Goal-seismic computer programs in BASIC: Part I; Store, plot, and edit array data

USGS Publications Warehouse

Hasbrouck, Wilfred P.

1979-01-01

Processing of geophysical data taken with the U.S. Geological Survey's coal-seismic system is done with a desk-top, stand-alone computer. Programs for this computer are written in an extended BASIC language specially augmented for acceptance by the Tektronix 4051 Graphic System. This report presents five computer programs used to store, plot, and edit array data for the line, cross, and triangle arrays commonly employed in our coal-seismic investigations. * Use of brand names in this report is for descriptive purposes only and does not constitute endorsement by the U.S. Geological Survey.

The spinal posture of computing adolescents in a real-life setting

PubMed Central

2014-01-01

Background It is assumed that good postural alignment is associated with the less likelihood of musculoskeletal pain symptoms. Encouraging good sitting postures have not reported consequent musculoskeletal pain reduction in school-based populations, possibly due to a lack of clear understanding of good posture. Therefore this paper describes the variability of postural angles in a cohort of asymptomatic high-school students whilst working on desk-top computers in a school computer classroom and to report on the relationship between the postural angles and age, gender, height, weight and computer use. Methods The baseline data from a 12 month longitudinal study is reported. The study was conducted in South African school computer classrooms. 194 Grade 10 high-school students, from randomly selected high-schools, aged 15–17 years, enrolled in Computer Application Technology for the first time, asymptomatic during the preceding month, and from whom written informed consent were obtained, participated in the study. The 3D Posture Analysis Tool captured five postural angles (head flexion, neck flexion, cranio-cervical angle, trunk flexion and head lateral bend) while the students were working on desk-top computers. Height, weight and computer use were also measured. Individual and combinations of postural angles were analysed. Results 944 Students were screened for eligibility of which the data of 194 students are reported. Trunk flexion was the most variable angle. Increased neck flexion and the combination of increased head flexion, neck flexion and trunk flexion were significantly associated with increased weight and BMI (p = 0.0001). Conclusions High-school students sit with greater ranges of trunk flexion (leaning forward or reclining) when using the classroom computer. Increased weight is significantly associated with increased sagittal plane postural angles. PMID:24950887

Offshore survey provides answers to coastal stability and potential offshore extensions of landslides into Abalone Cove, Palos Verdes peninsula, Calif

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dill, R.F.; Slosson, J.E.

1993-04-01

The configuration and stability of the present coast line near Abalone Cove, on the south side of Palos Verdes Peninsula, California is related to the geology, oceanographic conditions, and recent and ancient landslide activity. This case study utilizes offshore high resolution seismic profiles, side-scan sonar, diving, and coring, to relate marine geology to the stability of a coastal region with known active landslides utilizing a desk top computer and off-the-shelf software. Electronic navigation provided precise positioning that when applied to computer generated charts permitted correlation of survey data needed to define the offshore geology and sea floor sediment patterns. Amore » mackintosh desk-top computer and commercially available off-the-shelf software provided the analytical tools for constructing a base chart and a means to superimpose template overlays of topography, isopachs or sediment thickness, bottom roughness and sediment distribution patterns. This composite map of offshore geology and oceanography was then related to an extensive engineering and geological land study of the coastal zone forming Abalone Cove, an area of active landslides. Vibrocoring provided ground sediment data for high resolution seismic traverses. This paper details the systems used, present findings relative to potential landslide movements, coastal erosion and discuss how conclusions were reached to determine whether or not onshore landslide failures extend offshore.« less

Reducing nurses'. Workload using a computerized nursing support system linked to the hospital information system.

PubMed

Ito, C; Satoh, I; Michiya, H; Kitayama, Y; Miyazaki, K; Ota, S; Satoh, H; Sakurai, T; Shirato, H; Miyasaka, K

1997-01-01

A computerised nursing support system (CNSS) linked to the hospital information system (HIS) was developed and has been in use for one year, in order to reduce the workload of nurses. CNSS consists of (1) a hand held computer for each nurse (2) desk-top computers in the nurses' station and doctors' rooms (3) a data server (4) an interface with the main hospital information system. Nurses enter vital signs, food intake and other information about the patients into the hand held computer at the bed-side. The information is then sent automatically to the CNSS data server, which also receives patients' details (prescribed medicines etc.) from the HIS. Nurses and doctors can see all the information on the desk-top and hand held computers. This system was introduced in May 1995 into a university hospital ward with 40 beds. A questionnaire was completed by 23 nurses before and after the introduction of CNSS. The mean time required to post vital data was significantly reduced from 121 seconds to 54 seconds (p < 0.01). After three months 30% of nurses felt CNSS had reduced their workload, while 30% felt it had complicated their work; after five months 70% noted a reduction and 0% reported that CNSS had made their work more complex. The study therefore concludes that the interface between a computerised nursing support system and the hospital information system reduced the workload of nurses.

The impact of computer display height and desk design on muscle activity during information technology work by young adults.

PubMed

Straker, L; Pollock, C; Burgess-Limerick, R; Skoss, R; Coleman, J

2008-08-01

Computer display height and desk design are believed to be important workstation features and are included in international standards and guidelines. However, the evidence base for these guidelines is lacking a comparison of neck/shoulder muscle activity during computer and paper tasks and whether forearm support can be provided by desk design. This study measured the spinal and upper limb muscle activity in 36 young adults whilst they worked in different computer display, book and desk conditions. Display height affected spinal muscle activity with paper tasks resulting in greater mean spinal and upper limb muscle activity. A curved desk resulted in increased proximal muscle activity. There was no substantial interaction between display and desk.

Portable appliance security apparatus

NASA Technical Reports Server (NTRS)

Kerley, J. J. (Inventor)

1981-01-01

An apparatus for securing a small computer, or other portable appliance, against theft is described. It is comprised of a case having an open back through which the computer is installed or removed. Guide members in the form of slots are formed in a rear portion of opposite walls of the case for receiving a back plate to cover the opening and thereby secure the computer within the case. An opening formed in the top wall of the case exposes the keyboard and display of the computer. The back plate is locked in the closed position by a key-operated plug type lock. The lock is attached to one end of a hold down cable, the opposite end thereof being secured to a desk top or other stationary object. Thus, the lock simultaneously secures the back plate to the case and retains the case to the stationary object.

Maximum life spur gear design

NASA Technical Reports Server (NTRS)

Savage, M.; Mackulin, M. J.; Coe, H. H.; Coy, J. J.

1991-01-01

Optimization procedures allow one to design a spur gear reduction for maximum life and other end use criteria. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial guess values. The optimization algorithm is described, and the models for gear life and performance are presented. The algorithm is compact and has been programmed for execution on a desk top computer. Two examples are presented to illustrate the method and its application.

Endoscopic measurements using a panoramic annular lens

NASA Technical Reports Server (NTRS)

Gilbert, John A.; Matthys, Donald R.

1992-01-01

The objective of this project was to design, build, demonstrate, and deliver a prototype system for making measurements within cavities. The system was to utilize structured lighting as the means for making measurements and was to rely on a stationary probe, equipped with a unique panoramic annular lens, to capture a cylindrical view of the illuminated cavity. Panoramic images, acquired with a digitizing camera and stored in a desk top computer, were to be linearized and analyzed by mouse-driven interactive software.

On the Use of Computers for Teaching Fluid Mechanics

NASA Technical Reports Server (NTRS)

Benson, Thomas J.

1994-01-01

Several approaches for improving the teaching of basic fluid mechanics using computers are presented. There are two objectives to these approaches: to increase the involvement of the student in the learning process and to present information to the student in a variety of forms. Items discussed include: the preparation of educational videos using the results of computational fluid dynamics (CFD) calculations, the analysis of CFD flow solutions using workstation based post-processing graphics packages, and the development of workstation or personal computer based simulators which behave like desk top wind tunnels. Examples of these approaches are presented along with observations from working with undergraduate co-ops. Possible problems in the implementation of these approaches as well as solutions to these problems are also discussed.

The impact of computer display height and desk design on 3D posture during information technology work by young adults.

PubMed

Straker, L; Burgess-Limerick, R; Pollock, C; Murray, K; Netto, K; Coleman, J; Skoss, R

2008-04-01

Computer display height and desk design to allow forearm support are two critical design features of workstations for information technology tasks. However there is currently no 3D description of head and neck posture with different computer display heights and no direct comparison to paper based information technology tasks. There is also inconsistent evidence on the effect of forearm support on posture and no evidence on whether these features interact. This study compared the 3D head, neck and upper limb postures of 18 male and 18 female young adults whilst working with different display and desk design conditions. There was no substantial interaction between display height and desk design. Lower display heights increased head and neck flexion with more spinal asymmetry when working with paper. The curved desk, designed to provide forearm support, increased scapula elevation/protraction and shoulder flexion/abduction.

Notebook computer use on a desk, lap and lap support: effects on posture, performance and comfort.

PubMed

Asundi, Krishna; Odell, Dan; Luce, Adam; Dennerlein, Jack T

2010-01-01

This study quantified postures of users working on a notebook computer situated in their lap and tested the effect of using a device designed to increase the height of the notebook when placed on the lap. A motion analysis system measured head, neck and upper extremity postures of 15 adults as they worked on a notebook computer placed on a desk (DESK), the lap (LAP) and a commercially available lapdesk (LAPDESK). Compared with the DESK, the LAP increased downwards head tilt 6 degrees and wrist extension 8 degrees . Shoulder flexion and ulnar deviation decreased 13 degrees and 9 degrees , respectively. Compared with the LAP, the LAPDESK decreased downwards head tilt 4 degrees , neck flexion 2 degrees , and wrist extension 9 degrees. Users reported less discomfort and difficulty in the DESK configuration. Use of the lapdesk improved postures compared with the lap; however, all configurations resulted in high values of wrist extension, wrist deviation and downwards head tilt. STATEMENT OF RELEVANCE: This study quantifies postures of users working with a notebook computer in typical portable configurations. A better understanding of the postures assumed during notebook computer use can improve usage guidelines to reduce the risk of musculoskeletal injuries.

Computerized system for the follow-up of patients with heart valve replacements.

PubMed

Bain, W H; Fyfe, I C; Rodger, R A

1985-04-01

A system is described which will accept, store, retrieve and analyze information on large numbers of patients who undergo valve replacement surgery. The purpose of the database is to yield readily available facts concerning the patient's clinical course, prosthetic valve function, length of survival, and incidence of complications. The system uses the Apple Macintosh computer, which is one of the current examples of small, desk-top microprocessors. The software for the input, editing and analysis programs has been written by a professional software writer in close collaboration with a cardiac surgeon. Its content is based on 8 years' experience of computer-based valve follow-up. The system is inexpensive and has proved easy to use in practice.

Project Energise: Using participatory approaches and real time computer prompts to reduce occupational sitting and increase work time physical activity in office workers.

PubMed

Gilson, Nicholas D; Ng, Norman; Pavey, Toby G; Ryde, Gemma C; Straker, Leon; Brown, Wendy J

2016-11-01

This efficacy study assessed the added impact real time computer prompts had on a participatory approach to reduce occupational sedentary exposure and increase physical activity. Quasi-experimental. 57 Australian office workers (mean [SD]; age=47 [11] years; BMI=28 [5]kg/m 2 ; 46 men) generated a menu of 20 occupational 'sit less and move more' strategies through participatory workshops, and were then tasked with implementing strategies for five months (July-November 2014). During implementation, a sub-sample of workers (n=24) used a chair sensor/software package (Sitting Pad) that gave real time prompts to interrupt desk sitting. Baseline and intervention sedentary behaviour and physical activity (GENEActiv accelerometer; mean work time percentages), and minutes spent sitting at desks (Sitting Pad; mean total time and longest bout) were compared between non-prompt and prompt workers using a two-way ANOVA. Workers spent close to three quarters of their work time sedentary, mostly sitting at desks (mean [SD]; total desk sitting time=371 [71]min/day; longest bout spent desk sitting=104 [43]min/day). Intervention effects were four times greater in workers who used real time computer prompts (8% decrease in work time sedentary behaviour and increase in light intensity physical activity; p<0.01). Respective mean differences between baseline and intervention total time spent sitting at desks, and the longest bout spent desk sitting, were 23 and 32min/day lower in prompt than in non-prompt workers (p<0.01). In this sample of office workers, real time computer prompts facilitated the impact of a participatory approach on reductions in occupational sedentary exposure, and increases in physical activity. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Information Commons to Go

ERIC Educational Resources Information Center

Bayer, Marc Dewey

2008-01-01

Since 2004, Buffalo State College's E. H. Butler Library has used the Information Commons (IC) model to assist its 8,500 students with library research and computer applications. Campus Technology Services (CTS) plays a very active role in its IC, with a centrally located Computer Help Desk and a newly created Application Support Desk right in the…

A root-mean-square approach for predicting fatigue crack growth under random loading

NASA Technical Reports Server (NTRS)

Hudson, C. M.

1981-01-01

A method for predicting fatigue crack growth under random loading which employs the concept of Barsom (1976) is presented. In accordance with this method, the loading history for each specimen is analyzed to determine the root-mean-square maximum and minimum stresses, and the predictions are made by assuming the tests have been conducted under constant-amplitude loading at the root-mean-square maximum and minimum levels. The procedure requires a simple computer program and a desk-top computer. For the eleven predictions made, the ratios of the predicted lives to the test lives ranged from 2.13 to 0.82, which is a good result, considering that the normal scatter in the fatigue-crack-growth rates may range from a factor of two to four under identical loading conditions.

Automation of electromagnetic compatability (EMC) test facilities

NASA Technical Reports Server (NTRS)

Harrison, C. A.

1986-01-01

Efforts to automate electromagnetic compatibility (EMC) test facilities at Marshall Space Flight Center are discussed. The present facility is used to accomplish a battery of nine standard tests (with limited variations) deigned to certify EMC of Shuttle payload equipment. Prior to this project, some EMC tests were partially automated, but others were performed manually. Software was developed to integrate all testing by means of a desk-top computer-controller. Near real-time data reduction and onboard graphics capabilities permit immediate assessment of test results. Provisions for disk storage of test data permit computer production of the test engineer's certification report. Software flexibility permits variation in the tests procedure, the ability to examine more closely those frequency bands which indicate compatibility problems, and the capability to incorporate additional test procedures.

Fatigue life estimation program for Part 23 airplanes, `AFS.FOR`

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaul, S.K.

1993-12-31

The purpose of this paper is to introduce to the general aviation industry a computer program which estimates the safe fatigue life of any Federal Aviation Regulation (FAR) Part 23 airplane. The algorithm uses the methodology (Miner`s Linear Cumulative Damage Theory) and the various data presented in the Federal Aviation Administration (FAA) Report No. AFS-120-73-2, dated May 1973. The program is written in FORTRAN 77 language and is executable on a desk top personal computer. The program prompts the user for the input data needed and provides a variety of options for its intended use. The program is envisaged tomore » be released through issuance of a FAA report, which will contain the appropriate comments, instructions, warnings and limitations.« less

GIS modeling of archaeological site locations: A low-tech approach

NASA Technical Reports Server (NTRS)

Futato, Eugene M.

1991-01-01

A Geographic Information System (GIS)-type analysis of archaeological site locations using a dBase III plus program and a desk top computer is presented. A previously developed model of site locations in the Sequatchie Valley of northeastern Alabama is tested against known site locations in another large survey area there. The model fails to account for site locations in the test area. A model is developed for the test area and indicates the site locations are indeed different. Whether this is due to differences in site locations on a sub-regional level, or to sample error in the original model is unknown.

Present status and future of the sophisticated work station

NASA Astrophysics Data System (ADS)

Ishida, Haruhisa

The excellency of the work station is explained, by comparing the functions of software and hardware of work station with those of personal computer. As one of the examples utilizing the functions of work station, desk top publishing is explained. By describing the competition between the Group of ATT · Sun Microsystems which intends to have the leadership by integrating Berkeley version which is most popular at this moment and System V version, and the group led by IBM, future of UNIX as OS of work station is predicted. Development of RISC processor, TRON Plan and Sigma Projects by MITI are also mentioned as its background.

1989 IEEE Aerospace Applications Conference, Breckenridge, CO, Feb. 12-17, 1989, Conference Digest

NASA Astrophysics Data System (ADS)

Recent advances in electronic devices for aerospace applications are discussed in reviews and reports. Topics addressed include large-aperture mm-wave antennas, a cross-array radiometer for spacecraft applications, a technique for computing the propagation characteristics of optical fibers, an analog light-wave system for improving microwave-telemetry data communication, and a ground demonstration of an orbital-debris radar. Consideration is given to a verifiable autonomous satellite control system, Inmarsat second-generation satellites for mobile communication, automated tools for data-base design and criteria for their selection, and a desk-top simulation work station based on the DSP96002 microprocessor chip.

Interactive computer graphics applications for compressible aerodynamics

NASA Technical Reports Server (NTRS)

Benson, Thomas J.

1994-01-01

Three computer applications have been developed to solve inviscid compressible fluids problems using interactive computer graphics. The first application is a compressible flow calculator which solves for isentropic flow, normal shocks, and oblique shocks or centered expansions produced by two dimensional ramps. The second application couples the solutions generated by the first application to a more graphical presentation of the results to produce a desk top simulator of three compressible flow problems: 1) flow past a single compression ramp; 2) flow past two ramps in series; and 3) flow past two opposed ramps. The third application extends the results of the second to produce a design tool which solves for the flow through supersonic external or mixed compression inlets. The applications were originally developed to run on SGI or IBM workstations running GL graphics. They are currently being extended to solve additional types of flow problems and modified to operate on any X-based workstation.

User's guide for the thermal analyst's help desk expert system

NASA Technical Reports Server (NTRS)

Ormsby, Rachel A.

1994-01-01

A guide for users of the Thermal Analyst's Help Desk is provided. Help Desk is an expert system that runs on a DOS based personal computer and operates within the EXSYS expert system shell. Help Desk is an analysis tool designed to provide users having various degrees of experience with the capability to determine first approximations of thermal capacity for spacecraft and instruments. The five analyses supported in Help Desk are: surface area required for a radiating surface, equilibrium temperature of a surface, enclosure temperature and heat loads for a defined position in orbit, enclosure temperature and heat loads over a complete orbit, and selection of appropriate surface properties. The two geometries supported by Help Desk are a single flat plate and a rectangular box enclosure.

A systematic review of standing and treadmill desks in the workplace.

PubMed

MacEwen, Brittany T; MacDonald, Dany J; Burr, Jamie F

2015-01-01

Standing and treadmill desks are intended to reduce the amount of time spent sitting in today's otherwise sedentary office. Proponents of these desks suggest that health benefits may be acquired as standing desk use discourages long periods of sitting, which has been identified as an independent health risk factor. Our objectives were thus to analyze the evidence for standing and treadmill desk use in relation to physiological (chronic disease prevention and management) and psychological (worker productivity, well-being) outcomes. A computer-assisted systematic search of Medline, PubMed, PsycINFO, SPORTDiscus, CINAHL, CENTRAL, and EMBASE databases was employed to identify all relevant articles related to standing and treadmill desk use. Treadmill desks led to the greatest improvement in physiological outcomes including postprandial glucose, HDL cholesterol, and anthropometrics, while standing desk use was associated with few physiological changes. Standing and treadmill desks both showed mixed results for improving psychological well-being with little impact on work performance. Standing and treadmill desks show some utility for breaking up sitting time and potentially improving select components of health. At present; however, there exist substantial evidence gaps to comprehensively evaluate the utility of each type of desk to enhance health benefits by reducing sedentary time. Copyright © 2014 Elsevier Inc. All rights reserved.

Space shuttle atmospheric revitalization subsystem/active thermal control subsystem computer program (users manual)

NASA Technical Reports Server (NTRS)

1973-01-01

A shuttle (ARS) atmosphere revitalization subsystem active thermal control subsystem (ATCS) performance routine was developed. This computer program is adapted from the Shuttle EC/LSS Design Computer Program. The program was upgraded in three noteworthy areas: (1) The functional ARS/ATCS schematic has been revised to accurately synthesize the shuttle baseline system definition. (2) The program logic has been improved to provide a more accurate prediction of the integrated ARS/ATCS system performance. Additionally, the logic has been expanded to model all components and thermal loads in the ARS/ATCS system. (3) The program is designed to be used on the NASA JSC crew system division's programmable calculator system. As written the new computer routine has an average running time of five minutes. The use of desk top type calculation equipment, and the rapid response of the program provides the NASA with an analytical tool for trade studies to refine the system definition, and for test support of the RSECS or integrated Shuttle ARS/ATCS test programs.

Bench-Top Antigen Detection Technique that Utilizes Nanofiltration and Fluorescent Dyes which Emit and Absorb Light in the Near Infrared

NASA Technical Reports Server (NTRS)

Varaljay-Spence, Vanessa A.; Scardelletti, Maximilian C.

2007-01-01

This article discusses the development of a bench-top technique to detect antigens in fluids. The technique involves the use of near infrared NIR fluorescent dyes conjugated to antibodies, centrifugation, nanofilters, and spectrometry. The system used to detect the antigens utilizes a spectrometer, fiber optic cables, NIR laser, and laptop computer thus making it portable and ideally suited for desk top analysis. Using IgM as an antigen and the secondary antibody, anti-IgM conjugated to the near infrared dye, IRDye (trademark) 800, for detection, we show that nanofiltration can efficiently and specifically separate antibody-antigen complexes in solution and that the complexes can be detected by a spectrometer and software using NIR laser excitation at 778 nm and NIR dye offset emission at 804 nm. The peak power detected at 778 nm for the excitation emission and at 804 nm for the offset emission is 879 pW (-60.06 dBm) and 35.7 pW (-74.5 dBm), respectively.

77 FR 6093 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... Public: Businesses or other for-profit and not-for- profit institutions. Frequency: On occasion. OMB Desk... sent to Ms. Toppings at WHS/ESD/Information Management Division, 4800 Mark Center Drive, 2nd Floor...

Transportation energy data book

DOT National Transportation Integrated Search

2000-11-01

This book is a statistical compendium prepared and published by Oak Ridge National Laboratory under contract with the Office of Transportation Technologies in the Department of Energy. Designed for use as a desk-top reference, the data book represent...

LANDSAT technology transfer to the private and public sectors through community colleges and other locally available institutions

NASA Technical Reports Server (NTRS)

Rogers, R. H. (Principal Investigator)

1980-01-01

Major first year accomplishments are summarized and plans are provided for the next 12-month period for a program established by NASA with the Environmental Research Institute of Michigan to investigate methods of making LANDSAT technology readily available to a broader set of private sector firms through local community colleges. The program applies a network where the major participants are NASA, university or research institutes, community colleges, and obtain hands-on training in LANDSAT data analysis techniques, using a desk-top, interactive remote analysis station which communicates with a central computing facility via telephone line, and provides for generation of land cover maps and data products via remote command.

Rotating Desk for Collaboration by Two Computer Programmers

NASA Technical Reports Server (NTRS)

Riley, John Thomas

2005-01-01

A special-purpose desk has been designed to facilitate collaboration by two computer programmers sharing one desktop computer or computer terminal. The impetus for the design is a trend toward what is known in the software industry as extreme programming an approach intended to ensure high quality without sacrificing the quantity of computer code produced. Programmers working in pairs is a major feature of extreme programming. The present desk design minimizes the stress of the collaborative work environment. It supports both quality and work flow by making it unnecessary for programmers to get in each other s way. The desk (see figure) includes a rotating platform that supports a computer video monitor, keyboard, and mouse. The desk enables one programmer to work on the keyboard for any amount of time and then the other programmer to take over without breaking the train of thought. The rotating platform is supported by a turntable bearing that, in turn, is supported by a weighted base. The platform contains weights to improve its balance. The base includes a stand for a computer, and is shaped and dimensioned to provide adequate foot clearance for both users. The platform includes an adjustable stand for the monitor, a surface for the keyboard and mouse, and spaces for work papers, drinks, and snacks. The heights of the monitor, keyboard, and mouse are set to minimize stress. The platform can be rotated through an angle of 40 to give either user a straight-on view of the monitor and full access to the keyboard and mouse. Magnetic latches keep the platform preferentially at either of the two extremes of rotation. To switch between users, one simply grabs the edge of the platform and pulls it around. The magnetic latch is easily released, allowing the platform to rotate freely to the position of the other user

Training Needs Analysis and Evaluation for New Technologies through the Use of Problem-Based Inquiry

ERIC Educational Resources Information Center

Casey, Matthew Scott; Doverspike, Dennis

2005-01-01

The analysis of calls to a help desk, in this case calls to a computer help desk, can serve as a rich source of information on the real world problems that individuals are having with the implementation of a new technology. Thus, we propose that an analysis of help desk calls, a form of problem-based inquiry, can serve as a fast and low cost means…

Electric Power Research Institute | Energy Systems Integration Facility |

Science.gov Websites

-10 megawatts of aggregated generation capacity. A photo of four men looking at something one man is pointing to on a desk while another man sits at the desk typing on a computer. EPRI and Schneider Electric

Microtomographic imaging in the process of bone modeling and simulation

NASA Astrophysics Data System (ADS)

Mueller, Ralph

1999-09-01

Micro-computed tomography ((mu) CT) is an emerging technique to nondestructively image and quantify trabecular bone in three dimensions. Where the early implementations of (mu) CT focused more on technical aspects of the systems and required equipment not normally available to the general public, a more recent development emphasized practical aspects of micro- tomographic imaging. That system is based on a compact fan- beam type of tomograph, also referred to as desktop (mu) CT. Desk-top (mu) CT has been used extensively for the investigation of osteoporosis related health problems gaining new insight into the organization of trabecular bone and the influence of osteoporotic bone loss on bone architecture and the competence of bone. Osteoporosis is a condition characterized by excessive bone loss and deterioration in bone architecture. The reduced quality of bone increases the risk of fracture. Current imaging technologies do not allow accurate in vivo measurements of bone structure over several decades or the investigation of the local remodeling stimuli at the tissue level. Therefore, computer simulations and new experimental modeling procedures are necessary for determining the long-term effects of age, menopause, and osteoporosis on bone. Microstructural bone models allow us to study not only the effects of osteoporosis on the skeleton but also to assess and monitor the effectiveness of new treatment regimens. The basis for such approaches are realistic models of bone and a sound understanding of the underlying biological and mechanical processes in bone physiology. In this article, strategies for new approaches to bone modeling and simulation in the study and treatment of osteoporosis and age-related bone loss are presented. The focus is on the bioengineering and imaging aspects of osteoporosis research. With the introduction of desk-top (mu) CT, a new generation of imaging instruments has entered the arena allowing easy and relatively inexpensive access to the three-dimensional microstructure of bone, thereby giving bone researchers a powerful tool for the exploration of age-related bone loss and osteoporosis.

Microcomputers in Libraries: The Quiet Revolution.

ERIC Educational Resources Information Center

Boss, Richard

1985-01-01

This article defines three separate categories of microcomputers--personal, desk-top, multi-user devices--and relates storage capabilities (expandability, floppy disks) to library applications. Highlghts include de facto standards, operating systems, database management systems, applications software, circulation control systems, dumb and…

Ergonomically Correct Classrooms: Consider Students' Developmental Needs When Furnishing Your Schools.

ERIC Educational Resources Information Center

Bushweller, Kevin

1998-01-01

Explores the ergonomic needs of students within the classroom and the mistakes schools commonly make regarding classroom furniture. Several considerations are discussed for improving desk and chair design, particularly involving computer desks, and the proper use and placement of lighting. (GR)

Two BASIC computer programs for the determination of in situ stresses using the CSIRO hollow inclusion stress cell and the USBM borehole deformation gage

USGS Publications Warehouse

Smith, W.K.

1982-01-01

The mathematical method of determining in-situ stresses by overcoring, using either the U.S. Bureau of Mines Borehole Deformation Gage or the Commonwealth Scientific and Industrial Research Organisation Hollow Inclusion Stress Cell, is summarized, and data reduction programs for each type of instrument, written in BASIC, are presented. The BASIC programs offer several advantages over previously available FORTRAN programs. They can be executed on a desk-top microcomputer at or near the field site, allowing the investigator to assess the quality of the data and make decisions on the need for additional testing while the crew is still in the field. Also, data input is much simpler than with currently available FORTRAN programs; either English or SI units can be used; and standard deviations of the principal stresses are computed as well as those of the geographic components.

A laser-based ice shape profilometer for use in icing wind tunnels

NASA Technical Reports Server (NTRS)

Hovenac, Edward A.; Vargas, Mario

1995-01-01

A laser-based profilometer was developed to measure the thickness and shape of ice accretions on the leading edge of airfoils and other models in icing wind tunnels. The instrument is a hand held device that is connected to a desk top computer with a 10 meter cable. It projects a laser line onto an ice shape and used solid state cameras to detect the light scattered by the ice. The instrument corrects the image for camera angle distortions, displays an outline of the ice shape on the computer screen, saves the data on a disk, and can print a full scale drawing of the ice shape. The profilometer has undergone extensive testing in the laboratory and in the NASA Lewis Icing Research Tunnel. Results of the tests show very good agreement between profilometer measurements and known simulated ice shapes and fair agreement between profilometer measurements and hand tracing techniques.

BLISS: a computer program for the protection of blood donors. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Catsimpoolas, N.; Cooke, C.; Valeri, C.R.

1982-06-28

A BASIC program has been developed for the Hewlett-Packard Model 9845 desk-top computer which allows the creation of blood donor files for subsequent retrieval, update, and correction. A similar modified version was developed for hte HP 9835 Model. This software system has been called BLISS which stands for Blood Information and Security System. In addition to its function as a file management system, BLISS provides warnings before a donation is performed to protect the donor from excessive exposure to radioactivity and DMSO levels, from too frequent of donations of blood, and from adverse reactions. The program can also be usedmore » to select donors who have participated in specific studies and to list the experimental details which have been stored in the file. The BLISS system has been actively utilized at the Naval Blood Research Laboratory in Boston and contains the files of over 750 donors.« less

Los Alamos radiation transport code system on desktop computing platforms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briesmeister, J.F.; Brinkley, F.W.; Clark, B.A.

The Los Alamos Radiation Transport Code System (LARTCS) consists of state-of-the-art Monte Carlo and discrete ordinates transport codes and data libraries. These codes were originally developed many years ago and have undergone continual improvement. With a large initial effort and continued vigilance, the codes are easily portable from one type of hardware to another. The performance of scientific work-stations (SWS) has evolved to the point that such platforms can be used routinely to perform sophisticated radiation transport calculations. As the personal computer (PC) performance approaches that of the SWS, the hardware options for desk-top radiation transport calculations expands considerably. Themore » current status of the radiation transport codes within the LARTCS is described: MCNP, SABRINA, LAHET, ONEDANT, TWODANT, TWOHEX, and ONELD. Specifically, the authors discuss hardware systems on which the codes run and present code performance comparisons for various machines.« less

Analysis of reference transactions using packaged computer programs.

PubMed

Calabretta, N; Ross, R

1984-01-01

Motivated by a continuing education class attended by the authors on the measurement of reference desk activities, the reference department at Scott Memorial Library initiated a project to gather data on reference desk transactions and to analyze the data by using packaged computer programs. The programs utilized for the project were SPSS (Statistical Package for the Social Sciences) and SAS (Statistical Analysis System). The planning, implementation and development of the project are described.

The Remote Analysis Station (RAS) as an instructional system

NASA Technical Reports Server (NTRS)

Rogers, R. H.; Wilson, C. L.; Dye, R. H.; Jaworski, E.

1981-01-01

"Hands-on" training in LANDSAT data analysis techniques can be obtained using a desk-top, interactive remote analysis station (RAS) which consists of a color CRT imagery display, with alphanumeric overwrite and keyboard, as well as a cursor controller and modem. This portable station can communicate via modem and dial-up telephone with a host computer at 1200 baud or it can be hardwired to a host computer at 9600 baud. A Z80 microcomputer controls the display refresh memory and remote station processing. LANDSAT data is displayed as three-band false-color imagery, one-band color-sliced imagery, or color-coded processed imagery. Although the display memory routinely operates at 256 x 256 picture elements, a display resolution of 128 x 128 can be selected to fill the display faster. In the false color mode the computer packs the data into one 8-bit character. When the host is not sending pictorial information the characters sent are in ordinary ASCII code. System capabilities are described.

The Three-Continent, 24-Hour Help Desk: An Academic First?

ERIC Educational Resources Information Center

Sykes, Jean

2002-01-01

Describes Follow the Sun, a computer help-desk service that takes advantage of time differences around the world to permit four universities (University of Colorado Boulder, Australia's Macquarie and Newcastle universities, and the London School of Economics) to share services and provide 24-hour support to users. (EV)

Implementing a Help Desk at a Small Liberal Arts College.

ERIC Educational Resources Information Center

Actis, Bev

1993-01-01

Planning for a computer use "help desk" at Kenyon College (Ohio) was constrained by very limited resources. However, careful and thorough planning resulted in a low-budget, homegrown, but highly effective facility. Staffing, training, staff communication, and marketing the service were essential elements in its success. (MSE)

76 FR 71581 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-18

...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF....S. Coast Guard, Assistant Commandant for Command, Control, Communications, Computers and Information...

77 FR 65897 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains... Commandant for Command, Control, Communications, Computers and Information Technology. [FR Doc. 2012-26718...

75 FR 19414 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Fax. (a) To DMF, 202... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this... Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and Information...

76 FR 66737 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains... Commandant for Command, Control, Communications, Computers and Information Technology. [FR Doc. 2011-27755...

Time Out for Time Management.

ERIC Educational Resources Information Center

Herr, Judy; And Others

1995-01-01

Offers early childhood program administrators time management strategies to increase available time, efficiency, and effectiveness. To manage paper, directors should clear the desk top, use in-out baskets, create a filing system, and handle mail effectively. Tips for managing meetings include preparing an agenda, scheduling meetings for…

Nanoimaging using soft X-ray and EUV laser-plasma sources

NASA Astrophysics Data System (ADS)

Wachulak, Przemyslaw; Torrisi, Alfio; Ayele, Mesfin; Bartnik, Andrzej; Czwartos, Joanna; Węgrzyński, Łukasz; Fok, Tomasz; Fiedorowicz, Henryk

2018-01-01

In this work we present three experimental, compact desk-top imaging systems: SXR and EUV full field microscopes and the SXR contact microscope. The systems are based on laser-plasma EUV and SXR sources based on a double stream gas puff target. The EUV and SXR full field microscopes, operating at 13.8 nm and 2.88 nm wavelengths are capable of imaging nanostructures with a sub-50 nm spatial resolution and short (seconds) exposure times. The SXR contact microscope operates in the "water-window" spectral range and produces an imprint of the internal structure of the imaged sample in a thin layer of SXR sensitive photoresist. Applications of such desk-top EUV and SXR microscopes, mostly for biological samples (CT26 fibroblast cells and Keratinocytes) are also presented. Details about the sources, the microscopes as well as the imaging results for various objects will be presented and discussed. The development of such compact imaging systems may be important to the new research related to biological, material science and nanotechnology applications.

76 FR 799 - Publication of Year 2010 Form M-1 With Electronic Filing Option, Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

...-EBSA (3272). Questions on completing the form are being directed to the EBSA help desk at (202) 693-8360. For questions regarding the electronic filing capability, contact the EBSA computer help desk at... working together with administrators to help them comply with this filing requirement. Copies of the Form...

77 FR 22582 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

..., attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above, between 9 a.m. and 5 p... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public... Commandant for Command, Control, Communications, Computers and Information Technology. [FR Doc. 2012-9008...

75 FR 39552 - Collection of Information Under Review by Office of Management and Budget; OMB Control Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

...) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public..., U.S. Coast Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and...

75 FR 31459 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-03

...) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public..., U.S. Coast Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and...

76 FR 78287 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF... Command, Control, Communications, Computers and Information Technology. [FR Doc. 2011-32233 Filed 12-15-11...

75 FR 80514 - Collection of Information Under Review by Office of Management and Budget: OMB Control Numbers...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

...- 366-9329. (b) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer for the... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains... Commandant for Command, Control, Communications, Computers and Information Technology. [FR Doc. 2010-32060...

75 FR 62407 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Fax. (a) To DMF, 202... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this... Commandant for Command, Control, Communications, Computers and Information Technology. [FR Doc. 2010-25382...

The 2009 DOD Cost Research Workshop: Acquisition Reform

DTIC Science & Technology

2010-02-01

2 ACEIT Enhancement, Help-Desk/Training, Consulting DASA-CE–3 Command, Control, Communications, Computers, Intelligence, Surveillance, and...Management Information System (OSMIS) online interactive relational database DASA-CE–2 Title: ACEIT Enhancement, Help-Desk/Training, Consulting Summary...support and training for the Automated Cost estimator Integrated Tools ( ACEIT ) software suite. ACEIT is the Army standard suite of analytical tools for

Task Performance and Meta-Cognitive Outcomes When Using Activity Workstations and Traditional Desks

PubMed Central

Pilcher, June J.; Baker, Victoria C.

2016-01-01

The purpose of the current study is to compare the effects of light physical activity to sedentary behavior on cognitive task performance and meta-cognitive responses. Thirty-eight undergraduate students participated in the study. The participants used a stationary bicycle with a desk top and a traditional desk while completing two complex cognitive tasks and measures of affect, motivation, morale, and engagement. The participants pedaled the stationary bicycle at a slow pace (similar in exertion to a normal walking pace) while working. The results indicated that cognitive task performance did not change between the two workstations. However, positive affect, motivation, and morale improved when using the stationary bicycle. These results suggest that activity workstations could be implemented in the work place and in educational settings to help decrease sedentary behavior without negatively affecting performance. Furthermore, individuals could experience a positive emotional response when working on activity workstations which in turn could help encourage individuals to choose to be more physical active during daily activities. PMID:27445921

Young Adult Reference Services in the Public Library.

ERIC Educational Resources Information Center

Boylan, Patricia

1984-01-01

Methods suggested for use by public libraries to stay on top of school assignments include a large, loose-leaf type binder entitled "School Assignments" to be kept at reference desk; assignment-related book lists; school assignment forms; and teacher notification forms to alert them if the library cannot fulfill their information…

Hierarchical nonlinear behavior of hot composite structures

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Chamis, C. C.; Singhal, S. N.

1993-01-01

Hierarchical computational procedures are described to simulate the multiple scale thermal/mechanical behavior of high temperature metal matrix composites (HT-MMC) in the following three broad areas: (1) behavior of HT-MMC's from micromechanics to laminate via METCAN (Metal Matrix Composite Analyzer), (2) tailoring of HT-MMC behavior for optimum specific performance via MMLT (Metal Matrix Laminate Tailoring), and (3) HT-MMC structural response for hot structural components via HITCAN (High Temperature Composite Analyzer). Representative results from each area are presented to illustrate the effectiveness of computational simulation procedures and accompanying computer codes. The sample case results show that METCAN can be used to simulate material behavior such as the entire creep span; MMLT can be used to concurrently tailor the fabrication process and the interphase layer for optimum performance such as minimum residual stresses; and HITCAN can be used to predict the structural behavior such as the deformed shape due to component fabrication. These codes constitute virtual portable desk-top test laboratories for characterizing HT-MMC laminates, tailoring the fabrication process, and qualifying structural components made from them.

Coupled bending-torsion steady-state response of pretwisted, nonuniform rotating beams using a transfer-matrix method

NASA Technical Reports Server (NTRS)

Gray, Carl E., Jr.

1988-01-01

Using the Newtonian method, the equations of motion are developed for the coupled bending-torsion steady-state response of beams rotating at constant angular velocity in a fixed plane. The resulting equations are valid to first order strain-displacement relationships for a long beam with all other nonlinear terms retained. In addition, the equations are valid for beams with the mass centroidal axis offset (eccentric) from the elastic axis, nonuniform mass and section properties, and variable twist. The solution of these coupled, nonlinear, nonhomogeneous, differential equations is obtained by modifying a Hunter linear second-order transfer-matrix solution procedure to solve the nonlinear differential equations and programming the solution for a desk-top personal computer. The modified transfer-matrix method was verified by comparing the solution for a rotating beam with a geometric, nonlinear, finite-element computer code solution; and for a simple rotating beam problem, the modified method demonstrated a significant advantage over the finite-element solution in accuracy, ease of solution, and actual computer processing time required to effect a solution.

David Price--Pioneer of digital ICP monitoring, neurosurgeon and teacher.

PubMed

Czosnyka, Marek; Kirollos, Ramez; van Hille, Philip

2015-06-01

In early 1970s first personal desk-top computers started to be available in hospitals. Mr Price was one of the pioneers introducing his own software to identify Marmarou's model of CSF space during infusion studies to diagnose patients suffering from hydrocephalus. His closed-loop control system for infusion of mannitol to manage patients at risk of intracranial hypertension was designed in 1977. The system worked successfully for 10 years in Pinderfields Hospital in Wakefield, UK. In the middle 1980's he initiated international cooperation with Children's Health Centre in Poland in long-term computer-assisted monitoring and analysis of ICP. Software designed in a course of this cooperation paved the way for contemporary package of ICM+ (Intensive Care Monitor, University of Cambridge, UK). Our scientific portfolio from these years (1985-1995) contains hundreds of head injured patients with waveform ICP analysis, introduction of compensatory reserve index RAP, few highly cited papers. Now, we understand ICP much better thanks to David's personal passion and extremely friendly support.

Computer-assisted photogrammetric mapping systems for geologic studies-A progress report

USGS Publications Warehouse

Pillmore, C.L.; Dueholm, K.S.; Jepsen, H.S.; Schuch, C.H.

1981-01-01

Photogrammetry has played an important role in geologic mapping for many years; however, only recently have attempts been made to automate mapping functions for geology. Computer-assisted photogrammetric mapping systems for geologic studies have been developed and are currently in use in offices of the Geological Survey of Greenland at Copenhagen, Denmark, and the U.S. Geological Survey at Denver, Colorado. Though differing somewhat, the systems are similar in that they integrate Kern PG-2 photogrammetric plotting instruments and small desk-top computers that are programmed to perform special geologic functions and operate flat-bed plotters by means of specially designed hardware and software. A z-drive capability, in which stepping motors control the z-motions of the PG-2 plotters, is an integral part of both systems. This feature enables the computer to automatically position the floating mark on computer-calculated, previously defined geologic planes, such as contacts or the base of coal beds, throughout the stereoscopic model in order to improve the mapping capabilities of the instrument and to aid in correlation and tracing of geologic units. The common goal is to enhance the capabilities of the PG-2 plotter and provide a means by which geologists can make conventional geologic maps more efficiently and explore ways to apply computer technology to geologic studies. ?? 1981.

Adult Literacy and Technology Conference Proceedings (University Park, Pennsylvania, June 4-7, 1987).

ERIC Educational Resources Information Center

Meenan, Avis L., Comp.; Burns, Patricia E., Comp.

These proceedings contain the summaries of 60 presentations. Among those included are: "Desk Top Publishing & Experiential Literacy Material" (Arnold); "A Description of the U.S. Experience in Providing Vocational Skills to Individuals with Low Literacy Skills" (Barbee); "Audio-Disk Technology" (Bixler, MacClay); "Technology for Teachers: A Group…

Microfilm Viewer Experiments. Final Report.

ERIC Educational Resources Information Center

Reintjes, J. F.; And Others

Two new designs for microfilm viewers are described. Both viewers are front projection viewers utilizing matte surface display screens. One viewer with an adjustable horizontal screen has a normal magnification rate and is mounted on a desk top. The other viewer has a high (4x) magnification rate in a mini-theater configuration with remote…

Combining Basic Business Math and Electronic Calculators.

ERIC Educational Resources Information Center

Merchant, Ronald

As a means of alleviating math anxiety among business students and of improving their business machine skills, Spokane Falls Community College offers a course in which basic business math skills are mastered through the use of desk top calculators. The self-paced course, which accommodates varying student skill levels, requires students to: (1)…

B-School vs. C-School

ERIC Educational Resources Information Center

Weinstein, Margery

2012-01-01

When an employer sees on a resume that an applicant graduated at the top of his or her business school class, does that necessarily translate into guaranteed success behind the desk at the company? A business school background can't hurt, but most organizations know it is far from enough. With more individuals touting business school degrees on…

What Is a Gas? A Find-Out Book: Demonstrations, Experiments, Ideas.

ERIC Educational Resources Information Center

Weaver, Elbert C.

Twelve desk-top experiments and demonstrations which illustrate properties of and facts about gas are presented. Each experiment includes: purpose, materials needed, instructions, and a list of facts and properties that have been observed. Several of the activities also include questions for students and items for discussion. The topics of the…

Fluctuation analysis of relativistic nucleus-nucleus collisions in emulsion chambers

NASA Technical Reports Server (NTRS)

Mcguire, Stephen C.

1988-01-01

An analytical technique was developed for identifying enhanced fluctuations in the angular distributions of secondary particles produced from relativistic nucleus-nucleus collisions. The method is applied under the assumption that the masses of the produced particles are small compared to their linear momenta. The importance of particles rests in the fact that enhanced fluctuations in the rapidity distributions is considered to be an experimental signal for the creation of the quark-gluon-plasma (QGP), a state of nuclear matter predicted from the quantum chromodynamics theory (QCD). In the approach, Monte Carlo simulations are employed that make use of a portable random member generator that allow the calculations to be performed on a desk-top computer. The method is illustrated with data taken from high altitude emulsion exposures and is immediately applicable to similar data from accelerator-based emulsion exposures.

17. DETAIL INTERIOR VIEW OF CONTROL ROOM ON LEVEL +77 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. DETAIL INTERIOR VIEW OF CONTROL ROOM ON LEVEL +77 OF POWERHOUSE #1; NOTEBOOKS IN FOREGROUND ARE ON TOP OF THE NEW SWITCH GEAR CONTROL CONSOLE; THE ORIGINAL OPERATOR DESK IS IN CENTER; THE ORIGINAL BENCH BOARD CONTROLS ARE IN BACKGROUND. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

The Secret to the "Best" Ratings from Any Evaluation Scale

ERIC Educational Resources Information Center

Berk, Ronald A.

2010-01-01

Most faculty developers have a wide variety of rating scales that fly across their desk tops as their incremental program activities unfold during the academic year. The primary issue for this column is: What is the quality of those ratings used for decisions about people and programs? When students, faculty, and administrators rate a program or…

LANDSAT technology transfer to the private and public sectors through community colleges and other locally available institutions, phase 2 program

NASA Technical Reports Server (NTRS)

Rogers, R. H. (Principal Investigator)

1982-01-01

A program established by NASA with the Environmental Research Institute of Michigan (ERIM) applies a network where the major participants are NASA, universities or research institutes, community colleges, and local private and public organizations. Local users are given an opportunity to obtain "hands on" training in LANDSAT data analysis and Geographic Information System (GIS) techniques using a desk top, interactive remote analysis station (RAS). The RAS communicates with a central computing facility via telephone line, and provides for generation of land use and land suitability maps and other data products via remote command. During the period from 22 September 1980 - 6 March 1982, 15 workshops and other training activities were successfully conducted throughout Michigan providing hands on training on the RAS terminals for 250 or more people and user awareness activities such as exhibits and demonstrations for 2,000 or more participants.

Standardization in software conversion of (ROM) estimating

NASA Technical Reports Server (NTRS)

Roat, G. H.

1984-01-01

Technical problems and their solutions comprise by far the majority of work involved in space simulation engineering. Fixed price contracts with schedule award fees are becoming more and more prevalent. Accurate estimation of these jobs is critical to maintain costs within limits and to predict realistic contract schedule dates. Computerized estimating may hold the answer to these new problems, though up to now computerized estimating has been complex, expensive, and geared to the business world, not to technical people. The objective of this effort was to provide a simple program on a desk top computer capable of providing a Rough Order of Magnitude (ROM) estimate in a short time. This program is not intended to provide a highly detailed breakdown of costs to a customer, but to provide a number which can be used as a rough estimate on short notice. With more debugging and fine tuning, a more detailed estimate can be made.

17. Interior view of courtroom looking towards judge's bench; showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Interior view of courtroom looking towards judge's bench; showing built in linear seating on both ends of room, clerical desk and equipment, through wall air conditioning units, exterior windows and door; north end of west wing on top floor; view to northwest. - Ellsworth Air Force Base, Group Administration & Secure Storage Building, 2372 Westover Avenue, Blackhawk, Meade County, SD

Implementation of School Uniform Policy and the Violation of Students' Human Rights in Schools

ERIC Educational Resources Information Center

Mahlangu, Vimbi Petrus

2017-01-01

The paper highlights the violations of students' human rights in schools. The problem is the incident that took place at a school in Pretoria in 2016 where Black girls protested against the School's Code of Conduct relating to hairstyle. Qualitative approach was used to collect information through a literature review and desk-top research methods.…

An Exploration into the Use of Manipulatives to Develop Abstract Reasoning in an Introductory Science Course

ERIC Educational Resources Information Center

Fencl, Heidi; Butler, Angie Huenink

2007-01-01

Classical physics has a long history of using demonstrations and experiments to develop ideas in introductory courses. The purpose of this exploration is to examine the effectiveness of a desk-top activity for helping students develop abstract reasoning. In the pilot exploration, students in three laboratory sections of a single physics course…

Buying and Using Tomorrow's Computers in Today's Tertiary Institutions.

ERIC Educational Resources Information Center

Sungalia, Helen

1980-01-01

Higher-education administrators are alerted to the advent of the microprocessor and the capabilities of desk computers. The potential use of the microcomputer in administrative decision making, efficiency, and resource allocation are reviewed briefly. (MSE)

Soft x-ray imaging with incoherent sources

NASA Astrophysics Data System (ADS)

Wachulak, P.; Torrisi, A.; Ayele, M.; Bartnik, A.; Czwartos, J.; Wegrzyński, Ł.; Fok, T.; Parkman, T.; Vondrová, Š.; Turnová, J.; Odstrcil, M.; Fiedorowicz, H.

2017-05-01

In this work we present experimental, compact desk-top SXR microscope, the EUV microscope which is at this stage a technology demonstrator, and finally, the SXR contact microscope. The systems are based on laser-plasma EUV and SXR sources, employing a double stream gas puff target. The EUV and SXR full field microscopes, operating at 13.8 nm and 2.88 nm wavelengths, respectively, are capable of imaging nanostructures with a sub-50 nm spatial resolution with relatively short (seconds) exposure times. The SXR contact microscope operates in the "water-window" spectral range, to produce an imprint of the internal structure of the sample in a thin layer of SXR light sensitive photoresist. Applications of such desk-top EUV and SXR microscopes for studies of variety of different samples - test objects for resolution assessment and other objects such as carbon membranes, DNA plasmid samples, organic and inorganic thin layers, diatoms, algae and carcinoma cells, are also presented. Details about the sources, the microscopes as well as the imaging results for various objects will be presented and discussed. The development of such compact imaging systems may be important to the new research related to biological, material science and nanotechnology applications.

The Computational Science Education Reference Desk: A tool for increasing inquiry based learning in the science classroom

NASA Astrophysics Data System (ADS)

Joiner, D. A.; Stevenson, D. E.; Panoff, R. M.

2000-12-01

The Computational Science Reference Desk is an online tool designed to provide educators in math, physics, astronomy, biology, chemistry, and engineering with information on how to use computational science to enhance inquiry based learning in the undergraduate and pre college classroom. The Reference Desk features a showcase of original content exploration activities, including lesson plans and background materials; a catalog of websites which contain models, lesson plans, software, and instructional resources; and a forum to allow educators to communicate their ideas. Many of the recent advances in astronomy rely on the use of computer simulation, and tools are being developed by CSERD to allow students to experiment with some of the models that have guided scientific discovery. One of these models allows students to study how scientists use spectral information to determine the makeup of the interstellar medium by modeling the interstellar extinction curve using spherical grains of silicate, amorphous carbon, or graphite. Students can directly compare their model to the average interstellar extinction curve, and experiment with how small changes in their model alter the shape of the interstellar extinction curve. A simpler model allows students to visualize spatial relationships between the Earth, Moon, and Sun to understand the cause of the phases of the moon. A report on the usefulness of these models in two classes, the Computational Astrophysics workshop at The Shodor Education Foundation and the Conceptual Astronomy class at the University of North Carolina at Greensboro, will be presented.

Computer program for the calculation of grain size statistics by the method of moments

USGS Publications Warehouse

Sawyer, Michael B.

1977-01-01

A computer program is presented for a Hewlett-Packard Model 9830A desk-top calculator (1) which calculates statistics using weight or point count data from a grain-size analysis. The program uses the method of moments in contrast to the more commonly used but less inclusive graphic method of Folk and Ward (1957). The merits of the program are: (1) it is rapid; (2) it can accept data in either grouped or ungrouped format; (3) it allows direct comparison with grain-size data in the literature that have been calculated by the method of moments; (4) it utilizes all of the original data rather than percentiles from the cumulative curve as in the approximation technique used by the graphic method; (5) it is written in the computer language BASIC, which is easily modified and adapted to a wide variety of computers; and (6) when used in the HP-9830A, it does not require punching of data cards. The method of moments should be used only if the entire sample has been measured and the worker defines the measured grain-size range. (1) Use of brand names in this paper does not imply endorsement of these products by the U.S. Geological Survey.

Aviation Proof of Concept: The Transition of Marine Corps Aviation Maintenance Computer Assets and Systems into the Navy Marine Corps Intranet

DTIC Science & Technology

2010-03-01

Blackberry Services Increment 1 SLAPC: 103.8 SERVICE NAME: HELP DESK SLA: 104 Performance Category: Average Speed of Answer - Telephone Calls...Category: Blackberry Services Increment 1 SLAPC: 103.8 SERVICE NAME: HELP DESK SLA: 104 Performance Category: Average Speed of Answer - Telephone...legacy VPNs for existing tunnels , until MCNOSC agrees to shut down of legacy B-1’s. o Shut down of legacy B-1’s will transfer VPN’s tunnels to

Computer Graphics Special Issue on 1992 Symposium on Interactive 3D graphics Held in Cambridge, Massachusetts on 29 March-1 April 1992

DTIC Science & Technology

1992-01-01

it * five representations of a desk: 1) a highly detailed desk with ,m ~ ~ ~ ~ Dlla L.._ ’ ,,,e ".. l, faces subdivided along gradients of radiosity , 2...created by our implementation, including timings and polygon using radiosity approaches [9, 61, by summing the counts. contributions of an approximating...and Winget, J. Improving Radiosity Solutions Through the Use of Analytically Determined Form-Factors. Proc. SIGGRAPH 󈨝 Plate 4, illuminated by both

Illinois Occupational Skill Standards: Information Technology Operate Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Operate Cluster (help desk support, computer maintenance and technical support technician, systems operator, application and computer support specialist, systems administrator, network administrator, and database administrator). The skill…

Brave New (Interactive) Worlds: A Review of the Design Affordances and Constraints of Two 3D Virtual Worlds as Interactive Learning Environments

ERIC Educational Resources Information Center

Dickey, Michele D.

2005-01-01

Three-dimensional virtual worlds are an emerging medium currently being used in both traditional classrooms and for distance education. Three-dimensional (3D) virtual worlds are a combination of desk-top interactive Virtual Reality within a chat environment. This analysis provides an overview of Active Worlds Educational Universe and Adobe…

Electromagnetic Induction: A Computer-Assisted Experiment

ERIC Educational Resources Information Center

Fredrickson, J. E.; Moreland, L.

1972-01-01

By using minimal equipment it is possible to demonstrate Faraday's Law. An electronic desk calculator enables sophomore students to solve a difficult mathematical expression for the induced EMF. Polaroid pictures of the plot of induced EMF, together with the computer facility, enables students to make comparisons. (PS)

Implementation and adherence issues in a workplace treadmill desk intervention.

PubMed

Tudor-Locke, Catrine; Hendrick, Chelsea A; Duet, Megan T; Swift, Damon L; Schuna, John M; Martin, Corby K; Johnson, William D; Church, Timothy S

2014-10-01

We report experiences, observations, and general lessons learned, specifically with regards to participant recruitment and adherence, while implementing a 6-month randomized controlled treadmill desk intervention (the WorkStation Pilot Study) in a real-world office-based health insurance workplace. Despite support from the company's upper administration, relatively few employees responded to the company-generated e-mail to participate in the study. Ultimately only 41 overweight/obese participants were deemed eligible and enrolled from a recruitment pool of 728 workers. Participants allocated to the Treadmill Desk Group found the treadmill desk difficult to use for 45 min twice a day as scheduled. Overall attendance averaged 45%-50% of all possible scheduled sessions. The most frequently reported reasons for missing sessions included work conflict (35%), out of office (30%), and illness/injury/drop-out (20%). Although focus groups indicated consistently positive comments about treadmill desks, an apparent challenge was fitting a rigid schedule of shared use to an equally rigid and demanding work schedule punctuated with numerous tasks and obligations that could not easily be interrupted. Regardless, we documented that sedentary office workers average ∼43 min of light-intensity (∼2 METs) treadmill walking daily in response to a scheduled, facilitated, and shared access workplace intervention. Workstation alternatives that combine computer-based work with light-intensity physical activity are a potential solution to health problems associated with excessive sedentary behavior; however, there are numerous administrative, capital, and human resource challenges confronting employers considering providing treadmill desks to workers in a cost-effective and equitable manner.

Ergonomics and the standing desk.

PubMed

Mula, Allison

2018-05-28

There has been a recent trend in the integration of sit-stand option desks in the work place. Fear-based advertising insinuating that sitting is the health equivalent of smoking has pervaded many work environments. As workers want to remain healthy and pain free, and employers want and need a healthy workforce, it appears that there is a pervasive trend of avoiding sitting as often as possible. Because work tasks that call for an extensive amount of sitting are often times computer-based, this 'standing is healthy' fad is most notably presenting itself at computer-based work stations. The understandably perceived simple fix to the dilemma of sitting, has been the introduction of the sit-stand desk. However, before we all throw out our chairs, it is important to discuss the past and recent research that indicates that prolonged standing can also have detrimental effects on the human system. It is crucial that we expand our idea of a healthy work environment to one that facilitates movement and change in position and empowers the worker to understand their role in their own musculoskeletal and physiological health and wellness, beyond the use of equipment. If we can replace the phrase, 'sitting is the new smoking' with the phrase, 'sedentary is the new smoking', then we can elucidate the idea of what a healthy computer-based work environment and routine would be.

A program for calculation of intrapulmonary shunts, blood-gas and acid-base values with a programmable calculator.

PubMed

Ruiz, B C; Tucker, W K; Kirby, R R

1975-01-01

With a desk-top, programmable calculator, it is now possible to do complex, previously time-consuming computations in the blood-gas laboratory. The authors have developed a program with the necessary algorithms for temperature correction of blood gases and calculation of acid-base variables and intrapulmonary shunt. It was necessary to develop formulas for the Po2 temperature-correction coefficient, the oxyhemoglobin-dissociation curve for adults (withe necessary adjustments for fetal blood), and changes in water vapor pressure due to variation in body temperature. Using this program in conjuction with a Monroe 1860-21 statistical programmable calculator, it is possible to temperature-correct pH,Pco2, and Po2. The machine will compute alveolar-arterial oxygen tension gradient, oxygen saturation (So2), oxygen content (Co2), actual HCO minus 3 and a modified base excess. If arterial blood and mixed venous blood are obtained, the calculator will print out intrapulmonary shunt data (Qs/Qt) and arteriovenous oxygen differences (a minus vDo2). There also is a formula to compute P50 if pH,Pco2,Po2, and measured So2 from two samples of tonometered blood (one above 50 per cent and one below 50 per cent saturation) are put into the calculator.

Accessorizing the Classroom.

ERIC Educational Resources Information Center

Kennedy, Mike

2002-01-01

Describes how, as is the case with the desks they purchase, schools should choose other furnishings such as computer workstations by balancing aesthetics, architects' recommendations, staff preferences, durability, flexibility, and cost. (EV)

Adjusting to Technology

ERIC Educational Resources Information Center

Kennedy, Mike

2007-01-01

With classroom Internet access nearly universal in public schools and computers ubiquitous on every school and university campus, classroom furnishings have evolved to accommodate the machines so students can take full advantage of the technology. The desks, tables and other furniture that a school chooses for its computers will depend on the…

More Ergo, Less Aargh!

ERIC Educational Resources Information Center

Roy, Ken

2005-01-01

Unless the teacher is working at an ergonomically designed workstation, using a computer can result in eyestrain, neck aches, backaches, and headaches. Unfortunately, most teachers do their keyboarding at desks, on lab tables, and in other spaces that were not designed with computer use in mind. Ergonomics is the science of adapting workstations,…

Computer Workstations: Desks

MedlinePlus

... Website You are exiting the Department of Labor's Web server. The Department of Labor does not endorse, ... the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the ...

Low frequency driven electromagnetic energy harvester for self-powered system

NASA Astrophysics Data System (ADS)

Lee, Byung-Chul; Ataur Rahman, Md; Hyun, Seung-Ho; Chung, Gwiy-Sang

2012-12-01

This paper describes a low frequency driven electromagnetic energy harvester (EMEH) for a self-powered system. The EMEH consists of two thin flame resistant (FR-4) springs, NdFeB permanent magnets, and a copper coil. The FR-4 spring was fabricated by a desk computer numerical control (CNC) 3D modeling machine. The two FR-4 springs were used at the top and bottom sides of the device to reduce the stress on the springs and to achieve linear movement of the moving magnet. The finite element method (FEM) is used to investigate the mechanical properties of the system. The proposed EMEH can generate up to 1.52 mW at a resonance frequency of 16 Hz with an acceleration of 0.2 g (g = 9.8 m s-2) and a superior normalized power density (NPD) of 1.07 mW cm-3 g2. The EMEH attached to the engine of an automobile produced 2.4 mW of power, showing the viability of practical applications.

Application of a computerized vibroacoustic data bank for random vibration criteria development

NASA Technical Reports Server (NTRS)

Ferebee, R. C.

1982-01-01

A computerized data bank system was developed for utilization of large amounts of vibration and acoustic data to formulate component random vibration design and test criteria. This system consists of a computer, graphics tablets, and a dry silver hard copier which are all desk top type hardware and occupy minimal space. Currently, the data bank contains data from the Saturn 5 and Titan 3 flight and static test programs. The vibration and acoustic data are stored in the form of power spectral density and one third octave band plots over the frequency range from 20 to 2000 Hz. The data were stored by digitizing each spectral plot by tracing with the graphics tablet. The digitized data were statistically analyzed, and the resulting 97.5 percent confidence levels were stored on tape along with the appropriate structural parameters. Standard extrapolation procedures were programmed for prediction of component random vibration test criteria for new launch vehicle and payload configurations. A user's manual is included to guide potential users through the programs.

Isoelectric focusing in space

NASA Technical Reports Server (NTRS)

Bier, M.; Egen, N. B.; Mosher, R. A.; Twitty, G. E.

1982-01-01

The potential of space electrophoresis is conditioned by the fact that all electrophoretic techniques require the suppression of gravity-caused convection. Isoelectric focusing (IEF) is a powerful variant of electrophoresis, in which amphoteric substances are separated in a pH gradient according to their isoelectric points. A new apparatus for large scale IEF, utilizing a recycling principle, has been developed. In the ground-based prototype, laminar flow is provided by a series of parallel filter elements. The operation of the apparatus is monitored by an automated array of pH and ultraviolet absorption sensors under control of a desk-top computer. The apparatus has proven to be useful for the purification of a variety of enzymes, snake venom proteins, peptide hormones, and other biologicals, including interferon produced by genetic engineering techniques. In planning for a possible space apparatus, a crucial question regarding electroosmosis needs to be addressed To solve this problem, simple focusing test modules are planned for inclusion in an early Shuttle flight.

A visual study of computers on doctors' desks.

PubMed

Pearce, Christopher; Walker, Hannah; O'Shea, Carolyn

2008-01-01

General practice has rapidly computerised over the past ten years, thereby changing the nature of general practice rooms. Most general practice consulting rooms were designed and created in an era without computer hardware, establishing a pattern of work around maximising the doctor-patient relationship. General practitioners (GPs) and patients have had to integrate the computer into this environment. Twenty GPs allowed access to their rooms and consultations as part of a larger study. The results are based on an analysis of still shots of the consulting rooms. Analysis used dramaturgical methodology; thus the room is described as though it is the setting for a play. First, several desk areas were identified: a shared or patient area, a working area, a clinical area and an administrative area. Then, within that framework, we were able to identify two broad categories of setting, one inclusive of the patient and one exclusive. With the increasing significance of the computer in the three-way doctor-patient-computer relationship, an understanding of the social milieu in which the three players in the consultation interact (the staging) will inform further analysis of the interaction, and allow a framework for assessing the effects of different computer placements.

Experiments with microcomputer-based artificial intelligence environments

USGS Publications Warehouse

Summers, E.G.; MacDonald, R.A.

1988-01-01

The U.S. Geological Survey (USGS) has been experimenting with the use of relatively inexpensive microcomputers as artificial intelligence (AI) development environments. Several AI languages are available that perform fairly well on desk-top personal computers, as are low-to-medium cost expert system packages. Although performance of these systems is respectable, their speed and capacity limitations are questionable for serious earth science applications foreseen by the USGS. The most capable artificial intelligence applications currently are concentrated on what is known as the "artificial intelligence computer," and include Xerox D-series, Tektronix 4400 series, Symbolics 3600, VAX, LMI, and Texas Instruments Explorer. The artificial intelligence computer runs expert system shells and Lisp, Prolog, and Smalltalk programming languages. However, these AI environments are expensive. Recently, inexpensive 32-bit hardware has become available for the IBM/AT microcomputer. USGS has acquired and recently completed Beta-testing of the Gold Hill Systems 80386 Hummingboard, which runs Common Lisp on an IBM/AT microcomputer. Hummingboard appears to have the potential to overcome many of the speed/capacity limitations observed with AI-applications on standard personal computers. USGS is a Beta-test site for the Gold Hill Systems GoldWorks expert system. GoldWorks combines some high-end expert system shell capabilities in a medium-cost package. This shell is developed in Common Lisp, runs on the 80386 Hummingboard, and provides some expert system features formerly available only on AI-computers including frame and rule-based reasoning, on-line tutorial, multiple inheritance, and object-programming. ?? 1988 International Association for Mathematical Geology.

Chem Ed Compacts

ERIC Educational Resources Information Center

Wolf, Walter A., Ed.

1976-01-01

Presents three activities: (1) the investigation of the purity and stability of nicotinamide and flavin coenzymes; (2) desk-computer fitting of a two-exponential function; and (3) an interesting and inexpensive solubility product experiment for introductory chemistry. (RH)

NORDA’s Pattern Analysis Laboratory: Current Contributions to Naval Mapping, Charting, and Geodesy

DTIC Science & Technology

1989-04-01

magnetic observatories (McLeod, 1988). Using system integrates a suite of sensors and control devices the PAL’s VAX 11/780, spherical harmonic models to...DJAO:[FPS]*.OLB 5. Miscellaneous Utilities CALENDAR (NORDA events) 780 $ CALENDAR (menu-driven) DIALER modem controller 780 $ R AUTO DIAL:DIALER DTC...Utilities CALENDAR (NORDA events) 780 CALENDAR (menu-driven) DIALER modem controller 780 $ R AUTO DIAL:DIALER DTC Desk Top Calendar 780 $ DTC (menu-driven

An automated program for reinforcement requirements for openings in cylindrical pressure vessels

NASA Technical Reports Server (NTRS)

Wilson, J. F.; Taylor, J. T.

1975-01-01

An automated interactive program for calculating the reinforcement requirements for openings in cylindrical pressure vessels subjected to internal pressure is described. The program is written for an electronic desk top calculator. The program calculates the required area of reinforcement for a given opening and compares this value with the area of reinforcement provided by a proposed design. All program steps, operating instructions, and example problems with input and sample output are documented.

Deploying TSP on a National Scale: An Experience Report from Pilot Projects in Mexico

DTIC Science & Technology

2009-03-01

the culture of Western businesses. To address this, the Ministry of Economy, in coordination with business organizations, education- al institutions...commercial desk- top client -server applications. The TSP builds on and enables the Personal Software Process. The PSP guides individual soft- ware developers...they do their day-to-day work. Al - though a great deal of data is available to manage the project and to manage individual perfor- mance, engineers

The relationship between sitting posture and seated-related upper quadrant musculoskeletal pain in computing South African adolescents: A prospective study.

PubMed

Brink, Yolandi; Louw, Quinette; Grimmer, Karen; Jordaan, Esmè

2015-12-01

There is evidence that consistent sitting for prolonged periods is associated with upper quadrant musculoskeletal pain (UQMP). It is unclear whether postural alignment is a significant risk factor. The aim of the prospective study (2010-2011) was to ascertain if three-dimensional sitting postural angles, measured in a real-life school computer classroom setting, predict seated-related UQMP. Asymptomatic Grade 10 high-school students, aged 15-17 years, undertaking Computer Application Technology, were eligible to participate. Using the 3D Posture Analysis Tool, sitting posture was measured while students used desk-top computers. Posture was reported as five upper quadrant angles (Head flexion, Neck flexion; Craniocervical angle, Trunk flexion and Head lateral bending). The Computer Usage Questionnaire measured seated-related UQMP and hours of computer use. The Beck Depression Inventory and the Multidimensional Anxiety Scale for Children assessed psychosocial factors. Sitting posture, computer use and psychosocial factors were measured at baseline. UQMP was measured at six months and one-year follow-up. 211, 190 and 153 students participated at baseline, six months and one-year follow-up respectively. 34.2% students complained of seated-related UQMP during the follow-up period. Increased head flexion (HF) predicted seated-related UQMP developing over time for a small group of students with pain scores greater than the 90th pain percentile, adjusted for age, gender, BMI, computer use and psychosocial factors (p = 0.003). The pain score increased 0.22 points per 1° increase in HF. Classroom ergonomics and postural hygiene should therefore focus on reducing large HF angles among computing adolescents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Microbolometer SU-8 photoresist microstructure with cytochrome c protein as a sensing pixel for microbolometer

NASA Astrophysics Data System (ADS)

Lai, Jian-Lun; Su, Guo-Dung J.

2012-08-01

There are two important parts in Microbolometer: the high TCR sensing material and low thermal conductance. The high TCR material cytochrome c protein is a good candidate for infrared detection. Our group already demonstrated cytochrome c thin film has high TCR on the top of SU8 surface that has been published in Proc. of SPIE (2011). Because the very low thermal conductivity of SU-8, we proposed a new concept of SU-8 photoresist thermal insulation desk structure, and used the exposure dose method to establish it. Although exposure dose method is very sensitive to exposure time and PEB time, we successfully investigated the right recipe to create new desk insulation structure which with different height. We also explored the relationship between mask II exposure time and desktop thickness, and how the post-exposure baking (PEB) time influenced our structure. Our SU-8 photoresist insulation structure fabrication process is much easier and cheaper than present SiNx fabrication process. The desk shape structure can have low thermal conductance of 6.681*10-6 W/K. The easy-made SU-8 microstructures and cytochrome c thin films that and can reduce the cost of IR microbolometer. We believe that it is possible to fabricate a new generation of microbolometer based on cytochrome c protein and SU-8 photoresist microstructures.

PDAs in Teacher Education: A Case Study Examining Mobile Technology Integration

ERIC Educational Resources Information Center

Franklin, Teresa; Sexton, Colleen; Lu, Young; Ma, Hongyan

2007-01-01

The classroom computer is no longer confined to a box on the desk. Mobile handheld computing devices have evolved into powerful and affordable learning tools. Handheld technologies are changing the way people access and work with information. The use of Personal Digital Assistants (PDAs or handhelds) has been an evolving part of the business world…

Proceedings of the Annual Symposium on Frequency Control (41st) Held in Philadelphia, Pennsylvania on 27-29 May 1987

DTIC Science & Technology

1987-05-29

Controler A Fig.1 Experimental setip, P.S.O, : Phase sen:sitive detector. 0 VC.X.O. : Voltage controlled crystal oscillator. 1 A : Post - detector amplifier...the sampling period samples were obtained using a pair of fre- used in the experimental verification. :uency counters controlled by a desk-top...reduce the effect of group delay changes. The first method can te implemented by actively -_ - - . - or passively controlling the environment around

Electricity unplugged

NASA Astrophysics Data System (ADS)

Karalis, Aristeidis

2009-02-01

The judge was driving back late one cold winter night. Entering the garage, the battery-charging indicator in his wirelessly powered electric car came on. "Home at last," crossed his mind. He swiped his personal smartcard on the front-door detector to be let in. He heard a "charging" beep from his mobile phone. The blinking cursor on the half-finished e-mail on the laptop had been waiting all day on the side table. He picked the computer up and walked towards his desk. "Good evening, your honour. Your wirelessly heated robe," said the butler-robot as it approached from the kitchen. Putting on the electric garment, he sat on the medical desk chair. His artificial heart was now beating faster.

Measures of fit and discomfort for elementary school children in Serbia.

PubMed

Feathers, David; Pavlovic-Veselinovic, Sonja; Hedge, Alan

2013-01-01

Assessing physical ergonomic factors within the classroom environment creates new opportunities to support designs that promote student well-being. Student-aged anthropometric data helps guide proper desk fit assessment, therefore facilitating scholastic performance through the reduction of distractions such as physical discomfort. This study reports dimensions of fit between student anthropometry and the desk environment (classroom seating conditions), for grade-school aged children in Serbia. Measurements of the children and their desks are compared to subjective reports of discomfort. Fifty-seven elementary school students, grade 2 (ages 7-8; n=29) and grade 4 (ages 9-10; n=28), were enrolled in this study. All participants were from the same elementary school in the city of Nis, Serbia. Seventeen anthropometric measurements of students were collected using standard anthropometric instruments. Eight measurements of student work desks and chairs were also collected. Students were evaluated by a physiatrist to assess health issues and completed a novel questionnaire about musculoskeletal discomfort for different body parts. Student fit to the classroom seat and desk was assessed structurally and subjectively. Data analysis included descriptive anthropometric measurements and inferential statistics including Chi square analysis. Results indicated age-related differences in body part discomfort for grade 2 and grade 4 students, arm discomfort reported over 50% of second grade students, and neck/upper back discomfort was reported as the highest of all body parts (32%) for students in the fourth grade. Anthropometric variables and preliminary analysis of fit as it relates to reported discomfort are discussed, as are external factors of backpack use and seated video/computer-game use. International comparisons of anthropometric data are discussed and serve to inform new considerations of ergonomics research for school children.

Are Computer Keyboards Making You--or Your Students--Sick?

ERIC Educational Resources Information Center

Goldsborough, Reid

2008-01-01

According to new research by the London-based consumer group Which? (www.which.co.uk), a computer's keyboard may be harboring the kinds of bugs that can cause a nasty case of food poisoning. "The main cause of a bug-infested keyboard is eating at one's desk," according to a report released by the group. Crumbs and spills can wind up on and between…

Signal Sensing and Transduction by Histidine Kinases as Unveiled through Studies on a Temperature Sensor.

PubMed

Abriata, Luciano A; Albanesi, Daniela; Dal Peraro, Matteo; de Mendoza, Diego

2017-06-20

Histidine kinases (HK) are the sensory proteins of two-component systems, responsible for a large fraction of bacterial responses to stimuli and environmental changes. Prototypical HKs are membrane-bound proteins that phosphorylate cognate response regulator proteins in the cytoplasm upon signal detection in the membrane or periplasm. HKs stand as potential drug targets but also constitute fascinating systems for studying proteins at work, specifically regarding the chemistry and mechanics of signal detection, transduction through the membrane, and regulation of catalytic outputs. In this Account, we focus on Bacillus subtilis DesK, a membrane-bound HK part of a two-component system that maintains appropriate membrane fluidity at low growth temperatures. Unlike most HKs, DesK has no extracytoplasmic signal-sensing domains; instead, sensing is carried out by 10 transmembrane helices (coming from two protomers) arranged in an unknown structure. The fifth transmembrane helix from each protomer connects, without any of the intermediate domains found in other HKs, into the dimerization and histidine phosphotransfer (DHp) domain located in the cytoplasm, which is followed by the ATP-binding domains (ABD). Throughout the years, genetic, biochemical, structural, and computational studies on wild-type, mutant, and truncated versions of DesK allowed us to dissect several aspects of DesK's functioning, pushing forward a more general understanding of its own structure/function relationships as well as those of other HKs. We have shown that the sensing mechanism is rooted in temperature-dependent membrane properties, most likely a combination of thickness, fluidity, and water permeability, and we have proposed possible mechanisms by which DesK senses these properties and transduces the signals. X-ray structures and computational models have revealed structural features of TM and cytoplasmic regions in DesK's kinase- and phosphatase-competent states. Biochemical and genetic experiments and molecular simulations further showed that reversible formation of a two-helix coiled coil in the fifth TM segment and the N-terminus of the cytoplasmic domain is essential for the sensing and signal transduction mechanisms. Together with other structural and functional works, the emerging picture suggests that diverse HKs possess distinct sensing and transduction mechanisms but share as rather general features (i) a symmetric phosphatase state and an asymmetric kinase state and (ii) similar functional outputs on the conserved DHp and ABD domains, achieved through different mechanisms that depend on the nature of the initial signal. We here advance (iii) an important role for TM prolines in transducing the initial signals to the cytoplasmic coiled coils, based on simulations of DesK's TM helices and our previous work on a related HK, PhoQ. Lastly, evidence for DesK, PhoQ, BvgS, and DctB HKs shows that (iv) overall catalytic output is tuned by a delicate balance between hydration potentials, coiled coil stability, and exposure of hydrophobic surface patches at their cytoplasmic coiled coils and at the N-terminal and C-terminal sides of their TM helices. This balance is so delicate that small perturbations, either physiological signals or induced by mutations, lead to large remodeling of the underlying conformational landscape achieving clear-cut changes in catalytic output, mirroring the required response speed of these systems for proper biological function.

Proceedings of the Nautical Almanac Office Sesquicentennial Symposium Held in Washington, The District of Columbia on March 3-4, 1999

DTIC Science & Technology

1999-03-01

Laboratory. While I was at USNO I was allocated a roll-top desk (previously used by H. R. Morgan) in the Library, and so I did not interact with the NAO...Tables de la lune construites d’apr~s le principe newtonien de la gravitation universelle would not be published until 1857. They were, on the other...the methodical calculations for the astronomical tables, Newcomb had much free time in his daily schedule of work. He allocated some of the hours to

Going for green

NASA Astrophysics Data System (ADS)

Extance, Andy

2010-05-01

Thousands of times per second a point of light turns on and off, moving side to side, top to bottom. It is a rhythm that ticks around the world, illuminating living rooms and office desks in the process. However, the cathode-ray TVs and monitors that metronomically fire electron guns at viewers - who are shielded only by thin sheets of glass - are rapidly being replaced by flat-screen technologies. Yet as the creation of images using scanning electron beams fades into history, a new form of technology is emerging that builds up pictures by scanning with light.

An Intelligent Case-Based Help Desk Providing Web-Based Support for EOSDIS Customers

NASA Technical Reports Server (NTRS)

Mitchell, Christine M.; Thurman, David A.

1998-01-01

This paper describes a project that extends the concept of help desk automation by offering World Wide Web access to a case-based help desk. It explores the use of case-based reasoning and cognitive engineering models to create an 'intelligent' help desk system, one that learns. It discusses the AutoHelp architecture for such a help desk and summarizes the technologies used to create a help desk for NASA data users.

Teaching Abnormal Psychology in a Multimedia Classroom.

ERIC Educational Resources Information Center

Brewster, JoAnne

1996-01-01

Examines the techniques used in teaching an abnormal psychology class in a multimedia environment with two computers and a variety of audiovisual equipment. Students respond anonymously to various questions via keypads mounted on their desks, then immediately view and discuss summaries of their responses. (MJP)

A portable data-logging system for industrial hygiene personal chlorine monitoring.

PubMed

Langhorst, M L; Illes, S P

1986-02-01

The combination of suitable portable sensors or instruments with small microprocessor-based data-logger units has made it possible to obtain detailed monitoring data for many health and environmental applications. Following data acquisition in field use, the logged data may be transferred to a desk-top personal computer for complete flexibility in manipulation of data and formating of results. A system has been assembled from commercial components and demonstrated for chlorine personal monitoring applications. The system consists of personal chlorine sensors, a Metrosonics data-logger and reader unit, and an Apple II Plus personal computer. The computer software was developed to handle sensor calibration, data evaluation and reduction, report formating and long-term storage of raw data on a disk. This system makes it possible to generate time-concentration profiles, evaluate dose above a threshold, quantitate short-term excursions and summarize time-weighted average (TWA) results. Field data from plant trials demonstrated feasibility of use, ruggedness and reliability. No significant differences were found between the time-weighted average chlorine concentrations determined by the sensor/logger system and two other methods: the sulfamic acid bubbler reference method and the 3M Poroplastic diffusional dosimeter. The sensor/data-logger system, however, provided far more information than the other two methods in terms of peak excursions, TWAs and exposure doses. For industrial hygiene applications, the system allows better definition of employee exposures, particularly for chemicals with acute as well as chronic health effects.(ABSTRACT TRUNCATED AT 250 WORDS)

Ubiquitous computing to support co-located clinical teams: using the semiotics of physical objects in system design.

PubMed

Bang, Magnus; Timpka, Toomas

2007-06-01

Co-located teams often use material objects to communicate messages in collaboration. Modern desktop computing systems with abstract graphical user interface (GUIs) fail to support this material dimension of inter-personal communication. The aim of this study is to investigate how tangible user interfaces can be used in computer systems to better support collaborative routines among co-located clinical teams. The semiotics of physical objects used in team collaboration was analyzed from data collected during 1 month of observations at an emergency room. The resulting set of communication patterns was used as a framework when designing an experimental system. Following the principles of augmented reality, physical objects were mapped into a physical user interface with the goal of maintaining the symbolic value of those objects. NOSTOS is an experimental ubiquitous computing environment that takes advantage of interaction devices integrated into the traditional clinical environment, including digital pens, walk-up displays, and a digital desk. The design uses familiar workplace tools to function as user interfaces to the computer in order to exploit established cognitive and collaborative routines. Paper-based tangible user interfaces and digital desks are promising technologies for co-located clinical teams. A key issue that needs to be solved before employing such solutions in practice is associated with limited feedback from the passive paper interfaces.

Reference Desk Is Not Dead Yet: A Perspective from the National Medical Library of Cuba

ERIC Educational Resources Information Center

Arroyo, Sonia Santana

2015-01-01

There persists an intense debate on whether or not the traditional reference desk should be in academic libraries. Yet, despite many anti-desk studies, the place of the reference desk still remains. This paper aims to review the current significance of the reference desk for some libraries, as well as the importance of choosing the proper…

Are we chained to our desks? Describing desk-based sitting using a novel measure of occupational sitting.

PubMed

Ryde, Gemma Cathrine; Brown, Helen Elizabeth; Gilson, Nicholas David; Brown, Wendy J

2014-09-01

Prolonged occupational sitting is related to poor health outcomes. Detailed data on sitting time at desks are required to understand and effectively influence occupational sitting habits. Full-time office employees were recruited (n = 105; mean age 40.9 ± 11.5 years; BMI 26.1 ± 3.9, 65% women). Sitting at the desk and in other work contexts was measured using a sitting pad and ActivPAL for an entire working week. Employees used a diary to record work hours. Time spent at work, sitting at work and at the desk; number of sit to stand transitions at the desk; and number of bouts of continuous sitting at the desk < 20 and > 60 minutes, were calculated. Average time spent at work was 8.7 ± 0.8 hours/day with 67% spent sitting at the desk (5.8 ± 1.2 hours/day), and 4% in other workplace settings. On average, employees got up from their desks 3 times/hour (29 ± 13/day). Sitting for more than 60 consecutive minutes occurred infrequently (0.69 ± 0.62 times/day), with most sit to stands (80%; 23 ± 14) occurring before 20 minutes of continual sitting. The findings provide highly detailed insights into desk-based sitting habits, highlighting large proportions of time spent sitting at desks, but with frequent interruptions.

Modelling Cognitive Style in a Peer Help Network.

ERIC Educational Resources Information Center

Bull, Susan; McCalla, Gord

2002-01-01

Explains I-Help, a computer-based peer help network where students can ask and answer questions about assignments and courses based on the metaphor of a help desk. Highlights include cognitive style; user modeling in I-Help; matching helpers to helpees; and types of questions. (Contains 64 references.) (LRW)

IM and SMS for the Circulation Desk

ERIC Educational Resources Information Center

Power, June L.

2012-01-01

It's been well documented in a number of articles regarding the contemporary library patron that with the rise in mobile computing and smart phone technology, patrons are looking for fast and easy service from whichever technological avenue they are using to access library services. Libraries are responding with increasing numbers of online…

Library Media Learning and Play Center.

ERIC Educational Resources Information Center

Faber, Therese; And Others

Preschool educators developed a library media learning and play center to enable children to "experience" a library; establish positive attitudes about the library; and encourage respect for self, others, and property. The center had the following areas: check-in and check-out desk, quiet reading section, computer center, listening center, video…

NASA-OAI HPCCP K-12 Program

NASA Technical Reports Server (NTRS)

1994-01-01

The NASA-OAI High Performance Communication and Computing K- 12 School Partnership program has been completed. Cleveland School of the Arts, Empire Computech Center, Grafton Local Schools and the Bug O Nay Ge Shig School have all received network equipment and connections. Each school is working toward integrating computer and communications technology into their classroom curriculum. Cleveland School of the Arts students are creating computer software. Empire Computech Center is a magnet school for technology education at the elementary school level. Grafton Local schools is located in a rural community and is using communications technology to bring to their students some of the same benefits students from suburban and urban areas receive. The Bug O Nay Ge Shig School is located on an Indian Reservation in Cass Lake, MN. The students at this school are using the computer to help them with geological studies. A grant has been issued to the friends of the Nashville Library. Nashville is a small township in Holmes County, Ohio. A community organization has been formed to turn their library into a state of the art Media Center. Their goal is to have a place where rural students can learn about different career options and how to go about pursuing those careers. Taylor High School in Cincinnati, Ohio was added to the schools involved in the Wind Tunnel Project. A mini grant has been awarded to Taylor High School for computer equipment. The computer equipment is utilized in the school's geometry class to computationally design objects which will be tested for their aerodynamic properties in the Barberton Wind Tunnel. The students who create the models can view the test in the wind tunnel via desk top conferencing. Two teachers received stipends for helping with the Regional Summer Computer Workshop. Both teachers were brought in to teach a session within the workshop. They were selected to teach the session based on their expertise in particular software applications.

Cross-sectional Examination of Long-term Access to Sit-Stand Desks in a Professional Office Setting.

PubMed

Carr, Lucas J; Swift, Maggie; Ferrer, Alex; Benzo, Roberto

2016-01-01

Prolonged sedentary behavior is an independent risk factor for many negative health outcomes. Although many employers have begun introducing sit-stand desks as means of reducing employee's occupational sitting time, few studies have examined the impact of prolonged access to such desks on sitting/standing time or cardiometabolic outcomes. The present study compared occupational sedentary/physical activity behaviors and cardiometabolic biomarkers among employees with long-term access to traditional sitting and sit-stand desks. This study used a naturalistic, cross-sectional study design. Occupational sedentary and physical activity behaviors and cardiometabolic health outcomes were collected in a controlled laboratory between February and June 2014. Data were analyzed in September 2014. Adults working in full-time sedentary desk jobs who reported having either a sit-stand desk (n=31) or standard sitting desk (n=38) for a minimum of 6 months were recruited. Employees with sit-stand desks sat less (p=0.02) and stood more at work (p=0.01) compared with employees with sitting desks. Significant inverse correlations were observed between several occupational physical activity outcomes (walking time, steps at work) and cardiometabolic risk factors (systolic blood pressure, weight, lean mass, BMI) over the entire sample. Employees with long-term access to sit-stand desks sat less and stood more compared with employees with sitting desks. These findings hold public health significance, as sit-stand desks represent a potentially sustainable approach for reducing sedentary behavior among the large, growing number of sedentary workers at increased risk for sedentariness-related pathologies. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

76 FR 2144 - Quest Diagnostics, Inc. Information Technology Help Desk Services Including On-Site Leased...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

.... Information Technology Help Desk Services Including On-Site Leased Workers From Modis, West Norriton, PA..., applicable to workers of Quest Diagnostics, Inc., Information Technology Help Desk Services, West Norriton... Quest Diagnostics, Inc., Information Technology Help Desk [[Page 2145

A Psychophysical Protocol to Develop Ergonomic Recommendations for Sitting and Standing Workstations.

PubMed

Lin, Michael Y; Catalano, Paul; Dennerlein, Jack T

2016-06-01

The aim of this study was to determine user self-selected setup for both sitting and standing computer workstations and identify major differences. No current ergonomic setup guideline for standing computer workstations is available. Twenty adult participants completed four 45-min sessions of simulated office computer work with an adjustable sit-stand computer workstation. Placement and relative position of all workstation components, including a cordless mouse, a cordless keyboard, a height-adjustable desk, and a 22-inch monitor mounted on a mechanical-assisted arm were recorded during the four sessions, which alternated between sitting and standing for each session. Participants were interrupted four times within each session, and the workstation was "reset" to extreme locations. Participants were instructed to adjust the location to achieve the most comfortable arrangement and to make as many adjustments during the session to achieve this goal. Overall, users placed the keyboard closer to their body (sternum), set desk height lower than their elbow, and set the monitor lower relative to their eyes with a greater upward tilt while standing compared to sitting. During the 45-min sessions, the number of adjustments participants made became smaller and over the four sessions was consistent, suggesting the psychophysical protocol was effective and consistent. Users preferred different workstation setups for sitting and standing computer workstations. Therefore, future setup guidelines and principles for standing computer workstations may not be simply translated from those for sitting. These results can serve as the first step toward making recommendations to establish ergonomic guidelines for standing computer workstation arrangement. © 2016, Human Factors and Ergonomics Society.

Increasing physician activity with treadmill desks.

PubMed

Thompson, Warren G; Koepp, Gabriel A; Levine, James A

2014-01-01

Prolonged sitting has been shown to increase mortality and obesity. We sought to determine whether physicians would use a treadmill desk, increase their daily physical activity and lose weight. 20 overweight and obese physicians aged 25 to 70 with Body Mass Index > 25. Participants used a treadmill desk, a triaxial accelerometer, and received exercise counseling in a randomized, cross-over trial over 24 weeks. Group 1 received exercise counseling, accelerometer feedback, and a treadmill desk for 12 weeks and then accelerometer only for 12 weeks. Group 2 received an accelerometer without feedback for 12 weeks followed by exercise counseling, accelerometer feedback, and the treadmill desk for 12 weeks. Daily physical activity increased while using the treadmill desk compared to not using the desk by 197 kcal per day (p=0.003). The difference in weight during the two 12 week periods was 1.85 kg (p=0.03). Percent body fat was 1.9% lower while using the treadmill desk (p=0.02). There were no differences in metabolic or well-being measures. This study suggests that physicians will use a treadmill desk, that it does increase their activity, and that it may help with weight loss. Further studies are warranted.

Business diversification - In the businesses of desk calculator, semiconductor and liquid crystal

NASA Astrophysics Data System (ADS)

Asada, Atsushi

This is a record of the lecture at the 27th Annual Meeting on Information Science and Technology. Lecturer, a staff member of Sharp, Corp., explained its business diversification. The Company started with electric appliances. After coping with the application of computer technology, it made a success in the business of desk calculator. Aiming at making calculator for personal use, it coped with the business in semiconductor, and developed its business in liquid crystal for making calculator thinner. Based on these businesses, it expanded its business in OA appliances, and developed the business in combining electric appliances and information including distribution and marketing. The businesses in the age of 1990s will be requested to provide services by customizing hardware, software and system with efforts to enhance valued-added to them.

Old Books Bring New Life to the Brick and Mortar Library

NASA Astrophysics Data System (ADS)

Bosken, S.

2012-08-01

If all the library books and journals can be viewed on your desk top, why come to the physical library? The USNO Library tried to bring the patrons inside the library. One method was to rotate rare book displays each month. As the library holds a fabulous collection of ancient astronomy books, including Copernicus, Kepler, Galileo, and Newton, we have abundant resources. The presentation will highlight the varied displays and offer a Rare Books 101 explanation of paper, printing, binding and a behind-the-scenes look at how old books are maintained and preserved.

Archaeological and Paleontological Investigation at Kalaeloa (Barber’s Point), Honouliuli, ’EWA, O’Ahu Island, Federal Study Areas 1a and 1b, and State of Hawaii Optional Area 1,

DTIC Science & Technology

1981-07-01

gravel, slightly sticky, slightly plastic, massive structure. Granule size limestone decreases with depth. Color whitens with depth influenced by neutral...fish. Vertebrae from shark or ray are present in 2787 and 2745 and fragments of large toothed jaws, tentatively identified as crevally (ulua) are present...a white enameled 5-gallon liquid dispenser sits on top a wooden crate. The barracks is wired for lighting with a drop-cord light over the desks

Changing the way we work: elevating energy expenditure with workstation alternatives.

PubMed

Tudor-Locke, C; Schuna, J M; Frensham, L J; Proenca, M

2014-06-01

Emerging evidence supports the feasibility of raising daily energy expenditure (EE) by replacing office work-related sedentary behavior with low-intensity non-exercise physical activity (PA) via workstation alternatives to the traditional office chair and desktop computer-based combinations. The purpose of this review article is to introduce a simple taxonomy to facilitate classification and study of workstation alternatives, catalog the diversity of research undertaken to date related to energy balance, and present and summarize the gaps and opportunities for a research agenda for workstation alternatives moving forward. A PubMed search elicited 57 English language articles published since 2000; additional articles were identified by reviewing reference sections and contacting authors. Selection criteria ultimately focused on use of workstation alternatives during simulated or real work tasks. The EE of sitting on a stability ball or using sit-stand/standing desks is comparable to the traditional seated condition (≅1.2 kcal min(-1)). The treadmill and pedal desks (active workstation alternatives) offer the greatest promise in terms of EE (≅2-4 kcal min(-1)). Sitting on a stability ball or using sit-stand/standing desks does not impair task performance relative to the traditional seated condition. Some evidence of typing impairment is inconsistently reported with active workstation alternatives; the finer motor skills required for mouse-related tasks may be more affected. Little is known about learning or adaptation with practice. Users are generally accepting of workstation alternatives; however, there is evidence of less than optimal use. Active workstations (that is, treadmill desks and pedal desks) in particular represent a potential strategy for mitigating the diminished EE inherent to contemporary office-based workplaces, but only if they are scalable. The science supporting active workstations is young and heterogeneous; however, this means that there are many knowledge gaps and opportunities for research, including those focused on implementation issues related to optimizing both employers' and workers' uptake.

Changes in posture through the use of simple inclines with notebook computers placed on a standard desk.

PubMed

Asundi, Krishna; Odell, Dan; Luce, Adam; Dennerlein, Jack T

2012-03-01

This study evaluated the use of simple inclines as a portable peripheral for improving head and neck postures during notebook computer use on tables in portable environments such as hotel rooms, cafés, and airport lounges. A 3D motion analysis system measured head, neck and right upper extremity postures of 15 participants as they completed a 10 min computer task in six different configurations, all on a fixed height desk: no-incline, 12° incline, 25° incline, no-incline with external mouse, 25° incline with an external mouse, and a commercially available riser with external mouse and keyboard. After completion of the task, subjects rated the configuration for comfort and ease of use and indicated perceived discomfort in several body segments. Compared to the no-incline configuration, use of the 12° incline reduced forward head tilt and neck flexion while increasing wrist extension. The 25° incline further reduced head tilt and neck flexion while further increasing wrist extension. The 25° incline received the lowest comfort and ease of use ratings and the highest perceived discomfort score. For portable, temporary computing environments where internal input devices are used, users may find improved head and neck postures with acceptable wrist extension postures with the utilization of a 12° incline. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Cost-Effectiveness Analysis of the Automation of a Circulation System.

ERIC Educational Resources Information Center

Mosley, Isobel

A general methodology for cost effectiveness analysis was developed and applied to the Colorado State University library loan desk. The cost effectiveness of the existing semi-automated circulation system was compared with that of a fully manual one, based on the existing manual subsystem. Faculty users' time and computer operating costs were…

Contract Training and Computer-Assisted Instruction at Santa Fe Community College.

ERIC Educational Resources Information Center

Ortego, Sheila; Richards, Beverly

In summer 1993, Santa Fe Community College, New Mexico, created the External Programs Division (EPD) under its credit instruction program to serve the needs of non-traditional students. The EPD encompasses contract training, the Flex Lab, distance education, the AutoDesk Training Center, an Alternative Fuels program, and the corrections training…

Information About a Layperson's Knowledge Supports Experts in Giving Effective and Efficient Online Advice to Laypersons

ERIC Educational Resources Information Center

Nuckles, Matthias; Wittwer, Jorg; Renkl, Alexander

2005-01-01

To give effective and efficient advice to laypersons, experts should adapt their explanations to the layperson's knowledge. However, experts often fail to consider the limited domain knowledge of laypersons. To support adaptation in asynchronous help desk communication, researchers provided computer experts with information about a layperson's…

Exergaming for Physical Activity in Online Physical Education

ERIC Educational Resources Information Center

Kooiman, Brian J.; Sheehan, Dwayne P.; Wesolek, Michael; Reategui, Eliseo

2016-01-01

For many the thought of students taking an online course conjures up images of students sitting at a computer desk. Students taking online physical education (OLPE) at home may lack opportunities for competitive or cooperative physical activity that are available to students in a traditional setting. Active video games (exergames) can be played…

Redesigning a Library Space for Collaborative Learning

ERIC Educational Resources Information Center

Gabbard, Ralph B.; Kaiser, Anthony; Kaunelis, David

2007-01-01

The reference desk at Indiana State University's (ISU) library offers an excellent view of student work areas on the first floor. From this vantage point, the reference librarians noticed students, especially in the evening and on weekends, huddled together in small groups, with one student at the keyboard of a laptop or desktop computer. The…

Confronting Cyberterrorism with Cyber Deception

DTIC Science & Technology

2003-12-01

break into computer systems. A further development in social engineering is the use of online translators and 41 relay telephony services that...allow social engineers to exploit and overcome language barriers [Ollmann, 2003]. Relay telephony services are online services provided by...open source media or actively seeking the information through unscrupulous means. - Desk checking - Social engineering - Dumpster diving

Automation of vibroacoustic data bank for random vibration criteria development. [for the space shuttle and launch vehicles

NASA Technical Reports Server (NTRS)

Ferebee, R. C.

1982-01-01

A computerized data bank system was developed for utilization of large amounts of vibration and acoustic data to formulate component random vibration design and test criteria. This system consists of a computer, graphics tablet, and a dry-silver hard copier which are all desk-top type hardware and occupy minimal space. The data bank contains data from the Saturn V and Titan III flight and static test programs. The vibration and acoustic data are stored in the form of power spectral density and one-third octave band plots over the frequency range from 20 to 2000 Hz. The data was stored by digitizing each spectral plot by tracing with the graphics tablet. The digitized data was statistically analyzed and the resulting 97.5% probability levels were stored on tape along with the appropriate structural parameters. Standard extrapolation procedures were programmed for prediction of component random vibration test criteria for new launch vehicle and payload configurations. This automated vibroacoustic data bank system greatly enhances the speed and accuracy of formulating vibration test criteria. In the future, the data bank will be expanded to include all data acquired from the space shuttle flight test program.

Information Desks in ARL Libraries. SPEC (Systems and Procedures Exchange Center) Kit #172.

ERIC Educational Resources Information Center

Association of Research Libraries, Washington, DC. Office of Management Studies.

For this kit, 119 Association of Research Libraries (ARL) academic libraries were surveyed to identify: (1) the practices in the area of information desks; (2) information desk staffing; (3) information desk functions; and (4) their relation to the other service points within the particular library. Responses were received from 87 libraries, some…

A modular finite-element model (MODFE) for areal and axisymmetric ground-water-flow problems, Part 3: Design philosophy and programming details

USGS Publications Warehouse

Torak, L.J.

1993-01-01

A MODular Finite-Element, digital-computer program (MODFE) was developed to simulate steady or unsteady-state, two-dimensional or axisymmetric ground-water-flow. The modular structure of MODFE places the computationally independent tasks that are performed routinely by digital-computer programs simulating ground-water flow into separate subroutines, which are executed from the main program by control statements. Each subroutine consists of complete sets of computations, or modules, which are identified by comment statements, and can be modified by the user without affecting unrelated computations elsewhere in the program. Simulation capabilities can be added or modified by either adding or modifying subroutines that perform specific computational tasks, and the modular-program structure allows the user to create versions of MODFE that contain only the simulation capabilities that pertain to the ground-water problem of interest. MODFE is written in a Fortran programming language that makes it virtually device independent and compatible with desk-top personal computers and large mainframes. MODFE uses computer storage and execution time efficiently by taking advantage of symmetry and sparseness within the coefficient matrices of the finite-element equations. Parts of the matrix coefficients are computed and stored as single-subscripted variables, which are assembled into a complete coefficient just prior to solution. Computer storage is reused during simulation to decrease storage requirements. Descriptions of subroutines that execute the computational steps of the modular-program structure are given in tables that cross reference the subroutines with particular versions of MODFE. Programming details of linear and nonlinear hydrologic terms are provided. Structure diagrams for the main programs show the order in which subroutines are executed for each version and illustrate some of the linear and nonlinear versions of MODFE that are possible. Computational aspects of changing stresses and boundary conditions with time and of mass-balance and error terms are given for each hydrologic feature. Program variables are listed and defined according to their occurrence in the main programs and in subroutines. Listings of the main programs and subroutines are given.

The effects of pencil grip posture and different desk designs on handwriting performance in children with hemiplegic cerebral palsy.

PubMed

Kavak, Sermin Tukel; Bumin, Gonca

2009-01-01

The aim of this study was to investigate the effect of different ergonomic desk designs and pencil grip patterns on handwriting performance in children with hemiplegic cerebral palsy and healthy children. Twenty-six children with left hemiplegic cerebral palsy and 32 typically developing children were included. The Minnesota Handwriting Assessment was used to evaluate handwriting abilities. Pencil grip posture was assessed with a 5-point rating system. Specifically designed adjustable desks and chairs were used. Four different desk types were used in this study: 1) regular desk; 2) regular desk with a 20 degrees inclination; 3) cutout desk; and 4) cutout desk with a 20 degrees inclination. Statistically significant differences were found between both groups in terms of handwriting ability (p < 0.001). There was no significant difference regarding grip scores between children with cerebral palsy and healthy children (p > 0.05). We found that children with cerebral palsy had better performance using cutout desks in relation to rate and spacing parameters of handwriting (p < 0.05). The results of our study demonstrated that the pencil grip patterns have no effect on the handwriting parameters in both children with cerebral palsy and healthy children. It is recommended that a cutout table be used to provide more upper extremity support in handwriting activities for students with cerebral palsy.

The potential of bike desks to reduce sedentary time in the office: a mixed-method study.

PubMed

Torbeyns, T; de Geus, B; Bailey, S; Decroix, L; Meeusen, R

2017-03-01

To investigate the use of bike desks in an office setting and office workers' experiences of bike desks. Mixed-method study; quantitative data of cycling desk use in combination with qualitative data of users' experience were obtained via questionnaires. Bike desks were provided in an office setting during a five-month period. The amount of cycled time, distance and the cycling intensity were registered. At the end of the intervention period, participants filled out a questionnaire about their experiences of cycling desks in the office. Participants cycled for approximately 98 min/week. Most participants were very positive about their bike desk experience and almost all of them would continue using them. About one third of the participants experienced a positive effect on attention and work performance and for about two thirds it positively influenced their motivation during work. Furthermore, about half of the participants felt more energetic, more self-confident and perceived a positive effect on their health and lifestyle. Providing bike desks in an office reduces office workers sedentary time. Furthermore, people experienced positive effects on several personal and work-related parameters. Therefore, providing bike desks in office settings seems to be a promising means to reduce sedentary time. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Building A Help Desk System

ERIC Educational Resources Information Center

O'Shea, Sheryl

2005-01-01

Are you trying to support an entire school district full of computers with just a few hardware technicians? Do you have a non-technical person answering the phone? Are the teachers getting upset because of the length of time it takes to resolve their issues? Unfortunately, I had to answer yes to all three questions. Our school district includes…

Beyond "Classroom" Technology: The Equipment Circulation Program at Rasmuson Library, University of Alaska Fairbanks

ERIC Educational Resources Information Center

Jensen, Karen

2008-01-01

The library at the University of Alaska Fairbanks offers a unique equipment lending program through its Circulation Desk. The program features a wide array of equipment types, generous circulation policies, and unrestricted borrowing, enabling students, staff, and faculty to experiment with the latest in audio, video, and computer technologies,…

Con Artists Attack Colleges with Fake Help-Desk E-Mail

ERIC Educational Resources Information Center

Young, Jeffrey R.

2008-01-01

An e-mail scam has hit tens of thousands of users at dozens of colleges over the past few weeks, leaving network administrators scrambling to respond before campus computer accounts are taken over by spammers. Students, professors, and staff members at the affected colleges received e-mail messages that purported to come from the colleges' help…

Methods of applied dynamics

NASA Technical Reports Server (NTRS)

Rheinfurth, M. H.; Wilson, H. B.

1991-01-01

The monograph was prepared to give the practicing engineer a clear understanding of dynamics with special consideration given to the dynamic analysis of aerospace systems. It is conceived to be both a desk-top reference and a refresher for aerospace engineers in government and industry. It could also be used as a supplement to standard texts for in-house training courses on the subject. Beginning with the basic concepts of kinematics and dynamics, the discussion proceeds to treat the dynamics of a system of particles. Both classical and modern formulations of the Lagrange equations, including constraints, are discussed and applied to the dynamic modeling of aerospace structures using the modal synthesis technique.

Allocation of Physician Time in Ambulatory Practice: A Time and Motion Study in 4 Specialties.

PubMed

Sinsky, Christine; Colligan, Lacey; Li, Ling; Prgomet, Mirela; Reynolds, Sam; Goeders, Lindsey; Westbrook, Johanna; Tutty, Michael; Blike, George

2016-12-06

Little is known about how physician time is allocated in ambulatory care. To describe how physician time is spent in ambulatory practice. Quantitative direct observational time and motion study (during office hours) and self-reported diary (after hours). U.S. ambulatory care in 4 specialties in 4 states (Illinois, New Hampshire, Virginia, and Washington). 57 U.S. physicians in family medicine, internal medicine, cardiology, and orthopedics who were observed for 430 hours, 21 of whom also completed after-hours diaries. Proportions of time spent on 4 activities (direct clinical face time, electronic health record [EHR] and desk work, administrative tasks, and other tasks) and self-reported after-hours work. During the office day, physicians spent 27.0% of their total time on direct clinical face time with patients and 49.2% of their time on EHR and desk work. While in the examination room with patients, physicians spent 52.9% of the time on direct clinical face time and 37.0% on EHR and desk work. The 21 physicians who completed after-hours diaries reported 1 to 2 hours of after-hours work each night, devoted mostly to EHR tasks. Data were gathered in self-selected, high-performing practices and may not be generalizable to other settings. The descriptive study design did not support formal statistical comparisons by physician and practice characteristics. For every hour physicians provide direct clinical face time to patients, nearly 2 additional hours is spent on EHR and desk work within the clinic day. Outside office hours, physicians spend another 1 to 2 hours of personal time each night doing additional computer and other clerical work. American Medical Association.

Interactive Software For Astrodynamical Calculations

NASA Technical Reports Server (NTRS)

Schlaifer, Ronald S.; Skinner, David L.; Roberts, Phillip H.

1995-01-01

QUICK computer program provides user with facilities of sophisticated desk calculator performing scalar, vector, and matrix arithmetic; propagate conic-section orbits; determines planetary and satellite coordinates; and performs other related astrodynamic calculations within FORTRAN-like software environment. QUICK is interpreter, and no need to use compiler or linker to run QUICK code. Outputs plotted in variety of formats on variety of terminals. Written in RATFOR.

Difference in caloric expenditure in sitting versus standing desks.

PubMed

Reiff, Christopher; Marlatt, Kara; Dengel, Donald R

2012-09-01

Traditional desks require students to sit; however, recently schools have provided students with nontraditional standing desks. The purpose of this study was to investigate differences in caloric expenditure of young adults while sitting at a standard classroom desk and standing at a nontraditional standing classroom desk. Twenty (10 male/10 female) young (22.8 ± 1.9 y), healthy participants reported to the laboratory between the hours of 7:00 AM and 2:00 PM following a 12-h fast and 48-h break in exercise. Participants were randomly assigned to perform a series of mathematical problems either sitting at a normal classroom desk or standing at a nontraditional standing desk. Inspired and expired gases were collected for 45-min for the determination of oxygen consumption (VO2), carbon dioxide production (VCO2), and minute ventilation (VE) using a metabolic gas system. There were significant increases from sitting to standing in VO2 (0.22 ± 0.05 vs. 0.28 ± 0.05 L·min-1, P ≤ .0001), VCO2 (0.18 ± 0.05 vs. 0.24 ± 0.050 L·min-1, P ≤ .0001), VE (7.72 ± 0.67 vs. 9.41 ± 1.20 L·min-1, P ≤ .0001), and kilocalories expended per minute (1.36 ± 0.20 kcal/min, P ≤ .0001 vs. 1.02 ± 0.22 kcal/min, P ≤ .0001). Results indicate a significant increase in caloric expenditure in subjects that were standing at a standing classroom desk compared with sitting at a standard classroom desk.

Treadmill desks: A 1-year prospective trial.

PubMed

Koepp, Gabriel A; Manohar, Chinmay U; McCrady-Spitzer, Shelly K; Ben-Ner, Avner; Hamann, Darla J; Runge, Carlisle F; Levine, James A

2013-04-01

Sedentariness is associated with weight gain and obesity. A treadmill desk is the combination of a standing desk and a treadmill that allow employees to work while walking at low speed. The hypothesis was that a 1-year intervention with treadmill desks is associated with an increase in employee daily physical activity (summation of all activity per minute) and a decrease in daily sedentary time (zero activity). Employees (n = 36; 25 women, 11 men) with sedentary jobs (87 ± 27 kg, BMI 29 ± 7 kg/m(2) , n = 10 Lean BMI < 25 kg/m(2) , n = 15 Overweight 25 < BMI < 30 kg/m(2) , n = 11 Obese BMI > 30 kg/m(2) ) volunteered to have their traditional desk replaced with a treadmill desk to promote physical activity for 1 year. Daily physical activity (using accelerometers), work performance, body composition, and blood variables were measured at Baseline and 6 and 12 months after the treadmill desk intervention. Subjects who used the treadmill desk increased daily physical activity from baseline 3,353 ± 1,802 activity units (AU)/day to, at 6 months, 4,460 ± 2,376 AU/day (P < 0.001), and at 12 months, 4,205 ± 2,238 AU/day (P < 0.001). Access to the treadmill desks was associated with significant decreases in daily sedentary time (zero activity) from at baseline 1,020 ± 75 min/day to, at 6 months, 929 ± 84 min/day (P < 0.001), and at 12 months, 978 ± 95 min/day (P < 0.001). For the whole group, weight loss averaged 1.4 ± 3.3 kg (P < 0.05). Weight loss for obese subjects was 2.3 ± 3.5 kg (P < 0.03). Access to the treadmill desks was associated with increased daily physical activity compared to traditional chair-based desks; their deployment was not associated with altered performance. For the 36 participants, fat mass did not change significantly, however, those who lost weight (n = 22) lost 3.4 ± 5.4 kg (P < 0.001) of fat mass. Weight loss was greatest in people with obesity. Access to treadmill desks may improve the health of office workers without affecting work performance. Copyright © 2012 The Obesity Society.

Sit-stand desks in call centres: associations of use and ergonomics awareness with sedentary behavior.

PubMed

Straker, Leon; Abbott, Rebecca A; Heiden, Marina; Mathiassen, Svend Erik; Toomingas, Allan

2013-07-01

To investigate whether or not use of sit-stand desks and awareness of the importance of postural variation and breaks are associated with the pattern of sedentary behavior in office workers. The data came from a cross-sectional observation study of Swedish call centre workers. Inclinometers recorded 'seated' or 'standing/walking' episodes of 131 operators over a full work shift. Differences in sedentary behavior based on desk type and awareness of the importance of posture variation and breaks were assessed by non-parametric analyses. 90 (68.7%) operators worked at a sit-stand desk. Working at a sit-stand desk, as opposed to a sit desk, was associated with less time seated (78.5 vs 83.8%, p = 0.010), and less time taken to accumulate 5 min of standing/walking (36.2 vs 46.3 min, p = 0.022), but no significant difference to sitting episode length or the number of switches between sitting and standing/walking per hour. Ergonomics awareness was not associated with any sedentary pattern variable among those using a sit-stand desk. Use of sit-stand desks was associated with better sedentary behavior in call centre workers, however ergonomics awareness did not enhance the effect. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

NOSTOS: a paper-based ubiquitous computing healthcare environment to support data capture and collaboration.

PubMed

Bång, Magnus; Larsson, Anders; Eriksson, Henrik

2003-01-01

In this paper, we present a new approach to clinical workplace computerization that departs from the window-based user interface paradigm. NOSTOS is an experimental computer-augmented work environment designed to support data capture and teamwork in an emergency room. NOSTOS combines multiple technologies, such as digital pens, walk-up displays, headsets, a smart desk, and sensors to enhance an existing paper-based practice with computer power. The physical interfaces allow clinicians to retain mobile paper-based collaborative routines and still benefit from computer technology. The requirements for the system were elicited from situated workplace studies. We discuss the advantages and disadvantages of augmenting a paper-based clinical work environment.

Preferred seat orientation of senior high-school students.

PubMed

Tuttle, N; Barrett, R; Gass, E

2007-10-01

The height of the front of the seat is the primary determinant of appropriate seat size in the school setting. In the present study, this dimension was fixed at 445 mm and, using a brief adjustment period, students adjusted the angle of the seat to their preferred rear seat height (PRSH) under three fixed and one adjustable desk height conditions and for one desk height, under two time conditions. PRSH was significantly greater at an 800 mm desk height (454+/-14 mm) compared to 735 mm (447+/-15 mm) and 720 mm (444+/-16 mm). When desk height as well as rear seat height were adjustable, PRSH was 446+/-15 mm and preferred desk height 751+/-25 mm. Taller students or those with larger popliteal heights selected lower PRSHs at all desk heights, with PRSH more strongly related to popliteal height (r = -0.54 to -0.59) than stature (r = -0.44 to -0.50). No differences were found in PRSH between short (<5 min) and long (30 min) adjustment periods for the 735 mm desk height. The nearly horizontal seat positions found in this study were between those recommended by other authors.

The Help Desk.

ERIC Educational Resources Information Center

Klein, Regina; And Others

1988-01-01

The first of three articles describes the results of a survey that examined characteristics and responsibilities of help-desk personnel at major database and online services. The second provides guidelines to using such customer services, and the third lists help-desk numbers for online databases and systems. (CLB)

Reducing children's classroom sitting time using sit-to-stand desks: findings from pilot studies in UK and Australian primary schools.

PubMed

Clemes, Stacy A; Barber, Sally E; Bingham, Daniel D; Ridgers, Nicola D; Fletcher, Elly; Pearson, Natalie; Salmon, Jo; Dunstan, David W

2016-09-01

This research examined the influence of sit-to-stand desks on classroom sitting time in primary school children. Pilot controlled trials with similar intervention strategies were conducted in primary schools in Melbourne, Australia, and Bradford, UK. Sit-to-stand desks replaced all standard desks in the Australian intervention classroom. Six sit-to-stand desks replaced a bank of standard desks in the UK intervention classroom. Children were exposed to the sit-to-stand desks for 9-10 weeks. Control classrooms retained their normal seated desks. Classroom sitting time was measured at baseline and follow-up using the activPAL3 inclinometer. Thirty UK and 44 Australian children provided valid activPAL data at baseline and follow-up. The proportion of time spent sitting in class decreased significantly at follow-up in both intervention groups (UK: -9.8 ± 16.5% [-52.4 ± 66.6 min/day]; Australian: -9.4 ± 10% [-43.7 ± 29.9 min/day]). No significant changes in classroom sitting time were observed in the UK control group, while a significant reduction was observed in the Australian control group (-5.9 ± 11.7% [-28.2 ± 28.3 min/day]). Irrespective of implementation, incorporating sit-to-stand desks into classrooms appears to be an effective way of reducing classroom sitting in this diverse sample of children. Longer term efficacy trials are needed to determine effects on children's health and learning. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Treadmill Desks at LANL - Pilot Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fellows, Samara Kia

It is well established that sedentariness is the largest, preventable contributor to premature death, eclipsing smoking in recent years. One approach to reduce sedentariness is by using a treadmill desk to perform office work while walking at a low speed.We found an increased interest level when the treadmill desks were first introduced to LANL, but after a few months interest appeared to drop. It is possible that treadmill desk use was occurring, but subjects did not record their use. The treadmill desks will not be readily available for purchase by employees due to the study outcome. Additionally, conclusive changes inmore » body measurements could not be performed due to lack of follow up by 58% of the participants.« less

Business Combinations Desk Book

DTIC Science & Technology

2003-09-01

Business Combinations Desk Book Deputy Under Secretary of Defense (Industrial Policy) Deputy General Counsel (Acquisition & Logistics) September 2003...SEP 2003 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Business Combinations Desk Book 5a. CONTRACT NUMBER 5b. GRANT NUMBER...1 2 Defense Business

Workplace interventions for reducing sitting at work.

PubMed

Shrestha, Nipun; Kukkonen-Harjula, Katriina T; Verbeek, Jos H; Ijaz, Sharea; Hermans, Veerle; Pedisic, Zeljko

2018-06-20

A large number of people are employed in sedentary occupations. Physical inactivity and excessive sitting at workplaces have been linked to increased risk of cardiovascular disease, obesity, and all-cause mortality. To evaluate the effectiveness of workplace interventions to reduce sitting at work compared to no intervention or alternative interventions. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, Embase, CINAHL, OSH UPDATE, PsycINFO, ClinicalTrials.gov, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) search portal up to 9 August 2017. We also screened reference lists of articles and contacted authors to find more studies. We included randomised controlled trials (RCTs), cross-over RCTs, cluster-randomised controlled trials (cluster-RCTs), and quasi-RCTs of interventions to reduce sitting at work. For changes of workplace arrangements, we also included controlled before-and-after studies. The primary outcome was time spent sitting at work per day, either self-reported or measured using devices such as an accelerometer-inclinometer and duration and number of sitting bouts lasting 30 minutes or more. We considered energy expenditure, total time spent sitting (including sitting at and outside work), time spent standing at work, work productivity and adverse events as secondary outcomes. Two review authors independently screened titles, abstracts and full-text articles for study eligibility. Two review authors independently extracted data and assessed risk of bias. We contacted authors for additional data where required. We found 34 studies - including two cross-over RCTs, 17 RCTs, seven cluster-RCTs, and eight controlled before-and-after studies - with a total of 3,397 participants, all from high-income countries. The studies evaluated physical workplace changes (16 studies), workplace policy changes (four studies), information and counselling (11 studies), and multi-component interventions (four studies). One study included both physical workplace changes and information and counselling components. We did not find any studies that specifically investigated the effects of standing meetings or walking meetings on sitting time.Physical workplace changesInterventions using sit-stand desks, either alone or in combination with information and counselling, reduced sitting time at work on average by 100 minutes per workday at short-term follow-up (up to three months) compared to sit-desks (95% confidence interval (CI) -116 to -84, 10 studies, low-quality evidence). The pooled effect of two studies showed sit-stand desks reduced sitting time at medium-term follow-up (3 to 12 months) by an average of 57 minutes per day (95% CI -99 to -15) compared to sit-desks. Total sitting time (including sitting at and outside work) also decreased with sit-stand desks compared to sit-desks (mean difference (MD) -82 minutes/day, 95% CI -124 to -39, two studies) as did the duration of sitting bouts lasting 30 minutes or more (MD -53 minutes/day, 95% CI -79 to -26, two studies, very low-quality evidence).We found no significant difference between the effects of standing desks and sit-stand desks on reducing sitting at work. Active workstations, such as treadmill desks or cycling desks, had unclear or inconsistent effects on sitting time.Workplace policy changesWe found no significant effects for implementing walking strategies on workplace sitting time at short-term (MD -15 minutes per day, 95% CI -50 to 19, low-quality evidence, one study) and medium-term (MD -17 minutes/day, 95% CI -61 to 28, one study) follow-up. Short breaks (one to two minutes every half hour) reduced time spent sitting at work on average by 40 minutes per day (95% CI -66 to -15, one study, low-quality evidence) compared to long breaks (two 15-minute breaks per workday) at short-term follow-up.Information and counsellingProviding information, feedback, counselling, or all of these resulted in no significant change in time spent sitting at work at short-term follow-up (MD -19 minutes per day, 95% CI -57 to 19, two studies, low-quality evidence). However, the reduction was significant at medium-term follow-up (MD -28 minutes per day, 95% CI -51 to -5, two studies, low-quality evidence).Computer prompts combined with information resulted in no significant change in sitting time at work at short-term follow-up (MD -10 minutes per day, 95% CI -45 to 24, two studies, low-quality evidence), but at medium-term follow-up they produced a significant reduction (MD -55 minutes per day, 95% CI -96 to -14, one study). Furthermore, computer prompting resulted in a significant decrease in the average number (MD -1.1, 95% CI -1.9 to -0.3, one study) and duration (MD -74 minutes per day, 95% CI -124 to -24, one study) of sitting bouts lasting 30 minutes or more.Computer prompts with instruction to stand reduced sitting at work on average by 14 minutes per day (95% CI 10 to 19, one study) more than computer prompts with instruction to walk at least 100 steps at short-term follow-up.We found no significant reduction in workplace sitting time at medium-term follow-up following mindfulness training (MD -23 minutes per day, 95% CI -63 to 17, one study, low-quality evidence). Similarly a single study reported no change in sitting time at work following provision of highly personalised or contextualised information and less personalised or contextualised information. One study found no significant effects of activity trackers on sitting time at work.Multi-component interventions Combining multiple interventions had significant but heterogeneous effects on sitting time at work (573 participants, three studies, very low-quality evidence) and on time spent in prolonged sitting bouts (two studies, very low-quality evidence) at short-term follow-up. At present there is low-quality evidence that the use of sit-stand desks reduce workplace sitting at short-term and medium-term follow-ups. However, there is no evidence on their effects on sitting over longer follow-up periods. Effects of other types of interventions, including workplace policy changes, provision of information and counselling, and multi-component interventions, are mostly inconsistent. The quality of evidence is low to very low for most interventions, mainly because of limitations in study protocols and small sample sizes. There is a need for larger cluster-RCTs with longer-term follow-ups to determine the effectiveness of different types of interventions to reduce sitting time at work.

32 CFR 637.19 - Overseas MP desk.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Overseas MP desk. 637.19 Section 637.19 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MILITARY POLICE INVESTIGATION Investigations § 637.19 Overseas MP desk. The recording of telephone...

Learning to Stand: The Acceptability and Feasibility of Introducing Standing Desks into College Classrooms

PubMed Central

Benzo, Roberto M.; Gremaud, Allene L.; Jerome, Matthew; Carr, Lucas J.

2016-01-01

Prolonged sedentary behavior is an independent risk factor for multiple negative health outcomes. Evidence supports introducing standing desks into K-12 classrooms and work settings to reduce sitting time, but no studies have been conducted in the college classroom environment. The present study explored the acceptability and feasibility of introducing standing desks in college classrooms. A total of 993 students and 149 instructors completed a single online needs assessment survey. This cross-sectional study was conducted during the fall semester of 2015 at a large Midwestern University. The large majority of students (95%) reported they would prefer the option to stand in class. Most students (82.7%) reported they currently sit during their entire class time. Most students (76.6%) and instructors (86.6%) reported being in favor of introducing standing desks into college classrooms. More than half of students and instructors predicted having access to standing desks in class would improve student’s “physical health”, “attention”, and “restlessness”. Collectively, these findings support the acceptability of introducing standing desks in college classrooms. Future research is needed to test the feasibility, cost-effectiveness and efficacy of introducing standing desks in college classrooms. Such studies would be useful for informing institutional policies regarding classroom designs. PMID:27537901

Library Information Desk. An Organizational and Operating Guide.

ERIC Educational Resources Information Center

Souza, Mary Beth

Intended for those who manage, organize, and oversee the information desk of the State University of New York at Stony Brook Library, this guide contains practical information about staffing, acquiring materials, and operating procedures. The guide opens with a list of suggestions for recruiting and scheduling volunteers for the information desk.…

Reference manual for the Thermal Analyst's Help Desk Expert System

NASA Technical Reports Server (NTRS)

Ormsby, Rachel A.

1994-01-01

This document provides technical information and programming guidance for the maintenance and future development of the Thermal Analyst's Help Desk. Help Desk is an expert system that operates within the EXSYSTM expert system shell, and is used to determine first approximations of thermal capacity for spacecraft and instruments. The five analyses supported in Help Desk are: (1) surface area required for a radiating surface, (2) equilibrium temperature of a surface, (3) enclosure temperature and heat loads for a defined position in orbit, (4) enclosure temperature and heat loads over a complete orbit and, (5) selection of appropriate surface properties. The two geometries supported by Help Desk are a single flat plate and a rectangular box enclosure. The technical information includes the mathematical approach and analytical derivations used in the analyses such as: radiation heat balance, view factor calculation, and orbit determination with coordinate transformation. The programming guide for developers describes techniques for enhancement of Help Desk. Examples are provided showing the addition of new features, user interface development and enhancement, and external program interfaces.

Using Symbolic TI Calculators in Engineering Mathematics: Sample Tasks and Reflections from a Decade of Practice

ERIC Educational Resources Information Center

Beaudin, Michel; Picard, Gilles

2010-01-01

Starting in September 1999, new students at ETS were required to own the TI-92 Plus or TI-89 symbolic calculator and since September 2002, the Voyage 200. Looking back at these ten years of working with a computer algebra system on every student's desk, one could ask whether the introduction of this hand-held technology has really forced teachers…

Interest in Using Workplace Energy Expenditure Devices Among Primary Care Patients

PubMed Central

Rovniak, Liza S.; Sciamanna, Christopher N.; George, Daniel R.; Bopp, Melissa; Kong, Lan; Ding, Ding

2015-01-01

Background: Workplace energy expenditure devices (WEEDs), such as bicycle desks and treadmill desks, can contribute to weight gain prevention and disease risk-reduction. Little is known about the extent to which adults with diverse health risk factors are interested in using WEEDs. Methods: Primary care patients aged 18 to 65 years at 2 outpatient clinics in Central Pennsylvania completed a cross-sectional survey in April, 2014 to assess interest in using “a small pedaling device under the desk” and “walking on a treadmill with a desk attached” if these options were provided at no cost. Demographic and health risk factors were also assessed. Multiple logistic regression analyses were used to examine the associations of demographic and health risk factors with interest in using WEEDs. Results: Among 240 patients, 106 (44.2%) reported interest in using WEEDs. Of these 106 patients, interest in using a bicycle desk (91.5%) was higher than interest in using a treadmill desk (65.1%), P < .001. Females were more likely than males to be interested in using a bicycle desk, and patients aged 18 to 44 years were more likely than those aged 45 to 65 years to be interested in using a treadmill desk. Conclusions: Results suggest that diverse patient populations may have interest in using WEEDs. Promoting use of WEEDs in primary care practices could help meet national standards for providing comprehensive, patient-centered care. PMID:26718917

The Data Egg: A new solution to text entry barriers

NASA Technical Reports Server (NTRS)

Friedman, Gary L.

1993-01-01

A unit that allows text entry with only one hand has been developed, and holds the promise of allowing computers to be truly portable. It is unique in that it allows operation in any position, freeing the user from the traditional constraints of having to be seated near a desk. This hand held, chord-key-based unit can be used either autonomously for idea capturing, or tethered to a personal computer and used as an auxiliary keyboard. Astronauts, journalists, the bedridden, and anyone else normally barred from using a computer while on the job could also benefit from this form of man-machine interface, which has been dubbed the 'Data Egg'.

NOSTOS: A Paper–Based Ubiquitous Computing Healthcare Environment to Support Data Capture and Collaboration

PubMed Central

Bång, Magnus; Larsson, Anders; Eriksson, Henrik

2003-01-01

In this paper, we present a new approach to clinical workplace computerization that departs from the window–based user interface paradigm. NOSTOS is an experimental computer–augmented work environment designed to support data capture and teamwork in an emergency room. NOSTOS combines multiple technologies, such as digital pens, walk–up displays, headsets, a smart desk, and sensors to enhance an existing paper–based practice with computer power. The physical interfaces allow clinicians to retain mobile paper–based collaborative routines and still benefit from computer technology. The requirements for the system were elicited from situated workplace studies. We discuss the advantages and disadvantages of augmenting a paper–based clinical work environment. PMID:14728131

Reference Transactions Analysis: The Cost-Effectiveness of Staffing a Traditional Academic Reference Desk

ERIC Educational Resources Information Center

Ryan, Susan M.

2008-01-01

This study categorizes 6959 reference desk transactions to determine how many of the queries require the attention of a librarian. Results indicate that 89% could likely be answered by non-librarians. From the results of this and other studies, the author explores the cost-effectiveness of staffing a traditional reference desk with librarians.…

78 FR 44994 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-25

... its proprietary and/or market-making desk to trade at prices that would satisfy customer orders held.../or market-making desk at prices that would satisfy the customer order. If a Trading Permit Holder... proprietary and/or market- making desk to trade at prices that would satisfy customer orders held as a...

Estimation of Subjective Difficulty and Psychological Stress by Ambient Sensing of Desk Panel Vibrations

NASA Astrophysics Data System (ADS)

Hamaguchi, Nana; Yamamoto, Keiko; Iwai, Daisuke; Sato, Kosuke

We investigate ambient sensing techniques that recognize writer's psychological states by measuring vibrations of handwriting on a desk panel using a piezoelectric contact sensor attached to its underside. In particular, we describe a technique for estimating the subjective difficulty of a question for a student as the ratio of the time duration of thinking to the total amount of time spent on the question. Through experiments, we confirm that our technique correctly recognizes whether or not a person writes something down on paper by measured vibration data at the accuracy of over 80 %, and that the order of computed subjective difficulties of three questions is coincident with that reported by the subject in 60 % of experiments. We also propose a technique to estimate a writer's psychological stress by using the standard deviation of the spectrum of the measured vibration. Results of a proof-of-concept experiment show that the proposed technique correctly estimates whether or not the subject feels stress at least 90 % of the time.

Computational strategies for alternative single-step Bayesian regression models with large numbers of genotyped and non-genotyped animals.

PubMed

Fernando, Rohan L; Cheng, Hao; Golden, Bruce L; Garrick, Dorian J

2016-12-08

Two types of models have been used for single-step genomic prediction and genome-wide association studies that include phenotypes from both genotyped animals and their non-genotyped relatives. The two types are breeding value models (BVM) that fit breeding values explicitly and marker effects models (MEM) that express the breeding values in terms of the effects of observed or imputed genotypes. MEM can accommodate a wider class of analyses, including variable selection or mixture model analyses. The order of the equations that need to be solved and the inverses required in their construction vary widely, and thus the computational effort required depends upon the size of the pedigree, the number of genotyped animals and the number of loci. We present computational strategies to avoid storing large, dense blocks of the MME that involve imputed genotypes. Furthermore, we present a hybrid model that fits a MEM for animals with observed genotypes and a BVM for those without genotypes. The hybrid model is computationally attractive for pedigree files containing millions of animals with a large proportion of those being genotyped. We demonstrate the practicality on both the original MEM and the hybrid model using real data with 6,179,960 animals in the pedigree with 4,934,101 phenotypes and 31,453 animals genotyped at 40,214 informative loci. To complete a single-trait analysis on a desk-top computer with four graphics cards required about 3 h using the hybrid model to obtain both preconditioned conjugate gradient solutions and 42,000 Markov chain Monte-Carlo (MCMC) samples of breeding values, which allowed making inferences from posterior means, variances and covariances. The MCMC sampling required one quarter of the effort when the hybrid model was used compared to the published MEM. We present a hybrid model that fits a MEM for animals with genotypes and a BVM for those without genotypes. Its practicality and considerable reduction in computing effort was demonstrated. This model can readily be extended to accommodate multiple traits, multiple breeds, maternal effects, and additional random effects such as polygenic residual effects.

It Is Not Just about the Schedule: Key Factors in Effective Reference Desk Scheduling and Management

ERIC Educational Resources Information Center

Sciammarella, Susan; Fernandes, Maria Isabel; McKay, Devin

2008-01-01

Reference desk scheduling is one of the most challenging tasks in the organizational structure of an academic library. The ability to turn this challenge into a workable and effective function lies with the scheduler and indirectly the cooperation of all librarians scheduled for reference desk service. It is the scheduler's sensitivity to such…

Productivity of transcriptionists using a treadmill desk.

PubMed

Thompson, Warren G; Levine, James A

2011-01-01

Time spent sitting increases all-cause mortality. Sedentary occupations are a major contributor to the obesity epidemic. A treadmill desk offers the potential to increase activity while working; however, it is important to make sure that productivity does not decline. The purpose of this study is to evaluate productivity while using a treadmill desk. Eleven experienced medical transcriptionists participated in the study. Transcriptionists were given 4 hours training in the use of a treadmill desk. They were asked to transcribe tapes for 8 hours both while sitting and while using the treadmill desk. Speed and accuracy of transcription were compared as were the average expended calories per hour. The accuracy of transcription did not differ between sitting and walking transcriptions. The speed of transcription was 16% slower while walking than while sitting (p < 0.001). The transcriptionists expended 100 calories per hour more when they transcribed while walking than when they transcribed while sitting (p < 0.001). The treadmill desk offers a way to reduce sedentariness in the workplace and has potential to reduce employee obesity and health care costs. However, more than 4 hours of training will be necessary to prevent a significant drop in employee productivity.

Evaluation of ergonomic and education interventions to reduce occupational sitting in office-based university workers: study protocol for a randomized controlled trial.

PubMed

Radas, Antonia; Mackey, Martin; Leaver, Andrew; Bouvier, Anna-Louise; Chau, Josephine Y; Shirley, Debra; Bauman, Adrian

2013-10-12

Prolonged sitting is a specific occupational hazard in office workers. There is growing evidence that prolonged sitting is detrimental to metabolic health. The aim of this study is to determine whether providing office workers with education along with adjustable sit-stand workstations leads to reduction in sitting behavior. A randomized control trial (RCT) with three groups (one control group and two intervention groups) will be conducted in an office workplace setting. The education intervention group will receive an education package that encourages reduction in sitting behaviors. The sit-stand desk intervention group will receive the same education package along with an adjustable sit-stand desk. Participants will be included in the study if they are currently employed in a full-time academic or administrative role that involves greater than 15 hours per week or greater than 4 hours per day computer-based work. Baseline data will include participant's age, gender, weight, height, smoking habit, employment position, level of education, and baseline self-reported leisure time physical activity. The primary outcome is the average daily sedentary time during work hours, measured by an accelerometer. Participant recruitment commenced in March 2013 and will be completed by December 2013. This study will determine whether providing office workers with an adjustable sit-stand desk and individually targeted education, or education alone, is more effective in decreasing sitting behaviors than no intervention. Australian New Zealand Clinical Trials Registry: ACTRN12613000366752.

Design standards. Cutting the costs you don't see.

PubMed

Jolley, K

1995-07-01

In an era of hospital cost cutting and reengineering at all levels, it is still important to implement interior design standards in planning, selecting, and arranging the products that affect hospital image and function. Design standards manuals include manufacturer and model of furniture, fixtures, and equipment from desks, chairs, and computer stands to window treatments. This article reviews how to save on interior design costs while keeping a professional healthcare image.

An Examination of the Career, Salary and Training Expectations of Information Technology Professionals Working in the Help Desk Field

ERIC Educational Resources Information Center

Flynn, William C.

2013-01-01

The Information Technology (IT) help desk positions serve as the gateway between the IT department and users. Although IT is one of the most employable job categories, and crucial for business, staffing these positions with properly trained and certified IT personnel and retaining them is a major challenge for IT help desk managers. What are the…

Effects of portable computing devices on posture, muscle activation levels and efficiency.

PubMed

Werth, Abigail; Babski-Reeves, Kari

2014-11-01

Very little research exists on ergonomic exposures when using portable computing devices. This study quantified muscle activity (forearm and neck), posture (wrist, forearm and neck), and performance (gross typing speed and error rates) differences across three portable computing devices (laptop, netbook, and slate computer) and two work settings (desk and computer) during data entry tasks. Twelve participants completed test sessions on a single computer using a test-rest-test protocol (30min of work at one work setting, 15min of rest, 30min of work at the other work setting). The slate computer resulted in significantly more non-neutral wrist, elbow and neck postures, particularly when working on the sofa. Performance on the slate computer was four times less than that of the other computers, though lower muscle activity levels were also found. Potential or injury or illness may be elevated when working on smaller, portable computers in non-traditional work settings. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Surprise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curran, L.

1988-03-03

Interest has been building in recent months over the imminent arrival of a new class of supercomputer, called the ''supercomputer on a desk'' or the single-user model. Most observers expected the first such product to come from either of two startups, Ardent Computer Corp. or Stellar Computer Inc. But a surprise entry has shown up. Apollo Computer Inc. is launching a new work station this week that racks up an impressive list of industry first as it puts supercomputer power at the disposal of a single user. The new series 10000 from the Chelmsford, Mass., a company is built aroundmore » a reduced-instruction-set architecture that the company calls Prism, for parallel reduced-instruction-set multiprocessor. This article describes the 10000 and Prism.« less

"Thinking on your feet": A qualitative evaluation of sit-stand desks in an Australian workplace.

PubMed

Grunseit, Anne Carolyn; Chau, Josephine Yuk-Yin; van der Ploeg, Hidde Pieter; Bauman, Adrian

2013-04-18

Epidemiological research has established sitting as a new risk factor for the development of non-communicable chronic disease. Sit-stand desks have been proposed as one strategy to reduce occupational sedentary time. This formative research study evaluated the acceptability and usability of manually and electrically operated sit-stand desks in a medium-sized government organisation located in Sydney, Australia. Sitting time pre- and three months post -installation of the sit-stand desks was measured using validated self-report measures. Additionally, three group interviews and one key-informant interview were conducted with staff regarding perceptions about ease of, and barriers to, use and satisfaction with the sit-stand desks. All interviews were recorded, transcribed and analysed for themes regarding usability and acceptability. Of 31 staff, 18 completed baseline questionnaires, and 13 completed follow-up questionnaires. The median proportion of sitting time for work was 85% (range 50%-95%) at baseline and 60% (range 10%-95%) at follow-up. Formal statistical testing of paired data (n=11) showed that the change from baseline to follow-up in time spent sitting (mean change=1.7 hours, p=.014) was statistically significant. From the qualitative data, reasons given for initiating use of the desks in the standing position were the potential health benefits, or a willingness to experiment or through external prompting. Factors influencing continued use included: concern for, and experience of, short and long term health impacts; perceived productivity whilst sitting and standing; practical accommodation of transitions between sitting and standing; electric or manual operation height adjustment. Several trajectories in patterns of initiation and continued use were identified that centered on the source and timing of commitment to using the desk in the standing position. Sit-stand desks had high usability and acceptability and reduced sitting time at work. Use could be promoted by emphasizing the health benefits, providing guidance on appropriate set-up and normalizing standing for work-related tasks.

“Thinking on your feet”: A qualitative evaluation of sit-stand desks in an Australian workplace

PubMed Central

2013-01-01

Background Epidemiological research has established sitting as a new risk factor for the development of non-communicable chronic disease. Sit-stand desks have been proposed as one strategy to reduce occupational sedentary time. This formative research study evaluated the acceptability and usability of manually and electrically operated sit-stand desks in a medium-sized government organisation located in Sydney, Australia. Methods Sitting time pre- and three months post -installation of the sit-stand desks was measured using validated self-report measures. Additionally, three group interviews and one key-informant interview were conducted with staff regarding perceptions about ease of, and barriers to, use and satisfaction with the sit-stand desks. All interviews were recorded, transcribed and analysed for themes regarding usability and acceptability. Results Of 31 staff, 18 completed baseline questionnaires, and 13 completed follow-up questionnaires. The median proportion of sitting time for work was 85% (range 50%-95%) at baseline and 60% (range 10%-95%) at follow-up. Formal statistical testing of paired data (n=11) showed that the change from baseline to follow-up in time spent sitting (mean change=1.7 hours, p=.014) was statistically significant. From the qualitative data, reasons given for initiating use of the desks in the standing position were the potential health benefits, or a willingness to experiment or through external prompting. Factors influencing continued use included: concern for, and experience of, short and long term health impacts; perceived productivity whilst sitting and standing; practical accommodation of transitions between sitting and standing; electric or manual operation height adjustment. Several trajectories in patterns of initiation and continued use were identified that centered on the source and timing of commitment to using the desk in the standing position. Conclusions Sit-stand desks had high usability and acceptability and reduced sitting time at work. Use could be promoted by emphasizing the health benefits, providing guidance on appropriate set-up and normalizing standing for work-related tasks. PMID:23597291

Sudden death caused by 1,1-difluoroethane inhalation.

PubMed

Xiong, Zhenggang; Avella, Joseph; Wetli, Charles V

2004-05-01

A 20-year-old man was found dead on the floor next to a computer, with a nearly full can of "CRC Duster" dust remover located next to the deceased on the floor, and an empty can of the same product on the computer desk. Toxicologic evaluation using either gas chromatography/mass spectrometry (GC/MS) or gas chromatography/flame ionization detector (GC/FID) method identified the active ingredient 1,1-difluoroethane (Freon 152a) in all tissues analyzed. Tissue distribution studies revealed highest concentration in central blood, lung, and liver. It is believed that the 1,1-difluoroethane inhalation was the cause of death.

Real-Time 3D Ultrasound for Physiological Monitoring 22258.

DTIC Science & Technology

1999-10-01

their software to acquire positioning information using a high precision mechanical arm ( MicroScribe arm from Immersion Corp., San Jose, CA) instead of...mechanical arm (Immersion MicroScribe ™) for 3D data acquisition, also adopted by EchoTech for 3D FreeScan. • Medical quality video capture by a...MHz Dell Dimen- sion XPS computer9 (under desk), MUSTPAC-2 Vir- tual Ultrasound Probe based on the Microscribe 3D articulated arm10 (on table

Design requirements for ubiquitous computing environments for healthcare professionals.

PubMed

Bång, Magnus; Larsson, Anders; Eriksson, Henrik

2004-01-01

Ubiquitous computing environments can support clinical administrative routines in new ways. The aim of such computing approaches is to enhance routine physical work, thus it is important to identify specific design requirements. We studied healthcare professionals in an emergency room and developed the computer-augmented environment NOSTOS to support teamwork in that setting. NOSTOS uses digital pens and paper-based media as the primary input interface for data capture and as a means of controlling the system. NOSTOS also includes a digital desk, walk-up displays, and sensor technology that allow the system to track documents and activities in the workplace. We propose a set of requirements and discuss the value of tangible user interfaces for healthcare personnel. Our results suggest that the key requirements are flexibility in terms of system usage and seamless integration between digital and physical components. We also discuss how ubiquitous computing approaches like NOSTOS can be beneficial in the medical workplace.

Analyzing musculoskeletal system discomforts and risk factors in computer-using office workers.

PubMed

Ardahan, Melek; Simsek, Hatice

2016-01-01

This study analyzed the prevalence of work-related computer-user musculoskeletal discomforts, personal and computer-related risk factors. A cross-sectional survey on 395 office workers was made between July-September 2015. Musculoskeletal symptoms and risk factors were evaluated for participants' demographics and job attributes on the 21-item questionnaire and the Turkish-Cornell Musculoskeletal Discomfort Questionnaire. Participants reported musculoskeletal symptoms in the neck (67.85%), back (66.33%), lower back (59.49%), right shoulder (45.32%) and left shoulder (43.54%) during the past week and work interference was 33.6%, 28.5%, 30.6%, 31.3% and 31.9%, respectively. Musculoskeletal discomfort risks were being male, increasing daily computer usage, feeling computer-usage discomfort, hours working at desk and having knowledge about ergonomic exercises. Musculoskeletal symptoms are common in Turkish office workers and indicated the need for more attention to musculoskeletal disorders and designing effective preventive interventions.

Clearing your Desk! Software and Data Services for Collaborative Web Based GIS Analysis

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Idaszak, R.; Horsburgh, J. S.; Ames, D. P.; Goodall, J. L.; Band, L. E.; Merwade, V.; Couch, A.; Hooper, R. P.; Maidment, D. R.; Dash, P. K.; Stealey, M.; Yi, H.; Gan, T.; Gichamo, T.; Yildirim, A. A.; Liu, Y.

2015-12-01

Can your desktop computer crunch the large GIS datasets that are becoming increasingly common across the geosciences? Do you have access to or the know-how to take advantage of advanced high performance computing (HPC) capability? Web based cyberinfrastructure takes work off your desk or laptop computer and onto infrastructure or "cloud" based data and processing servers. This talk will describe the HydroShare collaborative environment and web based services being developed to support the sharing and processing of hydrologic data and models. HydroShare supports the upload, storage, and sharing of a broad class of hydrologic data including time series, geographic features and raster datasets, multidimensional space-time data, and other structured collections of data. Web service tools and a Python client library provide researchers with access to HPC resources without requiring them to become HPC experts. This reduces the time and effort spent in finding and organizing the data required to prepare the inputs for hydrologic models and facilitates the management of online data and execution of models on HPC systems. This presentation will illustrate the use of web based data and computation services from both the browser and desktop client software. These web-based services implement the Terrain Analysis Using Digital Elevation Model (TauDEM) tools for watershed delineation, generation of hydrology-based terrain information, and preparation of hydrologic model inputs. They allow users to develop scripts on their desktop computer that call analytical functions that are executed completely in the cloud, on HPC resources using input datasets stored in the cloud, without installing specialized software, learning how to use HPC, or transferring large datasets back to the user's desktop. These cases serve as examples for how this approach can be extended to other models to enhance the use of web and data services in the geosciences.

The position of a standard optical computer mouse affects cardiorespiratory responses during the operation of a computer under time constraints.

PubMed

Sako, Shunji; Sugiura, Hiromichi; Tanoue, Hironori; Kojima, Makoto; Kono, Mitsunobu; Inaba, Ryoichi

2014-08-01

This study investigated the association between task-induced stress and fatigue by examining the cardiovascular responses of subjects using different mouse positions while operating a computer under time constraints. The study was participated by 16 young, healthy men and examined the use of optical mouse devices affixed to laptop computers. Two mouse positions were investigated: (1) the distal position (DP), in which the subjects place their forearms on the desk accompanied by the abduction and flexion of their shoulder joints, and (2) the proximal position (PP), in which the subjects place only their wrists on the desk without using an armrest. The subjects continued each task for 16 min. We assessed differences in several characteristics according to mouse position, including expired gas values, autonomic nerve activities (based on cardiorespiratory responses), operating efficiencies (based on word counts), and fatigue levels (based on the visual analog scale - VAS). Oxygen consumption (VO(2)), the ratio of inspiration time to respiration time (T(i)/T(total)), respiratory rate (RR), minute ventilation (VE), and the ratio of expiration to inspiration (Te/T(i)) were significantly lower when the participants were performing the task in the DP than those obtained in the PP. Tidal volume (VT), carbon dioxide output rates (VCO(2)/VE), and oxygen extraction fractions (VO(2)/VE) were significantly higher for the DP than they were for the PP. No significant difference in VAS was observed between the positions; however, as the task progressed, autonomic nerve activities were lower and operating efficiencies were significantly higher for the DP than they were for the PP. Our results suggest that the DP has fewer effects on cardiorespiratory functions, causes lower levels of sympathetic nerve activity and mental stress, and produces a higher total workload than the PP. This suggests that the DP is preferable to the PP when operating a computer.

Impact of sit-stand desks at work on energy expenditure and sedentary time: protocol for a feasibility study.

PubMed

Mantzari, Eleni; Wijndaele, Katrien; Brage, Soren; Griffin, Simon J; Marteau, Theresa M

2016-01-01

Prolonged sitting, an independent risk factor for disease development and premature mortality, is increasing in prevalence in high- and middle-income countries, with no signs of abating. Adults in such countries spend the largest proportion of their day in sedentary behaviour, most of which is accumulated at work. One promising method for reducing workplace sitting is the use of sit-stand desks. However, key uncertainties remain about this intervention, related to the quality of existing studies and a lack of focus on key outcomes, including energy expenditure. We are planning a randomised controlled trial to assess the impact of sit-stand desks at work on energy expenditure and sitting time in the short and longer term. To reduce the uncertainties related to the design of this trial, we propose a preliminary study to assess the feasibility and acceptability of the recruitment, allocation, measurement, retention and intervention procedures. Five hundred office-based employees from two companies in Cambridge, UK, will complete a survey to assess their interest in participating in a trial on the use of sit-stand desks at work. The workspaces of 100 of those interested in participating will be assessed for sit-stand desk installation suitability, and 20 participants will be randomised to either the use of sit-stand desks at work for 3 months or a waiting list control group. Energy expenditure and sitting time, measured via Actiheart and activPAL monitors, respectively, as well as cardio-metabolic and anthropometric outcomes and other outcomes relating to health and work performance, will be assessed in 10 randomly selected participants. All participants will also be interviewed about their experience of using the desks and participating in the study. The findings are expected to inform the design of a trial assessing the impact of sit-stand desks at work on short and longer term workplace sitting, taking into account their impact on energy expenditure and the extent to which their use has compensation effects outside the workplace. The findings from such a trial are expected to inform discussions regarding the potential of sit-stand desks at work to alleviate the harm to cardio-metabolic health arising from prolonged sitting. ISRCTN44827407.

New generation of 3D desktop computer interfaces

NASA Astrophysics Data System (ADS)

Skerjanc, Robert; Pastoor, Siegmund

1997-05-01

Today's computer interfaces use 2-D displays showing windows, icons and menus and support mouse interactions for handling programs and data files. The interface metaphor is that of a writing desk with (partly) overlapping sheets of documents placed on its top. Recent advances in the development of 3-D display technology give the opportunity to take the interface concept a radical stage further by breaking the design limits of the desktop metaphor. The major advantage of the envisioned 'application space' is, that it offers an additional, immediately perceptible dimension to clearly and constantly visualize the structure and current state of interrelations between documents, videos, application programs and networked systems. In this context, we describe the development of a visual operating system (VOS). Under VOS, applications appear as objects in 3-D space. Users can (graphically connect selected objects to enable communication between the respective applications. VOS includes a general concept of visual and object oriented programming for tasks ranging from, e.g., low-level programming up to high-level application configuration. In order to enable practical operation in an office or at home for many hours, the system should be very comfortable to use. Since typical 3-D equipment used, e.g., in virtual-reality applications (head-mounted displays, data gloves) is rather cumbersome and straining, we suggest to use off-head displays and contact-free interaction techniques. In this article, we introduce an autostereoscopic 3-D display and connected video based interaction techniques which allow viewpoint-depending imaging (by head tracking) and visually controlled modification of data objects and links (by gaze tracking, e.g., to pick, 3-D objects just by looking at them).

Numerical modeling of fluid and electrical currents through geometries based on synchrotron X-ray tomographic images of reservoir rocks using Avizo and COMSOL

NASA Astrophysics Data System (ADS)

Bird, M. B.; Butler, S. L.; Hawkes, C. D.; Kotzer, T.

2014-12-01

The use of numerical simulations to model physical processes occurring within subvolumes of rock samples that have been characterized using advanced 3D imaging techniques is becoming increasingly common. Not only do these simulations allow for the determination of macroscopic properties like hydraulic permeability and electrical formation factor, but they also allow the user to visualize processes taking place at the pore scale and they allow for multiple different processes to be simulated on the same geometry. Most efforts to date have used specialized research software for the purpose of simulations. In this contribution, we outline the steps taken to use commercial software Avizo to transform a 3D synchrotron X-ray-derived tomographic image of a rock core sample to an STL (STereoLithography) file which can be imported into the commercial multiphysics modeling package COMSOL. We demonstrate that the use of COMSOL to perform fluid and electrical current flow simulations through the pore spaces. The permeability and electrical formation factor of the sample are calculated and compared with laboratory-derived values and benchmark calculations. Although the simulation domains that we were able to model on a desk top computer were significantly smaller than representative elementary volumes, and we were able to establish Kozeny-Carman and Archie's Law trends on which laboratory measurements and previous benchmark solutions fall. The rock core samples include a Fountainebleau sandstone used for benchmarking and a marly dolostone sampled from a well in the Weyburn oil field of southeastern Saskatchewan, Canada. Such carbonates are known to have complicated pore structures compared with sandstones, yet we are able to calculate reasonable macroscopic properties. We discuss the computing resources required.

NASA Virtual Glovebox (VBX): Emerging Simulation Technology for Space Station Experiment Design, Development, Training and Troubleshooting

NASA Technical Reports Server (NTRS)

Smith, Jeffrey D.; Twombly, I. Alexander; Maese, A. Christopher; Cagle, Yvonne; Boyle, Richard

2003-01-01

The International Space Station demonstrates the greatest capabilities of human ingenuity, international cooperation and technology development. The complexity of this space structure is unprecedented; and training astronaut crews to maintain all its systems, as well as perform a multitude of research experiments, requires the most advanced training tools and techniques. Computer simulation and virtual environments are currently used by astronauts to train for robotic arm manipulations and extravehicular activities; but now, with the latest computer technologies and recent successes in areas of medical simulation, the capability exists to train astronauts for more hands-on research tasks using immersive virtual environments. We have developed a new technology, the Virtual Glovebox (VGX), for simulation of experimental tasks that astronauts will perform aboard the Space Station. The VGX may also be used by crew support teams for design of experiments, testing equipment integration capability and optimizing the procedures astronauts will use. This is done through the 3D, desk-top sized, reach-in virtual environment that can simulate the microgravity environment in space. Additional features of the VGX allow for networking multiple users over the internet and operation of tele-robotic devices through an intuitive user interface. Although the system was developed for astronaut training and assisting support crews, Earth-bound applications, many emphasizing homeland security, have also been identified. Examples include training experts to handle hazardous biological and/or chemical agents in a safe simulation, operation of tele-robotic systems for assessing and diffusing threats such as bombs, and providing remote medical assistance to field personnel through a collaborative virtual environment. Thus, the emerging VGX simulation technology, while developed for space- based applications, can serve a dual use facilitating homeland security here on Earth.

The Evaluation of the Impact of a Stand-Biased Desk on Energy Expenditure and Physical Activity for Elementary School Students

PubMed Central

Benden, Mark E.; Zhao, Hongwei; Jeffrey, Christina E.; Wendel, Monica L.; Blake, Jamilia J.

2014-01-01

Due to the increasing prevalence of childhood obesity, the association between classroom furniture and energy expenditure as well as physical activity was examined using a standing-desk intervention in three central-Texas elementary schools. Of the 480 students in the 24 classrooms randomly assigned to either a seated or stand-biased desk equipped classroom, 374 agreed to participate in a week-long data collection during the fall and spring semesters. Each participant’s data was collected using Sensewear® armbands and was comprised of measures of energy expenditure (EE) and step count. A hierarchical linear mixed effects model showed that children in seated desk classrooms had significantly lower (EE) and fewer steps during the standardized lecture time than children in stand-biased classrooms after adjusting for grade, race, and gender. The use of a standing desk showed a significant higher mean energy expenditure by 0.16 kcal/min (p < 0.0001) in the fall semester, and a higher EE by 0.08 kcal/min (p = 0.0092) in the spring semester. PMID:25211776

Conducting a desk review to inform the mental health and psychosocial support response to the 2016 Ecuador earthquake

PubMed Central

Troya, M. Isabela; Greene, M. Claire; Santos, Clara Gesteira; Shultz, James M.

2016-01-01

ABSTRACT Following the 7.8 magnitude earthquake that struck Ecuador on 16 April 2016, multiple salient public health concerns were raised, including the need to provide mental health and psychosocial support for individual survivors and their communities. The World Health Organization and the United Nations High Commissioner for Refugees recommend conducting a desk review to summarize existing information, specific to the affected communities, that will support timely, culturally-attuned assessment and delivery of mental health and psychosocial support shortly after the onset of a disaster or humanitarian emergency. The desk review is one component of a comprehensive toolkit designed to inform and support humanitarian actors and their responders in the field. This commentary provides a case example of the development of a desk review that was used to inform personnel responding to the 2016 earthquake in Ecuador. The desk review process is described in addition to several innovations that were introduced to the process during this iteration. Strengths and limitations are discussed, as well as lessons learned and recommendations for future applications. PMID:28265485

Ergonomics in the computer workstation.

PubMed

Karoney, M J; Mburu, S K; Ndegwa, D W; Nyaichowa, A G; Odera, E B

2010-09-01

Awareness of effects of long term use of computer and application of ergonomics in the computer workstation is important for preventing musculoskeletal disorders, eyestrain and psychosocial effects. To determine the awareness of physical and psychological effects of prolonged computer usage and application of ergonomicsin the workstation. One hundred and eighty one people were interviewed from tertiary educational institutions, telecommunications and media houses within Nairobi, Kenya. Descriptive cross sectional study. Majority (89.8%) of the respondents felt that prolonged computer use had an adverse effect on their health, with only 12.4% having received formal training on the same. Assessment of their workstations revealed the most applied ergonomic measure as feet placement on the floor: 100% (181) followed by correct monitor placement with 94.4% (171) fulfilling the requirements. The least applied ergonomic measures were non reflecting wall paint: 5% (9) and adjustable desk 9.9% (18). There is awareness among computer users on the effects of prolonged computer use but there is limited application of ergonomic measures.

Let's Get Small: An Introduction to Transitional Issues in Nanotech and Intellectual Property.

PubMed

Koepsell, David

2009-08-01

Much of the discussion regarding nanotechnology centers around perceived and prosphesied harms and risks. While there are real risks that could emerge from futuristic nanotechnology, there are other current risks involved with its development, not involving physical harms, that could prevent its full promise from being realized. Transitional forms of the technology, involving "microfab," or localized, sometimes desk-top, manufacture, pose a good opportunity for case study. How can we develop legal and regulatory institutions, specifically centered around the problems of intellectual property, that both stimulate innovation, and make the best possible use of what will eventually be a market in "types" rather than "tokens"? This paper argues that this is the most critical, current issues facing nanotechnology, and suggests a manner to approach it.

A system architecture for an advanced Canadian wideband mobile satellite system

NASA Technical Reports Server (NTRS)

Takats, P.; Keelty, M.; Moody, H.

1993-01-01

In this paper, the system architecture for an advanced Canadian ka-band geostationary mobile satellite system is described, utilizing hopping spot beams to support a 256 kbps wideband service for both N-ISDN and packet-switched interconnectivity to small briefcase-size portable and mobile terminals. An assessment is given of the technical feasibility of the satellite payload and terminal design in the post year 2000 timeframe. The satellite payload includes regeneration and on-board switching to permit single hop interconnectivity between mobile terminals. The mobile terminal requires antenna tracking and platform stabilization to ensure acquisition of the satellite signal. The potential user applications targeted for this wideband service includes: home-office, multimedia, desk-top (PC) videoconferencing, digital audio broadcasting, single and multi-user personal communications.

Temperature correction of arterial blood-gas parameters: A comparative review of methodology.

PubMed

Andritsch, R F; Muravchick, S; Gold, M I

1981-09-01

The need for accurate clinical diagnosis and appropriate intervention requires that a modern blood-gas laboratory have the means to correct for significant discrepancies between patient temperature and the temperature at which in vitro blood samples are analyzed. Recent advances in mini- and microcomputer technology permit application of any or all of the correction formulas above at modest cost and minimal inconvenience (See the Appendix). An expanded program for a TI-59 desk-top calculator and P-100C printer which gives labeled hard-copy readout of temperature-corrected pH, PCO2, PO2, and hemoglobin saturation values, as well as bicarbonate concentration and in vivo base excess is in daily clinical use in our operating room and is available from the authors upon request.

A stand-alone compact EUV microscope based on gas-puff target source.

PubMed

Torrisi, Alfio; Wachulak, Przemyslaw; Węgrzyński, Łukasz; Fok, Tomasz; Bartnik, Andrzej; Parkman, Tomáš; Vondrová, Šárka; Turňová, Jana; Jankiewicz, Bartłomiej J; Bartosewicz, Bartosz; Fiedorowicz, Henryk

2017-02-01

We report on a very compact desk-top transmission extreme ultraviolet (EUV) microscope based on a laser-plasma source with a double stream gas-puff target, capable of acquiring magnified images of objects with a spatial (half-pitch) resolution of sub-50 nm. A multilayer ellipsoidal condenser is used to focus and spectrally narrow the radiation from the plasma, producing a quasi-monochromatic EUV radiation (λ = 13.8 nm) illuminating the object, whereas a Fresnel zone plate objective forms the image. Design details, development, characterization and optimization of the EUV source and the microscope are described and discussed. Test object and other samples were imaged to demonstrate superior resolution compared to visible light microscopy. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

From the desk of the Editor in Chief

NASA Astrophysics Data System (ADS)

2018-02-01

The guiding principle of Life Sciences in Space Research is to provide a forum for the rapid exchange of scientific information among members of the space life sciences community and to produce the top journal in our field. With the publication of Volume 16, the journal has reached a milestone with publication of the 150th article since its inception in April 2014. The policy of the editorial board is to publish quality papers and review articles that would appeal to our readers and in a timely manner. Overall growth of the journal has been excellent. The total number of journal articles accessed online on ScienceDirect for the past four years has continued to grow and several of our recently published articles have appeared in the lay press.

Evidence-based guidelines for the wise use of computers by children: physical development guidelines.

PubMed

Straker, L; Maslen, B; Burgess-Limerick, R; Johnson, P; Dennerlein, J

2010-04-01

Computer use by children is common and there is concern over the potential impact of this exposure on child physical development. Recently principles for child-specific evidence-based guidelines for wise use of computers have been published and these included one concerning the facilitation of appropriate physical development. This paper reviews the evidence and presents detailed guidelines for this principle. The guidelines include encouraging a mix of sedentary and whole body movement tasks, encouraging reasonable postures during computing tasks through workstation, chair, desk, display and input device selection and adjustment and special issues regarding notebook computer use and carriage, computing skills and responding to discomfort. The evidence limitations highlight opportunities for future research. The guidelines themselves can inform parents and teachers, equipment designers and suppliers and form the basis of content for teaching children the wise use of computers. STATEMENT OF RELEVANCE: Many children use computers and computer-use habits formed in childhood may track into adulthood. Therefore child-computer interaction needs to be carefully managed. These guidelines inform those responsible for children to assist in the wise use of computers.

Measuring the effectiveness of scientific gatekeeping.

PubMed

Siler, Kyle; Lee, Kirby; Bero, Lisa

2015-01-13

Peer review is the main institution responsible for the evaluation and gestation of scientific research. Although peer review is widely seen as vital to scientific evaluation, anecdotal evidence abounds of gatekeeping mistakes in leading journals, such as rejecting seminal contributions or accepting mediocre submissions. Systematic evidence regarding the effectiveness--or lack thereof--of scientific gatekeeping is scant, largely because access to rejected manuscripts from journals is rarely available. Using a dataset of 1,008 manuscripts submitted to three elite medical journals, we show differences in citation outcomes for articles that received different appraisals from editors and peer reviewers. Among rejected articles, desk-rejected manuscripts, deemed as unworthy of peer review by editors, received fewer citations than those sent for peer review. Among both rejected and accepted articles, manuscripts with lower scores from peer reviewers received relatively fewer citations when they were eventually published. However, hindsight reveals numerous questionable gatekeeping decisions. Of the 808 eventually published articles in our dataset, our three focal journals rejected many highly cited manuscripts, including the 14 most popular; roughly the top 2 percent. Of those 14 articles, 12 were desk-rejected. This finding raises concerns regarding whether peer review is ill--suited to recognize and gestate the most impactful ideas and research. Despite this finding, results show that in our case studies, on the whole, there was value added in peer review. Editors and peer reviewers generally--but not always-made good decisions regarding the identification and promotion of quality in scientific manuscripts.

A comparative study of three different kinds of school furniture.

PubMed

Aagaard, Jens; Storr-Paulsen, Annette

1995-05-01

Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

3. Main Control Switchboard (front), view to the southwest, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Main Control Switchboard (front), view to the southwest, with item 1 (the synchronization monitor) on the far left of the photograph and item 14 (the Libby transmission line panel) on the far right of the photograph. The operator's desk, with telephone and computer monitors, is also visible in left foreground of the photograph. - Washington Water Power Clark Fork River Noxon Rapids Hydroelectric Development, Powerhouse, South bank of Clark Fork River at Noxon Rapids, Noxon, Sanders County, MT

Microcomputer Scheduling of Reference Desk Staff.

ERIC Educational Resources Information Center

Cornick, Donna; Owen, Willy

1988-01-01

Presents a model that can accommodate staff preferences when determining a reference desk schedule using a microcomputer, the Lotus 1-2-3 spreadsheet software, and the linear programing software LP83. (eight references) (MES)

Manual Chapters

Science.gov Websites

question, problem or suggestion please open a Service Desk Ticket. Fermilab Home Page ESH&Q Home Page open a Service Desk Ticket. Fermilab Home Page ESH&Q Home Page Fermilab At Work Security, Privacy

Interior detail of platform in main hall, with desk, flag, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior detail of platform in main hall, with desk, flag, and banners, facing south - International Longshoremen's & Warehousemen's Union Hall, Naval Civil Engineering Laboratory, Port Hueneme Road, Port Hueneme, Ventura County, CA

Standing Up for Learning: A Pilot Investigation on the Neurocognitive Benefits of Stand-Biased School Desks

PubMed Central

Mehta, Ranjana K.; Shortz, Ashley E.; Benden, Mark E.

2015-01-01

Standing desks have proven to be effective and viable solutions to combat sedentary behavior among children during the school day in studies around the world. However, little is known regarding the potential of such interventions on cognitive outcomes in children over time. The purpose of this pilot study was to determine the neurocognitive benefits, i.e., improvements in executive functioning and working memory, of stand-biased desks and explore any associated changes in frontal brain function. 34 freshman high school students were recruited for neurocognitive testing at two time points during the school year: (1) in the fall semester and (2) in the spring semester (after 27.57 (1.63) weeks of continued exposure). Executive function and working memory was evaluated using a computerized neurocognitive test battery, and brain activation patterns of the prefrontal cortex were obtained using functional near infrared spectroscopy. Continued utilization of the stand-biased desks was associated with significant improvements in executive function and working memory capabilities. Changes in corresponding brain activation patterns were also observed. These findings provide the first preliminary evidence on the neurocognitive benefits of standing desks, which to date have focused largely on energy expenditure. Findings obtained here can drive future research with larger samples and multiple schools, with comparison groups that may in turn implicate the importance of stand-biased desks, as simple environmental changes in classrooms, on enhancing children’s cognitive functioning that drive their cognitive development and impact educational outcomes. PMID:26703700

Notification: Audit of EPA Customer Service Help Desks, Hotlines, and Clearinghouses

EPA Pesticide Factsheets

Project #OA-FY12-0570, July 12, 2012. The EPA Office of Inspector General (OIG) plans to begin preliminary research on EPA’s customer service help desks, hotlines, and clearinghouses (contact centers).

78 FR 77615 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... information identified in this proposed AD, contact Bombardier, Inc., Q-Series Technical Help Desk, 123... Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax...

Measuring Circulation Desk Activities Using a Random Alarm Mechanism.

ERIC Educational Resources Information Center

Mosborg, Stella Frank

1980-01-01

Reports a job analysis methodology to gather meaningful data related to circulation desk activity. The technique is designed to give librarians statistical data on actual time expenditures for complex and varying activities. (Author/RAA)

Influence of input device, work surface angle, and task on spine kinematics.

PubMed

Riddell, Maureen F; Gallagher, Kaitlin M; McKinnon, Colin D; Callaghan, Jack P

2016-01-01

With the increase of tablet usage in both office and industrial workplaces, it is critical to investigate the influence of tablet usage on spine posture and movement. To quantify spine kinematics while participants interacted with a tablet or desktop computer. Fourteen participants volunteered for this study. Marker clusters were fixed onto body regions to analyze cervical and lumbar spine posture and sampled at 32 Hz (Optotrak Certus, NDI, Waterloo, Canada). Participants sat for one hour in total. Cervical and lumbar median angles and range of motion (10th to 90th % ile angles) were extracted from amplitude probability distribution functions performed on the angle data. Using a sloped desk surface at 15°, compared to a flat desk, influenced cervical flexion (p = 0.0228). Completing the form fill task resulted in the highest degree of cervical flexion (p = 0.0008) compared to the other tasks completed with cervical angles between 6.1°-8.5° higher than emailing and reading respectively. An interaction between device and task (p = 0.0061) was found for relative lumbar median spine angles. Increased lumbar flexion was recorded when using a computer versus a tablet to complete various tasks. Task influenced both cervical and lumbar spine posture with the highest cervical flexion occurring while completing a simulated data entry task. A work surface slope of 15° decreased cervical spine flexion compared to a horizontal work surface slope.

The 3D scanner prototype utilize object profile imaging using line laser and octave software

NASA Astrophysics Data System (ADS)

Nurdini, Mugi; Manunggal, Trikarsa Tirtadwipa; Samsi, Agus

2016-11-01

Three-dimensional scanner or 3D Scanner is a device to reconstruct the real object into digital form on a computer. 3D Scanner is a technology that is being developed, especially in developed countries, where the current 3D Scanner devices is the advanced version with a very expensive prices. This study is basically a simple prototype of 3D Scanner with a very low investment costs. 3D Scanner prototype device consists of a webcam, a rotating desk system controlled by a stepper motor and Arduino UNO, and a line laser. Objects that limit the research is the object with same radius from its center point (object pivot). Scanning is performed by using object profile imaging by line laser which is then captured by the camera and processed by a computer (image processing) using Octave software. On each image acquisition, the scanned object on a rotating desk rotated by a certain degree, so for one full turn multiple images of a number of existing side are finally obtained. Then, the profile of the entire images is extracted in order to obtain digital object dimension. Digital dimension is calibrated by length standard, called gage block. Overall dimensions are then digitally reconstructed into a three-dimensional object. Validation of the scanned object reconstruction of the original object dimensions expressed as a percentage error. Based on the results of data validation, horizontal dimension error is about 5% to 23% and vertical dimension error is about +/- 3%.

Usage of Sit-Stand Workstations and Associations Between Work and Nonwork Sitting Time: An Observational Study.

PubMed

Mazzotta, Michael A; Ferrar, Katia; Fraysse, Francois; Lewis, Lucy K; McEvoy, Maureen

2018-05-01

No studies have objectively measured habitual usage of sit-stand workstations. Eighteen full-time office workers participated (47.9 ± 9.2 years, 61% female). Sitting time was objectively measured (activPAL, 24 h/7 days), and time at desk, desk position, and perceptions of desk use were self-reported. Participants sat for 39% of their daily workstation time, and changed workstation position twice daily. The most common reasons for standing included back pain (44%) and tiredness (22%). The majority of participants received no workstation occupational health (72%) or educational (61%) information. Workstation standing time had a significant moderate correlation with total daily standing time (P = 0.02). Office workers with sit-stand workstations rarely change desk position, and there is no relationship between the time spent sitting at the workstation, and total daily sitting time. Education about the workstations was limited.

Bike Desks in the Office: Physical Health, Cognitive Function, Work Engagement, and Work Performance.

PubMed

Torbeyns, Tine; de Geus, Bas; Bailey, Stephen; De Pauw, Kevin; Decroix, Lieselot; Van Cutsem, Jeroen; Meeusen, Romain

2016-12-01

The aim of this study was to examine the longitudinal effect of implementing bike desks in an office setting on physical health, cognition, and work parameters. Physical health, cognitive function, work engagement, and work performance measured before (T0) and after (T2) the intervention period were compared between office workers who used the bike desk (IG, n = 22) and those who did not (CG, n = 16). The IG cycled approximately 98 minutes/week. The IG showed a significantly lower fat percentage and a trend toward a higher work engagement at T2 relative to T0, while this was not different for the CG. No effects on other parameters of health, cognition, or work performance were found. Providing bike desks in the office positively influences employees' fat percentage and could positively influence work engagement without compromising work performance.

Classroom Standing Desks and Sedentary Behavior: A Systematic Review.

PubMed

Minges, Karl E; Chao, Ariana M; Irwin, Melinda L; Owen, Neville; Park, Chorong; Whittemore, Robin; Salmon, Jo

2016-02-01

Reducing sedentary behaviors, or time spent sitting, is an important target for health promotion in children. Standing desks in schools may be a feasible, modifiable, and acceptable environmental strategy to this end. To examine the impact of school-based standing desk interventions on sedentary behavior and physical activity, health-related outcomes, and academic and behavioral outcomes in school-aged children. Ovid Embase, Medline, PsycINFO, Web of Science, Global Health, and CINAHL. Full-text peer-reviewed journal publications written in English; samples of school-aged youth (5-18 years of age); study designs including the same participants at baseline and follow-up; and use of a standing desk as a component of the intervention. Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Eight studies satisfied selection criteria and used quasi-experimental (n = 4), randomized controlled trial (n = 3), and pre-post, no control (n = 1) designs. When examined, time spent standing increased in all studies (effect sizes: 0.38-0.71), while sitting time decreased from a range of 59 to 64 minutes (effect sizes: 0.27-0.49). Some studies reported increased physical activity and energy expenditure and improved classroom behavior. One-half of the studies had nonrandomized designs, and most were pilot or feasibility studies. This initial evidence supports integrating standing desks into the classroom environment; this strategy has the potential to reduce sitting time and increase standing time among elementary schoolchildren. Additional research is needed to determine the impact of standing desks on academic performance and precursors of chronic disease risk. Copyright © 2016 by the American Academy of Pediatrics.

31. SAR2, INTERIOR SHOWING SWITCHBOARD, OPERATOR'S DESK, AND TRANSFORMER BANK. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. SAR-2, INTERIOR SHOWING SWITCHBOARD, OPERATOR'S DESK, AND TRANSFORMER BANK. SCE negative no. 10327, November 1, 1923. Photograph by G. Haven Bishop. - Santa Ana River Hydroelectric System, SAR-2 Powerhouse, Redlands, San Bernardino County, CA

77 FR 34874 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

...., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416...., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416...

78 FR 49240 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada... Bombardier, Inc., Q Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada...

78 FR 75291 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada... Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax...

77 FR 66413 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-05

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada..., contact Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5...

13. INTERIOR VIEW OF TOWER OFFICE SHOWING CONTROL TOWER DESK, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR VIEW OF TOWER OFFICE SHOWING CONTROL TOWER DESK, FACING NORTHWEST. - U.S. Naval Base, Pearl Harbor, Signal Tower, Corner of Seventh Street & Avenue D east of Drydock No. 1, Pearl City, Honolulu County, HI

An evaluation of flight path management automation in transport category aircraft

NASA Technical Reports Server (NTRS)

Chandra, D.; Bussolari, S. R.

1991-01-01

A desk-top simulation of a Boeing 757/767 Electronic Flight Instrumentation System (EFIS) and Control Display Unit (CDU) was used in an experiment to compare three modes of communication for the clearance amendment process: standard voice procedures, a textual delivery method, and a graphical delivery method. Eight qualified Boeing 757/767 pilots served as subjects. Each flew nine landing scenarios with three amendments given in each scenario. Both acceptable and unacceptable clearance amendments were presented in order to assess situational awareness. Times for comprehension and execution of the amendment were recorded along with workload ratings, responses to unacceptable amendments, and subjective impressions. The graphical mode was found to be superior in terms of the time measures and subjective ratings. No difference was found between the modes in the ability to detect unacceptable clearances.

Qualitative medical sociology: what are its crowning achievements?

PubMed Central

Chard, J A; Lilford, R J; Court, B V

1997-01-01

Doctors and epidemiologists seldom read or cite qualitative medical sociology; it is little published in medical journals. A large number of articles bewail this lack and provide arguments explaining and justifying the subject. Any examples used in such articles are selected ad hoc. We made a systematic search for the literature and used citation analysis to select the world's top 100 articles. We analysed this trawl and provide resumés of a selection from the 'classics'. Mental health and the organization of medicine are the themes within medical sociology with highest impact. Much highly cited work consists of historical and theoretical analysis done 'at the desk' rather than observation or interview 'in the field'. Citation rates, even for the most famous works in medical sociology, are a small fraction of those for high impact biomedical research. PMID:9496271

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, G P; Logan, C M

We have estimated interference from external background radiation for a computed tomography (CT) scanner. Our intention is to estimate the interference that would be expected for the high-resolution SkyScan 1072 desk-top x-ray microtomography system. The SkyScan system uses a Microfocus x-ray source capable of a 10-{micro}m focal spot at a maximum current of 0.1 mA and a maximum energy of 130 kVp. All predictions made in this report assume using the x-ray source at the smallest spot size, maximum energy, and operating at the maximum current. Some of the systems basic geometry that is used for these estimates are: (1)more » Source-to-detector distance: 250 mm, (2) Minimum object-to-detector distance: 40 mm, and (3) Maximum object-to-detector distance: 230 mm. This is a first-order, rough estimate of the quantity of interference expected at the system detector caused by background radiation. The amount of interference is expressed by using the ratio of exposure expected at the detector of the CT system. The exposure values for the SkyScan system are determined by scaling the measured values of an x-ray source and the background radiation adjusting for the difference in source-to-detector distance and current. The x-ray source that was used for these measurements was not the SkyScan Microfocus x-ray tube. Measurements were made using an x-ray source that was operated at the same applied voltage but higher current for better statistics.« less

Automatically Determining Scale Within Unstructured Point Clouds

NASA Astrophysics Data System (ADS)

Kadamen, Jayren; Sithole, George

2016-06-01

Three dimensional models obtained from imagery have an arbitrary scale and therefore have to be scaled. Automatically scaling these models requires the detection of objects in these models which can be computationally intensive. Real-time object detection may pose problems for applications such as indoor navigation. This investigation poses the idea that relational cues, specifically height ratios, within indoor environments may offer an easier means to obtain scales for models created using imagery. The investigation aimed to show two things, (a) that the size of objects, especially the height off ground is consistent within an environment, and (b) that based on this consistency, objects can be identified and their general size used to scale a model. To test the idea a hypothesis is first tested on a terrestrial lidar scan of an indoor environment. Later as a proof of concept the same test is applied to a model created using imagery. The most notable finding was that the detection of objects can be more readily done by studying the ratio between the dimensions of objects that have their dimensions defined by human physiology. For example the dimensions of desks and chairs are related to the height of an average person. In the test, the difference between generalised and actual dimensions of objects were assessed. A maximum difference of 3.96% (2.93cm) was observed from automated scaling. By analysing the ratio between the heights (distance from the floor) of the tops of objects in a room, identification was also achieved.

Notification: Audit of EPA Customer Service Help Desks, Hotlines, and Clearinghouses

EPA Pesticide Factsheets

Project #OA-FY12-0570, November 29, 2012. The EPA Office of Inspector General (OIG) plans to begin the fieldwork phase of our audit of EPA’s customer service help desks, hotlines, and clearinghouses (customer service lines).

Opportunities and Efficiencies in Building a New Service Desk Model.

PubMed

Mayo, Alexa; Brown, Everly; Harris, Ryan

2017-01-01

In July 2015, the Health Sciences and Human Services Library (HS/HSL) at the University of Maryland, Baltimore (UMB), merged its reference and circulation services, creating the Information Services Department and Information Services Desk. Designing the Information Services Desk with a team approach allowed for the re-examination of the HS/HSL's service model from the ground up. With the creation of a single service point, the HS/HSL was able to create efficiencies, improve the user experience by eliminating handoffs, create a collaborative team environment, and engage information services staff in a variety of new projects.

Refocusing reference services outside the library building: one library's experience.

PubMed

Lubker, Irene M; Henderson, Margaret E; Canevari, Catharine S; Wright, Barbara A

2010-07-01

In response to changing user needs, the library sought ways to meet new challenges and engage users outside of the building. Librarians were removed from the service desk in order to offer support at locations around campus. The service desk in the library was staffed primarily by paraprofessionals with librarians providing support as needed. Targeted staff training was offered, and different scheduling models were used over a period of time. Restructuring the service desk was a complicated endeavor but provided a number of benefits including expansion of services. Along the way, challenges were met and recognized as learning opportunities.

Bike Desks in the Classroom: Energy Expenditure, Physical Health, Cognitive Performance, Brain Functioning, and Academic Performance.

PubMed

Torbeyns, Tine; de Geus, Bas; Bailey, Stephen; Decroix, Lieselot; Van Cutsem, Jeroen; De Pauw, Kevin; Meeusen, Romain

2017-06-01

Physical activity is positively associated with physical health, cognitive performance, brain functioning and academic performance. The aim of this study is to investigate the influence of bike desks in the classroom on adolescents' energy expenditure, physical health, cognitive performance, brain functioning and academic performance. Forty-four adolescents were randomly assigned to control group (CG) or intervention group (IG). During 5 months, the IG used a bike desk for 4 class hours/week. Energy expenditure was measured during 6 consecutive days. Anthropometric parameters, aerobic fitness, academic performance, cognitive performance and brain functioning were assessed before (T0) and after (T1) the intervention. Energy expenditure of the IG was significantly higher during the class hours in which they used the bike desks relative to normal class hours. The CG had a significantly higher BMI at T1 relative to T0 while this was not significantly different for the IG. Aerobic fitness was significantly better in the IG at T1 relative to T0. No significant effects on academic performance cognitive performance and brain functioning were observed. As the implementation of bike desks in the classroom did not interfere with adolescents' academic performance, this can be seen as an effective means of reducing in-class sedentary time and improving adolescents' physical health.

Construction of In-house Databases in a Corporation

NASA Astrophysics Data System (ADS)

Okuda, Yasukazu; Yoshikawa, Ichirou; Sasano, Fumio

The authors describe the outline and the construction process of the in-house technical information system of Mitsui Petrochemical Industries Ltd., “MITOLIS”. This system was constructed in 1981 and has been improved since then to make better use of in-house technical reports. Bibliographic data and keywords of technical reports of R & D division are stored in the host computer system in Iwakuni and can be retrieved by the company members on the desk-side terminal connected to the local area network (LAN). The number of stored reports reaches 6100 from 1970 to 1987.

Moving Another Big Desk.

ERIC Educational Resources Information Center

Fawcett, Gay

1996-01-01

New ways of thinking about leadership require that leaders move their big desks and establish environments that encourage trust and open communication. Educational leaders must trust their colleagues to make wise choices. When teachers are treated democratically as leaders, classrooms will also become democratic learning organizations. (SM)

Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children.

PubMed

Purwaningrum, Lu'lu'; Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur; Muraki, Satoshi

2015-01-01

Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children's age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6-9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children's ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement.

Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

PubMed Central

Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

2015-01-01

Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

Classroom Standing Desks and Sedentary Behavior: A Systematic Review

PubMed Central

Chao, Ariana M.; Irwin, Melinda L.; Owen, Neville; Park, Chorong; Whittemore, Robin; Salmon, Jo

2016-01-01

CONTEXT: Reducing sedentary behaviors, or time spent sitting, is an important target for health promotion in children. Standing desks in schools may be a feasible, modifiable, and acceptable environmental strategy to this end. OBJECTIVE: To examine the impact of school-based standing desk interventions on sedentary behavior and physical activity, health-related outcomes, and academic and behavioral outcomes in school-aged children. DATA SOURCES: Ovid Embase, Medline, PsycINFO, Web of Science, Global Health, and CINAHL. STUDY SELECTION: Full-text peer-reviewed journal publications written in English; samples of school-aged youth (5–18 years of age); study designs including the same participants at baseline and follow-up; and use of a standing desk as a component of the intervention. DATA EXTRACTION: Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. RESULTS: Eight studies satisfied selection criteria and used quasi-experimental (n = 4), randomized controlled trial (n = 3), and pre–post, no control (n = 1) designs. When examined, time spent standing increased in all studies (effect sizes: 0.38–0.71), while sitting time decreased from a range of 59 to 64 minutes (effect sizes: 0.27–0.49). Some studies reported increased physical activity and energy expenditure and improved classroom behavior. LIMITATIONS: One-half of the studies had nonrandomized designs, and most were pilot or feasibility studies. CONCLUSIONS: This initial evidence supports integrating standing desks into the classroom environment; this strategy has the potential to reduce sitting time and increase standing time among elementary schoolchildren. Additional research is needed to determine the impact of standing desks on academic performance and precursors of chronic disease risk. PMID:26801914

Utilizing anthropometric data to improve the usability of desk bikes, and influence of desk bikes on reading and typing performance

PubMed Central

Cho, Jay; Freivalds, Andris; Rovniak, Liza S.

2017-01-01

This study investigated the feasibility of using a desk bike in an office setting. Workstation measurements were introduced to accommodate 95% of the general U.S. population in using desk bikes. Reading and typing performances were compared at three different cycling conditions (no cycling, 10 and 25 watts). Thirty healthy individuals (15 female and 15 male; Age mean: 23.1, σ: 4.19) were recruited based on 5/50/95th percentile stature. Participants were required to select preferred workstation settings and perform reading and typing tasks while pedaling. According to anthropometric measurements and variability from user preference, recommended adjustable ranges of workstation settings for the general U.S. population were derived. Repeated measures ANOVA showed that pedaling had no significant effect on reading comprehension (p > .05), but had significant effect on typing performance (p < .001). A preferred level of cycling intensity was determined (mean 17.3 watts, σ: 3.69). PMID:28166871

Evaluation of a workplace treadmill desk intervention: a randomized controlled trial.

PubMed

Schuna, John M; Swift, Damon L; Hendrick, Chelsea A; Duet, Megan T; Johnson, William D; Martin, Corby K; Church, Timothy S; Tudor-Locke, Catrine

2014-12-01

To evaluate the effectiveness of a 3-month treadmill desk intervention in eliciting changes in physical activity and sedentary behavior among overweight/obese office workers. A randomized controlled trial was conducted among overweight/obese office workers (n = 41; mean age = 40.1 ± 10.1 years) at a private workplace. Participants were randomly assigned to a shared-treadmill desk intervention (n = 21) or a usual working condition control group (n = 20). Accelerometer-determined physical activity and sedentary behavior were measured before and after the intervention. Compared with the control group, the intervention group increased daily steps (1622 steps/day; P = 0.013) and light physical activity (1.6 minutes/hour; P = 0.008), and decreased sedentary time (-3.6 minutes/hour; P = 0.047) during working hours. Shared-treadmill desks in the workplace can be effective at promoting favorable changes in light physical activity (specifically 40 to 99 steps/minute) and sedentary behavior among overweight/obese office workers.

Does a dynamic chair increase office workers' movements? - Results from a combined laboratory and field study.

PubMed

Grooten, Wilhelmus J A; Äng, Björn O; Hagströmer, Maria; Conradsson, David; Nero, Håkan; Franzén, Erika

2017-04-01

Dynamic chairs have the potential to facilitate movements that could counteract health problems associated with sedentary office work. This study aimed to evaluate whether a dynamic chair can increase movements during desk-based office work. Fifteen healthy subjects performed desk-based office work using a dynamic office chair and compared to three other conditions in a movement laboratory. In a field study, the dynamic office chair was studied during three working days using accelerometry. Equivocal results showed that the dynamic chair increased upper body and chair movements as compared to the conventional chair, but lesser movements were found compared to standing. No differences were found between the conditions in the field study. A dynamic chair may facilitate movements in static desk-based office tasks, but the results were not consistent for all outcome measures. Validation of measuring protocols for assessing movements during desk-based office work is warranted. Copyright © 2016 Elsevier Ltd. All rights reserved.

Are Reference Desks Dying Out?

ERIC Educational Resources Information Center

Carlson, Scott

2007-01-01

This article examines how librarians are struggling to redefine, and in some cases eliminate, the venerable institution of reference desk services and it explores the new ways in which reference questions get answered at university libraries. These include fielding questions through e-mail, instant messaging, and other mobile technologies, making…

78 FR 16485 - Commission Information Collection Activities (FERC-607); Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

... submitting the information collection, FERC-607 (Report on Decision or Action on Request for Federal... and is making this notation in its submittal to OMB. DATES: Comments on the collection of information....gov . Attention: Federal Energy Regulatory Commission Desk Officer. The Desk Officer may also be...

78 FR 54880 - Commission Information Collection Activities (FERC-551); Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... making this notation in its submittal to OMB. DATES: Comments on the collection of information are due by... . Attention: Federal Energy Regulatory Commission Desk Officer. The Desk Officer may also be reached via...: Three-year extension of the FERC-551 information collection requirements with no changes to the...

Five Help Desk Tips To Increase Retention Rates, Learner Satisfaction and Revenues.

ERIC Educational Resources Information Center

Feldberg, Jeffrey

2001-01-01

Discusses the necessity of a good help desk available around the clock for students of online courses to ensure a higher retention rate. Recommends a mission that emphasizes student success as the main focus, full time employees, proper training, and short response times. (LRW)

10 CFR 52.3 - Written communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... either by mail addressed: ATTN: Document Control Desk, U.S. Nuclear Regulatory Commission, Washington, DC... submissions can be obtained by visiting the NRC's Web site at http://www.nrc.gov/site-help/e-submittals.html...) through (b)(7) of this section: to the NRC's Document Control Desk (if on paper, the signed original...

10 CFR 63.4 - Communications and records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... follows: (1) By mail addressed: ATTN: Document Control Desk; Director, Office of Nuclear Material Safety... the NRC's offices at 11555 Rockville Pike, Rockville, Maryland; ATTN: Document Control Desk: Director... obtained by visiting the NRC's Web site at http://www.nrc.gov/site-help/e-submittals.html; by e-mail to...

10 CFR 63.4 - Communications and records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... follows: (1) By mail addressed: ATTN: Document Control Desk; Director, Office of Nuclear Material Safety... the NRC's offices at 11555 Rockville Pike, Rockville, Maryland; ATTN: Document Control Desk: Director... obtained by visiting the NRC's Web site at http://www.nrc.gov/site-help/e-submittals.html; by e-mail to...

Guest-Service Agent. Teacher Edition.

ERIC Educational Resources Information Center

Al-Harake, Mounzer

This teacher's guide for the hospitality and tourism industry is designed to include the entry-level competencies students will need to enter any of the occupational areas identified in the front-desk section of the lodging occupations cluster. These occupations include front-desk clerk, cashier, telephone operator, guest-service agent,…

20 CFR 802.211 - Petition for review.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Petition for review. 802.211 Section 802.211 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR RULES OF PRACTICE AND PROCEDURE Prereview... support such proposed result. The Longshore Desk Book and Black Lung Desk Book are not intended as final...

Distributed user interfaces for clinical ubiquitous computing applications.

PubMed

Bång, Magnus; Larsson, Anders; Berglund, Erik; Eriksson, Henrik

2005-08-01

Ubiquitous computing with multiple interaction devices requires new interface models that support user-specific modifications to applications and facilitate the fast development of active workspaces. We have developed NOSTOS, a computer-augmented work environment for clinical personnel to explore new user interface paradigms for ubiquitous computing. NOSTOS uses several devices such as digital pens, an active desk, and walk-up displays that allow the system to track documents and activities in the workplace. We present the distributed user interface (DUI) model that allows standalone applications to distribute their user interface components to several devices dynamically at run-time. This mechanism permit clinicians to develop their own user interfaces and forms to clinical information systems to match their specific needs. We discuss the underlying technical concepts of DUIs and show how service discovery, component distribution, events and layout management are dealt with in the NOSTOS system. Our results suggest that DUIs--and similar network-based user interfaces--will be a prerequisite of future mobile user interfaces and essential to develop clinical multi-device environments.

Enigmatic Moisture Effects on Al2O3 Scale and TBC Adhesion

NASA Technical Reports Server (NTRS)

Smialek, James L.

2008-01-01

Alumina scale adhesion to high temperature alloys is known to be affected primarily by sulfur segregation and reactive element additions. However, adherent scales can become partially compromised by excessive strain energy and cyclic cracking. With time, exposure of such scales to moisture can lead to spontaneous interfacial decohesion, occurring while the samples are maintained at ambient conditions. Examples of this Moisture-Induced Delayed Spallation (MIDS) are presented for NiCrAl and single crystal superalloys, becoming more severe with sulfur level and cyclic exposure conditions. Similarly, delayed failure or Desk Top Spallation (DTS) results are reviewed for thermal barrier coatings (TBCs), culminating in the water drop failure test. Both phenomena are discussed in terms of moisture effects on bulk alumina and bulk aluminides. A mechanism is proposed based on hydrogen embrittlement and is supported by a cathodic hydrogen charging experiment. Hydroxylation of aluminum from the alloy interface appears to be the relevant basic reaction.

Enigmatic Moisture Effects on Al2O3 Scale and TBC Adhesion

NASA Technical Reports Server (NTRS)

Smialek, James L.

2008-01-01

Alumina scale adhesion to high temperature alloys is known to be affected primarily by sulfur segregation and reactive element additions. However adherent scales can become partially compromised by excessive strain energy and cyclic cracking. With time, exposure of such scales to moisture can lead to spontaneous interfacial decohesion, occurring while the samples are maintained at ambient conditions. Examples of this Moisture-Induced Delayed Spallation (MIDS) are presented for NiCrAl and single crystal superalloys, becoming more severe with sulfur level and cyclic exposure conditions. Similarly, delayed failure or Desk Top Spallation (DTS) results are reviewed for TBC s, culminating in the water drop failure test. Both phenomena are discussed in terms of moisture effects on bulk alumina and bulk aluminides. A mechanism is proposed based on hydrogen embrittlement and is supported by a cathodic hydrogen charging experiment. Hydroxylation of aluminum from the alloy interface appears to be the relevant basic reaction.

Research on application of GIS and GPS in inspection and management of city gas pipeline network

NASA Astrophysics Data System (ADS)

Zhou, Jin; Meng, Xiangyin; Tao, Tao; Zhang, Fengpei

2018-01-01

To solve the problems existing in the current Gas Company patrol management, such as inaccurate attendance, whether or not the patrol personnel exceed the scope of patrol inspection. This paper Proposed that we apply the SuperMap iDeskTop 8C plug-in desktop GIS application and development platform, the positioning function of GPS and the data transmission function of 3G/4G/GPRS/Ethernet to develop a gas pipeline inspection management system. We build association between real-time data, pipe network information, patrol data, map information, spatial data and so on to realize the bottom data fusion, use the mobile location system and patrol management client to achieve real-time interaction between the client and the mobile terminal. Practical application shows that the system has completed the standardized management of patrol tasks, the reasonable evaluation of patrol work and the maximum utilization of patrol resources.

Posture and performance: sitting vs. standing for security screening.

PubMed

Drury, C G; Hsiao, Y L; Joseph, C; Joshi, S; Lapp, J; Pennathur, P R

2008-03-01

A classification of the literature on the effects of workplace posture on performance of different mental tasks showed few consistent patterns. A parallel classification of the complementary effect of performance on postural variables gave similar results. Because of a lack of data for signal detection tasks, an experiment was performed using 12 experienced security operators performing an X-ray baggage-screening task with three different workplace arrangements. The current workplace, sitting on a high chair viewing a screen placed on top of the X-ray machine, was compared to a standing workplace and a conventional desk-sitting workplace. No performance effects of workplace posture were found, although the experiment was able to measure performance effects of learning and body part discomfort effects of workplace posture. There are implications for the classification of posture and performance and for the justification of ergonomics improvements based on performance increases.

Spacecube V2.0 Micro Single Board Computer

NASA Technical Reports Server (NTRS)

Petrick, David J. (Inventor); Geist, Alessandro (Inventor); Lin, Michael R. (Inventor); Crum, Gary R. (Inventor)

2017-01-01

A single board computer system radiation hardened for space flight includes a printed circuit board having a top side and bottom side; a reconfigurable field programmable gate array (FPGA) processor device disposed on the top side; a connector disposed on the top side; a plurality of peripheral components mounted on the bottom side; and wherein a size of the single board computer system is not greater than approximately 7 cm.times.7 cm.

Managing and Collecting Student Accounts and Loans: A Desk Reference for Educational Receivables Stewardship

ERIC Educational Resources Information Center

Glezerman, David R.; DeSantis, Dennis

2008-01-01

This handy desk reference will help readers and their institutions develop and maintain a professional environment that will maximize efficiencies and provide the necessary skills to properly manage operations and portfolios while ensuring that students receive fair and equitable service and opportunities. Written for business officers, financial…

Corps Operations

DTIC Science & Technology

2010-11-26

accomplishes these actions by developing, recommending, and briefing the scheme of fires, including both lethal fires and nonlethal actions (electronic...Install and operate the corps information technology help desk. Provide voice, video teleconference, e-mail—Non-Secure Internet Protocol Router...Network (NIPRNET), SECRET Internet Protocol Router Network (SIPRNET), and other communication networks—assistance, and other help desk functions

Teaching between Desks

ERIC Educational Resources Information Center

Ermeling, Bradley A.; Graff-Ermeling, Genevieve

2014-01-01

Watch one of the Japan videos from the Trends in International Mathematics and Science Study (TIMSS)--more specifically, mathematics video 3 on solving inequalities1--and you'll see that after giving his students a word problem to solve, the 8th grade math teacher strolls among the students' desks for almost 15 minutes, leaning over to see what…

The Developing English Skills and Knowledge (DESK) Program Handbook

ERIC Educational Resources Information Center

Rohloff, Jean

2009-01-01

The purpose of the DESK (Developing English Skills and Knowledge) Program at Louisiana State University (LSU) is to help deaf and hard of hearing students make a smooth transition from high school to postsecondary institutions and, in doing so, to ensure their academic and professional success. This handbook documents, in a "how-to"…

The Peer Reference Counseling Program at Odum Library. Training Manual.

ERIC Educational Resources Information Center

Lawrence, Tamiko Danielle; Thomas, Susan; Winston, Mark

The Peer Reference Counseling Program at Valdosta State University (Georgia) is a program designed to provide students with a unique opportunity to work at the Reference Desk at Odum Library. This program employs minority students and trains them to work at the Reference Desk answering basic reference questions and utilizing as well as…

ScienceDesk Project Overview

NASA Technical Reports Server (NTRS)

Keller, Richard M.; Norvig, Peter (Technical Monitor)

2000-01-01

NASA's ScienceDesk Project at the Ames Research Center is responsible for scientific knowledge management which includes ensuring the capture, preservation, and traceability of scientific knowledge. Other responsibilities include: 1) Maintaining uniform information access which is achieved through intelligent indexing and visualization, 2) Collaborating both asynchronous and synchronous science teamwork, 3) Monitoring and controlling semi-autonomous remote experimentation.

Benchmarking Reference Desk Service in Academic Health Science Libraries: A Preliminary Survey.

ERIC Educational Resources Information Center

Robbins, Kathryn; Daniels, Kathleen

2001-01-01

This preliminary study was designed to benchmark patron perceptions of reference desk services at academic health science libraries, using a standard questionnaire. Responses were compared to determine the library that provided the highest-quality service overall and along five service dimensions. All libraries were rated very favorably, but none…

Ergonomic Based Design and Survey of Elementary School Furniture

ERIC Educational Resources Information Center

Maheshwar; Jawalkar, Chandrashekhar S.

2014-01-01

This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

The Problem Patron and the Academic Library Web Site as Virtual Reference Desk.

ERIC Educational Resources Information Center

Taylor, Daniel; Porter, George S.

2002-01-01

Considers problem library patrons in a virtual environment based on experiences at California Institute of Technology's Web site and its use for virtual reference. Discusses the virtual reference desk concept; global visibility and access to the World Wide Web; problematic email; and advantages in the electronic environment. (LRW)

75 FR 65515 - NRC Corporation, USPS Help Desk of Customer Care Center, Including On-Site Leased Workers of Volt...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-25

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,347] NRC Corporation, USPS Help Desk of Customer Care Center, Including On-Site Leased Workers of Volt Consulting, West Columbia, SC; Notice of Affirmative Determination Regarding Application for Reconsideration By application...

78 FR 69428 - Submission for OMB Review; 30-Day Comment Request: Cancer Trials Support Unit (CTSU) (NCI)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

... 202-395-6974, Attention: NIH Desk Officer. Comment Due Date: Comments regarding this information... addition, CTSU collects annual surveys of customer satisfaction for clinical site staff using the CTSU Help Desk, the CTSU Web site, and the Protocol and Information Office (PIO). An ongoing user satisfaction...

10 CFR 50.4 - Written communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: Document Control Desk, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; by hand delivery to... NRC's Web site at http://www.nrc.gov/site-help/e-submittals.html; by e-mail to [email protected] otherwise specified in paragraphs (b)(2) through (b)(7) of this section: to the NRC's Document Control Desk...

Bibliographic Instruction and the Reference Desk: A Symbiotic Relationship.

ERIC Educational Resources Information Center

Vincent, C. Paul

1984-01-01

This essay arguing for retention of sophisticated reference-desk service as separate from library instruction notes brief history of relationship and two fundamental reasons for separation: a "one-shot" lecture could not cover every tool useful for research needs of each individual student; and not all patrons are experiencing library instruction.…

The School Desk: From Concept to Object

ERIC Educational Resources Information Center

Herman, Frederik; Van Gorp, Angelo; Simon, Frank; Depaepe, Marc

2011-01-01

In the authors' aim to go beyond the "silent" school desk they returned to sources such as public contracts, photographs, advertising leaflets and (the often neglected) patents kept in the municipal archives of Brussels. In this article, they focus on the first half of the twentieth century and two phases of the "life-cycle" of…

Information Resources on Online at the Reference Desk. A Selected ERIC Bibliography.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Information Resources, Syracuse, NY.

Seventeen articles and reports published between 1982 and 1984 and cited in "Current Index to Journals in Education" and "Resources in Education" are listed in this bibliography on online services at the reference desk. Topics include interpersonal relations as a necessary part of the information transfer process; role of the…

Help Desk Is Spelled: R-O-I

ERIC Educational Resources Information Center

Villano, Matt

2009-01-01

Protecting one's institution's technology assets and resources is all about maximizing return on those investments--and that means driving users to take full advantage of new technology rollouts, and not sapping or overburdening help desk resources because users are not fully versed in and encouraged to use new tools. That means one will need to…

Taking a Stand: The Effects of Standing Desks on Task Performance and Engagement

PubMed Central

Tomiyama, A. Janet; Ward, Andrew

2017-01-01

Time spent sitting is associated with negative health outcomes, motivating some individuals to adopt standing desk workstations. This study represents the first investigation of the effects of standing desk use on reading comprehension and creativity. In a counterbalanced, within-subjects design, 96 participants completed reading comprehension and creativity tasks while both sitting and standing. Participants self-reported their mood during the tasks and also responded to measures of expended effort and task difficulty. In addition, participants indicated whether they expected that they would perform better on work-relevant tasks while sitting or standing. Despite participants’ beliefs that they would perform worse on most tasks while standing, body position did not affect reading comprehension or creativity performance, nor did it affect perceptions of effort or difficulty. Mood was also unaffected by position, with a few exceptions: Participants exhibited greater task engagement (i.e., interest, enthusiasm, and alertness) and less comfort while standing rather than sitting. In sum, performance and psychological experience as related to task completion were nearly entirely uninfluenced by acute (~30-min) standing desk use. PMID:28825655

Examining new ways of office work between the Netherlands and the USA.

PubMed

Robertson, M; Vink, P

2012-01-01

There are many definitions of new ways of work, but working with a computer at another location than at the office or at the clients' location with Information Communication Technology as a support is becoming more prevalent. A new office having shared desks and facilitating informal meetings along with a changed leadership style is yet another way. Examining the experiences of alternative work styles, telework, between the Netherlands and the USA are especially apparent in the design of office environments as is the emergence of new leadership behaviors to promote safe and healthy work.

Do Sitting, Standing, or Treadmill Desks Impact Psychobiological Indicators of Work Productivity?

PubMed

Gilson, Nicholas D; Hall, Caitlin; Renton, Angela; Ng, Norman; von Hippel, William

2017-10-01

This pilot study investigated the links between psychobiological indicators of work productivity, prolonged desk sitting, and conditions whereby office workers were able to interrupt sitting using a sit-stand or treadmill desk. Twenty participants visited our laboratory and completed their own desk work in counterbalanced sit-only, sit-stand (Varidesk Pro Plus 48™), and sit-walk conditions (Infiniti TR1200-DTS™). Steady-state visually evoked potentials calculated from electroencephalography recordings during a set task at the end of the workday assessed attentional resource. Salivary cortisol samples were taken during the morning and afternoon to measure stress response. Within-subject analyses were used to compare work productivity indicators relative to condition. No significant differences in mean steady-state visually evoked potential amplitude were observed, although attentional resource allocation was found to be the most effective following the sit-stand [1.01 (0.46) μV] compared with the sit-walk [0.9 (0.28) μV] and sit-only [0.91 (0.32) μV] conditions. The mean magnitude of decrease in cortisol was most apparent when workers used treadmill (1.5 nmol/L; P = .007) and sit-stand (1.6 nmol/L; P = .001) desks, and least evident in the sit-only condition (1.0 nmol/L; P = .146). The findings highlight the potential benefits of standing or active deskwork to the allocation of attentional resources and the regulation of stress.

Validation of a patient-centered culturally sensitive health care office staff inventory.

PubMed

Tucker, Carolyn M; Wall, Whitney; Marsiske, Michael; Nghiem, Khanh; Roncoroni, Julia

2015-09-01

Research suggests that patient-perceived culturally sensitive health care encompasses multiple components of the health care delivery system including the cultural sensitivity of front desk office staff. Despite this, research on culturally sensitive health care focuses almost exclusively on provider behaviors, attitudes, and knowledge. This is due in part to the paucity of instruments available to assess the cultural sensitivity of front desk office staff. Thus, the objective of the present study is to determine the psychometric properties of the pilot Tucker-Culturally Sensitive Health Care Office Staff Inventory-Patient Form (T-CSHCOSI-PF), which is an instrument designed to enable patients to evaluate the patient-defined cultural sensitivity of their front desk office staff. A sample of 1648 adult patients was recruited by staff at 67 health care sites across the United States. These patients anonymously completed the T-CSHCOSI-PF, a demographic data questionnaire, and a patient satisfaction questionnaire. Findings Confirmatory factor analyses of the TCSHCOSI-PF revealed that this inventory has two factors with high internal consistency reliability and validity (Cronbach's αs=0.97 and 0.95). It is concluded that the T-CSHCOSI-PF is a psychometrically strong and useful inventory for assessing the cultural sensitivity of front desk office staff. This inventory can be used to support culturally sensitive health care research, evaluate the job performance of front desk office staff, and aid in the development of trainings designed to improve the cultural sensitivity of these office staff.

Geomorphology and the World Wide Web

NASA Astrophysics Data System (ADS)

Shroder, John F.; Bishop, Michael P.; Olsenholler, Jeffrey; Craiger, J. Philip

2002-10-01

The Internet and the World Wide Web have brought many dimensions of new technology to education and research in geomorphology. As with other disciplines on the Web, Web-based geomorphology has become an eclectic mix of whatever material an individual deems worthy of presentation, and in many cases is without quality control. Nevertheless, new electronic media can facilitate education and research in geomorphology. For example, virtual field trips can be developed and accessed to reinforce concepts in class. Techniques for evaluating Internet references helps students to write traditional term papers, but professional presentations can also involve student papers that are published on the Web. Faculty can also address plagiarism issues by using search engines. Because of the lack of peer review of much of the content on the Web, care must be exercised in using it for reference searches. Today, however, refereed journals are going online and can be accessed through subscription or payment per article viewed. Library reference desks regularly use the Web for searches of refereed articles. Research on the Web ranges from communication between investigators, data acquisition, scientific visualization, or comprehensive searches of refereed sources, to interactive analyses of remote data sets. The Nanga Parbat and the Global Land Ice Measurements from Space (GLIMS) Projects are two examples of geomorphologic research that are achieving full potential through use of the Web. Teaching and research in geomorphology are undergoing a beneficial, but sometimes problematic, transition with the new technology. The learning curve is steep for some users but the view from the top is bright. Geomorphology can only prosper from the benefits offered by computer technologies.

Thermal history of sedimentary basins, maturation indices, and kinetics of oil and gas generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tissot, B.P.; Pelet, R.; Ungerer, P.

1987-12-01

Temperature is the most sensitive parameter in hydrocarbon generation. Thus, reconstruction of temperature history is essential when evaluating petroleum prospects. No measurable parameter can be directly converted to paleotemperature. Maturation indices such as vitrinite reflectance, T/sub max/ from Rock-Eval pyrolysis, spore coloration, Thermal Alteration Index (TAI), or concentration of biological markers offer an indirect approach. All these indices are a function of the thermal history through rather complex kinetics, frequently influenced by the type of organic matter. Their significance and validity are reviewed. Besides the problems of identification (e.g. vitrinite) and interlaboratory calibration, it is important to simultaneously interpret kerogenmore » type and maturation and to avoid difficult conversions from one index to another. Geodynamic models, where structural and thermal histories are connected, are another approach to temperature reconstruction which could be calibrated against the present distribution of temperature and the present value of maturation indices. Kinetics of kerogen decomposition controls the amount and composition of hydrocarbons generated. An empirical time-temperature index (TTI), originally introduced by Lopatin, does not allow such a quantitative evaluation. Due to several limitations (no provision for different types of kerogen and different rates of reactions, poor calibration on vitrinite reflectance), it is of limited interest unless one has no access to a desk-top computer. Kinetic models, based on a specific calibration made on actual source rock samples, can simulate the evolution of all types of organic matter and can provide a quantitative evaluation of oil and gas generated. 29 figures.« less

Implementation of Active Workstations in University Libraries-A Comparison of Portable Pedal Exercise Machines and Standing Desks.

PubMed

Bastien Tardif, Camille; Cantin, Maude; Sénécal, Sylvain; Léger, Pierre-Majorique; Labonté-Lemoyne, Élise; Begon, Mickael; Mathieu, Marie-Eve

2018-06-12

Sedentary behaviors are an important issue worldwide, as prolonged sitting time has been associated with health problems. Recently, active workstations have been developed as a strategy to counteract sedentary behaviors. The present study examined the rationale and perceptions of university students’ and staff following their first use of an active workstation in library settings. Ninety-nine volunteers completed a self-administered questionnaire after using a portable pedal exercise machine (PPEM) or a standing desk (SD). Computer tasks were performed on the SD ( p = 0.001) and paperwork tasks on a PPEM ( p = 0.037) to a larger extent. Men preferred the SD and women chose the PPEM ( p = 0.037). The appreciation of the PPEM was revealed to be higher than for the SD, due to its higher scores for effective, useful, functional, convenient, and comfortable dimensions. Younger participants (<25 years of age) found the active workstation more pleasant to use than older participants, and participants who spent between 4 to 8 h per day in a seated position found active workstations were more effective and convenient than participants sitting fewer than 4 h per day. The results of this study are a preliminary step to better understanding the feasibility and acceptability of active workstations on university campuses.

Student's Body Dimensions in Relation to Classroom Furniture.

PubMed

Baharampour, Samira; Nazari, Jalil; Dianat, Iman; Asgharijafarabadi, Mohamad

2013-01-01

This study was carried out to investigate the fit between university student's anthropometry and classroom furniture dimensions. In this cross-sectional and descriptive-analyzing study conducted in 2012, a total of 194 students (aged 18 through 30 years), were recruited randomly from Tabriz University of Medical Science community. The body size of each student was assessed using anthropometric measurements including shoulder height, elbow height, popliteal height, buttock-popliteal length, hip breadth and distance between elbows. Combinational equations defined the acceptable furni-ture dimensions according to anthropometry and match percentages were computed, according to either the existing situations assuming that they could use the most appropriate of the sizes available. Desk and seat height were higher than the accepted limits for most students (92.5% and 98.4%, respectively), while seat depth was appropriate for only 84.6% of students. The data indicate a mismatch between the students' bodily dimensions and the classroom furniture available to them. The chairs are too high and too deep and desks are also too high for the pupils. This situation may have negative effects on the sitting posture of the students especially when reading and writing. High mismatch percentages were found between furniture and stu-dents' anthropometry. The results confirm that furniture for university students should be selected and designed busied on their anthropometric dimensions.

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

PubMed Central

Liu, Haoting; Zhou, Qianxiang; Yang, Jin; Jiang, Ting; Liu, Zhizhen; Li, Jie

2017-01-01

An imaging sensor-based intelligent Light Emitting Diode (LED) lighting system for desk use is proposed. In contrast to the traditional intelligent lighting system, such as the photosensitive resistance sensor-based or the infrared sensor-based system, the imaging sensor can realize a finer perception of the environmental light; thus it can guide a more precise lighting control. Before this system works, first lots of typical imaging lighting data of the desk application are accumulated. Second, a series of subjective and objective Lighting Effect Evaluation Metrics (LEEMs) are defined and assessed for these datasets above. Then the cluster benchmarks of these objective LEEMs can be obtained. Third, both a single LEEM-based control and a multiple LEEMs-based control are developed to realize a kind of optimal luminance tuning. When this system works, first it captures the lighting image using a wearable camera. Then it computes the objective LEEMs of the captured image and compares them with the cluster benchmarks of the objective LEEMs. Finally, the single LEEM-based or the multiple LEEMs-based control can be implemented to get a kind of optimal lighting effect. Many experiment results have shown the proposed system can tune the LED lamp automatically according to environment luminance changes. PMID:28208781

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback.

PubMed

Liu, Haoting; Zhou, Qianxiang; Yang, Jin; Jiang, Ting; Liu, Zhizhen; Li, Jie

2017-02-09

An imaging sensor-based intelligent Light Emitting Diode (LED) lighting system for desk use is proposed. In contrast to the traditional intelligent lighting system, such as the photosensitive resistance sensor-based or the infrared sensor-based system, the imaging sensor can realize a finer perception of the environmental light; thus it can guide a more precise lighting control. Before this system works, first lots of typical imaging lighting data of the desk application are accumulated. Second, a series of subjective and objective Lighting Effect Evaluation Metrics (LEEMs) are defined and assessed for these datasets above. Then the cluster benchmarks of these objective LEEMs can be obtained. Third, both a single LEEM-based control and a multiple LEEMs-based control are developed to realize a kind of optimal luminance tuning. When this system works, first it captures the lighting image using a wearable camera. Then it computes the objective LEEMs of the captured image and compares them with the cluster benchmarks of the objective LEEMs. Finally, the single LEEM-based or the multiple LEEMs-based control can be implemented to get a kind of optimal lighting effect. Many experiment results have shown the proposed system can tune the LED lamp automatically according to environment luminance changes.

My Classroom: Philippines

ERIC Educational Resources Information Center

Santoro, Cerise

2017-01-01

In his first teaching assignment, as a fifth-grade English teacher, Edgar Manaran had only 20 desks for 48 students. Yet he was able to apply productive classroom strategies throughout his 25-hour teaching week. Some of his students sat on plastic chairs due to the shortage of desks, but that did not change the dynamic of Mr. Manaran's classes. He…

Late-Night Stress on the IT Help Desk

ERIC Educational Resources Information Center

Carnevale, Dan

2007-01-01

With more and more students--especially those taking online courses--demanding access to technology help at all hours of the day and night, colleges are responding by extending help-desk hours. More than half are open late into the evening, according to a recent survey by Educause, the educational technology consortium, and a few are available…

Strengthening Education in the Muslim World. Summary of the Desk Study. Issue Paper.

ERIC Educational Resources Information Center

Benoliel, Sharon

This issue paper, one in a series that United States Agency for International Development (USAID) produces, provides analytical input to policy makers and practitioners on ways to address the pressing educational challenges in the Muslim world. The paper summarizes the findings and guidance contained in a full report of a three month desk study…

Redesign of the IS/ICT Help Desk at a Spanish Public University

ERIC Educational Resources Information Center

Bulchand-Gidumal, Jacques; Melian-Gonzalez, Santiago

2010-01-01

Faculty, administrative staff and students constantly demand more IS/ICT services in higher education institutions. Specifically, they demand high-quality user support from the university's help desk. Good service means, first of all, having enough people to provide the service. Responding to the dilemma of not being able to deliver these services…

They're Taking Requests: Student Techs Command the Help Desk

ERIC Educational Resources Information Center

Demski, Jennifer

2010-01-01

The new faces on the help desk are younger, work for cheap, and may be the tech savviest in the building. This article describes how two IT training programs are teaching students valuable technology skills while providing schools with a much-needed lift to their troubleshooting teams. The programs--Generation YES and Mouse Squad--put students at…

The Healthcare Administrator’s Desk Reference: A Managed Care and Health Care Contracting Dictionary for the Military Health System

DTIC Science & Technology

1998-07-01

Intermediate Care Facility ICN Internal Control Number ICU Intensive Care Unit Desk Reference 59 ID Identification IDC Independent Duty Corpsman IDFN... Intermediate Care Facility -- A less expensive healthcare setting for patients who are not in need of acute or skilled nursing care but yet need more care

76 FR 66739 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... following collection of information: 1625-0006, Shipping Articles. Our ICR describes the information we seek...., Washington, DC 20590-0001. (b) To OIRA, 725 17th Street NW., Washington, DC 20503, attention Desk Officer for..., attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this Notice. Comments...

How Less Is Truly More: Merging Library Support Services

ERIC Educational Resources Information Center

Skellen, Kendra; Kyrychenko, Alex

2016-01-01

In the summer of 2010, to provide a "one-stop shop" service point to Woodruff Library patrons, the Circulation, Reference, and Learning Commons (LC) desks merged into the unified Library Service Desk (LSD) under Access Services. Last year, due to organizational changes in the library and IT, and anticipated support needs of the new LC…

Aiming for Service Excellence: Implementing a Plan for Customer Service Quality at a Blended Service Desk

ERIC Educational Resources Information Center

Oud, Joanne; Genzinger, Peter

2016-01-01

This article discusses a public service review and redesign that resulted in a blended service desk combining reference and circulation functions, staffed by nonlibrarians. The redesign implements a number of organizational structures that encourage service excellence, as found in the business literature and in examples of nonlibrary organizations…

78 FR 42533 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-16

..., 725 17th Street NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand.... To ensure your comments are received in a timely manner, mark the fax, attention Desk Officer for the... sold. Dated: July 3, 2013. R. E. Day, Rear Admiral, U. S. Coast Guard, Assistant Commandant for Command...

77 FR 39248 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-02

...., Washington, DC 20590-0001. (b) To OIRA, 725 17th Street NW., Washington, DC 20503, attention Desk Officer for..., attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this Notice. Comments...: June 22, 2012. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control...

76 FR 62427 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

...., Washington, DC 20590-0001. (b) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this...: September 30, 2011. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control...

77 FR 9949 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

... Street NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF... comments are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF.... R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

78 FR 74156 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

..., attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above, between 9 a.m. and 5 p... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public.... Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

This Is the Door... A Cumulative Tale

ERIC Educational Resources Information Center

Brown, Judy

2007-01-01

At one time, the Caldwell High School Library at Caldwell Exempted Village Schools in Caldwell, Ohio, had two sections--the main room with the shelves, circulation desk, and tables and chairs, and an adjoining room with student desks. There was a wide opening to the back room, and glass partitions in the upper half of the wall separating the two…

Where Does that Electronic Resource Fit on the Library Web Page?

ERIC Educational Resources Information Center

Digby, Todd R.

2004-01-01

The author of this article is an automation librarian, but at times he also works at the reference desk, as well as teaching library instruction and literacy classes. Working at the reference desk, he learns how users handle their library's information technology. This article explores the conclusions that the author has reached regarding the…

76 FR 72959 - Collection of Information Under Review by Office of Management and Budget

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF... party to advertise where claims may be sent after an incident occurs. Forms: None. Burden Estimate: The...

Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

PubMed

Savanur, C S; Altekar, C R; De, A

2007-10-01

Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

Where Did the Reference Desk Go? Transforming Staff and Space to Meet User Needs

ERIC Educational Resources Information Center

Bunnett, Brian; Boehme, Andrea; Hardin, Steve; Arvin, Shelley; Evans, Karen; Huey, Paula; LaBella, Carey

2016-01-01

A sharp decline in the number of reference queries prompted the library administration at Indiana State University to begin a project to combine the circulation, reference, and IT desks to reduce staffing at a new consolidated service point. All faculty and staff in the reference/instruction and circulation units participated in the project. The…

75 FR 28275 - Collection of Information Under Review by Office of Management and Budget; OMB Control Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Fax. (a) To DMF, 202... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this...: May 10, 2010. M.B. Lytle, Captain, U.S. Coast Guard, Acting Assistant Commandant for Command, Control...

Role Reinvention, Structural Defense, or Resigned Surrender: Institutional Approaches to Technological Change and Reference Librarianship

ERIC Educational Resources Information Center

LeMaistre, Tiffany; Embry, Rebecka L.; Van Zandt, Lindsey L.; Bailey, Diane E.

2012-01-01

In a comparative field study of ten libraries, we show how technological advances in electronic and digital resources have led to an onslaught of technology questions at the reference desk while prompting new and challenging work away from the desk. Libraries in our sample varied in their approaches to dealing with technological change, with…

Astronomical catalog desk reference, 1994 edition

NASA Technical Reports Server (NTRS)

1994-01-01

The Astronomical Catalog Desk Reference is designed to aid astronomers in locating machine readable catalogs in the Astronomical Data Center (ADC) archives. The key reference components of this document are as follows: A listing of shortened titles for all catalogs available from the ADC (includes the name of the lead author and year of publication), brief descriptions of over 300 astronomical catalogs, an index of ADC catalog numbers by subject keyword, and an index of ADC catalog numbers by author. The heart of this document is the set of brief descriptions generated by the ADC staff. The 1994 edition of the Astronomical Catalog Desk Reference contains descriptions for over one third of the catalogs in the ADC archives. Readers are encouraged to refer to this section for concise summaries of those catalogs and their contents.

NASA Tech Briefs, July 2005

NASA Technical Reports Server (NTRS)

2005-01-01

Thin-Film Resistance Heat-Flux Sensors Circuit Indicates that Voice-Recording Disks are Nearly Full Optical Sensing of Combustion Instabilities in Gas Turbines Topics include: Crane-Load Contact Sensor; Hexagonal and Pentagonal Fractal Multiband Antennas; Multifunctional Logic Gate Controlled by Temperature; Multifunctional Logic Gate Controlled by Supply Voltage; Power Divider for Waveforms Rich in Harmonics; SCB Quantum Computers Using iSWAP and 1-Qubit Rotations; CSAM Metrology Software Tool; Update on Rover Sequencing and Visualization Program; Selecting Data from a Star Catalog; Rotating Desk for Collaboration by Two Computer Programmers; Variable-Pressure Washer; Magnetically Attached Multifunction Maintenance Rover; Improvements in Fabrication of Sand/Binder Cores for Casting; Solid Freeform Fabrication of Composite-Material Objects; Efficient Computational Model of Hysteresis; Gauges for Highly Precise Metrology of a Compound Mirror; Improved Electrolytic Hydrogen Peroxide Generator; High-Power Fiber Lasers Using Photonic Band Gap Materials; Ontology-Driven Information Integration; Quantifying Traversability of Terrain for a Mobile Robot; More About Arc-Welding Process for Making Carbon Nanotubes; Controlling Laser Spot Size in Outer Space; or Software-Reconfigurable Processors for Spacecraft.

Musical Chairs: An Innovative Teaching and Learning Method

ERIC Educational Resources Information Center

Kuo, Ya-Hui

2010-01-01

How teaching and learning takes place in classrooms can be easily seen by the way classrooms are set up: Students' desks and chairs are arranged in rolls while teachers' desks are up front. Yet, why must teachers be the ones who lecture, why can't it be students? Would it be better or worse when teachers are the receivers and the students are the…

A Simple Calorimetric Experiment that Highlights Aspects of Global Heat Retention and Global Warming

ERIC Educational Resources Information Center

Burley, Joel D.; Johnston, Harold S.

2007-01-01

In this laboratory experiment, general chemistry students measure the heating curves for three different systems: (i) 500 g of room-temperature water heated by a small desk lamp, (ii) 500 g of an ice-water mixture warmed by conduction with room-temperature surroundings, and (iii) 500 g of an ice-water mixture heated by a small desk lamp and by…

High Performance Computing (HPC) Innovation Service Portal Pilots Cloud Computing (HPC-ISP Pilot Cloud Computing)

DTIC Science & Technology

2011-08-01

5 Figure 4 Architetural diagram of running Blender on Amazon EC2 through Nimbis...classification of streaming data. Example input images (top left). All digit prototypes (cluster centers) found, with size proportional to frequency (top...Figure 4 Architetural diagram of running Blender on Amazon EC2 through Nimbis 1 http

Enabling Computational Dynamics in Distributed Computing Environments Using a Heterogeneous Computing Template

DTIC Science & Technology

2011-08-09

fastest 10 supercomputers in the world. Both systems rely on GPU co-processing, one using AMD cards, the second, called Nebulae , using NVIDIA Tesla...Page 9 of 10 UNCLASSIFIED capability of almost 3 petaflop/s, the highest in TOP500, Nebulae only holds the No. 2 position on the TOP500 list of the

The Development of the Non-hydrostatic Unified Model of the Atmosphere (NUMA)

DTIC Science & Technology

2011-09-19

capabilities: 1.  Highly scalable on current and future computer architectures ( exascale computing: this means CPUs and GPUs) 2.  Flexibility to use a...From Terascale to Petascale/ Exascale Computing •  10 of Top 500 are already in the Petascale range •  3 of top 10 are GPU-based machines 2

Effect of a novel two-desk sit-to-stand workplace (ACTIVE OFFICE) on sitting time, performance and physiological parameters: protocol for a randomized control trial.

PubMed

Schwartz, Bernhard; Kapellusch, Jay M; Schrempf, Andreas; Probst, Kathrin; Haller, Michael; Baca, Arnold

2016-07-15

Prolonged sitting is ubiquitous in modern society and linked to several diseases. Height-adjustable desks are being used to decrease worksite based sitting time (ST). Single-desk sit-to-stand workplaces exhibit small ST reduction potential and short-term loss in performance. The aim of this paper is to report the study design and methodology of an ACTIVE OFFICE trial. The study was a 1-year three-arm, randomized controlled trial in 18 healthy Austrian office workers. Allocation was done via a regional health insurance, with data collection during Jan 2014 - March 2015. Participants were allocated to either an intervention or control group. Intervention group subjects were provided with traditional or two-desk sit-to-stand workstations in either the first or the second half of the study, while control subjects did not experience any changes during the whole study duration. Sitting time and physical activity (IPAQ-long), cognitive performance (text editing task, Stroop-test, d2R test of attention), workload perception (NASA-TLX) and physiological parameters (salivary cortisol, heartrate variability and body weight) were measured pre- and post-intervention (23 weeks after baseline) for intervention and control periods. Postural changes and sitting/standing time (software logger) were recorded at the workplace for the whole intervention period. This study evaluates the effects of a novel two-desk sit-to-stand workplace on sitting time, physical parameters and work performance of healthy office based workers. If the intervention proves effective, it has a great potential to be implemented in regular workplaces to reduce diseases related to prolonged sitting. ClinicalTrials.gov Identifier: NCT02825303 , July 2016 (retrospectively registered).

Are Technology Interruptions Impacting Your Bottom Line? An Innovative Proposal for Change.

PubMed

Ledbetter, Tamera; Shultz, Sarah; Beckham, Roxanne

2017-10-01

Nursing interruptions are a costly and dangerous variable in acute care hospitals. Malfunctioning technology equipment interrupts nursing care and prevents full utilization of computer safety systems to prevent patient care errors. This paper identifies an innovative approach to nursing interruptions related to computer and computer cart malfunctions. The impact on human resources is defined and outcome measures were proposed. A multifaceted proposal, based on a literature review, aimed at reducing nursing interruptions is presented. This proposal is expected to increase patient safety, as well as patient and nurse satisfaction. Acute care hospitals utilizing electronic medical records and bar-coded medication administration technology. Nurses, information technology staff, nursing informatics staff, and all leadership teams affected by technology problems and their proposed solutions. Literature from multiple fields was reviewed to evaluate research related to computer/computer cart failures, and the approaches used to resolve these issues. Outcome measured strategic goals related to patient safety, and nurse and patient satisfaction. Specific help desk metrics will demonstrate the effect of interventions. This paper addresses a gap in the literature and proposes practical and innovative solutions. A comprehensive computer and computer cart repair program is essential for patient safety, financial stewardship, and utilization of resources. © 2015 Wiley Periodicals, Inc.

Keep Laptop Cool with Simple Custom Riser

ERIC Educational Resources Information Center

Rynone, William

2012-01-01

Although the author's netbook computer--a diminished capacity laptop computer--uses less power than its big brother, when working with it on his lap, his thighs are roasted, even in the winter. When using the unit on a flat surface, such as a table top, the bottom surface of the computer and table top become quite warm--and it is generally…

Top 10 Threats to Computer Systems Include Professors and Students

ERIC Educational Resources Information Center

Young, Jeffrey R.

2009-01-01

In this article, the author presents the top-10 list of campus computer-security risks he compiled based on several recent computing surveys and interviews with more than a dozen college-technology leaders. The list, ordered from least to most serious, is by no means scientific, but it gives a sense of where today's battle lines are--and why…

Beyond the Reference Desk: A Study on the Effectiveness of Low-Cost Distance Library Services at California State University San Marcos

ERIC Educational Resources Information Center

Olivas, Antonia P.; Chan, Ian

2013-01-01

Many of our reference interactions are face-to-face at a desk or in our offices. Unfortunately, not all of our students are on campus. Whether a non-traditional student or a traditional undergraduate, more of our patrons are attending online classes or attending satellite campuses with no librarians on site. It's difficult to reach these students,…

Knowledge of stakeholders in the game meat industry and its effect on compliance with food safety standards.

PubMed

Bekker, Johan Leon; Hoffman, Louw C; Jooste, Piet J

2011-10-01

The game meat industry is continuing to grow in South Africa. Several stakeholders are involved in the game meat supply chain and a high level of knowledge is necessary to ensure compliance with legislation and standards. It was therefore necessary to determine the level of knowledge of the stakeholders since this has not been determined before. Information regarding the extent of stakeholders' knowledge and the possible impact on compliance to standards was obtained through a desk-top study and an analysis of questionnaire responses from industry, consumers and relevant authorities. Results have shown that consumers have a specific expectation regarding the safe production of game meat. Limitations in the knowledge of the stakeholders have been identified. Understanding these limitations can assist policy-makers, law enforcers and the game meat industry in developing strategies to alleviate the problem. The result of this study may assist in providing consumers with game meat that is safe for human consumption.

Workplace interventions for reducing sitting at work.

PubMed

Shrestha, Nipun; Ijaz, Sharea; Kukkonen-Harjula, Katriina T; Kumar, Suresh; Nwankwo, Chukwudi P

2015-01-26

The number of people working whilst seated at a desk keeps increasing worldwide. As sitting increases, occupational physical strain declines at the same time. This has contributed to increases in cardiovascular disease, obesity and diabetes. Therefore, reducing and breaking up the time that people spend sitting while at work is important for health. To evaluate the effects of workplace interventions to reduce sitting at work compared to no intervention or alternative interventions. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, CINAHL, OSH UPDATE, PsycINFO, Clinical trials.gov and the World Health Organization (WHO) search trial portal up to 14 February, 2014. We also searched reference lists of articles and contacted authors. We included randomised controlled trials (RCT), cluster-randomised controlled trials (cRCTs), and quasi-randomised controlled trials of interventions to reduce sitting at work. For changes of workplace arrangements, we also included controlled before-and-after studies (CBAs) with a concurrent control group. The primary outcome was time spent sitting at work per day, either self-reported or objectively measured by means of an accelerometer coupled with an inclinometer. We considered energy expenditure, duration and number of sitting episodes lasting 30 minutes or more, work productivity and adverse events as secondary outcomes. Two review authors independently screened titles, abstracts and full-text articles for study eligibility. Two review authors independently extracted data and assessed risk of bias. We contacted authors for additional data where required. We included eight studies, four RCTs, three CBAs and one cRCT, with a total of 1125 participants. The studies evaluated physical workplace changes (three studies), policy changes (one study) and information and counselling (four studies). No studies investigated the effect of treadmill desks, stepping devices, periodic breaks or standing or walking meetings. All the studies were at high risk of bias. The quality of the evidence was very low to low. Half of the studies were from Australia and the other half from Europe, with none from low- or middle-income countries. Physical workplace changesWe found very low quality evidence that sit-stand desks with or without additional counselling reduced sitting time at work per workday at one week follow-up (MD -143 minutes (95% CI -184 to -102, one study, 31 participants) and at three months' follow-up (MD - 113 minutes, 95% CI -143 to -84, two studies, 61 participants) compared to no intervention. Total sitting time during the whole day decreased also with sit-stand desks compared to no intervention (MD -78 minutes, 95% CI -125 to -30, one study, 31 participants) as did the duration of sitting episodes lasting 30 minutes or more (MD -52 minutes, 95% CI -79 to -26, two studies, 74 participants). Sit-stand desks did not have a considerable effect on work performance and had an inconsistent effect on musculoskeletal symptoms and sick leave. Policy changesWalking strategies had no considerable effect on sitting at work (MD -16 minutes, 95% CI -54 to 23, one study, 179 participants, low quality evidence). Information and counsellingGuideline-based counselling by occupational physicians reduced sitting time at work (MD -28 minutes, 95% CI -54 to -2, one study, 396 participants, low quality evidence). There was no considerable effect on reduction in total sitting time during the whole day.Mindfulness training induced a non-significant reduction in workplace sitting time (MD -2 minutes, 95% CI -22 to 18) at six months' follow-up and at 12 months' follow-up (MD -16 minutes, 95% CI -45 to 12, one study, 257 participants, low quality evidence).There was an inconsistent effect of computer prompting on sitting time at work. One study found no considerable effect on sitting at work (MD -18 minutes, 95% CI -53 to 17, 28 participants, low quality evidence) at 10 days' follow-up, while another study reported a significant reduction in sitting at work (MD -55 minutes, 95% CI -96 to -14, 34 participants, low quality evidence) at 13 weeks' follow-up. Computer prompting software also led to a non-significant increase in energy expenditure at work (MD 278 calories/workday, 95% CI 0 to 556, one study, 34 participants, low quality evidence) at 13 weeks' follow-up. At present there is very low quality evidence that sit-stand desks can reduce sitting time at work, but the effects of policy changes and information and counselling are inconsistent. There is a need for high quality cluster-randomised trials to assess the effects of different types of interventions on objectively measured sitting time. There are many ongoing trials that might change these conclusions in the near future.

Physically Based Virtual Surgery Planning and Simulation Tools for Personal Health Care Systems

NASA Astrophysics Data System (ADS)

Dogan, Firat; Atilgan, Yasemin

The virtual surgery planning and simulation tools have gained a great deal of importance in the last decade in a consequence of increasing capacities at the information technology level. The modern hardware architectures, large scale database systems, grid based computer networks, agile development processes, better 3D visualization and all the other strong aspects of the information technology brings necessary instruments into almost every desk. The last decade’s special software and sophisticated super computer environments are now serving to individual needs inside “tiny smart boxes” for reasonable prices. However, resistance to learning new computerized environments, insufficient training and all the other old habits prevents effective utilization of IT resources by the specialists of the health sector. In this paper, all the aspects of the former and current developments in surgery planning and simulation related tools are presented, future directions and expectations are investigated for better electronic health care systems.

The Virtual Pelvic Floor, a tele-immersive educational environment.

PubMed Central

Pearl, R. K.; Evenhouse, R.; Rasmussen, M.; Dech, F.; Silverstein, J. C.; Prokasy, S.; Panko, W. B.

1999-01-01

This paper describes the development of the Virtual Pelvic Floor, a new method of teaching the complex anatomy of the pelvic region utilizing virtual reality and advanced networking technology. Virtual reality technology allows improved visualization of three-dimensional structures over conventional media because it supports stereo vision, viewer-centered perspective, large angles of view, and interactivity. Two or more ImmersaDesk systems, drafting table format virtual reality displays, are networked together providing an environment where teacher and students share a high quality three-dimensional anatomical model, and are able to converse, see each other, and to point in three dimensions to indicate areas of interest. This project was realized by the teamwork of surgeons, medical artists and sculptors, computer scientists, and computer visualization experts. It demonstrates the future of virtual reality for surgical education and applications for the Next Generation Internet. Images Figure 1 Figure 2 Figure 3 PMID:10566378

PVT: An Efficient Computational Procedure to Speed up Next-generation Sequence Analysis

PubMed Central

2014-01-01

Background High-throughput Next-Generation Sequencing (NGS) techniques are advancing genomics and molecular biology research. This technology generates substantially large data which puts up a major challenge to the scientists for an efficient, cost and time effective solution to analyse such data. Further, for the different types of NGS data, there are certain common challenging steps involved in analysing those data. Spliced alignment is one such fundamental step in NGS data analysis which is extremely computational intensive as well as time consuming. There exists serious problem even with the most widely used spliced alignment tools. TopHat is one such widely used spliced alignment tools which although supports multithreading, does not efficiently utilize computational resources in terms of CPU utilization and memory. Here we have introduced PVT (Pipelined Version of TopHat) where we take up a modular approach by breaking TopHat’s serial execution into a pipeline of multiple stages, thereby increasing the degree of parallelization and computational resource utilization. Thus we address the discrepancies in TopHat so as to analyze large NGS data efficiently. Results We analysed the SRA dataset (SRX026839 and SRX026838) consisting of single end reads and SRA data SRR1027730 consisting of paired-end reads. We used TopHat v2.0.8 to analyse these datasets and noted the CPU usage, memory footprint and execution time during spliced alignment. With this basic information, we designed PVT, a pipelined version of TopHat that removes the redundant computational steps during ‘spliced alignment’ and breaks the job into a pipeline of multiple stages (each comprising of different step(s)) to improve its resource utilization, thus reducing the execution time. Conclusions PVT provides an improvement over TopHat for spliced alignment of NGS data analysis. PVT thus resulted in the reduction of the execution time to ~23% for the single end read dataset. Further, PVT designed for paired end reads showed an improved performance of ~41% over TopHat (for the chosen data) with respect to execution time. Moreover we propose PVT-Cloud which implements PVT pipeline in cloud computing system. PMID:24894600

PVT: an efficient computational procedure to speed up next-generation sequence analysis.

PubMed

Maji, Ranjan Kumar; Sarkar, Arijita; Khatua, Sunirmal; Dasgupta, Subhasis; Ghosh, Zhumur

2014-06-04

High-throughput Next-Generation Sequencing (NGS) techniques are advancing genomics and molecular biology research. This technology generates substantially large data which puts up a major challenge to the scientists for an efficient, cost and time effective solution to analyse such data. Further, for the different types of NGS data, there are certain common challenging steps involved in analysing those data. Spliced alignment is one such fundamental step in NGS data analysis which is extremely computational intensive as well as time consuming. There exists serious problem even with the most widely used spliced alignment tools. TopHat is one such widely used spliced alignment tools which although supports multithreading, does not efficiently utilize computational resources in terms of CPU utilization and memory. Here we have introduced PVT (Pipelined Version of TopHat) where we take up a modular approach by breaking TopHat's serial execution into a pipeline of multiple stages, thereby increasing the degree of parallelization and computational resource utilization. Thus we address the discrepancies in TopHat so as to analyze large NGS data efficiently. We analysed the SRA dataset (SRX026839 and SRX026838) consisting of single end reads and SRA data SRR1027730 consisting of paired-end reads. We used TopHat v2.0.8 to analyse these datasets and noted the CPU usage, memory footprint and execution time during spliced alignment. With this basic information, we designed PVT, a pipelined version of TopHat that removes the redundant computational steps during 'spliced alignment' and breaks the job into a pipeline of multiple stages (each comprising of different step(s)) to improve its resource utilization, thus reducing the execution time. PVT provides an improvement over TopHat for spliced alignment of NGS data analysis. PVT thus resulted in the reduction of the execution time to ~23% for the single end read dataset. Further, PVT designed for paired end reads showed an improved performance of ~41% over TopHat (for the chosen data) with respect to execution time. Moreover we propose PVT-Cloud which implements PVT pipeline in cloud computing system.

[Volatile organic compounds (VOCs) emitted from furniture and electrical appliances].

PubMed

Tanaka-Kagawa, Toshiko; Jinno, Hideto; Furukawa, Yoko; Nishimura, Tetsuji

2010-01-01

Organic chemicals are widely used as ingredients in household products. Therefore, furniture and other household products as well as building products may influence the indoor air quality. This study was performed to estimate quantitatively influence of household products on indoor air quality. Volatile organic compound (VOC) emissions were investigated for 10 products including furniture (chest, desk, dining table, sofa, cupboard) and electrical appliances (refrigerator, electric heater, desktop personal computer, liquid crystal display television and audio) by the large chamber test method (JIS A 1912) under the standard conditions of 28 degrees C, 50% relative humidity and 0.5 times/h ventilation. Emission rate of total VOC (TVOC) from the sofa showed the highest; over 7900 microg toluene-equivalent/unit/h. Relatively high TVOC emissions were observed also from desk and chest. Based on the emission rates, the impacts on the indoor TVOC were estimated by the simple model with a volume of 17.4 m3 and ventilation frequency of 0.5 times/h. The estimated TVOC increment for the sofa was 911 microg/m3, accounting for almost 230% of the provisional target value, 400 microg/m3. The values of estimated increment of toluene emitted from cupboard and styrene emitted from refrigerator were 10% and 16% of guideline values, respectively. These results revealed that VOC emissions from household products may influence significantly indoor air quality.

Training Top 10 Hall of Fame

ERIC Educational Resources Information Center

Training, 2012

2012-01-01

Microsoft Corporation and SCC Soft Computer are the newest inductees into the Training Top 10 Hall of Fame, joining the ranks of the 11 companies named to the hall since its inception in 2008 (Wyeth Pharmaceuticals subsequently was acquired by Pfizer Inc. in 2009). These 11 companies held Top 10 spots in the Training Top 50, Top 100, and now Top…

The patient and the computer in the primary care consultation

PubMed Central

Arnold, Michael; Phillips, Christine; Trumble, Stephen; Dwan, Kathryn

2011-01-01

Objective Studies of the doctor–patient relationship have focused on the elaboration of power and/or authority using a range of techniques to study the encounter between doctor and patient. The widespread adoption of computers by doctors brings a third party into the consultation. While there has been some research into the way doctors view and manage this new relationship, the behavior of patients in response to the computer is rarely studied. In this paper, the authors use Goffman's dramaturgy to explore patients' approaches to the doctor's computer in the consultation, and its influence on the patient–doctor relationship. Design Observational study of Australian general practice. 141 consultations from 20 general practitioners were videotaped and analyzed using a hermeneutic framework. Results Patients negotiated the relationship between themselves, the doctor, and the computer demonstrating two themes: dyadic (dealing primarily with the doctor) or triadic (dealing with both computer and doctor). Patients used three signaling behaviors in relation to the computer on the doctor's desk (screen watching, screen ignoring, and screen excluding) to influence the behavior of the doctor. Patients were able to draw the doctor to the computer, and used the computer to challenge doctor's statements. Conclusion This study demonstrates that in consultations where doctors use computers, the computer can legitimately be regarded as part of a triadic relationship. Routine use of computers in the consultation changes the doctor–patient relationship, and is altering the distribution of power and authority between doctor and patient. PMID:21262923

The patient and the computer in the primary care consultation.

PubMed

Pearce, Christopher; Arnold, Michael; Phillips, Christine; Trumble, Stephen; Dwan, Kathryn

2011-01-01

Studies of the doctor-patient relationship have focused on the elaboration of power and/or authority using a range of techniques to study the encounter between doctor and patient. The widespread adoption of computers by doctors brings a third party into the consultation. While there has been some research into the way doctors view and manage this new relationship, the behavior of patients in response to the computer is rarely studied. In this paper, the authors use Goffman's dramaturgy to explore patients' approaches to the doctor's computer in the consultation, and its influence on the patient-doctor relationship. Observational study of Australian general practice. 141 consultations from 20 general practitioners were videotaped and analyzed using a hermeneutic framework. Patients negotiated the relationship between themselves, the doctor, and the computer demonstrating two themes: dyadic (dealing primarily with the doctor) or triadic (dealing with both computer and doctor). Patients used three signaling behaviors in relation to the computer on the doctor's desk (screen watching, screen ignoring, and screen excluding) to influence the behavior of the doctor. Patients were able to draw the doctor to the computer, and used the computer to challenge doctor's statements. This study demonstrates that in consultations where doctors use computers, the computer can legitimately be regarded as part of a triadic relationship. Routine use of computers in the consultation changes the doctor-patient relationship, and is altering the distribution of power and authority between doctor and patient.

Eliminating traditional reference services in an academic health sciences library: a case study

PubMed Central

Schulte, Stephanie J

2011-01-01

Question: How were traditional librarian reference desk services successfully eliminated at one health sciences library? Setting: The analysis was done at an academic health sciences library at a major research university. Method: A gap analysis was performed, evaluating changes in the first eleven months through analysis of reference transaction and instructional session data. Main Results: Substantial increases were seen in the overall number of specialized reference transactions and those conducted by librarians lasting more than thirty minutes. The number of reference transactions overall increased after implementing the new model. Several new small-scale instructional initiatives began, though perhaps not directly related to the new model. Conclusion: Traditional reference desk services were eliminated at one academic health sciences library without negative impact on reference and instructional statistics. Eliminating ties to the confines of the physical library due to staffing reference desk hours removed one significant barrier to a more proactive liaison program. PMID:22022221

The foodscape: classification and field validation of secondary data sources across urban/rural and socio-economic classifications in England

PubMed Central

2012-01-01

Background In recent years, alongside the exponential increase in the prevalence of overweight and obesity, there has been a change in the food environment (foodscape). This research focuses on methods used to measure and classify the foodscape. This paper describes the foodscape across urban/rural and socio-economic divides. It examines the validity of a database of food outlets obtained from Local Authority sources (secondary level & desk based), across urban/rural and socio-economic divides by conducting fieldwork (ground-truthing). Additionally this paper tests the efficacy of using a desk based classification system to describe food outlets, compared with ground-truthing. Methods Six geographically defined study areas were purposively selected within North East England consisting of two Lower Super Output Areas (LSOAs; a small administrative geography) each. Lists of food outlets were obtained from relevant Local Authorities (secondary level & desk based) and fieldwork (ground-truthing) was conducted. Food outlets were classified using an existing tool. Positive predictive values (PPVs) and sensitivity analysis was conducted to explore validation of secondary data sources. Agreement between 'desk' and 'field' based classifications of food outlets were assessed. Results There were 438 food outlets within all study areas; the urban low socio-economic status (SES) area had the highest number of total outlets (n = 210) and the rural high SES area had the least (n = 19). Differences in the types of outlets across areas were observed. Comparing the Local Authority list to fieldwork across the geographical areas resulted in a range of PPV values obtained; with the highest in urban low SES areas (87%) and the lowest in Rural mixed SES (79%). While sensitivity ranged from 95% in the rural mixed SES area to 60% in the rural low SES area. There were no significant associations between field/desk percentage agreements across any of the divides. Conclusion Despite the relatively small number of areas, this work furthers our understanding of the validity of using secondary data sources to identify and classify the foodscape in a variety of geographical settings. While classification of the foodscape using secondary Local Authority food outlet data with information obtained from the internet, is not without its difficulties, desk based classification would be an acceptable alternative to fieldwork, although it should be used with caution. PMID:22472206

Stand Out in Class: restructuring the classroom environment to reduce sedentary behaviour in 9-10-year-olds - study protocol for a pilot cluster randomised controlled trial.

PubMed

Clemes, Stacy A; Bingham, Daniel D; Pearson, Natalie; Chen, Yu-Ling; Edwardson, Charlotte; McEachan, Rosemary; Tolfrey, Keith; Cale, Lorraine; Richardson, Gerry; Fray, Mike; Bandelow, Stephan; Jaicim, Nishal Bhupendra; Salmon, Jo; Dunstan, David; Barber, Sally E

2018-01-01

Sedentary behaviour (sitting) is a highly prevalent negative health behaviour, with individuals of all ages exposed to environments that promote prolonged sitting. Excessive sedentary behaviour adversely affects health in children and adults. As sedentary behaviour tracks from childhood into adulthood, the reduction of sedentary time in young people is key for the prevention of chronic diseases that result from excessive sitting in later life. The sedentary school classroom represents an ideal setting for environmental change, through the provision of sit-stand desks. Whilst the use of sit-stand desks in classrooms demonstrates positive effects in some key outcomes, evidence is currently limited by small samples and/or short intervention durations, with few studies adopting randomised controlled trial (RCT) designs. This paper describes the protocol of a pilot cluster RCT of a sit-stand desk intervention in primary school classrooms. A two-arm pilot cluster RCT will be conducted in eight primary schools (four intervention, four control) with at least 120 year 5 children (aged 9-10 years). Sit-stand desks will replace six standard desks in the intervention classrooms. Teachers will be encouraged to ensure all pupils are exposed to the sit-stand desks for at least 1 h/day on average using a rotation system. Schools assigned to the control arm will continue with their usual practice, no environmental changes will be made to their classrooms. Measurements will be taken at baseline, before randomisation, and at the end of the schools' academic year. In this study, the primary outcomes of interest will be school and participant recruitment and attrition, acceptability of the intervention, and acceptability and compliance to the proposed outcome measures (including activPAL-measured school-time and school-day sitting, accelerometer-measured physical activity, adiposity, blood pressure, cognitive function, academic progress, engagement, and behaviour) for inclusion in a definitive trial. A full process evaluation and an exploratory economic evaluation will also be conducted to further inform a definitive trial. The primary output of this study will be acceptability data to inform the development of a definitive cluster RCT designed to examine the efficacy of this intervention on health- and education-related outcomes in UK primary school children. ISRCTN12915848 (retrospectively registered, date registered 9 November 2016).

Using CLIPS in a distributed system: The Network Control Center (NCC) expert system

NASA Technical Reports Server (NTRS)

Wannemacher, Tom

1990-01-01

This paper describes an intelligent troubleshooting system for the Help Desk domain. It was developed on an IBM-compatible 80286 PC using Microsoft C and CLIPS and an AT&T 3B2 minicomputer using the UNIFY database and a combination of shell script, C programs and SQL queries. The two computers are linked by a lan. The functions of this system are to help non-technical NCC personnel handle trouble calls, to keep a log of problem calls with complete, concise information, and to keep a historical database of problems. The database helps identify hardware and software problem areas and provides a source of new rules for the troubleshooting knowledge base.

Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

PubMed

Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

2018-03-01

After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of the Indonesian National Standard for elementary school furniture based on children's anthropometry.

PubMed

Yanto; Lu, Chih-Wei; Lu, Jun-Ming

2017-07-01

In Indonesia, National Standardization Agency of Indonesia issued the Indonesian National Standard SNI 12-1015-1989 and SNI 12-1016-1989 to define the type of furniture dimensions that should be used by children in the elementary school level. This study aims to examine whether the current national standards for elementary school furniture dimensions issued by National Standardization Agency of Indonesia match the up-to-date Indonesian children's anthropometry. Two types of school furniture, small type (Type I, for grade 1-3) and large type (Type II, for grade 4-6), were evaluated in terms of seat height, seat depth, seat width and backrest height of a chair as well as the height and underneath height of a desk. 1146 students aged between 6 and 12 years old participated in the study. Seven anthropometric measurements were taken including stature, sitting shoulder height, sitting elbow height, popliteal height, buttock-popliteal length, knee height and hip breadth. Based on the standard school furniture dimensions and students' body dimensions, numbers of matches and mismatches between them were computed. Results indicated a substantial degree of mismatch between children's anthropometry and the standard dimensions of school furniture. The standard seat height was not appropriate for students among different grades with the mismatch percentage ranging from 63.4% to 96.7% for Type I and 72.7% to 99.0% for Type II. For desk height, the standard dimensions were not appropriate for students among different grades with the mismatch percentage ranging from 32.3% to 88.9% for Type I and 67.7% to 99.0% for Type II. Apparently, the current standards are out of date and need to be updated. Four different sizes of school furniture were hence proposed to accommodate the variation in students' anthropometry from Grade 1 to Grade 6. The proposed standard dimensions (PrS) of school furniture cover a slightly broader range of age and present a higher cumulative fit than the current standard dimensions (CrS). In addition, a better strategy for sizing can be also developed to fit chairs and desks to a larger number of students. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prototype and Evaluation of AutoHelp: A Case-based, Web-accessible Help Desk System for EOSDIS

NASA Technical Reports Server (NTRS)

Mitchell, Christine M.; Thurman, David A.

1999-01-01

AutoHelp is a case-based, Web-accessible help desk for users of the EOSDIS. Its uses a combination of advanced computer and Web technologies, knowledge-based systems tools, and cognitive engineering to offload the current, person-intensive, help desk facilities at the DAACs. As a case-based system, AutoHelp starts with an organized database of previous help requests (questions and answers) indexed by a hierarchical category structure that facilitates recognition by persons seeking assistance. As an initial proof-of-concept demonstration, a month of email help requests to the Goddard DAAC were analyzed and partially organized into help request cases. These cases were then categorized to create a preliminary case indexing system, or category structure. This category structure allows potential users to identify or recognize categories of questions, responses, and sample cases similar to their needs. Year one of this research project focused on the development of a technology demonstration. User assistance 'cases' are stored in an Oracle database in a combination of tables linking prototypical questions with responses and detailed examples from the email help requests analyzed to date. When a potential user accesses the AutoHelp system, a Web server provides a Java applet that displays the category structure of the help case base organized by the needs of previous users. When the user identifies or requests a particular type of assistance, the applet uses Java database connectivity (JDBC) software to access the database and extract the relevant cases. The demonstration will include an on-line presentation of how AutoHelp is currently structured. We will show how a user might request assistance via the Web interface and how the AutoHelp case base provides assistance. The presentation will describe the DAAC data collection, case definition, and organization to date, as well as the AutoHelp architecture. It will conclude with the year 2 proposal to more fully develop the case base, the user interface (including the category structure), interface with the current DAAC Help System, the development of tools to add new cases, and user testing and evaluation at (perhaps) the Goddard DAAC.

Usage Position and Virtual Keyboard Design Affect Upper-Body Kinematics, Discomfort, and Usability during Prolonged Tablet Typing

PubMed Central

Lin, Ming-I Brandon; Hong, Ruei-Hong; Chang, Jer-Hao; Ke, Xin-Min

2015-01-01

Purpose The increase in tablet usage allows people to perform computer work in non-traditional office environments. The aim of this study was to assess the effects of changes in tablet keyboard design on postures of the upper extremities and neck, discomfort, and usability under different usage positions during prolonged touch-typing. Methods Eighteen healthy participants familiar with touch-screen devices were randomized into three usage positions (desk, lap, and bed) and completed six, 60-minute typing sessions using three virtual keyboard designs (standard, wide, split). Electrogoniometers continuously measured the postures of the wrists, elbow, and neck. Body discomfort and system usability were evaluated by questionnaires before and immediately after each typing session. Results Separate linear mixed effects models on various postural measures and subjective ratings are conducted with usage position as the between-subject factors, keyboard design and typing duration as the with-in subject factors were conducted. Using the tablet in bed led to more extended wrists but a more natural elbow flexion than the desk position. The angled split virtual keyboard significantly reduced the extent of wrist ulnar deviation than the keyboard with either standard or wide design. However, little difference was observed across the usage position and keyboard design. When the postural data were compared between the middle and end of typing sessions, the wrists, elbow, and neck all exhibited a substantially increased range of joint movements (13% to 38%). The discomfort rating also increased significantly over time in every upper body region investigated. Additionally, the split keyboard design received a higher usability rating in the bed position, whereas participants had more satisfactory experience while using the wide keyboard in the traditional desk setting. Conclusions Prolonged use of tablets in non-traditional office environments may result in awkward postures in the upper body that may expose users to greater risks of developing musculoskeletal symptoms. Adequate virtual keyboard designs show the potential to alleviate some postural effects and improve the user experience without changing the tablet form factors. PMID:26629989

An empirical method for computing leeside centerline heating on the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Helms, V. T., III

1981-01-01

An empirical method is presented for computing top centerline heating on the Space Shuttle Orbiter at simulated reentry conditions. It is shown that the Shuttle's top centerline can be thought of as being under the influence of a swept cylinder flow field. The effective geometry of the flow field, as well as top centerline heating, are directly related to oil-flow patterns on the upper surface of the fuselage. An empirical turbulent swept cylinder heating method was developed based on these considerations. The method takes into account the effects of the vortex-dominated leeside flow field without actually having to compute the detailed properties of such a complex flow. The heating method closely predicts experimental heat-transfer values on the top centerline of a Shuttle model at Mach numbers of 6 and 10 over a wide range in Reynolds number and angle of attack.

Parallel processing for scientific computations

NASA Technical Reports Server (NTRS)

Alkhatib, Hasan S.

1995-01-01

The scope of this project dealt with the investigation of the requirements to support distributed computing of scientific computations over a cluster of cooperative workstations. Various experiments on computations for the solution of simultaneous linear equations were performed in the early phase of the project to gain experience in the general nature and requirements of scientific applications. A specification of a distributed integrated computing environment, DICE, based on a distributed shared memory communication paradigm has been developed and evaluated. The distributed shared memory model facilitates porting existing parallel algorithms that have been designed for shared memory multiprocessor systems to the new environment. The potential of this new environment is to provide supercomputing capability through the utilization of the aggregate power of workstations cooperating in a cluster interconnected via a local area network. Workstations, generally, do not have the computing power to tackle complex scientific applications, making them primarily useful for visualization, data reduction, and filtering as far as complex scientific applications are concerned. There is a tremendous amount of computing power that is left unused in a network of workstations. Very often a workstation is simply sitting idle on a desk. A set of tools can be developed to take advantage of this potential computing power to create a platform suitable for large scientific computations. The integration of several workstations into a logical cluster of distributed, cooperative, computing stations presents an alternative to shared memory multiprocessor systems. In this project we designed and evaluated such a system.

THE VERTICAL

NASA Technical Reports Server (NTRS)

Albert, Stephen L.; Spencer, Jeffrey B.

1994-01-01

'THE VERTICAL' computer keyboard is designed to address critical factors which contribute to Repetitive Motion Injuries (RMI) (including Carpal Tunnel Syndrome) in association with computer keyboard usage. This keyboard splits the standard QWERTY design into two halves and positions each half 90 degrees from the desk. In order to access a computer correctly. 'THE VERTICAL' requires users to position their bodies in optimal alignment with the keyboard. The orthopaedically neutral forearm position (with hands palms-in and thumbs-up) reduces nerve compression in the forearm. The vertically arranged keypad halves ameliorate onset occurrence of keyboard-associated RMI. By utilizing visually-reference mirrored mylar surfaces adjustable to the user's eye, the user is able to readily reference any key indicia (reversed) just as they would on a conventional keyboard. Transverse adjustability substantially reduces cumulative musculoskeletal discomfort in the shoulders. 'THE VERTICAL' eliminates the need for an exterior mouse by offering a convenient finger-accessible curser control while the hands remain in the vertically neutral position. The potential commercial application for 'THE VERTICAL' is enormous since the product can effect every person who uses a computer anywhere in the world. Employers and their insurance carriers are spending hundreds of millions of dollars per year as a result of RMI. This keyboard will reduce the risk.

Educational Technology Research Journals: "Journal of Educational Computing Research," 2003-2012

ERIC Educational Resources Information Center

Nyland, Rob; Anderson, Noelle; Beckstrom, Tyler; Boren, Michael; Thomas, Rebecca; West, Richard E.

2015-01-01

This article analyzes articles published in the "Journal of Educational Computing Research" ("JECR") from 2003 to 2012. The authors analyzed the articles looking for trends in article types and methodologies, the most common topics addressed in the articles, the top-cited articles, and the top authors during the period. The…

An investigation of the effects of touchpad location within a notebook computer.

PubMed

Kelaher, D; Nay, T; Lawrence, B; Lamar, S; Sommerich, C M

2001-02-01

This study evaluated effects of the location of a notebook computer's integrated touchpad, complimenting previous work in the area of desktop mouse location effects. Most often integrated touchpads are located in the computer's wrist rest, and centered on the keyboard. This study characterized effects of this bottom center location and four alternatives (top center, top right, right side, and bottom right) upon upper extremity posture, discomfort, preference, and performance. Touchpad location was found to significantly impact each of those measures. The top center location was particularly poor, in that it elicited more ulnar deviation, more shoulder flexion, more discomfort, and perceptions of performance impedance. In general, the bottom center, bottom right, and right side locations fared better, though subjects' wrists were more extended in the bottom locations. Suggestions for notebook computer design are provided.

Single service point: it's all in the design.

PubMed

Bradigan, Pamela S; Rodman, Ruey L

2008-01-01

"Design thinking" principles from a leading design firm, IDEO, were key elements in the planning process for a one-desk service model, the ASK Desk, at the John A. Prior Health Sciences Library. The library administration and staff employed the methodology to enhance customer experiences, meet technology challenges, and compete in a changing education environment. The most recent renovations demonstrate how the principles were applied. The concept of "continuous design thinking" is important in the library's daily operations to serve customers most effectively.

The Assessment of Military Multitasking Performance: Validation of a Dual-Task and Multitask Protocol

DTIC Science & Technology

2015-11-01

handwriting .  Return all supplies and materials to their original locations and place the footstool on the CQ desk (touch the desk surface) at the end...and seconds between when the examiner says , “Start” and when the participant a) reports to SPC Smith/Guard Shack that he/she is finished with the...abbreviation of the first work area the subject enters after the examiner says , “start”. For 2. To_____ write the abbreviation for the work

Conference on Singlet Molecular Oxygen (COSMO 84) Held at Clearwater, Beach, Florida on 4-7 January 1984. Program and Abstracts.

DTIC Science & Technology

1984-09-24

BREAKS will be announced by the SESSION CHAIRMAN. 6. LOCAL INFORMATION may be obtained at the HILTON REGISTRATION DESK or the LOBBY REGISTRATION DESK...carotene and laser flash photolysis experiments to determine the rates of quenching of 3 BChl a by oxygen, $-carotene#,3 tetracene and pentacene . References...with the tumor localizing and photosensitizing constituent of HPD strongly suggests that the in situ "’ * tumor sensitizer in photoradiation therapy is

The impact of stand-biased desks in classrooms on calorie expenditure in children.

PubMed

Benden, Mark E; Blake, Jamilia J; Wendel, Monica L; Huber, John C

2011-08-01

Childhood obesity is a public health concern with significant health and economic impacts. We conducted a prospective experimental study in 4 classrooms in central Texas to determine the effect of desks that encourage standing rather than sitting on caloric expenditure in children. Students were monitored with calorie expenditure-measuring arm-bands worn for 10 days in the fall and spring. The treatment group experienced significant increases in calorie expenditure over the control group, a finding that has implications for policy and practice.

NNLO corrections to top pair production at hadron colliders: the quark-gluon reaction

NASA Astrophysics Data System (ADS)

Czakon, Michal; Mitov, Alexander

2013-01-01

We compute the next-to-next-to-leading order QCD correction to the total inclusive top pair production cross-section in the reaction qgto toverline{t}+X . We find moderate {O} (1%) correction to central values at both Tevatron and LHC. The scale variation of the cross-section remains unchanged at the Tevatron and is significantly reduced at the LHC. We find that recently introduced approximation based on the high-energy limit of the top pair cross-section significantly deviates from the exact result. The results derived in the present work are included in version 1.4 of the program Top++. Work towards computing the reaction ggto toverline{t}+X is ongoing.

The Weekly Fab Five: Things You Should Do Every Week To Keep Your Computer Running in Tip-Top Shape.

ERIC Educational Resources Information Center

Crispen, Patrick

2001-01-01

Describes five steps that school librarians should follow every week to keep their computers running at top efficiency. Explains how to update virus definitions; run Windows update; run ScanDisk to repair errors on the hard drive; run a disk defragmenter; and backup all data. (LRW)

Significant OH production under surface cleaning and air cleaning conditions: Impact on indoor air quality.

PubMed

Carslaw, N; Fletcher, L; Heard, D; Ingham, T; Walker, H

2017-11-01

We report measurements of hydroxyl (OH) and hydroperoxy (HO 2 ) radicals made by laser-induced fluorescence spectroscopy in a computer classroom (i) in the absence of indoor activities (ii) during desk cleaning with a limonene-containing cleaner (iii) during operation of a commercially available "air cleaning" device. In the unmanipulated environment, the one-minute averaged OH concentration remained close to or below the limit of detection (6.5×10 5  molecule cm -3 ), whilst that of HO 2 was 1.3×10 7  molecule cm -3 . These concentrations increased to ~4×10 6 and 4×10 8  molecule cm -3 , respectively during desk cleaning. During operation of the air cleaning device, OH and HO 2 concentrations reached ~2×10 7 and ~6×10 8  molecule cm -3 respectively. The potential of these OH concentrations to initiate chemical processing is explored using a detailed chemical model for indoor air (the INDCM). The model can reproduce the measured OH and HO 2 concentrations to within 50% and often within a few % and demonstrates that the resulting secondary chemistry varies with the cleaning activity. Whilst terpene reaction products dominate the product composition following surface cleaning, those from aromatics and other VOCs are much more important during the use of the air cleaning device. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Correlation between both neck/shoulder and low back pain and daily behavioral habits among middle school students in Shenzhen].

PubMed

Zhou, L; Huang, Y Y; Chen, D Y; Zhang, D; Luo, Q S; Wang, Y; Wu, Y

2018-04-10

Objective: To study the relations between neck/shoulder or low back pain and their daily behavioral habits among middle school students in Shenzhen. Methods: We randomly chose 3 952 students from 10 high schools in Shenzhen to complete the questionnaires. Data was gathered and analyzed, using the IBM SPSS 23.0. Results: Of the 3 952 participants, 20.3% had neck/shoulder pain and 15.2% had low back pain. Among students experienced neck/shoulder pain, female (25.3%), high school (24.5%) and boarding students (24.4%) experienced higher rates of neck/shoulder pain ( P <0.05). Female students (17.9%) also had higher rate of low back pain ( P <0.05). Results from logistic regression analysis showed that factors as: gender, type of school, taking naps on the desk, staying up late, self-perceived stress from learning, overloading homework, time spent on mobile phone and TV, spending long time on computer etc . were related to the neck/shoulder pain ( P <0.05). Factors as: gender, naps on the desk, stay up late, self-perceived stress, overloading homework, time spent on mobile phone and TV etc. , were related to low back pain ( P <0.05). Conclusion: Neck/shoulder pain and low back pain were both commonly seen while high self-perceived stress, sedentary behaviors and poor sleeping habits were associated with both neck/shoulder and low back pain in high school students in Shenzhen.

Total and domain-specific sitting time among employees in desk-based work settings in Australia.

PubMed

Bennie, Jason A; Pedisic, Zeljko; Timperio, Anna; Crawford, David; Dunstan, David; Bauman, Adrian; van Uffelen, Jannique; Salmon, Jo

2015-06-01

To describe the total and domain-specific daily sitting time among a sample of Australian office-based employees. In April 2010, paper-based surveys were provided to desk-based employees (n=801) in Victoria, Australia. Total daily and domain-specific (work, leisure-time and transport-related) sitting time (minutes/day) were assessed by validated questionnaires. Differences in sitting time were examined across socio-demographic (age, sex, occupational status) and lifestyle characteristics (physical activity levels, body mass index [BMI]) using multiple linear regression analyses. The median (95% confidence interval [CI]) of total daily sitting time was 540 (531-557) minutes/day. Insufficiently active adults (median=578 minutes/day, [95%CI: 564-602]), younger adults aged 18-29 years (median=561 minutes/day, [95%CI: 540-577]) reported the highest total daily sitting times. Occupational sitting time accounted for almost 60% of total daily sitting time. In multivariate analyses, total daily sitting time was negatively associated with age (unstandardised regression coefficient [B]=-1.58, p<0.001) and overall physical activity (minutes/week) (B=-0.03, p<0.001) and positively associated with BMI (B=1.53, p=0.038). Desk-based employees reported that more than half of their total daily sitting time was accrued in the work setting. Given the high contribution of occupational sitting to total daily sitting time among desk-based employees, interventions should focus on the work setting. © 2014 Public Health Association of Australia.

Computer-associated health complaints and sources of ergonomic instructions in computer-related issues among Finnish adolescents: a cross-sectional study.

PubMed

Hakala, Paula T; Saarni, Lea A; Ketola, Ritva L; Rahkola, Erja T; Salminen, Jouko J; Rimpelä, Arja H

2010-01-11

The use of computers has increased among adolescents, as have musculoskeletal symptoms. There is evidence that these symptoms can be reduced through an ergonomics approach and through education. The purpose of this study was to examine where adolescents had received ergonomic instructions related to computer use, and whether receiving these instructions was associated with a reduced prevalence of computer-associated health complaints. Mailed survey with nationally representative sample of 12 to 18-year-old Finns in 2001 (n = 7292, response rate 70%). In total, 6961 youths reported using a computer. We tested the associations of computer use time and received ergonomic instructions (predictor variables) with computer-associated health complaints (outcome variables) using logistic regression analysis. To prevent computer-associated complaints, 61.2% reported having been instructed to arrange their desk/chair/screen in the right position, 71.5% to take rest breaks. The older age group (16-18 years) reported receiving instructions or being self-instructed more often than the 12- to 14-year-olds (p < 0.001). Among both age groups the sources of instructions included school (33.1%), family (28.6%), self (self-instructed) (12.5%), ICT-related (8.6%), friends (1.5%) and health professionals (0.8%). Receiving instructions was not related to lower prevalence of computer-associated health complaints. This report shows that ergonomic instructions on how to prevent computer-related musculoskeletal problems fail to reach a substantial number of children. Furthermore, the reported sources of instructions vary greatly in terms of reliability.

Computer-associated health complaints and sources of ergonomic instructions in computer-related issues among Finnish adolescents: A cross-sectional study

PubMed Central

2010-01-01

Background The use of computers has increased among adolescents, as have musculoskeletal symptoms. There is evidence that these symptoms can be reduced through an ergonomics approach and through education. The purpose of this study was to examine where adolescents had received ergonomic instructions related to computer use, and whether receiving these instructions was associated with a reduced prevalence of computer-associated health complaints. Methods Mailed survey with nationally representative sample of 12 to 18-year-old Finns in 2001 (n = 7292, response rate 70%). In total, 6961 youths reported using a computer. We tested the associations of computer use time and received ergonomic instructions (predictor variables) with computer-associated health complaints (outcome variables) using logistic regression analysis. Results To prevent computer-associated complaints, 61.2% reported having been instructed to arrange their desk/chair/screen in the right position, 71.5% to take rest breaks. The older age group (16-18 years) reported receiving instructions or being self-instructed more often than the 12- to 14-year-olds (p < 0.001). Among both age groups the sources of instructions included school (33.1%), family (28.6%), self (self-instructed) (12.5%), ICT-related (8.6%), friends (1.5%) and health professionals (0.8%). Receiving instructions was not related to lower prevalence of computer-associated health complaints. Conclusions This report shows that ergonomic instructions on how to prevent computer-related musculoskeletal problems fail to reach a substantial number of children. Furthermore, the reported sources of instructions vary greatly in terms of reliability. PMID:20064250

The Impact of Stand-Biased Desks in Classrooms on Calorie Expenditure in Children

PubMed Central

Benden, Mark E.; Blake, Jamilia J.; Huber, John C.

2011-01-01

Childhood obesity is a public health concern with significant health and economic impacts. We conducted a prospective experimental study in 4 classrooms in central Texas to determine the effect of desks that encourage standing rather than sitting on caloric expenditure in children. Students were monitored with calorie expenditure–measuring arm-bands worn for 10 days in the fall and spring. The treatment group experienced significant increases in calorie expenditure over the control group, a finding that has implications for policy and practice. PMID:21421945

The Most Efficient Organization: A Strategic Issue Management Case Study

DTIC Science & Technology

1991-12-01

let’s discuss any problems or concerns specific to PWD, NAS Kensington. I am particularly interested in this package on my desk." "Yes sir," replied...explanation of the OMB A-76 program see Exhibit 1-5.) "The package on your desk contains the outcome of the last five years, and CDR Atwood’s (previous PWO...recommendation for the department’s MEO (Exhibit 1-6). The deadline for submission of the final package is only a few months away." During his first few

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The model is designed to enable decision makers to compare the economics of geothermal projects with the economics of alternative energy systems at an early stage in the decision process. The geothermal engineering and economic feasibility computer model (GEEF) is written in FORTRAN IV language and can be run on a mainframe or a mini-computer system. An abbreviated version of the model is being developed for usage in conjunction with a programmable desk calculator. The GEEF model has two main segments, namely (i) the engineering design/cost segment and (ii) the economic analysis segment. In the engineering segment, the model determinesmore » the numbers of production and injection wells, heat exchanger design, operating parameters for the system, requirement of supplementary system (to augment the working fluid temperature if the resource temperature is not sufficiently high), and the fluid flow rates. The model can handle single stage systems as well as two stage cascaded systems in which the second stage may involve a space heating application after a process heat application in the first stage.« less

Characterization of posture and comfort in laptop users in non-desk settings.

PubMed

Gold, J E; Driban, J B; Yingling, V R; Komaroff, E

2012-03-01

Laptop computers may be used in a variety of postures not coupled to the office workstation. Using passive motion analysis, this study examined mean joint angles during a short typing/editing task in college students (n=20), in up to seven positions. Comfort was assessed after task execution through a body map. For three required postures, joint angles in a prone posture were different than those while seated at a couch with feet either on floor or on ottoman. Specifically, the prone posture was characterized by comparatively non-neutral shoulders, elbows and wrists, and pronounced neck extension. Significantly greater intensity and more regions of discomfort were marked for the prone posture than for the seated postures. It is recommended that the prone posture only be assumed briefly during laptop use. Exposure to laptops outside of the office setting should be assessed in future epidemiologic studies of musculoskeletal complaints and computer use. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

NASAwide electronic publishing system-prototype STI electronic document distribution: Stage-4 evaluation report. Part 2; Appendices

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual framework, functional description, and technical report server of the Scientific and Technical Information (STI) Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware. and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices consist of (A) the STI EDD Project Plan, (B) Team members, (C) Phasing Schedules, (D) Accessing On-line Reports, and (E) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desk top publishing systems, and technical report servers, to be able to provide to NASA's engineers, researchers, scientists, and external users, the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

The Effects of Computer-Assisted Instruction Based on Top-Level Structure Method in English Reading and Writing Abilities of Thai EFL Students

ERIC Educational Resources Information Center

Jinajai, Nattapong; Rattanavich, Saowalak

2015-01-01

This research aims to study the development of ninth grade students' reading and writing abilities and interests in learning English taught through computer-assisted instruction (CAI) based on the top-level structure (TLS) method. An experimental group time series design was used, and the data was analyzed by multivariate analysis of variance…

Desk-based workers' perspectives on using sit-stand workstations: a qualitative analysis of the Stand@Work study.

PubMed

Chau, Josephine Y; Daley, Michelle; Srinivasan, Anu; Dunn, Scott; Bauman, Adrian E; van der Ploeg, Hidde P

2014-07-25

Prolonged sitting time has been identified as a health risk factor. Sit-stand workstations allow desk workers to alternate between sitting and standing throughout the working day, but not much is known about their acceptability and feasibility. Hence, the aim of this study was to qualitatively evaluate the acceptability, feasibility and perceptions of using sit-stand workstations in a group of desk-based office workers. This article describes the qualitative evaluation of the randomized controlled cross-over Stand@Work pilot trial. Participants were adult employees recruited from a non-government health agency in Sydney, Australia. The intervention involved using an Ergotron Workfit S sit-stand workstation for four weeks. After the four week intervention, participants shared their perceptions and experiences of using the sit-stand workstation in focus group interviews with 4-5 participants. Topics covered in the focus groups included patterns of workstation use, barriers and facilitators to standing while working, effects on work performance, physical impacts, and feasibility in the office. Focus group field notes and transcripts were analysed in an iterative process during and after the data collection period to identify the main concepts and themes. During nine 45-min focus groups, a total of 42 participants were interviewed. Participants were largely intrinsically motivated to try the sit-stand workstation, mostly because of curiosity to try something new, interest in potential health benefits, and the relevance to the participant's own and organisation's work. Most participants used the sit-stand workstation and three common usage patterns were identified: task-based routine, time-based routine, and no particular routine. Common barriers to sit-stand workstation use were working in an open plan office, and issues with sit-stand workstation design. Common facilitators of sit-stand workstation use were a supportive work environment conducive to standing, perceived physical health benefits, and perceived work benefits. When prompted, most participants indicated they were interested in using a sit-stand workstation in the future. The use of a sit-stand workstation in this group of desk-based office workers was generally perceived as acceptable and feasible. Future studies are needed to explore this in different desk-based work populations and settings.

Comparison of commonly used orthopaedic outcome measures using palm-top computers and paper surveys.

PubMed

Saleh, Khaled J; Radosevich, David M; Kassim, Rida A; Moussa, Mohamed; Dykes, Darrell; Bottolfson, Helena; Gioe, Terence J; Robinson, Harry

2002-11-01

Measuring patient-perceived outcomes following orthopaedic procedures have become an important component of clinical research and patient care. General and disease-specific outcomes measures have been developed and applied in orthopaedics to assess the patients' perceived health status. Unfortunately, paper-based, self-administered instruments remain inefficient for collecting data because of: (a) missing data (b) respondent error, and (c) the costs to administer and enter data. To study the comparability of palm-top computer devices and paper-pencil self-administered questionnaires in the collection of health-related quality of life (HRQL) information from patients. The comparability of administering HRQL questionnaires using palm-top computer and traditional paper-based forms was tested in a sample of 96 patients with complaints of hip and/or knee pain. Each patient completed mailed versions of the Medical Outcomes Study (MOS), 36-item Health Survey (SF-36), and Western Ontario and McMasters University Arthritis Index (WOMAC) three weeks prior to presenting to clinic. At the clinic they were asked to complete the same outcomes measures using the palm-top computer or a paper-and-pencil version. In the analysis, scale distributions, floor and ceiling effects, internal consistency and retest reliability of scales were compared across the two data collection methods. Because the baseline characteristics of the groups were not strictly comparable according to age, the data were analyzed for the entire sample and stratified according to age. Few statistically significant differences were found for the means, variances and intra-class correlation coefficients between the methods of administration. While the scale distribution between the two methods was comparable, the internal consistency of the scales was dissimilar. Administration of HRQL questionnaires using portable palm-top computer devices has the potential advantage of decreased cost and convenience. These data lend some support for the comparability of palm-top computers and paper surveys for outcomes measures widely used in the field of orthopaedic surgery. The present study identified the lack of reliability across modes of administration that requires further study in a randomized comparability trial. These mode effects are important for orthopaedic surgeons to appreciate before implementing innovative data-capture technologies in their practices.

Workplace interventions for reducing sitting at work.

PubMed

Shrestha, Nipun; Kukkonen-Harjula, Katriina T; Verbeek, Jos H; Ijaz, Sharea; Hermans, Veerle; Bhaumik, Soumyadeep

2016-03-17

Office work has changed considerably over the previous couple of decades and has become sedentary in nature. Physical inactivity at workplaces and particularly increased sitting has been linked to increase in cardiovascular disease, obesity and overall mortality. To evaluate the effects of workplace interventions to reduce sitting at work compared to no intervention or alternative interventions. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, CINAHL, OSH UPDATE, PsycINFO, Clinical trials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) search portal up to 2 June, 2015. We also screened reference lists of articles and contacted authors to find more studies to include. We included randomised controlled trials (RCTs), cluster-randomised controlled trials (cRCTs), and quasi-randomised controlled trials of interventions to reduce sitting at work. For changes of workplace arrangements, we also included controlled before-and-after studies (CBAs) with a concurrent control group. The primary outcome was time spent sitting at work per day, either self-reported or objectively measured by means of an accelerometer-inclinometer. We considered energy expenditure, duration and number of sitting episodes lasting 30 minutes or more, work productivity and adverse events as secondary outcomes. Two review authors independently screened titles, abstracts and full-text articles for study eligibility. Two review authors independently extracted data and assessed risk of bias. We contacted authors for additional data where required. We included 20 studies, two cross-over RCTs, 11 RCTs, three cRCTs and four CBAs, with a total of 2180 participants from high income nations. The studies evaluated physical workplace changes (nine studies), policy changes (two studies), information and counselling (seven studies) and interventions from multiple categories (two studies). One study had both physical workplace changes and information and counselling components. We did not find any studies that had investigated the effect of periodic breaks or standing or walking meetings. Physical workplace changesA sit-stand desk alone compared to no intervention reduced sitting time at work per workday with between thirty minutes to two hours at short term (up to three months) follow-up (six studies, 218 participants, very low quality evidence). In two studies, sit-stand desks with additional counselling reduced sitting time at work in the same range at short-term follow-up (61 participants, very low quality evidence). One study found a reduction at six months' follow-up of -56 minutes (95% CI -101 to -12, very low quality evidence) compared to no intervention. Also total sitting time at work and outside work decreased with sit-stand desks compared to no intervention (MD -78 minutes, 95% CI -125 to -31, one study) as did the duration of sitting episodes lasting 30 minutes or more (MD -52 minutes, 95% CI -79 to -26, two studies). This is considerably less than the two to four hours recommended by experts. Sit-stand desks did not have a considerable effect on work performance, musculoskeletal symptoms or sick leave. It remains unclear if standing can repair the harms of sitting because there is hardly any extra energy expenditure.The effects of active workstations were inconsistent. Treadmill desks combined with counselling reduced sitting time at work (MD -29 minutes, 95% CI -55 to -2, one study) compared to no intervention at 12 weeks' follow-up. Pedalling workstations combined with information did not reduce inactive sitting at work considerably (MD -12 minutes, 95% CI -24 to 1, one study) compared to information alone at 16 weeks' follow-up. The quality of evidence was low for active workstations. Policy changesTwo studies with 443 participants provided low quality evidence that walking strategies did not have a considerable effect on workplace sitting time at 10 weeks' (MD -16 minutes, 95% CI -54 to 23) or 21 weeks' (MD -17 minutes, 95% CI -58 to 25) follow-up respectively. Information and counsellingCounselling reduced sitting time at work (MD -28 minutes, 95% CI -52 to -5, two studies, low quality evidence) at medium term (three months to 12 months) follow-up. Mindfulness training did not considerably reduce workplace sitting time (MD -2 minutes, 95% CI -22 to 18) at six months' follow-up and at 12 months' follow-up (MD -16 minutes, 95% CI -45 to 12, one study, low quality evidence). There was no considerable increase in work engagement with counselling.There was an inconsistent effect of computer prompting on sitting time at work. One study found no considerable effect on sitting at work (MD -17 minutes, 95% CI -48 to 14, low quality evidence) at 10 days' follow-up, while another study reported a significant reduction in sitting at work (MD -55 minutes, 95% CI -96 to -14, low quality evidence) at 13 weeks' follow-up. Computer prompts to stand reduced sitting at work by 14 minutes more (95% CI 10 to 19, one study) compared to computer prompts to step at six days' follow-up. Computer prompts did not change the number of sitting episodes that last 30 minutes or longer. Interventions from multiple categories Interventions combining multiple categories had an inconsistent effect on sitting time at work, with a reduction in sitting time at 12 weeks' (25 participants, very low quality evidence) and six months' (294 participants, low quality evidence) follow-up in two studies but no considerable effect at 12 months' follow-up in one study (MD -47.98, 95% CI -103 to 7, 294 participants, low quality evidence). At present there is very low to low quality evidence that sit-stand desks may decrease workplace sitting between thirty minutes to two hours per day without having adverse effects at the short or medium term. There is no evidence on the effects in the long term. There were no considerable or inconsistent effects of other interventions such as changing work organisation or information and counselling. There is a need for cluster-randomised trials with a sufficient sample size and long term follow-up to determine the effectiveness of different types of interventions to reduce objectively measured sitting time at work.

TOP500 Supercomputers for June 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack

2004-06-23

23rd Edition of TOP500 List of World's Fastest Supercomputers Released: Japan's Earth Simulator Enters Third Year in Top Position MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a closely watched event in the world of high-performance computing, the 23rd edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2004) at the International Supercomputer Conference in Heidelberg, Germany.

Forum outlines top emerging technologies

NASA Astrophysics Data System (ADS)

Extance, Andy

2015-04-01

Additive manufacturing, next-generation robotics, "sense and avoid" drones that fly themselves, artificial intelligence and "neuromorphic" computing have all made it into the World Economic Forum's top 10 emerging technologies for 2015.

Femoral articular shape and geometry. A three-dimensional computerized analysis of the knee.

PubMed

Siu, D; Rudan, J; Wevers, H W; Griffiths, P

1996-02-01

An average, three-dimensional anatomic shape and geometry of the distal femur were generated from x-ray computed tomography data of five fresh asymptomatic cadaver knees using AutoCAD (AutoDesk, Sausalito, CA), a computer-aided design and drafting software. Each femur model was graphically repositioned to a standardized orientation using a series of alignment templates and scaled to a nominal size of 85 mm in mediolateral and 73 mm in anteroposterior dimensions. An average generic shape of the distal femur was synthesized by combining these pseudosolid models and reslicing the composite structure at different elevations using clipping and smoothing techniques in interactive computer graphics. The resulting distal femoral geometry was imported into a computer-aided manufacturing system, and anatomic prototypes of the distal femur were produced. Quantitative geometric analyses of the generic femur in the coronal and transverse planes revealed definite condylar camber (3 degrees-6 degrees) and toe-in (8 degrees-10 degrees) with an oblique patellofemoral groove (15 degrees) with respect to the mechanical axis of the femur. In the sagittal plane, each condyle could be approximated by three concatenated circular arcs (anterior, distal, and posterior) with slope continuity and a single arc for the patellofemoral groove. The results of this study may have important implications in future femoral prosthesis design and clinical applications.

Heat-driven liquid metal cooling device for the thermal management of a computer chip

NASA Astrophysics Data System (ADS)

Ma, Kun-Quan; Liu, Jing

2007-08-01

The tremendous heat generated in a computer chip or very large scale integrated circuit raises many challenging issues to be solved. Recently, liquid metal with a low melting point was established as the most conductive coolant for efficiently cooling the computer chip. Here, by making full use of the double merits of the liquid metal, i.e. superior heat transfer performance and electromagnetically drivable ability, we demonstrate for the first time the liquid-cooling concept for the thermal management of a computer chip using waste heat to power the thermoelectric generator (TEG) and thus the flow of the liquid metal. Such a device consumes no external net energy, which warrants it a self-supporting and completely silent liquid-cooling module. Experiments on devices driven by one or two stage TEGs indicate that a dramatic temperature drop on the simulating chip has been realized without the aid of any fans. The higher the heat load, the larger will be the temperature decrease caused by the cooling device. Further, the two TEGs will generate a larger current if a copper plate is sandwiched between them to enhance heat dissipation there. This new method is expected to be significant in future thermal management of a desk or notebook computer, where both efficient cooling and extremely low energy consumption are of major concern.

Use of a wireless local area network in an orthodontic clinic.

PubMed

Mupparapu, Muralidhar; Binder, Robert E; Cummins, John M

2005-06-01

Radiographic images and other patient records, including medical histories, demographics, and health insurance information, can now be stored digitally and accessed via patient management programs. However, digital image acquisition and diagnosis and treatment planning are independent tasks, and each is time consuming, especially when performed at different computer workstations. Networking or linking the computers in an office enhances access to imaging and treatment planning tools. Access can be further enhanced if the entire network is wireless. Thanks to wireless technology, stand-alone, desk-bound personal computers have been replaced with mobile, hand-held devices that can communicate with each other and the rest of the world via the Internet. As with any emerging technology, some issues should be kept in mind when adapting to the wireless environment. Foremost is network security. Second is the choice of mobile hardware devices that are used by the orthodontist, office staff, and patients. This article details the standards and choices in wireless technology that can be implemented in an orthodontic clinic and suggests how to select suitable mobile hardware for accessing or adding data to a preexisting network. The network security protocols discussed comply with HIPAA regulations and boost the efficiency of a modern orthodontic clinic.

Computer applications in the search for unrelated stem cell donors.

PubMed

Müller, Carlheinz R

2002-08-01

The majority of patients which are eligible for a blood stem cell transplantation from an allogeneic donor do not have a suitable related donor so that an efficient unrelated donor search is a prerequisite for this treatment. Currently, there are over 7 million volunteer donors in the files of 50 registries in the world and in most countries the majority of transplants are performed from a foreign donor. Evidently, computer and communication technology must play a crucial role in the complex donor search process on the national and international level. This article describes the structural elements of the donor search process and discusses major systematic and technical issues to be addressed in the development and evolution of the supporting telematic systems. The theoretical considerations are complemented by a concise overview over the current state of the art which is given by describing the scope, relevance, interconnection and technical background of three major national and international computer appliances: The German Marrow Donor Information System (GERMIS) and the European Marrow Donor Information System (EMDIS) are interoperable business-to-business e-commerce systems and Bone Marrow Donors World Wide (BMDW) is the basic international donor information desk on the web.

Determination of pain in musculoskeletal system reported by office workers and the pain risk factors.

PubMed

Celik, Sevim; Celik, Kadir; Dirimese, Elif; Taşdemir, Nurten; Arik, Tarik; Büyükkara, İbrahim

2018-01-01

This research was conducted as a cross-sectional descriptive study aimed at determining the existence of pain in the musculoskeletal system among office workers and the reasons for it. The sample consisted of 528 office workers. Collection of data was achieved using a questionnaire prepared by the researchers in line with information from the literature. The male and female office workers most frequently complained of pain in the lower back (55.1%), neck (52.5%) and back (53%). It was seen that out of the variables relating to the work environment, those which had the most significant effect on muscular-skeletal system pain were sitting at the desk for a long time without a break, working sitting on a chair that supported only the lumbar area and the arms, having the computer mouse at a distance from the keyboard, having the head inclined at 45° when working, working holding both forearms above the level of the desk, not taking exercise in daily life, and having a moderate or extremely stressful workplace (p < 0.05). The conclusion has been reached in this study that in order for office workers not to suffer musculoskeletal system pain, it is very important that the working environment should be ergonomically arranged and that various measures should be taken to ensure healthy life behavior. Int J Occup Med Environ Health 2018;31(1):91-111. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Computational design and experimental validation of new thermal barrier systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Shengmin

2015-03-31

The focus of this project is on the development of a reliable and efficient ab initio based computational high temperature material design method which can be used to assist the Thermal Barrier Coating (TBC) bond-coat and top-coat design. Experimental evaluations on the new TBCs are conducted to confirm the new TBCs’ properties. Southern University is the subcontractor on this project with a focus on the computational simulation method development. We have performed ab initio density functional theory (DFT) method and molecular dynamics simulation on screening the top coats and bond coats for gas turbine thermal barrier coating design and validationmore » applications. For experimental validations, our focus is on the hot corrosion performance of different TBC systems. For example, for one of the top coatings studied, we examined the thermal stability of TaZr 2.75O 8 and confirmed it’s hot corrosion performance.« less

Blood pressure monitor with a position sensor for wrist placement to eliminate hydrostatic pressure effect on blood pressure measurement.

PubMed

Sato, Hironori; Koshimizu, Hiroshi; Yamashita, Shingo; Ogura, Toshihiko

2013-01-01

Accurate measurement of blood pressure at wrist requires the heart and wrist to be kept at the same level to avoid the effects of hydrostatic pressure. Although a blood pressure monitor with a position sensor that guides appropriate forearm angle without use of a chair and desk has already been proposed, a similar functioning device for measuring upper arm blood pressure with a chair and desk is needed. In this study, a calculation model was first used to explore design of such a system. The findings were then implemented into design of a new blood pressure monitor. Results of various methods were compared. The calculation model of the wrist level from arthrosis angles and interarticulars lengths was developed and considered using published anthropometric dimensions. It is compared with 33 volunteer persons' experimental results. The calculated difference of level was -4.1 to 7.9 (cm) with a fixed chair and desk. The experimental result was -3.0 to 5.5 (cm) at left wrist and -2.1 to 6.3(cm) at right wrist. The absolute difference level equals ±4.8 (mmHg) of blood pressure readings according to the calculated result. This meets the AAMI requirements for a blood pressure monitor. In the conclusion, the calculation model is able to effectively evaluate the difference between the heart and wrist level. Improving the method for maintaining wrist to heart level will improve wrist blood pressure measurement accuracy when also sitting in the chair at a desk. The leading angle of user's forearm using a position sensor is shown to work for this purpose.

The position of the arm during blood pressure measurement in sitting position.

PubMed

Adiyaman, Ahmet; Verhoeff, Rutger; Lenders, Jacques W M; Deinum, Jaap; Thien, Theo

2006-12-01

Determining the influence of the position of the arm on blood pressure measurement in the sitting position. Blood pressure of 128 individuals (the majority being treated hypertensive patients) visiting the outpatient clinic was measured simultaneously on both arms with arms in two different positions. First, both arms were placed at the chair support level and blood pressure was measured three times on both arms after 10 min of rest. Subsequently, while still remaining in the same sitting position, five blood pressure measurements were made simultaneously at both arms with one arm placed on the desk and one arm placed and supported at heart level (mid-sternal). The arm placed at heart level served as the reference arm. The choice of which arm was placed at desk level and which arm was placed at heart level was randomized. Both at desk level and at chair support level, mean (+/-SD) systolic and diastolic blood pressures were higher than blood pressure at heart level by 6.1/5.7+/-4.6/3.1 and 9.3/9.4+/-5.4/3.4 mmHg, respectively. The effect of the height differences between the arm positions on the blood pressure readings was smaller than predicted (0.49 mmHg/cm systolic and 0.47 mmHg/cm diastolic). No significant correlation was found between blood pressure difference in the different arm positions (desk and heart level) and age, sex, weight or baseline blood pressure. Different arm positions below heart level have significant effects on blood pressure readings. The leading guidelines about arm position during blood pressure measurement are not in accordance with the arm position used in the Framingham study, the most frequently used study for risk estimations.

Clinical Evaluation of Reading Performance Using the Salzburg Reading Desk With a Refractive Rotational Asymmetric Multifocal Intraocular Lens.

PubMed

Linz, Katharina; Attia, Mary S A; Khoramnia, Ramin; Tandogan, Tamer; Kretz, Florian T; Auffarth, Gerd Uwe

2016-08-01

To evaluate functional results and reading performance using the Salzburg Reading Desk after implantation of a sector-shaped near-embedded, rotational asymmetrical multifocal intraocular lens (IOL) and a multifocal toric IOL with a +3.00 diopter (D) near addition. In a prospective study, the LentisMplus and Mplus toric IOLs (Oculentis GmbH, Berlin, Germany) were implanted in 34 eyes of 18 patients at the University Eye Hospital of Heidelberg. Uncorrected and corrected distance visual acuity (UDVA, CDVA) and uncorrected and corrected near visual acuity (UNVA, CNVA) were evaluated using standardized visual acuity charts (ETDRS). The Salzburg Reading Desk was used to analyze unilateral and bilateral uncorrected and corrected reading acuity, reading distance, reading speed, and the smallest log-scaled print size that could be read effectively at a set (40 cm/80 cm) and subjective chosen near and intermediate distance. Postoperatively, the median UDVA was 0.08 logMAR (20/25 Snellen) and the median CDVA was 0.01 logMAR (20/20 Snellen). The median UNVA was 0.12 logMAR (20/25 Snellen) and the median CNVA was 0.03 logMAR (20/20 Snellen). The median uncorrected reading acuity measured with the Salzburg Reading Desk for near distance at 40 cm was 0.18 logMAR (20/32 Snellen). The subjectively preferred near distance was 39 cm and revealed similar visual acuity results. The best reading acuity for intermediate distance with a median of 0.22 logMAR (20/32 Snellen) was achieved at a median distance of 62 cm. Reading performance of the multifocal IOL corresponded for near standardized and individual distance, whereas reading function was better at the patient's preferred intermediate distance. [J Refract Surg. 2016;32(8):526-532.]. Copyright 2016, SLACK Incorporated.

Impact of an 8-Month Trial Using Height-Adjustable Desks on Children’s Classroom Sitting Patterns and Markers of Cardio-Metabolic and Musculoskeletal Health

PubMed Central

Contardo Ayala, Ana María; Salmon, Jo; Timperio, Anna; Sudholz, Bronwyn; Ridgers, Nicola D.; Sethi, Parneet; Dunstan, David W.

2016-01-01

During school hours, children can sit for prolonged and unbroken periods of time. This study investigated the impact of an 8-month classroom-based intervention focusing on reducing and breaking-up sitting time on children’s cardio-metabolic risk factors (i.e., body mass index, waist circumference, blood pressure) and perceptions of musculoskeletal discomfort. Two Year-6 classes (24 students per class) in one primary school were assigned to either an intervention or control classroom. The intervention classroom was equipped with height-adjustable desks and the teacher was instructed in the delivery of pedagogical strategies to reduce and break-up sitting in class. The control classroom followed standard practice using traditional furniture. At baseline, and after 8-months, time spent sitting, standing, stepping, and sitting-bouts (occasions of continuous sitting) as well as the frequency of sit-to-stand transitions were obtained from activPAL inclinometers and the time spent in light-intensity physical activity was obtained from ActiGraph accelerometers. Demographics and musculoskeletal characteristics were obtained from a self-report survey. Hierarchical linear mixed models found that during class-time, children’s overall time spent sitting in long bouts (>10 min) were lower and the number of sit-to-stand transitions were higher in the intervention group compared to the control group, while no changes were observed for musculoskeletal pain/discomfort. No significant intervention effects were found for the anthropometrics measures and blood pressure. Height-adjustable desks and pedagogical strategies to reduce/break-up sitting can positively modify classroom sitting patterns in children. Longer interventions, larger and varied sample size may be needed to show health impacts; however, these desks did not increase musculoskeletal pain/discomfort. PMID:27973414

Indoor aldehydes concentration and emission rate of formaldehyde in libraries and private reading rooms

NASA Astrophysics Data System (ADS)

Kim, Jeonghoon; Kim, Seojin; Lee, Kiyoung; Yoon, Dongwon; Lee, Jiryang; Ju, DaeYoung

2013-06-01

Aldehydes are of particularly interest due to their potential adverse impact on human health. Formaldehyde is one of the most abundant indoor pollutants. To improve indoor air quality, identifying and removing the major emission sources of formaldehyde would be desirable. The purposes of this study were to determine aldehyde concentrations in libraries and reading rooms and to identify emission sources of formaldehyde in private reading rooms. Indoor aldehyde concentrations were quantified at 66 facilities, including public libraries, children's libraries, public reading rooms, and private reading rooms, in the Seoul metropolitan area. Emission fluxes of formaldehyde from the surfaces of desks, chairs, floors, walls, and ceilings in 19 private reading rooms were measured using a passive emission colorimetric sensor. Indoor aldehyde (formaldehyde, acetaldehyde, propioaldehyde, benzaldehyde, and hexaldehyde) levels were significantly higher than outdoor levels. Indoor formaldehyde geometric mean concentrations in private reading rooms (119.3 μg m-3) were significantly higher than in public libraries (29.2 μg m-3), children's libraries (29.3 μg m-3), and public reading rooms (40.8 μg m-3). Indoor formaldehyde levels were associated with relative humidity. In private reading rooms, the emission rates from desks (255.5 ± 214.8 μg h-1) and walls (231.7 ± 192.3 μg h-1) were significantly higher than that from chairs (79.6 ± 88.5 μg h-1). Desks (31%) and walls (29%) were the major emission sources of formaldehyde in 14 facilities in which measurements exceeded the indoor standard of 100 μg m-3. The age of interior materials was a significant factor for indoor formaldehyde emission flux. Controlling the emission rates of desks and walls is recommended to improve formaldehyde concentrations in private reading rooms.

Near Work Related Parameters and Myopia in Chinese Children: the Anyang Childhood Eye Study

PubMed Central

Li, Shi-Ming; Li, Si-Yuan; Kang, Meng-Tian; Zhou, Yuehua; Liu, Luo-Ru; Li, He; Wang, Yi-Peng; Zhan, Si-Yan; Gopinath, Bamini; Mitchell, Paul; Wang, Ningli

2015-01-01

Purpose To examine the associations of near work related parameters with spherical equivalent refraction and axial length in Chinese children. Methods A total of 1770 grade 7 students with mean age of 12.7 years were examined with cycloplegic autorefraction and axial length. Questions were asked regarding time spent in near work and outdoors per day, and near work related parameters. Results Multivariate models revealed the following associations with greater odds of myopia: continuous reading (> 45min), odds ratio [OR], 1.4; 95% confidence interval [CI], 1.1-1.8; close television viewing distance (≤ 3m), OR, 1.7; 95% CI, 1.2-2.3; head tilt when writing, OR, 1.3; 95% CI, 1.1-1.7, and desk lighting using fluorescent vs. incandescent lamp, OR, 1.5; 95% CI, 1.2-2.0. These factors, together with close reading distance and close nib-to-fingertip distance were significantly associated with greater myopia (P<0.01). Among near work activities, only reading more books for pleasure was significantly associated with greater myopia (P=0.03). Television viewing distance (≤ 3 m), fluorescent desk light, close reading distance (≤20 cm) and close nib-to-fingertip distance (≤ 2 cm) were significantly associated with longer axial length (P<0.01). Reading distance, desk light, and reading books for pleasure had significant interaction effects with parental myopia. Conclusions Continuous reading, close distances of reading, television viewing and nib-to-fingertip, head tilt when writing, reading more books for pleasure and use of fluorescent desk light were significantly associated with myopia in 12-year-old Chinese children, which indicates that visual behaviors and environments may be important factors mediating the effects of near work on myopia. PMID:26244865

Validating MEDIQUAL Constructs

NASA Astrophysics Data System (ADS)

Lee, Sang-Gun; Min, Jae H.

In this paper, we validate MEDIQUAL constructs through the different media users in help desk service. In previous research, only two end-users' constructs were used: assurance and responsiveness. In this paper, we extend MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggest that: 1) five MEDIQUAL constructs are validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of the constructs that are expected to differ; and 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.

Teachers with learning disabilities: a view from both sides of the desk.

PubMed

Ferri, B A; Keefe, C H; Gregg, N

2001-01-01

The purpose of this qualitative multicase study was to explore the perceptions of individuals who could speak from both sides of the special education desk--as students and as teachers. The three participants for this study each received special education services for learning disabilities while in school and were currently teaching students with learning disabilities. Specifically the study focused on how participants' past experiences with receiving special education services influenced their current practice as special education teachers. Participants' views on service delivery models, the importance of teacher expectations, and the value of conceiving a learning disability as a tool rather than a deficit are discussed.

Nurse's Desk: food bank-based outreach and screening to decrease unmet referral needs.

PubMed

Larsson, Laura S; Kuster, Emilie

2013-01-01

The Nurse's Desk health screening project used the Intervention Wheel model to conduct outreach, screening, education, and referral for food bank clients (n = 506). Blood glucose, blood pressure, health care utilization, and unmet referral needs were assessed. Screening results identified 318 clients (62.8%) with 1 or more unmet referral needs, including 6 clients (3.16%) with capillary blood glucose more than 199 mg/dL and 132 (31.9%) with hypertension. Clients had higher-than-average systolic and diastolic blood pressures and undiagnosed diabetes than in the general population. A client-approved method for tracking completed referrals is needed for this potentially high-risk population.

Comfort, Energy Efficiency and Adoption of Personal Cooling Systems in Warm Environments: A Field Experimental Study.

PubMed

He, Yingdong; Li, Nianping; Wang, Xiang; He, Meiling; He, De

2017-11-17

It is well known that personal cooling improves thermal comfort and save energy. This study aims to: (1) compare different personal cooling systems and (2) understand what influences users' willingness to adopt them. A series of experiments on several types of personal cooling systems, which included physical measurements, questionnaires and feedback, was conducted in a real office environment. The obtained results showed that personal cooling improved comfort of participants in warm environments. Then an improved index was proposed and used to compare different types of personal cooling systems in terms of comfort and energy efficiency simultaneously. According to the improved index, desk fans were highly energy-efficient, while the hybrid personal cooling (the combination of radiant cooling desk and desk fan) consumed more energy but showed advantages of extending the comfortable temperature range. Moreover, if personal cooling was free, most participants were willing to adopt it and the effectiveness was the main factor influencing their willingness, whereas if participants had to pay, they probably refused to adopt it due to the cost and the availability of conventional air conditioners. Thus, providing effective and free personal cooling systems should be regarded as a better way for its wider application.

Addressing culture and context in humanitarian response: preparing desk reviews to inform mental health and psychosocial support.

PubMed

Greene, M Claire; Jordans, Mark J D; Kohrt, Brandon A; Ventevogel, Peter; Kirmayer, Laurence J; Hassan, Ghayda; Chiumento, Anna; van Ommeren, Mark; Tol, Wietse A

2017-01-01

Delivery of effective mental health and psychosocial support programs requires knowledge of existing health systems and socio-cultural context. To respond rapidly to humanitarian emergencies, international organizations often seek to design programs according to international guidelines and mobilize external human resources to manage and deliver programs. Familiarizing international humanitarian practitioners with local culture and contextualizing programs is essential to minimize risk of harm, maximize benefit, and optimize efficient use of resources. Timely literature reviews on traditional health practices, cultural beliefs and attitudes toward mental health and illness, local health care systems and previous experiences with humanitarian interventions can provide international practitioners with crucial background information to improve their capacity to work efficiently and with maximum benefit. In this paper, we draw on experience implementing desk review guidance from the World Health Organization (WHO) and UNHCR, the United Nations Refugee Agency (2012) in four diverse humanitarian crises (earthquakes in Haiti and Nepal; forced displacement among Syrians and Congolese). We discuss critical parameters for the design and implementation of desk reviews, and discuss current challenges and future directions to improve mental health care and psychosocial support in humanitarian emergencies.

Does Saudi school furniture meet ergonomics requirements?

PubMed

Ramadan, Mohamed Zaki

2011-01-01

The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

Computer face-matching technology using two-dimensional photographs accurately matches the facial gestalt of unrelated individuals with the same syndromic form of intellectual disability.

PubMed

Dudding-Byth, Tracy; Baxter, Anne; Holliday, Elizabeth G; Hackett, Anna; O'Donnell, Sheridan; White, Susan M; Attia, John; Brunner, Han; de Vries, Bert; Koolen, David; Kleefstra, Tjitske; Ratwatte, Seshika; Riveros, Carlos; Brain, Steve; Lovell, Brian C

2017-12-19

Massively parallel genetic sequencing allows rapid testing of known intellectual disability (ID) genes. However, the discovery of novel syndromic ID genes requires molecular confirmation in at least a second or a cluster of individuals with an overlapping phenotype or similar facial gestalt. Using computer face-matching technology we report an automated approach to matching the faces of non-identical individuals with the same genetic syndrome within a database of 3681 images [1600 images of one of 10 genetic syndrome subgroups together with 2081 control images]. Using the leave-one-out method, two research questions were specified: 1) Using two-dimensional (2D) photographs of individuals with one of 10 genetic syndromes within a database of images, did the technology correctly identify more than expected by chance: i) a top match? ii) at least one match within the top five matches? or iii) at least one in the top 10 with an individual from the same syndrome subgroup? 2) Was there concordance between correct technology-based matches and whether two out of three clinical geneticists would have considered the diagnosis based on the image alone? The computer face-matching technology correctly identifies a top match, at least one correct match in the top five and at least one in the top 10 more than expected by chance (P < 0.00001). There was low agreement between the technology and clinicians, with higher accuracy of the technology when results were discordant (P < 0.01) for all syndromes except Kabuki syndrome. Although the accuracy of the computer face-matching technology was tested on images of individuals with known syndromic forms of intellectual disability, the results of this pilot study illustrate the potential utility of face-matching technology within deep phenotyping platforms to facilitate the interpretation of DNA sequencing data for individuals who remain undiagnosed despite testing the known developmental disorder genes.

Unified Geophysical Cloud Platform (UGCP) for Seismic Monitoring and other Geophysical Applications.

NASA Astrophysics Data System (ADS)

Synytsky, R.; Starovoit, Y. O.; Henadiy, S.; Lobzakov, V.; Kolesnikov, L.

2016-12-01

We present Unified Geophysical Cloud Platform (UGCP) or UniGeoCloud as an innovative approach for geophysical data processing in the Cloud environment with the ability to run any type of data processing software in isolated environment within the single Cloud platform. We've developed a simple and quick method of several open-source widely known software seismic packages (SeisComp3, Earthworm, Geotool, MSNoise) installation which does not require knowledge of system administration, configuration, OS compatibility issues etc. and other often annoying details preventing time wasting for system configuration work. Installation process is simplified as "mouse click" on selected software package from the Cloud market place. The main objective of the developed capability was the software tools conception with which users are able to design and install quickly their own highly reliable and highly available virtual IT-infrastructure for the organization of seismic (and in future other geophysical) data processing for either research or monitoring purposes. These tools provide access to any seismic station data available in open IP configuration from the different networks affiliated with different Institutions and Organizations. It allows also setting up your own network as you desire by selecting either regionally deployed stations or the worldwide global network based on stations selection form the global map. The processing software and products and research results could be easily monitored from everywhere using variety of user's devices form desk top computers to IT gadgets. Currents efforts of the development team are directed to achieve Scalability, Reliability and Sustainability (SRS) of proposed solutions allowing any user to run their applications with the confidence of no data loss and no failure of the monitoring or research software components. The system is suitable for quick rollout of NDC-in-Box software package developed for State Signatories and aimed for promotion of data processing collected by the IMS Network.

A user-friendly, menu-driven, language-free laser characteristics curves graphing program for desk-top IBM PC compatible computers

NASA Technical Reports Server (NTRS)

Klutz, Glenn

1989-01-01

A facility was established that uses collected data and feeds it into mathematical models that generate improved data arrays by correcting for various losses, base line drift, and conversion to unity scaling. These developed data arrays have headers and other identifying information affixed and are subsequently stored in a Laser Materials and Characteristics data base which is accessible to various users. The two part data base: absorption - emission spectra and tabulated data, is developed around twelve laser models. The tabulated section of the data base is divided into several parts: crystalline, optical, mechanical, and thermal properties; aborption and emission spectra information; chemical name and formulas; and miscellaneous. A menu-driven, language-free graphing program will reduce and/or remove the requirement that users become competent FORTRAN programmers and the concomitant requirement that they also spend several days to a few weeks becoming conversant with the GEOGRAF library and sequence of calls and the continual refreshers of both. The work included becoming thoroughly conversant with or at least very familiar with GEOGRAF by GEOCOMP Corp. The development of the graphing program involved trial runs of the various callable library routines on dummy data in order to become familiar with actual implementation and sequencing. This was followed by trial runs with actual data base files and some additional data from current research that was not in the data base but currently needed graphs. After successful runs, with dummy and real data, using actual FORTRAN instructions steps were undertaken to develop the menu-driven language-free implementation of a program which would require the user only know how to use microcomputers. The user would simply be responding to items displayed on the video screen. To assist the user in arriving at the optimum values needed for a specific graph, a paper, and pencil check list was made available to use on the trial runs.

Efficient Proximity Computation Techniques Using ZIP Code Data for Smart Cities †

PubMed Central

Murdani, Muhammad Harist; Hong, Bonghee

2018-01-01

In this paper, we are interested in computing ZIP code proximity from two perspectives, proximity between two ZIP codes (Ad-Hoc) and neighborhood proximity (Top-K). Such a computation can be used for ZIP code-based target marketing as one of the smart city applications. A naïve approach to this computation is the usage of the distance between ZIP codes. We redefine a distance metric combining the centroid distance with the intersecting road network between ZIP codes by using a weighted sum method. Furthermore, we prove that the results of our combined approach conform to the characteristics of distance measurement. We have proposed a general and heuristic approach for computing Ad-Hoc proximity, while for computing Top-K proximity, we have proposed a general approach only. Our experimental results indicate that our approaches are verifiable and effective in reducing the execution time and search space. PMID:29587366

Computational chemistry for NH 3 synthesis, hydrotreating, and NO x reduction: Three topics of special interest to Haldor Topsøe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elnabawy, Ahmed O.; Rangarajan, Srinivas; Mavrikakis, Manos

Computational chemistry, especially density functional theory, has experienced a remarkable growth in terms of application over the last few decades. This is attributed to the improvements in theory and computing infrastructure that enable the analysis of systems of unprecedented size and detail at an affordable computational expense. In this perspective, we discuss recent progress and current challenges facing electronic structure theory in the context of heterogeneous catalysis. We specifically focus on the impact of computational chemistry in elucidating and designing catalytic systems in three topics of interest to Haldor Topsøe – ammonia, synthesis, hydrotreating, and NO x reduction. Furthermore, wemore » then discuss the common tools and concepts in computational catalysis that underline these topics and provide a perspective on the challenges and future directions of research in this area of catalysis research.« less

Computational chemistry for NH 3 synthesis, hydrotreating, and NO x reduction: Three topics of special interest to Haldor Topsøe

DOE PAGES

Elnabawy, Ahmed O.; Rangarajan, Srinivas; Mavrikakis, Manos

2015-06-05

Computational chemistry, especially density functional theory, has experienced a remarkable growth in terms of application over the last few decades. This is attributed to the improvements in theory and computing infrastructure that enable the analysis of systems of unprecedented size and detail at an affordable computational expense. In this perspective, we discuss recent progress and current challenges facing electronic structure theory in the context of heterogeneous catalysis. We specifically focus on the impact of computational chemistry in elucidating and designing catalytic systems in three topics of interest to Haldor Topsøe – ammonia, synthesis, hydrotreating, and NO x reduction. Furthermore, wemore » then discuss the common tools and concepts in computational catalysis that underline these topics and provide a perspective on the challenges and future directions of research in this area of catalysis research.« less

Efficient Proximity Computation Techniques Using ZIP Code Data for Smart Cities †.

PubMed

Murdani, Muhammad Harist; Kwon, Joonho; Choi, Yoon-Ho; Hong, Bonghee

2018-03-24

In this paper, we are interested in computing ZIP code proximity from two perspectives, proximity between two ZIP codes ( Ad-Hoc ) and neighborhood proximity ( Top-K ). Such a computation can be used for ZIP code-based target marketing as one of the smart city applications. A naïve approach to this computation is the usage of the distance between ZIP codes. We redefine a distance metric combining the centroid distance with the intersecting road network between ZIP codes by using a weighted sum method. Furthermore, we prove that the results of our combined approach conform to the characteristics of distance measurement. We have proposed a general and heuristic approach for computing Ad-Hoc proximity, while for computing Top-K proximity, we have proposed a general approach only. Our experimental results indicate that our approaches are verifiable and effective in reducing the execution time and search space.

Upper quadrant postural changes of school children in response to interaction with different information technologies.

PubMed

Briggs, Andrew; Straker, Leon; Greig, Alison

2004-06-10

The objective of this study was to quantitatively analyse the sitting posture of school children interacting with both old (book) and new (laptop and desktop computers) information technologies to test the hypothesis that posture is effected by the type of information technology (IT) used. A mixed model design was used to test the effect of IT type (within subjects) and age and gender (between subjects). The sitting posture of 32 children aged 4-17 years was measured whilst they read from a book, laptop, and desktop computer at a standard school chair and desk. Video images were captured and then digitized to calculate mean angles for head tilt, neck flexion, trunk flexion, and gaze angle. Posture was found to be influenced by IT type (p < 0.001), age (p < 0.001) and gender (p = 0.024) and significantly correlated to the stature of the participants. Measurement of resting posture and the maximal range of motion of the upper and lower cervical spines in the sagittal plane was also undertaken. The biophysical impact and the suitability of the three different information technologies are discussed.

Multi-class ERP-based BCI data analysis using a discriminant space self-organizing map.

PubMed

Onishi, Akinari; Natsume, Kiyohisa

2014-01-01

Emotional or non-emotional image stimulus is recently applied to event-related potential (ERP) based brain computer interfaces (BCI). Though the classification performance is over 80% in a single trial, a discrimination between those ERPs has not been considered. In this research we tried to clarify the discriminability of four-class ERP-based BCI target data elicited by desk, seal, spider images and letter intensifications. A conventional self organizing map (SOM) and newly proposed discriminant space SOM (ds-SOM) were applied, then the discriminabilites were visualized. We also classify all pairs of those ERPs by stepwise linear discriminant analysis (SWLDA) and verify the visualization of discriminabilities. As a result, the ds-SOM showed understandable visualization of the data with a shorter computational time than the traditional SOM. We also confirmed the clear boundary between the letter cluster and the other clusters. The result was coherent with the classification performances by SWLDA. The method might be helpful not only for developing a new BCI paradigm, but also for the big data analysis.

Computer Science Career Network

DTIC Science & Technology

2013-03-01

development model. TopCoder’s development model is competition-based, meaning that TopCoder conducts competitions to develop digital assets. TopCoder...success in running a competition that had as an objective creating digital assets, and we intend to run more of them, to create assets for...cash prizes and merchandise . This includes social media contests, contests will all our games, special referral contests, and a couple NASA

Three-Dimensional Displays In The Future Flight Station

NASA Astrophysics Data System (ADS)

Bridges, Alan L.

1984-10-01

This review paper summarizes the development and applications of computer techniques for the representation of three-dimensional data in the future flight station. It covers the development of the Lockheed-NASA Advanced Concepts Flight Station (ACFS) research simulators. These simulators contain: A Pilot's Desk Flight Station (PDFS) with five 13- inch diagonal, color, cathode ray tubes on the main instrument panel; a computer-generated day and night visual system; a six-degree-of-freedom motion base; and a computer complex. This paper reviews current research, development, and evaluation of easily modifiable display systems and software requirements for three-dimensional displays that may be developed for the PDFS. This includes the analysis and development of a 3-D representation of the entire flight profile. This 3-D flight path, or "Highway-in-the-Sky", will utilize motion and perspective cues to tightly couple the human responses of the pilot to the aircraft control systems. The use of custom logic, e.g., graphics engines, may provide the processing power and architecture required for 3-D computer-generated imagery (CGI) or visual scene simulation (VSS). Diffraction or holographic head-up displays (HUDs) will also be integrated into the ACFS simulator to permit research on the requirements and use of these "out-the-window" projection systems. Future research may include the retrieval of high-resolution, perspective view terrain maps which could then be overlaid with current weather information or other selectable cultural features.

Transportation energy data book

NASA Astrophysics Data System (ADS)

Davis, S. C.; Hu, P. S.

1991-01-01

The Transportation Energy Data Book: Edition 11 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Transportation Technologies in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. Each of the major transportation modes - highway, air, water, rail, pipeline - is treated in separate chapters or sections. Chapter 1 compares U.S. transportation data with data from seven other countries. Aggregate energy use and energy supply data for all modes are presented in Chapter 2. The highway mode, which accounts for over three-fourths of total transportation energy consumption, is dealt with in Chapter 3. Topics in this chapter include automobiles, trucks, buses, fleet automobiles, Federal standards, fuel economies, and household data. Chapter 4 is a new addition to the data book series, containing information on alternative fuels and alternatively-fueled vehicles. The last chapter, Chapter 5, covers each of the nonhighway modes: air, water, pipeline, and rail, respectively.

A compact "water-window" microscope with 60-nm spatial resolution based on a double stream gas-puff target and Fresnel zone plate optics

NASA Astrophysics Data System (ADS)

Wachulak, Przemyslaw; Torrisi, Alfio; Nawaz, Muhammad F.; Adjei, Daniel; Bartnik, Andrzej; Kostecki, Jerzy; Wegrzynski, Łukasz; Vondrová, Šárka; Turňová, Jana; Fok, Tomasz; Jančarek, Alexandr; Fiedorowicz, Henryk

2015-05-01

Radiation with shorter illumination wavelength allows for extension of the diffraction limit towards nanometer scale, which is a straightforward way to significantly improve a spatial resolution in photon based microscopes. Soft X-ray (SXR) radiation, from the so called "water window" spectral range, λ=2.3-4.4 nm, which is particularly suitable for biological imaging due to natural optical contrast, providing much better spatial resolution than one obtained with visible light microscopes. The high contrast is obtained because of selective absorption of radiation by carbon and water, being constituents of the biological samples. We present a desk-top system, capable of resolving 60 nm features in few seconds exposure time. We exploit the advantages of a compact, laser-plasma SXR source, based on a double stream nitrogen gas puff target, developed at the Institute of Optoelectronics, Military University of Technology. The source, emitting quasi-monochromatic, incoherent radiation, in the "water widow" spectral range at λ = 2.88 nm, is coupled with ellipsoidal, grazing incidence condenser and Fresnel zone plate objective. The construction of the microscope with some recent images of test and real samples will be presented and discussed.

Computer Training for the Real World.

ERIC Educational Resources Information Center

American School and University, 1981

1981-01-01

Hull High School in suburban Boston (Massachusetts) is rated as one of the top 10 secondary schools in the country offering a computer education program. The same computers used by the students are shared by school officials for administrative tasks. (Author/MLF)

From technical jargon to plain English for application.

PubMed Central

Lindsley, O R

1991-01-01

These examples of translating technical jargon into plain English application words, acronyms, letter codes, and simple tests were necessary as we developed Precision Teaching. I hope our experience is useful to others facing the problems of applying technology in practical settings. At the least, our experience should give you an idea of the work and time involved in making your own translations. Above all, be patient. Accurate plain English translations do not come easily. They cannot be made at your desk. A search often takes years to produce one new accurate plain English translation. Rapid publication pressures, journal editorial policies, and investments in materials, books, and computer programs all combine to hamper these translations. It's possible that you will find some of our plain English equivalents useful in your own applied behavior analysis applications. PMID:1752836

A computerized resolution of scheduling conflicts.

PubMed

Bolinger, R E; McFarlane, M J

1989-01-01

Residency training programs in Internal Medicine require resident attendance in a continuity clinic. This inevitably engenders conflicts between scheduling in the ambulatory clinic and the required teaching activities of the in-patient services. Some of the conflicts can be resolved by allowing the in-patient service directors to indicate preferred plans for their residents to attend in the continuity clinic. With this plan, scheduling becomes quite complicated. A computer program is presented with coordinates these service requests with ambulatory clinic scheduling. As a result, a given resident may have his/her clinic day changed on different rotations. The program automatically arbitrates conflicts and publishes the attendance dates for the entire academic year. This information is supplied to the appointment desk so that patients can be scheduled accordingly. This system has resulted in a 74% continuity rate and improved satisfaction by both residents and staff.

Audience-contingent variation in action demonstrations for humans and computers.

PubMed

Herberg, Jonathan S; Saylor, Megan M; Ratanaswasd, Palis; Levin, Daniel T; Wilkes, D Mitchell

2008-09-01

People may exhibit two kinds of modifications when demonstrating action for others: modifications to facilitate bottom-up, or sensory-based processing; and modifications to facilitate top-down, or knowledge-based processing. The current study examined actors' production of such modifications in action demonstrations for audiences that differed in their capacity for intentional reasoning. Actors' demonstrations of complex actions for a non-anthropomorphic computer system and for people (adult and toddler) were compared. Evidence was found for greater highlighting of top-down modifications in the demonstrations for the human audiences versus the computer audience. Conversely, participants highlighted simple perceptual modifications for the computer audience, producing more punctuated and wider ranging motions. This study suggests that people consider differences in their audiences when demonstrating action. 2008 Cognitive Science Society, Inc.

An Integral Study of Galactic Black Hole States

NASA Technical Reports Server (NTRS)

2005-01-01

XTE 51550-564 was clearly detected with INTEGRAL out to 600 keV with the SPI, and is one of only two sources detected with IBISPICSIT. Software difficulties in analyzing the data prevented us from progressing with the analysis past the most elementary stages (see last year's report). The support from the INTEGRAL help desk has been very disappointing. People affiliated with INTEGRAL published a paper on the results of our data before we could master the reduction and analysis software. We are not the only group that got stuck with the analysis without adequate support from the INTEGRAL help desk. This was a rather disappointing experience as we lost many months of valuable time and efforts.

Moisture-Induced TBC Spallation on Turbine Blade Samples

NASA Technical Reports Server (NTRS)

Smialek, James

2011-01-01

Delayed failure of TBCs is a widely observed laboratory phenomenon, although many of the early observations went unreported. The weekend effect or DeskTop Spallation (DTS) is characterized by initial survival of a TBC after accelerated laboratory thermal cycling, then failure by exposure to ambient humidity or water. Once initiated, failure can occur quite dramatically in less than a second. To this end, the water drop test and digital video recordings have become useful techniques in studies at NASA (Smialek, Zhu, Cuy), DECHMA (Rudolphi, Renusch, Schuetze), and CNRS Toulouse/SNECMA (Deneux, Cadoret, Hervier, Monceau). In the present study the results for a commercial turbine blade, with a standard EB-PVD 7YSZ TBC top coat and Pt-aluminide diffusion bond coat are reported. Cut sections were intermittently oxidized at 1100, 1150, and 1200 C and monitored by weight change and visual appearance. Failures were distributed widely over a 5-100 hr time range, depending on temperature. At some opportune times, failure was captured by video recording, documenting the appearance and speed of the moisture-induced spallation process. Failure interfaces exhibited alumina scale grains, decorated with Ta-rich oxide particles, and alumina inclusions as islands and streamers. The phenomenon is thus rooted in moisture-induced delayed spallation (MIDS) of the alumina scale formed on the bond coat. In that regard, many studies show the susceptibility of alumina scales to moisture, as long as high strain energy and a partially exposed interface exist. The latter conditions result from severe cyclic oxidation conditions, which produce a highly stressed and partially damaged scale. In one model, it has been proposed that moisture reacts with aluminum in the bond coat to release hydrogen atoms that embrittle the interface. A negative synergistic effect with interfacial sulfur is also invoked.

Moisture-Induced TBC Spallation on Turbine Blade Samples

NASA Technical Reports Server (NTRS)

Smialek, James L.

2011-01-01

Delayed failure of TBCs is a widely observed laboratory phenomenon, although many of the early observations went unreported. "The weekend effect" or "DeskTop Spallation" (DTS) is characterized by initial survival of a TBC after accelerated laboratory thermal cycling, then failure by exposure to ambient humidity or water. Once initiated, failure can occur quite dramatically in less than a second. To this end, the water drop test and digital video recordings have become useful techniques in studies at NASA (Smialek, Zhu, Cuy), DECHMA (Rudolphi, Renusch, Schuetze), and CNRS Toulouse/SNECMA (Deneux, Cadoret, Hervier, Monceau). In the present study the results for a commercial turbine blade, with a standard EB-PVD 7YSZ TBC top coat and Pt-aluminide diffusion bond monitored by weight change and visual appearance. Failures were distributed widely over a 5-100 hr time range, depending on temperature. At some opportune times, failure was captured by video recording, documenting the appearance and speed of the moisture-induced spallation process. Failure interfaces exhibited alumina scale grains, decorated with Ta-rich oxide particles, and alumina inclusions as islands and streamers. The phenomenon is thus rooted in moisture-induced delayed spallation (MIDS) of the alumina scale formed on the bond coat. In that regard, many studies show the susceptibility of alumina scales to moisture, as long as high strain energy and a partially exposed interface exist. The latter conditions result from severe cyclic oxidation conditions, which produce a highly stressed and partially damaged scale. In one model, it has been proposed that moisture reacts with aluminum in the bond coat to release hydrogen atoms that 'embrittle' the interface. A negative synergistic effect with interfacial sulfur is also invoked.

Virtualization and cloud computing in dentistry.

PubMed

Chow, Frank; Muftu, Ali; Shorter, Richard

2014-01-01

The use of virtualization and cloud computing has changed the way we use computers. Virtualization is a method of placing software called a hypervisor on the hardware of a computer or a host operating system. It allows a guest operating system to run on top of the physical computer with a virtual machine (i.e., virtual computer). Virtualization allows multiple virtual computers to run on top of one physical computer and to share its hardware resources, such as printers, scanners, and modems. This increases the efficient use of the computer by decreasing costs (e.g., hardware, electricity administration, and management) since only one physical computer is needed and running. This virtualization platform is the basis for cloud computing. It has expanded into areas of server and storage virtualization. One of the commonly used dental storage systems is cloud storage. Patient information is encrypted as required by the Health Insurance Portability and Accountability Act (HIPAA) and stored on off-site private cloud services for a monthly service fee. As computer costs continue to increase, so too will the need for more storage and processing power. Virtual and cloud computing will be a method for dentists to minimize costs and maximize computer efficiency in the near future. This article will provide some useful information on current uses of cloud computing.

The Top 10 Careers for the 1990s.

ERIC Educational Resources Information Center

Price, Paul

1988-01-01

Reports on a survey of experts from industry and academia which attempted to identify the top ten major career fields for engineers, including materials, biotechnology, automation and robotics, computer engineering, metals and mining, neural modeling, along with marine, aerospace, environmental and energy-related engineering. (TW)

The Top Companies You Want to Work for Most and Why.

ERIC Educational Resources Information Center

Freedland, Marjorie

1988-01-01

Summarizes the results of the 1987 National Engineering Student Employer Preference Survey and compares them with those reported by three previous biennial surveys. Lists the top 25 employer choices in electrical, mechanical, computer science, industrial, chemical, civil and astro/aeronautical engineering. (TW)

Studying Turbulence Using Numerical Simulation Databases. No. 7; Proceedings of the Summer Program

NASA Technical Reports Server (NTRS)

1998-01-01

The Seventh Summer Program of the Center for Turbulence Research took place in the four-week period, July 5 to July 31, 1998. This was the largest CTR Summer Program to date, involving thirty-six participants from the U. S. and nine other countries. Thirty-one Stanford and NASA-Ames staff members facilitated and contributed to most of the Summer projects. A new feature, and perhaps a preview of the future programs, was that many of the projects were executed on non-NASA computers. These included supercomputers located in Europe as well as those operated by the Departments of Defense and Energy in the United States. In addition, several simulation programs developed by the visiting participants at their home institutions were used. Another new feature was the prevalence of lap-top personal computers which were used by several participants to carry out some of the work that in the past were performed on desk-top workstations. We expect these trends to continue as computing power is enhanced and as more researchers (many of whom CTR alumni) use numerical simulations to study turbulent flows. CTR's main role continues to be in providing a forum for the study of turbulence for engineering analysis and in facilitating intellectual exchange among the leading researchers in the field. Once again the combustion group was the largest. Turbulent combustion has enjoyed remarkable progress in using simulations to address increasingly complex and practically more relevant questions. The combustion group's studies included such challenging topics as fuel evaporation, soot chemistry, and thermonuclear reactions. The latter study was one of three projects related to the Department of Energy's ASCI Program (www.llnl.gov/asci); the other two (rocket propulsion and fire safety) were carried out in the turbulence modeling group. The flow control and acoustics group demonstrated a successful application of the so-called evolution algorithms which actually led to a previously unknown forcing strategy for jets yielding increased spreading rate. A very efficient algorithm for flow in complex geometries with moving boundaries based on the immersed boundary forcing technique was tested with very encouraging results. Also a new strategy for the destruction of aircraft trailing vortices was introduced and tested. The Reynolds Averaged Modeling (RANS) group demonstrated that the elliptic relaxation concept for RANS calculations is also applicable to transonic flows with shocks; however, prediction of laminar/turbulent transition remains an important pacing item. A large fraction of the LES effort was devoted to the development and testing of a new algorithmic procedure (as opposed to phenomenological model) for subgrid scale modeling based on regularized de-filtering of the flow variables. This appears to be a very promising approach, and a significant effort is currently underway to assess its robustness in high Reynolds number flows and in conjunction with numerical methods for complex flows. As part of the Summer Program two review tutorials were given on Turbulent structures in hydrocarbon pool fires (Sheldon Tieszen), and Turbulent combustion modeling: from RANS to LES via DNS (Luc Vervisch); and two seminars entitled Assessment of turbulence models for engineering applications (Paul Durbin) and Subgrid-scale modeling for non-premixed, turbulent reacting flows (James Riley) were presented. A number of colleagues from universities, government agencies, and industry attended the final presentations of the participants on July 31 and participated in the discussions. There are twenty-six papers in this volume grouped in five areas. Each group is preceded with an overview by its coordinator.

Dual Use of Packaging on the Moon: Logistics-2-Living

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Howard, Robert

2010-01-01

This paper describes a modular packaging system for logistics that can be reconfigured into internal outfitting for a lunar outpost, including desks, chairs, partitions, cabinets, and radiation shielding. Logistics include clothes, equipment, food, and other consumables needed to sustain the crew for the duration of the mission. A significant mass penalty is required for the packaging and handling of logistics for re-supply of short to long-term space missions that must be brought out of the gravity well on a launch vehicle. Once the supplies have been exhausted, the packaging material is typically of no further use and is discarded. If a scheme can be developed that reuses the logistics packaging, the mass penalty can be reduced. In this research, a modular packaging system has been devised as a kit-of-parts that can be used for both handling logistics supplies, and then reconfigured into desks, chairs, partitions, cabinets, and radiation shielding. The system is derived from a standard International Space Station (ISS)-type Cargo Transfer Bag (CTB), using soft, unfoldable box-like containers with stiff metal inserts. The empty hydrogen-impregnated CTBs can be used as-is for cabinets, opened up for use as partitions, or draped over the habitat as layers of radiation shielding. Stiff metal inserts can be reconfigured into desks and other useful outfitting.

Comfort, Energy Efficiency and Adoption of Personal Cooling Systems in Warm Environments: A Field Experimental Study

PubMed Central

He, Yingdong; Li, Nianping; Wang, Xiang; He, Meiling; He, De

2017-01-01

It is well known that personal cooling improves thermal comfort and save energy. This study aims to: (1) compare different personal cooling systems and (2) understand what influences users’ willingness to adopt them. A series of experiments on several types of personal cooling systems, which included physical measurements, questionnaires and feedback, was conducted in a real office environment. The obtained results showed that personal cooling improved comfort of participants in warm environments. Then an improved index was proposed and used to compare different types of personal cooling systems in terms of comfort and energy efficiency simultaneously. According to the improved index, desk fans were highly energy-efficient, while the hybrid personal cooling (the combination of radiant cooling desk and desk fan) consumed more energy but showed advantages of extending the comfortable temperature range. Moreover, if personal cooling was free, most participants were willing to adopt it and the effectiveness was the main factor influencing their willingness, whereas if participants had to pay, they probably refused to adopt it due to the cost and the availability of conventional air conditioners. Thus, providing effective and free personal cooling systems should be regarded as a better way for its wider application. PMID:29149078

Critical thinking traits of top-tier experts and implications for computer science education

NASA Astrophysics Data System (ADS)

Bushey, Dean E.

A documented shortage of technical leadership and top-tier performers in computer science jeopardizes the technological edge, security, and economic well-being of the nation. The 2005 President's Information and Technology Advisory Committee (PITAC) Report on competitiveness in computational sciences highlights the major impact of science, technology, and innovation in keeping America competitive in the global marketplace. It stresses the fact that the supply of science, technology, and engineering experts is at the core of America's technological edge, national competitiveness and security. However, recent data shows that both undergraduate and postgraduate production of computer scientists is falling. The decline is "a quiet crisis building in the United States," a crisis that, if allowed to continue unchecked, could endanger America's well-being and preeminence among the world's nations. Past research on expert performance has shown that the cognitive traits of critical thinking, creativity, and problem solving possessed by top-tier performers can be identified, observed and measured. The studies show that the identified attributes are applicable across many domains and disciplines. Companies have begun to realize that cognitive skills are important for high-level performance and are reevaluating the traditional academic standards they have used to predict success for their top-tier performers in computer science. Previous research in the computer science field has focused either on programming skills of its experts or has attempted to predict the academic success of students at the undergraduate level. This study, on the other hand, examines the critical-thinking skills found among experts in the computer science field in order to explore the questions, "What cognitive skills do outstanding performers possess that make them successful?" and "How do currently used measures of academic performance correlate to critical-thinking skills among students?" The results of this study suggest a need to examine how critical-thinking abilities are learned in the undergraduate computer science curriculum and the need to foster these abilities in order to produce the high-level, critical-thinking professionals necessary to fill the growing need for these experts. Due to the fact that current measures of academic performance do not adequately depict students' cognitive abilities, assessment of these skills must be incorporated into existing curricula.

75 FR 30007 - Race to the Top Fund Assessment Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... DEPARTMENT OF EDUCATION Overview Information Race to the Top Fund Assessment Program Catalog of... Assessment Program. This notice makes two corrections to the April 9 NIA. FOR FURTHER INFORMATION CONTACT..., audiotape, or computer diskette) on request to the contact listed in this section. SUPPLEMENTARY INFORMATION...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalvit, Diego; Messina, Riccardo; Maia Neto, Paulo

We develop the scattering approach for the dispersive force on a ground state atom on top of a corrugated surface. We present explicit results to first order in the corrugation amplitude. A variety of analytical results are derived in different limiting cases, including the van der Waals and Casimir-Polder regimes. We compute numerically the exact first-order dispersive potential for arbitrary separation distances and corrugation wavelengths, for a Rubidium atom on top of a silicon or gold corrugated surface. We consider in detail the correction to the proximity force approximation, and present a very simple approximation algorithm for computing the potential.

Michael Levitt and Computational Biology

Science.gov Websites

molecular structures, compute structural changes, refine experimental structure, model enzyme catalysis and (May 2004) Top Some links on this page may take you to non-federal websites. Their policies may differ

Administrative Uses of Computers in the Schools.

ERIC Educational Resources Information Center

Bluhm, Harry P.

This book, intended for school administrators, provides a comprehensive account of how computer information systems can enable administrators at both middle and top management levels to manage the educational enterprise. It can be used as a textbook in an educational administration course emphasizing computer technology in education, an…

WebTOP: A 3D Interactive System for Teaching and Learning Optics

ERIC Educational Resources Information Center

Mzoughi, Taha; Herring, S. Davis; Foley, John T.; Morris, Matthew J.; Gilbert, Peter J.

2007-01-01

WebTOP is a three-dimensional, Web-based, interactive computer graphics system that helps instructors teach and students learn about waves and optics. Current subject areas include waves, geometrical optics, reflection and refraction, polarization, interference, diffraction, lasers, and scattering. Some of the topics covered are suited for…

Materials Science | NREL

Science.gov Websites

sulfide (SnS). The top image represents output from atomic force microscopy for the molecular sections and computations. The image shows modeled electronic density of states (top panel) of the the bandgap of the narrow-gap crystalline semiconductors (left and right sides of the image) when it

Top 10 Threats to Computer Systems Include Professors and Students

ERIC Educational Resources Information Center

Young, Jeffrey R.

2008-01-01

User awareness is growing in importance when it comes to computer security. Not long ago, keeping college networks safe from cyberattackers mainly involved making sure computers around campus had the latest software patches. New computer worms or viruses would pop up, taking advantage of some digital hole in the Windows operating system or in…

Carbon Monoxide Safety

MedlinePlus

... portable generators? Source: National Institute of Standards and Technology More information on carbon monoxide safety Heating fire safety NFPA Educational Messages Desk Reference – these messages provide fire and ...

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Series Other Information Collaborators In-House Website Transition to Operations Presentations

Computer-Based and Paper-Based Measurement of Recognition Performance.

ERIC Educational Resources Information Center

Federico, Pat-Anthony

To determine the relative reliabilities and validities of paper-based and computer-based measurement procedures, 83 male student pilots and radar intercept officers were administered computer and paper-based tests of aircraft recognition. The subject matter consisted of line drawings of front, side, and top silhouettes of aircraft. Reliabilities…

The PDA as a reference tool: libraries' role in enhancing nursing education.

PubMed

Scollin, Patrick; Callahan, John; Mehta, Apurva; Garcia, Elizabeth

2006-01-01

"The PDA as a Reference Tool: The Libraries' Role in Enhancing Nursing Education" is a pilot project funded by the University of Massachusetts President's Office Information Technology Council through their Professional Development Grant program in 2004. The project's goal is to offer faculty and students in nursing programs at two University of Massachusetts campuses access to an array of medical reference information, such as handbooks, dictionaries, calculators, and diagnostic tools, on small handheld computers called personal digital assistants. Through exposure to the variety of information resources in this digital format, participants can discover and explore these resources at no personal financial cost. Participants borrow handhelds from the University Library's circulation desks. The libraries provide support in routine resynchronizing of handhelds to update information. This report will discuss how the projects were administered, what we learned about what did and did not work, the problems and solutions, and where we hope to go from here.

Virtual Reality Used to Serve the Glenn Engineering Community

NASA Technical Reports Server (NTRS)

Carney, Dorothy V.

2001-01-01

There are a variety of innovative new visualization tools available to scientists and engineers for the display and analysis of their models. At the NASA Glenn Research Center, we have an ImmersaDesk, a large, single-panel, semi-immersive display device. This versatile unit can interactively display three-dimensional images in visual stereo. Our challenge is to make this virtual reality platform accessible and useful to researchers. An example of a successful application of this computer technology is the display of blade out simulations. NASA Glenn structural dynamicists, Dr. Kelly Carney and Dr. Charles Lawrence, funded by the Ultra Safe Propulsion Project under Base R&T, are researching blade outs, when turbine engines lose a fan blade during operation. Key objectives of this research include minimizing danger to the aircraft via effective blade containment, predicting destructive loads due to the imbalance following a blade loss, and identifying safe, cost-effective designs and materials for future engines.

Computer Code for Interpreting 13C NMR Relaxation Measurements with Specific Models of Molecular Motion: The Rigid Isotropic and Symmetric Top Rotor Models and the Flexible Symmetric Top Rotor Model

DTIC Science & Technology

2017-01-01

unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT: Carbon-13 nuclear magnetic resonance (13C NMR) spectroscopy is a powerful technique for...FLEXIBLE SYMMETRIC TOP ROTOR MODEL 1. INTRODUCTION Nuclear magnetic resonance (NMR) spectroscopy is a tremendously powerful technique for...application of NMR spectroscopy concerns the property of molecular motion, which is related to many physical, and even biological, functions of molecules in

Progress Towards Understanding Fan Inlet Implications of Top-Mounted Propulsion

NASA Technical Reports Server (NTRS)

Friedlander, David

2017-01-01

Computational fluid dynamic (CFD) simulations were performed on an N+2 commercial supersonic transport aircraft design that featured top-mounted propulsion. The simulations were run at take-off conditions at both 0 degrees and 8 degrees angle of attack. The results showed little separation in around the inlets with inlet performance on par with an under-the-wing configuration. The next step will be to take these results and determine the acoustic impact of the top-mounted propulsion system.

Distributed downhole drilling network

DOEpatents

Hall, David R.; Hall, Jr., H. Tracy; Fox, Joe; Pixton, David S.

2006-11-21

A high-speed downhole network providing real-time data from downhole components of a drilling strings includes a bottom-hole node interfacing to a bottom-hole assembly located proximate the bottom end of a drill string. A top-hole node is connected proximate the top end of the drill string. One or several intermediate nodes are located along the drill string between the bottom-hole node and the top-hole node. The intermediate nodes are configured to receive and transmit data packets transmitted between the bottom-hole node and the top-hole node. A communications link, integrated into the drill string, is used to operably connect the bottom-hole node, the intermediate nodes, and the top-hole node. In selected embodiments, a personal or other computer may be connected to the top-hole node, to analyze data received from the intermediate and bottom-hole nodes.

Computations and interpretations: The growth of quantum chemistry, 1927-1967

NASA Astrophysics Data System (ADS)

Park, Buhm Soon

1999-10-01

This dissertation is a contribution to the historical study of scientific disciplines in the twentieth century. It seeks to examine the development of quantum chemistry during the four decades after its inception in 1927. This development was manifest in theories, tools, scientists, and institutions, all of which constituted the disciplinary identity of quantum chemistry. To characterize its identity, I deal with the origins of key ideas and concepts; the change of computational tools from desk calculators to digital computers; the formation of a network among research groups and individuals; and the institutionalization of annual meetings. The dissertation's thesis is three-fold. First, in the pre- World War II years, there were individual contributions to the development of theories in quantum chemistry, but the founding fathers worked in their disciplinary contexts of physics or chemistry with little interest in building a quantum chemistry community. Second, the introduction of electronic digital computers in the postwar years affected the resurgence of the ab initio approach-the attempt to solve the Schrödinger equation without recourse to empirical data-and also the emergence of a community of quantum chemists. But the use of computers did not give rise to a consensus over the aims, methods, or content of the discipline. Third, quantum chemistry exerted a significant influence upon the transformation of chemical education and research in general, thanks to ``chemical translators,'' who sought to explain the gist of quantum chemistry in a language that chemists could understand. In sum, quantum chemistry has been a discipline characterized by diverse traditions, and the whole of chemistry has been under the influence of computations and interpretations made by quantum chemists.

Formal specification of human-computer interfaces

NASA Technical Reports Server (NTRS)

Auernheimer, Brent

1990-01-01

A high-level formal specification of a human computer interface is described. Previous work is reviewed and the ASLAN specification language is described. Top-level specifications written in ASLAN for a library and a multiwindow interface are discussed.

Top 10 "Smart" Technologies for Schools.

ERIC Educational Resources Information Center

Fodeman, Doug; Holzberg, Carol S.; Kennedy, Kristen; McIntire, Todd; McLester, Susan; Ohler, Jason; Parham, Charles; Poftak, Amy; Schrock, Kathy; Warlick, David

2002-01-01

Describes 10 smart technologies for education, including voice to text software; mobile computing; hybrid computing; virtual reality; artificial intelligence; telementoring; assessment methods; digital video production; fingerprint recognition; and brain functions. Lists pertinent Web sites for each technology. (LRW)

Computing, Environment and Life Sciences | Argonne National Laboratory

Science.gov Websites

engineer receives prestigious medal August 18, 2016 Software optimized on Mira advances design of mini » Back to top Twitter Flickr Facebook Linked In YouTube Pinterest Google Plus Computing, Environment and

AskIT Service Desk Support Value Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashcraft, Phillip Lynn; Cummings, Susan M.; Fogle, Blythe G.

The value model discussed herein provides an accurate and simple calculation of the funding required to adequately staff the AskIT Service Desk (SD).  The model is incremental – only technical labor cost is considered.  All other costs, such as management, equipment, buildings, HVAC, and training are considered common elements of providing any labor related IT Service. Depending on the amount of productivity loss and the number of hours the defect was unresolved, the value of resolving work from the SD is unquestionably an economic winner; the average cost of $16 per SD resolution can commonly translate to cost avoidance exceeding well overmore » $100. Attempting to extract too much from the SD will likely create a significant downside. The analysis used to develop the value model indicates that the utilization of the SD is very high (approximately 90%).  As a benchmark, consider a comment from a manager at Vitalyst (a commercial IT service desk) that their utilization target is approximately 60%.  While high SD utilization is impressive, over the long term it is likely to cause unwanted consequences to staff such as higher turnover, illness, or burnout.  A better solution is to staff the SD so that analysts have time to improve skills through training, develop knowledge, improve processes, collaborate with peers, and improve customer relationship skills.« less

The AskIT Service Desk: A Model for Improving Productivity and Reducing Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashcraft, Phillip Lynn; Fogle, Blythe G.; Cummings, Susan M.

This was prepared for the business process improvement presentation to the Department of Energy. Los Alamos National Laboratory provides a single point of contact, the AskIT Service Desk, to address issues that impact customer productivity. At the most basic level, what customers want is for their calls to be received, to get a response from a knowledgeable analyst, and to have their issues resolved and their requests fulfilled. Providing a centralized, single point of contact service desk makes initiating technical or business support simple for the customer and improves the odds of immediately resolving the issue or correctly escalating themore » request to the next support level when necessary. Fulfilling customer requests through automated workflow also improves customer productivity and reduces costs. Finally, customers should be provided the option to solve their own problems through easy access to self-help resources such as frequently asked questions (FAQs) and how-to guides. To accomplish this, everyone who provides and supports services must understand how these processes and functions work together. Service providers and those who support services must “speak the same language” and share common objectives. The Associate Directorate for Business Innovation (ADBI) began the journey to improve services by selecting a known service delivery framework (Information Technology Infrastructure Library, or ITIL). From this framework, components that contribute significant business value were selected.« less

A motion capture library for the study of identity, gender, and emotion perception from biological motion.

PubMed

Ma, Yingliang; Paterson, Helena M; Pollick, Frank E

2006-02-01

We present the methods that were used in capturing a library of human movements for use in computer-animated displays of human movement. The library is an attempt to systematically tap into and represent the wide range of personal properties, such as identity, gender, and emotion, that are available in a person's movements. The movements from a total of 30 nonprofessional actors (15 of them female) were captured while they performed walking, knocking, lifting, and throwing actions, as well as their combination in angry, happy, neutral, and sad affective styles. From the raw motion capture data, a library of 4,080 movements was obtained, using techniques based on Character Studio (plug-ins for 3D Studio MAX, AutoDesk, Inc.), MATLAB The MathWorks, Inc.), or a combination of these two. For the knocking, lifting, and throwing actions, 10 repetitions of the simple action unit were obtained for each affect, and for the other actions, two longer movement recordings were obtained for each affect. We discuss the potential use of the library for computational and behavioral analyses of movement variability, of human character animation, and of how gender, emotion, and identity are encoded and decoded from human movement.

Mitigating Cybersecurity Risks.

PubMed

Rose, Rachel V; Kass, Joseph S

2017-04-01

Cybersecurity issues and their impact on compliance with the Health Insurance Portability and Accountability Act (HIPAA) and the Health Information Technology for Economic and Clinical Health (HITECH) Act are becoming more of an enforcement focus for a variety of government agencies, including the US Department of Health and Human Services, the Federal Trade Commission, and the Department of Justice. In the case presented in this article, a nurse in a neurology practice opted to speak with a patient about human immunodeficiency virus testing procedures in a manner audible to others in the waiting room. Computer screens with patient information were visible to anyone approaching a desk, the staff had not been trained on cybersecurity issues, and malware infected the computers used in the practice. In light of these circumstances and the launch of Phase 2 of the HIPAA Audit Program by the US Department of Health and Human Services Office for Civil Rights, the neurology practice must consider the following questions. First, could the gaps in the technical, administrative, and physical requirements of HIPAA and the HITECH Act result in an adverse audit and penalties? Second, what course of action does the law mandate in response to a ransomware attack?

NNLO corrections to top-pair production at hadron colliders: the all-fermionic scattering channels

NASA Astrophysics Data System (ADS)

Czakon, Michal; Mitov, Alexander

2012-12-01

This is a second paper in our ongoing calculation of the next-to-next-to-leading order (NNLO) QCD correction to the total inclusive top-pair production cross-section at hadron colliders. In this paper we calculate the reaction qoverline{q}to toverline{t}+qoverline{q} which was not considered in our previous work on qoverline{q}to toverline{t}+X [1] due to its phenomenologically negligible size. We also calculate all remaining fermion-pair-initiated partonic channels q{q^' }} , q{{overline{q}}^' }} and qq that contribute to top-pair production starting from NNLO. The contributions of these reactions to the total cross-section for top-pair production at the Tevatron and LHC are small, at the permil level. The most interesting feature of these reactions is their characteristic logarithmic rise in the high energy limit. We compute the constant term in the leading power behavior in this limit, and achieve precision that is an order of magnitude better than the precision of a recent theoretical prediction for this constant. All four partonic reactions computed in this paper are included in our numerical program Top++. The calculation of the NNLO corrections to the two remaining partonic reactions, qgto toverline{t}+X and ggto toverline{t}+X , is ongoing.

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Modeling Center NOAA Center for Weather and Climate Prediction (NCWCP) 5830 University Research Court

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Climate Prediction (NCWCP) 5830 University Research Court College Park, MD 20740 Page Author: EMC

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Environmental Modeling Center NOAA Center for Weather and Climate Prediction (NCWCP) 5830 University Research

Current and Future Development of a Non-hydrostatic Unified Atmospheric Model (NUMA)

DTIC Science & Technology

2010-09-09

following capabilities: 1.  Highly scalable on current and future computer architectures ( exascale computing and beyond and GPUs) 2.  Flexibility... Exascale Computing •  10 of Top 500 are already in the Petascale range •  Should also keep our eyes on GPUs (e.g., Mare Nostrum) 2.  Numerical

DOE Advanced Scientific Computing Advisory Subcommittee (ASCAC) Report: Top Ten Exascale Research Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, Robert; Ang, James; Bergman, Keren

2014-02-10

Exascale computing systems are essential for the scientific fields that will transform the 21st century global economy, including energy, biotechnology, nanotechnology, and materials science. Progress in these fields is predicated on the ability to perform advanced scientific and engineering simulations, and analyze the deluge of data. On July 29, 2013, ASCAC was charged by Patricia Dehmer, the Acting Director of the Office of Science, to assemble a subcommittee to provide advice on exascale computing. This subcommittee was directed to return a list of no more than ten technical approaches (hardware and software) that will enable the development of a systemmore » that achieves the Department's goals for exascale computing. Numerous reports over the past few years have documented the technical challenges and the non¬-viability of simply scaling existing computer designs to reach exascale. The technical challenges revolve around energy consumption, memory performance, resilience, extreme concurrency, and big data. Drawing from these reports and more recent experience, this ASCAC subcommittee has identified the top ten computing technology advancements that are critical to making a capable, economically viable, exascale system.« less

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Prediction (NCWCP) 5830 University Research Court College Park, MD 20740 Page Author: EMC Webmaster Page

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Weather and Climate Prediction (NCWCP) 5830 University Research Court College Park, MD 20740 Page Author

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Center for Weather and Climate Prediction (NCWCP) 5830 University Research Court College Park, MD 20740

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar for Weather and Climate Prediction (NCWCP) 5830 University Research Court College Park, MD 20740 Page

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar ) 5830 University Research Court College Park, MD 20740 Page Author: EMC Webmaster Page generated:Sunday

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Center NOAA Center for Weather and Climate Prediction (NCWCP) 5830 University Research Court College Park

Spider Veins

MedlinePlus

... at a desk or during long car or plane trips . Assume all treatments will work . Speak to ... with equivalent training and experience? Was my medical history taken? Was I given an initial evaluation to ...

TOP500 Supercomputers for June 2003

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack

2003-06-23

21st Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 21st edition of the TOP500 list of the world's fastest supercomputers was released today (June 23, 2003). The Earth Simulator supercomputer built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan, with its Linpack benchmark performance of 35.86 Tflop/s (teraflops or trillions of calculations per second), retains the number one position. The number 2 position is held by the re-measured ASCI Q system at Los Alamosmore » National Laboratory. With 13.88 Tflop/s, it is the second system ever to exceed the 10 Tflop/smark. ASCIQ was built by Hewlett-Packard and is based on the AlphaServerSC computer system.« less

Point-to-point people with purpose—Exploring the possibility of a commercial traveler market for point-to-point suborbital space transportation

NASA Astrophysics Data System (ADS)

Webber, Derek

2013-12-01

An argument was made at the First Arcachon Conference on Private Human Access to Space in 2008 [1] that some systematic market research should be conducted into potential market segments for point-to-point suborbital space transportation (PtP), in order to understand whether a commercial market exists which might augment possible government use for such a vehicle. The cargo market potential was subsequently addressed via desk research, and the results, which resulted in a pessimistic business case outlook, were presented in [2]. The same desk research approach is now used in this paper to address the potential business and wealthy individual passenger traveler market segment ("point-to-point people with purpose"). The results, with the assumed ticket pricing, are not encouraging.

15. NBS TOP SIDE CONTROL ROOM. THE SUIT SYSTEMS CONSOLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. NBS TOP SIDE CONTROL ROOM. THE SUIT SYSTEMS CONSOLE IS USED TO CONTROL AIR FLOW AND WATER FLOW TO THE UNDERWATER SPACE SUIT DURING THE TEST. THE SUIT SYSTEMS ENGINEER MONITORS AIR FLOW ON THE PANEL TO THE LEFT, AND SUIT DATA ON THE COMPUTER MONITOR JUST SLIGHTLY TO HIS LEFT. WATER FLOW IS MONITORED ON THE PANEL JUST SLIGHTLY TO HIS RIGHT AND TEST VIDEO TO HIS FAR RIGHT. THE DECK CHIEF MONITORS THE DIVER'S DIVE TIMES ON THE COMPUTER IN THE UPPER RIGHT. THE DECK CHIEF LOGS THEM IN AS THEY ENTER THE WATER, AND LOGS THEM OUT AS THEY EXIT THE WATER. THE COMPUTER CALCULATES TOTAL DIVE TIME. - Marshall Space Flight Center, Neutral Buoyancy Simulator Facility, Rideout Road, Huntsville, Madison County, AL

76 FR 26685 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... and activities available for processing workers, whether or not the company provides meals for the... organizations. Frequency: One time. Respondent's Obligation: Voluntary. OMB Desk Officer: [email protected

76 FR 4873 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

...). Title: Third-Party Submissions and Protests (formerly Green Technology Pilot Program). Form Number(s... retain benefits. OMB Desk Officer: Nicholas A. Fraser, e-mail: [email protected] . Once...

75 FR 8294 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... technological collection techniques or other forms of information technology should be addressed to: Desk... to reorganize the farming operation or refinance USDA and non-USDA creditors. The information...

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar University Research Court College Park, MD 20740 Page Author: EMC Webmaster Page generated:Sunday, 27-May

10 CFR 40.5 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: ATTN: Document Control Desk, Director, Office of Federal and State Materials and Environmental... electronic submissions can be obtained by visiting the NRC's Web site at http://www.nrc.gov/site-help/e...

50 CFR 86.16 - What are the information collection requirements?

Code of Federal Regulations, 2012 CFR

2012-10-01

... THE INTERIOR (CONTINUED) FINANCIAL ASSISTANCE-WILDLIFE SPORT FISH RESTORATION PROGRAM BOATING... Management and Budget, Department of Interior, Desk Officer, 1849 C Street, NW., Washington, DC 20503. An...

50 CFR 86.16 - What are the information collection requirements?

Code of Federal Regulations, 2011 CFR

2011-10-01

... THE INTERIOR (CONTINUED) FINANCIAL ASSISTANCE-WILDLIFE SPORT FISH RESTORATION PROGRAM BOATING... Management and Budget, Department of Interior, Desk Officer, 1849 C Street, NW., Washington, DC 20503. An...

77 FR 19417 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

..., Attention: Desk Officer for Treasury, New Executive Office Building, Room 10235, Washington, DC 20503, or... label applications to prevent consumer deception and to deter falsification of unfair advertising...

A Compact "Water Window" Microscope with 60 nm Spatial Resolution for Applications in Biology and Nanotechnology.

PubMed

Wachulak, Przemyslaw; Torrisi, Alfio; Nawaz, Muhammad F; Bartnik, Andrzej; Adjei, Daniel; Vondrová, Šárka; Turňová, Jana; Jančarek, Alexandr; Limpouch, Jiří; Vrbová, Miroslava; Fiedorowicz, Henryk

2015-10-01

Short illumination wavelength allows an extension of the diffraction limit toward nanometer scale; thus, improving spatial resolution in optical systems. Soft X-ray (SXR) radiation, from "water window" spectral range, λ=2.3-4.4 nm wavelength, which is particularly suitable for biological imaging due to natural optical contrast provides better spatial resolution than one obtained with visible light microscopes. The high contrast in the "water window" is obtained because of selective radiation absorption by carbon and water, which are constituents of the biological samples. The development of SXR microscopes permits the visualization of features on the nanometer scale, but often with a tradeoff, which can be seen between the exposure time and the size and complexity of the microscopes. Thus, herein, we present a desk-top system, which overcomes the already mentioned limitations and is capable of resolving 60 nm features with very short exposure time. Even though the system is in its initial stage of development, we present different applications of the system for biology and nanotechnology. Construction of the microscope with recently acquired images of various samples will be presented and discussed. Such a high resolution imaging system represents an interesting solution for biomedical, material science, and nanotechnology applications.

Probing top-Z dipole moments at the LHC and ILC

DOE PAGES

Röntsch, Raoul; Schulze, Markus

2015-08-11

We investigate the weak electric and magnetic dipole moments of top quark-Z boson interactions at the Large Hadron Collider (LHC) and the International Linear Collider (ILC). Their vanishingly small magnitude in the Standard Model makes these couplings ideal for probing New Physics interactions and for exploring the role of top quarks in electroweak symmetry breaking. In our analysis, we consider the production of two top quarks in association with a Z boson at the LHC, and top quark pairs mediated by neutral gauge bosons at the ILC. These processes yield direct sensitivity to top quark-Z boson interactions and complement indirectmore » constraints from electroweak precision data. Our computation is accurate to next-to-leading order in QCD, we include the full decay chain of top quarks and the Z boson, and account for theoretical uncertainties in our constraints. Furthermore, we find that LHC experiments will soon be able to probe weak dipole moments for the first time.« less

Backpack Safety (For Parents)

MedlinePlus

... backaches because they're lugging around their entire locker's worth of books, school supplies, and personal items ... rests with kids: Encourage kids to use their locker or desk often throughout the day instead of ...

Staff - Linda D. Natrop | Alaska Division of Geological & Geophysical

Science.gov Websites

DGGS library, timesheet processing, state credit card accounting, public information desk, mail and postage, vehicle coordinator, property records, maintain supplies, and other administrative duties as

Search the SLAC Web

Science.gov Websites

for results of SLAC Intranet searches. Search Tips Technique Example Finds Results That: word want exact matches on words, for example, names of people, places, or organizations. words help desk

10 CFR 70.5 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to: ATTN: Document Control Desk, Director, Office of Nuclear Material Safety and Safeguards or... electronic submissions can be obtained by visiting the NRC's Web site at http://www.nrc.gov/site-help/e...

10 CFR 95.9 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: (a) By mail addressed to: ATTN: Document Control Desk, Director, Division of Security Operations....gov/site-help/e-submittals.html; by e-mail to [email protected]; or by writing the Office of...

50 CFR 86.16 - What are the information collection requirements?

Code of Federal Regulations, 2013 CFR

2013-10-01

... THE INTERIOR (CONTINUED) FINANCIAL ASSISTANCE-WILDLIFE AND SPORT FISH RESTORATION PROGRAM BOATING... Management and Budget, Department of Interior, Desk Officer, 1849 C Street, NW., Washington, DC 20503. An...

77 FR 64591 - Notice and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-22

... determinations regarding the size of a railroad helps the Board minimize the reporting burden for smaller... and Regulatory Affairs, Attention: Patrick Fuchs, Surface Transportation Board Desk Officer, by fax at...

75 FR 63145 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

... fishing vessels. Deferred taxes are recaptured by reducing an agreement vessel's basis for depreciation by... obtain or retain benefits. OMB Desk Officer: [email protected] . Copies of the above...

Who uses height-adjustable desks? - Sociodemographic, health-related, and psycho-social variables of regular users.

PubMed

Wallmann-Sperlich, Birgit; Bipp, Tanja; Bucksch, Jens; Froboese, Ingo

2017-03-06

Sit-to-stand height-adjustable desks (HAD) may promote workplace standing, as long as workers use them on a regular basis. The aim of this study was to investigate (i) how common HAD in German desk-based workers are, and how frequently HADs are used, (ii) to identify sociodemographic, health-related, and psycho-social variables of workday sitting including having a HAD, and (iii) to analyse sociodemographic, health-related, and psycho-social variables of users and non-users of HADs. A cross-sectional sample of 680 participants (51.9% men; 41.0 ± 13.1 years) in a desk-based occupation was interviewed by telephone about their occupational sitting and standing proportions, having and usage of a HAD, and answered questions concerning psycho-social variables of occupational sitting. The proportion of workday sitting was calculated for participants having an HAD (n = 108) and not-having an HAD (n = 573), as well as for regular users of HAD (n = 54), and irregular/non-users of HAD (n = 54). Linear regressions were conducted to calculate associations between socio-demographic, health-related, psychosocial variables and having/not having an HAD, and the proportion of workday sitting. Logistic regressions were executed to examine the association of mentioned variables and participants' usage of HADs. Sixteen percent report that they have an HAD, and 50% of these report regular use of HAD. Having an HAD is not a correlate of the proportion of workday sitting. Further analysis restricted to participants having available a HAD highlights that only the 'perceived advantages of sitting less' was significantly associated with HAD use in the fully adjusted model (OR 1.75 [1.09; 2.81], p < 0.05). The present findings indicate that accompanying behavioral action while providing an HAD is promising to increase the regular usage of HAD. Hence, future research needs to address the specificity of behavioral actions in order to enhance regular HAD use, and needs to give more fundamental insights into these associations.

Programming Support Library (PSL). Users Manual.

DTIC Science & Technology

1978-05-01

which provides the tools to organize, implement, and control computer program develop- ment. This involves the support of the actual programming process...provides the tools toorganize, implement, and control computer program development. The system is designed specifically to support top-down development...Structured Programming are finding increasing application in the computing community. Structured programs are, however, difficult to write in

Computer Science Education in the People's Republic of China.

ERIC Educational Resources Information Center

Maier, John H.

1986-01-01

China will suffer into the future from a shortage of computer professionals. With 75% of her population engaged in agriculture, she has only about 100,000 computer professionals, which is less than can be found within a healthy radius of Stanford University. There are 97 "key universities," but only 10 or 15 stand at the top as the…

TOP500 Supercomputers for November 2003

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack

2003-11-16

22nd Edition of TOP500 List of World s Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 22nd edition of the TOP500 list of the worlds fastest supercomputers was released today (November 16, 2003). The Earth Simulator supercomputer retains the number one position with its Linpack benchmark performance of 35.86 Tflop/s (''teraflops'' or trillions of calculations per second). It was built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan.

NNLO QCD corrections to the polarized top quark decay t (↑)→Xb+W+

NASA Astrophysics Data System (ADS)

Czarnecki, A.; Groote, S.; Körner, J. G.; Piclum, J. H.

2018-05-01

We compute the next-to-next-to-leading order (NNLO) QCD corrections to the decay t (↑)→Xb+W+ of a polarized top quark. The spin-momentum correlation in this quasi two-body decay is described by the polar angle distribution d Γ /d cos θP=Γ/2 (1 +PtαPcos θP) , where Pt is the polarization of the top quark and αP denotes the asymmetry parameter of the decay. For the latter we find αPNNLO=0.3792 ±0.0037 .

Electroweak radiative corrections to the top quark decay

NASA Astrophysics Data System (ADS)

Kuruma, Toshiyuki

1993-12-01

The top quark, once produced, should be an important window to the electroweak symmetry breaking sector. We compute electroweak radiative corrections to the decay process t→b+W + in order to extract information on the Higgs sector and to fix the background in searches for a possible new physics contribution. The large Yukawa coupling of the top quark induces a new form factor through vertex corrections and causes discrepancy from the tree-level longitudinal W-boson production fraction, but the effect is of order 1% or less for m H<1 TeV.

HPGMG 1.0: A Benchmark for Ranking High Performance Computing Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, Mark; Brown, Jed; Shalf, John

2014-05-05

This document provides an overview of the benchmark ? HPGMG ? for ranking large scale general purpose computers for use on the Top500 list [8]. We provide a rationale for the need for a replacement for the current metric HPL, some background of the Top500 list and the challenges of developing such a metric; we discuss our design philosophy and methodology, and an overview of the specification of the benchmark. The primary documentation with maintained details on the specification can be found at hpgmg.org and the Wiki and benchmark code itself can be found in the repository https://bitbucket.org/hpgmg/hpgmg.

Automatic analysis of stereoscopic satellite image pairs for determination of cloud-top height and structure

NASA Technical Reports Server (NTRS)

Hasler, A. F.; Strong, J.; Woodward, R. H.; Pierce, H.

1991-01-01

Results are presented on an automatic stereo analysis of cloud-top heights from nearly simultaneous satellite image pairs from the GOES and NOAA satellites, using a massively parallel processor computer. Comparisons of computer-derived height fields and manually analyzed fields show that the automatic analysis technique shows promise for performing routine stereo analysis in a real-time environment, providing a useful forecasting tool by augmenting observational data sets of severe thunderstorms and hurricanes. Simulations using synthetic stereo data show that it is possible to automatically resolve small-scale features such as 4000-m-diam clouds to about 1500 m in the vertical.

NNLO QCD predictions for fully-differential top-quark pair production at the Tevatron

NASA Astrophysics Data System (ADS)

Czakon, Michal; Fiedler, Paul; Heymes, David; Mitov, Alexander

2016-05-01

We present a comprehensive study of differential distributions for Tevatron top-pair events at the level of stable top quarks. All calculations are performed in NNLO QCD with the help of a fully differential partonic Monte-Carlo and are exact at this order in perturbation theory. We present predictions for all kinematic distributions for which data exists. Particular attention is paid on the top-quark forward-backward asymmetry which we study in detail. We compare the NNLO results with existing approximate NNLO predictions as well as differential distributions computed with different parton distribution sets. Theory errors are significantly smaller than current experimental ones with overall agreement between theory and data.

Preliminary skyshine calculations for the Poloidal Diverter Tokamak Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigg, D.W.; Wheeler, F.J.

1981-01-01

The Poloidal Diverter Experiment (PDX) facility at Princeton University is the first operating tokamak to require substantial radiation shielding. A calculational model has been developed to estimate the radiation dose in the PDX control room and at the site boundary due to the skyshine effect. An efficient one-dimensional method is used to compute the neutron and capture gamma leakage currents at the top surface of the PDX roof shield. This method employs an S /SUB n/ calculation in slab geometry and, for the PDX, is superior to spherical models found in the literature. If certain conditions are met, the slabmore » model provides the exact probability of leakage out the top surface of the roof for fusion source neutrons and for capture gamma rays produced in the PDX floor and roof shield. The model also provides the correct neutron and capture gamma leakage current spectra and angular distributions, averaged over the top roof shield surface. For the PDX, this method is nearly as accurate as multidimensional techniques for computing the roof leakage and is much less costly. The actual neutron skyshine dose is computed using a Monte Carlo model with the neutron source at the roof surface obtained from the slab S /SUB n/ calculation. The capture gamma dose is computed using a simple point-kernel single-scatter method.« less

10 CFR 73.4 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: Document Control Desk, Director, Office of Nuclear Reactor Regulation, Director, Office of New Reactors...://www.nrc.gov/site-help/e-submittals.html; by e-mail to [email protected]; or by writing the Office...

77 FR 65054 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

..., Attention: Desk Officer for Treasury, New Executive Office Building, Room 10235, Washington, DC 20503, or... approved collection. Title: Liquors and Articles from Puerto Rico or the Virgin Islands. Abstract: The...

Choking and Strangulation Prevention Tips

MedlinePlus

... away from children. These include magnets found in construction sets, children's toys or stress-relieving adult desk ... with Us Donate Join Our Mailing List Global Road Safety Sponsors Recalls Media Center Blog Videos Newsletter ...

Using Google Applications as Part of Cloud Computing to Improve Knowledge and Teaching Skills of Faculty Members at the University of Bisha, Bisha, Saudi Arabia

ERIC Educational Resources Information Center

Alshihri, Bandar A.

2017-01-01

Cloud computing is a recent computing paradigm that has been integrated into the educational system. It provides numerous opportunities for delivering a variety of computing services in a way that has not been experienced before. The Google Company is among the top business companies that afford their cloud services by launching a number of…

Deformation of Attractor Landscape via Cholinergic Presynaptic Modulations: A Computational Study Using a Phase Neuron Model

PubMed Central

Kanamaru, Takashi; Fujii, Hiroshi; Aihara, Kazuyuki

2013-01-01

Corticopetal acetylcholine (ACh) is released transiently from the nucleus basalis of Meynert (NBM) into the cortical layers and is associated with top-down attention. Recent experimental data suggest that this release of ACh disinhibits layer 2/3 pyramidal neurons (PYRs) via muscarinic presynaptic effects on inhibitory synapses. Together with other possible presynaptic cholinergic effects on excitatory synapses, this may result in dynamic and temporal modifications of synapses associated with top-down attention. However, the system-level consequences and cognitive relevance of such disinhibitions are poorly understood. Herein, we propose a theoretical possibility that such transient modifications of connectivity associated with ACh release, in addition to top-down glutamatergic input, may provide a neural mechanism for the temporal reactivation of attractors as neural correlates of memories. With baseline levels of ACh, the brain returns to quasi-attractor states, exhibiting transitive dynamics between several intrinsic internal states. This suggests that top-down attention may cause the attention-induced deformations between two types of attractor landscapes: the quasi-attractor landscape (Q-landscape, present under low-ACh, non-attentional conditions) and the attractor landscape (A-landscape, present under high-ACh, top-down attentional conditions). We present a conceptual computational model based on experimental knowledge of the structure of PYRs and interneurons (INs) in cortical layers 1 and 2/3 and discuss the possible physiological implications of our results. PMID:23326520

The energy expenditure of using a "walk-and-work" desk for office workers with obesity.

PubMed

Levine, James A; Miller, Jennifer M

2007-09-01

For many people, most of the working day is spent sitting in front of a computer screen. Approaches for obesity treatment and prevention are being sought to increase workplace physical activity because low levels of physical activity are associated with obesity. Our hypothesis was that a vertical workstation that allows an obese individual to work while walking would be associated with significant and substantial increases in energy expenditure over seated work. The vertical workstation is a workstation that allows an office worker to use a standard personal computer while walking on a treadmill at a self-selected velocity. 15 sedentary individuals with obesity (14 women, one man; 43 (7.5) years, 86 (9.6) kg; body mass index 32 (2.6) kg/m(2)) underwent measurements of energy expenditure at rest, seated working in an office chair, standing and while walking at a self-selected speed using the vertical workstation. Body composition was measured using dual x ray absorptiometry. The mean (SD) energy expenditure while seated at work in an office chair was 72 (10) kcal/h, whereas the energy expenditure while walking and working at a self-selected velocity of 1.1 (0.4) mph was 191 (29) kcal/h. The mean (SD) increase in energy expenditure for walking-and-working over sitting was 119 (25) kcal/h. If sitting computer-time were replaced by walking-and-working, energy expenditure could increase by 100 kcal/h. Thus, if obese individuals were to replace time spent sitting at the computer with walking computer time by 2-3 h/day, and if other components of energy balance were constant, a weight loss of 20-30 kg/year could occur.

78 FR 11272 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... and Budget, Attention: Desk Officer for Treasury, New Executive Office Building, Room 10235... for Spin-Off Rulings. Abstract: This revenue procedure updates Rev. Proc. 96-30, which sets forth in a...

Hanford tanks initiative (HTI) configuration management desk instruction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaus, P.S., Fluor Daniel Hanford

The purpose of the document is to provide working level directions for submitting requirements, making changes to the requirements database, and entering Project documentation into the HTI Project information and document management system.

78 FR 52127 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-22

... (Previously noted in the 60-day Federal Register as Web-based Supply and Chain Management System Offer Forms... to: Desk Officer for Agriculture, Office of Information and Regulatory Affairs, Office of Management...

HubbleSite - Out of the ordinary...out of this world.

Science.gov Websites

Toggle navigation Home News Images Videos Blogs Explore Discoveries Astronomy Technology Education ! Email list: Inbox Astronomy Servicing Missions Reference Desk eBooks WebbTelescope Amazing Space

Desk Reference to the Toolkit for Assessing Potential Allegations of Environmental Injustice

EPA Pesticide Factsheets

This document provides an overview of tools and other reference materials to assist U.S. Environmental Protection Agency (EPA) personnel in assessing and addressing potential allegations of environmental injustice.

10 CFR 74.6 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to: ATTN: Document Control Desk, Director of Nuclear Material Safety and Safeguards, U.S. Nuclear... visiting the NRC's Web site at http://www.nrc.gov/site-help/e-submittals.html; by e-mail to MSHD.Resource...

Faculty and Staff Resources | Nova Southeastern University

Science.gov Websites

clinical research at NSU, as well as technology transfer. Libraries Serving Broward County residents as Service Desk Wireless Access Opinio Email Additional Technology Resources The Office of Innovation and

Connected Vehicle Impacts on Transportation Planning—Desk Reference.

DOT National Transportation Integrated Search

2016-06-01

The principal objective of this project, Connected Vehicle Impacts on Transportation Planning, is to comprehensively assess how connected vehicles should be considered across the range of transportation planning processes and products developed...

The Revolution's on Your Desk.

ERIC Educational Resources Information Center

Erickson, Bruce

1987-01-01

The use of desktop publishing at schools, colleges, and universities is described. The advantages include: shorter turnaround, reduced costs, more control and capability, and more fun. However, rapid change and quick obsolescence are inevitable. (MLW)

77 FR 75252 - 30-Day Notice of Proposed Information Collection: Application for Employment as a Locally...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

...-5806. Attention: Desk Officer for Department of State. FOR FURTHER INFORMATION CONTACT: Direct requests... Mission- advertised positions throughout the world. Mission recruitments generate [[Page 75253...