Allergen Challenge Chamber: an innovative solution in allergic rhinitis diagnosis.

PubMed

Krzych-Fałta, Edyta; Sowa, Jerzy; Wojas, Oksana; Piekarska, Barbara; Sybilski, Adam; Samoliński, Bolesław

2015-12-01

The Allergen Challenge Chamber (ACC) is definitely a serious challenge on the one hand and an innovative solution in allergic rhinitis diagnosis on the other. The gradual validation of the chamber (according to the test protocol) will allow for standardisation, which is a process undertaken by centres worldwide. The process of designing a consistent system that allows for creating conditions as those in the case of natural inhalation took into account all the aspects (technical specification) necessary to ensure appropriate inhalation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christon, Mark A.; Bakosi, Jozsef; Francois, Marianne M.

This talk presents an overview of the multiphase flow efforts with Hydra-TH. The presentation begins with a definition of the requirements and design principles for multiphase flow relevant to CASL-centric problems. A brief survey of existing codes and their solution algorithms is presented before turning the model formulation selected for Hydra-TH. The issues of hyperbolicity and wellposedness are outlined, and a three candidate solution algorithms are discussed. The development status of Hydra-TH for multiphase flow is then presented with a brief summary and discussion of future directions for this work.

Design of Chemistry Teacher Education Course on Nature of Science

NASA Astrophysics Data System (ADS)

Vesterinen, Veli-Matti; Aksela, Maija

2013-09-01

To enhance students' understanding of nature of science (NOS), teachers need adequate pedagogical content knowledge related to NOS. The educational design research study presented here describes the design and development of a pre-service chemistry teacher education course on NOS instruction. The study documents two iterative cycles of problem analysis, design, implementation, and evaluation. The main aims of the study were (1) to create an in-depth and detailed description of the process used in the development of the course and the design solutions produced, and (2) to evaluate how the design solutions affected participants' commitment to teach NOS. Based on the problem analysis based on challenges recognized from the previous research, three design solutions were produced: (1) definition of central dimensions of domain-specific NOS for chemistry education, (2) teaching cycle for explicit and structured opportunities for reflection and discussion, and (3) design assignments to translate NOS understanding into classroom practice. The major data-sources used in the evaluation of the design solutions were the four in-depth interviews conducted after the course. Based on the evaluation, the design solutions supported internalizing understanding of NOS and transforming the understanding to instruction. Supporting the implementation of new innovative teaching practices such as NOS instruction in pre-service teacher education is a challenge. However, the success of the participants in implementing NOS instruction demonstrates, that a pre-service teacher education course can be successful in producing early adopters of NOS instruction and thus might be one of the first steps in injecting NOS instruction into the curriculum.

Stabilisation of time-varying linear systems via Lyapunov differential equations

NASA Astrophysics Data System (ADS)

Zhou, Bin; Cai, Guang-Bin; Duan, Guang-Ren

2013-02-01

This article studies stabilisation problem for time-varying linear systems via state feedback. Two types of controllers are designed by utilising solutions to Lyapunov differential equations. The first type of feedback controllers involves the unique positive-definite solution to a parametric Lyapunov differential equation, which can be solved when either the state transition matrix of the open-loop system is exactly known, or the future information of the system matrices are accessible in advance. Different from the first class of controllers which may be difficult to implement in practice, the second type of controllers can be easily implemented by solving a state-dependent Lyapunov differential equation with a given positive-definite initial condition. In both cases, explicit conditions are obtained to guarantee the exponentially asymptotic stability of the associated closed-loop systems. Numerical examples show the effectiveness of the proposed approaches.

Finite-time stability and synchronization of memristor-based fractional-order fuzzy cellular neural networks

NASA Astrophysics Data System (ADS)

Zheng, Mingwen; Li, Lixiang; Peng, Haipeng; Xiao, Jinghua; Yang, Yixian; Zhang, Yanping; Zhao, Hui

2018-06-01

This paper mainly studies the finite-time stability and synchronization problems of memristor-based fractional-order fuzzy cellular neural network (MFFCNN). Firstly, we discuss the existence and uniqueness of the Filippov solution of the MFFCNN according to the Banach fixed point theorem and give a sufficient condition for the existence and uniqueness of the solution. Secondly, a sufficient condition to ensure the finite-time stability of the MFFCNN is obtained based on the definition of finite-time stability of the MFFCNN and Gronwall-Bellman inequality. Thirdly, by designing a simple linear feedback controller, the finite-time synchronization criterion for drive-response MFFCNN systems is derived according to the definition of finite-time synchronization. These sufficient conditions are easy to verify. Finally, two examples are given to show the effectiveness of the proposed results.

Engineering model system study for a regenerative fuel cell: Study report

NASA Technical Reports Server (NTRS)

Chang, B. J.; Schubert, F. H.; Kovach, A. J.; Wynveen, R. A.

1984-01-01

Key design issues of the regenerative fuel cell system concept were studied and a design definition of an alkaline electrolyte based engineering model system or low Earth orbit missions was completed. Definition of key design issues for a regenerative fuel cell system include gaseous reactant storage, shared heat exchangers and high pressure pumps. A power flow diagram for the 75 kW initial space station and the impact of different regenerative fuel cell modular sizes on the total 5 year to orbit weight and volume are determined. System characteristics, an isometric drawing, component sizes and mass and energy balances are determined for the 10 kW engineering model system. An open loop regenerative fuel cell concept is considered for integration of the energy storage system with the life support system of the space station. Technical problems and their solutions, pacing technologies and required developments and demonstrations for the regenerative fuel cell system are defined.

Designing Extensible Data Management for Ocean Observatories, Platforms, and Devices

NASA Astrophysics Data System (ADS)

Graybeal, J.; Gomes, K.; McCann, M.; Schlining, B.; Schramm, R.; Wilkin, D.

2002-12-01

The Monterey Bay Aquarium Research Institute (MBARI) has been collecting science data for 15 years from all kinds of oceanographic instruments and systems, and is building a next-generation observing system, the MBARI Ocean Observing System (MOOS). To meet the data management requirements of the MOOS, the Institute began developing a flexible, extensible data management solution, the Shore Side Data System (SSDS). This data management system must address a wide variety of oceanographic instruments and data sources, including instruments and platforms of the future. Our data management solution will address all elements of the data management challenge, from ingest (including suitable pre-definition of metadata) through to access and visualization. Key to its success will be ease of use, and automatic incorporation of new data streams and data sets. The data will be of many different forms, and come from many different types of instruments. Instruments will be designed for fixed locations (as with moorings), changing locations (drifters and AUVs), and cruise-based sampling. Data from airplanes, satellites, models, and external archives must also be considered. Providing an architecture which allows data from these varied sources to be automatically archived and processed, yet readily accessed, is only possible with the best practices in metadata definition, software design, and re-use of third-party components. The current status of SSDS development will be presented, including lessons learned from our science users and from previous data management designs.

Preliminary design package for residential heating/cooling system: Rankine air conditioner redesign

NASA Technical Reports Server (NTRS)

1978-01-01

A summary of the preliminary redesign and development of a marketable single family heating and cooling system is presented. The interim design and schedule status of the residential (3-ton) redesign, problem areas and solutions, and the definition of plans for future design and development activities were discussed. The proposed system for a single-family residential heating and cooling system is a single-loop, solar-assisted, hydronic-to-warm-air heating subsystem with solar-assisted domestic water heating and a Rankine-driven expansion air-conditioning subsystem.

International interface design for Space Station Freedom - Challenges and solutions

NASA Technical Reports Server (NTRS)

Mayo, Richard E.; Bolton, Gordon R.; Laurini, Daniele

1988-01-01

The definition of interfaces for the International Space Station is discussed, with a focus on negotiations between NASA and ESA. The program organization and division of responsibilities for the Space Station are outlined; the basic features of physical and functional interfaces are described; and particular attention is given to the interface management and documentation procedures, architectural control elements, interface implementation and verification, and examples of Columbus interface solutions (including mechanical, ECLSS, thermal-control, electrical, data-management, standardized user, and software interfaces). Diagrams, drawings, graphs, and tables listing interface types are provided.

A computer package for the design and eigenproblem solution of damped linear multidegree of freedom systems

NASA Technical Reports Server (NTRS)

Ahmadian, M.; Inman, D. J.

1982-01-01

Systems described by the matrix differental equation are considered. An interactive design routine is presented for positive definite mass, damping, and stiffness matrices. Designing is accomplished by adjusting the mass, damping, and stiffness matrices to obtain a desired oscillation behavior. The algorithm also features interactively modifying the physical structure of the system, obtaining the matrix structure and a number of other system properties. In case of a general system, where the M, C, and K matrices lack any special properties, a routine for the eigenproblem solution of the system is developed. The latent roots are obtained by computing the characteristic polynomial of the system and solving for its roots. The above routines are prepared in FORTRAN IV and prove to be usable for the machines with low core memory.

Evaluation of H.264 and H.265 full motion video encoding for small UAS platforms

NASA Astrophysics Data System (ADS)

McGuinness, Christopher D.; Walker, David; Taylor, Clark; Hill, Kerry; Hoffman, Marc

2016-05-01

Of all the steps in the image acquisition and formation pipeline, compression is the only process that degrades image quality. A selected compression algorithm succeeds or fails to provide sufficient quality at the requested compression rate depending on how well the algorithm is suited to the input data. Applying an algorithm designed for one type of data to a different type often results in poor compression performance. This is mostly the case when comparing the performance of H.264, designed for standard definition data, to HEVC (High Efficiency Video Coding), which the Joint Collaborative Team on Video Coding (JCT-VC) designed for high-definition data. This study focuses on evaluating how HEVC compares to H.264 when compressing data from small UAS platforms. To compare the standards directly, we assess two open-source traditional software solutions: x264 and x265. These software-only comparisons allow us to establish a baseline of how much improvement can generally be expected of HEVC over H.264. Then, specific solutions leveraging different types of hardware are selected to understand the limitations of commercial-off-the-shelf (COTS) options. Algorithmically, regardless of the implementation, HEVC is found to provide similar quality video as H.264 at 40% lower data rates for video resolutions greater than 1280x720, roughly 1 Megapixel (MPx). For resolutions less than 1MPx, H.264 is an adequate solution though a small (roughly 20%) compression boost is earned by employing HEVC. New low cost, size, weight, and power (CSWAP) HEVC implementations are being developed and will be ideal for small UAS systems.

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Distortion definition and correction in off-axis systems

NASA Astrophysics Data System (ADS)

Da Deppo, Vania; Simioni, Emanuele; Naletto, Giampiero; Cremonese, Gabriele

2015-09-01

Off-axis optical configurations are becoming more and more used in a variety of applications, in particular they are the most preferred solution for cameras devoted to Solar System planets and small bodies (i.e. asteroids and comets) study. Off-axis designs, being devoid of central obstruction, are able to guarantee better PSF and MTF performance, and thus higher contrast imaging capabilities with respect to classical on-axis designs. In particular they are suitable for observing extended targets with intrinsic low contrast features, or scenes where a high dynamical signal range is present. Classical distortion theory is able to well describe the performance of the on-axis systems, but it has to be adapted for the off-axis case. A proper way to deal with off-axis distortion definition is thus needed together with dedicated techniques to accurately measure and hence remove the distortion effects present in the acquired images. In this paper, a review of the distortion definition for off-axis systems will be given. In particular the method adopted by the authors to deal with the distortion related issues (definition, measure, removal) in some off-axis instruments will be described in detail.

Maximizing algebraic connectivity in air transportation networks

NASA Astrophysics Data System (ADS)

Wei, Peng

In air transportation networks the robustness of a network regarding node and link failures is a key factor for its design. An experiment based on the real air transportation network is performed to show that the algebraic connectivity is a good measure for network robustness. Three optimization problems of algebraic connectivity maximization are then formulated in order to find the most robust network design under different constraints. The algebraic connectivity maximization problem with flight routes addition or deletion is first formulated. Three methods to optimize and analyze the network algebraic connectivity are proposed. The Modified Greedy Perturbation Algorithm (MGP) provides a sub-optimal solution in a fast iterative manner. The Weighted Tabu Search (WTS) is designed to offer a near optimal solution with longer running time. The relaxed semi-definite programming (SDP) is used to set a performance upper bound and three rounding techniques are discussed to find the feasible solution. The simulation results present the trade-off among the three methods. The case study on two air transportation networks of Virgin America and Southwest Airlines show that the developed methods can be applied in real world large scale networks. The algebraic connectivity maximization problem is extended by adding the leg number constraint, which considers the traveler's tolerance for the total connecting stops. The Binary Semi-Definite Programming (BSDP) with cutting plane method provides the optimal solution. The tabu search and 2-opt search heuristics can find the optimal solution in small scale networks and the near optimal solution in large scale networks. The third algebraic connectivity maximization problem with operating cost constraint is formulated. When the total operating cost budget is given, the number of the edges to be added is not fixed. Each edge weight needs to be calculated instead of being pre-determined. It is illustrated that the edge addition and the weight assignment can not be studied separately for the problem with operating cost constraint. Therefore a relaxed SDP method with golden section search is developed to solve both at the same time. The cluster decomposition is utilized to solve large scale networks.

Transformations of software design and code may lead to reduced errors

NASA Technical Reports Server (NTRS)

Connelly, E. M.

1983-01-01

The capability of programmers and non-programmers to specify problem solutions by developing example-solutions and also for the programmers by writing computer programs was investigated; each method of specification was accomplished at various levels of problem complexity. The level of difficulty of each problem was reflected by the number of steps needed by the user to develop a solution. Machine processing of the user inputs permitted inferences to be developed about the algorithms required to solve a particular problem. The interactive feedback of processing results led users to a more precise definition of the desired solution. Two participant groups (programmers and bookkeepers/accountants) working with three levels of problem complexity and three levels of processor complexity were used. The experimental task employed required specification of a logic for solution of a Navy task force problem.

Play-Personas: Behaviours and Belief Systems in User-Centred Game Design

NASA Astrophysics Data System (ADS)

Canossa, Alessandro; Drachen, Anders

Game designers attempt to ignite affective, emotional responses from players via engineering game designs to incite definite user experiences. Theories of emotion state that definite emotional responses are individual, and caused by the individual interaction sequence or history. Engendering desired emotions in the audience of traditional audiovisual media is a considerable challenge; however it is potentially even more difficult to achieve the same goal for the audience of interactive entertainment, because a substantial degree of control rests in the hand of the end user rather than the designer. This paper presents a possible solution to the challenge of integrating the user in the design of interactive entertainment such as computer games by employing the "persona" framework introduced by Alan Cooper. This approach is already in use in interaction design. The method can be improved by complementing the traditional narrative description of personas with quantitative, data-oriented models of predicted patterns of user behaviour for a specific computer game Additionally, persona constructs can be applied both as design-oriented metaphors during the development of games, and as analytical lenses to existing games, e.g. for evaluation of patterns of player behaviour.

Identified research directions for using manufacturing knowledge earlier in the product lifecycle

PubMed Central

Hedberg, Thomas D.; Hartman, Nathan W.; Rosche, Phil; Fischer, Kevin

2016-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle. PMID:27990027

Identified research directions for using manufacturing knowledge earlier in the product lifecycle.

PubMed

Hedberg, Thomas D; Hartman, Nathan W; Rosche, Phil; Fischer, Kevin

2017-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle.

Analytic Corrections to CFD Heating Predictions Accounting for Changes in Surface Catalysis. Part II

NASA Technical Reports Server (NTRS)

Gnoffo, Peter A.; Inger, George R.

1996-01-01

A new approach for combining the insight afforded by integral boundary-layer analysis with comprehensive (but time intensive) computational fluid dynamic (CFD) flowfield solutions of the thin-layer Navier-Stokes equations is described. The approach extracts CFD derived quantities at the wall and at the boundary layer edge for inclusion in a post-processing boundary-layer analysis. It allows a designer at a work-station to address two questions, given a single CFD solution. (1) How much does the heating change for a thermal protection system (TPS) with different catalytic properties than was used in the original CFD solution? (2) How does the heating change at the interface of two different TPS materials with an abrupt change in catalytic efficiency? The answer to the second question is particularly important, because abrupt changes from low to high catalytic efficiency can lead to localized increase in heating which exceeds the usually conservative estimate provided by a fully catalytic wall assumption. Capabilities of this approach for application to Reusable Launch Vehicle (RLV) design are demonstrated. If the definition of surface catalysis is uncertain early in the design process, results show that fully catalytic wall boundary conditions provide the best baseline for CFD design points.

The Modification of Educational Equipment and Curriculum for Maximum Utilization by Physically Disabled Persons; Curriculum and Instructional Techniques for Physically Disabled Students. Human Resources Study Number 12.

ERIC Educational Resources Information Center

Nemarich, Samuel P.; Velleman, Ruth A.

Designed to suggest solutions to problems of curricula and instructional techniques for physically disabled children, the text considers the nature of the child and discusses these aspects of curriculum and methods: definitions and objectives; teachers and administrators; time requirements and enrichment; grouping; reading instruction; testing,…

Design requirements for plasma facing materials in ITER

NASA Astrophysics Data System (ADS)

Matera, R.; Federici, G.; ITER Joint Central Team

1996-10-01

After the official approval of the Interim Design Report, the ITER project enters the final phase of the EDA. With the definition of the design requirements of the high heat flux components, the structural and armor materials' working domain is better specified, allowing to focus the R & D program on the most critical issues and to orient the design of divertor and first wall components towards those concepts which potentially have a better chance to withstand normal and off-normal operating conditions. Among the latter, slow, high-power, high recycling transient are at present driving the design of high heat flux components. Examples of possible design solution under experimental validation in the R & D program are presented and discussed in this paper.

Desing of Digital Calliper for Control of Selected Parameters of Railway Wheels

NASA Astrophysics Data System (ADS)

Ticha, Šarka; Zelnak, Michal; Vavrina, Jan

2014-12-01

This contribution deals with new design of digital calliper for transferring of width dimension scale from the ring interface to tyre of railway wheel. Based on the problem definition were solved variants of design with possibility of improvement current measurement technique. For selected variant of production was developed calibration procedures for ensure of required accuracy. At the end solution that was significantly influenced by economic recession was realized variant for single production. Manufacturer and exclusive supplier of this digital calliper is UNIMETRA Company, Ltd.

Specializing architectures for the type 2 diabetes mellitus care use cases with a focus on process management.

PubMed

Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Ruiz, Alonso A

2015-01-01

The development of software supporting inter-disciplinary systems like the type 2 diabetes mellitus care requires the deployment of methodologies designed for this type of interoperability. The GCM framework allows the architectural description of such systems and the development of software solutions based on it. A first step of the GCM methodology is the definition of a generic architecture, followed by its specialization for specific use cases. This paper describes the specialization of the generic architecture of a system, supporting Type 2 diabetes mellitus glycemic control, for a pharmacotherapy use case. It focuses on the behavioral aspect of the system, i.e. the policy domain and the definition of the rules governing the system. The design of this architecture reflects the inter-disciplinary feature of the methodology. Finally, the resulting architecture allows building adaptive, intelligent and complete systems.

Three-Dimensional Field Solutions for Multi-Pole Cylindrical Halbach Arrays in an Axial Orientation

NASA Technical Reports Server (NTRS)

Thompson, William K.

2006-01-01

This article presents three-dimensional B field solutions for the cylindrical Halbach array in an axial orientation. This arrangement has applications in the design of axial motors and passive axial magnetic bearings and couplers. The analytical model described here assumes ideal magnets with fixed and uniform magnetization. The field component functions are expressed as sums of 2-D definite integrals that are easily computed by a number of mathematical analysis software packages. The analysis is verified with sample calculations and the results are compared to equivalent results from traditional finite-element analysis (FEA). The field solutions are then approximated for use in flux linkage and induced EMF calculations in nearby stator windings by expressing the field variance with angular displacement as pure sinusoidal function whose amplitude depends on radial and axial position. The primary advantage of numerical implementation of the analytical approach presented in the article is that it lends itself more readily to parametric analysis and design tradeoffs than traditional FEA models.

Implementing Target Value Design.

PubMed

Alves, Thais da C L; Lichtig, Will; Rybkowski, Zofia K

2017-04-01

An alternative to the traditional way of designing projects is the process of target value design (TVD), which takes different departure points to start the design process. The TVD process starts with the client defining an allowable cost that needs to be met by the design and construction teams. An expected cost in the TVD process is defined through multiple interactions between multiple stakeholders who define wishes and others who define ways of achieving these wishes. Finally, a target cost is defined based on the expected profit the design and construction teams are expecting to make. TVD follows a series of continuous improvement efforts aimed at reaching the desired goals for the project and its associated target value cost. The process takes advantage of rapid cycles of suggestions, analyses, and implementation that starts with the definition of value for the client. In the traditional design process, the goal is to identify user preferences and find solutions that meet the needs of the client's expressed preferences. In the lean design process, the goal is to educate users about their values and advocate for a better facility over the long run; this way owners can help contractors and designers to identify better solutions. This article aims to inform the healthcare community about tools and techniques commonly used during the TVD process and how they can be used to educate and support project participants in developing better solutions to meet their needs now as well as in the future.

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Current status of the EPOS WG4 - GNSS and Other Geodetic Data

NASA Astrophysics Data System (ADS)

Fernandes, Rui; Bastos, Luísa; Bruyninx, Carine; D'Agostino, Nicola; Dousa, Jan; Ganas, Athanassios; Lidberg, Martin; Nocquet, Jean-Mathieu

2013-04-01

WG4 - "EPOS Geodetic Data and Other Geodetic Data" is the Working Group of the EPOS project in charge of defining and preparing the integration of the existing Pan-European Geodetic Infrastructures that will support the European Geosciences, which is the ultimate goal of the EPOS project. The WG4 is formed by representatives of the participating EPOS countries (23) but it is also open to the entire geodetic community. In fact, WG4 also includes members from countries that formally are not part of the current phase of EPOS. In an ongoing effort, the majority of existing GNSS Research Infrastructures in Europe were identified. The current database, available at http://epos-couch.cloudant.com/epos-couch/_design/epos-couch/, lists a total of 50 Research Infrastructures managing a total of 1534 GNSS CORS sites. This presentation intends to detail the work being produced within the working group WG4 related with the definition of strategies towards the implementation of the best solutions that will permit to the end-users, and in particular geo-scientists, to access the geodetic data, derived solutions, and associated metadata using transparent and uniform processes. The first step toward the design of an implementation and business plan is the definition of the core services for geodetic data within EPOS. In this talk, we will present the current status of the discussion about the content of core services. Three levels of core services could be distinguished, for which their content need to be defined. The 3 levels are: (1) the core services associated to data (diffusion, archive, long-term preservation, quality check, rapid analysis) (2) core services associated to geodetic products (analysis, products definition like position time series, velocity field and Zenithal Total Delay) (3) User oriented services (reference frames, real-time solutions for early warning systems, strain rate maps, meteorology, space weather, …). Current propositions and remaining open questions will be discussed.

Spacecraft drag-free technology development: On-board estimation and control synthesis

NASA Technical Reports Server (NTRS)

Key, R. W.; Mettler, E.; Milman, M. H.; Schaechter, D. B.

1982-01-01

Estimation and control methods for a Drag-Free spacecraft are discussed. The functional and analytical synthesis of on-board estimators and controllers for an integrated attitude and translation control system is represented. The framework for detail definition and design of the baseline drag-free system is created. The techniques for solution of self-gravity and electrostatic charging problems are applicable generally, as is the control system development.

Conceptual IT model

NASA Astrophysics Data System (ADS)

Arnaoudova, Kristina; Stanchev, Peter

2015-11-01

The business processes are the key asset for every organization. The design of the business process models is the foremost concern and target among an organization's functions. Business processes and their proper management are intensely dependent on the performance of software applications and technology solutions. The paper is attempt for definition of new Conceptual model of IT service provider, it could be examined as IT focused Enterprise model, part of Enterprise Architecture (EA) school.

Aerodynamic shape optimization of a HSCT type configuration with improved surface definition

NASA Technical Reports Server (NTRS)

Thomas, Almuttil M.; Tiwari, Surendra N.

1994-01-01

Two distinct parametrization procedures of generating free-form surfaces to represent aerospace vehicles are presented. The first procedure is the representation using spline functions such as nonuniform rational b-splines (NURBS) and the second is a novel (geometrical) parametrization using solutions to a suitably chosen partial differential equation. The main idea is to develop a surface which is more versatile and can be used in an optimization process. Unstructured volume grid is generated by an advancing front algorithm and solutions obtained using an Euler solver. Grid sensitivity with respect to surface design parameters and aerodynamic sensitivity coefficients based on potential flow is obtained using an automatic differentiator precompiler software tool. Aerodynamic shape optimization of a complete aircraft with twenty four design variables is performed. High speed civil transport aircraft (HSCT) configurations are targeted to demonstrate the process.

Rationale for the Definition of the Particular Solution to an Initial Value Problem: A Unique Solution Is Guaranteed

ERIC Educational Resources Information Center

Perna, James

2016-01-01

The purpose of this article is to examine the reasoning behind the wording of the definition of the particular solution to an initial value problem. This article will be of practical importance for students taking a first year calculus course that includes the study of first order linear separable differential equations.

Approach to an Affordable and Sustainable Space Transportation System

NASA Technical Reports Server (NTRS)

McCleskey, Caey M.; Rhodes, R. E.; Robinson, J. W.; Henderson, E. M.

2012-01-01

This paper describes an approach and a general procedure for creating space transportation architectural concepts that are at once affordable and sustainable. Previous papers by the authors and other members of the Space Propulsion Synergy Team (SPST) focused on a functional system breakdown structure for an architecture and definition of high-payoff design techniques with a technology integration strategy. This paper follows up by using a structured process that derives architectural solutions focused on achieving life cycle affordability and sustainability. Further, the paper includes an example concept that integrates key design techniques discussed in previous papers. !

A Planning Framework for the Deployment of Innovative Information and Communication Technologies in Procurement

NASA Astrophysics Data System (ADS)

Alard, Robert; Gustafsson, Martin; Nienhaus, Jörg

The management of buyer-supplier relations is a major topic for many enterprises today. Modern Information and Communication Technologies (ICT) offer interesting perspectives on opportunities and implementation approaches. Today, logistics and procurement departments of numerous enterprises are evaluating the possibilities and opportunities of new ICT solutions and especially of internet-based electronic procurement solutions for the optimisation and re-engineering of their buyer-supplier relationships. Due to the highly innovative character of the new ICT solutions and the scarcely available operational examples in the industry, only little guidance exists to support responsible managers during the evaluation, planning and designing of internet-based electronic procurement solutions. This paper describes a framework for the strategic evaluation and planning of the deployment of internet-based procurement solutions for direct materials. The presented approach supports enterprises in the analysis of procurement objects and procurement structuring, in the definition and management of buyer-supplier-relationships, in the requirements analysis of ICT solutions as well as the assessment of the potential to support procurement with innovative ICT and internet-based electronic procurement solutions.

Convection Regularization of High Wavenumbers in Turbulence ANS Shocks

DTIC Science & Technology

2011-07-31

dynamics of particles that adhere to one another upon collision and has been studied as a simple cosmological model for describing the nonlinear formation of...solution we mean a solution to the Cauchy problem in the following sense. Definition 5.1. A function u : R × [0, T ] 7→ RN is a weak solution of the...step 2 the limit function in the α → 0 limit is shown to satisfy the definition of a weak solution for the Cauchy problem. Without loss of generality

Construction of the Dependence Matrix Based on the TRIZ Contradiction Matrix in OOD

NASA Astrophysics Data System (ADS)

Ma, Jianhong; Zhang, Quan; Wang, Yanling; Luo, Tao

In the Object-Oriented software design (OOD), design of the class and object, definition of the classes’ interface and inheritance levels and determination of dependent relations have a serious impact on the reusability and flexibility of the system. According to the concrete problems of design, how to select the right solution from the hundreds of the design schemas which has become the focus of attention of designers. After analyzing lots of software design schemas in practice and Object-Oriented design patterns, this paper constructs the dependence matrix of Object-Oriented software design filed, referring to contradiction matrix of TRIZ (Theory of Inventive Problem Solving) proposed by the former Soviet Union innovation master Altshuller. As the practice indicates, it provides a intuitive, common and standardized method for designers to choose the right design schema. Make research and communication more effectively, and also improve the software development efficiency and software quality.

Mars aqueous chemistry experiment

NASA Technical Reports Server (NTRS)

Clark, Benton C.; Mason, Larry W.

1994-01-01

Mars Aqueous Chemistry Experiment (MACE) is designed to conduct a variety of measurements on regolith samples, encompassing mineral phase analyses, chemical interactions with H2O, and physical properties determinations. From these data, much can be learned or inferred regarding the past weathering environment, the contemporaneous soil micro-environments, and the general chemical and physical state of the Martian regolith. By analyzing both soil and duricrust samples, the nature of the latter may become more apparent. Sites may be characterized for comparative purposes and criteria could be set for selection of high priority materials on future sample return missions. The second year of the MACE project has shown significant progress in two major areas. MACE Instrument concept definition is a baseline design that has been generated for the complete MACE instrument, including definition of analysis modes, mass estimates and thermal model. The design includes multiple reagent reservoirs, 10 discrete analysis cells, sample manipulation capability, and thermal control. The MACE Measurement subsystems development progress is reported regarding measurement capabilities for aqueous ion sensing, evolved gas sensing, solution conductivity measurement, reagent addition (titration) capabilities, and optical sensing of suspended particles.

Mars aqueous chemistry experiment

NASA Astrophysics Data System (ADS)

Clark, Benton C.; Mason, Larry W.

1994-06-01

Mars Aqueous Chemistry Experiment (MACE) is designed to conduct a variety of measurements on regolith samples, encompassing mineral phase analyses, chemical interactions with H2O, and physical properties determinations. From these data, much can be learned or inferred regarding the past weathering environment, the contemporaneous soil micro-environments, and the general chemical and physical state of the Martian regolith. By analyzing both soil and duricrust samples, the nature of the latter may become more apparent. Sites may be characterized for comparative purposes and criteria could be set for selection of high priority materials on future sample return missions. The second year of the MACE project has shown significant progress in two major areas. MACE Instrument concept definition is a baseline design that has been generated for the complete MACE instrument, including definition of analysis modes, mass estimates and thermal model. The design includes multiple reagent reservoirs, 10 discrete analysis cells, sample manipulation capability, and thermal control. The MACE Measurement subsystems development progress is reported regarding measurement capabilities for aqueous ion sensing, evolved gas sensing, solution conductivity measurement, reagent addition (titration) capabilities, and optical sensing of suspended particles.

SINERGIA laparoscopic virtual reality simulator: didactic design and technical development.

PubMed

Lamata, Pablo; Gómez, Enrique J; Sánchez-Margallo, Francisco M; López, Oscar; Monserrat, Carlos; García, Verónica; Alberola, Carlos; Florido, Miguel Angel Rodríguez; Ruiz, Juan; Usón, Jesús

2007-03-01

VR laparoscopic simulators have demonstrated its validity in recent studies, and research should be directed towards a high training effectiveness and efficacy. In this direction, an insight into simulators' didactic design and technical development is provided, by describing the methodology followed in the building of the SINERGIA simulator. It departs from a clear analysis of training needs driven by a surgical training curriculum. Existing solutions and validation studies are an important reference for the definition of specifications, which are described with a suitable use of simulation technologies. Five new didactic exercises are proposed to train some of the basic laparoscopic skills. Simulator construction has required existing algorithms and the development of a particle-based biomechanical model, called PARSYS, and a collision handling solution based in a multi-point strategy. The resulting VR laparoscopic simulator includes new exercises and enhanced simulation technologies, and is finding a very good acceptance among surgeons.

An industrial perspective on the design and development of medicines for older patients.

PubMed

Page, Sharon; Coupe, Alastair; Barrett, Andrew

2016-10-30

An increasing elderly population is leading to a change in the global demographics. This presents a new challenge to society and the pharmaceutical industry. This demographic shift is providing an opportunity for the pharmaceutical industry to meet the specific needs of the changing patient population. One issue that has been identified is defining what is meant by "an older patient", since this definition cannot be simply limited to chronological age. The fundamental purpose of the design and development process is to create a product that can be used by the patient group in a safe and efficacious manner. In the pharmaceutical industry ICH Q8 is used to guide the design and development of medicines. The process leads to the definition of the Quality Target Product Profile (QTPP) for a specific drug product and patient population. One can imagine a product with various presentations described in the QTPP which suit paediatrics, adults and older patients. It is recognised that designing medicines for smaller population groups will result in multiple presentations that could lead to smaller manufacturing batch sizes. In the short to medium term; dose flexibility, easy-to-swallow formulations, and easier access packaging are all factors under consideration. Dose flexibility could be achieved with various dosage forms such as oral liquids, mini-tablets, or multi-particulates. Whilst patient dosage preferences are beginning to be understood, further investigation is needed to balance the needs of the patient, care giver, prescriber, and payer. There also remain a number of challenges with the engineering solutions and delivery device for mini-tablets and multi-particulates (aside from filled capsules) to accurately and robustly deliver the dose, and issues with handling the device and the packaging for an older patient. It is also recognised that there are numerous challenges, not least of which is the definition of the older patient and a generic QTPP for an older patients' drug product. It is likely that there will be no simple solution or 'one-size-fits-all' approach in drug product development to resolve the complex issues presented by the ageing population. Copyright © 2016 Elsevier B.V. All rights reserved.

The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Nakazawa, Shohei

1989-01-01

The user options available for running the MHOST finite element analysis package is described. MHOST is a solid and structural analysis program based on the mixed finite element technology, and is specifically designed for 3-D inelastic analysis. A family of 2- and 3-D continuum elements along with beam and shell structural elements can be utilized, many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. The outline of solution algorithms is discussed along with the data input and output, analysis options including the user subroutines and the definition of the finite elements implemented in the program package.

Upstream Design and 1D-CAE

NASA Astrophysics Data System (ADS)

Sawada, Hiroyuki

Recently, engineering design environment of Japan is changing variously. Manufacturing companies are being challenged to design and bring out products that meet the diverse demands of customers and are competitive against those produced by rising countries(1). In order to keep and strengthen the competitiveness of Japanese companies, it is necessary to create new added values as well as conventional ones. It is well known that design at the early stages has a great influence on the final design solution. Therefore, design support tools for the upstream design is necessary for creating new added values. We have established a research society for 1D-CAE (1 Dimensional Computer Aided Engineering)(2), which is a general term for idea, methodology and tools applicable for the upstream design support, and discuss the concept and definition of 1D-CAE. This paper reports our discussion about 1D-CAE.

Apollo experience report: Electrical wiring subsystem

NASA Technical Reports Server (NTRS)

White, L. D.

1975-01-01

The general requirements of the electrical wiring subsystems and the problem areas and solutions that occurred during the major part of the Apollo Program are detailed in this report. The concepts and definitions of specific requirements for electrical wiring; wire-connecting devices; and wire-harness fabrication, checkout, and installation techniques are discussed. The design and development of electrical wiring and wire-connecting devices are described. Mission performance is discussed, and conclusions and recommendations for future programs are presented.

Resolving Phase Ambiguities in the Calibration of Redundant Interferometric Arrays: Implications for Array Design

DTIC Science & Technology

2016-03-04

summary of the linear algebra involved. As we have seen, the RSC process begins with the interferometric phase measurement β, which due to wrapping will...mentary Divisors) in Section 2 and the following defi- nition of the matrix determinant. This definition is given in many linear algebra texts (see...principle solve for a particular solution of this system by arbitrarily setting two object phases (whose spatial frequencies are not co- linear ) and one

New Tables For IABG's 320kN Shaker System: Design And Procurement Process

NASA Astrophysics Data System (ADS)

Baumgartl, Ralf

2012-07-01

For more than 25 years IABG is operating its 320kN vibration system in testing of space and non-space applications. The vibration system is a multi shaker system, using four electrodynamic shakers, driving a 3x3m2 head expander and a 3x3m2 slip table. During the recent years a modernisation program of the shaker system has been implemented. The purpose of this program was to exchange system components, which have reached their expected duration of life, as well as to exchange components which did no longer fulfil the state-of-the-art requirements in testing and thus to adapt the vibration system to future challenges. Two major components of the shaker system, which have been covered during the modernisation program, are the shaker tables (the head expander and the slip table). Being the direct interface of a vibration test facility to a specimen, the shaker tables are crucial regarding the shaker system overall performance. And this fact applies even more for shaker systems with large tables, because there are no off-the-shelf solutions in this area. During the recent 5 years IABG specified, designed and procured a new head expander and a new slip table for the 320kN shaker system. This paper describes the overall process investigating on the following listed aspects: - general requirements for the tables - definition of boundary conditions and guidance principles - specific areas of interest - definition of the table material and the manufacturing method - design solutions - challenges during manufacturing - results - table properties

Thermodynamics of Dilute Solutions.

ERIC Educational Resources Information Center

Jancso, Gabor; Fenby, David V.

1983-01-01

Discusses principles and definitions related to the thermodynamics of dilute solutions. Topics considered include dilute solution, Gibbs-Duhem equation, reference systems (pure gases and gaseous mixtures, liquid mixtures, dilute solutions), real dilute solutions (focusing on solute and solvent), terminology, standard states, and reference systems.…

Solar Array Power Conditioning for a Spinning Satellite

NASA Astrophysics Data System (ADS)

De Luca, Antonio; Chirulli, Giovanni

2008-09-01

The conditioning of the output power from a solar array can mainly be achieved by the adoption of DET or MPPT based architecture. There are several factors that can orientate the choice of the system designer towards one solution or the other; some of them maybe inherent to the mission derived requirements (Illumination levels, EMC cleanliness, etc.), others come directly from a careful assessment of performances and losses of both power conditioner and solar array.Definition of the criteria on which basis the final choice is justified is important as they have to guarantee a clear determination of the available versus the required power in all those mission conditions identifiable as design drivers for the overall satellite system both in terms of mass and costs.Such criteria cannot just be simple theoretical enunciations of principles; nor the meticulous definition of them on a case by case basis for different types of missions as neither option gives a guarantee of being conclusive.The aim of this paper is then to suggest assessment steps and guidelines that can be considered generically valid for any mission case, starting from the exposition of the trade off activity performed in order to choose the power conditioning solution for a spinning satellite having unregulated power bus architecture. Calculations and numerical simulations have been made in order to establish the needed solar array surface in case of adoption of a DET or MPPT solution, taking into account temperature and illumination levels on the solar cells, as well as power losses and inefficiencies from the solar generator to the main power bus, in different mission phases. Particular attention has been taken in order to correctly evaluate the thermal effects on the rest of the spacecraft as function of the adopted power system regulation.

Large-scale structural optimization

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.

1983-01-01

Problems encountered by aerospace designers in attempting to optimize whole aircraft are discussed, along with possible solutions. Large scale optimization, as opposed to component-by-component optimization, is hindered by computational costs, software inflexibility, concentration on a single, rather than trade-off, design methodology and the incompatibility of large-scale optimization with single program, single computer methods. The software problem can be approached by placing the full analysis outside of the optimization loop. Full analysis is then performed only periodically. Problem-dependent software can be removed from the generic code using a systems programming technique, and then embody the definitions of design variables, objective function and design constraints. Trade-off algorithms can be used at the design points to obtain quantitative answers. Finally, decomposing the large-scale problem into independent subproblems allows systematic optimization of the problems by an organization of people and machines.

Multi-disciplinary interoperability challenges (Ian McHarg Medal Lecture)

NASA Astrophysics Data System (ADS)

Annoni, Alessandro

2013-04-01

Global sustainability research requires multi-disciplinary efforts to address the key research challenges to increase our understanding of the complex relationships between environment and society. For this reason dependence on ICT systems interoperability is rapidly growing but, despite some relevant technological improvement is observed, in practice operational interoperable solutions are still lacking. Among the causes is the absence of a generally accepted definition of "interoperability" in all its broader aspects. In fact the concept of interoperability is just a concept and the more popular definitions are not addressing all challenges to realize operational interoperable solutions. The problem become even more complex when multi-disciplinary interoperability is required because in that case solutions for interoperability of different interoperable solution should be envisaged. In this lecture the following definition will be used: "interoperability is the ability to exchange information and to use it". In the lecture the main challenges for addressing multi-disciplinary interoperability will be presented and a set of proposed approaches/solutions shortly introduced.

Geometry definition and grid generation for a complete fighter aircraft

NASA Technical Reports Server (NTRS)

Edwards, T. A.

1986-01-01

Recent advances in computing power and numerical solution procedures have enabled computational fluid dynamicists to attempt increasingly difficult problems. In particular, efforts are focusing on computations of complex three-dimensional flow fields about realistic aerodynamic bodies. To perform such computations, a very accurate and detailed description of the surface geometry must be provided, and a three-dimensional grid must be generated in the space around the body. The geometry must be supplied in a format compatible with the grid generation requirements, and must be verified to be free of inconsistencies. This paper presents a procedure for performing the geometry definition of a fighter aircraft that makes use of a commercial computer-aided design/computer-aided manufacturing system. Furthermore, visual representations of the geometry are generated using a computer graphics system for verification of the body definition. Finally, the three-dimensional grids for fighter-like aircraft are generated by means of an efficient new parabolic grid generation method. This method exhibits good control of grid quality.

Geometry definition and grid generation for a complete fighter aircraft

NASA Technical Reports Server (NTRS)

Edwards, Thomas A.

1986-01-01

Recent advances in computing power and numerical solution procedures have enabled computational fluid dynamicists to attempt increasingly difficult problems. In particular, efforts are focusing on computations of complex three-dimensional flow fields about realistic aerodynamic bodies. To perform such computations, a very accurate and detailed description of the surface geometry must be provided, and a three-dimensional grid must be generated in the space around the body. The geometry must be supplied in a format compatible with the grid generation requirements, and must be verified to be free of inconsistencies. A procedure for performing the geometry definition of a fighter aircraft that makes use of a commercial computer-aided design/computer-aided manufacturing system is presented. Furthermore, visual representations of the geometry are generated using a computer graphics system for verification of the body definition. Finally, the three-dimensional grids for fighter-like aircraft are generated by means of an efficient new parabolic grid generation method. This method exhibits good control of grid quality.

Bias and design in software specifications

NASA Technical Reports Server (NTRS)

Straub, Pablo A.; Zelkowitz, Marvin V.

1990-01-01

Implementation bias in a specification is an arbitrary constraint in the solution space. Presented here is a model of bias in software specifications. Bias is defined in terms of the specification process and a classification of the attributes of the software product. Our definition of bias provides insight into both the origin and the consequences of bias. It also shows that bias is relative and essentially unavoidable. Finally, we describe current work on defining a measure of bias, formalizing our model, and relating bias to software defects.

Design of an airborne lidar for stratospheric aerosol measurements

NASA Technical Reports Server (NTRS)

Evans, W. E.

1977-01-01

A modular, multiple-telescope receiving concept is developed to gain a relatively large receiver collection aperture without requiring extensive modifications to the aircraft. This concept, together with the choice of a specific photodetector, signal processing, and data recording system capable of maintaining approximately 1% precision over the required large signal amplitude range, is found to be common to all of the options. It is recommended that development of the lidar begin by more detailed definition of solutions to these important common signal detection and recording problems.

Shape optimization of three-dimensional stamped and solid automotive components

NASA Technical Reports Server (NTRS)

Botkin, M. E.; Yang, R.-J.; Bennett, J. A.

1987-01-01

The shape optimization of realistic, 3-D automotive components is discussed. The integration of the major parts of the total process: modeling, mesh generation, finite element and sensitivity analysis, and optimization are stressed. Stamped components and solid components are treated separately. For stamped parts a highly automated capability was developed. The problem description is based upon a parameterized boundary design element concept for the definition of the geometry. Automatic triangulation and adaptive mesh refinement are used to provide an automated analysis capability which requires only boundary data and takes into account sensitivity of the solution accuracy to boundary shape. For solid components a general extension of the 2-D boundary design element concept has not been achieved. In this case, the parameterized surface shape is provided using a generic modeling concept based upon isoparametric mapping patches which also serves as the mesh generator. Emphasis is placed upon the coupling of optimization with a commercially available finite element program. To do this it is necessary to modularize the program architecture and obtain shape design sensitivities using the material derivative approach so that only boundary solution data is needed.

A system-of-systems modeling methodology for strategic general aviation design decision-making

NASA Astrophysics Data System (ADS)

Won, Henry Thome

General aviation has long been studied as a means of providing an on-demand "personal air vehicle" that bypasses the traffic at major commercial hubs. This thesis continues this research through development of a system of systems modeling methodology applicable to the selection of synergistic product concepts, market segments, and business models. From the perspective of the conceptual design engineer, the design and selection of future general aviation aircraft is complicated by the definition of constraints and requirements, and the tradeoffs among performance and cost aspects. Qualitative problem definition methods have been utilized, although their accuracy in determining specific requirement and metric values is uncertain. In industry, customers are surveyed, and business plans are created through a lengthy, iterative process. In recent years, techniques have developed for predicting the characteristics of US travel demand based on travel mode attributes, such as door-to-door time and ticket price. As of yet, these models treat the contributing systems---aircraft manufacturers and service providers---as independently variable assumptions. In this research, a methodology is developed which seeks to build a strategic design decision making environment through the construction of a system of systems model. The demonstrated implementation brings together models of the aircraft and manufacturer, the service provider, and most importantly the travel demand. Thus represented is the behavior of the consumers and the reactive behavior of the suppliers---the manufacturers and transportation service providers---in a common modeling framework. The results indicate an ability to guide the design process---specifically the selection of design requirements---through the optimization of "capability" metrics. Additionally, results indicate the ability to find synergetic solutions, that is solutions in which two systems might collaborate to achieve a better result than acting independently. Implementation of this methodology can afford engineers a more autonomous perspective in the concept exploration process, providing dynamic feedback about a design's potential success in specific market segments. The method also has potential to strengthen the connection between design and business departments, as well as between manufacturers, service providers, and infrastructure planners---bringing information about how the respective systems interact, and what might be done to improve synergism of systems.

Fuzzy α-minimum spanning tree problem: definition and solutions

NASA Astrophysics Data System (ADS)

Zhou, Jian; Chen, Lu; Wang, Ke; Yang, Fan

2016-04-01

In this paper, the minimum spanning tree problem is investigated on the graph with fuzzy edge weights. The notion of fuzzy ? -minimum spanning tree is presented based on the credibility measure, and then the solutions of the fuzzy ? -minimum spanning tree problem are discussed under different assumptions. First, we respectively, assume that all the edge weights are triangular fuzzy numbers and trapezoidal fuzzy numbers and prove that the fuzzy ? -minimum spanning tree problem can be transformed to a classical problem on a crisp graph in these two cases, which can be solved by classical algorithms such as the Kruskal algorithm and the Prim algorithm in polynomial time. Subsequently, as for the case that the edge weights are general fuzzy numbers, a fuzzy simulation-based genetic algorithm using Prüfer number representation is designed for solving the fuzzy ? -minimum spanning tree problem. Some numerical examples are also provided for illustrating the effectiveness of the proposed solutions.

Some trends and proposals for the inclusion of sustainability in the design of manufacturing process

NASA Astrophysics Data System (ADS)

Fradinho, J.; Nedelcu, D.; Gabriel-Santos, A.; Gonçalves-Coelho, A.; Mourão, A.

2015-11-01

Production processes are designed to meet requirements of three different natures, quality, cost and time. Environmental concerns have expanded the field of conceptual design through the introduction of sustainability requirements that are driven by the growing societal thoughtfulness about environmental issues. One could say that the major concern has been the definition of metrics or indices for sustainability. However, those metrics usually have some lack of consistency. More than ever, there is a need for an all-inclusive view at any level of decision-making, from the establishing of the design requirements to the implementation of the solutions. According to the Axiomatic Design Theory, sustainable designs are usually coupled designs that should be avoided. This raises a concern related to the very nature of sustainability: the cross effects between the actions that should be considered in the attempt to decouple the design solutions. In terms of production, one should clarify the characterization of the sustainability of production systems. The objectives of this paper are: i) to analyse some trends for approaching the sustainability of the production processes; ii) to define sustainability in terms of requirements for the design of the production processes; iii) to make some proposals based on the Axiomatic Design Theory, in order to establish the principles with which the guidelines for designing production processes must comply; iv) to discuss how to introduce this matter in teaching both manufacturing technology and design of production systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatterjee, Anupam; Department of Chemistry, Indian Institute of Technology Bombay, Powai, Mumbai 400076; Higham, Jonathan

A range of methods are presented to calculate a solute’s hydration shell from computer simulations of dilute solutions of monatomic ions and noble gas atoms. The methods are designed to be parameter-free and instantaneous so as to make them more general, accurate, and consequently applicable to disordered systems. One method is a modified nearest-neighbor method, another considers solute-water Lennard-Jones overlap followed by hydrogen-bond rearrangement, while three methods compare various combinations of water-solute and water-water forces. The methods are tested on a series of monatomic ions and solutes and compared with the values from cutoffs in the radial distribution function, themore » nearest-neighbor distribution functions, and the strongest-acceptor hydrogen bond definition for anions. The Lennard-Jones overlap method and one of the force-comparison methods are found to give a hydration shell for cations which is in reasonable agreement with that using a cutoff in the radial distribution function. Further modifications would be required, though, to make them capture the neighboring water molecules of noble-gas solutes if these weakly interacting molecules are considered to constitute the hydration shell.« less

Task Management in the New ATLAS Production System

NASA Astrophysics Data System (ADS)

De, K.; Golubkov, D.; Klimentov, A.; Potekhin, M.; Vaniachine, A.; Atlas Collaboration

2014-06-01

This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

24 CFR 35.110 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and Definitions for All Programs. § 35.110 Definitions. Abatement means any set of measures designed... is designed and performed so as to be permanent (see definition of “permanent”). Enclosure means the... of abatement if it is designed to be permanent (see definition of “permanent”). Environmental...

24 CFR 35.110 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and Definitions for All Programs. § 35.110 Definitions. Abatement means any set of measures designed... is designed and performed so as to be permanent (see definition of “permanent”). Enclosure means the... of abatement if it is designed to be permanent (see definition of “permanent”). Environmental...

24 CFR 35.110 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and Definitions for All Programs. § 35.110 Definitions. Abatement means any set of measures designed... is designed and performed so as to be permanent (see definition of “permanent”). Enclosure means the... of abatement if it is designed to be permanent (see definition of “permanent”). Environmental...

24 CFR 35.110 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and Definitions for All Programs. § 35.110 Definitions. Abatement means any set of measures designed... is designed and performed so as to be permanent (see definition of “permanent”). Enclosure means the... of abatement if it is designed to be permanent (see definition of “permanent”). Environmental...

24 CFR 35.110 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and Definitions for All Programs. § 35.110 Definitions. Abatement means any set of measures designed... is designed and performed so as to be permanent (see definition of “permanent”). Enclosure means the... of abatement if it is designed to be permanent (see definition of “permanent”). Environmental...

Standardized Definitions for Code Verification Test Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doebling, Scott William

This document contains standardized definitions for several commonly used code verification test problems. These definitions are intended to contain sufficient information to set up the test problem in a computational physics code. These definitions are intended to be used in conjunction with exact solutions to these problems generated using Exact- Pack, www.github.com/lanl/exactpack.

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric acid... regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means those solutions of...

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric acid... regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means those solutions of...

Space Station Furnace Facility. Volume 2: Requirements definition and conceptual design study

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Freedom Furnace (SSFF) Project is divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. TBE was awarded a research study entitled, 'Space Station Furnace Facility Requirements Definition and Conceptual Design Study' on June 2, 1989. This report addresses the definition study phase only. Phase 2 is to be complete after completion of phase 1. The contract encompassed a requirements definition study and culminated in hardware/facility conceptual designs and hardware demonstration development models to test these conceptual designs. The study was divided into two parts. Part 1 (the basic part of the effort) encompassed preliminary requirements definition and assessment; conceptional design of the SSFF Core; fabrication of mockups; and preparation for the support of a conceptional design review (CoDR). Part 2 (the optional part of the effort) included detailed definition of the engineering and design requirements, as derived from the science requirements; refinement of the conceptual design of the SSFF Core; fabrication and testing of the 'breadboards' or development models; and preparation for and support of a requirements definition review.

Scenario for concurrent conceptual assembly line design: A case study

NASA Astrophysics Data System (ADS)

Mas, F.; Ríos, J.; Menéndez, J. L.

2012-04-01

The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

[Age-adaptable to any age].

PubMed

Philippen, D P

1996-01-01

A definition separating the "elderly" from younger people should be avoided as well as any manifestation of any type of segregation. The environment must provide equal chances and opportunities for every person, regardless of age or abilities. Self-determined independence throughout life and the chance to remain in one's established home, community, and familiar environment require barrier-free design in all areas of the person's life-space. Dependencies and disabling factors can be diminished, and abilities can be restored by intensive rehabilitation and support of personal dignity, assisted by ambulant care and by products designed as barrier-free. They, lower the need for special aids and save costs. Such solutions are available. They must be applied with all consequences.

System Definition of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

NASA Technical Reports Server (NTRS)

Lundquist, Ray; Aymergen, Cagatay; VanCampen, Julie; Abell, James; Smith, Miles; Driggers, Phillip

2008-01-01

The Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST) provides the critical functions and the environment for the four science instruments on JWST. This complex system development across many international organizations presents unique challenges and unique solutions. Here we describe how the requirement flow has been coordinated through the documentation system, how the tools and processes are used to minimize impact to the development of the affected interfaces, how the system design has matured, how the design review process operates, and how the system implementation is managed through reporting to ensure a truly world class scientific instrument compliment is created as the final product.

ROENTGEN: case-based reasoning and radiation therapy planning.

PubMed Central

Berger, J.

1992-01-01

ROENTGEN is a design assistant for radiation therapy planning which uses case-based reasoning, an artificial intelligence technique. It learns both from specific problem-solving experiences and from direct instruction from the user. The first sort of learning is the normal case-based method of storing problem solutions so that they can be reused. The second sort is necessary because ROENTGEN does not, initially, have an internal model of the physics of its problem domain. This dependence on explicit user instruction brings to the forefront representational questions regarding indexing, failure definition, failure explanation and repair. This paper presents the techniques used by ROENTGEN in its knowledge acquisition and design activities. PMID:1482869

Dynamics of a Definition: A Framework to Analyse Student Construction of the Concept of Solution to a Differential Equation

ERIC Educational Resources Information Center

Raychaudhuri, Debasree

2008-01-01

In this note we develop a framework that makes explicit the inherent dynamic structure of certain mathematical definitions by means of the four facets of context-entity-process-object. These facets and their interrelations are then used to capture and interpret specific aspects of student constructions of the concept of solution to first order…

Aerodynamic heating environment definition/thermal protection system selection for the HL-20

NASA Astrophysics Data System (ADS)

Wurster, K. E.; Stone, H. W.

1993-09-01

Definition of the aerothermal environment is critical to any vehicle such as the HL-20 Personnel Launch System that operates within the hypersonic flight regime. Selection of an appropriate thermal protection system design is highly dependent on the accuracy of the heating-environment prediction. It is demonstrated that the entry environment determines the thermal protection system design for this vehicle. The methods used to predict the thermal environment for the HL-20 Personnel Launch System vehicle are described. Comparisons of the engineering solutions with computational fluid dynamic predictions, as well as wind-tunnel test results, show good agreement. The aeroheating predictions over several critical regions of the vehicle, including the stagnation areas of the nose and leading edges, windward centerline and wing surfaces, and leeward surfaces, are discussed. Results of predictions based on the engineering methods found within the MINIVER aerodynamic heating code are used in conjunction with the results of the extensive wind-tunnel tests on this configuration to define a flight thermal environment. Finally, the selection of the thermal protection system based on these predictions and current technology is described.

Performance results of cooperating expert systems in a distributed real-time monitoring system

NASA Technical Reports Server (NTRS)

Schwuttke, U. M.; Veregge, J. R.; Quan, A. G.

1994-01-01

There are numerous definitions for real-time systems, the most stringent of which involve guaranteeing correct system response within a domain-dependent or situationally defined period of time. For applications such as diagnosis, in which the time required to produce a solution can be non-deterministic, this requirement poses a unique set of challenges in dynamic modification of solution strategy that conforms with maximum possible latencies. However, another definition of real time is relevant in the case of monitoring systems where failure to supply a response in the proper (and often infinitesimal) amount of time allowed does not make the solution less useful (or, in the extreme example of a monitoring system responsible for detecting and deflecting enemy missiles, completely irrelevant). This more casual definition involves responding to data at the same rate at which it is produced, and is more appropriate for monitoring applications with softer real-time constraints, such as interplanetary exploration, which results in massive quantities of data transmitted at the speed of light for a number of hours before it even reaches the monitoring system. The latter definition of real time has been applied to the MARVEL system for automated monitoring and diagnosis of spacecraft telemetry. An early version of this system has been in continuous operational use since it was first deployed in 1989 for the Voyager encounter with Neptune. This system remained under incremental development until 1991 and has been under routine maintenance in operations since then, while continuing to serve as an artificial intelligence (AI) testbed in the laboratory. The system architecture has been designed to facilitate concurrent and cooperative processing by multiple diagnostic expert systems in a hierarchical organization. The diagnostic modules adhere to concepts of data-driven reasoning, constrained but complete nonoverlapping domains, metaknowledge of global consequences of anomalous data, hierarchical reporting of problems that extend beyond a single domain, and shared responsibility for problems that overlap domains. The system enables efficient diagnosis of complex system failures in real-time environments with high data volumes and moderate failure rates, as indicated by extensive performance measurements.

Specification, Design, and Analysis of Advanced HUMS Architectures

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

2004-01-01

During the two-year project period, we have worked on several aspects of domain-specific architectures for HUMS. In particular, we looked at using scenario-based approach for the design and designed a language for describing such architectures. The language is now being used in all aspects of our HUMS design. In particular, we have made contributions in the following areas. 1) We have employed scenarios in the development of HUMS in three main areas. They are: (a) To improve reusability by using scenarios as a library indexing tool and as a domain analysis tool; (b) To improve maintainability by recording design rationales from two perspectives - problem domain and solution domain; (c) To evaluate the software architecture. 2) We have defined a new architectural language called HADL or HUMS Architectural Definition Language. It is a customized version of xArch/xADL. It is based on XML and, hence, is easily portable from domain to domain, application to application, and machine to machine. Specifications written in HADL can be easily read and parsed using the currently available XML parsers. Thus, there is no need to develop a plethora of software to support HADL. 3) We have developed an automated design process that involves two main techniques: (a) Selection of solutions from a large space of designs; (b) Synthesis of designs. However, the automation process is not an absolute Artificial Intelligence (AI) approach though it uses a knowledge-based system that epitomizes a specific HUMS domain. The process uses a database of solutions as an aid to solve the problems rather than creating a new design in the literal sense. Since searching is adopted as the main technique, the challenges involved are: (a) To minimize the effort in searching the database where a very large number of possibilities exist; (b) To develop representations that could conveniently allow us to depict design knowledge evolved over many years; (c) To capture the required information that aid the automation process.

Multilayer coatings on glass for painting protection and optimized color rendering

NASA Astrophysics Data System (ADS)

Piegari, Angela; Polato, Pietro

2002-06-01

Optical coatings offer a solution to the problem of damage to paintings, caused by ultraviolet and infrared radiation, by cutting radiation wavelengths outside the visible range. Simultaneously, these coatings can enhance an observer's viewing of the paintings by reducing the reflections from ordinary glass panes. All these functions should be performed by the same coating. The design of such a coating, as well as the evaluation of existing products, requires the definition of an appropriate merit function in which coating absorption, high transparency, and color rendering are combined.

Status of the assessment phase of the ESA M3 mission candidate LOFT

NASA Astrophysics Data System (ADS)

Corral van Damme, Carlos; Ayre, Mark; Lumb, David; Short, Alexander D.; Rando, Nicola

2012-09-01

LOFT (Large Observatory For x-ray Timing) is one of four candidates for the M3 slot (launch in 2024, with the option of a launch in 2022) of ESAs Cosmic Vision 2015 - 2025 Plan, and as such it is currently undergoing an initial assessment phase lasting one year. The objective of the assessment phase is to provide the information required to enable the down selection process, in particular: the space segment definition for meeting the assigned science objectives; consideration of and initial definition of the implementation schedule; an estimate of the mission Cost at Completion (CaC); an evaluation of the technology readiness evaluation and risk assessment. The assessment phase is divided into two interleaved components: (i) A payload assessment study, performed by teams funded by member states, which is primarily intended for design, definition and programmatic/cost evaluation of the payload, and (ii) A system industrial study, which has essentially the same objectives for the space segment of the mission. This paper provides an overview of the status of the LOFT assessment phase, both for payload and platform. The initial focus is on the payload design status, providing the reader with an understanding of the main features of the design. Then the space segment assessment study status is presented, with an overview of the principal challenges presented by the LOFT payload and mission requirements, and a presentation of the expected solutions. Overall the mission is expected to enable cutting-edge science, is technically feasible, and should remain within the required CaC for an M3 candidate.

Accelerating potential of mean force calculations for lipid membrane permeation: System size, reaction coordinate, solute-solute distance, and cutoffs

NASA Astrophysics Data System (ADS)

Nitschke, Naomi; Atkovska, Kalina; Hub, Jochen S.

2016-09-01

Molecular dynamics simulations are capable of predicting the permeability of lipid membranes for drug-like solutes, but the calculations have remained prohibitively expensive for high-throughput studies. Here, we analyze simple measures for accelerating potential of mean force (PMF) calculations of membrane permeation, namely, (i) using smaller simulation systems, (ii) simulating multiple solutes per system, and (iii) using shorter cutoffs for the Lennard-Jones interactions. We find that PMFs for membrane permeation are remarkably robust against alterations of such parameters, suggesting that accurate PMF calculations are possible at strongly reduced computational cost. In addition, we evaluated the influence of the definition of the membrane center of mass (COM), used to define the transmembrane reaction coordinate. Membrane-COM definitions based on all lipid atoms lead to artifacts due to undulations and, consequently, to PMFs dependent on membrane size. In contrast, COM definitions based on a cylinder around the solute lead to size-independent PMFs, down to systems of only 16 lipids per monolayer. In summary, compared to popular setups that simulate a single solute in a membrane of 128 lipids with a Lennard-Jones cutoff of 1.2 nm, the measures applied here yield a speedup in sampling by factor of ˜40, without reducing the accuracy of the calculated PMF.

Utilising integrated urban water management to assess the viability of decentralised water solutions.

PubMed

Burn, Stewart; Maheepala, Shiroma; Sharma, Ashok

2012-01-01

Cities worldwide are challenged by a number of urban water issues associated with climate change, population growth and the associated water scarcity, wastewater flows and stormwater run-off. To address these problems decentralised solutions are increasingly being considered by water authorities, and integrated urban water management (IUWM) has emerged as a potential solution to most of these urban water challenges, and as the key to providing solutions incorporating decentralised concepts at a city wide scale. To incorporate decentralised options, there is a need to understand their performance and their impact on a city's total water cycle under alternative water and land management options. This includes changes to flow, nutrient and sediment regimes, energy use, greenhouse gas emissions, and the impacts on rivers, aquifers and estuaries. Application of the IUWM approach to large cities demands revisiting the fundamental role of water system design in sustainable city development. This paper uses the extended urban metabolism model (EUMM) to expand a logical definition for the aims of IUWM, and discusses the role of decentralised systems in IUWM and how IUWM principles can be incorporated into urban water planning.

Designing a flashcard with knowledge pills for learning to solve chemistry exercises

NASA Astrophysics Data System (ADS)

Cancela, Angeles; Sanchez, Angel; Maceiras, Rocio

2012-08-01

Nowadays, universities tend to promote more learner-centred learning, creating a more interactive and motivational environment for students and teachers. This paper describes an expanded framework to help chemical educators to construct a quiz for solution of chemical exercises in their courses. The novelty of this contribution is that the proposed tool combines a flashcards-based method with knowledge pills. The framework has three levels: definition of problem for a teacher; the quiz; use of the quiz for the student. The tool could provide predefined or automatically generated exercises of chemicals. Students could practise where and whenever they like via the Internet. Theirs answers would be registered automatically by the tool and if the students have doubts about any of the questions, they can see a knowledge pill with a teacher explanation about the solution of the exercise. Moreover, they would be able to check their scores from the tests. Once the flashcards were designed and produced, the opinions of other lecturers and students about them were considered. Both groups considered that the tool could be useful to improve the students' learning process. For future work, this design will be used with the students and its effectiveness will be analysed.

Didactical suggestion for a Dynamic Hybrid Intelligent e-Learning Environment (DHILE) applying the PENTHA ID Model

NASA Astrophysics Data System (ADS)

dall'Acqua, Luisa

2011-08-01

The teleology of our research is to propose a solution to the request of "innovative, creative teaching", proposing a methodology to educate creative Students in a society characterized by multiple reference points and hyper dynamic knowledge, continuously subject to reviews and discussions. We apply a multi-prospective Instructional Design Model (PENTHA ID Model), defined and developed by our research group, which adopts a hybrid pedagogical approach, consisting of elements of didactical connectivism intertwined with aspects of social constructivism and enactivism. The contribution proposes an e-course structure and approach, applying the theoretical design principles of the above mentioned ID Model, describing methods, techniques, technologies and assessment criteria for the definition of lesson modes in an e-course.

Gauge invariant gluon spin operator for spinless nonlinear wave solutions

NASA Astrophysics Data System (ADS)

Lee, Bum-Hoon; Kim, Youngman; Pak, D. G.; Tsukioka, Takuya; Zhang, P. M.

2017-04-01

We consider nonlinear wave type solutions with intrinsic mass scale parameter and zero spin in a pure SU(2) quantum chromodynamics (QCD). A new stationary solution which can be treated as a system of static Wu-Yang monopole dressed in off-diagonal gluon field is proposed. A remarkable feature of such a solution is that it possesses a finite energy density everywhere. All considered nonlinear wave type solutions have common features: presence of the mass scale parameter, nonvanishing projection of the color fields along the propagation direction and zero spin. The last property requires revision of the gauge invariant definition of the spin density operator which is supposed to produce spin one states for the massless vector gluon field. We construct a gauge invariant definition of the classical gluon spin density operator which is unique and Lorentz frame independent.

Middle infrared optoelectronic absorption systems for monitoring physiological glucose solutions

NASA Astrophysics Data System (ADS)

Martin, W. Blake

Tight monitoring of the glucose levels for diabetic individuals is essential to control long-term complications. A definitive diabetes management system has yet to be developed for the diabetic. This research investigates the application of middle infrared absorption frequencies for monitoring glucose levels in biological solutions. Three frequencies were identified using a Fourier transform infrared spectrometer and correlated to changes in glucose concentrations. The 1035 +/- 1 cm-1 frequency was determined to be the best representative frequency. Other biological molecules contributed no significant interference to monitoring glucose absorption. A second frequency at 1193 cm-1 was suggested as a representative background absorption frequency, which could be used for more accurate glucose absorption values. Next, a quantum cascade laser optoelectronic absorption system was designed and developed to monitor glucose. After careful alignment and design, the system was used to monitor physiological glucose concentrations. Correlation at 1036 cm-1 with glucose changes was comparable to the previous results. The use of the background absorption frequency was verified. This frequency essentially acts as a calibrating frequency to adjust in real-time to any changes in the background absorption that may alter the accuracy of the predicted glucose value. An evanescent wave cavity ring-down spectroscopy technique was explored to monitor molecules in a biological solution. Visible light at 425 nm was used to monitor hemoglobin in control urine samples. An adsorption isotherm for hemoglobin was detectable to limit of 5.8 nM. Evanescent wave cavity ring-down spectroscopy would be useful for a glucose solution. Given an equivalent system designed for the middle infrared, the molar extinction coefficient of glucose allows for a detectable limit of 45 mg/dl for a free-floating glucose solution, which is below normal physiological concentrations. The future use of a hydrophobic coating could limit the adsorption of glucose to the surface but still allow physiological monitoring. Three middle infrared optoelectronic absorption systems have been designed for monitoring glucose in a physiological solution. The systems are applicable for the monitoring of glucose. These systems may lead to a useful monitoring device for the diabetic so that the universal complications associated with the disease may be limited.

A general temporal data model and the structured population event history register

PubMed Central

Clark, Samuel J.

2010-01-01

At this time there are 37 demographic surveillance system sites active in sub-Saharan Africa, Asia and Central America, and this number is growing continuously. These sites and other longitudinal population and health research projects generate large quantities of complex temporal data in order to describe, explain and investigate the event histories of individuals and the populations they constitute. This article presents possible solutions to some of the key data management challenges associated with those data. The fundamental components of a temporal system are identified and both they and their relationships to each other are given simple, standardized definitions. Further, a metadata framework is proposed to endow this abstract generalization with specific meaning and to bind the definitions of the data to the data themselves. The result is a temporal data model that is generalized, conceptually tractable, and inherently contains a full description of the primary data it organizes. Individual databases utilizing this temporal data model can be customized to suit the needs of their operators without modifying the underlying design of the database or sacrificing the potential to transparently share compatible subsets of their data with other similar databases. A practical working relational database design based on this general temporal data model is presented and demonstrated. This work has arisen out of experience with demographic surveillance in the developing world, and although the challenges and their solutions are more general, the discussion is organized around applications in demographic surveillance. An appendix contains detailed examples and working prototype databases that implement the examples discussed in the text. PMID:20396614

Defining of the BDX930 Assembly Language

NASA Technical Reports Server (NTRS)

Boyer, R. S.; Moore, J. S.

1983-01-01

A definition of the BDX930 assembly language is presented. Various definition problems and suggested solutions are included. A class of defined recognizers based on boolean valued nowrecursive functions is employed in preprocessing.

Algorithm 937: MINRES-QLP for Symmetric and Hermitian Linear Equations and Least-Squares Problems.

PubMed

Choi, Sou-Cheng T; Saunders, Michael A

2014-02-01

We describe algorithm MINRES-QLP and its FORTRAN 90 implementation for solving symmetric or Hermitian linear systems or least-squares problems. If the system is singular, MINRES-QLP computes the unique minimum-length solution (also known as the pseudoinverse solution), which generally eludes MINRES. In all cases, it overcomes a potential instability in the original MINRES algorithm. A positive-definite pre-conditioner may be supplied. Our FORTRAN 90 implementation illustrates a design pattern that allows users to make problem data known to the solver but hidden and secure from other program units. In particular, we circumvent the need for reverse communication. Example test programs input and solve real or complex problems specified in Matrix Market format. While we focus here on a FORTRAN 90 implementation, we also provide and maintain MATLAB versions of MINRES and MINRES-QLP.

Using a Pareto-optimal solution set to characterize trade-offs between a broad range of values and preferences in climate risk management

NASA Astrophysics Data System (ADS)

Garner, Gregory; Reed, Patrick; Keller, Klaus

2015-04-01

Integrated assessment models (IAMs) are often used to inform the design of climate risk management strategies. Previous IAM studies have broken important new ground on analyzing the effects of parametric uncertainties, but they are often silent on the implications of uncertainties regarding the problem formulation. Here we use the Dynamic Integrated model of Climate and the Economy (DICE) to analyze the effects of uncertainty surrounding the definition of the objective(s). The standard DICE model adopts a single objective to maximize a weighted sum of utilities of per-capita consumption. Decision makers, however, are often concerned with a broader range of values and preferences that may be poorly captured by this a priori definition of utility. We reformulate the problem by introducing three additional objectives that represent values such as (i) reliably limiting global average warming to two degrees Celsius and minimizing (ii) the costs of abatement and (iii) the climate change damages. We use advanced multi-objective optimization methods to derive a set of Pareto-optimal solutions over which decision makers can trade-off and assess performance criteria a posteriori. We illustrate the potential for myopia in the traditional problem formulation and discuss the capability of this multiobjective formulation to provide decision support.

ICEG2D (v2.0) - An Integrated Software Package for Automated Prediction of Flow Fields for Single-Element Airfoils With Ice Accretion

NASA Technical Reports Server (NTRS)

Thompson David S.; Soni, Bharat K.

2001-01-01

An integrated geometry/grid/simulation software package, ICEG2D, is being developed to automate computational fluid dynamics (CFD) simulations for single- and multi-element airfoils with ice accretions. The current version, ICEG213 (v2.0), was designed to automatically perform four primary functions: (1) generate a grid-ready surface definition based on the geometrical characteristics of the iced airfoil surface, (2) generate high-quality structured and generalized grids starting from a defined surface definition, (3) generate the input and restart files needed to run the structured grid CFD solver NPARC or the generalized grid CFD solver HYBFL2D, and (4) using the flow solutions, generate solution-adaptive grids. ICEG2D (v2.0) can be operated in either a batch mode using a script file or in an interactive mode by entering directives from a command line within a Unix shell. This report summarizes activities completed in the first two years of a three-year research and development program to address automation issues related to CFD simulations for airfoils with ice accretions. As well as describing the technology employed in the software, this document serves as a users manual providing installation and operating instructions. An evaluation of the software is also presented.

Diagnostic depressive symptoms of the mixed bipolar episode.

PubMed

Cassidy, F; Ahearn, E; Murry, E; Forest, K; Carroll, B J

2000-03-01

There is not yet consensus on the best diagnostic definition of mixed bipolar episodes. Many have suggested the DSM-III-R/-IV definition is too rigid. We propose alternative criteria using data from a large patient cohort. We evaluated 237 manic in-patients using DSM-III-R criteria and the Scale for Manic States (SMS). A bimodally distributed factor of dysphoric mood has been reported from the SMS data. We used both the factor and the DSM-III-R classifications to identify candidate depressive symptoms and then developed three candidate depressive symptom sets. Using ROC analysis we determined the optimal threshold number of symptoms in each set and compared the three ROC solutions. The optimal solution was tested against the DSM-III-R classification for crossvalidation. The optimal ROC solution was a set, derived from both the DSM-III-R and the SMS, and the optimal threshold for diagnosis was two or more symptoms. Applying this set iteratively to the DSM-III-R classification produced the identical ROC solution. The prevalence of mixed episodes in the cohort was 13.9% by DSM-III-R, 20.2% by the dysphoria factor and 27.4% by the new ROC solution. A diagnostic set of six dysphoric symptoms (depressed mood, anhedonia, guilt, suicide, fatigue and anxiety), with a threshold of two symptoms, is proposed for a mixed episode. This new definition has a foundation in clinical data, in the proved diagnostic performance of the qualifying symptoms, and in ROC validation against two previous definitions that each have face validity.

Automatic building information model query generation

DOE PAGES

Jiang, Yufei; Yu, Nan; Ming, Jiang; ...

2015-12-01

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Automatic building information model query generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Yufei; Yu, Nan; Ming, Jiang

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approachmore » to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.« less

Vers l'elimination des dessins d'ingenierie des processus de modification d'ingenierie en aeronautique

NASA Astrophysics Data System (ADS)

Quintana, Virgilio

For many years, 3D models and 2D drawings have been the main basic elements that together form and carry a product's definition throughout its lifecycle. With the advent of the Digital Product Definition trend, the Aerospace and Automotive industries have been very interested in adopting a Model-based Definition (MBD) approach that promises reduced time-to-market and improved product quality. Its main purpose is to improve and accelerate the design, manufacturing and inspection processes by integrating drawing annotations directly onto a 3D model, thereby minimizing the need to generate engineering drawings. Even though CAD tools and international standards support the MBD concept, its implementation throughout the whole product lifecycle has not yet been fully adopted; traditional engineering drawings still play an essential part in the capture and distribution of non-geometric data (tolerances, notes, etc.), in the long-term storage of product definitions, as well as in the management of engineering changes. This is especially so within the Engineering Change Management (ECM) process, which involves the study, review, annotation, validation, approval and release of engineering drawings. The exploration of alternatives to reengineer the ECM process in the absence of drawings is therefore a necessary step before the MBD approach can be broadly accepted. The objective of this research project was to propose a solution to conduct the ECM process in a drawing-less environment and to quantify its potential gains. Two Canadian aerospace companies participated in this project. First, the main barriers to be overcome in order to fully implement the MBD initiative were identified. Our observations were based on forty-one interviews conducted within the Engineering, Drafting, Configuration Management, Airworthiness, Certification, Manufacturing, Inspection and Knowledge Management departments from the two participating companies. The results indicated that there is a need to define how the Product Definition will be carried in this drawing-less environment while supporting all of the downstream users' specific requirements. Next, a solution to conduct an MBD-driven Engineering Change Management Process (ECM) was developed and evaluated based on the process requirements from both companies. The solution consists of the definition of a dataset composed of the MBD model (generated by the CAD system) and a lightweight distribution file (generated and exploited by the visualization application). The ECM process was then reengineered to support its execution when working with MBD datasets. Finally, the gains from administering the MBD-driven ECM process were determined using empirical and experimental data within a discrete-event simulation approach. Based on a case study conducted in a Canadian aerospace company, our results show that a reduction of about 11% can be achieved in both the average overall processing time and in the average cost.

ORACLS: A system for linear-quadratic-Gaussian control law design

NASA Technical Reports Server (NTRS)

Armstrong, E. S.

1978-01-01

A modern control theory design package (ORACLS) for constructing controllers and optimal filters for systems modeled by linear time-invariant differential or difference equations is described. Numerical linear-algebra procedures are used to implement the linear-quadratic-Gaussian (LQG) methodology of modern control theory. Algorithms are included for computing eigensystems of real matrices, the relative stability of a matrix, factored forms for nonnegative definite matrices, the solutions and least squares approximations to the solutions of certain linear matrix algebraic equations, the controllability properties of a linear time-invariant system, and the steady state covariance matrix of an open-loop stable system forced by white noise. Subroutines are provided for solving both the continuous and discrete optimal linear regulator problems with noise free measurements and the sampled-data optimal linear regulator problem. For measurement noise, duality theory and the optimal regulator algorithms are used to solve the continuous and discrete Kalman-Bucy filter problems. Subroutines are also included which give control laws causing the output of a system to track the output of a prescribed model.

Comparative study of solar optics for paraboloidal concentrators

NASA Technical Reports Server (NTRS)

Wen, L.; Poon, P.; Carley, W.; Huang, L.

1979-01-01

Different analytical methods for computing the flux distribution on the focal plane of a paraboloidal solar concentrator are reviewed. An analytical solution in algebraic form is also derived for an idealized model. The effects resulting from using different assumptions in the definition of optical parameters used in these methodologies are compared and discussed in detail. These parameters include solar irradiance distribution (limb darkening and circumsolar), reflector surface specular spreading, surface slope error, and concentrator pointing inaccuracy. The type of computational method selected for use depends on the maturity of the design and the data available at the time the analysis is made.

EM Modelling of RF Propagation Through Plasma Plumes

NASA Astrophysics Data System (ADS)

Pandolfo, L.; Bandinelli, M.; Araque Quijano, J. L.; Vecchi, G.; Pawlak, H.; Marliani, F.

2012-05-01

Electric propulsion is a commercially attractive solution for attitude and position control of geostationary satellites. Hall-effect ion thrusters generate a localized plasma flow in the surrounding of the satellite, whose impact on the communication system needs to be qualitatively and quantitatively assessed. An electromagnetic modelling tool has been developed and integrated into the Antenna Design Framework- ElectroMagnetic Satellite (ADF-EMS). The system is able to guide the user from the plume definition phases through plume installation and simulation. A validation activity has been carried out and the system has been applied to the plume modulation analysis of SGEO/Hispasat mission.

An algebraic equation solution process formulated in anticipation of banded linear equations.

DOT National Transportation Integrated Search

1971-01-01

A general method for the solution of large, sparsely banded, positive-definite, coefficient matrices is presented. The goal in developing the method was to produce an efficient and reliable solution process and to provide the user-programmer with a p...

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... unreacted acid from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric... recovery or acid regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means...

Revisiting software specification and design for large astronomy projects

NASA Astrophysics Data System (ADS)

Wiant, Scott; Berukoff, Steven

2016-07-01

The separation of science and engineering in the delivery of software systems overlooks the true nature of the problem being solved and the organization that will solve it. Use of a systems engineering approach to managing the requirements flow between these two groups as between a customer and contractor has been used with varying degrees of success by well-known entities such as the U.S. Department of Defense. However, treating science as the customer and engineering as the contractor fosters unfavorable consequences that can be avoided and opportunities that are missed. For example, the "problem" being solved is only partially specified through the requirements generation process since it focuses on detailed specification guiding the parties to a technical solution. Equally important is the portion of the problem that will be solved through the definition of processes and staff interacting through them. This interchange between people and processes is often underrepresented and under appreciated. By concentrating on the full problem and collaborating on a strategy for its solution a science-implementing organization can realize the benefits of driving towards common goals (not just requirements) and a cohesive solution to the entire problem. The initial phase of any project when well executed is often the most difficult yet most critical and thus it is essential to employ a methodology that reinforces collaboration and leverages the full suite of capabilities within the team. This paper describes an integrated approach to specifying the needs induced by a problem and the design of its solution.

Structural Sustainability - Heuristic Approach

NASA Astrophysics Data System (ADS)

Rostański, Krzysztof

2017-10-01

Nowadays, we are faced with a challenge of having to join building structures with elements of nature, which seems to be the paradigm of modern planning and design. The questions arise, however, with reference to the following categories: the leading idea, the relation between elements of nature and buildings, the features of a structure combining such elements and, finally, our perception of this structure. If we consider both the overwhelming globalization and our attempts to preserve local values, the only reasonable solution is to develop naturalistic greenery. It can add its uniqueness to any building and to any developed area. Our holistic model, presented in this paper, contains the above mentioned categories within the scope of naturalism. The model is divided into principles, actions related, and possible effects to be obtained. It provides a useful tool for determining the ways and priorities of our design. Although it is not possible to consider all possible actions and solutions in order to support sustainability in any particular design, we can choose, however, a proper mode for our design according to the local conditions by turning to the heuristic method, which helps to choose priorities and targets. Our approach is an attempt to follow the ways of nature as in the natural environment it is optimal solutions that appear and survive, idealism being the domain of mankind only. We try to describe various natural processes in a manner comprehensible to us, which is always a generalization. Such definitions, however, called artificial by naturalists, are presented as art or the current state of knowledge by artists and engineers. Reality, in fact, is always more complicated than its definitions. The heuristic method demonstrates the way how to optimize our design. It requires that all possible information about the local environment should be gathered, as the more is known, the fewer mistakes are made. Following the unquestionable principles, we can choose the related actions. As there is no need and, probably, no possibility to implement all of them in a particular case, we must find our own way. The holistic model shows the effects of our actions and thus enabling us to compare them with our own targets. Following the method will help us to make conscious decisions, but not to implement all possible tasks in our program. In nature, every species has its own capabilities to adjust and creates its habitat accordingly, disregarding the universal idea of taking all possible benefits offered by nature. In order to follow the principles of sustainability we have to act similarly. When designing we should rather try to approach perfection than create ideal solutions, because what is perceived as ideal at the present state of knowledge, will always be imperfect. The paper describes three case studies of the heuristic approach in landscape design. They are all located in Silesia, Poland. The first is GPP Business Park in Katowice, whose building and its surrounding with the greenery designed according to the discussed method received the Outstanding BREEAM Certification. The second is the recreation area of Rybaczowka near Strzelce Opolskie, whose redeveloping design won the highest rating in a government competition for the ecological fund investments. The third is Row Rudzki - an ecological area in the center of an industrial city.

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

PEP solar array definition study

NASA Technical Reports Server (NTRS)

1979-01-01

The conceptual design of a large, flexible, lightweight solar array is presented focusing on a solar array overview assessment, solar array blanket definition, structural-mechanical systems definition, and launch/reentry blanket protection features. The overview assessment includes a requirements and constraints review, the thermal environment assessment on the design selection, an evaluation of blanket integration sequence, a conceptual blanket/harness design, and a hot spot analysis considering the effects of shadowing and cell failures on overall array reliability. The solar array blanket definition includes the substrate design, hinge designs and blanket/harness flexibility assessment. The structural/mechanical systems definition includes an overall loads and deflection assessment, a frequency analysis of the deployed assembly, a components weights estimate, design of the blanket housing and tensioning mechanism. The launch/reentry blanket protection task includes assessment of solar cell/cover glass cushioning concepts during ascent and reentry flight condition.

40 CFR 63.11398 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... acrylonitrile units: acrylic fiber or modacrylic fiber. Acrylonitrile solution polymerization means a process where acrylonitrile and comonomers are dissolved in a solvent to form a polymer solution (typically... resulting reactor polymer solution (spin dope) is filtered and pumped directly to the fiber spinning process...

40 CFR 63.11398 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... acrylonitrile units: acrylic fiber or modacrylic fiber. Acrylonitrile solution polymerization means a process where acrylonitrile and comonomers are dissolved in a solvent to form a polymer solution (typically... resulting reactor polymer solution (spin dope) is filtered and pumped directly to the fiber spinning process...

System analysis of a piston steam engine employing the uniflow principle, a study in optimized performance

NASA Technical Reports Server (NTRS)

Peoples, J. A.

1975-01-01

Results are reported which were obtained from a mathematical model of a generalized piston steam engine configuration employing the uniflow principal. The model accounted for the effects of clearance volume, compression work, and release volume. A simple solution is presented which characterizes optimum performance of the steam engine, based on miles per gallon. Development of the mathematical model is presented. The relationship between efficiency and miles per gallon is developed. An approach to steam car analysis and design is presented which has purpose rather than lucky hopefulness. A practical engine design is proposed which correlates to the definition of the type engine used. This engine integrates several system components into the engine structure. All conclusions relate to the classical Rankine Cycle.

78 FR 9815 - Final Priorities, Requirements, Definitions, and Selection Criteria-Supporting Effective Educator...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... that can demonstrate impact through other methodological approaches such as a quasi-experimental design... definition of ``relevant outcome.'' Lastly, quasi-experimental designs are already included in the definition... paragraph (b) of this definition, provided they are rigorous and comparable across schools. (b) For non...

Regression analysis as a design optimization tool

NASA Technical Reports Server (NTRS)

Perley, R.

1984-01-01

The optimization concepts are described in relation to an overall design process as opposed to a detailed, part-design process where the requirements are firmly stated, the optimization criteria are well established, and a design is known to be feasible. The overall design process starts with the stated requirements. Some of the design criteria are derived directly from the requirements, but others are affected by the design concept. It is these design criteria that define the performance index, or objective function, that is to be minimized within some constraints. In general, there will be multiple objectives, some mutually exclusive, with no clear statement of their relative importance. The optimization loop that is given adjusts the design variables and analyzes the resulting design, in an iterative fashion, until the objective function is minimized within the constraints. This provides a solution, but it is only the beginning. In effect, the problem definition evolves as information is derived from the results. It becomes a learning process as we determine what the physics of the system can deliver in relation to the desirable system characteristics. As with any learning process, an interactive capability is a real attriubute for investigating the many alternatives that will be suggested as learning progresses.

Decision and function problems based on boson sampling

NASA Astrophysics Data System (ADS)

Nikolopoulos, Georgios M.; Brougham, Thomas

2016-07-01

Boson sampling is a mathematical problem that is strongly believed to be intractable for classical computers, whereas passive linear interferometers can produce samples efficiently. So far, the problem remains a computational curiosity, and the possible usefulness of boson-sampling devices is mainly limited to the proof of quantum supremacy. The purpose of this work is to investigate whether boson sampling can be used as a resource of decision and function problems that are computationally hard, and may thus have cryptographic applications. After the definition of a rather general theoretical framework for the design of such problems, we discuss their solution by means of a brute-force numerical approach, as well as by means of nonboson samplers. Moreover, we estimate the sample sizes required for their solution by passive linear interferometers, and it is shown that they are independent of the size of the Hilbert space.

Algorithm 937: MINRES-QLP for Symmetric and Hermitian Linear Equations and Least-Squares Problems

PubMed Central

Choi, Sou-Cheng T.; Saunders, Michael A.

2014-01-01

We describe algorithm MINRES-QLP and its FORTRAN 90 implementation for solving symmetric or Hermitian linear systems or least-squares problems. If the system is singular, MINRES-QLP computes the unique minimum-length solution (also known as the pseudoinverse solution), which generally eludes MINRES. In all cases, it overcomes a potential instability in the original MINRES algorithm. A positive-definite pre-conditioner may be supplied. Our FORTRAN 90 implementation illustrates a design pattern that allows users to make problem data known to the solver but hidden and secure from other program units. In particular, we circumvent the need for reverse communication. Example test programs input and solve real or complex problems specified in Matrix Market format. While we focus here on a FORTRAN 90 implementation, we also provide and maintain MATLAB versions of MINRES and MINRES-QLP. PMID:25328255

Rapid Airplane Parametric Input Design(RAPID)

NASA Technical Reports Server (NTRS)

Smith, Robert E.; Bloor, Malcolm I. G.; Wilson, Michael J.; Thomas, Almuttil M.

2004-01-01

An efficient methodology is presented for defining a class of airplane configurations. Inclusive in this definition are surface grids, volume grids, and grid sensitivity. A small set of design parameters and grid control parameters govern the process. The general airplane configuration has wing, fuselage, vertical tail, horizontal tail, and canard components. The wing, tail, and canard components are manifested by solving a fourth-order partial differential equation subject to Dirichlet and Neumann boundary conditions. The design variables are incorporated into the boundary conditions, and the solution is expressed as a Fourier series. The fuselage has circular cross section, and the radius is an algebraic function of four design parameters and an independent computational variable. Volume grids are obtained through an application of the Control Point Form method. Grid sensitivity is obtained by applying the automatic differentiation precompiler ADIFOR to software for the grid generation. The computed surface grids, volume grids, and sensitivity derivatives are suitable for a wide range of Computational Fluid Dynamics simulation and configuration optimizations.

Repair Concepts as Design Constraints of a Stiffened Composite PRSEUS Panel

NASA Technical Reports Server (NTRS)

Przekop, Adam

2012-01-01

A design and analysis of a repair concept applicable to a stiffened thin-skin composite panel based on the Pultruded Rod Stitched Efficient Unitized Structure is presented. The concept is a bolted repair using metal components, so that it can easily be applied in the operational environment. The damage scenario considered is a midbay-to-midbay saw-cut with a severed stiffener, flange and skin. In a previous study several repair configurations were explored and their feasibility confirmed but refinement was needed. The present study revisits the problem under recently revised design requirements and broadens the suite of loading conditions considered. The repair assembly design is based on the critical tension loading condition and subsequently its robustness is verified for a pressure loading case. High fidelity modeling techniques such as mesh-independent definition of compliant fasteners, elastic-plastic material properties for metal parts and geometrically nonlinear solutions are utilized in the finite element analysis. The best repair design is introduced, its analysis results are presented and factors influencing the design are assessed and discussed.

Complex multidisciplinary systems decomposition for aerospace vehicle conceptual design and technology acquisition

NASA Astrophysics Data System (ADS)

Omoragbon, Amen

Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States' economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem is related to the differences between technology acquisition assessments and aerospace vehicle conceptual design. Acquisition assessments evaluate broad sets of alternatives with mostly qualitative techniques, while conceptual design tools evaluate narrow set of alternatives with multidisciplinary tools. In order for these two fields to communicate effectively, a common platform for both concerns is desired. This research is an original contribution to a three-part solution to this problem. It discusses the decomposition step of an innovation technology and sizing tool generation framework. It identifies complex multidisciplinary system definitions as a bridge between acquisition and conceptual design. It establishes complex multidisciplinary building blocks that can be used to build synthesis systems as well as technology portfolios. It also describes a Graphical User Interface Designed to aid in decomposition process. Finally, it demonstrates an application of the methodology to a relevant acquisition and conceptual design problem posed by the US Air Force.

Command and Control in a Complex World

DTIC Science & Technology

2012-05-22

definition of command and control does not adequately address changes introduced through technology trends, our understanding of the global operating...processes. The current joint definition of command and control does not adequately address changes introduced through technology trends, our...the problem is actually solved.  There are no  definitive ,  objective solutions to wicked problems.  For a complete  definition  of wicked problems, see

SemanticSCo: A platform to support the semantic composition of services for gene expression analysis.

PubMed

Guardia, Gabriela D A; Ferreira Pires, Luís; da Silva, Eduardo G; de Farias, Cléver R G

2017-02-01

Gene expression studies often require the combined use of a number of analysis tools. However, manual integration of analysis tools can be cumbersome and error prone. To support a higher level of automation in the integration process, efforts have been made in the biomedical domain towards the development of semantic web services and supporting composition environments. Yet, most environments consider only the execution of simple service behaviours and requires users to focus on technical details of the composition process. We propose a novel approach to the semantic composition of gene expression analysis services that addresses the shortcomings of the existing solutions. Our approach includes an architecture designed to support the service composition process for gene expression analysis, and a flexible strategy for the (semi) automatic composition of semantic web services. Finally, we implement a supporting platform called SemanticSCo to realize the proposed composition approach and demonstrate its functionality by successfully reproducing a microarray study documented in the literature. The SemanticSCo platform provides support for the composition of RESTful web services semantically annotated using SAWSDL. Our platform also supports the definition of constraints/conditions regarding the order in which service operations should be invoked, thus enabling the definition of complex service behaviours. Our proposed solution for semantic web service composition takes into account the requirements of different stakeholders and addresses all phases of the service composition process. It also provides support for the definition of analysis workflows at a high-level of abstraction, thus enabling users to focus on biological research issues rather than on the technical details of the composition process. The SemanticSCo source code is available at https://github.com/usplssb/SemanticSCo. Copyright © 2017 Elsevier Inc. All rights reserved.

40 CFR 420.101 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Cold Forming Subcategory § 420.101 Specialized definitions. (a) The term recirculation means those cold rolling operations which include recirculation of rolling solutions at all mill stands. (b) The term combination means those cold rolling...

40 CFR 420.101 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Cold Forming Subcategory § 420.101 Specialized definitions. (a) The term recirculation means those cold rolling operations which include recirculation of rolling solutions at all mill stands. (b) The term combination means those cold rolling...

40 CFR 420.101 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Cold Forming Subcategory § 420.101 Specialized definitions. (a) The term recirculation means those cold rolling operations which include recirculation of rolling solutions at all mill stands. (b) The term combination means those cold rolling...

40 CFR 420.101 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Cold Forming Subcategory § 420.101 Specialized definitions. (a) The term recirculation means those cold rolling operations which include recirculation of rolling solutions at all mill stands. (b) The term combination means those cold rolling...

48 CFR 209.571-1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Acquisition Program. “Pre-Major Defense Acquisition Program” means a program that is in the Materiel Solution...) Directing other contractors' (other than subcontractors) operations; (I) Developing test requirements and evaluating test data; (J) Developing work statements (but see paragraph (ii)(B) of this definition). (ii...

Some problems concerned with the geodetic use of high precision altimeter data

NASA Technical Reports Server (NTRS)

Lelgemann, D.

1976-01-01

The definition of the geoid in view of different height systems is discussed. A definition is suggested which makes it possible to take into account the influence of the unknown corrections to the various height systems on the solution of Stokes' problem. A solution to Stokes' problem with an accuracy of 10 cm is derived which allows the inclusion of the results of satellite geodesy. In addition equations are developed for the determination of spherical harmonies using altimeter measurements. The influence of the ellipticity of the reference surface is considered.

Token-based information security for commercial and federal information networks

NASA Astrophysics Data System (ADS)

Rohland, William S.

1996-03-01

The planning of cryptographic solutions for messaging and electronic commerce applications in the United States during the past few years has been motivated by a high level of interest in the technology on the part of potential users. It has been marked by a high level of controversy over algorithms, patent rights and escrow policy. The diverse needs of the government and commercial sectors have led to mutually exclusive solutions based on different algorithms and policy; this phenomenon is fairly unique to the United States. Because of the strong requirement to preserve the differences that make these solutions unique for the two environments, the near-term evolution of a single standard appears unlikely. Furthermore, the need on the part of some government agencies and some commercial establishments exists to operate in both environments. This paper deals with the technical definition and design approach to a dual-use cryptographic device and the migration paths to the dual-use device from both environments. Such a device is further considered as a component of a secure cryptographic translation facility.

HAL/SM system functional design specification. [systems analysis and design analysis of central processing units

NASA Technical Reports Server (NTRS)

Ross, C.; Williams, G. P. W., Jr.

1975-01-01

The functional design of a preprocessor, and subsystems is described. A structure chart and a data flow diagram are included for each subsystem. Also a group of intermodule interface definitions (one definition per module) is included immediately following the structure chart and data flow for a particular subsystem. Each of these intermodule interface definitions consists of the identification of the module, the function the module is to perform, the identification and definition of parameter interfaces to the module, and any design notes associated with the module. Also described are compilers and computer libraries.

78 FR 18681 - Final Priorities, Requirements, Definitions, and Selection Criteria-Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

...The Assistant Deputy Secretary for Innovation and Improvement announces priorities, requirements, definitions, and selection criteria under the Investing in Innovation Fund (i3). The Assistant Deputy Secretary may use one or more of these priorities, requirements, definitions, and selection criteria for competitions in fiscal year (FY) 2013 and later years. We clarify and redesign key aspects of the program by incorporating lessons learned from past i3 competitions. Specifically, we intend to improve the i3 program to better achieve its purposes and goal by making changes that will result in accelerating the identification of promising solutions to pressing challenges in K-12 public education, supporting the evaluation of the efficacy of such solutions, and developing new approaches to scaling effective practices to serve more students.

Development of Lightweight Material Composites to Insulate Cryogenic Tanks for 30-Day Storage in Outer Space

NASA Technical Reports Server (NTRS)

Krause, D. R.

1972-01-01

A conceptual design was developed for an MLI system which will meet the design constraints of an ILRV used for 7- to 30-day missions. The ten tasks are briefly described: (1) material survey and procurement, material property tests, and selection of composites to be considered; (2) definition of environmental parameters and tooling requirements, and thermal and structural design verification test definition; (3) definition of tanks and associated hardware to be used, and definition of MLI concepts to be considered; (4) thermal analyses, including purge, evacuation, and reentry repressurization analyses; (5) structural analyses (6) thermal degradation tests of composite and structural tests of fastener; (7) selection of MLI materials and system; (8) definition of a conceptual MLI system design; (9) evaluation of nondestructive inspection techniques and definition of procedures for repair of damaged areas; and (10) preparation of preliminary specifications.

A Structured Approach to Teaching Applied Problem Solving through Technology Assessment.

ERIC Educational Resources Information Center

Fischbach, Fritz A.; Sell, Nancy J.

1986-01-01

Describes an approach to problem solving based on real-world problems. Discusses problem analysis and definitions, preparation of briefing documents, solution finding techniques (brainstorming and synectics), solution evaluation and judgment, and implementation. (JM)

Natural Hazard Problem and Solution Definition in the News Media: the Case of Tropical Storm Allison

NASA Astrophysics Data System (ADS)

Lindquist, Eric; Mosher-Howe, Katrina

2010-05-01

Focusing events such as natural or technological disasters can have significant impacts on public policy and planning in both the near and long term. These impacts can manifest at different temporal scales ranging from the period of immediate attention and disaster relief through the period of recovery and reconstruction and beyond. These impacts and associated decisions can be studied in retrospect and understood as not only short-term reactions, but as long-term components of subsequent natural hazard planning and public policy. By studying in detail how an event was defined, and the policy and planning alternatives that were raised or recommended in response to a disaster event, we can better understand the role that disaster-related focusing events play in the long-term evolution of a community's public policy, infrastructural planning efforts, and responses to natural disasters. This paper will use a focusing event framework to explore the local and regional policy impacts over time of a major urban flood in Houston, Texas, Tropical Storm Allison. Tropical Storm Allison (TSA), dropped 36 inches of rain on Houston over a period of four days in early June 2001, and was responsible for 22 deaths, 70,000 flood damaged homes, and 5 billion in damage to the region. The primary data source for this effort is a database of 500 articles from the major regional newspaper, the Houston Chronicle, over the period of 2001 through 2008. These articles were coded for multiple variables, including, cause, effect and impact (financial and social), blame, problem and solution definition and solution acceptance). This paper focuses primarily on the measures of problem definition (how was TSA, as an event, defined in the media, for example, as an act of God, or as a result of poor planning or decision making, etc), and on solution definition (what solutions were proposed to mitigate or adapt to future storms of this magnitude, how were they linked to the definition of the problem, and what was the perceived acceptability of such solutions among divers stakeholders). As such, this paper will contribute to our efforts to further link the social and policy sciences theory and methods with natural hazards research.

A customisable framework for the assessment of therapies in the solution of therapy decision tasks.

PubMed

Manjarrés Riesco, A; Martínez Tomás, R; Mira Mira, J

2000-01-01

In current medical research, a growing interest can be observed in the definition of a global therapy-evaluation framework which integrates considerations such as patients preferences and quality-of-life results. In this article, we propose the use of the research results in this domain as a source of knowledge in the design of support systems for therapy decision analysis, in particular with a view to application in oncology. We discuss the incorporation of these considerations in the definition of the therapy-assessment methods involved in the solution of a generic therapy decision task, described in the context of AI software development methodologies such as CommonKADS. The goal of the therapy decision task is to identify the ideal therapy, for a given patient, in accordance with a set of objectives of a diverse nature. The assessment methods applied are based either on data obtained from statistics or on the specific idiosyncrasies of each patient, as identified from their responses to a suite of psychological tests. In the analysis of the therapy decision task we emphasise the importance, from a methodological perspective, of using a rigorous approach to the modelling of domain ontologies and domain-specific data. To this aim we make extensive use of the semi-formal object oriented analysis notation UML to describe the domain level.

40 CFR 60.41b - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... oven gas, and coal-water mixtures, are also included in this definition for the purposes of this.... Conventional technology means wet flue gas desulfurization (FGD) technology, dry FGD technology, atmospheric... with an alkaline reagent and water, whether introduced separately or as a premixed slurry or solution...

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Acid Pickling Subcategory § 420.91 Specialized definitions. (a) The term sulfuric acid pickling means those operations in which steel products are immersed... steel products are immersed in hydrochloric acid solutions to chemically remove oxides and scale, and...

Recursive partitioned inversion of large (1500 x 1500) symmetric matrices

NASA Technical Reports Server (NTRS)

Putney, B. H.; Brownd, J. E.; Gomez, R. A.

1976-01-01

A recursive algorithm was designed to invert large, dense, symmetric, positive definite matrices using small amounts of computer core, i.e., a small fraction of the core needed to store the complete matrix. The described algorithm is a generalized Gaussian elimination technique. Other algorithms are also discussed for the Cholesky decomposition and step inversion techniques. The purpose of the inversion algorithm is to solve large linear systems of normal equations generated by working geodetic problems. The algorithm was incorporated into a computer program called SOLVE. In the past the SOLVE program has been used in obtaining solutions published as the Goddard earth models.

Multi level optimization of burnable poison utilization for advanced PWR fuel management

NASA Astrophysics Data System (ADS)

Yilmaz, Serkan

The objective of this study was to develop an unique methodology and a practical tool for designing burnable poison (BP) pattern for a given PWR core. Two techniques were studied in developing this tool. First, the deterministic technique called Modified Power Shape Forced Diffusion (MPSFD) method followed by a fine tuning algorithm, based on some heuristic rules, was developed to achieve this goal. Second, an efficient and a practical genetic algorithm (GA) tool was developed and applied successfully to Burnable Poisons (BPs) placement optimization problem for a reference Three Mile Island-1 (TMI-1) core. This thesis presents the step by step progress in developing such a tool. The developed deterministic method appeared to perform as expected. The GA technique produced excellent BP designs. It was discovered that the Beginning of Cycle (BOC) Kinf of a BP fuel assembly (FA) design is a good filter to eliminate invalid BP designs created during the optimization process. By eliminating all BP designs having BOC Kinf above a set limit, the computational time was greatly reduced since the evaluation process with reactor physics calculations for an invalid solution is canceled. Moreover, the GA was applied to develop the BP loading pattern to minimize the total Gadolinium (Gd) amount in the core together with the residual binding at End-of-Cycle (EOC) and to keep the maximum peak pin power during core depletion and Soluble boron concentration at BOC both less than their limit values. The number of UO2/Gd2O3 pins and Gd 2O3 concentrations for each fresh fuel location in the core are the decision variables and the total amount of the Gd in the core and maximum peak pin power during core depletion are in the fitness functions. The use of different fitness function definition and forcing the solution movement towards to desired region in the solution space accelerated the GA runs. Special emphasize is given to minimizing the residual binding to increase core lifetime as well as minimizing the total Gd amount in the core. The GA code developed many good solutions that satisfy all of the design constraints. For these solutions, the EOC soluble boron concentration changes from 68.9 to 97.2 ppm. It is important to note that the difference of 28.3 ppm between the best and the worst solution in the good solutions region represent the potential of 12.5 Effective-Full-Power-Day (EPFD) savings in cycle length. As a comparison, the best BP loading design has 97.2 ppm soluble boron concentration at EOC while the BP loading with available vendors' U/Gd FA designs has 94.4 ppm SOB at EOC. It was estimated that the difference of 2.8 ppm reflected the potential savings of 1.25 EFPD in cycle length. Moreover, the total Gd amount was reduced by 6.89% in mass that provided extra savings in fuel cost compared to the BP loading pattern with available vendor's U/Gd FA designs. (Abstract shortened by UMI.)

Fast time- and frequency-domain finite-element methods for electromagnetic analysis

NASA Astrophysics Data System (ADS)

Lee, Woochan

Fast electromagnetic analysis in time and frequency domain is of critical importance to the design of integrated circuits (IC) and other advanced engineering products and systems. Many IC structures constitute a very large scale problem in modeling and simulation, the size of which also continuously grows with the advancement of the processing technology. This results in numerical problems beyond the reach of existing most powerful computational resources. Different from many other engineering problems, the structure of most ICs is special in the sense that its geometry is of Manhattan type and its dielectrics are layered. Hence, it is important to develop structure-aware algorithms that take advantage of the structure specialties to speed up the computation. In addition, among existing time-domain methods, explicit methods can avoid solving a matrix equation. However, their time step is traditionally restricted by the space step for ensuring the stability of a time-domain simulation. Therefore, making explicit time-domain methods unconditionally stable is important to accelerate the computation. In addition to time-domain methods, frequency-domain methods have suffered from an indefinite system that makes an iterative solution difficult to converge fast. The first contribution of this work is a fast time-domain finite-element algorithm for the analysis and design of very large-scale on-chip circuits. The structure specialty of on-chip circuits such as Manhattan geometry and layered permittivity is preserved in the proposed algorithm. As a result, the large-scale matrix solution encountered in the 3-D circuit analysis is turned into a simple scaling of the solution of a small 1-D matrix, which can be obtained in linear (optimal) complexity with negligible cost. Furthermore, the time step size is not sacrificed, and the total number of time steps to be simulated is also significantly reduced, thus achieving a total cost reduction in CPU time. The second contribution is a new method for making an explicit time-domain finite-element method (TDFEM) unconditionally stable for general electromagnetic analysis. In this method, for a given time step, we find the unstable modes that are the root cause of instability, and deduct them directly from the system matrix resulting from a TDFEM based analysis. As a result, an explicit TDFEM simulation is made stable for an arbitrarily large time step irrespective of the space step. The third contribution is a new method for full-wave applications from low to very high frequencies in a TDFEM based on matrix exponential. In this method, we directly deduct the eigenmodes having large eigenvalues from the system matrix, thus achieving a significantly increased time step in the matrix exponential based TDFEM. The fourth contribution is a new method for transforming the indefinite system matrix of a frequency-domain FEM to a symmetric positive definite one. We deduct non-positive definite component directly from the system matrix resulting from a frequency-domain FEM-based analysis. The resulting new representation of the finite-element operator ensures an iterative solution to converge in a small number of iterations. We then add back the non-positive definite component to synthesize the original solution with negligible cost.

Occupant Protection during Orion Crew Exploration Vehicle Landings

NASA Technical Reports Server (NTRS)

Gernhardt, Michael L.; Jones, J. A.; Granderson, B. K.; Somers, J. T.

2009-01-01

The constellation program is evaluating current vehicle design capabilities for nominal water landings and contingency land landings of the Orion Crew Exploration vehicle. The Orion Landing Strategy tiger team was formed to lead the technical effort for which associated activities include the current vehicle design, susceptibility to roll control and tip over, reviewing methods for assessing occupant injury during ascent / aborts /landings, developing an alternate seat/attenuation design solution which improves occupant protection and operability, and testing the seat/attenuation system designs to ensure valid results. The EVA physiology, systems and Performance (EPSP) project is leading the effort under the authority of the Tiger Team Steering committee to develop, verify, validate and accredit biodynamics models using a variety of crash and injury databases including NASCAR, Indy Car and military aircraft. The validated biodynamics models will be used by the Constellation program to evaluate a variety of vehicle, seat and restraint designs in the context of multiple nominal and off-nominal landing scenarios. The models will be used in conjunction with Acceptable Injury Risk definitions to provide new occupant protection requirements for the Constellation Program.

Preliminary Analysis of Low-Thrust Gravity Assist Trajectories by An Inverse Method and a Global Optimization Technique.

NASA Astrophysics Data System (ADS)

de Pascale, P.; Vasile, M.; Casotto, S.

The design of interplanetary trajectories requires the solution of an optimization problem, which has been traditionally solved by resorting to various local optimization techniques. All such approaches, apart from the specific method employed (direct or indirect), require an initial guess, which deeply influences the convergence to the optimal solution. The recent developments in low-thrust propulsion have widened the perspectives of exploration of the Solar System, while they have at the same time increased the difficulty related to the trajectory design process. Continuous thrust transfers, typically characterized by multiple spiraling arcs, have a broad number of design parameters and thanks to the flexibility offered by such engines, they typically turn out to be characterized by a multi-modal domain, with a consequent larger number of optimal solutions. Thus the definition of the first guesses is even more challenging, particularly for a broad search over the design parameters, and it requires an extensive investigation of the domain in order to locate the largest number of optimal candidate solutions and possibly the global optimal one. In this paper a tool for the preliminary definition of interplanetary transfers with coast-thrust arcs and multiple swing-bys is presented. Such goal is achieved combining a novel methodology for the description of low-thrust arcs, with a global optimization algorithm based on a hybridization of an evolutionary step and a deterministic step. Low thrust arcs are described in a 3D model in order to account the beneficial effects of low-thrust propulsion for a change of inclination, resorting to a new methodology based on an inverse method. The two-point boundary values problem (TPBVP) associated with a thrust arc is solved by imposing a proper parameterized evolution of the orbital parameters, by which, the acceleration required to follow the given trajectory with respect to the constraints set is obtained simply through algebraic computation. By this method a low-thrust transfer satisfying the boundary conditions on position and velocity can be quickly assessed, with low computational effort since no numerical propagation is required. The hybrid global optimization algorithm is made of a double step. Through the evolutionary search a large number of optima, and eventually the global one, are located, while the deterministic step consists of a branching process that exhaustively partitions the domain in order to have an extensive characterization of such a complex space of solutions. Furthermore, the approach implements a novel direct constraint-handling technique allowing the treatment of mixed-integer nonlinear programming problems (MINLP) typical of multiple swingby trajectories. A low-thrust transfer to Mars is studied as a test bed for the low-thrust model, thus presenting the main characteristics of the different shapes proposed and the features of the possible sub-arcs segmentations between two planets with respect to different objective functions: minimum time and minimum fuel consumption transfers. Other various test cases are also shown and further optimized, proving the effective capability of the proposed tool.

Control methods for aiding a pilot during STOL engine failure transients

NASA Technical Reports Server (NTRS)

Nelson, E. R.; Debra, D. B.

1976-01-01

Candidate autopilot control laws that control the engine failure transient sink rates by demonstrating the engineering application of modern state variable control theory were defined. The results of approximate modal analysis were compared to those derived from full state analyses provided from computer design solutions. The aircraft was described, and a state variable model of its longitudinal dynamic motion due to engine and control variations was defined. The classical fast and slow modes were assumed to be sufficiently different to define reduced order approximations of the aircraft motion amendable to hand analysis control definition methods. The original state equations of motion were also applied to a large scale state variable control design program, in particular OPTSYS. The resulting control laws were compared with respect to their relative responses, ease of application, and meeting the desired performance objectives.

Common Criteria related security design patterns--validation on the intelligent sensor example designed for mine environment.

PubMed

Bialas, Andrzej

2010-01-01

The paper discusses the security issues of intelligent sensors that are able to measure and process data and communicate with other information technology (IT) devices or systems. Such sensors are often used in high risk applications. To improve their robustness, the sensor systems should be developed in a restricted way to provide them with assurance. One of assurance creation methodologies is Common Criteria (ISO/IEC 15408), used for IT products and systems. The contribution of the paper is a Common Criteria compliant and pattern-based method for the intelligent sensors security development. The paper concisely presents this method and its evaluation for the sensor detecting methane in a mine, focusing on the security problem of the intelligent sensor definition and solution. The aim of the validation is to evaluate and improve the introduced method.

Investigation of the Influence of Microgravity on Transport Mechanism in a Virtual Spaceflight Chamber: A Flight Definition Program

NASA Technical Reports Server (NTRS)

Trolinger, James D.; Rangel, Roger; Witherow, William; Rogers, Jan; Lal, Ravindra B.

1999-01-01

A need exists for understanding precisely how particles move and interact in a fluid in the absence of gravity. Such understanding is required, for example, for modeling and predicting crystal growth in space where crystals grow from solution around nucleation sites as well as for any study of particles or bubbles in liquids or in experiments where particles are used as tracers for mapping microconvection. We have produced an exact solution to the general equation of motion of particles at extremely low Reynolds number in microgravity that covers a wide range of interesting conditions. We have also developed diagnostic tools and experimental techniques to test the validity of the general equation . This program, which started in May, 1998, will produce the flight definition for an experiment in a microgravity environment of space to validate the theoretical model. We will design an experiment with the help of the theoretical model that is optimized for testing the model, measuring g, g-jitter, and other microgravity phenomena. This paper describes the goals, rational, and approach for the flight definition program. The first objective of this research is to understand the physics of particle interactions with fluids and other particles in low Reynolds number flows in microgravity. Secondary objectives are to (1) observe and quantify g-jitter effects and microconvection on particles in fluids, (2) validate an exact solution to the general equation of motion of a particle in a fluid, and (3) to characterize the ability of isolation tables to isolate experiments containing particle in liquids. The objectives will be achieved by recording a large number of holograms of particle fields in microgravity under controlled conditions, extracting the precise three-dimensional position of all of the particles as a function of time and examining the effects of all parameters on the motion of the particles. The feasibility for achieving these results has already been established in the ongoing ground-based NRA, which led to the "virtual spaceflight chamber" concept.

Application of Artificial Intelligence For Euler Solutions Clustering

NASA Astrophysics Data System (ADS)

Mikhailov, V.; Galdeano, A.; Diament, M.; Gvishiani, A.; Agayan, S.; Bogoutdinov, Sh.; Graeva, E.; Sailhac, P.

Results of Euler deconvolution strongly depend on the selection of viable solutions. Synthetic calculations using multiple causative sources show that Euler solutions clus- ter in the vicinity of causative bodies even when they do not group densely about perimeter of the bodies. We have developed a clustering technique to serve as a tool for selecting appropriate solutions. The method RODIN, employed in this study, is based on artificial intelligence and was originally designed for problems of classification of large data sets. It is based on a geometrical approach to study object concentration in a finite metric space of any dimension. The method uses a formal definition of cluster and includes free parameters that facilitate the search for clusters of given proper- ties. Test on synthetic and real data showed that the clustering technique successfully outlines causative bodies more accurate than other methods of discriminating Euler solutions. In complicated field cases such as the magnetic field in the Gulf of Saint Malo region (Brittany, France), the method provides geologically insightful solutions. Other advantages of the clustering method application are: - Clusters provide solutions associated with particular bodies or parts of bodies permitting the analysis of different clusters of Euler solutions separately. This may allow computation of average param- eters for individual causative bodies. - Those measurements of the anomalous field that yield clusters also form dense clusters themselves. The application of cluster- ing technique thus outlines areas where the influence of different causative sources is more prominent. This allows one to focus on areas for reinterpretation, using different window sizes, structural indices and so on.

Solution to Projectile Motion with Quadratic Drag and Graphing the Trajectory in Spreadsheets

ERIC Educational Resources Information Center

Benacka, Jan

2010-01-01

This note gives the analytical solution to projectile motion with quadratic drag by decomposing the velocity vector to "x," "y" coordinate directions. The solution is given by definite integrals. First, the impact angle is estimated from above, then the projectile coordinates are computed, and the trajectory is graphed at various launch angles and…

Architecture for space habitats. Role of architectural design in planning artificial environment for long time manned space missions

NASA Astrophysics Data System (ADS)

Martinez, Vera

2007-02-01

The paper discusses concepts about the role of architecture in the design of space habitats and the development of a general evaluation criteria of architectural design contribution. Besides the existing feasibility studies, the general requisites, the development studies, and the critical design review which are mainly based on the experience of human space missions and the standards of the NASA-STD-3000 manual and which analyze and evaluate the relation between man and environment and between man and machine mainly in its functionality, there is very few material about design of comfort and wellbeing of man in space habitat. Architecture for space habitat means the design of an artificial environment with much comfort in an "atmosphere" of wellbeing. These are mainly psychological effects of human factors which are very important in the case of a long time space mission. How can the degree of comfort and "wellbeing atmosphere" in an artificial environment be measured? How can the quality of the architectural contribution in space design be quantified? Definition of a criteria catalogue to reach a larger objectivity in architectural design evaluation. Definition of constant parameters as a result of project necessities to quantify the quality of the design. Architectural design analysis due the application and verification within the parameters and consequently overlapping and evaluating results. Interdisciplinary work between architects, astronautics, engineers, psychologists, etc. All the disciplines needed for planning a high quality habitat for humans in space. Analysis of the principles of well designed artificial environment. Good quality design for space architecture is the result of the interaction and interrelation between many different project necessities (technological, environmental, human factors, transportation, costs, etc.). Each of this necessities is interrelated in the design project and cannot be evaluated on its own. Therefore, the design process needs constant check ups to choose each time the best solution in relation to the whole. As well as for the main disciplines around human factors, architectural design for space has to be largely tested to produce scientific improvement.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Astrophysics Data System (ADS)

Vaughan, W. W.; Green, C. E.

1985-03-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Technical Reports Server (NTRS)

Vaughan, W. W.; Green, C. E.

1985-01-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

A solution thermodynamics definition of the fiber saturation point and the derivation of a wood-water phase (state) diagram

Treesearch

Samuel L. Zelinka; Samuel V. Glass; Joseph E. Jakes; Donald S. Stone

2016-01-01

The fiber saturation point (FSP) is an important concept in wood– moisture relations that differentiates between the states of water in wood and has been discussed in the literature for over 100 years. Despite its importance and extensive study, the exact theoretical definition of the FSP and the operational definition (the correct way to measure the FSP) are still...

The 3 + 1 decomposition of conformal Yano-Killing tensors and ‘momentary’ charges for the spin-2 field

NASA Astrophysics Data System (ADS)

Jezierski, Jacek; Migacz, Szymon

2015-02-01

The ‘fully charged’ spin-2 field solution is presented. This is an analog of the Coulomb solution in electrodynamics and represents the ‘non-waving’ part of the spin-2 field theory. Basic facts and definitions of the spin-2 field and conformal Yano-Killing tensors are introduced. Application of those two objects provides a precise definition of quasi-local gravitational charge. Next, the 3 + 1 decomposition leads to the construction of the momentary gravitational charges on the initial surface, which is applicable for Schwarzschild-like spacetimes.

On substructuring algorithms and solution techniques for the numerical approximation of partial differential equations

NASA Technical Reports Server (NTRS)

Gunzburger, M. D.; Nicolaides, R. A.

1986-01-01

Substructuring methods are in common use in mechanics problems where typically the associated linear systems of algebraic equations are positive definite. Here these methods are extended to problems which lead to nonpositive definite, nonsymmetric matrices. The extension is based on an algorithm which carries out the block Gauss elimination procedure without the need for interchanges even when a pivot matrix is singular. Examples are provided wherein the method is used in connection with finite element solutions of the stationary Stokes equations and the Helmholtz equation, and dual methods for second-order elliptic equations.

What's the ROI for resolving the nursing faculty shortage?

PubMed

Kowalski, Karren; Kelley, Brian M

2013-01-01

The nursing faculty shortage will have a fundamental impact on the ability to produce nurses. For most nursing schools and states, however, concerns about the relative merits of different solutions to the nursing faculty shortage are misplaced. Without significantly increased visibility and definition, accompanied by a clear public, private, and health care organization return on investment (ROI), proposing solutions to the nursing faculty shortage is at best premature and at worst irrelevant. There is simply too much competition for resources to expect that a vaguely defined and invisible problem with no rationale for increased investment will receive sufficient support from critical decision makers and constituencies. First must come problem definition, visibility, and ROI. Only then can the case be made for implementing solutions to the nursing faculty shortage.

40 CFR 63.3004 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Requirements and Information § 63.3004 What definitions apply to this subpart? Terms used in this subpart are... application vacuum exhaust means the exhaust from the vacuum system used to remove excess resin solution from... binds the fibers. Emission limitation means an emission limit, operating limit, or work practice...

40 CFR 63.3004 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Requirements and Information § 63.3004 What definitions apply to this subpart? Terms used in this subpart are... application vacuum exhaust means the exhaust from the vacuum system used to remove excess resin solution from... binds the fibers. Emission limitation means an emission limit, operating limit, or work practice...

77 FR 36409 - ``Specially Designed'' Definition

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... Regulations (ITAR). The term ``specially designed'' is used widely in the Commerce Control List (CCL) and...) controls ``[c]omponents, parts, accessories, attachments and associated equipment specifically designed or... and, in order to avoid a definitional loop, do not use ``specially designed'' as a control criterion...

Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobson, D; Churby, A; Krieger, E

2011-07-25

The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtualmore » model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.« less

Lightweight application for generating clinical research information systems: MAGIC.

PubMed

Leskošek, Brane; Pajntar, Marjan

2015-12-01

Our purpose was to build and test a lightweight solution for generating clinical research information systems (CRIS) that would allow non-IT professionals with basic knowledge of computer usage to quickly define and build a ready-to-use, safe and secure web-based clinical research system for data management. We use the acronym MAGIC (Medical Application Generator InteraCtive) for the system. The generated CRIS should be very easy to build and use, so a common LAMP (Linux Apache MySQL Perl) platform was used, which also enables short development cycles. The application was built and tested using eXtreme Programming (XP) principles by a small development team consisting of one informatics specialist, one physician and one graphical designer/programmer. The parameter and graphical user interface (GUI) definitions for the CRIS can be made by non-IT professionals using an intuitive English-language-like formalism called application definition language (ADL). From these definitions, the MAGIC builds an end-user CRIS that can be used on a wide variety of platforms (from standard workstations to hand-held devices). A working example of a national health-care-quality assessment program is presented to illustrate this process. The lightweight application for generating CRIS (MAGIC) has proven to be useful for both clinical and analytical users in real working environment. To achieve better performance and interoperability, we are planning to recompile the application using XML schemas (XSD) in HL7 CDA or openEHR archetypes formats used for parameters definition and for data interchange between different information systems.

Integrated multidisciplinary CAD/CAE environment for micro-electro-mechanical systems (MEMS)

NASA Astrophysics Data System (ADS)

Przekwas, Andrzej J.

1999-03-01

Computational design of MEMS involves several strongly coupled physical disciplines, including fluid mechanics, heat transfer, stress/deformation dynamics, electronics, electro/magneto statics, calorics, biochemistry and others. CFDRC is developing a new generation multi-disciplinary CAD systems for MEMS using high-fidelity field solvers on unstructured, solution-adaptive grids for a full range of disciplines. The software system, ACE + MEMS, includes all essential CAD tools; geometry/grid generation for multi- discipline, multi-equation solvers, GUI, tightly coupled configurable 3D field solvers for FVM, FEM and BEM and a 3D visualization/animation tool. The flow/heat transfer/calorics/chemistry equations are solved with unstructured adaptive FVM solver, stress/deformation are computed with a FEM STRESS solver and a FAST BEM solver is used to solve linear heat transfer, electro/magnetostatics and elastostatics equations on adaptive polygonal surface grids. Tight multidisciplinary coupling and automatic interoperability between the tools was achieved by designing a comprehensive database structure and APIs for complete model definition. The virtual model definition is implemented in data transfer facility, a publicly available tool described in this paper. The paper presents overall description of the software architecture and MEMS design flow in ACE + MEMS. It describes current status, ongoing effort and future plans for the software. The paper also discusses new concepts of mixed-level and mixed- dimensionality capability in which 1D microfluidic networks are simulated concurrently with 3D high-fidelity models of discrete components.

Design And Construction Of A Miniaturized Motor Controller For Interplanetary Rover

NASA Astrophysics Data System (ADS)

Lofgren, Henrik; Lijemark, Tomas; Lamoureux, Enrique; Bruhn, Fredrik; Hagstrom, Maria; Hall, Karin; Ljunggren, Anders; Habinc, Sandi; Gruener, Gabriel; Rusconi, Andrea; Boyes, Ben; Wagenbach, Susanne; Poulakis, Pantelis; Kohler, Johan

2011-10-01

ÅAC Microtec AB is leading an international consortium developing a Motion Control Chip (MCC) for the European Space Agency (ESA) under a TRP contract. The team consists of the prime ÅAC (Sweden), Aeroflex Gaisler (Sweden), Centre Suisse d'Electroniqueet de Microtechnique (CSEM, Switzerland), Selex Galileo Italy), Astrium (UK) and DLR Institute of Space Systems (Germany). In order to improve performance of rovers and robotic arms, one solution is to place the controller physically as close as possible to the motors. This reduces the harness and hence saves weight, decreases thermal leakage from the main system body and simplifies the final assembly. Nevertheless, with this approach the constraints on the electronics become more stringent: the assembly has to survive a very wide temperature range as well as vibrations and possibly dust, and at the same time it should be as small and light as possible. To cope with these design constraints, the Motion Control Chip (MCC) is based on stacked ceramic substrate technology in a Multi Chip Module (MCM), on which active components are assembled as bare dies. This approach was chosen in favor of special large ASIC development to reduce cost and make the design more flexible. By choosing a MCM solution, the design will allow both FPGA and ASICs to be used. FPGAs are used initially to lower the prototyping cost and later be replaced with ASICs as the packaging technology is qualified for the extreme environments of ISS, Mars and Moon. The manufacturing of the first iteration of miniaturized MCC modules is ongoing and initial functional tests have been executed. The results are currently being evaluated and when this is finalized the full test campaign including environmental tests will planned in detail. The tests are assumed to be finalized during the spring of 2011. Aeroflex Gaisler is the official ESA maintainer of the RTEMS port for the LEON3 processor and has been providing support to several developments. CSEM is providing the software for the MCC, which includes PID position, velocity, and torque control for brushed and brushless DC motors, as well as telecommand, telemetry and housekeeping through SpaceWire and CAN bus. Astrium UK is in charge of the definition of requirements for rover locomotion applications of the MCC. Astrium UK has experience from the Beagle project and is responsible for the Exomars rover development. Selex Galileo is in charge of the definition of requirements for three major applications of the MCC: robotic arms, complex motorized payloads (as drills and sample distribution systems) and exoskeletons. DLR Institute of Space Systems contributes to the definition of requirements related to rover locomotion drives and is furthermore in charge of environmental testing of the MCC prototype.

A class of nonideal solutions. 1: Definition and properties

NASA Technical Reports Server (NTRS)

Zeleznik, F. J.

1983-01-01

A class of nonideal solutions is defined by constructing a function to represent the composition dependence of thermodynamic properties for members of the class, and some properties of these solutions are studied. The constructed function has several useful features: (1) its parameters occur linearly; (2) it contains a logarithmic singularity in the dilute solution region and contains ideal solutions and regular solutions as special cases; and (3) it is applicable to N-ary systems and reduces to M-ary systems (M or = N) in a form-invariant manner.

24 CFR 945.105 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... DESIGNATED HOUSING-PUBLIC HOUSING DESIGNATED FOR OCCUPANCY BY DISABLED, ELDERLY, OR DISABLED AND ELDERLY FAMILIES General § 945.105 Definitions. The terms Department, Elderly person, HUD, NAHA, Public Housing.... Designated family means the category of family for whom the project is designated (e. g., elderly family in a...

Robinson-Trautman solution with scalar hair

NASA Astrophysics Data System (ADS)

Tahamtan, T.; Svítek, O.

2015-05-01

The explicit Robinson-Trautman solution with a minimally coupled free scalar field is derived and analyzed. It is shown that this solution contains curvature singularity, which is initially naked but later enveloped by the horizon. We use the quasilocal horizon definition and prove its existence in later retarded times using sub- and supersolution method combined with growth estimates. We show that the solution is generally of algebraic type II but reduces to type D in spherical symmetry.

Modeling the Transport of Heavy Metals in Soils

DTIC Science & Technology

1990-09-01

vii NOMENCLATURE Term Definition a aggregate radius (cm) b Freundlich parameter (dimensionless) c concentration of dissolved chemical in soil solution (mg...metals (e.g., Cu, Hg, Cr, Cd, and Zn). retention-release reactions in the soil solution have been observed to be strongly time-dependent. Recent...of the dissolved chemical in the soil solution (mg L 2 s = mount of solute retained per unit mass of the soil matrix (mg kg- )-, D = hydrodynamic

A review on the sustainability of constructed wetlands for wastewater treatment: Design and operation.

PubMed

Wu, Haiming; Zhang, Jian; Ngo, Huu Hao; Guo, Wenshan; Hu, Zhen; Liang, Shuang; Fan, Jinlin; Liu, Hai

2015-01-01

Constructed wetlands (CWs) have been used as a green technology to treat various wastewaters for several decades. CWs offer a land-intensive, low-energy, and less-operational-requirements alternative to conventional treatment systems, especially for small communities and remote locations. However, the sustainable operation and successful application of these systems remains a challenge. Hence, this paper aims to provide and inspire sustainable solutions for the performance and application of CWs by giving a comprehensive review of CWs' application and the recent development on their sustainable design and operation for wastewater treatment. Firstly, a brief summary on the definition, classification and application of current CWs was presented. The design parameters and operational conditions of CWs including plant species, substrate types, water depth, hydraulic load, hydraulic retention time and feeding mode related to the sustainable operation for wastewater treatments were then discussed. Lastly, future research on improving the stability and sustainability of CWs were highlighted. Copyright © 2014 Elsevier Ltd. All rights reserved.

MSAT signalling and network management architectures

NASA Technical Reports Server (NTRS)

Garland, Peter; Keelty, J. Malcolm

1989-01-01

Spar Aerospace has been active in the design and definition of Mobile Satellite Systems since the mid 1970's. In work sponsored by the Canadian Department of Communications, various payload configurations have evolved. In addressing the payload configuration, the requirements of the mobile user, the service provider and the satellite operator have always been the most important consideration. The current Spar 11 beam satellite design is reviewed, and its capabilities to provide flexibility and potential for network growth within the WARC87 allocations are explored. To enable the full capabilities of the payload to be realized, a large amount of ground based Switching and Network Management infrastructure will be required, when space segment becomes available. Early indications were that a single custom designed Demand Assignment Multiple Access (DAMA) switch should be implemented to provide efficient use of the space segment. As MSAT has evolved into a multiple service concept, supporting many service providers, this architecture should be reviewed. Some possible signalling and Network Management solutions are explored.

Making the Case for a Model-Based Definition of Engineering Materials (Postprint)

DTIC Science & Technology

2017-09-12

MBE relies on digi- tal representations, or a model-based definition (MBD), to define a product throughout design , manufacturing and sus- tainment...discovery through development, scale-up, product design and qualification, manufacture and sustainment have changed little over the past decades. This...testing data provided a certifiable material definition, so as to minimize risk and simplify procurement of materials during the design , manufacture , and

49 CFR 173.115 - Class 2, Divisions 2.1, 2.2, and 2.3-Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cryogenic gas, compressed gas in solution, asphyxiant gas and oxidizing gas). For the purpose of this... °F). (f) Compressed gas in solution. A compressed gas in solution is a non-liquefied compressed gas...% by mass or more flammable components and the chemical heat of combustion is 30 kJ/g or more; (2) An...

49 CFR 173.115 - Class 2, Divisions 2.1, 2.2, and 2.3-Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... cryogenic gas, compressed gas in solution, asphyxiant gas and oxidizing gas). For the purpose of this... °F). (f) Compressed gas in solution. A compressed gas in solution is a non-liquefied compressed gas... mass or more flammable components and the chemical heat of combustion is 30 kJ/g or more; (2) An...

49 CFR 173.115 - Class 2, Divisions 2.1, 2.2, and 2.3-Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cryogenic gas, compressed gas in solution, asphyxiant gas and oxidizing gas). For the purpose of this... °F). (f) Compressed gas in solution. A compressed gas in solution is a non-liquefied compressed gas...% by mass or more flammable components and the chemical heat of combustion is 30 kJ/g or more; (2) An...

Satellite Power Systems (SPS) concept definition study. Volume 4: SPS point design definition

NASA Technical Reports Server (NTRS)

Hanley, G.

1978-01-01

The satellite power systems point design concept is described. The concept definition includes satellite, ground and space systems, and their relationships. Emphasis is placed on the definition of the GaAlAs photovoltaic satellite system. The major subsystems of the satellite system including power conversion, power distribution and control, microwave, attitude control and stationkeeping, thermal control, structures, and information management and control are discussed.

Counter-current chromatography: simple process and confusing terminology.

PubMed

Conway, Walter D

2011-09-09

The origin of counter-current chromatography is briefly stated, followed by a description of the mechanism of elution of solutes, which illustrates the elegance and simplicity of the technique. The CCC retention equation can be mentally derived from three facts; that a substance with a distribution coefficient of 0 elutes at the mobile phase solvent front (one mobile phase volume); and one with a distribution coefficient of 1 elutes at the column volume of mobile phase; and solutes with higher distribution coefficients elute at additional multiples of the stationary phase volume. The pattern corresponds to the classical solute retention equation for chromatography, V(R)=V(M)+K(C)V(S), K(C) not being limited to integer values. This allows the entire pattern of solute retention to be visualized on the chromatogram. The high volume fraction of stationary phase in CCC greatly enhances resolution. A survey of the names, symbols and definitions of several widely used chromatography and liquid-liquid distribution parameters in the IUPAC Gold Book and in a recent summary in LC-GC by Majors and Carr revealed numerous conflicts in both names and definitions. These will retard accurate dissemination of CCC research unless the discordance is resolved. It is proposed that the chromatography retention parameter, K(C), be called the distribution coefficient and that a new biphasic distribution parameter, K(Δ(A)), be defined for CCC and be called the species partition ratio. The definition of V(M) should be clarified. V(H) is suggested to represent the holdup volume and V(X) is suggested for the extra-column volume. H(V) and H(L) are suggested to represent the volume and length of a theoretical plate in CCC. Definitions of the phase ratio, β, conflict and should be clarified. Copyright © 2011 Elsevier B.V. All rights reserved.

Systems approach to the design of the CCD sensors and camera electronics for the AIA and HMI instruments on solar dynamics observatory

NASA Astrophysics Data System (ADS)

Waltham, N.; Beardsley, S.; Clapp, M.; Lang, J.; Jerram, P.; Pool, P.; Auker, G.; Morris, D.; Duncan, D.

2017-11-01

Solar Dynamics Observatory (SDO) is imaging the Sun in many wavelengths near simultaneously and with a resolution ten times higher than the average high-definition television. In this paper we describe our innovative systems approach to the design of the CCD cameras for two of SDO's remote sensing instruments, the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI). Both instruments share use of a custom-designed 16 million pixel science-grade CCD and common camera readout electronics. A prime requirement was for the CCD to operate with significantly lower drive voltages than before, motivated by our wish to simplify the design of the camera readout electronics. Here, the challenge lies in the design of circuitry to drive the CCD's highly capacitive electrodes and to digitize its analogue video output signal with low noise and to high precision. The challenge is greatly exacerbated when forced to work with only fully space-qualified, radiation-tolerant components. We describe our systems approach to the design of the AIA and HMI CCD and camera electronics, and the engineering solutions that enabled us to comply with both mission and instrument science requirements.

vSPARQL: A View Definition Language for the Semantic Web

PubMed Central

Shaw, Marianne; Detwiler, Landon T.; Noy, Natalya; Brinkley, James; Suciu, Dan

2010-01-01

Translational medicine applications would like to leverage the biological and biomedical ontologies, vocabularies, and data sets available on the semantic web. We present a general solution for RDF information set reuse inspired by database views. Our view definition language, vSPARQL, allows applications to specify the exact content that they are interested in and how that content should be restructured or modified. Applications can access relevant content by querying against these view definitions. We evaluate the expressivity of our approach by defining views for practical use cases and comparing our view definition language to existing query languages. PMID:20800106

Algorithmic Mechanism Design of Evolutionary Computation.

PubMed

Pei, Yan

2015-01-01

We consider algorithmic design, enhancement, and improvement of evolutionary computation as a mechanism design problem. All individuals or several groups of individuals can be considered as self-interested agents. The individuals in evolutionary computation can manipulate parameter settings and operations by satisfying their own preferences, which are defined by an evolutionary computation algorithm designer, rather than by following a fixed algorithm rule. Evolutionary computation algorithm designers or self-adaptive methods should construct proper rules and mechanisms for all agents (individuals) to conduct their evolution behaviour correctly in order to definitely achieve the desired and preset objective(s). As a case study, we propose a formal framework on parameter setting, strategy selection, and algorithmic design of evolutionary computation by considering the Nash strategy equilibrium of a mechanism design in the search process. The evaluation results present the efficiency of the framework. This primary principle can be implemented in any evolutionary computation algorithm that needs to consider strategy selection issues in its optimization process. The final objective of our work is to solve evolutionary computation design as an algorithmic mechanism design problem and establish its fundamental aspect by taking this perspective. This paper is the first step towards achieving this objective by implementing a strategy equilibrium solution (such as Nash equilibrium) in evolutionary computation algorithm.

Algorithmic Mechanism Design of Evolutionary Computation

PubMed Central

2015-01-01

We consider algorithmic design, enhancement, and improvement of evolutionary computation as a mechanism design problem. All individuals or several groups of individuals can be considered as self-interested agents. The individuals in evolutionary computation can manipulate parameter settings and operations by satisfying their own preferences, which are defined by an evolutionary computation algorithm designer, rather than by following a fixed algorithm rule. Evolutionary computation algorithm designers or self-adaptive methods should construct proper rules and mechanisms for all agents (individuals) to conduct their evolution behaviour correctly in order to definitely achieve the desired and preset objective(s). As a case study, we propose a formal framework on parameter setting, strategy selection, and algorithmic design of evolutionary computation by considering the Nash strategy equilibrium of a mechanism design in the search process. The evaluation results present the efficiency of the framework. This primary principle can be implemented in any evolutionary computation algorithm that needs to consider strategy selection issues in its optimization process. The final objective of our work is to solve evolutionary computation design as an algorithmic mechanism design problem and establish its fundamental aspect by taking this perspective. This paper is the first step towards achieving this objective by implementing a strategy equilibrium solution (such as Nash equilibrium) in evolutionary computation algorithm. PMID:26257777

Oligomer Molecules for Efficient Organic Photovoltaics.

PubMed

Lin, Yuze; Zhan, Xiaowei

2016-02-16

Solar cells, a renewable, clean energy technology that efficiently converts sunlight into electricity, are a promising long-term solution for energy and environmental problems caused by a mass of production and the use of fossil fuels. Solution-processed organic solar cells (OSCs) have attracted much attention in the past few years because of several advantages, including easy fabrication, low cost, lightweight, and flexibility. Now, OSCs exhibit power conversion efficiencies (PCEs) of over 10%. In the early stage of OSCs, vapor-deposited organic dye materials were first used in bilayer heterojunction devices in the 1980s, and then, solution-processed polymers were introduced in bulk heterojunction (BHJ) devices. Relative to polymers, vapor-deposited small molecules offer potential advantages, such as a defined molecular structure, definite molecular weight, easy purification, mass-scale production, and good batch-to-batch reproducibility. However, the limited solubility and high crystallinity of vapor-deposited small molecules are unfavorable for use in solution-processed BHJ OSCs. Conversely, polymers have good solution-processing and film-forming properties and are easily processed into flexible devices, whereas their polydispersity of molecular weights and difficulty in purification results in batch to batch variation, which may hamper performance reproducibility and commercialization. Oligomer molecules (OMs) are monodisperse big molecules with intermediate molecular weights (generally in the thousands), and their sizes are between those of small molecules (generally with molecular weights <1000) and polymers (generally with molecular weights >10000). OMs not only overcome shortcomings of both vapor-deposited small molecules and solution-processed polymers, but also combine their advantages, such as defined molecular structure, definite molecular weight, easy purification, mass-scale production, good batch-to-batch reproducibility, good solution processability, and film-forming properties. Therefore, OMs are a good choice for solution-processed reproducible OSCs toward scalable commercialized applications. Considerable efforts have been dedicated to developing new OM electron donors and electron acceptors for OSCs. So far, the highest PCEs of solution-processed OSCs based on OM donors and acceptors are 9-10% and 6-7%, respectively. OM materials have become promising alternatives to polymer and/or fullerene materials for efficient and stable OSCs. In this Account, we present a brief survey of the recent developments in solution-processable OM electron donors and acceptors and their application in OSCs. Rational design of OMs with star- and linear-shaped structures based on triphenylamine, benzodithiophene, and indacenodithiophene units and their impacts on device performance are discussed. Structure-property relationships are also proposed. Furthermore, the remaining challenges and the key research directions in the near future are also addressed. In the next years, an interdisciplinary approach involving novel OM materials, especially electron acceptor materials, accurate morphology optimization, and advanced device technologies will probably bring high-efficiency and stable OSCs to final commercialization.

Mapping of H.264 decoding on a multiprocessor architecture

NASA Astrophysics Data System (ADS)

van der Tol, Erik B.; Jaspers, Egbert G.; Gelderblom, Rob H.

2003-05-01

Due to the increasing significance of development costs in the competitive domain of high-volume consumer electronics, generic solutions are required to enable reuse of the design effort and to increase the potential market volume. As a result from this, Systems-on-Chip (SoCs) contain a growing amount of fully programmable media processing devices as opposed to application-specific systems, which offered the most attractive solutions due to a high performance density. The following motivates this trend. First, SoCs are increasingly dominated by their communication infrastructure and embedded memory, thereby making the cost of the functional units less significant. Moreover, the continuously growing design costs require generic solutions that can be applied over a broad product range. Hence, powerful programmable SoCs are becoming increasingly attractive. However, to enable power-efficient designs, that are also scalable over the advancing VLSI technology, parallelism should be fully exploited. Both task-level and instruction-level parallelism can be provided by means of e.g. a VLIW multiprocessor architecture. To provide the above-mentioned scalability, we propose to partition the data over the processors, instead of traditional functional partitioning. An advantage of this approach is the inherent locality of data, which is extremely important for communication-efficient software implementations. Consequently, a software implementation is discussed, enabling e.g. SD resolution H.264 decoding with a two-processor architecture, whereas High-Definition (HD) decoding can be achieved with an eight-processor system, executing the same software. Experimental results show that the data communication considerably reduces up to 65% directly improving the overall performance. Apart from considerable improvement in memory bandwidth, this novel concept of partitioning offers a natural approach for optimally balancing the load of all processors, thereby further improving the overall speedup.

Gravitational energy in the framework of embedding and splitting theories

NASA Astrophysics Data System (ADS)

Grad, D. A.; Ilin, R. V.; Paston, S. A.; Sheykin, A. A.

We study various definitions of the gravitational field energy based on the usage of isometric embeddings in the Regge-Teitelboim approach. For the embedding theory, we consider the coordinate translations on the surface as well as the coordinate translations in the flat bulk. In the latter case, the independent definition of gravitational energy-momentum tensor appears as a Noether current corresponding to global inner symmetry. In the field-theoretic form of this approach (splitting theory), we consider Noether procedure and the alternative method of energy-momentum tensor defining by varying the action of the theory with respect to flat bulk metric. As a result, we obtain energy definition in field-theoretic form of embedding theory which, among the other features, gives a nontrivial result for the solutions of embedding theory which are also solutions of Einstein equations. The question of energy localization is also discussed.

Technology-design-manufacturing co-optimization for advanced mobile SoCs

NASA Astrophysics Data System (ADS)

Yang, Da; Gan, Chock; Chidambaram, P. R.; Nallapadi, Giri; Zhu, John; Song, S. C.; Xu, Jeff; Yeap, Geoffrey

2014-03-01

How to maintain the Moore's Law scaling beyond the 193 immersion resolution limit is the key question semiconductor industry needs to answer in the near future. Process complexity will undoubtfully increase for 14nm node and beyond, which brings both challenges and opportunities for technology development. A vertically integrated design-technologymanufacturing co-optimization flow is desired to better address the complicated issues new process changes bring. In recent years smart mobile wireless devices have been the fastest growing consumer electronics market. Advanced mobile devices such as smartphones are complex systems with the overriding objective of providing the best userexperience value by harnessing all the technology innovations. Most critical system drivers are better system performance/power efficiency, cost effectiveness, and smaller form factors, which, in turns, drive the need of system design and solution with More-than-Moore innovations. Mobile system-on-chips (SoCs) has become the leading driver for semiconductor technology definition and manufacturing. Here we highlight how the co-optimization strategy influenced architecture, device/circuit, process technology and package, in the face of growing process cost/complexity and variability as well as design rule restrictions.

Space station data system analysis/architecture study. Task 4: System definition report

NASA Technical Reports Server (NTRS)

1985-01-01

Functional/performance requirements for the Space Station Data System (SSDS) are analyzed and architectural design concepts are derived and evaluated in terms of their performance and growth potential, technical feasibility and risk, and cost effectiveness. The design concepts discussed are grouped under five major areas: SSDS top-level architecture overview, end-to-end SSDS design and operations perspective, communications assumptions and traffic analysis, onboard SSDS definition, and ground SSDS definition.

Simultaneous personnel and vehicle shift scheduling in the waste management sector.

PubMed

Ghiani, Gianpaolo; Guerriero, Emanuela; Manni, Andrea; Manni, Emanuele; Potenza, Agostino

2013-07-01

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the definition of shift schedules for both personnel and vehicles. This activity has a great incidence on the tactical and operational cost for companies. In this paper, we propose an integer programming model to find an optimal solution to the integrated problem. The aim is to determine optimal schedules at minimum cost. Moreover, we design a fast and effective heuristic to face large-size problems. Both approaches are tested on data from a real-world case in Southern Italy and compared to the current practice utilized by the company managing the service, showing that simultaneously solving these problems can lead to significant monetary savings. Copyright © 2013 Elsevier Ltd. All rights reserved.

Common Criteria Related Security Design Patterns—Validation on the Intelligent Sensor Example Designed for Mine Environment

PubMed Central

Bialas, Andrzej

2010-01-01

The paper discusses the security issues of intelligent sensors that are able to measure and process data and communicate with other information technology (IT) devices or systems. Such sensors are often used in high risk applications. To improve their robustness, the sensor systems should be developed in a restricted way to provide them with assurance. One of assurance creation methodologies is Common Criteria (ISO/IEC 15408), used for IT products and systems. The contribution of the paper is a Common Criteria compliant and pattern-based method for the intelligent sensors security development. The paper concisely presents this method and its evaluation for the sensor detecting methane in a mine, focusing on the security problem of the intelligent sensor definition and solution. The aim of the validation is to evaluate and improve the introduced method. PMID:22399888

High dynamic range CMOS (HDRC) imagers for safety systems

NASA Astrophysics Data System (ADS)

Strobel, Markus; Döttling, Dietmar

2013-04-01

The first part of this paper describes the high dynamic range CMOS (HDRC®) imager - a special type of CMOS image sensor with logarithmic response. The powerful property of a high dynamic range (HDR) image acquisition is detailed by mathematical definition and measurement of the optoelectronic conversion function (OECF) of two different HDRC imagers. Specific sensor parameters will be discussed including the pixel design for the global shutter readout. The second part will give an outline on the applications and requirements of cameras for industrial safety. Equipped with HDRC global shutter sensors SafetyEYE® is a high-performance stereo camera system for safe three-dimensional zone monitoring enabling new and more flexible solutions compared to existing safety guards.

[Immortal time bias in pharmacoepidemiological studies: definition, solutions and examples].

PubMed

Faillie, Jean-Luc; Suissa, Samy

2015-01-01

Among the observational studies of drug effects in chronic diseases, many of them have found effects that were exaggerated or wrong. Among bias responsible for these errors, the immortal time bias, concerning the definition of exposure and exposure periods, is relevantly important as it usually tends to wrongly attribute a significant benefit to the study drug (or exaggerate a real benefit). In this article, we define the mechanism of immortal time bias, we present possible solutions and illustrate its consequences through examples of pharmacoepidemiological studies of drug effects. © 2014 Société Française de Pharmacologie et de Thérapeutique.

On polynomial preconditioning for indefinite Hermitian matrices

NASA Technical Reports Server (NTRS)

Freund, Roland W.

1989-01-01

The minimal residual method is studied combined with polynomial preconditioning for solving large linear systems (Ax = b) with indefinite Hermitian coefficient matrices (A). The standard approach for choosing the polynomial preconditioners leads to preconditioned systems which are positive definite. Here, a different strategy is studied which leaves the preconditioned coefficient matrix indefinite. More precisely, the polynomial preconditioner is designed to cluster the positive, resp. negative eigenvalues of A around 1, resp. around some negative constant. In particular, it is shown that such indefinite polynomial preconditioners can be obtained as the optimal solutions of a certain two parameter family of Chebyshev approximation problems. Some basic results are established for these approximation problems and a Remez type algorithm is sketched for their numerical solution. The problem of selecting the parameters such that the resulting indefinite polynomial preconditioners speeds up the convergence of minimal residual method optimally is also addressed. An approach is proposed based on the concept of asymptotic convergence factors. Finally, some numerical examples of indefinite polynomial preconditioners are given.

Experimental study of contact edge roughness on sub-100 nm various circular shapes

NASA Astrophysics Data System (ADS)

Lee, Tae Y.; Ihm, Dongchul; Kang, Hyo C.; Lee, Jum B.; Lee, Byoung H.; Chin, Soo B.; Cho, Do H.; Song, Chang L.

2005-05-01

The measurement of edge roughness has become a hot issue in the semiconductor industry. Especially the contact roughness is being more critical as design rule shrinks. Major vendors offer a variety of features to measure the edge roughness in their CD-SEMs. For the line and space patterns, features such as Line Edge Roughness (LER) and Line Width Roughness (LWR) are available in current CD-SEMs. However the features currently available in commercial CD-SEM cannot provide a proper solution in monitoring the contact roughness. We had introduced a new parameter R, measurement algorithm and definition of contact edge roughness to quantify CER and CSR in previous paper. The parameter, R could provide an alternative solution to monitor contact or island pattern roughness. In this paper, we investigated to assess optimum number of CD measurement (1-D) and fitting method for CER or CSR. The study was based on a circular contact shape. Some new ideas to quantify CER or CSR were also suggested with preliminary experimental results.

Predicting Droplet Formation on Centrifugal Microfluidic Platforms

NASA Astrophysics Data System (ADS)

Moebius, Jacob Alfred

Centrifugal microfluidics is a widely known research tool for biological sample and water quality analysis. Currently, the standard equipment used for such diagnostic applications include slow, bulky machines controlled by multiple operators. These machines can be condensed into a smaller, faster benchtop sample-to-answer system. Sample processing is an important step taken to extract, isolate, and convert biological factors, such as nucleic acids or proteins, from a raw sample to an analyzable solution. Volume definition is one such step. The focus of this thesis is the development of a model predicting monodispersed droplet formation and the application of droplets as a technique for volume definition. First, a background of droplet microfluidic platforms is presented, along with current biological analysis technologies and the advantages of integrating such technologies onto microfluidic platforms. Second, background and theories of centrifugal microfluidics is given, followed by theories relevant to droplet emulsions. Third, fabrication techniques for centrifugal microfluidic designs are discussed. Finally, the development of a model for predicting droplet formation on the centrifugal microfluidic platform are presented for the rest of the thesis. Predicting droplet formation analytically based on the volumetric flow rates of the continuous and dispersed phases, the ratios of these two flow rates, and the interfacial tension between the continuous and dispersed phases presented many challenges, which will be discussed in this work. Experimental validation was completed using continuous phase solutions of different interfacial tensions. To conclude, prospective applications are discussed with expected challenges.

40 CFR 60.281 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... cooking (digesting) wood chips in a water solution of sodium hydroxide and sodium sulfide (white liquor) at high temperature and pressure. Regeneration of the cooking chemicals through a recovery process is... any operation in which pulp is produced from wood by cooking (digesting) wood chips in a solution of...

Landslide management through the design and implementation of an early warning system

NASA Astrophysics Data System (ADS)

Intrieri, E.; Gigli, G.; Mugnai, F.; Fanti, R.; Casagli, N.

2012-04-01

Within the framework of landslide management, early warning systems (EWSs) are an alternative and cost-effective means to reduce the risk with a low environmental and economical impact. In some cases they can even be the only solution, for instance when a landslide is so large that it cannot possibly be stabilized, when in an area there are too many unstable slopes and there are not enough financial resources to take care of them all individually, or when the residual risk after remediation works is still unacceptable. An EWS for a rockslide (at Torgiovannetto, Central Italy) has been designed after a period during which monitoring, landslide characterization and the definition of risk scenarios have been carried out. It consists in a 182 000 m3 rock wedge threatening two roads which are important for local transportation. The present work encompasses and describes all the components of the EWS, including the geological knowledge, the risk scenarios, the kinematic characterization of the landslide, the choice and installation of the monitoring system, the setting of appropriate alarm levels, the definition of plans of civil protection and so on. The focus is on practical and logistical issues met in all these phases and the counter-measures adopted. At present the system consists in 13 wire extensometers, 1 thermometer, 1 rain gauge and 3 cameras, in part connected through a wireless sensor network. Should a velocity threshold be exceeded by two or more sensors, the attention level would be entered, causing improved monitoring and surveillance. In case the behaviour of the landslide changes and, by using expert judgement and forecasting methods, an imminent failure is hinted, then an alarm is issued and the upper road is closed. The EWS has been designed by stressing the importance of redundancy, simplicity, communication and minimizing the probability of false alarms. Although site-specific, this system can be useful when facing similar situations, in particular because, differently to many other works that focus only on social or technological issues, this one gives importance also to geological and procedural considerations. Therefore some solutions can be widely applicable, even in different contexts.

Temperature effect on the small-to-large crossover lengthscale of hydrophobic hydration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Djikaev, Y. S., E-mail: idjikaev@buffalo.edu; Ruckenstein, E.

2013-11-14

The thermodynamics of hydration is expected to change gradually from entropic for small solutes to enthalpic for large ones. The small-to-large crossover lengthscale of hydrophobic hydration depends on the thermodynamic conditions of the solvent such as temperature, pressure, presence of additives, etc. We attempt to shed some light on the temperature dependence of the crossover lengthscale by using a probabilistic approach to water hydrogen bonding that allows one to obtain an analytic expression for the number of bonds per water molecule as a function of both its distance to a solute and solute radius. Incorporating that approach into the densitymore » functional theory, one can examine the solute size effects on its hydration over the entire small-to-large lengthscale range at a series of different temperatures. Knowing the dependence of the hydration free energy on the temperature and solute size, one can also obtain its enthalpic and entropic contributions as functions of both temperature and solute size. These functions can provide some interesting insight into the temperature dependence of the crossover lengthscale of hydrophobic hydration. The model was applied to the hydration of spherical particles of various radii in water in the temperature range from T = 293.15 K to T = 333.15 K. The model predictions for the temperature dependence of the hydration free energy of small hydrophobes are consistent with the experimental and simulational data on the hydration of simple molecular solutes. Three alternative definitions for the small-to-large crossover length-scale of hydrophobic hydration are proposed, and their temperature dependence is obtained. Depending on the definition and temperature, the small-to-large crossover in the hydration mechanism is predicted to occur for hydrophobes of radii from one to several nanometers. Independent of its definition, the crossover length-scale is predicted to decrease with increasing temperature.« less

Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.; Korona, F. Adam; McFarland, Shane

2012-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars [1] left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This paper will address the space suit system architecture and technologies required based upon human exploration extravehicular activity (EVA) destinations, and describe how they should evolve to meet the future exploration EVA needs of the US human space flight program.1, 2, 3 In looking forward to future US space exploration to a space suit architecture with maximum reuse of technology and functionality across a range of mission profiles and destinations, a series of exercises and analyses have provided a strong indication that the Constellation Program (CxP) space suit architecture is postured to provide a viable solution for future exploration missions4. The destination environmental analysis presented in this paper demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew given any human mission outside of low-Earth orbit (LEO). Additionally, some of the high-level trades presented here provide a review of the environmental and non-environmental design drivers that will become increasingly important the farther away from Earth humans venture. This paper demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, independent of any particular program, and provide architecture and design solutions for space suit systems in time or ahead of need dates for any particular crewed flight program in the future. The approach to space suit design and interface definition discussion will show how the architecture is very adaptable to programmatic and funding changes with minimal redesign effort such that the modular architecture can be quickly and efficiently honed into a specific mission point solution if required. Additionally, the modular system will allow for specific technology incorporation and upgrade as required with minimal redesign of the system.

Exploration Space Suit Architecture: Destination Environmental-Based Technology Development

NASA Technical Reports Server (NTRS)

Hill, Terry R.

2010-01-01

This paper picks up where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars (Hill, Johnson, IEEEAC paper #1209) left off in the development of a space suit architecture that is modular in design and interfaces and could be reconfigured to meet the mission or during any given mission depending on the tasks or destination. This paper will walk though the continued development of a space suit system architecture, and how it should evolve to meeting the future exploration EVA needs of the United States space program. In looking forward to future US space exploration and determining how the work performed to date in the CxP and how this would map to a future space suit architecture with maximum re-use of technology and functionality, a series of thought exercises and analysis have provided a strong indication that the CxP space suit architecture is well postured to provide a viable solution for future exploration missions. Through the destination environmental analysis that is presented in this paper, the modular architecture approach provides the lowest mass, lowest mission cost for the protection of the crew given any human mission outside of low Earth orbit. Some of the studies presented here provide a look and validation of the non-environmental design drivers that will become every-increasingly important the further away from Earth humans venture and the longer they are away. Additionally, the analysis demonstrates a logical clustering of design environments that allows a very focused approach to technology prioritization, development and design that will maximize the return on investment independent of any particular program and provide architecture and design solutions for space suit systems in time or ahead of being required for any particular manned flight program in the future. The new approach to space suit design and interface definition the discussion will show how the architecture is very adaptable to programmatic and funding changes with minimal redesign effort required such that the modular architecture can be quickly and efficiently honed into a specific mission point solution if required.

A Smart Wearable Sensor System for Counter-Fighting Overweight in Teenagers.

PubMed

Standoli, Carlo Emilio; Guarneri, Maria Renata; Perego, Paolo; Mazzola, Marco; Mazzola, Alessandra; Andreoni, Giuseppe

2016-08-10

PEGASO is a FP7-funded project whose goal is to develop an ICT and mobile-based platform together with an appropriate strategy to tackle the diffusion of obesity and other lifestyle-related illnesses among teenagers. Indeed, the design of an engaging strategy, leveraging a complementary set of technologies, is the approach proposed by the project to promote the adoption of healthy habits such as active lifestyle and balanced nutrition and to effectively counter-fight the emergence of overweight and obesity in the younger population. A technological key element of such a strategy sees the adoption of wearable sensors to monitor teenagers' activities, which is at the basis of developing awareness about the current lifestyle. This paper describes the experience carried out in the framework of the PEGASO project in developing and evaluating wearable monitoring systems addressed to adolescents. The paper describes the methodological approach based on the co-designing of such a wearable system and the main results that, in the first phase, involved a total of 407 adolescents across Europe in a series of focus groups conducted in three countries for the requirements definition phase. Moreover, it describes an evaluation process of signal reliability during the usage of the wearable system. The main results described here are: (a) a prototype of the standardized experimental protocol that has been developed and applied to test signal reliability in smart garments; (b) the requirements definition methodology through a co-design activity and approach to address user requirements and preferences and not only technological specifications. Such co-design approach is able to support a higher system acceptance and usability together with a sustained adoption of the solution with respect to the traditional technology push system development strategy.

A Smart Wearable Sensor System for Counter-Fighting Overweight in Teenagers

PubMed Central

Standoli, Carlo Emilio; Guarneri, Maria Renata; Perego, Paolo; Mazzola, Marco; Mazzola, Alessandra; Andreoni, Giuseppe

2016-01-01

PEGASO is a FP7-funded project whose goal is to develop an ICT and mobile-based platform together with an appropriate strategy to tackle the diffusion of obesity and other lifestyle-related illnesses among teenagers. Indeed, the design of an engaging strategy, leveraging a complementary set of technologies, is the approach proposed by the project to promote the adoption of healthy habits such as active lifestyle and balanced nutrition and to effectively counter-fight the emergence of overweight and obesity in the younger population. A technological key element of such a strategy sees the adoption of wearable sensors to monitor teenagers’ activities, which is at the basis of developing awareness about the current lifestyle. This paper describes the experience carried out in the framework of the PEGASO project in developing and evaluating wearable monitoring systems addressed to adolescents. The paper describes the methodological approach based on the co-designing of such a wearable system and the main results that, in the first phase, involved a total of 407 adolescents across Europe in a series of focus groups conducted in three countries for the requirements definition phase. Moreover, it describes an evaluation process of signal reliability during the usage of the wearable system. The main results described here are: (a) a prototype of the standardized experimental protocol that has been developed and applied to test signal reliability in smart garments; (b) the requirements definition methodology through a co-design activity and approach to address user requirements and preferences and not only technological specifications. Such co-design approach is able to support a higher system acceptance and usability together with a sustained adoption of the solution with respect to the traditional technology push system development strategy. PMID:27517929

Common quandaries and their practical solutions in Bayesian network modeling

Treesearch

Bruce G. Marcot

2017-01-01

Use and popularity of Bayesian network (BN) modeling has greatly expanded in recent years, but many common problems remain. Here, I summarize key problems in BN model construction and interpretation,along with suggested practical solutions. Problems in BN model construction include parameterizing probability values, variable definition, complex network structures,...

40 CFR 60.281 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... cooking (digesting) wood chips in a water solution of sodium hydroxide and sodium sulfide (white liquor... any operation in which pulp is produced from wood by cooking (digesting) wood chips in a solution of... wood in white liquor, and associated flash tank(s), blow tank(s), chip steamer(s), and condenser(s). (e...

40 CFR 60.281 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... cooking (digesting) wood chips in a water solution of sodium hydroxide and sodium sulfide (white liquor... any operation in which pulp is produced from wood by cooking (digesting) wood chips in a solution of... wood in white liquor, and associated flash tank(s), blow tank(s), chip steamer(s), and condenser(s). (e...

40 CFR 60.281 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... cooking (digesting) wood chips in a water solution of sodium hydroxide and sodium sulfide (white liquor... any operation in which pulp is produced from wood by cooking (digesting) wood chips in a solution of... wood in white liquor, and associated flash tank(s), blow tank(s), chip steamer(s), and condenser(s). (e...

Avoiding Degeneracy in Multidimensional Unfolding by Penalizing on the Coefficient of Variation

ERIC Educational Resources Information Center

Busing, Frank M. T. A.; Groenen, Patrick J. K.; Heiser, Willem J.

2005-01-01

Multidimensional unfolding methods suffer from the degeneracy problem in almost all circumstances. Most degeneracies are easily recognized: the solutions are perfect but trivial, characterized by approximately equal distances between points from different sets. A definition of an absolutely degenerate solution is proposed, which makes clear that…

Superposition: New Solutions from Known Solutions

ERIC Educational Resources Information Center

Roberts, Charles E.

2003-01-01

This note contains material to be presented to students in a first course in differential equations immediately after they have completed studying first-order differential equations and their applications. The purpose of presenting this material is four-fold: to review definitions studied previously; to provide a historical context which cites the…

40 CFR 63.3004 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... application vacuum exhaust means the exhaust from the vacuum system used to remove excess resin solution from... fiberglass mat by bonding glass fibers to each other using a resin solution. Nonwoven wet-formed fiberglass... mix as it is applied to the glass fibers to form the mat. ...

40 CFR 63.3004 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... application vacuum exhaust means the exhaust from the vacuum system used to remove excess resin solution from... fiberglass mat by bonding glass fibers to each other using a resin solution. Nonwoven wet-formed fiberglass... mix as it is applied to the glass fibers to form the mat. ...

40 CFR 63.3004 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... application vacuum exhaust means the exhaust from the vacuum system used to remove excess resin solution from... fiberglass mat by bonding glass fibers to each other using a resin solution. Nonwoven wet-formed fiberglass... mix as it is applied to the glass fibers to form the mat. ...

Sulfuric Acid and Water: Paradoxes of Dilution

ERIC Educational Resources Information Center

Leenson, I. A.

2004-01-01

On equilibrium properties of aqueous solutions of sulfuric acid, Julius Thomsen has marked that the heat evolved on diluting liquid sulfuric acid with water is a continuous function of the water used, and excluded absolutely the acceptance of definite hydrates as existing in the solution. Information about thermochemical measurement, a discussion…

Single crystals of metal solid solutions

NASA Technical Reports Server (NTRS)

Miller, J. F.; Austin, A. E.; Richard, N.; Griesenauer, N. M.; Moak, D. P.; Mehrabian, M. R.; Gelles, S. H.

1974-01-01

The following definitions were sought in the research on single crystals of metal solid solutions: (1) the influence of convection and/or gravity present during crystallization on the substructure of a metal solid solution; (2) the influence of a magnetic field applied during crystallization on the substructure of a metal solid solution; and (3) requirements for a space flight experiment to verify the results. Growth conditions for the selected silver-zinc alloy system are described, along with pertinent technical and experimental details of the project.

Homotopy decomposition method for solving one-dimensional time-fractional diffusion equation

NASA Astrophysics Data System (ADS)

Abuasad, Salah; Hashim, Ishak

2018-04-01

In this paper, we present the homotopy decomposition method with a modified definition of beta fractional derivative for the first time to find exact solution of one-dimensional time-fractional diffusion equation. In this method, the solution takes the form of a convergent series with easily computable terms. The exact solution obtained by the proposed method is compared with the exact solution obtained by using fractional variational homotopy perturbation iteration method via a modified Riemann-Liouville derivative.

23 CFR 172.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., design, engineering, surveying, mapping, or architectural related services with respect to a construction... DESIGN RELATED SERVICE CONTRACTS § 172.3 Definitions. As used in this part: Audit means a review to test... individual or firm providing engineering and design related services as a party to the contract. Contracting...

23 CFR 172.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., design, engineering, surveying, mapping, or architectural related services with respect to a construction... DESIGN RELATED SERVICE CONTRACTS § 172.3 Definitions. As used in this part: Audit means a review to test... individual or firm providing engineering and design related services as a party to the contract. Contracting...

23 CFR 172.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., design, engineering, surveying, mapping, or architectural related services with respect to a construction... DESIGN RELATED SERVICE CONTRACTS § 172.3 Definitions. As used in this part: Audit means a review to test... individual or firm providing engineering and design related services as a party to the contract. Contracting...

23 CFR 172.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., design, engineering, surveying, mapping, or architectural related services with respect to a construction... DESIGN RELATED SERVICE CONTRACTS § 172.3 Definitions. As used in this part: Audit means a review to test... individual or firm providing engineering and design related services as a party to the contract. Contracting...

23 CFR 172.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., design, engineering, surveying, mapping, or architectural related services with respect to a construction... DESIGN RELATED SERVICE CONTRACTS § 172.3 Definitions. As used in this part: Audit means a review to test... individual or firm providing engineering and design related services as a party to the contract. Contracting...

vSPARQL: a view definition language for the semantic web.

PubMed

Shaw, Marianne; Detwiler, Landon T; Noy, Natalya; Brinkley, James; Suciu, Dan

2011-02-01

Translational medicine applications would like to leverage the biological and biomedical ontologies, vocabularies, and data sets available on the semantic web. We present a general solution for RDF information set reuse inspired by database views. Our view definition language, vSPARQL, allows applications to specify the exact content that they are interested in and how that content should be restructured or modified. Applications can access relevant content by querying against these view definitions. We evaluate the expressivity of our approach by defining views for practical use cases and comparing our view definition language to existing query languages. Copyright © 2010 Elsevier Inc. All rights reserved.

An empirical study of the process of crafting and using definitions

NASA Astrophysics Data System (ADS)

Little, Angela Jean

In this dissertation I analyze the process of crafting definitions whose purpose is classification. The context I examine is undergraduate upper-division physical science majors defining and naming sub-categories of a physical phenomenon in the context of a design task over an extended period of time. The goal of the design task is one of classification: help people better identify the phenomenon out in the world. I first develop an analytic framework for the process of improving a definition. This framework involves an interplay between four main elements: the current state of the definition, criteria for what makes a good definition, examples, and definitionally unarticulated knowledge (DUK). By DUK, I mean implicit judgments that definers make about categorization that have not been incorporated into the definition, per se. I show how criteria and the practices associated with meeting them guide the refinement work. Once participants craft their definition a question emerges: to what extent does it serve them as a tool when they make sense of new examples? I zoom in on moments where new examples are introduced by participants or the facilitator and describe the extent to which students rely on their own crafted definition. The consideration of a new example can sometimes lead to participants naming a new sub-category and I analyze this process as well. The detailed empirical analysis is bookended by a set of workshop design principles that made the analysis possible and some educational implications of the work. I lay out a set of design principles for creating activities wherein people engage productively in collaboratively defining. I conclude by exploring the educational implications for college physics teaching as well as more general instances where one is interested in crafting a definition for the purpose of classification.

'Underutilised' agricultural land: its definitions, potential use for future biomass production and its environmental implications

NASA Astrophysics Data System (ADS)

Miyake, Saori; Bargiel, Damian

2017-04-01

A growing bioeconomy and increased demand for biomass products on food, health, fibre, industrial products and energy require land resources for feedstock production. It has resulted in significant environmental and socio-economic challenges on a global scale. As a result, consideration of such effects of land use change (LUC) from biomass production (particularly for biofuel feedstock) has emerged as an important area of policy and research, and several potential solutions have been proposed to minimise such adverse LUC effects. One of these solutions is the use of lands that are not in production or not suitable for food crop production, such as 'marginal', 'degraded', 'abandoned' and 'surplus' agricultural lands for future biomass production. The terms referring to these lands are usually associated with the potential production of 'marginal crops', which can grow in marginal conditions (e.g. poor soil fertility, low rainfall, drought) without much water and agrochemical inputs. In our research, we referred to these lands as 'underutilised' agricultural land and attempted to define them for our case study areas located in Australia and Central and Eastern Europe (CEE). Our goal is to identify lands that can be used for future biomass production and to evaluate their environmental implications, particularly impacts related to biodiversity, water and soil at a landscape scale. The identification of these lands incorporates remote sensing and spatially explicit approaches. Our findings confirmed that there was no universal or single definition of the term 'underutilised' agricultural land as the definitions significantly vary by country and region depending not only on the biophysical environment but also political, institutional and socio-economic conditions. Moreover, our results highlighted that the environmental implications of production of biomass on 'underutilised' agricultural land for biomass production are highly controversial. Thus land use change scenarios with low-impact crops and production system must be designed for future biomass production taking into consideration climate, land use, local biophysical conditions and relevant policies (e.g. conservation) within a regional/ landscape planning framework.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 7: System/subsystem requirements data book

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Volume 7 of the Satellite Power Systems (SPS) Concept Definition Study final report summarizes the basic requirements used as a guide to systems analysis and is a basis for the selection of candidate SPS point design(s). Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point design(s). The identified subsystem/systems requirements are defined, and where appropriate, recommendations for alternate approaches which may represent improved design features are presented. A more detailed discussion of the selected point design(s) will be found in Volume 2 of this report.

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

NASA Technical Reports Server (NTRS)

1973-01-01

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

Natural environment design criteria for the space station program definition phase

NASA Technical Reports Server (NTRS)

Vaughan, W. W.

1984-01-01

The natural environment design criteria requirements for use in the Space Station and its Elements (SSPE) definition phase studies are presented. The atmospheric dynamic and thermodynamic environments, meteoroids, radiation, physical constants are addressed. It is intended to enable all groups involved in the definition phase studies to proceed with a common and consistent set of natural environment criteria requirements.

Mars aqueous chemistry experiment

NASA Technical Reports Server (NTRS)

Clark, Benton C.; Mason, Larry W.

1993-01-01

The Mars Aqueous Chemistry Experiment (MACE) is designed to conduct a variety of measurements on regolith samples, encompassing mineral phase analyses, chemical interactions with H2O, and physical properties determinations. From these data, much can be learned or inferred regarding the past weathering environment, the contemporaneous soil micro-environments, and the general chemical and physical state of the Martian regolith. By analyzing both soil and duricrust samples, the nature of the latter may become more apparent. Sites may be characterized for comparative purposes and criteria could be set for selection of high priority materials on future sample return missions. Progress for the first year MACE PIDDP is reported in two major areas of effort: (1) fluids handling concepts, definition, and breadboard fabrication and (2) aqueous chemistry ion sensing technology and test facility integration. A fluids handling breadboard was designed, fabricated, and tested at Mars ambient pressure. The breadboard allows fluid manipulation scenarios to be tested under the reduced pressure conditions expected in the Martian atmosphere in order to validate valve operations, orchestrate analysis sequences, investigate sealing integrity, and to demonstrate efficacy of the fluid handling concept. Additional fluid manipulation concepts have also been developed based on updated MESUR spacecraft definition. The Mars Aqueous Chemistry Experiment Ion Selective Electrode (ISE) facility was designed as a test bed to develop a multifunction interface for measurements of chemical ion concentrations in aqueous solution. The interface allows acquisition of real time data concerning the kinetics and heats of salt dissolution, and transient response to calibration and solubility events. An array of ion selective electrodes has been interfaced and preliminary calibration studies performed.

Mars aqueous chemistry experiment

NASA Astrophysics Data System (ADS)

Clark, Benton C.; Mason, Larry W.

1993-06-01

The Mars Aqueous Chemistry Experiment (MACE) is designed to conduct a variety of measurements on regolith samples, encompassing mineral phase analyses, chemical interactions with H2O, and physical properties determinations. From these data, much can be learned or inferred regarding the past weathering environment, the contemporaneous soil micro-environments, and the general chemical and physical state of the Martian regolith. By analyzing both soil and duricrust samples, the nature of the latter may become more apparent. Sites may be characterized for comparative purposes and criteria could be set for selection of high priority materials on future sample return missions. Progress for the first year MACE PIDDP is reported in two major areas of effort: (1) fluids handling concepts, definition, and breadboard fabrication and (2) aqueous chemistry ion sensing technology and test facility integration. A fluids handling breadboard was designed, fabricated, and tested at Mars ambient pressure. The breadboard allows fluid manipulation scenarios to be tested under the reduced pressure conditions expected in the Martian atmosphere in order to validate valve operations, orchestrate analysis sequences, investigate sealing integrity, and to demonstrate efficacy of the fluid handling concept. Additional fluid manipulation concepts have also been developed based on updated MESUR spacecraft definition. The Mars Aqueous Chemistry Experiment Ion Selective Electrode (ISE) facility was designed as a test bed to develop a multifunction interface for measurements of chemical ion concentrations in aqueous solution. The interface allows acquisition of real time data concerning the kinetics and heats of salt dissolution, and transient response to calibration and solubility events. An array of ion selective electrodes has been interfaced and preliminary calibration studies performed.

Major Design Drivers for LEO Space Surveillance in Europe and Solution Concepts

NASA Astrophysics Data System (ADS)

Krag, Holger; Flohrer, Tim; Klinkrad, Heiner

Europe is preparing for the development of an autonomous system for space situational aware-ness. One important segment of this new system will be dedicated to surveillance and tracking of space objects in Earth orbits. First concept and capability analysis studies have led to a draft system proposal. This proposal foresees, in a first deployment step, a groundbased system consisting of radar sensors and a network of optical telescopes. These sensors will be designed to have the capability of building up and maintaining a catalogue of space objects. A number of related services will be provided, including collision avoidance and the prediction of uncontrolled reentry events. Currently, the user requirements are consolidated, defining the different services, and the related accuracy and timeliness of the derived products. In this consolidation process parameters like the lower diameter limit above which catalogue coverage is to be achieved, the degree of population coverage in various orbital regions and the accuracy of the orbit data maintained in the catalogue are important design drivers for the selection of number and location of the sensors, and the definition of the required sensor performance. Further, the required minimum time for the detection of a manoeuvre, a newly launched object or a fragmentation event, significantly determines the required surveillance performance. In the requirement consolidation process the performance to be specified has to be based on a careful analysis which takes into account accuracy constraints of the services to be provided, the technical feasibility, complexity and costs. User requirements can thus not be defined with-out understanding the consequences they would pose on the system design. This paper will outline the design definition process for the surveillance and tracking segment of the European space situational awareness system. The paper will focus on the low-Earth orbits (LEO). It will present the core user requirements and the definition of the derived services. The de-sired performance parameters will be explained together with presenting their rationale and justification. This will be followed by an identification of the resulting major design drivers. The influence of these drivers on the system design will be analysed, including limiting object diameter, population coverage, orbit maintenance accuracy, and the minimum time to detect events like manoeuvres or breakups. The underlying simulation and verification concept will be explained. Finally, a first compilation of performance parameters for the surveillance and tracking segment will be presented and discussed.

Ultra high-definition video: convergence toward 100Gbps and beyond for digital A/V connectivity with fiber optics

NASA Astrophysics Data System (ADS)

Parekh, Devang; Nguyen, Nguyen X.

2018-02-01

The recent advent of Ultra-high-definition television (also known as Ultra HD television, Ultra HD, UHDTV, UHD and Super Hi-Vision) has accelerated a demand for a Fiber-in-the-Premises video communication (VCOM) solution that converges toward 100Gbps and Beyond. Hybrid Active-Optical-Cables (AOC) is a holistic connectivity platform well suited for this "The Last Yard" connectivity; as it combines both copper and fiber optics to deliver a high data-rate and power transmission needed. While technically feasible yet challenging to manufacture, hybrid-AOC could be a holygrail fiber-optics solution that dwarfs the volume of both telecom and datacom connection in the foreseeable future.

Definition of boundary and initial conditions in the analysis of saturated ground-water flow systems - An introduction

USGS Publications Warehouse

Franke, O. Lehn; Reilly, Thomas E.; Bennett, Gordon D.

1987-01-01

Accurate definition of boundary and initial conditions is an essential part of conceptualizing and modeling ground-water flow systems. This report describes the properties of the seven most common boundary conditions encountered in ground-water systems and discusses major aspects of their application. It also discusses the significance and specification of initial conditions and evaluates some common errors in applying this concept to ground-water-system models. An appendix is included that discusses what the solution of a differential equation represents and how the solution relates to the boundary conditions defining the specific problem. This report considers only boundary conditions that apply to saturated ground-water systems.

Study on the influence of stochastic properties of correction terms on the reliability of instantaneous network RTK

NASA Astrophysics Data System (ADS)

Próchniewicz, Dominik

2014-03-01

The reliability of precision GNSS positioning primarily depends on correct carrier-phase ambiguity resolution. An optimal estimation and correct validation of ambiguities necessitates a proper definition of mathematical positioning model. Of particular importance in the model definition is the taking into account of the atmospheric errors (ionospheric and tropospheric refraction) as well as orbital errors. The use of the network of reference stations in kinematic positioning, known as Network-based Real-Time Kinematic (Network RTK) solution, facilitates the modeling of such errors and their incorporation, in the form of correction terms, into the functional description of positioning model. Lowered accuracy of corrections, especially during atmospheric disturbances, results in the occurrence of unaccounted biases, the so-called residual errors. The taking into account of such errors in Network RTK positioning model is possible by incorporating the accuracy characteristics of the correction terms into the stochastic model of observations. In this paper we investigate the impact of the expansion of the stochastic model to include correction term variances on the reliability of the model solution. In particular the results of instantaneous solution that only utilizes a single epoch of GPS observations, is analyzed. Such a solution mode due to the low number of degrees of freedom is very sensitive to an inappropriate mathematical model definition. Thus the high level of the solution reliability is very difficult to achieve. Numerical tests performed for a test network located in mountain area during ionospheric disturbances allows to verify the described method for the poor measurement conditions. The results of the ambiguity resolution as well as the rover positioning accuracy shows that the proposed method of stochastic modeling can increase the reliability of instantaneous Network RTK performance.

Countering MANPADS: study of new concepts and applications: part two

NASA Astrophysics Data System (ADS)

Maltese, Dominique; Vergnolle, Jean-François; Aragones, Julien; Renaudat, Mathieu

2007-04-01

The latest events of ground-to-air Man Portable Air Defense (MANPAD) attacks against aircraft have revealed a new threat both for military and civilian aircraft. Consequently, the implementation of protecting systems (i.e. Directed Infra Red Counter Measure - DIRCM) in order to face IR guided missiles turns out to be now inevitable. In a near future, aircraft will have to possess detection, tracking, identification, targeting and jamming capabilities to face MANPAD threats. Besides, Multiple Missiles attacks become more and more current scenarios to deal with. In this paper, a practical example of DIRCM systems under study at SAGEM DEFENSE & SECURITY Company is presented. The article is the continuation of a previous SPIE one. Self-protection solutions include built-in and automatic locking-on, tracking, identification and laser jamming capabilities, including defeat assessment. Target Designations are provided by a Missile Warning System. Targets scenarios including multiple threats are considered to design systems architectures. In a first step, the article reminds the context, current and future threats (IR seekers of different generations...), and scenarios for system definition. Then, it focuses on potential self-protection systems under study at SAGEM DEFENSE & SECURITY Company. Different strategies including target identification, multi band laser and active imagery have been previously studied in order to design DIRCM System solutions. Thus, results of self-protection scenarios are provided for different MANPAD scenarios to highlight key problems to solve. Data have been obtained from simulation software modeling full DIRCM systems architectures on technical and operational scenarios (parametric studies).

The Piranha Solution: Monitoring and Protection of Proprietary System Intangible Assets

ERIC Educational Resources Information Center

Ladwig, Christine; Schwieger, Dana; Clayton, Donald

2017-01-01

The "Piranha Solution"® is a complex and valuable integrated chemical supply inventory management system protected as a trade secret by its asset holder, the Confluence Corporation. The "Piranha" program is the lifeblood of the corporation's growth and success in the chemical supply industry. A common definition of "trade…

PLUTO'S SEASONS: NEW PREDICTIONS FOR NEW HORIZONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, L. A.

Since the last Pluto volatile transport models were published in 1996, we have (1) new stellar occultation data from 2002 and 2006-2012 that show roughly twice the pressure as the first definitive occultation from 1988, (2) new information about the surface properties of Pluto, (3) a spacecraft due to arrive at Pluto in 2015, and (4) a new volatile transport model that is rapid enough to allow a large parameter-space search. Such a parameter-space search coarsely constrained by occultation results reveals three broad solutions: a high-thermal inertia, large volatile inventory solution with permanent northern volatiles (PNVs; using the rotational northmore » pole convention); a lower thermal-inertia, smaller volatile inventory solution with exchanges of volatiles between hemispheres and a pressure plateau beyond 2015 (exchange with pressure plateau, EPP); and solutions with still smaller volatile inventories, with exchanges of volatiles between hemispheres and an early collapse of the atmosphere prior to 2015 (exchange with early collapse, EEC). PNV and EPP are favored by stellar occultation data, but EEC cannot yet be definitively ruled out without more atmospheric modeling or additional occultation observations and analysis.« less

Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

NASA Technical Reports Server (NTRS)

Kofal, Allen E.

1987-01-01

The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

BigQ: a NoSQL based framework to handle genomic variants in i2b2.

PubMed

Gabetta, Matteo; Limongelli, Ivan; Rizzo, Ettore; Riva, Alberto; Segagni, Daniele; Bellazzi, Riccardo

2015-12-29

Precision medicine requires the tight integration of clinical and molecular data. To this end, it is mandatory to define proper technological solutions able to manage the overwhelming amount of high throughput genomic data needed to test associations between genomic signatures and human phenotypes. The i2b2 Center (Informatics for Integrating Biology and the Bedside) has developed a widely internationally adopted framework to use existing clinical data for discovery research that can help the definition of precision medicine interventions when coupled with genetic data. i2b2 can be significantly advanced by designing efficient management solutions of Next Generation Sequencing data. We developed BigQ, an extension of the i2b2 framework, which integrates patient clinical phenotypes with genomic variant profiles generated by Next Generation Sequencing. A visual programming i2b2 plugin allows retrieving variants belonging to the patients in a cohort by applying filters on genomic variant annotations. We report an evaluation of the query performance of our system on more than 11 million variants, showing that the implemented solution scales linearly in terms of query time and disk space with the number of variants. In this paper we describe a new i2b2 web service composed of an efficient and scalable document-based database that manages annotations of genomic variants and of a visual programming plug-in designed to dynamically perform queries on clinical and genetic data. The system therefore allows managing the fast growing volume of genomic variants and can be used to integrate heterogeneous genomic annotations.

Considerations for pattern placement error correction toward 5nm node

NASA Astrophysics Data System (ADS)

Yaegashi, Hidetami; Oyama, Kenichi; Hara, Arisa; Natori, Sakurako; Yamauchi, Shohei; Yamato, Masatoshi; Koike, Kyohei; Maslow, Mark John; Timoshkov, Vadim; Kiers, Ton; Di Lorenzo, Paolo; Fonseca, Carlos

2017-03-01

Multi-patterning has been adopted widely in high volume manufacturing as 193 immersion extension, and it becomes realistic solution of nano-order scaling. In fact, it must be key technology on single directional (1D) layout design [1] for logic devise and it becomes a major option for further scaling technique in SAQP. The requirement for patterning fidelity control is getting savior more and more, stochastic fluctuation as well as LER (Line edge roughness) has to be micro-scopic observation aria. In our previous work, such atomic order controllability was viable in complemented technique with etching and deposition [2]. Overlay issue form major potion in yield management, therefore, entire solution is needed keenly including alignment accuracy on scanner and detectability on overlay measurement instruments. As EPE (Edge placement error) was defined as the gap between design pattern and contouring of actual pattern edge, pattern registration in single process level must be considerable. The complementary patterning to fabricate 1D layout actually mitigates any process restrictions, however, multiple process step, symbolized as LELE with 193-i, is burden to yield management and affordability. Recent progress of EUV technology is remarkable, and it is major potential solution for such complicated technical issues. EUV has robust resolution limit and it must be definitely strong scaling driver for process simplification. On the other hand, its stochastic variation such like shot noise due to light source power must be resolved with any additional complemented technique. In this work, we examined the nano-order CD and profile control on EUV resist pattern and would introduce excellent accomplishments.

Validation & Safety Constraints: What We Want to Do… What We Can Do

NASA Astrophysics Data System (ADS)

Yepez, Amaya Atenicia; Peiro, Belen Martin; Bory, Stephane

2010-09-01

Autonomous safety critical systems require an exhaustive validation in order to guarantee robustness from different perspectives(SW, HW and algorithm design). In this paper we are presenting a performance validation approach dealing with an extensive list of difficulties, as lessons learnt from the space projects developed by GMV(e.g. within EGNOS and Galileo Programs). We will strongly recommend that the selected validation strategy is decided from the early stages of the system definition and it is carried out listening to the opinions and demands of all parties. In fact, to agree on the final solution, a trade-off will be needed in order to validate the requirements with the available means, in terms of amount of data and resources.

Possibility of increasing the fire-suppression efficiency of the foam in automatic extinguishing installations

NASA Astrophysics Data System (ADS)

Kachanov, I. V.; Veremenyuk, V. V.; Karpenchuk, I. V.; Pavlyukov, S. Yu.

2013-05-01

The mechanics of movement of a liquid in the diffuser of the injector of an automatic extinguishing installation with preaeration of the fire-fighting substance was theoretically investigated. An integral solution of the equation for movement of the preaerated fire-fighting gas-liquid mixture in the indicated diffuser has been obtained. A mathematical model of two-phase liquid flow in this diffuser, which allows one to calculate the distribution of the average pressure in the diffuser along its length and to determine the loss in this pressure, has been developed. This model can be used for designing the output region of a hydraulic system with a hydrodynamic drag providing the operation of its injector in a definite regime.

The Environmental Management Project Manager`s Handbook for improved project definition

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-02-01

The United States Department of Energy (DOE) is committed to providing high quality products that satisfy customer needs and are the associated with this goal, DOE personnel must possess the knowledge, skills, and abilities to ensure successful job performance. In addition, there must be recognition that the greatest obstacle to proper project performance is inadequate project definition. Without strong project definition, DOE environmental management efforts are vulnerable to fragmented solutions, duplication of effort, and wastes resources. The primary means of ensuring environmental management projects meet cost and schedule milestones is through a structured and graded approach to project definition, whichmore » is the focus of this handbook.« less

77 FR 36428 - Amendment to the International Traffic in Arms Regulations: Definition for “Specially Designed”

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

...: Specially Designed Definition. SUPPLEMENTARY INFORMATION: The Directorate of Defense Trade Controls (DDTC... Designed'' Although one of the goals of the ECR Initiative is to describe USML controls without using design intent criteria, a few of the controls in the proposed revision nonetheless use the term...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

40 CFR 1048.801 - What definitions apply to this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 7401-7671q. Adjustable parameter means any device, system, or element of design that someone can adjust... design function is to decrease emissions in the engine exhaust before it is exhausted to the environment... engine that is designed to run using an alcohol fuel. For purposes of this definition, alcohol fuels do...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2013 CFR

2013-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2014 CFR

2014-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

40 CFR 1048.801 - What definitions apply to this part?

Code of Federal Regulations, 2012 CFR

2012-07-01

.... 7401-7671q. Adjustable parameter means any device, system, or element of design that someone can adjust... design function is to decrease emissions in the engine exhaust before it is exhausted to the environment... engine that is designed to run using an alcohol fuel. For purposes of this definition, alcohol fuels do...

10 CFR 431.82 - Definitions concerning commercial packaged boilers.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) For service water heating in buildings but does not meet the definition of “hot water supply boiler... capable of supplying either steam or hot water, and designed to operate under the conditions in paragraphs... that is designed to be capable of supplying either steam or hot water, and designed to operate under...

75 FR 57481 - Statutorily Mandated Designation of Difficult Development Areas and Qualified Census Tracts for 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... makes new DDA designations annually for purposes of the Low-Income Housing Tax Credit (LIHTC) under... questions on how areas are designated and on geographic definitions, contact Michael K. Hollar, Senior... Budget (OMB) first published new metropolitan area definitions incorporating 2000 Census data in OMB...

77 FR 69507 - Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

..., ``Revise Shutdown Margin Definition To Address Advanced Fuel Designs'' AGENCY: Nuclear Regulatory... Shutdown Margin Definition to Address Advanced Fuel Designs.'' DATES: Comment period expires on December 19... address newer BWR fuel designs, which may be more reactive at shutdown temperatures above 68[emsp14][deg]F...

ROMPS critical design review. Volume 2: Robot module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

The robot module design documentation for the Remote Operated Materials Processing in Space (ROMPS) experiment is compiled. This volume presents the following information: robot module modifications; Easylab commands definitions and flowcharts; Easylab program definitions and flowcharts; robot module fault conditions and structure charts; and C-DOC flow structure and cross references.

Operational method of solution of linear non-integer ordinary and partial differential equations.

PubMed

Zhukovsky, K V

2016-01-01

We propose operational method with recourse to generalized forms of orthogonal polynomials for solution of a variety of differential equations of mathematical physics. Operational definitions of generalized families of orthogonal polynomials are used in this context. Integral transforms and the operational exponent together with some special functions are also employed in the solutions. The examples of solution of physical problems, related to such problems as the heat propagation in various models, evolutional processes, Black-Scholes-like equations etc. are demonstrated by the operational technique.

Automated Finite Element Analysis of Elastically-Tailored Plates

NASA Technical Reports Server (NTRS)

Jegley, Dawn C. (Technical Monitor); Tatting, Brian F.; Guerdal, Zafer

2003-01-01

A procedure for analyzing and designing elastically tailored composite laminates using the STAGS finite element solver has been presented. The methodology used to produce the elastic tailoring, namely computer-controlled steering of unidirectionally reinforced composite material tows, has been reduced to a handful of design parameters along with a selection of construction methods. The generality of the tow-steered ply definition provides the user a wide variety of options for laminate design, which can be automatically incorporated with any finite element model that is composed of STAGS shell elements. Furthermore, the variable stiffness parameterization is formulated so that manufacturability can be assessed during the design process, plus new ideas using tow steering concepts can be easily integrated within the general framework of the elastic tailoring definitions. Details for the necessary implementation of the tow-steering definitions within the STAGS hierarchy is provided, and the format of the ply definitions is discussed in detail to provide easy access to the elastic tailoring choices. Integration of the automated STAGS solver with laminate design software has been demonstrated, so that the large design space generated by the tow-steering options can be traversed effectively. Several design problems are presented which confirm the usefulness of the design tool as well as further establish the potential of tow-steered plies for laminate design.

Defining adaptation measures collaboratively: A participatory approach in the Doñana socio-ecological system, Spain.

PubMed

De Stefano, Lucia; Hernández-Mora, Nuria; Iglesias, Ana; Sánchez, Berta

2017-06-15

The uncertainty associated with the definition of strategies for climate change adaptation poses a challenge that cannot be faced by science alone. We present a participatory experience where, instead of having science defining solutions and eliciting stakeholders' feedback, local actors actually drove the process. While principles and methods of the approach are easily adaptable to different local contexts, this paper shows the contribution of participatory dynamics to the design of adaptation measures in the biodiversity-rich socio-ecological region surrounding the Doñana wetlands (Southern Spain). During the process, stakeholders and scientists collaboratively designed a common scenario for the future in which to define and assess a portfolio of potential adaptation measures, and found a safe, informal space for open dialogue and information exchange. Through this dialogue, points of connection among local actors emerged around the need for more integrated, transparent design of adaptation measures; for strengthening local capacity; and for strategies to diversify economic activities in order to increase the resilience of the region. Copyright © 2016 Elsevier Ltd. All rights reserved.

An innovative approach to compensator design

NASA Technical Reports Server (NTRS)

Mitchell, J. R.; Mcdaniel, W. L., Jr.

1973-01-01

The design is considered of a computer-aided-compensator for a control system from a frequency domain point of view. The design technique developed is based on describing the open loop frequency response by n discrete frequency points which result in n functions of the compensator coefficients. Several of these functions are chosen so that the system specifications are properly portrayed; then mathematical programming is used to improve all of these functions which have values below minimum standards. To do this, several definitions in regard to measuring the performance of a system in the frequency domain are given, e.g., relative stability, relative attenuation, proper phasing, etc. Next, theorems which govern the number of compensator coefficients necessary to make improvements in a certain number of functions are proved. After this a mathematical programming tool for aiding in the solution of the problem is developed. This tool is called the constraint improvement algorithm. Then for applying the constraint improvement algorithm generalized, gradients for the constraints are derived. Finally, the necessary theory is incorporated in a Computer program called CIP (compensator Improvement Program). The practical usefulness of CIP is demonstrated by two large system examples.

Hybrid texture generator

NASA Astrophysics Data System (ADS)

Miyata, Kazunori; Nakajima, Masayuki

1995-04-01

A method is given for synthesizing a texture by using the interface of a conventional drawing tool. The majority of conventional texture generation methods are based on the procedural approach, and can generate a variety of textures that are adequate for generating a realistic image. But it is hard for a user to imagine what kind of texture will be generated simply by looking at its parameters. Furthermore, it is difficult to design a new texture freely without a knowledge of all the procedures for texture generation. Our method offers a solution to these problems, and has the following four merits: First, a variety of textures can be obtained by combining a set of feature lines and attribute functions. Second, data definitions are flexible. Third, the user can preview a texture together with its feature lines. Fourth, people can design their own textures interactively and freely by using the interface of a conventional drawing tool. For users who want to build this texture generation method into their own programs, we also give the language specifications for generating a texture. This method can interactively provide a variety of textures, and can also be used for typographic design.

Development of Cold-Formed Steel Seismic Design Recommendations

DTIC Science & Technology

2015-08-01

applied loads, so the impact on design would be minimal. However, had the test been carried out to larger panel deformations without loss of capacity... test shear panels and development of preliminary design recommendations 6. Definition of material properties and coupon test results 7. Pretest of...predicted panel response based on preliminary design model and coupon test results 8. Definition of test configuration, procedures, and

40 CFR 415.161 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Sodium Chloride Production... the saturated brine solution remaining after precipitation of sodium chloride in the solar evaporation...

Boundaries of the Realizability Region of Membrane Separation Processes

NASA Astrophysics Data System (ADS)

Tsirlin, A. M.; Akhrenemkov, A. A.

2018-01-01

The region of realizability of membrane separation systems having a constant total membrane area has been determined for a definite output of a final product at a definite composition of a mixture flow. The law of change in the pressure in the mixture, corresponding to the minimum energy required for its separation, was concretized for media close in properties to ideal gases and solutions.

SISYPHUS: A high performance seismic inversion factory

NASA Astrophysics Data System (ADS)

Gokhberg, Alexey; Simutė, Saulė; Boehm, Christian; Fichtner, Andreas

2016-04-01

In the recent years the massively parallel high performance computers became the standard instruments for solving the forward and inverse problems in seismology. The respective software packages dedicated to forward and inverse waveform modelling specially designed for such computers (SPECFEM3D, SES3D) became mature and widely available. These packages achieve significant computational performance and provide researchers with an opportunity to solve problems of bigger size at higher resolution within a shorter time. However, a typical seismic inversion process contains various activities that are beyond the common solver functionality. They include management of information on seismic events and stations, 3D models, observed and synthetic seismograms, pre-processing of the observed signals, computation of misfits and adjoint sources, minimization of misfits, and process workflow management. These activities are time consuming, seldom sufficiently automated, and therefore represent a bottleneck that can substantially offset performance benefits provided by even the most powerful modern supercomputers. Furthermore, a typical system architecture of modern supercomputing platforms is oriented towards the maximum computational performance and provides limited standard facilities for automation of the supporting activities. We present a prototype solution that automates all aspects of the seismic inversion process and is tuned for the modern massively parallel high performance computing systems. We address several major aspects of the solution architecture, which include (1) design of an inversion state database for tracing all relevant aspects of the entire solution process, (2) design of an extensible workflow management framework, (3) integration with wave propagation solvers, (4) integration with optimization packages, (5) computation of misfits and adjoint sources, and (6) process monitoring. The inversion state database represents a hierarchical structure with branches for the static process setup, inversion iterations, and solver runs, each branch specifying information at the event, station and channel levels. The workflow management framework is based on an embedded scripting engine that allows definition of various workflow scenarios using a high-level scripting language and provides access to all available inversion components represented as standard library functions. At present the SES3D wave propagation solver is integrated in the solution; the work is in progress for interfacing with SPECFEM3D. A separate framework is designed for interoperability with an optimization module; the workflow manager and optimization process run in parallel and cooperate by exchanging messages according to a specially designed protocol. A library of high-performance modules implementing signal pre-processing, misfit and adjoint computations according to established good practices is included. Monitoring is based on information stored in the inversion state database and at present implements a command line interface; design of a graphical user interface is in progress. The software design fits well into the common massively parallel system architecture featuring a large number of computational nodes running distributed applications under control of batch-oriented resource managers. The solution prototype has been implemented on the "Piz Daint" supercomputer provided by the Swiss Supercomputing Centre (CSCS).

Electrical distribution studies for the 200 Area tank farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisler, J.B.

1994-08-26

This is an engineering study providing reliability numbers for various design configurations as well as computer analyses (Captor/Dapper) of the existing distribution system to the 480V side of the unit substations. The objective of the study was to assure the adequacy of the existing electrical system components from the connection at the high voltage supply point through the transformation and distribution equipment to the point where it is reduced to its useful voltage level. It also was to evaluate the reasonableness of proposed solutions of identified deficiencies and recommendations of possible alternate solutions. The electrical utilities are normally considered themore » most vital of the utility systems on a site because all other utility systems depend on electrical power. The system accepts electric power from the external sources, reduces it to a lower voltage, and distributes it to end-use points throughout the site. By classic definition, all utility systems extend to a point 5 feet from the facility perimeter. An exception is made to this definition for the electric utilities at this site. The electrical Utility System ends at the low voltage section of the unit substation, which reduces the voltage from 13.8 kV to 2,400, 480, 277/480 or 120/208 volts. These transformers are located at various distances from existing facilities. The adequacy of the distribution system which transports the power from the main substation to the individual area substations and other load centers is evaluated and factored into the impact of the future load forecast.« less

Single-layer HDR video coding with SDR backward compatibility

NASA Astrophysics Data System (ADS)

Lasserre, S.; François, E.; Le Léannec, F.; Touzé, D.

2016-09-01

The migration from High Definition (HD) TV to Ultra High Definition (UHD) is already underway. In addition to an increase of picture spatial resolution, UHD will bring more color and higher contrast by introducing Wide Color Gamut (WCG) and High Dynamic Range (HDR) video. As both Standard Dynamic Range (SDR) and HDR devices will coexist in the ecosystem, the transition from Standard Dynamic Range (SDR) to HDR will require distribution solutions supporting some level of backward compatibility. This paper presents a new HDR content distribution scheme, named SL-HDR1, using a single layer codec design and providing SDR compatibility. The solution is based on a pre-encoding HDR-to-SDR conversion, generating a backward compatible SDR video, with side dynamic metadata. The resulting SDR video is then compressed, distributed and decoded using standard-compliant decoders (e.g. HEVC Main 10 compliant). The decoded SDR video can be directly rendered on SDR displays without adaptation. Dynamic metadata of limited size are generated by the pre-processing and used to reconstruct the HDR signal from the decoded SDR video, using a post-processing that is the functional inverse of the pre-processing. Both HDR quality and artistic intent are preserved. Pre- and post-processing are applied independently per picture, do not involve any inter-pixel dependency, and are codec agnostic. Compression performance, and SDR quality are shown to be solidly improved compared to the non-backward and backward-compatible approaches, respectively using the Perceptual Quantization (PQ) and Hybrid Log Gamma (HLG) Opto-Electronic Transfer Functions (OETF).

Clinical Definitions of Melioidosis

PubMed Central

Cheng, Allen C.; Currie, Bart J.; Dance, David A. B.; Funnell, Simon G. P.; Limmathurotsakul, Direk; Simpson, Andrew J. H.; Peacock, Sharon J.

2013-01-01

Clinical definitions of melioidosis and inhalation-acquired melioidosis (Burkholderia pseudomallei infection) are described together with the evidence used to develop these definitions. Such definitions support accurate public health reporting, preparedness planning for deliberate B. pseudomallei release, design of experimental models, and categorization of naturally acquired melioidosis. PMID:23468355

49 CFR 569.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION REGROOVED TIRES § 569.3 Definitions. (a) Statutory definitions. All terms used... regard to the applicability of a standard in which a definition is contained. (c) Regroovable tire means a tire, either original tread or retread, designed and constructed with sufficient tread material to...

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD)

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Calvery, A. L.; Davis, D. A.; Dickmann, L.; Folger, D. H.; Jochem, E. N.; Kitto, C. M.; Vonlimbach, G.

1977-01-01

Integrated Programs for Aerospace Vehicle Design (IPAD) system design requirements are given. The information is based on the IPAD User Requirements Document (D6-IPAD-70013-D) and the Integrated Information Processing Requirements Document (D6-IPAD-70012-D). General information about IPAD and a list of the system design requirements that are to be satisfied by the IPAD system are given. The system design requirements definition is to be considered as a baseline definition of the IPAD system design requirements.

Design specifications for NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction): Phase 2, Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twitty, A.F.; Handler, B.H.; Duncan, L.D.

Data Systems Engineering Organization (DSEO) personnel are developing a prototype computer aided instruction (CAI) system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project is to provide a prototype for implementing CAI as an enhancement to existing NALDA training. The CAI prototype project is being performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. In Phase II a structured design and specification document was completed that will provide the basis for development and implementationmore » of the desired CAI system. Phase III will consist of designing, developing, and testing a user interface which will extend the features of the Phase II prototype. The design of the CAI prototype has followed a rigorous structured analysis based on Yourdon/DeMarco methodology and Information Engineering tools. This document includes data flow diagrams, a data dictionary, process specifications, an entity-relationship diagram, a curriculum description, special function key definitions, and a set of standards developed for the NALDA CAI Prototype.« less

A Boresight Adjustment Mechanism for use on Laser Altimeters

NASA Technical Reports Server (NTRS)

Hakun, Claef; Budinoff, Jason; Brown, Gary; Parong, Fil; Morell, Armando

2004-01-01

This paper describes the development of the Boresight Adjustment Mechanism (BAM) for the Geoscience Laser Altimeter System (GLAS) Instrument. The BAM was developed late in the integration and test phase of the GLAS instrument flight program. Thermal vacuum tests of the GLAS instrument indicated that the instrument boresight alignment stability over temperature may be marginal. To reduce the risk that GLAS may not be able to meet the boresight alignment requirements, an intensive effort was started to develop a BAM. Observatory-level testing and further evaluation of the boresight alignment data indicated that sufficient margin could be obtained utilizing existing instrument resources and therefore the BAM was never integrated onto the GLAS Instrument. However, the BAM was designed fabricated and fully qualified over a 4 month timeframe to be capable of precisely steering (< 1 arcsec over 300 arcsec) the output of three independent lasers to ensure the alignment between the transmit and receive paths of the GLAS instrument. The short timeline for the development of the mechanism resulted in several interesting design solutions. This paper discusses the requirement definition, design, and testing processes of the BAM development effort, how the design was affected by the extremely tight development schedule, and the lessons learned throughout the process.

Exploring the Concept of Healing Spaces.

PubMed

DuBose, Jennifer; MacAllister, Lorissa; Hadi, Khatereh; Sakallaris, Bonnie

2018-01-01

Evidence-based design (EBD) research has demonstrated the power of environmental design to support improved patient, family, and staff outcomes and to minimize or avoid harm in healthcare settings. While healthcare has primarily focused on fixing the body, there is a growing recognition that our healthcare system could do more by promoting overall wellness, and this requires expanding the focus to healing. This article explores how we can extend what we know from EBD about health impacts of spatial design to the more elusive goal of healing. By breaking the concept of healing into antecedent components (emotional, psychological, social, behavioral, and functional), this review of the literature presents the existing evidence to identify how healthcare spaces can foster healing. The environmental variables found to directly affect or facilitate one or more dimension of healing were organized into six groups of variables-homelike environment, access to views and nature, light, noise control, barrier-free environment, and room layout. While there is limited scientific research confirming design solutions for creating healing spaces, the literature search revealed relationships that provide a basis for a draft definition. Healing spaces evoke a sense of cohesion of the mind, body, and spirit. They support healing intention and foster healing relationships.

New periodic solutions for some planar N + 3-body problems with Newtonian potentials

NASA Astrophysics Data System (ADS)

Yuan, Pengfei; Zhang, Shiqing

2018-03-01

For some planar Newtonian N + 3-body problems, we use variational minimization methods to prove the existence of new periodic solutions satisfying that N bodies chase each other on a curve, and the other 3 bodies chase each other on another curve. From the definition of orbit spaces in our paper, we can find that they are new solutions which are also different from all the examples of Ferrario and Terracini (2004).

Space Tug avionics definition study. Volume 4: Supporting trade studies and analyses

NASA Technical Reports Server (NTRS)

1975-01-01

Analyses and trade studies were performed for the evaluation of the most desirable solutions to space tug subsystem requirements. These were accomplished at system, subsystem, and at component levels. The criteria, the candidate options evaluated, the selection process, and the recommended solutions that have been integrated together in the configuration descriptions are reported.

Towards Detection of Learner Misconceptions in a Medical Learning Environment: A Subgroup Discovery Approach

ERIC Educational Resources Information Center

Poitras, Eric G.; Doleck, Tenzin; Lajoie, Susanne P.

2018-01-01

Ill-structured problems, by definition, have multiple paths to a solution and are multifaceted making automated assessment and feedback a difficult challenge. Diagnostic reasoning about medical cases meet the criteria of ill-structured problem solving since there are multiple solution paths. The goal of this study was to develop an adaptive…

About Global Stable of Solutions of Logistic Equation with Delay

NASA Astrophysics Data System (ADS)

Kaschenko, S. A.; Loginov, D. O.

2017-12-01

The article is devoted to the definition of all the arguments for which all positive solutions of logistic equation with delay tend to zero for t → ∞. The authors have proved the acquainted Wright’s conjecture on evaluation of a multitude of such arguments. An approach that enables subsequent refinement of this evaluation has been developed.

9 CFR 381.169 - Ready-to-cook poultry products to which solutions are added.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Ready-to-cook poultry products to which solutions are added. 381.169 Section 381.169 Animals and Animal Products FOOD SAFETY AND... Definitions and Standards of Identity or Composition § 381.169 Ready-to-cook poultry products to which...

7 CFR 966.323 - Handling regulation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... varieties; cerasiform type tomatoes commonly referred to as cherry tomatoes; hydroponic tomatoes; and...) Definitions. Hydroponic tomatoes means tomatoes grown in solution without soil; greenhouse tomatoes means...

7 CFR 966.323 - Handling regulation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... varieties; cerasiform type tomatoes commonly referred to as cherry tomatoes; hydroponic tomatoes; and...) Definitions. Hydroponic tomatoes means tomatoes grown in solution without soil; greenhouse tomatoes means...

Some Problems in Educational Administration

ERIC Educational Resources Information Center

Lyons, Raymond F.

1977-01-01

Educational administration problems in developing countries are discussed. Possible solutions to problems of decision-making, decision implementation, communications, task definition, and financial control are suggested. (Author/DB)

Berry phase in Heisenberg representation

NASA Technical Reports Server (NTRS)

Andreev, V. A.; Klimov, Andrei B.; Lerner, Peter B.

1994-01-01

We define the Berry phase for the Heisenberg operators. This definition is motivated by the calculation of the phase shifts by different techniques. These techniques are: the solution of the Heisenberg equations of motion, the solution of the Schrodinger equation in coherent-state representation, and the direct computation of the evolution operator. Our definition of the Berry phase in the Heisenberg representation is consistent with the underlying supersymmetry of the model in the following sense. The structural blocks of the Hamiltonians of supersymmetrical quantum mechanics ('superpairs') are connected by transformations which conserve the similarity in structure of the energy levels of superpairs. These transformations include transformation of phase of the creation-annihilation operators, which are generated by adiabatic cyclic evolution of the parameters of the system.

10 CFR 830.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Definitions. 830.3 Section 830.3 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT § 830.3 Definitions. (a) The following definitions apply to this part.... Critical assembly means special nuclear devices designed and used to sustain nuclear reactions, which may...

VSCE technology definition study

NASA Technical Reports Server (NTRS)

Howlett, R. A.; Hunt, R. B.

1979-01-01

Refined design definition of the variable stream control engine (VSCE) concept for advanced supersonic transports is presented. Operating and performance features of the VSCE are discussed, including the engine components, thrust specific fuel consumption, weight, noise, and emission system. A preliminary engine design is presented.

The solution of the dam-break problem in the Porous Shallow water Equations

NASA Astrophysics Data System (ADS)

Cozzolino, Luca; Pepe, Veronica; Cimorelli, Luigi; D'Aniello, Andrea; Della Morte, Renata; Pianese, Domenico

2018-04-01

The Porous Shallow water Equations are commonly used to evaluate the propagation of flooding waves in the urban environment. These equations may exhibit not only classic shocks, rarefactions, and contact discontinuities, as in the ordinary two-dimensional Shallow water Equations, but also special discontinuities at abrupt porosity jumps. In this paper, an appropriate parameterization of the stationary weak solutions of one-dimensional Porous Shallow water Equations supplies the inner structure of the porosity jumps. The exact solution of the corresponding dam-break problem is presented, and six different wave configurations are individuated, proving that the solution exists and it is unique for given initial conditions and geometric characteristics. These results can be used as a benchmark in order to validate one- and two-dimensional numerical models for the solution of the Porous Shallow water Equations. In addition, it is presented a novel Finite Volume scheme where the porosity jumps are taken into account by means of a variables reconstruction approach. The dam-break results supplied by this numerical scheme are compared with the exact dam-break results, showing the promising capabilities of this numerical approach. Finally, the advantages of the novel porosity jump definition are shown by comparison with other definitions available in the literature, demonstrating its advantages, and the issues raising in real world applications are discussed.

Life sciences payload definition and integration study. Volume 1: Executive summary. [carry-on laboratory for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The definition and integration tasks involved in the development of design concepts for a carry-on laboratory (COL), to be compatible with Spacelab operations, were divided into the following study areas: (1) identification of research and equipment requirements of the COL; (2) development of a number of conceptual layouts for COL based on the defined research of final conceptual designs; and (4) development of COL planning information for definition of COL/Spacelab interface data, cost data, and program cost schedules, including design drawings of a selected COL to permit fabrication of a functional breadboard.

Systems-level study of a nonsurvivable Jupiter turbopause probe. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Wiltshire, R. S.

1972-01-01

The design of a space probe to explore the atmosphere of the planet Jupiter is discussed. Five major areas were considered: (1) definition of science requirements, (2) mission evaluation, (3) definition of probe system, (4) definition of spacecraft support requirements, and (5) nonequilibrium flow field analysis for communications blackout evaluation. The overall mission and system design are emphasized. The integration of the various technologies into complete systems designs is described. Results showed that a nonsurvivable turbopause probe mission to Jupiter with adequate data return to meet the science objectives is feasible and practical.

Steady and Unsteady Nozzle Simulations Using the Conservation Element and Solution Element Method

NASA Technical Reports Server (NTRS)

Friedlander, David Joshua; Wang, Xiao-Yen J.

2014-01-01

This paper presents results from computational fluid dynamic (CFD) simulations of a three-stream plug nozzle. Time-accurate, Euler, quasi-1D and 2D-axisymmetric simulations were performed as part of an effort to provide a CFD-based approach to modeling nozzle dynamics. The CFD code used for the simulations is based on the space-time Conservation Element and Solution Element (CESE) method. Steady-state results were validated using the Wind-US code and a code utilizing the MacCormack method while the unsteady results were partially validated via an aeroacoustic benchmark problem. The CESE steady-state flow field solutions showed excellent agreement with solutions derived from the other methods and codes while preliminary unsteady results for the three-stream plug nozzle are also shown. Additionally, a study was performed to explore the sensitivity of gross thrust computations to the control surface definition. The results showed that most of the sensitivity while computing the gross thrust is attributed to the control surface stencil resolution and choice of stencil end points and not to the control surface definition itself.Finally, comparisons between the quasi-1D and 2D-axisymetric solutions were performed in order to gain insight on whether a quasi-1D solution can capture the steady and unsteady nozzle phenomena without the cost of a 2D-axisymmetric simulation. Initial results show that while the quasi-1D solutions are similar to the 2D-axisymmetric solutions, the inability of the quasi-1D simulations to predict two dimensional phenomena limits its accuracy.

Functional definition and design of a USDA system

NASA Technical Reports Server (NTRS)

Evans, S. M.; Dario, E. R.; Dickinson, G. L. (Principal Investigator)

1979-01-01

The fundamental definition and design of a U.S.D.A. system utilizing the LACIE technology avaliable as of June 1976, is discussed. The organization and methods described are focused on LACIE technology in terms of its transfer for use applications. The simulation of a feasible system design provided timely answers to system design questions, such as the ability of a minicomputer to handle the proposed geometrical correction of MSS data.

Context management platform for tourism applications.

PubMed

Buján, David; Martín, David; Torices, Ortzi; López-de-Ipiña, Diego; Lamsfus, Carlos; Abaitua, Joseba; Alzua-Sorzabal, Aurkene

2013-06-24

The notion of context has been widely studied and there are several authors that have proposed different definitions of context. However, context has not been widely studied in the framework of human mobility and the notion of context has been imported directly from other computing fields without specifically addressing the tourism domain requirements. In order to store and manage context information a context data model and a context management platform are needed. Ontologies have been widely used in context modelling, but many of them are designed to be applied in general ubiquitous computing environments, do not contain specific concepts related to the tourism domain or some approaches do not contain enough concepts to represent context information related to the visitor on the move. That is why we propose a new approach to provide a better solution to model context data in tourism environments, adding more value to our solution reusing data about tourist resources from an Open Data repository and publishing it as Linked Data. We also propose the architecture for a context information management platform based on this context data model.

Simplifying the exploration of volumetric images: development of a 3D user interface for the radiologist's workplace.

PubMed

Teistler, M; Breiman, R S; Lison, T; Bott, O J; Pretschner, D P; Aziz, A; Nowinski, W L

2008-10-01

Volumetric imaging (computed tomography and magnetic resonance imaging) provides increased diagnostic detail but is associated with the problem of navigation through large amounts of data. In an attempt to overcome this problem, a novel 3D navigation tool has been designed and developed that is based on an alternative input device. A 3D mouse allows for simultaneous definition of position and orientation of orthogonal or oblique multiplanar reformatted images or slabs, which are presented within a virtual 3D scene together with the volume-rendered data set and additionally as 2D images. Slabs are visualized with maximum intensity projection, average intensity projection, or standard volume rendering technique. A prototype has been implemented based on PC technology that has been tested by several radiologists. It has shown to be easily understandable and usable after a very short learning phase. Our solution may help to fully exploit the diagnostic potential of volumetric imaging by allowing for a more efficient reading process compared to currently deployed solutions based on conventional mouse and keyboard.

Hazardous waste management system design under population and environmental impact considerations.

PubMed

Yilmaz, Ozge; Kara, Bahar Y; Yetis, Ulku

2017-12-01

This paper presents a multi objective mixed integer location/routing model that aims to minimize transportation cost and risks for large-scale hazardous waste management systems (HWMSs). Risks induced by hazardous wastes (HWs) on both public and the environment are addressed. For this purpose, a new environmental impact definition is proposed that considers the environmentally vulnerable elements including water bodies, agricultural areas, coastal regions and forestlands located within a certain bandwidth around transportation routes. The solution procedure yields to Pareto optimal curve for two conflicting objectives. The conceptual model developed prior to mathematical formulation addresses waste-to-technology compatibility and HW processing residues to assure applicability of the model to real-life HWMSs. The suggested model was used in a case study targeting HWMS in Turkey. Based on the proposed solution, it was possible to identify not only the transportation routes but also a set of information on HW handling facilities including the types, locations, capacities, and investment/operational cost. The HWMS of this study can be utilized both by public authorities and private sector investors for planning purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Context Management Platform for Tourism Applications

PubMed Central

Buján, David; Martín, David; Torices, Ortzi; López-de-Ipiña, Diego; Lamsfus, Carlos; Abaitua, Joseba; Alzua-Sorzabal, Aurkene

2013-01-01

The notion of context has been widely studied and there are several authors that have proposed different definitions of context. However, context has not been widely studied in the framework of human mobility and the notion of context has been imported directly from other computing fields without specifically addressing the tourism domain requirements. In order to store and manage context information a context data model and a context management platform are needed. Ontologies have been widely used in context modelling, but many of them are designed to be applied in general ubiquitous computing environments, do not contain specific concepts related to the tourism domain or some approaches do not contain enough concepts to represent context information related to the visitor on the move. That is why we propose a new approach to provide a better solution to model context data in tourism environments, adding more value to our solution reusing data about tourist resources from an Open Data repository and publishing it as Linked Data. We also propose the architecture for a context information management platform based on this context data model. PMID:23797739

Vectorization of transport and diffusion computations on the CDC Cyber 205

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abu-Shumays, I.K.

1986-01-01

The development and testing of alternative numerical methods and computational algorithms specifically designed for the vectorization of transport and diffusion computations on a Control Data Corporation (CDC) Cyber 205 vector computer are described. Two solution methods for the discrete ordinates approximation to the transport equation are summarized and compared. Factors of 4 to 7 reduction in run times for certain large transport problems were achieved on a Cyber 205 as compared with run times on a CDC-7600. The solution of tridiagonal systems of linear equations, central to several efficient numerical methods for multidimensional diffusion computations and essential for fluid flowmore » and other physics and engineering problems, is also dealt with. Among the methods tested, a combined odd-even cyclic reduction and modified Cholesky factorization algorithm for solving linear symmetric positive definite tridiagonal systems is found to be the most effective for these systems on a Cyber 205. For large tridiagonal systems, computation with this algorithm is an order of magnitude faster on a Cyber 205 than computation with the best algorithm for tridiagonal systems on a CDC-7600.« less

Self-assembly and nanosphere lithography for large-area plasmonic patterns on graphene.

PubMed

Lotito, Valeria; Zambelli, Tomaso

2015-06-01

Plasmonic structures on graphene can tailor its optical properties, which is essential for sensing and optoelectronic applications, e.g. for the enhancement of photoresponsivity of graphene photodetectors. Control over their structural and, hence, spectral properties can be attained by using electron beam lithography, which is not a viable solution for the definition of patterns over large areas. For the fabrication of large-area plasmonic nanostructures, we propose to use self-assembled monolayers of nanospheres as a mask for metal evaporation and etching processes. An optimized approach based on self-assembly at air/water interface with a properly designed apparatus allows the attainment of monolayers of hexagonally closely packed patterns with high long-range order and large area coverage; special strategies are devised in order to protect graphene against damage resulting from surface treatment and further processing steps such as reactive ion etching, which could potentially impair graphene properties. Therefore we demonstrate that nanosphere lithography is a cost-effective solution to create plasmonic patterns on graphene. Copyright © 2014 Elsevier Inc. All rights reserved.

A new algorithm for DNS of turbulent polymer solutions using the FENE-P model

NASA Astrophysics Data System (ADS)

Vaithianathan, T.; Collins, Lance; Robert, Ashish; Brasseur, James

2004-11-01

Direct numerical simulations (DNS) of polymer solutions based on the finite extensible nonlinear elastic model with the Peterlin closure (FENE-P) solve for a conformation tensor with properties that must be maintained by the numerical algorithm. In particular, the eigenvalues of the tensor are all positive (to maintain positive definiteness) and the sum is bounded by the maximum extension length. Loss of either of these properties will give rise to unphysical instabilities. In earlier work, Vaithianathan & Collins (2003) devised an algorithm based on an eigendecomposition that allows you to update the eigenvalues of the conformation tensor directly, making it easier to maintain the necessary conditions for a stable calculation. However, simple fixes (such as ceilings and floors) yield results that violate overall conservation. The present finite-difference algorithm is inherently designed to satisfy all of the bounds on the eigenvalues, and thus restores overall conservation. New results suggest that the earlier algorithm may have exaggerated the energy exchange at high wavenumbers. In particular, feedback of the polymer elastic energy to the isotropic turbulence is now greatly reduced.

24 CFR 598.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Definitions. 598.3 Section 598.3... COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General Provisions § 598.3 Definitions. In addition to the definitions of “HUD” and “Secretary” found in 24 CFR 5.100, the following...

24 CFR 598.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Definitions. 598.3 Section 598.3... COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General Provisions § 598.3 Definitions. In addition to the definitions of “HUD” and “Secretary” found in 24 CFR 5.100, the following...

24 CFR 598.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Definitions. 598.3 Section 598.3... COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General Provisions § 598.3 Definitions. In addition to the definitions of “HUD” and “Secretary” found in 24 CFR 5.100, the following...

24 CFR 598.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Definitions. 598.3 Section 598.3... COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General Provisions § 598.3 Definitions. In addition to the definitions of “HUD” and “Secretary” found in 24 CFR 5.100, the following...

24 CFR 598.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Definitions. 598.3 Section 598.3... COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General Provisions § 598.3 Definitions. In addition to the definitions of “HUD” and “Secretary” found in 24 CFR 5.100, the following...

Framework for Computer Assisted Instruction Courseware: A Case Study.

ERIC Educational Resources Information Center

Betlach, Judith A.

1987-01-01

Systematically investigates, defines, and organizes variables related to production of internally designed and implemented computer assisted instruction (CAI) courseware: special needs of users; costs; identification and definition of realistic training needs; CAI definition and design methodology; hardware and software requirements; and general…

Mobile platform for treatment of stroke: A case study of tele-assistance

PubMed Central

Torres Zenteno, Arturo Henry; Fernández, Francisco; Palomino-García, Alfredo; Moniche, Francisco; Escudero, Irene; Jiménez-Hernández, M Dolores; Caballero, Auxiliadora; Escobar-Rodriguez, Germán; Parra, Carlos

2015-01-01

This article presents the technological solution of a tele-assistance process for stroke patients in acute phase in the Seville metropolitan area. The main objective of this process is to reduce time from symptom onset to treatment of acute phase stroke patients by means of telemedicine, regarding mobility between an intensive care unit ambulance and an expert center and activating the pre-hospital care phase. The technological platform covering the process has been defined following an interoperability model based on standards and with a focus on service-oriented architecture focus. Messaging definition has been designed according to the reference model of the CEN/ISO 13606, messages content follows the structure of archetypes. An XDS-b (Cross-Enterprise Document Sharing-b) transaction messaging has been designed according to Integrating the Healthcare Enterprise profile for archetype notifications and update enquiries.This research has been performed by a multidisciplinary group. The Virgen del Rocío University Hospital acts as Reference Hospital and the Public Company for Healthcare as mobility surroundings. PMID:25975806

An innovative approach to compensator design

NASA Technical Reports Server (NTRS)

Mitchell, J. R.

1972-01-01

The primary goal is to present for a control system a computer-aided-compensator design technique from a frequency domain point of view. The thesis for developing this technique is to describe the open loop frequency response by n discrete frequency points which result in n functions of the compensator coefficients. Several of these functions are chosen so that the system specifications are properly portrayed; then mathematical programming is used to improve all of these functions which have values below minimum standards. In order to do this several definitions in regard to measuring the performance of a system in the frequency domain are given. Next, theorems which govern the number of compensator coefficients necessary to make improvements in a certain number of functions are proved. After this a mathematical programming tool for aiding in the solution of the problem is developed. Then for applying the constraint improvement algorithm generalized gradients for the constraints are derived. Finally, the necessary theory is incorporated in a computer program called CIP (compensator improvement program).

Projected role of advanced computational aerodynamic methods at the Lockheed-Georgia company

NASA Technical Reports Server (NTRS)

Lores, M. E.

1978-01-01

Experience with advanced computational methods being used at the Lockheed-Georgia Company to aid in the evaluation and design of new and modified aircraft indicates that large and specialized computers will be needed to make advanced three-dimensional viscous aerodynamic computations practical. The Numerical Aerodynamic Simulation Facility should be used to provide a tool for designing better aerospace vehicles while at the same time reducing development costs by performing computations using Navier-Stokes equations solution algorithms and permitting less sophisticated but nevertheless complex calculations to be made efficiently. Configuration definition procedures and data output formats can probably best be defined in cooperation with industry, therefore, the computer should handle many remote terminals efficiently. The capability of transferring data to and from other computers needs to be provided. Because of the significant amount of input and output associated with 3-D viscous flow calculations and because of the exceedingly fast computation speed envisioned for the computer, special attention should be paid to providing rapid, diversified, and efficient input and output.

Crew interface specification development study for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Carl, J. G.

1971-01-01

The need and potential solutions for an orderly systems engineering approach to the definition, management and documentation requirements for in-flight maintenance, assembly, servicing, and stowage process activities of the flight crews of future spacecraft were investigated. These processes were analyzed and described using a new technique (mass/function flow diagramming), developed during the study, to give visibility to crew functions and supporting requirements, including data products. This technique is usable by NASA for specification baselines and can assist the designer in identifying both upper and lower level requirements associated with these processes. These diagrams provide increased visibility into the relationships between functions and related equipments being utilized and managed and can serve as a common communicating vehicle between the designer, program management, and the operational planner. The information and data product requirements to support the above processes were identified along with optimum formats and contents of these products. The resulting data product concepts are presented to support these in-flight maintenance and stowage processes.

Connecting Requirements to Architecture and Analysis via Model-Based Systems Engineering

NASA Technical Reports Server (NTRS)

Cole, Bjorn F.; Jenkins, J. Steven

2015-01-01

In traditional systems engineering practice, architecture, concept development, and requirements development are related but still separate activities. Concepts for operation, key technical approaches, and related proofs of concept are developed. These inform the formulation of an architecture at multiple levels, starting with the overall system composition and functionality and progressing into more detail. As this formulation is done, a parallel activity develops a set of English statements that constrain solutions. These requirements are often called "shall statements" since they are formulated to use "shall." The separation of requirements from design is exacerbated by well-meaning tools like the Dynamic Object-Oriented Requirements System (DOORS) that remained separated from engineering design tools. With the Europa Clipper project, efforts are being taken to change the requirements development approach from a separate activity to one intimately embedded in formulation effort. This paper presents a modeling approach and related tooling to generate English requirement statements from constraints embedded in architecture definition.

Evolution of robotic arms.

PubMed

Moran, Michael E

2007-01-01

The foundation of surgical robotics is in the development of the robotic arm. This is a thorough review of the literature on the nature and development of this device with emphasis on surgical applications. We have reviewed the published literature and classified robotic arms by their application: show, industrial application, medical application, etc. There is a definite trend in the manufacture of robotic arms toward more dextrous devices, more degrees-of-freedom, and capabilities beyond the human arm. da Vinci designed the first sophisticated robotic arm in 1495 with four degrees-of-freedom and an analog on-board controller supplying power and programmability. von Kemplen's chess-playing automaton left arm was quite sophisticated. Unimate introduced the first industrial robotic arm in 1961, it has subsequently evolved into the PUMA arm. In 1963 the Rancho arm was designed; Minsky's Tentacle arm appeared in 1968, Scheinman's Stanford arm in 1969, and MIT's Silver arm in 1974. Aird became the first cyborg human with a robotic arm in 1993. In 2000 Miguel Nicolalis redefined possible man-machine capacity in his work on cerebral implantation in owl-monkeys directly interfacing with robotic arms both locally and at a distance. The robotic arm is the end-effector of robotic systems and currently is the hallmark feature of the da Vinci Surgical System making its entrance into surgical application. But, despite the potential advantages of this computer-controlled master-slave system, robotic arms have definite limitations. Ongoing work in robotics has many potential solutions to the drawbacks of current robotic surgical systems.

System design from mission definition to flight validation

NASA Technical Reports Server (NTRS)

Batill, S. M.

1992-01-01

Considerations related to the engineering systems design process and an approach taken to introduce undergraduate students to that process are presented. The paper includes details on a particular capstone design course. This course is a team oriented aircraft design project which requires the students to participate in many phases of the system design process, from mission definition to validation of their design through flight testing. To accomplish this in a single course requires special types of flight vehicles. Relatively small-scale, remotely piloted vehicles have provided the class of aircraft considered in this course.

Exact solutions of fractional mBBM equation and coupled system of fractional Boussinesq-Burgers

NASA Astrophysics Data System (ADS)

Javeed, Shumaila; Saif, Summaya; Waheed, Asif; Baleanu, Dumitru

2018-06-01

The new exact solutions of nonlinear fractional partial differential equations (FPDEs) are established by adopting first integral method (FIM). The Riemann-Liouville (R-L) derivative and the local conformable derivative definitions are used to deal with the fractional order derivatives. The proposed method is applied to get exact solutions for space-time fractional modified Benjamin-Bona-Mahony (mBBM) equation and coupled time-fractional Boussinesq-Burgers equation. The suggested technique is easily applicable and effectual which can be implemented successfully to obtain the solutions for different types of nonlinear FPDEs.

Solutions for characterising natural landscapes in New Zealand using geographical information systems.

PubMed

Brabyn, Lars

2005-07-01

This paper explores solutions for characterising naturalness in relation to visual landscapes using Geographical Information System (GIS). It is argued that planners need to identify natural landscapes and monitor changes in their extent. Just like the indices that have been developed to describe the state of the economy, indices need to be developed that monitor the state of natural landscapes. The complications in characterising natural landscapes are outlined but it is argued that there is a need to develop definitions of natural landscapes that can be operationalised with a GIS. This will have the advantages of the efficiency of the technology and that the definition will be explicit and the implementation will be independent of the operator. Several GIS solutions are provided and these are an analysis of landcover, a density analysis of roads and utilities, and an analysis of property sizes. The analysis of property sizes is sensitive to many human modifications of the landscape because many developments begin with the subdivision of properties. However, it is argued in this paper that no one definition will suffice and that all three methods provide different, yet important, insights into natural landscape character. An aggregate classification of naturalness based on the majority value of the indices is demonstrated as well as a range of techniques for expressing the uncertainty of the aggregate classification.

Multi Objective Controller Design for Linear System via Optimal Interpolation

NASA Technical Reports Server (NTRS)

Ozbay, Hitay

1996-01-01

We propose a methodology for the design of a controller which satisfies a set of closed-loop objectives simultaneously. The set of objectives consists of: (1) pole placement, (2) decoupled command tracking of step inputs at steady-state, and (3) minimization of step response transients with respect to envelope specifications. We first obtain a characterization of all controllers placing the closed-loop poles in a prescribed region of the complex plane. In this characterization, the free parameter matrix Q(s) is to be determined to attain objectives (2) and (3). Objective (2) is expressed as determining a Pareto optimal solution to a vector valued optimization problem. The solution of this problem is obtained by transforming it to a scalar convex optimization problem. This solution determines Q(O) and the remaining freedom in choosing Q(s) is used to satisfy objective (3). We write Q(s) = (l/v(s))bar-Q(s) for a prescribed polynomial v(s). Bar-Q(s) is a polynomial matrix which is arbitrary except that Q(O) and the order of bar-Q(s) are fixed. Obeying these constraints bar-Q(s) is now to be 'shaped' to minimize the step response characteristics of specific input/output pairs according to the maximum envelope violations. This problem is expressed as a vector valued optimization problem using the concept of Pareto optimality. We then investigate a scalar optimization problem associated with this vector valued problem and show that it is convex. The organization of the report is as follows. The next section includes some definitions and preliminary lemmas. We then give the problem statement which is followed by a section including a detailed development of the design procedure. We then consider an aircraft control example. The last section gives some concluding remarks. The Appendix includes the proofs of technical lemmas, printouts of computer programs, and figures.

Transsexualism: a legal perspective.

PubMed Central

Thomson, J M

1980-01-01

This paper begins with a discussion of the current legal definition of sex laid down in Corbett v Corbett. The implications of this test for three areas of the law, marriage, birth certificates and employment are then examined. Solutions from the United States of America and West Germany are studied and the suitability of similar solutions being transplanted into British law discussed. PMID:7420377

Eigenvectors phase correction in inverse modal problem

NASA Astrophysics Data System (ADS)

Qiao, Guandong; Rahmatalla, Salam

2017-12-01

The solution of the inverse modal problem for the spatial parameters of mechanical and structural systems is heavily dependent on the quality of the modal parameters obtained from the experiments. While experimental and environmental noises will always exist during modal testing, the resulting modal parameters are expected to be corrupted with different levels of noise. A novel methodology is presented in this work to mitigate the errors in the eigenvectors when solving the inverse modal problem for the spatial parameters. The phases of the eigenvector component were utilized as design variables within an optimization problem that minimizes the difference between the calculated and experimental transfer functions. The equation of motion in terms of the modal and spatial parameters was used as a constraint in the optimization problem. Constraints that reserve the positive and semi-positive definiteness and the inter-connectivity of the spatial matrices were implemented using semi-definite programming. Numerical examples utilizing noisy eigenvectors with augmented Gaussian white noise of 1%, 5%, and 10% were used to demonstrate the efficacy of the proposed method. The results showed that the proposed method is superior when compared with a known method in the literature.

40 CFR 428.11 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., oils, chemical compounds, fabric and wire used in the manufacture of pneumatic tires and inner tubes or... constructed before 1959, discharges from the following: Soapstone solution applications; steam cleaning...

Using Differentials to Differentiate Trigonometric and Exponential Functions

ERIC Educational Resources Information Center

Dray, Tevian

2013-01-01

Starting from geometric definitions, we show how differentials can be used to differentiate trigonometric and exponential functions without limits, numerical estimates, solutions of differential equations, or integration.

Construction of Mathematical Definitions: An Epistemological and Didactical Study

ERIC Educational Resources Information Center

Ouvrier-Buffet, Cecile

2004-01-01

The definition-construction process is central to mathematics. The aim of this paper is to propose a few Situations of Definition-Construction (called SDC) and to study them. Our main objectives are to describe the definition-construction process and to design SDC for classroom. A SDC on "discrete straight line" and its mathematical and…

Implementation of a Goal-Based Systems Engineering Process Using the Systems Modeling Language (SysML)

NASA Technical Reports Server (NTRS)

Patterson, Jonathan D.; Breckenridge, Jonathan T.; Johnson, Stephen B.

2013-01-01

Building upon the purpose, theoretical approach, and use of a Goal-Function Tree (GFT) being presented by Dr. Stephen B. Johnson, described in a related Infotech 2013 ISHM abstract titled "Goal-Function Tree Modeling for Systems Engineering and Fault Management", this paper will describe the core framework used to implement the GFTbased systems engineering process using the Systems Modeling Language (SysML). These two papers are ideally accepted and presented together in the same Infotech session. Statement of problem: SysML, as a tool, is currently not capable of implementing the theoretical approach described within the "Goal-Function Tree Modeling for Systems Engineering and Fault Management" paper cited above. More generally, SysML's current capabilities to model functional decompositions in the rigorous manner required in the GFT approach are limited. The GFT is a new Model-Based Systems Engineering (MBSE) approach to the development of goals and requirements, functions, and its linkage to design. As a growing standard for systems engineering, it is important to develop methods to implement GFT in SysML. Proposed Method of Solution: Many of the central concepts of the SysML language are needed to implement a GFT for large complex systems. In the implementation of those central concepts, the following will be described in detail: changes to the nominal SysML process, model view definitions and examples, diagram definitions and examples, and detailed SysML construct and stereotype definitions.

[Traumas in road accidents].

PubMed

Picardi, Nicola

2005-01-01

Road accidents are nowadays one of the most important cause of injuries, deaths and definitive invalidity, except the war casualties. All the developed countries are affected by this problems, and all the efforts are in progress to make aware the people, mostly the drivers, of all the possible preventive measures. Not all the accident are per se cause of death or invalidity, and there are a lot of evitable deaths and definite morbidity, but an incongruous help can worsen the outcome or menace the final validity and life itself. The injuries affect in different ways the driver and the passenger, and the same safety devices designed to protect the travellers, as safety belts and air bags, can hit them with peculiar mechanisms. A particular attention must be paid to the children, too often transported without the correct safety measures. Very important are the correct steps of the first aid, the succession of the treatment manoeuvres, and the environment were the patients can and must be treated. The Trauma Center represents an ideal solution for the best treatment, but its organization is far from simple, particularly in our country so different in the various regions as population, road, towns and villages distribution, especially in the mountainous districts. Every effort must be done to organize al the best the first, second and definite aid and treatment, together with the active and passive safety devices, and with a correct road education, to stop the true epidemic impact of the road accidents.

Physical activity self-definition among adolescents.

PubMed

Robbins, Lorraine B; Pis, Monika B; Pender, Nola J; Kazanis, Anamaria S

2004-01-01

Since research involving adults indicates that physical activity (PA) self-definition influences PA participation, understanding PA self-definition and related factors, such as PA frequency and enjoyment, in youth is essential for designing interventions to reverse the decline in PA that occurs from childhood through adolescence. The objective of this study was to explore correlates of PA self-definition and assess differences in PA self-definition among African American and European American boys and girls in early, middle, and late puberty. A 3 (developmental stage) x 2 (gender) design was used. African American and European American boys and girls, ages 9 to 17, participated. A total of 168 adolescents completed demographic data, developmental stage, and current and future PA self-definition questionnaires. Peak VO2 was obtained as a measure of physical fitness. Current PA self-definition was positively correlated with peak VO2 (p < .01) and future PA self-definition (p <.01). Males had higher current (p = .032) and future (p = .021) PA self-definition than females. The finding that boys have stronger current and future PA self-definitions than girls highlights the challenge for health professionals to enact immediate and effective measures to alter girls' perceptions of themselves in terms of PA participation. Since current PA self-definition is also significantly correlated with future PA participation, strategies to assist girls in developing a strong PA self-definition may contribute to increased PA in their adult years.

Reproducible Large-Scale Neuroimaging Studies with the OpenMOLE Workflow Management System.

PubMed

Passerat-Palmbach, Jonathan; Reuillon, Romain; Leclaire, Mathieu; Makropoulos, Antonios; Robinson, Emma C; Parisot, Sarah; Rueckert, Daniel

2017-01-01

OpenMOLE is a scientific workflow engine with a strong emphasis on workload distribution. Workflows are designed using a high level Domain Specific Language (DSL) built on top of Scala. It exposes natural parallelism constructs to easily delegate the workload resulting from a workflow to a wide range of distributed computing environments. OpenMOLE hides the complexity of designing complex experiments thanks to its DSL. Users can embed their own applications and scale their pipelines from a small prototype running on their desktop computer to a large-scale study harnessing distributed computing infrastructures, simply by changing a single line in the pipeline definition. The construction of the pipeline itself is decoupled from the execution context. The high-level DSL abstracts the underlying execution environment, contrary to classic shell-script based pipelines. These two aspects allow pipelines to be shared and studies to be replicated across different computing environments. Workflows can be run as traditional batch pipelines or coupled with OpenMOLE's advanced exploration methods in order to study the behavior of an application, or perform automatic parameter tuning. In this work, we briefly present the strong assets of OpenMOLE and detail recent improvements targeting re-executability of workflows across various Linux platforms. We have tightly coupled OpenMOLE with CARE, a standalone containerization solution that allows re-executing on a Linux host any application that has been packaged on another Linux host previously. The solution is evaluated against a Python-based pipeline involving packages such as scikit-learn as well as binary dependencies. All were packaged and re-executed successfully on various HPC environments, with identical numerical results (here prediction scores) obtained on each environment. Our results show that the pair formed by OpenMOLE and CARE is a reliable solution to generate reproducible results and re-executable pipelines. A demonstration of the flexibility of our solution showcases three neuroimaging pipelines harnessing distributed computing environments as heterogeneous as local clusters or the European Grid Infrastructure (EGI).

Reproducible Large-Scale Neuroimaging Studies with the OpenMOLE Workflow Management System

PubMed Central

Passerat-Palmbach, Jonathan; Reuillon, Romain; Leclaire, Mathieu; Makropoulos, Antonios; Robinson, Emma C.; Parisot, Sarah; Rueckert, Daniel

2017-01-01

OpenMOLE is a scientific workflow engine with a strong emphasis on workload distribution. Workflows are designed using a high level Domain Specific Language (DSL) built on top of Scala. It exposes natural parallelism constructs to easily delegate the workload resulting from a workflow to a wide range of distributed computing environments. OpenMOLE hides the complexity of designing complex experiments thanks to its DSL. Users can embed their own applications and scale their pipelines from a small prototype running on their desktop computer to a large-scale study harnessing distributed computing infrastructures, simply by changing a single line in the pipeline definition. The construction of the pipeline itself is decoupled from the execution context. The high-level DSL abstracts the underlying execution environment, contrary to classic shell-script based pipelines. These two aspects allow pipelines to be shared and studies to be replicated across different computing environments. Workflows can be run as traditional batch pipelines or coupled with OpenMOLE's advanced exploration methods in order to study the behavior of an application, or perform automatic parameter tuning. In this work, we briefly present the strong assets of OpenMOLE and detail recent improvements targeting re-executability of workflows across various Linux platforms. We have tightly coupled OpenMOLE with CARE, a standalone containerization solution that allows re-executing on a Linux host any application that has been packaged on another Linux host previously. The solution is evaluated against a Python-based pipeline involving packages such as scikit-learn as well as binary dependencies. All were packaged and re-executed successfully on various HPC environments, with identical numerical results (here prediction scores) obtained on each environment. Our results show that the pair formed by OpenMOLE and CARE is a reliable solution to generate reproducible results and re-executable pipelines. A demonstration of the flexibility of our solution showcases three neuroimaging pipelines harnessing distributed computing environments as heterogeneous as local clusters or the European Grid Infrastructure (EGI). PMID:28381997

40 CFR 1039.801 - What definitions apply to this part?

Code of Federal Regulations, 2014 CFR

2014-07-01

... operation in water. Auxiliary emission-control device means any element of design that senses temperature... suppression operations. Emission-control system means any device, system, or element of design that controls... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Definitions...

77 FR 52253 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

...-7017(a) to add Armenia to the definition of ``Designated country'', which was inadvertently omitted... other limitations on their use. * * * * * PART 230--COST ACCOUNTING STANDARDS ADMINISTRATION 0 7. The...) definition of ``Designated country'' at paragraph (i) by adding the country of Armenia within the parentheses...

School Students' Conceptions about Biodiversity Loss: Definitions, Reasons, Results and Solutions

NASA Astrophysics Data System (ADS)

Kilinc, Ahmet; Yeşiltaş, Namik Kemal; Kartal, Tezcan; Demiral, Ümit; Eroğlu, Baris

2013-12-01

Environmental degradation stemming from anthropocentric causes threatens the biodiversity more than ever before, leading scholars to warn governments about the impending consequences of biodiversity loss (BL). At this point, it is of great importance to study the public's conceptions of BL in order to identify significant educational implications. However, a review of the literature reveals a relatively small body of research about the public understanding of BL. In this qualitative study, we thus strived to elicit Turkish school students' conceptions about BL using a written questionnaire including open-ended questions with respect to the definition of biodiversity as well as reasons for, results of and solutions to BL. The sample consisted of 245 school students in a relatively small city. A two-staged content analysis was run on the responses. The results showed that school students most commonly preferred species-focused definitions of biodiversity and understood BL through such various conceptual patterns as, `balance of nature', `forest', `global warming', `hunting' and `indirect conservation'. At the end of the paper, the possible educational implications and future perspectives were discussed.

Requirements and Solutions for Personalized Health Systems.

PubMed

Blobel, Bernd; Ruotsalainen, Pekka; Lopez, Diego M; Oemig, Frank

2017-01-01

Organizational, methodological and technological paradigm changes enable a precise, personalized, predictive, preventive and participative approach to health and social services supported by multiple actors from different domains at diverse level of knowledge and skills. Interoperability has to advance beyond Information and Communication Technologies (ICT) concerns, including the real world business domains and their processes, but also the individual context of all actors involved. The paper introduces and compares personalized health definitions, summarizes requirements and principles for pHealth systems, and considers intelligent interoperability. It addresses knowledge representation and harmonization, decision intelligence, and usability as crucial issues in pHealth. On this basis, a system-theoretical, ontology-based, policy-driven reference architecture model for open and intelligent pHealth ecosystems and its transformation into an appropriate ICT design and implementation is proposed.

Efficient reanalysis of structures by a direct modification method. [local stiffness modifications of large structures

NASA Technical Reports Server (NTRS)

Raibstein, A. I.; Kalev, I.; Pipano, A.

1976-01-01

A procedure for the local stiffness modifications of large structures is described. It enables structural modifications without an a priori definition of the changes in the original structure and without loss of efficiency due to multiple loading conditions. The solution procedure, implemented in NASTRAN, involved the decomposed stiffness matrix and the displacement vectors of the original structure. It solves the modified structure exactly, irrespective of the magnitude of the stiffness changes. In order to investigate the efficiency of the present procedure and to test its applicability within a design environment, several real and large structures were solved. The results of the efficiency studies indicate that the break-even point of the procedure varies between 8% and 60% stiffness modifications, depending upon the structure's characteristics and the options employed.

Analysis of methods for growth detection in the search for extraterrestrial life.

PubMed

Merek, E L; Oyama, V I

1968-05-01

In the search for life on other planets, experiments designed to detect the growth of microorganisms may prove to be definitive when coupled with chemical characterization and metabolic experiments. If organisms are not abundant, growth provides the only means for obtaining a large mass of biological material suitable for chemical compositional analyses and metabolic assays. Several methods of monitoring growth are described. Of these, optical monitoring in a unique system free of soil particles is advanced as the most appropriate. Theoretical problems related to the formulation of culture media are discussed, and several possible solutions are proposed. The sampling system, the type of monitoring, the size and placement of inoculum, and the medium volume and composition are contingent upon one another and must be integrated without sacrifice to the biological demands.

High-definition polymeric membranes: construction of 3D lithographed channel arrays through control of natural building blocks dynamics.

PubMed

Speranza, Valentina; Trotta, Francesco; Drioli, Enrico; Gugliuzza, Annarosa

2010-02-01

The fabrication of well-defined interfaces is in high demand in many fields of biotechnologies. Here, high-definition membrane-like arrays are developed through the self-assembly of water droplets, which work as natural building blocks for the construction of ordered channels. Solution viscosity together with the dynamics of the water droplets can decide the final formation of three-dimensional well-ordered patterns resembling anodic structures, especially because solvents denser than water are used. Particularly, the polymer solution viscosity is demonstrated to be a powerful tool for control of the mobility of submerged droplets during the microfabrication process. The polymeric patterns are structured at very high levels of organization and exhibit well-established transport-surface property relationships, considered basics for any types of advanced biotechnologies.

Hybrid Propulsion Technology Program, phase 1. Volume 2: Technical discussion

NASA Technical Reports Server (NTRS)

1989-01-01

Information on hybrid propulsion system concepts is given largely in the form of outlines, charts and graphs. Included are the concept definition, trade study data generation, concept evaluation and selection, conceptual design definition, and technology definition.

Streak camera receiver definition study

NASA Technical Reports Server (NTRS)

Johnson, C. B.; Hunkler, L. T., Sr.; Letzring, S. A.; Jaanimagi, P.

1990-01-01

Detailed streak camera definition studies were made as a first step toward full flight qualification of a dual channel picosecond resolution streak camera receiver for the Geoscience Laser Altimeter and Ranging System (GLRS). The streak camera receiver requirements are discussed as they pertain specifically to the GLRS system, and estimates of the characteristics of the streak camera are given, based upon existing and near-term technological capabilities. Important problem areas are highlighted, and possible corresponding solutions are discussed.

SEDS experiment design definition

NASA Technical Reports Server (NTRS)

Carroll, Joseph A.; Alexander, Charles M.; Oldson, John C.

1990-01-01

The Small Expendable-tether Deployment System (SEDS) was developed to design, build, integrate, fly, and safely deploy and release an expendable tether. A suitable concept for an on-orbit test of SEDS was developed. The following tasks were performed: (1) Define experiment objectives and requirements; (2) Define experiment concepts to reach those objectives; (3) Support NASA in experiment concept selection and definition; (4) Perform analyses and tests of SEDS hardware; (5) Refine the selected SEDS experiment concept; and (6) Support interactive SEDS system definition process. Results and conclusions are given.

EOS image data processing system definition study

NASA Technical Reports Server (NTRS)

Gilbert, J.; Honikman, T.; Mcmahon, E.; Miller, E.; Pietrzak, L.; Yorsz, W.

1973-01-01

The Image Processing System (IPS) requirements and configuration are defined for NASA-sponsored advanced technology Earth Observatory System (EOS). The scope included investigation and definition of IPS operational, functional, and product requirements considering overall system constraints and interfaces (sensor, etc.) The scope also included investigation of the technical feasibility and definition of a point design reflecting system requirements. The design phase required a survey of present and projected technology related to general and special-purpose processors, high-density digital tape recorders, and image recorders.

Multibunch solutions of the differential-difference equation for traffic flow

PubMed

Nakanishi

2000-09-01

The Newell-Whitham type of car-following model, with a hyperbolic tangent as the optimal velocity function, has a finite number of exact steady traveling wave solutions that can be expressed in terms of elliptic theta functions. Each such solution describes a density wave with a definite number of car bunches on a circuit. In our numerical simulations, we observe a transition process from uniform flow to congested flow described by a one-bunch analytic solution, which appears to be an attractor of the system. In this process, the system exhibits a series of transitions through which it comes to assume configurations closely approximating multibunch solutions with successively fewer bunches.

40 CFR 1039.801 - What definitions apply to this part?

Code of Federal Regulations, 2012 CFR

2012-07-01

... operation in water. Auxiliary emission-control device means any element of design that senses temperature... element of design that controls or reduces the emissions of regulated pollutants from an engine. Emission... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Definitions...

40 CFR 1039.801 - What definitions apply to this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... operation in water. Auxiliary emission-control device means any element of design that senses temperature... element of design that controls or reduces the emissions of regulated pollutants from an engine. Emission... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Definitions...

78 FR 22659 - Revisions to the Export Administration Regulations: Initial Implementation of Export Control Reform

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... Designed'' Definition B. Other Definitions XXIV. Part 774--The Commerce Control List A. Product Group... Changes H. Country Groups XII. Part 742--Control Policy A. National Security (NS) Review Policy B...-all controls on parts, components, accessories, and attachments specifically designed or modified for...

40 CFR 1039.801 - What definitions apply to this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... operation in water. Auxiliary emission-control device means any element of design that senses temperature... element of design that controls or reduces the emissions of regulated pollutants from an engine. Emission... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Definitions...

41 CFR 102-85.35 - What definitions apply to this part?

Code of Federal Regulations, 2011 CFR

2011-01-01

..., due to its layout, design, location, or other characteristics, is unlikely to be needed by another GSA... professional techniques of planning, layout and interior design to determine the best internal location and the... definition of “tenant improvement.” Initial space layout means the specific placement of workstations...

41 CFR 102-85.35 - What definitions apply to this part?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., due to its layout, design, location, or other characteristics, is unlikely to be needed by another GSA... professional techniques of planning, layout and interior design to determine the best internal location and the... definition of “tenant improvement.” Initial space layout means the specific placement of workstations...

41 CFR 102-85.35 - What definitions apply to this part?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., due to its layout, design, location, or other characteristics, is unlikely to be needed by another GSA... professional techniques of planning, layout and interior design to determine the best internal location and the... definition of “tenant improvement.” Initial space layout means the specific placement of workstations...

41 CFR 102-85.35 - What definitions apply to this part?

Code of Federal Regulations, 2014 CFR

2014-01-01

..., due to its layout, design, location, or other characteristics, is unlikely to be needed by another GSA... professional techniques of planning, layout and interior design to determine the best internal location and the... definition of “tenant improvement.” Initial space layout means the specific placement of workstations...

40 CFR 203.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or equipment which are designed for research, experimental or developmental work to be performed by... Administrator, any other machinery or equipment designed for use in experimental work done by or for the Federal... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Definitions. 203.1 Section 203.1...

23 CFR 772.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF HIGHWAY TRAFFIC NOISE AND CONSTRUCTION NOISE § 772.5 Definitions. (a) Design year. The future year used to estimate the probable traffic volume for which a highway is designed. A time, 10 to 20 years... the natural and mechanical sources and human activity, considered to be usually present in a...

40 CFR 59.680 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... design that controls or reduces the regulated evaporative emissions from. Emission-data unit means a... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Definitions and... amended, 42 U.S.C. 7401-7671q. Adjustable parameter means any device, system, or element of design that...

Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 7: System/subsystems requirements databook

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1981-01-01

This volume summarizes the basic requirements used as a guide to systems analysis, and is a basis for the selection of candidate Satellite Power Systems (SPS) point designs. Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured, these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point designs. Included is an updated version of earlier Rockwell concepts using klystrons as the specific microwave power amplification approach, as well as a more in-depth definition, analysis and preliminary point design on two concepts based on the use of advanced solid state technology to accomplish the task of high power amplification of the 2.45 GHz transmitted power beam to the Earth receiver. Finally, a preliminary definition of a concept using magnetrons as the microwave power amplifiers is presented.

76 FR 70368 - Disaster Designation Process

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... two steps for natural disasters, including special provisions for certain drought situations. FSA.... Proposed Change in Natural Disaster Definition Under the current regulations, producers with eligible... in 7 CFR 759.3 a definition of ``natural disaster'' that is consistent with the definition of...

48 CFR 32.801 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 32.801 Section 32.801 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Assignment of Claims 32.801 Definitions. Designated agency, as used in this...

Travellers' diarrhoea: Impact of TD definition and control group design on study results.

PubMed

Lääveri, Tinja; Pakkanen, Sari H; Kirveskari, Juha; Kantele, Anu

2018-02-02

Travellers' diarrhoea (TD) is a common health problem among visitors to the (sub)tropics. Much research deals with aetiology, prevention, and post-infection sequalae, yet the data may not allow comparisons due to incompatible definitions of TD and No TD control groups. The impact of defining TD and No TD control groups was explored by revisiting our recent data. We set up two TD groups: classical TD i.e. ≥3 loose or liquid stools/day and WHO TD (diarrhoea as defined by the WHO) i.e. any diarrhoea, and four No TD groups by TD definition and timing (no classical/WHO TD during travel, no ongoing classical/WHO TD). TD was recorded for 37% versus 65% of subjects when using classical versus WHO definitions, respectively; the proportions of the various pathogens proved similar. The strictest criterion for the No TD control group (no WHO TD during travel) yielded pathogens among 61% and the least strict (no ongoing classical TD) among 73% of the travellers; the differences were greatest for enteroaggregative Escherichia coli and Campylobacter. Definition of TD and control group design substantially impact on TD study results. The WHO definition yields more cases, but the pathogen selection is similar by both definitions. Design of the No TD control group was found critical: only those remaining asymptomatic throughout the journey should be included. Copyright © 2018 Elsevier Ltd. All rights reserved.

Value Engineering Synergies with Lean Six Sigma

DTIC Science & Technology

2010-09-01

understanding the problem, developing solutions, and evalu- ating pros and cons of the solutions. The paramount considerations are getting enough facts and...parts or labor operations. Functions are defined for every element of the product or process that con - sumes resources. The functions are typically...shoot bullets, detect movement, and so forth). A work function establishes quantitative statements. Functional definitions con - taining a verb and a

40 CFR 409.21 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Crystalline Cane Sugar Refining Subcategory § 409.21... (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

40 CFR 409.21 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Crystalline Cane Sugar Refining Subcategory § 409.21... (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

21 CFR 155.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Solids in Tomato Products Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20... found (sucrose value from the refractive index tables) and multiply the difference by 1.016. The...

40 CFR 409.21 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Crystalline Cane Sugar Refining Subcategory § 409.21... (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

40 CFR 409.21 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Crystalline Cane Sugar Refining Subcategory § 409.21... (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

40 CFR 413.71 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... deposition of conductive material from an autocatalytic plating solution without application of electrical current. (c) The term operation shall mean any step in the electroless plating process in which a metal is...

Are dialysis adequacy indices independent of solute generation rate?

PubMed

Waniewski, Jacek; Debowska, Malgorzata; Lindholm, Bengt

2014-01-01

KT/V is by definition independent of solute generation rate. Alternative dialysis adequacy indices (DAIs) such as equivalent renal clearance (EKR), standard KT/V (stdKT/V), and solute removal index (SRI) are estimated as the ratio of solute mass removed to an average solute mass in the body or solute concentration in blood; both nominator and denominator in these formulas depend on the solute generation rate. Our objective was to investigate whether and under which conditions the alternative DAIs are independent of solute generation rate. By using general compartment modeling, we show that for the metabolically stable patient (in whom the solute generated during the dialysis cycle, typically, 1 week, is equal to the solute removed from the body), DAIs estimated for the dialysis cycle are in general independent of the average solute generation rate (although they may depend on the pattern of oscillations in the generation rate). However, the alternative adequacy parameters (such as EKR, stdKT/V, and SRI) may depend on solute generation rate for metabolically unstable patients.

A structural equation model of soil metal bioavailability to earthworms: confronting causal theory and observations using a laboratory exposure to field-contaminated soils.

PubMed

Beaumelle, Léa; Vile, Denis; Lamy, Isabelle; Vandenbulcke, Franck; Gimbert, Frédéric; Hedde, Mickaël

2016-11-01

Structural equation models (SEM) are increasingly used in ecology as multivariate analysis that can represent theoretical variables and address complex sets of hypotheses. Here we demonstrate the interest of SEM in ecotoxicology, more precisely to test the three-step concept of metal bioavailability to earthworms. The SEM modeled the three-step causal chain between environmental availability, environmental bioavailability and toxicological bioavailability. In the model, each step is an unmeasured (latent) variable reflected by several observed variables. In an exposure experiment designed specifically to test this SEM for Cd, Pb and Zn, Aporrectodea caliginosa was exposed to 31 agricultural field-contaminated soils. Chemical and biological measurements used included CaC12-extractable metal concentrations in soils, free ion concentration in soil solution as predicted by a geochemical model, dissolved metal concentration as predicted by a semi-mechanistic model, internal metal concentrations in total earthworms and in subcellular fractions, and several biomarkers. The observations verified the causal definition of Cd and Pb bioavailability in the SEM, but not for Zn. Several indicators consistently reflected the hypothetical causal definition and could thus be pertinent measurements of Cd and Pb bioavailability to earthworm in field-contaminated soils. SEM highlights that the metals present in the soil solution and easily extractable are not the main source of available metals for earthworms. This study further highlights SEM as a powerful tool that can handle natural ecosystem complexity, thus participating to the paradigm change in ecotoxicology from a bottom-up to a top-down approach. Copyright © 2016 Elsevier B.V. All rights reserved.

Immediate provisionalization with a CAD/CAM interim abutment and crown: a guided soft tissue healing technique.

PubMed

Proussaefs, Periklis

2015-02-01

A technique is described in which a single interim abutment and crown were fabricated in advance and placed the day of dental implant surgery. The contours of the interim crown were identical to the contours of a tentatively designed definitive prosthesis and allowed the tissue to heal and obtain contours that accommodated the contours of the definitive prosthesis. After osseointegration was established, a definitive impression was made with a custom computer-assisted design and computer-assisted manufacturing impression coping. The definitive prosthesis then was fabricated. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

NASA Technical Reports Server (NTRS)

1976-01-01

The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

A solution of the geodetic boundary value problem to order e3

NASA Technical Reports Server (NTRS)

Mather, R. S.

1973-01-01

A solution is obtained for the geodetic boundary value problem which defines height anomalies to + or - 5 cm, if the earth were rigid. The solution takes into account the existence of the earth's topography, together with its ellipsoidal shape and atmosphere. A relation is also established between the commonly used solution of Stokes and a development correct to order e cubed. The data requirements call for a complete definition of gravity anomalies at the surface of the earth and a knowledge of elevation characteristics at all points exterior to the geoid. In addition, spherical harmonic representations must be based on geocentric rather than geodetic latitudes.

Exact analytical solution of a classical Josephson tunnel junction problem

NASA Astrophysics Data System (ADS)

Kuplevakhsky, S. V.; Glukhov, A. M.

2010-10-01

We give an exact and complete analytical solution of the classical problem of a Josephson tunnel junction of arbitrary length W ɛ(0,∞) in the presence of external magnetic fields and transport currents. Contrary to a wide-spread belief, the exact analytical solution unambiguously proves that there is no qualitative difference between so-called "small" (W≪1) and "large" junctions (W≫1). Another unexpected physical implication of the exact analytical solution is the existence (in the current-carrying state) of unquantized Josephson vortices carrying fractional flux and located near one of the edges of the junction. We also refine the mathematical definition of critical transport current.

40 CFR 409.11 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.11 Specialized... or related to the concentration and crystallization of sugar solutions. (c) The term product shall mean crystallized refined sugar. ...

40 CFR 409.11 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.11 Specialized... or related to the concentration and crystallization of sugar solutions. (c) The term product shall mean crystallized refined sugar. ...

40 CFR 409.11 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.11 Specialized... or related to the concentration and crystallization of sugar solutions. (c) The term product shall mean crystallized refined sugar. ...

40 CFR 409.11 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.11 Specialized... or related to the concentration and crystallization of sugar solutions. (c) The term product shall mean crystallized refined sugar. ...

40 CFR 409.31 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Liquid Cane Sugar Refining Subcategory § 409.31... (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

Radiation-driven winds of hot stars. VI - Analytical solutions for wind models including the finite cone angle effect

NASA Technical Reports Server (NTRS)

Kudritzki, R. P.; Pauldrach, A.; Puls, J.; Abbott, D. C.

1989-01-01

Analytical solutions for radiation-driven winds of hot stars including the important finite cone angle effect (see Pauldrach et al., 1986; Friend and Abbott, 1986) are derived which approximate the detailed numerical solutions of the exact wind equation of motion very well. They allow a detailed discussion of the finite cone angle effect and provide for given line force parameters k, alpha, delta definite formulas for mass-loss rate M and terminal velocity v-alpha as function of stellar parameters.

Comments on new multiple-brane solutions based on Hata-Kojita duality in open string field theory

NASA Astrophysics Data System (ADS)

Masuda, Toru

2014-05-01

Recently, Hata and Kojita proposed a new energy formula for a class of solutions in Witten's open string field theory based on a novel symmetry of correlation functions they found. Their energy formula can be regarded as a generalization of the conventional energy formula by Murata and Schnabl. Following their proposal, we investigate their new ansatz for the classical solution representing double D-branes. We present a regularized definition of this solution and show that the solution satisfies the equation of motion when it is contracted with the solution itself and when it is contracted with any states in the Fock space. However, the Ellwood invariant and the boundary state of the solution are the same as those for the perturbative vacuum. This result disagrees with an expectation from the Ellwood conjecture.

16 CFR § 1117.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Definitions. (a) Small part means any part, component, or piece of a toy or game, which, when tested in... term “ball” includes any spherical, ovoid, or ellipsoidal object that is designed or intended to be... consisting of a latex bag that is designed to be inflated by air or gas. The term does not include inflatable...

16 CFR 1117.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Definitions. (a) Small part means any part, component, or piece of a toy or game, which, when tested in... term “ball” includes any spherical, ovoid, or ellipsoidal object that is designed or intended to be... consisting of a latex bag that is designed to be inflated by air or gas. The term does not include inflatable...

16 CFR 1117.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Definitions. (a) Small part means any part, component, or piece of a toy or game, which, when tested in... term “ball” includes any spherical, ovoid, or ellipsoidal object that is designed or intended to be... consisting of a latex bag that is designed to be inflated by air or gas. The term does not include inflatable...

16 CFR 1117.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Definitions. (a) Small part means any part, component, or piece of a toy or game, which, when tested in... term “ball” includes any spherical, ovoid, or ellipsoidal object that is designed or intended to be... consisting of a latex bag that is designed to be inflated by air or gas. The term does not include inflatable...

40 CFR 63.1201 - Definitions and acronyms used in this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Definitions and acronyms used in this... manager, and other necessary components and electrical circuitry designed, operated and maintained to stop... kiln raw mill means a hazardous waste burning cement kiln design whereby kiln gas is ducted through the...

40 CFR 63.1201 - Definitions and acronyms used in this subpart.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 12 2012-07-01 2011-07-01 true Definitions and acronyms used in this... manager, and other necessary components and electrical circuitry designed, operated and maintained to stop... kiln raw mill means a hazardous waste burning cement kiln design whereby kiln gas is ducted through the...

Dynamics explorer: Interface definition study, volume 1

NASA Technical Reports Server (NTRS)

1978-01-01

Work done in response to the work statement wherein a specific deliverable was not identified but where design and analysis tasks were identified is reported. The summary and baseline change list is included along with design notes for the spacecraft system, thermal subsystem, power subsystem, communications subsystem, plasma wave instrument interface definition, and the structure.

Blended/Hybrid Courses: A Review of the Literature and Recommendations for Instructional Designers and Educators

ERIC Educational Resources Information Center

Helms, Samuel A.

2014-01-01

This article explores some of the literature on blended/hybrid learning and identifies recommendations for instructional designers and faculty. Terminology and definitions are discussed first including the debate between the words "blended" and "hybrid." A working definition for the article is discussed but the article does not…

Progress on the Fabric for Frontier Experiments Project at Fermilab

NASA Astrophysics Data System (ADS)

Box, Dennis; Boyd, Joseph; Dykstra, Dave; Garzoglio, Gabriele; Herner, Kenneth; Kirby, Michael; Kreymer, Arthur; Levshina, Tanya; Mhashilkar, Parag; Sharma, Neha

2015-12-01

The FabrIc for Frontier Experiments (FIFE) project is an ambitious, major-impact initiative within the Fermilab Scientific Computing Division designed to lead the computing model for Fermilab experiments. FIFE is a collaborative effort between experimenters and computing professionals to design and develop integrated computing models for experiments of varying needs and infrastructure. The major focus of the FIFE project is the development, deployment, and integration of Open Science Grid solutions for high throughput computing, data management, database access and collaboration within experiment. To accomplish this goal, FIFE has developed workflows that utilize Open Science Grid sites along with dedicated and commercial cloud resources. The FIFE project has made significant progress integrating into experiment computing operations several services including new job submission services, software and reference data distribution through CVMFS repositories, flexible data transfer client, and access to opportunistic resources on the Open Science Grid. The progress with current experiments and plans for expansion with additional projects will be discussed. FIFE has taken a leading role in the definition of the computing model for Fermilab experiments, aided in the design of computing for experiments beyond Fermilab, and will continue to define the future direction of high throughput computing for future physics experiments worldwide.

Design concept definition study for an improved shuttle waste collection subsystem

NASA Technical Reports Server (NTRS)

1984-01-01

A no-risk approach for developing an Improved Waste Collection Subsystem (WCS) for the shuttle orbiter is described. The GE Improved WCS Concept builds on the experience of 14 Shuttle missions with over 400 man-days of service. This concept employs the methods of the existing flight-proven mature design, augmenting them to eliminate foreseen difficulties and to fully comply with the design requirements. The GE Improved WCS Concept includes separate storage for used wipes. Compaction of the wipes provides a solution to the capacity problem, fully satisfying the 210 man-day storage requirement. The added feature of in-flight serviceable storage space for the wipes creates a variable capacity feature which affords redundancy in the event of wipes compaction system failure. Addition of features permitting in-flight servicing of the feces storage tank creates a variable capacity WCS with easier post-flight servicing to support rapid turnaround of the Shuttle orbiter. When these features are combined with a vacuum pump to evacuate wipes and fecal storage tanks through replaceable odor/bacteria filters to the cabin, the GE Improved WCS satisfies the known requirements for Space Station use, including no venting to space.

Decision making about healthcare-related tests and diagnostic test strategies. Paper 2: a review of methodological and practical challenges.

PubMed

Mustafa, Reem A; Wiercioch, Wojtek; Cheung, Adrienne; Prediger, Barbara; Brozek, Jan; Bossuyt, Patrick; Garg, Amit X; Lelgemann, Monika; Büehler, Diedrich; Schünemann, Holger J

2017-12-01

In this first of a series of five articles, we provide an overview of how and why healthcare-related tests and diagnostic strategies are currently applied. We also describe how our findings can be integrated with existing frameworks for making decisions that guide the use of healthcare-related tests and diagnostic strategies. We searched MEDLINE, references of identified articles, chapters in relevant textbooks, and identified articles citing classic literature on this topic. We provide updated frameworks for the potential roles and applications of tests with suggested definitions and practical examples. We also discuss study designs that are commonly used to assess tests' performance and the effects of tests on people's health. These designs include diagnostic randomized controlled trials and retrospective validation. We describe the utility of these and other currently suggested designs, which questions they can answer and which ones they cannot. In addition, we summarize the challenges unique to decision-making resulting from the use of tests. This overview highlights current challenges in the application of tests in decision-making in healthcare, provides clarifications, and informs the proposed solutions. Copyright © 2017 Elsevier Inc. All rights reserved.

Euler Technology Assessment program for preliminary aircraft design employing SPLITFLOW code with Cartesian unstructured grid method

NASA Technical Reports Server (NTRS)

Finley, Dennis B.

1995-01-01

This report documents results from the Euler Technology Assessment program. The objective was to evaluate the efficacy of Euler computational fluid dynamics (CFD) codes for use in preliminary aircraft design. Both the accuracy of the predictions and the rapidity of calculations were to be assessed. This portion of the study was conducted by Lockheed Fort Worth Company, using a recently developed in-house Cartesian-grid code called SPLITFLOW. The Cartesian grid technique offers several advantages for this study, including ease of volume grid generation and reduced number of cells compared to other grid schemes. SPLITFLOW also includes grid adaptation of the volume grid during the solution convergence to resolve high-gradient flow regions. This proved beneficial in resolving the large vortical structures in the flow for several configurations examined in the present study. The SPLITFLOW code predictions of the configuration forces and moments are shown to be adequate for preliminary design analysis, including predictions of sideslip effects and the effects of geometry variations at low and high angles of attack. The time required to generate the results from initial surface definition is on the order of several hours, including grid generation, which is compatible with the needs of the design environment.

Design Report for the Synchronized Position, Velocity, and Time Code Generator

DTIC Science & Technology

2015-08-01

Stream Specification 4 2.3 Data Packet Format Specification 4 2.3.1 Individual Message Definition 5 3. MATLAB Parsing Software 6 4. Conclusions and...packet format structure ..................................................................4 Table 2 PPS time message definition ...5 Table 3 Position message definition ...................................................................5

28 CFR 81.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Definitions. 81.5 Section 81.5 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CHILD ABUSE AND CHILD PORNOGRAPHY REPORTING DESIGNATIONS AND PROCEDURES § 81.5 Definitions. Local child protective services agency means that agency of the federal...

21 CFR 156.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20°,” which is incorporated by... refractive index tables) and multiply the difference by 1.016. The resultant value is considered the percent...

21 CFR 156.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20°,” which is incorporated by... refractive index tables) and multiply the difference by 1.016. The resultant value is considered the percent...

21 CFR 156.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20°,” which is incorporated by... refractive index tables) and multiply the difference by 1.016. The resultant value is considered the percent...

21 CFR 156.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Official Final Action” and “Refractive Indices (n) of Sucrose Solutions at 20°,” which is incorporated by... refractive index tables) and multiply the difference by 1.016. The resultant value is considered the percent...

40 CFR 409.21 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Crystalline Cane Sugar Refining Subcategory § 409... raw material (raw sugar) contained within aqueous solution at the beginning of the process for production of refined cane sugar. ...

40 CFR 409.11 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.11... associated with or related to the concentration and crystallization of sugar solutions. (c) The term product shall mean crystallized refined sugar. ...

Isotropy of Angular Frequencies and Weak Chimeras with Broken Symmetry

NASA Astrophysics Data System (ADS)

Bick, Christian

2017-04-01

The notion of a weak chimeras provides a tractable definition for chimera states in networks of finitely many phase oscillators. Here, we generalize the definition of a weak chimera to a more general class of equivariant dynamical systems by characterizing solutions in terms of the isotropy of their angular frequency vector—for coupled phase oscillators the angular frequency vector is given by the average of the vector field along a trajectory. Symmetries of solutions automatically imply angular frequency synchronization. We show that the presence of such symmetries is not necessary by giving a result for the existence of weak chimeras without instantaneous or setwise symmetries for coupled phase oscillators. Moreover, we construct a coupling function that gives rise to chaotic weak chimeras without symmetry in weakly coupled populations of phase oscillators with generalized coupling.

Definitive Surgical Treatment of Infected or Exposed Ventral Hernia Mesh

PubMed Central

Szczerba, Steven R.; Dumanian, Gregory A.

2003-01-01

Objective To discuss the difficulties in dealing with infected or exposed ventral hernia mesh, and to illustrate one solution using an autogenous abdominal wall reconstruction technique. Summary Background Data The definitive treatment for any infected prosthetic material in the body is removal and substitution. When ventral hernia mesh becomes exposed or infected, its removal requires a solution to prevent a subsequent hernia or evisceration. Methods Eleven patients with ventral hernia mesh that was exposed, nonincorporated, with chronic drainage, or associated with a spontaneous enterocutaneous fistula were referred by their initial surgeons after failed local wound care for definitive management. The patients were treated with radical en bloc excision of mesh and scarred fascia followed by immediate abdominal wall reconstruction using bilateral sliding rectus abdominis myofascial advancement flaps. Results Four of the 11 patients treated for infected mesh additionally required a bowel resection. Transverse defect size ranged from 8 to 18 cm (average 13 cm). Average procedure duration was 3 hours without bowel repair and 5 hours with bowel repair. Postoperative length of stay was 5 to 7 days without bowel repair and 7 to 9 days with bowel repair. Complications included hernia recurrence in one case and stitch abscesses in two cases. Follow-up ranges from 6 to 54 months (average 24 months). Conclusions Removal of infected mesh and autogenous flap reconstruction is a safe, reliable, and one-step surgical solution to the problem of infected abdominal wall mesh. PMID:12616130

A note on the relations between thermodynamics, energy definitions and Friedmann equations

NASA Astrophysics Data System (ADS)

Moradpour, H.; Nunes, Rafael C.; Abreu, Everton M. C.; Neto, Jorge Ananias

2017-04-01

We investigate the relation between the Friedmann and thermodynamic pressure equations, through solving the Friedmann and thermodynamic pressure equations simultaneously. Our investigation shows that a perfect fluid, as a suitable solution for the Friedmann equations leading to the standard modeling of the universe expansion history, cannot simultaneously satisfy the thermodynamic pressure equation and those of Friedmann. Moreover, we consider various energy definitions, such as the Komar mass, and solve the Friedmann and thermodynamic pressure equations simultaneously to get some models for dark energy fluids. The cosmological consequences of obtained solutions are also addressed. Our results indicate that some of obtained solutions may unify the dominated fluid in both the primary inflationary and current accelerating eras into one model. In addition, by taking into account a cosmic fluid of a known equation of state (EoS), and combining it with the Friedmann and thermodynamic pressure equations, we obtain the corresponding energy of these cosmic fluids and face their limitations. Finally, we point out the cosmological features of this cosmic fluid and also study its observational constraints.

Cell module and fuel conditioner

NASA Technical Reports Server (NTRS)

Hoover, D. Q., Jr.

1980-01-01

Stack tests indicate that the discrepancies between calculated and measured temperature profiles are due to reactant cross-over and a lower than expected thermal conductivity of cells. Preliminary results indicate that acceptable contact resistance between cooling plane halves can be achieved without the use of paper. The preliminary design of the enclosure, definition of required labor and equipment for manufacturing repeating components, and the assembly procedures for the benchwork design were developed. Fabrication of components for a second 5-cell stack of the MK-2 design and a second 23-cell stack of the MK-1 design was started. The definition of water and fuel for the reforming subsystem was developed along with a preliminary definition of the control system for the subsystem. The construction and shakedown of the differential catalytic reactor was completed and testing of the first catalyst initiated.

Study on Product Innovative Design Process Driven by Ideal Solution

NASA Astrophysics Data System (ADS)

Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

A reuse-based framework for the design of analog and mixed-signal ICs

NASA Astrophysics Data System (ADS)

Castro-Lopez, Rafael; Fernandez, Francisco V.; Rodriguez Vazquez, Angel

2005-06-01

Despite the spectacular breakthroughs of the semiconductor industry, the ability to design integrated circuits (ICs) under stringent time-to-market (TTM) requirements is lagging behind integration capacity, so far keeping pace with still valid Moore"s Law. The resulting gap is threatening with slowing down such a phenomenal growth. The design community believes that it is only by means of powerful CAD tools and design methodologies - and, possibly, a design paradigm shift - that this design gap can be bridged. In this sense, reuse-based design is seen as a promising solution, and concepts such as IP Block, Virtual Component, and Design Reuse have become commonplace thanks to the significant advances in the digital arena. Unfortunately, the very nature of analog and mixed-signal (AMS) design has hindered a similar level of consensus and development. This paper presents a framework for the reuse-based design of AMS circuits. The framework is founded on three key elements: (1) a CAD-supported hierarchical design flow that facilitates the incorporation of AMS reusable blocks, reduces the overall design time, and expedites the management of increasing AMS design complexity; (2) a complete, clear definition of the AMS reusable block, structured into three separate facets or views: the behavioral, structural, and layout facets, the two first for top-down electrical synthesis and bottom-up verification, the latter used during bottom-up physical synthesis; (3) the design for reusability set of tools, methods, and guidelines that, relying on intensive parameterization as well as on design knowledge capture and encapsulation, allows to produce fully reusable AMS blocks. A case study and a functional silicon prototype demonstrate the validity of the paper"s proposals.

Schwarz maps of algebraic linear ordinary differential equations

NASA Astrophysics Data System (ADS)

Sanabria Malagón, Camilo

2017-12-01

A linear ordinary differential equation is called algebraic if all its solution are algebraic over its field of definition. In this paper we solve the problem of finding closed form solution to algebraic linear ordinary differential equations in terms of standard equations. Furthermore, we obtain a method to compute all algebraic linear ordinary differential equations with rational coefficients by studying their associated Schwarz map through the Picard-Vessiot Theory.

Finite-difference models of ordinary differential equations - Influence of denominator functions

NASA Technical Reports Server (NTRS)

Mickens, Ronald E.; Smith, Arthur

1990-01-01

This paper discusses the influence on the solutions of finite-difference schemes of using a variety of denominator functions in the discrete modeling of the derivative for any ordinary differential equation. The results obtained are a consequence of using a generalized definition of the first derivative. A particular example of the linear decay equation is used to illustrate in detail the various solution possibilities that can occur.

The inverse problem for definition of the shape of a molten contact bridge

NASA Astrophysics Data System (ADS)

Kharin, Stanislav N.; Sarsengeldin, Merey M.

2017-09-01

The paper presents the results of investigation of bridging phenomenon occurring at opening of electrical contacts. The mathematical model describing the dynamics of metal molten bridge takes into account the Thomson effect. It is based on the system of partial differential equations for temperature and electrical fields of the bridge in the domain containing two moving unknown boundaries. One of them is an interface between liquid and solid zones of the bridge and should be found by the solution of the corresponding Stefan problem. The second free boundary corresponds to the shape of the visible part of a bridge. Its definition is an inverse problem, for which solution it is necessary to find minimum of the energy consuming for the formation of the shape of a quasi-stationary bridge. Three components of this energy, namely surface tension, pinch effect and gravitation, are defined by the functional which minimum gives the required shape of the bridge. The solution of corresponding variation problem is found by the reduction of the problem to the solution of the system of ordinary differential equations. Calculated values of the voltage of the bridge rupture for various metals are in a good agreement with the experimental data. The criteria responsible for the mechanism of molten bridge rupture are introduced in the paper.

Cryogenic fluid management program flight concept definition

NASA Technical Reports Server (NTRS)

Kroeger, Erich

1987-01-01

The Lewis Research Center's cryogenic fluid management program flight concept definition is presented in viewgraph form. Diagrams are given of the cryogenic fluid management subpallet and its configuration with the Delta launch vehicle. Information is given in outline form on feasibility studies, requirements definition, and flight experiments design.

21 CFR 516.13 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS NEW ANIMAL DRUGS FOR MINOR USE AND MINOR SPECIES Designation of a Minor Use or Minor Species New Animal Drug § 516.13 Definitions. The following definitions of terms apply only in the...

21 CFR 516.13 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS NEW ANIMAL DRUGS FOR MINOR USE AND MINOR SPECIES Designation of a Minor Use or Minor Species New Animal Drug § 516.13 Definitions. The following definitions of terms apply only in the...

21 CFR 516.13 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS NEW ANIMAL DRUGS FOR MINOR USE AND MINOR SPECIES Designation of a Minor Use or Minor Species New Animal Drug § 516.13 Definitions. The following definitions of terms apply only in the...

21 CFR 516.13 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS NEW ANIMAL DRUGS FOR MINOR USE AND MINOR SPECIES Designation of a Minor Use or Minor Species New Animal Drug § 516.13 Definitions. The following definitions of terms apply only in the...

2017 Cardiovascular and Stroke Endpoint Definitions for Clinical Trials.

PubMed

Hicks, Karen A; Mahaffey, Kenneth W; Mehran, Roxana; Nissen, Steven E; Wiviott, Stephen D; Dunn, Billy; Solomon, Scott D; Marler, John R; Teerlink, John R; Farb, Andrew; Morrow, David A; Targum, Shari L; Sila, Cathy A; Hai, Mary T Thanh; Jaff, Michael R; Joffe, Hylton V; Cutlip, Donald E; Desai, Akshay S; Lewis, Eldrin F; Gibson, C Michael; Landray, Martin J; Lincoff, A Michael; White, Christopher J; Brooks, Steven S; Rosenfield, Kenneth; Domanski, Michael J; Lansky, Alexandra J; McMurray, John J V; Tcheng, James E; Steinhubl, Steven R; Burton, Paul; Mauri, Laura; O'Connor, Christopher M; Pfeffer, Marc A; Hung, H M James; Stockbridge, Norman L; Chaitman, Bernard R; Temple, Robert J

2018-02-27

This publication describes uniform definitions for cardiovascular and stroke outcomes developed by the Standardized Data Collection for Cardiovascular Trials Initiative and the US Food and Drug Administration (FDA). The FDA established the Standardized Data Collection for Cardiovascular Trials Initiative in 2009 to simplify the design and conduct of clinical trials intended to support marketing applications. The writing committee recognizes that these definitions may be used in other types of clinical trials and clinical care processes where appropriate. Use of these definitions at the FDA has enhanced the ability to aggregate data within and across medical product development programs, conduct meta-analyses to evaluate cardiovascular safety, integrate data from multiple trials, and compare effectiveness of drugs and devices. Further study is needed to determine whether prospective data collection using these common definitions improves the design, conduct, and interpretability of the results of clinical trials. © 2018 American Heart Association, Inc.

The Johnson Space Center Management Information Systems (JSCMIS). 1: Requirements Definition and Design Specifications for Versions 2.1 and 2.1.1. 2: Documented Test Scenario Environments. 3: Security Design and Specifications

NASA Technical Reports Server (NTRS)

1986-01-01

The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at NASA Johnson which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. This issue gives requirements definition and design specifications for versions 2.1 and 2.1.1, along with documented test scenario environments, and security object design and specifications.

Configuration of electro-optic fire source detection system

NASA Astrophysics Data System (ADS)

Fabian, Ram Z.; Steiner, Zeev; Hofman, Nir

2007-04-01

The recent fighting activities in various parts of the world have highlighted the need for accurate fire source detection on one hand and fast "sensor to shooter cycle" capabilities on the other. Both needs can be met by the SPOTLITE system which dramatically enhances the capability to rapidly engage hostile fire source with a minimum of casualties to friendly force and to innocent bystanders. Modular system design enable to meet each customer specific requirements and enable excellent future growth and upgrade potential. The design and built of a fire source detection system is governed by sets of requirements issued by the operators. This can be translated into the following design criteria: I) Long range, fast and accurate fire source detection capability. II) Different threat detection and classification capability. III) Threat investigation capability. IV) Fire source data distribution capability (Location, direction, video image, voice). V) Men portability. ) In order to meet these design criteria, an optimized concept was presented and exercised for the SPOTLITE system. Three major modular components were defined: I) Electro Optical Unit -Including FLIR camera, CCD camera, Laser Range Finder and Marker II) Electronic Unit -including system computer and electronic. III) Controller Station Unit - Including the HMI of the system. This article discusses the system's components definition and optimization processes, and also show how SPOTLITE designers successfully managed to introduce excellent solutions for other system parameters.

Definition and use of Solution-focused Sustainability Assessment: A novel approach to generate, explore and decide on sustainable solutions for wicked problems.

PubMed

Zijp, Michiel C; Posthuma, Leo; Wintersen, Arjen; Devilee, Jeroen; Swartjes, Frank A

2016-05-01

This paper introduces Solution-focused Sustainability Assessment (SfSA), provides practical guidance formatted as a versatile process framework, and illustrates its utility for solving a wicked environmental management problem. Society faces complex and increasingly wicked environmental problems for which sustainable solutions are sought. Wicked problems are multi-faceted, and deriving of a management solution requires an approach that is participative, iterative, innovative, and transparent in its definition of sustainability and translation to sustainability metrics. We suggest to add the use of a solution-focused approach. The SfSA framework is collated from elements from risk assessment, risk governance, adaptive management and sustainability assessment frameworks, expanded with the 'solution-focused' paradigm as recently proposed in the context of risk assessment. The main innovation of this approach is the broad exploration of solutions upfront in assessment projects. The case study concerns the sustainable management of slightly contaminated sediments continuously formed in ditches in rural, agricultural areas. This problem is wicked, as disposal of contaminated sediment on adjacent land is potentially hazardous to humans, ecosystems and agricultural products. Non-removal would however reduce drainage capacity followed by increased risks of flooding, while contaminated sediment removal followed by offsite treatment implies high budget costs and soil subsidence. Application of the steps in the SfSA-framework served in solving this problem. Important elements were early exploration of a wide 'solution-space', stakeholder involvement from the onset of the assessment, clear agreements on the risk and sustainability metrics of the problem and on the interpretation and decision procedures, and adaptive management. Application of the key elements of the SfSA approach eventually resulted in adoption of a novel sediment management policy. The stakeholder participation and the intensive communication throughout the project resulted in broad support for both the scientific approaches and results, as well as for policy implementation. Copyright © 2016 Elsevier Ltd. All rights reserved.

77 FR 26607 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... frame that is not necessarily a NEMA- equivalent but otherwise covered under EISA 2007) that is June 4.... Definition of NEMA Design B Motors E. Fire Pump Motors Definition F. Fire Pump Motor Coverage G. Energy... provisions designed to improve appliance and commercial equipment energy efficiency. (All references to EPCA...

An Empirical Study of the Process of Crafting and Using Definitions

ERIC Educational Resources Information Center

Little, Angela Jean

2013-01-01

In this dissertation I analyze the process of crafting definitions whose purpose is classification. The context I examine is undergraduate upper-division physical science majors defining and naming sub-categories of a physical phenomenon in the context of a design task over an extended period of time. The goal of the design task is one of…

Protoptype integrated design (Pride) system reference manual. Volume 2: Schema definition

NASA Technical Reports Server (NTRS)

Fishwick, P. A.; Sutter, T. R.; Blackburn, C. L.

1983-01-01

An initial description of an evolving relational database schema is presented for the management of finite element model design and analysis data. The report presents a description of each relation including attribute names, data types, and definitions. The format of this report is such that future modifications and enhancements may be easily incorporated.

Fundamental Issues Concerning the Sustainment and Scaling Up of Professional Development Programs

ERIC Educational Resources Information Center

Tirosh, Dina; Tsamir, Pessia; Levenson, Esther

2015-01-01

The issue of sustaining and scaling up professional development for mathematics teachers raises several fundamental issues for researchers. This commentary addresses various definitions for sustainability and scaling up and how these definitions may affect the design of programs as well as the design of research. We consider four of the papers in…

75 FR 54902 - Statutorily Mandated Designation of Difficult Development Areas and Qualified Census Tracts for 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... ranking ratio, as described above, was identical (to four decimal places) to the last area selected, and... FURTHER INFORMATION CONTACT: For questions on how areas are designated and on geographic definitions... metropolitan area definitions incorporating 2000 Census data in OMB Bulletin No. 03- 04 on June 6, 2003, and...

17 CFR 242.600 - NMS security designation and definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Regulation Nms-Regulation of the National Market System § 242.600 NMS security designation and definitions. (a) The term national market system security as used in section 11A(a)(2) of the Act (15 U.S.C. 78k-1... quotations and are consistent with the maintenance of fair and orderly markets. (5) Average effective spread...

Space station high gain antenna concept definition and technology development

NASA Technical Reports Server (NTRS)

Wade, W. D.

1972-01-01

The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

Design/cost tradeoff studies. Earth Observatory Satellite system definition study (EOS)

NASA Technical Reports Server (NTRS)

1974-01-01

The results of design/cost tradeoff studies conducted during the Earth Observatory Satellite system definition studies are presented. The studies are concerned with the definition of a basic modular spacecraft capable of supporting a variety of operational and/or research and development missions, with the deployment either by conventional launch vehicles or by means of the space shuttle. The three levels investigated during the study are: (1) subsystem tradeoffs, (2) spacecraft tradeoffs, and (3) system tradeoffs. The range of requirements which the modular concept must span is discussed. The mechanical, thermal, power, data and electromagnetic compatibility aspects of modularity are analyzed. Other data are provided for the observatory design concept, the payloads, integration and test, the ground support equipment, and ground data management systems.

Influence of Severe Shot Peening on the Surface State and Ultra-High-Cycle Fatigue Behavior of an AW 7075 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Trško, Libor; Guagliano, Mario; Bokůvka, Otakar; Nový, František; Jambor, Michal; Florková, Zuzana

2017-04-01

The ever more pressing and concurrent requirements of light design, increased performances and reliability, energy savings together with acceptable costs, is always pushing researchers and engineers toward the definition and application of new materials and treatments, able to guarantee superior properties and adequate repeatability and reliability. This means that one step beyond the definition of a potentially successful solution, a complete characterization of the new materials is needed, in order to get the right data and use them in the design process. A promising severe plastic deformation surface treatment to improve the fatigue properties of materials and metal parts is considered in this paper. The used treatment is called the severe shot peening, and it is derived from the conventional shot peening but with use of unusually high peening parameters. It was proven that it is able to generate a nanostructured surface layer of material, which results in superior fatigue properties when applied to many structural materials. The severe shot peening is applied to an AW 7075 Al alloy, widely used in mechanical and aeronautic constructions and the effects of such a treatment on this material are investigated in this paper, with particular emphasis on the ultra-high-cycle fatigue behavior. The results address the choice of the correct treatment parameters for getting an evaluable advantage of this treatment and are critically discussed for a complete understanding of the mechanisms leading to the modified fatigue behavior, in view of the future developments and research in the field.

Out of the Dark Ages

ERIC Educational Resources Information Center

Parry, John

1977-01-01

Discusses the circumstances under which an individual may be legally confined to a mental institution. This includes the definition of "dangerousness", the attitudes of psychiatrists and civil libertarians, and a compromise solution between those viewpoints. (Author/RK)

The High-Resolution Wave-Propagation Method Applied to Meso- and Micro-Scale Flows

NASA Technical Reports Server (NTRS)

Ahmad, Nashat N.; Proctor, Fred H.

2012-01-01

The high-resolution wave-propagation method for computing the nonhydrostatic atmospheric flows on meso- and micro-scales is described. The design and implementation of the Riemann solver used for computing the Godunov fluxes is discussed in detail. The method uses a flux-based wave decomposition in which the flux differences are written directly as the linear combination of the right eigenvectors of the hyperbolic system. The two advantages of the technique are: 1) the need for an explicit definition of the Roe matrix is eliminated and, 2) the inclusion of source term due to gravity does not result in discretization errors. The resulting flow solver is conservative and able to resolve regions of large gradients without introducing dispersion errors. The methodology is validated against exact analytical solutions and benchmark cases for non-hydrostatic atmospheric flows.

Shuttle TPS thermal performance and analysis methodology

NASA Technical Reports Server (NTRS)

Neuenschwander, W. E.; Mcbride, D. U.; Armour, G. A.

1983-01-01

Thermal performance of the thermal protection system was approximately as predicted. The only extensive anomalies were filler bar scorching and over-predictions in the high Delta p gap heating regions of the orbiter. A technique to predict filler bar scorching has been developed that can aid in defining a solution. Improvement in high Delta p gap heating methodology is still under study. Minor anomalies were also examined for improvements in modeling techniques and prediction capabilities. These include improved definition of low Delta p gap heating, an analytical model for inner mode line convection heat transfer, better modeling of structure, and inclusion of sneak heating. The limited number of problems related to penetration items that presented themselves during orbital flight tests were resolved expeditiously, and designs were changed and proved successful within the time frame of that program.

Countering MANPADS: study of new concepts and applications

NASA Astrophysics Data System (ADS)

Maltese, Dominique; Robineau, Jacques; Audren, Jean-Thierry; Aragones, Julien; Sailliot, Christophe

2006-05-01

The latest events of ground-to-air Man Portable Air Defense (MANPAD) attacks against aircraft have revealed a new threat both for military and civilian aircraft. Consequently, the implementation of Protecting systems (i.e. Directed InfraRed Counter Measure - DIRCM) in order to face IR guided missiles turns out to be now inevitable. In a near future, aircraft will have to possess detection, tracking, targeting and jamming capabilities to face single and multiple MANPAD threats fired in short-range scenarios from various environments (urban sites, landscape...). In this paper, a practical example of a DIRCM system under study at SAGEM DEFENSE & SECURITY company is presented. The self-protection solution includes built-in and automatic locking-on, tracking, identification and laser jamming capabilities, including defeat assessment. Target Designations are provided by a Missile Warning System. Multiple Target scenarios have been considered to design the system architecture. The article deals with current and future threats (IR seekers of different generations...), scenarios and platforms for system definition. Plus, it stresses on self-protection solutions based on laser jamming capability. Different strategies including target identification, multi band laser, active imagery are described. The self-protection system under study at SAGEM DEFENSE & SECURITY company is also a part of this chapter. Eventually, results of self-protection scenarios are provided for different MANPAD scenarios. Data have been obtained from a simulation software. The results highlight how the system reacts to incoming IR-guided missiles in short time scenarios.

What's the Matter? Studying the Concept of Matter in Middle School.

ERIC Educational Resources Information Center

Abell, Sandra K.; And Others

1996-01-01

Describes a fifth-grade science classroom where students were asked to invent an operational definition of matter and validate that definition by designing and implementing a variety of tests. Challenges students to confront their misunderstandings about matter and move beyond merely reciting a definition. (JRH)

Student-Created Definitions of Sequence Convergence: A Case Study

ERIC Educational Resources Information Center

Fisher, Brian

2016-01-01

This paper describes the development of an instructional sequence designed to allow students to reinvent the definition of sequence convergence in an introductory proof course. The sequence follows a heuristic of guided reinvention that encourages students to independently create their own mathematical definitions. This case study reports on how…

11 CFR 2.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 11 Federal Elections 1 2011-01-01 2011-01-01 false Definitions. 2.2 Section 2.2 Federal Elections FEDERAL ELECTION COMMISSION SUNSHINE REGULATIONS; MEETINGS § 2.2 Definitions. (a) Commission. Commission... to 2 U.S.C. 437c(a), but does not include a proxy or other designated representative of a...

11 CFR 2.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 11 Federal Elections 1 2013-01-01 2012-01-01 true Definitions. 2.2 Section 2.2 Federal Elections FEDERAL ELECTION COMMISSION SUNSHINE REGULATIONS; MEETINGS § 2.2 Definitions. (a) Commission. Commission... to 2 U.S.C. 437c(a), but does not include a proxy or other designated representative of a...

11 CFR 2.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 11 Federal Elections 1 2014-01-01 2014-01-01 false Definitions. 2.2 Section 2.2 Federal Elections FEDERAL ELECTION COMMISSION SUNSHINE REGULATIONS; MEETINGS § 2.2 Definitions. (a) Commission. Commission... to 2 U.S.C. 437c(a), but does not include a proxy or other designated representative of a...

11 CFR 2.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 11 Federal Elections 1 2012-01-01 2012-01-01 false Definitions. 2.2 Section 2.2 Federal Elections FEDERAL ELECTION COMMISSION SUNSHINE REGULATIONS; MEETINGS § 2.2 Definitions. (a) Commission. Commission... to 2 U.S.C. 437c(a), but does not include a proxy or other designated representative of a...

40 CFR 116.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Definitions. 116.3 Section 116.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS DESIGNATION OF HAZARDOUS SUBSTANCES § 116.3 Definitions. As used in this part, all terms shall have the meaning defined in the Act and...

40 CFR 116.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Definitions. 116.3 Section 116.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS DESIGNATION OF HAZARDOUS SUBSTANCES § 116.3 Definitions. As used in this part, all terms shall have the meaning defined in the Act and...

40 CFR 116.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Definitions. 116.3 Section 116.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS DESIGNATION OF HAZARDOUS SUBSTANCES § 116.3 Definitions. As used in this part, all terms shall have the meaning defined in the Act and...

23 CFR 750.303 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Outdoor Advertising (Acquisition of Rights of Sign and Sign Site Owners) § 750.303 Definitions. (a) Sign... 23 Highways 1 2010-04-01 2010-04-01 false Definitions. 750.303 Section 750.303 Highways FEDERAL..., billboard or other thing which is designed, intended of the advertising or informative contents of which is...

34 CFR 108.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ACCESS TO PUBLIC SCHOOL FACILITIES FOR THE BOY SCOUTS OF AMERICA AND OTHER DESIGNATED YOUTH GROUPS § 108.3 Definitions. The following definitions apply to this part: (a) Act means the Boy Scouts of America.... 7905). (b) Boy Scouts means the organization named “Boy Scouts of America,” which has a Federal charter...

34 CFR 108.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ACCESS TO PUBLIC SCHOOL FACILITIES FOR THE BOY SCOUTS OF AMERICA AND OTHER DESIGNATED YOUTH GROUPS § 108.3 Definitions. The following definitions apply to this part: (a) Act means the Boy Scouts of America.... 7905). (b) Boy Scouts means the organization named “Boy Scouts of America,” which has a Federal charter...

34 CFR 108.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ACCESS TO PUBLIC SCHOOL FACILITIES FOR THE BOY SCOUTS OF AMERICA AND OTHER DESIGNATED YOUTH GROUPS § 108.3 Definitions. The following definitions apply to this part: (a) Act means the Boy Scouts of America.... 7905). (b) Boy Scouts means the organization named “Boy Scouts of America,” which has a Federal charter...

34 CFR 108.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ACCESS TO PUBLIC SCHOOL FACILITIES FOR THE BOY SCOUTS OF AMERICA AND OTHER DESIGNATED YOUTH GROUPS § 108.3 Definitions. The following definitions apply to this part: (a) Act means the Boy Scouts of America.... 7905). (b) Boy Scouts means the organization named “Boy Scouts of America,” which has a Federal charter...

34 CFR 108.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ACCESS TO PUBLIC SCHOOL FACILITIES FOR THE BOY SCOUTS OF AMERICA AND OTHER DESIGNATED YOUTH GROUPS § 108.3 Definitions. The following definitions apply to this part: (a) Act means the Boy Scouts of America.... 7905). (b) Boy Scouts means the organization named “Boy Scouts of America,” which has a Federal charter...

Elaborations of Introductory Psychology Terms: Effects on Test Performance and Subjective Ratings

ERIC Educational Resources Information Center

Balch, William R.

2005-01-01

Undergraduate students participated in an experiment designed to evaluate different types of elaborations on definitions of 16 psychology terms. First, participants received booklets presenting the definition of each term, followed by 1 of several elaborations: an example, a mnemonic, a paraphrase, or a repeated definition (the nonelaborating…

InGaAsP/InP buried-heterostructure lasers /lambda = 1.5 microns/ with chemically etched mirrors

NASA Astrophysics Data System (ADS)

Adachi, S.; Kawaguchi, H.; Takahei, K.; Noguchi, Y.

1981-09-01

The monolithic fabrication of buried heterostructure InGaAsP/InP lasers operating at a wavelength of 1.5 microns with chemically etched mirrors is reported. The buried heterostructure lasers were prepared from InGaAsP/InP DH wafers reverse-mesa etched with a Br2:CH3OH solution, with the reverse-mesa walls buried by subsequent LPE growth. To fabricate the etched mirror laser, Au-Zn metal was evaporated onto the epitaxial-layer side of the wafer and an Au-Zn contact was defined by photolithography; photolithographic techniques were used to define a SiO2 mask directly over the Au-Zn contact for etched mirror definition using either 0.3 vol % Br2:CH3OH or HCl:CH3COOH:H2O2 1:2:1 solutions. A threshold current of 50 mA is obtained from lasers thus produced, which is nearly the same as that of conventionally fabricated cleaved-mirror lasers. The procedure presented thus allows low threshold-current devices to be obtained with a much greater flexibility in design and fabrication than previously attained.

High-definition endoscopy with iScan and Lugol's solution for the detection of inflammation in patients with nonerosive reflux disease: histologic evaluation in comparison with a control group.

PubMed

Rey, J W; Deris, N; Marquardt, J U; Thomaidis, T; Moehler, M; Kittner, J M; Nguyen-Tat, M; Dümcke, S; Tresch, A; Biesterfeld, S; Goetz, M; Mudter, J; Neurath, M F; Galle, P R; Kiesslich, R; Hoffman, A

2016-01-01

Nonerosive reflux disease (NERD) is commonly diagnosed in patients with symptoms of reflux. The aim of the present study was to determine whether high-definition endoscopy (HD) plus equipped with the iScan function or chromoendoscopy with Lugol's solution might permit the differentiation of NERD patients from those without reflux symptoms, proven by targeted biopsies of endoscopic lesions. A total of 100 patients without regular intake of proton pump inhibitors and with a normal conventional upper endoscopy were prospectively divided into NERD patients and controls. A second upper endoscopy was performed using HD+ with additional iScan function and then Lugol's solution was applied. Biopsy specimens were taken from the gastroesophageal junction in all patients. A total of 65 patients with reflux symptoms and 27 controls were included. HD(+) endoscopy with iScan revealed subtle mucosal breaks in 52 patients; the subsequent biopsies confirmed esophagitis in all cases. After Lugol's solution, 58 patients showed mucosal breaks. Sensitivity for the iScan procedure was 82.5%, whereas that for Lugol's solution was 92.06%. Excellent positive predictive values of 100% and 98.3%, respectively, were noted. The present study suggests that the majority of patients with NERD and typical symptoms of reflux disease can be identified by iScan or Lugol's chromoendoscopy as minimal erosive reflux disease (ERD) patients. © 2014 International Society for Diseases of the Esophagus.

Orbital transfer vehicle concept definition and system analysis study, 1985. Volume 2: OTV concept definition and evaluation. Book 2: OTV concept definition

NASA Technical Reports Server (NTRS)

Dickman, Glen J.; Keeley, J. T.

1985-01-01

This portion of the Orbit Transfer Vehicle (OTV) Concept Definition and System Analysis Study, Volume 2, Book 2, summarizes the flight vehicle concept selection process and results. It presents an overview of OTV mission and system design requirements and describes the family of OTV recommended, the reasons for this recommendation, and the associated Phase C/D Program.

High-definition video display based on the FPGA and THS8200

NASA Astrophysics Data System (ADS)

Qian, Jia; Sui, Xiubao

2014-11-01

This paper presents a high-definition video display solution based on the FPGA and THS8200. THS8200 is a video decoder chip launched by TI company, this chip has three 10-bit DAC channels which can capture video data in both 4:2:2 and 4:4:4 formats, and its data synchronization can be either through the dedicated synchronization signals HSYNC and VSYNC, or extracted from the embedded video stream synchronization information SAV / EAV code. In this paper, we will utilize the address and control signals generated by FPGA to access to the data-storage array, and then the FPGA generates the corresponding digital video signals YCbCr. These signals combined with the synchronization signals HSYNC and VSYNC that are also generated by the FPGA act as the input signals of THS8200. In order to meet the bandwidth requirements of the high-definition TV, we adopt video input in the 4:2:2 format over 2×10-bit interface. THS8200 is needed to be controlled by FPGA with I2C bus to set the internal registers, and as a result, it can generate the synchronous signal that is satisfied with the standard SMPTE and transfer the digital video signals YCbCr into analog video signals YPbPr. Hence, the composite analog output signals YPbPr are consist of image data signal and synchronous signal which are superimposed together inside the chip THS8200. The experimental research indicates that the method presented in this paper is a viable solution for high-definition video display, which conforms to the input requirements of the new high-definition display devices.

HPC on Competitive Cloud Resources

NASA Astrophysics Data System (ADS)

Bientinesi, Paolo; Iakymchuk, Roman; Napper, Jeff

Computing as a utility has reached the mainstream. Scientists can now easily rent time on large commercial clusters that can be expanded and reduced on-demand in real-time. However, current commercial cloud computing performance falls short of systems specifically designed for scientific applications. Scientific computing needs are quite different from those of the web applications that have been the focus of cloud computing vendors. In this chapter we demonstrate through empirical evaluation the computational efficiency of high-performance numerical applications in a commercial cloud environment when resources are shared under high contention. Using the Linpack benchmark as a case study, we show that cache utilization becomes highly unpredictable and similarly affects computation time. For some problems, not only is it more efficient to underutilize resources, but the solution can be reached sooner in realtime (wall-time). We also show that the smallest, cheapest (64-bit) instance on the studied environment is the best for price to performance ration. In light of the high-contention we witness, we believe that alternative definitions of efficiency for commercial cloud environments should be introduced where strong performance guarantees do not exist. Concepts like average, expected performance and execution time, expected cost to completion, and variance measures--traditionally ignored in the high-performance computing context--now should complement or even substitute the standard definitions of efficiency.

Participatory design of a social enterprise for rehabilitees.

PubMed

Konsti-Laakso, Suvi; Koskela, Virpi; Martikainen, Suvi-Jonna; Melkas, Helinä; Mellanen, Laura

2016-09-27

Social enterprises are often seen as a source of new and innovative solutions to persistent societal problems and a means for better inclusion of employees and customers. Because social enterprises combine business logic and social goals, they have vast potential to renew business and social life; therefore, it is vital to understand how their creation can be initiated and supported. This study provides an overview of the participatory design process for a new social enterprise as it appears in practice. The methods used in this case study guided the participants - mental health and substance abuse rehabilitees - in the co-creation and refinement of a business idea. The methods used enabled participants to acknowledge their own strengths or preferences for their potential future work, which was a unique means of establishing a new social enterprise. Social empowerment of the participants/future employees of the social enterprise formed the important, intangible capital in this case. By definition, the core of social enterprises is the customer- and employee-driven nature. This study clarifies how a social enterprise functions as a laboratory of social innovation at the local and community levels.

Real-Time Fault Detection Approach for Nonlinear Systems and its Asynchronous T-S Fuzzy Observer-Based Implementation.

PubMed

Li, Linlin; Ding, Steven X; Qiu, Jianbin; Yang, Ying

2017-02-01

This paper is concerned with a real-time observer-based fault detection (FD) approach for a general type of nonlinear systems in the presence of external disturbances. To this end, in the first part of this paper, we deal with the definition and the design condition for an L ∞ / L 2 type of nonlinear observer-based FD systems. This analytical framework is fundamental for the development of real-time nonlinear FD systems with the aid of some well-established techniques. In the second part, we address the integrated design of the L ∞ / L 2 observer-based FD systems by applying Takagi-Sugeno (T-S) fuzzy dynamic modeling technique as the solution tool. This fuzzy observer-based FD approach is developed via piecewise Lyapunov functions, and can be applied to the case that the premise variables of the FD system is nonsynchronous with the premise variables of the fuzzy model of the plant. In the end, a case study on the laboratory setup of three-tank system is given to show the efficiency of the proposed results.

Mobile platform for treatment of stroke: A case study of tele-assistance.

PubMed

Torres Zenteno, Arturo Henry; Fernández, Francisco; Palomino-García, Alfredo; Moniche, Francisco; Escudero, Irene; Jiménez-Hernández, M Dolores; Caballero, Auxiliadora; Escobar-Rodriguez, Germán; Parra, Carlos

2016-09-01

This article presents the technological solution of a tele-assistance process for stroke patients in acute phase in the Seville metropolitan area. The main objective of this process is to reduce time from symptom onset to treatment of acute phase stroke patients by means of telemedicine, regarding mobility between an intensive care unit ambulance and an expert center and activating the pre-hospital care phase. The technological platform covering the process has been defined following an interoperability model based on standards and with a focus on service-oriented architecture focus. Messaging definition has been designed according to the reference model of the CEN/ISO 13606, messages content follows the structure of archetypes. An XDS-b (Cross-Enterprise Document Sharing-b) transaction messaging has been designed according to Integrating the Healthcare Enterprise profile for archetype notifications and update enquiries.This research has been performed by a multidisciplinary group. The Virgen del Rocío University Hospital acts as Reference Hospital and the Public Company for Healthcare as mobility surroundings. © The Author(s) 2015.

A new view for nanoparticle assemblies: from crystalline to binary cooperative complementarity.

PubMed

Yan, Cong; Wang, Tie

2017-03-06

Studies on nanoparticle assemblies and their applications have been research frontiers in nanoscience in the past few decades and remarkable progress has been made in the synthetic strategies and techniques. Recently, the design and fabrication of the nanoparticle-based nanomaterials or nanodevices with integrated and enhanced properties compared to those of the individual components have gradually become the mainstream. However, a systematic solution to provide a big picture for future development and guide the investigation of different aspects of the study of nanoparticle assemblies remains a challenge. The binary cooperative complementary principle could be an answer. The binary cooperative complementary principle is a universal discipline and can describe the fundamental properties of matter from the subatomic particles to the universe. According to its definition, a variety of nanoparticle assemblies, which represent the cutting-edge work in the nanoparticle studies, are naturally binary cooperative complementary materials. Therefore, the introduction of the binary cooperative complementary principle in the studies of nanoparticle assemblies could provide a unique perspective for reviewing this field and help in the design and fabrication of novel functional nanoparticle assemblies.

Scaling and saturation laws for the expansion of concrete exposed to sulfate attack.

PubMed

Monteiro, Paulo J M

2006-08-01

Reinforced concrete structures exposed to aggressive environments often require repair or retrofit even though they were designed to last >50 years. This statement is especially true for structures subjected to sulfate attack. It is critical that fundamental models of life prediction be developed for durability of concrete. Based on experimental results obtained over a 40-year period, scaling and saturation laws were formulated for concrete exposed to sulfate solution. These features have not been considered in current models used to predict life cycle of concrete exposed to aggressive environment. The mathematical analysis shows that porous concrete made with high and moderate water-to-cement ratios develops a definite scaling law after an initiation time. The scaling coefficient depends on the cement composition but does not depend on the original water-to-cement ratio. Dense concrete made with low water-to-cement ratios develops a cyclic saturation curve. An index for "potential of damage" is created to allow engineers to design concrete structures with better precision and cement chemists to develop portland cements with optimized composition.

On the scaling analysis of the solute boundary layer in idealized growth configurations

NASA Astrophysics Data System (ADS)

Garandet, J. P.; Duffar, T.; Favier, J. J.

1990-11-01

A scaling procedure is applied to the equation governing chemical transport in idealized Czochralski and horizontal Bridgman growth experiments. Our purpose is to get a fair estimate of the solute boundary layer in front of the solidification interface. The results are very good in the Czochralski type configuration, the maximum error with respect to the semi-analytical solution of Burton, Prim and Schlichter being of the order of 20%. In the Bridgman type configuration, our predictions compare well with the values of the numerical simulations; however, more data would be needed for a definite conclusion to be drawn.

The thermodynamic water retention capacity of solutions and gels.

PubMed

Borchard, W; Jablonski, P

2003-01-01

The thermodynamic water retention capacity (WRC) has been defined and applied to different heterogeneous phase equilibria. This definition includes others known from the literature for testing heterogeneous systems. For the type of a real solution it is shown that at constant values of temperature and pressure the WRC is related to the difference of the chemical potential of water between the original state and the state after having applied a constraint. The dependence of WRC on concentration of a solute is predicted to be described by an e-function which has been experimentally confirmed in the literature.

Is It Really English for Everyone?

ERIC Educational Resources Information Center

Bartoli, Jill Sunday

1986-01-01

Discusses how the socioeconomic "caste system" operates to differentiate education, and addresses questions concerning the definition of mainstream competence and the labeling of students as unfit or incompetent. Discusses the shortcomings of the three solutions for language incompetence. (HTH)

77 FR 12055 - Comment Sought on Petition for Declaratory Ruling Interpreting the Definition of “Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... Networks of California, Inc.'s Distributed Antenna Systems and Other ``Small-Cell'' Solutions AGENCY.... Petitioner states that it provides telecommunications service via Distributed Antenna Systems (DAS) and other...

Symmetric tridiagonal structure preserving finite element model updating problem for the quadratic model

NASA Astrophysics Data System (ADS)

Rakshit, Suman; Khare, Swanand R.; Datta, Biswa Nath

2018-07-01

One of the most important yet difficult aspect of the Finite Element Model Updating Problem is to preserve the finite element inherited structures in the updated model. Finite element matrices are in general symmetric, positive definite (or semi-definite) and banded (tridiagonal, diagonal, penta-diagonal, etc.). Though a large number of papers have been published in recent years on various aspects of solutions of this problem, papers dealing with structure preservation almost do not exist. A novel optimization based approach that preserves the symmetric tridiagonal structures of the stiffness and damping matrices is proposed in this paper. An analytical expression for the global minimum solution of the associated optimization problem along with the results of numerical experiments obtained by both the analytical expressions and by an appropriate numerical optimization algorithm are presented. The results of numerical experiments support the validity of the proposed method.

Optimization in the systems engineering process

NASA Technical Reports Server (NTRS)

Lemmerman, Loren A.

1993-01-01

The essential elements of the design process consist of the mission definition phase that provides the system requirements, the conceptual design, the preliminary design and finally the detailed design. Mission definition is performed largely by operations analysts in conjunction with the customer. The result of their study is handed off to the systems engineers for documentation as the systems requirements. The document that provides these requirements is the basis for the further design work of the design engineers at the Lockheed-Georgia Company. The design phase actually begins with conceptual design, which is generally conducted by a small group of engineers using multidisciplinary design programs. Because of the complexity of the design problem, the analyses are relatively simple and generally dependent on parametric analyses of the configuration. The result of this phase is a baseline configuration from which preliminary design may be initiated.

15 CFR 922.151 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARINE SANCTUARY PROGRAM REGULATIONS Olympic Coast National Marine Sanctuary § 922.151 Definitions. In... that has been used in the Sanctuary before the effective date of Sanctuary designation (July 22, 1994...

Design Optimization for the Measurement Accuracy Improvement of a Large Range Nanopositioning Stage

PubMed Central

Torralba, Marta; Yagüe-Fabra, José Antonio; Albajez, José Antonio; Aguilar, Juan José

2016-01-01

Both an accurate machine design and an adequate metrology loop definition are critical factors when precision positioning represents a key issue for the final system performance. This article discusses the error budget methodology as an advantageous technique to improve the measurement accuracy of a 2D-long range stage during its design phase. The nanopositioning platform NanoPla is here presented. Its specifications, e.g., XY-travel range of 50 mm × 50 mm and sub-micrometric accuracy; and some novel designed solutions, e.g., a three-layer and two-stage architecture are described. Once defined the prototype, an error analysis is performed to propose improvement design features. Then, the metrology loop of the system is mathematically modelled to define the propagation of the different sources. Several simplifications and design hypothesis are justified and validated, including the assumption of rigid body behavior, which is demonstrated after a finite element analysis verification. The different error sources and their estimated contributions are enumerated in order to conclude with the final error values obtained from the error budget. The measurement deviations obtained demonstrate the important influence of the working environmental conditions, the flatness error of the plane mirror reflectors and the accurate manufacture and assembly of the components forming the metrological loop. Thus, a temperature control of ±0.1 °C results in an acceptable maximum positioning error for the developed NanoPla stage, i.e., 41 nm, 36 nm and 48 nm in X-, Y- and Z-axis, respectively. PMID:26761014

26 CFR 1.168A-4 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Definitions. 1.168A-4 Section 1.168A-4 Internal... TAXES (CONTINUED) Itemized Deductions for Individuals and Corporations § 1.168A-4 Definitions. As used... authority designated by the President by Executive order. (b) “Emergency facility” means any facility, land...

Toward More Precise Definition and Evaluation of Televised Educational Programming

ERIC Educational Resources Information Center

Aversa Fran; Morrison, Gary R.

1978-01-01

An operational definition of public television programming and its implications for development and production agencies is sorely needed. This article explores some of the components of such a definition and examines the differences in several types of educational programming in terms of specific design and evaluation variables of the program.…

A fast, preconditioned conjugate gradient Toeplitz solver

NASA Technical Reports Server (NTRS)

Pan, Victor; Schrieber, Robert

1989-01-01

A simple factorization is given of an arbitrary hermitian, positive definite matrix in which the factors are well-conditioned, hermitian, and positive definite. In fact, given knowledge of the extreme eigenvalues of the original matrix A, an optimal improvement can be achieved, making the condition numbers of each of the two factors equal to the square root of the condition number of A. This technique is to applied to the solution of hermitian, positive definite Toeplitz systems. Large linear systems with hermitian, positive definite Toeplitz matrices arise in some signal processing applications. A stable fast algorithm is given for solving these systems that is based on the preconditioned conjugate gradient method. The algorithm exploits Toeplitz structure to reduce the cost of an iteration to O(n log n) by applying the fast Fourier Transform to compute matrix-vector products. Matrix factorization is used as a preconditioner.

VCE testbed program planning and definition study

NASA Technical Reports Server (NTRS)

Westmoreland, J. S.; Godston, J.

1978-01-01

The flight definition of the Variable Stream Control Engine (VSCE) was updated to reflect design improvements in the two key components: (1) the low emissions duct burner, and (2) the coannular exhaust nozzle. The testbed design was defined and plans for the overall program were formulated. The effect of these improvements was evaluated for performance, emissions, noise, weight, and length. For experimental large scale testing of the duct burner and coannular nozzle, a design definition of the VCE testbed configuration was made. This included selecting the core engine, determining instrumentation requirements, and selecting the test facilities, in addition to defining control system and assembly requirements. Plans for a comprehensive test program to demonstrate the duct burner and nozzle technologies were formulated. The plans include both aeroacoustic and emissions testing.

Fashion design solutions for environmentally conscious consumers

NASA Astrophysics Data System (ADS)

Wagner, M.; Chen, Y.; Curteza, A.; Thomassey, S.; Perwuelz, A.; Zeng, X.

2017-10-01

This paper intends to give an overview of the design solutions in fashion for environmentally conscious consumers, presenting green and ethical practices in contemporary clothing design. The results introduce the concept of slow fashion and discuss available fashion design solutions, giving most prominent examples of sustainable products and brands, these contain one or more design features. By this, the discussion extracts the main contemporary ideas. The presented examples of current offers are all envisioning less impact on the environment and society. Sustainable design solutions use more environmentally friendly materials such as organic cotton, incorporate circular design or design for recycling, e.g., replacing button closures with alternative closing possibilities or leather labels with printed versions, or ensure long product life through durability, among other methods. There are differing designs due to creators’ individuality. This overview can be beneficial for the future development of new solutions for more environmentally friendly fashion.

Earth Observatory Satellite system definition study. Report no. 7: EOS system definition report

NASA Technical Reports Server (NTRS)

1974-01-01

The design concept and operational aspects of the Earth Observatory Satellite (EOS) are presented. A table of the planned EOS missions is included to show the purpose of the mission, the instruments involved, and the launch date. The subjects considered in the analysis of the EOS development are: (1) system requirements, (2) design/cost trade methodology, (3) observatory design alternatives, (4) the data management system, (5) the design evaluation and preferred approach, (6) program cost compilation, (7) follow-on mission accommodation, and (8) space shuttle interfaces and utilization. Illustrations and block diagrams of the spacecraft configurations are provided.

NREL's Impact Grows Through the Clean Energy Solutions Center and the New

Science.gov Websites

Clean Energy Design Studio - Continuum Magazine | NREL NREL's Impact Grows Through the Clean Energy Solutions Center and the New Clean Energy Design Studio The Clean Energy Solutions Center (Solutions Center) helps governments design and adopt policies and programs that support the deployment of

Space Station Furnace Facility. Volume 2: Requirements Definition and Conceptual Design Study. Appendix 3: Environment Analysis. Volume 2; Appendix 3

NASA Technical Reports Server (NTRS)

1992-01-01

A Preliminary Safety Analysis (PSA) is being accomplished as part of the Space Station Furnace Facility (SSFF) contract. This analysis is intended to support SSFF activities by analyzing concepts and designs as they mature to develop essential safety requirements for inclusion in the appropriate specifications, and designs, as early as possible. In addition, the analysis identifies significant safety concerns that may warrant specific trade studies or design definition, etc. The analysis activity to date concentrated on hazard and hazard cause identification and requirements development with the goal of developing a baseline set of detailed requirements to support trade study, specifications development, and preliminary design activities. The analysis activity will continue as the design and concepts mature. Section 2 defines what was analyzed, but it is likely that the SSFF definitions will undergo further changes. The safety analysis activity will reflect these changes as they occur. The analysis provides the foundation for later safety activities. The hazards identified will in most cases have Preliminary Design Review (PDR) applicability. The requirements and recommendations developed for each hazard will be tracked to ensure proper and early resolution of safety concerns.

48 CFR 237.7301 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... good standing in a curriculum designed to lead to the granting of a recognized degree, during the term... Development Laboratories 237.7301 Definitions. As used in this subpart— (a) Institution of higher learning...

33 CFR 167.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES General § 167.5 Definitions. (a) Area to be avoided means a... certain classes of ships. (b) Traffic separation scheme (TSS) means a designated routing measure which is...

9 CFR 331.1 - Definition of “State”.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... WHICH ENDANGER PUBLIC HEALTH AND FOR SUCH DESIGNATED ESTABLISHMENTS § 331.1 Definition of “State”. For...

9 CFR 331.1 - Definition of “State”.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... WHICH ENDANGER PUBLIC HEALTH AND FOR SUCH DESIGNATED ESTABLISHMENTS § 331.1 Definition of “State”. For...

Lightweight Tactical Client: A Capability-Based Approach to Command Post Computing

DTIC Science & Technology

2015-12-01

bundles these capabilities together is proposed: a lightweight tactical client. In order to avoid miscommunication in the future, it is... solutions and almost definitely rules out most terminal-based thin clients. UNCLASSIFIED Approved for public release

A New Look at an Old Work Problem

ERIC Educational Resources Information Center

Waits, Bert K.; Silver, Jerry L.

1973-01-01

Two approaches are discussed for calculating the work necessary to pump water from a conical or parabolic container. The direct method derived from the definition of work is easy to misuse, as illustrated by a student's incorrect solution. (JP)

40 CFR 428.11 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Tire and Inner Tube Plants... black, oils, chemical compounds, fabric and wire used in the manufacture of pneumatic tires and inner... inner tube plants constructed before 1959, discharges from the following: Soapstone solution...

40 CFR 428.11 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Tire and Inner Tube Plants... black, oils, chemical compounds, fabric and wire used in the manufacture of pneumatic tires and inner... inner tube plants constructed before 1959, discharges from the following: Soapstone solution...

Effect of confinement in nano-porous materials on the solubility of a supercritical gas

NASA Astrophysics Data System (ADS)

Hu, Yaofeng; Huang, Liangliang; Zhao, Shuangliang; Liu, Honglai; Gubbins, Keith E.

2016-11-01

By combining Gibbs Ensemble Monte Carlo simulations and density functional theory, we investigate the influence of confinement in a slit-shaped carbon pore on the solubility of a supercritical solute gas in a liquid solvent. In the cases studied here, competing adsorption of the solvent and solute determines whether the solubility is enhanced or suppressed for larger pores. We find that the solubility in the confined system is strongly dependent on pore width, and that molecular packing effects are important for small pore widths. In addition, the solubility decreases on increase in the temperature, as for the bulk mixture, but the rate of decrease is greater in the pore due to a decrease in the partial molar enthalpy of the solute in the pore; this effect becomes greater as pore width is decreased. The solubility is increased on increasing the bulk pressure of the gas in equilibrium with the pore, and obeys Henry's law at lower pressures. However, the Henry constant differs significantly from that for the bulk mixture, and the range of pressure over which Henry's law applies is reduced relative to that for the bulk mixture. The latter observation indicates that solute-solute interactions become more important in the pore than for the bulk at a given bulk pressure. Finally, we note that different authors use different definitions of the solubility in pores, leading to some confusion over the reported phenomenon of 'oversolubility'. We recommend that solubility be defined as the overall mole fraction of solute in the pores, since it takes into account the increase in density of the solvent in the pores, and avoids ambiguity in the definition of the pore volume.

The Comparison of Two Forms of a Classroom Simulation Test Designed To Enhance Future Teachers Self-Definition and Teaching Style. Final Report.

ERIC Educational Resources Information Center

Garrison, Jesse H.; Kersh, Bert Y.

The experiment reported in this document is based on the work of Garrison and others in developing a testing and interviewing procedure designed to enable increased self-definition on the part of prospective teachers and earlier development of appropriate and effective teaching styles. Three groups of elementary education majors were involved in…

Early Design Choices: Capture, Model, Integrate, Analyze, Simulate

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2004-01-01

I. Designs are constructed incrementally to meet requirements and solve problems: a) Requirements types: objectives, scenarios, constraints, ilities. etc. b) Problem/issue types: risk/safety, cost/difficulty, interaction, conflict, etc. II. Capture requirements, problems and solutions: a) Collect design and analysis products and make them accessible for integration and analysis; b) Link changes in design requirements, problems and solutions; and c) Harvest design data for design models and choice structures. III. System designs are constructed by multiple groups designing interacting subsystems a) Diverse problems, choice criteria, analysis methods and point solutions. IV. Support integration and global analysis of repercussions: a) System implications of point solutions; b) Broad analysis of interactions beyond totals of mass, cost, etc.

The Challenge: To Change the Odds for Youth by Changing the Way We Do Business--All Youth Ready for College, Work & Life

ERIC Educational Resources Information Center

Forum for Youth Investment, 2008

2008-01-01

The Challenge is the definitive guide to the key ideas and resources behind Ready by 21. The Ready by 21 challenge aims to develop a solution for a common dilemma--too few young people are entering adulthood ready and our collective efforts to make a difference are far too fragmented to have a big impact. As part of the Forum's solution, leaders…

Light Scattering by Coated Sphere Immersed in Absorbing Medium: A Comparison between the FDTD and Analytic Solutions

NASA Technical Reports Server (NTRS)

Sun, W.; Loeb, N. G.; Fu, Q.

2004-01-01

A recently developed finite-difference time domain scheme is examined using the exact analytic solutions for light scattering by a coated sphere immersed in an absorbing medium. The relative differences are less than 1% in the extinction, scattering, and absorption efficiencies and less than 5% in the scattering phase functions. The definition of apparent single-scattering properties is also discussed. (C) 2003 Elsevier Ltd. All rights reserved.

Global solutions to the equation of thermoelasticity with fading memory

NASA Astrophysics Data System (ADS)

Okada, Mari; Kawashima, Shuichi

2017-07-01

We consider the initial-history value problem for the one-dimensional equation of thermoelasticity with fading memory. It is proved that if the data are smooth and small, then a unique smooth solution exists globally in time and converges to the constant equilibrium state as time goes to infinity. Our proof is based on a technical energy method which makes use of the strict convexity of the entropy function and the properties of strongly positive definite kernels.

Optimization of Heterogeneous UAV Communications Using the Multiobjective Quadratic Assignment Problem

DTIC Science & Technology

2004-03-01

definition efficiency is the amount of the time that the processing element is gainfully employed , which is calculated by using the ratio of the... employs an interest- ing form of tournament selection called Pareto domination tournaments. Two members of the population are chosen at random and they...it has a set of solutions and using a template for each solution is not feasible. So the MOMGA employs a different competitive template during the

2017 Cardiovascular and Stroke Endpoint Definitions for Clinical Trials.

PubMed

Hicks, Karen A; Mahaffey, Kenneth W; Mehran, Roxana; Nissen, Steven E; Wiviott, Stephen D; Dunn, Billy; Solomon, Scott D; Marler, John R; Teerlink, John R; Farb, Andrew; Morrow, David A; Targum, Shari L; Sila, Cathy A; Thanh Hai, Mary T; Jaff, Michael R; Joffe, Hylton V; Cutlip, Donald E; Desai, Akshay S; Lewis, Eldrin F; Gibson, C Michael; Landray, Martin J; Lincoff, A Michael; White, Christopher J; Brooks, Steven S; Rosenfield, Kenneth; Domanski, Michael J; Lansky, Alexandra J; McMurray, John J V; Tcheng, James E; Steinhubl, Steven R; Burton, Paul; Mauri, Laura; O'Connor, Christopher M; Pfeffer, Marc A; Hung, H M James; Stockbridge, Norman L; Chaitman, Bernard R; Temple, Robert J

2018-03-06

This publication describes uniform definitions for cardiovascular and stroke outcomes developed by the Standardized Data Collection for Cardiovascular Trials Initiative and the U.S. Food and Drug Administration (FDA). The FDA established the Standardized Data Collection for Cardiovascular Trials Initiative in 2009 to simplify the design and conduct of clinical trials intended to support marketing applications. The writing committee recognizes that these definitions may be used in other types of clinical trials and clinical care processes where appropriate. Use of these definitions at the FDA has enhanced the ability to aggregate data within and across medical product development programs, conduct meta-analyses to evaluate cardiovascular safety, integrate data from multiple trials, and compare effectiveness of drugs and devices. Further study is needed to determine whether prospective data collection using these common definitions improves the design, conduct, and interpretability of the results of clinical trials. Copyright © 2018 American College of Cardiology Foundation and American Heart Association, Inc. Published by Elsevier Inc. All rights reserved.

Class of Exact Solutions for a Cosmological Model of Unified Gravitational and Quintessence Fields

NASA Astrophysics Data System (ADS)

Asenjo, Felipe A.; Hojman, Sergio A.

2017-07-01

A new approach to tackle Einstein equations for an isotropic and homogeneous Friedmann-Robertson-Walker Universe in the presence of a quintessence scalar field is devised. It provides a way to get a simple exact solution to these equations. This solution determines the quintessence potential uniquely and it differs from solutions which have been used to study inflation previously. It relays on a unification of geometry and dark matter implemented through the definition of a functional relation between the scale factor of the Universe and the quintessence field. For a positive curvature Universe, this solution produces perpetual accelerated expansion rate of the Universe, while the Hubble parameter increases abruptly, attains a maximum value and decreases thereafter. The behavior of this cosmological solution is discussed and its main features are displayed. The formalism is extended to include matter and radiation.

Defining Patient Centric Pharmaceutical Drug Product Design.

PubMed

Stegemann, Sven; Ternik, Robert L; Onder, Graziano; Khan, Mansoor A; van Riet-Nales, Diana A

2016-09-01

The term "patient centered," "patient centric," or "patient centricity" is increasingly used in the scientific literature in a wide variety of contexts. Generally, patient centric medicines are recognized as an essential contributor to healthy aging and the overall patient's quality of life and life expectancy. Besides the selection of the appropriate type of drug substance and strength for a particular indication in a particular patient, due attention must be paid that the pharmaceutical drug product design is also adequately addressing the particular patient's needs, i.e., assuring adequate patient adherence and the anticipate drug safety and effectiveness. Relevant pharmaceutical design aspects may e.g., involve the selection of the route of administration, the tablet size and shape, the ease of opening the package, the ability to read the user instruction, or the ability to follow the recommended (in-use) storage conditions. Currently, a harmonized definition on patient centric drug development/design has not yet been established. To stimulate scientific research and discussions and the consistent interpretation of test results, it is essential that such a definition is established. We have developed a first draft definition through various rounds of discussions within an interdisciplinary AAPS focus group of experts. This publication summarizes the outcomes and is intended to stimulate further discussions with all stakeholders towards a common definition of patient centric pharmaceutical drug product design that is useable across all disciplines involved.

The design and methodology of premature ejaculation interventional studies

PubMed Central

2016-01-01

Large well-designed clinical efficacy and safety randomized clinical trials (RCTs) are required to achieve regulatory approval of new drug treatments. The objective of this article is to make recommendations for the criteria for defining and selecting the clinical trial study population, design and efficacy outcomes measures which comprise ideal premature ejaculation (PE) interventional trial methodology. Data on clinical trial design, epidemiology, definitions, dimensions and psychological impact of PE was reviewed, critiqued and incorporated into a series of recommendations for standardisation of PE clinical trial design, outcome measures and reporting using the principles of evidence based medicine. Data from PE interventional studies are only reliable, interpretable and capable of being generalised to patients with PE, when study populations are defined by the International Society for Sexual Medicine (ISSM) multivariate definition of PE. PE intervention trials should employ a double-blind RCT methodology and include placebo control, active standard drug control, and/or dose comparison trials. Ejaculatory latency time (ELT) and subject/partner outcome measures of control, personal/partner/relationship distress and other study-specific outcome measures should be used as outcome measures. There is currently no published literature which identifies a clinically significant threshold response to intervention. The ISSM definition of PE reflects the contemporary understanding of PE and represents the state-of-the-art multi-dimensional definition of PE and is recommended as the basis of diagnosis of PE for all PE clinical trials. PMID:27652224

The Students' Take on the Epsilon-Delta Definition of a Limit

ERIC Educational Resources Information Center

Fernandez, Eileen

2004-01-01

This paper describes a sequence of lessons from two Calculus I classes for teaching the epsilon-delta definition of a limit. In these lessons, the author elicited students' misconceptions and perceptions of this definition through a reading/writing lesson and then used these student ideas to design a lesson aimed at addressing these misconceptions…

Definitions of Success: Girls at Miss Porter's School Share Their Hopes, Dreams, and Fears

ERIC Educational Resources Information Center

Windsor, Katherine Gladstone

2010-01-01

This study explores how girls currently enrolled and recently graduated from Miss Porter's School, Farmington, Connecticut, define success and the role gender plays in their definition(s). Data were collected from semi-structured student interviews, written responses by the students to a prompt designed to elicit personal conceptions of success,…

Space Transportation System Availability Requirements and Its Influencing Attributes Relationships

NASA Technical Reports Server (NTRS)

Rhodes, Russel E.; Adams, TImothy C.

2008-01-01

It is essential that management and engineering understand the need for an availability requirement for the customer's space transportation system as it enables the meeting of his needs, goal, and objectives. There are three types of availability, e.g., operational availability, achieved availability, or inherent availability. The basic definition of availability is equal to the mean uptime divided by the sum of the mean uptime plus the mean downtime. The major difference is the inclusiveness of the functions within the mean downtime and the mean uptime. This paper will address tIe inherent availability which only addresses the mean downtime as that mean time to repair or the time to determine the failed article, remove it, install a replacement article and verify the functionality of the repaired system. The definitions of operational availability include the replacement hardware supply or maintenance delays and other non-design factors in the mean downtime. Also with inherent availability the mean uptime will only consider the mean time between failures (other availability definitions consider this as mean time between maintenance - preventive and corrective maintenance) that requires the repair of the system to be functional. It is also essential that management and engineering understand all influencing attributes relationships to each other and to the resultant inherent availability requirement. This visibility will provide the decision makers with the understanding necessary to place constraints on the design definition for the major drivers that will determine the inherent availability, safety, reliability, maintainability, and the life cycle cost of the fielded system provided the customer. This inherent availability requirement may be driven by the need to use a multiple launch approach to placing humans on the moon or the desire to control the number of spare parts required to support long stays in either orbit or on the surface of the moon or mars. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability, but also provide the capability to bound the variables providing engineering the insight required to control the system's engineering solution. An example of this visibility will be the need to provide integration of similar discipline functions to allow control of the total parts count of the space transportation system. Also the relationship visibility of selecting a reliability requirement will place a constraint on parts count to achieve a given inherent availability requirement or accepting a larger parts count with the resulting higher reliability requirement. This paper will provide an understanding for the relationship of mean repair time (mean downtime) to maintainability, e.g., accessibility for repair, and both mean time between failure, e.g., reliability of hardware and the system inherent availability. Having an understanding of these relationships and resulting requirements before starting the architectural design concept definition will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable increased life cycle cost of the fielded space transportation system.

Stabilized High-order Galerkin Methods Based on a Parameter-free Dynamic SGS Model for LES

DTIC Science & Technology

2015-01-01

stresses obtained via Dyn-SGS are residual-based, the effect of the artificial diffusion is minimal in the regions where the solution is smooth. The direct...used in the analysis of the results rather than in the definition and analysis of the LES equations described from now on. 2.1 LES and the Dyn-SGS model... definition is sucient given the scope of the current study; nevertheless, a more proper defi- nition of for LES should be used in future work

Study on the number density of nanobubbles at varying concentration of ethanol in ethanol-water solution

NASA Astrophysics Data System (ADS)

Rajib, Md. Mahadi; Farzeen, Parisa; Ali, Mohammad

2017-12-01

In recent years, nanobubble technology has drawn great attention due to its extensive incorporation to substantial aspects of science and technology such as water treatment, drug delivery enhancement to cells, solvent and nutritional supplements manufacturing and many others. Bulk nanobubbles may be present in most aqueous solutions, possibly being constantly created by cosmic radiation and agitation and surface nanobubbles are present at most surfaces [1,2]. But, for utilizing these nanobubbles in a definitive way it's important to know whether an added amount of solution making substance has constructive or adverse effect on the nanobubble. In this work, the change of number density of nanobubbles in ethanol-water solution was studied by varying the ethanol concentration.

A parallel offline CFD and closed-form approximation strategy for computationally efficient analysis of complex fluid flows

NASA Astrophysics Data System (ADS)

Allphin, Devin

Computational fluid dynamics (CFD) solution approximations for complex fluid flow problems have become a common and powerful engineering analysis technique. These tools, though qualitatively useful, remain limited in practice by their underlying inverse relationship between simulation accuracy and overall computational expense. While a great volume of research has focused on remedying these issues inherent to CFD, one traditionally overlooked area of resource reduction for engineering analysis concerns the basic definition and determination of functional relationships for the studied fluid flow variables. This artificial relationship-building technique, called meta-modeling or surrogate/offline approximation, uses design of experiments (DOE) theory to efficiently approximate non-physical coupling between the variables of interest in a fluid flow analysis problem. By mathematically approximating these variables, DOE methods can effectively reduce the required quantity of CFD simulations, freeing computational resources for other analytical focuses. An idealized interpretation of a fluid flow problem can also be employed to create suitably accurate approximations of fluid flow variables for the purposes of engineering analysis. When used in parallel with a meta-modeling approximation, a closed-form approximation can provide useful feedback concerning proper construction, suitability, or even necessity of an offline approximation tool. It also provides a short-circuit pathway for further reducing the overall computational demands of a fluid flow analysis, again freeing resources for otherwise unsuitable resource expenditures. To validate these inferences, a design optimization problem was presented requiring the inexpensive estimation of aerodynamic forces applied to a valve operating on a simulated piston-cylinder heat engine. The determination of these forces was to be found using parallel surrogate and exact approximation methods, thus evidencing the comparative benefits of this technique. For the offline approximation, latin hypercube sampling (LHS) was used for design space filling across four (4) independent design variable degrees of freedom (DOF). Flow solutions at the mapped test sites were converged using STAR-CCM+ with aerodynamic forces from the CFD models then functionally approximated using Kriging interpolation. For the closed-form approximation, the problem was interpreted as an ideal 2-D converging-diverging (C-D) nozzle, where aerodynamic forces were directly mapped by application of the Euler equation solutions for isentropic compression/expansion. A cost-weighting procedure was finally established for creating model-selective discretionary logic, with a synthesized parallel simulation resource summary provided.

Health facilities humanisation: design guidelines supported by statistical evidence.

PubMed

Bosia, Daniela; Marino, Donatella; Peretti, Gabriella

2016-01-01

Healthcare building humanisation is currently a widely debated issue and the development of patient centered and evidence based design is growing worldwide. Many international health organizations and researchers understand the importance of Patient Centred Design and leading architects incorporate it into the design process. In Italy this design approach is still at an early stage. The article refers to research commissioned by the Italian Health Ministry and carried out by R. Del Nord (Università degli Studi di Firenze) and G. Peretti (Politecnico di Torino) with their collaborators. The scope of the research was the definition of design guidelines for healthcare facilities humanisation. The methodology framework adopted is the well established need and performance approach in architectural design. The article deals with the results of statistical investigations for the definition and ranking of users' needs and the consistent expression of their requirements. The investigations were carried out with the cooperation of psychologists of the Università degli Studi di Torino and researchers of the Università degli Studi di Cagliari. The proposed evaluation system allows ranking of health facilities according to the level of humanisation achieved. The statistical investigation evidence collected allowed the definition of humanisation design guidelines for health-care facilities and for the assessment of their specific level of humanisation.

40 CFR 63.341 - Definitions and nomenclature.

Code of Federal Regulations, 2010 CFR

2010-07-01

... electrical insulation) using a chromic acid solution. In chromium anodizing, the part to be anodized acts as... chromium anodizing: rectifiers fitted with controls to allow for voltage adjustments, heat exchanger... electroplating: Rectifiers, anodes, heat exchanger equipment, circulation pumps, and air agitation systems...

40 CFR 415.161 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Sodium Chloride Production... apply to this subpart. (b) The term product shall mean sodium chloride. (c) The term bitterns shall mean the saturated brine solution remaining after precipitation of sodium chloride in the solar evaporation...

Computational Fluid Dynamics: Past, Present, And Future

NASA Technical Reports Server (NTRS)

Kutler, Paul

1988-01-01

Paper reviews development of computational fluid dynamics and explores future prospects of technology. Report covers such topics as computer technology, turbulence, development of solution methodology, developemnt of algorithms, definition of flow geometries, generation of computational grids, and pre- and post-data processing.

7 CFR 966.323 - Handling regulation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... greenhouse tomatoes. Specialty packed red ripe tomatoes, yellow meated tomatoes, and single layer and two layer place packed tomatoes are exempt from the container net weight requirements specified in paragraph...) Definitions. Hydroponic tomatoes means tomatoes grown in solution without soil; greenhouse tomatoes means...

7 CFR 966.323 - Handling regulation.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; and greenhouse tomatoes. Specialty packed red ripe tomatoes, yellow meated tomatoes, and single layer and two layer place packed tomatoes are exempt from the container net weight requirements specified in...) Definitions. Hydroponic tomatoes means tomatoes grown in solution without soil; greenhouse tomatoes means...

7 CFR 966.323 - Handling regulation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... greenhouse tomatoes. Specialty packed red ripe tomatoes, yellow meated tomatoes, and single layer and two layer place packed tomatoes are exempt from the container net weight requirements specified in paragraph...) Definitions. Hydroponic tomatoes means tomatoes grown in solution without soil; greenhouse tomatoes means...

A Framework to Support the Sharing and Reuse of Computable Phenotype Definitions Across Health Care Delivery and Clinical Research Applications.

PubMed

Richesson, Rachel L; Smerek, Michelle M; Blake Cameron, C

2016-01-01

The ability to reproducibly identify clinically equivalent patient populations is critical to the vision of learning health care systems that implement and evaluate evidence-based treatments. The use of common or semantically equivalent phenotype definitions across research and health care use cases will support this aim. Currently, there is no single consolidated repository for computable phenotype definitions, making it difficult to find all definitions that already exist, and also hindering the sharing of definitions between user groups. Drawing from our experience in an academic medical center that supports a number of multisite research projects and quality improvement studies, we articulate a framework that will support the sharing of phenotype definitions across research and health care use cases, and highlight gaps and areas that need attention and collaborative solutions. An infrastructure for re-using computable phenotype definitions and sharing experience across health care delivery and clinical research applications includes: access to a collection of existing phenotype definitions, information to evaluate their appropriateness for particular applications, a knowledge base of implementation guidance, supporting tools that are user-friendly and intuitive, and a willingness to use them. We encourage prospective researchers and health administrators to re-use existing EHR-based condition definitions where appropriate and share their results with others to support a national culture of learning health care. There are a number of federally funded resources to support these activities, and research sponsors should encourage their use.

A Framework to Support the Sharing and Reuse of Computable Phenotype Definitions Across Health Care Delivery and Clinical Research Applications

PubMed Central

Richesson, Rachel L.; Smerek, Michelle M.; Blake Cameron, C.

2016-01-01

Introduction: The ability to reproducibly identify clinically equivalent patient populations is critical to the vision of learning health care systems that implement and evaluate evidence-based treatments. The use of common or semantically equivalent phenotype definitions across research and health care use cases will support this aim. Currently, there is no single consolidated repository for computable phenotype definitions, making it difficult to find all definitions that already exist, and also hindering the sharing of definitions between user groups. Method: Drawing from our experience in an academic medical center that supports a number of multisite research projects and quality improvement studies, we articulate a framework that will support the sharing of phenotype definitions across research and health care use cases, and highlight gaps and areas that need attention and collaborative solutions. Framework: An infrastructure for re-using computable phenotype definitions and sharing experience across health care delivery and clinical research applications includes: access to a collection of existing phenotype definitions, information to evaluate their appropriateness for particular applications, a knowledge base of implementation guidance, supporting tools that are user-friendly and intuitive, and a willingness to use them. Next Steps: We encourage prospective researchers and health administrators to re-use existing EHR-based condition definitions where appropriate and share their results with others to support a national culture of learning health care. There are a number of federally funded resources to support these activities, and research sponsors should encourage their use. PMID:27563686