36 CFR 1194.26 - Desktop and portable computers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Desktop and portable computers. 1194.26 Section 1194.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION... § 1194.26 Desktop and portable computers. (a) All mechanically operated controls and keys shall comply...

36 CFR 1194.26 - Desktop and portable computers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Desktop and portable computers. 1194.26 Section 1194.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION... § 1194.26 Desktop and portable computers. (a) All mechanically operated controls and keys shall comply...

Evaluation of Computational Codes for Underwater Hull Analysis Model Applications

DTIC Science & Technology

2014-02-05

desirable that the code can be run on a Windows operating system on the laptop, desktop, or workstation. The focus on Windows machines allows for...transition to such systems as operated on the Navy-Marine Corp Internet (NMCI). For each code the initial cost and yearly maintenance are identified...suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports

Model Analyst’s Toolkit User Guide, Version 7.1.0

DTIC Science & Technology

2015-08-01

Help > About)  Environment details ( operating system )  metronome.log file, located in your MAT 7.1.0 installation folder  Any log file that...requirements to run the Model Analyst’s Toolkit:  Windows XP operating system (or higher) with Service Pack 2 and all critical Windows updates installed...application icon on your desktop  Create a Quick Launch icon – Creates a MAT application icon on the taskbar for operating systems released

Evaluating virtual hosted desktops for graphics-intensive astronomy

NASA Astrophysics Data System (ADS)

Meade, B. F.; Fluke, C. J.

2018-04-01

Visualisation of data is critical to understanding astronomical phenomena. Today, many instruments produce datasets that are too big to be downloaded to a local computer, yet many of the visualisation tools used by astronomers are deployed only on desktop computers. Cloud computing is increasingly used to provide a computation and simulation platform in astronomy, but it also offers great potential as a visualisation platform. Virtual hosted desktops, with graphics processing unit (GPU) acceleration, allow interactive, graphics-intensive desktop applications to operate co-located with astronomy datasets stored in remote data centres. By combining benchmarking and user experience testing, with a cohort of 20 astronomers, we investigate the viability of replacing physical desktop computers with virtual hosted desktops. In our work, we compare two Apple MacBook computers (one old and one new, representing hardware and opposite ends of the useful lifetime) with two virtual hosted desktops: one commercial (Amazon Web Services) and one in a private research cloud (the Australian NeCTAR Research Cloud). For two-dimensional image-based tasks and graphics-intensive three-dimensional operations - typical of astronomy visualisation workflows - we found that benchmarks do not necessarily provide the best indication of performance. When compared to typical laptop computers, virtual hosted desktops can provide a better user experience, even with lower performing graphics cards. We also found that virtual hosted desktops are equally simple to use, provide greater flexibility in choice of configuration, and may actually be a more cost-effective option for typical usage profiles.

ORION Environmental Control and Life Support Systems Suit Loop and Pressure Control Analysis

NASA Technical Reports Server (NTRS)

Eckhardt, Brad; Conger, Bruce; Stambaugh, Imelda C.

2015-01-01

Under NASA's ORION Multi-Purpose Crew Vehicle (MPCV) Environmental Control and Life Support System (ECLSS) Project at Johnson Space Center's (JSC), the Crew and Thermal Systems Division has developed performance models of the air system using Thermal Desktop/FloCAD. The Thermal Desktop model includes an Air Revitalization System (ARS Loop), a Suit Loop, a Cabin Loop, and Pressure Control System (PCS) for supplying make-up gas (N2 and O2) to the Cabin and Suit Loop. The ARS and PCS are designed to maintain air quality at acceptable O2, CO2 and humidity levels as well as internal pressures in the vehicle Cabin and during suited operations. This effort required development of a suite of Thermal Desktop Orion ECLSS models to address the need for various simulation capabilities regarding ECLSS performance. An initial highly detailed model of the ARS Loop was developed in order to simulate rapid pressure transients (water hammer effects) within the ARS Loop caused by events such as cycling of the Pressurized Swing Adsorption (PSA) Beds and required high temporal resolution (small time steps) in the model during simulation. A second ECLSS model was developed to simulate events which occur over longer periods of time (over 30 minutes) where O2, CO2 and humidity levels, as well as internal pressures needed to be monitored in the cabin and for suited operations. Stand-alone models of the PCS and the Negative Pressure relief Valve (NPRV) were developed to study thermal effects within the PCS during emergency scenarios (Cabin Leak) and cabin pressurization during vehicle re-entry into Earth's atmosphere. Results from the Orion ECLSS models were used during Orion Delta-PDR (July, 2014) to address Key Design Requirements (KDR's) for Suit Loop operations for multiple mission scenarios.

A System Engineering Study and Concept Development for a Humanitarian Aid and Disaster Relief Operations Management Platform

DTIC Science & Technology

2016-09-01

and network. The computing and network hardware are identified and include routers, servers, firewalls, laptops , backup hard drives, smart phones...deployable hardware units will be necessary. This includes the use of ruggedized laptops and desktop computers , a projector system, communications system...ENGINEERING STUDY AND CONCEPT DEVELOPMENT FOR A HUMANITARIAN AID AND DISASTER RELIEF OPERATIONS MANAGEMENT PLATFORM by Julie A. Reed September

36 CFR § 1194.26 - Desktop and portable computers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Desktop and portable computers. § 1194.26 Section § 1194.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION... § 1194.26 Desktop and portable computers. (a) All mechanically operated controls and keys shall comply...

Automated micromanipulation desktop station based on mobile piezoelectric microrobots

NASA Astrophysics Data System (ADS)

Fatikow, Sergej

1996-12-01

One of the main problems of present-day research on microsystem technology (MST) is to assemble a whole micro- system from different microcomponents. This paper presents a new concept of an automated micromanipulation desktop- station including piezoelectrically driven microrobots placed on a high-precise x-y-stage of a light microscope, a CCD-camera as a local sensor subsystem, a laser sensor unit as a global sensor subsystem, a parallel computer system with C167 microcontrollers, and a Pentium PC equipped additionally with an optical grabber. The microrobots can perform high-precise manipulations (with an accuracy of up to 10 nm) and a nondestructive transport (at a speed of about 3 cm/sec) of very small objects under the microscope. To control the desktop-station automatically, an advanced control system that includes a task planning level and a real-time execution level is being developed. The main function of the task planning sub-system is to interpret the implicit action plan and to generate a sequence of explicit operations which are sent to the execution level of the control system. The main functions of the execution control level are the object recognition, image processing and feedback position control of the microrobot and the microscope stage.

Addressing Small Computers in the First OS Course

ERIC Educational Resources Information Center

Nutt, Gary

2006-01-01

Small computers are emerging as important components of the contemporary computing scene. Their operating systems vary from specialized software for an embedded system to the same style of OS used on a generic desktop or server computer. This article describes a course in which systems are classified by their hardware capability and the…

Desktop publishing and medical imaging: paper as hardcopy medium for digital images.

PubMed

Denslow, S

1994-08-01

Desktop-publishing software and hardware has progressed to the point that many widely used word-processing programs are capable of printing high-quality digital images with many shades of gray from black to white. Accordingly, it should be relatively easy to print digital medical images on paper for reports, instructional materials, and in research notes. Components were assembled that were necessary for extracting image data from medical imaging devices and converting the data to a form usable by word-processing software. A system incorporating these components was implemented in a medical setting and has been operating for 18 months. The use of this system by medical staff has been monitored.

Nanoimaging using soft X-ray and EUV laser-plasma sources

NASA Astrophysics Data System (ADS)

Wachulak, Przemyslaw; Torrisi, Alfio; Ayele, Mesfin; Bartnik, Andrzej; Czwartos, Joanna; Węgrzyński, Łukasz; Fok, Tomasz; Fiedorowicz, Henryk

2018-01-01

In this work we present three experimental, compact desk-top imaging systems: SXR and EUV full field microscopes and the SXR contact microscope. The systems are based on laser-plasma EUV and SXR sources based on a double stream gas puff target. The EUV and SXR full field microscopes, operating at 13.8 nm and 2.88 nm wavelengths are capable of imaging nanostructures with a sub-50 nm spatial resolution and short (seconds) exposure times. The SXR contact microscope operates in the "water-window" spectral range and produces an imprint of the internal structure of the imaged sample in a thin layer of SXR sensitive photoresist. Applications of such desk-top EUV and SXR microscopes, mostly for biological samples (CT26 fibroblast cells and Keratinocytes) are also presented. Details about the sources, the microscopes as well as the imaging results for various objects will be presented and discussed. The development of such compact imaging systems may be important to the new research related to biological, material science and nanotechnology applications.

A VM-shared desktop virtualization system based on OpenStack

NASA Astrophysics Data System (ADS)

Liu, Xi; Zhu, Mingfa; Xiao, Limin; Jiang, Yuanjie

2018-04-01

With the increasing popularity of cloud computing, desktop virtualization is rising in recent years as a branch of virtualization technology. However, existing desktop virtualization systems are mostly designed as a one-to-one mode, which one VM can only be accessed by one user. Meanwhile, previous desktop virtualization systems perform weakly in terms of response time and cost saving. This paper proposes a novel VM-Shared desktop virtualization system based on OpenStack platform. The paper modified the connecting process and the display data transmission process of the remote display protocol SPICE to support VM-Shared function. On the other hand, we propose a server-push display mode to improve user interactive experience. The experimental results show that our system performs well in response time and achieves a low CPU consumption.

System Testing of Desktop and Web Applications

ERIC Educational Resources Information Center

Slack, James M.

2011-01-01

We want our students to experience system testing of both desktop and web applications, but the cost of professional system-testing tools is far too high. We evaluate several free tools and find that AutoIt makes an ideal educational system-testing tool. We show several examples of desktop and web testing with AutoIt, starting with simple…

Desktop Publishing Made Simple.

ERIC Educational Resources Information Center

Wentling, Rose Mary

1989-01-01

The author discusses the types of computer hardware and software necessary to set up a desktop publishing system, both for use in educational administration and for instructional purposes. Classroom applications of desktop publishing are presented. The author also provides guidelines for preparing to teach desktop publishing. (CH)

Desktop Publishing Choices: Making an Appropriate Decision.

ERIC Educational Resources Information Center

Crawford, Walt

1991-01-01

Discusses various choices available for desktop publishing systems. Four categories of software are described, including advanced word processing, graphics software, low-end desktop publishing, and mainstream desktop publishing; appropriate hardware is considered; and selection guidelines are offered, including current and future publishing needs,…

Economic analysis of cloud-based desktop virtualization implementation at a hospital

PubMed Central

2012-01-01

Background Cloud-based desktop virtualization infrastructure (VDI) is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with anydevice. However, the economic validity of investing in the adoption of the system at a hospital has not been established. Methods This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time). Return on investment (ROI), net present value (NPV), and internal rate of return (IRR) indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. Results The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH) showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users), the greater the number of adopted VMs was the more investable the system was. Conclusions This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS) operation and utilization in a tertiary hospital setting. PMID:23110661

Economic analysis of cloud-based desktop virtualization implementation at a hospital.

PubMed

Yoo, Sooyoung; Kim, Seok; Kim, Taeki; Baek, Rong-Min; Suh, Chang Suk; Chung, Chin Youb; Hwang, Hee

2012-10-30

Cloud-based desktop virtualization infrastructure (VDI) is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with any device. However, the economic validity of investing in the adoption of the system at a hospital has not been established. This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time). Return on investment (ROI), net present value (NPV), and internal rate of return (IRR) indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH) showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users), the greater the number of adopted VMs was the more investable the system was. This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS) operation and utilization in a tertiary hospital setting.

Basics of Desktop Publishing. Second Edition.

ERIC Educational Resources Information Center

Beeby, Ellen; Crummett, Jerrie

This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

Massive Query Resolution for Rapid Selective Dissemination of Information.

ERIC Educational Resources Information Center

Cohen, Jonathan D.

1999-01-01

Outlines an efficient approach to performing query resolution which, when matched with a keyword scanner, offers rapid selecting and routing for massive Boolean queries, and which is suitable for implementation on a desktop computer. Demonstrates the system's operation with large examples in a practical setting. (AEF)

Desktop Publishing: Organizational Considerations for Adoption and Implementation. TDC Research Report No. 6.

ERIC Educational Resources Information Center

Lee, Paul

This report explores the implementation of desktop publishing in the Minnesota Extension Service (MES) and provides a framework for its implementation in other organizations. The document begins with historical background on the development of desktop publishing. Criteria for deciding whether to purchase a desktop publishing system, advantages and…

LTCP 2D Graphical User Interface. Application Description and User's Guide

NASA Technical Reports Server (NTRS)

Ball, Robert; Navaz, Homayun K.

1996-01-01

A graphical user interface (GUI) written for NASA's LTCP (Liquid Thrust Chamber Performance) 2 dimensional computational fluid dynamic code is described. The GUI is written in C++ for a desktop personal computer running under a Microsoft Windows operating environment. Through the use of common and familiar dialog boxes, features, and tools, the user can easily and quickly create and modify input files for the LTCP code. In addition, old input files used with the LTCP code can be opened and modified using the GUI. The application is written in C++ for a desktop personal computer running under a Microsoft Windows operating environment. The program and its capabilities are presented, followed by a detailed description of each menu selection and the method of creating an input file for LTCP. A cross reference is included to help experienced users quickly find the variables which commonly need changes. Finally, the system requirements and installation instructions are provided.

Choosing the Right Desktop Publisher.

ERIC Educational Resources Information Center

Eiser, Leslie

1988-01-01

Investigates the many different desktop publishing packages available today. Lists the steps to desktop publishing. Suggests which package to use with specific hardware available. Compares several packages for IBM, Mac, and Apple II based systems. (MVL)

Introducing the CUAHSI Hydrologic Information System Desktop Application (HydroDesktop) and Open Development Community

NASA Astrophysics Data System (ADS)

Ames, D.; Kadlec, J.; Horsburgh, J. S.; Maidment, D. R.

2009-12-01

The Consortium of Universities for the Advancement of Hydrologic Sciences (CUAHSI) Hydrologic Information System (HIS) project includes extensive development of data storage and delivery tools and standards including WaterML (a language for sharing hydrologic data sets via web services); and HIS Server (a software tool set for delivering WaterML from a server); These and other CUASHI HIS tools have been under development and deployment for several years and together, present a relatively complete software “stack” to support the consistent storage and delivery of hydrologic and other environmental observation data. This presentation describes the development of a new HIS software tool called “HydroDesktop” and the development of an online open source software development community to update and maintain the software. HydroDesktop is a local (i.e. not server-based) client side software tool that ultimately will run on multiple operating systems and will provide a highly usable level of access to HIS services. The software provides many key capabilities including data query, map-based visualization, data download, local data maintenance, editing, graphing, data export to selected model-specific data formats, linkage with integrated modeling systems such as OpenMI, and ultimately upload to HIS servers from the local desktop software. As the software is presently in the early stages of development, this presentation will focus on design approach and paradigm and is viewed as an opportunity to encourage participation in the open development community. Indeed, recognizing the value of community based code development as a means of ensuring end-user adoption, this project has adopted an “iterative” or “spiral” software development approach which will be described in this presentation.

GREEN SUPERCOMPUTING IN A DESKTOP BOX

DOE Office of Scientific and Technical Information (OSTI.GOV)

HSU, CHUNG-HSING; FENG, WU-CHUN; CHING, AVERY

2007-01-17

The computer workstation, introduced by Sun Microsystems in 1982, was the tool of choice for scientists and engineers as an interactive computing environment for the development of scientific codes. However, by the mid-1990s, the performance of workstations began to lag behind high-end commodity PCs. This, coupled with the disappearance of BSD-based operating systems in workstations and the emergence of Linux as an open-source operating system for PCs, arguably led to the demise of the workstation as we knew it. Around the same time, computational scientists started to leverage PCs running Linux to create a commodity-based (Beowulf) cluster that provided dedicatedmore » computer cycles, i.e., supercomputing for the rest of us, as a cost-effective alternative to large supercomputers, i.e., supercomputing for the few. However, as the cluster movement has matured, with respect to cluster hardware and open-source software, these clusters have become much more like their large-scale supercomputing brethren - a shared (and power-hungry) datacenter resource that must reside in a machine-cooled room in order to operate properly. Consequently, the above observations, when coupled with the ever-increasing performance gap between the PC and cluster supercomputer, provide the motivation for a 'green' desktop supercomputer - a turnkey solution that provides an interactive and parallel computing environment with the approximate form factor of a Sun SPARCstation 1 'pizza box' workstation. In this paper, they present the hardware and software architecture of such a solution as well as its prowess as a developmental platform for parallel codes. In short, imagine a 12-node personal desktop supercomputer that achieves 14 Gflops on Linpack but sips only 185 watts of power at load, resulting in a performance-power ratio that is over 300% better than their reference SMP platform.« less

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

PubMed

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-12-21

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

Computer assisted yarding cost analysis.

Treesearch

Ronald W. Mifflin

1980-01-01

Programs for a programable calculator and a desk-top computer are provided for quickly determining yarding cost and comparing the economics of alternative yarding systems. The programs emphasize the importance of the relationship between production rate and machine rate, which is the hourly cost of owning and operating yarding equipment. In addition to generating the...

Infrastructure Suitability Assessment Modeling for Cloud Computing Solutions

DTIC Science & Technology

2011-09-01

Virtualization vs . Para-Virtualization .......................................................10 Figure 4. Modeling alternatives in relation to model...the conceptual difference between full virtualization and para-virtualization. Figure 3. Full Virtualization vs . Para-Virtualization 2. XEN...Besides Microsoft’s own client implementations, dubbed “Remote Desktop Con- nection Client” for Windows® and Apple ® operating systems, various open

Evaluating an immersive virtual environment prototyping and simulation system

NASA Astrophysics Data System (ADS)

Nemire, Kenneth

1997-05-01

An immersive virtual environment (IVE) modeling and simulation tool is being developed for designing advanced weapon and training systems. One unique feature of the tool is that the design, and not just visualization of the design is accomplished with the IVE tool. Acceptance of IVE tools requires comparisons with current commercial applications. In this pilot study, expert users of a popular desktop 3D graphics application performed identical modeling and simulation tasks using both the desktop and IVE applications. The IVE tool consisted of a head-mounted display, 3D spatialized sound, spatial trackers on head and hands, instrumented gloves, and a simulated speech recognition system. The results are preliminary because performance from only four users has been examined. When using the IVE system, users completed the tasks to criteria in less time than when using the desktop application. Subjective ratings of the visual displays in each system were similar. Ratings for the desktop controls were higher than for the IVE controls. Ratings of immersion and user enjoyment were higher for the IVE than for the desktop application. These results are particular remarkable because participants had used the desktop application regularly for three to five years and the prototype IVE tool for only three to six hours.

Campus Computing 1993. The USC National Survey of Desktop Computing in Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.; Eastman, Skip

A national survey of desktop computing in higher education was conducted in spring and summer 1993 at over 2500 institutions. Data were responses from public and private research universities, public and private four-year colleges and community colleges. Respondents (N=1011) were individuals specifically responsible for the operation and future…

Campus Computing 1991. The EDUCOM-USC Survey of Desktop Computing in Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.; Eastman, Skip

A national survey of desktop computing in higher education was conducted in 1991 of 2500 institutions. Data were responses from public and private research universities, public and private four-year colleges, and community colleges. Respondents (N=1099) were individuals specifically responsible for the operation and future direction of academic…

Seat Interfaces for Aircrew Performance and Safety

DTIC Science & Technology

2010-01-01

Quantum -II Desktop System consists of a keyboard and hardware accessories (electrodes, cables, etc.), and interfaces with a desktop computer via software...segment. Resistance and reactance data was collected to estimate blood volume changes. The Quantum -II Desktop system collected continuous data of...Approved for public release; distribution unlimited. 88 ABW Cleared 03/13/2015; 88ABW-2015-1053. mockup also included a laptop computer , a

Desktop Publishing for Counselors.

ERIC Educational Resources Information Center

Lucking, Robert; Mitchum, Nancy

1990-01-01

Discusses the fundamentals of desktop publishing for counselors, including hardware and software systems and peripherals. Notes by using desktop publishing, counselors can produce their own high-quality documents without the expense of commercial printers. Concludes computers present a way of streamlining the communications of a counseling…

Another (Yawn) Revolution.

ERIC Educational Resources Information Center

McDonald, William

1987-01-01

Some of the limitations of desktop publishing are identified including: desktop systems cannot match the finished quality of typeset copy and traditionally prepared graphics; nonpublications office desktop publishing would require more time, and publishing will not be easier; hidden costs; and high quality depends on trained people. (MLW)

Towards the Ubiquitous Deployment of DNSSEC

DTIC Science & Technology

2016-01-01

with other deployment partners around the world, there is now a significant and growing number of TLDs that have been signed, and a number of...as Google Earth, the Blackberry 10 operating system, and the entire set of K Desktop Environment (KDE) windowing system applications are based on...differentiate between transient errors and legitimate DNS spoofing attacks is likely going to be very important as deployment grows . The importance of

Estimating Prediction Uncertainty from Geographical Information System Raster Processing: A User's Manual for the Raster Error Propagation Tool (REPTool)

USGS Publications Warehouse

Gurdak, Jason J.; Qi, Sharon L.; Geisler, Michael L.

2009-01-01

The U.S. Geological Survey Raster Error Propagation Tool (REPTool) is a custom tool for use with the Environmental System Research Institute (ESRI) ArcGIS Desktop application to estimate error propagation and prediction uncertainty in raster processing operations and geospatial modeling. REPTool is designed to introduce concepts of error and uncertainty in geospatial data and modeling and provide users of ArcGIS Desktop a geoprocessing tool and methodology to consider how error affects geospatial model output. Similar to other geoprocessing tools available in ArcGIS Desktop, REPTool can be run from a dialog window, from the ArcMap command line, or from a Python script. REPTool consists of public-domain, Python-based packages that implement Latin Hypercube Sampling within a probabilistic framework to track error propagation in geospatial models and quantitatively estimate the uncertainty of the model output. Users may specify error for each input raster or model coefficient represented in the geospatial model. The error for the input rasters may be specified as either spatially invariant or spatially variable across the spatial domain. Users may specify model output as a distribution of uncertainty for each raster cell. REPTool uses the Relative Variance Contribution method to quantify the relative error contribution from the two primary components in the geospatial model - errors in the model input data and coefficients of the model variables. REPTool is appropriate for many types of geospatial processing operations, modeling applications, and related research questions, including applications that consider spatially invariant or spatially variable error in geospatial data.

Device-independent color scanning

NASA Astrophysics Data System (ADS)

Burger, Rudolph E.

1993-08-01

Color calibration technology is being incorporated into both Apple and Microsoft's operating systems. These color savvy operating systems will produce a market pull towards 'smart color' scanners and printers which, in turn, will lead towards a distributed architecture for color management systems (CMS). Today's desktop scanners produce red-green-blue color signals that do not accurately describe the color of the object being scanned. Future scanners will be self-calibrating and communicate their own 'device profile' to the operating system based CMS. This paper describes some of the key technologies required for this next generation of smart color scanners. Topics covered include a comparison of colorimetric and conventional scanning technologies, and the impact of metamerism, dye fluorescence and chromatic adaptation on device independent color scanning.

IMGui-A Desktop GUI Application for Isolation with Migration Analyses.

PubMed

Knoblauch, Jared; Sethuraman, Arun; Hey, Jody

2017-02-01

The Isolation with Migration (IM) programs (e.g., IMa2) have been utilized extensively by evolutionary biologists for model-based inference of demographic parameters including effective population sizes, migration rates, and divergence times. Here, we describe a graphical user interface for the latest IM program. IMGui provides a comprehensive set of tools for performing demographic analyses, tracking progress of runs, and visualizing results. Developed using node. js and the Electron framework, IMGui is an application that runs on any desktop operating system, and is available for download at https://github.com/jaredgk/IMgui-electron-packages. © The Author 2016. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Soft x-ray imaging with incoherent sources

NASA Astrophysics Data System (ADS)

Wachulak, P.; Torrisi, A.; Ayele, M.; Bartnik, A.; Czwartos, J.; Wegrzyński, Ł.; Fok, T.; Parkman, T.; Vondrová, Š.; Turnová, J.; Odstrcil, M.; Fiedorowicz, H.

2017-05-01

In this work we present experimental, compact desk-top SXR microscope, the EUV microscope which is at this stage a technology demonstrator, and finally, the SXR contact microscope. The systems are based on laser-plasma EUV and SXR sources, employing a double stream gas puff target. The EUV and SXR full field microscopes, operating at 13.8 nm and 2.88 nm wavelengths, respectively, are capable of imaging nanostructures with a sub-50 nm spatial resolution with relatively short (seconds) exposure times. The SXR contact microscope operates in the "water-window" spectral range, to produce an imprint of the internal structure of the sample in a thin layer of SXR light sensitive photoresist. Applications of such desk-top EUV and SXR microscopes for studies of variety of different samples - test objects for resolution assessment and other objects such as carbon membranes, DNA plasmid samples, organic and inorganic thin layers, diatoms, algae and carcinoma cells, are also presented. Details about the sources, the microscopes as well as the imaging results for various objects will be presented and discussed. The development of such compact imaging systems may be important to the new research related to biological, material science and nanotechnology applications.

A Virtual Mission Operations Center: Collaborative Environment

NASA Technical Reports Server (NTRS)

Medina, Barbara; Bussman, Marie; Obenschain, Arthur F. (Technical Monitor)

2002-01-01

The Virtual Mission Operations Center - Collaborative Environment (VMOC-CE) intent is to have a central access point for all the resources used in a collaborative mission operations environment to assist mission operators in communicating on-site and off-site in the investigation and resolution of anomalies. It is a framework that as a minimum incorporates online chat, realtime file sharing and remote application sharing components in one central location. The use of a collaborative environment in mission operations opens up the possibilities for a central framework for other project members to access and interact with mission operations staff remotely. The goal of the Virtual Mission Operations Center (VMOC) Project is to identify, develop, and infuse technology to enable mission control by on-call personnel in geographically dispersed locations. In order to achieve this goal, the following capabilities are needed: Autonomous mission control systems Automated systems to contact on-call personnel Synthesis and presentation of mission control status and history information Desktop tools for data and situation analysis Secure mechanism for remote collaboration commanding Collaborative environment for remote cooperative work The VMOC-CE is a collaborative environment that facilitates remote cooperative work. It is an application instance of the Virtual System Design Environment (VSDE), developed by NASA Goddard Space Flight Center's (GSFC) Systems Engineering Services & Advanced Concepts (SESAC) Branch. The VSDE is a web-based portal that includes a knowledge repository and collaborative environment to serve science and engineering teams in product development. It is a "one stop shop" for product design, providing users real-time access to product development data, engineering and management tools, and relevant design specifications and resources through the Internet. The initial focus of the VSDE has been to serve teams working in the early portion of the system/product lifecycle - concept development, proposal preparation, and formulation. The VMOC-CE expands the application of the VSDE into the operations portion of the system lifecycle. It will enable meaningful and real-time collaboration regardless of the geographical distribution of project team members. Team members will be able to interact in satellite operations, specifically for resolving anomalies, through access to a desktop computer and the Internet. Mission Operations Management will be able to participate and monitor up to the minute status of anomalies or other mission operations issues. In this paper we present the VMOC-CE project, system capabilities, and technologies.

Virtual network computing: cross-platform remote display and collaboration software.

PubMed

Konerding, D E

1999-04-01

VNC (Virtual Network Computing) is a computer program written to address the problem of cross-platform remote desktop/application display. VNC uses a client/server model in which an image of the desktop of the server is transmitted to the client and displayed. The client collects mouse and keyboard input from the user and transmits them back to the server. The VNC client and server can run on Windows 95/98/NT, MacOS, and Unix (including Linux) operating systems. VNC is multi-user on Unix machines (any number of servers can be run are unrelated to the primary display of the computer), while it is effectively single-user on Macintosh and Windows machines (only one server can be run, displaying the contents of the primary display of the server). The VNC servers can be configured to allow more than one client to connect at one time, effectively allowing collaboration through the shared desktop. I describe the function of VNC, provide details of installation, describe how it achieves its goal, and evaluate the use of VNC for molecular modelling. VNC is an extremely useful tool for collaboration, instruction, software development, and debugging of graphical programs with remote users.

A Desktop Virtual Reality Earth Motion System in Astronomy Education

ERIC Educational Resources Information Center

Chen, Chih Hung; Yang, Jie Chi; Shen, Sarah; Jeng, Ming Chang

2007-01-01

In this study, a desktop virtual reality earth motion system (DVREMS) is designed and developed to be applied in the classroom. The system is implemented to assist elementary school students to clarify earth motion concepts using virtual reality principles. A study was conducted to observe the influences of the proposed system in learning.…

Tactical Communications Training Environment for Unmanned Aircraft System Operators

DTIC Science & Technology

2016-12-15

communication and teamwork skills. The Night Vision Tactical Trainer - Shadow (NVTT-Shadow) was developed as a game -based desktop solution to train...advanced individual training Soldiers and UAS course instructors. The usability testing demonstrated the feasibility of interactive gaming applied to MUM...T tactical communications. Ratings and comments from both students and instructors validated the need as well as mission context, game content, and

Geographic Freedom

NASA Technical Reports Server (NTRS)

2000-01-01

Kennedy Space Center's need to conduct real-time monitoring of Space Shuttle operations led to the development of Netlander Inc.'s JTouch system. The technology behind JTouch allows engineers to view Space Shuttle and ground support data from any desktop computer using a web browser. Companies can make use of JTouch to better monitor locations scattered around the world, increasing decision-making speed and reducing travel costs for site visits.

A New Definition for Ground Control

NASA Technical Reports Server (NTRS)

2002-01-01

LandForm(R) VisualFlight(R) blends the power of a geographic information system with the speed of a flight simulator to transform a user's desktop computer into a "virtual cockpit." The software product, which is fully compatible with all Microsoft(R) Windows(R) operating systems, provides distributed, real-time three-dimensional flight visualization over a host of networks. From a desktop, a user can immediately obtain a cockpit view, a chase-plane view, or an airborne tracker view. A customizable display also allows the user to overlay various flight parameters, including latitude, longitude, altitude, pitch, roll, and heading information. Rapid Imaging Software sought assistance from NASA, and the VisualFlight technology came to fruition under a Phase II SBIR contract with Johnson Space Center in 1998. Three years later, on December 13, 2001, Ken Ham successfully flew NASA's X-38 spacecraft from a remote, ground-based cockpit using LandForm VisualFlight as part of his primary situation awareness display in a flight test at Edwards Air Force Base, California.

An Investigation of Run-Time Operations in a Heterogeneous Desktop Grid Environment: The Texas Tech University Desktop Grid Case Study

ERIC Educational Resources Information Center

Perez, Jerry F.

2013-01-01

The goal of the dissertation study was to evaluate the existing DG scheduling algorithm. The evaluation was developed through previously explored simulated analyses of DGs performed by researchers in the field of DG scheduling optimization and to improve the current RT framework of the DG at TTU. The author analyzed the RT of an actual DG, thereby…

40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...

40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...

40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...

40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...

40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...

Desktop Manufacturing Technologies.

ERIC Educational Resources Information Center

Snyder, Mark

1991-01-01

Desktop manufacturing is the use of data from a computer-assisted design system to construct actual models of an object. Emerging processes are stereolithography, laser sintering, ballistic particle manufacturing, laminated object manufacturing, and photochemical machining. (SK)

Veterans Affairs Information Technology: Management Attention Needed to Improve Critical System Modernizations, Consolidate Data Centers, and Retire Legacy Systems

DTIC Science & Technology

2017-02-07

department operates approximately 240 information systems, manages approximately 314,000 desktop computers and 30,000 laptops , and administers nearly...department a 6 percent closure rate through fiscal year 2015 that ranked 19th of the 24 agencies in GAO’s study . Also, VA’s reported $19.1 million in cost...David A. Powner at (202) 512-9286 or pownerd@gao.gov. Why GAO Did This Study The use of IT is crucial to helping VA effectively serve the nation’s

Desktop aligner for fabrication of multilayer microfluidic devices.

PubMed

Li, Xiang; Yu, Zeta Tak For; Geraldo, Dalton; Weng, Shinuo; Alve, Nitesh; Dun, Wu; Kini, Akshay; Patel, Karan; Shu, Roberto; Zhang, Feng; Li, Gang; Jin, Qinghui; Fu, Jianping

2015-07-01

Multilayer assembly is a commonly used technique to construct multilayer polydimethylsiloxane (PDMS)-based microfluidic devices with complex 3D architecture and connectivity for large-scale microfluidic integration. Accurate alignment of structure features on different PDMS layers before their permanent bonding is critical in determining the yield and quality of assembled multilayer microfluidic devices. Herein, we report a custom-built desktop aligner capable of both local and global alignments of PDMS layers covering a broad size range. Two digital microscopes were incorporated into the aligner design to allow accurate global alignment of PDMS structures up to 4 in. in diameter. Both local and global alignment accuracies of the desktop aligner were determined to be about 20 μm cm(-1). To demonstrate its utility for fabrication of integrated multilayer PDMS microfluidic devices, we applied the desktop aligner to achieve accurate alignment of different functional PDMS layers in multilayer microfluidics including an organs-on-chips device as well as a microfluidic device integrated with vertical passages connecting channels located in different PDMS layers. Owing to its convenient operation, high accuracy, low cost, light weight, and portability, the desktop aligner is useful for microfluidic researchers to achieve rapid and accurate alignment for generating multilayer PDMS microfluidic devices.

Desktop aligner for fabrication of multilayer microfluidic devices

PubMed Central

Li, Xiang; Yu, Zeta Tak For; Geraldo, Dalton; Weng, Shinuo; Alve, Nitesh; Dun, Wu; Kini, Akshay; Patel, Karan; Shu, Roberto; Zhang, Feng; Li, Gang; Jin, Qinghui; Fu, Jianping

2015-01-01

Multilayer assembly is a commonly used technique to construct multilayer polydimethylsiloxane (PDMS)-based microfluidic devices with complex 3D architecture and connectivity for large-scale microfluidic integration. Accurate alignment of structure features on different PDMS layers before their permanent bonding is critical in determining the yield and quality of assembled multilayer microfluidic devices. Herein, we report a custom-built desktop aligner capable of both local and global alignments of PDMS layers covering a broad size range. Two digital microscopes were incorporated into the aligner design to allow accurate global alignment of PDMS structures up to 4 in. in diameter. Both local and global alignment accuracies of the desktop aligner were determined to be about 20 μm cm−1. To demonstrate its utility for fabrication of integrated multilayer PDMS microfluidic devices, we applied the desktop aligner to achieve accurate alignment of different functional PDMS layers in multilayer microfluidics including an organs-on-chips device as well as a microfluidic device integrated with vertical passages connecting channels located in different PDMS layers. Owing to its convenient operation, high accuracy, low cost, light weight, and portability, the desktop aligner is useful for microfluidic researchers to achieve rapid and accurate alignment for generating multilayer PDMS microfluidic devices. PMID:26233409

Desktop Publishing in Libraries.

ERIC Educational Resources Information Center

Cisler, Steve

1987-01-01

Describes the components, costs, and capabilities of several desktop publishing systems, and examines their possible impact on work patterns within organizations. The text and graphics of the article were created using various microcomputer software packages. (CLB)

Office Computer Software: A Comprehensive Review of Software Programs.

ERIC Educational Resources Information Center

Secretary, 1992

1992-01-01

Describes types of software including system software, application software, spreadsheets, accounting software, graphics packages, desktop publishing software, database, desktop and personal information management software, project and records management software, groupware, and shareware. (JOW)

Open Source Next Generation Visualization Software for Interplanetary Missions

NASA Technical Reports Server (NTRS)

Trimble, Jay; Rinker, George

2016-01-01

Mission control is evolving quickly, driven by the requirements of new missions, and enabled by modern computing capabilities. Distributed operations, access to data anywhere, data visualization for spacecraft analysis that spans multiple data sources, flexible reconfiguration to support multiple missions, and operator use cases, are driving the need for new capabilities. NASA's Advanced Multi-Mission Operations System (AMMOS), Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) are collaborating to build a new generation of mission operations software for visualization, to enable mission control anywhere, on the desktop, tablet and phone. The software is built on an open source platform that is open for contributions (http://nasa.github.io/openmct).

Compact and low-cost THz QTDS system.

PubMed

Probst, Thorsten; Rehn, Arno; Koch, Martin

2015-08-24

We present a terahertz quasi time domain spectroscopy (QTDS) system setup which is improved regarding cost and compactness. The diode laser is mounted directly onto the optical delay line, making the optical setup more compact. The system is operated using a Raspberry Pi and an additional sound card. This combination replaces the desktop/laptop computer, the lock-in-amplifier, the stage controller and the signal generator. We examined not only a commercially available stepper motor driven delay line, but also the repurposed internal mechanics from a DVD drive. We characterize the performance of the new system concept.

Desktop chaotic systems: Intuition and visualization

NASA Technical Reports Server (NTRS)

Bright, Michelle M.; Melcher, Kevin J.; Qammar, Helen K.; Hartley, Tom T.

1993-01-01

This paper presents a dynamic study of the Wildwood Pendulum, a commercially available desktop system which exhibits a strange attractor. The purpose of studying this chaotic pendulum is twofold: to gain insight in the paradigmatic approach of modeling, simulating, and determining chaos in nonlinear systems; and to provide a desktop model of chaos as a visual tool. For this study, the nonlinear behavior of this chaotic pendulum is modeled, a computer simulation is performed, and an experimental performance is measured. An assessment of the pendulum in the phase plane shows the strange attractor. Through the use of a box-assisted correlation dimension methodology, the attractor dimension is determined for both the model and the experimental pendulum systems. Correlation dimension results indicate that the pendulum and the model are chaotic and their fractal dimensions are similar.

Desktop Genetics.

PubMed

Hough, Soren H; Ajetunmobi, Ayokunmi; Brody, Leigh; Humphryes-Kirilov, Neil; Perello, Edward

2016-11-01

Desktop Genetics is a bioinformatics company building a gene-editing platform for personalized medicine. The company works with scientists around the world to design and execute state-of-the-art clustered regularly interspaced short palindromic repeats (CRISPR) experiments. Desktop Genetics feeds the lessons learned about experimental intent, single-guide RNA design and data from international genomics projects into a novel CRISPR artificial intelligence system. We believe that machine learning techniques can transform this information into a cognitive therapeutic development tool that will revolutionize medicine.

NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Lane, Robert; Hart, Susan V.

1995-01-01

The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

Implementing desktop image access of GI images

NASA Astrophysics Data System (ADS)

Grevera, George J.; Feingold, Eric R.; Horii, Steven C.; Laufer, Igor

1996-05-01

In this paper we present a specific example of the current state-of-the-art in desktop image access in the GI section of the Department of Radiology at the Hospital of the University of Pennsylvania. We describe a system which allows physicians to view and manipulate images from a Philips digital fluoroscopy system at the workstations in their offices. Typically they manipulate and view these images on their desktop Macs and then submit the results for slide making or save the images in digital teaching files. In addition to a discussion of the current state-of-the-art here at HUP, we also discuss some future directions that we are pursuing.

Using Avizo Software on the Peregrine System | High-Performance Computing |

Science.gov Websites

be run remotely from the Peregrine visualization node. First, launch a TurboVNC remote desktop. Then from a terminal in that remote desktop: % module load avizo % vglrun avizo Running Locally Avizo can

Unix Survival Guide.

PubMed

Stein, Lincoln D

2015-09-03

Most bioinformatics software has been designed to run on Linux and other Unix-like systems. Unix is different from most desktop operating systems because it makes extensive use of a text-only command-line interface. It can be a challenge to become familiar with the command line, but once a person becomes used to it, there are significant rewards, such as the ability to string a commonly used series of commands together with a script. This appendix will get you started with the command line and other Unix essentials. Copyright © 2015 John Wiley & Sons, Inc.

Real-time control system for adaptive resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flath, L; An, J; Brase, J

2000-07-24

Sustained operation of high average power solid-state lasers currently requires an adaptive resonator to produce the optimal beam quality. We describe the architecture of a real-time adaptive control system for correcting intra-cavity aberrations in a heat capacity laser. Image data collected from a wavefront sensor are processed and used to control phase with a high-spatial-resolution deformable mirror. Our controller takes advantage of recent developments in low-cost, high-performance processor technology. A desktop-based computational engine and object-oriented software architecture replaces the high-cost rack-mount embedded computers of previous systems.

Telescience Resource Kit (TReK)

NASA Technical Reports Server (NTRS)

Lippincott, Jeff

2015-01-01

Telescience Resource Kit (TReK) is one of the Huntsville Operations Support Center (HOSC) remote operations solutions. It can be used to monitor and control International Space Station (ISS) payloads from anywhere in the world. It is comprised of a suite of software applications and libraries that provide generic data system capabilities and access to HOSC services. The TReK Software has been operational since 2000. A new cross-platform version of TReK is under development. The new software is being released in phases during the 2014-2016 timeframe. The TReK Release 3.x series of software is the original TReK software that has been operational since 2000. This software runs on Windows. It contains capabilities to support traditional telemetry and commanding using CCSDS (Consultative Committee for Space Data Systems) packets. The TReK Release 4.x series of software is the new cross platform software. It runs on Windows and Linux. The new TReK software will support communication using standard IP protocols and traditional telemetry and commanding. All the software listed above is compatible and can be installed and run together on Windows. The new TReK software contains a suite of software that can be used by payload developers on the ground and onboard (TReK Toolkit). TReK Toolkit is a suite of lightweight libraries and utility applications for use onboard and on the ground. TReK Desktop is the full suite of TReK software -most useful on the ground. When TReK Desktop is released, the TReK installation program will provide the option to choose just the TReK Toolkit portion of the software or the full TReK Desktop suite. The ISS program is providing the TReK Toolkit software as a generic flight software capability offered as a standard service to payloads. TReK Software Verification was conducted during the April/May 2015 timeframe. Payload teams using the TReK software onboard can reference the TReK software verification. TReK will be demonstrated on-orbit running on an ISS provided T61p laptop. Target Timeframe: September 2015 -2016. The on-orbit demonstration will collect benchmark metrics, and will be used in the future to provide live demonstrations during ISS Payload Conferences. Benchmark metrics and demonstrations will address the protocols described in SSP 52050-0047 Ku Forward section 3.3.7. (Associated term: CCSDS File Delivery Protocol (CFDP)).

Prototype Implementation of Web and Desktop Applications for ALMA Science Verification Data and the Lessons Learned

NASA Astrophysics Data System (ADS)

Eguchi, S.; Kawasaki, W.; Shirasaki, Y.; Komiya, Y.; Kosugi, G.; Ohishi, M.; Mizumoto, Y.

2013-10-01

ALMA is estimated to generate TB scale data during only one observation; astronomers need to identify which part of the data they are really interested in. We have been developing new GUI software for this purpose utilizing the VO interface: ALMA Web Quick Look System (ALMAWebQL) and ALMA Desktop Application (Vissage). The former is written in JavaScript and HTML5 generated from Java code by the Google Web Toolkit, and the latter is in pure Java. An essential point of our approach is how to reduce network traffic: we prepare, in advance, “compressed” FITS files of 2x2x1 (horizontal, vertical, and spectral directions, respectively) binning, 2 x 2 x 2 binning, 4 x 4 x 2 binning data, and so on. These files are hidden from users, and Web QL automatically chooses the proper one for each user operation. Through this work, we find that network traffic in our system is still a bottleneck towards TB scale data distribution. Hence we have to develop alternative data containers for much faster data processing. In this paper, we introduce our data analysis systems, and describe what we learned through the development.

Real Time Integration of Field Data Into a GIS Platform for the Management of Hydrological Emergencies

NASA Astrophysics Data System (ADS)

Mangiameli, M.; Mussumeci, G.

2013-01-01

A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS). The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

Randomized Trial of Desktop Humidifier for Dry Eye Relief in Computer Users.

PubMed

Wang, Michael T M; Chan, Evon; Ea, Linda; Kam, Clifford; Lu, Yvonne; Misra, Stuti L; Craig, Jennifer P

2017-11-01

Dry eye is a frequently reported problem among computer users. Low relative humidity environments are recognized to exacerbate signs and symptoms of dry eye, yet are common in offices of computer operators. Desktop USB-powered humidifiers are available commercially, but their efficacy for dry eye relief has not been established. This study aims to evaluate the potential for a desktop USB-powered humidifier to improve tear-film parameters, ocular surface characteristics, and subjective comfort of computer users. Forty-four computer users were enrolled in a prospective, masked, randomized crossover study. On separate days, participants were randomized to 1 hour of continuous computer use, with and without exposure to a desktop humidifier. Lipid-layer grade, noninvasive tear-film breakup time, and tear meniscus height were measured before and after computer use. Following the 1-hour period, participants reported whether ocular comfort was greater, equal, or lesser than that at baseline. The desktop humidifier effected a relative difference in humidity between the two environments of +5.4 ± 5.0% (P < .001). Participants demonstrated no significant differences in lipid-layer grade and tear meniscus height between the two environments (all P > .05). However, a relative increase in the median noninvasive tear-film breakup time of +4.0 seconds was observed in the humidified environment (P < .001), which was associated with a higher proportion of subjects reporting greater comfort relative to baseline (36% vs. 5%, P < .001). Even with a modest increase in relative humidity locally, the desktop humidifier shows potential to improve tear-film stability and subjective comfort during computer use.Trial registration no: ACTRN12617000326392.

Desktop Virtualization: Applications and Considerations

ERIC Educational Resources Information Center

Hodgman, Matthew R.

2013-01-01

As educational technology continues to rapidly become a vital part of a school district's infrastructure, desktop virtualization promises to provide cost-effective and education-enhancing solutions to school-based computer technology problems in school systems locally and abroad. This article outlines the history of and basic concepts behind…

Desktop Publishing in Education.

ERIC Educational Resources Information Center

Hall, Wendy; Layman, J.

1989-01-01

Discusses the state of desktop publishing (DTP) in education today and describes the weaknesses of the systems available for use in the classroom. Highlights include document design and layout; text composition; graphics; word processing capabilities; a comparison of commercial and educational DTP packages; and skills required for DTP. (four…

Autonomous Aerobraking: Thermal Analysis and Response Surface Development

NASA Technical Reports Server (NTRS)

Dec, John A.; Thornblom, Mark N.

2011-01-01

A high-fidelity thermal model of the Mars Reconnaissance Orbiter was developed for use in an autonomous aerobraking simulation study. Response surface equations were derived from the high-fidelity thermal model and integrated into the autonomous aerobraking simulation software. The high-fidelity thermal model was developed using the Thermal Desktop software and used in all phases of the analysis. The use of Thermal Desktop exclusively, represented a change from previously developed aerobraking thermal analysis methodologies. Comparisons were made between the Thermal Desktop solutions and those developed for the previous aerobraking thermal analyses performed on the Mars Reconnaissance Orbiter during aerobraking operations. A variable sensitivity screening study was performed to reduce the number of variables carried in the response surface equations. Thermal analysis and response surface equation development were performed for autonomous aerobraking missions at Mars and Venus.

Coal-seismic, desktop computer programs in BASIC; Part 7, Display and compute shear-pair seismograms

USGS Publications Warehouse

Hasbrouck, W.P.

1983-01-01

Processing of geophysical data taken with the U.S. Geological Survey's coal-seismic system is done with a desk-top, stand-alone computer. Programs for this computer are written in the extended BASIC language utilized by the Tektronix 4051 Graphic System. This report discusses and presents five computer pro grams used to display and compute shear-pair seismograms.

Correlation between National Influenza Surveillance Data and Search Queries from Mobile Devices and Desktops in South Korea

PubMed Central

Seo, Dong-Woo; Sohn, Chang Hwan; Kim, Sung-Hoon; Ryoo, Seung Mok; Lee, Yoon-Seon; Lee, Jae Ho; Kim, Won Young; Lim, Kyoung Soo

2016-01-01

Background Digital surveillance using internet search queries can improve both the sensitivity and timeliness of the detection of a health event, such as an influenza outbreak. While it has recently been estimated that the mobile search volume surpasses the desktop search volume and mobile search patterns differ from desktop search patterns, the previous digital surveillance systems did not distinguish mobile and desktop search queries. The purpose of this study was to compare the performance of mobile and desktop search queries in terms of digital influenza surveillance. Methods and Results The study period was from September 6, 2010 through August 30, 2014, which consisted of four epidemiological years. Influenza-like illness (ILI) and virologic surveillance data from the Korea Centers for Disease Control and Prevention were used. A total of 210 combined queries from our previous survey work were used for this study. Mobile and desktop weekly search data were extracted from Naver, which is the largest search engine in Korea. Spearman’s correlation analysis was used to examine the correlation of the mobile and desktop data with ILI and virologic data in Korea. We also performed lag correlation analysis. We observed that the influenza surveillance performance of mobile search queries matched or exceeded that of desktop search queries over time. The mean correlation coefficients of mobile search queries and the number of queries with an r-value of ≥ 0.7 equaled or became greater than those of desktop searches over the four epidemiological years. A lag correlation analysis of up to two weeks showed similar trends. Conclusion Our study shows that mobile search queries for influenza surveillance have equaled or even become greater than desktop search queries over time. In the future development of influenza surveillance using search queries, the recognition of changing trend of mobile search data could be necessary. PMID:27391028

Correlation between National Influenza Surveillance Data and Search Queries from Mobile Devices and Desktops in South Korea.

PubMed

Shin, Soo-Yong; Kim, Taerim; Seo, Dong-Woo; Sohn, Chang Hwan; Kim, Sung-Hoon; Ryoo, Seung Mok; Lee, Yoon-Seon; Lee, Jae Ho; Kim, Won Young; Lim, Kyoung Soo

2016-01-01

Digital surveillance using internet search queries can improve both the sensitivity and timeliness of the detection of a health event, such as an influenza outbreak. While it has recently been estimated that the mobile search volume surpasses the desktop search volume and mobile search patterns differ from desktop search patterns, the previous digital surveillance systems did not distinguish mobile and desktop search queries. The purpose of this study was to compare the performance of mobile and desktop search queries in terms of digital influenza surveillance. The study period was from September 6, 2010 through August 30, 2014, which consisted of four epidemiological years. Influenza-like illness (ILI) and virologic surveillance data from the Korea Centers for Disease Control and Prevention were used. A total of 210 combined queries from our previous survey work were used for this study. Mobile and desktop weekly search data were extracted from Naver, which is the largest search engine in Korea. Spearman's correlation analysis was used to examine the correlation of the mobile and desktop data with ILI and virologic data in Korea. We also performed lag correlation analysis. We observed that the influenza surveillance performance of mobile search queries matched or exceeded that of desktop search queries over time. The mean correlation coefficients of mobile search queries and the number of queries with an r-value of ≥ 0.7 equaled or became greater than those of desktop searches over the four epidemiological years. A lag correlation analysis of up to two weeks showed similar trends. Our study shows that mobile search queries for influenza surveillance have equaled or even become greater than desktop search queries over time. In the future development of influenza surveillance using search queries, the recognition of changing trend of mobile search data could be necessary.

Desk-top publishing using IBM-compatible computers.

PubMed

Grencis, P W

1991-01-01

This paper sets out to describe one Medical Illustration Departments' experience of the introduction of computers for desk-top publishing. In this particular case, after careful consideration of all the options open, an IBM-compatible system was installed rather than the often popular choice of an Apple Macintosh.

An Inverse Modeling Plugin for HydroDesktop using the Method of Anchored Distributions (MAD)

NASA Astrophysics Data System (ADS)

Ames, D. P.; Osorio, C.; Over, M. W.; Rubin, Y.

2011-12-01

The CUAHSI Hydrologic Information System (HIS) software stack is based on an open and extensible architecture that facilitates the addition of new functions and capabilities at both the server side (using HydroServer) and the client side (using HydroDesktop). The HydroDesktop client plugin architecture is used here to expose a new scripting based plugin that makes use of the R statistics software as a means for conducting inverse modeling using the Method of Anchored Distributions (MAD). MAD is a Bayesian inversion technique for conditioning computational model parameters on relevant field observations yielding probabilistic distributions of the model parameters, related to the spatial random variable of interest, by assimilating multi-type and multi-scale data. The implementation of a desktop software tool for using the MAD technique is expected to significantly lower the barrier to use of inverse modeling in education, research, and resource management. The HydroDesktop MAD plugin is being developed following a community-based, open-source approach that will help both its adoption and long term sustainability as a user tool. This presentation will briefly introduce MAD, HydroDesktop, and the MAD plugin and software development effort.

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments.

PubMed

Azimi, Parham; Zhao, Dan; Pouzet, Claire; Crain, Neil E; Stephens, Brent

2016-02-02

Previous research has shown that desktop 3D printers can emit large numbers of ultrafine particles (UFPs, particles less than 100 nm) and some hazardous volatile organic compounds (VOCs) during printing, although very few filament and 3D printer combinations have been tested to date. Here we quantify emissions of UFPs and speciated VOCs from five commercially available filament extrusion desktop 3D printers utilizing up to nine different filaments by controlled experiments in a test chamber. Median estimates of time-varying UFP emission rates ranged from ∼10(8) to ∼10(11) min(-1) across all tested combinations, varying primarily by filament material and, to a lesser extent, bed temperature. The individual VOCs emitted in the largest quantities included caprolactam from nylon-based and imitation wood and brick filaments (ranging from ∼2 to ∼180 μg/min), styrene from acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS) filaments (ranging from ∼10 to ∼110 μg/min), and lactide from polylactic acid (PLA) filaments (ranging from ∼4 to ∼5 μg/min). Results from a screening analysis of potential exposure to these products in a typical small office environment suggest caution should be used when operating many of the printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.

Exciting Normal Distribution

ERIC Educational Resources Information Center

Fuchs, Karl Josef; Simonovits, Reinhard; Thaller, Bernd

2008-01-01

This paper describes a high school project where the mathematics teaching and learning software M@th Desktop (MD) based on the Computer Algebra System Mathematica was used for symbolical and numerical calculations and for visualisation. The mathematics teaching and learning software M@th Desktop 2.0 (MD) contains the modules Basics including tools…

78 FR 12295 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... published notices of proposed additions to the Procurement List. After consideration of the material..., 508 Compliant, 12 Digit, Portable, Desktop, Battery Operated NPA: MidWest Enterprises for the Blind...

HydroDesktop: An Open Source GIS-Based Platform for Hydrologic Data Discovery, Visualization, and Analysis

NASA Astrophysics Data System (ADS)

Ames, D. P.; Kadlec, J.; Cao, Y.; Grover, D.; Horsburgh, J. S.; Whiteaker, T.; Goodall, J. L.; Valentine, D. W.

2010-12-01

A growing number of hydrologic information servers are being deployed by government agencies, university networks, and individual researchers using the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI) Hydrologic Information System (HIS). The CUAHSI HIS Project has developed a standard software stack, called HydroServer, for publishing hydrologic observations data. It includes the Observations Data Model (ODM) database and Water Data Service web services, which together enable publication of data on the Internet in a standard format called Water Markup Language (WaterML). Metadata describing available datasets hosted on these servers is compiled within a central metadata catalog called HIS Central at the San Diego Supercomputer Center and is searchable through a set of predefined web services based queries. Together, these servers and central catalog service comprise a federated HIS of a scale and comprehensiveness never previously available. This presentation will briefly review/introduce the CUAHSI HIS system with special focus on a new HIS software tool called "HydroDesktop" and the open source software development web portal, www.HydroDesktop.org, which supports community development and maintenance of the software. HydroDesktop is a client-side, desktop software application that acts as a search and discovery tool for exploring the distributed network of HydroServers, downloading specific data series, visualizing and summarizing data series and exporting these to formats needed for analysis by external software. HydroDesktop is based on the open source DotSpatial GIS developer toolkit which provides it with map-based data interaction and visualization, and a plug-in interface that can be used by third party developers and researchers to easily extend the software using Microsoft .NET programming languages. HydroDesktop plug-ins that are presently available or currently under development within the project and by third party collaborators include functions for data search and discovery, extensive graphing, data editing and export, HydroServer exploration, integration with the OpenMI workflow and modeling system, and an interface for data analysis through the R statistical package.

Operational Improvements From the In-Trail Procedure in the North Atlantic Organized Track System

NASA Technical Reports Server (NTRS)

Chartrand, Ryan C.; Bussink, Frank J. L.; Graff, Thomas J.; Murdoch, Jennifer L.; Jones, Kenneth M.

2008-01-01

This paper explains the computerized batch processing experiment examining the operational impacts of the introduction of Automatic Dependent Surveillance-Broadcast (ADS-B) equipment and the In-Trail Procedure (ITP) to the North Atlantic Organized Track System (NATOTS). This experiment was conducted using the Traffic Manager (TMX), a desktop simulation capable of simulating airspace environments and aircraft operations. ADS-B equipment can enable the use of new ground and airborne procedures, such as the ITP. The ITP is among the first of these new procedures, which will make use of improved situation awareness in the local surrounding airspace of ADS-B equipped aircraft to enable more efficient oceanic flight level changes. The data collected were analyzed with respect to multiple operationally relevant parameters including fuel burn, request approval rates, and the distribution of fuel savings. This experiment showed that through the use of ADS-B or ADS-B and the ITP that operational improvements and benefits could be achieved.

Operational Improvements From Using the In-Trail Procedure in the North Atlantic Organized Track System

NASA Technical Reports Server (NTRS)

Chartrand, Ryan C.; Bussink, Frank J.; Graff, Thomas J.; Jones, Kenneth M.

2009-01-01

This paper explains the computerized batch processing experiment examining the operational impacts of the introduction of Automatic Dependent Surveillance-Broadcast (ADS-B) equipment and the In-Trail Procedure (ITP) to the North Atlantic Organized Track System. This experiment was conducted using the Traffic Manager (TMX), a desktop simulation capable of simulating airspace environments and aircraft operations. ADS-B equipment can enable the use of new ground and airborne procedures, such as the ITP. ITP is among the first of these new procedures, which will make use of improved situation awareness in the local surrounding airspace of ADS-B equipped aircraft to enable more efficient oceanic flight level changes. The collected data were analyzed with respect to multiple operationally relevant parameters including fuel burn, request approval rates, and the distribution of fuel savings. This experiment showed that through the use of ADS-B or ADS-B and the ITP that operational improvements and benefits could be achieved.

Use of Signaling to Integrate Desktop Virtual Reality and Online Learning Management Systems

ERIC Educational Resources Information Center

Dodd, Bucky J.; Antonenko, Pavlo D.

2012-01-01

Desktop virtual reality is an emerging educational technology that offers many potential benefits for learners in online learning contexts; however, a limited body of research is available that connects current multimedia learning techniques with these new forms of media. Because most formal online learning is delivered using learning management…

Delivering an Alternative Medicine Resource to the User's Desktop via World Wide Web.

ERIC Educational Resources Information Center

Li, Jie; Wu, Gang; Marks, Ellen; Fan, Weiyu

1998-01-01

Discusses the design and implementation of a World Wide Web-based alternative medicine virtual resource. This homepage integrates regional, national, and international resources and delivers library services to the user's desktop. Goals, structure, and organizational schemes of the system are detailed, and design issues for building such a…

Versatile Desktop Experiment Module (DEMo) on Heat Transfer

ERIC Educational Resources Information Center

Minerick, Adrienne R.

2010-01-01

This paper outlines a new Desktop Experiment Module (DEMo) engineered for a chemical engineering junior-level Heat Transfer course. This new DEMo learning tool is versatile, fairly inexpensive, and portable such that it can be positioned on student desks throughout a classroom. The DEMo system can illustrate conduction of various materials,…

From Server to Desktop: Capital and Institutional Planning for Client/Server Technology.

ERIC Educational Resources Information Center

Mullig, Richard M.; Frey, Keith W.

1994-01-01

Beginning with a request for an enhanced system for decision/strategic planning support, the University of Chicago's biological sciences division has developed a range of administrative client/server tools, instituted a capital replacement plan for desktop technology, and created a planning and staffing approach enabling rapid introduction of new…

Smart Desktops for Teachers. ECS Issue Paper: Technology.

ERIC Educational Resources Information Center

Palaich, Robert M.; Good, Dixie Griffin; Stout, Connie; Vickery, Emily

This report presents the results of a study of how emerging technologies can help educators deliver standards-based education to K-12 students. The first section of the report provides background on the new technology offerings and defines smart desktop systems. The second section lists critical questions for decisionmakers related to general…

Coal-seismic, desktop computer programs in BASIC; Part 6, Develop rms velocity functions and apply mute and normal movement

USGS Publications Warehouse

Hasbrouck, W.P.

1983-01-01

Processing of data taken with the U.S. Geological Survey's coal-seismic system is done with a desktop, stand-alone computer. Programs for this computer are written in the extended BASIC language utilized by the Tektronix 4051 Graphic System. This report presents computer programs used to develop rms velocity functions and apply mute and normal moveout to a 12-trace seismogram.

Ablation Modeling of Ares-I Upper State Thermal Protection System Using Thermal Desktop

NASA Technical Reports Server (NTRS)

Sharp, John R.; Page, Arthur T.

2007-01-01

The thermal protection system (TPS) for the Ares-I Upper Stage will be based on Space Transportation System External Tank (ET) and Solid Rocket Booster (SRB) heritage materials. These TPS materials were qualified via hot gas testing that simulated ascent and re-entry aerothermodynamic convective heating environments. From this data, the recession rates due to ablation were characterized and used in thermal modeling for sizing the thickness required to maintain structural substrate temperatures. At Marshall Space Flight Center (MSFC), the in-house code ABL is currently used to predict TPS ablation and substrate temperatures as a FORTRAN application integrated within SINDA/G. This paper describes a comparison of the new ablation utility in Thermal Desktop and SINDA/FLUINT with the heritage ABL code and empirical test data which serves as the validation of the Thermal Desktop software for use on the design of the Ares-I Upper Stage project.

Low Cost Desktop Image Analysis Workstation With Enhanced Interactive User Interface

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Huang, H. K.

1989-05-01

A multimodality picture archiving and communication system (PACS) is in routine clinical use in the UCLA Radiology Department. Several types workstations are currently implemented for this PACS. Among them, the Apple Macintosh II personal computer was recently chosen to serve as a desktop workstation for display and analysis of radiological images. This personal computer was selected mainly because of its extremely friendly user-interface, its popularity among the academic and medical community and its low cost. In comparison to other microcomputer-based systems the Macintosh II offers the following advantages: the extreme standardization of its user interface, file system and networking, and the availability of a very large variety of commercial software packages. In the current configuration the Macintosh II operates as a stand-alone workstation where images are imported from a centralized PACS server through an Ethernet network using a standard TCP-IP protocol, and stored locally on magnetic disk. The use of high resolution screens (1024x768 pixels x 8bits) offer sufficient performance for image display and analysis. We focused our project on the design and implementation of a variety of image analysis algorithms ranging from automated structure and edge detection to sophisticated dynamic analysis of sequential images. Specific analysis programs were developed for ultrasound images, digitized angiograms, MRI and CT tomographic images and scintigraphic images.

Metallurgical Plant Optimization Through the use of Flowsheet Simulation Modelling

NASA Astrophysics Data System (ADS)

Kennedy, Mark William

Modern metallurgical plants typically have complex flowsheets and operate on a continuous basis. Real time interactions within such processes can be complex and the impacts of streams such as recycles on process efficiency and stability can be highly unexpected prior to actual operation. Current desktop computing power, combined with state-of-the-art flowsheet simulation software like Metsim, allow for thorough analysis of designs to explore the interaction between operating rate, heat and mass balances and in particular the potential negative impact of recycles. Using plant information systems, it is possible to combine real plant data with simple steady state models, using dynamic data exchange links to allow for near real time de-bottlenecking of operations. Accurate analytical results can also be combined with detailed unit operations models to allow for feed-forward model-based-control. This paper will explore some examples of the application of Metsim to real world engineering and plant operational issues.

Line-scan system for continuous hand authentication

NASA Astrophysics Data System (ADS)

Liu, Xiaofeng; Kong, Lingsheng; Diao, Zhihui; Jia, Ping

2017-03-01

An increasing number of heavy machinery and vehicles have come into service, giving rise to a significant concern over protecting these high-security systems from misuse. Conventionally, authentication performed merely at the initial login may not be sufficient for detecting intruders throughout the operating session. To address this critical security flaw, a line-scan continuous hand authentication system with the appearance of an operating rod is proposed. Given that the operating rod is occupied throughout the operating period, it can be a possible solution for unobtrusively recording the personal characteristics for continuous monitoring. The ergonomics in the physiological and psychological aspects are fully considered. Under the shape constraints, a highly integrated line-scan sensor, a controller unit, and a gear motor with encoder are utilized. This system is suitable for both the desktop and embedded platforms with a universal serial bus interface. The volume of the proposed system is smaller than 15% of current multispectral area-based camera systems. Based on experiments on a database with 4000 images from 200 volunteers, a competitive equal error rate of 0.1179% is achieved, which is far more accurate than the state-of-the-art continuous authentication systems using other modalities.

Temperature Control with Two Parallel Small Loop Heat Pipes for GLM Program

NASA Technical Reports Server (NTRS)

Khrustalev, Dmitry; Stouffer, Chuck; Ku, Jentung; Hamilton, Jon; Anderson, Mark

2014-01-01

The concept of temperature control of an electronic component using a single Loop Heat Pipe (LHP) is well established for Aerospace applications. Using two LHPs is often desirable for redundancy/reliability reasons or for increasing the overall heat source-sink thermal conductance. This effort elaborates on temperature controlling operation of a thermal system that includes two small ammonia LHPs thermally coupled together at the evaporator end as well as at the condenser end and operating "in parallel". A transient model of the LHP system was developed on the Thermal Desktop (TradeMark) platform to understand some fundamental details of such parallel operation of the two LHPs. Extensive thermal-vacuum testing was conducted with two thermally coupled LHPs operating simultaneously as well as with only one LHP operating at a time. This paper outlines the temperature control procedures for two LHPs operating simultaneously with widely varying sink temperatures. The test data obtained during the thermal-vacuum testing, with both LHPs running simultaneously in comparison with only one LHP operating at a time, are presented with detailed explanations.

Coal-seismic, desktop computer programs in BASIC; Part 5, Perform X-square T-square analysis and plot normal moveout lines on seismogram overlay

USGS Publications Warehouse

Hasbrouck, W.P.

1983-01-01

Processing of data taken with the U.S. Geological Survey's coal-seismic system is done with a desktop, stand-alone computer. Programs for this computer are written in the extended BASIC language used by the Tektronix 4051 Graphic System. This report presents computer programs to perform X-square/T-square analyses and to plot normal moveout lines on a seismogram overlay.

Using Desktop Publishing in an Editing Class--The Lessons Learned and Students' Assessments.

ERIC Educational Resources Information Center

Tharp, Marty; Zimmerman, Don

1992-01-01

Reports students' perceptions of learning desktop publishing (DTP) systems. Finds that (1) students learned the foundations of DTP in under 60 hours of hands-on experience; (2) the incremental introduction of DTP functions and practice sessions before assignments were the most effective teaching strategy; and (3) use of DTP encouraged nonartistic…

Desktop system for accounting, audit, and research in A&E.

PubMed Central

Taylor, C J; Brain, S G; Bull, F; Crosby, A C; Ferguson, D G

1997-01-01

The development of a database for audit, research, and accounting in accident and emergency (A&E) is described. The system uses a desktop computer, an optical scanner, sophisticated optical mark reader software, and workload management data. The system is highly flexible, easy to use, and at a cost of around 16,000 pounds affordable for larger departments wishing to move towards accounting. For smaller departments, it may be an alternative to full computerisation. Images Figure 1 Figure 2 Figure 3 Figure 5 Figure 6 PMID:9132200

Scalable computing for evolutionary genomics.

PubMed

Prins, Pjotr; Belhachemi, Dominique; Möller, Steffen; Smant, Geert

2012-01-01

Genomic data analysis in evolutionary biology is becoming so computationally intensive that analysis of multiple hypotheses and scenarios takes too long on a single desktop computer. In this chapter, we discuss techniques for scaling computations through parallelization of calculations, after giving a quick overview of advanced programming techniques. Unfortunately, parallel programming is difficult and requires special software design. The alternative, especially attractive for legacy software, is to introduce poor man's parallelization by running whole programs in parallel as separate processes, using job schedulers. Such pipelines are often deployed on bioinformatics computer clusters. Recent advances in PC virtualization have made it possible to run a full computer operating system, with all of its installed software, on top of another operating system, inside a "box," or virtual machine (VM). Such a VM can flexibly be deployed on multiple computers, in a local network, e.g., on existing desktop PCs, and even in the Cloud, to create a "virtual" computer cluster. Many bioinformatics applications in evolutionary biology can be run in parallel, running processes in one or more VMs. Here, we show how a ready-made bioinformatics VM image, named BioNode, effectively creates a computing cluster, and pipeline, in a few steps. This allows researchers to scale-up computations from their desktop, using available hardware, anytime it is required. BioNode is based on Debian Linux and can run on networked PCs and in the Cloud. Over 200 bioinformatics and statistical software packages, of interest to evolutionary biology, are included, such as PAML, Muscle, MAFFT, MrBayes, and BLAST. Most of these software packages are maintained through the Debian Med project. In addition, BioNode contains convenient configuration scripts for parallelizing bioinformatics software. Where Debian Med encourages packaging free and open source bioinformatics software through one central project, BioNode encourages creating free and open source VM images, for multiple targets, through one central project. BioNode can be deployed on Windows, OSX, Linux, and in the Cloud. Next to the downloadable BioNode images, we provide tutorials online, which empower bioinformaticians to install and run BioNode in different environments, as well as information for future initiatives, on creating and building such images.

The multi-attribute task battery for human operator workload and strategic behavior research

NASA Technical Reports Server (NTRS)

Comstock, J. Raymond, Jr.; Arnegard, Ruth J.

1992-01-01

The Multi-Attribute Task (MAT) Battery provides a benchmark set of tasks for use in a wide range of lab studies of operator performance and workload. The battery incorporates tasks analogous to activities that aircraft crewmembers perform in flight, while providing a high degree of experimenter control, performance data on each subtask, and freedom to use nonpilot test subjects. Features not found in existing computer based tasks include an auditory communication task (to simulate Air Traffic Control communication), a resource management task permitting many avenues or strategies of maintaining target performance, a scheduling window which gives the operator information about future task demands, and the option of manual or automated control of tasks. Performance data are generated for each subtask. In addition, the task battery may be paused and onscreen workload rating scales presented to the subject. The MAT Battery requires a desktop computer with color graphics. The communication task requires a serial link to a second desktop computer with a voice synthesizer or digitizer card.

SOSS User Guide

NASA Technical Reports Server (NTRS)

Zhu, Zhifan; Gridnev, Sergei; Windhorst, Robert D.

2015-01-01

This User Guide describes SOSS (Surface Operations Simulator and Scheduler) software build and graphic user interface. SOSS is a desktop application that simulates airport surface operations in fast time using traffic management algorithms. It moves aircraft on the airport surface based on information provided by scheduling algorithm prototypes, monitors separation violation and scheduling conformance, and produces scheduling algorithm performance data.

Desktop-VR system for preflight 3D navigation training

NASA Astrophysics Data System (ADS)

Aoki, Hirofumi; Oman, Charles M.; Buckland, Daniel A.; Natapoff, Alan

Crews who inhabit spacecraft with complex 3D architecture frequently report inflight disorientation and navigation problems. Preflight virtual reality (VR) training may reduce those risks. Although immersive VR techniques may better support spatial orientation training in a local environment, a non-immersive desktop (DT) system may be more convenient for navigation training in "building scale" spaces, especially if the two methods achieve comparable results. In this study trainees' orientation and navigation performance during simulated space station emergency egress tasks was compared while using immersive head-mounted display (HMD) and DT-VR systems. Analyses showed no differences in pointing angular-error or egress time among the groups. The HMD group was significantly faster than DT group when pointing from destination to start location and from start toward different destination. However, this may be attributed to differences in the input device used (a head-tracker for HMD group vs. a keyboard touchpad or a gamepad in the DT group). All other 3D navigation performance measures were similar using the immersive and non-immersive VR systems, suggesting that the simpler desktop VR system may be useful for astronaut 3D navigation training.

Development of a small-scale computer cluster

NASA Astrophysics Data System (ADS)

Wilhelm, Jay; Smith, Justin T.; Smith, James E.

2008-04-01

An increase in demand for computing power in academia has necessitated the need for high performance machines. Computing power of a single processor has been steadily increasing, but lags behind the demand for fast simulations. Since a single processor has hard limits to its performance, a cluster of computers can have the ability to multiply the performance of a single computer with the proper software. Cluster computing has therefore become a much sought after technology. Typical desktop computers could be used for cluster computing, but are not intended for constant full speed operation and take up more space than rack mount servers. Specialty computers that are designed to be used in clusters meet high availability and space requirements, but can be costly. A market segment exists where custom built desktop computers can be arranged in a rack mount situation, gaining the space saving of traditional rack mount computers while remaining cost effective. To explore these possibilities, an experiment was performed to develop a computing cluster using desktop components for the purpose of decreasing computation time of advanced simulations. This study indicates that small-scale cluster can be built from off-the-shelf components which multiplies the performance of a single desktop machine, while minimizing occupied space and still remaining cost effective.

Sequences of Normative Evaluation in Two Telecollaboration Projects: A Comparative Study of Multimodal Feedback through Desktop Videoconference

ERIC Educational Resources Information Center

Cappellini, Marco; Azaoui, Brahim

2017-01-01

In our study we analyse how the same interactional dynamic is produced in two different pedagogical settings exploiting a desktop videoconference system. We propose to focus our attention on a specific type of conversational side sequence, known in the Francophone literature as sequences of normative evaluation. More particularly, we analyse data…

omniClassifier: a Desktop Grid Computing System for Big Data Prediction Modeling

PubMed Central

Phan, John H.; Kothari, Sonal; Wang, May D.

2016-01-01

Robust prediction models are important for numerous science, engineering, and biomedical applications. However, best-practice procedures for optimizing prediction models can be computationally complex, especially when choosing models from among hundreds or thousands of parameter choices. Computational complexity has further increased with the growth of data in these fields, concurrent with the era of “Big Data”. Grid computing is a potential solution to the computational challenges of Big Data. Desktop grid computing, which uses idle CPU cycles of commodity desktop machines, coupled with commercial cloud computing resources can enable research labs to gain easier and more cost effective access to vast computing resources. We have developed omniClassifier, a multi-purpose prediction modeling application that provides researchers with a tool for conducting machine learning research within the guidelines of recommended best-practices. omniClassifier is implemented as a desktop grid computing system using the Berkeley Open Infrastructure for Network Computing (BOINC) middleware. In addition to describing implementation details, we use various gene expression datasets to demonstrate the potential scalability of omniClassifier for efficient and robust Big Data prediction modeling. A prototype of omniClassifier can be accessed at http://omniclassifier.bme.gatech.edu/. PMID:27532062

The Virtual Desktop: Options and Challenges in Selecting a Secure Desktop Infrastructure Based on Virtualization

DTIC Science & Technology

2011-10-01

Fortunately, some products offer centralized management and deployment tools for local desktop implementation . Figure 5 illustrates the... implementation of a secure desktop infrastructure based on virtualization. It includes an overview of desktop virtualization, including an in-depth...environment in the data centre, whereas LHVD places it on the endpoint itself. Desktop virtualization implementation considerations and potential

Providing Assistive Technology Applications as a Service Through Cloud Computing.

PubMed

Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

2015-01-01

Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

Mobile Monitoring Stations and Web Visualization of Biotelemetric System - Guardian II

NASA Astrophysics Data System (ADS)

Krejcar, Ondrej; Janckulik, Dalibor; Motalova, Leona; Kufel, Jan

The main area of interest of our project is to provide solution which can be used in different areas of health care and which will be available through PDAs (Personal Digital Assistants), web browsers or desktop clients. The realized system deals with an ECG sensor connected to mobile equipment, such as PDA/Embedded, based on Microsoft Windows Mobile operating system. The whole system is based on the architecture of .NET Compact Framework, and Microsoft SQL Server. Visualization possibilities of web interface and ECG data are also discussed and final suggestion is made to Microsoft Silverlight solution along with current screenshot representation of implemented solution. The project was successfully tested in real environment in cryogenic room (-136OC).

New generation of 3D desktop computer interfaces

NASA Astrophysics Data System (ADS)

Skerjanc, Robert; Pastoor, Siegmund

1997-05-01

Today's computer interfaces use 2-D displays showing windows, icons and menus and support mouse interactions for handling programs and data files. The interface metaphor is that of a writing desk with (partly) overlapping sheets of documents placed on its top. Recent advances in the development of 3-D display technology give the opportunity to take the interface concept a radical stage further by breaking the design limits of the desktop metaphor. The major advantage of the envisioned 'application space' is, that it offers an additional, immediately perceptible dimension to clearly and constantly visualize the structure and current state of interrelations between documents, videos, application programs and networked systems. In this context, we describe the development of a visual operating system (VOS). Under VOS, applications appear as objects in 3-D space. Users can (graphically connect selected objects to enable communication between the respective applications. VOS includes a general concept of visual and object oriented programming for tasks ranging from, e.g., low-level programming up to high-level application configuration. In order to enable practical operation in an office or at home for many hours, the system should be very comfortable to use. Since typical 3-D equipment used, e.g., in virtual-reality applications (head-mounted displays, data gloves) is rather cumbersome and straining, we suggest to use off-head displays and contact-free interaction techniques. In this article, we introduce an autostereoscopic 3-D display and connected video based interaction techniques which allow viewpoint-depending imaging (by head tracking) and visually controlled modification of data objects and links (by gaze tracking, e.g., to pick, 3-D objects just by looking at them).

Effective Web and Desktop Retrieval with Enhanced Semantic Spaces

NASA Astrophysics Data System (ADS)

Daoud, Amjad M.

We describe the design and implementation of the NETBOOK prototype system for collecting, structuring and efficiently creating semantic vectors for concepts, noun phrases, and documents from a corpus of free full text ebooks available on the World Wide Web. Automatic generation of concept maps from correlated index terms and extracted noun phrases are used to build a powerful conceptual index of individual pages. To ensure scalabilty of our system, dimension reduction is performed using Random Projection [13]. Furthermore, we present a complete evaluation of the relative effectiveness of the NETBOOK system versus the Google Desktop [8].

IMIS desktop & smartphone software solutions for monitoring spacecrafts' payload from anywhere

NASA Astrophysics Data System (ADS)

Baroukh, J.; Queyrut, O.; Airaud, J.

In the past years, the demand for satellite remote operations has increased guided by on one hand, the will to reduce operations cost (on-call operators out of business hours), and on the other hand, the development of cooperation space missions resulting in a world wide distribution of engineers and science team members. Only a few off-the-shelf solutions exist to fulfill the need of remote payload monitoring, and they mainly use proprietary devices. The recent advent of mobile technologies (laptops, smartphones and tablets) as well as the worldwide deployment of broadband networks (3G, Wi-Fi hotspots), has opened up a technical window that brings new options. As part of the Mars Science Laboratory (MSL) mission, the Centre National D'Etudes Spatiales (CNES, the French space agency) has developed a new software solution for monitoring spacecraft payloads. The Instrument Monitoring Interactive Software (IMIS) offers state-of-the-art operational features for payload monitoring, and can be accessed remotely. It was conceived as a generic tool that can be used for heterogeneous payloads and missions. IMIS was designed as a classical client/server architecture. The server is hosted at CNES and acts as a data provider while two different kinds of clients are available depending on the level of mobility required. The first one is a rich client application, built on Eclipse framework, which can be installed on usual operating systems and communicates with the server through the Internet. The second one is a smartphone application for any Android platform, connected to the server thanks to the mobile broadband network or a Wi-Fi connection. This second client is mainly devoted to on-call operations and thus only contains a subset of the IMIS functionalities. This paper describes the operational context, including security aspects, that led IMIS development, presents the selected software architecture and details the various features of both clients: the desktop and the sm- rtphone application.

NOAA/NOS coastal and ocean assessment GIS: Initial application to environmental sensitivity index data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monaco, M.E.; Battista, T.A.; Gill, T.A.

1997-06-01

NOAA`s National Ocean Service (NOS) is developing a suite of desktop geographic information system (GIS) tools to define, assess, and solve coastal resource management issues. This paper describes one component of the emerging NOS Coastal and Ocean Assessment GIS: Environmental Sensitivity Index (ESI) data with emphasis on living marine resource information. This work is underway through a unique federal, state, and private-sector partnership. The desktop GIS is a versatile, user-friendly system designed to provide coastal managers with mapping and analysis capabilities. These functions are under development using the recently generated North Carolina ESI data, with emphasis on accessing, analyzing, andmore » mapping estuarine species distributions. Example system features include: a user-friendly front end, generation of ESI maps and tables, and custom spatial and temporal analyses. Partners in the development of the desktop system include: NOAA`s Office of Ocean Resources Conservation and Assessment (ORCA) and Coastal Services Center, the Minerals Management Service (MMS), Florida Marine Research Institute, Environmental Systems Research Institute, Inc., and Research Planning, Inc. This work complements and supports MMS`s Gulf-wide Information System designed to support oil-spill contingency planning.« less

Context-Aware Active Authentication using Touch Gestures, Typing Patterns and Body Movement

DTIC Science & Technology

2016-03-01

Division Information Directorate This report is published in the interest of scientific and technical information exchange, and its publication does...CA policy clarification memorandum dated 16 Jan 09. 13. SUPPLEMENTARY NOTES 14. ABSTRACT Design, develop and evaluate a desktop based active...of this project was to design, develop and evaluate a desktop active authentication system that uses the following keystroke timing based biometric

The changing nature of spacecraft operations: From the Vikings of the 1970's to the great observatories of the 1990's and beyond

NASA Technical Reports Server (NTRS)

Ledbetter, Kenneth W.

1992-01-01

Four trends in spacecraft flight operations are discussed which will reduce overall program costs. These trends are the use of high-speed, highly reliable data communications systems for distributing operations functions to more convenient and cost-effective sites; the improved capability for remote operation of sensors; a continued rapid increase in memory and processing speed of flight qualified computer chips; and increasingly capable ground-based hardware and software systems, notably those augmented by artificial intelligence functions. Changes reflected by these trends are reviewed starting from the NASA Viking missions of the early 70s, when mission control was conducted at one location using expensive and cumbersome mainframe computers and communications equipment. In the 1980s, powerful desktop computers and modems enabled the Magellan project team to operate the spacecraft remotely. In the 1990s, the Hubble Space Telescope project uses multiple color screens and automated sequencing software on small computers. Given a projection of current capabilities, future control centers will be even more cost-effective.

Multimedia architectures: from desktop systems to portable appliances

NASA Astrophysics Data System (ADS)

Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

1997-01-01

Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

A desktop 3D printer with dual extruders to produce customised electronic circuitry

NASA Astrophysics Data System (ADS)

Butt, Javaid; Onimowo, Dominic Adaoiza; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

2018-03-01

3D printing has opened new horizons for the manufacturing industry in general, and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to the industrial ones. In this paper, a desktop 3D printer called Prusa Mendel i2 has been modified and integrated with an additional extruder so that the system can work with dual extruders and produce bespoke electronic circuits. The communication between the two extruders has been established by making use of the In-Chip Serial Programming port on the Arduino Uno controlling the printer. The biggest challenge is to control the flow of electric paint (to be dispensed by the new extruder) and CFD (Computational Fluid Dynamics) analysis has been carried out to ascertain the optimal conditions for proper dispensing. The final product is a customised electronic circuit with the base of plastic (from the 3D printer's extruder) and electronic paint (from the additional extruder) properly dispensed to create a live circuit on a plastic platform. This low-cost enhancement to a desktop 3D printer can provide a new prospect to produce multiple material parts where the additional extruder can be filled with any material that can be properly dispensed from its nozzle.

An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younkin, James R; Kuhn, Michael J; Gradle, Colleen

New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integratedmore » into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.« less

A simple grid implementation with Berkeley Open Infrastructure for Network Computing using BLAST as a model

PubMed Central

Pinthong, Watthanai; Muangruen, Panya

2016-01-01

Development of high-throughput technologies, such as Next-generation sequencing, allows thousands of experiments to be performed simultaneously while reducing resource requirement. Consequently, a massive amount of experiment data is now rapidly generated. Nevertheless, the data are not readily usable or meaningful until they are further analysed and interpreted. Due to the size of the data, a high performance computer (HPC) is required for the analysis and interpretation. However, the HPC is expensive and difficult to access. Other means were developed to allow researchers to acquire the power of HPC without a need to purchase and maintain one such as cloud computing services and grid computing system. In this study, we implemented grid computing in a computer training center environment using Berkeley Open Infrastructure for Network Computing (BOINC) as a job distributor and data manager combining all desktop computers to virtualize the HPC. Fifty desktop computers were used for setting up a grid system during the off-hours. In order to test the performance of the grid system, we adapted the Basic Local Alignment Search Tools (BLAST) to the BOINC system. Sequencing results from Illumina platform were aligned to the human genome database by BLAST on the grid system. The result and processing time were compared to those from a single desktop computer and HPC. The estimated durations of BLAST analysis for 4 million sequence reads on a desktop PC, HPC and the grid system were 568, 24 and 5 days, respectively. Thus, the grid implementation of BLAST by BOINC is an efficient alternative to the HPC for sequence alignment. The grid implementation by BOINC also helped tap unused computing resources during the off-hours and could be easily modified for other available bioinformatics software. PMID:27547555

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning.

PubMed

Velasco, Ignacio; Vahdani, Soheil; Ramos, Hector

2017-09-01

Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient's maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words: 3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma.

Hybrid cryptosystem for image file using elgamal and double playfair cipher algorithm

NASA Astrophysics Data System (ADS)

Hardi, S. M.; Tarigan, J. T.; Safrina, N.

2018-03-01

In this paper, we present an implementation of an image file encryption using hybrid cryptography. We chose ElGamal algorithm to perform asymmetric encryption and Double Playfair for the symmetric encryption. Our objective is to show that these algorithms are capable to encrypt an image file with an acceptable running time and encrypted file size while maintaining the level of security. The application was built using C# programming language and ran as a stand alone desktop application under Windows Operating System. Our test shows that the system is capable to encrypt an image with a resolution of 500×500 to a size of 976 kilobytes with an acceptable running time.

Web and Desktop Applications for ALMA Science Verification Data

NASA Astrophysics Data System (ADS)

Shirasaki, Y.; Kawasaki, W.; Eguchi, S.; Komiya, Y.; Kosugi, G.; Ohishi, M.; Mizumoto, Y.

2013-10-01

ALMA is the largest radio telescope operating in Chile, and it is expected to produce 200 TB of data every year. Even a data cube obtained for a single source can exceed 1 TB. It is, therefore, crucial to reduce the size of data transmitted through the Internet by doing a cutout of a part of a data cube and/or reducing the spatial/frequency resolution before transferring the data. To specify the cutout region or required resolution, one needs to overview the whole of the data without transferring the large data cube. For this purpose, we developed two applications for quick-looking ALMA data cube, ALMA Web QL and Desktop Viewer (Vissage).

Design of MPPT Controller Monitoring Software Based on QT Framework

NASA Astrophysics Data System (ADS)

Meng, X. Z.; Lu, P. G.

2017-10-01

The MPPT controller was a hardware device for tracking the maximum power point of solar photovoltaic array. Multiple controllers could be working as networking mode by specific communicating protocol. In this article, based on C++ GUI programming with Qt frame, we designed one sort of desktop application for monitoring and analyzing operational parameter of MPPT controller. The type of communicating protocol for building network was Modbus protocol which using Remote Terminal Unit mode and The desktop application of host computer was connected with all the controllers in the network through RS485 communication or ZigBee wireless communication. Using this application, user could monitor the parameter of controller wherever they were by internet.

Evaluating Mobile Graphics Processing Units (GPUs) for Real-Time Resource Constrained Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meredith, J; Conger, J; Liu, Y

2005-11-11

Modern graphics processing units (GPUs) can provide tremendous performance boosts for some applications beyond what a single CPU can accomplish, and their performance is growing at a rate faster than CPUs as well. Mobile GPUs available for laptops have the small form factor and low power requirements suitable for use in embedded processing. We evaluated several desktop and mobile GPUs and CPUs on traditional and non-traditional graphics tasks, as well as on the most time consuming pieces of a full hyperspectral imaging application. Accuracy remained high despite small differences in arithmetic operations like rounding. Performance improvements are summarized here relativemore » to a desktop Pentium 4 CPU.« less

Micromagnetics on high-performance workstation and mobile computational platforms

NASA Astrophysics Data System (ADS)

Fu, S.; Chang, R.; Couture, S.; Menarini, M.; Escobar, M. A.; Kuteifan, M.; Lubarda, M.; Gabay, D.; Lomakin, V.

2015-05-01

The feasibility of using high-performance desktop and embedded mobile computational platforms is presented, including multi-core Intel central processing unit, Nvidia desktop graphics processing units, and Nvidia Jetson TK1 Platform. FastMag finite element method-based micromagnetic simulator is used as a testbed, showing high efficiency on all the platforms. Optimization aspects of improving the performance of the mobile systems are discussed. The high performance, low cost, low power consumption, and rapid performance increase of the embedded mobile systems make them a promising candidate for micromagnetic simulations. Such architectures can be used as standalone systems or can be built as low-power computing clusters.

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

The Nimrod computational workbench: a case study in desktop metacomputing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramson, D.; Sosic, R.; Foster, I.

The coordinated use of geographically distributed computers, or metacomputing, can in principle provide more accessible and cost- effective supercomputing than conventional high-performance systems. However, we lack evidence that metacomputing systems can be made easily usable, or that there exist large numbers of applications able to exploit metacomputing resources. In this paper, we present work that addresses both these concerns. The basis for this work is a system called Nimrod that provides a desktop problem-solving environment for parametric experiments. We describe how Nimrod has been extended to support the scheduling of computational resources located in a wide-area environment, and report onmore » an experiment in which Nimrod was used to schedule a large parametric study across the Australian Internet. The experiment provided both new scientific results and insights into Nimrod capabilities. We relate the results of this experiment to lessons learned from the I-WAY distributed computing experiment, and draw conclusions as to how Nimrod and I-WAY- like computing environments should be developed to support desktop metacomputing.« less

Investigation on experimental techniques to detect, locate and quantify gear noise in helicopter transmissions

NASA Technical Reports Server (NTRS)

Flanagan, P. M.; Atherton, W. J.

1985-01-01

A robotic system to automate the detection, location, and quantification of gear noise using acoustic intensity measurement techniques has been successfully developed. Major system components fabricated under this grant include an instrumentation robot arm, a robot digital control unit and system software. A commercial, desktop computer, spectrum analyzer and two microphone probe complete the equipment required for the Robotic Acoustic Intensity Measurement System (RAIMS). Large-scale acoustic studies of gear noise in helicopter transmissions cannot be performed accurately and reliably using presently available instrumentation and techniques. Operator safety is a major concern in certain gear noise studies due to the operating environment. The man-hours needed to document a noise field in situ is another shortcoming of present techniques. RAIMS was designed to reduce the labor and hazard in collecting data and to improve the accuracy and repeatability of characterizing the acoustic field by automating the measurement process. Using RAIMS a system operator can remotely control the instrumentation robot to scan surface areas and volumes generating acoustic intensity information using the two microphone technique. Acoustic intensity studies requiring hours of scan time can be performed automatically without operator assistance. During a scan sequence, the acoustic intensity probe is positioned by the robot and acoustic intensity data is collected, processed, and stored.

Align and conquer: moving toward plug-and-play color imaging

NASA Astrophysics Data System (ADS)

Lee, Ho J.

1996-03-01

The rapid evolution of the low-cost color printing and image capture markets has precipitated a huge increase in the use of color imagery by casual end users on desktop systems, as opposed to traditional professional color users working with specialized equipment. While the cost of color equipment and software has decreased dramatically, the underlying system-level problems associated with color reproduction have remained the same, and in many cases are more difficult to address in a casual environment than in a professional setting. The proliferation of color imaging technologies so far has resulted in a wide availability of component solutions which work together poorly. A similar situation in the desktop computing market has led to the various `Plug-and-Play' standards, which provide a degree of interoperability between a range of products on disparate computing platforms. This presentation will discuss some of the underlying issues and emerging trends in the desktop and consumer digital color imaging markets.

Aviation Simulators for the Desktop: Panel and Demonstrations

NASA Technical Reports Server (NTRS)

Pisanich, Greg; Rosekind, Marl R. (Technical Monitor)

1997-01-01

Panel Members are: Christine M. Mitchell (Georgia Tech), Michael T. Palmer (NASA Langley), Greg Pisani (NASA Ames), and Amy R. Pritchett (MIT). The Panel members are affiliated with aviation human factors groups from NASA Ames, NASA Langley, MITCHELL Department of Aerospace and Aeronautical Engineering, and Georgia Technics Center for Human-Machine Systems Research. Panelists will describe the simulator(s) used in their respective institutions including a description of the FMS aircraft models, software, hardware, and displays. Panelists will summarize previous, on-going, and planned empirical studies conducted with the simulators. Greg Pisanich will describe two NASA Ames simulation systems: the Stone Soup Simulator (SSS), and the Airspace Operations Human Factors Simulation Laboratory. The the Stone Soup Simulator is a desktop-based, research flight simulator that includes mode control, flight management, and datalink functionality. It has been developed as a non-proprietary simulator that can be easily distributed to academic and industry researchers who are collaborating on NASA research projects. It will be used and extended by research groups represented by at least two panelists (Mitchell and Palmer). The Airspace Operations Simulator supports the study of air traffic control in conjunction with the flight deck. This simulator will be used provide an environment in which many AATT and free flight concepts can be demonstrated and evaluated. Mike Palmer will describe two NASA Langley efforts: The Langley Simulator and MD-11 extensions to the NASA Amesbury simulator. The first simulator is publicly available and combines a B-737 model with a high fidelity flight management system. The second simulator enhances the S3 simulator with MD-11 electronic flight displays together with modifications to the flight and FMS models to emulate MD-11 dynamics and operations. Chris Mitchell will describe GT-EFIRT (Georgia Tech-Electronic Flight Instrument Research Tool) and B-757 enhancements to the NASA Ames S3. GT-EFIRT is a medium fidelity simulator used to conduct preliminary studies of the CATS (crew activity tracking system). Like the Langley efforts with S3, the Georgia Tech enhancements will allow it to emulate the dynamics and operations of a widely used glass cockpit. Amy Pritchett will describe the MIT simulator(s) that have been used in a range of research investigating cockpit displays, warning devices, and flight deck-ATC interaction.

The value of Web-based library services at Cedars-Sinai Health System.

PubMed

Halub, L P

1999-07-01

Cedars-Sinai Medical Library/Information Center has maintained Web-based services since 1995 on the Cedars-Sinai Health System network. In that time, the librarians have found the provision of Web-based services to be a very worthwhile endeavor. Library users value the services that they access from their desktops because the services save time. They also appreciate being able to access services at their convenience, without restriction by the library's hours of operation. The library values its Web site because it brings increased visibility within the health system, and it enables library staff to expand services when budget restrictions have forced reduced hours of operation. In creating and maintaining the information center Web site, the librarians have learned the following lessons: consider the design carefully; offer what services you can, but weigh the advantages of providing the services against the time required to maintain them; make the content as accessible as possible; promote your Web site; and make friends in other departments, especially information services.

The value of Web-based library services at Cedars-Sinai Health System.

PubMed Central

Halub, L P

1999-01-01

Cedars-Sinai Medical Library/Information Center has maintained Web-based services since 1995 on the Cedars-Sinai Health System network. In that time, the librarians have found the provision of Web-based services to be a very worthwhile endeavor. Library users value the services that they access from their desktops because the services save time. They also appreciate being able to access services at their convenience, without restriction by the library's hours of operation. The library values its Web site because it brings increased visibility within the health system, and it enables library staff to expand services when budget restrictions have forced reduced hours of operation. In creating and maintaining the information center Web site, the librarians have learned the following lessons: consider the design carefully; offer what services you can, but weigh the advantages of providing the services against the time required to maintain them; make the content as accessible as possible; promote your Web site; and make friends in other departments, especially information services. PMID:10427423

Multi-Attribute Task Battery - Applications in pilot workload and strategic behavior research

NASA Technical Reports Server (NTRS)

Arnegard, Ruth J.; Comstock, J. R., Jr.

1991-01-01

The Multi-Attribute Task (MAT) Battery provides a benchmark set of tasks for use in a wide range of lab studies of operator performance and workload. The battery incorporates tasks analogous to activities that aircraft crewmembers perform in flight, while providing a high degree of experimenter control, performance data on each subtask, and freedom to nonpilot test subjects. Features not found in existing computer based tasks include an auditory communication task (to simulate Air Traffic Control communication), a resource management task permitting many avenues or strategies of maintaining target performance, a scheduling window which gives the operator information about future task demands, and the option of manual or automated control of tasks. Performance data are generated for each subtask. In addition, the task battery may be paused and onscreen workload rating scales presented to the subject. The MAT Battery requires a desktop computer with color graphics. The communication task requires a serial link to a second desktop computer with a voice synthesizer or digitizer card.

Distributed Observer Network

NASA Technical Reports Server (NTRS)

2008-01-01

NASA s advanced visual simulations are essential for analyses associated with life cycle planning, design, training, testing, operations, and evaluation. Kennedy Space Center, in particular, uses simulations for ground services and space exploration planning in an effort to reduce risk and costs while improving safety and performance. However, it has been difficult to circulate and share the results of simulation tools among the field centers, and distance and travel expenses have made timely collaboration even harder. In response, NASA joined with Valador Inc. to develop the Distributed Observer Network (DON), a collaborative environment that leverages game technology to bring 3-D simulations to conventional desktop and laptop computers. DON enables teams of engineers working on design and operations to view and collaborate on 3-D representations of data generated by authoritative tools. DON takes models and telemetry from these sources and, using commercial game engine technology, displays the simulation results in a 3-D visual environment. Multiple widely dispersed users, working individually or in groups, can view and analyze simulation results on desktop and laptop computers in real time.

Using Desk-Top Publishing to Develop Literacy.

ERIC Educational Resources Information Center

Wray, David; Medwell, Jane

1989-01-01

Examines the learning benefits which may accrue from using desk-top publishing techniques with children, especially in terms of the development of literacy skills. Analyzes desk-top publishing as an extension of word processing and describes some ways of using desk-top publishing in the classroom. (RS)

The CosmicWatch Desktop Muon Detector: a self-contained, pocket sized particle detector

NASA Astrophysics Data System (ADS)

Axani, S. N.; Frankiewicz, K.; Conrad, J. M.

2018-03-01

The CosmicWatch Desktop Muon Detector is a self-contained, hand-held cosmic ray muon detector that is valuable for astro/particle physics research applications and outreach. The material cost of each detector is under 100 and it takes a novice student approximately four hours to build their first detector. The detectors are powered via a USB connection and the data can either be recorded directly to a computer or to a microSD card. Arduino- and Python-based software is provided to operate the detector and an online application to plot the data in real-time. In this paper, we describe the various design features, evaluate the performance, and illustrate the detectors capabilities by providing several example measurements.

ABrIL - Advanced Brain Imaging Lab : a cloud based computation environment for cooperative neuroimaging projects.

PubMed

Neves Tafula, Sérgio M; Moreira da Silva, Nádia; Rozanski, Verena E; Silva Cunha, João Paulo

2014-01-01

Neuroscience is an increasingly multidisciplinary and highly cooperative field where neuroimaging plays an important role. Neuroimaging rapid evolution is demanding for a growing number of computing resources and skills that need to be put in place at every lab. Typically each group tries to setup their own servers and workstations to support their neuroimaging needs, having to learn from Operating System management to specific neuroscience software tools details before any results can be obtained from each setup. This setup and learning process is replicated in every lab, even if a strong collaboration among several groups is going on. In this paper we present a new cloud service model - Brain Imaging Application as a Service (BiAaaS) - and one of its implementation - Advanced Brain Imaging Lab (ABrIL) - in the form of an ubiquitous virtual desktop remote infrastructure that offers a set of neuroimaging computational services in an interactive neuroscientist-friendly graphical user interface (GUI). This remote desktop has been used for several multi-institution cooperative projects with different neuroscience objectives that already achieved important results, such as the contribution to a high impact paper published in the January issue of the Neuroimage journal. The ABrIL system has shown its applicability in several neuroscience projects with a relatively low-cost, promoting truly collaborative actions and speeding up project results and their clinical applicability.

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning

PubMed Central

Vahdani, Soheil; Ramos, Hector

2017-01-01

Background Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Material and Methods Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient’s maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. Conclusions MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words:3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma. PMID:29075412

Pages from the Desktop: Desktop Publishing Today.

ERIC Educational Resources Information Center

Crawford, Walt

1994-01-01

Discusses changes that have made desktop publishing appealing and reasonably priced. Hardware, software, and printer options for getting started and moving on, typeface developments, and the key characteristics of desktop publishing are described. The author's notes on 33 articles from the personal computing literature from January-March 1994 are…

Desktop Publishing: A Brave New World and Publishing from the Desktop.

ERIC Educational Resources Information Center

Lormand, Robert; Rowe, Jane J.

1988-01-01

The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

Common Sense Wordworking III: Desktop Publishing and Desktop Typesetting.

ERIC Educational Resources Information Center

Crawford, Walt

1987-01-01

Describes current desktop publishing packages available for microcomputers and discusses the disadvantages, especially in cost, for most personal computer users. Also described is a less expensive alternative technology--desktop typesetting--which meets the requirements of users who do not need elaborate techniques for combining text and graphics.…

Onward to Petaflops Computing

NASA Technical Reports Server (NTRS)

Bailey, David H.; Chancellor, Marisa K. (Technical Monitor)

1997-01-01

With programs such as the US High Performance Computing and Communications Program (HPCCP), the attention of scientists and engineers worldwide has been focused on the potential of very high performance scientific computing, namely systems that are hundreds or thousands of times more powerful than those typically available in desktop systems at any given point in time. Extending the frontiers of computing in this manner has resulted in remarkable advances, both in computing technology itself and also in the various scientific and engineering disciplines that utilize these systems. Within the month or two, a sustained rate of 1 Tflop/s (also written 1 teraflops, or 10(exp 12) floating-point operations per second) is likely to be achieved by the 'ASCI Red' system at Sandia National Laboratory in New Mexico. With this objective in sight, it is reasonable to ask what lies ahead for high-end computing.

A PC-Based Free Text DSS for Health Care

NASA Technical Reports Server (NTRS)

Grams, Ralph R.; Buchanan, Paul; Massey, James K.; Jin, Ming

1987-01-01

A free Decision Support System(DST) has been constructed for health care professional that allows the analysis of complex medical cases and the creation of diagnostic list of potential diseases for clinical evaluation.The system uses a PC-based text management system specifically designed for desktop operation. The texts employed in the decision support package include the Merck Manual (published by Merck Sharpe & Dohme) and Control of Communicable Diseas in Man (published by the American Public Health Association). The background and design of the database are discussed along with a structured analysis procedure for handling free text DSS system. A case study is presented to show the application of this technology and conclusions are drawn in the summary that point to expanded areas of professional intention and new frontiers yet to be explored in this rapidly progressing field.

Fast neural net simulation with a DSP processor array.

PubMed

Muller, U A; Gunzinger, A; Guggenbuhl, W

1995-01-01

This paper describes the implementation of a fast neural net simulator on a novel parallel distributed-memory computer. A 60-processor system, named MUSIC (multiprocessor system with intelligent communication), is operational and runs the backpropagation algorithm at a speed of 330 million connection updates per second (continuous weight update) using 32-b floating-point precision. This is equal to 1.4 Gflops sustained performance. The complete system with 3.8 Gflops peak performance consumes less than 800 W of electrical power and fits into a 19-in rack. While reaching the speed of modern supercomputers, MUSIC still can be used as a personal desktop computer at a researcher's own disposal. In neural net simulation, this gives a computing performance to a single user which was unthinkable before. The system's real-time interfaces make it especially useful for embedded applications.

Competition in Defense Acquisitions

DTIC Science & Technology

2008-05-14

NASA employees to maintain desktop assets No way to track costs, no standardization, not tracking service quality NASA’s Outsourcing Desktop...assets to the private sector. ODIN Goals Cut desktop computing costs Increase service quality Achieve interoperability and standardization Focus...not tracking service quality NASA’s Outsourcing Desktop Initiative (ODIN) transferred the responsibility for providing and managing the vast

Desktop Video Productions. ICEM Guidelines Publications No. 6.

ERIC Educational Resources Information Center

Taufour, P. A.

Desktop video consists of integrating the processing of the video signal in a microcomputer. This definition implies that desktop video can take multiple forms such as virtual editing or digital video. Desktop video, which does not imply any particular technology, has been approached in different ways in different technical fields. It remains a…

Desktop Technology for Newspapers: Use of the Computer Tool.

ERIC Educational Resources Information Center

Wilson, Howard Alan

This work considers desktop publishing technology as a way used to paginate newspapers electronically, tracing the technology's development from the beginning of desktop publishing in the mid-1980s to the 1990s. The work emphasizes how desktop publishing technology is and can be used by weekly newspapers. It reports on a Pennsylvania weekly…

Payload accommodation and development planning tools - A Desktop Resource Leveling Model (DRLM)

NASA Technical Reports Server (NTRS)

Hilchey, John D.; Ledbetter, Bobby; Williams, Richard C.

1989-01-01

The Desktop Resource Leveling Model (DRLM) has been developed as a tool to rapidly structure and manipulate accommodation, schedule, and funding profiles for any kind of experiments, payloads, facilities, and flight systems or other project hardware. The model creates detailed databases describing 'end item' parameters, such as mass, volume, power requirements or costs and schedules for payload, subsystem, or flight system elements. It automatically spreads costs by calendar quarters and sums costs or accommodation parameters by total project, payload, facility, payload launch, or program phase. Final results can be saved or printed out, automatically documenting all assumptions, inputs, and defaults.

Leveraging Commercially Issued Multi-Factor Identification Credentials

NASA Technical Reports Server (NTRS)

Baldridge, Tim W.

2010-01-01

This slide presentation reviews the Identity, Credential and Access Management (ICAM) system. This system is a complete system of identity management, access to desktops and applications, use of smartcards, and building access throughout NASA.

Prevalence of Invalid Computerized Baseline Neurocognitive Test Results in High School and Collegiate Athletes

PubMed Central

Schatz, Philip; Moser, Rosemarie Scolaro; Solomon, Gary S.; Ott, Summer D.; Karpf, Robin

2012-01-01

Context: Limited data are available regarding the prevalence and nature of invalid computerized baseline neurocognitive test data. Objective: To identify the prevalence of invalid baselines on the desktop and online versions of ImPACT and to document the utility of correcting for left-right (L-R) confusion on the desktop version of ImPACT. Design: Cross-sectional study of independent samples of high school (HS) and collegiate athletes who completed the desktop or online versions of ImPACT. Participants or Other Participants: A total of 3769 HS (desktop  =  1617, online  =  2152) and 2130 collegiate (desktop  =  742, online  =  1388) athletes completed preseason baseline assessments. Main Outcome Measure(s): Prevalence of 5 ImPACT validity indicators, with correction for L-R confusion (reversing left and right mouse-click responses) on the desktop version, by test version and group. Chi-square analyses were conducted for sex and attentional or learning disorders. Results: At least 1 invalid indicator was present on 11.9% (desktop) versus 6.3% (online) of the HS baselines and 10.2% (desktop) versus 4.1% (online) of collegiate baselines; correcting for L-R confusion (desktop) decreased this overall prevalence to 8.4% (HS) and 7.5% (collegiate). Online Impulse Control scores alone yielded 0.4% (HS) and 0.9% (collegiate) invalid baselines, compared with 9.0% (HS) and 5.4% (collegiate) on the desktop version; correcting for L-R confusion (desktop) decreased the prevalence of invalid Impulse Control scores to 5.4% (HS) and 2.6% (collegiate). Male athletes and HS athletes with attention deficit or learning disorders who took the online version were more likely to have at least 1 invalid indicator. Utility of additional invalidity indicators is reported. Conclusions: The online ImPACT version appeared to yield fewer invalid baseline results than did the desktop version. Identification of L-R confusion reduces the prevalence of invalid baselines (desktop only) and the potency of Impulse Control as a validity indicator. We advise test administrators to be vigilant in identifying invalid baseline results as part of routine concussion management and prevention programs. PMID:22892410

Low-cost USB interface for operant research using Arduino and Visual Basic.

PubMed

Escobar, Rogelio; Pérez-Herrera, Carlos A

2015-03-01

This note describes the design of a low-cost interface using Arduino microcontroller boards and Visual Basic programming for operant conditioning research. The board executes one program in Arduino programming language that polls the state of the inputs and generates outputs in an operant chamber. This program communicates through a USB port with another program written in Visual Basic 2010 Express Edition running on a laptop, desktop, netbook computer, or even a tablet equipped with Windows operating system. The Visual Basic program controls schedules of reinforcement and records real-time data. A single Arduino board can be used to control a total of 52 inputs/output lines, and multiple Arduino boards can be used to control multiple operant chambers. An external power supply and a series of micro relays are required to control 28-V DC devices commonly used in operant chambers. Instructions for downloading and using the programs to generate simple and concurrent schedules of reinforcement are provided. Testing suggests that the interface is reliable, accurate, and could serve as an inexpensive alternative to commercial equipment. © Society for the Experimental Analysis of Behavior.

Task Scheduling in Desktop Grids: Open Problems

NASA Astrophysics Data System (ADS)

Chernov, Ilya; Nikitina, Natalia; Ivashko, Evgeny

2017-12-01

We survey the areas of Desktop Grid task scheduling that seem to be insufficiently studied so far and are promising for efficiency, reliability, and quality of Desktop Grid computing. These topics include optimal task grouping, "needle in a haystack" paradigm, game-theoretical scheduling, domain-imposed approaches, special optimization of the final stage of the batch computation, and Enterprise Desktop Grids.

A Librarian Without Books:Systems Librarianship in Astronomy

NASA Astrophysics Data System (ADS)

Kneale, R. A.

2007-10-01

The author discusses one aspect of the changing nature of librarianship by focusing on a high-tech microcosm of an already high-tech profession, that of systems librarianship. She is the Systems Librarian for the Advanced Technology Solar Telescope (ATST) project, based in Tucson, Arizona. The project is engaged in the design and development of a 4-meter solar telescope, planned for the summit of Haleakalā, Maui, Hawai'i. Most of the day-to-day tasks at ATST involve software in one form or another; the author makes heavy use of Remote Desktop and Virtual Network Computing (VNC) to manage installations on eight different servers (four Windows, four Unix) in two states, plus staff desktops (Windows XP) from the comfy chair in front of her computer.

Software Workshop.

ERIC Educational Resources Information Center

Lazerick, Beth

1990-01-01

This article describes desktop publishing and discusses the features and classroom uses of one of the newest desktop publishing programs. Several desktop publishing projects for teachers and students are suggested. (IAH)

Proposal and Implementation of SSH Client System Using Ajax

NASA Astrophysics Data System (ADS)

Kosuda, Yusuke; Sasaki, Ryoichi

Technology called Ajax gives web applications the functionality and operability of desktop applications. In this study, we propose and implement a Secure Shell (SSH) client system using Ajax, independent of the OS or Java execution environment. In this system, SSH packets are generated on a web browser by using JavaScript and a web server works as a proxy in communication with an SSH server to realize end-to-end SSH communication. We implemented a prototype program and confirmed by experiment that it runs on several web browsers and mobile phones. This system has enabled secure SSH communication from a PC at an Internet cafe or any mobile phone. By measuring the processing performance, we verified satisfactory performance for emergency use, although the speed was unsatisfactory in some cases with mobile phone. The system proposed in this study will be effective in various fields of E-Business.

Disaster easily averted? Data confidentiality and the hospital desktop computer.

PubMed

Sethi, Neeraj; Lane, Gethin; Newton, Sophie; Egan, Philip; Ghosh, Samit

2014-05-01

We specifically identified the hospital desktop computer as a potential source of breaches in confidentiality. We aimed to evaluate if there was accessible, unprotected, confidential information stored on the desktop screen on computers in a district general hospital and if so, how a teaching intervention could improve this situation. An unannounced spot check of 59 ward computers was performed. Data were collected regarding how many had confidential information stored on the desktop screen without any password protection. An online learning module was mandated for healthcare staff and a second cycle of inspection performed. A district general hospital. Two doctors conducted the audit. Computers in clinical areas were assessed. All clinical staff with computer access underwent the online learning module. An online learning module regarding data protection and confidentiality. In the first cycle, 55% of ward computers had easily accessible patient or staff confidential information stored on their desktop screen. This included handovers, referral letters, staff sick leave lists, audits and nursing reports. The majority (85%) of computers accessed were logged in under a generic username and password. The intervention produced an improvement in the second cycle findings with only 26% of computers being found to have unprotected confidential information stored on them. The failure to comply with appropriate confidential data protection regulations is a persistent problem. Education produces some improvement but we also propose a systemic approach to solving this problem. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Cryogenic Multichannel Pressure Sensor With Electronic Scanning

NASA Technical Reports Server (NTRS)

Hopson, Purnell, Jr.; Chapman, John J.; Kruse, Nancy M. H.

1994-01-01

Array of pressure sensors operates reliably and repeatably over wide temperature range, extending from normal boiling point of water down to boiling point of nitrogen. Sensors accurate and repeat to within 0.1 percent. Operate for 12 months without need for recalibration. Array scanned electronically, sensor readings multiplexed and sent to desktop computer for processing and storage. Used to measure distributions of pressure in research on boundary layers at high Reynolds numbers, achieved by low temperatures.

Semantic Desktop

NASA Astrophysics Data System (ADS)

Sauermann, Leo; Kiesel, Malte; Schumacher, Kinga; Bernardi, Ansgar

In diesem Beitrag wird gezeigt, wie der Arbeitsplatz der Zukunft aussehen könnte und wo das Semantic Web neue Möglichkeiten eröffnet. Dazu werden Ansätze aus dem Bereich Semantic Web, Knowledge Representation, Desktop-Anwendungen und Visualisierung vorgestellt, die es uns ermöglichen, die bestehenden Daten eines Benutzers neu zu interpretieren und zu verwenden. Dabei bringt die Kombination von Semantic Web und Desktop Computern besondere Vorteile - ein Paradigma, das unter dem Titel Semantic Desktop bekannt ist. Die beschriebenen Möglichkeiten der Applikationsintegration sind aber nicht auf den Desktop beschränkt, sondern können genauso in Web-Anwendungen Verwendung finden.

Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

PubMed

Wells, I G; Cartwright, R Y; Farnan, L P

1993-12-15

The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

Framework for Deploying a Virtualized Computing Environment for Collaborative and Secure Data Analytics

PubMed Central

Meyer, Adrian; Green, Laura; Faulk, Ciearro; Galla, Stephen; Meyer, Anne-Marie

2016-01-01

Introduction: Large amounts of health data generated by a wide range of health care applications across a variety of systems have the potential to offer valuable insight into populations and health care systems, but robust and secure computing and analytic systems are required to leverage this information. Framework: We discuss our experiences deploying a Secure Data Analysis Platform (SeDAP), and provide a framework to plan, build and deploy a virtual desktop infrastructure (VDI) to enable innovation, collaboration and operate within academic funding structures. It outlines 6 core components: Security, Ease of Access, Performance, Cost, Tools, and Training. Conclusion: A platform like SeDAP is not simply successful through technical excellence and performance. It’s adoption is dependent on a collaborative environment where researchers and users plan and evaluate the requirements of all aspects. PMID:27683665

Improved Distance Learning Environment For Marine Forces Reserve

DTIC Science & Technology

2016-09-01

keyboard, to 20 form a desktop computer . Laptop computers share similar components but add mobility to the user. If additional desktop computers ...for stationary computing devices such as desktop PCs and laptops include the Microsoft Windows, Mac OS, and Linux families of OSs 44 (Hopkins...opportunities to all Marines. For active duty Marines, government-provided desktops and laptops (GPDLs) typically support DL T&E or learning resource

Novel Software for Performing Leksell Stereotactic Surgery without the Use of Printing Films: Technical Note.

PubMed

Hashizume, Akira; Akimitsu, Tomohide; Iida, Koji; Kagawa, Kota; Katagiri, Masaya; Hanaya, Ryosuke; Arita, Kazunori; Kurisu, Kaoru

2016-01-01

Hospitals in Japan have recently begun to employ the DICOM viewer system on desktop or laptop monitors. However, conventional embedding surgery for deep-brain stimulation with the Leksell stereotactic system (LSS) requires printed X-ray films for defining the coordination, coregistration of actual surgical films with the reference coordinates, and validation of the needle trajectories. While just performing these procedures on desktop or laptop monitors, the authors were able to develop novel software to facilitate complete digital manipulation with the Leksell frame without printing films. In this study, we validated the practical use of LSS, and benefit of this software in the Takanobashi Central Hospital and Kagoshima University Hospital.

Timing Recovery Strategies in Magnetic Recording Systems

NASA Astrophysics Data System (ADS)

Kovintavewat, Piya

At some point in a digital communications receiver, the received analog signal must be sampled. Good performance requires that these samples be taken at the right times. The process of synchronizing the sampler with the received analog waveform is known as timing recovery. Conventional timing recovery techniques perform well only when operating at high signal-to-noise ratio (SNR). Nonetheless, iterative error-control codes allow reliable communication at very low SNR, where conventional techniques fail. This paper provides a detailed review on the timing recovery strategies based on per-survivor processing (PSP) that are capable of working at low SNR. We also investigate their performance in magnetic recording systems because magnetic recording is a primary method of storage for a variety of applications, including desktop, mobile, and server systems. Results indicate that the timing recovery strategies based on PSP perform better than the conventional ones and are thus worth being employed in magnetic recording systems.

The Printout: Desktop Pulishing in the Classroom.

ERIC Educational Resources Information Center

Balajthy, Ernest; Link, Gordon

1988-01-01

Reviews software available to the classroom teacher for desktop publishing and describes specific classroom activities. Suggests using desktop publishing to produce large print texts for students with limited sight or for primary students.(NH)

Desktop Publishing: Changing Technology, Changing Occupations.

ERIC Educational Resources Information Center

Stanton, Michael

1991-01-01

Describes desktop publishing (DTP) and its place in corporations. Lists job titles of those working in desktop publishing and describes DTP as it is taught at secondary and postsecondary levels and by private trainers. (JOW)

Desktop computer graphics for RMS/payload handling flight design

NASA Technical Reports Server (NTRS)

Homan, D. J.

1984-01-01

A computer program, the Multi-Adaptive Drawings, Renderings and Similitudes (MADRAS) program, is discussed. The modeling program, written for a desktop computer system (the Hewlett-Packard 9845/C), is written in BASIC and uses modular construction of objects while generating both wire-frame and hidden-line drawings from any viewpoint. The dimensions and placement of objects are user definable. Once the hidden-line calculations are made for a particular viewpoint, the viewpoint may be rotated in pan, tilt, and roll without further hidden-line calculations. The use and results of this program are discussed.

D Virtual CH Interactive Information Systems for a Smart Web Browsing Experience for Desktop Pcs and Mobile Devices

NASA Astrophysics Data System (ADS)

Scianna, A.; La Guardia, M.

2018-05-01

Recently, the diffusion of knowledge on Cultural Heritage (CH) has become an element of primary importance for its valorization. At the same time, the diffusion of surveys based on UAV Unmanned Aerial Vehicles (UAV) technologies and new methods of photogrammetric reconstruction have opened new possibilities for 3D CH representation. Furthermore the recent development of faster and more stable internet connections leads people to increase the use of mobile devices. In the light of all this, the importance of the development of Virtual Reality (VR) environments applied to CH is strategic for the diffusion of knowledge in a smart solution. In particular, the present work shows how, starting from a basic survey and the further photogrammetric reconstruction of a cultural good, is possible to built a 3D CH interactive information system useful for desktop and mobile devices. For this experimentation the Arab-Norman church of the Trinity of Delia (in Castelvetrano-Sicily-Italy) has been adopted as case study. The survey operations have been carried out considering different rapid methods of acquisition (UAV camera, SLR camera and smartphone camera). The web platform to publish the 3D information has been built using HTML5 markup language and WebGL JavaScript libraries (Three.js libraries). This work presents the construction of a 3D navigation system for a web-browsing of a virtual CH environment, with the integration of first person controls and 3D popup links. This contribution adds a further step to enrich the possibilities of open-source technologies applied to the world of CH valorization on web.

Combining data from multiple sources using the CUAHSI Hydrologic Information System

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Ames, D. P.; Horsburgh, J. S.; Goodall, J. L.

2012-12-01

The Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI) has developed a Hydrologic Information System (HIS) to provide better access to data by enabling the publication, cataloging, discovery, retrieval, and analysis of hydrologic data using web services. The CUAHSI HIS is an Internet based system comprised of hydrologic databases and servers connected through web services as well as software for data publication, discovery and access. The HIS metadata catalog lists close to 100 web services registered to provide data through this system, ranging from large federal agency data sets to experimental watersheds managed by University investigators. The system's flexibility in storing and enabling public access to similarly formatted data and metadata has created a community data resource from governmental and academic data that might otherwise remain private or analyzed only in isolation. Comprehensive understanding of hydrology requires integration of this information from multiple sources. HydroDesktop is the client application developed as part of HIS to support data discovery and access through this system. HydroDesktop is founded on an open source GIS client and has a plug-in architecture that has enabled the integration of modeling and analysis capability with the functionality for data discovery and access. Model integration is possible through a plug-in built on the OpenMI standard and data visualization and analysis is supported by an R plug-in. This presentation will demonstrate HydroDesktop, showing how it provides an analysis environment within which data from multiple sources can be discovered, accessed and integrated.

NASA's Climate in a Box: Desktop Supercomputing for Open Scientific Model Development

NASA Astrophysics Data System (ADS)

Wojcik, G. S.; Seablom, M. S.; Lee, T. J.; McConaughy, G. R.; Syed, R.; Oloso, A.; Kemp, E. M.; Greenseid, J.; Smith, R.

2009-12-01

NASA's High Performance Computing Portfolio in cooperation with its Modeling, Analysis, and Prediction program intends to make its climate and earth science models more accessible to a larger community. A key goal of this effort is to open the model development and validation process to the scientific community at large such that a natural selection process is enabled and results in a more efficient scientific process. One obstacle to others using NASA models is the complexity of the models and the difficulty in learning how to use them. This situation applies not only to scientists who regularly use these models but also non-typical users who may want to use the models such as scientists from different domains, policy makers, and teachers. Another obstacle to the use of these models is that access to high performance computing (HPC) accounts, from which the models are implemented, can be restrictive with long wait times in job queues and delays caused by an arduous process of obtaining an account, especially for foreign nationals. This project explores the utility of using desktop supercomputers in providing a complete ready-to-use toolkit of climate research products to investigators and on demand access to an HPC system. One objective of this work is to pre-package NASA and NOAA models so that new users will not have to spend significant time porting the models. In addition, the prepackaged toolkit will include tools, such as workflow, visualization, social networking web sites, and analysis tools, to assist users in running the models and analyzing the data. The system architecture to be developed will allow for automatic code updates for each user and an effective means with which to deal with data that are generated. We plan to investigate several desktop systems, but our work to date has focused on a Cray CX1. Currently, we are investigating the potential capabilities of several non-traditional development environments. While most NASA and NOAA models are designed for Linux operating systems (OS), the arrival of the WindowsHPC 2008 OS provides the opportunity to evaluate the use of a new platform on which to develop and port climate and earth science models. In particular, we are evaluating Microsoft's Visual Studio Integrated Developer Environment to determine its appropriateness for the climate modeling community. In the initial phases of this project, we have ported GEOS-5, WRF, GISS ModelE, and GFS to Linux on a CX1 and are in the process of porting WRF and ModelE to WindowsHPC 2008. Initial tests on the CX1 Linux OS indicate favorable comparisons in terms of performance and consistency of scientific results when compared with experiments executed on NASA high end systems. As in the past, NASA's large clusters will continue to be an important part of our objectives. We envision a seamless environment in which an investigator performs model development and testing on a desktop system and can seamlessly transfer execution to supercomputer clusters for production.

Visualizing NetCDF Files by Using the EverVIEW Data Viewer

USGS Publications Warehouse

Conzelmann, Craig; Romañach, Stephanie S.

2010-01-01

Over the past few years, modelers in South Florida have started using Network Common Data Form (NetCDF) as the standard data container format for storing hydrologic and ecologic modeling inputs and outputs. With its origins in the meteorological discipline, NetCDF was created by the Unidata Program Center at the University Corporation for Atmospheric Research, in conjunction with the National Aeronautics and Space Administration and other organizations. NetCDF is a portable, scalable, self-describing, binary file format optimized for storing array-based scientific data. Despite attributes which make NetCDF desirable to the modeling community, many natural resource managers have few desktop software packages which can consume NetCDF and unlock the valuable data contained within. The U.S. Geological Survey and the Joint Ecosystem Modeling group, an ecological modeling community of practice, are working to address this need with the EverVIEW Data Viewer. Available for several operating systems, this desktop software currently supports graphical displays of NetCDF data as spatial overlays on a three-dimensional globe and views of grid-cell values in tabular form. An included Open Geospatial Consortium compliant, Web-mapping service client and charting interface allows the user to view Web-available spatial data as additional map overlays and provides simple charting visualizations of NetCDF grid values.

Promises and Realities of Desktop Publishing.

ERIC Educational Resources Information Center

Thompson, Patricia A.; Craig, Robert L.

1991-01-01

Examines the underlying assumptions of the rhetoric of desktop publishing promoters. Suggests four criteria to help educators provide insights into issues and challenges concerning desktop publishing technology that design students will face on the job. (MG)

Making the Leap to Desktop Publishing.

ERIC Educational Resources Information Center

Schleifer, Neal

1986-01-01

Describes one teacher's approach to desktop publishing. Explains how the Macintosh and LaserWriter were used in the publication of a school newspaper. Guidelines are offered to teachers for the establishment of a desktop publishing lab. (ML)

Migrating EO/IR sensors to cloud-based infrastructure as service architectures

NASA Astrophysics Data System (ADS)

Berglie, Stephen T.; Webster, Steven; May, Christopher M.

2014-06-01

The Night Vision Image Generator (NVIG), a product of US Army RDECOM CERDEC NVESD, is a visualization tool used widely throughout Army simulation environments to provide fully attributed synthesized, full motion video using physics-based sensor and environmental effects. The NVIG relies heavily on contemporary hardware-based acceleration and GPU processing techniques, which push the envelope of both enterprise and commodity-level hypervisor support for providing virtual machines with direct access to hardware resources. The NVIG has successfully been integrated into fully virtual environments where system architectures leverage cloudbased technologies to various extents in order to streamline infrastructure and service management. This paper details the challenges presented to engineers seeking to migrate GPU-bound processes, such as the NVIG, to virtual machines and, ultimately, Cloud-Based IAS architectures. In addition, it presents the path that led to success for the NVIG. A brief overview of Cloud-Based infrastructure management tool sets is provided, and several virtual desktop solutions are outlined. A discrimination is made between general purpose virtual desktop technologies compared to technologies that expose GPU-specific capabilities, including direct rendering and hard ware-based video encoding. Candidate hypervisor/virtual machine configurations that nominally satisfy the virtualized hardware-level GPU requirements of the NVIG are presented , and each is subsequently reviewed in light of its implications on higher-level Cloud management techniques. Implementation details are included from the hardware level, through the operating system, to the 3D graphics APls required by the NVIG and similar GPU-bound tools.

The Firegoose: two-way integration of diverse data from different bioinformatics web resources with desktop applications

PubMed Central

Bare, J Christopher; Shannon, Paul T; Schmid, Amy K; Baliga, Nitin S

2007-01-01

Background Information resources on the World Wide Web play an indispensable role in modern biology. But integrating data from multiple sources is often encumbered by the need to reformat data files, convert between naming systems, or perform ongoing maintenance of local copies of public databases. Opportunities for new ways of combining and re-using data are arising as a result of the increasing use of web protocols to transmit structured data. Results The Firegoose, an extension to the Mozilla Firefox web browser, enables data transfer between web sites and desktop tools. As a component of the Gaggle integration framework, Firegoose can also exchange data with Cytoscape, the R statistical package, Multiexperiment Viewer (MeV), and several other popular desktop software tools. Firegoose adds the capability to easily use local data to query KEGG, EMBL STRING, DAVID, and other widely-used bioinformatics web sites. Query results from these web sites can be transferred to desktop tools for further analysis with a few clicks. Firegoose acquires data from the web by screen scraping, microformats, embedded XML, or web services. We define a microformat, which allows structured information compatible with the Gaggle to be embedded in HTML documents. We demonstrate the capabilities of this software by performing an analysis of the genes activated in the microbe Halobacterium salinarum NRC-1 in response to anaerobic environments. Starting with microarray data, we explore functions of differentially expressed genes by combining data from several public web resources and construct an integrated view of the cellular processes involved. Conclusion The Firegoose incorporates Mozilla Firefox into the Gaggle environment and enables interactive sharing of data between diverse web resources and desktop software tools without maintaining local copies. Additional web sites can be incorporated easily into the framework using the scripting platform of the Firefox browser. Performing data integration in the browser allows the excellent search and navigation capabilities of the browser to be used in combination with powerful desktop tools. PMID:18021453

The Firegoose: two-way integration of diverse data from different bioinformatics web resources with desktop applications.

PubMed

Bare, J Christopher; Shannon, Paul T; Schmid, Amy K; Baliga, Nitin S

2007-11-19

Information resources on the World Wide Web play an indispensable role in modern biology. But integrating data from multiple sources is often encumbered by the need to reformat data files, convert between naming systems, or perform ongoing maintenance of local copies of public databases. Opportunities for new ways of combining and re-using data are arising as a result of the increasing use of web protocols to transmit structured data. The Firegoose, an extension to the Mozilla Firefox web browser, enables data transfer between web sites and desktop tools. As a component of the Gaggle integration framework, Firegoose can also exchange data with Cytoscape, the R statistical package, Multiexperiment Viewer (MeV), and several other popular desktop software tools. Firegoose adds the capability to easily use local data to query KEGG, EMBL STRING, DAVID, and other widely-used bioinformatics web sites. Query results from these web sites can be transferred to desktop tools for further analysis with a few clicks. Firegoose acquires data from the web by screen scraping, microformats, embedded XML, or web services. We define a microformat, which allows structured information compatible with the Gaggle to be embedded in HTML documents. We demonstrate the capabilities of this software by performing an analysis of the genes activated in the microbe Halobacterium salinarum NRC-1 in response to anaerobic environments. Starting with microarray data, we explore functions of differentially expressed genes by combining data from several public web resources and construct an integrated view of the cellular processes involved. The Firegoose incorporates Mozilla Firefox into the Gaggle environment and enables interactive sharing of data between diverse web resources and desktop software tools without maintaining local copies. Additional web sites can be incorporated easily into the framework using the scripting platform of the Firefox browser. Performing data integration in the browser allows the excellent search and navigation capabilities of the browser to be used in combination with powerful desktop tools.

Developing open source, self-contained disease surveillance software applications for use in resource-limited settings

PubMed Central

2012-01-01

Background Emerging public health threats often originate in resource-limited countries. In recognition of this fact, the World Health Organization issued revised International Health Regulations in 2005, which call for significantly increased reporting and response capabilities for all signatory nations. Electronic biosurveillance systems can improve the timeliness of public health data collection, aid in the early detection of and response to disease outbreaks, and enhance situational awareness. Methods As components of its Suite for Automated Global bioSurveillance (SAGES) program, The Johns Hopkins University Applied Physics Laboratory developed two open-source, electronic biosurveillance systems for use in resource-limited settings. OpenESSENCE provides web-based data entry, analysis, and reporting. ESSENCE Desktop Edition provides similar capabilities for settings without internet access. Both systems may be configured to collect data using locally available cell phone technologies. Results ESSENCE Desktop Edition has been deployed for two years in the Republic of the Philippines. Local health clinics have rapidly adopted the new technology to provide daily reporting, thus eliminating the two-to-three week data lag of the previous paper-based system. Conclusions OpenESSENCE and ESSENCE Desktop Edition are two open-source software products with the capability of significantly improving disease surveillance in a wide range of resource-limited settings. These products, and other emerging surveillance technologies, can assist resource-limited countries compliance with the revised International Health Regulations. PMID:22950686

Improvement and speed optimization of numerical tsunami modelling program using OpenMP technology

NASA Astrophysics Data System (ADS)

Chernov, A.; Zaytsev, A.; Yalciner, A.; Kurkin, A.

2009-04-01

Currently, the basic problem of tsunami modeling is low speed of calculations which is unacceptable for services of the operative notification. Existing algorithms of numerical modeling of hydrodynamic processes of tsunami waves are developed without taking the opportunities of modern computer facilities. There is an opportunity to have considerable acceleration of process of calculations by using parallel algorithms. We discuss here new approach to parallelization tsunami modeling code using OpenMP Technology (for multiprocessing systems with the general memory). Nowadays, multiprocessing systems are easily accessible for everyone. The cost of the use of such systems becomes much lower comparing to the costs of clusters. This opportunity also benefits all programmers to apply multithreading algorithms on desktop computers of researchers. Other important advantage of the given approach is the mechanism of the general memory - there is no necessity to send data on slow networks (for example Ethernet). All memory is the common for all computing processes; it causes almost linear scalability of the program and processes. In the new version of NAMI DANCE using OpenMP technology and multi-threading algorithm provide 80% gain in speed in comparison with the one-thread version for dual-processor unit. The speed increased and 320% gain was attained for four core processor unit of PCs. Thus, it was possible to reduce considerably time of performance of calculations on the scientific workstations (desktops) without complete change of the program and user interfaces. The further modernization of algorithms of preparation of initial data and processing of results using OpenMP looks reasonable. The final version of NAMI DANCE with the increased computational speed can be used not only for research purposes but also in real time Tsunami Warning Systems.

Advanced Stirling Radioisotope Generator Thermal Power Model in Thermal Desktop SINDA/FLUINT Analyzer

NASA Technical Reports Server (NTRS)

Wang, Xiao-Yen; Fabanich, William A.; Schmitz, Paul C.

2012-01-01

This paper presents a three-dimensional Advanced Stirling Radioisotope Generator (ASRG) thermal power model that was built using the Thermal Desktop SINDA/FLUINT thermal analyzer. The model was correlated with ASRG engineering unit (EU) test data and ASRG flight unit predictions from Lockheed Martin's Ideas TMG thermal model. ASRG performance under (1) ASC hot-end temperatures, (2) ambient temperatures, and (3) years of mission for the general purpose heat source fuel decay was predicted using this model for the flight unit. The results were compared with those reported by Lockheed Martin and showed good agreement. In addition, the model was used to study the performance of the ASRG flight unit for operations on the ground and on the surface of Titan, and the concept of using gold film to reduce thermal loss through insulation was investigated.

EPA Region 8, Memo on Desktop Printer Ink Cartridges Policy & Voluntary Printer Turn-in

EPA Pesticide Factsheets

This memo requests EPA Region 8 users to voluntarily turn-in their desktop printers and notifies users of the Region 8 policy to not provide maintenance or ink and toner cartridges for desktop printers.

MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop

MedlinePlus

... gov/responsivefull.html MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop To use the sharing features ... consistent user experience from a desktop, tablet, or phone. All users, regardless of how they access MedlinePlus, ...

Wormhole: A Powerful Data Mashup

NASA Technical Reports Server (NTRS)

Widen, David

2011-01-01

The mobile platform is quickly becoming the standard way that users interact with online resources. The iOS operating system allows iPhone and iPad users to seamlessly access highly interactive web applications that until recently were only available via a desktop or laptop. Wormhole is an AJAX application implemented as a smart web widget that allows users to easily supplement web pages with data directly from the Instrument Operations Subsystems division (IOS) at JPL. It creates an interactive mashup using a website's core content enhanced by dynamically retrieved image and metadata supplied by IOS using the webification API. Currently, this technology is limited in scope to NASA data; however, it can easily be augmented to serve many other needs. This web widget can be delivered in various ways, including as a bookmarklet. The underlying technology that powers Wormhole also has applications to other divisions while they are running current missions.

Research on tactical information display technology for interactive virtual cockpit

NASA Astrophysics Data System (ADS)

Sun, Zhongyun; Tian, Tao; Su, Feng

2018-04-01

Based on a fact that traditional tactical information display technology suffers from disadvantages of a large number of data to be transferred and low plotting efficiency in an interactive virtual cockpit, a GID protocol-based simulation has been designed. This method dissolves complex tactical information screens into basic plotting units. The indication of plotting units is controlled via the plotting commands, which solves the incompatibility between the tactical information display in traditional simulation and the desktop-based virtual simulation training system. Having been used in desktop systems for helicopters, fighters, and transporters, this method proves to be scientific and reasonable in design and simple and efficient in usage, which exerts a significant value in establishing aviation equipment technology support training products.

Desktop Publishing: A Powerful Tool for Advanced Composition Courses.

ERIC Educational Resources Information Center

Sullivan, Patricia

1988-01-01

Examines the advantages of using desktop publishing in advanced writing classes. Explains how desktop publishing can spur creativity, call attention to the interaction between words and pictures, encourage the social dimensions of computing and composing, and provide students with practical skills. (MM)

AEGIS: A Lightweight Firewall for Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Hossain, Mohammad Sajjad; Raghunathan, Vijay

Firewalls are an essential component in today's networked computing systems (desktops, laptops, and servers) and provide effective protection against a variety of over-the-network security attacks. With the development of technologies such as IPv6 and 6LoWPAN that pave the way for Internet-connected embedded systems and sensor networks, these devices will soon be subject to (and need to be defended against) similar security threats. As a first step, this paper presents Aegis, a lightweight, rule-based firewall for networked embedded systems such as wireless sensor networks. Aegis is based on a semantically rich, yet simple, rule definition language. In addition, Aegis is highly efficient during operation, runs in a transparent manner from running applications, and is easy to maintain. Experimental results obtained using real sensor nodes and cycle-accurate simulations demonstrate that Aegis successfully performs gatekeeping of a sensor node's communication traffic in a flexible manner with minimal overheads.

Wireless energy transfer: Dielectric lens antennas for beam shaping in wireless power-transfer applications

NASA Astrophysics Data System (ADS)

Gonçalves, Ricardo; Carvalho, Nuno B.; Pinho, Pedro

2017-02-01

In the current contest of wireless systems, the last frontier remains the cut of the power cord. In that sense, the interest over wireless energy transfer technologies in the past years has grown exponentially. However, there are still many challenges to be overcome in order to enable wireless energy transfer full potential. One of the focus in the development of such systems is the design of very-high-gain, highly efficient, antennas that can compensate for the propagation loss of radio signals over the air. In this paper, we explore the design and manufacturing process of dielectric lenses, fabricated using a professional-grade desktop 3D printer. Lens antennas are used in order to increase beam efficiency and therefore maximize the efficiency of a wireless power-transfer system operating at microwave frequencies in the Ku band. Measurements of two fabricated prototypes showcase a large directivity, as predicted with simulations. xml:lang="fr"

Software for Simulating Air Traffic

NASA Technical Reports Server (NTRS)

Sridhar, Banavar; Bilimoria, Karl; Grabbe, Shon; Chatterji, Gano; Sheth, Kapil; Mulfinger, Daniel

2006-01-01

Future Air Traffic Management Concepts Evaluation Tool (FACET) is a system of software for performing computational simulations for evaluating advanced concepts of advanced air-traffic management. FACET includes a program that generates a graphical user interface plus programs and databases that implement computational models of weather, airspace, airports, navigation aids, aircraft performance, and aircraft trajectories. Examples of concepts studied by use of FACET include aircraft self-separation for free flight; prediction of air-traffic-controller workload; decision support for direct routing; integration of spacecraft-launch operations into the U.S. national airspace system; and traffic- flow-management using rerouting, metering, and ground delays. Aircraft can be modeled as flying along either flight-plan routes or great-circle routes as they climb, cruise, and descend according to their individual performance models. The FACET software is modular and is written in the Java and C programming languages. The architecture of FACET strikes a balance between flexibility and fidelity; as a consequence, FACET can be used to model systemwide airspace operations over the contiguous U.S., involving as many as 10,000 aircraft, all on a single desktop or laptop computer running any of a variety of operating systems. Two notable applications of FACET include: (1) reroute conformance monitoring algorithms that have been implemented in one of the Federal Aviation Administration s nationally deployed, real-time, operational systems; and (2) the licensing and integration of FACET with the commercially available Flight Explorer, which is an Internet- based, real-time flight-tracking system.

Joint Mobile Network Operations: Routing Design and Quality of Service Configuration

DTIC Science & Technology

2007-09-01

EF service for the desktop VTC application, CU- SeeMe , which uses UDP packets on ports 7648 and 7649. We also might want to provide AF service to...between commanders. In this case, the example application used is CU- SeeMe , which operates through UDP on ports 7648, 7649, or 24032. The required...range 7648 7649 access-list 101 permit udp any any eq 24032 Matches all CU- SeeMe traffic from any host access-list 102 permit udp 192.168.32.0

Using wide area differential GPS to improve total system error for precision flight operations

NASA Astrophysics Data System (ADS)

Alter, Keith Warren

Total System Error (TSE) refers to an aircraft's total deviation from the desired flight path. TSE can be divided into Navigational System Error (NSE), the error attributable to the aircraft's navigation system, and Flight Technical Error (FTE), the error attributable to pilot or autopilot control. Improvement in either NSE or FTE reduces TSE and leads to the capability to fly more precise flight trajectories. The Federal Aviation Administration's Wide Area Augmentation System (WAAS) became operational for non-safety critical applications in 2000 and will become operational for safety critical applications in 2002. This navigation service will provide precise 3-D positioning (demonstrated to better than 5 meters horizontal and vertical accuracy) for civil aircraft in the United States. Perhaps more importantly, this navigation system, which provides continuous operation across large regions, enables new flight instrumentation concepts which allow pilots to fly aircraft significantly more precisely, both for straight and curved flight paths. This research investigates the capabilities of some of these new concepts, including the Highway-In-The Sky (HITS) display, which not only improves FTE but also reduces pilot workload when compared to conventional flight instrumentation. Augmentation to the HITS display, including perspective terrain and terrain alerting, improves pilot situational awareness. Flight test results from demonstrations in Juneau, AK, and Lake Tahoe, CA, provide evidence of the overall feasibility of integrated, low-cost flight navigation systems based on these concepts. These systems, requiring no more computational power than current-generation low-end desktop computers, have immediate applicability to general aviation flight from Cessnas to business jets and can support safer and ultimately more economical flight operations. Commercial airlines may also, over time, benefit from these new technologies.

Speech perception benefits of FM and infrared devices to children with hearing aids in a typical classroom.

PubMed

Anderson, Karen L; Goldstein, Howard

2004-04-01

Children typically learn in classroom environments that have background noise and reverberation that interfere with accurate speech perception. Amplification technology can enhance the speech perception of students who are hard of hearing. This study used a single-subject alternating treatments design to compare the speech recognition abilities of children who are, hard of hearing when they were using hearing aids with each of three frequency modulated (FM) or infrared devices. Eight 9-12-year-olds with mild to severe hearing loss repeated Hearing in Noise Test (HINT) sentence lists under controlled conditions in a typical kindergarten classroom with a background noise level of +10 dB signal-to-noise (S/N) ratio and 1.1 s reverberation time. Participants listened to HINT lists using hearing aids alone and hearing aids in combination with three types of S/N-enhancing devices that are currently used in mainstream classrooms: (a) FM systems linked to personal hearing aids, (b) infrared sound field systems with speakers placed throughout the classroom, and (c) desktop personal sound field FM systems. The infrared ceiling sound field system did not provide benefit beyond that provided by hearing aids alone. Desktop and personal FM systems in combination with personal hearing aids provided substantial improvements in speech recognition. This information can assist in making S/N-enhancing device decisions for students using hearing aids. In a reverberant and noisy classroom setting, classroom sound field devices are not beneficial to speech perception for students with hearing aids, whereas either personal FM or desktop sound field systems provide listening benefits.

Open source OCR framework using mobile devices

NASA Astrophysics Data System (ADS)

Zhou, Steven Zhiying; Gilani, Syed Omer; Winkler, Stefan

2008-02-01

Mobile phones have evolved from passive one-to-one communication device to powerful handheld computing device. Today most new mobile phones are capable of capturing images, recording video, and browsing internet and do much more. Exciting new social applications are emerging on mobile landscape, like, business card readers, sing detectors and translators. These applications help people quickly gather the information in digital format and interpret them without the need of carrying laptops or tablet PCs. However with all these advancements we find very few open source software available for mobile phones. For instance currently there are many open source OCR engines for desktop platform but, to our knowledge, none are available on mobile platform. Keeping this in perspective we propose a complete text detection and recognition system with speech synthesis ability, using existing desktop technology. In this work we developed a complete OCR framework with subsystems from open source desktop community. This includes a popular open source OCR engine named Tesseract for text detection & recognition and Flite speech synthesis module, for adding text-to-speech ability.

Desktop Publishing for the Gifted/Talented.

ERIC Educational Resources Information Center

Hamilton, Wayne

1987-01-01

Examines the nature of desktop publishing and how it can be used in the classroom for gifted/talented students. Characteristics and special needs of such students are identified, and it is argued that desktop publishing addresses those needs, particularly with regard to creativity. Twenty-six references are provided. (MES)

48 CFR 1552.208-70 - Printing.

Code of Federal Regulations, 2010 CFR

2010-10-01

...” (or “camera-ready copy”) is a final document suitable for printing/duplication. “Desktop Publishing... from desktop publishing is being sent to a typesetting device (i.e., Linotronic) with camera copy being... preparing related illustrative material to a final document (camera-ready copy) using desktop publishing. (2...

Impact of workstations on criticality analyses at ABB combustion engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarko, L.B.; Freeman, R.S.; O'Donnell, P.F.

1993-01-01

During 1991, ABB Combustion Engineering (ABB C-E) made the transition from a CDC Cyber 990 mainframe for nuclear criticality safety analyses to Hewlett Packard (HP)/Apollo workstations. The primary motivation for this change was improved economics of the workstation and maintaining state-of-the-art technology. The Cyber 990 utilized the NOS operating system with a 60-bit word size. The CPU memory size was limited to 131 100 words of directly addressable memory with an extended 250000 words available. The Apollo workstation environment at ABB consists of HP/Apollo-9000/400 series desktop units used by most application engineers, networked with HP/Apollo DN10000 platforms that use 32-bitmore » word size and function as the computer servers and network administrative CPUS, providing a virtual memory system.« less

Venus Quadrangle Geological Mapping: Use of Geoscience Data Visualization Systems in Mapping and Training

NASA Technical Reports Server (NTRS)

Head, James W.; Huffman, J. N.; Forsberg, A. S.; Hurwitz, D. M.; Basilevsky, A. T.; Ivanov, M. A.; Dickson, J. L.; Kumar, P. Senthil

2008-01-01

We are currently investigating new technological developments in computer visualization and analysis in order to assess their importance and utility in planetary geological analysis and mapping [1,2]. Last year we reported on the range of technologies available and on our application of these to various problems in planetary mapping [3]. In this contribution we focus on the application of these techniques and tools to Venus geological mapping at the 1:5M quadrangle scale. In our current Venus mapping projects we have utilized and tested the various platforms to understand their capabilities and assess their usefulness in defining units, establishing stratigraphic relationships, mapping structures, reaching consensus on interpretations and producing map products. We are specifically assessing how computer visualization display qualities (e.g., level of immersion, stereoscopic vs. monoscopic viewing, field of view, large vs. small display size, etc.) influence performance on scientific analysis and geological mapping. We have been exploring four different environments: 1) conventional desktops (DT), 2) semi-immersive Fishtank VR (FT) (i.e., a conventional desktop with head-tracked stereo and 6DOF input), 3) tiled wall displays (TW), and 4) fully immersive virtual reality (IVR) (e.g., "Cave Automatic Virtual Environment," or Cave system). Formal studies demonstrate that fully immersive Cave environments are superior to desktop systems for many tasks [e.g., 4].

Desktop Publishing in a PC-Based Environment.

ERIC Educational Resources Information Center

Sims, Harold A.

1987-01-01

Identifies, considers, and interrelates the functionality of hardware, firmware, and software types; discusses the relationship of input and output devices in the PC-based desktop publishing environment; and reports some of what has been experienced in three years of working intensively in/with desktop publishing devices and solutions. (MES)

Template Interfaces for Agile Parallel Data-Intensive Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramakrishnan, Lavanya; Gunter, Daniel; Pastorello, Gilerto Z.

Tigres provides a programming library to compose and execute large-scale data-intensive scientific workflows from desktops to supercomputers. DOE User Facilities and large science collaborations are increasingly generating large enough data sets that it is no longer practical to download them to a desktop to operate on them. They are instead stored at centralized compute and storage resources such as high performance computing (HPC) centers. Analysis of this data requires an ability to run on these facilities, but with current technologies, scaling an analysis to an HPC center and to a large data set is difficult even for experts. Tigres ismore » addressing the challenge of enabling collaborative analysis of DOE Science data through a new concept of reusable "templates" that enable scientists to easily compose, run and manage collaborative computational tasks. These templates define common computation patterns used in analyzing a data set.« less

Lacustrine flow (divers, side scan sonar, hydrogeology, water penetrating radar) used to understand the location of a drowned person

NASA Astrophysics Data System (ADS)

Ruffell, Alastair

2014-05-01

An unusual application of hydrological understanding to a police search is described. The lacustrine search for a missing person provided reports of bottom-water currents in the lake and contradictory indications from cadaver dogs. A hydrological model of the area was developed using pre-existing information from side scan sonar, a desktop hydrogeological study and deployment of water penetrating radar (WPR). These provided a hydrological theory for the initial search involving subaqueous groundwater flow, focused on an area of bedrock surrounded by sediment, on the lake floor. The work shows the value a hydrological explanation has to a police search operation (equally to search and rescue). With hindsight, the desktop study should have preceded the search, allowing better understanding of water conditions. The ultimate reason for lacustrine flow in this location is still not proven, but the hydrological model explained the problems encountered in the initial search.

RighTime: A real time clock correcting program for MS-DOS-based computer systems

NASA Technical Reports Server (NTRS)

Becker, G. Thomas

1993-01-01

A computer program is described which effectively eliminates the misgivings of the DOS system clock in PC/AT-class computers. RighTime is a small, sophisticated memory-resident program that automatically corrects both the DOS system clock and the hardware 'CMOS' real time clock (RTC) in real time. RighTime learns what corrections are required without operator interaction beyond the occasional accurate time set. Both warm (power on) and cool (power off) errors are corrected, usually yielding better than one part per million accuracy in the typical desktop computer with no additional hardware, and RighTime increases the system clock resolution from approximately 0.0549 second to 0.01 second. Program tools are also available which allow visualization of RighTime's actions, verification of its performance, display of its history log, and which provide data for graphing of the system clock behavior. The program has found application in a wide variety of industries, including astronomy, satellite tracking, communications, broadcasting, transportation, public utilities, manufacturing, medicine, and the military.

12 CFR 1732.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... home computer systems of an employee; or (4) Whether the information is active or inactive. (k) Record... (e.g., e-mail, databases, spreadsheets, PowerPoint presentations, electronic reporting systems... information is stored or located, including network servers, desktop or laptop computers and handheld...

Army Communicator. Volume 34, Number 2

DTIC Science & Technology

2009-01-01

tunneled into the NIPRNet traffic. The encryption hides the contents of the SIPRNet data through a process that randomizes the bit patterns...and technologies such as desktop applications, Virtual Private Network, Blackberry support, and the training and troubleshoot- ing of complex computer...to your own Standing Operating Procedure and then contract for services off the backside to a local Strategic Entry Point or tunnel through

LiveWall Operational Evaluation: Seattle Law Enforcement Pilot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barr, Jonathan L.; Burtner, Edwin R.; Stein, Steven L.

2013-10-01

The LiveWall concept envisioned as an outgrowth of the Precision Information Environment (PIE) project allows communications between separate groups using interactive video, audio, and a shared desktop environment; this allows everyone to participate and collaborate in real time, regardless of location. The LiveWall concept provides a virtual window to other locations, where all parties can interact and collaboratively work with each other. This functionality is intended to improve multi-site coordination amongst emergency operations centers (EOC), field operations sites and across organizations and jurisdictions to accommodate communications during routine and emergency events. For the initial LiveWall operational evaluation PNNL partnered withmore » the Seattle Police Department (SPD). This partnership allowed for the creation of an excellent LiveWall test bed specific to law enforcement. This partnership made it possible to test the LiveWall concept with scenarios involving the many facets of the law enforcement work done by SPD. PNNL and SPD agreed that integrating the systems into operations for a real event would be the best test of the technology and give SPD staff greater visibility into the functionality and benefits offered by the LiveWall concept.« less

Los Alamos radiation transport code system on desktop computing platforms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briesmeister, J.F.; Brinkley, F.W.; Clark, B.A.

The Los Alamos Radiation Transport Code System (LARTCS) consists of state-of-the-art Monte Carlo and discrete ordinates transport codes and data libraries. These codes were originally developed many years ago and have undergone continual improvement. With a large initial effort and continued vigilance, the codes are easily portable from one type of hardware to another. The performance of scientific work-stations (SWS) has evolved to the point that such platforms can be used routinely to perform sophisticated radiation transport calculations. As the personal computer (PC) performance approaches that of the SWS, the hardware options for desk-top radiation transport calculations expands considerably. Themore » current status of the radiation transport codes within the LARTCS is described: MCNP, SABRINA, LAHET, ONEDANT, TWODANT, TWOHEX, and ONELD. Specifically, the authors discuss hardware systems on which the codes run and present code performance comparisons for various machines.« less

Compositional Encounters: Evolvement of Secondary Students' Narratives While Making Historical Desktop Documentaries

ERIC Educational Resources Information Center

Schul, James E.

2012-01-01

The increased popularity of desktop documentary making among both teachers and students in history classrooms warrants an examination of its integration into classroom instruction. This multiple case study focused on two secondary students in an AP European History course during a unit that featured desktop documentary making. Employing Cultural…

Desktop Publishing as a Learning Resources Service.

ERIC Educational Resources Information Center

Drake, David

In late 1988, Midland College in Texas implemented a desktop publishing service to produce instructional aids and reduce and complement the workload of the campus print shop. The desktop service was placed in the Media Services Department of the Learning Resource Center (LRC) for three reasons: the LRC was already established as a campus-wide…

Exploring Graphic Design. A Short Course in Desktop Publishing.

ERIC Educational Resources Information Center

Stanley, MLG

This course in desktop publishing contains seven illustrated modules designed to meet the following objectives: (1) use a desktop publishing program to explore advanced topics in graphic design; (2) learn about typography and how to make design decisions on the use of typestyles; (3) learn basic principles in graphic communications and apply them…

78 FR 41873 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... limited to) desktop computers, integrated desktop computers, laptop/notebook/ netbook computers, and... computer, and 65% of U.S. households owning a notebook, laptop, or netbook computer, in 2013.\\4\\ Coverage... recently published studies. In these studies, the average annual energy use for a desktop computer was...

Fast and Sensitive Alignment of Microbial Whole Genome Sequencing Reads to Large Sequence Datasets on a Desktop PC: Application to Metagenomic Datasets and Pathogen Identification

PubMed Central

2014-01-01

Next generation sequencing (NGS) of metagenomic samples is becoming a standard approach to detect individual species or pathogenic strains of microorganisms. Computer programs used in the NGS community have to balance between speed and sensitivity and as a result, species or strain level identification is often inaccurate and low abundance pathogens can sometimes be missed. We have developed Taxoner, an open source, taxon assignment pipeline that includes a fast aligner (e.g. Bowtie2) and a comprehensive DNA sequence database. We tested the program on simulated datasets as well as experimental data from Illumina, IonTorrent, and Roche 454 sequencing platforms. We found that Taxoner performs as well as, and often better than BLAST, but requires two orders of magnitude less running time meaning that it can be run on desktop or laptop computers. Taxoner is slower than the approaches that use small marker databases but is more sensitive due the comprehensive reference database. In addition, it can be easily tuned to specific applications using small tailored databases. When applied to metagenomic datasets, Taxoner can provide a functional summary of the genes mapped and can provide strain level identification. Taxoner is written in C for Linux operating systems. The code and documentation are available for research applications at http://code.google.com/p/taxoner. PMID:25077800

Fast and sensitive alignment of microbial whole genome sequencing reads to large sequence datasets on a desktop PC: application to metagenomic datasets and pathogen identification.

PubMed

Pongor, Lőrinc S; Vera, Roberto; Ligeti, Balázs

2014-01-01

Next generation sequencing (NGS) of metagenomic samples is becoming a standard approach to detect individual species or pathogenic strains of microorganisms. Computer programs used in the NGS community have to balance between speed and sensitivity and as a result, species or strain level identification is often inaccurate and low abundance pathogens can sometimes be missed. We have developed Taxoner, an open source, taxon assignment pipeline that includes a fast aligner (e.g. Bowtie2) and a comprehensive DNA sequence database. We tested the program on simulated datasets as well as experimental data from Illumina, IonTorrent, and Roche 454 sequencing platforms. We found that Taxoner performs as well as, and often better than BLAST, but requires two orders of magnitude less running time meaning that it can be run on desktop or laptop computers. Taxoner is slower than the approaches that use small marker databases but is more sensitive due the comprehensive reference database. In addition, it can be easily tuned to specific applications using small tailored databases. When applied to metagenomic datasets, Taxoner can provide a functional summary of the genes mapped and can provide strain level identification. Taxoner is written in C for Linux operating systems. The code and documentation are available for research applications at http://code.google.com/p/taxoner.

Using component technologies for web based wavelet enhanced mammographic image visualization.

PubMed

Sakellaropoulos, P; Costaridou, L; Panayiotakis, G

2000-01-01

The poor contrast detectability of mammography can be dealt with by domain specific software visualization tools. Remote desktop client access and time performance limitations of a previously reported visualization tool are addressed, aiming at more efficient visualization of mammographic image resources existing in web or PACS image servers. This effort is also motivated by the fact that at present, web browsers do not support domain-specific medical image visualization. To deal with desktop client access the tool was redesigned by exploring component technologies, enabling the integration of stand alone domain specific mammographic image functionality in a web browsing environment (web adaptation). The integration method is based on ActiveX Document Server technology. ActiveX Document is a part of Object Linking and Embedding (OLE) extensible systems object technology, offering new services in existing applications. The standard DICOM 3.0 part 10 compatible image-format specification Papyrus 3.0 is supported, in addition to standard digitization formats such as TIFF. The visualization functionality of the tool has been enhanced by including a fast wavelet transform implementation, which allows for real time wavelet based contrast enhancement and denoising operations. Initial use of the tool with mammograms of various breast structures demonstrated its potential in improving visualization of diagnostic mammographic features. Web adaptation and real time wavelet processing enhance the potential of the previously reported tool in remote diagnosis and education in mammography.

Ada Compiler Validation Summary Report: Certificate Number: 940325S1. 11352 DDC-I DACS Sun SPARC/Solaries to Pentium PM Bare Ada Cross Compiler System, Version 4.6.4 Sun SPARCclassic = Intel Pentium (Operated as Bare Machine) Based in Xpress Desktop (Intel Product Number: XBASE6E4F-B)

DTIC Science & Technology

1994-03-25

Technology Building 225, Room A266 Gait•--eburg, Maryland 20899 U.S.A. Ada Von Ogan~ztionAda Jointt Program Office De & Software David R . Basel...Standards and Technology Building 225, Room A266 Gaithersburg, Maryland 20899 U.S.A. azi Ada Joint Program office Directoz’,’Coputer & Softvare David R ...characters, a bar (" r ) is written in the 16th position and the rest of the characters ame not prined. "* The place of the definition, i.e.. a line

Computational algorithms for simulations in atmospheric optics.

PubMed

Konyaev, P A; Lukin, V P

2016-04-20

A computer simulation technique for atmospheric and adaptive optics based on parallel programing is discussed. A parallel propagation algorithm is designed and a modified spectral-phase method for computer generation of 2D time-variant random fields is developed. Temporal power spectra of Laguerre-Gaussian beam fluctuations are considered as an example to illustrate the applications discussed. Implementation of the proposed algorithms using Intel MKL and IPP libraries and NVIDIA CUDA technology is shown to be very fast and accurate. The hardware system for the computer simulation is an off-the-shelf desktop with an Intel Core i7-4790K CPU operating at a turbo-speed frequency up to 5 GHz and an NVIDIA GeForce GTX-960 graphics accelerator with 1024 1.5 GHz processors.

CUAHSI-HIS: an Internet based system to facilitate public discovery, access, and exploration of different water science data sources

NASA Astrophysics Data System (ADS)

Arrigo, J. S.; Hooper, R. P.; Choi, Y.; Ames, D. P.; Kadlec, J.; Whiteaker, T.

2011-12-01

"Water is everywhere." This sentiment underscores the importance of instilling hydrologic and earth science literacy in educators, students, and the general public, but also presents challenges for water scientists and educators. Scientific data about water is collected and distributed by several different sources, from federal agencies to scientific investigators to citizen scientists. As competition for limited water resources increase, increasing access to and understanding of the wealth of information about the nation's and the world's water will be critical. The CUAHSI-HIS system is a web based system for sharing hydrologic data that can help address this need. HydroDesktop is a free, open source application for finding, getting, analyzing and using hydrologic data from the CUAHSI-HIS system. It works with HydroCatalog which indexes the data to find out what data exists and where it is, and then it retrieves the data from HydroServers where it is stored communicating using WaterOneFlow web services. Currently, there are over 65 services registered in HydroCatalog providing central discovery of water data from several federal and state agencies, university projects, and other sources. HydroDesktop provides a simplified GIS that allows users to incorporate spatial data, and simple analysis tools to facilitate graphing and visualization. HydroDesktop is designed to be useful for a number of different groups of users with a wide variety of needs and skill levels including university faculty, graduate and undergraduate students, K-12 students, engineering and scientific consultants, and others. This presentation will highlight some of the features of HydroDesktop and the CUAHSI-HIS system that make it particularly appropriate for use in educational and public outreach settings, and will present examples of educational use. The incorporation of "real data," localization to an area of interest, and problem-based learning are all recognized as effective strategies for learning. Many example exercises educators create around water may list several websites and data sources (e.g. EPA, USGS, etc.) an educator needs to prepare even a simple exercise. HydroDesktop can simplify this process by providing unified access to several sources. The GIS interface can be used to incorporate local spatial data to allow students to explore environmental factors, and to illustrate concepts, such as watershed delineation. Simple graphing and time series tools can be used to illustrate relationships between different types of data and important water science concepts. CUAHSI is interested in partnering with science PIs to facilitate access to their project data and creating education and outreach materials around them, as well as with educators, public policy professionals and other constituencies to explore how CUAHSI HIS services can be utilized to foster public understanding and consumption of water information.

No Effect of Ambient Odor on the Affective Appraisal of a Desktop Virtual Environment with Signs of Disorder

PubMed Central

Toet, Alexander; van Schaik, Martin; Theunissen, Nicolet C. M.

2013-01-01

Background Desktop virtual environments (VEs) are increasingly deployed to study the effects of environmental qualities and interventions on human behavior and safety related concerns in built environments. For these applications it is essential that users appraise the affective qualities of the VE similar to those of its real world counterpart. Previous studies have shown that factors like simulated lighting, sound and dynamic elements all contribute to the affective appraisal of a desktop VE. Since ambient odor is known to affect the affective appraisal of real environments, and has been shown to increase the sense of presence in immersive VEs, it may also be an effective tool to tune the affective appraisal of desktop VEs. This study investigated if exposure to ambient odor can modulate the affective appraisal of a desktop VE with signs of public disorder. Method Participants explored a desktop VE representing a suburban neighborhood with signs of public disorder (neglect, vandalism and crime), while being exposed to either room air or subliminal levels of unpleasant (tar) or pleasant (cut grass) ambient odor. Whenever they encountered signs of disorder they reported their safety related concerns and associated affective feelings. Results Signs of crime in the desktop VE were associated with negative affective feelings and concerns for personal safety and personal property. However, there was no significant difference between reported safety related concerns and affective connotations in the control (no-odor) and in each of the two ambient odor conditions. Conclusion Ambient odor did not affect safety related concerns and affective connotations associated with signs of disorder in the desktop VE. Thus, semantic congruency between ambient odor and a desktop VE may not be sufficient to influence its affective appraisal, and a more realistic simulation in which simulated objects appear to emit scents may be required to achieve this goal. PMID:24250810

No effect of ambient odor on the affective appraisal of a desktop virtual environment with signs of disorder.

PubMed

Toet, Alexander; van Schaik, Martin; Theunissen, Nicolet C M

2013-01-01

Desktop virtual environments (VEs) are increasingly deployed to study the effects of environmental qualities and interventions on human behavior and safety related concerns in built environments. For these applications it is essential that users appraise the affective qualities of the VE similar to those of its real world counterpart. Previous studies have shown that factors like simulated lighting, sound and dynamic elements all contribute to the affective appraisal of a desktop VE. Since ambient odor is known to affect the affective appraisal of real environments, and has been shown to increase the sense of presence in immersive VEs, it may also be an effective tool to tune the affective appraisal of desktop VEs. This study investigated if exposure to ambient odor can modulate the affective appraisal of a desktop VE with signs of public disorder. Participants explored a desktop VE representing a suburban neighborhood with signs of public disorder (neglect, vandalism and crime), while being exposed to either room air or subliminal levels of unpleasant (tar) or pleasant (cut grass) ambient odor. Whenever they encountered signs of disorder they reported their safety related concerns and associated affective feelings. Signs of crime in the desktop VE were associated with negative affective feelings and concerns for personal safety and personal property. However, there was no significant difference between reported safety related concerns and affective connotations in the control (no-odor) and in each of the two ambient odor conditions. Ambient odor did not affect safety related concerns and affective connotations associated with signs of disorder in the desktop VE. Thus, semantic congruency between ambient odor and a desktop VE may not be sufficient to influence its affective appraisal, and a more realistic simulation in which simulated objects appear to emit scents may be required to achieve this goal.

Teaching Case: MiHotel--Applicant Processing System Design Case

ERIC Educational Resources Information Center

Miller, Robert E.; Dunn, Paul

2018-01-01

This teaching case describes the functionality of an applicant processing system designed for a fictitious hotel chain. The system detailed in the case includes a webform where applicants complete and submit job applications. The system also includes a desktop application used by hotel managers and Human Resources to track applications and process…

The Mobile Agents Integrated Field Test: Mars Desert Research Station April 2003

NASA Technical Reports Server (NTRS)

Clancey, William J.; Sierhuis, Maarten; Alena, Rick; Crawford, Sekou; Dowding, John; Graham, Jeff; Kaskiris, Charis; Tyree, Kim S.; vanHoof, Ron

2003-01-01

The Mobile Agents model-based, distributed architecture, which integrates diverse components in a system for lunar and planetary surface operations, was extensively tested in a two-week field "technology retreat" at the Mars Society s Desert Research Station (MDRS) during April 2003. More than twenty scientists and engineers from three NASA centers and two universities refined and tested the system through a series of incremental scenarios. Agent software, implemented in runtime Brahms, processed GPS, health data, and voice commands-monitoring, controlling and logging science data throughout simulated EVAs with two geologists. Predefined EVA plans, modified on the fly by voice command, enabled the Mobile Agents system to provide navigation and timing advice. Communications were maintained over five wireless nodes distributed over hills and into canyons for 5 km; data, including photographs and status was transmitted automatically to the desktop at mission control in Houston. This paper describes the system configurations, communication protocols, scenarios, and test results.

Running GUI Applications on Peregrine from OSX | High-Performance Computing

Science.gov Websites

Learn how to use Virtual Network Computing to access a Linux graphical desktop environment on Peregrine local port (on, e.g., your laptop), starts a VNC server process that manages a virtual desktop on your virtual desktop. This is persistent, so remember it-you will use this password whenever accessing

Yearbook Production: Yearbook Staffs Can Now "Blame" Strengths, Weaknesses on Computer as They Take More Control of Their Publications.

ERIC Educational Resources Information Center

Hall, H. L.

1988-01-01

Reports on the advantages and disadvantages of desktop publishing, using the Apple Macintosh and "Pagemaker" software, to produce a high school yearbook. Asserts that while desktop publishing may be initially more time consuming for those unfamiliar with computers, desktop publishing gives high school journalism staffs more control over…

Thermo-electrochemical evaluation of lithium-ion batteries for space applications

NASA Astrophysics Data System (ADS)

Walker, W.; Yayathi, S.; Shaw, J.; Ardebili, H.

2015-12-01

Advanced energy storage and power management systems designed through rigorous materials selection, testing and analysis processes are essential to ensuring mission longevity and success for space exploration applications. Comprehensive testing of Boston Power Swing 5300 lithium-ion (Li-ion) cells utilized by the National Aeronautics and Space Administration (NASA) to power humanoid robot Robonaut 2 (R2) is conducted to support the development of a test-correlated Thermal Desktop (TD) Systems Improved Numerical Differencing Analyzer (SINDA) (TD-S) model for evaluation of power system thermal performance. Temperature, current, working voltage and open circuit voltage measurements are taken during nominal charge-discharge operations to provide necessary characterization of the Swing 5300 cells for TD-S model correlation. Building from test data, embedded FORTRAN statements directly simulate Ohmic heat generation of the cells during charge-discharge as a function of surrounding temperature, local cell temperature and state of charge. The unique capability gained by using TD-S is demonstrated by simulating R2 battery thermal performance in example orbital environments for hypothetical extra-vehicular activities (EVA) exterior to a small satellite. Results provide necessary demonstration of this TD-S technique for thermo-electrochemical analysis of Li-ion cells operating in space environments.

75 FR 52394 - Privacy Act of 1974, as Amended

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

... Responsibilities for Maintaining Records About Individuals, dated February 8, 1996. The system notice is published..., DC and Fort Worth, Texas facilities. Desktop PCs are password controlled by users. Retention and...

Narrowing the scope of failure prediction using targeted fault load injection

NASA Astrophysics Data System (ADS)

Jordan, Paul L.; Peterson, Gilbert L.; Lin, Alan C.; Mendenhall, Michael J.; Sellers, Andrew J.

2018-05-01

As society becomes more dependent upon computer systems to perform increasingly critical tasks, ensuring that those systems do not fail becomes increasingly important. Many organizations depend heavily on desktop computers for day-to-day operations. Unfortunately, the software that runs on these computers is written by humans and, as such, is still subject to human error and consequent failure. A natural solution is to use statistical machine learning to predict failure. However, since failure is still a relatively rare event, obtaining labelled training data to train these models is not a trivial task. This work presents new simulated fault-inducing loads that extend the focus of traditional fault injection techniques to predict failure in the Microsoft enterprise authentication service and Apache web server. These new fault loads were successful in creating failure conditions that were identifiable using statistical learning methods, with fewer irrelevant faults being created.

The desktop muon detector: A simple, physics-motivated machine- and electronics-shop project for university students

NASA Astrophysics Data System (ADS)

Axani, S. N.; Conrad, J. M.; Kirby, C.

2017-12-01

This paper describes the construction of a desktop muon detector, an undergraduate-level physics project that develops machine-shop and electronics-shop technical skills. The desktop muon detector is a self-contained apparatus that employs a plastic scintillator as the detection medium and a silicon photomultiplier for light collection. This detector can be battery powered and is used in conjunction with the provided software. The total cost per detector is approximately 100. We describe physics experiments we have performed, and then suggest several other interesting measurements that are possible, with one or more desktop muon detectors.

RadMap

EPA Pesticide Factsheets

RadMap is an interactive desktop tool featuring a nationwide geographic information systems (GIS) map of long-term radiation monitoring locations across the United States with access to key information about the monitor and the area surrounding it.

ISS-CREAM Thermal and Fluid System Design and Analysis

NASA Technical Reports Server (NTRS)

Thorpe, Rosemary S.

2015-01-01

Thermal and Fluids Analysis Workshop (TFAWS), Silver Spring MD NCTS 21070-15. The ISS-CREAM (Cosmic Ray Energetics And Mass for the International Space Station) payload is being developed by an international team and will provide significant cosmic ray characterization over a long time frame. Cold fluid provided by the ISS Exposed Facility (EF) is the primary means of cooling for 5 science instruments and over 7 electronics boxes. Thermal fluid integrated design and analysis was performed for CREAM using a Thermal Desktop model. This presentation will provide some specific design and modeling examples from the fluid cooling system, complex SCD (Silicon Charge Detector) and calorimeter hardware, and integrated payload and ISS level modeling. Features of Thermal Desktop such as CAD simplification, meshing of complex hardware, External References (Xrefs), and FloCAD modeling will be discussed.

3d visualization of atomistic simulations on every desktop

NASA Astrophysics Data System (ADS)

Peled, Dan; Silverman, Amihai; Adler, Joan

2013-08-01

Once upon a time, after making simulations, one had to go to a visualization center with fancy SGI machines to run a GL visualization and make a movie. More recently, OpenGL and its mesa clone have let us create 3D on simple desktops (or laptops), whether or not a Z-buffer card is present. Today, 3D a la Avatar is a commodity technique, presented in cinemas and sold for home TV. However, only a few special research centers have systems large enough for entire classes to view 3D, or special immersive facilities like visualization CAVEs or walls, and not everyone finds 3D immersion easy to view. For maximum physics with minimum effort a 3D system must come to each researcher and student. So how do we create 3D visualization cheaply on every desktop for atomistic simulations? After several months of attempts to select commodity equipment for a whole room system, we selected an approach that goes back a long time, even predating GL. The old concept of anaglyphic stereo relies on two images, slightly displaced, and viewed through colored glasses, or two squares of cellophane from a regular screen/projector or poster. We have added this capability to our AViz atomistic visualization code in its new, 6.1 version, which is RedHat, CentOS and Ubuntu compatible. Examples using data from our own research and that of other groups will be given.

Characterization of ABS specimens produced via the 3D printing technology for drone structural components

NASA Astrophysics Data System (ADS)

Ferro, Carlo Giovanni; Brischetto, Salvatore; Torre, Roberto; Maggiore, Paolo

2016-07-01

The Fused Deposition Modelling (FDM) technology is widely used in rapid prototyping. 3D printers for home desktop applications are usually employed to make non-structural objects. When the mechanical stresses are not excessive, this technology can also be successfully employed to produce structural objects, not only in prototyping stage but also in the realization of series pieces. The innovative idea of the present work is the application of this technology, implemented in a desktop 3D printer, to the realization of components for aeronautical use, especially for unmanned aerial systems. For this purpose, the paper is devoted to the statistical study of the performance of a desktop 3D printer to understand how the process performs and which are the boundary limits of acceptance. Mechanical and geometrical properties of ABS (Acrylonitrile Butadiene Styrene) specimens, such as tensile strength and stiffness, have been evaluated. ASTM638 type specimens have been used. A capability analysis has been applied for both mechanical and dimensional performances. Statistically stable limits have been determined using experimentally collected data.

75 FR 1625 - Privacy Act of 1974; Report of Amended or Altered System; Medical, Health and Billing Records System

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

...., desktop, laptop, handheld or other computer types) containing protected personal identifiers or PHI is... as the National Indian Women's Resource Center, to conduct analytical and evaluation studies. 8... SYSTEM: STORAGE: File folders, ledgers, card files, microfiche, microfilm, computer tapes, disk packs...

[CompuRecord--A perioperative information management-system for anesthesia].

PubMed

Martin, J; Ederle, D; Milewski, P

2002-08-01

Since 1977 procedures for automatic documentation of anesthesias have repeatedly been described. Because of a limited arrangement of the desk top and because of its focussing on intraoperative documentation only a widespread introduction could not be established so far. Todays systems are offered with graphically orientated desktops which can be operated by intuition. The CompuRecord(R)-System (Philips Healthcare) is a perioperative management system for anaesthesia. It is constructed with modular components, recording the complete anaesthesiological care of a patient from preanaesthesiological assessment to the recovery room. Additional modules allow an economical check, provide for quality management and exportation of a core data base. Except for the original software all other components of the system including the net work components are IT standard products allowing reduced costs for supplementation, expansion and support. The advantage of an automatical documentation system of anaesthesia is frequent and detailed recording of anaesthesiological data as well as the possibility of a meticulous calculation of cost for each patient. The anaesthesiologist's time used for documentation is reduced remarkably with a limited and reasonable amount of data to be recorded. This leaves more time of attention for the patient himself. Time necessary for training is kept low with the touch screens of the CompuRecord(R) - System, which can be operated intuitively. Primary to purchase an exact analysis of process and of subsequent costs should be done. Standardized documentation allows to establish Standard Operating Procedures in a department of Anaesthesia. Using the given systems an implementation is possible already today despite restricted resources of man power.

Visual Information for the Desktop, version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

2006-03-29

VZIN integrates visual analytics capabilities into popular desktop tools to aid a user in searching and understanding an information space. VZIN allows users to Drag-Drop-Visualize-Explore-Organize information within tools such as Microsoft Office, Windows Explorer, Excel, and Outlook. VZIN is tailorable to specific client or industry requirements. VZIN follows the desktop metaphors so that advanced analytical capabilities are available with minimal user training.

Operating a wide-area high-availability collaborative remote observing system for classically-scheduled observations at the W. M. Keck Observatory

NASA Astrophysics Data System (ADS)

Kibrick, Robert I.; Wirth, Gregory D.; Allen, Steven L.; Deich, William T. S.; Goodrich, Robert W.; Lanclos, Kyle; Lyke, James E.

2011-03-01

For over a decade, the W. M. Keck Observatory's two 10-meter telescopes have been operated remotely from its Waimea headquarters. Over the last 9 years, WMKO remote observing has expanded to allow observing teams at dedicated sites located across California to observe via the Internet either in collaboration with colleagues in Waimea or entirely from California; this capability was extended to Swinburne University in Melbourne, Australia in 2010 and to Yale University in New Haven, Connecticut in early 2011. All Keck facility science instruments are currently supported. Observers distributed between as many as four sites can collaborate in the interactive operation of each instrument by means of shared VNC desktops and multipoint video and/or telephone conferencing. Automated routers at primary remote observing sites ensure continued connectivity during Internet outages. Each Keck remote observing facility is similarly equipped and configured so observers have the same operating environment. This architecture provides observers the flexibility to conduct observations from the location best suited to their needs and to adapt to last-minute changes. It also enhances the ability of off-site technical staff to provide remote support.

RadMap Installation Instructions

EPA Pesticide Factsheets

RadMap is an interactive desktop tool featuring a nationwide geographic information systems (GIS) map of long-term radiation monitoring locations across the United States with access to key information about the monitor and the area surrounding it.

76 FR 8758 - Privacy Act of 1974; Department of Homeland Security Federal Emergency Management Agency-002...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

... screen activity in the National Emergency Management Information System for both call-related customer... desktop screen as they perform work in National Emergency Management Information System (NEMIS); (3) Avaya...), Enterprise Performance Information Management Section, Federal Emergency Management Agency, Texas National...

Colleges' Effort To Prepare for Y2K May Yield Benefits for Many Years.

ERIC Educational Resources Information Center

Olsen, Florence

2000-01-01

Suggests that the money spent ($100 billion) to fix the Y2K bug in the United States resulted in improved campus computer systems. Reports from campuses around the country indicate that both mainframe and desktop systems experienced fewer problems than expected. (DB)

Free Molecular Heat Transfer Programs for Setup and Dynamic Updating the Conductors in Thermal Desktop

NASA Technical Reports Server (NTRS)

Malroy, Eric T.

2007-01-01

The programs, arrays and logic structure were developed to enable the dynamic update of conductors in thermal desktop. The MatLab program FMHTPRE.m processes the Thermal Desktop conductors and sets up the arrays. The user needs to manually copy portions of the output to different input regions in Thermal Desktop. Also, Fortran subroutines are provided that perform the actual updates to the conductors. The subroutines are setup for helium gas, but the equations can be modified for other gases. The maximum number of free molecular conductors allowed is 10,000 for a given radiation task. Additional radiation tasks for FMHT can be generated to account for more conductors. Modifications to the Fortran subroutines may be warranted, when the mode of heat transfer is in the mixed or continuum mode. The FMHT Thermal Desktop model should be activated by using the "Case Set Manager" once the model is setup. Careful setup of the model is needed to avoid excessive solve times.

Research of Daily Conversation Transmitting System Based on Mouth Part Pattern Recognition

NASA Astrophysics Data System (ADS)

Watanabe, Mutsumi; Nishi, Natsuko

The authors are developing a vision-based intension transfer technique by recognizing user’s face expressions and movements, to help free and convenient communications with aged or disabled persons who find difficulties in talking, discriminating small character prints and operating keyboards by hands and fingers. In this paper we report a prototype system, where layered daily conversations are successively selected by recognizing the transition in shape of user’s mouth parts using camera image sequences settled in front of the user. Four mouth part patterns are used in the system. A method that automatically recognizes these patterns by analyzing the intensity histogram data around the mouth region is newly developed. The confirmation of a selection on the way is executed by detecting the open and shut movements of mouth through the temporal change in intensity histogram data. The method has been installed in a desktop PC by VC++ programs. Experimental results of mouth shape pattern recognition by twenty-five persons have shown the effectiveness of the method.

Moving BASISplus and TECHLIBplus from VAX/VMS to UNIX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dominiak, R.

1993-12-31

BASISplus is used at the Laboratory by the Technical Information Services (TIS) Department which is part of the Information and Publishing Division at ARGONNE. TIS operates the Argonne Information Management System (AIM). The AIM System consists of the ANL Libraries On-Line Database (a TECHLIBplus database), the Current Journals Database (IDI`s current contents search), the ANL Publications Tracking Database (a TECHLIBplus database), the Powder Diffraction File Database, and several CD-ROM databases available through a Novell network. The AIM System is available from the desktop of ANL staff through modem and network connections, as well as from the 10 science libraries atmore » ARGONNE. TIS has been a BASISplus and TECHLIBplus site from the start, and never migrated from BASIS K. The decision to migrate from the VAX/VMS platform to a UNIX platform. Migrating a product from one platform to another involves many decisions and considerations. These justifications, decisions, and considerations are explored in this report.« less

[Conduct of survey four months after the start of EMR for home visits to promote cooperation between hospitals and clinics].

PubMed

Nakagawa, Yumiko; Sawada, Sachiko; Tomiyama, Takashi; Ueda, Yuki; Fujii, Kou; Takeshita, Kiyotaka; Kobayashi, Mitsuru; Isono, Osamu

2014-12-01

Electronic medical records(EMR)for home visits were introduced in October 2013 at our institution in order to ensure smooth cooperation between the hospital and clinic by sharing the details of a patient's medical record. A system was developed for remote desktop connections to the EMR terminal server(virtual server)with the use of an SSL-VPN. Mobile terminals and mobile printers were used. Four months after the start of this system, a survey was conducted for 41 home care professionals and other staff(physicians, nurses, and office staff). Home care staff indicated that they had problems with the system, including bad connections and operating conditions, and difficulties responding to problems when they arose. Other staff indicated that they were able to acquire patient information faster than with paper-based records. Future issues include improvements to the user-friendliness of the terminals and improved responses to problems when they occur.

Mars Propellant Liquefaction and Storage Performance Modeling using Thermal Desktop with an Integrated Cryocooler Model

NASA Technical Reports Server (NTRS)

Desai, Pooja; Hauser, Dan; Sutherlin, Steven

2017-01-01

NASAs current Mars architectures are assuming the production and storage of 23 tons of liquid oxygen on the surface of Mars over a duration of 500+ days. In order to do this in a mass efficient manner, an energy efficient refrigeration system will be required. Based on previous analysis NASA has decided to do all liquefaction in the propulsion vehicle storage tanks. In order to allow for transient Martian environmental effects, a propellant liquefaction and storage system for a Mars Ascent Vehicle (MAV) was modeled using Thermal Desktop. The model consisted of a propellant tank containing a broad area cooling loop heat exchanger integrated with a reverse turbo Brayton cryocooler. Cryocooler sizing and performance modeling was conducted using MAV diurnal heat loads and radiator rejection temperatures predicted from a previous thermal model of the MAV. A system was also sized and modeled using an alternative heat rejection system that relies on a forced convection heat exchanger. Cryocooler mass, input power, and heat rejection for both systems were estimated and compared against sizing based on non-transient sizing estimates.

Mars Propellant Liquefaction Modeling in Thermal Desktop

NASA Technical Reports Server (NTRS)

Desai, Pooja; Hauser, Dan; Sutherlin, Steven

2017-01-01

NASAs current Mars architectures are assuming the production and storage of 23 tons of liquid oxygen on the surface of Mars over a duration of 500+ days. In order to do this in a mass efficient manner, an energy efficient refrigeration system will be required. Based on previous analysis NASA has decided to do all liquefaction in the propulsion vehicle storage tanks. In order to allow for transient Martian environmental effects, a propellant liquefaction and storage system for a Mars Ascent Vehicle (MAV) was modeled using Thermal Desktop. The model consisted of a propellant tank containing a broad area cooling loop heat exchanger integrated with a reverse turbo Brayton cryocooler. Cryocooler sizing and performance modeling was conducted using MAV diurnal heat loads and radiator rejection temperatures predicted from a previous thermal model of the MAV. A system was also sized and modeled using an alternative heat rejection system that relies on a forced convection heat exchanger. Cryocooler mass, input power, and heat rejection for both systems were estimated and compared against sizing based on non-transient sizing estimates.

Usability Study of Two Collocated Prototype System Displays

NASA Technical Reports Server (NTRS)

Trujillo, Anna C.

2007-01-01

Currently, most of the displays in control rooms can be categorized as status screens, alerts/procedures screens (or paper), or control screens (where the state of a component is changed by the operator). The primary focus of this line of research is to determine which pieces of information (status, alerts/procedures, and control) should be collocated. Two collocated displays were tested for ease of understanding in an automated desktop survey. This usability study was conducted as a prelude to a larger human-in-the-loop experiment in order to verify that the 2 new collocated displays were easy to learn and usable. The results indicate that while the DC display was preferred and yielded better performance than the MDO display, both collocated displays can be easily learned and used.

Virtualisation Devices for Student Learning: Comparison between Desktop-Based (Oculus Rift) and Mobile-Based (Gear VR) Virtual Reality in Medical and Health Science Education

ERIC Educational Resources Information Center

Moro, Christian; Stromberga, Zane; Stirling, Allan

2017-01-01

Consumer-grade virtual reality has recently become available for both desktop and mobile platforms and may redefine the way that students learn. However, the decision regarding which device to utilise within a curriculum is unclear. Desktop-based VR has considerably higher setup costs involved, whereas mobile-based VR cannot produce the quality of…

78 FR 38952 - Procurement List; Proposed Additions to and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

...: This notice is published pursuant to 41 U.S.C. 8503 (a)(2) and 41 CFR 51-2.3. Its purpose is to provide...: 7510-00-NIB-9832--Portable Desktop Clipboard, 10'' W x 2-3/5'' D x 16'' H, Black. NSN: 7510-00-NIB-9833--Portable Desktop Clipboard, 10'' W x 2-3/5'' D x 16'' H, Blue. NSN: 7510-00-NIB-9851--Portable Desktop...

Increasing Open Source Software Integration on the Department of Defense Unclassified Desktop

DTIC Science & Technology

2008-06-01

free and legal access to the source code grants the user or operating agency considerable power and control . Commercial, off-the-shelf (COTS...COMMAND, CONTROL AND COMMUNICATIONS (C-3)) from the NAVAL POSTGRADUATE SCHOOL June 2008 Author: Steven A. Schearer Approved...Network. This fee also entitles users to unlimited web support with a two-business-day turnaround time. The retail price for a one year, basic

Maximum-Likelihood Estimation With a Contracting-Grid Search Algorithm

PubMed Central

Hesterman, Jacob Y.; Caucci, Luca; Kupinski, Matthew A.; Barrett, Harrison H.; Furenlid, Lars R.

2010-01-01

A fast search algorithm capable of operating in multi-dimensional spaces is introduced. As a sample application, we demonstrate its utility in the 2D and 3D maximum-likelihood position-estimation problem that arises in the processing of PMT signals to derive interaction locations in compact gamma cameras. We demonstrate that the algorithm can be parallelized in pipelines, and thereby efficiently implemented in specialized hardware, such as field-programmable gate arrays (FPGAs). A 2D implementation of the algorithm is achieved in Cell/BE processors, resulting in processing speeds above one million events per second, which is a 20× increase in speed over a conventional desktop machine. Graphics processing units (GPUs) are used for a 3D application of the algorithm, resulting in processing speeds of nearly 250,000 events per second which is a 250× increase in speed over a conventional desktop machine. These implementations indicate the viability of the algorithm for use in real-time imaging applications. PMID:20824155

Porting the AVS/Express scientific visualization software to Cray XT4.

PubMed

Leaver, George W; Turner, Martin J; Perrin, James S; Mummery, Paul M; Withers, Philip J

2011-08-28

Remote scientific visualization, where rendering services are provided by larger scale systems than are available on the desktop, is becoming increasingly important as dataset sizes increase beyond the capabilities of desktop workstations. Uptake of such services relies on access to suitable visualization applications and the ability to view the resulting visualization in a convenient form. We consider five rules from the e-Science community to meet these goals with the porting of a commercial visualization package to a large-scale system. The application uses message-passing interface (MPI) to distribute data among data processing and rendering processes. The use of MPI in such an interactive application is not compatible with restrictions imposed by the Cray system being considered. We present details, and performance analysis, of a new MPI proxy method that allows the application to run within the Cray environment yet still support MPI communication required by the application. Example use cases from materials science are considered.

Multimedia in the Classroom.

ERIC Educational Resources Information Center

Haight, Richard C.

1990-01-01

The Soapbox system, which allows a presenter to control a multimedia presentation from the touchscreen located on the lectern, is described. The Soapbox allows the integration of slides, videodiscs, desktop publishing, electronic blackboards, video players, and the room lights. (KR)

Improvement on Main/backup Controller Switching Device of the Nozzle Throat Area Control System for a Turbofan Aero Engine

NASA Astrophysics Data System (ADS)

Li, Jie; Duan, Minghu; Yan, Maode; Li, Gang; Li, Xiaohui

2014-06-01

A full authority digital electronic controller (FADEC) equipped with a full authority hydro-mechanical backup controller (FAHMBC) is adopted as the nozzle throat area control system (NTACS) of a turbofan aero engine. In order to ensure the switching reliability of the main/backup controller, the nozzle throat area control switching valve was improved from three-way convex desktop slide valve to six-way convex desktop slide valve. Simulation results show that, if malfunctions of FAEDC occur and abnormal signals are outputted from FADEC, NTACS will be seriously influenced by the main/backup controller switching in several working states, while NTACS will not be influenced by using the improved nozzle throat area control switching valve, thus the controller switching process will become safer and smoother and the working reliability of this turbofan aero engine is improved by the controller switching device improvement.

National Water-Quality Assessment (NAWQA) area-characterization toolbox

USGS Publications Warehouse

Price, Curtis V.; Nakagaki, Naomi; Hitt, Kerie J.

2010-01-01

This is release 1.0 of the National Water-Quality Assessment (NAWQA) Area-Characterization Toolbox. These tools are designed to be accessed using ArcGIS Desktop software (versions 9.3 and 9.3.1). The toolbox is composed of a collection of custom tools that implement geographic information system (GIS) techniques used by the NAWQA Program to characterize aquifer areas, drainage basins, and sampled wells. These tools are built on top of standard functionality included in ArcGIS Desktop running at the ArcInfo license level. Most of the tools require a license for the ArcGIS Spatial Analyst extension. ArcGIS is a commercial GIS software system produced by ESRI, Inc. (http://www.esri.com). The NAWQA Area-Characterization Toolbox is not supported by ESRI, Inc. or its technical support staff. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

The Master Hearing Aid

PubMed Central

Curran, James R.

2013-01-01

As early as the 1930s the term Master Hearing Aid (MHA) described a device used in the fitting of hearing aids. In their original form, the MHA was a desktop system that allowed for simulated or actual adjustment of hearing aid components that resulted in a changed hearing aid response. Over the years the MHA saw many embodiments and contributed to a number of rationales for the fitting of hearing aids. During these same years, the MHA was viewed by many as an inappropriate means of demonstrating hearing aids; the audio quality of the desktop systems was often superior to the hearing aids themselves. These opinions and the evolution of the MHA have molded the modern perception of hearing aids and the techniques used in the fitting of hearing aids. This article reports on a history of the MHA and its influence on the fitting of hearing aids. PMID:23686682

Classifier dependent feature preprocessing methods

NASA Astrophysics Data System (ADS)

Rodriguez, Benjamin M., II; Peterson, Gilbert L.

2008-04-01

In mobile applications, computational complexity is an issue that limits sophisticated algorithms from being implemented on these devices. This paper provides an initial solution to applying pattern recognition systems on mobile devices by combining existing preprocessing algorithms for recognition. In pattern recognition systems, it is essential to properly apply feature preprocessing tools prior to training classification models in an attempt to reduce computational complexity and improve the overall classification accuracy. The feature preprocessing tools extended for the mobile environment are feature ranking, feature extraction, data preparation and outlier removal. Most desktop systems today are capable of processing a majority of the available classification algorithms without concern of processing while the same is not true on mobile platforms. As an application of pattern recognition for mobile devices, the recognition system targets the problem of steganalysis, determining if an image contains hidden information. The measure of performance shows that feature preprocessing increases the overall steganalysis classification accuracy by an average of 22%. The methods in this paper are tested on a workstation and a Nokia 6620 (Symbian operating system) camera phone with similar results.

A framework for interactive visualization of digital medical images.

PubMed

Koehring, Andrew; Foo, Jung Leng; Miyano, Go; Lobe, Thom; Winer, Eliot

2008-10-01

The visualization of medical images obtained from scanning techniques such as computed tomography and magnetic resonance imaging is a well-researched field. However, advanced tools and methods to manipulate these data for surgical planning and other tasks have not seen widespread use among medical professionals. Radiologists have begun using more advanced visualization packages on desktop computer systems, but most physicians continue to work with basic two-dimensional grayscale images or not work directly with the data at all. In addition, new display technologies that are in use in other fields have yet to be fully applied in medicine. It is our estimation that usability is the key aspect in keeping this new technology from being more widely used by the medical community at large. Therefore, we have a software and hardware framework that not only make use of advanced visualization techniques, but also feature powerful, yet simple-to-use, interfaces. A virtual reality system was created to display volume-rendered medical models in three dimensions. It was designed to run in many configurations, from a large cluster of machines powering a multiwalled display down to a single desktop computer. An augmented reality system was also created for, literally, hands-on interaction when viewing models of medical data. Last, a desktop application was designed to provide a simple visualization tool, which can be run on nearly any computer at a user's disposal. This research is directed toward improving the capabilities of medical professionals in the tasks of preoperative planning, surgical training, diagnostic assistance, and patient education.

Accelerating Monte Carlo simulations with an NVIDIA ® graphics processor

NASA Astrophysics Data System (ADS)

Martinsen, Paul; Blaschke, Johannes; Künnemeyer, Rainer; Jordan, Robert

2009-10-01

Modern graphics cards, commonly used in desktop computers, have evolved beyond a simple interface between processor and display to incorporate sophisticated calculation engines that can be applied to general purpose computing. The Monte Carlo algorithm for modelling photon transport in turbid media has been implemented on an NVIDIA ® 8800 GT graphics card using the CUDA toolkit. The Monte Carlo method relies on following the trajectory of millions of photons through the sample, often taking hours or days to complete. The graphics-processor implementation, processing roughly 110 million scattering events per second, was found to run more than 70 times faster than a similar, single-threaded implementation on a 2.67 GHz desktop computer. Program summaryProgram title: Phoogle-C/Phoogle-G Catalogue identifier: AEEB_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEB_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 51 264 No. of bytes in distributed program, including test data, etc.: 2 238 805 Distribution format: tar.gz Programming language: C++ Computer: Designed for Intel PCs. Phoogle-G requires a NVIDIA graphics card with support for CUDA 1.1 Operating system: Windows XP Has the code been vectorised or parallelized?: Phoogle-G is written for SIMD architectures RAM: 1 GB Classification: 21.1 External routines: Charles Karney Random number library. Microsoft Foundation Class library. NVIDA CUDA library [1]. Nature of problem: The Monte Carlo technique is an effective algorithm for exploring the propagation of light in turbid media. However, accurate results require tracing the path of many photons within the media. The independence of photons naturally lends the Monte Carlo technique to implementation on parallel architectures. Generally, parallel computing can be expensive, but recent advances in consumer grade graphics cards have opened the possibility of high-performance desktop parallel-computing. Solution method: In this pair of programmes we have implemented the Monte Carlo algorithm described by Prahl et al. [2] for photon transport in infinite scattering media to compare the performance of two readily accessible architectures: a standard desktop PC and a consumer grade graphics card from NVIDIA. Restrictions: The graphics card implementation uses single precision floating point numbers for all calculations. Only photon transport from an isotropic point-source is supported. The graphics-card version has no user interface. The simulation parameters must be set in the source code. The desktop version has a simple user interface; however some properties can only be accessed through an ActiveX client (such as Matlab). Additional comments: The random number library used has a LGPL ( http://www.gnu.org/copyleft/lesser.html) licence. Running time: Runtime can range from minutes to months depending on the number of photons simulated and the optical properties of the medium. References:http://www.nvidia.com/object/cuda_home.html. S. Prahl, M. Keijzer, Sl. Jacques, A. Welch, SPIE Institute Series 5 (1989) 102.

Hands in space: gesture interaction with augmented-reality interfaces.

PubMed

Billinghurst, Mark; Piumsomboon, Tham; Huidong Bai

2014-01-01

Researchers at the Human Interface Technology Laboratory New Zealand (HIT Lab NZ) are investigating free-hand gestures for natural interaction with augmented-reality interfaces. They've applied the results to systems for desktop computers and mobile devices.

The Printout: Computers and Reading in the United Kingdom.

ERIC Educational Resources Information Center

Ewing, James M.

1988-01-01

Offers an overview of some reading and language arts computer projects in the United Kingdom, including language teaching and intelligent knowledge-based systems, assessment of written style by computer, and desktop publishing in the primary school. (ARH)

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

48 CFR 3439.703 - Federal desktop core configuration (FDCC) compatibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF EDUCATION ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Department Requirements for Acquisition of Information Technology 3439.703 Federal desktop core...

Feedback about Astronomical Application Developments for Mobile Devices

NASA Astrophysics Data System (ADS)

Schaaff, A.; Boch, T.; Fernique, P.; Houpin, R.; Kaestlé, V.; Royer, M.; Scheffmann, J.; Weiler, A.

2013-10-01

Within a few years, Smartphones have become the standard for mobile telephony, and we are now witnessing a rapid development of Internet tablets. These mobile devices have enough powerful hardware features to run more and more complex applications. In the field of astronomy it is not only possible to use these tools to access data via a simple browser, but also to develop native applications reusing libraries (Java for Android, Objective-C for iOS) developed for desktops. We have been working for two years on mobile application development and we now have the skills in native iOS and Android development, Web development (especially HTML5, JavaScript, CSS3) and conversion tools (PhoneGap) from Web development to native applications. The biggest change comes from human/computer interaction that is radically changed by the use of multitouch. This interaction requires a redesign of interfaces to take advantage of new features (simultaneous selections in different parts of the screen, etc.). In the case of native applications, the distribution is usually done through online stores (App Store, Google Play, etc.) which gives visibility to a wider audience. Our approach is not only to perform testing of materials and developing of prototypes, but also operational applications. The native application development is costly in development time, but the possibilities are broader because it is possible to use native hardware such as the gyroscope and the accelerometer, to point out an object in the sky. Development depends on the Web browser and the rendering and performance are often very different between different browsers. It is also possible to convert Web developments to native applications, but currently it is better to restrict this possibility to light applications in terms of functionality. Developments in HTML5 are promising but are far behind those available on desktops. HTML5 has the advantage of allowing development independent from the evolution of the mobile platforms (“write once, run everywhere”). The upcoming Windows 8 support on desktops and Internet tablets as well as a mobile version for smartphones will further expand the native systems family. This will enhance the interest of Web development.

Stress echocardiography with smartphone: real-time remote reading for regional wall motion.

PubMed

Scali, Maria Chiara; de Azevedo Bellagamba, Clarissa Carmona; Ciampi, Quirino; Simova, Iana; de Castro E Silva Pretto, José Luis; Djordjevic-Dikic, Ana; Dodi, Claudio; Cortigiani, Lauro; Zagatina, Angela; Trambaiolo, Paolo; Torres, Marco R; Citro, Rodolfo; Colonna, Paolo; Paterni, Marco; Picano, Eugenio

2017-11-01

The diffusion of smart-phones offers access to the best remote expertise in stress echo (SE). To evaluate the reliability of SE based on smart-phone filming and reading. A set of 20 SE video-clips were read in random sequence with a multiple choice six-answer test by ten readers from five different countries (Italy, Brazil, Serbia, Bulgaria, Russia) of the "SE2020" study network. The gold standard to assess accuracy was a core-lab expert reader in agreement with angiographic verification (0 = wrong, 1 = right). The same set of 20 SE studies were read, in random order and >2 months apart, on desktop Workstation and via smartphones by ten remote readers. Image quality was graded from 1 = poor but readable, to 3 = excellent. Kappa (k) statistics was used to assess intra- and inter-observer agreement. The image quality was comparable in desktop workstation vs. smartphone (2.0 ± 0.5 vs. 2.4 ± 0.7, p = NS). The average reading time per case was similar for desktop versus smartphone (90 ± 39 vs. 82 ± 54 s, p = NS). The overall diagnostic accuracy of the ten readers was similar for desktop workstation vs. smartphone (84 vs. 91%, p = NS). Intra-observer agreement (desktop vs. smartphone) was good (k = 0.81 ± 0.14). Inter-observer agreement was good and similar via desktop or smartphone (k = 0.69 vs. k = 0.72, p = NS). The diagnostic accuracy and consistency of SE reading among certified readers was high and similar via desktop workstation or via smartphone.

Utilization of KSC Present Broadband Communications Data System for Digital Video Services

NASA Technical Reports Server (NTRS)

Andrawis, Alfred S.

2002-01-01

This report covers a visibility study of utilizing present KSC broadband communications data system (BCDS) for digital video services. Digital video services include compressed digital TV delivery and video-on-demand. Furthermore, the study examines the possibility of providing interactive video on demand to desktop personal computers via KSC computer network.

From Virtual Environments to Physical Environments: Exploring Interactivity in Ubiquitous-Learning Systems

ERIC Educational Resources Information Center

Peng, Hsinyi; Chou, Chien; Chang, Chun-Yu

2008-01-01

Computing devices and applications are now used beyond the desktop, in diverse environments, and this trend toward ubiquitous computing is evolving. In this study, we re-visit the interactivity concept and its applications for interactive function design in a ubiquitous-learning system (ULS). Further, we compare interactivity dimensions and…

Utilization of KSC Present Broadband Communications Data System For Digital Video Services

NASA Technical Reports Server (NTRS)

Andrawis, Alfred S.

2001-01-01

This report covers a visibility study of utilizing present KSC broadband communications data system (BCDS) for digital video services. Digital video services include compressed digital TV delivery and video-on-demand. Furthermore, the study examines the possibility of providing interactive video on demand to desktop personal computers via KSC computer network.

Electronic document distribution: Design of the anonymous FTP Langley Technical Report Server

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Gottlich, Gretchen L.

1994-01-01

An experimental electronic dissemination project, the Langley Technical Report Server (LTRS), has been undertaken to determine the feasibility of delivering Langley technical reports directly to the desktops of researchers worldwide. During the first six months, over 4700 accesses occurred and over 2400 technical reports were distributed. This usage indicates the high level of interest that researchers have in performing literature searches and retrieving technical reports at their desktops. The initial system was developed with existing resources and technology. The reports are stored as files on an inexpensive UNIX workstation and are accessible over the Internet. This project will serve as a foundation for ongoing projects at other NASA centers that will allow for greater access to NASA technical reports.

Micro-video display with ocular tracking and interactive voice control

NASA Technical Reports Server (NTRS)

Miller, James E.

1993-01-01

In certain space-restricted environments, many of the benefits resulting from computer technology have been foregone because of the size, weight, inconvenience, and lack of mobility associated with existing computer interface devices. Accordingly, an effort to develop a highly miniaturized and 'wearable' computer display and control interface device, referred to as the Sensory Integrated Data Interface (SIDI), is underway. The system incorporates a micro-video display that provides data display and ocular tracking on a lightweight headset. Software commands are implemented by conjunctive eye movement and voice commands of the operator. In this initial prototyping effort, various 'off-the-shelf' components have been integrated into a desktop computer and with a customized menu-tree software application to demonstrate feasibility and conceptual capabilities. When fully developed as a customized system, the interface device will allow mobile, 'hand-free' operation of portable computer equipment. It will thus allow integration of information technology applications into those restrictive environments, both military and industrial, that have not yet taken advantage of the computer revolution. This effort is Phase 1 of Small Business Innovative Research (SBIR) Topic number N90-331 sponsored by the Naval Undersea Warfare Center Division, Newport. The prime contractor is Foster-Miller, Inc. of Waltham, MA.

Geophysical data analysis and visualization using the Grid Analysis and Display System

NASA Technical Reports Server (NTRS)

Doty, Brian E.; Kinter, James L., III

1995-01-01

Several problems posed by the rapidly growing volume of geophysical data are described, and a selected set of existing solutions to these problems is outlined. A recently developed desktop software tool called the Grid Analysis and Display System (GrADS) is presented. The GrADS' user interface is a natural extension of the standard procedures scientists apply to their geophysical data analysis problems. The basic GrADS operations have defaults that naturally map to data analysis actions, and there is a programmable interface for customizing data access and manipulation. The fundamental concept of the GrADS' dimension environment, which defines both the space in which the geophysical data reside and the 'slice' of data which is being analyzed at a given time, is expressed The GrADS' data storage and access model is described. An argument is made in favor of describable data formats rather than standard data formats. The manner in which GrADS users may perform operations on their data and display the results is also described. It is argued that two-dimensional graphics provides a powerful quantitative data analysis tool whose value is underestimated in the current development environment which emphasizes three dimensional structure modeling.

Loglines. May-June 2013

DTIC Science & Technology

2013-06-01

Design: Paul Henry Crank Writers: Beth Reece Sara Moore Amanda Neumann Lally Laksbergs Loglines is prepared electronically, using desktop publishing...just what we used to call ‘part chasers,’” said Andrew Drake, DLA Pacific Logistics Operations Center deputy chief. WSRs and LNOs have to know the...sometimes the services don’t know what details they need to share with us in order for us to better meet their requirements,” he added. Exercise support

Navy/Marine Corps Manager’s Desktop Guide for CALS Implementation. 2nd Edition

DTIC Science & Technology

1993-06-30

significant process and productivity that CALS initiatives are providing within the Navy infrastructure. CALS programs are on-line and working in today’s Navy...era of declining budgets, CALS is most important in enhancing logistic support productivity to maintain operations and improve readiness. Our...is to be accomplished through the general adoption of a set of procedures and staridards for the production , access, management, maintenance, and

Desktop Computing Integration Project

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1992-01-01

The Desktop Computing Integration Project for the Human Resources Management Division (HRMD) of LaRC was designed to help division personnel use personal computing resources to perform job tasks. The three goals of the project were to involve HRMD personnel in desktop computing, link mainframe data to desktop capabilities, and to estimate training needs for the division. The project resulted in increased usage of personal computers by Awards specialists, an increased awareness of LaRC resources to help perform tasks, and personal computer output that was used in presentation of information to center personnel. In addition, the necessary skills for HRMD personal computer users were identified. The Awards Office was chosen for the project because of the consistency of their data requests and the desire of employees in that area to use the personal computer.

Designing Communication and Learning Environments.

ERIC Educational Resources Information Center

Gayeski, Diane M., Ed.

Designing and remodeling educational facilities are becoming more complex with options that include computer-based collaboration, classrooms with multimedia podiums, conference centers, and workplaces with desktop communication systems. This book provides a collection of articles that address educational facility design categorized in the…

NASAwide electronic publishing system: Prototype STI electronic document distribution, stage-4 evaluation report

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual frame work, functional description, and technical report server of the STI Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware, and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices, which arc contained in Part 2 of this document, consist of (1) STI EDD Project Plan, (2) Team members, (3) Phasing Schedules, (4) Accessing On-line Reports, and (5) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desktop publishing systems, and technical report servers to be able to provide to NASA's engineers, researchers, scientists, and external users the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

Virtualizing Resources for the Application Services and Framework Team

NASA Technical Reports Server (NTRS)

Varner, Justin T.; Crawford, Linda K.

2010-01-01

Virtualization is an emerging technology that will undoubtedly have a major impact on the future of Information Technology. It allows for the centralization of resources in an enterprise system without the need to make any changes to the host operating system, file system, or registry. In turn, this significantly reduces cost and administration, and provides a much greater level of security, compatibility, and efficiency. This experiment examined the practicality, methodology, challenges, and benefits of implementing the technology for the Launch Control System (LCS), and more specifically the Application Services (AS) group of the National Aeronautics and Space Administration (NASA) at the Kennedy Space Center (KSC). In order to carry out this experiment, I used several tools from the virtualization company known as VMWare; these programs included VMWare ThinApp, VMWare Workstation, and VMWare ACE. Used in conjunction, these utilities provided the engine necessary to virtualize and deploy applications in a desktop environment on any Windows platform available. The results clearly show that virtualization is a viable technology that can, when implemented properly, dramatically cut costs, enhance stability and security, and provide easier management for administrators.

Training Capabilities of Wearable and Desktop Simulator Interfaces

DTIC Science & Technology

2011-11-01

Nausea subscale the Wearable group reported a higher level ( M = 13.42) than both the Desktop group ( M = 3.39, p < .001) and the Control group ( M ...7.69, p = .013). For the Oculomotor subscale, the Wearable group again reported a higher level ( M = 22.50) than both the Desktop group ( M = 6.60, p...001) and the Control group ( M = 11.49, p = .007). For the Disorientation subscale, once again the Wearable group reported a higher level ( M

Assessment of Two Desk-Top Computer Simulations Used to Train Tactical Decision Making (TDM) of Small Unit Infantry Leaders

DTIC Science & Technology

2007-04-01

judgmental self-doubt, depression, and causal uncertainty, tend to take fewer risks, and have lower self-esteem. Results from two studies (Nygren, 2000...U.S. Army Research Institute for the Behavioral and Social Sciences Research Report 1869 Assessment of Two Desk-Top Computer Simulations Used to...SUBTITLE 5a. CONTRACT OR GRANT NUMBER Assessment of Two Desk-Top Computer Simulations Used to Train Tactical Decision Making (TDM) of Small Unit

Design Options for a Desktop Publishing Course.

ERIC Educational Resources Information Center

Mayer, Kenneth R.; Nelson, Sandra J.

1992-01-01

Offers recommendations for development of an undergraduate desktop publishing course. Discusses scholastic level and prerequisites, purpose and objectives, instructional resources and methodology, assignments and evaluation, and a general course outline. (SR)

Airborne Management of Traffic Conflicts in Descent With Arrival Constraints

NASA Technical Reports Server (NTRS)

Doble, Nathan A.; Barhydt, Richard; Krishnamurthy, Karthik

2005-01-01

NASA is studying far-term air traffic management concepts that may increase operational efficiency through a redistribution of decisionmaking authority among airborne and ground-based elements of the air transportation system. One component of this research, En Route Free Maneuvering, allows trained pilots of equipped autonomous aircraft to assume responsibility for traffic separation. Ground-based air traffic controllers would continue to separate traffic unequipped for autonomous operations and would issue flow management constraints to all aircraft. To evaluate En Route Free Maneuvering operations, a human-in-the-loop experiment was jointly conducted by the NASA Ames and Langley Research Centers. In this experiment, test subject pilots used desktop flight simulators to resolve conflicts in cruise and descent, and to adhere to air traffic flow constraints issued by test subject controllers. Simulators at NASA Langley were equipped with a prototype Autonomous Operations Planner (AOP) flight deck toolset to assist pilots with conflict management and constraint compliance tasks. Results from the experiment are presented, focusing specifically on operations during the initial descent into the terminal area. Airborne conflict resolution performance in descent, conformance to traffic flow management constraints, and the effects of conflicting traffic on constraint conformance are all presented. Subjective data from subject pilots are also presented, showing perceived levels of workload, safety, and acceptability of autonomous arrival operations. Finally, potential AOP functionality enhancements are discussed along with suggestions to improve arrival procedures.

Stress Counter-Response Training Via Physiological Self-Regulation During Flight Simulation

NASA Technical Reports Server (NTRS)

Palsson, Olafur S.

2000-01-01

This study provided the first evaluation of a new training concept and technology aimed at training pilots to maintain physiological equilibrium during circumstances in an airplane cockpit. Thirty healthy subjects (16 males and 14 females) between the ages of 18 and 35 were randomized into two study groups, A and B. Subjects participated individually in a sequence of four study sessions. In the first visit, subjects were taught to operate a desktop fighter jet flight simulation program. In the three sessions that followed, subjects in group A were trained to minimize their autonomic deviation from baseline values while operating the desktop flight simulation. This was done by making their skin conductance and hand temperature deviations from baseline impair the functionality of the aircraft controls. Subjects also received auditory and visual cues about their autonomic deviation, and were instructed to keep these within pre-set limits to retain full control of the aircraft. Subjects in group B were subjected to periods of impaired aircraft functionality independent of their physiologic activity, and thus served as a control group. No statistically significant group differences were found in the flight performance scores from the three training sessions, and post-training flight performance scores of the two groups were not different. We conclude that this study did not provide clear support for this training methodology in optimizing pilot performance. However, a number of shortcomings in the current status of this training methodology may account for the lack of demonstrable training benefit to the experimental group. Suggested future modifications for research on this training methodology include: Limiting the amount of instrument impairment resulting from physiological deviations; conducting a greater number of physiological training sessions per subject; using pre-post training performance tests which invoke a greater amount of stress in subjects; and developing a more detailed performance scoring system.

Operative record using intraoperative digital data in neurosurgery.

PubMed

Houkin, K; Kuroda, S; Abe, H

2000-01-01

The purpose of this study was to develop a new method for more efficient and accurate operative records using intra-operative digital data in neurosurgery, including macroscopic procedures and microscopic procedures under an operating microscope. Macroscopic procedures were recorded using a digital camera and microscopic procedures were also recorded using a microdigital camera attached to an operating microscope. Operative records were then recorded digitally and filed in a computer using image retouch software and database base software. The time necessary for editing of the digital data and completing the record was less than 30 minutes. Once these operative records are digitally filed, they are easily transferred and used as database. Using digital operative records along with digital photography, neurosurgeons can document their procedures more accurately and efficiently than by the conventional method (handwriting). A complete digital operative record is not only accurate but also time saving. Construction of a database, data transfer and desktop publishing can be achieved using the intra-operative data, including intra-operative photographs.

Desktop Publishing: The New Wave in Business Education.

ERIC Educational Resources Information Center

Huprich, Violet M.

1989-01-01

Discusses the challenges of teaching desktop publishing (DTP); the industry is in flux with the software packages constantly being updated. Indicates that the demand for those with DTP skills is great. (JOW)

Desktop reference for crash reduction factors

DOT National Transportation Integrated Search

2007-09-01

This Desktop Reference documents the estimates of the crash reduction that might be expected if a specific countermeasure or group of countermeasures is implemented with respect to intersections, roadway departure and other non-intersection crashes, ...

Projectors: The Big Picture

ERIC Educational Resources Information Center

Gamble-Risley, Michelle

2006-01-01

In the past, projection systems were large, heavy, and unwieldy and cost $3,000 to $5,000. Setup was fraught with the challenges of multiple wires plugged into the backs of desktop computers, often causing confusion about what went where. Systems were sometimes so difficult to set up that teachers had to spend pre-class time putting them together.…

Making Choices in the Virtual World: The New Model at United Technologies Information Network.

ERIC Educational Resources Information Center

Gulliford, Bradley

1998-01-01

Describes changes in services of the United Technologies Corporation Information Network from a traditional library system to a virtual system of World Wide Web sites, a document-delivery unit, telephone and e-mail reference, and desktop technical support to provide remote access. Staff time, security, and licensing issues are addressed.…

Designing a Mobile Training System in Rural Areas with Bayesian Factor Models

ERIC Educational Resources Information Center

Omidi Najafabadi, Maryam; Mirdamadi, Seyed Mehdi; Payandeh Najafabadi, Amir Teimour

2014-01-01

The facts that the wireless technologies (1) are more convenient; and (2) need less skill than desktop computers, play a crucial role to decrease digital gap in rural areas. This study employed the Bayesian Confirmatory Factor Analysis (CFA) to design a mobile training system in rural areas of Iran. It categorized challenges, potential, and…

Beacon Editor: Capturing Signal Transduction Pathways Using the Systems Biology Graphical Notation Activity Flow Language.

PubMed

Elmarakeby, Haitham; Arefiyan, Mostafa; Myers, Elijah; Li, Song; Grene, Ruth; Heath, Lenwood S

2017-12-01

The Beacon Editor is a cross-platform desktop application for the creation and modification of signal transduction pathways using the Systems Biology Graphical Notation Activity Flow (SBGN-AF) language. Prompted by biologists' requests for enhancements, the Beacon Editor includes numerous powerful features for the benefit of creation and presentation.

Effect of keyswitch design of desktop and notebook keyboards related to key stiffness and typing force.

PubMed

Bufton, Marcia J; Marklin, Richard W; Nagurka, Mark L; Simoneau, Guy G

2006-08-15

This study aimed to compare and analyse rubber-dome desktop, spring-column desktop and notebook keyboards in terms of key stiffness and fingertip typing force. The spring-column keyboard resulted in the highest mean peak contact force (0.86N), followed by the rubber dome desktop (0.68N) and the notebook (0.59N). All these differences were statistically significant. Likewise, the spring-column keyboard registered the highest fingertip typing force and the notebook keyboard the lowest. A comparison of forces showed the notebook (rubber dome) keyboard had the highest fingertip-to-peak contact force ratio (overstrike force), and the spring-column generated the least excess force (as a ratio of peak contact force). The results of this study could aid in optimizing computer key design that could possibly reduce subject discomfort and fatigue.

ASA24-2016

Cancer.gov

The user interface for all 2016 versions of ASA24, including ASA24-Canada-2016 and ASA24-Australia-2016, employs a responsive design, meaning that these latest versions of the ASA24 system can be used on sm artphones and tablets, in addition to laptops and desktops.

Automated generation of virtual scenarios in driving simulator from highway design data.

DOT National Transportation Integrated Search

2010-09-01

In 2008, the Texas Transportation Institute (TTI) began using a desktop driving simulator made by Realtime : Technologies, Inc. This system comes with a library of different roadway segment types that can be pieced : together to create driving scenar...

48 CFR 23.701 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definitions. 23.701... DRUG-FREE WORKPLACE Contracting for Environmentally Preferable Products and Services 23.701 Definitions. As used in this subpart— Computer monitor means a video display unit used with a computer. Desktop...

Lock It Up! Computer Security.

ERIC Educational Resources Information Center

Wodarz, Nan

1997-01-01

The data contained on desktop computer systems and networks pose security issues for virtually every district. Sensitive information can be protected by educating users, altering the physical layout, using password protection, designating access levels, backing up data, reformatting floppy disks, using antivirus software, and installing encryption…

GIS4schools: custom-made GIS-applications for educational use

NASA Astrophysics Data System (ADS)

Demharter, Timo; Michel, Ulrich

2013-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS [1]. Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

GIS4schools: a new approach in GIS education

NASA Astrophysics Data System (ADS)

Demharter, Timo; Michel, Ulrich

2012-10-01

From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS (KERSKI 2000, SCHLEICHER 2004). Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

Scribl: an HTML5 Canvas-based graphics library for visualizing genomic data over the web.

PubMed

Miller, Chase A; Anthony, Jon; Meyer, Michelle M; Marth, Gabor

2013-02-01

High-throughput biological research requires simultaneous visualization as well as analysis of genomic data, e.g. read alignments, variant calls and genomic annotations. Traditionally, such integrative analysis required desktop applications operating on locally stored data. Many current terabyte-size datasets generated by large public consortia projects, however, are already only feasibly stored at specialist genome analysis centers. As even small laboratories can afford very large datasets, local storage and analysis are becoming increasingly limiting, and it is likely that most such datasets will soon be stored remotely, e.g. in the cloud. These developments will require web-based tools that enable users to access, analyze and view vast remotely stored data with a level of sophistication and interactivity that approximates desktop applications. As rapidly dropping cost enables researchers to collect data intended to answer questions in very specialized contexts, developers must also provide software libraries that empower users to implement customized data analyses and data views for their particular application. Such specialized, yet lightweight, applications would empower scientists to better answer specific biological questions than possible with general-purpose genome browsers currently available. Using recent advances in core web technologies (HTML5), we developed Scribl, a flexible genomic visualization library specifically targeting coordinate-based data such as genomic features, DNA sequence and genetic variants. Scribl simplifies the development of sophisticated web-based graphical tools that approach the dynamism and interactivity of desktop applications. Software is freely available online at http://chmille4.github.com/Scribl/ and is implemented in JavaScript with all modern browsers supported.

Web-client based distributed generalization and geoprocessing

USGS Publications Warehouse

Wolf, E.B.; Howe, K.

2009-01-01

Generalization and geoprocessing operations on geospatial information were once the domain of complex software running on high-performance workstations. Currently, these computationally intensive processes are the domain of desktop applications. Recent efforts have been made to move geoprocessing operations server-side in a distributed, web accessible environment. This paper initiates research into portable client-side generalization and geoprocessing operations as part of a larger effort in user-centered design for the US Geological Survey's The National Map. An implementation of the Ramer-Douglas-Peucker (RDP) line simplification algorithm was created in the open source OpenLayers geoweb client. This algorithm implementation was benchmarked using differing data structures and browser platforms. The implementation and results of the benchmarks are discussed in the general context of client-side geoprocessing. (Abstract).

Adapting an existing visualization application for browser-based deployment: A case study from the Tropical Rainfall Measuring Mission

NASA Astrophysics Data System (ADS)

Kelley, Owen A.

2013-02-01

THOR, the Tool for High-resolution Observation Review, is a data viewer for the Tropical Rainfall Measuring Mission (TRMM) and the upcoming Global Precipitation Measurement (GPM) mission. THOR began as a desktop application, but now it can be accessed with a web browser, making THOR one of the first online tools for visualizing TRMM satellite data (http://pps.gsfc.nasa.gov/thor). In this effort, the reuse of the existing visualization code was maximized and the complexity of new code was minimized by avoiding unnecessary functionality, frameworks, or libraries. The simplicity of this approach makes it potentially attractive to researchers wishing to adapt their visualization applications for online deployment. To enable THOR to run within a web browser, three new pieces of code are written. First, the graphical user interface (GUI) of the desktop application is translated into HTML, JavaScript, and CSS. Second, a simple communication mechanism is developed over HTTP. Third, a virtual GUI is created on the server that interfaces with the image-generating routines of the existing desktop application so that these routines do not need to be modified for online use. While the basic functionality of THOR is now available online, prototyping is ongoing for enhanced 3D imaging and other aspects of both THOR Desktop and THOR Online. Because TRMM data products are complex and periodically reprocessed with improved algorithms, having a tool such as THOR is important to analysts at the Precipitation Processing System where the algorithms are tested and the products generated, stored, and distributed. Researchers also have found THOR useful for taking a first look at individual files before writing their own software to perform specialized calculations and analyses.

Racial/ethnic variation in devices used to access patient portals.

PubMed

Chang, Eva; Blondon, Katherine; Lyles, Courtney R; Jordan, Luesa; Ralston, James D

2018-01-01

We examined racial/ethnic variation in the devices used by patients to access medical records through an online patient portal. Retrospective, cross-sectional analysis. Using data from 318,700 adults enrolled in an integrated delivery system between December 2012 and November 2013, we examined: 1) online patient portal use that directly engages the electronic health record and 2) portal use over desktops/laptops only, mobile devices only, or both device types. The primary covariate was race/ethnicity (non-Hispanic white, black, Hispanic, and Asian). Other covariates included age, sex, primary language, and neighborhood-level income and education. Portal use and devices used were assessed with multiple and multinomial logistic models, respectively. From December 2012 to November 2013, 56% of enrollees used the patient portal. Of these portal users, 62% used desktops/laptops only, 6% used mobile devices only, and 32% used both desktops/laptops and mobile devices. Black, Hispanic, and Asian enrollees had significantly lower odds of portal use than whites. Black and Hispanic portal users also were significantly more likely to use mobile devices only (relative risk ratio, 1.73 and 1.44, respectively) and both device types (1.21 and 1.07, respectively) than desktops/laptops only compared with whites. Although racial/ethnic minority enrollees were less likely to access the online patient portal overall, a greater proportion of black and Hispanic users accessed the patient portal with mobile devices than did non-Hispanic white users. The rapid spread of mobile devices among racial/ethnic minorities may help reduce variation in online patient portal use. Mobile device use may represent an opportunity for healthcare organizations to further engage black and Hispanic enrollees in online patient portal use.

The Remote Analysis Station (RAS) as an instructional system

NASA Technical Reports Server (NTRS)

Rogers, R. H.; Wilson, C. L.; Dye, R. H.; Jaworski, E.

1981-01-01

"Hands-on" training in LANDSAT data analysis techniques can be obtained using a desk-top, interactive remote analysis station (RAS) which consists of a color CRT imagery display, with alphanumeric overwrite and keyboard, as well as a cursor controller and modem. This portable station can communicate via modem and dial-up telephone with a host computer at 1200 baud or it can be hardwired to a host computer at 9600 baud. A Z80 microcomputer controls the display refresh memory and remote station processing. LANDSAT data is displayed as three-band false-color imagery, one-band color-sliced imagery, or color-coded processed imagery. Although the display memory routinely operates at 256 x 256 picture elements, a display resolution of 128 x 128 can be selected to fill the display faster. In the false color mode the computer packs the data into one 8-bit character. When the host is not sending pictorial information the characters sent are in ordinary ASCII code. System capabilities are described.

Editing Tips for Technical Publications in the Joint Nuclear Weapons Publication System (JNWPS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

ALLEN, TARA S.

2002-12-01

These editing tips contain helpful suggestions to assist writers who are writing, editing, and publishing technical publications in the JNWPS. The suggestions clarify some of the most common writing problems and requirements of two publications used in the JNWPS: ''DOE-DTRA TP 1-1, Joint Nuclear Weapons Publications System Operating Procedures, Specifications, and Standards, and United States Government Printing Office Style Manual''. Topics include requirements for abbreviations, formats for drafts, layouts of illustrations and tables, appropriate wording for interim changes, guidance for creating a list of effective pages, how to insert and delete pages and paragraphs, referencing other technical publications, use ofmore » revision bars, requirements for safety precautions, use of hyphens, and how to place warnings, cautions, and notes. Also included are a writer's checklist, samples of draft title pages, and a section of helpful tips for the writers who use the department's desktop publishing software program, Adobe{reg_sign} FrameMaker{reg_sign}.« less

Distributed 3D Information Visualization - Towards Integration of the Dynamic 3D Graphics and Web Services

NASA Astrophysics Data System (ADS)

Vucinic, Dean; Deen, Danny; Oanta, Emil; Batarilo, Zvonimir; Lacor, Chris

This paper focuses on visualization and manipulation of graphical content in distributed network environments. The developed graphical middleware and 3D desktop prototypes were specialized for situational awareness. This research was done in the LArge Scale COllaborative decision support Technology (LASCOT) project, which explored and combined software technologies to support human-centred decision support system for crisis management (earthquake, tsunami, flooding, airplane or oil-tanker incidents, chemical, radio-active or other pollutants spreading, etc.). The performed state-of-the-art review did not identify any publicly available large scale distributed application of this kind. Existing proprietary solutions rely on the conventional technologies and 2D representations. Our challenge was to apply the "latest" available technologies, such Java3D, X3D and SOAP, compatible with average computer graphics hardware. The selected technologies are integrated and we demonstrate: the flow of data, which originates from heterogeneous data sources; interoperability across different operating systems and 3D visual representations to enhance the end-users interactions.

48 CFR 252.204-7011 - Alternative Line Item Structure.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Unit Unit price Amount 0001 Computer, Desktop with CPU, Monitor, Keyboard and Mouse 20 EA Alternative... Unit Unit Price Amount 0001 Computer, Desktop with CPU, Keyboard and Mouse 20 EA 0002 Monitor 20 EA...

48 CFR 252.204-7011 - Alternative Line Item Structure.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Unit Unit price Amount 0001 Computer, Desktop with CPU, Monitor, Keyboard and Mouse 20 EA Alternative... Unit Unit Price Amount 0001 Computer, Desktop with CPU, Keyboard and Mouse 20 EA 0002 Monitor 20 EA...

48 CFR 252.204-7011 - Alternative Line Item Structure.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Unit Unit price Amount 0001 Computer, Desktop with CPU, Monitor, Keyboard and Mouse 20 EA Alternative... Unit Unit Price Amount 0001 Computer, Desktop with CPU, Keyboard and Mouse 20 EA 0002 Monitor 20 EA...

48 CFR 252.204-7011 - Alternative Line Item Structure.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Unit Unit price Amount 0001 Computer, Desktop with CPU, Monitor, Keyboard and Mouse 20 EA Alternative... Unit Unit Price Amount 0001 Computer, Desktop with CPU, Keyboard and Mouse 20 EA 0002 Monitor 20 EA...

Preliminary Design and Evaluation of Portable Electronic Flight Progress Strips

NASA Technical Reports Server (NTRS)

Doble, Nathan A.; Hansman, R. John

2002-01-01

There has been growing interest in using electronic alternatives to the paper Flight Progress Strip (FPS) for air traffic control. However, most research has been centered on radar-based control environments, and has not considered the unique operational needs of the airport air traffic control tower. Based on an analysis of the human factors issues for control tower Decision Support Tool (DST) interfaces, a requirement has been identified for an interaction mechanism which replicates the advantages of the paper FPS (e.g., head-up operation, portability) but also enables input and output with DSTs. An approach has been developed which uses a Portable Electronic FPS that has attributes of both a paper strip and an electronic strip. The prototype flight strip system uses Personal Digital Assistants (PDAs) to replace individual paper strips in addition to a central management interface which is displayed on a desktop computer. Each PDA is connected to the management interface via a wireless local area network. The Portable Electronic FPSs replicate the core functionality of paper flight strips and have additional features which provide a heads-up interface to a DST. A departure DST is used as a motivating example. The central management interface is used for aircraft scheduling and sequencing and provides an overview of airport departure operations. This paper will present the design of the Portable Electronic FPS system as well as preliminary evaluation results.

Model driven development of clinical information sytems using openEHR.

PubMed

Atalag, Koray; Yang, Hong Yul; Tempero, Ewan; Warren, Jim

2011-01-01

openEHR and the recent international standard (ISO 13606) defined a model driven software development methodology for health information systems. However there is little evidence in the literature describing implementation; especially for desktop clinical applications. This paper presents an implementation pathway using .Net/C# technology for Microsoft Windows desktop platforms. An endoscopy reporting application driven by openEHR Archetypes and Templates has been developed. A set of novel GUI directives has been defined and presented which guides the automatic graphical user interface generator to render widgets properly. We also reveal the development steps and important design decisions; from modelling to the final software product. This might provide guidance for other developers and form evidence required for the adoption of these standards for vendors and national programs alike.

High-performance image reconstruction in fluorescence tomography on desktop computers and graphics hardware.

PubMed

Freiberger, Manuel; Egger, Herbert; Liebmann, Manfred; Scharfetter, Hermann

2011-11-01

Image reconstruction in fluorescence optical tomography is a three-dimensional nonlinear ill-posed problem governed by a system of partial differential equations. In this paper we demonstrate that a combination of state of the art numerical algorithms and a careful hardware optimized implementation allows to solve this large-scale inverse problem in a few seconds on standard desktop PCs with modern graphics hardware. In particular, we present methods to solve not only the forward but also the non-linear inverse problem by massively parallel programming on graphics processors. A comparison of optimized CPU and GPU implementations shows that the reconstruction can be accelerated by factors of about 15 through the use of the graphics hardware without compromising the accuracy in the reconstructed images.

Design and construction of a desktop AC susceptometer using an Arduino and a Bluetooth for serial interface

NASA Astrophysics Data System (ADS)

Pérez, Israel; Ángel Hernández Cuevas, José; Trinidad Elizalde Galindo, José

2018-05-01

We designed and developed a desktop AC susceptometer for the characterization of materials. The system consists of a lock-in amplifier, an AC function generator, a couple of coils, a sample holder, a computer system with a designed software in freeware C++ code, and an Arduino card coupled to a Bluetooth module. The Arduino/Bluetooth serial interface allows the user to have a connection to almost any computer and thus avoids the problem of connectivity between the computer and the peripherals, such as the lock-in amplifier and the function generator. The Bluetooth transmitter/receiver used is a commercial device which is robust and fast. These new features reduce the size and increase the versatility of the susceptometer, for it can be used with a simple laptop. To test our instrument, we performed measurements on magnetic materials and show that the system is reliable at both room temperature and cryogenic temperatures (77 K). The instrument is suitable for any physics or engineering laboratory either for research or academic purposes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, G P; Logan, C M

We have estimated interference from external background radiation for a computed tomography (CT) scanner. Our intention is to estimate the interference that would be expected for the high-resolution SkyScan 1072 desk-top x-ray microtomography system. The SkyScan system uses a Microfocus x-ray source capable of a 10-{micro}m focal spot at a maximum current of 0.1 mA and a maximum energy of 130 kVp. All predictions made in this report assume using the x-ray source at the smallest spot size, maximum energy, and operating at the maximum current. Some of the systems basic geometry that is used for these estimates are: (1)more » Source-to-detector distance: 250 mm, (2) Minimum object-to-detector distance: 40 mm, and (3) Maximum object-to-detector distance: 230 mm. This is a first-order, rough estimate of the quantity of interference expected at the system detector caused by background radiation. The amount of interference is expressed by using the ratio of exposure expected at the detector of the CT system. The exposure values for the SkyScan system are determined by scaling the measured values of an x-ray source and the background radiation adjusting for the difference in source-to-detector distance and current. The x-ray source that was used for these measurements was not the SkyScan Microfocus x-ray tube. Measurements were made using an x-ray source that was operated at the same applied voltage but higher current for better statistics.« less

Technologies for autonomous integrated lab-on-chip systems for space missions

NASA Astrophysics Data System (ADS)

Nascetti, A.; Caputo, D.; Scipinotti, R.; de Cesare, G.

2016-11-01

Lab-on-chip devices are ideal candidates for use in space missions where experiment automation, system compactness, limited weight and low sample and reagent consumption are required. Currently, however, most microfluidic systems require external desktop instrumentation to operate and interrogate the chip, thus strongly limiting their use as stand-alone systems. In order to overcome the above-mentioned limitations our research group is currently working on the design and fabrication of "true" lab-on-chip systems that integrate in a single device all the analytical steps from the sample preparation to the detection without the need for bulky external components such as pumps, syringes, radiation sources or optical detection systems. Three critical points can be identified to achieve 'true' lab-on-chip devices: sample handling, analytical detection and signal transduction. For each critical point, feasible solutions are presented and evaluated. Proposed microfluidic actuation and control is based on electrowetting on dielectrics, autonomous capillary networks and active valves. Analytical detection based on highly specific chemiluminescent reactions is used to avoid external radiation sources. Finally, the integration on the same chip of thin film sensors based on hydrogenated amorphous silicon is discussed showing practical results achieved in different sensing tasks.

76 FR 43278 - Privacy Act; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... computer (PC). The Security Management Officer's office remains locked when not in use. RETENTION AND... records to include names, addresses, social security numbers, service computation dates, leave usage data... that resides on a desktop computer. RETRIEVABILITY: Records maintained in file folders are indexed and...

Personal Computers and Laser Printers Are Becoming Popular Tools for Creating Documents on Campuses.

ERIC Educational Resources Information Center

DeLoughry, Thomas J.

1987-01-01

Desktop publishing techniques are bringing control over institutional newsletters, catalogues, brochures, and many other print materials directly to the author's office. The technology also has the potential for integrating campus information systems and saving much time and money. (MSE)

Mobile and Accessible Learning for MOOCs

ERIC Educational Resources Information Center

Sharples, Mike; Kloos, Carlos Delgado; Dimitriadis, Yannis; Garlatti, Serge; Specht, Marcus

2015-01-01

Many modern web-based systems provide a "responsive" design that allows material and services to be accessed on mobile and desktop devices, with the aim of providing "ubiquitous access." Besides offering access to learning materials such as podcasts and videos across multiple locations, mobile, wearable and ubiquitous…

Personal Alarm System

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-04-17

Software that runs on smartphones and desktop web browsers and notifies border officials of radiation alarms. It displays images and data associated with an alarm and provides a variety of reports. DOE had a need for discrete notification. PAS replaces the lights and sounds of a Radiation Portal Monitor.

Informatics in radiology (infoRAD): Vendor-neutral case input into a server-based digital teaching file system.

PubMed

Kamauu, Aaron W C; DuVall, Scott L; Robison, Reid J; Liimatta, Andrew P; Wiggins, Richard H; Avrin, David E

2006-01-01

Although digital teaching files are important to radiology education, there are no current satisfactory solutions for export of Digital Imaging and Communications in Medicine (DICOM) images from picture archiving and communication systems (PACS) in desktop publishing format. A vendor-neutral digital teaching file, the Radiology Interesting Case Server (RadICS), offers an efficient tool for harvesting interesting cases from PACS without requiring modifications of the PACS configurations. Radiologists push imaging studies from PACS to RadICS via the standard DICOM Send process, and the RadICS server automatically converts the DICOM images into the Joint Photographic Experts Group format, a common desktop publishing format. They can then select key images and create an interesting case series at the PACS workstation. RadICS was tested successfully against multiple unmodified commercial PACS. Using RadICS, radiologists are able to harvest and author interesting cases at the point of clinical interpretation with minimal disruption in clinical work flow. RSNA, 2006

[The personal computer as a rehabilitation aid for severely handicapped patients].

PubMed

Fischbach, F

1994-02-01

The case example presented outlines the efforts of a quadriplegic young man who has succeeded in finding himself an occupational basis through training as an expert in electronic desktop publishing (DTP). Due to his severe mobility handicaps, computerized workstations for DTP training had been put up both in the training company and in his own home. These Desktop Publishing systems enable even very severely disabled persons to perform at a par with non-disabled persons. If this adapted workplace is connected to a communication network, the work results need not be delivered materially to the place where they are needed or further worked on, but can be dispatched electronically to the addressee. Communication networks enable the disabled person to easily exchange data with other workstations, or, through the use of modems to access the public telephone system, to send messages from his private environment (e.g., for sending fax messages or placing information in his partners' electronic mailboxes).

Development of a Google-based search engine for data mining radiology reports.

PubMed

Erinjeri, Joseph P; Picus, Daniel; Prior, Fred W; Rubin, David A; Koppel, Paul

2009-08-01

The aim of this study is to develop a secure, Google-based data-mining tool for radiology reports using free and open source technologies and to explore its use within an academic radiology department. A Health Insurance Portability and Accountability Act (HIPAA)-compliant data repository, search engine and user interface were created to facilitate treatment, operations, and reviews preparatory to research. The Institutional Review Board waived review of the project, and informed consent was not required. Comprising 7.9 GB of disk space, 2.9 million text reports were downloaded from our radiology information system to a fileserver. Extensible markup language (XML) representations of the reports were indexed using Google Desktop Enterprise search engine software. A hypertext markup language (HTML) form allowed users to submit queries to Google Desktop, and Google's XML response was interpreted by a practical extraction and report language (PERL) script, presenting ranked results in a web browser window. The query, reason for search, results, and documents visited were logged to maintain HIPAA compliance. Indexing averaged approximately 25,000 reports per hour. Keyword search of a common term like "pneumothorax" yielded the first ten most relevant results of 705,550 total results in 1.36 s. Keyword search of a rare term like "hemangioendothelioma" yielded the first ten most relevant results of 167 total results in 0.23 s; retrieval of all 167 results took 0.26 s. Data mining tools for radiology reports will improve the productivity of academic radiologists in clinical, educational, research, and administrative tasks. By leveraging existing knowledge of Google's interface, radiologists can quickly perform useful searches.

GBOOST: a GPU-based tool for detecting gene-gene interactions in genome-wide case control studies.

PubMed

Yung, Ling Sing; Yang, Can; Wan, Xiang; Yu, Weichuan

2011-05-01

Collecting millions of genetic variations is feasible with the advanced genotyping technology. With a huge amount of genetic variations data in hand, developing efficient algorithms to carry out the gene-gene interaction analysis in a timely manner has become one of the key problems in genome-wide association studies (GWAS). Boolean operation-based screening and testing (BOOST), a recent work in GWAS, completes gene-gene interaction analysis in 2.5 days on a desktop computer. Compared with central processing units (CPUs), graphic processing units (GPUs) are highly parallel hardware and provide massive computing resources. We are, therefore, motivated to use GPUs to further speed up the analysis of gene-gene interactions. We implement the BOOST method based on a GPU framework and name it GBOOST. GBOOST achieves a 40-fold speedup compared with BOOST. It completes the analysis of Wellcome Trust Case Control Consortium Type 2 Diabetes (WTCCC T2D) genome data within 1.34 h on a desktop computer equipped with Nvidia GeForce GTX 285 display card. GBOOST code is available at http://bioinformatics.ust.hk/BOOST.html#GBOOST.

Ultra-Scale Computing for Emergency Evacuation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhaduri, Budhendra L; Nutaro, James J; Liu, Cheng

2010-01-01

Emergency evacuations are carried out in anticipation of a disaster such as hurricane landfall or flooding, and in response to a disaster that strikes without a warning. Existing emergency evacuation modeling and simulation tools are primarily designed for evacuation planning and are of limited value in operational support for real time evacuation management. In order to align with desktop computing, these models reduce the data and computational complexities through simple approximations and representations of real network conditions and traffic behaviors, which rarely represent real-world scenarios. With the emergence of high resolution physiographic, demographic, and socioeconomic data and supercomputing platforms, itmore » is possible to develop micro-simulation based emergency evacuation models that can foster development of novel algorithms for human behavior and traffic assignments, and can simulate evacuation of millions of people over a large geographic area. However, such advances in evacuation modeling and simulations demand computational capacity beyond the desktop scales and can be supported by high performance computing platforms. This paper explores the motivation and feasibility of ultra-scale computing for increasing the speed of high resolution emergency evacuation simulations.« less

PuffinPlot: A versatile, user-friendly program for paleomagnetic analysis

NASA Astrophysics Data System (ADS)

Lurcock, P. C.; Wilson, G. S.

2012-06-01

PuffinPlot is a user-friendly desktop application for analysis of paleomagnetic data, offering a unique combination of features. It runs on several operating systems, including Windows, Mac OS X, and Linux; supports both discrete and long core data; and facilitates analysis of very weakly magnetic samples. As well as interactive graphical operation, PuffinPlot offers batch analysis for large volumes of data, and a Python scripting interface for programmatic control of its features. Available data displays include demagnetization/intensity, Zijderveld, equal-area (for sample, site, and suite level demagnetization data, and for magnetic susceptibility anisotropy data), a demagnetization data table, and a natural remanent magnetization intensity histogram. Analysis types include principal component analysis, Fisherian statistics, and great-circle path intersections. The results of calculations can be exported as CSV (comma-separated value) files; graphs can be printed, and can also be saved as publication-quality vector files in SVG or PDF format. PuffinPlot is free, and the program, user manual, and fully documented source code may be downloaded from http://code.google.com/p/puffinplot/.

Semantic Document Model to Enhance Data and Knowledge Interoperability

NASA Astrophysics Data System (ADS)

Nešić, Saša

To enable document data and knowledge to be efficiently shared and reused across application, enterprise, and community boundaries, desktop documents should be completely open and queryable resources, whose data and knowledge are represented in a form understandable to both humans and machines. At the same time, these are the requirements that desktop documents need to satisfy in order to contribute to the visions of the Semantic Web. With the aim of achieving this goal, we have developed the Semantic Document Model (SDM), which turns desktop documents into Semantic Documents as uniquely identified and semantically annotated composite resources, that can be instantiated into human-readable (HR) and machine-processable (MP) forms. In this paper, we present the SDM along with an RDF and ontology-based solution for the MP document instance. Moreover, on top of the proposed model, we have built the Semantic Document Management System (SDMS), which provides a set of services that exploit the model. As an application example that takes advantage of SDMS services, we have extended MS Office with a set of tools that enables users to transform MS Office documents (e.g., MS Word and MS PowerPoint) into Semantic Documents, and to search local and distant semantic document repositories for document content units (CUs) over Semantic Web protocols.

Interpretation of Coronary Angiograms Recorded Using Google Glass: A Comparative Analysis.

PubMed

Duong, Thao; Wosik, Jedrek; Christakopoulos, Georgios E; Martínez Parachini, José Roberto; Karatasakis, Aris; Tarar, Muhammad Nauman Javed; Resendes, Erica; Rangan, Bavana V; Roesle, Michele; Grodin, Jerrold; Abdullah, Shuaib M; Banerjee, Subhash; Brilakis, Emmanouil S

2015-10-01

Google Glass (Google, Inc) is a voice-activated, hands-free, optical head-mounted display device capable of taking pictures, recording videos, and transmitting data via wi-fi. In the present study, we examined the accuracy of coronary angiogram interpretation, recorded using Google Glass. Google Glass was used to record 15 angiograms with 17 major findings and the participants were asked to interpret those recordings on: (1) an iPad (Apple, Inc); or (2) a desktop computer. Interpretation was compared with the original angiograms viewed on a desktop. Ten physicians (2 interventional cardiologists and 8 cardiology fellows) participated. One point was assigned for each correct finding, for a maximum of 17 points. The mean angiogram interpretation score for Google Glass angiogram recordings viewed on an iPad or a desktop vs the original angiograms viewed on a desktop was 14.9 ± 1.1, 15.2 ± 1.8, and 15.9 ± 1.1, respectively (P=.06 between the iPad and the original angiograms, P=.51 between the iPad and recordings viewed on a desktop, and P=.43 between the recordings viewed on a desktop and the original angiograms). In a post-study survey, one of the 10 physicians (10%) was "neutral" with the quality of the recordings using Google Glass, 6 physicians (60%) were "somewhat satisfied," and 3 physicians (30%) were "very satisfied." This small pilot study suggests that the quality of coronary angiogram video recordings obtained using Google Glass may be adequate for recognition of major findings, supporting its expanding use in telemedicine.

Validation of tablet-based evaluation of color fundus images

PubMed Central

Christopher, Mark; Moga, Daniela C.; Russell, Stephen R.; Folk, James C.; Scheetz, Todd; Abràmoff, Michael D.

2012-01-01

Purpose To compare diabetic retinopathy (DR) referral recommendations made by viewing fundus images using a tablet computer to recommendations made using a standard desktop display. Methods A tablet computer (iPad) and a desktop PC with a high-definition color display were compared. For each platform, two retinal specialists independently rated 1200 color fundus images from patients at risk for DR using an annotation program, Truthseeker. The specialists determined whether each image had referable DR, and also how urgently each patient should be referred for medical examination. Graders viewed and rated the randomly presented images independently and were masked to their ratings on the alternative platform. Tablet- and desktop display-based referral ratings were compared using cross-platform, intra-observer kappa as the primary outcome measure. Additionally, inter-observer kappa, sensitivity, specificity, and area under ROC (AUC) were determined. Results A high level of cross-platform, intra-observer agreement was found for the DR referral ratings between the platforms (κ=0.778), and for the two graders, (κ=0.812). Inter-observer agreement was similar for the two platforms (κ=0.544 and κ=0.625 for tablet and desktop, respectively). The tablet-based ratings achieved a sensitivity of 0.848, a specificity of 0.987, and an AUC of 0.950 compared to desktop display-based ratings. Conclusions In this pilot study, tablet-based rating of color fundus images for subjects at risk for DR was consistent with desktop display-based rating. These results indicate that tablet computers can be reliably used for clinical evaluation of fundus images for DR. PMID:22495326

Exploring Learner Acceptance of the Use of Virtual Reality in Medical Education: A Case Study of Desktop and Projection-Based Display Systems

ERIC Educational Resources Information Center

Huang, Hsiu-Mei; Liaw, Shu-Sheng; Lai, Chung-Min

2016-01-01

Advanced technologies have been widely applied in medical education, including human-patient simulators, immersive virtual reality Cave Automatic Virtual Environment systems, and video conferencing. Evaluating learner acceptance of such virtual reality (VR) learning environments is a critical issue for ensuring that such technologies are used to…

System and Method for Detecting Unauthorized Device Access by Comparing Multiple Independent Spatial-Time Data Sets from Other Devices

NASA Technical Reports Server (NTRS)

Westmeyer, Paul A. (Inventor); Wertenberg, Russell F. (Inventor); Krage, Frederick J. (Inventor); Riegel, Jack F. (Inventor)

2017-01-01

An authentication procedure utilizes multiple independent sources of data to determine whether usage of a device, such as a desktop computer, is authorized. When a comparison indicates an anomaly from the base-line usage data, the system, provides a notice that access of the first device is not authorized.

WinHPC System User Basics | High-Performance Computing | NREL

Science.gov Websites

guidance for starting to use this high-performance computing (HPC) system at NREL. Also see WinHPC policies ) when you are finished. Simply quitting Remote Desktop will keep your session active and using resources node). 2. Log in with your NREL.gov username/password. Remember to log out when finished. Mac 1. If you

Chemical Inventory Management at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Kraft, Shirley S.; Homan, Joseph R.; Bajorek, Michael J.; Dominguez, Manuel B.; Smith, Vanessa L.

1997-01-01

The Chemical Management System (CMS) is a client/server application developed with Power Builder and Sybase for the Lewis Research Center (LeRC). Power Builder is a client-server application development tool, Sybase is a Relational Database Management System. The entire LeRC community can access the CMS from any desktop environment. The multiple functions and benefits of the CMS are addressed.

A desktop system of virtual morphometric globes for Mars and the Moon

NASA Astrophysics Data System (ADS)

Florinsky, I. V.; Filippov, S. V.

2017-03-01

Global morphometric models can be useful for earth and planetary studies. Virtual globes - programs implementing interactive three-dimensional (3D) models of planets - are increasingly used in geo- and planetary sciences. We describe the development of a desktop system of virtual morphometric globes for Mars and the Moon. As the initial data, we used 15'-gridded global digital elevation models (DEMs) extracted from the Mars Orbiter Laser Altimeter (MOLA) and the Lunar Orbiter Laser Altimeter (LOLA) gridded archives. For two celestial bodies, we derived global digital models of several morphometric attributes, such as horizontal curvature, vertical curvature, minimal curvature, maximal curvature, and catchment area. To develop the system, we used Blender, the free open-source software for 3D modeling and visualization. First, a 3D sphere model was generated. Second, the global morphometric maps were imposed to the sphere surface as textures. Finally, the real-time 3D graphics Blender engine was used to implement rotation and zooming of the globes. The testing of the developed system demonstrated its good performance. Morphometric globes clearly represent peculiarities of planetary topography, according to the physical and mathematical sense of a particular morphometric variable.

Yearbook DTP Course Meets Traditional Goals.

ERIC Educational Resources Information Center

Olman, Gloria

1992-01-01

Outlines a two-semester high school course in Yearbook Desktop Publishing in which students learn desktop publishing skills along with the traditional yearbook curriculum. Presents general and behavioral objectives, rationale, and a course outline of concepts to be covered. (SR)

75 FR 25185 - Broadband Initiatives Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

..., excluding desktop or laptop computers, computer hardware and software (including anti-virus, anti-spyware, and other security software), audio or video equipment, computer network components... 10 desktop or laptop computers and individual workstations to be located within the rural library...

Information Retrieval System for Japanese Standard Disease-Code Master Using XML Web Service

PubMed Central

Hatano, Kenji; Ohe, Kazuhiko

2003-01-01

Information retrieval system of Japanese Standard Disease-Code Master Using XML Web Service is developed. XML Web Service is a new distributed processing system by standard internet technologies. With seamless remote method invocation of XML Web Service, users are able to get the latest disease code master information from their rich desktop applications or internet web sites, which refer to this service. PMID:14728364

ISA-97 Compliant Architecture Testbed (ICAT) Projectry Organizations

DTIC Science & Technology

1992-03-30

by the System Integracion Directorate of the USAISEC, August 29, 1992. The report discusses the refinement of the ISA-97 Compliant Architecture Model...browser and iconic representations of system objects and resources. When the user is interacting with an application which has multiple compo- nents, it is...computer communications, it is not uncommon for large information systems to be shared by users on multiple machines. The trend towards the desktop

Going on a Desktop Diet

ERIC Educational Resources Information Center

St. Jean, Michael

2008-01-01

With no specific state or federal mandates to districts to maintain comprehensive technology infrastructure, how do districts, in the face of mounting financial pressures, continue to build and maintain their networks, integrate their systems, and expand their resources in a way that is reasonably "budget-proof?" In this article, the…

The Technological Evolution in Schools: Reflections and Projections.

ERIC Educational Resources Information Center

Higgins, James E.

1991-01-01

Presents a first-person account of one teacher's experiences with computer hardware and software. The article discusses various programs and applications, such as integrated learning systems, database searching via CD-ROM, desktop publishing, authoring programs, and indicates future changes in instruction with increasing use of technology. (SM)

Multimedia: Beyond the Desktop.

ERIC Educational Resources Information Center

Galbreath, Jeremy

1993-01-01

Describes the Central Media Resource System (CMRS), a method that allows multimedia instruction to large groups of students. Highlights include the information infrastructure, including fiber optics and coaxial cable; use of the CMRS in the classroom and in the media resource center; and future possibilities, including local and wide area…

75 FR 32915 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... used to authenticate authorized desktop and laptop computer users. Computer servers are scanned monthly... data is also used for management and statistical reports and studies. Routine uses of records... duties. The computer files are password protected with access restricted to authorized users. Records are...

Final Report: MaRSPlus Sensor System Electrical Cable Management and Distributed Motor Control Computer Interface

NASA Technical Reports Server (NTRS)

Reil, Robin

2011-01-01

The success of JPL's Next Generation Imaging Spectrometer (NGIS) in Earth remote sensing has inspired a follow-on instrument project, the MaRSPlus Sensor System (MSS). One of JPL's responsibilities in the MSS project involves updating the documentation from the previous JPL airborne imagers to provide all the information necessary for an outside customer to operate the instrument independently. As part of this documentation update, I created detailed electrical cabling diagrams to provide JPL technicians with clear and concise build instructions and a database to track the status of cables from order to build to delivery. Simultaneously, a distributed motor control system is being developed for potential use on the proposed 2018 Mars rover mission. This system would significantly reduce the mass necessary for rover motor control, making more mass space available to other important spacecraft systems. The current stage of the project consists of a desktop computer talking to a single "cold box" unit containing the electronics to drive a motor. In order to test the electronics, I developed a graphical user interface (GUI) using MATLAB to allow a user to send simple commands to the cold box and display the responses received in a user-friendly format.

JVM: Java Visual Mapping tool for next generation sequencing read.

PubMed

Yang, Ye; Liu, Juan

2015-01-01

We developed a program JVM (Java Visual Mapping) for mapping next generation sequencing read to reference sequence. The program is implemented in Java and is designed to deal with millions of short read generated by sequence alignment using the Illumina sequencing technology. It employs seed index strategy and octal encoding operations for sequence alignments. JVM is useful for DNA-Seq, RNA-Seq when dealing with single-end resequencing. JVM is a desktop application, which supports reads capacity from 1 MB to 10 GB.

Metadata Wizard: an easy-to-use tool for creating FGDC-CSDGM metadata for geospatial datasets in ESRI ArcGIS Desktop

USGS Publications Warehouse

Ignizio, Drew A.; O'Donnell, Michael S.; Talbert, Colin B.

2014-01-01

Creating compliant metadata for scientific data products is mandated for all federal Geographic Information Systems professionals and is a best practice for members of the geospatial data community. However, the complexity of the The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata, the limited availability of easy-to-use tools, and recent changes in the ESRI software environment continue to make metadata creation a challenge. Staff at the U.S. Geological Survey Fort Collins Science Center have developed a Python toolbox for ESRI ArcDesktop to facilitate a semi-automated workflow to create and update metadata records in ESRI’s 10.x software. The U.S. Geological Survey Metadata Wizard tool automatically populates several metadata elements: the spatial reference, spatial extent, geospatial presentation format, vector feature count or raster column/row count, native system/processing environment, and the metadata creation date. Once the software auto-populates these elements, users can easily add attribute definitions and other relevant information in a simple Graphical User Interface. The tool, which offers a simple design free of esoteric metadata language, has the potential to save many government and non-government organizations a significant amount of time and costs by facilitating the development of The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata compliant metadata for ESRI software users. A working version of the tool is now available for ESRI ArcDesktop, version 10.0, 10.1, and 10.2 (downloadable at http:/www.sciencebase.gov/metadatawizard).

Rx for Journalism Departments and Their Budgets--DTP.

ERIC Educational Resources Information Center

Watterson, C. B.

1988-01-01

One way to entice students into high school journalism courses is to integrate desktop publishing (via microcomputers) as a vehicle for type-setting, design, and pagination of school publications. Desktop publishing also saves time, cuts costs, and provides vocational training. (MLH)

Stop the Presses! An Update on Desktop Publishing.

ERIC Educational Resources Information Center

McCarthy, Robert

1988-01-01

Discusses educational applications of desktop publishing at the elementary, secondary, and college levels. Topics discussed include page design capabilities; hardware requirements; software; the production of school newsletters and newspapers; cost factors; writing improvement; university departmental publications; and college book publishing. A…

Pre-Mastering and CD-WO Evaluations

NASA Technical Reports Server (NTRS)

Hecox, D.; Hyon, J.; Martin, M.; Marski, K.; Shields, E.; Sorensen, S.; Teramae, S.

1993-01-01

This article reviews the features and functionality of five desktop pre-mastering software packages for the PC. Desktop pre-mastering packages are aimed primarily at end-users interested in bringing CD-ROM publishing tasks in-house, rather than traditional CD-ROM developers.

Big Memory Elegance: HyperCard Information Processing and Desktop Publishing.

ERIC Educational Resources Information Center

Bitter, Gary G.; Gerson, Charles W., Jr.

1991-01-01

Discusses hardware requirements, functions, and applications of five information processing and desktop publishing software packages for the Macintosh: HyperCard, PageMaker, Cricket Presents, Power Point, and Adobe illustrator. Benefits of these programs for schools are considered. (MES)

Desktop Publishing: A New Frontier for Instructional Technologists.

ERIC Educational Resources Information Center

Bell, Norman T.; Warner, James W.

1986-01-01

Discusses new possibilities that computers and laser printers offer instructional technologists. Includes a brief history of printed communications, a description of new technological advances referred to as "desktop publishing," and suggests the application of this technology to instructional tasks. (TW)

Electronic Health Record Logs Indicate That Physicians Split Time Evenly Between Seeing Patients And Desktop Medicine.

PubMed

Tai-Seale, Ming; Olson, Cliff W; Li, Jinnan; Chan, Albert S; Morikawa, Criss; Durbin, Meg; Wang, Wei; Luft, Harold S

2017-04-01

Time spent by physicians is a key resource in health care delivery. This study used data captured by the access time stamp functionality of an electronic health record (EHR) to examine physician work effort. This is a potentially powerful, yet unobtrusive, way to study physicians' use of time. We used data on physicians' time allocation patterns captured by over thirty-one million EHR transactions in the period 2011-14 recorded by 471 primary care physicians, who collectively worked on 765,129 patients' EHRs. Our results suggest that the physicians logged an average of 3.08 hours on office visits and 3.17 hours on desktop medicine each day. Desktop medicine consists of activities such as communicating with patients through a secure patient portal, responding to patients' online requests for prescription refills or medical advice, ordering tests, sending staff messages, and reviewing test results. Over time, log records from physicians showed a decline in the time allocated to face-to-face visits, accompanied by an increase in time allocated to desktop medicine. Staffing and scheduling in the physician's office, as well as provider payment models for primary care practice, should account for these desktop medicine efforts. Project HOPE—The People-to-People Health Foundation, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehlen, Mark A.; Sun, Amy C.; Pepple, Mark A.

The potential impacts of man-made and natural disasters on chemical plants, complexes, and supply chains are of great importance to homeland security. To be able to estimate these impacts, we developed an agent-based chemical supply chain model that includes: chemical plants with enterprise operations such as purchasing, production scheduling, and inventories; merchant chemical markets, and multi-modal chemical shipments. Large-scale simulations of chemical-plant activities and supply chain interactions, running on desktop computers, are used to estimate the scope and duration of disruptive-event impacts, and overall system resilience, based on the extent to which individual chemical plants can adjust their internal operationsmore » (e.g., production mixes and levels) versus their external interactions (market sales and purchases, and transportation routes and modes). As a result, to illustrate how the model estimates the impacts of a hurricane disruption, a simple example model centered on 1,4-butanediol is presented.« less

Chemical supply chain modeling for analysis of homeland security events

DOE PAGES

Ehlen, Mark A.; Sun, Amy C.; Pepple, Mark A.; ...

2013-09-06

The potential impacts of man-made and natural disasters on chemical plants, complexes, and supply chains are of great importance to homeland security. To be able to estimate these impacts, we developed an agent-based chemical supply chain model that includes: chemical plants with enterprise operations such as purchasing, production scheduling, and inventories; merchant chemical markets, and multi-modal chemical shipments. Large-scale simulations of chemical-plant activities and supply chain interactions, running on desktop computers, are used to estimate the scope and duration of disruptive-event impacts, and overall system resilience, based on the extent to which individual chemical plants can adjust their internal operationsmore » (e.g., production mixes and levels) versus their external interactions (market sales and purchases, and transportation routes and modes). As a result, to illustrate how the model estimates the impacts of a hurricane disruption, a simple example model centered on 1,4-butanediol is presented.« less

Evaluation of the SeedCounter, A Mobile Application for Grain Phenotyping.

PubMed

Komyshev, Evgenii; Genaev, Mikhail; Afonnikov, Dmitry

2016-01-01

Grain morphometry in cereals is an important step in selecting new high-yielding plants. Manual assessment of parameters such as the number of grains per ear and grain size is laborious. One solution to this problem is image-based analysis that can be performed using a desktop PC. Furthermore, the effectiveness of analysis performed in the field can be improved through the use of mobile devices. In this paper, we propose a method for the automated evaluation of phenotypic parameters of grains using mobile devices running the Android operational system. The experimental results show that this approach is efficient and sufficiently accurate for the large-scale analysis of phenotypic characteristics in wheat grains. Evaluation of our application under six different lighting conditions and three mobile devices demonstrated that the lighting of the paper has significant influence on the accuracy of our method, unlike the smartphone type.

Intelligent Access to Sequence and Structure Databases (IASSD) - an interface for accessing information from major web databases.

PubMed

Ganguli, Sayak; Gupta, Manoj Kumar; Basu, Protip; Banik, Rahul; Singh, Pankaj Kumar; Vishal, Vineet; Bera, Abhisek Ranjan; Chakraborty, Hirak Jyoti; Das, Sasti Gopal

2014-01-01

With the advent of age of big data and advances in high throughput technology accessing data has become one of the most important step in the entire knowledge discovery process. Most users are not able to decipher the query result that is obtained when non specific keywords or a combination of keywords are used. Intelligent access to sequence and structure databases (IASSD) is a desktop application for windows operating system. It is written in Java and utilizes the web service description language (wsdl) files and Jar files of E-utilities of various databases such as National Centre for Biotechnology Information (NCBI) and Protein Data Bank (PDB). Apart from that IASSD allows the user to view protein structure using a JMOL application which supports conditional editing. The Jar file is freely available through e-mail from the corresponding author.

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, Aaron L

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit presentation from the WPTO FY14-FY16 Peer Review. The toolkit is aimed at regulatory agencies, consultants, project developers, the public, and any other party interested in learning more about the hydropower regulatory process.

Junior High Publications: Junior High School Staff Members Master Same Desktop Publishing as High School Counterparts.

ERIC Educational Resources Information Center

Pyle, Betty; Cangelosi, Sandy

1988-01-01

Argues that middle and junior high schools can produce professional looking student publications by using desktop publishing. Presents three newspaper pages designed with the Apple Macintosh, using "Pagemaker,""Cricket Draw," and "Microsoft Word" software. (MM)

HEP Computing

Science.gov Websites

Argonne National Laboratory High Energy Physics Division Windows Desktops Problem Report Service Request Password Help New Users Back to HEP Computing Email on ANL Exchange: See Windows Clients section (Outlook or Thunderbird recommended) Web Browsers: Web Browsers for Windows Desktops Software: Available

A Course in Desktop Publishing.

ERIC Educational Resources Information Center

Somerick, Nancy M.

1992-01-01

Describes "Promotional Publications," a required course for public relations majors, which teaches the basics of desktop publishing. Outlines how the course covers the preparation of publications used as communication tools in public relations, advertising, and organizations, with an emphasis upon design, layout, and technology. (MM)

Warm Hearts/Cold Type: Desktop Publishing Arrives.

ERIC Educational Resources Information Center

Kramer, Felix

1991-01-01

Describes desktop publishing (DTP) that may be suitable for community, activist, and nonprofit groups and discusses how it is changing written communication. Topics discussed include costs; laser printers; time savings; hardware and software selection; and guidelines to consider when establishing DTP capability. (LRW)

Desktop Publishing.

ERIC Educational Resources Information Center

Stanley, Milt

1986-01-01

Defines desktop publishing, describes microcomputer developments and software tools that make it possible, and discusses its use as an instructional tool to improve writing skills. Reasons why students' work should be published, examples of what to publish, and types of software and hardware to facilitate publishing are reviewed. (MBR)

A Desktop Publishing Course: An Alternative to Internships for Rural Universities.

ERIC Educational Resources Information Center

Flammia, Madelyn

1992-01-01

Suggests that a course in desktop publishing can provide students at rural schools with experience equivalent to internships. Notes that the course provided students with real-world experience and benefited the university in terms of services and public relations. (RS)

What Do Information Technology Support Services Really Cost?

ERIC Educational Resources Information Center

Leach, Karen; Smallen, David

1998-01-01

A study examined the cost of information-technology support services in higher education institutions. The report describes the project's origins and work to date and reports initial results in three areas: network services, desktop repair services, and administrative information systems, looking in each case at economies of scale, outsourcing…

Classroom Challenges: Working with Pupils with Communication Disorders

ERIC Educational Resources Information Center

Zebron, Shupikai; Mhute, Isaac; Musingafi, Maxwell Constantine Chando

2015-01-01

The challenge of actively involving students with communication disorders in the formal education systems prompted this desktop study on some of the challenges and problems associated with students with communication disorders in the classroom. This paper examines the relationship between communication disorders and learning from a very basic and…

A Cost Comparison of Alternative Approaches to Distance Education in Developing Countries

NASA Technical Reports Server (NTRS)

Ventre, Gerard G.; Kalu, Alex

1996-01-01

This paper presents a cost comparison of three approaches to two-way interactive distance learning systems for developing countries. Included are costs for distance learning hardware, terrestrial and satellite communication links, and designing instruction for two-way interactive courses. As part of this project, FSEC is developing a 30-hour course in photovoltaic system design that will be used in a variety of experiments using the Advanced Communications Technology Satellite (ACTS). A primary goal of the project is to develop an instructional design and delivery model that can be used for other education and training programs. Over two-thirds of the world photovoltaics market is in developing countries. One of the objectives of this NASA-sponsored project was to develop new and better energy education programs that take advantage of advances in telecommunications and computer technology. The combination of desktop video systems and the sharing of computer applications software is of special interest. Research is being performed to evaluate the effectiveness of some of these technologies as part of this project. The design of the distance learning origination and receive sites discussed in this paper were influenced by the educational community's growing interest in distance education. The following approach was used to develop comparative costs for delivering interactive distance education to developing countries: (1) Representative target locations for receive sites were chosen. The originating site was assumed to be Cocoa, Florida, where FSEC is located; (2) A range of course development costs were determined; (3) The cost of equipment for three alternative two-way interactive distance learning system configurations was determined or estimated. The types of system configurations ranged from a PC-based system that allows instructors to originate instruction from their office using desktop video and shared application software, to a high cost system that uses a electronic classroom; (4) A range of costs for both satellite and terrestrial communications was investigated; (5) The costs of equipment and operation of the alternative configurations for the origination and receive sites were determined; (6) A range of costs for several alternative delivery scenarios (i.e., a mix of live-interactive; asynchronous interactive;use of videotapes) was determined; and (7) A preferred delivery scenario, including cost estimate, was developed.

Software implementation of the SKIPSM paradigm under PIP

NASA Astrophysics Data System (ADS)

Hack, Ralf; Waltz, Frederick M.; Batchelor, Bruce G.

1997-09-01

SKIPSM (separated-kernel image processing using finite state machines) is a technique for implementing large-kernel binary- morphology operators and many other operations. While earlier papers on SKIPSM concentrated mainly on implementations using pipelined hardware, there is considerable scope for achieving major speed improvements in software systems. Using identical control software, one-pass binary erosion and dilation structuring elements (SEs) ranging from the trivial (3 by 3) to the gigantic (51 by 51, or even larger), are readily available. Processing speed is independent of the size of the SE, making the SKIPSM approach practical for work with very large SEs on ordinary desktop computers. PIP (prolog image processing) is an interactive machine vision prototyping environment developed at the University of Wales Cardiff. It consists of a large number of image processing operators embedded within the standard AI language Prolog. This paper describes the SKIPSM implementation of binary morphology operators within PIP. A large set of binary erosion and dilation operations (circles, squares, diamonds, octagons, etc.) is available to the user through a command-line driven dialogue, via pull-down menus, or incorporated into standard (Prolog) programs. Little has been done thus far to optimize speed on this first software implementation of SKIPSM. Nevertheless, the results are impressive. The paper describes sample applications and presents timing figures. Readers have the opportunity to try out these operations on demonstration software written by the University of Wales, or via their WWW home page at http://bruce.cs.cf.ac.uk/bruce/index.html .

VRLane: a desktop virtual safety management program for underground coal mine

NASA Astrophysics Data System (ADS)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

Dynamic provisioning of local and remote compute resources with OpenStack

NASA Astrophysics Data System (ADS)

Giffels, M.; Hauth, T.; Polgart, F.; Quast, G.

2015-12-01

Modern high-energy physics experiments rely on the extensive usage of computing resources, both for the reconstruction of measured events as well as for Monte-Carlo simulation. The Institut fur Experimentelle Kernphysik (EKP) at KIT is participating in both the CMS and Belle experiments with computing and storage resources. In the upcoming years, these requirements are expected to increase due to growing amount of recorded data and the rise in complexity of the simulated events. It is therefore essential to increase the available computing capabilities by tapping into all resource pools. At the EKP institute, powerful desktop machines are available to users. Due to the multi-core nature of modern CPUs, vast amounts of CPU time are not utilized by common desktop usage patterns. Other important providers of compute capabilities are classical HPC data centers at universities or national research centers. Due to the shared nature of these installations, the standardized software stack required by HEP applications cannot be installed. A viable way to overcome this constraint and offer a standardized software environment in a transparent manner is the usage of virtualization technologies. The OpenStack project has become a widely adopted solution to virtualize hardware and offer additional services like storage and virtual machine management. This contribution will report on the incorporation of the institute's desktop machines into a private OpenStack Cloud. The additional compute resources provisioned via the virtual machines have been used for Monte-Carlo simulation and data analysis. Furthermore, a concept to integrate shared, remote HPC centers into regular HEP job workflows will be presented. In this approach, local and remote resources are merged to form a uniform, virtual compute cluster with a single point-of-entry for the user. Evaluations of the performance and stability of this setup and operational experiences will be discussed.

Scribl: an HTML5 Canvas-based graphics library for visualizing genomic data over the web

PubMed Central

Miller, Chase A.; Anthony, Jon; Meyer, Michelle M.; Marth, Gabor

2013-01-01

Motivation: High-throughput biological research requires simultaneous visualization as well as analysis of genomic data, e.g. read alignments, variant calls and genomic annotations. Traditionally, such integrative analysis required desktop applications operating on locally stored data. Many current terabyte-size datasets generated by large public consortia projects, however, are already only feasibly stored at specialist genome analysis centers. As even small laboratories can afford very large datasets, local storage and analysis are becoming increasingly limiting, and it is likely that most such datasets will soon be stored remotely, e.g. in the cloud. These developments will require web-based tools that enable users to access, analyze and view vast remotely stored data with a level of sophistication and interactivity that approximates desktop applications. As rapidly dropping cost enables researchers to collect data intended to answer questions in very specialized contexts, developers must also provide software libraries that empower users to implement customized data analyses and data views for their particular application. Such specialized, yet lightweight, applications would empower scientists to better answer specific biological questions than possible with general-purpose genome browsers currently available. Results: Using recent advances in core web technologies (HTML5), we developed Scribl, a flexible genomic visualization library specifically targeting coordinate-based data such as genomic features, DNA sequence and genetic variants. Scribl simplifies the development of sophisticated web-based graphical tools that approach the dynamism and interactivity of desktop applications. Availability and implementation: Software is freely available online at http://chmille4.github.com/Scribl/ and is implemented in JavaScript with all modern browsers supported. Contact: gabor.marth@bc.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:23172864

Desktop Design for ESOL Teachers.

ERIC Educational Resources Information Center

Walker, Susan

The guide for teachers of English as a Second Language offers practical advice on the format and layout of instructional materials they produce using desktop publishing technology. An introductory section discusses important design considerations for producing effective materials. Subsequent sections describe how to: organize ideas; outline the…

ATM: The Key To Harnessing the Power of Networked Multimedia.

ERIC Educational Resources Information Center

Gross, Rod

1996-01-01

ATM (Asynchronous Transfer Mode) network technology handles the real-time continuous traffic flow necessary to support desktop multimedia applications. Describes network applications already used: desktop video collaboration, distance learning, and broadcasting video delivery. Examines the architecture of ATM technology, video delivery and sound…

Desktop Publishing: Things Gutenberg Never Taught You.

ERIC Educational Resources Information Center

Bowman, Joel P.; Renshaw, Debbie A.

1989-01-01

Provides a desktop publishing (DTP) overview, including: advantages and disadvantages; hardware and software requirements; and future development. Discusses cost-effectiveness, confidentiality, credibility, effects on volume of paper-based communication, and the need for training in layout and design which DTP creates. Includes a glossary of DTP…

What Desktop Publishing Can Teach Professional Writing Students about Publishing.

ERIC Educational Resources Information Center

Dobberstein, Michael

1992-01-01

Points out that desktop publishing is a metatechnology that allows professional writing students access to the production phase of publishing, giving students hands-on practice in preparing text for printing and in learning how that preparation affects the visual meaning of documents. (SR)

Dynamic Collaboration Infrastructure for Hydrologic Science

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Idaszak, R.; Castillo, C.; Yi, H.; Jiang, F.; Jones, N.; Goodall, J. L.

2016-12-01

Data and modeling infrastructure is becoming increasingly accessible to water scientists. HydroShare is a collaborative environment that currently offers water scientists the ability to access modeling and data infrastructure in support of data intensive modeling and analysis. It supports the sharing of and collaboration around "resources" which are social objects defined to include both data and models in a structured standardized format. Users collaborate around these objects via comments, ratings, and groups. HydroShare also supports web services and cloud based computation for the execution of hydrologic models and analysis and visualization of hydrologic data. However, the quantity and variety of data and modeling infrastructure available that can be accessed from environments like HydroShare is increasing. Storage infrastructure can range from one's local PC to campus or organizational storage to storage in the cloud. Modeling or computing infrastructure can range from one's desktop to departmental clusters to national HPC resources to grid and cloud computing resources. How does one orchestrate this vast number of data and computing infrastructure without needing to correspondingly learn each new system? A common limitation across these systems is the lack of efficient integration between data transport mechanisms and the corresponding high-level services to support large distributed data and compute operations. A scientist running a hydrology model from their desktop may require processing a large collection of files across the aforementioned storage and compute resources and various national databases. To address these community challenges a proof-of-concept prototype was created integrating HydroShare with RADII (Resource Aware Data-centric collaboration Infrastructure) to provide software infrastructure to enable the comprehensive and rapid dynamic deployment of what we refer to as "collaborative infrastructure." In this presentation we discuss the results of this proof-of-concept prototype which enabled HydroShare users to readily instantiate virtual infrastructure marshaling arbitrary combinations, varieties, and quantities of distributed data and computing infrastructure in addressing big problems in hydrology.

Analysis, testing, and operation of the MAGI thermal control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yi, Sonny; Hall, Jeffrey L.; Kasper, Brian P.

2014-01-29

The Aerospace Corporation has completed the development of the Mineral and Gas Identifier (MAGI) sensor - an airborne multi-spectral infrared instrument that is designed to discriminate surface composition and to detect gas emissions from the environment. Sensor performance was demonstrated in a series of flights aboard a Twin Otter aircraft in December 2011 as a stepping stone to a future satellite sensor design. To meet sensor performance requirements the thermal control system was designed to operate the HgCdTe focal plane array (FPA) at 50 K with a 1.79 W heat rejection load to a 44.7 K sink and the opticalmore » assembly at 100 K with a 7.5 W heat load to a 82.3 K sink. Two commercial off-theshelf (COTS) Sunpower Stirling cryocoolers were used to meet the instrument’s cooling requirements. A thermal model constructed in Thermal Desktop was used to run parametric studies that guided the mechanical design and sized the two cryocoolers. This paper discusses the development, validation, and operation of the MAGI thermal control system. Detailed energy balances and temperature predictions are presented for various test cases to demonstrate the utility and accuracy of the thermal model. Model inputs included measured values of heat lift as a function of input power and cold tip temperature for the two cryocoolers. These measurements were also used to make predictions of the cool-down behavior from ambient conditions. Advanced heater software was developed to meet unique requirements for both sensor cool-down rate and stability at the set point temperatures.« less

A PDA-based flexible telecommunication system for telemedicine applications.

PubMed

Nazeran, Homer; Setty, Sunil; Haltiwanger, Emily; Gonzalez, Virgilio

2004-01-01

Technology has been used to deliver health care at a distance for many years. Telemedicine is a rapidly growing area and recently there are studies devoted to prehospital care of patients in emergency cases. In this work we have developed a compact, reliable, and low cost PDA-based telecommunication device for telemedicine applications to transmit audio, still images, and vital signs from a remote site to a fixed station such as a clinic or a hospital in real time. This was achieved based on a client-server architecture. A Pocket PC, a miniature camera, and a hands-free microphone were used at the client site and a desktop computer running the Windows XP operating system was used as a server. The server was located at a fixed station. The system was implemented on TCP/IP and HTTP protocol. Field tests have shown that the system can reliably transmit still images, audio, and sample vital signs from a simulated remote site to a fixed station either via a wired or wireless network in real time. The Pocket PC was used at the client site because of its compact size, low cost and processing capabilities.

Rhinoplasty perioperative database using a personal digital assistant.

PubMed

Kotler, Howard S

2004-01-01

To construct a reliable, accurate, and easy-to-use handheld computer database that facilitates the point-of-care acquisition of perioperative text and image data specific to rhinoplasty. A user-modified database (Pendragon Forms [v.3.2]; Pendragon Software Corporation, Libertyville, Ill) and graphic image program (Tealpaint [v.4.87]; Tealpaint Software, San Rafael, Calif) were used to capture text and image data, respectively, on a Palm OS (v.4.11) handheld operating with 8 megabytes of memory. The handheld and desktop databases were maintained secure using PDASecure (v.2.0) and GoldSecure (v.3.0) (Trust Digital LLC, Fairfax, Va). The handheld data were then uploaded to a desktop database of either FileMaker Pro 5.0 (v.1) (FileMaker Inc, Santa Clara, Calif) or Microsoft Access 2000 (Microsoft Corp, Redmond, Wash). Patient data were collected from 15 patients undergoing rhinoplasty in a private practice outpatient ambulatory setting. Data integrity was assessed after 6 months' disk and hard drive storage. The handheld database was able to facilitate data collection and accurately record, transfer, and reliably maintain perioperative rhinoplasty data. Query capability allowed rapid search using a multitude of keyword search terms specific to the operative maneuvers performed in rhinoplasty. Handheld computer technology provides a method of reliably recording and storing perioperative rhinoplasty information. The handheld computer facilitates the reliable and accurate storage and query of perioperative data, assisting the retrospective review of one's own results and enhancement of surgical skills.

Thomas Jefferson, Page Design, and Desktop Publishing.

ERIC Educational Resources Information Center

Hartley, James

1991-01-01

Discussion of page design for desktop publishing focuses on the importance of functional issues as opposed to aesthetic issues, and criticizes a previous article that stressed aesthetic issues. Topics discussed include balance, consistency in text structure, and how differences in layout affect the clarity of "The Declaration of…

Basics of Desktop Publishing. Teacher Edition.

ERIC Educational Resources Information Center

Beeby, Ellen

This color-coded teacher's guide contains curriculum materials designed to give students an awareness of various desktop publishing techniques before they determine their computer hardware and software needs. The guide contains six units, each of which includes some or all of the following basic components: objective sheet, suggested activities…

Desktop publishing: a useful tool for scientists.

PubMed

Lindroth, J R; Cooper, G; Kent, R L

1994-01-01

Desktop publishing offers features that are not available in word processing programs. The process yields an impressive and professional-looking document that is legible and attractive. It is a simple but effective tool to enhance the quality and appearance of your work and perhaps also increase your productivity.

Teaching Documentation Writing: What Else Students--And Instructors--Should Know.

ERIC Educational Resources Information Center

Boiarsky, Carolyn; Dobberstein, Michael

1998-01-01

Discusses the knowledge, problem-solving strategies, and desktop publishing skills students need to learn about documentation writing. Describes a course developed by the authors that provides these skills, focusing on strategies for problem solving, user analysis, conventions, document design and desktop publishing, and using authentic…

Desktop Publishing: Its Impact on Community College Journalism.

ERIC Educational Resources Information Center

Grzywacz-Gray, John; And Others

1987-01-01

Illustrates the kinds of copy that can be created on Apple Macintosh computers and laser printers. Shows font and type specification options. Discusses desktop publishing costs, potential problems, and computer compatibility. Considers the use of computers in college journalism in production, graphics, accounting, advertising, and promotion. (AYC)

Desktop Virtualization in Action: Simplicity Is Power

ERIC Educational Resources Information Center

Fennell, Dustin

2010-01-01

Discover how your institution can better manage and increase access to instructional applications and desktops while providing a blended learning environment. Receive practical insight into how academic computing virtualization can be leveraged to enhance education at your institution while lowering Total Cost of Ownership (TCO) and reducing the…

Video Conferencing: The Next Wave for International Business Communication.

ERIC Educational Resources Information Center

Sondak, Norman E.; Sondak, Eileen M.

This paper suggests that desktop computer-based video conferencing, with high fidelity sound, and group software support, is emerging as a major communications option. Briefly addressed are the following critical factors that are propelling the computer-based video conferencing revolution: (1) widespread availability of desktop computers…

Vertigo in virtual reality with haptics: case report.

PubMed

Viirre, Erik; Ellisman, Mark

2003-08-01

A researcher was working with a desktop virtual environment system. The system was displaying vector fields of a cyclonic weather system, and the system incorporated a haptic display of the forces in the cyclonic field. As the subject viewed the rotating cyclone field, they would move a handle "through" the representation of the moving winds and "feel" the forces buffeting the handle as it moved. Stopping after using the system for about 10 min, the user experienced an immediate sensation of postural instability for several minutes. Several hours later, there was the onset of vertigo with head turns. This vertigo lasted several hours and was accompanied with nausea and motion illusions that exacerbated by head movements. Symptoms persisted mildly the next day and were still present the third and fourth day, but by then were only provoked by head movements. There were no accompanying symptoms or history to suggest an inner ear disorder. Physical examination of inner ear and associated neurologic function was normal. No other users of this system have reported similar symptoms. This case suggests that some individuals may be susceptible to the interaction of displays with motion and movement forces and as a result experience motion illusions. Operators of such systems should be aware of this potential and minimize exposure if vertigo occurs.

Life cycle thinking and assessment tools on environmentally-benign electronics: Convergent optimization of materials use, end-of-life strategy and environmental policies

NASA Astrophysics Data System (ADS)

Zhou, Xiaoying

The purpose of this study is to integrate the quantitative environmental performance assessment tools and the theory of multi-objective optimization within the boundary of electronic product systems to support the selection among design alternatives in terms of environmental impact, technical criteria, and economic feasibility. To meet with the requirements that result from emerging environmental legislation targeting electronics products, the research addresses an important analytical methodological approach to facilitate environmentally conscious design and end-of-life management with a life cycle viewpoint. A synthesis of diverse assessment tools is applied on a set of case studies: lead-free solder materials selection, cellular phone design, and desktop display technology assessment. In the first part of this work, an in-depth industrial survey of the status and concerns of the U.S. electronics industry on the elimination of lead (Pb) in solders is described. The results show that the trade-offs among environmental consequences, technology challenges, business risks, legislative compliance and stakeholders' preferences must be explicitly, simultaneously, and systematically addressed in the decision-making process used to guide multi-faceted planning of environmental solutions. In the second part of this work, the convergent optimization of the technical cycle, economic cycle and environmental cycle is addressed in a coherent and systematic way using the application of environmentally conscious design of cellular phones. The technical understanding of product structure, components analysis, and materials flow facilitates the development of "Design for Disassembly" guidelines. A bottom-up disassembly analysis on a "bill of materials" based structure at a micro-operational level is utilized to select optimal end-of-life strategies on the basis of economic feasibility. A macro-operational level life cycle model is used to investigate the environmental consequences linking environmental impact with the cellular phone production activities focusing on the upstream manufacturing and end-of-life life cycle stages. The last part of this work, the quantitative elicitation of weighting factors facilitates the comparison of trade-offs in the context of a multi-attribute problem. An integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), is proposed to assess alternatives at the design phase of a product system and is validated with the assessment of desktop display technologies and lead-free solder alternatives.

Assessing land-use impacts on biodiversity using an expert systems tool

USGS Publications Warehouse

Crist, P.J.; Kohley, T.W.; Oakleaf, J.

2000-01-01

Habitat alteration, in the form of land-use development, is a leading cause of biodiversity loss in the U.S. and elsewhere. Although statutes in the U.S. may require consideration of biodiversity in local land-use planning and regulation, local governments lack the data, resources, and expertise to routinely consider biotic impacts that result from permitted land uses. We hypothesized that decision support systems could aid solution of this problem. We developed a pilot biodiversity expert systems tool (BEST) to test that hypothesis and learn what additional scientific and technological advancements are required for broad implementation of such a system. BEST uses data from the U.S. Geological Survey's Gap Analysis Program (GAP) and other data in a desktop GIS environment. The system provides predictions of conflict between proposed land uses and biotic elements and is intended for use at the start of the development review process. Key challenges were the development of categorization systems that relate named land-use types to ecological impacts, and relate sensitivities of biota to ecological impact levels. Although the advent of GAP and sophisticated desktop GIS make such a system feasible for broad implementation, considerable ongoing research is required to make the results of such a system scientifically sound, informative, and reliable for the regulatory process. We define a role for local government involvement in biodiversity impact assessment, the need for a biodiversity decision support system, the development of a prototype system, and scientific needs for broad implementation of a robust and reliable system.

Orientation and metacognition in virtual space.

PubMed

Tenbrink, Thora; Salwiczek, Lucie H

2016-05-01

Cognitive scientists increasingly use virtual reality scenarios to address spatial perception, orientation, and navigation. If based on desktops rather than mobile immersive environments, this involves a discrepancy between the physically experienced static position and the visually perceived dynamic scene, leading to cognitive challenges that users of virtual worlds may or may not be aware of. The frequently reported loss of orientation and worse performance in point-to-origin tasks relate to the difficulty of establishing a consistent reference system on an allocentric or egocentric basis. We address the verbalizability of spatial concepts relevant in this regard, along with the conscious strategies reported by participants. Behavioral and verbal data were collected using a perceptually sparse virtual tunnel scenario that has frequently been used to differentiate between humans' preferred reference systems. Surprisingly, the linguistic data we collected relate to reference system verbalizations known from the earlier literature only to a limited extent, but instead reveal complex cognitive mechanisms and strategies. Orientation in desktop virtual reality appears to pose considerable challenges, which participants react to by conceptualizing the task in individual ways that do not systematically relate to the generic concepts of egocentric and allocentric reference frames. (c) 2016 APA, all rights reserved).

Video control system for a drilling in furniture workpiece

NASA Astrophysics Data System (ADS)

Khmelev, V. L.; Satarov, R. N.; Zavyalova, K. V.

2018-05-01

During last 5 years, Russian industry has being starting to be a robotic, therefore scientific groups got new tasks. One of new tasks is machine vision systems, which should solve problem of automatic quality control. This type of systems has a cost of several thousand dollars each. The price is impossible for regional small business. In this article, we describe principle and algorithm of cheap video control system, which one uses web-cameras and notebook or desktop computer as a computing unit.

Searching on the Run

ERIC Educational Resources Information Center

Tenopir, Carol

2004-01-01

With wireless connectivity and small laptop computers, people are no longer tied to the desktop for online searching. Handheld personal digital assistants (PDAs) offer even greater portability. So far, the most common uses of PDAs are as calendars and address books, or to interface with a laptop or desktop machine. More advanced PDAs, like…

Integrated Services Digital Networks: How It Can Be Used for Distance Education.

ERIC Educational Resources Information Center

Saba, Farhad; Twitchell, David

1989-01-01

Describes Integrated Services Digital Networks (ISDN), which, combined with desktop workstations, will provide access to voice, text, and video telecommunications. Telecommunications technology is discussed, the use of desktop workstations to facilitate ISDN is described, and possible future uses of ISDN technology in distance education are…

Desktop Publishing: Probable Effects on University Extension.

ERIC Educational Resources Information Center

Misanchuk, Earl R.

Desktop publishing (DTP) could potentially become a powerful, relatively inexpensive tool for use in university extension activities. This paper describes and explains the characteristics of DTP and examines its effects on university extension. In addition, it outlines the kind of hardware, software, and skills needed and costs; describes new…

Designing Design into an Advanced Desktop Publishing Course (A Teaching Tip).

ERIC Educational Resources Information Center

Guthrie, Jim

1995-01-01

Describes an advanced desktop publishing course that combines instruction in a few advanced techniques for using software with extensive discussion of such design principles as consistency, proportion, asymmetry, appropriateness, contrast, and color. Describes computer hardware and software, class assignments, problems, and the rationale for such…

Desktop Publishing on the Macintosh: A Software Perspective.

ERIC Educational Resources Information Center

Devan, Steve

1987-01-01

Discussion of factors to be considered in selecting desktop publishing software for the Macintosh microcomputer focuses on the two approaches to such software, i.e., batch and interactive, and three technical considerations, i.e., document, text, and graphics capabilities. Some new developments in graphics software are also briefly described. (MES)

Using Desktop Publishing To Enhance the "Writing Process."

ERIC Educational Resources Information Center

Millman, Patricia G.; Clark, Margaret P.

1997-01-01

Describes the development of an instructional technology course at Fairmont State College (West Virginia) for education majors that included a teaching module combining steps of the writing process to provide for the interdisciplinary focus of writing across the curriculum. Discusses desktop publishing, the National Writing Project, and student…

A Real-World Project for a Desktop Publishing Course.

ERIC Educational Resources Information Center

Marsden, James D.

1994-01-01

Describes a project in a desktop publishing course in which students work with nonprofit and campus organizations to design brochures that fulfill important needs. Discusses specific tools students use. Describes the brochure project, project criteria, clients, text and graphics for the project, how to evaluate the project, and guidelines for…

Desktop Publishing in the University: Current Progress, Future Visions.

ERIC Educational Resources Information Center

Smith, Thomas W.

1989-01-01

Discussion of the workflow involved in desktop publishing focuses on experiences at the College of Engineering at the University of Wisconsin at Madison. Highlights include cost savings and productivity gains in page layout and composition; editing, translation, and revision issues; printing and distribution; and benefits to the reader. (LRW)

Desktop Publishing in the University.

ERIC Educational Resources Information Center

Burstyn, Joan N., Ed.

Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

Integrating Transportation Modeling and Desktop GIS: A Practical and Affordable Analysis Tool for Small and Medium Sized Communities

DOT National Transportation Integrated Search

1998-09-16

This paper and presentation discuss some of the benefits of integrating travel : demand models and desktop GIS (ArchInfo and ArcView for PCs) as a : cost-effective and staff saving tool, as well as specific improvements to : transportation planning m...

WEB-BASED MODELING OF A FERTILIZER SOLUTION SPILL IN THE OHIO RIVER

EPA Science Inventory

Environmental computer models are usually desktop models. Some web-enabled models are beginning to appear where the user can use a browser to run the models on a central web server. Several issues arise when a desktop model is transferred to a web architecture. This paper discuss...

High Resolution Displays In The Apple Macintosh And IBM PC Environments

NASA Astrophysics Data System (ADS)

Winegarden, Steven

1989-07-01

High resolution displays are one of the key elements that distinguish user oriented document finishing or publishing stations. A number of factors have been involved in bringing these to the desktop environment. At Sigma Designs we have concentrated on enhancing the capabilites of IBM PCs and compatibles and Apple Macintosh computer systems.

The Next Linear Collider Program

Science.gov Websites

posted to the new SLAC ILC web site http://www-project.slac.stanford.edu/ilc/. Also, see the new site for . The NLC web site will remain accessible as an archive of important work done on the many systems | Navbar || || Documentation | NLC Playpen | Web Comments & Suggestions | Desktop Trouble Call | LC

Reading, Writing, and Documentation and Managing the Development of User Documentation.

ERIC Educational Resources Information Center

Lindberg, Wayne; Hoffman, Terrye

1987-01-01

The first of two articles addressing the issue of user documentation for computer software discusses the need to teach users how to read documentation. The second presents a guide for writing documentation that is based on the instructional systems design model, and makes suggestions for the desktop publishing of user manuals. (CLB)

SysBioCube: A Data Warehouse and Integrative Data Analysis Platform Facilitating Systems Biology Studies of Disorders of Military Relevance

DTIC Science & Technology

2013-12-18

include interactive gene and methylation profiles, interactive heatmaps, cytoscape network views, integrative genomics viewer ( IGV ), and protein-protein...single chart. The website also provides an option to include multiple genes. Integrative Genomics Viewer ( IGV )1, is a high-performance desktop tool for

New Support for the Research Process: Desktop Delivery of Microform Content

ERIC Educational Resources Information Center

Weare, William H., Jr.

2011-01-01

While trying to access microform content, patrons at the Christopher Center for Library and Information Resources at Valparaiso University were often hampered by unfamiliar equipment, temperamental software, and a puzzling file management system. In an effort to address these problems, the Access Services Department launched a pilot program for…

Help for the Help Desk: School District Technology Managers Learn to Do with Less.

ERIC Educational Resources Information Center

Kongshem, Lars

2001-01-01

Although the E-Rate has been a catalyst for school technology purchases, there are no subsidies for hiring qualified technology support staff. District technology coordinators are relying on technology support systems and shoestring survival strategies, employing standardized equipment and hard-drive configurations, desktop lockdowns, anti-virus…

Desktop Social Science: Coming of Age.

ERIC Educational Resources Information Center

Dwyer, David C.; And Others

Beginning in 1985, Apple Computer, Inc. and several school districts began a collaboration to examine the impact of intensive computer use on instruction and learning in K-12 classrooms. This paper follows the development of a Macintosh II-based management and retrieval system for text data undertaken to store and retrieve oral reflections of…

Addressing the English Language Arts Technology Standard in a Secondary Reading Methodology Course.

ERIC Educational Resources Information Center

Merkley, Donna J.; Schmidt, Denise A.; Allen, Gayle

2001-01-01

Describes efforts to integrate technology into a reading methodology course for secondary English majors. Discusses the use of e-mail, multimedia, distance education for videoconferences, online discussion technology, subject-specific software, desktop publishing, a database management system, a concept mapping program, and the use of the World…

EBOOK.EXE: A Desktop Authoring Tool for HURAA.

ERIC Educational Resources Information Center

Hu, Xiangen; Mathews, Eric; Graesser, Arthur C.; Susarla, Suresh

The development of authoring tools for intelligent systems is an important step for creating, maintaining, and structuring content in a quick and easy manner. It has the benefit of allowing for a rapid change to new domains or topics for tutoring. The development of such tools requires functional control, access protection, ease of learning, and…

Centrifuge: rapid and sensitive classification of metagenomic sequences

PubMed Central

Song, Li; Breitwieser, Florian P.

2016-01-01

Centrifuge is a novel microbial classification engine that enables rapid, accurate, and sensitive labeling of reads and quantification of species on desktop computers. The system uses an indexing scheme based on the Burrows-Wheeler transform (BWT) and the Ferragina-Manzini (FM) index, optimized specifically for the metagenomic classification problem. Centrifuge requires a relatively small index (4.2 GB for 4078 bacterial and 200 archaeal genomes) and classifies sequences at very high speed, allowing it to process the millions of reads from a typical high-throughput DNA sequencing run within a few minutes. Together, these advances enable timely and accurate analysis of large metagenomics data sets on conventional desktop computers. Because of its space-optimized indexing schemes, Centrifuge also makes it possible to index the entire NCBI nonredundant nucleotide sequence database (a total of 109 billion bases) with an index size of 69 GB, in contrast to k-mer-based indexing schemes, which require far more extensive space. PMID:27852649

Mobile Multi-System Overview

NASA Technical Reports Server (NTRS)

Witoff, Robert J.; Doody, David F.

2012-01-01

At the time of this reporting, there are 2,589 rich mobile devices used at JPL, including 1,550 iPhones and 968 Blackberrys. Considering a total JPL population of 5,961 employees, mobile applications have a total addressable market of 43 percent of the employees at JPL, and that number is rising. While it was found that no existing desktop tools can realistically be replaced by a mobile application, there is certainly a need to improve access to these desktop tools. When an alarm occurs and an engineer is away from his desk, a convenient means of accessing relevant data can save an engineer a great deal of time and improve his job efficiency. To identify which data is relevant, an engineer benefits from a succinct overview of the data housed in 13+ tools. This need can be well met by a single, rich, mobile application that provides access to desired data across tools in the ops infrastructure.

Lsiviewer 2.0 - a Client-Oriented Online Visualization Tool for Geospatial Vector Data

NASA Astrophysics Data System (ADS)

Manikanta, K.; Rajan, K. S.

2017-09-01

Geospatial data visualization systems have been predominantly through applications that are installed and run in a desktop environment. Over the last decade, with the advent of web technologies and its adoption by Geospatial community, the server-client model for data handling, data rendering and visualization respectively has been the most prevalent approach in Web-GIS. While the client devices have become functionally more powerful over the recent years, the above model has largely ignored it and is still in a mode of serverdominant computing paradigm. In this paper, an attempt has been made to develop and demonstrate LSIViewer - a simple, easy-to-use and robust online geospatial data visualisation system for the user's own data that harness the client's capabilities for data rendering and user-interactive styling, with a reduced load on the server. The developed system can support multiple geospatial vector formats and can be integrated with other web-based systems like WMS, WFS, etc. The technology stack used to build this system is Node.js on the server side and HTML5 Canvas and JavaScript on the client side. Various tests run on a range of vector datasets, upto 35 MB, showed that the time taken to render the vector data using LSIViewer is comparable to a desktop GIS application, QGIS, over an identical system.

Design and implementation of handheld and desktop software for the structured reporting of hepatic masses using the LI-RADS schema.

PubMed

Clark, Toshimasa J; McNeeley, Michael F; Maki, Jeffrey H

2014-04-01

The Liver Imaging Reporting and Data System (LI-RADS) can enhance communication between radiologists and clinicians if applied consistently. We identified an institutional need to improve liver imaging report standardization and developed handheld and desktop software to serve this purpose. We developed two complementary applications that implement the LI-RADS schema. A mobile application for iOS devices written in the Objective-C language allows for rapid characterization of hepatic observations under a variety of circumstances. A desktop application written in the Java language allows for comprehensive observation characterization and standardized report text generation. We chose the applications' languages and feature sets based on the computing resources of target platforms, anticipated usage scenarios, and ease of application installation, deployment, and updating. Our primary results are the publication of the core source code implementing the LI-RADS algorithm and the availability of the applications for use worldwide via our website, http://www.liradsapp.com/. The Java application is free open-source software that can be integrated into nearly any vendor's reporting system. The iOS application is distributed through Apple's iTunes App Store. Observation categorizations of both programs have been manually validated to be correct. The iOS application has been used to characterize liver tumors during multidisciplinary conferences of our institution, and several faculty members, fellows, and residents have adopted the generated text of Java application into their diagnostic reports. Although these two applications were developed for the specific reporting requirements of our liver tumor service, we intend to apply this development model to other diseases as well. Through semiautomated structured report generation and observation characterization, we aim to improve patient care while increasing radiologist efficiency. Published by Elsevier Inc.

An interactive physics-based unmanned ground vehicle simulator leveraging open source gaming technology: progress in the development and application of the virtual autonomous navigation environment (VANE) desktop

NASA Astrophysics Data System (ADS)

Rohde, Mitchell M.; Crawford, Justin; Toschlog, Matthew; Iagnemma, Karl D.; Kewlani, Guarav; Cummins, Christopher L.; Jones, Randolph A.; Horner, David A.

2009-05-01

It is widely recognized that simulation is pivotal to vehicle development, whether manned or unmanned. There are few dedicated choices, however, for those wishing to perform realistic, end-to-end simulations of unmanned ground vehicles (UGVs). The Virtual Autonomous Navigation Environment (VANE), under development by US Army Engineer Research and Development Center (ERDC), provides such capabilities but utilizes a High Performance Computing (HPC) Computational Testbed (CTB) and is not intended for on-line, real-time performance. A product of the VANE HPC research is a real-time desktop simulation application under development by the authors that provides a portal into the HPC environment as well as interaction with wider-scope semi-automated force simulations (e.g. OneSAF). This VANE desktop application, dubbed the Autonomous Navigation Virtual Environment Laboratory (ANVEL), enables analysis and testing of autonomous vehicle dynamics and terrain/obstacle interaction in real-time with the capability to interact within the HPC constructive geo-environmental CTB for high fidelity sensor evaluations. ANVEL leverages rigorous physics-based vehicle and vehicle-terrain interaction models in conjunction with high-quality, multimedia visualization techniques to form an intuitive, accurate engineering tool. The system provides an adaptable and customizable simulation platform that allows developers a controlled, repeatable testbed for advanced simulations. ANVEL leverages several key technologies not common to traditional engineering simulators, including techniques from the commercial video-game industry. These enable ANVEL to run on inexpensive commercial, off-the-shelf (COTS) hardware. In this paper, the authors describe key aspects of ANVEL and its development, as well as several initial applications of the system.

Tactical Action Officer Intelligent Tutoring System (TAO ITS)

DTIC Science & Technology

2006-01-01

scenario. As well as the intrinsic feedback that free - play simulations naturally provide a student, the TAO ITS provides detailed, useful extrinsic feedback...incorporate use of free - play simulators into their curriculum, affordably. This is a major shortcoming of conventional CBT as student manipulation of...tutoring systems are ideal for incorporating desktop free - play simulators into computer-based training since the software can stand in for a human

A Remote PLC Laboratory (RLab) for Distance Practical Work of Industrial Automation

NASA Astrophysics Data System (ADS)

Haritman, E.; Somantri, Y.; Wahyudin, D.; Mulyana, E.

2018-02-01

A laboratory is an essential equipment for engineering students to do a useful practical work. Therefore, universities should provide an adequate facility for practical work. On the other hand, industrial automation laboratory would offer students beneficial experience by using various educational PLC kits. This paper describes the development of Web-based Programmable Logic Controller (PLC) remote laboratory called RLab. It provides an environment for learners to study PLC application to control the level of the non-interacting tank. The RLab architecture is based on a Moodle and Remote Desktop, which also manages the booking system of the schedule of practical work in the laboratory. The RLab equipped by USB cameras providing a real-time view of PLC environment. To provide a secured system, the RLab combines Moodle and Remote Desktop application for the authentication system and management of remote users. Moodle will send PartnerID and password to connect to TeamViewer. It has been examined that the laboratory requirement, time and flexibility restrictions constitute a significant obstacle facing traditional students desiring to finish the course. A remote access laboratory can be eliminating time and flexibility restrictions. The preliminary study of RLab usability proved that such system is adequate to give the learners a distance practical work environment.

A Web-Remote/Robotic/Scheduled Astronomical Data Acquisition System

NASA Astrophysics Data System (ADS)

Denny, Robert

2011-03-01

Traditionally, remote/robotic observatory operating systems have been custom made for each observatory. While data reduction pipelines need to be tailored for each investigation, the data acquisition process (especially for stare-mode optical images) is often quite similar across investigations. Since 1999, DC-3 Dreams has focused on providing and supporting a remote/robotic observatory operating system which can be adapted to a wide variety of physical hardware and optics while achieving the highest practical observing efficiency and safe/secure web browser user controls. ACP Expert consists of three main subsystems: (1) a robotic list-driven data acquisition engine which controls all aspects of the observatory, (2) a constraint-driven dispatch scheduler with a long-term database of requests, and (3) a built-in "zero admin" web server and dynamic web pages which provide a remote capability for immediate execution and monitoring as well as entry and monitoring of dispatch-scheduled observing requests. No remote desktop login is necessary for observing, thus keeping the system safe and consistent. All routine operation is via the web browser. A wide variety of telescope mounts, CCD imagers, guiding sensors, filter selectors, focusers, instrument-package rotators, weather sensors, and dome control systems are supported via the ASCOM standardized device driver architecture. The system is most commonly employed on commercial 1-meter and smaller observatories used by universities and advanced amateurs for both science and art. One current project, the AAVSO Photometric All-Sky Survey (APASS), uses ACP Expert to acquire large volumes of data in dispatch-scheduled mode. In its first 18 months of operation (North then South), 40,307 sky images were acquired in 117 photometric nights, resulting in 12,107,135 stars detected two or more times. These stars had measures in 5 filters. The northern station covered 754 fields (6446 square degrees) at least twice, the southern station covered 951 fields (8500 square degrees) at least twice. The database of photometric calibrations is available from AAVSO. The paper will cover the ACP web interface, including the use of AJAX and JSON within a micro-content framework, as well as dispatch scheduler and acquisition engine operation.

Design and development of an automated, portable and handheld tablet personal computer-based data acquisition system for monitoring electromyography signals during rehabilitation.

PubMed

Ahamed, Nizam U; Sundaraj, Kenneth; Poo, Tarn S

2013-03-01

This article describes the design of a robust, inexpensive, easy-to-use, small, and portable online electromyography acquisition system for monitoring electromyography signals during rehabilitation. This single-channel (one-muscle) system was connected via the universal serial bus port to a programmable Windows operating system handheld tablet personal computer for storage and analysis of the data by the end user. The raw electromyography signals were amplified in order to convert them to an observable scale. The inherent noise of 50 Hz (Malaysia) from power lines electromagnetic interference was then eliminated using a single-hybrid IC notch filter. These signals were sampled by a signal processing module and converted into 24-bit digital data. An algorithm was developed and programmed to transmit the digital data to the computer, where it was reassembled and displayed in the computer using software. Finally, the following device was furnished with the graphical user interface to display the online muscle strength streaming signal in a handheld tablet personal computer. This battery-operated system was tested on the biceps brachii muscles of 20 healthy subjects, and the results were compared to those obtained with a commercial single-channel (one-muscle) electromyography acquisition system. The results obtained using the developed device when compared to those obtained from a commercially available physiological signal monitoring system for activities involving muscle contractions were found to be comparable (the comparison of various statistical parameters) between male and female subjects. In addition, the key advantage of this developed system over the conventional desktop personal computer-based acquisition systems is its portability due to the use of a tablet personal computer in which the results are accessible graphically as well as stored in text (comma-separated value) form.

Clearing your Desk! Software and Data Services for Collaborative Web Based GIS Analysis

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Idaszak, R.; Horsburgh, J. S.; Ames, D. P.; Goodall, J. L.; Band, L. E.; Merwade, V.; Couch, A.; Hooper, R. P.; Maidment, D. R.; Dash, P. K.; Stealey, M.; Yi, H.; Gan, T.; Gichamo, T.; Yildirim, A. A.; Liu, Y.

2015-12-01

Can your desktop computer crunch the large GIS datasets that are becoming increasingly common across the geosciences? Do you have access to or the know-how to take advantage of advanced high performance computing (HPC) capability? Web based cyberinfrastructure takes work off your desk or laptop computer and onto infrastructure or "cloud" based data and processing servers. This talk will describe the HydroShare collaborative environment and web based services being developed to support the sharing and processing of hydrologic data and models. HydroShare supports the upload, storage, and sharing of a broad class of hydrologic data including time series, geographic features and raster datasets, multidimensional space-time data, and other structured collections of data. Web service tools and a Python client library provide researchers with access to HPC resources without requiring them to become HPC experts. This reduces the time and effort spent in finding and organizing the data required to prepare the inputs for hydrologic models and facilitates the management of online data and execution of models on HPC systems. This presentation will illustrate the use of web based data and computation services from both the browser and desktop client software. These web-based services implement the Terrain Analysis Using Digital Elevation Model (TauDEM) tools for watershed delineation, generation of hydrology-based terrain information, and preparation of hydrologic model inputs. They allow users to develop scripts on their desktop computer that call analytical functions that are executed completely in the cloud, on HPC resources using input datasets stored in the cloud, without installing specialized software, learning how to use HPC, or transferring large datasets back to the user's desktop. These cases serve as examples for how this approach can be extended to other models to enhance the use of web and data services in the geosciences.

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part II

NASA Technical Reports Server (NTRS)

Crasner, Aaron I.; Scola,Salvatore; Beyon, Jeffrey Y.; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Thermal modeling software was used to run steady state thermal analyses, which were used to both validate the designs and recommend further changes. Analyses were run on each redesign, as well as the original system. Thermal Desktop was used to run trade studies to account for uncertainty and assumptions about fan performance and boundary conditions. The studies suggested that, even if the assumptions were significantly wrong, the redesigned systems would remain within operating temperature limits.

Parallelization of a spatial random field characterization process using the Method of Anchored Distributions and the HTCondor high throughput computing system

NASA Astrophysics Data System (ADS)

Osorio-Murillo, C. A.; Over, M. W.; Frystacky, H.; Ames, D. P.; Rubin, Y.

2013-12-01

A new software application called MAD# has been coupled with the HTCondor high throughput computing system to aid scientists and educators with the characterization of spatial random fields and enable understanding the spatial distribution of parameters used in hydrogeologic and related modeling. MAD# is an open source desktop software application used to characterize spatial random fields using direct and indirect information through Bayesian inverse modeling technique called the Method of Anchored Distributions (MAD). MAD relates indirect information with a target spatial random field via a forward simulation model. MAD# executes inverse process running the forward model multiple times to transfer information from indirect information to the target variable. MAD# uses two parallelization profiles according to computational resources available: one computer with multiple cores and multiple computers - multiple cores through HTCondor. HTCondor is a system that manages a cluster of desktop computers for submits serial or parallel jobs using scheduling policies, resources monitoring, job queuing mechanism. This poster will show how MAD# reduces the time execution of the characterization of random fields using these two parallel approaches in different case studies. A test of the approach was conducted using 1D problem with 400 cells to characterize saturated conductivity, residual water content, and shape parameters of the Mualem-van Genuchten model in four materials via the HYDRUS model. The number of simulations evaluated in the inversion was 10 million. Using the one computer approach (eight cores) were evaluated 100,000 simulations in 12 hours (10 million - 1200 hours approximately). In the evaluation on HTCondor, 32 desktop computers (132 cores) were used, with a processing time of 60 hours non-continuous in five days. HTCondor reduced the processing time for uncertainty characterization by a factor of 20 (1200 hours reduced to 60 hours.)

Enhancements to TauDEM to support Rapid Watershed Delineation Services

NASA Astrophysics Data System (ADS)

Sazib, N. S.; Tarboton, D. G.

2015-12-01

Watersheds are widely recognized as the basic functional unit for water resources management studies and are important for a variety of problems in hydrology, ecology, and geomorphology. Nevertheless, delineating a watershed spread across a large region is still cumbersome due to the processing burden of working with large Digital Elevation Model. Terrain Analysis Using Digital Elevation Models (TauDEM) software supports the delineation of watersheds and stream networks from within desktop Geographic Information Systems. A rich set of watershed and stream network attributes are computed. However limitations of the TauDEM desktop tools are (1) it supports only one type of raster (tiff format) data (2) requires installation of software for parallel processing, and (3) data have to be in projected coordinate system. This paper presents enhancements to TauDEM that have been developed to extend its generality and support web based watershed delineation services. The enhancements of TauDEM include (1) reading and writing raster data with the open-source geospatial data abstraction library (GDAL) not limited to the tiff data format and (2) support for both geographic and projected coordinates. To support web services for rapid watershed delineation a procedure has been developed for sub setting the domain based on sub-catchments, with preprocessed data prepared for each catchment stored. This allows the watershed delineation to function locally, while extending to the full extent of watersheds using preprocessed information. Additional capabilities of this program includes computation of average watershed properties and geomorphic and channel network variables such as drainage density, shape factor, relief ratio and stream ordering. The updated version of TauDEM increases the practical applicability of it in terms of raster data type, size and coordinate system. The watershed delineation web service functionality is useful for web based software as service deployments that alleviate the need for users to install and work with desktop GIS software.

Ecohydrologic coevolution in drylands: relative roles of vegetation, soil depth and runoff connectivity on ecosystem shifts.

NASA Astrophysics Data System (ADS)

Saco, P. M.; Moreno de las Heras, M.; Willgoose, G. R.

2014-12-01

Watersheds are widely recognized as the basic functional unit for water resources management studies and are important for a variety of problems in hydrology, ecology, and geomorphology. Nevertheless, delineating a watershed spread across a large region is still cumbersome due to the processing burden of working with large Digital Elevation Model. Terrain Analysis Using Digital Elevation Models (TauDEM) software supports the delineation of watersheds and stream networks from within desktop Geographic Information Systems. A rich set of watershed and stream network attributes are computed. However limitations of the TauDEM desktop tools are (1) it supports only one type of raster (tiff format) data (2) requires installation of software for parallel processing, and (3) data have to be in projected coordinate system. This paper presents enhancements to TauDEM that have been developed to extend its generality and support web based watershed delineation services. The enhancements of TauDEM include (1) reading and writing raster data with the open-source geospatial data abstraction library (GDAL) not limited to the tiff data format and (2) support for both geographic and projected coordinates. To support web services for rapid watershed delineation a procedure has been developed for sub setting the domain based on sub-catchments, with preprocessed data prepared for each catchment stored. This allows the watershed delineation to function locally, while extending to the full extent of watersheds using preprocessed information. Additional capabilities of this program includes computation of average watershed properties and geomorphic and channel network variables such as drainage density, shape factor, relief ratio and stream ordering. The updated version of TauDEM increases the practical applicability of it in terms of raster data type, size and coordinate system. The watershed delineation web service functionality is useful for web based software as service deployments that alleviate the need for users to install and work with desktop GIS software.

E-2633

NASA Image and Video Library

1956-10-12

A photo of the control stick used on the Iron Cross Attitude Simulator. Although it resembled today's desktop computer flight sticks, its operation was different. As with a standard control stick, moving it back and forth raised and lowered the nose resulting in changes in pitch. Moving the stick to the right or left raised or lowered the wing, resulted in changes in roll. This control stick had a third axis, not found in standard control sticks. Twisting the stick to the right or left caused the airplane's nose to move horizontally in the same direction, resulting in changes in yaw.

Concierge: Personal Database Software for Managing Digital Research Resources

PubMed Central

Sakai, Hiroyuki; Aoyama, Toshihiro; Yamaji, Kazutsuna; Usui, Shiro

2007-01-01

This article introduces a desktop application, named Concierge, for managing personal digital research resources. Using simple operations, it enables storage of various types of files and indexes them based on content descriptions. A key feature of the software is a high level of extensibility. By installing optional plug-ins, users can customize and extend the usability of the software based on their needs. In this paper, we also introduce a few optional plug-ins: literature management, electronic laboratory notebook, and XooNlps client plug-ins. XooNIps is a content management system developed to share digital research resources among neuroscience communities. It has been adopted as the standard database system in Japanese neuroinformatics projects. Concierge, therefore, offers comprehensive support from management of personal digital research resources to their sharing in open-access neuroinformatics databases such as XooNIps. This interaction between personal and open-access neuroinformatics databases is expected to enhance the dissemination of digital research resources. Concierge is developed as an open source project; Mac OS X and Windows XP versions have been released at the official site (http://concierge.sourceforge.jp). PMID:18974800

Adaptive optics compensation over a 3 km near horizontal path

NASA Astrophysics Data System (ADS)

Mackey, Ruth; Dainty, Chris

2008-10-01

We present results of adaptive optics compensation at the receiver of a 3km optical link using a beacon laser operating at 635nm. The laser is transmitted from the roof of a seven-storey building over a near horizontal path towards a 127 mm optical receiver located on the second-floor of the Applied Optics Group at the National University of Ireland, Galway. The wavefront of the scintillated beam is measured using a Shack-Hartmann wavefront sensor (SHWFS) with high-speed CMOS camera capable of frame rates greater than 1kHz. The strength of turbulence is determined from the fluctuations in differential angle-of-arrival in the wavefront sensor measurements and from the degree of scintillation in the pupil plane. Adaptive optics compensation is applied using a tip-tilt mirror and 37 channel membrane mirror and controlled using a single desktop computer. The performance of the adaptive optics system in real turbulence is compared with the performance of the system in a controlled laboratory environment, where turbulence is generated using a liquid crystal spatial light modulator.

77 FR 14523 - Western Digital Corporation; Analysis of Agreement Containing Consent Order to Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... of Viviti Technologies Ltd., formerly known as Hitachi Global Storage Technologies Ltd. (``HGST''), a... negotiate the purchase price of desktop HDDs at a global level. The desktop HDD market is highly... Digital'') proposed acquisition of Viviti Technologies Ltd., formerly known as Hitachi Global Storage...

Generating Alternative Engineering Designs by Integrating Desktop VR with Genetic Algorithms

ERIC Educational Resources Information Center

Chandramouli, Magesh; Bertoline, Gary; Connolly, Patrick

2009-01-01

This study proposes an innovative solution to the problem of multiobjective engineering design optimization by integrating desktop VR with genetic computing. Although, this study considers the case of construction design as an example to illustrate the framework, this method can very much be extended to other engineering design problems as well.…

An Exercise in Desktop Publishing: Using the "Newsroom."

ERIC Educational Resources Information Center

Kiteka, Sebastian F.

This guide provides a description and step-by-step instructions for the use of "Newsroom," a desktop-publishing program for the Apple II series of microcomputers produced by Springboard Software Inc. Based on the 1984 version of the program, this two-hour exercise focuses on the design and production of a newsletter with text and…

Meaning-Making in Online Language Learner Interactions via Desktop Videoconferencing

ERIC Educational Resources Information Center

Satar, H. Müge

2016-01-01

Online language learning and teaching in multimodal contexts has been identified as one of the key research areas in computer-aided learning (CALL) (Lamy, 2013; White, 2014). This paper aims to explore meaning-making in online language learner interactions via desktop videoconferencing (DVC) and in doing so illustrate multimodal transcription and…

Designing for Communication: The Key to Successful Desktop Publishing.

ERIC Educational Resources Information Center

McCain, Ted D. E.

Written for those who are new to design and page layout, this book focuses on providing novice desktop publishers with an understanding of communication, graphic design, typography, page layout, and page layout techniques. The book also discusses how people read, design as a consequence of understanding, and the principles of page layout. Chapters…

What's New in Software? Mastery of the Computer through Desktop Publishing.

ERIC Educational Resources Information Center

Hedley, Carolyn N.; Ellsworth, Nancy J.

1993-01-01

Offers thoughts on the phenomenon of the underuse of classroom computers. Argues that desktop publishing is one way of overcoming the computer malaise occurring in schools, using the incentive of classroom reading and writing for mastery of many aspects of computer production, including writing, illustrating, reading, and publishing. (RS)

Desktop Publishing: The Effects of Computerized Formats on Reading Speed and Comprehension.

ERIC Educational Resources Information Center

Knupfer, Nancy Nelson; McIsaac, Marina Stock

1989-01-01

Describes study that was conducted to determine the effects of two electronic text variables used in desktop publishing on undergraduate students' reading speed and comprehension. Research on text variables, graphic design, instructional text design, and computer screen design is discussed, and further studies are suggested. (22 references) (LRW)

Practical Downloading to Desktop Publishing: Enhancing the Delivery of Information.

ERIC Educational Resources Information Center

Danziger, Pamela N.

This paper is addressed to librarians and information managers who, as one of the many activities they routinely perform, frequently publish information in such formats as newsletters, manuals, brochures, forms, presentations, or reports. It is argued that desktop publishing--a personal computer-based software package used to generate documents of…

Telecollaborative Desktop-Videoconferencing Exchange: The Case of Mark

ERIC Educational Resources Information Center

Martin, Véronique

2014-01-01

This presentation is a case study of the Intercultural Communicative Competence (ICC) development of Mark, one of ten American students engaged in a desktop-videoconferencing telecollaborative exchange with a class of French students. Due in part to its inherent complexity, this context has not been widely researched. To observe ICC development, I…

Fostering Second Language Oral Communication through Constructivist Interaction in Desktop Videoconferencing

ERIC Educational Resources Information Center

Lee, Lina

2007-01-01

This article describes a classroom project using one-to-one desktop videoconferencing to enhance the development of second language (1.2) oral skills. Eighteen university students worked collaboratively with expert speakers to complete task-based activities. The author gathered data from video-recording samples, reflections, and oral interviews to…

78 FR 41868 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... services and manage networked resources for client devices such as desktop and laptop computers. These... include desktop or laptop computers, which are not primarily accessed via network connections. DOE seeks... Determination of Computer Servers as a Covered Consumer Product AGENCY: Office of Energy Efficiency and...

Aquatic Habitats: Exploring Desktop Ponds. Teacher's Guide.

ERIC Educational Resources Information Center

Barrett, Katharine; Willard, Carolyn

This book, for grades 2-6, is designed to provide students with a highly motivating and unique opportunity to investigate an aquatic habitat. Students set up, observe, study, and reflect upon their own "desktop ponds." Accessible plants and small animals used in these activities include Elodea, Tubifex worms, snails, mosquito larvae, and fish.…

A comparison of the postures assumed when using laptop computers and desktop computers.

PubMed

Straker, L; Jones, K J; Miller, J

1997-08-01

This study evaluated the postural implications of using a laptop computer. Laptop computer screens and keyboards are joined, and are therefore unable to be adjusted separately in terms of screen height and distance, and keyboard height and distance. The posture required for their use is likely to be constrained, as little adjustment can be made for the anthropometric differences of users. In addition to the postural constraints, the study looked at discomfort levels and performance when using laptops as compared with desktops. Statistical analysis showed significantly greater neck flexion and head tilt with laptop use. The other body angles measured (trunk, shoulder, elbow, wrist, and scapula and neck protraction/retraction) showed no statistical differences. The average discomfort experienced after using the laptop for 20 min, although appearing greater than the discomfort experienced after using the desktop, was not significantly greater. When using the laptop, subjects tended to perform better than when using the desktop, though not significantly so. Possible reasons for the results are discussed and implications of the findings outlined.

Reducing nurses'. Workload using a computerized nursing support system linked to the hospital information system.

PubMed

Ito, C; Satoh, I; Michiya, H; Kitayama, Y; Miyazaki, K; Ota, S; Satoh, H; Sakurai, T; Shirato, H; Miyasaka, K

1997-01-01

A computerised nursing support system (CNSS) linked to the hospital information system (HIS) was developed and has been in use for one year, in order to reduce the workload of nurses. CNSS consists of (1) a hand held computer for each nurse (2) desk-top computers in the nurses' station and doctors' rooms (3) a data server (4) an interface with the main hospital information system. Nurses enter vital signs, food intake and other information about the patients into the hand held computer at the bed-side. The information is then sent automatically to the CNSS data server, which also receives patients' details (prescribed medicines etc.) from the HIS. Nurses and doctors can see all the information on the desk-top and hand held computers. This system was introduced in May 1995 into a university hospital ward with 40 beds. A questionnaire was completed by 23 nurses before and after the introduction of CNSS. The mean time required to post vital data was significantly reduced from 121 seconds to 54 seconds (p < 0.01). After three months 30% of nurses felt CNSS had reduced their workload, while 30% felt it had complicated their work; after five months 70% noted a reduction and 0% reported that CNSS had made their work more complex. The study therefore concludes that the interface between a computerised nursing support system and the hospital information system reduced the workload of nurses.

The GBT Dynamic Scheduling System: Powered by the Web

NASA Astrophysics Data System (ADS)

Marganian, P.; Clark, M.; McCarty, M.; Sessoms, E.; Shelton, A.

2009-09-01

The web technologies utilized for the Robert C. Byrd Green Bank Telescope's (GBT) new Dynamic Scheduling System are discussed, focusing on languages, frameworks, and tools. We use a popular Python web framework, TurboGears, to take advantage of the extensive web services the system provides. TurboGears is a model-view-controller framework, which aggregates SQLAlchemy, Genshi, and CherryPy respectively. On top of this framework, Javascript (Prototype, script.aculo.us, and JQuery) and cascading style sheets (Blueprint) are used for desktop-quality web pages.

Twelve years' experience of computer-aided diagnosis in a district general hospital.

PubMed Central

McAdam, W. A.; Brock, B. M.; Armitage, T.; Davenport, P.; Chan, M.; de Dombal, F. T.

1990-01-01

This paper describes experience in a modern district general hospital with a small desktop system for computer-aided diagnosis of acute abdominal pain, over a 12-year period involving 5512 cases. When compared with a baseline year (1973) in which unaided performance was monitored, during an initial study period (1974-76) the diagnostic accuracy of junior staff rose by between 10 and 15%. This higher performance level was then maintained for a decade (1976-86) despite changes in staff. The perforation rate among appendicitis cases fell from 27% to 12.5%, accompanied by a smaller fall in negative laparotomy rates. The saving in surgical bednights devoted to acute abdominal pain was approximately 15%, and the notional cost of resources saved during the first 6 years of operation was 120,000 pounds. Other hospitals have shown--in the short term--benefits similar to those obtained at Airedale District General Hospital. The long-term benefits of the system at Airedale reinforce the conclusions of the earlier short-term trials that a comparable system should probably be offered to all DGHs in the UK, not as an exercise in 'artificial intelligence' but as an effective continuing stimulus to good clinical practice. PMID:2185682

Tigres Workflow Library: Supporting Scientific Pipelines on HPC Systems

DOE PAGES

Hendrix, Valerie; Fox, James; Ghoshal, Devarshi; ...

2016-07-21

The growth in scientific data volumes has resulted in the need for new tools that enable users to operate on and analyze data on large-scale resources. In the last decade, a number of scientific workflow tools have emerged. These tools often target distributed environments, and often need expert help to compose and execute the workflows. Data-intensive workflows are often ad-hoc, they involve an iterative development process that includes users composing and testing their workflows on desktops, and scaling up to larger systems. In this paper, we present the design and implementation of Tigres, a workflow library that supports the iterativemore » workflow development cycle of data-intensive workflows. Tigres provides an application programming interface to a set of programming templates i.e., sequence, parallel, split, merge, that can be used to compose and execute computational and data pipelines. We discuss the results of our evaluation of scientific and synthetic workflows showing Tigres performs with minimal template overheads (mean of 13 seconds over all experiments). We also discuss various factors (e.g., I/O performance, execution mechanisms) that affect the performance of scientific workflows on HPC systems.« less

The January 2015 Repressurization of ISS ATCS Loop B - Analysis Limitations and Concerns

NASA Technical Reports Server (NTRS)

Ungar, Eugene; Rankin, J. Gary; Schaff, Mary; Figueroa, Marcelino

2015-01-01

In January 2013 a false ammonia leak alarm resulted in the shutdown and partial depressurization of one of the two International Space Station (ISS) External Active Thermal Control System (EATCS) loops. The depressurization resulted in a vapor bubble of 18 liters in warm parts of the stagnant loop. To repressurize the loop and regain system operation, liquid would have to be moved from the Ammonia Tank Assembly (ATA) into the loop. This resulted in the possibility of moving cold (as low as -30 C) ammonia into the water-filled Internal Active Thermal Control System (IATCS) interface heat exchangers. Before moving forward, the freezing potential of the repressurization was evaluated through analysis - using both a Thermal Desktop SINDA/FLUINT model and hand calculations. The models yielded very different results, but both models indicated that heat exchanger freezing was not an issue. Therefore, the repressurization proceeded. The presentation describes the physical situation of the EATCS prior to repressurization and discusses the potential limits and pitfalls of the repressurization. The pre-repressurization analytical models and their results are discussed. The successful repressurization is describled and the results of a post-event model assessment is detailed.

The design of financial recording system in industrial bio-briquette of Ramie (Boehmeria nivea) decortication waste with design thinking approach

NASA Astrophysics Data System (ADS)

Irianto, R.; Purnomo, D.; Prima, S.; Wulandari, A.

2017-05-01

The production process of ramie (boehmeria nivea) fibers generates waste which contents 5.95 to 7.83% ash; 1.88 to 2.87% silicate; 30.67 to 31.08% lignin; 33.81 to 35.99% alpha cellulose; 62.95 to 63.78% holoselulosa; 17.43 to 18.14% pentosan, which can be used as raw material of bio-briquette. Those potential can be used to generate a business opportunity, such as industrial bio-briquette of ramie decortication waste. The purpose of this research is to create accounting information which could present an income statement that is easily applied on industrial bio-briquette of ramie decortication waste. This research use descriptive analysis method with design with design thinking approach to gather the information through depth observation on human being as the object to achieve the purpose. The result in this research is financial recording system of industrial bio-briquette of ramie decortication waste in a desktop application. The system is integrated with production activities according to the needs of accounting information particularly at managerial production. The existing applications creates information in the form of financial operations which can be used as a factor in decision-making.

Tigres Workflow Library: Supporting Scientific Pipelines on HPC Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendrix, Valerie; Fox, James; Ghoshal, Devarshi

The growth in scientific data volumes has resulted in the need for new tools that enable users to operate on and analyze data on large-scale resources. In the last decade, a number of scientific workflow tools have emerged. These tools often target distributed environments, and often need expert help to compose and execute the workflows. Data-intensive workflows are often ad-hoc, they involve an iterative development process that includes users composing and testing their workflows on desktops, and scaling up to larger systems. In this paper, we present the design and implementation of Tigres, a workflow library that supports the iterativemore » workflow development cycle of data-intensive workflows. Tigres provides an application programming interface to a set of programming templates i.e., sequence, parallel, split, merge, that can be used to compose and execute computational and data pipelines. We discuss the results of our evaluation of scientific and synthetic workflows showing Tigres performs with minimal template overheads (mean of 13 seconds over all experiments). We also discuss various factors (e.g., I/O performance, execution mechanisms) that affect the performance of scientific workflows on HPC systems.« less

Real-Time Detection and Reading of LED/LCD Displays for Visually Impaired Persons

PubMed Central

Tekin, Ender; Coughlan, James M.; Shen, Huiying

2011-01-01

Modern household appliances, such as microwave ovens and DVD players, increasingly require users to read an LED or LCD display to operate them, posing a severe obstacle for persons with blindness or visual impairment. While OCR-enabled devices are emerging to address the related problem of reading text in printed documents, they are not designed to tackle the challenge of finding and reading characters in appliance displays. Any system for reading these characters must address the challenge of first locating the characters among substantial amounts of background clutter; moreover, poor contrast and the abundance of specular highlights on the display surface – which degrade the image in an unpredictable way as the camera is moved – motivate the need for a system that processes images at a few frames per second, rather than forcing the user to take several photos, each of which can take seconds to acquire and process, until one is readable. We describe a novel system that acquires video, detects and reads LED/LCD characters in real time, reading them aloud to the user with synthesized speech. The system has been implemented on both a desktop and a cell phone. Experimental results are reported on videos of display images, demonstrating the feasibility of the system. PMID:21804957

Integrating labview into a distributed computing environment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasemir, K. U.; Pieck, M.; Dalesio, L. R.

2001-01-01

Being easy to learn and well suited for a selfcontained desktop laboratory setup, many casual programmers prefer to use the National Instruments Lab-VIEW environment to develop their logic. An ActiveX interface is presented that allows integration into a plant-wide distributed environment based on the Experimental Physics and Industrial Control System (EPICS). This paper discusses the design decisions and provides performance information, especially considering requirements for the Spallation Neutron Source (SNS) diagnostics system.

Developing an Online Learning Media Using Smartphone for the Electrical Machinery Course

ERIC Educational Resources Information Center

Muchlas

2018-01-01

This research is aimed to prepare a desktop-based learning media that can be used to support an online lab activities using android smartphones in Electrical Machinery Course at the Department of Electrical Engineering for the undergraduate level. This work uses a conceptual development model which integrates some sub systems of internet…

Embracing the Archives: How NPR Librarians Turned Their Collection into a Workflow Tool

ERIC Educational Resources Information Center

Sin, Lauren; Daugert, Katie

2013-01-01

Several years ago, National Public Radio (NPR) librarians began developing a new content management system (CMS). It was intended to offer desktop access for all NPR-produced content, including transcripts, audio, and metadata. Fast-forward to 2011, and their shiny, new database, Artemis, was ready for debut. Their next challenge: to teach a staff…

Pest management in Douglas-fir seed orchards: a microcomputer decision method

Treesearch

James B. Hoy; Michael I. Haverty

1988-01-01

The computer program described provides a Douglas-fir seed orchard manager (user) with a quantitative method for making insect pest management decisions on a desk-top computer. The decision system uses site-specific information such as estimates of seed crop size, insect attack rates, insecticide efficacy and application costs, weather, and crop value. At sites where...

Computerized preparation of a scientific poster.

PubMed

Lugo, M; Speaker, M G; Cohen, E J

1989-01-01

We prepared an attractive and effective poster using a Macintosh computer and Laserwriter and Imagewriter II printers. The advantages of preparing the poster in this fashion were increased control of the final product, decreased cost, and a sense of artistic satisfaction. Although we employed only the above mentioned computer, the desktop publishing techniques described can be used with other systems.

75 FR 80296 - Extension of Filing Accommodation for Static Pool Information in Filings With Respect to Asset...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Systems in 1993 for document exchange. PDF captures formatting information from a variety of desktop publishing applications, making it possible to send formatted documents and have them appear on the recipient... Administrative Procedure Act generally requires that an agency publish an adopted rule in the Federal Register 30...

Numerical Optimization Using Desktop Computers

DTIC Science & Technology

1980-09-11

concentrating compound parabolic trough solar collector . Thermophysical, geophysical, optical and economic analyses were used to compute a life-cycle...third computer program, NISCO, was developed to model a nonimaging concentrating compound parabolic trough solar collector using thermophysical...concentrating compound parabolic trough Solar Collector . C. OBJECTIVE The objective of this thesis was to develop a system of interactive programs for the Hewlett

Getting a Jump on the Future: Everything You'll Ever Need to Know about Multimedia Authoring Tools.

ERIC Educational Resources Information Center

D'Ignazio, Fred

1992-01-01

Discusses issues involved with buying and using multimedia authoring programs. Six programs are compared: (1) MediaText, (2) HyperCard, (3) LinkWay Live!, (4) AmigaVision, (5) Director, and (6) Multimedia Desktop. Highlights include the use of multimedia in education, sequential versus hierarchical organization, price, system requirements, digital…

Making over the Desktop and Printing System at Dalhousie

ERIC Educational Resources Information Center

Nikkel, Terry; Kutty, Ashwin

2004-01-01

Dalhousie is a medium-sized university, with about 15,000 FTE students, located in Halifax, Nova Scotia. It is one of Canada's oldest and most prestigious universities, yet, like many other public institutions, it frequently suffers from a lack of adequate funding to fulfill all the conflicting needs of the various faculties and departments. This…

Effects of Desktop Virtual Reality Environment Training on State Anxiety and Vocational Identity Scores among Persons with Disabilities during Job Placement

ERIC Educational Resources Information Center

Washington, Andre Lamont

2013-01-01

This study examined how desktop virtual reality environment training (DVRET) affected state anxiety and vocational identity of vocational rehabilitation services consumers during job placement/job readiness activities. It utilized a quantitative research model with a quasi-experimental pretest-posttest design plus some qualitative descriptive…

Desktop Cloud Visualization: the new technology to remote access 3D interactive applications in the Cloud.

PubMed

Torterolo, Livia; Ruffino, Francesco

2012-01-01

In the proposed demonstration we will present DCV (Desktop Cloud Visualization): a unique technology that allows users to remote access 2D and 3D interactive applications over a standard network. This allows geographically dispersed doctors work collaboratively and to acquire anatomical or pathological images and visualize them for further investigations.

The Use of the Webcam for Teaching a Foreign Language in a Desktop Videoconferencing Environment

ERIC Educational Resources Information Center

Develotte, Christine; Guichon, Nicolas; Vincent, Caroline

2010-01-01

This paper explores how language teachers learn to teach with a synchronous multimodal setup ("Skype"), and it focuses on their use of the webcam during the pedagogical interaction. First, we analyze the ways that French graduate students learning to teach online use the multimodal resources available in a desktop videoconferencing (DVC)…

Expanding Geometry Understanding with 3D Printing

ERIC Educational Resources Information Center

Cochran, Jill A.; Cochran, Zane; Laney, Kendra; Dean, Mandi

2016-01-01

With the rise of personal desktop 3D printing, a wide spectrum of educational opportunities has become available for educators to leverage this technology in their classrooms. Until recently, the ability to create physical 3D models was well beyond the scope, skill, and budget of many schools. However, since desktop 3D printers have become readily…

Film Pedagogy in the History Classroom: Desktop Documentary-Making Skills for History Teachers and Students

ERIC Educational Resources Information Center

Schul, James E.

2014-01-01

The emergence of digital technology provides new opportunities for teaching and learning in the history classroom. However, these new opportunities often require new skills to be learned by teachers and students alike. This article focuses on one such digitally oriented strategy, desktop documentary making, which empowers students to easily make…

Virtual Reality on a Desktop Hailed as New Tool in Distance Education.

ERIC Educational Resources Information Center

Young, Jeffrey R.

2000-01-01

Describes college and university educational applications of desktop virtual reality to provide a more human touch to interactive distance education programs and impress the brain with more vivid images. Critics suggest the technology is too costly and time consuming and may even distract students from the content of an online course. (DB)

Creative Computer Detective: The Basics of Teaching Desktop Publishing.

ERIC Educational Resources Information Center

Slothower, Jodie

Teaching desktop publishing (dtp) in college journalism classes is most effective when the instructor integrates into specific courses four types of software--a word processor, a draw program, a paint program and a layout program. In a course on design and layout, the instructor can demonstrate with the computer how good design can be created and…

Desktop Virtual Reality: A Powerful New Technology for Teaching and Research in Industrial Teacher Education

ERIC Educational Resources Information Center

Ausburn, Lynna J.; Ausburn, Floyd B.

2004-01-01

Virtual Reality has been defined in many different ways and now means different things in various contexts. VR can range from simple environments presented on a desktop computer to fully immersive multisensory environments experienced through complex headgear and bodysuits. In all of its manifestations, VR is basically a way of simulating or…

78 FR 50039 - Procurement List, Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... Committee for Purchase From People Who Are Blind or Severely Disabled published notices of proposed... Commissary Agency. NSN: 7510-00-NIB-9832--Portable Desktop Clipboard, 10'' W x 2-\\3/ 5\\'' D x 16'' H, Black. NSN: 7510-00-NIB-9833--Portable Desktop Clipboard, 10'' W x 2-\\3/ 5\\'' D x 16'' H, Blue. NSN: 7510-00...

Automated Vision Test Development and Validation

DTIC Science & Technology

2016-11-01

Deputy Chief, Aerosp Med Consultation Div Chair, Aerospace Medicine Department This report is published in the interest of...produce software for desktop displays; and to evaluate features such as user interfaces, threshold algorithms, validity of results, and screening...cost of performing full threshold testing on over 30% of normal subjects, which is quite time consuming. This effort was accomplished using desktop

26 CFR 1.179-5 - Time and manner of making election.

Code of Federal Regulations, 2010 CFR

2010-04-01

... desktop computer costing $1,500. On Taxpayer's 2003 Federal tax return filed on April 15, 2004, Taxpayer elected to expense under section 179 the full cost of the laptop computer and the full cost of the desktop... provided by the Internal Revenue Code, the regulations under the Code, or other guidance published in the...

Campus Computing 1990: The EDUCOM/USC Survey of Desktop Computing in Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.; Eastman, Skip

The National Survey of Desktop Computer Use in Higher Education was conducted in the spring and summer of 1990 by the Center for Scholarly Technology at the University of Southern California, in cooperation with EDUCOM and with support from 15 corporate sponsors. The survey was designed to collect information about campus planning, policies, and…

New Directions in the Delivery of Business News.

ERIC Educational Resources Information Center

White, Martin

After a period of slow growth, companies that provide business news to the manager's desktop PC are now among the most rapidly growing companies in the United States information industry. Well established companies such as Desktop Data and Individual, Inc. are now being joined by a number of new services and by enhanced versions of existing…

Practising Mental Rotation Using Interactive Desktop Mental Rotation Trainer (iDeMRT)

ERIC Educational Resources Information Center

Rafi, Ahmad; Samsudin, Khairulanuar

2009-01-01

An experimental study involving 30 undergraduates (mean age = 20.5 years) in mental rotation (MR) training was conducted in an interactive Desktop Mental Rotation Trainer (iDeMRT). Stratified random sampling assigned students into one experimental group and one control group. The former trained in iDeMRT and the latter trained in conventional…

Using M@th Desktop Notebooks and Palettes in the Classroom

ERIC Educational Resources Information Center

Simonovits, Reinhard

2011-01-01

This article explains the didactical design of M@th Desktop (MD), a teaching and learning software application for high schools and universities. The use of two types of MD resources is illustrated: notebooks and palettes, focusing on the topic of exponential functions. The handling of MD in a blended learning approach and the impact on the…

Application of desktop computers in nuclear engineering education

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graves, H.W. Jr.

1990-01-01

Utilization of desktop computers in the academic environment is based on the same objectives as in the industrial environment - increased quality and efficiency. Desktop computers can be extremely useful teaching tools in two general areas: classroom demonstrations and homework assignments. Although differences in emphasis exist, tutorial programs share many characteristics with interactive software developed for the industrial environment. In the Reactor Design and Fuel Management course at the University of Maryland, several interactive tutorial programs provided by Energy analysis Software Service have been utilized. These programs have been designed to be sufficiently structured to permit an orderly, disciplined solutionmore » to the problem being solved, and yet be flexible enough to accommodate most problem solution options.« less

Modeling of Heat Transfer and Ablation of Refractory Material Due to Rocket Plume Impingement

NASA Technical Reports Server (NTRS)

Harris, Michael F.; Vu, Bruce T.

2012-01-01

CR Tech's Thermal Desktop-SINDA/FLUINT software was used in the thermal analysis of a flame deflector design for Launch Complex 39B at Kennedy Space Center, Florida. The analysis of the flame deflector takes into account heat transfer due to plume impingement from expected vehicles to be launched at KSC. The heat flux from the plume was computed using computational fluid dynamics provided by Ames Research Center in Moffet Field, California. The results from the CFD solutions were mapped onto a 3-D Thermal Desktop model of the flame deflector using the boundary condition mapping capabilities in Thermal Desktop. The ablation subroutine in SINDA/FLUINT was then used to model the ablation of the refractory material.

Node Resource Manager: A Distributed Computing Software Framework Used for Solving Geophysical Problems

NASA Astrophysics Data System (ADS)

Lawry, B. J.; Encarnacao, A.; Hipp, J. R.; Chang, M.; Young, C. J.

2011-12-01

With the rapid growth of multi-core computing hardware, it is now possible for scientific researchers to run complex, computationally intensive software on affordable, in-house commodity hardware. Multi-core CPUs (Central Processing Unit) and GPUs (Graphics Processing Unit) are now commonplace in desktops and servers. Developers today have access to extremely powerful hardware that enables the execution of software that could previously only be run on expensive, massively-parallel systems. It is no longer cost-prohibitive for an institution to build a parallel computing cluster consisting of commodity multi-core servers. In recent years, our research team has developed a distributed, multi-core computing system and used it to construct global 3D earth models using seismic tomography. Traditionally, computational limitations forced certain assumptions and shortcuts in the calculation of tomographic models; however, with the recent rapid growth in computational hardware including faster CPU's, increased RAM, and the development of multi-core computers, we are now able to perform seismic tomography, 3D ray tracing and seismic event location using distributed parallel algorithms running on commodity hardware, thereby eliminating the need for many of these shortcuts. We describe Node Resource Manager (NRM), a system we developed that leverages the capabilities of a parallel computing cluster. NRM is a software-based parallel computing management framework that works in tandem with the Java Parallel Processing Framework (JPPF, http://www.jppf.org/), a third party library that provides a flexible and innovative way to take advantage of modern multi-core hardware. NRM enables multiple applications to use and share a common set of networked computers, regardless of their hardware platform or operating system. Using NRM, algorithms can be parallelized to run on multiple processing cores of a distributed computing cluster of servers and desktops, which results in a dramatic speedup in execution time. NRM is sufficiently generic to support applications in any domain, as long as the application is parallelizable (i.e., can be subdivided into multiple individual processing tasks). At present, NRM has been effective in decreasing the overall runtime of several algorithms: 1) the generation of a global 3D model of the compressional velocity distribution in the Earth using tomographic inversion, 2) the calculation of the model resolution matrix, model covariance matrix, and travel time uncertainty for the aforementioned velocity model, and 3) the correlation of waveforms with archival data on a massive scale for seismic event detection. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

The self-employment option for people with disabilities: a case study of 'AHVA' desk top publishing company.

PubMed

Reiter, S; Friedman, L; Goldman, T

1995-09-01

From the above results of the evaluation survey it can be concluded that the participants of the 'AHVA' desktop publishing company, who are with multiple and physical disabilities and who have initiated and run their own enterprise, perceived their first year of operation as beneficial. They mastered new technical skills, learned new work-related behaviours, expanded their interpersonal competencies and felt personal growth. They all developed high motivation to make their operation successful. The case study of 'AHVA' desktop publishing company, initiated and run by a group of multiply and physically disable persons, is unique and demonstrates the positive trend for the future. It is an example of personal and group commitment to build a competitive enterprise. It is self determination rather than the actual outcome of services provided, that is the driving force behind their efforts. The team members demonstrated that persons with disabilities can indeed take charge of their lives, be masters of their own destinies, and lead a productive and meaningful life. Here, inclusion is not a one-sided process in which service providers and rehabilitation experts try to integrate persons with disabilities into the community and regular employment. Inclusion is to integrate persons with disabilities into the community and regular employment. Inclusion is achieved here by the self initiative of a group of persons with disabilities. They have created an extraordinary enterprise according to their own special needs. Non-disabled people interact with them on an equal level, as partners in a business, sharing mutual interests of quality production.(ABSTRACT TRUNCATED AT 250 WORDS)

The high-speed after-pulse measurement system for PMT

NASA Astrophysics Data System (ADS)

Cheng, Y.; Qian, S.; Ning, Z.; Xia, J.; Wang, Z.

2018-05-01

A system employing a desktop FADC has been developed to investigate the features of 8-inch Hamamatsu PMT R5912. The system stands out for its high-speed and informative results as a consequence of adopting fast waveform sampling technology. Recording the full waveforms allows us to perform pulse shape analysis. High-precision after-pulse time and charge distribution results are presented in this manuscript. Other characteristics of the photomultiplier tube, such as the gain of charge, dark rate and transit time spread, can be also obtained by this system.

Prototype methodology for obtaining cloud seeding guidance from HRRR model data

NASA Astrophysics Data System (ADS)

Dawson, N.; Blestrud, D.; Kunkel, M. L.; Waller, B.; Ceratto, J.

2017-12-01

Weather model data, along with real time observations, are critical to determine whether atmospheric conditions are prime for super-cooled liquid water during cloud seeding operations. Cloud seeding groups can either use operational forecast models, or run their own model on a computer cluster. A custom weather model provides the most flexibility, but is also expensive. For programs with smaller budgets, openly-available operational forecasting models are the de facto method for obtaining forecast data. The new High-Resolution Rapid Refresh (HRRR) model (3 x 3 km grid size), developed by the Earth System Research Laboratory (ESRL), provides hourly model runs with 18 forecast hours per run. While the model cannot be fine-tuned for a specific area or edited to provide cloud-seeding-specific output, model output is openly available on a near-real-time basis. This presentation focuses on a prototype methodology for using HRRR model data to create maps which aid in near-real-time cloud seeding decision making. The R programming language is utilized to run a script on a Windows® desktop/laptop computer either on a schedule (such as every half hour) or manually. The latest HRRR model run is downloaded from NOAA's Operational Model Archive and Distribution System (NOMADS). A GRIB-filter service, provided by NOMADS, is used to obtain surface and mandatory pressure level data for a subset domain which greatly cuts down on the amount of data transfer. Then, a set of criteria, identified by the Idaho Power Atmospheric Science Group, is used to create guidance maps. These criteria include atmospheric stability (lapse rates), dew point depression, air temperature, and wet bulb temperature. The maps highlight potential areas where super-cooled liquid water may exist, reasons as to why cloud seeding should not be attempted, and wind speed at flight level.

Transitioning EEG experiments away from the laboratory using a Raspberry Pi 2.

PubMed

Kuziek, Jonathan W P; Shienh, Axita; Mathewson, Kyle E

2017-02-01

Electroencephalography (EEG) experiments are typically performed in controlled laboratory settings to minimise noise and produce reliable measurements. These controlled conditions also reduce the applicability of the obtained results to more varied environments and may limit their relevance to everyday situations. Advances in computer portability may increase the mobility and applicability of EEG results while decreasing costs. In this experiment we show that stimulus presentation using a Raspberry Pi 2 computer provides a low cost, reliable alternative to a traditional desktop PC in the administration of EEG experimental tasks. Significant and reliable MMN and P3 activity, typical event-related potentials (ERPs) associated with an auditory oddball paradigm, were measured while experiments were administered using the Raspberry Pi 2. While latency differences in ERP triggering were observed between systems, these differences reduced power only marginally, likely due to the reduced processing power of the Raspberry Pi 2. An auditory oddball task administered using the Raspberry Pi 2 produced similar ERPs to those derived from a desktop PC in a laboratory setting. Despite temporal differences and slight increases in trials needed for similar statistical power, the Raspberry Pi 2 can be used to design and present auditory experiments comparable to a PC. Our results show that the Raspberry Pi 2 is a low cost alternative to the desktop PC when administering EEG experiments and, due to its small size and low power consumption, will enable mobile EEG experiments unconstrained by a traditional laboratory setting. Copyright © 2016 Elsevier B.V. All rights reserved.

Transformation of personal computers and mobile phones into genetic diagnostic systems.

PubMed

Walker, Faye M; Ahmad, Kareem M; Eisenstein, Michael; Soh, H Tom

2014-09-16

Molecular diagnostics based on the polymerase chain reaction (PCR) offer rapid and sensitive means for detecting infectious disease, but prohibitive costs have impeded their use in resource-limited settings where such diseases are endemic. In this work, we report an innovative method for transforming a desktop computer and a mobile camera phone--devices that have become readily accessible in developing countries--into a highly sensitive DNA detection system. This transformation was achieved by converting a desktop computer into a de facto thermal cycler with software that controls the temperature of the central processing unit (CPU), allowing for highly efficient PCR. Next, we reconfigured the mobile phone into a fluorescence imager by adding a low-cost filter, which enabled us to quantitatively measure the resulting PCR amplicons. Our system is highly sensitive, achieving quantitative detection of as little as 9.6 attograms of target DNA, and we show that its performance is comparable to advanced laboratory instruments at approximately 1/500th of the cost. Finally, in order to demonstrate clinical utility, we have used our platform for the successful detection of genomic DNA from the parasite that causes Chagas disease, Trypanosoma cruzi, directly in whole, unprocessed human blood at concentrations 4-fold below the clinical titer of the parasite.

Transformation of Personal Computers and Mobile Phones into Genetic Diagnostic Systems

PubMed Central

2014-01-01

Molecular diagnostics based on the polymerase chain reaction (PCR) offer rapid and sensitive means for detecting infectious disease, but prohibitive costs have impeded their use in resource-limited settings where such diseases are endemic. In this work, we report an innovative method for transforming a desktop computer and a mobile camera phone—devices that have become readily accessible in developing countries—into a highly sensitive DNA detection system. This transformation was achieved by converting a desktop computer into a de facto thermal cycler with software that controls the temperature of the central processing unit (CPU), allowing for highly efficient PCR. Next, we reconfigured the mobile phone into a fluorescence imager by adding a low-cost filter, which enabled us to quantitatively measure the resulting PCR amplicons. Our system is highly sensitive, achieving quantitative detection of as little as 9.6 attograms of target DNA, and we show that its performance is comparable to advanced laboratory instruments at approximately 1/500th of the cost. Finally, in order to demonstrate clinical utility, we have used our platform for the successful detection of genomic DNA from the parasite that causes Chagas disease, Trypanosoma cruzi, directly in whole, unprocessed human blood at concentrations 4-fold below the clinical titer of the parasite. PMID:25223929

Testing geoscience data visualization systems for geological mapping and training

NASA Astrophysics Data System (ADS)

Head, J. W.; Huffman, J. N.; Forsberg, A. S.; Hurwitz, D. M.; Basilevsky, A. T.; Ivanov, M. A.; Dickson, J. L.; Senthil Kumar, P.

2008-09-01

Traditional methods of planetary geological mapping have relied on photographic hard copy and light-table tracing and mapping. In the last several decades this has given way to the availability and analysis of multiple digital data sets, and programs and platforms that permit the viewing and manipulation of multiple annotated layers of relevant information. This has revolutionized the ability to incorporate important new data into the planetary mapping process at all scales. Information on these developments and approaches can be obtained at http://astrogeology.usgs. gov/ Technology/. The processes is aided by Geographic Information Systems (GIS) (see http://astrogeology. usgs.gov/Technology/) and excellent analysis packages (such as ArcGIS) that permit co-registration, rapid viewing, and analysis of multiple data sets on desktop displays (see http://astrogeology.usgs.gov/Projects/ webgis/). We are currently investigating new technological developments in computer visualization and analysis in order to assess their importance and utility in planetary geological analysis and mapping. Last year we reported on the range of technologies available and on our application of these to various problems in planetary mapping. In this contribution we focus on the application of these techniques and tools to Venus geological mapping at the 1:5M quadrangle scale. In our current Venus mapping projects we have utilized and tested the various platforms to understand their capabilities and assess their usefulness in defining units, establishing stratigraphic relationships, mapping structures, reaching consensus on interpretations and producing map products. We are specifically assessing how computer visualization display qualities (e.g., level of immersion, stereoscopic vs. monoscopic viewing, field of view, large vs. small display size, etc.) influence performance on scientific analysis and geological mapping. We have been exploring four different environments: 1) conventional desktops (DT), 2) semi-immersive Fishtank VR (FT) (i.e., a conventional desktop with head-tracked stereo and 6DOF input), 3) tiled wall displays (TW), and 4) fully immersive virtual reality (IVR) (e.g., "Cave Automatic Virtual Environment", or Cave system). Formal studies demonstrate that fully immersive Cave environments are superior to desktop systems for many tasks. There is still much to learn and understand, however, about how the varying degrees of immersive displays affect task performance. For example, in using a 1280x1024 desktop monitor to explore an image, the mapper wastes a lot of time in image zooming/panning to balance the analysis-driven need for both detail as well as context. Therefore, we have spent a considerable amount of time exploring higher-resolution media, such as an IBM Bertha display 3840x2400 or a tiled wall with multiple projectors. We have found through over a year of weekly meetings and assessment that they definitely improve the efficiency of analysis and mapping. Here we outline briefly the nature of the major systems and our initial assessment of these in 1:5M Scale NASA-USGS Venus Geological Mapping Program (http://astrogeology.usgs. gov/Projects/PlanetaryMapping/MapStatus/VenusStatus/V enus_Status.html). 1. Immersive Virtual Reality (Cave): ADVISER System Description: Our Cave system is an 8'x8'x8' cube with four projection surfaces (three walls and the floor). Four linux machines (identical in performance to the desktop machine) provide data for the Cave. Users utilize a handheld 3D tracked input device to navigate. Our 3D input device has a joystick and is simple to use. To navigate, the user simply points in the direction he/she wants to fly and pushes the joystick forward or backward to move relative to that direction. The user can push the joystick to the left and right to rotate his/her position in the virtual world. A collision detection algorithm is used to prevent the user from going underneath the surface. We have developed ADVISER (ADvanced VIsualization for Solar system Exploration) [1,2] as a tool for taking planetary geologists virtually "into the field" in the IVR Cave environment in support of several scientific themes and have assessed its application to geological mapping of Venus. ADVISER aims to create a field experience by integrating multiple data sources and presenting them as a unified environment to the scientist. Additionally, we have developed a virtual field kit, tailored to supporting research tasks dictated by scientific and mapping themes. Technically, ADVISER renders high-resolution topographic and image datasets (8192x8192 samples) in stereo at interactive frame-rates (25+ frames-per-second). The system is based on a state-of-the-art terrain rendering system and is highly interactive; for example, vertical exaggeration, lighting geometry, image contrast, and contour lines can be modified by the user in real time. High-resolution image data can be overlaid on the terrain and other data can be rendered in this context. A detailed description and case studies of ADVISER are available.

Accuracy of remote chest X-ray interpretation using Google Glass technology.

PubMed

Spaedy, Emily; Christakopoulos, Georgios E; Tarar, Muhammad Nauman J; Christopoulos, Georgios; Rangan, Bavana V; Roesle, Michele; Ochoa, Cristhiaan D; Yarbrough, William; Banerjee, Subhash; Brilakis, Emmanouil S

2016-09-15

We sought to explore the accuracy of remote chest X-ray reading using hands-free, wearable technology (Google Glass, Google, Mountain View, California). We compared interpretation of twelve chest X-rays with 23 major cardiopulmonary findings by faculty and fellows from cardiology, radiology, and pulmonary-critical care via: (1) viewing the chest X-ray image on the Google Glass screen; (2) viewing a photograph of the chest X-ray taken using Google Glass and interpreted on a mobile device; (3) viewing the original chest X-ray on a desktop computer screen. One point was given for identification of each correct finding and a subjective rating of user experience was recorded. Fifteen physicians (5 faculty and 10 fellows) participated. The average chest X-ray reading score (maximum 23 points) as viewed through the Google Glass, Google Glass photograph on a mobile device, and the original X-ray viewed on a desktop computer was 14.1±2.2, 18.5±1.5 and 21.3±1.7, respectively (p<0.0001 between Google Glass and mobile device, p<0.0001 between Google Glass and desktop computer and p=0.0004 between mobile device and desktop computer). Of 15 physicians, 11 (73.3%) felt confident in detecting findings using the photograph taken by Google Glass as viewed on a mobile device. Remote chest X-ray interpretation using hands-free, wearable technology (Google Glass) is less accurate than interpretation using a desktop computer or a mobile device, suggesting that further technical improvements are needed before widespread application of this novel technology. Published by Elsevier Ireland Ltd.

MyEEW: A Smartphone App for the ShakeAlert System

NASA Astrophysics Data System (ADS)

Strauss, J. A.; Allen, S.; Allen, R. M.; Hellweg, M.

2015-12-01

Earthquake Early Warning (EEW) is a system that can provide a few to tens of seconds warning prior to ground shaking at a user's location. The goal and purpose of such a system is to reduce, or minimize, the damage, costs, and casualties resulting from an earthquake. A demonstration earthquake early warning system (ShakeAlert) is undergoing testing in the United States by the UC Berkeley Seismological Laboratory, Caltech, ETH Zurich, University of Washington, the USGS, and beta users in California and the Pacific Northwest. The UC Berkeley Seismological Laboratory has created a smartphone app called MyEEW, which interfaces with the ShakeAlert system to deliver early warnings to individual users. Many critical facilities (transportation, police, and fire) have control rooms, which could run a centralized interface, but our ShakeAlert Beta Testers have also expressed their need for mobile options. This app augments the basic ShakeAlert Java desktop applet by allowing workers off-site (or merely out of hearing range) to be informed of coming hazards. MyEEW receives information from the ShakeAlert system to provide users with real-time information about shaking that is about to happen at their individual location. It includes a map, timer, and earthquake information similar to the Java desktop User Display. The app will also feature educational material to help users craft their own response and resiliency strategies. The app will be open to UC Berkeley Earthquake Research Affiliates members for testing in the near future.

Influences of Gender and Computer Gaming Experience in Occupational Desktop Virtual Environments: A Cross-Case Analysis Study

ERIC Educational Resources Information Center

Ausburn, Lynna J.; Ausburn, Floyd B.; Kroutter, Paul J.

2013-01-01

This study used a cross-case analysis methodology to compare four line-of-inquiry studies of desktop virtual environments (DVEs) to examine the relationships of gender and computer gaming experience to learning performance and perceptions. Comparison was made of learning patterns in a general non-technical DVE with patterns in technically complex,…

Multimodal Language Learner Interactions via Desktop Videoconferencing within a Framework of Social Presence: Gaze

ERIC Educational Resources Information Center

Satar, H. Muge

2013-01-01

Desktop videoconferencing (DVC) offers many opportunities for language learning through its multimodal features. However, it also brings some challenges such as gaze and mutual gaze, that is, eye-contact. This paper reports some of the findings of a PhD study investigating social presence in DVC interactions of English as a Foreign Language (EFL)…

Product Descriptions: Desktop Publishing for School Use. A Critical Review of Products. A MicroSIFT Report.

ERIC Educational Resources Information Center

Pollard, Jim

This report presents tabular evaluations of 13 products described by their publishers as appropriate for desktop publishing. These products have in common the ability to combine text and graphics on a page; however, they vary greatly in capabilities and cost. Some products have a very narrow use (e.g., certificate makers and puzzle generators),…

Desktop Publishing for School Use. A Critical Review of Products. A MicroSIFT Report.

ERIC Educational Resources Information Center

Pollard, Jim

This report evaluates 13 products described by their publishers as appropriate for desktop publishing. The products have in common the ability to combine text and graphics on a page; however, they vary greatly in capabilities and cost. Some products have a very narrow use (e.g., certificate makers and puzzle generators), and some have a very…

Towards a Taxonomy of Metaphorical Graphical User Interfaces: Demands and Implementations.

ERIC Educational Resources Information Center

Cates, Ward Mitchell

The graphical user interface (GUI) has become something of a standard for instructional programs in recent years. One type of GUI is the metaphorical type. For example, the Macintosh GUI is based on the "desktop" metaphor where objects one manipulates within the GUI are implied to be objects one might find in a real office's desktop.…

Reach a New Threshold of Freedom and Control with Dell's Flexible Computing Solution: On-Demand Desktop Streaming

ERIC Educational Resources Information Center

Technology & Learning, 2008

2008-01-01

When it comes to IT, there has always been an important link between data center control and client flexibility. As computing power increases, so do the potentially crippling threats to security, productivity and financial stability. This article talks about Dell's On-Demand Desktop Streaming solution which is designed to centralize complete…