsibility. NASA must learn from Apollo the root cause of problems caused by dust, and then find the most cost-effective solutions to address each challenge. This will require a combination of common sense existing technologies and promising, innovative technical solutions

The Apollo Experience Lessons Learned for Constellation Lunar Dust Management

NASA Technical Reports Server (NTRS)

Wagner, Sandra

2006-01-01

Lunar dust will present significant challenges to NASA's Lunar Exploration Missions. The challenges can be overcome by using best practices in system engineering design. For successful lunar surface missions, all systems that come into contact with lunar dust must consider the effects throughout the entire design process. Interfaces between all these systems with other systems also must be considered. Incorporating dust management into Concept of Operations and Requirements development are the best place to begin to mitigate the risks presented by lunar dust. However, that is only the beginning. To be successful, every person who works on NASA's Constellation lunar missions must be mindful of this problem. Success will also require fiscal responsibility. NASA must learn from Apollo the root cause of problems caused by dust, and then find the most cost-effective solutions to address each challenge. This will require a combination of common sense existing technologies and promising, innovative technical solutions

Coal gasification systems engineering and analysis. Appendix B: Medium B+U gas design

NASA Technical Reports Server (NTRS)

1980-01-01

A four module, 20,000 TPD, based on KT coal gasification technology was designed. The plant processes Kentucky No. 9 coal with provisions for up to five percent North Alabama coal. Medium BTU gas with heat content of 305 BTU/SCF and not more than 200 ppm sulfur is the primary plant product. Sulfur is recovered for scale as prilled sulfur. Ash disposal is on site. The plant is designed for zero water discharge. Trade studies provided the basis for not using boiler produced steam to drive prime movers. Thus process derived steam in excess of process requirements in superheated for power use in prime movers. Electricity from the TVA grid is used to supply the balance of the plant prime mover power requirements. A study of the effect of mine mouth coal cleaning showed that coal cleaning is not an economically preferred route. The design procedure involved defining available processes to meet the requirements of each system, technical/economic trade studies to select the preferred processes, and engineering design and flow sheet development for each module. Cost studies assumed a staggered construction schedule for the four modules beginning spring 1981 and a 90% on stream factor.

Engaging Undergraduate Education Majors in the Practice of Astronomy through a Coherent Science Content Storyline Course

NASA Astrophysics Data System (ADS)

Plummer, Julia; Palma, Christopher

2015-08-01

For the next generation of students to learn astronomy as both a body of knowledge and a process of continually extending, refining, and revising that knowledge, teachers at all levels must learn how to engage their students in the practices of astronomy. This begins by designing science coursework for undergraduate education majors in ways that reflect how we hope they will teach their own future students. We have designed an undergraduate astronomy course for elementary education majors around a coherent science content storyline (CSCS) framework in order to investigate methods that support education majors’ uptake of astronomy practices. CSCS instruction purposefully sequences lessons in ways that make explicit the connections between science ideas in order to move students towards increasingly sophisticated explanations for a single big idea in science. We used this framework to organize our course around a series of astronomical investigations that build towards a big idea in astronomy: how the formation model explains current patterns observed in the Solar System. Each investigation helps students begin to explain observations of the Solar System from a coherent, systems-based perspective as they make choices on how to design their own data collection and analysis strategies. Through these investigations, future teachers begin to view astronomy as a process of answering scientific questions using evidence-based explanations and model-based reasoning. The course design builds on our prior research into students’ ideas about Solar System phenomena and its formation as well as students’ ideas about how astronomers carry out investigations. Preliminary results, based on analysis of student conversations during in-class investigations, science notebook entries, and scientific reports, suggest that the course helps students learn to construct evidence-based explanations while also increasing the accuracy of the explanations for astronomical phenomena. We will discuss implications for undergraduate astronomy education towards increasing future teachers’ proficiency in doing astronomy in ways that move them towards understanding how astronomers investigate the universe.

Integrating information literacy into an online undergraduate nursing informatics course: the librarian's role in the design and teaching of the course.

PubMed

Schulte, Stephanie J

2008-01-01

Integration of information literacy as a core component into a new online undergraduate nursing course proved to be a learning experience in course design and teaching. This article describes the framework for the course design that combined cultural competency, informatics, and information literacy and was grounded in informatics competencies for nurses at the beginning level, an informatics textbook, and the Neurnan Systems Model. The librarian's role in this process and the information literacy unit's content and written assignment are detailed, and challenges in the collaboration are also addressed.

Topology optimization and laser additive manufacturing in design process of efficiency lightweight aerospace parts

NASA Astrophysics Data System (ADS)

Fetisov, K. V.; Maksimov, P. V.

2018-05-01

The paper presents the application of topology optimization and laser additive manufacturing in the design of lightweight aerospace parts. At the beginning a brief overview of the topology optimization algorithm SIMP is given, one of the most commonly used algorithm in FEA software. After that, methodology of parts design with using topology optimization is discussed as well as issues related to designing for additive manufacturing. In conclusion, the practical application of the proposed methodologies is presented using the example of one complex assembly unit. As a result of the new design approach, the mass of product was reduced five times, and twenty parts were replaced by one.

Transition of a Three-Dimensional Unsteady Viscous Flow Analysis from a Research Environment to the Design Environment

NASA Technical Reports Server (NTRS)

Dorney, Suzanne; Dorney, Daniel J.; Huber, Frank; Sheffler, David A.; Turner, James E. (Technical Monitor)

2001-01-01

The advent of advanced computer architectures and parallel computing have led to a revolutionary change in the design process for turbomachinery components. Two- and three-dimensional steady-state computational flow procedures are now routinely used in the early stages of design. Unsteady flow analyses, however, are just beginning to be incorporated into design systems. This paper outlines the transition of a three-dimensional unsteady viscous flow analysis from the research environment into the design environment. The test case used to demonstrate the analysis is the full turbine system (high-pressure turbine, inter-turbine duct and low-pressure turbine) from an advanced turboprop engine.

Applicability and Limitations of Reliability Allocation Methods

NASA Technical Reports Server (NTRS)

Cruz, Jose A.

2016-01-01

Reliability allocation process may be described as the process of assigning reliability requirements to individual components within a system to attain the specified system reliability. For large systems, the allocation process is often performed at different stages of system design. The allocation process often begins at the conceptual stage. As the system design develops, more information about components and the operating environment becomes available, different allocation methods can be considered. Reliability allocation methods are usually divided into two categories: weighting factors and optimal reliability allocation. When properly applied, these methods can produce reasonable approximations. Reliability allocation techniques have limitations and implied assumptions that need to be understood by system engineers. Applying reliability allocation techniques without understanding their limitations and assumptions can produce unrealistic results. This report addresses weighting factors, optimal reliability allocation techniques, and identifies the applicability and limitations of each reliability allocation technique.

SEPAC software configuration control plan and procedures, revision 1

NASA Technical Reports Server (NTRS)

1981-01-01

SEPAC Software Configuration Control Plan and Procedures are presented. The objective of the software configuration control is to establish the process for maintaining configuration control of the SEPAC software beginning with the baselining of SEPAC Flight Software Version 1 and encompass the integration and verification tests through Spacelab Level IV Integration. They are designed to provide a simplified but complete configuration control process. The intent is to require a minimum amount of paperwork but provide total traceability of SEPAC software.

Creating Your Life's Work Portfolio. An Interactive Career and Life Planning Workbook.

ERIC Educational Resources Information Center

1998

Designed for those beginning a working life or with years of experience, this book leads the user through collecting records that document work history and affirm successes. It provides a step-by-step process to help plan one's life's work, make career decisions, and develop plans for new career directions and a structure to learn career planning…

Reference and Information Services: An Introduction. Third Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Bopp, Richard E., Ed.; Smith, Linda C., Ed.

Like the first two editions, this third edition is designed primarily to provide the beginning student of library and information science with an overview both of the concepts and processes behind today's reference services and of the most important sources consulted in answering common types of reference questions. The first 12 chapters deal with…

Education Stimulus Funds: An Opportunity to Plan Ahead

ERIC Educational Resources Information Center

Shakrani, Sharif

2009-01-01

Designed to stimulate the economy and employment, the "American Recovery and Reinvestment Act of 2009" (ARRA), commonly referred to as the stimulus package or plan, is a crucial step in a massive effort to create and save 3 to 4 million jobs, jump-start the U.S. economy and begin the process of transforming the economy for the 21st…

Review of Web-Based Technical Documentation Processes. FY07 NAEP-QA Special Study Report. TR-08-17

ERIC Educational Resources Information Center

Gribben, Monica; Wise, Lauress; Becker, D. E.

2008-01-01

Beginning with the 2000 and 2001 National Assessment of Educational Progress (NAEP) assessments, the National Center for Education Statistics (NCES) has made technical documentation available on the worldwide web at http://nces.ed.gov/nationsreportcard/tdw/. The web-based documentation is designed to be less dense and more accessible than prior…

Virtual design and construction of plumbing systems

NASA Astrophysics Data System (ADS)

Filho, João Bosco P. Dantas; Angelim, Bruno Maciel; Guedes, Joana Pimentel; de Castro, Marcelo Augusto Farias; Neto, José de Paula Barros

2016-12-01

Traditionally, the design coordination process is carried out by overlaying and comparing 2D drawings made by different project participants. Detecting information errors from a composite drawing is especially challenging and error prone. This procedure usually leaves many design errors undetected until construction begins, and typically lead to rework. Correcting conflict issues, which were not identified during design and coordination phase, reduces the overall productivity for everyone involved in the construction process. The identification of construction issues in the field generate Request for Information (RFIs) that is one of delays causes. The application of Virtual Design and Construction (VDC) tools to the coordination processes can bring significant value to architecture, structure, and mechanical, electrical, and plumbing (MEP) designs in terms of a reduced number of errors undetected and requests for information. This paper is focused on evaluating requests for information (RFI) associated with water/sanitary facilities of a BIM model. Thus, it is expected to add improvements of water/sanitary facility designs, as well as to assist the virtual construction team to notice and identify design problems. This is an exploratory and descriptive research. A qualitative methodology is used. This study adopts RFI's classification in six analyzed categories: correction, omission, validation of information, modification, divergence of information and verification. The results demonstrate VDC's contribution improving the plumbing system designs. Recommendations are suggested to identify and avoid these RFI types in plumbing system design process or during virtual construction.

The aerospace plane design challenge: Credible computational fluid dynamics results

NASA Technical Reports Server (NTRS)

Mehta, Unmeel B.

1990-01-01

Computational fluid dynamics (CFD) is necessary in the design processes of all current aerospace plane programs. Single-stage-to-orbit (STTO) aerospace planes with air-breathing supersonic combustion are going to be largely designed by means of CFD. The challenge of the aerospace plane design is to provide credible CFD results to work from, to assess the risk associated with the use of those results, and to certify CFD codes that produce credible results. To establish the credibility of CFD results used in design, the following topics are discussed: CFD validation vis-a-vis measurable fluid dynamics (MFD) validation; responsibility for credibility; credibility requirement; and a guide for establishing credibility. Quantification of CFD uncertainties helps to assess success risk and safety risks, and the development of CFD as a design tool requires code certification. This challenge is managed by designing the designers to use CFD effectively, by ensuring quality control, and by balancing the design process. For designing the designers, the following topics are discussed: how CFD design technology is developed; the reasons Japanese companies, by and large, produce goods of higher quality than the U.S. counterparts; teamwork as a new way of doing business; and how ideas, quality, and teaming can be brought together. Quality control for reducing the loss imparted to the society begins with the quality of the CFD results used in the design process, and balancing the design process means using a judicious balance of CFD and MFD.

30 CFR 70.208 - Bimonthly sampling; designated areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... each designated area on a production shift during each bimonthly period beginning with the bimonthly... dust sampling of designated areas shall begin on the first production shift during the next bimonthly... on which there is a production shift following the day of receipt of notification. (d) Upon issuance...

30 CFR 70.208 - Bimonthly sampling; designated areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... each designated area on a production shift during each bimonthly period beginning with the bimonthly... dust sampling of designated areas shall begin on the first production shift during the next bimonthly... on which there is a production shift following the day of receipt of notification. (d) Upon issuance...

30 CFR 70.208 - Bimonthly sampling; designated areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... each designated area on a production shift during each bimonthly period beginning with the bimonthly... dust sampling of designated areas shall begin on the first production shift during the next bimonthly... on which there is a production shift following the day of receipt of notification. (d) Upon issuance...

Adventures in Private Cloud: Balancing Cost and Capability at the CloudSat Data Processing Center

NASA Astrophysics Data System (ADS)

Partain, P.; Finley, S.; Fluke, J.; Haynes, J. M.; Cronk, H. Q.; Miller, S. D.

2016-12-01

Since the beginning of the CloudSat Mission in 2006, The CloudSat Data Processing Center (DPC) at the Cooperative Institute for Research in the Atmosphere (CIRA) has been ingesting data from the satellite and other A-Train sensors, producing data products, and distributing them to researchers around the world. The computing infrastructure was specifically designed to fulfill the requirements as specified at the beginning of what nominally was a two-year mission. The environment consisted of servers dedicated to specific processing tasks in a rigid workflow to generate the required products. To the benefit of science and with credit to the mission engineers, CloudSat has lasted well beyond its planned lifetime and is still collecting data ten years later. Over that period requirements of the data processing system have greatly expanded and opportunities for providing value-added services have presented themselves. But while demands on the system have increased, the initial design allowed for very little expansion in terms of scalability and flexibility. The design did change to include virtual machine processing nodes and distributed workflows but infrastructure management was still a time consuming task when system modification was required to run new tests or implement new processes. To address the scalability, flexibility, and manageability of the system Cloud computing methods and technologies are now being employed. The use of a public cloud like Amazon Elastic Compute Cloud or Google Compute Engine was considered but, among other issues, data transfer and storage cost becomes a problem especially when demand fluctuates as a result of reprocessing and the introduction of new products and services. Instead, the existing system was converted to an on premises private Cloud using the OpenStack computing platform and Ceph software defined storage to reap the benefits of the Cloud computing paradigm. This work details the decisions that were made, the benefits that have been realized, the difficulties that were encountered and issues that still exist.

Design Process of Flight Vehicle Structures for a Common Bulkhead and an MPCV Spacecraft Adapter

NASA Technical Reports Server (NTRS)

Aggarwal, Pravin; Hull, Patrick V.

2015-01-01

Design and manufacturing space flight vehicle structures is a skillset that has grown considerably at NASA during that last several years. Beginning with the Ares program and followed by the Space Launch System (SLS); in-house designs were produced for both the Upper Stage and the SLS Multipurpose crew vehicle (MPCV) spacecraft adapter. Specifically, critical design review (CDR) level analysis and flight production drawing were produced for the above mentioned hardware. In particular, the experience of this in-house design work led to increased manufacturing infrastructure for both Marshal Space Flight Center (MSFC) and Michoud Assembly Facility (MAF), improved skillsets in both analysis and design, and hands on experience in building and testing (MSA) full scale hardware. The hardware design and development processes from initiation to CDR and finally flight; resulted in many challenges and experiences that produced valuable lessons. This paper builds on these experiences of NASA in recent years on designing and fabricating flight hardware and examines the design/development processes used, as well as the challenges and lessons learned, i.e. from the initial design, loads estimation and mass constraints to structural optimization/affordability to release of production drawing to hardware manufacturing. While there are many documented design processes which a design engineer can follow, these unique experiences can offer insight into designing hardware in current program environments and present solutions to many of the challenges experienced by the engineering team.

Project Copernicus: An Earth observing system

NASA Technical Reports Server (NTRS)

1991-01-01

Hunsaker Aerospace Corporation is presenting this proposal for Project Copernicus to fulfill the need for space-based remote sensing of Earth. Concentration is on data acquisition. Copernicus is designed to be a flexible system of spacecraft in a low near-polar orbit. The goal is to acquire data so that the scientists may begin to understand many Earth processes and interactions. The mission objective of Copernicus is to provide a space-based, remote-sensing measurement data acquisition and transfer system for 15 years. A description of the design project is presented.

Engineering specification and system design for CAD/CAM of custom shoes: UMC project effort

NASA Technical Reports Server (NTRS)

Bao, Han P.

1991-01-01

The goal of this project is to supplement the footwear design system of North Carolina State University (NCSU) with a software module to design and manufacture a combination sole. The four areas of concentration were: customization of NASCAD (NASA Computer Aided Design) to the footwear project; use of CENCIT data; computer aided manufacturing activities; and beginning work for the bottom elements of shoes. The task of generating a software module for producing a sole was completed with a demonstrated product realization. The software written in C was delivered to NCSU for inclusion in their design system for custom footwear known as LASTMOD. The machining process of the shoe last was improved using a spiral tool path approach.

Low Pressure Greenhouse Concepts for Mars

NASA Technical Reports Server (NTRS)

Fowler, Philip A.; Wheeler, Raymond M.; Bucklin, Ray A.; Corey, Kenneth A.

2000-01-01

A project was initiated to begin testing some environmental limits for managing plant growth systems. These limits will help determine some of the concepts for building plant enclosures for use on Mars. In particular, this study focuses on the effects of reduced atmospheric pressures. Structural design is considered as it relates to the biological processes that would occur within that structure. The design must be closely tied to the functionality of the biological system and has a few primary concerns that need to be tested to resolve the question as to the path of the design. Early tests indicate that plants can survive and grow at low (greater than 76 mb) pressure.

Using Digital Learning Objects to Introduce Students to the Nature of Models and the Nature of Matter

ERIC Educational Resources Information Center

Gustafson, Brenda; Mahaffy, Peter; Martin, Brian

2011-01-01

This article reports a subset of findings from a larger study centered on designing a series of six digital learning objects to help Grade 5 (age 10-12) students begin to consider the nature of models (understood as the physical or mental representation of objects, phenomena, or processes), the particle nature of matter, and the behavior of…

Examining the Training Process of a New Teacher Educator in the Field of the Education of the Hearing Impaired

ERIC Educational Resources Information Center

Gurgur, Hasan

2012-01-01

Training of beginning teacher educators has become a popular topic in the literature. This study aimed to investigate the training procedures of a new teacher educator who would be working in the division of the hearing impaired. The study was designed as action research and a new teacher educator, an experienced teacher educator and an academic…

Activating the Meaning of a Word Facilitates the Integration of Orthography: Evidence from Spelling Exercises in Beginning Spellers

ERIC Educational Resources Information Center

Hilte, Maartje; Reitsma, Pieter

2011-01-01

The present study examines the effect of activating the connection between meaning and phonology in spelling exercises in second-grade spellers (n=41; 8 years and 3 months). In computer-based exercises in a within-subject design, semantic and neutral descriptions were contrasted and provided either before the process of spelling or in feedback.…

Facilitator's Guide to Staff Training for the Rural America Series. Module VIII: Placement. Research and Development Series No. 149I.

ERIC Educational Resources Information Center

Altschuld, James W.; And Others

The eighth module of the Rural America staff training series is designed to help individuals gain a better understanding of the placement process. The module begins with a brief introduction to placement in terms of definitions and the current status of placement in the participants' schools, addressing questions of who provides leadership for…

Concepts and embodiment design of a reentry recumbent seating system for the NASA Space Shuttle

NASA Technical Reports Server (NTRS)

Mcmillan, Scott; Looby, Brent; Devany, Chris; Chudej, Chris; Brooks, Barry

1993-01-01

This report deals with the generation of a recumbent seating system which will be used by NASA to shuttle astronauts from the Russian space station Mir. We begin by examining the necessity for designing a special couch for the returning astronauts. Next, we discuss the operating conditions and constraints of the recumbent seating system and provide a detailed function structure. After working through the conceptual design process, we came up with ten alternative designs which are presented in the appendices. These designs were evaluated and weighted to systematically determine the best choice for embodiment design. A detailed discussion of all components of the selected system follows with design calculations for the seat presented in the appendices. The report concludes with an evaluation of the resulting design and recommendations for further development.

Motoneuron firing in amyotrophic lateral sclerosis (ALS)

PubMed Central

de Carvalho, Mamede; Eisen, Andrew; Krieger, Charles; Swash, Michael

2014-01-01

Amyotrophic lateral sclerosis is an inexorably progressive neurodegenerative disorder involving the classical motor system and the frontal effector brain, causing muscular weakness and atrophy, with variable upper motor neuron signs and often an associated fronto-temporal dementia. The physiological disturbance consequent on the motor system degeneration is beginning to be well understood. In this review we describe aspects of the motor cortical, neuronal, and lower motor neuron dysfunction. We show how studies of the changes in the pattern of motor unit firing help delineate the underlying pathophysiological disturbance as the disease progresses. Such studies are beginning to illuminate the underlying disordered pathophysiological processes in the disease, and are important in designing new approaches to therapy and especially for clinical trials. PMID:25294995

Neural networks for data mining electronic text collections

NASA Astrophysics Data System (ADS)

Walker, Nicholas; Truman, Gregory

1997-04-01

The use of neural networks in information retrieval and text analysis has primarily suffered from the issues of adequate document representation, the ability to scale to very large collections, dynamism in the face of new information and the practical difficulties of basing the design on the use of supervised training sets. Perhaps the most important approach to begin solving these problems is the use of `intermediate entities' which reduce the dimensionality of document representations and the size of documents collections to manageable levels coupled with the use of unsupervised neural network paradigms. This paper describes the issues, a fully configured neural network-based text analysis system--dataHARVEST--aimed at data mining text collections which begins this process, along with the remaining difficulties and potential ways forward.

Pre-engineering Spaceflight Validation of Environmental Models and the 2005 HZETRN Simulation Code

NASA Technical Reports Server (NTRS)

Nealy, John E.; Cucinotta, Francis A.; Wilson, John W.; Badavi, Francis F.; Dachev, Ts. P.; Tomov, B. T.; Walker, Steven A.; DeAngelis, Giovanni; Blattnig, Steve R.; Atwell, William

2006-01-01

The HZETRN code has been identified by NASA for engineering design in the next phase of space exploration highlighting a return to the Moon in preparation for a Mars mission. In response, a new series of algorithms beginning with 2005 HZETRN, will be issued by correcting some prior limitations and improving control of propagated errors along with established code verification processes. Code validation processes will use new/improved low Earth orbit (LEO) environmental models with a recently improved International Space Station (ISS) shield model to validate computational models and procedures using measured data aboard ISS. These validated models will provide a basis for flight-testing the designs of future space vehicles and systems of the Constellation program in the LEO environment.

KSC-2010-4537

NASA Image and Video Library

2010-08-30

CAPE CANAVERAL, Fla. -- Technicians in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, begin processing the Alpha Magnetic Spectrometer, or AMS, to prepare it for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the International Space Station aboard space shuttle Endeavour's STS-134 mission targeted to launch Feb. 26, 2011. Photo credit: NASA/Jack Pfaller

Pattern database applications from design to manufacturing

NASA Astrophysics Data System (ADS)

Zhuang, Linda; Zhu, Annie; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

2017-03-01

Pattern-based approaches are becoming more common and popular as the industry moves to advanced technology nodes. At the beginning of a new technology node, a library of process weak point patterns for physical and electrical verification are starting to build up and used to prevent known hotspots from re-occurring on new designs. Then the pattern set is expanded to create test keys for process development in order to verify the manufacturing capability and precheck new tape-out designs for any potential yield detractors. With the database growing, the adoption of pattern-based approaches has expanded from design flows to technology development and then needed for mass-production purposes. This paper will present the complete downstream working flows of a design pattern database(PDB). This pattern-based data analysis flow covers different applications across different functional teams from generating enhancement kits to improving design manufacturability, populating new testing design data based on previous-learning, generating analysis data to improve mass-production efficiency and manufacturing equipment in-line control to check machine status consistency across different fab sites.

76 FR 49303 - Approval and Promulgation of Air Quality Implementation Plans; Minnesota; Rules Update

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-10

... design requirements for the monitoring systems. The revised CMS rules also delineate the recordkeeping..., [Insert page number where the document begins]. 7017.1140 CEMS design 03/01/99 08/10/11, [Insert page...]. 7017.1190 COMS design 03/01/99 08/10/11, [Insert page requirements. number where the document begins...

An inquiry-based practical for a large, foundation-level undergraduate laboratory that enhances student understanding of basic cellular concepts and scientific experimental design.

PubMed

Bugarcic, A; Zimbardi, K; Macaranas, J; Thorn, P

2012-01-01

Student-centered education involving research experiences or inquiry have been shown to help undergraduate students understand, and become excited about, the process of scientific investigation. These benefits are particularly important for students in the early stages of their degree (Report and Kenny, http://naplesccsunysbedu/Pres/boyernsf/1998). However, embedding such experiences into the curriculum is particularly difficult when dealing with early stage students, who are in larger cohorts and often lack the background content knowledge necessary to engage with primary research literature and research level methods and equipment. We report here the design, delivery, assessment, and subsequent student learning outcomes of a 4-week practical module for 120 students at the beginning of their second year of university, which successfully engages students in designing cell culture experiments and in understanding the molecular processes and machinery involved in the basic cellular process of macropinocytosis. Copyright © 2011 Wiley Periodicals, Inc.

The Landsat Data Continuity Mission Operational Land Imager (OLI) Radiometric Calibration

NASA Technical Reports Server (NTRS)

Markham, Brian L.; Dabney, Philip W.; Murphy-Morris, Jeanine E.; Knight, Edward J.; Kvaran, Geir; Barsi, Julia A.

2010-01-01

The Operational Land Imager (OLI) on the Landsat Data Continuity Mission (LDCM) has a comprehensive radiometric characterization and calibration program beginning with the instrument design, and extending through integration and test, on-orbit operations and science data processing. Key instrument design features for radiometric calibration include dual solar diffusers and multi-lamped on-board calibrators. The radiometric calibration transfer procedure from NIST standards has multiple checks on the radiometric scale throughout the process and uses a heliostat as part of the transfer to orbit of the radiometric calibration. On-orbit lunar imaging will be used to track the instruments stability and side slither maneuvers will be used in addition to the solar diffuser to flat field across the thousands of detectors per band. A Calibration Validation Team is continuously involved in the process from design to operations. This team uses an Image Assessment System (IAS), part of the ground system to characterize and calibrate the on-orbit data.

Implementation of a Distributed Object-Oriented Database Management System

DTIC Science & Technology

1989-03-01

and heuristic algorithms. A method for determining ueit allocation by splitting relations in the conceptual schema base on queries and updates is...level framworks can provide to the user the appearance of many tools to be closely integrated. In particular, the KBSA tools use many high level...development process should begin first with conceptual design of the system. Approximately one month should be used to decide how the new projects

Research and development plan for the Slagging Pyrolysis Incinerator. [For TRU waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hedahl, T.G.; McCormack, M.D.

1979-01-01

Objective is to develop an incinerator for processing disposed transuranium waste. This R and D plan describes the R and D efforts required to begin conceptual design of the Slagging Pyrolysis Incinerator (Andco-Torrax). The program includes: incinerator, off-gas treatment, waste handling, instrumentation, immobilization analyses, migration studies, regulations, Belgium R and D test plan, Disney World test plan, and remote operation and maintenance. (DLC)

New Beginnings: A Report to the Faculty of Arts and Sciences on the State of the Library.

ERIC Educational Resources Information Center

De Gennaro, Richard

This paper is a report to the Faculty of Arts and Sciences on the changing state of the Harvard College Library and the larger information environment of which it is a part. It is also a call for faculty participation in a strategic planning process designed to reposition the Library to serve an information age university in the twenty-first…

Overview and evolution of the LeRC PMAD DC test bed

NASA Technical Reports Server (NTRS)

Soeder, James F.; Frye, Robert J.

1992-01-01

Since the beginning of the Space Station Freedom Program (SSFP), the Lewis Research Center (LeRC) has been developed electrical power system test beds to support the overall design effort. Through this time, the SSFP has changed the design baseline numerous times, however, the test bed effort has endeavored to track these changes. Beginning in August 1989 with the baseline and an all DC system, a test bed was developed to support the design baseline. The LeRC power measurement and distribution (PMAD) DC test bed and the changes in the restructure are described. The changes included the size reduction of primary power channel and various power processing elements. A substantial reduction was also made in the amount of flight software with the subsequent migration of these functions to ground control centers. The impact of these changes on the design of the power hardware, the controller algorithms, the control software, and a description of their current status is presented. An overview of the testing using the test bed is described, which includes investigation of stability and source impedance, primary and secondary fault protection, and performance of a rotary utility transfer device. Finally, information is presented on the evolution of the test bed to support the verification and operational phases of the SSFP in light of these restructure scrubs.

Overview and evolution of the LeRC PMAD DC Testbed

NASA Technical Reports Server (NTRS)

Soeder, James F.; Frye, Robert J.

1992-01-01

Since the beginning of the Space Station Freedom Program (SSFP), the Lewis Research Center (LeRC) has been developed electrical power system test beds to support the overall design effort. Through this time, the SSFP has changed the design baseline numerous times, however, the test bed effort has endeavored to track these changes. Beginning in August 1989 with the baseline and an all DC system, a test bed was developed to support the design baseline. The LeRC power measurement and distribution (PMAD) DC test bed and the changes in the restructure are described. The changes includeed the size reduction of primary power channel and various power processing elements. A substantial reduction was also made in the amount of flight software with the subsequent migration of these functions to ground control centers. The impact of these changes on the design of the power hardware, the controller algorithms, the control software, and a description of their current status is presented. An overview of the testing using the test bed is described, which includes investigation of stability and source impedance, primary and secondary fault protection, and performance of a rotary utility transfer device. Finally, information is presented on the evolution of the test bed to support the verification and operational phases of the SSFP in light of these restructure scrubs.

The Application of V&V within Reuse-Based Software Engineering

NASA Technical Reports Server (NTRS)

Addy, Edward

1996-01-01

Verification and Validation (V&V) is performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors as early as possible during the development process. Early discovery is important in order to minimize the cost and other impacts of correcting these errors. In reuse-based software engineering, decisions on the requirements, design and even implementation of domain assets can can be made prior to beginning development of a specific system. in order to bring the effectiveness of V&V to bear within reuse-based software engineering. V&V must be incorporated within the domain engineering process.

Human Rating the Orion Parachute System

NASA Technical Reports Server (NTRS)

Machin, Ricardo A.; Fisher, Timothy E.; Evans, Carol T.; Stewart, Christine E.

2011-01-01

Human rating begins with design. Converging on the requirements and identifying the risks as early as possible in the design process is essential. Understanding of the interaction between the recovery system and the spacecraft will in large part dictate the achievable reliability of the final design. Component and complete system full-scale flight testing is critical to assure a realistic evaluation of the performance and reliability of the parachute system. However, because testing is so often difficult and expensive, comprehensive analysis of test results and correlation to accurate modeling completes the human rating process. The National Aeronautics and Space Administration (NASA) Orion program uses parachutes to stabilize and decelerate the Crew Exploration Vehicle (CEV) spacecraft during subsonic flight in order to deliver a safe water landing. This paper describes the approach that CEV Parachute Assembly System (CPAS) will take to human rate the parachute recovery system for the CEV.

Shared decision making in designing new healthcare environments-time to begin improving quality.

PubMed

Elf, Marie; Fröst, Peter; Lindahl, Göran; Wijk, Helle

2015-03-21

Successful implementation of new methods and models of healthcare to achieve better patient outcomes and safe, person-centered care is dependent on the physical environment of the healthcare architecture in which the healthcare is provided. Thus, decisions concerning healthcare architecture are critical because it affects people and work processes for many years and requires a long-term financial commitment from society. In this paper, we describe and suggest several strategies (critical factors) to promote shared-decision making when planning and designing new healthcare environments. This paper discusses challenges and hindrances observed in the literature and from the authors extensive experiences in the field of planning and designing healthcare environments. An overview is presented of the challenges and new approaches for a process that involves the mutual exchange of knowledge among various stakeholders. Additionally, design approaches that balance the influence of specific and local requirements with general knowledge and evidence that should be encouraged are discussed. We suggest a shared-decision making and collaborative planning and design process between representatives from healthcare, construction sector and architecture based on evidence and end-users' perspectives. If carefully and systematically applied, this approach will support and develop a framework for creating high quality healthcare environments.

40 CFR 154.10 - Petitions to begin the Special Review process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Petitions to begin the Special Review...) PESTICIDE PROGRAMS SPECIAL REVIEW PROCEDURES General Provisions § 154.10 Petitions to begin the Special Review process. The Administrator may evaluate a pesticide use under the criteria of § 154.7 either on...

Liquid rocket performance computer model with distributed energy release

NASA Technical Reports Server (NTRS)

Combs, L. P.

1972-01-01

Development of a computer program for analyzing the effects of bipropellant spray combustion processes on liquid rocket performance is described and discussed. The distributed energy release (DER) computer program was designed to become part of the JANNAF liquid rocket performance evaluation methodology and to account for performance losses associated with the propellant combustion processes, e.g., incomplete spray gasification, imperfect mixing between sprays and their reacting vapors, residual mixture ratio striations in the flow, and two-phase flow effects. The DER computer program begins by initializing the combustion field at the injection end of a conventional liquid rocket engine, based on injector and chamber design detail, and on propellant and combustion gas properties. It analyzes bipropellant combustion, proceeding stepwise down the chamber from those initial conditions through the nozzle throat.

Stingray Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

DOE Data Explorer

Ken Rhinefrank

2016-07-25

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficiently. The FMECA can begin once there is enough detail to functions and failure modes of a given system, and its interfaces with other systems. The FMECA occurs coincidently with the design process and is an iterative process which allows for design changes to overcome deficiencies in the analysis.Risk Registers for major subsystems completed according to the methodology described in "Failure Mode Effects and Criticality Analysis Risk Reduction Program Plan.pdf" document below, in compliance with the DOE Risk Management Framework developed by NREL.

Using mathematics to solve real world problems: the role of enablers

NASA Astrophysics Data System (ADS)

Geiger, Vincent; Stillman, Gloria; Brown, Jill; Galbriath, Peter; Niss, Mogens

2018-03-01

The purpose of this article is to report on a newly funded research project in which we will investigate how secondary students apply mathematical modelling to effectively address real world situations. Through this study, we will identify factors, mathematical, cognitive, social and environmental that "enable" year 10/11 students to successfully begin the modelling process, that is, formulate and mathematise a real world problem. The 3-year study will take a design research approach in working intensively with six schools across two educational jurisdictions. It is anticipated that this research will generate new theoretical and practical insights into the role of "enablers" within the process of mathematisation, leading to the development of principles for the design and implementation for tasks that support students' development as modellers.

Value-driven process management: using value to improve processes.

PubMed

Melnyk, S A; Christensen, R T

2000-08-01

Every firm can be viewed as consisting of various processes. These processes affect everything that the firm does from accepting orders and designing products to scheduling production. In many firms, the management of processes often reflects considerations of efficiency (cost) rather than effectiveness (value). In this article, we introduce a well-structured process for managing processes that begins not with the process, but rather with the customer and the product and the concept of value. This process progresses through a number of steps which include issues such as defining value, generating the appropriate metrics, identifying the critical processes, mapping and assessing the performance of these processes, and identifying long- and short-term areas for action. What makes the approach presented in this article so powerful is that it explicitly links the customer to the process and that the process is evaluated in term of its ability to effectively serve the customers.

KSC-2009-4794

NASA Image and Video Library

2009-08-19

CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Orbiter Processing Facility 2, workers begin removing the forward reaction control system, or FRCS, from space shuttle Endeavour's forward fuselage nose area. The FRCS provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Endeavour is designated as the shuttle for the STS-130 mission, targeted for launch in February 2010. Photo credit: NASA/Jack Pfaller

A design for integration.

PubMed

Fenna, D

1977-09-01

For nearly two decades, the development of computerized information systems has struggled for acceptable compromises between the unattainable "total system" and the unacceptable separate applications. Integration of related applications is essential if the computer is to be exploited fully, yet relative simplicity is necessary for systems to be implemented in a reasonable time-scale. This paper discusses a system being progressively developed from minimal beginnings but which, from the outset, had a highly flexible and fully integrated system basis. The system is for batch processing, but can accommodate on-line data input; it is similar in its approach to many transaction-processing real-time systems.

Socialization of emotion: who influences whom and how?

PubMed

Zahn-Waxler, Carolyn

2010-01-01

Emotion socialization begins within the family setting and extends outward as children transition into expanded social worlds. Children contribute to their socialization from the first years of life, so the dynamics between parents and children are reciprocal in nature. Because socialization influences are best inferred from patterns that unfold over time, longitudinal research can help to untangle these processes. Laboratory observations of emotion exchanges and discussions or experimental manipulations of environmental processes also provide valuable information about causal influences and direction of effects. Parents and children must be studied within the same research designs to understand emotion socialization. (c) Wiley Periodicals, Inc.

Extending the boundaries of reverse engineering

NASA Astrophysics Data System (ADS)

Lawrie, Chris

2002-04-01

In today's market place the potential of Reverse Engineering as a time compression tool is commonly lost under its traditional definition. The term Reverse Engineering was coined way back at the advent of CMM machines and 3D CAD systems to describe the process of fitting surfaces to captured point data. Since these early beginnings, downstream hardware scanning and digitising systems have evolved in parallel with an upstream demand, greatly increasing the potential of a point cloud data set within engineering design and manufacturing processes. The paper will discuss the issues surrounding Reverse Engineering at the turn of the millennium.

Empirical OPC rule inference for rapid RET application

NASA Astrophysics Data System (ADS)

Kulkarni, Anand P.

2006-10-01

A given technological node (45 nm, 65 nm) can be expected to process thousands of individual designs. Iterative methods applied at the node consume valuable days in determining proper placement of OPC features, and manufacturing and testing mask correspondence to wafer patterns in a trial-and-error fashion for each design. Repeating this fabrication process for each individual design is a time-consuming and expensive process. We present a novel technique which sidesteps the requirement to iterate through the model-based OPC analysis and pattern verification cycle on subsequent designs at the same node. Our approach relies on the inference of rules from a correct pattern at the wafer surface it relates to the OPC and pre-OPC pattern layout files. We begin with an offline phase where we obtain a "gold standard" design file that has been fab-tested at the node with a prepared, post-OPC layout file that corresponds to the intended on-wafer pattern. We then run an offline analysis to infer rules to be used in this method. During the analysis, our method implicitly identifies contextual OPC strategies for optimal placement of RET features on any design at that node. Using these strategies, we can apply OPC to subsequent designs at the same node with accuracy comparable to the original design file but significantly smaller expected runtimes. The technique promises to offer a rapid and accurate complement to existing RET application strategies.

Process and data fragmentation-oriented enterprise network integration with collaboration modelling and collaboration agents

NASA Astrophysics Data System (ADS)

Li, Qing; Wang, Ze-yuan; Cao, Zhi-chao; Du, Rui-yang; Luo, Hao

2015-08-01

With the process of globalisation and the development of management models and information technology, enterprise cooperation and collaboration has developed from intra-enterprise integration, outsourcing and inter-enterprise integration, and supply chain management, to virtual enterprises and enterprise networks. Some midfielder enterprises begin to serve for different supply chains. Therefore, they combine related supply chains into a complex enterprise network. The main challenges for enterprise network's integration and collaboration are business process and data fragmentation beyond organisational boundaries. This paper reviews the requirements of enterprise network's integration and collaboration, as well as the development of new information technologies. Based on service-oriented architecture (SOA), collaboration modelling and collaboration agents are introduced to solve problems of collaborative management for service convergence under the condition of process and data fragmentation. A model-driven methodology is developed to design and deploy the integrating framework. An industrial experiment is designed and implemented to illustrate the usage of developed technologies in this paper.

Comparison of electron beam and laser beam powder bed fusion additive manufacturing process for high temperature turbine component materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dryepondt, Sebastien N; Pint, Bruce A; Ryan, Daniel

2016-04-01

The evolving 3D printer technology is now at the point where some turbine components could be additive manufactured (AM) for both development and production purposes. However, this will require a significant evaluation program to qualify the process and components to meet current design and quality standards. The goal of the project was to begin characterization of the microstructure and mechanical properties of Nickel Alloy X (Ni-22Cr-18Fe-9Mo) test bars fabricated by powder bed fusion (PBF) AM processes that use either an electron beam (EB) or laser beam (LB) power source. The AM materials produced with the EB and LB processes displayedmore » significant differences in microstructure and resultant mechanical properties. Accordingly, during the design analysis of AM turbine components, the specific mechanical behavior of the material produced with the selected AM process should be considered. Comparison of the mechanical properties of both the EB and LB materials to those of conventionally processed Nickel Alloy X materials indicates the subject AM materials are viable alternatives for manufacture of some turbine components.« less

The Sizing and Optimization Language (SOL): A computer language to improve the user/optimizer interface

NASA Technical Reports Server (NTRS)

Lucas, S. H.; Scotti, S. J.

1989-01-01

The nonlinear mathematical programming method (formal optimization) has had many applications in engineering design. A figure illustrates the use of optimization techniques in the design process. The design process begins with the design problem, such as the classic example of the two-bar truss designed for minimum weight as seen in the leftmost part of the figure. If formal optimization is to be applied, the design problem must be recast in the form of an optimization problem consisting of an objective function, design variables, and constraint function relations. The middle part of the figure shows the two-bar truss design posed as an optimization problem. The total truss weight is the objective function, the tube diameter and truss height are design variables, with stress and Euler buckling considered as constraint function relations. Lastly, the designer develops or obtains analysis software containing a mathematical model of the object being optimized, and then interfaces the analysis routine with existing optimization software such as CONMIN, ADS, or NPSOL. This final state of software development can be both tedious and error-prone. The Sizing and Optimization Language (SOL), a special-purpose computer language whose goal is to make the software implementation phase of optimum design easier and less error-prone, is presented.

Multi-Step Usage of in Vivo Models During Rational Drug Design and Discovery

PubMed Central

Williams, Charles H.; Hong, Charles C.

2011-01-01

In this article we propose a systematic development method for rational drug design while reviewing paradigms in industry, emerging techniques and technologies in the field. Although the process of drug development today has been accelerated by emergence of computational methodologies, it is a herculean challenge requiring exorbitant resources; and often fails to yield clinically viable results. The current paradigm of target based drug design is often misguided and tends to yield compounds that have poor absorption, distribution, metabolism, and excretion, toxicology (ADMET) properties. Therefore, an in vivo organism based approach allowing for a multidisciplinary inquiry into potent and selective molecules is an excellent place to begin rational drug design. We will review how organisms like the zebrafish and Caenorhabditis elegans can not only be starting points, but can be used at various steps of the drug development process from target identification to pre-clinical trial models. This systems biology based approach paired with the power of computational biology; genetics and developmental biology provide a methodological framework to avoid the pitfalls of traditional target based drug design. PMID:21731440

Trends in modern system theory

NASA Technical Reports Server (NTRS)

Athans, M.

1976-01-01

The topics considered are related to linear control system design, adaptive control, failure detection, control under failure, system reliability, and large-scale systems and decentralized control. It is pointed out that the design of a linear feedback control system which regulates a process about a desirable set point or steady-state condition in the presence of disturbances is a very important problem. The linearized dynamics of the process are used for design purposes. The typical linear-quadratic design involving the solution of the optimal control problem of a linear time-invariant system with respect to a quadratic performance criterion is considered along with gain reduction theorems and the multivariable phase margin theorem. The stumbling block in many adaptive design methodologies is associated with the amount of real time computation which is necessary. Attention is also given to the desperate need to develop good theories for large-scale systems, the beginning of a microprocessor revolution, the translation of the Wiener-Hopf theory into the time domain, and advances made in dynamic team theory, dynamic stochastic games, and finite memory stochastic control.

VE at Scope Time (VEST): Three construction examples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sperling, R.B.

1991-04-01

Value Engineering at Scope Time (VEST)'' was published in Value World, January-February-March 1991. That article describes VEST as a four-phase process utilizing the heart'' of VE methodology, which is designed to be used with members of construction design teams to help them focus on the scope of work by doing cost modeling, function analysis, brainstorming and evaluation of ideas. With minimal training designers, architects and engineers can become energized to find creative design solutions and learn an effective, synergistic team approach to facilities design projects using VEST. If time is available, the team can begin the development of some highermore » ranked ideas into preliminary proposals. This paper is an expansion of that article, adding a brief section on training and presenting three examples of VEST on construction projects at a federally-funded research Laboratory.« less

Inclusive design in architectural practice: Experiential learning of disability in architectural education.

PubMed

Mulligan, Kerry; Calder, Allyson; Mulligan, Hilda

2018-04-01

The built environment can facilitate or impede an individual's ability to participate in society. This is particularly so for people with disability. Architects are well placed to be advocates for design that enhances societal equality. This qualitative study explored architectural design students' perceptions of inclusive design, their reflections resulting from an experiential learning module and the subsequent influence of these on their design practice. Twenty four architectural design students participated in focus groups or individual interviews. Data were analyzed thematically. Three themes were evident: 1) Inclusive design was perceived as challenging, 2) Appreciation for the opportunity to learn about the perspectives of people with disabilities, and 3) Change of attitude toward inclusive design. Experiential learning had fostered reflection, changes in attitude and the realization that inclusive design, should begin at the start of the design process. For equitable access for all people to become reality, experiential learning, coupled with positive examples of inclusive design should be embedded in architectural education. Copyright © 2017 Elsevier Inc. All rights reserved.

Fatigue Crack Growth Database for Damage Tolerance Analysis

NASA Technical Reports Server (NTRS)

Forman, R. G.; Shivakumar, V.; Cardinal, J. W.; Williams, L. C.; McKeighan, P. C.

2005-01-01

The objective of this project was to begin the process of developing a fatigue crack growth database (FCGD) of metallic materials for use in damage tolerance analysis of aircraft structure. For this initial effort, crack growth rate data in the NASGRO (Registered trademark) database, the United States Air Force Damage Tolerant Design Handbook, and other publicly available sources were examined and used to develop a database that characterizes crack growth behavior for specific applications (materials). The focus of this effort was on materials for general commercial aircraft applications, including large transport airplanes, small transport commuter airplanes, general aviation airplanes, and rotorcraft. The end products of this project are the FCGD software and this report. The specific goal of this effort was to present fatigue crack growth data in three usable formats: (1) NASGRO equation parameters, (2) Walker equation parameters, and (3) tabular data points. The development of this FCGD will begin the process of developing a consistent set of standard fatigue crack growth material properties. It is envisioned that the end product of the process will be a general repository for credible and well-documented fracture properties that may be used as a default standard in damage tolerance analyses.

A Framework for Performing V&V within Reuse-Based Software Engineering

NASA Technical Reports Server (NTRS)

Addy, Edward A.

1996-01-01

Verification and validation (V&V) is performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors, especially errors related to critical processing, as early as possible during the development process. Early discovery is important in order to minimize the cost and other impacts of correcting these errors. In order to provide early detection of errors, V&V is conducted in parallel with system development, often beginning with the concept phase. In reuse-based software engineering, however, decisions on the requirements, design and even implementation of domain assets can be made prior to beginning development of a specific system. In this case, V&V must be performed during domain engineering in order to have an impact on system development. This paper describes a framework for performing V&V within architecture-centric, reuse-based software engineering. This framework includes the activities of traditional application-level V&V, and extends these activities into domain engineering and into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for the activities.

SIS Mixer Design for a Broadband Millimeter Spectrometer Suitable for Rapid Line Surveys and Redshift Determinations

NASA Technical Reports Server (NTRS)

Rice, F.; Sumner, M.; Zmuidzinas, J.; Hu, R.; LeDuc, H.; Harris, A.; Miller, D.

2004-01-01

We present some detail of the waveguide probe and SIS mixer chip designs for a low-noise 180-300 GHz double- sideband receiver with an instantaneous RF bandwidth of 24 GHz. The receiver's single SIS junction is excited by a broadband, fixed-tuned waveguide probe on a silicon substrate. The IF output is coupled to a 6-18 GHz MMIC low- noise preamplifier. Following further amplification, the output is processed by an array of 4 GHz, 128-channel analog autocorrelation spectrometers (WASP 11). The single-sideband receiver noise temperature goal of 70 Kelvin will provide a prototype instrument capable of rapid line surveys and of relatively efficient carbon monoxide (CO) emission line searches of distant, dusty galaxies. The latter application's goal is to determine redshifts by measuring the frequencies of CO line emissions from the star-forming regions dominating the submillimeter brightness of these galaxies. Construction of the receiver has begun; lab testing should begin in the fall. Demonstration of the receiver on the Caltech Submillimeter Observatory (CSO) telescope should begin in spring 2003.

Twenty-First Century Energy Policy Making in New Hampshire: Lessons for Collaboration

NASA Astrophysics Data System (ADS)

Herndon, Henry Phillip

In this thesis I investigate the organizational field that is New Hampshire's energy policy-making community as it engages with the state regulatory institution, the Public Utilities Commission, to grapple the challenges of designing a 21st century electricity marketplace. The Public Utilities Commission structure and function are evolving. Historically, the Commission has used adjudicative proceedings to carry out a ratemaking function for monopoly utilities. The Commission's adjudicative process is evolving to become increasingly collaborative as it begins to carry out its new function of 21st century electricity market design. I analyze both the new structure (collaboration) and the new function (21 st century electricity market design) of the Commission through three in-depth case studies of dockets (policy-making processes): Energy Efficiency Resource Standard, Electric Grid Modernization, and Net Metering. My findings identify ways in which the Public Utilities Commission structure for making energy policy decisions is flexible and may be shaped by stakeholders engaging in policy processes. Stakeholders have the power to collectively design regulatory proceedings to incorporate greater opportunities for collaboration to better suit the challenges posed by a 21st century electricity sector. I provide recommendations on how that redesign should occur.

Multidisciplinary Design Optimisation (MDO) Methods: Their Synergy with Computer Technology in the Design Process

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw

1999-01-01

The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate. A radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimisation (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behaviour by interaction of a large number of very simple models may be an inspiration for the above algorithms; the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should begin now, even though the widespread availability of massively parallel processing is still a few years away.

Frank Gilbreth and health care delivery method study driven learning.

PubMed

Towill, Denis R

2009-01-01

The purpose of this article is to look at method study, as devised by the Gilbreths at the beginning of the twentieth century, which found early application in hospital quality assurance and surgical "best practice". It has since become a core activity in all modern methods, as applied to healthcare delivery improvement programmes. The article traces the origin of what is now currently and variously called "business process re-engineering", "business process improvement" and "lean healthcare" etc., by different management gurus back to the century-old pioneering work of Frank Gilbreth. The outcome is a consistent framework involving "width", "length" and "depth" dimensions within which healthcare delivery systems can be analysed, designed and successfully implemented to achieve better and more consistent performance. Healthcare method (saving time plus saving motion) study is best practised as co-joint action learning activity "owned" by all "players" involved in the re-engineering process. However, although process mapping is a key step forward, in itself it is no guarantee of effective re-engineering. It is not even the beginning of the end of the change challenge, although it should be the end of the beginning. What is needed is innovative exploitation of method study within a healthcare organisational learning culture accelerated via the Gilbreth Knowledge Flywheel. It is shown that effective healthcare delivery pipeline improvement is anchored into a team approach involving all "players" in the system especially physicians. A comprehensive process study, constructive dialogue, proper and highly professional re-engineering plus managed implementation are essential components. Experience suggests "learning" is thereby achieved via "natural groups" actively involved in healthcare processes. The article provides a proven method for exploiting Gilbreths' outputs and their many successors in enabling more productive evidence-based healthcare delivery as summarised in the "learn-do-learn-do" feedback loop in the Gilbreth Knowledge Flywheel.

Laboratory Practices of Beginning Secondary Science Teachers: A Five-Year Study

ERIC Educational Resources Information Center

Wong, Sissy S.; Firestone, Jonah B.; Luft, Julie A.; Weeks, Charles B.

2013-01-01

During the beginning years of teaching, science teachers develop the knowledge and skills needed to design and implement science laboratories. In this regard, this quantitative study focused on the reported laboratory practices of 61 beginning secondary science teachers who participated in four different induction programs. The results…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel A. Riza

The goals of the first six months of this project were to begin laying the foundations for both the SiC front-end optical chip fabrication techniques for high pressure gas species sensing as well as the design, assembly, and test of a portable high pressure high temperature calibration test cell chamber for introducing gas species. This calibration cell will be used in the remaining months for proposed first stage high pressure high temperature gas species sensor experimentation and data processing. All these goals have been achieved and are described in detail in the report. Both design process and diagrams for themore » mechanical elements as well as the optical systems are provided. Photographs of the fabricated calibration test chamber cell, the optical sensor setup with the calibration cell, the SiC sample chip holder, and relevant signal processing mathematics are provided. Initial experimental data from both the optical sensor and fabricated test gas species SiC chips is provided. The design and experimentation results are summarized to give positive conclusions on the proposed novel high temperature high pressure gas species detection optical sensor technology.« less

What is the Final Verification of Engineering Requirements?

NASA Technical Reports Server (NTRS)

Poole, Eric

2010-01-01

This slide presentation reviews the process of development through the final verification of engineering requirements. The definition of the requirements is driven by basic needs, and should be reviewed by both the supplier and the customer. All involved need to agree upon a formal requirements including changes to the original requirements document. After the requirements have ben developed, the engineering team begins to design the system. The final design is reviewed by other organizations. The final operational system must satisfy the original requirements, though many verifications should be performed during the process. The verification methods that are used are test, inspection, analysis and demonstration. The plan for verification should be created once the system requirements are documented. The plan should include assurances that every requirement is formally verified, that the methods and the responsible organizations are specified, and that the plan is reviewed by all parties. The options of having the engineering team involved in all phases of the development as opposed to having some other organization continue the process once the design has been complete is discussed.

Reference Models for Structural Technology Assessment and Weight Estimation

NASA Technical Reports Server (NTRS)

Cerro, Jeff; Martinovic, Zoran; Eldred, Lloyd

2005-01-01

Previously the Exploration Concepts Branch of NASA Langley Research Center has developed techniques for automating the preliminary design level of launch vehicle airframe structural analysis for purposes of enhancing historical regression based mass estimating relationships. This past work was useful and greatly reduced design time, however its application area was very narrow in terms of being able to handle a large variety in structural and vehicle general arrangement alternatives. Implementation of the analysis approach presented herein also incorporates some newly developed computer programs. Loft is a program developed to create analysis meshes and simultaneously define structural element design regions. A simple component defining ASCII file is read by Loft to begin the design process. HSLoad is a Visual Basic implementation of the HyperSizer Application Programming Interface, which automates the structural element design process. Details of these two programs and their use are explained in this paper. A feature which falls naturally out of the above analysis paradigm is the concept of "reference models". The flexibility of the FEA based JAVA processing procedures and associated process control classes coupled with the general utility of Loft and HSLoad make it possible to create generic program template files for analysis of components ranging from something as simple as a stiffened flat panel, to curved panels, fuselage and cryogenic tank components, flight control surfaces, wings, through full air and space vehicle general arrangements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reggio, R.; Haun, R.

This paper reviews the engineering and design work along with the installation procedures for a Persian Gulf natural gas pipeline. OPMI Ltd., a joint venture of Offshore Pipelines, Inc., Houston, and Maritime Industrial Services Co., Ltd., United Arab Emirates (UAE), successfully completed this 57.4 mile, 16-inch gas export pipeline for Consolidated Transmissions Inc. The pipeline begins at a platform in the Mubarek field offshore Sharjah, UAE, and runs to a beach termination at the Dugas treatment plant, Jebel Ali, Dubai. The paper describes the site preparation required for installation of the pipeline along with the specific design of the pipelinemore » itself to deal with corrosion, welding processes, condensate dropout, and temperature gradients.« less

Resolving Phase Ambiguities in the Calibration of Redundant Interferometric Arrays: Implications for Array Design

DTIC Science & Technology

2016-03-04

summary of the linear algebra involved. As we have seen, the RSC process begins with the interferometric phase measurement β, which due to wrapping will...mentary Divisors) in Section 2 and the following defi- nition of the matrix determinant. This definition is given in many linear algebra texts (see...principle solve for a particular solution of this system by arbitrarily setting two object phases (whose spatial frequencies are not co- linear ) and one

Planetary Waves and Mesoscale Disturbances in the Middle and Upper Atmosphere

DTIC Science & Technology

1998-05-14

processing of ionogram records made us to begin designing a computer - controlled system to collect, store, display and scale the ionograms in digital...circuit board " L - 154". L - 154 passed signals from the re- ceiver and the system of the control to computer in order to collect in for motion...the main purpose of the PSMOS project is the establishment of a ground-based mesopause observing system for the investigation of planetary scale

Ion mobility spectrometry: A personal view of its development at UCSB

PubMed Central

Bowers, Michael T.

2014-01-01

Ion mobility is not a newly discovered phenomenon. It has roots going back to Langevin at the beginning of the 20th century. Our group initially got involved by accident around 1990 and this paper is a brief account of what has transpired here at UCSB the past 25 years in response to this happy accident. We started small, literally, with transition metal atomic ions and transitioned to carbon clusters, synthetic polymers, most types of biological molecules and eventually peptide and protein oligomeric assembly. Along the way we designed and built several generations of instruments, a process that is still ongoing. And perhaps most importantly we have incorporated theory with experiment from the beginning; a necessary wedding that allows an atomistic face to be put on the otherwise interesting but not fully informative cross section measurements. PMID:25147478

Examining Factors Affecting Beginning Teachers' Transfer of Learning of ICT-Enhanced Learning Activities in Their Teaching Practice

ERIC Educational Resources Information Center

Agyei, Douglas D.; Voogt, Joke

2014-01-01

This study examined 100 beginning teachers' transfer of learning when utilising Information Communication Technology-enhanced activity-based learning activities. The beginning teachers had participated in a professional development program that was characterised by "learning technology by collaborative design" in their final year of…

Principal-Teacher Interactions and Teacher Leadership Development: Beginning Teachers' Perspectives

ERIC Educational Resources Information Center

Szeto, Elson; Cheng, Annie Yan-Ni

2018-01-01

Teacher leadership lies at the heart of school improvement. Leadership development among beginning teachers, however, is often neglected. This paper examines the role of principal-teacher interactions in the leadership development of a group of beginning teachers. Using a case study design, interviews were conducted and documentary evidence was…

Beginning Teachers' Job Satisfaction: The Impact of School-Based Factors

ERIC Educational Resources Information Center

Lam, Bick-har; Yan, Hoi-fai

2011-01-01

Using a longitudinal design, the job satisfaction and career development of beginning teachers are explored in the present study. Beginning teachers were initially interviewed after graduation from the teacher training programme and then after gaining a two-year teaching experience. The results are presented in a fourfold typology in which the…

Beginning Teacher's Handbook.

ERIC Educational Resources Information Center

Wildman, Terry M.; And Others

Intended for beginning teachers in Virginia, this handbook is designed to serve as a guide for negotiating the first few years of teaching. The concept of teacher as problem solver is promoted throughout the manual. The handbook is organized around the idea that the beginning teacher's main tasks are to: (1) discover how to learn from their own…

KSC-2009-6626

NASA Image and Video Library

2009-11-27

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, space shuttle Atlantis begins its slow trek from the Shuttle Landing Facility to Orbiter Processing Facility-1, or OPF-1. Atlantis touched down on Runway 33 after 11 days in space, completing the 4.5-million mile STS-129 mission to the International Space Station on orbit 171. In OPF-1, processing will begin for Atlantis' next mission, designated STS-132. The 34th shuttle mission to the International Space Station, Atlantis will deliver an Integrated Cargo Carrier and Russian-built Mini Research Module, or MRM, to the orbiting laboratory on STS-132. The second in a series of new pressurized components for Russia, the MRM will be permanently attached to the bottom port of the Zarya module. The Russian module also will carry U.S. pressurized cargo. Three spacewalks are planned to stage spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-Purpose Laboratory Module also are payloads on the flight. Photo credit: NASA/Jack Pfaller

The Complex Dynamics of Student Engagement in Novel Engineering Design Activities

NASA Astrophysics Data System (ADS)

McCormick, Mary

In engineering design, making sense of "messy," design situations is at the heart of the discipline (Schon, 1983); engineers in practice bring structure to design situations by organizing, negotiating, and coordinating multiple aspects (Bucciarelli, 1994; Stevens, Johri, & O'Connor, 2014). In classroom settings, however, students are more often given well-defined, content-focused engineering tasks (Jonassen, 2014). These tasks are based on the assumption that elementary students are unable to grapple with the complexity or open-endedness of engineering design (Crismond & Adams, 2012). The data I present in this dissertation suggest the opposite. I show that students are not only able to make sense of, or frame (Goffman, 1974), complex design situations, but that their framings dynamically involve their nascent abilities for engineering design. The context of this work is Novel Engineering, a larger research project that explores using children's literature as an access point for engineering design. Novel Engineering activities are inherently messy: there are characters with needs, settings with implicit constraints, and rich design situations. In a series of three studies, I show how students' framings of Novel Engineering design activities involve their reasoning and acting as beginning engineers. In the first study, I show two students whose caring for the story characters contributes to their stability in framing the task: they identify the needs of their fictional clients and iteratively design a solution to meet their clients' needs. In the second, I show how students' shifting and negotiating framings influence their engineering assumptions and evaluation criteria. In the third, I show how students' coordinating framings involve navigating a design process to meet clients' needs, classroom expectations, and technical requirements. Collectively, these studies contribute to literature by documenting students' productive beginnings in engineering design. The implications span research and practice, specifically targeting how we attend to and support students as they engage in engineering design.

Systems Engineering and Management Applications of ISO 9001:2015 for Government

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2016-01-01

The manufacturing segment of the business world is busy assessing the impact of ISO 9001:2015, and updating their management systems to meet the required compliance date. What does the new revision mean for government agencies that deliver large engineering projects rather than mass production? In fact, the standard, especially the new revision, can be used quite readily for government agencies, or applied to specific projects, once it is understood in terms of the similarities with systems engineering and project management. From there it can be extrapolated to "mission realization" systems, and a Quality Management System (QMS) is a logical result that can bring order to processes and systems that likely already exist in some fashion. ISO 9001:2015 is less product-oriented than previous versions. It can be more broadly applied to public organizations as well as private; and to services (missions) as well as products. The emphasis on risk management in the revised standard provides the needed balance for weighing decisions with respect to cost, schedule, technical, safety, and regulatory compliance; so if this is not part of agency governance already, this is a good place to start, especially for large engineering projects. The Systems Engineering standard used for this analysis is from NASA's NPR 7123.1 NASA Systems Engineering Processes and Requirements; however, those who are more familiar with ISO/IEC 26702 Systems Engineering-application and management of the systems engineering process, or SAE/EIA 632 Processes for Engineering a System will also recognize the similarities. In reality, the QMS outlined by ISO 9001 reinforces the systems engineering processes, and serves to ensure that they are adequately implemented, although most of the ISO 9001 literature emphasizes the production and process aspects of the standard. Rather than beginning with ISO 9001and getting lost in the vocabulary, it is useful to begin with the systems engineering lifecycle. Identification of stakeholder expectations, identifying solutions, creating specific product or service designs, production of the product or service, delivery to the public, and the associated management, planning, and control processes, are a familiar place to begin thinking of the overall system of identifying, designing, and competing a project or mission. Lining up this lifecycle with the ISO requirements (see Figure 1) illustrates how a quality management system is concerned with the same processes, and provides a governance and assurance function. If implemented properly, there are cost savings resulting from less rework, repair, reprocessing, failures, misplaced documents, and similar types of deficiencies1. Starting with an organization's systems engineering processes allows the organization to use their own terminology for a QMS plan, and tailor the plan to their own project or organization, so that it is more easily developed, understood, and implemented.

Signal processing: opportunities for superconductive circuits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ralston, R.W.

1985-03-01

Prime motivators in the evolution of increasingly sophisticated communication and detection systems are the needs for handling ever wider signal bandwidths and higher data processing speeds. These same needs drive the development of electronic device technology. Until recently the superconductive community has been tightly focused on digital devices for high speed computers. The purpose of this paper is to describe opportunities and challenges which exist for both analog and digital devices in a less familiar area, that of wideband signal processing. The function and purpose of analog signal-processing components, including matched filters, correlators and Fourier transformers, will be described andmore » examples of superconductive implementations given. A canonic signal-processing system is then configured using these components in combination with analog/digital converters and digital output circuits to highlight the important issues of dynamic range, accuracy and equivalent computation rate. Superconductive circuits hold promise for processing signals of 10-GHz bandwidth. Signal processing systems, however, can be properly designed and implemented only through a synergistic combination of the talents of device physicists, circuit designers, algorithm architects and system engineers. An immediate challenge to the applied superconductivity community is to begin sharing ideas with these other researchers.« less

Kistler reusable vehicle facility design and operational approach

NASA Astrophysics Data System (ADS)

Fagan, D.; McInerney, F.; Johnston, C.; Tolson, B.

Kistler Aerospace Corporation is designing and developing the K-1, the world's first fully reusable aerospace vehicle to deliver satellites into orbit. The K-1 vehicle test program will be conducted in Woomera, Australia, with commercial operations scheduled to begin shortly afterwards. Both stages of the K-1 will return to the launch site utilizing parachutes and airbags for a soft landing within 24 h after launch. The turnaround flow of the two stages will cycle from landing site to a maintenance/refurbishment facility and through the next launch in only 9 days. Payload processing will occur in a separate facility in parallel with recovery and refurbishment operations. The vehicle design and on-board checkout capability of the avionics system eliminates the need for an abundance of ground checkout equipment. Payload integration, vehicle assembly, and K-1 transport to the launch pad will be performed horizontally, simplifying processing and reducing infrastructure requirements. This simple, innovative, and cost-effective approach will allow Kistler to offer its customers flexible, low-cost, and on-demand launch services.

The Timeseries Toolbox - A Web Application to Enable Accessible, Reproducible Time Series Analysis

NASA Astrophysics Data System (ADS)

Veatch, W.; Friedman, D.; Baker, B.; Mueller, C.

2017-12-01

The vast majority of data analyzed by climate researchers are repeated observations of physical process or time series data. This data lends itself of a common set of statistical techniques and models designed to determine trends and variability (e.g., seasonality) of these repeated observations. Often, these same techniques and models can be applied to a wide variety of different time series data. The Timeseries Toolbox is a web application designed to standardize and streamline these common approaches to time series analysis and modeling with particular attention to hydrologic time series used in climate preparedness and resilience planning and design by the U. S. Army Corps of Engineers. The application performs much of the pre-processing of time series data necessary for more complex techniques (e.g. interpolation, aggregation). With this tool, users can upload any dataset that conforms to a standard template and immediately begin applying these techniques to analyze their time series data.

User engineering: A new look at system engineering

NASA Technical Reports Server (NTRS)

Mclaughlin, Larry L.

1987-01-01

User Engineering is a new System Engineering perspective responsible for defining and maintaining the user view of the system. Its elements are a process to guide the project and customer, a multidisciplinary team including hard and soft sciences, rapid prototyping tools to build user interfaces quickly and modify them frequently at low cost, and a prototyping center for involving users and designers in an iterative way. The main consideration is reducing the risk that the end user will not or cannot effectively use the system. The process begins with user analysis to produce cognitive and work style models, and task analysis to produce user work functions and scenarios. These become major drivers of the human computer interface design which is presented and reviewed as an interactive prototype by users. Feedback is rapid and productive, and user effectiveness can be measured and observed before the system is built and fielded. Requirements are derived via the prototype and baselined early to serve as an input to the architecture and software design.

A Map for Clinical Laboratories Management Indicators in the Intelligent Dashboard.

PubMed

Azadmanjir, Zahra; Torabi, Mashallah; Safdari, Reza; Bayat, Maryam; Golmahi, Fatemeh

2015-08-01

management challenges of clinical laboratories are more complicated for educational hospital clinical laboratories. Managers can use tools of business intelligence (BI), such as information dashboards that provide the possibility of intelligent decision-making and problem solving about increasing income, reducing spending, utilization management and even improving quality. Critical phase of dashboard design is setting indicators and modeling causal relations between them. The paper describes the process of creating a map for laboratory dashboard. the study is one part of an action research that begins from 2012 by innovation initiative for implementing laboratory intelligent dashboard. Laboratories management problems were determined in educational hospitals by the brainstorming sessions. Then, with regard to the problems key performance indicators (KPIs) specified. the map of indicators designed in form of three layered. They have a causal relationship so that issues measured in the subsequent layers affect issues measured in the prime layers. the proposed indicator map can be the base of performance monitoring. However, these indicators can be modified to improve during iterations of dashboard designing process.

Semiconductor-inspired design principles for superconducting quantum computing.

PubMed

Shim, Yun-Pil; Tahan, Charles

2016-03-17

Superconducting circuits offer tremendous design flexibility in the quantum regime culminating most recently in the demonstration of few qubit systems supposedly approaching the threshold for fault-tolerant quantum information processing. Competition in the solid-state comes from semiconductor qubits, where nature has bestowed some very useful properties which can be utilized for spin qubit-based quantum computing. Here we begin to explore how selective design principles deduced from spin-based systems could be used to advance superconducting qubit science. We take an initial step along this path proposing an encoded qubit approach realizable with state-of-the-art tunable Josephson junction qubits. Our results show that this design philosophy holds promise, enables microwave-free control, and offers a pathway to future qubit designs with new capabilities such as with higher fidelity or, perhaps, operation at higher temperature. The approach is also especially suited to qubits on the basis of variable super-semi junctions.

Child- and elder-friendly urban public places in Fatahillah Square Historical District

NASA Astrophysics Data System (ADS)

Srinaga, F.; LKatoppo, M.; Hidayat, J.

2018-03-01

Fatahillah square as an important historical urban square in Jakarta has problems in eye level area integrative processing. Visitors cannot enjoy their time while in the square regarding their visuals, feelings, space, and bodies comfort. These also lead to other problems in which the square is lack of friendly and convenient places for children, the elderly and also the disabled, especially people with limited moving space. The research will attempt in proposing design inception for the Fatahillah Square that is using inclusive user-centered design approach, while in the same time incorporate theoretical studies of children and elderly-design considerations. The first stage of this research was building inclusive design parameter; begin with a context-led research which assesses the quality of Fatahillah square through three basic components of urban space: hardware, software and orgware. The second stage of this research is to propose inclusive design inception for the Fatahillah square.

Evolutionary Optimization of a Geometrically Refined Truss

NASA Technical Reports Server (NTRS)

Hull, P. V.; Tinker, M. L.; Dozier, G. V.

2007-01-01

Structural optimization is a field of research that has experienced noteworthy growth for many years. Researchers in this area have developed optimization tools to successfully design and model structures, typically minimizing mass while maintaining certain deflection and stress constraints. Numerous optimization studies have been performed to minimize mass, deflection, and stress on a benchmark cantilever truss problem. Predominantly traditional optimization theory is applied to this problem. The cross-sectional area of each member is optimized to minimize the aforementioned objectives. This Technical Publication (TP) presents a structural optimization technique that has been previously applied to compliant mechanism design. This technique demonstrates a method that combines topology optimization, geometric refinement, finite element analysis, and two forms of evolutionary computation: genetic algorithms and differential evolution to successfully optimize a benchmark structural optimization problem. A nontraditional solution to the benchmark problem is presented in this TP, specifically a geometrically refined topological solution. The design process begins with an alternate control mesh formulation, multilevel geometric smoothing operation, and an elastostatic structural analysis. The design process is wrapped in an evolutionary computing optimization toolset.

Analysis of Variance in Statistical Image Processing

NASA Astrophysics Data System (ADS)

Kurz, Ludwik; Hafed Benteftifa, M.

1997-04-01

A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.

Crew coordination concepts: Continental Airlines CRM training

NASA Technical Reports Server (NTRS)

Christian, Darryl; Morgan, Alice

1987-01-01

The outline of the crew coordination concepts at Continental airlines is: (1) Present relevant theory: Contained in a pre-work package and in lecture/discussion form during the work course, (2) Discuss case examples: Contained in the pre-work for study and use during the course; and (3) Simulate practice problems: Introduced during the course as the beginning of an ongoing process. These concepts which are designed to address the problem pilots have in understanding the interaction between situations and their own theories of practice are briefly discussed.

Navy Irregular Warfare and Counterterrorism Operations: Background and Issues for Congress

DTIC Science & Technology

2015-09-25

practices in which suspects were sent to the U.S. detention facility at Guantanamo Bay, Cuba, or secret CIA prisons. The process ordinarily begins with...But prototype DCS mini-subs cannot fit inside the current shelter design. As a result , a modernization program will stretch the DDS units by 50...In June 2014, the SWCS program was re-baselined as a result of significant cost and schedule overruns. Less than a year after this re-baselining, the

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Raymond H.; Stone, James; Truax, Ryan

Batch tests, column tests, and predictive reactive transport modeling can be done before ISR begins as part of the decision making/permitting process by bracketing possible post-restoration conditions; Help address stakeholder concerns; The best predictions require actual restored groundwater in contact with the downgradient solid phase; Resulting modeling provides a range of natural attenuation rates and assists with designing the best locations and time frames for continued monitoring; Field pilot tests are the best field-scale data and can provide the best model input and calibration data

Space Weather: Historical and Contemporary Perspectives

NASA Astrophysics Data System (ADS)

Lanzerotti, Louis J.

2017-11-01

A somewhat personalized overview is presented of the effects of solar-terrestrial processes on electrical technologies, beginning with the electrical telegraphs in the mid-eighteenth century to the current era of extensive ground- and space-based commercial and governmental technical systems (including national security) upon which modern society depends. As human technologies increased in diversity over the last century and a half, space weather effects have continued to be of significant importance in the successful design and operations of many of these technologies.

Design of an airborne lidar for stratospheric aerosol measurements

NASA Technical Reports Server (NTRS)

Evans, W. E.

1977-01-01

A modular, multiple-telescope receiving concept is developed to gain a relatively large receiver collection aperture without requiring extensive modifications to the aircraft. This concept, together with the choice of a specific photodetector, signal processing, and data recording system capable of maintaining approximately 1% precision over the required large signal amplitude range, is found to be common to all of the options. It is recommended that development of the lidar begin by more detailed definition of solutions to these important common signal detection and recording problems.

Swell Propagation and Nearshore Wave Climate

DTIC Science & Technology

2001-01-01

and the impetus for this study was based on concerns with the lack of consistency utilized in the coastal engineering design process , beginning with...Valparaíso 06/07/79 10/12/79 105 m 1.70 14.7 02/05/81 08/13/81 105 m 01/06/00 29/09/00 110 m 2.00 12.1 06/04/01 27/08/01 135 m Constitucion ...reasonable degree of open exposure (Arica, Iquique, Valparaiso, Constitucion , Golfo Coronados). 3.2 Satellite Altimeter Measurements Satellite

DeMAID: A Design Manager's Aide for Intelligent Decomposition user's guide

NASA Technical Reports Server (NTRS)

Rogers, James L.

1989-01-01

A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, the couplings among modules and the presence of iterative loops is determined. This is important because the design manager must know how to group the modules into subsystems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information become available or as the design specifications change. The purpose of this research is to develop a knowledge-based tool called the Design Manager's Aide for Intelligent Decomposition (DeMAID) to act as an intelligent advisor for the design manager. DeMaid identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. DeMAID also provides the design manager with the capability of examining the trade-offs between sequential and parallel processing. This type of approach could lead to a substantial savings or organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams. This report serves as a User's Guide for the program.

From Ideal to Practice and Back Again: Beginning Teachers Teaching for Social Justice

ERIC Educational Resources Information Center

Agarwal, Ruchi; Epstein, Shira; Oppenheim, Rachel; Oyler, Celia; Sonu, Debbie

2010-01-01

The five authors of this article designed a multicase study to follow recent graduates of an elementary preservice teacher education program into their beginning teaching placements and explore the ways in which they enacted social justice curricula. The authors highlight the stories of three beginning teachers, honoring the plurality of their…

Hindering Factors of Beginning Teachers' High Performance in Higher Education Pakistan: Case Study of IUB

ERIC Educational Resources Information Center

Sarwar, Shakeel; Aslam, Hassan Danyal; Rasheed, Muhammad Imran

2012-01-01

Purpose: The aim of the researchers in this endeavor is to identify the challenges and obstacles faced by beginning teachers in higher education. This study also explores practical implications and what adaptation can be utilized in order to have high performance of the beginning teachers. Design/methodology/approach: Researchers have applied…

Inner Worlds and Outer Limits: The Formation of Beginning School Principals in Hong Kong

ERIC Educational Resources Information Center

Cheung, Robin Man-biu; Walker, Allan

2006-01-01

Purpose: This paper aims to contribute to one's understanding of how beginning principals in Hong Kong exercise leadership by exploring the concurrent influence of their inner worlds and the external contexts on their leadership within a reforming environment. Design/methodology/approach: Based on a study of the work lives of beginning principals…

33 CFR 156.300 - Designated lightering zones.

Code of Federal Regulations, 2010 CFR

2010-07-01

...′00″, and thence to the point of beginning. (NAD 83) (b) Gulfmex No. 2—lightering zone. This... thence to the point of beginning. (NAD 83) (c) Offshore Pascagoula No. 2—lightering zone. This lightering...″, 87°00′00″, and thence to the point of beginning. (NAD 83) (d) South Sabine Point—lightering zone...

Building Safer Systems With SpecTRM

NASA Technical Reports Server (NTRS)

2003-01-01

System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.

3S (Safeguards, Security, Safety) based pyroprocessing facility safety evaluation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ku, J.H.; Choung, W.M.; You, G.S.

The big advantage of pyroprocessing for the management of spent fuels against the conventional reprocessing technologies lies in its proliferation resistance since the pure plutonium cannot be separated from the spent fuel. The extracted materials can be directly used as metal fuel in a fast reactor, and pyroprocessing reduces drastically the volume and heat load of the spent fuel. KAERI has implemented the SBD (Safeguards-By-Design) concept in nuclear fuel cycle facilities. The goal of SBD is to integrate international safeguards into the entire facility design process since the very beginning of the design phase. This paper presents a safety evaluationmore » plan using a conceptual design of a reference pyroprocessing facility, in which 3S (Safeguards, Security, Safety)-By-Design (3SBD) concept is integrated from early conceptual design phase. The purpose of this paper is to establish an advanced pyroprocessing hot cell facility design concept based on 3SBD for the successful realization of pyroprocessing technology with enhanced safety and proliferation resistance.« less

Expanding lean thinking to the product and process design and development within the framework of sustainability

NASA Astrophysics Data System (ADS)

Sorli, M.; Sopelana, A.; Salgado, M.; Pelaez, G.; Ares, E.

2012-04-01

Companies require tools to change towards a new way of developing and producing innovative products to be manufactured considering the economic, social and environmental impact along the product life cycle. Based on translating Lean principles in Product Development (PD) from the design stage and, along the entire product life cycle, it is aimed to address both sustainability and environmental issues. The drivers of sustainable culture within a lean PD have been identified and a baseline for future research on the development of appropriate tools and techniques has been provided. This research provide industry with a framework which balance environmental and sustainable factors with lean principles to be considered and incorporated from the beginning of product design and development covering the entire product lifecycle.

The State of Professional Development for Teachers of Beginning Readers in Florida's Rural Schools

ERIC Educational Resources Information Center

Helvenston, Susan S.

2013-01-01

This study reviews the state of professional development (PD) for teachers of beginning readers in Florida's rural schools. Teachers of beginning readers need to have a deep understanding of language, of how the reading process develops, and of effective pedagogy in early literacy. Few teachers begin their careers with sufficient knowledge and…

Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scheib, J.; Pless, S.; Torcellini, P.

NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy usemore » requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.« less

Solidification of Savannah River plant high level waste

NASA Astrophysics Data System (ADS)

Maher, R.; Shafranek, L. F.; Kelley, J. A.; Zeyfang, R. W.

1981-11-01

Authorization for construction of the Defense Waste Processing Facility (DWPF) is expected in FY-83. The optimum time for stage 2 authorization is about three years later. Detailed design and construction will require approximately five years for stage 1, with stage 2 construction completed about two to three years later. Production of canisters of waste glass would begin in 1988, and the existing backlog of high level waste sludge stored at SRP would be worked off by about the year 2000. Stage 2 operation could begin in 1990. The technology and engineering are ready for construction and eventual operation of the DWPF for immobilizing high level radioactive waste at Savannah River Plant (SRP). Proceeding with this project will provide the public, and the leadership of this country, with a crucial demonstration that a major quanitity of existing high level nuclear wastes can be safely and permanently immobilized.

Extraction of Volatiles from Regolith or Soil on Mars, the Moon, and Asteroids

NASA Technical Reports Server (NTRS)

Linne, Diane; Kleinhenz, Julie; Trunek, Andrew; Hoffman, Stephen; Collins, Jacob

2017-01-01

NASA's Advanced Exploration Systems ISRU Technology Project is evaluating concepts to extract water from all resource types Near-term objectives: Produce high-fidelity mass, power, and volume estimates for mining and processing systems Identify critical challenges for development focus Begin demonstration of component and subsystem technologies in relevant environment Several processor types: Closed processors either partially or completely sealed during processing Open air processors operates at Mars ambient conditions In-situ processors Extract product directly without excavation of raw resource Design features Elimination of sweep gas reduces dust particles in water condensate Pressure maintained by height of soil in hopper Model developed to evaluate key design parameters Geometry: conveyor diameter, screw diameter, shaft diameter, flight spacing and pitch Operational: screw speed vs. screw length (residence time) Thermal: Heat flux, heat transfer to soil Testing to demonstrate feasibility and performance Agglomeration, clogging Pressure rise forced flow to condenser.

EHR Safety: The Way Forward to Safe and Effective Systems

PubMed Central

Walker, James M.; Carayon, Pascale; Leveson, Nancy; Paulus, Ronald A.; Tooker, John; Chin, Homer; Bothe, Albert; Stewart, Walter F.

2008-01-01

Diverse stakeholders—clinicians, researchers, business leaders, policy makers, and the public—have good reason to believe that the effective use of electronic health care records (EHRs) is essential to meaningful advances in health care quality and patient safety. However, several reports have documented the potential of EHRs to contribute to health care system flaws and patient harm. As organizations (including small hospitals and physician practices) with limited resources for care-process transformation, human-factors engineering, software safety, and project management begin to use EHRs, the chance of EHR-associated harm may increase. The authors propose a coordinated set of steps to advance the practice and theory of safe EHR design, implementation, and continuous improvement. These include setting EHR implementation in the context of health care process improvement, building safety into the specification and design of EHRs, safety testing and reporting, and rapid communication of EHR-related safety flaws and incidents. PMID:18308981

Improving Patients Experience in Peadiatric Emergency Waiting Room.

PubMed

Ehrler, Frederic; Siebert, Johan; Wipfli, Rolf; Duret, Cyrille; Gervaix, Alain; Lovis, Christian

2016-01-01

When visiting the emergency department, the perception of the time spent in the waiting room before the beginning of the care, may influence patients' experience. Based on models of service evaluation, highlighting the importance of informing people about their waiting process and their place in the queue, we have developed an innovative information screen aiming at improving perception of time by patients. Following an iterative process, a group of experts including computer scientists, ergonomists and caregivers designed a solution adapted to the pediatric context. The solution includes a screen displaying five lanes representing triage levels. Patients are represented by individual avatars, drawn sequentially in the appropriate line. The interface has been designed using gamification principle, aiming at increasing acceptance, lowering learning curve and improving satisfaction. Questionnaire based evaluation results revealed high satisfaction from the 278 respondents even if the informative content was not always completely clear.

Optimal design study of high efficiency indium phosphide space solar cells

NASA Technical Reports Server (NTRS)

Jain, Raj K.; Flood, Dennis J.

1990-01-01

Recently indium phosphide solar cells have achieved beginning of life AMO efficiencies in excess of 19 pct. at 25 C. The high efficiency prospects along with superb radiation tolerance make indium phosphide a leading material for space power requirements. To achieve cost effectiveness, practical cell efficiencies have to be raised to near theoretical limits and thin film indium phosphide cells need to be developed. The optimal design study is described of high efficiency indium phosphide solar cells for space power applications using the PC-1D computer program. It is shown that cells with efficiencies over 22 pct. AMO at 25 C could be fabricated by achieving proper material and process parameters. It is observed that further improvements in cell material and process parameters could lead to experimental cell efficiencies near theoretical limits. The effect of various emitter and base parameters on cell performance was studied.

Herpetological Monitoring Using a Pitfall Trapping Design in Southern California

USGS Publications Warehouse

Fisher, Robert; Stokes, Drew; Rochester, Carlton; Brehme, Cheryl; Hathaway, Stacie; Case, Ted

2008-01-01

The steps necessary to conduct a pitfall trapping survey for small terrestrial vertebrates are presented. Descriptions of the materials needed and the methods to build trapping equipment from raw materials are discussed. Recommended data collection techniques are given along with suggested data fields. Animal specimen processing procedures, including toe- and scale-clipping, are described for lizards, snakes, frogs, and salamanders. Methods are presented for conducting vegetation surveys that can be used to classify the environment associated with each pitfall trap array. Techniques for data storage and presentation are given based on commonly use computer applications. As with any study, much consideration should be given to the study design and methods before beginning any data collection effort.

A Survey of Usability Practices in Free/Libre/Open Source Software

NASA Astrophysics Data System (ADS)

Paul, Celeste Lyn

A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

Dance! Don't Fall - preventing falls and promoting exercise at home.

PubMed

Kerwin, Maureen; Nunes, Francisco; Silva, Paula Alexandra

2012-01-01

Falling is a serious danger to older adults that is usually only addressed after a person has fallen, when doctors administer clinical tests to determine the patient's risk of falling again. Having the technological capability of performing fall risk assessment tests with a smartphone, the authors set out to design a mobile application that would enable users to monitor their risk themselves and consequently prevent falls from occurring. The authors conducted a literature review and two observation sessions before beginning the iterative design process that resulted in the Dance! Don't Fall (DDF) game, a mobile application that enables users to both monitor their fall risk and actively reduce it through fun and easy exercise.

Terror in the Board Room: The Bid-Opening Process

ERIC Educational Resources Information Center

Shoop, James

2009-01-01

Competitive bids and the bid-opening process are the cornerstones of public school purchasing. The bid-opening process does not begin on the day of the bid opening. It begins with good planning by the purchasing agent to ensure that the advertised bid complies with the public school contracts law. In New Jersey, that raises the following…

A Developmental Approach to Graduate Education Review: A New Take on a Traditional Process

ERIC Educational Resources Information Center

Hakkola, Leah; King, Jean A.

2016-01-01

In this article we describe the Graduate Review and Improvement Process (GRIP), an innovative evaluation process that makes student input central, now beginning its fifth year of implementation at the University of Minnesota. We begin by contrasting GRIP with traditional graduate program review, and we then explain the conceptual underpinnings of…

Attention to Irregular Verbs by Beginning Learners of German: An Eye-Movement Study

ERIC Educational Resources Information Center

Schierloh, Maren

2011-01-01

In this study I examine the noticing of verbs with stem vowel changes by beginning adult learners of L2 German who have not been formally introduced to this linguistic feature. Two research questions (RQs) guided the experimental design and the empirical analyses in this study: (1) Do adult beginning learners of German who are unfamiliar with…

The promise and challenge of practice-research collaborations: Guiding principles and strategies for initiating, designing, and implementing program evaluation research.

PubMed

Secret, Mary; Abell, Melissa L; Berlin, Trey

2011-01-01

The authors present a set of guiding principles and strategies to facilitate the collaborative efforts of social work researchers and practitioners as they initiate, design, and implement outcome evaluations of human service interventions and programs. Beginning with an exploration of the interpersonal barriers to practice-research collaborations, and building on their experiences in successfully completing a community-based research evaluation, the authors identify specific relationship-focused principles and strategies and illustrate how these approaches can guide practice-research teams through the various sequential activities of the evaluation research process. In particular, it is suggested that practice-research collaborations can be formed, strengthened, and sustained by emphasis on a spirit of discovery and shared leadership at the start of the relationship, use of a comprehensive evaluation model to clarify and frame the evaluation and program goals, beginning where the client is when selecting research methodology and measurement tools, commitment to keeping the program first and recording everything during the implementation and data-collection stages, discussion of emerging findings and presentation of findings in graphic format at the data-analysis stage, and a total team approach at the dissemination stage.

KSC-97pc677

NASA Image and Video Library

1997-04-21

Workers begin unloading the Cassini orbiter from a U.S. Air Force C-17 air cargo plane after its arrival at KSC’s Shuttle Landing Facility from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004

Conceptual design assessment for the co-firing of bio-refinery supplied lignin project. Quarterly report, July 1--September 30, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglund, T.; Ranney, J.T.; Babb, C.L.

2000-10-01

The initial design criteria of the MSW to ethanol facility have been completed along with preliminary site identification and layouts for the processing facility. These items are the first step in evaluating the feasibility of this co-located facility. Pilot facility design and modification are underway for the production and dewatering of the lignin fuel. Major process equipment identification has been completed and several key unit operations will be accomplished on rental equipment. Equipment not available for rental or at TVA has been ordered and facility modification and shakedown will begin in October. The study of the interface and resulting impactsmore » on the TVA Colbert facility are underway. The TVA Colbert fossil plant is fully capable of providing a reliable steam supply for the proposed Masada waste processing facility. The preferred supply location in the Colbert steam cycle has been identified as have possible steam pipeline routes to the Colbert boundary. Additional analysis is underway to fully predict the impact of the steam supply on Colbert plant performance and to select a final steam pipeline route.« less

Hercules Single-Stage Reusable Vehicle (HSRV) Operating Base

NASA Technical Reports Server (NTRS)

Moon, Michael J.; McCleskey, Carey M.

2017-01-01

Conceptual design for the layout of lunar-planetary surface support systems remains an important area needing further master planning. This paper explores a structured approach to organize the layout of a Mars-based site equipped for routinely flying a human-scale reusable taxi system. The proposed Hercules Transportation System requires a surface support capability to sustain its routine, affordable, and dependable operation. The approach organizes a conceptual Hercules operating base through functional station sets. The station set approach will allow follow-on work to trade design approaches and consider technologies for more efficient flow of material, energy, and information at future Mars bases and settlements. The station set requirements at a Mars site point to specific capabilities needed. By drawing from specific Hercules design characteristics, the technology requirements for surface-based systems will come into greater focus. This paper begins a comprehensive process for documenting functional needs, architectural design methods, and analysis techniques necessary for follow-on concept studies.

Beyond formalism

NASA Technical Reports Server (NTRS)

Denning, Peter J.

1991-01-01

The ongoing debate over the role of formalism and formal specifications in software features many speakers with diverse positions. Yet, in the end, they share the conviction that the requirements of a software system can be unambiguously specified, that acceptable software is a product demonstrably meeting the specifications, and that the design process can be carried out with little interaction between designers and users once the specification has been agreed to. This conviction is part of a larger paradigm prevalent in American management thinking, which holds that organizations are systems that can be precisely specified and optimized. This paradigm, which traces historically to the works of Frederick Taylor in the early 1900s, is no longer sufficient for organizations and software systems today. In the domain of software, a new paradigm, called user-centered design, overcomes the limitations of pure formalism. Pioneered in Scandinavia, user-centered design is spreading through Europe and is beginning to make its way into the U.S.

Data Protection-Aware Design for Cloud Services

NASA Astrophysics Data System (ADS)

Creese, Sadie; Hopkins, Paul; Pearson, Siani; Shen, Yun

The Cloud is a relatively new concept and so it is unsurprising that the information assurance, data protection, network security and privacy concerns have yet to be fully addressed. This paper seeks to begin the process of designing data protection controls into clouds from the outset so as to avoid the costs associated with bolting on security as an afterthought. Our approach is firstly to consider cloud maturity from an enterprise level perspective, describing a novel capability maturity model. We use this model to explore privacy controls within an enterprise cloud deployment, and explore where there may be opportunities to design in data protection controls as exploitation of the Cloud matures. We demonstrate how we might enable such controls via the use of design patterns. Finally, we consider how Service Level Agreements (SLAs) might be used to ensure that third party suppliers act in support of such controls.

Effective Beginning Reading Programs: A Best-Evidence Synthesis

ERIC Educational Resources Information Center

Slavin, Robert E.; Lake, Cynthia; Chambers, Bette; Cheung, Alan; Davis, Susan

2009-01-01

This article systematically reviews research on the achievement outcomes of four types of approaches to improving the beginning reading success of children in kindergarten and first grade: Reading curricula, instructional technology, instructional process programs, and combinations of curricula and instructional process. Study inclusion criteria…

Architectural design of the science complex at Elizabeth City State University

NASA Technical Reports Server (NTRS)

Jahromi, Soheila

1993-01-01

This paper gives an overall view of the architectural design process and elements in taking an idea from conception to execution. The project presented is an example for this process. Once the need for a new structure is established, an architect studies the requirements, opinions and limits in creating a structure that people will exist in, move through, and use. Elements in designing a building include factors such as volume and surface, light and form changes of scale and view, movement and stasis. Some of the other factors are functions and physical conditions of construction. Based on experience, intuition, and boundaries, an architect will utilize all elements in creating a new building. In general, the design process begins with studying the spatial needs which develop into an architectural program. A comprehensive and accurate architectural program is essential for having a successful building. The most attractive building which does not meet the functional needs of its users has failed at the primary reason for its existence. To have a good program an architect must have a full understanding of the daily functions that will take place in the building. The architectural program along with site characteristics are among a few of the important guidelines in studying the form, adjacencies, and circulation for the structure itself and also in relation to the adjacent structures. Conceptual studies are part of the schematic design, which is the first milestone in the design process. The other reference points are design development and construction documents. At each milestone, review and coordination with all the consultants is established, and the user is essential in refining the project. In design development phase, conceptual diagrams take shape, and architectural, structural, mechanical, and electrical systems are developed. The final phase construction documents convey all the information required to construct the building. The design process and elements described were applied in the following project.

Experimental Approaches to Understanding Surficial Processes on Mars: The Stony Brook Experience 2000-2016

NASA Astrophysics Data System (ADS)

McLennan, S. M.; Dehouck, E.; Hurowitz, J.; Lindsley, D. H.; Schoonen, M. A.; Tosca, N. J.; Zhao, Y. Y. S.

2016-12-01

Starting with Pathfinder and Global Surveyor, recent missions to Mars have provided great opportunity for low-temperature experimental geochemistry investigations of the Martian sedimentary record by providing geochemical and mineralogical data that can be used as meaningful tests for experiments. These missions have documented a long-lived, complex and dynamic sedimentary rock cycle, including "source-to-sink" sedimentary systems and global paleoenvironmental transitions through time. We designed and constructed an experimental facility, beginning in 2000, specifically to evaluate surficial processes on Mars. Our experimental philosophy has been to (1) keep apparatus simple and flexible, and if feasible maintain sample access during experiments; (2) use starting materials (minerals, rocks) close to known Mars compositions (often requiring synthesis); (3) address sedimentary processes supported by geological investigations at Mars; (4) begin with experiments at standard conditions so they are best supported by thermodynamics; (5) support experiments with thermodynamic-kinetic-mass balance modeling in both design and interpretation, and by high quality chemical, mineralogical and textural lab analyses; (6) interpret results in the context of measurements made at Mars. Although eliciting much comment in proposal and manuscript reviews, we have not attempted to slavishly maintain "Mars conditions", doing so only to the degree required by variables being tested in any given experiments. Among the problems we have addressed are (1) Amazonian alteration of rock surfaces; (2) Noachian-Hesperian chemical weathering; (3) epithermal alteration of `evolved' igneous rocks; (4) mineral surface chemical reactivity from aeolian abrasion; (5) evaporation of mafic brines; (6) early diagenesis of sedimentary iron mineralogy; (7) trace element and halogen behavior during chemical weathering and diagenesis; (8) photochemical influences on halogen distribution and speciation; (9) post-depositional stability of sedimentary amorphous materials.

78 FR 40764 - Notice of Intent To Amend the California Desert Conservation Area Plan for the Needles Field...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... conveyed out of Federal ownership and by this notice is announcing the beginning of the scoping process to solicit public comments and identify issues. DATES: This notice initiates the public scoping process for... the 1980 CDCA Plan with an associated EA; announces the beginning of the scoping process; and seeks...

77 FR 60718 - Notice of Intent To Prepare an Amendment to the California Desert Conservation Area Plan and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

... BLM is announcing the beginning of the scoping process to solicit public comments and identify issues. DATES: This notice initiates the public scoping process for the plan amendment with an associated EA... amendment with an associated EA for the 1980 CDCA Plan, announces the beginning of the scoping process, and...

Use of sugarcane filter cake and nitrogen, phosphorus and potassium fertilization in the process of bioremediation of soil contaminated with diesel.

PubMed

Tellechea, Fernando Reynel Fundora; Martins, Marco Antônio; da Silva, Alexsandro Araujo; da Gama-Rodrigues, Emanuela Forestieri; Martins, Meire Lelis Leal

2016-09-01

This study evaluated the use of sugarcane filter cake and nitrogen, phosphorus and potassium (NPK) fertilization in the bioremediation of a soil contaminated with diesel fuel using a completely randomized design. Five treatments (uncontaminated soil, T1; soil contaminated with diesel, T2; soil contaminated with diesel and treated with 15 % (wt) filter cake, T3; soil contaminated with diesel and treated with NPK fertilizer, T4; and soil contaminated with diesel and treated with 15 % (wt) filter cake and NPK fertilizer, T5) and four evaluation periods (1, 60, 120, and 180 days after the beginning of the experiment) were used according to a 4 × 5 factorial design to analyze CO2 release. The variables total organic carbon (TOC) and total petroleum hydrocarbons (TPH) remaining in the soil were analyzed using a 5 × 2 factorial design, with the same treatments described above and two evaluation periods (1 and 180 days after the beginning of the experiment). In T3 and T5, CO2 release was significantly higher, compared with the other treatments. Significant TPH removal was observed on day 180, when percent removal values were 61.9, 70.1, 68.2, and 75.9 in treatments T2, T3, T4, and T5, respectively, compared with the initial value (T1).

Evaluation Design Recommendations for the Certified Community Behavioral Health Clinic Demonstration Program.

PubMed

Breslau, Joshua; Ashwood, J Scott; Kase, Courtney Ann; Pincus, Harold Alan; Lovejoy, Susan L

2017-06-01

This article provides information and recommendations regarding the evaluation design of the Certified Community Behavioral Health Clinic (CCBHC) demonstration. Mandated by Congress in Section 223 of the Protecting Access to Medicare Act of 2014, the CCBHC is a new model of specialty behavioral health clinic, designed to provide comprehensive and integrated care for adults with mental health or substance-use disorders and children with serious emotional distress. Certification criteria for the CCBHCs have been specified by Substance Abuse and Mental Health Services Administration covering six core areas: staffing; accessibility; care coordination; scope of services; quality and other reporting; and organizational authority, governance, and accreditation. In addition, services provided to Medicaid enrollees in CCBHCs will be reimbursed through one of two alternative prospective payment systems. At present, 24 states have been awarded grants to begin the planning process for implementing CCBHCs. Of these states, eight will be selected to participate in the demonstration project beginning in January 2017. Results from the evaluation will inform mandated reports to Congress over the two-year demonstration period and the three years following the end of the demonstration, providing information to policymakers on the program's impact and value. In addition, the results can inform the direction of future efforts at integration of behavioral health into the health care system at this critical time of transformation.

Quantitative Modeling of Earth Surface Processes

NASA Astrophysics Data System (ADS)

Pelletier, Jon D.

This textbook describes some of the most effective and straightforward quantitative techniques for modeling Earth surface processes. By emphasizing a core set of equations and solution techniques, the book presents state-of-the-art models currently employed in Earth surface process research, as well as a set of simple but practical research tools. Detailed case studies demonstrate application of the methods to a wide variety of processes including hillslope, fluvial, aeolian, glacial, tectonic, and climatic systems. Exercises at the end of each chapter begin with simple calculations and then progress to more sophisticated problems that require computer programming. All the necessary computer codes are available online at www.cambridge.org/9780521855976. Assuming some knowledge of calculus and basic programming experience, this quantitative textbook is designed for advanced geomorphology courses and as a reference book for professional researchers in Earth and planetary science looking for a quantitative approach to Earth surface processes.

KSC-03PD-2938

NASA Technical Reports Server (NTRS)

2003-01-01

VANDENBERG AIR FORCE BASE, CALIF. The SciSat-1 payload, with fairing installed and attached to its Pegasus launch vehicle, begins rollout to the hot pad and mating to the L-1011 carrier aircraft. The SciSat-1 weighs approximately 330 pounds and after launch will be placed in a 400-mile-high polar orbit to investigate processes that control the distribution of ozone in the upper atmosphere. The data from the satellite will provide Canadian and international scientists with improved measurements relating to global ozone processes and help policymakers assess existing environmental policy and develop protective measures for improving the health of our atmosphere, preventing further ozone depletion. The mission is designed to last two years.

Modeling Quantum Dynamics in Multidimensional Systems

NASA Astrophysics Data System (ADS)

Liss, Kyle; Weinacht, Thomas; Pearson, Brett

2017-04-01

Coupling between different degrees-of-freedom is an inherent aspect of dynamics in multidimensional quantum systems. As experiments and theory begin to tackle larger molecular structures and environments, models that account for vibrational and/or electronic couplings are essential for interpretation. Relevant processes include intramolecular vibrational relaxation, conical intersections, and system-bath coupling. We describe a set of simulations designed to model coupling processes in multidimensional molecular systems, focusing on models that provide insight and allow visualization of the dynamics. Undergraduates carried out much of the work as part of a senior research project. In addition to the pedagogical value, the simulations allow for comparison between both explicit and implicit treatments of a system's many degrees-of-freedom.

KSC-2010-4485

NASA Image and Video Library

2010-08-26

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers begin to offload an Alpha Magnetic Spectrometer, or AMS, section from an Air Force C-5M aircraft. A tractor-trailer will transport the AMS from the Shuttle Landing Facility runway to the Space Station Processing Facility, where it will be processed for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the International Space Station aboard space shuttle Endeavour's STS-134 mission, targeted to launch Feb. 26, 2011. Photo credit: NASA/Jack Pfaller

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

NASA's Deep Space 1 spacecraft waits in the Payload Hazardous Servicing Facility for prelaunch processing. Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

KSC-2010-4932

NASA Image and Video Library

2010-09-30

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the Alpha Magnetic Spectrometer (AMS) is being prepared for its move to a rotation stand to begin processing for flight. AMS, a state-of-the-art particle physics detector, is designed to operate as an external experiment on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the station aboard space shuttle Endeavour's STS-134 mission targeted to launch February, 2011. For more information visit: http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Jack Pfaller

On-line dimensional measurement of small components on the eyeglasses assembly line

NASA Astrophysics Data System (ADS)

Rosati, G.; Boschetti, G.; Biondi, A.; Rossi, A.

2009-03-01

Dimensional measurement of the subassemblies at the beginning of the assembly line is a very crucial process for the eyeglasses industry, since even small manufacturing errors of the components can lead to very visible defects on the final product. For this reason, all subcomponents of the eyeglass are verified before beginning the assembly process either with a 100% inspection or on a statistical basis. Inspection is usually performed by human operators, with high costs and a degree of repeatability which is not always satisfactory. This paper presents a novel on-line measuring system for dimensional verification of small metallic subassemblies for the eyeglasses industry. The machine vision system proposed, which was designed to be used at the beginning of the assembly line, could also be employed in the Statistical Process Control (SPC) by the manufacturer of the subassemblies. The automated system proposed is based on artificial vision, and exploits two CCD cameras and an anthropomorphic robot to inspect and manipulate the subcomponents of the eyeglass. Each component is recognized by the first camera in a quite large workspace, picked up by the robot and placed in the small vision field of the second camera which performs the measurement process. Finally, the part is palletized by the robot. The system can be easily taught by the operator by simply placing the template object in the vision field of the measurement camera (for dimensional data acquisition) and hence by instructing the robot via the Teaching Control Pendant within the vision field of the first camera (for pick-up transformation acquisition). The major problem we dealt with is that the shape and dimensions of the subassemblies can vary in a quite wide range, but different positioning of the same component can look very similar one to another. For this reason, a specific shape recognition procedure was developed. In the paper, the whole system is presented together with first experimental lab results.

Beginning Your "Vita Contemplativa"

ERIC Educational Resources Information Center

Bartunek, Jean M.

2007-01-01

In this article, I describe some of the topics intellectual autobiographies might include, summarize some of what I and others have said in intellectual autobiographies published in "Organization Studies", and invite readers to begin the process of constructing their own. To this end, I suggest some questions and a process readers might use.…

Early Childhood Classrooms and Computers: Programs with Promise.

ERIC Educational Resources Information Center

Hoot, James L.; Kimler, Michele

Word processing and the LOGO programing language are two microcomputer applications that are beginning to show benefits as learning tools in elementary school classrooms. Word processing packages are especially useful with beginning writers, whose lack of motor coordination often slows down their acquisition of competence in written communication.…

The beginning of human life

PubMed Central

2008-01-01

Introduction The Jewish religion is characterized by a strict association between faith and practical precept. Jewish law has two sections, the written and the oral tradition. The foundation of the written law and the origin of authority is the Torah, the first five books of the Scripture. It is an expression of God’s revelation, teaching and guiding humanity. The oral laws interpret, expand, and elucidate the written Torah and behavior patterns regulate new rules and customs. The main parts of the oral law are as follows: the Mishnah, the Talmud, Post-Talmudic Codes and. Responsa Literature. Discussion Life is a process that has a beginning and an end. The consensus about the time when human life really begins is still not reached among scientists, philosophers, ethicists, sociologists and theologizes. The scientific data suggested that a single developmental moment marking the beginning of human life does not exist. Current biological perspectives on when human life begins range through fertilization, gastrulation, to birth and even after. The development of a newborn is a smoothly continuous process. Results Procreation is acknowledged in the Bible to be the gift of God. The (Halachic) Jewish interpretation of when human life begins is extracted predominantly from procreation is acknowledged in the Bible to be the gift of God. The Jewish interpretation of when human life begins is extracted predominantly from The Halachic sources. The Bible does not make any other direct references regarding the beginning of human life. Conclusion While the Talmud gives the full status of humanness to a child at birth, the rabbinical writings have partially extended the acquisition of humanness to the 13th postnatal day of life for full-term infants. The Babylonian Talmud Yevamot 69b states that: “the embryo is considered to be mere water until the fortieth day.” Afterwards, it is considered subhuman until it is born. The issues of abortion, embryo research, multifetal reduction and cloning will be discussed according to Jewish Law perspectives. Life is a process that has a beginning and an end. The consensus about the time when human life really begins is still not reached among scientists, philosophers, ethicists, sociologists and theologizes. The scientific data suggested that a single developmental moment marking the beginning of human life does not exist. Current biological perspectives on when human life begins range through fertilization, gastrulation, to birth and even after. The development of a newborn is a smoothly continuous process. PMID:18551364

The beginning of human life : status of embryo. Perspectives in Halakha (Jewish Religious Law).

PubMed

Schenker, Joseph G

2008-06-01

The Jewish religion is characterized by a strict association between faith and practical precept. Jewish law has two sections, the written and the oral tradition. The foundation of the written law and the origin of authority is the Torah, the first five books of the Scripture. It is an expression of God's revelation, teaching and guiding humanity. The oral laws interpret, expand, and elucidate the written Torah and behavior patterns regulate new rules and customs. The main parts of the oral law are as follows: the Mishnah, the Talmud, Post-Talmudic Codes and. Responsa Literature. Life is a process that has a beginning and an end. The consensus about the time when human life really begins is still not reached among scientists, philosophers, ethicists, sociologists and theologizes. The scientific data suggested that a single developmental moment marking the beginning of human life does not exist. Current biological perspectives on when human life begins range through fertilization, gastrulation, to birth and even after. The development of a newborn is a smoothly continuous process. Procreation is acknowledged in the Bible to be the gift of God. The (Halachic) Jewish interpretation of when human life begins is extracted predominantly from procreation is acknowledged in the Bible to be the gift of God. The Jewish interpretation of when human life begins is extracted predominantly from The Halachic sources. The Bible does not make any other direct references regarding the beginning of human life. While the Talmud gives the full status of humanness to a child at birth, the rabbinical writings have partially extended the acquisition of humanness to the 13th postnatal day of life for full-term infants. The Babylonian Talmud Yevamot 69b states that: "the embryo is considered to be mere water until the fortieth day." Afterwards, it is considered subhuman until it is born. The issues of abortion, embryo research, multifetal reduction and cloning will be discussed according to Jewish Law perspectives. Life is a process that has a beginning and an end. The consensus about the time when human life really begins is still not reached among scientists, philosophers, ethicists, sociologists and theologizes. The scientific data suggested that a single developmental moment marking the beginning of human life does not exist. Current biological perspectives on when human life begins range through fertilization, gastrulation, to birth and even after. The development of a newborn is a smoothly continuous process.

Hawaiian Volcano Observatory seismic data, January to December 2005

USGS Publications Warehouse

Nakata, Jennifer S.

2006-01-01

The Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year. The seismic summary is offered without interpretation as a source of preliminary data. It is complete in the sense that most data for events of M-1.5 routinely gathered by the Observatory are included. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data dictated an annual publication beginning with Summary 74 for the year 1974. Summary 86 (the introduction of CUSP at HVO) includes a description of the seismic instrumentation, calibration, and processing used in recent years. Beginning with 2004, summaries will simply be identified by the year, rather than Summary number. The present summary includes background information on the seismic network and processing to allow use of the data and to provide an understanding of how they were gathered. A report by Klein and Koyanagi (1980) tabulates instrumentation, calibration, and recording history of each seismic station in the network. It is designed as a reference for users of seismograms and phase data and includes and augments the information in the station table in this summary.

Hawaiian Volcano Observatory Seismic Data, January to December 2006

USGS Publications Warehouse

Nakata, Jennifer

2007-01-01

Introduction The Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year. The seismic summary is offered without interpretation as a source of preliminary data. It is complete in the sense that most data for events of M>1.5 routinely gathered by the Observatory are included. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data dictated an annual publication beginning with Summary 74 for the year 1974. Summary 86 (the introduction of CUSP at HVO) includes a description of the seismic instrumentation, calibration, and processing used in recent years. Beginning with 2004, summaries are simply identified by the year, rather than Summary number. The present summary includes background information on the seismic network and processing to allow use of the data and to provide an understanding of how they were gathered. A report by Klein and Koyanagi (1980) tabulates instrumentation, calibration, and recording history of each seismic station in the network. It is designed as a reference for users of seismograms and phase data and includes and augments the information in the station table in this summary.

KSC-2009-2283

NASA Image and Video Library

2009-03-16

CAPE CANAVERAL, Fla. – At the Astrotech payload processing facility in Titusville, Fla., a technician checks the GOES-O satellite as it begins rotating on the stand. The latest Geostationary Operational Environmental Satellite, GOES-O was developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Once in orbit, GOES-O will be designated GOES-14, and NASA will provide on-orbit checkout and then transfer operational responsibility to NOAA. The GOES-O satellite is targeted to launch April 28 onboard a United Launch Alliance Delta IV expendable launch vehicle. Photo credit: NASA/Kim Shiflett

Advanced engineering software for in-space assembly and manned planetary spacecraft

NASA Technical Reports Server (NTRS)

Delaquil, Donald; Mah, Robert

1990-01-01

Meeting the objectives of the Lunar/Mars initiative to establish safe and cost-effective extraterrestrial bases requires an integrated software/hardware approach to operational definitions and systems implementation. This paper begins this process by taking a 'software-first' approach to systems design, for implementing specific mission scenarios in the domains of in-space assembly and operations of the manned Mars spacecraft. The technological barriers facing implementation of robust operational systems within these two domains are discussed, and preliminary software requirements and architectures that resolve these barriers are provided.

The Design of Fault Tolerant Quantum Dot Cellular Automata Based Logic

NASA Technical Reports Server (NTRS)

Armstrong, C. Duane; Humphreys, William M.; Fijany, Amir

2002-01-01

As transistor geometries are reduced, quantum effects begin to dominate device performance. At some point, transistors cease to have the properties that make them useful computational components. New computing elements must be developed in order to keep pace with Moore s Law. Quantum dot cellular automata (QCA) represent an alternative paradigm to transistor-based logic. QCA architectures that are robust to manufacturing tolerances and defects must be developed. We are developing software that allows the exploration of fault tolerant QCA gate architectures by automating the specification, simulation, analysis and documentation processes.

COBRA System Engineering Processes to Achieve SLI Strategic Goals

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2003-01-01

The COBRA Prototype Main Engine Development Project was an endeavor conducted as a joint venture between Pratt & Whitney and Aerojet to conduct risk reduction in LOX/LH2 main engine technology for the NASA Space Launch Initiative (SLI). During the seventeen months of the project (April 2001 to September 2002), approximately seventy reviews were conducted, beginning with the Engine Systems Requirements Review (SRR) and ending with the Engine Systems Interim Design Review (IDR). This paper discusses some of the system engineering practices used to support the reviews and the overall engine development effort.

Generative Representations for the Automated Design of Modular Physical Robots

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.; Lipson, Hod; Pollack, Jordan B.

2003-01-01

We will begin with a brief background of evolutionary robotics and related work, and demonstrate the scaling problem with our own prior results. Next we propose the use of an evolved generative representation as opposed to a non-generative representation. We describe this representation in detail as well as the evolutionary process that uses it. We then compare progress of evolved robots with and without the use of the grammar, and quantify the obtained advantage. Working two- dimensional and three-dimensional physical robots produced by the system are shown.

KSC-06pd0006

NASA Image and Video Library

2006-01-05

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility bay 3, technicians begin dismantling the fuel cell removed from the orbiter Discovery. Fuel cells are located under the forward portion of the payload bay. They make power for the orbiter by mixing hydrogen and oxygen to produce electricity. Fuel cells also create potable water that is pumped into storage tanks for the crew to use in orbit. Discovery is the designated orbiter for the second return-to-flight mission, STS-121, scheduled for launch in May. Photo credit: NASA/Kim Shiflett

An integrated optical CO2 sensor. Phase 0: Design and fabrication of critical elements

NASA Technical Reports Server (NTRS)

Murphy, Michael C.; Kelly, Kevin W.; Li, B. Q.; Ma, EN; Wang, Wanjun; Vladimirsky, Yuli; Vladimirsky, Olga

1994-01-01

Significant progress has been made toward all of the goals for the first phase of the project short of actual fabrication of a light path. Two alternative approaches to fabricating gold mirrors using the basic LIGA process were developed, one using electroplated solid gold mirrors and the second using gold plated over a nickel base. A new method of fabrication, the transfer mask process, was developed and demonstrated. Analysis of the projected surface roughness and beam divergence effects was completed. With gold surface with low surface roughness scattering losses are expected to be insignificant. Beam divergence due to diffraction will require a modification of the original design, but should be eliminated by fabricating mirrors 1000 mu m in height by 1000 mu m in width and using a source with an initial beam radius greater than 300 mu m. This may eliminate any need for focusing optics. Since the modified design does not affect the mask layout, ordering of the mask and fabrication of the test structures can begin immediately at the start of Phase 1.

The evolution of creationists in the United States: where are they now, and where are they going?

PubMed

Padian, Kevin

2009-01-01

The history of anti-evolutionism in the United States begins only in the early decades of the 20th century but has evolved considerably since then. Various versions of the movement ("equal time" for creationism, "creation science", "intelligent design") have developed over time, but they have made few positive contributions to serious discourse about science and religion. Their main goal has been to try to stop the teaching of evolution. The most recent version of creationism, "intelligent design" (ID), has little in common with William Paley's 18th-century version: ID posits an interventionist Deity who regularly interferes in natural processes to produce complex biological structures and functions. The 2005 "intelligent design" trial in Dover, Pennsylvania, destroyed any pretensions that the movement had to scientific integrity. However, anti-evolutionists continue to foment discord at local levels, where opposition to the teaching of evolution can be presented without strong resistance. Scientists can best demonstrate their concern by becoming involved in federal, state, and local administrative processes that determine curricula and develop and adopt textbooks and other instructional materials.

A Map for Clinical Laboratories Management Indicators in the Intelligent Dashboard

PubMed Central

Azadmanjir, Zahra; Torabi, Mashallah; Safdari, Reza; Bayat, Maryam; Golmahi, Fatemeh

2015-01-01

Introduction: management challenges of clinical laboratories are more complicated for educational hospital clinical laboratories. Managers can use tools of business intelligence (BI), such as information dashboards that provide the possibility of intelligent decision-making and problem solving about increasing income, reducing spending, utilization management and even improving quality. Critical phase of dashboard design is setting indicators and modeling causal relations between them. The paper describes the process of creating a map for laboratory dashboard. Methods: the study is one part of an action research that begins from 2012 by innovation initiative for implementing laboratory intelligent dashboard. Laboratories management problems were determined in educational hospitals by the brainstorming sessions. Then, with regard to the problems key performance indicators (KPIs) specified. Results: the map of indicators designed in form of three layered. They have a causal relationship so that issues measured in the subsequent layers affect issues measured in the prime layers. Conclusion: the proposed indicator map can be the base of performance monitoring. However, these indicators can be modified to improve during iterations of dashboard designing process. PMID:26483593

Psychological States and Working Conditions Buffer Beginning Teachers' Intention to Leave the Job

ERIC Educational Resources Information Center

De Neve, Debbie; Devos, Geert

2017-01-01

The high turnover rates of beginning teachers are an issue of continuing concern in education. However, little is known about the motivational process that encourages beginning teachers to stay in the teaching profession. This study investigated how working conditions (job insecurity, teacher autonomy, collective responsibility, reflective…

Design Approaches to Support Preservice Teachers in Scientific Modeling

NASA Astrophysics Data System (ADS)

Kenyon, Lisa; Davis, Elizabeth A.; Hug, Barbara

2011-02-01

Engaging children in scientific practices is hard for beginning teachers. One such scientific practice with which beginning teachers may have limited experience is scientific modeling. We have iteratively designed preservice teacher learning experiences and materials intended to help teachers achieve learning goals associated with scientific modeling. Our work has taken place across multiple years at three university sites, with preservice teachers focused on early childhood, elementary, and middle school teaching. Based on results from our empirical studies supporting these design decisions, we discuss design features of our modeling instruction in each iteration. Our results suggest some successes in supporting preservice teachers in engaging students in modeling practice. We propose design principles that can guide science teacher educators in incorporating modeling in teacher education.

KSC-2012-6405

NASA Image and Video Library

2012-09-20

CAPE CANAVERAL, Fla. -- At NASA’s Kennedy Space Center in Florida, a groundbreaking was held to mark the start of construction on the Antenna Test Bed Array for the Ka-Band Objects Observation and Monitoring, or Ka-BOOM system. Using ceremonial shovels to mark the site, from left are Michael Le, lead design engineer and construction manager Sue Vingris, Cape Design Engineer Co. project manager Kannan Rengarajan, chief executive officer of Cape Design Engineer Co. Lutfi Mized, president of Cape Design Engineer Co. David Roelandt, construction site superintendent with Cape Design Engineer Co. Marc Seibert, NASA project manager Michael Miller, NASA project manager Peter Aragona, KSC’s Electromagnetic Lab manager Stacy Hopper, KSCs master planning supervisor Dr. Bary Geldzabler, NASA chief scientist and KSC’s Chief Technologist Karen Thompson. The construction site is near the former Vertical Processing Facility, which has been demolished. Workers will begin construction on the pile foundations for the 40-foot-diameter dish antenna arrays and their associated utilities, and prepare the site for the operations command center facility. Photo credit: NASA/Charisse Nahser

KSC-2012-6404

NASA Image and Video Library

2012-09-20

CAPE CANAVERAL, Fla. -- At NASA’s Kennedy Space Center in Florida, a groundbreaking was held to mark the start of construction on the Antenna Test Bed Array for the Ka-Band Objects Observation and Monitoring, or Ka-BOOM system. Holding ceremonial shovels, from left are Michael Le, lead design engineer and construction manager Sue Vingris, Cape Design Engineer Co. project manager Kannan Rengarajan, chief executive officer of Cape Design Engineer Co. Lutfi Mized, president of Cape Design Engineer Co. David Roelandt, construction site superintendent with Cape Design Engineer Co. Marc Seibert, NASA project manager Michael Miller, NASA project manager Peter Aragona, KSC’s Electromagnetic Lab manager Stacy Hopper, KSCs master planning supervisor Dr. Bary Geldzabler, NASA chief scientist and KSC’s Chief Technologist Karen Thompson. The construction site is near the former Vertical Processing Facility, which has been demolished. Workers will begin construction on the pile foundations for the 40-foot-diameter dish antenna arrays and their associated utilities, and prepare the site for the operations command center facility. Photo credit: NASA/Charisse Nahser

Picture Archiving And Communication Systems (PACS): Introductory Systems Analysis Considerations

NASA Astrophysics Data System (ADS)

Hughes, Simon H. C.

1983-05-01

Two fundamental problems face any hospital or radiology department that is thinking about installing a Picture Archiving and Communications System (PACS). First, though the need for PACS already exists, much of the relevant technology is just beginning to be developed. Second, the requirements of each hospital are different, so that any attempts to market a single PACS design for use in large numbers of hospitals are likely to meet with the same problems as were experienced with general-purpose Hospital Information Systems. This paper outlines some of the decision processes involved in arriving at specifications for each module of a PACS and indicates design principles which should be followed in order to meet individual hospital requirements, while avoiding the danger of short-term systems obsolescence.

Design of experiments (DoE) in pharmaceutical development.

PubMed

N Politis, Stavros; Colombo, Paolo; Colombo, Gaia; M Rekkas, Dimitrios

2017-06-01

At the beginning of the twentieth century, Sir Ronald Fisher introduced the concept of applying statistical analysis during the planning stages of research rather than at the end of experimentation. When statistical thinking is applied from the design phase, it enables to build quality into the product, by adopting Deming's profound knowledge approach, comprising system thinking, variation understanding, theory of knowledge, and psychology. The pharmaceutical industry was late in adopting these paradigms, compared to other sectors. It heavily focused on blockbuster drugs, while formulation development was mainly performed by One Factor At a Time (OFAT) studies, rather than implementing Quality by Design (QbD) and modern engineering-based manufacturing methodologies. Among various mathematical modeling approaches, Design of Experiments (DoE) is extensively used for the implementation of QbD in both research and industrial settings. In QbD, product and process understanding is the key enabler of assuring quality in the final product. Knowledge is achieved by establishing models correlating the inputs with the outputs of the process. The mathematical relationships of the Critical Process Parameters (CPPs) and Material Attributes (CMAs) with the Critical Quality Attributes (CQAs) define the design space. Consequently, process understanding is well assured and rationally leads to a final product meeting the Quality Target Product Profile (QTPP). This review illustrates the principles of quality theory through the work of major contributors, the evolution of the QbD approach and the statistical toolset for its implementation. As such, DoE is presented in detail since it represents the first choice for rational pharmaceutical development.

Accuracy Quantification of the Loci-CHEM Code for Chamber Wall Heat Transfer in a GO2/GH2 Single Element Injector Model Problem

NASA Technical Reports Server (NTRS)

West, Jeff; Westra, Doug; Lin, Jeff; Tucker, Kevin

2006-01-01

A robust rocket engine combustor design and development process must include tools which can accurately predict the multi-dimensional thermal environments imposed on solid surfaces by the hot combustion products. Currently, empirical methods used in the design process are typically one dimensional and do not adequately account for the heat flux rise rate in the near-injector region of the chamber. Computational Fluid Dynamics holds promise to meet the design tool requirement, but requires accuracy quantification, or validation, before it can be confidently applied in the design process. This effort presents the beginning of such a validation process for the Loci-CHEM CFD code. The model problem examined here is a gaseous oxygen (GO2)/gaseous hydrogen (GH2) shear coaxial single element injector operating at a chamber pressure of 5.42 MPa. The GO2/GH2 propellant combination in this geometry represents one the simplest rocket model problems and is thus foundational to subsequent validation efforts for more complex injectors. Multiple steady state solutions have been produced with Loci-CHEM employing different hybrid grids and two-equation turbulence models. Iterative convergence for each solution is demonstrated via mass conservation, flow variable monitoring at discrete flow field locations as a function of solution iteration and overall residual performance. A baseline hybrid was used and then locally refined to demonstrate grid convergence. Solutions were obtained with three variations of the k-omega turbulence model.

Accuracy Quantification of the Loci-CHEM Code for Chamber Wall Heat Fluxes in a G02/GH2 Single Element Injector Model Problem

NASA Technical Reports Server (NTRS)

West, Jeff; Westra, Doug; Lin, Jeff; Tucker, Kevin

2006-01-01

A robust rocket engine combustor design and development process must include tools which can accurately predict the multi-dimensional thermal environments imposed on solid surfaces by the hot combustion products. Currently, empirical methods used in the design process are typically one dimensional and do not adequately account for the heat flux rise rate in the near-injector region of the chamber. Computational Fluid Dynamics holds promise to meet the design tool requirement, but requires accuracy quantification, or validation, before it can be confidently applied in the design process. This effort presents the beginning of such a validation process for the Loci- CHEM CPD code. The model problem examined here is a gaseous oxygen (GO2)/gaseous hydrogen (GH2) shear coaxial single element injector operating at a chamber pressure of 5.42 MPa. The GO2/GH2 propellant combination in this geometry represents one the simplest rocket model problems and is thus foundational to subsequent validation efforts for more complex injectors. Multiple steady state solutions have been produced with Loci-CHEM employing different hybrid grids and two-equation turbulence models. Iterative convergence for each solution is demonstrated via mass conservation, flow variable monitoring at discrete flow field locations as a function of solution iteration and overall residual performance. A baseline hybrid grid was used and then locally refined to demonstrate grid convergence. Solutions were also obtained with three variations of the k-omega turbulence model.

Modelling of teeth of a gear transmission for modern manufacturing technologies

NASA Astrophysics Data System (ADS)

Monica, Z.; Banaś, W.; Ćwikla, G.; Topolska, S.

2017-08-01

The technological process of manufacturing of gear wheels is influenced by many factors. It is designated depending on the type of material from which the gear is to be produced, its heat treatment parameters, the required accuracy, the geometrical form and the modifications of the tooth. Therefor the parameters selection process is not easy and moreover it is unambiguous. Another important stage of the technological process is the selection of appropriate tools to properly machine teeth in the operations of both roughing and finishing. In the presented work the focus is put first of all on modern production methods of gears using technologically advanced instruments in comparison with conventional tools. Conventional processing tools such as gear hobbing cutters or Fellows gear-shaper cutters are used from the beginning of the machines for the production of gear wheels. With the development of technology and the creation of CNC machines designated for machining of gears wheel it was also developed the manufacturing technology as well as the design knowledge concerning the technological tools. Leading manufacturers of cutting tools extended the range of tools designated for machining of gears on the so-called hobbing cutters with inserted cemented carbide tips. The same have be introduced to Fellows gear-shaper cutters. The results of tests show that is advantaged to use hobbing cutters with inserted cemented carbide tips for milling gear wheels with a high number of teeth, where the time gains are very high, in relation to the use of conventional milling cutters.

First Year Effects of Induction Arrangements on Beginning Teachers' Psychological Processes

ERIC Educational Resources Information Center

Helms-Lorenz, Michelle; Slof, Bert; van de Grift, Wim

2013-01-01

This study examined the (1) effects of a supportive program (i.e., induction arrangement) on beginning teachers' (BTs') psychological processes after a period of 1 year and (2) psychological paths of influence of the arrangement. Participants (56 Dutch secondary schools with 143 BTs) were randomly allocated to two conditions. Experimental schools…

The Relationship between Phonological and Auditory Processing and Brain Organization in Beginning Readers

ERIC Educational Resources Information Center

Pugh, Kenneth R.; Landi, Nicole; Preston, Jonathan L.; Mencl, W. Einar; Austin, Alison C.; Sibley, Daragh; Fulbright, Robert K.; Seidenberg, Mark S.; Grigorenko, Elena L.; Constable, R. Todd; Molfese, Peter; Frost, Stephen J.

2013-01-01

We employed brain-behavior analyses to explore the relationship between performance on tasks measuring phonological awareness, pseudoword decoding, and rapid auditory processing (all predictors of reading (dis)ability) and brain organization for print and speech in beginning readers. For print-related activation, we observed a shared set of…

X-Ray Backscatter Machine Support Frame

NASA Technical Reports Server (NTRS)

Cannon, Brooke

2010-01-01

This summer at Kennedy Space Center, I spent 10 weeks as an intern working at the Prototype Development Lab. During this time I learned about the design and machining done here at NASA. I became familiar with the process from where a design begins in Pro/Engineer and finishes at the hands of the machinists. As an intern I was given various small jobs to do and then one project of my own. My personal project was a job for the Applied Physics Lab; in their work they use an X-Ray Backscatter machine. Previously it was resting atop a temporary frame that limited the use of the machine. My job was to design a frame for the machine to rest upon that would allow a full range of sample sizes. The frame was required to support the machine and provide a strain relief for the cords attached to the machine as it moved in the x and y directions. Calculations also had to be done to be sure the design would be able to withstand any loads or outside sources of stress. After the calculations proved the design to be ready to withstand the requirements, the parts were ordered or fabricated, as required. This helped me understand the full process of jobs sent to the Prototype Development Lab.

Architecture for Integrated Medical Model Dynamic Probabilistic Risk Assessment

NASA Technical Reports Server (NTRS)

Jaworske, D. A.; Myers, J. G.; Goodenow, D.; Young, M.; Arellano, J. D.

2016-01-01

Probabilistic Risk Assessment (PRA) is a modeling tool used to predict potential outcomes of a complex system based on a statistical understanding of many initiating events. Utilizing a Monte Carlo method, thousands of instances of the model are considered and outcomes are collected. PRA is considered static, utilizing probabilities alone to calculate outcomes. Dynamic Probabilistic Risk Assessment (dPRA) is an advanced concept where modeling predicts the outcomes of a complex system based not only on the probabilities of many initiating events, but also on a progression of dependencies brought about by progressing down a time line. Events are placed in a single time line, adding each event to a queue, as managed by a planner. Progression down the time line is guided by rules, as managed by a scheduler. The recently developed Integrated Medical Model (IMM) summarizes astronaut health as governed by the probabilities of medical events and mitigation strategies. Managing the software architecture process provides a systematic means of creating, documenting, and communicating a software design early in the development process. The software architecture process begins with establishing requirements and the design is then derived from the requirements.

Design for validation: An approach to systems validation

NASA Technical Reports Server (NTRS)

Carter, William C.; Dunham, Janet R.; Laprie, Jean-Claude; Williams, Thomas; Howden, William; Smith, Brian; Lewis, Carl M. (Editor)

1989-01-01

Every complex system built is validated in some manner. Computer validation begins with review of the system design. As systems became too complicated for one person to review, validation began to rely on the application of adhoc methods by many individuals. As the cost of the changes mounted and the expense of failure increased, more organized procedures became essential. Attempts at devising and carrying out those procedures showed that validation is indeed a difficult technical problem. The successful transformation of the validation process into a systematic series of formally sound, integrated steps is necessary if the liability inherent in the future digita-system-based avionic and space systems is to be minimized. A suggested framework and timetable for the transformtion are presented. Basic working definitions of two pivotal ideas (validation and system life-cyle) are provided and show how the two concepts interact. Many examples are given of past and present validation activities by NASA and others. A conceptual framework is presented for the validation process. Finally, important areas are listed for ongoing development of the validation process at NASA Langley Research Center.

SETI prototype system for NASA's Sky Survey microwave observing project - A progress report

NASA Technical Reports Server (NTRS)

Klein, M. J.; Gulkis, S.; Wilck, H. C.

1990-01-01

Two complementary search strategies, a Targeted Search and a Sky Survey, are part of NASA's SETI microwave observing project scheduled to begin in October of 1992. The current progress in the development of hardware and software elements of the JPL Sky Survey data processing system are presented. While the Targeted Search stresses sensitivity allowing the detection of either continuous or pulsed signals over the 1-3 GHz frequency range, the Sky Survey gives up sensitivity to survey the 99 percent of the sky that is not covered by the Targeted Search. The Sky Survey spans a larger frequency range from 1-10 GHz. The two searches will deploy special-purpose digital signal processing equipment designed and built to automate the observing and data processing activities. A two-million channel digital wideband spectrum analyzer and a signal processor system will serve as a prototype for the SETI Sky Survey processor. The design will permit future expansion to meet the SETI requirement that the processor concurrently search for left and right circularly polarized signals.

Improvements in Cz silicon PV module manufacturing

NASA Astrophysics Data System (ADS)

King, Richard R.; Mitchell, Kim W.; Jester, Theresa L.

1997-02-01

Work focused on reducing the cost per watt of Cz Si photovoltaic modules under Phase I of Siemens Solar Industries' DOE/NREL PVMaT 4A subcontract is described. Module cost components are analyzed and solutions to high-cost items are discussed in terms of specific module designs. The approaches of using larger cells and modules to reduce per-part processing cost, and of minimizing yield loss are particularly leveraging. Yield components for various parts of the fabrication process and various types of defects are shown, and measurements of the force required to break wafers throughout the cell fabrication sequence are given. The most significant type of yield loss is mechanical breakage. The implementation of statistical process control on key manufacturing processes at Siemens Solar Industries is described. Module configurations prototyped during Phase I of this project and scheduled to begin production in Phase II have a projected cost per watt reduction of 19%.

A Longitudinal Study on Predictors of Early Calculation Development among Young Children At-Risk for Learning Difficulties

PubMed Central

Peng, Peng; Namkung, Jessica M.; Fuchs, Douglas; Fuchs, Lynn S.; Patton, Samuel; Yen, Loulee; Compton, Donald L.; Zhang, Wenjuan; Miller, Amanda; Hamlett, Carol

2016-01-01

The purpose of this study was to explore domain-general cognitive skills, domain-specific academic skills, and demographic characteristics that are associated with calculation development from first through third grade among young children with learning difficulties. Participants were 176 children identified with reading and mathematics difficulties at the beginning of first grade. Data were collected on working memory, language, nonverbal reasoning, processing speed, decoding, numerical competence, incoming calculations, socioeconomic status, and gender at the beginning of first grade and on calculation performance at 4 time points: the beginning of first grade, the end of first grade, the end of second grade, and the end of third grade. Latent growth modelling analysis showed that numerical competence, incoming calculation, processing speed, and decoding skills significantly explained the variance of calculation performance at the beginning of first grade. Numerical competence and processing speed significantly explained the variance of calculation performance at the end of third grade. However, numerical competence was the only significant predictor of calculation development from the beginning of first grade to the end of third grade. Implications of these findings for early calculation instructions among young at-risk children are discussed. PMID:27572520

Excellent Beginnings: Evaluation of Phase I (1991-1994).

ERIC Educational Resources Information Center

Brickman, Alan

In 1991 the Plan for Social Excellence, Inc., funded three elementary schools to design and implement a comprehensive early childhood education program. This funding initiative, entitled "Excellent Beginnings," supports programs that include innovative curriculum and classroom-management strategies, extensive parent participation, the use of high…

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2010 CFR

2010-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2011 CFR

2011-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2013 CFR

2013-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2014 CFR

2014-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2012 CFR

2012-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

Silicon solar cell efficiency improvement: Status and outlook

NASA Technical Reports Server (NTRS)

Wolf, M.

1985-01-01

Efficiency and operating life is an economic attribute in silicon solar cells application. The efficiency improvements made during the 30 year existence of the silicon solar cells, from about 6% efficiency at the beginning to 19% in the most recent experimental cells is illustrated. In the more stationary periods, the effort was oriented towards improving radiation resistance and yields on the production lines, while, in other periods, the emphasis was on reaching new levels of efficiency through better cell design and improved material processing. First results were forthcoming from the recent efforts. Considerably more efficiency advancement in silicon solar cells is expected, and the anticipated attainment of efficiencies significantly above 20% is discussed. Major advances in material processing and in the resulting material perfection are required.

KSC-2010-4486

NASA Image and Video Library

2010-08-26

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers begin to offload a section of the Alpha Magnetic Spectrometer, or AMS, from an Air Force C-5M aircraft. A tractor-trailer will transport the AMS from the Shuttle Landing Facility runway to the Space Station Processing Facility, where it will be processed for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the International Space Station aboard space shuttle Endeavour's STS-134 mission, targeted to launch Feb. 26, 2011. Photo credit: NASA/Jack Pfaller

KSC-2010-4489

NASA Image and Video Library

2010-08-26

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, workers begin to offload the next section of the Alpha Magnetic Spectrometer, or AMS, from an Air Force C-5M aircraft. A tractor-trailer will transport the AMS from the Shuttle Landing Facility runway to the Space Station Processing Facility, where it will be processed for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. AMS will fly to the International Space Station aboard space shuttle Endeavour's STS-134 mission, targeted to launch Feb. 26, 2011. Photo credit: NASA/Jack Pfaller

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

Wearing special protective suits, workers ready NASA's Deep Space 1 spacecraft for prelaunch processing in the Payload Hazardous Servicing Facility at KSC. Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

Wearing special protective suits, workers look over NASA's Deep Space 1 spacecraft before prelaunch processing in the Payload Hazardous Servicing Facility at KSC. Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

Wearing special protective suits, workers maneuver NASA's Deep Space 1 spacecraft into place for prelaunch processing in the Payload Hazardous Servicing Facility at KSC. Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

Wearing special protective suits, workers move NASA's Deep Space 1 spacecraft into another room in the Payload Hazardous Servicing Facility for prelaunch processing . Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

The NOAA Satellite Observing System Architecture Study

NASA Technical Reports Server (NTRS)

Volz, Stephen; Maier, Mark; Di Pietro, David

2016-01-01

NOAA is beginning a study, the NOAA Satellite Observing System Architecture (NSOSA) study, to plan for the future operational environmental satellite system that will follow GOES and JPSS, beginning about 2030. This is an opportunity to design a modern architecture with no pre-conceived notions regarding instruments, platforms, orbits, etc. The NSOSA study will develop and evaluate architecture alternatives to include partner and commercial alternatives that are likely to become available. The objectives will include both functional needs and strategic characteristics (e.g., flexibility, responsiveness, sustainability). Part of this study is the Space Platform Requirements Working Group (SPRWG), which is being commissioned by NESDIS. The SPRWG is charged to assess new or existing user needs and to provide relative priorities for observational needs in the context of the future architecture. SPRWG results will serve as input to the process for new foundational (Level 0 and Level 1) requirements for the next generation of NOAA satellites that follow the GOES-R, JPSS, DSCOVR, Jason-3, and COSMIC-2 missions.

A Comparison of the Inservice Education Needs of Two Cohorts of Beginning Minnesota Agricultural Education Teachers.

ERIC Educational Resources Information Center

Joerger, Richard M.

2002-01-01

Beginning secondary/middle school agriculture teachers (n=42) identified desired inservice education topics: advisory committees; student management, guidance, and motivation; establishing support organizations; integration of agricultural technology; the relationship between agriculture and environment; program design; and classroom management.…

Beginning Teacher Handbook. Occupational Specialist I, II, III.

ERIC Educational Resources Information Center

Indiana State Univ., Terre Haute. School of Technology.

This handbook is designed to familiarize the beginning secondary vocational teacher with the legal requirements and guidelines for the Indiana assistantship program for vocational teacher licensing and to assist that teacher in satisfactorily completing the assistantship. The handbook includes a discussion of the features of the occupational…

Warpage investigation on side arms using response surface methodology (RSM) and glow-worm swarm optimizations (GSO)

NASA Astrophysics Data System (ADS)

Sow, C. K.; Fathullah, M.; Nasir, S. M.; Shayfull, Z.; Shazzuan, S.

2017-09-01

This paper discusses on an analysis run via injection moulding process in determination of the optimum processing parameters used for manufacturing side arms of catheters in minimizing the warpage issues. The optimization method used was RSM. Moreover, in this research tries to find the most significant factor affecting the warpage. From the previous literature review,4 most significant parameters on warpage defect was selected. Those parameters were melt temperature, packing time, packing pressure, mould temperature and cooling time. At the beginning, side arm was drawn using software of CATIA V5. Then, software Mouldflow and Design Expert were employed to analyses on the popular warpage issues. After that, GSO artificial intelligence was apply using the mathematical model from Design Expert for more optimization on RSM result. Recommended parameter settings from the simulation work were then compared with the optimization work of RSM and GSO. The result show that the warpage on the side arm was improved by 3.27 %

Introduction to the Navigation Team: Johnson Space Center EG6 Internship

NASA Technical Reports Server (NTRS)

Gualdoni, Matthew

2017-01-01

The EG6 navigation team at NASA Johnson Space Center, like any team of engineers, interacts with the engineering process from beginning to end; from exploring solutions to a problem, to prototyping and studying the implementations, all the way to polishing and verifying a final flight-ready design. This summer, I was privileged enough to gain exposure to each of these processes, while also getting to truly experience working within a team of engineers. My summer can be broken up into three projects: i) Initial study and prototyping: investigating a manual navigation method that can be utilized onboard Orion in the event of catastrophic failure of navigation systems; ii) Finalizing and verifying code: altering a software routine to improve its robustness and reliability, as well as designing unit tests to verify its performance; and iii) Development of testing equipment: assisting in developing and integrating of a high-fidelity testbed to verify the performance of software and hardware.

Does Burnout Begin with Student-Teaching? Analyzing Efficacy, Burnout, and Support during the Student-Teaching Semester

ERIC Educational Resources Information Center

Fives, Helenrose; Hamman, Doug; Olivarez, Arturo

2007-01-01

The burnout process may begin as early as the student-teaching experience [Gold, Y., 1985. Does teacher burnout begin with student teaching? "Education", 105, 254-257]. Data from 49 student-teachers in the southwest United States were gathered twice during their student-teaching practicum. Data assessing teacher efficacy, teacher…

Beginning Teachers' Self-Efficacy and Stress and the Supposed Effects of Induction Arrangements

ERIC Educational Resources Information Center

Helms-Lorenz, Michelle; Slof, Bert; Vermue, Carlien E.; Canrinus, Esther T.

2012-01-01

Induction arrangements are implemented in schools all over the world to support beginning teachers (BTs) (novices) in gradually growing into their profession. The aim of this study is to gain more insight into two key psychological processes involved in the work of a qualified beginning teacher, namely perceived stress and self-efficacy. This…

The Challenge of Supporting a Beginning Teacher to Plan in Primary Mathematics

ERIC Educational Resources Information Center

Bailey, Judy

2015-01-01

Effective lesson planning is a real challenge for many beginning teachers. This paper presents a case study of one such teacher, and the author's efforts to support her in the planning process. Results show supporting the beginning teacher's planning by (a) providing access to resources such as web-sites and teaching handbooks, (b) modelling, and…

Research on photodiode detector-based spatial transient light detection and processing system

NASA Astrophysics Data System (ADS)

Liu, Meiying; Wang, Hu; Liu, Yang; Zhao, Hui; Nan, Meng

2016-10-01

In order to realize real-time signal identification and processing of spatial transient light, the features and the energy of the captured target light signal are first described and quantitatively calculated. Considering that the transient light signal has random occurrence, a short duration and an evident beginning and ending, a photodiode detector based spatial transient light detection and processing system is proposed and designed in this paper. This system has a large field of view and is used to realize non-imaging energy detection of random, transient and weak point target under complex background of spatial environment. Weak signal extraction under strong background is difficult. In this paper, considering that the background signal changes slowly and the target signal changes quickly, filter is adopted for signal's background subtraction. A variable speed sampling is realized by the way of sampling data points with a gradually increased interval. The two dilemmas that real-time processing of large amount of data and power consumption required by the large amount of data needed to be stored are solved. The test results with self-made simulative signal demonstrate the effectiveness of the design scheme. The practical system could be operated reliably. The detection and processing of the target signal under the strong sunlight background was realized. The results indicate that the system can realize real-time detection of target signal's characteristic waveform and monitor the system working parameters. The prototype design could be used in a variety of engineering applications.

Designers' models of the human-computer interface

NASA Technical Reports Server (NTRS)

Gillan, Douglas J.; Breedin, Sarah D.

1993-01-01

Understanding design models of the human-computer interface (HCI) may produce two types of benefits. First, interface development often requires input from two different types of experts: human factors specialists and software developers. Given the differences in their backgrounds and roles, human factors specialists and software developers may have different cognitive models of the HCI. Yet, they have to communicate about the interface as part of the design process. If they have different models, their interactions are likely to involve a certain amount of miscommunication. Second, the design process in general is likely to be guided by designers' cognitive models of the HCI, as well as by their knowledge of the user, tasks, and system. Designers do not start with a blank slate; rather they begin with a general model of the object they are designing. The author's approach to a design model of the HCI was to have three groups make judgments of categorical similarity about the components of an interface: human factors specialists with HCI design experience, software developers with HCI design experience, and a baseline group of computer users with no experience in HCI design. The components of the user interface included both display components such as windows, text, and graphics, and user interaction concepts, such as command language, editing, and help. The judgments of the three groups were analyzed using hierarchical cluster analysis and Pathfinder. These methods indicated, respectively, how the groups categorized the concepts, and network representations of the concepts for each group. The Pathfinder analysis provides greater information about local, pairwise relations among concepts, whereas the cluster analysis shows global, categorical relations to a greater extent.

Transit safety retrofit package development : architecture and design specifications.

DOT National Transportation Integrated Search

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical objectives stated in the TRP requirements document. The document begins with an architectural overview that identifies and describes...

Finite element analysis of high aspect ratio wind tunnel wing model: A parametric study

NASA Astrophysics Data System (ADS)

Rosly, N. A.; Harmin, M. Y.

2017-12-01

Procedure for designing the wind tunnel model of a high aspect ratio (HAR) wing containing geometric nonlinearities is described in this paper. The design process begins with identification of basic features of the HAR wing as well as its design constraints. This enables the design space to be narrowed down and consequently, brings ease of convergence towards the design solution. Parametric studies in terms of the spar thickness, the span length and the store diameter are performed using finite element analysis for both undeformed and deformed cases, which respectively demonstrate the linear and nonlinear conditions. Two main criteria are accounted for in the selection of the wing design: the static deflections due to gravitational loading should be within the allowable margin of the size of the wind tunnel test section and the flutter speed of the wing should be much below the maximum speed of the wind tunnel. The findings show that the wing experiences a stiffness hardening effect under the nonlinear static solution and the presence of the store enables significant reduction in linear flutter speed.

The cognitive science of visual-spatial displays: implications for design.

PubMed

Hegarty, Mary

2011-07-01

This paper reviews cognitive science perspectives on the design of visual-spatial displays and introduces the other papers in this topic. It begins by classifying different types of visual-spatial displays, followed by a discussion of ways in which visual-spatial displays augment cognition and an overview of the perceptual and cognitive processes involved in using displays. The paper then argues for the importance of cognitive science methods to the design of visual displays and reviews some of the main principles of display design that have emerged from these approaches to date. Cognitive scientists have had good success in characterizing the performance of well-defined tasks with relatively simple visual displays, but many challenges remain in understanding the use of complex displays for ill-defined tasks. Current research exemplified by the papers in this topic extends empirical approaches to new displays and domains, informs the development of general principles of graphic design, and addresses current challenges in display design raised by the recent explosion in availability of complex data sets and new technologies for visualizing and interacting with these data. Copyright © 2011 Cognitive Science Society, Inc.

Two Theories of Design and Instructional Design.

ERIC Educational Resources Information Center

Tripp, Steven D.

This paper address three questions: (1) What is the nature of design? (2) How do skilled designers function? and (3) Can a theory of design be constructed which will allow novice and expert instructional designers to perform their tasks more efficiently and effectively? It begins by presenting two general theories of design: Simon's conception of…

The Ohio Cross-Cultural Tobacco Control Alliance: Understanding and Eliminating Tobacco-Related Disparities Through the Integration of Science, Practice, and Policy

PubMed Central

Adhikari, Surendra B.; Clopton, Tracy M.; Oches, Barry; Jensen, Conrado

2010-01-01

Objectives. We examined the development of a process designed to eliminate tobacco-related disparities in the state of Ohio and described how a cross-cultural work group used a multicomponent community planning process to develop capacity to address such disparities. Methods. The community development model was used as a guide in the planning process. We employed a case study, focus groups, and telephone interviews to assess the process and collect data on tobacco use and awareness. We also employed the appreciative inquiry framework to create the organizational design for the Ohio Cross-Cultural Tobacco Control Alliance (CCTCA), which was formed from the cross-cultural work group and charged with addressing tobacco-related disparities in the state. Results. Data on tobacco use and awareness were collected from 13 underserved populations. At the end of the planning process, the CCTCA was initiated along with structural capacity to serve as a new program incubator highlighting tobacco use and awareness levels in these populations. Conclusions. The CCTCA appeared to be an effective way to begin mobilizing agencies serving underserved populations by providing an operational structure to address tobacco-related disparities. The alliance also successfully implemented culturally competent community-based programs and policies to help eliminate disparities. PMID:20147668

Engineering design: A cognitive process approach

NASA Astrophysics Data System (ADS)

Strimel, Greg Joseph

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. Therefore, Research Objective 1 was to identify the fundamental cognitive processes students use to design, construct, and evaluate operational solutions to engineering design problems. Research Objective 2 was to determine identifiers within student cognitive processes for monitoring aptitude to successfully design, construct, and evaluate technological solutions. Lastly, Research Objective 3 was to create a conceptual technological and engineering problem-solving model integrating student cognitive processes for the improved development of problem-solving abilities. The methodology of this study included multiple forms of data collection. The participants were first given a survey to determine their prior experience with engineering and to provide a description of the subjects being studied. The participants were then presented an engineering design challenge to solve individually. While they completed the challenge, the participants verbalized their thoughts using an established "think aloud" method. These verbalizations were captured along with participant observational recordings using point-of-view camera technology. Additionally, the participant design journals, design artifacts, solution effectiveness data, and teacher evaluations were collected for analysis to help achieve the research objectives of this study. Two independent coders then coded the video/audio recordings and the additional design data using Halfin's (1973) 17 mental processes for technological problem-solving. The results of this study indicated that the participants employed a wide array of mental processes when solving engineering design challenges. However, the findings provide a general analysis of the number of times participants employed each mental process, as well as the amount of time consumed employing the various mental processes through the different stages of the engineering design process. The results indicated many similarities between the students solving the problem, which may highlight voids in current technology and engineering education curricula. Additionally, the findings showed differences between the processes employed by participants that created the most successful solutions and the participants who developed the least effective solutions. Upon comparing and contrasting these processes, recommendations for instructional strategies to enhance a student's capability for solving engineering design problems were developed. The results also indicated that students, when left without teacher intervention, use a simplified and more natural process to solve design challenges than the 12-step engineering design process reported in much of the literature. Lastly, these data indicated that students followed two different approaches to solving the design problem. Some students employed a sequential and logical approach, while others employed a nebulous, solution centered trial-and-error approach to solving the problem. In this study the participants who were more sequential had better performing solutions. Examining these two approaches and the student cognition data enabled the researcher to generate a conceptual engineering design model for the improved teaching and development of engineering design problem solving.

Beginning science teachers' performances: Assessment in times of reform

NASA Astrophysics Data System (ADS)

Budzinsky, Fie K.

2000-10-01

The current reform in science education and the research on effective teaching and student learning have reinforced the importance of teacher competency. To better measure performances in the teaching of science, performance assessment has been added to Connecticut's licensure process for beginning science teachers. Teaching portfolios are used to document teaching and learning over time. Portfolios, however, are not without problems. One of the major concerns with the portfolio assessment process is its subjectivity. Assessors may not have opportunities to ask clarifying or follow-up questions to enhance the interpretation of a teacher's performance. In addition, portfolios often contain components based on self-documentation, which are subjective. Furthermore, the use of portfolios raises test equity issues. These concerns present challenges for persons in charge of establishing the validity of a portfolio-based licensure process. In high-stakes decision processes, such as teaching licensure, the validity of the assessment instruments must be studied. The primary purpose of this study was to explore the criterion-related validity of the Connecticut State Department of Education's Beginning Science Teaching Portfolio by comparing the interpretations of performances from science teaching portfolios to those derived from another assessment method, the Expert Science Teaching Educational and Evaluation Model, (ESTEEM). The analysis of correlations between the Beginning Science Teaching Portfolio and ESTEEM instrument scores was the primary method for establishing support for validity. The results indicated moderate correlations between all Beginning Science Teaching Portfolio and ESTEEM category and total variables. Multiple regression was used to examine whether differences existed in beginning science teachers' performances based on gender, poverty group, school level, and science discipline taught. None of these variables significantly contributed to the explanation of variance in the ESTEEM (p > .05), but poverty group and gender were significant predictors of portfolio performances, accounting for 21% of the total variance. Finally, data from interviews, written surveys, and beginning teacher attendance records at state-supported seminars were analyzed qualitatively and quantitatively. This information provided insight about the quality and quantity of support beginning science teachers received in their efforts to document, via the science teaching portfolio, their abilities to implement the Connecticut Professional Science Teaching Standards.

Structure, Impact, and Deficiencies of Beginning Counselor Educators' Doctoral Teaching Preparation

ERIC Educational Resources Information Center

Waalkes, Phillip L.; Benshoff, James M.; Stickl, Jaimie; Swindle, Paula J.; Umstead, Lindsey K.

2018-01-01

The authors utilized the consensual qualitative research method (Hill, Thompson, & Williams, [Hill, C. E., 1997]) to explore beginning counselor educators' (N = 9) experiences of doctoral teaching preparation, including helpful and missing components. Emerging themes included a lack of intentionality in teaching-related program design and a…

Examining Beginning Teachers' Perceptions of Workplace Support

ERIC Educational Resources Information Center

Fox, Alison; Deaney, Rosemary; Wilson, Elaine

2010-01-01

Purpose: This paper, taking a participatory perspective of learning, seeks to look at the interaction between individuals and their workplace, focusing on the perceptions of workplaces and self by beginning teachers in terms of support for their learning. Design/methodology/approach: The study presents an analysis of 37 interviews from 17…

Job Satisfaction and Career Persistence of Beginning Teachers

ERIC Educational Resources Information Center

Mau, Wei-Cheng J.; Ellsworth, Randy; Hawley, Donna

2008-01-01

Purpose: The purpose of this research is to examine career persistence and job satisfaction of beginning teachers. Design/methodology/approach: Four hundred and fifty-one tenth grade students from a nationally representative sample, who aspired to be teachers, were examined over a ten year period regarding their career choices. Students who…

Make Kids Count: Giving Babies a Smart Beginning.

ERIC Educational Resources Information Center

Thompson, Anne, Ed.

The Smart Beginnings project in Arizona is designed to increase public awareness and parent education about early childhood development and family support resources. The program is intended to identify, link, establish, and expand a public/private family support system and improve the quality and increase availability of infant and toddler child…

Swahili. An Active Introduction. General Conversation.

ERIC Educational Resources Information Center

Indakwa, John; And Others

This textbook is aimed towards the beginning student of Swahili and is designed to cover almost all the main features of Swahili structure. The course is divided into 87 "cycles," each of which begins with an "M" phase (mimicry, meaning, manipulation, memorization), and ends with a "C" phase (conversation and…

Promises and Pitfalls for Mentors of Beginning Teachers.

ERIC Educational Resources Information Center

Ganser, Tom

Mentoring programs for beginning teachers are designed to retain good teachers by providing them with psychological support and instructional assistance and introducing them to the cultures of the school and the district. Being a mentor also figures prominently in veteran teachers' professional development. An examination of the literature reveals…

Induction Program Design as It Relates to School Setting

ERIC Educational Resources Information Center

Gabel, Jamie Ann

2016-01-01

The purpose of this qualitative case study was to investigate the induction program differences offered to beginning teachers in rural versus suburban school settings and to identify which induction supports beginning teachers considered most important in achieving classroom success. The six participants included an administrator, mentor, and…

Bright Beginnings. WWC Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

Bright Beginnings is an early childhood curriculum, based in part on High/Scope[R] and Creative Curriculum[R], with an additional emphasis on literacy skills. The curriculum consists of nine thematic units designed to enhance children's cognitive, social, emotional, and physical development, and each unit includes concept maps, literacy lessons,…

Teaching the Adult Beginning Reader: Designing Research Based Reading Instructional Strategies.

ERIC Educational Resources Information Center

Boraks, Nancy; Richardson, Judy

Acknowledging that while it is difficult to suggest specific instructional strategies for accommodating differing adult beginning readers' (ABR) psychosocial behavior, this paper offers appropriate instructional principles based on the educational and social needs of the ABR. The principles presented are as follows: (1) teachers should help adults…

Vector Knowledge of Beginning Physics Students.

ERIC Educational Resources Information Center

Knight, Randall D.

1995-01-01

Presents the Vector Knowledge Test that was designed to see if beginning physics students possess the minimal basic knowledge of vectors that will allow them to proceed with a study of Newtonian mechanics. Concludes that only one-third of the students in a calculus-based introductory course at California Polytechnic had sufficient vector…

Preparing Beginning Teachers to Elicit and Interpret Students' Mathematical Thinking

ERIC Educational Resources Information Center

Sleep, Laurie; Boerst, Timothy A.

2012-01-01

This study investigated how teacher education assignments can be designed to support beginning teachers in learning to do the work of teaching. We examined beginners' formative assessment practices--in particular, their eliciting and interpreting of students' mathematical thinking--in the context of an elementary mathematics methods assignment,…

The Source[R] for Bilingual Students with Language Disorders.

ERIC Educational Resources Information Center

Roseberry-McKibbin, Celeste

This book is designed to help speech-language pathologists develop vocabulary and phonological awareness skills in bilingual students with language-learning disabilities (LLD). The book targets beginning through intermediate bilingual students in grades K-8. Part 1 of the book begins with teaching style strategies for teaching bilingual students…

The presence of field geologists in Mars-like terrain

NASA Technical Reports Server (NTRS)

Mcgreevy, Michael W.

1992-01-01

Methods of ethnographic observation and analysis have been coupled with object-oriented analysis and design concepts to begin the development of a clear path from observations in the field to the design of virtual presence systems. The existence of redundancies in field geology and presence allowed for the application of methods for understanding complex systems. As a result of this study, some of these redundancies have been characterized. Those described are all classes of continuity relations, including the continuities of continuous existence, context-constituent continuities, and state-process continuities. The discussion of each includes statements of general relationships, logical consequences of these, and hypothetical situations in which the relationships would apply. These are meant to aid in the development of a theory of presence. The discussion also includes design considerations, providing guidance for the design of virtual planetary exploration systems and other virtual presence systems. Converging evidence regarding continuity in presence is found in the nature of psychological dissociation. Specific methodological refinements should enhance ecological validity in subsequent field studies, which are in progress.

Gran Telescopio Canarias Commissioning Instrument Optomechanics

NASA Astrophysics Data System (ADS)

Espejo, Carlos; Cuevas, Salvador; Sanchez, Beatriz; Flores, Ruben; Lara, Gerardo; Farah, Alejandro; Godoy, Javier; Bringas, Vicente; Chavoya, Armando; Dorantes, Ariel; Manuel Montoya, Juan; Rangel, Juan Carlos; Devaney, Nicholas; Castro, Javier; Cavaller, Luis

2003-02-01

Under a contract with the GRANTECAN, the Commissioning Instrument is a project developed by a team of Mexican scientists and engineers from the Instrumentation Department of the Astronomy Institute at the UNAM and the CIDESI Engineering Center. This paper will discuss in some detail the final Commissioning Instrument (CI) mechanical design and fabrication. We will also explain the error budget and the barrels design as well as their thermal compensation. The optical design and the control system are discussed in other papers. The CI will just act as a diagnostic tool for image quality verification during the GTC Commissioning Phase. This phase is a quality control process for achieving, verifying, and documenting the performance of each GTC sub-systems. This is a very important step for the telescope life. It will begin on starting day and will last for a year. The CI project started in December 2000. The critical design phase was reviewed in July 2001. The CI manufacturing is currently in progress and most parts are finished. We are now approaching the factory acceptance stage.

[Application of microelectronics CAD tools to synthetic biology].

PubMed

Madec, Morgan; Haiech, Jacques; Rosati, Élise; Rezgui, Abir; Gendrault, Yves; Lallement, Christophe

2017-02-01

Synthetic biology is an emerging science that aims to create new biological functions that do not exist in nature, based on the knowledge acquired in life science over the last century. Since the beginning of this century, several projects in synthetic biology have emerged. The complexity of the developed artificial bio-functions is relatively low so that empirical design methods could be used for the design process. Nevertheless, with the increasing complexity of biological circuits, this is no longer the case and a large number of computer aided design softwares have been developed in the past few years. These tools include languages for the behavioral description and the mathematical modelling of biological systems, simulators at different levels of abstraction, libraries of biological devices and circuit design automation algorithms. All of these tools already exist in other fields of engineering sciences, particularly in microelectronics. This is the approach that is put forward in this paper. © 2017 médecine/sciences – Inserm.

What's so Simple about Simplified Texts? A Computational and Psycholinguistic Investigation of Text Comprehension and Text Processing

ERIC Educational Resources Information Center

Crossley, Scott A.; Yang, Hae Sung; McNamara, Danielle S.

2014-01-01

This study uses a moving windows self-paced reading task to assess both text comprehension and processing time of authentic texts and these same texts simplified to beginning and intermediate levels. Forty-eight second language learners each read 9 texts (3 different authentic, beginning, and intermediate level texts). Repeated measures ANOVAs…

Education Department Begins Process to Implement HEA Reauthorization with New Campus Safety Provisions

ERIC Educational Resources Information Center

Phillips, Lisa

2008-01-01

The U.S. Department of Education has announced the beginning of the process to develop rules for new requirements in the recently passed Higher Education Act (HEA). Highlights of the HEA that affect campus public safety departments include measures that: (1) Require a fire log be maintained at an institution of higher education for events that…

Smart cards: a specific application in the hospital.

PubMed

Güler, I; Zengin, R M; Sönmez, M

1998-12-01

Computers have the ability to process and access tremendous amounts of information in our daily lives. But, now, individuals have this ability by carrying a smart card in their own wallets. These cards provide us the versatility, power, and security of computers. This study begins with a short description of smart cards and their advantages. Then, an electronic circuit that is designed for healthcare application in hospitals is introduced. This circuit functions as a smart card holder identifier, access controller for hospital doors and also can be used as a smart card reader/writer. Design steps of this electronic circuit, operation principles, serial communication with P.C., and the software are examined. Finally a complete access control network for hospital doors that functions with smart cards is discussed.

An Application of Retroduction to Analyzing and Testing the Backing off of Nuts and Bolts During Dynamic Loading

NASA Technical Reports Server (NTRS)

Kerley, James J.

1987-01-01

The method of retroduction, adapted from the doctoral thesis of Dr. A. Croce, relies on a process of dialectic questioning that begins with the information sought, proceeds to Given items (either in the form of dimensions or limits of research). and to Known mathematical forms of analysis in design or to principles of study in research. Finally, analysis and synthesis are used to abstract the dielectic questions and to arrive at the information desired. This method is used to solve the engineering design problem of a beam and to determine why bolts and nuts vibrate apart. Both mathematical analysis and dialectic logical analysis are utilized. Results are provided of tests conducted to check the retroductive study of why and how nuts back off.

Agile development approach for the observatory control software of the DAG 4m telescope

NASA Astrophysics Data System (ADS)

Güçsav, B. Bülent; ćoker, Deniz; Yeşilyaprak, Cahit; Keskin, Onur; Zago, Lorenzo; Yerli, Sinan K.

2016-08-01

Observatory Control Software for the upcoming 4m infrared telescope of DAG (Eastern Anatolian Observatory in Turkish) is in the beginning of its lifecycle. After the process of elicitation-validation of the initial requirements, we have been focused on preparation of a rapid conceptual design not only to see the big picture of the system but also to clarify the further development methodology. The existing preliminary designs for both software (including TCS and active optics control system) and hardware shall be presented here in brief to exploit the challenges the DAG software team has been facing with. The potential benefits of an agile approach for the development will be discussed depending on the published experience of the community and on the resources available to us.

Assessing faculty integration of adult learning needs in second-degree nursing education.

PubMed

Robert, Tracey E; Pomarico, Carole A; Nolan, Mary

2011-01-01

The limited research data available on effective teaching strategies for accelerated baccalaureate nursing programs has generated interest in identifying and assessing successful teaching tools and strategies in current programs. Most data have been anecdotal and have not emphasized the effectiveness of accelerated programs. This study used a qualitative research design to determine the effectiveness of an integrative learning model in improving nursing student outcomes of second-degree students. Overall data from focus groups in the beginning and end of the study indicated that the use focus groups enhanced the learning process and outcomes.

Advancing System Flexibility for High Penetration Renewable Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milligan, Michael; Frew, Bethany; Zhou, Ella

2015-10-01

This report summarizes some of the issues discussed during the engagement on power system flexibility. By design, the focus is on flexibility options used in the United States. Exploration of whether and how U.S. experiences can inform Chinese energy planning will be part of the continuing project, and will benefit from the knowledge base provided by this report. We believe the initial stage of collaboration represented in this report has successfully started a process of mutual understanding, helping Chinese researchers to begin evaluating how lessons learned in other countries might translate to China's unique geographic, economic, social, and political contexts.

KSC-06pd0003

NASA Image and Video Library

2006-01-05

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center’s Orbiter Processing Facility bay 3, technicians begin removing a piece of hardware from the side of a fuel cell removed from the orbiter Discovery. Fuel cells are located under the forward portion of the payload bay. They make power for the orbiter by mixing hydrogen and oxygen to produce electricity. Fuel cells also create potable water that is pumped into storage tanks for the crew to use in orbit. Discovery is the designated orbiter for the second return-to-flight mission, STS-121, scheduled for launch in May. Photo credit: NASA/Kim Shiflett

The delayed theory of fields

NASA Astrophysics Data System (ADS)

Poormohammadi, Jaber; Rezagholizadeh, Hessam

The idea of action immediate propagation has been in physicists' mind from the beginning, until Faraday raised the idea of delayed propagation. Using this idea and the delayed theory of fields, we face consequences which can be interesting for anyone who has learned physics. We can mention non-equivalency between stationary frames and moving frames, dependency of field to medium, different velocity barriers for different mediums and non-equivalency of inertial reference frames are among these consequences. By designing an experiment we can challenge this theory and its consequences. All of these sections processed in the article titled ''The delayed theory of fields''.

75 FR 55356 - Proposed Collection, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... implementation process will begin with a pre-test beginning in the first quarter of 2011 to assess cell phone... burden, conducts a pre-clearance consultation program to provide the general public and Federal agencies...

75 FR 55612 - Proposed Collection, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

... implementation process will begin with a pre-test beginning in the first quarter of 2011 to assess cell phone... burden, conducts a pre-clearance consultation program to provide the general public and Federal agencies...

Designing timber highway bridge superstructures using AASHTO?LRFD specifications

Treesearch

James P. Wacker; James S. Groenier

2007-01-01

The allowable-stress design methodology that has been used for decades to design timber bridge superstructures is being replaced in the near future. Beginning in October 2007, bridge designers will be required by the Federal Highway Administration (FHWA) to utilize the Load and Resistance Factor Design (LRFD) design specifications published by the American Association...

Promoting Learning of Instructional Design via Overlay Design Tools

ERIC Educational Resources Information Center

Carle, Andrew Jacob

2012-01-01

I begin by introducing Virtual Design Apprenticeship (VDA), a learning model--built on a solid foundation of education principles and theories--that promotes learning of design skills via overlay design tools. In VDA, when an individual needs to learn a new design skill or paradigm she is provided accessible, concrete examples that have been…

Advanced technologies for maintenance of electrical systems and equipment at the Savannah River Site Defense Waste Processing Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husler, R.O.; Weir, T.J.

1991-01-01

An enhanced maintenance program is being established to characterize and monitor cables, components, and process response at the Savannah River Site, Defense Waste Processing Facility. This facility was designed and constructed to immobilize the radioactive waste currently stored in underground storage tanks and is expected to begin operation in 1993. The plant is initiating the program to baseline and monitor instrument and control (I C) and electrical equipment, remote process equipment, embedded instrument and control cables, and in-cell jumper cables used in the facility. This program is based on the electronic characterization and diagnostic (ECAD) system which was modified tomore » include process response analysis and to meet rigid Department of Energy equipment requirements. The system consists of computer-automated, state-of-the-art electronics. The data that are gathered are stored in a computerized database for analysis, trending, and troubleshooting. It is anticipated that the data which are gathered and trended will aid in life extension for the facility.« less

Advanced technologies for maintenance of electrical systems and equipment at the Savannah River Site Defense Waste Processing Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husler, R.O.; Weir, T.J.

1991-12-31

An enhanced maintenance program is being established to characterize and monitor cables, components, and process response at the Savannah River Site, Defense Waste Processing Facility. This facility was designed and constructed to immobilize the radioactive waste currently stored in underground storage tanks and is expected to begin operation in 1993. The plant is initiating the program to baseline and monitor instrument and control (I&C) and electrical equipment, remote process equipment, embedded instrument and control cables, and in-cell jumper cables used in the facility. This program is based on the electronic characterization and diagnostic (ECAD) system which was modified to includemore » process response analysis and to meet rigid Department of Energy equipment requirements. The system consists of computer-automated, state-of-the-art electronics. The data that are gathered are stored in a computerized database for analysis, trending, and troubleshooting. It is anticipated that the data which are gathered and trended will aid in life extension for the facility.« less

A longitudinal study on predictors of early calculation development among young children at risk for learning difficulties.

PubMed

Peng, Peng; Namkung, Jessica M; Fuchs, Douglas; Fuchs, Lynn S; Patton, Samuel; Yen, Loulee; Compton, Donald L; Zhang, Wenjuan; Miller, Amanda; Hamlett, Carol

2016-12-01

The purpose of this study was to explore domain-general cognitive skills, domain-specific academic skills, and demographic characteristics that are associated with calculation development from first grade to third grade among young children with learning difficulties. Participants were 176 children identified with reading and mathematics difficulties at the beginning of first grade. Data were collected on working memory, language, nonverbal reasoning, processing speed, decoding, numerical competence, incoming calculations, socioeconomic status, and gender at the beginning of first grade and on calculation performance at four time points: the beginning of first grade, the end of first grade, the end of second grade, and the end of third grade. Latent growth modeling analysis showed that numerical competence, incoming calculation, processing speed, and decoding skills significantly explained the variance in calculation performance at the beginning of first grade. Numerical competence and processing speed significantly explained the variance in calculation performance at the end of third grade. However, numerical competence was the only significant predictor of calculation development from the beginning of first grade to the end of third grade. Implications of these findings for early calculation instructions among young at-risk children are discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

Riser Feeding Evaluation Method for Metal Castings Using Numerical Analysis

NASA Astrophysics Data System (ADS)

Ahmad, Nadiah

One of the design aspects that continues to create a challenge for casting designers is the optimum design of casting feeders (risers). As liquid metal solidifies, the metal shrinks and forms cavities inside the casting. In order to avoid shrinkage cavities, risers are added to the casting shape to supply additional molten metal when shrinkage occurs during solidification. The shrinkage cavities in the casting are compensated by controlling the cooling rate to promote directional solidification. This control can be achieved by designing the casting such that the cooling begins at the sections that are farthest away from the risers and ends at the risers. Therefore, the risers will solidify last and feed the casting with the molten metal. As a result, the shrinkage cavities formed during solidification are in the risers which are later removed from the casting. Since casting designers have to usually go through iterative processes of validating the casting designs which are very costly due to expensive simulation processes or manual trials and errors on actual casting processes, this study investigates more efficient methods that will help casting designers utilize their casting experiences systematically to develop good initial casting designs. The objective is to reduce the casting design method iterations; therefore, reducing the cost involved in that design processes. The aim of this research aims at finding a method that can help casting designers design effective risers used in sand casting process of aluminum-silicon alloys by utilizing the analysis of solidification simulation. The analysis focuses on studying the significance of pressure distribution of the liquid metal at the early stage of casting solidification, when heat transfer and convective fluid flow are taken into account in the solidification simulation. The mathematical model of casting solidification was solved using the finite volume method (FVM). This study focuses to improve our understanding of the feeding behavior in aluminum-silicon alloys and the effective feeding by considering the pressure gradient distribution of the molten metal at casting dendrite coherency point. For this study, we will identify the relationship between feeding efficiency, shrinkage behavior and how the change in riser size affects the pressure gradient in the casting. This understanding will be used to help in the design of effective risers.

Designing of deployment sequence for braking and drift systems in atmosphere of Mars and Venus

NASA Astrophysics Data System (ADS)

Vorontsov, Victor

2006-07-01

Analysis of project development and space research using contact method, namely, by means of automatic descent modules and balloons shows that designing formation of entry, descent and landing (EDL) sequence and operation in the atmosphere are of great importance. This process starts at the very beginning of designing, has undergone a lot of iterations and influences processing of normal operation results. Along with designing of descent module systems, including systems of braking in the atmosphere, designing of flight operation sequence and trajectories of motion in the atmosphere is performed. As the entire operation sequence and transfer from one phase to another was correctly chosen, the probability of experiment success on the whole and efficiency of application of various systems vary. By now the most extensive experience of Russian specialists in research of terrestrial planets has been gained with the help of automatic interplanetary stations “Mars”, “Venera”, “Vega” which had descent modules and drifting in the atmosphere balloons. Particular interest and complicity of formation of EDL and drift sequence in the atmosphere of these planets arise from radically different operation conditions, in particular, strongly rarefied atmosphere of the one planet and extremely dense atmosphere of another. Consequently, this determines the choice of braking systems and their parameters and method of EDL consequence formation. At the same time there are general fundamental methods and designed research techniques that allowed taking general technical approach to designing of EDL and drift sequence in the atmosphere.

Astrobiobound! Search for Life in the Solar System: Scientists and Engineers Bringing their Challenges to K-12 Students

NASA Astrophysics Data System (ADS)

Klug Boonstra, S. L.; Swann, J.; Manfredi, L.; Zippay, A.; Boonstra, D.

2014-12-01

The Next Generation Science Standards (NGSS) brought many dynamic opportunities and capabilities to the K-12 science classroom - especially with the inclusion of engineering. Using science as a context to help students engage in the engineering practices and engineering disciplinary core ideas is an essential step to students' understanding of how science drives engineering and how engineering enables science. Real world examples and applications are critical for students to see how these disciplines are integrated. Furthermore, the interface of science and engineering raise the level of science understanding, and facilitate higher order thinking skills through relevant experiences. Astrobiobound! is designed for the NGSS (Next Generation Science Standards) and CCSS (Common Core State Standards). Students also practice and build 21st Century Skills. Astrobiobound! help students see how science and systems engineering are integrated to achieve a focused scientific goal. Students engage in the engineering design process to design a space mission which requires them to balance the return of their science data with engineering limitations such as power, mass and budget. Risk factors also play a role during this simulation and adds to the excitement and authenticity. Astrobiobound! presents the authentic first stages of NASA mission design process. This simulation mirrors the NASA process in which the science goals, type of mission, and instruments to return required data to meet mission goals are proposed within mission budget before any of the construction part of engineering can begin. NASA scientists and engineers were consulted in the development of this activity as an authentic simulation of their mission proposal process.

Cavitation in centrifugal pump with rotating walls of axial inlet device

NASA Astrophysics Data System (ADS)

Moloshnyi, O.; Sotnyk, M.

2017-08-01

The article deals with the analysis of cavitation processes in the flowing part of the double entry centrifugal pump. The analysis is conducted using numerical modeling of the centrifugal pump operating process in the software environment ANSYS CFX. Two models of the axial inlet device is researched. It is shaped by a cylindrical section and diffuser section in front of the impeller, which includes fairing. The walls of the axial inlet device rotate with the same speed as the pump rotor. The numerical experiment is conducted under the condition of the flow rate change and absolute pressure at the inlet. The analysis shows that the pump has the average statistical cavitation performance. The occurrence of the cavitation in the axial inlet device is after narrowing the cross-section of flow channel and at the beginning of the diffuser section. Additional sudden expansion at the outlet of the axial inlet diffuser section does not affect the cavitation characteristics of the impeller, however, improves cavitation characteristics of the axial inlet device. For considered geometric parameters of the axial inlet device the cavitation in the impeller begins earlier than in the axial inlet device. That is, the considered design of the axial inlet device will not be subjected to destruction at the ensuring operation without cavitation in the impeller.

Multi-sensor Navigation System Design

DOT National Transportation Integrated Search

1971-03-01

This report treats the design of naviggation systems that collect data from two or more on-board measurement subsystems and precess this data in an on-board computer. Such systems are called Multi-sensor Navigation Systems. : The design begins with t...

Mentoring for Beginning Principals: Revisiting the Past or Preparing for the Future?

ERIC Educational Resources Information Center

Daresh, John C.

2007-01-01

This paper describes a study of mentoring programs for beginning principals in two different urban school districts. In both settings, the goal of mentoring was said to be support for instructional leadership behaviors by novice principals. This represents an alternative to traditional mentoring schemes designed solely to ensure that first year…

Masomo Ya Kiswahili [A Kiswahili Course].

ERIC Educational Resources Information Center

Michuki, David N.; Cahill, William F.

This series of illustrated texts in beginning Swahili is a project of the Language Section of the Curriculum Development and Research Centre of the Ministry of Education, Nairobi, Kenya. The course is designed specifically for children who begin the study of Swahili as a second language in Standard (Grade) 4. Students' texts consist of Volumes 1…

An Individual Appraisal and Prescription for the Beginning Jogger.

ERIC Educational Resources Information Center

Davis, Myron W.; VanWoerkom, Carol L.

1981-01-01

The Cardiovascular Appraisal and Prescription Program is designed to provide safe initiating procedures for the beginning jogger. By using this procedure, the participant learns how to pace the amount of jogging according to the present level of fitness. A self-administered stress monitor worksheet and a sample exercise workout are included. (JN)

Sex Differences in Prereading Skills in Beginning Kindergarten.

ERIC Educational Resources Information Center

Scheuneman, Janice; Mitchell, Blythe C.

Data collected during the standardization of the 1976 Metropolitan Readiness Tests (MRT) were examined to provide information on sex differences in prereading skills. The MRT are designed for administration either at the beginning of kindergarten or between kindergarten and first grade. Performance on the six subtests and the total test on both…

Baby Basics: Children's Activities in How Life Begins. Children's Activity Series.

ERIC Educational Resources Information Center

Picco, Elizabeth Raptis

These supplemental teaching resources promote awareness about health, family life, and cultural diversity for children in kindergarten through third grade, and offer a variety of concrete, visual activities to help young children understand how life begins for all living things. The format of each lesson is designed to help classroom and daycare…

Exploring Beginning Inference with Novice Grade 7 Students

ERIC Educational Resources Information Center

Watson, Jane M.

2008-01-01

This study documented efforts to facilitate ideas of beginning inference in novice grade 7 students. A design experiment allowed modified teaching opportunities in light of observation of components of a framework adapted from that developed by Pfannkuch for teaching informal inference with box plots. Box plots were replaced by hat plots, a…

A Pilot Study of Problems and Practices in the Induction of Beginning Teachers.

ERIC Educational Resources Information Center

Bouchard, John B.; Hull, Ronald E.

A pilot study was designed to test the practicality of gathering data through interviews and to provide tentative information on induction problems and practices encountered by beginning teachers in the Cattaraugus-Chautauqua County area of New York. Fifty-three elementary self-contained classroom teachers and secondary academic subject-matter…

Mentor Policy and the Quality of Mentoring

ERIC Educational Resources Information Center

Polikoff, Morgan S.; Desimone, Laura M.; Porter, Andrew C.; Hochberg, Eric D.

2015-01-01

Mentoring is a common form of support for beginning teachers. State and district mentoring policies vary along a number of dimensions, yet policymakers have little evidence to draw on in designing effective mentoring programs. We use quantitative and qualitative data from a study of beginning middle school mathematics teachers in 10 districts to…

Physical Origins of Space Weather Impacts: Open Physics Questions

NASA Astrophysics Data System (ADS)

Lanzerotti, L. J.

2011-12-01

Beginning with the era of development of electrical telegraph systems in the early 19th century, physical processes in the space environment on the Sun, in the interplanetary medium, and around Earth have influenced the design and operations of ever-increasing and sophisticated technical systems, both in space and on the ground. Understanding of Earth's space environment has increased enormously in the last century and one-half. Nevertheless, many of the physical processes that produced effects on early cable and wireless technologies continue to plague modern-day systems. And as new technologies are developed for improved communications, surveillance, navigation, and conditions for human space flight, the solar-terrestrial environment often offers surprises to their safe, secure and uninterrupted operations. This talk will address some of the challenges that I see to the successful operations of some modern-day technical systems that are posed by significant deficiencies of understanding of physical processes operating from the Sun to the Earth.

Biotechnology and genetic engineering in the new drug development. Part III. Biocatalysis, metabolic engineering and molecular modelling.

PubMed

Stryjewska, Agnieszka; Kiepura, Katarzyna; Librowski, Tadeusz; Lochyński, Stanisław

2013-01-01

Industrial biotechnology has been defined as the use and application of biotechnology for the sustainable processing and production of chemicals, materials and fuels. It makes use of biocatalysts such as microbial communities, whole-cell microorganisms or purified enzymes. In the review these processes are described. Drug design is an iterative process which begins when a chemist identifies a compound that displays an interesting biological profile and ends when both the activity profile and the chemical synthesis of the new chemical entity are optimized. Traditional approaches to drug discovery rely on a stepwise synthesis and screening program for large numbers of compounds to optimize activity profiles. Over the past ten to twenty years, scientists have used computer models of new chemical entities to help define activity profiles, geometries and relativities. This article introduces inter alia the concepts of molecular modelling and contains references for further reading.

KSC-08pd0084

NASA Image and Video Library

2008-01-24

KENNEDY SPACE CENTER, FLA. -- In the hypergolic maintenance facility at NASA's Kennedy Space Center, technicians get ready to begin testing elements of the Ares I-X Roll Control System, or RoCS. The RoCS Servicing Simulation Test is to gather data that will be used to help certify the ground support equipment design and validate the servicing requirements and processes. The RoCS is part of the Interstage structure, the lowest axial segment of the Upper Stage Simulator. In an effort to reduce costs and meet the schedule, most of the ground support equipment that will be used for the RoCS servicing is of space shuttle heritage. This high-fidelity servicing simulation will provide confidence that servicing requirements can be met with the heritage system. At the same time, the test will gather process data that will be used to modify or refine the equipment and processes to be used for the actual flight element. Photo credit: NASA/Kim Shiflett

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

Applications of different design methodologies in navigation systems and development at JPL

NASA Technical Reports Server (NTRS)

Thurman, S. W.

1990-01-01

The NASA/JPL deep space navigation system consists of a complex array of measurement systems, data processing systems, and support facilities, with components located both on the ground and on-board interplanetary spacecraft. From its beginings nearly 30 years ago, this system has steadily evolved and grown to meet the demands for ever-increasing navigation accuracy placed on it by a succession of unmanned planetary missions. Principal characteristics of this system are its capabilities and great complexity. Three examples in the design and development of interplanetary space navigation systems are examined in order to make a brief assessment of the usefulness of three basic design theories, known as normative, rational, and heuristic. Evaluation of the examples indicates that a heuristic approach, coupled with rational-based mathematical and computational analysis methods, is used most often in problems such as orbit determination strategy development and mission navigation system design, while normative methods have seen only limited use is such applications as the development of large software systems and in the design of certain operational navigation subsystems.

Using of Group-Modeling in Predesign Phase of New Healthcare Environments: Stakeholders Experiences.

PubMed

Elf, Marie; Eldh, Ann Catrine; Malmqvist, Inga; Öhrn, Kerstin; von Koch, Lena

2016-01-01

Current research shows a relationship between healthcare architecture and patient-related outcomes. The planning and designing of new healthcare environments is a complex process. The needs of the various end users of the environment must be considered, including the patients, the patients' significant others, and the staff. The aim of this study was to explore the experiences of healthcare professionals participating in group modeling utilizing system dynamics in the predesign phase of new healthcare environments. We engaged healthcare professionals in a series of workshops using system dynamics to discuss the planning of healthcare environments in the beginning of a construction and then interviewed them about their experience. An explorative and qualitative design was used to describe participants' experiences of participating in the group-modeling projects. Participants (N = 20) were recruited from a larger intervention study using group modeling and system dynamics in planning and designing projects. The interviews were analyzed by qualitative content analysis. Two themes were formed, representing the experiences in the group-modeling process: "Participation in the group modeling generated knowledge and was empowering" and "Participation in the group modeling differed from what was expected and required the dedication of time and skills." The method can support participants in design teams to focus more on their healthcare organization, their care activities, and their aims rather than focusing on detailed layout solutions. This clarification is important when decisions about the design are discussed and prepared and will most likely lead to greater readiness for future building process. © The Author(s) 2015.

Design Studios in Instructional Design and Technology: What Are the Possibilities?

ERIC Educational Resources Information Center

Knowlton, Dave S.

2016-01-01

Design studios are an innovative way to educate Instructional Design and Technology (IDT) students. This article begins by addressing literature about IDT design studios. One conclusion from this literature is that IDT studios have been theoretically conceptualized. However, much of this conceptualization is insular to the field of IDT and only…

Integrated approach for selecting efficient Saccharomyces cerevisiae for industrial lignocellulosic fermentations: Importance of yeast chassis linked to process conditions.

PubMed

Costa, Carlos E; Romaní, Aloia; Cunha, Joana T; Johansson, Björn; Domingues, Lucília

2017-03-01

In this work, four robust yeast chassis isolated from industrial environments were engineered with the same xylose metabolic pathway. The recombinant strains were physiologically characterized in synthetic xylose and xylose-glucose medium, on non-detoxified hemicellulosic hydrolysates of fast-growing hardwoods (Eucalyptus and Paulownia) and agricultural residues (corn cob and wheat straw) and on Eucalyptus hydrolysate at different temperatures. Results show that the co-consumption of xylose-glucose was dependent on the yeast background. Moreover, heterogeneous results were obtained among different hydrolysates and temperatures for each individual strain pointing to the importance of designing from the very beginning a tailor-made yeast considering the specific raw material and process. Copyright © 2016 Elsevier Ltd. All rights reserved.

Serum, liver, and lung levels of the major extracellular matrix components at the early stage of BCG-induced granulomatosis depending on the infection route.

PubMed

Kim, L B; Shkurupy, V A; Putyatina, A N

2015-01-01

Experiments on the model of mouse BCG-induced granulomatous showed that the content of glycosaminoglycans and proteoglycans in the extracellular matrix of the liver and lungs are changed at the early stages of inflammation (days 3 and 30 postinfection) before cell destruction in the organs begins. This is related to degradation of extracellular matrix structures. Their high content in the blood and interstitium probably contributes to the formation of granulomas, fibroblast proliferation and organ fibrosis. These processes depend on the infection route that determines different conditions for generalization of the inflammation process. Intravenous method of vaccine injection is preferable to use when designing the experiments simulating tuberculosis granulomatosis, especially for the analysis of its early stages.

The application and use of chemical space mapping to interpret crystallization screening results

PubMed Central

Snell, Edward H.; Nagel, Ray M.; Wojtaszcyk, Ann; O’Neill, Hugh; Wolfley, Jennifer L.; Luft, Joseph R.

2008-01-01

Macromolecular crystallization screening is an empirical process. It often begins by setting up experiments with a number of chemically diverse cocktails designed to sample chemical space known to promote crystallization. Where a potential crystal is seen a refined screen is set up, optimizing around that condition. By using an incomplete factorial sampling of chemical space to formulate the cocktails and presenting the results graphically, it is possible to readily identify trends relevant to crystallization, coarsely sample the phase diagram and help guide the optimization process. In this paper, chemical space mapping is applied to both single macromolecules and to a diverse set of macromolecules in order to illustrate how visual information is more readily understood and assimilated than the same information presented textually. PMID:19018100

The application and use of chemical space mapping to interpret crystallization screening results.

PubMed

Snell, Edward H; Nagel, Ray M; Wojtaszcyk, Ann; O'Neill, Hugh; Wolfley, Jennifer L; Luft, Joseph R

2008-12-01

Macromolecular crystallization screening is an empirical process. It often begins by setting up experiments with a number of chemically diverse cocktails designed to sample chemical space known to promote crystallization. Where a potential crystal is seen a refined screen is set up, optimizing around that condition. By using an incomplete factorial sampling of chemical space to formulate the cocktails and presenting the results graphically, it is possible to readily identify trends relevant to crystallization, coarsely sample the phase diagram and help guide the optimization process. In this paper, chemical space mapping is applied to both single macromolecules and to a diverse set of macromolecules in order to illustrate how visual information is more readily understood and assimilated than the same information presented textually.

KSC-06pd0022

NASA Image and Video Library

2006-01-11

KENNEDY SPACE CENTER, FLA. - In the Thermal Protection System Facility, Tim Wright, engineering manager with United Space Alliance, tests a new tile, called "Boeing replacement insulation" or "BRI-18." The new tiles will gradually replace older tiles around main landing gear doors, external tank doors and nose landing gear doors. Currently, 10 tiles have been processed inside the facility. Discovery will receive the first BRI-18 tiles. Technicians inside the Orbiter Processing Facility are performing fit checks and will begin bonding the tiles to the vehicle this month. The raw material is manufactured by The Boeing Company in Huntington Beach, Calif. Replacing older tile with the BRI-18 tile in strategic areas is one of the Columbia Accident Investigation Board's recommendations to strengthen the orbiters. The tiles are more impact resistant than previous designs, enhancing the crew’s safety.

Deep Space 1 arrives at KSC and processing begins in the PHSF

NASA Technical Reports Server (NTRS)

1998-01-01

Wearing special protective suits, workers remove the protective covering from NASA's Deep Space 1 spacecraft in the Payload Hazardous Servicing Facility at KSC to prepare it for prelaunch processing. Targeted for launch on a Boeing Delta 7326 rocket on Oct. 15, 1998, the first flight in NASA's New Millennium Program is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

KSC-06pd0021

NASA Image and Video Library

2006-01-11

KENNEDY SPACE CENTER, FLA. - In the Thermal Protection System Facility, Tim Wright, engineering manager with United Space Alliance, tests a new tile, called "Boeing replacement insulation" or "BRI-18." The new tiles will gradually replace older tiles around main landing gear doors, external tank doors and nose landing gear doors. Currently, 10 tiles have been processed inside the facility. Discovery will receive the first BRI-18 tiles. Technicians inside the Orbiter Processing Facility are performing fit checks and will begin bonding the tiles to the vehicle this month. The raw material is manufactured by The Boeing Company in Huntington Beach, Calif. Replacing older tile with the BRI-18 tile in strategic areas is one of the Columbia Accident Investigation Board's recommendations to strengthen the orbiters. The tiles are more impact resistant than previous designs, enhancing the crew’s safety.

[The beginning of human life: ethical and legal perspectives in the context of biotechnological progress].

PubMed

Barretto, Vicente de Paulo; Lauxen, Elis Cristina Uhry

2017-07-13

Questions concerning the beginning of human life have pervaded society since antiquity. In the post-modern world, scientific and technological advances have fueled discussions on the issue, such that debates previously concentrated on abortion now also focus on biotechnological interventions. The article addresses the latter, reflecting on the extent to which human dignity can be considered a (hermeneutic) reference in establishing ethical and legal parameters for biotechnological advances in the definition of the beginning of human life. The study's method was critical hermeneutic ethics, with ethics at the center of the process of understanding and interpretation, observing the contours of facticity. No consensus was found on the beginning of human life, so it is essential to engage in dialogue with the new reality resulting from biotechnological advances in the process of defining ethical and legal principles for protecting the embryo and human nature, with human dignity as the reference.

Hawaiian Volcano Observatory Seismic Data, January to December 2007

USGS Publications Warehouse

Nakata, Jennifer S.; Okubo, Paul G.

2008-01-01

The U.S. Geological Survey (USGS), Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year. The seismic summary is offered without interpretation as a source of preliminary data and is complete in that most data for events of M=1.5 are included. All latitude and longitude references in this report are stated in Old Hawaiian Datum. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data necessitated an annual publication, beginning with Summary 74 for the year 1974. Beginning in 2004, summaries are simply identified by the year, rather than by summary number. Summaries originally issued as administrative reports were republished in 2007 as Open-File Reports. All the summaries since 1956 are listed at http://geopubs.wr.usgs.gov/ (last accessed September 30, 2008). In January 1986, HVO adopted CUSP (California Institute of Technology USGS Seismic Processing). Summary 86 includes a description of the seismic instrumentation, calibration, and processing used in recent years. The present summary includes background information about the seismic network to provide the end user an understanding of the processing parameters and how the data were gathered. A report by Klein and Koyanagi (1980) tabulates instrumentation, calibration, and recording history of each seismic station in the network. It is designed as a reference for users of seismograms and phase data and includes and augments the information in the station table in this summary.

The Concept of Curriculum Design.

ERIC Educational Resources Information Center

Barrow, Robin

This paper approaches the concept of curriculum design from a philosophical perspective, arguing that the concept of "design" in curriculum is fundamentally misleading. The paper begins with a series of comments questioning the assumption that curriculum design involves a set of discrete skills or procedures in which one may attain expertise, like…

Effects of Screen Designs in CBI Environments.

ERIC Educational Resources Information Center

Ikegulu, Patricia R.

This article focuses on the effectiveness of computer-based instruction (CBI) screen designs, including their benefits and limitations, as well as human constraints in designing effective CBI. The paper begins with an overview of what comprises an effective CBI screen design, including characteristics of human factors, how information must be…

Reconceptualizing Design Research in the Age of Mobile Learning

ERIC Educational Resources Information Center

Bannan, Brenda; Cook, John; Pachler, Norbert

2016-01-01

The purpose of this paper is to begin to examine how the intersection of mobile learning and design research prompts the reconceptualization of research and design individually as well as their integration appropriate for current, complex learning environments. To fully conceptualize and reconceptualize design research in mobile learning, the…

The NHERI RAPID Facility: Enabling the Next-Generation of Natural Hazards Reconnaissance

NASA Astrophysics Data System (ADS)

Wartman, J.; Berman, J.; Olsen, M. J.; Irish, J. L.; Miles, S.; Gurley, K.; Lowes, L.; Bostrom, A.

2017-12-01

The NHERI post-disaster, rapid response research (or "RAPID") facility, headquartered at the University of Washington (UW), is a collaboration between UW, Oregon State University, Virginia Tech, and the University of Florida. The RAPID facility will enable natural hazard researchers to conduct next-generation quick response research through reliable acquisition and community sharing of high-quality, post-disaster data sets that will enable characterization of civil infrastructure performance under natural hazard loads, evaluation of the effectiveness of current and previous design methodologies, understanding of socio-economic dynamics, calibration of computational models used to predict civil infrastructure component and system response, and development of solutions for resilient communities. The facility will provide investigators with the hardware, software and support services needed to collect, process and assess perishable interdisciplinary data following extreme natural hazard events. Support to the natural hazards research community will be provided through training and educational activities, field deployment services, and by promoting public engagement with science and engineering. Specifically, the RAPID facility is undertaking the following strategic activities: (1) acquiring, maintaining, and operating state-of-the-art data collection equipment; (2) developing and supporting mobile applications to support interdisciplinary field reconnaissance; (3) providing advisory services and basic logistics support for research missions; (4) facilitating the systematic archiving, processing and visualization of acquired data in DesignSafe-CI; (5) training a broad user base through workshops and other activities; and (6) engaging the public through citizen science, as well as through community outreach and education. The facility commenced operations in September 2016 and will begin field deployments beginning in September 2018. This poster will provide an overview of the vision for the RAPID facility, the equipment that will be available for use, the facility's operations, and opportunities for user training and facility use.

The Application of Intensive Longitudinal Methods to Investigate Change: Stimulating the Field of Applied Family Research.

PubMed

Bamberger, Katharine T

2016-03-01

The use of intensive longitudinal methods (ILM)-rapid in situ assessment at micro timescales-can be overlaid on RCTs and other study designs in applied family research. Particularly, when done as part of a multiple timescale design-in bursts over macro timescales-ILM can advance the study of the mechanisms and effects of family interventions and processes of family change. ILM confers measurement benefits in accurately assessing momentary and variable experiences and captures fine-grained dynamic pictures of time-ordered processes. Thus, ILM allows opportunities to investigate new research questions about intervention effects on within-subject (i.e., within-person, within-family) variability (i.e., dynamic constructs) and about the time-ordered change process that interventions induce in families and family members beginning with the first intervention session. This paper discusses the need and rationale for applying ILM to family intervention evaluation, new research questions that can be addressed with ILM, example research using ILM in the related fields of basic family research and the evaluation of individual-based interventions. Finally, the paper touches on practical challenges and considerations associated with ILM and points readers to resources for the application of ILM.

Evaluating concentration estimation errors in ELISA microarray experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daly, Don S.; White, Amanda M.; Varnum, Susan M.

Enzyme-linked immunosorbent assay (ELISA) is a standard immunoassay to predict a protein concentration in a sample. Deploying ELISA in a microarray format permits simultaneous prediction of the concentrations of numerous proteins in a small sample. These predictions, however, are uncertain due to processing error and biological variability. Evaluating prediction error is critical to interpreting biological significance and improving the ELISA microarray process. Evaluating prediction error must be automated to realize a reliable high-throughput ELISA microarray system. Methods: In this paper, we present a statistical method based on propagation of error to evaluate prediction errors in the ELISA microarray process. Althoughmore » propagation of error is central to this method, it is effective only when comparable data are available. Therefore, we briefly discuss the roles of experimental design, data screening, normalization and statistical diagnostics when evaluating ELISA microarray prediction errors. We use an ELISA microarray investigation of breast cancer biomarkers to illustrate the evaluation of prediction errors. The illustration begins with a description of the design and resulting data, followed by a brief discussion of data screening and normalization. In our illustration, we fit a standard curve to the screened and normalized data, review the modeling diagnostics, and apply propagation of error.« less

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

Creation of system of computer-aided design for technological objects

NASA Astrophysics Data System (ADS)

Zubkova, T. M.; Tokareva, M. A.; Sultanov, N. Z.

2018-05-01

Due to the competition in the market of process equipment, its production should be flexible, retuning to various product configurations, raw materials and productivity, depending on the current market needs. This process is not possible without CAD (computer-aided design). The formation of CAD begins with planning. Synthesizing, analyzing, evaluating, converting operations, as well as visualization and decision-making operations, can be automated. Based on formal description of the design procedures, the design route in the form of an oriented graph is constructed. The decomposition of the design process, represented by the formalized description of the design procedures, makes it possible to make an informed choice of the CAD component for the solution of the task. The object-oriented approach allows us to consider the CAD as an independent system whose properties are inherited from the components. The first step determines the range of tasks to be performed by the system, and a set of components for their implementation. The second one is the configuration of the selected components. The interaction between the selected components is carried out using the CALS standards. The chosen CAD / CAE-oriented approach allows creating a single model, which is stored in the database of the subject area. Each of the integration stages is implemented as a separate functional block. The transformation of the CAD model into the model of the internal representation is realized by the block of searching for the geometric parameters of the technological machine, in which the XML-model of the construction is obtained on the basis of the feature method from the theory of image recognition. The configuration of integrated components is divided into three consecutive steps: configuring tasks, components, interfaces. The configuration of the components is realized using the theory of "soft computations" using the Mamdani fuzzy inference algorithm.

An intelligent advisor for the design manager

NASA Technical Reports Server (NTRS)

Rogers, James L.; Padula, Sharon L.

1989-01-01

A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, much time and money are spent in determining the couplings among modules and the presence of iterative loops. This is important because the design manager must know how to group the modules into substems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information becomes available or as the design specifications change. The purchase of this research effort is to develop a knowledge-based tool to act as an intelligent advisor for the design manager. This tool identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. The tool was tested in the decomposition of the COFS (Control of Flexible Structures) mast design which has about 50 modules. This test indicated that this type of approach could lead to a substantial savings by organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams.

Improved predictive modeling of white LEDs with accurate luminescence simulation and practical inputs with TracePro opto-mechanical design software

NASA Astrophysics Data System (ADS)

Tsao, Chao-hsi; Freniere, Edward R.; Smith, Linda

2009-02-01

The use of white LEDs for solid-state lighting to address applications in the automotive, architectural and general illumination markets is just emerging. LEDs promise greater energy efficiency and lower maintenance costs. However, there is a significant amount of design and cost optimization to be done while companies continue to improve semiconductor manufacturing processes and begin to apply more efficient and better color rendering luminescent materials such as phosphor and quantum dot nanomaterials. In the last decade, accurate and predictive opto-mechanical software modeling has enabled adherence to performance, consistency, cost, and aesthetic criteria without the cost and time associated with iterative hardware prototyping. More sophisticated models that include simulation of optical phenomenon, such as luminescence, promise to yield designs that are more predictive - giving design engineers and materials scientists more control over the design process to quickly reach optimum performance, manufacturability, and cost criteria. A design case study is presented where first, a phosphor formulation and excitation source are optimized for a white light. The phosphor formulation, the excitation source and other LED components are optically and mechanically modeled and ray traced. Finally, its performance is analyzed. A blue LED source is characterized by its relative spectral power distribution and angular intensity distribution. YAG:Ce phosphor is characterized by relative absorption, excitation and emission spectra, quantum efficiency and bulk absorption coefficient. Bulk scatter properties are characterized by wavelength dependent scatter coefficients, anisotropy and bulk absorption coefficient.

CVISN system design description

DOT National Transportation Integrated Search

1999-05-01

This document focuses on the Commercial Vehicle Information Systems and Networks (CVISN) System Design and Architecture. It begins with a discussion on the relationships between the National ITS Architecture the CVISN Architecture, and the Internatio...

77 FR 19861 - Certain Polybrominated Diphenylethers; Significant New Use Rule and Test Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

...The Agency is proposing to amend the Toxic Substances Control Act (TSCA) section 5(a) Significant New Use Rule (SNUR), for certain polybrominated diphenylethers (PBDEs) by: Designating processing of six PBDEs, or any combination of these chemical substances resulting from a chemical reaction, as a significant new use; designating manufacturing, importing, and processing of a seventh PBDE, decabromodiphenyl ether (decaBDE) for any use which is not ongoing after December 31, 2013, as a significant new use; and making inapplicable the article exemption for SNURs for this action. A person who intends to import or process any of the seven PBDEs included in the proposed SNUR, as part of an article for a significant new use would be required to notify EPA at least 90 days in advance to ensure that the Agency has an opportunity to review and, if necessary, restrict or prohibit a new use before it begins. EPA is also proposing a test rule under TSCA that would require any person who manufactures or processes commercial pentabromodiphenyl ether (c-pentaBDE), commercial octabromodiphenyl ether (c-octaBDE), or commercial decaBDE (c-decaBDE), including in articles, for any use after December 31, 2013, to conduct testing on their effects on health and the environment. EPA is proposing to designate all discontinued uses of PBDEs as significant new uses. The test rule would be promulgated if EPA determines that there are persons who intend to manufacture, import, or process c-pentaBDE, c-octaBDE, or c-decaBDE, for any use, including in articles, after December 31, 2013.

Beginning Wind Instrument Instruction: A Comparison of Aural and Visual Approaches

ERIC Educational Resources Information Center

Haston, Warren

2010-01-01

The purpose of this study was to assess the effectiveness of teaching beginning wind instrumentalists using a sound-before-sight (aural) approach, designed to foster the connections between eyes, ears, and fingers; and capitalize on students' musical intuitions. Participants received one hour of weekly instruction for 15 weeks. One group (n = 10)…

Interview Schedule for Studying Why Adults Learn.

ERIC Educational Resources Information Center

Tough, Allen

Designed for use in a 1968 study of why adults learn, this interview schedule contains situation-description and question sheets for use by the interviewer and subject for examining thirteen reasons why adults begin and why they continue a learning project. (The study, "Why Adults Learn: A Study of the Major Reasons for Beginning and Continuing a…

Math Talk and Representations in Elementary Classrooms of Beginning Teachers: A MLM Exploratory Analysis

ERIC Educational Resources Information Center

Alnizami, Reema

2017-01-01

This study examined the math talk and the use of multiple representations in elementary classrooms of 134 beginning teachers, all in their second year of teaching. A quantitative correlational research design was employed to investigate the research questions. The data were collected using a log instrument, the Instructional Practices Log in…

Beginnings: Beginning Musical Strategies with Social Implications for Level V Middle School Students in Baltimore County, Maryland.

ERIC Educational Resources Information Center

Teske, Patricia W.

This document presents strategies developed for teaching learning disabled, emotionally disturbed, or intellectually limited middle school students in the music classroom. The proposed strategies are designed to meet the following criteria: (1) the musical activities are to be musically appropriate for middle school adolescents; (2) each activity…

Complexity and the Beginning Principal in the United States: Perspectives on Socialization

ERIC Educational Resources Information Center

Crow, Gary M.

2006-01-01

Purpose: This paper aims to contribute to the literature and practice on beginning principal socialization by identifying the features of post-industrial work that create a more complex work environment for the practice and learning of the principalship in the USA. Design/methodology/approach: Based on recent literature on the changing nature of…

Teaching Professionalism in Nursing: A Quantitative Survey of Beginning Student Nurse Perceptions of Professional Values Interpreted within a Leadership Context

ERIC Educational Resources Information Center

Corrao, Jocelyn J.

2016-01-01

The researcher designed this quantitative dissertation research to explore the perceptions of beginning nursing students toward professionalism in nursing, specific to professional values within the context of curriculum delivery for a leadership and management course in one baccalaureate nursing program. In addition, the researcher reviewed the…

"It Just Got Real": Navigating the Affordances and Constraints of School-Based Learning in a Mathematics-Specific Induction Program

ERIC Educational Resources Information Center

Ticknor, Anne Swenson; Schwartz, Catherine Stein

2017-01-01

As beginning teachers encounter their first classrooms, they struggle to enact curriculum and negotiate expectations of local context with their visions of "good teaching." This article is a qualitative research design utilizing interview data and narrative analysis to examine the storied experiences of beginning teacher participants…

A Cognitively-Based Communication Curriculum for Persons with Multiple Handicaps Functioning between 0-24 Months Developmentally.

ERIC Educational Resources Information Center

McMullen, Victoria B.

This curriculum provides a sequence of activities designed to help develop cognitive and communication skills in severely and profoundly multi-handicapped individuals who are functioning between 0 and 24 months. Based on the principles that communication begins at birth and that educational programming must begin at the point where the handicapped…

Multi-Dimensional Trust: How Beginning Principals Build Trust with Their Staff during Leader Succession

ERIC Educational Resources Information Center

Northfield, Shawn

2014-01-01

As part of principal succession, new school leaders must take action to solidify their position as the school's legitimate lead authority while at the same time, develop and utilize interactive mechanisms designed to nurture staff relations and engender teacher support and confidence in their leadership. For beginning principals, this process…

Verbal and Non-verbal Fluency in Adults with Developmental Dyslexia: Phonological Processing or Executive Control Problems?

PubMed

Smith-Spark, James H; Henry, Lucy A; Messer, David J; Zięcik, Adam P

2017-08-01

The executive function of fluency describes the ability to generate items according to specific rules. Production of words beginning with a certain letter (phonemic fluency) is impaired in dyslexia, while generation of words belonging to a certain semantic category (semantic fluency) is typically unimpaired. However, in dyslexia, verbal fluency has generally been studied only in terms of overall words produced. Furthermore, performance of adults with dyslexia on non-verbal design fluency tasks has not been explored but would indicate whether deficits could be explained by executive control, rather than phonological processing, difficulties. Phonemic, semantic and design fluency tasks were presented to adults with dyslexia and without dyslexia, using fine-grained performance measures and controlling for IQ. Hierarchical regressions indicated that dyslexia predicted lower phonemic fluency, but not semantic or design fluency. At the fine-grained level, dyslexia predicted a smaller number of switches between subcategories on phonemic fluency, while dyslexia did not predict the size of phonemically related clusters of items. Overall, the results suggested that phonological processing problems were at the root of dyslexia-related fluency deficits; however, executive control difficulties could not be completely ruled out as an alternative explanation. Developments in research methodology, equating executive demands across fluency tasks, may resolve this issue. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Klein tunneling phenomenon with pair creation process

NASA Astrophysics Data System (ADS)

Wu, G. Z.; Zhou, C. T.; Fu, L. B.

2018-01-01

In this paper, we study the Klein tunneling phenomenon with electron-positron pair creation process. Pairs can be created from the vacuum by a supercritical single-well potential (for electrons). In the time region, the time-dependent growth pattern of the created pairs can be characterized by four distinct regimes which can be considered as four different statuses of the single well. We find that if positrons penetrate the single well by Klein tunneling in different statuses, the total number of the tunneling positrons will be different. If Klein tunneling begins at the initial stage of the first status i.e. when the sing well is empty, the tunneling process and the total number of tunneling positrons are similar to the traditional Klein tunneling case without considering the pair creation process. As the tunneling begins later, the total tunneling positron number increases. The number will finally settle to an asymptotic value when the tunneling begins later than the settling-down time t s of the single well which has been defined in this paper.

Inspection of cup-shaped steel parts from the I.D. side using eddy current

NASA Astrophysics Data System (ADS)

Griffiths, Erick W.; Pearson, Lee H.

2018-04-01

An eddy current method was developed to inspect cup-shaped steel parts from the I.D. side. During the manufacturing process of these parts, a thin Al tape foil is applied to the I.D. side of the part. One of the critical process parameters is that only one foil layer can be applied. An eddy current inspection system was developed to reject parts with more than one foil layer. The Al tape foil is cut to length to fit the inner diameter, however, after application of the foil there is a gap created between the beginning and end of the foil. It was found that this gap interfered with the eddy current inspection causing a false positive indication. To solve this problem a sensor design and data analysis process were developed to overcome the effects of these gaps. The developed system incorporates simultaneous measurements from multiple eddy current sensors and signal processing to achieve a reliable inspection.

From conceptual modeling to a map

NASA Astrophysics Data System (ADS)

Gotlib, Dariusz; Olszewski, Robert

2018-05-01

Nowadays almost every map is a component of the information system. Design and production of maps requires the use of specific rules for modeling information systems: conceptual, application and data modelling. While analyzing various stages of cartographic modeling the authors ask the question: at what stage of this process a map occurs. Can we say that the "life of the map" begins even before someone define its form of presentation? This question is particularly important at the time of exponentially increasing number of new geoinformation products. During the analysis of the theory of cartography and relations of the discipline to other fields of knowledge it has been attempted to define a few properties of cartographic modeling which distinguish the process from other methods of spatial modeling. Assuming that the map is a model of reality (created in the process of cartographic modeling supported by domain-modeling) the article proposes an analogy of the process of cartographic modeling to the scheme of conceptual modeling presented in ISO 19101 standard.

The Development of Dispatcher Training Simulator in a Thermal Energy Generation System

NASA Astrophysics Data System (ADS)

Hakim, D. L.; Abdullah, A. G.; Mulyadi, Y.; Hasan, B.

2018-01-01

A dispatcher training simulator (DTS) is a real-time Human Machine Interface (HMI)-based control tool that is able to visualize industrial control system processes. The present study was aimed at developing a simulator tool for boilers in a thermal power station. The DTS prototype was designed using technical data of thermal power station boilers in Indonesia. It was then designed and implemented in Wonderware Intouch 10. The resulting simulator came with component drawing, animation, control display, alarm system, real-time trend, historical trend. This application used 26 tagnames and was equipped with a security system. The test showed that the principles of real-time control worked well. It is expected that this research could significantly contribute to the development of thermal power station, particularly in terms of its application as a training simulator for beginning dispatchers.

What's Missing in Design Education Today?

ERIC Educational Resources Information Center

Frascara, Jorge; Noel, Guillermina

2012-01-01

This article begins by describing a desirable design approach that is only practiced by a few designers today. This design approach is desirable because it responds to a society that suffers from a number of illnesses due to communications and artifacts that do not satisfy the needs of people. The article then proposes the kind of design education…

Determining the Cost of Producing Ethanol from Corn Starch and Lignocellulosic Feedstocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

McAloon, A.; Taylor, F.; Yee, W.

2000-10-25

The mature corn-to-ethanol industry has many similarities to the emerging lignocellulose-to-ethanol industry. It is certainly possible that some of the early practitioners of this new technology will be the current corn ethanol producers. In order to begin to explore synergies between the two industries, a joint project between two agencies responsible for aiding these technologies in the Federal government was established. This joint project of the USDA-ARS and DOE/NREL looked at the two processes on a similar process design and engineering basis, and will eventually explore ways to combine them. This report describes the comparison of the processes, each producingmore » 25 million annual gallons of fuel ethanol. This paper attempts to compare the two processes as mature technologies, which requires assuming that the technology improvements needed to make the lignocellulosic process commercializable are achieved, and enough plants have been built to make the design well-understood. Ass umptions about yield and design improvements possible from continued research were made for the emerging lignocellulose process. In order to compare the lignocellulose-to-ethanol process costs with the commercial corn-to-ethanol costs, it was assumed that the lignocellulose plant was an Nth generation plant, built after the industry had been sufficiently established to eliminate first-of-a-kind costs. This places the lignocellulose plant costs on a similar level with the current, established corn ethanol industry, whose costs are well known. The resulting costs of producing 25 million annual gallons of fuel ethanol from each process were determined. The figure below shows the production cost breakdown for each process. The largest cost contributor in the corn starch process is the feedstock; for the lignocellulosic process it is the capital cost, which is represented by depreciation cost on an annual basis.« less

The Future of Pharmaceutical Manufacturing Sciences

PubMed Central

2015-01-01

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial‐scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state‐of‐art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular‐based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot‐melt processing and printing‐based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:3612–3638, 2015 PMID:26280993

The Future of Pharmaceutical Manufacturing Sciences.

PubMed

Rantanen, Jukka; Khinast, Johannes

2015-11-01

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular-based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association.

Designing Needs Statements in a Systematic Iterative Way

ERIC Educational Resources Information Center

Verstegen, D. M. L.; Barnard, Y. F.; Pilot, A.

2009-01-01

Designing specifications for technically advanced instructional products, such as e-learning, simulations or simulators requires different kinds of expertise. The SLIM method proposes to involve all stakeholders from the beginning in a series of workshops under the guidance of experienced instructional designers. These instructional designers…

Design and analysis of automobile components using industrial procedures

NASA Astrophysics Data System (ADS)

Kedar, B.; Ashok, B.; Rastogi, Nisha; Shetty, Siddhanth

2017-11-01

Today’s automobiles depend upon mechanical systems that are crucial for aiding in the movement and safety features of the vehicle. Various safety systems such as Antilock Braking System (ABS) and passenger restraint systems have been developed to ensure that in the event of a collision be it head on or any other type, the safety of the passenger is ensured. On the other side, manufacturers also want their customers to have a good experience while driving and thus aim to improve the handling and the drivability of the vehicle. Electronics systems such as Cruise Control and active suspension systems are designed to ensure passenger comfort. Finally, to ensure optimum and safe driving the various components of a vehicle must be manufactured using the latest state of the art processes and must be tested and inspected with utmost care so that any defective component can be prevented from being sent out right at the beginning of the supply chain. Therefore, processes which can improve the lifetime of their respective components are in high demand and much research and development is done on these processes. With a solid base research conducted, these processes can be used in a much more versatile manner for different components, made up of different materials and under different input conditions. This will help increase the profitability of the process and also upgrade its value to the industry.

Strategic Planning for Independent Schools.

ERIC Educational Resources Information Center

Stone, Susan C.

This manual is intended to serve independent schools beginning strategic planning methods. Chapter 1, "The Case for Strategic Planning," suggests replacing the term "long range planning" with the term "strategic planning," which emphasizes change. The strategic planning and policy development process begins with…

Design Practices and Misconceptions: Helping Beginners in Engineering Design

ERIC Educational Resources Information Center

Crismond, David

2013-01-01

This article describes beginner habits and misconceptions related to design practices. Once teachers are aware of these habits and misconceptions, they can more easily recognize them and work to remedy them through instruction. Presented herein are eight practice habits. Each item begins with the practice, describes a related design habit or…

The Importance of Longitudinal Pretest-Posttest Designs in Estimating College Impact

ERIC Educational Resources Information Center

Seifert, Tricia A.; Pascarella, Ernest T.; Erkel, Sherri I.; Goodman, Kathleen M.

2010-01-01

In this chapter, the authors discuss the issue of research design in conducting inquiry on college impact and demonstrate the importance of longitudinal pretest-posttest designs in maximizing the internal validity of findings. They begin by discussing the strengths and weaknesses of different types of research design in the college impact…

America's First Universal Design "Smart" Home

ERIC Educational Resources Information Center

Schwab, Charles M.

2009-01-01

By providing a $20,000 tax credit for Universal Design (UD) housing, when new housing construction begins anew, the United States has a real opportunity to save hundreds of billions of dollars in long-term healthcare while encouraging long-term economic growth. Universal Design (also known as Inclusive Design or "Aging in Place" when referring to…

Design Thinking for School Leaders: Five Roles and Mindsets That Ignite Positive Change

ERIC Educational Resources Information Center

Gallagher, Alyssa; Thordarson, Kami

2018-01-01

"Design is the rendering of intent." What if education leaders approached their work with the perspective of a designer? This new perspective of seeing the world differently is desperately needed in schools and begins with school leadership. Alyssa Gallagher and Kami Thordarson, widely recognized experts on Design Thinking, educational…

Developing Ultra-small Scale Mechanical Testing Methods and Microstructural Investigation Procedures for Irradiated Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hosemann, Peter; Kaoumi, Djamel

Nuclear materials are an essential aspect of nuclear engineering. While great effort is spent on designing more advanced reactors or enhancing a reactor’s safety, materials have been the bottleneck of most new developments. The designs of new reactor concepts are driven by neutronic and thermodynamic aspects, leading to unusual coolants (liquid metal, liquid salt, gases), higher temperatures, and higher radiation doses than conventional light water reactors have. However, any (nuclear) engineering design must consider the materials used in the anticipated application in order to ever be realized. Designs which may look easy, simple and efficient considering thermodynamics or neutronic aspectsmore » can show their true difficulty in the materials area, which then prevents them from being deployed. In turn, the materials available are influencing the neutronic and thermodynamic designs and therefore must be considered from the beginning, requiring close collaborations between different aspects of nuclear engineering. If a particular design requires new materials, the licensing of the reactor must be considered, but licensing can be a costly and time consuming process that results in long lead times to realize true materials innovation.« less

KSC-2010-4508

NASA Image and Video Library

2010-08-27

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the protective panels that covered the Alpha Magnetic Spectrometer, or AMS, have been removed so that the technicians can begin preparing it for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. The STS-134 crew will fly AMS to the International Space Station aboard space shuttle Endeavour, targeted to launch Feb. 26, 2011. Photo credit: NASA/Frankie Martin

Consensus standards for introductory e-learning courses in human participants research ethics

PubMed Central

Williams, John R; Sprumont, Dominique; Hirtle, Marie; Adebamowo, Clement; Braunschweiger, Paul; Bull, Susan; Burri, Christian; Czarkowski, Marek; Te Fan, Chien; Franck, Caroline; Gefenas, Eugenjius; Geissbuhler, Antoine; Klingmann, Ingrid; Kouyaté, Bocar; Kraehenbhul, Jean-Pierre; Kruger, Mariana; Moodley, Keymanthri; Ntoumi, Francine; Nyirenda, Thomas; Pym, Alexander; Silverman, Henry; Tenorio, Sara

2015-01-01

This paper reports the results of a workshop held in January 2013 to begin the process of establishing standards for e-learning programmes in the ethics of research involving human participants that could serve as the basis of their evaluation by individuals and groups who want to use, recommend or accredit such programmes. The standards that were drafted at the workshop cover the following topics: designer/provider qualifications, learning goals, learning objectives, content, methods, assessment of participants and assessment of the course. The authors invite comments on the draft standards and eventual endorsement of a final version by all stakeholders. PMID:23959838

Earth observing system - Concepts and implementation strategy

NASA Technical Reports Server (NTRS)

Hartle, R. E.

1986-01-01

The concepts of an Earth Observing System (EOS), an information system being developed by the EOS Science and Mission Requirements Working Group for international use and planned to begin in the 1990s, are discussed. The EOS is designed to study the factors that control the earth's hydrologic cycle, biochemical cycles, and climatologic processes by combining the measurements from remote sensing instruments, in situ measurement devices, and a data and information system. Three EOS platforms are planned to be launched into low, polar, sun-synchronous orbits during the Space Station's Initial Operating Configuration, one to be provided by ESA and two by the United States.

A science and technology initiative within the office of civilian radioactive waste management

USGS Publications Warehouse

Budnitz, R.J.; Kiess, T.E.; Peters, M.; Duncan, D.

2003-01-01

In 2002, by following a national decision-making process that had been specified in the 1982 Nuclear Waste Policy Act, Yucca Mountain (YM) was designated as the site for the nation's geologic repository for commercial spent nuclear fuel (SNF). The U.S. Department of Energy's (DOE's) Office of Civilian Radioactive Waste Management (OCRWM) must now obtain regulatory approval to construct and operate a repository there, and to develop transportation and infrastructure needed to support operations. The OCRWM has also recently begun a separate Science and Technology (S&T) initiative, whose purposes, beginnings, current projects, and future plans are described here.

Small scale sequence automation pays big dividends

NASA Technical Reports Server (NTRS)

Nelson, Bill

1994-01-01

Galileo sequence design and integration are supported by a suite of formal software tools. Sequence review, however, is largely a manual process with reviewers scanning hundreds of pages of cryptic computer printouts to verify sequence correctness. Beginning in 1990, a series of small, PC based sequence review tools evolved. Each tool performs a specific task but all have a common 'look and feel'. The narrow focus of each tool means simpler operation, and easier creation, testing, and maintenance. Benefits from these tools are (1) decreased review time by factors of 5 to 20 or more with a concomitant reduction in staffing, (2) increased review accuracy, and (3) excellent returns on time invested.

Web-based document image processing

NASA Astrophysics Data System (ADS)

Walker, Frank L.; Thoma, George R.

1999-12-01

Increasing numbers of research libraries are turning to the Internet for electron interlibrary loan and for document delivery to patrons. This has been made possible through the widespread adoption of software such as Ariel and DocView. Ariel, a product of the Research Libraries Group, converts paper-based documents to monochrome bitmapped images, and delivers them over the Internet. The National Library of Medicine's DocView is primarily designed for library patrons are beginning to reap the benefits of this new technology, barriers exist, e.g., differences in image file format, that lead to difficulties in the use of library document information. To research how to overcome such barriers, the Communications Engineering Branch of the Lister Hill National Center for Biomedical Communications, an R and D division of NLM, has developed a web site called the DocMorph Server. This is part of an ongoing intramural R and D program in document imaging that has spanned many aspects of electronic document conversion and preservation, Internet document transmission and document usage. The DocMorph Server Web site is designed to fill two roles. First, in a role that will benefit both libraries and their patrons, it allows Internet users to upload scanned image files for conversion to alternative formats, thereby enabling wider delivery and easier usage of library document information. Second, the DocMorph Server provides the design team an active test bed for evaluating the effectiveness and utility of new document image processing algorithms and functions, so that they may be evaluated for possible inclusion in other image processing software products being developed at NLM or elsewhere. This paper describes the design of the prototype DocMorph Server and the image processing functions being implemented on it.

Evaluation of programs to improve complementary feeding in infants and young children.

PubMed

Frongillo, Edward A

2017-10-01

Evaluation of complementary feeding programs is needed to enhance knowledge on what works, to document responsible use of resources, and for advocacy. Evaluation is done during program conceptualization and design, implementation, and determination of effectiveness. This paper explains the role of evaluation in the advancement of complementary feeding programs, presenting concepts and methods and illustrating them through examples. Planning and investments for evaluations should occur from the beginning of the project life cycle. Essential to evaluation is articulation of a program theory on how change would occur and what program actions are required for change. Analysis of program impact pathways makes explicit the dynamic connections in the program theory and accounts for contextual factors that could influence program effectiveness. Evaluating implementation functioning is done through addressing questions about needs, coverage, provision, and utilization using information obtained from process evaluation, operations research, and monitoring. Evaluating effectiveness is done through assessing impact, efficiency, coverage, process, and causality. Plausibility designs ask whether the program seemed to have an effect above and beyond external influences, often using a nonrandomized control group and baseline and end line measures. Probability designs ask whether there was an effect using a randomized control group. Evaluations may not be able to use randomization, particularly for programs implemented at a large scale. Plausibility designs, innovative designs, or innovative combinations of designs sometimes are best able to provide useful information. Further work is needed to develop practical designs for evaluation of large-scale country programs on complementary feeding. © 2017 John Wiley & Sons Ltd.

Planning, implementation and optimization of future space missions using an immersive visualization environment (IVE) machine

NASA Astrophysics Data System (ADS)

Nathan Harris, E.; Morgenthaler, George W.

2004-07-01

Beginning in 1995, a team of 3-D engineering visualization experts assembled at the Lockheed Martin Space Systems Company and began to develop innovative virtual prototyping simulation tools for performing ground processing and real-time visualization of design and planning of aerospace missions. At the University of Colorado, a team of 3-D visualization experts also began developing the science of 3-D visualization and immersive visualization at the newly founded British Petroleum (BP) Center for visualization, which began operations in October, 2001. BP acquired ARCO in the year 2000 and awarded the 3-D flexible IVE developed by ARCO (beginning in 1990) to the University of Colorado, CU, the winner in a competition among 6 Universities. CU then hired Dr. G. Dorn, the leader of the ARCO team as Center Director, and the other experts to apply 3-D immersive visualization to aerospace and to other University Research fields, while continuing research on surface interpretation of seismic data and 3-D volumes. This paper recounts further progress and outlines plans in Aerospace applications at Lockheed Martin and CU.

Developmental studies of the hippocampus and hippocampal-dependent behaviors: insights from interdisciplinary studies and tips for new investigators.

PubMed

Albani, Sarah H; McHail, Daniel G; Dumas, Theodore C

2014-06-01

The hippocampus is not fully developed at birth and, with respect to spatial cognition, only begins to show signs of adult-like function at three postnatal weeks in rodents. Studying the developmental period spanning roughly two to four weeks of age permits an understanding of the neural framework necessary for the emergence of spatial navigation and, quite possibly, human episodic memory. However, due to developmental factors, behavior data collection and interpretation can be severely compromised if inappropriate designs are applied. As such, we propose methodological considerations for the behavioral assessment of hippocampal function in developing rats that take into account animal size, growth rate, and sensory and motor ability. We further summarize recent key interdisciplinary studies that are beginning to unravel the molecular machinery and physiological alterations responsible for hippocampal maturation. In general, hippocampal development is a protracted process during which unique contributions to spatial cognition and complex recognition memory come "on line" at different postnatal ages creating a unique situation for elucidating the neural bases of specific components of higher cognitive abilities. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developmental studies of the hippocampus and hippocampal-dependent behaviors: Insights from interdisciplinary studies and tips for new investigators

PubMed Central

Albani, Sarah H.; McHail, Daniel G.; Dumas, Theodore C.

2016-01-01

The hippocampus is not fully developed at birth and, with respect to spatial cognition, only begins to show signs of adult-like function at three postnatal weeks in rodents. Studying the developmental period spanning roughly two to four weeks of age permits an understanding of the neural framework necessary for the emergence of spatial navigation and, quite possibly, human episodic memory. However, due to developmental factors, behavior data collection and interpretation can be severely compromised if inappropriate designs are applied. As such, we propose methodological considerations for the behavioral assessment of hippocampal function in developing rats that take into account animal size, growth rate, and sensory and motor ability. We further summarize recent key interdisciplinary studies that are beginning to unravel the molecular machinery and physiological alterations responsible for hippocampal maturation. In general, hippocampal development is a protracted process during which unique contributions to spatial cognition and complex recognition memory come “on line” at different postnatal ages creating a unique situation for elucidating the neural bases of specific components of higher cognitive abilities. PMID:24769291

Draft standard for color AMLCDs in U.S. military aircraft

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.; Dolezal, William K.; Schur, Keith; Liccione, John W.

1994-06-01

Flight instruments have begun to use color active liquid crystal displays (AMLCDs), signaling the beginning of a significant transition from electromechanical and cathode ray tube display designs to AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and gray scale-capable, high-pixel-count, flat-panel displays for weapon systems. The Wright Laboratory is leading the development of standard and specification documentation for this new generation of display modules based on requirements for U.S. military aircraft. These requirements are similar in many ways to those of both the civil aviation and automotive industries. Accordingly, commonality with these applications is incorporated, where possible, along with the requirements for all military combat applications. Industry and government organizations are involved in this process through workshops and draft review processes. Military procurement specifications for combat system applications may use this information as a source of recommended best practice for this new generation of digital flat panel displays. The draft standard will be revised based upon continuing feedback by early 1995.

STS-48 official crew insignia

NASA Image and Video Library

1999-08-27

STS048-S-001 (July 1991) --- Designed by the astronaut crew members, the patch represents the space shuttle orbiter Discovery in orbit about Earth after deploying the Upper Atmospheric Research Satellite (UARS) depicted in block letter style. The stars are those in the northern hemisphere as seen in the fall and winter when UARS will begin its study of Earth's atmosphere. The color bands on Earth's horizon, extending up to the UARS spacecraft, depict the study of Earth's atmosphere. The triangular shape represents the relationship among the three atmospheric processes that determine upper atmospheric structure and behavior: chemistry, dynamics and energy. In the words of the crew members, "This continuous process brings life to our planet and makes our planet unique in the solar system." The NASA insignia design for space shuttle flights is reserved for use by the astronauts and for other official use as the NASA Administrator may authorize. Public availability has been approved only in the form of illustrations by the various news media. When and if there is any change in this policy, which is not anticipated, it will be publicly announced. Photo credit: NASA

Iterating between Tools to Create and Edit Visualizations.

PubMed

Bigelow, Alex; Drucker, Steven; Fisher, Danyel; Meyer, Miriah

2017-01-01

A common workflow for visualization designers begins with a generative tool, like D3 or Processing, to create the initial visualization; and proceeds to a drawing tool, like Adobe Illustrator or Inkscape, for editing and cleaning. Unfortunately, this is typically a one-way process: once a visualization is exported from the generative tool into a drawing tool, it is difficult to make further, data-driven changes. In this paper, we propose a bridge model to allow designers to bring their work back from the drawing tool to re-edit in the generative tool. Our key insight is to recast this iteration challenge as a merge problem - similar to when two people are editing a document and changes between them need to reconciled. We also present a specific instantiation of this model, a tool called Hanpuku, which bridges between D3 scripts and Illustrator. We show several examples of visualizations that are iteratively created using Hanpuku in order to illustrate the flexibility of the approach. We further describe several hypothetical tools that bridge between other visualization tools to emphasize the generality of the model.

Importance of the advance directive and the beginning of the dying process from the point of view of German doctors and judges dealing with guardianship matters: results of an empirical survey.

PubMed

van Oorschot, B; Simon, A

2006-11-01

To analyse and compare the surveys on German doctors and judges on end of life decision making regarding their attitudes on the advance directive and on the dying process. The respondents were to indicate their agreement or disagreement to eight statements on the advance directive and to specify their personal view on the beginning of the dying process. 727 doctors (anaesthetists or intensive-care physicians, internal specialists and general practitioners) in three federal states and 469 judges dealing with guardianship matters all over Germany. Comparisons of means, analyses of variance, pivot tables (chi(2) test) and factor analyses (varimax with Kaiser normalisation). Three attitude groups on advance directive were disclosed by the analysis: the decision model, which emphasises the binding character of a situational advance directive; the deliberation model, which puts more emphasis on the communicative aspect; and the delegation model, which regards the advance directive as a legal instrument. The answers regarding the beginning of the dying process were broadly distributed, but no marked difference was observed between the responding professions. The dying process was assumed by most participants to begin with a life expectancy of only a few days. A high degree of valuation for advance directive was seen in both German doctors and judges; most agreed to the binding character of the situational directive. Regarding the different individual concepts of the dying process, a cross-professional discourse on the contents of this term seems to be overdue.

Solar 2 Green Energy, Arts & Education Center. Final Scientific/Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paquette, Jamie C; Collins, Christopher J

The Solar 2 Green Energy, Arts and Education Center is an 8,000 sq.ft. demonstration project that will be constructed to Platinum LEED certification and will be the first carbon-neutral, net-zero energy use public building in New York City, giving it local and national appeal. Employing green building features and holistic engineering practices throughout its international award-winning design, Solar 2 will be powered by a 90kW photovoltaic (PV) array in conjunction with a geothermal heating and cooling system and a high efficient design that seeks to reduce the overall energy load of the building. Solar 2 will replace our current 500more » sq.ft. prototype facility - known as Solar 1 - as the educational and cultural centerpiece of a five-block public greenway on the East River in Stuyvesant Cove Park, located along two acres of public riverfront on a newly reclaimed, former brownfield in lower Manhattan. Designed as a public-use complex for year-round environmental education exhibits and onsite activities for all ages and backgrounds, Solar 2 will demonstrate energy-efficiency technologies and sustainable environmental practices available now to all urban residents, eco-tourists, teachers, and students alike. Showcasing one of Solar 2's most striking design elements is the PV roof array with a cafe and river vistas for miles of New York City's skylines. Capping the building as a solar-powered landmark, and visible from the FDR Drive, the PV array is also designed to provide visitors below a view of the solar roof when standing outside, as well as directly underneath it. Recognized by an international jury of architects, civil engineers and urban designers by the Swiss-based Holcim Foundation, the Solar 2 design was awarded the prestigious Holcim North American 2008 Gold Award for Sustainable Construction for innovative, future-oriented and tangible sustainable construction projects, selected from more than 1900 entries. Funding from the Department of Energy was provided to assist with the ongoing design work of Solar 2, including architecture, engineering and the development of construction specifications. The work performed during the project period brought this process as far along as it could go pending the raising of funds to begin construction of the building. Once those funds are secured, we will finalize any additional details needed before beginning the bidding process and then moving into construction. DOE's funding was extremely valuable in helping Solar One determine the feasibility of a net-zero construction on the site and allowed for the design to project to meet the high standards necessary for LEED Platinum status.« less

Building Operations Efficiencies into NASA's Crew Launch Vehicle Design

NASA Technical Reports Server (NTRS)

Dumbacher, Daniel L.

2006-01-01

The U.S. Vision for Space Exploration guides NASA's challenging missions of technological innovation and scientific investigation. With the Agency's commitment to complete the International Space Station (ISS) and to retire the Space Shuttle by 2010, the NASA Administrator commissioned the Exploration Systems Architecture Study (ESAS) in mid 2005 to analyze options for a safer, simpler, more cost efficient launch system that could deliver timely human-rated space transportation capabilities. NASA's finite resources yield discoveries with infinite possibilities. As the Agency begins the process of replacing the Shuttle with new launch vehicles destined for missions beyond low-Earth orbit to the Moon and Mars, NASA is designing the follow-on crew and cargo systems for maximum operational efficiencies. This mandate is imperative to reduce the $4.5 billion NASA spends on space transportation each year. This paper gives top-level details of how the follow-on Crew Launch Vehicle (CLV) is being designed for reduced lifecycle costs as a primary catalyst for the expansion of future frontiers.

Supporting Beginning Teacher Planning and Enactment of Investigation-based Science Discussions: The Design and Use of Tools within Practice-based Teacher Education

NASA Astrophysics Data System (ADS)

Kademian, Sylvie M.

Current reform efforts prioritize science instruction that provides opportunities for students to engage in productive talk about scientific phenomena. Given the challenges teachers face enacting instruction that integrates science practices and science content, beginning teachers need support to develop the knowledge and teaching practices required to teach reform-oriented science lessons. Practice-based teacher education shows potential for supporting beginning teachers while they are learning to teach in this way. However, little is known about how beginning elementary teachers draw upon the types of support and tools associated with practice-based teacher education to learn to successfully enact this type of instruction. This dissertation addresses this gap by investigating how a practice-based science methods course using a suite of teacher educator-provided tools can support beginning teachers' planning and enactment of investigation-based science lessons. Using qualitative case study methodologies, this study drew on video-records, lesson plans, class assignments, and surveys from one cohort of 22 pre-service teachers (called interns in this study) enrolled in a year-long elementary education master of the arts and teaching certification program. Six focal interns were also interviewed at multiple time-points during the methods course. Similarities existed across the types of tools and teaching practices interns used most frequently to plan and enact investigation-based discussions. For the focal interns, use of four synergistic teaching practices throughout the lesson enactments (including consideration of students' initial ideas; use of open-ended questions to elicit, extend, and challenge ideas; connecting across students' ideas and the disciplinary core ideas; and use of a representation to organize and highlight students' ideas) appeared to lead to increased opportunities for students to share their ideas and engage in data analysis, argumentation and explanation construction. Student opportunities to engage in practices that prioritize scientific discourse also occurred when interns were using dialogic voice and the tools designed to foster development of teacher knowledge for facilitating investigation-based science discussions. However, several intern characteristics likely moderated or mediated intern use of tools, dialogic voice, and productive teaching practices to capitalize on student contributions. These characteristics included intern knowledge of the science content and practices and initial beliefs about science teaching. Missed opportunities to use a combination of several teaching practices and tools designed to foster the development of knowledge for science teaching resulted in fewer opportunities for students to engage in data analysis, argumentation based on evidence, and construction of scientific explanations. These findings highlight the potential of teacher-educator provided tools for supporting beginning teachers in learning to facilitate investigation-based discussions that capitalize on student contributions. These findings also help the field conceptualize how beginning teachers use tools and teaching practices to plan and enact investigation-based science lessons, and how intern characteristics relate to tool use and planned and enacted lessons. By analyzing the investigation-based science lessons holistically, this study begins to unpack the complexities of facilitating investigation-based discussions including the interplay between intern characteristics and tool use, and the ways intern engagement in synergistic teaching practices provide opportunities for students to engage in data analysis, explanation construction, and argumentation. This study also describes methodological implications for this type of whole-lesson analysis and comments on the need for further research investigating beginning teachers' use of tools over time. Finally, I propose the need for iterative design of scaffolds to further support beginning teacher facilitation of investigation-based science lessons.

When Traditional Won't Do: Experiences from a "Lower-Level" Mathematics Classroom

ERIC Educational Resources Information Center

Hill, Crystal

2010-01-01

As the last bell rings, students scurry to their respective classrooms, doors begin to close, and the class period begins. Imagine that you are in the hallway of the school and you look into an advanced mathematics class, into an Algebra I, Part I, mathematics class (a course designed for students who have not found success in mathematics). What…

Project S.P.I.C.E. Special Partnership in Career Education. Decision Making/Beginning Competency. A Teaching Module.

ERIC Educational Resources Information Center

Volusia County Schools, Daytona Beach, FL.

This fourth in a series of six teaching modules on decision making/beginning competency is part of the Special Partnership in Career Education (SPICE) program, which was designed to provide career awareness and exploration information to junior high-aged educable mentally handicapped students. The module follows a typical format that includes two…

Editor in Chief[R] Beginning: Grammar Disasters and Punctuation Faux Pas.

ERIC Educational Resources Information Center

Beckwith, Carrie; Block, Cheryl; Broz, Christine; Hockett, Margaret; White, David

This workbook is designed as an introduction to the "Editor in Chief" series, which reinforces the rules of written English. In this workbook, student first review the rules of grammar and mechanics using multiple-choice questions; then the students learn to apply these rules in context by editing stories in a variety of formats. This "Beginning"…

A Community-Based Intervention to Prevent Obesity Beginning at Birth among American Indian Children: Study Design and Rationale for the PTOTS Study

ERIC Educational Resources Information Center

Karanja, Njeri; Aickin, Mikel; Lutz, Tam; Mist, Scott; Jobe, Jared B.; Maupome, Gerardo; Ritenbaugh, Cheryl

2012-01-01

Eating and physical activity behaviors associated with adult obesity have early antecedents, yet few studies have focused on obesity prevention interventions targeting very young children. Efforts to prevent obesity beginning at birth seem particularly important in populations at risk for early-onset obesity. National estimates indicate that…

Social Experiences of Beginning Braille Readers in Literacy Activities: Qualitative and Quantitative Findings of the ABC Braille Study

ERIC Educational Resources Information Center

Sacks, Sharon Z.; Kamei-Hannan, Cheryl; Erin, Jane N.; Barclay, Lizbeth; Sitar, Debbie

2009-01-01

This mixed-design investigation examined the social experiences of beginning braille readers who were initially taught contracted or alphabetic braille in literacy activities as part of the ABC Braille Study. No differences in the quality or quantity of social experiences were found between the two groups over time. (Contains 4 tables.)

An Investigation of the Relationship between Factors of Beginning Teachers' Development within a Mentor-Based Induction Program

ERIC Educational Resources Information Center

Davis, James Kenny

2017-01-01

This dissertation was a quantitative, correlational study that examined the impact of the mentor component of a mentor-based induction program on three factors of new teacher development and support. The focus of this study was on beginning teachers participating in a district-supported mentoring program designed to support and acclimate teachers…

Integrating Design Disciplines: Understanding the Potential for and Factors Affecting the Success of Interdisciplinary Design Education for Architecture and Landscape Architecture

ERIC Educational Resources Information Center

Koo, Tae Seo

2012-01-01

Interdisciplinary design education is becoming more important as design disciplines need various perspectives and solutions. However, only a limited amount of research has been done in regard to interdisciplinary design education. The goal of this study is to begin to answer the question about how designers and researchers develop and improve…

Basic principles of stability.

PubMed

Egan, William; Schofield, Timothy

2009-11-01

An understanding of the principles of degradation, as well as the statistical tools for measuring product stability, is essential to management of product quality. Key to this is management of vaccine potency. Vaccine shelf life is best managed through determination of a minimum potency release requirement, which helps assure adequate potency throughout expiry. Use of statistical tools such a least squares regression analysis should be employed to model potency decay. The use of such tools provides incentive to properly design vaccine stability studies, while holding stability measurements to specification presents a disincentive for collecting valuable data. The laws of kinetics such as Arrhenius behavior help practitioners design effective accelerated stability programs, which can be utilized to manage stability after a process change. Design of stability studies should be carefully considered, with an eye to minimizing the variability of the stability parameter. In the case of measuring the degradation rate, testing at the beginning and the end of the study improves the precision of this estimate. Additional design considerations such as bracketing and matrixing improve the efficiency of stability evaluation of vaccines.

Spatial issues in user interface design from a graphic design perspective

NASA Technical Reports Server (NTRS)

Marcus, Aaron

1989-01-01

The user interface of a computer system is a visual display that provides information about the status of operations on data within the computer and control options to the user that enable adjustments to these operations. From the very beginning of computer technology the user interface was a spatial display, although its spatial features were not necessarily complex or explicitly recognized by the users. All text and nonverbal signs appeared in a virtual space generally thought of as a single flat plane of symbols. Current technology of high performance workstations permits any element of the display to appear as dynamic, multicolor, 3-D signs in a virtual 3-D space. The complexity of appearance and the user's interaction with the display provide significant challenges to the graphic designer of current and future user interfaces. In particular, spatial depiction provides many opportunities for effective communication of objects, structures, processes, navigation, selection, and manipulation. Issues are presented that are relevant to the graphic designer seeking to optimize the user interface's spatial attributes for effective visual communication.

Project STOP (Spectral Thermal Optimization Program)

NASA Technical Reports Server (NTRS)

Goldhammer, L. J.; Opjorden, R. W.; Goodelle, G. S.; Powe, J. S.

1977-01-01

The spectral thermal optimization of solar cell configurations for various solar panel applications is considered. The method of optimization depends upon varying the solar cell configuration's optical characteristics to minimize panel temperatures, maximize power output and decrease the power delta from beginning of life to end of life. Four areas of primary investigation are: (1) testing and evaluation of ultraviolet resistant coverslide adhesives, primarily FEP as an adhesive; (2) examination of solar cell absolute spectral response and corresponding cell manufacturing processes that affect it; (3) experimental work with solar cell manufacturing processes that vary cell reflectance (solar absorptance); and (4) experimental and theoretical studies with various coverslide filter designs, mainly a red rejection filter. The Hughes' solar array prediction program has been modified to aid in evaluating the effect of each of the above four areas on the output of a solar panel in orbit.

Physics and psychophysics of color reproduction

NASA Astrophysics Data System (ADS)

Giorgianni, Edward J.

1991-08-01

The successful design of a color-imaging system requires knowledge of the factors used to produce and control color. This knowledge can be derived, in part, from measurements of the physical properties of the imaging system. Color itself, however, is a perceptual response and cannot be directly measured. Though the visual process begins with physics, as radiant energy reaching the eyes, it is in the mind of the observer that the stimuli produced from this radiant energy are interpreted and organized to form meaningful perceptions, including the perception of color. A comprehensive understanding of color reproduction, therefore, requires not only a knowledge of the physical properties of color-imaging systems but also an understanding of the physics, psychophysics, and psychology of the human observer. The human visual process is quite complex; in many ways the physical properties of color-imaging systems are easier to understand.

Design of a micro-Wankel rotary engine for MEMS fabrication

NASA Astrophysics Data System (ADS)

Jiang, Kyle C.; Prewett, Philip D.; Ward, M. C. L.; Tian, Y.; Yang, H.

2001-04-01

This paper presents the design of a micro Wankel engine for deep etching micro fabrication. The micro engine design is part of a research program in progress to develop a micro actuator to supply torque for driving micro machines. To begin with, the research work concentrates on the micro Wankel engine powered by liquid CO2. Then, a Wankel internal combustion engines will be investigated. The Wankel engine is a planetary rotation engine. It is selected because of its largely 2D structure which is suitable for lithographic processes. The engine has been simplified and redesigned to suit the fabrication processes. In particular, the fuel inlet has been moved to the top cover of the housing from the side, and the outlet is made as a groove on the housing, so that the both parts can be etched. A synchronization valve is mounted on the engine to control the supply of CO2. One of advantages of the micro engines is their high energy density compared with batteries. A research study has been conducted in comparing energy densities of commonly used fuels. It shows that the energy densities of fuels for combustion engines are 10 - 30 times higher than that of batteries. The deigns of the micro Wankel engines have been tested for verification by finite element analysis, CAD assembly, and construction of a prototype, which proves the design is valid.

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities near KSC, workers begin moving NASA’s MESSENGER spacecraft into the building MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - is being taken into a high bay clean room where employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

NASA Image and Video Library

2004-03-10

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities near KSC, workers begin moving NASA’s MESSENGER spacecraft into the building MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - is being taken into a high bay clean room where employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities near KSC, a lift begins lowering NASA’s MESSENGER spacecraft onto the ground. MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - will be taken into a high bay clean room and employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

NASA Image and Video Library

2004-03-10

KENNEDY SPACE CENTER, FLA. - At the Astrotech Space Operations processing facilities near KSC, a lift begins lowering NASA’s MESSENGER spacecraft onto the ground. MESSENGER - short for MErcury Surface, Space ENvironment, GEochemistry and Ranging - will be taken into a high bay clean room and employees of the Johns Hopkins University Applied Physics Laboratory, builders of the spacecraft, will perform an initial state-of-health check. Then processing for launch can begin, including checkout of the power systems, communications systems and control systems. The thermal blankets will also be attached for flight. MESSENGER will be launched May 11 on a six-year mission aboard a Boeing Delta II rocket. Liftoff is targeted for 2:26 a.m. EDT on Tuesday, May 11.

7 CFR 1291.6 - Completed application.

Code of Federal Regulations, 2014 CFR

2014-01-01

... specialty crops. The State plan shall include the following: (1) Cover page and granting processes. Include... affirmative steps taken to conduct outreach to socially disadvantaged farmers and beginning farmers. Describe... made to either a socially disadvantaged farmer or a beginning farmer. If steps were not taken to...

7 CFR 1291.6 - Completed application.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specialty crops. The State plan shall include the following: (1) Cover page and granting processes. Include... affirmative steps taken to conduct outreach to socially disadvantaged farmers and beginning farmers. Describe... made to either a socially disadvantaged farmer or a beginning farmer. If steps were not taken to...

7 CFR 1291.6 - Completed application.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specialty crops. The State plan shall include the following: (1) Cover page and granting processes. Include... affirmative steps taken to conduct outreach to socially disadvantaged farmers and beginning farmers. Describe... made to either a socially disadvantaged farmer or a beginning farmer. If steps were not taken to...

Challenges Confronting Beginning Researchers in Conducting Literature Reviews

ERIC Educational Resources Information Center

Chen, Der-Thanq; Wang, Yu-Mei; Lee, Wei Ching

2016-01-01

Conducting literature review is a complicated, sometimes confusing and laborious process that beginning educational researchers, especially graduate students, often find challenging. However, in the past these challenges were hardly considered, but in more recent times they have been increasingly considered by various faculties and graduate…

Apollo guidance, navigation and control: Guidance system operations plans for manned LM earth orbital and lunar missions using Program COLOSSUS 3. Section 7: Erasable memory programs

NASA Technical Reports Server (NTRS)

Hamilton, M. H.

1972-01-01

Erasable-memory programs (EMPs) designed for the guidance computers used in the command (CMC) and lunar modules (LGC) are described. CMC programs are designated COLOSSUS 3, and the associated EMPs are identified by a three-digit number beginning with 5. LGC programs are designated LUMINARY 1E, and the associated EMPs are identified, with one exception, by a three-digit number beginning with 1. The exception is EMP 99. The EMPs vary in complexity from a simple flagbit setting to a long and intricate logical structure. They all, however, cause the computer to behave in a way not intended in the original design of the programs; they accomplish this off-nominal behavior by some alteration of erasable memory to interface with existing fixed-memory programs to effect a desired result.

Iteration in Early-Elementary Engineering Design

ERIC Educational Resources Information Center

McFarland Kendall, Amber Leigh

2017-01-01

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect…

Development of numerical processing in children with typical and dyscalculic arithmetic skills—a longitudinal study

PubMed Central

Landerl, Karin

2013-01-01

Numerical processing has been demonstrated to be closely associated with arithmetic skills, however, our knowledge on the development of the relevant cognitive mechanisms is limited. The present longitudinal study investigated the developmental trajectories of numerical processing in 42 children with age-adequate arithmetic development and 41 children with dyscalculia over a 2-year period from beginning of Grade 2, when children were 7; 6 years old, to beginning of Grade 4. A battery of numerical processing tasks (dot enumeration, non-symbolic and symbolic comparison of one- and two-digit numbers, physical comparison, number line estimation) was given five times during the study (beginning and middle of each school year). Efficiency of numerical processing was a very good indicator of development in numerical processing while within-task effects remained largely constant and showed low long-term stability before middle of Grade 3. Children with dyscalculia showed less efficient numerical processing reflected in specifically prolonged response times. Importantly, they showed consistently larger slopes for dot enumeration in the subitizing range, an untypically large compatibility effect when processing two-digit numbers, and they were consistently less accurate in placing numbers on a number line. Thus, we were able to identify parameters that can be used in future research to characterize numerical processing in typical and dyscalculic development. These parameters can also be helpful for identification of children who struggle in their numerical development. PMID:23898310

Architects and Design-Phase Cost Estimates: Design Professionals Should Reconsider the Value of Third-Party Estimates

ERIC Educational Resources Information Center

Coakley, John

2010-01-01

Professional cost estimators are widely used by architects during the design phases of a project to provide preliminary cost estimates. These estimates may begin at the conceptual design phase and are prepared at regular intervals through the construction document phase. Estimating professionals are frequently tasked with "selling" the importance…

Design optimization of aircraft landing gear assembly under dynamic loading

NASA Astrophysics Data System (ADS)

Wong, Jonathan Y. B.

As development cycles and prototyping iterations begin to decrease in the aerospace industry, it is important to develop and improve practical methodologies to meet all design metrics. This research presents an efficient methodology that applies high-fidelity multi-disciplinary design optimization techniques to commercial landing gear assemblies, for weight reduction, cost savings, and structural performance dynamic loading. Specifically, a slave link subassembly was selected as the candidate to explore the feasibility of this methodology. The design optimization process utilized in this research was sectioned into three main stages: setup, optimization, and redesign. The first stage involved the creation and characterization of the models used throughout this research. The slave link assembly was modelled with a simplified landing gear test, replicating the behavior of the physical system. Through extensive review of the literature and collaboration with Safran Landing Systems, dynamic and structural behavior for the system were characterized and defined mathematically. Once defined, the characterized behaviors for the slave link assembly were then used to conduct a Multi-Body Dynamic (MBD) analysis to determine the dynamic and structural response of the system. These responses were then utilized in a topology optimization through the use of the Equivalent Static Load Method (ESLM). The results of the optimization were interpreted and later used to generate improved designs in terms of weight, cost, and structural performance under dynamic loading in stage three. The optimized designs were then validated using the model created for the MBD analysis of the baseline design. The design generation process employed two different approaches for post-processing the topology results produced. The first approach implemented a close replication of the topology results, resulting in a design with an overall peak stress increase of 74%, weight savings of 67%, and no apparent cost savings due to complex features present in the design. The second design approach focused on realizing reciprocating benefits for cost and weight savings. As a result, this design was able to achieve an overall peak stress increase of 6%, weight and cost savings of 36%, and 60%, respectively.

Design and Development of High-Repetition-Rate Satellite Laser Ranging System

NASA Astrophysics Data System (ADS)

Choi, Eun-Jung; Bang, Seong-Cheol; Sung, Ki-Pyoung; Lim, Hyung-Chul; Jung, Chan-Gyu; Kim, In-Yeung; Choi, Jae-Seung

2015-09-01

The Accurate Ranging System for Geodetic Observation ? Mobile (ARGO-M) was successfully developed as the first Korean mobile Satellite Laser Ranging (SLR) system in 2012, and has joined in the International Laser Ranging Service (ILRS) tracking network, DAEdeoK (DAEK) station. The DAEK SLR station was approved as a validated station in April 2014, through the ILRS station ¡°data validation¡± process. The ARGO-M system is designed to enable 2 kHz laser ranging with millimeter-level precision for geodetic, remote sensing, navigation, and experimental satellites equipped with Laser Retroreflector Arrays (LRAs). In this paper, we present the design and development of a next generation high-repetition-rate SLR system for ARGO-M. The laser ranging rate up to 10 kHz is becoming an important issue in the SLR community to improve ranging precision. To implement high-repetition-rate SLR system, the High-repetition-rate SLR operation system (HSLR-10) was designed and developed using ARGO-M Range Gate Generator (A-RGG), so as to enable laser ranging from 50 Hz to 10 kHz. HSLR-10 includes both hardware controlling software and data post-processing software. This paper shows the design and development of key technologies of high-repetition-rate SLR system. The developed system was tested successfully at DAEK station and then moved to Sejong station, a new Korean SLR station, on July 1, 2015. HSLR-10 will begin normal operations at Sejong station in the near future.

Solar Decathlon 2015 - Indigo Pine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blouin, Vincent

The Solar Decathlon competition challenges students across the country to design and build a net-zero, market ready solar powered home. The bi-annual competition consists of ten contests that seek to balance the home on a scale of innovation. The ten contests were selected by to organizers to address all aspects of housing, including architecture, market appeal, engineering, communication, affordability, comfort, appliances, home life, commuting, and energy balance. Along with the criteria associated with the contests, the competition includes several design constraints that mirror those found in practical housing applications: including (but certainly not limited to) lot lines, building height, andmore » ADA accessibility. The Solar Decathlon 2015 was held at the Orange Country Great Park in Irvine, CA. The 2015 competition was Clemson University’s first entry into the Solar Decathlon and was a notable milestone in the continued development of a home, called Indigo Pine. From the beginning, the team reconsidered the notion of sustainability as related to both the design of a home and the competition itself. The designing and building process for the home reflects a process which seamlessly moves between thinking and making to develop a comprehensive design with a method and innovations that challenge the conventions of residential construction. This report is a summary of the activities of the Clemson University team during the two-year duration of the project leading to the participation in the 2015 Solar Decathlon competition in Irvine California.« less

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

PubMed

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

A Community-Based Intervention to Prevent Obesity Beginning at Birth among American Indian Children: Study Design and Rationale for the PTOTS study

PubMed Central

Karanja, Njeri; Aickin, Mikel; Lutz, Tam; Mist, Scott; Jobe, Jared B.; Maupomé, Gerardo; Ritenbaugh, Cheryl

2012-01-01

Eating and physical activity behaviors associated with adult obesity have early antecedents, yet few studies have focused on obesity prevention interventions targeting very young children. Efforts to prevent obesity beginning at birth seem particularly important in populations at risk for early-onset obesity. National estimates indicate that American Indian (AI) children have higher rates of overweight and obesity than children of other races/ethnicities. The Prevention of Toddler Obesity and Teeth Health Study (PTOTS) is a community-partnered randomized controlled trial designed to prevent obesity beginning at birth in AI children. PTOTS was developed to test the effectiveness of a multi-component intervention designed to: promote breastfeeding, reduce sugar-sweetened beverage consumption, appropriately time the introduction of healthy solid foods, and counsel parents to reduce sedentary lifestyles in their children. A birth cohort of 577 children from five AI tribes is randomized by tribe to either the intervention (three tribes) or the comparison condition (two tribes). The strengths and weaknesses of PTOTS include a focus on a critical growth phase, placement in the community, and intervention at many levels, using a variety of approaches. PMID:23001689

A Nuclear Reactor and Chemical Processing Design for Production of Molybdenum-99 with Crystalline Uranyl Nitrate Hexahydrate Fuel

NASA Astrophysics Data System (ADS)

Stange, Gary Michael

Medical radioisotopes are used in tens of millions of procedures every year to detect and image a wide variety of maladies and conditions in the human body. The most widely-used diagnostic radioisotope is technetium-99m, a metastable isomer of technetium-99 that is generated by the radioactive decay of molybdenum-99. For a number of reasons, the supply of molybdenum-99 has become unreliable and the techniques used to produce it have become unattractive. This has spurred the investigation of new technologies that avoid the use of highly enriched uranium to produce molybdenum-99 in the United States, where approximately half of the demand originates. The first goal of this research is to develop a critical nuclear reactor design powered by solid, discrete pins of low enriched uranium. Analyses of single-pin heat transfer and whole-core neutronics are performed to determine the required specifications. Molybdenum-99 is produced directly in the fuel of this reactor and then extracted through a series of chemical processing steps. After this extraction, the fuel is left in an aqueous state. The second goal of this research is to describe a process by which the uranium may be recovered from this spent fuel solution and reconstituted into the original fuel form. Fuel recovery is achieved through a crystallization step that generates solid uranyl nitrate hexahydrate while leaving the majority of fission products and transuranic isotopes in solution. This report provides background information on molybdenum-99 production and crystallization chemistry. The previously unknown thermal conductivity of the fuel material is measured. Following this is a description of the modeling and calculations used to develop a reactor concept. The operational characteristics of the reactor core model are analyzed and reported. Uranyl nitrate crystallization experiments have also been conducted, and the results of this work are presented here. Finally, a process flow scheme for uranium recovery is examined, in part qualitatively and in part quantitatively, based upon the preceding data garnered through literature review, modeling, and experimentation. The sum of this research is meant to allow for a complete understanding of the process flow, from the beginning of one production cycle to the beginning of another.

Thermo-mechanical cyclic testing of carbon-carbon primary structure for an SSTO vehicle

NASA Astrophysics Data System (ADS)

Croop, Harold C.; Leger, Kenneth B.; Lowndes, Holland B.; Hahn, Steven E.; Barthel, Chris A.

1999-01-01

An advanced carbon-carbon structural component is being experimentally evaluated for use as primary load carrying structure for future single-stage-to-orbit (SSTO) vehicles. The component is a wing torque box section featuring an advanced, three-spar design. This design features 3D-woven, angle-interlock skins, 3D integrally woven spar webs and caps, oxidation inhibited matrix, chemical vapor deposited (CVD) oxidation protection coating, and ceramic matrix composite fasteners. The box spar caps are nested into the skins which, when processed together through the carbon-carbon processing cycle, resulted in monolithic box halves. The box half sections were then joined at the spar web intersections using ceramic matrix composite fasteners. This method of fabrication eliminated fasteners through both the upper and lower skins. Development of the carbon-carbon wing box structure was accomplished in a four phase design and fabrication effort, conducted by Boeing, Information, Space and Defense Systems, Seattle, WA, under contract to the Air Force Research Laboratory (AFRL). The box is now set up for testing and will soon begin cyclic loads testing in the AFRL Structural Test Facility at Wright-Patterson Air Force Base (WPAFB), OH. This paper discusses the latest test setup accomplishments and the results of the pre-cyclic loads testing performed to date.

National Combustion Code Validated Against Lean Direct Injection Flow Field Data

NASA Technical Reports Server (NTRS)

Iannetti, Anthony C.

2003-01-01

Most combustion processes have, in some way or another, a recirculating flow field. This recirculation stabilizes the reaction zone, or flame, but an unnecessarily large recirculation zone can result in high nitrogen oxide (NOx) values for combustion systems. The size of this recirculation zone is crucial to the performance of state-of-the-art, low-emissions hardware. If this is a large-scale combustion process, the flow field will probably be turbulent and, therefore, three-dimensional. This research dealt primarily with flow fields resulting from lean direct injection (LDI) concepts, as described in Research & Technology 2001. LDI is a concept that depends heavily on the design of the swirler. The LDI concept has the potential to reduce NOx values from 50 to 70 percent of current values, with good flame stability characteristics. It is cost effective and (hopefully) beneficial to do most of the design work for an LDI swirler using computer-aided design (CAD) and computer-aided engineering (CAE) tools. Computational fluid dynamics (CFD) codes are CAE tools that can calculate three-dimensional flows in complex geometries. However, CFD codes are only beginning to correctly calculate the flow fields for complex devices, and the related combustion models usually remove a large portion of the flow physics.

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint.

PubMed

Blaya, Fernando; Pedro, Pilar San; Silva, Julia López; D'Amato, Roberto; Heras, Enrique Soriano; Juanes, Juan Antonio

2018-02-05

The traditional fabrication process of custom-made splints has hardly undergone any progress since the beginning of its use at the end of the eighteenth century. New manufacturing techniques and the new materials can help to modernize this treatment method of fractures. The use of Additive Manufacturing has been proposed in recent years as an alternative process for the manufacture of splints and there has been an increase in public awareness and exploration. For this reason, in this study a splint model printed in 3D, that replaces the deficiencies of the cast maintaining its virtues, has been proposed. The proposed methodology is based on three-dimensional digitalization techniques and 3D modeling with reverse engineering software. The work integrates different scientific disciplines to achieve its main goal: to improve life quality of the patient. In addition, the splint has been designed based on the principles of sustainable development. The design of splint is made of Polycarbonate by technique of Additive Manufacturing with fused deposition manufacturing, and conceived with organic shapes, customizing openings and closing buttons with rubber. In this preliminary study the final result is a prototype of the 3D printed arm splint in a reduced scale by using PLA as material.

Data path design and image quality aspects of the next generation multifunctional printer

NASA Astrophysics Data System (ADS)

Brassé, M. H. H.; de Smet, S. P. R. C.

2008-01-01

Multifunctional devices (MFDs) are increasingly used as a document hub. The MFD is used as a copier, scanner, printer, and it facilitates digital document distribution and sharing. This imposes new requirements on the design of the data path and its image processing. Various design aspects need to be taken into account, including system performance, features, image quality, and cost price. A good balance is required in order to develop a competitive MFD. A modular datapath architecture is presented that supports all the envisaged use cases. Besides copying, colour scanning is becoming an important use case of a modern MFD. The copy-path use case is described and it is shown how colour scanning can also be supported with a minimal adaptation to the architecture. The key idea is to convert the scanner data to an opponent colour space representation at the beginning of the image processing pipeline. The sub-sampling of chromatic information allows for the saving of scarce hardware resources without significant perceptual loss of quality. In particular, we have shown that functional FPGA modules from the copy application can also be used for the scan-to-file application. This makes the presented approach very cost-effective while complying with market conform image quality standards.

Performance enhancement of iron-chromium redox flow batteries by employing interdigitated flow fields

NASA Astrophysics Data System (ADS)

Zeng, Y. K.; Zhou, X. L.; Zeng, L.; Yan, X. H.; Zhao, T. S.

2016-09-01

The catalyst for the negative electrode of iron-chromium redox flow batteries (ICRFBs) is commonly prepared by adding a small amount of Bi3+ ions in the electrolyte and synchronously electrodepositing metallic particles onto the electrode surface at the beginning of charge process. Achieving a uniform catalyst distribution in the porous electrode, which is closely related to the flow field design, is critically important to improve the ICRFB performance. In this work, the effects of flow field designs on catalyst electrodeposition and battery performance are investigated. It is found that compared to the serpentine flow field (SFF) design, the interdigitated flow field (IFF) forces the electrolyte through the porous electrode between the neighboring channels and enhances species transport during the processes of both the catalyst electrodeposition and iron/chromium redox reactions, thus enabling a more uniform catalyst distribution and higher mass transport limitation. It is further demonstrated that the energy efficiency of the ICRFB with the IFF reaches 80.7% at a high current density (320 mA cm-2), which is 8.2% higher than that of the ICRFB with the SFF. With such a high performance and intrinsically low-cost active materials, the ICRFB with the IFF offers a great promise for large-scale energy storage.

Enhancing the Practicum Experience for Pre-service Chemistry Teachers Through Collaborative CoRe Design with Mentor Teachers

NASA Astrophysics Data System (ADS)

Hume, Anne; Berry, Amanda

2013-10-01

This paper reports findings from an ongoing study exploring how the Content Representation (CoRe) design can be used as a tool to help chemistry student teachers begin acquiring the professional knowledge required to become expert chemistry teachers. Phase 2 of the study, reported in this paper, investigated how collaboration with school-based mentors (associate teachers) on teaching practice (practicum) might impact on this process and student teachers' development of their pedagogical content knowledge (PCK). The collaboration involved identifying and discussing pedagogical issues related to a practicum-teaching topic using a student teacher's draft CoRe as a starting point and ongoing focus for the professional dialogue. Practicum offered an opportunity for aspects of student teachers' PCK, as embodied in their draft CoRes, to be explored and expanded upon in classroom programmes with the support and input of associate teachers. The findings were influenced by different contextual factors; however, the student teachers found their CoRes to be very useful frameworks for engaging in focussed professional dialogue with their teaching mentors. They valued the expertise, currency of knowledge and mentoring of their associates and reported positively about the contribution this support made to their PCK development via the CoRe design process and the transformation of the CoRe into classroom teaching.

Management strategies to effect change in intensive care units: lessons from the world of business. Part II. Quality-improvement strategies.

PubMed

Gershengorn, Hayley B; Kocher, Robert; Factor, Phillip

2014-03-01

The success of quality-improvement projects relies heavily on both project design and the metrics chosen to assess change. In Part II of this three-part American Thoracic Society Seminars series, we begin by describing methods for determining which data to collect, tools for data presentation, and strategies for data dissemination. As Avedis Donabedian detailed a half century ago, defining metrics in healthcare can be challenging; algorithmic determination of the best type of metric (outcome, process, or structure) can help intensive care unit (ICU) managers begin this process. Choosing appropriate graphical data displays (e.g., run charts) can prompt discussions about and promote quality improvement. Similarly, dashboards/scorecards are useful in presenting performance improvement data either publicly or privately in a visually appealing manner. To have compelling data to show, ICU managers must plan quality-improvement projects well. The second portion of this review details four quality-improvement tools-checklists, Six Sigma methodology, lean thinking, and Kaizen. Checklists have become commonplace in many ICUs to improve care quality; thinking about how to maximize their effectiveness is now of prime importance. Six Sigma methodology, lean thinking, and Kaizen are techniques that use multidisciplinary teams to organize thinking about process improvement, formalize change strategies, actualize initiatives, and measure progress. None originated within healthcare, but each has been used in the hospital environment with success. To conclude this part of the series, we demonstrate how to use these tools through an example of improving the timely administration of antibiotics to patients with sepsis.

A Formative Study Investigating the Acquisition of Early Reading Skills among High School English Language Learners Beginning to Read English

ERIC Educational Resources Information Center

Bell, Athene Cooper

2012-01-01

A formative design experiment methodology was employed to investigate the acquisition of early reading skills for high school English language learners (ELLs) beginning to read English. A fundamental challenge facing high school ELLs entering schools in the United States for the first time is learning how to read. While there is considerable…

Understanding the Role Curriculum and Supports for Its Implementation Play in How Test-Only Beginning Special Education Teachers Learn about and Enact Reading Instruction

ERIC Educational Resources Information Center

Kamman, Margaret Lane

2009-01-01

Working under an activity theory framework, the present study was designed to determine how the activity settings, individual and contextual, contributed to the instructional practices and understandings of test-only beginning special education teachers. Specifically, the focus of this study was to examine how teachers with no formal teacher…

Multi-angle Imaging Spectro Radiometer (MISR) Design Issues Influened by Performance Requirements

NASA Technical Reports Server (NTRS)

Bruegge, C. J.; White, M. L.; Chrien, N. C. L.; Villegas, E. B.; Raouf, N.

1993-01-01

The design of an Earth Remote Sensing Sensor, such as the Multi-angle Imaging SpectroRadiometer (MISR), begins with a set of science requirements and is quickly followed by a set of instrument specifications.

Design Pedagogy for an Unknown Future: A View from the Expanding Field of Design Scholarship and Professional Practice

ERIC Educational Resources Information Center

Wilson, Stephanie Elizabeth; Zamberlan, Lisa

2017-01-01

This article draws on current research investigating the notion of design for an unknown future. It reflects on recent thinking about the role of creativity in design practice and discusses implications for the development and assessment of creativity in the design studio. It begins with a review of literature on the issues and challenges…

Planar LTCC transformers for high voltage flyback converters: Part II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George

This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material propertiesmore » and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.« less

An experimental study of stratospheric gravity waves - Design and preliminary results

NASA Astrophysics Data System (ADS)

Talagrand, O.; Ovarlez, H.

1984-02-01

The design of balloon-borne experimental apparatus for long-term gravitational-wave measurements in the stratosphere is reported, and preliminary results of a first test flight are presented. Two gondolas (each containing a pressure sensor; a temperature sensor; horizontal and vertical sonic anemometers; a fin equipped with crossed magnetometers; and data-processing, data-transmission, and control electronics) are suspended 100 and 300 m below a solar/terrestrial-IR-absorption-heated hot-air balloon drifting between altitudes 22 km (night) and 28 km (day); power is supplied by NiCd batteries recharged by solar cells. The path of the first flight, a circumnavigation beginning in Pretoria, South Africa and crossing South America and northern Australia, from December 11, 1982, to February 2, 1983 (when transmission ceased over southern Africa) is shown on a map, and sample data for a 36-h period are summarized in a graph.

Collaborative Modular Pumped Hydro Energy Storage Design Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bibeault, Mark Leonide; Roybal, Adam; Bailey, Jr., Richard J.

In May of 2017, Los Alamos National Laboratory (LANL) through the Applied Engineering Technology Division, Jemez Mountain Electric Cooperative Inc. (JMEC), and Northern New Mexico College (NNMC) agreed to enter into a small, joint, non-binding Modular Pumped Hydro (MPH) design study related to grid level energy storage to begin a process of collaboration. Los Alamos National Laboratory's mission is to solve national security challenges through scientific excellence. The mission of Northern New Mexico College is to ensure student success by providing access to affordable, community-based learning opportunities that meet the educational, cultural, and economic needs of the region. Jemez Mountainmore » Electric Cooperative Inc. is the largest electric co-op in the State of New Mexico providing affordable and reliable electricity to customers in the five counties of Rio Arriba, Santa Fe, San Juan, McKinley and Sandoval.« less

Manufacturing plastic injection optical molds

NASA Astrophysics Data System (ADS)

Bourque, David

2008-08-01

ABCO Tool & Die, Inc. is a mold manufacturer specializing in the manufacturing of plastic injection molds for molded optical parts. The purpose of this presentation is to explain the concepts and procedures required to build a mold that produces precision optical parts. Optical molds can produce a variety of molded parts ranging from safety eyewear to sophisticated military lens parts, which must meet precise optical specifications. The manufacturing of these molds begins with the design engineering of precision optical components. The mold design and the related optical inserts are determined based upon the specific optical criteria and optical surface geometry. The mold manufacturing techniques will be based upon the optical surface geometry requirements and specific details. Manufacturing processes used will be specific to prescribed geometrical surface requirements of the molded part. The combined efforts result in a robust optical mold which can produce molded parts that meet the most precise optical specifications.

A web-based 3D visualisation and assessment system for urban precinct scenario modelling

NASA Astrophysics Data System (ADS)

Trubka, Roman; Glackin, Stephen; Lade, Oliver; Pettit, Chris

2016-07-01

Recent years have seen an increasing number of spatial tools and technologies for enabling better decision-making in the urban environment. They have largely arisen because of the need for cities to be more efficiently planned to accommodate growing populations while mitigating urban sprawl, and also because of innovations in rendering data in 3D being well suited for visualising the urban built environment. In this paper we review a number of systems that are better known and more commonly used in the field of urban planning. We then introduce Envision Scenario Planner (ESP), a web-based 3D precinct geodesign, visualisation and assessment tool, developed using Agile and Co-design methods. We provide a comprehensive account of the tool, beginning with a discussion of its design and development process and concluding with an example use case and a discussion of the lessons learned in its development.

A Micromechanics-Based Method for Multiscale Fatigue Prediction

NASA Astrophysics Data System (ADS)

Moore, John Allan

An estimated 80% of all structural failures are due to mechanical fatigue, often resulting in catastrophic, dangerous and costly failure events. However, an accurate model to predict fatigue remains an elusive goal. One of the major challenges is that fatigue is intrinsically a multiscale process, which is dependent on a structure's geometric design as well as its material's microscale morphology. The following work begins with a microscale study of fatigue nucleation around non- metallic inclusions. Based on this analysis, a novel multiscale method for fatigue predictions is developed. This method simulates macroscale geometries explicitly while concurrently calculating the simplified response of microscale inclusions. Thus, providing adequate detail on multiple scales for accurate fatigue life predictions. The methods herein provide insight into the multiscale nature of fatigue, while also developing a tool to aid in geometric design and material optimization for fatigue critical devices such as biomedical stents and artificial heart valves.

Design, Development, And Testing of Umbilical System Mechanisms for the X-33 Advanced Technology Demonstrator

NASA Technical Reports Server (NTRS)

Littlefield, Alan C.; Melton, Gregory S.

2000-01-01

The X-33 Advanced Technology Demonstrator is an un-piloted, vertical take-off, horizontal landing spacecraft. The purpose of the X-33 program is to demonstrate technologies that will dramatically lower the cost of access to space. The rocket-powered X-33 will reach an altitude of up to 100 km and speeds between Mach 13 and 15. Fifteen flight tests are planned, beginning in 2000. Some of the key technologies demonstrated will be the linear aerospike engine, improved thermal protection systems, composite fuel tanks and reduced operational timelines. The X-33 vehicle umbilical connections provide monitoring, power, cooling, purge, and fueling capability during horizontal processing and vertical launch operations. Two "rise-off" umbilicals for the X-33 have been developed, tested, and installed. The X-33 umbilical systems mechanisms incorporate several unique design features to simplify horizontal operations and provide reliable disconnect during launch.

Design, Development,and Testing of Umbillical System Mechanisms for the X-33 Advanced Technology Demonstrator

NASA Technical Reports Server (NTRS)

Littlefield, Alan C.; Melton, Gregory S.

1999-01-01

The X-33 Advanced Technology Demonstrator is an un-piloted, vertical take-off, horizontal landing spacecraft. The purpose of the X-33 program is to demonstrate technologies that will dramatically lower the cost of access to space. The rocket-powered X-33 will reach an altitude of up to 100 km and speeds between Mach 13 and 15. Fifteen flight tests are planned, beginning in 2000. Some of the key technologies demonstrated will be the linear aerospike engine, improved thermal protection systems, composite fuel tanks and reduced operational timelines. The X-33 vehicle umbilical connections provide monitoring, power, cooling, purge, and fueling capability during horizontal processing and vertical launch operations. Two "rise-ofF' umbilicals for the X-33 have been developed, tested, and installed. The X-33 umbilical systems mechanisms incorporate several unique design features to simplify horizontal operations and provide reliable disconnect during launch.

Design theory, modelling and the application for the Internet of Things service

NASA Astrophysics Data System (ADS)

Shang, Xiaopu; Zhang, Runtong; Zhu, Xiaomin; Zhou, Quan

2016-03-01

The Internet of Things (IoT) makes it possible for us to sense the physical world and locate objects in it using the enabling technologies associated with IoT. Compared with traditional information systems, IoT enabling technologies can help acquire real-time data necessary for managing enterprise business process. An IoT system should have an ability beyond integrating enabling technologies and traditional information systems that are only used to access environmental data. This paper begins with a literature review of IoT-related issues and a discussion of the difference between traditional information service and IoT service. Three principles for IoT service design from the perceptive of service classification, coordination and compatibility are proposed. The paper also proposes a utility model for resource allocation in order to improve IoT service performance, and an application involving a cold chain visibility platform is given to illustrate our research.

The X-windows interactive navigation data editor

NASA Technical Reports Server (NTRS)

Rinker, G. C.

1992-01-01

A new computer program called the X-Windows Interactive Data Editor (XIDE) was developed and demonstrated as a prototype application for editing radio metric data in the orbit-determination process. The program runs on a variety of workstations and employs pull-down menus and graphical displays, which allow users to easily inspect and edit radio metric data in the orbit data files received from the Deep Space Network (DSN). The XIDE program is based on the Open Software Foundation OSF/Motif Graphical User Interface (GUI) and has proven to be an efficient tool for editing radio metric data in the navigation operations environment. It was adopted by the Magellan Navigation Team as their primary data-editing tool. Because the software was designed from the beginning to be portable, the prototype was successfully moved to new workstation environments. It was also itegrated into the design of the next-generation software tool for DSN multimission navigation interactive launch support.

Application of quality by design for 3D printed bone prostheses and scaffolds

PubMed Central

Martinez-Marquez, Daniel; Mirnajafizadeh, Ali; Carty, Christopher P.

2018-01-01

3D printing is an emergent manufacturing technology recently being applied in the medical field for the development of custom bone prostheses and scaffolds. However, successful industry transformation to this new design and manufacturing approach requires technology integration, concurrent multi-disciplinary collaboration, and a robust quality management framework. This latter change enabler is the focus of this study. While a number of comprehensive quality frameworks have been developed in recent decades to ensure that the manufacturing of medical devices produces reliable products, they are centred on the traditional context of standardised manufacturing techniques. The advent of 3D printing technologies and the prospects for mass customisation provides significant market opportunities, but also presents a serious challenge to regulatory bodies tasked with managing and assuring product quality and safety. Before 3D printing bone prostheses and scaffolds can gain traction, industry stakeholders, such as regulators, clients, medical practitioners, insurers, lawyers, and manufacturers, would all require a high degree of confidence that customised manufacturing can achieve the same quality outcomes as standardised manufacturing. A Quality by Design (QbD) approach to custom 3D printed prostheses can help to ensure that products are designed and manufactured correctly from the beginning without errors. This paper reports on the adaptation of the QbD approach for the development process of 3D printed custom bone prosthesis and scaffolds. This was achieved through the identification of the Critical Quality Attributes of such products, and an extensive review of different design and fabrication methods for 3D printed bone prostheses. Research outcomes include the development of a comprehensive design and fabrication process flow diagram, and categorised risks associated with the design and fabrication processes of such products. An extensive systematic literature review and post-hoc evaluation survey with experts was completed to evaluate the likely effectiveness of the herein suggested QbD framework. PMID:29649231

SynGenics Optimization System (SynOptSys)

NASA Technical Reports Server (NTRS)

Ventresca, Carol; McMilan, Michelle L.; Globus, Stephanie

2013-01-01

The SynGenics Optimization System (SynOptSys) software application optimizes a product with respect to multiple, competing criteria using statistical Design of Experiments, Response-Surface Methodology, and the Desirability Optimization Methodology. The user is not required to be skilled in the underlying math; thus, SynOptSys can help designers and product developers overcome the barriers that prevent them from using powerful techniques to develop better pro ducts in a less costly manner. SynOpt-Sys is applicable to the design of any product or process with multiple criteria to meet, and at least two factors that influence achievement of those criteria. The user begins with a selected solution principle or system concept and a set of criteria that needs to be satisfied. The criteria may be expressed in terms of documented desirements or defined responses that the future system needs to achieve. Documented desirements can be imported into SynOptSys or created and documented directly within SynOptSys. Subsequent steps include identifying factors, specifying model order for each response, designing the experiment, running the experiment and gathering the data, analyzing the results, and determining the specifications for the optimized system. The user may also enter textual information as the project progresses. Data is easily edited within SynOptSys, and the software design enables full traceability within any step in the process, and facilitates reporting as needed. SynOptSys is unique in the way responses are defined and the nuances of the goodness associated with changes in response values for each of the responses of interest. The Desirability Optimization Methodology provides the basis of this novel feature. Moreover, this is a complete, guided design and optimization process tool with embedded math that can remain invisible to the user. It is not a standalone statistical program; it is a design and optimization system.

Application of quality by design for 3D printed bone prostheses and scaffolds.

PubMed

Martinez-Marquez, Daniel; Mirnajafizadeh, Ali; Carty, Christopher P; Stewart, Rodney A

2018-01-01

3D printing is an emergent manufacturing technology recently being applied in the medical field for the development of custom bone prostheses and scaffolds. However, successful industry transformation to this new design and manufacturing approach requires technology integration, concurrent multi-disciplinary collaboration, and a robust quality management framework. This latter change enabler is the focus of this study. While a number of comprehensive quality frameworks have been developed in recent decades to ensure that the manufacturing of medical devices produces reliable products, they are centred on the traditional context of standardised manufacturing techniques. The advent of 3D printing technologies and the prospects for mass customisation provides significant market opportunities, but also presents a serious challenge to regulatory bodies tasked with managing and assuring product quality and safety. Before 3D printing bone prostheses and scaffolds can gain traction, industry stakeholders, such as regulators, clients, medical practitioners, insurers, lawyers, and manufacturers, would all require a high degree of confidence that customised manufacturing can achieve the same quality outcomes as standardised manufacturing. A Quality by Design (QbD) approach to custom 3D printed prostheses can help to ensure that products are designed and manufactured correctly from the beginning without errors. This paper reports on the adaptation of the QbD approach for the development process of 3D printed custom bone prosthesis and scaffolds. This was achieved through the identification of the Critical Quality Attributes of such products, and an extensive review of different design and fabrication methods for 3D printed bone prostheses. Research outcomes include the development of a comprehensive design and fabrication process flow diagram, and categorised risks associated with the design and fabrication processes of such products. An extensive systematic literature review and post-hoc evaluation survey with experts was completed to evaluate the likely effectiveness of the herein suggested QbD framework.

Model for Simulating a Spiral Software-Development Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Curley, Charles; Nayak, Umanath

2010-01-01

A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code), productivity (number of lines of code per hour), and number of defects per source line of code. The user provides the number of resources, the overall percent of effort that should be allocated to each process step, and the number of desired staff members for each step. The output of PATT includes the size of the product, a measure of effort, a measure of rework effort, the duration of the entire process, and the numbers of injected, detected, and corrected defects as well as a number of other interesting features. In the development of the present model, steps were added to the IEEE 12207 waterfall process, and this model and its implementing software were made to run repeatedly through the sequence of steps, each repetition representing an iteration in a spiral process. Because the IEEE 12207 model is founded on a waterfall paradigm, it enables direct comparison of spiral and waterfall processes. The model can be used throughout a software-development project to analyze the project as more information becomes available. For instance, data from early iterations can be used as inputs to the model, and the model can be used to estimate the time and cost of carrying the project to completion.

Tender Beginnings program: an educational continuum for the maternity patient.

PubMed

Brown, Susan E H

2006-01-01

The Tender Beginnings program demonstrates a comprehensive educational plan for maternity patients that can be extended throughout pregnancy, the birth process, and into the postpartum period. In today's healthcare environment, where the maternity patient continues to experience a shortened stay structure, the hurried learning process that is absorbed over a 48-hour stay is often ineffectual. This program provides a strategy and framework for effective teaching that can be successfully implemented all through the peripartum period. Budgetary constraints have given way to an innovative approach and opportunity for the healthcare specialist to explore an entrepreneurial relationship within the structure of the program. The Tender Beginnings program has proven to be a true integration of community educational outreach, nurse entrepreneurship, hospital-based education, and postpartum/neonatal follow-up.

Atherosclerotic Cardiovascular Disease Beginning in Childhood

PubMed Central

2010-01-01

Although the clinical manifestations of cardiovascular disease (CVD), such as myocardial infarction, stroke, and peripheral vascular disease, appear from middle age, the process of atherosclerosis can begin early in childhood. The early stage and progression of atherosclerosis in youth are influenced by risk factors that include obesity, hypertension, dyslipidemia, and smoking, and by the presence of specific diseases, such as diabetes mellitus and Kawasaki disease (KD). The existing evidence indicates that primary prevention of atherosclerotic disease should begin in childhood. Identification of children at risk for atherosclerosis may allow early intervention to decrease the atherosclerotic process, thereby preventing or delaying CVD. This review will describe the origin and progression of atherosclerosis in childhood, and the identification and management of known risk factors for atherosclerotic CVD in children and young adults. PMID:20111646

NASA Planning for Orion Multi-Purpose Crew Vehicle Ground Operations

NASA Technical Reports Server (NTRS)

Letchworth, Gary; Schlierf, Roland

2011-01-01

The NASA Orion Ground Processing Team was originally formed by the Kennedy Space Center (KSC) Constellation (Cx) Project Office's Orion Division to define, refine and mature pre-launch and post-landing ground operations for the Orion human spacecraft. The multidisciplined KSC Orion team consisted of KSC civil servant, SAIC, Productivity Apex, Inc. and Boeing-CAPPS engineers, project managers and safety engineers, as well as engineers from Constellation's Orion Project and Lockheed Martin Orion Prime contractor. The team evaluated the Orion design configurations as the spacecraft concept matured between Systems Design Review (SDR), Systems Requirement Review (SRR) and Preliminary Design Review (PDR). The team functionally decomposed prelaunch and post-landing steps at three levels' of detail, or tiers, beginning with functional flow block diagrams (FFBDs). The third tier FFBDs were used to build logic networks and nominal timelines. Orion ground support equipment (GSE) was identified and mapped to each step. This information was subsequently used in developing lower level operations steps in a Ground Operations Planning Document PDR product. Subject matter experts for each spacecraft and GSE subsystem were used to define 5th - 95th percentile processing times for each FFBD step, using the Delphi Method. Discrete event simulations used this information and the logic network to provide processing timeline confidence intervals for launch rate assessments. The team also used the capabilities of the KSC Visualization Lab, the FFBDs and knowledge of the spacecraft, GSE and facilities to build visualizations of Orion pre-launch and postlanding processing at KSC. Visualizations were a powerful tool for communicating planned operations within the KSC community (i.e., Ground Systems design team), and externally to the Orion Project, Lockheed Martin spacecraft designers and other Constellation Program stakeholders during the SRR to PDR timeframe. Other operations planning tools included Kaizen/Lean events, mockups and human factors analysis. The majority of products developed by this team are applicable as KSC prepares 21st Century Ground Systems for the Orion Multi-Purpose Crew Vehicle and Space Launch System.

Teacher Induction: A New Beginning. Papers from the National Commission on the Induction Process.

ERIC Educational Resources Information Center

Brooks, Douglas M., Ed.

The following papers are included in this monograph that provides a synthesis on beginning teacher induction: (1) "Teacher Induction" (Leslie Huling-Austin); (2) "Local Induction Programs" (Ralph Kester and Mary Marockie); (3) "Statewide Teacher Induction Programs" (Parmalee Hawk and Shirley Robards); (4) "The…

The Value of Early Literacy and Parental Involvement.

ERIC Educational Resources Information Center

Ryan, Sheri Ann

Because early literacy development occurs through social processes, parents need to be involved in the beginning stages of their children's reading. This thesis details the need for early literacy experiences and provides evidence that reading success begins at home. The thesis distinguishes illiteracy and aliteracy, defines literacy, discusses…

A Guide to the Multifactored Evaluation (MFE).

ERIC Educational Resources Information Center

Ohio Coalition for the Education of Children with Disabilities, Marion.

This guide provides Ohio parents of children with disabilities with information on multifactored evaluations. It begins by discussing the Intervention Assistance Team and what occurs at the assistance team meeting. It also explains that to begin the multifactored evaluation process, the parent must complete a "Request for Parent Consent for…

Research design.

PubMed

Toledo-Pereyra, Luis H

2012-10-01

The development of a good research design permits us to obtain the best research data possible. From the experimental question to the research hypothesis and data collection variables, we can begin to consider the optimal research design. Details pertaining to the selection of the research design are considered within and very much in relation with the knowledge of the researcher and the support of his research group.

Designing and Assessing Courses and Curricula: A Practical Guide. Second Edition. The Jossey-Bass Higher and Adult Education Series.

ERIC Educational Resources Information Center

Diamond, Robert M.

This book is intended to help college faculty effectively design and evaluate courses and curricula. The 16 chapters address the following topics: a learning-centered approach to course and curriculum design; a systematic design model (showing benefits); the decision to begin a curriculum project; getting started; linking goals, courses, and…

Gestalt-A Learning Theory for Graphic Design Education

ERIC Educational Resources Information Center

Jackson, Ian

2008-01-01

This article will begin by seeking to define the notion of learning "by, through" and "from" experience. A linkage will then be established between these notions of experiences and gestalt theory. This will be explored within a subject specific context of graphic design. Links will be highlighted between the inherent nature of graphic design and…

40 CFR 80.1645 - Sample retention requirements for producers and importers of denaturant designated as suitable...

Code of Federal Regulations, 2014 CFR

2014-07-01

... producers and importers of denaturant designated as suitable for the manufacture of denatured fuel ethanol... suitable for the manufacture of denatured fuel ethanol meeting federal quality requirements. Beginning January 1, 2017, or on the first day that any producer or importer of ethanol denaturant designates a...

Universal Design for the Digital Environment: Transforming the Institution

ERIC Educational Resources Information Center

Rowland, Cyndi; Mariger, Heather; Siegel, Peter M.; Whiting, Jonathan

2010-01-01

A revolution is about to transform higher education. To participate in this revolution, those in higher education need to explore a critical concept: "universal design." Universal design was originally aimed at innovations in architecture, community spaces, and products, but today it is about creating services and products, from the beginning, in…

Informal Learning in Professional and Personal Life: Implications for Instructional Design and Performance Improvement

ERIC Educational Resources Information Center

Klein, James D.; Moore, Alison L.

2016-01-01

This article focuses on informal learning and its implications for instructional design and performance improvement. The authors begin by sharing a story of how a novice instructional designer employs informal learning strategies in her professional and personal life. Next, they offer a definition of informal learning that encompasses both…

47 CFR 64.1506 - Number designation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Number designation. 64.1506 Section 64.1506... Number designation. Any interstate service described in § 64.1501(a)(1)-(2), and not subject to the exclusions contained in § 64.1501(a)(4), shall be offered only through telephone numbers beginning with a 900...

47 CFR 64.1506 - Number designation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Number designation. 64.1506 Section 64.1506... Number designation. Any interstate service described in § 64.1501(a)(1)-(2), and not subject to the exclusions contained in § 64.1501(a)(4), shall be offered only through telephone numbers beginning with a 900...

47 CFR 64.1506 - Number designation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Number designation. 64.1506 Section 64.1506... Number designation. Any interstate service described in § 64.1501(a)(1)-(2), and not subject to the exclusions contained in § 64.1501(a)(4), shall be offered only through telephone numbers beginning with a 900...

47 CFR 64.1506 - Number designation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Number designation. 64.1506 Section 64.1506... Number designation. Any interstate service described in § 64.1501(a)(1)-(2), and not subject to the exclusions contained in § 64.1501(a)(4), shall be offered only through telephone numbers beginning with a 900...

Applying Instructional Design Theories to Bioinformatics Education in Microarray Analysis and Primer Design Workshops

ERIC Educational Resources Information Center

Shachak, Aviv; Ophir, Ron; Rubin, Eitan

2005-01-01

The need to support bioinformatics training has been widely recognized by scientists, industry, and government institutions. However, the discussion of instructional methods for teaching bioinformatics is only beginning. Here we report on a systematic attempt to design two bioinformatics workshops for graduate biology students on the basis of…

The art of co-production of knowledge in environmental sciences and management: lessons from international practice

NASA Astrophysics Data System (ADS)

Djenontin, Ida Nadia S.; Meadow, Alison M.

2018-06-01

This review paper addresses the challenging question of "how to" design and implement co-production of knowledge in climate science and other environmental and agricultural sciences. Based on a grounded theory review of nine (9) published case studies of transdisciplinary and collaborative research projects, the paper offers a set of common themes regarding specific components and processes for the design, implementation, and achievement of co-production of knowledge work, which represent the "Modus Operandi" of knowledge co-production. The analysis focuses on practical methodological guidance based on lessons from how different research teams have approached the challenges of complex collaborative research. We begin by identifying broad factors or actions that inhibit or facilitate the process, then highlight specific practices associated with co-production of knowledge and necessary competencies for undertaking co-production. We provide insights on issues such as the integration of social and professional cultures, gender and social equity, and power dynamics, and illustrate the different ways in which researchers have addressed these issues. By exploring the specific practices involved in knowledge co-production, this paper provides guidance to researchers on how to navigate different possibilities of the process of conducting transdisciplinary and co-production of knowledge research projects that best fit their research context, stakeholder needs, and research team capacities.

The art of co-production of knowledge in environmental sciences and management: lessons from international practice.

PubMed

Djenontin, Ida Nadia S; Meadow, Alison M

2018-06-01

This review paper addresses the challenging question of "how to" design and implement co-production of knowledge in climate science and other environmental and agricultural sciences. Based on a grounded theory review of nine (9) published case studies of transdisciplinary and collaborative research projects, the paper offers a set of common themes regarding specific components and processes for the design, implementation, and achievement of co-production of knowledge work, which represent the "Modus Operandi" of knowledge co-production. The analysis focuses on practical methodological guidance based on lessons from how different research teams have approached the challenges of complex collaborative research. We begin by identifying broad factors or actions that inhibit or facilitate the process, then highlight specific practices associated with co-production of knowledge and necessary competencies for undertaking co-production. We provide insights on issues such as the integration of social and professional cultures, gender and social equity, and power dynamics, and illustrate the different ways in which researchers have addressed these issues. By exploring the specific practices involved in knowledge co-production, this paper provides guidance to researchers on how to navigate different possibilities of the process of conducting transdisciplinary and co-production of knowledge research projects that best fit their research context, stakeholder needs, and research team capacities.

Opening the black box: a study of the process of NICE guidelines implementation.

PubMed

Spyridonidis, Dimitrios; Calnan, Michael

2011-10-01

This study informs 'evidence-based' implementation by using an innovative methodology to provide further understanding of the implementation process in the English NHS using two distinctly different NICE clinical guidelines as exemplars. The implementation process was tracked retrospectively and prospectively using a comparative case-study and longitudinal design. 74 unstructured interviews were carried out with 48 key informants (managers and clinicians) between 2007 and 2009. This study has shown that the NICE guidelines implementation process has both planned and emergent components, which was well illustrated by the use of the prospective longitudinal design in this study. The implementation process might be characterised as strategic and planned to begin with but became uncontrolled and subject to negotiation as it moved from the planning phase to adoption in everyday practice. The variations in the implementation process could be best accounted for in terms of differences in the structure and nature of the local organisational context. The latter pointed to the importance of managers as well as clinicians in decision-making about implementation. While national priorities determine the context for implementation the shape of the process is influenced by the interactions between doctors and managers, which influence the way they respond to external policy initiatives such as NICE guidelines. NICE and other national health policy-makers need to recognise that the introduction of planned change 'initiatives' in clinical practice are subject to social and political influences at the micro level as well as the macro level. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Systemic approaches to biodegradation.

PubMed

Trigo, Almudena; Valencia, Alfonso; Cases, Ildefonso

2009-01-01

Biodegradation, the ability of microorganisms to remove complex chemicals from the environment, is a multifaceted process in which many biotic and abiotic factors are implicated. The recent accumulation of knowledge about the biochemistry and genetics of the biodegradation process, and its categorization and formalization in structured databases, has recently opened the door to systems biology approaches, where the interactions of the involved parts are the main subject of study, and the system is analysed as a whole. The global analysis of the biodegradation metabolic network is beginning to produce knowledge about its structure, behaviour and evolution, such as its free-scale structure or its intrinsic robustness. Moreover, these approaches are also developing into useful tools such as predictors for compounds' degradability or the assisted design of artificial pathways. However, it is the environmental application of high-throughput technologies from the genomics, metagenomics, proteomics and metabolomics that harbours the most promising opportunities to understand the biodegradation process, and at the same time poses tremendous challenges from the data management and data mining point of view.