Calculation of Resistive Loads for Elastic Resistive Exercises.

PubMed

Picha, Kelsey; Uhl, Tim

2018-03-14

What is the correct resistive load to start resistive training with elastic resistance to gain strength? This question is typically answered by the clinician's best estimate and patient's level of discomfort without objective evidence. To determine the average level of resistance to initiate a strengthening routine with elastic resistance following isometric strength testing. Cohort. Clinical. 34 subjects (31 ± 13 y, 73 ± 17 kg, 170 ± 12 cm). The force produced was measured in Newtons (N) with an isometric dynamometer. The force distance was the distance from center of joint to location of force applied was measured in meters to calculate torque that was called "Test Torque" for the purposes of this report. This torque data was converted to "Exercise Load" in pounds based on the location where the resistance was applied, specifically the distance away from the center of rotation of the exercising limb. The average amount of exercise load as percentage of initial Test Torque for each individual for each exercise was recorded to determine what the average level of resistance that could be used for elastic resistance strengthening program. The percentage of initial test torque calculated for the exercise was recorded for each exercise and torque produced was normalized to body weight. The average percentage of maximal isometric force that was used to initiate exercises was 30 ± 7% of test torque. This provides clinicians with an objective target load to start elastic resistance training. Individual variations will occur but utilization of a load cell during elastic resistance provides objective documentation of exercise progression.

Control of the positional relationship between a sample collection instrument and a surface to be analyzed during a sampling procedure with image analysis

DOEpatents

Van Berkel, Gary J.; Kertesz, Vilmos

2011-08-09

A system and method utilizes an image analysis approach for controlling the collection instrument-to-surface distance in a sampling system for use, for example, with mass spectrometric detection. Such an approach involves the capturing of an image of the collection instrument or the shadow thereof cast across the surface and the utilization of line average brightness (LAB) techniques to determine the actual distance between the collection instrument and the surface. The actual distance is subsequently compared to a target distance for re-optimization, as necessary, of the collection instrument-to-surface during an automated surface sampling operation.

Using anatomical landmark to avoid phrenic nerve injury during balloon-based procedures in atrial fibrillation patients.

PubMed

Smith, Nicolina M; Segars, Larry; Kauffman, Travis; Olinger, Anthony B

2017-12-01

Atrial fibrillation (AF) is an arrhythmia which affects as many as 2.7 million Americans. AF should be treated, because it can lead to a four-to-fivefold increased risk of experiencing a stroke. The American College of Cardiology/American Heart Association guidelines for the treatment of drug refractory and symptomatic paroxysmal AF denote catheter ablation as the standard of care. The newest ablation treatment, cryoballoon, uses a cold balloon tip. The biggest risk factor associated with the cryoballoon ablation is phrenic nerve injury (PNI). The purpose of this study is to measure relevant distances from specific landmarks to the right phrenic nerve (RPN) to create a safe zone for physicians. Using 30 cadaveric specimens, we measured laterally from the right superior pulmonary vein orifice (RSPV) to the RPN at the level of the sixth thoracic vertebra and laterally from the lateral border of the sixth thoracic vertebral body (T6) to the RPN. The depth and width of the left atrium (LA) were also measured to establish a cross-sectional area of the LA. The cross-sectional area of the LA was then correlated with the averaged measurements to see if the area of the LA could be a predictor of the location of the RPN. The average distance from the RPN-RSPV was 9.6 mm (range 4.3-18.8 mm). The average RPN-T6 distance was 30.6 mm (range 13.7-49.9 mm). There was a non-significant trend that suggests as the size of the LA increases, the measured distances also increased. Using the lateral border of the sixth thoracic vertebra as a landmark, which can be viewed under fluoroscopy during the procedure, physicians can triangulate the distance to the RSPV and determine the approximate position of the RPN. Furthermore, physicians can perform a preoperative echocardiogram to determine the size of the LA to assist in determining the position of the RPN with the hopes of avoiding injury to the RPN.

Improved distances and ages for stars common to TGAS and RAVE

NASA Astrophysics Data System (ADS)

McMillan, Paul J.; Kordopatis, Georges; Kunder, Andrea; Binney, James; Wojno, Jennifer; Zwitter, Tomaž; Steinmetz, Matthias; Bland-Hawthorn, Joss; Gibson, Brad K.; Gilmore, Gerard; Grebel, Eva K.; Helmi, Amina; Munari, Ulisse; Navarro, Julio F.; Parker, Quentin A.; Seabroke, George; Watson, Fred; Wyse, Rosemary F. G.

2018-04-01

We combine parallaxes from the first Gaia data release with the spectrophotometric distance estimation framework for stars in the fifth RAVE survey data release. The combined distance estimates are more accurate than either determination in isolation - uncertainties are on average two times smaller than for RAVE-only distances (three times smaller for dwarfs), and 1.4 times smaller than TGAS parallax uncertainties (two times smaller for giants). We are also able to compare the estimates from spectrophotometry to those from Gaia, and use this to assess the reliability of both catalogues and improve our distance estimates. We find that the distances to the lowest log g stars are, on average, overestimated and caution that they may not be reliable. We also find that it is likely that the Gaia random uncertainties are smaller than the reported values. As a byproduct we derive ages for the RAVE stars, many with relative uncertainties less than 20 percent. These results for 219 566 RAVE sources have been made publicly available, and we encourage their use for studies that combine the radial velocities provided by RAVE with the proper motions provided by Gaia. A sample that we believe to be reliable can be found by taking only the stars with the flag notification `flag_any=0'.

Improved distances and ages for stars common to TGAS and RAVE

NASA Astrophysics Data System (ADS)

McMillan, Paul J.; Kordopatis, Georges; Kunder, Andrea; Binney, James; Wojno, Jennifer; Zwitter, Tomaž; Steinmetz, Matthias; Bland-Hawthorn, Joss; Gibson, Brad K.; Gilmore, Gerard; Grebel, Eva K.; Helmi, Amina; Munari, Ulisse; Navarro, Julio F.; Parker, Quentin A.; Seabroke, George; Watson, Fred; Wyse, Rosemary F. G.

2018-07-01

We combine parallaxes from the first Gaia data release with the spectrophotometric distance estimation framework for stars in the fifth RAVE survey data release. The combined distance estimates are more accurate than either determination in isolation - uncertainties are on average two times smaller than for RAVE-only distances (three times smaller for dwarfs), and 1.4 times smaller than TGAS parallax uncertainties (two times smaller for giants). We are also able to compare the estimates from spectrophotometry to those from Gaia, and use this to assess the reliability of both catalogues and improve our distance estimates. We find that the distances to the lowest log g stars are, on average, overestimated and caution that they may not be reliable. We also find that it is likely that the Gaia random uncertainties are smaller than the reported values. As a by-product we derive ages for the RAVE stars, many with relative uncertainties less than 20 per cent. These results for 219 566 RAVE sources have been made publicly available, and we encourage their use for studies that combine the radial velocities provided by RAVE with the proper motions provided by Gaia. A sample that we believe to be reliable can be found by taking only the stars with the flag notification `flag_any=0'.

Antigenic Distance Measurements for Seasonal Influenza Vaccine Selection

PubMed Central

Cai, Zhipeng; Zhang, Tong; Wan, Xiu-Feng

2011-01-01

Influenza vaccination is one of the major options to counteract the effects of influenza diseases. Selection of an effective vaccine strain is the key to the success of an effective vaccination program since vaccine protection can only be achieved when the selected influenza vaccine strain matches the antigenic variants causing future outbreaks. Identification of an antigenic variant is the first step to determine whether vaccine strain needs to be updated. Antigenic distance derived from immunological assays, such as hemagglutination inhibition, is commonly used to measure the antigenic closeness between circulating strains and the current influenza vaccine strain. Thus, consensus on an explicit and robust antigenic distance measurement is critical in influenza surveillance. Based on the current seasonal influenza surveillance procedure, we propose and compare three antigenic distance measurements, including Average antigenic distance (A-distance), Mutual antigenic distance (M-distance), and Largest antigenic distance (L-distance). With the assistance of influenza antigenic cartography, our simulation results demonstrated that M-distance is a robust influenza antigenic distance measurement. Experimental results on both simulation and seasonal influenza surveillance data demonstrate that M-distance can be effectively utilized in influenza vaccine strain selection. PMID:22063385

The Effect of Light Level and Small Pupils on Presbyopic Reading Performance.

PubMed

Xu, Renfeng; Gil, Daniel; Dibas, Mohammed; Hare, William; Bradley, Arthur

2016-10-01

To examine the impact of small pupils and light levels on reading performance of distance-corrected presbyopes. To determine whether small pupils would enable presbyopes to read at near even at low light levels. To establish the lower range of text luminances, we quantified the space-averaged luminance of text in nine different artificially lit interior environments, and examined the impact of the text characters on space-averaged luminance of electronic and printed displays. Distance and near reading speeds of 20 presbyopes (ages 40-60 years) were measured while viewing through artificial pupils (diameters 1-4.5 mm), natural pupils, or with a multifocal contact lens. Space-averaged text luminance levels varied from 0.14 to 140 cd/m2 (including the range of measured environmental text luminances). Adding black text to a white computer display or paper reduces luminance by approximately 15% to 31%, and the lowest encountered environmental text luminance was approximately 2 to 3 cd/m2. For both distance and near reading performance, the 2- to 3-mm small pupil yielded the best overall reading acuity for space-averaged text light levels ≥ 2 cd/m2. The 2- to 3-mm artificial pupils and the multifocal contact lenses both enabled maximum or near-maximum reading speeds for 0.5 logMAR characters at distance and near, but with natural pupils, reading speeds were significantly reduced at near. Although photon noise at low luminance reduces the visual benefits of small pupils, the benefits of 2- to 3-mm artificial pupils are sufficient to enable >80% of distance-corrected presbyopes to read proficiently at near, even at the lowest text luminances found in interior environments.

Three Least-Squares Minimization Approaches to Interpret Gravity Data Due to Dipping Faults

NASA Astrophysics Data System (ADS)

Abdelrahman, E. M.; Essa, K. S.

2015-02-01

We have developed three different least-squares minimization approaches to determine, successively, the depth, dip angle, and amplitude coefficient related to the thickness and density contrast of a buried dipping fault from first moving average residual gravity anomalies. By defining the zero-anomaly distance and the anomaly value at the origin of the moving average residual profile, the problem of depth determination is transformed into a constrained nonlinear gravity inversion. After estimating the depth of the fault, the dip angle is estimated by solving a nonlinear inverse problem. Finally, after estimating the depth and dip angle, the amplitude coefficient is determined using a linear equation. This method can be applied to residuals as well as to measured gravity data because it uses the moving average residual gravity anomalies to estimate the model parameters of the faulted structure. The proposed method was tested on noise-corrupted synthetic and real gravity data. In the case of the synthetic data, good results are obtained when errors are given in the zero-anomaly distance and the anomaly value at the origin, and even when the origin is determined approximately. In the case of practical data (Bouguer anomaly over Gazal fault, south Aswan, Egypt), the fault parameters obtained are in good agreement with the actual ones and with those given in the published literature.

Quantifying Nucleic Acid Ensembles with X-ray Scattering Interferometry.

PubMed

Shi, Xuesong; Bonilla, Steve; Herschlag, Daniel; Harbury, Pehr

2015-01-01

The conformational ensemble of a macromolecule is the complete description of the macromolecule's solution structures and can reveal important aspects of macromolecular folding, recognition, and function. However, most experimental approaches determine an average or predominant structure, or follow transitions between states that each can only be described by an average structure. Ensembles have been extremely difficult to experimentally characterize. We present the unique advantages and capabilities of a new biophysical technique, X-ray scattering interferometry (XSI), for probing and quantifying structural ensembles. XSI measures the interference of scattered waves from two heavy metal probes attached site specifically to a macromolecule. A Fourier transform of the interference pattern gives the fractional abundance of different probe separations directly representing the multiple conformation states populated by the macromolecule. These probe-probe distance distributions can then be used to define the structural ensemble of the macromolecule. XSI provides accurate, calibrated distance in a model-independent fashion with angstrom scale sensitivity in distances. XSI data can be compared in a straightforward manner to atomic coordinates determined experimentally or predicted by molecular dynamics simulations. We describe the conceptual framework for XSI and provide a detailed protocol for carrying out an XSI experiment. © 2015 Elsevier Inc. All rights reserved.

Movement analysis of Australian national league soccer players using global positioning system technology.

PubMed

Wehbe, George M; Hartwig, Timothy B; Duncan, Craig S

2014-03-01

Player activity profiles of match play provide valuable information for optimal athlete training prescriptions, competition strategies, and managing load and recovery and are currently lacking in elite Australian-league (A-League) soccer. The aims of the study were, therefore, to (a) determine match activity profiles for elite A-League soccer players and make match-half and positional comparisons and (b) examine the effect of situational factors including evolving match status (drawing, winning, or losing) and goals being scored and conceded on selected match activity profile variables. Global positioning system tracking devices were used to determine activity profiles of 19 elite male adult soccer players during 8 preseason matches (n = 95 files). Total distance, average speed, high-intensity running (HIR) distance, and very high-intensity running distance decreased from the first to the second half by 7.92, 9.47, 10.10, and 10.99%, respectively. Midfielders covered 11.69% more total distance, 28.08% more HIR distance, and had a 10.93% higher average speed than defenders (p ≤ 0.05; d = 1.90, 1.03, and 1.83, respectively). Attackers performed 27.50 and 30.24% less medium accelerations than defenders and midfielders, respectively (p < 0.01; d = 1.54, and 1.73). When the team was winning, average speed was 4.17% lower than when the team was drawing (p ≤ 0.05, d = 0.32). Scoring or conceding goals did not appear to affect HIR. This study adds to limited knowledge of match demands in elite A-League soccer. The match activity profiles provide descriptive benchmarks that could be used to make comparisons with other elite level soccer populations while also providing a framework for game-specific training prescription, competition strategy, and load management. The generalization that defenders experience a relatively lower match load may be questionable given their relatively high acceleration and deceleration demands.

Reduced Solar Wind Speeds at New Horizons Beyond 30 AU

NASA Astrophysics Data System (ADS)

Elliott, H. A.; McComas, D. J.; Zirnstein, E.; Delamere, P. A.; Bagenal, F.; Stern, A.; Weaver, H. A., Jr.; Young, L. A.; Ennico Smith, K.; Olkin, C.

2017-12-01

Prior comparisons between Voyager 2 and IMP 8 observations found the solar wind had clearly decrease by 8% at a distance of 25 AU. Since mid-2016 solar rotation averaged speeds at New Horizons have been elevated relative to speeds observed in 2014 and 2015. However, we find a clear decrease in the New Horizons speeds beyond 30 AU when compared to those of ACE near Earth. At distances between 30-38.5 AU the relative speed reduction is in the 8-11% range. We will further this work by also comparing with available STEREO observations. By including STEREO, we can assess how sensitive the speed comparisons are to longitude separations and determine the appropriate time scale to average over.

Structure of air shower disc near the core

NASA Technical Reports Server (NTRS)

Inoue, N.; Kawamoto, M.; Misaki, Y.; Maeda, T.; Takeuchi, T.; Toyoda, Y.

1985-01-01

The longitudinal structure of the air shower disk is studied by measuring the arrival time distributions of air shower particles for showers with electron size in the range 3.2 x 10 to the 5.5. power to 3.2 x 10 to the 7.5 power in the Akeno air-shower array (930 gcm squared atmospheric depth). The average FWHM as a parameter of thickness of air shower disk increases with core distances at less than 50m. AT the present stage, dependence on electron size, zenith angle and air shower age is not apparent. The average thickness of the air shower disk within a core distance of 50m could be determined by an electromagnetic cascade starting from the lower altitude.

[Travel time and distances to Norwegian out-of-hours casualty clinics].

PubMed

Raknes, Guttorm; Morken, Tone; Hunskår, Steinar

2014-11-01

Geographical factors have an impact on the utilisation of out-of-hours services. In this study we have investigated the travel distance to out-of-hours casualty clinics in Norwegian municipalities in 2011 and the number of municipalities covered by the proposed recommendations for secondary on-call arrangements due to long distances. We estimated the average maximum travel times and distances in Norwegian municipalities using a postcode-based method. Separate analyses were performed for municipalities with a single, permanently located casualty clinic. Altogether 417 out of 430 municipalities were included. We present the median value of the maximum travel times and distances for the included municipalities. The median maximum average travel distance for the municipalities was 19 km. The median maximum average travel time was 22 minutes. In 40 of the municipalities (10 %) the median maximum average travel time exceeded 60 minutes, and in 97 municipalities (23 %) the median maximum average travel time exceeded 40 minutes. The population of these groups comprised 2 % and 5 % of the country's total population respectively. For municipalities with permanent emergency facilities(N = 316), the median average flight time 16 minutes and median average distance 13 km.. In many municipalities, the inhabitants have a long average journey to out-of-hours emergency health services, but seen as a whole, the inhabitants of these municipalities account for a very small proportion of the Norwegian population. The results indicate that the proposed recommendations for secondary on-call duty based on long distances apply to only a small number of inhabitants. The recommendations should therefore be adjusted and reformulated to become more relevant.

Longitudinal analysis of student performance in a dental hygiene distance education program.

PubMed

Olmsted, Jodi L

2002-09-01

The purpose of the study was to determine if learners who receive face-to-face instruction in an educational program performed statistically better on established benchmark assessments (GPA, course averages, and NBDHE) than learners at a distance from the didactic course instructor. A comparative, quasi-experimental, ex-post facto study was conducted. The treatment variable was program type: face-to-face vs. distance. The performance of five consecutive classes was analyzed, from 1997 to 2001. These five classes consisted of 221 learners, 105 of them at the host site and 115 using distance learning. The experimental groups were divided based upon location--host or cooperating college (distance) site learners. Study results identified no significant difference between host and distance learner performance for the entire educational program. The use of interactive television (ITV) for delivery of an educational program using distance education technology provided acceptable results in learner didactic performance. Learners at both the host and cooperating college (distance) sites performed equally well. The results were used to document program outcomes.

The Near-infrared Optimal Distances Method Applied to Galactic Classical Cepheids Tightly Constrains Mid-infrared Period–Luminosity Relations

NASA Astrophysics Data System (ADS)

Wang, Shu; Chen, Xiaodian; de Grijs, Richard; Deng, Licai

2018-01-01

Classical Cepheids are well-known and widely used distance indicators. As distance and extinction are usually degenerate, it is important to develop suitable methods to robustly anchor the distance scale. Here, we introduce a near-infrared optimal distance method to determine both the extinction values of and distances to a large sample of 288 Galactic classical Cepheids. The overall uncertainty in the derived distances is less than 4.9%. We compare our newly determined distances to the Cepheids in our sample with previously published distances to the same Cepheids with Hubble Space Telescope parallax measurements and distances based on the IR surface brightness method, Wesenheit functions, and the main-sequence fitting method. The systematic deviations in the distances determined here with respect to those of previous publications is less than 1%–2%. Hence, we constructed Galactic mid-IR period–luminosity (PL) relations for classical Cepheids in the four Wide-Field Infrared Survey Explorer (WISE) bands (W1, W2, W3, and W4) and the four Spitzer Space Telescope bands ([3.6], [4.5], [5.8], and [8.0]). Based on our sample of hundreds of Cepheids, the WISE PL relations have been determined for the first time; their dispersion is approximately 0.10 mag. Using the currently most complete sample, our Spitzer PL relations represent a significant improvement in accuracy, especially in the [3.6] band which has the smallest dispersion (0.066 mag). In addition, the average mid-IR extinction curve for Cepheids has been obtained: {A}W1/{A}{K{{s}}}≈ 0.560, {A}W2/{A}{K{{s}}}≈ 0.479, {A}W3/{A}{K{{s}}}≈ 0.507, {A}W4/{A}{K{{s}}}≈ 0.406, {A}[3.6]/{A}{K{{s}}}≈ 0.481, {A}[4.5]/{A}{K{{s}}}≈ 0.469, {A}[5.8]/{A}{K{{s}}}≈ 0.427, and {A}[8.0]/{A}{K{{s}}}≈ 0.427 {mag}.

Polyproline and the “spectroscopic ruler” revisited with single-molecule fluorescence

PubMed Central

Schuler, Benjamin; Lipman, Everett A.; Steinbach, Peter J.; Kumke, Michael; Eaton, William A.

2005-01-01

To determine whether Förster resonance energy transfer (FRET) measurements can provide quantitative distance information in single-molecule fluorescence experiments on polypeptides, we measured FRET efficiency distributions for donor and acceptor dyes attached to the ends of freely diffusing polyproline molecules of various lengths. The observed mean FRET efficiencies agree with those determined from ensemble lifetime measurements but differ considerably from the values expected from Förster theory, with polyproline treated as a rigid rod. At donor–acceptor distances much less than the Förster radius R0, the observed efficiencies are lower than predicted, whereas at distances comparable to and greater than R0, they are much higher. Two possible contributions to the former are incomplete orientational averaging during the donor lifetime and, because of the large size of the dyes, breakdown of the point-dipole approximation assumed in Förster theory. End-to-end distance distributions and correlation times obtained from Langevin molecular dynamics simulations suggest that the differences for the longer polyproline peptides can be explained by chain bending, which considerably shortens the donor–acceptor distances. PMID:15699337

Testing Metal-Poor Stellar Models and Isochrones with HST Parallaxes of Metal-Poor Stars

NASA Astrophysics Data System (ADS)

Chaboyer, B.; McArthur, B. E.; O'Malley, E.; Benedict, G. F.; Feiden, G. A.; Harrison, T. E.; McWilliam, A.; Nelan, E. P.; Patterson, R. J.; Sarajedini, A.

2017-02-01

Hubble Space Telescope (HST) fine guidance sensor observations were used to obtain parallaxes of eight metal-poor ([Fe/H] < -1.4) stars. The parallaxes of these stars determined by the new Hipparcos reduction average 17% accuracy, in contrast to our new HST parallaxes, which average 1% accuracy and have errors on the individual parallaxes ranging from 85 to 144 μas. These parallax data were combined with HST Advanced Camera for Surveys photometry in the F606W and F814W filters to obtain the absolute magnitudes of the stars with an accuracy of 0.02-0.03 mag. Six of these stars are on the main sequence (MS) (with -2.7 < [Fe/H] < -1.8) and are suitable for testing metal-poor stellar evolution models and determining the distances to metal-poor globular clusters (GCs). Using the abundances obtained by O’Malley et al., we find that standard stellar models using the VandenBerg & Clem color transformation do a reasonable job of matching five of the MS stars, with HD 54639 ([Fe/H] = -2.5) being anomalous in its location in the color-magnitude diagram. Stellar models and isochrones were generated using a Monte Carlo analysis to take into account uncertainties in the models. Isochrones that fit the parallax stars were used to determine the distances and ages of nine GCs (with -2.4 ≤ [Fe/H] ≤ -1.9). Averaging together the age of all nine clusters led to an absolute age of the oldest, most metal-poor GCs of 12.7 ± 1.0 Gyr, where the quoted uncertainty takes into account the known uncertainties in the stellar models and isochrones, along with the uncertainty in the distance and reddening of the clusters.

Average geodesic distance of skeleton networks of Sierpinski tetrahedron

NASA Astrophysics Data System (ADS)

Yang, Jinjin; Wang, Songjing; Xi, Lifeng; Ye, Yongchao

2018-04-01

The average distance is concerned in the research of complex networks and is related to Wiener sum which is a topological invariant in chemical graph theory. In this paper, we study the skeleton networks of the Sierpinski tetrahedron, an important self-similar fractal, and obtain their asymptotic formula for average distances. To provide the formula, we develop some technique named finite patterns of integral of geodesic distance on self-similar measure for the Sierpinski tetrahedron.

Flare angles measured with ball gage

NASA Technical Reports Server (NTRS)

Cleghorn, D.; Wall, W. A.

1968-01-01

Precision tungsten carbide balls measure the internal angle of flared joints. Measurements from small and large balls in the flare throat to an external reference point are made. The difference in distances and diameters determine the average slope of the flare between the points of ball contact.

Time structure of the EAS electron and muon components measured by the KASCADE Grande experiment

NASA Astrophysics Data System (ADS)

Apel, W. D.; Arteaga, J. C.; Badea, A. F.; Bekk, K.; Bertaina, M.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Brüggemann, M.; Buchholz, P.; Cantoni, E.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; Di Pierro, F.; Doll, P.; Engel, R.; Engler, J.; Finger, M.; Fuhrmann, D.; Ghia, P. L.; Gils, H. J.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kickelbick, D.; Klages, H. O.; Kolotaev, Y.; Luczak, P.; Mathes, H. J.; Mayer, H. J.; Meurer, C.; Milke, J.; Mitrica, B.; Morello, C.; Navarra, G.; Nehls, S.; Oehlschläger, J.; Ostapchenko, S.; Over, S.; Petcu, M.; Pierog, T.; Plewnia, S.; Rebel, H.; Roth, M.; Schieler, H.; Sima, O.; Stümpert, M.; Toma, G.; Trinchero, G. C.; Ulrich, H.; van Buren, J.; Walkowiak, W.; Weindl, A.; Wochele, J.; Zabierowski, J.

2008-06-01

Extensive air showers measured by the KASCADE-Grande experiment at the Forschungszentrum Karlsruhe are studied with respect to the arrival times of electrons and muons at observation level. The mean and the spread of the arrival time distributions have been used to determine the average time profile of the electromagnetic and muonic shower disk. For core distances R>200m particles of the muonic shower component arrive on average earlier at observation level than particles of the electromagnetic shower component. The difference increases with the core distance from Δ=(12.9±0.2)ns at R>200m to Δ=(47±1)ns at R=500m, where the width of the muonic and electromagnetic shower disks are comparable. This difference in arrival time is used to separate the electrons and muons dependent on the distance from the shower center. This is intended to be used by experiments with time resolving detectors.

The mean coronal magnetic field determined from Helios Faraday rotation measurements

NASA Technical Reports Server (NTRS)

Patzold, M.; Bird, M. K.; Volland, H.; Levy, G. S.; Seidel, B. L.; Stelzried, C. T.

1987-01-01

Coronal Faraday rotation of the linearly polarized carrier signals of the Helios spacecraft was recorded during the regularly occurring solar occultations over almost a complete solar cycle from 1975 to 1984. These measurements are used to determine the average strength and radial variation of the coronal magnetic field at solar minimum at solar distances from 3-10 solar radii, i.e., the range over which the complex fields at the coronal base are transformed into the interplanetary spiral. The mean coronal magnetic field in 1975-1976 was found to decrease with radial distance according to r exp-alpha, where alpha = 2.7 + or - 0.2. The mean field magnitude was 1.0 + or - 0.5 x 10 to the -5th tesla at a nominal solar distance of 5 solar radii. Possibly higher magnetic field strengths were indicated at solar maximum, but a lack of data prevented a statistical determination of the mean coronal field during this epoch.

An iterative method for the localization of a neutron source in a large box (container)

NASA Astrophysics Data System (ADS)

Dubinski, S.; Presler, O.; Alfassi, Z. B.

2007-12-01

The localization of an unknown neutron source in a bulky box was studied. This can be used for the inspection of cargo, to prevent the smuggling of neutron and α emitters. It is important to localize the source from the outside for safety reasons. Source localization is necessary in order to determine its activity. A previous study showed that, by using six detectors, three on each parallel face of the box (460×420×200 mm 3), the location of the source can be found with an average distance of 4.73 cm between the real source position and the calculated one and a maximal distance of about 9 cm. Accuracy was improved in this work by applying an iteration method based on four fixed detectors and the successive iteration of positioning of an external calibrating source. The initial positioning of the calibrating source is the plane of detectors 1 and 2. This method finds the unknown source location with an average distance of 0.78 cm between the real source position and the calculated one and a maximum distance of 3.66 cm for the same box. For larger boxes, localization without iterations requires an increase in the number of detectors, while localization with iterations requires only an increase in the number of iteration steps. In addition to source localization, two methods for determining the activity of the unknown source were also studied.

Determination of safety distance limits for a human near a cellular base station antenna, adopting the IEEE standard or ICNIRP guidelines.

PubMed

Cooper, Justin; Marx, Bernd; Buhl, Johannes; Hombach, Volker

2002-09-01

This paper investigates the minimum distance for a human body in the near field of a cellular telephone base station antenna for which there is compliance with the IEEE or ICNIRP threshold values for radio frequency electromagnetic energy absorption in the human body. First, local maximum specific absorption rates (SARs), measured and averaged over volumes equivalent to 1 and to 10 g tissue within the trunk region of a physical, liquid filled shell phantom facing and irradiated by a typical GSM 900 base station antenna, were compared to corresponding calculated SAR values. The calculation used a homogeneous Visible Human body model in front of a simulated base station antenna of the same type. Both real and simulated base station antennas operated at 935 MHz. Antenna-body distances were between 1 and 65 cm. The agreement between measurements and calculations was excellent. This gave confidence in the subsequent calculated SAR values for the heterogeneous Visible Human model, for which each tissue was assigned the currently accepted values for permittivity and conductivity at 935 MHz. Calculated SAR values within the trunk of the body were found to be about double those for the homogeneous case. When the IEEE standard and the ICNIRP guidelines are both to be complied with, the local SAR averaged over 1 g tissue was found to be the determining parameter. Emitted power values from the antenna that produced the maximum SAR value over 1 g specified in the IEEE standard at the base station are less than those needed to reach the ICNIRP threshold specified for the local SAR averaged over 10 g. For the GSM base station antenna investigated here operating at 935 MHz with 40 W emitted power, the model indicates that the human body should not be closer to the antenna than 18 cm for controlled environment exposure, or about 95 cm for uncontrolled environment exposure. These safe distance limits are for SARs averaged over 1 g tissue. The corresponding safety distance limits under the ICNIRP guidelines for SAR taken over 10 g tissue are 5 cm for occupational exposure and about 75 cm for general-public exposure. Copyright 2002 Wiley-Liss, Inc.

Walking Behavior of Zoo Elephants: Associations between GPS-Measured Daily Walking Distances and Environmental Factors, Social Factors, and Welfare Indicators

PubMed Central

Holdgate, Matthew R.; Meehan, Cheryl L.; Hogan, Jennifer N.; Miller, Lance J.; Soltis, Joseph; Andrews, Jeff; Shepherdson, David J.

2016-01-01

Research with humans and other animals suggests that walking benefits physical health. Perhaps because these links have been demonstrated in other species, it has been suggested that walking is important to elephant welfare, and that zoo elephant exhibits should be designed to allow for more walking. Our study is the first to address this suggestion empirically by measuring the mean daily walking distance of elephants in North American zoos, determining the factors that are associated with variations in walking distance, and testing for associations between walking and welfare indicators. We used anklets equipped with GPS data loggers to measure outdoor daily walking distance in 56 adult female African (n = 33) and Asian (n = 23) elephants housed in 30 North American zoos. We collected 259 days of data and determined associations between distance walked and social, housing, management, and demographic factors. Elephants walked an average of 5.3 km/day with no significant difference between species. In our multivariable model, more diverse feeding regimens were correlated with increased walking, and elephants who were fed on a temporally unpredictable feeding schedule walked 1.29 km/day more than elephants fed on a predictable schedule. Distance walked was also positively correlated with an increase in the number of social groupings and negatively correlated with age. We found a small but significant negative correlation between distance walked and nighttime Space Experience, but no other associations between walking distances and exhibit size were found. Finally, distance walked was not related to health or behavioral outcomes including foot health, joint health, body condition, and the performance of stereotypic behavior, suggesting that more research is necessary to determine explicitly how differences in walking may impact elephant welfare. PMID:27414411

Walking Behavior of Zoo Elephants: Associations between GPS-Measured Daily Walking Distances and Environmental Factors, Social Factors, and Welfare Indicators.

PubMed

Holdgate, Matthew R; Meehan, Cheryl L; Hogan, Jennifer N; Miller, Lance J; Soltis, Joseph; Andrews, Jeff; Shepherdson, David J

2016-01-01

Research with humans and other animals suggests that walking benefits physical health. Perhaps because these links have been demonstrated in other species, it has been suggested that walking is important to elephant welfare, and that zoo elephant exhibits should be designed to allow for more walking. Our study is the first to address this suggestion empirically by measuring the mean daily walking distance of elephants in North American zoos, determining the factors that are associated with variations in walking distance, and testing for associations between walking and welfare indicators. We used anklets equipped with GPS data loggers to measure outdoor daily walking distance in 56 adult female African (n = 33) and Asian (n = 23) elephants housed in 30 North American zoos. We collected 259 days of data and determined associations between distance walked and social, housing, management, and demographic factors. Elephants walked an average of 5.3 km/day with no significant difference between species. In our multivariable model, more diverse feeding regimens were correlated with increased walking, and elephants who were fed on a temporally unpredictable feeding schedule walked 1.29 km/day more than elephants fed on a predictable schedule. Distance walked was also positively correlated with an increase in the number of social groupings and negatively correlated with age. We found a small but significant negative correlation between distance walked and nighttime Space Experience, but no other associations between walking distances and exhibit size were found. Finally, distance walked was not related to health or behavioral outcomes including foot health, joint health, body condition, and the performance of stereotypic behavior, suggesting that more research is necessary to determine explicitly how differences in walking may impact elephant welfare.

Feasibility of Using the Marginal Blood Vessels as Reference Landmarks for CT Colonography

PubMed Central

Wei, Zhuoshi; Yao, Jianhua; Wang, Shijun; Liu, Jiamin; Dwyer, Andrew J.; Pickhardt, Perry J.; Nowinski, Wieslaw L.; Summers, Ronald M.

2015-01-01

OBJECTIVE The purpose of this study was to show the spatial relationship of the colonic marginal blood vessels and the teniae coli on CT colonography (CTC) and the use of the marginal blood vessels for supine-prone registration of polyps and for determination of proper connectivity of collapsed colonic segments. MATERIALS AND METHODS We manually labeled the marginal blood vessels on 15 CTC examinations. Colon segmentation, centerline extraction, teniae detection, and teniae identification were automatically performed. For assessment of their spatial relationships, the distances from the marginal blood vessels to the three teniae coli and to the colon were measured. Student t tests (paired, two-tailed) were performed to evaluate the differences among these distances. To evaluate the reliability of the marginal vessels as reference points for polyp correlation, we analyzed 20 polyps from 20 additional patients who underwent supine and prone CTC. The average difference of the circumferential polyp position on the supine and prone scans was computed. Student t tests (paired, two-tailed) were performed to evaluate the supine-prone differences of the distance. We performed a study on 10 CTC studies from 10 patients with collapsed colonic segments by manually tracing the marginal blood vessels near the collapsed regions to resolve the ambiguity of the colon path. RESULTS The average distances (± SD) from the marginal blood vessels to the tenia mesocolica, tenia omentalis, and tenia libera were 20.1 ± 3.1 mm (95% CI, 18.5–21.6 mm), 39.5 ± 4.8 mm (37.1–42.0 mm), and 36.9 ± 4.2 mm (34.8–39.1 mm), respectively. Pairwise comparison showed that these distances to the tenia libera and tenia omentalis were significantly different from the distance to the tenia mesocolica (p < 0.001). The average distance from the marginal blood vessels to the colon wall was 15.3 ± 2.0 mm (14.2–16.3 mm). For polyp localization, the average difference of the circumferential polyp position on the supine and prone scans was 9.6 ± 9.4 mm (5.5–13.7 mm) (p = 0.15) and expressed as a percentage of the colon circumference was 3.1% ± 2.0% (2.3–4.0%) (p = 0.83). We were able to trace the marginal blood vessels for 10 collapsed colonic segments and determine the paths of the colon in these regions. CONCLUSION The marginal blood vessels run parallel to the colon in proximity to the tenia mesocolica and enable accurate supine-prone registration of polyps and localization of the colon path in areas of collapse. Thus, the marginal blood vessels may be used as reference landmarks complementary to the colon centerline and teniae coli. PMID:24370165

Compliance boundaries for multiple-frequency base station antennas in three directions.

PubMed

Thielens, Arno; Vermeeren, Günter; Kurup, Divya; Joseph, Wout; Martens, Luc

2013-09-01

In this article, compliance boundaries and allowed output powers are determined for the front, back, and side of multiple-frequency base station antennas, based on the root-mean-squared electric field, the whole-body averaged specific absorption rate (SAR), and the 10 g averaged SAR in both the limbs and the head and trunk. For this purpose, the basic restrictions and reference levels defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) for both the general public and occupational exposure are used. The antennas are designed for Global System for Mobile Communications around 900 MHz (GSM900), GSM1800, High Speed Packet Access (HSPA), and Long Term Evolution (LTE), and are operated with output powers at the individual frequencies up to 300 W. The compliance boundaries are estimated using finite-difference time-domain simulations with the Virtual Family Male and have been determined for three directions with respect to the antennas for 800, 900, 1800, and 2600 MHz. The reference levels are not always conservative when the radiating part of the antenna is small compared to the length of the body. Combined compliance distances, which ensure compliance with all reference levels and basic restrictions, have also been determined for each frequency. A method to determine a conservative estimation of compliance boundaries for multiple-frequency (cumulative) exposure is introduced. Using the errors on the estimated allowed powers, an uncertainty analysis is carried out for the compliance distances. Uncertainties on the compliance distances are found to be smaller than 122%. Copyright © 2013 Wiley Periodicals, Inc.

Effects of age and step length on joint kinetics during stepping task.

PubMed

Bieryla, Kathleen A; Buffinton, Christine

2015-07-16

Following a balance perturbation, a stepping response is commonly used to regain support, and the distance of the recovery step can vary. To date, no other studies have examined joint kinetics in young and old adults during increasing step distances, when participants are required to bring their rear foot forward. Therefore, the purpose of this study was to examine age-related differences in joint kinetics with increasing step distance. Twenty young and 20 old adults completed the study. Participants completed a step starting from double support, at an initial distance equal to the individual's average step length. The distance was increased by 10% body height until an unsuccessful attempt. A one-way, repeated measures ANOVA was used to determine the effects of age on joint kinetics during the maximum step distance. A two-way, repeated measures, mixed model ANOVA was used to determine the effects of age, step distance, and their interaction on joint kinetics during the first three step distances for all participants. Young adults completed a significantly longer step than old adults. During the maximum step, in general, kinetic measures were greater in the young than in the old. As step distance increased, all but one kinetic measure increased for both young and old adults. This study has shown the ability to discriminate between young and old adults, and could potentially be used in the future to distinguish between fallers and non-fallers. Copyright © 2015 Elsevier Ltd. All rights reserved.

Performance analysis of deciduous morphology for detecting biological siblings.

PubMed

Paul, Kathleen S; Stojanowski, Christopher M

2015-08-01

Family-centered burial practices influence cemetery structure and can represent social group composition in both modern and ancient contexts. In ancient sites dental phenotypic data are often used as proxies for underlying genotypes to identify potential biological relatives. Here, we test the performance of deciduous dental morphological traits for differentiating sibling pairs from unrelated individuals from the same population. We collected 46 deciduous morphological traits for 69 sibling pairs from the Burlington Growth Centre's long term Family Study. Deciduous crown features were recorded following published standards. After variable winnowing, inter-individual Euclidean distances were generated using 20 morphological traits. To determine whether sibling pairs are more phenotypically similar than expected by chance we used bootstrap resampling of distances to generate P values. Multidimensional scaling (MDS) plots were used to evaluate the degree of clustering among sibling pairs. Results indicate an average distance between siblings of 0.252, which is significantly less than 9,999 replicated averages of 69 resampled pseudo-distances generated from: 1) a sample of non-relative pairs (P < 0.001), and 2) a sample of relative and non-relative pairs (P < 0.001). MDS plots indicate moderate to strong clustering among siblings; families occupied 3.83% of the multidimensional space on average (versus 63.10% for the total sample). Deciduous crown morphology performed well in identifying related sibling pairs. However, there was considerable variation in the extent to which different families exhibited similarly low levels of phenotypic divergence. © 2015 Wiley Periodicals, Inc.

Foveal Curvature and Asymmetry Assessed Using Optical Coherence Tomography.

PubMed

VanNasdale, Dean A; Eilerman, Amanda; Zimmerman, Aaron; Lai, Nicky; Ramsey, Keith; Sinnott, Loraine T

2017-06-01

The aims of this study were to use cross-sectional optical coherence tomography imaging and custom curve fitting software to evaluate and model the foveal curvature as a spherical surface and to compare the radius of curvature in the horizontal and vertical meridians and test the sensitivity of this technique to anticipated meridional differences. Six 30-degree foveal-centered radial optical coherence tomography cross-section scans were acquired in the right eye of 20 clinically normal subjects. Cross sections were manually segmented, and custom curve fitting software was used to determine foveal pit radius of curvature using the central 500, 1000, and 1500 μm of the foveal contour. Radius of curvature was compared across different fitting distances. Root mean square error was used to determine goodness of fit. The radius of curvature was compared between the horizontal and vertical meridians for each fitting distance. There radius of curvature was significantly different when comparing each of the three fitting distances (P < .01 for each comparison). The average radii of curvature were 970 μm (95% confidence interval [CI], 913 to 1028 μm), 1386 μm (95% CI, 1339 to 1439 μm), and 2121 μm (95% CI, 2066 to 2183) for the 500-, 1000-, and 1500-μm fitting distances, respectively. Root mean square error was also significantly different when comparing each fitting distance (P < .01 for each comparison). The average root mean square errors were 2.48 μm (95% CI, 2.41 to 2.53 μm), 6.22 μm (95% CI, 5.77 to 6.60 μm), and 13.82 μm (95% CI, 12.93 to 14.58 μm) for the 500-, 1000-, and 1500-μm fitting distances, respectively. The radius of curvature between the horizontal and vertical meridian radii was statistically different only in the 1000- and 1500-μm fitting distances (P < .01 for each), with the horizontal meridian being flatter than the vertical. The foveal contour can be modeled as a sphere with low curve fitting error over a limited distance and capable of detecting subtle foveal contour differences between meridians.

Astrometry With the Hubble Space Telescope: Trigonometric Parallaxes of Planetary Nebula Nuclei NGC 6853, NGC 7293, ABELL 31, and DeHt 5

NASA Technical Reports Server (NTRS)

Benedict, G. F.; McArthur, Barbara E.; Napiwotzki, Ralf; Harrison, Thomas E.; Harris, Hugh C.; Nelan, Edmund; Bond, Howard E; Patterson, Richard J.; Ciardullo, Robin

2009-01-01

We present absolute parallaxes and relative proper motions for the central stars of the planetary nebulae NGC 6853 (The Dumbbell), NGC 7293 (The Helix), Abell 31, and DeHt 5. This paper details our reduction and analysis using DeHt 5 as an example. We obtain these planetary nebula nuclei (PNNi) parallaxes with astrometric data from Fine Guidance Sensors FGS 1r and FGS 3, white-light interferometers on the Hubble Space Telescope. Proper motions, spectral classifications and VJHKT2M and DDO51 photometry of the stars comprising the astrometric reference frames provide spectrophotometric estimates of reference star absolute parallaxes. Introducing these into our model as observations with error, we determine absolute parallaxes for each PNN. Weighted averaging with previous independent parallax measurements yields an average parallax precision, sigma (sub pi)/ pi = 5%. Derived distances are: d(sub NGC6853) = 405(exp +28 sub -25) pc, d(sub NGC7293) = 216(exp +14 sub -12) pc, d(sub Abell31) = 621(exp +91 sub -70) pc, and d(sub DeHt5) = 345(exp +19 sub -17) pc. These PNNi distances are all smaller than previously derived from spectroscopic analyses of the central stars. To obtain absolute magnitudes from these distances requires estimates of interstellar extinction. We average extinction measurements culled from the literature, from reddening based on PNNi intrinsic colors derived from model SEDs, and an assumption that each PNN experiences the same rate of extinction as a function of distance as do the reference stars nearest (in angular separation) to each central star. We also apply Lutz-Kelker bias corrections. The absolute magnitudes and effective temperatures permit estimates of PNNi radii through both the Stefan-Boltzmann relation and Eddington fluxes. Comparing absolute magnitudes with post-AGB models provides mass estimates. Masses cluster around 0.57 solar Mass, close to the peak of the white dwarf mass distribution. Adding a few more PNNi with well-determined distances and masses, we compare all the PNNi with cooler white dwarfs of similar mass, and confirm, as expected, that PNNi have larger radii than white dwarfs that have reached their final cooling tracks.

Multilevel lumbar fusion and postoperative physiotherapy rehabilitation in a patient with persistent pain.

PubMed

Pons, Tracey; Shipton, Edward A

2011-04-01

There are no comparative randomised controlled trials of physiotherapy modalities for chronic low back and radicular pain associated with multilevel fusion. Physiotherapy-based rehabilitation to control pain and improve activation levels for persistent pain following multilevel fusion can be challenging. This is a case report of a 68-year-old man who was referred for physiotherapy intervention 10 months after a multilevel spinal fusion for spinal stenosis. He reported high levels of persistent postoperative pain with minimal activity as a consequence of his pain following the surgery. The physiotherapy interventions consisted of three phases of rehabilitation starting with pool exercise that progressed to land-based walking. These were all combined with transcutaneous electrical nerve stimulation (TENS) that was used consistently for up to 8 hours per day. As outcome measures, daily pain levels and walking distances were charted once the pool programme was completed (in the third phase). Phase progression was determined by shuttle test results. The pain level was correlated with the distance walked using linear regression over a 5-day average. Over a 5-day moving average, the pain level reduced and walking distance increased. The chart of recorded pain level and walking distance showed a trend toward decreased pain with the increased distance walked. In a patient undergoing multilevel lumbar fusion, the combined use of TENS and a progressive walking programme (from pool to land) reduced pain and increased walking distance. This improvement was despite poor medication compliance and a reported high level of postsurgical pain.

Mutually unbiased bases in six dimensions: The four most distant bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raynal, Philippe; Lue Xin; Englert, Berthold-Georg

2011-06-15

We consider the average distance between four bases in six dimensions. The distance between two orthonormal bases vanishes when the bases are the same, and the distance reaches its maximal value of unity when the bases are unbiased. We perform a numerical search for the maximum average distance and find it to be strictly smaller than unity. This is strong evidence that no four mutually unbiased bases exist in six dimensions. We also provide a two-parameter family of three bases which, together with the canonical basis, reach the numerically found maximum of the average distance, and we conduct a detailedmore » study of the structure of the extremal set of bases.« less

On geometric distance determination to the Cepheid RS Puppis from its light echoes

NASA Astrophysics Data System (ADS)

Bond, H. E.; Sparks, W. B.

2009-02-01

Context: The luminous Galactic Cepheid RS Puppis is unique in being surrounded by a dust nebula illuminated by the variable light of the Cepheid. In a recent paper in this journal, Kervella et al. (2008) report a very precise geometric distance to RS Pup, based on measured phase lags of the light variations of individual knots in the reflection nebula. Aims: In this commentary, we examine the validity of the distance measurement, as well as the reality of the spatial structure of the nebula determined by Feast (2008) based upon the phase lags of the knots. Methods: Kervella et al. assumed that the illuminated dust knots lie, on average, in the plane of the sky (otherwise it is not possible to derive a geometric distance from direct imaging of light echoes). We consider the biasing introduced by the high efficiency of forward scattering. Results: We conclude that most of the knots are in fact likely to lie in front of the plane of the sky, thus invalidating the Kervella et al. result. We also show that the flat equatorial disk structure determined by Feast is unlikely; instead, the morphology of the nebula is more probably bipolar, with a significant tilt of its axis with respect to the plane of the sky. Conclusions: Although the Kervella et al. distance result is invalidated, we show that high-resolution polarimetric imaging has the potential to yield a valid geometric distance to this important Cepheid.

Radio frequency electromagnetic field compliance assessment of multi-band and MIMO equipped radio base stations.

PubMed

Thors, Björn; Thielens, Arno; Fridén, Jonas; Colombi, Davide; Törnevik, Christer; Vermeeren, Günter; Martens, Luc; Joseph, Wout

2014-05-01

In this paper, different methods for practical numerical radio frequency exposure compliance assessments of radio base station products were investigated. Both multi-band base station antennas and antennas designed for multiple input multiple output (MIMO) transmission schemes were considered. For the multi-band case, various standardized assessment methods were evaluated in terms of resulting compliance distance with respect to the reference levels and basic restrictions of the International Commission on Non-Ionizing Radiation Protection. Both single frequency and multiple frequency (cumulative) compliance distances were determined using numerical simulations for a mobile communication base station antenna transmitting in four frequency bands between 800 and 2600 MHz. The assessments were conducted in terms of root-mean-squared electromagnetic fields, whole-body averaged specific absorption rate (SAR) and peak 10 g averaged SAR. In general, assessments based on peak field strengths were found to be less computationally intensive, but lead to larger compliance distances than spatial averaging of electromagnetic fields used in combination with localized SAR assessments. For adult exposure, the results indicated that even shorter compliance distances were obtained by using assessments based on localized and whole-body SAR. Numerical simulations, using base station products employing MIMO transmission schemes, were performed as well and were in agreement with reference measurements. The applicability of various field combination methods for correlated exposure was investigated, and best estimate methods were proposed. Our results showed that field combining methods generally considered as conservative could be used to efficiently assess compliance boundary dimensions of single- and dual-polarized multicolumn base station antennas with only minor increases in compliance distances. © 2014 Wiley Periodicals, Inc.

Streamwise Versus Spanwise Spacing of Obstacle Arrays: Parametrization of the Effects on Drag and Turbulence

NASA Astrophysics Data System (ADS)

Simón-Moral, Andres; Santiago, Jose Luis; Krayenhoff, E. Scott; Martilli, Alberto

2014-06-01

A Reynolds-averaged Navier-Stokes model is used to investigate the evolution of the sectional drag coefficient and turbulent length scales with the layouts of aligned arrays of cubes. Results show that the sectional drag coefficient is determined by the non-dimensional streamwise distance (sheltering parameter), and the non-dimensional spanwise distance (channelling parameter) between obstacles. This is different than previous approaches that consider only plan area density . On the other hand, turbulent length scales behave similarly to the staggered case (e. g. they are function of only). Analytical formulae are proposed for the length scales and for the sectional drag coefficient as a function of sheltering and channelling parameters, and implemented in a column model. This approach demonstrates good skill in the prediction of vertical profiles of the spatially-averaged horizontal wind speed.

41 CFR 302-4.201 - How are my authorized en route travel days and per diem determined for relocation travel?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Contracts and Property Management Federal Travel Regulation System RELOCATION ALLOWANCES PERMANENT CHANGE OF... driving distance shall be not less than an average of 300 miles per calendar day. An exception to the... handicapped; or for other reasons acceptable to the agency. ...

Ab Initio Potential Energy Surface for H-H2

NASA Technical Reports Server (NTRS)

Patridge, Harry; Bauschlicher, Charles W., Jr.; Stallcop, James R.; Levin, Eugene

1993-01-01

Ab initio calculations employing large basis sets are performed to determine an accurate potential energy surface for H-H2 interactions for a broad range of separation distances. At large distances, the spherically averaged potential determined from the calculated energies agrees well with the corresponding results determined from dispersion coefficients; the van der Waals well depth is predicted to be 75 +/- 3 micro E(h). Large basis sets have also been applied to reexamine the accuracy of theoretical repulsive potential energy surfaces (25-70 kcal/mol above the H-H2 asymptote) at small interatomic separations; the Boothroyd, Keogh, Martin, and Peterson (BKMP) potential energy surface is found to agree with results of the present calculations within the expected uncertainty (+/- 1 kcal/mol) of the fit. Multipolar expansions of the computed H-H2 potential energy surface are reported for four internuclear separation distances (1.2, 1.401, 1.449, and 1.7a(0)) of the hydrogen molecule. The differential elastic scattering cross section calculated from the present results is compared with the measurements from a crossed beam experiment.

Pilot study for quantifying driving characteristics during power wheelchair soccer.

PubMed

Kumar, Amit; Karmarkar, Amol M; Collins, Diane M; Souza, Ana; Oyster, Michelle L; Cooper, Rosemarie; Cooper, Rory A

2012-01-01

This study determined the driving characteristics of wheelchair users during power wheelchair soccer games. Data for this study were collected at the 28th and 29th National Veterans Wheelchair Games. Nineteen veterans who were 18 years or older and power wheelchair soccer players completed a brief demographic survey and provided information about their power wheelchairs. A customized data-logging device was placed on each participant's wheelchair before power soccer game participation. The data logger was removed at the end of the final game for each participant. The average distance traveled during the games was 899.5 +/- 592.5 m, and the average maximum continuous distance traveled was 256.0 +/- 209.4 m. The average wheelchair speed was 0.8 +/- 0.2 m/s, and the average duration of driving time was 17.6 +/- 8.3 min. Average proportion of time spent at a speed >1 m/s was 30.7% +/- 33.8%, between 0.5 and 1 m/s was 16.2% +/- 34.4%, and <0.5 m/s was 21.4% +/- 24.3%. The information from this descriptive study provides insight for future research in the field of adapted sports for people with high levels of impairments who use power wheelchairs for their mobility.

Inferring properties of disordered chains from FRET transfer efficiencies

NASA Astrophysics Data System (ADS)

Zheng, Wenwei; Zerze, Gül H.; Borgia, Alessandro; Mittal, Jeetain; Schuler, Benjamin; Best, Robert B.

2018-03-01

Förster resonance energy transfer (FRET) is a powerful tool for elucidating both structural and dynamic properties of unfolded or disordered biomolecules, especially in single-molecule experiments. However, the key observables, namely, the mean transfer efficiency and fluorescence lifetimes of the donor and acceptor chromophores, are averaged over a broad distribution of donor-acceptor distances. The inferred average properties of the ensemble therefore depend on the form of the model distribution chosen to describe the distance, as has been widely recognized. In addition, while the distribution for one type of polymer model may be appropriate for a chain under a given set of physico-chemical conditions, it may not be suitable for the same chain in a different environment so that even an apparently consistent application of the same model over all conditions may distort the apparent changes in chain dimensions with variation of temperature or solution composition. Here, we present an alternative and straightforward approach to determining ensemble properties from FRET data, in which the polymer scaling exponent is allowed to vary with solution conditions. In its simplest form, it requires either the mean FRET efficiency or fluorescence lifetime information. In order to test the accuracy of the method, we have utilized both synthetic FRET data from implicit and explicit solvent simulations for 30 different protein sequences, and experimental single-molecule FRET data for an intrinsically disordered and a denatured protein. In all cases, we find that the inferred radii of gyration are within 10% of the true values, thus providing higher accuracy than simpler polymer models. In addition, the scaling exponents obtained by our procedure are in good agreement with those determined directly from the molecular ensemble. Our approach can in principle be generalized to treating other ensemble-averaged functions of intramolecular distances from experimental data.

Derivation of Hamaker Dispersion Energy of Amorphous Carbon Surfaces in Contact with Liquids Using Photoelectron Energy-Loss Spectra

NASA Astrophysics Data System (ADS)

Godet, Christian; David, Denis

2017-12-01

Hamaker interaction energies and cutoff distances have been calculated for disordered carbon films, in contact with purely dispersive (diiodomethane) or polar (water) liquids, using their experimental dielectric functions ɛ ( q, ω) obtained over a broad energy range. In contrast with previous works, a q-averaged < ɛ ( q, ω) > q is derived from photoelectron energy-loss spectroscopy (XPS-PEELS) where the energy loss function (ELF) < Im[-1/ ɛ ( q, ω)] > q is a weighted average over allowed transferred wave vector values, q, given by the physics of bulk plasmon excitation. For microcrystalline diamond and amorphous carbon films with a wide range of (sp3/sp2 + sp3) hybridization, non-retarded Hamaker energies, A 132 ( L < 1 nm), were calculated in several configurations, and distance and wavenumber cutoff values were then calculated based on A 132 and the dispersive work of adhesion obtained from contact angles. A geometric average approximation, H 0 CVL = ( H 0 CVC H 0 LVL )1/2, holds for the cutoff separation distances obtained for carbon-vacuum-liquid (CVL), carbon-vacuum-carbon (CVC) and liquid-vacuum-liquid (LVL) equilibrium configurations. The linear dependence found for A CVL, A CLC and A CLV values as a function of A CVC, for each liquid, allows predictive relationships for Hamaker energies (in any configuration) using experimental determination of the dispersive component of the surface tension, {γ}_{CV}^d , and a guess value of the cutoff distance H 0 CVC of the solid. [Figure not available: see fulltext.

End-to-end distance and contour length distribution functions of DNA helices

NASA Astrophysics Data System (ADS)

Zoli, Marco

2018-06-01

I present a computational method to evaluate the end-to-end and the contour length distribution functions of short DNA molecules described by a mesoscopic Hamiltonian. The method generates a large statistical ensemble of possible configurations for each dimer in the sequence, selects the global equilibrium twist conformation for the molecule, and determines the average base pair distances along the molecule backbone. Integrating over the base pair radial and angular fluctuations, I derive the room temperature distribution functions as a function of the sequence length. The obtained values for the most probable end-to-end distance and contour length distance, providing a measure of the global molecule size, are used to examine the DNA flexibility at short length scales. It is found that, also in molecules with less than ˜60 base pairs, coiled configurations maintain a large statistical weight and, consistently, the persistence lengths may be much smaller than in kilo-base DNA.

Local Elastic Constants for Epoxy-Nanotube Composites from Molecular Dynamics Simulation

NASA Technical Reports Server (NTRS)

Frankland, S. J. V.; Gates, T. S.

2007-01-01

A method from molecular dynamics simulation is developed for determining local elastic constants of an epoxy/nanotube composite. The local values of C11, C33, K12, and K13 elastic constants are calculated for an epoxy/nanotube composite as a function of radial distance from the nanotube. While the results possess a significant amount of statistical uncertainty resulting from both the numerical analysis and the molecular fluctuations during the simulation, the following observations can be made. If the size of the region around the nanotube is increased from shells of 1 to 6 in thickness, then the scatter in the data reduces enough to observe trends. All the elastic constants determined are at a minimum 20 from the center of the nanotube. The C11, C33, and K12 follow similar trends as a function of radial distance from the nanotube. The K13 decreases greater distances from the nanotube and becomes negative which may be a symptom of the statistical averaging.

Comparison of the backward overhead medicine ball throw to power production in college football players.

PubMed

Mayhew, Jerry L; Bird, Michael; Cole, Mary L; Koch, Alex J; Jacques, Jeff A; Ware, John S; Buford, Brittney N; Fletcher, Kate M

2005-08-01

The purpose of this study was to determine the relationship of the backward overhead medicine ball (BOMB) throw to power production in college football players. Forty National Collegiate Athletic Association Division II college football players were studied at the end of an 8-week off-season conditioning program for power output determined from a countermovement vertical jump on a force plate and for maximal distance in the standing BOMB throw. Although the reliability of the BOMB test was high (interclass correlation coefficient = 0.86), there was a significant learning effect across 3 trials (p < 0.01). Peak and average powers generated during the vertical jump correlated moderately but significantly with the best BOMB throw distance (r = 0.59 and 0.63, respectively). Considering power relative to body mass or lean body mass failed to produce significant correlations with BOMB throw distance (r = 0.27 and 0.28, respectively). Therefore, the BOMB throw may have limited potential as a predictor of total body explosive power in college football players.

[Diagnosis of electron energy and comparative effects of OH, O or O3 on NO oxidation in pulsed corona discharge].

PubMed

Xuan, Jian-yong; Luo, Zhong-yang; Zhao, Lei; Jiang, Jian-ping; Gao, Xiang

2012-05-01

The spectrum of excited N2 molecules and ions was measured by optical emission spectroscopy in pulsed corona discharge with a wire-to-plate reactor. The ratio of emission intensities emitted by the excited molecules and ions of N2 was compared with numerical simulation to determine average electron energies and electric field distributions. Within 2 cm distance from wire electrode in horizontal and vertical directions, electric field and average electron energies appear to be in the ranges of 11.05 19.6 MV x m(-1) and 10.10-13.92 eV respectively; as the distance increases, average electron energies and electric field show a similar trend: first decrease and then increase. Chemically active species, such as OH, O and O3, can be generated through the energetic electron collisions with H2O and O2 directly or indirectly. For the NO oxidation, there is no coexistence of NO and O3, whereas there is a coexistence of NO and OH. NO is oxidized by O3 or O more efficiently than by OH radical.

Emission characteristics of offshore fishing ships in the Yellow Bo Sea, China.

PubMed

Liu, Yingshuai; Ge, Yunshan; Tan, Jianwei; Fu, Mingliang; Shah, Asad Naeem; Li, Luqiang; Ji, Zhe; Ding, Yan

2018-03-01

Maritime transport has been playing a decisive role in global trade. Its contribution to the air pollution of the sea and coastal areas has been widely recognized. The air pollutant emission inventories of several harbors in China have already been established. However, the emission factors of local ships have not been addressed comprehensively, and thus are lacking from the emission inventories. In this study, on-board emission tests of eight diesel-powered offshore fishing ships were conducted near the coastal region of the northern Yellow Bo Sea fishing ground of Dalian, China. Results show that large amounts of fine particles (<0.5μm, 90%) were found in maneuvering mode, which were about five times higher than those during cruise mode. Emission rates as well as emission factors based on both distance and fuel were determined during the cruise and maneuvering modes (including departure and arrival). Average emission rates and distance-based emission factors of CO, HC and PM were much higher during the maneuvering mode as compared with the cruise mode. However, the average emission rate of Nitrous Oxide (NO x ) was higher during the cruise mode as compared with the maneuvering modes. On the contrary, the average distance-based emission factors of NO x were lower during the cruise mode relative to the maneuvering mode due to the low sailing speed of the latter. Copyright © 2017. Published by Elsevier B.V.

Development of an Automated Modality-Independent Elastographic Image Analysis System for Tumor Screening

DTIC Science & Technology

2007-02-01

determined by its neighbors’ correspondence. Thus, the algorithm consists of four main steps: ICP registration of the base and nipple regions of the...the nipple and the base of the breast, as a location for accurately determining initial correspondence. However, due to the compression, the nipple of...cloud) is translated and lies at a different angle than the nipple of the pendant breast (the source point cloud). By minimizing the average distance

The locomotor activity of soccer players based on playing positions during the 2010 World Cup.

PubMed

Soroka, Andrzej

2018-06-01

The aim of this study was to define the locomotor activity of footballer players during the 2010 World Cup and to assess what differences existed among different playing positions. Research was conducted using research material collected from the Castrol Performance Index, a kinematic game analysis system that records player movements during a game by use of semi-automatic cameras. A total of 599 players who participated in the championships were analyzed. The results were evaluated using one-way analysis of variance (ANOVA) and a post-hoc test that calculated the Honestly Significant Difference (HSD) in order to determine which mean values significantly differed among the player positions. It was found that midfielders covered on average the largest distance during a match (10,777.6 m, P<0.001) as well as performing the most locomotor activity at high and sprint intensities (2936.8 m and 108.4 m, respectively). Additionally, midfielders also spent the largest amount of time at performing at a high intensity (10.6%). Strikers also featured high levels of the above parameters; the total length of distance covered with high intensities was found to be on average 2586.7 m, the distance covered at sprint intensity was 105 m. The footballers, playing at the championship level feature excellent locomotor preparation. This fact is undoubtedly supported by the aerobic training of high intensity. Such training allows footballers to extend the distance they cover during the match, increase the intensity of locomotor activities and sprint speed distance.

Costs of Multidisciplinary Parenteral Nutrition Care Provided at a Distance via Mobile Tablets

PubMed Central

Kim, Heejung; Spaulding, Ryan; Werkowitch, Marilyn; Yadrich, Donna; Piamjariyakul, Ubolrat; Gilroy, Richard; Smith, Carol E.

2014-01-01

Background Determining the costs of healthcare delivery is a key step for providing efficient nutrition-based care. This analysis tabulates the costs of delivering home parenteral nutrition (HPN) interventions and clinical assessments through encrypted mobile technologies to increase patients’ access to healthcare providers, reduce their travel expenses, and allow early detection of infection and other complications. Methods A traditional cost-accounting method was used to tabulate all expenses related to mobile distance HPN clinic appointments, including (1) personnel time of multidisciplinary healthcare professionals, (2) supply of HPN intervention materials, and (3) equipment, connection, and delivery expenses. Results A total of 20 mobile distance clinic appointments were conducted for an average of 56 minutes each with 45 patients who required HPN infusion care. The initial setup costs included mobile tablet devices, 4G data plans, and personnel's time as well as intervention materials. The initial costs were on average $916.64 per patient, while the follow-up clinic appointments required $361.63 a month, with these costs continuing to decline as the equipment was used by multiple patients more frequently over time. Patients reported high levels of satisfaction with cost savings in travel expenses and rated the quality of care comparable to traditional in-person examinations. Conclusion This study provides important aspects of the initial cost tabulation for visual assessment for HPN appointments. These findings will be used to generate a decision algorithm for scheduling mobile distance clinic appointments intermittent with in-person visits to determine how to lower costs of nutrition assessments. To maximize the cost benefits, clinical trials must continue to collect clinical outcomes. PMID:25245253

Method paper--distance and travel time to casualty clinics in Norway based on crowdsourced postcode coordinates: a comparison with other methods.

PubMed

Raknes, Guttorm; Hunskaar, Steinar

2014-01-01

We describe a method that uses crowdsourced postcode coordinates and Google maps to estimate average distance and travel time for inhabitants of a municipality to a casualty clinic in Norway. The new method was compared with methods based on population centroids, median distance and town hall location, and we used it to examine how distance affects the utilisation of out-of-hours primary care services. At short distances our method showed good correlation with mean travel time and distance. The utilisation of out-of-hours services correlated with postcode based distances similar to previous research. The results show that our method is a reliable and useful tool for estimating average travel distances and travel times.

Thermal motion in proteins: Large effects on the time-averaged interaction energies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goethe, Martin, E-mail: martingoethe@ub.edu; Rubi, J. Miguel; Fita, Ignacio

As a consequence of thermal motion, inter-atomic distances in proteins fluctuate strongly around their average values, and hence, also interaction energies (i.e. the pair-potentials evaluated at the fluctuating distances) are not constant in time but exhibit pronounced fluctuations. These fluctuations cause that time-averaged interaction energies do generally not coincide with the energy values obtained by evaluating the pair-potentials at the average distances. More precisely, time-averaged interaction energies behave typically smoother in terms of the average distance than the corresponding pair-potentials. This averaging effect is referred to as the thermal smoothing effect. Here, we estimate the strength of the thermal smoothingmore » effect on the Lennard-Jones pair-potential for globular proteins at ambient conditions using x-ray diffraction and simulation data of a representative set of proteins. For specific atom species, we find a significant smoothing effect where the time-averaged interaction energy of a single atom pair can differ by various tens of cal/mol from the Lennard-Jones potential at the average distance. Importantly, we observe a dependency of the effect on the local environment of the involved atoms. The effect is typically weaker for bulky backbone atoms in beta sheets than for side-chain atoms belonging to other secondary structure on the surface of the protein. The results of this work have important practical implications for protein software relying on free energy expressions. We show that the accuracy of free energy expressions can largely be increased by introducing environment specific Lennard-Jones parameters accounting for the fact that the typical thermal motion of protein atoms depends strongly on their local environment.« less

Thermal motion in proteins: Large effects on the time-averaged interaction energies

NASA Astrophysics Data System (ADS)

Goethe, Martin; Fita, Ignacio; Rubi, J. Miguel

2016-03-01

As a consequence of thermal motion, inter-atomic distances in proteins fluctuate strongly around their average values, and hence, also interaction energies (i.e. the pair-potentials evaluated at the fluctuating distances) are not constant in time but exhibit pronounced fluctuations. These fluctuations cause that time-averaged interaction energies do generally not coincide with the energy values obtained by evaluating the pair-potentials at the average distances. More precisely, time-averaged interaction energies behave typically smoother in terms of the average distance than the corresponding pair-potentials. This averaging effect is referred to as the thermal smoothing effect. Here, we estimate the strength of the thermal smoothing effect on the Lennard-Jones pair-potential for globular proteins at ambient conditions using x-ray diffraction and simulation data of a representative set of proteins. For specific atom species, we find a significant smoothing effect where the time-averaged interaction energy of a single atom pair can differ by various tens of cal/mol from the Lennard-Jones potential at the average distance. Importantly, we observe a dependency of the effect on the local environment of the involved atoms. The effect is typically weaker for bulky backbone atoms in beta sheets than for side-chain atoms belonging to other secondary structure on the surface of the protein. The results of this work have important practical implications for protein software relying on free energy expressions. We show that the accuracy of free energy expressions can largely be increased by introducing environment specific Lennard-Jones parameters accounting for the fact that the typical thermal motion of protein atoms depends strongly on their local environment.

Dosimetry of 192Ir sources used for endovascular brachytherapy

NASA Astrophysics Data System (ADS)

Reynaert, N.; Van Eijkeren, M.; Taeymans, Y.; Thierens, H.

2001-02-01

An in-phantom calibration technique for 192Ir sources used for endovascular brachytherapy is presented. Three different source lengths were investigated. The calibration was performed in a solid phantom using a Farmer-type ionization chamber at source to detector distances ranging from 1 cm to 5 cm. The dosimetry protocol for medium-energy x-rays extended with a volume-averaging correction factor was used to convert the chamber reading to dose to water. The air kerma strength of the sources was determined as well. EGS4 Monte Carlo calculations were performed to determine the depth dose distribution at distances ranging from 0.6 mm to 10 cm from the source centre. In this way we were able to convert the absolute dose rate at 1 cm distance to the reference point chosen at 2 mm distance. The Monte Carlo results were confirmed by radiochromic film measurements, performed with a double-exposure technique. The dwell times to deliver a dose of 14 Gy at the reference point were determined and compared with results given by the source supplier (CORDIS). They determined the dwell times from a Sievert integration technique based on the source activity. The results from both methods agreed to within 2% for the 12 sources that were evaluated. A Visual Basic routine that superimposes dose distributions, based on the Monte Carlo calculations and the in-phantom calibration, onto intravascular ultrasound images is presented. This routine can be used as an online treatment planning program.

Google Maps offers a new way to evaluate claudication.

PubMed

Khambati, Husain; Boles, Kim; Jetty, Prasad

2017-05-01

Accurate determination of walking capacity is important for the clinical diagnosis and management plan for patients with peripheral arterial disease. The current "gold standard" of measurement is walking distance on a treadmill. However, treadmill testing is not always reflective of the patient's natural walking conditions, and it may not be fully accessible in every vascular clinic. The objective of this study was to determine whether Google Maps, the readily available GPS-based mapping tool, offers an accurate and accessible method of evaluating walking distances in vascular claudication patients. Patients presenting to the outpatient vascular surgery clinic between November 2013 and April 2014 at the Ottawa Hospital with vasculogenic calf, buttock, and thigh claudication symptoms were identified and prospectively enrolled in our study. Onset of claudication symptoms and maximal walking distance (MWD) were evaluated using four tools: history; Walking Impairment Questionnaire (WIQ), a validated claudication survey; Google Maps distance calculator (patients were asked to report their daily walking routes on the Google Maps-based tool runningmap.com, and walking distances were calculated accordingly); and treadmill testing for onset of symptoms and MWD, recorded in a double-blinded fashion. Fifteen patients were recruited for the study. Determination of walking distances using Google Maps proved to be more accurate than by both clinical history and WIQ, correlating highly with the gold standard of treadmill testing for both claudication onset (r = .805; P < .001) and MWD (r = .928; P < .0001). In addition, distances were generally under-reported on history and WIQ. The Google Maps tool was also efficient, with reporting times averaging below 4 minutes. For vascular claudicants with no other walking limitations, Google Maps is a promising new tool that combines the objective strengths of the treadmill test and incorporates real-world walking environments. It offers an accurate, efficient, inexpensive, and readily accessible way to assess walking distances in patients with peripheral vascular disease. Copyright © 2017 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Determination of the myosin step size from mechanical and kinetic data.

PubMed Central

Pate, E; White, H; Cooke, R

1993-01-01

During muscle contraction, work is generated when a myosin cross-bridge attaches to an actin filament and exerts a force on it through some power-stroke distance, h. At the end of this power stroke, attached myosin heads are carried into regions where they exert a negative force on the actin filament (the drag stroke) and where they are released rapidly from actin by ATP binding. Although the length of the power stroke remains controversial, average distance traversed in the drag-stroke region can be determined when one knows both rate of cross-bridge dissociation and filament-sliding velocity. At maximum contraction velocity, the average force exerted in the drag stroke must balance that exerted in the power stroke. We discuss here a simple model of cross-bridge interaction that allows one to calculate the force exerted in the drag stroke and to relate this to the power-stroke distance h traversed by cross-bridges in the positive-force region. Both the rate at which myosin can be dissociated from actin and the velocity at which an actin filament can be translated have been measured for a series of myosin isozymes and for different substrates, producing a wide range of values for each. Nonetheless, we show here that the rate of myosin dissociation from actin correlates well with the velocity of filament sliding, providing support for the simple model presented and suggesting that the power stroke is approximately 10 nm in length. PMID:8460156

Analytic Determination of Interference Thresholds for Microwave Landing System Equipment and TACAN/DME Equipment

DTIC Science & Technology

1980-08-01

terminals for the PD channel, in dB, at function level tD /U]lL pea^,, desired-to-average undesired signal power at the phase-locked loop for successful...listed belows MS Receiver Reparation Distance (nmI) estimated Altitude Uetwen Desired & Undesired MS (Kilo feet) Grcnd Nquipment 2.1 42 10 142 20) 1q3

Mathematical model in post-mortem estimation of brain edema using morphometric parameters.

PubMed

Radojevic, Nemanja; Radnic, Bojana; Vucinic, Jelena; Cukic, Dragana; Lazovic, Ranko; Asanin, Bogdan; Savic, Slobodan

2017-01-01

Current autopsy principles for evaluating the existence of brain edema are based on a macroscopic subjective assessment performed by pathologists. The gold standard is a time-consuming histological verification of the presence of the edema. By measuring the diameters of the cranial cavity, as individually determined morphometric parameters, a mathematical model for rapid evaluation of brain edema was created, based on the brain weight measured during the autopsy. A cohort study was performed on 110 subjects, divided into two groups according to the histological presence or absence of (the - deleted from the text) brain edema. In all subjects, the following measures were determined: the volume and the diameters of the cranial cavity (longitudinal and transverse distance and height), the brain volume, and the brain weight. The complex mathematical algorithm revealed a formula for the coefficient ε, which is useful to conclude whether a brain edema is present or not. The average density of non-edematous brain is 0.967 g/ml, while the average density of edematous brain is 1.148 g/ml. The resulting formula for the coefficient ε is (5.79 x longitudinal distance x transverse distance)/brain weight. Coefficient ε can be calculated using measurements of the diameters of the cranial cavity and the brain weight, performed during the autopsy. If the resulting ε is less than 0.9484, it could be stated that there is cerebral edema with a reliability of 98.5%. The method discussed in this paper aims to eliminate the burden of relying on subjective assessments when determining the presence of a brain edema. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Genetic diversity of popcorn genotypes using molecular analysis.

PubMed

Resh, F S; Scapim, C A; Mangolin, C A; Machado, M F P S; do Amaral, A T; Ramos, H C C; Vivas, M

2015-08-19

In this study, we analyzed dominant molecular markers to estimate the genetic divergence of 26 popcorn genotypes and evaluate whether using various dissimilarity coefficients with these dominant markers influences the results of cluster analysis. Fifteen random amplification of polymorphic DNA primers produced 157 amplified fragments, of which 65 were monomorphic and 92 were polymorphic. To calculate the genetic distances among the 26 genotypes, the complements of the Jaccard, Dice, and Rogers and Tanimoto similarity coefficients were used. A matrix of Dij values (dissimilarity matrix) was constructed, from which the genetic distances among genotypes were represented in a more simplified manner as a dendrogram generated using the unweighted pair-group method with arithmetic average. Clusters determined by molecular analysis generally did not group material from the same parental origin together. The largest genetic distance was between varieties 17 (UNB-2) and 18 (PA-091). In the identification of genotypes with the smallest genetic distance, the 3 coefficients showed no agreement. The 3 dissimilarity coefficients showed no major differences among their grouping patterns because agreement in determining the genotypes with large, medium, and small genetic distances was high. The largest genetic distances were observed for the Rogers and Tanimoto dissimilarity coefficient (0.74), followed by the Jaccard coefficient (0.65) and the Dice coefficient (0.48). The 3 coefficients showed similar estimations for the cophenetic correlation coefficient. Correlations among the matrices generated using the 3 coefficients were positive and had high magnitudes, reflecting strong agreement among the results obtained using the 3 evaluated dissimilarity coefficients.

EAS development curve at energy of 10(16) - 10(18) eV measured by optical Cerenkov light

NASA Technical Reports Server (NTRS)

Hara, T.; Daigo, M.; Honda, M.; Kamata, K.; Kifune, T.; Mizumoto, Y.; Nagano, M.; Ohno, Y.; Tanahasni, G.

1985-01-01

The data of optical Cerenkov light from extensive air shower observed at the core distance more than 1 Km at Akeno are reexamined. Applying the new simulated results, the shower development curves for the individual events were constructed. For the showers of 10 to 17th power eV the average depth at the shower maximum is determined to be 660 + or - 40 gcm/2. The shower curve of average development is found to be well described by a Gaisser-Hillas shower development function with above shower maximum depth.

Cosmological ensemble and directional averages of observables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonvin, Camille; Clarkson, Chris; Durrer, Ruth

We show that at second order, ensemble averages of observables and directional averages do not commute due to gravitational lensing—observing the same thing in many directions over the sky is not the same as taking an ensemble average. In principle this non-commutativity is significant for a variety of quantities that we often use as observables and can lead to a bias in parameter estimation. We derive the relation between the ensemble average and the directional average of an observable, at second order in perturbation theory. We discuss the relevance of these two types of averages for making predictions of cosmologicalmore » observables, focusing on observables related to distances and magnitudes. In particular, we show that the ensemble average of the distance in a given observed direction is increased by gravitational lensing, whereas the directional average of the distance is decreased. For a generic observable, there exists a particular function of the observable that is not affected by second-order lensing perturbations. We also show that standard areas have an advantage over standard rulers, and we discuss the subtleties involved in averaging in the case of supernova observations.« less

Tin Valence and Local Environments in Silicate Glasses as Determined From X-ray Absorption Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKeown,D.; Buechele, A.; Gan, H.

2008-01-01

X-ray absorption spectroscopy (XAS) was used to characterize the tin (Sn) environments in four borosilicate glass nuclear waste formulations, two silicate float glasses, and three potassium aluminosilicate glasses. Sn K-edge XAS data of most glasses investigated indicate Sn4+O6 units with average Sn-O distances near 2.03 Angstroms. XAS data for a float glass fabricated under reducing conditions show a mixture of Sn4+O6 and Sn2+O4 sites. XAS data for three glasses indicate Sn-Sn distances ranging from 3.43 to 3.53 Angstroms, that suggest Sn4+O6 units linking with each other, while the 4.96 Angstroms Sn-Sn distance for one waste glass suggests clustering of unlinkedmore » Sn4+O6 units.« less

The origin of consistent protein structure refinement from structural averaging.

PubMed

Park, Hahnbeom; DiMaio, Frank; Baker, David

2015-06-02

Recent studies have shown that explicit solvent molecular dynamics (MD) simulation followed by structural averaging can consistently improve protein structure models. We find that improvement upon averaging is not limited to explicit water MD simulation, as consistent improvements are also observed for more efficient implicit solvent MD or Monte Carlo minimization simulations. To determine the origin of these improvements, we examine the changes in model accuracy brought about by averaging at the individual residue level. We find that the improvement in model quality from averaging results from the superposition of two effects: a dampening of deviations from the correct structure in the least well modeled regions, and a reinforcement of consistent movements towards the correct structure in better modeled regions. These observations are consistent with an energy landscape model in which the magnitude of the energy gradient toward the native structure decreases with increasing distance from the native state. Copyright © 2015 Elsevier Ltd. All rights reserved.

Match-play activity profile in elite women's rugby union players.

PubMed

Suarez-Arrones, Luis; Portillo, Javier; Pareja-Blanco, Fernando; Sáez de Villareal, Eduardo; Sánchez-Medina, Luis; Munguía-Izquierdo, Diego

2014-02-01

The aim of this study was to provide an objective description of the locomotive activities and exercise intensity undergone during the course of an international-level match of female rugby union. Eight players were analyzed using global positioning system tracking technology. The total distance covered by the players during the whole match was 5,820 ± 512 m. The backs covered significantly more distance than the forwards (6,356 ± 144 vs. 5,498 ± 412 m, respectively). Over this distance, 42.7% (2,487 ± 391 m) was spent standing or walking, 35% jogging (2,037 ± 315 m), 9.7% running at low intensity (566 ± 115 m), 9.5% at medium intensity (553 ± 190 m), 1.8% at high intensity (105 ± 74 m), and 1.2% sprinting (73 ± 107 m). There were significant differences in the distance covered by forwards and backs in certain speed zones. Analysis of the relative distance traveled over successive 10-minute period of match play revealed that the greatest distances were covered during the first (725 ± 53 m) and the last (702 ± 79 m) 10-minute period of the match. The average number of sprints, the average maximum distance of sprinting, the average minimum distance of sprinting, and the average sprint distance during the game were 4.7 ± 3.9 sprints, 20.6 ± 10.5 m, 5.8 ± 0.9 -m, and 12.0 ± 3.8 m, respectively. There were substantial differences between forwards and backs. Backs covered greater total distance, distance in certain speed zones, and sprinting performance. The players spent 46.9 ± 28.9% of match time between 91 and 100% of maximum heart rate and experienced a large number of impacts (accelerometer data and expressed as g forces) during the game. These findings offer important information to design better training strategies and physical fitness testing adapted to the specific demands of female rugby union.

Neutron and X-ray total scattering study of hydrogen disorder in fully hydrated hydrogrossular, Ca3Al2(O4H4)3

NASA Astrophysics Data System (ADS)

Keen, David A.; Keeble, Dean S.; Bennett, Thomas D.

2018-04-01

The structure of fully hydrated grossular, or katoite, contains an unusual arrangement of four O-H bonds within each O4 tetrahedra. Neutron and X-ray total scattering from a powdered deuterated sample have been measured to investigate the local arrangement of this O4D4 cluster. The O-D bond length determined directly from the pair distribution function is 0.954 Å, although the Rietveld-refined distance between average O and D positions was slightly smaller. Reverse Monte Carlo refinement of supercell models to the total scattering data show that other than the consequences of this correctly determined O-D bond length, there is little to suggest that the O4D4 structure is locally significantly different from that expected based on the average structure determined solely from Bragg diffraction.

Dynamics of Polarons in Organic Conjugated Polymers with Side Radicals.

PubMed

Liu, J J; Wei, Z J; Zhang, Y L; Meng, Y; Di, B

2017-03-16

Based on the one-dimensional tight-binding Su-Schrieffer-Heeger (SSH) model, and using the molecular dynamics method, we discuss the dynamics of electron and hole polarons propagating along a polymer chain, as a function of the distance between side radicals and the magnitude of the transfer integrals between the main chain and the side radicals. We first discuss the average velocities of electron and hole polarons as a function of the distance between side radicals. It is found that the average velocities of the electron polarons remain almost unchanged, while the average velocities of hole polarons decrease significantly when the radical distance is comparable to the polaron width. Second, we have found that the average velocities of electron polarons decrease with increasing transfer integral, but the average velocities of hole polarons increase. These results may provide a theoretical basis for understanding carriers transport properties in polymers chain with side radicals.

Special electronic distance meter calibration for precise engineering surveying industrial applications

NASA Astrophysics Data System (ADS)

Braun, Jaroslav; Štroner, Martin; Urban, Rudolf

2015-05-01

All surveying instruments and their measurements suffer from some errors. To refine the measurement results, it is necessary to use procedures restricting influence of the instrument errors on the measured values or to implement numerical corrections. In precise engineering surveying industrial applications the accuracy of the distances usually realized on relatively short distance is a key parameter limiting the resulting accuracy of the determined values (coordinates, etc.). To determine the size of systematic and random errors of the measured distances were made test with the idea of the suppression of the random error by the averaging of the repeating measurement, and reducing systematic errors influence of by identifying their absolute size on the absolute baseline realized in geodetic laboratory at the Faculty of Civil Engineering CTU in Prague. The 16 concrete pillars with forced centerings were set up and the absolute distances between the points were determined with a standard deviation of 0.02 millimetre using a Leica Absolute Tracker AT401. For any distance measured by the calibrated instruments (up to the length of the testing baseline, i.e. 38.6 m) can now be determined the size of error correction of the distance meter in two ways: Firstly by the interpolation on the raw data, or secondly using correction function derived by previous FFT transformation usage. The quality of this calibration and correction procedure was tested on three instruments (Trimble S6 HP, Topcon GPT-7501, Trimble M3) experimentally using Leica Absolute Tracker AT401. By the correction procedure was the standard deviation of the measured distances reduced significantly to less than 0.6 mm. In case of Topcon GPT-7501 is the nominal standard deviation 2 mm, achieved (without corrections) 2.8 mm and after corrections 0.55 mm; in case of Trimble M3 is nominal standard deviation 3 mm, achieved (without corrections) 1.1 mm and after corrections 0.58 mm; and finally in case of Trimble S6 is nominal standard deviation 1 mm, achieved (without corrections) 1.2 mm and after corrections 0.51 mm. Proposed procedure of the calibration and correction is in our opinion very suitable for increasing of the accuracy of the electronic distance measurement and allows the use of the common surveying instrument to achieve uncommonly high precision.

Distribution of Mercury Concentrations in Tree Rings and Surface Soils Adjacent to a Phosphate Fertilizer Plant in Southern Korea.

PubMed

Jung, Raae; Ahn, Young Sang

2017-08-01

This study aimed to determine mercury concentrations in tree rings and surface soils at distances of 4, 26 and 40 km from a fertilizer plant located in Yeosu City, Korea. Mercury concentrations in all tree rings were low prior to the establishment of the plant in 1977 and became elevated thereafter. The highest average mercury concentration in the tree rings was 11.96 ng g -1 at the Yeosu site located nearest to the plant, with the lowest average mercury concentration of 4.45 ng g -1 at the Suncheon site furthest away from the plant. In addition, the highest mercury content in the surface soil was 108.51 ng cm -3 at the Yeosu site, whereas the lowest mercury content in the surface soil was 31.47 ng cm -3 at the Suncheon site. The mercury levels decreased gradually with increasing distance from the plant.

A comparison of sonography and radiography student scores in a cadaver anatomy class before and after the implementation of synchronous distance education.

PubMed

Bagley, Jennifer Elaine; Randall, K; Anderson, M P

2015-02-01

Distance education is a solution to expand medical imaging education to students who might not otherwise be able to obtain the education. It can be a mechanism to reduce the health care worker shortage in underserved areas. In some cases, distance education may be a disruptive technology, and might lower student performance. This study compares student scores in a cadaver anatomy course in the four cohorts preceding the implementation of distance education to the first three cohorts that took the course using a multiple campus design. The means and medians of the lecture exam average, the laboratory component score, and the final course score of the nondistance education cohorts were compared with those of the distance education cohorts using nonparametric statistical analysis. Scores in an anatomy course were compared by campus placement among the distance education cohorts, and the independent effect of distance education on the laboratory component, lecture examination average, and final course scores, while controlling for cumulative grade point average and site (originating/distant), was assessed. Students receiving the course in a nondistance education environment scored higher in the anatomy course than the students who took the course in a distance education environment. Students on the distant campus scored lower than students on the originating site. Distance education technology creates new opportunities for learning, but can be a disruptive technology. Programs seeking to implement distance education into their curriculum should do so with knowledge of the advantages and disadvantages.

Quantifying tap-to-household water quality deterioration in urban communities in Vellore, India: The impact of spatial assumptions.

PubMed

Alarcon Falconi, Tania M; Kulinkina, Alexandra V; Mohan, Venkata Raghava; Francis, Mark R; Kattula, Deepthi; Sarkar, Rajiv; Ward, Honorine; Kang, Gagandeep; Balraj, Vinohar; Naumova, Elena N

2017-01-01

Municipal water sources in India have been found to be highly contaminated, with further water quality deterioration occurring during household storage. Quantifying water quality deterioration requires knowledge about the exact source tap and length of water storage at the household, which is not usually known. This study presents a methodology to link source and household stored water, and explores the effects of spatial assumptions on the association between tap-to-household water quality deterioration and enteric infections in two semi-urban slums of Vellore, India. To determine a possible water source for each household sample, we paired household and tap samples collected on the same day using three spatial approaches implemented in GIS: minimum Euclidean distance; minimum network distance; and inverse network-distance weighted average. Logistic and Poisson regression models were used to determine associations between water quality deterioration and household-level characteristics, and between diarrheal cases and water quality deterioration. On average, 60% of households had higher fecal coliform concentrations in household samples than at source taps. Only the weighted average approach detected a higher risk of water quality deterioration for households that do not purify water and that have animals in the home (RR=1.50 [1.03, 2.18], p=0.033); and showed that households with water quality deterioration were more likely to report diarrheal cases (OR=3.08 [1.21, 8.18], p=0.02). Studies to assess contamination between source and household are rare due to methodological challenges and high costs associated with collecting paired samples. Our study demonstrated it is possible to derive useful spatial links between samples post hoc; and that the pairing approach affects the conclusions related to associations between enteric infections and water quality deterioration. Copyright © 2016 Elsevier GmbH. All rights reserved.

Wi-Fi real time location systems

NASA Astrophysics Data System (ADS)

Doll, Benjamin A.

This thesis objective was to determine the viability of utilizing an untrained Wi-Fi. real time location system as a GPS alternative for indoor environments. Background. research showed that GPS is rarely able to penetrate buildings to provide reliable. location data. The benefit of having location information in a facility and how they might. be used for disaster or emergency relief personnel and their resources motivated this. research. A building was selected with a well-deployed Wi-Fi infrastructure and its. untrained location feature was used to determine the distance between the specified. test points and the system identified location. It was found that the average distance. from the test point throughout the facility was 14.3 feet 80% of the time. This fell within. the defined viable range and supported that an untrained Wi-Fi RTLS system could be a. viable solution for GPS's lack of availability indoors.

Determination of broadband moment magnitude (Mwp) for August 11, 2009 Suruga-Bay earthquake (MJMA=6.5)

NASA Astrophysics Data System (ADS)

Tsuboi, S.; Hirshorn, B. F.

2009-12-01

We have determined Mwp for the August 11, 2009 Suruga-Bay earthquake (MJMA=6.5) using broadband seismograms recorded at close epicentral distance stations. We have used two broadband seismograph stations: JHJ2 (epicentral distance 1.9 degree) and FUJ (epicentral distance 0.44 degree). Because of the close epicentral distance of FUJ, the seismogram is clipped at about 10 second after the P-wave arrival. However, it was possible to use the first 10 second of this seismogram to compute Mwp. We get Mwp=6.4 for JHJ2 and 6.8 for FUJ(figure 1). After we apply Whitmore et al (2000)’s correction and average these two stations, we get Mwp=6.6 for this event. The epicentral distance of 0.44 degree for magnitude 6.5 earthquake is marginal to treat this seismogram as far-field. However, considering the aftershock distribution, the fault area seems to be limited to within the Suruga-Bay, which may confirm the fact that Mwp can be successfully computed at FUJ based on the far-field approximation. This result is significant in using Mwp from close epicentral distance seismograms to issue early tsunami warning. A large earthquake with Mw=7.5 (GCMT) occurred in Andaman Island, India, 10 minutes before this Suruga-Bay event. This made it very difficult to estimate Mwp for the Suruga-Bay event from broadband seismograms at teleseismic distances because of the large amplitude of Mw7.5 Andaman Island earthquake. In this case, it is therefore difficult to issue accurate tsunami warnings based on the teleseismic stations. We used broadband seismograms recorded by F-net operated by the National Research Institute for Earth Science and Disaster Prevention.

Prediction of maximum earthquake intensities for the San Francisco Bay region

USGS Publications Warehouse

Borcherdt, Roger D.; Gibbs, James F.

1975-01-01

The intensity data for the California earthquake of April 18, 1906, are strongly dependent on distance from the zone of surface faulting and the geological character of the ground. Considering only those sites (approximately one square city block in size) for which there is good evidence for the degree of ascribed intensity, the empirical relation derived between 1906 intensities and distance perpendicular to the fault for 917 sites underlain by rocks of the Franciscan Formation is: Intensity = 2.69 - 1.90 log (Distance) (km). For sites on other geologic units intensity increments, derived with respect to this empirical relation, correlate strongly with the Average Horizontal Spectral Amplifications (AHSA) determined from 99 three-component recordings of ground motion generated by nuclear explosions in Nevada. The resulting empirical relation is: Intensity Increment = 0.27 +2.70 log (AHSA), and average intensity increments for the various geologic units are -0.29 for granite, 0.19 for Franciscan Formation, 0.64 for the Great Valley Sequence, 0.82 for Santa Clara Formation, 1.34 for alluvium, 2.43 for bay mud. The maximum intensity map predicted from these empirical relations delineates areas in the San Francisco Bay region of potentially high intensity from future earthquakes on either the San Andreas fault or the Hazard fault.

Connecting the hadron mass scale to the fundamental mass scale of quantum chromodynamics

DOE PAGES

Deur, Alexandre; Brodsky, Stanley J.; de Teramond, Guy F.

2015-10-01

We establish an explicit connection between the long distance physics of confinement and the dynamical interactions of quarks and gluons at short distances and it has been a long-sought goal of quantum chromodynamics. Using holographic QCD, we derive a direct analytic relation between the scale κ which determines the masses of hadrons and the scale Λ s which controls the predictions of perturbative QCD at very short distances. The resulting prediction Λ s=0.341±0.032 GeV in the MS -scheme agrees well with the experimental average 0.339±0.016 GeV. We also derive a relation between Λs and the QCD string tension σ. Furthermore,more » this connection between the fundamental hadronic scale underlying the physics of quark confinement and the perturbative QCD scale controlling hard collisions can be carried out in any renormalization scheme.« less

Measurement of Initial Conditions at Nozzle Exit of High Speed Jets

NASA Technical Reports Server (NTRS)

Panda, J.; Zaman, K. B. M. Q.; Seasholtz, R. G.

2004-01-01

The time averaged and unsteady density fields close to the nozzle exit (0.1 less than or = x/D less than or = 2, x: downstream distance, D: jet diameter) of unheated free jets at Mach numbers of 0.95, 1.4, and 1.8 were measured using a molecular Rayleigh scattering based technique. The initial thickness of shear layer and its linear growth rate were determined from time-averaged density survey and a modeling process, which utilized the Crocco-Busemann equation to relate density profiles to velocity profiles. The model also corrected for the smearing effect caused by a relatively long probe length in the measured density data. The calculated shear layer thickness was further verified from a limited hot-wire measurement. Density fluctuations spectra, measured using a two-Photomultiplier-tube technique, were used to determine evolution of turbulent fluctuations in various Strouhal frequency bands. For this purpose spectra were obtained from a large number of points inside the flow; and at every axial station spectral data from all radial positions were integrated. The radially-integrated fluctuation data show an exponential growth with downstream distance and an eventual saturation in all Strouhal frequency bands. The initial level of density fluctuations was calculated by extrapolation to nozzle exit.

Why GPS makes distances bigger than they are

PubMed Central

Ranacher, Peter; Brunauer, Richard; Trutschnig, Wolfgang; Van der Spek, Stefan; Reich, Siegfried

2016-01-01

ABSTRACT Global navigation satellite systems such as the Global Positioning System (GPS) is one of the most important sensors for movement analysis. GPS is widely used to record the trajectories of vehicles, animals and human beings. However, all GPS movement data are affected by both measurement and interpolation errors. In this article we show that measurement error causes a systematic bias in distances recorded with a GPS; the distance between two points recorded with a GPS is – on average – bigger than the true distance between these points. This systematic ‘overestimation of distance’ becomes relevant if the influence of interpolation error can be neglected, which in practice is the case for movement sampled at high frequencies. We provide a mathematical explanation of this phenomenon and illustrate that it functionally depends on the autocorrelation of GPS measurement error (C). We argue that C can be interpreted as a quality measure for movement data recorded with a GPS. If there is a strong autocorrelation between any two consecutive position estimates, they have very similar error. This error cancels out when average speed, distance or direction is calculated along the trajectory. Based on our theoretical findings we introduce a novel approach to determine C in real-world GPS movement data sampled at high frequencies. We apply our approach to pedestrian trajectories and car trajectories. We found that the measurement error in the data was strongly spatially and temporally autocorrelated and give a quality estimate of the data. Most importantly, our findings are not limited to GPS alone. The systematic bias and its implications are bound to occur in any movement data collected with absolute positioning if interpolation error can be neglected. PMID:27019610

A comparison of sonography and radiography student scores in a cadaver anatomy class before and after the implementation of synchronous distance education

PubMed Central

Randall, K; Anderson, MP

2015-01-01

Distance education is a solution to expand medical imaging education to students who might not otherwise be able to obtain the education. It can be a mechanism to reduce the health care worker shortage in underserved areas. In some cases, distance education may be a disruptive technology, and might lower student performance. This study compares student scores in a cadaver anatomy course in the four cohorts preceding the implementation of distance education to the first three cohorts that took the course using a multiple campus design. The means and medians of the lecture exam average, the laboratory component score, and the final course score of the nondistance education cohorts were compared with those of the distance education cohorts using nonparametric statistical analysis. Scores in an anatomy course were compared by campus placement among the distance education cohorts, and the independent effect of distance education on the laboratory component, lecture examination average, and final course scores, while controlling for cumulative grade point average and site (originating/distant), was assessed. Students receiving the course in a nondistance education environment scored higher in the anatomy course than the students who took the course in a distance education environment. Students on the distant campus scored lower than students on the originating site. Distance education technology creates new opportunities for learning, but can be a disruptive technology. Programs seeking to implement distance education into their curriculum should do so with knowledge of the advantages and disadvantages. PMID:27433237

Odor modeling methodology for determining the odor buffer distance for sanitary landfills

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Dukman.

1991-01-01

The objective of this study is to create a methodology whereby reductions in off-site odor migrations resulting from operational and design changes in new or expanded sanitary landfills can be evaluated. The Ann Arbor Sanitary Landfill was chosen as a prototype landfill to test a hypothesis for this study. This study is a unique approach to odor prediction at sanitary landfills using surface flux measurements, odor threshold panel measurements, and dispersion modeling. Flux measurements were made at open tipping face, temporary cover, final cover, vents, and composting zones of the Ann Arbor Sanitary Landfill. Surface gas velocities and in-ground concentrationsmore » were determined to allow a quantification of the total and methane gas flow rate. Odor threshold panel measurements were performed to determine the odor intensity in odor units at the corresponding sites. The used the flux and odor panel measurements in the Industrial Source Complex Terrain Model to determine the hourly averaged highest and second highest odor levels at 175 receptors placed at the property boundary and 25 nearby residential locations. Using measured values for velocity, subsurface CH{sub 4} concentration and odor intensity, it was determined that the proposed 1990 operations with a buffer distance of 600 feet provided at least a factor of five protection below 1 o.u. of the odor threshold for all receptors, and dilution protection equal to the historic 1984 operations with a 1,200 feet isolation distance.« less

What Is the Optimal Minimum Penetration Depth for "All-Inside" Meniscal Repairs?

PubMed

McCulloch, Patrick C; Jones, Hugh L; Lue, Jeffrey; Parekh, Jesal N; Noble, Philip C

2016-08-01

To identify desired minimum depth setting for safe, effective placement of the all-inside meniscal suture anchors. Using 16 cadaveric knees and standard arthroscopic techniques, 3-dimensional surfaces of the meniscocapsular junction and posterior capsule were digitized. Using standard anteromedial and anterolateral portals, the distance from the meniscocapsular junction to the posterior capsule outer wall was measured for 3 locations along the posterior half of medial and lateral menisci. Multiple all-inside meniscal repairs were performed on 7 knees to determine an alternate measure of capsular thickness (X2) and compared with the digitized results. In the digitized group, the distance (X1) from the capsular junction to the posterior capsular wall was averaged in both menisci for 3 regions using anteromedial and anterolateral portals. Mean distances of 6.4 to 8.8 mm were found for the lateral meniscus and 6.5 to 9.1 mm for the medial meniscus. The actual penetration depth was determined in the repair group and labeled X2. It showed a similar pattern to the variation seen in X1 by region, although it exceeded predicted distances an average 1.7 mm in the medial and 1.5 mm in the lateral meniscus owing to visible deformation of the capsule as it pierced. Capsular thickness during arthroscopic repair measures approximately 6 to 9 mm (X1), with 1.5 to 2 mm additional depth needed to ensure penetration rather than bulging of the posterior capsule (X2), resulting in 8 to 10 mm minimum penetration depth range. Surgeons can add desired distance away from the meniscocapsular junction (L) at device implantation, finding optimal minimal setting for penetration depth (X2 + L), which for most repairable tears may be as short as 8 mm and not likely to be greater than 16 mm. Minimum depth setting for optimal placement of all-inside meniscal suture anchors when performing all-inside repair of the medial or lateral meniscus reduces risk of harming adjacent structures secondary to overpenetration and underpenetration of the posterior capsule. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Lessons from a geospatial analysis of depot medroxyprogesterone acetate sales by licensed chemical sellers in Ghana.

PubMed

Shelus, Victoria; Lebetkin, Elena; Keyes, Emily; Mensah, Stephen; Dzasi, Kafui

2015-08-01

To map access to depot medroxyprogesterone acetate (DMPA) from licensed chemical sellers (LCS); to estimate the proportion of women of reproductive age in areas with access; and to examine affordability and variability of costs. A geospatial analysis was conducted using data collected from 298 women who purchased DMPA from 49 geocoded LCS shops in the Amansie West and Ejisu-Juabeng districts of Ghana from June 4 to August 31, 2012. The women reported on cost and average distance traveled to purchase DMPA. In Amansie West, 21.1% of all women of reproductive age lived within average walking distance and 80.4% lived within average driving distance of an LCS. In Ejisu-Juabeng, 41.9% and 60.1% of women lived within average walking and driving distance, respectively. Distribution of affordability varied across each district. Access to LCS shops is high, and training LCS to administer DMPA would increase access to family planning in Ghana, with associated time and cost savings. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Center-to-Limb Variation of Deprojection Errors in SDO/HMI Vector Magnetograms

NASA Astrophysics Data System (ADS)

Falconer, David; Moore, Ronald; Barghouty, Nasser; Tiwari, Sanjiv K.; Khazanov, Igor

2015-04-01

For use in investigating the magnetic causes of coronal heating in active regions and for use in forecasting an active region’s productivity of major CME/flare eruptions, we have evaluated various sunspot-active-region magnetic measures (e.g., total magnetic flux, free-magnetic-energy proxies, magnetic twist measures) from HMI Active Region Patches (HARPs) after the HARP has been deprojected to disk center. From a few tens of thousand HARP vector magnetograms (of a few hundred sunspot active regions) that have been deprojected to disk center, we have determined that the errors in the whole-HARP magnetic measures from deprojection are negligibly small for HARPS deprojected from distances out to 45 heliocentric degrees. For some purposes the errors from deprojection are tolerable out to 60 degrees. We obtained this result by the following process. For each whole-HARP magnetic measure: 1) for each HARP disk passage, normalize the measured values by the measured value for that HARP at central meridian; 2) then for each 0.05 Rs annulus, average the values from all the HARPs in the annulus. This results in an average normalized value as a function of radius for each measure. Assuming no deprojection errors and that, among a large set of HARPs, the measure is as likely to decrease as to increase with HARP distance from disk center, the average of each annulus is expected to be unity, and, for a statistically large sample, the amount of deviation of the average from unity estimates the error from deprojection effects. The deprojection errors arise from 1) errors in the transverse field being deprojected into the vertical field for HARPs observed at large distances from disk center, 2) increasingly larger foreshortening at larger distances from disk center, and 3) possible errors in transverse-field-direction ambiguity resolution.From the compiled set of measured vales of whole-HARP magnetic nonpotentiality parameters measured from deprojected HARPs, we have examined the relation between each nonpotentiality parameter and the speed of CMEs from the measured active regions. For several different nonpotentiality parameters we find there is an upper limit to the CME speed, the limit increasing as the value of the parameter increases.

Estimating the population size and colony boundary of subterranean termites by using the density functions of directionally averaged capture probability.

PubMed

Su, Nan-Yao; Lee, Sang-Hee

2008-04-01

Marked termites were released in a linear-connected foraging arena, and the spatial heterogeneity of their capture probabilities was averaged for both directions at distance r from release point to obtain a symmetrical distribution, from which the density function of directionally averaged capture probability P(x) was derived. We hypothesized that as marked termites move into the population and given sufficient time, the directionally averaged capture probability may reach an equilibrium P(e) over the distance r and thus satisfy the equal mixing assumption of the mark-recapture protocol. The equilibrium capture probability P(e) was used to estimate the population size N. The hypothesis was tested in a 50-m extended foraging arena to simulate the distance factor of field colonies of subterranean termites. Over the 42-d test period, the density functions of directionally averaged capture probability P(x) exhibited four phases: exponential decline phase, linear decline phase, equilibrium phase, and postequilibrium phase. The equilibrium capture probability P(e), derived as the intercept of the linear regression during the equilibrium phase, correctly projected N estimates that were not significantly different from the known number of workers in the arena. Because the area beneath the probability density function is a constant (50% in this study), preequilibrium regression parameters and P(e) were used to estimate the population boundary distance 1, which is the distance between the release point and the boundary beyond which the population is absent.

Ureter tracking and segmentation in CT urography (CTU) using COMPASS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadjiiski, Lubomir, E-mail: lhadjisk@umich.edu; Zick, David; Chan, Heang-Ping

2014-12-15

Purpose: The authors are developing a computerized system for automated segmentation of ureters in CTU, referred to as combined model-guided path-finding analysis and segmentation system (COMPASS). Ureter segmentation is a critical component for computer-aided diagnosis of ureter cancer. Methods: COMPASS consists of three stages: (1) rule-based adaptive thresholding and region growing, (2) path-finding and propagation, and (3) edge profile extraction and feature analysis. With institutional review board approval, 79 CTU scans performed with intravenous (IV) contrast material enhancement were collected retrospectively from 79 patient files. One hundred twenty-four ureters were selected from the 79 CTU volumes. On average, the uretersmore » spanned 283 computed tomography slices (range: 116–399, median: 301). More than half of the ureters contained malignant or benign lesions and some had ureter wall thickening due to malignancy. A starting point for each of the 124 ureters was identified manually to initialize the tracking by COMPASS. In addition, the centerline of each ureter was manually marked and used as reference standard for evaluation of tracking performance. The performance of COMPASS was quantitatively assessed by estimating the percentage of the length that was successfully tracked and segmented for each ureter and by estimating the average distance and the average maximum distance between the computer and the manually tracked centerlines. Results: Of the 124 ureters, 120 (97%) were segmented completely (100%), 121 (98%) were segmented through at least 70%, and 123 (99%) were segmented through at least 50% of its length. In comparison, using our previous method, 85 (69%) ureters were segmented completely (100%), 100 (81%) were segmented through at least 70%, and 107 (86%) were segmented at least 50% of its length. With COMPASS, the average distance between the computer and the manually generated centerlines is 0.54 mm, and the average maximum distance is 2.02 mm. With our previous method, the average distance between the centerlines was 0.80 mm, and the average maximum distance was 3.38 mm. The improvements in the ureteral tracking length and both distance measures were statistically significant (p < 0.0001). Conclusions: COMPASS improved significantly the ureter tracking, including regions across ureter lesions, wall thickening, and the narrowing of the lumen.« less

A comparison of the relative biological effectiveness of low energy electronic brachytherapy sources in breast tissue: a Monte Carlo study.

PubMed

White, Shane A; Reniers, Brigitte; de Jong, Evelyn E C; Rusch, Thomas; Verhaegen, Frank

2016-01-07

Electronic brachytherapy sources use low energy photons to treat the tumor bed during or after breast-conserving surgery. The relative biological effectiveness of two electronic brachytherapy sources was explored to determine if spectral differences due to source design influenced radiation quality and if radiation quality decreased with distance in the breast. The RBE was calculated through the number of DNA double strand breaks (RBEDSB) using the Monte Carlo damage simulator (MCDS) in combination with other Monte Carlo electron/photon spectrum calculations. 50kVp photons from the Intrabeam (Carl Zeiss Surgical) and Axxent (Xoft) through 40-mm spherical applicators were simulated to account for applicator and tissue attenuation in a variety of breast tissue compositions. 40kVp Axxent photons were also simulated. Secondary electrons (known to be responsible for most DNA damage) spectra at different distance were inputted into MCDS to calculate the RBEDSB. All RBEDSB used a cobalt-60 reference. RBEDSB data was combined with corresponding average photon spectrum energy for the Axxent and applied to model-based average photon energy distributions to produce an RBEDSB map of an accelerated partial breast irradiation (APBI) patient. Both Axxent and Intrabeam 50kVp spectra were shown to have a comparable RBEDSB of between 1.4 and 1.6 at all distances in spite of progressive beam hardening. The Axxent 40kVp also demonstrated a similar RBEDSB at distances. Most RBEDSB variability was dependent on the tissue type as was seen in rib (RBEDSB  ≈  1.4), gland (≈1.55), adipose (≈1.59), skin (≈1.52) and lung (≈1.50). RBEDSB variability between both sources was within 2%. A correlation was shown between RBEDSB and average photon energy and used to produce an RBEDSB map of a dose distribution in an APBI patient dataset. Radiation quality is very similar between electronic brachytherapy sources studied. No significant reductions in RBEDSB were observed with increasing distance from the source.

Reinventing the wheel: comparison of two wheel cage styles for assessing mouse voluntary running activity.

PubMed

Seward, T; Harfmann, B D; Esser, K A; Schroder, E A

2018-04-01

Voluntary wheel cage assessment of mouse activity is commonly employed in exercise and behavioral research. Currently, no standardization for wheel cages exists resulting in an inability to compare results among data from different laboratories. The purpose of this study was to determine whether the distance run or average speed data differ depending on the use of two commonly used commercially available wheel cage systems. Two different wheel cages with structurally similar but functionally different wheels (electromechanical switch vs. magnetic switch) were compared side-by-side to measure wheel running data differences. Other variables, including enrichment and cage location, were also tested to assess potential impacts on the running wheel data. We found that cages with the electromechanical switch had greater inherent wheel resistance and consistently led to greater running distance per day and higher average running speed. Mice rapidly, within 1-2 days, adapted their running behavior to the type of experimental switch used, suggesting these running differences are more behavioral than due to intrinsic musculoskeletal, cardiovascular, or metabolic limits. The presence of enrichment or location of the cage had no detectable impact on voluntary wheel running. These results demonstrate that mice run differing amounts depending on the type of cage and switch mechanism used and thus investigators need to report wheel cage type/wheel resistance and use caution when interpreting distance/speed run across studies. NEW & NOTEWORTHY The results of this study highlight that mice will run different distances per day and average speed based on the inherent resistance present in the switch mechanism used to record data. Rapid changes in running behavior for the same mouse in the different cages demonstrate that a strong behavioral factor contributes to classic exercise outcomes in mice. Caution needs to be taken when interpreting mouse voluntary wheel running activity to include potential behavioral input and physiological parameters.

Age-dependence of the average and equivalent refractive indices of the crystalline lens

PubMed Central

Charman, W. Neil; Atchison, David A.

2013-01-01

Lens average and equivalent refractive indices are required for purposes such as lens thickness estimation and optical modeling. We modeled the refractive index gradient as a power function of the normalized distance from lens center. Average index along the lens axis was estimated by integration. Equivalent index was estimated by raytracing through a model eye to establish ocular refraction, and then backward raytracing to determine the constant refractive index yielding the same refraction. Assuming center and edge indices remained constant with age, at 1.415 and 1.37 respectively, average axial refractive index increased (1.408 to 1.411) and equivalent index decreased (1.425 to 1.420) with age increase from 20 to 70 years. These values agree well with experimental estimates based on different techniques, although the latter show considerable scatter. The simple model of index gradient gives reasonable estimates of average and equivalent lens indices, although refinements in modeling and measurements are required. PMID:24466474

Study of Anthropometric Measurements of the Anterior Ethmoidal Artery using Three-dimensional Scanning on 300 Patients

PubMed Central

Bortoli, Vinicius Tomadon; Martins, Rafael Ferri; Negri, Krystal Calmeto

2017-01-01

Introduction The anterior ethmoidal artery (AEA) is one of the main arteries that supply both the nasal mucosa and the ethmoid sinuses. The AEA shows variability regarding its distance from adjacent structures. Several studies have developed techniques to identify the AEA. Objective This study aimed to compare the measurements from the AEA to the ethmoid bulla and to the frontal beak by using computed tomography of the face, while identifying their intraindividual and interindividual variations. Methods We analyzed 300 CT scans of the face performed at the CT scan Center at Hospital. The average age of subjects was 36 ± 15.1 years (range 4–84). Results We found that the average distance from the AEA to the ethmoid bulla was 17.2 ± 1.8 mm and the distance from the AEA to the frontal beak was 15.1 ± 2.2 mm. Regarding the average distance from the AEA to the frontal beak (AEA-frontal beak), there was a difference between the right and left sides, with the former being 0.4 mm higher on average than the latter. Among the age groups, there was a significant difference of distances between the AEA and the ethmoid bulla (AEA-ethmoid bulla), which were shorter in the ≤ 12 years group. There was a positive and significant correlation between both measurements analyzed, with low values (high) of AEA-ethmoid bulla distance corresponding to low values (high) of AEA-frontal beak distance. Conclusion The measurements obtained adds anatomical knowledge that can serve as a parameter in frontal and ethmoid sinus surgery. PMID:28382116

MALT90 Kinematic Distances to Dense Molecular Clumps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitaker, J. Scott; Jackson, James M.; Sanhueza, Patricio

Using molecular-line data from the Millimetre Astronomy Legacy Team 90 GHz Survey (MALT90), we have estimated kinematic distances to 1905 molecular clumps identified in the ATLASGAL 870 μ m continuum survey over the longitude range 295° <  l  < 350°. The clump velocities were determined using a flux-weighted average of the velocities obtained from Gaussian fits to the HCO{sup +}, HNC, and N{sub 2}H{sup +} (1–0) transitions. The near/far kinematic distance ambiguity was addressed by searching for the presence or absence of absorption or self-absorption features in 21 cm atomic hydrogen spectra from the Southern Galactic Plane Survey. Our algorithm provides anmore » estimation of the reliability of the ambiguity resolution. The Galactic distribution of the clumps indicates positions where the clumps are bunched together, and these locations probably trace the locations of spiral arms. Several clumps fall at the predicted location of the far side of the Scutum–Centaurus arm. Moreover, a number of clumps with positive radial velocities are unambiguously located on the far side of the Milky Way at galactocentric radii beyond the solar circle. The measurement of these kinematic distances, in combination with continuum or molecular-line data, now enables the determination of fundamental parameters such as mass, size, and luminosity for each clump.« less

Evaluation of pollen dispersal and cross pollination using transgenic grapevine plants.

PubMed

Harst, Margit; Cobanov, Beatrix-Axinja; Hausmann, Ludger; Eibach, Rudolf; Töpfer, Reinhard

2009-01-01

Public debate about the possible risk of genetically modified plants often concerns putative effects of pollen dispersal and out-crossing into conventional fields in the neighborhood of transgenic plants. Though Vitis vinifera (grapevine) is generally considered to be self-pollinating, it cannot be excluded that vertical gene transfer might occur. For monitoring pollen flow and out-crossing events, transgenic plants of Vitis vinifera cv. 'Dornfelder' harboring the gus-int gene were planted in the center of a field experiment in Southwest Germany in 1999. The rate of pollen dispersal was determined by pollen traps placed at radial distances of 5-150 m from the pollen-donor plants, at 1.00 and 1.80 m above ground. Transgenic pollen was evaluated by GUS staining, and could clearly be distinguished from pollen originating from non-transgenic grapevine plants. Transgenic pollen was observed up to 150 m from the pollen donors. The rate of out-crossing was determined by sampling seeds of selected grapevines at a distance of 10 m to the pollen source, and of a sector at 20 m distance, respectively, followed by GUS analysis of seedlings. The average cross-pollination rate during the experiment (2002-2004) was 2.7% at a distance of 20 m. The results of this first pilot study present a good base for further assessment under the conditions of normal viticulture practice.

The local environment of Cu+ in Cu-Y zeolite and its relationship to the synthesis of dimethyl carbonate.

PubMed

Drake, Ian J; Zhang, Yihua; Briggs, Daniel; Lim, Bomyi; Chau, Tanguy; Bell, Alexis T

2006-06-22

Cu-exchanged Y zeolite was investigated in order to determine the location of the copper cations relative to the zeolite framework and to determine which Cu cations are active for the oxidative carbonylation of methanol to dimethyl carbonate (DMC). Cu-Y zeolite was prepared by vapor-phase exchange of H-Y with CuCl. The oxidation state, local coordination, and bond distances of Al and Cu were determined using Al K-edge and Cu K-edge X-ray absorption spectroscopy (XAS). Complimentary information was obtained by H2 temperature-programmed reduction and by in-situ infrared spectroscopy. Cu-Y has a Cu/Al ratio of unity and very little occluded CuCl. The average Al-O and Al-Cu bond distances are 1.67 angstroms and 2.79 angstroms, respectively, and the average Cu-O and Cu-Si(Al) bond distances are 1.99 angstroms and 3.13 angstroms, respectively. All of the Cu exchanged is present as Cu+ in sites I', II, and III'. Cu-Y is active for the oxidative carbonylation of methanol, and at low reactant contact time produces DMC as the primary product. With increasing reactant contact time, DMC formation decreases in preference to the formation of dimethoxy methane (DMM) and methylformate (MF). The formation of DMM and MF is attributed to the hydrogenation of DMC and the hydrogenolysis of DMM, respectively. Observation of the catalyst under reaction conditions reveals that most of the copper cations remain as Cu+, but some oxidation of Cu+ to Cu2+ does occur. It is also concluded that only those copper cations present in site II and III' positions are accessible to the reactants, and hence are catalytically active. The dominant adsorbed species on the surface are methoxy groups, and adsorbed CO is present as a minority species. The relationship of these observations to the kinetics of DMC synthesis is discussed.

Preliminary assessment of the variability of UK offshore wind speed as a function of distance to the coast

NASA Astrophysics Data System (ADS)

Soler-Bientz, Rolando; Watson, Simon

2016-09-01

In the UK, there is an interest in the expected offshore wind resource given ambitious national plans to expand offshore capacity. There is also an increasing interest in alternative datasets to evaluate wind seasonal and inter-annual cycles which can be very useful in the initial stages of the design of wind farms in order to identify prospective areas where local measurements can then be applied to determine small-scale variations in the marine wind climate. In this paper we analyse both MERRA2 reanalysis data and measured offshore mast data to determine patterns in wind speed variation and how they change as a function of the distance from the coast. We also identify an empirical expression to estimate wind speed based on the distance from the coast. From the analysis, it was found that the variations of the seasonal cycles seem to be almost independent of the distance to the nearest shore and that they are an order of magnitude larger than the variations of the diurnal cycles. It was concluded that the diurnal variations decreased to less than a half for places located more than 100km from the nearest shore and that the data from the MERRA2 reanalysis grid points give an under-prediction of the average values of wind speed for both the diurnal and seasonal cycles. Finally, even though the two offshore masts were almost the same nearest distance from the coast and were geographically relatively close, they exhibited significantly different behaviour in terms of the strength of their diurnal and seasonal cycles which may be due to the distance from the coast for the prevailing wind direction being quite different for the two sites.

Comparing maternal styles in bonobos (Pan paniscus) and chimpanzees (Pan troglodytes).

PubMed

De Lathouwers, Mieke; Van Elsacker, Linda

2004-12-01

Studies on Cercopithecine primate maternal styles, using factor analysis on a set of maternal behaviors, commonly render two factors that describe separate dimensions of maternal behavior: protectiveness and rejection. The aims of this study were to 1) investigate whether this method for determining maternal styles in Cercopithecine species can be applied to bonobos (Pan paniscus) and chimpanzees (Pan troglodytes), 2) determine whether they follow the same pattern, and 3) assess whether species differences in maternal style are apparent. We performed a factor analysis on nine maternal behaviors using data on eight mother-infant pairs of each species. This resulted in three factors: protectiveness, distance, and refusal. Protectiveness is positively correlated with time spent in ventral contact, making contact, approaching, and restraining. Distance is positively related with breaking contact and leaving. Refusal is positively correlated with rejecting and nipple-rejecting. The pattern of protectiveness corresponds with the pattern found in Cercopithecine species, suggesting a high consistency of this dimension across species and higher taxa. The retention of the other two factors indicates that in the Pan species, breaking contact and leaving represent another dimension, apart from rejecting and nipple-rejecting, which usually fall under one dimension in Cercopithecine species. An interspecific comparison of the factor scores for each dimension of maternal behavior reveals that, on average, bonobos and chimpanzees score equally on protectiveness. Scores on distance increase positively with infant age in chimpanzees, and negatively in bonobos, and on average bonobos have higher scores on refusal. These interspecies differences in maternal style are discussed in the light of interspecies differences in infant development, infant vulnerability to aggression, interbirth intervals, and female sociality. Copyright 2004 Wiley-Liss, Inc.

Reliability and Construct Validity of the 6-Minute Racerunner Test in Children and Youth with Cerebral Palsy, GMFCS Levels III and IV.

PubMed

Bolster, Eline A M; Dallmeijer, Annet J; de Wolf, G Sander; Versteegt, Marieke; Schie, Petra E M van

2017-05-01

To determine the test-retest reliability and construct validity of a novel 6-Minute Racerunner Test (6MRT) in children and youth with cerebral palsy (CP) classified as Gross Motor Function Classification System (GMFCS) levels III and IV. The racerunner is a step-propelled tricycle. The participants were 38 children and youth with CP (mean age 11 y 2 m, SD 3 y 7 m; GMFCS III, n = 19; IV, n = 19). Racerunner capability was determined as the distance covered during the 6MRT on three occasions. The intraclass correlation coefficient (ICC), standard error of measurement (SEM), and smallest detectable differences (SDD) were calculated to assess test-retest reliability. The ICC for tests 2 and 3 were 0.89 (SDD 37%; 147 m) for children in level III and 0.91 for children in level IV (SDD 52%; 118 m). When the average of two separate test occasions was used, the SDDs were reduced to 26% (104 m; level III) and 37% (118 m; level IV). For tests 1 to 3, the mean distance covered increased from 345 m (SD 148 m) to 413 m (SD 137 m) for children in level III, and from 193 m (SD 100 m) to 239 m (SD 148 m) for children in level IV. Results suggest high test-retest reliability. However, large SDDs indicate that a single 6MRT measurement is only useful for individual evaluation when large improvements are expected, or when taking the average of two tests. The 6MRT discriminated the distance covered between children and youth in levels III and IV, supporting construct validity.

Resolving the Discrepancy of Distance to M60, a Giant Elliptical Galaxy in Virgo

NASA Astrophysics Data System (ADS)

Lee, Myung Gyoon; Jang, In Sung

2017-05-01

There is a well-known discrepancy in the distance estimation of M60, a giant elliptical galaxy in Virgo; the planetary nebula luminosity function (PNLF) distance moduli for this galaxy are, on average, 0.4 mag smaller than the values based on the surface brightness fluctuation (SBF) in the literature. We present photometry of the resolved stars in an outer field of M60 based on deep F775W and F850LP images in the Hubble Space Telescope obtained as part of the Pure Parallel Program in the archive. Detected stars are mostly old red giants in the halo of M60. With this photometry, we determine a distance to M60 using the tip of the red giant branch (TRGB). A TRGB is detected at F850LP{}{TRGB}=26.70+/- 0.06 mag, in the luminosity function of the red giants. This value corresponds to F814W{}0,{TRGB}=27.13+/- 0.06 mag and {{QT}}{TRGB}=27.04+/- 0.07 mag, where QT is a color-corrected F814W magnitude. From this we derive a distance modulus, {(m-M)}0=31.05+/- 0.07({ran}) +/- 0.06({sys}) (d=16.23+/- 0.50({ran})+/- 0.42({sys}) Mpc). This value is 0.3 mag larger than the PNLF distances and 0.1 mag smaller than the SBF distances in the previous studies, which indicates that the PNLF distances to M60 reported in the literature have larger uncertainties than the suggested values.

Separating the air quality impact of a major highway and nearby sources by nonparametric trajectory analysis.

PubMed

Henry, Ronald C; Vette, Alan; Norris, Gary; Vedantham, Ram; Kimbrough, Sue; Shores, Richard C

2011-12-15

Nonparametric Trajectory Analysis (NTA), a receptor-oriented model, was used to assess the impact of local sources of air pollution at monitoring sites located adjacent to highway I-15 in Las Vegas, NV. Measurements of black carbon, carbon monoxide, nitrogen oxides, and sulfur dioxide concentrations were collected from December 2008 to December 2009. The purpose of the study was to determine the impact of the highway at three downwind monitoring stations using an upwind station to measure background concentrations. NTA was used to precisely determine the contribution of the highway to the average concentrations measured at the monitoring stations accounting for the spatially heterogeneous contributions of other local urban sources. NTA uses short time average concentrations, 5 min in this case, and constructed local back-trajectories from similarly short time average wind speed and direction to locate and quantify contributions from local source regions. Averaged over an entire year, the decrease of concentrations with distance from the highway was found to be consistent with previous studies. For this study, the NTA model is shown to be a reliable approach to quantify the impact of the highway on local air quality in an urban area with other local sources.

Physics-based method to validate and repair flaws in protein structures

PubMed Central

Martin, Osvaldo A.; Arnautova, Yelena A.; Icazatti, Alejandro A.; Scheraga, Harold A.; Vila, Jorge A.

2013-01-01

A method that makes use of information provided by the combination of 13Cα and 13Cβ chemical shifts, computed at the density functional level of theory, enables one to (i) validate, at the residue level, conformations of proteins and detect backbone or side-chain flaws by taking into account an ensemble average of chemical shifts over all of the conformations used to represent a protein, with a sensitivity of ∼90%; and (ii) provide a set of (χ1/χ2) torsional angles that leads to optimal agreement between the observed and computed 13Cα and 13Cβ chemical shifts. The method has been incorporated into the CheShift-2 protein validation Web server. To test the reliability of the provided set of (χ1/χ2) torsional angles, the side chains of all reported conformations of five NMR-determined protein models were refined by a simple routine, without using NOE-based distance restraints. The refinement of each of these five proteins leads to optimal agreement between the observed and computed 13Cα and 13Cβ chemical shifts for ∼94% of the flaws, on average, without introducing a significantly large number of violations of the NOE-based distance restraints for a distance range ≤ 0.5 Ǻ, in which the largest number of distance violations occurs. The results of this work suggest that use of the provided set of (χ1/χ2) torsional angles together with other observables, such as NOEs, should lead to a fast and accurate refinement of the side-chain conformations of protein models. PMID:24082119

Physics-based method to validate and repair flaws in protein structures.

PubMed

Martin, Osvaldo A; Arnautova, Yelena A; Icazatti, Alejandro A; Scheraga, Harold A; Vila, Jorge A

2013-10-15

A method that makes use of information provided by the combination of (13)C(α) and (13)C(β) chemical shifts, computed at the density functional level of theory, enables one to (i) validate, at the residue level, conformations of proteins and detect backbone or side-chain flaws by taking into account an ensemble average of chemical shifts over all of the conformations used to represent a protein, with a sensitivity of ∼90%; and (ii) provide a set of (χ1/χ2) torsional angles that leads to optimal agreement between the observed and computed (13)C(α) and (13)C(β) chemical shifts. The method has been incorporated into the CheShift-2 protein validation Web server. To test the reliability of the provided set of (χ1/χ2) torsional angles, the side chains of all reported conformations of five NMR-determined protein models were refined by a simple routine, without using NOE-based distance restraints. The refinement of each of these five proteins leads to optimal agreement between the observed and computed (13)C(α) and (13)C(β) chemical shifts for ∼94% of the flaws, on average, without introducing a significantly large number of violations of the NOE-based distance restraints for a distance range ≤ 0.5 , in which the largest number of distance violations occurs. The results of this work suggest that use of the provided set of (χ1/χ2) torsional angles together with other observables, such as NOEs, should lead to a fast and accurate refinement of the side-chain conformations of protein models.

Attacking 22 entries in rugby union: running demands and differences between successful and unsuccessful entries.

PubMed

Tierney, P; Tobin, D P; Blake, C; Delahunt, E

2017-12-01

Global Positioning System (GPS) technology is commonly utilized in team sports, including rugby union. It has been used to describe the average running demands of rugby union. This has afforded an enhanced understanding of the physical fitness requirements for players. However, research in team sports has suggested that training players relative to average demands may underprepare them for certain scenarios within the game. To date, no research has investigated the running demands of attacking 22 entries in rugby union. Additionally, no research has been undertaken to determine whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries in rugby union. The first aim of this study was to describe the running intensity of attacking 22 entries. The second aim of this study was to investigate whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries. Running intensity was measured using meters per minute (m min -1 ) for (a) total distance, (b) running distance, (c) high-speed running distance, and (d) very high-speed running distance. This study provides normative data for the running intensity of attacking 22 entries in rugby union. Forwards achieved greater high-speed running intensity in successful (3.6 m min -1 ) compared to unsuccessful (1.8 m min -1 ) attacking 22 entries. Forwards should try and achieve greater high-speed running intensity in attacking 22 entries to increase the likelihood of successful outcomes during this period of gameplay. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Relationship of the actual thick intraocular lens optic to the thin lens equivalent.

PubMed

Holladay, J T; Maverick, K J

1998-09-01

To theoretically derive and empirically validate the relationship between the actual thick intraocular lens and the thin lens equivalent. Included in the study were 12 consecutive adult patients ranging in age from 54 to 84 years (mean +/- SD, 73.5 +/- 9.4 years) with best-corrected visual acuity better than 20/40 in each eye. Each patient had bilateral intraocular lens implants of the same style, placed in the same location (bag or sulcus) by the same surgeon. Preoperatively, axial length, keratometry, refraction, and vertex distance were measured. Postoperatively, keratometry, refraction, vertex distance, and the distance from the vertex of the cornea to the anterior vertex of the intraocular lens (AV(PC1)) were measured. Alternatively, the distance (AV(PC1)) was then back-calculated from the vergence formula used for intraocular lens power calculations. The average (+/-SD) of the absolute difference in the two methods was 0.23 +/- 0.18 mm, which would translate to approximately 0.46 diopters. There was no statistical difference between the measured and calculated values; the Pearson product-moment correlation coefficient from linear regression was 0.85 (r2 = .72, F = 56). The average intereye difference was -0.030 mm (SD, 0.141 mm; SEM, 0.043 mm) using the measurement method and +0.124 mm (SD, 0.412 mm; SEM, 0.124 mm) using the calculation method. The relationship between the actual thick intraocular lens and the thin lens equivalent has been determined theoretically and demonstrated empirically. This validation provides the manufacturer and surgeon additional confidence and utility for lens constants used in intraocular lens power calculations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

E.N. Stepanov; I.I. Mel'nikov; V.P. Gridasov

In active production at OAO Magnitogorskii Metallurgicheskii Kombinat (MMK), samples of melt materials were taken during shutdown and during planned repairs at furnaces 1 and 8. In particular, coke was taken from the tuyere zone at different distances from the tuyere tip. The mass of the point samples was 2-15 kg, depending on the sampling zone. The material extracted from each zone underwent magnetic separation and screening by size class. The resulting coke sample was averaged out and divided into parts: one for determining the granulometric composition and mechanical strength; and the other for technical analysis and determination of themore » physicochemical properties of the coke.« less

Do minority and poor neighborhoods have higher access to fast-food restaurants in the United States?

PubMed Central

James, Peter; Arcaya, Mariana C.; Parker, Devin M.; Tucker-Seeley, Reginald

2016-01-01

Background Disproportionate access to unhealthy foods in poor or minority neighborhoods may be a primary determinant of obesity disparities. We investigated whether fast-food access varies by Census block group (CBG) percent black and poverty. Methods We measured the average driving distance from each CBG population-weighted centroid to the five closest top ten fast-food chains and CBG percent black and percent below poverty Results Among 209,091 CBGs analyzed (95.1% of all US CBGs), CBG percent black was positively associated with fast-food access controlling for population density and percent poverty (average distance to fast food was 3.56 miles closer (95% CI: -3.64, -3.48) in CBGs with the highest versus lowest quartile of percentage of black residents). Poverty was not independently associated with fast-food access. The relationship between fast-food access and race was stronger in CBGs with higher levels of poverty (p for interaction <0.0001). Conclusions Predominantly black neighborhoods had higher access to fast-food while poverty was not an independent predictor of fast-food access. PMID:24945103

Prediction of acoustic feature parameters using myoelectric signals.

PubMed

Lee, Ki-Seung

2010-07-01

It is well-known that a clear relationship exists between human voices and myoelectric signals (MESs) from the area of the speaker's mouth. In this study, we utilized this information to implement a speech synthesis scheme in which MES alone was used to predict the parameters characterizing the vocal-tract transfer function of specific speech signals. Several feature parameters derived from MES were investigated to find the optimal feature for maximization of the mutual information between the acoustic and the MES features. After the optimal feature was determined, an estimation rule for the acoustic parameters was proposed, based on a minimum mean square error (MMSE) criterion. In a preliminary study, 60 isolated words were used for both objective and subjective evaluations. The results showed that the average Euclidean distance between the original and predicted acoustic parameters was reduced by about 30% compared with the average Euclidean distance of the original parameters. The intelligibility of the synthesized speech signals using the predicted features was also evaluated. A word-level identification ratio of 65.5% and a syllable-level identification ratio of 73% were obtained through a listening test.

Do minority and poor neighborhoods have higher access to fast-food restaurants in the United States?

PubMed

James, Peter; Arcaya, Mariana C; Parker, Devin M; Tucker-Seeley, Reginald D; Subramanian, S V

2014-09-01

Disproportionate access to unhealthy foods in poor or minority neighborhoods may be a primary determinant of obesity disparities. We investigated whether fast-food access varies by Census block group (CBG) percent black and poverty. We measured the average driving distance from each CBG population-weighted centroid to the five closest top ten fast-food chains and CBG percent black and percent below poverty. Among 209,091 CBGs analyzed (95.1% of all US CBGs), CBG percent black was positively associated with fast-food access controlling for population density and percent poverty (average distance to fast-food was 3.56 miles closer (95% CI: -3.64, -3.48) in CBGs with the highest versus lowest quartile of percentage of black residents). Poverty was not independently associated with fast-food access. The relationship between fast-food access and race was stronger in CBGs with higher levels of poverty (p for interaction <0.0001). Predominantly black neighborhoods had higher access to fast-food while poverty was not an independent predictor of fast-food access. Copyright © 2014 Elsevier Ltd. All rights reserved.

The influence of meteorological variables on CO2 and CH4 trends recorded at a semi-natural station.

PubMed

Pérez, Isidro A; Sánchez, M Luisa; García, M Ángeles; Pardo, Nuria; Fernández-Duque, Beatriz

2018-03-01

CO 2 and CH 4 evolution is usually linked with sources, sinks and their changes. However, this study highlights the role of meteorological variables. It aims to quantify their contribution to the trend of these greenhouse gases and to determine which contribute most. Six years of measurements at a semi-natural site in northern Spain were considered. Three sections are established: the first focuses on monthly deciles, the second explores the relationship between pairs of meteorological variables, and the third investigates the relationship between meteorological variables and changes in CO 2 and CH 4 . In the first section, monthly outliers were more marked for CO 2 than for CH 4 . The evolution of monthly deciles was fitted to three simple expressions, linear, quadratic and exponential. The linear and exponential are similar, whereas the quadratic evolution is the most flexible since it provided a variable rate of concentration change and a better fit. With this last evolution, a decrease in the change rate was observed for low CO 2 deciles, whereas an increasing change rate prevailed for the rest and was more accentuated for CH 4 . In the second section, meteorological variables were provided by a trajectory model. Backward trajectories from 1-day prior to reaching the measurement site were used to calculate distance and direction averages as well as the recirculation factor. Terciles of these variables were determined in order to establish three intervals with low, medium and high values. These intervals were used to classify the variables following their interval widths and skewnesses. The best correlation between pairs of meteorological variables was observed for the average distance, in particular with horizontal wind speed. Sinusoidal relationships with the average direction were obtained for average distance and for vertical wind speed. Finally, in the third section, the quadratic evolution was considered in each interval of all the meteorological variables. As regards the main result, the greatest increases were obtained for high potential temperature for both gases followed by low and medium boundary layer height for CO 2 and CH 4 , respectively. Combining both meteorological variables provided increases of 22 ± 9 and 0.070 ± 0.019 ppm for CO 2 and CH 4 , respectively, although the number of observations affected is small, around 7%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluating near highway air pollutant levels and estimating emission factors: Case study of Tehran, Iran.

PubMed

Nayeb Yazdi, Mohammad; Delavarrafiee, Maryam; Arhami, Mohammad

2015-12-15

A field sampling campaign was implemented to evaluate the variation in air pollutants levels near a highway in Tehran, Iran (Hemmat highway). The field measurements were used to estimate road link-based emission factors for average vehicle fleet. These factors were compared with results of an in tunnel measurement campaign (in Resalat tunnel). Roadside and in-tunnel measurements of carbon monoxide (CO) and size-fractionated particulate matter (PM) were conducted during the field campaign. The concentration gradient diagrams showed exponential decay, which represented a substantial decay, more than 50-80%, in air pollutants level in a distance between 100 and 150meters (m) of the highway. The changes in particle size distribution by distancing from highway were also captured and evaluated. The results showed particle size distribution shifted to larger size particles by distancing from highway. The empirical emission factors were obtained by using the roadside and in tunnel measurements with a hypothetical box model, floating machine model, CALINE4, CT-EMFAC or COPERT. Average CO emission factors were estimated to be in a range of 4 to 12g/km, and those of PM10 were 0.1 to 0.2g/km, depending on traffic conditions. Variations of these emission factors under real working condition with speeds were determined. Copyright © 2015 Elsevier B.V. All rights reserved.

Voter dynamics on an adaptive network with finite average connectivity

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Abhishek; Schmittmann, Beate

2009-03-01

We study a simple model for voter dynamics in a two-party system. The opinion formation process is implemented in a random network of agents in which interactions are not restricted by geographical distance. In addition, we incorporate the rapidly changing nature of the interpersonal relations in the model. At each time step, agents can update their relationships, so that there is no history dependence in the model. This update is determined by their own opinion, and by their preference to make connections with individuals sharing the same opinion and with opponents. Using simulations and analytic arguments, we determine the final steady states and the relaxation into these states for different system sizes. In contrast to earlier studies, the average connectivity (``degree'') of each agent is constant here, independent of the system size. This has significant consequences for the long-time behavior of the model.

Estimating cetacean carrying capacity based on spacing behaviour.

PubMed

Braithwaite, Janelle E; Meeuwig, Jessica J; Jenner, K Curt S

2012-01-01

Conservation of large ocean wildlife requires an understanding of how they use space. In Western Australia, the humpback whale (Megaptera novaeangliae) population is growing at a minimum rate of 10% per year. An important consideration for conservation based management in space-limited environments, such as coastal resting areas, is the potential expansion in area use by humpback whales if the carrying capacity of existing areas is exceeded. Here we determined the theoretical carrying capacity of a known humpback resting area based on the spacing behaviour of pods, where a resting area is defined as a sheltered embayment along the coast. Two separate approaches were taken to estimate this distance. The first used the median nearest neighbour distance between pods in relatively dense areas, giving a spacing distance of 2.16 km (± 0.94). The second estimated the spacing distance as the radius at which 50% of the population included no other pods, and was calculated as 1.93 km (range: 1.62-2.50 km). Using these values, the maximum number of pods able to fit into the resting area was 698 and 872 pods, respectively. Given an average observed pod size of 1.7 whales, this equates to a carrying capacity estimate of between 1187 and 1482 whales at any given point in time. This study demonstrates that whale pods do maintain a distance from each other, which may determine the number of animals that can occupy aggregation areas where space is limited. This requirement for space has implications when considering boundaries for protected areas or competition for space with the fishing and resources sectors.

The metabolic power and energetic demands of elite Gaelic football match play.

PubMed

Malone, Shane; Solan, Barry; Collins, Kieran; Doran, Dominic

2017-05-01

Metabolic power has not yet been investigated within elite Gaelic football. The aim of the current investigation was to compare the metabolic power demands between positional groups and examine the temporal profile of elite Gaelic football match play. Global positional satellite system (GPS) data were collected from 50 elite Gaelic football players from 4 inter-county teams during 35 elite competitive matches over a three season period. A total of 351 complete match samples were obtained for final analysis. Players were categorized based on positional groups; full-back, half-back, midfield, half-forward and full-forward. Instantaneous raw velocity data was obtained from the GPS and exported to a customized spreadsheet which provided estimations of both speed based, derived metabolic power and energy expenditure variables (total distance, high speed distance, average metabolic power, high power distance and total energy expenditure). Match mean distance was 9222±1588 m, reflective of an average metabolic power of 9.5-12.5 W·kg-1, with an average energy expenditure of 58-70 Kj·kg-1 depending on position. There were significant differences between positional groups for both speed-based and metabolic power indices. Midfielders covered more total and high-speed distance, as well as greater average and overall energy expenditure compared to other positions (P<0.001). A reduction in total, high-speed, and high-power distance, as well as average metabolic power throughout the match (P<0.001) was observed. Positional differences exist for both metabolic power and traditional running based variables. The middle three positions (midfield, half-back and half-forward) possess greater activity profiles when compared to other positional groups. The reduction in metabolic power and traditional running based variables are comparable across match play. The current study demonstrates that metabolic power may contribute to our understanding of Gaelic football match-play.

Concentrations of volatile organic compounds, carbon monoxide, carbon dioxide and particulate matter in buses on highways in Taiwan

NASA Astrophysics Data System (ADS)

Hsu, Der-Jen; Huang, Hsiao-Lin

2009-12-01

Although airborne pollutants in urban buses have been studied in many cities globally, long-distance buses running mainly on highways have not been addressed in this regard. This study investigates the levels of volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO 2) and particulate matter (PM) in the long-distance buses in Taiwan. Analytical results indicate that pollutants levels in long-distance buses are generally lower than those in urban buses. This finding is attributable to the driving speed and patterns of long-distance buses, as well as the meteorological and geographical features of the highway surroundings. The levels of benzene, toluene, ethylbenzene and xylene (BTEX) found in bus cabins exceed the proposed indoor VOC guidelines for aromatic compounds, and are likely attributable to the interior trim in the cabins. The overall average CO level is 2.3 ppm, with higher average level on local streets (2.9 ppm) than on highways (2.2 ppm). The average CO 2 level is 1493 ppm, which is higher than the guideline for non-industrial occupied settings. The average PM level in this study is lower than those in urban buses and IAQ guidelines set by Taiwan EPA. However, the average PM 10 and PM 2.5 is higher than the level set by WHO. Besides the probable causes mentioned above, fewer passenger movements and less particle re-suspension from bus floor might also cause the lower PM levels. Measurements of particle size distribution reveal that more than 75% of particles are in submicron and smaller sizes. These particles may come from the infiltration from the outdoor air. This study concludes that air exchange rates in long-distance buses should be increased in order to reduce CO 2 levels. Future research on long-distance buses should focus on the emission of VOCs from brand new buses, and the sources of submicron particles in bus cabins.

Plasma pressure distribution in the equatorial plane of the Earth's magnetosphere at geocentric distances of 6-10 R E according to the international THEMIS mission data

NASA Astrophysics Data System (ADS)

Kirpichev, I. P.; Antonova, E. E.

2011-08-01

The structure of the averaged plasma pressure distribution in the plasma ring around the Earth at geocentric distances of ˜6-10 R E has been determined. The distribution function moments measured on the international THEMIS mission satellites have been used. The plasma pressure distribution in the equatorial plane at 15 R E > XSM > -15 R E and 15 R E > YSM > -15 R E has been statistically studied. The radial dependence of the plasma pressure at the day-night and morning-evening meridians has been analyzed. It has been indicated that the plasma ring around the Earth has a structure, which is close to being azimuthally symmetric. The achieved results have been compared with the pressure distributions obtained previously. It has been indicated that in the overlapping regions, the achieved results agree with the previously obtained data within the pressure determination errors.

Cognitive distance, absorptive capacity and group rationality: a simulation study.

PubMed

Curşeu, Petru Lucian; Krehel, Oleh; Evers, Joep H M; Muntean, Adrian

2014-01-01

We report the results of a simulation study in which we explore the joint effect of group absorptive capacity (as the average individual rationality of the group members) and cognitive distance (as the distance between the most rational group member and the rest of the group) on the emergence of collective rationality in groups. We start from empirical results reported in the literature on group rationality as collective group level competence and use data on real-life groups of four and five to validate a mathematical model. We then use this mathematical model to predict group level scores from a variety of possible group configurations (varying both in cognitive distance and average individual rationality). Our results show that both group competence and cognitive distance are necessary conditions for emergent group rationality. Group configurations, in which the groups become more rational than the most rational group member, are groups scoring low on cognitive distance and scoring high on absorptive capacity.

Cognitive Distance, Absorptive Capacity and Group Rationality: A Simulation Study

PubMed Central

Curşeu, Petru Lucian; Krehel, Oleh; Evers, Joep H. M.; Muntean, Adrian

2014-01-01

We report the results of a simulation study in which we explore the joint effect of group absorptive capacity (as the average individual rationality of the group members) and cognitive distance (as the distance between the most rational group member and the rest of the group) on the emergence of collective rationality in groups. We start from empirical results reported in the literature on group rationality as collective group level competence and use data on real-life groups of four and five to validate a mathematical model. We then use this mathematical model to predict group level scores from a variety of possible group configurations (varying both in cognitive distance and average individual rationality). Our results show that both group competence and cognitive distance are necessary conditions for emergent group rationality. Group configurations, in which the groups become more rational than the most rational group member, are groups scoring low on cognitive distance and scoring high on absorptive capacity. PMID:25314132

Heterogeneity Measurement Based on Distance Measure for Polarimetric SAR Data

NASA Astrophysics Data System (ADS)

Xing, Xiaoli; Chen, Qihao; Liu, Xiuguo

2018-04-01

To effectively test the scene heterogeneity for polarimetric synthetic aperture radar (PolSAR) data, in this paper, the distance measure is introduced by utilizing the similarity between the sample and pixels. Moreover, given the influence of the distribution and modeling texture, the K distance measure is deduced according to the Wishart distance measure. Specifically, the average of the pixels in the local window replaces the class center coherency or covariance matrix. The Wishart and K distance measure are calculated between the average matrix and the pixels. Then, the ratio of the standard deviation to the mean is established for the Wishart and K distance measure, and the two features are defined and applied to reflect the complexity of the scene. The proposed heterogeneity measure is proceeded by integrating the two features using the Pauli basis. The experiments conducted on the single-look and multilook PolSAR data demonstrate the effectiveness of the proposed method for the detection of the scene heterogeneity.

Spatial variability in airborne pollen concentrations.

PubMed

Raynor, G S; Ogden, E C; Hayes, J V

1975-03-01

Tests were conducted to determine the relationship between airborne pollen concentrations and distance. Simultaneous samples were taken in 171 tests with sets of eight rotoslide samplers spaced from one to 486 M. apart in straight lines. Use of all possible pairs gave 28 separation distances. Tests were conducted over a 2-year period in urban and rural locations distant from major pollen sources during both tree and ragweed pollen seasons. Samples were taken at a height of 1.5 M. during 5-to 20-minute periods. Tests were grouped by pollen type, location, year, and direction of the wind relative to the line. Data were analyzed to evaluate variability without regard to sampler spacing and variability as a function of separation distance. The mean, standard deviation, coefficient of variation, ratio of maximum to the mean, and ratio of minimum to the mean were calculated for each test, each group of tests, and all cases. The average coefficient of variation is 0.21, the maximum over the mean, 1.39 and the minimum over the mean, 0.69. No relationship was found with experimental conditions. Samples taken at the minimum separation distance had a mean difference of 18 per cent. Differences between pairs of samples increased with distance in 10 of 13 groups. These results suggest that airborne pollens are not always well mixed in the lower atmosphere and that a sample becomes less representative with increasing distance from the sampling location.

The average magnetic field draping and consistent plasma properties of the Venus magnetotail

NASA Technical Reports Server (NTRS)

Mccomas, D. J.; Spence, H. E.; Russell, C. T.; Saunders, M. A.

1986-01-01

The detailed average draping pattern of the magnetic field in the deep Venus magnetotail is examined. The variability of the data ordered by spatial location is studied, and the groundwork is laid for developing a coordinate system which measured locations with respect to the tail structures. The reconstruction of the tail in the presence of flapping using a new technique is shown, and the average variations in the field components are examined, including the average field vectors, cross-tail current density distribution, and J x B forces as functions of location across the tail. The average downtail velocity is derived as a function of distance, and a simple model based on the field variations is defined from which the average plasma acceleration is obtained as a function of distance, density, and temperature.

Radiation safety implications of 131I treatment in a patient with Grave's disease undergoing home hemodialysis.

PubMed

Simpson, J B; Godwin, G A

2006-12-01

The radiation safety implications following the administration of 131I for the treatment of Grave's disease to a patient undergoing home-based renal dialysis was investigated. External dose-rate measurements from the patient revealed a peak value at around day 2, post administration. The effective half-life was determined as 6.5 d. From day 3, the clearance of 131I was observed to be fairly constant and equated to 2.7% per day or 5.4% per dialysis session. From this the biological half-life was determined as 15 d. Radiation monitoring of the dialysis unit, disposables, and bed linen found no detectable contamination. For the purpose of useful protection, at a distance of 1 m from the patient, the average dose rate over the effective treatment duration was determined to be 8 microSv h(-1) and at 2 m distance, 2.6 microSv h(-1). Thus, in order to keep below a level of dose constraint of 3 mSv the total allowable time spent at 1 m would be 375 h or 15 h per day. To comply with a 1-mSv constraint, the average daily exposure allowable at 1 m would be 5 h per day. Neither of these time limits would be difficult to achieve for the majority of situations with fairly modest behavioral constraints. Initial discharge concentration rates into the waste water system are estimated at 200 MBq m(-3) and therefore might need to be considered depending upon the regulatory environment.

Finding Distances to Type Ia Supernovae

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-03-01

Type Ia supernovae are known as standard candles due to their consistency, allowing us to measure distances based on their brightness. But what if these explosions arent quite as consistent as we thought? Due scientific diligence requires careful checks, so a recent study investigates whether the metallicity of a supernovas environment affects the peak luminosity of the explosion.Metallicity Dependence?Type Ia supernovae are incredibly powerful tools for determining distances in our universe. Because these supernovae are formed by white dwarfs that explode when they reach a uniform accreted mass, the supernova peak luminosity is thought to be very consistent. This consistency allows these supernovae to be used as standard candles to measure distances to their host galaxies.But what if that peak luminosity is affected by a factor that we havent taken into account? Theorists have proposed that the luminosities of Type Ia supernovae might depend on the metallicity of their environments with high-metallicity environments suppressing supernova luminosities. If this is true, then we could be systematically mis-measuring cosmological distances using these supernovae.Testing AbundancesSupernova brightnesses vs. the metallicity of their environments. Low-metallicity supernovae (blue shading) and high-metallicity supernovae (red shading) have an average magnitude difference of ~0.14. [Adapted from Moreno-Raya et al. 2016]A team led by Manuel Moreno-Raya, of the Center for Energy, Environment and Technology (CIEMAT) in Spain, has observed 28 Type Ia supernovae in an effort to test for such a metallicity dependence. These supernovae each have independent distance measurements (e.g., from Cepheids or the Tully-Fisher relation).Moreno-Raya and collaborators used spectra from the 4.2-m William Herschel Telescope to estimate oxygen abundances in the region where each of these supernovae exploded. They then used these measurements to determine if metallicity of the local region affects the luminosity of the supernova.Determining DistancesThe authors find that there are indeed differences in peak supernova luminosity based on metallicity of the local environment. Their observations support a trend in which more metal-rich galaxies host less luminous supernovae, whereas lower-metallicity galaxies host supernovae with greater luminosities consistent with theoretical predictions.This observational confirmation suggests that the metallicity of the progenitor may well play a role in peak supernova luminosity and, as a result, the distances at which we estimate they exploded. This systematic effect can, however, be easily corrected for in the distance-estimate procedure.As the number of known supernovae is expected to drastically increase with the start of future large surveys such as the Large Synoptic Survey Telescope (LSST) or the Dark Energy Survey (DES), supernova distance measurements will soon be dominated by systematic errors rather than statistical ones. Correctly accounting for effects such as this apparent metallicity-dependence of supernovae continues to be important for accurately determining distances using Type Ia supernovae as indicators.CitationManuel E. Moreno-Raya et al 2016 ApJ 818 L19. doi:10.3847/2041-8205/818/1/L19

Oppugning the assumptions of spatial averaging of segment and joint orientations.

PubMed

Pierrynowski, Michael Raymond; Ball, Kevin Arthur

2009-02-09

Movement scientists frequently calculate "arithmetic averages" when examining body segment or joint orientations. Such calculations appear routinely, yet are fundamentally flawed. Three-dimensional orientation data are computed as matrices, yet three-ordered Euler/Cardan/Bryant angle parameters are frequently used for interpretation. These parameters are not geometrically independent; thus, the conventional process of averaging each parameter is incorrect. The process of arithmetic averaging also assumes that the distances between data are linear (Euclidean); however, for the orientation data these distances are geodesically curved (Riemannian). Therefore we question (oppugn) whether use of the conventional averaging approach is an appropriate statistic. Fortunately, exact methods of averaging orientation data have been developed which both circumvent the parameterization issue, and explicitly acknowledge the Euclidean or Riemannian distance measures. The details of these matrix-based averaging methods are presented and their theoretical advantages discussed. The Euclidian and Riemannian approaches offer appealing advantages over the conventional technique. With respect to practical biomechanical relevancy, examinations of simulated data suggest that for sets of orientation data possessing characteristics of low dispersion, an isotropic distribution, and less than 30 degrees second and third angle parameters, discrepancies with the conventional approach are less than 1.1 degrees . However, beyond these limits, arithmetic averaging can have substantive non-linear inaccuracies in all three parameterized angles. The biomechanics community is encouraged to recognize that limitations exist with the use of the conventional method of averaging orientations. Investigations requiring more robust spatial averaging over a broader range of orientations may benefit from the use of matrix-based Euclidean or Riemannian calculations.

Changes in distribution of Canada geese nesting in Arkansas

USGS Publications Warehouse

Krementz, David G.; Ronke, M. Eliese

2015-01-01

The reintroduced Canada goose (Branta canadensis) population in Arkansas has grown in range and abundance in recent decades. We determined the geographic range of Arkansas resident Canada geese from 2004 to 2012 using volume contour maps from citizen science observations using eBird, a citizen science website, and hunter recovery locations from the U.S. Geological Survey Bird Banding Laboratory. Resulting maps indicate an increase in Canada goose encounters toward northwestern and southwestern Arkansas from the original relocations in the Arkansas River valley. We examined movement of Canada geese banded and recovered in Arkansas by determining the distance and angle of movement between initial and final encounter locations; 25% moved east, and 17% went west. The average distance moved from banding to recovery was 50 km (SE = 1 km). Recoveries of Canada geese banded in Arkansas were greatest in the Mississippi Flyway (58% of all geese) followed by the Central Flyway (37%) with some representation in both the Atlantic (4%) and Pacific flyways (0.9%). Movement from Arkansas to other states and Canada was influenced by goose age and sex. Older individuals traveled longer distances than younger ones, and females traveled longer distances than males. Our findings suggest that recently established Canada geese in Arkansas have slowly expanded within the state to the northwest and southwest with the expansion to the east being important now. Movement of Arkansas resident Canada geese on molt-migration can contribute to management issues in other states and provinces.

Energy system contributions in middle-distance running events.

PubMed

Hill, D W

1999-06-01

The aim of this study was to estimate the energy contributions in middle-distance running events for male and female university athletes. The oxygen uptake (VO2) response during high-speed running was measured directly during exhaustive treadmill tests. Muscle mass was estimated using anthropometry. Each athlete completed an average of three races over 400 m, 800 m or 1500 m. Five minutes after each race, they provided a blood sample for determination of blood lactate concentration. For each race, energy cost, which was expressed as oxygen equivalents, was calculated as the sum of the aerobic and anaerobic components. The aerobic contribution was calculated as the sum of oxygen stores (2.3 ml O2.kg body mass-1) and total VO2 (based on the VO2 response to treadmill running). The anaerobic contribution was calculated as the sum of the energy available from phosphocreatine stores (37 ml O2.kg muscle mass-1) and the energy from glycolysis (3.0 ml O2.kg body mass-1 per mmol.l-1 increase in blood lactate concentration). For the women, the anaerobic energy contributions for the 400 m, 800 m and 1500 m averaged 62%, 33% and 17%, respectively. For the men, the anaerobic contributions averaged 63%, 39% and 20%, respectively. This information will help coaches and sport scientists to design and implement individualized training programmes.

Morphological features of the maxillary incisors roots and relationship with neighbouring anatomical structures: possible implications in endodontic surgery.

PubMed

Taschieri, S; Weinstein, T; Rosano, G; Del Fabbro, M

2012-05-01

The purpose of this study was to investigate the relationship between the root apex of the upper incisors and neighbouring anatomical structures as well as the morphology of the root-end foramen after apicoectomy. Fifty-seven patients requiring endodontic surgical treatment for a maxillary anterior root were enrolled. A preoperative diagnostic computed tomography (CT) scan was analysed to determine: the distance between the anterior wall of the nasopalatine duct and the central (CI-ND) incisor root 4mm from the apex; and the distance between the floor of the nasal cavity and the tip of either the central (CI-NF) or the lateral (LI-NF) incisor root. After apicoectomy, root-end foramen endoscopic pictures were taken in order to characterize their morphology. Fifty-nine central and 26 lateral incisors were evaluated. The average CI-ND was 4.71 ± 1.26 (SD) mm. The average CI-NF was 10.62 ± 2.25 mm. The average LI-NF was 13.05 ± 2.43 mm. The foramen shape after apicoectomy was ovoid to circular in about 90% of cases in both central and lateral incisors. A sound knowledge of the anatomical relationships at the surgical site is essential for the clinician to perform a safe endodontic surgical procedure. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Morphometric and electrophoretic analysis of 13 populations of Anatolian black pine in Turkey.

PubMed

Turna, Ibrahim; Yahyaoglu, Zeki; Yüksek, Filiz; Ayaz, F Ahmet; Guney, Deniz

2006-07-01

The genetic variation in populations of Anatolian black pine (Pinus nigra Arn. subsp. pallasiana (L.) Holmboe.), one of the species covering large areas in Turkey, was investigated. Open pollinated seeds were collected from 13 populations in a natural distribution range. Six characters of seeds (length, width, ratio of length to width, weight/1000 seeds) and seedling characters (cotyledon number and hypocotyls height) and two enzyme systems viz. leucine aminopeptidase (LAP) and glutamate oxaloacetate transaminase, (GOT) were investigated. Significant differences were detected among the populations for the morphological characters. In addition, isozyme patterns of two enzyme systems revealed that LAP has two loci (one with 2 alleles and the other with 3), while GOT has three loci (two with 3 alleles and the third one with 2 alleles). Polymorphic loci were 74% on the average. The mean number of alleles per loci was 1.94 and expected heterozygosity was 19%. The mean total genetic diversity was calculated as 0.203; the mean gene diversity within populations was determined as 0.188, and the average between subpopulations diversity was 0.016. The relative magnitude of genetic differentiation among subpopulations was measured as 0.074 indicating that only 7.4% of the total genetic diversity was there between populations. Average genetic distance was 0.093 according to Gregorius. Nei's genetic distance was 0.022.

Genomic Characterization Helps Dissecting an Outbreak of Listeriosis in Northern Italy.

PubMed

Comandatore, Francesco; Corbella, Marta; Andreoli, Giuseppina; Scaltriti, Erika; Aguzzi, Massimo; Gaiarsa, Stefano; Mariani, Bianca; Morganti, Marina; Bandi, Claudio; Fabbi, Massimo; Marone, Piero; Pongolini, Stefano; Sassera, Davide

2017-07-06

Listeria monocytogenes (Lm) is a bacterium widely distributed in nature and able to contaminate food processing environments, including those of dairy products. Lm is a primary public health issue, due to the very low infectious dose and the ability to produce severe outcomes, in particular in elderly, newborns, pregnant women and immunocompromised patients. In the period between April and July 2015, an increased number of cases of listeriosis was observed in the area of Pavia, Northern Italy. An epidemiological investigation identified a cheesemaking small organic farm as the possible origin of the outbreak. In this work we present the results of the retrospective epidemiological study that we performed using molecular biology and genomic epidemiology methods. The strains sampled from patients and those from the target farm's cheese were analyzed using PFGE and whole genome sequencing (WGS) based methods. The performed WGS based analyses included: a) in-silico MLST typing; b) SNPs calling and genetic distance evaluation; c) determination of the resistance and virulence genes profiles; d) SNPs based phylogenetic reconstruction. Three of the patient strains and all the cheese strains resulted to belong to the same phylogenetic cluster, in Sequence Type 29. A further accurate SNPs analysis revealed that two of the three patient strains and all the cheese strains were highly similar (0.8 SNPs of average distance) and exhibited a higer distance from the third patient isolate (9.4 SNPs of average distance). Despite the global agreement among the results of the PFGE and WGS epidemiological studies, the latter approach agree with epidemiological data in indicating that one the patient strains could have originated from a different source. This result highlights that WGS methods can allow to better.

Genomic Characterization Helps Dissecting an Outbreak of Listeriosis in Northern Italy

PubMed Central

Comandatore, Francesco; Corbella, Marta; Andreoli, Giuseppina; Scaltriti, Erika; Aguzzi, Massimo; Gaiarsa, Stefano; Mariani, Bianca; Morganti, Marina; Bandi, Claudio; Fabbi, Massimo; Marone, Piero; Pongolini, Stefano; Sassera, Davide

2017-01-01

Introduction Listeria monocytogenes (Lm) is a bacterium widely distributed in nature and able to contaminate food processing environments, including those of dairy products. Lm is a primary public health issue, due to the very low infectious dose and the ability to produce severe outcomes, in particular in elderly, newborns, pregnant women and immunocompromised patients. Methods In the period between April and July 2015, an increased number of cases of listeriosis was observed in the area of Pavia, Northern Italy. An epidemiological investigation identified a cheesemaking small organic farm as the possible origin of the outbreak. In this work we present the results of the retrospective epidemiological study that we performed using molecular biology and genomic epidemiology methods. The strains sampled from patients and those from the target farm's cheese were analyzed using PFGE and whole genome sequencing (WGS) based methods. The performed WGS based analyses included: a) in-silico MLST typing; b) SNPs calling and genetic distance evaluation; c) determination of the resistance and virulence genes profiles; d) SNPs based phylogenetic reconstruction. Results Three of the patient strains and all the cheese strains resulted to belong to the same phylogenetic cluster, in Sequence Type 29. A further accurate SNPs analysis revealed that two of the three patient strains and all the cheese strains were highly similar (0.8 SNPs of average distance) and exhibited a higer distance from the third patient isolate (9.4 SNPs of average distance). Discussion Despite the global agreement among the results of the PFGE and WGS epidemiological studies, the latter approach agree with epidemiological data in indicating that one the patient strains could have originated from a different source. This result highlights that WGS methods can allow to better PMID:28856063

ORBITING CLUSTERS IN ATOMIC NUCLEI

PubMed Central

Pauling, Linus

1969-01-01

As an alternative to their description as vibrational levels, the low excited states of even-even nuclei can be described as rotational states of a helion, dineutron, diproton, or other cluster about the rest of the nucleus, leading to reasonable values of the average distance between centers of the clusters. Some states involve rotational excitation of two or more helions or other clusters. The nature of the rotating clusters is determined by the relation of the neutron and proton numbers to the magic numbers. PMID:16591799

A Note on the Kirchhoff and Additive Degree-Kirchhoff Indices of Graphs

NASA Astrophysics Data System (ADS)

Yang, Yujun; Klein, Douglas J.

2015-06-01

Two resistance-distance-based graph invariants, namely, the Kirchhoff index and the additive degree-Kirchhoff index, are studied. A relation between them is established, with inequalities for the additive degree-Kirchhoff index arising via the Kirchhoff index along with minimum, maximum, and average degrees. Bounds for the Kirchhoff and additive degree-Kirchhoff indices are also determined, and extremal graphs are characterised. In addition, an upper bound for the additive degree-Kirchhoff index is established to improve a previously known result.

Use of a pitot probe for determining wing section drag in flight

NASA Technical Reports Server (NTRS)

Saltzman, E. J.

1975-01-01

A wake traversing probe was used to obtain section drag and wake profile data from the wing of a sailplane. The transducer sensed total pressure defect in the wake as well as freestream total pressure on both sides of the sensing element when the probe moved beyond the wake. Profiles of wake total pressure defects plotted as a function of distance above and below the trailing edge plane were averaged for calculating section drag coefficients for flights at low dynamic pressures.

A hybrid correlation analysis with application to imaging genetics

NASA Astrophysics Data System (ADS)

Hu, Wenxing; Fang, Jian; Calhoun, Vince D.; Wang, Yu-Ping

2018-03-01

Investigating the association between brain regions and genes continues to be a challenging topic in imaging genetics. Current brain region of interest (ROI)-gene association studies normally reduce data dimension by averaging the value of voxels in each ROI. This averaging may lead to a loss of information due to the existence of functional sub-regions. Pearson correlation is widely used for association analysis. However, it only detects linear correlation whereas nonlinear correlation may exist among ROIs. In this work, we introduced distance correlation to ROI-gene association analysis, which can detect both linear and nonlinear correlations and overcome the limitation of averaging operations by taking advantage of the information at each voxel. Nevertheless, distance correlation usually has a much lower value than Pearson correlation. To address this problem, we proposed a hybrid correlation analysis approach, by applying canonical correlation analysis (CCA) to the distance covariance matrix instead of directly computing distance correlation. Incorporating CCA into distance correlation approach may be more suitable for complex disease study because it can detect highly associated pairs of ROI and gene groups, and may improve the distance correlation level and statistical power. In addition, we developed a novel nonlinear CCA, called distance kernel CCA, which seeks the optimal combination of features with the most significant dependence. This approach was applied to imaging genetic data from the Philadelphia Neurodevelopmental Cohort (PNC). Experiments showed that our hybrid approach produced more consistent results than conventional CCA across resampling and both the correlation and statistical significance were increased compared to distance correlation analysis. Further gene enrichment analysis and region of interest (ROI) analysis confirmed the associations of the identified genes with brain ROIs. Therefore, our approach provides a powerful tool for finding the correlation between brain imaging and genomic data.

D2N: Distance to the native.

PubMed

Mishra, Avinash; Rana, Prashant Singh; Mittal, Aditya; Jayaram, B

2014-10-01

Root-mean-square-deviation (RMSD), of computationally-derived protein structures from experimentally determined structures, is a critical index to assessing protein-structure-prediction-algorithms (PSPAs). The development of PSPAs to obtain 0Å RMSD from native structures is considered central to computational biology. However, till date it has been quite challenging to measure how far a predicted protein structure is from its native - in the absence of a known experimental/native structure. In this work, we report the development of a metric "D2N" (distance to the native) - that predicts the "RMSD" of any structure without actually knowing the native structure. By combining physico-chemical properties and known universalities in spatial organization of soluble proteins to develop D2N, we demonstrate the ability to predict the distance of a proposed structure to within ±1.5Ǻ error with a remarkable average accuracy of 93.6% for structures below 5Ǻ from the native. We believe that this work opens up a completely new avenue towards assigning reliable structures to whole proteomes even in the absence of experimentally determined native structures. The D2N tool is freely available at http://www.scfbio-iitd.res.in/software/d2n.jsp. Copyright © 2014 Elsevier B.V. All rights reserved.

Exploring the nature and synchronicity of early cluster formation in the Large Magellanic Cloud - II. Relative ages and distances for six ancient globular clusters

NASA Astrophysics Data System (ADS)

Wagner-Kaiser, R.; Mackey, Dougal; Sarajedini, Ata; Chaboyer, Brian; Cohen, Roger E.; Yang, Soung-Chul; Cummings, Jeffrey D.; Geisler, Doug; Grocholski, Aaron J.

2017-11-01

We analyse Hubble Space Telescope observations of six globular clusters in the Large Magellanic Cloud (LMC) from programme GO-14164 in Cycle 23. These are the deepest available observations of the LMC globular cluster population; their uniformity facilitates a precise comparison with globular clusters in the Milky Way. Measuring the magnitude of the main-sequence turn-off point relative to template Galactic globular clusters allows the relative ages of the clusters to be determined with a mean precision of 8.4 per cent, and down to 6 per cent for individual objects. We find that the mean age of our LMC cluster ensemble is identical to the mean age of the oldest metal-poor clusters in the Milky Way halo to 0.2 ± 0.4 Gyr. This provides the most sensitive test to date of the synchronicity of the earliest epoch of globular cluster formation in two independent galaxies. Horizontal branch magnitudes and subdwarf fitting to the main sequence allow us to determine distance estimates for each cluster and examine their geometric distribution in the LMC. Using two different methods, we find an average distance to the LMC of 18.52 ± 0.05.

On the safety assessment of human exposure in the proximity of cellular communications base-station antennas at 900, 1800 and 2170 MHz.

PubMed

Martínez-Búrdalo, M; Martín, A; Anguiano, M; Villar, R

2005-09-07

In this work, the procedures for safety assessment in the close proximity of cellular communications base-station antennas at three different frequencies (900, 1800 and 2170 MHz) are analysed. For each operating frequency, we have obtained and compared the distances to the antenna from the exposure places where electromagnetic fields are below reference levels and the distances where the specific absorption rate (SAR) values in an exposed person are below the basic restrictions, according to the European safety guidelines. A high-resolution human body model has been located, in front of each base-station antenna as a worst case, at different distances, to compute whole body averaged SAR and maximum 10 g averaged SAR inside the exposed body. The finite-difference time-domain method has been used for both electromagnetic fields and SAR calculations. This paper shows that, for antenna-body distances in the near zone of the antenna, the fact that averaged field values be below the reference levels could, at certain frequencies, not guarantee guidelines compliance based on basic restrictions.

Proportion offered in the Dictator and Ultimatum Games decreases with amount and social distance.

PubMed

Bechler, Christopher; Green, Leonard; Myerson, Joel

2015-06-01

Behavior in both the Dictator Game and the Ultimatum Game is of special interest because proposers often violate the predictions of normative economic theory: On average, offers in both games are higher than what would be considered income-maximizing. In the present study, the initial amount provided to the proposer and the social distance between the proposer and the respondent were both varied across a wide range, and the effects of these manipulations on offers in the Dictator Game and the Ultimatum Game were examined in a broad sample of participants recruited via MTurk. Although the amount offered was consistently higher in the Ultimatum Game, the proportion of the amount offered decreased as the size of the initial amount increased in both games. Moreover, the proportion offered also decreased as a function of the social distance between the proposer and the responder. The present results extend our knowledge of the determinants of proposers' behavior in two-person economic games and emphasize the importance of social distance and the amount of money at stake as factors that affect people's economic decisions. Copyright © 2015 Elsevier B.V. All rights reserved.

Flap Conformations in HIV-1 Protease are Altered by Mutations

NASA Astrophysics Data System (ADS)

Fanucci, Gail; Blackburn, Mandy; Veloro, Angelo; Galiano, Luis; Fangu, Ding; Simmerling, Carlos

2009-03-01

HIV-1 protease (PR) is an enzyme that is a major drug target in the treatment of AIDS. Although the structure and function of HIV-1 PR have been studied for over 20 years, questions remain regarding the conformations and dynamics of the β-hairpin turns (flaps) that cover the active site cavity. Distance measurements with pulsed EPR spectroscopy of spin labeled constructs of HIV-1 PR have been used to characterize the flap conformations in the apo and inhibitor bound states. From the most probably distances and the breadth of the distance distribution profiles from analysis of the EPR data, insights regarding the flap conformations and flexibility are gained. The EPR results clearly show how drug pressure selected mutations alter the average conformation of the flaps and the degree of opening of the flaps. Molecular dynamics simulations successfully regenerate the experimentally determined distance distribution profiles, and more importantly, provide structural models for full interpretation of the EPR results. By combining experiment and theory to understand the role that altered flap flexibility/conformations play in the mechanism of drug resistance, key insights are gained toward the rational development of new inhibitors of this important enzyme.

Relationship Between Maximum Aerobic Speed Performance and Distance Covered in Rugby Union Games.

PubMed

Swaby, Rick; Jones, Paul A; Comfort, Paul

2016-10-01

Swaby, R, Jones, PA, and Comfort, P. Relationship between maximum aerobic speed performance and distance covered in rugby union games. J Strength Cond Res 30(10): 2788-2793, 2016-Researchers have shown a clear relationship between aerobic fitness and the distance covered in professional soccer, although no research has identified such a relationship in rugby union. Therefore, the aim of the study was to identify whether there was a relationship between maximal aerobic speed (MAS) and the distance covered in rugby union games. Fourteen professional rugby union players (age = 26 ± 6 years, height = 1.90 ± 0.12 m, mass = 107.1 ± 24.1 kg) participated in this investigation. Each player performed a MAS test on 3 separate occasions during the preseason, to determine reliability and provide baseline data, and participated in 6 competitive games during the early stages of the season. Game data were collected using global positioning system technology. No significant difference (p > 0.05) in total distance covered was observed between games. Relationships between players' MAS and the average distance covered from 6 competitive games were explored using Pearson's correlation coefficients, with MAS performance showing a strong relationship with distance covered during match play (r = 0.746, p < 0.001). Significantly greater (p = 0.001, Cohen's d = 2.29) distances were covered by backs (6,544 ± 573 m) compared with the forwards (4,872 ± 857 m) during a game. Similarly, backs recorded a significantly (p = 0.001, Cohen's d = 2.20) higher MAS (4.9 ± 0.13 m·s) compared with the forwards (4.2 ± 0.43 m·s). Results of the study illustrate the importance of developing high levels of aerobic fitness to increase the distance that the athlete covers in the game.

The effect of age on the racing speed of Thoroughbred racehorses

PubMed Central

TAKAHASHI, Toshiyuki

2015-01-01

ABSTRACT The running performance of Thoroughbred racehorses has been reported to peak when they are between 4 and 5 years old. However, changes in their racing speed by month or season have not been reported. The purposes of this study were to reveal the average racing speed of Thoroughbreds, and observe changes in their average speed with age. The surveyed races were flat races on turf and dirt tracks with firm or standard track conditions held by the Japan Racing Association from January 1st, 2002 to December 31st, 2010. The racing speed of each horse was calculated by dividing the race distance (m) by the horse’s final time (sec). Average speeds per month for each age and distance condition were calculated for each gender group when there were 30 or more starters per month for each age and distance condition for each gender group. The common characteristic change for all conditions was an average speed increase up until the first half of the age of 4 years old. The effect of increased carry weight on average speed was small, and average speed increased with the growth of the horse. After the latter half of the age of 4 years old, the horses’ average speed remained almost constant, with little variation. It is speculated that decreases in the weight carried; and the retirement of less well performing horses; are responsible for the maintenance of average speed. PMID:26170760

Average luminosity distance in inhomogeneous universes

NASA Astrophysics Data System (ADS)

Kostov, Valentin Angelov

Using numerical ray tracing, the paper studies how the average distance modulus in an inhomogeneous universe differs from its homogeneous counterpart. The averaging is over all directions from a fixed observer not over all possible observers (cosmic), thus it is more directly applicable to our observations. Unlike previous studies, the averaging is exact, non-perturbative, an includes all possible non-linear effects. The inhomogeneous universes are represented by Sweese-cheese models containing random and simple cubic lattices of mass- compensated voids. The Earth observer is in the homogeneous cheese which has an Einstein - de Sitter metric. For the first time, the averaging is widened to include the supernovas inside the voids by assuming the probability for supernova emission from any comoving volume is proportional to the rest mass in it. For voids aligned in a certain direction, there is a cumulative gravitational lensing correction to the distance modulus that increases with redshift. That correction is present even for small voids and depends on the density contrast of the voids, not on their radius. Averaging over all directions destroys the cumulative correction even in a non-randomized simple cubic lattice of voids. Despite the well known argument for photon flux conservation, the average distance modulus correction at low redshifts is not zero due to the peculiar velocities. A formula for the maximum possible average correction as a function of redshift is derived and shown to be in excellent agreement with the numerical results. The formula applies to voids of any size that: (1) have approximately constant densities in their interior and walls, (2) are not in a deep nonlinear regime. The actual average correction calculated in random and simple cubic void lattices is severely damped below the predicted maximum. That is traced to cancelations between the corrections coming from the fronts and backs of different voids at the same redshift from the observer. The calculated correction at low redshifts allows one to readily predict the redshift at which the averaged fluctuation in the Hubble diagram is below a required precision and suggests a method to extract the background Hubble constant from low redshift data without the need to correct for peculiar velocities.

VizieR Online Data Catalog: 5 Galactic GC proper motions from Gaia DR1 (Watkins+, 2017)

NASA Astrophysics Data System (ADS)

Watkins, L. L.; van der Marel, R. P.

2017-11-01

We present a pilot study of Galactic globular cluster (GC) proper motion (PM) determinations using Gaia data. We search for GC stars in the Tycho-Gaia Astrometric Solution (TGAS) catalog from Gaia Data Release 1 (DR1), and identify five members of NGC 104 (47 Tucanae), one member of NGC 5272 (M3), five members of NGC 6121 (M4), seven members of NGC 6397, and two members of NGC 6656 (M22). By taking a weighted average of member stars, fully accounting for the correlations between parameters, we estimate the parallax (and, hence, distance) and PM of the GCs. This provides a homogeneous PM study of multiple GCs based on an astrometric catalog with small and well-controlled systematic errors and yields random PM errors similar to existing measurements. Detailed comparison to the available Hubble Space Telescope (HST) measurements generally shows excellent agreement, validating the astrometric quality of both TGAS and HST. By contrast, comparison to ground-based measurements shows that some of those must have systematic errors exceeding the random errors. Our parallax estimates have uncertainties an order of magnitude larger than previous studies, but nevertheless imply distances consistent with previous estimates. By combining our PM measurements with literature positions, distances, and radial velocities, we measure Galactocentric space motions for the clusters and find that these also agree well with previous analyses. Our analysis provides a framework for determining more accurate distances and PMs of Galactic GCs using future Gaia data releases. This will provide crucial constraints on the near end of the cosmic distance ladder and provide accurate GC orbital histories. (4 data files).

Comparison of pitot traverses taken at varying distances downstream of obstructions.

PubMed

Guffey, S E; Booth, D W

1999-01-01

This study determined the deviations between pitot traverses taken under "ideal" conditions--at least seven duct diameter's lengths (i.e., distance = 7D) from obstructions, elbows, junction fittings, and other disturbances to flows--with those taken downstream from commonplace disturbances. Two perpendicular 10-point, log-linear velocity pressure traverses were taken at various distances downstream of tested upstream conditions. Upstream conditions included a plain duct opening, a junction fitting, a single 90 degrees elbow, and two elbows rotated 90 degrees from each other into two orthogonal planes. Airflows determined from those values were compared with the values measured more than 40D downstream of the same obstructions under ideal conditions. The ideal measurements were taken on three traverse diameters in the same plane separated by 120 degrees in honed drawn-over-mandrel tubing. In all cases the pitot tubes were held in place by devices that effectively eliminated alignment errors and insertion depth errors. Duct velocities ranged from 1500 to 4500 ft/min. Results were surprisingly good if one employed two perpendicular traverses. When the averages of two perpendicular traverses was taken, deviations from ideal value were 6% or less even for traverses taken as close as 2D distance from the upstream disturbances. At 3D distance, deviations seldom exceeded 5%. With single diameter traverses, errors seldom exceeded 5% at 6D or more downstream from the disturbance. Interestingly, percentage deviations were about the same at high and low velocities. This study demonstrated that two perpendicular pitot traverses can be taken as close as 3D from these disturbances with acceptable (< or = 5%) deviations from measurements taken under ideal conditions.

Tycho- Gaia Astrometric Solution Parallaxes and Proper Motions for Five Galactic Globular Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watkins, Laura L.; Van der Marel, Roeland P., E-mail: lwatkins@stsci.edu

2017-04-20

We present a pilot study of Galactic globular cluster (GC) proper motion (PM) determinations using Gaia data. We search for GC stars in the Tycho- Gaia Astrometric Solution (TGAS) catalog from Gaia Data Release 1 (DR1), and identify five members of NGC 104 (47 Tucanae), one member of NGC 5272 (M3), five members of NGC 6121 (M4), seven members of NGC 6397, and two members of NGC 6656 (M22). By taking a weighted average of member stars, fully accounting for the correlations between parameters, we estimate the parallax (and, hence, distance) and PM of the GCs. This provides a homogeneousmore » PM study of multiple GCs based on an astrometric catalog with small and well-controlled systematic errors and yields random PM errors similar to existing measurements. Detailed comparison to the available Hubble Space Telescope ( HST ) measurements generally shows excellent agreement, validating the astrometric quality of both TGAS and HST . By contrast, comparison to ground-based measurements shows that some of those must have systematic errors exceeding the random errors. Our parallax estimates have uncertainties an order of magnitude larger than previous studies, but nevertheless imply distances consistent with previous estimates. By combining our PM measurements with literature positions, distances, and radial velocities, we measure Galactocentric space motions for the clusters and find that these also agree well with previous analyses. Our analysis provides a framework for determining more accurate distances and PMs of Galactic GCs using future Gaia data releases. This will provide crucial constraints on the near end of the cosmic distance ladder and provide accurate GC orbital histories.« less

Social dynamics in emergency evacuations: Disentangling crowd's attraction and repulsion effects

NASA Astrophysics Data System (ADS)

Haghani, Milad; Sarvi, Majid

2017-06-01

The social dynamics of crowds in emergency escape scenarios have been conventionally modelled as the net effect of virtual forces exerted by the crowd on each individual (as self-driven particles), with the magnitude of the influence formulated as decreasing functions of inter-individual distances and the direction of effect assumed to be transitioning from repulsion to attraction by distance. Here, we revisit this conventional assumption using laboratory experimental data. We show based on robust econometric hypothesis-testing methods that individuals' perception of other escapees differs based on whether those individuals are jamming around exit destinations or are on the move towards the destinations. Also, for moving crowds, it differs based on whether the escape destination chosen by the moving flow is visible or invisible to the individual. The presence of crowd jams around a destination, also the movement of crowd flows towards visible destinations are both perceived on average as repulsion (or disutility) effects (with the former showing significantly larger magnitude than the latter). The movement of crowd flows towards an invisible destination, however, is on average perceived as attraction (or utility) effect. Yet, further hypothesis testing showed that neither of those effects in isolation determines adequately whether an individual would merge with or diverge from the crowd. Rather, the social interaction factors act (at significant levels) in conjunction with the physical factors of the environments (including spatial distances to exit destinations and destinations' visibility). In brief, our finding disentangles the conditions under which individuals are more likely to show mass behaviour from the situations where they are more likely to break from the herd. It identifies two factors that moderate the perception of social interactions, ;crowds' jam/movement status; and ;environmental setup;. Our results particularly challenge the taxonomy of attraction-repulsion social interaction forces defined purely based on the distance of the individual to the surrounding crowd, by showing that crowds could be in far distance and yet be perceived as repulsion effect, or they could be in close distance and yet act as attraction effect.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ata, Metin; Baumgarten, Falk; Bautista, Julian

We present measurements of the Baryon Acoustic Oscillation (BAO) scale in redshift-space using the clustering of quasars. We consider a sample of 147,000 quasars from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) distributed over 2044 square degrees with redshiftsmore » $0.8 < z < 2.2$ and measure their spherically-averaged clustering in both configuration and Fourier space. Our observational dataset and the 1400 simulated realizations of the dataset allow us to detect a preference for BAO that is greater than 2.5$$\\sigma$$. We determine the spherically averaged BAO distance to $z = 1.52$ to 4.4 per cent precision: $$D_V(z=1.52)=3855\\pm170 \\left(r_{\\rm d}/r_{\\rm d, fid}\\right)\\ $$Mpc. This is the first time the location of the BAO feature has been measured between redshifts 1 and 2. Our result is fully consistent with the prediction obtained by extrapolating the Planck flat $$\\Lambda$$CDM best-fit cosmology. All of our results are consistent with basic large-scale structure (LSS) theory, confirming quasars to be a reliable tracer of LSS, and provide a starting point for numerous cosmological tests to be performed with eBOSS quasar samples. We combine our result with previous, independent, BAO distance measurements to construct an updated BAO distance-ladder. Using these BAO data alone and marginalizing over the length of the standard ruler, we find $$\\Omega_{\\Lambda} > 0$$ at 6.5$$\\sigma$$ significance when testing a $$\\Lambda$$CDM model with free curvature.« less

Functional Role of the Front and Back Legs During a Track Start with Special Reference to an Inverted Pendulum Model in College Swimmers.

PubMed

Ikeda, Yusuke; Ichikawa, Hiroshi; Nara, Rio; Baba, Yasuhiro; Shimoyama, Yoshimitsu; Kubo, Yasuyuki

2016-10-01

This study investigated factors that determine the velocity of the center of mass (CM) and flight distance from a track start to devise effective technical and physical training methods. Nine male and 5 female competitive swimmers participated in this study. Kinematics and ground reaction forces of the front and back legs were recorded using a video camera and force plates. The track start was modeled as an inverted pendulum system including a compliant leg, connecting the CM and front edge of the starting block. The increase in the horizontal velocity of the CM immediately after the start signal was closely correlated with the rotational component of the inverted pendulum. This rotational component at hands-off was significantly correlated with the average vertical force of the back plate from the start signal to hands-off (r = .967, P < .001). The flight distance / height was significantly correlated with the average vertical force of the front plate from the back foot-off to front foot-off (r = .783, P < .01). The results indicate that the legs on the starting block in the track start play a different role in the behavior of the inverted pendulum.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, P.C.; Gronenborn, A.M.; Beress, L.

The three-dimensional solution structure of the antihypertensive and antiviral protein BDS-I from the sea anemone Anemonia sulcata has been determined on the basis of 489 interproton and 24 hydrogen-bonding distance restraints supplemented by 23 {phi} backbone and 21 {sub {chi}1} side-chain torsion angle restraints derived from nuclear magnetic resonance (NMR) measurements. A total of 42 structures is calculated by a hybrid metric matrix distance geometry-dynamical simulated annealing approach. Both the backbone and side-chain atom positions are well defined. The average atomic rms difference between the 42 individual SA structures and the mean structure obtained by averaging their coordinates is 0.67more » {plus minus} 0.12 {angstrom} for the backbone atoms and 0.90 {plus minus} 0.17 {angstrom} for all atoms. The core of the protein is formed by a triple-stranded antiparallel {beta}-sheet composed of residues 14-16 (strand 1), 30-34 (strand 2), and 37-41 (strand 3) with an additional mini-antiparallel {beta}-sheet at the N-terminus (residues 6-9). The first and second strands of the triple-stranded antiparallel {beta}-sheet are connected by a long exposed loop. A number of side-chain interactions are discussed in light of the structure.« less

Correlations between U.S. county annual cancer incidence and population density.

PubMed

Vares, David Ae; St-Pierre, Linda S; Persinger, Michael A

2015-01-01

Population density implicitly involves specific distances between living individuals who exhibit biophysical forces and energies. Objective was to investigate major data bases of cancer incidence and population data to help understand the emergent properties of diseases that become apparent only when large populations and areas are considered. Correlation analyses of the annual incidence (years 2007 to 2011) of cancer in counties (2,885) of the U.S. and population densities were convergent with these quantitative predictions and suggested an inflection threshold around 50 people per square mile. The potential role of subtle or even "non-local" factors coupled to averaged population density in the viability and mortality of the human species may serve as alternative explanations to the attribution of malignancy to "chance" factors. Calculations indicated average distances between the electric force dipole of the brains or bodies of human beings generate forces known to affect DNA extension and when distributed over the Compton wavelength of the electron could produce energies sufficient to affect the binding of base nucleotides. An inclusive science of human ecology might benefit from considering subtle forces and energies associated with the individual members within the habitat that could determine the probability of cellular anomalies.

[Tracing Sources of Sulfate Aerosol in Nanjing Northern Suburb Using Sulfur and Oxygen Isotopes].

PubMed

Wei, Ying; Guo, Zhao-bing; Ge, Xin; Zhu, Sheng-nan; Jiang, Wen-juan; Shi, Lei; Chen, Shu

2015-04-01

Abstract: To trace the sources of sulfate contributing to atmospheric aerosol, PM2.5 samples for isotopic analysis were collected in Nanjing northern suburb during January 2014. The sulfur and oxygen isotopic compositions of sulfate from these samples were determined by EA-IRMS. Source identification and apportionment were carried out using stable isotopic and chemical evidences, combined with absolute principal component analysis (APCA) method. The Δ34S values of aerosol sulfate ranged from 2.7 per thousand to 6.4 per thousand, with an average of 5.0 per thousand ± 0.9 per thousand, while the Δ18O values ranged from 10.6 per thousand to 16.1 per thousand, with an average of 12.5 per thousand ± 1.37 per thousand. In conjunction with air mass trajectories, the results suggested that aerosol sulfates were controlled by a dominance of local anthropogenic sulfate, followed by the contributions of long-distance transported sulfate. There was a minor effect of some other low-Δ34S valued sulfates, which might be expected from biogenic sources. Absolute principal component analysis results showed that the contributions of anthropogenic sulfate and long-distance transported sulfate were 46.74% and 31.54%, respectively.

Central stars of planetary nebulae in the Galactic bulge

NASA Astrophysics Data System (ADS)

Hultzsch, P. J. N.; Puls, J.; Méndez, R. H.; Pauldrach, A. W. A.; Kudritzki, R.-P.; Hoffmann, T. L.; McCarthy, J. K.

2007-06-01

Context: Optical high-resolution spectra of five central stars of planetary nebulae (CSPN) in the Galactic bulge have been obtained with Keck/HIRES in order to derive their parameters. Since the distance of the objects is quite well known, such a method has the advantage that stellar luminosities and masses can in principle be determined without relying on theoretical relations between both quantities. Aims: By alternatively combining the results of our spectroscopic investigation with evolutionary tracks, we obtain so-called spectroscopic distances, which can be compared with the known (average) distance of the bulge-CSPN. This offers the possibility to test the validity of model atmospheres and present date post-AGB evolution. Methods: We analyze optical H/He profiles of five Galactic bulge CSPN (plus one comparison object) by means of profile fitting based on state of the art non-LTE modeling tools, to constrain their basic atmospheric parameters (Teff, log g, helium abundance and wind strength). Masses and other stellar radius dependent quantities are obtained from both the known distances and from evolutionary tracks, and the results from both approaches are compared. Results: The major result of the present investigation is that the derived spectroscopic distances depend crucially on the applied reddening law. Assuming either standard reddening or values based on radio-Hβ extinctions, we find a mean distance of 9.0±1.6 kpc and 12.2±2.1 kpc, respectively. An “average extinction law” leads to a distance of 10.7±1.2 kpc, which is still considerably larger than the Galactic center distance of 8 kpc. In all cases, however, we find a remarkable internal agreement of the individual spectroscopic distances of our sample objects, within ±10% to ±15% for the different reddening laws. Conclusions: Due to the uncertain reddening correction, the analysis presented here cannot yet be regarded as a consistency check for our method, and a rigorous test of the CSPN evolution theory becomes only possible if this problem has been solved. The data presented herein were obtained at the W. M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California and the National Aeronautics and Space Administration. The Observatory was made possible by the generous financial support of the W. M. Keck Foundation. Appendix A is only available in electronic form at http://www.aanda.org

[Spatial patterns and influence factors of specialization in tea cultivation based on geographically weighted regression model: A case study of Anxi County of Fujian Province, China].

PubMed

Shui, Wei; DU, Yong; Chen, Yi Ping; Jian, Xiao Mei; Fan, Bing Xiong

2017-04-18

Anxi County, specializing in tea cultivation, was taken as a case in this research. Pearson correlation analysis, ordinary least squares model (OLS) and geographically weighted regression model (GWR) were used to select four primary influence factors of specialization in tea cultivation (i.e., the average elevation, net income per capita, proportion of agricultural population, and the distance from roads) by analyzing the specialization degree of each town of Anxi County. Meanwhile, the spatial patterns of specialization in tea cultivation of Anxi County were evaluated. The results indicated that specialization in tea cultivation of Anxi County showed an obvious spatial auto-correlation, and a spatial pattern with "low-middle-high" circle structure, which was similar to Von Thünen's circle structure model, appeared from the county town to its surrounding region. Meanwhile, GWR (0.624) had a better fitting degree than OLS (0.595), and GWR could reasonably expound the spatial data. Contrary to the agricultural location theory of Von Thünen's model, which indicated that distance from market was a determination factor, the specialization degree of tea cultivation in Anxi was mainly decided by natural conditions of mountain area, instead of the social factors. Specialization degree of tea cultivation was positively correlated with the average elevation, net income per capita and the proportion of agricultural population, while a negative correlation was found between the distance from roads and specialization degree of tea cultivation. Coefficients of regression between the specialization degree of tea cultivation and two factors (i.e., the average elevation and net income per capita) showed a spatial pattern of higher level in the north direction and lower level in the south direction. On the contrary, the regression coefficients for the proportion of agricultural population increased from south to north of Anxi County. Furthermore, regression coefficient for the distance from roads showed a spatial pattern of higher level in the northeast direction and lower level in the southwest direction of Anxi County.

An Analysis and Procedure for Determining Space Environmental Sink Temperatures With Selected Computational Results

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.

2001-01-01

The purpose of this report was to analyze the heat-transfer problem posed by the determination of spacecraft temperatures and to incorporate the theoretically derived relationships in the computational code TSCALC. The basis for the code was a theoretical analysis of the thermal radiative equilibrium in space, particularly in the Solar System. Beginning with the solar luminosity, the code takes into account these key variables: (1) the spacecraft-to-Sun distance expressed in astronomical units (AU), where 1 AU represents the average Sun-to-Earth distance of 149.6 million km; (2) the angle (arc degrees) at which solar radiation is incident upon a spacecraft surface (ILUMANG); (3) the spacecraft surface temperature (a radiator or photovoltaic array) in kelvin, the surface absorptivity-to-emissivity ratio alpha/epsilon with respect to the solar radiation and (alpha/epsilon)(sub 2) with respect to planetary radiation; and (4) the surface view factor to space F. Outputs from the code have been used to determine environmental temperatures in various Earth orbits. The code was also utilized as a subprogram in the design of power system radiators for deep-space probes.

Retrospective Review of Air Transportation Use for Upper Extremity Amputations at a Level-1 Trauma Center.

PubMed

Grantham, W Jeffrey; To, Philip; Watson, Jeffry T; Brywczynski, Jeremy; Lee, Donald H

2016-08-01

Air transportation to tertiary care centers of patients with upper extremity amputations has been utilized in hopes of reducing the time to potential replantation; however, this mode of transportation is expensive and not all patients will undergo replantation. The purpose of this study is to review the appropriateness and cost of air transportation in upper extremity amputations. Consecutive patients transported by aircraft with upper extremity amputations in a 7-year period at a level-1 trauma center were retrospectively reviewed. The distance traveled was recorded, along with the times of the injury, referral, transportation duration, arrival, and start of the operation. The results of the transfer were defined as replantation or revision amputation. Overall, 47 patients were identified with 43 patients going to the operating room, but only 14 patients (30%) undergoing replantation. Patients arrived at the tertiary hand surgery center with a mean time of 182.3 minutes following the injury, which includes 105.2 minutes of transportation time. The average distance traveled was 105.4 miles (range, 22-353 miles). The time before surgery of those who underwent replantation was 154.6 minutes. The average cost of transportation was $20,482. Air transportation for isolated upper extremity amputations is costly and is not usually the determining factor for replantation. The type of injury and patients' expectations often dictate the outcome, and these may be better determined at the time of referral with use of telecommunication photos, discussion with a hand surgeon, and patient counseling. III.

Solution structure of the chick TGFbeta type II receptor ligand-binding domain.

PubMed

Marlow, Michael S; Brown, Christopher B; Barnett, Joey V; Krezel, Andrzej M

2003-02-28

The transforming growth factor beta (TGFbeta) signaling pathway influences cell proliferation, immune responses, and extracellular matrix reorganization throughout the vertebrate life cycle. The signaling cascade is initiated by ligand-binding to its cognate type II receptor. Here, we present the structure of the chick type II TGFbeta receptor determined by solution NMR methods. Distance and angular constraints were derived from 15N and 13C edited NMR experiments. Torsion angle dynamics was used throughout the structure calculations and refinement. The 20 final structures were energy minimized using the generalized Born solvent model. For these 20 structures, the average backbone root-mean-square distance from the average structure is below 0.6A. The overall fold of this 109-residue domain is conserved within the superfamily of these receptors. Chick receptors fully recognize and respond to human TGFbeta ligands despite only 60% identity at the sequence level. Comparison with the human TGFbeta receptor determined by X-ray crystallography reveals different conformations in several regions. Sequence divergence and crystal packing interactions under low pH conditions are likely causes. This solution structure identifies regions were structural changes, however subtle, may occur upon ligand-binding. We also identified two very well conserved molecular surfaces. One was found to bind ligand in the crystallized human TGFbeta3:TGFbeta type II receptor complex. The other, newly identified area can be the interaction site with type I and/or type III receptors of the TGFbeta signaling complex.

Genetic distance of Malaysian mousedeer based on mitochondrial DNA cytochrome oxidase I (COI) and D-loop region sequences

NASA Astrophysics Data System (ADS)

Bakar, Mohamad-Azam Akmal Abu; Rovie-Ryan, Jeffrine Japning; Ampeng, Ahmad; Yaakop, Salmah; Nor, Shukor Md; Md-Zain, Badrul Munir

2018-04-01

Mousedeer is one of the primitive mammals that can be found mainly in Southeast-Asia region. There are two species of mousedeer in Malaysia which are Tragulus kanchil and Tragulus napu. Both species can be distinguish by size, coat coloration, and throat pattern but clear diagnosis still cannot be found. The objective of the study is to show the genetic distance relationship between T. kanchil and T. napu and their population based on mitochondrial DNA (mtDNA) cytochrome oxidase I (COI) and D-loop region. There are 42 sample of mousedeer were used in this study collected by PERHILITAN from different locality. Another 29 D-loop sequence were retrieved from Genbank for comparative analysis. All sample were amplified using universal primer and species-specific primer for COI and D-loop genes via PCR process. The amplified sequences were analyzed to determine genetic distance of T. kanchil and T. napu. From the analysis, the average genetic distance between T. kanchil and T. napu based on locus COI and D-loop were 0.145 and 0.128 respectively. The genetic distance between populations of T. kanchil based on locus COI was between 0.003-0.013. For locus D-loop, genetic distance analysis showed distance in relationship between west-coast populations to east-coast population of T. kanchil. COI and D-loop mtDNA region provided a clear picture on the relationship within the mousedeer species. Last but not least, conservation effort toward protecting this species can be done by study the molecular genetics and prevent the extinction of this species.

Determination of molecular mass values of chondroitin sulfates by fluorophore-assisted carbohydrate electrophoresis (FACE).

PubMed

Buzzega, Dania; Maccari, Francesca; Volpi, Nicola

2010-03-11

Fluorophore-assisted carbohydrate electrophoresis (FACE) was applied to determine the molecular mass (M) values of various chondroitin sulfate (CS) samples. After labeling with 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS), FACE was able to resolve each CS sample as a discrete band depending on the M value. After densitometric acquisition, the migration distance of each CS standard was acquired and the third grade polynomial calibration standard curve was determined by plotting the logarithms of the M values as a function of migration ratio. Purified CS samples of different origin and the European Pharmacopeia CS standard were analyzed by both FACE and conventional high-performance size-exclusion liquid chromatography (HPSEC) methods. The molecular weight value on the top of the chromatographic peak (M(p)), the number-average M(n), weight-average M(w), and polydispersity (M(w)/M(n)) were examined by both techniques and found to be quite similar. This study demonstrates that FACE analysis is a suitable, sensitive and simple method for the determination of the M values of CS macromolecules with possible utilization in virtually any kind of research and development such as quality control laboratories. Copyright 2009 Elsevier B.V. All rights reserved.

The spatial distribution and temporal variation of desert riparian forests and their influencing factors in the downstream Heihe River basin, China

NASA Astrophysics Data System (ADS)

Ding, Jingyi; Zhao, Wenwu; Daryanto, Stefani; Wang, Lixin; Fan, Hao; Feng, Qiang; Wang, Yaping

2017-05-01

Desert riparian forests are the main restored vegetation community in Heihe River basin. They provide critical habitats and a variety of ecosystem services in this arid environment. Since desert riparian forests are also sensitive to disturbance, examining the spatial distribution and temporal variation of these forests and their influencing factors is important to determine the limiting factors of vegetation recovery after long-term restoration. In this study, field experiment and remote sensing data were used to determine the spatial distribution and temporal variation of desert riparian forests and their relationship with the environmental factors. We classified five types of vegetation communities at different distances from the river channel. Community coverage and diversity formed a bimodal pattern, peaking at the distances of 1000 and 3000 m from the river channel. In general, the temporal normalized difference vegetation index (NDVI) trend from 2000 to 2014 was positive at different distances from the river channel, except for the region closest to the river bank (i.e. within 500 m from the river channel), which had been undergoing degradation since 2011. The spatial distribution of desert riparian forests was mainly influenced by the spatial heterogeneity of soil properties (e.g. soil moisture, bulk density and soil particle composition). Meanwhile, while the temporal variation of vegetation was affected by both the spatial heterogeneity of soil properties (e.g. soil moisture and soil particle composition) and to a lesser extent, the temporal variation of water availability (e.g. annual average and variability of groundwater, soil moisture and runoff). Since surface (0-30 cm) and deep (100-200 cm) soil moisture, bulk density and the annual average of soil moisture at 100 cm obtained from the remote sensing data were regarded as major determining factors of community distribution and temporal variation, conservation measures that protect the soil structure and prevent soil moisture depletion (e.g. artificial soil cover and water conveyance channels) were suggested to better protect desert riparian forests under climate change and intensive human disturbance.

A virtual pebble game to ensemble average graph rigidity.

PubMed

González, Luis C; Wang, Hui; Livesay, Dennis R; Jacobs, Donald J

2015-01-01

The body-bar Pebble Game (PG) algorithm is commonly used to calculate network rigidity properties in proteins and polymeric materials. To account for fluctuating interactions such as hydrogen bonds, an ensemble of constraint topologies are sampled, and average network properties are obtained by averaging PG characterizations. At a simpler level of sophistication, Maxwell constraint counting (MCC) provides a rigorous lower bound for the number of internal degrees of freedom (DOF) within a body-bar network, and it is commonly employed to test if a molecular structure is globally under-constrained or over-constrained. MCC is a mean field approximation (MFA) that ignores spatial fluctuations of distance constraints by replacing the actual molecular structure by an effective medium that has distance constraints globally distributed with perfect uniform density. The Virtual Pebble Game (VPG) algorithm is a MFA that retains spatial inhomogeneity in the density of constraints on all length scales. Network fluctuations due to distance constraints that may be present or absent based on binary random dynamic variables are suppressed by replacing all possible constraint topology realizations with the probabilities that distance constraints are present. The VPG algorithm is isomorphic to the PG algorithm, where integers for counting "pebbles" placed on vertices or edges in the PG map to real numbers representing the probability to find a pebble. In the VPG, edges are assigned pebble capacities, and pebble movements become a continuous flow of probability within the network. Comparisons between the VPG and average PG results over a test set of proteins and disordered lattices demonstrate the VPG quantitatively estimates the ensemble average PG results well. The VPG performs about 20% faster than one PG, and it provides a pragmatic alternative to averaging PG rigidity characteristics over an ensemble of constraint topologies. The utility of the VPG falls in between the most accurate but slowest method of ensemble averaging over hundreds to thousands of independent PG runs, and the fastest but least accurate MCC.

Cognitive Style and Self-Efficacy: Predicting Student Success in Online Distance Education

ERIC Educational Resources Information Center

DeTure, Monica

2004-01-01

This study was designed to identify those learner attributes that may be used to predict student success (in terms of grade point average) in a Web-based distance education setting. Students enrolled in six Web-based, general education distance education courses at a community college were asked to complete the Group Embedded Figures Test for…

Functional connectivity and structural covariance between regions of interest can be measured more accurately using multivariate distance correlation.

PubMed

Geerligs, Linda; Cam-Can; Henson, Richard N

2016-07-15

Studies of brain-wide functional connectivity or structural covariance typically use measures like the Pearson correlation coefficient, applied to data that have been averaged across voxels within regions of interest (ROIs). However, averaging across voxels may result in biased connectivity estimates when there is inhomogeneity within those ROIs, e.g., sub-regions that exhibit different patterns of functional connectivity or structural covariance. Here, we propose a new measure based on "distance correlation"; a test of multivariate dependence of high dimensional vectors, which allows for both linear and non-linear dependencies. We used simulations to show how distance correlation out-performs Pearson correlation in the face of inhomogeneous ROIs. To evaluate this new measure on real data, we use resting-state fMRI scans and T1 structural scans from 2 sessions on each of 214 participants from the Cambridge Centre for Ageing & Neuroscience (Cam-CAN) project. Pearson correlation and distance correlation showed similar average connectivity patterns, for both functional connectivity and structural covariance. Nevertheless, distance correlation was shown to be 1) more reliable across sessions, 2) more similar across participants, and 3) more robust to different sets of ROIs. Moreover, we found that the similarity between functional connectivity and structural covariance estimates was higher for distance correlation compared to Pearson correlation. We also explored the relative effects of different preprocessing options and motion artefacts on functional connectivity. Because distance correlation is easy to implement and fast to compute, it is a promising alternative to Pearson correlations for investigating ROI-based brain-wide connectivity patterns, for functional as well as structural data. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Limb lengthening in Turner syndrome.

PubMed Central

Noonan, K. J.; Leyes, M.; Forriol, F.

1997-01-01

We report the results and complications of eight consecutive patients who underwent bilateral tibial lengthenings for dwarfism associated with Turner syndrome. Lengthening was performed via distraction osteogenesis with monolateral external fixation. Tibias were lengthened an average distance of 9.2 centimeters or 33 percent of the original tibial length. The average total treatment time was 268 days. The overall complication rate was 169 percent for each tibia lengthened and each segment required an average of 1.7 additional procedures. Seven cases (44 percent) required Achilles tendon lengthening and nine cases (56 percent) developed angulation before or after fixator removal; six of these segments required corrective osteotomy for axial malalignment. Two cases (12.5 percent) developed distraction site nonunion and required plating and bone grafting. From this series we conclude that tibial lengthening via distraction osteogenesis can be used to treat disproportionate short stature in patients with Turner syndrome. However, the benefit of a cosmetic increase in height may not compensate for the high complication rate. Efforts to determine the psychosocial and functional benefits of limb lengthening in patients with short stature is necessary to determine the true cost-benefit ratio of this procedure. Images Figure 1a Figure 1b Figure 1c PMID:9234980

Comparing self-reported burnout of pharmacy students on the founding campus with those at distance campuses.

PubMed

Ried, L Douglas; Motycka, Carol; Mobley, Cary; Meldrum, Michael

2006-10-15

To compare burnout among students: (1) assigned to the founding campus and those assigned to distance campuses and (2) in different academic years of the curriculum. The third objective was to determine the relative ability of each factor to predict burnout among pharmacy students. Students in Gainesville (founding campus) and the Jacksonville, Orlando, and St. Petersburg distance campuses were surveyed using the Maslach Burnout Inventory. Internet-based survey methods were used to evaluate the emotional exhaustion, personal accomplishment, and depersonalization domains. Students responded using a Likert-type scale (1 = do not feel this way to 7 = feel this extremely strongly). Among 18 items, 8 significant differences were revealed. Within the emotional exhaustion domain, Gainesville students responded that they were more likely to "feel fatigued in the morning" (p < 0.001), "burned out" (p = 0.001), "used up" (p = 0.02), "frustrated" (p = 0.02), and "emotionally drained" (p < 0.02) compared to the distance students. Gainesville students had the highest average score on the item "I feel as though I treat my student colleagues impersonally" (p = 0.02). Academic year was the best predictor of burnout. Campus assignment was significant for emotional exhaustion, with the highest levels occurring on the founding campus. With few exceptions, students at the founding campus in Gainesville reported more emotional burnout than students attending classes at the distance campuses.

Impact of an implanted neuroprosthesis on community ambulation in incomplete SCI.

PubMed

Lombardo, Lisa M; Kobetic, Rudolf; Pinault, Gilles; Foglyano, Kevin M; Bailey, Stephanie N; Selkirk, Stephen; Triolo, Ronald J

2018-03-01

Test the effect of a multi-joint control with implanted electrical stimulation on walking after spinal cord injury (SCI). Single subject research design with repeated measures. Hospital-based biomechanics laboratory and user assessment of community use. Female with C6 AIS C SCI 30 years post injury. Lower extremity muscle activation with an implanted pulse generator and gait training. Walking speed, maximum distance, oxygen consumption, upper extremity (UE) forces, kinematics and self-assessment of technology. Short distance walking speed at one-year follow up with or without stimulation was not significantly different from baseline. However, average walking speed was significantly faster (0.22 m/s) with stimulation over longer distances than volitional walking (0.12 m/s). In addition, there was a 413% increase in walking distance from 95 m volitionally to 488 m with stimulation while oxygen consumption and maximum upper extremity forces decreased by 22 and 16%, respectively. Stimulation also produced significant (P ≤ 0.001) improvements in peak hip and knee flexion, ankle angle at foot off and at mid-swing. An implanted neuroprosthesis enabled a subject with incomplete SCI to walk longer distances with improved hip and knee flexion and ankle dorsiflexion resulting in decreased oxygen consumption and UE support. Further research is required to determine the robustness, generalizability and functional implications of implanted neuroprostheses for community ambulation after incomplete SCI.

Molecular markers for establishing distinctness in vegetatively propagated crops: a case study in grapevine.

PubMed

Ibáñez, Javier; Vélez, M Dolores; de Andrés, M Teresa; Borrego, Joaquín

2009-11-01

Distinctness, uniformity and stability (DUS) testing of varieties is usually required to apply for Plant Breeders' Rights. This exam is currently carried out using morphological traits, where the establishment of distinctness through a minimum distance is the key issue. In this study, the possibility of using microsatellite markers for establishing the minimum distance in a vegetatively propagated crop (grapevine) has been evaluated. A collection of 991 accessions have been studied with nine microsatellite markers and pair-wise compared, and the highest intra-variety distance and the lowest inter-variety distance determined. The collection included 489 different genotypes, and synonyms and sports. Average values for number of alleles per locus (19), Polymorphic Information Content (0.764) and heterozygosities observed (0.773) and expected (0.785) indicated the high level of polymorphism existing in grapevine. The maximum intra-variety variability found was one allele between two accessions of the same variety, of a total of 3,171 pair-wise comparisons. The minimum inter-variety variability found was two alleles between two pairs of varieties, of a total of 119,316 pair-wise comparisons. In base to these results, the minimum distance required to set distinctness in grapevine with the nine microsatellite markers used could be established in two alleles. General rules for the use of the system as a support for establishing distinctness in vegetatively propagated crops are discussed.

NASA Astrophysics Data System (ADS)

2017-11-01

To deal with these problems investigators usually rely on a calibration method that makes use of a substance with an accurately known set of interatomic distances. The procedure consists of carrying out a diffraction experiment on the chosen calibrating substance, determining the value of the distances with use of the nominal (meter) value of the voltage, and then correcting the nominal voltage by an amount that produces the distances in the calibration substance. Examples of gases that have been used for calibration are carbon dioxide, carbon tetrachloride, carbon disulfide, and benzene; solids such as zinc oxide smoke (powder) deposited on a screen or slit have also been used. The question implied by the use of any standard molecule is, how accurate are the interatomic distance values assigned to the standard? For example, a solid calibrant is subject to heating by the electron beam, possibly producing unknown changes in the lattice constants, and polyatomic gaseous molecules require corrections for vibrational averaging ("shrinkage") effects that are uncertain at best. It has lately been necessary for us to investigate this matter in connection with on-going studies of several molecules in which size is the most important issue. These studies indicated that our usual method for retrieval of data captured on film needed improvement. The following is an account of these two issues - the accuracy of the distances assigned to the chosen standard molecule, and the improvements in our methods of retrieving the scattered intensity data.

Computerized image analysis of cell-cell interactions in human renal tissue by using multi-channel immunoflourescent confocal microscopy

NASA Astrophysics Data System (ADS)

Peng, Yahui; Jiang, Yulei; Liarski, Vladimir M.; Kaverina, Natalya; Clark, Marcus R.; Giger, Maryellen L.

2012-03-01

Analysis of interactions between B and T cells in tubulointerstitial inflammation is important for understanding human lupus nephritis. We developed a computer technique to perform this analysis, and compared it with manual analysis. Multi-channel immunoflourescent-microscopy images were acquired from 207 regions of interest in 40 renal tissue sections of 19 patients diagnosed with lupus nephritis. Fresh-frozen renal tissue sections were stained with combinations of immunoflourescent antibodies to membrane proteins and counter-stained with a cell nuclear marker. Manual delineation of the antibodies was considered as the reference standard. We first segmented cell nuclei and cell membrane markers, and then determined corresponding cell types based on the distances between cell nuclei and specific cell-membrane marker combinations. Subsequently, the distribution of the shortest distance from T cell nuclei to B cell nuclei was obtained and used as a surrogate indicator of cell-cell interactions. The computer and manual analyses results were concordant. The average absolute difference was 1.1+/-1.2% between the computer and manual analysis results in the number of cell-cell distances of 3 μm or less as a percentage of the total number of cell-cell distances. Our computerized analysis of cell-cell distances could be used as a surrogate for quantifying cell-cell interactions as either an automated and quantitative analysis or for independent confirmation of manual analysis.

Technique to determine location of radio sources from measurements taken on spinning spacecraft

NASA Technical Reports Server (NTRS)

Fainberg, J.

1979-01-01

The procedure developed to extract average source direction and average source size from spin-modulated radio astronomy data measured on the IMP-6 spacecraft is described. Because all measurements are used, rather than just finding maxima or minima in the data, the method is very sensitive, even in the presence of large amounts of noise. The technique is applicable to all experiments with directivity characteristics. It is suitable for onboard processing on satellites to reduce the data flow to Earth. The application to spin-modulated nonpolarized radio astronomy data is made and includes the effects of noise, background, and second source interference. The analysis was tested with computer simulated data and the results agree with analytic predictions. Applications of this method with IMP-6 radio data have led to: (1) determination of source positions of traveling solar radio bursts at large distances from the Sun; (2) mapping of magnetospheric radio emissions by radio triangulation; and (3) detection of low frequency radio emissions from Jupiter and Saturn.

Determinants of routine immunization costing in Benin and Ghana in 2011.

PubMed

Ahanhanzo, Césaire Damien; Huang, Xiao Xian; Le Gargasson, Jean-Bernard; Sossou, Justin; Nyonator, Frank; Colombini, Anais; Gessner, Bradford D

2015-05-07

Existing tools to evaluate costs do not always capture the heterogeneity of costs at the facility level. This study seeks to address this issue through an analysis of determinants of health facility immunization costs. A statistical analysis on facility routine delivery and vaccine costs was conducted using ordinary least squares regression. Explanatory variables included the number of doses administered; proportion of time spent by facility staff on immunization; average staff wage; whether the health facility had enough staff; presence of cold chain equipment; distance to a vaccine collection point; and, facility ownership. Data were drawn from representative samples of primary care facilities in Benin and Ghana (46 and 50 facilities, respectively) collected as part of the EPIC studies. Weighted average RI immunization facility cost was US$ 16,459 in Ghana and US$ 14,994 in Benin. The regression found total doses administered to be positively and significantly associated with facility cost in both countries. A 10% increase in doses resulted in a 4% increase in cost in Ghana, and a 7.5% increase in Benin. In Ghana, the proportion of immunization time, presence of cold chain, and sufficiency of staff were positively and significantly associated with total cost. In Benin, facility cost was negatively and significantly related to distance to the vaccine collection point. In the pooled sample, facilities in capital cities were associated with significantly higher costs. This study provides evidence on the importance of the level of scale in determining facility immunization cost, as well as the role of availability of health workers and time they spend on immunization in Ghana and Benin. This type of analysis can provide insights into the costs of scaling up immunization services, and can assist with development of more efficient immunization strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Identifying Canadian Freshwater Fishes through DNA Barcodes

PubMed Central

Hubert, Nicolas; Hanner, Robert; Holm, Erling; Mandrak, Nicholas E.; Taylor, Eric; Burridge, Mary; Watkinson, Douglas; Dumont, Pierre; Curry, Allen; Bentzen, Paul; Zhang, Junbin; April, Julien; Bernatchez, Louis

2008-01-01

Background DNA barcoding aims to provide an efficient method for species-level identifications using an array of species specific molecular tags derived from the 5′ region of the mitochondrial cytochrome c oxidase I (COI) gene. The efficiency of the method hinges on the degree of sequence divergence among species and species-level identifications are relatively straightforward when the average genetic distance among individuals within a species does not exceed the average genetic distance between sister species. Fishes constitute a highly diverse group of vertebrates that exhibit deep phenotypic changes during development. In this context, the identification of fish species is challenging and DNA barcoding provide new perspectives in ecology and systematics of fishes. Here we examined the degree to which DNA barcoding discriminate freshwater fish species from the well-known Canadian fauna, which currently encompasses nearly 200 species, some which are of high economic value like salmons and sturgeons. Methodology/Principal Findings We bi-directionally sequenced the standard 652 bp “barcode” region of COI for 1360 individuals belonging to 190 of the 203 Canadian freshwater fish species (95%). Most species were represented by multiple individuals (7.6 on average), the majority of which were retained as voucher specimens. The average genetic distance was 27 fold higher between species than within species, as K2P distance estimates averaged 8.3% among congeners and only 0.3% among concpecifics. However, shared polymorphism between sister-species was detected in 15 species (8% of the cases). The distribution of K2P distance between individuals and species overlapped and identifications were only possible to species group using DNA barcodes in these cases. Conversely, deep hidden genetic divergence was revealed within two species, suggesting the presence of cryptic species. Conclusions/Significance The present study evidenced that freshwater fish species can be efficiently identified through the use of DNA barcoding, especially the species complex of small-sized species, and that the present COI library can be used for subsequent applications in ecology and systematics. PMID:22423312

The Impact of Biomass Feedstock Supply Variability on the Delivered Price to a Biorefinery in the Peace River Region of Alberta, Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephen, Jamie; Sokhansanj, Shahabaddine; Bi, X.T.

2010-01-01

Agricultural residue feedstock availability in a given region can vary significantly over the 20 25 year lifetime of a biorefinery. Since delivered price of biomass feedstock to a biorefinery is related to the distance travelled and equipment optimization, and transportation distance increases as productivity decreases, productivity is a primary determinant of feedstock price. Using the Integrated Biomass Supply Analysis and Logistics (IBSAL) modeling environment and a standard round bale harvest and delivery scenario, harvest and delivery price were modelled for minimum, average, and maximum yields at four potential biorefinery sites in the Peace River region of Alberta, Canada. Biorefinery capacitiesmore » ranged from 50,000 to 500,000 tonnes per year. Delivery cost is a linear function of transportation distance and can be combined with a polynomial harvest function to create a generalized delivered cost function for agricultural residues. The range in delivered cost is substantial and is an important consideration for the operating costs of a biorefinery.« less

Comparison of daily and weekly precipitation sampling efficiencies using automatic collectors

USGS Publications Warehouse

Schroder, L.J.; Linthurst, R.A.; Ellson, J.E.; Vozzo, S.F.

1985-01-01

Precipitation samples were collected for approximately 90 daily and 50 weekly sampling periods at Finley Farm, near Raleigh, North Carolina from August 1981 through October 1982. Ten wet-deposition samplers (AEROCHEM METRICS MODEL 301) were used; 4 samplers were operated for daily sampling, and 6 samplers were operated for weekly-sampling periods. This design was used to determine if: (1) collection efficiences of precipitation are affected by small distances between the Universal (Belfort) precipitation gage and collector; (2) measurable evaporation loss occurs and (3) pH and specific conductance of precipitation vary significantly within small distances. Average collection efficiencies were 97% for weekly sampling periods compared with the rain gage. Collection efficiencies were examined by seasons and precipitation volume. Neither factor significantly affected collection efficiency. No evaporation loss was found by comparing daily sampling to weekly sampling at the collection site, which was classified as a subtropical climate. Correlation coefficients for pH and specific conductance of daily samples and weekly samples ranged from 0.83 to 0.99.Precipitation samples were collected for approximately 90 daily and 50 weekly sampling periods at Finley farm, near Raleigh, North Carolina from August 1981 through October 1982. Ten wet-deposition samplers were used; 4 samplers were operated for daily sampling, and 6 samplers were operated for weekly-sampling periods. This design was used to determine if: (1) collection efficiencies of precipitation are affected by small distances between the University (Belfort) precipitation gage and collector; (2) measurable evaporation loss occurs and (3) pH and specific conductance of precipitation vary significantly within small distances.

Spatial cues serving the tactile directional sensibility of the human forearm.

PubMed Central

Norrsell, U; Olausson, H

1994-01-01

1. Tactile directional sensibility is considered to rely on the parallel processing of direction-contingent sensory data that depend on skin stretching caused by friction, and spatial cues that vary with time. A temperature-controlled airstream stimulus that prevented the activation of stretch receptors was used to investigate directional sensibility for the skin of the forearm. 2. The dependence on contact load and distance of movement was determined for normal subjects with a two-alternative forced-choice method. Testing was performed under two conditions, elbow bent or straight. Bracing the skin by straightening the arm did not alter the accuracy of the directional sensibility, in contrast to previous findings with stimuli that caused friction. 3. The accuracy of directional sensibility was correlated linearly to the logarithm of the distance of movement of the air jet. No correlation was found between accuracy and contact load, unlike findings with stimuli that cause friction. 4. Measurements were made with different subjects to determine the threshold distance at constant load. On average, subjects were able to distinguish direction with movements of < or = 8 mm. This acuity is sharper than has been reported with static stimuli. There was no correlation between subjects' threshold distances for judging direction and spatial acuity measured with absolute point localization. 5. The ability to distinguish direction was poor for the airstream stimulus compared with stimuli causing frictional contact with hairy skin. Nevertheless, the present findings are consistent with the suggestion that cutaneous spatial acuity is better for dynamic than for static stimuli. Images Figure 1 PMID:7965863

Classic maximum entropy recovery of the average joint distribution of apparent FRET efficiency and fluorescence photons for single-molecule burst measurements.

PubMed

DeVore, Matthew S; Gull, Stephen F; Johnson, Carey K

2012-04-05

We describe a method for analysis of single-molecule Förster resonance energy transfer (FRET) burst measurements using classic maximum entropy. Classic maximum entropy determines the Bayesian inference for the joint probability describing the total fluorescence photons and the apparent FRET efficiency. The method was tested with simulated data and then with DNA labeled with fluorescent dyes. The most probable joint distribution can be marginalized to obtain both the overall distribution of fluorescence photons and the apparent FRET efficiency distribution. This method proves to be ideal for determining the distance distribution of FRET-labeled biomolecules, and it successfully predicts the shape of the recovered distributions.

Spectroscopic studies of the parameters of plasma jets during their propagation in the background plasma on the PF-3 facility

NASA Astrophysics Data System (ADS)

Dan'ko, S. A.; Ananyev, S. S.; Kalinin, Yu G.; Krauz, V. I.; Myalton, V. V.

2017-04-01

This paper presents measurement results of neon and helium plasma parameters in axial jets generated in plasma focus discharge. They were obtained in the course of experiments on laboratory modeling of astrophysical jets performed at the PF-3 facility. The plasma concentration was determined according to Stark broadening of spectral lines; the ionization temperature was determined by the average ion charge. The values of the concentration and temperature of jet plasma and background plasma at two distances from the pinch are also presented. In addition, an estimation was made of the heat content losses of the neon and helium jets during their movement through the surrounding medium.

Evaluation of proximity of mandibular molars and second premolar to inferior alveolar nerve canal among central Indians: A cone-beam computed tomographic retrospective study.

PubMed

Hiremath, Hemalatha; Agarwal, Rolly; Hiremath, Vishwanath; Phulambrikar, Tushar

2016-01-01

A study was done to assess the average distances of root apices of mandibular first molar, second molar, and second premolar to inferior alveolar nerve canal (IANC), among males and females in central India. High-resolution full-volume cone-beam computed tomography (CBCT) scans were obtained from the radiology database at the Sri Aurobindo College of Dentistry, Indore. After scrutinizing the database, CBCT of 40 males and 40 females that conformed to the inclusion and exclusion criteria were selected for the study. All the data were analyzed using SPSS, Version 16. Descriptive statistics of the variables and measurements are presented using Students t-test (paired and unpaired), and correlation between age was tabled by Karl Pearson's correlation coefficient method. For the second premolar, the average distance to the IANC was 0.88-13.03 mm for males and 0.00-5.49 mm for females. The average distance of IANC to the mesial root apex of first molar was 1.46-13.23 mm for males and 0.93-8.03 mm for females. For the second molar, the average distance was 1.31-14.71 mm for males and 0.00-6.91 mm for females (values on left side were shorter as compared to right side). In the overall population, only second molar exhibited significant difference in the distance from root apex to IANC when compared bilaterally. In addition to gender differences, age-related differences were found to be significant for the first molar on left side and second molar on the right side of the population (P< 0.05).

Spatial Temperature Mapping within Polymer Nanocomposites Undergoing Ultrafast Photothermal Heating via Gold Nanorods

PubMed Central

Maity, Somsubhra; Wu, Wei-Chen; Xu, Chao; Tracy, Joseph B.; Gundogdu, Kenan; Bochinski, Jason R.; Clarke, Laura I.

2015-01-01

Heat emanates from gold nanorods (GNRs) under ultrafast optical excitation of the localized surface plasmon resonance. The steady state nanoscale temperature distribution formed within a polymer matrix embedded with GNRs undergoing pulsed femtosecond photothermal heating is determined experimentally using two independent ensemble optical techniques. Physical rotation of the nanorods reveals the average local temperature of the polymer melt in the immediate spatial volume surrounding them while fluorescence of homogeneously-distributed perylene molecules monitors temperature over sample regions at larger distances from the GNRs. Polarization-sensitive fluorescence measurements of the perylene probes provide an estimate of the average size of the quasi-molten region surrounding each nanorod (that is, the boundary between softened polymer and solid material as the temperature decreases radially away from each particle) and distinguishes the steady state temperature in the solid and melt regions. Combining these separate methods enables nanoscale spatial mapping of the average steady state temperature distribution caused by ultrafast excitation of the GNRs. These observations definitively demonstrate the presence of a steady-state temperature gradient and indicate that localized heating via the photothermal effect within materials enables nanoscale thermal manipulations without significantly altering the bulk sample temperature in these systems. These quantitative results are further verified by reorienting nanorods within a solid polymer nanofiber without inducing any morphological changes to the highly temperature-sensitive nanofiber surface. Temperature differences of 70 – 90 °C were observed over a distances of ~100 nm. PMID:25379775

A Formula for Planning and Predicting Postoperative Mammoplasty Results.

PubMed

Smithson, Mary G; Collawn, Sherry S; Mousa, Mina S; Bramel, Carly M

2017-06-01

For women with macromastia, reduction mammoplasty is a safe and effective solution to increasing quality of life through alleviating pain and improving aesthetics. This study developed a way to combine a surgeon's view of breast measurement (volume) with a patient's view of breast measurement (distance between nipple and notch, inframammary fold, or midline) to provide patients with a better understanding of expected surgical outcomes after breast reduction with a medial superior pedicle. An institutional review board approved retrospective chart review was performed on all medial superior pedicle reduction mammoplasties performed by a single surgeon at a university medical center from 2008 to 2016, and a total of 133 patients were identified. Measurements of interest for this study were nipple to sternal notch (N-S), nipple to inframammary fold (N-I), nipple to midline (N-M), and breast diameter (BD). The average bilateral change per measurement was calculated for each patient in centimeters. Change was averaged for left and right breasts for N-S, N-I, N-M, and BD per patient. Grams removed for left and right breasts were also averaged. Each measurement of average change was divided by the gram average and multiplied by 100 to obtain centimeter change per 100 grams. Individual patient measurements per type of measurement were averaged to achieve a final improvement reported in centimeters per 100 g tissue removed per breast. The average change in the N-S distance was calculated to be a decrease of 1.5 ± 0.8 cm/100 g of breast tissue removed. The average change in N-I was calculated to be an overall decrease of 0.7 ± 0.5 cm/100 g. The average change in N-M was calculated to be a decrease of 0.1 ± 0.3 cm/100 g. Finally, the average change in BD was calculated to be 0.0 ± 0.4 cm/100 g. A surgeon's expression of breast measurements in terms of volume can be difficult for a patient to understand and visualize. This study determined the impact volume has on length of typical breast measurements to increase patients' understanding of expected outcomes. In summary, patients can be told to expect to see a nipple elevation of 1.5 cm per 100 grams of breast tissue removed using this medial superior pedicle technique.

SU-E-J-141: Assessment of the Magnitude and Impact of Trigger Delay in Respiratory Triggered Real-Time Imaging during Radiotherapy.

PubMed

Duan, J; Shen, S; Popple, R; Wu, X; Cardan, R; Brezovich, I

2012-06-01

To assess the trigger delay in respiratory triggered real-time imaging and its impact on image guided radiotherapy (IGRT) with Varian TrueBeam System. A sinusoidal motion phantom with 2cm motion amplitude was used. The trigger delay was determined directly with video image, and indirectly by the distance between expected and actual triggering phantom positions. For the direct method, a fluorescent screen was placed on the phantom to visualize the x-ray. The motion of the screen was recorded at 60 frames/second. The number of frames between the time when the phantom reached expected triggering position and the time when the screen was illuminated by the x-ray was used to determine the trigger delay. In the indirect method, triggered kV x-ray images were acquired in real-time during 'treatment' with triggers set at 25% and 75% respiratory phases where the phantom moved at the maximum speed. 39-40 triggered images were acquired continuously in each series. The distance between the expected and actual triggering points, d, was measured on the images to determine the delay time t by d=Asin(wt), where w=2π/T, T=period and A=amplitude. Motion periods of 2s and 4s were used in the measurement. The trigger delay time determined with direct video imaging was 125ms (7.5 video frames). The average distance between the expected and actual triggering positions determined by the indirect method was 3.93±0.74mm for T=4s and 7.02±1.25mm for T=2s, yielding mean trigger delay times of 126±24ms and 120±22ms, respectively. Although the mean over-travel distance is significant at 25% and 75% phases, clinically, the target over-travel resulted from the trigger delay at the end of expiration (50% phase) is negligibly small(< 0.5mm). The trigger delay in respiration-triggered imaging is in the range of 120-126ms. This delay has negligible clinical effect on gated IGRT. © 2012 American Association of Physicists in Medicine.

A cross-sectional study of differences in 6-min walk distance in healthy adults residing at high altitude versus sea level

PubMed Central

2014-01-01

Background We sought to determine if adult residents living at high altitude have developed sufficient adaptation to a hypoxic environment to match the functional capacity of a similar population at sea level. To test this hypothesis, we compared the 6-min walk test distance (6MWD) in 334 residents living at sea level vs. at high altitude. Methods We enrolled 168 healthy adults aged ≥35 years residing at sea level in Lima and 166 individuals residing at 3,825 m above sea level in Puno, Peru. Participants completed a 6-min walk test, answered a sociodemographics and clinical questionnaire, underwent spirometry, and a blood test. Results Average age was 54.0 vs. 53.8 years, 48% vs. 43% were male, average height was 155 vs. 158 cm, average blood oxygen saturation was 98% vs. 90%, and average resting heart rate was 67 vs. 72 beats/min in Lima vs. Puno. In multivariable regression, participants in Puno walked 47.6 m less (95% CI -81.7 to -13.6 m; p < 0.01) than those in Lima. Other variables besides age and height that were associated with 6MWD include change in heart rate (4.0 m per beats/min increase above resting heart rate; p < 0.001) and percent body fat (-1.4 m per % increase; p = 0.02). Conclusions The 6-min walk test predicted a lowered functional capacity among Andean high altitude vs. sea level natives at their altitude of residence, which could be explained by an incomplete adaptation or a protective mechanism favoring neuro- and cardioprotection over psychomotor activity. PMID:24484777

Estimation of Uncertainties in the Global Distance Test (GDT_TS) for CASP Models.

PubMed

Li, Wenlin; Schaeffer, R Dustin; Otwinowski, Zbyszek; Grishin, Nick V

2016-01-01

The Critical Assessment of techniques for protein Structure Prediction (or CASP) is a community-wide blind test experiment to reveal the best accomplishments of structure modeling. Assessors have been using the Global Distance Test (GDT_TS) measure to quantify prediction performance since CASP3 in 1998. However, identifying significant score differences between close models is difficult because of the lack of uncertainty estimations for this measure. Here, we utilized the atomic fluctuations caused by structure flexibility to estimate the uncertainty of GDT_TS scores. Structures determined by nuclear magnetic resonance are deposited as ensembles of alternative conformers that reflect the structural flexibility, whereas standard X-ray refinement produces the static structure averaged over time and space for the dynamic ensembles. To recapitulate the structural heterogeneous ensemble in the crystal lattice, we performed time-averaged refinement for X-ray datasets to generate structural ensembles for our GDT_TS uncertainty analysis. Using those generated ensembles, our study demonstrates that the time-averaged refinements produced structure ensembles with better agreement with the experimental datasets than the averaged X-ray structures with B-factors. The uncertainty of the GDT_TS scores, quantified by their standard deviations (SDs), increases for scores lower than 50 and 70, with maximum SDs of 0.3 and 1.23 for X-ray and NMR structures, respectively. We also applied our procedure to the high accuracy version of GDT-based score and produced similar results with slightly higher SDs. To facilitate score comparisons by the community, we developed a user-friendly web server that produces structure ensembles for NMR and X-ray structures and is accessible at http://prodata.swmed.edu/SEnCS. Our work helps to identify the significance of GDT_TS score differences, as well as to provide structure ensembles for estimating SDs of any scores.

The segmentation of bones in pelvic CT images based on extraction of key frames.

PubMed

Yu, Hui; Wang, Haijun; Shi, Yao; Xu, Ke; Yu, Xuyao; Cao, Yuzhen

2018-05-22

Bone segmentation is important in computed tomography (CT) imaging of the pelvis, which assists physicians in the early diagnosis of pelvic injury, in planning operations, and in evaluating the effects of surgical treatment. This study developed a new algorithm for the accurate, fast, and efficient segmentation of the pelvis. The proposed method consists of two main parts: the extraction of key frames and the segmentation of pelvic CT images. Key frames were extracted based on pixel difference, mutual information and normalized correlation coefficient. In the pelvis segmentation phase, skeleton extraction from CT images and a marker-based watershed algorithm were combined to segment the pelvis. To meet the requirements of clinical application, physician's judgment is needed. Therefore the proposed methodology is semi-automated. In this paper, 5 sets of CT data were used to test the overlapping area, and 15 CT images were used to determine the average deviation distance. The average overlapping area of the 5 sets was greater than 94%, and the minimum average deviation distance was approximately 0.58 pixels. In addition, the key frame extraction efficiency and the running time of the proposed method were evaluated on 20 sets of CT data. For each set, approximately 13% of the images were selected as key frames, and the average processing time was approximately 2 min (the time for manual marking was not included). The proposed method is able to achieve accurate, fast, and efficient segmentation of pelvic CT image sequences. Segmentation results not only provide an important reference for early diagnosis and decisions regarding surgical procedures, they also offer more accurate data for medical image registration, recognition and 3D reconstruction.

The clavicle hook plate for Neer type II lateral clavicle fractures.

PubMed

Renger, R J; Roukema, G R; Reurings, J C; Raams, P M; Font, J; Verleisdonk, E J M M

2009-09-01

To evaluate functional and radiologic outcome in patients with a Neer type II lateral clavicle fracture treated with the clavicle hook plate. Multicenter retrospective study. Five level I and II trauma centers. Forty-four patients, average age 38.4 years (18-66 years), with a Neer type II lateral clavicle fracture treated with the clavicle hook plate between January 1, 2003, and December 31, 2006. Open reduction and internal fixation with the clavicle hook plate. Removal of all 44 implants after consolidation at a mean of 8.4 months (2-33 months) postoperatively. At an average follow-up of 27.4 months (13-48 months), functional outcome was assessed with the Constant-Murley scoring system. Radiographs were taken to evaluate consolidation and to determine the distance between the coracoid process and the clavicle. The average Constant score was 92.4 (74-100). The average distance between the coracoid process and the clavicle was 9.8 mm (7.3-14.8 mm) compared with 9.4 mm (6.9-14.3 mm) on the contralateral nonoperative side. We observed 1 dislocation of an implant (2.2%), 2 cases of pseudarthrosis (4.5%), 2 superficial wound infections (4.5%), 2 patients with hypertrophic scar tissue (4.5%), and 3 times an acromial osteolysis (6.8%). Thirty patients (68%) reported discomfort due to the implant. These implant-related complaints and the acromial osteolysis disappeared after removal of the hook plate. With all the patients, direct functional aftercare was possible. The clavicle hook plate is a suitable implant for Neer type II clavicle fractures. The advantage of this osteosynthesis is the possibility of immediate functional aftercare. We observed a high percentage of discomfort due to the implant; therefore, we advise to remove the implant as soon as consolidation has taken place.

Evolutionary mixed games in structured populations: Cooperation and the benefits of heterogeneity

NASA Astrophysics Data System (ADS)

Amaral, Marco A.; Wardil, Lucas; Perc, Matjaž; da Silva, Jafferson K. L.

2016-04-01

Evolutionary games on networks traditionally involve the same game at each interaction. Here we depart from this assumption by considering mixed games, where the game played at each interaction is drawn uniformly at random from a set of two different games. While in well-mixed populations the random mixture of the two games is always equivalent to the average single game, in structured populations this is not always the case. We show that the outcome is, in fact, strongly dependent on the distance of separation of the two games in the parameter space. Effectively, this distance introduces payoff heterogeneity, and the average game is returned only if the heterogeneity is small. For higher levels of heterogeneity the distance to the average game grows, which often involves the promotion of cooperation. The presented results support preceding research that highlights the favorable role of heterogeneity regardless of its origin, and they also emphasize the importance of the population structure in amplifying facilitators of cooperation.

Evolutionary mixed games in structured populations: Cooperation and the benefits of heterogeneity.

PubMed

Amaral, Marco A; Wardil, Lucas; Perc, Matjaž; da Silva, Jafferson K L

2016-04-01

Evolutionary games on networks traditionally involve the same game at each interaction. Here we depart from this assumption by considering mixed games, where the game played at each interaction is drawn uniformly at random from a set of two different games. While in well-mixed populations the random mixture of the two games is always equivalent to the average single game, in structured populations this is not always the case. We show that the outcome is, in fact, strongly dependent on the distance of separation of the two games in the parameter space. Effectively, this distance introduces payoff heterogeneity, and the average game is returned only if the heterogeneity is small. For higher levels of heterogeneity the distance to the average game grows, which often involves the promotion of cooperation. The presented results support preceding research that highlights the favorable role of heterogeneity regardless of its origin, and they also emphasize the importance of the population structure in amplifying facilitators of cooperation.

Mercury accumulation in transplanted Hypogymnia physodes lichens downwind of Wisconsin chlor-alkali plant

USGS Publications Warehouse

Makholm, M.M.; Bennett, J.P.

1998-01-01

Emissions of mercury from a chlor-alkali plant in central Wisconsin have raised concern about possible effects on biota in the area. Samples of the lichen Hypogymnia physodes, which no longer grows in the area, were transplanted from a site in northeastern Wisconsin and positioned on plastic stands at varying distances up to 1250 m from the plant and sampled for Hg quarterly for one year to test the hypothesis that Hg would be taken up by the lichens and would decline with distance. Average tissue concentrations were elevated when first sampled at three months and continued to increase at the nearest sites until the study ended after one year. Average concentrations after a year of exposure ranged from 4418 ppb at 250 m from the plant to 403 ppb at 1250 m from the plant. The decrease over distance followed a negative exponential pattern. Background concentrations at a control site in northern Wisconsin averaged 155 ppb.

Heterodyne laser Doppler distance sensor with phase coding measuring stationary as well as laterally and axially moving objects

NASA Astrophysics Data System (ADS)

Pfister, T.; Günther, P.; Nöthen, M.; Czarske, J.

2010-02-01

Both in production engineering and process control, multidirectional displacements, deformations and vibrations of moving or rotating components have to be measured dynamically, contactlessly and with high precision. Optical sensors would be predestined for this task, but their measurement rate is often fundamentally limited. Furthermore, almost all conventional sensors measure only one measurand, i.e. either out-of-plane or in-plane distance or velocity. To solve this problem, we present a novel phase coded heterodyne laser Doppler distance sensor (PH-LDDS), which is able to determine out-of-plane (axial) position and in-plane (lateral) velocity of rough solid-state objects simultaneously and independently with a single sensor. Due to the applied heterodyne technique, stationary or purely axially moving objects can also be measured. In addition, it is shown theoretically as well as experimentally that this sensor offers concurrently high temporal resolution and high position resolution since its position uncertainty is in principle independent of the lateral object velocity in contrast to conventional distance sensors. This is a unique feature of the PH-LDDS enabling precise and dynamic position and shape measurements also of fast moving objects. With an optimized sensor setup, an average position resolution of 240 nm was obtained.

Experimental and Analytical Determination of the Geometric Far Field for Round Jets

NASA Technical Reports Server (NTRS)

Koch, L. Danielle; Bridges, James E.; Brown, Clifford E.; Khavaran, Abbas

2005-01-01

An investigation was conducted at the NASA Glenn Research Center using a set of three round jets operating under unheated subsonic conditions to address the question: "How close is too close?" Although sound sources are distributed at various distances throughout a jet plume downstream of the nozzle exit, at great distances from the nozzle the sound will appear to emanate from a point and the inverse-square law can be properly applied. Examination of normalized sound spectra at different distances from a jet, from experiments and from computational tools, established the required minimum distance for valid far-field measurements of the sound from subsonic round jets. Experimental data were acquired in the Aeroacoustic Propulsion Laboratory at the NASA Glenn Research Center. The WIND computer program solved the Reynolds-Averaged Navier-Stokes equations for aerodynamic computations; the MGBK jet-noise prediction computer code was used to predict the sound pressure levels. Results from both the experiments and the analytical exercises indicated that while the shortest measurement arc (with radius approximately 8 nozzle diameters) was already in the geometric far field for high-frequency sound (Strouhal number >5), low-frequency sound (Strouhal number <0.2) reached the geometric far field at a measurement radius of at least 50 nozzle diameters because of its extended source distribution.

Detectable changes in physical performance measures in elderly African Americans.

PubMed

Mangione, Kathleen Kline; Craik, Rebecca L; McCormick, Alyson A; Blevins, Heather L; White, Meaghan B; Sullivan-Marx, Eileen M; Tomlinson, James D

2010-06-01

African American older adults have higher rates of self-reported disability and lower physical performance scores compared with white older adults. Measures of physical performance are used to predict future morbidity and to determine the effect of exercise. Characteristics of performance measures are not known for African American older adults. The purpose of this study was to estimate the standard error of measurement (SEM) and minimal detectable change (MDC) for the Short Physical Performance Battery (SPPB), Timed "Up & Go" Test (TUG) time, free gait speed, fast gait speed, and Six-Minute Walk Test (6MWT) distance in frail African American adults. This observational measurement study used a test-retest design. Individuals were tested 2 times over a 1-week period. Demographic data collected included height, weight, number of medications, assistive device use, and Mini-Mental Status Examination (MMSE) scores. Participants then completed the 5 physical performance tests. Fifty-two participants (mean age=78 years) completed the study. The average MMSE score was 25 points, and the average body mass index was 29.4 kg/m(2). On average, participants took 7 medications, and the majority used assistive devices. Intraclass correlation coefficients (ICC [2,1]) were greater than .90, except for the SPPB score (ICC=.81). The SEMs were 1.2 points for the SPPB, 1.7 seconds for the TUG, 0.08 m/s for free gait speed, 0.09 m/s for fast gait speed, and 28 m for 6MWT distance. The MDC values were 2.9 points for the SPPB, 4 seconds for the TUG, 0.19 m/s for free gait speed, 0.21 m/s for fast gait speed, and 65 m for 6MWT distance. The entire sample was from an urban area. The SEMs were similar to previously reported values and can be used when working with African American and white older adults. Estimates of MDC were calculated to assist in clinical interpretation.

Ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5%-damped PSA at spectral periods between 0.01 s and 10.0 s

USGS Publications Warehouse

Boore, D.M.; Atkinson, G.M.

2008-01-01

This paper contains ground-motion prediction equations (GMPEs) for average horizontal-component ground motions as a function of earthquake magnitude, distance from source to site, local average shear-wave velocity, and fault type. Our equations are for peak ground acceleration (PGA), peak ground velocity (PGV), and 5%-damped pseudo-absolute-acceleration spectra (PSA) at periods between 0.01 s and 10 s. They were derived by empirical regression of an extensive strong-motion database compiled by the 'PEER NGA' (Pacific Earthquake Engineering Research Center's Next Generation Attenuation) project. For periods less than 1 s, the analysis used 1,574 records from 58 mainshocks in the distance range from 0 km to 400 km (the number of available data decreased as period increased). The primary predictor variables are moment magnitude (M), closest horizontal distance to the surface projection of the fault plane (RJB), and the time-averaged shear-wave velocity from the surface to 30 m (VS30). The equations are applicable for M=5-8, RJB<200 km, and VS30= 180-1300 m/s. ?? 2008, Earthquake Engineering Research Institute.

Does player unavailability affect football teams' match physical outputs? A two-season study of the UEFA champions league.

PubMed

Windt, Johann; Ekstrand, Jan; Khan, Karim M; McCall, Alan; Zumbo, Bruno D

2018-05-01

Player unavailability negatively affects team performance in elite football. However, whether player unavailability and its concomitant performance decrement is mediated by any changes in teams' match physical outputs is unknown. We examined whether the number of players injured (i.e. unavailable for match selection) was associated with any changes in teams' physical outputs. Prospective cohort study. Between-team variation was calculated by correlating average team availability with average physical outputs. Within-team variation was quantified using linear mixed modelling, using physical outputs - total distance, sprint count (efforts over 20km/h), and percent of distance covered at high speeds (>14km/h) - as outcome variables, and player unavailability as the independent variable of interest. To control for other factors that may influence match physical outputs, stage (group stage/knockout), venue (home/away), score differential, ball possession (%), team ranking (UEFA Club Coefficient), and average team age were all included as covariates. Teams' average player unavailability was positively associated with the average number of sprints they performed in matches across two seasons. Multilevel models similarly demonstrated that having 4 unavailable players was associated with 20.8 more sprints during matches in 2015/2016, and with an estimated 0.60-0.77% increase in the proportion of total distance run above 14km/h in both seasons. Player unavailability had a possibly positive and likely positive association with total match distances in the two respective seasons. Having more players injured and unavailable for match selection was associated with an increase in teams' match physical outputs. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Appropriate location of the nipple-areola complex in males.

PubMed

Shulman, O; Badani, E; Wolf, Y; Hauben, D J

2001-08-01

Gynecomastia is a common deformity encountered by plastic surgeons. The appropriate location of the nipple-areola complex is a major determinant of the aesthetic success of the procedure. To study the natural location of the nipple-areola complex in the normally built male, 50 nonobese men with no evidence of gynecomastia and an average age of 27.9 years were examined. Three ratios were calculated and found to be relatively constant; they were the ratio between the height of the nipple and the height of the patient, the ratio between the distance between the nipples and chest circumference, and the ratio between the suprasternal notch-to-nipple distance and the height of the patient. Using these three parameters, a method of locating the nipple-areola complex on the male chest wall was devised. The method is advocated as a reliable, simple, and useful technique.

Launch pad lightning protection effectiveness

NASA Technical Reports Server (NTRS)

Stahmann, James R.

1991-01-01

Using the striking distance theory that lightning leaders will strike the nearest grounded point on their last jump to earth corresponding to the striking distance, the probability of striking a point on a structure in the presence of other points can be estimated. The lightning strokes are divided into deciles having an average peak current and striking distance. The striking distances are used as radii from the points to generate windows of approach through which the leader must pass to reach a designated point. The projections of the windows on a horizontal plane as they are rotated through all possible angles of approach define an area that can be multiplied by the decile stroke density to arrive at the probability of strokes with the window average striking distance. The sum of all decile probabilities gives the cumulative probability for all strokes. The techniques can be applied to NASA-Kennedy launch pad structures to estimate the lightning protection effectiveness for the crane, gaseous oxygen vent arm, and other points. Streamers from sharp points on the structure provide protection for surfaces having large radii of curvature. The effects of nearby structures can also be estimated.

Probing the probe: AFM tip-profiling via nanotemplates to determine Hamaker constants from phase-distance curves.

PubMed

Rodriguez, Raul D; Lacaze, Emmanuelle; Jupille, Jacques

2012-10-01

A method to determine the van der Waals forces from phase-distance curves recorded by atomic force microscopy (AFM) in tapping mode is presented. The relationship between the phase shift and the tip-sample distance is expressed as a function of the product of the Hamaker constant by tip radius. Silica-covered silicon tips are used to probe silica-covered silicon substrate in dry conditions to avoid capillary effects. Tips being assumed spherical, radii are determined in situ by averaging profiles recorded in different directions on hematite nanocrystals acting as nanotemplates, thus accounting for tip anisotropy. Through a series of reproducible measurements performed with tips of various radii (including the in-situ characterization of a damaged tip), a value of (6.3±0.4)×10(-20) J is found for the Hamaker constant of interacting silica surfaces in air, in good agreement with tabulated data. The results demonstrate that the onset of the tip-surface interaction is dominated by the van der Waals forces and that the total force can be modeled in the framework of the harmonic approximation. Based on the tip radius and the Hamaker constant associated to the tip-substrate system, the model is quite flexible. Once the Hamaker constant is known, a direct estimate of the tip size can be achieved whereas when the tip size is known, a quantitative evaluation of the van der Waals force becomes possible on different substrates with a spatial resolution at the nanoscale. Copyright © 2012 Elsevier B.V. All rights reserved.

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: First measurement of Baryon Acoustic Oscillations between redshift 0.8 and 2.2

DOE PAGES

Ata, Metin

2017-06-20

Here, we present measurements of the Baryon Acoustic Oscillation (BAO) scale in redshift-space using the clustering of quasars. We consider a sample of 147,000 quasars from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) distributed over 2044 square degrees with redshifts 0.8 < z < 2.2 and measure their spherically-averaged clustering in both configuration and Fourier space. Our observational dataset and the 1400 simulated realizations of the dataset allow us to detect a preference for BAO that is greater than 2.5σ . We determine the spherically averaged BAO distance to z = 1.52 to 4.4 per cent precision: D V (zmore » = 1:52) = 3855 170 (r d/r d,fid) Mpc. This is the first time the location of the BAO feature has been measured between redshifts 1 and 2. Our result is fully consistent with the prediction obtained by extrapolating the Planck flat CDM best-fit cosmology. All of our results are consistent with basic large-scale structure (LSS) theory, confirming quasars to be a reliable tracer of LSS, and provide a starting point for numerous cosmological tests to be performed with eBOSS quasar samples. We combine our result with previous, independent, BAO distance measurements to construct an updated BAO distance-ladder. Bu using these BAO data alone and marginalizing over the length of the standard ruler, we find Ω Λ > 0 at 6.5σ significance when testing a CDM model with free curvature.« less

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: First measurement of Baryon Acoustic Oscillations between redshift 0.8 and 2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ata, Metin

Here, we present measurements of the Baryon Acoustic Oscillation (BAO) scale in redshift-space using the clustering of quasars. We consider a sample of 147,000 quasars from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) distributed over 2044 square degrees with redshifts 0.8 < z < 2.2 and measure their spherically-averaged clustering in both configuration and Fourier space. Our observational dataset and the 1400 simulated realizations of the dataset allow us to detect a preference for BAO that is greater than 2.5σ . We determine the spherically averaged BAO distance to z = 1.52 to 4.4 per cent precision: D V (zmore » = 1:52) = 3855 170 (r d/r d,fid) Mpc. This is the first time the location of the BAO feature has been measured between redshifts 1 and 2. Our result is fully consistent with the prediction obtained by extrapolating the Planck flat CDM best-fit cosmology. All of our results are consistent with basic large-scale structure (LSS) theory, confirming quasars to be a reliable tracer of LSS, and provide a starting point for numerous cosmological tests to be performed with eBOSS quasar samples. We combine our result with previous, independent, BAO distance measurements to construct an updated BAO distance-ladder. Bu using these BAO data alone and marginalizing over the length of the standard ruler, we find Ω Λ > 0 at 6.5σ significance when testing a CDM model with free curvature.« less

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: first measurement of baryon acoustic oscillations between redshift 0.8 and 2.2

NASA Astrophysics Data System (ADS)

Ata, Metin; Baumgarten, Falk; Bautista, Julian; Beutler, Florian; Bizyaev, Dmitry; Blanton, Michael R.; Blazek, Jonathan A.; Bolton, Adam S.; Brinkmann, Jonathan; Brownstein, Joel R.; Burtin, Etienne; Chuang, Chia-Hsun; Comparat, Johan; Dawson, Kyle S.; de la Macorra, Axel; Du, Wei; du Mas des Bourboux, Hélion; Eisenstein, Daniel J.; Gil-Marín, Héctor; Grabowski, Katie; Guy, Julien; Hand, Nick; Ho, Shirley; Hutchinson, Timothy A.; Ivanov, Mikhail M.; Kitaura, Francisco-Shu; Kneib, Jean-Paul; Laurent, Pierre; Le Goff, Jean-Marc; McEwen, Joseph E.; Mueller, Eva-Maria; Myers, Adam D.; Newman, Jeffrey A.; Palanque-Delabrouille, Nathalie; Pan, Kaike; Pâris, Isabelle; Pellejero-Ibanez, Marcos; Percival, Will J.; Petitjean, Patrick; Prada, Francisco; Prakash, Abhishek; Rodríguez-Torres, Sergio A.; Ross, Ashley J.; Rossi, Graziano; Ruggeri, Rossana; Sánchez, Ariel G.; Satpathy, Siddharth; Schlegel, David J.; Schneider, Donald P.; Seo, Hee-Jong; Slosar, Anže; Streblyanska, Alina; Tinker, Jeremy L.; Tojeiro, Rita; Vargas Magaña, Mariana; Vivek, M.; Wang, Yuting; Yèche, Christophe; Yu, Liang; Zarrouk, Pauline; Zhao, Cheng; Zhao, Gong-Bo; Zhu, Fangzhou

2018-02-01

We present measurements of the Baryon Acoustic Oscillation (BAO) scale in redshift-space using the clustering of quasars. We consider a sample of 147 000 quasars from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) distributed over 2044 square degrees with redshifts 0.8 < z < 2.2 and measure their spherically averaged clustering in both configuration and Fourier space. Our observational data set and the 1400 simulated realizations of the data set allow us to detect a preference for BAO that is greater than 2.8σ. We determine the spherically averaged BAO distance to z = 1.52 to 3.8 per cent precision: DV(z = 1.52) = 3843 ± 147(rd/rd, fid)Mpc. This is the first time the location of the BAO feature has been measured between redshifts 1 and 2. Our result is fully consistent with the prediction obtained by extrapolating the Planck flat ΛCDM best-fitting cosmology. All of our results are consistent with basic large-scale structure (LSS) theory, confirming quasars to be a reliable tracer of LSS, and provide a starting point for numerous cosmological tests to be performed with eBOSS quasar samples. We combine our result with previous, independent, BAO distance measurements to construct an updated BAO distance-ladder. Using these BAO data alone and marginalizing over the length of the standard ruler, we find ΩΛ > 0 at 6.6σ significance when testing a ΛCDM model with free curvature.

In-situ position and vibration measurement of rough surfaces using laser Doppler distance sensors

NASA Astrophysics Data System (ADS)

Czarske, J.; Pfister, T.; Günther, P.; Büttner, L.

2009-06-01

In-situ measurement of distances and shapes as well as dynamic deformations and vibrations of fast moving and especially rotating objects, such as gear shafts and turbine blades, is an important task at process control. We recently developed a laser Doppler distance frequency sensor, employing two superposed fan-shaped interference fringe systems with contrary fringe spacing gradients. Via two Doppler frequency evaluations the non-incremental position (i.e. distance) and the tangential velocity of rotating bodies are determined simultaneously. The distance uncertainty is in contrast to e.g. triangulation in principle independent of the object velocity. This unique feature allows micrometer resolutions of fast moved rough surfaces. The novel sensor was applied at turbo machines in order to control the tip clearance. The measurements at a transonic centrifugal compressor were performed during operation at up to 50,000 rpm, i.e. 586 m/s velocity of the blade tips. Due to the operational conditions such as temperatures of up to 300 °C, a flexible and robust measurement system with a passive fiber-coupled sensor, using diffractive optics, has been realized. Since the tip clearance of individual blades could be temporally resolved an analysis of blade vibrations was possible. A Fourier transformation of the blade distances results in an average period of 3 revolutions corresponding to a frequency of 1/3 of the rotary frequency. Additionally, a laser Doppler distance sensor using two tilted fringe systems and phase evaluation will be presented. This phase sensor exhibits a minimum position resolution of σz = 140 nm. It allows precise in-situ shape measurements at grinding and turning processes.

Association between breastfeeding duration, non-nutritive sucking habits and dental arch dimensions in deciduous dentition: a cross-sectional study.

PubMed

Agarwal, Shiv Shankar; Nehra, Karan; Sharma, Mohit; Jayan, Balakrishna; Poonia, Anish; Bhattal, Hiteshwar

2014-10-31

This cross-sectional retrospective study was conducted to determine association between breastfeeding duration, non-nutritive sucking habits, dental arch transverse diameters, posterior crossbite and anterior open bite in deciduous dentition. 415 children (228 males and 187 females), 4 to 6 years old, from a mixed Indian population were clinically examined. Based on written questionnaire answered by parents, children were divided into two groups: group 1 (breastfed for <6 months (n = 158)) and group 2 (breastfed for ≥6 months (n = 257)). The associations were analysed using chi-square test (P < 0.05 taken as statistically significant). Odds ratio (OR) was calculated to determine the strength of associations tested. Multivariate logistic regression analysis was done for obtaining independent predictors of posterior crossbite and maxillary and mandibular IMD (Inter-molar distance) and ICD (Inter-canine distance). Non-nutritive sucking (NNS) was present in 15.18% children (20.3% in group 1 as compared to 12.1% in group 2 (P = 0.024)). The average ICD and IMD in maxilla and average IMD in mandible were significantly higher among group 2 as compared to group 1 (P < 0.01). In mandible, average ICD did not differ significantly between the two groups (P = 0.342). The distribution of anterior open bite did not differ significantly between the two groups (P = 0.865). The distribution of posterior crossbite was significantly different between the two groups (P = 0.001). OR assessment (OR = 1.852) revealed that group 1 had almost twofold higher prevalence of NNS habits than group 2. Multivariate logistic regression analysis revealed that the first group had independently fourfold increased risk of developing crossbite compared to the second group (OR = 4.3). Multivariate linear regression analysis also revealed that age and breastfeeding duration were the most significant determinants of ICD and IMD. An increased prevalence of NNS in the first group suggests that NNS is a dominant variable in the association between breastfeeding duration and reduced intra-arch transverse diameters which leads to increased prevalence of posterior crossbites as seen in our study. Mandibular inter-canine width is however unaffected due to a lowered tongue posture seen in these children.

Theoretical analysis of nonnuniform skin effects on drawdown variation

NASA Astrophysics Data System (ADS)

Chen, C.-S.; Chang, C. C.; Lee, M. S.

2003-04-01

Under field conditions, the skin zone surrounding the well screen is rarely uniformly distributed in the vertical direction. To understand such non-uniform skin effects on drawdown variation, we assume the skin factor to be an arbitrary, continuous or piece-wise continuous function S_k(z), and incorporate it into a well hydraulics model for constant rate pumping in a homogeneous, vertically anisotropic, confined aquifer. Solutions of depth-specific drawdown and vertical average drawdown are determined by using the Gram-Schmidt method. The non-uniform effects of S_k(z) in vertical average drawdown are averaged out, and can be represented by a constant skin factor S_k. As a result, drawdown of fully penetrating observation wells can be analyzed by appropriate well hydraulics theories assuming a constant skin factor. The S_k is the vertical average value of S_k(z) weighted by the well bore flux q_w(z). In depth-specific drawdown, however, the non-uniform effects of S_k(z) vary with radial and vertical distances, which are under the influence of the vertical profile of S_k(z) and the vertical anisotropy ratio, K_r/K_z. Therefore, drawdown of partially penetrating observation wells may reflect the vertical anisotropy as well as the non-uniformity of the skin zone. The method of determining S_k(z) developed herein involves the use of q_w(z) as can be measured with the borehole flowmeter, and K_r/K_z and S_k as can be determined by the conventional pumping test.

Seed dispersal at alpine treeline: long distance dispersal maintains alpine treelines

NASA Astrophysics Data System (ADS)

Johnson, J. S.; Gaddis, K. D.; Cairns, D. M.; Krutovsky, K.

2016-12-01

Alpine treelines are expected to advance to higher elevations in conjunction with global warming. Nevertheless, the importance of reproductive method and seed dispersal distances at the alpine treeline ecotone remains unresolved. We address two research questions at mountain hemlock treelines on the Kenai Peninsula, Alaska: (1) What is the primary mode of reproduction, and (2) are recruits derived from local treeline populations or are they arriving from more distant seed sources? We addressed our research questions by exhaustively sampling mountain hemlock individuals along a single mountain slope and then genotyped DNA single nucleotide polymorphisms using a genotyping by sequencing approach (ddRAD Seq). First we assessed mode of reproduction by determining the proportion of sampled individuals with identical multilocus genotypes that are the product of clonal reproduction. Second, we used a categorical allocation based parentage analysis to identify parent-offspring pairs, so that the proportion of treeline reproduction events could be quantified spatially and dispersal distance measured. We identified sexual reproduction as the primary mode of reproduction at our study site. Seedling establishment was characterized by extensive cryptic seed dispersal and gene flow into the ecotone. The average dispersal distance was 73 meters with long distance dispersal identified as dispersal occurring at distances greater than 450 meters. We show that production of seeds within the alpine treeline ecotone is not a necessary requirement for treelines to advance to higher elevations in response to climate change. The extensive cryptic seed dispersal and gene flow into the alpine treeline ecotone is likely sufficient to propel the ecotone higher under more favorable climate.

Urogenital schistosomiasis transmission on Unguja Island, Zanzibar: characterisation of persistent hot-spots.

PubMed

Pennance, Tom; Person, Bobbie; Muhsin, Mtumweni Ali; Khamis, Alipo Naim; Muhsin, Juma; Khamis, Iddi Simba; Mohammed, Khalfan Abdallah; Kabole, Fatma; Rollinson, David; Knopp, Stefanie

2016-12-16

Elimination of urogenital schistosomiasis transmission is a priority for the Zanzibar Ministry of Health. Preventative chemotherapy together with additional control interventions have successfully alleviated much of the disease burden. However, a persistently high Schistosoma haematobium prevalence is found in certain areas. Our aim was to characterise and evaluate these persistent "hot-spots" of transmission and reinfection in comparison with low-prevalence areas, to support the intervention planning for schistosomiasis elimination in Zanzibar. Prevalences of S. haematobium were annually determined by a single urine filtration in schoolchildren from 45 administrative areas (shehias) in Unguja in 2012, 2013 and 2014. Coverage data for biannual treatment with praziquantel were available from ministerial databases and internal surveys. Among the 45 shehias, five hot-spot (≥ 15 % prevalence) and two low-prevalence (≤ 5 %) shehias were identified and surveyed in mid-2014. Human-water contact sites (HWCSs) and the presence of S. haematobium-infected and uninfected Bulinus globosus, as well as safe water sources (SWSs) and their reliability in terms of water availability were determined and mapped. We found no major difference in the treatment coverage between persistent hot-spot and low-prevalence shehias. On average, there were considerably more HWCSs containing B. globosus in hot-spot than in low-prevalence shehias (n = 8 vs n = 2) and also more HWCSs containing infected B. globosus (n = 2 vs n = 0). There was no striking difference in the average abundance of SWSs in hot-spot and low-prevalence shehias (n = 45 vs n = 38) and also no difference when considering SWSs with a constant water supply (average: 62 % vs 62 %). The average number of taps with a constant water supply, however, was lower in hot-spot shehias (n = 7 vs n = 14). Average distances from schools to the nearest HWCS were considerably shorter in hot-spot shehias (n = 229 m vs n = 722 m). The number of HWCSs, their infestation with B. globosus and their distance to schools seem to play a major role for a persistently high S. haematobium prevalence in children. In addition to treatment, increasing access to reliably working taps, targeted snail control at HWCSs near schools and enhanced behaviour change measures are needed to reduce prevalences in hot-spot areas and to finally reach elimination. ISRCTN48837681 .

Diffusion of microspheres in shear flow near a wall: use to measure binding rates between attached molecules.

PubMed Central

Pierres, A; Benoliel, A M; Zhu, C; Bongrand, P

2001-01-01

The rate and distance-dependence of association between surface-attached molecules may be determined by monitoring the motion of receptor-bearing spheres along ligand-coated surfaces in a flow chamber (Pierres et al., Proc. Natl. Acad. Sci. U.S.A. 95:9256-9261, 1998). Particle arrests reveal bond formation, and the particle-to-surface distance may be estimated from the ratio between the velocity and the wall shear rate. However, several problems are raised. First, data interpretation requires extensive computer simulations. Second, the relevance of standard results from fluid mechanics to micrometer-size particles separated from surfaces by nanometer distances is not fully demonstrated. Third, the wall shear rate must be known with high accuracy. Here we present a simple derivation of an algorithm permitting one to simulate the motion of spheres near a plane in shear flow. We check that theoretical predictions are consistent with the experimental dependence of motion on medium viscosity or particle size, and the requirement for equilibrium particle height distribution to follow Boltzman's law. The determination of the statistical relationship between particle velocity and acceleration allows one to derive the wall shear rate with 1-s(-1) accuracy and the Hamaker constant of interaction between the particle and the wall with a sensitivity better than 10(-21) J. It is demonstrated that the correlation between particle height and mean velocity during a time interval Deltat is maximal when Deltat is about 0.1-0.2 s for a particle of 1.4-microm radius. When the particle-to-surface distance ranges between 10 and 40 nm, the particle height distribution may be obtained with a standard deviation ranging between 8 and 25 nm, provided the average velocity during a 160-ms period of time is determined with 10% accuracy. It is concluded that the flow chamber allows one to detect the formation of individual bonds with a minimal lifetime of 40 ms in presence of a disruptive force of approximately 5 pN and to assess the distance dependence within the tens of nanometer range. PMID:11423392

Distance Measurements In X-Ray Pictures

NASA Astrophysics Data System (ADS)

Forsgren, Per-Ola

1987-10-01

In this paper, a measurement method for the distance between binary objects will be presented. It has been developed for a specific purpose, the evaluation of rheumatic disease, but should be useful also in other applications. It is based on a distance map in the area between binary objects. A skeleton is extracted from the distance map by searching for local maxima. The distance measure is based on the average of skelton points in a defined measurement area. An objective criterion for selection of measurement points on the skeleton is proposed. Preliminary results indicate that good repeatability is attained.

41 CFR 302-4.704 - Must we require a minimum driving distance per day?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Federal Travel Regulation System RELOCATION ALLOWANCES PERMANENT CHANGE OF STATION (PCS) ALLOWANCES FOR... driving distance not less than an average of 300 miles per day. However, an exception to the daily minimum... reasons acceptable to you. ...

SU-F-J-206: Systematic Evaluation of the Minimum Detectable Shift Using a Range- Finding Camera

DOE Office of Scientific and Technical Information (OSTI.GOV)

Platt, M; Platt, M; Lamba, M

2016-06-15

Purpose: The robotic table used for patient alignment in proton therapy is calibrated only at commissioning under well-defined conditions and table shifts may vary over time and with differing conditions. The purpose of this study is to systematically investigate minimum detectable shifts using a time-of-flight (TOF) range-finding camera for table position feedback. Methods: A TOF camera was used to acquire one hundred 424 × 512 range images from a flat surface before and after known shifts. Range was assigned by averaging central regions of the image across multiple images. Depth resolution was determined by evaluating the difference between the actualmore » shift of the surface and the measured shift. Depth resolution was evaluated for number of images averaged, area of sensor over which depth was averaged, distance from camera to surface, central versus peripheral image regions, and angle of surface relative to camera. Results: For one to one thousand images with a shift of one millimeter the range in error was 0.852 ± 0.27 mm to 0.004 ± 0.01 mm (95% C.I.). For varying regions of the camera sensor the range in error was 0.02 ± 0.05 mm to 0.47 ± 0.04 mm. The following results are for 10 image averages. For areas ranging from one pixel to 9 × 9 pixels the range in error was 0.15 ± 0.09 to 0.29 ± 0.15 mm (1σ). For distances ranging from two to four meters the range in error was 0.15 ± 0.09 to 0.28 ± 0.15 mm. For an angle of incidence between thirty degrees and ninety degrees the average range in error was 0.11 ± 0.08 to 0.17 ± 0.09 mm. Conclusion: It is feasible to use a TOF camera for measuring shifts in flat surfaces under clinically relevant conditions with submillimeter precision.« less

Level and Contamination Assessment of Soil along an Expressway in an Ecologically Valuable Area in Central Poland

PubMed Central

Radziemska, Maja; Fronczyk, Joanna

2015-01-01

Express roads are a potential source of heavy metal contamination in the surrounding environment. The Warsaw Expressway (E30) is one of the busiest roads in the capital of Poland and cuts through the ecologically valuable area (Mazowiecki Natural Landscape Park). Soil samples were collected at distances of 0.5, 4.5 and 25 m from the expressway. The concentrations of cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) were determined in the soils by the flame atomic absorption spectrometry method (FAAS). Soils located in the direct proximity of the analyzed stretch of road were found to have the highest values of pH and electrical conductivity (EC), which decreased along with an increase in the distance from the expressway. The contents of Cd, Cu and Zn were found to be higher than Polish national averages, whereas the average values of Ni and Pb were not exceeded. The pollution level was estimated based on the geo-accumulation index (Igeo), and the pollution index (PI). The results of Igeo and PI indexes revealed the following orders: Cu < Zn < Ni < Cd < Pb and Cu < Ni < Cd < Zn < Pb, and comparison with geochemical background values showed higher concentration of zinc, lead and cadmium. PMID:26512684

Level and Contamination Assessment of Soil along an Expressway in an Ecologically Valuable Area in Central Poland.

PubMed

Radziemska, Maja; Fronczyk, Joanna

2015-10-23

Express roads are a potential source of heavy metal contamination in the surrounding environment. The Warsaw Expressway (E30) is one of the busiest roads in the capital of Poland and cuts through the ecologically valuable area (Mazowiecki Natural Landscape Park). Soil samples were collected at distances of 0.5, 4.5 and 25 m from the expressway. The concentrations of cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) were determined in the soils by the flame atomic absorption spectrometry method (FAAS). Soils located in the direct proximity of the analyzed stretch of road were found to have the highest values of pH and electrical conductivity (EC), which decreased along with an increase in the distance from the expressway. The contents of Cd, Cu and Zn were found to be higher than Polish national averages, whereas the average values of Ni and Pb were not exceeded. The pollution level was estimated based on the geo-accumulation index (Igeo), and the pollution index (PI). The results of Igeo and PI indexes revealed the following orders: Cu < Zn < Ni < Cd < Pb and Cu < Ni < Cd < Zn < Pb, and comparison with geochemical background values showed higher concentration of zinc, lead and cadmium.

Complexation of Uranium by Cells and S-Layer Sheets of Bacillus sphaericus JG-A12

PubMed Central

Merroun, Mohamed L.; Raff, Johannes; Rossberg, André; Hennig, Christoph; Reich, Tobias; Selenska-Pobell, Sonja

2005-01-01

Bacillus sphaericus JG-A12 is a natural isolate recovered from a uranium mining waste pile near the town of Johanngeorgenstadt in Saxony, Germany. The cells of this strain are enveloped by a highly ordered crystalline proteinaceous surface layer (S-layer) possessing an ability to bind uranium and other heavy metals. Purified and recrystallized S-layer proteins were shown to be phosphorylated by phosphoprotein-specific staining, inductive coupled plasma mass spectrometry analysis, and a colorimetric method. We used extended X-ray absorption fine-structure (EXAFS) spectroscopy to determine the structural parameters of the uranium complexes formed by purified and recrystallized S-layer sheets of B. sphaericus JG-A12. In addition, we investigated the complexation of uranium by the vegetative bacterial cells. The EXAFS analysis demonstrated that in all samples studied, the U(VI) is coordinated to carboxyl groups in a bidentate fashion with an average distance between the U atom and the C atom of 2.88 ± 0.02 Å and to phosphate groups in a monodentate fashion with an average distance between the U atom and the P atom of 3.62 ± 0.02 Å. Transmission electron microscopy showed that the uranium accumulated by the cells of this strain is located in dense deposits at the cell surface. PMID:16151146

Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

PubMed Central

Veiga, Santiago; Cala, Antonio; Frutos, Pablo González; Navarro, Enrique

2013-01-01

The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m) were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT) algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh) turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity. Key Points The underwater turn velocity is as a critical variable related to the swimmers’ level of skill in a 200 m backstroke event. Best swimmers perform faster but no longer turn segments during a 200 m backstroke event. Best swimmers maintain their turn performance throughout the 200 m backstroke event by increasing the underwater velocity during the final part of the race. The turn distance out seems to be subordinated in order to maximize the average velocity during a 200 m backstroke event. PMID:24421733

Determination of the position of nucleus cochlear implant electrodes in the inner ear.

PubMed

Skinner, M W; Ketten, D R; Vannier, M W; Gates, G A; Yoffie, R L; Kalender, W A

1994-09-01

Accurate determination of intracochlear electrode position in patients with cochlear implants could provide a basis for detecting migration of the implant and could aid in the selection of stimulation parameters for sound processor programming. New computer algorithms for submillimeter resolution and 3-D reconstruction from spiral computed tomographic (CT) scans now make it possible to accurately determine the position of implanted electrodes within the cochlear canal. The accuracy of these algorithms was tested using an electrode array placed in a phantom model. Measurements of electrode length and interelectrode distance from spiral CT scan reconstructions were in close agreement with those from stereo microscopy. Although apparent electrode width was increased on CT scans due to partial volume averaging, a correction factor was developed for measurements from conventional radiographs and an expanded CT absorption value scale added to detect the presence of platinum electrodes and wires. The length of the cochlear canal was calculated from preoperative spiral CT scans for one patient, and the length of insertion of the electrode array was calculated from her postoperative spiral CT scans. The cross-sectional position of electrodes in relation to the outer bony wall and modiolus was measured and plotted as a function of distance with the electrode width correction applied.

Estimation of spatially restricted LET using track structure models

NASA Technical Reports Server (NTRS)

Kiefer, J.

1994-01-01

The spatial distribution of energy deposition is an important determinant in the formation of biologically significant lesions. It has been widely realized that Linear Energy Transfer (LET) being an average quantity is not sufficient to describe the situation at a submicroscopic scale. To remedy this to some extent 'energy-cut-off' values are sometimes used but since they are related to secondary electron energy and only indirectly to their range they are also not adequate although they may be easily calculated. 'Range-restricted LET' appears to be better but its determination is usually quite involved. Xapsos (1992) suggested a semi-empirical approximation based on a modified Bethe-formula which contains a number of assumption which are difficult to verify. A simpler and easier way is to use existing beam-models which describe energy deposition around an ion's path. They all agree that the energy density (i. e., energy deposited per unit mass) decreases with the inverse square of the distance from the track center. This simple dependence can be used to determine the fraction of total LET which is deposited in a cylinder of a given radius. As an example our own beam model. Energy density depends on distance x (measured in m) from the track center according to the presented formula.

Method and System for Determining Relative Displacement and Heading for Navigation

NASA Technical Reports Server (NTRS)

Sheikh, Suneel Ismail (Inventor); Pines, Darryll J. (Inventor); Conroy, Joseph Kim (Inventor); Spiridonov, Timofey N. (Inventor)

2015-01-01

A system and method for determining a location of a mobile object is provided. The system determines the location of the mobile object by determining distances between a plurality of sensors provided on a first and second movable parts of the mobile object. A stride length, heading, and separation distance between the first and second movable parts are computed based on the determined distances and the location of the mobile object is determined based on the computed stride length, heading, and separation distance.

Open star clusters in the Milky Way. Comparison of photometric and trigonometric distance scales based on Gaia TGAS data

NASA Astrophysics Data System (ADS)

Kovaleva, Dana A.; Piskunov, Anatoly E.; Kharchenko, Nina V.; Röser, Siegfried; Schilbach, Elena; Scholz, Ralf-Dieter; Reffert, Sabine; Yen, Steffi X.

2017-10-01

Context. The global survey of star clusters in the Milky Way (MWSC) is a comprehensive list of 3061 objects that provides, among other parameters, distances to clusters based on isochrone fitting. The Tycho-Gaia Astrometric Solution (TGAS) catalogue, which is a part of Gaia data release 1 (Gaia DR1), delivers accurate trigonometric parallax measurements for more than 2 million stars, including those in star clusters. Aims: We compare the open cluster photometric distance scale with the measurements given by the trigonometric parallaxes from TGAS to evaluate the consistency between these values. Methods: The average parallaxes of probable cluster members available in TGAS provide the trigonometric distance scale of open clusters, while the photometric scale is given by the distances published in the MWSC. Sixty-four clusters are suited for comparison as they have more than 16 probable members with parallax measurements in TGAS. We computed the average parallaxes of the probable members and compared these to the photometric parallaxes derived within the MWSC. Results: We find a good agreement between the trigonometric TGAS-based and the photometric MWSC-based distance scales of open clusters, which for distances less than 2.3 kpc coincide at a level of about 0.1 mas with no dependence on the distance. If at all, there is a slight systematic offset along the Galactic equator between 30° and 160° galactic longitude.

Spatial distribution of calcium-gated chloride channels in olfactory cilia.

PubMed

French, Donald A; Badamdorj, Dorjsuren; Kleene, Steven J

2010-12-30

In vertebrate olfactory receptor neurons, sensory cilia transduce odor stimuli into changes in neuronal membrane potential. The voltage changes are primarily caused by the sequential openings of two types of channel: a cyclic-nucleotide-gated (CNG) cationic channel and a calcium-gated chloride channel. In frog, the cilia are 25 to 200 µm in length, so the spatial distributions of the channels may be an important determinant of odor sensitivity. To determine the spatial distribution of the chloride channels, we recorded from single cilia as calcium was allowed to diffuse down the length of the cilium and activate the channels. A computational model of this experiment allowed an estimate of the spatial distribution of the chloride channels. On average, the channels were concentrated in a narrow band centered at a distance of 29% of the ciliary length, measured from the base of the cilium. This matches the location of the CNG channels determined previously. This non-uniform distribution of transduction proteins is consistent with similar findings in other cilia. On average, the two types of olfactory transduction channel are concentrated in the same region of the cilium. This may contribute to the efficient detection of weak stimuli.

Slum Sanitation and the Social Determinants of Women's Health in Nairobi, Kenya.

PubMed

Corburn, Jason; Hildebrand, Chantal

2015-01-01

Inadequate urban sanitation disproportionately impacts the social determinants of women's health in informal settlements or slums. The impacts on women's health include infectious and chronic illnesses, violence, food contamination and malnutrition, economic and educational attainment, and indignity. We used household survey data to report on self-rated health and sociodemographic, housing, and infrastructure conditions in the Mathare informal settlement in Nairobi, Kenya. We combined quantitative survey and mapping data with qualitative focus group information to better understand the relationships between environmental sanitation and the social determinants of women and girls' health in the Mathare slum. We find that an average of eighty-five households in Mathare share one toilet, only 15% of households have access to a private toilet, and the average distance to a public toilet is over 52 meters. Eighty-three percent of households without a private toilet report poor health. Mathare women report violence (68%), respiratory illness/cough (46%), diabetes (33%), and diarrhea (30%) as the most frequent physical burdens. Inadequate, unsafe, and unhygienic sanitation results in multiple and overlapping health, economic, and social impacts that disproportionately impact women and girls living in urban informal settlements.

Determination of West Indian manatee vocalization levels and rate

NASA Astrophysics Data System (ADS)

Phillips, Richard; Niezrecki, Christopher; Beusse, Diedrich

2004-05-01

The West Indian manatee (Trichechus manatus latirostris) has become endangered partly because of a growing number of collisions with boats. A system to warn boaters of the presence of manatees, based upon the vocalizations of manatees, could potentially reduce these boat collisions. The feasibility of this warning system would depend mainly upon two factors: the rate at which manatees vocalize and the distance in which the manatees can be detected. The research presented in this paper verifies that the average vocalization rate of the West Indian manatee is approximately one to two times per 5-min period. Several different manatee vocalization recordings were broadcast to the manatees and their response was observed. It was found that during the broadcast periods, the vocalization rates for the manatees increased substantially when compared with the average vocalization rates during nonbroadcast periods. An array of four hydrophones was used while recording the manatees. This allowed for position estimation techniques to be used to determine the location of the vocalizing manatee. Knowing the position of the manatee, the source level was determined and it was found that the mean source level of the manatee vocalizations is approximately 112 dB (re:1 Pa) @ 1 m.

Determination of West Indian manatee vocalization levels and rate

NASA Astrophysics Data System (ADS)

Phillips, Richard; Niezrecki, Christopher; Beusse, Diedrich O.

2004-01-01

The West Indian manatee (Trichechus manatus latirostris) has become endangered partly because of a growing number of collisions with boats. A system to warn boaters of the presence of manatees, based upon the vocalizations of manatees, could potentially reduce these boat collisions. The feasibility of this warning system would depend mainly upon two factors: the rate at which manatees vocalize and the distance in which the manatees can be detected. The research presented in this paper verifies that the average vocalization rate of the West Indian manatee is approximately one to two times per 5-min period. Several different manatee vocalization recordings were broadcast to the manatees and their response was observed. It was found that during the broadcast periods, the vocalization rates for the manatees increased substantially when compared with the average vocalization rates during nonbroadcast periods. An array of four hydrophones was used while recording the manatees. This allowed for position estimation techniques to be used to determine the location of the vocalizing manatee. Knowing the position of the manatee, the source level was determined and it was found that the mean source level of the manatee vocalizations is approximately 112 dB (re 1 μPa) @ 1 m.

Comparison of global positioning and computer-based tracking systems for measuring player movement distance during Australian football.

PubMed

Edgecomb, S J; Norton, K I

2006-05-01

Sports scientists require a thorough understanding of the energy demands of sports and physical activities so that optimal training strategies and game simulations can be constructed. A range of techniques has been used to both directly assess and estimate the physiological and biochemical changes during competition. A fundamental approach to understanding the contribution of the energy systems in physical activity has involved the use of time-motion studies. A number of tools have been used from simple pen and paper methods, the use of video recordings, to sophisticated electronic tracking devices. Depending on the sport, there may be difficulties in using electronic tracking devices because of concerns of player safety. This paper assesses two methods currently used to measure player movement patterns during competition: (1) global positioning technology (GPS) and (2) a computer-based tracking (CBT) system that relies on a calibrated miniaturised playing field and mechanical movements of the tracker. A range of ways was used to determine the validity and reliability of these methods for tracking Australian footballers for distance covered during games. Comparisons were also made between these methods. The results indicate distances measured using CBT overestimated the actual values (measured with a calibrated trundle wheel) by an average of about 5.8%. The GPS system overestimated the actual values by about 4.8%. Distances measured using CBT in experienced hands were as accurate as the GPS technology. Both systems showed relatively small errors in true distances.

Comparison of the ANSI, RSD, KKH, and BRMD thyroid-neck phantoms for 125I thyroid monitoring.

PubMed

Kramer, G H; Olender, G; Vlahovich, S; Hauck, B M; Meyerhof, D P

1996-03-01

The Human Monitoring Laboratory, which acts as the Canadian National Calibration Reference Centre for In Vivo Monitoring, has determined the performance characteristics of four thyroid phantoms for 125I thyroid monitoring. The phantoms were a phantom built to the specifications of the American National Standards Institute Standard N44.3; the phantom available from Radiology Support Devices; the phantom available from Kyoto Kagaku Hyohon; the phantom manufactured by the Human Monitoring Laboratory and known as the BRMD phantom. The counting efficiencies of the phantoms for 125I were measured at different phantom-to-detector distances. The anthropomorphic characteristics of the phantoms have been compared with the average man parameters. It was concluded that the BRMD, American National Standards Institute, and Radiology Support Devices phantoms have the same performance characteristics when the neck-to-detector distances are greater than 12 cm and all phantoms are essentially equivalent at 30 cm or more. The Kyoto Kagaku Hyohon phantom showed lower counting efficiencies at phantom-to-detector distances less than 30 cm. This was attributed to the design of the phantom. This study has also shown that the phantom need not be highly anthropomorphic provided the calibration is not performed at short neck-detector distances. Indeed, it might be possible to use t simple point source of 125I placed behind a 1.5 cm block of lucite at neck detector distances of 12 cm or more.

Euclidean distance and Kolmogorov-Smirnov analyses of multi-day auditory event-related potentials: a longitudinal stability study

NASA Astrophysics Data System (ADS)

Durato, M. V.; Albano, A. M.; Rapp, P. E.; Nawang, S. A.

2015-06-01

The validity of ERPs as indices of stable neurophysiological traits is partially dependent on their stability over time. Previous studies on ERP stability, however, have reported diverse stability estimates despite using the same component scoring methods. This present study explores a novel approach in investigating the longitudinal stability of average ERPs—that is, by treating the ERP waveform as a time series and then applying Euclidean Distance and Kolmogorov-Smirnov analyses to evaluate the similarity or dissimilarity between the ERP time series of different sessions or run pairs. Nonlinear dynamical analysis show that in the absence of a change in medical condition, the average ERPs of healthy human adults are highly longitudinally stable—as evaluated by both the Euclidean distance and the Kolmogorov-Smirnov test.

The Crossover Time as an Evaluation of Ocean Models Against Persistence

NASA Astrophysics Data System (ADS)

Phillipson, L. M.; Toumi, R.

2018-01-01

A new ocean evaluation metric, the crossover time, is defined as the time it takes for a numerical model to equal the performance of persistence. As an example, the average crossover time calculated using the Lagrangian separation distance (the distance between simulated trajectories and observed drifters) for the global MERCATOR ocean model analysis is found to be about 6 days. Conversely, the model forecast has an average crossover time longer than 6 days, suggesting limited skill in Lagrangian predictability by the current generation of global ocean models. The crossover time of the velocity error is less than 3 days, which is similar to the average decorrelation time of the observed drifters. The crossover time is a useful measure to quantify future ocean model improvements.

Effect of the 6PBT stirrer eccentricity and off-bottom clearance on mixing of pseudoplastic fluid in a stirred tank

NASA Astrophysics Data System (ADS)

Luan, Deyu; Zhang, Shengfeng; Wei, Xing; Duan, Zhenya

The aim of this work is to investigate the effect of the shaft eccentricity on the flow field and mixing characteristics in a stirred tank with the novel stirrer composed of perturbed six-bent-bladed turbine (6PBT). The difference between coaxial and eccentric agitations is studied using computational fluid dynamics (CFD) simulations combined with standard k-ε turbulent equations, that offer a complete image of the three-dimensional flow field. In order to determine the capability of CFD to forecast the mixing process, particle image velocimetry (PIV), which provide an accurate representation of the time-averaged velocity, was used to measure fluid velocity. The test liquid used was 1.25% (wt) xanthan gum solution, a pseudoplastic fluid with a yield stress. The comparison of the experimental and simulated mean flow fields has demonstrated that calculations based on Reynolds-averaged Navier-Stokes equations are suitable for obtaining accurate results. The effects of the shaft eccentricity and the stirrer off-bottom distance on the flow model, mixing time and mixing efficiency were extensively analyzed. It is observed that the microstructure of the flow field has a significant effect on the tracer mixing process. The eccentric agitation can lead to the flow model change and the non-symmetric flow structure, which would possess an obvious superiority of mixing behavior. Moreover, the mixing rate and mixing efficiency are dependent on the shaft eccentricity and the stirrer off-bottom distance, showing the corresponding increase of the eccentricity with the off-bottom distance. The efficient mixing process of pseudoplastic fluid stirred by 6PBT impeller is obtained with the considerably low mixing energy per unit volume when the stirrer off-bottom distance, C, is T/3 and the eccentricity, e, is 0.2. The research results provide valuable references for the improvement of pseudoplastic fluid agitation technology.

Influence of voice focus on tongue movement in speech.

PubMed

Bressmann, Tim; de Boer, Gillian; Marino, Viviane Cristina de Castro; Fabron, Eliana Maria Gradim; Berti, Larissa Cristina

2017-01-01

The present study evaluated global aspects of lingual movement during sentence production with backward and forward voice focus. Nine female participants read a sentence with a variety of consonants in a normal condition and with backward and forward voice focus. Midsagittal tongue movement was recorded with ultrasound. Tongue height over time at an anterior, a central, and a posterior measurement angle was measured. The outcome measures were speech rate, cumulative distance travelled, and average movement speed of the tongue. There were no differences in speech rate between the different conditions. The cumulative distance travelled by the tongue and the average speed indicated that the posterior tongue travelled a smaller cumulative distance and at a slower speed in the forward focus condition. The central tongue moved a larger cumulative distance and at a higher speed in the backward focus condition. The study offers first insights on how tongue movement is affected by different voice focus settings and illustrates the plasticity of tongue movement in speech.

The influence of footwear sole hardness on slip characteristics and slip-induced falls in young adults.

PubMed

Tsai, Yi-Ju; Powers, Christopher M

2013-01-01

Theoretically, a shoe that provides less friction could result in a greater slip distance and foot slipping velocity, thereby increasing the likelihood of falling. The purpose of this study was to investigate the effects of sole hardness on the probability of slip-induced falls. Forty young adults were randomized into a hard or a soft sole shoe group, and tested under both nonslippery and slippery floor conditions using a motion analysis system. The proportions of fall events in the hard- and soft-soled shoe groups were not statistically different. No differences were observed between shoe groups for average slip distance, peak and average heel velocity, and center of mass slipping velocity. A strong association was found between slip distance and the fall probability. Our results demonstrate that the probability of a slip-induced fall was not influenced by shoe hardness. Once a slip is induced, slip distance was the primary predictor of a slip-induced fall. © 2012 American Academy of Forensic Sciences.

Triosmium Clusters on a Support: Determination of Structure by X-Ray Absorption Spectroscopy and High-Resolution Microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shareghe, Mehraeen; Chi, Miaofang; Browning, Nigel D.

2011-01-01

The structures of small, robust metal clusters on a solid support were determined by a combination of spectroscopic and microscopic methods: extended X-ray absorption fine structure (EXAFS) spectroscopy, scanning transmission electron microscopy (STEM), and aberration-corrected STEM. The samples were synthesized from [Os{sub 3}(CO){sub 12}] on MgO powder to provide supported clusters intended to be triosmium. The results demonstrate that the supported clusters are robust in the absence of oxidants. Conventional high-angle annular dark-field (HAADF) STEM images demonstrate a high degree of uniformity of the clusters, with root-mean-square (rms) radii of 2.03 {+-} 0.06 {angstrom}. The EXAFS OsOs coordination number ofmore » 2.1 {+-} 0.4 confirms the presence of triosmium clusters on average and correspondingly determines an average rms cluster radius of 2.02 {+-} 0.04 {angstrom}. The high-resolution STEM images show the individual Os atoms in the clusters, confirming the triangular structures of their frames and determining OsOs distances of 2.80 {+-} 0.14 {angstrom}, matching the EXAFS value of 2.89 {+-} 0.06 {angstrom}. IR and EXAFS spectra demonstrate the presence of CO ligands on the clusters. This set of techniques is recommended as optimal for detailed and reliable structural characterization of supported clusters.« less

Isonymy structure of Sucre and Táchira, two Venezuelan states.

PubMed

Rodríguez-Larralde, A; Barrai, I

1997-10-01

The isonymy structure of two Venezuelan states, Sucre and Táchira, is described using the surnames of the Register of Electors updated in 1991. The frequency distribution of surnames pooled together by sex was obtained for the 57 counties of Sucre and the 52 counties of Táchira, based on total population sizes of 158,705 and 160,690 individuals, respectively. The coefficient of consanguinity resulting from random isonymy (phi ii), Karlin and McGregor's ni (identical to v), and the proportion of the population included in surnames represented only once (estimator A) and in the seven most frequent surnames (estimator B) were calculated for each county. RST, a measure of microdifferentiation, was estimated for each state. The Euclidean distance between pairs of counties within states was calculated together with the corresponding geographic distances. The correlations between their logarithmic transformations were significant in both cases, indicating differentiation of surnames by distance. Dendrograms based on the Euclidean distance matrix were constructed. From them a first approximation of the effect of internal migration within states was obtained. Ninety-six percent of the coefficient of consanguinity resulting from random isonymy is determined by the proportion of the population included in the seven most frequent surnames, whereas between 72% and 88% of Karlin and McGregor's ni for Sucre and Táchira, respectively, is determined by the proportion of population included in surnames represented only once. Surnames with generalized and with focal distribution were identified for both states, to be used as possible indicators of the geographic origin of their carriers. Our results indicate that Táchira's counties, on average, tend to be more isolated than Sucre's counties, as measured by RST, estimator B, and phi ii. Comparisons with the results obtained for other. Venezuelan states and other non-Venezuelan populations are also given.

Geospatial relationship of road traffic crashes and healthcare facilities with trauma surgical capabilities in Nairobi, Kenya: defining gaps in coverage.

PubMed

Shaw, Brian I; Wangara, Ali Akida; Wambua, Gladys Mbatha; Kiruja, Jason; Dicker, Rochelle A; Mweu, Judith Mutindi; Juillard, Catherine

2017-01-01

Road traffic injuries (RTIs) are a cause of significant morbidity and mortality in low- and middle-income countries. Access to timely emergency services is needed to decrease the morbidity and mortality of RTIs and other traumatic injuries. Our objective was to describe the distribution of roadtrafficcrashes (RTCs) in Nairobi with the relative distance and travel times for victims of RTCs to health facilities with trauma surgical capabilities. RTCs in Nairobi County were recorded by the Ma3route app from May 2015 to October 2015 with latitude and longitude coordinates for each RTC extracted using geocoding. Health facility administrators were interviewed to determine surgical capacity of their facilities. RTCs and health facilities were plotted on maps using ArcGIS. Distances and travel times between RTCs and health facilities were determined using the Google Maps Distance Matrix API. 89 percent (25/28) of health facilities meeting inclusion criteria were evaluated. Overall, health facilities were well equipped for trauma surgery with 96% meeting WHO Minimal Safety Criteria. 76 percent of facilities performed greater than 12 of three pre-selected 'Bellweather Procedures' shown to correlate with surgical capability. The average travel time and distance from RTCs to the nearest health facilities surveyed were 7 min and 3.4 km, respectively. This increased to 18 min and 9.6 km if all RTC victims were transported to Kenyatta National Hospital (KNH). Almost all hospitals surveyed in the present study have the ability to care for trauma patients. Treating patients directly at these facilities would decrease travel time compared with transfer to KNH. Nairobi County could benefit from formally coordinating the triage of trauma patients to more facilities to decrease travel time and potentially improve patient outcomes. III.

Use of multispectral satellite remote sensing to assess mixing of suspended sediment downstream of large river confluences

NASA Astrophysics Data System (ADS)

Umar, M.; Rhoads, Bruce L.; Greenberg, Jonathan A.

2018-01-01

Although past work has noted that contrasts in turbidity often are detectable on remotely sensed images of rivers downstream from confluences, no systematic methodology has been developed for assessing mixing over distance of confluent flows with differing surficial suspended sediment concentrations (SSSC). In contrast to field measurements of mixing below confluences, satellite remote-sensing can provide detailed information on spatial distributions of SSSC over long distances. This paper presents a methodology that uses remote-sensing data to estimate spatial patterns of SSSC downstream of confluences along large rivers and to determine changes in the amount of mixing over distance from confluences. The method develops a calibrated Random Forest (RF) model by relating training SSSC data from river gaging stations to derived spectral indices for the pixels corresponding to gaging-station locations. The calibrated model is then used to predict SSSC values for every river pixel in a remotely sensed image, which provides the basis for mapping of spatial variability in SSSCs along the river. The pixel data are used to estimate average surficial values of SSSC at cross sections spaced uniformly along the river. Based on the cross-section data, a mixing metric is computed for each cross section. The spatial pattern of change in this metric over distance can be used to define rates and length scales of surficial mixing of suspended sediment downstream of a confluence. This type of information is useful for exploring the potential influence of various controlling factors on mixing downstream of confluences, for evaluating how mixing in a river system varies over time and space, and for determining how these variations influence water quality and ecological conditions along the river.

Automatic lung nodule matching for the follow-up in temporal chest CT scans

NASA Astrophysics Data System (ADS)

Hong, Helen; Lee, Jeongjin; Shin, Yeong Gil

2006-03-01

We propose a fast and robust registration method for matching lung nodules of temporal chest CT scans. Our method is composed of four stages. First, the lungs are extracted from chest CT scans by the automatic segmentation method. Second, the gross translational mismatch is corrected by the optimal cube registration. This initial registration does not require extracting any anatomical landmarks. Third, initial alignment is step by step refined by the iterative surface registration. To evaluate the distance measure between surface boundary points, a 3D distance map is generated by the narrow-band distance propagation, which drives fast and robust convergence to the optimal location. Fourth, nodule correspondences are established by the pairs with the smallest Euclidean distances. The results of pulmonary nodule alignment of twenty patients are reported on a per-center-of mass point basis using the average Euclidean distance (AED) error between corresponding nodules of initial and follow-up scans. The average AED error of twenty patients is significantly reduced to 4.7mm from 30.0mm by our registration. Experimental results show that our registration method aligns the lung nodules much faster than the conventional ones using a distance measure. Accurate and fast result of our method would be more useful for the radiologist's evaluation of pulmonary nodules on chest CT scans.

Classic Maximum Entropy Recovery of the Average Joint Distribution of Apparent FRET Efficiency and Fluorescence Photons for Single-molecule Burst Measurements

PubMed Central

DeVore, Matthew S.; Gull, Stephen F.; Johnson, Carey K.

2012-01-01

We describe a method for analysis of single-molecule Förster resonance energy transfer (FRET) burst measurements using classic maximum entropy. Classic maximum entropy determines the Bayesian inference for the joint probability describing the total fluorescence photons and the apparent FRET efficiency. The method was tested with simulated data and then with DNA labeled with fluorescent dyes. The most probable joint distribution can be marginalized to obtain both the overall distribution of fluorescence photons and the apparent FRET efficiency distribution. This method proves to be ideal for determining the distance distribution of FRET-labeled biomolecules, and it successfully predicts the shape of the recovered distributions. PMID:22338694

Characterization of emission properties of Er3+ ions in TeO2-CdF2-WO3 glasses.

PubMed

Bilir, G; Mustafaoglu, N; Ozen, G; DiBartolo, B

2011-12-01

TeO(2)-CdF(2)-WO(3) glasses with various compositions and Er(3+) concentrations were prepared by conventional melting method. Their optical properties were studied by measuring the absorption, luminescence spectra and the decay patterns at room temperature. From the optical absorption spectra the Judd-Ofelt parameters (Ω(t)), transition probabilities, branching ratios of various transitions, and radiative lifetimes were calculated. The absorption and emission cross-section spectra of the (4)I(15/2) to (4)I(13/2) transition of erbium were determined. Emission quantum efficiencies and the average critical distance R(0) which provides a measure for the strength of cross relaxation were determined. Copyright © 2011 Elsevier B.V. All rights reserved.

Three-dimensional adult male head and skull contours.

PubMed

Lee, Calvin; Loyd, Andre M; Nightingale, Roger; Myers, Barry S; Damon, Andrew; Bass, Cameron R

2014-01-01

Traumatic brain injury (TBI) is a major public health issue, affecting millions of people annually. Anthropomorphic test devices (ATDs) and finite element models (FEMs) provide a means of understanding factors leading to TBI, potentially reducing the occurrence. Thus, there is a need to ensure that these tools accurately model humans. For example, the Hybrid III was not based on 3-dimensional human head shape data. The objective of this study is to produce average head and skull contours for an average U.S. male that can be used for ATDs and FEMs. Computed tomography (CT) scans of adult male heads were obtained from a database provided by the University of Virginia Center for Applied Biomechanics. An orthographic viewer was used to extract head and skull contours from the CT scans. Landmarks were measured graphically using HyperMesh (Altair, HyperWorks). To determine the head occipital condyle (OC) centroid, surface meshes of the OCs were made and the centroid of the surfaces was calculated. The Hybrid III contour was obtained using a MicroScribe Digitizer (Solution Technologies, Inc., Oella, MD). Comparisons of the average male and ATD contours were performed using 2 methods: (1) the midsagittal and midcoronal ATD contours relative to the OC centroid were compared to the corresponding 1 SD range of the average male contours; (2) the ATD sagittal contour was translated relative to the average male sagittal contour to minimize the area between the 2 contours. Average male head and skull contours were created. Landmark measurements were made for the dorsum sellae, nasion skin, nasion bone, infraorbital foramen, and external auditory meatus, all relative to the OC centroid. The Hybrid III midsagittal contour was outside the 1 SD range for 15.2 percent of the average male head contour but only by a maximum distance of 1.5 mm, whereas the Hybrid III midcoronal head contour was outside the 1 SD range for 12.2 percent of the average male head contour by a maximum distance of 2 mm. Minimization of the area between the midsagittal contours resulted in only 2.3 mm of translation, corroborating the good correlation between the contours established by initial comparison. Three-dimensional average male head and skull contours were created and measurements of landmark locations were made. It was found that the 50th percentile male Hybrid III corresponds well to the average male head contour and validated its 3D shape. Average adult head and skull contours and landmark data are available for public research use at http://biomechanics.pratt.duke.edu/data .

A stable pattern of EEG spectral coherence distinguishes children with autism from neuro-typical controls - a large case control study.

PubMed

Duffy, Frank H; Als, Heidelise

2012-06-26

The autism rate has recently increased to 1 in 100 children. Genetic studies demonstrate poorly understood complexity. Environmental factors apparently also play a role. Magnetic resonance imaging (MRI) studies demonstrate increased brain sizes and altered connectivity. Electroencephalogram (EEG) coherence studies confirm connectivity changes. However, genetic-, MRI- and/or EEG-based diagnostic tests are not yet available. The varied study results likely reflect methodological and population differences, small samples and, for EEG, lack of attention to group-specific artifact. Of the 1,304 subjects who participated in this study, with ages ranging from 1 to 18 years old and assessed with comparable EEG studies, 463 children were diagnosed with autism spectrum disorder (ASD); 571 children were neuro-typical controls (C). After artifact management, principal components analysis (PCA) identified EEG spectral coherence factors with corresponding loading patterns. The 2- to 12-year-old subsample consisted of 430 ASD- and 554 C-group subjects (n = 984). Discriminant function analysis (DFA) determined the spectral coherence factors' discrimination success for the two groups. Loading patterns on the DFA-selected coherence factors described ASD-specific coherence differences when compared to controls. Total sample PCA of coherence data identified 40 factors which explained 50.8% of the total population variance. For the 2- to 12-year-olds, the 40 factors showed highly significant group differences (P < 0.0001). Ten randomly generated split half replications demonstrated high-average classification success (C, 88.5%; ASD, 86.0%). Still higher success was obtained in the more restricted age sub-samples using the jackknifing technique: 2- to 4-year-olds (C, 90.6%; ASD, 98.1%); 4- to 6-year-olds (C, 90.9%; ASD 99.1%); and 6- to 12-year-olds (C, 98.7%; ASD, 93.9%). Coherence loadings demonstrated reduced short-distance and reduced, as well as increased, long-distance coherences for the ASD-groups, when compared to the controls. Average spectral loading per factor was wide (10.1 Hz). Classification success suggests a stable coherence loading pattern that differentiates ASD- from C-group subjects. This might constitute an EEG coherence-based phenotype of childhood autism. The predominantly reduced short-distance coherences may indicate poor local network function. The increased long-distance coherences may represent compensatory processes or reduced neural pruning. The wide average spectral range of factor loadings may suggest over-damped neural networks.

The enigma of the open cluster M29 (NGC 6913) solved

DOE Office of Scientific and Technical Information (OSTI.GOV)

Straižys, V.; Milašius, K.; Černis, K.

2014-11-01

Determining the distance to the open cluster M29 (NGC 6913) has proven difficult, with distances determined by various authors differing by a factor of two or more. To solve this problem, we have initiated a new photometric investigation of the cluster in the Vilnius seven-color photometric system, supplementing it with available data in the BV and JHK {sub s} photometric systems and spectra of the nine brightest stars of spectral classes O and B. Photometric spectral classes and luminosities of 260 stars in a 15' × 15' area down to V = 19 mag are used to investigate the interstellarmore » extinction run with distance and to estimate the distance of the Great Cygnus Rift, ∼ 800 pc. The interstellar reddening law in the optical and near-infrared regions is found to be close to normal, with the ratio of extinction to color excess R{sub BV} = 2.87. The extinction A{sub V} of cluster members is between 2.5 and 3.8 mag, with a mean value of 2.97 mag, or E {sub B–V} = 1.03. The average distance of eight stars of spectral types O9-B2 is 1.54 ± 0.15 kpc. Two stars from the seven brightest stars are field stars: HDE 229238 is a background B0.5 supergiant and HD 194378 is a foreground F star. In the intrinsic color-magnitude diagram, seven fainter stars of spectral classes B3-B8 are identified as possible members of the cluster. The 15 selected members of the cluster of spectral classes O9-B8 plotted on the log L/L {sub ☉} versus log T {sub eff} diagram, together with the isochrones from the Padova database, give the age of the cluster as 5 ± 1 Myr.« less

The Distance to the Massive Galactic Cluster Westerlund 2 from a Spectroscopic and HST Photometric Study

NASA Astrophysics Data System (ADS)

Vargas Álvarez, Carlos A.; Kobulnicky, Henry A.; Bradley, David R.; Kannappan, Sheila J.; Norris, Mark A.; Cool, Richard J.; Miller, Brendan P.

2013-05-01

We present a spectroscopic and photometric determination of the distance to the young Galactic open cluster Westerlund 2 using WFPC2 imaging from the Hubble Space Telescope (HST) and ground-based optical spectroscopy. HST imaging in the F336W, F439W, F555W, and F814W filters resolved many sources previously undetected in ground-based observations and yielded photometry for 1136 stars. We identified 15 new O-type stars, along with two probable binary systems, including MSP 188 (O3 + O5.5). We fit reddened spectral energy distributions based on the Padova isochrones to the photometric data to determine individual reddening parameters RV and AV for O-type stars in Wd2. We find average values langRV rang = 3.77 ± 0.09 and langAV rang = 6.51 ± 0.38 mag, which result in a smaller distance than most other spectroscopic and photometric studies. After a statistical distance correction accounting for close unresolved binaries (factor of 1.08), our spectroscopic and photometric data on 29 O-type stars yield that Westerlund 2 has a distance langdrang = 4.16 ± 0.07 (random) +0.26 (systematic) kpc. The cluster's age remains poorly constrained, with an upper limit of 3 Myr. Finally, we report evidence of a faint mid-IR polycyclic aromatic hydrocarbon ring surrounding the well-known binary candidate MSP 18, which appears to lie at the center of a secondary stellar grouping within Westerlund 2. Based on observations obtained at the Southern Astrophysical Research (SOAR) telescope, which is a joint project of the Ministério da Ciência, Tecnologia, e Inovação (MCTI) da República Federativa do Brasil, the U.S. National Optical Astronomy Observatory (NOAO), the University of North Carolina at Chapel Hill (UNC), and Michigan State University (MSU).

Models for the Immediate Environment of Ions in Aqueous Solutions of Neodymium Chloride

NASA Astrophysics Data System (ADS)

Smirnov, P. R.; Grechin, O. V.

2018-01-01

Radial distribution functions of neodymium chloride aqueous solutions in a wide range of concentrations under ambient conditions are calculated from experimental data obtained earlier via X-ray diffraction analysis. Different models of the structural organization of the system are developed. The optimum versions are determined by calculating theoretical functions for each model and comparing their fit to the experimental functions. Such quantitative characteristics of the immediate environment of Nd3+ and Cl- ions as coordination numbers, interparticle distances, and varieties of ion pairs are determined. It is shown that the average number of water molecules in the first coordination sphere of the cation falls from 9 to 6.2 as the concentration rises. The structure of the systems over the whole range of concentrations is determined by ion associates of the noncontact type.

Crystal-structure analysis of four mineral samples of anhydrite, CaSO[subscript 4], using synchrotron high-resolution powder X-ray diffraction data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antao, Sytle M.

2014-05-28

The crystal structures of four samples of anhydrite, CaSO{sub 4}, were obtained by Rietveld refinements using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and space group Amma. As an example, for one sample of anhydrite from Hants County, Nova Scotia, the unit-cell parameters are a = 7.00032(2), b = 6.99234(1), c = 6.24097(1) {angstrom}, and V = 305.487(1) {angstrom}{sup 3} with a > b. The eight-coordinated Ca atom has an average distance of 2.4667(4) {angstrom}. The tetrahedral SO{sub 4} group has two independent S-O distances of 1.484(1) to O1 and 1.478(1) {angstrom} to O2 and an average distancemore » of 1.4810(5) {angstrom}. The three independent O-S-O angles [108.99(8) x 1, 110.38(3) x 4, 106.34(9){sup o} x 1; average [6] = 109.47(2){sup o}] and S-O distances indicate that the geometry of the SO{sub 4} group is quite distorted in anhydrite. The four anhydrite samples have structural trends where the a, b, and c unit-cell parameters increase linearly with increasing unit-cell volume, V, and their average and distances are nearly constant. The grand mean = 2.4660(2) {angstrom}, and grand mean = 1.4848(3) {angstrom}, the latter is longer than 1.480(1) {angstrom} in celestite, SrSO{sub 4}, as expected.« less

A straightforward method to compute average stochastic oscillations from data samples.

PubMed

Júlvez, Jorge

2015-10-19

Many biological systems exhibit sustained stochastic oscillations in their steady state. Assessing these oscillations is usually a challenging task due to the potential variability of the amplitude and frequency of the oscillations over time. As a result of this variability, when several stochastic replications are averaged, the oscillations are flattened and can be overlooked. This can easily lead to the erroneous conclusion that the system reaches a constant steady state. This paper proposes a straightforward method to detect and asses stochastic oscillations. The basis of the method is in the use of polar coordinates for systems with two species, and cylindrical coordinates for systems with more than two species. By slightly modifying these coordinate systems, it is possible to compute the total angular distance run by the system and the average Euclidean distance to a reference point. This allows us to compute confidence intervals, both for the average angular speed and for the distance to a reference point, from a set of replications. The use of polar (or cylindrical) coordinates provides a new perspective of the system dynamics. The mean trajectory that can be obtained by averaging the usual cartesian coordinates of the samples informs about the trajectory of the center of mass of the replications. In contrast to such a mean cartesian trajectory, the mean polar trajectory can be used to compute the average circular motion of those replications, and therefore, can yield evidence about sustained steady state oscillations. Both, the coordinate transformation and the computation of confidence intervals, can be carried out efficiently. This results in an efficient method to evaluate stochastic oscillations.

Peak Running Intensity of International Rugby: Implications for Training Prescription.

PubMed

Delaney, Jace A; Thornton, Heidi R; Pryor, John F; Stewart, Andrew M; Dascombe, Ben J; Duthie, Grant M

2017-09-01

To quantify the duration and position-specific peak running intensities of international rugby union for the prescription and monitoring of specific training methodologies. Global positioning systems (GPS) were used to assess the activity profile of 67 elite-level rugby union players from 2 nations across 33 international matches. A moving-average approach was used to identify the peak relative distance (m/min), average acceleration/deceleration (AveAcc; m/s 2 ), and average metabolic power (P met ) for a range of durations (1-10 min). Differences between positions and durations were described using a magnitude-based network. Peak running intensity increased as the length of the moving average decreased. There were likely small to moderate increases in relative distance and AveAcc for outside backs, halfbacks, and loose forwards compared with the tight 5 group across all moving-average durations (effect size [ES] = 0.27-1.00). P met demands were at least likely greater for outside backs and halfbacks than for the tight 5 (ES = 0.86-0.99). Halfbacks demonstrated the greatest relative distance and P met outputs but were similar to outside backs and loose forwards in AveAcc demands. The current study has presented a framework to describe the peak running intensities achieved during international rugby competition by position, which are considerably higher than previously reported whole-period averages. These data provide further knowledge of the peak activity profiles of international rugby competition, and this information can be used to assist coaches and practitioners in adequately preparing athletes for the most demanding periods of play.

[Importance of occlusion therapy for amblyopia in partial unilateral congenital cataracts that are discovered late].

PubMed

Denion, E; Dedes, V; Bonne, M; Labalette, P; Berger, C; Guilbert, F; Bouckehove, S; Rouland, J-F

2004-11-01

The aim of this study is to investigate the importance of occlusion therapy for amblyopia in patients with partial unilateral congenital cataracts that were discovered after 24 months of age. A retrospective study was conducted on 11 patients, each of whom underwent a clinical examination including a cycloplegic refraction with atropine. The average age when the cataract was diagnosed was 35 months. The average distance visual acuity was 6/78 and the average near visual acuity was 35/175. Occlusion therapy using adhesive patches was started after refractive error correction. In two cases, observance was mediocre. Ametropia was found in every patient, with anisometropia in nine patients (alpha < 0.02). This anisometropia included an astigmatism that was always greater on the side with the cataract (alpha < 0.001), averaging 2.7 diopters. After occlusion therapy for amblyopia, the average visual acuity significantly improved to 6/22 in distance vision (alpha < 0.02) and 35/45 in near vision (alpha < 0.01). The average follow-up period was 28 months (5-60 months). Amblyopia is related to lens opacities as well as frequently associated anisometropia. Functional improvement is greater in near vision than in distance vision. With occlusion therapy for amblyopia, accommodation is preserved. This factor is of utmost importance as near vision is preferential in young children. This study provides an opportunity to recall the importance of refraction and occlusion therapy for amblyopia, which must be systematically attempted in cases of partial unilateral congenital cataracts before considering a surgical procedure.

How Far Can the Red Palm Weevil (Coleoptera: Curculionidae) Fly?: Computerized Flight Mill Studies With Field-Captured Weevils.

PubMed

Hoddle, M S; Hoddle, C D; Faleiro, J R; El-Shafie, H A F; Jeske, D R; Sallam, A A

2015-12-01

Adult Rhynchophorus ferrugineus (Olivier) captured in pheromone-baited traps in commercial date palm orchards in the Al Ahsaa Directorate, Kingdom of Saudi Arabia, were used in computerized flight mill studies to determine the flight characteristics of this highly invasive and destructive palm pest. Flight mill studies were run at three different time periods, winter (December), spring (March), and summer (May). Of the 192 weevils tethered to flight mills ∼30% failed to fly > 1 km. Of those weevils flying > 1 km (n = 139), 55% flew > 10 km, and of these flyers 5% flew > 50 km in 24 h. Flying weevils exhibited an average weight loss of 20-30% and nonflying control weevils lost ∼9-13% body weight in 24 h. Male and female weevils flying in summer (average laboratory temperature was ∼27°C) flew the longest average distances (∼25-35 km), exhibited highest weight reductions (∼30%), and greatest mortality rates (∼80%). Consequently, time of year not weevil sex or color morph had a consistent and significant effect on flight activity, weight loss, and survivorship rates. Flight activity was predominantly diurnal commencing around 5:00 a.m. and peaking between 9-11:00 a.m. before tapering off. The distribution of flight distances combined across season and sex was mesokurtic (i.e., normally distributed). © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Multiresolution analysis of the spatiotemporal variability in global radiation observed by a dense network of 99 pyranometers

NASA Astrophysics Data System (ADS)

Lakshmi Madhavan, Bomidi; Deneke, Hartwig; Witthuhn, Jonas; Macke, Andreas

2017-03-01

The time series of global radiation observed by a dense network of 99 autonomous pyranometers during the HOPE campaign around Jülich, Germany, are investigated with a multiresolution analysis based on the maximum overlap discrete wavelet transform and the Haar wavelet. For different sky conditions, typical wavelet power spectra are calculated to quantify the timescale dependence of variability in global transmittance. Distinctly higher variability is observed at all frequencies in the power spectra of global transmittance under broken-cloud conditions compared to clear, cirrus, or overcast skies. The spatial autocorrelation function including its frequency dependence is determined to quantify the degree of similarity of two time series measurements as a function of their spatial separation. Distances ranging from 100 m to 10 km are considered, and a rapid decrease of the autocorrelation function is found with increasing frequency and distance. For frequencies above 1/3 min-1 and points separated by more than 1 km, variations in transmittance become completely uncorrelated. A method is introduced to estimate the deviation between a point measurement and a spatially averaged value for a surrounding domain, which takes into account domain size and averaging period, and is used to explore the representativeness of a single pyranometer observation for its surrounding region. Two distinct mechanisms are identified, which limit the representativeness; on the one hand, spatial averaging reduces variability and thus modifies the shape of the power spectrum. On the other hand, the correlation of variations of the spatially averaged field and a point measurement decreases rapidly with increasing temporal frequency. For a grid box of 10 km × 10 km and averaging periods of 1.5-3 h, the deviation of global transmittance between a point measurement and an area-averaged value depends on the prevailing sky conditions: 2.8 (clear), 1.8 (cirrus), 1.5 (overcast), and 4.2 % (broken clouds). The solar global radiation observed at a single station is found to deviate from the spatial average by as much as 14-23 (clear), 8-26 (cirrus), 4-23 (overcast), and 31-79 W m-2 (broken clouds) from domain averages ranging from 1 km × 1 km to 10 km × 10 km in area.

A New Paradigm for Supergranulation Derived from Large-Distance Time-Distance Helioseismology: Pancakes

NASA Technical Reports Server (NTRS)

Duvall, Thomas L.; Hanasoge, Shravan M.

2012-01-01

With large separations (10-24 deg heliocentric), it has proven possible to cleanly separate the horizontal and vertical components of supergranular flow with time-distance helioseismology. These measurements require very broad filters in the k-$\\omega$ power spectrum as apparently supergranulation scatters waves over a large area of the power spectrum. By picking locations of supergranulation as peaks in the horizontal divergence signal derived from f-mode waves, it is possible to simultaneously obtain average properties of supergranules and a high signal/noise ratio by averaging over many cells. By comparing ray-theory forward modeling with HMI measurements, an average supergranule model with a peak upflow of 240 m/s at cell center at a depth of 2.3 Mm and a peak horizontal outflow of 700 m/s at a depth of 1.6 Mm. This upflow is a factor of 20 larger than the measured photospheric upflow. These results may not be consistent with earlier measurements using much shorter separations (<5 deg heliocentric). With a 30 Mm horizontal extent and a few Mm in depth, the cells might be characterized as thick pancakes.

Effect of sterilization irradiation on friction and wear of ultrahigh-molecular-weight polyethylene

NASA Technical Reports Server (NTRS)

Jones, W. R., Jr.; Hady, W. F.; Crugnola, A.

1979-01-01

The effect of sterilization gamma irradiation on the friction and wear properties of ultrahigh molecular weight polyethylene (UHMWPE) sliding against 316L stainless steel in dry air at 23 C was determined. A pin-on-disk apparatus was used. Experimental conditions included a 1-kilogram load, a 0.061- to 0.27-meter-per-second sliding velocity, and a 32000- to 578000-meter sliding distance. Although sterilization doses of 2.5 and 5.0 megarads greatly altered the average molecular weight and the molecular weight distribution, the friction and wear properties of the polymer were not significantly changed.

Classification of Pelteobagrus fish in Poyang Lake based on mitochondrial COI gene sequence.

PubMed

Zhong, Bin; Chen, Ting-Ting; Gong, Rui-Yue; Zhao, Zhe-Xia; Wang, Binhua; Fang, Chunlin; Mao, Hui-Ling

2016-11-01

We use DNA molecular marker technology to correct the deficiency of traditional morphological taxonomy. Totality 770 Pelteobagrus fish from Poyang Lake were collected. After preliminary morphological classification, random selected eight samples in each species for DNA extraction. Mitochondrial COI gene sequence was cloned with universal primers and sequenced. The results showed that there are four species of Pelteobagrus living in Poyang Lake. The average of intraspecific genetic distance value was 0.003, while the average interspecific genetic distance was 0.128. The interspecific genetic distance is far more than intraspecific genetic distance. Besides, phylogenetic tree analysis revealed that molecular systematics was in accord with morphological classification. It indicated that COI gene is an effective DNA molecular marker in Pelteobagrus classification. Surprisingly, the intraspecific difference of some individuals (P. e6, P. n6, P. e5, and P. v4) from their original named exceeded species threshold (2%), which should be renewedly classified into Pelteobagrus fulvidraco. However, another individual P. v3 was very different, because its genetic distance was over 8.4% difference from original named Pelteobagrus vachelli. Its taxonomic status remained to be further studied.

Tracking the dynamics of divergent thinking via semantic distance: Analytic methods and theoretical implications.

PubMed

Hass, Richard W

2017-02-01

Divergent thinking has often been used as a proxy measure of creative thinking, but this practice lacks a foundation in modern cognitive psychological theory. This article addresses several issues with the classic divergent-thinking methodology and presents a new theoretical and methodological framework for cognitive divergent-thinking studies. A secondary analysis of a large dataset of divergent-thinking responses is presented. Latent semantic analysis was used to examine the potential changes in semantic distance between responses and the concept represented by the divergent-thinking prompt across successive response iterations. The results of linear growth modeling showed that although there is some linear increase in semantic distance across response iterations, participants high in fluid intelligence tended to give more distant initial responses than those with lower fluid intelligence. Additional analyses showed that the semantic distance of responses significantly predicted the average creativity rating given to the response, with significant variation in average levels of creativity across participants. Finally, semantic distance does not seem to be related to participants' choices of their own most creative responses. Implications for cognitive theories of creativity are discussed, along with the limitations of the methodology and directions for future research.

Fourier Decomposition of RR Lyrae light curves and the SX Phe population in the central region of NGC 3201

NASA Astrophysics Data System (ADS)

Arellano Ferro, A.; Ahumada, J. A.; Calderón, J. H.; Kains, N.

2014-10-01

CCD time-series observations of the central region of the globular cluster NGC 3201 were obtained with the aim of performing the Fourier decomposition of the light curves of the RR Lyrae stars present in that field. This procedure gave the mean values, for the metallicity, of [Fe/H] [ZW] = - 1.483±0.006 (statistical) ±0.090 (systematic), and for the distance, 5.000±0.001 kpc (statistical) ±0.220 (systematic). The values found from two RRc stars are consistent with those derived previously. The differential reddening of the cluster was investigated and individual reddenings for the RR Lyrae stars were estimated from their V - I curves. We found an average value of E(B - V) = 0.23±0.02. An investigation of the light curves of stars in the blue straggler region led to the discovery of three new SX Phe stars. The period-luminosity relation of the SX Phe stars was used for an independent determination of the distance to the cluster and of the individual reddenings. We found a distance of 5.0 kpc.

The proportion of the face in younger adults using the thumb rule of Leonardo da Vinci.

PubMed

Oguz, O

1996-01-01

The present study was conducted to examine whether the thumb rule of Leonardo da Vinci could be an objective method in the determination of the natural and artistic proportions of human face. In this study, a sample of 400 subjects (200 male and 200 female, 22-25 years old) was used. Measurements were made of the length of thumb, the length of ear, the approximate distances between the hair line and the glabella or eyebrows, between the glabella or eyebrows and the tip of the nose and the distance between the nose and the chin, and the distance between the ear and the lateral aspect of the eye. The results obtained in the males and females showed significant (p < 0.01) correlations between the length of thumb and the proportions of the face examined in the study. Additionally, the height of the face was found to be almost three times the length of the thumb. However, the measurements obtained from female subjects were on average smaller than those taken from males. The results obtained in this experiment could be of value in understanding of the evaluation of the face for the people working in plastic surgery or art.

Boson peak, heterogeneity and intermediate-range order in binary SiO2-Al2O3 glasses.

PubMed

Ando, Mariana F; Benzine, Omar; Pan, Zhiwen; Garden, Jean-Luc; Wondraczek, Katrin; Grimm, Stephan; Schuster, Kay; Wondraczek, Lothar

2018-03-29

In binary aluminosilicate liquids and glasses, heterogeneity on intermediate length scale is a crucial factor for optical fiber performance, determining the lower limit of optical attenuation and Rayleigh scattering, but also clustering and precipitation of optically active dopants, for example, in the fabrication of high-power laser gain media. Here, we consider the low-frequency vibrational modes of such materials for assessing structural heterogeneity on molecular scale. We determine the vibrational density of states VDoS g(ω) using low-temperature heat capacity data. From correlation with low-frequency Raman spectroscopy, we obtain the Raman coupling coefficient. Both experiments allow for the extraction of the average dynamic correlation length as a function of alumina content. We find that this value decreases from about 3.9 nm to 3.3 nm when mildly increasing the alumina content from zero (vitreous silica) to 7 mol%. At the same time, the average inter-particle distance increases slightly due to the presence of oxygen tricluster species. In accordance with Loewensteinian dynamics, this proves that mild alumina doping increases structural homogeneity on molecular scale.

Numerical and Experimental Determination of the Geometric Far Field for Round Jets

NASA Technical Reports Server (NTRS)

Koch, L. Danielle; Bridges, James; Brown, Cliff; Khavaran, Abbas

2003-01-01

To reduce ambiguity in the reporting of far field jet noise, three round jets operating at subsonic conditions have recently been studied at the NASA Glenn Research Center. The goal of the investigation was to determine the location of the geometric far field both numerically and experimentally. The combination of the WIND Reynolds-Averaged Navier-Stokes solver and the MGBK jet noise prediction code was used for the computations, and the experimental data was collected in the Aeroacoustic Propulsion Laboratory. While noise sources are distributed throughout the jet plume, at great distances from the nozzle the noise will appear to be emanating from a point source and the assumption of linear propagation is valid. Closer to the jet, nonlinear propagation may be a problem, along with the known geometric issues. By comparing sound spectra at different distances from the jet, both from computational methods that assume linear propagation, and from experiments, the contributions of geometry and nonlinearity can be separately ascertained and the required measurement distance for valid experiments can be established. It is found that while the shortest arc considered here (approx. 8D) was already in the geometric far field for the high frequency sound (St greater than 2.0), the low frequency noise due to its extended source distribution reached the geometric far field at or about 50D. It is also found that sound spectra at far downstream angles does not strictly scale on Strouhal number, an observation that current modeling does not capture.

Enhancing healthcare accessibility measurements using GIS: A case study in Seoul, Korea

PubMed Central

Kim, Yeeun; Byon, Young-Ji

2018-01-01

With recent aging demographic trends, the needs for enhancing geo-spatial analysis capabilities and monitoring the status of accessibilities of its citizens with healthcare services have increased. The accessibility to healthcare is determined not only by geographic distances to service locations, but also includes travel time, available modes of transportation, and departure time. Having access to the latest and accurate information regarding the healthcare accessibility allows the municipal government to plan for improvements, including expansion of healthcare infrastructure, effective labor distribution, alternative healthcare options for the regions with low accessibilities, and redesigning the public transportation routes and schedules. This paper proposes a new method named, Seoul Enhanced 2-Step Floating Catchment Area (SE2SFCA), which is customized for the city of Seoul, where population density is higher and the average distance between healthcare-service locations tends to be shorter than the typical North American or European cities. The proposed method of SE2SFCA is found to be realistic and effective in determining the weak accessibility regions. It resolves the over-estimation issues of the past, arising from the assignment of high healthcare accessibility for the regions with large hospitals and high density of population and hospitals. PMID:29462194

Enhancing healthcare accessibility measurements using GIS: A case study in Seoul, Korea.

PubMed

Kim, Yeeun; Byon, Young-Ji; Yeo, Hwasoo

2018-01-01

With recent aging demographic trends, the needs for enhancing geo-spatial analysis capabilities and monitoring the status of accessibilities of its citizens with healthcare services have increased. The accessibility to healthcare is determined not only by geographic distances to service locations, but also includes travel time, available modes of transportation, and departure time. Having access to the latest and accurate information regarding the healthcare accessibility allows the municipal government to plan for improvements, including expansion of healthcare infrastructure, effective labor distribution, alternative healthcare options for the regions with low accessibilities, and redesigning the public transportation routes and schedules. This paper proposes a new method named, Seoul Enhanced 2-Step Floating Catchment Area (SE2SFCA), which is customized for the city of Seoul, where population density is higher and the average distance between healthcare-service locations tends to be shorter than the typical North American or European cities. The proposed method of SE2SFCA is found to be realistic and effective in determining the weak accessibility regions. It resolves the over-estimation issues of the past, arising from the assignment of high healthcare accessibility for the regions with large hospitals and high density of population and hospitals.

Asymmetry in Determinants of Running Speed During Curved Sprinting.

PubMed

Ishimura, Kazuhiro; Sakurai, Shinji

2016-08-01

This study investigates the potential asymmetries between inside and outside legs in determinants of curved running speed. To test these asymmetries, a deterministic model of curved running speed was constructed based on components of step length and frequency, including the distances and times of different step phases, takeoff speed and angle, velocities in different directions, and relative height of the runner's center of gravity. Eighteen athletes sprinted 60 m on the curved path of a 400-m track; trials were recorded using a motion-capture system. The variables were calculated following the deterministic model. The average speeds were identical between the 2 sides; however, the step length and frequency were asymmetric. In straight sprinting, there is a trade-off relationship between the step length and frequency; however, such a trade-off relationship was not observed in each step of curved sprinting in this study. Asymmetric vertical velocity at takeoff resulted in an asymmetric flight distance and time. The runners changed the running direction significantly during the outside foot stance because of the asymmetric centripetal force. Moreover, the outside leg had a larger tangential force and shorter stance time. These asymmetries between legs indicated the outside leg plays an important role in curved sprinting.

Biometric study of eyelid shape and dimensions of different races with references to beauty.

PubMed

Rhee, Seung Chul; Woo, Kyoung-Sik; Kwon, Bongsik

2012-10-01

There are few studies that evaluate the differences in the perception of beauty and attractiveness of different races or ethnicities. The purpose of this study was to determine whether there are any actual differences in the configuration of beautiful eyes among different races. Using seven composite faces of different races or ethnicities, photogrammetric measurements were performed to determine the relative differences in the average and attractive configuration of the eyes. Fourteen distance measurements and five angular measurements were performed for analyzing the morphological differences in the configuration of attractive and average faces. The results of our study found that attractive Korean faces have relatively wide-set eyes and that the medial and lateral eye fissure height is greater than that in average Korean faces. Attractive Korean faces have larger but not ptotic eyes than those in average Korean faces and they have a narrow double fold line; however, attractive Asian faces have a slightly higher double fold line. Attractive Korean or Asian faces do not have an epicanthus and there is a lot of exposure of white in the medial and lateral area of the eyes. Attractive Caucasian and African faces have an acute or keen shape to the eyes like the jaguar's eye. Attractive Asian faces have a less steep slant of the palpebral fissure compared to that of the average Asian face, but attractive Caucasian and African faces have a steeper palpebral slant than that of average Caucasian and African faces. Attractive Caucasian and African faces have a relatively narrower palpebral fissure height and width than average Caucasian and African faces. Regardless of race, attractive faces have wide-set eyes and a lower brow position than average faces. "Beautiful eyes" can be defined as youthful, brilliant, vivid, and attractive. We found that there are some common and some different characteristics in the configuration of beautiful eyes according to racial background. This journal requires that authors assign a level of evidence to each article.

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2014 CFR

2014-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2013 CFR

2013-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

A radiographic investigation to determine the safety of suture anchor systems for pediatric modified Broström ankle ligament reconstruction.

PubMed

Hazratwala, Kaushik; Best, Alistair; Kopplin, Matthew; Giza, Eric; Sullivan, Martin

2005-03-01

The modified Broström ligament reconstruction using anchor sutures has been performed in adults with clinical success; however, the safety parameters for the use of suture anchors in adolescent lateral ankle ligament reconstruction have not been established. To perform a radiographic analysis comparing the depth of penetration of suture anchors in adult ankle ligament reconstruction with the average distance of the physis from the tip of the fibula in adolescents. Cross-sectional study, Level of evidence, 4. Forty postoperative ankle radiographs of adult patients who had a modified Broström procedure were compared with 40 normal adolescent ankle radiographs. In the adult group, the distance of the suture anchor penetration from the distal tip of the fibula was measured; in the adolescent group, the distance of the physis from the distal tip of the fibula was measured. The mean depth of the suture anchors was 17 mm (range, 14-21 mm) from the tip of the fibula in the adult group, and the mean distance of the growth plate was 23 mm (range, 18-29 mm) in the adolescent group. Eight radiographs from the adolescent group (20%) had a physis measurement of <22 mm on the anteroposterior or mortise view. Using careful preoperative planning and intraoperative technique, it is possible to safely perform lateral ankle ligament repair in the skeletally immature patient using suture anchors.

Intrinsic group behaviour: Dependence of pedestrian dyad dynamics on principal social and personal features

PubMed Central

Yücel, Zeynep; Brščić, Dražen; Kanda, Takayuki; Hagita, Norihiro

2017-01-01

Being determined by human social behaviour, pedestrian group dynamics may depend on “intrinsic properties” such as the purpose of the pedestrians, their personal relation, gender, age, and body size. In this work we investigate the dynamical properties of pedestrian dyads (distance, spatial formation and velocity) by analysing a large data set of automatically tracked pedestrian trajectories in an unconstrained “ecological” setting (a shopping mall), whose apparent physical and social group properties have been analysed by three different human coders. We observed that females walk slower and closer than males, that workers walk faster, at a larger distance and more abreast than leisure oriented people, and that inter-group relation has a strong effect on group structure, with couples walking very close and abreast, colleagues walking at a larger distance, and friends walking more abreast than family members. Pedestrian height (obtained automatically through our tracking system) influences velocity and abreast distance, both growing functions of the average group height. Results regarding pedestrian age show that elderly people walk slowly, while active age adults walk at the maximum velocity. Groups with children have a strong tendency to walk in a non-abreast formation, with a large distance (despite a low abreast distance). A cross-analysis of the interplay between these intrinsic features, taking in account also the effect of an “extrinsic property” such as crowd density, confirms these major results but reveals also a richer structure. An interesting and unexpected result, for example, is that the velocity of groups with children increases with density, at least in the low-medium density range found under normal conditions in shopping malls. Children also appear to behave differently according to the gender of the parent. PMID:29095913

Intrinsic group behaviour: Dependence of pedestrian dyad dynamics on principal social and personal features.

PubMed

Zanlungo, Francesco; Yücel, Zeynep; Brščić, Dražen; Kanda, Takayuki; Hagita, Norihiro

2017-01-01

Being determined by human social behaviour, pedestrian group dynamics may depend on "intrinsic properties" such as the purpose of the pedestrians, their personal relation, gender, age, and body size. In this work we investigate the dynamical properties of pedestrian dyads (distance, spatial formation and velocity) by analysing a large data set of automatically tracked pedestrian trajectories in an unconstrained "ecological" setting (a shopping mall), whose apparent physical and social group properties have been analysed by three different human coders. We observed that females walk slower and closer than males, that workers walk faster, at a larger distance and more abreast than leisure oriented people, and that inter-group relation has a strong effect on group structure, with couples walking very close and abreast, colleagues walking at a larger distance, and friends walking more abreast than family members. Pedestrian height (obtained automatically through our tracking system) influences velocity and abreast distance, both growing functions of the average group height. Results regarding pedestrian age show that elderly people walk slowly, while active age adults walk at the maximum velocity. Groups with children have a strong tendency to walk in a non-abreast formation, with a large distance (despite a low abreast distance). A cross-analysis of the interplay between these intrinsic features, taking in account also the effect of an "extrinsic property" such as crowd density, confirms these major results but reveals also a richer structure. An interesting and unexpected result, for example, is that the velocity of groups with children increases with density, at least in the low-medium density range found under normal conditions in shopping malls. Children also appear to behave differently according to the gender of the parent.

Temporal variation in the mating structure of Sanday, Orkney Islands.

PubMed

Brennan, E R; Relethford, J H

1983-01-01

Pedigree and vital statistics data from the population of Sanday, Orkney Islands, Scotland, were used to assess temporal changes in population structure. Secular trends in patterns of mate choice were analysed for three separate birth cohorts of spouses: 1855-1884, 1885-1924 and 1925-1964. The degree to which mating was random or assortative with respect to both genealogical and geographic distance was determined by comparing average characteristics of all potential mates of married males with those of actual wives. We integrated this procedure, originally developed by Dyke (1971), into a three-fold investigation of population structure: (1) comparison of random and non-random components of relatedness as measured from pedigree data; (2) an analysis of marital distance distributions for actual and potential mates of married males; and (3) the relationship between genealogical relatedness and geographic distance. As population size decreased from 1881 to the present, total kinship and spatial distances between spouses increased. Whereas the random component of relatedness increased over time, consanguinity avoidance was sufficient to decrease the total coefficient of kinship over time. Part of the increase in consanguinity avoidance was associated with isolate breakdown, as distances between island-born spouses, as well as the total amount of off-island migration, increased from the mid-nineteenth century to the present. Mate choice was influenced by geographic distance for all time periods, although this effect diminished over time. Since decreases in population size, concomitant with increases in consanguinity avoidance and community exogamy, have probably occurred quite frequently in small human populations, as well as in rural Western communities in the past century, observed secular trends illustrate the potential for change in population structure characteristic of isolate breakdown.

Genetic diversity and structure of Sinopodophyllum hexandrum (Royle) Ying in the Qinling Mountains, China.

PubMed

Liu, Wei; Yin, Dongxue; Liu, Jianjun; Li, Na

2014-01-01

Sinopodophyllum hexandrum is an important medicinal plant whose genetic diversity must be conserved because it is endangered. The Qinling Mts. are a S. hexandrum distribution area that has unique environmental features that highly affect the evolution of the species. To provide the reference data for evolutionary and conservation studies, the genetic diversity and population structure of S. hexandrum in its overall natural distribution areas in the Qinling Mts. were investigated through inter-simple sequence repeats analysis of 32 natural populations. The 11 selected primers generated a total of 135 polymorphic bands. S. hexandrum genetic diversity was low within populations (average He = 0.0621), but higher at the species level (He = 0.1434). Clear structure and high genetic differentiation among populations were detected by using the unweighted pair group method for arithmetic averages, principle coordinate analysis and Bayesian clustering. The clustering approaches supported a division of the 32 populations into three major groups, for which analysis of molecular variance confirmed significant variation (63.27%) among populations. The genetic differentiation may have been attributed to the limited gene flow (Nm = 0.3587) in the species. Isolation by distance among populations was determined by comparing genetic distance versus geographic distance by using the Mantel test. Result was insignificant (r = 0.212, P = 0.287) at 0.05, showing that their spatial pattern and geographic locations are not correlated. Given the low within-population genetic diversity, high differentiation among populations and the increasing anthropogenic pressure on the species, in situ conservation measures were recommended to preserve S. hexandrum in Qinling Mts., and other populations must be sampled to retain as much genetic diversity of the species to achieve ex situ preservation as a supplement to in situ conservation.

Genetic Diversity and Structure of Sinopodophyllum hexandrum (Royle) Ying in the Qinling Mountains, China

PubMed Central

Liu, Wei; Yin, Dongxue; Liu, Jianjun; Li, Na

2014-01-01

Sinopodophyllum hexandrum is an important medicinal plant whose genetic diversity must be conserved because it is endangered. The Qinling Mts. are a S. hexandrum distribution area that has unique environmental features that highly affect the evolution of the species. To provide the reference data for evolutionary and conservation studies, the genetic diversity and population structure of S. hexandrum in its overall natural distribution areas in the Qinling Mts. were investigated through inter-simple sequence repeats analysis of 32 natural populations. The 11 selected primers generated a total of 135 polymorphic bands. S. hexandrum genetic diversity was low within populations (average He = 0.0621), but higher at the species level (He = 0.1434). Clear structure and high genetic differentiation among populations were detected by using the unweighted pair group method for arithmetic averages, principle coordinate analysis and Bayesian clustering. The clustering approaches supported a division of the 32 populations into three major groups, for which analysis of molecular variance confirmed significant variation (63.27%) among populations. The genetic differentiation may have been attributed to the limited gene flow (Nm = 0.3587) in the species. Isolation by distance among populations was determined by comparing genetic distance versus geographic distance by using the Mantel test. Result was insignificant (r = 0.212, P = 0.287) at 0.05, showing that their spatial pattern and geographic locations are not correlated. Given the low within-population genetic diversity, high differentiation among populations and the increasing anthropogenic pressure on the species, in situ conservation measures were recommended to preserve S. hexandrum in Qinling Mts., and other populations must be sampled to retain as much genetic diversity of the species to achieve ex situ preservation as a supplement to in situ conservation. PMID:25333788

The clustering of the SDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: First measurement of Baryon Acoustic Oscillations between redshift 0.8 and 2.2

DOE PAGES

Ata, Metin; Baumgarten, Falk; Bautista, Julian; ...

2017-10-11

We present measurements of the Baryon Acoustic Oscillation (BAO) scale in redshift-space using the clustering of quasars. We consider a sample of 147,000 quasars from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) distributed over 2044 square degrees with redshiftsmore » $0.8 < z < 2.2$ and measure their spherically-averaged clustering in both configuration and Fourier space. Our observational dataset and the 1400 simulated realizations of the dataset allow us to detect a preference for BAO that is greater than 2.5$$\\sigma$$. We determine the spherically averaged BAO distance to $z = 1.52$ to 4.4 per cent precision: $$D_V(z=1.52)=3855\\pm170 \\left(r_{\\rm d}/r_{\\rm d, fid}\\right)\\ $$Mpc. This is the first time the location of the BAO feature has been measured between redshifts 1 and 2. Our result is fully consistent with the prediction obtained by extrapolating the Planck flat $$\\Lambda$$CDM best-fit cosmology. All of our results are consistent with basic large-scale structure (LSS) theory, confirming quasars to be a reliable tracer of LSS, and provide a starting point for numerous cosmological tests to be performed with eBOSS quasar samples. We combine our result with previous, independent, BAO distance measurements to construct an updated BAO distance-ladder. Using these BAO data alone and marginalizing over the length of the standard ruler, we find $$\\Omega_{\\Lambda} > 0$$ at 6.5$$\\sigma$$ significance when testing a $$\\Lambda$$CDM model with free curvature.« less

Nest-site selection, reproductive ecology and shifts within core-use areas of Black-necked Cranes at the northern limit of the Tibetan Plateau

PubMed Central

An, Bei; Shu, Meilin

2017-01-01

We investigated population dynamics, breeding pairs, breeding habitat selection, nest density, distance between neighboring nests, nest survival, reproductive success, and recruitment rate for Black-necked Cranes (BNC, Grus nigricollis) during 2013–2015 in Yanchiwan National Nature Reserve (YCW), Gansu, China. Numbers of BNC and breeding pairs remained relatively stable at around 140 individuals and 40 pairs. Recruitment rates ranged from 15.7% to 25.8%. The average nest distance was 718.66 ± 430.50 m (2013), 1064.51 ± 323.99 m (2014) and 534.99 ± 195.45 m (2015). Average nest survival rate, hatching success, and breeding success of all 29 nests were 65.56 ± 5.09%, 57.04 ± 6.12% and 32.78% ± 2.55. Water depth, water body area, and distance to land were positively related to nest survival, while disturbance level showed a negative relationship. However, nest site selection of BNC was determined by habitat type, disturbance and water depth. BNC often foraged in mudflats and freshwater marsh but seldom foraged in saline-alkali wet meadows due to food density and quantity in April, the month when BNC choose nest sites. Conservation strategies based on habitats should consider ecological factors that may not be well predicted by nest site selection. Shifts within core-use areas from satellite tracking of BNC demonstrated that maintaining populations demands that conservation areas are large enough to permit breeding BNC changes in space use. Our results are important for conservation management and provide quantitative reproductive data for this species. PMID:28168110

Nest-site selection, reproductive ecology and shifts within core-use areas of Black-necked Cranes at the northern limit of the Tibetan Plateau.

PubMed

Zhang, Lixun; An, Bei; Shu, Meilin; Yang, Xiaojun

2017-01-01

We investigated population dynamics, breeding pairs, breeding habitat selection, nest density, distance between neighboring nests, nest survival, reproductive success, and recruitment rate for Black-necked Cranes (BNC, Grus nigricollis ) during 2013-2015 in Yanchiwan National Nature Reserve (YCW), Gansu, China. Numbers of BNC and breeding pairs remained relatively stable at around 140 individuals and 40 pairs. Recruitment rates ranged from 15.7% to 25.8%. The average nest distance was 718.66 ± 430.50 m (2013), 1064.51 ± 323.99 m (2014) and 534.99 ± 195.45 m (2015). Average nest survival rate, hatching success, and breeding success of all 29 nests were 65.56 ± 5.09%, 57.04 ± 6.12% and 32.78% ± 2.55. Water depth, water body area, and distance to land were positively related to nest survival, while disturbance level showed a negative relationship. However, nest site selection of BNC was determined by habitat type, disturbance and water depth. BNC often foraged in mudflats and freshwater marsh but seldom foraged in saline-alkali wet meadows due to food density and quantity in April, the month when BNC choose nest sites. Conservation strategies based on habitats should consider ecological factors that may not be well predicted by nest site selection. Shifts within core-use areas from satellite tracking of BNC demonstrated that maintaining populations demands that conservation areas are large enough to permit breeding BNC changes in space use. Our results are important for conservation management and provide quantitative reproductive data for this species.

Impact of a University-Based Outpatient Telemedicine Program on Time Savings, Travel Costs, and Environmental Pollutants.

PubMed

Dullet, Navjit W; Geraghty, Estella M; Kaufman, Taylor; Kissee, Jamie L; King, Jesse; Dharmar, Madan; Smith, Anthony C; Marcin, James P

2017-04-01

The objective of this study was to estimate travel-related and environmental savings resulting from the use of telemedicine for outpatient specialty consultations with a university telemedicine program. The study was designed to retrospectively analyze the telemedicine consultation database at the University of California Davis Health System (UCDHS) between July 1996 and December 2013. Travel distances and travel times were calculated between the patient home, the telemedicine clinic, and the UCDHS in-person clinic. Travel cost savings and environmental impact were calculated by determining differences in mileage reimbursement rate and emissions between those incurred in attending telemedicine appointments and those that would have been incurred if a visit to the hub site had been necessary. There were 19,246 consultations identified among 11,281 unique patients. Telemedicine visits resulted in a total travel distance savings of 5,345,602 miles, a total travel time savings of 4,708,891 minutes or 8.96 years, and a total direct travel cost savings of $2,882,056. The mean per-consultation round-trip distance savings were 278 miles, average travel time savings were 245 minutes, and average cost savings were $156. Telemedicine consultations resulted in a total emissions savings of 1969 metric tons of CO 2 , 50 metric tons of CO, 3.7 metric tons of NO x , and 5.5 metric tons of volatile organic compounds. This study demonstrates the positive impact of a health system's outpatient telemedicine program on patient travel time, patient travel costs, and environmental pollutants. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Improved performance of semiconductor laser tracking frequency gauge

NASA Astrophysics Data System (ADS)

Kaplan, D. M.; Roberts, T. J.; Phillips, J. D.; Reasenberg, R. D.

2018-03-01

We describe new results from the semiconductor-laser tracking frequency gauge, an instrument that can perform sub-picometer distance measurements and has applications in gravity research and in space-based astronomical instruments proposed for the study of light from extrasolar planets. Compared with previous results, we have improved incremental distance accuracy by a factor of two, to 0.9 pm in 80 s averaging time, and absolute distance accuracy by a factor of 20, to 0.17 μm in 1000 s. After an interruption of operation of a tracking frequency gauge used to control a distance, it is now possible, using a nonresonant measurement interferometer, to restore the distance to picometer accuracy by combining absolute and incremental distance measurements.

Distances to Nearby Galaxies via Long Period Variables

NASA Astrophysics Data System (ADS)

Jurcevic, John S.

A new method of measuring extra-Galactic distances has been developed based on the relationship between the luminosity of red supergiant variable (RSV) stars at optical wavelengths and the period of their luminosity variation. This period-luminosity (PL) relationship has been calibrated with RSVs from the Galactic Perseus OB1 association, the Large Magellanic Cloud, and M33 in the broadband optical R and I-bands, in a narrow part of the I-band at 8250 Å, and in the infrared K-band. By using these RSV PL relations, the distances to a sample of nearby galaxies (M101, NGC 2403, and NGC 2366) were determined. These galaxies were chosen because they had existing Cepheid based distances which allowed for a comparison between the two methods and provided a means of verifying the effectiveness of the RSV PL relation. The galaxies were also chosen to span a range of metallicity to allow an investigation of any effects due to metallicity differences. Photometry in the R-band was obtained over a period of three years for the galaxies with a coverage of 20, 17, and 13 epochs for M101, NGC 2403, and NGC 2366, respectively. By looking for red variable stars with periods in the range 100-1200 days the total number of RSVs discovered in the three galaxies was 123. Assuming a distance modulus for the Large Magellanic Cloud of 18.5 +/- 0.1 mag, single epoch I-band photometry of the RSVs was used to construct random phase PL relations resulting in distance moduli for M101, NGC 2403, and NGC 2366 of 29.40 +/- 0.16, 27.67 +/- 0.16, and 27.86 +/- 0.20 mag, respectively. Similarly, PL relations were also found using phase averaged R-band magnitudes which produced distance moduli of 29.09 +/- 0.16, 27.56 +/- 0.16, and 27.76 +/- 0.21 mag, respectively. These distances have been corrected for extinction by assuming values of E(B - V) = 0.10, 0.04, and 0.04 mag. The distances derived agree with those found via Cepheids which indicates that RSVs provide a very useful new method for measuring distances.

Virtual Averaging Making Nonframe-Averaged Optical Coherence Tomography Images Comparable to Frame-Averaged Images.

PubMed

Chen, Chieh-Li; Ishikawa, Hiroshi; Wollstein, Gadi; Bilonick, Richard A; Kagemann, Larry; Schuman, Joel S

2016-01-01

Developing a novel image enhancement method so that nonframe-averaged optical coherence tomography (OCT) images become comparable to active eye-tracking frame-averaged OCT images. Twenty-one eyes of 21 healthy volunteers were scanned with noneye-tracking nonframe-averaged OCT device and active eye-tracking frame-averaged OCT device. Virtual averaging was applied to nonframe-averaged images with voxel resampling and adding amplitude deviation with 15-time repetitions. Signal-to-noise (SNR), contrast-to-noise ratios (CNR), and the distance between the end of visible nasal retinal nerve fiber layer (RNFL) and the foveola were assessed to evaluate the image enhancement effect and retinal layer visibility. Retinal thicknesses before and after processing were also measured. All virtual-averaged nonframe-averaged images showed notable improvement and clear resemblance to active eye-tracking frame-averaged images. Signal-to-noise and CNR were significantly improved (SNR: 30.5 vs. 47.6 dB, CNR: 4.4 vs. 6.4 dB, original versus processed, P < 0.0001, paired t -test). The distance between the end of visible nasal RNFL and the foveola was significantly different before (681.4 vs. 446.5 μm, Cirrus versus Spectralis, P < 0.0001) but not after processing (442.9 vs. 446.5 μm, P = 0.76). Sectoral macular total retinal and circumpapillary RNFL thicknesses showed systematic differences between Cirrus and Spectralis that became not significant after processing. The virtual averaging method successfully improved nontracking nonframe-averaged OCT image quality and made the images comparable to active eye-tracking frame-averaged OCT images. Virtual averaging may enable detailed retinal structure studies on images acquired using a mixture of nonframe-averaged and frame-averaged OCT devices without concerning about systematic differences in both qualitative and quantitative aspects.

Virtual Averaging Making Nonframe-Averaged Optical Coherence Tomography Images Comparable to Frame-Averaged Images

PubMed Central

Chen, Chieh-Li; Ishikawa, Hiroshi; Wollstein, Gadi; Bilonick, Richard A.; Kagemann, Larry; Schuman, Joel S.

2016-01-01

Purpose Developing a novel image enhancement method so that nonframe-averaged optical coherence tomography (OCT) images become comparable to active eye-tracking frame-averaged OCT images. Methods Twenty-one eyes of 21 healthy volunteers were scanned with noneye-tracking nonframe-averaged OCT device and active eye-tracking frame-averaged OCT device. Virtual averaging was applied to nonframe-averaged images with voxel resampling and adding amplitude deviation with 15-time repetitions. Signal-to-noise (SNR), contrast-to-noise ratios (CNR), and the distance between the end of visible nasal retinal nerve fiber layer (RNFL) and the foveola were assessed to evaluate the image enhancement effect and retinal layer visibility. Retinal thicknesses before and after processing were also measured. Results All virtual-averaged nonframe-averaged images showed notable improvement and clear resemblance to active eye-tracking frame-averaged images. Signal-to-noise and CNR were significantly improved (SNR: 30.5 vs. 47.6 dB, CNR: 4.4 vs. 6.4 dB, original versus processed, P < 0.0001, paired t-test). The distance between the end of visible nasal RNFL and the foveola was significantly different before (681.4 vs. 446.5 μm, Cirrus versus Spectralis, P < 0.0001) but not after processing (442.9 vs. 446.5 μm, P = 0.76). Sectoral macular total retinal and circumpapillary RNFL thicknesses showed systematic differences between Cirrus and Spectralis that became not significant after processing. Conclusion The virtual averaging method successfully improved nontracking nonframe-averaged OCT image quality and made the images comparable to active eye-tracking frame-averaged OCT images. Translational Relevance Virtual averaging may enable detailed retinal structure studies on images acquired using a mixture of nonframe-averaged and frame-averaged OCT devices without concerning about systematic differences in both qualitative and quantitative aspects. PMID:26835180

Evidence conflict measure based on OWA operator in open world

PubMed Central

Wang, Shiyu; Liu, Xiang; Zheng, Hanqing; Wei, Boya

2017-01-01

Dempster-Shafer evidence theory has been extensively used in many information fusion systems since it was proposed by Dempster and extended by Shafer. Many scholars have been conducted on conflict management of Dempster-Shafer evidence theory in past decades. However, how to determine a potent parameter to measure evidence conflict, when the given environment is in an open world, namely the frame of discernment is incomplete, is still an open issue. In this paper, a new method which combines generalized conflict coefficient, generalized evidence distance, and generalized interval correlation coefficient based on ordered weighted averaging (OWA) operator, to measure the conflict of evidence is presented. Through ordered weighted average of these three parameters, the combinatorial coefficient can still measure the conflict effectively when one or two parameters are not valid. Several numerical examples demonstrate the effectiveness of the proposed method. PMID:28542271

Hydraulic-fracturing measurmements in two boreholes near the Spent Fuel Test-Climax, Climax Stock, Nevada Test Site

USGS Publications Warehouse

Ellis, William L.

1983-01-01

Hydraulic-fracturing measurements are used to infer the magnitude of the least principal stress in the vicinity of the Spent Fuel Test-Climax, located in the Climax stock at the Nevada Test Site. The measurements, made at various depths in two exploratory boreholes, suggest that the local stress field is not uniform. Estimates of the least principal stress magnitude vary over distances of a few tens of meters, with the smaller values averaging 2.9 MPa and the larger values averaging 5.5 MPa. The smaller values are in agreement with the minimum-stress magnitude of 2.8 MPa determined in a nearby drift in 1979, using an overcoring technique. Jointing in the granitic rock mass and (or) the influence of nearby faults may account for the apparent variation in minimum-stress magnitude indicated by the hydrofracture data.

The relation between tilt table and acceleration-tolerance and their dependence on stature and physical fitness

NASA Technical Reports Server (NTRS)

Klein, K. E.; Backhausen, F.; Bruner, H.; Eichhorn, J.; Jovy, D.; Schotte, J.; Vogt, L.; Wegman, H. M.

1980-01-01

A group of 12 highly trained athletes and a group of 12untrained students were subjected to passive changes of position on a tilt table and positive accelerations in a centrifuge. During a 20 min tilt, including two additional respiratory maneuvers, the number of faints and average cardiovascular responses did not differ significantly between the groups. During linear increase of acceleration, the average blackout level was almost identical in both groups. Statistically significant coefficients of product-moment correlation for various relations were obtained. The coefficient of multiple determination computed for the dependence of acceleration tolerance on heart-eye distance and systolic blood pressure at rest allows the explanation of almost 50% of the variation of acceleration tolerance. The maximum oxygen uptake showed the expected significant correlation to the heart rate at rest, but not the acceleration tolerance, or to the cardiovascular responses to tilting.

Interaction of a parabolic-shaped pulse pair in a passively mode-locked Yb-doped fiber laser

NASA Astrophysics Data System (ADS)

Wang, Da-Shuai; Wu, Ge; Gao, Bo; Tian, Xiao-Jian

2013-01-01

We numerically investigate the formation and interaction of a parabolic-shaped pulse pair in a passively mode-locked Yb-doped fiber laser. Based on a lumped model, the parabolic-shaped pulse pair is obtained by controlling the inter-cavity average dispersion and gain saturation energy, Moreover, pulse repulsive and attractive motion are also achieved with different pulse separations. Simulation results show that the phase shift plays an important role in pulse interaction, and the interaction is determined by the inter-cavity average dispersion and gain saturation energy, i.e., the strength of the interaction is proportional to the gain saturation energy, a stronger gain saturation energy will result in a higher interaction intensity. On the contrary, the increase of the inter-cavity dispersion will counterbalance some interaction force. The results also show that the interaction of a parabolic-shaped pulse pair has a larger interaction distance compared to conventional solitons.

INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Coexistence and Extinction Pattern of Asymmetric Cyclic Game Species in a Square Lattice

NASA Astrophysics Data System (ADS)

Dong, Lin-Rong; Li, Yong-Ming; Yang, Guang-Can

2010-06-01

The co-evolutionary dynamics of a cyclic game system is investigated in a two-dimensional square lattice with the asymmetrical rates for three species. Different with the well-mixed system, coexistence and extinction emerge alternately in the system, where a “zero-one" behavior is robust for a small population size, whereas, the system is predominated by coexistence for a big population one. We study in detail the influence about the fluctuation to the change of the state, and find that the difference between the maximal amplitude about the fluctuation and the average intensity determines which state the system is ultimately. In addition, we introduce Potts energy to explain the reason of the “zero-one" behavior. It is shown that the average Potts energy per site is the distance to the “zero-one" behavior in the model.

Geographic disparities in patient travel for dialysis in the United States.

PubMed

Stephens, J Mark; Brotherton, Samuel; Dunning, Stephan C; Emerson, Larry C; Gilbertson, David T; Harrison, David J; Kochevar, John J; McClellan, Ann C; McClellan, William M; Wan, Shaowei; Gitlin, Matthew

2013-01-01

To estimate travel distance and time for US hemodialysis patients and to compare travel of rural versus urban patients. Dialysis patient residences were estimated from ZIP code-level patient counts as of February 2011 allocated within the ZIP code proportional to census tract-level population, obtained from the 2010 U.S. Census. Dialysis facility addresses were obtained from Medicare public-use files. Patients were assigned to an "original" and "replacement" facility, assuming patients used the facility closest to home and would select the next closest facility as a replacement, if a replacement facility was required. Driving distances and times were calculated between patient residences and facility locations using GIS software. The mean one-way driving distance to the original facility was 7.9 miles; for rural patients average distances were 2.5 times farther than for urban patients (15.9 vs. 6.2 miles). Mean driving distance to a replacement facility was 10.6 miles, with rural patients traveling on average 4 times farther than urban patients to a replacement facility (28.8 vs. 6.8 miles). Rural patients travel much longer distances for dialysis than urban patients. Accessing alternative facilities, if required, would greatly increase rural patient travel, while having little impact on urban patients. Increased travel could have clinical implications as longer travel is associated with increased mortality and decreased quality of life. © 2013 National Rural Health Association.

Electrofishing distance needed to estimate consistent Index of Biotic Integrity (IBI) scores in raftable Oregon rivers

EPA Science Inventory

An important issue surrounding assessment of riverine fish assemblages is the minimum amount of sampling distance needed to adequately determine biotic condition. Determining adequate sampling distance is important because sampling distance affects estimates of fish assemblage c...

Does running with or without diet changes reduce fat mass in novice runners? A 1-year prospective study.

PubMed

Nielsen, Rasmus O; Videbaek, Solvej; Hansen, Mette; Parner, Erik T; Rasmussen, Sten; Langberg, Henning

2016-01-01

The aim of this study was to explore how average weekly running distance, combined with changes in diet habits and reasons to take up running, influence fat mass. Fat mass was assessed by bioelectrical impedance at baseline and after 12 months in 538 novice runners included in a 1-year observational prospective follow-up study. During follow-up, running distance for each participant was continuously measured by GPS while reasons to take up running and diet changes were assessed trough web-based questionnaires. Loss of fat mass was compared between runners covering an average of 5 km or more per week and those running shorter distances. Runners who took up running to lose weight and ran over 5 km per week in average over a one-year period combined with a diet change reduced fat mass by -5.58 kg (95% CI: -8.69; -2.46; P<0.001). Compared with subjects also running over 5 km per week but without diet changes, the mean difference in fat mass between groups was 3.81 kg (95% CI: -5.96; -1.66; P<0.001). A difference of -3.55 kg (95% CI: -5.69; -1.41; P<0.001) was found when comparing with those running less than 5 km per week and making changes to their own diet. An average running distance of more than 5 km per week in runners who took up running to lose weight combined with a targeted diet change seems effective in reducing fat mass over a one-year period among novice runners. Still, randomized controlled trials are needed to better document the effects of self-selected diet changes.

A NEW METHOD TO QUANTIFY AND REDUCE THE NET PROJECTION ERROR IN WHOLE-SOLAR-ACTIVE-REGION PARAMETERS MEASURED FROM VECTOR MAGNETOGRAMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Falconer, David A.; Tiwari, Sanjiv K.; Moore, Ronald L.

Projection errors limit the use of vector magnetograms of active regions (ARs) far from the disk center. In this Letter, for ARs observed up to 60° from the disk center, we demonstrate a method for measuring and reducing the projection error in the magnitude of any whole-AR parameter that is derived from a vector magnetogram that has been deprojected to the disk center. The method assumes that the center-to-limb curve of the average of the parameter’s absolute values, measured from the disk passage of a large number of ARs and normalized to each AR’s absolute value of the parameter atmore » central meridian, gives the average fractional projection error at each radial distance from the disk center. To demonstrate the method, we use a large set of large-flux ARs and apply the method to a whole-AR parameter that is among the simplest to measure: whole-AR magnetic flux. We measure 30,845 SDO /Helioseismic and Magnetic Imager vector magnetograms covering the disk passage of 272 large-flux ARs, each having whole-AR flux >10{sup 22} Mx. We obtain the center-to-limb radial-distance run of the average projection error in measured whole-AR flux from a Chebyshev fit to the radial-distance plot of the 30,845 normalized measured values. The average projection error in the measured whole-AR flux of an AR at a given radial distance is removed by multiplying the measured flux by the correction factor given by the fit. The correction is important for both the study of the evolution of ARs and for improving the accuracy of forecasts of an AR’s major flare/coronal mass ejection productivity.« less

The precision of locomotor odometry in humans.

PubMed

Durgin, Frank H; Akagi, Mikio; Gallistel, Charles R; Haiken, Woody

2009-03-01

Two experiments measured the human ability to reproduce locomotor distances of 4.6-100 m without visual feedback and compared distance production with time production. Subjects were not permitted to count steps. It was found that the precision of human odometry follows Weber's law that variability is proportional to distance. The coefficients of variation for distance production were much lower than those measured for time production for similar durations. Gait parameters recorded during the task (average step length and step frequency) were found to be even less variable suggesting that step integration could be the basis for non-visual human odometry.

Dynamic Parameters of the 2015 Nepal Gorkha Mw7.8 Earthquake Constrained by Multi-observations

NASA Astrophysics Data System (ADS)

Weng, H.; Yang, H.

2017-12-01

Dynamic rupture model can provide much detailed insights into rupture physics that is capable of assessing future seismic risk. Many studies have attempted to constrain the slip-weakening distance, an important parameter controlling friction behavior of rock, for several earthquakes based on dynamic models, kinematic models, and direct estimations from near-field ground motion. However, large uncertainties of the values of the slip-weakening distance still remain, mostly because of the intrinsic trade-offs between the slip-weakening distance and fault strength. Here we use a spontaneously dynamic rupture model to constrain the frictional parameters of the 25 April 2015 Mw7.8 Nepal earthquake, by combining with multiple seismic observations such as high-rate cGPS data, strong motion data, and kinematic source models. With numerous tests we find the trade-off patterns of final slip, rupture speed, static GPS ground displacements, and dynamic ground waveforms are quite different. Combining all the seismic constraints we can conclude a robust solution without a substantial trade-off of average slip-weakening distance, 0.6 m, in contrast to previous kinematical estimation of 5 m. To our best knowledge, this is the first time to robustly determine the slip-weakening distance on seismogenic fault from seismic observations. The well-constrained frictional parameters may be used for future dynamic models to assess seismic hazard, such as estimating the peak ground acceleration (PGA) etc. Similar approach could also be conducted for other great earthquakes, enabling broad estimations of the dynamic parameters in global perspectives that can better reveal the intrinsic physics of earthquakes.

Chemical Composition of Young Stars in the Leading Arm of the Magellanic System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Lan; Zhao, Gang; Moni Bidin, Christian

2017-02-01

Chemical abundances of eight O- and B-type stars are determined from high-resolution spectra obtained with the MIKE instrument on the Magellan 6.5 m Clay telescope. The sample is selected from 42 candidates for membership in the Leading Arm (LA) of the Magellanic System. Stellar parameters are measured by two independent grids of model atmospheres and analysis procedures, confirming the consistency of the stellar parameter results. Abundances of seven elements (He, C, N, O, Mg, Si, and S) are determined for the stars, as are their radial velocities and estimates of distances and ages. Among the seven B-type stars analyzed, themore » five that have radial velocities compatible with membership of the LA have an average [Mg/H] of −0.42 ± 0.16, significantly lower than the average of the remaining two, [Mg/H] = −0.07±0.06, which are kinematical members of the Galactic disk. Among the five LA members, four have individual [Mg/H] abundance compatible with that in the LMC. Within errors, we cannot exclude the possibility that one of these stars has an [Mg/H] consistent with the more metal-poor, SMC-like material. The remaining fifth star has an [Mg/H] close to Milky Way values. Distances to the LA members indicate that they are at the edge of the Galactic disk, while ages are of the order of ∼50–70 Myr, lower than the dynamical age of the LA, suggesting a single star-forming episode in the LA. V {sub LSR} of the LA members decreases with decreasing Magellanic longitude, confirming the results of previous LA gas studies.« less

Evaluation of Observation-Fused Regional Air Quality Model Results for Population Air Pollution Exposure Estimation

PubMed Central

Chen, Gang; Li, Jingyi; Ying, Qi; Sherman, Seth; Perkins, Neil; Rajeshwari, Sundaram; Mendola, Pauline

2014-01-01

In this study, Community Multiscale Air Quality (CMAQ) model was applied to predict ambient gaseous and particulate concentrations during 2001 to 2010 in 15 hospital referral regions (HRRs) using a 36-km horizontal resolution domain. An inverse distance weighting based method was applied to produce exposure estimates based on observation-fused regional pollutant concentration fields using the differences between observations and predictions at grid cells where air quality monitors were located. Although the raw CMAQ model is capable of producing satisfying results for O3 and PM2.5 based on EPA guidelines, using the observation data fusing technique to correct CMAQ predictions leads to significant improvement of model performance for all gaseous and particulate pollutants. Regional average concentrations were calculated using five different methods: 1) inverse distance weighting of observation data alone, 2) raw CMAQ results, 3) observation-fused CMAQ results, 4) population-averaged raw CMAQ results and 5) population-averaged fused CMAQ results. It shows that while O3 (as well as NOx) monitoring networks in the HRR regions are dense enough to provide consistent regional average exposure estimation based on monitoring data alone, PM2.5 observation sites (as well as monitors for CO, SO2, PM10 and PM2.5 components) are usually sparse and the difference between the average concentrations estimated by the inverse distance interpolated observations, raw CMAQ and fused CMAQ results can be significantly different. Population-weighted average should be used to account spatial variation in pollutant concentration and population density. Using raw CMAQ results or observations alone might lead to significant biases in health outcome analyses. PMID:24747248

A new analytical method for the classification of time-location data obtained from the global positioning system (GPS).

PubMed

Kim, Taehyun; Lee, Kiyoung; Yang, Wonho; Yu, Seung Do

2012-08-01

Although the global positioning system (GPS) has been suggested as an alternative way to determine time-location patterns, its use has been limited. The purpose of this study was to evaluate a new analytical method of classifying time-location data obtained by GPS. A field technician carried a GPS device while simulating various scripted activities and recorded all movements by the second in an activity diary. The GPS device recorded geological data once every 15 s. The daily monitoring was repeated 18 times. The time-location data obtained by the GPS were compared with the activity diary to determine selection criteria for the classification of the GPS data. The GPS data were classified into four microenvironments (residential indoors, other indoors, transit, and walking outdoors); the selection criteria used were used number of satellites (used-NSAT), speed, and distance from residence. The GPS data were classified as indoors when the used-NSAT was below 9. Data classified as indoors were further classified as residential indoors when the distance from the residence was less than 40 m; otherwise, they were classified as other indoors. Data classified as outdoors were further classified as being in transit when the speed exceeded 2.5 m s(-1); otherwise, they were classified as walking outdoors. The average simple percentage agreement between the time-location classifications and the activity diary was 84.3 ± 12.4%, and the kappa coefficient was 0.71. The average differences between the time diary and the GPS results were 1.6 ± 2.3 h for the time spent in residential indoors, 0.9 ± 1.7 h for the time spent in other indoors, 0.4 ± 0.4 h for the time spent in transit, and 0.8 ± 0.5 h for the time spent walking outdoors. This method can be used to determine time-activity patterns in exposure-science studies.

SU-F-J-34: Automatic Target-Based Patient Positioning Framework for Image-Guided Radiotherapy in Prostate Cancer Treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sasahara, M; Arimura, H; Hirose, T

Purpose: Current image-guided radiotherapy (IGRT) procedure is bonebased patient positioning, followed by subjective manual correction using cone beam computed tomography (CBCT). This procedure might cause the misalignment of the patient positioning. Automatic target-based patient positioning systems achieve the better reproducibility of patient setup. Our aim of this study was to develop an automatic target-based patient positioning framework for IGRT with CBCT images in prostate cancer treatment. Methods: Seventy-three CBCT images of 10 patients and 24 planning CT images with digital imaging and communications in medicine for radiotherapy (DICOM-RT) structures were used for this study. Our proposed framework started from themore » generation of probabilistic atlases of bone and prostate from 24 planning CT images and prostate contours, which were made in the treatment planning. Next, the gray-scale histograms of CBCT values within CTV regions in the planning CT images were obtained as the occurrence probability of the CBCT values. Then, CBCT images were registered to the atlases using a rigid registration with mutual information. Finally, prostate regions were estimated by applying the Bayesian inference to CBCT images with the probabilistic atlases and CBCT value occurrence probability. The proposed framework was evaluated by calculating the Euclidean distance of errors between two centroids of prostate regions determined by our method and ground truths of manual delineations by a radiation oncologist and a medical physicist on CBCT images for 10 patients. Results: The average Euclidean distance between the centroids of extracted prostate regions determined by our proposed method and ground truths was 4.4 mm. The average errors for each direction were 1.8 mm in anteroposterior direction, 0.6 mm in lateral direction and 2.1 mm in craniocaudal direction. Conclusion: Our proposed framework based on probabilistic atlases and Bayesian inference might be feasible to automatically determine prostate regions on CBCT images.« less

Online determination of biophysical parameters of mucous membranes of a human body

NASA Astrophysics Data System (ADS)

Lisenko, S. A.; Kugeiko, M. M.

2013-07-01

We have developed a method for online determination of biophysical parameters of mucous membranes (MMs) of a human body (transport scattering coefficient, scattering anisotropy factor, haemoglobin concentration, degrees of blood oxygenation, average diameter of capillaries with blood) from measurements of spectral and spatial characteristics of diffuse reflection. The method is based on regression relationships between linearly independent components of the measured light signals and the unknown parameters of MMs, obtained by simulation of the radiation transfer in the MM under conditions of its general variability. We have proposed and justified the calibration-free fibre-optic method for determining the concentration of haemoglobin in MMs by measuring the light signals diffusely reflected by the tissue in four spectral regions at two different distances from the illumination spot. We have selected the optimal wavelengths of optical probing for the implementation of the method.

A survey of U.S. Fish and Wildlife Service employees regarding topics for distance education-Summary report to respondents

USGS Publications Warehouse

Ratz, Joan M.; Shuster, Rudy M.; Marcy, Ann M.

2011-01-01

Our preliminary conclusion, based only on frequencies of responses and averages, is that our survey respondents appear to prefer traditional instructor-led training. However, they would still enroll in distance education courses. The distance education technologies of audio conferencing, computer-mediated training, and written resource provision are the technologies respondents reported being most familiar and accessible to them. For four of the five topic areas-creating and maintaining partnerships, technology, program planning and development, and outreach methods-the response frequencies and averages indicate that the topics were viewed as both relevant and important. Respondents were more neutral regarding the relevance and importance of the topic of evaluation methods. Respondents reported preferences for different types of information on different topics and also reported preferences in delivery mode of training for each topic area. Detailed results and conclusions will be included in the completion reports for the two studies.

Statistical properties of links of network: A survey on the shipping lines of Worldwide Marine Transport Network

NASA Astrophysics Data System (ADS)

Zhang, Wenjun; Deng, Weibing; Li, Wei

2018-07-01

Node properties and node importance identification of networks have been vastly studied in the last decades. While in this work, we analyze the links' properties of networks by taking the Worldwide Marine Transport Network (WMTN) as an example, i.e., statistical properties of the shipping lines of WMTN have been investigated in various aspects: Firstly, we study the feature of loops in the shipping lines by defining the line saturability. It is found that the line saturability decays exponentially with the increase of line length. Secondly, to detect the geographical community structure of shipping lines, the Label Propagation Algorithm with compression of Flow (LPAF) and Multi-Dimensional Scaling (MDS) method are employed, which show rather consistent communities. Lastly, to analyze the redundancy property of shipping lines of different marine companies, the multilayer networks are constructed by aggregating the shipping lines of different marine companies. It is observed that the topological quantities, such as average degree, average clustering coefficient, etc., increase smoothly when marine companies are randomly merged (randomly choose two marine companies, then merge the shipping lines of them together), while the relative entropy decreases when the merging sequence is determined by the Jensen-Shannon distance (choose two marine companies when the Jensen-Shannon distance between them is the lowest). This indicates the low redundancy of shipping lines among different marine companies.

Fitness cost of reassortment in human influenza.

PubMed

Villa, Mara; Lässig, Michael

2017-11-01

Reassortment, which is the exchange of genome sequence between viruses co-infecting a host cell, plays an important role in the evolution of segmented viruses. In the human influenza virus, reassortment happens most frequently between co-existing variants within the same lineage. This process breaks genetic linkage and fitness correlations between viral genome segments, but the resulting net effect on viral fitness has remained unclear. In this paper, we determine rate and average selective effect of reassortment processes in the human influenza lineage A/H3N2. For the surface proteins hemagglutinin and neuraminidase, reassortant variants with a mean distance of at least 3 nucleotides to their parent strains get established at a rate of about 10-2 in units of the neutral point mutation rate. Our inference is based on a new method to map reassortment events from joint genealogies of multiple genome segments, which is tested by extensive simulations. We show that intra-lineage reassortment processes are, on average, under substantial negative selection that increases in strength with increasing sequence distance between the parent strains. The deleterious effects of reassortment manifest themselves in two ways: there are fewer reassortment events than expected from a null model of neutral reassortment, and reassortant strains have fewer descendants than their non-reassortant counterparts. Our results suggest that influenza evolves under ubiquitous epistasis across proteins, which produces fitness barriers against reassortment even between co-circulating strains within one lineage.

Implication of the cause of differences in 3D structures of proteins with high sequence identity based on analyses of amino acid sequences and 3D structures.

PubMed

Matsuoka, Masanari; Sugita, Masatake; Kikuchi, Takeshi

2014-09-18

Proteins that share a high sequence homology while exhibiting drastically different 3D structures are investigated in this study. Recently, artificial proteins related to the sequences of the GA and IgG binding GB domains of human serum albumin have been designed. These artificial proteins, referred to as GA and GB, share 98% amino acid sequence identity but exhibit different 3D structures, namely, a 3α bundle versus a 4β + α structure. Discriminating between their 3D structures based on their amino acid sequences is a very difficult problem. In the present work, in addition to using bioinformatics techniques, an analysis based on inter-residue average distance statistics is used to address this problem. It was hard to distinguish which structure a given sequence would take only with the results of ordinary analyses like BLAST and conservation analyses. However, in addition to these analyses, with the analysis based on the inter-residue average distance statistics and our sequence tendency analysis, we could infer which part would play an important role in its structural formation. The results suggest possible determinants of the different 3D structures for sequences with high sequence identity. The possibility of discriminating between the 3D structures based on the given sequences is also discussed.

How wide is a road? The association of roads and mass-wasting in a forested montane environment

USGS Publications Warehouse

Larsen, M.C.; Parks, J.E.

1997-01-01

A spatial data base of 1609 landslides was analysed using a geographic information system to determine landslide frequency in relation to highways. A 126 km long transportation network in a 201km2 area of humid-tropical, mountainous, forested terrain in Puerto Rico was used in conjunction with a series of 20 buffer (disturbance) zones varying from 5 to 400m in length, measured perpendicular to the highways. Average landslide frequency in the study area at distances greater than 85m from roads was about six landslides per square kilometre. At distances of 85m or less on either side of a highway, landslide frequency was about 30 landslides per square kilometre. On average, this elevated disturbance rate affected 330m2km-2a-1 within the 170m swath. The mass-wasting rate outside of the disturbance zone affected 40m2km-2 a-1. These results indicate that the rate of mass-wasting disturbance is increased from five to eight times in a 170m wide swath along road corridors. The lateral extent of the environmental impact of roads in the study area is greater than is commonly perceived. The approach described herein demonstrates a simple method to assess the spatial association of mass-wasting with highways. ?? 1997 by John Wiley & Sons, Ltd.

The VMC survey - XXVI. Structure of the Small Magellanic Cloud from RR Lyrae stars

NASA Astrophysics Data System (ADS)

Muraveva, T.; Subramanian, S.; Clementini, G.; Cioni, M.-R. L.; Palmer, M.; van Loon, J. Th.; Moretti, M. I.; de Grijs, R.; Molinaro, R.; Ripepi, V.; Marconi, M.; Emerson, J.; Ivanov, V. D.

2018-01-01

We present results from the analysis of 2997 fundamental mode RR Lyrae variables located in the Small Magellanic Cloud (SMC). For these objects, near-infrared time series photometry from the VISTA survey of the Magellanic Clouds system (VMC) and visual light curves from the OGLE IV (Optical Gravitational Lensing Experiment IV) survey are available. In this study, the multi-epoch Ks-band VMC photometry was used for the first time to derive intensity-averaged magnitudes of the SMC RR Lyrae stars. We determined individual distances to the RR Lyrae stars from the near-infrared period-absolute magnitude-metallicity (PM_{K_s}Z) relation, which has some advantages in comparison with the visual absolute magnitude-metallicity (MV-[Fe/H]) relation, such as a smaller dependence of the luminosity on interstellar extinction, evolutionary effects and metallicity. The distances we have obtained were used to study the three-dimensional structure of the SMC. The distribution of the SMC RR Lyrae stars is found to be ellipsoidal. The actual line-of-sight depth of the SMC is in the range 1-10 kpc, with an average depth of 4.3 ± 1.0 kpc. We found that RR Lyrae stars in the eastern part of the SMC are affected by interactions of the Magellanic Clouds. However, we do not see a clear bimodality observed for red clump stars, in the distribution of RR Lyrae stars.

Optimal migration energetics of humpback whales and the implications of disturbance.

PubMed

Braithwaite, Janelle E; Meeuwig, Jessica J; Hipsey, Matthew R

2015-01-01

Whales migrate long distances and reproduce on a finite store of energy. Budgeting the use of this limited energy reserve is an important factor to ensure survival over the period of migration and to maximize reproductive investment. For some whales, migration routes are closely associated with coastal areas, exposing animals to high levels of human activity. It is currently unclear how various forms of human activity may disturb whales during migration, how this might impact their energy balance and how this could translate into long-term demographic changes. Here, we develop a theoretical bioenergetic model for migrating humpback whales to investigate the optimal migration strategy that minimizes energy use. The average migration velocity was an important driver of the total energy used by a whale, and an optimal velocity of 1.1 m s(-1) was determined. This optimal velocity is comparable to documented observed migration speeds, suggesting that whales migrate at a speed that conserves energy. Furthermore, the amount of resting time during migration was influenced by both transport costs and feeding rates. We simulated hypothetical disturbances to the optimal migration strategy in two ways, by altering average velocity to represent changes in behavioural activity and by increasing total travelled distance to represent displacement along the migration route. In both cases, disturbance increased overall energy use, with implications for the growth potential of calves.

Optimal migration energetics of humpback whales and the implications of disturbance

PubMed Central

Braithwaite, Janelle E.; Meeuwig, Jessica J.; Hipsey, Matthew R.

2015-01-01

Whales migrate long distances and reproduce on a finite store of energy. Budgeting the use of this limited energy reserve is an important factor to ensure survival over the period of migration and to maximize reproductive investment. For some whales, migration routes are closely associated with coastal areas, exposing animals to high levels of human activity. It is currently unclear how various forms of human activity may disturb whales during migration, how this might impact their energy balance and how this could translate into long-term demographic changes. Here, we develop a theoretical bioenergetic model for migrating humpback whales to investigate the optimal migration strategy that minimizes energy use. The average migration velocity was an important driver of the total energy used by a whale, and an optimal velocity of 1.1 m s−1 was determined. This optimal velocity is comparable to documented observed migration speeds, suggesting that whales migrate at a speed that conserves energy. Furthermore, the amount of resting time during migration was influenced by both transport costs and feeding rates. We simulated hypothetical disturbances to the optimal migration strategy in two ways, by altering average velocity to represent changes in behavioural activity and by increasing total travelled distance to represent displacement along the migration route. In both cases, disturbance increased overall energy use, with implications for the growth potential of calves. PMID:27293686

Two-stage damage diagnosis based on the distance between ARMA models and pre-whitening filters

NASA Astrophysics Data System (ADS)

Zheng, H.; Mita, A.

2007-10-01

This paper presents a two-stage damage diagnosis strategy for damage detection and localization. Auto-regressive moving-average (ARMA) models are fitted to time series of vibration signals recorded by sensors. In the first stage, a novel damage indicator, which is defined as the distance between ARMA models, is applied to damage detection. This stage can determine the existence of damage in the structure. Such an algorithm uses output only and does not require operator intervention. Therefore it can be embedded in the sensor board of a monitoring network. In the second stage, a pre-whitening filter is used to minimize the cross-correlation of multiple excitations. With this technique, the damage indicator can further identify the damage location and severity when the damage has been detected in the first stage. The proposed methodology is tested using simulation and experimental data. The analysis results clearly illustrate the feasibility of the proposed two-stage damage diagnosis methodology.

Pectobacterium polaris sp. nov., isolated from potato (Solanum tuberosum).

PubMed

Dees, Merete Wiken; Lysøe, Erik; Rossmann, Simeon; Perminow, Juliana; Brurberg, May Bente

2017-12-01

The genus Pectobacterium, which belongs to the bacterial family Enterobacteriaceae, contains numerous species that cause soft rot diseases in a wide range of plants. The species Pectobacterium carotovorum is highly heterogeneous, indicating a need for re-evaluation and a better classification of the species. PacBio was used for sequencing of two soft-rot-causing bacterial strains (NIBIO1006 T and NIBIO1392), initially identified as P. carotovorumstrains by fatty acid analysis and sequencing of three housekeeping genes (dnaX, icdA and mdh). Their taxonomic relationship to other Pectobacterium species was determined and the distance from any described species within the genus Pectobacterium was less than 94 % average nucleotide identity (ANI). Based on ANI, phylogenetic data and genome-to-genome distance, strains NIBIO1006 T , NIBIO1392 and NCPPB3395 are suggested to represent a novel species of the genus Pectobacterium, for which the name Pectobacterium polaris sp. nov. is proposed. The type strain is NIBIO1006 T (=DSM 105255 T =NCPPB 4611 T ).

Features of the energy structure of acoustic fields in the ocean with two-dimensional random inhomogeneities

NASA Astrophysics Data System (ADS)

Gulin, O. E.; Yaroshchuk, I. O.

2017-03-01

The paper is devoted to the analytic study and numerical simulation of mid-frequency acoustic signal propagation in a two-dimensional inhomogeneous random shallow-water medium. The study was carried out by the cross section method (local modes). We present original theoretical estimates for the behavior of the average acoustic field intensity and show that at different distances, the features of propagation loss behavior are determined by the intensity of fluctuations and their horizontal scale and depend on the initial regular parameters, such as the emission frequency and size of sound losses in the bottom. We establish analytically that for the considered waveguide and sound frequency parameters, mode coupling effect has a local character and weakly influences the statistics. We establish that the specific form of the spatial spectrum of sound velocity inhomogeneities for the statistical patterns of the field intensity is insignificant during observations in the range of shallow-water distances of practical interest.

Children's Glasses

NASA Astrophysics Data System (ADS)

Akerskog, Gunnar; Soderlund, Jan

1980-07-01

There is a common opinion among eye specialists and opticians that children's glasses often are not shaped for optimal fitting. A fundamental reason for this is the lack of data for the shaping of the bows, with the result that most children's glasses are reduced copies of adult's glasses. This report describes a photogrammetric method for collection of primary data for manufac-turing bows for children. An ordinary amateur camera was equipped with a stereo-adapter. With a few arrangements, such as projecting a pattern on the face and keeping the hair away from the ears, 600 children were photographed. A calibration photograph was exposed at the beginning and end of each film or when the equipment had been transported or otherwise disturbed. The photographs were measured in a stereocomparator and the coordinates analytically corrected for distortion. After determination of model coordinates the requested geometric information, such as pupillar distance, eye-ear distance, location of the bridge of the nose etc, was calculated. The shapes of average noses were presented as profile plots.

Active laser ranging with frequency transfer using frequency comb

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hongyuan; Wei, Haoyun; Yang, Honglei

2016-05-02

A comb-based active laser ranging scheme is proposed for enhanced distance resolution and a common time standard for the entire system. Three frequency combs with different repetition rates are used as light sources at the two ends where the distance is measured. Pulse positions are determined through asynchronous optical sampling and type II second harmonic generation. Results show that the system achieves a maximum residual of 379.6 nm and a standard deviation of 92.9 nm with 2000 averages over 23.6 m. Moreover, as for the frequency transfer, an atom clock and an adjustable signal generator, synchronized to the atom clock, are used asmore » time standards for the two ends to appraise the frequency deviation introduced by the proposed system. The system achieves a residual fractional deviation of 1.3 × 10{sup −16} for 1 s, allowing precise frequency transfer between the two clocks at the two ends.« less

An improved ELF/VLF method for globally geolocating sprite-producing lightning

NASA Astrophysics Data System (ADS)

Price, Colin; Asfur, Mustafa; Lyons, Walter; Nelson, Thomas

2002-02-01

The majority of sprites, the most common of transient luminous events (TLEs) in the upper atmosphere, are associated with a sub-class of positive cloud-to-ground lightning flashes (+CGs) whose characteristics are slowly being revealed. These +CGs produce extremely low frequency (ELF) and very low frequency (VLF) radiation detectable at great distances from the parent thunderstorm. During the STEPS field program in the United States, ELF/VLF transients associated with sprites were detected in the Negev Desert, Israel, some 11,000 km away. Within a two-hour period on 4 July 2000, all of the sprites detected optically in the United States produced detectable ELF/VLF transients in Israel. All of these transients were of positive polarity (representing positive lightning). Using the VLF data to obtain the azimuth of the transients, and the ELF data to calculate the distance between the source and receiver, we remotely determined the position of the sprite-forming lightning with an average locational error of 184 km (error of 1.6%).

Organically bound tritium (OBT) for various plants in the vicinity of a continuous atmospheric tritium release.

PubMed

Vichot, L; Boyer, C; Boissieux, T; Losset, Y; Pierrat, D

2008-10-01

In order to quantify tritium impact on the environmental, we studied vegetation continuously exposed to a tritiated atmosphere. We chose lichens as bio-indicators, trees for determination of past tritium releases of the Valduc Centre, and lettuce as edible vegetables for dose calculation regarding neighbourhood. The Pasquill and Doury models from the literature were tested to estimate tritium concentration in the air around vegetable for distance from the release point less than 500 m. The results in tree rings show that organically bound tritium (OBT) concentration was strongly correlated with tritium releases. Using the GASCON model, the modelled variation of OBT concentration with distance was correlated with the measurements. Although lichens are recognized as bio-indicators, our experiments show that they were not convenient for environmental surveys because their age is not definitive. Thus, tritium integration time cannot be precisely determined. Furthermore, their biological metabolism is not well known and tritium concentration appears to be largely dependent on species. An average conversion rate of HTO to OBT was determined for lettuce of about 0.20-0.24% h(-1). Nevertheless, even if it is equivalent to values already published in the literature for other vegetation, we have shown that this conversion rate, established by weekly samples, varies by a factor of 10 during the different stages of lettuce development, and that its variation is linked to the biomass derivative.

Metallicity mapping of the Milky Way

NASA Astrophysics Data System (ADS)

Scowcroft, Vicky; Madore, Barry; Freedman, Wendy; Monson, Andy; Persson, Eric; Seibert, Mark; Rigby, Jane; Bersier, David; Stetson, Peter; Sturch, Laura

2011-05-01

We have discovered that the mid-infrared [3.6]-[4.5] colors of long-period Cepeids are dominated by a metallicity and temperature sensitive carbon monoxide feature that is squarely situated inside of the 4.5mu bandpass. The [3.6] photometry is unaffected by the CO and its PL relation can deliver distances to Cepheids that are individually good to ±4%. We will use the time-averaged 3.6um photometry of the 120 longest -period Galactic Cepheids to map the spiral structure of the Milky Way out to a radius 6 kpc around the solar neighborhood, and we will then use the [3.6]-[4.5] colors to derive spectroscopic-quality metallicities for each of these Cepheids. This will alow us to measure the radial gradient of metals in the galaxy and to explore its variance at fixed radius. For Cepheids with phased radial-velocity coverage we will for the first time apply the Baade-Wesselink methodology in the mid-infrared for determining the absolute luminosities (and distances) of these Cepheids. These determinations will greatly enhance the precision calibration of the slope, zero point and width of the Cepheid Period-Luminosity relation, well in advance of GAIA (whose nominal mission end is 2017). However, once GAIA has determined direct parallaxes to these same long-period Cepheids we will immediately be in a position to make the necessary intercomparisons and explore the physical consequences.

Solution for a bipartite Euclidean traveling-salesman problem in one dimension

NASA Astrophysics Data System (ADS)

Caracciolo, Sergio; Di Gioacchino, Andrea; Gherardi, Marco; Malatesta, Enrico M.

2018-05-01

The traveling-salesman problem is one of the most studied combinatorial optimization problems, because of the simplicity in its statement and the difficulty in its solution. We characterize the optimal cycle for every convex and increasing cost function when the points are thrown independently and with an identical probability distribution in a compact interval. We compute the average optimal cost for every number of points when the distance function is the square of the Euclidean distance. We also show that the average optimal cost is not a self-averaging quantity by explicitly computing the variance of its distribution in the thermodynamic limit. Moreover, we prove that the cost of the optimal cycle is not smaller than twice the cost of the optimal assignment of the same set of points. Interestingly, this bound is saturated in the thermodynamic limit.

Solution for a bipartite Euclidean traveling-salesman problem in one dimension.

PubMed

Caracciolo, Sergio; Di Gioacchino, Andrea; Gherardi, Marco; Malatesta, Enrico M

2018-05-01

The traveling-salesman problem is one of the most studied combinatorial optimization problems, because of the simplicity in its statement and the difficulty in its solution. We characterize the optimal cycle for every convex and increasing cost function when the points are thrown independently and with an identical probability distribution in a compact interval. We compute the average optimal cost for every number of points when the distance function is the square of the Euclidean distance. We also show that the average optimal cost is not a self-averaging quantity by explicitly computing the variance of its distribution in the thermodynamic limit. Moreover, we prove that the cost of the optimal cycle is not smaller than twice the cost of the optimal assignment of the same set of points. Interestingly, this bound is saturated in the thermodynamic limit.

Evaluation of gas well setback policy in the Marcellus Shale region of Pennsylvania in relation to emissions of fine particulate matter.

PubMed

Banan, Zoya; Gernand, Jeremy M

2018-04-18

Shale gas has become an important strategic energy source with considerable potential economic benefits and the potential to reduce greenhouse gas emissions in so far as it displaces coal use. However, there still exist environmental health risks caused by emissions from exploration and production activities. In the United States, states and localities have set different minimum setback policies to reduce the health risks corresponding to the emissions from these locations, but it is unclear whether these policies are sufficient. This study uses a Gaussian plume model to evaluate the probability of exposure exceedance from EPA concentration limits for PM2.5 at various locations around a generic wellsite in the Marcellus shale region. A set of meteorological data monitored at ten different stations across Marcellus shale gas region in Pennsylvania during 2015 serves as an input to this model. Results indicate that even though the current setback distance policy in Pennsylvania (500 ft. or 152.4 m) might be effective in some cases, exposure limit exceedance occurs frequently at this distance with higher than average emission rates and/or greater number of wells per wellpad. Setback distances should be 736 m to ensure compliance with the daily average concentration of PM2.5, and a function of the number of wells to comply with the annual average PM2.5 exposure standard. The Marcellus Shale gas is known as a significant source of criteria pollutants and studies show that the current setback distance in Pennsylvania is not adequate to protect the residents from exceeding the established limits. Even an effective setback distance to meet the annual exposure limit may not be adequate to meet the daily limit. The probability of exceeding the annual limit increases with number of wells per site. We use a probabilistic dispersion model to introduce a technical basis to select appropriate setback distances.

Walking, cycling and transport safety: an analysis of child road deaths.

PubMed

Sonkin, Beth; Edwards, Phil; Roberts, Ian; Green, Judith

2006-08-01

To examine trends in road death rates for child pedestrians, cyclists and car occupants. Analysis of road traffic injury death rates per 100 000 children and death rates per 10 million passenger miles travelled. England and Wales between 1985 and 2003. Children aged 0-14 years. None. Death rates per 100,000 children and per 10 million child passenger miles for pedestrians, cyclists and car occupants. Death rates per head of population have declined for child pedestrians, cyclists and car occupants but pedestrian death rates remain higher (0.55 deaths/100,000 children; 95% confidence interval [CI] 0.42 to 0.72 deaths) than those for car occupants (0.34 deaths; 95% CI 0.23 to 0.48 deaths) and cyclists (0.16 deaths; 95% CI 0.09 to 0.27 deaths). Since 1985, the average distance children travelled as a car occupant has increased by 70%; the average distance walked has declined by 19%; and the average distance cycled has declined by 58%. Taking into account distance travelled, there are about 50 times more child cyclist deaths (0.55 deaths/10 million passenger miles; 0.32 to 0.89) and nearly 30 times more child pedestrian deaths (0.27 deaths; 0.20 to 0.35) than there are deaths to child car occupants (0.01 deaths; 0.007 to 0.014). In 2003, children from families without access to a vehicle walked twice the distance walked by children in families with access to two or more vehicles. More needs to be done to reduce the traffic injury death rates for child pedestrians and cyclists. This might encourage more walking and cycling and also has the potential to reduce social class gradients in injury mortality.

Changes in Contributions of Swimming, Cycling, and Running Performances on Overall Triathlon Performance Over a 26-Year Period.

PubMed

Figueiredo, Pedro; Marques, Elisa A; Lepers, Romuald

2016-09-01

Figueiredo, P, Marques, EA, and Lepers, R. Changes in contributions of swimming, cycling, and running performances on overall triathlon performance over a 26-year period. J Strength Cond Res 30(9): 2406-2415, 2016-This study examined the changes in the individual contribution of each discipline to the overall performance of Olympic and Ironman distance triathlons among men and women. Between 1989 and 2014, overall performances and their component disciplines (swimming, cycling and running) were analyzed from the top 50 overall male and female finishers. Regression analyses determined that for the Olympic distance, the split times in swimming and running decreased over the years (r = 0.25-0.43, p ≤ 0.05), whereas the cycling split and total time remained unchanged (p > 0.05), for both sexes. For the Ironman distance, the cycling and running splits and the total time decreased (r = 0.19-0.88, p ≤ 0.05), whereas swimming time remained stable, for both men and women. The average contribution of the swimming stage (∼18%) was smaller than the cycling and running stages (p ≤ 0.05), for both distances and both sexes. Running (∼47%) and then cycling (∼36%) had the greatest contribution to overall performance for the Olympic distance (∼47%), whereas for the Ironman distance, cycling and running presented similar contributions (∼40%, p > 0.05). Across the years, in the Olympic distance, swimming contribution significantly decreased for women and men (r = 0.51 and 0.68, p < 0.001, respectively), whereas running increased for men (r = 0.33, p = 0.014). In the Ironman distance, swimming and cycling contributions changed in an undulating fashion, being inverse between the two segments, for both sexes (p < 0.01), whereas running contribution decreased for men only (r = 0.61, p = 0.001). These findings highlight that strategies to improve running performance should be the main focus on the preparation to compete in the Olympic distance; whereas, in the Ironman, both cycling and running are decisive and should be well developed.

Phenological differences among selected residents and long-distance migrant bird species in central Europe

NASA Astrophysics Data System (ADS)

Bartošová, Lenka; Trnka, Miroslav; Bauer, Zdeněk; Možný, Martin; Štěpánek, Petr; Žalud, Zdeněk

2014-07-01

The phenological responses to climate of residents and migrants (short- and long-distance) differ. Although few previous studies have focussed on this topic, the agree that changes in phenology are more apparent for residents than for long-distance migrants. We analysed the breeding times of two selected residents ( Sitta europaea, Parus major) and one long-distance migrant ( Ficedula albicollis) from 1961 to 2007 in central Europe. The timing of the phenophases of all three bird species showed a significant advance to earlier times. Nevertheless, the most marked shift was observed for the long-distance migrant (1.9 days per decade on average in mean laying date with linearity at the 99.9 % confidence level). In contrast, the shifts shown by the residents were smaller (1.6 days for S. europaea and 1.5 days for P. major also on average in mean laying date for both, with linearity at the 95 % confidence level). Spearman rank correlation coefficients calculated for pairs of phenophases of given bird species in 20-year subsamples (e.g. 1961-1980, 1962-1981) showed higher phenological separation between the residents and the migrant. This separation is most apparent after the 1980s. Thus, our results indicate that the interconnections between the studied phenological stages of the three bird species are becoming weaker.

Precipitation in a lead calcium tin anode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perez-Gonzalez, Francisco A., E-mail: fco.aurelio@inbox.com; Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, Universidad Autonoma de Nuevo Leon; Camurri, Carlos G., E-mail: ccamurri@udec.cl

Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 Degree-Sign C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn{sub 3} particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitatesmore » and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: Black-Right-Pointing-Pointer The distance between precipitates in a lead alloy is recorded. Black-Right-Pointing-Pointer The relationship between the distance and the cooling rate is established. Black-Right-Pointing-Pointer It is found that the strengthening of the alloy depends on the distance between precipitates.« less

Tracer-Test Planning Using the Efficient Hydrologic Tracer ...

EPA Pesticide Factsheets

Hydrological tracer testing is the most reliable diagnostic technique available for establishing flow trajectories and hydrologic connections and for determining basic hydraulic and geometric parameters necessary for establishing operative solute-transport processes. Tracer-test design can be difficult because of a lack of prior knowledge of the basic hydraulic and geometric parameters desired and the appropriate tracer mass to release. A new efficient hydrologic tracer-test design (EHTD) methodology has been developed that combines basic measured field parameters (e.g., discharge, distance, cross-sectional area) in functional relationships that describe solute-transport processes related to flow velocity and time of travel. The new method applies these initial estimates for time of travel and velocity to a hypothetical continuously stirred tank reactor as an analog for the hydrologic flow system to develop initial estimates for tracer concentration and axial dispersion, based on a preset average tracer concentration. Root determination of the one-dimensional advection-dispersion equation (ADE) using the preset average tracer concentration then provides a theoretical basis for an estimate of necessary tracer mass.Application of the predicted tracer mass with the hydraulic and geometric parameters in the ADE allows for an approximation of initial sample-collection time and subsequent sample-collection frequency where a maximum of 65 samples were determined to be

EFFICIENT HYDROLOGICAL TRACER-TEST DESIGN (EHTD ...

EPA Pesticide Factsheets

Hydrological tracer testing is the most reliable diagnostic technique available for establishing flow trajectories and hydrologic connections and for determining basic hydraulic and geometric parameters necessary for establishing operative solute-transport processes. Tracer-test design can be difficult because of a lack of prior knowledge of the basic hydraulic and geometric parameters desired and the appropriate tracer mass to release. A new efficient hydrologic tracer-test design (EHTD) methodology has been developed that combines basic measured field parameters (e.g., discharge, distance, cross-sectional area) in functional relationships that describe solute-transport processes related to flow velocity and time of travel. The new method applies these initial estimates for time of travel and velocity to a hypothetical continuously stirred tank reactor as an analog for the hydrologic flow system to develop initial estimates for tracer concentration and axial dispersion, based on a preset average tracer concentration. Root determination of the one-dimensional advection-dispersion equation (ADE) using the preset average tracer concentration then provides a theoretical basis for an estimate of necessary tracer mass.Application of the predicted tracer mass with the hydraulic and geometric parameters in the ADE allows for an approximation of initial sample-collection time and subsequent sample-collection frequency where a maximum of 65 samples were determined to

Research on Signature Verification Method Based on Discrete Fréchet Distance

NASA Astrophysics Data System (ADS)

Fang, J. L.; Wu, W.

2018-05-01

This paper proposes a multi-feature signature template based on discrete Fréchet distance, which breaks through the limitation of traditional signature authentication using a single signature feature. It solves the online handwritten signature authentication signature global feature template extraction calculation workload, signature feature selection unreasonable problem. In this experiment, the false recognition rate (FAR) and false rejection rate (FRR) of the statistical signature are calculated and the average equal error rate (AEER) is calculated. The feasibility of the combined template scheme is verified by comparing the average equal error rate of the combination template and the original template.

Head restraint backset during routine automobile driving: drivers usually exceed the recommended guidelines.

PubMed

Shugg, Jarrod A J; Vernest, Kyle; Dickey, James P

2011-04-01

Although several previous studies have evaluated horizontal head restraint backset distances, few studies have evaluated them during driving. The purpose of this study was to measure this backset during routine automobile driving and to specifically evaluate the backset during individual driving tasks such as turning, stopping, starting, and lane changes. Fourteen subjects drove around a specified route through the city of Guelph, Ontario, Canada, that included residential, thruway, and highway driving; additional minor driving tasks, such as lane changes, were evaluated. The distance of head restraint to posterior aspect of the head was measured continuously throughout the drive using an ultrasonic measurement system. The timing of specific tasks was documented using a video camera. The average head-to-restraint distance throughout the driving route was 78.1 mm (standard deviation [SD] 24.8 mm); this distance did not vary significantly between the global measures during various driving areas (residential, thruway, and highway). We observed that the head restraint backsets during right turns (93.6 mm; SD 34.8 mm) were significantly larger compared to the other driving tasks (p < .001). The 7 males and 7 females showed similar backset distances: 84.52 mm (SD 12.08) and 71.68 mm (SD 5.53), respectively (p = .0785). We observed that most subjects maintain a relatively consistent head-to-restraint distance throughout their driving route; 2 subjects adopted very large head restraint backset distances throughout their drive and 2 others adopted very small head restraint backset distances-this appears to reflect driver posture. Twelve of 14 subjects had average backset distances that exceed the National Highway Traffic Safety Administration and the Federal Motor Vehicle Safety Standard guidelines, indicating that most drivers may be at risk for whiplash-like disorders if exposed to a rear impact while driving. Of the monitored driving tasks, turning, especially right turns, caused drivers to increase their head-to-restraint backset distance.

Initial Observations of Lingual Movement Characteristics of Children With Cerebral Palsy

PubMed Central

Arias, Carlos R.; Morita, Kristen; Richardson, Hannah

2017-01-01

Purpose This preliminary study compared the speech motor control of the tongue and jaw between children with cerebral palsy (CP) and their typically developing (TD) peers. Method Tongue tip and jaw movements of 4 boys with spastic CP and 4 age- and sex-matched TD peers were recorded using an electromagnetic articulograph during 10 repetitions of “Dad told stories today.” The duration, path distance, average speed, and speech movement stability of the movements were calculated for each repetition. Results The children with CP had longer durations than their TD peers. Children with CP had longer path distances and faster average speed as compared with their TD peers for both articulators. The TD group but not the CP group had longer path distances and faster average speeds for the tongue than the jaw. The CP group had reduced speech movement stability for the tongue as compared with their TD peers, but both groups had similar speech movement stability for the jaw. Conclusions Children with CP had impaired speech motor control of the tongue and jaw as compared with their TD peers, and these speech motor control deficits were more pronounced in the tongue tip than the jaw. PMID:28655047

Light propagation in Swiss-cheese models of random close-packed Szekeres structures: Effects of anisotropy and comparisons with perturbative results

NASA Astrophysics Data System (ADS)

Koksbang, S. M.

2017-03-01

Light propagation in two Swiss-cheese models based on anisotropic Szekeres structures is studied and compared with light propagation in Swiss-cheese models based on the Szekeres models' underlying Lemaitre-Tolman-Bondi models. The study shows that the anisotropy of the Szekeres models has only a small effect on quantities such as redshift-distance relations, projected shear and expansion rate along individual light rays. The average angular diameter distance to the last scattering surface is computed for each model. Contrary to earlier studies, the results obtained here are (mostly) in agreement with perturbative results. In particular, a small negative shift, δ DA≔D/A-DA ,b g DA ,b g , in the angular diameter distance is obtained upon line-of-sight averaging in three of the four models. The results are, however, not statistically significant. In the fourth model, there is a small positive shift which has an especially small statistical significance. The line-of-sight averaged inverse magnification at z =1100 is consistent with 1 to a high level of confidence for all models, indicating that the area of the surface corresponding to z =1100 is close to that of the background.

Zero-point corrections and temperature dependence of HD spin-spin coupling constants of heavy metal hydride and dihydrogen complexes calculated by vibrational averaging.

PubMed

Mort, Brendan C; Autschbach, Jochen

2006-08-09

Vibrational corrections (zero-point and temperature dependent) of the H-D spin-spin coupling constant J(HD) for six transition metal hydride and dihydrogen complexes have been computed from a vibrational average of J(HD) as a function of temperature. Effective (vibrationally averaged) H-D distances have also been determined. The very strong temperature dependence of J(HD) for one of the complexes, [Ir(dmpm)Cp*H2]2 + (dmpm = bis(dimethylphosphino)methane) can be modeled simply by the Boltzmann average of the zero-point vibrationally averaged JHD of two isomers. For this complex and four others, the vibrational corrections to JHD are shown to be highly significant and lead to improved agreement between theory and experiment in most cases. The zero-point vibrational correction is important for all complexes. Depending on the shape of the potential energy and J-coupling surfaces, for some of the complexes higher vibrationally excited states can also contribute to the vibrational corrections at temperatures above 0 K and lead to a temperature dependence. We identify different classes of complexes where a significant temperature dependence of J(HD) may or may not occur for different reasons. A method is outlined by which the temperature dependence of the HD spin-spin coupling constant can be determined with standard quantum chemistry software. Comparisons are made with experimental data and previously calculated values where applicable. We also discuss an example where a low-order expansion around the minimum of a complicated potential energy surface appears not to be sufficient for reproducing the experimentally observed temperature dependence.

Alteration of travel patterns with vision loss from glaucoma and macular degeneration.

PubMed

Curriero, Frank C; Pinchoff, Jessie; van Landingham, Suzanne W; Ferrucci, Luigi; Friedman, David S; Ramulu, Pradeep Y

2013-11-01

The distance patients can travel outside the home influences how much of the world they can sample and to what extent they can live independently. Recent technological advances have allowed travel outside the home to be directly measured in patients' real-world routines. To determine whether decreased visual acuity (VA) from age-related macular degeneration (AMD) and visual field (VF) loss from glaucoma are associated with restricted travel patterns in older adults. Cross-sectional study. Patients were recruited from an eye clinic, while travel patterns were recorded during their real-world routines using a cellular tracking device. Sixty-one control subjects with normal vision, 84 subjects with glaucoma with bilateral VF loss, and 65 subjects with AMD with bilateral or severe unilateral loss of VA had their location tracked every 15 minutes between 7 am and 11 pm for 7 days using a tracking device. Average daily excursion size (defined as maximum distance away from home) and average daily excursion span (defined as maximum span of travel) were defined for each individual. The effects of vision loss on travel patterns were evaluated after controlling for individual and geographic factors. In multivariable models comparing subjects with AMD and control subjects, average excursion size and span decreased by approximately one-quarter mile for each line of better-eye VA loss (P ≤ .03 for both). Similar but not statistically significant associations were observed between average daily excursion size and span for severity of better-eye VF loss in subjects with glaucoma and control subjects. Being married or living with someone and younger age were associated with more distant travel, while less-distant travel was noted for older individuals, African Americans, and those living in more densely populated regions. Age-related macular degeneration-related loss of VA, but not glaucoma-related loss of VF, is associated with restriction of travel to more nearby locations. This constriction of life space may impact quality of life and restrict access to services.

[Influence of road on breeding habitat of Nipponia nippon based on MaxEnt model].

PubMed

Zhang, Hui; Gao, Ji Xi; Ma, Meng Xiao; Shao, Fang Ze; Wang, Qiao; Li, Guang Yu; Qiu, Jie; Zhou, Ke Xin

2017-04-18

Quantitative study on effects of roads on suitable breeding habitats of wildlife is one of topics that need in-depth research in road ecology. Crested ibis (Nipponia nippon), a first class nationally protected bird species, is the species of interest in this research. Using the Maximum Entropy Models (MaxEnt) in the Species Distribution Model (SDM) toolbox of ArcGIS, autocorrelation of environmental variables were analyzed and environmental variables with r>0.8 were removed. Ten environmental variables were chosen as impact factors for the breeding habitat of crested ibis, including mean temperature of coldest quarter, landscape type, normalized difference vegetation index(NDVI), slope, aspect, distance to waters, distance to paddy field, distance to high-grade roads (expressway, national way, provincial way), and distance to low-grade roads (country road). By analyzing the contribution rate of each environmental variable, the results showed that the mean temperature of coldest quarter, landscape type, distance to paddy field, and distance to high-grade roads were the main factors determining breeding habitat of crested ibis. The suitable distribution of crested ibis' nesting area was under the following scenarios: variable road present (scenario1), high-grade road absent (scenario2), and low-grade road absent (scenario 3). The results showed that the presence of roads affected suitable nesting areas of crested ibis with high-grade roads showing a larger influence than low-grade roads. The presence of high-grade roads and low-grade roads decreased the suitable nesting areas of crested ibis by 66.23 and 35.69 km 2 , respectively. The crested ibis preferred to nest in areas distant from high-grade roads, with an average road avoidance distance of 1500 m. This study was of great significance for formulating management measures to protect crested ibis and provide a reference for quantitative assessment on impacts of engineering and construction projects on wildlife.

Genomic Diversity in Pig (Sus scrofa) and its Comparison with Human and other Livestock

PubMed Central

Zhang, Chunyan; Plastow, Graham

2011-01-01

We have reviewed the current pig (Sus scrofa) genomic diversity within and between sites and compared them with human and other livestock. The current Porcine 60K single nucleotide polymorphism (SNP) panel has an average SNP distance in a range of 30 - 40 kb. Most of genetic variation was distributed within populations, and only a small proportion of them existed between populations. The average heterozygosity was lower in pig than in human and other livestock. Genetic inbreeding coefficient (FIS), population differentiation (FST), and Nei’s genetic distance between populations were much larger in pig than in human and other livestock. Higher average genetic distance existed between European and Asian populations than between European or between Asian populations. Asian breeds harboured much larger variability and higher average heterozygosity than European breeds. The samples of wild boar that have been analyzed displayed more extensive genetic variation than domestic breeds. The average linkage disequilibrium (LD) in improved pig breeds extended to 1 - 3 cM, much larger than that in human (~ 30 kb) and cattle (~ 100 kb), but smaller than that in sheep (~ 10 cM). European breeds showed greater LD that decayed more slowly than Asian breeds. We briefly discuss some processes for maintaining genomic diversity in pig, including migration, introgression, selection, and drift. We conclude that, due to the long time of domestication, the pig possesses lower heterozygosity, higher FIS, and larger LD compared with human and cattle. This implies that a smaller effective population size and less informative markers are needed in pig for genome wide association studies. PMID:21966252

Kinesin-microtubule interactions during gliding assays under magnetic force

NASA Astrophysics Data System (ADS)

Fallesen, Todd L.

Conventional kinesin is a motor protein capable of converting the chemical energy of ATP into mechanical work. In the cell, this is used to actively transport vesicles through the intracellular matrix. The relationship between the velocity of a single kinesin, as it works against an increasing opposing load, has been well studied. The relationship between the velocity of a cargo being moved by multiple kinesin motors against an opposing load has not been established. A major difficulty in determining the force-velocity relationship for multiple motors is determining the number of motors that are moving a cargo against an opposing load. Here I report on a novel method for detaching microtubules bound to a superparamagnetic bead from kinesin anchor points in an upside down gliding assay using a uniform magnetic field perpendicular to the direction of microtubule travel. The anchor points are presumably kinesin motors bound to the surface which microtubules are gliding over. Determining the distance between anchor points, d, allows the calculation of the average number of kinesins, n, that are moving a microtubule. It is possible to calculate the fraction of motors able to move microtubules as well, which is determined to be ˜ 5%. Using a uniform magnetic field parallel to the direction of microtubule travel, it is possible to impart a uniform magnetic field on a microtubule bound to a superparamagnetic bead. We are able to decrease the average velocity of microtubules driven by multiple kinesin motors moving against an opposing force. Using the average number of kinesins on a microtubule, we estimate that there are an average 2-7 kinesins acting against the opposing force. By fitting Gaussians to the smoothed distributions of microtubule velocities acting against an opposing force, multiple velocities are seen, presumably for n, n-1, n-2, etc motors acting together. When these velocities are scaled for the average number of motors on a microtubule, the force-velocity relationship for multiple motors follows the same trend as for one motor, supporting the hypothesis that multiple motors share the load.

Attitudes of Turkish Distance Learners toward Internet-Based Learning: An Investigation Depending on Demographical Characteristics

ERIC Educational Resources Information Center

Tekinarslan, Erkan

2008-01-01

The purpose of this study is to develop an attitude scale toward Internet-based learning (IBL) and to investigate whether attitude levels of Turkish distance learners in an IBL environment differ according to their demographical characteristics (i.e. age, gender, marital status, parental status, employment status, grade point average (GPA).…

A Classroom Note on: The Average Distance in an Ellipse

ERIC Educational Resources Information Center

Gordon, Sheldon P.

2011-01-01

This article presents an applied calculus exercise that can be easily shared with students. One of Kepler's greatest discoveries was the fact that the planets move in elliptic orbits with the sun at one focus. Astronomers characterize the orbits of particular planets by their minimum and maximum distances to the sun, known respectively as the…

Automated LSA Assessment of Summaries in Distance Education: Some Variables to Be Considered

ERIC Educational Resources Information Center

Jorge-Botana, Guillermo; Luzón, José M.; Gómez-Veiga, Isabel; Martín-Cordero, Jesús I.

2015-01-01

A latent semantic analysis-based automated summary assessment is described; this automated system is applied to a real learning from text task in a Distance Education context. We comment on the use of automated content, plagiarism, text coherence measures, and word weights average and their impact on predicting human judges summary scoring. A…

Water World Artist Concept

NASA Image and Video Library

2017-04-12

This artist's concept shows a hypothetical planet covered in water around the binary star system of Kepler-35A and B. In a 2017 study in the journal Nature Communications, researchers investigating the climates of exoplanets determined that this hypothetical planet could be habitable, depending on its distance from the two stars. On the far edge of the habitable zone, the hypothetical water-covered planet would have a lot of variation in its surface temperatures. But closer to the stars, near the inner edge of the habitable zone, the global average surface temperatures on the same planet would stay almost constant. https://photojournal.jpl.nasa.gov/catalog/PIA21470

Mercury's helium exosphere after Mariner 10's third encounter

NASA Technical Reports Server (NTRS)

Curtis, S. A.; Hartle, R. E.

1977-01-01

From Mariner 10 third encounter UV data, a value of .00045 was calculated as the fraction of the solar wind He++ flux intercepted and captured by Mercury's magnetosphere if the observed He atmosphere is maintained by the solar wind. If an internal source for He prevails, the corresponding upper bound for the global outgassing rate is estimated to be 4.5 x 10 to the 22nd power per sec. A surface temperature distribution was used which satisfies the heat equation over Mercury's entire surface using Mariner 10 determined mean surface thermal characteristics. The means stand off distance of Mercury's magnetopause averaged over Mercury's orbit was also used.

Confronting Cost and Pricing Issues in Distance Education.

ERIC Educational Resources Information Center

Taylor, Thomas H.; Parker, G. D., III; Tebeaux, Elizabeth

2001-01-01

Asserts that "the devil is in the details" when determining costs and prices for distance delivery of courses, and describes Texas A&M University's process of determining cost and price for distance education courses. (EV)

A morphometric analysis of the superior cervical ganglion and its surrounding structures.

PubMed

Fazliogullari, Zeliha; Kilic, Cenk; Karabulut, Ahmet Kagan; Yazar, Fatih

2016-04-01

The aim of this cadaveric study was to detect the superior cervical ganglion (SCG) in a topographic manner according to vertebrae and to determine the relationship between the vertebrae, mandibular angle and longus colli muscle through morphometric analysis. The present study was performed on 40 SCG of 20 human cadavers (16 males, 4 females). The level of the SCG was determined based on the vertebrae. Ganglion length, width and thickness were detected. Distance to the adjacent vertebra, the mandibular angle and medial side of the longus colli muscle were measured. The results were evaluated statistically. The SCG existing in all cadavers was detected at the C2 vertebra level in 34 cadavers and at the C3 vertebra level in 6 cadavers. The average length, width and thickness of the SCG were 15.18 ± 1.12, 4.62 ± 0.25, and 1.83 ± 0.10 mm, respectively. No statistically significant difference was detected in terms of the distances between the ganglion and anterior tubercle of transverse processes of the vertebrae as well as the mandibular angle on either side. The distance between the SCG and the medial edge of the longus colli muscle was significantly greater on the left side in both men (p < 0.001) and women (p < 0.01). Recognition of morphometric characteristics of the SCG and detection of its location according to adjacent formations may serve as a guide for nerve blockage studies and help surgeons to preserve the ganglion in both anterior and anterolateral cervical approaches.

Euclidean commute time distance embedding and its application to spectral anomaly detection

NASA Astrophysics Data System (ADS)

Albano, James A.; Messinger, David W.

2012-06-01

Spectral image analysis problems often begin by performing a preprocessing step composed of applying a transformation that generates an alternative representation of the spectral data. In this paper, a transformation based on a Markov-chain model of a random walk on a graph is introduced. More precisely, we quantify the random walk using a quantity known as the average commute time distance and find a nonlinear transformation that embeds the nodes of a graph in a Euclidean space where the separation between them is equal to the square root of this quantity. This has been referred to as the Commute Time Distance (CTD) transformation and it has the important characteristic of increasing when the number of paths between two nodes decreases and/or the lengths of those paths increase. Remarkably, a closed form solution exists for computing the average commute time distance that avoids running an iterative process and is found by simply performing an eigendecomposition on the graph Laplacian matrix. Contained in this paper is a discussion of the particular graph constructed on the spectral data for which the commute time distance is then calculated from, an introduction of some important properties of the graph Laplacian matrix, and a subspace projection that approximately preserves the maximal variance of the square root commute time distance. Finally, RX anomaly detection and Topological Anomaly Detection (TAD) algorithms will be applied to the CTD subspace followed by a discussion of their results.

Reliability and smallest real difference of the ankle lunge test post ankle fracture.

PubMed

Simondson, David; Brock, Kim; Cotton, Susan

2012-02-01

This study aimed to determine the reliability and the smallest real difference of the Ankle Lunge test in an ankle fracture patient population. In the post immobilisation stage of ankle fracture, ankle dorsiflexion is an important measure of progress and outcome. The Ankle Lunge test measures weight bearing dorsiflexion, resulting in negative scores (knee to wall distance) and positive scores (toe to wall distance), for which the latter has proven reliability in normal subjects only. A consecutive sample of ankle fracture patients with permission to commence weight bearing, were recruited to the study. Three measurements of the Ankle Lunge Test were performed each by two raters, one senior and one junior physiotherapist. These occurred prior to therapy sessions in the second week after plaster removal. A standardised testing station was utilised and allowed for both knee to wall distance and toe to wall distance measurement. Data was collected from 10 individuals with ankle fracture, with an average age of 36 years (SD 14.8). Seventy seven percent of observations were negative. Intra and inter-rater reliability yielded intra class correlations at or above 0.97, p < .001. There was a significant systematic bias towards improved scores during repeated measurement for one rater (p = .01). The smallest real difference was calculated as 13.8mm. The Ankle Lunge test is a practical and reliable tool for measuring weightbearing dorsiflexion post ankle fracture. Copyright © 2011 Elsevier Ltd. All rights reserved.

Climatological Modeling of Monthly Air Temperature and Precipitation in Egypt through GIS Techniques

NASA Astrophysics Data System (ADS)

El Kenawy, A.

2009-09-01

This paper describes a method for modeling and mapping four climatic variables (maximum temperature, minimum temperature, mean temperature and total precipitation) in Egypt using a multiple regression approach implemented in a GIS environment. In this model, a set of variables including latitude, longitude, elevation within a distance of 5, 10 and 15 km, slope, aspect, distance to the Mediterranean Sea, distance to the Red Sea, distance to the Nile, ratio between land and water masses within a radius of 5, 10, 15 km, the Normalized Difference Vegetation Index (NDVI), the Normalized Difference Water Index (NDWI), the Normalized Difference Temperature Index (NDTI) and reflectance are included as independent variables. These variables were integrated as raster layers in MiraMon software at a spatial resolution of 1 km. Climatic variables were considered as dependent variables and averaged from quality controlled and homogenized 39 series distributing across the entire country during the period of (1957-2006). For each climatic variable, digital and objective maps were finally obtained using the multiple regression coefficients at monthly, seasonal and annual timescale. The accuracy of these maps were assessed through cross-validation between predicted and observed values using a set of statistics including coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE), mean bias Error (MBE) and D Willmott statistic. These maps are valuable in the sense of spatial resolution as well as the number of observatories involved in the current analysis.

Network rhythms influence the relationship between spike-triggered local field potential and functional connectivity

PubMed Central

Maunsell, John H.R.

2012-01-01

Characterizing the functional connectivity between neurons is key for understanding brain function. We recorded spikes and local field potentials (LFP) from multi-electrode arrays implanted in monkey visual cortex to test the hypotheses that spikes generated outward traveling LFP waves and the strength of functional connectivity depended on stimulus contrast, as described recently. These hypotheses were proposed based on the observation that the latency of the peak negativity of the spike-triggered LFP average (STA) increased with distance between the spike and LFP electrodes, and the magnitude of the STA negativity and the distance over which it was observed decreased with increasing stimulus contrast. Detailed analysis of the shape of the STA, however, revealed contributions from two distinct sources – a transient negativity in the LFP locked to the spike (∼0 ms) that attenuated rapidly with distance, and a low frequency rhythm with peak negativity ∼25 ms after the spike that attenuated slowly with distance. The overall negative peak of the LFP, which combined both these components, shifted from ∼0 to ∼25 ms going from electrodes near the spike to electrodes far from the spike, giving an impression of a traveling wave, although the shift was fully explained by changing contributions from the two fixed components. The low frequency rhythm was attenuated during stimulus presentations, decreasing the overall magnitude of the STA. These results highlight the importance of accounting for the network activity while using STAs to determine functional connectivity. PMID:21880928

Altitude exposures during commercial flight: a reappraisal.

PubMed

Hampson, Neil B; Kregenow, David A; Mahoney, Anne M; Kirtland, Steven H; Horan, Kathleen L; Holm, James R; Gerbino, Anthony J

2013-01-01

Hypobaric hypoxia during commercial air travel has the potential to cause or worsen hypoxemia in individuals with pre-existing cardiopulmonary compromise. Knowledge of cabin altitude pressures aboard contemporary flights is essential to counseling patients accurately about flying safety. The objective of the study was to measure peak cabin altitudes during U.S. domestic commercial flights on a variety of aircraft. A handheld mountaineering altimeter was carried by the investigators in the plane cabin during commercial air travel and peak cabin altitude measured. The values were then compared between aircraft models, aircraft classes, and distances flown. The average peak cabin altitude on 207 flights aboard 17 different aircraft was 6341 +/- 1813 ft (1933 m +/- 553 m), significantly higher than when measured in a similar fashion in 1988. Peak cabin altitude was significantly higher for flights longer than 750 mi (7085 +/- 801 ft) compared to shorter flights (5160 +/- 2290 ft/1573 +/- 698 m). Cabin altitude increased linearly with flight distance for flights up to 750 mi in length, but was independent of flight distance for flights exceeding 750 mi. Peak cabin altitude was less than 5000 ft (1524 m) in 70% of flights shorter than 500 mi. Peak cabin altitudes greater than 8000 ft (2438 m) were measured on approximately 10% of the total flights. Peak cabin altitude on commercial aircraft flights has risen over time. Cabin altitude is lower with flights of shorter distance. Physicians should take these factors into account when determining an individual's need for supplemental oxygen during commercial air travel.

Vortex dynamics during blade-vortex interactions

NASA Astrophysics Data System (ADS)

Peng, Di; Gregory, James W.

2015-05-01

Vortex dynamics during parallel blade-vortex interactions (BVIs) were investigated in a subsonic wind tunnel using particle image velocimetry (PIV). Vortices were generated by applying a rapid pitch-up motion to an airfoil through a pneumatic system, and the subsequent interactions with a downstream, unloaded target airfoil were studied. The blade-vortex interactions may be classified into three categories in terms of vortex behavior: close interaction, very close interaction, and collision. For each type of interaction, the vortex trajectory and strength variation were obtained from phase-averaged PIV data. The PIV results revealed the mechanisms of vortex decay and the effects of several key parameters on vortex dynamics, including separation distance (h/c), Reynolds number, and vortex sense. Generally, BVI has two main stages: interaction between vortex and leading edge (vortex-LE interaction) and interaction between vortex and boundary layer (vortex-BL interaction). Vortex-LE interaction, with its small separation distance, is dominated by inviscid decay of vortex strength due to pressure gradients near the leading edge. Therefore, the decay rate is determined by separation distance and vortex strength, but it is relatively insensitive to Reynolds number. Vortex-LE interaction will become a viscous-type interaction if there is enough separation distance. Vortex-BL interaction is inherently dominated by viscous effects, so the decay rate is dependent on Reynolds number. Vortex sense also has great impact on vortex-BL interaction because it changes the velocity field and shear stress near the surface.

Deuterium REDOR: Principles and Applications for Distance Measurements

NASA Astrophysics Data System (ADS)

Sack, I.; Goldbourt, A.; Vega, S.; Buntkowsky, G.

1999-05-01

The application of short composite pulse schemes ([figure] and [figure]) to the rotational echo double-resonance (REDOR) spectroscopy ofX-2H (X: spin{1}/{2}, observed) systems with large deuterium quadrupolar interactions has been studied experimentally and theoretically and compared with simple 180° pulse schemes. The basic properties of the composite pulses on the deuterium nuclei have been elucidated, using average Hamiltonian theory, and exact simulations of the experiments have been achieved by stepwise integration of the equation of motion of the density matrix. REDOR experiments were performed on15N-2H in doubly labeled acetanilide and on13C-2H in singly2H-labeled acetanilide. The most efficient REDOR dephasing was observed when [figure] composite pulses were used. It is found that the dephasing due to simple 180° deuterium pulses is about a factor of 2 less efficient than the dephasing due to the composite pulse sequences and thus the range of couplings observable byX-2H REDOR is enlarged toward weaker couplings, i.e., larger distances. From these experiments the2H-15N dipolar coupling between the amino deuteron and the amino nitrogen and the2H-13C dipolar couplings between the amino deuteron and the α and β carbons have been elucidated and the corresponding distances have been determined. The distance data from REDOR are in good agreement with data from X-ray and neutron diffraction, showing the power of the method.

Spatial and temporal distribution of airborne Bacillus thuringiensis var. kurstaki during an aerial spray program for gypsy moth eradication.

PubMed

Teschke, K; Chow, Y; Bartlett, K; Ross, A; van Netten, C

2001-01-01

We measured airborne exposures to the biological insecticide Bacillus thuringiensis var. kurstaki (Btk) during an aerial spray program to eradicate gypsy moths on the west coast of Canada. We aimed to determine whether staying indoors during spraying reduced exposures, to determine the rate of temporal decay of airborne concentrations, and to determine whether drift occurred outside the spray zone. During spraying, the average culturable airborne Btk concentration measured outdoors within the spray zone was 739 colony-forming units (CFU)/m3 of air. Outdoor air concentrations decreased over time, quickly in an initial phase with a half time of 3.3 hr, and then more slowly over the following 9 days, with an overall half-time of about 2.4 days. Inside residences during spraying, average concentrations were initially 2-5 times lower than outdoors, but at 5-6 hr after spraying began, indoor concentrations exceeded those outdoors, with an average of 244 CFU/m3 vs. 77 CFU/m3 outdoors, suggesting that the initial benefits of remaining indoors during spraying may not persist as outside air moves indoors with normal daily activities. There was drift of culturable Btk throughout a 125- to 1,000-meter band outside the spray zone where measurements were made, a consequence of the fine aerosol sizes that remained airborne (count median diameters of 4.3 to 7.2 microm). Btk concentrations outside the spray zone were related to wind speed and direction, but not to distance from the spray zone.

A stable pattern of EEG spectral coherence distinguishes children with autism from neuro-typical controls - a large case control study

PubMed Central

2012-01-01

Background The autism rate has recently increased to 1 in 100 children. Genetic studies demonstrate poorly understood complexity. Environmental factors apparently also play a role. Magnetic resonance imaging (MRI) studies demonstrate increased brain sizes and altered connectivity. Electroencephalogram (EEG) coherence studies confirm connectivity changes. However, genetic-, MRI- and/or EEG-based diagnostic tests are not yet available. The varied study results likely reflect methodological and population differences, small samples and, for EEG, lack of attention to group-specific artifact. Methods Of the 1,304 subjects who participated in this study, with ages ranging from 1 to 18 years old and assessed with comparable EEG studies, 463 children were diagnosed with autism spectrum disorder (ASD); 571 children were neuro-typical controls (C). After artifact management, principal components analysis (PCA) identified EEG spectral coherence factors with corresponding loading patterns. The 2- to 12-year-old subsample consisted of 430 ASD- and 554 C-group subjects (n = 984). Discriminant function analysis (DFA) determined the spectral coherence factors' discrimination success for the two groups. Loading patterns on the DFA-selected coherence factors described ASD-specific coherence differences when compared to controls. Results Total sample PCA of coherence data identified 40 factors which explained 50.8% of the total population variance. For the 2- to 12-year-olds, the 40 factors showed highly significant group differences (P < 0.0001). Ten randomly generated split half replications demonstrated high-average classification success (C, 88.5%; ASD, 86.0%). Still higher success was obtained in the more restricted age sub-samples using the jackknifing technique: 2- to 4-year-olds (C, 90.6%; ASD, 98.1%); 4- to 6-year-olds (C, 90.9%; ASD 99.1%); and 6- to 12-year-olds (C, 98.7%; ASD, 93.9%). Coherence loadings demonstrated reduced short-distance and reduced, as well as increased, long-distance coherences for the ASD-groups, when compared to the controls. Average spectral loading per factor was wide (10.1 Hz). Conclusions Classification success suggests a stable coherence loading pattern that differentiates ASD- from C-group subjects. This might constitute an EEG coherence-based phenotype of childhood autism. The predominantly reduced short-distance coherences may indicate poor local network function. The increased long-distance coherences may represent compensatory processes or reduced neural pruning. The wide average spectral range of factor loadings may suggest over-damped neural networks. PMID:22730909

Experimental Analysis of Heat Transfer Characteristics and Pressure Drop through Screen Regenerative Heat Exchangers

DTIC Science & Technology

1993-12-01

of fluid T1 initial temperature of matrix and fluid Tf1 average inlet temperature after the step change Tii average inlet temperature before the step...respectively, of the regenerator. The horizontal distances shown with Tf1 , Tj, and T,2 illustrate the time interval for which the average values were...temperature was not a true step function, the investigator made an approximation. The approximation was based on an average temperature. Tf1 was the

Improving the accuracy of k-nearest neighbor using local mean based and distance weight

NASA Astrophysics Data System (ADS)

Syaliman, K. U.; Nababan, E. B.; Sitompul, O. S.

2018-03-01

In k-nearest neighbor (kNN), the determination of classes for new data is normally performed by a simple majority vote system, which may ignore the similarities among data, as well as allowing the occurrence of a double majority class that can lead to misclassification. In this research, we propose an approach to resolve the majority vote issues by calculating the distance weight using a combination of local mean based k-nearest neighbor (LMKNN) and distance weight k-nearest neighbor (DWKNN). The accuracy of results is compared to the accuracy acquired from the original k-NN method using several datasets from the UCI Machine Learning repository, Kaggle and Keel, such as ionosphare, iris, voice genre, lower back pain, and thyroid. In addition, the proposed method is also tested using real data from a public senior high school in city of Tualang, Indonesia. Results shows that the combination of LMKNN and DWKNN was able to increase the classification accuracy of kNN, whereby the average accuracy on test data is 2.45% with the highest increase in accuracy of 3.71% occurring on the lower back pain symptoms dataset. For the real data, the increase in accuracy is obtained as high as 5.16%.

A three-year study of the impact of instructor attitude, enthusiasm, and teaching style on student learning in a medicinal chemistry course.

PubMed

Alsharif, Naser Z; Qi, Yongyue

2014-09-15

To determine the effect of instructor attitude, enthusiasm, and teaching style on learning for distance and campus pharmacy students. Over a 3-year period, distance and campus students enrolled in the spring semester of a medicinal chemistry course were asked to complete a survey instrument with questions related to instructor attitude, enthusiasm, and teaching style, as well as items to measure student intrinsic motivation and vitality. More positive responses were observed among distance students and older students. Gender did not impact student perspectives on 25 of the 26 survey questions. Student-related items were significantly correlated with instructor-related items. Also, student-related items and second-year cumulative grade point average were predictive of students' final course grades. Instructor enthusiasm demonstrated the highest correlation with student intrinsic motivation and vitality. While this study addresses the importance of content mastery and instructional methodologies, it focuses on issues related to instructor attitude, instructor enthusiasm, and teaching style, which all play a critical role in the learning process. Thus, instructors have a responsibility to evaluate, reevaluate, and analyze the above factors to address any related issues that impact the learning process, including their influence on professional students' intrinsic motivation and vitality, and ability to meet educational outcomes.

Temperature dependence of the evaporation lengthscale for water confined between two hydrophobic plates.

PubMed

Djikaev, Yuri S; Ruckenstein, Eli

2015-07-01

Liquid water in a hydrophobic confinement is the object of high interest in physicochemical sciences. Confined between two macroscopic hydrophobic surfaces, liquid water transforms into vapor if the distance between surfaces is smaller than a critical separation, referred to as the evaporation lengthscale. To investigate the temperature dependence of the evaporation lengthscale of water confined between two hydrophobic parallel plates, we use the combination of the density functional theory (DFT) with the probabilistic hydrogen bond (PHB) model for water-water hydrogen bonding. The PHB model provides an analytic expression for the average number of hydrogen bonds per water molecule as a function of its distance to a hydrophobic surface and its curvature. Knowing this expression, one can implement the effect of hydrogen bonding between water molecules on their interaction with the hydrophobe into DFT, which is then employed to determine the distribution of water molecules between two macroscopic hydrophobic plates at various interplate distances and various temperatures. For water confined between hydrophobic plates, our results suggest the evaporation lengthscale to be of the order of several nanometers and a linearly increasing function of temperature from T=293 K to T=333 K, qualitatively consistent with previous results. Copyright © 2015 Elsevier Inc. All rights reserved.

A Two-Phase Coverage-Enhancing Algorithm for Hybrid Wireless Sensor Networks.

PubMed

Zhang, Qingguo; Fok, Mable P

2017-01-09

Providing field coverage is a key task in many sensor network applications. In certain scenarios, the sensor field may have coverage holes due to random initial deployment of sensors; thus, the desired level of coverage cannot be achieved. A hybrid wireless sensor network is a cost-effective solution to this problem, which is achieved by repositioning a portion of the mobile sensors in the network to meet the network coverage requirement. This paper investigates how to redeploy mobile sensor nodes to improve network coverage in hybrid wireless sensor networks. We propose a two-phase coverage-enhancing algorithm for hybrid wireless sensor networks. In phase one, we use a differential evolution algorithm to compute the candidate's target positions in the mobile sensor nodes that could potentially improve coverage. In the second phase, we use an optimization scheme on the candidate's target positions calculated from phase one to reduce the accumulated potential moving distance of mobile sensors, such that the exact mobile sensor nodes that need to be moved as well as their final target positions can be determined. Experimental results show that the proposed algorithm provided significant improvement in terms of area coverage rate, average moving distance, area coverage-distance rate and the number of moved mobile sensors, when compare with other approaches.

A Two-Phase Coverage-Enhancing Algorithm for Hybrid Wireless Sensor Networks

PubMed Central

Zhang, Qingguo; Fok, Mable P.

2017-01-01

Providing field coverage is a key task in many sensor network applications. In certain scenarios, the sensor field may have coverage holes due to random initial deployment of sensors; thus, the desired level of coverage cannot be achieved. A hybrid wireless sensor network is a cost-effective solution to this problem, which is achieved by repositioning a portion of the mobile sensors in the network to meet the network coverage requirement. This paper investigates how to redeploy mobile sensor nodes to improve network coverage in hybrid wireless sensor networks. We propose a two-phase coverage-enhancing algorithm for hybrid wireless sensor networks. In phase one, we use a differential evolution algorithm to compute the candidate’s target positions in the mobile sensor nodes that could potentially improve coverage. In the second phase, we use an optimization scheme on the candidate’s target positions calculated from phase one to reduce the accumulated potential moving distance of mobile sensors, such that the exact mobile sensor nodes that need to be moved as well as their final target positions can be determined. Experimental results show that the proposed algorithm provided significant improvement in terms of area coverage rate, average moving distance, area coverage–distance rate and the number of moved mobile sensors, when compare with other approaches. PMID:28075365

Estimating rupture distances without a rupture

USGS Publications Warehouse

Thompson, Eric M.; Worden, Charles

2017-01-01

Most ground motion prediction equations (GMPEs) require distances that are defined relative to a rupture model, such as the distance to the surface projection of the rupture (RJB) or the closest distance to the rupture plane (RRUP). There are a number of situations in which GMPEs are used where it is either necessary or advantageous to derive rupture distances from point-source distance metrics, such as hypocentral (RHYP) or epicentral (REPI) distance. For ShakeMap, it is necessary to provide an estimate of the shaking levels for events without rupture models, and before rupture models are available for events that eventually do have rupture models. In probabilistic seismic hazard analysis, it is often convenient to use point-source distances for gridded seismicity sources, particularly if a preferred orientation is unknown. This avoids the computationally cumbersome task of computing rupture-based distances for virtual rupture planes across all strikes and dips for each source. We derive average rupture distances conditioned on REPI, magnitude, and (optionally) back azimuth, for a variety of assumed seismological constraints. Additionally, we derive adjustment factors for GMPE standard deviations that reflect the added uncertainty in the ground motion estimation when point-source distances are used to estimate rupture distances.

Preference for facial averageness: Evidence for a common mechanism in human and macaque infants

PubMed Central

Damon, Fabrice; Méary, David; Quinn, Paul C.; Lee, Kang; Simpson, Elizabeth A.; Paukner, Annika; Suomi, Stephen J.; Pascalis, Olivier

2017-01-01

Human adults and infants show a preference for average faces, which could stem from a general processing mechanism and may be shared among primates. However, little is known about preference for facial averageness in monkeys. We used a comparative developmental approach and eye-tracking methodology to assess visual attention in human and macaque infants to faces naturally varying in their distance from a prototypical face. In Experiment 1, we examined the preference for faces relatively close to or far from the prototype in 12-month-old human infants with human adult female faces. Infants preferred faces closer to the average than faces farther from it. In Experiment 2, we measured the looking time of 3-month-old rhesus macaques (Macaca mulatta) viewing macaque faces varying in their distance from the prototype. Like human infants, macaque infants looked longer to faces closer to the average. In Experiments 3 and 4, both species were presented with unfamiliar categories of faces (i.e., macaque infants tested with adult macaque faces; human infants and adults tested with infant macaque faces) and showed no prototype preferences, suggesting that the prototypicality effect is experience-dependent. Overall, the findings suggest a common processing mechanism across species, leading to averageness preferences in primates. PMID:28406237

Structural Heterogeneity and Quantitative FRET Efficiency Distributions of Polyprolines through a Hybrid Atomistic Simulation and Monte Carlo Approach

PubMed Central

Hoefling, Martin; Lima, Nicola; Haenni, Dominik; Seidel, Claus A. M.; Schuler, Benjamin; Grubmüller, Helmut

2011-01-01

Förster Resonance Energy Transfer (FRET) experiments probe molecular distances via distance dependent energy transfer from an excited donor dye to an acceptor dye. Single molecule experiments not only probe average distances, but also distance distributions or even fluctuations, and thus provide a powerful tool to study biomolecular structure and dynamics. However, the measured energy transfer efficiency depends not only on the distance between the dyes, but also on their mutual orientation, which is typically inaccessible to experiments. Thus, assumptions on the orientation distributions and averages are usually made, limiting the accuracy of the distance distributions extracted from FRET experiments. Here, we demonstrate that by combining single molecule FRET experiments with the mutual dye orientation statistics obtained from Molecular Dynamics (MD) simulations, improved estimates of distances and distributions are obtained. From the simulated time-dependent mutual orientations, FRET efficiencies are calculated and the full statistics of individual photon absorption, energy transfer, and photon emission events is obtained from subsequent Monte Carlo (MC) simulations of the FRET kinetics. All recorded emission events are collected to bursts from which efficiency distributions are calculated in close resemblance to the actual FRET experiment, taking shot noise fully into account. Using polyproline chains with attached Alexa 488 and Alexa 594 dyes as a test system, we demonstrate the feasibility of this approach by direct comparison to experimental data. We identified cis-isomers and different static local environments as sources of the experimentally observed heterogeneity. Reconstructions of distance distributions from experimental data at different levels of theory demonstrate how the respective underlying assumptions and approximations affect the obtained accuracy. Our results show that dye fluctuations obtained from MD simulations, combined with MC single photon kinetics, provide a versatile tool to improve the accuracy of distance distributions that can be extracted from measured single molecule FRET efficiencies. PMID:21629703

Children's Out-of-School Independently Mobile Trips, Active Travel, and Physical Activity: A Cross-Sectional Examination from the Kids in the City Study.

PubMed

Oliver, Melody; Parker, Karl; Witten, Karen; Mavoa, Suzanne; Badland, Hannah M; Donovan, Phil; Chaudhury, Moushumi; Kearn, Robin

2016-03-01

The study aim was to determine the association between children's objectively assessed moderate-to-vigorous physical activity (MVPA) and active trips (AT) and independently mobile trips (IM) during out-of-school hours. Children aged 9 to 13 years (n = 254) were recruited from 9 schools in Auckland, New Zealand between 2011 and 2012. Children completed travel diaries and wore accelerometers for 7 days. Parents provided demographic information. Geographic information systems-derived distance to school was calculated. Accelerometer data were extracted for out of school hours only. Percentage of time spent in MVPA (%MVPA), AT, and IM were calculated. Generalized estimating equations were used to determine the relationship between daily %MVPA and AT and between daily %MVPA and IM, accounting for age, sex, ethnicity, distance to school, day of the week, and numeric day of data collection. A significant positive relationship was observed between %MVPA and both AT and IM. For every unit increase in the daily percentage of trips made that were AT or IM, we found an average increase of 1.28% (95% CI 0.87%, 1.70%) and 1.15% (95% CI 0.71%, 1.59%) time in MVPA, respectively. Children's AT and IM are associated with increased MVPA during out-of-school hours.

Geospatial analysis of unmet pediatric surgical need in Uganda.

PubMed

Smith, Emily R; Vissoci, Joao Ricardo Nickenig; Rocha, Thiago Augusto Hernandes; Tran, Tu M; Fuller, Anthony T; Butler, Elissa K; de Andrade, Luciano; Makumbi, Fredrick; Luboga, Samuel; Muhumuza, Christine; Namanya, Didacus B; Chipman, Jeffrey G; Galukande, Moses; Haglund, Michael M

2017-10-01

In low- and middle-income countries (LMICs), an estimated 85% of children do not have access to surgical care. The objective of the current study was to determine the geographic distribution of surgical conditions among children throughout Uganda. Using the Surgeons OverSeas Assessment of Surgical Need (SOSAS) survey, we enumerated 2176 children in 2315 households throughout Uganda. At the district level, we determined the spatial autocorrelation of surgical need with geographic access to surgical centers variable. The highest average distance to a surgical center was found in the northern region at 14.97km (95% CI: 11.29km-16.89km). Younger children less than five years old had a higher prevalence of unmet surgical need in all four regions than their older counterparts. The spatial regression model showed that distance to surgical center and care availability were the main spatial predictors of unmet surgical need. We found differences in unmet surgical need by region and age group of the children, which could serve as priority areas for focused interventions to alleviate the burden. Future studies could be conducted in the northern regions to develop targeted interventions aimed at increasing pediatric surgical care in the areas of most need. Level III. Copyright © 2017 Elsevier Inc. All rights reserved.

An Improved Evidential-IOWA Sensor Data Fusion Approach in Fault Diagnosis

PubMed Central

Zhou, Deyun; Zhuang, Miaoyan; Fang, Xueyi; Xie, Chunhe

2017-01-01

As an important tool of information fusion, Dempster–Shafer evidence theory is widely applied in handling the uncertain information in fault diagnosis. However, an incorrect result may be obtained if the combined evidence is highly conflicting, which may leads to failure in locating the fault. To deal with the problem, an improved evidential-Induced Ordered Weighted Averaging (IOWA) sensor data fusion approach is proposed in the frame of Dempster–Shafer evidence theory. In the new method, the IOWA operator is used to determine the weight of different sensor data source, while determining the parameter of the IOWA, both the distance of evidence and the belief entropy are taken into consideration. First, based on the global distance of evidence and the global belief entropy, the α value of IOWA is obtained. Simultaneously, a weight vector is given based on the maximum entropy method model. Then, according to IOWA operator, the evidence are modified before applying the Dempster’s combination rule. The proposed method has a better performance in conflict management and fault diagnosis due to the fact that the information volume of each evidence is taken into consideration. A numerical example and a case study in fault diagnosis are presented to show the rationality and efficiency of the proposed method. PMID:28927017

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

NASA Technical Reports Server (NTRS)

Gopalswamy, N.; Thompson, W.; Davila, J.; Kaiser, M. L.; Yashiro, S.; Maekelae, P.; Michalek, G.; Bougeret, J.-L.; Hoawrd, R. A.

2010-01-01

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe coronal mass ejections (CMEs) a in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approximately 1.5Rs (solar radii), which coincides with the distance at which the Alfv?n speed profile has a minimum value. We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfv?n speed peaks (?3Rs ? 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approximately 1.5 Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2 Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

NASA Technical Reports Server (NTRS)

Gopalswamy, N.; Thompson, W.; Davila, J.; Kaiser, M.; Yashiro, S.; Maelekae, P.; Michalek, G.; Bougret, J.-L.; Howard, R. A.

2009-01-01

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe CMEs in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approx. 1.5Rs (solar radii), which coincides with the distance at which the Alfven speed profile has a minimum value.We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfven speed peaks (approx. 3Rs - 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approx 1.5Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

The Oval Female Facial Shape--A Study in Beauty.

PubMed

Goodman, Greg J

2015-12-01

Our understanding of who is beautiful seems to be innate but has been argued to conform to mathematical principles and proportions. One aspect of beauty is facial shape that is gender specific. In women, an oval facial shape is considered attractive. To study the facial shape of beautiful actors, pageant title winners, and performers across ethnicities and in different time periods and to construct an ideal oval shape based on the average of their facial shape dimensions. Twenty-one full-face photographs of purportedly beautiful female actors, performers, and pageant winners were analyzed and an oval constructed from their facial parameters. Only 3 of the 21 faces were totally symmetrical, with the most larger in the left upper and lower face. The average oval was subsequently constructed from an average bizygomatic distance (horizontal parameter) of 4.3 times their intercanthal distance (ICD) and a vertical dimension that averaged 6.3 times their ICD. This average oval could be fitted to many of the individual subjects showing a smooth flow from the forehead through temples, cheeks, jaw angle, jawline, and chin with all these facial aspects abutting the oval. Where they did not abut, treatment may have improved these subjects.

Impact assessment of a high-speed railway line on species distribution: application to the European tree frog (Hyla arborea) in Franche-Comté.

PubMed

Clauzel, Céline; Girardet, Xavier; Foltête, Jean-Christophe

2013-09-30

The aim of the present work is to assess the potential long-distance effect of a high-speed railway line on the distribution of the European tree frog (Hyla arborea) in eastern France by combining graph-based analysis and species distribution models. This combination is a way to integrate patch-level connectivity metrics on different scales into a predictive model. The approach used is put in place before the construction of the infrastructure and allows areas potentially affected by isolation to be mapped. Through a diachronic analysis, comparing species distribution before and after the construction of the infrastructure, we identify changes in the probability of species presence and we determine the maximum distance of impact. The results show that the potential impact decreases with distance from the high-speed railway line and the largest disturbances occur within the first 500 m. Between 500 m and 3500 m, the infrastructure generates a moderate decrease in the probability of presence with maximum values close to -40%. Beyond 3500 m the average disturbance is less than -10%. The spatial extent of the impact is greater than the dispersal distance of the tree frog, confirming the assumption of the long-distance effect of the infrastructure. This predictive modelling approach appears to be a useful tool for environmental impact assessment and strategic environmental assessment. The results of the species distribution assessment may provide guidance for field surveys and support for conservation decisions by identifying the areas most affected. Copyright © 2013 Elsevier Ltd. All rights reserved.

Portal placement in elbow arthroscopy by novice surgeons: cadaver study.

PubMed

Claessen, Femke M A P; Kachooei, Amir R; Kolovich, Gregory P; Buijze, Geert A; Oh, Luke S; van den Bekerom, Michel P J; Doornberg, Job N

2017-07-01

In this anatomical cadaver study, the distance between major nerves and ligaments at risk for injury and portal sites created by trainees was measured. Trainees, inexperienced in elbow arthroscopy, have received a didactic lecture and cadaver instruction prior to portal placement. The incidence of iatrogenic injury from novice portal placement was also determined. Anterolateral, direct lateral, and anteromedial arthroscopic portals were created in ten cadavers by ten inexperienced trainees in elbow arthroscopy. After creating each portal, the trajectory of the portal was marked with a guide pin. Subsequently, the cadavers were dissected and the distances between the guide pin in the anterolateral, direct lateral, and anteromedial portals and important ligaments and nerves were measured. The difference between the distance of the direct lateral portal and the posterior antebrachial cutaneous nerve (PABCN) (22 mm, p < 0.001), the lateral antebrachial cutaneous nerve (4.0 mm, p < 0.001), and the radial nerve (25 mm, p < 0.001) was different from the average reported distances in the literature. A difference was found between the distance of the anterolateral portal and the PABCN (32 mm, p < 0.001) compared to previous studies. Three major iatrogenic complications were observed, including: laceration of the posterior bundle of the medial ulnar collateral ligament, lateral ulnar collateral ligament midsubstance laceration, and median nerve partial laceration. Surgeons increasingly consider arthroscopic treatment as an option for elbow pathology. In the present study a surgical complication rate of 30 % was found with novice portal placement during elbow arthroscopy. Furthermore, as the results from this study have indicated, accurate, precise, and safe portal placement in elbow arthroscopy is not easily achieved by didactic lecture and cadaver instruction session alone. Level of evidence V.

DNA methylation intratumor heterogeneity in localized lung adenocarcinomas.

PubMed

Quek, Kelly; Li, Jun; Estecio, Marcos; Zhang, Jiexin; Fujimoto, Junya; Roarty, Emily; Little, Latasha; Chow, Chi-Wan; Song, Xingzhi; Behrens, Carmen; Chen, Taiping; William, William N; Swisher, Stephen; Heymach, John; Wistuba, Ignacio; Zhang, Jianhua; Futreal, Andrew; Zhang, Jianjun

2017-03-28

Cancers are composed of cells with distinct molecular and phenotypic features within a given tumor, a phenomenon termed intratumor heterogeneity (ITH). Previously, we have demonstrated genomic ITH in localized lung adenocarcinomas; however, the nature of methylation ITH in lung cancers has not been well investigated. In this study, we generated methylation profiles of 48 spatially separated tumor regions from 11 localized lung adenocarcinomas and their matched normal lung tissues using Illumina Infinium Human Methylation 450K BeadChip array. We observed methylation ITH within the same tumors, but to a much less extent compared to inter-individual heterogeneity. On average, 25% of all differentially methylated probes compared to matched normal lung tissues were shared by all regions from the same tumors. This is in contrast to somatic mutations, of which approximately 77% were shared events amongst all regions of individual tumors, suggesting that while the majority of somatic mutations were early clonal events, the tumor-specific DNA methylation might be associated with later branched evolution of these 11 tumors. Furthermore, our data showed that a higher extent of DNA methylation ITH was associated with larger tumor size (average Euclidean distance of 35.64 (> 3cm, median size) versus 27.24 (<= 3cm), p = 0.014), advanced age (average Euclidean distance of 34.95 (above 65) verse 28.06 (below 65), p = 0.046) and increased risk of postsurgical recurrence (average Euclidean distance of 35.65 (relapsed patients) versus 29.03 (patients without relapsed), p = 0.039).

Accuracy of relative positioning by interferometry with GPS Double-blind test results

NASA Technical Reports Server (NTRS)

Counselman, C. C., III; Gourevitch, S. A.; Herring, T. A.; King, B. W.; Shapiro, I. I.; Cappallo, R. J.; Rogers, A. E. E.; Whitney, A. R.; Greenspan, R. L.; Snyder, R. E.

1983-01-01

MITES (Miniature Interferometer Terminals for Earth Surveying) observations conducted on December 17 and 29, 1980, are analyzed. It is noted that the time span of the observations used on each day was 78 minutes, during which five satellites were always above 20 deg elevation. The observations are analyzed to determine the intersite position vectors by means of the algorithm described by Couselman and Gourevitch (1981). The average of the MITES results from the two days is presented. The rms differences between the two determinations of the components of the three vectors, which were about 65, 92, and 124 m long, were 8 mm for the north, 3 mm for the east, and 6 mm for the vertical. It is concluded that, at least for short distances, relative positioning by interferometry with GPS can be done reliably with subcentimeter accuracy.

Numerical analysis of interface debonding detection in bonded repair with Rayleigh waves

NASA Astrophysics Data System (ADS)

Xu, Ying; Li, BingCheng; Lu, Miaomiao

2017-01-01

This paper studied how to use the variation of the dispersion curves of Rayleigh wave group velocity to detect interfacial debonding damage between FRP plate and steel beam. Since FRP strengthened steel beam is two layers medium, Rayleigh wave velocity dispersion phenomenon will happen. The interface debonding damage of FRP strengthened steel beam have an obvious effect on the Rayleigh wave velocity dispersion curve. The paper first put forward average Euclidean distance and Angle separation degree to describe the relationship between the different dispersion curves. Numerical results indicate that there is a approximate linear mapping relationship between the average Euclidean distance of dispersion curves and the length of interfacial debonding damage.

Per tree estimates with n-tree distance sampling: an application to increment core data

Treesearch

Thomas B. Lynch; Robert F. Wittwer

2002-01-01

Per tree estimates using the n trees nearest a point can be obtained by using a ratio of per unit area estimates from n-tree distance sampling. This ratio was used to estimate average age by d.b.h. classes for cottonwood trees (Populus deltoides Bartr. ex Marsh.) on the Cimarron National Grassland. Increment...

Defeating Inequalities in School Access: A Case of Children with Disabilities in Pakistan

ERIC Educational Resources Information Center

Hameed, Abdul; Manzoor, Afaf

2016-01-01

A recent study reveals that average distance from home to special school for children with disabilities in Punjab is about 11 km. A huge and free transport system is established to overcome the distance barrier. Moreover, the incentives such as free uniform, books, assistive devices and hostel facility along with subsistence allowance of Rs.800…

Biochemical Systematics and Population Genetic Structure of Anopheles Pseudopunctipennis, Vector of Malaria in Central and South America

DTIC Science & Technology

1995-01-01

statistics. Nei’s23 unbiased and Rogers’24 genetic distances were clus- tered by the unweighted pair group method using the arith- metic average ( UPGMA ...Franc0 and others’ and were clustered by UPGMA to produce the phen- ograms shown in Figures 3 and 4. Phenograms produced using other distance measures

Scaling Up: Faculty Workload, Class Size, and Student Satisfaction in a Distance Learning Course on Geographic Information Science.

ERIC Educational Resources Information Center

Dibiase, David; Rademacher, Henry J.

2005-01-01

This article explores issues of scalability and sustainability in distance learning. The authors kept detailed records of time they spent teaching a course in geographic information science via the World Wide Web over a six-month period, during which class sizes averaged 49 students. The authors also surveyed students' satisfaction with the…

Egomotion Estimation with Optic Flow and Air Velocity Sensors

DTIC Science & Technology

2012-01-22

RUMMELT ADAM J. RUTKOWSKI Acting Technical Advisor, RWW Program Manager This report is...method of distance and groundspeed estimation using an omnidirectional camera, but knowledge of the average scene distance is required. Flight height...varying wind and even over sloped terrain. Our method also does not require any prior knowledge of the environment or the flyer motion states. This

Three-dimensional structure of the human immunodeficiency virus type 1 matrix protein.

PubMed

Massiah, M A; Starich, M R; Paschall, C; Summers, M F; Christensen, A M; Sundquist, W I

1994-11-25

The HIV-1 matrix protein forms an icosahedral shell associated with the inner membrane of the mature virus. Genetic analyses have indicated that the protein performs important functions throughout the viral life-cycle, including anchoring the transmembrane envelope protein on the surface of the virus, assisting in viral penetration, transporting the proviral integration complex across the nuclear envelope, and localizing the assembling virion to the cell membrane. We now report the three-dimensional structure of recombinant HIV-1 matrix protein, determined at high resolution by nuclear magnetic resonance (NMR) methods. The HIV-1 matrix protein is the first retroviral matrix protein to be characterized structurally and only the fourth HIV-1 protein of known structure. NMR signal assignments required recently developed triple-resonance (1H, 13C, 15N) NMR methodologies because signals for 91% of 132 assigned H alpha protons and 74% of the 129 assignable backbone amide protons resonate within chemical shift ranges of 0.8 p.p.m. and 1 p.p.m., respectively. A total of 636 nuclear Overhauser effect-derived distance restraints were employed for distance geometry-based structure calculations, affording an average of 13.0 NMR-derived distance restraints per residue for the experimentally constrained amino acids. An ensemble of 25 refined distance geometry structures with penalties (sum of the squares of the distance violations) of 0.32 A2 or less and individual distance violations under 0.06 A was generated; best-fit superposition of ordered backbone heavy atoms relative to mean atom positions afforded root-mean-square deviations of 0.50 (+/- 0.08) A. The folded HIV-1 matrix protein structure is composed of five alpha-helices, a short 3(10) helical stretch, and a three-strand mixed beta-sheet. Helices I to III and the 3(10) helix pack about a central helix (IV) to form a compact globular domain that is capped by the beta-sheet. The C-terminal helix (helix V) projects away from the beta-sheet to expose carboxyl-terminal residues essential for early steps in the HIV-1 infectious cycle. Basic residues implicated in membrane binding and nuclear localization functions cluster about an extruded cationic loop that connects beta-strands 1 and 2. The structure suggests that both membrane binding and nuclear localization may be mediated by complex tertiary structures rather than simple linear determinants.

Tomodensitometric survey of the distance between thoracic and abdominal vital organs and the wall according to BMI, abdominal diameter and gender: proposition of an indicative chart for the forensic activities.

PubMed

Venara, A; Gaudin, A; Lebigot, J; Airagnes, G; Hamel, J F; Jousset, N; Ridereau-Zins, C; Mauillon, D; Rouge-Maillart, C

2013-06-10

Forensic doctors are frequently asked by magistrates when dealing principally with knife wounds, about the depth of the blade which may have penetrated the victim's body. Without the use of imaging, it is often difficult to respond to this question, even in an approximate way. Knowledge of the various distances between organs and the skin wall would allow an assessment to be made of the minimum blade length required to obtain the injuries observed. The objective of this study is thus to determine average distances between the vital organs of the thorax and abdomen, and the skin wall, taking into account the person's body mass index (BMI). This is a prospective single-center study, carried out over a 2-month period at University Hospital in Angers. A sample of 200 people was studied. The inclusion criteria were as follows: all patients coming to the radiology department and the emergency department for an abdominal, thoracic or thoraco-abdominal scan with injection. The exclusion criteria included patients presenting a large lymphoma, a large abdominal or retroperitoneal tumor, a tumor in one of the organs targeted by our study and patients presenting ascites. The organs focused on were: the pericardium, pleura, aorta, liver, spleen, kidneys, abdominal aorta and femoral arteries. The shortest distance between the organ and the skin wall was noted. Median distances were calculated according to gender, abdominal diameter and BMI. We associated these values to propose an indicative chart which may be used by doctors in connection with their forensic activities. The problem of the depth of a wound is frequently exposed to the expert. Without a reliable tool, it is difficult to value and a personal interpretation is often done. Even if, in current days, tomodensitometry is frequently done in vivo or after death, measurement can be difficult because of the local conditions. We classified values according to the different factors of fat repartition (BMI, abdominal diameter, gender). These tables, collectively used, permit evaluation of the distance between wall and thoracic or abdominal vital organs. We suggest an indicative chart designed for forensic doctors in their professional life to help determine the minimum penetration length for a knife, which may wound a vital organ. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Correction of Motion Artifacts From Shuttle Mode Computed Tomography Acquisitions for Body Perfusion Imaging Applications.

PubMed

Ghosh, Payel; Chandler, Adam G; Altinmakas, Emre; Rong, John; Ng, Chaan S

2016-01-01

The aim of this study was to investigate the feasibility of shuttle-mode computed tomography (CT) technology for body perfusion applications by quantitatively assessing and correcting motion artifacts. Noncontrast shuttle-mode CT scans (10 phases, 2 nonoverlapping bed locations) were acquired from 4 patients on a GE 750HD CT scanner. Shuttling effects were quantified using Euclidean distances (between-phase and between-bed locations) of corresponding fiducial points on the shuttle and reference phase scans (prior to shuttle mode). Motion correction with nonrigid registration was evaluated using sum-of-squares differences and distances between centers of segmented volumes of interest on shuttle and references images. Fiducial point analysis showed an average shuttling motion of 0.85 ± 1.05 mm (between-bed) and 1.18 ± 1.46 mm (between-phase), respectively. The volume-of-interest analysis of the nonrigid registration results showed improved sum-of-squares differences from 2950 to 597, between-bed distance from 1.64 to 1.20 mm, and between-phase distance from 2.64 to 1.33 mm, respectively, averaged over all cases. Shuttling effects introduced during shuttle-mode CT acquisitions can be computationally corrected for body perfusion applications.

Observations of the interplanetary magnetic field between 0.46 and 1 A.U. by the Mariner 10 spacecraft. Ph.D. Thesis - Catholic Univ. of Am.

NASA Technical Reports Server (NTRS)

Behannon, K. W.

1976-01-01

Almost continuous measurement of the interplanetary magnetic field (IMF) at a sampling rate of 25 vectors/sec was performed by the magnetic field experiment onboard the Mariner 10 spacecraft during the period November 3, 1973 to April 14, 1974, comprising approximately 5-2/3 solar rotations and extending in radial distance from the sun from 1 to 0.46 AU. A clearly discernible two-sector pattern of field polarity was observed during the last 3-1/2 months of the period, with the dominant polarity toward the sun below the solar equatorial plane. Two compound high-speed solar wind streams were also present during this period, one in each magnetic field sector. Relative fluctuations of the field in magnitude and direction were found to have large time variations, but on average the relative magnitude fluctuations were approximately constant over the range of heliocentric distance covered while the relative directional fluctuations showed a slight decrease on average with increasing distance. The occurrence rate of directional discontinuities was also found to decrease with increasing radial distance from the sun.

Compensatory mutations cause excess of antagonistic epistasis in RNA secondary structure folding.

PubMed

Wilke, Claus O; Lenski, Richard E; Adami, Christoph

2003-02-05

The rate at which fitness declines as an organism's genome accumulates random mutations is an important variable in several evolutionary theories. At an intuitive level, it might seem natural that random mutations should tend to interact synergistically, such that the rate of mean fitness decline accelerates as the number of random mutations is increased. However, in a number of recent studies, a prevalence of antagonistic epistasis (the tendency of multiple mutations to have a mitigating rather than reinforcing effect) has been observed. We studied in silico the net amount and form of epistatic interactions in RNA secondary structure folding by measuring the fraction of neutral mutants as a function of mutational distance d. We found a clear prevalence of antagonistic epistasis in RNA secondary structure folding. By relating the fraction of neutral mutants at distance d to the average neutrality at distance d, we showed that this prevalence derives from the existence of many compensatory mutations at larger mutational distances. Our findings imply that the average direction of epistasis in simple fitness landscapes is directly related to the density with which fitness peaks are distributed in these landscapes.

Compensatory mutations cause excess of antagonistic epistasis in RNA secondary structure folding

PubMed Central

Wilke, Claus O; Lenski, Richard E; Adami, Christoph

2003-01-01

Background The rate at which fitness declines as an organism's genome accumulates random mutations is an important variable in several evolutionary theories. At an intuitive level, it might seem natural that random mutations should tend to interact synergistically, such that the rate of mean fitness decline accelerates as the number of random mutations is increased. However, in a number of recent studies, a prevalence of antagonistic epistasis (the tendency of multiple mutations to have a mitigating rather than reinforcing effect) has been observed. Results We studied in silico the net amount and form of epistatic interactions in RNA secondary structure folding by measuring the fraction of neutral mutants as a function of mutational distance d. We found a clear prevalence of antagonistic epistasis in RNA secondary structure folding. By relating the fraction of neutral mutants at distance d to the average neutrality at distance d, we showed that this prevalence derives from the existence of many compensatory mutations at larger mutational distances. Conclusions Our findings imply that the average direction of epistasis in simple fitness landscapes is directly related to the density with which fitness peaks are distributed in these landscapes. PMID:12590655

Determination of lung segments in computed tomography images using the Euclidean distance to the pulmonary artery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoecker, Christina; Moltz, Jan H.; Lassen, Bianca

Purpose: Computed tomography (CT) imaging is the modality of choice for lung cancer diagnostics. With the increasing number of lung interventions on sublobar level in recent years, determining and visualizing pulmonary segments in CT images and, in oncological cases, reliable segment-related information about the location of tumors has become increasingly desirable. Computer-assisted identification of lung segments in CT images is subject of this work.Methods: The authors present a new interactive approach for the segmentation of lung segments that uses the Euclidean distance of each point in the lung to the segmental branches of the pulmonary artery. The aim is tomore » analyze the potential of the method. Detailed manual pulmonary artery segmentations are used to achieve the best possible segment approximation results. A detailed description of the method and its evaluation on 11 CT scans from clinical routine are given.Results: An accuracy of 2–3 mm is measured for the segment boundaries computed by the pulmonary artery-based method. On average, maximum deviations of 8 mm are observed. 135 intersegmental pulmonary veins detected in the 11 test CT scans serve as reference data. Furthermore, a comparison of the presented pulmonary artery-based approach to a similar approach that uses the Euclidean distance to the segmental branches of the bronchial tree is presented. It shows a significantly higher accuracy for the pulmonary artery-based approach in lung regions at least 30 mm distal to the lung hilum.Conclusions: A pulmonary artery-based determination of lung segments in CT images is promising. In the tests, the pulmonary artery-based determination has been shown to be superior to the bronchial tree-based determination. The suitability of the segment approximation method for application in the planning of segment resections in clinical practice has already been verified in experimental cases. However, automation of the method accompanied by an evaluation on a larger number of test cases is required before application in the daily clinical routine.« less

30 CFR 219.414 - How will MMS determine each Gulf producing State's share of the qualified OCS revenues?

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicable leased tract and, using the great circle distance method, will determine the closest distance from... total, over all applicable leased tracts, the mathematical inverses of the distances between the points...

Population Structure of the Primary Malaria Vector in South America, Anopheles darlingi, Using Isozyme, Random Amplified Polymorphic DNA, Internal Transcribed Spacer 2, and Morphologic Markers

DTIC Science & Technology

1999-01-01

distances and identities and Roger?’ genetic distances were clustered by the unweighted pair group method using arithmetic average ( UPGMA ) to produce...Seattle, WA) using the NEIGHBOR program with the UPGMA option and a phenogram was produced with DRAWGRAM, also in PHYLIP 3.X RAPDBOOT5’ was used to...generate 100 pseudoreplicate distance matrices, which were collapsed to form 100 trees with UPGMA . The bootstrap consensus tree was derived from the 100

Method for Correcting Control Surface Angle Measurements in Single Viewpoint Photogrammetry

NASA Technical Reports Server (NTRS)

Burner, Alpheus W. (Inventor); Barrows, Danny A. (Inventor)

2006-01-01

A method of determining a corrected control surface angle for use in single viewpoint photogrammetry to correct control surface angle measurements affected by wing bending. First and second visual targets are spaced apart &om one another on a control surface of an aircraft wing. The targets are positioned at a semispan distance along the aircraft wing. A reference target separation distance is determined using single viewpoint photogrammetry for a "wind off condition. An apparent target separation distance is then computed for "wind on." The difference between the reference and apparent target separation distances is minimized by recomputing the single viewpoint photogrammetric solution for incrementally changed values of target semispan distances. A final single viewpoint photogrammetric solution is then generated that uses the corrected semispan distance that produced the minimized difference between the reference and apparent target separation distances. The final single viewpoint photogrammetric solution set is used to determine the corrected control surface angle.

Hip abduction-adduction strength and one-leg hop tests: test-retest reliability and relationship to function in elite ice hockey players.

PubMed

Kea, J; Kramer, J; Forwell, L; Birmingham, T

2001-08-01

Single group, test-retest. To determine: (1) hip abduction and adduction torques during concentric and eccentric muscle actions, (2) medial and lateral one-leg hop distances, (3) the test-retest reliability of these measurements, and (4) the relationship between isokinetic measures of hip muscle strength and hop distances in elite ice hockey players. The skating motion used in ice hockey requires strong contractions of the hip and knee musculature. However, baseline scores for hip strength and hop distances, their test-retest reliability, and measures of the extent to which these tests are related for this population are not available. The dominant leg of 27 men (mean age 20 +/- 3 yrs) was tested on 2 occasions. Hip abduction and adduction movements were completed at 60 degrees.s(-1) angular velocity, with the subject lying on the non-test side and the test leg moving vertically in the subject's coronal plane. One-leg hops requiring jumping from and landing on the same leg without losing balance were completed in the medial and lateral directions. Hip adduction torques were significantly greater than abduction torques during both concentric and eccentric muscle actions, while no significant difference was observed between medial and lateral hop distances. Although hop test scores produced excellent ICCs (> 0.75) when determined using scores on 1 occasion, torques needed to be averaged over 2 test occasions to reach this level. Correlations between the strength and hop tests ranged from slight to low (r = -0.26 to 0.27) and were characterized by wide 95% confidence intervals (-0.54 to 0.61). Isokinetic tests of hip abduction and adduction did not provide a strong indication of performance during sideways hop tests. Although isokinetic tests can provide a measure of muscular strength under specific test conditions, they should not be relied upon as a primary indicator of functional abilities or readiness to return to activity.

The crystal structure of tin sulphate, SnSO[subscript 4], and comparison with isostructural SrSO[subscript 4], PbSO[subscript 4], and BaSO[subscript 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antao, Sytle M.

2012-10-23

The crystal structure of tin (II) sulphate, SnSO{sub 4}, was obtained by Rietveld refinement using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data. The structure was refined in space group Pbnm. The unit-cell parameters for SnSO{sub 4} are a = 7.12322(1), b = 8.81041(1), c = 5.32809(1) {angstrom}, and V = 334.383(1) {angstrom}{sup 3}. The average [12] distance is 2.9391(4) {angstrom}. However, the Sn{sup 2+} cation has a pyramidal [3]-coordination to O atoms and the average [3] = 2.271(1) {angstrom}. If Sn is considered as [12]-coordinated, SnSO{sub 4} has a structure similar to barite, BaSO{sub 4}, and its structuralmore » parameters are intermediate between those of BaSO{sub 4} and PbSO{sub 4}. The tetrahedral SO{sub 4} group has an average [4] = 1.472(1) {angstrom} in SnSO{sub 4}. Comparing SnSO{sub 4} with the isostructural SrSO{sub 4}, PbSO{sub 4}, and BaSO{sub 4}, several well-defined trends are observed. The radii, rM, of the M{sup 2+}(=Sr, Pb, Sn, and Ba) cations and average distances vary linearly with V because of the effective size of the M{sup 2+} cation. Based on the trend for the isostructural sulphates, the average [12] distance is slightly longer than expected because of the lone pair of electrons on the Sn{sup 2+} cation.« less

Study of the effect of electromagnetic fields on indoor and outdoor radon concentrations

NASA Astrophysics Data System (ADS)

Haider, Lina M.; Shareef, N. R.; Darwoysh, H. H.; Mansour, H. L.

2018-05-01

In the present work, the effect of electromagnetic fields produced by high voltage power lines(132kV) and indoor equipments on the indoor and outdoor average radon concentrations in Al-Kazaliya and Hay Al-Adil regions in Baghdad city were studied using CR-39 track detectors and a gauss-meter.Results of measurements of the present study, have shown that the highest value for the indoor average radon concentration (76.56± 8.44 Bq / m3) was recorded for sample A1(Hay Al-Adel) at a distance of (20 m) from the high voltage power lines, while the lowest value for the indoor average radon concentration (30.46 ± 8.44 Bq / m3) was recorded for sample A3 (Hay Al-Adil) at a distance of (50 m) from the high voltage power lines. The indoor gaussmeter measurements were found to be ranged from (30.2 mG) to (38.5 mG). The higest value for outdoor average radon concentration and the highest gaussmeter measurements were found for sample (1), with values (92.63 ±11.2 Bq / m3) and (87.24 ± 2.85 mG), directly under the high voltage power lines respectively, while the lowest outdoor average radon concentration and the lowest gaussmeter measurements were found in sample (4),with values (34.19 ± 6.33 Bq / m3) and (1.16 ± 0.14 Bq / m3),), at a distance of (120 m) from the high voltage power lines respectively. The results of the present work have shown that there might be an influence of the electromagnetic field on radon concentrations in areas which were close to high voltage power lines and houses which have used many electric equipment for a long period of time.

[Further study on possibility of diffusion of Oncomelania hupensis with water in river channels of the east route of South-to-North Water Diversion Project].

PubMed

Huang, Yi-Xin; Hang, De-Rong; Tang, Hong-Ping; Sun, Dao-Kuan; Zhou, Can-Hua; Gao, Jin-Bin; Zheng, Bo; Hu, Gui-Quan; Li, Qian; Huang, Yong-Jun; She, Guang-Song; Ren, Zhi-Yuan

2014-12-01

To study the drifting law of floats and potential risks of Oncomelania hupensis diffusion in the water diversion rivers of the east route of South-to-North Water Diversion Project. The O. hupensis snails in the river channels were monitored by the salvage method and snail luring method with rice straw curtains, and the diffusion possibility of snails along with water was assessed through the drift test of floats with GPS. In the flood seasons from 2006 to 2013, totally 8 338.0 kg of floats were salvaged, and 2 100 rice straw curtains were put into water in the Li Canal and Jinbao shipping channel, but no Oncomelania snails were found. The drift test of floats with GPS before water diversion showed that the flow velocity on water surface (northbound) was 0.45 m/s, the average drift velocity of the floats was 0.56 - 0.60 m/s, and the average drift distances each time were 999.70 - 1 995.50 m in the Gaoshui River section, while there were no obvious drift in Jinbao shipping channel section. During the water diversion period, the flow velocity on water surface (northbound) was 0.45 m/s, the average drift velocity of the floats was 0.35 - 0.41m/s, and the average drift distances each time were 1 248.06 -1 289.44 m in the Gaoshui River, while in Jinbao shipping channel section, the flow velocity on water surface was 0.28 m/s, the average drift velocity of the floats was 0.25 - 0.27 m/s, and the average drift distances each time were 477.76 - 496.38 m. The drift test showed that the floats gradually closed to the river bank as affected by water flow, wind direction and ship waves, when blocked by the reeds, water plants or other obstacles, and they would stopped and could not continue to drift without outside help. There are no Oncomelania snails found in the river channels of the east route of South-to-North Water Diversion Project. The drifting distance of the floating debris along with the water is restricted by the flow rate and shore environment.

Outdoor air pollution in close proximity to a continuous point source

NASA Astrophysics Data System (ADS)

Klepeis, Neil E.; Gabel, Etienne B.; Ott, Wayne R.; Switzer, Paul

Data are lacking on human exposure to air pollutants occurring in ground-level outdoor environments within a few meters of point sources. To better understand outdoor exposure to tobacco smoke from cigarettes or cigars, and exposure to other types of outdoor point sources, we performed more than 100 controlled outdoor monitoring experiments on a backyard residential patio in which we released pure carbon monoxide (CO) as a tracer gas for continuous time periods lasting 0.5-2 h. The CO was emitted from a single outlet at a fixed per-experiment rate of 120-400 cc min -1 (˜140-450 mg min -1). We measured CO concentrations every 15 s at up to 36 points around the source along orthogonal axes. The CO sensors were positioned at standing or sitting breathing heights of 2-5 ft (up to 1.5 ft above and below the source) and at horizontal distances of 0.25-2 m. We simultaneously measured real-time air speed, wind direction, relative humidity, and temperature at single points on the patio. The ground-level air speeds on the patio were similar to those we measured during a survey of 26 outdoor patio locations in 5 nearby towns. The CO data exhibited a well-defined proximity effect similar to the indoor proximity effect reported in the literature. Average concentrations were approximately inversely proportional to distance. Average CO levels were approximately proportional to source strength, supporting generalization of our results to different source strengths. For example, we predict a cigarette smoker would cause average fine particle levels of approximately 70-110 μg m -3 at horizontal distances of 0.25-0.5 m. We also found that average CO concentrations rose significantly as average air speed decreased. We fit a multiplicative regression model to the empirical data that predicts outdoor concentrations as a function of source emission rate, source-receptor distance, air speed and wind direction. The model described the data reasonably well, accounting for ˜50% of the log-CO variability in 5-min CO concentrations.

A Robust Step Detection Algorithm and Walking Distance Estimation Based on Daily Wrist Activity Recognition Using a Smart Band.

PubMed

Trong Bui, Duong; Nguyen, Nhan Duc; Jeong, Gu-Min

2018-06-25

Human activity recognition and pedestrian dead reckoning are an interesting field because of their importance utilities in daily life healthcare. Currently, these fields are facing many challenges, one of which is the lack of a robust algorithm with high performance. This paper proposes a new method to implement a robust step detection and adaptive distance estimation algorithm based on the classification of five daily wrist activities during walking at various speeds using a smart band. The key idea is that the non-parametric adaptive distance estimator is performed after two activity classifiers and a robust step detector. In this study, two classifiers perform two phases of recognizing five wrist activities during walking. Then, a robust step detection algorithm, which is integrated with an adaptive threshold, peak and valley correction algorithm, is applied to the classified activities to detect the walking steps. In addition, the misclassification activities are fed back to the previous layer. Finally, three adaptive distance estimators, which are based on a non-parametric model of the average walking speed, calculate the length of each strike. The experimental results show that the average classification accuracy is about 99%, and the accuracy of the step detection is 98.7%. The error of the estimated distance is 2.2⁻4.2% depending on the type of wrist activities.

An improved initialization center k-means clustering algorithm based on distance and density

NASA Astrophysics Data System (ADS)

Duan, Yanling; Liu, Qun; Xia, Shuyin

2018-04-01

Aiming at the problem of the random initial clustering center of k means algorithm that the clustering results are influenced by outlier data sample and are unstable in multiple clustering, a method of central point initialization method based on larger distance and higher density is proposed. The reciprocal of the weighted average of distance is used to represent the sample density, and the data sample with the larger distance and the higher density are selected as the initial clustering centers to optimize the clustering results. Then, a clustering evaluation method based on distance and density is designed to verify the feasibility of the algorithm and the practicality, the experimental results on UCI data sets show that the algorithm has a certain stability and practicality.

Improved UUV Positioning Using Acoustic Communications and a Potential for Real-Time Networking and Collaboration

DTIC Science & Technology

2017-06-01

12 III. ACOUSTIC WAVE TRAVEL TIME ESTIMATION...Mission ...............................125 Table 8. Average Horizontal Distance from the UUV to the Reference Points when a Travel Time Measurement is...Taken ............................................126 Table 9. Average UUV Depth when a Travel Time Measurement is Taken .........126 Table 10. Ratio

Measuring multiple spike train synchrony.

PubMed

Kreuz, Thomas; Chicharro, Daniel; Andrzejak, Ralph G; Haas, Julie S; Abarbanel, Henry D I

2009-10-15

Measures of multiple spike train synchrony are essential in order to study issues such as spike timing reliability, network synchronization, and neuronal coding. These measures can broadly be divided in multivariate measures and averages over bivariate measures. One of the most recent bivariate approaches, the ISI-distance, employs the ratio of instantaneous interspike intervals (ISIs). In this study we propose two extensions of the ISI-distance, the straightforward averaged bivariate ISI-distance and the multivariate ISI-diversity based on the coefficient of variation. Like the original measure these extensions combine many properties desirable in applications to real data. In particular, they are parameter-free, time scale independent, and easy to visualize in a time-resolved manner, as we illustrate with in vitro recordings from a cortical neuron. Using a simulated network of Hindemarsh-Rose neurons as a controlled configuration we compare the performance of our methods in distinguishing different levels of multi-neuron spike train synchrony to the performance of six other previously published measures. We show and explain why the averaged bivariate measures perform better than the multivariate ones and why the multivariate ISI-diversity is the best performer among the multivariate methods. Finally, in a comparison against standard methods that rely on moving window estimates, we use single-unit monkey data to demonstrate the advantages of the instantaneous nature of our methods.

Ranking prediction model using the competition record of Ladies Professional Golf Association players.

PubMed

Chae, Jin Seok; Park, Jin; So, Wi-Young

2017-07-28

The purpose of this study was to suggest a ranking prediction model using the competition record of the Ladies Professional Golf Association (LPGA) players. The top 100 players on the tour money list from the 2013-2016 US Open were analyzed in this model. Stepwise regression analysis was conducted to examine the effect of performance and independent variables (i.e., driving accuracy, green in regulation, putts per round, driving distance, percentage of sand saves, par-3 average, par-4 average, par-5 average, birdies average, and eagle average) on dependent variables (i.e., scoring average, official money, top-10 finishes, winning percentage, and 60-strokes average). The following prediction model was suggested:Y (Scoring average) = 55.871 - 0.947 (Birdies average) + 4.576 (Par-4 average) - 0.028 (Green in regulation) - 0.012 (Percentage of sand saves) + 2.088 (Par-3 average) - 0.026 (Driving accuracy) - 0.017 (Driving distance) + 0.085 (Putts per round)Y (Official money) = 6628736.723 + 528557.907 (Birdies average) - 1831800.821 (Par-4 average) + 11681.739 (Green in regulation) + 6476.344 (Percentage of sand saves) - 688115.074 (Par-3 average) + 7375.971 (Driving accuracy)Y (Top-10 finish%) = 204.462 + 12.562 (Birdies average) - 47.745 (Par-4 average) + 1.633 (Green in regulation) - 5.151 (Putts per round) + 0.132 (Percentage of sand saves)Y (Winning percentage) = 49.949 + 3.191 (Birdies average) - 15.023 (Par-4 average) + 0.043 (Percentage of sand saves)Y (60-strokes average) = 217.649 + 13.978 (Birdies average) - 44.855 (Par-4 average) - 22.433 (Par-3 average) + 0.16 (Green in regulation)Scoring of the above five prediction models and the prediction of golf ranking in the 2016 Women's Golf Olympic competition in Rio revealed a significant correlation between the predicted and real ranking (r = 0.689, p < 0.001) and between the predicted and the real average score (r = 0.653, p < 0.001). Our ranking prediction model using LPGA data may help coaches and players to identify which players are likely to participate in Olympic and World competitions, based on their performance.

Genetic profile based upon 15 microsatellites of four caste groups of the eastern Indian state, Bihar.

PubMed

Ashma, R; Kashyap, V K

2003-01-01

The formation of caste groups among the Hindu community and the practice of endogamy exert a great impact on the genetic structure and diversity of the Indian population. Allele frequency data of 15 microsatellite loci clearly portray the genetic diversity and relatedness among four socio-culturally advanced caste groups: Brahmin, Bhumihar, Rajput and Kayasth of Caucasoid ethnicity of Bihar. The study seeks to understand the impact of the man-made caste system on the genetic profile of the four major caste groups of Bihar. Computation of average heterozygosity, most frequent allele, allele diversity and coefficient of gene differentiation (Gst), along with genetic distance (DA)and principal coordinate analysis were performed to assess intra-population and inter-population diversity. The average Gst value for all the loci was 0.012 +/- 0.0033, and the level of average heterozygosity was approximately 75.5%, indicating genetic similarity and intra-population diversity. Genetic distance (DA) values and the phylogenetic tree along with other higher caste groups of India indicate the relative distance between them. The present study clearly depicts the genetic profile of these caste groups, their inherent closeness in the past, and the impact of the imposed caste system that later restricted the gene flow. The study highlights the status of Bhumihar and Kayasth in the Hindu caste system. The former was found clustering with the Brahmin group (as expected, since Bhumihar is known to be a subclass of Brahmin), whereas the distance between the Brahmin and Kayasth caste groups was found to be large. North-eastern Indian Mongoloids form a separate cluster.

Evidence that dorsally mounted satellite transmitters affect migration chronology of Northern Pintails

USGS Publications Warehouse

Hupp, Jerry W.; Kharitonov, Sergei; Yamaguchi, Noriyuki M.; Ozaki, K.; Flint, Paul L.; Pearce, John M.; Tokita, Ken-ichi; Shimada, Tetsuo; Higuchi, Hiroyoshi

2015-01-01

We compared migration movements and chronology between Northern Pintails (Anas acuta) marked with dorsally mounted satellite transmitters and pintails marked only with tarsus rings. During weekly intervals of spring and autumn migration between their wintering area in Japan and nesting areas in Russia, the mean distance that ringed pintails had migrated was up to 1000 km farther than the mean distance radiomarked pintails migrated. Radiomarked pintails were detected at spring migration sites on average 9.9 days (90 % CI 8.0, 11.8) later than ringed pintails that were recovered within 50 km. Although ringed and radiomarked pintails departed from Japan on similar dates, the disparity in detection of radiomarked versus ringed pintails at shared sites increased 7.7 days (90 % CI 5.2, 10.2) for each 1000 km increase in distance from Japan. Thus, pintails marked with satellite transmitters arrived at nesting areas that were 2500 km from Japan on average 19 days later than ringed birds. Radiomarked pintails were detected at autumn migration stopovers on average 13.1 days (90 % CI 9.8, 16.4) later than ringed birds that were recovered within 50 km. We hypothesize that dorsal attachment of 12–20 g satellite transmitters to Northern Pintails increased the energetic cost of flight, which resulted in more rapid depletion of energetic reserves and shortened the distance pintails could fly without refueling. Radiomarked pintails may have used more stopovers or spent longer periods at stopovers. causing their migration schedule to diverge from ringed pintails. We urge further evaluation of the effects of dorsally mounted transmitters on migration chronology of waterfowl.

Influence of convection on microstructure

NASA Technical Reports Server (NTRS)

Wilcox, William R.; Caram, Rubens; Mohanty, A. P.; Seth, Jayshree

1990-01-01

The mechanism responsible for the difference in microstructure caused by solidifying the MnBi-Bi eutectic in space is sought. The objectives for the three year period are as follows: (1) completion of the following theoretical analyses - determination of the influence of the Soret effect on the average solid composition versus distance of off-eutectic mixtures directionally solidified in the absence of convection, determination of the influence of convection on the microstructure of off-eutectic mixtures using a linear velocity profile in the adjacent melt, determination of the influence of volumetric changes during solidification on microconvection near the freezing interface and on microstructure, and determination of the influence of convection on microstructure when the MnBi fibers project out in front of the bismuth matrix; (2) search for patterns in the effect of microgravity on different eutectics (for example, eutectic composition, eutectic temperature, usual microstructure, densities of pure constituents, and density changes upon solidification); and (3) determination of the Soret coefficient and the diffusion coefficient for Mn-Bi melts near the eutectic composition, both through laboratory experiements to be performed here and from data from Shuttle experiments.

Fitness cost of reassortment in human influenza

PubMed Central

Lässig, Michael

2017-01-01

Reassortment, which is the exchange of genome sequence between viruses co-infecting a host cell, plays an important role in the evolution of segmented viruses. In the human influenza virus, reassortment happens most frequently between co-existing variants within the same lineage. This process breaks genetic linkage and fitness correlations between viral genome segments, but the resulting net effect on viral fitness has remained unclear. In this paper, we determine rate and average selective effect of reassortment processes in the human influenza lineage A/H3N2. For the surface proteins hemagglutinin and neuraminidase, reassortant variants with a mean distance of at least 3 nucleotides to their parent strains get established at a rate of about 10−2 in units of the neutral point mutation rate. Our inference is based on a new method to map reassortment events from joint genealogies of multiple genome segments, which is tested by extensive simulations. We show that intra-lineage reassortment processes are, on average, under substantial negative selection that increases in strength with increasing sequence distance between the parent strains. The deleterious effects of reassortment manifest themselves in two ways: there are fewer reassortment events than expected from a null model of neutral reassortment, and reassortant strains have fewer descendants than their non-reassortant counterparts. Our results suggest that influenza evolves under ubiquitous epistasis across proteins, which produces fitness barriers against reassortment even between co-circulating strains within one lineage. PMID:29112968

Oral Hypertonic Saline Is Effective in Reversing Acute Mild-to-Moderate Symptomatic Exercise -Associated Hyponatremia.

PubMed

Bridges, Eileen; Altherwi, Tawfeeq; Correa, José A; Hew-Butler, Tamara

2018-01-23

To determine whether oral administration of 3% hypertonic saline (HTS) is as efficacious as intravenous (IV) 3% saline in reversing symptoms of mild-to-moderate symptomatic exercise-associated hyponatremia (EAH) in athletes during and after a long-distance triathlon. Noninferiority, open-label, parallel-group, randomized control trial to IV or oral HTS. We used permuted block randomization with sealed envelopes, containing the word either "oral" or "IV." Annual long-distance triathlon (3.8-km swim, 180-km bike, and 42-km run) at Mont-Tremblant, Quebec, Canada. Twenty race finishers with mild to moderately symptomatic EAH. Age, sex, race finish time, and 9 clinical symptoms. Time from treatment to discharge. We successfully randomized 20 participants to receive either an oral (n = 11) or IV (n = 9) bolus of HTS. We performed venipuncture to measure serum sodium (Na) at presentation to the medical clinic and at time of symptom resolution after the intervention. The average time from treatment to discharge was 75.8 minutes (SD 29.7) for the IV treatment group and 50.3 minutes (SD 26.8) for the oral treatment group (t test, P = 0.02). Serum Na before and after treatment was not significantly different in both groups. There was no difference on presentation between groups in age, sex, or race finish time, both groups presented with an average of 6 symptoms. Oral HTS is effective in reversing symptoms of mild-to-moderate hyponatremia in EAH.

Determinants of Iran's BilateralIntra-industry Trade in Pharmaceutical Industry.

PubMed

Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

2018-01-01

Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran's bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical's intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran's bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran's bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade.

Qualitative Video Analysis of Track-Cycling Team Pursuit in World-Class Athletes.

PubMed

Sigrist, Samuel; Maier, Thomas; Faiss, Raphael

2017-11-01

Track-cycling team pursuit (TP) is a highly technical effort involving 4 athletes completing 4 km from a standing start, often in less than 240 s. Transitions between athletes leading the team are obviously of utmost importance. To perform qualitative video analyses of transitions of world-class athletes in TP competitions. Videos captured at 100 Hz were recorded for 77 races (including 96 different athletes) in 5 international track-cycling competitions (eg, UCI World Cups and World Championships) and analyzed for the 12 best teams in the UCI Track Cycling TP Olympic ranking. During TP, 1013 transitions were evaluated individually to extract quantitative (eg, average lead time, transition number, length, duration, height in the curve) and qualitative (quality of transition start, quality of return at the back of the team, distance between third and returning rider score) variables. Determination of correlation coefficients between extracted variables and end time allowed assessment of relationships between variables and relevance of the video analyses. Overall quality of transitions and end time were significantly correlated (r = .35, P = .002). Similarly, transition distance (r = .26, P = .02) and duration (r = .35, P = .002) were positively correlated with end time. Conversely, no relationship was observed between transition number, average lead time, or height reached in the curve and end time. Video analysis of TP races highlights the importance of quality transitions between riders, with preferably swift and short relays rather than longer lead times for faster race times.

S-wave attenuation in northeastern Sonora, Mexico, near the faults that ruptured during the earthquake of 3 May 1887 Mw 7.5.

PubMed

Villalobos-Escobar, Gina P; Castro, Raúl R

2014-01-01

We used a new data set of relocated earthquakes recorded by the Seismic Network of Northeastern Sonora, Mexico (RESNES) to characterize the attenuation of S-waves in the fault zone of the 1887 Sonora earthquake (M w 7.5). We determined spectral attenuation functions for hypocentral distances (r) between 10 and 140 km using a nonparametric approach and found that in this fault zone the spectral amplitudes decay slower with distance at low frequencies (f < 4 Hz) compared to those reported in previous studies in the region using more distant recordings. The attenuation functions obtained for 23 frequencies (0.4 ≤ f ≤ 63.1 Hz) permit us estimating the average quality factor Q S  = (141 ± 1.1 )f ((0.74 ± 0.04)) and a geometrical spreading term G(r) = 1/r (0.21). The values of Q estimated for S-wave paths traveling along the fault system that rupture during the 1887 event, in the north-south direction, are considerably lower than the average Q estimated using source-station paths from multiple stations and directions. These results indicate that near the fault zone S waves attenuate considerably more than at regional scale, particularly at low frequencies. This may be the result of strong scattering near the faults due to the fractured upper crust and higher intrinsic attenuation due to stress concentration near the faults.

Assessment of three plastid DNA barcode markers for identification of Clinacanthus nutans (Acanthaceae).

PubMed

Ismail, Noor Zafirah; Arsad, Hasni; Samian, Mohammed Razip; Hamdan, Mohammad Razak; Othman, Ahmad Sofiman

2018-01-01

This study was conducted to determine the feasibility of using three plastid DNA regions ( matK , trnH - psbA , and rbcL ) as DNA barcodes to identify the medicinal plant Clinacanthus nutans . In this study, C. nutans was collected at several different locations. Total genomic DNA was extracted, amplified by polymerase chain reaction (PCR), and sequenced using matK , trnH - psbA , and rbcL , primers. DNA sequences generated from PCR were submitted to the National Center for Biotechnology Information's (NCBI) GenBank. Identification of C. nutans was carried out using NCBI's Basic Local Alignment Search Tool (BLAST). The rbcL and trnH - psbA regions successfully identified C. nutans with sequencing rates of 100% through BLAST identification. Molecular Evolutionary Genetics Analysis (MEGA) 6.0 was used to analyze interspecific and intraspecific divergence of plastid DNA sequences. rbcL and matK exhibited the lowest average interspecific distance (0.0487 and 0.0963, respectively), whereas trnH - psbA exhibited the highest average interspecific distance (0.2029). The R package Spider revealed that trnH - psbA correctly identified Barcode of Life Data System (BOLD) 96%, best close match 79%, and near neighbor 100% of the species, compared to matK (BOLD 72%; best close match 64%; near neighbor 78%) and rbcL (BOLD 77%; best close match 62%; near neighbor 88%). These results indicate that trnH - psbA is very effective at identifying C. nutans , as it performed well in discriminating species in Acanthaceae.

A spline-based non-linear diffeomorphism for multimodal prostate registration.

PubMed

Mitra, Jhimli; Kato, Zoltan; Martí, Robert; Oliver, Arnau; Lladó, Xavier; Sidibé, Désiré; Ghose, Soumya; Vilanova, Joan C; Comet, Josep; Meriaudeau, Fabrice

2012-08-01

This paper presents a novel method for non-rigid registration of transrectal ultrasound and magnetic resonance prostate images based on a non-linear regularized framework of point correspondences obtained from a statistical measure of shape-contexts. The segmented prostate shapes are represented by shape-contexts and the Bhattacharyya distance between the shape representations is used to find the point correspondences between the 2D fixed and moving images. The registration method involves parametric estimation of the non-linear diffeomorphism between the multimodal images and has its basis in solving a set of non-linear equations of thin-plate splines. The solution is obtained as the least-squares solution of an over-determined system of non-linear equations constructed by integrating a set of non-linear functions over the fixed and moving images. However, this may not result in clinically acceptable transformations of the anatomical targets. Therefore, the regularized bending energy of the thin-plate splines along with the localization error of established correspondences should be included in the system of equations. The registration accuracies of the proposed method are evaluated in 20 pairs of prostate mid-gland ultrasound and magnetic resonance images. The results obtained in terms of Dice similarity coefficient show an average of 0.980±0.004, average 95% Hausdorff distance of 1.63±0.48 mm and mean target registration and target localization errors of 1.60±1.17 mm and 0.15±0.12 mm respectively. Copyright © 2012 Elsevier B.V. All rights reserved.

A new cloud and aerosol layer detection method based on micropulse lidar measurements

NASA Astrophysics Data System (ADS)

Zhao, Chuanfeng; Wang, Yuzhao; Wang, Qianqian; Li, Zhanqing; Wang, Zhien; Liu, Dong

2014-06-01

This paper introduces a new algorithm to detect aerosols and clouds based on micropulse lidar measurements. A semidiscretization processing technique is first used to inhibit the impact of increasing noise with distance. The value distribution equalization method which reduces the magnitude of signal variations with distance is then introduced. Combined with empirical threshold values, we determine if the signal waves indicate clouds or aerosols. This method can separate clouds and aerosols with high accuracy, although differentiation between aerosols and clouds are subject to more uncertainties depending on the thresholds selected. Compared with the existing Atmospheric Radiation Measurement program lidar-based cloud product, the new method appears more reliable and detects more clouds with high bases. The algorithm is applied to a year of observations at both the U.S. Southern Great Plains (SGP) and China Taihu sites. At the SGP site, the cloud frequency shows a clear seasonal variation with maximum values in winter and spring and shows bimodal vertical distributions with maximum occurrences at around 3-6 km and 8-12 km. The annual averaged cloud frequency is about 50%. The dominant clouds are stratiform in winter and convective in summer. By contrast, the cloud frequency at the Taihu site shows no clear seasonal variation and the maximum occurrence is at around 1 km. The annual averaged cloud frequency is about 15% higher than that at the SGP site. A seasonal analysis of cloud base occurrence frequency suggests that stratiform clouds dominate at the Taihu site.

Development of an imaging-planning program for screen/film and computed radiography mammography for breasts with short chest wall to nipple distance.

PubMed

Dong, S L; Su, J L; Yeh, Y H; Chu, T C; Lin, Y C; Chuang, K S

2011-04-01

Imaging breasts with a short chest wall to nipple distance (CWND) using a traditional mammographic X-ray unit is a technical challenge for mammographers. The purpose of this study is the development of an imaging-planning program to assist in determination of imaging parameters of screen/film (SF) and computed radiography (CR) mammography for short CWND breasts. A traditional mammographic X-ray unit (Mammomat 3000, Siemens, Munich, Germany) was employed. The imaging-planning program was developed by combining the compressed breast thickness correction, the equivalent polymethylmethacrylate thickness assessment for breasts and the tube loading (mAs) measurement. Both phantom exposures and a total of 597 exposures were used for examining the imaging-planning program. Results of the phantom study show that the tube loading rapidly decreased with the CWND when the automatic exposure control (AEC) detector was not fully covered by the phantom. For patient exposures with the AEC fully covered by breast tissue, the average fractional tube loadings, defined as the ratio of the predicted mAs using the imaging-planning program and mAs of the mammogram, were 1.10 and 1.07 for SF and CR mammograms, respectively. The predicted mAs values were comparable to the mAs values, as determined by the AEC. By applying the imaging-planning program in clinical practice, the experiential dependence of the mammographer for determination of the imaging parameters for short CWND breasts is minimised.

Combining landscape variables and species traits can improve the utility of climate change vulnerability assessments

USGS Publications Warehouse

Nadeau, Christopher P.; Fuller, Angela K.

2016-01-01

Conservation organizations worldwide are investing in climate change vulnerability assessments. Most vulnerability assessment methods focus on either landscape features or species traits that can affect a species vulnerability to climate change. However, landscape features and species traits likely interact to affect vulnerability. We compare a landscape-based assessment, a trait-based assessment, and an assessment that combines landscape variables and species traits for 113 species of birds, herpetofauna, and mammals in the northeastern United States. Our aim is to better understand which species traits and landscape variables have the largest influence on assessment results and which types of vulnerability assessments are most useful for different objectives. Species traits were most important for determining which species will be most vulnerable to climate change. The sensitivity of species to dispersal barriers and the species average natal dispersal distance were the most important traits. Landscape features were most important for determining where species will be most vulnerable because species were most vulnerable in areas where multiple landscape features combined to increase vulnerability, regardless of species traits. The interaction between landscape variables and species traits was important when determining how to reduce climate change vulnerability. For example, an assessment that combines information on landscape connectivity, climate change velocity, and natal dispersal distance suggests that increasing landscape connectivity may not reduce the vulnerability of many species. Assessments that include landscape features and species traits will likely be most useful in guiding conservation under climate change.

[Clinical study of the application of non-invasive porcelain veneer to improve the aesthetic effects in maxillary anterior area].

PubMed

Li, Jian-hui; DI, Ping; Hu, Xiu-lian; Qiu, Li-xin; Cui, Hong-yan; Lin, Ye

2010-02-18

To evaluate the clinical results of application of non-invasive porcelain veneer to reduce the black triangle of implant and adjacent teeth and to improve the aesthetic effect in the maxillary anterior area. The study included 10 patients (Male: 4, Female: 6; average age: 41.5) accessioned during May 2007 to August 2009 in Peking University School of Stomatology. The provisional restorations were delivery on implant after 3-6 months healing period of the implant. The non-invasive porcelain veneers were used in the round tip adjacent teeth with gingival recession in the indicated patients. Main measured parameters on the model included horizontal distance and vertical distance. The Horizontal distance refers to the black triangle bottom which is from adjacent surface of the natural teeth to the implant restoration at the gingival level. The vertical distance is from mid-point of the triangle bottom to the contact point. Clinical observed items included bleeding index (BI), integrity of porcelain veneer and degree of satisfaction of the patients. A total of 14 adjacent natural teeth in 10 patients were cemented with porcelain veneer. No porcelain veneer was lost or fracture during follow-up period (range 6 to 27 months, mean of 10.4 months). Mean bleeding index 0-1. The horizontal distance was reduced from (3.1 + or - 0.8) mm before restoration to (1.1 + or - 0.5) mm after restoration. Vertical distance from (5.3 + or - 1.1) mm to (2.9 + or - 0.7) mm. All patients were satisfied with the clinical result. The data and the experience described in this study indicate that improvement of aesthetic effects by using no-invasive porcelain veneer techniques can be a predictable technique for patients with periodontal disease. Further study is needed to determine the long-term result of the technique.

VizieR Online Data Catalog: Kinematic data for stars in OB-associations (Melnik+, 2017)

NASA Astrophysics Data System (ADS)

Melnik, A. M.; Dambis, A. K.

2017-10-01

Table 1 gives the coordinates and kinematic parameters for OB-associations from the list by Blaha and Humphreys (1989AJ.....98.1598B). It presents the average Galactic coordinates l and b, the average heliocentric distance r, the total number of stars with known photometric measurements, Nt, used for determination of the distance for an OB-association. The distance r is equal to the distance from the catalog by Blaha and Humphreys, rBH, multiplied by a factor of 0.8, r=0.8*rBH. Table 1 also lists the median line-of-sight velocities Vr of OB-associations, the dispersions of line-of-sight velocities, sigma_vr, and the number of stars with known line-of-sight velocity nvr in an OB-association. The line-of-sight velocities of individual stars were taken from the catalog by Barbier-Brossat and Figon (1999, Cat. III/213). We used only the velocities measured with errors of less than 10 km/s which corresponds to the quality estimations A, B, C and D. We also present the median proper motions of OB-associations along l- and b-coordinates, mul and mub, derived from stellar proper motions taken from the catalog TGAS (2016, Cat. I/337), the dispersions of proper motions, sigma_mul and sigma_mub, as well as a number of stars, nmu, with known TGAS proper motions. Table 2 gives the spectral, photometric and kinematic data for stars in OB-associations. It presents the name of a star, the name of the OB-association to which it is assigned by Blaha and Humphreys (1989), spectral type of the star, code of its luminosity class cL: 2 - Ia, 4 - Iab, 6 - Ib, 8 - II, 10 - III, 12 - IV, 14 - V, where the corresponding odd numbers (1, 3,..., 13) reflect the uncertainty in its determination. Table 2 also shows the Galactic coordinates l and b of a star, the heliocentric distance r to its assigned OB-association, the line-of-sight velocity of the star Vr, if available, and its error evr taken from the catalog Barbier-Brossat and Figon (1999, Cat. III/213). Table 2 gives the Hipparcos number HIP (1997, Cat. I/239) of the star, TGAS proper motions, mul and mub, if available, and their errors (2016, Cat. I/337). If a Hipparcos star is absent in the TGAS catalog, then we give its Hipparcos proper motions and their errors (1997, Cat. I/239); flag F indicates the source of proper motions: 'G' means TGAS and 'H' - Hipparcos. Table 2 also presents color indexes B-V and U-B, apparent and absolute magnitudes, mv and Mv, and the V-band extinction, Av, adopted from the catalog by Blaha and Humphreys (1989AJ.....98.1598B). (2 data files).

Spread of dwarf mistletoe from discrete seed sources into young stands of ponderosa and Jeffrey pines

Treesearch

J. R. Parmeter Jr.

1972-01-01

The maximum distance of spread of dwarf mistletoes from isolated overstory pines into surrounding reproduction averages 120 feet. The rate of infection in young trees declined as distance from the seed source increased and was generally greatest in the direction of prevailing winds. This pattern of infection was similar to the previously reported pattern of seed...

Interactive Online Distance Learning at the University of Hawai'i-West O'ahu

ERIC Educational Resources Information Center

Lee, Rebecca

2002-01-01

From its beginnings 25 years ago, the University of Hawai'i-West O'ahu (UH-West O'ahu) has strived to provide its students, mostly working adults with an average age of 32 years, with easy access to classes and advising by maintaining flexible class schedules and office hours. When UH-West O'ahu initiated a distance education program in 1981, the…

Clustering of local group distances: Publication bias or correlated measurements? II. M31 and beyond

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Grijs, Richard; Bono, Giuseppe

2014-07-01

The accuracy of extragalactic distance measurements ultimately depends on robust, high-precision determinations of the distances to the galaxies in the local volume. Following our detailed study addressing possible publication bias in the published distance determinations to the Large Magellanic Cloud (LMC), here we extend our distance range of interest to include published distance moduli to M31 and M33, as well as to a number of their well-known dwarf galaxy companions. We aim at reaching consensus on the best, most homogeneous, and internally most consistent set of Local Group distance moduli to adopt for future, more general use based on themore » largest set of distance determinations to individual Local Group galaxies available to date. Based on a careful, statistically weighted combination of the main stellar population tracers (Cepheids, RR Lyrae variables, and the magnitude of the tip of the red-giant branch), we derive a recommended distance modulus to M31 of (m−M){sub 0}{sup M31}=24.46±0.10 mag—adopting as our calibration an LMC distance modulus of (m−M){sub 0}{sup LMC}=18.50 mag—and a fully internally consistent set of benchmark distances to key galaxies in the local volume, enabling us to establish a robust and unbiased, near-field extragalactic distance ladder.« less

The Statistical Fermi Paradox

NASA Astrophysics Data System (ADS)

Maccone, C.

In this paper is provided the statistical generalization of the Fermi paradox. The statistics of habitable planets may be based on a set of ten (and possibly more) astrobiological requirements first pointed out by Stephen H. Dole in his book Habitable planets for man (1964). The statistical generalization of the original and by now too simplistic Dole equation is provided by replacing a product of ten positive numbers by the product of ten positive random variables. This is denoted the SEH, an acronym standing for “Statistical Equation for Habitables”. The proof in this paper is based on the Central Limit Theorem (CLT) of Statistics, stating that the sum of any number of independent random variables, each of which may be ARBITRARILY distributed, approaches a Gaussian (i.e. normal) random variable (Lyapunov form of the CLT). It is then shown that: 1. The new random variable NHab, yielding the number of habitables (i.e. habitable planets) in the Galaxy, follows the log- normal distribution. By construction, the mean value of this log-normal distribution is the total number of habitable planets as given by the statistical Dole equation. 2. The ten (or more) astrobiological factors are now positive random variables. The probability distribution of each random variable may be arbitrary. The CLT in the so-called Lyapunov or Lindeberg forms (that both do not assume the factors to be identically distributed) allows for that. In other words, the CLT "translates" into the SEH by allowing an arbitrary probability distribution for each factor. This is both astrobiologically realistic and useful for any further investigations. 3. By applying the SEH it is shown that the (average) distance between any two nearby habitable planets in the Galaxy may be shown to be inversely proportional to the cubic root of NHab. This distance is denoted by new random variable D. The relevant probability density function is derived, which was named the "Maccone distribution" by Paul Davies in 2008. 4. A practical example is then given of how the SEH works numerically. Each of the ten random variables is uniformly distributed around its own mean value as given by Dole (1964) and a standard deviation of 10% is assumed. The conclusion is that the average number of habitable planets in the Galaxy should be around 100 million ±200 million, and the average distance in between any two nearby habitable planets should be about 88 light years ±40 light years. 5. The SEH results are matched against the results of the Statistical Drake Equation from reference 4. As expected, the number of currently communicating ET civilizations in the Galaxy turns out to be much smaller than the number of habitable planets (about 10,000 against 100 million, i.e. one ET civilization out of 10,000 habitable planets). The average distance between any two nearby habitable planets is much smaller that the average distance between any two neighbouring ET civilizations: 88 light years vs. 2000 light years, respectively. This means an ET average distance about 20 times higher than the average distance between any pair of adjacent habitable planets. 6. Finally, a statistical model of the Fermi Paradox is derived by applying the above results to the coral expansion model of Galactic colonization. The symbolic manipulator "Macsyma" is used to solve these difficult equations. A new random variable Tcol, representing the time needed to colonize a new planet is introduced, which follows the lognormal distribution, Then the new quotient random variable Tcol/D is studied and its probability density function is derived by Macsyma. Finally a linear transformation of random variables yields the overall time TGalaxy needed to colonize the whole Galaxy. We believe that our mathematical work in deriving this STATISTICAL Fermi Paradox is highly innovative and fruitful for the future.

Determining the standoff distance of the bow shock: Mach number dependence and use of models

NASA Technical Reports Server (NTRS)

Farris, M. H.; Russell, C. T.

1994-01-01

We explore the factors that determine the bow shock standoff distance. These factors include the parameters of the solar wind, as well as the size and shape of the obstacle. In this report we develop a semiempirical Mach number relation for the bow shock standoff distance in order to take into account the shock's behavior at low Mach numbers. This is done by determining which properties of the shock are most important in controlling the standoff distance and using this knowledge to modify the current Mach number relation. While the present relation has proven useful at higher Mach numbers, it has lacked effectiveness at the low Mach number limit. We also analyze the bow shock dependence upon the size and shape of the obstacle, noting that it is most appropriate to compare the standoff distance of the bow shock to the radius of curvature of the obstacle, as opposed to the distance from the focus of the object to the nose. Last, we focus our attention on the use of bow shock models in determining the standoff distance. We note that the physical behavior of the shock must correctly be taken into account, specifically the behavior as a function of solar wind dynamic pressure; otherwise, erroneous results can be obtained for the bow shock standoff distance.

Irreversible reactions and diffusive escape: Stationary properties

DOE PAGES

Krapivsky, Paul L.; Ben-Naim, Eli

2015-05-01

We study three basic diffusion-controlled reaction processes—annihilation, coalescence, and aggregation. We examine the evolution starting with the most natural inhomogeneous initial configuration where a half-line is uniformly filled by particles, while the complementary half-line is empty. We show that the total number of particles that infiltrate the initially empty half-line is finite and has a stationary distribution. We determine the evolution of the average density from which we derive the average total number N of particles in the initially empty half-line; e.g. for annihilationmore » $$\\langle N\\rangle = \\frac{3}{16}+\\frac{1}{4\\π}$$ . For the coalescence process, we devise a procedure that in principle allows one to compute P(N), the probability to find exactly N particles in the initially empty half-line; we complete the calculations in the first non-trivial case (N = 1). As a by-product we derive the distance distribution between the two leading particles.« less

Design, modeling, and analysis of a feedstock logistics system.

PubMed

Judd, Jason D; Sarin, Subhash C; Cundiff, John S

2012-01-01

Given the location of a bio-energy plant for the conversion of biomass to bio-energy, a feedstock logistics system that relies on the use of satellite storage locations (SSLs) for temporary storage and loading of round bales is proposed. Three equipment systems are considered for handling biomass at the SSLs, and they are either placed permanently or are mobile and thereby travel from one SSL to another. A mathematical programming-based approach is utilized to determine SSLs and equipment routes in order to minimize the total cost. The use of a Side-loading Rack System results in average savings of 21.3% over a Densification System while a Rear-loading Rack System is more expensive to operate than either of the other equipment systems. The utilization of mobile equipment results in average savings of 14.8% over the equipment placed permanently. Furthermore, the Densification System is not justifiable for transportation distances less than 81 km. Copyright © 2011 Elsevier Ltd. All rights reserved.

Density probability distribution functions of diffuse gas in the Milky Way

NASA Astrophysics Data System (ADS)

Berkhuijsen, E. M.; Fletcher, A.

2008-10-01

In a search for the signature of turbulence in the diffuse interstellar medium (ISM) in gas density distributions, we determined the probability distribution functions (PDFs) of the average volume densities of the diffuse gas. The densities were derived from dispersion measures and HI column densities towards pulsars and stars at known distances. The PDFs of the average densities of the diffuse ionized gas (DIG) and the diffuse atomic gas are close to lognormal, especially when lines of sight at |b| < 5° and |b| >= 5° are considered separately. The PDF of at high |b| is twice as wide as that at low |b|. The width of the PDF of the DIG is about 30 per cent smaller than that of the warm HI at the same latitudes. The results reported here provide strong support for the existence of a lognormal density PDF in the diffuse ISM, consistent with a turbulent origin of density structure in the diffuse gas.

Lateral distribution of high energy hadrons and gamma ray in air shower cores observed with emulsion chambers

NASA Technical Reports Server (NTRS)

Matano, T.; Machida, M.; Kawasumi, N.; Tsushima, I.; Honda, K.; Hashimoto, K.; Navia, C. E.; Matinic, N.; Aquirre, C.

1985-01-01

A high energy event of a bundle of electrons, gamma rays and hadronic gamma rays in an air shower core were observed. The bundles were detected with an emulsion chamber with thickness of 15 cm lead. This air shower is estimated to be initiated with a proton with energy around 10 to the 17th power to 10 to the 18th power eV at an altitude of around 100 gmc/2. Lateral distributions of the electromagnetic component with energy above 2 TeV and also the hadronic component of energy above 6 TeV of this air shower core were determined. Particles in the bundle are produced with process of the development of the nuclear cascade, the primary energy of each interaction in the cascade which produces these particles is unknown. To know the primary energy dependence of transverse momentum, the average products of energy and distance for various average energies of secondary particles are studied.

Computer-assisted bladder cancer grading: α-shapes for color space decomposition

NASA Astrophysics Data System (ADS)

Niazi, M. K. K.; Parwani, Anil V.; Gurcan, Metin N.

2016-03-01

According to American Cancer Society, around 74,000 new cases of bladder cancer are expected during 2015 in the US. To facilitate the bladder cancer diagnosis, we present an automatic method to differentiate carcinoma in situ (CIS) from normal/reactive cases that will work on hematoxylin and eosin (H and E) stained images of bladder. The method automatically determines the color deconvolution matrix by utilizing the α-shapes of the color distribution in the RGB color space. Then, variations in the boundary of transitional epithelium are quantified, and sizes of nuclei in the transitional epithelium are measured. We also approximate the "nuclear to cytoplasmic ratio" by computing the ratio of the average shortest distance between transitional epithelium and nuclei to average nuclei size. Nuclei homogeneity is measured by computing the kurtosis of the nuclei size histogram. The results show that 30 out of 34 (88.2%) images were correctly classified by the proposed method, indicating that these novel features are viable markers to differentiate CIS from normal/reactive bladder.

The effect of health programs on breastfeeding and child mortality in Peninsular Malaysia.

PubMed

Anderson, K H

1984-01-01

Examining household behavior in Peninsular Malaysia, this study attempts to determine if the availability of certain government health programs significantly alters breastfeeding and if these changes in input prices significantly affect mortality rates and fertility decisions. To explain the interrelationships, an economic model of the demand for infant survival and fertility and the derived demand for breastfeeding is developed. Using household and community level data, the demand equations are then estimated and the results discussed in relation to the predictions of the model and the prospect of additional government inputs. The theoretical model predicts that, if income effects are small: a decline in the price of children (hospital distance) will increase fertility, decrease survival and reduce breastfeeding; a decline in the price of health goods inputs (hospital distance and sanitation) will reduce fertility and increase survival; and a decline in the price of contraceptives (family planning distance) will reduce fertility but increase survival and breastfeeding. The empirical results support some of the model's predictions. In communities with modern sanitation, breastfeeding was shorter on average, as predicted, but differences in mortality were not detected and fertility was actually higher. The latter effect can result from an income effect in the price decline that exceeds the cross substitution effect. Distance to a hospital was positively associated with breastfeeding length. This is expected if the effect of distance on the price of children exceeds the effect of distance on the price of survival. Hospital distance had no impact on either survival or fertility. Distance to a family planning clinic had no effect on breastfeeding or fertility but had a slight positive association with mortality. This positive relationship is expected if fertility and survival are substitutes. Parental schooling and race also are important in determining demand. As economic development proceeds and educational attainment increases, breastfeeding and fertility declined and survival increased. The Chinese, the wealthiest racial group, had lower fertility and mortality and breastfed less than Malays or Indians. The empirical results failed to support the prediction of differences in male and female survival. The results suggest some interesting implications. If breastfeeding has been declining in low income countries such as Malaysia as they develop, the culprit may be the economic development process itself, which increases the value of a woman's time and raises family income. The decline in breastfeeding does not necessarily imply a significant increase in infant mortality if good substitutes for breastfeeding exist. In addition, breastfeeding is highly substitutable with many government programs designed to reduce mortality. In designing policies which will bring about a decline in infant mortality rates, both cross substitution and joint production must be considered. Programs that can be most successful in reducing mortality will be the programs that are the least substitutable with breastfeeding.

The Gaussian atmospheric transport model and its sensitivity to the joint frequency distribution and parametric variability.

PubMed

Hamby, D M

2002-01-01

Reconstructed meteorological data are often used in some form of long-term wind trajectory models for estimating the historical impacts of atmospheric emissions. Meteorological data for the straight-line Gaussian plume model are put into a joint frequency distribution, a three-dimensional array describing atmospheric wind direction, speed, and stability. Methods using the Gaussian model and joint frequency distribution inputs provide reasonable estimates of downwind concentration and have been shown to be accurate to within a factor of four. We have used multiple joint frequency distributions and probabilistic techniques to assess the Gaussian plume model and determine concentration-estimate uncertainty and model sensitivity. We examine the straight-line Gaussian model while calculating both sector-averaged and annual-averaged relative concentrations at various downwind distances. The sector-average concentration model was found to be most sensitive to wind speed, followed by horizontal dispersion (sigmaZ), the importance of which increases as stability increases. The Gaussian model is not sensitive to stack height uncertainty. Precision of the frequency data appears to be most important to meteorological inputs when calculations are made for near-field receptors, increasing as stack height increases.

Weather explains high annual variation in butterfly dispersal

PubMed Central

Rytteri, Susu; Heikkinen, Risto K.; Heliölä, Janne; von Bagh, Peter

2016-01-01

Weather conditions fundamentally affect the activity of short-lived insects. Annual variation in weather is therefore likely to be an important determinant of their between-year variation in dispersal, but conclusive empirical studies are lacking. We studied whether the annual variation of dispersal can be explained by the flight season's weather conditions in a Clouded Apollo (Parnassius mnemosyne) metapopulation. This metapopulation was monitored using the mark–release–recapture method for 12 years. Dispersal was quantified for each monitoring year using three complementary measures: emigration rate (fraction of individuals moving between habitat patches), average residence time in the natal patch, and average distance moved. There was much variation both in dispersal and average weather conditions among the years. Weather variables significantly affected the three measures of dispersal and together with adjusting variables explained 79–91% of the variation observed in dispersal. Different weather variables became selected in the models explaining variation in three dispersal measures apparently because of the notable intercorrelations. In general, dispersal rate increased with increasing temperature, solar radiation, proportion of especially warm days, and butterfly density, and decreased with increasing cloudiness, rainfall, and wind speed. These results help to understand and model annually varying dispersal dynamics of species affected by global warming. PMID:27440662

Using a motion capture system for spatial localization of EEG electrodes

PubMed Central

Reis, Pedro M. R.; Lochmann, Matthias

2015-01-01

Electroencephalography (EEG) is often used in source analysis studies, in which the locations of cortex regions responsible for a signal are determined. For this to be possible, accurate positions of the electrodes at the scalp surface must be determined, otherwise errors in the source estimation will occur. Today, several methods for acquiring these positions exist but they are often not satisfyingly accurate or take a long time to perform. Therefore, in this paper we describe a method capable of determining the positions accurately and fast. This method uses an infrared light motion capture system (IR-MOCAP) with 8 cameras arranged around a human participant. It acquires 3D coordinates of each electrode and automatically labels them. Each electrode has a small reflector on top of it thus allowing its detection by the cameras. We tested the accuracy of the presented method by acquiring the electrodes positions on a rigid sphere model and comparing these with measurements from computer tomography (CT). The average Euclidean distance between the sphere model CT measurements and the presented method was 1.23 mm with an average standard deviation of 0.51 mm. We also tested the method with a human participant. The measurement was quickly performed and all positions were captured. These results tell that, with this method, it is possible to acquire electrode positions with minimal error and little time effort for the study participants and investigators. PMID:25941468

Level-energy-dependent mean velocities of excited tungsten atoms sputtered by krypton-ion bombardment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nogami, Keisuke; Sakai, Yasuhiro; Mineta, Shota

2015-11-15

Visible emission spectra were acquired from neutral atoms sputtered by 35–60 keV Kr{sup +} ions from a polycrystalline tungsten surface. Mean velocities of excited tungsten atoms in seven different 6p states were also obtained via the dependence of photon intensities on the distance from the surface. The average velocities parallel to the surface normal varied by factors of 2–4 for atoms in the different 6p energy levels. However, they were almost independent of the incident ion kinetic energy. The 6p-level energy dependence indicated that the velocities of the excited atoms were determined by inelastic processes that involve resonant charge exchange.

Spectral characteristics of plasma sheet ion and electron populations during undisturbed geomagnetic conditions

NASA Technical Reports Server (NTRS)

Christon, S. P.; Williams, D. J.; Mitchell, D. G.; Frank, L. A.; Huang, C. Y.

1989-01-01

The spectral characteristics of plasma-sheet ion and electron populations during periods of low geomagnetic activity were determined from the analysis of 127 one-hour average samples of central plasma sheet ions and electrons. Particle data from the ISEE-1 low-energy proton and electron differential energy analyzer and medium-energy particle instrument were combined to obtain differential energy spectra in the plasma sheet at geocentric radial distances above 12 earth radii. The relationships between the ion and electron spectral shapes and between the spectral shapes and the geomagnetic activity index were statistically investigated. It was found that the presence of interplanetary particle fluxes does not affect the plasma sheet particle spectral shape.

The dark-matter axion mass

NASA Astrophysics Data System (ADS)

Klaer, Vincent B.; Moore, Guy D.

2017-11-01

We evaluate the efficiency of axion production from spatially random initial conditions in the axion field, so a network of axionic strings is present. For the first time, we perform numerical simulations which fully account for the large short-distance contributions to the axionic string tension, and the resulting dense network of high-tension axionic strings. We find nevertheless that the total axion production is somewhat less efficient than in the angle-averaged misalignment case. Combining our results with a recent determination of the hot QCD topological susceptibility [1], we find that if the axion makes up all of the dark matter, then the axion mass is ma = 26.2 ± 3.4 μeV.

H0LiCOW - III. Quantifying the effect of mass along the line of sight to the gravitational lens HE 0435-1223 through weighted galaxy counts★

NASA Astrophysics Data System (ADS)

Rusu, Cristian E.; Fassnacht, Christopher D.; Sluse, Dominique; Hilbert, Stefan; Wong, Kenneth C.; Huang, Kuang-Han; Suyu, Sherry H.; Collett, Thomas E.; Marshall, Philip J.; Treu, Tommaso; Koopmans, Leon V. E.

2017-06-01

Based on spectroscopy and multiband wide-field observations of the gravitationally lensed quasar HE 0435-1223, we determine the probability distribution function of the external convergence κext for this system. We measure the under/overdensity of the line of sight towards the lens system and compare it to the average line of sight throughout the Universe, determined by using the CFHTLenS (The Canada France Hawaii Lensing Survey) as a control field. Aiming to constrain κext as tightly as possible, we determine under/overdensities using various combinations of relevant informative weighting schemes for the galaxy counts, such as projected distance to the lens, redshift and stellar mass. We then convert the measured under/overdensities into a κext distribution, using ray-tracing through the Millennium Simulation. We explore several limiting magnitudes and apertures, and account for systematic and statistical uncertainties relevant to the quality of the observational data, which we further test through simulations. Our most robust estimate of κext has a median value κ^med_ext = 0.004 and a standard deviation σκ = 0.025. The measured σκ corresponds to 2.5 per cent relative uncertainty on the time delay distance, and hence the Hubble constant H0 inferred from this system. The median κ^med_ext value varies by ˜0.005 with the adopted aperture radius, limiting magnitude and weighting scheme, as long as the latter incorporates galaxy number counts, the projected distance to the main lens and a prior on the external shear obtained from mass modelling. This corresponds to just ˜0.5 per cent systematic impact on H0. The availability of a well-constrained κext makes HE 0435-1223 a valuable system for measuring cosmological parameters using strong gravitational lens time delays.

A flowing partially penetrating well in a finite-thickness aquifer: a mixed-type initial boundary value problem

NASA Astrophysics Data System (ADS)

Chang, Chien-Chieh; Chen, Chia-Shyun

2003-02-01

An analytical approach using integral transform techniques is developed to deal with a well hydraulics model involving a mixed boundary of a flowing partially penetrating well, where constant drawdown is stipulated along the well screen and no-flux condition along the remaining unscreened part. The aquifer is confined of finite thickness. First, the mixed boundary is changed into a homogeneous Neumann boundary by discretizing the well screen into a finite number of segments, each of which at constant drawdown is subject to unknown a priori well bore flux. Then, the Laplace and the finite Fourier transforms are used to solve this modified model. Finally, the prescribed constant drawdown condition is reinstated to uniquely determine the well bore flux function, and to restore the relation between the solution and the original model. The transient and the steady-state solutions for infinite aquifer thickness can be derived from the semi-analytical solution, complementing the currently available dual integral solution. If the distance from the edge of the well screen to the bottom/top of the aquifer is 100 times greater than the well screen length, aquifer thickness can be assumed infinite for times of practical significance, and groundwater flow can reach a steady-state condition, where the well will continuously supply water under a constant discharge. However, if aquifer thickness is smaller, the well discharge decreases with time. The partial penetration effect is most pronounced in the vicinity of the flowing well, decreases with increasing horizontal distance, and vanishes at distances larger than 1-2 times the aquifer thickness divided by the square root of aquifer anisotropy. The horizontal hydraulic conductivity and the specific storage coefficient can be determined from vertically averaged drawdown as measured by fully penetrating observation wells. The vertical hydraulic conductivity can be determined from the well discharge under two particular partial penetration conditions.

Heliocentric Distance of Coronal Mass Ejections at the Time of Energetic Particle Release: Revisiting the Ground Level Enhancement Events of Solar Cycle 23

NASA Technical Reports Server (NTRS)

Gopalswamy, Natchimuthuk

2011-01-01

Using the kinematics of coronal mass ejections (CMEs), onset time of soft X-ray flares, and the finite size of the pre-eruption CME structure, we derive the heliocentric distane at which the energetic particles during the ground level enhancement (GLE) events of Solar Cycle 23. We find that the GLE particles are released when the CMEs reach an average heliocentric distance of approx.3.25 solar radii (Rs). From this we infer that the shocks accelerating the particles are located at similar heights. Type II radio burst observations indicate that the CMEs are at much lower distances (average approx.1.4 Rs) when the CME-driven shock first forms. The shock seems to travel approx.1.8 Rs over a period of approox.30 min on the average before releasing the GLE particles. In deriving these results, we made three assumptions that have observational support: (i) the CME lift off occurs from an initial distance of about 1.25 Rs; (ii) the flare onset and CME onset are one and the same because these are two different manifestations of the same eruption; and (iii) the CME has positive acceleration from the onset to the first appearance in the coronagraphic field of view (2.5 to 6 Rs). Observations of coronal cavities in eclipse pictures and in coronagraphic images justify the assumption (i). The close relationship between the flare reconnection magnetic flux and the azimuthal flux of interplanetary magnetic clouds justify assumption (ii) consistent with the standard model (CSHKP) of solar eruption. Coronagraphic observations made close to the solar surface indicate a large positive acceleration of CMEs to a heliocentric distance of approx.3 Rs before they start slowing down due to the drag force. The inferred acceleration (approx.1.5 km/s/s) is consistent with reported values in the literature.

Airborne endotoxin concentrations at a large open-lot dairy in southern idaho.

PubMed

Dungan, Robert S; Leytem, April B

2009-01-01

Endotoxins are derived from gram-negative bacteria and are a potential respiratory health risk for animals and humans. To determine the potential for endotoxin transport from a large open-lot dairy, total airborne endotoxin concentrations were determined at an upwind location (background) and five downwind locations on three separate days. The downwind locations were situated at of the edge of the lot, 200 and 1390 m downwind from the lot, and downwind from a manure composting area and wastewater holding pond. When the wind was predominantly from the west, the average endotoxin concentration at the upwind location was 24 endotoxin units (EU) m(-3), whereas at the edge of the lot on the downwind side it was 259 EU m(-3). At 200 and 1390 m downwind from the edge of the lot, the average endotoxin concentrations were 168 and 49 EU m(-3), respectively. Average airborne endotoxin concentrations downwind from the composting site (36 EU m(-3)) and wastewater holding pond (89 EU m(-3)) and 1390 m from the edge of the lot were not significantly different from the upwind location. There were no significant correlations between ambient weather data collected and endotoxin concentrations over the experimental period. The downwind data show that the airborne endotoxin concentrations decreased exponentially with distance from the lot edge. Decreasing an individual's proximity to the dairy should lower their risk of airborne endotoxin exposure and associated health effects.

Manpower Development for Workers in Tertiary Institutions: Distance Learning Approach

ERIC Educational Resources Information Center

Hassan, Moshood Ayinde

2011-01-01

The purpose of this study is to determine the extent to which workers patronize distance learning approach to further their education. Other purposes include: determine problems facing workers in the process of improving their knowledge and skills through distance learning approach; establish the level of attainment of manpower development…

Synthesis and crystalline properties of CdS incorporated polyvinylidene fluoride (PVDF) composite film

NASA Astrophysics Data System (ADS)

Patel, Arunendra Kumar; Sunder, Aishwarya; Mishra, Shweta; Bajpai, Rakesh

2018-05-01

This paper gives an insight on the synthesis and crystalline properties of Polyvinylidene Fluoride (PVDF) (host matrix) composites impregnated with Cadmium Sulphide (CdS) using Dimethyl formamide (DMF) as the base, prepared by the well known solvent casting technique. The effect of doping concentration of CdS in to the PVDF matrix was studied using X-ray diffraction technique. The structural properties like crystallinity Cr, interplanar distance d, average size of the crystalline region (D), and average inter crystalline separation (R) have been estimated for the developed composite. The crystallinity index, crystallite size and inter crystalline separation is increasing with increase in the concentration of CdS in to the PVDF matrix while the interplanar distance d is decreasing.

Factors Influencing Enrollment in the Medication Therapy Management Clinic at an Academic Ambulatory Care Clinic.

PubMed

Shah, Mansi; Tilton, Jessica; Kim, Shiyun

2016-04-01

In 2001, the University of Illinois Hospital and Health Sciences System (UI Health) established a pharmacist-run, referral-based medication therapy management clinic (MTMC). Referrals are obtained from any UI Health provider or by self-referral. Although there is a high volume of referrals, a large percentage of patients do not enroll. This study was designed to determine the various factors that influence patient enrollment in the MTMC. This study was a retrospective chart review of demographic and patient variable data during years 2010 and 2011. Disabilities, distance from MTMC, mode of transportation, past medical history, and appointment dates were extracted from the medical records. Results were analyzed using descriptive statistics and logistic regression analysis. A total of 103 referrals were made; however, only 17% of patients remain enrolled in MTMC. The baseline demographics included a mean age of 63 years, 68% female, 70% African American, and 81% English speaking. Patients lived an average of 8 miles from MTMC; most utilized public or government-supplemented transport services; 24% of patients reported some type of disability, most commonly utilizing a walker or a wheelchair. On average, patients were prescribed 13 medications with hypertension (70%), diabetes (56%), and hyperlipidemia (48%) being the most common chronic disease states. The reason for referral included medication management, education, medication reconciliation, and disease state management. Five patients were unable to be contacted to schedule an initial appointment. Additionally, 18 patients failed their scheduled initial appointment and did not reschedule. Logistic regression analysis demonstrated distance traveled for clinic visit, age, and history of hypertension affected the probability of patients showing for their appointments (chi-square = 19.7, P < .001). This study demonstrated that distance from MTMC is the most common barrier in patient enrollment; therefore, strategies to improve patient access are necessary. © The Author(s) 2014.

Relationships Between Results Of An Internal And External Match Load Determining Method In Male, Singles Badminton Players.

PubMed

Abdullahi, Yahaya; Coetzee, Ben; Van den Berg, Linda

2017-07-03

The study purpose was to determine relationships between results of internal and external match load determining methods. Twenty-one players, who participated in selected badminton championships during the 2014/2015 season served as subjects. The heart rate (HR) values and GPS data of each player were obtained via a fix Polar HR Transmitter Belt and MinimaxX GPS device. Moderate significant Spearman's rank correlations were found between HR and absolute duration (r = 0.43 at a low intensity (LI) and 0.44 at a high intensity (HI)), distance covered (r = 0.42 at a HI) and player load (PL) (r = 0.44 at a HI). Results also revealed an opposite trend for external and internal measures of load as the average relative HR value was found to be the highest for the HI zone (54.1%) compared to the relative measures of external load where average values (1.29-9.89%) were the lowest for the HI zone. In conclusion, our findings show that results of an internal and external badminton match load determining method are more related to each other in the HI zone than other zones and that the strength of relationships depend on the duration of activities that are performed in especially LI and HI zones. Overall, trivial to moderate relationships between results of an internal and external match load determining method in male, singles badminton players reaffirm the conclusions of others that these constructs measure distinctly different demands and should therefore be measured concurrently to fully understand the true requirements of badminton match play.

46 CFR 163.002-21 - Approval tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... raised and lowered under power operation until a total distance of at least 150 meters (500 feet) has... least 5 meters (16 feet). The average speed of raising the ladder or lift platform and the average lowering speed during this test must both be between 15 and 21 meters per minute (50 and 70 feet per minute...

Time-Distance Sunspot Seismology with GONG Data

NASA Astrophysics Data System (ADS)

Braun, D. C.

1997-09-01

We present time-distance analyses of several active regions and a region of quiet Sun observed with the Global Oscillation Network Group (GONG). Analyzing temporal correlations between the p-mode oscillation signal observed within the sunspots with the signals integrated within surrounding annuli, we confirm the recent finding of Duvall and his colleagues that travel times (τ+) for outward propagating p-modes are smaller by approximately 1 minute than corresponding inward travel times (τ-). We also analyze correlations of the oscillation signal integrated within annuli of different radii. By varying the radius of the inner annulus (that which is closer to the target) we show that the radial extent of the region giving rise to the travel time perturbations is coincident with the outer boundary of the sunspot penumbrae. A comparison of independent methods designed to determine the mean travel time perturbations of p-modes passing through the sunspots is made. We find the surprising result that time-distance correlations that do not utilize the signal within the sunspot itself (employing ``two-skip'' trajectories) yield mean travel times that differ substantially from the average of τ+ and τ- and that are significantly closer in agreement with times predicted from scattering phase shifts measured by Hankel decomposition techniques. These observations suggest that it unlikely that Doppler shifts caused by subsurface flows are responsible for the travel time differences determined from center-annuli correlations targeted on sunspots. This work utilizes data obtained by the Global Oscillation Network Group (GONG) project, managed by the National Solar Observatory, a Division of the National Optical Astronomy Observatories, which is operated by AURA, Inc., under a cooperative agreement with the National Science Foundation.

Voice amplification as a means of reducing vocal load for elementary music teachers.

PubMed

Morrow, Sharon L; Connor, Nadine P

2011-07-01

Music teachers are over four times more likely than classroom teachers to develop voice disorders and greater than eight times more likely to have voice-related problems than the general public. Research has shown that individual voice-use parameters of phonation time, fundamental frequency and vocal intensity, as well as vocal load as calculated by cycle dose and distance dose are significantly higher for music teachers than their classroom teacher counterparts. Finding effective and inexpensive prophylactic measures to decrease vocal load for music teachers is an important aspect for voice preservation for this group of professional voice users. The purpose of this study was to determine the effects of voice amplification on vocal intensity and vocal load in the workplace as measured using a KayPENTAX Ambulatory Phonation Monitor (APM) (KayPENTAX, Lincoln Park, NJ). Seven music teachers were monitored for 1 workweek using an APM to determine average vocal intensity (dB sound pressure level [SPL]) and vocal load as calculated by cycle dose and distance dose. Participants were monitored a second week while using a voice amplification unit (Asyst ChatterVox; Asyst Communications Company, Inc., Indian Creek, IL). Significant decreases in mean vocal intensity of 7.00-dB SPL (P<0.001) were found using amplification, along with significant decreases (P=0.001) in cycle dose and distance dose. In addition, mean phonation time was found to decrease using amplification (P=0.023). These data suggest that voice amplification may be an effective intervention to decrease the potentially damaging vocal loads experienced by elementary music teachers in the classroom. Copyright © 2011 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

New velocimetry and revised cartography of the spiral arms in the Milky Way—a consistent symbiosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallée, Jacques P., E-mail: jacques.vallee@cnrc.gc.ca

Recent advances in the determinations of the positions (pitch angle, shape, numbers, interarm separation) and velocities (rotation curve) of the spiral arms are evaluated and compared to previous determinations. Based on these results, an average cartographic model is developed that fits the means of basic input data and provides predictions for the locations of the arms in the Milky Way, for each galactic quadrant. For each spiral arm segment in each galactic quadrant, the LSR radial velocities are calculated for the radial distance as well as for its galactic longitude. From our velocimetric model, arm intercepts (between line of sightsmore » and spiral arms) are indicated in velocity space and may be used to find the distance and velocity to any arm, in a given longitude range. Velocity comparisons between model predictions and published CO velocity distribution are done for each galactic quadrant, with good results. Our velocimetric model is not hydromagnetic in character, nor is it a particle-simulation scheme, yet it is simple to use for comparisons with the observations and it is in symbiosis and consistent with our cartographic model (itself simple to use for comparisons with observations). A blending in velocity of the Perseus and Cygnus arms is further demonstrated, as well as an apparent longitude-velocity blending of the starting points of the four spiral arms near 4 kpc (not a physical ring). An integrated (distance, velocity) model for the mass in the disk is employed, to yield the total mass of 3.0 × 10{sup 11} M{sub ☉} within a galactic radius of 28 kpc.« less

The effect of sensor sheltering and averaging techniques on wind measurements at the Shuttle Landing Facility

NASA Technical Reports Server (NTRS)

Merceret, Francis J.

1995-01-01

This document presents results of a field study of the effect of sheltering of wind sensors by nearby foliage on the validity of wind measurements at the Space Shuttle Landing Facility (SLF). Standard measurements are made at one second intervals from 30-feet (9.1-m) towers located 500 feet (152 m) from the SLF centerline. The centerline winds are not exactly the same as those measured by the towers. A companion study, Merceret (1995), quantifies the differences as a function of statistics of the observed winds and distance between the measurements and points of interest. This work examines the effect of nearby foliage on the accuracy of the measurements made by any one sensor, and the effects of averaging on interpretation of the measurements. The field program used logarithmically spaced portable wind towers to measure wind speed and direction over a range of conditions as a function of distance from the obstructing foliage. Appropriate statistics were computed. The results suggest that accurate measurements require foliage be cut back to OFCM standards. Analysis of averaging techniques showed that there is no significant difference between vector and scalar averages. Longer averaging periods reduce measurement error but do not otherwise change the measurement in reasonably steady flow regimes. In rapidly changing conditions, shorter averaging periods may be required to capture trends.

MENTOR: Adding an outlying receiver to an ST radar for meteor-wind measurement

NASA Technical Reports Server (NTRS)

Roper, R. G.

1984-01-01

Radar scattering from ionized meteor trails has been used for many years as a way to determine mesopause-level winds. Scattering occurs perpendicular to the trails, and since the ionizing efficiency of the incoming meteoroids depends on the cosine of the zenith angle of the radiant, echoes directly overhead are rare. Stratosphere-troposphere (ST) radars normally sample within 15 deg of the vertical, and thus receive few meteor echoes. Even the higher powdered mesosphere-stratosphere-troposphere (MST) radars are not good meteor radars, although they were used to successfully retrieved meteor winds from the Poker Flat, Alaska MST radar by averaging long data intervals. It has been suggested that a receiving station some distance from an ST radar could receive pulses being scattered from meteor trails, determine the particular ST beam in which the scattering occurred, measure the radial Doppler velocity, and thus determine the wind field. This concept has been named MENTOR (Meteor Echoes; No Transmitter, Only Receivers).

On the Determination of the Orbits of Comets

NASA Astrophysics Data System (ADS)

Englefield, Henry

2013-06-01

Preface; 1. General view of the method; 2. On the motion of the point of intersection of the radius vector and cord; 3. On the comparison of the parabolic cord with the space which answers to the mean velocity of the earth in the same time; 4. Of the reduction of the second longitude of the comet; 5. On the proportion of the three curtate distances of the comet from the earth; 6. Of the graphical declination of the orbit of the earth; 7. Of the numerical quantities to be prepared for the construction or computation of the comet's orbit; 8. Determination of the distances of the comet from the earth and the sun; 9. Determination of the elements of the orbit from the determined distances; 10. Determination of the place of the comet from the earth and sun; 11. Determination of the distances of the comet from the earth and sun; 12. Determination of the comet's orbit; 13. Determination of the place of the comet; 14. Application of the graphical method to the comet of 1769; 15. Application of the distances found; 16. Determination of the place of the comet, for another given time; 17. Application of the trigonometrical method to the comet of 1769; 18. Determination of the elements of the orbit of the comet of 1769; Example of the graphical operation for the orbit of the comet of 1769; Example of the trigonometrical operation for the orbit of the comet of 1769; Conclusion; La Place's general method for determining the orbits of comets; Determination of the two elements of the orbit; Application of La Place's method of finding the approximate perihelion distance; Application of La Place's method for correcting the orbit of a comet, to the comet of 1769; Explanation and use of the tables; Tables; Appendix; Plates.

Discovery of polarized light scattered by dust around Alpha Orionis

NASA Technical Reports Server (NTRS)

Mcmillan, R. S.; Tapia, S.

1978-01-01

Following the suggestion by Jura and Jacoby (1976), linearly polarized blue continuum starlight scattered by the dust shell around the M2 Iab star Alpha Orionis (Betelgeuse) has been discovered. The polarization has been traced in the NE, NW, SE, and SW directions and has positive (tangential) orientation. Some asymmetry of the optical depth in the shell exists 15 and 30 arcsec from the star. In the NE direction the polarization was measured as far as 90 arcsec (17,000 AU) from the star. The dependence of the average intensity of the scattered light from the nebula on angular distance from the star is more consistent with an inverse-square density law than with inverse 1.5 or inverse-cube laws. Assuming that the density is proportional to the inverse square of distance from the star, the scattering optical depth in blue light along a radius of 0.03 arcsec is no more than 0.15 + or - 0.05. Future observations of the wavelength dependence of polarization will allow a determination of grain size.

Soliton concepts and protein structure

NASA Astrophysics Data System (ADS)

Krokhotin, Andrei; Niemi, Antti J.; Peng, Xubiao

2012-03-01

Structural classification shows that the number of different protein folds is surprisingly small. It also appears that proteins are built in a modular fashion from a relatively small number of components. Here we propose that the modular building blocks are made of the dark soliton solution of a generalized discrete nonlinear Schrödinger equation. We find that practically all protein loops can be obtained simply by scaling the size and by joining together a number of copies of the soliton, one after another. The soliton has only two loop-specific parameters, and we compute their statistical distribution in the Protein Data Bank (PDB). We explicitly construct a collection of 200 sets of parameters, each determining a soliton profile that describes a different short loop. The ensuing profiles cover practically all those proteins in PDB that have a resolution which is better than 2.0 Å, with a precision such that the average root-mean-square distance between the loop and its soliton is less than the experimental B-factor fluctuation distance. We also present two examples that describe how the loop library can be employed both to model and to analyze folded proteins.

The Relaxation of Vicinal (001) with ZigZag [110] Steps

NASA Astrophysics Data System (ADS)

Hawkins, Micah; Hamouda, Ajmi Bh; González-Cabrera, Diego Luis; Einstein, Theodore L.

2012-02-01

This talk presents a kinetic Monte Carlo study of the relaxation dynamics of [110] steps on a vicinal (001) simple cubic surface. This system is interesting because [110] steps have different elementary excitation energetics and favor step diffusion more than close-packed [100] steps. In this talk we show how this leads to relaxation dynamics showing greater fluctuations on a shorter time scale for [110] steps as well as 2-bond breaking processes being rate determining in contrast to 3-bond breaking processes for [100] steps. The existence of a steady state is shown via the convergence of terrace width distributions at times much longer than the relaxation time. In this time regime excellent fits to the modified generalized Wigner distribution (as well as to the Berry-Robnik model when steps can overlap) were obtained. Also, step-position correlation function data show diffusion-limited increase for small distances along the step as well as greater average step displacement for zigzag steps compared to straight steps for somewhat longer distances along the step. Work supported by NSF-MRSEC Grant DMR 05-20471 as well as a DOE-CMCSN Grant.

Variables en la región central del cúmulo globular NGC 3201: descomposición de Fourier de las curvas de luz de las RR Lyrae y análisis de la relación período-luminosidad de las SX Phoenicis

NASA Astrophysics Data System (ADS)

Ahumada, J. A.; Arellano Ferro, A.; Calderón, J. H.; Kains, N.

2015-08-01

We present CCD time-series observations of the central region of the globular cluster NGC 3201, collected from CASLEO in March 2013, with the aim of performing the Fourier decomposition of the light curves of the RR Lyrae variables. This procedure, applied to the RRab-type stars, gave a mean value [Fe/H], for the cluster metallicity, and 5.00 0.22 kpc, for the cluster distance. The values found from two RRc stars are consistent with those derived previously. Because of differential reddening across the cluster field, individual reddenings for the RRab stars were estimated from their curves, resulting in an average value . An investigation of the light curves of stars in the blue straggler region led to the discovery of three new SX Phoenicis variables. The period-luminosity relation of the SX Phoenicis was used for an independent determination of the distance to the cluster and of the individual reddenings of these variables.

Exposure Perception as a Key Indicator of Risk Perception and Acceptance of Sources of Radio Frequency Electromagnetic Fields.

PubMed

Freudenstein, Frederik; Wiedemann, Peter M; Brown, Tim W C

2015-01-01

The presented survey was conducted in six European countries as an online study. A total of 2454 subjects participated. Two main research questions were investigated: firstly, how does the cognitive, moral, and affective framing of radio frequency electromagnetic field (RF EMF) exposure perception influence RF EMF risk perception? Secondly, can the deployment of mobile phone base stations have greater acceptance with RF EMF exposure reduction? The findings with respect to the first question clearly indicated that the cognitive framed exposure perception is the main determinant of RF EMF risk perception. The concomitant sensitivity to exposure strength offers an opportunity to improve the acceptance of base stations by exposure reduction. A linear regression analysis supported this assumption: in a fictional test situation, exposure reduction improved the acceptance of base stations, operationalized as the requested distance of the base station from one's own home. Furthermore, subjects with high RF EMF risk perception were most sensitive to exposure reduction. On average, a 70% exposure reduction reduced the requested distance from about 2000 meters to 1000 meters. The consequences for risk communication are discussed.

Local and average structures of BaTiO 3-Bi(Zn 1/2Ti 1/2)O 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Usher, Tedi-Marie; Iamsasri, Thanakorn; Forrester, Jennifer S.

The complex crystallographic structures of (1-x)BaTiO 3-xBi(Zn 1/2Ti 1/2)O 3 (BT-xBZT) are examined using high resolution synchrotron X-ray diffraction, neutron diffraction, and neutron pair distribution function (PDF) analyses. The short-range structures are characterized from the PDFs, and a combined analysis of the X-ray and neutron diffraction patterns is used to determine the long-range structures. Our results demonstrate that the structure appears different when averaged over different length scales. In all compositions, the local structures determined from the PDFs show local tetragonal distortions (i.e., c/a > 1). But, a box-car fitting analysis of the PDFs reveals variations at different length scales.more » For 0.80BT-0.20BZT and 0.90BT-0.10BZT, the tetragonal distortions decrease at longer atom-atom distances (e.g., 30 vs. 5 ). When the longest distances are evaluated (r > 40 ), the lattice parameters approach cubic. Neutron and X-ray diffraction yield further information about the long-range structure. Compositions 0.80BT-0.20BZT and 0.90BT-0.10BZT appear cubic by Bragg diffraction (no peak splitting), consistent with the PDFs at long distances. However, these patterns cannot be adequately fit using a cubic lattice model; modeling their structures with the P4mm space group allows for a better fit to the patterns because the space group allows for c-axis atomic displacements that occur at the local scale. Furthermore, for the compositions 0.92BT-0.08BZT and 0.94BT-0.06BZT, strong tetragonal distortions are observed at the local scale and a less-distorted tetragonal structure is observed at longer length scales. In Rietveld refinements, the latter is modeled using a tetragonal phase. Since the peak overlap in these two-phase compositions limits the ability to model the local-scale structures as tetragonal, it is approximated in the refinements as a cubic phase. These results demonstrate that alloying BT with BZT results in increased disorder and disrupts the long-range ferroelectric symmetry present in BT, while the large tetragonal distortion present in BZT persists at the local scale.« less

Local and average structures of BaTiO 3-Bi(Zn 1/2Ti 1/2)O 3

DOE PAGES

Usher, Tedi-Marie; Iamsasri, Thanakorn; Forrester, Jennifer S.; ...

2016-11-11

The complex crystallographic structures of (1-x)BaTiO 3-xBi(Zn 1/2Ti 1/2)O 3 (BT-xBZT) are examined using high resolution synchrotron X-ray diffraction, neutron diffraction, and neutron pair distribution function (PDF) analyses. The short-range structures are characterized from the PDFs, and a combined analysis of the X-ray and neutron diffraction patterns is used to determine the long-range structures. Our results demonstrate that the structure appears different when averaged over different length scales. In all compositions, the local structures determined from the PDFs show local tetragonal distortions (i.e., c/a > 1). But, a box-car fitting analysis of the PDFs reveals variations at different length scales.more » For 0.80BT-0.20BZT and 0.90BT-0.10BZT, the tetragonal distortions decrease at longer atom-atom distances (e.g., 30 vs. 5 ). When the longest distances are evaluated (r > 40 ), the lattice parameters approach cubic. Neutron and X-ray diffraction yield further information about the long-range structure. Compositions 0.80BT-0.20BZT and 0.90BT-0.10BZT appear cubic by Bragg diffraction (no peak splitting), consistent with the PDFs at long distances. However, these patterns cannot be adequately fit using a cubic lattice model; modeling their structures with the P4mm space group allows for a better fit to the patterns because the space group allows for c-axis atomic displacements that occur at the local scale. Furthermore, for the compositions 0.92BT-0.08BZT and 0.94BT-0.06BZT, strong tetragonal distortions are observed at the local scale and a less-distorted tetragonal structure is observed at longer length scales. In Rietveld refinements, the latter is modeled using a tetragonal phase. Since the peak overlap in these two-phase compositions limits the ability to model the local-scale structures as tetragonal, it is approximated in the refinements as a cubic phase. These results demonstrate that alloying BT with BZT results in increased disorder and disrupts the long-range ferroelectric symmetry present in BT, while the large tetragonal distortion present in BZT persists at the local scale.« less

Specific absorption rate and electric field measurements in the near field of six mobile phone base station antennas.

PubMed

Toivonen, Tommi; Toivo, Tim; Puranen, Lauri; Jokela, Kari

2009-05-01

In this article, the exposure to radio frequency electromagnetic fields was studied in close proximity (distances of 10, 100, 300, and 600 mm) to six base station antennas. The specific absorption rate (SAR) in 800 mm x 500 mm x 200 mm box phantom as well as unperturbed electric field (E) in air was measured. The results were used to determine whether the measurement of local maximum of unperturbed electric field can be used as a compliance check for local exposure. Also, the conservativeness of this assessment method compared to the ICNIRP basic restriction was studied. Moreover, the assessment of whole-body exposure was discussed and the distance ranges presented in which the ICNIRP limit for local exposure could be exceeded before the limit for whole-body SAR. These results show that the electric field measurement alone can be used for easy compliance check for the local exposure at all distances and for all antenna types studied. However, in some cases when the local peak value of E was compared directly to the ICNIRP reference level for unperturbed E, the exposure was overestimated only very slightly (by factor 1.1) compared to the basic restriction for localized SAR in a human, and hence these results can not be generalized to all antenna types. Moreover, it was shown that the limit for localized exposure could be exceeded before the limit for the whole-body average SAR, if the distance to the antenna was less than 240 mm. Copyright 2009 Wiley-Liss, Inc.

Impact of Concurrent Androgen Deprivation on Fiducial Marker Migration in External-beam Radiation Therapy for Prostate Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiberi, David A.; Carrier, Jean-Francois; Beauchemin, Marie-Claude

2012-09-01

Purpose: To determine the extent of gold fiducial marker (FM) migration in patients treated for prostate cancer with concurrent androgen deprivation and external-beam radiation therapy (EBRT). Methods and Materials: Three or 4 gold FMs were implanted in 37 patients with prostate adenocarcinoma receiving androgen deprivation therapy (ADT) in conjunction with 70-78 Gy. Androgen deprivation therapy was started a median of 3.9 months before EBRT (range, 0.3-12.5 months). To establish the extent of FM migration, the distance between each FM was calculated for 5-8 treatments once per week throughout the EBRT course. For each treatment, the distance between FMs was comparedmore » with the distance from the digitally reconstructed radiographs generated from the planning CT. A total of 281 treatments were analyzed. Results: The average daily migration was 0.8 {+-} 0.3 mm, with distances ranging from 0.2 mm-2.6 mm. Two of the 281 assessed treatments (0.7%) showed migrations >2 mm. No correlation between FM migration and patient weight or time delay between ADT and start of EBRT was found. There was no correlation between the extent of FM migration and prostate volume. Conclusion: This is the largest report of implanted FM migration in patients receiving concomitant ADT. Only 0.7% of the 281 treatments studied had significant marker migrations (>2 mm) throughout the course of EBRT. Consequently, the use of implanted FMs in these patients enables accurate monitoring of prostate gland position during treatment.« less

[What determines the market shares of the health funds in Israeli localities?].

PubMed

Shmueli, Amir; Engelcin-Nissan, Esti

2011-08-01

Four health funds operate nationally in Israel, but their local market shares vary dramatically across localities. To identify the main localities' characteristics which affect the size of the market shares of the various health funds. A total of 60 Localities with more than 20,000 inhabitants were chosen. The following Localities' characteristics were retrieved for the year 2004: the market shares of the four health funds, average income, standardized mortality ratio (SMR), periphery index, the age structure, the distance from the nearest general hospital, the share of Arab population, and size. Four market share equations were estimated using SURE (seemingly unrelated regressions estimation), allowing for inter-equation correlations. The results show that the market shares of the different health funds are affected by different factors. Clalit Health Services' (CHS) share increases with the distance from Tel Aviv and SMR, and decreases with the level of mean income and the distance from the nearest CHS hospital. Leumit's market share increases only with the distance from a CHS's hospital. The market share of Maccabi Healthcare Services is higher in central localities, Jewish localities, small cities and further away from a non-CHS hospital. Meuhedet's market share is higher in big cities, rich and healthy localities, and in Localities which are further away from CHS's hospitals. These findings indicate that the presence of the health funds in different Localities varies according to the Localities' characteristics. There appears to be a market segmentation and "specialization" of certain health funds in specific populations, and of the other health funds in the rest of the population.

Distance from the growth plate and Its relation to the outcome of unicameral bone cyst treatment.

PubMed

Haidar, Saadallah George; Culliford, David J; Gent, Edward David; Clarke, Nicholas M P

2011-04-01

Interventions to treat unicameral bone cysts vary. Nonetheless, regardless of the intervention modality, the outcome is not certain. The purpose of this study was to determine if the distance between the growth plate and the cyst can be used to predict the outcome of the treatment. Retrospectively, we assessed the outcome of 39 interventions in nineteen children that were performed between 1994 and 2003. Seventeen different modalities of treatment were employed. There were three female and sixteen male patients. The average age was 8 years. Nine cysts were in the greater trochanter area, three were in the femoral capital area and seven were in the proximal humerus. According to the cyst's distance from the growth plate, at the intervention time, there were 18 cases within less than 2 cm and 21 cases of more than 2 cm. Complete healing was achieved in 10 children (employing seven different modalities). In nine of them, the cysts were more than 2 cm away from the growth plate. In one child, the cyst was within less than 2 cm of the growth plate, however, treatment here involved epiphyseodesis. This study confirmed that, regardless of intervention modality, complete healing was not achievable in those cysts that are within less than 2 cm of an active growth plate. Complete healing was possible in those cysts that are more than 2 cm away from the growth plate. The 2-cm distance from the growth plate could be used as a predictor of treatment outcome of unicameral bone cysts.

The role of vision in academic school performance.

PubMed

Dirani, Mohamed; Zhang, Xiaoe; Goh, Liang Ke; Young, Terri L; Lee, Paul; Saw, Seang Mei

2010-01-01

To determine whether presenting distance visual acuity is related to subsequent academic school performance in Singaporean children between 9 to 10 years of age. Singapore children (n = 1143 children) were examined during their visits at ages 9 to 10 years (grades 3 to 4) as part of the Singapore Cohort Study of the Risk Factors for Myopia (SCORM) longitudinal study. Each child underwent an annual comprehensive eye examination, including the assessment of presenting logarithm of the minimum angle of resolution (LogMAR) distance visual acuity (VA). The individual marks of a nation-wide standard examination in grade 4 were used as the outcome measure for academic school performance. Children with any known eye disease, (such as media opacities) were excluded from the analysis. The mean presenting distance VA of the better eye was 0.10 and 0.08 when the children were in grades 3 and 4, respectively. There was a statistically significant difference for mean presenting VA with 9 and 10 year old boys scoring better (0.08 and 0.07) compared to girls (0.12 and 0.09) for the same ages, (p = 0.001 and p = 0.007), respectively. After adjusting for gender, ethnicity, school, reading, intelligence quotient and father's education, no significant relationships were found between average examination marks at the end of grade 4 and presenting VA obtained (better eye and worst eye) in grade 3 (p = 0.38 and p = 0.98) and 4 (p = 0.27 and p = 0.16). In our sample of Singaporean children without ocular disease, distance VA did not play a significant role in predicting academic school performance.

Eight Weeks of Strength and Power Training Improves Club Head Speed in Collegiate Golfers.

PubMed

Oranchuk, Dustin J; Mannerberg, Jason M; Robinson, Tracey L; Nelson, Megan C

2018-02-14

Club head speed (CHS) is a major determinant of drive distance, a key component of golf performance. The purpose of this study was to determine the indirect effects of an eight-week strength and power program on CHS. Twelve (6 male, 6 female) NCAA Division II golfers (20.3±1.5 years) randomly assigned to an intervention or control group, underwent either a periodized strength and power program consisting of high-load barbell movements or a bodyweight and rotational movement focused resistance training program. Outcomes were CHS, countermovement jump (CMJ) height, and 1RM back squat (BS), power clean (PC), and deadlift (DL). Dependent t-tests were utilized to assess differences in outcome variables pre-to-post for each group, independent t-tests were utilized to assess differences between groups, and Pearson correlations were utilized to assess associations between CHS and outcome variables. On average, the intervention group experienced improvements in all outcome variables except peak CHS (p=0.60); the control group displayed no changes in any outcome variable except a decrease in average CHS (p=0.028). Compared to the control group, the intervention group experienced greater improvements in average CHS, BS, PC, and average and peak CMJ height (p<0.05). Additionally, CHS had large associations with PC (r=0.70, p=0.012), BS (r=0.64, p=0.025), DL (r=0.54, p=0.068) and CMJ (r=0.73, p=0.007). These results suggest improving muscular strength and power by increasing PC, BS, and CMJ is associated with increased CHS in collegiate golfers. Integrating a high-load, barbell-focused strength and power program may be beneficial for improving CHS and indirectly, golf performance.

An Aggregated Method for Determining Railway Defects and Obstacle Parameters

NASA Astrophysics Data System (ADS)

Loktev, Daniil; Loktev, Alexey; Stepanov, Roman; Pevzner, Viktor; Alenov, Kanat

2018-03-01

The method of combining algorithms of image blur analysis and stereo vision to determine the distance to objects (including external defects of railway tracks) and the speed of moving objects-obstacles is proposed. To estimate the deviation of the distance depending on the blur a statistical approach, logarithmic, exponential and linear standard functions are used. The statistical approach includes a method of estimating least squares and the method of least modules. The accuracy of determining the distance to the object, its speed and direction of movement is obtained. The paper develops a method of determining distances to objects by analyzing a series of images and assessment of depth using defocusing using its aggregation with stereoscopic vision. This method is based on a physical effect of dependence on the determined distance to the object on the obtained image from the focal length or aperture of the lens. In the calculation of the blur spot diameter it is assumed that blur occurs at the point equally in all directions. According to the proposed approach, it is possible to determine the distance to the studied object and its blur by analyzing a series of images obtained using the video detector with different settings. The article proposes and scientifically substantiates new and improved existing methods for detecting the parameters of static and moving objects of control, and also compares the results of the use of various methods and the results of experiments. It is shown that the aggregate method gives the best approximation to the real distances.

Two-laser optical distance-measuring instrument that corrects for the atmospheric index of refraction.

NASA Technical Reports Server (NTRS)

Earnshaw, K. B.; Hernandez, E. N.

1972-01-01

The Wave Propagation Laboratory of the Environmental Research Laboratories of the National Oceanic and Atmospheric Administration has been engaged in the development of dual-wavelength, optical distance-measuring instruments. Recently a new generation of this type of high-accuracy instrument has been completed. Preliminary testing of the new instrument indicates that the original goal of the project, accuracy of better than one part in a million over distances of 5-10 km using averaging times of less than 1 min, is being met. This paper describes the instrument and preliminary test results.

THE ARAUCARIA PROJECT: ON THE TIP OF THE RED GIANT BRANCH DISTANCE DETERMINATION TO THE MAGELLANIC CLOUDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Górski, Marek; Gieren, Wolfgang; Catelan, Márcio

2016-06-01

We present a precise optical and near-infrared determination of the tip of the red giant branch (TRGB) brightness in the Large and Small Magellanic Clouds (respectively, LMC and SMC). The commonly used calibrations of the absolute magnitude of the TRGB lead to an overestimation of the distance to the LMC and SMC in the K band, and an underestimation of the distance in the optical I band for both galaxies. Reported discrepancies are at the level of 0.2 mag, with respect to the very accurate distance determinations to both MCs based on late-type eclipsing binaries. The differential distances between themore » LMC and SMC obtained in the J and K bands, and for the bolometric brightness are consistent with each other, and with the results obtained from eclipsing binaries and other distance indicators.« less

Propagation of a cosh-Gaussian beam through an optical system in turbulent atmosphere.

PubMed

Chu, Xiuxiang

2007-12-24

The propagation of a cosh-Gaussian beam through an arbitrary ABCD optical system in turbulent atmosphere has been investigated. The analytical expressions for the average intensity at any receiver plane are obtained. As an elementary example, the average intensity and its radius at the image plane of a cosh-Gaussian beam through a thin lens are studied. To show the effects of a lens on the average intensity and the intensity radius of the laser beam in turbulent atmosphere, the properties of a collimated cosh-Gaussian beam and a focused cosh-Gaussian beam for direct propagation in turbulent atmosphere are studied and numerically calculated. The average intensity profiles of a cosh-Gaussian beam through a lens can have a shape similar to that of the initial beam for a longer propagation distance than that of a collimated cosh-Gaussian beam for direct propagation. With the increment in the propagation distance, the average intensity radius at the image plane of a cosh-Gaussian beam through a thin lens will be smaller than that at the focal plane of a focused cosh-Gaussian beam for direct propagation. Meanwhile, the intensity distributions at the image plane of a cosh-Gaussian beam through a lens with different w(0) and Omega(0) are also studied.

Development of a model to determine oxygen consumption when crawling

PubMed Central

Pollard, J.P.; Heberger, J.R.; Dempsey, P.G.

2016-01-01

During a mine disaster or emergency, underground air can quickly become contaminated. In these circumstances, all underground mine workers are taught to don breathable air supply units at the first sign of an emergency. However, no contemporary oxygen consumption data is available for the purposes of designing breathing air supply equipment specifically for mine escape. Further, it would be useful to quantify the oxygen requirements of breathing air supply users for various escape scenarios. To address this need, 14 participants crawled a distance of 305 m each while their breath-by-breath oxygen consumption measurements were taken. Using these data, linear regression models were developed to determine peak and average oxygen consumption rates as well as total oxygen consumption. These models can be used by manufacturers of breathing air supply equipment to aid in the design of devices that would be capable of producing sufficient on-demand oxygen to allow miners to perform self-escape. PMID:26997858

Separation of the electromagnetic and the muon component in EAS by their arrival times

NASA Astrophysics Data System (ADS)

Brüggemann, M.; Apel, W.D.; Arteaga, J.C.; Badea, F.; Bekk, K.; Bertaina, M.; Blümer, J.; Bozdog, H.; Brancus, I.M.; Buchholz, P.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; Di Pierro, F.; Doll, P.; Engel, R.; Engler, J.; Finger, M.; Fuhrmann, D.; Ghia, P.L.; Gils, H.J.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J.R.; Huege, T.; Isar, P.G.; Kampert, K.-H.; Kickelbick, D.; Klages, H.O.; Kolotaev, Y.; Luczak, P.; Mathes, H.J.; Mayer, H.J.; Meurer, C.; Milke, J.; Mitrica, B.; Morales, A.; Morello, C.; Navarra, G.; Nehls, S.; Oehlschläger, J.; Ostapchenko, S.; Over, S.; Petcu, M.; Pierog, T.; Plewnia, S.; Rebel, H.; Roth, M.; Schieler, H.; Sima, O.; Stümpert, M.; Toma, G.; Trinchero, G.C.; Ulrich, H.; van Buren, J.; Walkowiak, W.; Weindl, A.; Wochele, J.; Zabierowski, J.

The KASCADE-Grande experiment at Forschungszentrum Karlsruhe, Germany, measures extensive air showers initiated by primary particles with energies between 100 TeV and 1 EeV. Detector pulses digitized by a Flash-ADC based data acquisition system were unfolded to study the arrival times of secondary particles separately for the electromagnetic and the muonic shower component. Muons arrive on average earlier at ground level than electrons. A cut on the particle arrival time has been determined as a function of the distance to the shower core for the separation of electrons and muons. This cut is intended to be used for the determination of the muon content of air showers in experiments without dedicated muon detectors but with time resolving detector electronics. The muon content is essential for the reconstruction of the cosmic ray energy spectrum separated into individual elemental groups.

A rough set approach for determining weights of decision makers in group decision making.

PubMed

Yang, Qiang; Du, Ping-An; Wang, Yong; Liang, Bin

2017-01-01

This study aims to present a novel approach for determining the weights of decision makers (DMs) based on rough group decision in multiple attribute group decision-making (MAGDM) problems. First, we construct a rough group decision matrix from all DMs' decision matrixes on the basis of rough set theory. After that, we derive a positive ideal solution (PIS) founded on the average matrix of rough group decision, and negative ideal solutions (NISs) founded on the lower and upper limit matrixes of rough group decision. Then, we obtain the weight of each group member and priority order of alternatives by using relative closeness method, which depends on the distances from each individual group member' decision to the PIS and NISs. Through comparisons with existing methods and an on-line business manager selection example, the proposed method show that it can provide more insights into the subjectivity and vagueness of DMs' evaluations and selections.

Beta-globin gene cluster haplotypes of Amerindian populations from the Brazilian Amazon region.

PubMed

Guerreiro, J F; Figueiredo, M S; Zago, M A

1994-01-01

We have determined the beta-globin cluster haplotypes for 80 Indians from four Brazilian Amazon tribes: Kayapó, Wayampí, Wayana-Apalaí, and Arára. The results are analyzed together with 20 Yanomámi previously studied. From 2 to 4 different haplotypes were identified for each tribe, and 7 of the possible 32 haplotypes were found in a sample of 172 chromosomes for which the beta haplotypes were directly determined or derived from family studies. The haplotype distribution does not differ significantly among the five populations. The two most common haplotypes in all tribes were haplotypes 2 and 6, with average frequencies of 0.843 and 0.122, respectively. The genetic affinities between Brazilian Indians and other human populations were evaluated by estimates of genetic distance based on haplotype data. The lowest values were observed in relation to Asians, especially Chinese, Polynesians, and Micronesians.

The importance of bulk density determination in gravity data processing for structure interpretation

NASA Astrophysics Data System (ADS)

Wildan, D.; Akbar, A. M.; Novranza, K. M. S.; Sobirin, R.; Permadi, A. N.; Supriyanto

2017-07-01

Gravity method use rock density variation for determining subsurface lithology and geological structure. In the "green area" where measurement of rock density has not been done, an attemp to find density is usually performed by calculating using Parasnis method, or by using using the average of rock density in the earth's crust (2,67 gr/cm3) or by using theoritical value of dominant rock density in the survey area (2,90 gr/cm3). Those three values of densities are applied to gravity data analysis in the hilly "X" area. And we have compared all together in order to observed which value has represented the structure better. The result showed that the higher value of rock density, the more obvious structure in the Bouguer anomaly profile. It is due to the contrast of maximum and minimum value of Bouguer anomaly that will affect the exageration in distance vs Bouguer anomaly graphic.

Observational calibration of the projection factor of Cepheids. IV. Period-projection factor relation of Galactic and Magellanic Cloud Cepheids

NASA Astrophysics Data System (ADS)

Gallenne, A.; Kervella, P.; Mérand, A.; Pietrzyński, G.; Gieren, W.; Nardetto, N.; Trahin, B.

2017-11-01

Context. The Baade-Wesselink (BW) method, which combines linear and angular diameter variations, is the most common method to determine the distances to pulsating stars. However, the projection factor, p-factor, used to convert radial velocities into pulsation velocities, is still poorly calibrated. This parameter is critical on the use of this technique, and often leads to 5-10% uncertainties on the derived distances. Aims: We focus on empirically measuring the p-factor of a homogeneous sample of 29 LMC and 10 SMC Cepheids for which an accurate average distances were estimated from eclipsing binary systems. Methods: We used the SPIPS algorithm, which is an implementation of the BW technique. Unlike other conventional methods, SPIPS combines all observables, i.e. radial velocities, multi-band photometry and interferometry into a consistent physical modelling to estimate the parameters of the stars. The large number and their redundancy insure its robustness and improves the statistical precision. Results: We successfully estimated the p-factor of several Magellanic Cloud Cepheids. Combined with our previous Galactic results, we find the following P-p relation: -0.08± 0.04(log P-1.18) + 1.24± 0.02. We find no evidence of a metallicity dependent p-factor. We also derive a new calibration of the period-radius relation, log R = 0.684± 0.007(log P-0.517) + 1.489± 0.002, with an intrinsic dispersion of 0.020. We detect an infrared excess for all stars at 3.6 μm and 4.5 μm, which might be the signature of circumstellar dust. We measure a mean offset of Δm3.6 = 0.057 ± 0.006 mag and Δm4.5 = 0.065 ± 0.008 mag. Conclusions: We provide a new P-p relation based on a multi-wavelength fit that can be used for the distance scale calibration from the BW method. The dispersion is due to the LMC and SMC width we took into account because individual Cepheids distances are unknown. The new P-R relation has a small intrinsic dispersion: 4.5% in radius. This precision will allow us to accurately apply the BW method to nearby galaxies. Finally, the infrared excesses we detect again raise the issue of using mid-IR wavelengths to derive period-luminosity relation and to calibrate the Hubble constant. These IR excesses might be the signature of circumstellar dust, and are never taken into account when applying the BW method at those wavelengths. Our measured offsets may give an average bias of 2.8% on the distances derived through mid-IR P-L relations.

Quiet-time magnetospheric field depression at 2.3 to 3.6 R sub E

NASA Technical Reports Server (NTRS)

Sugiura, M.

1972-01-01

Fluxgate magnetometer data obtained by OGO-5 near perigee were used to establish the existence of large field depressions in the magnetosphere under conditions of varying degree of disturbance at distances ranging from 2.3 to 3.6 R sub E at all local times. The results also provide the average delta B at these distances when Dst, as being derived at present, is zero.

Cycle-time equation for the Koller K300 cable yarder operating on steep slopes in the Northeast

Treesearch

Neil K. Huyler; Chris B. LeDoux

1997-01-01

Describes a delay-free-cycle time equation for the Koller K300 skyline yarder operating on steep slopes in the Northeast. Using the equation, the average delay-free-cycle time was 5.72 minutes. This means that about 420 cubic feet of material per hour can be produced. The important variables used in the equation were slope yarding distance, lateral yarding distance,...

Guiding of Plasmons and Phonons in Complex Three Dimensional Structures

DTIC Science & Technology

2013-01-01

typical sample. We employed X - ray diffraction (XRD) to measure the average grain size across the entire depth of the sample over spot sizes Figure...propagation distance L as the 1/e decay length of the field intensity along x ...as well as the network layout with subwavelegth gap size and internode distance on the order of the effective wavelength, a small 2 x 2 resonant

Time-motion analysis of goalball players in attacks: differences of the player positions and the throwing techniques.

PubMed

Monezi, Lucas Antônio; Magalhães, Thiago Pinguelli; Morato, Márcio Pereira; Mercadante, Luciano Allegretti; Furtado, Otávio Luis Piva da Cunha; Misuta, Milton Shoiti

2018-03-26

In this study, we aimed to analyse goalball players time-motion variables (distance covered, time spent, maximum and average velocities) in official goalball match attacks, taking into account the attack phases (preparation and throwing), player position (centres and wings) and throwing techniques (frontal, spin and between the legs). A total of 365 attacks were assessed using a video based method (2D) through manual tracking using the Dvideo system. Inferential non-parametric statistics were applied for comparison of preparation vs. throwing phase, wings vs. centres and, among the throwing techniques, frontal, spin and between the legs. Significant differences were found between the attack preparation versus the throwing phase for all player time-motion variables: distance covered, time spent, maximum player velocity and average player velocity. Wing players performed most of the throws (85%) and covered longer distances than centres (1.65 vs 0.31 m). The between the legs and the spin throwing techniques presented greater values for most of the time-motion variables (distance covered, time spent and maximum player velocity) than did the frontal technique in both attack phases. These findings provide important information regarding players' movement patterns during goalball matches that can be used to plan more effective training.

Corrected Integral Shape Averaging Applied to Obstructive Sleep Apnea Detection from the Electrocardiogram

NASA Astrophysics Data System (ADS)

Boudaoud, S.; Rix, H.; Meste, O.; Heneghan, C.; O'Brien, C.

2007-12-01

We present a technique called corrected integral shape averaging (CISA) for quantifying shape and shape differences in a set of signals. CISA can be used to account for signal differences which are purely due to affine time warping (jitter and dilation/compression), and hence provide access to intrinsic shape fluctuations. CISA can also be used to define a distance between shapes which has useful mathematical properties; a mean shape signal for a set of signals can be defined, which minimizes the sum of squared shape distances of the set from the mean. The CISA procedure also allows joint estimation of the affine time parameters. Numerical simulations are presented to support the algorithm for obtaining the CISA mean and parameters. Since CISA provides a well-defined shape distance, it can be used in shape clustering applications based on distance measures such as[InlineEquation not available: see fulltext.]-means. We present an application in which CISA shape clustering is applied to P-waves extracted from the electrocardiogram of subjects suffering from sleep apnea. The resulting shape clustering distinguishes ECG segments recorded during apnea from those recorded during normal breathing with a sensitivity of[InlineEquation not available: see fulltext.] and specificity of[InlineEquation not available: see fulltext.].

Maximizing coupling strength of magnetically anchored surgical instruments: how thick can we go?

PubMed

Best, Sara L; Bergs, Richard; Gedeon, Makram; Paramo, Juan; Fernandez, Raul; Cadeddu, Jeffrey A; Scott, Daniel J

2011-01-01

The Magnetic Anchoring and Guidance System (MAGS) includes an external magnet that controls intra-abdominal surgical instruments via magnetic attraction forces. We have performed NOTES (Natural Orifice Transluminal Endoscopic Surgery) and LESS (Laparoendoscopic Single Site) procedures using MAGS instruments in porcine models with up to 2.5-cm-thick abdominal walls, but this distance may not be sufficient in some humans. The purpose of this study was to determine the maximal abdominal wall thickness for which the current MAGS platform is suitable. Successive iterations of prototype instruments were developed; those evaluated in this study include external (134-583 g, 38-61 mm diameter) and internal (8-39 g, 10-22 mm diameter) components using various grades, diameters, thicknesses, and stacking/shielding/focusing configurations of permanent Neodymium-iron-boron (NdFeB) magnets. Nine configurations were tested for coupling strength across distances of 0.1-10 cm. The force-distance tests across an air medium were conducted at 0.5-mm increments using a robotic arm fitted with a force sensor. A minimum theoretical instrument drop-off (decoupling) threshold was defined as the separation distance at which force decreased below the weight of the heaviest internal component (39 g). Magnetic attraction forces decreased exponentially over distance. For the nine configurations tested, the average forces were 3,334 ± 1,239 gf at 0.1 cm, 158 ± 98 gf at 2.5 cm, and 8.7 ± 12 gf at 5 cm; the drop-off threshold was 3.64 ± 0.8 cm. The larger stacking configurations and magnets yielded up to a 592% increase in attraction force at 2.5 cm and extended the drop-off threshold distance by up to 107% over single-stack anchors. For the strongest configuration, coupling force ranged from 5,337 gf at 0.1 cm to 0 gf at 6.95 cm and yielded a drop-off threshold distance of 4.78 cm. This study suggests that the strongest configuration of currently available MAGS instruments is suitable for clinically relevant abdominal wall thicknesses. Further platform development and optimization are warranted.

Establishing an efficient way to utilize the drought resistance germplasm population in wheat.

PubMed

Wang, Jiancheng; Guan, Yajing; Wang, Yang; Zhu, Liwei; Wang, Qitian; Hu, Qijuan; Hu, Jin

2013-01-01

Drought resistance breeding provides a hopeful way to improve yield and quality of wheat in arid and semiarid regions. Constructing core collection is an efficient way to evaluate and utilize drought-resistant germplasm resources in wheat. In the present research, 1,683 wheat varieties were divided into five germplasm groups (high resistant, HR; resistant, R; moderate resistant, MR; susceptible, S; and high susceptible, HS). The least distance stepwise sampling (LDSS) method was adopted to select core accessions. Six commonly used genetic distances (Euclidean distance, Euclid; Standardized Euclidean distance, Seuclid; Mahalanobis distance, Mahal; Manhattan distance, Manhat; Cosine distance, Cosine; and Correlation distance, Correlation) were used to assess genetic distances among accessions. Unweighted pair-group average (UPGMA) method was used to perform hierarchical cluster analysis. Coincidence rate of range (CR) and variable rate of coefficient of variation (VR) were adopted to evaluate the representativeness of the core collection. A method for selecting the ideal constructing strategy was suggested in the present research. A wheat core collection for the drought resistance breeding programs was constructed by the strategy selected in the present research. The principal component analysis showed that the genetic diversity was well preserved in that core collection.

Estimation of spatial patterns of urban air pollution over a 4-week period from repeated 5-min measurements

NASA Astrophysics Data System (ADS)

Gillespie, Jonathan; Masey, Nicola; Heal, Mathew R.; Hamilton, Scott; Beverland, Iain J.

2017-02-01

Determination of intra-urban spatial variations in air pollutant concentrations for exposure assessment requires substantial time and monitoring equipment. The objective of this study was to establish if short-duration measurements of air pollutants can be used to estimate longer-term pollutant concentrations. We compared 5-min measurements of black carbon (BC) and particle number (PN) concentrations made once per week on 5 occasions, with 4 consecutive 1-week average nitrogen dioxide (NO2) concentrations at 18 locations at a range of distances from busy roads in Glasgow, UK. 5-min BC and PN measurements (averaged over the two 5-min periods at the start and end of a week) explained 40-80%, and 7-64% respectively, of spatial variation in the intervening 1-week NO2 concentrations for individual weeks. Adjustment for variations in background concentrations increased the percentage of explained variation in the bivariate relationship between the full set of NO2 and BC measurements over the 4-week period from 28% to 50% prior to averaging of repeat measurements. The averages of five 5-min BC and PN measurements made over 5 weeks explained 75% and 33% respectively of the variation in average 1-week NO2 concentrations over the same period. The relatively high explained variation observed between BC and NO2 measured on different time scales suggests that, with appropriate steps to correct or average out temporal variations, repeated short-term measurements can be used to provide useful information on longer-term spatial patterns for these traffic-related pollutants.

Magnetic field directional discontinuities - Characteristics between 0.46 and 1.0 AU

NASA Technical Reports Server (NTRS)

Lepping, R. P.; Behannon, K. W.

1986-01-01

Based on Mariner 10 data, a statistical survey and an application of the Sonnerup-Cahill variance procedure to a visual identification with 1.2-s averages for time intervals corresponding to the equally spaced heliocentric distances of 1.0, 0.72 and 0.46 AU, are employed to study the characteristics of directional discontinuities (DDs) in the interplanetary magnetic field. Analysis using two methods demonstrated that the ratio of tangential discontinuities (TDs) to rotational discontinuities (RDs) decreased with decreasing radial distance. Decreases in average discontinuity thickness of 41 percent between 1.0 and 0.72 AU, and 56 percent between 1.0 and 0.46 AU, were found for both TDs and RDs, in agreement with Pioneer 10 data between 1 and 5 AU. Normalization of the individual DD thicknesses with respect to the estimated local proton gyroradius (R sub L) gave a nearly constant average thickness at the three locations, 36 + or - 5 R sub L, for both RDs and TDs.

Quantifying exciton hopping in disordered media with quenching sites: Application to arrays of quantum dots

NASA Astrophysics Data System (ADS)

Miyazaki, Jun

2013-10-01

We present an analytical method for quantifying exciton hopping in an energetically disordered system with quenching sites. The method is subsequently used to provide a quantitative understanding of exciton hopping in a quantum dot (QD) array. Several statistical quantities that characterize the dynamics (survival probability, average number of distinct sites visited, average hopping distance, and average hopping rate in the initial stage) are obtained experimentally by measuring time-resolved fluorescence intensities at various temperatures. The time evolution of these quantities suggests in a quantitative way that at low temperature an exciton tends to be trapped at a local low-energy site, while at room temperature, exciton hopping occurs repeatedly, leading to a large hopping distance. This method will serve to facilitate highly efficient optoelectronic devices using QDs such as photovoltaic cells and light-emitting diodes, since exciton hopping is considered to strongly influence their operational parameters. The presence of a dark QD (quenching site) that exhibits fast decay is also quantified.

Solar wind velocity and temperature in the outer heliosphere

NASA Technical Reports Server (NTRS)

Gazis, P. R.; Barnes, A.; Mihalov, J. D.; Lazarus, A. J.

1994-01-01

At the end of 1992, the Pioneer 10, Pioneer 11, and Voyager 2 spacecraft were at heliocentric distances of 56.0, 37.3, and 39.0 AU and heliographic latitudes of 3.3 deg N, 17.4 deg N, and 8.6 deg S, respectively. Pioneer 11 and Voyager 2 are at similar celestial longitudes, while Pioneer 10 is on the opposite side of the Sun. All three spacecraft have working plasma analyzers, so intercomparison of data from these spacecraft provides important information about the global character of the solar wind in the outer heliosphere. The averaged solar wind speed continued to exhibit its well-known variation with solar cycle: Even at heliocentric distances greater than 50 AU, the average speed is highest during the declining phase of the solar cycle and lowest near solar minimum. There was a strong latitudinal gradient in solar wind speed between 3 deg and 17 deg N during the last solar minimum, but this gradient has since disappeared. The solar wind temperature declined with increasing heliocentric distance out to a heliocentric distance of at least 20 AU; this decline appeared to continue at larger heliocentric distances, but temperatures in the outer heliosphere were suprisingly high. While Pioneer 10 and Voyager 2 observed comparable solar wind temperatures, the temperature at Pioneer 11 was significantly higher, which suggests the existence of a large-scale variation of temperature with heliographic longitude. There was also some suggestion that solar wind temperatures were higher near solar minimum.

Evening flights of female northern pintails from a major roost site

USGS Publications Warehouse

Cox, R.R.; Afton, A.D.

1996-01-01

We monitored evening flights of female Northern Pintails (Anas acuta) from Lacassine National Wildlife Refuge (NWR) in southwestern Louisiana during winters of 1991-1992 and 1992-1993. We analyzed the influence of female age, winter, and date within wintering period on three flight parameters: distance, duration, and departure time. Flight distance and duration increased with date within wintering period, and age differences in flight distance and duration were not consistent between winters. Females departed 12 min later, on average, on clear, moonlit evenings than on overcast, moonless evenings, and 4 min later when winds were light rather than heavy. After controlling for variation due to environmental conditions, immature females departed Lacassine NWR 1.3 min earlier, on average, than did adults. Flight parameters of females did not differ between hunting and non-hunting time periods. Estimated daily transit costs ranged from 27-54% of basal metabolic rate, 7-19% of daily energy expenditure, and 8-20% of daily dietary intake of rice (Oryza sativa). Our findings that flight distance and duration increased with date within wintering period were consistent with predictions of refuging theory, but alternative hypotheses also could explain these results. Evening flights of Northern Pintails roosting on Lacassine NWR were greater in distance and duration than those reported for most other species of wintering waterfowl. We recommend that proximity of refuges to feeding sites be considered in conservation and management plans for wintering Northern Pintails and other refuging waterfowl.

Distance Determination by Gated Viewing Systems Taking into Account the Illuminating Pulse Shape

NASA Astrophysics Data System (ADS)

Gorobets, V. A.; Kuntsevich, B. F.; Shabrov, D. V.

2017-11-01

For gated viewing systems with triangular and trapezoidal illuminating pulses, we have obtained the range-intensity profiles (RIPs) of the signal as the time delay was varied between the leading edges of the gate pulse and the illuminating pulse. We have established that if the duration of the illuminating pulse Δtlas is less than or equal to the duration of the gate pulse ΔtIC, then the expressions for the characteristic distances are the same as for rectangular pulses and they can be used to determine the distance to objects. When Δtlas > ΔtIC, in the case of triangular illuminating pulses the RIP is bell-shaped. For trapezoidal pulses, the RIP is bell-shaped with or without a plateau section. We propose an empirical method for determining the characteristic distances to the RIP maximum and the boundary points for the plateau section, which we then use to calculate the distance to the object. Using calibration constants, we propose a method for determining the distance to an object and we have experimentally confirmed the feasibility of this method.

Genetic diversity and structure of the threatened species Sinopodophyllum hexandrum (Royle) Ying.

PubMed

Liu, W; Wang, J; Yin, D X; Yang, M; Wang, P; Han, Q S; Ma, Q Q; Liu, J J; Wang, J X

2016-06-10

Sinopodophyllum hexandrum is an important medicinal plant that has been listed as an endangered species, making the conservation of its genetic diversity a priority. Therefore, the genetic diversity and population structure of S. hexandrum was investigated through inter-simple sequence repeat analysis of eight natural populations. Eleven selected primers generated 141 discernible fragments. The percentage of polymorphic bands was 37.59% at the species level, and 7.66-24.32% at the population level. Genetic diversity of S. hexandrum was low within populations (average HE = 0.0366), but higher at the species level (HE = 0.0963). Clear structure and high genetic differentiation were detected between populations using unweighted pair groups mean arithmetic and principle coordinate analysis. Clustering approaches clustered the eight sampled populations into three major groups, and AMOVA confirmed there to be significant variation between populations (63.27%). Genetic differentiation may have arisen through limited gene flow (Nm = 0.3317) in this species. Isolation by distance among populations was determined by comparing genetic distance versus geographical distance using the Mantel test. The results revealed no correlation between spatial pattern and geographic location. Given the low within-population genetic diversity, high differentiation among populations, and the increasing anthropogenic pressure on this species, in situ conservation measures, in addition to sampling and ex situ preservation, are recommended to preserve S. hexandrum populations and to retain their genetic diversity.

A Three-Year Study of the Impact of Instructor Attitude, Enthusiasm, and Teaching Style on Student Learning in a Medicinal Chemistry Course

PubMed Central

Qi, Yongyue

2014-01-01

Objective. To determine the effect of instructor attitude, enthusiasm, and teaching style on learning for distance and campus pharmacy students. Methods. Over a 3-year period, distance and campus students enrolled in the spring semester of a medicinal chemistry course were asked to complete a survey instrument with questions related to instructor attitude, enthusiasm, and teaching style, as well as items to measure student intrinsic motivation and vitality. Results. More positive responses were observed among distance students and older students. Gender did not impact student perspectives on 25 of the 26 survey questions. Student-related items were significantly correlated with instructor-related items. Also, student-related items and second-year cumulative grade point average were predictive of students’ final course grades. Instructor enthusiasm demonstrated the highest correlation with student intrinsic motivation and vitality. Conclusion. While this study addresses the importance of content mastery and instructional methodologies, it focuses on issues related to instructor attitude, instructor enthusiasm, and teaching style, which all play a critical role in the learning process. Thus, instructors have a responsibility to evaluate, reevaluate, and analyze the above factors to address any related issues that impact the learning process, including their influence on professional students’ intrinsic motivation and vitality, and ability to meet educational outcomes. PMID:25258437

Does hyperthermia constrain flight duration in a short-distance migrant?

PubMed Central

Guillemette, Magella; Larochelle, Jacques; Polymeropoulos, Elias T.; Granbois, Jean-Marc; Butler, Patrick J.; Pelletier, David; Frappell, Peter B.; Portugal, Steven J.

2016-01-01

While some migratory birds perform non-stop flights of over 11 000 km, many species only spend around 15% of the day in flight during migration, posing a question as to why flight times for many species are so short. Here, we test the idea that hyperthermia might constrain flight duration (FD) in a short-distance migrant using remote biologging technology to measure heart rate, hydrostatic pressure and body temperature in 19 migrating eider ducks (Somateria mollissima), a short-distance migrant. Our results reveal a stop-and-go migration strategy where migratory flights were frequent (14 flights day−1) and short (15.7 min), together with the fact that body temperature increases by 1°C, on average, during such flights, which equates to a rate of heat storage index (HSI) of 4°C h−1. Furthermore, we could not find any evidence that short flights were limited by heart rate, together with the fact that the numerous stops could not be explained by the need to feed, as the frequency of dives and the time spent feeding were comparatively small during the migratory period. We thus conclude that hyperthermia appears to be the predominant determinant of the observed migration strategy, and suggest that such a physiological limitation to FD may also occur in other species. This article is part of the themed issue ‘Moving in a moving medium: new perspectives on flight’. PMID:27528776

Global Positioning System Use in the Community to Evaluate Improvements in Walking After Revascularization

PubMed Central

Gernigon, Marie; Le Faucheur, Alexis; Fradin, Dominique; Noury-Desvaux, Bénédicte; Landron, Cédric; Mahe, Guillaume; Abraham, Pierre

2015-01-01

Abstract Revascularization aims at improving walking ability in patients with arterial claudication. The highest measured distance between 2 stops (highest-MDCW), the average walking speed (average-WSCW), and the average stop duration (average-DSCW) can be measured by global positioning system, but their evolution after revascularization is unknown. We included 251 peripheral artery diseased patients with self-reported limiting claudication. The patients performed a 1-hour stroll, recorded by a global positioning system receiver. Patients (n = 172) with confirmed limitation (highest-MDCW <2000m) at inclusion were reevaluated after 6 months. Patients revascularized during the follow-up period were compared with reference patients (ie, with unchanged lifestyle medical or surgical status). Other patients (lost to follow-up or treatment change) were excluded (n = 89). We studied 44 revascularized and 39 reference patients. Changes in highest-MDCW (+442 vs. +13 m) and average-WSCW (+0.3 vs. −0.2 km h−1) were greater in revascularized than in reference patients (both P < 0.01). In contrast, no significant difference in average-DSCW changes was found between the groups. Among the revascularized patients, 13 (29.5%) had a change in average-WSCW, but not in highest-MDCW, greater than the mean + 1 standard deviation of the change observed for reference patients. Revascularization may improve highest-MDCW and/or average-WSCW. This first report of changes in community walking ability in revascularized patients suggests that, beyond measuring walking distances, average-WSCW measurement is essential to monitor these changes. Applicability to other surgical populations remains to be evaluated. Registration: http://www.clinicaltrials.gov/ct2/show/NCT01141361 PMID:25950694

Global positioning system use in the community to evaluate improvements in walking after revascularization: a prospective multicenter study with 6-month follow-up in patients with peripheral arterial disease.

PubMed

Gernigon, Marie; Le Faucheur, Alexis; Fradin, Dominique; Noury-Desvaux, Bénédicte; Landron, Cédric; Mahe, Guillaume; Abraham, Pierre

2015-05-01

Revascularization aims at improving walking ability in patients with arterial claudication. The highest measured distance between 2 stops (highest-MDCW), the average walking speed (average-WSCW), and the average stop duration (average-DSCW) can be measured by global positioning system, but their evolution after revascularization is unknown.We included 251 peripheral artery diseased patients with self-reported limiting claudication. The patients performed a 1-hour stroll, recorded by a global positioning system receiver. Patients (n = 172) with confirmed limitation (highest-MDCW <2000m) at inclusion were reevaluated after 6 months. Patients revascularized during the follow-up period were compared with reference patients (ie, with unchanged lifestyle medical or surgical status). Other patients (lost to follow-up or treatment change) were excluded (n = 89).We studied 44 revascularized and 39 reference patients. Changes in highest-MDCW (+442 vs. +13 m) and average-WSCW (+0.3 vs. -0.2 km h) were greater in revascularized than in reference patients (both P < 0.01). In contrast, no significant difference in average-DSCW changes was found between the groups. Among the revascularized patients, 13 (29.5%) had a change in average-WSCW, but not in highest-MDCW, greater than the mean + 1 standard deviation of the change observed for reference patients.Revascularization may improve highest-MDCW and/or average-WSCW. This first report of changes in community walking ability in revascularized patients suggests that, beyond measuring walking distances, average-WSCW measurement is essential to monitor these changes. Applicability to other surgical populations remains to be evaluated. http://www.clinicaltrials.gov/ct2/show/NCT01141361.

Metabolic power and energetic costs of professional Australian Football match-play.

PubMed

Coutts, Aaron J; Kempton, Thomas; Sullivan, Courtney; Bilsborough, Johann; Cordy, Justin; Rampinini, Ermanno

2015-03-01

To compare the metabolic power demands between positional groups, and examine temporal changes in these parameters during Australian Football match-play. Longitudinal observational study. Global positioning system data were collected from 39 Australian Football players from the same club during 19 Australian Football League competition games over two seasons. A total of 342 complete match samples were obtained for analysis. Players were categorised into one of six positional groups: tall backs, mobile backs, midfielders, tall forwards, mobile forwards and rucks. Instantaneous raw velocity data obtained from the global positioning system units was exported to a customised spreadsheet which provided estimations of both speed-based (e.g. total and high-speed running distance) and derived metabolic power and energy expenditure variables (e.g. average metabolic power, high-power distance, total energy expenditure). There were significant differences between positional groups for both speed-based and metabolic power indices, with midfielders covering more total and high-speed distance, as well as greater average and overall energy expenditure compared to other positions (all p<0.001). There were reductions in total, high-speed, and high-power distance, as well as average metabolic power throughout the match (all p<0.001). Positional differences exist for both metabolic power and traditional running based variables. Generally, midfielders, followed by mobile forwards and mobile backs had greater activity profiles compared to other position groups. We observed that the reductions in most metabolic power variables during the course of the match are comparable to traditional running based metrics. This study demonstrates that metabolic power data may contribute to our understanding of the physical demands of Australian Football. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Match-play activity profile in professional soccer players during official games and the relationship between external and internal load.

PubMed

Suarez-Arrones, L; Torreño, N; Requena, B; Sáez De Villarreal, E; Casamichana, D; Barbero-Alvarez, J C; Munguía-Izquierdo, D

2015-12-01

The aim was to quantify for the first time the physical and physiological profile of professional soccer players in official games using GPS and heart rate (HR) response. Thirty professional soccer players were investigated during a half in competitive club level matches (N.=348) using GPS devices. The relative total distance was 118.9±10.7 m∙min(-1) and player's Work-To-Rest Ratio was 2.1:1. Defenders covered the lowest total distance, while Second-Strikers (2(nd)S) and Wide-Midfielders (W-MD) traveled the greatest total distance. Defenders presented the lowest Work-To-Rest Ratio values. Playing position also impacted on all sprinting performance results, except in average sprint distance and time of sprint. The number of sprints and repeated-sprint sequences recorded by the W-MD and Strikers (S) were significantly greater than any other group. The average HR recorded was 87.1%HRmax and the relationship between the external and internal load value (Effindex) was 1.4 with significant differences in both between playing positions. W-MD recorded a significantly smaller average HR than any other group and Centre-Backs showed a significantly smaller Effindex value than any other group. Conversely, W-MD showed a significantly greater Effindex value than any other group, except the 2(nd)S. This study has verified a number of statistically significant differences between the different playing positions. Coaches should be focused on the specific physical and physiological requirements of the playing positions to optimize the training prescription in soccer. The relationships between external and internal load measures among position-specific indicates that players with less overall running performance during match-play were the worst in Effindex.

Determination of Tissue Thermal Conductivity by Measuring and Modeling Temperature Rise Induced in Tissue by Pulsed Focused Ultrasound

PubMed Central

Kujawska, Tamara; Secomski, Wojciech; Kruglenko, Eleonora; Krawczyk, Kazimierz; Nowicki, Andrzej

2014-01-01

A tissue thermal conductivity (Ks) is an important parameter which knowledge is essential whenever thermal fields induced in selected organs are predicted. The main objective of this study was to develop an alternative ultrasonic method for determining Ks of tissues in vitro suitable for living tissues. First, the method involves measuring of temperature-time T(t) rises induced in a tested tissue sample by a pulsed focused ultrasound with measured acoustic properties using thermocouples located on the acoustic beam axis. Measurements were performed for 20-cycle tone bursts with a 2 MHz frequency, 0.2 duty-cycle and 3 different initial pressures corresponding to average acoustic powers equal to 0.7 W, 1.4 W and 2.1 W generated from a circular focused transducer with a diameter of 15 mm and f-number of 1.7 in a two-layer system of media: water/beef liver. Measurement results allowed to determine position of maximum heating located inside the beef liver. It was found that this position is at the same axial distance from the source as the maximum peak-peak pressure calculated for each nonlinear beam produced in the two-layer system of media. Then, the method involves modeling of T(t) at the point of maximum heating and fitting it to the experimental data by adjusting Ks. The averaged value of Ks determined by the proposed method was found to be 0.5±0.02 W/(m·°C) being in good agreement with values determined by other methods. The proposed method is suitable for determining Ks of some animal tissues in vivo (for example a rat liver). PMID:24743838

On the construction of a time base and the elimination of averaging errors in proxy records

NASA Astrophysics Data System (ADS)

Beelaerts, V.; De Ridder, F.; Bauwens, M.; Schmitz, N.; Pintelon, R.

2009-04-01

Proxies are sources of climate information which are stored in natural archives (e.g. ice-cores, sediment layers on ocean floors and animals with calcareous marine skeletons). Measuring these proxies produces very short records and mostly involves sampling solid substrates, which is subject to the following two problems: Problem 1: Natural archives are equidistantly sampled at a distance grid along their accretion axis. Starting from these distance series, a time series needs to be constructed, as comparison of different data records is only meaningful on a time grid. The time series will be non-equidistant, as the accretion rate is non-constant. Problem 2: A typical example of sampling solid substrates is drilling. Because of the dimensions of the drill, the holes drilled will not be infinitesimally small. Consequently, samples are not taken at a point in distance, but rather over a volume in distance. This holds for most sampling methods in solid substrates. As a consequence, when the continuous proxy signal is sampled, it will be averaged over the volume of the sample, resulting in an underestimation of the amplitude. Whether this averaging effect is significant, depends on the volume of the sample and the variations of interest of the proxy signal. Starting from the measured signal, the continuous signal needs to be reconstructed in order eliminate these averaging errors. The aim is to provide an efficient identification algorithm to identify the non-linearities in the distance-time relationship, called time base distortions, and to correct for the averaging effects. Because this is a parametric method, an assumption about the proxy signal needs to be made: the proxy record on a time base is assumed to be harmonic, this is an obvious assumption because natural archives often exhibit a seasonal cycle. In a first approach the averaging effects are assumed to be in one direction only, i.e. the direction of the axis on which the measurements were performed. The measured averaged proxy signal is modeled by following signal model: -- Δ ∫ n+12Δδ- y(n,θ) = δ- 1Δ- y(m,θ)dm n-2 δ where m is the position, x(m) = Δm; θ are the unknown parameters and y(m,θ) is the proxy signal we want to identify (the proxy signal as found in the natural archive), which we model as: y(m, θ) = A +∑H [A sin(kωt(m ))+ A cos(kωt(m ))] 0 k=1 k k+H With t(m): t(m) = mTS + g(m )TS Here TS = 1/fS is the sampling period, fS the sampling frequency, and g(m) the unknown time base distortion (TBD). In this work a splines approximation of the TBD is chosen: ∑ g(m ) = b blφl(m ) l=1 where, b is a vector of unknown time base distortion parameters, and φ is a set of splines. The estimates of the unknown parameters were obtained with a nonlinear least squares algorithm. The vessel density measured in the mangrove tree R mucronata was used to illustrate the method. The vessel density is a proxy for the rain fall in tropical regions. The proxy data on the newly constructed time base showed a yearly periodicity, this is what we expected and the correction for the averaging effect increased the amplitude by 11.18%.

Time Variation of the Distance Separating Bomb and Dive Bomber Subsequent to Bomb Release

NASA Technical Reports Server (NTRS)

Mathews, Charles W.

1952-01-01

A study has been made of the variation of the distance separating bomb and aircraft with time after release as applied to dive-bombing operations, Separation distances determined from this study are presented in terms of two variables only, dive angle and maximum airplane accelerometer reading; the values of separation distance include the effects of delay in initiation of the pull-out and lag in attainment of the maximum normal acceleration.Contains analysis and calculations of the separation distances between bomb and dive bomber following bomb release, Separation distances as determined by the dive angle and the maximum airplane accelerometer reading are presented in a single chart.

Automated scoring of regional lung perfusion in children from contrast enhanced 3D MRI

NASA Astrophysics Data System (ADS)

Heimann, Tobias; Eichinger, Monika; Bauman, Grzegorz; Bischoff, Arved; Puderbach, Michael; Meinzer, Hans-Peter

2012-03-01

MRI perfusion images give information about regional lung function and can be used to detect pulmonary pathologies in cystic fibrosis (CF) children. However, manual assessment of the percentage of pathologic tissue in defined lung subvolumes features large inter- and intra-observer variation, making it difficult to determine disease progression consistently. We present an automated method to calculate a regional score for this purpose. First, lungs are located based on thresholding and morphological operations. Second, statistical shape models of left and right children's lungs are initialized at the determined locations and used to precisely segment morphological images. Segmentation results are transferred to perfusion maps and employed as masks to calculate perfusion statistics. An automated threshold to determine pathologic tissue is calculated and used to determine accurate regional scores. We evaluated the method on 10 MRI images and achieved an average surface distance of less than 1.5 mm compared to manual reference segmentations. Pathologic tissue was detected correctly in 9 cases. The approach seems suitable for detecting early signs of CF and monitoring response to therapy.

Optimizing deep hyperthermia treatments: are locations of patient pain complaints correlated with modelled SAR peak locations?

NASA Astrophysics Data System (ADS)

Canters, R. A. M.; Franckena, M.; van der Zee, J.; van Rhoon, G. C.

2011-01-01

During deep hyperthermia treatment, patient pain complaints due to heating are common when maximizing power. Hence, there exists a good rationale to investigate whether the locations of predicted SAR peaks by hyperthermia treatment planning (HTP) are correlated with the locations of patient pain during treatment. A retrospective analysis was performed, using the treatment reports of 35 patients treated with deep hyperthermia controlled by extensive treatment planning. For various SAR indicators, the average distance from a SAR peak to a patient discomfort location was calculated, for each complaint. The investigated V0.1 closest (i.e. the part of the 0.1th SAR percentile closest to the patient complaint) performed the best, and leads to an average distance between the SAR peak and the complaint location of 3.9 cm. Other SAR indicators produced average distances that were all above 10 cm. Further, the predicted SAR peak location with V0.1 provides a 77% match with the region of complaint. The current study demonstrates that HTP is able to provide a global indication of the regions where hotspots during treatment will most likely occur. Further development of this technology is necessary in order to use HTP as a valuable toll for objective and advanced SAR steering. The latter is especially valid for applications that enable 3D SAR steering.

Extraction of liver volumetry based on blood vessel from the portal phase CT dataset

NASA Astrophysics Data System (ADS)

Maklad, Ahmed S.; Matsuhiro, Mikio; Suzuki, Hidenobu; Kawata, Yoshiki; Niki, Noboru; Utsunomiya, Tohru; Shimada, Mitsuo

2012-02-01

At liver surgery planning stage, the liver volumetry would be essential for surgeons. Main problem at liver extraction is the wide variability of livers in shapes and sizes. Since, hepatic blood vessels structure varies from a person to another and covers liver region, the present method uses that information for extraction of liver in two stages. The first stage is to extract abdominal blood vessels in the form of hepatic and nonhepatic blood vessels. At the second stage, extracted vessels are used to control extraction of liver region automatically. Contrast enhanced CT datasets at only the portal phase of 50 cases is used. Those data include 30 abnormal livers. A reference for all cases is done through a comparison of two experts labeling results and correction of their inter-reader variability. Results of the proposed method agree with the reference at an average rate of 97.8%. Through application of different metrics mentioned at MICCAI workshop for liver segmentation, it is found that: volume overlap error is 4.4%, volume difference is 0.3%, average symmetric distance is 0.7 mm, Root mean square symmetric distance is 0.8 mm, and maximum distance is 15.8 mm. These results represent the average of overall data and show an improved accuracy compared to current liver segmentation methods. It seems to be a promising method for extraction of liver volumetry of various shapes and sizes.

Understanding the atomic-level Green-Kubo stress correlation function for a liquid through phonons in a model crystal

NASA Astrophysics Data System (ADS)

Levashov, V. A.

2014-11-01

In order to gain insight into the connection between the vibrational dynamics and the atomic-level Green-Kubo stress correlation function in liquids, we consider this connection in a model crystal instead. Of course, vibrational dynamics in liquids and crystals are quite different and it is not expected that the results obtained on a model crystal should be valid for liquids. However, these considerations provide a benchmark to which the results of the previous molecular dynamics simulations can be compared. Thus, assuming that vibrations are plane waves, we derive analytical expressions for the atomic-level stress correlation functions in the classical limit and analyze them. These results provide, in particular, a recipe for analysis of the atomic-level stress correlation functions in Fourier space and extraction of the wave-vector and frequency-dependent information. We also evaluate the energies of the atomic-level stresses. The energies obtained are significantly smaller than the energies previously determined in molecular dynamics simulations of several model liquids. This result suggests that the average energies of the atomic-level stresses in liquids and glasses are largely determined by the structural disorder. We discuss this result in the context of equipartition of the atomic-level stress energies. Analysis of the previously published data suggests that it is possible to speak about configurational and vibrational contributions to the average energies of the atomic-level stresses in a glass state. However, this separation in a liquid state is problematic. We also introduce and briefly consider the atomic-level transverse current correlation function. Finally, we address the broadening of the peaks in the pair distribution function with increase of distance. We find that the peaks' broadening (by ≈40 % ) occurs due to the transverse vibrational modes, while contribution from the longitudinal modes does not change with distance.

Estimating neuronal connectivity from axonal and dendritic density fields

PubMed Central

van Pelt, Jaap; van Ooyen, Arjen

2013-01-01

Neurons innervate space by extending axonal and dendritic arborizations. When axons and dendrites come in close proximity of each other, synapses between neurons can be formed. Neurons vary greatly in their morphologies and synaptic connections with other neurons. The size and shape of the arborizations determine the way neurons innervate space. A neuron may therefore be characterized by the spatial distribution of its axonal and dendritic “mass.” A population mean “mass” density field of a particular neuron type can be obtained by averaging over the individual variations in neuron geometries. Connectivity in terms of candidate synaptic contacts between neurons can be determined directly on the basis of their arborizations but also indirectly on the basis of their density fields. To decide when a candidate synapse can be formed, we previously developed a criterion defining that axonal and dendritic line pieces should cross in 3D and have an orthogonal distance less than a threshold value. In this paper, we developed new methodology for applying this criterion to density fields. We show that estimates of the number of contacts between neuron pairs calculated from their density fields are fully consistent with the number of contacts calculated from the actual arborizations. However, the estimation of the connection probability and the expected number of contacts per connection cannot be calculated directly from density fields, because density fields do not carry anymore the correlative structure in the spatial distribution of synaptic contacts. Alternatively, these two connectivity measures can be estimated from the expected number of contacts by using empirical mapping functions. The neurons used for the validation studies were generated by our neuron simulator NETMORPH. An example is given of the estimation of average connectivity and Euclidean pre- and postsynaptic distance distributions in a network of neurons represented by their population mean density fields. PMID:24324430

Insight on agglomerates of gold nanoparticles in glass based on surface plasmon resonance spectrum: study by multi-spheres T-matrix method

NASA Astrophysics Data System (ADS)

Avakyan, L. A.; Heinz, M.; Skidanenko, A. V.; Yablunovski, K. A.; Ihlemann, J.; Meinertz, J.; Patzig, C.; Dubiel, M.; Bugaev, L. A.

2018-01-01

The formation of a localized surface plasmon resonance (SPR) spectrum of randomly distributed gold nanoparticles in the surface layer of silicate float glass, generated and implanted by UV ArF-excimer laser irradiation of a thin gold layer sputter-coated on the glass surface, was studied by the T-matrix method, which enables particle agglomeration to be taken into account. The experimental technique used is promising for the production of submicron patterns of plasmonic nanoparticles (given by laser masks or gratings) without damage to the glass surface. Analysis of the applicability of the multi-spheres T-matrix (MSTM) method to the studied material was performed through calculations of SPR characteristics for differently arranged and structured gold nanoparticles (gold nanoparticles in solution, particles pairs, and core-shell silver-gold nanoparticles) for which either experimental data or results of the modeling by other methods are available. For the studied gold nanoparticles in glass, it was revealed that the theoretical description of their SPR spectrum requires consideration of the plasmon coupling between particles, which can be done effectively by MSTM calculations. The obtained statistical distributions over particle sizes and over interparticle distances demonstrated the saturation behavior with respect to the number of particles under consideration, which enabled us to determine the effective aggregate of particles, sufficient to form the SPR spectrum. The suggested technique for the fitting of an experimental SPR spectrum of gold nanoparticles in glass by varying the geometrical parameters of the particles aggregate in the recurring calculations of spectrum by MSTM method enabled us to determine statistical characteristics of the aggregate: the average distance between particles, average size, and size distribution of the particles. The fitting strategy of the SPR spectrum presented here can be applied to nanoparticles of any nature and in various substances, and, in principle, can be extended for particles with non-spherical shapes, like ellipsoids, rod-like and other T-matrix-solvable shapes.