Considering RNAi experimental design in parasitic helminths.

PubMed

Dalzell, Johnathan J; Warnock, Neil D; McVeigh, Paul; Marks, Nikki J; Mousley, Angela; Atkinson, Louise; Maule, Aaron G

2012-04-01

Almost a decade has passed since the first report of RNA interference (RNAi) in a parasitic helminth. Whilst much progress has been made with RNAi informing gene function studies in disparate nematode and flatworm parasites, substantial and seemingly prohibitive difficulties have been encountered in some species, hindering progress. An appraisal of current practices, trends and ideals of RNAi experimental design in parasitic helminths is both timely and necessary for a number of reasons: firstly, the increasing availability of parasitic helminth genome/transcriptome resources means there is a growing need for gene function tools such as RNAi; secondly, fundamental differences and unique challenges exist for parasite species which do not apply to model organisms; thirdly, the inherent variation in experimental design, and reported difficulties with reproducibility undermine confidence. Ideally, RNAi studies of gene function should adopt standardised experimental design to aid reproducibility, interpretation and comparative analyses. Although the huge variations in parasite biology and experimental endpoints make RNAi experimental design standardization difficult or impractical, we must strive to validate RNAi experimentation in helminth parasites. To aid this process we identify multiple approaches to RNAi experimental validation and highlight those which we deem to be critical for gene function studies in helminth parasites.

Simulation of Flight-Type Engine Fan Noise in the NASA-Lewis 9X15 Anechoic Wind Tunnel

NASA Technical Reports Server (NTRS)

Heidmann, M. F.; Dietrich, D. A.

1976-01-01

Flight type noise as contrasted to the usual ground static test noise exhibits substantial reductions in the time unsteadiness of tone noise, and in the mean level of tones calculated to be nonpropagating or cut-off. A model fan designed with cuttoff of the fundamental tone was acoustically tested in the anechoic wind tunnel under both static and tunnel flow conditions. The properties that characterize flight type noise were progressively simulated with increasing tunnel flow. The distinctly lobed directivity pattern of propagating rotor/stator interaction modes was also observed. Excess noise attributed to the ingestion of the flow disturbances that prevail near most static test facilities is substantially reduced with tunnel flow.

Preliminary Evaluation of Visual and Flight Performance of Three Current Multifocal Contact Lens Designs for Presbyopic US Army Aviators

DTIC Science & Technology

2005-01-01

absolute emmetropia. Up to a substantial 25% of the aviation population develops ametropia requiring the use of spectacles or other refractive correction...to determine statistical differences in visual performance. The types of contact lenses were compared in general to determine whether there was any...Lomb multi- focal, and 187 (sd=25) for the Ciba progressive. There was not a statistically significant difference for high luminance contrast

Engineering in complex systems.

PubMed

Bujara, Matthias; Panke, Sven

2010-10-01

The implementation of the engineering design cycle of measure, model, manipulate would drastically enhance the success rate of biotechnological designs. Recent progress for the three elements suggests that the scope of the traditional engineering paradigm in biotechnology is expanding. Substantial advances were made in dynamic in vivo analysis of metabolism, which is essential for the accurate prediction of metabolic pathway behavior. Novel methods that require variable degrees of system knowledge facilitate metabolic system manipulation. The combinatorial testing of pre-characterized parts is particularly promising, because it can profit from automation and limits the search space. Finally, conceptual advances in orthogonalizing cells should enhance the reliability of engineering designs in the future. Coupled to improved in silico models of metabolism, these advances should allow a more rational design of metabolic systems. Copyright © 2010 Elsevier Ltd. All rights reserved.

The Priority and Challenge of High-Power Performance of Low-Platinum Proton-Exchange Membrane Fuel Cells.

PubMed

Kongkanand, Anusorn; Mathias, Mark F

2016-04-07

Substantial progress has been made in reducing proton-exchange membrane fuel cell (PEMFC) cathode platinum loadings from 0.4-0.8 mgPt/cm(2) to about 0.1 mgPt/cm(2). However, at this level of cathode Pt loading, large performance loss is observed at high-current density (>1 A/cm(2)), preventing a reduction in the overall stack cost. This next developmental step is being limited by the presence of a resistance term exhibited at these lower Pt loadings and apparently due to a phenomenon at or near the catalyst surface. This issue can be addressed through the design of catalysts with high and stable Pt dispersion as well as through development and implementation of ionomers designed to interact with Pt in a way that does not constrain oxygen reduction reaction rates. Extrapolating from progress made in past decades, we are optimistic that the concerted efforts of materials and electrode designers can resolve this issue, thus enabling a large step toward fuel cell vehicles that are affordable for the mass market.

Evaluating the Genetic, Hormonal, and Exogenous Factors Affecting Somatic Copy Number Variation in Breast Cancer

DTIC Science & Technology

2016-10-01

progress in subaim 1a, substantially improving the design of our proposed transgenic animal, the “deletion reporter mouse”, and are finalizing cloning...of necessary components. We expect to submit embryonic stem cells to the transgenic facility within the next few months. Furthermore, subaim 1b is...different mammary epithelial subpopulations. We will breed the reporter mouse created in aim 1 (or the CAG/UBC-GFP mouse) with BRCA1+/- and ATM+/- mutant

Design colloidal particle morphology and self-assembly for coating applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Shan; Van Dyk, Antony; Maurice, Alvin

The progressive replacement of organic solvent-based coatings by waterborne latex polymer coatings has substantially renovated the coating industry, and generated huge environmental and health benefits. Today, on top of the continuing demand for higher performance and lower costs, the coating industry faces tighter regulation and higher sustainability standards. In addition, the new waterborne coatings have created unique opportunities and challenges in terms of fundamental understanding and research development. To address these challenges, polymer latex binders with diverse particle morphologies have been developed to improve coating performance. Furthermore, colloidal self-assembly has been utilized to help manufacturers make better paint with lessmore » cost. In this report, we review the recent progress in both fundamental study and industrial application in the context of developing new generation architectural coating materials. We introduce the basic concepts in coating materials and showcase several key technologies that have been implemented to improve coating performance. As a result, these technologies also represent the most important considerations in architectural coating design.« less

Design colloidal particle morphology and self-assembly for coating applications

DOE PAGES

Jiang, Shan; Van Dyk, Antony; Maurice, Alvin; ...

2017-05-04

The progressive replacement of organic solvent-based coatings by waterborne latex polymer coatings has substantially renovated the coating industry, and generated huge environmental and health benefits. Today, on top of the continuing demand for higher performance and lower costs, the coating industry faces tighter regulation and higher sustainability standards. In addition, the new waterborne coatings have created unique opportunities and challenges in terms of fundamental understanding and research development. To address these challenges, polymer latex binders with diverse particle morphologies have been developed to improve coating performance. Furthermore, colloidal self-assembly has been utilized to help manufacturers make better paint with lessmore » cost. In this report, we review the recent progress in both fundamental study and industrial application in the context of developing new generation architectural coating materials. We introduce the basic concepts in coating materials and showcase several key technologies that have been implemented to improve coating performance. As a result, these technologies also represent the most important considerations in architectural coating design.« less

Progress in Payload Separation Risk Mitigation for a Deployable Venus Heat Shield

NASA Technical Reports Server (NTRS)

Smith, Brandon P.; Yount, Bryan C.; Venkatapathy, Ethiraj; Stern, Eric C.; Prabhu, Dinesh K.; Litton, Daniel K.

2013-01-01

A deployable decelerator known as the Adaptive Deployable Entry and Placement Technology (ADEPT) offers substantial science and mass savings for the Venus In Situ Explorer (VISE) mission. The lander and science payload must be separated from ADEPT during atmospheric entry. This paper presents a trade study of the separation system concept of operations and provides a conceptual design of the baseline: aft-separation with a subsonic parachute. Viability of the separation system depends on the vehicle's dynamic stability characteristics during deceleration from supersonic to subsonic speeds. A trajectory sensitivity study presented shows that pitch damping and Venusian winds drive stability prior to parachute deployment, while entry spin rate is not a driver of stability below Mach 5. Additionally, progress in free-flight CFD techniques capable of computing aerodynamic damping parameters is presented. Exploratory simulations of ADEPT at a constant speed of Mach number of 0.8 suggest the vehicle may have an oscillation limit cycle near 5 angle-of-attack. The proposed separation system conceptual design is thought to be viable.

State budget transfers to Health Insurance to expand coverage to people outside formal sector work in Latin America.

PubMed

Mathauer, Inke; Behrendt, Thorsten

2017-02-16

Contributory social health insurance for formal sector employees only has proven challenging for moving towards universal health coverage (UHC). This is because the informally employed and the poor usually remain excluded. One way to expand UHC is to fully or partially subsidize health insurance contributions for excluded population groups through government budget transfers. This paper analyses the institutional design features of such government subsidization arrangements in Latin America and assesses their performance with respect to UHC progress. The aim is to identify UHC conducive institutional design features of such arrangements. A literature search provided the information to analyse institutional design features, with a focus on the following aspects: eligibility/enrolment rules, financing and pooling arrangements, and purchasing and benefit package design. Based on secondary data analysis, UHC progress is assessed in terms of improved population coverage, financial protection and access to needed health care services. Such government subsidization arrangements currently exist in eight countries of Latin America (Bolivia, Chile, Colombia, Costa Rica, Dominican Republic, Mexico, Peru, Uruguay). Institutional design features and UHC related performance vary significantly. Notably, countries with a universalist approach or indirect targeting have higher population coverage rates. Separate pools for the subsidized maintain inequitable access. The relatively large scopes of the benefit packages had a positive impact on financial protection and access to care. In the long term, merging different schemes into one integrated health financing system without opt-out options for the better-off is desirable, while equally expanding eligibility to cover those so far excluded. In the short and medium term, the harmonization of benefit packages could be a priority. UHC progress also depends on substantial supply side investments to ensure the availability of quality services, particularly in rural areas. Future research should generate more evidence on the implementation process and impact of subsidization arrangements on UHC progress.

Chaotic dynamics in accelerator physics

NASA Astrophysics Data System (ADS)

Cary, J. R.

1992-11-01

Substantial progress was made in several areas of accelerator dynamics. We have completed a design of an FEL wiggler with adiabatic trapping and detrapping sections to develop an understanding of longitudinal adiabatic dynamics and to create efficiency enhancements for recirculating free-electron lasers. We developed a computer code for analyzing the critical KAM tori that binds the dynamic aperture in circular machines. Studies of modes that arise due to the interaction of coating beams with a narrow-spectrum impedance have begun. During this research educational and research ties with the accelerator community at large have been strengthened.

Flexible Wing Base Micro Aerial Vehicles: Towards Flight Autonomy: Vision-Based Horizon Detection for Micro Air Vehicles

NASA Technical Reports Server (NTRS)

Nechyba, Michael C.; Ettinger, Scott M.; Ifju, Peter G.; Wazak, Martin

2002-01-01

Recently substantial progress has been made towards design building and testifying remotely piloted Micro Air Vehicles (MAVs). This progress in overcoming the aerodynamic obstacles to flight at very small scales has, unfortunately, not been matched by similar progress in autonomous MAV flight. Thus, we propose a robust, vision-based horizon detection algorithm as the first step towards autonomous MAVs. In this paper, we first motivate the use of computer vision for the horizon detection task by examining the flight of birds (biological MAVs) and considering other practical factors. We then describe our vision-based horizon detection algorithm, which has been demonstrated at 30 Hz with over 99.9% correct horizon identification, over terrain that includes roads, buildings large and small, meadows, wooded areas, and a lake. We conclude with some sample horizon detection results and preview a companion paper, where the work discussed here forms the core of a complete autonomous flight stability system.

Effects of sources of variability on sample sizes required for RCTs, applied to trials of lipid-altering therapies on carotid artery intima-media thickness.

PubMed

Gould, A Lawrence; Koglin, Joerg; Bain, Raymond P; Pinto, Cathy-Anne; Mitchel, Yale B; Pasternak, Richard C; Sapre, Aditi

2009-08-01

Studies measuring progression of carotid artery intima-media thickness (cIMT) have been used to estimate the effect of lipid-modifying therapies cardiovascular event risk. The likelihood that future cIMT clinical trials will detect a true treatment effect is estimated by leveraging results from prior studies. The present analyses assess the impact of between- and within-study variability based on currently published data from prior clinical studies on the likelihood that ongoing or future cIMT trials will detect the true treatment effect of lipid-modifying therapies. Published data from six contemporary cIMT studies (ASAP, ARBITER 2, RADIANCE 1, RADIANCE 2, ENHANCE, and METEOR) including data from a total of 3563 patients were examined. Bayesian and frequentist methods were used to assess the impact of between study variability on the likelihood of detecting true treatment effects on 1-year cIMT progression/regression and to provide a sample size estimate that would specifically compensate for the effect of between-study variability. In addition to the well-described within-study variability, there is considerable between-study variability associated with the measurement of annualized change in cIMT. Accounting for the additional between-study variability decreases the power for existing study designs. In order to account for the added between-study variability, it is likely that future cIMT studies would require a large increase in sample size in order to provide substantial probability (> or =90%) to have 90% power of detecting a true treatment effect.Limitation Analyses are based on study level data. Future meta-analyses incorporating patient-level data would be useful for confirmation. Due to substantial within- and between-study variability in the measure of 1-year change of cIMT, as well as uncertainty about progression rates in contemporary populations, future study designs evaluating the effect of new lipid-modifying therapies on atherosclerotic disease progression are likely to be challenged by large sample sizes in order to demonstrate a true treatment effect.

A review of statistical issues with progression-free survival as an interval-censored time-to-event endpoint.

PubMed

Sun, Xing; Li, Xiaoyun; Chen, Cong; Song, Yang

2013-01-01

Frequent rise of interval-censored time-to-event data in randomized clinical trials (e.g., progression-free survival [PFS] in oncology) challenges statistical researchers in the pharmaceutical industry in various ways. These challenges exist in both trial design and data analysis. Conventional statistical methods treating intervals as fixed points, which are generally practiced by pharmaceutical industry, sometimes yield inferior or even flawed analysis results in extreme cases for interval-censored data. In this article, we examine the limitation of these standard methods under typical clinical trial settings and further review and compare several existing nonparametric likelihood-based methods for interval-censored data, methods that are more sophisticated but robust. Trial design issues involved with interval-censored data comprise another topic to be explored in this article. Unlike right-censored survival data, expected sample size or power for a trial with interval-censored data relies heavily on the parametric distribution of the baseline survival function as well as the frequency of assessments. There can be substantial power loss in trials with interval-censored data if the assessments are very infrequent. Such an additional dependency controverts many fundamental assumptions and principles in conventional survival trial designs, especially the group sequential design (e.g., the concept of information fraction). In this article, we discuss these fundamental changes and available tools to work around their impacts. Although progression-free survival is often used as a discussion point in the article, the general conclusions are equally applicable to other interval-censored time-to-event endpoints.

Evolution of integrated panel structural design and interfaces for PV power plants

NASA Technical Reports Server (NTRS)

Arnett, J. C.; Anderson, A. J.; Robertson, R. E.

1983-01-01

The evolution of integrated photovoltaic (PV) panel design at ARCO Solar is discussed. Historically, framed PV modules of about 1 x 4-ft size were individually mounted in the field on fixed support structures and interconnected electrically with cables to build higher-power arrays. When ARCO Solar saw the opportunity in 1982 to marry its PV modules with state-of-the-art heliostat trackers developed by ARCO Power Systems, it became obvious that mounting individual modules was impractical. For this project, the framed modules were factory-assembled into panels and interconnected with cables before being mounted on the trackers. Since then, ARCO Solar made considerable progress and gained substantial experience in the design and fabrication of large PV panels. Constraints and criteria considered in these design activities included static and dynamic loads; assembly and transportation equipment and logistics, structural and electrical interfaces, and safety and grounding concerns.

Improved injection needles facilitate germline transformation of the buckeye butterfly Junonia coenia.

PubMed

Beaudette, Kahlia; Hughes, Tia M; Marcus, Jeffrey M

2014-01-01

Germline transformation with transposon vectors is an important tool for insect genetics, but progress in developing transformation protocols for butterflies has been limited by high post-injection ova mortality. Here we present an improved glass injection needle design for injecting butterfly ova that increases survival in three Nymphalid butterfly species. Using the needles to genetically transform the common buckeye butterfly Junonia coenia, the hatch rate for injected Junonia ova was 21.7%, the transformation rate was 3%, and the overall experimental efficiency was 0.327%, a substantial improvement over previous results in other butterfly species. Improved needle design and a higher efficiency of transformation should permit the deployment of transposon-based genetic tools in a broad range of less fecund lepidopteran species.

Progress on ten-meter optical receiver telescope

NASA Technical Reports Server (NTRS)

Shaik, Kamran

1992-01-01

A ten-meter hexagonally segmented Cassegrain optical telescope is being considered at the Jet Propulsion Laboratory for use as a research and development facility for optical communications technology. The goal of the study is to demonstrate technology which can eventually be used to develop a network of such telescopes to continuously track and communicate with the spacecraft. Hence, the technology has to be economical enough to allow replication for a ground or space based network. As we need to collect signal photons only, the telescope cost can be substantially reduced by accepting lower image quality. An important design consideration for the telescope is its ability to look very close to the sun. The telescope for optical communications must function during the daytime. Indeed, for some planetary missions it may be necessary that the system be capable of looking within a few degrees of the sun. To enable this, a unique sunshade consisting of hexagonal tubes in precise alignment with the mirror segments has been proposed which will also serve as the support for the secondary. Recent progress on the design and analysis of such an optical reception station is discussed here.

Elastic Stability of Concentric Tube Robots: A Stability Measure and Design Test

PubMed Central

Gilbert, Hunter B.; Hendrick, Richard J.; Webster, Robert J.

2016-01-01

Concentric tube robots are needle-sized manipulators which have been investigated for use in minimally invasive surgeries. It was noted early in the development of these devices that elastic energy storage can lead to rapid snapping motion for designs with moderate to high tube curvatures. Substantial progress has recently been made in the concentric tube robot community in designing snap-free robots, planning stable paths, and characterizing conditions that result in snapping for specific classes of concentric tube robots. However, a general measure for how stable a given robot configuration is has yet to be proposed. In this paper, we use bifurcation and elastic stability theory to provide such a measure, as well as to produce a test for determining whether a given design is snap-free (i.e. whether snapping can occur anywhere in the unloaded robot’s workspace). These results are useful in designing, planning motions for, and controlling concentric tube robots with high curvatures. PMID:27042170

Wave-Rotor-Enhanced Gas Turbine Engine Demonstrator

NASA Technical Reports Server (NTRS)

Welch, Gerard E.; Paxson, Daniel E.; Wilson, Jack; Synder, Philip H.

1999-01-01

The U.S. Army Research Laboratory, NASA Glenn Research Center, and Rolls-Royce Allison are working collaboratively to demonstrate the benefits and viability of a wave-rotor-topped gas turbine engine. The self-cooled wave rotor is predicted to increase the engine overall pressure ratio and peak temperature by 300% and 25 to 30%. respectively, providing substantial improvements in engine efficiency and specific power. Such performance improvements would significantly reduce engine emissions and the fuel logistics trails of armed forces. Progress towards a planned demonstration of a wave-rotor-topped Rolls-Royce Allison model 250 engine has included completion of the preliminary design and layout of the engine, the aerodynamic design of the wave rotor component and prediction of its aerodynamic performance characteristics in on- and off-design operation and during transients, and the aerodynamic design of transition ducts between the wave rotor and the high pressure turbine. The topping cycle increases the burner entry temperature and poses a design challenge to be met in the development of the demonstrator engine.

Elastic Stability of Concentric Tube Robots: A Stability Measure and Design Test.

PubMed

Gilbert, Hunter B; Hendrick, Richard J; Webster, Robert J

2016-02-01

Concentric tube robots are needle-sized manipulators which have been investigated for use in minimally invasive surgeries. It was noted early in the development of these devices that elastic energy storage can lead to rapid snapping motion for designs with moderate to high tube curvatures. Substantial progress has recently been made in the concentric tube robot community in designing snap-free robots, planning stable paths, and characterizing conditions that result in snapping for specific classes of concentric tube robots. However, a general measure for how stable a given robot configuration is has yet to be proposed. In this paper, we use bifurcation and elastic stability theory to provide such a measure, as well as to produce a test for determining whether a given design is snap-free (i.e. whether snapping can occur anywhere in the unloaded robot's workspace). These results are useful in designing, planning motions for, and controlling concentric tube robots with high curvatures.

The Wide-Field Imaging Interferometry Testbed: Recent Progress

NASA Technical Reports Server (NTRS)

Rinehart, Stephen A.

2010-01-01

The Wide-Field Imaging Interferometry Testbed (WIIT) at NASA's Goddard Space Flight Center was designed to demonstrate the practicality and application of techniques for wide-field spatial-spectral ("double Fourier") interferometry. WIIT is an automated system, and it is now producing substantial amounts of high-quality data from its state-of-the-art operating environment, Goddard's Advanced Interferometry and Metrology Lab. In this paper, we discuss the characterization and operation of the testbed and present the most recent results. We also outline future research directions. A companion paper within this conference discusses the development of new wide-field double Fourier data analysis algorithms.

Conversion of Azides into Diazo Compounds in Water

PubMed Central

Chou, Ho-Hsuan; Raines, Ronald T.

2013-01-01

Diazo compounds are in widespread use in synthetic organic chemistry, but have untapped potential in chemical biology. We report on the design and optimization of a phosphinoester that mediates the efficient conversion of azides into diazo compounds in phosphate buffer at neutral pH and room temperature. High yields are maintained in the presence of common nucleophilic or electrophilic functional groups, and reaction progress can be monitored by colorimetry. As azido groups are easy to install and maintain in biopolymers or their ligands, this new mode of azide reactivity could have substantial utility in chemical biology. PMID:24053717

LSST Telescope and Optics Status

NASA Astrophysics Data System (ADS)

Krabbendam, Victor; Gressler, W. J.; Andrew, J. R.; Barr, J. D.; DeVries, J.; Hileman, E.; Liang, M.; Neill, D. R.; Sebag, J.; Wiecha, O.; LSST Collaboration

2011-01-01

The LSST Project continues to advance the design and development of an observatory system capable of capturing 20,000 deg2 of the sky in six wavebands over ten years. Optical fabrication of the unique M1/M3 monolithic mirror has entered final front surface optical processing. After substantial grinding to remove 5 tons of excess glass above the M3 surface, a residual of a single spin casting, both distinct optical surfaces are now clearly evident. Loose abrasive grinding has begun and polishing is to occur during 2011 and final optical testing is planned in early 2012. The M1/M3 telescope cell and internal component designs have matured to support on telescope operational requirements and off telescope coating needs. The mirror position system (hardpoint actuators) and mirror support system (figure actuator) designs have developed through internal laboratory analysis and testing. Review of thermal requirements has assisted with definition of a thermal conditioning and control system. Pre-cooling the M1/M3 substrate will enable productive observing during the large temperature swing often seen at twilight. The M2 ULE™ substrate is complete and lies in storage waiting for additional funding to enable final optical polishing. This 3.5m diameter, 100mm thick meniscus substrate has been ground to within 40 microns of final figure. Detailed design of the telescope mount, including subflooring, has been developed. Finally, substantial progress has been achieved on the facility design. In early 2010, LSST contracted with ARCADIS Geotecnica Consultores, a Santiago based engineering firm to lead the formal architectural design effort for the summit facility.

Are the lowest-cost healthful food plans culturally and socially acceptable?

PubMed Central

Maillot, Matthieu; Darmon, Nicole; Drewnowski, Adam

2014-01-01

Objective Nutritious yet inexpensive foods do exist. However, many such foods are rejected by the low-income consumer. Is it because their use violates unspoken social norms? The present study was designed to assess the variety and cost of the lowest-cost market basket of foods that simultaneously met required dietary standards and progressively stricter consumption constraints. Design A mathematical optimisation model was used to develop the lowest-cost food plans to meet three levels of nutritional requirements and seven levels of consumption constraints. Subjects: The nationally representative INCA (National Individual Survey of Food Consumption) dietary survey study of 1332 adults provided population estimates of food consumption patterns in France. Food plan costs were based on retail food prices. Results The lowest-cost food plans that provided 9204 kJ/d (2200 kcal/d) for men and 7531 kJ/d (1800 kcal/d) for women and met specified dietary standards could be obtained for ,1?50 h/d. The progressive imposition of consumption constraints designed to create more mainstream French diets sharply increased food plan costs, without improving nutritional value. Conclusions Minimising diet costs, while meeting nutrition standards only, led to food plans that provided little variety and deviated substantially from social norms. Aligning the food plan with mainstream consumption led to higher costs. Food plans designed for low-income groups need to be socially acceptable as well as affordable and nutritious. PMID:20105388

Magnetic bearings: Fifty years of progress

NASA Technical Reports Server (NTRS)

Swann, Michael K.

1993-01-01

Magnetic bearings are just beginning to be flown in spacecraft systems, but their development spans more than 50 years. The promise of completely noncontacting, unlubricated rotating systems operating at speeds substantially beyond the range of conventional bearings, and with no wear and virtually no vibration, has provided the incentive to develop magnetic bearing technology for many diverse applications. Earnshaw theorized in 1842 that stable magnetic suspension is not possible in all three spatial directions unless the magnetic field is actively controlled. Since that time, researchers have attempted to successfully support spinning rotors in a stable manner. Development of magnetic suspension systems over the past fifty years has included progress on both passive (permanent magnet) and active (electromagnet) systems. The improvements in bearing load capacity, stiffness, and damping characteristics are traced. The trends in rotor size, rotational kinetic energy, and improvements in active control systems capabilities are also reviewed. Implications of superconductivity on suspension system design and performance are discussed.

Deep Borehole Disposal Safety Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, Geoffrey A.; Stein, Emily; Price, Laura L.

This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept.more » It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.« less

The Reality of Well-Being-Focused Design in Dementia Care: A Case Study of Acute Dementia Wards in the United Kingdom.

PubMed

Catt, Megan; Giridharan, Renganathan

2018-01-01

The study explored design for well-being within dementia care by investigating the adoption of well-being-focused design in real-world practice, through observing National Health Service (NHS) wards. Design for well-being is an approach that considers the psychological and physiological effects of architecture to improve health and well-being. The high psychological care requirement for dementia patients makes them a significant group to study in the evaluation of current hospital facilities. A literature review was conducted to frame the current theoretical perception of the key characteristics of a good environment for dementia care. A framework was generated to summarize and used as an assessment tool in a series of observational visits to NHS wards. Interviews with clinical staff focused on care outcomes and practicalities of implementing well-being-focused design, considering the historical and economical context. Key findings from the observations and interviews were analyzed for recurring themes. The ward observations and interviews provided insight into the current progression of well-being-led design in NHS hospitals in England. The research highlights key areas of success and factors that inhibit further progression. The case studies showed a good degree of ambition to utilize well-being-focused design, with belief among staff that the physical environment has a substantial role in the health and well-being of patients. Staff also felt that this approach is most effective for those in the less advanced stages of dementia. Despite the high level of support, the current degree of implementation appears to be varied.

Noncovalent assembly. A rational strategy for the realization of chain-growth supramolecular polymerization.

PubMed

Kang, Jiheong; Miyajima, Daigo; Mori, Tadashi; Inoue, Yoshihisa; Itoh, Yoshimitsu; Aida, Takuzo

2015-02-06

Over the past decade, major progress in supramolecular polymerization has had a substantial effect on the design of functional soft materials. However, despite recent advances, most studies are still based on a preconceived notion that supramolecular polymerization follows a step-growth mechanism, which precludes control over chain length, sequence, and stereochemical structure. Here we report the realization of chain-growth polymerization by designing metastable monomers with a shape-promoted intramolecular hydrogen-bonding network. The monomers are conformationally restricted from spontaneous polymerization at ambient temperatures but begin to polymerize with characteristics typical of a living mechanism upon mixing with tailored initiators. The chain growth occurs stereoselectively and therefore enables optical resolution of a racemic monomer. Copyright © 2015, American Association for the Advancement of Science.

31 CFR 341.8 - Payment or redemption during lifetime of owner.

Code of Federal Regulations, 2012 CFR

2012-07-01

... progressive. (5) Damage to the brain or brain abnormality which has resulted in severe loss of judgment... substantial, gainful activity: (1) Loss of use of two limbs. (2) Certain progressive diseases which have...

31 CFR 341.8 - Payment or redemption during lifetime of owner.

Code of Federal Regulations, 2011 CFR

2011-07-01

... progressive. (5) Damage to the brain or brain abnormality which has resulted in severe loss of judgment... substantial, gainful activity: (1) Loss of use of two limbs. (2) Certain progressive diseases which have...

31 CFR 341.8 - Payment or redemption during lifetime of owner.

Code of Federal Regulations, 2013 CFR

2013-07-01

... progressive. (5) Damage to the brain or brain abnormality which has resulted in severe loss of judgment... substantial, gainful activity: (1) Loss of use of two limbs. (2) Certain progressive diseases which have...

LSST telescope and site status

NASA Astrophysics Data System (ADS)

Gressler, William J.

2016-07-01

The Large Synoptic Survey Telescope (LSST) Project1 received its construction authorization from the National Science Foundation in August 2014. The Telescope and Site (T and S) group has made considerable progress towards completion in subsystems required to support the scope of the LSST science mission. The LSST goal is to conduct a wide, fast, deep survey via a 3-mirror wide field of view optical design, a 3.2-Gpixel camera, and an automated data processing system. The summit facility is currently under construction on Cerro Pachón in Chile, with major vendor subsystem deliveries and integration planned over the next several years. This paper summarizes the status of the activities of the T and S group, tasked with design, analysis, and construction of the summit and base facilities and infrastructure necessary to control the survey, capture the light, and calibrate the data. All major telescope work package procurements have been awarded to vendors and are in varying stages of design and fabrication maturity and completion. The unique M1M3 primary/tertiary mirror polishing effort is completed and the mirror now resides in storage waiting future testing. Significant progress has been achieved on all the major telescope subsystems including the summit facility, telescope mount assembly, dome, hexapod and rotator systems, coating plant, base facility, and the calibration telescope. In parallel, in-house efforts including the software needed to control the observatory such as the scheduler and the active optics control, have also seen substantial advancement. The progress and status of these subsystems and future LSST plans during this construction phase are presented.

Intraobserver and Interobserver Agreement of Structural and Functional Software Programs for Measuring Glaucoma Progression.

PubMed

Moreno-Montañés, Javier; Antón, Vanesa; Antón, Alfonso; Larrosa, José M; Martinez-de-la-Casa, José María; Rebolleda, Gema; Ussa, Fernando; García-Granero, Marta

2017-04-01

It is important to evaluate intraobserver and interobserver agreement using visual field (VF) testing and optical coherence tomography (OCT) software in order to understand whether the use of this software is sufficient to detect glaucoma progression and to make decisions regarding its treatment. To evaluate agreement in VF and OCT software among 5 glaucoma specialists. The printout pages from VF progression software and OCT progression software from 100 patients were randomized, and the 5 glaucoma specialists subjectively and independently evaluated them for glaucoma. Each image was classified as having no progression, questionable progression, or progression. The principal investigator classified the patients previously as without variability (normal) or with high variability among tests (difficult). Using both software, the specialists also evaluated whether the glaucoma damage had progressed and if treatment change was needed. One month later, the same observers reevaluated the patients in a different order to determine intraobserver reproducibility. Intraobserver and interobserver agreement was estimated using κ statistics and Gwet second-order agreement coefficient. The agreement was compared with other factors. Of the 100 observed patients, half were male and all were white; the mean (SD) age was 69.7 (14.1) years. Intraobserver agreement was substantial to almost perfect for VF software (overall κ [95% CI], 0.59 [0.46-0.72] to 0.87 [0.79-0.96]) and similar for OCT software (overall κ [95% CI], 0.59 [0.46-0.71] to 0.85 [0.76-0.94]). Interobserver agreement among the 5 glaucoma specialists with the VF progression software was moderate (κ, 0.48; 95% CI, 0.41-0.55) and similar to OCT progression software (κ, 0.52; 95% CI, 0.44-0.59). Interobserver agreement was substantial in images classified as having no progression but only fair in those classified as having questionable glaucoma progression or glaucoma progression. Interobserver agreement was fair regarding questions about glaucoma progression (κ, 0.39; 95% CI, 0.32-0.48) and consideration about treatment changes (κ, 0.39; 95% CI, 0.32-0.48). The factors associated with agreement were the glaucoma stage and case difficulty. There was substantial intraobserver agreement but moderate interobserver agreement among glaucoma specialists using 2 glaucoma progression software packages. These data suggest that these glaucoma progression software packages are insufficient to obtain high interobserver agreement in both devices except in patients with no progression. The low agreement regarding progression or treatment changes suggests that both software programs used in isolation are insufficient for decision making.

Participation in multilateral effort to develop high performance integrated CPC evacuated collectors

NASA Astrophysics Data System (ADS)

Winston, R.; Ogallagher, J. J.

1992-05-01

The University of Chicago Solar Energy Group has had a continuing program and commitment to develop an advanced evacuated solar collector integrating nonimaging concentration into its design. During the period from 1985-1987, some of our efforts were directed toward designing and prototyping a manufacturable version of an Integrated Compound Parabolic Concentrator (ICPC) evacuated collector tube as part of an international cooperative effort involving six organizations in four different countries. This 'multilateral' project made considerable progress towards a commercially practical collector. One of two basic designs considered employed a heat pipe and an internal metal reflector CPC. We fabricated and tested two large diameter (125 mm) borosilicate glass collector tubes to explore this concept. The other design also used a large diameter (125 mm) glass tube but with a specially configured internal shaped mirror CPC coupled to a U-tube absorber. Performance projections in a variety of systems applications using the computer design tools developed by the International Energy Agency (IEA) task on evacuated collectors were used to optimize the optical and thermal design. The long-term goal of this work continues to be the development of a high efficiency, low cost solar collector to supply solar thermal energy at temperatures up to 250 C. Some experience and perspectives based on our work are presented and reviewed. Despite substantial progress, the stability of research support and the market for commercial solar thermal collectors were such that the project could not be continued. A cooperative path involving university, government, and industrial collaboration remains the most attractive near term option for developing a commercial ICPC.

Rosuvastatin Slows Progression of Subclinical Atherosclerosis in Patients with Treated HIV Infection

PubMed Central

Longenecker, Chris T.; Sattar, Abdus; Gilkeson, Robert; Mccomsey, Grace A.

2016-01-01

Objective To determine the effect of statins on the progression of subclinical atherosclerosis in a population of HIV-infected adults on antiretroviral therapy. Design Double-blind, randomized clinical trial Methods SATURN-HIV was a 96-week double-blind, randomized clinical trial of 10 mg daily rosuvastatin (n=72) versus placebo (n=75) in a population of HIV-infected subjects on stable antiretroviral therapy with LDL-cholesterol ≤130mg/dL (≤3.36mmol/L) and evidence of heightened T-cell activation (CD8+CD38+HLA-DR+ ≥19%) or increased inflammation (high sensitivity C-reactive protein ≥2mg/L (≥19mmol/L)). Change in common carotid artery IMT (CCA-IMT) was the primary outcome. Secondary outcomes were changes in LDL and coronary artery calcium (CAC). Results Median (Q1, Q3) age was 46 (40, 53) years; 78% were male and 68% African American; 49% were on a protease inhibitor. Mean (95% CI) change in LDL was −21 (−27 to −15) mg/dL [−0.54 (−0.70 to −0.39) mmol/L] in the rosuvastatin arm. In a multivariable linear mixed-effects model, assignment to statin was associated with 0.019mm (95% CI: 0.002–0.037mm) less progression of CCA-IMT over 96 weeks. We did not find substantial effect modification by level of inflammation or immune activation biomarkers, except for a borderline statistically significant interaction for soluble vascular cell adhesion molecule (p=0.065). There was no difference in CAC change (p=0.61). Conclusions Rosuvastatin effectively lowers LDL and appears to substantially slow progression of CCA-IMT in patients with treated HIV infection. Future study is needed to determine whether subjects with higher levels of inflammation or immune activation derive greater cardiovascular benefit from statin therapy. PMID:27203715

LOD BIM Element specification for Railway Turnout Systems Risk Mitigation using the Information Delivery Manual

NASA Astrophysics Data System (ADS)

Gigante-Barrera, Ángel; Dindar, Serdar; Kaewunruen, Sakdirat; Ruikar, Darshan

2017-10-01

Railway turnouts are complex systems designed using complex geometries and grades which makes them difficult to be managed in terms of risk prevention. This feature poses a substantial peril to rail users as it is considered a cause of derailment. In addition, derailment deals to financial losses due to operational downtimes and monetary compensations in case of death or injure. These are fundamental drivers to consider mitigating risks arising from poor risk management during design. Prevention through design (PtD) is a process that introduces tacit knowledge from industry professionals during the design process. There is evidence that Building Information Modelling (BIM) can help to mitigate risk since the inception of the project. BIM is considered an Information System (IS) were tacit knowledge can be stored and retrieved from a digital database making easy to take promptly decisions as information is ready to be analysed. BIM at the model element level entails working with 3D elements and embedded data, therefore adding a layer of complexity to the management of information along the different stages of the project and across different disciplines. In order to overcome this problem, the industry has created a framework for model progression specification named Level of Development (LOD). The paper presents an IDM based framework for design risk mitigation through code validation using the LOD. This effort resulted on risk datasets which describe graphically and non-graphically a rail turnout as the model progresses. Thus, permitting its inclusion within risk information systems. The assignment of an LOD construct to a set of data, requires specialised management and process related expertise. Furthermore, the selection of a set of LOD constructs requires a purpose based analysis. Therefore, a framework for LOD constructs implementation within the IDM for code checking is required for the industry to progress in this particular field.

Advanced and tendencies in the development of display technologies

NASA Astrophysics Data System (ADS)

Kompanets, I. N.

2006-06-01

Advances and key display applications are discussed. Computer, compact mobile, TV and collective large screen displays are mentioned. Flat panel displays step on CRT devices to leave them behind in 2007. Materials, active matricies and applications of bright radiative field emission and organic LED displays are developing successively and pressing other technologies to be used in photo-cameras, cellular phones, auto-cars and avionics. Progress in flexible screens can substantially extend the display design and application soon. 3D display systems are under intensive development, and laser is an important unit in some vaiants of holographic and volumetric 3D displays. Value forecast of different display markets is presented.

Turbomachinery Laboratory Texas A and M University research progress on annular gas seals

NASA Technical Reports Server (NTRS)

Childs, Dara W.

1994-01-01

Three helically-grooved seals were tested and the results were compared to the MTI code SPIRALG. A smooth annular seal was tested at six eccentricity ratios from 0 to 0.5. The following are concluded in this viewgraph presentation: (1) Helical-grooved seals provide a substantial reduction in cross-coupled stiffness coefficients. Negative k(sub xy) values are obtained for no-swirl or low-swirl cases. (2) SPIRALG is completely unsuitable for the type of seal tested, namely, turbulent flow, wide grooves and lands, etc. (3) A good analysis code is needed to guide the design of helically-grooved annular seals including groove and smooth sections.

First Year of WFIRST/AFTA Coronagraph Technology Development: Testbed Progress Update

NASA Astrophysics Data System (ADS)

Poberezhskiy, Ilya; Poberezhskiy, Ilya; Zhao, Feng; An, Xin; Balasubramanian, Kunjithapatham; Belikov, Rus; Cady, Eric; Diaz, Rosemary; Gordon, Brian; Guyon, Olivier; Kasdin, N. Jeremy; Kern, Brian; Kuhnert, Andreas; Moody, Dwight; Muller, Richard; Nemati, Bijan; Patterson, Keith; Riggs, A. J.; Ryan, Daniel; Seo, Byoung-Joon; Sidick, Erkin; Shi, Fang; Tang, Hong; Trauger, John; Wallace, Kent; Wang, Xu; Wilson, Daniel; White, Victor; Yee, Karl; Zhou, Hanying; Zimmerman, Neil

2015-01-01

NASA's WFIRST/AFTA mission study includes the first high-contrast stellar coronagraph in space. This coronagraph will be capable of imaging and spectrally characterizing giant exoplanets similar to Neptune and Jupiter and possibly super-Earths, as well as circumstellar disks. After a transparent and rigorous downselect process, NASA chose in December of 2013 a primary design called an Occulting Mask Coronagraph (OMC) that combines two technical approaches, Shaped Pupil and Hybrid Lyot, in one instrument. The Phase-Induced Amplitude Apodization Complex Mask Coronagraph was selected as the backup design.The OMC coronagraph technologies were assessed to have the highest likelihood of passing the WFIRST/AFTA flight readiness gates and the ability to produce compelling science by working with the existing 2.4-meter telescope 'as is,' including its central obscuration, expected thermal drift, and the observatory pointing jitter. NASA set us the objective of maturing the WFIRST/AFTA coronagraph to Technology Readiness Level (TRL) 5 by October 1, 2016. A set of technical milestones was agreed upon to track the progress toward achieving TRL 5.Substantial advances in WFIRST/AFTA coronagraph technology have been made during 2014, and the OMC progress is currently running ahead of the schedule laid out by the milestones. Our poster will present some of these key recent results to the community, including:(1) Fabrication and characterization of WFIRST/AFTA coronagraph pupil plane and focal plane masks designed to work with the existing 2.4 telescope.(2) Experimental results demonstrating high contrast achieved on a coronagraph testbed in narrowband and broadband light - first such results obtained with an obscured pupil.(3) Progress in the development of the low-order wavefront sensing and control subsystem that will use rejected starlight to sense and correct both high frequency pointing jitter and slow varying low order aberrations. This subsystem will be integrated with the OMC coronagraph in mid-2015 for the next phase of starlight suppression experiments with dynamic input wavefront.

A Programming Environment Evaluation Methodology for Object-Oriented Systems. Ph.D Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1987-01-01

The object-oriented design strategy as both a problem decomposition and system development paradigm has made impressive inroads into the various areas of the computing sciences. Substantial development productivity improvements have been demonstrated in areas ranging from artificial intelligence to user interface design. However, there has been very little progress in the formal characterization of these productivity improvements and in the identification of the underlying cognitive mechanisms. The development and validation of models and metrics of this sort require large amounts of systematically-gathered structural and productivity data. There has, however, been a notable lack of systematically-gathered information on these development environments. A large part of this problem is attributable to the lack of a systematic programming environment evaluation methodology that is appropriate to the evaluation of object-oriented systems.

3 CFR - Improving Energy Security, American Competitiveness and Job Creation, and Environmental...

Code of Federal Regulations, 2011 CFR

2011-01-01

... source of fossil fuel consumption and greenhouse gas pollution. I therefore request that the... annual progress in reducing transportation sector emissions and fossil fuel consumption consistent with... substantial annual progress in reducing transportation sector greenhouse gas emissions and fossil fuel...

24 CFR 1006.430 - Corrective and remedial action.

Code of Federal Regulations, 2011 CFR

2011-04-01

... plan; (3) Made substantial progress in carrying out its program and achieving its quantifiable goals as... to submit progress schedules for completing activities or complying with the requirements of the Act... appropriate technical assistance using existing grant funds or other available resources to overcome the...

Understanding and representing natural language meaning

NASA Astrophysics Data System (ADS)

Waltz, D. L.; Maran, L. R.; Dorfman, M. H.; Dinitz, R.; Farwell, D.

1982-12-01

During this contract period the authors have: (1) continued investigation of events and actions by means of representation schemes called 'event shape diagrams'; (2) written a parsing program which selects appropriate word and sentence meanings by a parallel process know as activation and inhibition; (3) begun investigation of the point of a story or event by modeling the motivations and emotional behaviors of story characters; (4) started work on combining and translating two machine-readable dictionaries into a lexicon and knowledge base which will form an integral part of our natural language understanding programs; (5) made substantial progress toward a general model for the representation of cognitive relations by comparing English scene and event descriptions with similar descriptions in other languages; (6) constructed a general model for the representation of tense and aspect of verbs; (7) made progress toward the design of an integrated robotics system which accepts English requests, and uses visual and tactile inputs in making decisions and learning new tasks.

Electrostatic separation for recycling waste printed circuit board: a study on external factor and a robust design for optimization.

PubMed

Hou, Shibing; Wu, Jiang; Qin, Yufei; Xu, Zhenming

2010-07-01

Electrostatic separation is an effective and environmentally friendly method for recycling waste printed circuit board (PCB) by several kinds of electrostatic separators. However, some notable problems have been detected in its applications and cannot be efficiently resolved by optimizing the separation process. Instead of the separator itself, these problems are mainly caused by some external factors such as the nonconductive powder (NP) and the superficial moisture of feeding granule mixture. These problems finally lead to an inefficient separation. In the present research, the impacts of these external factors were investigated and a robust design was built to optimize the process and to weaken the adverse impact. A most robust parameter setting (25 kv, 80 rpm) was concluded from the experimental design. In addition, some theoretical methods, including cyclone separation, were presented to eliminate these problems substantially. This will contribute to efficient electrostatic separation of waste PCB and make remarkable progress for industrial applications.

The Mixed Economic Progress of Immigrants.

ERIC Educational Resources Information Center

Schoeni, Robert F.; And Others

This report examines whether the economic well-being of male immigrants to the United States improves substantially over time, details differences in economic progress of immigrants from different countries of origin, and assesses the impact of educational attainment on immigrants' earnings. Analyses are based on Public Use Micro Samples of the…

Progress in Understanding Autism: 2007-2010

ERIC Educational Resources Information Center

Rutter, Michael L.

2011-01-01

Scientific progress is discussed in relation to clinical issues; genetic issues; environmental issues; and the state of play on psychological treatments. It is concluded that substantial gains in knowledge have been achieved during the last 3 years, and there have been some unexpected findings, but major puzzles remain. We should be hopeful of…

Transforming Performance Measurement for the 21st Century

ERIC Educational Resources Information Center

Hatry, Harry P.

2014-01-01

While substantial progress has been made in spreading performance measurement across the country and world, much of the information from performance measurement systems has been shallow. Modern technology and the considerable demand for information on progress in achieving the outcomes of public programs and policies are creating major…

THE DISADVANTAGED CHILDREN AND YOUTH OF AMERICA.

ERIC Educational Resources Information Center

OETTINGER, KATHERINE B.

PROGRESS IS BEING MADE TOWARD ERASING THE DISADVANTAGES OF THE MENTALLY RETARDED. MUCH PROGRESS HAS BEEN MADE IN RECOGNIZING THE HEALTH NEEDS OF THE RETARDED CHILD THROUGH SUBSTANTIAL LEGISLATION SPONSORED BY MANY BRANCHES OF GOVERNMENT, ACTION PROGRAMS STEMMING FROM BOTH PUBLIC AND VOLUNTARY SOURCES, AND A MOUNTING RESEARCH EFFORT. IN AN EFFORT…

Evaluating Test Validity: Reprise and Progress

ERIC Educational Resources Information Center

Shepard, Lorrie A.

2016-01-01

The AERA, APA, NCME Standards define validity as "the degree to which evidence and theory support the interpretations of test scores for proposed uses of tests". A century of disagreement about validity does not mean that there has not been substantial progress. This consensus definition brings together interpretations and use so that it…

Summary of NR Program Prometheus Efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

J Ashcroft; C Eshelman

2006-02-08

The Naval Reactors Program led work on the development of a reactor plant system for the Prometheus space reactor program. The work centered on a 200 kWe electric reactor plant with a 15-20 year mission applicable to nuclear electric propulsion (NEP). After a review of all reactor and energy conversion alternatives, a direct gas Brayton reactor plant was selected for further development. The work performed subsequent to this selection included preliminary nuclear reactor and reactor plant design, development of instrumentation and control techniques, modeling reactor plant operational features, development and testing of core and plant material options, and development ofmore » an overall project plan. Prior to restructuring of the program, substantial progress had been made on defining reference plant operating conditions, defining reactor mechanical, thermal and nuclear performance, understanding the capabilities and uncertainties provided by material alternatives, and planning non-nuclear and nuclear system testing. The mission requirements for the envisioned NEP missions cannot be accommodated with existing reactor technologies. Therefore concurrent design, development and testing would be needed to deliver a functional reactor system. Fuel and material performance beyond the current state of the art is needed. There is very little national infrastructure available for fast reactor nuclear testing and associated materials development and testing. Surface mission requirements may be different enough to warrant different reactor design approaches and development of a generic multi-purpose reactor requires substantial sacrifice in performance capability for each mission.« less

Myeloma: update on supportive care strategies.

PubMed

San Miguel, Jesús F; García-Sanz, Ramón

2003-06-01

Despite substantial innovations in the treatment of multiple myeloma (MM), it remains an incurable disease. In addition, it is debatable whether the progress in survival is attributable simply to the therapy used to destroy the tumor clone or if it is also because of therapy designed to ameliorate disease complications. Supportive therapy has evolved greatly alongside general supportive measures used in hematologic malignancies (such as new antibiotics, antifungal agents, and growth factors) in addition to better indications in complementary treatments such as radiotherapy, dialysis, and surgery. However, in MM, several specific adjuvant therapies have also been introduced (eg, bisphosphonates and erythroid-stimulating factors), which have conferred a key role to supportive therapy in the general treatment of patients with MM.

A NEW THERMIONIC RF ELECTRON GUN FOR SYNCHROTRON LIGHT SOURCES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kutsaev, Sergey; Agustsson, R.; Hartzell, J

A thermionic RF gun is a compact and efficient source of electrons used in many practical applications. RadiaBeam Systems and the Advanced Photon Source at Argonne National Laboratory collaborate in developing of a reliable and robust thermionic RF gun for synchrotron light sources which would offer substantial improvements over existing thermionic RF guns and allow stable operation with up to 1A of beam peak current at a 100 Hz pulse repetition rate and a 1.5 μs RF pulse length. In this paper, we discuss the electromagnetic and engineering design of the cavity and report the progress towards high power testsmore » of the cathode assembly of the new gun.« less

Capturing the 'ome': the expanding molecular toolbox for RNA and DNA library construction.

PubMed

Boone, Morgane; De Koker, Andries; Callewaert, Nico

2018-04-06

All sequencing experiments and most functional genomics screens rely on the generation of libraries to comprehensively capture pools of targeted sequences. In the past decade especially, driven by the progress in the field of massively parallel sequencing, numerous studies have comprehensively assessed the impact of particular manipulations on library complexity and quality, and characterized the activities and specificities of several key enzymes used in library construction. Fortunately, careful protocol design and reagent choice can substantially mitigate many of these biases, and enable reliable representation of sequences in libraries. This review aims to guide the reader through the vast expanse of literature on the subject to promote informed library generation, independent of the application.

Nanomaterial-Based Plasmon-Enhanced Infrared Spectroscopy.

PubMed

Yang, Xiaoxia; Sun, Zhipei; Low, Tony; Hu, Hai; Guo, Xiangdong; García de Abajo, F Javier; Avouris, Phaedon; Dai, Qing

2018-05-01

Surface-enhanced infrared absorption (SEIRA) has attracted increasing attention due to the potential of infrared spectroscopy in applications such as molecular trace sensing of solids, polymers, and proteins, specifically fueled by recent substantial developments in infrared plasmonic materials and engineered nanostructures. Here, the significant progress achieved in the past decades is reviewed, along with the current state of the art of SEIRA. In particular, the plasmonic properties of a variety of nanomaterials are discussed (e.g., metals, semiconductors, and graphene) along with their use in the design of efficient SEIRA configurations. To conclude, perspectives on potential applications, including single-molecule detection and in vivo bioassays, are presented. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evolution of endovascular stroke therapies and devices.

PubMed

Wallace, Adam N; Kansagra, Akash P; McEachern, James; Moran, Christopher J; Cross, Dewitte T; Derdeyn, Colin P

2016-01-01

Acute ischemic stroke is caused by occlusion of a cerebral artery, resulting in loss of brain tissue and neurologic deficits. However, a portion of the ischemic brain can be salvaged if blood flow is restored within an appropriate time frame. The past year has seen the publication of five positive randomized controlled trials demonstrating substantial benefit of mechanical thrombectomy in select patients with large vessel cerebrovascular occlusion. This progress is related to several factors, but most importantly, dramatic improvements in speed and rates of recanalization with the latest generation devices. In this article, we review the evolution of endovascular acute ischemic stroke therapies and key design features of the most widely used devices.

A simple two-stage design for quantitative responses with application to a study in diabetic neuropathic pain.

PubMed

Whitehead, John; Valdés-Márquez, Elsa; Lissmats, Agneta

2009-01-01

Two-stage designs offer substantial advantages for early phase II studies. The interim analysis following the first stage allows the study to be stopped for futility, or more positively, it might lead to early progression to the trials needed for late phase II and phase III. If the study is to continue to its second stage, then there is an opportunity for a revision of the total sample size. Two-stage designs have been implemented widely in oncology studies in which there is a single treatment arm and patient responses are binary. In this paper the case of two-arm comparative studies in which responses are quantitative is considered. This setting is common in therapeutic areas other than oncology. It will be assumed that observations are normally distributed, but that there is some doubt concerning their standard deviation, motivating the need for sample size review. The work reported has been motivated by a study in diabetic neuropathic pain, and the development of the design for that trial is described in detail. Copyright 2008 John Wiley & Sons, Ltd.

Design and Performance of the Antenna-Coupled Lumped-Element Kinetic Inductance Detector

NASA Astrophysics Data System (ADS)

Barry, P. S.; Doyle, S.; Hornsby, A. L.; Kofman, A.; Mayer, E.; Nadolski, A.; Tang, Q. Y.; Vieira, J.; Shirokoff, E.

2018-05-01

Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to current instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large-format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this paper, we report on the design of a variant of the traditional KID design: the antenna-coupled lumped-element KID. A polarisation-sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID, where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.

Stable Radical Materials for Energy Applications.

PubMed

Wilcox, Daniel A; Agarkar, Varad; Mukherjee, Sanjoy; Boudouris, Bryan W

2018-06-07

Although less studied than their closed-shell counterparts, materials containing stable open-shell chemistries have played a key role in many energy storage and energy conversion devices. In particular, the oxidation-reduction (redox) properties of these stable radicals have made them a substantial contributor to the progress of organic batteries. Moreover, the use of radical-based materials in photovoltaic devices and thermoelectric systems has allowed for these emerging molecules to have impacts in the energy conversion realm. Additionally, the unique doublet states of radical-based materials provide access to otherwise inaccessible spin states in optoelectronic devices, offering many new opportunities for efficient usage of energy in light-emitting devices. Here, we review the current state of the art regarding the molecular design, synthesis, and application of stable radicals in these energy-related applications. Finally, we point to fundamental and applied arenas of future promise for these designer open-shell molecules, which have only just begun to be evaluated in full.

An Overview of Hardware for Protein Crystallization in a Magnetic Field.

PubMed

Yan, Er-Kai; Zhang, Chen-Yan; He, Jin; Yin, Da-Chuan

2016-11-16

Protein crystallization under a magnetic field is an interesting research topic because a magnetic field may provide a special environment to acquire improved quality protein crystals. Because high-quality protein crystals are very useful in high-resolution structure determination using diffraction techniques (X-ray, neutron, and electron diffraction), research using magnetic fields in protein crystallization has attracted substantial interest; some studies have been performed in the past two decades. In this research field, the hardware is especially essential for successful studies because the environment is special and the design and utilization of the research apparatus in such an environment requires special considerations related to the magnetic field. This paper reviews the hardware for protein crystallization (including the magnet systems and the apparatus designed for use in a magnetic field) and progress in this area. Future prospects in this field will also be discussed.

Antibody mimetics: promising complementary agents to animal-sourced antibodies.

PubMed

Baloch, Abdul Rasheed; Baloch, Abdul Wahid; Sutton, Brian J; Zhang, Xiaoying

2016-01-01

Despite their wide use as therapeutic, diagnostic and detection agents, the limitations of polyclonal and monoclonal antibodies have inspired scientists to design the next generation biomedical agents, so-called antibody mimetics that offer many advantages over conventional antibodies. Antibody mimetics can be constructed by protein-directed evolution or fusion of complementarity-determining regions through intervening framework regions. Substantial progress in exploiting human, butterfly (Pieris brassicae) and bacterial systems to design and select mimetics using display technologies has been made in the past 10 years, and one of these mimetics [Kalbitor® (Dyax)] has made its way to market. Many challenges lie ahead to develop mimetics for various biomedical applications, especially those for which conventional antibodies are ineffective, and this review describes the current characteristics, construction and applications of antibody mimetics compared to animal-sourced antibodies. The possible limitations of mimetics and future perspectives are also discussed.

Carbon and Carbon Hybrid Materials as Anodes for Sodium-Ion Batteries.

PubMed

Zhong, Xiongwu; Wu, Ying; Zeng, Sifan; Yu, Yan

2018-02-12

Sodium-ion batteries (SIBs) have attracted much attention for application in large-scale grid energy storage owing to the abundance and low cost of sodium sources. However, low energy density and poor cycling life hinder practical application of SIBs. Recently, substantial efforts have been made to develop electrode materials to push forward large-scale practical applications. Carbon materials can be directly used as anode materials, and they show excellent sodium storage performance. Additionally, designing and constructing carbon hybrid materials is an effective strategy to obtain high-performance anodes for SIBs. In this review, we summarize recent research progress on carbon and carbon hybrid materials as anodes for SIBs. Nanostructural design to enhance the sodium storage performance of anode materials is discussed, and we offer some insight into the potential directions of and future high-performance anode materials for SIBs. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Trash to treasure: production of biofuels and commodity chemicals via syngas fermenting microorganisms.

PubMed

Latif, Haythem; Zeidan, Ahmad A; Nielsen, Alex T; Zengler, Karsten

2014-06-01

Fermentation of syngas is a means through which unutilized organic waste streams can be converted biologically into biofuels and commodity chemicals. Despite recent advances, several issues remain which limit implementation of industrial-scale syngas fermentation processes. At the cellular level, the energy conservation mechanism of syngas fermenting microorganisms has not yet been entirely elucidated. Furthermore, there was a lack of genetic tools to study and ultimately enhance their metabolic capabilities. Recently, substantial progress has been made in understanding the intricate energy conservation mechanisms of these microorganisms. Given the complex relationship between energy conservation and metabolism, strain design greatly benefits from systems-level approaches. Numerous genetic manipulation tools have also been developed, paving the way for the use of metabolic engineering and systems biology approaches. Rational strain designs can now be deployed resulting in desirable phenotypic traits for large-scale production. Copyright © 2013 Elsevier Ltd. All rights reserved.

An Overview of Hardware for Protein Crystallization in a Magnetic Field

PubMed Central

Yan, Er-Kai; Zhang, Chen-Yan; He, Jin; Yin, Da-Chuan

2016-01-01

Protein crystallization under a magnetic field is an interesting research topic because a magnetic field may provide a special environment to acquire improved quality protein crystals. Because high-quality protein crystals are very useful in high-resolution structure determination using diffraction techniques (X-ray, neutron, and electron diffraction), research using magnetic fields in protein crystallization has attracted substantial interest; some studies have been performed in the past two decades. In this research field, the hardware is especially essential for successful studies because the environment is special and the design and utilization of the research apparatus in such an environment requires special considerations related to the magnetic field. This paper reviews the hardware for protein crystallization (including the magnet systems and the apparatus designed for use in a magnetic field) and progress in this area. Future prospects in this field will also be discussed. PMID:27854318

Pharmacoinformatic approaches to understand complexation of dendrimeric nanoparticles with drugs

NASA Astrophysics Data System (ADS)

Jain, Vaibhav; Bharatam, Prasad V.

2014-02-01

Nanoparticle based drug delivery systems are gaining popularity due to their wide spectrum advantages over traditional drug delivery systems; among them, dendrimeric nano-vectors are the most widely explored carriers for pharmaceutical and biomedical applications. The precise mechanism of encapsulation of drug molecules inside the dendritic matrix, delivery of drugs into specific cells, interactions of nano-formulation with biological targets and proteins, etc. present a substantial challenge to the scientific understanding of the subject. Computational methods complement experimental techniques in the design and optimization of drug delivery systems, thus minimizing the investment in drug design and development. Significant progress in computer simulations could facilitate an understanding of the precise mechanism of encapsulation of bioactive molecules and their delivery. This review summarizes the pharmacoinformatic studies spanning from quantum chemical calculations to coarse-grained simulations, aimed at providing better insight into dendrimer-drug interactions and the physicochemical parameters influencing the binding and release mechanism of drugs.

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

49 CFR 213.113 - Defective rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... smooth, bright, or dark, round or oval surface substantially at a right angle to the length of the rail... in the head of the rail as a smooth, bright, or dark surface progressing until substantially at a... head, and extending into or through it. A crack or rust streak may show under the head close to the web...

A Letter to White Women Teachers: An Urgent Plea for Change

ERIC Educational Resources Information Center

Baker, Laura

2017-01-01

The new Progressive Education Network mission says that Progressive Education "promotes diversity, equity, and justice." These goals cannot be met unless there are substantial changes in the way the majority of teachers in the United States, white women teachers, think and operate. This open letter to that audience from a white woman…

Finding the Right Mix: Teaching Methods as Predictors for Student Progress on Learning Objectives

ERIC Educational Resources Information Center

Glover, Jacob I.

2012-01-01

This study extends existing student ratings research by exploring how teaching methods, individually and collectively, influence a minimum standard of student achievement on learning objectives and how class size impacts this influence. Twenty teaching methods were used to predict substantial or exceptional progress on each of 12 learning…

Southern African Large Telescope (SALT) project: progress and status after 2 years

NASA Astrophysics Data System (ADS)

Meiring, Jacobus G.; Buckley, David A. H.; Lomberg, Michael C.; Stobie, Robert S.

2003-02-01

The Southern African Large Telescope (SALT) is a 10-m class optical/IR segmented mirror telescope based on the groundbreaking, low cost, Hobby-Eberly Telescope (HET) design. Approval to construct and operate SALT, which will be the largest single optical telescope in the Southern Hemisphere, was given by the South African Government in November 1999, after sufficient guarantees of matching funding from international partners were secured. Facility construction started in January 2001, and SALT is due to start operations by December 2004. SALT will enable a quantum leap in astronomical research capability in Southern Africa, and indeed the continent, where currently the largest telescope is a modest 1.9-m, dating to the 1940s. A substantial amount of design work for SALT has been completed, sourced from multiple suppliers, with ~60% South African content. South African industry is well equipped to handle the construction of most of the telescope, the exceptions being the glass ceramic mirror blanks (from LZOS in Russia), the polishing and ion figuring of these (Eastman Kodak in the USA), and fabrication of the four-element spherical aberration corrector (SAGEM in France). This paper will present (1) the scientific requirements, (2) the specified performance of SALT, (3) the basic design, with emphasis on the innovative modifications to the HET design that enable significantly improved performance, (4) the progress and status of the project, currently in its construction phase, (5) the first generation instrument suite, (6) the management and organisation of the project and (7) the international partnership in SALT.

Using health technology assessment to identify gaps in evidence and inform study design for comparative effectiveness research.

PubMed

Tunis, Sean R; Turkelson, Charles

2012-12-01

Health technology assessment (HTA) is primarily used as a tool to ensure that clinical and policy decisions are made with the benefit of a systematic analysis of all completed research. This article describes the progress and potential for HTA reports to improve the quality and relevance of future research and to better serve the information needs of patients, clinicians, payers, and other decision makers. We conducted a review of the current published literature and working papers describing past, ongoing, and future initiatives that rely on HTA reports to identify gaps in evidence and improve the design of future research. Although still in a developmental stage, significant progress is under way to improve methods for using HTA reports for the systematic identification of research gaps, prioritization of future research, and improvement of study designs. Several well-defined frameworks have been developed to assist those who produce HTA to become more effective in these additional domains of work. A recurring element of this work is the importance of meaningfully involving stakeholders in the process of defining future research needs and designing studies to address them. Patients, clinicians, and payers are important audiences for completed research and are now recognized as serving an important role in determining what future research is needed. There are substantial opportunities to improve the quality, relevance, and efficiency of clinical research. Recent efforts are beginning to demonstrate the potential to build on the work invested in developing HTA reports to provide a roadmap toward these objectives.

GMTNIRS: progress toward the Giant Magellan Telescope near-infrared spectrograph

NASA Astrophysics Data System (ADS)

Jaffe, Daniel T.; Barnes, Stuart; Brooks, Cynthia; Lee, Hanshin; Mace, Gregory; Pak, Soojong; Park, Byeong-Gon; Park, Chan

2016-08-01

GMTNIRS is a first-generation instrument for the Giant Magellan Telescope. It is a high-resolution spectrograph that will cover the 1.15-5.3 μm range in a single exposure with R=60,000 in the J, H, and K bands and R=85,000 in the L and M bands. It resides on the GMT's rotating instrument platform and employs the facility adaptive optics system. The GMTNIRS design is evolving in response to emerging science problems, particularly in the area of exoplanet atmospheres. Our design revisions also derive lessons from GMTNIRS' highly successful forerunner instrument, IGRINS. Technical changes also drive evolution of the design. It has proven impractical to manufacture 200mm long immersion gratings at the necessary precision. The success of primary mirror phasing efforts has removed the need for a very wide entrance slit that we would have needed to accommodate the Airy pattern of individual segments at the shortest operating wavelengths. The high efficiency of our double-side coated JWST grisms introduces the possibility of transmissive cross-dispersers at L and M. These changes move us toward a design with almost the same R as presented in our previous work but with a much more compact physical envelope. We will report on the optimization of the instrument design with these technical changes in mind. We are also producing the critical Si immersion gratings. The grating production is well under way and includes manufacture of H and K gratings and process development for the precision needed in the J band and for the manufacture of larger gratings for the L and M band. The development of GMTNIRS is on track with the results from IGRINS and the progress in the lab giving us substantial assurance that the new instrument can meet its performance goals.

Progressing batch hydrolysis process

DOEpatents

Wright, J.D.

1985-01-10

A progressive batch hydrolysis process is disclosed for producing sugar from a lignocellulosic feedstock. It comprises passing a stream of dilute acid serially through a plurality of percolation hydrolysis reactors charged with feed stock, at a flow rate, temperature and pressure sufficient to substantially convert all the cellulose component of the feed stock to glucose. The cooled dilute acid stream containing glucose, after exiting the last percolation hydrolysis reactor, serially fed through a plurality of pre-hydrolysis percolation reactors, charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the hemicellulose component of said feedstock to glucose. The dilute acid stream containing glucose is cooled after it exits the last prehydrolysis reactor.

Progressing batch hydrolysis process

DOEpatents

Wright, John D.

1986-01-01

A progressive batch hydrolysis process for producing sugar from a lignocellulosic feedstock, comprising passing a stream of dilute acid serially through a plurality of percolation hydrolysis reactors charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the cellulose component of the feedstock to glucose; cooling said dilute acid stream containing glucose, after exiting the last percolation hydrolysis reactor, then feeding said dilute acid stream serially through a plurality of prehydrolysis percolation reactors, charged with said feedstock, at a flow rate, temperature and pressure sufficient to substantially convert all the hemicellulose component of said feedstock to glucose; and cooling the dilute acid stream containing glucose after it exits the last prehydrolysis reactor.

Regulation of cell division cycle progression by bcl-2 expression: a potential mechanism for inhibition of programmed cell death

PubMed Central

1996-01-01

Expression of the bcl-2 gene has been shown to effectively confer resistance to programmed cell death under a variety of circumstances. However, despite a wealth of literature describing this phenomenon, very little is known about the mechanism of resistance. In the experiments described here, we show that bcl-2 gene expression can result in an inhibition of cell division cycle progression. These findings are based upon the analysis of cell cycle distribution, cell cycle kinetics, and relative phosphorylation of the retinoblastoma tumor suppressor protein, using primary tissues in vivo, ex vivo, and in vitro, as well as continuous cell lines. The effects of bcl-2 expression on cell cycle progression appear to be focused at the G1 to S phase transition, which is a critical control point in the decision between continued cell cycle progression or the induction programmed cell death. In all systems tested, bcl-2 expression resulted in a substantial 30-60% increase in the length of G1 phase; such an increase is very substantial in the context of other regulators of cell cycle progression. Based upon our findings, and the related findings of others, we propose a mechanism by which bcl-2 expression might exert its well known inhibition of programmed cell death by regulating the kinetics of cell cycle progression at a critical control point. PMID:8642331

Compartments, Customers, or Convergence?: Evolving Challenges to IT Progress

ERIC Educational Resources Information Center

Jackson, Gregory A.

2007-01-01

For most of the past decade, IT leaders in higher education felt on top of things. Challenges were usually comprehensible and addressable, doing reasonable things yielded reasonable results, and for the most part, IT was a substantial contributor to institutional progress. But these days, IT leaders rarely feel on top of things. Instead, some days…

Documentation of medication changes in inpatient clinical notes: an audit to support quality improvement.

PubMed

Peusschers, Elsie; Twine, Jaryth; Wheeler, Amanda; Moudgil, Vikas; Patterson, Sue

2015-04-01

To describe completeness and accuracy of recording medication changes in progress notes during psychiatric inpatient admissions. A retrospective audit of records of 54 randomly selected psychiatric admissions at a metropolitan tertiary hospital. Medication changes recorded on National Inpatient Medication Chart (NIMC) were compared to documentation in the clinical progress records and assessed for completeness against seven quality criteria. With between one and 32 medication changes per admission, a total of 519 changes were recorded in NIMCs. Just over half were documented in progress notes. Psychotropic and regular medications were more frequently charted than 'other' and 'if required' medications. Documentation was seldom comprehensive. Medication name was most frequently documented; desired therapeutic effect or potential adverse effects were rarely documented. Evidence of patient involvement in, and an explicit rationale for, a change were infrequently recorded. Revealing substantial gaps in communication about medication changes during psychiatric admission, this audit sheds light on a previously undescribed source of medication error, warranting attention. Further research is needed to examine barriers to best practice, to support design and implementation of quality improvement activities but in the interim, attention should be addressed to development and articulation of content and procedures for documentation. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Factor structure of the Hooper Visual Organization Test: a cross-cultural replication and extension.

PubMed

Merten, Thomas

2005-01-01

To investigate construct validity of the Hooper Visual Organization Test (VOT), a principal-axis analysis was performed on the neuropsychological test results of 200 German-speaking neurological patients who received a comprehensive battery, encompassing tests of visuospatial functions, memory, attention, executive functions, naming ability, and vocabulary. A four-factor solution was obtained with substantial loadings of the VOT only on the first factor, interpreted as a global dimension of non-verbal cognitive functions. This factor loaded significantly on numerous measures of visuospatial processing and attention (with particularly high loadings on WAIS-R Block Design, Trails A and B, and Raven's Standard Progressive Matrices). The remaining three factors were interpreted as memory, verbal abilities (vocabulary), and a separate factor of naming abilities.

Heart Repair and Regeneration: Recent Insights from Zebrafish Studies

PubMed Central

Lien, Ching-Ling; Harrison, Michael R.; Tuan, Tai-Lan; Starnes, Vaughn A

2012-01-01

Cardiovascular disease is the leading cause of death in United States and worldwide. Failure to properly repair or regenerate damaged cardiac tissues after myocardial infarction is a major cause of heart failure. In contrast to humans and other mammals, zebrafish hearts regenerate after substantial injury or tissue damage. Here, we review recent progress in studying zebrafish heart regeneration, addressing the molecular and cellular responses in the three tissue layers of the heart: myocardium, epicardium, and endocardium. We also compare different injury models utilized to study zebrafish heart regeneration, and discuss the differences in responses to injury between mammalian and zebrafish hearts. By learning how zebrafish hearts regenerate naturally, we can better design therapeutic strategies for repairing human hearts after myocardial infarction. PMID:22818295

Engineering clinically relevant volumes of vascularized bone

PubMed Central

Roux, Brianna M; Cheng, Ming-Huei; Brey, Eric M

2015-01-01

Vascularization remains one of the most important challenges that must be overcome for tissue engineering to be consistently implemented for reconstruction of large volume bone defects. An extensive vascular network is needed for transport of nutrients, waste and progenitor cells required for remodelling and repair. A variety of tissue engineering strategies have been investigated in an attempt to vascularize tissues, including those applying cells, soluble factor delivery strategies, novel design and optimization of bio-active materials, vascular assembly pre-implantation and surgical techniques. However, many of these strategies face substantial barriers that must be overcome prior to their ultimate translation into clinical application. In this review recent progress in engineering vascularized bone will be presented with an emphasis on clinical feasibility. PMID:25877690

Power efficient optical communications for space applications

NASA Technical Reports Server (NTRS)

Lesh, J. R.

1982-01-01

Optical communications technology promises substantial size, weight and power consumption savings for space to space high data rate communications over presently used microwave technology. These benefits are further increased by making the most efficient use of the available optical signal energy. This presentation will describe the progress to date on a project to design, build and demonstrate in the laboratory an optical communication system capable of conveying 2.5 bits of information per effective received photon. Such high power efficiencies will reduce the need for photon collection at the receiver and will greatly reduce the requirements for optical pointing accuracy, both at the transmitter as well as the receiver. A longer range program to demonstrate even higher photon efficiencies will also be described.

Scheduling Earth Observing Fleets Using Evolutionary Algorithms: Problem Description and Approach

NASA Technical Reports Server (NTRS)

Globus, Al; Crawford, James; Lohn, Jason; Morris, Robert; Clancy, Daniel (Technical Monitor)

2002-01-01

We describe work in progress concerning multi-instrument, multi-satellite scheduling. Most, although not all, Earth observing instruments currently in orbit are unique. In the relatively near future, however, we expect to see fleets of Earth observing spacecraft, many carrying nearly identical instruments. This presents a substantially new scheduling challenge. Inspired by successful commercial applications of evolutionary algorithms in scheduling domains, this paper presents work in progress regarding the use of evolutionary algorithms to solve a set of Earth observing related model problems. Both the model problems and the software are described. Since the larger problems will require substantial computation and evolutionary algorithms are embarrassingly parallel, we discuss our parallelization techniques using dedicated and cycle-scavenged workstations.

Progress in Application of the Neurosciences to an Understanding of Human Learning: The Challenge of Finding a Middle-Ground Neuroeducational Theory

ERIC Educational Resources Information Center

Anderson, O. Roger

2014-01-01

Modern neuroscientific research has substantially enhanced our understanding of the human brain. However, many challenges remain in developing a strong, brain-based theory of human learning, especially in complex environments such as educational settings. Some of the current issues and challenges in our progress toward developing comprehensive…

Progress and Challenges in Subseasonal Prediction

NASA Technical Reports Server (NTRS)

Schubert, Siegfried

2003-01-01

While substantial advances have occurred over the last few decades in both weather and seasonal prediction, progress in improving predictions on subseasonal time scales (approximately 2 weeks to 2 months) has been slow. In this talk I will highlight some of the recent progress that has been made to improve forecasts on subseasonal time scales and outline the challenges that we face both from an observational and modeling perspective. The talk will be based primarily on the results and conclusions of a recent NASA-sponsored workshop that focused on the subseasonal prediction problem. One of the key conclusions of that workshop was that there is compelling evidence for predictability at forecast lead times substantially longer than two weeks, and that much of that predictability is currently untapped. Tropical diabatic heating and soil wetness were singled out as particularly important processes affecting predictability on these time scales. Predictability was also linked to various low-frequency atmospheric phenomena such as the annular modes in high latitudes (including their connections to the stratosphere), the Pacific/North American pattern, and the Madden-Julian Oscillation. I will end the talk by summarizing the recommendations and plans that have been put forward for accelerating progress on the subseasonal prediction problem.

Technologies for Controlled, Local Delivery of siRNA

PubMed Central

Sarett, Samantha M.; Nelson, Christopher E.; Duvall, Craig L.

2015-01-01

The discovery of RNAi in the late 1990s unlocked a new realm of therapeutic possibilities by enabling potent and specific silencing of theoretically any desired genetic target. Better elucidation of the mechanism of action, the impact of chemical modifications that stabilize and reduce nonspecific effects of siRNA molecules, and the key design considerations for effective delivery systems has spurred progress toward developing clinically-successful siRNA therapies. A logical aim for initial siRNA translation is local therapies, as delivering siRNA directly to its site of action helps to ensure that a sufficient dose reaches the target tissue, lessens the potential for off-target side effects, and circumvents the substantial systemic delivery barriers. While topical siRNA delivery has progressed into numerous clinical trials, an enormous opportunity also exists to develop sustained-release, local delivery systems that enable both spatial and temporal control of gene silencing. This review focuses on material platforms that establish both localized and controlled gene silencing, with emphasis on the systems that show most promise for clinical translation. PMID:26476177

Flexible Wing Base Micro Aerial Vehicles: Vision-Guided Flight Stability and Autonomy for Micro Air Vehicles

NASA Technical Reports Server (NTRS)

Ettinger, Scott M.; Nechyba, Michael C.; Ifju, Peter G.; Wazak, Martin

2002-01-01

Substantial progress has been made recently towards design building and test-flying remotely piloted Micro Air Vehicle's (MAVs). We seek to complement this progress in overcoming the aerodynamic obstacles to.flight at very small scales with a vision stability and autonomy system. The developed system based on a robust horizon detection algorithm which we discuss in greater detail in a companion paper. In this paper, we first motivate the use of computer vision for MAV autonomy arguing that given current sensor technology, vision may he the only practical approach to the problem. We then briefly review our statistical vision-based horizon detection algorithm, which has been demonstrated at 30Hz with over 99.9% correct horizon identification. Next we develop robust schemes for the detection of extreme MAV attitudes, where no horizon is visible, and for the detection of horizon estimation errors, due to external factors such as video transmission noise. Finally, we discuss our feed-back controller for self-stabilized flight, and report results on vision autonomous flights of duration exceeding ten minutes.

Design of a cosmetic glove stiffness compensation mechanism for toddler-sized hand prostheses

PubMed Central

Plettenburg, Dick H.

2017-01-01

The addition of a cosmetic glove to an upper limb prosthesis has a distinct effect on the cosmetic value, but its viscoelastic behaviour adds a substantial amount of stiffness and hysteresis to the system. As a result, the overall usability of the prosthesis is degraded. A novel negative stiffness element is designed to compensate for the cosmetic glove's stiffness. A combination of linear helical springs and the concept of rolling link mechanisms has resulted in a Rolling Stiffness Compensation Mechanism (RSCM). Results show that the RSCM is capable of exerting a progressive negative stiffness characteristic and can be built small enough to fit inside a 33 mm diameter wrist. Using the RSCM, an otherwise voluntary opening toddler-sized prosthesis is converted into a voluntary closing device, reducing maximum operation forces down to 40 N with a combined efficiency of 52%. Further adjustments to the design are possible to further improve the efficiency of the mechanism. Moreover, changes in geometric relations of the mechanism offers possibilities for a wide range of prostheses and other applications. PMID:28800635

Magnetic Nanoparticles: From Design and Synthesis to Real World Applications

PubMed Central

Kudr, Jiri; Heger, Zbynek; Cernak, Mirko; Adam, Vojtech; Zitka, Ondrej

2017-01-01

The increasing number of scientific publications focusing on magnetic materials indicates growing interest in the broader scientific community. Substantial progress was made in the synthesis of magnetic materials of desired size, morphology, chemical composition, and surface chemistry. Physical and chemical stability of magnetic materials is acquired by the coating. Moreover, surface layers of polymers, silica, biomolecules, etc. can be designed to obtain affinity to target molecules. The combination of the ability to respond to the external magnetic field and the rich possibilities of coatings makes magnetic materials universal tool for magnetic separations of small molecules, biomolecules and cells. In the biomedical field, magnetic particles and magnetic composites are utilized as the drug carriers, as contrast agents for magnetic resonance imaging (MRI), and in magnetic hyperthermia. However, the multifunctional magnetic particles enabling the diagnosis and therapy at the same time are emerging. The presented review article summarizes the findings regarding the design and synthesis of magnetic materials focused on biomedical applications. We highlight the utilization of magnetic materials in separation/preconcentration of various molecules and cells, and their use in diagnosis and therapy. PMID:28850089

The impact of the worldwide Millennium Development Goals campaign on maternal and under-five child mortality reduction: ‘Where did the worldwide campaign work most effectively?’

PubMed Central

Cha, Seungman

2017-01-01

ABSTRACT Background: As the Millennium Development Goals campaign (MDGs) came to a close, clear evidence was needed on the contribution of the worldwide MDG campaign. Objective: We seek to determine the degree of difference in the reduction rate between the pre-MDG and MDG campaign periods and its statistical significance by region. Design: Unlike the prevailing studies that measured progress in 1990–2010, this study explores by percentage how much MDG progress has been achieved during the MDG campaign period and quantifies the impact of the MDG campaign on the maternal and under-five child mortality reduction during the MDG era by comparing observed values with counterfactual values estimated on the basis of the historical trend. Results: The low accomplishment of sub-Saharan Africa toward the MDG target mainly resulted from the debilitated progress of mortality reduction during 1990–2000, which was not related to the worldwide MDG campaign. In contrast, the other regions had already achieved substantial progress before the Millennium Declaration was proclaimed. Sub-Saharan African countries have seen the most remarkable impact of the worldwide MDG campaign on maternal and child mortality reduction across all different measurements. In sub-Saharan Africa, the MDG campaign has advanced the progress of the declining maternal mortality ratio and under-five mortality rate, respectively, by 4.29 and 4.37 years. Conclusions: Sub-Saharan African countries were frequently labeled as ‘off-track’, ‘insufficient progress’, or ‘no progress’ even though the greatest progress was achieved here during the worldwide MDG campaign period and the impact of the worldwide MDG campaign was most pronounced in this region in all respects. It is time to learn from the success stories of the sub-Saharan African countries. Erroneous and biased measurement should be avoided for the sustainable development goals to progress. PMID:28168932

Fifteen years of sector-wide approach (SWAp) in Bangladesh health sector: an assessment of progress

PubMed Central

Ahsan, Karar Zunaid; Streatfield, Peter Kim; Ijdi, Rashida -E-; Escudero, Gabriela Maria; Khan, Abdul Waheed; Reza, M M

2016-01-01

The Ministry of Health and Family Welfare (MOHFW) of the Government of Bangladesh embarked on a sector-wide approach (SWAp) modality for the health, nutrition and population (HNP) sector in 1998. This programmatic shift initiated a different set of planning disciplines and practices along with institutional changes in the MOHFW. Over the years, the SWAp modality has evolved in Bangladesh as the MOHFW has learnt from its implementation and refined the program design. This article explores the progress made, both in terms of achievement of health outcomes and systems strengthening results, since the implementation of the SWAp for Bangladesh’s health sector. Secondary analyses of survey data from 1993 to 2011 as well as a literature review of published and grey literature on health SWAp in Bangladesh was conducted for this assessment. Results of the assessment indicate that the MOHFW made substantial progress in health outcomes and health systems strengthening. SWAps facilitated the alignment of funding and technical support around national priorities, and improved the government’s role in program design as well as in implementation and development partner coordination. Notable systemic improvements have taken place in the country systems with regards to monitoring and evaluation, procurement and service provision, which have improved functionality of health facilities to provide essential care. Implementation of the SWAp has, therefore, contributed to an accelerated improvement in key health outcomes in Bangladesh over the last 15 years. The health SWAp in Bangladesh offers an example of a successful adaptation of such an approach in a complex administrative structure. Based on the lessons learned from SWAp implementation in Bangladesh, the MOHFW needs to play a stronger stewardship and regulatory role to reap the full benefits of a SWAp in its subsequent programming. PMID:26582744

Primary progressive aphasia: a clinical approach.

PubMed

Marshall, Charles R; Hardy, Chris J D; Volkmer, Anna; Russell, Lucy L; Bond, Rebecca L; Fletcher, Phillip D; Clark, Camilla N; Mummery, Catherine J; Schott, Jonathan M; Rossor, Martin N; Fox, Nick C; Crutch, Sebastian J; Rohrer, Jonathan D; Warren, Jason D

2018-06-01

The primary progressive aphasias are a heterogeneous group of focal 'language-led' dementias that pose substantial challenges for diagnosis and management. Here we present a clinical approach to the progressive aphasias, based on our experience of these disorders and directed at non-specialists. We first outline a framework for assessing language, tailored to the common presentations of progressive aphasia. We then consider the defining features of the canonical progressive nonfluent, semantic and logopenic aphasic syndromes, including 'clinical pearls' that we have found diagnostically useful and neuroanatomical and other key associations of each syndrome. We review potential diagnostic pitfalls and problematic presentations not well captured by conventional classifications and propose a diagnostic 'roadmap'. After outlining principles of management, we conclude with a prospect for future progress in these diseases, emphasising generic information processing deficits and novel pathophysiological biomarkers.

Micronutrients, N-Acetyl Cysteine, Probiotics and Prebiotics, a Review of Effectiveness in Reducing HIV Progression

PubMed Central

Hummelen, Ruben; Hemsworth, Jaimie; Reid, Gregor

2010-01-01

Low serum concentrations of micronutrients, intestinal abnormalities, and an inflammatory state have been associated with HIV progression. These may be ameliorated by micronutrients, N-acetyl cysteine, probiotics, and prebiotics. This review aims to integrate the evidence from clinical trials of these interventions on the progression of HIV. Vitamin B, C, E, and folic acid have been shown to delay the progression of HIV. Supplementation with selenium, N-acetyl cysteine, probiotics, and prebiotics has considerable potential, but the evidence needs to be further substantiated. Vitamin A, iron, and zinc have been associated with adverse effects and caution is warranted for their use. PMID:22254046

Early Rockets

NASA Image and Video Library

2004-04-15

Dr. Robert H. Goddard loading a 1918 version of the Bazooka of World War II. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

The Unfulfilled Promise of Special Education: The Transition from Education to Work for Young Adults with Disabilities

ERIC Educational Resources Information Center

Rusch, Frank R.; Loomis, Frederick D.

2005-01-01

During the past quarter century, federal legislation has resulted in fundamental changes in the way youth with special needs are educated. Despite legal mandates and substantial funding support, only minimal progress has been made in the rate at which exceptional children progress through school to the world of work. During the past 30 years,…

Maternal and neonatal tetanus

PubMed Central

Thwaites, C Louise; Beeching, Nicholas J; Newton, Charles R

2017-01-01

Maternal and neonatal tetanus is still a substantial but preventable cause of mortality in many developing countries. Case fatality from these diseases remains high and treatment is limited by scarcity of resources and effective drug treatments. The Maternal and Neonatal Tetanus Elimination Initiative, launched by WHO and its partners, has made substantial progress in eliminating maternal and neonatal tetanus. Sustained emphasis on improvement of vaccination coverage, birth hygiene, and surveillance, with specific approaches in high-risk areas, has meant that the incidence of the disease continues to fall. Despite this progress, an estimated 58 000 neonates and an unknown number of mothers die every year from tetanus. As of June, 2014, 24 countries are still to eliminate the disease. Maintenance of elimination needs ongoing vaccination programmes and improved public health infrastructure. PMID:25149223

Materials Based on Antimony and Bismuth for Sodium Storage: A Review.

PubMed

Li, Xinyan; Ni, Jiangfeng; Savilov, S V; Li, Liang

2018-06-06

Sodium-ion batteries (SIBs) that efficiently store electricity into chemical energy have been extensively pursued because of their great potential for low-cost and large-scale stationary application such as smart grid and renewable energy. Successful deployment of SIBs requires efficient anode materials that could store Na+ ions via a reversible way at reasonable rates. Materials based on antimony and bismuth are capable of storing a high-concentration of Na+ ions via a reversible alloying reaction at suitable redox potentials, and thus havedrawn substantial attention. However, these electrode materials are facing significant technical challenges, such as poor conductivity, multiple phase transformation, and severe volume swelling and shrinking, which make efficient materials design a necessity. In this review, we will give a latest overview of research progress in the design and application of electrode materials based on antimony and bismuth, and offer some value insights into their future development in sodium storage. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Optimal design and uncertainty quantification in blood flow simulations for congenital heart disease

NASA Astrophysics Data System (ADS)

Marsden, Alison

2009-11-01

Recent work has demonstrated substantial progress in capabilities for patient-specific cardiovascular flow simulations. Recent advances include increasingly complex geometries, physiological flow conditions, and fluid structure interaction. However inputs to these simulations, including medical image data, catheter-derived pressures and material properties, can have significant uncertainties associated with them. For simulations to predict clinically useful and reliable output information, it is necessary to quantify the effects of input uncertainties on outputs of interest. In addition, blood flow simulation tools can now be efficiently coupled to shape optimization algorithms for surgery design applications, and these tools should incorporate uncertainty information. We present a unified framework to systematically and efficient account for uncertainties in simulations using adaptive stochastic collocation. In addition, we present a framework for derivative-free optimization of cardiovascular geometries, and layer these tools to perform optimization under uncertainty. These methods are demonstrated using simulations and surgery optimization to improve hemodynamics in pediatric cardiology applications.

A Framework to Expand and Advance Probabilistic Risk Assessment to Support Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; David Schwieder; Robert Nourgaliev

2012-09-01

During the early development of nuclear power plants, researchers and engineers focused on many aspects of plant operation, two of which were getting the newly-found technology to work and minimizing the likelihood of perceived accidents through redundancy and diversity. As time, and our experience, has progressed, the realization of plant operational risk/reliability has entered into the design, operation, and regulation of these plants. But, to date, we have only dabbled at the surface of risk and reliability technologies. For the next generation of small modular reactors (SMRs), it is imperative that these technologies evolve into an accepted, encompassing, validated, andmore » integral part of the plant in order to reduce costs and to demonstrate safe operation. Further, while it is presumed that safety margins are substantial for proposed SMR designs, the depiction and demonstration of these margins needs to be better understood in order to optimize the licensing process.« less

Comparative Analysis of CNV Calling Algorithms: Literature Survey and a Case Study Using Bovine High-Density SNP Data.

PubMed

Xu, Lingyang; Hou, Yali; Bickhart, Derek M; Song, Jiuzhou; Liu, George E

2013-06-25

Copy number variations (CNVs) are gains and losses of genomic sequence between two individuals of a species when compared to a reference genome. The data from single nucleotide polymorphism (SNP) microarrays are now routinely used for genotyping, but they also can be utilized for copy number detection. Substantial progress has been made in array design and CNV calling algorithms and at least 10 comparison studies in humans have been published to assess them. In this review, we first survey the literature on existing microarray platforms and CNV calling algorithms. We then examine a number of CNV calling tools to evaluate their impacts using bovine high-density SNP data. Large incongruities in the results from different CNV calling tools highlight the need for standardizing array data collection, quality assessment and experimental validation. Only after careful experimental design and rigorous data filtering can the impacts of CNVs on both normal phenotypic variability and disease susceptibility be fully revealed.

Solid-state optical refrigeration to sub-100 Kelvin regime

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melgaard, Seth D.; Albrecht, Alexander R.; Hehlen, Markus P.

We report that since the first demonstration of net cooling twenty years ago, optical refrigeration of solids has progressed to outperform all other solid-state cooling processes. It has become the first and only solid-state refrigerator capable of reaching cryogenic temperatures, and now the first solid-state cooling below 100 K. Such substantial progress required a multi-disciplinary approach of pump laser absorption enhancement, material characterization and purification, and thermal management. Here we present the culmination of two decades of progress, the record cooling to ≈91K from room temperature.

Solid-state optical refrigeration to sub-100 Kelvin regime

DOE PAGES

Melgaard, Seth D.; Albrecht, Alexander R.; Hehlen, Markus P.; ...

2016-02-05

We report that since the first demonstration of net cooling twenty years ago, optical refrigeration of solids has progressed to outperform all other solid-state cooling processes. It has become the first and only solid-state refrigerator capable of reaching cryogenic temperatures, and now the first solid-state cooling below 100 K. Such substantial progress required a multi-disciplinary approach of pump laser absorption enhancement, material characterization and purification, and thermal management. Here we present the culmination of two decades of progress, the record cooling to ≈91K from room temperature.

Extended-range tiltable micromirror

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, James J; Wiens, Gloria J; Bronson, Jessica R

A tiltable micromirror device is disclosed in which a micromirror is suspended by a progressive linkage with an electrostatic actuator (e.g. a vertical comb actuator or a capacitive plate electrostatic actuator) being located beneath the micromirror. The progressive linkage includes a pair of torsion springs which are connected together to operate similar to a four-bar linkage with spring joints. The progressive linkage provides a non-linear spring constant which can allow the micromirror to be tilted at any angle within its range substantially free from any electrostatic instability or hysteretic behavior.

Solid-state optical refrigeration to sub-100 Kelvin regime

PubMed Central

Melgaard, Seth D.; Albrecht, Alexander R.; Hehlen, Markus P.; Sheik-Bahae, Mansoor

2016-01-01

Since the first demonstration of net cooling twenty years ago, optical refrigeration of solids has progressed to outperform all other solid-state cooling processes. It has become the first and only solid-state refrigerator capable of reaching cryogenic temperatures, and now the first solid-state cooling below 100 K. Such substantial progress required a multi-disciplinary approach of pump laser absorption enhancement, material characterization and purification, and thermal management. Here we present the culmination of two decades of progress, the record cooling to ≈ 91 K from room temperature. PMID:26847703

Artificial intelligence and deep learning - Radiology's next frontier?

PubMed

Mayo, Ray Cody; Leung, Jessica

Tracing the use of computers in the radiology department from administrative functions through image acquisition, storage, and reporting, to early attempts at improved diagnosis, we begin to imagine possible new frontiers for their use in exam interpretation. Given their initially slow but ultimately substantial progress in the noninterpretive areas, we are left desiring and even expecting more in the interpretation realm. New technological advances may provide the next wave of progress and radiologists should be early adopters. Several potential applications are discussed and hopefully will serve to inspire future progress. Published by Elsevier Inc.

Fast progressive lower motor neuron disease is an ALS variant: A two-centre tract of interest-based MRI data analysis.

PubMed

Müller, Hans-Peter; Agosta, Federica; Riva, Nilo; Spinelli, Edoardo G; Comi, Giancarlo; Ludolph, Albert C; Filippi, Massimo; Kassubek, Jan

2018-01-01

The criteria for assessing upper motor neuron pathology in pure lower motor neuron disease (LMND) still remain a major issue of debate with respect to the clinical classification as an amyotrophic lateral sclerosis (ALS) variant. The study was designed to investigate white matter damage by a hypothesis-guided tract-of-interest-based approach in patients with LMND compared with healthy controls and ´classical´ ALS patients in order to identify in vivo brain structural changes according to the neuropathologically defined ALS affectation pattern. Data were pooled from two previous studies at two different study sites (Ulm, Germany and Milano, Italy). DTI-based white matter integrity mapping was performed by voxelwise statistical comparison and by a tractwise analysis of fractional anisotropy (FA) maps according to the ALS-staging pattern for 65 LMND patients (clinically differentiated in fast and slow progressors) vs. 92 matched controls and 101 ALS patients with a 'classical' phenotype to identify white matter structural alterations. The analysis of white matter structural connectivity by regional FA reductions demonstrated the characteristic alteration patterns along the CST and also in frontal and prefrontal brain areas in LMND patients compared to controls and ALS. Fast progressing LMND showed substantial involvement, like in ALS, while slow progressors showed less severe alterations. In the tract-specific analysis according to the ALS-staging pattern, fast progressing LMND showed significant alterations of ALS-related tract systems as compared to slow progressors and controls. This study showed an affectation pattern for corticoefferent fibers in LMND with fast disease progression as defined for ALS, that way confirming the hypothesis that fast progressing LMND is a phenotypical variant of ALS.

Progress and Design Concerns of Nanostructured Solar Energy Harvesting Devices.

PubMed

Leung, Siu-Fung; Zhang, Qianpeng; Tavakoli, Mohammad Mahdi; He, Jin; Mo, Xiaoliang; Fan, Zhiyong

2016-05-01

Integrating devices with nanostructures is considered a promising strategy to improve the performance of solar energy harvesting devices such as photovoltaic (PV) devices and photo-electrochemical (PEC) solar water splitting devices. Extensive efforts have been exerted to improve the power conversion efficiencies (PCE) of such devices by utilizing novel nanostructures to revolutionize device structural designs. The thicknesses of light absorber and material consumption can be substantially reduced because of light trapping with nanostructures. Meanwhile, the utilization of nanostructures can also result in more effective carrier collection by shortening the photogenerated carrier collection path length. Nevertheless, performance optimization of nanostructured solar energy harvesting devices requires a rational design of various aspects of the nanostructures, such as their shape, aspect ratio, periodicity, etc. Without this, the utilization of nanostructures can lead to compromised device performance as the incorporation of these structures can result in defects and additional carrier recombination. The design guidelines of solar energy harvesting devices are summarized, including thin film non-uniformity on nanostructures, surface recombination, parasitic absorption, and the importance of uniform distribution of photo-generated carriers. A systematic view of the design concerns will assist better understanding of device physics and benefit the fabrication of high performance devices in the future. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

14 CFR 21.97 - Approval of major changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must submit substantiating data and necessary descriptive data for inclusion in the type design. (b... major change in type design must— (1) Provide substantiating data and necessary descriptive data for... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Approval of major changes in type design...

Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

DOE PAGES

Tan, C. Y.; Dey, J. E.; Duel, K. L.; ...

2017-05-01

This is a status report on the 2nd harmonic cavity for the Fermilab Booster as part of the Proton Improvement Plan (PIP) for increasing beam transmission efficiency, and thus reducing losses. A set of tuner rings has been procured and is undergoing quality control tests. The Y567 tube for driving the cavity has been successfully tested at both injection and extraction frequencies. A cooling scheme for the tuner and cavity has been developed after a thorough thermal analysis of the system. RF windows have been procured and substantial progress has been made on the mechanical designs of the cavity andmore » the bias solenoid. Finally, the goal is to have a prototype cavity ready for testing by the end of 2017.« less

Moonshot Objectives: Catalyze New Scientific Breakthroughs-Proteogenomics.

PubMed

Rodland, Karin D; Piehowski, Paul; Smith, Richard D

Breaking down the silos between disciplines to accelerate the pace of cancer research is a key paradigm for the Cancer Moonshot. Molecular analyses of cancer biology have tended to segregate between a focus on nucleic acids-DNA, RNA, and their modifications-and a focus on proteins and protein function. Proteogenomics represents a fusion of those two approaches, leveraging the strengths of each to provide a more integrated vision of the flow of information from DNA to RNA to protein and eventually function at the molecular level. Proteogenomic studies have been incorporated into multiple activities associated with the Cancer Moonshot, demonstrating substantial added value. Innovative study designs integrating genomic, transcriptomic, and proteomic data, particularly those using clinically relevant samples and involving clinical trials, are poised to provide new insights regarding cancer risk, progression, and response to therapy.

Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, C. Y.; Dey, J. E.; Duel, K. L.

This is a status report on the 2nd harmonic cavity for the Fermilab Booster as part of the Proton Improvement Plan (PIP) for increasing beam transmission efficiency, and thus reducing losses. A set of tuner rings has been procured and is undergoing quality control tests. The Y567 tube for driving the cavity has been successfully tested at both injection and extraction frequencies. A cooling scheme for the tuner and cavity has been developed after a thorough thermal analysis of the system. RF windows have been procured and substantial progress has been made on the mechanical designs of the cavity andmore » the bias solenoid. Finally, the goal is to have a prototype cavity ready for testing by the end of 2017.« less

Dramatic enhancement of near-infrared intersubband absorption in c-plane AlInN/GaN superlattices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirazi-HD, M.; Birck Nanotechnology Center, West Lafayette, Indiana 47907; Turkmeneli, K.

2016-03-21

We report substantial improvement of near-infrared (2–2.6 μm) intersubband absorption in c-plane AlInN/GaN superlattices grown by molecular beam epitaxy. Progress was obtained through optimization of AlInN growth conditions using an AlInN growth rate of 0.9-nm/min at substrate temperature of 550 °C, as well as by judiciously placing the charge into two delta-doping sheets. Structural characterization suggests that AlInN crystal quality is enhanced and interface roughness is reduced. Importantly, near-infrared absorption data indicate that the optical quality of the AlInN/GaN superlattices is now comparable with that of AlN/GaN superlattices designed to exploit near-infrared intersubband transitions.

Teamwork and team training in the ICU: where do the similarities with aviation end?

PubMed

Reader, Tom W; Cuthbertson, Brian H

2011-01-01

The aviation industry has made significant progress in identifying the skills and behaviors that result in effective teamwork. Its conceptualization of teamwork, development of training programs, and design of assessment tools are highly relevant to the intensive care unit (ICU). Team skills are important for maintaining safety in both domains, as multidisciplinary teams must work effectively under highly complex, stressful, and uncertain conditions. However, there are substantial differences in the nature of work and structure of teams in the ICU in comparison with those in aviation. While intensive care medicine may wish to use the advances made by the aviation industry for conceptualizing team skills and implementing team training programs, interventions must be tailored to the highly specific demands of the ICU.

Targeting cancer with kinase inhibitors

PubMed Central

Gross, Stefan; Rahal, Rami; Stransky, Nicolas; Lengauer, Christoph; Hoeflich, Klaus P.

2015-01-01

Kinase inhibitors have played an increasingly prominent role in the treatment of cancer and other diseases. Currently, more than 25 oncology drugs that target kinases have been approved, and numerous additional therapeutics are in various stages of clinical evaluation. In this Review, we provide an in-depth analysis of activation mechanisms for kinases in cancer, highlight recent successes in drug discovery, and demonstrate the clinical impact of selective kinase inhibitors. We also describe the substantial progress that has been made in designing next-generation inhibitors to circumvent on-target resistance mechanisms, as well as ongoing strategies for combining kinase inhibitors in the clinic. Last, there are numerous prospects for the discovery of novel kinase targets, and we explore cancer immunotherapy as a new and promising research area for studying kinase biology. PMID:25932675

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuypers, Marshall A.; Lambert, Gregory Joseph; Moore, Thomas W.

Chronic infection with Hepatitis C virus (HCV) results in cirrhosis, liver cancer and death. As the nations largest provider of care for HCV, US Veterans Health Administration (VHA) invests extensive resources in the diagnosis and treatment of the disease. This report documents modeling and analysis of HCV treatment dynamics performed for the VHA aimed at improving service delivery efficiency. System dynamics modeling of disease treatment demonstrated the benefits of early detection and the role of comorbidities in disease progress and patient mortality. Preliminary modeling showed that adherence to rigorous treatment protocols is a primary determinant of treatment success. In depthmore » meta-analysis revealed correlations of adherence and various psycho-social factors. This initial meta-analysis indicates areas where substantial improvement in patient outcomes can potentially result from VA programs which incorporate these factors into their design.« less

Teamwork and team training in the ICU: Where do the similarities with aviation end?

PubMed Central

2011-01-01

The aviation industry has made significant progress in identifying the skills and behaviors that result in effective teamwork. Its conceptualization of teamwork, development of training programs, and design of assessment tools are highly relevant to the intensive care unit (ICU). Team skills are important for maintaining safety in both domains, as multidisciplinary teams must work effectively under highly complex, stressful, and uncertain conditions. However, there are substantial differences in the nature of work and structure of teams in the ICU in comparison with those in aviation. While intensive care medicine may wish to use the advances made by the aviation industry for conceptualizing team skills and implementing team training programs, interventions must be tailored to the highly specific demands of the ICU. PMID:22136283

Aligning incentives in orthopaedics: opportunities and challenges -- the Case Medical Center experience.

PubMed

Marcus, Randall E; Zenty, Thomas F; Adelman, Harlin G

2009-10-01

For 30 years, the orthopaedic faculty at Case Western Reserve University worked as an independent private corporation within University Hospitals Case Medical Center (Hospital). However, by 2002, it became progressively obvious to our orthopaedic practice that we needed to modify our business model to better manage the healthcare regulatory changes and decreased reimbursement if we were to continue to attract and retain the best and brightest orthopaedic surgeons to our practice. In 2002, our surgeons created a new entity wholly owned by the parent corporation at the Hospital. As part of this transaction, the parties negotiated a balanced employment model designed to fully integrate the orthopaedic surgeons into the integrated delivery system that included the Hospital. This new faculty practice plan adopted a RVU-based compensation model for the physicians, with components that created incentives both for clinical practice and for academic and administrative service contributions. Over the past 5 years, aligning incentives with the Hospital has substantially increased the clinical productivity of the surgeons and has also benefited the Hospital and our patients. Furthermore, aligned incentives between surgeons and hospitals could be of substantial financial benefit to both, as Medicare moves forward with its bundled project initiative.

ASH Position Paper: Dietary approaches to lower blood pressure.

PubMed

Appel, Lawrence J; Giles, Thomas D; Black, Henry R; Izzo, Joseph L; Materson, Barry J; Oparil, Suzanne; Weber, Michael A

2009-07-01

A substantial body of evidence has implicated several aspects of diet in the pathogenesis of elevated blood pressure (BP). Well-established risk factors for elevated BP include excess salt intake, low potassium intake, excess weight, high alcohol consumption, and suboptimal dietary pattern. African Americans are especially sensitive to the BP-raising effects of excess salt intake, insufficient potassium intake, and suboptimal diet. In this setting, dietary changes have the potential to substantially reduce racial disparities in BP and its consequences. In view of the age-related rise in BP in both children and adults, the direct, progressive relationship of BP with cardiovascular-renal diseases throughout the usual range of BP, and the worldwide epidemic of BP-related disease, efforts to reduce BP in nonhypertensive as well as hypertensive individuals are warranted. In nonhypertensives, dietary changes can lower BP and delay, if not prevent, hypertension. In uncomplicated stage I hypertension, dietary changes serve as initial treatment before drug therapy. In hypertensive individuals already on drug therapy, lifestyle modifications can further lower BP. The current challenge is designing and implementing effective clinical and public health interventions that lead to sustained dietary changes among individuals and more broadly in the general population.

Uremic Solutes in Chronic Kidney Disease and Their Role in Progression.

PubMed

van den Brand, Jan A J G; Mutsaers, Henricus A M; van Zuilen, Arjan D; Blankestijn, Peter J; van den Broek, Petra H; Russel, Frans G M; Masereeuw, Rosalinde; Wetzels, Jack F M

2016-01-01

To date, over 150 possible uremic solutes have been listed, but their role in the progression of CKD is largely unknown. Here, the association between a selected panel of uremic solutes and progression in CKD patients was investigated. Patients from the MASTERPLAN study, a randomized controlled trial in CKD patients with a creatinine clearance between 20 and 70 ml/min per 1.73m2, were selected based on their rate of eGFR decline during the first five years of follow-up. They were categorized as rapid (decline >5 ml/min per year) or slow progressors. Concentrations of eleven uremic solutes were obtained at baseline and after one year of follow-up. Logistic regression was used to compare the odds for rapid to slow progression by uremic solute concentrations at baseline. Variability in uremic solute levels was assessed using scatter plots, and limits of variability were calculated. In total, 40 rapidly and 40 slowly progressing patients were included. Uremic solutes were elevated in all patients compared to reference values for healthy persons. The serum levels of uremic solutes were not associated with rapid progression. Moreover, we observed substantial variability in solute levels over time. Elevated concentrations of uremic solutes measured in this study did not explain differences in rate of eGFR decline in CKD patients, possibly due to lack of power as a result of the small sample size, substantial between patient variability, and variability in solute concentrations over time. The etiology of intra-individual variation in uremic solute levels remains to be elucidated.

Dr. Goddard and a 1918 version of 'Bazooka'

NASA Technical Reports Server (NTRS)

2004-01-01

Dr. Robert H. Goddard loading a 1918 version of the Bazooka of World War II. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

Impact of Blood Flow Restriction Exercise on Muscle Fatigue Development and Recovery.

PubMed

Husmann, Florian; Mittlmeier, Thomas; Bruhn, Sven; Zschorlich, Volker; Behrens, Martin

2018-03-01

The present study was designed to provide mechanistic insight into the time course and etiology of muscle fatigue development and recovery during and after low-intensity exercise when it is combined with blood flow restriction (BFR). Seventeen resistance-trained males completed four sets of low-intensity isotonic resistance exercise under two experimental conditions: knee extension exercise (i) with BFR and (ii) without BFR (CON). Neuromuscular tests were performed before, during (immediately after each set of knee extension exercise), and 1, 2, 4, and 8 min after each experimental condition. Maximal voluntary torque, quadriceps twitch torque in response to paired electrical stimuli at 10 Hz (PS10) and 100 Hz (PS100), PS10·PS100 ratio as an index of low-frequency fatigue, and voluntary activation were measured under isometric conditions. Perceptual and EMG data were recorded during each exercise condition. After the first set of exercise, BFR induced significantly greater reductions in maximal voluntary torque, PS100, and PS10·PS100 ratio compared with CON. These parameters progressively declined throughout the BFR protocol but recovered substantially within 2 min postexercise when blood flow was restored. Neither a progressive decline in the course of the exercise protocol nor a substantial recovery of these parameters occurred during and after CON. Only at exercise termination, voluntary activation differed significantly between BFR and CON with greater reductions during BFR. At the early stage of exercise, BFR exacerbated the development of muscle fatigue mainly due to a pronounced impairment in contractile function. Despite the high level of muscle fatigue during BFR exercise, the effect of BFR on muscle fatigue was diminished after 2 min of reperfusion, suggesting that BFR has a strong but short-lasting effect on neuromuscular function.

NASA's Space Launch System: Building a New Capability for Discovery

NASA Technical Reports Server (NTRS)

Creech, Stephen D.; Robinson, Kimberly F.

2015-01-01

Designed to enable human space exploration missions, including eventually landings on Mars, NASA's Space Launch System (SLS) represents a unique launch capability with a wide range of utilization opportunities, from delivering habitation systems into the lunar vicinity to high-energy transits through the outer solar system. Substantial progress has been made toward the first launch of the initial configuration of SLS, which will be able to deliver more than 70 metric tons of payload into low Earth orbit (LEO). The vehicle will then be evolved into more powerful configurations, culminating with the capability to deliver more than 130 metric tons to LEO. The initial configuration will be able to deliver greater mass to orbit than any contemporary launch vehicle, and the evolved configuration will have greater performance than the Saturn V rocket that enabled human landings on the moon. SLS will also be able to carry larger payload fairings than any contemporary launch vehicle, and will offer opportunities for co-manifested and secondary payloads. Because of its substantial mass-lift capability, SLS will also offer unrivaled departure energy, enabling mission profiles currently not possible. The basic capabilities of SLS have been driven by studies on the requirements of human deep-space exploration missions, and continue to be validated by maturing analysis of Mars mission options. Early collaboration with science teams planning future decadal-class missions have contributed to a greater understanding of the vehicle's potential range of utilization. As this paper will explain, SLS is making measurable progress toward becoming a global infrastructure asset for robotic and human scouts of all nations by providing the robust space launch capability to deliver sustainable solutions for exploration.

Interobserver agreement on Poser's and the new McDonald's diagnostic criteria for multiple sclerosis.

PubMed

Zipoli, V; Portaccio, E; Siracusa, G; Pracucci, G; Sorbi, S; Amato, M P

2003-10-01

We assessed the interobserver agreement on the diagnosis of multiple sclerosis (MS) in a study sample consisting of 41 MS (15 relapsing remitting, two secondary progressive, five primary progressive and 19 presenting their first clinical attack) and three non-MS cases. Clinical and paraclinical information was recorded in standardized forms. Four neurologists were asked to make a diagnosis using Poser's and McDonald's criteria and to assess MRI scans according to the McDonald's guidelines. In terms of the kappa statistic (kappa), we found a moderate agreement on the overall diagnosis using both Poser's and McDonald's criteria (kappa, respectively 0.57 and 0.52). As for distinct diagnostic categories, we observed a moderate to substantial agreement for the three McDonald categories (range of kappa values 0.49-0.64) and a fair to substantial agreement for the nine Poser categories (range of kappa values 0.37-0.67). Taking into account clinical information, the agreement on dissemination over time was substantially higher (kappa = 0.69) than that found on dissemination over space (kappa = 0.46). In contrast, for MRI assessment, the agreement for spatial dissemination was substantial (kappa = 0.74) compared with the fair agreement (kappa = 0.25) yielded by dissemination over time. The new McDonald's criteria yield a good overall diagnostic reliability, and compare favourably with Poser's classification in terms of agreement on distinct diagnostic categories.

Progress toward understanding the contribution of alkali generation in dental biofilms to inhibition of dental caries

PubMed Central

Liu, Ya-Ling; Nascimento, Marcelle; Burne, Robert A

2012-01-01

Alkali production by oral bacteria is believed to have a major impact on oral microbial ecology and to be inibitory to the initiation and progression of dental caries. A substantial body of evidence is beginning to accumulate that indicates the modulation of the alkalinogenic potential of dental biofilms may be a promising strategy for caries control. This brief review highlights recent progress toward understanding molecular genetic and physiologic aspects of important alkali-generating pathways in oral bacteria, and the role of alkali production in the ecology of dental biofilms in health and disease. PMID:22996271

Imaging Cellular Architecture with X-rays

PubMed Central

Larabell, Carolyn A.; Nugent, Keith A.

2012-01-01

X-ray imaging of biological samples is progressing rapidly. In this paper we review the progress to date in high resolution imaging of cellular architecture. In particular we survey the progress in soft X-ray tomography and argue that the field is coming of age and that important biological insights are starting to emerge. We then review the new ideas based on coherent diffraction. These methods are at a much earlier stage of development but, as they eliminate the need for X-ray optics, have the capacity to provide substantially better spatial resolution than zone plate based methods. PMID:20869868

A dynamic seating intervention for wheelchair seating discomfort.

PubMed

Crane, Barbara A; Holm, Margo B; Hobson, Douglas; Cooper, Rory A; Reed, Matthew P

2007-12-01

The objective of this study was to examine the effectiveness of a new user-adjustable wheelchair seating system designed to relieve discomfort for long-duration wheelchair users. This objective was carried out using the newly developed Tool for Assessing Wheelchair disComfort (TAWC) as the primary outcome measure. Two wheelchair users each tested two different designs and feedback from the wheelchair users regarding the first design was used to guide development of the second design. A single-subject research methodology was used, allowing long-duration (up to 2 wks per test) evaluation of the wheelchair seating systems and comparison of subject discomfort levels with those experienced during a baseline period using their own wheelchairs. The experimental wheelchair seating systems employed existing automotive seating with embedded pneumatic bladders that allowed adjustment of the seat and back-support characteristics. The test wheelchair also had tilt, recline, and elevating leg rests. The two subjects completed limited periods of testing with the first design, both finding poor results with either stable or increased levels of discomfort. Subject feedback was used to redesign the wheelchair seat. After redesign, both subjects tested the second design and found it substantially more comfortable. The selected research methodology was a very positive method for a progressive wheelchair seating design and the second design provided improved comfort for both users when compared with that experienced using their own wheelchairs and the first test wheelchair. Future research of this type of user-controlled technology is recommended.

Progression of Inflammatory Bowel Disease to Cancer: Is the Patient Better Off without Lymphatic Vessels or Nodes (or Angiopoietin 2)?

DTIC Science & Technology

2013-12-01

carcinoma (CRC) in IBD patients and experimental models. Nonetheless, the pathogenic link, interrelationship, and practical clinical application of these...and are continuing final data analysis and latest imaging studies. This project has potentially high impact because of the substantial incidence of...pathogenic link, interrelationship, and practical clinical application of these various theories of progression have remained elusive. We proposed that

Early Rockets

NASA Image and Video Library

1940-03-21

Goddard rocket in launching tower at Roswell, New Mexico, March 21, 1940. Fuel was injected by pumps from the fueling platform at left. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

Early Rockets

NASA Image and Video Library

2004-04-15

Goddard rocket with four rocket motors. This rocket attained an altitude of 200 feet in a flight, November 1936, at Roswell, New Mexico. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

The natural history of multiple sclerosis: a geographically based study. 5. The clinical features and natural history of primary progressive multiple sclerosis.

PubMed

Cottrell, D A; Kremenchutzky, M; Rice, G P; Koopman, W J; Hader, W; Baskerville, J; Ebers, G C

1999-04-01

We report a natural history study of 216 patients with primary progressive (PP)- multiple sclerosis defined by at least 1 year of exacerbation-free progression at onset. This represents 19.8% of a largely population-based patient cohort having a mean longitudinal follow-up of 23 years. This subgroup of PP-multiple sclerosis patients had a mean age of onset of 38.5 years, with females predominating by a ratio of 1.3:1.0. The rate of deterioration from disease onset was substantially more rapid than for relapsing-remitting multiple sclerosis, with a median time to disability status score (DSS) 6 and DSS 8 of 8 and 18 years, respectively. Forty-nine percent of patients were followed through to death. Examination of the early disease course revealed two groups with adverse prognostic profiles. Firstly, a shorter time to reach DSS 3 from onset of PP-multiple sclerosis significantly adversely influenced time to DSS 8. Second, involvement of three or more neurological systems at onset resulted in a median time to DSS 10 of 13.5 years in contrast to PP-multiple sclerosis patients with one system involved at onset where median time to death from multiple sclerosis was 33.2 years. However, age, gender and type of neurological system involved at onset appeared to have little influence on prognosis. Life expectancy, cause of mortality and familial history profile were similar in PP-multiple sclerosis and non-PP-multiple sclerosis (all other multiple sclerosis patients from the total population). From clinical onset, rate of progression was faster in the PP-multiple sclerosis group than in the secondary progressive (SP)-multiple sclerosis group. When the rates of progression from onset of the progressive phase to DSS 6, 8 and 10 were compared, SP-multiple sclerosis had a more rapid progressive phase. A substantial minority (28%) of the PP-multiple sclerosis cohort had a distinct relapse even decades after onset of progressive deterioration. These studies establish natural history outcomes for the subgroup of multiple sclerosis patients with primary progressive disease.

Restructuring Graduate Medical Education to Meet the Health Care Needs of Emirati Citizens

PubMed Central

Abdel-Razig, Sawsan; Alameri, Hatem

2013-01-01

Many nations are struggling with the design, implementation, and ongoing improvement of health care systems to meet the needs of their citizens. In the United Arab Emirates, a small nation with vast wealth, the lives of average citizens have evolved from a harsh, nomadic existence to enjoyment of the comforts of modern life. Substantial progress has been made in the provision of education, housing, health, employment, and other forms of social advancement. Having covered these basic needs, the government of Abu Dhabi, United Arab Emirates, is responding to the challenge of developing a comprehensive health system to serve the needs of its citizens, including restructuring the nation's graduate medical education (GME) system. We describe how Abu Dhabi is establishing GME policies and infrastructure to develop and support a comprehensive health care system, while also being responsive to population health needs. We review recent progress in developing a systematic approach for developing GME infrastructure in this small emirate, and discuss how the process of designing a GME system to meet the needs of Emirati citizens has benefited from the experience of “Western” nations. We also examine the challenges we encountered in this process and the solutions adopted, adapted, or specifically developed to meet local needs. We conclude by highlighting how our experience “at the GME drawing board” reflects the challenges encountered by scholars, administrators, and policymakers in nations around the world as they seek to coordinate health care and GME resources to ensure care for populations. PMID:24404259

Restructuring graduate medical education to meet the health care needs of emirati citizens.

PubMed

Abdel-Razig, Sawsan; Alameri, Hatem

2013-06-01

Many nations are struggling with the design, implementation, and ongoing improvement of health care systems to meet the needs of their citizens. In the United Arab Emirates, a small nation with vast wealth, the lives of average citizens have evolved from a harsh, nomadic existence to enjoyment of the comforts of modern life. Substantial progress has been made in the provision of education, housing, health, employment, and other forms of social advancement. Having covered these basic needs, the government of Abu Dhabi, United Arab Emirates, is responding to the challenge of developing a comprehensive health system to serve the needs of its citizens, including restructuring the nation's graduate medical education (GME) system. We describe how Abu Dhabi is establishing GME policies and infrastructure to develop and support a comprehensive health care system, while also being responsive to population health needs. We review recent progress in developing a systematic approach for developing GME infrastructure in this small emirate, and discuss how the process of designing a GME system to meet the needs of Emirati citizens has benefited from the experience of "Western" nations. We also examine the challenges we encountered in this process and the solutions adopted, adapted, or specifically developed to meet local needs. We conclude by highlighting how our experience "at the GME drawing board" reflects the challenges encountered by scholars, administrators, and policymakers in nations around the world as they seek to coordinate health care and GME resources to ensure care for populations.

Progress Towards a Microtrap Array for Positron Storage

NASA Astrophysics Data System (ADS)

Narimannezhad, Alireza; Weber, Marc H.; Jennings, Joshah; Minnal, Chandrasekar; Lynn, Kelvin G.

2014-10-01

The storage of positrons has been a key for antimatter research and applications. One important goal is the attempt to reach higher densities of confined antimatter particles. Progress in this area is explored through a novel microtrap array with large length to radius aspect ratios and radii of the order of tens of microns. The proposed design consists of microtraps with substantially lower barrier potentials than conventional Penning-Malmberg traps arranged in parallel within a single magnet. Simulations showed positron plasma with 1E10 cm-3 density evolves toward a rigid-rotation phase in each microtrap while 10 V barriers confined the plasma axially. A trap of 4 cm length including more than 20,000 microtubes with 50 micron radii was fabricated and tested. Experiments conducted with electrons in a test structure addressing each microtube with a narrow beam will be described. This will explore the basic physics of the microtraps. Observed results were promising and they open a new avenue for manipulating high-density non-neutral plasmas. This work was supported by the Army Research Laboratory under Contract W9113M-09-C-0075, and the Office of Naval Research under Award #N00014-10-1-0543.

Progressive freezing of interacting spins in isolated finite magnetic ensembles

NASA Astrophysics Data System (ADS)

Bhattacharya, Kakoli; Dupuis, Veronique; Le-Roy, Damien; Deb, Pritam

2017-02-01

Self-organization of magnetic nanoparticles into secondary nanostructures provides an innovative way for designing functional nanomaterials with novel properties, different from the constituent primary nanoparticles as well as their bulk counterparts. Collective magnetic properties of such complex closed packing of magnetic nanoparticles makes them more appealing than the individual magnetic nanoparticles in many technological applications. This work reports the collective magnetic behaviour of magnetic ensembles comprising of single domain Fe3O4 nanoparticles. The present work reveals that the ensemble formation is based on the re-orientation and attachment of the nanoparticles in an iso-oriented fashion at the mesoscale regime. Comprehensive dc magnetic measurements show the prevalence of strong interparticle interactions in the ensembles. Due to the close range organization of primary Fe3O4 nanoparticles in the ensemble, the spins of the individual nanoparticles interact through dipolar interactions as realized from remnant magnetization measurements. Signature of super spin glass like behaviour in the ensembles is observed in the memory studies carried out in field cooled conditions. Progressive freezing of spins in the ensembles is corroborated from the Vogel-Fulcher fit of the susceptibility data. Dynamic scaling of relaxation reasserted slow spin dynamics substantiating cluster spin glass like behaviour in the ensembles.

Female STEM majors wanted: The impact of certain factors on choice of a college major

NASA Astrophysics Data System (ADS)

Conrad, Walter Michael

Although females have made significant strides in educational achievements and substantial inroads into academic majors, such as business and medicine, they have made considerably less progress in the science, technology, engineering, and math (STEM) fields. This translates into a smaller number of female graduates prepared to work in the science career fields and results in American industry looking to other countries for its educated workforce. A mixed-methods research design was used to explore and understand the lived experiences and perceptions of faculty members and working STEM professionals in Northern and Central Virginia. Results indicated that although females are attaining STEM degrees and entering STEM fields in record numbers, obstacles such as a challenging STEM curriculum, bias, feelings of insecurity, lack of female role models, and inadequate preparation for the STEM workforce could impede the progress females have made. This research makes recommendations to the academic community and industry which may be used as retention and recruitment strategies for females considering a career in STEM. The ultimate goal is to significantly increase the number of highly skilled female graduates entering STEM fields, leading the U.S. to regain its previous position atop the world in technological innovation and leadership.

Prospects for improving the salt tolerance of forest trees: A review

USGS Publications Warehouse

Allen, J.A.; Chambers, J.L.; Stine, M.

1994-01-01

Three major themes related to the improvement of salt tolerance in forest tree species are examined. First, evidence demonstrating that substantial intraspecific variation in salt tolerance exists in many species is presented. This evidence is important because it suggests that efforts to improve salt tolerance through conventional plant breeding techniques are justified. Second, the physiological and genetic mechanisms controlling salt tolerance are discussed briefly. Although salt tolerance involves the integration of numerous physiological processes, there is considerable evidence that differences in the ability to exclude Na+ and Cl- from leaves are the most important factors underlying intraspecific differences in tolerance. It is also becoming apparent that, although salt tolerance is a multigenic trait, major genes play an important role. Third, progress to date in improving salt tolerance of forest tree species is assessed. Compared with agricultural crops, relatively little progress has been made with either conventional or biotechnological methods, but field trials designed to test clones identified as salt tolerant in screening trials are underway now in several countries. We conclude that there is justification for cautious optimism about the prospects for improving salt tolerance in forest tree species.

Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course

NASA Astrophysics Data System (ADS)

Liu, Yucheng

2017-11-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became the most important course component and critical assessment tool, from which problem-solving skills as well as employability skills of the ME students can be fully developed. Hands-on experiences in finite element analysis (FEA) modelling and simulation were also added into the renovated curriculum to promote the application of FEA on engineering design and assessment. Evaluation of the renovated course was conducted using two instruments and the results have shown that the course made the ME senior students more prepared for their future career and a win-win model was created between the industry partner and the ME programme through it. Impact of the renovated syllabus on Accreditation Board for Engineering Technology goals was discussed. Based on the current progress, a more substantial change is being planned to further improve the effectiveness and practicability of this design course. The renovated course was started to offer to the ME senior students at Mississippi State University.

Compact optical multipass matrix system design based on slicer mirrors.

PubMed

Guo, Yin; Sun, Liqun

2018-02-10

High path-to-volume ratio (PVR) and low-aberration-output beams are the two main criteria to assess the performance of multipass absorption cells. However, no substantial progress has been reported for large-numerical-aperture-coupled multipass cells, which is due to the accumulated aberrations caused by a large number of off-axis reflections. Based on Chernin's design, in this study, we modified Chernin's four-objective multipass matrix cell by using slicer mirrors to eliminate alignment difficulty and decrease the system volume. A generalized design routine based on user requirements is also proposed. Based on the automatic modeling tool package (Pyzdde) connected with Zemax and boundary conditions of the parameters selection proposed, a low-aberration-output beam and a high PVR are easily obtained compared with other multipass cells schemes. In one demo design, 108 passes (5×7 matrix spots) in a base length of 300 mm are presented. The PVR and peak-to-valley value wavefront errors are 67.5 m/L and 0.92 μm, respectively. Finally, a tolerance analysis of this optical multipass system is also presented. This work may provide better broadband optical absorption cells in terms of response time and a better detection sensitivity in versatile applications.

Open Questions on the Global Contraction of Mercury

NASA Astrophysics Data System (ADS)

Klimczak, C.; Byrne, P. K.

2018-05-01

Substantial progress has been made on determining the amount, timing, and rate of global contraction on Mercury. But many open questions remain to be answered about the process itself, associated landforms, and interactions with other processes.

Elucidating the alkaline oxygen evolution reaction mechanism on platinum

DOE PAGES

Favaro, M.; Valero-Vidal, C.; Eichhorn, J.; ...

2017-03-07

Understanding the interplay between surface chemistry, electronic structure, and reaction mechanism of the catalyst at the electrified solid/liquid interface will enable the design of more efficient materials systems for sustainable energy production. The substantial progress in operando characterization, particularly using synchrotron based X-ray spectroscopies, provides the unprecedented opportunity to uncover surface chemical and structural transformations under various (electro)chemical reaction environments. In this work, we study a polycrystalline platinum surface under oxygen evolution conditions in an alkaline electrolyte by means of ambient pressure X-ray photoelectron spectroscopy performed at the electrified solid/liquid interface. We elucidate previously inaccessible aspects of the surface chemistrymore » and structure as a function of the applied potential, allowing us to propose a reaction mechanism for oxygen evolution on a platinum electrode in alkaline solutions.« less

The Evolution of Ambulatory Medical Record Systems in the U.S

PubMed Central

Kuhn, Ingeborg M.; Wiederhold, Gio

1981-01-01

This paper is an overview of the developments in Automated Ambulatory Medical Record Systems (AAMRS) from 1975 to the present. A summary of findings from a 1975 state-of-the-art review is presented with the current findings of a follow-up study of the AAMRS. The studies revealed that effective automated medical record systems have been developed for ambulatory care settings and that they are now in the process of being transfered to other sites or users, either privately or as a commercial product. Since 1975 there have been no significant advances in system design. However, progress has been substantial in terms of achieving production goals. Even though a variety of system are commercially available, there is a continuing need for research and development to improve the effectiveness of the systems in use today.

Vortex flow aerodynamics

NASA Technical Reports Server (NTRS)

Smith, J. H. B.; Campbell, J. F.; Young, A. D. (Editor)

1992-01-01

The principal emphasis of the meeting was to be on the understanding and prediction of separation-induced vortex flows and their effects on vehicle performance, stability, control, and structural design loads. This report shows that a substantial amount of the papers covering this area were received from a wide range of countries, together with an attendance that was even more diverse. In itself, this testifies to the current interest in the subject and to the appropriateness of the Panel's choice of topic and approach. An attempt is made to summarize each paper delivered, and to relate the contributions made in the papers and in the discussions to some of the important aspects of vortex flow aerodynamics. This reveals significant progress and important clarifications, but also brings out remaining weaknesses in predictive capability and gaps in understanding. Where possible, conclusions are drawn and areas of continuing concern are identified.

Engineering clinically relevant volumes of vascularized bone.

PubMed

Roux, Brianna M; Cheng, Ming-Huei; Brey, Eric M

2015-05-01

Vascularization remains one of the most important challenges that must be overcome for tissue engineering to be consistently implemented for reconstruction of large volume bone defects. An extensive vascular network is needed for transport of nutrients, waste and progenitor cells required for remodelling and repair. A variety of tissue engineering strategies have been investigated in an attempt to vascularize tissues, including those applying cells, soluble factor delivery strategies, novel design and optimization of bio-active materials, vascular assembly pre-implantation and surgical techniques. However, many of these strategies face substantial barriers that must be overcome prior to their ultimate translation into clinical application. In this review recent progress in engineering vascularized bone will be presented with an emphasis on clinical feasibility. © 2015 The Authors. Journal of Cellular and Molecular Medicine published by John Wiley & Sons Ltd and Foundation for Cellular and Molecular Medicine.

Progress on Complex Langevin simulations of a finite density matrix model for QCD

NASA Astrophysics Data System (ADS)

Bloch, Jacques; Glesaaen, Jonas; Verbaarschot, Jacobus; Zafeiropoulos, Savvas

2018-03-01

We study the Stephanov model, which is an RMT model for QCD at finite density, using the Complex Langevin algorithm. Naive implementation of the algorithm shows convergence towards the phase quenched or quenched theory rather than to intended theory with dynamical quarks. A detailed analysis of this issue and a potential resolution of the failure of this algorithm are discussed. We study the effect of gauge cooling on the Dirac eigenvalue distribution and time evolution of the norm for various cooling norms, which were specifically designed to remove the pathologies of the complex Langevin evolution. The cooling is further supplemented with a shifted representation for the random matrices. Unfortunately, none of these modifications generate a substantial improvement on the complex Langevin evolution and the final results still do not agree with the analytical predictions.

Recommendations of the Global Multiple System Atrophy Research Roadmap Meeting.

PubMed

Walsh, Ryan R; Krismer, Florian; Galpern, Wendy R; Wenning, Gregor K; Low, Phillip A; Halliday, Glenda; Koroshetz, Walter J; Holton, Janice; Quinn, Niall P; Rascol, Olivier; Shaw, Leslie M; Eidelberg, David; Bower, Pam; Cummings, Jeffrey L; Abler, Victor; Biedenharn, Judy; Bitan, Gal; Brooks, David J; Brundin, Patrik; Fernandez, Hubert; Fortier, Philip; Freeman, Roy; Gasser, Thomas; Hewitt, Art; Höglinger, Günter U; Huentelman, Matt J; Jensen, Poul H; Jeromin, Andreas; Kang, Un Jung; Kaufmann, Horacio; Kellerman, Lawrence; Khurana, Vikram; Klockgether, Thomas; Kim, Woojin Scott; Langer, Carol; LeWitt, Peter; Masliah, Eliezer; Meissner, Wassilios; Melki, Ronald; Ostrowitzki, Susanne; Piantadosi, Steven; Poewe, Werner; Robertson, David; Roemer, Cyndi; Schenk, Dale; Schlossmacher, Michael; Schmahmann, Jeremy D; Seppi, Klaus; Shih, Lily; Siderowf, Andrew; Stebbins, Glenn T; Stefanova, Nadia; Tsuji, Shoji; Sutton, Sharon; Zhang, Jing

2018-01-09

Multiple system atrophy (MSA) is a rare neurodegenerative disorder with substantial knowledge gaps despite recent gains in basic and clinical research. In order to make further advances, concerted international collaboration is vital. In 2014, an international meeting involving leaders in the field and MSA advocacy groups was convened in Las Vegas, Nevada, to identify critical research areas where consensus and progress was needed to improve understanding, diagnosis, and treatment of the disease. Eight topic areas were defined: pathogenesis, preclinical modeling, target identification, endophenotyping, clinical measures, imaging biomarkers, nonimaging biomarkers, treatments/trial designs, and patient advocacy. For each topic area, an expert served as a working group chair and each working group developed priority-ranked research recommendations with associated timelines and pathways to reach the intended goals. In this report, each groups' recommendations are provided. Copyright © 2017 American Academy of Neurology.

Applying Item Response Theory Methods to Design a Learning Progression-Based Science Assessment

ERIC Educational Resources Information Center

Chen, Jing

2012-01-01

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1)…

Progress report 3 of cooperative program for design, fabrication, and testing of high modulus composite helicopter shafting

NASA Technical Reports Server (NTRS)

Wright, C. C.; Baker, D. J.

1980-01-01

This report describes the third phase of work, the objective of which was to overcome the excessive brittleness of the previously developed UH-1 helicopter tail rotor drive shaft design which demonstrated a shaft train weight savings of 53.1% over the current 2024-T3 aluminum shaft train. A materials impact program demonstrated exceptionally noteworthy performance of two woven constructions containing E-glass and PRD 49-III (designation later changed to KEVLAR 49) fibers in an epoxy resin matrix. Thermoplastic matrices and PRD 49-III fiber provided impact resistance at low weight which was superior to composites having the same fiber in a thermoset resin matrix. A design, fabrication, and test program showed that shaft impact resistance could be improved over the previously developed graphite composite design at a cost in shaft train rate savings. The shaft train weight savings of the most impact tolerant construction was 4.0% over the current aluminum shaft train. Alternating plies of graphite and glass appear to provide substantially greater tube impact durability than that provided by hybridization of the two fibers into one tape wound to a ply design equivalent in strength and stiffness to that of the alternating ply design. Recommendations were made to continue research work to exploit the potential for more impact-durable structures through the use of KEVLAR 49 fiber, woven structures, thermoplastic matrices and THORNEL 50-S/KEVLAR 49 blends with thermoset matrices.

Dr. Robert H. Goddard and His Rocket

NASA Technical Reports Server (NTRS)

2004-01-01

Goddard rocket with four rocket motors. This rocket attained an altitude of 200 feet in a flight, November 1936, at Roswell, New Mexico. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

Dr. Robert H. Goddard and His Rocket

NASA Technical Reports Server (NTRS)

1940-01-01

Goddard rocket in launching tower at Roswell, New Mexico, March 21, 1940. Fuel was injected by pumps from the fueling platform at left. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

Strengthening of accountability systems to create healthy food environments and reduce global obesity.

PubMed

Swinburn, Boyd; Kraak, Vivica; Rutter, Harry; Vandevijvere, Stefanie; Lobstein, Tim; Sacks, Gary; Gomes, Fabio; Marsh, Tim; Magnusson, Roger

2015-06-20

To achieve WHO's target to halt the rise in obesity and diabetes, dramatic actions are needed to improve the healthiness of food environments. Substantial debate surrounds who is responsible for delivering effective actions and what, specifically, these actions should entail. Arguments are often reduced to a debate between individual and collective responsibilities, and between hard regulatory or fiscal interventions and soft voluntary, education-based approaches. Genuine progress lies beyond the impasse of these entrenched dichotomies. We argue for a strengthening of accountability systems across all actors to substantially improve performance on obesity reduction. In view of the industry opposition and government reluctance to regulate for healthier food environments, quasiregulatory approaches might achieve progress. A four step accountability framework (take the account, share the account, hold to account, and respond to the account) is proposed. The framework identifies multiple levers for change, including quasiregulatory and other approaches that involve government-specified and government-monitored progress of private sector performance, government procurement mechanisms, improved transparency, monitoring of actions, and management of conflicts of interest. Strengthened accountability systems would support government leadership and stewardship, constrain the influence of private sector actors with major conflicts of interest on public policy development, and reinforce the engagement of civil society in creating demand for healthy food environments and in monitoring progress towards obesity action objectives. Copyright © 2015 Elsevier Ltd. All rights reserved.

Astaxanthin Inhibits JAK/STAT-3 Signaling to Abrogate Cell Proliferation, Invasion and Angiogenesis in a Hamster Model of Oral Cancer

PubMed Central

Kowshik, J.; Baba, Abdul Basit; Giri, Hemant; Deepak Reddy, G.; Dixit, Madhulika; Nagini, Siddavaram

2014-01-01

Identifying agents that inhibit STAT-3, a cytosolic transcription factor involved in the activation of various genes implicated in tumour progression is a promising strategy for cancer chemoprevention. In the present study, we investigated the effect of dietary astaxanthin on JAK-2/STAT-3 signaling in the 7,12-dimethylbenz[a]anthracene (DMBA)-induced hamster buccal pouch (HBP) carcinogenesis model by examining the mRNA and protein expression of JAK/STAT-3 and its target genes. Quantitative RT-PCR, immunoblotting and immunohistochemical analyses revealed that astaxanthin supplementation inhibits key events in JAK/STAT signaling especially STAT-3 phosphorylation and subsequent nuclear translocation of STAT-3. Furthermore, astaxanthin downregulated the expression of STAT-3 target genes involved in cell proliferation, invasion and angiogenesis, and reduced microvascular density, thereby preventing tumour progression. Molecular docking analysis confirmed inhibitory effects of astaxanthin on STAT signaling and angiogenesis. Cell culture experiments with the endothelial cell line ECV304 substantiated the role of astaxanthin in suppressing angiogenesis. Taken together, our data provide substantial evidence that dietary astaxanthin prevents the development and progression of HBP carcinomas through the inhibition of JAK-2/STAT-3 signaling and its downstream events. Thus, astaxanthin that functions as a potent inhibitor of tumour development and progression by targeting JAK/STAT signaling may be an ideal candidate for cancer chemoprevention. PMID:25296162

Evolution of the global use of unsafe medical injections, 2000-2010.

PubMed

Pépin, Jacques; Abou Chakra, Claire Nour; Pépin, Eric; Nault, Vincent

2013-01-01

Since 1999, substantial efforts have been made by the international community to reduce the risks associated with unsafe injections, through ministries of health, international donors, the World Health Organization and the Safe Injection Global Network. The present study attempted to measure the progress, or lack thereof, made over the 2000-2010 decade in reducing unsafe injections in ten regions of the world corresponding to developing and transitional economies. Data about the number of injections per person per year and the proportion of re-use of syringes and needles were obtained for 2010, mainly from population surveys, and compared with previous estimates for 2000 which had used various sources of information including injection safety assessments, population surveys and published studies on injection practices. From 2000 to 2010, in developing countries and transitional economies, the average number of injections per person per year decreased from 3.40 to 2.88, while the proportion of re-use of injection devices dropped from 39.8% to 5.5%. Combining both factors the number of unsafe injections per person per year decreased from 1.35 to 0.16. Even if substantial progress has been made, the Eastern Mediterranean region remains problematic, with 0.57 unsafe injections per person per year. In sub-Saharan Africa and Latin America, people now receive on average only 0.04-0.05 unsafe injections per year. Substantial progress has been made in reducing the number of unsafe injections in developing countries and transitional economies, essentially through a reduction in the re-use of injection devices. In some regions, elimination of unsafe injections might become a reasonable goal.

Design and fabrication of the progressive addition lenses

NASA Astrophysics Data System (ADS)

Qin, Linling; Qian, Lin; Yu, Jingchi

2011-11-01

The use of progressive addition lenses (PALs) for the correction of presbyopia has increased dramatically in recent years. These lenses are now being used as the preferred alternative to bifocal and trifocal lenses in many parts of the world. Progressive addition lenses are a kind of opthalmic lenses with freeform surface. The surface curvature of the Progressive addition lenses varies gradually from a minimum value in the upper area, to a maximum value in the lower area. Thus a PAL has a surface with three zones which have very small astigmatism: far-view zone, near-view zone, and intermediate zone. The far view zone and near view zone have relatively constant powers and connected by the intermediate zone with power varies progressively. The design and fabrication technologies of progressive addition lenses have fast progresses because of the massive development of the optical simulation software, multi-axis ultraprecision machining technologies and CNC machining technologies. The design principles of progressive addition lenses are discussed in a historic review. Several kinds of design methods are illustrated, and their advantages and disadvantages are also represented. In the current study, it is shown that the optical characteristics of the different progressive addition lenses designs are significantly different from one another. The different fabrication technologies of Progressive addition lenses are also discussed in the paper. Plastic injection molding and precision-machine turning are the common fabrication technologies for exterior PALs and Interior PALs respectively.

Sequential Progressions in a Theory of Mind Scale: Longitudinal Perspectives

PubMed Central

Wellman, Henry M.; Fuxi, Fang; Peterson, Candida C.

2011-01-01

Consecutive re-testings of 92 U.S. preschoolers (n = 30), Chinese preschoolers (n = 31), and deaf children (n = 31) examined whether the sequences of development apparent in cross-sectional results with a theory-of-mind scale also appeared in longitudinal assessment. Longitudinal data confirmed that theory-of-mind progressions apparent in cross-sectional scaling data also characterized longitudinal sequences of understanding for individual children. The match between cross-sectional and longitudinal sequences appeared for children who exhibit different progressions across cultures (U.S. vs. China) and for children with substantial delays (deaf children of hearing parents). Moreover, greater scale distances reflected larger longitudinal age differences. PMID:21428982

Report: Fiscal Year 2006 Federal Information Security Management Act Report Status of EPA’s Computer Security Program

EPA Pesticide Factsheets

Report #2006-S-00008, September 25, 2006. Although the Agency has made substantial progress to improve its security program, the OIG identified weaknesses in the Agency’s incident reporting practices.

FY2014 National Clean Diesel Funding Assistance (Diesel Emissions Reduction Act) Programmatic Terms and Conditions

EPA Pesticide Factsheets

EPA will provide substantial involvement in the form of technical assistance, development ofoutputs, and oversight. EPA and the recipient in program content, review of project progress, and quantification and reporting of results.

AIRS-Light Instrument Concept and Critical Technology Development

NASA Technical Reports Server (NTRS)

Maschhoff, Kevin

2001-01-01

Understanding Earth's climate, atmospheric transport mechanisms, and the hydrologic cycle requires a precise knowledge of global atmospheric circulation, temperature profiles, and water vapor distribution. The accuracy of advanced sounders such as AIRS/AMSU/HSB on NASA's Aqua spacecraft can match radiosonde accuracy. It is essential to fold those capabilities fully into the NPOESS, enabling soundings of radiosonde accuracy, every 6 hours around the globe on an operational basis. However, the size, mass, power demands, and thermal characteristics of the Aqua sounding instrument suite cannot be accommodated on the NPOESS spacecraft. AIRS-Light is an instrument concept, developed under the Instrument Incubator Program, which provides IR sounding performance identical to the AIRS instrument, but uses advances in HgCdTe FPA technology and pulse tube cooler technology, as well as design changes to dramatically reduce the size, mass, and power demand, allowing AIRS-Light to meet all NPOESS spacecraft interface requirements. The instrument concept includes substantial re-use of AIRS component designs, including the complex AIRS FPA, to reduce development risk and cost. The AIRS-Light Instrument Incubator program fostered the development of photovoltaic-mode HgCdTe detector array technology for the 13.5-15.4 micron band covered by photoconductive-mode HgCdTe arrays in AIRS, achieved state of the art results in this band, and substantially reduced the development risk for this last new technology needed for AIRS-Light implementation, A demonstration of a prototype 14.5-15.4 micron band IRFPA in a reduced heat-load dewar together with the IMAS pulse tube cryocooler is in progress.

Integration of bioinformatics into an undergraduate biology curriculum and the impact on development of mathematical skills.

PubMed

Wightman, Bruce; Hark, Amy T

2012-01-01

The development of fields such as bioinformatics and genomics has created new challenges and opportunities for undergraduate biology curricula. Students preparing for careers in science, technology, and medicine need more intensive study of bioinformatics and more sophisticated training in the mathematics on which this field is based. In this study, we deliberately integrated bioinformatics instruction at multiple course levels into an existing biology curriculum. Students in an introductory biology course, intermediate lab courses, and advanced project-oriented courses all participated in new course components designed to sequentially introduce bioinformatics skills and knowledge, as well as computational approaches that are common to many bioinformatics applications. In each course, bioinformatics learning was embedded in an existing disciplinary instructional sequence, as opposed to having a single course where all bioinformatics learning occurs. We designed direct and indirect assessment tools to follow student progress through the course sequence. Our data show significant gains in both student confidence and ability in bioinformatics during individual courses and as course level increases. Despite evidence of substantial student learning in both bioinformatics and mathematics, students were skeptical about the link between learning bioinformatics and learning mathematics. While our approach resulted in substantial learning gains, student "buy-in" and engagement might be better in longer project-based activities that demand application of skills to research problems. Nevertheless, in situations where a concentrated focus on project-oriented bioinformatics is not possible or desirable, our approach of integrating multiple smaller components into an existing curriculum provides an alternative. Copyright © 2012 Wiley Periodicals, Inc.

Comparison of some optimal control methods for the design of turbine blades

NASA Technical Reports Server (NTRS)

Desilva, B. M. E.; Grant, G. N. C.

1977-01-01

This paper attempts a comparative study of some numerical methods for the optimal control design of turbine blades whose vibration characteristics are approximated by Timoshenko beam idealizations with shear and incorporating simple boundary conditions. The blade was synthesized using the following methods: (1) conjugate gradient minimization of the system Hamiltonian in function space incorporating penalty function transformations, (2) projection operator methods in a function space which includes the frequencies of vibration and the control function, (3) epsilon-technique penalty function transformation resulting in a highly nonlinear programming problem, (4) finite difference discretization of the state equations again resulting in a nonlinear program, (5) second variation methods with complex state differential equations to include damping effects resulting in systems of inhomogeneous matrix Riccatti equations some of which are stiff, (6) quasi-linear methods based on iterative linearization of the state and adjoint equation. The paper includes a discussion of some substantial computational difficulties encountered in the implementation of these techniques together with a resume of work presently in progress using a differential dynamic programming approach.

Ares I First Stage Propulsion System Status

NASA Technical Reports Server (NTRS)

Priskos, Alex S.

2010-01-01

With the retirement of the Space Shuttle inevitable, the US is faced with the need to loft a reliable cost-effective, technologically viable solution to bring the nation s fleet of spacecraft back up to industry standard. It must not only support the International Space Station (ISS), it must also be capable of supporting human exploration beyond low Earth orbit (LEO). NASA created the Constellation Program to develop a new fleet including the launch vehicles, the spacecraft, and the mission architecture to meet those objectives. The Ares First Stage Team is tasked with developing a propulsion system capable of safely, dependably and repeatedly lofting that new fleet. To minimize technical risks and development costs, the Solid Rocket Boosters (SRBs) of Shuttle were used as a starting point in the design and production of a new first stage element. While the first stage will provide the foundation, the structural backbone, power, and control for launch, the new propulsive element will also provide a greater total impulse to loft a safer, more powerful, fleet of space flight vehicles. Substantial design and system upgrades were required to meet the mass and trajectory requisites of the new fleet. Noteworthy innovations and design features include new forward structures, new propellant grain geometry, a new internal insulation system, and a state-of-the art avionics system. Additional advances were in materials and composite structures development, case bond liners, and thermal protection systems. Significant progress has been made in the design, development and testing of the propulsion and avionics systems for the new first stage element. Challenges, such as those anticipated with thrust oscillation, have been better characterized, and are being effectively mitigated. The test firing of the first development motor (DM-1) was a success that validated much of the engineering development to date. Substantive data has been collected and analyzed, allowing the Ares First Stage team to move forward, fine-tune the design, and advance to production of the second development motor (DM-2), which is now in fabrication. This paper will provide an overview of the design, development, challenges, and progress on the production of the new Ares First Stage propulsion system

Exploring the experiences and coping strategies of international medical students

PubMed Central

2011-01-01

Background Few studies have addressed the challenges that international medical students face and there is a dearth of information on the behavioural strategies these students adopt to successfully progress through their academic program in the face of substantial difficulties of language barrier, curriculum overload, financial constraints and assessment tasks that require high proficiency in communication skills. Methods This study was designed primarily with the aim of enhancing understanding of the coping strategies, skill perceptions and knowledge of assessment expectations of international students as they progress through the third and fourth years of their medical degree at the School of Medicine, University of Tasmania, Australia. Results Survey, focus group discussion and individual interviews revealed that language barriers, communication skills, cultural differences, financial burdens, heavy workloads and discriminatory bottlenecks were key factors that hindered their adaptation to the Australian culture. Quantitative analyses of their examination results showed that there were highly significant (p < 0.001) variations between student performances in multiple choice questions, short answer questions and objective structured clinical examinations (70.3%, 49.7% & 61.7% respectively), indicating existence of communication issues. Conclusions Despite the challenges, these students have adopted commendable coping strategies and progressed through the course largely due to their high sense of responsibility towards their family, their focus on the goal of graduating as medical doctors and their support networks. It was concluded that faculty needs to provide both academic and moral support to their international medical students at three major intervention points, namely point of entry, mid way through the course and at the end of the course to enhance their coping skills and academic progression. Finally, appropriate recommendations were made. PMID:21702988

Are we on course for reporting on the Millennium Development Goals in 2015?

PubMed

Rugg, Deborah; Marais, Hein; Carael, Michel; De Lay, Paul; Warner-Smith, Matthew

2009-12-01

At the 2001 United Nations General Assembly Special Session on HIV/AIDS (UNGASS), Member States agreed to regularly review progress made in national responses to HIV. This article provides (1) a brief overview of how the resultant global UNGASS reporting system was developed; (2) the origins, background, limitations and potential of that system; (3) an overview of the articles in this supplement; and (4) crosscutting institutional and methodological issues. United Nations Member States biennially provide The Joint United Nations Programme on HIV/AIDS (UNAIDS) with data on 25 core indicators of national responses to HIV, collected in Country Progress Reports. This article critically reviews and interprets these data in light of international political considerations and overall data needs. There has been a considerable improvement in response rates, accompanied by an increase in data quality and completeness. Both nationally and internationally, the UNGASS process is viewed as being more substantial and important than a reporting exercise to the United Nations General Assembly. The process has catalyzed the development of national monitoring systems and has created opportunities for civil society to monitor and challenge government commitments and deeds. Although the UNGASS global reporting system now comprises an unequaled wealth of data on HIV responses, collected from a broad range of countries, it cannot yet answer several critical questions about the progress and effectiveness of those responses. Evaluation studies that go beyond indicator monitoring are needed, but they will take time to design, fund, implement and interpret. In the meantime, this global monitoring system provides a good indication of the overall progress in the global response to HIV and whether Millennium Development Goal (MDG) 6 (to halt and reverse the HIV epidemic) is likely to be reached by 2015.

Methods of Genomic Competency Integration in Practice

PubMed Central

Jenkins, Jean; Calzone, Kathleen A.; Caskey, Sarah; Culp, Stacey; Weiner, Marsha; Badzek, Laurie

2015-01-01

Purpose Genomics is increasingly relevant to health care, necessitating support for nurses to incorporate genomic competencies into practice. The primary aim of this project was to develop, implement, and evaluate a year-long genomic education intervention that trained, supported, and supervised institutional administrator and educator champion dyads to increase nursing capacity to integrate genomics through assessments of program satisfaction and institutional achieved outcomes. Design Longitudinal study of 23 Magnet Recognition Program® Hospitals (21 intervention, 2 controls) participating in a 1-year new competency integration effort aimed at increasing genomic nursing competency and overcoming barriers to genomics integration in practice. Methods Champion dyads underwent genomic training consisting of one in-person kick-off training meeting followed by monthly education webinars. Champion dyads designed institution-specific action plans detailing objectives, methods or strategies used to engage and educate nursing staff, timeline for implementation, and outcomes achieved. Action plans focused on a minimum of seven genomic priority areas: champion dyad personal development; practice assessment; policy content assessment; staff knowledge needs assessment; staff development; plans for integration; and anticipated obstacles and challenges. Action plans were updated quarterly, outlining progress made as well as inclusion of new methods or strategies. Progress was validated through virtual site visits with the champion dyads and chief nursing officers. Descriptive data were collected on all strategies or methods utilized, and timeline for achievement. Descriptive data were analyzed using content analysis. Findings The complexity of the competency content and the uniqueness of social systems and infrastructure resulted in a significant variation of champion dyad interventions. Conclusions Nursing champions can facilitate change in genomic nursing capacity through varied strategies but require substantial training in order to design and implement interventions. Clinical Relevance Genomics is critical to the practice of all nurses. There is a great opportunity and interest to address genomic knowledge deficits in the practicing nurse workforce as a strategy to improve patient outcomes. Exemplars of champion dyad interventions designed to increase nursing capacity focus on improving education, policy, and healthcare services. PMID:25808828

Progression of initially mild hepatic fibrosis in patients with chronic hepatitis C infection.

PubMed

Williams, M J; Lang-Lenton, M

2011-01-01

A significant number of patients with chronic hepatitis C infection have minimal fibrosis at presentation. Although the short-term outlook for such patients is good, there are limited data available on long-term progression. We assessed the risk of fibrosis progression in 282 patients with chronic hepatitis C with Ishak stage 0 or 1 fibrosis on initial liver biopsy. Progression of fibrosis stage occurred in 118 patients (42%) over a median interval of 52.5 months. Thirteen (5%) progressed to severe (Ishak stage 4 or more) fibrosis. Progression was significantly associated with both age at initial biopsy [odds ratio (OR) for progression of 1.31 per 10 year increase in age] and median alanine transaminase (ALT) levels during follow-up (OR of 1.06 per 10 IU/L increase). There was no significant association with gender, histological inflammatory grade, hepatic steatosis or body mass index. We conclude that hepatitis C with initially mild fibrosis does progress in a substantial proportion of patients and should not be viewed as a benign disease. Early antiviral therapy should be considered in older patients and those with high ALT levels.

Hypothesis: spring-loaded boomerang mechanism of influenza hemagglutinin-mediated membrane fusion.

PubMed

Tamm, Lukas K

2003-07-11

Substantial progress has been made in recent years to augment the current understanding of structures and interactions that promote viral membrane fusion. This progress is reviewed with a particular emphasis on recently determined structures of viral fusion domains and their interactions with lipid membranes. The results from the different structural and thermodynamic experimental approaches are synthesized into a new proposed mechanism, termed the "spring-loaded boomerang" mechanism of membrane fusion, which is presented here as a hypothesis.

The World Spatiotemporal Analytics and Mapping Project (WSTAMP): Further Progress in Discovering, Exploring, and Mapping Spatiotemporal Patterns Across the World's Largest Open Source Data Sets

NASA Astrophysics Data System (ADS)

Piburn, J.; Stewart, R.; Myers, A.; Sorokine, A.; Axley, E.; Anderson, D.; Burdette, J.; Biddle, C.; Hohl, A.; Eberle, R.; Kaufman, J.; Morton, A.

2017-10-01

Spatiotemporal (ST) analytics applied to major data sources such as the World Bank and World Health Organization has shown tremendous value in shedding light on the evolution of cultural, health, economic, and geopolitical landscapes on a global level. WSTAMP engages this opportunity by situating analysts, data, and analytics together within a visually rich and computationally rigorous online analysis environment. Since introducing WSTAMP at the First International Workshop on Spatiotemporal Computing, several transformative advances have occurred. Collaboration with human computer interaction experts led to a complete interface redesign that deeply immerses the analyst within a ST context, significantly increases visual and textual content, provides navigational crosswalks for attribute discovery, substantially reduce mouse and keyboard actions, and supports user data uploads. Secondly, the database has been expanded to include over 16,000 attributes, 50 years of time, and 200+ nation states and redesigned to support non-annual, non-national, city, and interaction data. Finally, two new analytics are implemented for analyzing large portfolios of multi-attribute data and measuring the behavioral stability of regions along different dimensions. These advances required substantial new approaches in design, algorithmic innovations, and increased computational efficiency. We report on these advances and inform how others may freely access the tool.

Hybrid Environmental Control System Integrated Modeling Trade Study Analysis for Commercial Aviation

NASA Astrophysics Data System (ADS)

Parrilla, Javier

Current industry trends demonstrate aircraft electrification will be part of future platforms in order to achieve higher levels of efficiency in various vehicle level sub-systems. However electrification requires a substantial change in aircraft design that is not suitable for re-winged or re-engined applications as some aircraft manufacturers are opting for today. Thermal limits arise as engine cores progressively get smaller and hotter to improve overall engine efficiency, while legacy systems still demand a substantial amount of pneumatic, hydraulic and electric power extraction. The environmental control system (ECS) provides pressurization, ventilation and air conditioning in commercial aircraft, making it the main heat sink for all aircraft loads with exception of the engine. To mitigate the architecture thermal limits in an efficient manner, the form in which the ECS interacts with the engine will have to be enhanced as to reduce the overall energy consumed and achieve an energy optimized solution. This study examines a tradeoff analysis of an electric ECS by use of a fully integrated Numerical Propulsion Simulation System (NPSS) model that is capable of studying the interaction between the ECS and the engine cycle deck. It was found that a peak solution lays in a hybrid ECS where it utilizes the correct balance between a traditional pneumatic and a fully electric system. This intermediate architecture offers a substantial improvement in aircraft fuel consumptions due to a reduced amount of waste heat and customer bleed in exchange for partial electrification of the air-conditions pack which is a viable option for re-winged applications.

FY2014 National Clean Diesel Funding Assistance (Diesel Emissions Reduction Act) Programmatic Terms and Conditions

EPA Pesticide Factsheets

Substantial federal involvement will take the form of monitoring the project by EPA, participation and collaboration between EPA and the recipient in program content, review of project progress, and quantification and reporting ofresults.

Fifteen years of sector-wide approach (SWAp) in Bangladesh health sector: an assessment of progress.

PubMed

Ahsan, Karar Zunaid; Streatfield, Peter Kim; Ijdi, Rashida-E-; Escudero, Gabriela Maria; Khan, Abdul Waheed; Reza, M M

2016-06-01

The Ministry of Health and Family Welfare (MOHFW) of the Government of Bangladesh embarked on a sector-wide approach (SWAp) modality for the health, nutrition and population (HNP) sector in 1998. This programmatic shift initiated a different set of planning disciplines and practices along with institutional changes in the MOHFW. Over the years, the SWAp modality has evolved in Bangladesh as the MOHFW has learnt from its implementation and refined the program design. This article explores the progress made, both in terms of achievement of health outcomes and systems strengthening results, since the implementation of the SWAp for Bangladesh's health sector. Secondary analyses of survey data from 1993 to 2011 as well as a literature review of published and grey literature on health SWAp in Bangladesh was conducted for this assessment. Results of the assessment indicate that the MOHFW made substantial progress in health outcomes and health systems strengthening. SWAps facilitated the alignment of funding and technical support around national priorities, and improved the government's role in program design as well as in implementation and development partner coordination. Notable systemic improvements have taken place in the country systems with regards to monitoring and evaluation, procurement and service provision, which have improved functionality of health facilities to provide essential care. Implementation of the SWAp has, therefore, contributed to an accelerated improvement in key health outcomes in Bangladesh over the last 15 years. The health SWAp in Bangladesh offers an example of a successful adaptation of such an approach in a complex administrative structure. Based on the lessons learned from SWAp implementation in Bangladesh, the MOHFW needs to play a stronger stewardship and regulatory role to reap the full benefits of a SWAp in its subsequent programming. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

HIV policy and implementation: a national policy review and an implementation case study of a rural area of northern Malawi.

PubMed

Dasgupta, Aisha N Z; Wringe, Alison; Crampin, Amelia C; Chisambo, Christina; Koole, Olivier; Makombe, Simon; Sungani, Charles; Todd, Jim; Church, Kathryn

2016-09-01

Malawi is a global leader in the design and implementation of progressive HIV policies. However, there continues to be substantial attrition of people living with HIV across the "cascade" of HIV services from diagnosis to treatment, and program outcomes could improve further. Ability to successfully implement national HIV policy, especially in rural areas, may have an impact on consistency of service uptake. We reviewed Malawian policies and guidelines published between 2003 and 2013 relating to accessibility of adult HIV testing, prevention of mother-to-child transmission and HIV care and treatment services using a policy extraction tool, with gaps completed through key informant interviews. A health facility survey was conducted in six facilities serving the population of a demographic surveillance site in rural northern Malawi to investigate service-level policy implementation. Survey data were analyzed using descriptive statistics. Policy implementation was assessed by comparing policy content and facility practice using pre-defined indicators covering service access: quality of care, service coordination and patient tracking, patient support, and medical management. ART was rolled out in Malawi in 2004 and became available in the study area in 2005. In most areas, practices in the surveyed health facilities complied with or exceeded national policy, including those designed to promote rapid initiation onto treatment, such as free services and task-shifting for treatment initiation. However, policy and/or practice were/was lacking in certain areas, in particular those strategies to promote retention in HIV care (e.g., adherence monitoring and home-based care). In some instances, though, facilities implemented alternative progressive practices aimed at improving quality of care and encouraging adherence. While Malawi has formulated a range of progressive policies aiming to promote rapid initiation onto ART, increased investment in policy implementation strategies and quality service delivery, in particular to promote long-term retention on treatment may improve outcomes further.

Chemogenetic locus coeruleus activation restores reversal learning in a rat model of Alzheimer's disease.

PubMed

Rorabaugh, Jacki M; Chalermpalanupap, Termpanit; Botz-Zapp, Christian A; Fu, Vanessa M; Lembeck, Natalie A; Cohen, Robert M; Weinshenker, David

2017-11-01

See Grinberg and Heinsen (doi:10.1093/brain/awx261) for a scientific commentary on this article. Clinical evidence suggests that aberrant tau accumulation in the locus coeruleus and noradrenergic dysfunction may be a critical early step in Alzheimer’s disease progression. Yet, an accurate preclinical model of these phenotypes that includes early pretangle tau accrual in the locus coeruleus, loss of locus coeruleus innervation and deficits locus coeruleus/norepinephrine modulated behaviours, does not exist, hampering the identification of underlying mechanisms and the development of locus coeruleus-based therapies. Here, a transgenic rat (TgF344-AD) expressing disease-causing mutant amyloid precursor protein (APPsw) and presenilin-1 (PS1ΔE9) was characterized for histological and behavioural signs of locus coeruleus dysfunction reminiscent of mild cognitive impairment/early Alzheimer’s disease. In TgF344-AD rats, hyperphosphorylated tau was detected in the locus coeruleus prior to accrual in the medial entorhinal cortex or hippocampus, and tau pathology in the locus coeruleus was negatively correlated with noradrenergic innervation in the medial entorhinal cortex. Likewise, TgF344-AD rats displayed progressive loss of hippocampal norepinephrine levels and locus coeruleus fibres in the medial entorhinal cortex and dentate gyrus, with no frank noradrenergic cell body loss. Cultured mouse locus coeruleus neurons expressing hyperphosphorylation-prone mutant human tau had shorter neurites than control neurons, but similar cell viability, suggesting a causal link between pretangle tau accrual and altered locus coeruleus fibre morphology. TgF344-AD rats had impaired reversal learning in the Morris water maze compared to their wild-type littermates, which was rescued by chemogenetic locus coeruleus activation via designer receptors exclusively activated by designer drugs (DREADDs). Our results indicate that TgF344-AD rats uniquely meet several key criteria for a suitable model of locus coeruleus pathology and dysfunction early in Alzheimer’s disease progression, and suggest that a substantial window of opportunity for locus coeruleus/ norepinephrine-based therapeutics exists.

The case for the relativistic hot big bang cosmology

NASA Technical Reports Server (NTRS)

Peebles, P. J. E.; Schramm, D. N.; Kron, R. G.; Turner, E. L.

1991-01-01

What has become the standard model in cosmology is described, and some highlights are presented of the now substantial range of evidence that most cosmologists believe convincingly establishes this model, the relativistic hot big bang cosmology. It is shown that this model has yielded a set of interpretations and successful predictions that substantially outnumber the elements used in devising the theory, with no well-established empirical contradictions. Brief speculations are made on how the open puzzles and work in progress might affect future developments in this field.

Mistreatment in Assisted Living Facilities: Complaints, Substantiations, and Risk Factors

ERIC Educational Resources Information Center

Phillips, Linda R.; Guo, Guifang

2011-01-01

Purpose of the Study: Use archived public data from Arizona to explore relationships among selected institutional and resident risk and situation-specific factors and complaints and substantiated allegations of various types of mistreatment in assisted living facilities (ALFs). Design and Methods: An exploratory/descriptive 2-group design was…

Porcine models of muscular dystrophy

USDA-ARS?s Scientific Manuscript database

Duchenne muscular dystrophy is a progressive, fatal, X-linked disease caused by a failure to accumulate the cytoskeletal protein, dystrophin. This disease is modeled by a variety of animal models including several fish models, mice, rats, and dogs. While these models have contributed substantially t...

Strategies to improve water productivity in a water-stressed future

USDA-ARS?s Scientific Manuscript database

In the fiscal years 2011 through 2014, ARS scientists and engineers made substantial progress in addressing research problems related to improving water productivity and creating new knowledge, products and outcomes to improve American agricultural production, efficiency of resource use, safety and ...

34 CFR 380.20 - What requirements must a grantee meet before it provides for the transition of an individual in...

Code of Federal Regulations, 2011 CFR

2011-07-01

... EMPLOYMENT SERVICES TO INDIVIDUALS WITH THE MOST SEVERE DISABILITIES AND TECHNICAL ASSISTANCE PROJECTS What... individual's program of services, and only if the individual has made substantial progress toward meeting his...

78 FR 16908 - Determinations Under the African Growth and Opportunity Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... STATES TRADE REPRESENTATIVE Determinations Under the African Growth and Opportunity Act AGENCY... substantial progress toward implementing and following, the customs procedures required by the African Growth... lesser developed beneficiary sub-Saharan African country. In Proclamation 7350 (October 2, 2000), the...

A systematic review of US rangeland social science

USDA-ARS?s Scientific Manuscript database

Rangeland science aims to create knowledge to sustain rangeland social-ecological systems over the long term. Range science has made substantial progress on understanding ecological dynamics of rangeland systems and the management practices that sustain them, and these findings have been systematica...

77 FR 26604 - Progressive Rail, Incorporated-Lease and Operation Exemption-Rail Line of Union Pacific Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... contains an interchange commitment with substantial economic rewards for PGR if it interchanges with UP. One has to wonder why such an economic incentive is necessary if there is little chance that PGR would...

Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring.

PubMed

Jang, Kyung-In; Han, Sang Youn; Xu, Sheng; Mathewson, Kyle E; Zhang, Yihui; Jeong, Jae-Woong; Kim, Gwang-Tae; Webb, R Chad; Lee, Jung Woo; Dawidczyk, Thomas J; Kim, Rak Hwan; Song, Young Min; Yeo, Woon-Hong; Kim, Stanley; Cheng, Huanyu; Rhee, Sang Il; Chung, Jeahoon; Kim, Byunggik; Chung, Ha Uk; Lee, Dongjun; Yang, Yiyuan; Cho, Moongee; Gaspar, John G; Carbonari, Ronald; Fabiani, Monica; Gratton, Gabriele; Huang, Yonggang; Rogers, John A

2014-09-03

Research in stretchable electronics involves fundamental scientific topics relevant to applications with importance in human healthcare. Despite significant progress in active components, routes to mechanically robust construction are lacking. Here, we introduce materials and composite designs for thin, breathable, soft electronics that can adhere strongly to the skin, with the ability to be applied and removed hundreds of times without damaging the devices or the skin, even in regions with substantial topography and coverage of hair. The approach combines thin, ultralow modulus, cellular silicone materials with elastic, strain-limiting fabrics, to yield a compliant but rugged platform for stretchable electronics. Theoretical and experimental studies highlight the mechanics of adhesion and elastic deformation. Demonstrations include cutaneous optical, electrical and radio frequency sensors for measuring hydration state, electrophysiological activity, pulse and cerebral oximetry. Multipoint monitoring of a subject in an advanced driving simulator provides a practical example.

Understanding the C-pulse device and its potential to treat heart failure.

PubMed

Sales, Virna L; McCarthy, Patrick M

2010-03-01

The Sunshine Heart C-Pulse (C-Pulse; Sunshine Heart Inc., Tustin, CA) device is an extra-aortic implantable counterpulsation pump designed as a non-blood contacting ambulatory heart assist device, which may provide relief from symptoms for class II-III congestive heart failure patients. It has a comparable hemodynamic augmentation to intra-aortic balloon counterpulsation devices. The C-Pulse cuff is implanted through a median sternotomy, secured around the ascending aorta, and pneumatically driven by an external system controller. Pre-clinical studies in the acute pig model, and initial temporary clinical studies in patients undergoing off-pump coronary bypass surgery have shown substantial increase in diastolic perfusion of the coronary vessels, which translated to a favorable improvement in ventricular function. A U.S. prospective multi-center trial to evaluate the safety and efficacy of the C-Pulse in class III patients with moderate heart failure is now in progress.

Effective Team Support: From Modeling to Software Agents

NASA Technical Reports Server (NTRS)

Remington, Roger W. (Technical Monitor); John, Bonnie; Sycara, Katia

2003-01-01

The purpose of this research contract was to perform multidisciplinary research between CMU psychologists, computer scientists and engineers and NASA researchers to design a next generation collaborative system to support a team of human experts and intelligent agents. To achieve robust performance enhancement of such a system, we had proposed to perform task and cognitive modeling to thoroughly understand the impact technology makes on the organization and on key individual personnel. Guided by cognitively-inspired requirements, we would then develop software agents that support the human team in decision making, information filtering, information distribution and integration to enhance team situational awareness. During the period covered by this final report, we made substantial progress in modeling infrastructure and task infrastructure. Work is continuing under a different contract to complete empirical data collection, cognitive modeling, and the building of software agents to support the teams task.

Writing-to-learn in undergraduate science education: a community-based, conceptually driven approach.

PubMed

Reynolds, Julie A; Thaiss, Christopher; Katkin, Wendy; Thompson, Robert J

2012-01-01

Despite substantial evidence that writing can be an effective tool to promote student learning and engagement, writing-to-learn (WTL) practices are still not widely implemented in science, technology, engineering, and mathematics (STEM) disciplines, particularly at research universities. Two major deterrents to progress are the lack of a community of science faculty committed to undertaking and applying the necessary pedagogical research, and the absence of a conceptual framework to systematically guide study designs and integrate findings. To address these issues, we undertook an initiative, supported by the National Science Foundation and sponsored by the Reinvention Center, to build a community of WTL/STEM educators who would undertake a heuristic review of the literature and formulate a conceptual framework. In addition to generating a searchable database of empirically validated and promising WTL practices, our work lays the foundation for multi-university empirical studies of the effectiveness of WTL practices in advancing student learning and engagement.

Chromatin insulator elements: establishing barriers to set heterochromatin boundaries.

PubMed

Barkess, Gráinne; West, Adam G

2012-02-01

Epigenomic profiling has revealed that substantial portions of genomes in higher eukaryotes are organized into extensive domains of transcriptionally repressive chromatin. The boundaries of repressive chromatin domains can be fixed by DNA elements known as barrier insulators, to both shield neighboring gene expression and to maintain the integrity of chromosomal silencing. Here, we examine the current progress in identifying vertebrate barrier elements and their binding factors. We overview the design of the reporter assays used to define enhancer-blocking and barrier insulators. We look at the mechanisms vertebrate barrier proteins, such as USF1 and VEZF1, employ to counteract Polycomb- and heterochromatin-associated repression. We also undertake a critical analysis of whether CTCF could also act as a barrier protein. There is good evidence that barrier elements in vertebrates can form repressive chromatin domain boundaries. Future studies will determine whether barriers are frequently used to define repressive domain boundaries in vertebrates.

Bioresorbable Scaffolds: Current Evidences in the Treatment of Coronary Artery Disease

PubMed Central

2016-01-01

Percutaneous coronary revascularization strategies have gradually progressed over a period of last few decades. The advent of newer generation drug-eluting stents has significantly improved the outcomes of Percutaneous Coronary Intervention (PCI) by substantially reducing in-stent restenosis and stent thrombosis. However, vascular inflammation, restenosis, thrombosis, and neoatherosclerosis due to the permanent presence of a metallic foreign body within the artery limit their usage in complex Coronary Artery Disease (CAD). Bioresorbable Scaffolds (BRS) represent a novel approach in coronary stent technology. Complete resorption of the scaffold liberates the treated vessel from its cage and restores pulsatility, cyclical strain, physiological shear stress, and mechanotransduction. In this review article, we describe the advances in this rapidly evolving technology, present the evidence from the pre-clinical and clinical evaluation of these devices, and provide an overview of the ongoing clinical trials that were designed to examine the effectiveness of BRS in the clinical setting. PMID:27891384

Assembly of photo-bioelectrochemical cells using photosystem I-functionalized electrodes

NASA Astrophysics Data System (ADS)

Efrati, Ariel; Lu, Chun-Hua; Michaeli, Dorit; Nechushtai, Rachel; Alsaoub, Sabine; Schuhmann, Wolfgang; Willner, Itamar

2016-02-01

The design of photo-bioelectrochemical cells based on native photosynthetic reaction centres is attracting substantial recent interest as a means for the conversion of solar light energy into electrical power. In the natural photosynthetic apparatus, the photosynthetic reaction centres are coupled to biocatalytic transformations leading to CO2 fixation and O2 evolution. Although significant progress in the integration of native photosystems with electrodes for light-to-electrical energy conversion has been achieved, the conjugation of the photosystems to enzymes to yield photo-bioelectrocatalytic solar cells remains a challenge. Here we demonstrate the assembly of integrated photosystem I/glucose oxidase or glucose dehydrogenase photo-bioelectrochemical electrodes. We highlight the photonic wiring of the biocatalysts by means of photosystem I using glucose as fuel. Our results provide a general approach to assemble photo-bioelectrochemical solar cells with wide implications for solar energy conversion, bioelectrocatalysis and sensing.

Vaccines to Accelerate Malaria Elimination and Eventual Eradication.

PubMed

Healer, Julie; Cowman, Alan F; Kaslow, David C; Birkett, Ashley J

2017-09-01

Remarkable progress has been made in coordinated malaria control efforts with substantial reductions in malaria-associated deaths and morbidity achieved through mass administration of drugs and vector control measures including distribution of long-lasting insecticide-impregnated bednets and indoor residual spraying. However, emerging resistance poses a significant threat to the sustainability of these interventions. In this light, the malaria research community has been charged with the development of a highly efficacious vaccine to complement existing malaria elimination measures. As the past 40 years of investment in this goal attests, this is no small feat. The malaria parasite is a highly complex organism, exquisitely adapted for survival under hostile conditions within human and mosquito hosts. Here we review current vaccine strategies to accelerate elimination and the potential for novel and innovative approaches to vaccine design through a better understanding of the host-parasite interaction. Copyright © 2017 Cold Spring Harbor Laboratory Press; all rights reserved.

Integrated function nonimaging concentrating collector tubes for solar thermal energy

NASA Astrophysics Data System (ADS)

Winston, R.; Ogallagher, J. J.

1982-09-01

A substantial improvement in optical efficiency over contemporary external reflector evacuated tube collectors has been achieved by integrating the reflector surface into the outer glass envelope. Described are the design fabrication and test results for a prototype collector based on this concept. A comprehensive test program to measure performance and operational characteristics of a 2 sq m panel (45 tubes) has been completed. Efficiencies above 50% relative to beam at 200 C have been repeatedly demonstrated. Both the instantaneous and long term average performance of this totally stationary solar collector are comparable to those for tracking line focus parabolic troughs. The yield, reliability and stability of performance achieved have been excellent. Subcomponent assemblies and fabrication procedures have been used which are expected to be compatible with high volume production. The collector has a wide variety of applications in the 100 to 300 C range including industrial progress heat, air conditioning and Rankine engine operation.

Effective Team Support: From Task and Cognitive Modeling to Software Agents for Time-Critical Complex Work Environments

NASA Technical Reports Server (NTRS)

Remington, Roger W. (Technical Monitor); John, Bonnie E.; Sycara, Katia

2005-01-01

The purpose of this research contract was to perform multidisciplinary research between CMU psychologists, computer scientists and NASA researchers to design a next generation collaborative system to support a team of human experts and intelligent agents. To achieve robust performance enhancement of such a system, we had proposed to perform task and cognitive modeling to thoroughly understand the impact technology makes on the organization and on key individual personnel. Guided by cognitively-inspired requirements, we would then develop software agents that support the human team in decision making, information filtering, information distribution and integration to enhance team situational awareness. During the period covered by this final report, we made substantial progress in completing a system for empirical data collection, cognitive modeling, and the building of software agents to support a team's tasks, and in running experiments for the collection of baseline data.

Benefits of Exercise in Rheumatoid Arthritis

PubMed Central

Cooney, Jennifer K.; Law, Rebecca-Jane; Matschke, Verena; Lemmey, Andrew B.; Moore, Jonathan P.; Ahmad, Yasmeen; Jones, Jeremy G.; Maddison, Peter; Thom, Jeanette M.

2011-01-01

This paper aims to highlight the importance of exercise in patients with rheumatoid arthritis (RA) and to demonstrate the multitude of beneficial effects that properly designed exercise training has in this population. RA is a chronic, systemic, autoimmune disease characterised by decrements to joint health including joint pain and inflammation, fatigue, increased incidence and progression of cardiovascular disease, and accelerated loss of muscle mass, that is, “rheumatoid cachexia”. These factors contribute to functional limitation, disability, comorbidities, and reduced quality of life. Exercise training for RA patients has been shown to be efficacious in reversing cachexia and substantially improving function without exacerbating disease activity and is likely to reduce cardiovascular risk. Thus, all RA patients should be encouraged to include aerobic and resistance exercise training as part of routine care. Understanding the perceptions of RA patients and health professionals to exercise is key to patients initiating and adhering to effective exercise training. PMID:21403833

Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring

NASA Astrophysics Data System (ADS)

Jang, Kyung-In; Han, Sang Youn; Xu, Sheng; Mathewson, Kyle E.; Zhang, Yihui; Jeong, Jae-Woong; Kim, Gwang-Tae; Webb, R. Chad; Lee, Jung Woo; Dawidczyk, Thomas J.; Kim, Rak Hwan; Song, Young Min; Yeo, Woon-Hong; Kim, Stanley; Cheng, Huanyu; Rhee, Sang Il; Chung, Jeahoon; Kim, Byunggik; Chung, Ha Uk; Lee, Dongjun; Yang, Yiyuan; Cho, Moongee; Gaspar, John G.; Carbonari, Ronald; Fabiani, Monica; Gratton, Gabriele; Huang, Yonggang; Rogers, John A.

2014-09-01

Research in stretchable electronics involves fundamental scientific topics relevant to applications with importance in human healthcare. Despite significant progress in active components, routes to mechanically robust construction are lacking. Here, we introduce materials and composite designs for thin, breathable, soft electronics that can adhere strongly to the skin, with the ability to be applied and removed hundreds of times without damaging the devices or the skin, even in regions with substantial topography and coverage of hair. The approach combines thin, ultralow modulus, cellular silicone materials with elastic, strain-limiting fabrics, to yield a compliant but rugged platform for stretchable electronics. Theoretical and experimental studies highlight the mechanics of adhesion and elastic deformation. Demonstrations include cutaneous optical, electrical and radio frequency sensors for measuring hydration state, electrophysiological activity, pulse and cerebral oximetry. Multipoint monitoring of a subject in an advanced driving simulator provides a practical example.

Strategies to Maximize the Potential of Marine Biomaterials as a Platform for Cell Therapy

PubMed Central

Kim, Hyeongmin; Lee, Jaehwi

2016-01-01

Marine biopolymers have been explored as a promising cell therapy system for efficient cell delivery and tissue engineering. However, the marine biomaterial-based systems themselves have exhibited limited performance in terms of maintenance of cell viability and functions, promotion of cell proliferation and differentiation as well as cell delivery efficiency. Thus, numerous novel strategies have been devised to improve cell therapy outcomes. The strategies include optimization of physical and biochemical properties, provision of stimuli-responsive functions, and design of platforms for efficient cell delivery and tissue engineering. These approaches have demonstrated substantial improvement of therapeutic outcomes in a variety of research settings. In this review, therefore, research progress made with marine biomaterials as a platform for cell therapy is reported along with current research directions to further advance cell therapies as a tool to cure incurable diseases. PMID:26821034

Composite structural materials

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1982-01-01

The promise of filamentary composite materials, whose development may be considered as entering its second generation, continues to generate intense interest and applications activity. Fiber reinforced composite materials offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been achieved since the initial developments in the mid 1960's. Rather limited applications to primary aircraft structure have been made, however, mainly in a material-substitution mode on military aircraft, except for a few experiments currently underway on large passenger airplanes in commercial operation. To fulfill the promise of composite materials completely requires a strong technology base. NASA and AFOSR recognize the present state of the art to be such that to fully exploit composites in sophisticated aerospace structures, the technology base must be improved. This, in turn, calls for expanding fundamental knowledge and the means by which it can be successfully applied in design and manufacture.

Progress on Complex Langevin simulations of a finite density matrix model for QCD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloch, Jacques; Glesaan, Jonas; Verbaarschot, Jacobus

We study the Stephanov model, which is an RMT model for QCD at finite density, using the Complex Langevin algorithm. Naive implementation of the algorithm shows convergence towards the phase quenched or quenched theory rather than to intended theory with dynamical quarks. A detailed analysis of this issue and a potential resolution of the failure of this algorithm are discussed. We study the effect of gauge cooling on the Dirac eigenvalue distribution and time evolution of the norm for various cooling norms, which were specifically designed to remove the pathologies of the complex Langevin evolution. The cooling is further supplementedmore » with a shifted representation for the random matrices. Unfortunately, none of these modifications generate a substantial improvement on the complex Langevin evolution and the final results still do not agree with the analytical predictions.« less

Low gravity transfer line chilldown

NASA Technical Reports Server (NTRS)

Antar, Basil N.; Collins, Frank G.; Kawaji, Masahiro

1992-01-01

The progress to date is presented in providing predictive capabilities for the transfer line chilldown problem in low gravity environment. A low gravity experimental set up was designed and flown onboard the NASA/KC-135 airplane. Some results of this experimental effort are presented. The cooling liquid for these experiments was liquid nitrogen. The boiling phenomenon was investigated in this case using flow visualization techniques as well as recording wall temperatures. The flow field was established by injecting cold liquid in a heated tube whose temperature was set above saturation values. The tubes were vertically supported with the liquid injected from the lower end of the tube. The results indicate substantial differences in the flow patterns established during boiling between the ground based, (1-g), experiments and the flight experiments, (low-g). These differences in the flow patterns will be discussed and some explanations will be offered.

Engineering plant metabolism into microbes: from systems biology to synthetic biology.

PubMed

Xu, Peng; Bhan, Namita; Koffas, Mattheos A G

2013-04-01

Plant metabolism represents an enormous repository of compounds that are of pharmaceutical and biotechnological importance. Engineering plant metabolism into microbes will provide sustainable solutions to produce pharmaceutical and fuel molecules that could one day replace substantial portions of the current fossil-fuel based economy. Metabolic engineering entails targeted manipulation of biosynthetic pathways to maximize yields of desired products. Recent advances in Systems Biology and the emergence of Synthetic Biology have accelerated our ability to design, construct and optimize cell factories for metabolic engineering applications. Progress in predicting and modeling genome-scale metabolic networks, versatile gene assembly platforms and delicate synthetic pathway optimization strategies has provided us exciting opportunities to exploit the full potential of cell metabolism. In this review, we will discuss how systems and synthetic biology tools can be integrated to create tailor-made cell factories for efficient production of natural products and fuel molecules in microorganisms. Copyright © 2012 Elsevier Ltd. All rights reserved.

Concept and Development of an Electronic Framework Intended for Electrode and Surrounding Environment Characterization In Vivo

PubMed Central

Rieger, Stefan B.; Pfau, Jennifer; Stieglitz, Thomas; Asplund, Maria; Ordonez, Juan S.

2016-01-01

There has been substantial progress over the last decade towards miniaturizing implantable microelectrodes for use in Active Implantable Medical Devices (AIMD). Compared to the rapid development and complexity of electrode miniaturization, methods to monitor and assess functional integrity and electrical functionality of these electrodes, particularly during long term stimulation, have not progressed to the same extent. Evaluation methods that form the gold standard, such as stimulus pulse testing, cyclic voltammetry and electrochemical impedance spectroscopy, are either still bound to laboratory infrastructure (impractical for long term in vivo experiments) or deliver no comprehensive insight into the material’s behaviour. As there is a lack of cost effective and practical predictive measures to understand long term electrode behaviour in vivo, material investigations need to be performed after explantation of the electrodes. We propose the analysis of the electrode and its environment in situ, to better understand and correlate the effects leading to electrode failure. The derived knowledge shall eventually lead to improved electrode designs, increased electrode functionality and safety in clinical applications. In this paper, the concept, design and prototyping of a sensor framework used to analyse the electrode’s behaviour and to monitor diverse electrode failure mechanisms, even during stimulation pulses, is presented. We focused on the electronic circuitry and data acquisition techniques required for a conceptual multi-sensor system. Functionality of single modules and a prototype framework have been demonstrated, but further work is needed to convert the prototype system into an implantable device. In vitro studies will be conducted first to verify sensor performance and reliability. PMID:28042815

Correlation of the Care by Design primary care practice redesign model and the principles of the patient-centered medical home.

PubMed

Egger, Marlene J; Day, Julie; Scammon, Debra L; Li, Yao; Wilson, Andrew; Magill, Michael K

2012-01-01

Health care reform requires major changes in the organization and delivery of primary care. In 2003, the University of Utah Community Clinics began developing Care by Design (CBD), a primary care model emphasizing access, care teams, and planned care. In 2007, leading primary care organizations published joint principles of the patient-centered medical home (PCMH), the basis for recognition of practices as PCMHs by the National Committee for Quality Assurance (NCQA). The objective of this study was to compare CBD and PCMH metrics conceptually and statistically. This was an observational study in 10 urban and rural primary care clinics including 56 providers. A self-evaluation included the CBD Extent of Use survey and self-estimated PCMH values. The main and secondary outcome measures were CBD scores and PCMH values, respectively. CBD and PCMH principles share common themes such as appropriate access, team-based care, the use of an augmented electronic medical record, planned care, and self-management support. CBD focuses more on the process of practice transformation. The NCQA PCMH standards focus more on structure, including policy, capacity, and populated electronic medical record fields. The Community Clinics' clinic-level PCMH/CBD correlations were low (P > .05.) Practice redesign requires an ability to assess uptake of the redesign as a transformation progresses. The correlation of CBD and PCMH is substantial conceptually but low statistically. PCMH and CBD focus on complementary aspects of redesign: PCMH on structure and CBD on process. Both domains should be addressed in practice reform. Both metrics are works in progress.

(Photosynthesis in intact plants)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Progress in the two years since the last renewal application has been excellent. We have made substantial contributions on both main fronts of the projects, and are particularly happy with the progress of our research on intact plants. The approach of basing our field work on a sound foundation of laboratory studies has enabled is to use methods which provide unambiguous assays of well characterized reactions. We have also made excellent progress in several laboratory studies which will have direct applications in future field work, and have introduced to the laboratory a range of molecular genetics techniques which will allowmore » us to explore new options in the attempt to understand function at the level of molecular structure.« less

Global Design Optimization for Aerodynamics and Rocket Propulsion Components

NASA Technical Reports Server (NTRS)

Shyy, Wei; Papila, Nilay; Vaidyanathan, Rajkumar; Tucker, Kevin; Turner, James E. (Technical Monitor)

2000-01-01

Modern computational and experimental tools for aerodynamics and propulsion applications have matured to a stage where they can provide substantial insight into engineering processes involving fluid flows, and can be fruitfully utilized to help improve the design of practical devices. In particular, rapid and continuous development in aerospace engineering demands that new design concepts be regularly proposed to meet goals for increased performance, robustness and safety while concurrently decreasing cost. To date, the majority of the effort in design optimization of fluid dynamics has relied on gradient-based search algorithms. Global optimization methods can utilize the information collected from various sources and by different tools. These methods offer multi-criterion optimization, handle the existence of multiple design points and trade-offs via insight into the entire design space, can easily perform tasks in parallel, and are often effective in filtering the noise intrinsic to numerical and experimental data. However, a successful application of the global optimization method needs to address issues related to data requirements with an increase in the number of design variables, and methods for predicting the model performance. In this article, we review recent progress made in establishing suitable global optimization techniques employing neural network and polynomial-based response surface methodologies. Issues addressed include techniques for construction of the response surface, design of experiment techniques for supplying information in an economical manner, optimization procedures and multi-level techniques, and assessment of relative performance between polynomials and neural networks. Examples drawn from wing aerodynamics, turbulent diffuser flows, gas-gas injectors, and supersonic turbines are employed to help demonstrate the issues involved in an engineering design context. Both the usefulness of the existing knowledge to aid current design practices and the need for future research are identified.

Evolution of the Global Use of Unsafe Medical Injections, 2000–2010

PubMed Central

Pépin, Jacques; Abou Chakra, Claire Nour; Pépin, Eric; Nault, Vincent

2013-01-01

Objective Since 1999, substantial efforts have been made by the international community to reduce the risks associated with unsafe injections, through ministries of health, international donors, the World Health Organization and the Safe Injection Global Network. The present study attempted to measure the progress, or lack thereof, made over the 2000–2010 decade in reducing unsafe injections in ten regions of the world corresponding to developing and transitional economies. Methods Data about the number of injections per person per year and the proportion of re-use of syringes and needles were obtained for 2010, mainly from population surveys, and compared with previous estimates for 2000 which had used various sources of information including injection safety assessments, population surveys and published studies on injection practices. Results From 2000 to 2010, in developing countries and transitional economies, the average number of injections per person per year decreased from 3.40 to 2.88, while the proportion of re-use of injection devices dropped from 39.8% to 5.5%. Combining both factors the number of unsafe injections per person per year decreased from 1.35 to 0.16. Even if substantial progress has been made, the Eastern Mediterranean region remains problematic, with 0.57 unsafe injections per person per year. In sub-Saharan Africa and Latin America, people now receive on average only 0.04–0.05 unsafe injections per year. Conclusion Substantial progress has been made in reducing the number of unsafe injections in developing countries and transitional economies, essentially through a reduction in the re-use of injection devices. In some regions, elimination of unsafe injections might become a reasonable goal. PMID:24324650

Cohort Study on Predictors of Need for Nursing Care in Alzheimer's Disease: An Analysis of Healthcare Data.

PubMed

Brüggenjürgen, Bernd; Andersohn, Frank; Burkowitz, Jörg; Ezzat, Nadja; Gaudig, Maren; Willich, Stefan N

2016-10-18

The individual and societal burden of Alzheimer's disease (AD) is substantial. Identifying relevant factors deteriorating AD and inducing need for nursing care would be of high relevance for healthcare planning. The main objective of this study was the identification of predictors of first assignment of a level of long-term care in AD, used as an approximation for disease progression. In a retrospective cohort study using data from a large German statutory health and long-term care insurance (SHI) company, co-morbidities and drug exposure were evaluated with respect to their predictive value for disease progression (first day the amount of daily nursing care exceeded 1.5 hours). Time to disease progression was modeled using COX-proportional hazard regression with stepwise selection of predictor variables. The risk of nursing care need increased substantially with increasing age. Number of hospitalizations and number of different drugs used were significant indicators for progression, whereas outpatient visits were associated with a reduced need for care. Gender did not indicate significant influence on progression. Malignant neoplasms of ill-defined, secondary, and unspecified sites, malnutrition, renal failure, and injuries increased the risk of need for nursing care most significantly. Among prescribed drugs, significant increased risks were associated with drugs used in diabetes, preparations for treatment of wounds and ulcers, antiseptics and disinfectants, and analgesics. Physical comorbidities are relevant contributors to an increase in need for nursing care. Some medical predicting conditions may be linked to cognition, while others may be directly linked to demand for care. AD patients with these comorbidities should be monitored with special attention, as they may be under an increased risk of care dependency.

Control of Future Air Traffic Systems via Complexity Bound Management

NASA Technical Reports Server (NTRS)

Alexandrov, Natalia

2013-01-01

The complexity of the present system for managing air traffic has led to "discreteness" in approaches to creating new concepts: new concepts are created as point designs, based on experience, expertise, and creativity of the proposer. Discrete point designs may be highly successful but they are difficult to substantiate in the face of equally strong substantiation of competing concepts, as well as the state of the art in concept evaluation via simulations. Hybrid concepts may present a compromise - the golden middle. Yet a hybrid of sometimes in principle incompatible concepts forms another point design that faces the challenge of substantiation and validation. We are faced with the need to re-design the air transportation system ab initio. This is a daunting task, especially considering the problem of transitioning from the present system to any fundamentally new system. However, design from scratch is also an opportunity to reconsider approaches to new concept development. In this position paper we propose an approach, Optimized Parametric Functional Design, for systematic development of concepts for management and control of airspace systems, based on optimization formulations in terms of required system functions and states. This reasoning framework, realizable in the context of ab initio system design, offers an approach to deriving substantiated airspace management and control concepts. With growing computational power, we hope that the approach will also yield a methodology for actual dynamic control of airspace

24 CFR 598.420 - Periodic progress determinations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Periodic progress determinations. 598.420 Section 598.420 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Post-Designation Requirements § 598.420 Periodic progress determinations. HUD will regularly...

24 CFR 598.420 - Periodic progress determinations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Periodic progress determinations. 598.420 Section 598.420 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Post-Designation Requirements § 598.420 Periodic progress determinations. HUD will regularly...

24 CFR 598.420 - Periodic progress determinations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Periodic progress determinations. 598.420 Section 598.420 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Post-Designation Requirements § 598.420 Periodic progress determinations. HUD will regularly...

Uncooled infrared imaging using bimaterial microcantilever arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grbovic, Dragoslav; Lavrik, Nickolay V; Rajic, Slobodan

2006-01-01

We report on the fabrication and characterization of microcantilever based uncooled focal plane array (FPA) for infrared imaging. By combining a streamlined design of microcantilever thermal transducers with a highly efficient optical readout, we minimized the fabrication complexity while achieving a competitive level of imaging performance. The microcantilever FPAs were fabricated using a straightforward fabrication process that involved only three photolithographic steps (i.e. three masks). A designed and constructed prototype of an IR imager employed a simple optical readout based on a noncoherent low-power light source. The main figures of merit of the IR imager were found to be comparablemore » to those of uncooled MEMS infrared detectors with substantially higher degree of fabrication complexity. In particular, the NETD and the response time of the implemented MEMS IR detector were measured to be as low as 0.5K and 6 ms, respectively. The potential of the implemented designs can also be concluded from the fact that the constructed prototype enabled IR imaging of close to room temperature objects without the use of any advanced data processing. The most unique and practically valuable feature of the implemented FPAs, however, is their scalability to high resolution formats, such as 2000x2000, without progressively growing device complexity and cost.« less

Bayesian adaptive phase II screening design for combination trials.

PubMed

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment.

PubMed

Huang, Guoyou; Li, Fei; Zhao, Xin; Ma, Yufei; Li, Yuhui; Lin, Min; Jin, Guorui; Lu, Tian Jian; Genin, Guy M; Xu, Feng

2017-10-25

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Treating cancer with selective CDK4/6 inhibitors.

PubMed

O'Leary, Ben; Finn, Richard S; Turner, Nicholas C

2016-07-01

Uncontrolled cellular proliferation, mediated by dysregulation of the cell-cycle machinery and activation of cyclin-dependent kinases (CDKs) to promote cell-cycle progression, lies at the heart of cancer as a pathological process. Clinical implementation of first-generation, nonselective CDK inhibitors, designed to inhibit this proliferation, was originally hampered by the high risk of toxicity and lack of efficacy noted with these agents. The emergence of a new generation of selective CDK4/6 inhibitors, including ribociclib, abemaciclib and palbociclib, has enabled tumour types in which CDK4/6 has a pivotal role in the G1-to-S-phase cell-cycle transition to be targeted with improved effectiveness, and fewer adverse effects. Results of pivotal phase III trials investigating palbociclib in patients with advanced-stage oestrogen receptor (ER)-positive breast cancer have demonstrated a substantial improvement in progression-free survival, with a well-tolerated toxicity profile. Mechanisms of acquired resistance to CDK4/6 inhibitors are beginning to emerge that, although unwelcome, might enable rational post-CDK4/6 inhibitor therapeutic strategies to be identified. Extending the use of CDK4/6 inhibitors beyond ER-positive breast cancer is challenging, and will likely require biomarkers that are predictive of a response, and the use of combination therapies in order to optimize CDK4/6 targeting.

CANCER RISK ASSESSMENT AND PREVENTION: WHERE DO WE STAND?

EPA Science Inventory

This paper reviews selected aspects of progress and setbacks in cancer risk assessment and prevention during the four decades since the founding in 1947 of the Institute of Environmental Medicine at the New York University Medical Center. he period has heen marked by substantial ...

The history and future of dietary guidance in America

USDA-ARS?s Scientific Manuscript database

Evidence-based dietary guidance in the US has progressed substantially since its inception over 100 years ago. This review describes the historical development and significance of dietary guidance in the US, including the Dietary Guidelines for Americans, and emphasizes the foundations upon which th...

The impact of tobacco control research on policy: 20 years of progress.

PubMed

Warner, Kenneth E; Tam, Jamie

2012-03-01

To assess progress in tobacco control policy research and the relevance of research to policy making. Over 100 experts were surveyed about their opinions on the body of research existing in 1992 and 2011 concerning 11 areas of tobacco control policy, the state of policy implementation in both years, the extent to which research has affected policy adoption and how experience with policy has influenced research. Case studies of how research and policy implementation have interacted were developed. The body of research was not judged 'substantial' in any of the policy areas in 1992. In 2011, 6 of the 11 areas were evaluated as substantial. None ranked as substantial regarding policy implementation in 1992, but by 2011 half were so ranked for developed countries; in low-income and middle-income countries policy implementation moved from very low to moderate. Respondents judged the role of research in actual policy making as 'substantial' regarding clean indoor air, taxation and cessation treatment policy. Case studies illustrate how research can directly affect policy (taxation), how policy and research can have iterative effects (clean indoor air), and how research and policy interact in the case of novel policies (graphic cigarette pack warnings). The role of research in the formulation of the Framework Convention on Tobacco Control is also examined. Policy research goals established in 1992 have been largely realised. For select tobacco control policies, research has made truly important contributions to saving lives. Evidence-based policy adoption will continue to be essential to minimising the toll of tobacco, especially in the world's poorer countries.

Evaluating progressive-rendering algorithms in appearance design tasks.

PubMed

Jiawei Ou; Karlik, Ondrej; Křivánek, Jaroslav; Pellacini, Fabio

2013-01-01

Progressive rendering is becoming a popular alternative to precomputational approaches to appearance design. However, progressive algorithms create images exhibiting visual artifacts at early stages. A user study investigated these artifacts' effects on user performance in appearance design tasks. Novice and expert subjects performed lighting and material editing tasks with four algorithms: random path tracing, quasirandom path tracing, progressive photon mapping, and virtual-point-light rendering. Both the novices and experts strongly preferred path tracing to progressive photon mapping and virtual-point-light rendering. None of the participants preferred random path tracing to quasirandom path tracing or vice versa; the same situation held between progressive photon mapping and virtual-point-light rendering. The user workflow didn’t differ significantly with the four algorithms. The Web Extras include a video showing how four progressive-rendering algorithms converged (at http://youtu.be/ck-Gevl1e9s), the source code used, and other supplementary materials.

Social dominance explains within-ejaculate variation in sperm design in a passerine bird.

PubMed

Rojas Mora, Alfonso; Meniri, Magali; Ciprietti, Sabrina; Helfenstein, Fabrice

2017-03-04

Comparative studies suggest that sperm competition exerts stabilizing selection towards an optimal sperm design - e.g., the relative size and covariation of different sperm sections or a quantitative measure of sperm shape - that maximizes male fertility, which results in reduced levels of within-male variation in sperm morphology. Yet, these studies also reveal substantial amounts of unexplained within-ejaculate variance, and the factors presiding to the maintenance of such within-male variation in sperm design at the population level still remain to be identified. Sperm competition models predict that males should progressively invest more resources in their germline as their mating costs increase, i.e., the soma/germline allocation trade-off hypothesis. When access to fertile females is determined by social dominance, the soma/germline allocation trade-off hypothesis predicts that dominant males should invest less in the control of spermatogenesis. Hence, dominance should positively correlate with within-male variance in sperm design. In support of this hypothesis, we found that dominant house sparrow males produce ejaculates with higher levels of within-ejaculate variation in sperm design compared to subordinate males. However, after experimentally manipulating male social status, this pattern was not maintained. Our results suggest that males might control variation in sperm design according to their social status to some extent. Yet, it seems that such within-ejaculate variation in sperm design cannot be rapidly adjusted to a new status. While variation in sperm design could result from various non-exclusive sources, we discuss how strategic allocation of resources to the somatic vs. the germline functions could be an important process shaping the relationship between within-male variation in sperm design and social status.

Design and development of progressive tool for manufacturing washer

NASA Astrophysics Data System (ADS)

Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

2017-07-01

In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

2016 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satyapal, Sunita

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

Robert H. Goddard and His Liquid-Gasoline Rocket

NASA Technical Reports Server (NTRS)

1926-01-01

Dr. Goddard's 1926 rocket configuration. Dr. Goddard's liquid oxygen-gasoline rocket was fired on March 16, 1926, at Auburn, Massachusetts. It flew for only 2.5 seconds, climbed 41 feet, and landed 184 feet away in a cabbage patch. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

2010 Annual Progress Report: DOE Hydrogen Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

2015 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popovich, Neil

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

Early Rockets

NASA Image and Video Library

1926-03-16

Dr. Goddard's 1926 rocket configuration. Dr. Goddard's liquid oxygen-gasoline rocket was fired on March 16, 1926, at Auburn, Massachusetts. It flew for only 2.5 seconds, climbed 41 feet, and landed 184 feet away in a cabbage patch. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

Early Rockets

NASA Image and Video Library

1926-03-16

Dr. Robert H. Goddard and liquid oxygen-gasoline rocket in the frame from which it was fired on March 16, 1926, at Auburn, Mass. It flew for only 2.5 seconds, climbed 41 feet, and landed 184 feet away in a cabbage patch. From 1930 to 1941, Dr. Goddard made substantial progress in the development of progressively larger rockets, which attained altitudes of 2400 meters, and refined his equipment for guidance and control, his techniques of welding, and his insulation, pumps, and other associated equipment. In many respects, Dr. Goddard laid the essential foundations of practical rocket technology

2012 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence R. Sita

Ferrocene-based molecular components for nanoelectronics offer a number of distinct advantages relative to all carbon frameworks due to metal-centered molecular states that should be closer in energy to the Fermi levels of the metal electrodes in metal / molecule / metal heterojunctions. Given this, the overall goal of the project was to investigate the conduction physics of a variety of proposed ferrocene diode / transistor designs in order to address the fundamental question; can electron transport within nm-length scale structures be modulated in a controlled fashion? During the funded period, substantial progress towards achieving this goal was made by surmountingmore » a number of scientific and technical obstacles. More specifically, a concise and general synthetic route to several mono- and diferrocene dithiols and monothiols was achieved that now allows for the directed and controlled assembly of a variety of metal / molecule /metal test structures for the single molecule conductance measurements and the fabrication of self-assembled monolayers (SAMs) on Au(111) that are amenable to quantitative electrochemical characterization of electron-transfer rates. Most importantly, by using an electromigrated test structure, reproducible I/V data for one of the ferrocene dithiol molecules have been collected which exhibit surprisingly high conductance. Exceptional agreement of this result with theory serves to substantiate the original hypothesis that metal-centered states within a molecular bridge can indeed serve to establish higher conductance relative to all-organic molecular bridges. Overall, the successful demonstration of the ability of ferrocene-molecular frameworks to serve as exceptional molecular conductors will play an important role in the continued evolution in design of molecular components for nanoelectronic devices, which in turn, will have a positive impact on the science and potential technologies associated with these systems.« less

Development and initial validation of the Classification of Early-Onset Scoliosis (C-EOS).

PubMed

Williams, Brendan A; Matsumoto, Hiroko; McCalla, Daren J; Akbarnia, Behrooz A; Blakemore, Laurel C; Betz, Randal R; Flynn, John M; Johnston, Charles E; McCarthy, Richard E; Roye, David P; Skaggs, David L; Smith, John T; Snyder, Brian D; Sponseller, Paul D; Sturm, Peter F; Thompson, George H; Yazici, Muharrem; Vitale, Michael G

2014-08-20

Early-onset scoliosis is a heterogeneous condition, with highly variable manifestations and natural history. No standardized classification system exists to describe and group patients, to guide optimal care, or to prognosticate outcomes within this population. A classification system for early-onset scoliosis is thus a necessary prerequisite to the timely evolution of care of these patients. Fifteen experienced surgeons participated in a nominal group technique designed to achieve a consensus-based classification system for early-onset scoliosis. A comprehensive list of factors important in managing early-onset scoliosis was generated using a standardized literature review, semi-structured interviews, and open forum discussion. Three group meetings and two rounds of surveying guided the selection of classification components, subgroupings, and cut-points. Initial validation of the system was conducted using an interobserver reliability assessment based on the classification of a series of thirty cases. Nominal group technique was used to identify three core variables (major curve angle, etiology, and kyphosis) with high group content validity scores. Age and curve progression ranked slightly lower. Participants evaluated the cases of thirty patients with early-onset scoliosis for reliability testing. The mean kappa value for etiology (0.64) was substantial, while the mean kappa values for major curve angle (0.95) and kyphosis (0.93) indicated almost perfect agreement. The final classification consisted of a continuous age prefix, etiology (congenital or structural, neuromuscular, syndromic, and idiopathic), major curve angle (1, 2, 3, or 4), and kyphosis (-, N, or +) variables, and an optional progression modifier (P0, P1, or P2). Utilizing formal consensus-building methods in a large group of surgeons experienced in treating early-onset scoliosis, a novel classification system for early-onset scoliosis was developed with all core components demonstrating substantial to excellent interobserver reliability. This classification system will serve as a foundation to guide ongoing research efforts and standardize communication in the clinical setting. Copyright © 2014 by The Journal of Bone and Joint Surgery, Incorporated.

The Future of Adaptive Learning: Does the Crowd Hold the Key?

ERIC Educational Resources Information Center

Heffernan, Neil T.; Ostrow, Korinn S.; Kelly, Kim; Selent, Douglas; Van Inwegen, Eric G.; Xiong, Xiaolu; Williams, Joseph Jay

2016-01-01

Due to substantial scientific and practical progress, learning technologies can effectively adapt to the characteristics and needs of students. This article considers how learning technologies can adapt over time by crowdsourcing contributions from teachers and students--explanations, feedback, and other pedagogical interactions. Considering the…

76 FR 68617 - National Diabetes Month, 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... have made substantial progress in combating diabetes, the number of Americans burdened by this disease... and children alike. It is essential that all Americans take steps to assess and reduce their risk of... Americans joining a new health plan can receive recommended preventive services, like diabetes screenings...

37 CFR 11.306 - Trial publicity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... statement that the practitioner knows or reasonably should know will be disseminated by means of public communication and will have a substantial likelihood of materially prejudicing an adjudicative proceeding in the...) Information contained in a public record; (3) That an investigation of a matter is in progress; (4) The...

37 CFR 11.306 - Trial publicity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... statement that the practitioner knows or reasonably should know will be disseminated by means of public communication and will have a substantial likelihood of materially prejudicing an adjudicative proceeding in the...) Information contained in a public record; (3) That an investigation of a matter is in progress; (4) The...

10 CFR 725.15 - Requirements for approval of applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... engaged in a substantial effort to develop, design, build or operate a chemical processing plant or other... (b)(2)(i) of this section, substantial scientific, engineering or other professional services to be... the paragraph (b)(3)(i) of this section substantial scientific, engineering, or other professional...

The national response for preventing healthcare-associated infections: research and adoption of prevention practices.

PubMed

Kahn, Katherine L; Mendel, Peter; Leuschner, Kristin J; Hiatt, Liisa; Gall, Elizabeth M; Siegel, Sari; Weinberg, Daniel A

2014-02-01

Healthcare-associated infections (HAIs) have long been the subject of research and prevention practice. When findings show potential to significantly impact outcomes, clinicians, policymakers, safety experts, and stakeholders seek to bridge the gap between research and practice by identifying mechanisms and assigning responsibility for translating research to practice. This paper describes progress and challenges in HAI research and prevention practices, as explained through an examination of Health and Human Services (HHS) Action Plan's goals, inputs, and implementation in each area. We used the Context-Input-Process-Product evaluation model, together with an HAI prevention system framework, to assess the transformative processes associated with HAI research and adoption of prevention practices. Since the introduction of the Action Plan, HHS has made substantial progress in prioritizing research projects, translating findings from those projects into practice, and designing and implementing research projects in multisite practice settings. Research has emphasized the basic science and epidemiology of HAIs, the identification of gaps in research, and implementation science. The basic, epidemiological, and implementation science communities have joined forces to better define mechanisms and responsibilities for translating HAI research into practice. Challenges include the ongoing need for better evidence about intervention effectiveness, the growing implementation burden on healthcare providers and organizations, and challenges implementing certain practices. Although these HAI research and prevention practice activities are complex spanning multiple system functions and properties, HHS is making progress so that the right methods for addressing complex HAI problems at the interface of patient safety and clinical practice can emerge.

Formal Learning Sequences and Progression in the Studio: A Framework for Digital Design Education

ERIC Educational Resources Information Center

Wärnestål, Pontus

2016-01-01

This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the…

Triplet-triplet annihilation in highly efficient fluorescent organic light-emitting diodes: current state and future outlook.

PubMed

Kondakov, Denis Y

2015-06-28

Studies of delayed electroluminescence in highly efficient fluorescent organic light-emitting diodes (OLEDs) of many dissimilar architectures indicate that the triplet-triplet annihilation (TTA) significantly increases yield of excited singlet states-emitting molecules in this type of device thereby contributes substantially to their efficiency. Towards the end of the 2000s, the essential role of TTA in realizing highly efficient fluorescent devices was widely recognized. Analysis of a diverse set of fluorescent OLEDs shows that high efficiencies are often cor-related to TTA extents. It is therefore likely that it is the long-term empirical optimization of OLED efficiencies that has resulted in fortuitous emergence of TTA as a large and ubiquitous contributor to efficiency. TTA contributions as high as 20-30% are common in the state-of-the-art OLEDs, and even become dominant in special cases, where TTA is shown to substantially exceed the spin-statistical limit. The fundamental features of OLED efficiency enhancement via TTA-molecular structure-dependent contributions, current density-dependent intensities in practical devices and frequently observed antagonistic relationships between TTA extent and OLED lifetime-came to be understood over the course of the next few years. More recently, however, there was much less reported progress with respect to all-important quantitative details of the TTA mechanism. It should be emphasized that, to this day and despite the decades of work on improving blue phosphorescent OLEDs as well as the recent advent of thermally activated delayed fluorescence OLEDs, the majority of practical blue OLEDs still rely on TTA. Considering such practical importance of fluorescent blue OLEDs, the design of blue OLED-compatible materials capable of substantially exceeding the spin-statistical limit in TTA, elimination of the antagonistic relationship between TTA-related efficiency gains and lifetime losses, and designing devices with an extended range of current densities producing near-maximum TTA electroluminescence are the areas where future improvements would be most beneficial. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

A Multi-state Model for Designing Clinical Trials for Testing Overall Survival Allowing for Crossover after Progression

PubMed Central

Xia, Fang; George, Stephen L.; Wang, Xiaofei

2015-01-01

In designing a clinical trial for comparing two or more treatments with respect to overall survival (OS), a proportional hazards assumption is commonly made. However, in many cancer clinical trials, patients pass through various disease states prior to death and because of this may receive treatments other than originally assigned. For example, patients may crossover from the control treatment to the experimental treatment at progression. Even without crossover, the survival pattern after progression may be very different than the pattern prior to progression. The proportional hazards assumption will not hold in these situations and the design power calculated on this assumption will not be correct. In this paper we describe a simple and intuitive multi-state model allowing for progression, death before progression, post-progression survival and crossover after progression and apply this model to the design of clinical trials for comparing the OS of two treatments. For given values of the parameters of the multi-state model, we simulate the required number of deaths to achieve a specified power and the distribution of time required to achieve the requisite number of deaths. The results may be quite different from those derived using the usual PH assumption. PMID:27239255

Beneficial and detrimental role of adenosine signaling in diseases and therapy

PubMed Central

Liu, Hong

2015-01-01

Adenosine is a major signaling nucleoside that orchestrates cellular and tissue adaptation under energy depletion and ischemic/hypoxic conditions by activation of four G protein-coupled receptors (GPCR). The regulation and generation of extracellular adenosine in response to stress are critical in tissue protection. Both mouse and human studies reported that extracellular adenosine signaling plays a beneficial role during acute states. However, prolonged excess extracellular adenosine is detrimental and contributes to the development and progression of various chronic diseases. In recent years, substantial progress has been made to understand the role of adenosine signaling in different conditions and to clarify its significance during the course of disease progression in various organs. These efforts have and will identify potential therapeutic possibilities for protection of tissue injury at acute stage by upregulation of adenosine signaling or attenuation of chronic disease progression by downregulation of adenosine signaling. This review is to summarize current progress and the importance of adenosine signaling in different disease stages and its potential therapeutic effects. PMID:26316513

Pakistan and the Millennium Development Goals for Maternal and Child Health: progress and the way forward.

PubMed

Rizvi, Arjumand; Bhatti, Zaid; Das, Jai K; Bhutta, Zulfiqar A

2015-01-01

The world has made substantial progress in reducing maternal and child mortality, but many countries are projected to fall short of achieving their Millennium Development Goals (MDGs) 4 and 5 targets. The major objective of this paper is to examine progress in Pakistan in reducing maternal and child mortality and malnutrition over the last two decades. Data from recent national and international surveys suggest that Pakistan lags behind on all of its MDGs related to maternal and child health and, for some indicators especially related to nutrition, the situation has worsened from the baseline of 1990. Progress in addressing key social determinants such as poverty, female education and empowerment has also been slow and unregulated population growth has further compromised progress. There is a need to integrate the various different sectors and programmes to achieve the desired results effectively and efficiently as many of the determinants and influencing factors are outside the health sector.

32 CFR 48.302 - Substantiating evidence regarding dependency and age of dependents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false Substantiating evidence regarding dependency and age of dependents. 48.302 Section 48.302 National Defense Department of Defense OFFICE OF THE... Designation of Beneficiaries § 48.302 Substantiating evidence regarding dependency and age of dependents. At...

32 CFR 48.302 - Substantiating evidence regarding dependency and age of dependents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Substantiating evidence regarding dependency and age of dependents. 48.302 Section 48.302 National Defense Department of Defense OFFICE OF THE... Designation of Beneficiaries § 48.302 Substantiating evidence regarding dependency and age of dependents. At...

32 CFR 48.302 - Substantiating evidence regarding dependency and age of dependents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false Substantiating evidence regarding dependency and age of dependents. 48.302 Section 48.302 National Defense Department of Defense OFFICE OF THE... Designation of Beneficiaries § 48.302 Substantiating evidence regarding dependency and age of dependents. At...

32 CFR 48.302 - Substantiating evidence regarding dependency and age of dependents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Substantiating evidence regarding dependency and age of dependents. 48.302 Section 48.302 National Defense Department of Defense OFFICE OF THE... Designation of Beneficiaries § 48.302 Substantiating evidence regarding dependency and age of dependents. At...

32 CFR 48.302 - Substantiating evidence regarding dependency and age of dependents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Substantiating evidence regarding dependency and age of dependents. 48.302 Section 48.302 National Defense Department of Defense OFFICE OF THE... Designation of Beneficiaries § 48.302 Substantiating evidence regarding dependency and age of dependents. At...

5 CFR 1631.15 - Information to be disclosed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... substantial competitive harm. The submitter as part of its submission, must explain the rationale for the... substantial competitive harm. (iii) After January 1, 1988, a submitter who does not designate portions of a... substantial harm to the competitive position of the submitter. (3) When the Board determines that it has...

5 CFR 1631.15 - Information to be disclosed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... substantial competitive harm. The submitter as part of its submission, must explain the rationale for the... substantial competitive harm. (iii) After January 1, 1988, a submitter who does not designate portions of a... substantial harm to the competitive position of the submitter. (3) When the Board determines that it has...

5 CFR 1631.15 - Information to be disclosed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... substantial competitive harm. The submitter as part of its submission, must explain the rationale for the... substantial competitive harm. (iii) After January 1, 1988, a submitter who does not designate portions of a... substantial harm to the competitive position of the submitter. (3) When the Board determines that it has...

5 CFR 1631.15 - Information to be disclosed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... substantial competitive harm. The submitter as part of its submission, must explain the rationale for the... substantial competitive harm. (iii) After January 1, 1988, a submitter who does not designate portions of a... substantial harm to the competitive position of the submitter. (3) When the Board determines that it has...

5 CFR 1631.15 - Information to be disclosed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... substantial competitive harm. The submitter as part of its submission, must explain the rationale for the... substantial competitive harm. (iii) After January 1, 1988, a submitter who does not designate portions of a... substantial harm to the competitive position of the submitter. (3) When the Board determines that it has...

Personalized predictive modeling for patients with Alzheimer's disease using an extension of Sullivan's life table model.

PubMed

Stallard, Eric; Kinosian, Bruce; Stern, Yaakov

2017-09-20

Alzheimer's disease (AD) progression varies substantially among patients, hindering calculation of residual total life expectancy (TLE) and its decomposition into disability-free life expectancy (DFLE) and disabled life expectancy (DLE) for individual patients with AD. The objective of the present study was to assess the accuracy of a new synthesis of Sullivan's life table (SLT) and longitudinal Grade of Membership (L-GoM) models that estimates individualized TLEs, DFLEs, and DLEs for patients with AD. If sufficiently accurate, such information could enhance the quality of important decisions in AD treatment and patient care. We estimated a new SLT/L-GoM model of the natural history of AD over 10 years in the Predictors 2 Study cohort: N = 229 with 6 fixed and 73 time-varying covariates over 21 examinations covering 11 measurement domains including cognitive, functional, behavioral, psychiatric, and other symptoms/signs. Total remaining life expectancy was censored at 10 years. Disability was defined as need for full-time care (FTC), the outcome most strongly associated with AD progression. All parameters were estimated via weighted maximum likelihood using data-dependent weights designed to ensure that the estimates of the prognostic subtypes were of high quality. Goodness of fit was tested/confirmed for survival and FTC disability for five relatively homogeneous subgroups defined to cover the range of patient outcomes over the 21 examinations. The substantial heterogeneity in initial patient presentation and AD progression was captured using three clinically meaningful prognostic subtypes and one terminal subtype exhibiting highly differentiated symptom severity on 7 of the 11 measurement domains. Comparisons of the observed and estimated survival and FTC disability probabilities demonstrated that the estimates were accurate for all five subgroups, supporting their use in AD life expectancy calculations. Mean 10-year TLE differed widely across subgroups: range 3.6-8.0 years, average 6.1 years. Mean 10-year DFLE differed relatively even more widely across subgroups: range 1.2-6.5 years, average 4.0 years. Mean 10-year DLE was relatively much closer: range 1.5-2.3 years, average 2.1 years. The SLT/L-GoM model yields accurate maximum likelihood estimates of TLE, DFLE, and DLE for patients with AD; it provides a realistic, comprehensive modeling framework for endpoint and resource use/cost calculations.

How does the size and shape of local populations in China compare to general anthropometric surveys currently used for product design?

PubMed

Daniell, Nathan; Fraysse, François; Paul, Gunther

2012-01-01

Anthropometry has long been used for a range of ergonomic applications & product design. Although products are often designed for specific cohorts, anthropometric data are typically sourced from large scale surveys representative of the general population. Additionally, few data are available for emerging markets like China and India. This study measured 80 Chinese males that were representative of a specific cohort targeted for the design of a new product. Thirteen anthropometric measurements were recorded and compared to two large databases that represented a general population, a Chinese database and a Western database. Substantial differences were identified between the Chinese males measured in this study and both databases. The subjects were substantially taller, heavier and broader than subjects in the older Chinese database. However, they were still substantially smaller, lighter and thinner than Western males. Data from current Western anthropometric surveys are unlikely to accurately represent the target population for product designers and manufacturers in emerging markets like China.

Case management considerations of progressive dementia in a home setting.

PubMed

Pierce, Mary Ellen

2010-01-01

Nursing theory, research, and best practice guidelines contribute substantially to the field of dementia care. Interventional plans are challenged most by those dementias considered progressive and deteriorative in nature, requiring ongoing reassessment and modification of care practices as the clinical course changes. The purpose of this article is to provide guidelines for case managers in the development of effective, individualized care plans for clients with progressive dementia residing in a home setting. The application of these guidelines is illustrated through the presentation of an actual case. The practice setting is a private home in the Pacific Northwest. Geriatric case management is provided by an RN case manager. Progressive dementia presents challenges to home care. Professional case management using comprehensive, holistic assessment, collaborative approaches, and best practice fundamentals serve to create an effective, individualized plan of care. The increasing geriatric population presents great opportunities for case managers in strategic management for creating successful home care models in clients with progressive dementia. Use of nursing diagnoses, dementia research, and collaborative approaches with families and other medical providers creates a viable alternative for clients with progressive dementia.

Bayesian adaptive phase II screening design for combination trials

PubMed Central

Cai, Chunyan; Yuan, Ying; Johnson, Valen E

2013-01-01

Background Trials of combination therapies for the treatment of cancer are playing an increasingly important role in the battle against this disease. To more efficiently handle the large number of combination therapies that must be tested, we propose a novel Bayesian phase II adaptive screening design to simultaneously select among possible treatment combinations involving multiple agents. Methods Our design is based on formulating the selection procedure as a Bayesian hypothesis testing problem in which the superiority of each treatment combination is equated to a single hypothesis. During the trial conduct, we use the current values of the posterior probabilities of all hypotheses to adaptively allocate patients to treatment combinations. Results Simulation studies show that the proposed design substantially outperforms the conventional multiarm balanced factorial trial design. The proposed design yields a significantly higher probability for selecting the best treatment while allocating substantially more patients to efficacious treatments. Limitations The proposed design is most appropriate for the trials combining multiple agents and screening out the efficacious combination to be further investigated. Conclusions The proposed Bayesian adaptive phase II screening design substantially outperformed the conventional complete factorial design. Our design allocates more patients to better treatments while providing higher power to identify the best treatment at the end of the trial. PMID:23359875

Experimental and Theoretical Studies of Atmosphereic Inorganic Chlorine Chemistry

NASA Technical Reports Server (NTRS)

Sander, Stanley P.; Friedl, Randall R.

1993-01-01

Over the last five years substantial progress has been made in defining the realm of new chlorine chemistry in the polar stratosphere. Application of existing experimental techniques to potentially important chlorine-containing compounds has yielded quantitative kinetic and spectroscopic data as well as qualitative mechanistic insights into the relevant reactions.

78 FR 61811 - National Domestic Violence Awareness Month, 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-04

... Proclamation Since the passage of the Violence Against Women Act (VAWA) nearly 20 years ago, our Nation's... National Domestic Violence Awareness Month, we stand with domestic abuse survivors, celebrate our Nation's.... Although we have made substantial progress in reducing domestic violence, one in four women and one in...

How Reliable is the Temperature Forecast?

ERIC Educational Resources Information Center

Christmann, Edwin P.

2005-01-01

Project 2061 suggests "technology provides the eyes and ears of science--and some of the muscle too. The electronic computer, for example, has led to substantial progress in the study of weather systems...." Obviously, now that teachers have access to a kaleidoscope of technological advancements, middle school science teachers can engage students…

Progress and successes of the Specialty Crop Research Initiative on acrylamide reduction in processed potato products

USDA-ARS?s Scientific Manuscript database

Acrylamide, a suspected human carcinogen, is a Maillard reaction product that forms when carbohydrate-rich foods are cooked at high temperatures. Processed potato products, including French fries and potato chips, make a substantial contribution to total dietary acrylamide. Health safety concerns ra...

What is Job Satisfaction?

ERIC Educational Resources Information Center

Locke. Edwin A.

Despite considerable interest in the study of job satisfaction and dissatisfaction, our understanding of these phenomena has not increased substantially in the past 30 years. It is argued that a major reason for this lack of progress is the implicit conception of casuality accepted by most psychologists. It is called the policy of "correlation…

Ten Years after "A Nation at Risk."

ERIC Educational Resources Information Center

Asayesh, Gelareh

1993-01-01

In April 1983, the National Commission on Excellence in Education issued a 32-page report ("A Nation at Risk") calling for drastic educational reforms. A decade later, four top education reformers--John Goodlad, Henry Levin, Phillip Schlechty, and Ted Sizer--assess this document and its legacy. Most see substantial progress despite the…

Report: EPA Needs to Direct More Attention, Efforts, and Funding to Enhance Its Speciation Monitoring Program for Measuring Fine Particulate Matter

EPA Pesticide Factsheets

Report #2005-P-00004, February 7, 2005. EPA has made substantial progress in establishing a speciation monitoring network, but still faces a number of challenges in ensuring that the controls are implemented at the right sources.

Attachment in Middle Childhood: Progress and Prospects

ERIC Educational Resources Information Center

Bosmans, Guy; Kerns, Kathryn A.

2015-01-01

Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview…

Genome editing: progress and challenges for medical applications.

PubMed

Carroll, Dana

2016-11-15

The development of the CRISPR-Cas platform for genome editing has greatly simplified the process of making targeted genetic modifications. Applications of genome editing are expected to have a substantial impact on human therapies through the development of better animal models, new target discovery, and direct therapeutic intervention.

12 CFR 213.4 - Content of disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... mathematical progression of how the scheduled periodic payment is derived, in a format substantially similar to... the end of the lease term; and the amount or a description of the method for determining the amount of... specify the amount or method for determining any charge for excess mileage. (i) Purchase option. A...

Social Programs That Work.

ERIC Educational Resources Information Center

Crane, Jonathan, Ed.

In recent years, social programs for the poor have lost the support of the American public. This book describes some of the very best programs and documents their benefits, demonstrating that we can, in fact, make substantial progress in the fight against educational failure, family dissolution, violent crime, substance abuse, unemployment, and…

NIMH's TADS: More than Just a Tad of Progress?

ERIC Educational Resources Information Center

Jensen, Peter S.

2005-01-01

The Treatment for Adolescents With Depression Study (TADS) derives substantial public health significance from its head-to-head comparisons of carefully administered medication versus a carefully crafted cognitive-behavioral therapy in youth with major depression, the first major clinical trial of its kind. Although the study has a number of…

Why Do Teachers Leave? CenterView

ERIC Educational Resources Information Center

Center for the Future of Teaching and Learning, 2007

2007-01-01

While California has made substantial progress in easing its teacher shortage and reducing the concentration of the least prepared teachers in the lowest achieving schools, the effort to strengthen schools for all students is hampered by the large number of teachers who leave the profession prematurely. Policymakers at the state and local levels…

Monitoring clinical progression with mitochondrial disease biomarkers

PubMed Central

Steele, Hannah E; Horvath, Rita; Lyon, Jon J; Chinnery, Patrick F

2017-01-01

Abstract Mitochondrial disorders are genetically determined metabolic diseases due to a biochemical deficiency of the respiratory chain. Given that multi-system involvement and disease progression are common features of mitochondrial disorders they carry substantial morbidity and mortality. Despite this, no disease-modifying treatments exist with clear clinical benefits, and the current best management of mitochondrial disease is supportive. Several therapeutic strategies for mitochondrial disorders are now at a mature preclinical stage. Some are making the transition into early-phase patient trials, but the lack of validated biomarkers of disease progression presents a challenge when developing new therapies for patients. This update discusses current biomarkers of mitochondrial disease progression including metabolomics, circulating serum markers, exercise physiology, and both structural and functional imaging. We discuss the advantages and disadvantages of each approach, and consider emerging techniques with a potential role in trials of new therapies. PMID:28969370

Qualitative methods in health services and management research: pockets of excellence and progress, but still a long way to go.

PubMed

Devers, Kelly J

2011-02-01

The 10-year systematic review of published health services and management research by Weiner et al. (2011) chronicles the contributions of qualitative methods, highlights areas of substantial progress, and identifies areas in need of more progress. This article (Devers, 2011) discusses possible reasons for lack of progress in some areas--related to the under-supply of well-trained qualitative researchers and more tangible demand for their research--and mechanisms for future improvement. To ensure a robust health services research toolbox, the field must take additional steps to provide stronger education and training in qualitative methods and more funding and publication opportunities. Given the rapidly changing health care system post the passage of national health reform and the chalresearch issues associated with it, the health services research and management field will not meet its future challenges with quantitative methods alone or with a half-empty toolbox.

Failing to Learn: Towards a Unified Design Approach for Failure-Based Learning

ERIC Educational Resources Information Center

Tawfik, Andrew A.; Rong, Hui; Choi, Ikseon

2015-01-01

To date, many instructional systems are designed to support learners as they progress through a problem-solving task. Often these systems are designed in accordance with instructional design models that progress the learner efficiently through the problem-solving process. However, theories from various fields have discussed failure as a strategic…

Mathematical Models of Breast and Ovarian Cancers

PubMed Central

Botesteanu, Dana-Adriana; Lipkowitz, Stanley; Lee, Jung-Min; Levy, Doron

2016-01-01

Women constitute the majority of the aging United States (US) population, and this has substantial implications on cancer population patterns and management practices. Breast cancer is the most common women's malignancy, while ovarian cancer is the most fatal gynecological malignancy in the US. In this review we focus on these subsets of women's cancers, seen more commonly in postmenopausal and elderly women. In order to systematically investigate the complexity of cancer progression and response to treatment in breast and ovarian malignancies, we assert that integrated mathematical modeling frameworks viewed from a systems biology perspective are needed. Such integrated frameworks could offer innovative contributions to the clinical women's cancers community, since answers to clinical questions cannot always be reached with contemporary clinical and experimental tools. Here, we recapitulate clinically known data regarding the progression and treatment of the breast and ovarian cancers. We compare and contrast the two malignancies whenever possible, in order to emphasize areas where substantial contributions could be made by clinically inspired and validated mathematical modeling. We show how current paradigms in the mathematical oncology community focusing on the two malignancies do not make comprehensive use of, nor substantially reflect existing clinical data, and we highlight the modeling areas in most critical need of clinical data integration. We emphasize that the primary goal of any mathematical study of women's cancers should be to address clinically relevant questions. PMID:27259061

Comparison of left anterior descending coronary artery hemodynamics before and after angioplasty.

PubMed

Ramaswamy, S D; Vigmostad, S C; Wahle, A; Lai, Y G; Olszewski, M E; Braddy, K C; Brennan, T M H; Rossen, J D; Sonka, M; Chandran, K B

2006-02-01

Coronary artery disease (CAD) is characterized by the progression of atherosclerosis, a complex pathological process involving the initiation, deposition, development, and breakdown of the plaque. The blood flow mechanics in arteries play a critical role in the targeted locations and progression of atherosclerotic plaque. In coronary arteries with motion during the cardiac contraction and relaxation, the hemodynamic flow field is substantially different from the other arterial sites with predilection of atherosclerosis. In this study, our efforts focused on the effects of arterial motion and local geometry on the hemodynamics of a left anterior descending (LAD) coronary artery before and after clinical intervention to treat the disease. Three-dimensional (3D) arterial segments were reconstructed at 10 phases of the cardiac cycle for both pre- and postintervention based on the fusion of intravascular ultrasound (IVUS) and biplane angiographic images. An arbitrary Lagrangian-Eulerian formulation was used for the computational fluid dynamic analysis. The measured arterial translation was observed to be larger during systole after intervention and more out-of-plane motion was observed before intervention, indicating substantial alterations in the cardiac contraction after angioplasty. The time averaged axial wall shear stress ranged from -0.2 to 9.5 Pa before intervention compared to -0.02 to 3.53 Pa after intervention. Substantial oscillatory shear stress was present in the preintervention flow dynamics compared to that in the postintervention case.

Motivating the masses for family planning in the People's Republic of China.

PubMed

Wang, V L

1975-01-01

China's family planning efforts give the appearance of being substantial and effective, though in terms of hard data the precise degree of success achieved is hard to gauge. The author's five-week tour of China, upon which this article is based, showed a country that seemed capable of controlling its rate of population growth, but it was unclear whether the desired level of growth had in fact been attained. What was clear is that several unusual ingredients are primarily responsible for the marked progress made to date. Foremost among them is a public attitude of strict adherence to a moral code which effectively limits sexual relations to married couples and which encourages delay of marriage well beyond the teenage years. Enhancing this, a wide-ranging State publicity campaign promotes birth control through public address systems, brochures given newlyweds, classes and information provided to expectant parents, discussion groups designed to elicit "voluntary" adoption of birth control methods, and other means. To complement this, the Government provides a nationwide network of free or nearly free family planning services organized down to the local level and fully equipped to assist with contraception, sterilization, or termination of pregnancy upon request. Although general statistics have not been made available, it seems obvious that a substantial reduction in China's potential rate of population growth has been achieved.

Building and Leading the Next Generation of Exploration Launch Vehicles

NASA Technical Reports Server (NTRS)

Cook, Stephen A.; Vanhooser, Teresa

2010-01-01

NASA s Constellation Program is depending on the Ares Projects to deliver the crew and cargo launch capabilities needed to send human explorers to the Moon and beyond. Ares I and V will provide the core space launch capabilities needed to continue providing crew and cargo access to the International Space Station (ISS), and to build upon the U.S. history of human spaceflight to the Moon and beyond. Since 2005, Ares has made substantial progress on designing, developing, and testing the Ares I crew launch vehicle and has continued its in-depth studies of the Ares V cargo launch vehicle. In 2009, the Ares Projects plan to: conduct the first flight test of Ares I, test-fire the Ares I first stage solid rocket motor; build the first integrated Ares I upper stage; continue testing hardware for the J-2X upper stage engine, and continue refining the design of the Ares V cargo launch vehicle. These efforts come with serious challenges for the project leadership team as it continues to foster a culture of ownership and accountability, operate with limited funding, and works to maintain effective internal and external communications under intense external scrutiny.

Endovascular brain intervention and mapping in a dog experimental model using magnetically-guided micro-catheter technology.

PubMed

Kara, Tomas; Leinveber, Pavel; Vlasin, Michal; Jurak, Pavel; Novak, Miroslav; Novak, Zdenek; Chrastina, Jan; Czechowicz, Krzysztof; Belehrad, Milos; Asirvatham, Samuel J

2014-06-01

Despite the substantial progress that has been achieved in interventional cardiology and cardiac electrophysiology, endovascular intervention for the diagnosis and treatment of central nervous system (CNS) disorders such as stroke, epilepsy and CNS malignancy is still limited, particularly due to highly tortuous nature of the cerebral arterial and venous system. Existing interventional devices and techniques enable only limited and complicated access especially into intra-cerebral vessels. The aim of this study was to develop a micro-catheter magnetically-guided technology specifically designed for endovascular intervention and mapping in deep CNS vascular structures. Mapping of electrical brain activity was performed via the venous system on an animal dog model with the support of the NIOBE II system. A novel micro-catheter specially designed for endovascular interventions in the CNS, with the support of the NIOBE II technology, was able to reach safely deep intra-cerebral venous structures and map the electrical activity there. Such structures are not currently accessible using standard catheters. This is the first study demonstrating successful use of a new micro-catheter in combination with NIOBE II technology for endovascular intervention in the brain.

SOCIO-EMOTIONAL AND CHARACTER DEVELOPMENT

PubMed Central

Snyder, Frank J.

2015-01-01

More and more researchers are studying socio-emotional and character development (SECD). The rise and progress in SECD research is encouraging, but there is a critical issue with such a multidisciplinary and fast-developing field: SECD research and evaluation can be more consistent to prevent heterogeneity in definitions and disparate theoretical, measurement, and program models. After summarizing SECD-related literature, I recommend the theory of triadic influence (TTI) as a force to generate consistency and a resource to assist in guiding the design and evaluation of SECD-related programs. The theory fills a gulf in the literature that seeks an ecological theory aligned with SECD-related programs and etiology. The recommendation of the TTI stems from 3 main advantages: (1) The TTI integrates a full range of risk and protective factors in a detailed mediation and moderation framework; (2) it takes a comprehensive view of all the stakeholders in the educational system (i.e., youth, schools, families, and communities); (3) and its utility has been substantiated by empirical evidence from a variety of fields. I discuss applications of the TTI in SECD-related work and suggest improvements for etiology research and the design and evaluation of SECD programs. PMID:26478721

Automotive Thermoelectric Waste Heat Recovery

NASA Astrophysics Data System (ADS)

Meisner, Gregory P.

2015-03-01

Considerable fuel energy, as much as 70%, is not converted to useful work by internal combustion engines but is instead rejected as waste heat, and more than half of the waste heat, nearly 40% of fuel energy, is contained in vehicle exhaust gas. This provides an opportunity to recover some of the wasted fuel energy and convert it from heat into useful work, subject to the laws of thermodynamics, and thereby improve vehicle energy efficiency. Thermoelectric (TE) materials have been extensively researched and TE devices are now being developed for operation at high temperatures corresponding to automotive exhaust gases for direct solid-state conversion of heat into electricity. This has stimulated substantial progress in the development of practical TE generator (TEG) systems for large-scale commercialization. A significant enabler of this progress has been the US Department of Energy's Vehicle Technologies Program through funding for low cost solutions for automotive TE waste heat recovery to improve fuel economy. Our current project at General Motors has culminated in the identification of the potential supply chain for all components and assembly of an automotive TEG. A significant focus has been to develop integrated and iterative modeling tools for a fully optimized TEG design that includes all components and subsystems (TE modules, heat exchangers, thermal interfaces, electrical interconnects, power conditioning, and vehicle integration for maximal use of TEG power). We have built and tested a new, low-cost Initial TEG prototype based on state-of-the-art production-scale skutterudite TE modules, novel heat exchanger designs, and practical solutions to the many technical challenges for optimum TEG performance. We will use the results for our Initial TEG prototype to refine our modeling and design tools for a Final automotive TEG system prototype. Our recent results will be presented. Thanks to: J.R. Salvador, E.R. Gundlach, D. Thompson, N.K. Bucknor, M.G. Reynolds, K. Rober, F.R. Stabler; Marlow, JPL, Dana, Delphi E&S, Eberspaecher, Molycorp, University of Washington, Purdue University, Michigan State University, ORNL, BNL. Supported by US DOE.

Documenting the NICU design dilemma: comparative patient progress in open-ward and single family room units

PubMed Central

Domanico, R; Davis, D K; Coleman, F; Davis, B O

2011-01-01

Objective: To test the efficacy of single family room (SFR) neonatal intensive care unit (NICU) designs, questions regarding patient medical progress and relative patient safety were explored. Addressing these questions would be of value to hospital staff, administrators and designers alike. Study Design: This prospective study documented, by means of Institution Review Board-approved protocols, the progress of patients in two contrasting NICU designs. Noise levels, illumination and air quality measurements were included to define the two NICU physical environments. Result: Infants in the SFR unit had fewer apneic events, reduced nosocomial sepsis and mortality, as well as earlier transitions to enteral nutrition. More mothers sustained stage III lactation, and more infants were discharged breastfeeding in the SFR. Conclusion: This study showed the SFR to be more conducive to family-centered care, and to enhance infant medical progress and breastfeeding success over that of an open ward. PMID:21072040

Does progressive resistance and balance exercise reduce falls in residential aged care? Randomized controlled trial protocol for the SUNBEAM program

PubMed Central

Hewitt, Jennifer; Refshauge, Kathryn M; Goodall, Stephen; Henwood, Timothy; Clemson, Lindy

2014-01-01

Introduction Falls are common among older adults. It is reported that approximately 60% of residents of aged care facilities fall each year. This is a major cause of morbidity and mortality, and a significant burden for health care providers and the health system. Among community dwelling older adults, exercise appears to be an effective countermeasure, but data are limited and inconsistent among studies in residents of aged care communities. This trial has been designed to evaluate whether the SUNBEAM program (Strength and Balance Exercise in Aged Care) reduces falls in residents of aged care facilities. Research question Is the program more effective and cost-effective than usual care for the prevention of falls? Design Single-blinded, two group, cluster randomized trial. Participants and setting 300 residents, living in 20 aged care facilities. Intervention Progressive resistance and balance training under the guidance of a physiotherapist for 6 months, then facility-guided maintenance training for 6 months. Control Usual care. Measurements Number of falls, number of fallers, quality of life, mobility, balance, fear of falling, cognitive well-being, resource use, and cost-effectiveness. Measurements will be taken at baseline, 6 months, and 12 months. Analysis The number of falls will be analyzed using a Poisson mixed model. A logistic mixed model will be used to analyze the number of residents who fall during the study period. Intention-to-treat analysis will be used. Discussion This study addresses a significant shortcoming in aged care research, and has potential to impact upon a substantial health care problem. Outcomes will be used to inform care providers, and guide health care policies. PMID:24591821

Pump Design

NASA Technical Reports Server (NTRS)

1981-01-01

A NASA handbook on a general purpose titanium alloy was used by Sundstrand Corporation in design calculation for casting titanium impellers. Information contributed substantially to improved impeller design.

Learning Space Service Design

ERIC Educational Resources Information Center

Felix, Elliot

2011-01-01

Much progress has been made in creating informal learning spaces that incorporate technology and flexibly support a variety of activities. This progress has been principally in designing the right combination of furniture, technology, and space. However, colleges and universities do not design services within learning spaces with nearly the same…

Spine lesion analysis in 3D CT data - Reporting on research progress

NASA Astrophysics Data System (ADS)

Jan, Jiri; Chmelik, Jiri; Jakubicek, Roman; Ourednicek, Petr; Amadori, Elena; Gavelli, Giampaolo

2018-04-01

The contribution describes progress in the long-term project concerning automatic diagnosis of spine bone lesions. There are two difficult problems: segmenting reliably possibly severely deformed vertebrae in the spine and then detect, segment and classify the lesions that are often hardly visible thus making even the medical expert decisions highly uncertain, with a large inter-expert variety. New approaches are described enabling to solve both problems with a success rate acceptable for clinical testing, at the same time speeding up the process substantially compared to the previous stage. The results are compared with previously published achievements.

2011 Annual Progress Report: DOE Hydrogen and Fuel Cells Program (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In the past year, the DOE Hydrogen and Fuel Cells Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

NASA's Space Launch System: Progress Toward the Proving Ground

NASA Technical Reports Server (NTRS)

Jackman, Angie; Johnson, Les

2017-01-01

With significant and substantial progress being accomplished toward readying the Space Launch System (SLS) rocket for its first test flight, work is already also underway on preparations for the second flight - using an upgraded version of the vehicle - and beyond. SLS is the most powerful human-rated launch vehicle the United States has ever undertaken, and together with the Orion spacecraft will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. This paper will provide a description of the SLS vehicle, and an overview of the vehicle's capabilities and utilization potential.

FY 2014 Annual Progress Report - Advanced Combustion Engine Research and Development (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

Performance Ratings: Designs for Evaluating Their Validity and Accuracy.

DTIC Science & Technology

1986-07-01

ratees with substantial validity and with little bias due to the ethod for rating. Convergent validity and discriminant validity account for approximately...The expanded research design suggests that purpose for the ratings has little influence on the multitrait-multimethod properties of the ratings...Convergent and discriminant validity again account for substantial differences in the ratings of performance. Little method bias is present; both methods of

Initial Business Case Analysis of Two Integrated Heat Pump HVAC Systems for Near-Zero-Energy Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Van D

2006-11-01

The long range strategic goal of the Department of Energy's Building Technologies (DOE/BT) Program is to create, by 2020, technologies and design approaches that enable the construction of net-zero energy homes at low incremental cost (DOE/BT 2005). A net zero energy home (NZEH) is a residential building with greatly reduced needs for energy through efficiency gains, with the balance of energy needs supplied by renewable technologies. While initially focused on new construction, these technologies and design approaches are intended to have application to buildings constructed before 2020 as well resulting in substantial reduction in energy use for all building typesmore » and ages. DOE/BT's Emerging Technologies (ET) team is working to support this strategic goal by identifying and developing advanced heating, ventilating, air-conditioning, and water heating (HVAC/WH) technology options applicable to NZEHs. Although the energy efficiency of heating, ventilating, and air-conditioning (HVAC) equipment has increased substantially in recent years, new approaches are needed to continue this trend. Dramatic efficiency improvements are necessary to enable progress toward the NZEH goals, and will require a radical rethinking of opportunities to improve system performance. The large reductions in HVAC energy consumption necessary to support the NZEH goals require a systems-oriented analysis approach that characterizes each element of energy consumption, identifies alternatives, and determines the most cost-effective combination of options. In particular, HVAC equipment must be developed that addresses the range of special needs of NZEH applications in the areas of reduced HVAC and water heating energy use, humidity control, ventilation, uniform comfort, and ease of zoning. In FY05 ORNL conducted an initial Stage 1 (Applied Research) scoping assessment of HVAC/WH systems options for future NZEHs to help DOE/BT identify and prioritize alternative approaches for further development. Eleven system concepts with central air distribution ducting and nine multi-zone systems were selected and their annual and peak demand performance estimated for five locations: Atlanta (mixed-humid), Houston (hot-humid), Phoenix (hot-dry), San Francisco (marine), and Chicago (cold). Performance was estimated by simulating the systems using the TRNSYS simulation engine (Solar Energy Laboratory et al. 2006) in two 1800-ft{sup 2} houses--a Building America (BA) benchmark house and a prototype NZEH taken from BEopt results at the take-off (or crossover) point (i.e., a house incorporating those design features such that further progress towards ZEH is through the addition of photovoltaic power sources, as determined by current BEopt analyses conducted by NREL). Results were summarized in a project report, 'HVAC Equipment Design options for Near-Zero-Energy Homes--A Stage 2 Scoping Assessment,' ORNL/TM-2005/194 (Baxter 2005). The 2005 study report describes the HVAC options considered, the ranking criteria used, and the system rankings by priority. Table 1 summarizes the energy savings potential of the highest scoring options from the 2005 study for all five locations.« less

Nanostructured electrolytes for stable lithium electrodeposition in secondary batteries.

PubMed

Tu, Zhengyuan; Nath, Pooja; Lu, Yingying; Tikekar, Mukul D; Archer, Lynden A

2015-11-17

Secondary batteries based on lithium are the most important energy storage technology for contemporary portable devices. The lithium ion battery (LIB) in widespread commercial use today is a compromise technology. It compromises high energy, high power, and design flexibility for long cell operating lifetimes and safety. Materials science, transport phenomena, and electrochemistry in the electrodes and electrolyte that constitute such batteries are areas of active study worldwide because significant improvements in storage capacity and cell lifetime are required to meet new demands, including the electrification of transportation and for powering emerging autonomous aircraft and robotics technologies. By replacing the carbonaceous host material used as the anode in an LIB with metallic lithium, rechargeable lithium metal batteries (LMBs) with higher storage capacity and compatibility with low-cost, high-energy, unlithiated cathodes such as sulfur, manganese dioxide, carbon dioxide, and oxygen become possible. Large-scale, commercial deployment of LMBs are today limited by safety concerns associated with unstable electrodeposition and lithium dendrite formation during cell recharge. LMBs are also limited by low cell operating lifetimes due to parasitic chemical reactions between the electrode and electrolyte. These concerns are greater in rechargeable batteries that utilize other, more earth abundant metals such as sodium and to some extent even aluminum. Inspired by early theoretical works, various strategies have been proposed for alleviating dendrite proliferation in LMBs. A commonly held view among these early studies is that a high modulus, solid-state electrolyte that facilitates fast ion transport, is nonflammable, and presents a strong-enough physical barrier to dendrite growth is a requirement for any commercial LMB. Unfortunately, poor room-temperature ionic conductivity, challenging processing, and the high cost of ceramic electrolytes that meet the modulus and stability requirements have to date proven to be insurmountable obstacles to progress. In this Account, we first review recent advances in continuum theory for dendrite growth and proliferation during metal electrodeposition. We show that the range of options for designing electrolytes and separators that stabilize electrodeposition is now substantially broader than one might imagine from previous literature accounts. In particular, separators designed at the nanoscale to constrain ion transport on length scales below a theory-defined cutoff, and structured electrolytes in which a fraction of anions are permanently immobilized to nanoparticles, to a polymer network or ceramic membrane are considered particularly promising for their ability to stabilize electrodeposition of lithium metal without compromising ionic conductivity or room temperature battery operation. We also review recent progress in designing surface passivation films for metallic lithium that facilitate fast deposition of lithium at the electrolyte/electrode interface and at the same time protect the lithium from parasitic side reactions with liquid electrolytes. A promising finding from both theory and experiment is that simple film-forming halide salt additives in a conventional liquid electrolyte can substantially extend the lifetime and safety of LMBs.

Nanostructured Electrolytes for Stable Lithium Electrodeposition in Secondary Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tu, Zhengyuan; Nath, Pooja; Lu, Yingying

Secondary batteries based on lithium are the most important energy storage technology for contemporary portable devices. The lithium ion battery (LIB) in widespread commercial use today is a compromise technology. It compromises high energy, high power, and design flexibility for long cell operating lifetimes and safety. Materials science, transport phenomena, and electrochemistry in the electrodes and electrolyte that constitute such batteries are areas of active study worldwide because significant improvements in storage capacity and cell lifetime are required to meet new demands, including the electrification of transportation and for powering emerging autonomous aircraft and robotics technologies. By replacing the carbonaceousmore » host material used as the anode in an LIB with metallic lithium, rechargeable lithium metal batteries (LMBs) with higher storage capacity and compatibility with low-cost, high-energy, unlithiated cathodes such as sulfur, manganese dioxide, carbon dioxide, and oxygen become possible. Large-scale, commercial deployment of LMBs are today limited by safety concerns associated with unstable electrodeposition and lithium dendrite formation during cell recharge. LMBs are also limited by low cell operating lifetimes due to parasitic chemical reactions between the electrode and electrolyte. These concerns are greater in rechargeable batteries that utilize other, more earth abundant metals such as sodium and to some extent even aluminum. Inspired by early theoretical works, various strategies have been proposed for alleviating dendrite proliferation in LMBs. A commonly held view among these early studies is that a high modulus, solid-state electrolyte that facilitates fast ion transport, is nonflammable, and presents a strong-enough physical barrier to dendrite growth is a requirement for any commercial LMB. Unfortunately, poor room-temperature ionic conductivity, challenging processing, and the high cost of ceramic electrolytes that meet the modulus and stability requirements have to date proven to be insurmountable obstacles to progress. In this Account, we first review recent advances in continuum theory for dendrite growth and proliferation during metal electrodeposition. We show that the range of options for designing electrolytes and separators that stabilize electrodeposition is now substantially broader than one might imagine from previous literature accounts. In particular, separators designed at the nanoscale to constrain ion transport on length scales below a theory-defined cutoff, and structured electrolytes in which a fraction of anions are permanently immobilized to nanoparticles, to a polymer network or ceramic membrane are considered particularly promising for their ability to stabilize electrodeposition of lithium metal without compromising ionic conductivity or room temperature battery operation. We also review recent progress in designing surface passivation films for metallic lithium that facilitate fast deposition of lithium at the electrolyte/electrode interface and at the same time protect the lithium from parasitic side reactions with liquid electrolytes. A promising finding from both theory and experiment is that simple film-forming halide salt additives in a conventional liquid electrolyte can substantially extend the lifetime and safety of LMBs.« less

NACA Conference on Aerodynamic Problems of Transonic Airplane Design

NASA Technical Reports Server (NTRS)

1949-01-01

During the past several years it has been necessary for aeronautical research workers to exert a good portion of their effort in developing the means for conducting research in the high-speed range. The transonic range particularly has presented a very acute problem because of the choking phenomena in wind tunnels at speeds close to the speed of sound. At the same time, the multiplicity of design problems for aircraft introduced by the peculiar flow problems of the transonic speed range has given rise to an enormous demand for detail design data. Substantial progress has been made, however, in developing the required research techniques and in supplying the demand for aerodynamic data required for design purposes. In meeting this demand, it has been necessary to resort to new techniques possessing such novel features that the results obtained have had to be viewed with caution. Furthermore, the kinds of measurements possible with these various techniques are so varied that the correlation of results obtained by different techniques generally becomes an indirect process that can only be accomplished in conjunction with the application of estimates of the extent to which the results of measurements by any given technique are modified by differences that are inherent in the techniques. Thus, in the establishment of the validity and applicability of data obtained by any given technique, direct comparisons between data from different sources are a supplement to but not a substitute for the detailed knowledge required of the characteristics of each technique and fundamental aerodynamic flow phenomena.

Design of multiple sequence alignment algorithms on parallel, distributed memory supercomputers.

PubMed

Church, Philip C; Goscinski, Andrzej; Holt, Kathryn; Inouye, Michael; Ghoting, Amol; Makarychev, Konstantin; Reumann, Matthias

2011-01-01

The challenge of comparing two or more genomes that have undergone recombination and substantial amounts of segmental loss and gain has recently been addressed for small numbers of genomes. However, datasets of hundreds of genomes are now common and their sizes will only increase in the future. Multiple sequence alignment of hundreds of genomes remains an intractable problem due to quadratic increases in compute time and memory footprint. To date, most alignment algorithms are designed for commodity clusters without parallelism. Hence, we propose the design of a multiple sequence alignment algorithm on massively parallel, distributed memory supercomputers to enable research into comparative genomics on large data sets. Following the methodology of the sequential progressiveMauve algorithm, we design data structures including sequences and sorted k-mer lists on the IBM Blue Gene/P supercomputer (BG/P). Preliminary results show that we can reduce the memory footprint so that we can potentially align over 250 bacterial genomes on a single BG/P compute node. We verify our results on a dataset of E.coli, Shigella and S.pneumoniae genomes. Our implementation returns results matching those of the original algorithm but in 1/2 the time and with 1/4 the memory footprint for scaffold building. In this study, we have laid the basis for multiple sequence alignment of large-scale datasets on a massively parallel, distributed memory supercomputer, thus enabling comparison of hundreds instead of a few genome sequences within reasonable time.

Dual renin-angiotensin-aldosterone system blockade for diabetic kidney disease.

PubMed

Pichler, Raimund H; de Boer, Ian H

2010-08-01

Blockade of the renin-angiotensin-aldosterone system (RAAS) prevents the development and progression of diabetic kidney disease (DKD). It is controversial whether the simultaneous use of two RAAS inhibitors (ie, dual RAAS blockade) further improves renal outcomes. This review examines the scientific rationale and current clinical evidence addressing the use of dual RAAS blockade to prevent and treat DKD. It is concluded that dual RAAS blockade should not be routinely applied to patients with low or moderate risk of progressive kidney disease (normoalbuminuria or microalbuminuria with preserved glomerular filtration rate). For patients with high risk of progressive kidney disease (substantial albuminuria or impaired glomerular filtration rate), clinicians should carefully weigh the potential risks and benefits of dual RAAS blockade on an individual basis until ongoing clinical trials provide further insight.

Obesity and heart failure as a mediator of the cerebrorenal interaction.

PubMed

Jindal, Ankur; Whaley-Connell, Adam; Sowers, James R

2013-01-01

The obesity epidemic is contributing substantially to the burden of cardiovascular disease including heart disease and congestive heart failure, in the United States and the rest of the world. Overnutrition as a driver of obesity, promotes alterations in fatty acid, lipid, and glucose metabolism that influence myocardial function and progression of heart failure from diastolic to systolic failure. The association of progressive heart failure and progressive chronic kidney disease is well documented and often referred to as the cardiorenal syndrome, as well as a prognosticator for cerebrovascular disease (e.g. stroke). Whether the relationship between obesity, heart disease/failure and risk for chronic kidney disease and stroke is direct or a confluence of risk factors is poorly understood. Copyright © 2013 S. Karger AG, Basel.

A fishmeal-free diet for post-smolt Atlantic salmon in RAS

USDA-ARS?s Scientific Manuscript database

Rising costs and static supply of ocean-harvested fishmeal have spurred decades of research to identify sustainable feed ingredients for salmon diets. There has been substantial progress. The amount of fishmeal and fish oil used in commercial diets has declined and there is now a long list of altern...

Soil Respiration at Dominant Patch Types within a Managed Northern Wisconsin Landscape

Treesearch

Eug& #233; nie Euskirchen; Jiquan Chen; Eric J. Gustafson; Siyan Ma; Siyan Ma

2003-01-01

Soil respiration (SR), a substantial component of the forest carbon budget, has been studied extensively at the ecosystem, regional, continental, and global scales, but little progress has been made toward understanding SR over managed forest landscapes. Soil respiration is often influenced by soil temperature (Ts), soil moisture (Ms...

Soil respiration at dominant patch types within a managed northern Wisconsin landscape

Treesearch

Eugenie S. Euskirchen; Jiquan Chen; Eric J. Gustafson; Siyan Ma

2003-01-01

Soil respiration (SR), a substantial component of the forest carbon budget, has been studied extensively at the ecosystem, regional, continental, and global scales, but little progress has been made toward understanding SR over managed forest landscapes. Soil respiration is often influenced by soil temperature (Ts), soil moisture (Ms...

Sailing the Stormy Seas: The Illness Experience of Persons with Parkinson's Disease

ERIC Educational Resources Information Center

Stanley-Hermanns, Melinda; Engebretson, Joan

2010-01-01

Parkinson's disease is a chronic, progressive disorder with no known cause or promising cure. While substantial information is known about the pathophysiology, little is known about the illness experience of living with the disease. A qualitative study using an ethnographic approach was conducted to provide a rich understanding of the illness…

Assessing Risk and Opportunity in Conflict Studies: A Human Rights Analysis

ERIC Educational Resources Information Center

Poe, Steven C.; Rost, Nicolas; Carey, Sabine C.

2006-01-01

Over the past two decades, substantial progress has been made toward a theoretical understanding of why physical integrity abuses are committed. Unfortunately, these theoretical developments have been devoid of much practical application. In this article, the authors explore the feasibility of risk assessment in the study of these human rights.…

[Integral assessment of learning subjects difficulties].

PubMed

Grebniak, N P; Shchudro, S A

2010-01-01

The integral criterion for subject difficulties in senior classes is substantiated in terms of progress in studies, variation coefficient, and subjective and expert appraisals of the difficulty of subjects. The compiled regression models adequately determine the difficulty of academic subjects. According to the root-mean-square deviation, all subjects were found to have 3 degrees of difficulty.

ORNL Annual Sustainability Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lapsa, Melissa Voss; Nichols, Teresa A.

2014-02-01

As described in this report, we have made substantial progress across the 25 roadmaps of the Sustainable Campus Initiative. The report also outlines our plans to continue integrating sustainable practices into the planning, execution, and evaluation of all ORNL activities. We appreciate your interest in our journey to sustainability, and we welcome your comments, questions, and suggestions.

Higher Education Research Community in Taiwan: An Emerging Field

ERIC Educational Resources Information Center

Chan, Sheng-Ju; Chan, Ying

2015-01-01

This paper aims to explore the evolution and characteristics of the higher education research community in Taiwan. In echoing the development of the East Asian region, Taiwan has made substantial progress during the past two decades. The massification of higher education itself has played a major role in promoting the academic differentiation or…

Current and innovative pain management techniques in total knee arthroplasty.

PubMed

Dalury, David F; Lieberman, Jay R; Macdonald, Steven J

2012-01-01

Pain management is a major concern for patients contemplating total knee replacement surgery and is one of the leading causes of dissatisfaction after knee replacement. Substantial progress has been made over the past several years in improving pain control after total knee replacement using multimodal pain control, preemptive analgesia, and periarticular injections.

Failure of pheromone traps in detecting incipient populations of boll weevils (Coleoptera: Curculionidae): Investigation of two potential contributing factors

USDA-ARS?s Scientific Manuscript database

Progress towards complete eradication of the boll weevil has been delayed in some areas of Texas due to the inconsistent performance of pheromone traps in detecting incipient weevil populations. In 2008 substantial infestations of boll weevils, Anthonomus grandis Boheman, were detected in several c...

A Comparison of Speech Sound Intervention Delivered by Telepractice and Side-by-Side Service Delivery Models

ERIC Educational Resources Information Center

Grogan-Johnson, Sue; Schmidt, Anna Marie; Schenker, Jason; Alvares, Robin; Rowan, Lynne E.; Taylor, Jacquelyn

2013-01-01

Telepractice has the potential to provide greater access to speech-language intervention services for children with communication impairments. Substantiation of this delivery model is necessary for telepractice to become an accepted alternative delivery model. This study investigated the progress made by school-age children with speech sound…

34 CFR 75.253 - Continuation of a multi-year project after the first budget period.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sufficient funds under the program; (2) The recipient has either— (i) Made substantial progress toward meeting the objectives in its approved application; or (ii) Obtained the Secretary's approval of changes... those objectives in succeeding budget periods; (3) The recipient has submitted all reports as required...

Knowledge Mobilisation in the Polish Education System

ERIC Educational Resources Information Center

Fazlagic, Jan; Erkol, Arif

2015-01-01

Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

Leadership for Learning: Lessons from 40 Years of Empirical Research

ERIC Educational Resources Information Center

Hallinger, Philip

2011-01-01

Purpose: This paper aims to present a research-based model of leadership for learning. It argues that the field has made substantial progress over the past 40 years in identifying ways in which leadership contributes to learning and school improvement. Four specific dimensions of leading for learning are presented: values and beliefs, leadership…

Cold Rolled Steel and Knowledge: What Can Higher Education Learn about Productivity?

ERIC Educational Resources Information Center

Thille, Candace; Smith, Joel

2011-01-01

Higher education is simply not making substantial progress in addressing its most significant challenges: educating an increasingly diverse body of students while containing the cost that is putting postsecondary education beyond the reach of a growing percentage of the world's population. Tweaking long-standing strategies to achieve incremental…

Threshold Concepts in Higher Education: A Synthesis of the Literature Relating to Measurement of Threshold Crossing

ERIC Educational Resources Information Center

Nicola-Richmond, Kelli; Pépin, Geneviève; Larkin, Helen; Taylor, Charlotte

2018-01-01

In relation to teaching and learning approaches that improve student learning outcomes, threshold concepts have generated substantial interest in higher education. They have been described as "portals" that lead to a transformed way of understanding or thinking, enabling learners to progress, and have been enthusiastically adopted to…

Responsible decision-making for plant research and breeding innovations in the European Union.

PubMed

Eriksson, Dennis; Chatzopoulou, Sevasti

2018-01-02

Plant research and breeding has made substantial technical progress over the past few decades, indicating a potential for tremendous societal impact. Due to this potential, the development of policies and legislation on plant breeding and the technical progress should preferably involve all relevant stakeholders. However, we argue here that there is a substantial imbalance in the European Union (EU) regarding the influence of the various stakeholder groups on policy makers. We use evidence from three examples in order to show that the role of science is overlooked: 1) important delays in the decision process concerning the authorization of genetically modified (GM) maize events, 2) the significance attributed to non-scientific reasons in new legislation concerning the prohibition of GM events in EU member states, and 3) failure of the European Commission to deliver legal guidance to new plant breeding techniques despite sufficient scientific evidence and advisory reports. We attribute this imbalance to misinformation and misinterpretation of public perceptions and a disproportionate attention to single outlier reports, and we present ideas on how to establish a better stakeholder balance within this field.

Progress in digestive endoscopy: Flexible Spectral Imaging Colour Enhancement (FICE)-technical review.

PubMed

Negreanu, L; Preda, C M; Ionescu, D; Ferechide, D

2015-01-01

Background. A substantial advance in digestive endoscopy that has been made during the last decade is represented by digital chromoendoscopy, which was developed as a quicker and sometimes better alternative to the gold standard of dye spraying. Fujifilm developed a virtual coloration technique called Flexible spectral Imaging Color Enhancement (FICE). FICE provides a better detection of lesions of "minimal" esophagitis, of dysplasia in Barrett's esophagus and of squamous cell esophageal cancer. The use of FICE resulted in an improvement in the visualization of the early gastric cancer, being less invasive, and time consuming than the classic dye methods. Current evidence does not support FICE for screening purposes in colon cancer but it definitely improves characterization of colonic lesions. Its use in inflammatory bowel disease is still controversial and in video capsule endoscopy is considered a substantial progress. Conclusions. The use of FICE endoscopy in routine clinical practice can increase the diagnostic yield and can provide a better characterization of lesions. Future studies to validate its use, the good choice of channels, and the "perfect indications" and to provide common definitions and classifications are necessary.

Activity of Sorafenib in Recurrent Ovarian Cancer and Primary Peritoneal Carcinomatosis: A Gynecologic Oncology Group Trial

PubMed Central

Matei, Daniela; Sill, Michael W.; Lankes, Heather A.; DeGeest, Koen; Bristow, Robert E.; Mutch, David; Yamada, S. Diane; Cohn, David; Calvert, Valerie; Farley, John; Petricoin, Emanuel F.; Birrer, Michael J.

2011-01-01

Purpose Sorafenib is a kinase inhibitor targeting Raf and other kinases (ie, vascular endothelial growth factor receptor [VEGFR], platelet-derived growth factor receptor [PDGFR], Flt3, and c-KIT). This study assessed its activity and tolerability in patients with recurrent ovarian cancer (OC) or primary peritoneal carcinomatosis (PPC). Methods This open-label, multi-institutional, phase II study used a two-stage design. Eligible patients had persistent or recurrent OC/PPC after one to two prior cytotoxic regimens, and they experienced progression within 12 months of platinum-based therapy. Treatment consisted of sorafenib 400 mg orally twice per day. Primary end points were progression-free survival (PFS) at 6 months and toxicity by National Cancer Institute criteria. Secondary end points were tumor response and duration of PFS and overall survival. Biomarker analyses included measurement of ERK and b-Raf expression in tumors and phosphorylation of ERK (pERK) in peripheral-blood lymphocytes (PBLs) before and after 1 month of treatment. Results Seventy-three patients were enrolled, of which 71 were eligible. Fifty-nine eligible patients (83%) had measurable disease, and 12 (17%) had detectable disease. Significant grade 3 or 4 toxicities included the following: rash (n = 7), hand-foot syndrome (n = 9), metabolic (n = 10), GI (n = 3), cardiovascular (n = 2), and pulmonary (n = 2). Only patients with measurable disease were used to assess efficacy. Fourteen survived progression free for at least 6 months (24%; 90% CI, 15% to 35%). Two patients had partial responses (3.4%; 90% CI, 1% to 10%); 20 had stable disease; 30 had progressive disease; and seven could not have their tumor assessed. ERK and b-Raf were expressed in all tumors. Exploratory analyses indicated that pERK in post-treatment PBL specimens was associated with PFS. Conclusion Sorafenib has modest antitumor activity in patients with recurrent OC, but the activity was at the expense of substantial toxicity. PMID:21098323

Raytheon dual-use long life cryocooler

NASA Astrophysics Data System (ADS)

Kirkconnell, Carl S.; Ross, Bradley A.

2005-05-01

Raytheon has manufactured closed-cycle cryocoolers for both tactical military and space applications for over thirty years. Tactical and space cryocooler technologies have historically been treated as distinct both at Raytheon and throughout the industry. Differing technical requirements, operating lifetimes, and order quantities have driven these types of coolers to dramatically different design approaches and cost levels. For example, a typical space cryocooler system today costs approximately 2M as compared to roughly 10,000 for a tactical cryocooler. However, stimuli from both the tactical and space cooler user communities are driving the markets together. Tactical cryocooler requirements are starting to push towards operating lifetime requirements more characteristic of the space coolers (e.g., 20,000+ hours). Space cryocooler users, in particular Missile Defense Agency, are pushing for substantial cost reduction. In response, Raytheon is developing a low cost space cryocooler with an intended dual-use capability to also serve the tactical marketplace. This cooler leverages proven flexure-suspension technology to achieve long life, and a low cost concentric pulse tube cold head design has been developed that can be packaged into the existing Standard Advanced Dewar Assembly, Type One (SADA-I). The cooler meets or exceeds the SADA-I operational requirements (capacity, efficiency, etc.) as well. For the space-version of the cooler, the electronics cost has been reduced by an estimated 80% versus current designs, largely by approaching the vibration cancellation requirement from a dramatically different perspective. Fabrication of the brassboard expander is nearly complete, and the prototype design is well underway. The design approach, development progress, and proposed applications are presented.

Some Thoughts on "Using Learning Progressions to Design Vertical Scales That Support Coherent Inferences about Student Growth"

ERIC Educational Resources Information Center

Kingston, Neal M.; Broaddus, Angela; Lao, Hongling

2015-01-01

Briggs and Peck (2015) have written a thought-provoking article on the use of learning progressions in the design of vertical scales that support inferences about student growth. Organized learning models, including learning trajectories, learning progressions, and learning maps have been the subject of research for many years, but more recently…

Progressive taxation, income inequality, and happiness.

PubMed

Oishi, Shigehiro; Kushlev, Kostadin; Schimmack, Ulrich

2018-01-01

Income inequality has become one of the more widely debated social issues today. The current article explores the role of progressive taxation in income inequality and happiness. Using historical data in the United States from 1962 to 2014, we found that income inequality was substantially smaller in years when the income tax was more progressive (i.e., a higher tax rate for higher income brackets), even when controlling for variables like stock market performance and unemployment rate. Time lag analyses further showed that higher progressive taxation predicted increasingly lower income inequality up to 5 years later. Data from the General Social Survey (1972-2014; N = 59,599) with U.S. residents (hereafter referred to as "Americans") showed that during years with higher progressive taxation rates, less wealthy Americans-those in the lowest 40% of the income distribution-tended to be happier, whereas the richest 20% were not significantly less happy. Mediational analyses confirmed that the association of progressive taxation with the happiness of less wealthy Americans can be explained by lower income inequality in years with higher progressive taxation. A separate sample of Americans polled online (N = 373) correctly predicted the positive association between progressive taxation and the happiness of poorer Americans but incorrectly expected a strong negative association between progressive taxation and the happiness of richer Americans. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Myths, Artifacts, and Fatal Flaws: Identifying Limitations and Opportunities in Vitamin C Research

PubMed Central

Michels, Alexander J.; Frei, Balz

2013-01-01

Research progress to understand the role of vitamin C (ascorbic acid) in human health has been slow in coming. This is predominantly the result of several flawed approaches to study design, often lacking a full appreciation of the redox chemistry and biology of ascorbic acid. In this review, we summarize our knowledge surrounding the limitations of common approaches used in vitamin C research. In human cell culture, the primary issues are the high oxygen environment, presence of redox-active transition metal ions in culture media, and the use of immortalized cell lines grown in the absence of supplemental ascorbic acid. Studies in animal models are also limited due to the presence of endogenous ascorbic acid synthesis. Despite the use of genetically altered rodent strains lacking synthesis capacity, there are additional concerns that these models do not adequately recapitulate the effects of vitamin C deprivation and supplementation observed in humans. Lastly, several flaws in study design endemic to randomized controlled trials and other human studies greatly limit their conclusions and impact. There also is anecdotal evidence of positive and negative health effects of vitamin C that are widely accepted but have not been substantiated. Only with careful attention to study design and experimental detail can we further our understanding of the possible roles of vitamin C in promoting human health and preventing or treating disease. PMID:24352093

DIVA V2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHEN, JOANNA; SIMIRENKO, LISA; TAPASWI, MANJIRI

The DIVA software interfaces a process in which researchers design their DNA with a web-based graphical user interface, submit their designs to a central queue, and a few weeks later receive their sequence-verified clonal constructs. Each researcher independently designs the DNA to be constructed with a web-based BioCAD tool, and presses a button to submit their designs to a central queue. Researchers have web-based access to their DNA design queues, and can track the progress of their submitted designs as they progress from "evaluation", to "waiting for reagents", to "in progress", to "complete". Researchers access their completed constructs through themore » central DNA repository. Along the way, all DNA construction success/failure rates are captured in a central database. Once a design has been submitted to the queue, a small number of dedicated staff evaluate the design for feasibility and provide feedback to the responsible researcher if the design is either unreasonable (e.g., encompasses a combinatorial library of a billion constructs) or small design changes could significantly facilitate the downstream implementation process. The dedicated staff then use DNA assembly design automation software to optimize the DNA construction process for the design, leveraging existing parts from the DNA repository where possible and ordering synthetic DNA where necessary. SynTrack software manages the physical locations and availability of the various requisite reagents and process inputs (e.g., DNA templates). Once all requisite process inputs are available, the design progresses from "waiting for reagents" to "in progress" in the design queue. Human-readable and machine-parseable DNA construction protocols output by the DNA assembly design automation software are then executed by the dedicated staff exploiting lab automation devices wherever possible. Since the all employed DNA construction methods are sequence-agnostic, standardized (utilize the same enzymatic master mixes and reaction conditions), completely independent DNA construction tasks can be aggregated into the same multi-well plates and pursued in parallel. The resulting sets of cloned constructs can then be screened by high-throughput next-gen sequencing platforms for sequence correctness. A combination of long read-length (e.g., PacBio) and paired-end read platforms (e.g., Illumina) would be exploited depending the particular task at hand (e.g., PacBio might be sufficient to screen a set of pooled constructs with significant gene divergence). Post sequence verification, designs for which at least one correct clone was identified will progress to a "complete" status, while designs for which no correct clones wereidentified will progress to a "failure" status. Depending on the failure mode (e.g., no transformants), and how many prior attempts/variations of assembly protocol have been already made for a given design, subsequent attempts may be made or the design can progress to a "permanent failure" state. All success and failure rate information will be captured during the process, including at which stage a given clonal construction procedure failed (e.g., no PCR product) and what the exact failure was (e.g. assembly piece 2 missing). This success/failure rate data can be leveraged to refine the DNA assembly design process.« less

HER2-positive breast cancer: Current and new therapeutic strategies.

PubMed

Escrivá-de-Romaní, Santiago; Arumí, Miriam; Bellet, Meritxell; Saura, Cristina

2018-06-01

Since the identification of the HER2 receptor amplification as an adverse prognostic factor that defined a special subtype of metastatic breast cancer, there has been a substantial improvement in survival of patients affected with this disease due to the development of anti-HER2 targeted therapies. The approval of trastuzumab and pertuzumab associated to a taxane in first line and subsequent treatment with the antibody-drug conjugate T-DM1 has certainly contributed to achieve these outcomes. The Tyrosine Kinase Inhibitor lapatinib was also approved in the basis of an improvement in progression free survival, becoming another commonly used treatment in combination with capecitabine. Inevitably, despite these therapeutic advances most patients progress on therapy due to primary or acquired resistance or because of an incorrect HER2 positivity assessment. Hence, it is crucial to correctly categorize HER2 amplified tumors and define mechanisms of resistance to design effective new treatment approaches. In addition, identifying biomarkers of response or resistance permits to tailor the therapeutic options for each patient sparing them from unnecessary toxicity as well as improving their outcomes. The aim of this review is to examine new strategies in development to treat HER2-positive metastatic breast cancer referring to the mechanisms of action of new drugs and new combinations including results reported so far. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effects of a classroom intervention with spatial play materials on children's object and viewer transformation abilities.

PubMed

Vander Heyden, Karin M; Huizinga, Mariette; Jolles, Jelle

2017-02-01

Children practice their spatial skills when playing with spatial toys, such as construction materials, board games, and puzzles. Sex and SES differences are observed in the engagement in such spatial play activities at home, which relate to individual differences in spatial performance. The current study investigated the effects of explicitly providing spatial play activities in the school setting on different types of spatial ability. We presented 8- to 10-year-old children with a short and easy-to-adopt classroom intervention comprising a set of different spatial play materials. The design involved a pretest-posttest comparison between the intervention group (n = 70) and a control group without intervention (n = 70). Effects were examined on object transformation ability (i.e., a paper-and-pencil mental rotation and paper folding task) and viewer transformation ability (i.e., a hands-on 3D spatial perspective-taking task). Results showed specific effects: there were no differences between the intervention and control group in progress on the two object transformation tasks. Substantial improvements were found for the intervention group compared to the control group on the viewer transformation task. Training progress was not related to sex and socioeconomic background of the child. These findings support the value of spatial play in the classroom for the spatial development of children between 8 and 10 years of age. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

AIDS vaccines that allow HIV-1 to infect and escape immunologic control: a mathematic analysis of mass vaccination.

PubMed

van Ballegooijen, Marijn; Bogaards, Johannes A; Weverling, Gerrit-Jan; Boerlijst, Maarten C; Goudsmit, Jaap

2003-10-01

Cytotoxic T lymphocyte (CTL)-based HIV vaccine concepts shown to reduce viremia and postpone disease but not to prevent infection in monkeys are currently in human phase 1 trials. To evaluate the potential efficacy of vaccines that cannot prevent HIV-1 to infect and escape immunologic control, we designed a mathematic model that correlates the level of viremia to both infectiousness and disease progression. We speculate that vaccinees will have a virologic set point and disease progression rates comparable to untreated HIV-1-infected individuals with the best prognosis. Our model (illustrated with R0 = 3) shows that a sexually active population can ultimately be reduced to 26% of its initial size as a result of AIDS-related mortality in the absence of treatment or vaccination. Start of vaccination when HIV-1 prevalence is still low might postpone the peak incidence of infection and the dramatic decline in population size by up to 22 years. In conclusion, CTL-based vaccines that do not prevent HIV-1 infection but do postpone the time to onset of AIDS have considerable potential to curb the spread of HIV-1 and to postpone high AIDS-related mortality on a population level. The number of long-term survivors is substantially increased only when vaccination is initiated early in an AIDS epidemic, however.

Successful arrest of photoreceptor and vision loss expands the therapeutic window of retinal gene therapy to later stages of disease

PubMed Central

Beltran, William A.; Cideciyan, Artur V.; Iwabe, Simone; Swider, Malgorzata; Kosyk, Mychajlo S.; McDaid, Kendra; Martynyuk, Inna; Ying, Gui-Shuang; Shaffer, James; Deng, Wen-Tao; Boye, Sanford L.; Lewin, Alfred S.; Hauswirth, William W.; Jacobson, Samuel G.; Aguirre, Gustavo D.

2015-01-01

Inherited retinal degenerations cause progressive loss of photoreceptor neurons with eventual blindness. Corrective or neuroprotective gene therapies under development could be delivered at a predegeneration stage to prevent the onset of disease, as well as at intermediate-degeneration stages to slow the rate of progression. Most preclinical gene therapy successes to date have been as predegeneration interventions. In many animal models, as well as in human studies, to date, retinal gene therapy administered well after the onset of degeneration was not able to modify the rate of progression even when successfully reversing dysfunction. We evaluated consequences of gene therapy delivered at intermediate stages of disease in a canine model of X-linked retinitis pigmentosa (XLRP) caused by a mutation in the Retinitis Pigmentosa GTPase Regulator (RPGR) gene. Spatiotemporal natural history of disease was defined and therapeutic dose selected based on predegeneration results. Then interventions were timed at earlier and later phases of intermediate-stage disease, and photoreceptor degeneration monitored with noninvasive imaging, electrophysiological function, and visual behavior for more than 2 y. All parameters showed substantial and significant arrest of the progressive time course of disease with treatment, which resulted in long-term improved retinal function and visual behavior compared with control eyes. Histology confirmed that the human RPGR transgene was stably expressed in photoreceptors and associated with improved structural preservation of rods, cones, and ON bipolar cells together with correction of opsin mislocalization. These findings in a clinically relevant large animal model demonstrate the long-term efficacy of RPGR gene augmentation and substantially broaden the therapeutic window for intervention in patients with RPGR-XLRP. PMID:26460017

Strategic plan for geriatrics and extended care in the veterans health administration: background, plan, and progress to date.

PubMed

Shay, Kenneth; Hyduke, Barbara; Burris, James F

2013-04-01

The leaders of Geriatrics and Extended Care (GEC) in the Veterans Health Administration (VHA) undertook a strategic planning process that led to approval in 2009 of a multidisciplinary, evidence-guided strategic plan. This article reviews the four goals contained in that plan and describes VHA's progress in addressing them. The goals included transforming the healthcare system to a veteran-centric approach, achieving universal access to a panel of services, ensuring that the Veterans Affair's (VA) healthcare workforce was adequately prepared to manage the needs of the growing elderly veteran population, and integrating continuous improvement into all care enhancements. There has been substantial progress in addressing all four goals. All VHA health care has undergone an extensive transformation to patient-centered care, has enriched the services it can offer caregivers of dependent veterans, and has instituted models to better integrate VA and non-VA cares and services. A range of successful models of geriatric care described in the professional literature has been adapted to VA environments to gauge suitability for broader implementation. An executive-level task force developed a three-pronged approach for enhancing the VA's geriatric workforce. The VHA's performance measurement approaches increasingly include incentives to enhance the quality of management of vulnerable elderly adults in primary care. The GEC strategic plan was intended to serve as a road map for keeping VHA aligned with an ambitious but important long-term vision for GEC services. Although no discrete set of resources was appropriated for fulfillment of the plan's recommendations, this initial report reflects substantial progress in addressing most of its goals. © 2013, Copyright the Authors Journal compilation © 2013, The American Geriatrics Society.

Effect of Ebola Progression on Transmission and Control in Liberia

PubMed Central

Yamin, Dan; Gertler, Shai; Ndeffo-Mbah, Martial L.; Skrip, Laura A.; Fallah, Mosoka; Nyenswah, Tolbert G.; Altice, Frederick L.; Galvani, Alison P.

2015-01-01

Background The Ebola outbreak that is sweeping across West Africa is the largest, most volatile, and deadliest Ebola epidemic ever recorded. Liberia is the most profoundly affected country, with more than 3500 infections and 2000 deaths recorded in the past 3 months. Objective To evaluate the contribution of disease progression and case fatality on transmission and to examine the potential for targeted interventions to eliminate the disease. Design Stochastic transmission model that integrates epidemiologic and clinical data on incidence and case fatality, daily viral load among survivors and nonsurvivors evaluated on the basis of the 2000–2001 outbreak in Uganda, and primary data on contacts of patients with Ebola in Liberia. Setting Montserrado County, Liberia, July to September 2014. Measurements Ebola incidence and case-fatality records from 2014 Liberian Ministry of Health and Social Welfare. Results The average number of secondary infections generated throughout the entire infectious period of a single infected case, R, was estimated as 1.73 (95% CI, 1.66 to 1.83). There was substantial stratification between survivors (RSurvivors), for whom the estimate was 0.66 (CI, 0.10 to 1.69), and nonsurvivors (RNonsurvivors), for whom the estimate was 2.36 (CI, 1.72 to 2.80). The nonsurvivors had the highest risk for transmitting the virus later in the course of disease progression. Consequently, the isolation of 75% of infected individuals in critical condition within 4 days from symptom onset has a high chance of eliminating the disease. Limitation Projections are based on the initial dynamics of the epidemic, which may change as the outbreak and interventions evolve. Conclusion These results underscore the importance of isolating the most severely ill patients with Ebola within the first few days of their symptomatic phase. Primary Funding Source National Institutes of Health. PMID:25347321

How to communicate with patients about future illness progression and end of life: a systematic review

PubMed Central

Parry, Ruth; Land, Victoria; Seymour, Jane

2014-01-01

Background Conversation and discourse analytic research has yielded important evidence about skills needed for effective, sensitive communication with patients about illness progression and end of life. Objectives To: ▸ Locate and synthesise observational evidence about how people communicate about sensitive future matters; ▸ Inform practice and policy on how to provide opportunities for talk about these matters; ▸ Identify evidence gaps. Design Systematic review of conversation/discourse analytic studies of recorded interactions in English, using a bespoke appraisal approach and aggregative synthesis. Results 19 publications met the inclusion criteria. We summarised findings in terms of eight practices: ‘fishing questions’—open questions seeking patients’ perspectives (5/19); indirect references to difficult topics (6/19); linking to what a patient has already said—or noticeably not said (7/19); hypothetical questions (12/19); framing difficult matters as universal or general (4/19); conveying sensitivity via means other than words, for example, hesitancy, touch (4/19); encouraging further talk using means other than words, for example, long silences (2/19); and steering talk from difficult/negative to more optimistic aspects (3/19). Conclusions Practices vary in how strongly they encourage patients to engage in talk about matters such as illness progression and dying. Fishing questions and indirect talk make it particularly easy to avoid engaging—this may be appropriate in some circumstances. Hypothetical questions are more effective in encouraging on-topic talk, as is linking questions to patients’ cues. Shifting towards more ‘optimistic’ aspects helps maintain hope but closes off further talk about difficulties: practitioners may want to delay doing so. There are substantial gaps in evidence. PMID:25344494

Integrated risk and recovery monitoring of ecosystem restorations on contaminated sites

USGS Publications Warehouse

Hooper, Michael J.; Glomb, Stephen J.; Harper, David; Hoelzle, Timothy B.; McIntosh, Lisa M.; Mulligan, David R.

2016-01-01

Ecological restorations of contaminated sites balance the human and ecological risks of residual contamination with the benefits of ecological recovery and the return of lost ecological function and ecosystem services. Risk and recovery are interrelated dynamic conditions, changing as remediation and restoration activities progress through implementation into long-term management and ecosystem maturation. Monitoring restoration progress provides data critical to minimizing residual contaminant risk and uncertainty, while measuring ecological advancement toward recovery goals. Effective monitoring plans are designed concurrently with restoration plan development and implementation and are focused on assessing the effectiveness of activities performed in support of restoration goals for the site. Physical, chemical, and biotic measures characterize progress toward desired structural and functional ecosystem components of the goals. Structural metrics, linked to ecosystem functions and services, inform restoration practitioners of work plan modifications or more substantial adaptive management actions necessary to maintain desired recovery. Monitoring frequency, duration, and scale depend on specific attributes and goals of the restoration project. Often tied to restoration milestones, critical assessment of monitoring metrics ensures attainment of risk minimization and ecosystem recovery. Finally, interpretation and communication of monitoring findings inform and engage regulators, other stakeholders, the scientific community, and the public. Because restoration activities will likely cease before full ecosystem recovery, monitoring endpoints should demonstrate risk reduction and a successional trajectory toward the condition established in the restoration goals. A detailed assessment of the completed project's achievements, as well as unrealized objectives, attained through project monitoring, will determine if contaminant risk has been minimized, if injured resources have recovered, and if ecosystem services have been returned. Such retrospective analysis will allow better planning for future restoration goals and strengthen the evidence base for quantifying injuries and damages at other sites in the future.

Can we predict failure in couple therapy early enough to enhance outcome?

PubMed

Pepping, Christopher A; Halford, W Kim; Doss, Brian D

2015-02-01

Feedback to therapists based on systematic monitoring of individual therapy progress reliably enhances therapy outcome. An implicit assumption of therapy progress feedback is that clients unlikely to benefit from therapy can be detected early enough in the course of therapy for corrective action to be taken. To explore the possibility of using feedback of therapy progress to enhance couple therapy outcome, the current study tested whether weekly therapy progress could detect off-track clients early in couple therapy. In an effectiveness trial of couple therapy, 136 couples were monitored weekly on relationship satisfaction and an expert derived algorithm was used to attempt to predict eventual therapy outcome. As expected, the algorithm detected a significant proportion of couples who did not benefit from couple therapy at Session 3, but prediction was substantially improved at Session 4 so that eventual outcome was accurately predicted for 70% of couples, with little improvement of prediction thereafter. More sophisticated algorithms might enhance prediction accuracy, and a trial of the effects of therapy progress feedback on couple therapy outcome is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Gene–Physical Activity Interactions: Overview of Human Studies

PubMed Central

Rankinen, Tuomo; Bouchard, Claude

2009-01-01

Physical activity level is an important component of the total daily energy expenditure and as such contributes to body weight regulation. A body of data indicates that the level of physical activity plays a role in the risk of excessive weight gain, in weight loss programs, and particularly in the prevention of weight regain. Most studies dealing with potential gene–physical activity interaction effects use an exercise and fitness or performance paradigm as opposed to an obesity-driven model. From these studies, it is clear that there are considerable individual differences in the response to an exercise regimen and that there is a substantial familial aggregation component to the observed heterogeneity. Few studies have focused on the role of specific genes in accounting for the highly prevalent gene–exercise interaction effects. Results for specific genes have been inconsistent with few exceptions. Progress is likely to come when studies will be designed to truly address gene–exercise or physical activity interaction issues and with sample sizes that will provide adequate statistical power. PMID:19037212

Incentives for small clubs of Arctic countries to limit black carbon and methane emissions

NASA Astrophysics Data System (ADS)

Aakre, Stine; Kallbekken, Steffen; Van Dingenen, Rita; Victor, David G.

2018-01-01

Although addressing climate change will ultimately require global cooperation, substantial progress may be achieved through small clubs of countries, where it is easier to forge and implement deals needed for policy coordination. Here we quantify the gains from cooperation in the Arctic region and find that nearly 90% of the potential for abating black carbon can be reached by countries acting in self-interest alone because soot, the main source of black carbon, causes severe harm to human health along with warming. Abating methane, by contrast, requires more cooperation because impacts are more diffused geographically. Well-designed clubs with as few as four members can realize more than 80% of the full group cooperation potential for reducing these pollutants. The pivotal player in every effective club is Russia—most other members of the Arctic Council, the institution most focused on advancing the collective interests of the region, offer little leverage on the problems at hand.

Strategy for earth explorers in global earth sciences

NASA Technical Reports Server (NTRS)

1988-01-01

The goal of the current NASA Earth System Science initiative is to obtain a comprehensive scientific understanding of the Earth as an integrated, dynamic system. The centerpiece of the Earth System Science initiative will be a set of instruments carried on polar orbiting platforms under the Earth Observing System program. An Earth Explorer program can open new vistas in the earth sciences, encourage innovation, and solve critical scientific problems. Specific missions must be rigorously shaped by the demands and opportunities of high quality science and must complement the Earth Observing System and the Mission to Planet Earth. The committee believes that the proposed Earth Explorer program provides a substantial opportunity for progress in the earth sciences, both through independent missions and through missions designed to complement the large scale platforms and international research programs that represent important national commitments. The strategy presented is intended to help ensure the success of the Earth Explorer program as a vital stimulant to the study of the planet.

Ultrasonic Evaluation of Fatigue Damage

NASA Astrophysics Data System (ADS)

Bayer, P.; Singher, L.; Notea, A.

2004-02-01

Despite the fact that most engineers and designers are aware of fatigue, many severe breakdowns of industrial plant and machinery still occur due to fatigue. In effect, it's been estimated that fatigue causes at least 80% of the failures in modern engineering components. From an operational point of view, the detection of fatigue damage, preferably at a very early stage, is a critically important consideration in order to prevent possible catastrophic equipment failure and associated losses. This paper describes the investigation involving the use of ultrasonic waves as a potential tool for early detection of fatigue damage. The parameters investigated were the ultrasonic wave velocities (longitudinal and transverse waves) and attenuation coefficient before fatigue damage and after progressive stages of fatigue. Although comparatively small uncertainties were observed, the feasibility of utilizing the velocity of ultrasonic waves as a fatigue monitor was barely substantiated within actual research conditions. However, careful measurements of the ultrasonic attenuation parameter had demonstrated its potential to provide an early assessment of damage during fatigue.

Laser-plasma interaction experiments and diagnostics at NRL (Naval Research Laboratory). Memorandum report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ripin, B.H.; Grun, J.; Herbst, M.J.

Laser plasma interaction experiments have now advanced to the point where very quantitative measurements are required to elucidate the physic issues important for laser fusion and other applications. Detailed time-resolved knowledge of the plasma density, temperature, velocity gradients, spatial structure, heat flow characteristics, radiation emission, etc, are needed over tremendou ranges of plasma density and temperature. Moreover, the time scales are very short, aggrevating the difficulty of the measurements further. Nonetheless, such substantial progress has been made in diagnostic development during the past few years that we are now able to do well diagnosed experiments. In this paper the authorsmore » review recent diagnostic developments for laser-plasma interactions, outline their regimes of applicability, and show examples of their utility. In addition to diagnostics for the high densities and temperature characteristic of laser fusion physics studies, diagnostics designed to study the two-stream interactions of laser created plasma flowing through an ambient low density plasma will be described.« less

The Applications of Model-Based Geostatistics in Helminth Epidemiology and Control

PubMed Central

Magalhães, Ricardo J. Soares; Clements, Archie C.A.; Patil, Anand P.; Gething, Peter W.; Brooker, Simon

2011-01-01

Funding agencies are dedicating substantial resources to tackle helminth infections. Reliable maps of the distribution of helminth infection can assist these efforts by targeting control resources to areas of greatest need. The ability to define the distribution of infection at regional, national and subnational levels has been enhanced greatly by the increased availability of good quality survey data and the use of model-based geostatistics (MBG), enabling spatial prediction in unsampled locations. A major advantage of MBG risk mapping approaches is that they provide a flexible statistical platform for handling and representing different sources of uncertainty, providing plausible and robust information on the spatial distribution of infections to inform the design and implementation of control programmes. Focussing on schistosomiasis and soil-transmitted helminthiasis, with additional examples for lymphatic filariasis and onchocerciasis, we review the progress made to date with the application of MBG tools in large-scale, real-world control programmes and propose a general framework for their application to inform integrative spatial planning of helminth disease control programmes. PMID:21295680

Development of respiratory syncytial virus (RSV) vaccines for infants.

PubMed

Gerretsen, Hannah E; Sande, Charles J

2017-06-01

2017 will mark the 60 th anniversary since the first isolation of RSV in children. In spite of concerted efforts over all these years, the goal of developing an effective vaccine against paediatric RSV disease has remained elusive. One of the main hurdles standing in the way of an effective vaccine is the fact that the age incidence of severe disease peaks within the first 3 months of life, providing limited opportunity for intervention. In addition to this complexity, the spectre of failed historical vaccines, which increased the risk of illness and death upon subsequent natural infection, has substantially increased the safety criteria against which modern vaccines will be assessed. This review traces the history of RSV vaccine development for young infants and analyses the potential reasons for the failure of historic vaccines. It also discusses recent breakthroughs in vaccine antigen design and the progressive evolution of platforms for the delivery of these antigens to seronegative infants. © 2017 The British Infection Association. Published by Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gottesfeld, Shimshon; Dekel, Dario R.; Page, Miles

The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. Here in this perspective article, we describe the current status of AEMFCs as having reached beginningmore » of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. Finally, these perspectives may provide useful insights for the development of next-generation of AEMFCs.« less

Writing-to-Learn in Undergraduate Science Education: A Community-Based, Conceptually Driven Approach

PubMed Central

Reynolds, Julie A.; Thaiss, Christopher; Katkin, Wendy; Thompson, Robert J.

2012-01-01

Despite substantial evidence that writing can be an effective tool to promote student learning and engagement, writing-to-learn (WTL) practices are still not widely implemented in science, technology, engineering, and mathematics (STEM) disciplines, particularly at research universities. Two major deterrents to progress are the lack of a community of science faculty committed to undertaking and applying the necessary pedagogical research, and the absence of a conceptual framework to systematically guide study designs and integrate findings. To address these issues, we undertook an initiative, supported by the National Science Foundation and sponsored by the Reinvention Center, to build a community of WTL/STEM educators who would undertake a heuristic review of the literature and formulate a conceptual framework. In addition to generating a searchable database of empirically validated and promising WTL practices, our work lays the foundation for multi-university empirical studies of the effectiveness of WTL practices in advancing student learning and engagement. PMID:22383613

Evolution in Medicinal Chemistry of Ursolic Acid Derivatives as Anticancer Agents

PubMed Central

Chen, Haijun; Gao, Yu; Wang, Ailan; Zhou, Xiaobin; Zheng, Yunquan; Zhou, Jia

2015-01-01

Currently, there is a renewed interest in common dietaries and plant-based traditional medicines for the prevention and treatment of cancer. In the search for potential anticancer agents from natural sources, ursolic acid (UA), a pentacyclic triterpenoid widely found in various medicinal herbs and fruits, exhibits powerful biological effects including its attractive anticancer activity against various types of cancer cells. However, the limited solubility, rapid metabolism and poor bioavailability of UA restricted its further clinical applications. In the past decade, with substantial progress toward the development of new chemical entities for the treatment of cancer, numerous UA derivatives have been designed and prepared to overcome its disadvantages. Despite extensive effort, discovery of effective UA derivatives has so far met with only limited success. This review summarizes the current status of the structural diversity and evolution in medicinal chemistry of UA analogues and provides a detailed discussion of future direction for further research in the chemical modifications of UA. PMID:25617694

Development of “-omics” research in Schistosoma spp. and -omics-based new diagnostic tools for schistosomiasis

PubMed Central

Wang, Shuqi; Hu, Wei

2014-01-01

Schistosomiasis, caused by dioecious flatworms in the genus Schistosoma, is torturing people from many developing countries nowadays and frequently leads to severe morbidity and mortality of the patients. Praziquantel based chemotherapy and morbidity control for this disease adopted currently necessitate viable and efficient diagnostic technologies. Fortunately, those “-omics” researches, which rely on high-throughput experimental technologies to produce massive amounts of informative data, have substantially contributed to the exploitation and innovation of diagnostic tools of schistosomiasis. In its first section, this review provides a concise conclusion on the progresses pertaining to schistosomal “-omics” researches to date, followed by a comprehensive section on the diagnostic methods of schistosomiasis, especially those innovative ones based on the detection of antibodies, antigens, nucleic acids, and metabolites with a focus on those achievements inspired by “-omics” researches. Finally, suggestions about the design of future diagnostic tools of schistosomiasis are proposed, in order to better harness those data produced by “-omics” studies. PMID:25018752

Molecular engineering with artificial atoms: designing a material platform for scalable quantum spintronics and photonics

NASA Astrophysics Data System (ADS)

Doty, Matthew F.; Ma, Xiangyu; Zide, Joshua M. O.; Bryant, Garnett W.

2017-09-01

Self-assembled InAs Quantum Dots (QDs) are often called "artificial atoms" and have long been of interest as components of quantum photonic and spintronic devices. Although there has been substantial progress in demonstrating optical control of both single spins confined to a single QD and entanglement between two separated QDs, the path toward scalable quantum photonic devices based on spins remains challenging. Quantum Dot Molecules, which consist of two closely-spaced InAs QDs, have unique properties that can be engineered with the solid state analog of molecular engineering in which the composition, size, and location of both the QDs and the intervening barrier are controlled during growth. Moreover, applied electric, magnetic, and optical fields can be used to modulate, in situ, both the spin and optical properties of the molecular states. We describe how the unique photonic properties of engineered Quantum Dot Molecules can be leveraged to overcome long-standing challenges to the creation of scalable quantum devices that manipulate single spins via photonics.

A new approach to tag design in dolphin telemetry: Computer simulations to minimise deleterious effects

NASA Astrophysics Data System (ADS)

Pavlov, V. V.; Wilson, R. P.; Lucke, K.

2007-02-01

Remote-sensors and transmitters are powerful devices for studying cetaceans at sea. However, despite substantial progress in microelectronics and miniaturisation of systems, dolphin tags are imperfectly designed; additional drag from tags increases swim costs, compromises swimming capacity and manoeuvrability, and leads to extra loads on the animal's tissue. We propose a new approach to tag design, elaborating basic principles and incorporating design stages to minimise device effects by using computer-aided design. Initially, the operational conditions of the device are defined by quantifying the shape, hydrodynamics and range of the natural deformation of the dolphin body at the tag attachment site (such as close to the dorsal fin). Then, parametric models of both of the dorsal fin and a tag are created using the derived data. The link between parameters of the fin and a tag model allows redesign of tag models according to expected changes of fin geometry (difference in fin shape related with species, sex, and age peculiarities, simulation of the bend of the fin during manoeuvres). A final virtual modelling stage uses iterative improvement of a tag model in a computer fluid dynamics (CFD) environment to enhance tag performance. This new method is considered as a suitable tool of tag design before creation of the physical model of a tag and testing with conventional wind/water tunnel technique. Ultimately, tag materials are selected to conform to the conditions identified by the modelling process and thus help create a physical model of a tag, which should minimise its impact on the animal carrier and thus increase the reliability and quality of the data obtained.

Innovative vitrification for soil remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jetta, N.W.; Patten, J.S.; Hart, J.G.

1995-12-01

The objective of this DOE demonstration program is to validate the performance and operation of the Vortec Cyclone Melting System (CMS{trademark}) for the processing of LLW contaminated soils found at DOE sites. This DOE vitrification demonstration project has successfully progressed through the first two phases. Phase 1 consisted of pilot scale testing with surrogate wastes and the conceptual design of a process plant operating at a generic DOE site. The objective of Phase 2, which is scheduled to be completed the end of FY 95, is to develop a definitive process plant design for the treatment of wastes at amore » specific DOE facility. During Phase 2, a site specific design was developed for the processing of LLW soils and muds containing TSCA organics and RCRA metal contaminants. Phase 3 will consist of a full scale demonstration at the DOE gaseous diffusion plant located in Paducah, KY. Several DOE sites were evaluated for potential application of the technology. Paducah was selected for the demonstration program because of their urgent waste remediation needs as well as their strong management and cost sharing financial support for the project. During Phase 2, the basic nitrification process design was modified to meet the specific needs of the new waste streams available at Paducah. The system design developed for Paducah has significantly enhanced the processing capabilities of the Vortec vitrification process. The overall system design now includes the capability to shred entire drums and drum packs containing mud, concrete, plastics and PCB`s as well as bulk waste materials. This enhanced processing capability will substantially expand the total DOE waste remediation applications of the technology.« less

A matched-pair comparison of inlay and onlay trochlear designs for patellofemoral arthroplasty: no differences in clinical outcome but less progression of osteoarthritis with inlay designs.

PubMed

Feucht, Matthias J; Cotic, Matthias; Beitzel, Knut; Baldini, Julia F; Meidinger, Gebhart; Schöttle, Philip B; Imhoff, Andreas B

2017-09-01

To compare clinical and radiographic results after isolated patellofemoral arthroplasty (PFA) using either a second-generation inlay or onlay trochlear design. The hypothesis was that an inlay design will produce better clinical results and less progression of tibiofemoral osteoarthritis (OA) compared to an onlay design. Fifteen consecutive patients undergoing isolated PFA with an onlay design trochlear component (Journey™ PFJ, Smith & Nephew) were matched with 15 patients after isolated PFA with an inlay design trochlear component (HemiCAP ® Wave, Arthrosurface). Matching criteria were age, gender, body mass index, and follow-up period. An independent observer evaluated patients prospectively, whereas data were compared retrospectively. Clinical outcome was assessed using WOMAC, Lysholm score, and pain VAS. Kellgren-Lawrence grading was used to assess progression of tibiofemoral OA. Conversion to total knee arthroplasty was necessary in one patient within each group, leaving 14 patients per group for final evaluation. The mean follow-up was 26 months in the inlay group and 25 months in the onlay group (n.s.). Both groups displayed significant improvements of all clinical scores (p < 0.05). No significant differences were found between the two groups with regard to the clinical outcome and reoperation rate. No significant progression of tibiofemoral OA was observed in the inlay group, whereas 53 % of the onlay group showed progression of medial and/or lateral tibiofemoral OA (p = 0.009). Isolated PFA using either a second-generation inlay or onlay trochlear component significantly improves functional outcome scores and pain. The theoretical advantages of an inlay design did not result in better clinical outcome scores; however, progression of tibiofemoral OA was significantly less common in patients with an inlay trochlear component. This implant design may therefore improve long-term results and survival rates after isolated PFA. III.

Accounting for water quality in monitoring access to safe drinking-water as part of the Millennium Development Goals: lessons from five countries.

PubMed

Bain, Rob E S; Gundry, Stephen W; Wright, Jim A; Yang, Hong; Pedley, Steve; Bartram, Jamie K

2012-03-01

To determine how data on water source quality affect assessments of progress towards the 2015 Millennium Development Goal (MDG) target on access to safe drinking-water. Data from five countries on whether drinking-water sources complied with World Health Organization water quality guidelines on contamination with thermotolerant coliform bacteria, arsenic, fluoride and nitrates in 2004 and 2005 were obtained from the Rapid Assessment of Drinking-Water Quality project. These data were used to adjust estimates of the proportion of the population with access to safe drinking-water at the MDG baseline in 1990 and in 2008 made by the Joint Monitoring Programme for Water Supply and Sanitation, which classified all improved sources as safe. Taking account of data on water source quality resulted in substantially lower estimates of the percentage of the population with access to safe drinking-water in 2008 in four of the five study countries: the absolute reduction was 11% in Ethiopia, 16% in Nicaragua, 15% in Nigeria and 7% in Tajikistan. There was only a slight reduction in Jordan. Microbial contamination was more common than chemical contamination. The criterion used by the MDG indicator to determine whether a water source is safe can lead to substantial overestimates of the population with access to safe drinking-water and, consequently, also overestimates the progress made towards the 2015 MDG target. Monitoring drinking-water supplies by recording both access to water sources and their safety would be a substantial improvement.

Modifications of the mouse bone marrow microenvironment favor angiogenesis and correlate with disease progression from asymptomatic to symptomatic multiple myeloma

PubMed Central

Calcinotto, Arianna; Ponzoni, Maurilio; Ria, Roberto; Grioni, Matteo; Cattaneo, Elena; Villa, Isabella; Sabrina Bertilaccio, Maria Teresa; Chesi, Marta; Rubinacci, Alessandro; Tonon, Giovanni; Bergsagel, P Leif; Vacca, Angelo; Bellone, Matteo

2015-01-01

While multiple myeloma (MM) is almost invariably preceded by asymptomatic monoclonal gammopathy of undetermined significance (MGUS) and/or smoldering MM (SMM), the alterations of the bone marrow (BM) microenvironment that establish progression to symptomatic disease are circumstantial. Here we show that in Vk*MYC mice harboring oncogene-driven plasma cell proliferative disorder, disease appearance associated with substantial modifications of the BM microenvironment, including a progressive accumulation of both CD8+ and CD4+ T cells with a dominant T helper type 1 (Th1) response. Progression from asymptomatic to symptomatic MM was characterized by further BM accrual of T cells with reduced Th1 and persistently increased Th2 cytokine production, which associated with accumulation of CD206+Tie2+ macrophages, and increased pro-angiogenic cytokines and microvessel density (MVD). Notably, MVD was also increased at diagnosis in the BM of MGUS and SMM patients that subsequently progressed to MM when compared with MGUS and SMM that remained quiescent. These findings suggest a multistep pathogenic process in MM, in which the immune system may contribute to angiogenesis and disease progression. They also suggest initiating a large multicenter study to investigate MVD in asymptomatic patients as prognostic factor for the progression and outcome of this disease. PMID:26155424

Calculating the costs of work-based training: the case of NHS Cadet Schemes.

PubMed

Norman, Ian; Normand, Charles; Watson, Roger; Draper, Jan; Jowett, Sandra; Coster, Samantha

2008-09-01

The worldwide shortage of registered nurses [Buchan, J., Calman, L., 2004. The Global Shortage of Registered Nurses: An Overview of Issues And Actions. International Council of Nurses, Geneva] points to the need for initiatives which increase access to the profession, in particular, to those sections of the population who traditionally do not enter nursing. This paper reports findings on the costs associated with one such initiative, the British National Health Service (NHS) Cadet Scheme, designed to provide a mechanism for entry into nurse training for young people without conventional academic qualifications. The paper illustrates an approach to costing work-based learning interventions which offsets the value attributed to trainees' work against their training costs. To provide a preliminary evaluation of the cost of the NHS Cadet Scheme initiative. Questionnaire survey of the leaders of all cadet schemes in England (n=62, 100% response) in December 2002 to collect financial information and data on progression of cadets through the scheme, and a follow-up questionnaire survey of the same scheme leaders to improve the quality of information, which was completed in January 2004 (n=56, 59% response). The mean cost of producing a cadet to progress successfully through the scheme and onto a pre-registration nursing programme depends substantially on the value of their contribution to healthcare work during training and the progression rate of students through the scheme. The findings from this evaluation suggest that these factors varied very widely across the 62 schemes. Established schemes have, on average, lower attrition and higher progression rates than more recently established schemes. Using these rates, we estimate that on maturity, a cadet scheme will progress approximately 60% of students into pre-registration nurse training. As comparative information was not available from similar initiatives that provide access to nurse training, it was not possible to calculate the cost effectiveness of NHS Cadet Schemes. However, this study does show that those cadet schemes which have the potential to offer better value for money, are those where the progression rates are good and where the practical training of cadets is organised such that cadets meet the needs of patients which might otherwise have to be met by non-professionally qualified staff.

Progress in Organization Development Research.

ERIC Educational Resources Information Center

Roberts, Nancy C.; Porras, Jerry I.

1982-01-01

Describes major areas of progress in organization development (OD): progress in operationalizing the concept of change; progress in improving measurement; and progress in designing statistical procedures used to analyze OD intervention data. Suggests recent research developments point to a more solid base on which to build OD practice and theory.…

Investing in Equal Opportunity: What Would It Take to Build the Balance Wheel?

ERIC Educational Resources Information Center

Rice, Jennifer King

2015-01-01

More than 150 years ago Horace Mann persuasively reasoned that education is the "balance wheel" of the social structure. He argued that education should be free and universal. While much progress has been made in establishing a universal education system since Mann spoke those words, substantial disparities in educational resources,…

Empirically Guided Coordination of Multiple Evidence-Based Treatments: An Illustration of Relevance Mapping in Children's Mental Health Services

ERIC Educational Resources Information Center

Chorpita, Bruce F.; Bernstein, Adam; Daleiden, Eric L.

2011-01-01

Objective: Despite substantial progress in the development and identification of psychosocial evidence-based treatments (EBTs) in mental health, there is minimal empirical guidance for selecting an optimal "set" of EBTs maximally applicable and generalizable to a chosen service sample. Relevance mapping is a proposed methodology that…

Southern forest resource conditions and management practices from 1950-2000: Benefits of research

Treesearch

Jacek P. Siry

2004-01-01

Over the past five decades, research progress and implementation have been the leading factors supporting the rapid development of southern forestry. The South has become the leading timber-supplying region in the United States, taking advantage of a large accumulation of growing stock and a substantial investment in intensive, research-based management treatments....

A comparison of two rodent repellents in broadcast seeding Douglas-fir.

Treesearch

Edward J. Dimock

1957-01-01

Broadcast seeding of cutover lands is a promising, yet still problematical, means of tree regeneration. Substantial progress has been made since 1950, particularly with the introduction of new rodenticides and repellents suitable for direct application to the seed. One of these is tetramine (tetramethylene disulpho tetramine), a highly lethal repellent that has shown...

Comparison of matrix effects on phytate analysis in Mehlich-3 and Alkaline-EDTA extracts by ICP, NMR, Chromatography and (HRAM) Mass Spectrometry.

USDA-ARS?s Scientific Manuscript database

Phosphorus (P) is a leading cause of water quality degradation in impaired fresh water systems. Although substantial progress has been made in understanding the fate and transport of P from nonpoint agricultural sources based on measures of total P and orthophosphate-P, a comprehensive understanding...

First-Year Seminar Intervention: Enhancing First-Year Mathematics Performance at the University of Johannesburg

ERIC Educational Resources Information Center

Jacobs, Melanie; Pretorius, Estherna

2016-01-01

South Africa has opened up access to higher education over the past 20 years. The massive increase in enrolments (with almost 70% first-generation students) substantially affects progress and graduation rates in Science programmes in higher education. First-year students in Science realise that university mathematics requires knowledge and skills…

The U.S. Partnership for Education for Sustainable Development: Progress and Challenges Ahead

ERIC Educational Resources Information Center

Rowe, Debra; Gentile, Susan Jane; Clevey, Lilah

2015-01-01

There has been substantial growth in Education for Sustainability (EfS) in the United States over the past 10 years. Efforts within higher education have created thousands of new programs, majors, minors, specializations, certificates, and across-the-curricula integrations of sustainability learning with an emphasis on real-world problem-solving…

Engineering in Scotland's Colleges: A Report by HM Inspectors for the Scottish Funding Council

ERIC Educational Resources Information Center

Her Majesty's Inspectorate of Education, 2007

2007-01-01

Engineering has played an important role in Scotland's industrial history. Over the years, the skills requirements of industry have changed as the technology has progressed and the industrial base of the country has developed. Over the past decade, there have been substantial changes in the employment opportunities for people with engineering…

Racial-Ethnic Differences at the Intersection of Math Course-Taking and Achievement

ERIC Educational Resources Information Center

Riegle-Crumb, Catherine; Grodsky, Eric

2010-01-01

Despite increases in the representation of African American and Hispanic youth in advanced math courses in high school over the past two decades, recent national reports indicate that substantial inequality in achievement remains. These inequalities can temper one's optimism about the degree to which the United States has made real progress toward…

Making Progress Toward Graduation: Evidence from the Talent Development High School Model

ERIC Educational Resources Information Center

Kemple, James J.; Herlihy, Corinne M.; Smith, Thomas J.

2005-01-01

In low-performing public high schools in U.S. cities, high proportions of students drop out, students who stay in school typically do not succeed academically, and efforts to make substantial reforms often meet with little success. The Talent Development High School model is a comprehensive school reform initiative that has been developed to…

Challenge and Change in Appalachia: The Story of Hindman Settlement School.

ERIC Educational Resources Information Center

Stoddart, Jess

Founded in 1902 by Katherine Pettit and May Stone, the Hindman Settlement School in Knott County, Kentucky, grew out of the Progressive movement. During the golden age of the school, 1915-32, the reputation of its academic program, health work, and other settlement activities brought substantial renown and influence to the school and its founders.…

Effect of an Arabic Program of Direct Instruction for Phonological Awareness on Phonological Awareness Abilities

ERIC Educational Resources Information Center

Elhoweris, Hala; Alsheikh, Negmeldin; Al Mekhlafi, Abdurrahman; Alhosani, Najwa; Alzyoudi, Mohammad

2017-01-01

Reading in Arabic is a vital skill for academic success and progress in the United Arab Emirates (UAE) elementary schools and beyond. However, there is substantial evidence to suggest that a significant number of UAE children in lower elementary grades experience difficulties in reading school-related materials. Research in reading has clearly…

Factors That Affect South African Reading Literacy Achievement: Evidence from prePIRLS 2011

ERIC Educational Resources Information Center

van Staden, Surette; Bosker, Roel

2014-01-01

This study aims to identify factors that predict reading literacy achievement among Grade 4 learners in South Africa by utilising aspects of Carroll's model of school learning. The study draws on the preProgress in International Reading Literacy Study (prePIRLS) 2011 data, which places South African Grade 4 learners' results substantially below…

Fragmented Foundations: Education and Chronic Crisis in the Occupied Palestinian Territory

ERIC Educational Resources Information Center

Nicolai, Susan

2007-01-01

This study explores the setting up and development of the first Palestinian-led education system, from 1994 to 2005. Given the context of chronic crisis, and the immensity of the endeavour, the Palestinians have made substantial progress in a relatively short time. However, the Palestinian education story does not end here. The author looks at…

A Longitudinal Examination of Students' Health Behaviours during Their First Year at University

ERIC Educational Resources Information Center

Gibson, Ann-Marie; Shaw, Johanna; Hewitt, Allan; Easton, Chris; Robertson, Sarah; Gibson, Neil

2018-01-01

During the transition from school to higher education, young adults experience a substantial amount of change where they progress from the highly controlled setting of school to the autonomous and self-motivated environment of university. Time spent at university is considered a critical period during which young adults establish a clear sense of…

49 CFR 213.337 - Defective rails.

Code of Federal Regulations, 2010 CFR

2010-10-01

... crystalline center or nucleus inside the head from which it spreads outward as a smooth, bright, or dark... a smooth, bright, or dark surface progressing until substantially at a right angle to the length of... through it. A crack or rust streak may show under the head close to the web or pieces may be split off the...

49 CFR 213.337 - Defective rails.

Code of Federal Regulations, 2011 CFR

2011-10-01

... crystalline center or nucleus inside the head from which it spreads outward as a smooth, bright, or dark... a smooth, bright, or dark surface progressing until substantially at a right angle to the length of... through it. A crack or rust streak may show under the head close to the web or pieces may be split off the...

49 CFR 213.337 - Defective rails.

Code of Federal Regulations, 2013 CFR

2013-10-01

... crystalline center or nucleus inside the head from which it spreads outward as a smooth, bright, or dark... a smooth, bright, or dark surface progressing until substantially at a right angle to the length of... through it. A crack or rust streak may show under the head close to the web or pieces may be split off the...

49 CFR 213.337 - Defective rails.

Code of Federal Regulations, 2012 CFR

2012-10-01

... crystalline center or nucleus inside the head from which it spreads outward as a smooth, bright, or dark... a smooth, bright, or dark surface progressing until substantially at a right angle to the length of... through it. A crack or rust streak may show under the head close to the web or pieces may be split off the...

49 CFR 213.337 - Defective rails.

Code of Federal Regulations, 2014 CFR

2014-10-01

... crystalline center or nucleus inside the head from which it spreads outward as a smooth, bright, or dark... a smooth, bright, or dark surface progressing until substantially at a right angle to the length of... through it. A crack or rust streak may show under the head close to the web or pieces may be split off the...

Work-Related Health Limitations, Education, and the Risk of Marital Disruption

ERIC Educational Resources Information Center

Teachman, Jay

2010-01-01

Despite progress in identifying the covariates of divorce, there remain substantial gaps in the knowledge. One of these gaps is the relationship between health and risk of marital dissolution. I extend prior research by examining the linkages between work-related health limitations and divorce using 25 years of data (N = 7919) taken from the 1979…

The Effects of Relaxation Training with Cognitive or Nondirective Therapy and the Role of Relaxation-Induced Anxiety in the Treatment of Generalized Anxiety.

ERIC Educational Resources Information Center

Borkovec, T. D.; And Others

1987-01-01

Provided 30 volunteers with generalized anxiety disorder with training in progressive muscle relaxation. Clients were also given cognitive or nondirective therapy. All showed substantial reductions in anxiety measured by psychiatric assessor ratings, questionnaires, and daily self-monitoring. Relaxation plus cognitive therapy produced…

The Within-Job Motherhood Wage Penalty in Norway, 1979-1996

ERIC Educational Resources Information Center

Petersen, Trond; Penner, Andrew M.; Hogsnes, Geir

2010-01-01

The motherhood wage penalty is a substantial obstacle to progress in gender equality at work. Using matched employer-employee data from Norway (1979-1996, N = 236,857 individuals, N = 1,027,462 individual-years), a country with public policies that promote combining family and career, we investigate (a) whether the penalty arises from differential…

India at the crossroads of millennium development goals 4 and 5.

PubMed

Hazarika, Indrajit

2012-05-01

The current year marks the completion of two thirds of the period between the adoption of the millennium development goals (MDGs) and the target date of 2015. Although there has been some progress, it is incontestable that much more needs to be done. India contributes to 20% of births worldwide and has the highest proportion of children younger than 5 years. Global progress toward MDG 4 and 5 depends significantly on improvements in maternal and child health indicators in India. Although it has been reported that the country has made substantial progress, the pace has been slow and marred by vast regional variability. Certain states continue to have unacceptably high mortality and morbidity rates. This article provides a context to the current status of maternal and child health in India, highlights the achievements, and uses the available data effectively to emphasize the progress. The authors acknowledge the new initiatives and make recommendations for reinforcing the continuum of care.

Forward progress of scientific inquiry into the early father-child relationship: introduction to the special issue on very young children and their fathers.

PubMed

Bocknek, Erika L; Hossain, Ziarat; Roggman, Lori

2014-01-01

Research on fathering and the father-child relationship has made substantial progress in the most recent 15 years since the last special issue of the Infant Mental Health Journal on fathers and young children. This special issue on fathers and young children contains a series of papers exemplifying this progress, including advances in methodology-more direct assessment and more observational measures-in addition to the increasing dynamic complexity of the conceptual models used to study fathers, the diversity of fathers studied, and the growth of programs to support early father involvement. In assessing the current state of the field, special attention is given to contributions made by the papers contained in this special issue, and two critical areas for continued progress are addressed: (1) methodological and measurement development that specifically address fathers and fathering relationships and (2) cross-cultural and ecologically valid research examining the diversity of models of fathering. © 2014 Michigan Association for Infant Mental Health.

Maternal Setdb1 Is Required for Meiotic Progression and Preimplantation Development in Mouse.

PubMed

Kim, Jeesun; Zhao, Hongbo; Dan, Jiameng; Kim, Soojin; Hardikar, Swanand; Hollowell, Debra; Lin, Kevin; Lu, Yue; Takata, Yoko; Shen, Jianjun; Chen, Taiping

2016-04-01

Oocyte meiotic progression and maternal-to-zygote transition are accompanied by dynamic epigenetic changes. The functional significance of these changes and the key epigenetic regulators involved are largely unknown. Here we show that Setdb1, a lysine methyltransferase, controls the global level of histone H3 lysine 9 di-methyl (H3K9me2) mark in growing oocytes. Conditional deletion of Setdb1 in developing oocytes leads to meiotic arrest at the germinal vesicle and meiosis I stages, resulting in substantially fewer mature eggs. Embryos derived from these eggs exhibit severe defects in cell cycle progression, progressive delays in preimplantation development, and degeneration before reaching the blastocyst stage. Rescue experiments by expressing wild-type or inactive Setdb1 in Setdb1-deficient oocytes suggest that the catalytic activity of Setdb1 is essential for meiotic progression and early embryogenesis. Mechanistically, up-regulation of Cdc14b, a dual-specificity phosphatase that inhibits meiotic progression, greatly contributes to the meiotic arrest phenotype. Setdb1 deficiency also leads to derepression of transposons and increased DNA damage in oocytes, which likely also contribute to meiotic defects. Thus, Setdb1 is a maternal-effect gene that controls meiotic progression and is essential for early embryogenesis. Our results uncover an important link between the epigenetic machinery and the major signaling pathway governing meiotic progression.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahl, S.B.

Although significant progress toward the application of boronated LDL for site selective boron drug delivery has been made during the past year, the loss of our animal and cell culture testing site at WSU has seriously hampered progress on this project. Results are reported of one in vivo biodistribution study in B16BL6-bearing mice and a series of in vitro studies that demonstrate very substantial uptake of boronated LDL in certain cell lines. The influence of 17{alpha}-ethinyl estradiol (EE) on cellular uptake has also been probed. Most significantly LDL loaded with HC was demonstrated to be taken up with exceptional ariditymore » in several lines. Significant progress has also been made in the development of a rapid infrared analysis of boron in boronated LDL solution, which may be useful for clinical BNCT studies in Finland.« less

An evidence-based update on myopia and interventions to retard its progression

PubMed Central

Leo, Seo-Wei; Young, Terri L.

2011-01-01

Summary Myopia is the most common human eye disorder. With its increasing prevalence and earlier age-of-onset in recent birth cohorts, myopia now affects almost 33% of adult individuals in the United States, and epidemic proportions of 85% to 90% adult individuals in Asian cities. Unlike children in Western populations, where the prevalence of myopia is very low (less than 5%), Asian children have prevalences as high as 29% in 7-year-olds. In addition to the direct economic and social burdens of myopia, associated ocular complications may lead to substantial vision loss. This workshop summarizes the current literature regarding myopia epidemiology, genetics, animal model studies, risk factors, and clinical treatments. Published treatment strategies to retard the progression of myopia in children, such as pharmacologic agents, progressive addition lenses, neural adaptation programs are outlined. PMID:21596297

[Research progress and development trend of quantitative assessment techniques for urban thermal environment.

PubMed

Sun, Tie Gang; Xiao, Rong Bo; Cai, Yun Nan; Wang, Yao Wu; Wu, Chang Guang

2016-08-01

Quantitative assessment of urban thermal environment has become a focus for urban climate and environmental science since the concept of urban heat island has been proposed. With the continual development of space information and computer simulation technology, substantial progresses have been made on quantitative assessment techniques and methods of urban thermal environment. The quantitative assessment techniques have been developed to dynamics simulation and forecast of thermal environment at various scales based on statistical analysis of thermal environment on urban-scale using the historical data of weather stations. This study reviewed the development progress of ground meteorological observation, thermal infrared remote sensing and numerical simulation. Moreover, the potential advantages and disadvantages, applicability and the development trends of these techniques were also summarized, aiming to add fundamental knowledge of understanding the urban thermal environment assessment and optimization.

Flat-plate techniques for measuring reflectance of macro-algae (Ulva curvata)

USGS Publications Warehouse

Ramsey, Elijah W.; Rangoonwala, Amina; Thomsen, Mads Solgaard; Schwarzschild, Arthur

2012-01-01

We tested the consistency and accuracy of flat-plate spectral measurements (400–1000 nm) of the marine macrophyte Ulva curvata. With sequential addition of Ulva thallus layers, the reflectance progressively increased from 6% to 9% with six thalli in the visible (VIS) and from 5% to 19% with ten thalli in the near infrared (NIR). This progressive increase was simulated by a mathematical calculation based on an Ulva thallus diffuse reflectance weighted by a transmittance power series. Experimental and simulated reflectance differences that were particularly high in the NIR most likely resulted from residual water and layering structure unevenness in the experimental progression. High spectral overlap existed between fouled and non-fouled Ulva mats and the coexistent lagoon mud in the VIS, whereas in the NIR, spectral contrast was retained but substantially dampened by fouling.

The type 1 lysophosphatidic acid receptor is a target for therapy in bone metastases

PubMed Central

Boucharaba, Ahmed; Serre, Claire-Marie; Guglielmi, Julien; Bordet, Jean-Claude; Clézardin, Philippe; Peyruchaud, Olivier

2006-01-01

Platelet-derived lysophosphatidic acid (LPA) supports the progression of breast and ovarian cancer metastasis to bone. The mechanisms through which LPA promotes bone metastasis formation are, however, unknown. Here we report that silencing of the type 1 LPA receptor (LPA1) in cancer cells blocks the production of tumor-derived cytokines that are potent activators of osteoclast-mediated bone destruction and significantly reduces the progression of osteolytic bone metastases. Moreover, functional blockade of LPA action on its cognate receptor LPA1 using a pharmacological antagonist mimics the effects of silencing LPA1 in tumor cells in vitro and substantially reduces bone metastasis progression in animals. Overall, these results suggest that inhibition of platelet-derived LPA action on LPA1 expressed by tumor cells may be a promising therapeutic target for patients with bone metastases. PMID:16769891

Mechanisms underlying progressive polyuria in familial neurohypophysial diabetes insipidus.

PubMed

Arima, H; Oiso, Y

2010-07-01

Familial neurohypophysial diabetes insipidus (FNDI), an autosomal dominant disorder, is mostly caused by mutations in the gene of neurophysin II (NPII), the carrier protein of arginine vasopressin (AVP). The analyses of knock-in mice expressing a mutant NPII that causes FNDI in humans demonstrated that polyuria progressed substantially in the absence of loss of AVP neurones. Morphological analyses revealed that inclusion bodies were present in the AVP neurones in the supraoptic nucleus and that the size and numbers of inclusion bodies gradually increased in parallel with the increases in urine volume. Electron microscopic analyses showed that aggregates existed in the endoplasmic reticulum (ER) of AVP neurones. These data suggest that cell death is not the primary cause of polyuria in FNDI, and that the aggregate formation in the ER is likely to be related to the pathogenesis of the progressive polyuria.

Progress in Aluminum Electrolysis Control and Future Direction for Smart Aluminum Electrolysis Plant

NASA Astrophysics Data System (ADS)

Zhang, Hongliang; Li, Tianshuang; Li, Jie; Yang, Shuai; Zou, Zhong

2017-02-01

The industrial aluminum reduction cell is an electrochemistry reactor that operates under high temperatures and highly corrosive conditions. However, these conditions have restricted the measurement of key control parameters, making the control of aluminum reduction cells a difficult problem in the industry. Because aluminum electrolysis control systems have a significant economic influence, substantial research has been conducted on control algorithms, control systems and information systems for aluminum reduction cells. This article first summarizes the development of control systems and then focuses on the progress made since 2000, including alumina concentration control, temperature control and electrolyte molecular ratio control, fault diagnosis, cell condition prediction and control system expansion. Based on these studies, the concept of a smart aluminum electrolysis plant is proposed. The frame construction, key problems and current progress are introduced. Finally, several future directions are discussed.

[Prognosis and progression of cognitive impairment. Preventive measures].

PubMed

López Mongil, Rosa; López Trigo, José Antonio

2016-06-01

Because of the substantial increase in population ageing, age-related processes, such as dementia and Alzheimer disease (AD), are becoming highly prevalent. The course of this disease, including preprodromic phases, lasts at least 20 years. The presence of comorbidities, especially those of vascular origin, can trigger and aggravate disease progression. On the other hand, cognitive reserve, the absence or control of comorbid factors and healthy lifestyles can protect or modify -in the sense of slow down- disease progression. Knowledge of the phases of AD and their functional impact on affected individuals helps to identify the average prognosis and, in particular, to establish and predict care plans based on the individual's needs. Copyright © 2016 Sociedad Española de Geriatría y Gerontología. Publicado por Elsevier España, S.L.U. All rights reserved.

The COMET Initiative database: progress and activities update (2015).

PubMed

Gargon, E; Williamson, P R; Altman, D G; Blazeby, J M; Tunis, S; Clarke, M

2017-02-03

This letter describes the substantial activity on the Core Outcome Measure in Effectiveness Trials (COMET) website in 2015, updating our earlier progress reports for the period from the launch of the COMET website and database in August 2011 to December 2014. As in previous years, 2015 saw further increases in the annual number of visits to the website, the number of pages viewed and the number of searches undertaken. The sustained growth in use of the website and database suggests that COMET is continuing to gain interest and prominence, and that the resources are useful to people interested in the development of core outcome sets.

[Indicators of general, cerebral, and regional hemodynamics in myopic schoolchildren aged 13-15 years].

PubMed

Iastrebtseva, T A; Chuprov, A D; Plotnikova, Iu A

2002-01-01

110 schoolchildren aged 13-15 years were examined. 24 of them had pseudomyopia and 6 patients myopia of various forms. A control group consisted of 38 children. Central hemodynamics was estimated by average dynamic pressure, cerebral hemodynamics--by rheoencephalography, regional hemodynamics--by dopplerography of the internal carotid and suprapubic arteries. It was found that with myopia progression, the average dynamic pressure positively comes down with reduction of reographic waves amplitude in rheogram. The blood flow rate in internal carotid and suprapubic arteries has no substantial impact on myopia course. Predisposition to arterial hypotension is a risk factor for myopia development and progression.

OUT Success Stories: Advanced Airfoils for Wind Turbines

DOE R&D Accomplishments Database

Jones, J.; Green, B.

2000-08-01

New airfoils have substantially increased the aerodynamic efficiency of wind turbines. It is clear that these new airfoils substantially increased energy output from wind turbines. Virtually all new blades built in this country today use these advanced airfoil designs.

Hybrid Cognitive Behavioral Therapy Versus Relaxation Training for Co-Occurring Anxiety and Alcohol Disorder: A Randomized Clinical Trial

PubMed Central

Kushner, Matt G.; Maurer, Eric W.; Thuras, Paul; Donahue, Chris; Frye, Brenda; Menary, Kyle R.; Hobbs, Jennifer; Haeny, Angela M.; Demark, Joani Van

2013-01-01

Objective Treatment for alcohol use disorder (AUD) is far less effective for those with a co-occurring anxiety disorder. Surprisingly, adding an independent anxiety treatment to AUD treatment does not substantially improve the poor alcohol outcomes of these patients. This may reflect the lack of attention from independent treatments to the dynamic interaction of anxiety symptoms with alcohol use and drinking motivation. On the basis of this view, we assembled a cognitive behavioral therapy (CBT) program designed to both reduce anxiety symptoms and weaken the links between the experience of anxiety and the motivation to drink. Method 344 patients undergoing residential AUD treatment with current social phobia, generalized anxiety disorder, or panic disorder were randomly assigned to receive either the CBT or an active comparison treatment, Progressive Muscle Relaxation Training (PMRT). Assessments took place immediately following treatment and 4 months later (n = 247). Results As predicted, the CBT group demonstrated significantly better alcohol outcomes 4 months following treatment than did the PMRT group. Although both groups experienced a substantial degree of anxiety reduction following treatment, there were no significant group differences immediately after treatment and only a slight advantage for the CBT group 4 months after treatment. Conclusions These findings suggest that specific interventions aimed at weakening the association between the experience of anxiety and drinking motivation play an important role in improving the alcohol outcomes of these difficult-to-treat patients beyond that of anxiety reduction alone. PMID:23276124

A learning progression based teaching module on the causes of seasons

NASA Astrophysics Data System (ADS)

Galano, S.

2016-03-01

In this paper, we report about designing and validating a teaching learning module based on a learning progression and focused on the causes of seasons. An initial learning progression about the Celestial Motion big idea -causes of seasons, lunar and solar eclipse and Moon phases- was developed and validated. Existing curricula, research studies on alternative conceptions about these phenomena, and students' answers to an open questionnaire were the starting point to develop initial learning progressions; then, a two-tier multiple-choice questionnaire was designed to validate and improve it. The questionnaire was submitted to about 300 secondary-school students whose answers were used to revise the hypothesized learning progressions. This improved version of the learning progression was used to design a module focused on the causes of seasons in which students were engaged in quantitative measurements with a photovoltaic panel to explain changes of the Sun rays' flow on the Earth's surface over the year. The efficacy of our module in improving students' understanding of the phenomenon of the seasons was tested using our questionnaire as pre- and post-test.

Design or "Design"--Envisioning a Future Design Education

ERIC Educational Resources Information Center

Sless, David

2012-01-01

Challenging the common grand vision of Design, this article considers "design" as a humble re-forming process based on evidence to substantiate its results. The designer is likened to a tinker who respects previous iterations of a design and seeks to retain what is useful while improving its performance. A design process is offered,…

Review of the magnetic fusion program by the 1986 ERAB Fusion Panel

NASA Astrophysics Data System (ADS)

Davidson, Ronald C.

1987-09-01

The 1986 ERAB Fusion Panel finds that fusion energy continues to be an attractive energy source with great potential for the future, and that the magnetic fusion program continues to make substantial technical progress. In addition, fusion research advances plasma physics, a sophisticated and useful branch of applied science, as well as technologies important to industry and defense. These factors fully justify the substantial expenditures by the Department of Energy in fusion research and development (R&D). The Panel endorses the overall program direction, strategy, and plans, and recognizes the importance and timeliness of proceeding with a burning plasma experiment, such as the proposed Compact Ignition Tokamak (CIT) experiment.

A plot twist: the continuing story of VCSELs at AOC

NASA Astrophysics Data System (ADS)

Guenter, James K.; Tatum, Jim A.; Hawthorne, Robert A., III; Johnson, Ralph H.; Mathes, David T.; Hawkins, Bobby M.

2005-03-01

During a year of substantial consolidation in the VCSEL industry, Honeywell sold their VCSEL Optical Products Division, which has now officially changed its name to Advanced Optical Components (AOC). Both manufacture and applied research continue, however. Some of the developments of the past year are discussed in this paper. They include advances in the understanding of VCSEL degradation physics, substantial improvements in long-wavelength VCSEL performance, and continuing progress in manufacturing technology. In addition, higher speed serial communications products, at 10 gigabits and particularly at 4 gigabits per second, have shown faster than predicted growth. We place these technologies and AOC's approach to them in a market perspective, along with other emerging applications.

Design Research on Mathematics Education: Investigating the Progress of Indonesian Fifth Grade Students' Learning on Multiplication of Fractions with Natural Numbers

ERIC Educational Resources Information Center

Shanty, Nenden Octavarulia; Hartono, Yusuf; Putri, Ratu Ilma Indra; de Haan, Dede

2011-01-01

This study aimed at investigating the progress of students' learning on multiplication fractions with natural numbers through the five activity levels based on Realistic Mathematics Education (RME) approach proposed by Streefland. Design research was chosen to achieve this research goal. In design research, the Hypothetical Learning Trajectory…

Antimicrobial Peptides: Insights into Membrane Permeabilization, Lipopolysaccharide Fragmentation and Application in Plant Disease Control.

PubMed

Datta, Aritreyee; Ghosh, Anirban; Airoldi, Cristina; Sperandeo, Paola; Mroue, Kamal H; Jiménez-Barbero, Jesús; Kundu, Pallob; Ramamoorthy, Ayyalusamy; Bhunia, Anirban

2015-07-06

The recent increase in multidrug resistance against bacterial infections has become a major concern to human health and global food security. Synthetic antimicrobial peptides (AMPs) have recently received substantial attention as potential alternatives to conventional antibiotics because of their potent broad-spectrum antimicrobial activity. These peptides have also been implicated in plant disease control for replacing conventional treatment methods that are polluting and hazardous to the environment and to human health. Here, we report de novo design and antimicrobial studies of VG16, a 16-residue active fragment of Dengue virus fusion peptide. Our results reveal that VG16KRKP, a non-toxic and non-hemolytic analogue of VG16, shows significant antimicrobial activity against Gram-negative E. coli and plant pathogens X. oryzae and X. campestris, as well as against human fungal pathogens C. albicans and C. grubii. VG16KRKP is also capable of inhibiting bacterial disease progression in plants. The solution-NMR structure of VG16KRKP in lipopolysaccharide features a folded conformation with a centrally located turn-type structure stabilized by aromatic-aromatic packing interactions with extended N- and C-termini. The de novo design of VG16KRKP provides valuable insights into the development of more potent antibacterial and antiendotoxic peptides for the treatment of human and plant infections.

Progress Toward an Efficient and General CFD Tool for Propulsion Design/Analysis

NASA Technical Reports Server (NTRS)

Cox, C. F.; Cinnella, P.; Westmoreland, S.

1996-01-01

The simulation of propulsive flows inherently involves chemical activity. Recent years have seen substantial strides made in the development of numerical schemes for reacting flowfields, in particular those involving finite-rate chemistry. However, finite-rate calculations are computationally intensive and require knowledge of the actual kinetics, which are not always known with sufficient accuracy. Alternatively, flow simulations based on the assumption of local chemical equilibrium are capable of obtaining physically reasonable results at far less computational cost. The present study summarizes the development of efficient numerical techniques for the simulation of flows in local chemical equilibrium, whereby a 'Black Box' chemical equilibrium solver is coupled to the usual gasdynamic equations. The generalization of the methods enables the modelling of any arbitrary mixture of thermally perfect gases, including air, combustion mixtures and plasmas. As demonstration of the potential of the methodologies, several solutions, involving reacting and perfect gas flows, will be presented. Included is a preliminary simulation of the SSME startup transient. Future enhancements to the proposed techniques will be discussed, including more efficient finite-rate and hybrid (partial equilibrium) schemes. The algorithms that have been developed and are being optimized provide for an efficient and general tool for the design and analysis of propulsion systems.

Structure of a protective epitope of group B Streptococcus type III capsular polysaccharide.

PubMed

Carboni, Filippo; Adamo, Roberto; Fabbrini, Monica; De Ricco, Riccardo; Cattaneo, Vittorio; Brogioni, Barbara; Veggi, Daniele; Pinto, Vittoria; Passalacqua, Irene; Oldrini, Davide; Rappuoli, Rino; Malito, Enrico; Margarit, Immaculada Y Ros; Berti, Francesco

2017-05-09

Despite substantial progress in the prevention of group B Streptococcus (GBS) disease with the introduction of intrapartum antibiotic prophylaxis, this pathogen remains a leading cause of neonatal infection. Capsular polysaccharide conjugate vaccines have been tested in phase I/II clinical studies, showing promise for further development. Mapping of epitopes recognized by protective antibodies is crucial for understanding the mechanism of action of vaccines and for enabling antigen design. In this study, we report the structure of the epitope recognized by a monoclonal antibody with opsonophagocytic activity and representative of the protective response against type III GBS polysaccharide. The structure and the atomic-level interactions were determined by saturation transfer difference (STD)-NMR and X-ray crystallography using oligosaccharides obtained by synthetic and depolymerization procedures. The GBS PSIII epitope is made by six sugars. Four of them derive from two adjacent repeating units of the PSIII backbone and two of them from the branched galactose-sialic acid disaccharide contained in this sequence. The sialic acid residue establishes direct binding interactions with the functional antibody. The crystal structure provides insight into the molecular basis of antibody-carbohydrate interactions and confirms that the conformational epitope is not required for antigen recognition. Understanding the structural basis of immune recognition of capsular polysaccharide epitopes can aid in the design of novel glycoconjugate vaccines.

Advancing coastal ocean modelling, analysis, and prediction for the US Integrated Ocean Observing System

USGS Publications Warehouse

Wilkin, John L.; Rosenfeld, Leslie; Allen, Arthur; Baltes, Rebecca; Baptista, Antonio; He, Ruoying; Hogan, Patrick; Kurapov, Alexander; Mehra, Avichal; Quintrell, Josie; Schwab, David; Signell, Richard; Smith, Jane

2017-01-01

This paper outlines strategies that would advance coastal ocean modelling, analysis and prediction as a complement to the observing and data management activities of the coastal components of the US Integrated Ocean Observing System (IOOS®) and the Global Ocean Observing System (GOOS). The views presented are the consensus of a group of US-based researchers with a cross-section of coastal oceanography and ocean modelling expertise and community representation drawn from Regional and US Federal partners in IOOS. Priorities for research and development are suggested that would enhance the value of IOOS observations through model-based synthesis, deliver better model-based information products, and assist the design, evaluation, and operation of the observing system itself. The proposed priorities are: model coupling, data assimilation, nearshore processes, cyberinfrastructure and model skill assessment, modelling for observing system design, evaluation and operation, ensemble prediction, and fast predictors. Approaches are suggested to accomplish substantial progress in a 3–8-year timeframe. In addition, the group proposes steps to promote collaboration between research and operations groups in Regional Associations, US Federal Agencies, and the international ocean research community in general that would foster coordination on scientific and technical issues, and strengthen federal–academic partnerships benefiting IOOS stakeholders and end users.

Breast cancer: updates and advances in 2016.

PubMed

Giordano, Sara B; Gradishar, William

2017-02-01

Approximately 1 in 8 US women (12%) will develop invasive breast cancer over the course of her lifetime. In 2016, an estimated 246,660 new cases of invasive breast cancer are expected to be diagnosed and approximately 40,450 would die as a result of it. The global burden of breast cancer exceeds all other cancers and the incidence is increasing. The heterogeneity of breast cancer makes it a challenging solid tumor to diagnose and treat. This review focuses on the recent advances in breast cancer therapy including hormonal treatment of metastatic breast cancer, targeting cyclin-dependent kinases (CDK) 4/6 in breast cancer, updates in targeting human epidermal growth factor receptor 2 (HER2) positive breast cancer, adaptive randomization trial design and cancer genetic risk assessment. Breast cancer is a heterogeneous disease and targeted therapy is improving the outcomes of women. The use of cyclin-dependent kinase inhibitors (CDK) 4/6 have demonstrated a substantial improvement in progression-free survival in the first line setting of metastatic hormone receptor positive breast cancer. And newer agents directed at HER2 continue to revolutionize HER2-positive breast cancer treatment. This review highlights the recent updates in breast cancer treatment, new concepts in clinical trial design and provides a current overview of cancer genetic risk assessment.

Investigation of progressive failure robustness and alternate load paths for damage tolerant structures

NASA Astrophysics Data System (ADS)

Marhadi, Kun Saptohartyadi

Structural optimization for damage tolerance under various unforeseen damage scenarios is computationally challenging. It couples non-linear progressive failure analysis with sampling-based stochastic analysis of random damage. The goal of this research was to understand the relationship between alternate load paths available in a structure and its damage tolerance, and to use this information to develop computationally efficient methods for designing damage tolerant structures. Progressive failure of a redundant truss structure subjected to small random variability was investigated to identify features that correlate with robustness and predictability of the structure's progressive failure. The identified features were used to develop numerical surrogate measures that permit computationally efficient deterministic optimization to achieve robustness and predictability of progressive failure. Analysis of damage tolerance on designs with robust progressive failure indicated that robustness and predictability of progressive failure do not guarantee damage tolerance. Damage tolerance requires a structure to redistribute its load to alternate load paths. In order to investigate the load distribution characteristics that lead to damage tolerance in structures, designs with varying degrees of damage tolerance were generated using brute force stochastic optimization. A method based on principal component analysis was used to describe load distributions (alternate load paths) in the structures. Results indicate that a structure that can develop alternate paths is not necessarily damage tolerant. The alternate load paths must have a required minimum load capability. Robustness analysis of damage tolerant optimum designs indicates that designs are tailored to specified damage. A design Optimized under one damage specification can be sensitive to other damages not considered. Effectiveness of existing load path definitions and characterizations were investigated for continuum structures. A load path definition using a relative compliance change measure (U* field) was demonstrated to be the most useful measure of load path. This measure provides quantitative information on load path trajectories and qualitative information on the effectiveness of the load path. The use of the U* description of load paths in optimizing structures for effective load paths was investigated.

Collaborative real-time motion video analysis by human observer and image exploitation algorithms

NASA Astrophysics Data System (ADS)

Hild, Jutta; Krüger, Wolfgang; Brüstle, Stefan; Trantelle, Patrick; Unmüßig, Gabriel; Heinze, Norbert; Peinsipp-Byma, Elisabeth; Beyerer, Jürgen

2015-05-01

Motion video analysis is a challenging task, especially in real-time applications. In most safety and security critical applications, a human observer is an obligatory part of the overall analysis system. Over the last years, substantial progress has been made in the development of automated image exploitation algorithms. Hence, we investigate how the benefits of automated video analysis can be integrated suitably into the current video exploitation systems. In this paper, a system design is introduced which strives to combine both the qualities of the human observer's perception and the automated algorithms, thus aiming to improve the overall performance of a real-time video analysis system. The system design builds on prior work where we showed the benefits for the human observer by means of a user interface which utilizes the human visual focus of attention revealed by the eye gaze direction for interaction with the image exploitation system; eye tracker-based interaction allows much faster, more convenient, and equally precise moving target acquisition in video images than traditional computer mouse selection. The system design also builds on prior work we did on automated target detection, segmentation, and tracking algorithms. Beside the system design, a first pilot study is presented, where we investigated how the participants (all non-experts in video analysis) performed in initializing an object tracking subsystem by selecting a target for tracking. Preliminary results show that the gaze + key press technique is an effective, efficient, and easy to use interaction technique when performing selection operations on moving targets in videos in order to initialize an object tracking function.

How We Make DNA Origami.

PubMed

Wagenbauer, Klaus F; Engelhardt, Floris A S; Stahl, Evi; Hechtl, Vera K; Stömmer, Pierre; Seebacher, Fabian; Meregalli, Letizia; Ketterer, Philip; Gerling, Thomas; Dietz, Hendrik

2017-10-05

DNA origami has attracted substantial attention since its invention ten years ago, due to the seemingly infinite possibilities that it affords for creating customized nanoscale objects. Although the basic concept of DNA origami is easy to understand, using custom DNA origami in practical applications requires detailed know-how for designing and producing the particles with sufficient quality and for preparing them at appropriate concentrations with the necessary degree of purity in custom environments. Such know-how is not readily available for newcomers to the field, thus slowing down the rate at which new applications outside the field of DNA nanotechnology may emerge. To foster faster progress, we share in this article the experience in making and preparing DNA origami that we have accumulated over recent years. We discuss design solutions for creating advanced structural motifs including corners and various types of hinges that expand the design space for the more rigid multilayer DNA origami and provide guidelines for preventing undesired aggregation and on how to induce specific oligomerization of multiple DNA origami building blocks. In addition, we provide detailed protocols and discuss the expected results for five key methods that allow efficient and damage-free preparation of DNA origami. These methods are agarose-gel purification, filtration through molecular cut-off membranes, PEG precipitation, size-exclusion chromatography, and ultracentrifugation-based sedimentation. The guide for creating advanced design motifs and the detailed protocols with their experimental characterization that we describe here should lower the barrier for researchers to accomplish the full DNA origami production workflow. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

X-33/RLV Program Aerospike Engines

NASA Technical Reports Server (NTRS)

1999-01-01

Substantial progress was made during the past year in support of the X-33/RLV program. X-33 activity was directed towards completing the remaining design work and building hardware to support test activities. RLV work focused on the nozzle ramp and powerpack technology tasks and on supporting vehicle configuration studies. On X-33, the design activity was completed to the detail level and the remainder of the drawings were released. Component fabrication and engine assembly activity was initiated, and the first two powerpacks and the GSE and STE needed to support powerpack testing were completed. Components fabrication is on track to support the first engine assembly schedule. Testing activity included powerpack testing and component development tests consisting of thrust cell single cell testing, CWI system spider testing, and EMA valve flow and vibration testing. Work performed for RLV was divided between engine system and technology development tasks. Engine system activity focused on developing the engine system configuration and supporting vehicle configuration studies. Also, engine requirements were developed, and engine performance analyses were conducted. In addition, processes were developed for implementing reliability, mass properties, and cost controls during design. Technology development efforts were divided between powerpack and nozzle ramp technology tasks. Powerpack technology activities were directed towards the development of a prototype powerpack and a ceramic turbine technology demonstrator (CTTD) test article which will allow testing of ceramic turbines and a close-coupled gas generator design. Nozzle technology efforts were focused on the selection of a composite nozzle supplier and on the fabrication and test of composite nozzle coupons.

Intraindividual differences in executive functions during childhood: the role of emotions.

PubMed

Pnevmatikos, Dimitris; Trikkaliotis, Ioannis

2013-06-01

Intraindividual differences in executive functions (EFs) have been rarely investigated. In this study, we addressed the question of whether the emotional fluctuations that schoolchildren experience in their classroom settings could generate substantial intraindividual differences in their EFs and, more specifically, in the fundamental unifying component of EFs, their inhibition function. We designed an experimental research with ecological validity within the school setting where schoolchildren of three age groups (8-, 10-, and 12-year-olds) were involved. We executed three experiments. In Experiment 1, using a between-participants design, we isolated a classroom episode that, compared with the other episodes, generated significant differences in inhibitory function in a consequent Go/NoGo task. This was an episode that induced frustration after the experience of anxiety due to the uncertainty. Experiment 2, using a within-participants design, confirmed both the induced emotions from the episode and the intraindividual variability in schoolchildren's inhibition accuracy in the consequent Go/NoGo task. Experiment 3, again using a within-participants design, examined whether the same episode could generate intraindividual differences in a more demanding inhibition task, namely the anti-saccade task. The experiment confirmed the previous evidence; the episode generated high variability that in some age groups accounted for more than 1.5 standard deviations from the interindividual variability between the schoolchildren of the same age. Results showed that, regardless of their sex and the developmental progression in their inhibition with age, the variability induced within participants from the experienced frustration was very high compared with the interindividual variability of the same age group. Copyright © 2013 Elsevier Inc. All rights reserved.

Probabilistic Assessment of Fracture Progression in Composite Structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Minnetyan, Levon; Mauget, Bertrand; Huang, Dade; Addi, Frank

1999-01-01

This report describes methods and corresponding computer codes that are used to evaluate progressive damage and fracture and to perform probabilistic assessment in built-up composite structures. Structural response is assessed probabilistically, during progressive fracture. The effects of design variable uncertainties on structural fracture progression are quantified. The fast probability integrator (FPI) is used to assess the response scatter in the composite structure at damage initiation. The sensitivity of the damage response to design variables is computed. The methods are general purpose and are applicable to stitched and unstitched composites in all types of structures and fracture processes starting from damage initiation to unstable propagation and to global structure collapse. The methods are demonstrated for a polymer matrix composite stiffened panel subjected to pressure. The results indicated that composite constituent properties, fabrication parameters, and respective uncertainties have a significant effect on structural durability and reliability. Design implications with regard to damage progression, damage tolerance, and reliability of composite structures are examined.

Toward high-resolution computational design of helical membrane protein structure and function

PubMed Central

Barth, Patrick; Senes, Alessandro

2016-01-01

The computational design of α-helical membrane proteins is still in its infancy but has made important progress. De novo design has produced stable, specific and active minimalistic oligomeric systems. Computational re-engineering can improve stability and modulate the function of natural membrane proteins. Currently, the major hurdle for the field is not computational, but the experimental characterization of the designs. The emergence of new structural methods for membrane proteins will accelerate progress PMID:27273630

Toward high-resolution computational design of the structure and function of helical membrane proteins.

PubMed

Barth, Patrick; Senes, Alessandro

2016-06-07

The computational design of α-helical membrane proteins is still in its infancy but has already made great progress. De novo design allows stable, specific and active minimal oligomeric systems to be obtained. Computational reengineering can improve the stability and function of naturally occurring membrane proteins. Currently, the major hurdle for the field is the experimental characterization of the designs. The emergence of new structural methods for membrane proteins will accelerate progress.

Neurofibrillary Tangle Stage and the Rate of Progression of Alzheimer Symptoms: Modeling Using an Autopsy Cohort and Application to Clinical Trial Design

PubMed Central

Qian, Jing; T.Hyman, Bradley; Betensky, Rebecca A.

2017-01-01

Importance The heterogeneity of rate of clinical progression among patients with Alzheimer disease leads to difficulty in providing clinical counseling and diminishes the power of clinical trials using disease-modifying agents. Objective To gain a better understanding of the factors that affect the natural history of progression in Alzheimer disease for the purpose of improving both clinical care and clinical trial design. Design, Setting, and Participants A longitudinal cohort study of aging from 2005 to 2014 in the National Alzheimer Coordinating Center. Clinical evaluation of the participants was conducted in 31 National Institute on Aging’s Alzheimer Disease Centers. Nine hundred eighty-four participants in the National Alzheimer Coordinating Center cohort study who died and underwent autopsy and met inclusion and exclusion criteria. Main Outcomes and Measures We sought to model the possibility that knowledge of neurofibrillary tangle burden in the presence of moderate or frequent plaques would add to the ability to predict clinical rate of progression during the ensuing 2 to 3 years. We examined the National Alzheimer Coordinating Center autopsy data to evaluate the effect of different neurofibrillary tangle stages on the rates of progression on several standard clinical instruments: the Clinical Dementia Rating Scale sum of boxes, a verbal memory test (logical memory), and a controlled oral word association task (vegetable naming), implementing a reverse-time longitudinal modeling approach in conjunction with latent class estimation to adjust for unmeasured sources of heterogeneity. Results Several correlations between clinical variables and neurocognitive performance suggest a basis for heterogeneity: Higher education level was associated with lower Clinical Dementia Rating Scale sum of boxes (β = −0.19; P < .001), and frequent vs moderate neuritic plaques were associated with higher Clinical Dementia Rating Scale sum of boxes (β = 1.64; P < .001) and lower logical memory score (β = −1.07; P = .005). The rate of change of the clinical and cognitive scores varied depending on Braak stage, when adjusting for plaques, age of death, sex, education, and APOE genotype. For example, comparing high vs low Braak stage with other variables fixed, the logical memory score decreased a substantial 0.38 additional units per year (95% CI, −0.70 to −0.06; P = .02). Using these data, we estimate that a 300-participant clinical trial with end point of a 20% improvement in slope in rate of change of Clinical Dementia Rating Scale sum of boxes has 89% power when all participants in the trial are from the high Braak stage, compared with 29% power if Braak stage had not used for eligibility. Conclusions and Relevance We found that knowledge of neurofibrillary tangle stage, modeled as the sort of information that could be available from tau positron-emission tomography scans and its use to determine eligibility to a trial, could dramatically improve the power of clinical trials and equivalently reduce the required sample sizes of clinical trials. PMID:28288263

Educator Outcomes Associated with Implementation of Mississippi's K-3 Early Literacy Professional Development Initiative. REL 2017-270

ERIC Educational Resources Information Center

Folsom, Jessica Sidler; Smith, Kevin G.; Burk, Kymyona; Oakley, Nathan

2017-01-01

Substantial research points to the importance of developing strong early literacy skills. However, according to the National Assessment of Educational Progress, between 2007 and 2013, no more than 55 percent of Mississippi grade 4 students were reading at or above the proficiency level that demonstrates solid academic performance for the grade…

PROGRESS REPORT OF VOCATIONAL-TECHNICAL EDUCATION PROGRAM DEVELOPMENT FOR PERSONS WITH SPECIAL NEEDS BY STATES. DISCUSSION COPY.

ERIC Educational Resources Information Center

DEMOND, ALBERT L.; AND OTHERS

PROGRAMS DEVELOPED SINCE THE PASSAGE OF THE VOCATIONAL EDUCATION ACT OF 1963 ARE REPORTED FOR EACH STATE, GUAM, PUERTO RICO AND THE VIRGIN ISLANDS. EACH REPORT INCLUDES INTRODUCTORY INFORMATION AND THE OCCUPATIONAL AREAS IN WHICH TRAINING IS BEING OFFERED. A LARGE NUMBER OF SUCCESSFUL PROGRAMS ARE GETTING SUBSTANTIAL RESULTS IN REDUCING SCHOOL…

Progress in analysis of computed tomography (CT) images of hardwood logs for defect detection

Treesearch

Erol Sarigul; A. Lynn Abbott; Daniel L. Schmoldt

2003-01-01

This paper addresses the problem of automatically detecting internal defects in logs using computed tomography (CT) images. The overall purpose is to assist in breakdown optimization. Several studies have shown that the commercial value of resulting boards can be increased substantially if defect locations are known in advance, and if this information is used to make...

Learning to See by Learning to Draw: Probing the Perceptual Bases and Consequences of Highly Skilled Artistic Drawing

ERIC Educational Resources Information Center

Kozbelt, Aaron

2017-01-01

In this paper, I review the empirical evidence for advantages in visual perception and attention that may be associated with high levels of drawing skill. Particularly in the last few decades, some substantial progress on these issues has been made, although frequently with inconsistent or even contradictory results across studies, some…

Trends in Gender Differences in Academic Achievement from 1960 to 1994: An Analysis of Differences in Mean, Variance, and Extreme Scores.

ERIC Educational Resources Information Center

Nowell, Amy; Hedges, Larry V.

1998-01-01

Uses evidence from seven surveys of the U.S. 12th-grade population and the National Assessment of Educational Progress to show that gender differences in mean and variance in academic achievement are small from 1960 to 1994 but that differences in extreme scores are often substantial. (SLD)

25 CFR 1000.244 - May the Secretary suspend construction activities under an AFA?

Code of Federal Regulations, 2010 CFR

2010-04-01

... construction activities under an AFA? (a) The Secretary may require a Tribe/Consortium to suspend certain work under a construction portion of an AFA for up to 30 days only if: (1) Site conditions adversely affect health and safety; or (2) Work in progress or completed fails to substantially carry out the terms of the...

Kindergarten Black-White Test Score Gaps: Replicating and Updating Previous Findings with New National Data

ERIC Educational Resources Information Center

Quinn, David

2014-01-01

A substantial body of evidence has shown large academic test score gaps between black and white students in early childhood. These gaps remain, and probably grow, as students progress through school. Many researchers have sought to explain these persistent test score gaps, and particularly, to understand the role of students' socio-economic status…

Predicting armed conflict: Time to adjust our expectations?

PubMed

Cederman, Lars-Erik; Weidmann, Nils B

2017-02-03

This Essay provides an introduction to the general challenges of predicting political violence, particularly compared with predicting other types of events (such as earthquakes). What is possible? What is less realistic? We aim to debunk myths about predicting violence, as well as to illustrate the substantial progress in this field. Copyright © 2017, American Association for the Advancement of Science.

A 3-arm randomized controlled trial on the effects of dance movement intervention and exercises on elderly with early dementia.

PubMed

Ho, Rainbow Tin Hung; Cheung, Jacob Kai Ki; Chan, Wai Chi; Cheung, Irene Kit Man; Lam, Linda Chiu Wah

2015-10-19

Dementia is characterized by a progressive decline and deterioration of brain regions such as memory, spatial navigation and language, along with disturbances in daily functioning. Non-pharmacological interventions that offer a holistic approach by targeting cognitive functioning, prognosis and the psychological and social effects of dementia require rigorous investigation. The well-established benefits of physical activity for cognitive functioning and psychological support in dementia have been observed with dance-movement intervention. There is substantial evidence that dance-movement interventions provide emotional and social advantages. Thus, a randomized controlled trial (RCT) is planned to investigate the positive effects of a dance movement intervention, compared with mild physical exercise, on the physical and psychological well-being of elderly Chinese individuals with early dementia. A 3-arm RCT with waitlist control design will be used in this study. Two hundred and one elderly participants with very mild to mild dementia will be screened and randomized into the following groups: (i) dance movement based intervention, (ii) stretching and exercise intervention and (iii) no intervention waitlist-control group. The two intervention groups will receive a 1-h intervention, twice a week, for 12 weeks. The participants will be assessed four times over the course of 12 months: baseline before randomization, post-intervention (3 months), 6 months from baseline and 12 months from baseline. The primary outcomes will be compared between assessment points and between groups on neuropsychiatric symptoms, psychosocial well-being and cognitive and daily functioning. Secondary outcomes will assess the changes in salivary cortisol levels and their relationships with the primary outcome measures. This study will provide substantial evidence of the efficacy of a dance-movement-based intervention in slowing down dementia progression, due to its ability to act as a buffer against decline and improve areas affected by dementia. We also anticipate an association between cortisol levels and the outcome measures. The further development of this intervention into a structural program may be warranted for early psychosocial support among elderly populations. The trial has been registered in the Chinese Clinical Trial Registry ( ChiCTR-IOR-15006541 ).

Fetal transesophageal echocardiography: clinical introduction as a monitoring tool during cardiac intervention in a human fetus.

PubMed

Kohl, T; Müller, A; Tchatcheva, K; Achenbach, S; Gembruch, U

2005-12-01

Because of insufficient imaging by maternal transabdominal fetal echocardiography (TAE) in a human fetus with aortic atresia, imperforate atrial septum and progressive cardiac failure, we assessed the feasibility of fetal transesophageal echocardiography (TEE) as a monitoring tool during fetal cardiac intervention at 24 + 6 weeks of gestation. Percutaneous fetoscopic intraesophageal deployment of the ultrasound catheter was achieved and did not result in any maternal or fetal complications. Fetal TEE permitted substantially clearer definition of fetal cardiac anatomy and intracardiac device manipulations than conventional maternal TAE. Despite the employment of various devices, no sufficiently large opening could be achieved within the atrial septum. Although the fetus tolerated the procedure remarkably well and satisfactory fetoplacental flow could be documented at the end of the procedure, the fetus died from progressive cardiac failure 3 days after the intervention. Fetoscopic TEE is feasible in the human fetus and permits substantially clearer definition of fetal cardiac anatomy and intracardiac manipulations than conventional maternal TAE. Based on the observation of spontaneous closure of multiple iatrogenic perforations of the atrial septum, specialized devices are required in order to improve the technical success rate of septoplasty methods and hence the survival odds of these high-risk patients.

Natural orifice translumenal endoscopic surgery: Progress in humans since white paper

PubMed Central

Santos, Byron F; Hungness, Eric S

2011-01-01

Since the first description of the concept of natural orifice translumenal endoscopic surgery (NOTES), a substantial number of clinical NOTES reports have appeared in the literature. This editorial reviews the available human data addressing research questions originally proposed by the white paper, including determining the optimal method of access for NOTES, developing safe methods of lumenal closure, suturing and anastomotic devices, advanced multitasking platforms, addressing the risk of infection, managing complications, addressing challenges with visualization, and training for NOTES procedures. An analysis of the literature reveals that so far transvaginal access and closure appear to be the most feasible techniques for NOTES, with a limited, but growing transgastric, transrectal, and transesophageal NOTES experience in humans. The theoretically increased risk of infection as a result of NOTES procedures has not been substantiated in transvaginal and transgastric procedures so far. Development of suturing and anastomotic devices and advanced platforms for NOTES has progressed slowly, with limited clinical data on their use so far. Data on the optimal management and incidence of intraoperative complications remain sparse, although possible factors contributing to complications are discussed. Finally, this editorial discusses the likely direction of future NOTES development and its possible role in clinical practice. PMID:21483624

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Piland, William M.

1999-01-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across the Agency.

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Piland, William M.

2000-01-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operation). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographical distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across Agency.

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Astrophysics Data System (ADS)

Monell, Donald W.; Piland, William M.

2000-07-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often led to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across the Agency.

Current approaches to myopia control.

PubMed

Leo, Seo Wei

2017-05-01

Myopia is a global problem, being particularly prevalent in the urban areas of east and southeast Asia. In addition to the direct economic and social burdens, associated ocular complications may lead to substantial vision loss. With prevalence of myopia above 80% and high myopia over 20%, it is crucial to control myopia. The aim of this review to is provide an update on the interventions to slow the onset of myopia and retard its progression. The epidemic of myopia is characterized by increasingly early onset, combined with high myopia progression rates. There are two pathways for myopia control: firstly to slow the onset of myopia and secondly to reduce or prevent progression. Increased time outdoors can reduce the onset of myopia. Atropine 0.01% dose offers an appropriate risk-benefit ratio, with no clinically significant visual side effects balanced against a significant 50% reduction in myopia progression. Orthokeratology contact lenses can slow axial length elongation, but infective keratitis is a risk. Peripheral defocussing lenses may both have a role in slowing myopic progression in a subset of children and further help our understanding of the physiologic control of ocular growth. Myopia control can be achieved by slowing the onset of myopia, which now appears to be possible through increasing time outdoors and slowing the progression of myopia with interventions like atropine and orthokeratology.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1990-01-01

Advanced Turbine Technology Application Project (ATTAP) activities during the past year were highlighted by test-bed engine design and development activities; ceramic component design; materials and component characterization; ceramic component process development and fabrication; component rig testing; and test-bed engine fabrication and testing. Although substantial technical challenges remain, all areas exhibited progress. Test-bed engine design and development activity included engine mechanical design, power turbine flow-path design and mechanical layout, and engine system integration aimed at upgrading the AGT-5 from a 1038 C metal engine to a durable 1371 C structural ceramic component test-bed engine. ATTAP-defined ceramic and associated ceramic/metal component design activities include: the ceramic combustor body, the ceramic gasifier turbine static structure, the ceramic gasifier turbine rotor, the ceramic/metal power turbine static structure, and the ceramic power turbine rotors. The materials and component characterization efforts included the testing and evaluation of several candidate ceramic materials and components being developed for use in the ATTAP. Ceramic component process development and fabrication activities are being conducted for the gasifier turbine rotor, gasifier turbine vanes, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Component rig testing activities include the development of the necessary test procedures and conduction of rig testing of the ceramic components and assemblies. Four-hundred hours of hot gasifier rig test time were accumulated with turbine inlet temperatures exceeding 1204 C at 100 percent design gasifier speed. A total of 348.6 test hours were achieved on a single ceramic rotor without failure and a second ceramic rotor was retired in engine-ready condition at 364.9 test hours. Test-bed engine fabrication, testing, and development supported improvements in ceramic component technology that will permit the achievement of program performance and durability goals. The designated durability engine accumulated 359.3 hour of test time, 226.9 of which were on the General Motors gas turbine durability schedule.

31 CFR 536.408 - Alleged change in ownership or control of an entity designated as a specially designated...

Code of Federal Regulations, 2010 CFR

2010-07-01

... sale of the entity to its new owners. (b) Any continuing substantial financial obligations on the part... to or other enrichment of a specially designated narcotics trafficker could lead to designation of...

Feeling bad about progress does not lead people want to change their health behaviour.

PubMed

Reynolds, James P; Webb, Thomas L; Benn, Yael; Chang, Betty P I; Sheeran, Paschal

2018-02-01

When do people decide to do something about problematic health behaviours? Theoretical models and pragmatic considerations suggest that people should take action when they feel bad about their progress - in other words, when they experience negative progress-related affect. However, the impact of progress-related affect on goal striving has rarely been investigated. Study 1 (N = 744) adopted a cross-sectional design and examined the extent to which measures of progress-related affect were correlated with intentions to take action. Study 2 (N = 409) investigated the impact of manipulating progress-related affect on intentions and behaviour in an experimental design. Study 1 found that, while engaging in health behaviours had the expected affective consequences (e.g. people felt bad when they were not eating healthily, exercising regularly or limiting their alcohol consumption), it was feeling good rather than bad about progress that was associated with stronger intentions. Study 2 replicated these findings. Participants induced to feel good about their eating behaviour had marginally stronger intentions to eat healthily than participants led to feel bad about their eating behaviour. The findings have implications for interventions designed to promote changes in health behaviour, as well as theoretical frameworks for understanding self-regulation.

From "E-flows" to "Sed-flows": Managing the Problem of Sediment in High Altitude Hydropower Systems

NASA Astrophysics Data System (ADS)

Gabbud, C.; Lane, S. N.

2017-12-01

The connections between stream hydraulics, geomorphology and ecosystems in mountain rivers have been substantially perturbed by humans, for example through flow regulation related to hydropower activities. It is well known that the ecosystem impacts downstream of hydropower dams may be managed by a properly designed compensation release or environmental flows ("e-flows"), and such flows may also include sediment considerations (e.g. to break up bed armor). However, there has been much less attention given to the ecosystem impacts of water intakes (where water is extracted and transferred for storage and/or power production), even though in many mountain systems such intakes may be prevalent. Flow intakes tend to be smaller than dams and because they fill quickly in the presence of sediment delivery, they often need to be flushed, many times within a day in Alpine glaciated catchments with high sediment yields. The associated short duration "flood" flow is characterised by very high sediment concentrations, which may drastically modify downstream habitat, both during the floods but also due to subsequent accumulation of "legacy" sediment. The impacts on flora and fauna of these systems have not been well studied. In addition, there are no guidelines established that might allow the design of "e-flows" that also treat this sediment problem, something we call "sed-flows". Through an Alpine field example, we quantify the hydrological, geomorphological, and ecosystem impacts of Alpine water transfer systems. The high sediment concentrations of these flushing flows lead to very high rates of channel disturbance downstream, superimposed upon long-term and progressive bed sediment accumulation. Monthly macroinvertebrate surveys over almost a two-year period showed that reductions in the flushing rate reduced rates of disturbance substantially, and led to rapid macroinvertebrate recovery, even in the seasons (autumn and winter) when biological activity should be reduced. The results suggest the need to redesign e-flows to take into account these sediment impacts if the objectives of e-flows are to be realised.

Experimental Demonstration of 3-Dimensional Flow Structures and Depositional Features in a Lateral Recirculation Zone

NASA Astrophysics Data System (ADS)

Grams, P. E.; Schmeeckle, M. W.; Mueller, E. R.; Buscombe, D.; Kasprak, A.; Leary, K. P.

2016-12-01

The connections between stream hydraulics, geomorphology and ecosystems in mountain rivers have been substantially perturbed by humans, for example through flow regulation related to hydropower activities. It is well known that the ecosystem impacts downstream of hydropower dams may be managed by a properly designed compensation release or environmental flows ("e-flows"), and such flows may also include sediment considerations (e.g. to break up bed armor). However, there has been much less attention given to the ecosystem impacts of water intakes (where water is extracted and transferred for storage and/or power production), even though in many mountain systems such intakes may be prevalent. Flow intakes tend to be smaller than dams and because they fill quickly in the presence of sediment delivery, they often need to be flushed, many times within a day in Alpine glaciated catchments with high sediment yields. The associated short duration "flood" flow is characterised by very high sediment concentrations, which may drastically modify downstream habitat, both during the floods but also due to subsequent accumulation of "legacy" sediment. The impacts on flora and fauna of these systems have not been well studied. In addition, there are no guidelines established that might allow the design of "e-flows" that also treat this sediment problem, something we call "sed-flows". Through an Alpine field example, we quantify the hydrological, geomorphological, and ecosystem impacts of Alpine water transfer systems. The high sediment concentrations of these flushing flows lead to very high rates of channel disturbance downstream, superimposed upon long-term and progressive bed sediment accumulation. Monthly macroinvertebrate surveys over almost a two-year period showed that reductions in the flushing rate reduced rates of disturbance substantially, and led to rapid macroinvertebrate recovery, even in the seasons (autumn and winter) when biological activity should be reduced. The results suggest the need to redesign e-flows to take into account these sediment impacts if the objectives of e-flows are to be realised.

U.S. Immunization program adult immunization activities and resources.

PubMed

Woods, LaDora O; Bridges, Carolyn B; Graitcer, Samuel B; Lamont, Brock

2016-04-02

Adults are recommended to receive vaccines based on their age, medical conditions, prior vaccinations, occupation and lifestyle. However, adult immunization coverage is low in the United States and lags substantially below Healthy People 2020 goals. To assess activities and resources designated for adult immunization programs by state and local health department immunization programs in the United States, we analyzed 2012 and 2013 data from the Centers for Disease Control and Prevention's (CDC) Program Annual Reports and Progress Assessments (PAPA) survey of CDC-funded immunization programs. Fifty-six of 64 funded US immunization programs' responses were included in the analysis. Eighty-two percent of (n = 46) programs reported having a designated adult immunization coordinator in 2012 and 73% (n = 41) in 2013. Of the 46 coordinators reported in 2012, 30% (n = 14) spent more than 50% of their time on adult immunization activities, and only 24% (n = 10) of the 41 adult coordinators in 2013 spent more than 50% of their time on adult immunization activities. In 2012, 23% (n = 13) of the 56 programs had a separate immunization coalition for adults and 68% (n = 38) included adult issues in their overall immunization program coalition. In 2013, 25% (n = 14) had a separate adult immunization coalition while 57% (n = 32) incorporated adult immunizations into their overall immunization program coalition. The results indicate substantial variation across the US in public health infrastructure to support adult immunizations. Continued assessment of adult immunization resources and activities will be important in improving adult immunization coverage levels though program support. With many programs having limited resources dedicated to improving adult immunization rates in the in US, efforts by the health departments to collaborate with providers and other partners in their jurisdictions to increase awareness, increase the use of proven strategies to improve vaccination of adults, and implement the Standards for Adult Immunization Practice may lead to improved adult immunization coverage and fewer illnesses, hospitalizations and deaths from vaccine preventable diseases.

U.S. Immunization program adult immunization activities and resources

PubMed Central

Woods, LaDora O.; Bridges, Carolyn B.; Graitcer, Samuel B.; Lamont, Brock

2016-01-01

ABSTRACT Adults are recommended to receive vaccines based on their age, medical conditions, prior vaccinations, occupation and lifestyle. However, adult immunization coverage is low in the United States and lags substantially below Healthy People 2020 goals. To assess activities and resources designated for adult immunization programs by state and local health department immunization programs in the United States, we analyzed 2012 and 2013 data from the Centers for Disease Control and Prevention's (CDC) Program Annual Reports and Progress Assessments (PAPA) survey of CDC-funded immunization programs. Fifty-six of 64 funded US immunization programs' responses were included in the analysis. Eighty-two percent of (n = 46) programs reported having a designated adult immunization coordinator in 2012 and 73% (n = 41) in 2013. Of the 46 coordinators reported in 2012, 30% (n = 14) spent more than 50% of their time on adult immunization activities, and only 24% (n = 10) of the 41 adult coordinators in 2013 spent more than 50% of their time on adult immunization activities. In 2012, 23% (n = 13) of the 56 programs had a separate immunization coalition for adults and 68% (n = 38) included adult issues in their overall immunization program coalition. In 2013, 25% (n = 14) had a separate adult immunization coalition while 57% (n = 32) incorporated adult immunizations into their overall immunization program coalition. The results indicate substantial variation across the US in public health infrastructure to support adult immunizations. Continued assessment of adult immunization resources and activities will be important in improving adult immunization coverage levels though program support. With many programs having limited resources dedicated to improving adult immunization rates in the in US, efforts by the health departments to collaborate with providers and other partners in their jurisdictions to increase awareness, increase the use of proven strategies to improve vaccination of adults, and implement the Standards for Adult Immunization Practice may lead to improved adult immunization coverage and fewer illnesses, hospitalizations and deaths from vaccine preventable diseases. PMID:26577532

Progress report No. 2, design of new pile area {open_quotes}G,{close_quotes} Project C-300, Atomic Energy Commission Directive HW-104

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowe, P.E.

1950-01-16

This document is the progress report for the design and development of Pile Area {open_quotes}G{close_quotes}, to cover the period June 1, 1949 to December 31, 1949. This project represents the major effort of the Reactor Division of the Design and Construction Divisions. It is being pursued with the aim of being able to incorporate the major project objectives in a finished pile design if that design is begun about January, 1951.

LOW-ENGINE-FRICTION TECHNOLOGY FOR ADVANCED NATURAL-GAS RECIPROCATING ENGINES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Victor Wong; Tian Tian; Luke Moughon

This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis is being followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. To date, a detailed set of piston and piston-ring dynamic and friction models have been developed and applied that illustrate the fundamental relationships among mechanical, surface/material and lubricant design parameters and friction losses. Demonstration of low-friction ring-pack designs in the Waukesha VGFmore » 18GL engine confirmed total engine FEMP (friction mean effective pressure) reduction of 7-10% from the baseline configuration without significantly increasing oil consumption or blow-by flow. This represents a substantial (30-40%) reduction of the ringpack friction alone. The measured FMEP reductions were in good agreement with the model predictions. Further improvements via piston, lubricant, and surface designs offer additional opportunities. Tests of low-friction lubricants are in progress and preliminary results are very promising. The combined analysis of lubricant and surface design indicates that low-viscosity lubricants can be very effective in reducing friction, subject to component wear for extremely thin oils, which can be mitigated with further lubricant formulation and/or engineered surfaces. Hence a combined approach of lubricant design and appropriate wear reduction offers improved potential for minimum engine friction loss. Piston friction studies indicate that a flatter piston with a more flexible skirt, together with optimizing the waviness and film thickness on the piston skirt offer significant friction reduction. Combined with low-friction ring-pack, material and lubricant parameters, a total power cylinder friction reduction of 30-50% is expected, translating to an engine efficiency increase of two percentage points from its current baseline towards the goal of 50% ARES engine efficiency. The design strategies developed in this study have promising potential for application in all modern reciprocating engines as they represent simple, low-cost methods to extract significant fuel savings. The current program has possible spinoffs and applications in other industries as well, including transportation, CHP, and diesel power generation. The progress made in this program has wide engine efficiency implications, and potential deployment of low-friction engine components or lubricants in the near term is possible as current investigations continue.« less

Emergency Medicine

PubMed Central

Binder, Louis S.; Chappell, James A.

1991-01-01

The Scientific Board of the California Medical Association presents the following inventory of items of progress in emergency medicine. Each item, in the judgment of a panel of knowledgeable physicians, has recently become reasonably firmly established, both as to scientific fact and important clinical significance. The items are presented in simple epitome, and an authoritative reference, both to the item itself and to the subject as a whole, is generally given for those who may be unfamiliar with a particular item. The purpose is to assist busy practitioners, students, researchers, or scholars to stay abreast of these items of progress in emergency medicine that have recently achieved a substantial degree of authoritative acceptance, whether in their own field of special interest or another. The items of progress listed below were selected by the Advisory Panel to the Section on Emergency Medicine of the California Medical Association, and the summaries were prepared under its direction. PMID:1949777

Can a poverty-reducing and progressive tax and transfer system hurt the poor?

PubMed

Higgins, Sean; Lustig, Nora

2016-09-01

To analyze anti-poverty policies in tandem with the taxes used to pay for them, comparisons of poverty before and after taxes and transfers are often used. We show that these comparisons, as well as measures of horizontal equity and progressivity, can fail to capture an important aspect: that a substantial proportion of the poor are made poorer (or non-poor made poor) by the tax and transfer system. We illustrate with data from seventeen developing countries: in fifteen, the fiscal system is poverty-reducing and progressive, but in ten of these at least one-quarter of the poor pay more in taxes than they receive in transfers. We call this fiscal impoverishment, and axiomatically derive a measure of its extent. An analogous measure of fiscal gains of the poor is also derived, and we show that changes in the poverty gap can be decomposed into our axiomatic measures of fiscal impoverishment and gains.

Contributions of Peer Support to Health, Health Care, and Prevention: Papers from Peers for Progress.

PubMed

Fisher, Edwin B; Ayala, Guadalupe X; Ibarra, Leticia; Cherrington, Andrea L; Elder, John P; Tang, Tricia S; Heisler, Michele; Safford, Monika M; Simmons, David

2015-08-01

SUBSTANTIAL: evidence documents the benefits of peer support provided by community health workers, lay health advisors, promotores de salud, and others. The papers in this supplement, all supported by the Peers for Progress program of the American Academy of Family Physicians Foundation, contribute to the growing body of literature addressing the efficacy, effectiveness, feasibility, reach, sustainability, and adoption of peer support for diabetes self-management. They and additional papers supported by Peers for Progress contribute to understanding how peer support can be implemented in real world settings. Topics include examination of the peers who provide peer support, reaching the hardly reached, success factors in peer support interventions, proactive approaches, attention to emotions, peer support in behavioral health, dissemination models and their application in China, peer support in the patient-centered medical home, research challenges, and policy implications. © 2015 Annals of Family Medicine, Inc.

Innovations and Challenges in Reducing Maternal Mortality in Tamil Nadu, India

PubMed Central

Padmanaban, P.; Mavalankar, Dileep V.

2009-01-01

Although India has made slow progress in reducing maternal mortality, progress in Tamil Nadu has been rapid. This case study documents how Tamil Nadu has taken initiatives to improve maternal health services leading to reduction in maternal morality from 380 in 1993 to 90 in 2007. Various initiatives include establishment of maternal death registration and audit, establishment and certification of comprehensive emergency obstetric and newborn-care centres, 24-hour x 7-day delivery services through posting of three staff nurses at the primary health centre level, and attracting medical officers to rural areas through incentives in terms of reserved seats in postgraduate studies and others. This is supported by the better management capacity at the state and district levels through dedicated public-health officers. Despite substantial progress, there is some scope for further improvement of quality of infrastructure and services. The paper draws out lessons for other states and countries in the region. PMID:19489416

A progressive gradient moment nulling design technique.

PubMed

Pipe, J G; Chenevert, T L

1991-05-01

A method is presented for designing motion-compensated gradients in a progressive manner. The method is easily applicable to many types of waveforms, and can compensate for any order of motion. It can be implemented graphically or numerically. Underlying theory and examples of its application are provided.

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

2016 Nebraska Higher Education Progress Report

ERIC Educational Resources Information Center

Nebraska's Coordinating Commission for Postsecondary Education, 2016

2016-01-01

The 2016 Nebraska Higher Education Progress Report is the 12th annual progress report designed to provide the Nebraska Legislature with comparative statistics to monitor and evaluate progress toward achieving three key priorities for Nebraska's postsecondary education system. These priorities were developed by the 2003 LR 174 Higher Education Task…

What Is Scientifically-Based Research on Progress Monitoring?

ERIC Educational Resources Information Center

Fuchs, Lynn S.; Fuchs, Douglas

2001-01-01

When teachers use systematic progress monitoring to track their students progress in reading, mathematics, or spelling, they are better able to identify students in need of additional or different forms of instruction, they design stronger instructional programs, and their students achieve better. This document first describes progress monitoring…

Accounting for water quality in monitoring access to safe drinking-water as part of the Millennium Development Goals: lessons from five countries

PubMed Central

Bain, Rob ES; Wright, Jim A; Yang, Hong; Pedley, Steve; Bartram, Jamie K

2012-01-01

Abstract Objective To determine how data on water source quality affect assessments of progress towards the 2015 Millennium Development Goal (MDG) target on access to safe drinking-water. Methods Data from five countries on whether drinking-water sources complied with World Health Organization water quality guidelines on contamination with thermotolerant coliform bacteria, arsenic, fluoride and nitrates in 2004 and 2005 were obtained from the Rapid Assessment of Drinking-Water Quality project. These data were used to adjust estimates of the proportion of the population with access to safe drinking-water at the MDG baseline in 1990 and in 2008 made by the Joint Monitoring Programme for Water Supply and Sanitation, which classified all improved sources as safe. Findings Taking account of data on water source quality resulted in substantially lower estimates of the percentage of the population with access to safe drinking-water in 2008 in four of the five study countries: the absolute reduction was 11% in Ethiopia, 16% in Nicaragua, 15% in Nigeria and 7% in Tajikistan. There was only a slight reduction in Jordan. Microbial contamination was more common than chemical contamination. Conclusion The criterion used by the MDG indicator to determine whether a water source is safe can lead to substantial overestimates of the population with access to safe drinking-water and, consequently, also overestimates the progress made towards the 2015 MDG target. Monitoring drinking-water supplies by recording both access to water sources and their safety would be a substantial improvement. PMID:22461718

Space Launch System Spacecraft and Payload Elements: Making Progress Toward First Launch

NASA Technical Reports Server (NTRS)

Schorr, Andrew A.; Creech, Stephen D.

2016-01-01

Significant and substantial progress continues to be accomplished in the design, development, and testing of the Space Launch System (SLS), the most powerful human-rated launch vehicle the United States has ever undertaken. Designed to support human missions into deep space, SLS is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development directorate. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit, and the Ground Systems Development and Operations program is transforming Kennedy Space Center into next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. SLS will deliver a near-term heavy-lift capability for the nation with its 70 metric ton (t) Block 1 configuration, and will then evolve to an ultimate capability of 130 t. The SLS program marked a major milestone with the successful completion of the Critical Design Review in which detailed designs were reviewed and subsequently approved for proceeding with full-scale production. This marks the first time an exploration class vehicle has passed that major milestone since the Saturn V vehicle launched astronauts in the 1960s during the Apollo program. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS -- Exploration Mission-1 (EM-1), an un-crewed mission to orbit the moon and return. Encompassing hardware qualification, structural testing to validate hardware compliance and analytical modeling, progress in on track to meet the initial targeted launch date in 2018. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. This paper will particularly focus on work taking place at Marshall Space Flight Center (MSFC) and United Launch Alliance in Alabama, where upper stage and adapter elements of the vehicle are being constructed and tested. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) Element serves a key role in achieving SLS goals and objectives. The SPIE element marked a major milestone in 2014 with the first flight of original SLS hardware, the Orion Stage Adapter (OSA) which was used on Exploration Flight Test-1 with a design that will be used again on EM-1. Construction is already underway on the EM-1 Interim Cryogenic Propulsion Stage (ICPS), an in-space stage derived from the Delta Cryogenic Second Stage. Manufacture of the Orion Stage Adapter and the Launch Vehicle Stage Adapter is set to begin at the Friction Stir Facility located at MSFC while structural test articles are either completed (OSA) or nearing completion (Launch Vehicle Stage Adapter). An overview is provided of the launch vehicle capabilities, with a specific focus on SPIE Element qualification/testing progress, as well as efforts to provide access to deep space regions currently not available to the science community through a secondary payload capability utilizing CubeSat-class satellites.

Space Launch System Spacecraft and Payload Elements: Making Progress Toward First Launch

NASA Technical Reports Server (NTRS)

Schorr, Andrew A.; Creech, Stephen D.; Ogles, Michael; Hitt, David

2016-01-01

Significant and substantial progress continues to be accomplished in the design, development, and testing of the Space Launch System (SLS), the most powerful human-rated launch vehicle the United States has ever undertaken. Designed to support human missions into deep space, SLS is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development directorate. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit, and the Ground Systems Development and Operations (GSDO) program is transforming Kennedy Space Center (KSC) into next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. SLS will deliver a near-term heavy-lift capability for the nation with its 70 metric ton Block 1 configuration, and will then evolve to an ultimate capability of 130 metric tons. The SLS program marked a major milestone with the successful completion of the Critical Design Review in which detailed designs were reviewed and subsequently approved for proceeding with full-scale production. This marks the first time an exploration class vehicle has passed that major milestone since the Saturn V vehicle launched astronauts in the 1960s during the Apollo program. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS - Exploration Mission-1 (EM-1), an uncrewed mission to orbit the moon and return, and progress in on track to meet the initial targeted launch date in 2018. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility (MAF) in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. This paper will particularly focus on work taking place at Marshall Space Flight Center (MSFC) and United Launch Alliance (ULA) in Alabama, where upper stage and adapter elements of the vehicle are being constructed and tested. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) Element serves a key role in achieving SLS goals and objectives. The SPIE element marked a major milestone in 2014 with the first flight of original SLS hardware, the Orion Stage Adapter (OSA) which was used on Exploration Flight Test-1 with a design that will be used again on EM-1. Construction is already underway on the EM-1 Interim Cryogenic Propulsion Stage (ICPS), an in-space stage derived from the Delta Cryogenic Second Stage. Manufacture of the Orion Stage Adapter and the Launch Vehicle Stage Adapter is set to begin at the Friction Stir Facility located at MSFC while structural test articles are either completed (OSA) or nearing completion (Launch Vehicle Stage Adapter). An overview is provided of the launch vehicle capabilities, with a specific focus on SPIE Element qualification/testing progress, as well as efforts to provide access to deep space regions currently not available to the science community through a secondary payload capability utilizing CubeSat-class satellites.

Pakistan and the Millennium Development Goals for Maternal and Child Health: progress and the way forward.

PubMed

Rizvi, Arjumand; Bhatti, Zaid; Das, Jai K; Bhutta, Zulfiqar A

2015-04-03

The world has made substantial progress in reducing maternal and child mortality, but many countries are projected to fall short of achieving their Millennium Development Goals (MDGs) 4 and 5 targets. The major objective of this paper is to examine progress in Pakistan in reducing maternal and child mortality and malnutrition over the last two decades. Data from recent national and international surveys suggest that Pakistan lags behind on all of its MDGs related to maternal and child health and, for some indicators especially related to nutrition, the situation has worsened from the baseline of 1990. Progress in addressing key social determinants such as poverty, female education and empowerment has also been slow and unregulated population growth has further compromised progress. There is a need to integrate the various different sectors and programmes to achieve the desired results effectively and efficiently as many of the determinants and influencing factors are outside the health sector. Pakistan has to accelerate improvement of access to maternal health services, particularly contraception, emergency obstetric care and skilled birth attendance; the need to improve maternal and child nutrition cannot be over-emphasised.

STRengthening Analytical Thinking for Observational Studies: the STRATOS initiative

PubMed Central

Sauerbrei, Willi; Abrahamowicz, Michal; Altman, Douglas G; le Cessie, Saskia; Carpenter, James

2014-01-01

The validity and practical utility of observational medical research depends critically on good study design, excellent data quality, appropriate statistical methods and accurate interpretation of results. Statistical methodology has seen substantial development in recent times. Unfortunately, many of these methodological developments are ignored in practice. Consequently, design and analysis of observational studies often exhibit serious weaknesses. The lack of guidance on vital practical issues discourages many applied researchers from using more sophisticated and possibly more appropriate methods when analyzing observational studies. Furthermore, many analyses are conducted by researchers with a relatively weak statistical background and limited experience in using statistical methodology and software. Consequently, even ‘standard’ analyses reported in the medical literature are often flawed, casting doubt on their results and conclusions. An efficient way to help researchers to keep up with recent methodological developments is to develop guidance documents that are spread to the research community at large. These observations led to the initiation of the strengthening analytical thinking for observational studies (STRATOS) initiative, a large collaboration of experts in many different areas of biostatistical research. The objective of STRATOS is to provide accessible and accurate guidance in the design and analysis of observational studies. The guidance is intended for applied statisticians and other data analysts with varying levels of statistical education, experience and interests. In this article, we introduce the STRATOS initiative and its main aims, present the need for guidance documents and outline the planned approach and progress so far. We encourage other biostatisticians to become involved. PMID:25074480

NCI–RTOG Translational Program Strategic Guidelines for the Early-Stage Development of Radiosensitizers

PubMed Central

2013-01-01

The addition of chemotherapeutic agents to ionizing radiation has improved survival in many malignancies. Cure rates may be further improved by adding novel targeted agents to current radiotherapy or radiochemotherapy regimens. Despite promising laboratory data, progress in the clinical development of new drugs with radiation has been limited. To define and address the problems involved, a collaborative effort between individuals within the translational research program of the Radiation Oncology Therapy Group and the National Cancer Institute was established. We discerned challenges to drug development with radiation including: 1) the limited relevance of preclinical work, 2) the pharmaceutical industry’s diminished interest, and 3) the important individual skills and institutional commitments required to ensure a successful program. The differences between early-phase trial designs with and without radiation are noted as substantial. The traditional endpoints for early-phase clinical trials—acute toxicity and maximum-tolerated dose—are of limited value when combining targeted agents with radiation. Furthermore, response rate is not a useful surrogate marker of activity in radiation combination trials.Consequently, a risk-stratified model for drug-dose escalation with radiation is proposed, based upon the known and estimated adverse effects. The guidelines discuss new clinical trial designs, such as the time-to-event continual reassessment method design for phase I trials, randomized phase II “screening” trials, and the use of surrogate endpoints, such as pathological response. It is hoped that by providing a clear pathway, this article will accelerate the rate of drug development with radiation. PMID:23231975

Cancer cachexia: understanding the molecular basis.

PubMed

Argilés, Josep M; Busquets, Sílvia; Stemmler, Britta; López-Soriano, Francisco J

2014-11-01

Cancer cachexia is a devastating, multifactorial and often irreversible syndrome that affects around 50-80% of cancer patients, depending on the tumour type, and that leads to substantial weight loss, primarily from loss of skeletal muscle and body fat. Since cachexia may account for up to 20% of cancer deaths, understanding the underlying molecular mechanisms is essential. The occurrence of cachexia in cancer patients is dependent on the patient response to tumour progression, including the activation of the inflammatory response and energetic inefficiency involving the mitochondria. Interestingly, crosstalk between different cell types ultimately seems to result in muscle wasting. Some of the recent progress in understanding the molecular mechanisms of cachexia may lead to new therapeutic approaches.

Potential use of Plastic Waste as Construction Materials: Recent Progress and Future Prospect

NASA Astrophysics Data System (ADS)

Kamaruddin, M. A.; Abdullah, M. M. A.; Zawawi, M. H.; Zainol, M. R. R. A.

2017-11-01

Plastic associates products based have been considered as the world most consumer packaging solution. However, substantial quantities of plastic consumption have led to exponential increase of plastic derived waste. Recycling of plastic waste as valued added product such as concrete appears as one of promising solution for alternative use of plastic waste. This paper summarized recent progress on the development of concrete mixture which incorporates plastic wastes as partial aggregate replacement during concrete manufacturing. A collection of data from previous studies that have been researched which employed plastic waste in concrete mixtures were evaluated and conclusions are drawn based on the laboratory results of all the mentioned research papers studied.

The social and economic burden of frontotemporal degeneration

PubMed Central

Howard, David H.; Denny, Sharon S.; Dickinson, Susan; Tatton, Nadine

2017-01-01

Objective: To quantify the socioeconomic burden of frontotemporal degeneration (FTD) compared to previously published data for Alzheimer disease (AD). Methods: A 250-item internet survey was administered to primary caregivers of patients with behavioral-variant FTD (bvFTD), primary progressive aphasia, FTD with motor neuron disease, corticobasal syndrome, or progressive supranuclear palsy. The survey included validated scales for disease staging, behavior, activities of daily living, caregiver burden, and health economics, as well as investigator-designed questions to capture patient and caregiver experience with FTD. Results: The entire survey was completed by 674 of 956 respondents (70.5%). Direct costs (2016 US dollars) equaled $47,916 and indirect costs $71,737, for a total annual per-patient cost of $119,654, nearly 2 times higher than reported costs for AD. Patients ≥65 years of age, with later stages of disease, and with bvFTD correlated with higher direct costs, while patients <65 years of age and men were associated with higher indirect costs. An FTD diagnosis produced a mean decrease in household income from $75,000 to $99,000 12 months before diagnosis to $50,000 to $59,999 12 months after diagnosis, resulting from lost days of work and early departure from the workforce. Conclusions: The economic burden of FTD is substantial. Counting productivity-related costs, per-patient costs for FTD appear to be greater than per-patient costs reported for AD. There is a need for biomarkers for accurate and timely diagnosis, effective treatments, and services to reduce this socioeconomic burden. PMID:28978658

BCI2000: a general-purpose brain-computer interface (BCI) system.

PubMed

Schalk, Gerwin; McFarland, Dennis J; Hinterberger, Thilo; Birbaumer, Niels; Wolpaw, Jonathan R

2004-06-01

Many laboratories have begun to develop brain-computer interface (BCI) systems that provide communication and control capabilities to people with severe motor disabilities. Further progress and realization of practical applications depends on systematic evaluations and comparisons of different brain signals, recording methods, processing algorithms, output formats, and operating protocols. However, the typical BCI system is designed specifically for one particular BCI method and is, therefore, not suited to the systematic studies that are essential for continued progress. In response to this problem, we have developed a documented general-purpose BCI research and development platform called BCI2000. BCI2000 can incorporate alone or in combination any brain signals, signal processing methods, output devices, and operating protocols. This report is intended to describe to investigators, biomedical engineers, and computer scientists the concepts that the BC12000 system is based upon and gives examples of successful BCI implementations using this system. To date, we have used BCI2000 to create BCI systems for a variety of brain signals, processing methods, and applications. The data show that these systems function well in online operation and that BCI2000 satisfies the stringent real-time requirements of BCI systems. By substantially reducing labor and cost, BCI2000 facilitates the implementation of different BCI systems and other psychophysiological experiments. It is available with full documentation and free of charge for research or educational purposes and is currently being used in a variety of studies by many research groups.

Monolithic Integrated Radiation Sensor Using Stimulated Luminescence From Alumina

NASA Technical Reports Server (NTRS)

McKeever, S. W. S.; Yukihara, E. G.; Stoebe, T. G.; Chen, T.-C.

2005-01-01

The project goal was to design and test a monolithic integrated device for radiation sensing, using optically stimulated luminescence (OSL) from Al2O3:C. The device would consist of GaN/InGaN-based components epitaxially grown on each side of a A12O3:C substrate. Radiation energy stored in the substrate would be stimulated by visible emission from a GaN light-emitting diode (LED) grown on one side of the device, and the OSL emission from the substrate (in the blue region of the spectrum) would be detected by the InGaN pi-n diode grown on the other side of the substrate. The primary application of the device would be in space radiation environments. Thus, two major research thrusts were launched during this project. Firstly, research at Oklahoma State University (Dr. Stephen W.S. McKeever and Dr. E.G. Yukihara) concentrated on characterization of the OSL properties of Al2O3:C in radiation fields typical of those experienced in low-Earth orbit. Secondly, research at the University of Washington (Co-Is, Dr. T.G. Stoebe and Dr. T. Chen) focused of device development and GaN/InGaN epitaxial growth. While progress in each line of research has been substantial, the ultimate goal (that of producing a working prototype device) has not yet been reached. We detail the research progress and identify outstanding issues in this paper.

Textbook Multigrid Efficiency for Computational Fluid Dynamics Simulations

NASA Technical Reports Server (NTRS)

Brandt, Achi; Thomas, James L.; Diskin, Boris

2001-01-01

Considerable progress over the past thirty years has been made in the development of large-scale computational fluid dynamics (CFD) solvers for the Euler and Navier-Stokes equations. Computations are used routinely to design the cruise shapes of transport aircraft through complex-geometry simulations involving the solution of 25-100 million equations; in this arena the number of wind-tunnel tests for a new design has been substantially reduced. However, simulations of the entire flight envelope of the vehicle, including maximum lift, buffet onset, flutter, and control effectiveness have not been as successful in eliminating the reliance on wind-tunnel testing. These simulations involve unsteady flows with more separation and stronger shock waves than at cruise. The main reasons limiting further inroads of CFD into the design process are: (1) the reliability of turbulence models; and (2) the time and expense of the numerical simulation. Because of the prohibitive resolution requirements of direct simulations at high Reynolds numbers, transition and turbulence modeling is expected to remain an issue for the near term. The focus of this paper addresses the latter problem by attempting to attain optimal efficiencies in solving the governing equations. Typically current CFD codes based on the use of multigrid acceleration techniques and multistage Runge-Kutta time-stepping schemes are able to converge lift and drag values for cruise configurations within approximately 1000 residual evaluations. An optimally convergent method is defined as having textbook multigrid efficiency (TME), meaning the solutions to the governing system of equations are attained in a computational work which is a small (less than 10) multiple of the operation count in the discretized system of equations (residual equations). In this paper, a distributed relaxation approach to achieving TME for Reynolds-averaged Navier-Stokes (RNAS) equations are discussed along with the foundations that form the basis of this approach. Because the governing equations are a set of coupled nonlinear conservation equations with discontinuities (shocks, slip lines, etc.) and singularities (flow- or grid-induced), the difficulties are many. This paper summarizes recent progress towards the attainment of TME in basic CFD simulations.

Traffic and data preparation for AASHTO MEPDG analysis and designs.

DOT National Transportation Integrated Search

2011-10-01

"The Mechanistic Empirical Pavement Design Guide (MEPDG) and the : subsequent AASHTO product DARWin-ME are signifi cant advancements in : pavement design. However, they are substantially more complex than the : 1993 AASHTO Guide, which is currently u...

Analyzing Turkey's Data from TIMSS 2007 to Investigate Regional Disparities in Eighth Grade Science Achievement

ERIC Educational Resources Information Center

Erberber, Ebru

2009-01-01

Turkey is expected to be a full member of the European Union (EU) by 2013. In the course of its integration into the EU, Turkey has been simultaneously facing access, quality, and equity issues in education. Over the past decade, substantial progress has been made on increasing the access. However, improving the country's low level of education…

From Fancy to Reason: Scaling Deaf and Hearing Children's Understanding of Theory of Mind and Pretence

ERIC Educational Resources Information Center

Peterson, Candida C.; Wellman, Henry M.

2009-01-01

We examined deaf and hearing children's progression of steps in theory of mind (ToM) development including their understanding of social pretending. Ninety-three children (33 deaf; 60 hearing) aged 3-13 years were tested on a set of six closely matched ToM tasks. Results showed that deaf children were delayed substantially behind hearing children…

NAEP Validity Studies: Improving the Information Value of Performance Items in Large Scale Assessments. Working Paper No. 2003-08

ERIC Educational Resources Information Center

Pearson, P. David; Garavaglia, Diane R.

2003-01-01

The purpose of this essay is to explore both what is known and what needs to be learned about the information value of performance items "when they are used in large scale assessments." Within the context of the National Assessment of Educational Progress (NAEP), there is substantial motivation for answering these questions. Over the…

Karhunen-Loeve Analysis of SCIGN GPS Data

NASA Technical Reports Server (NTRS)

Rundle, John B.; Tiampo, Kristy; Gross, Susanna

2004-01-01

During the final year of this project, we made substantial progress on the proposed work. Specifically, we have continued the horizontal and vertical Karhunen-Loeve (KL) analysis of SCIGN data and implemented the study of a number of particular modes. In particular, we studied the spatial and temporal interactions of these modes in an effort to better understand and model the source of each signal.

Structural Integrity of Water Reactor Pressure Boundary Components.

DTIC Science & Technology

1979-12-31

fatigue crack growth is also on-going. Substantial progress in all three of the areas - fatigue data generation, fractography and micromechanism... Fractographie Examinations During the past year, there have been several fractographic studies and fractographically-related research efforts which have been...in the T-L orientation were characterized by a m icrostructural texture running parallel to the macroscopic crack propagation direction (Fig. 31). This

In vivo testing of chemicals that undergo substantial biotransformation: An opportunity to advance in vitro-in vivo metabolism extrapolation procedures for fish

EPA Science Inventory

This is one of several keynote presentations given at the beginning of a one-day workshop on in vivo testing with fish. The purpose of this talk is to describe recent progress on using in vitro data to predict metabolism impacts on chemical accumulation by fish. The focus of th...

Missing data in forest ecology and management: advances in quantitative methods [Preface

Treesearch

Tara Barrett; Matti Maltomo

2012-01-01

In recent years, substantial progress has been made for handling missing data issues for applications in forest ecology and management, particularly in the area of imputation techniques. A session on this topic was held at the XXlll IUFRO World Congress in Seoul, South Korea, on August 23-28, 2010, resulting in this special issue of six papers that address recent...

Status of silicon solar cell technology

NASA Technical Reports Server (NTRS)

Brandhorst, H. W., Jr.

1976-01-01

Major progress in solar cell technology leading to increased efficiency has occurred since 1970. Technical approaches leading to this increased output include surface texturing, improved antireflection coatings, reduced grid pattern area coverage, shallow junctions and back surface fields. The status of these developments and their incorporation into cell production is discussed. Future research and technology trends leading to further efficiency increases and substantial cost reductions are described.

Dental Caries Progression Among U.S. Marine Corps Personnel Following Operational Deployment

DTIC Science & Technology

2012-06-01

86 dental faculty members at 16 French universities, Tubert- Jeannin and colleagues37 found wide variation in restorative treatment thresholds...lesions, assessment of restorations, and treatment decisions, which ultimately led to variation in their 27     students’ treatment modalities...almost one-third of all teeth. This substantial variation among practitioners is most likely due to differences in individual practitioners’ criteria

The Relationship between Gross Motor Skills and School Readiness in Early Childhood: Making the Case in South Africa

ERIC Educational Resources Information Center

Sherry, Kate; Draper, Catherine E.

2013-01-01

Early childhood development (ECD) has gained substantial recognition in South Africa (SA) as a key issue to be addressed, but inequities and deficits remain evident, despite progressive policy and widespread effort by a range of role players in the non-governmental sector. ECD in SA requires far more attention if these are to be rectified, and…

Progress on the Design of the Storage Ring Vacuum System for the Advanced Photon Source Upgrade Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stillwell, B.; Billett, B.; Brajuskovic, B.

2017-06-20

Recent work on the design of the storage ring vacuum system for the Advanced Photon Source Upgrade project (APS-U) includes: revising the vacuum system design to accommodate a new lattice with reverse bend magnets, modifying the designs of vacuum chambers in the FODO sections for more intense incident synchrotron radiation power, modifying the design of rf-shielding bellows liners for better performance and reliability, modifying photon absorber designs to make better use of available space, and integrated planning of components needed in the injection, extraction and rf cavity straight sections. An overview of progress in these areas is presented.

Bayesian Optimal Interval Design: A Simple and Well-Performing Design for Phase I Oncology Trials

PubMed Central

Yuan, Ying; Hess, Kenneth R.; Hilsenbeck, Susan G.; Gilbert, Mark R.

2016-01-01

Despite more than two decades of publications that offer more innovative model-based designs, the classical 3+3 design remains the most dominant phase I trial design in practice. In this article, we introduce a new trial design, the Bayesian optimal interval (BOIN) design. The BOIN design is easy to implement in a way similar to the 3+3 design, but is more flexible for choosing the target toxicity rate and cohort size and yields a substantially better performance that is comparable to that of more complex model-based designs. The BOIN design contains the 3+3 design and the accelerated titration design as special cases, thus linking it to established phase I approaches. A numerical study shows that the BOIN design generally outperforms the 3+3 design and the modified toxicity probability interval (mTPI) design. The BOIN design is more likely than the 3+3 design to correctly select the maximum tolerated dose (MTD) and allocate more patients to the MTD. Compared to the mTPI design, the BOIN design has a substantially lower risk of overdosing patients and generally a higher probability of correctly selecting the MTD. User-friendly software is freely available to facilitate the application of the BOIN design. PMID:27407096

Learning Progressions as Evolving Tools in Joint Enterprises for Educational Improvement

ERIC Educational Resources Information Center

Penuel, William R.

2015-01-01

In their article, "Using Learning Progressions to Design Vertical Scales that Support Coherent Inferences about Student Growth," Briggs and Peck (this issue) argue that an important goal of assessment should be "to support coherent and actionable inferences of growth." They suggest that current approaches to test design rely on…

Scanning electron microscopy of chronically implanted intracortical microelectrode arrays in non-human primates

NASA Astrophysics Data System (ADS)

Barrese, James C.; Aceros, Juan; Donoghue, John P.

2016-04-01

Objective. Signal attenuation is a major problem facing intracortical sensors for chronic neuroprosthetic applications. Many studies suggest that failure is due to gliosis around the electrode tips, however, mechanical and material causes of failure are often overlooked. The purpose of this study was to investigate the factors contributing to progressive signal decline by using scanning electron microscopy (SEM) to visualize structural changes in chronically implanted arrays and histology to examine the tissue response at corresponding implant sites. Approach. We examined eight chronically implanted intracortical microelectrode arrays (MEAs) explanted from non-human primates at times ranging from 37 to 1051 days post-implant. We used SEM, in vivo neural recordings, and histology (GFAP, Iba-1, NeuN). Three MEAs that were never implanted were also imaged as controls. Main results. SEM revealed progressive corrosion of the platinum electrode tips and changes to the underlying silicon. The parylene insulation was prone to cracking and delamination, and in some instances the silicone elastomer also delaminated from the edges of the MEA. Substantial tissue encapsulation was observed and was often seen growing into defects in the platinum and parylene. These material defects became more common as the time in vivo increased. Histology at 37 and 1051 days post-implant showed gliosis, disruption of normal cortical architecture with minimal neuronal loss, and high Iba-1 reactivity, especially within the arachnoid and dura. Electrode tracts were either absent or barely visible in the cortex at 1051 days, but were seen in the fibrotic encapsulation material suggesting that the MEAs were lifted out of the brain. Neural recordings showed a progressive drop in impedance, signal amplitude, and viable channels over time. Significance. These results provide evidence that signal loss in MEAs is truly multifactorial. Gliosis occurs in the first few months after implantation but does not prevent useful recordings for several years. Progressive meningeal fibrosis encapsulates and lifts MEAs out of the cortex while ongoing foreign body reactions lead to progressive degradation of the materials. Long-term impedance drops are due to the corrosion of platinum, cracking and delamination of parylene, and delamination of silicone elastomer. Oxygen radicals released by cells of the immune system likely mediate the degradation of these materials. Future MEA designs must address these problems through more durable insulation materials, more inert electrode alloys, and pharmacologic suppression of fibroblasts and leukocytes.

Scanning electron microscopy of chronically implanted intracortical microelectrode arrays in non-human primates

PubMed Central

Barrese, James C; Aceros, Juan; Donoghue, John P

2016-01-01

Objective Signal attenuation is a major problem facing intracortical sensors for chronic neuroprosthetic applications. Many studies suggest that failure is due to gliosis around the electrode tips, however, mechanical and material causes of failure are often overlooked. The purpose of this study was to investigate the factors contributing to progressive signal decline by using scanning electron microscopy (SEM) to visualize structural changes in chronically implanted arrays and histology to examine the tissue response at corresponding implant sites. Approach We examined eight chronically implanted intracortical microelectrode arrays (MEAs) explanted from non-human primates at times ranging from 37 to 1051 days post-implant. We used SEM, in vivo neural recordings, and histology (GFAP, Iba-1, NeuN). Three MEAs that were never implanted were also imaged as controls. Main results SEM revealed progressive corrosion of the platinum electrode tips and changes to the underlying silicon. The parylene insulation was prone to cracking and delamination, and in some instances the silicone elastomer also delaminated from the edges of the MEA. Substantial tissue encapsulation was observed and was often seen growing into defects in the platinum and parylene. These material defects became more common as the time in vivo increased. Histology at 37 and 1051 days post-implant showed gliosis, disruption of normal cortical architecture with minimal neuronal loss, and high Iba-1 reactivity, especially within the arachnoid and dura. Electrode tracts were either absent or barely visible in the cortex at 1051 days, but were seen in the fibrotic encapsulation material suggesting that the MEAs were lifted out of the brain. Neural recordings showed a progressive drop in impedance, signal amplitude, and viable channels over time. Significance These results provide evidence that signal loss in MEAs is truly multifactorial. Gliosis occurs in the first few months after implantation but does not prevent useful recordings for several years. Progressive meningeal fibrosis encapsulates and lifts MEAs out of the cortex while ongoing foreign body reactions lead to progressive degradation of the materials. Long-term impedance drops are due to the corrosion of platinum, cracking and delamination of parylene, and delamination of silicone elastomer. Oxygen radicals released by cells of the immune system likely mediate the degradation of these materials. Future MEA designs must address these problems through more durable insulation materials, more inert electrode alloys, and pharmacologic suppression of fibroblasts and leukocytes. PMID:26824680

Scanning electron microscopy of chronically implanted intracortical microelectrode arrays in non-human primates.

PubMed

Barrese, James C; Aceros, Juan; Donoghue, John P

2016-04-01

Signal attenuation is a major problem facing intracortical sensors for chronic neuroprosthetic applications. Many studies suggest that failure is due to gliosis around the electrode tips, however, mechanical and material causes of failure are often overlooked. The purpose of this study was to investigate the factors contributing to progressive signal decline by using scanning electron microscopy (SEM) to visualize structural changes in chronically implanted arrays and histology to examine the tissue response at corresponding implant sites. We examined eight chronically implanted intracortical microelectrode arrays (MEAs) explanted from non-human primates at times ranging from 37 to 1051 days post-implant. We used SEM, in vivo neural recordings, and histology (GFAP, Iba-1, NeuN). Three MEAs that were never implanted were also imaged as controls. SEM revealed progressive corrosion of the platinum electrode tips and changes to the underlying silicon. The parylene insulation was prone to cracking and delamination, and in some instances the silicone elastomer also delaminated from the edges of the MEA. Substantial tissue encapsulation was observed and was often seen growing into defects in the platinum and parylene. These material defects became more common as the time in vivo increased. Histology at 37 and 1051 days post-implant showed gliosis, disruption of normal cortical architecture with minimal neuronal loss, and high Iba-1 reactivity, especially within the arachnoid and dura. Electrode tracts were either absent or barely visible in the cortex at 1051 days, but were seen in the fibrotic encapsulation material suggesting that the MEAs were lifted out of the brain. Neural recordings showed a progressive drop in impedance, signal amplitude, and viable channels over time. These results provide evidence that signal loss in MEAs is truly multifactorial. Gliosis occurs in the first few months after implantation but does not prevent useful recordings for several years. Progressive meningeal fibrosis encapsulates and lifts MEAs out of the cortex while ongoing foreign body reactions lead to progressive degradation of the materials. Long-term impedance drops are due to the corrosion of platinum, cracking and delamination of parylene, and delamination of silicone elastomer. Oxygen radicals released by cells of the immune system likely mediate the degradation of these materials. Future MEA designs must address these problems through more durable insulation materials, more inert electrode alloys, and pharmacologic suppression of fibroblasts and leukocytes.

Biomarkers Predicting Progression of Human Immunodeficiency Virus-Related Disease

PubMed Central

Kanekar, Amar

2010-01-01

Biomarkers in predicting the progression of HIV infected individuals to a state of HIV disease (AIDS) are studied over more than a decade. Use of surrogate markers in the past for tracking clinical progression of the disease was limited, as little knowledge existed about the disease. The aim of this review was to address various changes in biomarker related studies taking place over the last five years, especially the trend towards use of newer biomarkers and experimentation with novel molecules in a quest for halting HIV disease progression. An open search of PUBMED database was made with search 'key words' such as 'Biomarkers' and 'AIDS (Acquired Immunodeficiency Syndrome)'.The following were the inclusion criteria for articles: a) all articles published in English language, b) years of publication between 2002-2008 and c) articles limited to adult population. This yielded a total of 417 articles. The criteria used for further judging these studies considered a) type of research design, b) number of biomarkers studied, c) validity of the biomarkers, d) techniques to assess the biomarkers and the impact of the studies in furthering biomarker research, e) sample size for the studies and f) article title or abstracts having the following key words 'biomarker' or 'biomarkers' and 'predict progression to AIDS'. A total of 27 abstracts were reviewed and 12 studies met the above criteria. These 12 different studies consisted of three reviews, four cohort designs, three cross-sectional designs, one each of an observational, and an in-vitro design. The various biomarkers emerging as a results were primarily a mix of viral, neural, immunological, HLA (human leukocyte antigen) markers along with lymphocyte counts. Although there have been quite a few advancements in biomarker-related studies, majority of the novel biomarkers discovered need to be further evaluated and replicated in bigger, long-term efficacy trials. Efforts should also be made to discover newer genetic markers of disease progression. Biomarker feedback, a new concept, can be utilized in future studies addressing prevention of HIV infection or halting disease progression. Keywords Biomarkers; Progression; Designs; HIV; AIDS; Validity PMID:21811520

Artificial intelligence and design: Opportunities, research problems and directions

NASA Technical Reports Server (NTRS)

Amarel, Saul

1990-01-01

The issues of industrial productivity and economic competitiveness are of major significance in the U.S. at present. By advancing the science of design, and by creating a broad computer-based methodology for automating the design of artifacts and of industrial processes, we can attain dramatic improvements in productivity. It is our thesis that developments in computer science, especially in Artificial Intelligence (AI) and in related areas of advanced computing, provide us with a unique opportunity to push beyond the present level of computer aided automation technology and to attain substantial advances in the understanding and mechanization of design processes. To attain these goals, we need to build on top of the present state of AI, and to accelerate research and development in areas that are especially relevant to design problems of realistic complexity. We propose an approach to the special challenges in this area, which combines 'core work' in AI with the development of systems for handling significant design tasks. We discuss the general nature of design problems, the scientific issues involved in studying them with the help of AI approaches, and the methodological/technical issues that one must face in developing AI systems for handling advanced design tasks. Looking at basic work in AI from the perspective of design automation, we identify a number of research problems that need special attention. These include finding solution methods for handling multiple interacting goals, formation problems, problem decompositions, and redesign problems; choosing representations for design problems with emphasis on the concept of a design record; and developing approaches for the acquisition and structuring of domain knowledge with emphasis on finding useful approximations to domain theories. Progress in handling these research problems will have major impact both on our understanding of design processes and their automation, and also on several fundamental questions that are of intrinsic concern to AI. We present examples of current AI work on specific design tasks, and discuss new directions of research, both as extensions of current work and in the context of new design tasks where domain knowledge is either intractable or incomplete. The domains discussed include Digital Circuit Design, Mechanical Design of Rotational Transmissions, Design of Computer Architectures, Marine Design, Aircraft Design, and Design of Chemical Processes and Materials. Work in these domains is significant on technical grounds, and it is also important for economic and policy reasons.

NASA Multidisciplinary Design and Analysis Fellowship Program

NASA Technical Reports Server (NTRS)

1995-01-01

This report is a Year 1 interim report of the progress on the NASA multidisciplinary Design and Analysis Fellowship Program covering the period, January 1, 1995 through September 30, 1995. It summarizes progress in establishing the MDA Fellowship Program at Georgia Tech during the initial year. Progress in the advertisement of the program, recruiting results for the 1995-96 academic year, placement of the Fellows in industry during Summer 1995, program development at the M.S. and Ph.D. levels, and collaboration and dissemination of results are summarized in this report. Further details of the first year's progress will be included in the report from the Year 1 Workshop to be held at NASA Langley on December 7-8, 1995.

Fish biorobotics: kinematics and hydrodynamics of self-propulsion.

PubMed

Lauder, George V; Anderson, Erik J; Tangorra, James; Madden, Peter G A

2007-08-01

As a result of years of research on the comparative biomechanics and physiology of moving through water, biologists and engineers have made considerable progress in understanding how animals moving underwater use their muscles to power movement, in describing body and appendage motion during propulsion, and in conducting experimental and computational analyses of fluid movement and attendant forces. But it is clear that substantial future progress in understanding aquatic propulsion will require new lines of attack. Recent years have seen the advent of one such new avenue that promises to greatly broaden the scope of intellectual opportunity available to researchers: the use of biorobotic models. In this paper we discuss, using aquatic propulsion in fishes as our focal example, how using robotic models can lead to new insights in the study of aquatic propulsion. We use two examples: (1) pectoral fin function, and (2) hydrodynamic interactions between dorsal and caudal fins. Pectoral fin function is characterized by considerable deformation of individual fin rays, as well as spanwise (along the length) and chordwise (across the fin) deformation and area change. The pectoral fin can generate thrust on both the outstroke and instroke. A robotic model of the pectoral fin replicates this result, and demonstrates the effect of altering stroke kinematics on the pattern of force production. The soft dorsal fin of fishes sheds a distinct vortex wake that dramatically alters incoming flow to the tail: the dorsal fin and caudal fin act as dual flapping foils in series. This design can be replicated with a dual-foil flapping robotic device that demonstrates this phenomenon and allows examination of regions of the flapping performance space not available to fishes. We show how the robotic flapping foil device can also be used to better understand the significance of flexible propulsive surfaces for locomotor performance. Finally we emphasize the utility of self-propelled robotic devices as a means of understanding how locomotor forces are generated, and review different conceptual designs for robotic models of aquatic propulsion.

Design for progressive fracture in composite shell structures

NASA Technical Reports Server (NTRS)

Minnetyan, Levon; Murthy, Pappu L. N.

1992-01-01

The load carrying capability and structural behavior of composite shell structures and stiffened curved panels are investigated to provide accurate early design loads. An integrated computer code is utilized for the computational simulation of composite structural degradation under practical loading for realistic design. Damage initiation, growth, accumulation, and propagation to structural fracture are included in the simulation. Progressive fracture investigations providing design insight for several classes of composite shells are presented. Results demonstrate the significance of local defects, interfacial regions, and stress concentrations on the structural durability of composite shells.

Applying Item Response Theory methods to design a learning progression-based science assessment

NASA Astrophysics Data System (ADS)

Chen, Jing

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1) how to use items in different formats to classify students into levels on the learning progression, (2) how to design a test to give good information about students' progress through the learning progression of a particular construct and (3) what characteristics of test items support their use for assessing students' levels. Data used for this study were collected from 1500 elementary and secondary school students during 2009--2010. The written assessment was developed in several formats such as the Constructed Response (CR) items, Ordered Multiple Choice (OMC) and Multiple True or False (MTF) items. The followings are the main findings from this study. The OMC, MTF and CR items might measure different components of the construct. A single construct explained most of the variance in students' performances. However, additional dimensions in terms of item format can explain certain amount of the variance in student performance. So additional dimensions need to be considered when we want to capture the differences in students' performances on different types of items targeting the understanding of the same underlying progression. Items in each item format need to be improved in certain ways to classify students more accurately into the learning progression levels. This study establishes some general steps that can be followed to design other learning progression-based tests as well. For example, first, the boundaries between levels on the IRT scale can be defined by using the means of the item thresholds across a set of good items. Second, items in multiple formats can be selected to achieve the information criterion at all the defined boundaries. This ensures the accuracy of the classification. Third, when item threshold parameters vary a bit, the scoring rubrics and the items need to be reviewed to make the threshold parameters similar across items. This is because one important design criterion of the learning progression-based items is that ideally, a student should be at the same level across items, which means that the item threshold parameters (d1, d 2 and d3) should be similar across items. To design a learning progression-based science assessment, we need to understand whether the assessment measures a single construct or several constructs and how items are associated with the constructs being measured. Results from dimension analyses indicate that items of different carbon transforming processes measure different aspects of the carbon cycle construct. However, items of different practices assess the same construct. In general, there are high correlations among different processes or practices. It is not clear whether the strong correlations are due to the inherent links among these process/practice dimensions or due to the fact that the student sample does not show much variation in these process/practice dimensions. Future data are needed to examine the dimensionalities in terms of process/practice in detail. Finally, based on item characteristics analysis, recommendations are made to write more discriminative CR items and better OMC, MTF options. Item writers can follow these recommendations to write better learning progression-based items.

Progress toward the development of dual junction GaAs/Ge solar cells

NASA Technical Reports Server (NTRS)

Lillington, D. R.; Krut, D. D.; Cavicchi, B. T.; Ralph, E.; Chung, M.

1991-01-01

Large area GaAs/Ge cells offer substantial promise for increasing the power output from existing silicon solar array designs and for providing an enabled technology for missions hitherto impossible using silicon. Single junction GaAs/Ge cells offer substantial advantages in both size, weight, and cost compared to GaAs cells but the efficiency is limited to approximately 19.2 to 20 percent AMO. The thermal absorptance of GaAs/Ge cells is also worse than GaAs/GaAs cells (0.88 vs 0.81 typ.) due to the absorption in the Ge substrate. On the other hand dual junction GaAs/Ge cells offer efficiencies up to ultimately 24 percent AMO in sizes up to 8 x 8 cm but there are still technological issues remaining to achieve current matching in the GaAs and Ge cells. This can be achieved through tuned antireflection (AR) coatings, improved quality of the GaAs growth, improved quality Ge wafers and the use of a Back Surface Field (BSF)/Back Surface Reflector (BSR) in the Ge cell. Although the temperature coefficients of efficiency and voltage are higher for dual junction GaAs/Ge cells, it has been shown elsewhere that for typical 28 C cell efficiencies of 22 percent (dual junction) vs 18.5 percent (single junction) there is a positive power tradeoff up to temperatures as high as 120 C. Due to the potential ease of fabrication of GaAs/Ge dual junction cells there is likely to be only a small cost differential compared to single junction cells.

The role of environmental and individual characteristics in the development of student achievement: a comparison between a traditional and a problem-based-learning curriculum.

PubMed

Schauber, Stefan K; Hecht, Martin; Nouns, Zineb M; Kuhlmey, Adelheid; Dettmer, Susanne

2015-10-01

In medical education, the effect of the educational environment on student achievement has primarily been investigated in comparisons between traditional and problem-based learning (PBL) curricula. As many of these studies have reached no clear conclusions on the superiority of the PBL approach, the effect of curricular reform on student performance remains an issue. We employed a theoretical framework that integrates antecedents of student achievement from various psychosocial domains to examine how students interact with their curricular environment. In a longitudinal study with N = 1,646 participants, we assessed students in a traditional and a PBL-centered curriculum. The measures administered included students' perception of the learning environment, self-efficacy beliefs, positive study-related affect, social support, indicators of self-regulated learning, and academic achievement assessed through progress tests. We compared the relations between these characteristics in the two curricular environments. The results are two-fold. First, substantial relations of various psychosocial domains and their associations with achievement were identified. Second, our analyses indicated that there are no substantial differences between traditional and PBL-based curricula concerning the relational structure of psychosocial variables and achievement. Drawing definite conclusions on the role of curricular-level interventions in the development of student's academic achievement is constrained by the quasi-experimental design as wells as the selection of variables included. However, in the specific context described here, our results may still support the view of student activity as the key ingredient in the acquisition of achievement and performance.

40 CFR 53.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... substantial deviations from the design specifications of the sampler specified for reference methods in... general requirements as an ISO 9001-registered facility for the design and manufacture of designated... capable of automatically collecting a series of sequential samples. NO means nitrogen oxide. NO 2 means...

Communication Design Education: Could Nine Reflections Be Sufficient?

ERIC Educational Resources Information Center

van der Waarde, Karel; Vroombout, Maurits

2012-01-01

Situation: Graphic design education is subject to substantial changes. Changes in professional practice and higher education aggravate insecurities about the contents and structure of courses, assessment criteria, relations between practice, research and theory and teaching methods. Assumption: Graphic design education (visual communication design…

Role of phenotypic and genetic testing in managing clopidogrel therapy.

PubMed

Chan, Noel C; Eikelboom, John W; Ginsberg, Jeffrey S; Lauw, Mandy N; Vanassche, Thomas; Weitz, Jeffrey I; Hirsh, Jack

2014-07-31

The P2Y12 inhibitors, clopidogrel, prasugrel, and ticagrelor, are administered in fixed doses without laboratory monitoring. Randomized trials in acute coronary syndrome have shown that prasugrel and ticagrelor are more effective than standard-dose clopidogrel. Nonetheless, standard-dose clopidogrel remains widely used because it causes less bleeding and is less expensive. Patients treated with standard-dose clopidogrel have substantial variability in platelet inhibition, which is partly explained by genetic polymorphisms encoding CYP2C19, the hepatic enzyme involved in biotransformation of clopidogrel to its active metabolite. Some advocate tailoring P2Y12 inhibitor therapy according to the results of routine laboratory testing. Although there is good evidence for analytic, biological, and clinical validity of several phenotypic and genotypic biomarkers, the benefit of a management strategy that incorporates routine biomarker testing over standard of care without such testing remains unproven. Appropriately designed, adequately powered trials are needed but face the challenges of feasibility, cost, and the progressive switch from clopidogrel to prasugrel or ticagrelor. © 2014 by The American Society of Hematology.

The concept, reality and utility of single-site heterogeneous catalysts (SSHCs).

PubMed

Thomas, John Meurig

2014-05-07

Very substantial advances have recently been made in the design and construction of solid catalysts and in elucidating both their mode of operation and the factors that determine their selectivity and longevity. This Perspective explains how and why such progress has been made. One important factor, the deployment of single-site heterogeneous and enzymatic catalysts, used either alone or in conjunction with other strategies, including metabolic engineering, enables a multitude of new products (for example, environmentally clean jet fuel) to be readily manufactured. In a practical sense SSHCs enable the advantages of homogeneous and to a lesser degree enzymatic catalysts to be united with those of heterogeneous ones. With the aid of the vastly increasing families of nanoporous solids, desired catalytically active sites may be engineered in atomic detail on their inner, accessible surfaces, thereby opening up new possibilities in synthetic organic chemistry - as in the smooth formation of C-C and C[double bond, length as m-dash]N bonds in a number of intermolecular reactions - as well as in photocatalysts and in fluidized catalytic cracking of hydrocarbons.

The applications of model-based geostatistics in helminth epidemiology and control.

PubMed

Magalhães, Ricardo J Soares; Clements, Archie C A; Patil, Anand P; Gething, Peter W; Brooker, Simon

2011-01-01

Funding agencies are dedicating substantial resources to tackle helminth infections. Reliable maps of the distribution of helminth infection can assist these efforts by targeting control resources to areas of greatest need. The ability to define the distribution of infection at regional, national and subnational levels has been enhanced greatly by the increased availability of good quality survey data and the use of model-based geostatistics (MBG), enabling spatial prediction in unsampled locations. A major advantage of MBG risk mapping approaches is that they provide a flexible statistical platform for handling and representing different sources of uncertainty, providing plausible and robust information on the spatial distribution of infections to inform the design and implementation of control programmes. Focussing on schistosomiasis and soil-transmitted helminthiasis, with additional examples for lymphatic filariasis and onchocerciasis, we review the progress made to date with the application of MBG tools in large-scale, real-world control programmes and propose a general framework for their application to inform integrative spatial planning of helminth disease control programmes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Lunar He-3, fusion propulsion, and space development

NASA Technical Reports Server (NTRS)

Santarius, John F.

1992-01-01

The recent identification of a substantial lunar resource of the fusion energy fuel He-3 may provide the first terrestrial market for a lunar commodity and, therefore, a major impetus to lunar development. The impact of this resource-when burned in D-He-3 fusion reactors for space power and propulsion-may be even more significant as an enabling technology for safe, efficient exploration and development of space. One possible reactor configuration among several options, the tandem mirror, illustrates the potential advantages of fusion propulsion. The most important advantage is the ability to provide either fast, piloted vessels or high-payload-fraction cargo vessels due to a range of specific impulses from 50 sec to 1,000,000 sec at thrust-to-weight ratios from 0.1 to 5x10(exp -5). Fusion power research has made steady, impressive progress. It is plausible, and even probable, that fusion rockets similar to the designs presented here will be available in the early part of the twenty-first century, enabling a major expansion of human presence into the solar system.

Evolution of a Materials Data Infrastructure

NASA Astrophysics Data System (ADS)

Warren, James A.; Ward, Charles H.

2018-06-01

The field of materials science and engineering is writing a new chapter in its evolution, one of digitally empowered materials discovery, development, and deployment. The 2008 Integrated Computational Materials Engineering (ICME) study report helped usher in this paradigm shift, making a compelling case and strong recommendations for an infrastructure supporting ICME that would enable access to precompetitive materials data for both scientific and engineering applications. With the launch of the Materials Genome Initiative in 2011, which drew substantial inspiration from the ICME study, digital data was highlighted as a core component of a Materials Innovation Infrastructure, along with experimental and computational tools. Over the past 10 years, our understanding of what it takes to provide accessible materials data has matured and rapid progress has been made in establishing a Materials Data Infrastructure (MDI). We are learning that the MDI is essential to eliminating the seams between experiment and computation by providing a means for them to connect effortlessly. Additionally, the MDI is becoming an enabler, allowing materials engineering to tie into a much broader model-based engineering enterprise for product design.

Substantiation of International Nanomaterials Security Group Creation

NASA Astrophysics Data System (ADS)

Sosnov, A.; Sadovnikov, S.; Panfilov, S.; Magarshak, Yu.

Nanotechnology has achieved the status as one of the critical R&D area. Scientists use the unique properties of atomic and molecular assemblages built at the nanometer scale. The ability to manipulate the physical, chemical, and biological properties of molecules and particles affords to design agents with set up properties. But the technology allows creating not only useful agents. Possible accidental or deliberate creation of new nanoparticles (NPs) with dangerous properties is highly probable minor product of progress in the new area. The article briefly describes some pathways in development and implementation of NPs for medicinal and the similar purposes. Some of NPs can effective facilitate and mask transport of various agents in various environments. Possible creation of new dangerous NPs (e.g. conjugates based on combination of extensively use NPs and chemical, biological and radioactive agents) as well as creation of brand new NPs and nanodevices with unique properties needs creation of international multidiscipline community for security evaluation of nanomaterials and technologies. The community will forecast possible dangerous unexpectedness in the field of nanoscale materials and devices and suggests rational pathways for prevention of the threats.

Design considerations and validation of the MSTAR absolute metrology system

NASA Astrophysics Data System (ADS)

Peters, Robert D.; Lay, Oliver P.; Dubovitsky, Serge; Burger, Johan; Jeganathan, Muthu

2004-08-01

Absolute metrology measures the actual distance between two optical fiducials. A number of methods have been employed, including pulsed time-of-flight, intensity-modulated optical beam, and two-color interferometry. The rms accuracy is currently limited to ~5 microns. Resolving the integer number of wavelengths requires a 1-sigma range accuracy of ~0.1 microns. Closing this gap has a large pay-off: the range (length measurement) accuracy can be increased substantially using the unambiguous optical phase. The MSTAR sensor (Modulation Sideband Technology for Absolute Ranging) is a new system for measuring absolute distance, capable of resolving the integer cycle ambiguity of standard interferometers, and making it possible to measure distance with sub-nanometer accuracy. In this paper, we present recent experiments that use dispersed white light interferometry to independently validate the zero-point of the system. We also describe progress towards reducing the size of optics, and stabilizing the laser wavelength for operation over larger target ranges. MSTAR is a general-purpose tool for conveniently measuring length with much greater accuracy than was previously possible, and has a wide range of possible applications.

Anion exchange membrane fuel cells: Current status and remaining challenges

NASA Astrophysics Data System (ADS)

Gottesfeld, Shimshon; Dekel, Dario R.; Page, Miles; Bae, Chulsung; Yan, Yushan; Zelenay, Piotr; Kim, Yu Seung

2018-01-01

The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. In this perspective article, we describe the current status of AEMFCs as having reached beginning of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. These perspectives may provide useful insights for the development of next-generation of AEMFCs.

Stress reduction programs in patients with elevated blood pressure: a systematic review and meta-analysis.

PubMed

Rainforth, Maxwell V; Schneider, Robert H; Nidich, Sanford I; Gaylord-King, Carolyn; Salerno, John W; Anderson, James W

2007-12-01

Substantial evidence indicates that psychosocial stress contributes to hypertension and cardiovascular disease (CVD). Previous meta-analyses of stress reduction and high blood pressure (BP) were outdated and/or methodologically limited. Therefore, we conducted an updated systematic review of the published literature and identified 107 studies on stress reduction and BP. Seventeen trials with 23 treatment comparisons and 960 participants with elevated BP met criteria for well-designed randomized controlled trials and were replicated within intervention categories. Meta-analysis was used to calculate BP changes for biofeedback, -0.8/-2.0 mm Hg (P = NS); relaxation-assisted biofeedback, +4.3/+2.4 mm Hg (P = NS); progressive muscle relaxation, -1.9/-1.4 mm Hg (P = NS); stress management training, -2.3/-1.3 mm (P = NS); and the Transcendental Meditation program, -5.0/-2.8 mm Hg (P = 0.002/0.02). Available evidence indicates that among stress reduction approaches, the Transcendental Meditation program is associated with significant reductions in BP. Related data suggest improvements in other CVD risk factors and clinical outcomes.

Academic College of Emergency Experts in India's INDO-US Joint Working Group and OPUS12 Foundation Consensus Statement on Creating A Coordinated, Multi-Disciplinary, Patient-Centered, Global Point-of-Care Biomarker Discovery Network.

PubMed

Stawicki, Stanislaw P; Stoltzfus, Jill C; Aggarwal, Praveen; Bhoi, Sanjeev; Bhatt, Shashi; Kalra, O P; Bhalla, Ashish; Hoey, Brian A; Galwankar, Sagar C; Paladino, Lorenzo; Papadimos, Thomas J

2014-07-01

Biomarker science brings great promise to clinical medicine. This is especially true in the era of technology miniaturization, rapid dissemination of knowledge, and point-of-care (POC) implementation of novel diagnostics. Despite this tremendous progress, the journey from a candidate biomarker to a scientifically validated biomarker continues to be an arduous one. In addition to substantial financial resources, biomarker research requires considerable expertise and a multidisciplinary approach. Investigational designs must also be taken into account, with the randomized controlled trial remaining the "gold standard". The authors present a condensed overview of biomarker science and associated investigational methods, followed by specific examples from clinical areas where biomarker development and/or implementation resulted in tangible enhancements in patient care. This manuscript also serves as a call to arms for the establishment of a truly global, well-coordinated infrastructure dedicated to biomarker research and development, with focus on delivery of the latest discoveries directly to the patient via point-of-care technology.

The deep underground science and engineering laboratory at Homestake

NASA Astrophysics Data System (ADS)

Lesko, Kevin T.

2009-06-01

The US National Science Foundation and the US underground science community are well into the campaign to establish a world-class, multi-disciplinary deep underground science and engineering laboratory — DUSEL. The NSF's review committee, following the first two NSF solicitations, selected Homestake as the prime site to be developed into an international, multidisciplinary, world-class research facility. Homestake DUSEL will provide much needed underground research space to help relieve the worldwide shortage, particularly at great depth, and will develop research campuses at different depths to satisfy the research requirements for the coming decades. The State of South Dakota has demonstrated remarkable support for the project and has secured the site with the transfer of the former Homestake Gold Mine and has initiated re-entry and rehabilitation of the facility to host a modest interim science program with state funds and those from a substantial philanthropic donor. I review the scientific case for DUSEL and the progress in developing the preliminary design of DUSEL in Homestake and the initial suite of experiments to be funded along with the facility.