Distribution, Source, and Ecological Risk Assessment of Polycyclic Aromatic Hydrocarbons in Surface Sediment of Liaodong Bay, Northeast China

NASA Astrophysics Data System (ADS)

Xu, Shuang; Tao, Ping; Li, Yuxia; Guo, Qi; Zhang, Yan; Wang, Man; Jia, Hongliang; Shao, Mihua

2018-01-01

Sixteen polycyclic aromatic hydrocarbons (PAHs) were determined in surface sediments from Liaodong Bay, northeast China. The concentration levels of total PAHs (Σ16PAHs) in sediment were 11.0˜249.6 ng·g-1 dry weight (dw), with a mean value of 89.9 ng·g-1 dry weight (dw). From the point of the spatial distribution, high PAHs levels were found in the western areas of Liaodong Bay. In the paper, sources of PAHs were investigated by diagnostic ratios, which indicated that pyrogenic sources were the main sources of PAHs in the sediment of Liaodong Bay. Therefore, selected PAH levels in sediments were compared with Sediments Quality Guidelines (ERM-ERL indexes) for evaluation probable toxic effects on marine organism.

Floodplains as a source of fine sediment in grazed landscapes: tracing the source of suspended sediment in the headwaters of an intensively managed agricultural landscape

NASA Astrophysics Data System (ADS)

Yu, M.; Rhoads, B. L.; Stumpf, A.

2017-12-01

The flux of fine sediment within agricultural watersheds is an important factor determining the environmental quality of streams and rivers. Despite this importance, the contributions of sediment sources to suspended sediment loads within intensively managed agricultural watersheds remain poorly understood. This study assesses the provenance of fine suspended sediment in the headwater portion of a river flowing through an agricultural landscape in Illinois. Sediment source samples were collected from five potential sources: streambanks, forested floodplain, grassland, and grazed floodplains. Event-based and aggregated suspended sediment samples were collected from the stream at the watershed outlet. Quantitative geochemical fingerprinting techniques and a mixing model were employed to estimate the relative contributions of sediment from five potential sources to the suspended sediment loads. Organic matter content, trace elements, and fallout radionuclides were used as potential tracers. Principal Component analysis was employed to complement the results and Monte Carlo random sampling routine was used to test the uncertainty in estimated contributions of sources to in-stream sediment loads. Results indicate that the majority of suspended sediment is derived from streambanks and grazed floodplains. Erosion of the floodplain both by surface runoff and by streambank erosion from lateral channel migration contributes to the production of fine sediment within the stream system. These results suggest that human activities, in this case grazing, have converted portions of floodplains, normally net depositional environments, into sources of fine sediments. Efforts to reduce fluxes of fine sediment in this intensively managed landscape should focus on degraded floodplain surfaces and eroding channel banks within heavily grazed reaches of the stream.

Estimation of Sediment Sources Using Selected Chemical Tracers in the Perry Lake and Lake Wabaunsee Basins, Northeast Kansas

USGS Publications Warehouse

Juracek, Kyle E.; Ziegler, Andrew C.

2007-01-01

In Kansas and nationally, stream and lake sediment is a primary concern as related to several important issues including water quality and reservoir water-storage capacity. The ability to achieve meaningful decreases in sediment loads to reservoirs requires a determination of the relative importance of sediment sources within the contributing basins. To investigate sources of sediment within the Perry Lake and Lake Wabaunsee Basins of northeast Kansas, representative samples of channel-bank sources, surface-soil sources (cropland and grassland), and reservoir bottom sediment were collected, analyzed, and compared. Subbasins sampled within the Perry Lake Basin included Atchison County Lake, Banner Creek Reservoir, Gregg Creek, Mission Lake, and Walnut Creek. The samples were sieved to isolate the less than 63-micron fraction (that is, the silt and clay) and analyzed for selected nutrients (total nitrogen and total phosphorus), organic and total carbon, 25 trace elements, and the radionuclide cesium-137 (137Cs). To determine which of the 30 constituents provided the best ability to discriminate between channel-bank and surface-soil sources in the two basins, four selection criteria were used. To be selected, it was required that the candidate constituent (1) was detectable, (2) had concentrations or activities that varied substantially and consistently between the sources, (3) had concentration or activity ranges that did not overlap between the sources, and (4) had concentration or activity differences between the sources that were statistically significant. On the basis of the four selection criteria, total nitrogen (TN), total phosphorus (TP), total organic carbon (TOC), and 137Cs were selected. Of the four selected constituents, 137Cs likely is the most reliable indicator of sediment source because it is known to be conservative in the environment. Trace elements were not selected because concentrations in the channel-bank and surface-soil sources generally were similar or did not vary in a consistent manner. To further account for differences in particle-size composition between the sources and the reservoir bottom sediment prior to the sediment-source estimations, constituent ratio and clay-normalization techniques were used. Computed ratios included the ratio of TOC to TN, TOC to TP, and TN to TP. Constituent concentrations (TN, TP, TOC) and activities (137Cs) were normalized by dividing by the percentage of clay. Thus, the sediment-source estimations involved the use of seven sediment-source indicators (that is, three constituent ratios and the clay-normalized concentration or activity for four constituents). Sediment-source estimation for each reservoir was based on a comparison between the reservoir bottom sediment and the end member channel-bank and surface-soil sources. Within the Perry Lake Basin, the seven-indicator consensus indicated that both channel-bank and surface-soil sources were important contributors of the sediment deposited in Atchison County Lake and Banner Creek Reservoir, whereas channel-bank sources were the dominant source of sediment for Mission Lake. On the sole basis of 137Cs activity, surface-soil sources contributed the most sediment to Atchison County Lake, and channel-bank sources contributed the most sediment to Banner Creek Reservoir and Mission Lake. For Perry Lake, both the seven-indicator consensus and 137Cs indicated that channel-bank sources were dominant and that channel-bank sources increased in importance with distance downstream in the Perry Lake Basin. For Lake Wabaunsee, the seven-indicator consensus and 137Cs indicated that both channel-bank and surface-soil sources were important. Given that the relative contribution of sediment from channel-bank and surface-soil sources can vary within and between basins and over time, basin-specific strategies for sediment management and monitoring are appropriate.

NEAR-COASTAL SEDIMENT AS A HABITAT IN THE GULF OF MEXICO: CHEMICAL QUALITY, TOXICITY, AND BENTHIC COMMUNITY COMPOSITION

EPA Science Inventory

Sediment quality was determined in a multiyear study for 108 near-coastal sites located in Mississippi, Alabama and Florida. The primary objective of the study was to determine the relative impact of common stressor sources on sediment quality utilizing a weight-of-evidence appro...

Using sediment particle size distribution to evaluate sediment sources in the Tobacco Creek Watershed

NASA Astrophysics Data System (ADS)

Liu, Cenwei; Lobb, David; Li, Sheng; Owens, Philip; Kuzyk, ZouZou

2014-05-01

Lake Winnipeg has recently brought attention to the deteriorated water quality due to in part to nutrient and sediment input from agricultural land. Improving water quality in Lake Winnipeg requires the knowledge of the sediment sources within this ecosystem. There are a variety of environmental fingerprinting techniques have been successfully used in the assessment of sediment sources. In this study, we used particle size distribution to evaluate spatial and temporal variations of suspended sediment and potential sediment sources collected in the Tobacco Creek Watershed in Manitoba, Canada. The particle size distribution of suspended sediment can reflect the origin of sediment and processes during sediment transport, deposition and remobilization within the watershed. The objectives of this study were to quantify visually observed spatial and temporal changes in sediment particles, and to assess the sediment source using a rapid and cost-effective fingerprinting technique based on particle size distribution. The suspended sediment was collected by sediment traps twice a year during rainfall and snowmelt periods from 2009 to 2012. The potential sediment sources included the top soil of cultivated field, riparian area and entire profile from stream banks. Suspended sediment and soil samples were pre-wet with RO water and sieved through 600 μm sieve before analyzing. Particle size distribution of all samples was determined using a Malvern Mastersizer 2000S laser diffraction with the measurement range up to 600μm. Comparison of the results for different fractions of sediment showed significant difference in particle size distribution of suspended sediment between snowmelt and rainfall events. An important difference of particle size distribution also found between the cultivated soil and forest soil. This difference can be explained by different land uses which provided a distinct fingerprint of sediment. An overall improvement in water quality can be achieved by managing sediment according to the identified sediment sources in the watershed.

Mapping, Monitoring, and Modeling Geomorphic Processes to Identify Sources of Anthropogenic Sediment Pollution in West Maui, Hawai'i

NASA Astrophysics Data System (ADS)

Cerovski-Darriau, C.; Stock, J. D.; Winans, W. R.

2016-12-01

Episodic storm runoff in West Maui (Hawai'i) brings plumes of terrestrially-sourced fine sediment to the nearshore ocean environment, degrading coral reef ecosystems. The sediment pollution sources were largely unknown, though suspected to be due to modern human disturbance of the landscape, and initially assumed to be from visibly obvious exposed soil on agricultural fields and unimproved roads. To determine the sediment sources and estimate a sediment budget for the West Maui watersheds, we mapped the geomorphic processes in the field and from DEMs and orthoimagery, monitored erosion rates in the field, and modeled the sediment flux using the mapped processes and corresponding rates. We found the primary source of fine sands, silts and clays to be previously unidentified fill terraces along the stream bed. These terraces, formed during legacy agricultural activity, are the banks along 40-70% of the streams where the channels intersect human-modified landscapes. Monitoring over the last year shows that a few storms erode the fill terraces 10-20 mm annually, contributing up to 100s of tonnes of sediment per catchment. Compared to the average long-term, geologic erosion rate of 0.03 mm/yr, these fill terraces alone increase the suspended sediment flux to the coral reefs by 50-90%. Stakeholders can use our resulting geomorphic process map and sediment budget to inform the location and type of mitigation effort needed to limit terrestrial sediment pollution. We compare our mapping, monitoring, and modeling (M3) approach to NOAA's OpenNSPECT model. OpenNSPECT uses empirical hydrologic and soil erosion models paired with land cover data to compare the spatially distributed sediment yield from different land-use scenarios. We determine the relative effectiveness of calculating a baseline watershed sediment yield from each approach, and the utility of calibrating OpenNSEPCT with M3 results to better forecast future sediment yields from land-use or climate change scenarios.

Estimation of sediment sources using selected chemical tracers in the Perry lake basin, Kansas, USA

USGS Publications Warehouse

Juracek, K.E.; Ziegler, A.C.

2009-01-01

The ability to achieve meaningful decreases in sediment loads to reservoirs requires a determination of the relative importance of sediment sources within the contributing basins. In an investigation of sources of fine-grained sediment (clay and silt) within the Perry Lake Basin in northeast Kansas, representative samples of channel-bank sources, surface-soil sources (cropland and grassland), and reservoir bottom sediment were collected, chemically analyzed, and compared. The samples were sieved to isolate the <63 ?? m fraction and analyzed for selected nutrients (total nitrogen and total phosphorus), organic and total carbon, 25 trace elements, and the radionuclide cesium-137 (137Cs). On the basis of substantial and consistent compositional differences among the source types, total nitrogen (TN), total phosphorus (TP), total organic carbon (TOC), and 137Cs were selected for use in the estimation of sediment sources. To further account for differences in particle-size composition between the sources and the reservoir bottom sediment, constituent ratio and clay-normalization techniques were used. Computed ratios included TOC to TN, TOC to TP, and TN to TP. Constituent concentrations (TN, TP, TOC) and activities (137Cs) were normalized by dividing by the percentage of clay. Thus, the sediment-source estimations involved the use of seven sediment-source indicators. Within the Perry Lake Basin, the consensus of the seven indicators was that both channel-bank and surface-soil sources were important in the Atchison County Lake and Banner Creek Reservoir subbasins, whereas channel-bank sources were dominant in the Mission Lake subbasin. On the sole basis of 137Cs activity, surface-soil sources contributed the most fine-grained sediment to Atchison County Lake, and channel-bank sources contributed the most fine-grained sediment to Banner Creek Reservoir and Mission Lake. Both the seven-indicator consensus and 137Cs indicated that channel-bank sources were dominant for Perry Lake and that channel-bank sources increased in importance with distance downstream in the basin. ?? 2009 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

Comparing geological and statistical approaches for element selection in sediment tracing research

NASA Astrophysics Data System (ADS)

Laceby, J. Patrick; McMahon, Joe; Evrard, Olivier; Olley, Jon

2015-04-01

Elevated suspended sediment loads reduce reservoir capacity and significantly increase the cost of operating water treatment infrastructure, making the management of sediment supply to reservoirs of increasingly importance. Sediment fingerprinting techniques can be used to determine the relative contributions of different sources of sediment accumulating in reservoirs. The objective of this research is to compare geological and statistical approaches to element selection for sediment fingerprinting modelling. Time-integrated samplers (n=45) were used to obtain source samples from four major subcatchments flowing into the Baroon Pocket Dam in South East Queensland, Australia. The geochemistry of potential sources were compared to the geochemistry of sediment cores (n=12) sampled in the reservoir. The geochemical approach selected elements for modelling that provided expected, observed and statistical discrimination between sediment sources. Two statistical approaches selected elements for modelling with the Kruskal-Wallis H-test and Discriminatory Function Analysis (DFA). In particular, two different significance levels (0.05 & 0.35) for the DFA were included to investigate the importance of element selection on modelling results. A distribution model determined the relative contributions of different sources to sediment sampled in the Baroon Pocket Dam. Elemental discrimination was expected between one subcatchment (Obi Obi Creek) and the remaining subcatchments (Lexys, Falls and Bridge Creek). Six major elements were expected to provide discrimination. Of these six, only Fe2O3 and SiO2 provided expected, observed and statistical discrimination. Modelling results with this geological approach indicated 36% (+/- 9%) of sediment sampled in the reservoir cores were from mafic-derived sources and 64% (+/- 9%) were from felsic-derived sources. The geological and the first statistical approach (DFA0.05) differed by only 1% (σ 5%) for 5 out of 6 model groupings with only the Lexys Creek modelling results differing significantly (35%). The statistical model with expanded elemental selection (DFA0.35) differed from the geological model by an average of 30% for all 6 models. Elemental selection for sediment fingerprinting therefore has the potential to impact modeling results. Accordingly is important to incorporate both robust geological and statistical approaches when selecting elements for sediment fingerprinting. For the Baroon Pocket Dam, management should focus on reducing the supply of sediments derived from felsic sources in each of the subcatchments.

Estimating sedimentation rates and sources in a partially urbanized catchment using caesium-137

NASA Astrophysics Data System (ADS)

Ormerod, L. M.

1998-06-01

While there has been increased interest in determining sedimentation rates and sources in agricultural and forested catchments in recent years, there have been few studies dealing with urbanized catchments. A study of sedimentation rates and sources within channel and floodplain deposits of a partially urbanized catchment has been undertaken using the 137Cs technique. Results for sedimentation rates showed no particular downstream pattern. This may be partially explained by underestimation of sedimentation rates at some sites by failure to sample the full 137Cs profile, floodplain erosion and deliberate removal of sediment. Evidence of lateral increases in net sedimentation rates with distance from the channel may be explained by increased floodplain erosion at sites closer to the channel and floodplain formation by lateral deposition. Potential sediment sources for the catchment were considered to be forest topsoil, subsurface material and sediments derived from urban areas, which were found to be predominantly subsurface material. Tracing techniques showed an increase in subsurface material for downstream sites, confirming expectations that subsurface material would increase in the downstream direction in response to the direct and indirect effects of urbanization.

The impacts of tracer selection and corrections for organic matter and particle size on the results of quantitative sediment fingerprinting. A case study from the Nene basin, UK.

NASA Astrophysics Data System (ADS)

Pulley, Simon; Ian, Foster; Paula, Antunes

2014-05-01

In recent years, sediment fingerprinting methodologies have gained widespread adoption when tracing sediment provenance in geomorphological research. A wide variety of tracers have been employed in the published literature, with corrections for particle size and organic matter applied when the researcher judged them necessary. This paper aims to explore the errors associated with tracer use by a comparison of fingerprinting results obtained using fallout and lithogenic radionuclides, geochemical, and mineral magnetic tracers in a range of environments located in the Nene basin, UK. Specifically, fingerprinting was undertaken on lake, reservoir and floodplain sediment cores, on actively transported suspended sediment and on overbank and channel bed sediment deposits. Tracer groups were investigated both alone and in combination to determine the differences between their sediment provenance predictions and potential causes of these differences. Additionally, simple organic and particle size corrections were applied to determine if they improve the agreement between the tracer group predictions. Key results showed that when fingerprinting contributions from channel banks to actively transported or recently deposited sediments the tracer group predictions varied by 24% on average. These differences could not be clearly attributed to changes in the sediment during erosion or transport. Instead, the most likely cause of differences was the pre-existing spatial variability in tracer concentrations within sediment sources, combined with highly localised erosion. This resulted in the collected sediment source samples not being representative of the actual sediment sources. Average differences in provenance predictions between the different tracer groups in lake, reservoir and floodplain sediment cores were lowest in the reservoir core at 19% and highest in some floodplain cores, with differences in predictions in excess of 50%. In these latter samples organic enrichment of the sediment, selective transport of fine particles and post-depositional chemical changes to the sediment were determined to be the likely cause of the differences. It was determined that organic and particle size corrections made the differences between tracer groups larger in most cases, although differences between tracer group predictions were reduced in two of the four floodplain cores.

Differentiating the sources of fine sediment, organic matter and nitrogen in a subtropical Australian catchment.

PubMed

Garzon-Garcia, Alexandra; Laceby, J Patrick; Olley, Jon M; Bunn, Stuart E

2017-01-01

Understanding the sources of sediment, organic matter and nitrogen (N) transferred from terrestrial to aquatic environments is important for managing the deleterious off-site impacts of soil erosion. In particular, investigating the sources of organic matter associated with fine sediment may also provide insight into carbon (C) and N budgets. Accordingly, the main sources of fine sediment, organic matter (indicated by total organic carbon), and N are determined for three nested catchments (2.5km 2 , 75km 2 , and 3076km 2 ) in subtropical Australia. Source samples included subsoil and surface soil, along with C 3 and C 4 vegetation. All samples were analysed for stable isotopes (δ 13 C, δ 15 N) and elemental composition (TOC, TN). A stable isotope mixing model (SIAR) was used to determine relative source contributions for different spatial scales (nested catchments), climatic conditions and flow stages. Subsoil was the main source of fine sediment for all catchments (82%, SD=1.15) and the main N source at smaller scales (55-76%, SD=4.6-10.5), with an exception for the wet year and at the larger catchment, where surface soil was the dominant N source (55-61%, SD=3.6-9.9), though contributions were dependent on flow (59-680m 3 /s). C 3 litter was the main source of organic C export for the two larger catchments (53%, SD=3.8) even though C 4 grasses dominate the vegetation cover in these catchments. The sources of fine sediment, organic matter and N differ in subtropical catchments impacted by erosion, with the majority of C derived from C 3 leaf litter and the majority of N derived from either subsoil or surface soil. Understanding these differences will assist management in reducing sediment, organic matter and N transfers in similar subtropical catchments while providing a quantitative foundation for testing C and N budgets. Copyright © 2016 Elsevier B.V. All rights reserved.

Sources and Deposition of Polycyclic Aromatic Hydrocarbons to Western U.S. National Parks

PubMed Central

USENKO, SASCHA; MASSEY SIMONICH, STACI L.; HAGEMAN, KIMBERLY J.; SCHRLAU, JILL E.; GEISER, LINDA; CAMPBELL, DON H.; APPLEBY, PETER G.; LANDERS, DIXON H.

2010-01-01

Seasonal snowpack, lichens, and lake sediment cores were collected from fourteen lake catchments in eight western U.S. National Parks and analyzed for sixteen polycyclic aromatic hydrocarbons (PAHs) in order to determine their current and historical deposition, as well as to identify their potential sources. Seasonal snowpack was measured to determine the current wintertime atmospheric PAH deposition; lichens were measured to determine the long-term, year around deposition; and the temporal PAH deposition trends were reconstructed using lake sediment cores dated using 210Pb and 137Cs. The fourteen remote lake catchments ranged from low-latitude catchments (36.6° N) at high elevation (2900 masl) in Sequoia National Park, CA to high-latitude catchments (68.4° N) at low elevation (427 masl) in the Alaskan Arctic. Over 75% of the catchments demonstrated statistically significant temporal trends in ΣPAH sediment flux, depending on catchment proximity to source regions and topographic barriers. The ΣPAH concentrations and fluxes in seasonal snowpack, lichens, and surficial sediment were 3.6 to 60,000 times greater in the Snyder Lake catchment of Glacier National Park than the other 13 lake catchments. The PAH ratios measured in snow, lichen, and sediment were used to identify a local aluminum smelter as a major source of PAHs to the Snyder Lake catchment. These results suggest that topographic barriers influence the atmospheric transport and deposition of PAHs in high-elevation ecosystems and that PAH sources to these national park ecosystems range from local point sources to diffuse regional and global sources. PMID:20465303

Novel MixSIAR fingerprint model implementation in a Mediterranean mountain catchment

NASA Astrophysics Data System (ADS)

Lizaga, Ivan; Gaspar, Leticia; Blake, William; Palazón, Leticia; Quijano, Laura; Navas, Ana

2017-04-01

Increased sediment erosion levels can lead to degraded water and food quality, reduced aquatic biodiversity, decrease reservoir capacity and restrict recreational usage but determining soil redistribution and sediment budgets in watersheds is often challenging. One of the methods for making such determinations applies sediment fingerprinting methods by using sediment properties. The fingerprinting procedure tests a range of source material tracer properties to select a subset that can discriminate between the different potential sediment sources. The present study aims to test the feasibility of geochemical and radioisotopic fingerprint properties to apportion sediment sources within the Barués catchment. For this purpose, the new MixSIAR unmixing model was implemented as statistical tool. A total of 98 soil samples from different land cover sources (Mediterranean forest, pine forest scrubland, agricultural and subsoil) were collected in the Barués catchment (23 km2). This new approach divides the catchment into six different sub-catchments to evaluate how the sediment provenance varies along the river and the percentage of its sources and not only the contribution at the end. For this purpose, target sediments were collected at the end of each sub-catchment to introduce the variation along the entire catchment. Geochemistry and radioisotopic activity were analyzed for each sample and introduced as input parameters in the model. Percentage values from the five sources were different along the different subcatchments and the variations of all of them are summarized at the final target sample located at the end of the catchment. This work represents a good approximation to the fine sediment provenance in Mediterranean agricultural catchments and has the potential to be used for water resource control and future soil management. Identifying sediment contribution from different land uses offers considerable potential to prevent environmental degradation and the decrease in food production and quality.

Floodplains as a source of fine sediment in grazed landscapes: Tracing the source of suspended sediment in the headwaters of an intensively managed agricultural landscape

NASA Astrophysics Data System (ADS)

Yu, Mingjing; Rhoads, Bruce L.

2018-05-01

The flux of fine sediment within agricultural watersheds is an important factor determining the environmental quality of streams and rivers. Despite this importance, the contributions of sediment sources to suspended sediment loads within intensively managed agricultural watersheds remain poorly understood. This study assesses the provenance of fine suspended sediment in the headwater portion of a river flowing through an agricultural landscape in Illinois. Sediment source samples were collected from five sources: croplands, forested floodplains, grasslands, upper grazed floodplains, and lower grazed floodplains. Event-based and aggregated suspended sediment samples were collected from the stream at the watershed outlet. Quantitative geochemical fingerprinting techniques and a mixing model were employed to estimate the relative contributions of sediment from the five sources to the suspended sediment loads. To account for possible effects of small sample sizes, the analysis was repeated with only two sources: grazed floodplains and croplands/grasslands/forested floodplains. Results based on mean values of tracers indicate that the vast majority of suspended sediment within the stream (>95%) is derived from erosion of channel banks and the soil surface within areas of grazed floodplains. Uncertainty analysis based on Monte Carlo simulations indicates that mean values of tracer properties, which do not account for sampling variability in these properties, probably overestimate contributions from the two major sources. Nevertheless, this analysis still supports the conclusion that floodplain erosion accounts for the largest percentage of instream sediment (≈55-75%). Although grazing occurs over only a small portion of the total watershed area, grazed floodplains, which lie in close proximity to the stream channel, are an important source of sediment in this headwater steam system. Efforts to reduce fluxes of fine sediment in this intensively managed landscape should focus on eroding floodplain surfaces and channel banks within heavily grazed reaches of the stream.

Ascribing soil erosion of hillslope components to river sediment yield.

PubMed

Nosrati, Kazem

2017-06-01

In recent decades, soil erosion has increased in catchments of Iran. It is, therefore, necessary to understand soil erosion processes and sources in order to mitigate this problem. Geomorphic landforms play an important role in influencing water erosion. Therefore, ascribing hillslope components soil erosion to river sediment yield could be useful for soil and sediment management in order to decrease the off-site effects related to downstream sedimentation areas. The main objectives of this study were to apply radionuclide tracers and soil organic carbon to determine relative contributions of hillslope component sediment sources in two land use types (forest and crop field) by using a Bayesian-mixing model, as well as to estimate the uncertainty in sediment fingerprinting in a mountainous catchment of western Iran. In this analysis, 137 Cs, 40 K, 238 U, 226 Ra, 232 Th and soil organic carbon tracers were measured in 32 different sampling sites from four hillslope component sediment sources (summit, shoulder, backslope, and toeslope) in forested and crop fields along with six bed sediment samples at the downstream reach of the catchment. To quantify the sediment source proportions, the Bayesian mixing model was based on (1) primary sediment sources and (2) combined primary and secondary sediment sources. The results of both approaches indicated that erosion from crop field shoulder dominated the sources of river sediments. The estimated contribution of crop field shoulder for all river samples was 63.7% (32.4-79.8%) for primary sediment sources approach, and 67% (15.3%-81.7%) for the combined primary and secondary sources approach. The Bayesian mixing model, based on an optimum set of tracers, estimated that the highest contribution of soil erosion in crop field land use and shoulder-component landforms constituted the most important land-use factor. This technique could, therefore, be a useful tool for soil and sediment control management strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Use of stable isotope signatures to determine mercury sources in the Great Lakes

USGS Publications Warehouse

Lepak, Ryan F.; Yin, Runsheng; Krabbenhoft, David P.; Ogorek, Jacob M.; DeWild, John F.; Holsen, Thomas M.; Hurley, James P.

2015-01-01

Sources of mercury (Hg) in Great Lakes sediments were assessed with stable Hg isotope ratios using multicollector inductively coupled plasma mass spectrometry. An isotopic mixing model based on mass-dependent (MDF) and mass-independent fractionation (MIF) (δ202Hg and Δ199Hg) identified three primary Hg sources for sediments: atmospheric, industrial, and watershed-derived. Results indicate atmospheric sources dominate in Lakes Huron, Superior, and Michigan sediments while watershed-derived and industrial sources dominate in Lakes Erie and Ontario sediments. Anomalous Δ200Hg signatures, also apparent in sediments, provided independent validation of the model. Comparison of Δ200Hg signatures in predatory fish from three lakes reveals that bioaccumulated Hg is more isotopically similar to atmospherically derived Hg than a lake’s sediment. Previous research suggests Δ200Hg is conserved during biogeochemical processing and odd mass-independent fractionation (MIF) is conserved during metabolic processing, so it is suspected even is similarly conserved. Given these assumptions, our data suggest that in some cases, atmospherically derived Hg may be a more important source of MeHg to higher trophic levels than legacy sediments in the Great Lakes.

Suspended sediments from upstream tributaries as the source of downstream river sites

NASA Astrophysics Data System (ADS)

Haddadchi, Arman; Olley, Jon

2014-05-01

Understanding the efficiency with which sediment eroded from different sources is transported to the catchment outlet is a key knowledge gap that is critical to our ability to accurately target and prioritise management actions to reduce sediment delivery. Sediment fingerprinting has proven to be an efficient approach to determine the sources of sediment. This study examines the suspended sediment sources from Emu Creek catchment, south eastern Queensland, Australia. In addition to collect suspended sediments from different sites of the streams after the confluence of tributaries and outlet of the catchment, time integrated suspended samples from upper tributaries were used as the source of sediment, instead of using hillslope and channel bank samples. Totally, 35 time-integrated samplers were used to compute the contribution of suspended sediments from different upstream waterways to the downstream sediment sites. Three size fractions of materials including fine sand (63-210 μm), silt (10-63 μm) and fine silt and clay (<10 μm) were used to find the effect of particle size on the contribution of upper sediments as the sources of sediment after river confluences. And then samples were analysed by ICP-MS and -OES to find 41 sediment fingerprints. According to the results of Student's T-distribution mixing model, small creeks in the middle and lower part of the catchment were major source in different size fractions, especially in silt (10-63 μm) samples. Gowrie Creek as covers southern-upstream part of the catchment was a major contributor at the outlet of the catchment in finest size fraction (<10 μm) Large differences between the contributions of suspended sediments from upper tributaries in different size fractions necessitate the selection of appropriate size fraction on sediment tracing in the catchment and also major effect of particle size on the movement and deposition of sediments.

STORAGE DURATION AND TEMPERATURE AND THE ACUTE TOXICITIES OF ESTUARINE SEDIMENTS TO MYSIDOPSIS BAHIA AND LEPTOCHEIRUS PLUMULOSUS.

EPA Science Inventory

Many statutory needs for sediment quality assessment exist (U.S. EPA 1996). A variety of sediment toxicity tests have been used to support the development of sediment quality guidelines and to determine the benthic impacts of dredging activities and point and non-point source tox...

STORAGE DURATION AND TEMPERATURE AND THE ACUTE TOXICITIES OF ESTUARINE SEDIMENTS TO MYSIDOPSIS BAHIA AND LEPTOCHEIRUS PLUMULOSUS

EPA Science Inventory

Many statutory needs for sediment quality assessment exist (U.S. EPA 1996). A variety of sediment toxicity tests have been used to support the development of sediment quality guidelines and to determine the benthic impacts of dredging activities and point and non-point source tox...

Sediment sources in an urbanizing, mixed land-use watershed

NASA Astrophysics Data System (ADS)

Nelson, Erin J.; Booth, Derek B.

2002-07-01

The Issaquah Creek watershed is a rapidly urbanizing watershed of 144 km 2 in western Washington, where sediment aggradation of the main channel and delivery of fine sediment into a large downstream lake have raised increasingly frequent concerns over flooding, loss of fish habitat, and degraded water quality. A watershed-scale sediment budget was evaluated to determine the relative effects of land-use practices, including urbanization, on sediment supply and delivery, and to guide management responses towards the most effective source-reduction strategies. Human activity in the watershed, particularly urban development, has caused an increase of nearly 50% in the annual sediment yield, now estimated to be 44 tonnes km -2 yr -1. The main sources of sediment in the watershed are landslides (50%), channel-bank erosion (20%), and road-surface erosion (15%). This assessment characterizes the role of human activity in mixed-use watersheds such as this, and it demonstrates some of the key processes, particularly enhanced stream-channel erosion, by which urban development alters sediment loads.

A Spatially Distributed Conceptual Model for Estimating Suspended Sediment Yield in Alpine catchments

NASA Astrophysics Data System (ADS)

Costa, Anna; Molnar, Peter; Anghileri, Daniela

2017-04-01

Suspended sediment is associated with nutrient and contaminant transport in water courses. Estimating suspended sediment load is relevant for water-quality assessment, recreational activities, reservoir sedimentation issues, and ecological habitat assessment. Suspended sediment concentration (SSC) along channels is usually reproduced by suspended sediment rating curves, which relate SSC to discharge with a power law equation. Large uncertainty characterizes rating curves based only on discharge, because sediment supply is not explicitly accounted for. The aim of this work is to develop a source-oriented formulation of suspended sediment dynamics and to estimate suspended sediment yield at the outlet of a large Alpine catchment (upper Rhône basin, Switzerland). We propose a novel modelling approach for suspended sediment which accounts for sediment supply by taking into account the variety of sediment sources in an Alpine environment, i.e. the spatial location of sediment sources (e.g. distance from the outlet and lithology) and the different processes of sediment production and transport (e.g. by rainfall, overland flow, snowmelt). Four main sediment sources, typical of Alpine environments, are included in our model: glacial erosion, hillslope erosion, channel erosion and erosion by mass wasting processes. The predictive model is based on gridded datasets of precipitation and air temperature which drive spatially distributed degree-day models to simulate snowmelt and ice-melt, and determine erosive rainfall. A mass balance at the grid scale determines daily runoff. Each cell belongs to a different sediment source (e.g. hillslope, channel, glacier cell). The amount of sediment entrained and transported in suspension is simulated through non-linear functions of runoff, specific for sediment production and transport processes occurring at the grid scale (e.g. rainfall erosion, snowmelt-driven overland flow). Erodibility factors identify different lithological units, while the distance from the outlet is accounted for by including sediment wave velocities. The model is calibrated and validated on the basis of continuous turbidity data measured at the outlet of the basin. In addition, SSC data measured twice per week since 1964 are used to evaluate the performance of the model over longer time scales. Our predictive model is shown to reproduce SSC dynamics of the upper Rhône basin satisfactorily. The model accounts for the spatial distribution of sediment sources (location and processes of erosion and transport) and their activation/deactivation throughout the hydrological year. Therefore, it can reproduce the effects of changes in climate on sediment fluxes. In particular, we show that observed changes in SSC in the upper Rhône basin during the last 40 years are likely a consequence of increased air temperatures in this period and the consequent acceleration of glacial erosion.

FIELD VALIDATION OF SEDIMENT TIE METHODS

EPA Science Inventory

Sediment toxicity is a widely recognized problem in many regions of the world. Frequently, however, the cause of toxicity is not known. The ability to identify the cause(s) of toxicity in sediments allows managers to determine sources of continuing contamination to support sele...

Reconstructing Contaminant Deposition in a San Francisco Bay Marina, California

PubMed Central

Love, Adam H.; Esser, Bradley K.; Hunt, James R.

2010-01-01

Two sediment cores were collected from a marina in the San Francisco Bay to characterize historical sediment contamination resulting from the direct discharge of industrial wastewater from Naval Air Station Alameda. Depth profiles of trace metals, petroleum hydrocarbons, and radionuclides were determined with a 12-cm spacing down to a depth of 120 cm. The chronology of sediment accumulation is established by depth profiles of sedimentary time markers in conjunction with information on site history. The traditional approach of determining sediment accumulation rates by measuring atmospheric 210Pb deposition was obscured by a larger source of 210Pb in the sediments from the decay of anthropogenic 226Ra, likely from luminescent paints used at this facility and released to the marina. The sedimentation rates inferred from the data indicate that the greatest amount of contamination by trace metals and petroleum hydrocarbons took place between 1940 and 1960. In addition, anthropogenic 226Ra activities are positively correlated with some of the contaminants in the sediments, allowing the wastewater discharged from the facility to be distinguished from baywide contamination. In locations such as this, where there is a complex history of contaminant deposition, a source-specific tracer may be the only feasible method of attributing historical contamination to a point source. PMID:20333267

Method 440.0 Determination of Carbon and Nitrogen in Sediments and Particulatesof Estuarine/Coastal Waters Using Elemental Analysis

EPA Science Inventory

Elemental analysis is used to determine particulate carbon (PC) and particulate nitrogen (PN) in estuarine and coastal waters and sediment. The method measures the total carbon and nitrogen irrespective of source (inorganic or organic).

Fingerprinting Sources of Suspended Sediment in a Canadian Agricultural Watershed Using the MixSIAR Bayesian Unmixing Model

NASA Astrophysics Data System (ADS)

Smith, J. P.; Owens, P. N.; Gaspar, L.; Lobb, D. A.; Petticrew, E. L.

2015-12-01

An understanding of sediment redistribution processes and the main sediment sources within a watershed is needed to support watershed management strategies. The fingerprinting technique is increasingly being recognized as a method for establishing the source of the sediment transported within watersheds. However, the different behaviour of the various fingerprinting properties has been recognized as a major limitation of the technique, and the uncertainty associated with tracer selection needs to be addressed. There are also questions associated with which modelling approach (frequentist or Bayesian) is the best to unmix complex environmental mixtures, such as river sediment. This study aims to compare and evaluate the differences between fingerprinting predictions provided by a Bayesian unmixing model (MixSIAR) using different groups of tracer properties for use in sediment source identification. We used fallout radionuclides (e.g. 137Cs) and geochemical elements (e.g. As) as conventional fingerprinting properties, and colour parameters as emerging properties; both alone and in combination. These fingerprinting properties are being used (i.e. Koiter et al., 2013; Barthod et al., 2015) to determine the proportional contributions of fine sediment in the South Tobacco Creek Watershed, an agricultural watershed located in Manitoba, Canada. We show that the unmixing model using a combination of fallout radionuclides and geochemical tracers gave similar results to the model based on colour parameters. Furthermore, we show that a model that combines all tracers (i.e. radionuclide/geochemical and colour) gave similar results, showing that sediment sources change from predominantly topsoil in the upper reaches of the watershed to channel bank and bedrock outcrop material in the lower reaches. Barthod LRM et al. (2015). Selecting color-based tracers and classifying sediment sources in the assessment of sediment dynamics using sediment source fingerprinting. J Environ Qual. Doi:10.2134/jeq2015.01.0043 Koiter AJ et al. (2013). Investigating the role of connectivity and scale in assessing the sources of sediment in an agricultural watershed in the Canadian prairies using sediment source fingerprinting. J Soils Sediments, 13, 1676-1691.

PAH Baselines for Amazonic Surficial Sediments: A Case of Study in Guajará Bay and Guamá River (Northern Brazil).

PubMed

Rodrigues, Camila Carneiro Dos Santos; Santos, Ewerton; Ramos, Brunalisa Silva; Damasceno, Flaviana Cardoso; Correa, José Augusto Martins

2018-06-01

The 16 priority PAH were determined in sediment samples from the insular zone of Guajará Bay and Guamá River (Southern Amazon River mouth). Low hydrocarbon levels were observed and naphthalene was the most representative PAH. The low molecular weight PAH represented 51% of the total PAH. Statistical analysis showed that the sampling sites are not significantly different. Source analysis by PAH ratios and principal component analysis revealed that PAH are primary from a few rate of fossil fuel combustion, mainly related to the local small community activity. All samples presented no biological stress or damage potencial according to the sediment quality guidelines. This study discuss baselines for PAH in surface sediments from Amazonic aquatic systems based on source determination by PAH ratios and principal component analysis, sediment quality guidelines and through comparison with previous studies data.

Occurrences, composition profiles and source identifications of polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in ship ballast sediments.

PubMed

Su, Peng-Hao; Lv, Bao-Yi; Tomy, Gregg T; Xu, Jin-Xiang; Tian, Wen; Hou, Chun-Yan; Yin, Fang; Li, Yi-Fan; Feng, Dao-Lun

2017-02-01

The aim of this study was to investigate the levels of persistent organic pollutants (POPs) including polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in ship ballast sediments. The ballast sediment samples were collected from six merchant ships docked in 2015 in Jiangyin City, China. Ballast sediments represent a potential vector for the transport of POPs and invasive species between marine environments. An attempt was also made to determine the sources of these compounds in the ballast sediment. The results indicated ballast sediments generally contain greater amounts of BDE-209 and comparable amounts of PAHs, PBDEs (exclusive of BDE-209) and PCBs compared to those in marine surface sediments. Based on the sediment quality guidelines, PAHs and PCBs in ballast sediments were estimated to have median or high potential of posing ecological risks, respectively, to marine life if ballast sediments were disposed without specific treatment. POPs in ballast sediments were derived from multiple sources with atmospheric deposition being an important origin. Ship activities including diesel exhaust and illegal oil sewage discharge were considerable contributors of certain individual POPs to ballast sediments. Our study is important because it represents the first report on levels, health risk assessment and source apportionments of POPs in ballast sediments and is a first step in the implementation of specific ballast sediment management measures. Copyright © 2016 Elsevier Ltd. All rights reserved.

Clay mineralogy, strontium and neodymium isotope ratios in the sediments of two High Arctic catchments (Svalbard)

NASA Astrophysics Data System (ADS)

Hindshaw, Ruth S.; Tosca, Nicholas J.; Piotrowski, Alexander M.; Tipper, Edward T.

2018-03-01

The identification of sediment sources to the ocean is a prerequisite to using marine sediment cores to extract information on past climate and ocean circulation. Sr and Nd isotopes are classical tools with which to trace source provenance. Despite considerable interest in the Arctic Ocean, the circum-Arctic source regions are poorly characterised in terms of their Sr and Nd isotopic compositions. In this study we present Sr and Nd isotope data from the Paleogene Central Basin sediments of Svalbard, including the first published data of stream suspended sediments from Svalbard. The stream suspended sediments exhibit considerable isotopic variation (ɛNd = -20.6 to -13.4; 87Sr / 86Sr = 0.73421 to 0.74704) which can be related to the depositional history of the sedimentary formations from which they are derived. In combination with analysis of the clay mineralogy of catchment rocks and sediments, we suggest that the Central Basin sedimentary rocks were derived from two sources. One source is Proterozoic sediments derived from Greenlandic basement rocks which are rich in illite and have high 87Sr / 86Sr and low ɛNd values. The second source is Carboniferous to Jurassic sediments derived from Siberian basalts which are rich in smectite and have low 87Sr / 86Sr and high ɛNd values. Due to a change in depositional conditions throughout the Paleogene (from deep sea to continental) the relative proportions of these two sources vary in the Central Basin formations. The modern stream suspended sediment isotopic composition is then controlled by modern processes, in particular glaciation, which determines the present-day exposure of the formations and therefore the relative contribution of each formation to the stream suspended sediment load. This study demonstrates that the Nd isotopic composition of stream suspended sediments exhibits seasonal variation, which likely mirrors longer-term hydrological changes, with implications for source provenance studies based on fixed end-members through time.

Determining the sources of suspended sediment in a Mediterranean groundwater-dominated river: the Na Borges basin (Mallorca, Spain).

NASA Astrophysics Data System (ADS)

Estrany, Joan; Martinez-Carreras, Nuria

2013-04-01

Tracers have been acknowledged as a useful tool to identify sediment sources, based upon a variety of techniques and chemical and physical sediment properties. Sediment fingerprinting supports the notion that changes in sedimentation rates are not just related to increased/reduced erosion and transport in the same areas, but also to the establishment of different pathways increasing sediment connectivity. The Na Borges is a Mediterranean lowland agricultural river basin (319 km2) where traditional soil and water conservation practices have been applied over millennia to provide effective protection of cultivated land. During the twentieth century, industrialisation and pressure from tourism activities have increased urbanised surfaces, which have impacts on the processes that control streamflow. Within this context, source material sampling was focused in Na Borges on obtaining representative samples from potential sediment sources (comprised topsoil; i.e., 0-2 cm) susceptible to mobilisation by water and subsequent routing to the river channel network, while those representing channel bank sources were collected from actively eroding channel margins and ditches. Samples of road dust and of solids from sewage treatment plants were also collected. During two hydrological years (2004-2006), representative suspended sediment samples for use in source fingerprinting studies were collected at four flow gauging stations and at eight secondary sampling points using time-integrating sampling samplers. Likewise, representative bed-channel sediment samples were obtained using the resuspension approach at eight sampling points in the main stem of the Na Borges River. These deposits represent the fine sediment temporarily stored in the bed-channel and were also used for tracing source contributions. A total of 102 individual time-integrated sediment samples, 40 bulk samples and 48 bed-sediment samples were collected. Upon return to the laboratory, source material samples were oven-dried at 40° C, disaggregated using a pestle and mortar, and dry sieved to

Polycyclic aromatic hydrocarbons (PAHs) in sediments from lake Lille Lungegårdsvannet in Bergen, western Norway; appraising pollution sources from the urban history.

PubMed

Andersson, Malin; Klug, Martin; Eggen, Ola Anfin; Ottesen, Rolf Tore

2014-02-01

This study aims to determine the temporal character and concentration variability of polycyclic aromatic hydrocarbon (PAH) during the last 5,400 years in urban lake sediments through a combination of dating and chemo-stratigraphical correlation. We investigate the chemical history of the city of Bergen and determine the effect of specific point sources, as well as diffuse sources, and also help assess the risk of remediation plans. By using several organic compounds, metals and cyanide, we demonstrate the more accurate timing of sedimentation. The PAH results display very low concentrations in pre-industrial times, followed by a general increase that is punctuated by a few significant concentration increases. These most probably correspond to urban fires, domestic heating, gaswork activity and most recently due to traffic pollution. At the same depth as a significant rise in concentration from background levels occurred, the high relative occurrence of low-molecular-weight PAH-compounds, such as naphthalene, were replaced by heavier compounds, thus indicating a permanent change in source. The general observation, using ratios, is that the sources have shifted from pre-industrial pure wood and coal combustion towards mixed and petrogenic sources in more recent times. The (14)C dating provides evidence that the sedimentation rate stayed more-or-less constant for 4,500 years (from 7200 to 2700 calibrated years before present (calyr BP)), before isostatic uplift isolated the water body and the sedimentation rate decreased or sediments were eroded. The sediment input increased again when habitation and industrial activities encroached on the lake. The (14)C dating does not provide consistent data in that period, possibly due to the fact that the lake has been used as a waste site throughout the history of Bergen city. Therefore, results from (14)C dating from anthropogenically influenced sediments should be used with caution. © 2013.

Sources of fine sediment stored in agricultural lowland streams, Midwest, USA

NASA Astrophysics Data System (ADS)

Lamba, Jasmeet; Thompson, A. M.; Karthikeyan, K. G.; Fitzpatrick, Faith A.

2015-05-01

Agricultural activities can accelerate the offsite transport of productive soil from fields leading to stream water quality degradation. Identification of the nature and relative contribution of different sources to fine-grained sediment (e.g., silts, clays) in streams is important to effectively focus agricultural best management practices in watersheds. Sediment fingerprinting techniques through the use of geochemical tracers are commonly used to differentiate relative contribution from various sources. Research was conducted in lowland streams in the Pleasant Valley watershed in South Central Wisconsin (USA) to identify provenance of fine-grained sediment deposits and evaluate the impact of land use on relative contributions from the following potential sources: cropland, pasture, woodland, and eroding stream banks. Results show that both agriculture (croplands and pastures) and eroding stream banks are primary sources to fine sediment deposits on the stream bed with contributions ranging from 19 to 100% and 0 to 81%, respectively. The increase in area under agricultural land use within a subwatershed results in greater contribution from agriculture (R2 = 0.846, p = 0.0034). Relative contributions from eroding stream banks increased with increasing area under grasslands and woodlands within a subwatershed (R2 = 0.814, p = 0.0055). Subwatersheds with greater mass of fine sediment deposited on the stream bed per unit area should be prioritized for best management practices. The conservation practices should be targeted to stream banks or croplands depending on the dominant source of fine sediment within a subwatershed. Site specific changes in relative contributions from different sources to fine-grained sediment in this watershed highlights the complexities involved in sediment transport dynamics. The nested sampling sites helped determine that sediment dynamics at the subwatershed scale need to be considered for application of targeted conservation techniques.

Sources of fine sediment stored in agricultural lowland streams, Midwest, USA

USGS Publications Warehouse

Lamba, Jasmeet; Thompson, Anita M.; Karthikeyan, K.G.; Fitzpatrick, Faith A.

2015-01-01

Agricultural activities can accelerate the offsite transport of productive soil from fields leading to stream water quality degradation. Identification of the nature and relative contribution of different sources to fine-grained sediment (e.g., silts, clays) in streams is important to effectively focus agricultural best management practices in watersheds. Sediment fingerprinting techniques through the use of geochemical tracers are commonly used to differentiate relative contribution from various sources. Research was conducted in lowland streams in the Pleasant Valley watershed in South Central Wisconsin (USA) to identify provenance of fine-grained sediment deposits and evaluate the impact of land use on relative contributions from the following potential sources: cropland, pasture, woodland, and eroding stream banks. Results show that both agriculture (croplands and pastures) and eroding stream banks are primary sources to fine sediment deposits on the stream bed with contributions ranging from 19 to 100% and 0 to 81%, respectively. The increase in area under agricultural land use within a subwatershed results in greater contribution from agriculture (R2 = 0.846, p = 0.0034). Relative contributions from eroding stream banks increased with increasing area under grasslands and woodlands within a subwatershed (R2 = 0.814, p = 0.0055). Subwatersheds with greater mass of fine sediment deposited on the stream bed per unit area should be prioritized for best management practices. The conservation practices should be targeted to stream banks or croplands depending on the dominant source of fine sediment within a subwatershed. Site specific changes in relative contributions from different sources to fine-grained sediment in this watershed highlights the complexities involved in sediment transport dynamics. The nested sampling sites helped determine that sediment dynamics at the subwatershed scale need to be considered for application of targeted conservation techniques.

Topographic filtering simulation model for sediment source apportionment

NASA Astrophysics Data System (ADS)

Cho, Se Jong; Wilcock, Peter; Hobbs, Benjamin

2018-05-01

We propose a Topographic Filtering simulation model (Topofilter) that can be used to identify those locations that are likely to contribute most of the sediment load delivered from a watershed. The reduced complexity model links spatially distributed estimates of annual soil erosion, high-resolution topography, and observed sediment loading to determine the distribution of sediment delivery ratio across a watershed. The model uses two simple two-parameter topographic transfer functions based on the distance and change in elevation from upland sources to the nearest stream channel and then down the stream network. The approach does not attempt to find a single best-calibrated solution of sediment delivery, but uses a model conditioning approach to develop a large number of possible solutions. For each model run, locations that contribute to 90% of the sediment loading are identified and those locations that appear in this set in most of the 10,000 model runs are identified as the sources that are most likely to contribute to most of the sediment delivered to the watershed outlet. Because the underlying model is quite simple and strongly anchored by reliable information on soil erosion, topography, and sediment load, we believe that the ensemble of simulation outputs provides a useful basis for identifying the dominant sediment sources in the watershed.

Distribution of trace elements in the coastal sea sediments of Maslinica Bay, Croatia

NASA Astrophysics Data System (ADS)

Mikulic, Nenad; Orescanin, Visnja; Elez, Loris; Pavicic, Ljiljana; Pezelj, Durdica; Lovrencic, Ivanka; Lulic, Stipe

2008-02-01

Spatial distributions of trace elements in the coastal sea sediments and water of Maslinica Bay (Southern Adriatic), Croatia and possible changes in marine flora and foraminifera communities due to pollution were investigated. Macro, micro and trace elements’ distributions in five granulometric fractions were determined for each sediment sample. Bulk sediment samples were also subjected to leaching tests. Elemental concentrations in sediments, sediment extracts and seawater were measured by source excited energy dispersive X-ray fluorescence (EDXRF). Concentrations of the elements Cr, Cu, Zn, and Pb in bulk sediment samples taken in the Maslinica Bay were from 2.1 to over six times enriched when compared with the background level determined for coarse grained carbonate sediments. A low degree of trace elements leaching determined for bulk sediments pointed to strong bonding of trace elements to sediment mineral phases. The analyses of marine flora pointed to higher eutrophication, which disturbs the balance between communities and natural habitats.

The Impacts of Episodic Storm and Flood Events on Carbon and Sediment Delivery to Gulf of Mexico Sediments

NASA Astrophysics Data System (ADS)

Schreiner, K. M.; Carlin, J. A.; Sayers, L.; Swenson, J.

2017-12-01

Marine sediments are an important long-term reservoir for both recently fixed organic carbon (OC) and ancient rock derived OC, much of which is delivered by rivers. The ratio between these two sources of OC in turn regulates atmospheric levels of oxygen and carbon dioxide over geologic time, making this riverine delivery of OC, primarily carried by sediments, an important flux in the global carbon cycle. However, while the overall magnitude of these fluxes are relatively well known, it remains to be determined the importance of episodic events, like storms and floods, in the flux of OC from terrestrial to marine environments. Here, we present data from a 34 cm core collected from the Gulf of Mexico at a mid-shelf distal depocenter for the Brazos River in 2015, during a strong El Nino when that area of the country was experiencing 100-year flood events and anomalously high river flow. Based on analysis of the radioactive isotope 7Be, approximately the top 7-8 cm of the sediment in this core was deposited during this flood event. Both bulk elemental (C, N, and stable carbon isotopes) and chemical biomarker (lignin-phenol) data has been combined to provide information of the origin and chemistry of the OC in this core both before and during flooding. C:N and d13C indicate a mixture of marine-sourced and terrestrially-sourced OC throughout the length of the core with very little variation between the flood layer and deeper sediments. However, lignin-phenol concentrations are higher in flood-deposited sediment, indicating that this sediment is likely terrestrially-sourced. Lignin-phenol indicators of OC degradation state (Acid:Aldehyde ratios) indicate that flood sediment is fresher and less degraded than deeper sediments. Taken together, these results indicate that 1. Bulk analyses are not enough to determine OC source and the importance of flood events in OC cycling and 2. Episodic events like floods could have an oversized impact on OC storage in marine sediments.

Sediment source detection by stable isotope analysis, carbon and nitrogen content and CSSI in a small river of the Swiss Plateau

NASA Astrophysics Data System (ADS)

SchindlerWildhaber, Yael; Alewell, Christine; Birkholz, Axel

2014-05-01

Suspended sediment (SS) and organic matter in rivers can harm the fauna by affecting health and fitness of free swimming fish and by causing siltation of the riverbed. The temporal and spatial dynamics of sediment, carbon (C) and nitrogen (N) during the brown trout spawning season in a small river of the Swiss Plateau were assessed and C isotopes as well as the C/N atomic ratio were used to distinguish autochthonous and allochthonous sources of organic matter in SS loads. The visual basic program IsoSource with 13Ctot and 15N as input isotopes was used to quantify the temporal and spatial sources of SS. We determined compound specific stable carbon isotopes (CSSI) in fatty acids of possible sediment source areas to the stream in addition and compared them to SS from selected high flow and low flow events. Organic matter concentrations in the infiltrated and suspended sediment were highest during low flow periods with small sediment loads and lowest during high flow periods with high sediment loads. Peak values in nitrate and dissolved organic C were measured during high flow and high rainfall, probably due to leaching from pasture and arable land. The organic matter was of allochthonous sources as indicated by the C/N atomic ratio and δ13Corg. Organic matter in SS increased from up- to downstream due to an increase in sediment delivery from pasture and arable land downstream of the river. While the major sources of SS are pasture and arable land during base flow conditions, SS from forest soils increased during heavy rain events and warmer winter periods most likely due to snow melt which triggered erosion. Preliminary results of CSSI analysis of sediment source areas and comparison to SS of selected events indicate that differences in d13C values of individual fatty acids are too small to differentiate unambiguously between sediment sources.

Quantifying the uncertainty of nonpoint source attribution in distributed water quality models: A Bayesian assessment of SWAT's sediment export predictions

NASA Astrophysics Data System (ADS)

Wellen, Christopher; Arhonditsis, George B.; Long, Tanya; Boyd, Duncan

2014-11-01

Spatially distributed nonpoint source watershed models are essential tools to estimate the magnitude and sources of diffuse pollution. However, little work has been undertaken to understand the sources and ramifications of the uncertainty involved in their use. In this study we conduct the first Bayesian uncertainty analysis of the water quality components of the SWAT model, one of the most commonly used distributed nonpoint source models. Working in Southern Ontario, we apply three Bayesian configurations for calibrating SWAT to Redhill Creek, an urban catchment, and Grindstone Creek, an agricultural one. We answer four interrelated questions: can SWAT determine suspended sediment sources with confidence when end of basin data is used for calibration? How does uncertainty propagate from the discharge submodel to the suspended sediment submodels? Do the estimated sediment sources vary when different calibration approaches are used? Can we combine the knowledge gained from different calibration approaches? We show that: (i) despite reasonable fit at the basin outlet, the simulated sediment sources are subject to uncertainty sufficient to undermine the typical approach of reliance on a single, best fit simulation; (ii) more than a third of the uncertainty of sediment load predictions may stem from the discharge submodel; (iii) estimated sediment sources do vary significantly across the three statistical configurations of model calibration despite end-of-basin predictions being virtually identical; and (iv) Bayesian model averaging is an approach that can synthesize predictions when a number of adequate distributed models make divergent source apportionments. We conclude with recommendations for future research to reduce the uncertainty encountered when using distributed nonpoint source models for source apportionment.

Use of stable isotopes of carbon and nitrogen to identify sources of organic matter to bed sediments of the Tualatin River, Oregon

USGS Publications Warehouse

Bonn, Bernadine A.; Rounds, Stewart A.

2010-01-01

The potential sources of organic matter to bed sediment of the Tualatin River in northwestern Oregon were investigated by comparing the isotopic fractionation of carbon and nitrogen and the carbon/nitrogen ratios of potential sources and bed sediments. Samples of bed sediment, suspended sediment, and seston, as well as potential source materials, such as soil, plant litter, duckweed, and wastewater treatment facility effluent particulate were collected in 1998-2000. Based on the isotopic data, terrestrial plants and soils were determined to be the most likely sources of organic material to Tualatin River bed sediments. The delta 13C fractionation matched well, and although the delta 15N and carbon/nitrogen ratio of fresh plant litter did not match those of bed sediments, the changes expected with decomposition would result in a good match. The fact that the isotopic composition of decomposed terrestrial plant material closely resembled that of soils and bed sediments supports this conclusion. Phytoplankton probably was not a major source of organic matter to bed sediments. Compared to the values for bed sediments, the delta 13C values and carbon/nitrogen ratios of phytoplankton were too low and the delta 15N values were too high. Decomposition would only exacerbate these differences. Although phytoplankton cannot be considered a major source of organic material to bed sediment, a few bed sediment samples in the lower reach of the river showed a small influence from phytoplankton as evidenced by lower delta 13C values than in other bed sediment samples. Isotopic data and carbon/nitrogen ratios for bed sediments generally were similar throughout the basin, supporting the idea of a widespread source such as terrestrial material. The delta 15N was slightly lower in tributaries and in the upper reaches of the river. Higher rates of sediment oxygen demand have been measured in the tributaries in previous studies and coupled with the isotopic data may indicate the presence of more labile organic matter in these areas. Results from this study indicate that strategies to improve oxygen conditions in the Tualatin River are likely to be more successful if they target sources of soil, leaf litter, and other terrestrially derived organic materials to the river rather than the instream growth of algae.

Carbon-13 natural abundance signatures of long-chain fatty acids to determinate sediment origin: A case study in northeast Austria

NASA Astrophysics Data System (ADS)

Mabit, Lionel; Gibbs, Max; Meusburger, Katrin; Toloza, Arsenio; Resch, Christian; Klik, Andreas; Swales, Andrew; Alewell, Christine

2016-04-01

- Several recently published information from scientific research have highlighted that compound-specific stable isotope (CSSI) signatures of fatty acids (FAs) based on the measurement of carbon-13 natural abundance signatures showed great promises to identify sediment origin. The authors have used this innovative isotopic approach to investigate the sources of sediment in a three hectares Austrian sub-watershed (i.e. Mistelbach). Through a previous study using the Cs-137 technique, Mabit et al. (Geoderma, 2009) reported a local maximum sedimentation rate reaching 20 to 50 t/ha/yr in the lowest part of this watershed. However, this study did not identify the sources. Subsequently, the deposited sediment at its outlet (i.e. the sediment mixture) and representative soil samples from the four main agricultural fields - expected to be the source soils - of the site were investigated. The bulk delta carbon-13 of the samples and two long-chain FAs (i.e. C22:0 and C24:0) allowed the best statistical discrimination. Using two different mixing models (i.e. IsoSource and CSSIAR v1.00) and the organic carbon content of the soil sources and sediment mixture, the contribution of each source has been established. Results suggested that the grassed waterway contributed to at least 50% of the sediment deposited at the watershed outlet. This study, that will require further validation, highlights that CSSI and Cs-137 techniques are complementary as fingerprints and tracers for establishing land sediment redistribution and could provide meaningful information for optimized decision-making by land managers.

Natural thorium isotopes in marine sediment core off Labuan port

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hafidz, B. Y.; Asnor, A. S.; Terence, R. C.

2014-02-12

Sediment core was collected from Labuan port and analyzed to determine the radioactivity of thorium (Th) isotopes. The objectives of this study are to determine the possible sources of Th isotopes at Labuan port and estimates the sedimentation rate based on {sup 228}Th/{sup 232}Th model. The results suggest the {sup 230}Th and {sup 232}Th might be originated from terrestrial sedimentary rock while {sup 228}Th originated by authigenic origin. High ratio value of {sup 230}Th/{sup 232}Th detected at the top surface sediment indicates the increasing of {sup 230}Th at the recent years which might be contributed from the anthropogenic sources. Themore » sedimentation rate of core sediment from Labuan Port was successfully estimated by using {sup 228}Th/{sup 232}Th model. The result show high sedimentation rate with 4.67 cm/year indicates rapid deposition occurred at this study area due to the high physical activity at the Labuan port. By assume the constant sedimentation rate at this area; we estimated the age of 142 cm core sediment obtained from Labuan port is 32 years started from 1981 to 2012. This chronology will be used in forthcoming research to investigate the historical profile of anthropogenic activities affecting the Labuan port.« less

A sediment budget from a glaciated catchment: reconciling subglacial and periglacial erosion on short timescales

NASA Astrophysics Data System (ADS)

Delaney, Ian; Gindraux, Saskia; Weidmann, Yvo; Bauder, Andreas

2017-04-01

Glaciated catchments are known to expel great amounts of sediment, particularly during periods of climatic perturbation. Sediment in these catchments either originates subglacially, where it is eroded by pressurized water below the glacier, or from periglacial areas, which are commonly comprised of easily erodible, unconsolidated material no longer buttressed and held in place by ice. To better forecast sediment dynamics and erosion rates in to the future, contributions of subglacial and periglacial sediment must be quantified, and the processes controlling erosion in these respective sources described. To determine the relative contributions of these sources, we examine the Griesgletscher catchment in the Swiss Alps. Its rather simplistic geometry, as well as, the presence of a proglacial reservoir that serves as a sediment trap, provides an unusually constrained environment to directly measure sediment sources and sinks in the catchment. Subtraction of three digital elevation models created from structure-from-motion and photogrammetric techniques over a one year period, from October 2015 to October 2016, were used to measured sediment flux from the proglacial area. Furthermore, comparison of bathymetries collected from the proglacial reservoir in fall of 2015 and 2016 determined total sediment flux from the entire catchment over this 10 km2time period. Data from a turbidity meter, installed below the reservoir outflow, suggest that negligible amounts of sediment leave the reservoir. Thus comparison of reservoir bathymetry and sediment fluxes from the proglacial area give estimates of the relative contribution of proglacial and subglacial sediment erosion to total catchment sedimentation. Analysis of this data suggest that while the proglacial area experiences a greater erosion rate, it is likely more sediment originates subglacially. As proglacial areas are expected to grow in area and partially stabilize, and glacial areas are predicted to shrink and possibly loose erosive capacity, these competing processes must be reconciled.

Polycyclic aromatic hydrocarbons in sediments from the Old Yellow River Estuary, China: occurrence, sources, characterization and correlation with the relocation history of the Yellow River.

PubMed

Yuan, Zijiao; Liu, Guijian; Wang, Ruwei; Da, Chunnian

2014-11-01

The levels of 16 USEPA priority PAHs were determined in surface sediments and one dated sediment core from the abandoned Old Yellow River Estuary, China. Total PAH concentrations in the surface sediments ranged from 100.4 to 197.3 ng g(-1) dry weight and the total toxic equivalent quantity (TEQ(carc)) values of the carcinogenic PAHs were very low. An evaluation of PAH sources based on diagnostic ratios and principal component analysis suggested that PAHs in the surface sediments mainly derived from combustion sources. The total PAH concentrations altered significantly with year of deposition and showed quite different patterns of change compared with other studies: it is hypothesized that the principal cause of these changes is the relocation of the course of the Yellow River to the sea in 1976 and 1996. Copyright © 2014 Elsevier Inc. All rights reserved.

Sediment tracing in the upper Hunter catchment using elemental and mineralogical compositions: Implications for catchment-scale suspended sediment (dis)connectivity and management

NASA Astrophysics Data System (ADS)

Fryirs, Kirstie; Gore, Damian

2013-07-01

River bed colmation layers clog the interstices of gravel-bed rivers, impeding the vertical exchange of water and nutrients that drives ecosystem function in the hyporheic zone. In catchments where fine-grained sediment supply has increased since human disturbance, understanding sediment provenance and the (dis)connectivity of supply allows practitioners to target sediment source problems and treat them within catchment management plans. Release of alluvial fine-grained sediment from channel bank erosion since European settlement has resulted in the formation of a colmation layer along the upper Hunter River at Muswellbrook, eastern Australia. X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD) are used to determine the elemental and mineralogical signatures of colmation layer and floodplain sediment sources across this 4480 km2 catchment. This sediment tracing technique is used to construct a picture of how suspended sediment supply and (dis)connectivity operates in this catchment. In this system, the primary source areas are subcatchments in which sediments are stored largely in partly confined floodplain pockets, but from which sediment supply is unimpeded and directly connected to the receiving reach. Subcatchments in which alluvial sediment storage is significant — and which contain large, laterally unconfined valleys — are essentially 'switched off' or disconnected from the receiving reach. This is because large sediment sinks act to trap fine-grained sediment before it reaches the receiving reach, forming a buffer along the sediment conveyor belt. Given the age structure of floodplains in the receiving reach, this pattern of source area contributions and (dis)connectivity must have occurred throughout the Holocene.

Using geochemical fingerprinting to track the dispersion of radioactive contamination along coastal catchments of the Fukushima Prefecture

NASA Astrophysics Data System (ADS)

Lepage, Hugo; Laceby, J. Patrick; Evrard, Olivier; Onda, Yuichi; Caroline, Chartin; Lefèvre, Irène; Bonté, Philippe; Ayrault, Sophie

2015-04-01

Several coastal catchments located in the vicinity of the Fukushima Dai-Ichi Power Plant were impacted contaminated fallout in March 2011. Following the accident, typhoons and snowmelt runoff events transfer radiocesium contamination through the coastal floodplains and ultimately to the Pacific Ocean. Therefore it is important to understand the location and relative contribution of different erosion sources in order to manage radiocesium transfer within these coastal catchments and the cumulative export of radiocesium to the Pacific Ocean. Here we present a sediment fingerprinting approach to determine the relative contributions of sediment from different soil types to sediment transported throughout two coastal riverine systems. The sediment fingerprinting technique presented utilizes differences in the elemental geochemistry of the distinct soil types to determine their relative contributions to sediment sampled in riverine systems. This research is important as it furthers our understanding of dominant erosion sources in the region which will help with ongoing decontamination and monitoring efforts pertaining to the management of fallout radiocesium migration in the region.

Identifying the source of petroleum pollution in sediment cores of southwest of the Caspian Sea using chemical fingerprinting of aliphatic and alicyclic hydrocarbons.

PubMed

Shirneshan, Golshan; Bakhtiari, Alireza Riyahi; Memariani, Mahmoud

2017-02-15

In this study, the concentration and sources of aliphatic and petroleum markers were investigated in 105 samples of Anzali, Rezvanshahr and Astara cores from the southwest of Caspian Sea. Petroleum importation was diagnosed as a main source in most depths of cores by the results of unresolved complex mixture, carbon preference index and hopanes and steranes. From the chemical diagnostic parameters, petroleum inputs in sediment of cores were determined to be different during years and the sources of hydrocarbons in some sections differed than Anzali and Turkmenistan and Azerbaijan oils. Diagenic ratios in most sediments of upper and middle sections in Astara core were determined to be highly similar to those of Azerbaijan oil, while the presence of Turkmenistan and Anzali oils were detected in a few sections of Anzali and Rezvanshahr cores and only five layers of downer section in Anzali core, respectively. Copyright © 2016. Published by Elsevier Ltd.

Determining sources of deep-sea mud by organic matter signatures in the Sunda trench and Aceh basin off Sumatra

NASA Astrophysics Data System (ADS)

Omura, Akiko; Ikehara, Ken; Arai, Kohsaku; Udrekh

2017-12-01

The content, optically determined properties, and stable isotope composition of organic carbon in fine-grained sediment cores were analyzed to investigate the origins of deep-sea sediments deposited in the Aceh forearc basin and on the Sunda trench floor off Sumatra from the late Pleistocene to the Holocene. In the Aceh basin, the depositional frequency of turbidite mud decreased as sea level rose during the deglaciation. The terrigenous organic carbon content was high at the end of the last glacial period, whereas during the deglaciation most of the organic carbon was of marine origin. In the Sunda trench, the Holocene turbidites consisted of remobilized slope sediments from two different sources: sediments derived from the old Bengal/Nicobar fan included thermally matured organic fragments, whereas those derived from the trench slope contained little terrigenous organic carbon.

Sediment source fingerprinting to quantify fine sediment sources in forested catchments, Chile.

NASA Astrophysics Data System (ADS)

Schuller, P.; Walling, D. E.; Iroume, A.; Castillo, A.; Quilodran, C.

2012-04-01

A study to improve the understanding of the primary sediment sources and transfer pathways in catchments disturbed following forest plantation harvesting is being undertaken in South-Central Chile. The study focuses on two sets of paired experimental catchments (treatment and control), located about 400 km apart, with similar soil type but contrasting mean annual rainfall: Nacimiento (1,200 mm year-1) and Los Ulmos (2,500 mm year-1). Sediment source fingerprinting techniques are being used to document the primary fine sediment sources. In each catchment, three potential sediment sources were defined: clearcut slopes (Z1), forest roads (Z2) and the stream channel (Z3). In each catchment, multiple representative composite samples of the different potential source materials were collected before harvest operations from the upper 1 cm layer in Z1, Z2, and from the channel bank and bed for Z3. A time-integrating trap sampler installed in the discharge monitoring station constructed at the outlet of each catchment has been used to collect samples of the suspended sediment and these have been supplemented by sediment collected from the weir pools. Total suspended sediment load is been quantified in the monitoring stations using discharge records and integrated water sampling. Caesium-137 (137Cs), excess lead-210 (210Pbex) and other sediment properties are being used as fingerprints. After air-drying, oven-drying at 40°C and disaggregation, both the source material samples and the sediment samples collected in the discharge monitoring stations were sieved through a 63-μm sieve and the <63-μm fractions were used for subsequent analyses. For radionuclide assay, the samples were sealed in Petri dishes and after 4 weeks the mass activity density (activity concentration) of 137Cs and 210Pbex was determined by gamma analysis, using an ORTEC extended range Ge detector of 53% relative efficiency. The 137Cs and 210Pbex activity and organic carbon (Corg) concentration associated with potential source materials and the target sediment show that the two radionuclides used in combination with the Corg property provide effective source fingerprints. Additional work using a mixing model taking account of particle size effects is required to establish the relative contributions of the three sources to the fine sediment loads of the study catchments. This research is supported by the Chilean Government through FONDECYT Project 1090574 and by the IAEA through CRP D1.20.11 (Contract CHI-15531 and Technical Contract 15478) and the RLA 05/051 Project.

Improved estimation of sediment source contributions by concentration-dependent Bayesian isotopic mixing model

NASA Astrophysics Data System (ADS)

Ram Upadhayay, Hari; Bodé, Samuel; Griepentrog, Marco; Bajracharya, Roshan Man; Blake, Will; Cornelis, Wim; Boeckx, Pascal

2017-04-01

The implementation of compound-specific stable isotope (CSSI) analyses of biotracers (e.g. fatty acids, FAs) as constraints on sediment-source contributions has become increasingly relevant to understand the origin of sediments in catchments. The CSSI fingerprinting of sediment utilizes CSSI signature of biotracer as input in an isotopic mixing model (IMM) to apportion source soil contributions. So far source studies relied on the linear mixing assumptions of CSSI signature of sources to the sediment without accounting for potential effects of source biotracer concentration. Here we evaluated the effect of FAs concentration in sources on the accuracy of source contribution estimations in artificial soil mixture of three well-separated land use sources. Soil samples from land use sources were mixed to create three groups of artificial mixture with known source contributions. Sources and artificial mixture were analysed for δ13C of FAs using gas chromatography-combustion-isotope ratio mass spectrometry. The source contributions to the mixture were estimated using with and without concentration-dependent MixSIAR, a Bayesian isotopic mixing model. The concentration-dependent MixSIAR provided the closest estimates to the known artificial mixture source contributions (mean absolute error, MAE = 10.9%, and standard error, SE = 1.4%). In contrast, the concentration-independent MixSIAR with post mixing correction of tracer proportions based on aggregated concentration of FAs of sources biased the source contributions (MAE = 22.0%, SE = 3.4%). This study highlights the importance of accounting the potential effect of a source FA concentration for isotopic mixing in sediments that adds realisms to mixing model and allows more accurate estimates of contributions of sources to the mixture. The potential influence of FA concentration on CSSI signature of sediments is an important underlying factor that determines whether the isotopic signature of a given source is observable even after equilibrium. Therefore inclusion of FA concentrations of the sources in the IMM formulation is standard procedure for accurate estimation of source contributions. The post model correction approach that dominates the CSSI fingerprinting causes bias, especially if the FAs concentration of sources differs substantially.

Determination of adsorption and desorption of DNA molecules on freshwater and marine sediments.

PubMed

Xue, J; Feng, Y

2018-06-01

Free DNA and its adsorption by sediment in the aquatic environment lead to ambiguity in the identification of recent faecal pollution sources. The goal of this study was to understand the mechanisms of DNA adsorption and desorption on aquatic sediment under various conditions using quantitative polymerase chain reaction (qPCR). Both raw sewage (RS) DNA and purified PCR product (PPP) were used in adsorption and desorption experiments; autoclaved freshwater and marine sediments served as sorbents. Thirty-six hours were needed for adsorption to reach equilibrium. More DNA was adsorbed on both sediments in stream water than in 5 mmol l -1 NaCl and DNA adsorption increased in the presence of Ca 2+ and Mg 2+ . Successive desorption experiments showed that between 5% and 22% of adsorbed DNA was desorbed. Organic matter and clay played a significant role in determining the DNA adsorption capacity on sediment. The data suggest the presence of multilayer adsorption. DNA molecules on sediments were mostly adsorbed through ligand binding rather than electrostatic binding. Quantitative polymerase chain reaction assays provide a better way to investigate the DNA adsorption and desorption mechanisms by sediment. DNA desorption can potentially complicate the outcomes of microbial source tracking studies. © 2018 The Society for Applied Microbiology.

Tracing catchment fine sediment sources using the new SIFT (SedIment Fingerprinting Tool) open source software.

PubMed

Pulley, S; Collins, A L

2018-09-01

The mitigation of diffuse sediment pollution requires reliable provenance information so that measures can be targeted. Sediment source fingerprinting represents one approach for supporting these needs, but recent methodological developments have resulted in an increasing complexity of data processing methods rendering the approach less accessible to non-specialists. A comprehensive new software programme (SIFT; SedIment Fingerprinting Tool) has therefore been developed which guides the user through critical data analysis decisions and automates all calculations. Multiple source group configurations and composite fingerprints are identified and tested using multiple methods of uncertainty analysis. This aims to explore the sediment provenance information provided by the tracers more comprehensively than a single model, and allows for model configurations with high uncertainties to be rejected. This paper provides an overview of its application to an agricultural catchment in the UK to determine if the approach used can provide a reduction in uncertainty and increase in precision. Five source group classifications were used; three formed using a k-means cluster analysis containing 2, 3 and 4 clusters, and two a-priori groups based upon catchment geology. Three different composite fingerprints were used for each classification and bi-plots, range tests, tracer variability ratios and virtual mixtures tested the reliability of each model configuration. Some model configurations performed poorly when apportioning the composition of virtual mixtures, and different model configurations could produce different sediment provenance results despite using composite fingerprints able to discriminate robustly between the source groups. Despite this uncertainty, dominant sediment sources were identified, and those in close proximity to each sediment sampling location were found to be of greatest importance. This new software, by integrating recent methodological developments in tracer data processing, guides users through key steps. Critically, by applying multiple model configurations and uncertainty assessment, it delivers more robust solutions for informing catchment management of the sediment problem than many previously used approaches. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Distribution and origins of n-alkanes, hopanes, and steranes in rivers and marine sediments from Southwest Caspian coast, Iran: implications for identifying petroleum hydrocarbon inputs.

PubMed

Shirneshan, Golshan; Bakhtiari, Alireza Riyahi; Memariani, Mahmoud

2016-09-01

The occurrence of n-alkanes and biomarkers (hopane and sterane) in surface sediments from Southwestern coasts of Caspian Sea and 28 rivers arriving to this lake, determined with a gas chromatography-mass spectrometry method, was used to assess the impacts of anthropogenic activities in the studied area. The concentrations of total n-alkanes (Σ21 n-alkane) in costal and riverine sediments varied from 249.2 to 3899.5 and 56 to 1622.4 μg g(-1), respectively. An evaluation of the source diagnostic indices indicated that petroleum related sources (petrogenic) were mainly contributed to n-alkanes in costal and most riverine sediments. Only the hydrocarbons in sediment of 3 rivers were found to be mainly of biogenic origin. Principal component analysis using hopane diagnostic ratios in costal and riverine sediments, and Anzali, Turkmenistan, and Azerbaijan oils were used to identify the sources of hydrocarbons in sediments. It was indicated that the anthropogenic contributions in most of the costal sediment samples are dominated with inputs of oil spills from Turkmenistan and Azerbaijan countries.

The impact of catchment source group classification on the accuracy of sediment fingerprinting outputs.

PubMed

Pulley, Simon; Foster, Ian; Collins, Adrian L

2017-06-01

The objective classification of sediment source groups is at present an under-investigated aspect of source tracing studies, which has the potential to statistically improve discrimination between sediment sources and reduce uncertainty. This paper investigates this potential using three different source group classification schemes. The first classification scheme was simple surface and subsurface groupings (Scheme 1). The tracer signatures were then used in a two-step cluster analysis to identify the sediment source groupings naturally defined by the tracer signatures (Scheme 2). The cluster source groups were then modified by splitting each one into a surface and subsurface component to suit catchment management goals (Scheme 3). The schemes were tested using artificial mixtures of sediment source samples. Controlled corruptions were made to some of the mixtures to mimic the potential causes of tracer non-conservatism present when using tracers in natural fluvial environments. It was determined how accurately the known proportions of sediment sources in the mixtures were identified after unmixing modelling using the three classification schemes. The cluster analysis derived source groups (2) significantly increased tracer variability ratios (inter-/intra-source group variability) (up to 2122%, median 194%) compared to the surface and subsurface groupings (1). As a result, the composition of the artificial mixtures was identified an average of 9.8% more accurately on the 0-100% contribution scale. It was found that the cluster groups could be reclassified into a surface and subsurface component (3) with no significant increase in composite uncertainty (a 0.1% increase over Scheme 2). The far smaller effects of simulated tracer non-conservatism for the cluster analysis based schemes (2 and 3) was primarily attributed to the increased inter-group variability producing a far larger sediment source signal that the non-conservatism noise (1). Modified cluster analysis based classification methods have the potential to reduce composite uncertainty significantly in future source tracing studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sediment geochemistry of Corte Madera Marsh, San Francisco Bay, California: have local inputs changed, 1830-2010?

USGS Publications Warehouse

Takesue, Renee K.; Jaffe, Bruce E.

2013-01-01

Large perturbations since the mid-1800s to the supply and source of sediment entering San Francisco Bay have disturbed natural processes for more than 150 years. Only recently have sediment inputs through the Sacramento-San Joaquin Delta (the Delta) decreased to what might be considered pre-disturbance levels. Declining sediment inputs to San Francisco Bay raise concern about continued tidal marsh accretion, particularly if sea level rise accelerates in the future. The aim of this study is to explore whether the relative amount of local-watershed sediment accumulating in a tidal marsh has changed as sediment supply from the Sacramento-San Joaquin Rivers has decreased. To address this question, sediment geochemical indicators, or signatures, in the fine fraction (silt and clay) of Sacramento River, San Joaquin River, San Francisco Bay, and Corte Madera Creek sediment were identified and applied in sediment recovered from Corte Madera Marsh, one of the few remaining natural marshes in San Francisco Bay. Total major, minor, trace, and rare earth element (REE) contents of fine sediment were determined by inductively coupled plasma mass and atomic emission spectroscopy. Fine sediment from potential source areas had the following geochemical signatures: Sacramento River sediment downstream of the confluence of the American River was characterized by enrichments in chromium, zirconium, and heavy REE; San Joaquin River sediment at Vernalis and Lathrop was characterized by enrichments in thorium and total REE content; Corte Madera Creek sediment had elevated nickel contents; and the composition of San Francisco Bay mud proximal to Corte Madera Marsh was intermediate between these sources. Most sediment geochemical signatures were relatively invariant for more than 150 years, suggesting that the composition of fine sediment in Corte Madera Marsh is not very sensitive to changes in the magnitude, timing, or source of sediment entering San Francisco Bay through the Delta. Nor does there appear to be a ubiquitous increase in the proportion of fine sediment from Corte Madera watershed accumulating in the marsh during the last 20 years when sediment inflows through the Delta have decreased to pre-disturbance levels. We conclude that a large, well-mixed reservoir, such as the transportable fine sediment pool in San Francisco Bay, is the primary source of sediment to Corte Madera Marsh, and this source buffers the marsh against changes in sediment supply from the Delta and local watersheds. This study also found that Corte Madera Marsh sediment between about 10-30 centimeters depth is highly contaminated with lead, likely a legacy of lead smelter operations near Carquinez Strait and leaded gasoline use.

Sediment management alternatives for the Biloxi ports.

DOT National Transportation Integrated Search

2010-02-01

The objective of this project is to determine the source of sedimentation in the Ports of Biloxi and provide engineered solutions which will reduce : or eliminate the need for dredging within the ports. : The Commercial Docking Facility, Small Craft ...

Transport and sources of sediment in the Missouri River between Garrison Dam and the headwaters of Lake Oahe, North Dakota, May 1988 through April 1991

USGS Publications Warehouse

Berkas, Wayne R.

1995-01-01

Sediment data were collected on and along the Missouri River downstream from Garrison Dam during May 1988, May 1989, and April 1991 to characterize sediment transport in the river. Specific study objectives were to (1) identify erosional and depositional reaches during two steady-state low-flow periods and one steady-state high-flow period; (2) determine if the reaches are consistently eroding or depositing, regardless of streamflow; and (3) determine the sources of suspended sediment in the river. Erosional and depositional reaches differed between the two low-flow periods, indicating that slight changes in the channel configuration between the two periods caused changes in erosional and depositional patterns. Erosional and depositional reaches also differed between the low-flow periods and the high-flow period, indicating that channel changes and increased streamflow velocities affect erosional and depositional reaches. The significant sources of suspended sediment in the Missouri River are the riverbed and riverbanks. The riverbed contributes to the silt and sand load in the river, and the riverbanks contribute to the clay, silt, and sand load. The contribution from tributaries to the suspendedsediment load in the Missouri River usually is small. Occasionally, during low-flow periods on the Missouri River, the Knife River can contribute significantly to the suspended-sediment load in the Missouri River.

Enrichment and geochemical mobility of heavy metals in bottom sediment of the Hoedong reservoir, Korea and their source apportionment.

PubMed

Lee, Pyeong-Koo; Kang, Min-Ju; Yu, Soonyoung; Ko, Kyung-Seok; Ha, Kyoochul; Shin, Seong-Cheon; Park, Jung Han

2017-10-01

Physicochemical characteristics of bottom sediment in the Hoedong reservoir were studied to evaluate the effectiveness of the reservoir as traps for trace metals. Roadside soil, stream sediment and background soil were also studied for comparison. Sequential extractions were carried out, and lead isotopic compositions of each extraction were determined to apportion Pb sources. Besides, particle size distribution of roadside soil, and metal concentrations and Pb isotopes of each size group were determined to characterize metal contamination. In result, Zn and Cu were enriched in sediment through roadside soil. The data on metal partitioning implied that Zn posed potential hazards for water quality. Meanwhile, the noticeable reduction of the 206 Pb/ 207 Pb isotopic ratio in the acid-soluble fraction in the size group 200 μm - 2 mm of national roadside soil indicated that this size group was highly contaminated by automotive emission with precipitation of acid-soluble secondary minerals during evaporation. Based on the Pb isotopic ratios, the dry deposition of Asian dust (AD) and non-Asian dust (NAD) affected roadside soil, while the effects of AD and NAD on bottom sediment appeared to be low given the low metal concentrations in sediment. Metal concentrations and Pb isotopic compositions indicated that sediments were a mixture of background and roadside soil. Source apportionment calculations showed that the average proportion of traffic Pb in bottom and stream sediments was respectively 34 and 31% in non-residual fractions, and 26 and 28% in residual fraction. The residual fraction of sediments appeared to be as contaminated as the non-residual fractions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Source and Fate of Sediments in the Bahia de Anasco, Puerto Rico

NASA Astrophysics Data System (ADS)

Webb, R. M.

2005-12-01

Sediments and wastewater mix in the insular marine waters of the Bah'{i}a de Añasco near Mayag{u}ez, Puerto Rico. Trace metal concentrations in fine sediments deposited in the bay were measured to assess potential impact of the ocean outfall on the biota and habitats that include coral reefs. A Q-mode factor analysis of elemental compositions identified three sediment sources and their relative proportions in 51 core and surficial samples collected from the bay and within the coral reefs: (1) sediments discharged by the R'{i}o Grande de Añasco; (2) calcareous skeletal remains; and (3) sediments discharged by the R'{i}o Guanajibo. The nickel and chromium derived from laterite deposits provide a unique fingerprint for sediments discharged from the R'{i}o Guanajibo. Naturally occurring concentrations of these elements exceed Probable Effect Limits (PEL's: 42 mg/kg for nickel and 160 mg/kg for chromium) in sediments deposited near the river mouth. The detection of mercury at 1 mg/kg in one sample from a core recovered near the wastewater outfall was the only indication of a possible outfall source in the data set. The temporal and spatial variations in source fractions proved useful in determining relative frequencies of historic floods and steady-state circulation patterns off the west coast of Puerto Rico.

Sources, Transport, and Storage of Sediment at Selected Sites in the Chesapeake Bay Watershed

USGS Publications Warehouse

Gellis, Allen C.; Hupp, Cliff R.; Pavich, Milan J.; Landwehr, Jurate M.; Banks, William S.L.; Hubbard, Bernard E.; Langland, Michael J.; Ritchie, Jerry C.; Reuter, Joanna M.

2009-01-01

The Chesapeake Bay Watershed covers 165,800 square kilometers and is supplied with water and sediment from five major physiographic provinces: Appalachian Plateau, Blue Ridge, Coastal Plain, Piedmont, and the Valley and Ridge. Suspended-sediment loads measured in the Chesapeake Bay Watershed showed that the Piedmont Physiographic Province has the highest rates of modern (20th Century) sediment yields, measured at U.S. Geological Survey streamflow-gaging stations, and the lowest rates of background or geologic rates of erosion (~10,000 years) measured with in situ beryllium-10. In the agricultural and urbanizing Little Conestoga Creek Watershed, a Piedmont watershed, sources of sediment using the 'sediment-fingerprinting' approach showed that streambanks were the most important source (63 percent), followed by cropland (37 percent). Cesium-137 inventories, which quantify erosion rates over a 40-year period, showed average cropland erosion of 19.39 megagrams per hectare per year in the Little Conestoga Creek Watershed. If this erosion rate is extrapolated to the 13 percent of the watershed that is in cropland, then cropland could contribute almost four times the measured suspended-sediment load transported out of the watershed (27,600 megagrams per hectare per year), indicating that much of the eroded sediment is being deposited in channel and upland storage. The Piedmont has had centuries of land-use change, from forest to agriculture, to suburban and urban areas, and in some areas, back to forest. These land-use changes mobilized a large percentage of sediment that was deposited in upland and channel storage, and behind thousands of mill dams. The effects of these land-use changes on erosion and sediment transport are still being observed today as stored sediment in streambanks is a source of sediment. Cropland is also an important source of sediment. The Coastal Plain Physiographic Province has had the lowest sediment yields in the 20th Century and with sandy soils, contributes little fine-grained sediment. In the agricultural Pocomoke River Watershed, a Coastal Plain watershed, cesium-137 mass-balance results indicate that erosion and deposition are both occurring on cropland fields. Sources of sediment using the sediment-fingerprinting approach for the Pocomoke River were distributed as follows: cropland (46 percent), ditch beds (34 percent), ditch banks and streambanks (7 percent), and forest (13 percent). Cropland was a source of sediment for the two largest peak flow events, which occurred during harvesting when the ground may have been bare. The Pocomoke River Watershed is heavily ditched and channelized, conditions that are favorable for ditch bed and bank erosion. In the mixed land use (forested, agricultural, and urbanizing) Mattawoman Creek Watershed, a Coastal Plain watershed, sources of sediment using the sediment-fingerprinting approach were distributed as follows: streambanks (30 percent), forest (29 percent), construction (25 percent), and cropland (17 percent). Mattawoman Creek Watershed drains a rapidly developing region with 182 hectares (approximately 1.26 percent of the watershed) under construction. Sediment from construction sites was also determined as a source of sediment in the Mattawoman Creek Watershed. The sediment-fingerprinting source results for the three watersheds analyzed, show that in all watersheds, both the stream corridor and agriculture were significant sources of sediment. Forest as a source of sediment in the Mattawoman Creek Watershed may indicate that these forests are being disturbed and forest soils are eroding. Bare ground can be an important sediment source. Spatial analysis of bare ground in the Little Conestoga Creek Watershed using satellite imagery between 2000 and 2005 showed that the majority of bare ground was classified as pasture. Bare ground was correlated to the growing season with the highest percentages occurring in the early spring (April, 34 percent) and a

Source discrimination of heavy metals in sediment and water of To Lich River in Hanoi City using multivariate statistical approaches.

PubMed

Thuong, Nguyen Thi; Yoneda, Minoru; Ikegami, Maiko; Takakura, Masato

2013-10-01

The concentrations of Mn, Fe, Ni, Cr, Cu, Pb, Zn, As, and Cd were determined to evaluate the level of contamination of To Lich River in Hanoi City. All metal concentrations in 0-10-cm water samples, except Mn, were lower than the maximum permitted concentration for irrigation water standard. Meanwhile, concentrations of As, Cd, and Zn in 0-30-cm sediments were likely to have adverse effects on agriculture and aquatic life. Sediment pollution assessment was undertaken using enrichment factor and geoaccumulation index (I geo). The I geo results indicated that the sediment was not polluted with Cr, Mn, Fe, and Ni, and the pollution level increased in the order of Cu < Pb < Zn < As < Cd. Meanwhile, significant enrichment was shown for Cd, As, Zn, and Pb. Cluster and principal component analyses suggest that As and Mn in sediment were derived from both lithogenic and anthropogenic sources, while Cu, Pb, Zn, Cr, Cd, and Ni originated from anthropogenic sources such as vehicular fumes for Pb and metallic discharge from industrial sources and fertilizer application for other metals.

Evaluating the provenance of fine sediment in degraded Freshwater Pearl Mussel habitats.

NASA Astrophysics Data System (ADS)

Blake, Will; Haley, Steve; Goddard, Rupert; Stone, Peter; Broadhead, Kat

2015-04-01

Freshwater Pearl Mussels (FWPM), Margaritifera margaritifera, are among the most critically threatened freshwater bivalves worldwide. In addition to their important roles in particle processing, nutrient release, and sediment mixing, they also serve as an ideal target species for evaluation of aquatic ecosystem functioning especially in the context of their symbiotic relationship with Atlantic salmon Salmo salar and brown or sea trout Salmo trutta. Poor water quality, particularly eutrophication, and siltation are considered major contributory factors in the decline of the species hence management of diffuse water pollution from agriculture (DWPA) is a key priority in catchments that host FWPM habitats. Against this background, this study adopted a combined monitoring, surveying and sediment fingerprinting approach to determine the principal sources of fine sediment impacting FWPM habitats in the River Clun, a Special area of Conservation (SAC) for FWPMs in central western UK. Potential sediment production hotspot areas in the ca 200 km2 catchment area upstream of FWPM habitats were initially evaluated using the SCIMAP risk mapping tool. Suspended sediment monitoring was undertaken on the main stem channel where FWPM habitats are located and wet weather catchment walkover surveys undertaken along the upstream river and stream network. Within this monitoring framework, sediment fingerprinting was undertaken at two levels. The first level aimed to link primary catchment sources (cultivated and uncultivated soil, channel bank erosion, and material transported via roads and tracks) to suspended sediment output from each main tributary upstream of the FWPM beds. The second level linked silt in the FWMP beds to the main tributaries, as integrated source end-members, with the inclusion of main channel bank erosion, a notable feature of walkover surveys as an additional source. Geochemical fingerprints, determined by XRF spectroscopy, were dominated by conservative mineral-bound elements and results indicated the importance of mainstem channel bank erosion as a sediment source to the FWMP beds, in line with catchment walkover observations. In addition, broad subcatchment discrimination and subsequent sediment apportionment showed agreement with SCIMAP risk analysis for more intensively farmed areas. Fingerprinting results also suggested, however, an unexpected contribution from upland grazed areas, categorised as lower risk by SCIMAP. Detailed evaluation of primary sources in these areas was undertaken to evaluate this discrepancy and test the hypothesised importance of channel bank erosion at the subcatchment scale. The results highlight the benefits of adopting a combined monitoring, modelling and tracing approach to support targeted management of fine sediment problems. .

A catchment-integrated approach to determine the importance of secondary sources of contaminated sediment

NASA Astrophysics Data System (ADS)

Andres Lopez-Tarazon, Jose; Byrne, Patrick; Mullan, Donal; Smith, Hugh

2015-04-01

Water pollution has been identified as one of the most important environmental challenges of the early 21st Century. The Water Framework Directive (WFD) (2008/105/EC) explicitly recognises the risk to water resources posed by sediment-associated contaminants in European river basins. The potential impacts on water supply and the biodiversity of aquatic ecosystems from sediment and associated contaminants may be further exacerbated by climate change pressures on water resources, as highlighted in the 2009 EU White Paper "Adapting to climate change: Towards a European framework for action" (SEC(2009) 386, 387, 388). Despite these concerns, the role of floodplains and other storage areas as secondary sources of contaminated sediment (i.e. metals) in river basins affected by historic industrial or mining pollution has been largely overlooked. Thereby, besides the sediment which is transported by the river, secondary sources of contaminants represent a credible threat to achieving EU water quality targets set by the WFD. This project addresses this issue by developing a catchment-based approach looking at metal geochemistry from source to sink (i.e., from sediment generation at slopes, passing through sediment transported by the river system, to sediment deposition at the storage areas to the outlet) and develop a geochemical model to predict the chemical aspects of metals transport and transformation. This approach will allow us to quantify (i) the sediment fluxes and associated contaminants flowing through the river, (ii) the storage areas contributions to downstream contaminated sediment fluxes, (ii) the timescales for the storage and removal of contaminated sediment in the sinks, and (iv) the transformation and bioavailability of the pollutants (i.e. metals) along the basin. Both physical and chemical aspects of metal transport will be considered by looking at metal geochemistry, mobility and bioavailability, hence producing information on chemical metal transport and transformation from source to sink. Different metal species rather than bulk metals will be investigated providing information on potential metal mobility (and what environmental processes might force mobility) and bioavailability. Biological work (i.e. macroinvertebrates samplings, PCA and CCA techniques) will also carried out to apply contaminant-ecosystem models and determine the affectation of pollutants over the biology/ecology. Finally, catchment-based hydro-sedimentological models will be applied to study how different global-change scenarios could alter sediment (and hence) metals transport. This way, present work will generate better understanding of the environmental risk derived from sediment mobility in contaminated systems, a critical information which will provide river basin managers with the means to assess the potential impact of the secondary sources of water pollution in European rivers.

Advance and application of the stratigraphic simulation model 2D- SedFlux: From tank experiment to geological scale simulation

NASA Astrophysics Data System (ADS)

Kubo, Yu'suke; Syvitski, James P. M.; Hutton, Eric W. H.; Paola, Chris

2005-07-01

The stratigraphic simulation model 2D- SedFlux is further developed and applied to a turbidite experiment in a subsiding minibasin. The new module dynamically simulates evolving hyperpycnal flows and their interaction with the basin bed. Comparison between the numerical results and the experimental results verifies the ability of 2D- SedFlux to predict the distribution of the sediments and the possible feedback from subsidence. The model was subsequently applied to geological-scale minibasins such as are located in the Gulf of Mexico. Distance from the sediment source is determined to be more influential than the sediment entrapment in upstream minibasin. The results suggest that efficiency of sediment entrapment by a basin was not influenced by the distance from the sediment source.

Influence of electron donors and copper concentration on geochemical and mineralogical processes under conditions of biological sulphate reduction

NASA Astrophysics Data System (ADS)

Wolicka, Dorota; Borkowski, Andrzej

2014-03-01

Sulphidogenous microorganism communities were isolated from soil polluted by crude oil. The study was focused on determining the influence of 1) copper (II) concentration on the activity of selected microorganism communities and 2) the applied electron donor on the course and evolution of mineral-forming processes under conditions favouring growth of sulphate-reducing bacteria (SRB). The influence of copper concentration on the activity of selected microorganism communities and the type of mineral phases formed was determined during experiments in which copper (II) chloride at concentrations of 0.1, 0.2, 0.5 and 0.7 g/L was added to SRB cultures. The experiments were performed in two variants: with ethanol (4 g/L) or lactate (4 g/L) as the sole carbon source. In order to determine the taxonomic composition of the selected microorganism communities, the 16S rRNA method was used. Results of this analysis confirmed the presence of Desulfovibrio, Desulfohalobium, Desulfotalea, Thermotoga, Solibacter, Gramella, Anaeromyxobacter and Myxococcus sp. in the stationary cultures. The post-culture sediments contained covelline (CuS) and digenite (Cu9S5 ). Based on the results, it can be stated that the type of carbon source applied during incubation plays a crucial role in determining the mineral composition of the post-culture sediments. Thus, regardless of the amount of copper ion introduced to a culture with lactate as the sole carbon source, no copper sulphide was observed in the post-culture sediments. Cultures with ethanol as the sole carbon source, on the other hand, yielded covelline or digenite in all post-culture sediments.

Surface-sediment grain-size distribution and sediment transport in the subaqueous Mekong Delta, Vietnam

NASA Astrophysics Data System (ADS)

Nguyen, T. T.; Stattegger, K.; Nittrouer, C.; Phung, P. V.; Liu, P.; DeMaster, D. J.; Bui, D. V.; Le, A. D.; Nguyen, T. N.

2016-02-01

Collected surface-sediment samples in coastal water around Mekong Delta (from distributary channels to Ca Mau Peninsula) were analyzed to determine surface-sediment grain-size distribution and sediment-transport trend in the subaqueous Mekong Delta. The grain-size data set of 238 samples was obtained by using the laser instrument Mastersizer 2000 and LS Particle Size Analyzer. Fourteen samples were selected for geochemical analysis (total-organic and carbonate content). These geochemical results were used to assist in interpreting variations of granulometricparamenters along the cross-shore transects. Nine transects were examined from CungHau river mouth to Ca Mau Peninsula and six thematic maps on the whole study area were made. The research results indicate that: (1) generally, the sediment becomes finer from the delta front downwards to prodelta and becomes coarser again and poorer sorted on the adjacent inner shelf due to different sources of sediment; (2) sediment-granulometry parameters vary among sedimentary sub-environments of the underwater part of Mekong Delta, the distance from sediment source and hydrodynamic regime controlling each region; (3) the net sediment transport is southwest toward the Ca Mau Peninsula.

Direct atmospheric deposition of 210Pb to rivers determined through 210Pb (210Po) disequilibrium and implications to sediment source apportionment

NASA Astrophysics Data System (ADS)

Blumentritt, D. J.; Shottler, S.; Engstrom, D. R.

2011-12-01

Atmospheric radioisotopes such as 210Pb can be an effective tool for determining sediment source types in rivers and streams. Pb-210 is ubiquitous in deposition from atmospheric washout and is highly particle reactive, so sediments derived from a surface with prolonged exposure to rainfall, such as farm fields, are enriched in atmospheric 210Pb. Conversely, sediment sources that are not readily exposed to rainfall (i.e. streambanks) are absent of any appreciable 210Pb. Many sediment source apportionment studies have used 210Pb to quantify the proportion of sediment loads from the two source types, field and non-field. These studies, however, primarily take place in smaller watersheds where 210Pb that falls directly onto the surface of the water is assumed negligible. Lake Pepin is a riverine lake located in southeastern Minnesota with a 122,000 km2 watershed composed of three major rivers, the Minnesota, headwaters Mississippi, and St. Croix. The sediment load in Lake Pepin has increased by an order of magnitude since Euro-American settlement in the region. Most of the sediment (>80%) is transported to Lake Pepin from the highly agricultural Minnesota River basin. Extensive sediment fingerprinting work has been done on Lake Pepin sediments, but a source of significant uncertainty still exists: How much of the 210Pb measured in Lake Pepin is directly deposited to the surface of the contributing water bodies and did not enter on eroded particles? To answer this important question, we have developed a method to quantify the amount of directly deposited 210Pb. Alpha spectrometry is used to measure 210Po, a daughter product of 210Pb decay. Because 210Po has a short half-life (138 days), it takes approximately one year to reach equilibrium with 210Pb on sediment particles. If deposition of 210Pb directly from the atmosphere to the water surface is significant, there will be disequilibrium between the two radioisotopes and the activity of 210Po will increase as an inverse exponential function, with respect to time, following sample collection. The magnitude of this increase is the amount of directly deposited 210Pb. Samples were collected at four locations, corresponding to gauging stations, on the Minnesota/Mississippi River system above Lake Pepin. Three measurements were made on each sample over the course of a year after collection. Based on those three measurements, the activity of 210Po was modeled for time zero and for the equilibrium concentration, revealing the amount of 210Pb from direct atmospheric deposition. These estimates were flow-weighted over the course of the year, providing a critical correction to the source apportionment model.

Influence of coal-tar sealcoat and other carbonaceous materials on polycyclic aromatic hydrocarbon loading in an urban watershed

USGS Publications Warehouse

Yang, Y.; Van Metre, P.C.; Mahler, B.J.; Wilson, J.T.; Ligouis, B.; Razzaque, M.; Schaeffer, D.J.; Werth, C.J.

2010-01-01

Carbonaceous material (CM) particles are the principal vectors transporting polycyclic aromatic hydrocarbons (PAHs) into urban waters via runoff; however, characteristics of CM particles in urban watersheds and their relative contributions to PAH contamination remain unclear. Our objectives were to identify the sources and distribution of CM particles in an urban watershed and to determine the types of CMs that were the dominant sources of PAHs in the lake and stream sediments. Samples of soils, parking lot and street dust, and streambed and lake sediment were collected from the Lake Como watershed in Fort Worth, Texas. Characteristics of CM particles determined by organic petrography and a significant correlation between PAH concentrations and organic carbon in coal tar, asphalt, and soot indicate that these three CM particle types are the major sources and carriers of PAHs in the watershed. Estimates of the distribution of PAHs in CM particles indicate that coal-tar pitch, usedinsomepavementsealcoats, isadominant source of PAHs in the watershed, and contributes as much as 99% of the PAHs in sealed parking lot dust, 92% in unsealed parking lot dust, 88% in commercial area soil, 71% in streambed sediment, and 84% in surficial lake sediment. ?? 2010 American Chemical Society.

Tracking the 10Be-26Al source-area signal in sediment-routing systems of arid central Australia

NASA Astrophysics Data System (ADS)

Struck, Martin; Jansen, John D.; Fujioka, Toshiyuki; Codilean, Alexandru T.; Fink, David; Fülöp, Réka-Hajnalka; Wilcken, Klaus M.; Price, David M.; Kotevski, Steven; Fifield, L. Keith; Chappell, John

2018-05-01

Sediment-routing systems continuously transfer information and mass from eroding source areas to depositional sinks. Understanding how these systems alter environmental signals is critical when it comes to inferring source-area properties from the sedimentary record. We measure cosmogenic 10Be and 26Al along three large sediment-routing systems ( ˜ 100 000 km2) in central Australia with the aim of tracking downstream variations in 10Be-26Al inventories and identifying the factors responsible for these variations. By comparing 56 new cosmogenic 10Be and 26Al measurements in stream sediments with matching data (n = 55) from source areas, we show that 10Be-26Al inventories in hillslope bedrock and soils set the benchmark for relative downstream modifications. Lithology is the primary determinant of erosion-rate variations in source areas and despite sediment mixing over hundreds of kilometres downstream, a distinct lithological signal is retained. Post-orogenic ranges yield catchment erosion rates of ˜ 6-11 m Myr-1 and silcrete-dominant areas erode as slow as ˜ 0.2 m Myr-1. 10Be-26Al inventories in stream sediments indicate that cumulative-burial terms increase downstream to mostly ˜ 400-800 kyr and up to ˜ 1.1 Myr. The magnitude of the burial signal correlates with increasing sediment cover downstream and reflects assimilation from storages with long exposure histories, such as alluvial fans, desert pavements, alluvial plains, and aeolian dunes. We propose that the tendency for large alluvial rivers to mask their 10Be-26Al source-area signal differs according to geomorphic setting. Signal preservation is favoured by (i) high sediment supply rates, (ii) high mean runoff, and (iii) a thick sedimentary basin pile. Conversely, signal masking prevails in landscapes of (i) low sediment supply and (ii) juxtaposition of sediment storages with notably different exposure histories.

A method for separation of heavy metal sources in urban groundwater using multiple lines of evidence.

PubMed

Hepburn, Emily; Northway, Anne; Bekele, Dawit; Liu, Gang-Jun; Currell, Matthew

2018-06-11

Determining sources of heavy metals in soils, sediments and groundwater is important for understanding their fate and transport and mitigating human and environmental exposures. Artificially imported fill, natural sediments and groundwater from 240 ha of reclaimed land at Fishermans Bend in Australia, were analysed for heavy metals and other parameters to determine the relative contributions from different possible sources. Fishermans Bend is Australia's largest urban re-development project, however, complicated land-use history, geology, and multiple contamination sources pose challenges to successful re-development. We developed a method for heavy metal source separation in groundwater using statistical categorisation of the data, analysis of soil leaching values and fill/sediment XRF profiling. The method identified two major sources of heavy metals in groundwater: 1. Point sources from local or up-gradient groundwater contaminated by industrial activities and/or legacy landfills; and 2. contaminated fill, where leaching of Cu, Mn, Pb and Zn was observed. Across the precinct, metals were most commonly sourced from a combination of these sources; however, eight locations indicated at least one metal sourced solely from fill leaching, and 23 locations indicated at least one metal sourced solely from impacted groundwater. Concentrations of heavy metals in groundwater ranged from 0.0001 to 0.003 mg/L (Cd), 0.001-0.1 mg/L (Cr), 0.001-0.2 mg/L (Cu), 0.001-0.5 mg/L (Ni), 0.001-0.01 mg/L (Pb), and 0.005-1.2 mg/L (Zn). Our method can determine the likely contribution of different metal sources to groundwater, helping inform more detailed contamination assessments and precinct-wide management and remediation strategies. Copyright © 2018 Elsevier Ltd. All rights reserved.

Biogeochemical snapshot of an urban water system: The Anacostia River, Washington DC

NASA Astrophysics Data System (ADS)

Macavoy, S.; Ewers, E.; Bushaw-Newton, K.

2007-12-01

Highly urbanized and contaminated with PAHs, heavy metals, and sewage, the Anacostia River flows through Maryland and Washington, DC into the tidal Potomac River. Efforts have been underway to assess the river's ecological integrity and to determine the extent of anthropogenic influences. This study examines the nutrients, bacterial biomarkers, organic material, and carbon, nitrogen and sulfur sources in the Anacostia. High biological oxygen demand and low nitrogen (0.33-0.56 mg /L)/phosphorus (0.014 - 0.021 mg/L) concentrations were observed in three areas of the river. Bacterial activity based on carbon source utilization was higher in sediment samples than in water column samples. While bacterial abundances were decreased in downstream areas of sediment; abundances increased in downstream areas in the water column. Downstream sites had higher nutrient concentrations and dissolved organic carbon (up to 13.7 mg/L). Odd-chain length and branched fatty acids (FAs) in the sediments indicated bacterial sources, but long chain FAs indicative of terrestrial primary production were also abundant in some sediments. Also dominant among methyl esters and ketones in some sediment and water column samples was methyl isobutyl ketone, a common industrial solvent and combustion by-product. Sediment carbon stable isotope analyses show a mix of autochthonous and allochthonous derived materials, but most carbon was derived from terrestrial sources (-23.3 to -31.7°). Sediment nitrogen stable isotopes ranged from -5.4 to. 5.6, showing nitrate uptake by plants and also recycling of nitrogen within the river. Sulfur sources were generally between 3 and -5, reflecting local sulfate sources and anaerobic sulfate reduction.

Exploring the uncertainty in attributing sediment contributions in fingerprinting studies due to uncertainty in determining element concentrations in source areas.

NASA Astrophysics Data System (ADS)

Gomez, Jose Alfonso; Owens, Phillip N.; Koiter, Alex J.; Lobb, David

2016-04-01

One of the major sources of uncertainty in attributing sediment sources in fingerprinting studies is the uncertainty in determining the concentrations of the elements used in the mixing model due to the variability of the concentrations of these elements in the source materials (e.g., Kraushaar et al., 2015). The uncertainty in determining the "true" concentration of a given element in each one of the source areas depends on several factors, among them the spatial variability of that element, the sampling procedure and sampling density. Researchers have limited control over these factors, and usually sampling density tends to be sparse, limited by time and the resources available. Monte Carlo analysis has been used regularly in fingerprinting studies to explore the probable solutions within the measured variability of the elements in the source areas, providing an appraisal of the probability of the different solutions (e.g., Collins et al., 2012). This problem can be considered analogous to the propagation of uncertainty in hydrologic models due to uncertainty in the determination of the values of the model parameters, and there are many examples of Monte Carlo analysis of this uncertainty (e.g., Freeze, 1980; Gómez et al., 2001). Some of these model analyses rely on the simulation of "virtual" situations that were calibrated from parameter values found in the literature, with the purpose of providing insight about the response of the model to different configurations of input parameters. This approach - evaluating the answer for a "virtual" problem whose solution could be known in advance - might be useful in evaluating the propagation of uncertainty in mixing models in sediment fingerprinting studies. In this communication, we present the preliminary results of an on-going study evaluating the effect of variability of element concentrations in source materials, sampling density, and the number of elements included in the mixing models. For this study a virtual catchment was constructed, composed by three sub-catchments each of 500 x 500 m size. We assumed that there was no selectivity in sediment detachment or transport. A numerical excercise was performed considering these variables: 1) variability of element concentration: three levels with CVs of 20 %, 50 % and 80 %; 2) sampling density: 10, 25 and 50 "samples" per sub-catchment and element; and 3) number of elements included in the mixing model: two (determined), and five (overdetermined). This resulted in a total of 18 (3 x 3 x 2) possible combinations. The five fingerprinting elements considered in the study were: C, N, 40K, Al and Pavail, and their average values, taken from the literature, were: sub-catchment 1: 4.0 %, 0.35 %, 0.50 ppm, 5.0 ppm, 1.42 ppm, respectively; sub-catchment 2: 2.0 %, 0.18 %, 0.20 ppm, 10.0 ppm, 0.20 ppm, respectively; and sub-catchment 3: 1.0 %, 0.06 %, 1.0 ppm, 16.0 ppm, 7.8 ppm, respectively. For each sub-catchment, three maps of the spatial distribution of each element was generated using the random generator of Mejia and Rodriguez-Iturbe (1974) as described in Freeze (1980), using the average value and the three different CVs defined above. Each map for each source area and property was generated for a 100 x 100 square grid, each grid cell being 5 m x 5 m. Maps were randomly generated for each property and source area. In doing so, we did not consider the possibility of cross correlation among properties. Spatial autocorrelation was assumed to be weak. The reason for generating the maps was to create a "virtual" situation where all the element concentration values at each point are known. Simultaneously, we arbitrarily determined the percentage of sediment coming from sub-catchments. These values were 30 %, 10 % and 60 %, for sub-catchments 1, 2 and 3, respectively. Using these values, we determined the element concentrations in the sediment. The exercise consisted of creating different sampling strategies in a virtual environment to determine an average value for each of the different maps of element concentration and sub-catchment, under different sampling densities: 200 different average values for the "high" sampling density (average of 50 samples); 400 different average values for the "medium" sampling density (average of 25 samples); and 1,000 different average values for the "low" sampling density (average of 10 samples). All these combinations of possible values of element concentrations in the source areas were solved for the concentration in the sediment already determined for the "true" solution using limSolve (Soetaert et al., 2014) in R language. The sediment source solutions found for the different situations and values were analyzed in order to: 1) evaluate the uncertainty in the sediment source attribution; and 2) explore strategies to detect the most probable solutions that might lead to improved methods for constructing the most robust mixing models. Preliminary results on these will be presented and discussed in this communication. Key words: sediment, fingerprinting, uncertainty, variability, mixing model. References Collins, A.L., Zhang, Y., McChesney, D., Walling, D.E., Haley, S.M., Smith, P. 2012. Sediment source tracing in a lowland agricultural catchment in southern England using a modified procedure combining statistical analysis and numerical modelling. Science of the Total Environment 414: 301-317. Freeze, R.A. 1980. A stochastic-conceptual analysis of rainfall-runoff processes on a hillslope. Water Resources Research 16: 391-408.

Historical record of lead accumulation and source in the tidal flat of Haizhou Bay, Yellow Sea: Insights from lead isotopes.

PubMed

Zhang, Rui; Guan, Minglei; Shu, Yujie; Shen, Liya; Chen, Xixi; Zhang, Fan; Li, Tiegang

2016-05-15

In order to investigate the historical records of lead contamination and source in coastal region of Haizhou Bay, Yellow Sea, a sediment core was collected from tidal flat, dated by (210)Pb and (137)Cs. Lead and its stable isotopic ratios were determined. The profiles of enrichment factor (EF) and Pb isotope ratios showed increasing trend upward throughout the core, correlating closely with the experience of a rapid economic and industrial development of the catchment. According to Pb isotopic ratios, coal combustion emission mainly contributed to the Pb burden in sediments. Based on end-member model, coal combustion emission dominated anthropogenic Pb sources in recent decades contributing from 48% to 67% in sediment. And the contribution of leaded gasoline was lower than 20%. A stable increase of coal combustion source was found in sediment core, while the contribution of leaded gasoline had declined recently, with the phase-out of leaded gasoline in China. Copyright © 2016 Elsevier Ltd. All rights reserved.

Source apportionment of PAH in Hamilton Harbour suspended sediments: comparison of two factor analysis methods.

PubMed

Sofowote, Uwayemi M; McCarry, Brian E; Marvin, Christopher H

2008-08-15

A total of 26 suspended sediment samples collected over a 5-year period in Hamilton Harbour, Ontario, Canada and surrounding creeks were analyzed for a suite of polycyclic aromatic hydrocarbons and sulfur heterocycles. Hamilton Harbour sediments contain relatively high levels of polycyclic aromatic compounds and heavy metals due to emissions from industrial and mobile sources. Two receptor modeling methods using factor analyses were compared to determine the profiles and relative contributions of pollution sources to the harbor; these methods are principal component analyses (PCA) with multiple linear regression analysis (MLR) and positive matrix factorization (PMF). Both methods identified four factors and gave excellent correlation coefficients between predicted and measured levels of 25 aromatic compounds; both methods predicted similar contributions from coal tar/coal combustion sources to the harbor (19 and 26%, respectively). One PCA factor was identified as contributions from vehicular emissions (61%); PMF was able to differentiate vehicular emissions into two factors, one attributed to gasoline emissions sources (28%) and the other to diesel emissions sources (24%). Overall, PMF afforded better source identification than PCA with MLR. This work constitutes one of the few examples of the application of PMF to the source apportionment of sediments; the addition of sulfur heterocycles to the analyte list greatly aided in the source identification process.

Investigating the distribution and sources of organic matter in surface sediment of Coombabah Lake (Australia) using elemental, isotopic and fatty acid biomarkers

NASA Astrophysics Data System (ADS)

Dunn, R. J. K.; Welsh, D. T.; Teasdale, P. R.; Lee, S. Y.; Lemckert, C. J.; Meziane, T.

2008-10-01

Extensive physical and biological measurements were made of the surface sediments within the shallow, semi-urbanised Coombabah Lake in southern Moreton Bay, Australia. Sediment bulk parameters (C/N ratios, δ13C and δ15N) and fatty acid biomarkers were used to determine distributions and sources of organic matter in the intertidal sediments. The determination of organic matter sources within coastal and estuarine settings is important in understanding the roles of organic matter as energy and nutrient sources. Spatial variability of biomarker values within the sediments were interpreted by thematic maps employing the Krigging algorithm. Grain size analysis indicated the lake was dominated by mud (<63 μm) in the southern (landward) and sand (>63 μm) in the northern (seaward) lake regions, respectively. Surface sediment organic C and N values ranged from 0.12% to 1.76% and 0.01% to 0.12% dry weight, respectively, and C/N ratios averaged 16.3±3.19%. Sedimentary δ13C values ranged from -26.1‰ to -20.9‰, with an average value of -23.9±1.0‰. Sedimentary δ15N values ranged from +1.7‰ to +4.8‰, with an average value of +2.8±0.8‰. Bulk sediment parameters suggested that sedimentary organic matter is provided predominantly by allochthonous sources in the form of fringing mangroves. Thirty-nine individual fatty acids were identified using gas chromatography-mass spectrometry. The mean contributions of long chain fatty acids (LCFAs), polyunsaturated fatty acids (PUFAs), saturated fatty acids (SAFAs) and bacterial fatty acids (BAFAs) were, respectively, 13.9±11.4%, 7.6±4.1%, 53.6±8.6% and 18.2±4.6% of the identified fatty acid methyl esters (FAMEs), with BAFAs occurring in all sampled sediments. Fatty acid compositions varied throughout lake sediments, which indicated spatial differences in autochthonous and allochthonous organic matter sources, including terrestrial and planktonic (i.e. zooplankton, diatoms and other algal species) sources. The contribution of organic matter from shoreline mangroves was confirmed by the presence of LCFAs and 18:2 ω6 and 18:3 ω3, which are markers for mangroves in this ecosystem. BAFAs were identified in increased proportions in sediments adjacent to urban developments and dominated by mud. Grain size was identified as a dominant factor in the fatty acid compositions and contributing values to FAME pool. Spatial patterns of C/N ratios, δ13C and δ15N values, and fatty acid biomarker contributions illustrated that there is a greater contribution of autochthonous and labile organic matter to the sedimentary organic matter pool in the northern (marine entrance) sediments compared to the more allochthonous sourced organic matter of the southern region of the lake. This study details the distribution and sources of organic matter within Coombabah Lake and illustrates the usefulness of a multiple biomarker approach in discriminating organic matter sources within estuarine environments.

Evaluating Local and Regional Sources of Trace Element Contamination in a Rural Sub Estuary of the Upper Chesapeake Bay

NASA Astrophysics Data System (ADS)

Krahforst, C.; Hartman, S.; Sherman, L.; Kehm, K.

2014-12-01

The distribution of trace elements (V, Cr, Co, Ni, Cu, Zn, As, Ag, Cd, Sn, Ba, W, Pb and U) along with Al and Fe and other sediment characteristics in surface sediment and sediment cores from the Chester River - a sub estuary of the Chesapeake Bay located in a predominantly agricultural watershed of Maryland's upper Eastern Shore, USA - have been determined in order to add to the understanding of contaminant transport and fate and inform management strategies designed to maintain or improve the ecological condition of estuaries. These analyses coupled with the comparison of elemental analysis of 210Pb - dated sediment cores, main stem water quality surveys, and a review of recent EPA National Coastal Condition Assessment sediment data from Chesapeake Bay provide added information about the roles of local and region scale processes on ecosystem condition. The high amount of suspended sediment in the Chester River (5-20 mg L-1) is an important factor controlling water quality conditions of the Chester River and a prime focus for environmental management of this system. Sources of suspended matter include local runoff, atmospheric deposition, local resuspension, and exchange with the Chesapeake Bay. In principle, each of these sources could be distinguished on the basis of chemical composition of surface sediment. Preliminary results from multivariate analytic models indicate that many of the elements investigated display significant covariance with Al (and other predominantly crustal signatures) which may indicate limited exogenic sources of contamination for sediments of this watershed. For example total Pb concentrations are mostly below the NOAA's low toxic effects level and lower than the median value of NCCA data for the upper Chesapeake suggesting that sediments have significant sources from within the watershed. Further, significant higher concentrations of Sn and Cu coincide with sediment collected in or near marinas and point to localized anthropogenic sources for these elements. Elemental enrichment values relative to Al of Chester River sediments are significantly lower than observations in sediments from Chesapeake Bay overall and may indicate that local watershed management strategies may be effective for improving water and habitat quality of the Chester River.

Vertical profile, source apportionment, and toxicity of PAHs in sediment cores of a wharf near the coal-based steel refining industrial zone in Kaohsiung, Taiwan.

PubMed

Chen, Chih-Feng; Chen, Chiu-Wen; Ju, Yun-Ru; Dong, Cheng-Di

2016-03-01

Three sediment cores were collected from a wharf near a coal-based steel refining industrial zone in Kaohsiung, Taiwan. Analyses for 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in the core sediment samples were conducted using gas chromatography-mass spectrometry. The vertical profiles of PAHs in the core sediments were assessed, possible sources and apportionment were identified, and the toxicity risk of the core sediments was determined. The results from the sediment analyses showed that total concentrations of the 16 PAHs varied from 11774 ± 4244 to 16755 ± 4593 ng/g dry weight (dw). Generally, the vertical profiles of the PAHs in the sediment cores exhibited a decreasing trend from the top to the lower levels of the S1 core and an increasing trend of PAHs from the top to the lower levels of the S2 and S3 cores. Among the core sediment samples, the five- and six-ring PAHs were predominantly in the S1 core, ranging from 42 to 54 %, whereas the composition of the PAHs in the S2 and S3 cores were distributed equally across three groups: two- and three-ring, four-ring, and five- and six-ring PAHs. The results indicated that PAH contamination at the site of the S1 core had a different source. The molecular indices and principal component analyses with multivariate linear regression were used to determine the source contributions, with the results showing that the contributions of coal, oil-related, and vehicle sources were 38.6, 35.9, and 25.5 %, respectively. A PAH toxicity assessment using the mean effect range-median quotient (m-ERM-q, 0.59-0.79), benzo[a]pyrene toxicity equivalent (TEQ(carc), 1466-1954 ng TEQ/g dw), and dioxin toxicity equivalent (TEQ(fish), 3036-4174 pg TEQ/g dw) identified the wharf as the most affected area. The results can be used for regular monitoring, and future pollution prevention and management should target the coal-based industries in this region for pollution reduction.

Terrigenous helium in deep-sea sediments

NASA Astrophysics Data System (ADS)

Marcantonio, Franco; Higgins, Sean; Anderson, Robert F.; Stute, Martin; Schlosser, Peter; Rasbury, E. Troy

1998-05-01

We have measured the isotope ratios of helium contained in various terrigenous materials that contribute to deep-sea sediments. These materials include ice-rafted debris from the North Atlantic, Chinese Loess, and sediment collected at or near the mouths of three large rivers: the Amazon, the Ganges, and the Yangtze. We observe terrigenous 3He/ 4He ratios that vary from 1.8 × 10 -9 to 4.6 × 10 -7, i.e., values that are higher than the theoretically-derived range of 10 -9 to 10 -8. Atlantic and Pacific deep-sea sediment 3He/ 4He ratios can be explained by mixing of helium from similar extraterrestrial but different terrigenous sources. Terrigenous sources for North Atlantic and North Pacific sediments are characterized by 3He and 4He contents that are higher, and 3He/ 4He ratios that are lower, than those for central and eastern equatorial Pacific sediments. This is consistent with the supply to the North Atlantic and North Pacific oceans of older cratonic continental material that contains high amounts of in situ-produced nucleogenic and radiogenic helium. Terrigenous material transported to central and eastern equatorial Pacific sediments contains lower amounts of 3He and 4He and higher 3He/ 4He ratios, indicative of supply from a more juvenile Andean source. In the equatorial Atlantic (core V31-135), we have used previously-published 230Th data to determine an extraterrestrial 3He flux of (1.16 ± 0.15) × 10 -12 cm 3STP · cm -2 · ka -1, within error of that previously determined in sediments from the equatorial Pacific Ocean ([0.78 ± 0.29] × 10 -13 cm 3STP · cm -2 · ka -1; Marcantonio et al., 1996).

Estimation of different source contributions to sediment organic matter in an agricultural-forested watershed using end member mixing analyses based on stable isotope ratios and fluorescence spectroscopy.

PubMed

Derrien, Morgane; Kim, Min-Seob; Ock, Giyoung; Hong, Seongjin; Cho, Jinwoo; Shin, Kyung-Hoon; Hur, Jin

2018-03-15

The two popular source tracing tools of stable isotope ratios (δ 13 C and δ 15 N) and fluorescence spectroscopy were used to estimate the relative source contributions to sediment organic matter (SeOM) at five different river sites in an agricultural-forested watershed (Soyang Lake watershed), and their capabilities for the source assignment were compared. Bulk sediments were used for the stable isotopes, while alkaline extractable organic matter (AEOM) from sediments was used to obtain fluorescent indices for SeOM. Several source discrimination indices were fully compiled for a range of the SeOM sources distributed in the catchments of the watershed, which included soils, forest leaves, crop (C3 and C4) and riparian plants, periphyton, and organic fertilizers. The relative source contributions to the river sediment samples were estimated via end member mixing analysis (EMMA) based on several selected discrimination indices. The EMMA based on the isotopes demonstrated that all sediments were characterized by a medium to a high contribution of periphyton ranging from ~30% to 70% except for one site heavily affected by forest and agricultural fields with relatively high contributions of terrestrial materials. The EMMA based on fluorescence parameters, however, did not show similar results with low contributions from forest leaf and periphyton. The characteristics of the studied watershed were more consistent with the source contributions determined by the isotope ratios. The discrepancy in the EMMA capability for source assignments between the two analytical tools can be explained by the limited analytical window of fluorescence spectroscopy for non-fluorescent dissolved organic matter (FDOM) and the inability of AEOM to represent original bulk particulate organic matter (POM). Copyright © 2017 Elsevier B.V. All rights reserved.

SEDIMENT CHEMICAL CONTAMINATION AND TOXICITY ASSOCIATED WITH A COASTAL GOLF COURSE COMPLEX.

EPA Science Inventory

The increasing density of golf courses represents a potential source of sediment contamination to nearby coastal areas, the chemical and biological magnitude of which is almost unknown. The objective of this study was to determine the concentrations of contaminants and toxicities...

Estimation of Polychlorinated Biphenyl Sources in Industrial Port Sediments Using a Bayesian Semifactor Model Considering Unidentified Sources.

PubMed

Anezaki, Katsunori; Nakano, Takeshi; Kashiwagi, Nobuhisa

2016-01-19

Using the chemical balance method, and considering the presence of unidentified sources, we estimated the origins of PCB contamination in surface sediments of Muroran Port, Japan. It was assumed that these PCBs originated from four types of Kanechlor products (KC300, KC400, KC500, and KC600), combustion and two kinds of pigments (azo and phthalocyanine). The characteristics of these congener patterns were summarized on the basis of principal component analysis and explanatory variables determined. A Bayesian semifactor model (CMBK2) was applied to the explanatory variables to analyze the sources of PCBs in the sediments. The resulting estimates of the contribution ratio of each kind of sediment indicate that the existence of unidentified sources can be ignored and that the assumed seven sources are adequate to account for the contamination. Within the port, the contribution ratio of KC500 and KC600 (used as paints for ship hulls) was extremely high, but outside the port, the influence of azo pigments was observable to a limited degree. This indicates that environmental PCBs not derived from technical PCBs are present at levels that cannot be ignored.

Clay-mineral suites, sources, and inferred dispersal routes: Southern California continental shelf

USGS Publications Warehouse

Hein, J.R.; Dowling, J.S.; Schuetze, A.; Lee, H.J.

2003-01-01

Clay mineralogy is useful in determining the distribution, sources, and dispersal routes of fine-grained sediments. In addition, clay minerals, especially smectite, may control the degree to which contaminants are adsorbed by the sediment. We analyzed 250 shelf sediment samples, 24 river-suspended-sediment samples, and 12 river-bed samples for clay-mineral contents in the Southern California Borderland from Point Conception to the Mexico border. In addition, six samples were analyzed from the Palos Verdes Headland in order to characterize the clay minerals contributed to the offshore from that point source. The <2 ??m-size fraction was isolated, Mg-saturated, and glycolated before analysis by X-ray diffraction. Semi-quantitative percentages of smectite, illite, and kaolinite plus chlorite were calculated using peak areas and standard weighting factors. Most fine-grained sediment is supplied to the shelf by rivers during major winter storms, especially during El Nin??o years. The largest sediment fluxes to the region are from the Santa Ynez and Santa Clara Rivers, which drain the Transverse Ranges. The mean clay-mineral suite for the entire shelf sediment data set (26% smectite, 50% illite, 24% kaolinite+chlorite) is closely comparable to that for the mean of all the rivers (31% smectite, 49% illite, 20% kaolinite+chlorite), indicating that the main source of shelf fine-grained sediments is the adjacent rivers. However, regional variations do exist and the shelf is divided into four provinces with characteristic clay-mineral suites. The means of the clay-mineral suites of the two southernmost provinces are within analytical error of the mineral suites of adjacent rivers. The next province to the north includes Santa Monica Bay and has a suite of clay minerals derived from mixing of fine-grained sediments from several sources, both from the north and south. The northernmost province clay-mineral suite matches moderately well that of the adjacent rivers, but does indicate some mixing from sources in adjacent provinces.

From source to sink: Unravelling the complex in situ cosmogenic 10Be-14C signature in eroding bedrock surfaces and river sediment from the Bolivian Altiplano

NASA Astrophysics Data System (ADS)

Hippe, Kristina; Lupker, Maarten; Gordijn, Tiemen; Ivy-Ochs, Susan; Kober, Florian; Christl, Marcus; Wacker, Lukas; Hajdas, Irka; Wieler, Rainer

2017-04-01

Sediment storage is a critical component of fluvial sedimentary systems. By interrupting transport processes, intermittent sediment storage can effectively decouple source from sink and buffer the transmission of signals of environmental change (e.g., in climate, vegetation, human impact) through the fluvial system. Combined in situ cosmogenic 14C-10Be analysis in fluvial sediment provides a unique method to simultaneously assess sediment transit times (in situ 14C signal) and long-term sediment production rates from bedrock erosion (10Be signal). The key is the much shorter half-life of in situ 14C compared to 10Be which causes a rapid decrease of the in situ 14C concentration when sediment is buried during sediment storage and creates an offset to 10Be. Here, we use the in situ 14C-10Be chronometer to determine changes in surface erosion and estimate absolute rates of sediment transfer in a catchment on the Bolivian Altiplano. Previous research in the study area has found a significant offset in the in situ 14C-10Be inventories from river sediments with much lower in situ 14C concentrations than expected from the 10Be content for steady-state conditions. This offset has been interpreted to reflect sediment storage over the past 11-20 ka [1]. Additional analyses of in situ 14C and 10Be in a dense network of sediment samples from the main channel and tributaries agree with previous data and yield very low in situ 14C concentrations that suggest an increase in storage duration by a few ka with downstream distance. However, analyses of in situ 14C-10Be in hilltop samples from the eroding source area reveal an almost as large offset as in the river sediments. Such complex in situ 14C-10Be inventories in the source area have a severe impact on the quantification of sediment storage times and strongly challenge previous data interpretation. The most straightforward explanation for the in situ 14C-10Be offset at hilltop locations is a change in denudation rate during the Holocene. Using a simple model of a rapid, one-step denudation rate change, a minimum increase by a factor of 30-40 at about 4-6 ka ago is required to approach the measured in situ 14C-10Be concentrations. This corresponds to the Mid-Holocene shift towards wetter climate in the Eastern Andes as proposed from paleolake deposits [2]. Assuming that fluvial sediments inherit a complex 10Be-14C signal from the source area, the estimated duration of total sediment storage reduces to 1-5 ka and is, thus, much shorter than previously assumed. These time spans correlate well with ages of 2-3 ka obtained for fluvial terraces in the study area by radiocarbon and 10Be depth profile dating. Our data allows tracing the spatial pattern of sediment storage and quantify individual storage durations during source-to-sink sediment transfer through the catchment. We further highlight the potential of the in situ 14C-10Be chronometer to determine the magnitude and timing of changes in surface erosion in the past and, thus, to identify transience in eroding landscapes. [1] Hippe et al., 2012 - Geomorphology 179 - pp. 58-70. [2] Rigsby et al., 2005 - J Quaternary Sci 20 - pp. 671-691.

The Influence of Erosional Hotspots on Watershed-scale Phosphorus Dynamics in Intensively Managed Agricultural Landscapes

NASA Astrophysics Data System (ADS)

Baker, A.; Finlay, J. C.; Gran, K. B.; Karwan, D. L.; Engstrom, D. R.; Atkins, W.; Muramoto-Mathieu, M.

2017-12-01

The Minnesota River Basin is an intensively-managed agricultural watershed which contributes disproportionately to downstream sediment and nutrient loading. The Le Sueur River, an actively eroding tributary to the Minnesota River, has been identified as a disproportionate contributor of sediment and nutrients to this system. In an effort to identify best practices for reduction of phosphorus (P) in the context of intensifying agriculture and climate change pressure, we coupled investigation of source sediment P chemistry with an existing fine sediment budget to create a watershed mass balance for sediment-associated P. Sediments collected from primary source areas including agricultural fields, glacial till bluffs, alluvial streambanks, ravines, and agricultural ditches were analyzed for total- and extractable-P, and sorptive properties. Preliminary integration of these data into a mass-balance suggests that less than a quarter of the total-P exported from this watershed can be attributed directly to sediment inputs, likely due to the low P concentration of most sediment sources. While sediment may supply less than 25% of the total-P exiting the Le Sueur, a high proportion of total-P load ( 66% on average) is in particulate form. This finding indicates that sorption of dissolved-P from upstream sources onto fine sediment plays a major role in determining the form and reactivity of P in the watershed. Sorption processes convert dissolved-P into particulate-P, and may substantially alter the fate and reactivity of P in downstream channels and lakes. In highly erosive rivers, as the Le Sueur, where inputs of sediment from deep soil horizons are dominant, the dynamic relationship between sediment and dissolved-P must be evaluated and incorporated into models to forecast potential for P retention and export from the landscape. By incorporating results of this mass balance and analysis of sediment sorptive properties into existing models, we can develop strategies that most effectively address both of these interwoven pollutants to aquatic ecosystems.

Using rare earth elements to trace wind-driven dispersion of sediments from a point source

NASA Astrophysics Data System (ADS)

Van Pelt, R. Scott; Barnes, Melanie C. W.; Strack, John E.

2018-06-01

The entrainment and movement of aeolian sediments is determined by the direction and intensity of erosive winds. Although erosive winds may blow from all directions, in most regions there is a predominant direction. Dust emission causes the removal preferentially of soil nutrients and contaminants which may be transported tens to even thousands of kilometers from the source and deposited into other ecosystems. It would be beneficial to understand spatially and temporally how the soil source may be degraded and depositional zones enriched. A stable chemical tracer not found in the soil but applied to the surface of all particles in the surface soil would facilitate this endeavor. This study examined whether solution-applied rare earth elements (REEs) could be used to trace aeolian sediment movement from a point source through space and time at the field scale. We applied erbium nitrate solution to a 5 m2 area in the center of a 100 m diameter field 7854 m2 on the Southern High Plains of Texas. The solution application resulted in a soil-borne concentration three orders of magnitude greater than natively found in the field soil. We installed BSNE sampler masts in circular configurations and collected the trapped sediment weekly. We found that REE-tagged sediment was blown into every sampler mast during the course of the study but that there was a predominant direction of transport during the spring. This preliminary investigation suggests that the REEs provide a viable and incisive technique to study spatial and temporal variation of aeolian sediment movement from specific sources to identifiable locations of deposition or locations through which the sediments were transported as horizontal mass flux and the relative contribution of the specific source to the total mass flux.

Copper content in lake sediments as a tracer of urban emissions: evaluation through a source-transport-storage model.

PubMed

Cui, Qing; Brandt, Nils; Sinha, Rajib; Malmström, Maria E

2010-06-01

A coupled source-transport-storage model was developed to determine the origin and path of copper from materials/goods in use in the urban drainage area and the fate of copper in local recipient lakes. The model was applied and tested using five small lakes in Stockholm, Sweden. In the case of the polluted lakes Råcksta Träsk, Trekanten and Långsjön, the source strengths of copper identified by the model were found to be well linked with independently observed copper contents in the lake sediments through the model. The model results also showed that traffic emissions, especially from brake linings, dominated the total load in all five cases. Sequential sedimentation and burial proved to be the most important fate processes of copper in all lakes, except Råcksta Träsk, where outflow dominated. The model indicated that the sediment copper content can be used as a tracer of the urban diffuse copper source strength, but that the response to changes in source strength is fairly slow (decades). Major uncertainties in the source model were related to management of stormwater in the urban area, the rate of wear of brake linings and weathering of copper roofs. The uncertainty of the coupled model is in addition affected mainly by parameters quantifying the sedimentation and bury processes, such as particulate fraction, settling velocity of particles, and sedimentation rate. As a demonstration example, we used the model to predict the response of the sediment copper level to a decrease in the copper load from the urban catchment in one of the case study lakes. Copyright (c) 2010 Elsevier B.V. All rights reserved.

δ 13C and δD identification of sources of lipid biomarkers in sediments of Lake Haruna (Japan)

NASA Astrophysics Data System (ADS)

Chikaraishi, Yoshito; Naraoka, Hiroshi

2005-07-01

Organic materials in lacustrine sediments are from multiple terrestrial and aquatic sources. In this study, carbon (δ 13C) and hydrogen isotopic compositions (δD) of phytol, various sterols, and major n-fatty acids in sediments at Lake Haruna, Japan, were determined in their solvent-extractable (free) and saponification-released forms (bound). The δ 13C-δD distributions of these lipid molecules in sediments are compared with those of terrestrial C3 and C4 plants, aquatic C3 plants, and plankton to evaluate their relative contributions. δ 13C-δD of free phytol in sediments is very close to that of phytol in plankton samples, whereas δ 13C-δD of bound phytol in sediments is on a mixing line between terrestrial C3 plant and plankton material. Unlike phytol, no significant δ 13C-δD difference between free and bound forms was found in sterols and n-fatty acids. δ 13C-δD values of algal sterols such as 24-methylcholesta-5,22-dien-3β-ol in sediments are close to those of plankton, whereas δ 13C-δD of multiple-source sterols such as 24-ethylcholest-5-en-3β-ol and of major n-fatty acids such as n-hexadecanoic acid in sediments are between those of terrestrial C3 plants and plankton samples. Thus, δ 13C-δD distributions clearly indicate the specific source contributions of biomarkers preserved in a lacustrine environment. Free phytol and algal sterols can be attributed to phytoplankton, and bound phytol, multiple source sterols, and major n-fatty acids are contributed by both terrestrial C3 plants and phytoplankton.

10Be constrains the sediment sources and sediment yields to the Great Barrier Reef from the tropical Barron River catchment, Queensland, Australia

NASA Astrophysics Data System (ADS)

Nichols, K. K.; Bierman, P. R.; Rood, D. H.

2014-12-01

Estimates of long-term, background sediment generation rates place current and future sediment fluxes to the Great Barrier Reef in context. Without reliable estimates of sediment generation rates and without identification of the sources of sediment delivered to the reef prior to European settlement (c. 1850), determining the necessity and effectiveness of contemporary landscape management efforts is difficult. Using the ~2100-km2 Barron River catchment in Queensland, Australia, as a test case, we use in situ-produced 10Be to derive sediment generation rate estimates and use in situ and meteoric 10Be to identify the source of that sediment, which enters the Coral Sea near Cairns. Previous model-based calculations suggested that background sediment yields were up to an order of magnitude lower than contemporary sediment yields. In contrast, in situ 10Be data indicate that background (43 t km-2 y-1) and contemporary sediment yields (~45 t km-2 y-1) for the Barron River are similar. These data suggest that the reef became established in a sediment flux similar to what it receives today. Since western agricultural practices increased erosion rates, large amounts of sediment mobilized from hillslopes during the last century are probably stored in Queensland catchments and will eventually be transported to the coast, most likely in flows triggered by rare but powerful tropical cyclones that were more common before European settlement and may increase in strength as climate change warms the south Pacific Ocean. In situ and meteoric 10Be concentrations of Coral Sea beach sand near Cairns are similar to those in rivers on the Atherton Tablelands, suggesting that most sediment is derived from the extensive, low-gradient uplands rather than the steep, more rapidly eroding but beach proximal escarpment.

Upward movement of plutonium to surface sediments during an 11-year field study.

PubMed

Kaplan, D I; Demirkanli, D I; Molz, F J; Beals, D M; Cadieux, J R; Halverson, J E

2010-05-01

An 11-year lysimeter study was established to monitor the movement of Pu through vadose zone sediments. Sediment Pu concentrations as a function of depth indicated that some Pu moved upward from the buried source material. Subsequent numerical modeling suggested that the upward movement was largely the result of invading grasses taking up the Pu and translocating it upward. The objective of this study was to determine if the Pu of surface sediments originated from atmosphere fallout or from the buried lysimeter source material (weapons-grade Pu), providing additional evidence that plants were involved in the upward migration of Pu. The (240)Pu/(239)Pu and (242)Pu/(239)Pu atomic fraction ratios of the lysimeter surface sediments, as determined by Thermal Ionization Mass Spectroscopy (TIMS), were 0.063 and 0.00045, respectively; consistent with the signatures of the weapons-grade Pu. Our numerical simulations indicate that because plants create a large water flux, small concentrations over multiple years may result in a measurable accumulation of Pu on the ground surface. These results may have implications on the conceptual model for calculating risk associated with long-term stewardship and monitored natural attenuation management of Pu contaminated subsurface and surface sediments. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Triclosan and Hydroxylated Polybrominated Diphenyl Ethers in Lake and Esturaine Sediments

NASA Astrophysics Data System (ADS)

Arnold, W. A.; Kerrigan, J. F.; McNeill, K.; Erickson, P. R.; Grandbois, M.

2014-12-01

Halogenated diphenyl ethers are a class of emerging contaminants that includes the antibacterial compound triclosan and the flame retardant polybrominated diphenyl ethers (PBDEs). Both triclosan and hydroxylated polybrominated diphenyl ethers (OH-BDEs) are known to form dioxins when exposed to sunlight in aqueous solution. Thus, it is important to understand the sources and presence of these compounds in the environment, especially because OH-BDEs are breakdown products of PBDEs and also naturally produced compounds. In this work, the levels of OH-BDEs were determined in lake sediments from Minnesota and esturaine sediments from San Francisco Bay. Both surface sediments over a broad spatial area and sediment cores were collected and analyzed. Triclosan was used as a marker of wastewater as a source of the targeted emerging contaminants. The relationship between triclosan and OH-BDE levels provides insight into the importance of natural and anthropogenic influences on the levels of OH-BDEs.

MERCURY CONCENTRATIONS IN SEDIMENT, WATER AND BIOTA COLLECTED FROM NEAR-COASTAL AREAS IMPACTED BY COMMON ESTUARINE STRESSORS

EPA Science Inventory

Mercury concentrations in non-commercial organisms indigenous to the Gulf of Mexico are not well characterized particularly when compared to potential sources. In response to this need, mercury levels were determined in sediment, water and various biota in reference and non-refer...

Guam Pago Watershed Conservation

Treesearch

Maria Lynn Cruz; Laura F. Biggs

2016-01-01

The purpose of this research is to explore water science methodologies in determining the source of sedimentation in the Guam Pago Watershed. Watersheds provide drinking water, an agricultural water source, and forms of recreation.

Assessment of chemical and biological significance of arsenical species in the Maurice River drainage basin (N. J. ). Part I. Distribution in water and river and lake sediments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faust, S.D.; Winka, A.J.; Belton, T.

1987-01-01

Levels of arsenic were determined in the bottom sediments and waters of the Maurice River, Blackwater Branch, and Union Lake, (N.J.) that were contaminated by a local chemical industry. This was the only known source of the arsenic. Levels of total arsenic in the sediments and waters were determined quarterly over the course of one year. Sediments were extracted for water soluble and total extractable arsenic fractions and partitioned into four species: monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), arsenite (As(III)), and arsenate (As(V)). In Union Lake at a shallow sandy sediment site, As (V) predominates. In organic sediments, As (III)more » or (V) predominate depending upon the dissolved oxygen content of the overlying waters. The oxidations state of the arsenic was affected also by the seasonal lake cycles of stratifying or mixing.« less

Identifying fine sediment sources to alleviate flood risk caused by fine sediments through catchment connectivity analysis

NASA Astrophysics Data System (ADS)

Twohig, Sarah; Pattison, Ian; Sander, Graham

2017-04-01

Fine sediment poses a significant threat to UK river systems in terms of vegetation, aquatic habitats and morphology. Deposition of fine sediment onto the river bed reduces channel capacity resulting in decreased volume to contain high flow events. Once the in channel problem has been identified managers are under pressure to sustainably mitigate flood risk. With climate change and land use adaptations increasing future pressures on river catchments it is important to consider the connectivity of fine sediment throughout the river catchment and its influence on channel capacity, particularly in systems experiencing long term aggradation. Fine sediment erosion is a continuing concern in the River Eye, Leicestershire. The predominately rural catchment has a history of flooding within the town of Melton Mowbray. Fine sediment from agricultural fields has been identified as a major contributor of sediment delivery into the channel. Current mitigation measures are not sustainable or successful in preventing the continuum of sediment throughout the catchment. Identifying the potential sources and connections of fine sediment would provide insight into targeted catchment management. 'Sensitive Catchment Integrated Modelling Analysis Platforms' (SCIMAP) is a tool often used by UK catchment managers to identify potential sources and routes of sediment within a catchment. SCIMAP is a risk based model that combines hydrological (rainfall) and geomorphic controls (slope, land cover) to identify the risk of fine sediment being transported from source into the channel. A desktop version of SCIMAP was run for the River Eye at a catchment scale using 5m terrain, rainfall and land cover data. A series of SCIMAP model runs were conducted changing individual parameters to determine the sensitivity of the model. Climate Change prediction data for the catchment was used to identify potential areas of future connectivity and erosion risk for catchment managers. The results have been subjected to field validation as part of a wider research project which provides an indication of the robustness of widespread models as effective management tools.

Rare earth elements in fine-grained sediments of major rivers from the high-standing island of Taiwan

NASA Astrophysics Data System (ADS)

Li, Chuan-Shun; Shi, Xue-Fa; Kao, Shuh-Ji; Liu, Yan-Guang; Lyu, Hua-Hua; Zou, Jian-Jun; Liu, Sheng-Fa; Qiao, Shu-Qing

2013-06-01

Thirty-eight sediment samples from 15 primary rivers on Taiwan were retrieved to characterize the rare earth element (REE) signature of fluvial fine sediment sources. Compared to the three large rivers on the Chinese mainland, distinct differences were observed in the REE contents, upper continental crust normalized patterns and fractionation factors of the sediment samples. The average REE concentrations of the Taiwanese river sediments are higher than those of the Changjiang and Huanghe, but lower than the Zhujiang. Light rare earth elements (LREEs) are enriched relative to heavy rare earth elements (HREEs) with ratios from 7.48 to 13.03. We found that the variations in (La/Lu)UCC-(Gd/Lu)UCC and (La/Yb)UCC-(Gd/Yb)UCC are good proxies for tracing the source sediments of Taiwanese and Chinese rivers due to their distinguishable values. Our analyses indicate that the REE compositions of Taiwanese river sediments were primarily determined by the properties of the bedrock, and the intensity of chemical weathering in the drainage areas. The relatively high relief and heavy rainfall also have caused the REEs in the fluvial sediments from Taiwan to be transported to the estuaries down rivers from the mountains, and in turn delivered nearly coincidently to the adjacent seas by currents and waves. Our studies suggest that the REE patterns of the river sediments from Taiwan are distinguishable from those from the other sources of sediments transported into the adjacent seas, and therefore are useful proxies for tracing the provenances and dispersal patterns of sediments, as well as paleoenvironmental changes in the marginal seas.

[Sources of Methane in the Boreal Region

NASA Technical Reports Server (NTRS)

1998-01-01

In determining the global methane budget the sources of methane must be balanced with the sinks and atmospheric inventory. The approximate contribution of the different methane sources to the budget has been establish showing the major terrestrial inputs as rice, wetlands, bogs, fens, and tundra. Measurements and modeling of production in these sources suggest that temperature, water table height and saturation along with substratum composition are important in controlling methane production and emission. The isotopic budget of 13 C and D/H in methane can be used as a tool to clarify the global budget. This approach has achieved success at constraining the inputs. Studies using the isotopic approach place constraints on global methane production from different sources. Also, the relation between the two biogenic production pathways, acetate fermentation and CO2 reduction, and the effect of substratum composition can be made using isotope measurements shows the relation between the different biogenic, thermogenic and anthropogenic sources of methane as a function of the carbon and hydrogen isotope values for each source and the atmosphere, tropospheric composition. Methane emissions from ponds and fens are a significant source in the methane budget of the boreal region. An initial study in 1993 and 1994 on the isotopic composition of this methane source and the isotopic composition in relation to oxidation of methane at the sediment surface of the ponds or fen was conducted as part of our BOREAS project. The isotopic composition of methane emitted by saturated anoxic sediment is dependent on the sediment composition and geochemistry, but will be influenced by in situ oxidation, in part, a function of rooted plant activity. The influence of oxidation mediated by rooted plant activities on the isotopic composition of methane is not well known and will depend on the plant type, sediment temperature, and numerous other variables. Information on this isotopic composition is important in both understanding the bio-geochemistry of the system and also in determining the regional and global inputs for the methane isotope budget. In determining the destruction of methane for balancing the atmospheric methane budget soil oxidation must be considered.

Sources and dispersal of land-based runoff from small Hawaiian drainages to a coral reef: Insights from geochemical signatures

NASA Astrophysics Data System (ADS)

Takesue, Renee K.; Storlazzi, Curt D.

2017-03-01

Land-based sediment and contaminant runoff is a major threat to coral reefs, and runoff reduction efforts would benefit from knowledge of specific runoff sources. Geochemical signatures of small drainage basins were determined in the fine fraction of soil and sediment, then used in the nearshore region of a coral reef-fringed urban embayment on southeast Oahu, Hawaii, to describe sources and dispersal of land-based runoff. The sedimentary rare earth element ratio (La/Yb)N showed a clear distinction between the two main rock types in the overall contributing area, tholeiitic and alkalic olivine basalt. Based on this geochemical signature it was apparent that the majority of terrigenous sediment on the reef flat originated from geologically old tholeiitic drainages. Sediment from one of five tholeiitic drainages had a distinct geochemical signature, and sediment with this signature was dispersed on the reef flat 2 km west and 150 m offshore of the contributing basin. Sediment and the anthropogenic metals Cd, Pb, and Zn were entrained in runoff from the most heavily urbanized region of the watershed. Although anthropogenic Cd and Zn had localized distributions close to shore, anthropogenic Pb was found associated with fine sediment on the westernmost part of the reef flat and 400 m offshore, illustrating how trade-wind-driven sediment transport can increase the scale of runoff impacts to nearshore communities. Our findings show that sediment geochemical signatures can provide insights about the source and dispersal of land-based runoff in shallow coastal environments. The application of such knowledge to watershed management and habitat remediation efforts can aid in the protection and restoration of runoff-impacted coastal ecosystems worldwide.

Sources and dispersal of land-based runoff from small Hawaiian drainages to a coral reef: Insights from geochemical signatures

USGS Publications Warehouse

Takesue, Renee K.; Storlazzi, Curt

2017-01-01

Land-based sediment and contaminant runoff is a major threat to coral reefs, and runoff reduction efforts would benefit from knowledge of specific runoff sources. Geochemical signatures of small drainage basins were determined in the fine fraction of soil and sediment, then used in the nearshore region of a coral reef-fringed urban embayment on southeast Oahu, Hawaii, to describe sources and dispersal of land-based runoff. The sedimentary rare earth element ratio (La/Yb)N showed a clear distinction between the two main rock types in the overall contributing area, tholeiitic and alkalic olivine basalt. Based on this geochemical signature it was apparent that the majority of terrigenous sediment on the reef flat originated from geologically old tholeiitic drainages. Sediment from one of five tholeiitic drainages had a distinct geochemical signature, and sediment with this signature was dispersed on the reef flat 2 km west and 150 m offshore of the contributing basin. Sediment and the anthropogenic metals Cd, Pb, and Zn were entrained in runoff from the most heavily urbanized region of the watershed. Although anthropogenic Cd and Zn had localized distributions close to shore, anthropogenic Pb was found associated with fine sediment on the westernmost part of the reef flat and 400 m offshore, illustrating how trade-wind-driven sediment transport can increase the scale of runoff impacts to nearshore communities. Our findings show that sediment geochemical signatures can provide insights about the source and dispersal of land-based runoff in shallow coastal environments. The application of such knowledge to watershed management and habitat remediation efforts can aid in the protection and restoration of runoff-impacted coastal ecosystems worldwide.

The dominant erosion processes supplying fine sediment to three major rivers in tropical Australia, the Daly (NT), Mitchell (Qld) and Flinders (Qld) Rivers

NASA Astrophysics Data System (ADS)

Caitcheon, Gary G.; Olley, Jon M.; Pantus, Francis; Hancock, Gary; Leslie, Christopher

2012-05-01

The tropics of northern Australia have received relatively little attention with regard to the impact of soil erosion on the many large river systems that are an important part of Australia's water resource, especially given the high potential for erosion when long dry seasons are followed by intense wet season rain. Here we use 137Cs concentrations to determine the erosion processes supplying sediment to two major northern Australian Rivers; the Daly River (Northern Territory), and the Mitchell River (Queensland). We also present data from five sediment samples collected from a 100 km reach of the Cloncurry River, a major tributary of the Flinders River (Queensland). Concentrations of 137Cs in the surface soil and subsurface (channel banks and gully) samples were used to derive 'best fit' probability density functions describing their distributions. These modelled distributions are then used to estimate the relative contribution of these two components to the river sediments. Our results are consistent with channel and gully erosion being the dominant source of sediment, with more than 90% of sediment transported along the main stem of these rivers originating from subsoil. We summarize the findings of similar studies on tropical Australian rivers and conclude that the primary source of sediment delivered to these systems is gully and channel bank erosion. Previously, as a result of catchment scale modelling, sheet-wash and rill erosion was considered to be the major sediment source in these rivers. Identifying the relative importance of sediment sources, as shown in this paper, will provide valuable information for land management planning in the region. This study also reinforces the importance of testing model predictions before they are used to target investment in remedial action.

Magnesium-rich minerals in sediment and suspended particulates of South Florida water bodies: implications for turbidity.

PubMed

Harris, W G; Fisher, M M; Cao, X; Osborne, T; Ellis, L

2007-01-01

Fine sediments in shallow water bodies such as Lake Okeechobee are prone to resuspension. Predominantly inorganic "mud" sediment that covers approximately 670 km2 of the lake has been recognized as a persistent source of turbidity. The objective of this study was to determine if mineral components of sediments in Lake Okeechobee and water conveyances of the northern Everglades also occur as suspended sediment and hence constitute a potential abiotic contributor to turbidity. Sediment samples were collected from nine stations within the lake and eight locations north of Water Conservation Area 2A in the Everglades. Water samples were also collected at selected locations. The silt and clay mineralogy of sediment and suspended particles was determined using X-ray diffraction, thermogravimetry, scanning-electron microscopy, energy-dispersive X-ray elemental microanalysis, and high-resolution transmission-electron microscopy. Clay fractions of the lake sediment contained the Mg silicate minerals sepiolite and palygorskite, along with smectite, dolomite, calcite, and kaolinite. Sediment silt fractions were dominated by carbonates and/or quartz, with smaller amounts of Ca phosphates and sepiolite. Mineralogy of the mud sediment was similar to that reported for geologic phosphate deposits. This suggests that the mud sediment might have accumulated by stream transport of minerals from these deposits. Suspended solids and mud-sediment mineralogy were similar, except that smectite was more abundant in suspended solids. Everglade samples also contained Mg-rich minerals. The small size, low density, and fibrous or platy nature of the prevalent mud sediment minerals make them an abiotic, hydrodynamically sensitive source of persistent turbidity in a shallow lake. Mitigation efforts focused exclusively on P-induced biogeochemical processes do not address the origin or effects of these minerals. Ecological management issues such as turbidity control, P retention, geologic P input, and suitability of dredging are related to mud-sediment properties and provenance.

Chemical fractionation of lake sediments to determine the effects of land-use change on nutrient loading

NASA Astrophysics Data System (ADS)

Heathwaite, A. L.

1994-07-01

Lake studies allow contemporary sediment and nutrient dynamics to be placed in a historical context in order that trends and rates of change in catchment inputs may be calculated. Here, a synthesis of the temporal information contained in catchment and lake sediment records is attempted. A chemical fractionation technique is used to isolate the different sediment sources contained in the lake core, and 210Pb dates provide an accurate record of changes in lake sediment sources over the past 100 years. The extent to which land-use records, collated from agricultural census returns, and process-based studies of sediment and nutrient export from different catchment land uses can be used to explain the trends observed in the lake sediments is examined. Sediment influx to the study lake has increased from less than 2 mm year -1 prior to the Second World War to over 10 mm year -1 at present. The source of the sediment is largely unaltered and unweathered allochthonous material eroded from the catchment. Land-use records suggest that the intensification of agriculture, characterized by a shift towards arable land immediately postwar, followed by an increase in the area of temporary grass in the 1960s, may be the cause of accelerated catchment erosion; both land-use changes would have increased the area of ploughed land in the catchment. An increase in the number of cattle and sheep in the catchment from around 2000 and 6000, respectively, in the 1940s, to a peak of nearly 7000 cattle and over 15 000 sheep in the 1980s, provides a further source of sediment and nutrients. Livestock are grazed on permanent grassland which is commonly located on steep hillslopes and in riparian zones where saturation-excess surface runoff may be an important hydrological pathway. Rainfall simulation experiments show that surface runoff from heavily grazed grassland has a high suspended sediment, ammonium-nitrogen and particulate phosphorus load. The combined effect of the long-term increase in the organic loading from livestock and the inorganic N and P load from fertilizers, may be the source of nutrient enrichment in the lake.

Characteristics of Heavy Metals and Pb Isotopic Composition in Sediments Collected from the Tributaries in Three Gorges Reservoir, China

PubMed Central

Gao, Bo; Zhou, Huaidong; Huang, Yong; Wang, Yuchun; Gao, Jijun; Liu, Xiaobo

2014-01-01

The concentrations, distribution, accumulation, and potential ecological risk of heavy metals (Cr, Cu, Zn, Ni, As, Pb, Cd, and Hg) in sediments from the Three Gorges Reservoir (TGR) tributaries were determined and studied. Pb isotopic compositions in sediments were also measured to effectively identify the potential Pb sources. The results showed that the average concentrations of heavy metals in sediment of TGR tributaries were higher than the local background values of soils and sediments in China. The assessment by Geoaccumulation Index indicated that Cu, Ni, and Hg were at the “slightly polluted” level and Cd was ranked as the “moderately polluted” level in tributary sediments of TGR. The assessment by Potential Ecological Risk Index showed that Hg and Cd were the predominant elements in tributary sediments in TGR. The Pb isotopic ratios in sediments varied from 1.171 to 1.202 for 206Pb/207Pb and from 2.459 to 2.482 for 208Pb/207Pb in TGR. All Pb isotopic ratios in sediments were similar to those from coal combustion, lead ores (the mining activities and smelting process), and cement material, indicating that these anthropogenic inputs may be the main sources for Pb pollution in sediments of TGR tributaries. PMID:24624045

Geologic processes influence the effects of mining on aquatic ecosystems

USGS Publications Warehouse

Schmidt, Travis S.; Clements, William H.; Wanty, Richard B.; Verplanck, Philip L.; Church, Stan E.; San Juan, Carma A.; Fey, David L.; Rockwell, Barnaby W.; DeWitt, Ed H.; Klein, Terry L.

2012-01-01

Geologic processes strongly influence water and sediment quality in aquatic ecosystems but rarely are geologic principles incorporated into routine biomonitoring studies. We test if elevated concentrations of metals in water and sediment are restricted to streams downstream of mines or areas that may discharge mine wastes. We surveyed 198 catchments classified as “historically mined” or “unmined,” and based on mineral-deposit criteria, to determine whether water and sediment quality were influenced by naturally occurring mineralized rock, by historical mining, or by a combination of both. By accounting for different geologic sources of metals to the environment, we were able to distinguish aquatic ecosystems limited by metals derived from natural processes from those due to mining. Elevated concentrations of metals in water and sediment were not restricted to mined catchments; depauperate aquatic communities were found in unmined catchments. The type and intensity of hydrothermal alteration and the mineral deposit type were important determinants of water and sediment quality as well as the aquatic community in both mined and unmined catchments. This study distinguished the effects of different rock types and geologic sources of metals on ecosystems by incorporating basic geologic processes into reference and baseline site selection, resulting in a refined assessment. Our results indicate that biomonitoring studies should account for natural sources of metals in some geologic environments as contributors to the effect of mines on aquatic ecosystems, recognizing that in mining-impacted drainages there may have been high pre-mining background metal concentrations.

Detection of recycled marine sediment components in crater lake fluids using 129I

NASA Astrophysics Data System (ADS)

Fehn, U.; Snyder, G. T.; Varekamp, J. C.

2002-06-01

Crater lakes provide time-integrated samples of volcanic fluids, which may carry information on source components. We tested under what circumstances 129I concentrations can be used for the detection of a signal derived from the recycling of marine sediments in subduction zone magmatism. The 129I system has been successfully used to determine origin and pathways in other volcanic fluids, but the application of this system to crater lakes is complicated by the presence of anthropogenic 129I, related to recent nuclear activities. Results are reported from four crater lakes, associated with subducting crust varying in age between 23 and 98 Ma. The 129I/I ratios determined for Copahue, Argentina, (129I/I=700×10-15) and White Island, New Zealand, (129I/I=284×10-15) demonstrate the presence of iodine in the crater lakes that was derived from recycled marine sediments. A comparison to the ages of the subducted sediments in these two cases indicates that the ratios likely reflect iodine remobilization from the entire sediment column that was undergoing subduction. While the 129I signals in Poás and Rincón de la Vieja, Costa Rica also demonstrate the presence of recycled iodine, the relatively high percentage of meteoric water in these lakes prevents a reliable determination of source ages. The observed high concentrations of iodine and 129I/I ratios substantially below current surface values strongly argue for the presence of recycled marine components in the arc magmas of all four cases. Components from subducted marine sediments can be quantified and related to specific parts of the sediment column in cases where the iodine concentration in the lake waters exceeds 5 μM.

Isotopic identification of natural vs. anthropogenic lead sources in marine sediments from the inner Ría de Vigo (NW Spain).

PubMed

Álvarez-Iglesias, P; Rubio, B; Millos, J

2012-10-15

San Simón Bay, the inner part of the Ría de Vigo (NW Spain), an area previously identified as highly polluted by Pb, was selected for the application of Pb stable isotope ratios as a fingerprinting tool in subtidal and intertidal sediment cores. Lead isotopic ratios were determined by inductively coupled plasma mass spectrometry on extracts from bulk samples after total acid digestion. Depth-wise profiles of (206)Pb/(207)Pb, (206)Pb/(204)Pb, (207)Pb/(204)Pb, (208)Pb/(204)Pb and (208)Pb/(207)Pb ratios showed, in general, an upward decrease for both intertidal and subtidal sediments as a consequence of the anthropogenic activities over the last century, or centuries. Waste channel samples from a nearby ceramic factory showed characteristic Pb stable isotope ratios different from those typical of coal and petrol. Natural isotope ratios from non-polluted samples were established for the study area, differentiating sediments from granitic or schist-gneiss sources. A binary mixing model employed on the polluted samples allowed estimating the anthropogenic inputs to the bay. These inputs represented between 25 and 98% of Pb inputs in intertidal samples, and 9-84% in subtidal samples, their contributions varying with time. Anthropogenic sources were apportioned according to a three-source model. Coal combustion-related emissions were the main anthropogenic source Pb to the bay (60-70%) before the establishment of the ceramic factory in the area (in the 1970s) which has since constituted the main source (95-100%), followed by petrol-related emissions. The Pb inputs history for the intertidal area was determined for the 20th century, and, for the subtidal area, the 19th and 20th centuries. Copyright © 2012 Elsevier B.V. All rights reserved.

Loosely bound oxytetracycline in riverine sediments from two tributaries of the Chesapeake Bay

USGS Publications Warehouse

Simon, N.S.

2005-01-01

The fate of antibiotics that bind to riverine sediment is not well understood. A solution used in geochemical extraction schemes to determine loosely bound species in sediments, 1 M MgCl2 (pH 8), was chosen to determine loosely bound, and potentially bioavailable, tetracycline antibiotics (TCs), including oxytetracycline (5-OH tetracycline) (OTC) in sediment samples from two rivers on the eastern shore of the Chesapeake Bay. Bottom sediments were collected at sites upstream from, at, and downstream from municipal sewage-treatment plants (STPs) situated on two natural waterways, Yellow Bank Stream, MD, and the Pocomoke River, MD. Concentrations of easily desorbed OTC ranged from 0.6 to approximately 1.2 ??g g-1 dry wt sediment in Yellow Bank Stream and from 0.7 to approximately 3.3 ??g g-1 dry wt sediment in the Pocomoke River. Concentrations of easily desorbable OTC were generally smaller in sediment upstream than in sediment downstream from the STP in the Pocomoke River. STPs and poultry manure are both potential sources of OTC to these streams. OTC that is loosely bound to sediment is subject to desorption. Other researchers have found desorbed TCs to be biologically active compounds.

Alternative method to trace sediment sources in a subtropical rural catchment of southern Brazil by using near-infrared spectroscopy

NASA Astrophysics Data System (ADS)

Tiecher, Tales; Caner, Laurent; Gomes Minella, Jean Paolo; Henrique Ciotti, Lucas; Antônio Bender, Marcos; dos Santos Rheinheimer, Danilo

2014-05-01

Conventional fingerprinting methods based on geochemical composition still require a time-consuming and critical preliminary sample preparation. Thus, fingerprinting characteristics that can be measured in a rapid and cheap way requiring a minimal sample preparation, such as spectroscopy methods, should be used. The present study aimed to evaluate the sediment sources contribution in a rural catchment by using conventional method based on geochemical composition and on an alternative method based on near-infrared spectroscopy. This study was carried out in a rural catchment with an area of 1,19 km2 located in southern Brazil. The sediment sources evaluated were crop fields (n=20), unpaved roads (n=10) and stream channels (n=10). Thirty suspended sediment samples were collected from eight significant storm runoff events between 2009 and 2011. Sources and sediment samples were dried at 50oC and sieved at 63 µm. The total concentration of Ag, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, La, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sb, Se, Sr, Ti, Tl, V and Zn were estimated by ICP-OES after microwave assisted digestion with concentrated HNO3 and HCl. Total organic carbon (TOC) was estimated by wet oxidation with K2Cr2O7 and H2SO4. The near-infrared spectra scan range was 4000 to 10000 cm-1 at a resolution of 2 cm-1, with 100 co added scans per spectrum. The steps used in the conventional method were: i) tracer selection based on Kruskal-Wallis test, ii) selection of the best set of tracers using discriminant analyses and finally iii) the use of a mixed linear model to calculate the sediment sources contribution. The steps used in the alternative method were i) principal component analyses to reduce the number of variables, ii) discriminant analyses to determine the tracer potential of the near-infrared spectroscopy, and finally iii) the use of past least square based on 48 mixtures of the sediment sources in various weight proportions to calculate the sediment sources contribution. Both conventional and alternative methods were capable to discriminate 100% of the sediment sources. Conventional fingerprinting method provided a sediment sources contribution of 33±19% by crop fields, 25±13% by unpaved roads and 42±19% by stream channels. The contribution of sediment sources obtained by alternative fingerprinting method using near-infrared spectroscopy was 71±22% of crop fields, 21±12% of unpaved roads and 14±19% of stream channels. No correlation was observed between source contribution assessed by the two methods. Notwithstanding, the average contribution of the unpaved roads was similar by both methods. The highest difference in the average contribution of crop fields and stream channels estimated by the two methods was due to similar organic matter content of these two sediment sources which hampers their discrimination by assessing the near-infrared spectra, where much of the bands are highly correlated with the TOC levels. Efforts should be taken to try to combine both the geochemical composition and near-infrared spectroscopy information on a single estimative of the sediment sources contribution.

Searching for the Source of Salt Marsh Buried Mercury.

NASA Astrophysics Data System (ADS)

Brooke, C. G.; Nelson, D. C.; Fleming, E. J.

2016-12-01

Salt marshes provide a barrier between upstream mercury contamination and coastal ecosystems. Mercury is sorbed, transported, and deposited in estuarine systems. Once the upstream mercury source has been remediated, the downstream mercury contaminated salt marsh sediments should become "capped" or buried by uncontaminated sediments preventing further ecosystem contamination. Downstream from a remediated mercury mine, an estuarine intertidal marsh in Tomales Bay, CA, USA, scavengers/predators (e.g. Pachygrapsus crassipes, Lined Shore Crab) have leg mercury concentrations as high as 5.5 ppm (dry wt./dry wt.), which increase significantly with crab size, a surrogate for trophic level. These elevated mercury concentrations suggests that "buried" mercury is rereleased into the environment. To locate possible sources of mercury release in Walker Marsh, we sampled a transect across the marsh that included diverse micro-environments (e.g. rhizoshere, stratified sediments, faunal burrows). From each location we determined the sediment structure, sediment color, total sediment mercury, total sediment iron, and microbial composition (n = 28). Where flora or fauna had perturbed the sediment, mercury concentrations were 10% less than undisturbed stratified sediments (1025 ppb vs. 1164 ppb, respectively). High-throughput SSU rRNA gene sequencing and subsequent co-occurrence network analysis genera indicated that in flora- or fauna- perturbed sediments there was an increased likelihood that microbial genera contained mercury mobilizing genes (94% vs 57%; in perturbed vs stratified sediments, respectively). Our observations are consistent with findings by others that in perturbed sites mercury mobility increased. We did however identify a microbial and geochemical profile with increased mercury mobility. For future work we plan to quantify the role these micro-environments have on mercury-efflux from salt marshes.

Rare earth elements in weathering profiles and sediments of Minnesota: Implications for provenance studies

USGS Publications Warehouse

Morey, G.B.; Setterholm, D.R.

1997-01-01

The relative abundance of rare earth elements in sediments has been suggested as a tool for determining their source rocks. This correlation requires that weathering, erosion, and sedimentation do not alter the REE abundances, or do so in a predictable manner. We find that the rare earth elements are mobilized and fractionated by weathering, and that sediments derived from the weathered materials can display modifications of the original pattern of rare earth elements of some due to grain-size sorting of the weathered material. However, the REE distribution pattern of the provenance terrane can be recognized in the sediments.

Characterizing relationships among fecal indicator bacteria ...

EPA Pesticide Factsheets

Bed sediments of streams and rivers may store high concentrations of fecal indicator bacteria (FIB) and pathogens. Due to resuspension events, these contaminants can be mobilized into the water column and affect overall water quality. Other bacterial indicators such as microbial source tracking (MST) markers, developed to determine potential sources of fecal contamination, can also be resuspended from bed sediments. The primary objective of this study was to predict occurrence of waterborne pathogens in water and streambed sediments using a simple statistical model that includes traditionally measured FIB, environmental parameters and source allocation, using MST markers as predictor variables. Synoptic sampling events were conducted during baseflow conditions downstream from agricultural (AG), forested (FORS), and wastewater pollution control plant (WPCP) land uses. Concentrations of FIB and MST markers were measured in water and sediments, along with occurrences of the enteric pathogens Campylobacter, Listeria and Salmonella, and the virulence gene that carries Shiga toxin, stx2. Pathogens were detected in water more often than in underlying sediments. Shiga toxin was significantly related to land use, with concentrations of the ruminant marker selected as an independent variable that could correctly classify 76% and 64% of observed Shiga toxin occurrences in water and sediment, respectively. FIB concentrations and water quality parameters were also selected a

Sources and turnover of organic carbon and methane in fjord and shelf sediments off northern Norway

NASA Astrophysics Data System (ADS)

Sauer, Simone; Hong, Wei-Li; Knies, Jochen; Lepland, Aivo; Forwick, Matthias; Klug, Martin; Eichinger, Florian; Baranwal, Soma; Crémière, Antoine; Chand, Shyam; Schubert, Carsten J.

2016-10-01

To better understand the present and past carbon cycling and transformation processes in methane-influenced fjord and shelf areas of northern Norway, we compared two sediment cores from the Hola trough and from Ullsfjorden. We investigated (1) the organic matter composition and sedimentological characteristics to study the sources of organic carbon (Corg) and the factors influencing Corg burial, (2) pore water geochemistry to determine the contribution of organoclastic sulfate reduction and methanogenesis to total organic carbon turnover, and (3) the carbon isotopic signature of hydrocarbons to identify the carbon transformation processes and gas sources. High sedimentation and Corg accumulation rates in Ullsfjorden support the notion that fjords are important Corg sinks. The depth of the sulfate-methane-transition (SMT) in the fjord is controlled by the supply of predominantly marine organic matter to the sediment. Organoclastic sulfate reduction accounts for 60% of the total depth-integrated sulfate reduction in the fjord. In spite of the presence of ethane, propane, and butane, we suggest a purely microbial origin of light hydrocarbons in the sediments based on their low δ13C values. In the Hola trough, sedimentation and Corg accumulation rates changed during the deglacial-to-post-glacial transition from approximately 80 cm ka-1 to erosion at present. Thus, Corg burial in this part of the shelf is presently absent. Low organic matter content in the sediment and low rates of organoclastic sulfate reduction (only 3% of total depth-integrated sulfate reduction) entail that the shallow depth of the SMT is controlled mostly by ascending thermogenic methane from deeper sources.

Grain size dependent magnetic discrimination of Iceland and South Greenland terrestrial sediments in the northern North Atlantic sediment record

NASA Astrophysics Data System (ADS)

Hatfield, Robert G.; Stoner, Joseph S.; Reilly, Brendan T.; Tepley, Frank J.; Wheeler, Benjamin H.; Housen, Bernard A.

2017-09-01

We use isothermal and temperature dependent in-field and magnetic remanence methods together with electron microscopy to characterize different sieved size fractions from terrestrial sediments collected in Iceland and southern Greenland. The magnetic fraction of Greenland silts (3-63 μm) and sands (>63 μm) is primarily composed of near-stoichiometric magnetite that may be oxidized in the finer clay (<3 μm) fractions. In contrast, all Icelandic fractions dominantly contain titanomagnetite of a range of compositions. Ferrimagnetic minerals preferentially reside in the silt-size fraction and exist as fine single-domain (SD) and pseudo-single-domain (PSD) size inclusions in Iceland samples, in contrast to coarser PSD and multi-domain (MD) discrete magnetites from southern Greenland. We demonstrate the potential of using magnetic properties of the silt fraction for source unmixing by creating known endmember mixtures and by using naturally mixed marine sediments from the Eirik Ridge south of Greenland. We develop a novel approach to ferrimagnetic source unmixing by using low temperature magnetic susceptibility curves that are sensitive to the different crystallinity and cation substitution characteristics of the different source regions. Covariation of these properties with hysteresis parameters suggests sediment source changes have driven the magnetic mineral variations observed in Eirik Ridge sediments since the last glacial maximum. These observations assist the development of a routine method and interpretative framework to quantitatively determine provenance in a geologically realistic and meaningful way and assess how different processes combine to drive magnetic variation in the North Atlantic sediment record.

Influence of Diagenesis on Bioavailable Phosphorus in Lake Mendota, USA

NASA Astrophysics Data System (ADS)

Hoffman, A.; Armstrong, D.; Lathrop, R.; Penn, M.

2013-12-01

Phosphorus (P) is a major driver of productivity in many freshwater systems and in excess P can cause a variety of deleterious effects. Lake Mendota, located in Madison, Wisconsin (USA), is a eutrophic calcareous lake that is influenced by both urban and agricultural sources. As measures have been implemented to control point and non-point source pollution, internal sources, including release by sediments, has become more important. We collected multiple sediment cores from seven depositional basins to determine how diagenesis is influencing the bioavailability of sediment P. Cores were sliced in 1-cm intervals and analyzed for total P (TP), various P fractions, total metals, and multiple stable isotopes. While the average amount of total P that was bioavailable was 64.8%, the range noted was 39.2% to 88.6%. Spatial differences existed among the cores when comparing TP and bioavailable P among the cores. Depth profiles elucidated temporal differences as occasional increases in TP with depth were noted. These increases were found to contain a higher percent of bioavailable P. This variation was explored to determine if it resulted from differences in source material, for example inorganic P formed by diagenesis of organic P (algal derived) rather than soil P from external inputs. Saturation index modeling using MINEQL+ suggests that phosphorus concentrations in Lake Mendota pore waters are influenced by precipitation of vivianite (Fe3(PO4)2●8H2O) and certain calcium phosphates. However, hydroxyl apatite (Ca5(PO4)3(OH)), was highly supersaturated, indicating that precipitation of hydroxyl apatite is hindered and not important in controlling phosphate concentrations in these sediments. Yet even more important than precipitation reactions, adsorption/desorption characteristics of P seem to play a major role in P bioavailability. Sediment 210Pb and 137Cs activity profiles indicate differences exist among sedimentation rates for the various depositional sites in Lake Mendota. Implications for the modeling of P cycling and changes in internal loading following external P reduction in lakes will be discussed.

Effects of pollution on the geochemical properties of marine sediments across the fringing reef of Aqaba, Red Sea.

PubMed

Al-Rousan, Saber; Al-Taani, Ahmed A; Rashdan, Maen

2016-09-15

The Gulf of Aqaba is of significant strategic and economic value to all gulf-bordering states, particularly to Jordan, where it provides Jordan with its only marine outlet. The Gulf is subject to a variety of impacts posing imminent ecological risk to its unique marine ecosystem. We attempted to investigate the status of metal pollution in the coastal sediments of the Jordanian Gulf of Aqaba. The distribution of Cd, Cr, Zn, Cu, Pb, Al, Fe, and Mn concentrations were determined in trapped and bottom-surface sediments at three selected sites at different depths. In addition, monthly sedimentation rates at varying water depths were also estimated at each sampling site using sediment traps. The high concentrations of Cd, Cr, Zn were recorded at the Phosphate Loading Birth (PLB) site followed by the Industrial Complex (IC) site indicating their dominant anthropogenic source (i.e., the contribution of industrial activities). However, Fe, Al, and Mn contents were related to inputs from the terrigenous (crustal) origin. Except for Al, Fe and Mn at the PLB site, the concentrations of metals exhibited a decreasing trend with increasing water depth (distance from the shoreline). The PLB site also showed the highest sedimentation rate which decreased with increasing water depth. The Enrichment factors (EFs) showed that Cd was the most enriched element in the sediment (indicating that Cd pollution is widespread), whereas the least enriched metal in sediments was Cu. EF values suggested that the coastal area is impacted by a combination of human and natural sources of metals, where the anthropogenic sources are intense in the PLB site (north of Gulf of Aqaba). The MSS area is potentially the least polluted, consistent with being a marine reserve. The IC sediments have been found to be impacted by human activities but less intensely compared to the PLB area. These results suggested that there are two sources of metals in sediments; the primary source is likely closer to PLB, while the secondary is nearby the IC. Copyright © 2016 Elsevier Ltd. All rights reserved.

Arsenic in sediments, groundwater, and streamwater of a glauconitic Coastal Plain terrain, New Jersey, USA-Chemical " fingerprints" for geogenic and anthropogenic sources

USGS Publications Warehouse

Barringer, J.L.; Reilly, P.A.; Eberl, D.D.; Blum, A.E.; Bonin, J.L.; Rosman, R.; Hirst, B.; Alebus, M.; Cenno, K.; Gorska, M.

2011-01-01

Glauconite-bearing deposits are found worldwide, but As levels have been determined for relatively few. The As content of glauconites in sediments of the Inner Coastal Plain of New Jersey can exceed 100mg/kg, and total As concentrations (up to 5.95??g/L) found historically and recently in streamwaters exceed the State standard. In a major watershed of the Inner Coastal Plain, chemical " fingerprints" were developed for streambed sediments and groundwater to identify contributions of As to the watershed from geologic and anthropogenic sources. The fingerprint for streambed sediments, which included Be, Cr, Fe and V, indicated that As was predominantly of geologic origin. High concentrations of dissolved organic C, nutrients (and Cl-) in shallow groundwater indicated anthropogenic inputs that provided an environment where microbial activity released As from minerals to groundwater discharging to the stream. Particulates in streamwater during high flow constituted most of the As load; the chemical patterns for these particulates resembled the geologic fingerprint of the streambed sediments. The As/Cr ratio of these suspended particles likely indicates they derived not only from runoff, but from groundwater inputs, because As contributed by groundwater is sequestered on streambed sediments. Agricultural inputs of As were not clearly identified, although chemical characteristics of some sediments indicated vehicle-related inputs of metals. Sediment sampling during dry and wet years showed that, under differing hydrologic conditions, local anthropogenic fingerprints could be obscured but the geologic fingerprint, indicating glauconitic sediments as an As source, was robust. ?? 2011.

The anti-estrogenic activity of sediments from agriculturally-intense watersheds: Assessment using in vivo and in vitro assays

PubMed Central

Sellin Jeffries, Marlo K.; Conoan, Nicholas H.; Cox, Marc B.; Sangster, Jodi L.; Balsiger, Heather A.; Bridges, Andrew A.; Cowman, Tim; Knight, Lindsey A.; Bartelt-Hunt, Shannon L.; Kolok, Alan S.

2015-01-01

The goal of the current study was to determine whether sediments from agriculturally-intense watersheds can act as a potential source of anti-estrogenic endocrine-disrupting compounds. The specific objectives of the current study were to determine 1) whether female fathead minnows (Pimephales promelas) experience alterations in endocrine function when exposed to sediments collected from agriculturally-intense watersheds and 2) if these sediments display anti-estrogenic activity in an in vitro assay. In addition, sediment samples were analyzed for the presence of steroid hormones and pesticides associated with local agricultural practices. To accomplish this, sediments and water were collected from three sites within two agriculturally-intense Nebraska watersheds (Bow Creek and the Elkhorn River). In 2009, minnows were exposed to sediment and/or water collected from the two Bow Creek sites (East Bow Creek and the Confluence) in the laboratory, while in 2010, minnows were exposed to sediment and/or water from East Bow Creek, the Confluence and the Elkhorn River. Following the 7-d exposure period, the hepatic mRNA expression of two-estrogen responsive genes, estrogen receptor α (ERα) and vitellogenin (Vtg) was determined. In 2009, females exposed to Confluence sediments, in the presence of laboratory water or Confluence water, experienced significant reductions in ERα expression relative to unexposed and Confluence water-exposed females. The defeminization of these females suggests the presence of a biologically-available anti-estrogenic compound in sediments collected from this site. In 2010, sediments were assessed for anti-estrogenic activity on days 0 and 7 of the exposure period using a four-hour yeast estrogen screen. Lipophilic extracts (LEs) of day 0 sediments collected from the Confluence and the Elkhorn River induced significant reductions in the estrogenic reporter activity of treated yeast cultures suggesting the presence of a lipophilic anti-estrogenic compound in these extracts. Chemical analysis revealed the presence of a variety of steroid hormones, including those associated with the production of beef cattle (ie: β-trenbolone, α-zearalanol and α-zearalenol), in sediments indicating that compounds utilized by local beef cattle operations are capable of entering nearby watersheds. Overall, the results of this study indicate that an environmentally-relevant anti-estrogenic compound is present in sediments from agriculturally-intense watersheds and that this compound is bioavailable to fish. Furthermore, the presence of steroid hormones in sediments from these watersheds provides evidence indicating that steroids are capable of sorbing to sediments. Clearly, sediments are capable of acting as a source of endocrine-disrupting compounds in the aquatic environment. PMID:21723217

Determination and partitioning of metals in sediments along the Suez Canal by sequential extraction

NASA Astrophysics Data System (ADS)

Abd El-Azim, H.; El-Moselhy, Kh. M.

2005-06-01

The application of sequential extraction technique was used to determine the chemical association of heavy metals in five different chemical phases (exchangeable F1, bound to carbonate F2, bound to Fe-Mn oxides F3, bound to organic matter F4 and residual F5) for sediment samples collected from the Suez Canal. From the obtained data, it can be seen that the surplus of metal contaminants introduced into the sediment from sources usually exists in relatively unstable chemical forms. A high proportion of the studied metals remained in the residual fraction. Most of remaining portion of metals was bound to ferromanganese oxides fraction. The low concentrations of metals in the exchangeable fraction indicated that the sediments of Suez Canal were relatively unpolluted.

Sources and sinks of microplastics in Canadian Lake Ontario nearshore, tributary and beach sediments.

PubMed

Ballent, Anika; Corcoran, Patricia L; Madden, Odile; Helm, Paul A; Longstaffe, Fred J

2016-09-15

Microplastics contamination of Lake Ontario sediments is investigated with the aim of identifying distribution patterns and hotspots in nearshore, tributary and beach depositional environments. Microplastics are concentrated in nearshore sediments in the vicinity of urban and industrial regions. In Humber Bay and Toronto Harbour microplastic concentrations were consistently >500 particles per kg dry sediment. Maximum concentrations of ~28,000 particles per kg dry sediment were determined in Etobicoke Creek. The microplastic particles were primarily fibres and fragments <2mm in size. Both low- and high-density plastics were identified using Raman spectroscopy. We provide a baseline for future monitoring and discuss potential sources of microplastics in terms of how and where to implement preventative measures to reduce the contaminant influx. Although the impacts of microplastics contamination on ecosystem health and functioning is uncertain, understanding, monitoring and preventing further microplastics contamination in Lake Ontario and the other Great Lakes is crucial. Copyright © 2016 Elsevier Ltd. All rights reserved.

Organochlorine compounds and polycyclic aromatic hydrocarbons in surface sediment from Baiyangdian Lake, North China: concentrations, sources profiles and potential risk.

PubMed

Hu, Guocheng; Luo, Xiaojun; Li, Fengchao; Dai, Jiayin; Guo, Jianyang; Chen, Shejun; Hong, Cao; Mai, Bixian; Xu, Muqi

2010-01-01

Organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) were determined in nineteen surface sediment samples collected from Baiyangdian Lake and its inflowing river (Fuhe River) in North China. Total concentrations of OCPs, PCBs and PAHs in sediments ranged from 5.4 to 707.6 ng/g, 2.3 to 197.8 ng/g, and 101.3 to 6360.5 ng/g, respectively. The levels of contaminants in Fuhe River were significantly higher than those in Baiyandian Lake. For hexachlorocyclohexane (HCHs) and dichlorodiphenytrichloroethanes (DDTs), alpha-HCH and p,p'-DDT were predominant isomers; while for PCBs, PCB 28/31, PCB 40/103, PCB 60, PCB 101, and PCB 118 were predominant congeners. Possible sources derived from historical usage for OCPs and incomplete combustion fuel, wood, and coal and exhaustion of boats or cars for PAHs. Risk assessment of sediment indicated that sediments in Fuhe River were likely to pose potential biological adverse impact.

Sediment Quality and Comparison to Historical Water Quality, Little Arkansas River Basin, South-Central Kansas, 2007

USGS Publications Warehouse

Juracek, Kyle E.; Rasmussen, Patrick P.

2008-01-01

The spatial and temporal variability in streambed-sediment quality and its relation to historical water quality was assessed to provide guidance for the development of total maximum daily loads and the implementation of best-management practices in the Little Arkansas River Basin, south-central Kansas. Streambed-sediment samples were collected at 26 sites in 2007, sieved to isolate the less than 63-micron fraction (that is, the silt and clay), and analyzed for selected nutrients (total nitrogen and total phosphorus), organic and total carbon, 25 trace elements, and the radionuclides beryllium-7, cesium-137, lead-210, and radium-226. At eight sites, streambed-sediment samples also were collected and analyzed for bacteria. Particulate nitrogen, phosphorus, and organic carbon concentrations in the streambed sediment varied substantially spatially and temporally, and positive correlations among the three constituents were statistically significant. Along the main-stem Little Arkansas River, streambed-sediment concentrations of particulate nitrogen and phosphorus generally were larger at and downstream from Alta Mills, Kansas. The largest particulate nitrogen concentrations were measured in samples collected in the Emma Creek subbasin and may be related to livestock and poultry production. The largest particulate phosphorus concentrations in the basin were measured in samples collected along the main-stem Little Arkansas River downstream from Alta Mills, Kansas. Particulate nitrogen, phosphorus, and organic carbon content in the water and streambed-sediment samples typically decreased as streamflow increased. This inverse relation may be caused by an increased contribution of sediment from channel-bank sources during high flows and (or) increased particle sizes transported by the high flows. Trace element concentrations in the streambed sediment varied from site to site and typically were less than threshold-effects guidelines for possible adverse biological effects. The largest copper, lead, silver, and zinc concentrations, measured for a sample collected from Sand Creek downstream from Newton, Kansas, likely were related to urban sources of contamination. Radionuclide activities and bacterial densities in the streambed sediment varied throughout the basin. Variability in the former may be indicative of subbasin differences in the contribution of sediment from surface-soil and channel-bank sources. Streambed sediment may be useful for reconnaissance purposes to determine sources of particulate nitrogen, phosphorus, organic carbon, and other sediment-associated constituents in the basin. If flow conditions prior to streambed-sediment sampling and during water-quality sampling are considered, it may be possible to use streambed sediment as an indicator of water quality for nitrogen, phosphorus, and organic carbon. Flow conditions affect sediment-associated constituent concentrations in streambed-sediment and water samples, in part, because the sources of sediment (surface soils, channel banks) can vary with flow as can the size of the particles transported.

Eocene Unification of Peruvian and Bolivian Altiplano Basin Depocenters

NASA Astrophysics Data System (ADS)

Saylor, J.; Sundell, K. E.; Perez, N.; Karsky, N.; Lapen, T. J.; Cárdenas, J.

2017-12-01

Paleogene evolution of the Altiplano basin has been characterized as a flexural foreland basin which developed in response to magmatic and thrust loading along its western margin. Research focused in southern Peru and Bolivia points to broadly synchronous foredeep deposition in a basin assumed to be have been contiguous from at least 14°-23°S. We investigated Paleogene strata exposed on the southwestern margin of Lake Titicaca near the Peru/Bolivia border in order to establish sediment dispersal systems, sediment sources, and the chronology of deposition. A data set of >1,000 paleocurrent measurements throughout the section consistently indicates a western sediment source. The results of detrital zircon mixture modeling are consistent with derivation from Cretaceous volcanic sources, and Cretaceous and Ordovician sedimentary strata exposed in the Western Cordillera. These results confirm previous models in which sedimentary sources for the Altiplano basin are dominated by the Western Cordillera throughout the Paleogene. The detrital zircon signatures from strata in this stratigraphic section where paleocurrent orientation is well constrained provide a benchmark for future research seeking to determine sediment sources for the Altiplano basin. However, refined chronologies based on detrital zircon U-Pb maximum depositional ages (MDAs) point to development of at least two Paleocene depocenters in Peru and Bolivia separated by a zone of nondeposition or erosion in southern Peru. The basal Muñani Formation in southern Peru yields MDAs of 36.9-40.2 Ma, which requires revision of the previously determined middle Paleocene onset of deposition. The Muñani Formation overlies the Vilquechico Group which has been biostratigraphically determined to range from Campanian-Maastrichtian (or possibly Paleocene, 60 Ma). The revised chronology for the Muñani Formation requires a disconformity of at least 20 Myr during which deposition continued in both the Peruvian and Bolivian depocenters of the Paleogene Altiplano foreland basin. This requires that the Altiplano basin initiated as separate basins, and only unified at 36-40 Ma.

Shoreline erosion and decadal sediment accumulation in the Tar-Pamlico estuary, North Carolina, USA: A source-to-sink analysis

NASA Astrophysics Data System (ADS)

Eulie, Devon O.; Corbett, D. Reide; Walsh, J. P.

2018-03-01

Estuaries contain vital habitats and it is important to understand how these areas respond to human activities and natural processes such as sea-level rise and wave attack. As estuarine shorelines erode or become modified with hard structures, there is potential for significantly altering the availability of sediment and the filling of coastal systems. This study used a source-to-sink approach and quantified rates of shoreline erosion in the Tar-Pamlico sub-estuary, a tributary of the larger Albemarle-Pamlico Estuarine System (APES). The average shoreline change rate (SCR) determined using an end-point method was -0.5 ± 0.9 m yr-1 for the Tar-Pamlico. Incorporating bulk density estimates, this contributes 0.6 × 105 tons of fine sediment to the system annually, or after accounting for fluvial input, about 40% of the total sediment supply to the sub-estuary. The role of the Tar-Pamlico as a sink for these sediments was addressed using the radionuclide tracers 210Pb and 137Cs. Radionuclide activities and sediment accumulation rates identified several depositional regions, in particular in the middle of the estuary. Linear sediment accumulation rates ranged from 0.10 ± 0.02 to 0.38 ± 0.02 g cm-2 yr-1, and total storage of fine sediment in the system was 1.6 × 105 t yr-1. It was not possible to confidently discern a change in the rate of shoreline erosion or seabed accumulation. A preliminary budget for fine sediments (grain-size <63 μm) was then calculated to compare erosional sources with sedimentary sinks. Almost all (∼93.0%) of the fine sediment entering the system was accumulated and stored, while only about 7.0% was exported to Pamlico Sound.

Selenium in Reservoir Sediment from the Republican River Basin

USGS Publications Warehouse

Juracek, Kyle E.; Ziegler, Andrew C.

1998-01-01

Reservoir sediment quality is an important environmental concern because sediment may act as both a sink and a source of water-quality constituents to the overlying water column and biota. Once in the food chain, sediment-derived constituents may pose an even greater concern due to bioaccumulation. An analysis of reservoir bottom sediment can provide historical information on sediment deposition as well as magnitudes and trends in constituents that may be related to changes in human activity in the basin. The assessment described in this fact sheet was initiated in 1997 by the U.S. Geological Survey (USGS), in cooperation with the Bureau of Reclamation (BOR), U.S. Department of the Interior, to determine if irrigation activities have affected selenium concentrations in reservoir sediment of the Republican River Basin of Colorado, Kansas, and Nebraska.

A Sr-Nd isotopic study of sand-sized sediment provenance and transport for the San Francisco Bay coastal system

USGS Publications Warehouse

Rosenbauer, Robert J.; Foxgrover, Amy C.; Hein, James R.; Swarzenski, Peter W.; Barnard, P.L.; Jaffee, B.E.; Schoellhamer, D.H.

2013-01-01

A diverse suite of geochemical tracers, including 87Sr/86Sr and 143Nd/144Nd isotope ratios, the rare earth elements (REEs), and select trace elements were used to determine sand-sized sediment provenance and transport pathways within the San Francisco Bay coastal system. This study complements a large interdisciplinary effort (Barnard et al., 2012) that seeks to better understand recent geomorphic change in a highly urbanized and dynamic estuarine-coastal setting. Sand-sized sediment provenance in this geologically complex system is important to estuarine resource managers and was assessed by examining the geographic distribution of this suite of geochemical tracers from the primary sources (fluvial and rock) throughout the bay, adjacent coast, and beaches. Due to their intrinsic geochemical nature, 143Nd/144Nd isotopic ratios provide the most resolved picture of where sediment in this system is likely sourced and how it moves through this estuarine system into the Pacific Ocean. For example, Nd isotopes confirm that the predominant source of sand-sized sediment to Suisun Bay, San Pablo Bay, and Central Bay is the Sierra Nevada Batholith via the Sacramento River, with lesser contributions from the Napa and San Joaquin Rivers. Isotopic ratios also reveal hot-spots of local sediment accumulation, such as the basalt and chert deposits around the Golden Gate Bridge and the high magnetite deposits of Ocean Beach. Sand-sized sediment that exits San Francisco Bay accumulates on the ebb-tidal delta and is in part conveyed southward by long-shore currents. Broadly, the geochemical tracers reveal a complex story of multiple sediment sources, dynamic intra-bay sediment mixing and reworking, and eventual dilution and transport by energetic marine processes. Combined geochemical results provide information on sediment movement into and through San Francisco Bay and further our understanding of how sustained anthropogenic activities which limit sediment inputs to the system (e.g., dike and dam construction) as well as those which directly remove sediments from within the Bay, such as aggregate mining and dredging, can have long-lasting effects

Storms, channel changes, and a sediment budget for an urban-suburban stream, Difficult Run, Virginia, USA

USGS Publications Warehouse

Gellis, Allen C.; Myers, Michael; Noe, Gregory; Hupp, Cliff R.; Shenk, Edward; Myers, Luke

2017-01-01

Determining erosion and deposition rates in urban-suburban settings and how these processes are affected by large storms is important to understanding geomorphic processes in these landscapes. Sediment yields in the suburban and urban Upper Difficult Run are among the highest ever recorded in the Chesapeake Bay watershed, ranging from 161 to 376 Mg/km2/y. Erosion and deposition of streambanks, channel bed, and bars and deposition of floodplains were monitored between 1 March 2010 and 18 January 2013 in Upper Difficult Run, Virginia, USA. We documented the effects of two large storms, Tropical Storm Lee (September 2011), a 100-year event, and Super Storm Sandy (October 2012) a 5-year event, on channel erosion and deposition. Variability in erosion and deposition rates for all geomorphic features, temporally and spatially, are important conclusions of this study. Tropical Storm Lee was an erosive event, where erosion occurred on 82% of all streambanks and where 88% of streambanks that were aggrading before Tropical Storm Lee became erosional. Statistical analysis indicated that drainage area explains linear changes (cm/y) in eroding streambanks and that channel top width explains cross-sectional area changes (cm2/y) in eroding streambanks and floodplain deposition (mm/y). A quasi-sediment budget constructed for the study period using the streambanks, channel bed, channel bars, and floodplain measurements underestimated the measured suspended-sediment load by 61% (2130 Mg/y). Underestimation of the sediment load may be caused by measurement errors and to contributions from upland sediment sources, which were not measured but estimated at 36% of the gross input of sediment. Eroding streambanks contributed 42% of the gross input of sediment and accounted for 70% of the measured suspended-sediment load. Similar to other urban watersheds, the large percentage of impervious area in Difficult Run and direct runoff of precipitation leads to increased streamflow and streambank erosion. This study emphasizes the importance of streambanks in urban-suburban sediment budgets but also suggests that other sediment sources, such as upland sources, which were not measured in this study, can be an important source of sediment.

Source apportionment of Pb pollution in saltmarsh sediments from southwest England

NASA Astrophysics Data System (ADS)

Iurian, Andra-Rada; Millward, Geoffrey; Taylor, Alex; Marshall, William; Rodríguez, Javier; Gil Ibarguchi, José Ignacio; Blake, William H.

2017-04-01

The local availability of metal resources played a crucial role in Britain's development during the industrial revolution, but centuries of mining within Cornwall and Devon (UK) have left a legacy of contamination in river basin and estuary sediments. Improved knowledge of historical heavy metal sources, emissions and pathways will result in a better understanding of the contemporary pollution conditions and a better protection of the environment from legacy contaminants. Our study aims to trace historical sources of Pb pollution in the area of east Cornwall and west Devon, UK, using a multi proxy approach for contaminants stored in saltmarsh sediment columns from 3 systems characterized by different contamination patterns. Source apportionment investigations included the determination of Pb concentration and Pb isotopic composition (204Pb, 206Pb, 207Pb, and 208Pb) for selected down-core sediment samples, and for local ore and parent rock materials. General trends in pollutant loading (e.g. Pb) could be identified, with maximum inputs occurring in the middle of the 19th century and decreasing towards the present day, while an increase in the catchment disturbance was apparent for the last decades. The isotopic ratios of Pb further indicate that sediments with higher Pb content have a less radiogenic signature, these particular inputs being derived from Pb mining and smelting sources in the catchment area. Acknowledgements: Andra-Rada Iurian acknowledges the support of a Marie Curie Fellowship (H2020-MSCA-IF-2014, Grant Agreement number: 658863) within the Horizon 2020.

GenCade Lateral Boundary Conditions

DTIC Science & Technology

2017-01-01

13 Figure 4. Example pocket beach at Boston Bay, Portland Parish, Jamaica. Beach sediments are mainly locally derived...specify the sediment transport onto and off of each end of the grid. To determine the shoreline position of cell i at time-step “j+1,” (Figure 1...calculating the sediment transport across Cell Walls “i” and “i+1” [denoted as “Q(i,j)” and “Q(i+1,j)”] (plus adding in the user-defined sources and

Study of sediment movement in an irrigated maize-cotton system combining rainfall simulations, sediment tracers and soil erosion models

NASA Astrophysics Data System (ADS)

Guzmán, Gema; Laguna, Ana; Cañasveras, Juan Carlos; Boulal, Hakim; Barrón, Vidal; Gómez-Macpherson, Helena; Giráldez, Juan Vicente; Gómez, José Alfonso

2015-05-01

Although soil erosion is one of the main threats to agriculture sustainability in many areas of the world, its processes are difficult to measure and still need a better characterization. The use of iron oxides as sediment tracers, combined with erosion and mixing models opens up a pathway for improving the knowledge of the erosion and redistribution of soil, determining sediment sources and sinks. In this study, magnetite and a multivariate mixing model were used in rainfall simulations at the micro-plot scale to determine the source of the sediment at different stages of a furrow-ridge system both with (+T) and without (-T) wheel tracks. At a plot scale, magnetite, hematite and goethite combined with two soil erosion models based on the kinematic wave approach were used in a sprinkler irrigation test to study trends in sediment transport and tracer dynamics along furrow lengths under a wide range of scenarios. In the absence of any stubble cover, sediment contribution from the ridges was larger than the furrow bed one, almost 90%, while an opposite trend was observed with stubble, with a smaller contribution from the ridge (32%) than that of the bed, at the micro-plot trials. Furthermore, at a plot scale, the tracer concentration analysis showed an exponentially decreasing trend with the downstream distance both for sediment detachment along furrows and soil source contribution from tagged segments. The parameters of the distributed model KINEROS2 have been estimated using the PEST Model to obtain a more accurate evaluation. Afterwards, this model was used to simulate a broad range of common scenarios of topography and rainfall from commercial farms in southern Spain. Higher slopes had a significant influence on sediment yields while long furrow distances allowed a more efficient water use. For the control of runoff, and therefore soil loss, an equilibrium between irrigation design (intensity, duration, water pattern) and hydric needs of the crops should be defined in order to establish a sustainable management strategy.

A Handbook for Determining the Sources of PCB Contamination in Sediments

DTIC Science & Technology

2012-10-01

identifying sources for initial source control to later use for remedial cost apportionment . Often, forensic investigations are successfully used to...alteration processes, source apportionment can be difficult. For instance, one can easily imagine an onshore spill or source of PCB oil that results in a...the use of Aroclor analyses for identifying contamination sources to only fresh samples (for example, PCB oils or soils with freshly spilled PCB

Assessment of Heavy Metal Contamination in Marine Sediments of East Coast of Tamil Nadu Affected by Different Pollution Sources.

PubMed

Harikrishnan, N; Ravisankar, R; Chandrasekaran, A; Suresh Gandhi, M; Kanagasabapathy, K V; Prasad, M V R; Satapathy, K K

2017-08-15

The aim of this study was to determine the concentration of heavy metals in the sediments of Periyakalapet to Parangipettai coast, east coast of Tamil Nadu, by using energy-dispersive X-ray fluorescence (EDXRF) technique. The average heavy metal concentrations in the sediment samples were found in the order Al>Fe>Ca>Ti>K>Mg>Mn>Ba>V>Cr>Zn>La>Ni>Pb>Co>Cd>Cu. The average heavy metal concentrations were below the world crustal average. The degree of contamination by heavy metals was evaluated using pollution indices. The results of pollution indices revealed that titanium (Ti) and cadmium (Cd) were significantly enriched in sediments. Pearson correlation analysis was performed among heavy metal concentrations to know the existing relationship between them. Multivariate statistical technique was employed to identify the heavy metal pollution sources. Copyright © 2017 Elsevier Ltd. All rights reserved.

A rapid compatibility analysis of potential offshore sand sources for beaches of the Santa Barbara Littoral Cell

USGS Publications Warehouse

Mustain, N.; Griggs, G.; Barnard, P.L.

2007-01-01

The beaches of the Santa Barbara Littoral Cell, which are narrow as a result of either natural and/or anthropogenic factors, may benefit from nourishment. Sand compatibility is fundamental to beach nourishment success and grain size is the parameter often used to evaluate equivalence. Only after understanding which sand sizes naturally compose beaches in a specific cell, especially the smallest size that remains on the beach, can the potential compatibility of source areas, such as offshore borrow sites, be accurately assessed. This study examines sediments on the beach and in the nearshore (5-20m depth) for the entire Santa Barbara Littoral Cell east of Point Conception. A digital bed sediment camera, the Eyeball??, and spatial autocorrelation technique were used to determine sediment grain size. Here we report on whether nearshore sediments are comparable and compatible with beach sands of the Santa Barbara Littoral Cell. ?? 2007 ASCE.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mouser, Paula J.; N'Guessan, A. Lucie; Qafoku, Nikolla

The capacity for subsurface sediments to sequester metal contaminants, such as uranium (U), and retain them after bioremediation efforts are completed is critical to site stewardship. Sediments enriched in natural organic matter are capable of sequestering significant quantities of U, but may also serve as sources to the aquifer, contributing to plume persistence. Two types of sediments were compared to better understand the mechanisms contributing to the sequestration and release of U in the presence of organic matter. Artificially bioreduced sediments were retrieved from a field experimental plot previously stimulated with acetate while naturally bioreduced sediments were collected from amore » location enriched in organic matter but never subject to acetate amendment. Batch incubations demonstrated that the artificially bioreduced sediments were primed to rapidly remove uranium from the groundwater whereas naturally bioreduced sediments initially released a sizeable portion of sediment U before U(VI)-removal commenced. Column experiments confirmed that U release persisted for 65 pore volumes in naturally bioreduced sediments, demonstrating the sink-source behavior of this sediment. Acetate addition to artificially bioreduced sediments shifted the microbial community from one dominated by sulfate-reducing bacteria within Desulfobacteraceae to the iron-reducing family Geobacteraceae and Firmicutes during U(VI) reduction. In contrast, initial Geobacteraceae communities innaturally reduced sediments were replaced by clone sequences with similarity to opportunistic Pseudomonas spp. during U release, while U(VI) removal occurred concurrent with enrichment of Firmicutes. These investigations stress the importance of characterizing zones with heterogeneous carbon pools at U contaminated sites prior to the determination of a remedial strategy.« less

Phosphorus in sediment in the Kent Park Lake watershed, Johnson County, Iowa, 2014–15

USGS Publications Warehouse

Kalkhoff, Stephen J.

2016-07-12

Phosphorus data were collected from the Kent Park Lake watershed in Johnson County, Iowa, in 2014 and 2015 to obtain information to assist in the management of the water quality in the lake. Phosphorus concentrations were measured for sediment from several ponds in the watershed and sediment deposited in the lake. The first set of samples was collected in 2014 to understand phosphorus in several potential sources to the lake and the spatial variability in lake sediments. Phosphorus concentrations ranged from 68 to 380 milligrams per kilogram in lake sediment and from 57 to 220 milligrams per kilogram in sedimentation and dredge spoil ponds. Additional samples were collected in 2015 to determine how phosphorus concentrations vary with depth in the lake sediment. Phosphorus concentrations generally decreased with increasing depth within the lake sediment. In 2015, total phosphorus concentrations in lake sediment ranged from 50 to 340 milligrams per kilogram.

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca.

PubMed

Cáceres Choque, Luis Fernando; Ramos Ramos, Oswaldo E; Valdez Castro, Sulema N; Choque Aspiazu, Rigoberto R; Choque Mamani, Rocío G; Fernández Alcazar, Samuel G; Sracek, Ondra; Bhattacharya, Prosun

2013-12-01

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8-156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.

Coupled Source-to-Sink and Geodynamic Modeling of Extensional Basins: A Case Study of the Gulf of Corinth, Greece.

NASA Astrophysics Data System (ADS)

Smithells, R. A.

2015-12-01

Many studies investigate rift evolution with geodynamic models, giving insight into the architecture and morphology of extensional basins. Recent advances in modeling allow better temporal and spatial resolution in surface processes when coupled with geodynamic processes, allowing modeling the interactions between sediment erosion and deposition with rift development. Here we use a combination of dynamic forward modeling and landscape evolution models to determine feedback and interaction of sediment erosion and deposition with rift development and fault localization. The Gulf of Corinth is an ideal basin to study the effect of surface processes on rifting because it can be considered a closed system for sediment erosion and deposition. It is a young rift, not affected by subsequent overprinting and there is a large amount of data from offshore seismic surveys and onshore fieldwork to constrain its evolution. We reconstruct paleo topography of the catchment area by removing the effects of fault activity and sediment erosion. The reconstructed topography is used to model different scenarios for landscape evolution and the results determine the relative importance of regional and fault related uplift and subsidence on the drainage evolution in the Gulf of Corinth. The landscape models are also used to constrain source area and total amount of sediment eroded from the catchment area. The eroded onshore volume and the amount of sediment deposited offshore are compared in order to reconstruct the source-to-sink balance for the Gulf of Corinth. Our results constrain the evolution of the catchment area and timings of drainage reversals that occurred in the fluvial systems of the Gulf of Corinth. Coupled forward tectonic-surface process modeling is used to investigate feedback between rift formation and the surface processes and to determine its role in developing asymmetry and fault migration in an extensional setting. In this study we investigate the effect of a mature sediment routing system on rift development. Our models show that migrating fault activity may be triggered by migration of sediment deposition filling the accommodation space provided by the associated half grabens. The asymmetric development of the rift can be explained by the preferred erosion and deposition of the southern flank of the Gulf of Corinth.

Assessing heavy metal toxicity in sediments of Chennai Coast of Tamil Nadu using Energy Dispersive X-Ray Fluorescence Spectroscopy (EDXRF) with statistical approach.

PubMed

Tholkappian, M; Ravisankar, R; Chandrasekaran, A; Jebakumar, J Prince Prakash; Kanagasabapathy, K V; Prasad, M V R; Satapathy, K K

2018-01-01

The concentration of some heavy metals: Al, Ca, K, Fe, Ti, Mg, Mn, V, Cr, Zn, Ni and Co in sediments from Pulicat Lake to Vadanemmeli along Chennai Coast, Tamil Nadu has been determined using EDXRF technique. The mean concentrations of Mg, Al, K, Ca, Ti, Fe, V, Cr, Mn, Co, Ni, and Zn were found to be 1918, 25436, 9832, 9859, 2109, 8209, 41.58, 34.14, 160.80, 2.85. 18.79 and 29.12 mg kg -1 respectively. These mean concentrations do not exceed the world crustal average. The level of pollution attributed to heavy metals was evaluated using several pollution indicators in order to determine anthropogenically derived contaminations. Enrichment Factor (EF), Geoaccumulation Index (I geo ), Contamination Factor (CF) and Pollution Load Index (PLI) were used in evaluating the contamination status of sediments. Enrichment Factors (EF) reveal the anthropogenic sources of V, Cr, Ni and Zn Geoaccumulation Index (I geo ) results reveal that the study area is not contaminated by the heavy metals. Similar results were also obtained by using pollution load index (PLI). The results of pollution indices indicates that most of the locations were not polluted by heavy metals. Multivariate statistical analysis performed using principal components and clustering techniques were used to identify the source of the heavy metals. The result of statistical procedures indicate that heavy metals in sediments are mainly of natural origin. This study provides a relatively novel technique for identifying and mapping the distribution of metal pollutants and their sources in sediment.

A combined experimental-modelling method for the detection and analysis of pollution in coastal zones

NASA Astrophysics Data System (ADS)

Limić, Nedzad; Valković, Vladivoj

1996-04-01

Pollution of coastal seas with toxic substances can be efficiently detected by examining toxic materials in sediment samples. These samples contain information on the overall pollution from surrounding sources such as yacht anchorages, nearby industries, sewage systems, etc. In an efficient analysis of pollution one must determine the contribution from each individual source. In this work it is demonstrated that a modelling method can be utilized for solving this latter problem. The modelling method is based on a unique interpretation of concentrations in sediments from all sampling stations. The proposed method is a synthesis consisting of the utilization of PIXE as an efficient method of pollution concentration determination and the code ANCOPOL (N. Limic and R. Benis, The computer code ANCOPOL, SimTel/msdos/geology, 1994 [1]) for the calculation of contributions from the main polluters. The efficiency and limits of the proposed method are demonstrated by discussing trace element concentrations in sediments of Punat Bay on the island of Krk in Croatia.

Provenance, tectonic setting and age of the sediments of the Upper Disang Formation in the Phek District, Nagaland

NASA Astrophysics Data System (ADS)

Imchen, Watitemsu; Thong, Glenn T.; Pongen, Temjenrenla

2014-07-01

Integrated petrographic and geochemical studies of sandstones, and geochemical studies of shales of turbidites from the Upper Disang Formation, Phek district, Nagaland have been carried out to determine their provenance, weathering conditions and tectonic setting. Paleomagnetic studies were carried out for magnetostratigraphic purposes. Studies indicate that most of these sediments were derived from felsic and mafic sources with minor contribution from low to medium grade metamorphic rocks. Most of the felsic components have been transported from distant sources as evidenced from extensive reworking of grains. The most likely source rocks are the granite/granite gneiss of the Karbi Anglong crystalline complex to the west of the study area. However, the bulk of the sediments have been contributed from nearby basic and ultrabasic sources. This would correspond to the fast rising Naga Ophiolite, which probably emerged above sea level during the Mid-Eocene. Prevailing high temperatures and humid climate caused intense chemical weathering of the source rocks. The sediments from the west were transported great distances by turbidity currents into an easterly deepening basin. Sediments from the nearby east were rapidly dumped on the seafloor causing rapid mixing, leading to textural and chemical immaturity. Paleomagnetic studies endorse published paleontological evidence to indicate that most of the sediments of the Upper Disang Formation were deposited during the Late Eocene. Deposition took place in a westward-migrating accretionary-prism complex in an active-margin setting at the convergence of the Indian and Burma plates. This was a rapidly-closing basin where anoxic conditions prevailed. Towards the end of the Eocene this basin closed completely with the destruction of the Tethyan Ocean.

Linking hysteresis patterns and variations in suspended sediment sources in a highly urbanized river: a case of the River Aire, UK

NASA Astrophysics Data System (ADS)

Vercruysse, Kim; Grabowski, Robert

2017-04-01

The natural sediment balance of rivers is often disturbed as a result of increased fine sediment influx from soil erosion and/or modifications to the river channel and floodplains, causing numerous problems related to ecology, water quality, flood risk and infrastructure. It is of great importance to understand fine sediment dynamics in rivers in order to manage the problems appropriately. However, despite decades of research, our understanding of fine sediment transport is not yet sufficient to fully explain the spatial and temporal variability in sediment concentrations in rivers. To this end, the study aims to investigate the importance of sediment source variations to explain hysteresis patterns in suspended sediment transport. A sediment fingerprinting technique based on infrared spectrometry was applied in the highly urbanized River Aire catchment in northern England to identify the dominant sources of suspended sediment. Three types of potential sediment source samples were collected: soil samples from pasture in three lithological areas (limestone, millstone grit and coal measures), eroding riverbanks and urban street dust. All source samples were analyzed with Diffuse Reflectance Infrared Fourier Transform spectrometry (DRIFTS). Discriminant analysis demonstrated that the source materials could be discriminated based on their respective infrared spectra. Infrared spectra of experimental mixtures were then used to develop statistical models to estimate relative source contributions from suspended sediment samples. Suspended sediment samples were collected during a set of high flow events between 2015 and 2016, showing different hysteresis patterns between suspended sediment concentration and discharge. The fingerprinting results suggest that pasture from the limestone area is the dominant source of fine sediment. However, significant variations in source contributions during and between events are present. Small events, in terms of discharge, are marked by relatively high contributions of urban street dust, while high stream flows correspond with higher sediment contributions from riverbanks and pasture. Seasonal variations in the dominant sources are also present. The results emphasize the importance of capturing sediment source variations to gain better insights into the drivers of fine sediment transport over various timescales.

Sediment Tracking Using Carbon and Nitrogen Stable Isotopes

NASA Astrophysics Data System (ADS)

Fox, J. F.; Papanicolaou, A.

2002-12-01

As landscapes are stripped of valuable, nutrient rich topsoils and streams are clouded with habitat degrading fine sediment, it becomes increasingly important to identify and mitigate erosive surfaces. Particle tracking using vegetative derived carbon (C) and nitrogen (N) isotopic signatures and carbon/nitrogen (C/N) atomic ratios offer a promising technique to identify such problematic sources. Consultants and researchers successfully use C, N, and other stable isotopes of water for hydrologic purposes, such as quantifying groundwater vs. surface water contribution to a hydrograph. Recently, C and N isotopes and C/N atomic ratios of sediment were used to determine sediment mass balance within estuarine environments. The current research investigates C and N isotopes and C/N atomic ratios of source sediment for two primary purposes: (1) to establish a blueprint methodology for estimating sediment source and erosion rates within a watershed using this isotopic technology coupled with mineralogy fingerprinting techniques, radionuclide transport monitoring, and erosion-transport models, and (2) to complete field studies of upland erosion processes, such as, solifluction, mass wasting, creep, fluvial erosion, and vegetative induced erosion. Upland and floodplain sediment profiles and riverine suspended sediment were sampled on two occasions, May 2002 and August 2002, in the upper Palouse River watershed of northern Idaho. Over 300 samples were obtained from deep intermountain valley (i.e. forest) and rolling crop field (i.e. agriculture) locations. Preliminary sample treatment was completed at the Washington State University Water Quality Laboratory where samples were dried, removed of organic constituents, and prepared for isotopic analysis. C and N isotope and C/N atomic ratio analyses was performed at the University of Idaho Natural Resources Stable Isotope Laboratory using a Costech 4010 Elemental Combustion System connected with a continuous flow inlet system to the Finnigan MAT Delta Plus isotope ratio mass spectrometer. Results indicate distinct N isotopic signatures and C/N atomic ratios for forest and agriculture sediment sources. In addition, unique C and N isotopic signatures and C/N atomic ratios exist within floodplain and upland surfaces, and within the 10 centimeter profiles of erosion and deposition locations. Suspended sediment analyses are preliminary at this time. Conclusions indicate that sediment C and N isotopic signature and C/N atomic ratio are dependent upon land use and soil moisture conditions, and will serve as a useful technique in quantifying erosive source rates and understanding upland erosion processes.

Methane Production and Transport within the Marsh Biome of Biosphere 2

NASA Technical Reports Server (NTRS)

Molnar, Jennifer; Goodridge, Kelven

1997-01-01

In recent decades, the concentration of methane in the earth's atmosphere increased 1-2% annually. It's rate of increases, combined with methane's effectiveness as a greenhouse gas, has led to an intensive research effort to determine the sources and sinks of the gas in the environment. Biosphere 2 offers a unique opportunity to contribute to the effort because it lacks a major photochemical sink present in the Earth's atmosphere. Researchers can therefore concentrate on biological processes involved in methane cycles. Wetlands are a large source of atmospheric methane, due to anoxic conditions in the sediments and the abundance of organic materials. In order to determine if these conditions in Biosphere 2 also promote methane production, this study looked for the fluxes of methane and methods of transport of the gas from from the water and sediments to the atmosphere in the Marsh Biome. Fluxes of methane from the sediments and waters were measured using static chambers, peepers, and leaf bags. Fluxes and vertical profiles of methane in the sediments show that substantial amounts of methane are being produced in the marsh and are being transported into the Biosphere 2 environment.

Depositional history of organic contaminants on the Palos Verdes Shelf, California

USGS Publications Warehouse

Eganhouse, R.P.; Pontolillo, J.

2000-01-01

During more than 60 years, sedimentation on the Palos Verdes Shelf has been dominated by time-varying inputs of municipal wastewater from the Los Angeles County Sanitation Districts (LACSD) and debris from the Portuguese Bend Landslide (PBL). The present study examines the depositional history of wastewater-derived organic contaminants at a site approximately 6-8 km downcurrent from the outfall system. Sediments at this location are impacted by contributions from both sources, but the relative influence of the sources has changed over time. Two classes of hydrophobic organic contaminants (chlorinated hydrocarbons, long-chain alkylbenzenes) were determined in sediment cores collected in 1981 and 1992. Using molecular stratigraphy, we determined average sedimentation rates (cm/year) and mass accumulation rates (g cm-2 year-1) for the following periods: 1955-1965, 1965-1971, 1971-1981 and 1981-1992. The results show that sedimentation and mass accumulation rates increased from 1955 to 1971 and decreased from 1971 to 1981. These trends are consistent with historical information on the emission of suspended solids from the outfall system, indicating that the discharge of wastes dominated sedimentation at the site during this period. In the 1980s and early 1990s, however, mass accumulation rates increased in spite of continually decreasing emissions of wastewater solids. Several lines of evidence indicate that this increase was due to mobilization of debris from the PBL during and after unusually strong winter storms in the 1980s. As a result, heavily contaminated sediments deposited during the years of greatest waste emissions (i.e. 1950-1970) have been buried to greater sub-bottom depths, thereby reducing their availability for mobilization to the overlying water column. These results highlight the dynamic nature of sedimentation in contaminated coastal ecosystems and its importance to the long-term fate and effects of toxic substances.

Petroleum hydrocarbons in a water-sediment system from Yellow River estuary and adjacent coastal area, China: Distribution pattern, risk assessment and sources.

PubMed

Wang, Min; Wang, Chuanyuan; Li, Yuanwei

2017-09-15

Aliphatic hydrocarbons (AHs), biomarker and polycyclic aromatic hydrocarbons (PAHs) concentrations of surface water and sediment samples collected from Yellow River Estuary and adjacent coastal area in China were measured to determine their spatial distributions, analyze their sources and evaluate the ecological risk of PAHs in the water-sediment system. The spatial distributions of n-alkane in sediments are mainly controlled by the mixing inputs of terrigenous and marine components. In comparison with AHs, the total concentrations of Σ16PAHs in surface sediments from a transect of the offshore area were noticeably higher than that of the riverine and estuary areas. Additionally, the AHs and total PAHs concentrations all indicated an overall pattern of a seaward decrease. The PAHs concentrations during the dry season (mainly in the form of dissolved phase) were higher than that of PAHs (mainly dissolved phase and particulate phase form) in the flooding season. In comparison with global concentration levels of PAHs, the level of PAHs in suspended particulate matter and sediments from the Yellow River Estuary was lower than those from other countries, while the concentration of PAHs in the dissolved phase were in the middle range. Petroleum contamination, mainly from oil exploration and discharge of pollutants from rivers, was the main source of n-alkanes. The PAHs in the river were mostly of petrogenic origin, while those in the estuarial and marine areas originated mainly from pyrogenic sources. The results of the toxicology assessment suggested that the PAHs in sediments from Yellow River Estuary and adjacent coastal area exhibited a low potential eco-toxicological contamination level. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distribution, fate and risk assessment of PAHs in water and sediments from an aquaculture- and shipping-impacted subtropical lake, China.

PubMed

Zeng, Qingfei; Jeppesen, Erik; Gu, Xiaohong; Mao, Zhigang; Chen, Huihui

2018-06-01

The spatial-temporal distribution of polycyclic aromatic hydrocarbons (PAHs), their source, and potential health risks were determined in overlying water and surface sediments from Chinese Lake Guchenghu, adjacent commercial mitten crab ponds and the connected Wushen Canal to assess the contamination profile of the area. The total PAHs concentrations in sediment and water were 86.7-1790 ng g -1 dry weight (dw) and 184-365 ng L -1 in summer and 184-3140 ng g -1 dw and 410-1160 ng L -1 in winter. Two- and 3-ring PAHs were the predominant compounds in water, while PAHs with 4-6 rings dominated in the sediment at both upstream and downstream sites. PAHs concentrations in water and sediment correlated significantly. Diagnostic ratios and positive matrix factorization (PMF) analyses indicated a strong influence of pyrogenic sources, principally biomass combustion and vehicle emission, on the concentrations of PAHs. The distribution, source identification, and mean effects range median quotients (mERMQ) analyses suggested that the most contaminated area was located downstream and upstream of the Wushen Canal, followed by Lake Guchenghu and a commercial crab pond area. From an ecological point of view, PAHs posed a potential risk to drinking water sources as the concentrations exceeded the guideline value of 0.05 μg L -1 . The risk posed by sediment PAHs appeared to be low except for the downstream sites, which showed a low to medium ecotoxicological risk. The total incremental lifetime cancer risks ranged between 10 -7 and 10 -5 , indicating a potential health risk for the local population when exposed to sediment from the area. Copyright © 2018 Elsevier Ltd. All rights reserved.

(dis)connectivity in Catchment-Scale Sediment Cascades: Forecasting Responses in Sediment Flux Associated with Various Forms of Environmental Change

NASA Astrophysics Data System (ADS)

Fryirs, K.

2010-12-01

Fluvial systems are key elements that drive Earth surface change because they convey most of the global fluxes of water and sediment from land to oceans. Fluvial fluxes of water and sediment also drive a significant proportion of the terrestrial biochemical cycling of carbon, nutrients and pollutants. Understanding the internal dynamics of the sediment cascade is therefore critical to forecasting how environmental change, whether driven by extrinsic climate change, or intrinsic human-disturbance, might affect biochemical fluxes. To understand the internal dynamics of sediment flux requires a framework that can incorporate the various processes involved in the movement of sediment from the source area through the basin system to the outlet, and can take account of spatial variability within the system and the timeframes over which these processes operate. Traditionally a sediment budget approach has been used to quantify the sediment being supplied, transported and stored in various parts of catchments. In more recent years, a more sophisticated approach to analysis of catchment linkages and (dis)connectivity has been developed that incorporates both spatial and temporal variability in the operation of the sediment cascade. This framework is based on an understanding of longitudinal, lateral and vertical linkages in sediment flux in catchments, and where blockages occur to disrupt these linkages. These blockages have been termed buffers, barriers and blankets (Fryirs et al 2007). Depending on the position of these blockages, and their sediment residence time, various parts of catchment may be actively contributing sediment to the catchment sediment cascade and be switched on, or inactive and switched off. The degree of spatial connectivity determines the effective catchment area. The breaching capacity of buffers, barriers and blankets determines the effective timescale over which certain parts of a catchment are switched on. The sediment residence time and thresholds of stability dictate the timeframe over which certain parts of catchments are actively contributing sediment to the cascade. The manifestation of geomorphic change, and response times to disturbance can be modeled within such a framework. The notion that certain sediment sources and transport mechanisms may be switched on or switched off under various climate change scenarios can also be examined using this framework. Fryirs, K., Brierley, G. J., Preston, N. J. and Kasai, M. 2007. Buffers, barriers and blankets: The (dis)connectivity of catchment-scale sediment cascades. Catena, 70, 49-67

Quantity of dates trumps quality of dates for dense Bayesian radiocarbon sediment chronologies - Gas ion source 14C dating instructed by simultaneous Bayesian accumulation rate modeling

NASA Astrophysics Data System (ADS)

Rosenheim, B. E.; Firesinger, D.; Roberts, M. L.; Burton, J. R.; Khan, N.; Moyer, R. P.

2016-12-01

Radiocarbon (14C) sediment core chronologies benefit from a high density of dates, even when precision of individual dates is sacrificed. This is demonstrated by a combined approach of rapid 14C analysis of CO2 gas generated from carbonates and organic material coupled with Bayesian statistical modeling. Analysis of 14C is facilitated by the gas ion source on the Continuous Flow Accelerator Mass Spectrometry (CFAMS) system at the Woods Hole Oceanographic Institution's National Ocean Sciences Accelerator Mass Spectrometry facility. This instrument is capable of producing a 14C determination of +/- 100 14C y precision every 4-5 minutes, with limited sample handling (dissolution of carbonates and/or combustion of organic carbon in evacuated containers). Rapid analysis allows over-preparation of samples to include replicates at each depth and/or comparison of different sample types at particular depths in a sediment or peat core. Analysis priority is given to depths that have the least chronologic precision as determined by Bayesian modeling of the chronology of calibrated ages. Use of such a statistical approach to determine the order in which samples are run ensures that the chronology constantly improves so long as material is available for the analysis of chronologic weak points. Ultimately, accuracy of the chronology is determined by the material that is actually being dated, and our combined approach allows testing of different constituents of the organic carbon pool and the carbonate minerals within a core. We will present preliminary results from a deep-sea sediment core abundant in deep-sea foraminifera as well as coastal wetland peat cores to demonstrate statistical improvements in sediment- and peat-core chronologies obtained by increasing the quantity and decreasing the quality of individual dates.

Use of Composite Fingerprinting Technique to Determine Contribution of Paria River Sediments to Dam-Release Flood Deposits in Marble Canyon, Grand Canyon, Az

NASA Astrophysics Data System (ADS)

Chapman, K.; Parnell, R. A.; Smith, M. E.; Grams, P. E.; Mueller, E. R.

2015-12-01

The 1963 closure of Glen Canyon Dam drastically reduced the downstream sediment supply and altered daily flow regimes of the Colorado River through Grand Canyon, resulting in significant sandbar erosion downstream of the dam. Dam-release floods, known as High Flow Experiments (HFEs), have occurred six times since 1996 and are intended to rebuild Grand Canyon sandbars using tributary-supplied sediment. In Marble Canyon (first 100 km of Grand Canyon) the targeted tributary is the Paria River which supplies approximately 90% of the annual suspended sediment flux through Marble Canyon; the same input contributed less than 6% prior to the dam. Annual topographic surveys have established that HFEs are effective at rebuilding sandbars. However, the long-term viability of using HFEs for sandbar maintenance is dependent on a sustainable source of sediments comprising HFE deposits. Significant use of non-tributary, main-stem sediments (i.e. pre-dam sand stored in eddies or the channel bed) in HFE deposits would indicate reliance on a limited resource, and diminishing returns in the ability of HFEs to rebuild sandbars. In this study, we sampled vertically throughout 12 bars in Marble Canyon to document temporal and downstream changes in the proportion of sediment sourced from the Paria River during the 2013 and 2014 HFEs. Preliminary data suggest that heavy mineral compositions and concentrations of Ti, S, Cr and Rb, all of which are influenced by grainsize, could be sufficiently capable of differentiating Paria-derived and main-stem sediments when combined into a composite fingerprint (CF). A multivariate mixing model using these CFs quantitatively determines the contribution of Paria-derived sediment in each HFE deposit sample. Mixing model endmembers for non-Paria sand include pre-dam flood deposits in Glen and Marble Canyons, and Marble Canyon dredge samples. These results elucidate the role of contemporary versus legacy sediment in long-term sandbar maintenance.

Watershed sediment source fingerprinting: a view under the hood

NASA Astrophysics Data System (ADS)

Smith, H.

2015-12-01

Sediment source fingerprinting procedures involve the discrimination of sediment sources based on physical and chemical properties and estimation of the contributions from those sources to mixtures of fine-grained sediment transported within watersheds. Sources of sediment widely considered include agricultural land uses, channel banks and geological zones. There has been a tendency in the literature for sediment fingerprinting to be presented as a technique that can deliver accurate and precise information on source contributions to sediment across a range of environments. However, recent research indicates that such a view of sediment fingerprinting cannot presently be supported. Furthermore, many past papers lack transparency in data processing and presentation that prevents the critical assessment of results and hinders wider uptake of the technique. Therefore, this contribution aims to delve 'under the hood' of sediment fingerprinting to promote further discussion and debate over future research needs and method limitations. It draws on important developments from the last two years concerning the effect of (i) tracer selection, (ii) tracer behaviour during transport, (iii) corrections to tracer datasets and (iv) the choice of mixing model on predictions of sediment source contributions. Sediment fingerprinting has the potential to make a very significant contribution to the measurement of contemporary sediment sources in watersheds, but cannot be viewed as an 'off-the-shelf' technique for widespread application until important challenges have been addressed.

A Manual to Identify Sources of Fluvial Sediment | Science ...

EPA Pesticide Factsheets

Sedimentation is one of the main causes of stream/river aquatic life use impairments in R3. Currently states lack standard guidance on appropriate tools available to quantify sediment sources and develop sediment budgets in TMDL Development. Methods for distinguishing sediment types for TMDL development will focus stream restoration and soil conservation efforts in strategic locations in a watershed and may better target appropriate BMPs to achieve sediment load reductions. Properly identifying sediment sources in a TMDL will also help focus NPDES permitting, stream restoration activities and other TMDL implementation efforts. This project will focus on developing a framework that will be published as a guidance document that outlines steps and approaches to identify the significant sources of fine-grained sediment in 303D listed watersheds. In this framework, the sediment-fingerprinting and sediment budget approaches will be emphasized. This project will focus on developing a framework that will be published as a guidance document that outlines steps and approaches to identify the significant sources of fine-grained sediment in 303D listed watersheds. In this framework, the sediment-fingerprinting and sediment budget approaches will be emphasized.

Stimulation of Microbially Mediated Arsenic Release in Bangladesh Aquifers by Young Carbon Indicated by Radiocarbon Analysis of Sedimentary Bacterial Lipids.

PubMed

Whaley-Martin, K J; Mailloux, B J; van Geen, A; Bostick, B C; Silvern, R F; Kim, C; Ahmed, K M; Choudhury, I; Slater, G F

2016-07-19

The sources of reduced carbon driving the microbially mediated release of arsenic to shallow groundwater in Bangladesh remain poorly understood. Using radiocarbon analysis of phospholipid fatty acids (PLFAs) and potential carbon pools, the abundance and carbon sources of the active, sediment-associated, in situ bacterial communities inhabiting shallow aquifers (<30 m) at two sites in Araihazar, Bangladesh, were investigated. At both sites, sedimentary organic carbon (SOC) Δ(14)C signatures of -631 ± 54‰ (n = 12) were significantly depleted relative to dissolved inorganic carbon (DIC) of +24 ± 30‰ and dissolved organic carbon (DOC) of -230 ± 100‰. Sediment-associated PLFA Δ(14)C signatures (n = 10) at Site F (-167‰ to +20‰) and Site B (-163‰ to +21‰) were highly consistent and indicated utilization of carbon sources younger than the SOC, likely from the DOC pool. Sediment-associated PLFA Δ(14)C signatures were consistent with previously determined Δ(14)C signatures of microbial DNA sampled from groundwater at Site F indicating that the carbon source for these two components of the subsurface microbial community is consistent and is temporally stable over the two years between studies. These results demonstrate that the utilization of relatively young carbon sources by the subsurface microbial community occurs at sites with varying hydrology. Further they indicate that these young carbon sources drive the metabolism of the more abundant sediment-associated microbial communities that are presumably more capable of Fe reduction and associated release of As. This implies that an introduction of younger carbon to as of yet unaffected sediments (such as those comprising the deeper Pleistocene aquifer) could stimulate microbial communities and result in arsenic release.

Effects of Chinese Deforestation and Reforestation Policies on Sediment Sourcing in Yunnan, China

NASA Astrophysics Data System (ADS)

Henck Schmidt, A. C.; Bierman, P. R.; Sosa-Gonzalez, V.; Neilson, T. B.; Singleton, A.; Qiu, Y.; Bower, J.; Rood, D. H.

2015-12-01

Widespread deforestation from the 1960s through 1980s, blamed for catastrophic flooding in the lower Yangtze in 1998, prompted bans on logging and agriculture on steep slopes in western China. However, despite reports of extensive erosion resulting from the deforestation, sediment yield data show no corresponding increase during this time. Prior work suggested that if the deforestation increased erosion, the sediment is stored in floodplains, terraces, and alluvial fans throughout the region. In order to test this hypothesis, we sampled in-channel and overbank sediments at 38 locations, 19 of which are co-located with Chinese hydrology stations with at least five years of daily sediment yield data. Sediments were analyzed for meteoric and in situ 10-Be, unsupported 210-Pb, and 137-Cs. Unsupported 210-Pb activity is uniformly low throughout the study area and 137-Cs was found only in a few high-altitude, low-relief watersheds. Modern sediment yields, determined from Chinese data, are higher than long term in situ 10-Be-derived erosion rates in all but four watersheds, where we hypothesize sediment is being stored in alluvial features and agricultural terraces or that stochastic events such as landslides were not captured in the sediment yield data. Overall there is no relationship between topographic or climatic metrics, including slope, relief, or mean annual rainfall for any of the four isotopes except for a weak but statistically significant negative relationship between in situ 10-Be derived erosion rate and rainfall. Although paired in-channel and overbank samples are statistically indistinguishable for meteoric and in situ 10-Be, the overbank samples have lower unsupported 210-Pb activity, suggesting deeper sediment sourcing during the monsoon. In summary, in addition to suggesting differences between wet- and dry-season sediment sources, preliminary results support previous hypotheses regarding increased contemporary erosion and low hillslope-channel connectivity.

Characterization of alluvial dust sources and their temporal development - a multi-sensor approach for the Aïr Massif, Niger

NASA Astrophysics Data System (ADS)

Feuerstein, Stefanie; Schepanski, Kerstin

2017-04-01

One of the world's largest sources of atmospheric dust is the Sahara. It is said that 55% of the total global dust emission can be linked to the desert in northern Africa. Thus, understanding the Saharan dust sources is of great importance to estimate the total global dust load and its variability. Especially one type of dust sources has gained attention in dust research in recent years: The emission of dust from sediments formed by hydrologic processes, so called alluvial dust sources. These sediments were either formed in the past under the influences of a more humid paleoclimate or are deposited recently, e.g. during strong precipitation events when surficial runoff leads to the activation of wadi systems or to the occurrence of flash floods. Especially the latter phenomenon is able to deliver a huge amount of potentially erodible sediments. The research presented here focuses on the characterization of these alluvial dust sources with special attention on their temporal variability in relation to wet and dry phases. A study area covering the Aïr Massif in Niger is analysed over a four years time span from January 2013 to December 2016. The whole cycle from sediment formation to dust emission is illustrated by using data of various satellite sensors that are able to capture the processes taking place at the land surface as well as in the atmosphere: (1) The rainfall distribution for the study area is shown by time series of the TRMM precipitation estimates. A catchment analysis of the area helps to estimate the amount of surficial runoff and to detect areas of potential sediment accumulation. (2) Changes in the sediment structure of the land surface are analysed using atmospherically corrected time series of NASA's Landsat-8 OLI satellite. A land cover classification shows the distribution of alluvial sediments over the area; fresh layers of alluvial deposits are detected. Furthermore, the evolution of the vegetation cover, which inhibits dust emission, is analysed by calculating NDVI time series from the Landsat data. (3) The MSG Dust Product is used to determine the frequency of dust emission from the investigation area. Furthermore, the product allows the precise localization of the sources. Therefore the alluvial sediments can directly be connected to dust emission. By combining the findings of these different satellite sensors, a profound analysis of alluvial dust sources on different levels is possible. The connection between the amount of precipitation and the supply of potentially erodible sediments is shown, which leads to a better understanding of the temporal evolution and importance of this source type.

Reconstruction of historical lead contamination and sources in Lake Hailing, Eastern China: a Pb isotope study.

PubMed

Zhang, Rui; Guan, Minglei; Shu, Yujie; Shen, Liya; Chen, Xixi; Zhang, Fan; Li, Tiegang; Jiang, Tingchen

2016-05-01

The history records of lead and its stable isotopic ratios were determined in a sediment core to receive anthropogenic impacts on the Lake Hailing in eastern China. The sediment core was dated based on (210)Pb, (137)Cs, and (239+240)Pu. The historical changes of Pb/Al and Pb isotope ratios showed increasing trend upward throughout the core, suggesting changes in energy usage and correlating closely with the experience of a rapid economic and industrial development of the catchment, Linyi City, in eastern China. Based on the mixing end member model of Pb isotope ratios, coal combustion emission dominated anthropogenic Pb sources in the half part of the century contributing 13 to 43 % of total Pb in sediment. Moreover, contributions of chemical and organic fertilizer were 1-13 and 5-14 %, respectively. In contrast, the contribution of leaded gasoline was low than 8 %. The results indicated that historical records of Pb contamination predominantly sourced from coal combustion and chemical and organic fertilizer in the catchment. In addition, an increase of coal combustion source and fertilizers was found throughout the sediment core, whereas the contribution of leaded gasoline had declined after 2000s, which is attributed to the phaseout of leaded gasoline in China.

A simple autocorrelation algorithm for determining grain size from digital images of sediment

USGS Publications Warehouse

Rubin, D.M.

2004-01-01

Autocorrelation between pixels in digital images of sediment can be used to measure average grain size of sediment on the bed, grain-size distribution of bed sediment, and vertical profiles in grain size in a cross-sectional image through a bed. The technique is less sensitive than traditional laboratory analyses to tails of a grain-size distribution, but it offers substantial other advantages: it is 100 times as fast; it is ideal for sampling surficial sediment (the part that interacts with a flow); it can determine vertical profiles in grain size on a scale finer than can be sampled physically; and it can be used in the field to provide almost real-time grain-size analysis. The technique can be applied to digital images obtained using any source with sufficient resolution, including digital cameras, digital video, or underwater digital microscopes (for real-time grain-size mapping of the bed). ?? 2004, SEPM (Society for Sedimentary Geology).

Butyltin compounds in sediments from the commercial harbor of Alexandria City, Egypt.

PubMed

Barakat, A O; Kim, M; Qian, Y; Wade, T L

2001-12-01

Tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) compounds were quantitatively determined in surface-sediment samples collected from 23 sites in the commercial harbor of Alexandria City, Egypt. Butyltin concentrations in sediments varied widely depending on the sample location, ranging from less than 0.1 to 186 ng g(-1) of Sn for MBT, less than 0.1 to 379 ng g(-1) of Sn for DBT, and 1 to 2,067 ng g(-1) of Sn for TBT Elevated TBT concentrations, ranging from 727 to 2,067 ng g(-1) of Sn were observed in harbors, marinas, and near ship-repair facilities, indicating that the butyltin-containing, antifouling paints of boats and vessels are the major source of butyltin contamination. The TBT concentration decreased rapidly away from potential source areas of boat docking and repair facilities. The high relative concentrations of TBT in the sediments indicated that degradation processes in the sediments are minor, probably due to the anoxic sedimentary conditions at the sampling sites and/or relatively fresh input of TBT to these sites.

Acoustic filtration and sedimentation of soot particles

NASA Astrophysics Data System (ADS)

Martin, K. M.; Ezekoye, O. A.

Removal of soot particles from a static chamber by an intense acoustic field is investigated. Combustion of a solid fuel fills a rectangular chamber with small soot particles, which sediment very slowly. The chamber is then irradiated by an intense acoustic source to produce a three dimensional standing wave field in the chamber. The acoustic excitation causes the soot particles to agglomerate, forming larger particles which sediment faster from the system. The soot also forms 1-2 cm disks, with axes parallel to the axis of the acoustic source, which are levitated by the sound field at half-wavelength spacing within the chamber. Laser extinction measurements are made to determine soot volume fractions as a function of exposure time within the chamber. The volume fraction is reduced over time by sedimentation and by particle migration to the disks. The soot disks are considered to be a novel mechanism for particle removal from the air stream, and this mechanism has been dubbed acoustic filtration. An experimental method is developed for comparing the rate of soot removal by sedimentation alone with the rate of soot removal by sedimentation and acoustic filtration. Results show that acoustic filtration increases the rate of soot removal by a factor of two over acoustically-induced sedimentation alone.

A new method for fingerprinting sediments source contributions using distances from discriminant function analysis

USDA-ARS?s Scientific Manuscript database

Mixing models have been used to predict sediment source contributions. The inherent problem of the mixing models limited the number of sediment sources. The objective of this study is to develop and evaluate a new method using Discriminant Function Analysis (DFA) to fingerprint sediment source contr...

Changes of floodplain morphology by water mills: Legacy sediments stored behind mill dams as archive and source for pollution - Examples from the Wurm River, Lower Rhine Embayment, Germany

NASA Astrophysics Data System (ADS)

Buchty-Lemke, Michael; Frings, Roy; Hagemann, Lukas; Lehmkuhl, Frank; Maaß, Anna-Lisa; Schwarzbauer, Jan

2016-04-01

The Wurm River (Lower Rhine Embayment, Germany) is a small stream in a low mountain area near the Dutch-German border that has seen a lot of anthropogenic changes of its morphology since medieval times. Among other influencing factors, water mills, in particular, had an early impact on the sediment dynamics and created sediment traps. Several knickpoints in the long profile may represent the legacy of mill damming - or founded mill building at these spots. The knickpoints may also represent the aftermath of the colliery history. A study site in the upper reaches of the Wurm River features erosion terraces, incised following the demise of a mill dam in the early 20th century. The mill pond most likely collected sediment and additives e.g. used in agricultural and industrial processes. These legacy sediments from behind former mill dams provide information about anthropogenic pollution, particularly for the era of industrialization in the vicinity of the old industrial area of the city of Aachen. Along with the demise of the mill dam and the increased incision tendency, the sediments are also a secondary source for pollution in case of remobilization of contaminated sediments. Two major research questions are addressed. A) Which individual hydrological and geomorphological processes, both upstream and downstream, triggered the incision and the construction of the erosion terraces, which are preserved in the mill pond sediments? Is either the demised mill dam, or subsidence effects, or a combination of both the determining factor? B) Which contaminants are retained in the sediments? Is there a detectable point source for the pollutants or is it a mixture of diffuse anthropogenic (industry, agriculture, traffic, wastewater) and natural origin? To tackle these questions, sedimentological data are combined with geomorphological mapping and evaluation of historical data. A soil profile provides insight into the architecture of the floodplain, which is built of riverbed sediments overlain by stratified fine clastic and organic-rich material, representing the sediment being trapped when the mill dam existed. X-ray fluorescence and grain size analysis are used to determine the depositional process, provenance and chemostratigraphy. Knowledge about the distribution and fate of pollutants in sediments is valuable for river management purposes. Measures within the scope of the EU Water Framework Directive have been implemented at several breaches at the Wurm River, and further ones are planned. Potential risks due to remobilization of polluted alluvial sediments must thereby be taken into account. Furthermore, e.g. dismantling of transverse structures to improve passage for fish might trigger similar erosion processes and affects the sediment continuity.

Mercury Isotope Study of Sources and Exposure Pathways of Methylmercury in Estuarine Food Webs in the Northeastern U.S.

PubMed Central

2015-01-01

We measured mercury (Hg) isotope ratios in sediments and various estuarine organisms (green crab, blue mussel, killifish, eider) to investigate methylmercury (MMHg) sources and exposure pathways in five Northeast coast (U.S.) estuaries. The mass independent Hg isotopic compositions (MIF; Δ199Hg) of the sediments were linearly correlated with the sediment 1/Hg concentrations (Δ199Hg: r2 = 0.77, p < 0.05), but the mass dependent isotope compositions (MDF; δ202Hg) were not (r2 = 0.26, p = 0.16), reflecting inputs of anthropogenic Hg sources with varying δ202Hg. The estuarine organisms all display positive Δ199Hg values (0.21 to 0.98 ‰) indicating that MMHg is photodegraded to varying degrees (5–12%) prior to entry into the food web. The δ202Hg and Δ199Hg values of most organisms can be explained by a mixture of MMHg and inorganic Hg from sediments. At one contaminated site mussels have anomalously high δ202Hg, indicating exposure to a second pool of MMHg, compared to sediment, crabs and fish. Eiders have similar Δ199Hg as killifish but much higher δ202Hg, suggesting that there is an internal fractionation of δ202Hg in birds. Our study shows that Hg isotopes can be used to identify multiple anthropogenic inorganic Hg and MMHg sources and determine the degree of photodegradation of MMHg in estuarine food webs. PMID:25116221

A simple distributed sediment delivery approach for rural catchments

NASA Astrophysics Data System (ADS)

Reid, Lucas; Scherer, Ulrike

2014-05-01

The transfer of sediments from source areas to surface waters is a complex process. In process based erosion models sediment input is thus quantified by representing all relevant sub processes such as detachment, transport and deposition of sediment particles along the flow path to the river. A successful application of these models requires, however, a large amount of spatially highly resolved data on physical catchment characteristics, which is only available for a few, well examined small catchments. For the lack of appropriate models, the empirical Universal Soil Loss Equation (USLE) is widely applied to quantify the sediment production in meso to large scale basins. As the USLE provides long-term mean soil loss rates, it is often combined with spatially lumped models to estimate the sediment delivery ratio (SDR). In these models, the SDR is related to data on morphological characteristics of the catchment such as average local relief, drainage density, proportion of depressions or soil texture. Some approaches include the relative distance between sediment source areas and the river channels. However, several studies showed that spatially lumped parameters describing the morphological characteristics are only of limited value to represent the factors of influence on sediment transport at the catchment scale. Sediment delivery is controlled by the location of the sediment source areas in the catchment and the morphology along the flow path to the surface water bodies. This complex interaction of spatially varied physiographic characteristics cannot be adequately represented by lumped morphological parameters. The objective of this study is to develop a simple but spatially distributed approach to quantify the sediment delivery ratio by considering the characteristics of the flow paths in a catchment. We selected a small catchment located in in an intensively cultivated loess region in Southwest Germany as study area for the development of the SDR approach. The flow pathways were extracted in a geographic information system. Then the sediment delivery ratio for each source area was determined using an empirical approach considering the slope, morphology and land use properties along the flow path. As a benchmark for the calibration of the model parameters we used results of a detailed process based erosion model available for the study area. Afterwards the approach was tested in larger catchments located in the same loess region.

Determining Sediment Sources in the Anacostia River Watershed

NASA Astrophysics Data System (ADS)

Devereux, O. H.; Needelman, B. A.; Prestegaard, K. L.; Gellis, A. C.; Ritchie, J. C.

2005-12-01

Suspended sediment is a water-quality problem in the Chesapeake Bay. This project is designed to identify sediment sources in an urban watershed, the Northeast Branch of the Anacostia River (in Washington, D.C. and Maryland - drainage area = 188.5 km2), which delivers sediment directly to the Bay. This watershed spans two physiographic regions - the Piedmont and Coastal Plain. Bank sediment and suspended-sediment deposits were characterized using the following techniques: radionuclide (Cs-137) analysis by gamma ray spectrometry, trace-element analysis by ICP-MS, clay mineralogy by XRD, and particle-size analysis by use of a laser particle-size analyzer. Sampling of bank and suspended sediment was designed to: a) characterize tributary inputs from both Piedmont and Coastal Plain sources, and b) differentiate tributary inputs from bank erosion along the main stem of the Northeast Branch. Thirteen sample sites were chosen that represent tributary source areas of each physiographic region and the main stem where mixing occurs. Surface samples of the banks were compared to overbank deposits from a ten year storm (a proxy for the suspended sediments). Fingerprint components are selected from these data. Cesium-137 concentrations were analyzed for bank and overbank deposits for each physiographic region. No clear differences were seen between the two physiographic regions. Significant differences were observed between upland tributaries and the main stem of the Anacostia River. The average activity of Cs-137 for the tributaries was 5.4 bq/kg and the average for the main stem was 1.1 bq/kg. This suggests that there is significant erosion and storage of sediment in the tributaries. The low activity from Cs-137 in the main stem suggests a lack of storage of sediment along the main stem of the river. For the trace-element data, we focused on elements that showed significant variation among the sites. For the bank sediment, these elements include: Sr, V, Y, Ce, and Nd. For the overbank deposits, Zr, V, Ba, Ce, and Cu showed significant variability. In both physiographic regions, Pb is primarily found in bank deposits, while Cu is found in higher concentrations in overbank deposits. The Cs-137 data clearly showed the erosion and storage of sediment patterns in the watershed. The trace-element data indicate that stream banks may be differentiated from overbank deposits.

Urban rivers as conveyors of hydrocarbons to sediments of estuarine areas: source characterization, flow rates and mass accumulation.

PubMed

Mauad, Cristiane R; Wagener, Angela de L R; Massone, Carlos G; Aniceto, Mayara da S; Lazzari, Letícia; Carreira, Renato S; Farias, Cássia de O

2015-02-15

Aliphatic (n-C12-n-C40, unresolved complex mixture, resolved peaks) and aromatic hydrocarbons (46 PAH) were investigated in suspended particulate matter (SPM) sampled over eleven months in six of the major rivers and two channels of the Guanabara Bay Basin. PAH flow rates of the most contaminated rivers, the contribution to the PAH sediment load of the receiving bay, and the main sources of hydrocarbons were determined. PAH (38) ranged from 28 ng L(-1) to 11,514 ng L(-1). Hydrocarbon typology and statistical evaluation demonstrated contribution of distinct sources in different regions and allowed quantification of these contributions. Total flow rate for the five major rivers amounts to 3 t year(-1) and responds for 30% of the total PAH annual input into the northern area of the Guanabara Bay. For the first time PAH mass deposited in the bay sediments has been estimated and shall serve as base for decision making and source abatement. Copyright © 2014 Elsevier B.V. All rights reserved.

Multivariate analysis of heavy metal contamination using river sediment cores of Nankan River, northern Taiwan

NASA Astrophysics Data System (ADS)

Lee, An-Sheng; Lu, Wei-Li; Huang, Jyh-Jaan; Chang, Queenie; Wei, Kuo-Yen; Lin, Chin-Jung; Liou, Sofia Ya Hsuan

2016-04-01

Through the geology and climate characteristic in Taiwan, generally rivers carry a lot of suspended particles. After these particles settled, they become sediments which are good sorbent for heavy metals in river system. Consequently, sediments can be found recording contamination footprint at low flow energy region, such as estuary. Seven sediment cores were collected along Nankan River, northern Taiwan, which is seriously contaminated by factory, household and agriculture input. Physico-chemical properties of these cores were derived from Itrax-XRF Core Scanner and grain size analysis. In order to interpret these complex data matrices, the multivariate statistical techniques (cluster analysis, factor analysis and discriminant analysis) were introduced to this study. Through the statistical determination, the result indicates four types of sediment. One of them represents contamination event which shows high concentration of Cu, Zn, Pb, Ni and Fe, and low concentration of Si and Zr. Furthermore, three possible contamination sources of this type of sediment were revealed by Factor Analysis. The combination of sediment analysis and multivariate statistical techniques used provides new insights into the contamination depositional history of Nankan River and could be similarly applied to other river systems to determine the scale of anthropogenic contamination.

Sedimentology and geochemistry of mud volcanoes in the Anaximander Mountain Region from the Eastern Mediterranean Sea.

PubMed

Talas, Ezgi; Duman, Muhammet; Küçüksezgin, Filiz; Brennan, Michael L; Raineault, Nicole A

2015-06-15

Investigations carried out on surface sediments collected from the Anaximander mud volcanoes in the Eastern Mediterranean Sea to determine sedimentary and geochemical properties. The sediment grain size distribution and geochemical contents were determined by grain size analysis, organic carbon, carbonate contents and element analysis. The results of element contents were compared to background levels of Earth's crust. The factors that affect element distribution in sediments were calculated by the nine push core samples taken from the surface of mud volcanoes by the E/V Nautilus. The grain size of the samples varies from sand to sandy silt. Enrichment and Contamination factor analysis showed that these analyses can also be used to evaluate of deep sea environmental and source parameters. It is concluded that the biological and cold seep effects are the main drivers of surface sediment characteristics from the Anaximander mud volcanoes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Problems in the fingerprints based polycyclic aromatic hydrocarbons source apportionment analysis and a practical solution.

PubMed

Zou, Yonghong; Wang, Lixia; Christensen, Erik R

2015-10-01

This work intended to explain the challenges of the fingerprints based source apportionment method for polycyclic aromatic hydrocarbons (PAH) in the aquatic environment, and to illustrate a practical and robust solution. The PAH data detected in the sediment cores from the Illinois River provide the basis of this study. Principal component analysis (PCA) separates PAH compounds into two groups reflecting their possible airborne transport patterns; but it is not able to suggest specific sources. Not all positive matrix factorization (PMF) determined sources are distinguishable due to the variability of source fingerprints. However, they constitute useful suggestions for inputs for a Bayesian chemical mass balance (CMB) analysis. The Bayesian CMB analysis takes into account the measurement errors as well as the variations of source fingerprints, and provides a credible source apportionment. Major PAH sources for Illinois River sediments are traffic (35%), coke oven (24%), coal combustion (18%), and wood combustion (14%). Copyright © 2015. Published by Elsevier Ltd.

Spatial distribution of polycyclic aromatic hydrocarbon and polychlorinated biphenyl sources in the Nakdong River Estuary, South Korea.

PubMed

Lee, Jun H; Woo, Han J; Jeong, Kap S; Kang, Jeong W; Choi, Jae U; Jeong, Eun J; Park, Kap S; Lee, Dong H

2017-10-15

Our research team investigated the elemental composition and the presence of various toxic organic compounds, such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), in estuary surface sediments to trace the spatial distribution of the sources of pollution deposited in Nakdong River, Busan, South Korea. The spatial patterns of elemental composition and toxic organic compounds were determined from the measurements of total organic carbon (TOC), total nitrogen, total sulfur, PAHs, and PCBs. The sediments had TOC contents of between 0.02 and 1.80 wt% (avg. 0.34 wt%), depending on the amount of clay-sized particles. The concentrations of PAHs and PCBs (10.8-167.7 ng g -1 dry wt and 197.0-754.0 pg g -1 dry wt, respectively) in surface sediments revealed different spatial patterns for these compounds, suggesting that they partially originated from the combustion of fossil fuels and from the use of commercial PCB products at adjacent industrial complexes. Although these concentrations were far below the Sediment Quality Guideline (SQG) of the National Oceanic and Atmospheric Administration (NOAA), the sediments at one site contained PCBs at concentrations close to the response level (754.0 pg g -1 dry wt), and were dominated by low-molecular-weight PAHs. The PAHs and PCBs in Nakdong River Estuary sediments were likely to have originated from the combustion of fossil fuels and biomass at the adjacent industrial complexes. The primarily analyzed results determined that PAHs originated from the combustion of fossil fuels and biomass, and overall concentrations were related to the contributions of individual PAHs in most sediment samples. Based on the SQG of the NOAA, our results indicate that the anthropogenic activity should be considered on the future-sustainable management of this estuary system.

Tracing suspended sediment sources in the Upper Sangamon River Basin using conservative and non-conservative tracers

NASA Astrophysics Data System (ADS)

Yu, M.; Rhoads, B. L.; Stumpf, A.

2015-12-01

As the awareness of water pollution, eutrophication and other water related environmental concerns grows, the significance of sediment in the transport of nutrients and contaminants from agricultural areas to streams has received increasing attention. Both the physical and geochemical properties of suspended sediment are strongly controlled by sediment sources. Thus, tracing sources of suspended sediment in watersheds is important for the design of management practices to reduce sediment loads and contributions of sediment-adsorbed nutrients from agricultural areas to streams. However, the contributions of different sediment sources to suspended sediment loads within intensively managed watersheds in the Midwest still remain insufficiently explored. This study aims to assess the provenance of suspended sediment and the relation between channel morphology and production of suspended sediment in the Upper Sangamon River Basin, Illinois, USA. The 3,690-km2 Upper Sangamon River Basin is characterized by low-relief, agricultural lands dominated by row-crop agriculture. Sediment source samples were collected in the Saybrook from five potential sources: farmland, forests, floodplains, river banks, and grasslands. Event-based and accumulated suspended sediment samples were collected by ISCO automatic pump samplers and in situ suspended sediment samplers and from the stream at watershed outlet. A quantitative geochemical fingerprinting technique, combining statistically verified multicomponent signatures and an un-mixing model, was employed to estimate the relative contributions of sediment from five potential sources to the suspended sediment loads. Organic matter content, trace elements, and radionuclides from soil samples were used as potential tracers. Our preliminary results indicate that the majority of suspended sediment is derived from floodplains in the downstream portions of the watersheds, while only minor amounts of suspended sediment are derived from upland areas and banks. These results suggest that floodplain erosion during high flow events contributes to the suspended sediment.

[Particle size determination by radioisotope x-ray absorptiometry with sedimentation method].

PubMed

Matsui, Y; Furuta, T; Miyagawa, S

1976-09-01

The possibility of radioisotope X-ray absorptiometry to determine the particle size of powder in conjunction with sedimentation was investigated. The experimental accuracy was primarily determined by Cow and X-ray intensity. where Co'=weight concentration of the particle in the suspension w'=(micron/rho)l/(mu/rho)s-rhol/rhos rho; density micron/rho; mass absorption coefficient, suffix l and s indicate dispersion and particle, respectively. The radiosiotopes, Fe-55, Pu-238 and Cd-109 have high w-values over the wide range of the atomic number. However, a source of high micron value such as Fe-55 is not suitable because the optimal X-ray transmission length, Lopt is decided by the expression, micronlLopt approximately 2/(1+C'ow') by using Cd-109 AgKX-ray source, the weight size distribution of particles from the heavy elements such as PbO2 to light elements such as Al2O3 or flyash was determined.

Bank-derived material dominates fluvial sediment in a suburban Chesapeake Bay watershed

NASA Astrophysics Data System (ADS)

Cashman, M. J.; Gellis, A.; Gorman-Sanisaca, L.; Noe, G. B.; Cogliandro, V.; Baker, A.

2017-12-01

Excess fine sediment is a leading cause of ecological degradation within the Chesapeake Bay watershed. The Piedmont physiographic province, which includes parts of the Washington, D.C. metro area, has the highest sediment yields in the Chesapeake Bay. In order to effectively employ sediment mitigation measures, it is necessary to identify and quantify the contributions of sediments sources within rapidly urbanizing areas in the Piedmont. This sediment fingerprinting study examines the inputs of various sediment sources to Upper Difficult Run (14.2 km2; 22.6% impervious surface), an urbanized watershed in Fairfax County, Virginia. A source sediment library was constructed from collections of stream bank material, forest soils, and road dust from across the watershed. Target fluvial sediments were collected from fine channel margin deposits and from suspended sediment using an autosampler during 16 storm events from 2008 - 2012. Apportionment of the target samples to the source sediments was performed using Sed_SAT, a publically available toolkit for sediment fingerprinting. Bed sediment was found to be dominated by stream bank sources (mean: 96%), with minor contributions from forest (4%) and no detectable contribution from roads (0%). Suspended fine sediments were also found to predominantly originate from stream bank sources (SSC-weighted mean: 91%), with minor contributions from roads (8%), and negligible contributions from forests (1%). Stream bank sources dominated at all discharges, with the greatest contributions from overland sources found only at low discharges. On the rising limb of the hydrograph and at peak flow, sediment concentrations increased due to increasing contributions of bank material rather than surface erosion caused by overland flow. Results demonstrate that stream bank erosion is responsible for the vast majority of fine sediment occurring in this suburban basin of the Chesapeake Bay watershed. This is likely a consequence of storm-water energy characteristics in urbanized watersheds resulting in channel widening and bank failure. Thus, bank stabilization, channel restoration, and/or storm water management to attenuate stream energy may improve the ecological condition of these waterbodies.

Sources and reactivities of marine-derived organic matter in coastal sediments as determined by alkaline CuO oxidation

NASA Astrophysics Data System (ADS)

Goñi, Miguel A.; Hedges, John I.

1995-07-01

Alkaline CuO oxidation of ubiquitous biochemicals such as proteins, polysaccharides, and lipids, yields specific products, including fatty acids, diacids, and carboxylated phenols. Oxidation of a variety of marine organisms, including macrophytes, phytoplankton, zooplankton, and bacteria, yields these CuO products in characteristic patterns that can often differentiate these biological sources. Sediments from Skan Bay (Unalaska Island, Alaska) display organic carbon and total nitrogen profiles which are consistent with three kinetically distinct pools of organic matter. The CuO fingerprints of these sediments distinguish these three pools at the molecular level, indicating a highly labile, fatty acid-rich surface organic layer of likely bacterial origin, intermediately reactive kelp debris and a background of phytoplankton remains that predominates at depth. The CuO method, which has been previously applied only to characterize cutin and lignin constituents of vascular land plants, also provides information on other types of abundant biochemicals, including those indicative of marine sources.

Geochemical assessment of heavy metals pollution in surface sediments of Vellar and Coleroon estuaries, southeast coast of India.

PubMed

Nethaji, S; Kalaivanan, R; Arya Viswam; Jayaprakash, M

2017-02-15

Surface sediments were collected from Vellar and Coleroon estuaries for determine sediment texture, calcium carbonate, organic matter and heavy metals. Pollution indices such as pollution load index (PLI), contamination factor (CF), enrichment factor (EF) and geo-accumulation index (I geo ) were done for this study to know the level of heavy metals pollution in the estuarine ecosystem. Pearson correlation matrix and factor were used to assess the relationship and source of heavy metals in the estuarine sediments. The results of PLI values reveal that the study area was polluted by all the heavy metals. The calculated values of CF and I geo followed the decreasing order Cu>Ni>Pb>Co>Cr>Zn>Mn>Fe and illustrate that Cu, Ni and Pb are contaminated due to anthropogenic sources in both estuaries. Correlation and factor analysis suggest that FeMn oxyhydroxides, organic matter and fine particles are responsible for high concentration of heavy metals. Copyright © 2016 Elsevier Ltd. All rights reserved.

Time series of suspended-solids concentration, salinity, temperature, and total mercury concentration in San Francisco Bay during water year 1998

USGS Publications Warehouse

Ruhl, Catherine A.; Schoellhamer, David H.

2001-01-01

The transport and fate of suspended sediments are important factors in determining the transport and fate of constituents adsorbed on the sediments. For example, the concentration of suspended particulate chromium in the bay appears to be controlled primarily by sediment resuspension (Abu-Saba and Flegal, 1995). Concentrations of dissolved trace elements are greater in South Bay than elsewhere in San Francisco Bay, and bottom sediments are believed to be a significant source (Flegal et al., 1991). The sediments on the bay bottom provide habitat for benthic communities that can ingest these substances and introduce them into the food web (Luoma et al., 1985; Brown and Luoma, 1995, Luoma 1996). Bottom sediments also are a reservoir of nutrients that contribute to the maintenance of estuarine productivity (Hammond et al., 1985).

Controlling factors of spatial and temporal preservation of the geochronological signal in sediments during an orogenic cycle

NASA Astrophysics Data System (ADS)

Rat, Juliette; Mouthereau, Frédéric; Bernet, Matthias; Brichau, Stéphanie; Balvay, Mélanie; Garzanti, Eduardo; Ando, Sergio

2017-04-01

Detrital content of sediments preserved in basins provide constraints on the nature of source rocks, dynamics of sediment transport, and potentially on tectonics and climate changes. U-Pb dating method on detrital zircon is ideally suited for provenance studies due to the ability of U-Pb age data to resist several orogenic cycles. However, with the aim to track sediment source evolution over a single orogenic cycle and determine characteristic time and parameters controlling the geochronological signal preservation throughout the cycle from rifting, mountain building to post-collision evolution, low-temperature thermochronology combined with sediment petrography are more appropriate than the U-Pb dating approach taken alone. To better understanding processes at play in the long-term geochronological signal preservation we focus on the sediment record associated with the Iberia plate tectonic evolution, which is part of the OROGEN research project, co-financed by BRGM, TOTAL & CNRS. The Iberian plate recorded a period of extension in the Late Jurassic, followed during the Early Cretaceous (Aptian-Albian) by a major thinning event documented by thick syn-rift sediments in intraplate basins and plate-scale heating/cooling of the Iberia crust, as argued by published fission track ages. Paleogeographic reconstructions that are based on stratigraphic and lithofacies analyses in northern Iberia (Iberian Range, Pyrenees and Basque-Cantabrians Range), describe a large domain of continental/fluvial and shallow-marine siliciclastic deposition. The related detrital content was then recycled during the subsequent Pyrenean orogenic phase in the Ebro foreland basin, and eventually transfer to the Mediterranean realm during post-orogenic re-excavation of the Ebro basin. In this study, we complete the published time-temperature paths in the mesozoic syn-rift basins by providing new thermo-chronological analyses of well-dated syn-collision and post-collision stratigraphic sections of the Ebro basin to determine thermal control on preservation through burial and geothermal evolution. We combined this study with sediments petrography analyses to identify relative control of source petrography, hydraulic sorting, alteration and diagenesis processes on the signal preservation during sediment transfer. All these observations will ultimately be incorporated in a geodynamic reconstruction of Iberia, and compared with age predictions from a model coupling surface processes and thermal evolution.

Inferring tidal wetland stability from channel sediment fluxes: observations and a conceptual model

USGS Publications Warehouse

Ganju, Neil K.; Nidzieko, Nicholas J.; Kirwan, Matthew L.

2013-01-01

Anthropogenic and climatic forces have modified the geomorphology of tidal wetlands over a range of timescales. Changes in land use, sediment supply, river flow, storminess, and sea level alter the layout of tidal channels, intertidal flats, and marsh plains; these elements define wetland complexes. Diagnostically, measurements of net sediment fluxes through tidal channels are high-temporal resolution, spatially integrated quantities that indicate (1) whether a complex is stable over seasonal timescales and (2) what mechanisms are leading to that state. We estimated sediment fluxes through tidal channels draining wetland complexes on the Blackwater and Transquaking Rivers, Maryland, USA. While the Blackwater complex has experienced decades of degradation and been largely converted to open water, the Transquaking complex has persisted as an expansive, vegetated marsh. The measured net export at the Blackwater complex (1.0 kg/s or 0.56 kg/m2/yr over the landward marsh area) was caused by northwesterly winds, which exported water and sediment on the subtidal timescale; tidally forced net fluxes were weak and precluded landward transport of suspended sediment from potential seaward sources. Though wind forcing also exported sediment at the Transquaking complex, strong tidal forcing and proximity to a turbidity maximum led to an import of sediment (0.031 kg/s or 0.70 kg/m2/yr). This resulted in a spatially averaged accretion of 3.9 mm/yr, equaling the regional relative sea level rise. Our results suggest that in areas where seaward sediment supply is dominant, seaward wetlands may be more capable of withstanding sea level rise over the short term than landward wetlands. We propose a conceptual model to determine a complex's tendency toward stability or instability based on sediment source, wetland channel location, and transport mechanisms. Wetlands with a reliable portfolio of sources and transport mechanisms appear better suited to offset natural and anthropogenic loss.

Use of sediment source fingerprinting to assess the role of subsurface erosion in the supply of fine sediment in a degraded catchment in the Eastern Cape, South Africa.

PubMed

Manjoro, Munyaradzi; Rowntree, Kate; Kakembo, Vincent; Foster, Ian; Collins, Adrian L

2017-06-01

Sediment source fingerprinting has been successfully deployed to provide information on the surface and subsurface sources of sediment in many catchments around the world. However, there is still scope to re-examine some of the major assumptions of the technique with reference to the number of fingerprint properties used in the model, the number of model iterations and the potential uncertainties of using more than one sediment core collected from the same floodplain sink. We investigated the role of subsurface erosion in the supply of fine sediment to two sediment cores collected from a floodplain in a small degraded catchment in the Eastern Cape, South Africa. The results showed that increasing the number of individual fingerprint properties in the composite signature did not improve the model goodness-of-fit. This is still a much debated issue in sediment source fingerprinting. To test the goodness-of-fit further, the number of model repeat iterations was increased from 5000 to 30,000. However, this did not reduce uncertainty ranges in modelled source proportions nor improve the model goodness-of-fit. The estimated sediment source contributions were not consistent with the available published data on erosion processes in the study catchment. The temporal pattern of sediment source contributions predicted for the two sediment cores was very different despite the cores being collected in close proximity from the same floodplain. This highlights some of the potential limitations associated with using floodplain cores to reconstruct catchment erosion processes and associated sediment source contributions. For the source tracing approach in general, the findings here suggest the need for further investigations into uncertainties related to the number of fingerprint properties included in un-mixing models. The findings support the current widespread use of ≤5000 model repeat iterations for estimating the key sources of sediment samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sources of suspended sediment in the Lower Roanoke River, NC

NASA Astrophysics Data System (ADS)

Jalowska, A. M.; McKee, B. A.; Rodriguez, A. B.; Laceby, J. P.

2015-12-01

The Lower Roanoke River, NC, extends 220 km from the fall line to the bayhead delta front in the Albemarle Sound. The Lower Roanoke is almost completely disconnected from the upper reaches by a series of dams, with the furthest downstream dam located at the fall line. The dams effectively restrict the suspended sediment delivery from headwaters, making soils and sediments from the Lower Roanoke River basin, the sole source of suspended sediment. In flow-regulated rivers, bank erosion, especially mass wasting, is the major contributor to the suspended matter. Additional sources of the suspended sediment considered in this study are river channel, surface soils, floodplain surface sediments, and erosion of the delta front and prodelta. Here, we examine spatial and temporal variations in those sources. This study combined the use of flow and grain size data with a sediment fingerprinting method, to examine the contribution of surface and subsurface sediments to the observed suspended sediment load along the Lower Roanoke River. The fingerprinting method utilized radionuclide tracers 210Pb (natural atmospheric fallout), and 137Cs (produced by thermonuclear bomb testing). The contributions of surface and subsurface sources to the suspended sediment were calculated with 95% confidence intervals using a Monte-Carlo numerical mixing model. Our results show that with decreasing river slope and changing hydrography along the river, the contribution of surface sediments increases and becomes a main source of sediments in the Roanoke bayhead delta. At the river mouth, the surface sediment contribution decreases and is replaced by sediments eroded from the delta front and prodelta. The area of high surface sediment contribution is within the middle and upper parts of the delta, which are considered net depositional. Our study demonstrates that floodplains, often regarded to be a sediment sink, are also a sediment source, and they should be factored into sediment, carbon and nutrient budgets.

Bioavailability of sediment-bound contaminants and the importance of digestive history

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weston, D.P.; Penry, D.L.; Baker, J.E.

1994-12-31

It is generally recognized that animals will optimize their gain of energy and nutrients from a given food source, and acclimation processes operating over a period of days are important to this optimization. This research investigates whether the bioavailability of sediment-bound contaminants varies as a function of acclimation period to a given sediment type. In other words, would the bioavailability of a sediment-associated contaminant be determined by whether the animal had in the recent past fed on a sediment with similar physical characteristics? If this dependence did exist, it could be of considerable importance to sediment toxicity testing and toxicokineticmore » modeling. The polychaete, Abarenicola Pacifica, was exposed to sediments spiked with phenanthrene and benzo(a)pyrene. Bioavailability of these contaminants was determined both by assimilation efficiency and body burden. Preliminary data suggest that PAH bioavailability is not a function of digestive history, i.e., the rate or efficiency of PAH uptake was not dependent upon whether the animal had spent a pre-exposure period in sediment physically similar to the contaminated material. This observation would support either: (1) minimal importance of digestion as a route of PAH uptake, or (2) passive uptake of PAH across the gut wall with little involvement of enzymatic digestion.« less

Bioavailability of sediment-bound contaminants and the importance of digestive history

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weston, D.P.; Penry, D.L.; Baker, J.E.

1995-12-31

It is generally recognized that animals will optimize their gain of energy and nutrients from a given food source, and acclimation processes operating over a period of days are important to this optimization. This research investigates whether the bioavailability of sediment-bound contaminants varies as a function of acclimation period to a given sediment type. In other words, would the bioavailability of a sediment-associated contaminant be determined by whether the animal had, in the recent past, fed on a sediment with similar physical characteristics? If this dependence did exist, it could be of considerable importance to sediment toxicity testing and toxico-kineticmore » modeling. The polychaete, Abarenicola pacifica, was exposed to sediments spiked with phenanthrene and benzo(a)pyrene. Bioavailability of these contaminants was determined both by assimilation efficiency and body burden. The data suggest that PAH bioavailability is not a function of digestive history, i.e., the rate or efficiency of PAH uptake was not dependent upon whether the animal had spent a pre-exposure period in sediment physically similar to the contaminated material. This observation would support either: (1) minimal importance of digestion as a route of PAH uptake, or (2) passive uptake of PAH across the gut wall with little involvement of enzymatic digestion.« less

Sources and transport of sediment, nutrients, and oxygen-demanding substances in the Minnesota River basin, 1989-92

USGS Publications Warehouse

Payne, G.A.

1994-01-01

The Minnesota River, 10 major tributaries, and 21 springs were sampled to determine the sources and transport of sediment, nutrients, and oxygen- demanding substances. The study was part of a four-year assessment of non-point source pollution in the Minnesota River Basin. Runoff from tributary watersheds was identified as the primary source of suspended sediment and nutrients in the Minnesota River mainstem. Suspended-sediment, phosphorus, and nitrate concentrations were elevated in all major tributaries during runoff, but tributaries in the south-central and eastern part of the basin produce the highest annual loading to the mainstem because of higher annual precipitation and runoff in that part of the basin. Particle-size analyses showed that most of the suspended sediment in transport consisted of silt- and clay-size material. Phosphorus enrichment was indicated throughout the mainstem by total phosphorus concentrations that ranged from 0.04 to 0.48 mg/L with a median value of 0.22 mg/L, and an interquartile range of 0.15 to 0.29 mg/L. Nitrate concentrations periodically exceeded drinking water standards in tributaries draining the south-central and eastern part of the basin. Oxygen demand was most elevated during periods of summer low flow. Correlations between levels of biochemical oxygen demand and levels of algal productivity suggest that algal biomass comprises much of the oxygen-demanding material in the mainstem. Transport of sediment, nutrients, and organic carbon within the mainstem was found to be conservative, with nearly all tributary inputs being transported downstream. Uptake and utilization of nitrate and orthophosphorus was indicated during low flow, but at normal and high flow, inputs of these constituents greatly exceeded biological utilization.

Total nitrogen and suspended-sediment loads and identification of suspended-sediment sources in the Laurel Hill Creek watershed, Somerset County, Pennsylvania, water years 2010-11

USGS Publications Warehouse

Sloto, Ronald A.; Gellis, Allen C.; Galeone, Daniel G.

2012-01-01

Laurel Hill Creek is a watershed of 125 square miles located mostly in Somerset County, Pennsylvania, with small areas extending into Fayette and Westmoreland Counties. The upper part of the watershed is on the Pennsylvania Department of Environmental Protection 303(d) list of impaired streams because of siltation, nutrients, and low dissolved oxygen concentrations. The objectives of this study were to (1) estimate the annual sediment load, (2) estimate the annual nitrogen load, and (3) identify the major sources of fine-grained sediment using the sediment-fingerprinting approach. This study by the U.S. Geological Survey (USGS) was done in cooperation with the Somerset County Conservation District. Discharge, suspended-sediment, and nutrient data were collected at two streamflow-gaging stations—Laurel Hill Creek near Bakersville, Pa., (station 03079600) and Laurel Hill Creek at Ursina, Pa., (station 03080000)—and one ungaged stream site, Laurel Hill Creek below Laurel Hill Creek Lake at Trent (station 03079655). Concentrations of nutrients generally were low. Concentrations of ammonia were less than 0.2 milligrams per liter (mg/L), and concentrations of phosphorus were less than 0.3 mg/L. Most concentrations of phosphorus were less than the detection limit of 0.02 mg/L. Most water samples had concentrations of nitrate plus nitrite less than 1.0 mg/L. At the Bakersville station, concentrations of total nitrogen ranged from 0.63 to 1.3 mg/L in base-flow samples and from 0.57 to 1.5 mg/L in storm composite samples. Median concentrations were 0.88 mg/L in base-flow samples and 1.2 mg/L in storm composite samples. At the Ursina station, concentrations of total nitrogen ranged from 0.25 to 0.92 mg/L in base-flow samples; the median concentration was 0.57 mg/L. The estimated total nitrogen load at the Bakersville station was 262 pounds (lb) for 11 months of the 2010 water year (November 2009 to September 2010) and 266 lb for the 2011 water year. Most of the total nitrogen loading was from stormflows. The stormflow load accounted for 76.6 percent of the total load for the 2010 water year and 80.6 percent of the total load for the 2011 water year. The estimated monthly total nitrogen loads were higher during the winter and spring (December through May) than during the summer (June through August). For the Bakersville station, the estimated suspended-sediment load (SSL) was 17,700 tons for 11 months of the 2010 water year (November 2009 to September 2010). The storm beginning January 24, 2010, provided 34.4 percent of the annual SSL, and the storm beginning March 10, 2010, provided 31.9 percent of the annual SSL. Together, these two winter storms provided 66 percent of the annual SSL for the 2010 water year. For the 2011 water year, the estimated annual SSL was 13,500 tons. For the 2011 water year, the SSLs were more evenly divided among storms than for the 2010 water year. Seven of 37 storms with the highest SSLs provided a total of 65.7 percent of the annual SSL for the 2011 water year; each storm provided from 4.6 to 12.3 percent of the annual SSL. The highest cumulative SSL for the 2010 and 2011 water years generally occurred during the late winter. Stormflows with the highest peak discharges generally carried the highest SSL. The sediment-fingerprinting approach was used to quantify sources of fine-grained suspended sediment in the watershed draining to the Laurel Hill Creek near Bakersville streamflow-gaging station. Sediment source samples were collected from five source types: 20 from cropland, 9 from pasture, 18 from forested areas, 20 from unpaved roads, and 23 from streambanks. At the Bakersville station, 10 suspended-sediment samples were collected during 6 storms for sediment-source analysis. Thirty-five tracers from elemental analysis and 4 tracers from stable isotope analysis were used to fingerprint the source of sediment for the 10 storm samples. Statistical analysis determined that cropland and pasture could not be discriminated by the set of tracers and were combined into one source group—agriculture. Stepwise discriminant function analysis determined that 11 tracers best described the 4 sources. An "unmixing" model applied to the 11 tracers showed that agricultural land (cropland and pasture) was the major source of sediment, contributing an average of 53 percent of the sediment for the 10 storm samples. Streambanks, unpaved roads, and forest contributions for the 10 storm samples averaged 30, 17, and 0 percent, respectively. Agriculture was the major contributor of sediment during the highest sampled stormflows. The highest stormflows also produced the highest total nitrogen and suspended-sediment loads.

Flow regulation manipulates contemporary seasonal sedimentary dynamics in the reservoir fluctuation zone of the Three Gorges Reservoir, China.

PubMed

Tang, Qiang; Bao, Yuhai; He, Xiubin; Fu, Bojie; Collins, Adrian L; Zhang, Xinbao

2016-04-01

Since the launch of the Three Gorges Dam on the Yangtze River, a distinctive reservoir fluctuation zone has been created and significantly modified by regular dam operations. Sediment redistribution within this artificial landscape differs substantially from that in natural fluvial riparian zones, due to a specific hydrological regime comprising steps of water impoundment with increasing magnitudes and seasonal water level fluctuation holding a range of sediment fluxes. This study reinterpreted post-dam sedimentary dynamics in the reservoir fluctuation zone by stratigraphy determination of a 345-cm long sediment core, and related it to impact of the hydrological regime. Seasonality in absolute grain-size composition of suspended sediment was applied as a methodological basis for stratigraphic differentiation. Sedimentary laminations with relatively higher proportions of sandy fractions were ascribed to sedimentation during the dry season when proximal subsurface bank erosion dominates source contributions, while stratigraphy with a lower proportion of sandy fractions is possibly contributed by sedimentation during the wet season when distal upstream surface erosion prevails. Chronology determination revealed non-linear and high annual sedimentation rates ranging from 21.7 to 152.1cm/yr. Although channel geomorphology may primarily determine the spatial extent of sedimentation, seasonal sedimentary dynamics was predominantly governed by the frequency, magnitude, and duration of flooding. Summer inundation by natural floods with enhanced sediment loads produced from upstream basins induced higher sedimentation rates than water impoundment during the dry season when distal sediment supply was limited. We thus conclude that flow regulation manipulates contemporary seasonal sedimentary dynamics in the reservoir fluctuation zone, though little impact on total sediment retention rate was detected. Ongoing reductions in flow and sediment supply under human disturbance may have profound implications in affecting sedimentary equilibrium in the reservoir fluctuation zone. The results herein provide insights of how big dams have disrupted the sediment conveyance processes of large scale fluvial systems. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessment of the anthropogenic influx of metallic pollutants in the Sefidrud delta, Gilan Province, Iran.

PubMed

Rafiei, Behrouz; Ahmadi-Ghomi, Fatemeh; Karimkhani, Afshin

2017-08-15

Understanding the anthropogenic effects on the Sefidrud delta, the concentration of six metals (Cr, Co, Cu, Ni, Pb and Zn) was measured in two sites included the old Sefidrud delta (Amirabad, 23 samples) and the new Sefidrud delta (Kiashahr, 24 samples). Geoaccumulation Index (I geo ), Enrichment Factor (EF), Contamination Factor (CF) and Pollution Load Index (PLI) were used to determine the metal pollution in all sediment samples. Although the EF, I geo , CF and PLI results in the old delta indicate no significant pollution, sediment samples in the new delta show a considerable pollution. Since the sediment source and the lithology of the Sefidrud River drainage basin did not change in the past 500years, the metal pollution in the new delta must be from anthropogenic sources. Copyright © 2017 Elsevier Ltd. All rights reserved.

Twenty years of water-quality studies in the Cheney Reservoir Watershed, Kansas, 1996-2016

USGS Publications Warehouse

Graham, Jennifer L.; Foster, Guy M.; Kramer, Ariele R.

2017-03-31

Since 1996, the U.S. Geological Survey (USGS), in cooperation with the City of Wichita, has done studies in the Cheney Reservoir watershed to understand environmental effects on water-quality conditions. Early studies (1996–2001) determined subwatershed sources of contaminants, nutrient and sediment loading to Cheney Reservoir, changes in reservoir sediment quality over time, and watershed sources of phosphorus. Later studies (2001–present) focused on nutrient and sediment concentrations and mass transport from the watershed; the presence of cyanobacteria, cyanotoxins, and taste-and-odor compounds in the reservoir; and development of regression models for real-time computations of water-quality constituents of interest that may affect drinking-water treatment. This fact sheet summarizes key results from studies done by the USGS during 1996–2016 in the Cheney Reservoir watershed and Cheney Reservoir.

Fluvial sediment in the environment: a national challenge

USGS Publications Warehouse

Larsen, Matthew C.; Gellis, Allen C.; Glysson, G. Douglas; Gray, John R.; Horowitz, Arthur J.

2010-01-01

Sediment and sediment-associated constituents can contribute substantially to water-quality impairment. In the past, sediment was viewed mainly as an engineering problem that affected reservoir storage capacity, shipping channel maintenance, and bridge scour, as well as the loss of agricultural soil. Sediment is now recognized as a major cause of aquatic system degradation in many rivers and streams as a result of light attenuation, loss of spawning substrate due to fine-grained sediment infilling, reduction in primary productivity, decreases in biotic diversity, and effects from sediment-associated chemical constituents. Recent advances in sediment measurement, assessment, source-identification, and analytical protocols provide new capabilities to quantify sediment and solid-phase chemical fluxes in aquatic systems. Developing, maintaining, and augmenting current sediment- and water-quality-monitoring networks is essential for determining the health of U.S. waterways and for evaluating the effectiveness of management actions in reducing sediment-related problems. The application of new scientific capabilities that address the adverse effects of sediment and sediment- associated constituents represents a major step in managing the Nation’s water quality. A robust Federal, national-scale eff rt, in collaboration with vested stakeholders, is needed to address these sediment-related water-quality issues across the United States.

Use of Passive Samplers to Determine the Source of Dissolved PAHs in the Ottawa River, Toledo, Ohio

EPA Science Inventory

As part of a larger study on the remedy effectiveness on the Ottawa River, (Ohio, USA), research was focused on the source of PAHs to water and sediment. Polyethylene passive samplers, or polyethylene devices (PEDs), were deployed and analyzed, along with whole water samples and...

Sediment Flux and Storage in a Rural Southeastern Piedmont River System

NASA Astrophysics Data System (ADS)

Jackson, C. R.; Martin, J. K.

2001-12-01

A sediment budget was developed for a representative rural southeastern Piedmont watershed to provide information on the relative importance of sediment sources. Sediment issues in the southeastern Piedmont are complicated by the so-called legacy sediment produced by poor farming practices during the cotton-farming era, approximately 1810-1930. The Murder Creek basin near Monticello, GA was chosen because: it featured forestry and agriculture as the principal land uses; a USGS gage provided a flow record; and the creek deposited in a reservoir built in 1948. Suspended load export was calculated using a sediment rating curve and the USGS flow time series. Bed load export was determined by estimating the volume of sediment deposited in the reservoir since construction. Unpaved road erosion was estimated using the WEPP model, and other surface erosion was estimated using USLE and delivery ratios. Historical floodplain storage was determined by coring floodplain deposits, measuring the depth to the pre-historic/historic sediment interface, and multiplying by the area of the floodplain. Recent accretion rates were estimated using dendrogeomorphology. Results showed that the practices of the cotton farming era deposited an average of 1.6 meters of sediment on the floodplains. This depth was relatively uniform across the watershed. The cotton-farming sediment in storage exceeds the current annual export by a factor of about 5000. Approximately half of the current export comes from current inputs, and half comes from remobilized floodplain sediments.

Understanding sediment sources in a peri-urban Mediterranean catchment using geochemical tracers

NASA Astrophysics Data System (ADS)

Ferreira, Carla; Walsh, Rory; Kikuchi, Ryunosuke; Blake, Will

2016-04-01

One of the main physical environmental impacts of urbanization is an increase in suspended sediment concentrations and loads, particularly in the constructional phase. Impacts in peri-urban catchments characterized by a mosaic of urban and non-urban landscape elements with varying roles in acting as sources and sinks of overland flow and slope wash have received little attention, particularly in Mediterranean environments. The present study uses a sediment 'fingerprinting' approach to determine the main sediment sources in the peri-urban Ribeira dos Covões catchment (6.2km2) in Portugal and how they change during storm events following contrasting antecedent weather. The catchment, rural until 1972, underwent discontinuous urbanization in 1973-1993, followed by an urban consolidation phase. Currently, its land-use is a complex mosaic of woodland (56%), urban (40%) and agricultural (4%) land parcels. Distinct urban patterns include some well-defined urban residential centres, but also areas of discontinuous urban sprawl. Since 2010, a major road was built and an enterprise park has been under construction, covering 1% and 5% of the catchment, respectively. The catchment has a Mediterranean climate. The geology comprises sandstone (56%), limestone (41%) and alluvial deposits (3%). Soils are generally deep (>3.0m), but shallow (<0.4m) on steeper limestone terrain. The catchment has an average slope of 9° , but includes steep slopes of up to 46° . The sediment fingerprinting methodology involved characterizing the chemical properties of sediments from individual upstream sub-catchments and comparing these to the properties of downstream transported fluvial material. Three fine bed-sediment sampling surveys were carried out after (i) a long dry period (21/09/2012), (ii) a winter storm of relatively high rainfall intensity (23.2mm day-1) (19/02/2015), and (iii) after several storms in Spring (22/04/2015). All samples were oven-dried (at 38° C) and sieved to obtain different particle size fractions (0.125-2.000mm, 0.063-0.125mm and <0.063mm). Seventeen stream sites were sampled plus a sample of sediment from a road surface immediately it entered the stream network. The elemental composition (40 elements) of each size fraction was assessed using a Niton X-ray fluorescence elemental analyser. Results show that rock type has a profound influence on the geochemical properties of bed-sediments. Catchment outlet sediment collected after the summer and a storm of high rainfall intensity following dry weather displayed geochemical properties closer to those of sediment from sandstone sub-catchments, and in particularly sediment from the enterprise park under construction. After the storm that followed very wet weather, however, limestone areas became of much greater significance as sediment sources, probably because of the high soil saturation. At limestone stream sites receiving runoff from the newly constructed road, fine bed-sediment geochemistry was found to be similar to that of road sediment, indicating a high contribution of this source. These results are supported by spatio-temporal differences in streamflow and suspended sediment concentrations at instrumented monitoring stations. It is concluded that this methodology represents a potentially useful tool to enable river managers to detect and assess sediment sources in urbanized and partly urbanized catchments, and to supporting them in designing and implementing effective land-use mosaics and site-specific measures to mitigate erosion.

Stream Sediment Sources in Midwest Agricultural Basins with Land Retirement along Channel.

PubMed

Williamson, T N; Christensen, V G; Richardson, W B; Frey, J W; Gellis, A C; Kieta, K A; Fitzpatrick, F A

2014-09-01

Documenting the effects of agricultural land retirement on stream-sediment sources is critical to identifying management practices that improve water quality and aquatic habitat. Particularly difficult to quantify are the effects from conservation easements that commonly are discontinuous along channelized streams and ditches throughout the agricultural midwestern United States. Our hypotheses were that sediment from cropland, retired land, stream banks, and roads would be discernible using isotopic and elemental concentrations and that source contributions would vary with land retirement distribution along tributaries of West Fork Beaver Creek in Minnesota. Channel-bed and suspended sediment were sampled at nine locations and compared with local source samples by using linear discriminant analysis and a four-source mixing model that evaluated seven tracers: In, P, total C, Be, Tl, Th, and Ti. The proportion of sediment sources differed significantly between suspended and channel-bed sediment. Retired land contributed to channel-bed sediment but was not discernible as a source of suspended sediment, suggesting that retired-land material was not mobilized during high-flow conditions. Stream banks were a large contributor to suspended sediment; however, the percentage of stream-bank sediment in the channel bed was lower in basins with more continuous retired land along the riparian corridor. Cropland sediments had the highest P concentrations; basins with the highest cropland-sediment contributions also had the highest P concentrations. Along stream reaches with retired land, there was a lower proportion of cropland material in suspended sediment relative to sites that had almost no land retirement, indicating less movement of nutrients and sediment from cropland to the channel as a result of land retirement. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Stream sediment sources in midwest agricultural basins with land retirement along channel

USGS Publications Warehouse

Williamson, Tanja N.; Christensen, Victoria G.; Richardson, William B.; Frey, Jeffrey W.; Gellis, Allen C.; Kieta, K. A.; Fitzpatrick, Faith A.

2014-01-01

Documenting the effects of agricultural land retirement on stream-sediment sources is critical to identifying management practices that improve water quality and aquatic habitat. Particularly difficult to quantify are the effects from conservation easements that commonly are discontinuous along channelized streams and ditches throughout the agricultural midwestern United States. Our hypotheses were that sediment from cropland, retired land, stream banks, and roads would be discernible using isotopic and elemental concentrations and that source contributions would vary with land retirement distribution along tributaries of West Fork Beaver Creek in Minnesota. Channel-bed and suspended sediment were sampled at nine locations and compared with local source samples by using linear discriminant analysis and a four-source mixing model that evaluated seven tracers: In, P, total C, Be, Tl, Th, and Ti. The proportion of sediment sources differed significantly between suspended and channel-bed sediment. Retired land contributed to channel-bed sediment but was not discernible as a source of suspended sediment, suggesting that retired-land material was not mobilized during high-flow conditions. Stream banks were a large contributor to suspended sediment; however, the percentage of stream-bank sediment in the channel bed was lower in basins with more continuous retired land along the riparian corridor. Cropland sediments had the highest P concentrations; basins with the highest cropland-sediment contributions also had the highest P concentrations. Along stream reaches with retired land, there was a lower proportion of cropland material in suspended sediment relative to sites that had almost no land retirement, indicating less movement of nutrients and sediment from cropland to the channel as a result of land retirement.

Surface-water-quality assessment of the Yakima River basin in Washington; spatial and temporal distribution of trace elements in water, sediment, and aquatic biota, 1987-91; with a section on geology

USGS Publications Warehouse

Fuhrer, Gregory J.; Cain, Daniel J.; McKenzie, Stuart W.; Rinella, Joseph F.; Crawford, J. Kent; Skach, Kenneth A.; Hornberger, Michelle I.; Gannett, Marshall W.

1999-01-01

The report describes the distribution of trace elements in sediment, water, and aquatic biota in the Yakima River basin, Washington. Trace elements were determined from streambed sediment, suspended sediment, filtered and unfiltered water samples, aquatic insects, clams, fish livers, and fish fillets between 1987 and 1991. The distribution of trace elements in these media was related to local geology and anthropogenic sources. Additionally, annual and instantaneous loads were estimated for trace elements associated with suspended sediment and trace elements in filtered water samples. Trace elements also were screened against U.S. Environmental Protection Agency guidelines established for the protection of human health and aquatic life.

Recent progress in the development of a SPARROW model of sediment for the conterminous U.S.

USGS Publications Warehouse

Schwarz, Gregory; Smith, Richard; Alexander, Richard; Gray, John

2003-01-01

Suspended sediment has long been recognized as an important contaminant affecting water resources. Besides its direct role in determining water clarity, bridge scour and reservoir storage, sediment serves as a vehicle for the transport of many binding contaminants, including nutrients, trace metals, semi- volatile organic compounds, and numerous pesticides (U.S. Environmental Protection Agency 2000a). Recent efforts to address water quality concerns through the TMDL process have identified sediment as the single most prevalent cause of impairment in the Nation’s streams and rivers (U.S. Environmental Protection Agency 2000b). Moreover, sediment has been identified as a medium for the transport and sequestration of organic carbon, playing a potentially important role in understanding sources and sinks in the global carbon budget (Stallard 1998).

Sediment source fingerprinting as an aid to catchment management: A review of the current state of knowledge and a methodological decision-tree for end-users

USGS Publications Warehouse

Collins, A.L; Pulley, S.; Foster, I.D.L; Gellis, Allen; Porto, P.; Horowitz, A.J.

2017-01-01

The growing awareness of the environmental significance of fine-grained sediment fluxes through catchment systems continues to underscore the need for reliable information on the principal sources of this material. Source estimates are difficult to obtain using traditional monitoring techniques, but sediment source fingerprinting or tracing procedures, have emerged as a potentially valuable alternative. Despite the rapidly increasing numbers of studies reporting the use of sediment source fingerprinting, several key challenges and uncertainties continue to hamper consensus among the international scientific community on key components of the existing methodological procedures. Accordingly, this contribution reviews and presents recent developments for several key aspects of fingerprinting, namely: sediment source classification, catchment source and target sediment sampling, tracer selection, grain size issues, tracer conservatism, source apportionment modelling, and assessment of source predictions using artificial mixtures. Finally, a decision-tree representing the current state of knowledge is presented, to guide end-users in applying the fingerprinting approach.

Determination and Distribution of Polycyclic Aromatic Hydrocarbons in Rivers, Sediments and Wastewater Effluents in Vhembe District, South Africa

PubMed Central

Edokpayi, Joshua N.; Odiyo, John O.; Popoola, Oluwaseun E.; Msagati, Titus A. M.

2016-01-01

Polycyclic aromatic hydrocarbons are very toxic and persistent environmental contaminants. This study was undertaken to assess the concentrations and possible sources of 16 PAHs (Polycyclic aromatic hydrocarbons) classified by the United State Environmental Protection Agency as priority pollutants in water and sediments of the Mvudi and Nzhelele Rivers. Effluents from Thohoyandou wastewater treatment plant and Siloam waste stabilization ponds were also investigated. Diagnostic ratios were used to evaluate the possible sources of PAHs. PAHs in the water samples were extracted using 1:1 dichloromethane and n-hexane mixtures, while those in the sediment samples were extracted with 1:1 acetone and dichloromethane using an ultrasonication method. The extracts were purified using an SPE technique and reconstituted in n-hexane before analyses with a gas chromatograph time of flight—mass spectrometer. The results obtained indicate the prevalence of high molecular weight PAHs in all the samples. PAHs concentrations in water and sediment samples from all the sampling sites were in the range of 13.174–26.382 mg/L and 27.10–55.93 mg/kg, respectively. Combustion of biomass was identified as the major possible source of PAHs. Effluents from wastewater treatment facilities were also considered as major anthropogenic contributions to the levels of PAHs found in both river water and sediments. Mvudi and Nzhelele Rivers show moderate to high contamination level of PAHs. PMID:27043597

Assessment and ecological indicators of total and polycyclic aromatic hydrocarbons in the aquatic environment of lake Manzala, Egypt.

PubMed

El-Kady, Ahmed A; Wade, Terry L; Sweet, Stephen T

2018-04-06

The study objective was to assess the profile of aliphatic and polycyclic aromatic hydrocarbons in the aquatic environment of Lake Manzala and to determine the potential sources and effects of these hydrocarbons. To reach these objectives 24 surface sediment and 24 tilapia fish were collected and analyzed using GC-FID and GC-MS. The highest concentrations for n-alkanes (∑n-C 15-35 ) (19,625 ng g -1 ) and PAHs (∑45PAHs) (5,153 ng g -1 ) were found in sediments collected from Bahr Al-Baqar drain while Al-Temsah and Al-Hamra sites contained the lowest concentrations. Different diagnostic molecular ratios for hydrocarbons were used to evaluate sources of the hydrocarbons. The hydrocarbons were found to have differing proportions of petrogenic, pyrogenic, and biogenic sources. Comparison to sediment quality guidelines indicated PAHs were below the effect range low (ERL) with the exception of acenaphthene, fluorine, and ∑45PAHs in Bahr Al-Baqar drain sediments. Tissue samples had moderate PAH concentrations for ∑45PAHs ranging from 302.5 ng g -1 West of Bashteer (S3) to 596 ng g -1 in Legam (S5). Since fish metabolize PAH quickly, their detection suggest continual or very recent exposure. The PAH in sediment and fish from Lake Manzala are at a low or below level of environmental concern.

Using multiple composite fingerprints to quantify fine sediment source contributions: A new direction

USDA-ARS?s Scientific Manuscript database

Sediment source fingerprinting provides a vital means for estimating sediment source contributions, which are needed not only for soil conservation planning but also for erosion model evaluation. A single optimum composite fingerprint has been widely used in the literature to estimate sediment prov...

Subtropical freshwater storages: a major source of nitrous oxide and methane?

NASA Astrophysics Data System (ADS)

Sturm, Katrin; Grinham, Alistair; Yuan, Zhiguo

2013-04-01

Studies of greenhouse gas cycling in subtropical water bodies, particularly in the Southern Hemisphere, are very limited. This represents an important gap in our understanding of global emissions as the higher temperatures experienced in the subtropics will likely accelerate greenhouse gas production and consumption. Critical to understanding the net impact of these accelerated rates are detailed studies of representative systems within this region. In this paper we present a model artificial freshwater storage: Gold Creek Dam in South East Queensland, Australia. Freshwater storages are commonplace for drinking water and irrigation purposes in Australia as unpredictable rainfall patterns make river and ground water sources unreliable. Over 85 % of Australian rivers are modified with weirs and dams providing permanent inundation of previously terrestrial environments. The higher temperatures experienced at these latitudes drive thermal stratification of these systems as well as rapidly deoxygenate bottom waters. High organic matter availability in the sediment zone as well as the anoxic overlying water provide ideal conditions for reduced products (including methane and ammonia) from microbial processing to be formed and diffuse into bottom waters. A mid-water metalimnion is generally associated with large gradients in dissolved oxygen availability and reduced metabolites undergo oxidation prior to their emission from water surface. An intensive field study was undertaken to improve understanding of production and transformation rates of methane and nitrous oxide from the sediments, through the water column and to the atmosphere. Sediment nutrient (ammonia, nitrite/nitrate and filterable reactive phosphorus) and greenhouse gas (methane and nitrous oxide) porewater samples were collected at selected sites. To determine the magnitude of the benthic sediment contribution of methane and nitrous oxide to the water column sediment incubations were conducted in the laboratory. To determine the likely atmospheric flux from this water body surface floating chambers were used to collect gas. Results showed maximum methane concentrations in the sediment porewaters and deeper water column, both anoxic environments. However, nitrous oxide had highest concentrations at the oxycline zone of the water column. Sediment incubations showed clear methane efflux demonstrating the sediments to be a consistent source of methane. Sediments were either a source or sink of nitrous oxide depending on overlying dissolved oxygen concentration. Floating chamber incubations clearly demonstrated Gold Creek Dam was a source of both methane and nitrous oxide with methane an order of magnitude higher expressed as CO2 equivalents. Diffusive atmospheric fluxes of methane ranged from 20 to 450 mg m-2 d-1 and were comparable to tropical reservoirs rather than temperate reservoirs (LOUIS et al., 2000). Results are likely to be globally relevant as an increasing number of large dams are being constructed to meet growing water demand and under a warming climate process occurring in subtropical systems can give insights into future changes likely to occur in temperate systems.

Tidal river sediments in the Washington, D.C. area. 11. Distribution and sources of organic containmants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wade, T.L.; Velinsky, D.J.; Reinharz, E.

1994-06-01

Concentrations of aliphatic, aromatic, and chlorinated hydrocarbons were determined from 33 surface-sediment samples taken from the Tidal Basin, Washington Ship Channel, and the Anacostia and Potomac rivers in Washington, D.C. In conjunction with these samples, selected storm sewers and outfalls also were sampled to help elucidate general sources of contamination to the area. All of the sediments contained detectable concentrations of aliphatic and aromatic hydrocarbons, DDT (total dichlorodiphenytrichloroethande), DDE (dichlorodiphenyldichloroethene), DDD (dichlorodiphenyldichloroethane), PCBx (total polychlorinated biphenyls) and total chlordanes (oxy-, {alpha}-, and {gamma}-chlordane and cis + trans-nonachlor). Sediment concentrations of most contaminants were highest in the Anacostia River just downstreammore » of the Washington Navy Yard, except for total chlordane, which appeared to have upstream sources in addition to storm and combined sewer runoff. This area has the highest number of storm and combined sewer outfalls in the river. Potomac River stations had lower concentrations than other stations. Polycyclic aromatic hydrocarbons, saturated hydrocarbons, and the unresolved complex mixture (UCM) distributions reflect mixtures of combustion products and direct discharges of petroleum products. Sources of PCBs appear to be related to specific outfalls, while hydrocarbon inputs, especially PAHs, are diffuse, and may be related to street runoff. This study indicates that in large urban areas, nonpoint sources deliver substantial amounts of contaminants to ecosystems through storm and combined sewer systems, and control of these inputs must be addressed. 33 refs., 6 figs., 3 tabs.« less

Application of quantitative composite fingerprinting technique to identify the main sediment sources in two small catchments of Iran

NASA Astrophysics Data System (ADS)

Kouhpeima, A.; Feiznia, S.; Ahmadi, H.; Hashemi, S. A.; Zareiee, A. R.

2010-09-01

The targeting of sediment management strategies is a key requirement in developing countries including Iran because of the limited resources available. These targeting is, however hampered by the lack of reliable information on catchment sediment sources. This paper reports the results of using a quantitative composite fingerprinting technique to estimate the relative importance of the primary potential sources within the Amrovan and Royan catchments in Semnan Province, Iran. Fifteen tracers were first selected for tracing and samples were analyzed in the laboratory for these parameters. Statistical methods were applied to the data including nonparametric Kruskal-Wallis test and Differentiation Function Analysis (DFA). For Amrovan catchment three parameters (N, Cr and Co) were found to be not significant in making the discrimination. The optimum fingerprint, comprising Oc, PH, Kaolinite and K was able to distinguish correctly 100% of the source material samples. For the Royan catchment, all of the 15 properties were able to distinguish between the six source types and the optimum fingerprint provided by stepwise DFA (Cholorite, XFD, N and C) correctly classifies 92.9% of the source material samples. The mean contributions from each sediment source obtained by multivariate mixing model varied at two catchments. For Amrovan catchment Upper Red formation is the main sediment sources as this sediment source approximately supplies 36% of the reservoir sediment whereas the dominant sediment source for the Royan catchment is from Karaj formation that supplies 33% of the reservoir sediments. Results indicate that the source fingerprinting approach appears to work well in the study catchments and to generate reliable results.

Distribution of Escherichia coli and Enterococci in water, sediments, and bank soils along North Shore Channel between Bridge Street and Wilson Avenue, Metropolitan Water Reclamation District of Greater Chicago

USGS Publications Warehouse

Byappanahalli, Muruleedhara; Whitman, Richard L.; Shively, Dawn; Przybyla-Kelly, Katarzyna; Lukasik, Ashley M.

2010-01-01

The Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) wished to know the distribution and potential sources of fecal indicator bacteria, E. coli and enterococci, in water, sediments, and upland soils along an upstream and downstream portion of the North Shore Channel (NSC) that is the receiving stream for the District’s North Side Water Reclamation Plant (NSWRP) outfall. Biweekly water and sediment samples were collected between August and October 2008 and included the following locations upstream of the outfall: Bridge Street (UPS-1), Oakton Street (UPS-2), the NSWRP outfall (OF), and downstream: Foster Avenue (DNS-1), and Wilson Avenue (DNS-2). E. coli and enterococci were consistently found in water and sediments at all sampling locations, with bacterial densities in water increasing below the NSWRP outfall; bacterial densities in sediment were more variable. On a relative measurement basis (i.e., 100 ml=100 g), both E. coli and enterococci densities were significantly higher in sediments than water. E. coli and enterococci were consistently recovered from bank soil along wooded, grassy, erosional, and depositional areas at two recreational parks, as well as other riparian areas along the river. Thus, soils along the river basin are likely sources of these bacteria to the NSC channel, introduced through runoff or other physical processes. Tributaries, such as the North Branch of the Chicago River (NBCR) that flow into NSC near Albany Ave, may provide a constant source of E. coli and enterococci to the NSC. Additionally, storm sewer outfalls may increase E. coli loadings to NSC during wet weather conditions. Our findings suggest that the abundance of nonpoint sources contributing to the overall fecal indicator bacteria (FIB) load in the NSC channel may complicate bacteria source determination and remediation efforts to protect the stream water quality.

Radioactive fallout reconstruction from contemporary measurements of reservoir sediments.

PubMed

Krey, P W; Heit, M; Miller, K M

1990-11-01

The temporal history of atmospheric deposition to a watershed area can be preserved in the sediment of a lake or reservoir that is supplied by the watershed. The 137Cs and isotopic Pu concentrations with depth were determined in the sediments of two reservoirs, Enterprise and Deer Creek, which are located in widely separated regions of the state of Utah. Our data not only reconstruct the history of the total radioactive fallout in the area, but also permit estimating the contributions from global sources and from the Nevada Test Site detonations in the 1950s.

Quantitative sediment source attribution with compound-specific isotope analysis in a C3 plant-dominated catchment (central Switzerland)

NASA Astrophysics Data System (ADS)

Alewell, Christine; Birkholz, Axel; Meusburger, Katrin; Schindler Wildhaber, Yael; Mabit, Lionel

2016-03-01

As sediment loads impact freshwater systems and infrastructure, their origin in complex landscape systems is of crucial importance for sustainable management of agricultural catchments. We differentiated the sediment source contribution to a lowland river in central Switzerland by using compound-specific isotope analysis (CSIA). We found a clear distinction of sediment sources originating from forest and agricultural land use. Our results demonstrate that it is possible to reduce the uncertainty of sediment source attribution in: (i) using compound content (in our case, long-chain fatty acids; FAs) rather than soil organic matter content to transfer δ13C signal of FAs to soil contribution and (ii) restricting the investigation to the long-chain FAs (> C22 : 0) not to introduce errors due to aquatic contributions from algae and microorganisms. Results showed unambiguously that during base flow, agricultural land contributed up to 65 % of the suspended sediments, while forest was the dominant sediment source during high flow. This indicates that connectivity of sediment source areas within the river changes between base and high flow conditions. Uncertainty, which might occur in complex, large-scale studies due to undetected source attribution and/or CSSI signature degradation, is low because of limited data complexity in our study (i.e., two-three sources and two tracers). Our findings are the first published results highlighting (i) significant differences in compound-specific stable isotope (CSSI) signature of sediment sources from land uses dominated by C3 plant cultivation and (ii) the use of these differences to quantify sediment contribution to a small river.

Polychlorinated Biphenyls as Probes of Biogeochemical Processes in Rivers

USGS Publications Warehouse

Fitzgerald, S.A.; Steuer, J.J.

1997-01-01

A field study was conducted to investigate the use of PCB (polychlorinated biphenyl) congener and homolog assemblages as tracers of biogeochemical processes in the Milwaukee and Manitowoc Rivers in southeastern Wisconsin from 1993 to 1995. PCB congeners in the dissolved and suspended particle phases, along with various algal indicators (algal carbon and pigments), were quantitated in the water seasonally. In addition, PCB congener assemblages were determined seasonally in surficial bed sediments. Biogeochemical processes investigated included: determination of the source of suspended particles and bottom sediments by comparison with known Aroclor mixtures, water-solid partitioning, and algal uptake of PCBs. Seasonal differences among the PCB assemblages were observed mainly in the dissolved phase, somewhat less in the suspended particulate phase, and not at all in the bed sediments.

Distribution and Sources of Petroleum Hydrocarbons in Recent Sediments of the Imo River, SE Nigeria.

PubMed

Oyo-Ita, Inyang O; Oyo-Ita, Orok E; Dosunmu, Miranda I; Domínguez, Carmen; Bayona, Josep M; Albaigés, Joan

2016-02-01

The distribution of aliphatic and aromatic hydrocarbons in surface sediments of the lower course of the Imo River (Nigeria) was investigated to determine the sources and fate of these compounds. The aliphatic fraction is characterized by a widespread contribution of highly weathered/biodegraded hydrocarbon residues (reflected in the absence of prominent n-alkane peaks coupled with the presence of 17α(H),21β(H)-25-norhopane, an indicator of heavy hydrocarbon biodegradation) of Nigerian crude oils (confirmed by the occurrence of 18α(H)-oleanane, a compound characteristic of oils of deltaic origin). The concentrations of polycyclic aromatic hydrocarbons (PAHs) ranging from 48 to 117 ng/g dry weight (dw; ∑13PAHs) indicate a moderate pollution, possibly lowered by the sandy lithology and low organic carbon (OC) content of the sediments. Concentrations slightly decrease towards the estuary of the river, probably due to the fact that these stations are affected by tidal flushing of pollutants adsorbed on sediment particles and carried away by occasional storm to the Atlantic Ocean. A number of PAH ratios, including parent/alkylated and isomeric compounds, indicates a predominance of petrogenic sources, with a low contribution of pyrolytic inputs, particularly of fossil fuel combustion. On the basis of OC/ON (>10) and Per/ΣPAHpenta- (>10) values, a diagenetic terrigenous OC was proposed as a source of perylene to the river.

Organic markers as source discriminants and sediment transport indicators in south San Francisco Bay, California

USGS Publications Warehouse

Hostettler, F.D.; Rapp, J.B.; Kvenvolden, K.A.; Samuel, N L.

1989-01-01

Sediment samples from nearshore sites in south San Francisco Bay and from streams flowing into that section of the Bay have been characterized in terms of their content of biogenic and anthropogenic molecular marker compounds. The distributions, input sources, and applicability of these compounds in determining sediment movement are discussed. By means of inspection and multivariate analysis, the compounds were grouped according to probable input sources and the sampling stations according to the relative importance of source contributions. A suite of polycyclic aromatic hydrocarbons (PAHs) dominated by pyrene, fluoranthene and phenanthrene, typical of estuarine environments worldwide, and suites of mature sterane and hopane biomarkers were found to be most suitable as background markers for the Bay. A homologous series of long-chain n-aldehydes (C12-C32) with a strong even-over-odd carbon number dominance in the higher molecular weight range and the ubiquitous n-alkanes (n-C24-C34) with a strong odd-over-even carbon number dominance were utilized as terrigenous markers. Several ratios of these terrigenous and Bay markers were calculated for each station. These ratios and the statistical indicators from the multivariate analysis point toward a strong terrigenous signal in the terminus of South Bay and indicate net directional movement of recently introduced sediment where nontidal currents had been considered to be minimal or nonexistent and tidal currents had been assumed to be dominant. ?? 1989.

A Manual to Identify Sources of Fluvial Sediment

EPA Science Inventory

Sedimentation is one of the main causes of stream/river aquatic life use impairments in R3. Currently states lack standard guidance on appropriate tools available to quantify sediment sources and develop sediment budgets in TMDL Development. Methods for distinguishing sediment t...

230Th in the Eastern Equatorial Pacific Panama Basin

NASA Astrophysics Data System (ADS)

Singh, A. K.; Marcantonio, F.; Lyle, M.

2008-12-01

In the Panama Basin, higher glacial sediment mass accumulation rates (MARs), determined using oxygen isotope stratigraphy, have been suggested to be due to high surface water primary productivity [1]. More recently, however, the 230Th normalization method suggests that higher glacial sediment fluxes are due to sediment focusing by deep-ocean currents (e.g., [2]). Moreover, the 230Th inventory suggests that lateral advection of marine sediment in the Panama Basin is 2-4 times greater than the vertical flux, provided that the sediment is unfractionated by lateral transport. Differentiating between these two models of MARs is crucial to our understanding of the response of sedimentation to changes in climate, and how sediments record paleoceanographic information. Assuming that the 230Th model is correct, downslope transport of sediment from the top of the Carnegie ridge (an aseismic ridge that forms the southern boundary of the Panama Basin) may be the source of extra 230Th [2]. Previous geophysical studies also suggest that sediment focusing is a common phenomenon in the Panama Basin [3]. Here, we test the sediment redistribution hypothesis by measuring 230Th in cores located near the tops of the Carnegie ridge and other ridges that bound the Panama Basin (e.g., Cocos). If ridge tops are the source of sediment to the basin, then we expect the 230Th systematics to indicate focusing factors that are less than 1 there. An analysis of the mass balance of 230Th within the Panama Basin will be presented. [1] Lyle et al. 2002, Paleoceanography 17(2), 1013. [2] Kienast et al. 2007, Paleoceanography 22, 2213[3] Lonsdale and Malfait, 1974, Geol. Soc. Am. Bull., 85, 1697-1712

Organochlorine pesticide residues in bed sediments of the San Joaquin River, California

USGS Publications Warehouse

Gilliom, Robert J.; Clifton, Daphne G.

1990-01-01

Bed sediments of the San Joaquin River and its tributaries were sampled during October 7–11, 1985, and analyzed for organochiorine pesticide residues in order to determine their areal distribution and to evaluate and prioritize needs for further study. Residues of DDD, DDE, DDT, and dieldrin are widespread in the fine-grained bed sediments of the San Joaquin River and its tributaries despite little or no use of these pesticides for more than 15 years. The San Joaquin River has among the highest bed-sediment concentrations of DDD, DDE, DDT, and dieldrin residues of major rivers in the United States. Concentrations of all four pesticides were correlated with each other and with the amount of organic carbon and fine-grained particles in the bed sediments. The highest concentrations occurred in bed sediments of westside tributary streams. Potential tributary loads of DDD, DDE, DDT, and dieldrin to the San Joaquin River were computed from bed-sediment concentrations and data on streamfiow and suspended-sediment concentration in order to identify the general magnitude of differences between streams and to determine study priorities. The estimated loads indicate that the most important sources of residues during the study period were Salt Slough because of a high load of fine sediment, and Newman Wasteway, Orestimba Creek, and Hospital Creek because of high bed-sediment concentrations. Generally, the highest estimated loads of DDD, DDE, DDT, and dieldrin were in Orestimba and Hospital Creeks.

Preliminary use of compound-specific stable isotope (CSSI) technique to identify and apportion sediment origin in a small Austrian catchment

NASA Astrophysics Data System (ADS)

Mabit, Lionel; Gibbs, Max; Chen, Xu; Meusburger, Katrin; Toloza, Arsenio; Resch, Christian; Klik, Andreas; Eder, Alexander; Strauss, Peter; Alewell, Christine

2015-04-01

The overall impacts of climate change on agriculture are expected to be negative, threatening global food security. In the agricultural areas of the European Union, water erosion risk is expected to increase by about 80% by the year 2050. Reducing soil erosion and sedimentation-related environmental problems represent a key requirement for mitigating the impact of climate change. A new forensic stable isotope technique, using the compound specific stable isotope (CSSI) signatures of inherent soil organic biomarkers, can discriminate and apportion the source soil contribution from different land uses. Plant communities label the soil where they grow by exuding organic biomarkers. Although all plants produce the same biomarkers, the stable isotopic signature of those biomarkers is different for each plant species. For agri-environmental investigation, the CSSI technique is based on the measurement of carbon-13 (13-C) natural abundance signatures of specific organic compounds such as natural fatty acids (FAs) in the soil. By linking fingerprints of land use to the sediment in deposition zones, this approach has been shown to be a useful technique for determining the source of eroded soil and thereby identifying areas prone to soil degradation. The authors have tested this innovative stable isotopic approach in a small Austrian agricultural catchment located 60 km north of Vienna. A previous fallout radionuclide (i.e. 137-Cs) based investigation established a sedimentation rate of 4 mm/yr in the lowest part of the study site. To gain knowledge about the origin of these sediments, the CSSI technique was then tested using representative samples from the different land-uses of the catchment as source material. Values of 13-C signatures of specific FAs (i.e. C22:0 = Behenic Acid ; C24:0 = Lignoceric Acid) and the bulk 13-C of the sediment mixture and potential landscape sources were analyzed with the mixing models IsoSource and CSSIAR v1.00. Using both mixing models, preliminary results highlighted that about 50-55% of the sediment located in the deposition area originated from the main grassed waterway of the catchment.

Can Concentration - Discharge Relationships Diagnose Material Source During Extreme Events?

NASA Astrophysics Data System (ADS)

Karwan, D. L.; Godsey, S.; Rose, L.

2017-12-01

Floods can carry >90% of the basin material exported in a given year as well as alter flow pathways and material sources. In turn, sediment and solute fluxes can increase flood damages and negatively impact water quality and integrate physical and chemical weathering of landscapes and channels. Concentration-discharge (C-Q) relationships are used to both describe export patterns as well as compute them. Metrics for describing C-Q patterns and inferring their controls are vulnerable to infrequent sampling that affects how C-Q relationships are interpolated and interpreted. C-Q relationships are typically evaluated from multiple samples, but because hydrological extremes are rare, data are often unavailable for extreme events. Because solute and sediment C-Q relationships likely respond to changes in hydrologic extremes in different ways, there is a pressing need to define their behavior under extreme conditions, including how to properly sample to capture these patterns. In the absence of such knowledge, improving load estimates in extreme floods will likely remain difficult. Here we explore the use of C-Q relationships to determine when an event alters a watershed system such that it enters a new material source/transport regime. We focus on watersheds with sediment and discharge time series include low-frequency and/or extreme events. For example, we compare solute and sediment patterns in White Clay Creek in southeastern Pennsylvania across a range of flows inclusive of multiple hurricanes for which we have ample ancillary hydrochemical data. TSS is consistently mobilized during high flow events, even during extreme floods associated with hurricanes, and sediment fingerprinting indicates different sediment sources, including in-channel remobilization and landscape erosion, are active at different times. In other words, TSS mobilization in C-Q space is not sensitive to the source of material being mobilized. Unlike sediments, weathering solutes in this watershed tend to exhibit a relatively chemostatic C-Q pattern, except during the runoff-dominated Hurricane Irene, when they exhibit a diluting C-Q pattern. Finally, we summarize the vulnerability of these observations to shifts in sampling effort to highlight the utility and limitations of C-Q-derived export patterns.

Interpreting stream sediment fingerprints against primary and secondary source signatures in agricultural catchments

NASA Astrophysics Data System (ADS)

Blake, Will H.; Haley, Steve; Smith, Hugh G.; Taylor, Alex; Goddard, Rupert; Lewin, Sean; Fraser, David

2013-04-01

Many sediment fingerprinting studies adopt a black box approach to source apportionment whereby the properties of downstream sediment are compared quantitatively to the geochemical fingerprints of potential catchment sources without consideration of potential signature development or modification during transit. Working within a source-pathway-receptor framework, this study aimed to undertake sediment source apportionment within 6 subcatchments of an agricultural river basin with specific attention to the potential role of contaminants (vehicle emissions and mine waste) in development of stream sediment signatures. Fallout radionuclide (FRN) and geochemical fingerprinting methods were adopted independently to establish source signatures for primary sediment sources of surface and subsurface soil materials under various land uses plus reworked mine and 'secondary' soil material deposited, in transit, along road networks. FRN data demonstrated expected variability between surface soil (137Cs = 14 ± 3 Bq kg-1; 210Pbxs = 40 ± 7 Bq kg-1) and channel bank materials (137Cs = 3 ± 1 Bq kg-1; 210Pbxs = 24 ± 5 Bq kg-1) but road transported soil material was considerably elevated in 210Pbxs (up to 673 ± 51 Bq kg-1) due to sediment interaction with pluvial surface water within the road network. Geochemical discrimination between surface and subsurface soil materials was dominated by alkaline earth and alkali metals e.g. Ba, Rb, Ca, K, Mg which are sensitive to weathering processes in soil. Magnetic susceptibility and heavy metals were important discriminators of road transported material which demonstrated transformation of the signatures of material transported via the road network. Numerical unmixing of stream sediment indicated that alongside channel bank erosion, road transported material was an important component in some systems in accord with FRN evidence. While mining spoil also ranked as a significant source in an affected catchment, perhaps related to legacy sediment, the potential role of dissolved metal leaching and subsequent sediment-water interaction within the channel on signature modification remained unclear. Consideration of sediment signature modification en route from primary source to stream elucidated important information regarding sediment transfer pathways and dynamics relevant to sediment management decisions. Further work on sediment-water interactions and potential for signature transformation in the channel environment is required.

Multivariate analysis for source identification of pollution in sediment of Linggi River, Malaysia.

PubMed

Elias, Md Suhaimi; Ibrahim, Shariff; Samuding, Kamarudin; Rahman, Shamsiah Ab; Wo, Yii Mei; Daung, Jeremy Andy Dominic

2018-03-29

Rapid socioeconomic development in the Linggi River Basin has contributed to the significant increase of pollution discharge into the Linggi River and its adjacent coastal areas. The toxic element contents and distributions in the sediment samples collected along the Linggi River were determined using neutron activation analysis (NAA) and inductively coupled plasma-mass spectrometry (ICP-MS) techniques. The measured mean concentration of As, Cd, Pb, Sb, U, Th and Zn is relatively higher compared to the continental crust value of the respective element. Most of the elements (As, Cr, Fe, Pb, Sb and Zn) exceeded the freshwater sediment quality guideline-threshold effect concentration (FSQG-TEC) value. Downstream stations of the Linggi River showed that As concentrations in sediment exceeded the freshwater sediment quality guideline-probable effect concentration (FSQG-PEC) value. This indicates that the concentration of As will give an adverse effect to the growth of sediment-dwelling organisms. Generally, the Linggi River sediment can be categorised as unpolluted to strongly polluted and unpolluted to strongly to extremely polluted. The correlation matrix of metal-metal relationship, principle component analysis (PCA) and cluster analysis (CA) indicates that the pollution sources of Cu, Ni, Zn, Cd and Pb in sediments of the Linggi River originated from the industry of electronics and electroplating. Elements of As, Cr, Sb and Fe mainly originated from motor-vehicle workshops and metal work, whilst U and Th originated from natural processes such as terrestrial runoff and land erosion.

Bottom sediment as a source of organic contaminants in Lake Mead, Nevada, USA

USGS Publications Warehouse

Alvarez, David A.; Rosen, Michael R.; Perkins, Stephanie D.; Cranor, Walter L.; Schroeder, Vickie L.; Jones-Lepp, Tammy L.

2012-01-01

Treated wastewater effluent from Las Vegas, Nevada and surrounding communities' flow through Las Vegas Wash (LVW) into the Lake Mead National Recreational Area at Las Vegas Bay (LVB). Lake sediment is a likely sink for many hydrophobic synthetic organic compounds (SOCs); however, partitioning between the sediment and the overlying water could result in the sediment acting as a secondary contaminant source. Locating the chemical plumes may be important to understanding possible chemical stressors to aquatic organisms. Passive sampling devices (SPMDs and POCIS) were suspended in LVB at depths of 3.0, 4.7, and 6.7 (lake bottom) meters in June of 2008 to determine the vertical distribution of SOCs in the water column. A custom sediment probe was used to also bury the samplers in the sediment at depths of 0–10, 10–20, and 20–30 cm. The greatest number of detections in samplers buried in the sediment was at the 0–10 cm depth. Concentrations of many hydrophobic SOCs were twice as high at the sediment–water interface than in the mid and upper water column. Many SOCs related to wastewater effluents, including fragrances, insect repellants, sun block agents, and phosphate flame retardants, were found at highest concentrations in the middle and upper water column. There was evidence to suggest that the water infiltrated into the sediment had a different chemical composition than the rest of the water column and could be a potential risk exposure to bottom-dwelling aquatic organisms.

Suspended-sediment and turbidity responses to sediment and turbidity reduction projects in the Beaver Kill, Stony Clove Creek, and Warner Creek, Watersheds, New York, 2010–14

USGS Publications Warehouse

Siemion, Jason; McHale, Michael R.; Davis, Wae Danyelle

2016-12-05

Suspended-sediment concentrations (SSCs) and turbidity were monitored within the Beaver Kill, Stony Clove Creek, and Warner Creek tributaries to the upper Esopus Creek in New York, the main source of water to the Ashokan Reservoir, from October 1, 2010, through September 30, 2014. The purpose of the monitoring was to determine the effects of suspended-sediment and turbidity reduction projects (STRPs) on SSC and turbidity in two of the three streams; no STRPs were constructed in the Beaver Kill watershed. During the study period, four STRPs were completed in the Stony Clove Creek and Warner Creek watersheds. Daily mean SSCs decreased significantly for a given streamflow after the STRPs were completed. The most substantial decreases in daily mean SSCs were measured at the highest streamflows. Background SSCs, as measured in water samples collected in upstream reference stream reaches, in all three streams in this study were less than 5 milligrams per liter during low and high streamflows. Longitudinal stream sampling identified stream reaches with failing hillslopes in contact with the stream channel as the primary sediment sources in the Beaver Kill and Stony Clove Creek watersheds.

Sewage contamination in the upper Mississippi River as measured by the fecal sterol, coprostanol

USGS Publications Warehouse

Writer, J.H.; Leenheer, J.A.; Barber, L.B.; Amy, G.L.; Chapra, S.C.

1995-01-01

The molecular sewage indicator, coprostanol, was measured in bed sediments of the Mississippi River for the purpose of determining sewage contamination. Coprostanol is a non-ionic, non-polar, organic molecule that associates with sediments in surface waters, and concentrations of coprostanol in bed sediments provide an indication of long-term sewage loads. Because coprostanol concentrations are dependent on particle size and percent organic carbon, a ratio between coprostanol (sewage sources) and cholestanol + cholesterol (sewage and non-sewage sources) was used to remove the biases related to particle size and percent organic carbon. The dynamics of contaminant transport in the Upper Mississippi River are influenced by both hydrologic and geochemical parameters. A mass balance model incorporating environmental parameters such as river and tributary discharge, suspended sediment concentration, fraction of organic carbon, sedimentation rates, municipal discharges and coprostanol decay rates was developed that describes coprostanol concentrations and therefore, expected patterns of municipal sewage effects on the Upper Mississippi River. Comparison of the computed and the measured coprostanol concentrations provides insight into the complex hydrologic and geochemical processes of contaminant transport and the ability to link measured chemical concentrations with hydrologic characteristics of the Mississippi River.

Rapid residue analysis of oxathiapiprolin and its metabolites in typical Chinese soil, water, and sediments by a modified quick, easy, cheap, effective, rugged, and safe method with ultra high performance liquid chromatography and tandem mass spectrometry.

PubMed

Ju, Chao; Dong, Fengshou; Liu, Xingang; Wu, Xiaohu; Zhao, Huanhuan; Zheng, Yongquan; Xu, Jun

2015-03-01

A sensitive and effective method for the simultaneous determination of residues from a new fungicide, oxathiapiprolin, and its metabolites (IN-E8S72 and IN-WR791) in soil, water, and sediment, was developed using ultra high performance liquid chromatography with tandem mass spectrometry. Three compounds were extracted from water, soil, and sediment by using acetonitrile and different proportions of formic acid aqueous solution (1% v/v for water; 2% v/v for soil; and sediment), and were cleaned with octadecylsilane. The target compounds were determined within 5 min using an electrospray ionization source in the positive mode for oxathiapiprolin and in the negative mode for the two metabolites. The limits of quantification for all the three compounds were 0.1 μg/kg in water and 1 μg/kg in soil and sediment. Recovery studies were performed using three spiked levels (0.1, 1, and 10 μg/kg for water; 1, 10, and 50 μg/kg for soil and sediment). The overall average recoveries ranged from 64.8 to 112.7% with all intra- and interday relative standard deviation values below 19.4 and 19.1%, respectively. The method validation confirmed that the proposed method was convenient and reliable for determining residual oxathiapiprolin and its metabolites in soil, water, and sediments. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Inverse modelling of fluvial sediment connectivity identifies characteristics and spatial distribution of sediment sources in a large river network.

NASA Astrophysics Data System (ADS)

Schmitt, R. J. P.; Bizzi, S.; Kondolf, G. M.; Rubin, Z.; Castelletti, A.

2016-12-01

Field and laboratory evidence indicates that the spatial distribution of transport in both alluvial and bedrock rivers is an adaptation to sediment supply. Sediment supply, in turn, depends on spatial distribution and properties (e.g., grain sizes and supply rates) of individual sediment sources. Analyzing the distribution of transport capacity in a river network could hence clarify the spatial distribution and properties of sediment sources. Yet, challenges include a) identifying magnitude and spatial distribution of transport capacity for each of multiple grain sizes being simultaneously transported, and b) estimating source grain sizes and supply rates, both at network scales. Herein, we approach the problem of identifying the spatial distribution of sediment sources and the resulting network sediment fluxes in a major, poorly monitored tributary (80,000 km2) of the Mekong. Therefore, we apply the CASCADE modeling framework (Schmitt et al. (2016)). CASCADE calculates transport capacities and sediment fluxes for multiple grainsizes on the network scale based on remotely-sensed morphology and modelled hydrology. CASCADE is run in an inverse Monte Carlo approach for 7500 random initializations of source grain sizes. In all runs, supply of each source is inferred from the minimum downstream transport capacity for the source grain size. Results for each realization are compared to sparse available sedimentary records. Only 1 % of initializations reproduced the sedimentary record. Results for these realizations revealed a spatial pattern in source supply rates, grain sizes, and network sediment fluxes that correlated well with map-derived patterns in lithology and river-morphology. Hence, we propose that observable river hydro-morphology contains information on upstream source properties that can be back-calculated using an inverse modeling approach. Such an approach could be coupled to more detailed models of hillslope processes in future to derive integrated models of hillslope production and fluvial transport processes, which is particularly useful to identify sediment provenance in poorly monitored river basins.

Pollutant Source Tracking (PST) Technical Guidance

DTIC Science & Technology

2011-12-01

in the context of heavy metals (lead, copper), is considered to be a minor process contribution to the source fingerprint. 3.7 RAPID SCREENING...limits (summarized in Table 2) support the use of ICP-AES (ICP-OES) for heavy metal determination in soils , sediments, wastewater and other matrices...are included here. Isotopic ratios of stable isotopes of the metal of interest can be used for source identification and apportionment in complex

Distributions, Early Diagenesis, and Spatial Characteristics of Amino Acids in Sediments of Multi-Polluted Rivers: A Case Study in the Haihe River Basin, China.

PubMed

Zhao, Yu; Shan, Baoqing; Tang, Wenzhong; Zhang, Hong; Rong, Nan; Ding, Yuekui

2016-02-19

The Haihe River Basin, which is one of the most water-scarce and polluted river basins in China, has abnormally high nitrogen levels. In this study, total hydrolyzable amino acids (THAAs) were measured in surface sediment and sediment core samples in the Haihe River Basin to determine if amino acids were potential sources of ammonium, organic nitrogen, and organic carbon. The rivers were found to be in a state of hypoxia and contain abnormally high levels of ammonium and organic nitrogen. Additionally, NH₃-N was the predominant form of inorganic nitrogen in the surface sediments, while organic nitrogen accounted for 92.53% of sedimentary nitrogen. THAAs-C accounted for 14.92% of the total organic carbon, while THAAs-N accounted for more than 49.59% of organic nitrogen and 45.68% of total nitrogen. The major fraction of THAAs were protein amino acids. Three sediment cores of the most heavily polluted rivers also showed high levels of THAAs. Evaluation of the degradation index (DI) of sedimentary organic matter in sediments evaluated based on the THAAs revealed that most positive DI values were found in the downstream portion of the Ziya River Watershed. Additionally, the DI of surface sediment was correlated with THAAs (r² = 0.763, p < 0.001), as was the DI of sediment cores (r² = 0.773, p < 0.001). Overall, amino acids in sediments were found to be an important potential source of ammonium, organic nitrogen, and organic carbon.

Distributions, Early Diagenesis, and Spatial Characteristics of Amino Acids in Sediments of Multi-Polluted Rivers: A Case Study in the Haihe River Basin, China

PubMed Central

Zhao, Yu; Shan, Baoqing; Tang, Wenzhong; Zhang, Hong; Rong, Nan; Ding, Yuekui

2016-01-01

The Haihe River Basin, which is one of the most water-scarce and polluted river basins in China, has abnormally high nitrogen levels. In this study, total hydrolyzable amino acids (THAAs) were measured in surface sediment and sediment core samples in the Haihe River Basin to determine if amino acids were potential sources of ammonium, organic nitrogen, and organic carbon. The rivers were found to be in a state of hypoxia and contain abnormally high levels of ammonium and organic nitrogen. Additionally, NH3-N was the predominant form of inorganic nitrogen in the surface sediments, while organic nitrogen accounted for 92.53% of sedimentary nitrogen. THAAs-C accounted for 14.92% of the total organic carbon, while THAAs-N accounted for more than 49.59% of organic nitrogen and 45.68% of total nitrogen. The major fraction of THAAs were protein amino acids. Three sediment cores of the most heavily polluted rivers also showed high levels of THAAs. Evaluation of the degradation index (DI) of sedimentary organic matter in sediments evaluated based on the THAAs revealed that most positive DI values were found in the downstream portion of the Ziya River Watershed. Additionally, the DI of surface sediment was correlated with THAAs (r2 = 0.763, p < 0.001), as was the DI of sediment cores (r2 = 0.773, p < 0.001). Overall, amino acids in sediments were found to be an important potential source of ammonium, organic nitrogen, and organic carbon. PMID:26907310

Sediment source fingerprinting as an aid to catchment management: A review of the current state of knowledge and a methodological decision-tree for end-users.

PubMed

Collins, A L; Pulley, S; Foster, I D L; Gellis, A; Porto, P; Horowitz, A J

2017-06-01

The growing awareness of the environmental significance of fine-grained sediment fluxes through catchment systems continues to underscore the need for reliable information on the principal sources of this material. Source estimates are difficult to obtain using traditional monitoring techniques, but sediment source fingerprinting or tracing procedures, have emerged as a potentially valuable alternative. Despite the rapidly increasing numbers of studies reporting the use of sediment source fingerprinting, several key challenges and uncertainties continue to hamper consensus among the international scientific community on key components of the existing methodological procedures. Accordingly, this contribution reviews and presents recent developments for several key aspects of fingerprinting, namely: sediment source classification, catchment source and target sediment sampling, tracer selection, grain size issues, tracer conservatism, source apportionment modelling, and assessment of source predictions using artificial mixtures. Finally, a decision-tree representing the current state of knowledge is presented, to guide end-users in applying the fingerprinting approach. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Can ipids in lake sediments help to reconstruct changes in methane availability and methane fluxes in boreal and temperate lakes?

NASA Astrophysics Data System (ADS)

Stoetter, T.; van Hardenbroek, M.; Rinta, P.; Schilder, J.; Schubert, C. J.; Heiri, O.

2013-12-01

Methane (CH4) is a major greenhouse gas and lakes are an important but poorly studied source of CH4 to the atmosphere. Lipid analysis was used before to identify and quantify CH4 oxidizing bacteria (MOB), giving insight into CH4 oxidation and production in lakes. However, few studies are available that examine how closely the distribution and the carbon isotopic signature (δ13C) of lipids are related to CH4 concentrations and fluxes in different lake ecosystems. In a multi-lake survey we quantified the relationship between lipids, mainly fatty acids (FAs), and CH4 concentrations or fluxes, with the aim of assessing whether FA analysis of lake sediment samples can provide information on past CH4 abundance and production in lakes. The study sites include small lakes in Sweden, Finland, the Netherlands, and Switzerland. Surface sediments collected in the deepest point of the lakes were examined using gas chromatography with flame ionization for determining FA concentrations, gas chromatography mass spectrometry (GC-MS) for identification of individual FAs, and isotope ratio mass spectrometry (IRMS) for determining compound specific δ13C values. Since CH4 is significantly more depleted in 13C than other carbon sources, δ13C is a good tracer for CH4 related processes. The analysis of the acid fraction in the sediments showed that mainly three FAs, identified as C16:1ω7, C16:1ω5 and C18:1ω7, were more depleted in 13C than the others, suggesting that they may originate from MOB. Comparison with literature sources indicated that these FAs are produced by MOB, however, not exclusively. The relative abundance of these depleted FAs showed clear relations to CH4 parameters. For example, increasing abundances were observed with increasing CH4 concentrations in the sediment or with increasing CH4 flux measured at the lake surface. An explanation for these relations would be an increase in MOB biomass with increasing CH4 availability, as they use CH4 as energy and carbon source, which would lead to increasing abundances of MOB produced FAs in the sediment. The presence or absence of oxygen above the sediments seems to have a strong effect on these relationships. In lakes with oxic bottom water, the abundance of depleted FAs shows a stronger rise with increasing CH4 concentrations than in lakes with anoxic bottom waters, suggesting that aerobic CH4 oxidizers are an important source of these depleted FAs. With increasing CH4 concentrations, for example just above the sediment, we find more depleted values in C16:1ω7 and C18:1ω7. This correlation is only strong if we exclude lakes with a strong terrestrial influence. Our preliminary analysis of FAs in surface sediment samples showed clear relations to CH4 parameters measured in the examined lake ecosystems suggesting that it may be possible to use FA analysis of lake sediment records as a proxy for CH4 availability in lakes. However, our results also show that oxygen conditions at the sediment-water interface and organic matter imported from the lake catchment can have a strong effect.

Fine-grained suspended sediment source identification for the Kharaa River basin, northern Mongolia

NASA Astrophysics Data System (ADS)

Rode, Michael; Theuring, Philipp; Collins, Adrian L.

2015-04-01

Fine sediment inputs into river systems can be a major source of nutrients and heavy metals and have a strong impact on the water quality and ecosystem functions of rivers and lakes, including those in semiarid regions. However, little is known to date about the spatial distribution of sediment sources in most large scale river basins in Central Asia. Accordingly, a sediment source fingerprinting technique was used to assess the spatial sources of fine-grained (<10 microns) sediment in the 15 000 km2 Kharaa River basin in northern Mongolia. Five field sampling campaigns in late summer 2009, and spring and late summer in both 2010 and 2011, were conducted directly after high water flows, to collect an overall total of 900 sediment samples. The work used a statistical approach for sediment source discrimination with geochemical composite fingerprints based on a new Genetic Algorithm (GA)-driven Discriminant Function Analysis, the Kruskal-Wallis H-test and Principal Component Analysis. The composite fingerprints were subsequently used for numerical mass balance modelling with uncertainty analysis. The contributions of the individual sub-catchment spatial sediment sources varied from 6.4% (the headwater sub-catchment of Sugnugur Gol) to 36.2% (the Kharaa II sub-catchment in the middle reaches of the study basin) with the pattern generally showing higher contributions from the sub-catchments in the middle, rather than the upstream, portions of the study area. The importance of riverbank erosion was shown to increase from upstream to midstream tributaries. The source tracing procedure provides results in reasonable accordance with previous findings in the study region and demonstrates the general applicability and associated uncertainties of an approach for fine-grained sediment source investigation in large scale semi-arid catchments. The combined application of source fingerprinting and catchment modelling approaches can be used to assess whether tracing estimates are credible and in combination such approaches provide a basis for making sediment source apportionment more compelling to catchment stakeholders and managers.

Geochemistry of polycyclic aromatic hydrocarbons in the bottom sediments of the eastern Arctic shelf

NASA Astrophysics Data System (ADS)

Petrova, V. I.; Batova, G. I.; Kursheva, A. V.; Litvinenko, I. V.; Savinov, V. M.; Savinova, T. N.

2008-04-01

Sources and pathways of supply of polycyclic aromatic hydrocarbons (PAH) in the surface sediments of the Laptev and East Siberian seas were identified based on an analysis of the lithological-geochemical characteristics and distribution of organic matter (OM). The distribution of organic carbon, humic acids, bitumoids, and hydrocarbons demonstrates the determining role of the riverine runoff in the formation of the recent sediments. The total average content of PAH in the sediments of this region approximates 37 ng/g, not exceeding 80 ng/g of dry sediment. The biogenic components of the PAH (alkylphenanthrenes, alkylchrysenes, perylene) dominate in the estuarine-shelf and coastal-shelf sediments enriched with plant detritus and significantly decrease in the pelagic zone. The anthropogenic influence is observed in sediments of the port of Tiksi, where the total content of PAH with dominant pyrogenic components is two orders of magnitude higher as compared with the background values in the study region.

Quantifying suspended sediment dynamics in mega deltas using remote sensing data: A case study of the Mekong floodplains

NASA Astrophysics Data System (ADS)

Dang, Thanh Duc; Cochrane, Thomas A.; Arias, Mauricio E.

2018-06-01

Temporal and spatial concentrations of suspended sediment in floodplains are difficult to quantify because in situ measurements can be logistically complex, time consuming and costly. In this research, satellite imagery with long temporal and large spatial coverage (Landsat TM/ETM+) was used to complement in situ suspended sediment measurements to reflect sediment dynamics in a large (70,000 km2) floodplain. Instead of using a single spectral band from Landsat, a Principal Component Analysis was applied to obtain uncorrelated reflectance values for five bands of Landsat TM/ETM+. Significant correlations between the scores of the 1st principal component and the values of continuously gauged suspended sediment concentration, shown via high coefficients of determination of sediment rating curves (R2 ranging from 0.66 to 0.92), permit the application of satellite images to quantify spatial and temporal sediment variation in the Mekong floodplains. Estimated suspended sediment maps show that hydraulic regimes at Chaktomuk (Cambodia), where the Mekong, Bassac, and Tonle Sap rivers diverge, determine the amount of seasonal sediment supplies to the Mekong Delta. The development of flood prevention systems to allow for three rice crops a year in the Vietnam Mekong Delta significantly reduces localized flooding, but also prevents sediment (source of nutrients) from entering fields. A direct consequence of this is the need to apply more artificial fertilizers to boost agricultural productivity, which may trigger environmental problems. Overall, remote sensing is shown to be an effective tool to understand temporal and spatial sediment dynamics in large floodplains.

Geochemistry of loess-paleosol sediments of Kashmir Valley, India: Provenance and weathering

NASA Astrophysics Data System (ADS)

Ahmad, Ishtiaq; Chandra, Rakesh

2013-04-01

Middle to Late Pleistocene loess-paleosol sediments of Kashmir Valley, India, were analyzed for major, trace and REE elements in order to determine their chemical composition, provenance and intensity of palaeo-weathering of the source rocks. These sediments are generally enriched with Fe2O3, MgO, MnO, TiO2, Y, Ni, Cu, Zn, Th, U, Sc, V and Co while contents of SiO2, K2O, Na2O, P2O5, Sr, Nb and Hf are lower than the UCC. Chondrite normalized REE patterns are characterized by moderate enrichment of LREEs, relatively flat HREE pattern (GdCN/YbCN = 1.93-2.31) and lack of prominent negative Eu anomaly (Eu/Eu* = 0.73-1.01, average = 0.81). PAAS normalized REE are characterized by slightly higher LREE, depleted HREE and positive Eu anomaly. Various provenance discrimination diagrams reveal that the Kashmir Loess-Paleosol sediments are derived from the mixed source rocks suggesting large provenance with variable geological settings, which apparently have undergone weak to moderate recycling processes. Weathering indices such as CIA, CIW and PIA values (71.87, 83.83 and 80.57 respectively) and A-CN-K diagram imply weak to moderate weathering of the source material.

IDENTIFICATION OF SEDIMENT SOURCE AREAS WITHIN A WATERSHED

EPA Science Inventory

Identification of sediment source areas is crucial for designing proper abatement strategies that reduce sediment and associated contaminant loading to receiving water downstream. In this study, two methodologies were developed to identify the source areas and their relative stre...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, S.E. Jr.; Chung, K.T.

Anaerobic bacteria were isolated from deep subsurface sediment samples taken at study sites in Idaho (INEL) and Washington (HR) by culturing on dilute and concentrated medium. Morphologically distinct colonies were purified, and their responses to 21 selected physiological tests were determined. Although the number of isolates was small (18 INEL, 27 HR) some general patterns could be determined. Most strains could utilize all the carbon sources, however the glycerol and melizitose utilization was positive for 50% or less of the HR isolates. Catalase activity (27.78% at INEL, 74.07% at HR) and tryptophan metabolism (11.12% at INEL, 40.74% at HR) weremore » significantly different between the two study sites. MPN and viable counts indicate that sediments near the water table yield the greatest numbers of anaerobes. Deeper sediments also appear to be more selective with the greatest number of viable counts on low-nutrient mediums. Likewise, only strictly obligate anaerobes were found in the deepest sediment samples. Selective media indicated the presence of methanogens, acetogens, and sulfate reducers at only the HR site.« less

Sediment pollution of the Elbe River side structures - current research

NASA Astrophysics Data System (ADS)

Chalupova, Dagmar; Janský, Bohumír

2016-04-01

The contribution brings the summarized results of a long-term research on sediment pollution of side structures of the Elbe River over the last 14 years. The investigation has been focused on old anthropogenic pollution of sediment cores taken from fluvial lakes and floodplain, as the sampling of deeper sediments outside the riverbed is not a part of systematic monitoring of sediment pollution of the Elbe. The Elbe River floodplain has been influenced by human activities since the Middle Ages, but the main anthropogenic pollution have been produced in the 20th century. The studied localities were chosen with the respect to the distance from the source of industrial pollution, the intensity of hydrological communication with the river and the surrounding landuse to determine the extend and the level of anthropogenic contamination in the Elbe River floodplain ecosystem. Apart from bathymetric measurements, observation of the hydrological regime in several fluvial lakes or water quality sampling at some localities, the research was focused above all on determination of metal concentrations (Ag, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Zn) in all taken sediment cores, specific organic compounds (PCBs, DDT, HCH, HCB, PAHs etc.), total organic carbon at some localities and grain structure analyses. The data were also compared with the results of systematic sediment monitoring from the nearest riverbed sampling stations on the Elbe River. The highest concentrations of metals and specific organic compounds were determined in the sediments taken from fluvial lakes and floodplain (Zimní přístav PARAMO, Rosice fuvial Lake, Libiš pool etc.) situated in the vicinity of the main Elbe River polluters - Synthesia chemical plant and PARAMO refinery in Pardubice or Spolana chemical plant near Neratovice. However, there was also determined a significant role of the hydrological communication with the river proved with lower sediment pollution in separated localities. The realization of the above mentioned research was possible thanks to the support of numerous Czech and German projects (GAUK, GAČR, SVV, VaV, PRVOUK, ELSA etc.).

Clay Mineralogy of AN Alluvial Aquifer in a Mountainous, Semiarid Terrain, AN Example from Rifle, Colorado

NASA Astrophysics Data System (ADS)

Elliott, W. C.; Lim, D.; Zaunbrecher, L. K.; Pickering, R. A.; Williams, K. H.; Navarre-Sitchler, A.; Long, P. E.; Noel, V.; Bargar, J.; Qafoku, N. P.

2015-12-01

Alluvial sediments deposited along the Colorado River corridor in the semi-arid regions of central to western Colorado can be important hosts for legacy contamination including U, V, As and Se. These alluvial sediments host aquifers which are thought to provide important "hot spots" and "hot moments" for microbiological activity controlling organic carbon processing and fluxes in the subsurface. Relatively little is known about the clay mineralogy of these alluvial aquifers and the parent alluvial sediments in spite of the fact that they commonly include lenses of silt-clay materials. These lenses are typically more reduced than coarser grained materials, but zones of reduced and more oxidized materials are present in these alluvial aquifer sediments. The clay mineralogy of the non-reduced parent alluvial sediments of the alluvial aquifer located in Rifle, CO (USA) is composed of chlorite, smectite, illite, kaolinite and quartz. The clay mineralogy of non-reduced fine-grained materials at Rifle are composed of the same suite of minerals found in the sediments plus a vermiculite-smectite intergrade that occurs near the bottom of the aquifer near the top of the Wasatch Formation. The clay mineral assemblages of the system reflect the mineralogically immature character of the source sediments. These assemblages are consistent with sediments and soils that formed in a moderately low rainfall climate and suggestive of minimal transport of the alluvial sediments from their source areas. Chlorite, smectite, smectite-vermiculite intergrade, and illite are the likely phases involved in the sorption of organic carbon and related microbial redox transformations of metals in these sediments. Both the occurrence and abundance of chlorite, smectite-vermiculite, illite and smectite can therefore exert an important control on the contaminant fluxes and are important determinants of biogeofacies in mountainous, semiarid terrains.

Sediment sources and their contribution along northern coast of the South China Sea: Evidence from clay minerals of surface sediments

NASA Astrophysics Data System (ADS)

Liu, Jianguo; Yan, Wen; Chen, Zhong; Lu, Jun

2012-09-01

Clay minerals of surface sediment samples from nine bays/harbors along northern coast of the South China Sea (SCS) are used for sediment sources and contribution estimation in the study areas. Results reveal that sediments in the study bays/harbors seem to be a mixture of sediments from the Pearl, Hanjiang River and local islands/rivers, but their clay mineral assemblage is distinct from that of Luzon and Taiwan sediments, indicating that sediments are derived mainly from the neighboring sources through riverine input and partly from localized sediments. Due to input of local sediments in the northern SCS, sediments from both east of the Leizhou Peninsula (Area IV) and next to the Pearl River estuary (PRE, Area II) have high smectite percent. Affected by riverine input of the Pearl and Hanjiang Rivers, sediments in west of the PRE (Area III) and east of the PRE (Area I) have high illite (average 47%) and kaolinite (54%) percents, respectively. Sediment contributions of various major sources to the study areas are estimated as the following: (1) the Hanjiang River provide 95% and 84% sediments in Areas I and II, respectively, (2) the Pearl River supply 79% and 29% sediments in Areas III and IV, respectively and (3) local sediments contribute the rest and reach the maximum (˜71%) in Area IV.

Improved Monitoring Methods for Performance Assessment During Remediation of DNAPL Source Zones

DTIC Science & Technology

2010-04-01

partitioning behavior of TCE (Schwarzenbach et al. 2003). Kile et al. (1995) determined that the Koc values for two chlorinated solvents in the... Kile et al. (1995) that the sediment organic matter was less polar than the terrestrial material. This difference in polarity was assumed by Kile et al...of reasoning was tested further by Kile et al. (1999), who first related carbon functional group contents of whole soil and sediment samples with

Characterization and quantification of suspended sediment sources to the Manawatu River, New Zealand.

PubMed

Vale, S S; Fuller, I C; Procter, J N; Basher, L R; Smith, I E

2016-02-01

Knowledge of sediment movement throughout a catchment environment is essential due to its influence on the character and form of our landscape relating to agricultural productivity and ecological health. Sediment fingerprinting is a well-used tool for evaluating sediment sources within a fluvial catchment but still faces areas of uncertainty for applications to large catchments that have a complex arrangement of sources. Sediment fingerprinting was applied to the Manawatu River Catchment to differentiate 8 geological and geomorphological sources. The source categories were Mudstone, Hill Subsurface, Hill Surface, Channel Bank, Mountain Range, Gravel Terrace, Loess and Limestone. Geochemical analysis was conducted using XRF and LA-ICP-MS. Geochemical concentrations were analysed using Discriminant Function Analysis and sediment un-mixing models. Two mixing models were used in conjunction with GRG non-linear and Evolutionary optimization methods for comparison. Discriminant Function Analysis required 16 variables to correctly classify 92.6% of sediment sources. Geological explanations were achieved for some of the variables selected, although there is a need for mineralogical information to confirm causes for the geochemical signatures. Consistent source estimates were achieved between models with optimization techniques providing globally optimal solutions for sediment quantification. Sediment sources was attributed primarily to Mudstone, ≈38-46%; followed by the Mountain Range, ≈15-18%; Hill Surface, ≈12-16%; Hill Subsurface, ≈9-11%; Loess, ≈9-15%; Gravel Terrace, ≈0-4%; Channel Bank, ≈0-5%; and Limestone, ≈0%. Sediment source apportionment fits with the conceptual understanding of the catchment which has recognized soft sedimentary mudstone to be highly susceptible to erosion. Inference of the processes responsible for sediment generation can be made for processes where there is a clear relationship with the geomorphology, but is problematic for processes which occur within multiple terrains. Copyright © 2015 Elsevier B.V. All rights reserved.

Targeted versus statistical approaches to selecting parameters for modelling sediment provenance

NASA Astrophysics Data System (ADS)

Laceby, J. Patrick

2017-04-01

One effective field-based approach to modelling sediment provenance is the source fingerprinting technique. Arguably, one of the most important steps for this approach is selecting the appropriate suite of parameters or fingerprints used to model source contributions. Accordingly, approaches to selecting parameters for sediment source fingerprinting will be reviewed. Thereafter, opportunities and limitations of these approaches and some future research directions will be presented. For properties to be effective tracers of sediment, they must discriminate between sources whilst behaving conservatively. Conservative behavior is characterized by constancy in sediment properties, where the properties of sediment sources remain constant, or at the very least, any variation in these properties should occur in a predictable and measurable way. Therefore, properties selected for sediment source fingerprinting should remain constant through sediment detachment, transportation and deposition processes, or vary in a predictable and measurable way. One approach to select conservative properties for sediment source fingerprinting is to identify targeted tracers, such as caesium-137, that provide specific source information (e.g. surface versus subsurface origins). A second approach is to use statistical tests to select an optimal suite of conservative properties capable of modelling sediment provenance. In general, statistical approaches use a combination of a discrimination (e.g. Kruskal Wallis H-test, Mann-Whitney U-test) and parameter selection statistics (e.g. Discriminant Function Analysis or Principle Component Analysis). The challenge is that modelling sediment provenance is often not straightforward and there is increasing debate in the literature surrounding the most appropriate approach to selecting elements for modelling. Moving forward, it would be beneficial if researchers test their results with multiple modelling approaches, artificial mixtures, and multiple lines of evidence to provide secondary support to their initial modelling results. Indeed, element selection can greatly impact modelling results and having multiple lines of evidence will help provide confidence when modelling sediment provenance.

Geochemical studies of Fe, Mn, Co, As, Cr, Sb, Zn, Sc and V in surface sediments from Jiaozhou Bay

NASA Astrophysics Data System (ADS)

Wu, Run; Li, Pei-Quan; Miao, Lu-Tian; Zhang, Shu-Xin; Tian, Wei-Zhi

1994-12-01

The contents of nearly forty-elements in surface sediments in Jiaozhou Bay were determined using a Neutron Activation Analysis Technique (Grancini, et al., 1976; Li Peiquan et al., 1985, 1986; Li Xiuxia et al., 1986). This paper's detailed discussion on only nine elements (Fe, Mn, Co, Cr, Sc, As, Sb, Zn and V) includes their distributions, concentrations, correlationships, material sources, background, etc. Based on Zavaristski's classification method, Fe, Mn, Co, Cr and V belong to the second group; As and Sb to the eighth groups: Sc and Zn to the third and sixth groups. It was found that their notably good correlationship is mainly due to the similarity of their ionic structures and that their variation is controlled by the Fe content (except Mn). The source of sediments is mainly terristrial material, and the composition of sediment is similar to that of shale and shale+clay. The contents for a large number of elements are within the scope of the background level, but there still is pollution of Zn and Cr, at least in a few stations.

High levels of methylmercury in guano and ornithogenic coral sand sediments on Xisha islands, South China sea.

PubMed

Chen, Qianqian; Liu, Xiaodong; Xu, Liqiang; Sun, Liguang; Yan, Hong; Liu, Yi; Luo, Yuhan; Huang, Jing

2012-08-01

This study determined the distribution and main source of methylmercury in ornithogenic coral sand sediments and pure guano collected from Guangjin and Jinqing islets of the South China Sea. Results showed that the levels of methylmercury (MeHg) and total mercury (THg), as well as the percentage of MeHg relative to THg (%MeHg), are high in both fresh and ancient guano samples. %MeHg in ancient guano exceeded 70 %, much greater than that in fresh seabird droppings (~45 %). These results suggest that excretion through feces likely plays an important role in the cycling of MeHg by seabirds. Guano has been identified as the major source of MeHg in the ornithogenic coral sand sediments in the Xisha Islands. The close relationship between MeHg and guano-derived phosphorus has weakened considerably since 1840 AD. This is probably caused by a significant increase in THg and MeHg in modern guano samples due to the recent increase of Hg pollution. %MeHg in the ornithogenic coral sand sediments is extremely high, ranging from 10 to 30 % (average 20 %).

Levels and sources of heavy metals and PAHs in sediment of Djibouti-city (Republic of Djibouti).

PubMed

Mahdi Ahmed, Moussa; Doumenq, Pierre; Awaleh, Mohamed Osman; Syakti, Agung Dhamar; Asia, Laurence; Chiron, Serge

2017-07-15

Selected heavy metals and polycyclic aromatic hydrocarbons (PAHs) were determined in marine sediment from 28 sites Djibouti city. The concentrations of trace elements varied from 0 to 288.1mg/kg with relative abundance of trace metals in sediments was in the order of Zn>Cu>Ni>Cr>Co>Pb>Cd. Zn, Cu and Ni exceeded consensus based sediment quality guideline values 7, 14, 15 sites respectively. Enrichment factor and pollution load index showed relatively low to moderate contamination. The concentrations of total 16 PAHs varied widely depending on the sample location and ranged from 2.65 to 3760.11ng·g -1 , with the mean concentration value of 387.87ng·g -1 . Compositions and relative abundance of individual PAH using molecular diagnostic ratio using congener's m/z 178 and 202 indicated pyrolytic origin and reflecting a petroleum combustion, grass/wood and coal combustion and a petrogenic source. This study represents the first pollution baseline and a reference for future studies in Djibouti. Copyright © 2017 Elsevier Ltd. All rights reserved.

Combining sediment fingerprinting and a conceptual model for erosion and sediment transfer to explore sediment sources in an Alpine catchment

NASA Astrophysics Data System (ADS)

Costa, A.; Stutenbecker, L.; Anghileri, D.; Bakker, M.; Lane, S. N.; Molnar, P.; Schlunegger, F.

2017-12-01

In Alpine basins, sediment production and transfer is increasingly affected by climate change and human activities, specifically hydropower exploitation. Changes in sediment sources and pathways significantly influence basin management, biodiversity and landscape evolution. We explore the dynamics of sediment sources in a partially glaciated and highly regulated Alpine basin, the Borgne basin, by combining geochemical fingerprinting with the modelling of erosion and sediment transfer. The Borgne basin in southwest Switzerland is composed of three main litho-tectonic units, which we characterised following a tributary-sampling approach from lithologically characteristic sub-basins. We analysed bulk geochemistry using lithium borate fusion coupled with ICP-ES, and we used it to discriminate the three lithologic sources using statistical methods. Finally, we applied a mixing model to estimate the relative contributions of the three sources to the sediment sampled at the outlet. We combine results of the sediment fingerprinting with simulations of a spatially distributed conceptual model for erosion and transport of fine sediment. The model expresses sediment erosion by differentiating the contributions of erosional processes driven by erosive rainfall, snowmelt, and icemelt. Soil erodibility is accounted for as function of land-use and sediment fluxes are linearly convoluted to the outlet by sediment transfer rates for hillslope and river cells, which are a function of sediment connectivity. Sediment connectivity is estimated on the basis of topographic-hydraulic connectivity, flow duration associated with hydropower flow abstraction and permanent storage in hydropower reservoirs. Sediment fingerprinting at the outlet of the Borgne shows a consistent dominance (68-89%) of material derived from the uppermost, highly glaciated reaches, while contributions of the lower part (10-25%) and middle part (1-16%), where rainfall erosion is predominant, are minor. This result is confirmed by the model simulation which shows that, despite the large flow abstraction (about 90%), the upstream reaches contribute the most of the sediments. This study shows how combining geochemical techniques and sediment erosion models provides insight in the dynamics of sediment sources.

Community managed forests dominate the catchment sediment cascade in the mid-hills of Nepal: A compound-specific stable isotope analysis.

PubMed

Upadhayay, Hari Ram; Smith, Hugh G; Griepentrog, Marco; Bodé, Samuel; Bajracharya, Roshan Man; Blake, William; Cornelis, Wim; Boeckx, Pascal

2018-05-08

Soil erosion by water is critical for soil, lake and reservoir degradation in the mid-hills of Nepal. Identification of the nature and relative contribution of sediment sources in rivers is important to mitigate water erosion within catchments and siltation problems in lakes and reservoirs. We estimated the relative contribution of land uses (i.e. sources) to suspended and streambed sediments in the Chitlang catchment using stable carbon isotope signature (δ 13 C) of long-chain fatty acids as a tracer input for MixSIAR, a Bayesian mixing model used to apportion sediment sources. Our findings reveal that the relative contribution of land uses varied between suspended and streambed sediment, but did not change over the monsoon period. Significant over- or under-prediction of source contributions could occur due to overlapping source tracer values, if source groups are classified on a catchment-wide basis. Therefore, we applied a novel deconvolutional framework of MixSIAR (D-MixSIAR) to improve source apportionment of suspended sediment collected at tributary confluences (i.e. sub-catchment level) and at the outlet of the entire catchment. The results indicated that the mixed forest was the dominant (41 ± 13%) contributor of sediment followed by broadleaf forest (15 ± 8%) at the catchment outlet during the pre-wet season, suggesting that forest disturbance as well as high rainfall and steep slopes interact for high sediment generation within the study catchment. Unpaved rural road tracks located on flat and steep slopes (11 ± 8 and 9 ± 7% respectively) almost equally contributed to the sediment. Importantly, agricultural terraces (upland and lowland) had minimal contribution (each <7%) confirming that proper terrace management and traditional irrigation systems played an important role in mitigating sediment generation and delivery. Source contributions had a small temporal, but large spatial, variation in the sediment cascade of Chitlang stream. D-MixSIAR provided significant improvement regarding spatially explicit sediment source apportionment within the entire catchment system. This information is essential to prioritize implementation measures to control erosion in community managed forests to reduce sediment loadings to Kulekhani hydropower reservoir. In conclusion, using compound-specific stable isotope (CSSI) tracers for sediment fingerprinting in combination with a deconvolutional Bayesian mixing model offers a versatile approach to deal with the large tracer variability within catchment land uses and thus to successfully apportion multiple sediment sources. Copyright © 2018. Published by Elsevier B.V.

Geochemical assessment of metals and dioxin in sediment from the San Carlos Reservoir and the Gila, San Carlos, and San Francisco Rivers, Arizona

USGS Publications Warehouse

Church, Stan E.; Choate, LaDonna M.; Marot, Marci E.; Fey, David L.; Adams, Monique; Briggs, Paul H.; Brown, Zoe Ann

2005-01-01

In October 2004, we sampled stream-bed sediment, terrace sediment, and sediment from the San Carlos Reservoir to determine the spatial and chronological variation of six potentially toxic metals-Cu, Pb, Zn, Cd, As, and Hg. Water levels in the San Carlos Reservoir were at a 20-year low at an elevation of 2,409 ft (734.3 m). Four cores were taken from the reservoir: one from the San Carlos River arm, one from the Gila River arm, and two from the San Carlos Reservoir just west of the Pinal County line. Radioisotope chronometry (7Be, 137Cs, and 210Pb) conducted on sediment from the reservoir cores provides a good chronological record back to 1959. Chronology prior to that, during the 1950s, is based on our interpretation of the 137Cs anomaly in reservoir cores. During and prior to the 1950s, the reservoir was dry and sediment-accumulation rates were irregular; age control based on radioisotope data was not possible. We recovered sediment at the base of one 4-m-long core that may date back to the late 1930s. The sedimentological record contains two discrete events, one about 1978-83 and one about 1957, where the Cu concentration in reservoir sediment exceeded recommended sediment quality guidelines and should have had an effect on sensitive aquatic and benthic organisms. Concentrations of Zn determined in sediment deposited during the 1957(?) event also exceeded recommended sediment quality guidelines. Concentration data for Cu from the four cores clearly indicate that the source of this material was upstream on the Gila River. Lead isotope data, coupled with the geochemical data from a 2M HCl-1 percent H2O2 leach of selected sediment samples, show two discrete populations of data. One represents the dominant sediment load derived from the Safford Valley, and a second reflects sediment derived from the San Francisco River. The Cu concentration spikes in the reservoir cores have chemical and Pb isotope signatures that indicate that deposits in a porphyry copper deposit from the Morenci district is the likely source of these Cu-rich sedimentary deposits. Copper concentrations and Pb isotope data in premining terrace-sediment deposits indicate that the Cu peaks could not have resulted from erosion of premining sediment from terrace deposits downstream on the Gila River. The chemical and Pb isotope data also indicate that agricultural practices in the Safford Valley have resulted in an increased sediment load to the Gila River since large-scale farming began, prior to the time when the San Carlos Reservoir was built. Analyses of dioxin, which is an impurity in one of the herbicides used in the late 1960s and early 1970s, were completed in sediment from one of the cores in the reservoir to determine whether any of these pesticide residues have accumulated in the reservoir sediment. Dioxin concentration is expressed in terms of its toxicity (toxic equivalent concentration or TEQ). Concentrations of dioxin in the sediment ranged from 0.68 to 1.37 pg/g and are less than any of the benchmark concentrations recommended as threshold values for adverse effects of dioxin in sediment (> 2.5-10 pg/g).

Historical trends of metals in the sediments of San Francisco Bay, California

USGS Publications Warehouse

Hornberger, Michelle I.; Luoma, S.N.; VanGeen, A.; Fuller, C.; Anima, R.

1999-01-01

Concentrations of Ag, Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn were determined in six sediment cores from San Francisco Bay (SFB) and one sediment core in Tomales Bay (TB), a reference estuary. SFB cores were collected from between the head of the estuary and its mouth (Grizzly Bay, GB; San Pablo Bay, SP; Central Bay, CB; Richardson Bay, RB, respectively) and ranged in length from 150 to 250 cm. Concentrations of Cr, V and Ni are greater than mean crustal content in SFB and TB sediments, and greater than found in many other coastal sediments. However, erosion of ultramafic rock formations in the watershed appears to be the predominant source. Baseline concentrations of other metals were determined from horizons deposited before sediments were influenced by human activities and by comparing concentrations to those in TB. Baseline concentrations of Cu co-varied with Al in the SFB sediments and ranged from 23.7 ?? 1.2 ??g/g to 41.4 ?? 2.4 ??g/g. Baseline concentrations of other metals were less variable: Ag, 0.09 ?? 0.02 ??g/g; Pb, 5.2 ?? 0.7 ??g/g; Hg, 0.06 ?? 0.01 ??g/g; Zn, 78 ?? 7 ??g/g. The earliest anthropogenic influence on metal concentrations appeared as Hg contamination (0.3-0.4 ??g/g) in sediments deposited at SP between 1850 and 1880, apparently associated with debris from hydraulic gold mining. Maximum concentrations of Hg within the cores were 20 times baseline. Greater inventories of Hg at SP and GB than at RB verified the importance of mining in the watershed as a source. Enrichment of Ag, Pb, Cu and Zn first appeared after 1910 in the RB core, later than is observed in Europe or eastern North America. Maximum concentrations of Ag and Pb were 5-10 times baseline and Cu and Zn concentrations were less than three times baseline. Large inventories of Pb to the sediments in the GB and SP cores appeared to be the result of the proximity to a large Pb smelter. Inventories of Pb at RB are similar to those typical of atmospheric inputs, although influence from the Pb smelter is also suspected. Concentrations of Hg and Pb have decreased since the 1970s (to 0.30 ??g/g and 25 ??g/g, respectively) and were similar among all cores in 1990. Early Ag contamination was perhaps a byproduct of the Pb smelting process, but a modem source of Ag is also indicated, especially at RB and CB.

Downstream mixing of sediment and tracers in agricultural catchments: Evidence of changing sediment sources and fluvial processes?

NASA Astrophysics Data System (ADS)

Ralph, Timothy; Wethered, Adam; Smith, Hugh; Heijnis, Henk

2014-05-01

Land clearance, soil tillage and grazing in agricultural catchments have liberated sediment and altered hydrological connectivity between hillslopes and channels, leading to increased sediment availability, mobilisation and delivery to rivers. The type and amount of sediment supplied to rivers is critical for fluvial geomorphology and aquatic ecosystem health. Contemporary sediment dynamics are routinely investigated using environmental radionuclides such as caesium-137 (Cs-137) and excess lead-210 (Pb-210ex), which can provide information regarding sediment source types and fluvial processes if sediment sources can be distinguished from one another and mixing models applied to representative samples. However, downstream transport, mixing and dilution of radionuclide-labelled sediment (especially from sources with low initial concentrations) can obliterate the tracer signal; sometimes before anything of geomorphological importance happens in the catchment. Can these findings be used as evidence of sediment source variations and fluvial processes when the limits of detection (of Cs-137 in particular) are being exceeded so rapidly downstream? Sediment sources and downstream sediment dynamics were investigated in Coolbaggie Creek, a major supplier of sediment to the Macquarie River in an agricultural catchment with temperate to semi-arid climate in Australia. Radionuclides were used to discriminate between the <63 micron fraction of sediment sources including forested topsoils (Cs-137 11.28 +/- 0.75 Bq/kg; Pb-210ex 181.87 +/- 20.00 Bq/kg), agricultural topsoils (Cs-137 3.21 +/- 0.26 Bq/kg; Pb-210ex 29.59 +/- 10.94 Bq/kg) and sub-soils from channel banks and gullies (Cs-137 1.45 +/- 0.47 Bq/kg; Pb-210ex 4.67 +/- 1.93 Bq/kg). Within the trunk stream, suspended sediment, organic matter and Cs-137 and Pb-210ex concentrations declined downstream. Results from a mixing model suggest that agricultural topsoils account for 95% of fine sediment entering the channel in the upper reach (<10 km long), while sub-soils account for 90 to 100% of sediment entering and being transported in the remaining ~50 km of the system. This shift in dominant sediment source material coincided with a large increase in channel cross sectional area (~20 to >200 m2) downstream, with channel expansion and gullies contributing fine sediment to the system. A lack of topsoil being supplied to the channel suggests minimal lateral connectivity between the catchment and the trunk stream in all areas apart from the upper catchment. The enlargement and entrenchment of the channel downstream has also resulted in lateral disconnection between the channel and floodplain. In this case, a rapid reduction in radionuclide concentrations downstream does coincide with hydrogeomorphic changes, supporting their use for studying short-term sediment dynamics. These findings highlight the importance of understanding hydrogeomorphic processes and connectivity when interpreting sediment source and tracer data.

Sediment budget analysis of slope channel coupling and in-channel sediment storage in an upland catchment, southeastern Australia

NASA Astrophysics Data System (ADS)

Smith, Hugh G.; Dragovich, Deirdre

2008-11-01

Slope-channel coupling and in-channel sediment storage can be important factors that influence sediment delivery through catchments. Sediment budgets offer an appropriate means to assess the role of these factors by quantifying the various components in the catchment sediment transfer system. In this study a fine (< 63 µm) sediment budget was developed for a 1.64-km 2 gullied upland catchment in southeastern Australia. A process-based approach was adopted that involved detailed monitoring of hillslope and bank erosion, channel change, and suspended sediment output in conjunction with USLE-based hillslope erosion estimation and sediment source tracing using 137Cs and 210Pb ex. The sediment budget developed from these datasets indicated channel banks accounted for an estimated 80% of total sediment inputs. Valley floor and in-channel sediment storage accounted for 53% of inputs, with the remaining 47% being discharged from the catchment outlet. Estimated hillslope sediment input to channels was low (5.7 t) for the study period compared to channel bank input (41.6 t). However an estimated 56% of eroded hillslope sediment reached channels, suggesting a greater level of coupling between the two subsystems than was apparent from comparison of sediment source inputs. Evidently the interpretation of variability in catchment sediment yield is largely dependent on the dynamics of sediment supply and storage in channels in response to patterns of rainfall and discharge. This was reflected in the sediment delivery ratios (SDR) for individual measurement intervals, which ranged from 1 to 153%. Bank sediment supply during low rainfall periods was reduced but ongoing from subaerial processes delivering sediment to channels, resulting in net accumulation on the channel bed with insufficient flow to transport this material to the catchment outlet. Following the higher flow period in spring of the first year of monitoring, the sediment supplied to channels during this interval was removed as well as an estimated 72% of the sediment accumulated on the channel bed since the start of the study period. Given the seasonal and drought-dependent variability in storage and delivery, the period of monitoring may have an important influence on the overall SDR. On the basis of these findings, this study highlights the potential importance of sediment dynamics in channels for determining contemporary sediment yields from small gullied upland catchments in southeastern Australia.

Sources and ages of fine-grained sediment to streams using fallout radionuclides in the Midwestern United States

USGS Publications Warehouse

Gellis, Allen; Fuller, Christopher C.; Van Metre, Peter C.

2017-01-01

Fallout radionuclides, 7Be and 210Pbex, sampled in bed sediment for 99 watersheds in the Midwestern region of the United States and in 15 samples of suspended sediment from 3 of these watersheds were used to partition upland from channel sources and to estimate the age or the time since the surface-derived portion of sediment was on the land surface (0–∼1 year). Channel sources dominate: 78 of the 99 bed material sites (79%) have >50% channel-derived sediment, and 9 of the 15 suspended-sediment samples (60%) have >50% channel-derived sediment. 7Be was detected in 82 bed sediment samples and all 15 suspended-sediment samples. The surface-derived portion of 54 of the 80 (68%) streams with detectable 7Be and 210Pbex were ≤ 100 days old and the surface-derived portion of all suspended-sediment samples were ≤ 100 days old, indicating that surface-derived fine-grained sediment moves rapidly though these systems. The concentrations of two hydrophobic pesticides–DDE and bifenthrin–are correlated with the proportion of surface-derived sediment, indicating a link between geomorphic processes and particle-associated contaminants in streams. Urban areas had the highest pesticide concentrations and the largest percentage of surface-derived sediment. Although the percentage of surface-derived sediment is less than channel sources at most of the study sites, the relatively young age of the surface-derived sediment might indicate that management actions to reduce sediment contamination where the land surface is an important source could have noticeable effects.

Nitrous Oxide Production and Fluxes from Coastal Sediments under Varying Environmental Conditions

NASA Astrophysics Data System (ADS)

Ziebis, W.; Wankel, S. D.; de Beer, D.; Dentinger, J.; Buchwald, C.; Charoenpong, C.

2014-12-01

Although coastal zones represent important contributors to the increasing levels of atmospheric nitrous oxide (N2O), it is still unclear which role benthic processes play and whether marine sediments represent sinks or sources for N2O, since interactions among closely associated microbial groups lead to a high degree of variability. In addition, coastal areas are extremely dynamic regions, often exposed to increased nutrient loading and conditions of depleted oxygen. We investigated benthic N2O fluxes and how environmental conditions affect N2O production in different sediments at 2 different geographical locations (German Wadden Sea, a California coastal lagoon). At each location, a total of 32 sediment cores were taken in areas that differed in sediment type, organic content and pore-water nutrient concentrations, as well as in bioturbation activity. Parallel cores were incubated under in-situ conditions, low oxygen and increased nitrate levels for 10 days. Zones of N2O production and consumption were identified in intact cores by N2O microprofiles at the beginning and end of the experiments. In a collaborative effort to determine the dominant sources of N2O, samples were taken throughout the course of the experiments for the determination of the isotopic composition of N2O (as well as nitrate, nitrite and ammonium). Our results indicate that both, nitrate addition and low oxygen conditions in the overlying water, caused an increase of subsurface N2O production in most sediments, with a high variability between different sediment types. N2O production in the sediments was accompanied by N2O consumption, reducing the fluxes to the water column. In general, organic rich sediments showed the strongest response to environmental changes with increased production and efflux of N2O into the overlying water. Bioturbation activity added to the complexity of N2O dynamics by an increase in nitrification-denitrification processes, as well as enhanced pore-water transport. The results will be used in a metabolic modeling approach that will allow numerical simulation and prediction of sedimentary N2O dynamics.

The role of chemical and physical watershed processes in the remediation of AMD impacted streams

NASA Astrophysics Data System (ADS)

Lopez, D. A. L.; Kruse, N.; Bowman, J.

2016-12-01

Thousands of miles of streams in the United States are impacted by acid mine drainage (AMD) produced by the exploitation of metal and coal mines. Several methods of remediation are used to improve the water quality and recover the diversity in the aquatic life. One of these methods is the addition of alkaline materials to the stream to neutralize the water, precipitate minerals of heavy metals, and rise the pH. Parameters that are usually considered to determine the load of alkalinity to remediate the water include the acidity and flow of the source(s), and concentration of heavy metals. However, recent studies in AMD remediated streams in SE Ohio suggest that the evolution of the water and sediment chemistry along the stream after remediation is also important, and than that evolution depends no only in the added alkalinity but also in the physical and chemical characteristics of the impacted stream. Retention of precipitated fine-grained sediments is important to improve the physical environment for the aquatic life downstream. If sediment retention ponds cannot be constructed, the occurrence of areas where sediments can be deposited and stored is determined by the topographic gradient of the stream. A detailed high-resolution profile of the stream should be constructed to identify regions where the sediments can be retained. The addition of water, dissolved and suspended matter from tributaries to the main stem should also be considered. Tributaries can provide additional alkalinity or acidity to the stream helping to the remediation process or making it more difficult. Groundwater discharges to the stream can also provide either additional alkalinity or acidity to the stream, affecting the chemical budget. These additions from surface and/or groundwater can play an important role in stream recovery. A budget of alkalinity, acidity, and other chemical species along the impacted stream can provide important information to predict the effect of alkaline additions in stream recovery. Studies prior to remediation should not concentrate in the source alone but to consider the whole watershed impacted by the AMD sources.

Petrography and geochemistry characteristics of the lower Cretaceous Muling Formation from the Laoheishan Basin, Northeast China: implications for provenance and tectonic setting

NASA Astrophysics Data System (ADS)

Song, Yu; Liu, Zhaojun; Meng, Qingtao; Wang, Yimeng; Zheng, Guodong; Xu, Yinbo

2017-06-01

The petrography, mineralogy and geochemistry of sedimentary rocks from the lower Cretaceous Muling Formation (K1ml) in the Laoheishan basin, northeast (NE) China are studied to determine the weathering intensity, provenance and tectonic setting of the source region. Petrographic data indicate the average quartz-feldspar-lithic fragments (QFL) of the sandstone is Q = 63 %, F = 22 %, and L = 15 %. Lithic fragments mainly contain volcanic clasts that derived from surrounding basement. X-ray diffraction (XRD) data reveal abundant clay and detrital minerals (e.g. quartz), as well as minor calcite in the fine-grained sediments. The Hf contents and element concentration ratios such as Al2O3/TiO2, Co/Th, La/Sc, and La/Th are comparable to sediments derived from felsic and intermediate igneous rocks. The strong genetic relationship with the igneous rocks from the northwest and northeast areas provides evidence that the sediments of the Muling Formation (K1ml) in the Laoheishan basin have been derived from this area. The chemical index of alteration (CIA) and index of chemical variability (ICV) reveal an intensive weathering in the source region of the sediments. The multidimensional tectonic discrimination diagrams indicate that the source rocks of K1ml are mainly derived from the collision system. However, they may also comprise sediments derived from the continental rift system. The results are consistent with the geology of the study area.

Geochemical evidence for the provenance of aeolian deposits in the Qaidam Basin, Tibetan Plateau

NASA Astrophysics Data System (ADS)

Du, Shisong; Wu, Yongqiu; Tan, Lihua

2018-06-01

The main purpose of this study is to analyse the material source of different grain-size components of dune sand in the Qaidam Basin. We determined the trace and rare earth element (REE) compositions and Sr-Nd isotopic compositions of the coarse (75-500 μm) and fine (<75 μm) fractions of surface sediment samples. The comparison of the immobile trace element and REE compositions, Sr-Nd isotopic compositions and multidimensional scaling (MDS) results of the dune sands with those of different types of sediments in potential source areas revealed the following information. (1) The fine- and coarse-grained fractions of dune sands in the Qaidam Basin exhibit distinctly different elemental concentrations, elemental patterns and characteristic parameters of REE. Moreover, Sr-Nd isotopic differences also exist between different grain-size fractions of aeolian sand, which means that different grain-size fractions of these dune sands have different source areas. (2) The geochemical characteristics of the coarse particles of dune sand exhibit obvious regional heterogeneity and generally record a local origin derived from local fluvial sediments and alluvial/proluvial sediments. The coarse- and fine-grained dune sand in the southern Qaidam Basin mainly came from Kunlun Mountains, whereas the coarse- and fine-grained dune sand in the northeastern Qaidam Basin mainly came from Qilian Mountains. (3) The fine-grained fractions of sediments throughout the entire Qaidam Basin may have been affected by the input of foreign materials from the Tarim Basin.

Clay mineralogy of surface sediments as a tool for deciphering river contributions to the Cariaco Basin (Venezuela)

NASA Astrophysics Data System (ADS)

Bout-Roumazeilles, V.; Riboulleau, A.; du Châtelet, E. Armynot; Lorenzoni, L.; Tribovillard, N.; Murray, R. W.; Müller-Karger, F.; Astor, Y. M.

2013-02-01

The mineralogical composition of 95 surface sediment samples from the Cariaco Basin continental shelf and Orinoco delta was investigated in order to constrain the clay-mineral main provenance and distribution within the Cariaco Basin. The spatial variability of the data set was studied using a geo-statistical approach that allows drawing representative clay-mineral distribution maps. These maps are used to identify present-day dominant sources for each clay-mineral species in agreement with the geological characteristics of the main river watersheds emptying into the basin. This approach allows (1) identifying the most distinctive clay-mineral species/ratios that determine particle provenance, (2) evaluating the respective contribution of local rivers, and (3) confirming the minimal present-day influence of the Orinoco plume on the Cariaco Basin sedimentation. The Tuy, Unare, and Neveri Rivers are the main sources of clay particles to the Cariaco Basin sedimentation. At present, the Tuy River is the main contributor of illite to the western part of the southern Cariaco Basin continental shelf. The Unare River plume, carrying smectite and kaolinite, has a wide westward propagation, whereas the Neveri River contribution is less extended, providing kaolinite and illite toward the eastern Cariaco Basin. The Manzanares, Araya, Tortuga, and Margarita areas are secondary sources of local influence. These insights shed light on the origin of present-day terrigenous sediments of the Cariaco Basin and help to propose alternative explanations for the temporal variability of clay mineralogy observed in previously published studies.

Spatial characterization of riparian buffer effects on sediment loads from watershed systems.

PubMed

Momm, Henrique G; Bingner, Ronald L; Yuan, Yongping; Locke, Martin A; Wells, Robert R

2014-09-01

Understanding all watershed systems and their interactions is a complex, but critical, undertaking when developing practices designed to reduce topsoil loss and chemical/nutrient transport from agricultural fields. The presence of riparian buffer vegetation in agricultural landscapes can modify the characteristics of overland flow, promoting sediment deposition and nutrient filtering. Watershed simulation tools, such as the USDA-Annualized Agricultural Non-Point Source (AnnAGNPS) pollution model, typically require detailed information for each riparian buffer zone throughout the watershed describing the location, width, vegetation type, topography, and possible presence of concentrated flow paths through the riparian buffer zone. Research was conducted to develop GIS-based technology designed to spatially characterize riparian buffers and to estimate buffer efficiency in reducing sediment loads in a semiautomated fashion at watershed scale. The methodology combines modeling technology at different scales, at individual concentrated flow paths passing through the riparian zone, and at watershed scales. At the concentrated flow path scale, vegetative filter strip models are applied to estimate the sediment-trapping efficiency for each individual flow path, which are aggregated based on the watershed subdivision and used in the determination of the overall impact of the riparian vegetation at the watershed scale. This GIS-based technology is combined with AnnAGNPS to demonstrate the effect of riparian vegetation on sediment loadings from sheet and rill and ephemeral gully sources. The effects of variability in basic input parameters used to characterize riparian buffers, onto generated outputs at field scale (sediment trapping efficiency) and at watershed scale (sediment loadings from different sources) were evaluated and quantified. The AnnAGNPS riparian buffer component represents an important step in understanding and accounting for the effect of riparian vegetation, existing and/or managed, in reducing sediment loads at the watershed scale. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Unravelling metal mobility under complex contaminant signatures.

PubMed

de Souza Machado, Anderson Abel; Spencer, Kate L; Zarfl, Christiane; O'Shea, Francis T

2018-05-01

Metals are concerning pollutants in estuaries, where contamination can undergo significant remobilisation driven by physico-chemical forcing. Environmental concentrations of metals in estuarine sediments are often higher than natural backgrounds, but show no contiguity to potential sources. Thus, better understanding the metal mobility in estuaries is essential to improve identification of pollution sources and their accountability for environmental effects. This study aims to identify the key biogeochemical drivers of metal mobilisation on contaminated estuarine sediments through (1) evaluation of the potential mobilisation under controlled conditions, and (2) investigation of the relevance of metal mobilisation for in situ pollution levels in an area with multiple contaminant sources. Sediments from a saltmarsh adjacent to a coastal landfill, a marina, and a shipyard on the Thames Estuary (Essex, UK) were exposed in the laboratory (24h, N=96, 20°C) to water under various salinity, pH, and redox potential. Major cations, Fe(II), and trace metal concentrations were analysed in the leachate and sediment. Salinity, pH and redox had a significant effect on metal mobilisation (p<0.001), e.g. under certain conditions Fe(II) leaching was increased ~1000-fold. Measurements in situ of surface and subsurface sediment cores revealed that landfill proximity poorly explained metal spatial distribution. However, physicochemical parameters explained up to 97% of geochemically normalized metal concentrations in sediments. Organic matter and pH were dominant factors for most of the metal concentrations at the sediment surface. At subsurface, major cations (Ca, Na, Mg and K) were determinant predictors of metal concentrations. Applying the empirical model obtained in the laboratory to geochemical conditions of the studied saltmarsh it was possible to demonstrate that Fe mobilisation regulates the fate of this (and other) metal in that area. Thus, present results highlight the importance of metal mobility to control sediment pollution and estuarine fate of metals. Copyright © 2017 Elsevier B.V. All rights reserved.

Tracking channel-floodplain sediment exchange with conservative and non-conservative geochemical tracers

NASA Astrophysics Data System (ADS)

Belmont, Patrick; Stout, Justin

2013-04-01

Fine sediment is routed through landscapes and channel networks in a highly unsteady and non-uniform manner, potentially experiencing deposition and re-suspension many times during transport from source to sink. Developing a better understanding of sediment routing at the landscape scale is an intriguing challenge from a modeling perspective because it requires consideration of a multitude of processes that interact and vary in space and time. From an applied perspective, an improved understanding of sediment routing is essential for predicting how conservation and restoration practices within a watershed will influence water quality, to support land and water management decisions. Two key uncertainties in predicting sediment routing at the landscape scale are 1) determining the proportion of suspended sediment that is derived from terrestrial (soil) erosion versus channel (bank) erosion, and 2) constraining the proportion of sediment that is temporarily stored and re-suspended within the channel-floodplain complex. Sediment fingerprinting that utilizes a suite of conservative and non-conservative geochemical tracers associated with suspended sediment can provide insight regarding both of these key uncertainties. Here we present a model that tracks suspended sediment with associated conservative and non-conservative geochemical tracers. The model assumes that particle residence times are described by a bimodal distribution wherein some fraction of sediment is transported through the system in a relatively short time (< 1 year) and the remainder experiences temporary storage (of variable duration) within the channel-floodplain complex. We use the model to explore the downstream evolution of non-conservative tracers under equilibrium conditions (i.e., exchange between the channel and floodplain is allowed, but no net change in channel-floodplain storage can occur) to illustrate how the process of channel-floodplain storage and re-suspension can potentially bias interpretation of sediment fingerprinting results. We then apply the model to explain measurements of meteoric Beryllium-10, Lead-210, and Cesium-137 associated with suspended sediment in two very different rivers, one incising (Le Sueur River, south-central Minnesota, USA) and the other aggrading (Root River, southeastern Minnesota, USA) in response to base level fall and rise, respectively. The Le Sueur River exhibits a remarkably narrow range of tracer concentrations in source areas, which include agricultural fields, alluvial banks, and bluffs. Suspended sediment samples collected immediately above and below the 30 km long incising reach show a systematic shift in terrestrial sources in the downstream direction, indicated by changes in Beryllium-10 concentrations. The Root River indicates a more variable erosion history, with significant variability of Beryllium-10 concentrations in source areas (agricultural fields, forested hillslopes, and alluvial floodplains and terraces) and inverted Beryllium-10 depth profiles (higher concentrations at depth, suggesting unsteady erosion and significant storage of legacy sediment). Both rivers show a systematic disparity in normalized concentrations of conservative versus non-conservative tracers, indicating that significant storage and re-suspension occurs in both systems as the sediment is routed through the channel-floodplain complex.

First post-fire flush in a Mediterranean temporary stream: source ascription in bed sediments

NASA Astrophysics Data System (ADS)

Estrany Bertos, Joan; García-Comendador, Julián; Fortesa, Josep; Calsamiglia, Aleix; Garcias, Francesca

2017-04-01

First flushes can be of great importance for suspended-sediment transport in fluvial systems of drylands, being temporary streams a characteristic feature of Mediterranean basins. After a wildfire, storm flows may enhance runoff delivery to channels and then increasing the first-flush effect. 137Cs and 210Pbex were used as tracers for recognizing the first post-fire flush effect in the source ascription of bed sediments temporarily stored in a Mediterranean temporary stream severely affected by a wildfire. Thirty potential sediment source samples were collected along the main stem of a catchment located in Mallorca (Spain) during a field campaign developed some weeks after the wildfire. The sample collection was designed considering the wildfire affection, and also distinguishing between soil surface and channel bank. To quantify the relative source contribution to the bed sediment temporarily stored, five sediment samples -deposited during the first storm occurred three months after the wildfire- were collected into the bed stream of the main channel. The 137Cs and 210Pbex concentrations were measured by gamma spectrometry. Then, a linear mixing model was used to establish the relative contribution of each source type to the bed sediments discerning between the most upstream and the downstream parts of the catchment. Post-fire first-flush effect was generated by a torrential event with a suspended-sediment concentration peak ca. 33,618 mg L-1, although transmission losses under a very low runoff coefficient (1%) promoted sediment deposition. Significant differences were observed in fallout radionuclide concentrations between burned surface soil and channel bank samples (p < 0.05), as well as between burned and unburned sources at the downstream part of the catchment (p < 0.01). The radioactivity concentrations in bed sediments samples were statistically similar (p > 0.05). Source ascription in bed sediments in the middle stream shows that 67% was generated in burned hillslopes, reaching 75% in the downstream part because downstream propagation of the sediment derived from the burned area. Bed sediments were mostly generated in burned hillslopes because of the fire effects on soils and sediment availability, high intensity rainfall and limited contribution of channel banks that are fixed by dry-stone walls. This hydro-sedimentary response indicates an association between driven sediment transport factors and sediment availability, generating an effective slope-to-channel sediment connectivity. Long-term sediment sources monitoring will elucidate if the most effective period of the window of disturbance at catchment scale is further extended (i.e., ≈5 years).

Storm Event Suspended Sediment-Discharge Hysteresis and Controls in Agricultural Watersheds: Implications for Watershed Scale Sediment Management.

PubMed

Sherriff, Sophie C; Rowan, John S; Fenton, Owen; Jordan, Philip; Melland, Alice R; Mellander, Per-Erik; hUallacháin, Daire Ó

2016-02-16

Within agricultural watersheds suspended sediment-discharge hysteresis during storm events is commonly used to indicate dominant sediment sources and pathways. However, availability of high-resolution data, qualitative metrics, longevity of records, and simultaneous multiwatershed analyses has limited the efficacy of hysteresis as a sediment management tool. This two year study utilizes a quantitative hysteresis index from high-resolution suspended sediment and discharge data to assess fluctuations in sediment source location, delivery mechanisms and export efficiency in three intensively farmed watersheds during events over time. Flow-weighted event sediment export was further considered using multivariate techniques to delineate rainfall, stream hydrology, and antecedent moisture controls on sediment origins. Watersheds with low permeability (moderately- or poorly drained soils) with good surface hydrological connectivity, therefore, had contrasting hysteresis due to source location (hillslope versus channel bank). The well-drained watershed with reduced connectivity exported less sediment but, when watershed connectivity was established, the largest event sediment load of all watersheds occurred. Event sediment export was elevated in arable watersheds when low groundcover was coupled with high connectivity, whereas in the grassland watershed, export was attributed to wetter weather only. Hysteresis analysis successfully indicated contrasting seasonality, connectivity and source availability and is a useful tool to identify watershed specific sediment management practices.

Sources and Distribution of Organic Matter in Sediments of the Louisiana Continental Shelf

EPA Science Inventory

Both riverine and marine sources of organic matter (OM) contribute to sediment organic pools, and either source can contribute significantly to sediment accumulation, burial, and remineralization rates on river dominated continental shelf systems. For the Louisiana continental sh...

Quantifying ratios of suspended sediment sources in forested headwater streams following timber-harvesting operations

NASA Astrophysics Data System (ADS)

Rachels, A. A.; Bladon, K. D.; Bywater-Reyes, S.

2017-12-01

Historically, timber-harvesting has increased fine sediment inputs to streams due to increased hillslope and streambank erosion and mass wasting along roads. However, under modern best management practices, the relative importance and variability of these sources is poorly understood. We present preliminary results from an ongoing study investigating the primary sources of suspended sediment in Oregon Coast Range streams influenced by timber harvesting. We instrumented two catchments, Enos Creek (harvested 2016) and Scheele Creek (reference) in fall 2016. Phillips samplers (5-6 per catchment) have been deployed longitudinally down the streams to enable robust characterization of suspended sediments—the collected samples integrate the chemical signatures of upstream sediment exports. We will collect samples monthly over 2 wet seasons and return to the laboratory to analyze the sediment using source fingerprinting approaches. The fingerprinting technique compares the chemical properties of stream sediment samples with the chemical properties of potential source areas, including 1) roads, 2) stream banks, and 3) hillslopes. To design a robust model for sediment-source identification, different types of chemical data are required—we will analyze sediment samples using a combination of: a) stable isotopes and C/N ratios (i.e., δ15N, δ13C, and C/N), b) geochemistry (Fe, K, and Ca), and c) radiogenic isotopes (137Cs and 210Pb). At the harvested site, the C/N ratios of the streambanks (17.9 ± 3.8) and the hillslopes (26.4 ± 4.8) are significantly different from one another (p = .016). C/N ratios of the suspended sediment (20.5 ± 2.0) are intermediate values between potential endmembers and behave conservatively with transport. The C/N ratios of the suspended sediment appear unaffected by roads (18.9 ± 8.7) along specific sections of the stream, suggesting that roads are not a primary sediment contributor. Under this assumption, the suspended sediment is, on average, comprised of 69.5% streambank sediments and 30.5% hillslope sediments. Additional analyses are required (and in progress) to support these implications and to further interpret the importance and variability of suspended sediment sources through both space (from head to outlet) and time.

Pb’s high sedimentation inside the bay mouth of Jiaozhou Bay

NASA Astrophysics Data System (ADS)

Yang, Dongfang; Miao, Zhenqing; Huang, Xinmin; Wei, Linzhen; Feng, Ming

2017-12-01

Sedimentation is one of the key environmental behaviors of pollutants in the ocean. This paper analyzed the seasonal and temporal variations of Pb’s sedimentation process in Jiaozhou Bay in 1987. Results showed that Pb contents in bottom waters in Jiaozhou Bay in May, July and November 1987 were 1.87-2.60 μg L-1, 15.11-19.68 μg L-1 and 11.08-15.18 μg L-1, and the pollution levels of Pb in May, July and November 1987 were slight, heavy and heavy, respectively. In May 1987, there was low sedimentation process in waters in the outside of the bay mouth, yet were high sedimentation process in waters in the middle and inside of the bay mouth. In July and November 1987, there was low sedimentation process in waters in the outside of the bay mouth, yet were high sedimentation process in waters in the inside of the bay mouth. The seasonal-temporal variation of sedimentation processes of Pb were determined by the variations of sources input and the vertical water’s effect.

Constraining Lipid Biomarker Paleoclimate Proxies in a Small Arctic Watershed

NASA Astrophysics Data System (ADS)

Dion-Kirschner, H.; McFarlin, J. M.; Axford, Y.; Osburn, M. R.

2017-12-01

Arctic amplification of climate change renders high-latitude environments unusually sensitive to changes in climatic conditions (Serreze and Barry, 2011). Lipid biomarkers, and their hydrogen and carbon isotopic compositions, can yield valuable paleoclimatic and paleoecological information. However, many variables affect the production and preservation of lipids and their constituent isotopes, including precipitation, plant growth conditions, biosynthesis mechanisms, and sediment depositional processes (Sachse et al., 2012). These variables are particularly poorly constrained for high-latitude environments, where trees are sparse or not present, and plants grow under continuous summer light and cool temperatures during a short growing season. Here we present a source-to-sink study of a single watershed from the Kangerlussuaq region of southwest Greenland. Our analytes from in and around `Little Sugarloaf Lake' (LSL) include terrestrial and aquatic plants, plankton, modern lake water, surface sediments, and a sediment core. This diverse sample set allows us to fulfill three goals: 1) We evaluate the production of lipids and isotopic signatures in the modern watershed in comparison to modern climate. Our data exhibit genus-level trends in leaf wax production and isotopic composition, and help clarify the difference between terrestrial and aquatic signals. 2) We evaluate the surface sediment of LSL to determine how lipid biomarkers from the watershed are incorporated into sediments. We constrain the relative contributions of terrestrial plants, aquatic plants, and other aquatic organisms to the sediment in this watershed. 3) We apply this modern source-to-sink calibration to the analysis of a 65 cm sediment core record. Our core is organic-rich, and relatively high deposition rates allow us to reconstruct paleoenvironmental changes with high resolution. Our work will help determine the veracity of these common paleoclimate proxies, specifically for research in southwest Greenland, and will enable an accurate, high-resolution watershed-level reconstruction of Holocene conditions. Serreze, M. and Barry, R. (2011). Global and Planetary Change, 77, 85-96. Sachse, D., et al. (2012). Annual Review of Earth and Planetary Sciences, 40, 221-249.

K/Ar Dating of Fine Grained Sediments Near Prydz Bay, Antarctica: East Antarctic Ice Sheet Behavior During the Middle-Miocene Climate Transition

NASA Astrophysics Data System (ADS)

Duchesne, A. E.; Pierce, E. L.; Williams, T.; Hemming, S. R.; Johnson, D. L.; May, T.; Gombiner, J.; Torfstein, A.

2012-12-01

¶ The Middle Miocene Climate Transition (MMCT) (~14 Ma) represents a time of major East Antarctic Ice-Sheet (EAIS) expansion, with research suggesting major global sea level fall on the order of ~60 meters (John et al., 2011, EPSL). Ocean Drilling Program (ODP) core data from Site 1165B near Prydz Bay shows an influx of cobbles deposited ~13.8-13.5 Ma, representing a sudden burst of ice-rafted detritus (IRD) during the MMCT. Based on 40Ar/39Ar dating of hornblendes and/or biotite grains, 5 of 6 dated pebbles from a companion study show Wilkes Land origins, indicating transport from over 1500 kilometers away. However, samples throughout this time interval have an anomalously low abundance of sand, thus we seek to understand the sedimentary processes that led to the deposition of these isolated dropstones in a fine matrix through provenance studies of the core's terrigenous fine fraction. Geochemical provenance studies of the terrigenous fraction of marine sediments can aid in identifying past dynamic EAIS behavior; the few outcrops available on the continent provide specific rock characterizations and age constraints from which cored marine sediments can then be matched to using established radiogenic isotope techniques. Here we apply the K/Ar dating method as a provenance tool for identifying the source area(s) of fine-grained terrigenous sediments (<63 μm) deposited during the MMCT. ¶ After source area characterization, we find that the fine-grained sediments from the mid-Miocene show a mixture of both local Prydz Bay sourcing (~400 Ma signature) and Wilkes Land provenance (~900 Ma signature). While locally-derived Prydz Bay sediments are likely to have been delivered via meltwater from ice and deposited as hemipelagic sediments (with some possible bottom current modification, as this is a drift site), sediments sourced from Wilkes Land required transport via large icebergs. Future work will involve further provenance determination on both the fine-grained sediments and the abundant dropstones deposited at ODP Site 1165B during the MMCT. We anticipate that the use of the K/Ar radiometric dating technique as a proxy for the study of glacially transported fine-grained terrigenous materials will enable future Antarctic provenance research and further aid in providing insight into past EAIS behavior.; ODP Core 34X from Site 1165B

Streambanks: A net source of sediment and phosphorus to streams and rivers.

PubMed

Fox, Garey A; Purvis, Rebecca A; Penn, Chad J

2016-10-01

Sediment and phosphorus (P) are two primary pollutants of surface waters. Many studies have investigated loadings from upland sources or even streambed sediment, but in many cases, limited to no data exist to determine sediment and P loading from streambanks on a watershed scale. The objectives of this paper are to review the current knowledge base on streambank erosion and failure mechanisms, streambank P concentrations, and streambanks as P loading sources and then also to identify future research needs on this topic. In many watersheds, long-term loading of soil and associated P to stream systems has created a source of eroded soil and P that may interact with streambank sediment and be deposited in floodplains downstream. In many cases streambanks were formed from previously eroded and deposited alluvial material and so the resulting soils possess unique physical and chemical properties from adjacent upland soils. Streambank sediment and P loading rates depend explicitly on the rate of streambank migration and the concentration of P stored within bank materials. From the survey of literature, previous studies report streambank total P concentrations that consistently exceeded 250 mg kg(-1) soil. Only a few studies also reported water soluble or extractable P concentrations. More research should be devoted to understanding the dynamic processes between different P pools (total P versus bioavailable P), and sorption or desorption processes under varying hydraulic and stream chemistry conditions. Furthermore, the literature reported that streambank erosion and failure and gully erosion were reported to account for 7-92% of the suspended sediment load within a channel and 6-93% of total P. However, significant uncertainty can occur in such estimates due to reach-scale variability in streambank migration rates and future estimates should consider the use of uncertainty analysis approaches. Research is also needed on the transport rates of dissolved and sediment-bound P through the entire stream system of a watershed to identify critical upland and/or near-stream conservation practices. Extensive monitoring of the impact of restoration/rehabilitation efforts on reducing sediment and P loading are limited. From an application standpoint, streambank P contributions to streams should be more explicitly accounted for in developing total maximum daily loads in watersheds. Copyright © 2016 Elsevier Ltd. All rights reserved.

Spatial distribution of enteric viruses and somatic coliphages in a Lagoon used as drinking water source and recreation in Southern Brazil.

PubMed

Elmahdy, M E I; Fongaro, G; Magri, M E; Petruccio, M M; Barardi, C R M

2016-10-01

This study aimed to evaluate the contamination level of the Peri Lagoon, the main freshwater reservoir of Santa Catarina Island, Southern Brazil, for human adenovirus (HAdV), hepatitis A virus (HAV), rotavirus species A (RVA), and somatic coliphages (SOMCPH). Viruses were also investigated in sediments and their sensitivity against natural sunlight was analysed by studying their spatial distribution in different depths of the water column. A total of 84 water samples and 48 sediment samples were examined by qPCR or RT-qPCR. Infectivity of HAdV and SOMCPH was determined and quantified by plaque assay method. A sum of 64% and 48% of water and sediment samples were positive for HAdV, respectively. RVA was present in 33% and 18% of water and sediment samples, and 25% of water samples were positive for HAV. HAdV were infectious in 76% of water and 83% of sediment samples that were positive by qPCR. SOMCPH could be detected in 42% and 18% of water and sediment samples, respectively. The data pointed a variation of viruses' prevalence according to the different water column depths. These results demonstrated that water sources and sediments contaminated by human wastes could play an important role in the recontamination of water columns harvested for further treatment or used for recreational purposes. These data can be of great value for future risk assessment analysis. Copyright © 2016. Published by Elsevier GmbH.

Geochemistry of Sediment from IODP Expeditions 322 and 333: Terrigenous Provenance, Dispersed Ash, and the Nankai 'Subduction Factory'

NASA Astrophysics Data System (ADS)

Scudder, R.; Murray, R. W.; Schindlbeck, J.; Kutterolf, S.

2013-12-01

Terrigenous material and volcanic ash play important roles in the IODP Seismogenic Zone and 'Subduction Factory' initiatives. Particularly relevant to these projects are studies of geochemical budgets including how fluids within subducting sediment will be affected by hydration/dehydration reactions. Of great importance is the volcanic component, which occurs both as discrete ash layers and as ash dispersed throughout the sediment column and their related altered products in the down-going plate. Based on bulk sedimentary geochemical studies of IODP Sites C0011 and C0012 drilled during Expeditions 322 and 333, we will show the importance of dispersed ash to the Nankai subduction zone and document important changes in terrigenous provenance to these locations. The major elemental characteristics of the hemipelagic mudstones are remarkably consistent both downcore and between Site C0011 and Site C0012. For example, the average Si/Al ratio at both sites C0011 and C0012 is 3.3 × 0.2. This is observed in other key major elemental indicators as well (e.g., Fe2O3). Alkali elements, Trace elements and REEs exhibit greater downcore variability while remaining consistent between the sites. Ternary diagrams such as La-Th-Sc and Sc-Cr-Th as well as other geochemical plots (i.e., Sm/Al vs. Th/Al) show that Site C0011 and Site C0012 are fairly clustered, derived primarily from a continental arc source, and that distal sources to the sediment are important in addition to a modest and varying component from the proximal Izu-Bonin Island Arc. Multivariate statistical treatments are further being applied to the datasets from these sites to allow a better determination of the number of sources that make up the bulk sediment (and their provenance). Q-mode Factor Analysis was performed in order to determine the composition of potential end member contributions to these sites. The multivariate statistics indicate Site C0011 and C0012 each have 4-5 end members that explain 98% of the total variance in the data. These factors include those with very high SiO2, some with intermediate SiO2, and carbonate components. Applying these results in conjunction with Total Inversion, a linear regression technique, will allow us to determine the compositional variation of these end members. The potential mineralogical implications of these sources, contributing different amounts and species of magmatic minerals to the sediment, will also be presented. In addition we will examine the relationship between the source(s) of the discrete ash layers to the provenance of the dispersed ash component. Shipboard visual studies of the discrete ash layers identified at least two broad types of ash present at each site. Electron microprobe analysis of individual glass shards from ash layers at Sites 322 and 333 confirms the presence of two types of ash, the majority of the ashes are rhyolitic, while the rest are andesitic to dacitic in composition. Additionally, shipboard smear slide analysis noted a sharp gradient of glass alteration in ash layers at the Unit IA/IB boundary at Site C0011. Further work will determine how these discrete ash layers relate to the composition of the dispersed ash particularly in this section.

The Characteristics of Turbidite Beds of Southwest Ryukyu Trench Floor: A new Approach From the X-ray Fluorescence Core Scanning Analysis

NASA Astrophysics Data System (ADS)

Hsiung, K. H.; Kanamatsu, T.; Ikehara, K.; Usami, K.; Saito, S.; Murayama, M.

2017-12-01

The southwest Ryukyu Trench near Taiwan is an ideal place for source-to-sink studies based on the distinctive sediment transport route between the terrestrial sediment source in Taiwan and the marine sink in the Ryukyu Trench. Using the bathymetric and seismic reflection data, we develop a sediment transport routes for understanding the ultimate sink of the southwest Ryukyu Trench floor. The southwest Ryukyu Trench floor can be regarded as the most distal depositional basin and isolated from the Ryukyu forearc basins. In addition, part of sediment from the proximal sources of the Ryukyu Islands and Yaeyama accretionary prism could be transported to the trench floor. We collected the piston core, PC04, from the southwest Ryukyu Trench floor of 6,147 m water depth in 3.23 m core length from cruise KR15-18, 2015. The coring site locates behind the natural levee of an obvious channel in the Ryukyu trench floor. The PC04 is composed of gray silty clay interbedded with numerous silt layers. Most of the silt layers are less than 2 cm in thickness. Based upon the core observation, X-ray fluorescence core scanning analysis and 14C age determinations, thirty-seven individual and thin beds were determined as turbidites. The results of X-ray fluorescence core scanning analysis provide continuous and high-resolution (1.0 mm of each point) assessment of relative change in the elemental ratios. Ca/Fe is a proxy for the terrigenous component of the sediment, indicating the High Ca and low Fe of each turbidite layers. Zr/Rb ratios of the marine sediments commonly used in the reflection of the original grain size variation. A large part of deep-sea turbidite beds are characterized by high Ca/Fe and Zr/Rb ratio values. These turbidite beds can be linked spatially over a distance of ˜200 km via submarine canyons within the Taiwan orogen. However, it is difficult to be linked temporally to certain events.

Heavy metal in sediments of Ziya River in northern China: distribution, potential risks, and source apportionment.

PubMed

Zhu, Xiaolei; Shan, Baoqing; Tang, Wenzhong

2016-12-01

The concentration partitioning between the sediment particle and the interstitial water phase plays an important role in controlling the toxicity of heavy metals in aquatic systems. The aim of this study was to assess the sediment quality in a polluted area of the Ziya River, Northern China. The contamination potential and bioavailability of six metals were determined from the concentrations of total metals and the bioavailable fractions. The results showed that the concentrations of Cr, Cu, Ni, Zn, and Pb exceeded the probable effect concentration at several sites. The high geoaccumulation indices showed that the sediments were seriously contaminated by Cd. The ratio of acid-volatile sulfide (AVS) to simultaneously extracted metal (SEM) was higher than 1, which indicated that the availability of metals in sediments was low. The risk assessment of interstitial waters confirmed that there was little chance of release of metals associated with acid-volatile sulfide into the water column. Values of the interstitial water criteria toxicity unit indicated that none of the concentrations of the studied metals exceeded the corresponding water quality thresholds of the US Environmental Protection Agency. Positive matrix factorization showed that the major sources of metals were related to anthropogenic activities. Further, if assessments are based on total heavy metal concentrations, the toxicity of heavy metals in sediment may be overestimated.

Influence of reactive sulfide (AVS) and supplementary food on Ag, Cd and Zn bioaccumulation in the marine polychaete Neanthes arenaceodentata

USGS Publications Warehouse

Lee, J.-S.; Lee, B.-G.; Yoo, H.; Koh, C.-H.; Luoma, S.N.

2001-01-01

A laboratory bioassay determined the relative contribution of various pathways of Ag, Cd and Zn bioaccumulation in the marine polychaete Neanthes arenaceodentata exposed to moderately contaminated sediments. Juvenile worms were exposed for 25 d to experimental sediments containing 5 different reactive sulfide (acid volatile sulfides, AVS) concentrations (1 to 30 ??mol g-1), but with constant Ag, Cd, and Zn concentrations of 0.1, 0.1 and 7 ??mol g-1, respectively. The sediments were supplemented with contaminated food (TetraMin??) containing 3 levels of Ag-Cd-Zn (uncontaminated, 1?? or 5??1 metal concentrations in the contaminated sediment). The results suggest that bioaccumulation of Ag, Cd and Zn in the worms occurred predominantly from ingestion of contaminated sediments and contaminated supplementary food. AVS or dissolved metals (in porewater and overlying water) had a minor effect on bioaccumulation of the 3 metals in most of the treatments. The contribution to uptake from the dissolved source was most important in the most oxic sediments, with maximum contributions of 8% for Ag, 30% for Cd and 20% for Zn bioaccumulation. Sediment bioassays where uncontaminated supplemental food is added could seriously underestimate metal exposures in an equilibrated system; N. arenaceodentata feeding on uncontaminated food would be exposed to 40-60% less metal than if the food source was equilibrated (as occurs in nature). Overall, the results show that pathways of metal exposure are dynamically linked in contaminated sediments and shift as external geochemical characteristics and internal biological attributes vary.

Tapping the deglacial secrets of Lake Oneida sediments: Establishing a connection between radiocarbon and paleomagnetics in Fish Creek sediments

NASA Astrophysics Data System (ADS)

Peck, D.; Rosenheim, B. E.; Ridge, J. C.

2017-12-01

Postglacial varved and rhythmically-laminated clays deposited within the Ontario Basin are often associated with the retreat of the Laurentide Ice Sheet immediately preceding the onset of the Younger Dryas. The paleoclimatic significance of the Ontario Basin has made it a popularly studied region. To determine ages that correlate with ice sheet retreat, classical radiocarbon ages were generated. However low total organic carbon (TOC) values found in glaciolacustrine sediments make accuracy of data a concern. Using the magnetic orientation of sediments during deposition, paleomagnetism has presented reliable dates in similar regions across the northeastern United States. While useful, paleomagnetism also comes with limitations, which have left areas of unexplored research. Lake Oneida, last glaciated by the Ontario Lobe, is one of the deepest and most untapped reservoirs of sediment dating back to the retreat of the Laurentide Ice Sheet, due primarily to the difficulty it poses for classical methods. Using samples taken from exposed varved glaciolacustrine sediment exposed by the downcutting of Fish Creek, a fluvial system terminating in eastern Lake Oneida, we compare Ramped Pyrolysis 14C data with paleomagnetic data. Ramped PyrOx 14C data unmask the distribution of ages in the organic matter of these sediments, at least partially separating autochthonous sources of carbon from allochthonous sources that tend to be older in these settings. Our comparison will test whether Ramped PyrOx 14C data match paleomagnetic data well enough to be used as the sole chronometer in sediment cores taken from Lake Oneida cores for which paleomagnetic orientation becomes more difficult to ascertain.

Coal-tar-based sealcoated pavement: a major PAH source to urban stream sediments.

PubMed

Witter, Amy E; Nguyen, Minh H; Baidar, Sunil; Sak, Peter B

2014-02-01

We used land-use analysis, PAH concentrations and assemblages, and multivariate statistics to identify sediment PAH sources in a small (~1303 km(2)) urbanizing watershed located in South-Central, Pennsylvania, USA. A geographic information system (GIS) was employed to quantify land-use features that may serve as PAH sources. Urban PAH concentrations were three times higher than rural levels, and were significantly and highly correlated with combined residential/commercial/industrial land use. Principal components analysis (PCA) was used to group sediments with similar PAH assemblages, and correlation analysis compared PAH sediment assemblages to common PAH sources. The strongest correlations were observed between rural sediments (n = 7) and coke-oven emissions sources (r = 0.69-0.78, n = 5), and between urban sediments (n = 22) and coal-tar-based sealcoat dust (r = 0.94, n = 47) suggesting that coal-tar-based sealcoat is an important urban PAH source in this watershed linked to residential and commercial/industrial land use. Copyright © 2013 Elsevier Ltd. All rights reserved.

The response of source-bordering aeolian dunefields to sediment-supply changes 1: Effects of wind variability and river-valley morphodynamics

USGS Publications Warehouse

Sankey, Joel B.; Kasprak, Alan; Caster, Joshua; East, Amy; Fairley, Helen C.

2018-01-01

Source-bordering dunefields (SBDs), which are primarily built and maintained with river-derived sediment, are found in many large river valleys and are currently impacted by changes in sediment supply due to climate change, land use changes, and river regulation. Despite their importance, a physically based, applied approach for quantifying the response of SBDs to changes in sediment supply does not exist. To address this knowledge gap, here we develop an approach for quantifying the geomorphic responses to sediment-supply alteration based on the interpretation of dunefield morphodynamics from geomorphic change detection and wind characteristics. We use the approach to test hypotheses about the response of individual dunefields to variability in sediment supply at three SBDs along the Colorado River in Grand Canyon, Arizona, USA during the 11 years between 2002 and 2013 when several river floods rebuilt some river sandbars and channel margin deposits that serve as sediment source areas for the SBDs. We demonstrate that resupply of fluvially sourced aeolian sediment occurred at one of the SBDs, but not at the other two, and attribute this differential response to site-specific variability in geomorphology, wind, and sediment source areas. The approach we present is applied in a companion study to shorter time periods with high-resolution topographic data that bracket individual floods in order to infer the resupply of fluvially sourced aeolian sediment to SBDs by managed river flows. Such an applied methodology could also be useful for measuring sediment connectivity and anthropogenic alterations of connectivity in other coupled fluvial-aeolian environments.

The response of source-bordering aeolian dunefields to sediment-supply changes 1: Effects of wind variability and river-valley morphodynamics

NASA Astrophysics Data System (ADS)

Sankey, Joel B.; Kasprak, Alan; Caster, Joshua; East, Amy E.; Fairley, Helen C.

2018-06-01

Source-bordering dunefields (SBDs), which are primarily built and maintained with river-derived sediment, are found in many large river valleys and are currently impacted by changes in sediment supply due to climate change, land use changes, and river regulation. Despite their importance, a physically based, applied approach for quantifying the response of SBDs to changes in sediment supply does not exist. To address this knowledge gap, here we develop an approach for quantifying the geomorphic responses to sediment-supply alteration based on the interpretation of dunefield morphodynamics from geomorphic change detection and wind characteristics. We use the approach to test hypotheses about the response of individual dunefields to variability in sediment supply at three SBDs along the Colorado River in Grand Canyon, Arizona, USA during the 11 years between 2002 and 2013 when several river floods rebuilt some river sandbars and channel margin deposits that serve as sediment source areas for the SBDs. We demonstrate that resupply of fluvially sourced aeolian sediment occurred at one of the SBDs, but not at the other two, and attribute this differential response to site-specific variability in geomorphology, wind, and sediment source areas. The approach we present is applied in a companion study to shorter time periods with high-resolution topographic data that bracket individual floods in order to infer the resupply of fluvially sourced aeolian sediment to SBDs by managed river flows. Such an applied methodology could also be useful for measuring sediment connectivity and anthropogenic alterations of connectivity in other coupled fluvial-aeolian environments.

Verifying mapping, monitoring and modeling of fine sediment pollution sources in West Maui, Hawai'i, USA

NASA Astrophysics Data System (ADS)

Cerovski-Darriau, C.; Stock, J. D.

2017-12-01

Coral reef ecosystems, and the fishing and tourism industries they support, depend on clean waters. Fine sediment pollution from nearshore watersheds threatens these enterprises in West Maui, Hawai'i. To effectively mitigate sediment pollution, we first have to know where the sediment is coming from, and how fast it erodes. In West Maui, we know that nearshore sediment plumes originate from erosion of fine sand- to silt-sized air fall deposits where they are exposed by grazing, agriculture, or other disturbances. We identified and located these sediment sources by mapping watershed geomorphological processes using field traverses, historic air photos, and modern orthophotos. We estimated bank lowering rates using erosion pins, and other surface erosion rates were extrapolated from data collected elsewhere on the Hawaiian Islands. These measurements and mapping led to a reconnaissance sediment budget which showed that annual loads are dominated by bank erosion of legacy terraces. Field observations during small storms confirm that nearshore sediment plumes are sourced from bank erosion of in-stream, legacy agricultural deposits. To further verify this sediment budget, we used geochemical fingerprinting to uniquely identify each potential source (e.g. stream banks, agricultural fields, roads, other human modified soils, and hillslopes) from the Wahikuli watershed (10 km2) and analyzed the fine fraction using ICP-MS for elemental geochemistry. We propose to apply this the fingerprinting results to nearshore suspended sediment samples taken during storms to identify the proportion of sediment coming from each source. By combining traditional geomorphic mapping, monitoring and geochemistry, we hope to provide a powerful tool to verify the primary source of sediment reaching the nearshore.

Sediment sources in a small agricultural catchment: A composite fingerprinting approach based on the selection of potential sources

NASA Astrophysics Data System (ADS)

Zhou, Huiping; Chang, Weina; Zhang, Longjiang

2016-08-01

Fingerprinting techniques have been widely used as a reasonable and reliable means for investigating sediment sources, especially in relatively large catchments in which there are significant differences in surface materials. However, the discrimination power of fingerprint properties for small catchments, in which the surface materials are relatively homogeneous and human interference is marked, may be affected by fragmentary or confused source information. Using fingerprinting techniques can be difficult, and there is still a need for further studies to verify the effectiveness of such techniques in these small catchments. A composite fingerprinting approach was used in this study to investigate the main sources of sediment output, as well as their relative contributions, from a small catchment (30 km2) with high levels of farming and mining activities. The impact of the selection of different potential sediment sources on the derivation of composite fingerprints and its discrimination power were also investigated by comparing the results from different combinations of potential source types. The initial source types and several samples that could cause confusion were adjusted. These adjustments improved the discrimination power of the composite fingerprints. The results showed that the composite fingerprinting approach used in this study had a discriminatory efficiency of 89.2% for different sediment sources and that the model had a mean goodness of fit of 0.90. Cultivated lands were the main sediment source. The sediment contribution of the studied cultivated lands ranged from 39.9% to 87.8%, with a mean of 76.6%, for multiple deposited sediment samples. The mean contribution of woodlands was 21.7%. Overall, the sediment contribution from mining and road areas was relatively low. The selection of potential sources is an important factor in the application of fingerprinting techniques and warrants more attention in future studies, as is the case with other uncertainty factors.

Downslope transport does not explain higher 230Th inventories in the Panama Basin

NASA Astrophysics Data System (ADS)

Singh, A. K.; Marcantonio, F.; Lyle, M. W.

2009-12-01

Mass accumulation rates (burial fluxes) in the Panama Basin calculated using oxygen isotope age models differ from those calculated using the 230Th normalized flux method. During the Holocene and the last glacial, the 230Th-derived MARs are consistently lower than age-model-derived MARs. Most importantly, using both methods, glacial MARs are always significantly higher than Holocene MARs. The discrepancy in the calculated MARs may be due to deep-ocean sediment redistribution processes, specifically downslope transport of sediments from nearby topographic highs [1]. We test this hypothesis by analyzing sediment from shallower sites throughout the Panama basin (from 712-2870 meters) and, specifically, from the tops of ridges surrounding the basin (e.g., Carnegie and Cocos Ridges). Based on 230Th methodology we determine ridge-top focusing factors (FF) that are as high as, or higher than those in the deeper parts of the basin, as determined by us or others [1]. The excess inventories of 230Th are also proportionally higher during the glacial versus Holocene in all but one of the nine new sites we have analyzed. If the source of the higher-than-predicted inventory of 230Th is topographic highs in the region, one would expect to see a correlation between 230Th and depth. We find no such correlation. Although our data suggest that within-basin topographic highs are not the source of higher 230Th inventories in the region, extrabasinal sources cannot be ruled out. In addition, there is the possibility that MARs can be underestimated using the 230Th method in Panama Basin sediments. [1] Kienast et al. 2007, Paleoceanography 22, 2213.

Heavy metals in the surface sediments of the northern portion of the South China Sea shelf: distribution, contamination, and sources.

PubMed

Xu, Fangjian; Tian, Xu; Yin, Feng; Zhao, Yongfang; Yin, Xuebo

2016-05-01

The concentrations of seven heavy metals (Cr, Ni, Cu, Zn, As, Cd, and Pb) in the surface sediments of the northern portion of the South China Sea (SCS) shelf collected between 2012 and 2014 were measured to assess the potential contamination levels and determine the environmental risks that are associated with heavy metals in the area. The measured concentrations in the sediments were 12.4-72.5 mg kg(-1) for Cr, 4.4-29.2 mg kg(-1) for Ni, 7.1-38.1 mg kg(-1) for Cu, 19.3-92.5 mg kg(-1) for Zn, 1.3-12.1 mg kg(-1) for As, 0.03-0.24 mg kg(-1) for Cd, and 8.5-24.4 mg kg(-1) for Pb. These results indicate that the heavy metal concentrations in the sediments generally meet the China Marine Sediment Quality criteria and suggest that the overall sediment quality of the northern portion of the SCS shelf has not been significantly impacted by heavy metal pollution. However, the enrichment factor (EF) and geoaccumulation index (I geo) clearly show that elevated concentrations of Cd occur in the region. A Pearson's correlation analysis was performed, and the results suggest that Cr, Ni, Cu, and Zn have a natural origin; Cd is primarily sourced from anthropogenic activities, with partial lithogenic components, and As and Pb may be affected by factors such as varying input sources or pathways (i.e., coal burning activities and aerosol precipitation). Heavy metal contamination mostly occurred to the east of Hainan Island, mainly because of the rapid economic and social developments in the Hainan Island. The results of this study will be useful for marine environment managers for the remediation of pollution sources.

Chemical fractionation of Cu and Zn in stormwater, roadway dust and stormwater pond sediments

USGS Publications Warehouse

Camponelli, Kimberly M.; Lev, Steven M.; Snodgrass, Joel W.; Landa, Edward R.; Casey, Ryan E.

2010-01-01

This study evaluated the chemical fractionation of Cu and Zn from source to deposition in a stormwater system. Cu and Zn concentrations and chemical fractionation were determined for roadway dust, roadway runoff and pond sediments. Stormwater Cu and Zn concentrations were used to generate cumulative frequency distributions to characterize potential exposure to pond-dwelling organisms. Dissolved stormwater Zn exceeded USEPA acute and chronic water quality criteria in approximately 20% of storm samples and 20% of the storm duration sampled. Dissolved Cu exceeded the previously published chronic criterion in 75% of storm samples and duration and exceeded the acute criterion in 45% of samples and duration. The majority of sediment Cu (92–98%) occurred in the most recalcitrant phase, suggesting low bioavailability; Zn was substantially more available (39–62% recalcitrant). Most sediment concentrations for Cu and Zn exceeded published threshold effect concentrations and Zn often exceeded probable effect concentrations in surface sediments.

Environmental assessment of aromatic hydrocarbons-contaminated sediments of the Mexican Salina Cuz Bay.

PubMed

González-Macías, C; Schifter, I; Lluch-Cota, D B; Méndez-Rodríguez, L; Hernández-Vázquez, S

2007-10-01

Concentrations of total aromatic hydrocarbons and extractable organic matter in the water column and sediment were determined in samples collected in the course of the last 20 years from the Salina Cruz Harbor, México, to assess the degree of organic contamination. In sediments, organic compounds accumulate in shallow areas mostly associated with extractable organic matter and fine fractions. Calculated geocumulation index and enrichment factors suggest that contamination could be derived from anthropogenic activities attributed to harbor and ship scrapping activities, as well as transboundary source. Concentration of total aromatic hydrocarbons (as chrysene equivalents) ranged from 0.01 to 534 microg l(-1) in water, and from 0.10 to 2,160 microg g(-1) in sediments. Total aromatic concentration of 5 microg g(-1) is proposed as background concentration.

Heavy metal contamination from historic mining in upland soil and estuarine sediments of Egypt Bay, Maine, USA

NASA Astrophysics Data System (ADS)

Osher, L. J.; Leclerc, L.; Wiersma, G. B.; Hess, C. T.; Guiseppe, V. E.

2006-10-01

Concentrations of Cd, Cu, Pb and Zn in sediments of Egypt Bay in Hancock County, Maine, are elevated above background levels. The source of the contamination is Cu mining that occurred in the uplands adjacent to Egypt Stream between 1877 and 1885. Egypt Stream is a tributary to Egypt Bay. Egypt Bay is part of the Taunton Bay estuary system. The Hagan Mine was one of the mines extracting metals from the sulfide deposits in Downeast Maine north of Penobscot Bay. Metal concentrations were determined using ICP-AES after sample digestion with nitric acid. Soil collected from the coarse textured mine tailings pile contained elevated concentrations of Cd, Cu, Pb and Zn, but the majority of the surface soils at the Hagan Mine site were not contaminated. Estuary sediments from the surface to 100 cm depth were collected in four locations within Egypt Bay. Below 40 cm, metal concentrations in sediments were similar to those in uncontaminated upland soils. Metal concentrations in the estuary sediments between the surface and 26 cm were above background levels. According to 210Pb dating, the sediment at 26-34 cm depth was likely to have been deposited at the time the historic mines were in operation. Concentrations of Cd, Cu, Pb, and Zn in sediment from the 32-34 cm depth interval are similar to concentrations in the upland soil sample from the mine tailings pile. Elevated Pb concentrations in sediments from the surface to 24 cm are from atmospheric Pb deposition from anthropogenic sources. Sediment in the top 10 cm of the estuary has been mixed both by the polychaete worm Nereis virens and by those harvesting the worms for sale as fish bait.

Saco Bay, Maine: Sediment Budget for Late Twentieth Century to Present

DTIC Science & Technology

2016-02-01

determined that sediment flux was variable, depending on bathymetry and input wave conditions. Despite these variations in conditions, there is no obvious...DETAILS, SACO BAY, MAINE V3. Last update: 11 September 2014 Units are yd3/year. Source1 = bluffs, river influx, wind . Sink1 = wind -blown loss or...Beach05 (B05), Pine Point QSource1 1,600 Wind transport (from Kelley et al. 2005). DeltaV 1,600 Dune accumulation 1859–1991 (from Kelley et al. 2005

Isotopic Constraints on the Sources and Associations of Organic Compounds in Marine Sediments

DTIC Science & Technology

2006-02-01

international standard for 14C dating, Standard Reference Material 4990B " Oxalic Acid". Routine precision for 813 C and Aa4 C measurements are --0.1 and...determined by their depositional settings. Group ’a’ includes organic-rich marine sediments from Guaymas basin (GB), a hydrothermal system with active...is the per mille (%0o) deviation from the international standard for 14C dating, Standard Reference Material 4990B " Oxalic Acid". Precision for V𔃽 C

A new approach of using multiple composite fingerprints to apportion sediment sources

USDA-ARS?s Scientific Manuscript database

Sediment source fingerprinting provides an essential means for estimating sediment source contributions, which are needed not only for soil conservation planning but also for erosion model evaluation and refinement. A single optimum composite fingerprint has been widely used in the literature to es...

Neutral carbohydrate geochemistry of particulate material in the central equatorial Pacific

NASA Astrophysics Data System (ADS)

Hernes, Peter J.; Hedges, John I.; Peterson, Michael L.; Wakeham, Stuart G.; Lee, Cindy

Neutral carbohydrate compositions were determined for particulate samples from plankton net tows, shallow floating sediment traps, mid-depth and deep moored sediment traps, and sediment cores collected along a north-south transect in the central equatorial Pacific Ocean during the U.S. JGOFS EqPac program. Total neutral carbohydrate depth profiles and patterns along the transect follow essentially the same trends as bulk and organic carbon (OC) fluxes—attenuating with depth, high near the equator and decreasing poleward. OC-normalized total aldose (TCH 2,O) yields along the transect and with depth do not show any consitent patterns. Relative to a planktonic source, neutral carbohydrate compositions in sediment trap and sediment core samples reflect preferential loss of ribose and storage carbohydrates rich in glucose, and preferential preservation of structural carbohydrates rich in rhamnose, xylose, fucose, and mannose. There is also evidence for an intermediately labile component rich in galactose. It appears that compositional signatures of neutral carbohydrates in sediments are more dependent upon their planktonic source than on any particular diagenetic pathway. Relative to other types of organic matter, neutral carbohydrates are better preserved in calcareous oozes from 12°S to 5°N than in red clays at 9°N based on OC-normalized TCH 2O yields, due to either differing sources or sorption characteristics. Weight per cent glucose generally decreases with increased degradation of organic material in the central equatorial Pacific region. Based on weight per cent glucose, comparisons of samples between Survey I (El Niõn) and Survey II (non-El Niño) indicate that during Survey I, organic material in the epipelagic zone in the northern hemisphere may have undergone more degradation than organic material in the southern hemisphere.

Hydrogen isotope fractionation in leaf waxes in the Alaskan Arctic tundra

NASA Astrophysics Data System (ADS)

Daniels, William C.; Russell, James M.; Giblin, Anne E.; Welker, Jeffrey M.; Klein, Eric S.; Huang, Yongsong

2017-09-01

Leaf wax hydrogen isotopes (δDwax) are increasingly utilized in terrestrial paleoclimate research. Applications of this proxy must be grounded by studies of the modern controls on δDwax, including the ecophysiological controls on isotope fractionation at both the plant and landscape scales. Several calibration studies suggest a considerably smaller apparent fractionation between source water and waxes (εapp) at high latitudes relative to temperate or tropical locations, with major implications for paleoclimatic interpretations of sedimentary δDwax. Here we investigate apparent fractionation in the Arctic by tracing the isotopic composition of leaf waxes from production in modern plants to deposition in lake sediments using isotopic observations of precipitation, soil and plant waters, living leaf waxes, and waxes in sediment traps in the Brooks Range foothills of northern Alaska. We also analyze a lake surface sediment transect to compare present-day vegetation assemblages to εapp at the watershed scale. Source water and εapp were determined for live specimens of Eriophorum vaginatum (cottongrass) and Betula nana (dwarf birch), two dominant tundra plants in the Brooks Range foothills. The δD of these plants' xylem water closely tracks that of surface soil water, and reflects a summer-biased precipitation source. Leaf water is enriched by 23 ± 15‰ relative to xylem water for E. vaginatum and by 41 ± 19‰ for B. nana. Evapotranspiration modeling indicates that this leaf water enrichment is consistent with the evaporative enrichment expected under the climate conditions of northern Alaska, and that 24-h photosynthesis does not cause excessive leaf water isotope enrichment. The εapp determined for our study species average -89 ± 14‰ and -106 ± 16‰ for B. nana n-alkanes and n-acids, respectively, and -182 ± 10‰ and -154 ± 26‰ for E. vaginatum n-alkanes and n-acids, which are similar to the εapp of related species in temperate and tropical regions, indicating that apparent fractionation is similar in Arctic relative to other regions, and there is no reduced fractionation in the Arctic. Sediment trap data suggest that waxes are primarily transported into lakes from local (watershed-scale) sources by overland flow during the spring freshet, and so δDwax within lakes depends on watershed-scale differences in water isotope compositions and in plant ecophysiology. As such, the large difference between our study species suggests that the relative abundance of graminoids and shrubs is potentially an important control on δDwax in lake sediments. These inferences are supported by δDwax data from surface sediments of 24 lakes where εapp, relative to δDxylem, averages -128 ± 13‰ and -130 ± 8‰ for n-acids and n-alkanes, respectively, and co-varies with vegetation type across watersheds. These new determinations of plant source water seasonality and εapp for the Arctic will improve the δDwax paleoclimate proxy at high latitudes.

Transverse Aeolian Ridges on Mars: Sediment sources, volumes, and ages.

NASA Astrophysics Data System (ADS)

Berman, D. C.; Balme, M. R.

2014-12-01

Transverse Aeolian Ridges (TARs) are aeolian bedforms that are morphologically and dimensionally distinct from Large Dark Dune (LDD) fields, being generally brighter than, or of similar albedo to, the surrounding terrain. These features are significantly smaller than the LDDs, appear to form normal to local winds, and tend to have simple, transverse, ripple-like morphologies. Whether these small martian bedforms represent large granule ripples, small transverse dunes, or something else entirely is currently under debate. The spatial distribution of TARs provides important information about where on Mars aeolian sediments are concentrated, and determining their volume can help us constrain the sediment transport regime on Mars. Also, if we can determine if TARs were active only in the past, or whether TARs are mobile under today's wind conditions, then we can begin to assess when and where TARs are/were active over Mars' recent geological history. Thus TARs have the potential for being indicators/records of climate change on Mars. In this work we build on previous work [1,2] and focus on the local/regional scale. We have identified six regional study areas, each 5° by 5°, to investigate the behavior of TARs in detail; one in the northern hemisphere, three in the equatorial band, and two in the southern hemisphere. We have systematically mapped TAR and LDD deposits in each study area to constrain sediment transport pathways and identify sediment sources. In general, TAR sediments appear to be tied to local sources such as LDDs or layered terrains. HiRISE DTMs were utilized to measure TAR heights, widths, wavelengths, and lengths to calculate sediment volumes and estimate volumes over entire study areas based on mapping. Crater count analyses on contiguous TAR fields in the equatorial regions, where the bedforms appear more lithified, reveal ages of several million years. Mid-latitude TAR fields do not show any superposed craters, suggesting much younger deposits. References: [1] Balme, M.R., D.C. Berman, M.C. Bourke, and J.R. Zimbelman, Transverse Aeolian Ridges (TARs) on Mars, Geomorphology, 101, 703-720, 2008. [2] Berman, D.C., M.R. Balme, S. Rafkin, and J.R. Zimbelman, Transverse Aeolian Ridges (TARs) on Mars II: Distributions, orientations, and ages, Icarus 213, 116-130, 2011

Recent paleoseismicity record in Prince William Sound, Alaska, USA

NASA Astrophysics Data System (ADS)

Kuehl, Steven A.; Miller, Eric J.; Marshall, Nicole R.; Dellapenna, Timothy M.

2017-12-01

Sedimentological and geochemical investigation of sediment cores collected in the deep (>400 m) central basin of Prince William Sound, along with geochemical fingerprinting of sediment source areas, are used to identify earthquake-generated sediment gravity flows. Prince William Sound receives sediment from two distinct sources: from offshore (primarily Copper River) through Hinchinbrook Inlet, and from sources within the Sound (primarily Columbia Glacier). These sources are found to have diagnostic elemental ratios indicative of provenance; Copper River Basin sediments were significantly higher in Sr/Pb and Cu/Pb, whereas Prince William Sound sediments were significantly higher in K/Ca and Rb/Sr. Within the past century, sediment gravity flows deposited within the deep central channel of Prince William Sound have robust geochemical (provenance) signatures that can be correlated with known moderate to large earthquakes in the region. Given the thick Holocene sequence in the Sound ( 200 m) and correspondingly high sedimentation rates (>1 cm year-1), this relationship suggests that sediments within the central basin of Prince William Sound may contain an extraordinary high-resolution record of paleoseismicity in the region.

Targeting sediment management strategies using sediment quantification and fingerprinting methods

NASA Astrophysics Data System (ADS)

Sherriff, Sophie; Rowan, John; Fenton, Owen; Jordan, Phil; hUallacháin, Daire Ó.

2016-04-01

Cost-effective sediment management is required to reduce excessive delivery of fine sediment due to intensive land uses such as agriculture, resulting in the degradation of aquatic ecosystems. Prioritising measures to mitigate dominant sediment sources is, however, challenging, as sediment loss risk is spatially and temporally variable between and within catchments. Fluctuations in sediment supply from potential sources result from variations in land uses resulting in increased erodibility where ground cover is low (e.g., cultivated, poached and compacted soils), and physical catchment characteristics controlling hydrological connectivity and transport pathways (surface and/or sub-surface). Sediment fingerprinting is an evidence-based management tool to identify sources of in-stream sediments at the catchment scale. Potential sediment sources are related to a river sediment sample, comprising a mixture of source sediments, using natural physico-chemical characteristics (or 'tracers'), and contributions are statistically un-mixed. Suspended sediment data were collected over two years at the outlet of three intensive agricultural catchments (approximately 10 km2) in Ireland. Dominant catchment characteristics were grassland on poorly-drained soils, arable on well-drained soils and arable on moderately-drained soils. High-resolution (10-min) calibrated turbidity-based suspended sediment and discharge data were combined to quantify yield. In-stream sediment samples (for fingerprinting analysis) were collected at six to twelve week intervals, using time-integrated sediment samplers. Potential sources, including stream channel banks, ditches, arable and grassland field topsoils, damaged road verges and tracks were sampled, oven-dried (<40oC) and sieved (125 microns). Soil and sediment samples were analysed for mineral magnetics, geochemistry and radionuclide tracers, particle size distribution and soil organic carbon. Tracer data were corrected to account for particle size and organic matter selectivity processes. Contributions from potential sources type groups (channel - ditches and stream banks, roads - road verges and tracks, fields - grassland and arable topsoils) were statistically un-mixed using FR2000, an uncertainty-inclusive algorithm, and combined with sediment yield data. Results showed sediment contributions from channel, field and road groups were 70%, 25% and 5% in the poorly-drained catchment, 59%, 22% and 19% in the well-drained catchment, and 17%, 74% and 9% in the moderately-drained catchment. Higher channel contributions in the poorly-drained catchment were attributed to bank erosion accelerated by the rapid diversion of surface runoff into channels, facilitated by surface and sub-surface artificial drainage networks, and bank seepage from lateral pressure gradients due to confined groundwater. Despite the greatest proportion of arable soils in the well-drained catchment, this source was frequently hydrologically disconnected as well-drained soils largely infiltrated rainfall and prevented surface soil erosion. Periods of high and intense rainfall were associated with greater proportions of field losses in the well-drained catchment likely due to infiltration exceeding the saturated hydraulic conductivity of soils and establishment of surface hydrological connectivity. Losses from field topsoils dominated in the moderately-drained catchment as antecedent soil wetness maintained surface flow pathways and coincided with low groundcover on arable soils. For cost-effective management of sediment pressures to aquatic ecosystems, catchment specific variations in sediment sources must be considered.

The geochemical characteristics and sedimentary environment of abyss and hadal sediments of Yap-trench

NASA Astrophysics Data System (ADS)

Huang, Y.; Wang, M.; Sun, C.; Yang, G.; Ding, H.

2017-12-01

Based on ICP-ES analysis, concentrations of 6 constant elements and 9 trace elements in five sediment columnar samples collected from Yap-trench by the Jiaolong Submersiblein June, 2016, were determined. According to the distribution of elements, the sources of sediment and the implications on sedimentary environment were investigated through the correlation of elements and the ratios between special elements. The results showed that the carbonate compensation depthwas between 4500m and 5000m, and the depth of 5000m should be an ideal condition for the formation of iron and manganese nodules. Based on the ratios of Fe/Al and Ti/Al, and the correlation of elements, we inferred that Yap-trench sediments were mainly derived from biogenic, terrestrial, volcanic and autogenic source. The values of Ni/Co and V/Cr indicated that the depositional environment belongs to the oxidative environment and might have inflow of the Antarctic bottom oxygen-rich water. The high content of Ca in the 371-Yap-S02 station below 4cm indicated that this area should be no large-scale volcanic eruption, and volcanic material in the sediment may come from the Mariana volcanic arc. The Caroline ridge located in the east of Yap-trench keep sinking due to plate subduction.

Deep-towed high resolution seismic imaging II: Determination of P-wave velocity distribution

NASA Astrophysics Data System (ADS)

Marsset, B.; Ker, S.; Thomas, Y.; Colin, F.

2018-02-01

The acquisition of high resolution seismic data in deep waters requires the development of deep towed seismic sources and receivers able to deal with the high hydrostatic pressure environment. The low frequency piezoelectric transducer of the SYSIF (SYstème Sismique Fond) deep towed seismic device comply with the former requirement taking advantage of the coupling of a mechanical resonance (Janus driver) and a fluid resonance (Helmholtz cavity) to produce a large frequency bandwidth acoustic signal (220-1050 Hz). The ability to perform deep towed multichannel seismic imaging with SYSIF was demonstrated in 2014, yet, the ability to determine P-wave velocity distribution wasn't achieved. P-wave velocity analysis relies on the ratio between the source-receiver offset range and the depth of the seismic reflectors, thus towing the seismic source and receivers closer to the sea bed will provide a better geometry for P-wave velocity determination. Yet, technical issues, related to the acoustic source directivity, arise for this approach in the particular framework of piezoelectric sources. A signal processing sequence is therefore added to the initial processing flow. Data acquisition took place during the GHASS (Gas Hydrates, fluid Activities and Sediment deformations in the western Black Sea) cruise in the Romanian waters of the Black Sea. The results of the imaging processing are presented for two seismic data sets acquired over gas hydrates and gas bearing sediments. The improvement in the final seismic resolution demonstrates the validity of the velocity model.

Mineralogy, geochemistry, and radiocarbon ages of deep sea sediments from the Gulf of Mexico, Mexico

NASA Astrophysics Data System (ADS)

Armstrong-Altrin, John S.; Machain-Castillo, María Luisa

2016-11-01

The mineralogy, geochemistry, and radiocarbon ages of two sediment cores (GMX1 and GMX2) collected from the deep sea area of the Southwestern Gulf of Mexico (∼876-1752 m water depth) were studied to infer the sedimentation rate, provenance, heavy metal contamination, and depositional environment. The sediments are dominated by silt and clay fractions. The mineralogy determined by X-Ray diffractometry for the sediment cores reveals that montmorillonite and muscovite are the dominant clay minerals. The sections between 100 and 210 cm of the sediment cores GMX1 and GMX2, respectively, are characterized by the G. menardii group and G. Inflata planktonic foraminiferal species, which represent the Holocene and Pleistocene, respectively. The radiocarbon-age measurements of mixed planktonic foraminifera varied from ∼268 to 45,738 cal. years B.P and ∼104 to 25,705 cal. years B.P, for the sediment cores GMX1 and GMX2, respectively. The variation in age between the two sediment cores is due to a change in sediment accumulation rate, which was lowest at the location GMX1 (0.006 cm/yr) and highest at the location GMX2 (0.017 cm/yr). The chemical index of alteration (CIA), chemical index of weathering (CIW), and index of chemical maturity (ICV) values indicated a moderate intensity of weathering in the source area. The total rare earth element concentrations (∑REE) in the cores GMX1 and GMX2 vary from ∼94 to 171 and ∼78 to 151, respectively. The North American Shale Composite (NASC) normalized REE patterns showed flat low REE (LREE), heavy REE (HREE) depletion with low negative to positive Eu anomalies, which suggested that the sediments were likely derived from intermediate source rocks. The enrichment factor of heavy metals indicated that the Cd and Zn concentrations in the sediment cores were impacted by an anthropogenic source. The redox-proxy trace element ratios such as V/Cr, Ni/Co, Cu/Zn, (Cu + Mo)/Zn, and Ce/Ce* indicated that the sediments were deposited under an oxic depositional environment. The similarity in major element concentrations, REE content, and the NASC normalised REE patterns between the cores GMX1 and GMX2 revealed that the provenance of sediments remained relatively uniform or constant during deposition for ∼4.5 Ma. The major and trace element based multidimensional discrimination diagrams showed a rift setting for the core sediments, which is consistent with the geology of the Gulf of Mexico.

An Integrated Forensics Approach To Fingerprint PCB Sources In Sediments Using RSC And ACF

EPA Science Inventory

Determing the original source of contamination to a heterogeneous matrix matrix such as sediment is a requirement for both clean-up and compliance programs. Identifying the source of sediment contaminants in industrial settings is a pre-requisite to implementing any proposed se...

Analyzing the contribution of climate change to long-term variations in sediment nitrogen sources for reservoirs/lakes.

PubMed

Xia, Xinghui; Wu, Qiong; Zhu, Baotong; Zhao, Pujun; Zhang, Shangwei; Yang, Lingyan

2015-08-01

We applied a mixing model based on stable isotopic δ(13)C, δ(15)N, and C:N ratios to estimate the contributions of multiple sources to sediment nitrogen. We also developed a conceptual model describing and analyzing the impacts of climate change on nitrogen enrichment. These two models were conducted in Miyun Reservoir to analyze the contribution of climate change to the variations in sediment nitrogen sources based on two (210)Pb and (137)Cs dated sediment cores. The results showed that during the past 50years, average contributions of soil and fertilizer, submerged macrophytes, N2-fixing phytoplankton, and non-N2-fixing phytoplankton were 40.7%, 40.3%, 11.8%, and 7.2%, respectively. In addition, total nitrogen (TN) contents in sediment showed significant increasing trends from 1960 to 2010, and sediment nitrogen of both submerged macrophytes and phytoplankton sources exhibited significant increasing trends during the past 50years. In contrast, soil and fertilizer sources showed a significant decreasing trend from 1990 to 2010. According to the changing trend of N2-fixing phytoplankton, changes of temperature and sunshine duration accounted for at least 43% of the trend in the sediment nitrogen enrichment over the past 50years. Regression analysis of the climatic factors on nitrogen sources showed that the contributions of precipitation, temperature, and sunshine duration to the variations in sediment nitrogen sources ranged from 18.5% to 60.3%. The study demonstrates that the mixing model provides a robust method for calculating the contribution of multiple nitrogen sources in sediment, and this study also suggests that N2-fixing phytoplankton could be regarded as an important response factor for assessing the impacts of climate change on nitrogen enrichment. Copyright © 2015 Elsevier B.V. All rights reserved.

A preliminary assessment of the spatial sources of contemporary suspended sediment in the Ohio River basin, United States, using water quality data from the NASQAN programme in a source tracing procedure

USGS Publications Warehouse

Zhang, Y.-S.; Collins, A.L.; Horowitz, A.J.

2012-01-01

Reliable information on catchment scale suspended sediment sources is required to inform the design of management strategies for helping abate the numerous environmental issues associated with enhanced sediment mobilization and off-site loadings. Since sediment fingerprinting techniques avoid many of the logistical constraints associated with using more traditional indirect measurement methods at catchment scale, such approaches have been increasingly reported in the international literature and typically use data sets collected specifically for sediment source apportionment purposes. There remains scope for investigating the potential for using geochemical data sets assembled by routine monitoring programmes to fingerprint sediment provenance. In the United States, routine water quality samples are collected as part of the US Geological Survey's revised National Stream Quality Accounting Network programme. Accordingly, the geochemistry data generated from these samples over a 10-year period (1996-2006) were used as the basis for a fingerprinting exercise to assess the key tributary sub-catchment spatial sources of contemporary suspended sediment transported by the Ohio River. Uncertainty associated with the spatial source estimates was quantified using a Monte Carlo approach in conjunction with mass balance modelling. Relative frequency weighted means were used as an alternative way of summarizing the spatial source contributions, thereby avoiding the need to use confidence limits. The results should be interpreted in the context of the routine, but infrequent nature, of the suspended sediment samples used to assemble geochemistry as a basis for the sourcing exercise. Nonetheless, the study demonstrates how routine monitoring samples can be used to provide some preliminary information on sediment provenance in large drainage basins. ?? 2011 John Wiley & Sons, Ltd.

Fluvial sediment fingerprinting: literature review and annotated bibliography

USGS Publications Warehouse

Williamson, Joyce E.; Haj, Adel E.; Stamm, John F.; Valder, Joshua F.; Prautzch, Vicki L.

2014-01-01

The U.S. Geological Survey has evaluated and adopted various field methods for collecting real-time sediment and nutrient data. These methods have proven to be valuable representations of sediment and nutrient concentrations and loads but are not able to accurately identify specific source areas. Recently, more advanced data collection and analysis techniques have been evaluated that show promise in identifying specific source areas. Application of field methods could include studies of sources of fluvial sediment, otherwise referred to as sediment “fingerprinting.” The identification of sediment is important, in part, because knowing the primary sediment source areas in watersheds ensures that best management practices are incorporated in areas that maximize reductions in sediment loadings. This report provides a literature review and annotated bibliography of existing methodologies applied in the field of fluvial sediment fingerprinting. This literature review provides a bibliography of publications where sediment fingerprinting methods have been used; however, this report is not assumed to provide an exhaustive listing. Selected publications were categorized by methodology with some additional summary information. The information contained in the summary may help researchers select methods better suited to their particular study or study area, and identify methods in need of more testing and application.

Evaluation of the organic matter sources using the δ13C composition of individual n-alkanes in sediments from Brazilian estuarine systems by GC/C/IRMS

NASA Astrophysics Data System (ADS)

Maioli, Otávio Luiz Gusso; de Oliveira, Cristiane Rossi; Dal Sasso, Marco Aurélio; Madureira, Luiz Augusto dos Santos; Azevedo, Débora de Almeida; de Aquino Neto, Francisco Radler

2012-12-01

The δ13C composition of individual n-alkanes (from C16 to C34) was measured from surface sediments of five Brazilian estuarine systems affected by different organic matter sources, such as harbor area, industries, urban centers and sugar cane crops, in order to determine the origins of the organic matter. The aliphatic hydrocarbon fraction was analyzed by gas chromatography-combustion-isotope ratio mass spectrometry (GC/C/IRMS). The levels of n-alkanes in the studied areas ranged from 0.34 to 18.14 μg kg-1, being relatively low in comparison to high polluted environments. The Carbon Preference Index (CPI) calculated in the C23-C34 range indicates that n-alkanes are mainly inherited from cuticular waxes of higher plants. The δ13C composition of all n-alkanes detected in the sediment samples ranged from -39.6 to -18.3‰ showing different sources for the studied estuarine systems. Through Principal Component Analysis (PCA) it was possible to verify the petrogenic influence in the n-alkane sources, especially in the Paraíba do Sul sediment samples. Differences up to 15‰ of the δ13C values between n-alkanes of odd and even carbon number (C26 and C27) also indicated mixture of petrogenic and biogenic sources in Paraíba do Sul River. High (less negative) δ13C n-alkane values of odd carbon number were obtained from two sampling sites located close to an ethanol plant, indicating residues discharge of sugar cane (C4 plant). Influence of C3 plants that are the main components of dense ombrophile forest was observed in the Itajaí-Açu sediments by the decrease of δ13C (about 10‰ compared to the Paraíba do Sul River δ13C).

Quantifying sediment source contributions in coastal catchments impacted by the Fukushima nuclear accident with carbon and nitrogen elemental concentrations and stable isotope ratios

NASA Astrophysics Data System (ADS)

Laceby, J. Patrick; Huon Huon, Sylvain; Onda, Yuichi; Evrard, Olivier

2016-04-01

The Fukushima Dai-ichi Nuclear Power Plant accidental release of radioactive contaminants resulted in the significant fallout of radiocesium over several coastal catchments in the Fukushima Prefecture. Radiocesium, considered to be the greatest risk to the short and long term health of the local community, is rapidly bound to fine soil particles and thus is mobilized and transported during soil erosion and runoff processes. As there has been a broad-scale decontamination of rice paddy fields and rural residential areas in the contaminated region, one important long term question is whether there is, or may be, a downstream transfer of radiocesium from forests that covered over 65% of the most contaminated region. Accordingly, carbon and nitrogen elemental concentrations and stable isotope ratios are used to determine the relative contributions of forests and rice paddies to transported sediment in three contaminated coastal catchments. Samples were taken from the three main identified sources: cultivated soils (rice paddies and fields, n=30), forest soils (n=45), and subsoils (channel bank and decontaminated soils, n = 25). Lag deposit sediment samples were obtained from five sampling campaigns that targeted the main hydrological events from October 2011 to October 2014. In total, 86 samples of deposited sediment were analyzed for particulate organic matter elemental concentrations and isotope ratios, 24 from the Mano catchment, 44 from the Niida catchment, and 18 from the Ota catchment. Mann-Whitney U-tests were used to examine the source discrimination potential of this tracing suite and select the appropriate tracers for modelling. The discriminant tracers were modelled with a concentration-dependent distribution mixing model. Preliminary results indicate that cultivated sources (predominantly rice paddies) contribute disproportionately more sediment per unit area than forested regions in these contaminated catchments. Future research will examine if there are areas in particular where forest sources have elevated concentrations and may require some attention in the decontamination and monitoring of potential radiocesium downstream transfers.

Transport and Sources of Suspended Sediment in the Mill Creek Watershed, Johnson County, Northeast Kansas, 2006-07

USGS Publications Warehouse

Lee, Casey J.; Rasmussen, Patrick P.; Ziegler, Andrew C.; Fuller, Christopher C.

2009-01-01

The U.S. Geological Survey, in cooperation with the Johnson County Stormwater Management Program, evaluated suspended-sediment transport and sources in the urbanizing, 57.4 mi2 Mill Creek watershed from February 2006 through June 2007. Sediment transport and sources were assessed spatially by continuous monitoring of streamflow and turbidity as well as sampling of suspended sediment at nine sites in the watershed. Within Mill Creek subwatersheds (2.8-16.9 mi2), sediment loads at sites downstream from increased construction activity were substantially larger (per unit area) than those at sites downstream from mature urban areas or less-developed watersheds. Sediment transport downstream from construction sites primarily was limited by transport capacity (streamflow), whereas availability of sediment supplies primarily influenced transport downstream from mature urban areas. Downstream sampling sites typically had smaller sediment loads (per unit area) than headwater sites, likely because of sediment deposition in larger, less sloping stream channels. Among similarly sized storms, those with increased precipitation intensity transported more sediment at eight of the nine monitoring sites. Storms following periods of increased sediment loading transported less sediment at two of the nine monitoring sites. In addition to monitoring performed in the Mill Creek watershed, sediment loads were computed for the four other largest watersheds (48.6-65.7 mi2) in Johnson County (Blue River, Cedar, Indian, and Kill Creeks) during the study period. In contrast with results from smaller watersheds in Mill Creek, sediment load (per unit area) from the most urbanized watershed in Johnson County (Indian Creek) was more than double that of other large watersheds. Potential sources of this sediment include legacy sediment from earlier urban construction, accelerated stream-channel erosion, or erosion from specific construction sites, such as stream-channel disturbance during bridge renovation. The implication of this finding is that sediment yields from larger watersheds may remain elevated after the majority of urban development is complete. Surface soil, channel-bank, suspended-sediment, and streambed-sediment samples were analyzed for grain size, nutrients, trace elements, and radionuclides in the Mill Creek watershed to characterize suspended sediment between surface or channel-bank sources. Although concentrations and activities of cobalt, nitrogen, selenium, total organic carbon, cesium-137, and excess lead-210 had significant differences between surface and channel-bank samples, biases resulting from urban construction, additional sorption of constituents during sediment transport, and inability to accurately represent erosion from rills and gullies precluded accurate characterization of suspended-sediment source.

Heavy metals in surface sediments of the Jialu River, China: their relations to environmental factors.

PubMed

Fu, Jie; Zhao, Changpo; Luo, Yupeng; Liu, Chunsheng; Kyzas, George Z; Luo, Yin; Zhao, Dongye; An, Shuqing; Zhu, Hailiang

2014-04-15

This work investigated heavy metal pollution in surface sediments of the Jialu River, China. Sediment samples were collected at 19 sites along the river in connection with field surveys and the total concentrations were determined using atomic fluorescence spectrometer and inductively coupled plasma optical emission spectrometer. Sediment samples with higher metal concentrations were collected from the upper reach of the river, while sediments in the middle and lower reaches had relatively lower metal concentrations. Multivariate techniques including Pearson correlation, hierarchical cluster and principal components analysis were used to evaluate the metal sources. The ecological risk associated with the heavy metals in sediments was rated as moderate based on the assessments using methods of consensus-based Sediment Quality Guidelines, Potential Ecological Risk Index and Geo-accumulation Index. The relations between heavy metals and various environmental factors (i.e., chemical properties of sediments, water quality indices and aquatic organism indices) were also studied. Nitrate nitrogen, total nitrogen, and total polycyclic aromatic hydrocarbons concentrations in sediments showed a co-release behavior with heavy metals. Ammonia nitrogen, total nitrogen, orthophosphate, total phosphate and permanganate index in water were found to be related to metal sedimentation. Heavy metals in sediments posed a potential impact on the benthos community. Copyright © 2014 Elsevier B.V. All rights reserved.

Sources of mercury to San Francisco Bay surface sediment as revealed by mercury stable isotopes

USGS Publications Warehouse

Gehrke, Gretchen E.; Blum, Joel D.; Marvin-DePasquale, Mark

2011-01-01

Mercury (Hg) concentrations and isotopic compositions were examined in shallow-water surface sediment (0–2 cm) from San Francisco (SF) Bay to determine the extent to which historic Hg mining contributes to current Hg contamination in SF Bay, and to assess the use of Hg isotopes to trace sources of contamination in estuaries. Inter-tidal and wetland sediment had total Hg (HgT) concentrations ranging from 161 to 1529 ng/g with no simple gradients of spatial variation. In contrast, inter-tidal and wetland sediment displayed a geographic gradient of δ202Hg values, ranging from -0.30% in the southern-most part of SF Bay (draining the New Almaden Hg District) to -0.99% in the northern-most part of SF Bay near the Sacramento–San Joaquin River Delta. Similar to SF Bay inter-tidal sediment, surface sediment from the Alviso Slough channel draining into South SF Bay had a δ202Hg value of -0.29%, while surface sediment from the Cosumnes River and Sacramento–San Joaquin River Delta draining into north SF Bay had lower average δ202Hg values of -0.90% and -0.75%, respectively. This isotopic trend suggests that Hg-contaminated sediment from the New Almaden Hg District mixes with Hg-contaminated sediment from a low δ202Hg source north of SF Bay. Tailings and thermally decomposed ore (calcine) from the New Idria Hg mine in the California Coast Range had average δ202Hg values of -0.37 and +0.03%, respectively, showing that Hg calcination fractionates Hg isotopes resulting in Hg contamination from Hg(II) mine waste products with higher δ202Hg values than metallic Hg(0) produced from Hg mines. Thus, there is evidence for at least two distinct isotopic signals for Hg contamination in SF Bay: Hg associated with calcine waste materials at Hg mines in the Coast Range, such as New Almaden and New Idria; and Hg(0) produced from these mines and used in placer gold mines and/or in other industrial processes in the Sierra Nevada region and SF Bay area.

Biomarkers and isotopic fingerprinting to track sediment origin and connectivity at Baldegg Lake (Switzerland)

NASA Astrophysics Data System (ADS)

Lavrieux, Marlène; Meusburger, Katrin; Birkholz, Axel; Alewell, Christine

2017-04-01

Slope destabilization and associated sediment transfer are among the major causes of aquatic ecosystems and surface water quality impairment. Through land uses and agricultural practices, human activities modify the soil erosive risk and the catchment connectivity, becoming a key factor of sediment dynamics. Hence, restoration and management plans of water bodies can only be efficient if the sediment sources and the proportion attributable to different land uses and agricultural practices are identified. Several sediment fingerprinting methods, based on the geochemical (elemental composition), color, magnetic or isotopic (137Cs) sediment properties, are currently in use. However, these tools are not suitable for a land-use based fingerprinting. New organic geochemical approaches are now developed to discriminate source-soil contributions under different land-uses: The compound-specific stable isotopes (CSSI) technique, based on the biomarkers isotopic signature (here, fatty acids δ13C) variability within the plant species, The analysis of highly specific (i.e. source-family- or even source-species-specific) biomarkers assemblages, which use is until now mainly restricted to palaeoenvironmental reconstructions, and which offer also promising prospects for tracing current sediment origin. The approach was applied to reconstruct the spatio-temporal variability of the main sediment sources of Baldegg Lake (Lucern Canton, Switzerland), which suffers from a substantial eutrophication, despite several restoration attempts during the last 40 years. The sediment supplying areas and the exported volumes were identified using CSSI technique and highly specific biomarkers, coupled to a sediment connectivity model. The sediment origin variability was defined through the analysis of suspended river sediments sampled at high flow conditions (short term), and by the analysis of a lake sediment core covering the last 130 years (long term). The results show the utility of biomarkers and CSSI to track organic sources in contrasted land-use settings. Associated to other fingerprinting methods, this approach could in the future become a decision support tool for catchments management.

A 400-ka tephrochronological framework for Central America from Lake Petén Itzá (Guatemala) sediments

NASA Astrophysics Data System (ADS)

Kutterolf, S.; Schindlbeck, J. C.; Anselmetti, F. S.; Ariztegui, D.; Brenner, M.; Curtis, J.; Schmid, D.; Hodell, D. A.; Mueller, A.; Pérez, L.; Pérez, W.; Schwalb, A.; Frische, M.; Wang, K.-L.

2016-10-01

Lake Petén Itzá, northern Guatemala, lies within a hydrologically closed basin in the south-central area of the Yucatán Peninsula, and was drilled under the auspices of the International Continental Scientific Drilling Program (ICDP) in 2006. At 16°55‧N latitude, the lake is ideally located for study of past climate and environmental conditions in the Neotropical lowlands. Because of its great depth (>160 m), Lake Petén Itzá has a record of continuous sediment accumulation that extends well into the late Pleistocene. A key obstacle to obtaining long climate records from the region is the difficulty of establishing a robust chronology beyond ∼40 ka, the limit of 14C dating. Tephra layers within the Lake Petén Itzá sediments, however, enable development of age/depth relations beyond 40 ka. Ash beds from large-magnitude, Pleistocene-to-Holocene silicic eruptions of caldera volcanoes along the Central American Volcanic Arc (CAVA) were found throughout drill cores collected from Lake Petén Itzá. These ash beds were used to establish a robust chronology extending back 400 ka. We used major- and trace-element glass composition to establish 12 well-constrained correlations between the lacustrine tephra layers in Lake Petén Itzá sediments and dated deposits at the CAVA source volcanoes, and with their marine equivalents in eastern Pacific Ocean sediments. The data also enabled revision of eight previous determinations of erupted volumes and masses, and initial estimates for another four eruptions, as well as the designation of source areas for 14 previously unknown eruptions. The new and revised sedimentation rates for the older sediment successions identify the interglacial of MIS5a between 84 and 72 ka, followed by a stadial between 72 and 59 ka that corresponds to MIS4. We modified the age models for the Lake Petén Itzá sediment sequences, extended the paleoclimate and paleoecological record for this Neotropical region to ∼400 ka, and determined the magnitude and timing of CAVA eruptions.

Assessment of heavy metal contamination in water and sediments of Trepça and Sitnica rivers, Kosovo, using pollution indicators and multivariate cluster analysis.

PubMed

Ferati, Flora; Kerolli-Mustafa, Mihone; Kraja-Ylli, Arjana

2015-06-01

The concentrations of As, Cd, Cr, Co, Cu, Ni, Pb, and Zn in water and sediment samples from Trepça and Sitnica rivers were determined to assess the level of contamination. Six water and sediment samples were collected during the period from April to July 2014. Most of the water samples was found within the European and Kosovo permissible limits. The highest concentration of As, Cd, Pb, and Zn originates primarily from anthropogenic sources such discharge of industrial water from mining flotation and from the mine waste eroded from the river banks. Sediment contamination assessment was carried out using the pollution indicators such as contamination factor (CF), degree of contamination (Cd), modified degree of contamination (mCd), pollution load index (PLI), and geo-accumulation index (Igeo). The CF values for the investigated metals indicated a high contaminated nature of sediments, while the Cd values indicated a very high contamination degree of sediments. The mCd values indicate a high degree of contamination of Sitnica river sediment to ultrahigh degree of contamination of Trepça river sediment. The PLI values ranged from 1.89 to 14.1 which indicate that the heavy metal concentration levels in all investigated sites exceeded the background values and sediment quality guidelines. The average values of Igeo revealed the following ranking of intensity of heavy metal contamination of the Trepça and Sitnica river sediments: Cd > As > Pb > Zn > Cu > Co > Cr > Ni. Cluster analysis suggests that As, Cd, Cr, Co, Cu, Ni, Pb, and Zn are derived from anthropogenic sources, particularly discharges from mining flotation and erosion form waste from a zinc mine plant. In order to protect the sediments from further contamination, the designing of a monitoring network and reducing the anthropogenic discharges are suggested.

Beryllium-7 in vegetation, soil, sediment and runoff on the northern Loess Plateau.

PubMed

Zhang, Fengbao; Yang, Mingyi; Zhang, Jiaqiong

2018-06-01

Beryllium-7 ( 7 Be), as a potentially powerful tracer, was widely used to document soil redistribution and identify sediment sources in recent decades, but the quantity and distribution of 7 Be in vegetation, soil, sediment and runoff on the Loess Plateau have not been fully described. In this study, we measured 7 Be in vegetation, soil, sediment and runoff on the northern Loess Plateau of China and analyzed its variations during the rainy season to assess the potential of the 7 Be method for documenting soil redistribution and identifying sediment sources in a wide range of environments. The results indicated that vegetation, soil, and sediment samples showed higher levels and larger variations of 7 Be activities during the rainy season. The drying plants showed 7 Be mass activity that was more than three times higher than that of living and semi-decomposed plants. 7 Be mass activity in plants and sediment was much higher than in the soil. 7 Be activity in runoff water with a few submicron suspended particles varied slightly and was far lower than in plant, soil and sediment samples. The cumulative precipitation generally determined 7 Be inventory held by plants and soil. An inverse relationship was found between the 7 Be mass activity in sediment and the sediment amount. Globally, approximate 30% of the total 7 Be was held by plants in both the herbaceous and subshrub plots. Approximate 10% of the total 7 Be was lost with sediment from the bare plot. A very small proportion of 7 Be (1.18%-3.20%) was lost with runoff, and the vast majority of 7 Be was retained in the slope soil at the end of rainy season. Vegetation cover and soil erosion significantly affected the spatial distribution and variations of the 7 Be inventory in soil, providing a necessary condition for the development of a 7 Be method to document soil erosion on slopes with vegetation. Copyright © 2018 Elsevier B.V. All rights reserved.

Acoustic measurement of sediment dynamics in the coastal zones using wireless sensor networks

NASA Astrophysics Data System (ADS)

Sudhakaran, A., II; Paramasivam, A.; Seshachalam, S.; A, C.

2014-12-01

Analyzing of the impact of constructive or low energy waves and deconstructive or high energy waves in the ocean are very much significant since they deform the geometry of seashore. The deformation may lead to productive result and also to the end of deteriorate damage. Constructive waves results deposition of sediment which widens the beach where as deconstructive waves results erosion which narrows the beach. Validation of historic sediment transportation and prediction of the direction of movement of seashore is essential to prevent unrecoverable damages by incorporating precautionary measurements to identify the factors that influence sediment transportation if feasible. The objective of this study is to propose a more reliable and energy efficient Information and communication system to model the Coastal Sediment Dynamics. Various factors influencing the sediment drift at a particular region is identified. Consequence of source depth and frequency dependencies of spread pattern in the presence of sediments is modeled. Property of source depth and frequency on sensitivity to values of model parameters are determined. Fundamental physical reasons for these sediment interaction effects are given. Shallow to deep water and internal and external wave model of ocean is obtained intended to get acoustic data assimilation (ADA). Signal processing algorithms are used over the observed data to form a full field acoustic propagation model and construct sound speed profile (SSP). The inversions of data due to uncertainties at various depths are compared. The impact of sediment drift over acoustic data is identified. An energy efficient multipath routing scheme Wireless sensor networks (WSN) is deployed for the well-organized communication of data. The WSN is designed considering increased life time, decreased power consumption, free of threats and attacks. The practical data obtained from the efficient system to model the ocean sediment dynamics are evaluated with remote sensing data and the reasons of deviations and uncertainties are unbiased. The probability of changes and impact of sediment drift over ocean dynamic model over the long running of years is estimated.

Quantifying and identifying the sources of fine sediment input in a typical Mongolian river basin, the Kharaa River case study

NASA Astrophysics Data System (ADS)

Theuring, Phillip

2013-04-01

Mongolia is facing a tremendous change of land-use intensification due to expansions in the agricultural sector, an increase of cattle and livestock and a growth of urban settlements by migration of the rural population to the cities. With most of its area located in a semiarid to arid environment, Mongolia is vulnerable to climatic changes that are expected to lead to higher temperatures and increased evapotranspiration. It is expected that this may lead to unfavorable changes in surface water quality caused by increased nutrients and sediment bound pollutants emissions. Increased fine sediment load is associated with nutrient, heavy metal and pollutant input and therefore affects water quality. Previous studies using radionuclide fallout isotope sediment source fingerprinting investigations identified riverbank erosion as the main source of suspended sediment in the Kharaa River. Erosion susceptibility calculations in combination with suspended sediment observations showed strong seasonal and annual variabilities of sediment input and in-stream transport, and a strong connection of erosional behaviour with land-use.The objective of this study is to quantify the current water quality threats by fine sediment inputs in the 15,000 km2 Kharaa River basin in Northern Mongolia by delineating the sources of the fine sediments and estimating the sediment budget.To identify the spatial distribution of sediment sources within the catchment, more than 1000 samples from the river confluences at the outlet of each sub basin into the main tributary were collected during 5 intensive grab sediment sampling campaigns in 2009-11. The fine sediment fraction (<10μm) has been analysed using geochemical tracer techniques for spatial source identification, based on major elements (e.g. Si, Al, Mg, Fe, Na, K, P) and trace elements (e.g. Ba, Pb, Sr, Zn). The contribution of suspended sediment of each sub basin in the main tributary has been evaluated with help of a mixing model. To asses sediment sources the RUSLE based sediment budget model (SedNet) was employed to estimate surface erosion and sediment budget. The spatial origin of the fine sediment in the catchment could be identified by geochemical fingerprinting techniques. This shows that only some subcatchments contribute considerably to the fine sediment load, especially areas with high grazing intensity and degraded riparian vegetation. The estimated average soil loss in the catchment is 0.2 t×ha-1•a-1. The model results reveal a strong influence of the landuse in the catchment on surface erosion and fine sediment input, which will increase with the intensification of agriculture in the catchment.

Spatial variability of metals in the inter-tidal sediments of the Medway Estuary, Kent, UK.

PubMed

Spencer, Kate L

2002-09-01

Concentrations of major and trace metals were determined in eight sediment cores collected from the inter-tidal zone of the Medway Estuary, Kent, UK. Metal associations and potential sources have been investigated using principal component analysis. These data provide the first detailed geochemical survey of recent sediments in the Medway Estuary. Metal concentrations in surface sediments lie in the mid to lower range for UK estuarine sediments indicating that the Medway receives low but appreciable contaminant inputs. Vertical metal distributions reveal variable redox zonation across the estuary and historically elevated anthropogenic inputs. Peak concentrations of Cu, Pb and Zn can be traced laterally across the estuary and their positions indicate periods of past erosion and/or non-deposition. However, low rates of sediment accumulation do not allow these sub surface maxima to be used as accurate geochemical marker horizons. The salt marshes and inter-tidal mud flats in the Medway Estuary are experiencing erosion, however the erosion of historically contaminated sediments is unlikely to re-release significant amounts of heavy metals to the estuarine system.

Metal release from contaminated coastal sediments under changing pH conditions: Implications for metal mobilization in acidified oceans.

PubMed

Wang, Zaosheng; Wang, Yushao; Zhao, Peihong; Chen, Liuqin; Yan, Changzhou; Yan, Yijun; Chi, Qiaoqiao

2015-12-30

To investigate the impacts and processes of CO2-induced acidification on metal mobilization, laboratory-scale experiments were performed, simulating the scenarios where carbon dioxide was injected into sediment-seawater layers inside non-pressurized chambers. Coastal sediments were sampled from two sites with different contamination levels and subjected to pre-determined pH conditions. Sediment samples and overlying water were collected for metal analysis after 10-days. The results indicated that CO2-induced ocean acidification would provoke increased metal mobilization causing adverse side-effects on water quality. The mobility of metals from sediment to the overlying seawater was correlated with the reduction in pH. Results of sequential extractions of sediments illustrated that exchangeable metal forms were the dominant source of mobile metals. Collectively, our data revealed that high metal concentrations in overlying seawater released from contaminated sediments under acidic conditions may strengthen the existing contamination gradients in Maluan Bay and represent a potential risk to ecosystem health in coastal environments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biomarkers in sedimentary sequences: Indicators to track sediment sources over decadal timescales

NASA Astrophysics Data System (ADS)

Chen, F. X.; Fang, N. F.; Wang, Y. X.; Tong, L. S.; Shi, Z. H.

2017-02-01

Long-term sedimentary sequence research can reveal how human activities and climate interact to affect catchment vegetation, flooding, soil erosion, and sediment sources. In this study, a biomarker sediment fingerprinting technique based on n-alkanes was used to identify long timescale (decadal) sediment sources in a small agricultural catchment. However, the highly saline carbonate environment and bacterial and algal activities elevated the levels of even-chain n-alkanes in the sediments, leading to an obvious even-over-odd predominance of short and middle components (C15-C26). Therefore, by analyzing three odd, long-chain n-alkanes (C27, C29 and C31) in 27 source samples from cropland, gully, and steep slope areas and one sediment sequence (one cultivated horizon and 47 flood couplets), a composite fingerprinting method and genetic algorithm optimization were applied to find the optimal source contributions to sediments. The biomarker fingerprinting results demonstrated that the primary sediment source is gullies, followed by cropland and steep slope areas. The average median source contributions associated with 47 flood couples collected from sediment core samples ranged from 0 ± 0.1% to 91.9 ± 0.4% with an average of 45.0% for gullies, 0 ± 0.4% to 95.6 ± 1.6% with an average of 38.2% for cropland, and 0 ± 2.1% to 60.7 ± 0.4% with an average of 16.8% for steep slopes. However, because farmers were highly motivated to manage the cropland after the 1980s, over half the sediments were derived from cropland in the 1980s. Biomarkers have significant advantages in the identification of sediments derived from different landscape units (e.g., gully and steep slope areas), and n-alkanes have considerable potential in high-resolution research of environmental change based on soil erosion in the hilly Loess Plateau region.

Geology and paleontology of five cores from Screven and Burke counties, eastern Georgia

USGS Publications Warehouse

Edwards, Lucy E.

2001-01-01

Five deep stratigraphic test holes were drilled from 1991 to 1993 in support of multidisciplinary investigations to determine the stratigraphy of Upper Cretaceous and Tertiary sediments of the coastal plain in east-central Georgia. Cored sediment and geological logs from the Millhaven test hole in Screven County and the Girard and Millers Pond test holes in Burke County are the primary sources of lithologic and paleontologic information from this report. Lithologic and paleontologic information from the Thompson Oak and McBean test holes in Burke County supplements the discussion of stratigraphy and sedimentation in the updip part of the study area near the Millers Pond test hole.

Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California

USGS Publications Warehouse

Wong, Florence L.; Phillips, Eleyne L.; Johnson, Samuel Y.; Sliter, Ray W.

2012-01-01

Models of the depth to the base of Last Glacial Maximum and sediment thickness over the base of Last Glacial Maximum for the eastern Santa Barbara Channel are a key part of the maps of shallow subsurface geology and structure for offshore Refugio to Hueneme Canyon, California, in the California State Waters Map Series. A satisfactory interpolation of the two datasets that accounted for regional geologic structure was developed using geographic information systems modeling and graphics software tools. Regional sediment volumes were determined from the model. Source data files suitable for geographic information systems mapping applications are provided.

Source apportionment and distribution of polycyclic aromatic hydrocarbons, risk considerations, and management implications for urban stormwater pond sediments in Minnesota, USA.

PubMed

Crane, Judy L

2014-02-01

High concentrations of polycyclic aromatic hydrocarbons (PAHs) are accumulating in many urban stormwater ponds in Minnesota, resulting in either expensive disposal of the excavated sediment or deferred maintenance by economically challenged municipalities. Fifteen stormwater ponds in the Minneapolis-St. Paul, MN, metropolitan area were studied to determine sources of PAHs to bed sediments through the application of several environmental forensic techniques, including a contaminant mass balance receptor model. The model results were quite robust and indicated that coal tar-based sealant (CT-sealant) particulate washoff and dust sources were the most important sources of PAHs (67.1%), followed by vehicle-related sources (29.5%), and pine wood combustion particles (3.4%). The distribution of 34 parent and alkylated PAHs was also evaluated regarding ancillary measurements of black carbon, total organic carbon, and particle size classes. None of these parameters were significantly different based on major land-use classifications (i.e., residential, commercial, and industrial) for pond watersheds. PAH contamination in three stormwater ponds was high enough to present a risk to benthic invertebrates, whereas nine ponds exceeded human health risk-based benchmarks that would prompt more expensive disposal of dredged sediment. The State of Minnesota has been addressing the broader issue of PAH-contaminated stormwater ponds by encouraging local municipalities to ban CT-sealants (29 in all) and to promote pollution prevention alternatives to businesses and homeowners, such as switching to asphalt-based sealants. A statewide CT-sealant ban was recently enacted. Other local and regional jurisdictions may benefit from using Minnesota's approach where CT-sealants are still used.

Sediment residence times constrained by uranium-series isotopes: A critical appraisal of the comminution approach

NASA Astrophysics Data System (ADS)

Handley, Heather K.; Turner, Simon; Afonso, Juan C.; Dosseto, Anthony; Cohen, Tim

2013-02-01

Quantifying the rates of landscape evolution in response to climate change is inhibited by the difficulty of dating the formation of continental detrital sediments. We present uranium isotope data for Cooper Creek palaeochannel sediments from the Lake Eyre Basin in semi-arid South Australia in order to attempt to determine the formation ages and hence residence times of the sediments. To calculate the amount of recoil loss of 234U, a key input parameter used in the comminution approach, we use two suggested methods (weighted geometric and surface area measurement with an incorporated fractal correction) and typical assumed input parameter values found in the literature. The calculated recoil loss factors and comminution ages are highly dependent on the method of recoil loss factor determination used and the chosen assumptions. To appraise the ramifications of the assumptions inherent in the comminution age approach and determine individual and combined comminution age uncertainties associated to each variable, Monte Carlo simulations were conducted for a synthetic sediment sample. Using a reasonable associated uncertainty for each input factor and including variations in the source rock and measured (234U/238U) ratios, the total combined uncertainty on comminution age in our simulation (for both methods of recoil loss factor estimation) can amount to ±220-280 ka. The modelling shows that small changes in assumed input values translate into large effects on absolute comminution age. To improve the accuracy of the technique and provide meaningful absolute comminution ages, much tighter constraints are required on the assumptions for input factors such as the fraction of α-recoil lost 234Th and the initial (234U/238U) ratio of the source material. In order to be able to directly compare calculated comminution ages produced by different research groups, the standardisation of pre-treatment procedures, recoil loss factor estimation and assumed input parameter values is required. We suggest a set of input parameter values for such a purpose. Additional considerations for calculating comminution ages of sediments deposited within large, semi-arid drainage basins are discussed.

Marine geology of the Near Islands Shelf, Alaska

USGS Publications Warehouse

Scruton, Philip Challacombe

1953-01-01

During the summer of 1950 on the insular shelf surrounding the Near Islands, Alaska, 193 oceanographic stations were occupied from aboard the U. S. Geological Survey vessel EIDER. Bottom character and temperature observations were made at these stations. The composition and size distribution characteristics of the bottom samples have been determined. Components of terrigenous origin are angular to subangular sand and silt and angular to well rounded granules, pebbles, and cobbles, all composed of little-altered fragments of the fine grained insular rocks. Components of marine origin are the skeletons of Foraminifera, diatoms, and sponges and the broken shells of a few species of mollusks and of one echinoid species. A chart, based also on the study of approximately 600 USC&GS bottom notations, was prepared to show the distribution of these components of the sediments. Bed rock is exposed on most of the shelf; where sediment occurs terrigenous components are generally most important near shore, whereas marine components are more important seaward of the islands. Studies of the Foraminifera fauna and the diatom flora (identified by K. E. Lohman) and the few mollusks of quantitative importance show these organisms to be forms characteristic of cold or deep water or occurring in a wide range of temperature conditions. The Foraminifera exhibit depth zonation which seems to be controlled in part by temperature and in part by depth or some other variable which is a function of depth. Sphericity and roundness studies made on pebbles from the shelf, the beaches, and the fluvio-glacial deposits together with shelf topographic features and Foraminifera from sediment deposited before ice wastage was complete suggest the shelf was not subjected to prolonged surf action during the post-glacial rise of sea level. To aid in interpreting the sediments and their distribution several subaerial and marine environmental factors were investigated. Those factors found to be of most importance in determining sediment character and distribution are recent geologic history, nature of terrigenous source material, temperature, topography, rainfall, size of source area, history of the water mass, waves, and currents. The data derived from this study show the importance of climate as an important variable in determining sediment character and distribution in the Near Islands.

Distribution characteristics and sources of trace metals in sediment cores from a trans-boundary watercourse: An example from the Shima River, Pearl River Delta.

PubMed

Gao, Lei; Wang, Zhuowei; Shan, Jiju; Chen, Jianyao; Tang, Changyuan; Yi, Ming; Zhao, Xinfeng

2016-12-01

Metal pollution in sediments from the Shima River, a typical transboundary watercourse in the Pearl River Delta area, was investigated. Sediment cores were collected at eight sites from the upper to the lower reaches crossing Shenzhen, Dongguan and Huizhou cities. Sediment physicochemical properties and the total concentrations of trace metals (V, Cr, Co, Ni, Cu, Zn, As, Cd and Pb) were determined. The results showed that riverine sediment was significantly polluted by Cr (content range: 13.8-469mgkg -1 ), Ni (14.1-257mgkg -1 ), Cu (10.8-630mgkg -1 ), Zn (50.2-1700mgkg -1 ) and Cd (0.172-2.26mgkg -1 ). The geoaccumulation indices (I geo ) of trace metals decreased in the order Cd>Zn>Ni>Cu>Co>Cr>Pb>As>V. The pollution load indices and potential ecological risk indices (RI) at the sampling sites were similar, with more severe pollution and greater risk presenting in the upper and middle reaches (S1-S6) compared with the lower reaches (S7 and S8). Cd contributed significantly (77.2-87.6%) to the RI. Source identification based on multivariate statistical techniques, including principal component analysis (PCA), correlation analysis (CA) and hierarchical cluster analysis (HACA), was performed to differentiate the origins of trace metals. PCA and CA yielded similar results, indicating that As and V originated from natural sources (e.g., parent materials) and that the other metals were related to anthropogenic activities. HACA based on the I geo showed that Cd was associated mainly with fertilizers, and the origins of Cr, Ni, Cu and Zn were probably industrial effluents, whereas Co and Pb were related to traffic activities. HACA of sediment cores suggested that Dongguan and Shenzhen cities contribute large quantities of metals to the riverine sediment, whereas few metals were discharged from Huizhou City. Copyright © 2016 Elsevier Inc. All rights reserved.

Sedimentary hydrocarbons and sterols in a South Atlantic estuarine/shallow continental shelf transitional environment under oil terminal and grain port influences.

PubMed

Bet, Rafael; Bícego, Marcia C; Martins, César C

2015-06-15

Sterols and hydrocarbons were determined in the surface sediments from the transitional environment between Paranaguá Bay and the shallow continental shelf in the South Atlantic to assess the sources of organic matter (OM) and the contamination status of an area exposed to multiple anthropogenic inputs. Total aliphatic hydrocarbon concentrations were less than 10μgg(-1), which is typical of unpolluted sediments, and related to recent inputs from higher terrestrial plants. Total polycyclic aromatic hydrocarbon ranged from

Baseline study on trace and rare earth elements in marine sediments collected along the Namibian coast.

PubMed

Orani, Anna Maria; Vassileva, Emilia; Wysocka, Irena; Angelidis, Michael; Rozmaric, Martina; Louw, Deon

2018-06-01

Namibia is a fast-growing country with extensive mineral extraction activities used in diamond, fluorspar, uranium, and metals production. To assess the impact of land based human activities on the Namibian coastal marine environment, 25 elements were analyzed in 22 surface sediments samples collected along the coast. After applying a variety of pollution assessment indices (Enrichment Factor, Igeo and Pollution Load Indexes) was concluded that As, Cd and Sb were considerably enriched in the sediments from several sites, while Cu, Pb and Zn showed very high enrichment near the Walvis Bay harbor. Pearson's correlation and Principal Component Analysis were used to investigate common metal sources. Additionally, the determination of Pb isotope ratios confirmed the contribution of land based human activities at Walvis Bay and Lüderitz as sources of pollution. The analysis of REEs did not reveal any important enrichment due to anthropogenic activities, but provides a needed baseline for further investigations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Determination of oxygen, nitrogen, and sulfur-containing polycyclic aromatic hydrocarbons (PAHs) in urban stream sediments.

PubMed

Witter, Amy E; Nguyen, Minh H

2016-02-01

Recent studies indicate that PAH transformation products such as ketone or quinone-substituted PAHs (OPAHs) are potent aryl hydrocarbon receptor (AhR) activators that elicit toxicological effects independent of those observed for PAHs. Here, we measured eight OPAHs, two sulfur-containing (SPAH), one oxygen-containing (DBF), and one nitrogen-containing (CARB) heterocyclic PAHs (i.e. ΣONS-PAHs = OPAH8 + SPAH + DBF + CARB) in 35 stream sediments collected from a small (∼1303 km(2)) urban watershed located in south-central Pennsylvania, USA. Combined ΣONS-PAH concentrations ranged from 59 to 1897 μg kg(-1) (mean = 568 μg kg(-1); median = 425 μg kg(-1)) and were 2.4 times higher in urban versus rural areas, suggesting that activities taking place on urban land serve as a source of ΣONS-PAHs to sediments. To evaluate urban land use metrics that might explain these data, Spearman rank correlation analyses was used to evaluate the degree of association between ΣONS-PAH concentrations and urban land-use/land-cover metrics along an urban-rural transect at two spatial scales (500-m and 1000-m upstream). Combined ΣONS-PAH concentrations showed highly significant (p < 0.0001) correlations with ΣPAH19, residential and commercial/industrial land use (RESCI), and combined state and local road miles (MILES), suggesting that ΣONS-PAHs originate from similar sources as PAHs. To evaluate OPAH sources, a subset of ΣONS-PAHs for which reference assemblages exist, an average OPAH fractional assemblage for urban sediments was derived using agglomerative hierarchal cluster (AHC) analysis, and compared to published OPAH source profiles. Urban sediments from the Condoguinet Creek (n = 21) showed highly significant correlations with urban particulate matter (X(2) = 0.05, r = 0.91, p = 0.0047), suggesting that urban particulate matter is an important OPAH source to sediments in this watershed. Results suggest the inclusion of ΣONS-PAH measurements adds value to traditional PAH analyses, and may help elucidate and refine pollutant source identification in urban watersheds. Copyright © 2015 Elsevier Ltd. All rights reserved.

The use of composite fingerprints to quantify sediment sources in a wildfire impacted landscape, Alberta, Canada.

PubMed

Stone, M; Collins, A L; Silins, U; Emelko, M B; Zhang, Y S

2014-03-01

There is increasing global concern regarding the impacts of large scale land disturbance by wildfire on a wide range of water and related ecological services. This study explores the impact of the 2003 Lost Creek wildfire in the Crowsnest River basin, Alberta, Canada on regional scale sediment sources using a tracing approach. A composite geochemical fingerprinting procedure was used to apportion the sediment efflux among three key spatial sediment sources: 1) unburned (reference) 2) burned and 3) burned sub-basins that were subsequently salvage logged. Spatial sediment sources were characterized by collecting time-integrated suspended sediment samples using passive devices during the entire ice free periods in 2009 and 2010. The tracing procedure combines the Kruskal-Wallis H-test, principal component analysis and genetic-algorithm driven discriminant function analysis for source discrimination. Source apportionment was based on a numerical mass balance model deployed within a Monte Carlo framework incorporating both local optimization and global (genetic algorithm) optimization. The mean relative frequency-weighted average median inputs from the three spatial source units were estimated to be 17% (inter-quartile uncertainty range 0-32%) from the reference areas, 45% (inter-quartile uncertainty range 25-65%) from the burned areas and 38% (inter-quartile uncertainty range 14-59%) from the burned-salvage logged areas. High sediment inputs from burned and the burned-salvage logged areas, representing spatial source units 2 and 3, reflect the lasting effects of forest canopy and forest floor organic matter disturbance during the 2003 wildfire including increased runoff and sediment availability related to high terrestrial erosion, streamside mass wasting and river bank collapse. The results demonstrate the impact of wildfire and incremental pressures associated with salvage logging on catchment spatial sediment sources in higher elevation Montane regions where forest growth and vegetation recovery are relatively slow. Copyright © 2013 Elsevier B.V. All rights reserved.

On the distribution and inventories of radionuclides in dated sediments around the Swedish coast.

PubMed

Olszewski, Grzegorz; Andersson, Pål; Lindahl, Patric; Eriksson, Mats

2018-06-01

The activity concentrations and distribution of 137 Cs, 238 Pu, 239+240 Pu, 241 Am, and 210 Pb was determined by the analysis of six sediment cores from the Baltic Sea and Kattegat. The chronology of the sediment cores has been used to evaluate the origin and time trend of the radionuclide sources in these sediments. The sediment cores were dated with a 210 Pb model and the results were validated with fallout peaks, assumed to originate from the global nuclear weapons testing and the Chernobyl accident. Source identification, using the isotopic and radionuclide activity ratios, showed that the Chernobyl accident is the main source of 137 Cs in the Baltic Sea; for 239+240 Pu and 241 Am the dominant source was shown to be fallout from nuclear weapons tests. For 238 Pu and 241 Am the Chernobyl accident had a significant impact on the direct fallout into the Baltic Proper, with up to a 65% contribution in the sediment slices dated to 1986. In these sediment slices the maximum activity ratios of 238 Pu/ 239+240 Pu and 241 Am/ 239+240 Pu were 0.314 ± 0.008 and 1.29 ± 0.06, respectively. The ratios clearly deviate from the corresponding ratios for global nuclear weapons fallout (around 0.028 and 0.54, respectively). Calculated inventories were 63-175 Bq·m -2 for 239+240 Pu, 2.8-7.8 for 238 Pu Bq·m -2 and 0.92-44.4 kBq·m -2 for 137 Cs. Different fallout patterns for 137 Cs and plutonium isotopes from the Chernobyl accident were confirmed through depth profiles analyses. The maximum inventory of 137 Cs was observed in the Bothnian Sea, while Chernobyl-derived plutonium was found to be mostly present in Northern Baltic Proper. The radionuclides distribution in the depth profiles shows how contaminated water affects the sediment as it passes sampling stations according to the current circulation pattern in the Baltic Sea. Additionally, the effect of increased activity concentrations from of river discharges in the most contaminated area in the Bothnian Sea was observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Concentrations and sources of polycyclic aromatic hydrocarbons in surface coastal sediments of the northern Gulf of Mexico

PubMed Central

2014-01-01

Background Coastal sediments in the northern Gulf of Mexico have a high potential of being contaminated by petroleum hydrocarbons, such as polycyclic aromatic hydrocarbons (PAHs), due to extensive petroleum exploration and transportation activities. In this study we evaluated the spatial distribution and contamination sources of PAHs, as well as the bioavailable fraction in the bulk PAH pool, in surface marsh and shelf sediments (top 5 cm) of the northern Gulf of Mexico. Results PAH concentrations in this region ranged from 100 to 856 ng g−1, with the highest concentrations in Mississippi River mouth sediments followed by marsh sediments and then the lowest concentrations in shelf sediments. The PAH concentrations correlated positively with atomic C/N ratios of sedimentary organic matter (OM), suggesting that terrestrial OM preferentially sorbs PAHs relative to marine OM. PAHs with 2 rings were more abundant than those with 5–6 rings in continental shelf sediments, while the opposite was found in marsh sediments. This distribution pattern suggests different contamination sources between shelf and marsh sediments. Based on diagnostic ratios of PAH isomers and principal component analysis, shelf sediment PAHs were petrogenic and those from marsh sediments were pyrogenic. The proportions of bioavailable PAHs in total PAHs were low, ranging from 0.02% to 0.06%, with higher fractions found in marsh than shelf sediments. Conclusion PAH distribution and composition differences between marsh and shelf sediments were influenced by grain size, contamination sources, and the types of organic matter associated with PAHs. Concentrations of PAHs in the study area were below effects low-range, suggesting a low risk to organisms and limited transfer of PAHs into food web. From the source analysis, PAHs in shelf sediments mainly originated from direct petroleum contamination, while those in marsh sediments were from combustion of fossil fuels. PMID:24641695

The behavioural characteristics of sediment properties and their implications for sediment fingerprinting as an approach for identifying sediment sources in river basins

NASA Astrophysics Data System (ADS)

Koiter, A. J.; Owens, P. N.; Petticrew, E. L.; Lobb, D. A.

2013-10-01

Sediment fingerprinting is a technique that is increasingly being used to improve the understanding of sediment dynamics within river basins. At present, one of the main limitations of the technique is the ability to link sediment back to their sources due to the non-conservative nature of many of the sediment properties. The processes that occur between the sediment source locations and the point of collection downstream are not well understood or quantified and currently represent a black-box in the sediment fingerprinting approach. The literature on sediment fingerprinting tends to assume that there is a direct connection between sources and sinks, while much of the broader environmental sedimentology literature identifies that numerous chemical, biological and physical transformations and alterations can occur as sediment moves through the landscape. The focus of this paper is on the processes that drive particle size and organic matter selectivity and biological, geochemical and physical transformations and how understanding these processes can be used to guide sampling protocols, fingerprint selection and data interpretation. The application of statistical approaches without consideration of how unique sediment fingerprints have developed and how robust they are within the environment is a major limitation of many recent studies. This review summarises the current information, identifies areas that need further investigation and provides recommendations for sediment fingerprinting that should be considered for adoption in future studies if the full potential and utility of the approach are to be realised.

Geochemical partitioning of lead in biogenic carbonate sediments in a coral reef depositional environment.

PubMed

Horta-Puga, Guillermo

2017-03-15

The fate of trace elements in reef depositional environments has not been extensively investigated. The aim of this study was to determine the partitioning of Pb in sediments of the Veracruz Reef System, and its relation to local environmental sources. Lead was determined in four geochemical fractions: exchangeable (3.8±0.4μgg -1 ), carbonate (57.0±13.6μgg -1 ), organic matter (2.0±0.9μgg -1 ), and mineral (17.5±5.4μgg -1 ). For the mineral fraction, lead concentrations were higher in those reefs influenced by river discharge or by long-distance transport of terrigenous sediments. The bioavailable concentration of lead (range: 21.9-85.6μgg -1 ) indicates that the Veracruz Reef System is a moderately polluted area. As expected, the carbonate fraction contained the highest proportion of Pb (70%), and because the reef framework is largely made up of by biogenic carbonate sediments, hence, it is therefore the most important repository of Pb in coral reef depositional environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Data on heavy metal and magnetic relationships in coastal sediments from South East Coast of Tamilnadu, India.

PubMed

Ravisankar, R; Harikrishnan, N; Chandrasekaran, A; Gandhi, M Suresh; Alagarsamy, R

2018-02-01

In this data, the heavy metal concentration and magnetic susceptibility in coastal sediment samples collected from Periyakalapet to Parangaipettai of East Coast of Tamilnadu using Energy Dispersive X-ray Fluorescence (EDXRF) technique and dual frequency susceptibility meter. We aimed to (i) determine the heavy metal concentration in the sediments from Periyakalapet to Parangaipettai of East Coast of Tamilnadu (ii) assess the magnetic mineral property of sediments (iii) study the correlation between heavy metal and magnetic susceptibility. The determined heavy metal concentration found in the order of Mn> Ba > V > Cr > Zn > La > Ni >Pb> Co > As > Cd > Cu > Al > Fe >Ca> Ti > K > Mg. The magnetic susceptibility (χ lf ) measurements show that they vary from 5.92×10 -8  m 3  kg -1 to 29.06×10 -8  m 3  kg -1 with an average of 20.39×10 -8  m 3  kg -1 . Analysed data confirmed that magnetic susceptibility has the potential tool to indicate the heavy metal pollution sources.

Can the origin of some metals in the seagrass Posidonia oceanica be determined by the indexes of metals pollutions?

PubMed

Stanković, Slavka; Jović, Mihajlo; Tanaskovski, Bojan; Mihajlović, Marija L; Joksimović, Danijela; Pezo, Lato

2015-06-01

To assess metal pollution, Fe, Mn, Cu, Zn, Pb, Ni, Co, As, Cd, and Hg contents in samples of the seagrass Posidonia oceanica and surface sediment, collected at eight locations along the Montenegrin coast, were determined. The metal pollution index (MPI) and metal enrichment factor (EF) were then calculated. MPI and EF were lower in sediment than in P. oceanica at the same locations. This was very evident for EF values of Hg and Cd. Based on the Pearson's correlations and EF values, it was possible to conclude that the last two metals' content in the seagrass did not originate from the crustal sources or natural weathering processes.

Shifting sources and transport paths for the late Quaternary Escanaba Trough sediment fill (northeast Pacific)

USGS Publications Warehouse

Zuffa, G.G.; De Rosa, R.; Normark, W.R.

1997-01-01

Escanaba Trough, which forms the southernmost part of the axial valley of the actively spreading Gorda Ridge, is filled with several hundred meters of sediment of presumed late Quaternary age. Surficial sediment samples from gravity cores, deeper samples (as much as 390 m) from Site 35 of the Deep Sea Drilling Program (Leg 5), and the acoustic character of the sediment fill observed on seismic-reflection profiles indicate that much of the sediment fill is of turbidite origin. Gross composition and heavy- mineral analyses of sand samples show that two distinct petrofacies comprise the sediment fill. The lower part of the fill was derived primarily from the Klamath River source of northern California while the younger fill, including the surficial sand beds, are from the Columbia River drainage much farther north. The Escanaba Trough sediment provides an opportunity to evaluate concepts for paleogeographic and paleotectonic reconstructions that are based on facies analysis and compositional and textural data for the volcanic components because both intrabasinal and extrabasinal sources are present as well as coeval (neovolcanic) and non coeval (paleovolcanic) sourcre This study of a modern basin shows, that although the sediment sources could be identified, it was useful to have some knowledge of the sediment pathway(s), the effects of diagenesis, and the possible effects of sediment sorting as a result of long transport distances from the source area for some components. Application of these same techniques to ancient deposits without benefit of the additional parameters will face limitations.

Comparing Bayesian stable isotope mixing models: Which tools are best for sediments?

NASA Astrophysics Data System (ADS)

Morris, David; Macko, Stephen

2016-04-01

Bayesian stable isotope mixing models have received much attention as a means of coping with multiple sources and uncertainty in isotope ecology (e.g. Phillips et al., 2014), enabling the probabilistic determination of the contributions made by each food source to the total diet of the organism in question. We have applied these techniques to marine sediments for the first time. The sediments of the Chukchi Sea and Beaufort Sea offer an opportunity to utilize these models for organic geochemistry, as there are three likely sources of organic carbon; pelagic phytoplankton, sea ice algae and terrestrial material from rivers and coastal erosion, as well as considerable variation in the marine δ13C values. Bayesian mixing models using bulk δ13C and δ15N data from Shelf Basin Interaction samples allow for the probabilistic determination of the contributions made by each of the sources to the organic carbon budget, and can be compared with existing source contribution estimates based upon biomarker models (e.g. Belicka & Harvey, 2009, Faux, Belicka, & Rodger Harvey, 2011). The δ13C of this preserved material varied from -22.1 to -16.7‰ (mean -19.4±1.3‰), while δ15N varied from 4.1 to 7.6‰ (mean 5.7±1.1‰). Using the SIAR model, we found that water column productivity was the source of between 50 and 70% of the organic carbon buried in this portion of the western Arctic with the remainder mainly supplied by sea ice algal productivity (25-35%) and terrestrial inputs (15%). With many mixing models now available, this study will compare SIAR with MixSIAR and the new FRUITS model. Monte Carlo modeling of the mixing polygon will be used to validate the models, and hierarchical models will be utilised to glean more information from the data set.

A fingerprinting mixing model approach to generate uniformly representative solutions for distributed contributions of sediment sources in a Pyrenean drainage basin

NASA Astrophysics Data System (ADS)

Palazón, Leticia; Gaspar, Leticia; Latorre, Borja; Blake, Will; Navas, Ana

2014-05-01

Spanish Pyrenean reservoirs are under pressure from high sediment yields in contributing catchments. Sediment fingerprinting approaches offer potential to quantify the contribution of different sediment sources, evaluate catchment erosion dynamics and develop management plans to tackle the reservoir siltation problems. The drainage basin of the Barasona reservoir (1509 km2), located in the Central Spanish Pyrenees, is an alpine-prealpine agroforest basin supplying sediments to the reservoir at an annual rate of around 350 t km-2 with implications for reservoir longevity. The climate is mountain type, wet and cold, with both Atlantic and Mediterranean influences. Steep slopes and the presence of deep and narrow gorges favour rapid runoff and large floods. The ability of geochemical fingerprint properties to discriminate between the sediment sources was investigated by conducting the nonparametric Kruskal-Wallis H-test and a stepwise discriminant function analysis (minimization of Wilk's lambda). This standard procedure selects potential fingerprinting properties as optimum composite fingerprint to characterize and discriminate between sediment sources to the reservoir. Then the contribution of each potential sediment source was assessed by applying a Monte Carlo mixing model to obtain source proportions for the Barasona reservoir sediment samples. The Monte Carlo mixing model was written in C programming language and designed to deliver a user-defined number possible solutions. A Combinatorial Principals method was used to identify the most probable solution with associated uncertainty based on source variability. The unique solution for each sample was characterized by the mean value and the standard deviation of the generated solutions and the lower goodness of fit value applied. This method is argued to guarantee a similar set of representative solutions in all unmixing cases based on likelihood of occurrence. Soil samples for the different potential sediment sources of the drainage basin were compared with samples from the reservoir using a range of different fingerprinting properties (i.e. mass activities of environmental radionuclides, elemental composition and magnetic susceptibility) analyzed in the < 63 μm sediment fraction. In this case, the 100 best results from 106 generated iterations were selected obtaining a goodness of fit higher than 0.76. The preliminary results using this new data processing methodology for samples collected in the reservoir allowed us to identify cultivated fields and badlands as main potential sources of sediments to the reservoir. These findings support the appropriate use of the fingerprinting methodology in a Spanish Pyrenees basin, which will enable us to better understand the basin sediment production of the Barasona reservoir.

From streets to streams: assessing the toxicity potential of urban sediment by particle size

USGS Publications Warehouse

Corsi, Steven R.; Selbig, William R.; Roger T. Bannerman,; ,

2013-01-01

Urban sediment can act as a transport mechanism for a variety of pollutants to move towards a receiving water body. The concentrations of these pollutants oftentimes exceed levels that are toxic to aquatic organisms. Many treatment structures are designed to capture coarse sediment but do not work well to similarly capture the fines. This study measured concentrations of select trace metals and PAHs in both the silt and sand fractions of urban sediment from four sources: stormwater bed, stormwater suspended, street dirt, and streambed. Concentrations were used to assess the toxic potential of sediment based on published sediment quality guidelines. All sources of sediment showed some level of toxic potential with stormwater bed sediment the highest followed by stormwater suspended, street dirt, and streambed. Both metal and PAH concentration distributions were highly correlated between the four sampling locations suggesting the presence of one or perhaps only a few sources of these pollutants which remain persistent as sediment is transported from street to stream. Comparison to other forms of combustion- and vehicle-related sources of PAHs revealed coal tar sealants to have the strongest correlation, in both the silt and sand fractions, at all four sampling sites. This information is important for environmental managers when selecting the most appropriate Best Management Practice (BMP) as a way to mitigate pollution conveyed in urban stormwater from source to sink.

The application of microtextural and heavy mineral analysis to discriminate between storm and tsunami deposits

USGS Publications Warehouse

Costa, Pedro J.M.; Gelfenbaum, Guy R.; Dawson, Sue; La selle, Seanpaul; Milne, F; Cascalho, J.; Ponte Lira, C.; Andrade, C.; Freitas, M. C.; Jaffe, Bruce E.

2017-01-01

Recent work has applied microtextural and heavy mineral analyses to sandy storm and tsunami deposits from Portugal, Scotland, Indonesia and the USA. We looked at the interpretation of microtextural imagery (scanning electron microscopy) of quartz grains and heavy mineral compositions. We consider inundation events of different chronologies and sources (the AD 1755 Lisbon and 2004 Indian Ocean tsunamis, the Great Storm of 11 January 2005 in Scotland, and Hurricane Sandy in 2012) that affected contrasting coastal and hinterland settings with different regional oceanographic conditions. Storm and tsunami deposits were examined along with potential source sediments (alluvial, beach, dune and nearshore sediments) to determine provenance.Results suggest that tsunami deposits typically exhibit a significant spatial variation in grain sizes, microtextures and heavy minerals. Storm deposits show less variability, especially in vertical profiles. Tsunami and storm quartz grains had more percussion marks and fresh surfaces compared to potential source material. Moreover, in the studied cases, tsunami samples had fewer fresh surfaces than storm deposits.Heavy mineral assemblages are typically site-specific. The concentration of heavy minerals decreases upwards in tsunamigenic units, whereas storm sediments show cyclic concentrations of heavy minerals, reflected in the laminations observed macroscopically in the deposits.

Large microplastic particles in sediments of tributaries of the River Thames, UK - Abundance, sources and methods for effective quantification.

PubMed

Horton, Alice A; Svendsen, Claus; Williams, Richard J; Spurgeon, David J; Lahive, Elma

2017-01-15

Sewage effluent input and population were chosen as predictors of microplastic presence in sediments at four sites in the River Thames basin (UK). Large microplastic particles (1mm-4mm) were extracted using a stepwise approach to include visual extraction, flotation and identification using Raman spectroscopy. Microplastics were found at all four sites. One site had significantly higher numbers of microplastics than other sites, average 66 particles 100g -1 , 91% of which were fragments. This site was downstream of a storm drain outfall receiving urban runoff; many of the fragments at this site were determined to be derived of thermoplastic road-surface marking paints. At the remaining three sites, fibres were the dominant particle type. The most common polymers identified included polypropylene, polyester and polyarylsulphone. This study describes two major new findings: presence of microplastic particles in a UK freshwater system and identification of road marking paints as a source of microplastics. This study is the first to quantify microplastics of any size in river sediments in the UK and links their presence to terrestrial sources including sewage and road marking paints. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Dioxin-like chemicals in soil and sediment from residential and industrial areas in central South Africa.

PubMed

Nieuwoudt, Claudine; Quinn, Laura P; Pieters, Rialet; Jordaan, Ilse; Visser, Maret; Kylin, Henrik; Borgen, Anders R; Giesy, John P; Bouwman, Henk

2009-08-01

Persistent organic pollutants (POPs) are a global concern due to their ubiquitous presence and toxicity. Currently, there is a lack of information regarding POPs from South Africa. Here we report and interpret concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), -dibenzofurans (PCDFs) and co-planar-biphenyls (PCBs) in soils and sediments collected from central South Africa. High resolution gas chromatography-high resolution mass spectrometry (HRGC/HRMS) and the H4IIE-luc bio-assay were used to identify and quantify individual PCDD/F congeners and to report the total concentration of 2,3,7,8-tetrachloro dibenzo-p-dioxin equivalents (TCDD-EQ), respectively. TCDD-EQs determined by use of the bio-assay, and concentrations of WHO(2005)-TEQ (toxic equivalents) determined by chemical analysis, were similar. The limit of detection (LOD) for the bio-assay was 0.82 and 2.8 ng TCDD-EQ kg(-1), dw for sediment and soil, respectively. EQ20 concentrations determined by use of the bio-assay ranged from

A spatially distributed model for the dynamic prediction of sediment erosion and transport in mountainous forested watersheds

NASA Astrophysics Data System (ADS)

Doten, Colleen O.; Bowling, Laura C.; Lanini, Jordan S.; Maurer, Edwin P.; Lettenmaier, Dennis P.

2006-04-01

Erosion and sediment transport in a temperate forested watershed are predicted with a new sediment model that represents the main sources of sediment generation in forested environments (mass wasting, hillslope erosion, and road surface erosion) within the distributed hydrology-soil-vegetation model (DHSVM) environment. The model produces slope failures on the basis of a factor-of-safety analysis with the infinite slope model through use of stochastically generated soil and vegetation parameters. Failed material is routed downslope with a rule-based scheme that determines sediment delivery to streams. Sediment from hillslopes and road surfaces is also transported to the channel network. A simple channel routing scheme is implemented to predict basin sediment yield. We demonstrate through an initial application of this model to the Rainy Creek catchment, a tributary of the Wenatchee River, which drains the east slopes of the Cascade Mountains, that the model produces plausible sediment yield and ratios of landsliding and surface erosion when compared to published rates for similar catchments in the Pacific Northwest. A road removal scenario and a basin-wide fire scenario are both evaluated with the model.

Sources of suspended-sediment flux in streams of the chesapeake bay watershed: A regional application of the sparrow model

USGS Publications Warehouse

Brakebill, J.W.; Ator, S.W.; Schwarz, G.E.

2010-01-01

We describe the sources and transport of fluvial suspended sediment in nontidal streams of the Chesapeake Bay watershed and vicinity. We applied SPAtially Referenced Regressions on Watershed attributes, which spatially correlates estimated mean annual flux of suspended sediment in nontidal streams with sources of suspended sediment and transport factors. According to our model, urban development generates on average the greatest amount of suspended sediment per unit area (3,928 Mg/km2/year), although agriculture is much more widespread and is the greatest overall source of suspended sediment (57 Mg/km2/year). Factors affecting sediment transport from uplands to streams include mean basin slope, reservoirs, physiography, and soil permeability. On average, 59% of upland suspended sediment generated is temporarily stored along large rivers draining the Coastal Plain or in reservoirs throughout the watershed. Applying erosion and sediment controls from agriculture and urban development in areas of the northern Piedmont close to the upper Bay, where the combined effects of watershed characteristics on sediment transport have the greatest influence may be most helpful in mitigating sedimentation in the bay and its tributaries. Stream restoration efforts addressing floodplain and bank stabilization and incision may be more effective in smaller, headwater streams outside of the Coastal Plain. ?? 2010 American Water Resources Association. No claim to original U.S. government works.

Sources and deposition of polycyclic aromatic hydrocarbons to western US national parks

EPA Science Inventory

Seasonal snowpack, lichens, and lake sediment cores were collected from fourteen lake catchments in eight western U.S. National Parks and analyzed for sixteen polycyclic aromatic hydrocarbons (PAHs) to determine their current and historical deposition, as well as to identify thei...

CADDIS Volume 2. Sources, Stressors and Responses: Sediments

EPA Pesticide Factsheets

Introduction to the Sediments module, when to list Sediments as a candidate cause, ways to measure Sediments, simple and detailed conceptual diagrams for Sediments, Sediments module references and literature reviews.

Lead poisoning in dogs: occurrence, source, clinical pathology, and electroencephalography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zook, B.C.; Carpenter, J.L.; Roberts, R.M.

1972-05-01

Accidental lead poisoning was diagnosed and studied in 236 dogs. The disease incidence increased annually after 1963 and was more common in Poodles and dogs less than 1 year old. The incidence was greatest in summer and early fall and was more common in dogs which dwelt in slum areas than was expected. Lead-based paints were the most frequent source of poisoning. Results of hematologic and urinary determinations supported those of previous studies. The diagnostic importance of nucleated and stippled red blood cells (RBC) in peripheral blood films was emphasized, and urine sediments frequently contained casts with few inflammatory cells.more » In addition, reticulocyte counts were usually increased and sedimentation rates and Coomb's test results were normal. Results of bone marrow studies indicated hyperplasia of, and partial maturation defect in, the erythrocytic series of most dogs. Determinations of various clinical chemistry tests and cerebrospinal fluid analysis were usually normal. Electroencephalographic changes consisted of irregular, generalized slow-wave activity of increased amplitude. 20 references, 5 figures, 12 tables.« less

Conditions affecting the release of phosphorus from surface lake sediments.

PubMed

Christophoridis, Christophoros; Fytianos, Konstantinos

2006-01-01

Laboratory studies were conducted to determine the effect of pH and redox conditions, as well as the effect of Fe, Mn, Ca, Al, and organic matter, on the release of ortho-phosphates in lake sediments taken from Lakes Koronia and Volvi (Northern Greece). Results were evaluated in combination with experiments to determine P fractionation in the sediment. The study revealed the major effect of redox potential and pH on the release of P from lake sediments. Both lakes showed increased release rates under reductive conditions and high pH values. The fractionation experiments revealed increased mobility of the reductive P fraction as well as of the NaOH-P fraction, indicating participation of both fractions in the overall release of sediment-bound P, depending on the prevailing environmental conditions. The results were assessed in combination with the release patterns of Fe, Mn, Ca, Al, and organic matter, enabling the identification of more specific processes of P release for each lake. The basic release patterns included the redox induced reductive dissolution of P-bearing metal oxides and the competitive exchange of phosphate anions with OH- at high pH values. The formation of an oxidized surface microlayer under oxic conditions acted as a protective film, preventing further P release from the sediments of Lake Volvi, while sediments from Lake Koronia exhibited a continuous and increased tendency to release P under various physicochemical conditions, acting as a constant source of internal P loading.

Understanding Polycyclic Aromatic Hydrocarbon transfers at the catchment scale combining chemical and fallout radionuclide analyses

NASA Astrophysics Data System (ADS)

Gateuille, D.; Evrard, O.; Lefevre, I.; Moreau-Guigon, E.; Alliot, F.; Chevreuil, M.; Mouchel, J.-M.

2012-04-01

Reducing environmental contamination constitutes a major challenge for industrialized countries. Furthermore, in the European Union, Water Framework Directive (WFD; Directive 2000/60/EC) requires that the member state water bodies reach good ecological and chemical status by 2015. Polycyclic Aromatic Hydrocarbons (PAHs) are a group of persistent organic pollutants considered as priority pollutants because of their mutagenic and carcinogenic properties. They are mostly emitted by human activities such as household heating or road traffic. Although emissions have decreased during the last decades, a large amount of PAHs have been released into the atmosphere for the last two centuries. In recent years, studies dealing with PAHs have grown in number but most of them were restricted to the measurement of PAHs concentrations in the different compartments of the environment (air, soil, sediment, water, etc.). In this context, there remains a lack of knowledge about the transfers and, consequently, about the persistence of these compounds in the environment. This question is particularly acute in the Seine River basin where very high concentrations in PAHs are reported in sediment, thereby compromising the achievement of the good chemical status required by WFD. Our study aims to quantify PAHs transfers at the catchment scale by combining chemical analysis with gamma spectrometry. Atmospheric fallout, soil, river water and sediment samples were collected in two upstream sub-catchments of the Seine River basin during one year. Chemical analyses, restricted to 15 of the 16 PAHs selected by the US Environmental Protection Agency (USEPA), were carried out to determine PAHs concentrations in all samples. Contamination spectra were used to outline the potential origin of pollution. Measurement of fallout radionuclides (Beryllium-7, Lead-210, Caesium-137) in both rainfall and river sediment provided a way to discriminate between freshly eroded sediment vs. material that deposited on the riverbed. These data are crucial to estimate PAH residence time in the Seine River basin and to know if current river pollution is resulting from recent emissions or from the persistence of former sources. Results show that spectra of contaminants in sediment are similar in most of the sampling sites. This underlines the possibility of a common primary source. Moreover, local variations of atmospheric PAHs fallout are poorly significant within the subcatchments, even though concentrations greatly vary in sediment. This underlines the presence of local secondary sources where accumulation of atmospheric fallout is more important but their deposition ways still remain to determine. At other sites, impact of urbanized area is more likely to be the source of light HAPs in sediment. Measurements in soils show larger concentrations in forest than in grassland or in cropland. This can be explained by a bigger affinity of PAHs for the soils richer in Organic matter (OM) and lower erodibility of woodland.

Quantitative mineralogy of the Yukon River system: Changes with reach and season, and determining sediment provenance

USGS Publications Warehouse

Eberl, D.D.

2004-01-01

The mineralogy of Yukon River basin sediment has been studied by quantitative X-ray diffraction. Bed, beach, bar, and suspended sediments were analyzed using the RockJock computer program. The bed sediments were collected from the main stem and from selected tributaries during a single trip down river, from Whitehorse to the Yukon River delta, during the summer of 2001. Beach and bar sediments were collected from the confluence region of the Tanana and Yukon Rivers during the summer of 2003. Suspended sediments were collected at three stations on the Yukon River and from a single station on the Tanana River at various times during the summers of 2001 through 2003, with the most complete set of samples collected during the summer of 2002. Changes in mineralogy of Yukon River bed sediments are related to sediment dilution or concentration effects from tributary sediment and to chemical weathering during transport. Carbonate minerals compose about 2 wt% of the bed sediments near Whitehorse, but increase to 14 wt% with the entry of the White River tributary above Dawson. Thereafter, the proportion of carbonate minerals decreases downstream to values of about 1 to 7 wt% near the mouth of the Yukon River. Quartz and feldspar contents of bed sediments vary greatly with the introduction of Pelly River and White River sediments, but thereafter either increase irregularly (quartz from 20 to about 50 wt%) or remain relatively constant (feldspar at about 35 wt%) with distance downstream. Clay mineral content increases irregularly downstream from about 15 to about 30 wt%. The chief clay mineral is chlorite, followed by illite + smectite; there is little to no kaolinite. The total organic carbon content of the bed sediments remains relatively constant with distance for the main stem (generally 1 to 2 wt%, with one exception), but fluctuates for the tributaries (1 to 6 wt%). The mineralogies of the suspended sediments and sediment flow data were used to calculate the amount of mineral dissolution during transport between Eagle and Pilot Station, a distance of over 2000 km. We estimate that approximately 3 wt% of the quartz, 15 wt% of the feldspar (1 wt% of the alkali and 25 wt% of the plagioclase), and 26 wt% of the carbonates (31 wt% of the calcite and 15 wt% of the dolomite) carried by the river dissolve in this reach. The mineralogies of the suspended sediments change with the season. For example, during the summer of 2002 the quartz content varied by 20 wt%, with a minimum in mid-summer. The calcite content varied by a similar amount, and had a maximum corresponding to the quartz minimum. These modes are related to the relative amount of sediment flowing from the White River system, which is relatively poor in quartz, but rich in carbonate minerals. Suspended total clay minerals varied by as much as 25 wt%, with maxima in mid July, and suspended feldspar varied up to 10 wt%. Suspended sediment data from the summers of 2001 and 2003 support the 2002 trends. A calculation technique was developed to determine theproportion of various sediment sources in a mixed sediment by unmixing its quantitative mineralogy. Results from this method indicate that at least three sediment sources can be identified quantitatively with good accuracy. With this technique, sediment mineralogies can be used to calculate the relative flux of sediment from different tributaries, thereby identifying sediment provenance.

Badlands as a major source of petrogenic particulate Organic Carbon and sediments to the Gulf of Lion (NW Mediterranean Sea)

NASA Astrophysics Data System (ADS)

Copard, Y.; Eyrolle-Boyer, F.; Radakovitch, O.; Poirel, A.; Raimbault, P.; Gairoard, S.; Di-Giovanni, C.

2017-12-01

Rivers feed the marine environments both in term of sediments and nutrients and consequently, the characterization of their nature, sources and changes over a different spatial and time ranges is a critical for many scientific (e.g. biogeochemical cycles, contaminants transfer, geomorphology, ecology) and societal issues (e.g. food security, catastrophic floods). Specifically, continental sources showing some high erosion rates deserve to be studied since their fingerprint can be significant for the rivers fluxes. These included some sedimentary rocks (e.g. marls) forming badlands and containing a significant amount of petrogenic particulate organic carbon (pPOC) for which its contribution to the Rivers still remains evasive. Our study focuses on the Mediterranean area considered as very sensitive to the Global Change and particularly the Gulf of Lion mainly fed by the Rhône River, one of the major conveyors of sediments to this Sea. Based on radiocarbon data performed on a set of riverine samples and time series analyses from monitoring stations from French CZOs, we (i) update the POC flux of the Rhône River, (ii) determine the pPOC content and flux in suspended sediments and (iii) estimate the badlands contribution from the Durance catchment (a major tributary of the Rhône River) to the pPOC flux and to sediment discharge. Sediment discharge by the Rhône River to the Sea is 6.5 ± 4.3 Tg yr-1 (period 1990-2014) , its POC discharge reaches 0.145 ± 0.095 Tg yr-1 (period 2007-2014) while pPOC (0.44 wt. %) contributes to 30 % of this POC flux. Despite their insignificant surfaces (0.2 %) regarding the Rhône catchment area, badlands presently in erosion from the Durance catchment provide respectively, 16, 5 and 20 % of the pPOC, POC and sediment fluxes to the Rhône River. Consequently, badlands can be considered as a major source of sediments and pPOC for the NW Mediterranean Sea. We suggest that river-dominated ocean margins, such as the Rhône River, with badlands in erosion in their catchment could export a significant amount of sediments and pPOC to the oceans. According to the natural climate variability and more recently to the anthropogenic (LULUCF) disorders occurring in continental surfaces, such contributions had to and will strongly vary with times (from the geological times to the next decades scales).

Simulated effects of existing and proposed surface-water impoundments and gas-well pads on streamflow and suspended sediment in the Cypress Creek watershed, Arkansas

USGS Publications Warehouse

Hart, Rheannon M.

2014-01-01

The Arkansas Natural Resources Commission and the Arkansas Department of Environmental Quality list suspended sediment from “poor pastures” as a primary source of nonpoint-source pollution in north-central Arkansas, but unpaved (gravel) roads are another important source of suspended sediment. Because of the high sediment-loading rates associated with gravel roads and the large amount of pasture within the watershed, the factors most responsible for suspended sediment within the Cypress Creek watershed are likely associated more with the pastureland and gravel roads, than factors associated with gas-well pads/pipelines.

Fate of polychlorinated biphenyls in a contaminated lake ecosystem: combining equilibrium passive sampling of sediment and water with total concentration measurements of biota.

PubMed

Mäenpää, Kimmo; Leppänen, Matti T; Figueiredo, Kaisa; Mayer, Philipp; Gilbert, Dorothea; Jahnke, Annika; Gil-Allué, Carmen; Akkanen, Jarkko; Nybom, Inna; Herve, Sirpa

2015-11-01

Equilibrium sampling devices can be applied to study and monitor the exposure and fate of hydrophobic organic chemicals on a thermodynamic basis. They can be used to determine freely dissolved concentrations and chemical activity ratios and to predict equilibrium partitioning concentrations of hydrophobic organic chemicals in biota lipids. The authors' aim was to assess the equilibrium status of polychlorinated biphenyls (PCBs) in a contaminated lake ecosystem and along its discharge course using equilibrium sampling devices for measurements in sediment and water and by also analyzing biota. The authors used equilibrium sampling devices (silicone rubber and polyethylene [PE]) to determine freely dissolved concentrations and chemical activities of PCBs in the water column and sediment porewater and calculated for both phases the corresponding equilibrium concentrations and chemical activities in model lipids. Overall, the studied ecosystem appeared to be in disequilibrium for the studied phases: sediment, water, and biota. Chemical activities of PCBs were higher in sediment than in water, which implies that the sediment functioned as a partitioning source of PCBs and that net diffusion occurred from the sediment to the water column. Measured lipid-normalized PCB concentrations in biota were generally below equilibrium lipid concentrations relative to the sediment (CLip ⇌Sed ) or water (CLip ⇌W ), indicating that PCB levels in the organisms were below the maximum partitioning levels. The present study shows the application versatility of equilibrium sampling devices in the field and facilitates a thermodynamic understanding of exposure and fate of PCBs in a contaminated lake and its discharge course. © 2015 SETAC.

Mapping sediment contamination and toxicity in Winter Quarters Bay, McMurdo Station, Antarctica.

PubMed

Crockett, Alan B; White, Gregory J

2003-07-01

Winter Quarters Bay (WQB) is a small embayment located adjacent to McMurdo Station, the largest research base in Antarctica. The bay is approximately 250 m wide and long, with a maximum depth of 33 m. Historically, trash from the McMurdo Station was piled on the steep shoreline of WQB, doused with fuel and ignited. That practice has ceased, and the adjacent land area has been regraded to cover the residual waste. The bottom of WQB remains littered with drums, equipment, tanks, tires, cables, and other objects, especially the southeastern side of the bay where dumping took place. Sediments are contaminated with PCBs, metals, and hydrocarbon fuels. The objectives of this study were to map the distribution of organic contaminants in WQB, assess the toxicity of WQB sediments using a simple microbial test, and determine correlations between toxicity and contaminant levels. The study suggests that adverse ecological effects have occurred from one or more of the contaminants found in WQB but the source of the toxic impacts to bay sediments remains unknown. Whole sediment toxicity was only correlated with oil-equivalent while solvent extracts of sediments were correlated with PAHs and oil-equivalent. The authors recommend that an integrated research plan be developed that focuses on determining what additional information is needed to make informed decisions on possible remediation of WQB.

Turbidity and suspended-sediment transport in the Russian River Basin, California

USGS Publications Warehouse

Ritter, John R.; Brown, William M.

1971-01-01

The Russian River in north coastal California has a persistent turbidness, which has reportedly caused a decline in the success of the sports fishermen. As a consequence, the number of sports fishermen angling in the river has declined, and industries dependent on their business have suffered. To determine the source of the turbidity and the rate of sediment transport in the basin, a network of sampling station was established in February 1964 along the river, on some of its tributaries, and near Lake Pillsbury in the upper Eel River basin.

Quantifying sources of fine sediment supplied to post-fire debris flows using fallout radionuclide tracers

NASA Astrophysics Data System (ADS)

Smith, Hugh; Sheridan, Gary; Nyman, Petter; Child, David; Lane, Patrick; Hotchkis, Michael

2013-04-01

The supply of fine sediment and ash has been identified as an important factor contributing to the initiation of runoff-generated debris flows after fire. However, despite the significance of fines for post-fire debris flow generation, no investigations have sought to quantify sources of this material in debris flow affected catchments. In this study, we employ fallout radionuclides (Cs-137, excess Pb-210 and Pu-239,240) as tracers to measure proportional contributions of fine sediment (<10 μm) from hillslope surface and channel bank sources to levee and terminal fan deposits formed by post-fire debris flows in two forest catchments in southeastern Australia. While Cs-137 and excess Pb-210 have been widely used in sediment tracing studies, application of Pu as a tracer represents a recent development and was limited to only one catchment. The estimated range in hillslope surface contributions of fine sediment to individual debris flow deposits in each catchment was 22-69% and 32-74%, respectively. No systematic change in the source contributions to debris flow deposits was observed with distance downstream from channel initiation points. Instead, spatial variability in source contributions was largely influenced by the pattern of debris flow surges forming the deposits. Linking the sediment tracing with interpretation of depositional evidence allowed reconstruction of temporal sequences in sediment source contributions to debris flow surges. Hillslope source inputs dominated most elevated channel deposits such as marginal levees that were formed under peak flow conditions. This indicated the importance of hillslope runoff and sediment supply for debris flow generation in both catchments. In contrast, material stored within channels that was deposited during subsequent surges was predominantly channel-derived. The results demonstrate that fallout radionuclide tracers may provide unique information on the changing source contributions of fine sediment during debris flow events.

U-Pb Detrital Zircon Geochronologic Constraints on Depositional Age and Sediment Source Terrains of the Late Paleozoic Tepuel-Genoa Basin

NASA Astrophysics Data System (ADS)

Griffis, N. P.; Montanez, I. P.; Isbell, J.; Gulbranson, E. L.; Wimpenny, J.; Yin, Q. Z.; Cúneo, N. R.; Pagani, M. A.; Taboada, A. C.

2014-12-01

The late Paleozoic Ice Age (LPIA) is the longest-lived icehouse of the Phanerozoic and the only time a metazoan dominated and vegetated world transitioned from an icehouse climate into a greenhouse. Despite several decades of research, the timing, extent of glaciation and the location of ice centers remain unresolved, which prohibits reconstruction of ice volume. The Permo-Carboniferous sediments in the Tepuel-Genoa Basin, Patagonia contains a near complete record of sedimentation from the lower Carboniferous through lower Permian. Outsized clasts, thin pebble-rich diamictites and slumps represent the last of the late Paleozoic glacially influenced deep-water marine sediments in the Mojón de Hierro Fm. and the Paleozoic of Patagonia. U-Pb analysis of detrital zircons separated from slope sediments reveal groupings (20 myr bins, n≥5 zircons) with peak depositional ages of 420, 540 to 660 and 1040 Ma. Zircon age populations recovered from the Mojón de Hierro Fm. compare well with bedrock ages of the Deseado Massif of SE Patagonia, suggesting this may be a potential source of sediments. The maximum depositional age of the sediments is 306.05 ± 3.7 Ma (2σ) as determined by the median age of the two youngest concordant zircons that overlap in error. The youngest zircon from the analysis yields a 238U/206Pb age of 301.3 ± 4.5 Ma (2σ; MSWD = 2.3). Younger zircons from the analysis compare well with the age of granite bedrock exposed along the basin margin to the E-NE suggesting they may reflect a more proximal source. These data, which indicate a maximum age of late Carboniferous for the Mojón de Hierro Fm, provide the first geochemical constraints for the timing of final deposition of glaciomarine sediments in the Tepuel-Genoa Basin, and contributes to the biostratigraphic correlation of the late Paleozoic succession in Patagonia with other key LPIA basins that has thus far been hindered by faunal provincialism.

Sediment tracing by `customised' magnetic fingerprinting: from the sub-catchment to the ocean scale

NASA Astrophysics Data System (ADS)

Maher, B.

2009-04-01

Robust identification of catchment suspended sediment sources is a prerequisite both for understanding sediment delivery processes and targeting of effective mitigation measures. Fine sediment delivery can pose management problems, especially with regard to nutrient run-off and siltation of water courses and bodies. Suspended sediment load constitutes the dominant mode of particulate material loss from catchments but its transport is highly episodic. Identification of suspended sediment sources and fluxes is therefore a prerequisite both for understanding of fluvial geomorphic process and systems and for designing strategies to reduce sediment transport, delivery and yields. Here will be discussed sediment ‘fingerprinting', using the magnetic properties of soils and sediments to characterise sediment sources and transport pathways over a very wide variety of spatial scales, from Lake Bassenthwaite in the English Lake District to the Burdekin River in Queensland and even the North Atlantic Ocean during the last glacial maximum. The applicability of magnetic ‘fingerprinting' to such a range of scales and environments has been significantly improved recently through use of new and site-appropriate magnetic measurement techniques, statistical processing and sample treatment options.

(210)Pb as a tracer of soil erosion, sediment source area identification and particle transport in the terrestrial environment.

PubMed

Matisoff, Gerald

2014-12-01

Although (137)Cs has been used extensively to study soil erosion and particle transport in the terrestrial environment, there has been much less work using excess or unsupported (210)Pb ((210)Pbxs) to study the same processes. Furthermore, since (137)Cs activities in soils are decreasing because of radioactive decay, some locations have an added complication due to the addition of Chernobyl-derived (137)Cs, and the activities of (137)Cs in the southern hemisphere are low, there is a need to develop techniques that use (210)Pbxs to provide estimates of rates of soil erosion and particle transport. This paper reviews the current status of (210)Pbxs methods to quantify soil erosion rates, to identify and partition suspended sediment source areas, and to determine the transport rates of particles in the terrestrial landscape. Soil erosion rates determined using (210)Pbxs are based on the unsupported (210)Pb ((210)Pbxs) inventory in the soil, the depth distribution of (210)Pbxs, and a mass balance calibration ('conversion model') that relates the soil inventory to the erosion rate using a 'reference site' at which neither soil erosion nor soil deposition has occurred. In this paper several different models are presented to illustrate the effects of different model assumptions such as the timing, depth and rates of the surface soil mixing on the calculated erosion rates. The suitability of model assumptions, including estimates of the depositional flux of (210)Pbxs to the soil surface and the post-depositional mobility of (210)Pb are also discussed. (210)Pb can be used as one tracer to permit sediment source area identification. This sediment 'fingerprinting' has been extended far beyond using (210)Pb as a single radioisotope to include numerous radioactive and stable tracers and has been applied to identifying the source areas of suspended sediment based on underlying rock type, land use (roads, stream banks, channel beds, cultivated or uncultivated lands, pasture lands, forested lands, construction sites, undisturbed lands) or style of erosion (sheet wash, rills, bank). The transport time of particles in the terrestrial system can be estimated using (7)Be/(210)Pbxs radionuclide ratios and from mass balance models of (210)Pbxs and/or (7)Be in streams. Watershed residence times can be calculated from the radionuclide inventory and the erosional loss rate. Copyright © 2014 Elsevier Ltd. All rights reserved.

CADDIS Volume 2. Sources, Stressors and Responses: Sediments - Detailed Conceptual Diagram

EPA Pesticide Factsheets

Introduction to the Sediments module, when to list Sediments as a candidate cause, ways to measure Sediments, simple and detailed conceptual diagrams for Sediments, Sediments module references and literature reviews.

CADDIS Volume 2. Sources, Stressors and Responses: Sediments - Simple Conceptual Diagram

EPA Pesticide Factsheets

Introduction to the Sediments module, when to list Sediments as a candidate cause, ways to measure Sediments, simple and detailed conceptual diagrams for Sediments, Sediments module references and literature reviews.

Modern Deposition Rates and Patterns of Carbon Burial in Southern Fiordland, New Zealand

NASA Astrophysics Data System (ADS)

Ramirez, M. T.; Allison, M. A.; Vetter, L.; Cui, X.; Bianchi, T. S.; Smith, R. W.; Savage, C.; Schüller, S.

2016-02-01

Fjords have been recognized as a hotspot of organic carbon burial, as they accumulate a disproportionate quantity of organic carbon given their areal extent in comparison to other marine settings. However, organic carbon is buried in context with other biogenic and mineral sediments, so localized sedimentation processes play a critical role in determining rates of organic carbon burial. Therefore, it is important to assess the local sources and processes responsible for depositing inorganic sediment as a control on the burial of organic carbon. Here we evaluate three fjords in southern New Zealand that are not glaciated, with a sedimentary system that is dominantly controlled by terrigenous input at fjord heads, reworking of sediments over fjord-mouth sills, and landslide events from the steep fjord walls. Sediment cores were collected throughout the three southernmost fjord systems of Fiordland, New Zealand, and analyzed to determine sedimentary fabric, mass accumulation rates, and organic carbon content. Sediment mass accumulation rates from 210Pb geochronology range up to 500 mg/cm2/yr in proximal and distal areas of the fjords, with lower rates (below 200 mg/cm2/yr) in medial reaches, where terrestrial and marine sediment input is minimal. X-radiographs and 210Pb downcore activity trends show evidence of both mass wasting and surface-sediment bioturbation operating throughout the fjords. Percent organic carbon displays a negative correlation with mass accumulation rate and thickness of the sediment surface mixed layer. Rates of organic carbon accumulation ranged from 3.97 to 21.59 mg/cm2/yr, with a mean of 13.41 mg/cm2/yr. Organic carbon accumulation rates are dependent on the sediment accumulation rate and the percent organic carbon of the sediment. Our results highlight the importance of spatial variability in sedimentation processes and rates within fjords when evaluating organic carbon burial in these systems.

Synergies between geomorphic hazard and risk and sediment cascade research fields: exploiting geomorphic processes' susceptibility analyses to derive potential sediment sources in the Oltet, river catchment, southern Romania

NASA Astrophysics Data System (ADS)

Jurchescu, Marta-Cristina

2015-04-01

Identifying sediment sources and sediment availability represents a major problem and one of the first concerns in the field of sediment cascade. This paper addresses the on-site effects associated with sediment transfer, investigating the degree to which studies pertaining to the field of geomorphic hazard and risk research could be exploited in sediment budget estimations. More precisely, the paper investigates whether results obtained in assessing susceptibility to various geomorphic processes (landslides, soil erosion, gully erosion) could be transferred to the study of sediment sources within a basin. The study area is a medium-sized catchment (> 2400 km2) in southern Romania encompassing four different geomorphic units (mountains, hills, piedmont and plain). The region is highly affected by a wide range of geomorphic processes which supply sediments to the drainage network. The presence of a reservoir at the river outlet emphasizes the importance of estimating sediment budgets. The susceptibility analyses are conducted separately for each type of the considered processes in a top-down framework, i.e. at two different scales, using scale-adapted methods and validation techniques in each case, as widely-recognized in the hazard and risk research literature. The analyses start at a regional scale, which has in view the entire catchment, using readily available data on conditioning factors. In a second step, the suceptibility analyses are carried out at a medium scale for selected hotspot-compartments of the catchment. In order to appraise the extent to which susceptibility results are relevant in interpreting sediment sources at catchment scale, scale-induced differences are analysed in the case of each process. Based on the amount of uncertainty revealed by each regional-scale analysis in comparison to the medium-scale ones, decisions are made on whether the first are acceptable to the aim of identifying potential sediment source areas or if they should be refined using more precise methods and input data. The three final basin-wide susceptibility maps are eventually coverted, on a threshold basis, to maps showing the potential areas of sediment production by landslides, soil erosion and gully erosion respectively. These are then combined into one single map of potential sediment sources. The susceptibility assessments indicate that the basin compartments most prone to landslides and soil erosion correspond to the Subcarpathian hills, while the one most threatened by gully erosion corresponds to the piedmont relief. The final map of potential sediment sources shows that approximately 34% of the study catchment is occupied by areas potentially generating sediment through landslides and gully erosion, extending over most of the high piedmont and Subcarpathian hills. The results prove that there is an important link between the two research fields, i.e. geomorphic hazard and risk and sediment cascade, by allowing the transfer of knowledge from geomorphic processes' susceptibility analyses to the estimation of potential sediment sources within catchments. The synergy between the two fields raises further challenges to be tackled in future (e.g. how to derive sediment transfer rates from quantitative hazard estimates).

A 500 year sediment lake record of anthropogenic and natural inputs to Windermere (English Lake District) using double-spike lead isotopes, radiochronology, and sediment microanalysis.

PubMed

Miller, Helen; Croudace, Ian W; Bull, Jonathan M; Cotterill, Carol J; Dix, Justin K; Taylor, Rex N

2014-07-01

A high-resolution record of pollution is preserved in recent sediments from Windermere, the largest lake in the English Lake District. Data derived from X-ray core scanning (validated against wavelength dispersive X-ray fluorescence), radiochronological techniques ((210)Pb and (137)Cs) and ultrahigh precision, double-spike mass spectrometry for lead isotopes are combined to decipher the anthropogenic inputs to the lake. The sediment record suggests that while most element concentrations have been stable, there has been a significant increase in lead, zinc, and copper concentrations since the 1930s. Lead isotope down-core variations identify three major contributory sources of anthropogenic (industrial) lead, comprising gasoline lead, coal combustion lead (most likely source is coal-fired steam ships), and lead derived from Carboniferous Pb-Zn mineralization (mining activities). Periods of metal workings do not correlate with peaks in heavy metals due to the trapping efficiency of up-system lakes in the catchment. Heavy metal increases could be due to flood-induced metal inwash after the cessation of mining and the weathering of bedrock in the catchment. The combination of sediment analysis techniques used provides new insights into the pollutant depositional history of Windermere and could be similarly applied to other lake systems to determine the timing and scale of anthropogenic inputs.

Variations in sedimentological properties in Lake Challa, East Africa: Understanding the source to sink processes

NASA Astrophysics Data System (ADS)

Meyer, Inka; Eloy, Jonas; Verschuren, Dirk; De Batist, Marc

2016-04-01

The clastic mineral fraction of lacustrine sediments has been proven to provide valuable information about sedimentation dynamics within a lake, and it can be used to define distinct terrestrial source areas and transport mechanisms from source to sink. Down-core variation in the properties of the clastic mineral fraction yields indications for changes in terrestrial sediment sources over time. However, in order to use terrestrial proxies in palaeo-environmental reconstruction, we have to understand and quantify the modern conditions of sediment provenance and deposition at the study site. In this study we present data on grain-size distribution, mineralogy and particle shape of the clastic mineral component of lacustrine sediments from Lake Challa, a small freshwater lake of volcanic origin, located on the eastern slope of Mt. Kilimanjaro. Situated close to the equator, it contains a uniquely long and continuous sediment sequence allowing the study of inter-hemispheric climate dynamics. The finely laminated profundal sediments of Lake Challa are characterized by a fine-grained texture and are mainly composed of organic matter, biogenic silica and authigenic carbonate, with a relatively minor component of detrital mineral that can either originate from erosion of the steep volcanic crater walls or was mobilized by wind from unvegetated areas of the surrounding scrub savannah landscape. In order to distinguish between these two sources of terrestrial sediment input (i.e., local run-off versus distant aeolian) into Lake Challa, and to map out differences in sediment properties, samples were investigated from profundal surface sediments and short cores, as well as on-shore soils from several locations around the lake and from beyond the crater catchment. Variation in grain-size distribution and mineralogy can be linked to distinct terrestrial sources, whereas the shape of single particles gives additional information about transport dynamics. In future, the results from this study will be applied to the down-core record of Lake Challa to reconstruct climate-driven changes in terrigenous sediment input over time.

Glacial and nonglacial sediment contributions to Wisconsin episode loess in the Central United States

USGS Publications Warehouse

Grimley, D.A.

2000-01-01

The relative contributions of various glacial and nonglacial sediments to Wisconsin Episode loess units along the lower Illinois and central Mississippi Valleys are estimated on the basis of a comparison of magnetic susceptibility and silt and clay mineralogy. A mathematical method of source area calculation, using four compositional parameters, was guided by current knowledge of the regional glacial history. On the basis of this technique, the Roxana Silt, along the Illinois and Mississippi River Valleys, is composed of significant Superior lobe sediment (35%-40%) as well as Wadena or Des Moines lobe sediment (about 35%). This can account for its high magnetic susceptibility, feldspar content, kaolinite content, and pink hue. Lower Peoria Silt contains about 25%-35% Lake Michigan lobe sediment with reduced contributions of the other sources. After the Mississippi River's diversion (20.4 ka), the supply of Superior, Des Moines, and Wadena lobe sediment was cut off from the Illinois Valley in favor of Lake Michigan lobe sediment (75%- 80% contribution). This major source area shift accounts for higher dolomite and illite contents and a more yellow hue in approximately the upper two-thirds of Peoria Silt in the study area. In loess south of St. Louis, less pronounced compositional shifts occur because Superior lobe sediment was not cut off and because Des Moines lobe, Wadena lobe, and Missouri River sediments, having more intermediate composition, compose 40%-50% of the loess, thereby diluting other source area changes. Nonglacial sediment, from fluvial and periglacial sources, is estimated to compose 10%-40% of loess in both regions.

Sediment data sources and estimated annual suspended-sediment loads of rivers and streams in Colorado

USGS Publications Warehouse

Elliott, J.G.; DeFeyter, K.L.

1986-01-01

Sources of sediment data collected by several government agencies through water year 1984 are summarized for Colorado. The U.S. Geological Survey has collected suspended-sediment data at 243 sites; these data are stored in the U.S. Geological Survey 's water data storage and retrieval system. The U.S. Forest Service has collected suspended-sediment and bedload data at an additional 225 sites, and most of these data are stored in the U.S. Environmental Protection Agency 's water-quality-control information system. Additional unpublished sediment data are in the possession of the collecting entities. Annual suspended-sediment loads were computed for 133 U.S. Geological Survey sediment-data-collection sites using the daily mean water-discharge/sediment-transport-curve method. Sediment-transport curves were derived for each site by one of three techniques: (1) Least-squares linear regression of all pairs of suspended-sediment and corresponding water-discharge data, (2) least-squares linear regression of data sets subdivided on the basis of hydrograph season; and (3) graphical fit to a logarithm-logarithm plot of data. The curve-fitting technique used for each site depended on site-specific characteristics. Sediment-data sources and estimates of annual loads of suspended, bed, and total sediment from several other reports also are summarized. (USGS)

Varying sediment sources (Hudson Strait, Cumberland Sound, Baffin Bay) to the NW Labrador Sea slope between and during Heinrich events 0 to 4

USGS Publications Warehouse

Andrews, John T.; Barber, D.C.; Jennings, A.E.; Eberl, D.D.; Maclean, B.; Kirby, M.E.; Stoner, J.S.

2012-01-01

Core HU97048-007PC was recovered from the continental Labrador Sea slope at a water depth of 945 m, 250 km seaward from the mouth of Cumberland Sound, and 400 km north of Hudson Strait. Cumberland Sound is a structural trough partly floored by Cretaceous mudstones and Paleozoic carbonates. The record extends from ∼10 to 58 ka. On-board logging revealed a complex series of lithofacies, including buff-colored detrital carbonate-rich sediments [Heinrich (H)-events] frequently bracketed by black facies. We investigate the provenance of these facies using quantitative X-ray diffraction on drill-core samples from Paleozoic and Cretaceous bedrock from the SE Baffin Island Shelf, and on the < 2-mm sediment fraction in a transect of five cores from Cumberland Sound to the NW Labrador Sea. A sediment unmixing program was used to discriminate between sediment sources, which included dolomite-rich sediments from Baffin Bay, calcite-rich sediments from Hudson Strait and discrete sources from Cumberland Sound. Results indicated that the bulk of the sediment was derived from Cumberland Sound, but Baffin Bay contributed to sediments coeval with H-0 (Younger Dryas), whereas Hudson Strait was the source during H-events 1–4. Contributions from the Cretaceous outcrops within Cumberland Sound bracket H-events, thus both leading and lagging Hudson Strait-sourced H-events.

Fingerprinting of bed sediment in the Tay Estuary, Scotland: an environmental magnetism approach

NASA Astrophysics Data System (ADS)

Jenkins, Pierre A.; Duck, Rob W.; Rowan, John S.; Walden, John

Sediment fingerprinting is commonly used for sediment provenance studies in lakes, rivers and reservoirs and on hillslopes and floodplains. This investigation explores the mixing of terrestrial and marine-derived sediment in the Tay Estuary, Scotland, using mineral magnetic attributes for fingerprinting. Samples representative of the estuary sediments and of four sources (end-members) were subjected to a suite of magnetic susceptibility and remanence measurements. Sediment samples from the beds of the Rivers Tay and Earn represented fluvial inputs while samples from the Angus and Fife coasts represented marine input. Multivariate discriminant and factor analysis showed that the sources could be separated on the basis of six magnetic parameters in a simple multivariate unmixing model to identify source contributions to estuarine bed sediments. Multi-domain magnetite signatures, characteristic of unweathered bedrock, dominate the magnetic measurements. Overall contributions of 3% from the River Earn, 17% from the River Tay, 29% from the Angus coast and 51% from the Fife coast source end-members, demonstrated the present-day regime of marine sediment derivation in the Tay Estuary. However, this conceals considerable spatial variability both along-estuary and in terms of sub-environments, with small-scale variations in sediment provenance reflecting local morphology, particularly areas of channel convergence.

Historical sediment mercury deposition trends for South Dakota lakes

USGS Publications Warehouse

Squillace, Maria K.; Sieverding, Heidi L.; Betemariam, Hailemelekot H.; Urban, Noel R.; Penn, Michael R.; DeSutter, Thomas M.; Chipps, Steven R.; Stone, James J.

2018-01-01

PurposeSelect South Dakota, USA water bodies, including both natural lakes and man-made impoundments, were sampled and analyzed to assess mercury (Hg) dynamics and historical patterns of total Hg deposition.Materials and methodsSediment cores were collected from seven South Dakota lakes. Mercury concentrations and flux profiles were determined using lead (210Pb) dating and sedimentation rates.Results and discussionMost upper lake sediments contained variable heavy metal concentrations, but became more consistent with depth and age. Five of the seven lakes exhibited Hg accumulation fluxes that peaked between 1920 and 1960, while the remaining two lakes exhibited recent (1995–2009) Hg flux spikes. Historical sediment accumulation rates and Hg flux profiles demonstrate similar peak and stabilized values. Mercury in the sampled South Dakota lakes appears to emanate from watershed transport due to erosion from agricultural land use common to the Northern Great Plains.ConclusionsFor sampled South Dakota lakes, watershed inputs are more significant sources of Hg than atmospheric deposition.

Environmental impact of ongoing sources of metal contamination on remediated sediments

DOE PAGES

Knox, Anna Sophia; Paller, Michael H.; Milliken, Charles E.; ...

2016-04-29

One challenge to all remedial approaches for contaminated sediments is the continued influx of contaminants from uncontrolled sources following remediation. We investigated the effects of ongoing contamination in mesocosms employing sediments remediated by different types of active and passive caps and in-situ treatment. Our hypothesis was that the sequestering agents used in active caps and in situ treatment will bind elements (arsenic, chromium, cadmium, cobalt, copper, nickel, lead, selenium, and zinc) from ongoing sources thereby reducing their bioavailability and protecting underlying remediated sediments from recontamination. Most element concentrations in surface water remained significantly lower in mesocosms with apatite and mixedmore » amendment caps than in mesocosms with passive caps (sand), uncapped sediment, and spike solution throughout the 2520 hour experiment. Element concentrations were significantly higher in Lumbriculus variegatus from untreated sediment than in Lumbriculus from most active caps. Moreover, Pearson correlations between element concentrations in Lumbriculus and metal concentrations in the top 2.5 cm of sediment or cap measured by diffusive gradient in thin films (DGT) sediment probes were generally strong (as high as 0.98) and significant (p<0.05) for almost all tested elements. Metal concentrations in both Lumbriculus and sediment/cap were lowest in apatite, mixed amendment, and activated carbon treatments. Finally, these findings show that some active caps can protect remediated sediments by reducing the bioavailable pool of metals/metalloids in ongoing sources of contamination.« less

Contrasts in Sediment Delivery and Dispersal from River Mouth to Accumulation Zones in High Sediment Load Systems: Fly River, Papua New Guinea and Waipaoa River, New Zealand

NASA Astrophysics Data System (ADS)

Ogston, A. S.; Walsh, J. P.; Hale, R. P.

2011-12-01

The relationships between sediment-transport processes, short-term sedimentary deposition, subsequent burial, and long-term accumulation are critical to understanding the morphological development of the continental margin. This study focuses on processes involved in formation and evolution of the clinoform in the Gulf of Papua, Papua New Guinea in which much of the riverine sediment accumulates, and comparison to those processes active off the Waipaoa River, New Zealand that form mid-shelf deposits and export sediment to the slope. In tidally dominated deltas, sediment discharged from the river sources must transit through an estuarine region located within the distributary channels, where particle pathways can undergo significant transformations. Within the distributaries of the Fly River tidally dominated delta, near-bed fluid-mud concentrations were observed at the estuarine turbidity maximum and sediment delivery to the nearshore was controlled by the morphology and gradient of the distributary. El Niño results in anonymously low flow and sediment discharge conditions, which limits transport of sediment from the distributaries to the nearshore zone of temporary storage. Because the sediment stored nearshore feeds the prograding clinoform, this perturbation propagates throughout the dispersal system. In wave-dominated regions, transport mechanisms actively move sediment away from the river source, separating the site of deposition and accumulation from the river mouth. River-flood and storm-wave events each create discrete deposits on the Waipaoa River shelf and data has been collected to determine their form, distribution, and relationship to factors such as flood magnitude or wave energy. In this case, transport pathways appear to be influenced by structurally controlled shelf bathymetry. In both cases, the combined fluvial and marine processes can initiate and maintain gravity-driven density flows, and although their triggers and controls differ vastly, these flows play a significant role in the morpholigcal development of the continental margin. These sites, synthesized with examples from multiple other environments, provide a basis for understanding the interactions between physical processes responsible for the transport of sediment from river mouths to the sites of ultimate deposition.

Suspended sediment fluxes in a tidal wetland: Measurement, controlling factors, and error analysis

USGS Publications Warehouse

Ganju, N.K.; Schoellhamer, D.H.; Bergamaschi, B.A.

2005-01-01

Suspended sediment fluxes to and from tidal wetlands are of increasing concern because of habitat restoration efforts, wetland sustainability as sea level rises, and potential contaminant accumulation. We measured water and sediment fluxes through two channels on Browns Island, at the landward end of San Francisco Bay, United States, to determine the factors that control sediment fluxes on and off the island. In situ instrumentation was deployed between October 10 and November 13, 2003. Acoustic Doppler current profilers and the index velocity method were employed to calculate water fluxes. Suspended sediment concentrations (SSC) were determined with optical sensors and cross-sectional water sampling. All procedures were analyzed for their contribution to total error in the flux measurement. The inability to close the water balance and determination of constituent concentration were identified as the main sources of error; total error was 27% for net sediment flux. The water budget for the island was computed with an unaccounted input of 0.20 m 3 s-1 (22% of mean inflow), after considering channel flow, change in water storage, evapotranspiration, and precipitation. The net imbalance may be a combination of groundwater seepage, overland flow, and flow through minor channels. Change of island water storage, caused by local variations in water surface elevation, dominated the tidalty averaged water flux. These variations were mainly caused by wind and barometric pressure change, which alter regional water levels throughout the Sacramento-San Joaquin River Delta. Peak instantaneous ebb flow was 35% greater than peak flood flow, indicating an ebb-dominant system, though dominance varied with the spring-neap cycle. SSC were controlled by wind-wave resuspension adjacent to the island and local tidal currents that mobilized sediment from the channel bed. During neap tides sediment was imported onto the island but during spring tides sediment was exported because the main channel became ebb dominant Over the 34-d monitoring period 14,000 kg of suspended sediment were imported through the two channels. The water imbalance may affect the sediment balance if the unmeasured water transport pathways are capable of transporting large amounts of sediment. We estimate a maximum of 2,800 kg of sediment may have been exported through unmeasured pathways, giving a minimum net import of 11,200 kg. Sediment flux measurements provide insight on tidal to fortnightly marsh sedimentation processes, especially in complex systems where sedimentation is spatially and temporally variable. ?? 2005 Estuarine Research Federation.

Statistical assessment to magnetic susceptibility and heavy metal data for characterizing the coastal sediment of East coast of Tamilnadu, India.

PubMed

Harikrishnan, N; Chandrasekaran, A; Ravisankar, R; Alagarsamy, R

2018-05-01

A rapid urbanization and industrialization enhances the significant heavy metal pollution in the sediments of coastal area and introduced a serious threat to the human health. In the present study, concentration of heavy metals such as Al, Ti, Fe, V, Cr, Mn, Co, Zn, La, Pb, Mg, Ca, Ni, Cd and Ba are determined in sediments along Periyakalapet to Parangaipettai coastal area, Tamilnadu using energy dispersive X-ray fluorescence spectrometer (EDXRF).These metals have more affinity to establish metallic bond with ferrous material leading to enhancement of sediment magnetic susceptibility. Hence, a magnetic susceptibility (χLF, χHF, χFD) measurement was carried for sediments by using MS2B dual frequency susceptibility meter. Multivariate statistical analysis (Pearson correlation, factor and cluster analysis) was carried out between heavy metals and magnetic susceptibility to assess the anthropogenic impact in the sediments. The study revealed that a magnetic susceptibility measurement is an inexpensive, fast, non-destructive and suitable method to identify the heavy metal pollution sources. Copyright © 2018 Elsevier Ltd. All rights reserved.

Fine sediment sources in conservation effects assessment project watersheds

USDA-ARS?s Scientific Manuscript database

Two naturally occurring radionuclides, 7Be and 210Pbxs , were used as tracers to discriminate eroded surface soils from channel-derived sediments in the fine suspended sediment loads of eight Conservation Effects Assessment Project (CEAP) benchmark watersheds. Precipitation, source soils, and suspe...

The Response of Sediments and Dissolved Organic Matter to Rapid Rainfall in the Santa Maria da Vitoria Watershed, Espírito Santo, BR

NASA Astrophysics Data System (ADS)

Ward, N. D.; Firme de Almeida, L.; Dias, G.; Gould, R.; Tan, A.; Bianchi, T. S.; Krusche, A. V.; Keil, R. G.; Richey, J. E.

2015-12-01

The Santa Maria da Vitória River supplies over 30% of the water for the greater Vitória, Espírito Santo, BR metropolitan area, which has a population of roughly 1.6 million people. The availability of clean freshwater is severely limited during periods of heavy rainfall because water sanitation facilities are "clogged" by high sediment discharge. The headwaters of the Santa Maria da Vitória River are characterized by relatively pristine forested environments, transitioning into primarily agricultural and rural land uses, and finally reaching the large urban center of Vitória near its marine receiving waters. The discharge of suspended sediments and dissolved organic matter (DOM) was examined at a 3 hour frequency during heavy storm flows from October 2013 to May 2015 in the Santa Maria da Vitória River main channel and a small tributary, the Mangaraí River. Bulk isotopic analyses were used to determine potential sediment sources and whether specific landscape/land use features were functionalized during periods of high runoff. Likewise, time of flight mass spectrometry (GC-ToF-MS) was used to identify a broad suite of DOM compounds that responded positively with river discharge in an effort to determine the influence of land use on the delivery of dissolved components to the river. For example, the abundance of compounds related to specific agricultural settings increased during storm flow along with anthropogenic DOM sources such as plasticizer and pesticide-derived compounds. Suspended sediment concentrations increased by as much as 70 times during peak river discharge relative to base flow several days earlier with similar increases in particulate organic carbon and nitrogen observed. Results from this study and previous field measurements were integrated into a coupled hydrology-sediment transport model, DHSVM, as part of a dynamic information framework with the goal of predicting water/sediment discharge to inform management and policy sectors of the state of Espírito Santo.

Chemical data and lead isotopic compositions of geochemical baseline samples from streambed sediments and smelter slag, lead isotopic compositions in fluvial tailings, and dendrochronology results from the Boulder River watershed, Jefferson County, Montana

USGS Publications Warehouse

Unruh, Daniel M.; Fey, David L.; Church, Stan E.

2000-01-01

IntroductionAs a part of the U.S. Geological Survey Abandoned Mine Lands Initiative, metal-mining related wastes in the Boulder River study area in northern Jefferson County, Montana, have been evaluated for their environmental effects. The study area includes a 24-km segment of the Boulder River in and around Basin, Montana and three principal tributaries to the Boulder River: Basin Creek, Cataract Creek, and High Ore Creek. Mine and prospect waste dumps and mill wastes are located throughout the drainage basins of these tributaries and in the Boulder River. Mine-waste material has been transported into and down streams, where it has mixed with and become incorporated into the streambed sediments. In some localities, mine waste material was placed directly in stream channels and was transported downstream forming fluvial tailings deposits along the stream banks. Water quality and aquatic habitat have been affected by trace-element-contaminated sediment that moves from mine wastes into and down streams during snowmelt and storm runoff events within the Boulder River watershed.Present-day trace element concentrations in the streambed sediments and fluvial tailings have been extensively studied. However, in order to accurately evaluate the impact of mining on the stream environments, it is also necessary to evaluate the pre-mining trace-element concentrations in the streambed sediments. Three types of samples have been collected for estimation of pre-mining concentrations: 1) streambed sediment samples from the Boulder River and its tributaries located upstream from historical mining activity, 2) stream terrace deposits located both upstream and downstream of the major tributaries along the Boulder River, and 3) cores through sediment in overbank deposits, in abandoned stream channels, or beneath fluvial tailings deposits. In this report, we present geochemical data for six stream-terrace samples and twelve sediment-core samples and lead isotopic data for six terrace and thirteen core samples. Sample localities are in table 1 and figures 1 and 2, and site and sample descriptions are in table 2.Geochemical data have been presented for cores through fluvial tailings on High Ore Creek, on upper Basin Creek, and on Jack Creek and Uncle Sam Gulch. Geochemical and lead isotopic data for modern streambed-sediment samples have been presented by Fey and others.Lead isotopic determinations in bed sediments have been shown to be an effective tool for evaluating the contributions from various sources to the metals in bed sediments. However, in order to make these calculations, the lead isotopic compositions of the contaminant sources must also be known. Consequently, we have determined the lead isotopic compositions of five streambed-sediment samples heavily contaminated with fluvial mine waste immediately downstream from large mines in the Boulder River watershed in order to determine the lead isotopic signatures of the contaminants. Summary geochemical data for the contaminants are presented here and geochemical data for the streambed-sediment samples are given by Fey and others.Downstream from the Katie mill site and Jib tailings, fluvial deposits of mill tailings are present on a 10-m by 50-m bar in the Boulder River below the confluence with Basin Creek. The source of these tailings is not known, but fluvial tailings are also present immediately downstream from the Katie mill site, which is immediately upstream from the confluence with Basin Creek. Nine cores of fluvial tailings from this bar were analyzed.Dendrochronology samples were taken at several stream terrace localities to provide age control on the stream terrace deposits. Trees growing on the surfaces of stream terraces provide a minimum age for the terrace deposits, although floods subsequent to the trees' growth could have deposited post-mining overbank deposits around the trees. Historical data were also used to provide estimates of minimum ages of cultural features and to bracket the age of events.

Quantifying sources of fine sediment supplied to post-fire debris flows using fallout radionuclide tracers

NASA Astrophysics Data System (ADS)

Smith, Hugh G.; Sheridan, Gary J.; Nyman, Petter; Child, David P.; Lane, Patrick N. J.; Hotchkis, Michael A. C.; Jacobsen, Geraldine E.

2012-02-01

Fine sediment supply has been identified as an important factor contributing to the initiation of runoff-generated debris flows after fire. However, despite the significance of fines for post-fire debris flow generation, no investigations have sought to quantify sources of this material in debris flow affected catchments. In this study, we employ fallout radionuclides ( 137Cs, 210Pb ex and 239,240Pu) as tracers to measure proportional contributions of fine sediment (< 10 μm) from hillslope surface and channel bank sources to levee and terminal fan deposits formed by post-fire debris flows in two forest catchments in southeastern Australia. While 137Cs and 210Pb ex have been widely used in sediment tracing studies, application of Pu as a tracer represents a recent development and was limited to only one catchment. The ranges in estimated proportional hillslope surface contributions of fine sediment to individual debris flow deposits in each catchment were 22-69% and 32-74%. The greater susceptibility of 210Pb ex to apparent reductions in the ash content of channel deposits relative to hillslope sources resulted in its exclusion from the final analysis. No systematic change in the proportional source contributions to debris flow deposits was observed with distance downstream from channel initiation points. Instead, spatial variability in source contributions was largely influenced by the pattern of debris flow surges forming the deposits. Linking the tracing analysis with interpretation of depositional evidence allowed reconstruction of temporal sequences in sediment source contributions to debris flow surges. Hillslope source inputs dominated most elevated channel deposits such as marginal levees that were formed under peak flow conditions. This indicated the importance of hillslope runoff and fine sediment supply for debris flow generation in both catchments. In contrast, material stored within channels that was deposited during subsequent surges was predominantly channel-derived. The results demonstrate that fallout radionuclide tracers may provide unique information on changing source contributions of fine sediment during debris flow events.

Cadmium Isotope Fractionation of the Surface Waters in a Mining Area Impacted by Acid Mine Drainage

NASA Astrophysics Data System (ADS)

Yang, W.; Chen, Y.; Tang, Y.

2016-12-01

The pollution of natural waters and sediments with metals derived from acid mine drainage (AMD) is a global environmental problem. However, the processes governing the behaviors of transportation and transformation of metals like Cd in mountain area are poorly understood, the complicated hydro-geomorphic settings of mountain catchments are difficult to access . And few reports have been reported about the effects of. In this study, the concentration and the isotopic composition of Cd selected filtered stream samples from the Hengshi river affected by AMD have been determined. The Cd concentrations were determined for collected sediments samples, which cover the entire river valley from upstream to the downstream regions. Results showed that reducing concentrations for Cd were found in the river water from upstream to downstream, and also high enrichment factor for Cd in all the sediments, suggest that Cd mainly is derived from Liwu dam and easily enter into solid phase. The isotopic data show that the dissolved Cd in rivers is characterized by δ114/110Cd, ranged from 0.09 ‰ to 0.40 ‰ in term of δ114/110Cd , the mean is 0.25 ± 0.06 ‰, and the content of Cd from the sediments is 0.18 to 39.85 μg/g. The river isotope values are similar to the isotope signature of Liwu dam, which contain significant amounts of contaminants under a deep water cover, such as mine tailings, sulfide-rich rocks and minerals. Large fractionated Cd (δ114/110Cd = 0.40 ± 0.09 ‰) was found in water sample collected from midstream near a farmland, which imply there is a new source different from the LIWU dam depend on the heavier Cd signature. We hypothesize that this shift results from either hydrology changes over time in the main and tributaries stream, and some new pollution source imported. The change in the behavior of sorption of cadmium on oxides and hydroxides in the sediment system under low pH cause indistinguishable fractionation. Our result is encouraging for application of Cd isotopes as a novel tracer for identifying and tracking metal sources and attenuation mechanisms in mountain watersheds.

Sorting of Terrestrial and Marine Organic Matter along a Marginal Submarine Canyon: Radiocarbon and Biomarker Signatures of Surface Sediments

NASA Astrophysics Data System (ADS)

Close, H. G.; Doherty, S.; Campbell, P.; McCarthy, M. D.; Prouty, N.

2016-02-01

Submarine canyons are incised features of many continental margins that can have significant influence on the hydrodynamic distribution of sediments and organic matter (OM) eroded and deposited from the continents. Baltimore Canyon, on the U.S. mid-Atlantic margin, contains a complex set of sedimentary processes that simultaneously create unique benthic habitats and control the deposition of OM. Along the canyon axis, loci of net erosion, net deposition, and intense winnowing each host diverse faunal assemblages and varying mixtures of sedimentary OM derived both from production in the overlying water column and from mobilized sediments. Bioavailable components of this deposited OM sustain benthic communities, while recalcitrant components can contribute to long-term carbon burial in the deep sea. Here we probe in detail the terrestrial versus marine origins of OM along a transect of Baltimore Canyon, as well as its bioavailability for benthic fauna, in order to explore how canyon-specific sediment dynamics might emplace a functional sorting of OM from shelf to open ocean. Determining the provenance of sedimentary OM is a continual challenge: commonly-measured bulk geochemical properties often provide insufficient information to distinguish end-member sources. We present a novel approach to separate functional classes of OM and investigate sources and degradative pathways of OM in Baltimore Canyon. In combination with bulk geochemical characteristics, surface sediments from water depths of 200-1200 meters were sequentially extracted (solvent-extracted, acid-hydrolyzed, and demineralized) to separate pools containing different prevalence of terrigenous, marine, and recalcitrant OM. Each class was analyzed for biomarker distributions; amino acid content, 13C signatures, and degradation indicators; bulk carbon and nitrogen isotopes; and radiocarbon content in order to characterize potential end-member sources within the mixture, as well as their age profiles. These geochemical properties were contextualized with accompanying sedimentological and ecological data. Results highlight the importance of coastal proximity, canyon morphology, and local hydrodynamics in determining the bioavailability of benthic organic matter and its potential for long-term carbon burial.

Holocene and late glacial palaeoceanography and palaeolimnology of the Black Sea: Changing sediment provenance and basin hydrography over the past 20,000 years

USGS Publications Warehouse

Piper, David Z.; Calvert, S.E.

2011-01-01

The elemental geochemistry of Late Pleistocene and Holocene sediments of the Black Sea, recovered in box cores from the basin margins and a 5-m gravity core from the central abyssal region of the basin, identifies two terrigenous sediment sources over the last 20 kyrs. One source region includes Anatolia and the southern Caucasus; the second region is the area drained by rivers entering the Black Sea from Eastern Europe. Alkali metal:Al and heavy:light rare-earth element ratios reveal that the relative contribution of the two sources shifted abruptly every few thousand years during the late glacial and early Holocene lacustrine phase of the basin. The shifts in source were coeval with changes in the lake level as determined from the distribution of quartz and the heavy mineral-hosted trace elements Ti and Zr.The geochemistry of the abyssal sediments further recorded a sequence of changes to the geochemistry of the water column following the lacustrine phase, when high salinity Mediterranean water entered the basin beginning 9.3 kyrs BP. Bottom water that had been oxic throughout the lake phase became anoxic at approximately 8.4 kyrs BP, as recorded by the accumulation from the water column of several redox-sensitive trace metals (Mo, Re, U). The accumulation of organic carbon and several trace nutrients (Cd, Cu, Ni, Zn) increased sharply ca. 0.4 kyrs later, at 8.0 kyrs BP, reflecting an increase of primary productivity. Its increase was coeval with a shift in the dinoflagellate ecology from stenohaline to euryhaline assemblages. During this profound environmental change from the lacustrine to the marine phase, the accumulation rate of the lithogenous sediment fraction decreased as much as 10-fold in response to the rise of the water level in the basin from a low stand ca. 9.3 ka to its current level.

Holocene and late glacial palaeoceanography and palaeolimnology of the Black Sea: Changing sediment provenance and basin hydrography over the past 20,000 years

USGS Publications Warehouse

Piper, D.Z.; Calvert, S.E.

2011-01-01

The elemental geochemistry of Late Pleistocene and Holocene sediments of the Black Sea, recovered in box cores from the basin margins and a 5-m gravity core from the central abyssal region of the basin, identifies two terrigenous sediment sources over the last 20. kyrs. One source region includes Anatolia and the southern Caucasus; the second region is the area drained by rivers entering the Black Sea from Eastern Europe. Alkali metal:Al and heavy:light rare-earth element ratios reveal that the relative contribution of the two sources shifted abruptly every few thousand years during the late glacial and early Holocene lacustrine phase of the basin. The shifts in source were coeval with changes in the lake level as determined from the distribution of quartz and the heavy mineral-hosted trace elements Ti and Zr. The geochemistry of the abyssal sediments further recorded a sequence of changes to the geochemistry of the water column following the lacustrine phase, when high salinity Mediterranean water entered the basin beginning 9.3. kyrs BP. Bottom water that had been oxic throughout the lake phase became anoxic at approximately 8.4. kyrs BP, as recorded by the accumulation from the water column of several redox-sensitive trace metals (Mo, Re, U). The accumulation of organic carbon and several trace nutrients (Cd, Cu, Ni, Zn) increased sharply ca. 0.4. kyrs later, at 8.0. kyrs BP, reflecting an increase of primary productivity. Its increase was coeval with a shift in the dinoflagellate ecology from stenohaline to euryhaline assemblages. During this profound environmental change from the lacustrine to the marine phase, the accumulation rate of the lithogenous sediment fraction decreased as much as 10-fold in response to the rise of the water level in the basin from a low stand ca. 9.3. ka to its current level.

Sources of polycyclic aromatic hydrocarbons in sediments of the Bharalu River, a tributary of the River Brahmaputra in Guwahati, India.

PubMed

Hussain, Karishma; Balachandran, S; Rafiqul Hoque, Raza

2015-12-01

Analysis of riverine sediments offers important information regarding anthropogenic activities in the adjacent watershed. In this study, we provide polycyclic aromatic hydrocarbon (PAH) levels, their possible sources and potential hazards in the Bharalu tributary of the Brahmaputra River flowing through Guwahati city in India. The USEPA's 16 priority PAHs were determined in river bank sediments during two distinct seasons viz. pre- and post-monsoon. The ∑PAHs concentrations varied between 338 and 23,100 ng g(-1) during post-monsoon and between 609 and 8620 ng g(-1) during pre-monsoon. Mean benzo(a)pyrene (BaP) levels were between 17.8 ± 12 and 21.9 ± 27 ng g(-1) during post- and pre-monsoon seasons respectively. Spatial variations were observed. Interestingly, bank sediment samples from the sites near the confluence of the Bharalu River with the Brahmaputra River were found to have maximum concentrations of PAHs during post-monsoon season. The profile of the PAHs was dominated by 3-, 4- and 6-ring compounds. We estimated hazards of PAHs as RQ∑PAHs, which showed seasonal variation: 3 times higher during post-monsoon than pre-monsoon. 3-and 4-ring PAHs were the major PAHs of concern. The Bharalu River sediment was found to pose medium to high hazards to ecosystem. The individual PAHs including Acy, Phen and Pyr were observed with RQ(MPCs) value >1 indicating severe hazards during post-monsoon and pre-monsoon season. A very high percentage of coefficient of variation (CV) for PAHs during post-monsoon also revealed great variation in hazards and sources in this season. The diagnostic ratios indicated both petrogenic and pyrogenic origin of the PAHs. The pyrogenic contributions were mainly attributed to emissions from diesel, gasoline and wood combustion which are mainly from anthropogenic sources. Copyright © 2015 Elsevier Inc. All rights reserved.

[Sources, pollution statue and potential ecological risk of heavy metals in surface sediments of Aibi Lake, Northwest China].

PubMed

Zhang, Zhao-Yong; Abuduwaili, Jilili; Jiang, Feng-Qing

2015-02-01

In this paper, the surface sediment samples were harvested from Aibi Lake, and total contents of 8 heavy metals ( Cu, Pb, Zn, As, Hg, Cr, Ni and Cd) were determined. Then the sources, pollution statue, and potential ecological risk were analyzed by using multiple analysis methods. The results show that: (1) The order of the skewness for these 8 heavy metals is: Hg > Cd > Pb > Zn > As > Cu > Cr > Ni. (2) Multivariate statistical analysis shows that 8 heavy metals can be classified to 2 principle components, among which PC1 ( Cd, Pb, Hg and Zn) is man-made source factor and mainly came from all kinds of waste of agriculture; PC2 ( Cu, Ni, Cr and As) is natural source and was mainly controlled by the background of the natural geography of this area. (3) Accumulation of index evaluation results show that the order of pollution degree values of 8 heavy metals in surface sediments of Aibi Lake is: Cd > Hg > Pb > Zn > As > Cu > Ni > Cr. In all samples, heavy metals Hg, Cd and Pb all belong to low and partial moderate pollution statue, while Zn, As, Cr, Ni and Cu belong to no pollution statue in majority samples. (4) Potential ecological risk assessment results show that the potential ecological risk of heavy metals in surface sediments of Aibi Lake mainly caused by Cd, Hg and Pb, and they accounting for 42.6%, 28.6% and 24.0% of the total amount, respectively, among which Cd is the main ecological risk factor, followed by Hg and Pb. In all samples, the potential ecological risk index values (RI) of 8 heavy metals are all lower than 150, and they are all at low ecological risk levels. However, this research also shows that there have high content of Cd and Pb in the sediment. Therefore, we should make long-term monitoring of the lake environment.

Organic carbon accumulation and reactivity in central Swedish lakes during the Holocene

NASA Astrophysics Data System (ADS)

Chmiel, H.; Kokic, J.; Niggemann, J.; Dittmar, T.; Sobek, S.

2012-04-01

Sedimentation and burial of particulate organic carbon (POC), received from terrestrial sources and from lake internal primary production, are responsible for the progressive accumulation and long-term storage of organic matter in lake basins. For lakes in the boreal zone of central Sweden it can be presumed, that the onset of POC accumulation occurred during the early Holocene (˜8000 BP.) after the retreat of the Scandinavian ice sheet. In this study we investigated carbon mass accumulation rates (CMARs), as well as sources and reactivity of deposited organic material, for seven lakes in central Sweden (60°N, 15°E), in order to obtain a detailed temporal resolution of carbon burial and preservation in boreal lakes. Sediment long-cores were sampled in March 2011 from the ice, and CMARs were calculated from water contents, dry bulk densities, carbon contents and radiocarbon (14C) ages of the depth profiles. To indicate the sources of the organic material and characterize its diagenetic state, we determined carbon-nitrogen ratios (C/N) as well as amounts and compositions of lignin phenols. The transitions from organic rich sediment layers to glacial till deposits were found to be in sediment depths of ˜3 m in each lake. POC contents were on average highest (25-34 wt. % C), in small lakes (≤ 0.07 km2) and lowest (10-18 wt. % C) in the larger lakes (≥ 165 km2). The CMARs over the Holocene showed significant variations and were on average lower in the early Holocene, compared to recent accumulation rates. C/N values and the composition of lignin phenols further provided indications of important changes in organic matter source and reactivity over the Holocene. In summary, our data suggest that boreal lake sediments were a significantly stronger sink for organic carbon during the last ~150 years than during earlier periods of the Holocene.

Possible Food Sources of Macrozoobenthos in the Manko Mangrove Ecosystem, Okinawa (Japan): A Stable Isotope Analysis Approach

PubMed Central

Wardiatno, Yusli; Mardiansyah; Prartono, Tri; Tsuchiya, Makoto

2015-01-01

Identifying potential food sources in mangrove ecosystems is complex because of the multifarious inputs from both land and sea. This study, which was conducted in the Manko mangrove ecosystem of Okinawa, Japan, determined the composition of the stable isotopes δ13C and δ15N in primary producers and macrozoobenthos to estimate the potential food sources assimilated and to elucidate the target trophic levels of the macrozoobenthos. We measured the two stable isotope signatures of three gastropods (Cerithidea sp., Cassidula mustelina, Peronia verruculata), two crabs (Grapsidae sp., Uca sp.), mangrove tree (Kandelia candel) leaves, and sediment from the mangrove ecosystem. The respective carbon and nitrogen isotope signature results were as follows: −22.4‰ and 8.6‰ for Cerithidea sp., −25.06‰ and 8‰ for C. mustelina, −22.58‰ and 8‰ for P. verruculata, −24.3‰ and 10.6‰ for unidentified Grapsidae, −21.87 ‰ and 11.5 ‰ for Uca sp., −29.81‰ and 11‰ for K. candel, and −24.23‰ and 7.2‰ for the sediment. The stable isotope assimilation signatures of the macrozoobenthos indicated sediment as their food source. Considering the trophic levels, the stable isotope values may also indicate that the five macrozoobenthos species were secondary or higher consumers. PMID:26019747

Air-Seawater Exchange of Organochlorine Pesticides along the Sediment Plume of a Large Contaminated River.

PubMed

Lin, Tian; Guo, Zhigang; Li, Yuanyuan; Nizzetto, Luca; Ma, Chuanliang; Chen, Yingjun

2015-05-05

Gaseous exchange fluxes of organochlorine pesticides (OCPs) across the air-water interface of the coastal East China Sea were determined in order to assess whether the contaminated plume of the Yangtze River could be an important regional source of OCPs to the atmosphere. Hexachlorocyclohexanes (HCHs), chlordane compounds (CHLs), and dichlorodiphenyltrichloroethanes (DDTs) were the most frequently detected OCPs in air and water. Air-water exchange was mainly characterized by net volatilization for all measured OCPs. The net gaseous exchange flux ranged 10-240 ng/(m2·day) for γ-HCH, 60-370 ng/(m2·day) for trans-CHL, 97-410 ng/(m2·day) for cis-CHL, and ∼0 (e.g., equilibrium) to 490 ng/(m2·day) for p,p'-DDE. We found that the plume of the large contaminated river can serve as a significant regional secondary atmospheric source of legacy contaminants released in the catchment. In particular, the sediment plume represented the relevant source of DDT compounds (especially p,p'-DDE) sustaining net degassing when clean air masses from the open ocean reached the plume area. In contrast, a mass balance showed that, for HCHs, contaminated river discharge (water and sediment) plumes were capable of sustaining volatilization throughout the year. These results demonstrate the inconsistencies in the fate of HCHs and DDTs in this large estuarine system with declining primary sources.

A great volcanic eruption around AD 1300 recorded in lacustrine sediment from Dongdao Island, South China Sea

NASA Astrophysics Data System (ADS)

Yang, Zhongkang; Long, Nanye; Wang, Yuhong; Zhou, Xin; Liu, Yi; Sun, Liguang

2017-02-01

The contents of Ti, Al and Fe 2 O 3 in a lacustrine sediment core (DY6) collected from Dongdao Island, South China Sea (SCS), were determined to be much higher than those in the three major sediment end-members (coral sand, guano and plants), and their likely sources include terrigenous dust and volcanic ash. At 61 cm (˜AD 1300), the contents of Ti, Al and Fe 2 O 3 have an abnormally high spike, which cannot be explained by terrigenous dust. The Sr and Nd isotope compositions at 61 cm are in excellent agreement with those in volcanic materials, but they are significantly different from those in terrigenous dust, implying a possible material input from historical volcanic eruptions in the lacustrine sediment DY6. The documented great Samalas volcanic eruption at AD 1257 in Indonesia is likely the candidate for this volcanic eruption.

Dust fluxes linked to intensification of Prevailing Westerlies and Trade Winds stimulated Ethmodiscus rex giant diatom blooms in the southern Mariana Trench, western tropical Pacific at onset of the Last Glacial Maximum

NASA Astrophysics Data System (ADS)

Chen, D.; Luo, M.; Algeo, T. J.; Chen, L.

2017-12-01

The strontium (Sr) and neodymium (Nd) isotope compositions and clay-mineral assemblages of the detrital fraction of sediments in the southern Mariana Trench together with major- and trace-elements concentrations of bulk sediments have been determined to trace the sediment provenance and investigate the relationship between Asian dust input and blooms of the giant diatom Ethmodiscus rex. Enrichment of barium (Ba) in relative to upper continental crust (UCC) and low average Rb/K ratios in all study cores point to both hydrothermal and volcaniclastic inputs to the sediments. Both the Sr-Nd isotope compositions and the clay-mineral assemblages of the detrital fraction reflect a two-component mixing system consisting of Mariana arc volcaniclastics and eolian Asian dust. A decrease in smectite content and an increase in illite content just before formation of laminated diatom mats (LDMs) suggest a change in the source of the eolian dust from eastern Asian deserts (EADs) to central Asian deserts (CADs) at the onset of the Last Glacial Maximum (LGM). This observation suggests a causal linkage between atmospheric circulation patterns, the sources of eolian Asian dust, and marine productivity in the western Pacific region. We postulate that the shift to CAD-sourced dust may have played a greater role in promoting biological productivity in the oligotrophic western Pacific Ocean during the LGM than previously realized.

The geologic records of dust in the Quaternary

USGS Publications Warehouse

Muhs, Daniel R.

2013-01-01

Study of geologic records of dust composition, sources and deposition rates is important for understanding the role of dust in the overall planetary radiation balance, fertilization of organisms in the world’s oceans, nutrient additions to the terrestrial biosphere and soils, and for paleoclimatic reconstructions. Both glacial and non-glacial processes produce fine-grained particles that can be transported by the wind. Geologic records of dust flux occur in a number of depositional archives for sediments: (1) loess deposits; (2) lake sediments; (3) soils; (4) deep-ocean basins; and (5) ice sheets and smaller glaciers. These archives have several characteristics that make them highly suitable for understanding the dynamics of dust entrainment, transport, and deposition. First, they are often distributed over wide geographic areas, which permits reconstruction of spatial variation of dust flux. Second, a number of dating methods can be applied to sediment archives, which allows identification of specific periods of greater or lesser dust flux. Third, aeolian sediment particle size and composition can be determined so that dust source areas can be ascertained and dust transport pathways can be reconstructed. Over much of the Earth’s surface, dust deposition rates were greater during the last glacial period than during the present interglacial period. A dustier Earth during glacial periods is likely due to increased source areas, greater aridity, less vegetation, lower soil moisture, possibly stronger winds, a decreased intensity of the hydrologic cycle, and greater production of dust-sized particles from expanded ice sheets and glaciers.

Occurrence and possible sources of arsenic in seafloor sediments surrounding sea-disposed munitions and chemical agents near O´ahu, Hawai´i

NASA Astrophysics Data System (ADS)

Tomlinson, Michael S.; De Carlo, Eric Heinen

2016-06-01

The Department of Defense disposed of conventional and chemical munitions as well as bulk containers of chemical agents in US coastal waters including those surrounding the State of Hawai´i. The Hawai´i Undersea Military Munitions Assessment has been collecting biota, water, and sediment samples from two disposal areas south of the island of O´ahu in waters 500 to 600 m deep known to have received both conventional munitions and chemical agents (specifically sulfur mustard). Unlike a number of other sea-disposed munitions investigations which used grabs or corers lowered from surface vessels, we used manned submersibles to collect the samples. Using this approach, we were able to visually identify the munitions and precisely locate our samples in relation to the munitions on the seafloor. This paper focuses on the occurrence and possible sources of arsenic found in the sediments surrounding the disposed military munitions and chemical agents. Using nonparametric multivariate statistical techniques, we looked for patterns in the chemical data obtained from these sediment samples in order to determine the possible sources of the arsenic found in these sediments. The results of the ordination technique nonmetric multidimensional scaling indicate that the arsenic is associated with terrestrial sources and not munitions. This was not altogether surprising given that: (1) the chemical agents disposed of in this area supposedly did not contain arsenic, and (2) the disposal areas studied were under terrestrial influence or served as dredge spoil disposal sites. The sediment arsenic concentrations during this investigation ranged from <1.3 to 40 mg/kg-dry weight with the lower concentrations typically found around control sites and munitions (not located in dredge disposal areas) and the higher values found at dredge disposal sites (with or without munitions). During the course of our investigation we did, however, discover that mercury appears to be loosely associated with munitions. Given that mercury contamination has been seen in about 20% of the munitions and ton containers of sulfur mustard, the association of mercury with chemical agents is not totally unexpected.

Assessment of heavy metal pollution, distribution and source apportionment in the sediment from Feni River estuary, Bangladesh.

PubMed

Islam, Md Saiful; Hossain, M Belal; Matin, Abdul; Islam Sarker, Md Shafiqul

2018-07-01

Heavy metal pollution in sediment resources may pose serious threat to ecosystem and human health through food web. In this study, surface sediment samples of 10 stations along the Feni River estuary were analyzed to profile the accumulation, sources and pollution levels of heavy metals. The results revealed that the average contents (μg g -1 ) of eight selected heavy metals followed the order of Mn (37.85) > Cr (35.28) > Ni (33.27) > Co (31.02) > Pb (6.47) > Ag (1.09) > As (0.85) > Hg (0.71), and the concentrations varied spatially and seasonally with relatively higher levels at upward stations and during the rainy season. According to sediment quality guidelines (SQGs), the sediment samples were heavily contaminated with Ag and Hg, and moderately with Co. Threshold effect concentration (TEC) and probable effect concentration (PEC) values indicated that the concentration of only Ni and Cr were likely to occasionally exhibit adverse effects on the ecosystem. Enrichment factor (EF), geo-accumulation index (I geo ) and contamination factor (CF) analyses revealed that Ag, Co and Hg were at moderate to high pollution levels and the rests (As, Cr, Ni, Pb and Mn) were at no to low pollution levels. Potential ecological risk index (PERI) also showed that Ag, Co and Hg were the most potential ecological risk factor being determined in this studied area. Correlation matrix combined with multivariate principal component analysis and cluster analysis suggest that Ag, Co, Ni and Hg originated from anthropogenic sources (agrochemicals, silver nanoparticles anti-microbial agent, silver plating), whereas As, Cr, Pb and Mn primarily originated from natural geological background. Copyright © 2018 Elsevier Ltd. All rights reserved.

Stable lead isotopic analyses of historic and contemporary lead contamination of San Francisco Bay estuary

USGS Publications Warehouse

Ritson, P.I.; Bouse, R.M.; Flegal, A.R.; Luoma, S.N.

1999-01-01

Variations in stable lead isotopic composition (240Pb, 206Pb, 207Pb, 208Pb) in three sediment cores from the San Francisco Bay estuary document temporal changes in sources of lead during the past two centuries. Sediment, with lead from natural geologic sources, and relatively homogeneous lead isotopic compositions are overlain by sediments whose isotopic compositions indicate change in the sources of lead associated with anthropogenic modification of the estuary. The first perturbations of lead isotopic composition in the cores occur in the late 1800s concordant with the beginning of industrialization around the estuary. Large isotopic shifts, toward lower 206Pb/207Pb, occur after the turn of the century in both Richardson and San Pablo Bays. A similar relationship among lead isotopic compositions and lead concentrations in both Bays suggest contamination from the same source (a lead smelter). The uppermost sediments (post 1980) of all cores also have a relatively homogenous lead isotopic composition distinct from pre-anthropogenic and recent aerosol signatures. Lead isotopic compositions of leachates from fourteen surface sediments and five marsh samples from the estuary were also analyzed. These analyses suggest that the lead isotopic signature identified in the upper horizons of the cores is spatially homogeneous among recently deposited sediments throughout the estuary. Current aerosol lead isotopic compositions [Smith, D.R., Niemeyer, S., Flegal, A.R., 1992. Lead sources to California sea otters: industrial inputs circumvent natural lead biodepletion mechanisms. Environmental Research 57, 163-175] are distinct from the isotopic compositions of the surface sediments, suggesting that the major source of lead is cycling of historically contaminated sediments back through the water column. Both the upper core sediments and surface sediments apparently derive their lead predominantly from sources internal to the estuary. These results support the idea that geochemical cycling of lead between sediments and water accounts for persistently elevated lead concentrations in the water column despite 10-fold reduction of external source inputs to San Francisco Bay [Flegal, A.R., Rivera-Duarte, I., Ritson, P.I., Scelfo, G., Smith, G.J., Gordon, M., Sanudo-Wilhelmy, S.A., 1996. Metal contamination in San Francisco Waters: historic perturbations, contemporary concentrations, and future considerations in San Francisco Bay. In: Hollobaugh, J.T. (Ed.), The Ecosystem. AAAS, pp. 173-188].

Quantifying stream channel sediment contributions for the Paradise Creek Watershed in northern Idaho

NASA Astrophysics Data System (ADS)

Rittenburg, R.; Squires, A.; Boll, J.; Brooks, E. S.

2012-12-01

Excess sediment from agricultural areas has been a major source of impairment for water bodies around the world, resulting in the implementation of mitigation measures across landscapes. Watershed scale reductions often target upland erosion as key non-point sources for sediment loading. Stream channel dynamics, however, also play a contributing role in sediment loading in the form of legacy sediments, channel erosion and deposition, and buffering during storm events. Little is known about in-stream contributions, a potentially important consideration for Total Maximum Daily Loads (TMDLs). The objective of this study is to identify where and when sediment is delivered to the stream and the spatial and temporal stream channel contributions to the overall watershed scale sediment load. The study area is the Paradise Creek Watershed in northern Idaho. We modeled sediment yield to the channel system using the Water Erosion Prediction Project (WEPP) model, and subsequent channel erosion and deposition using CONCEPTs. Field observations of cross-sections along the channel system over a 5-year period were collected to verify model simulations and to test the hypothesis that the watershed load was made up predominantly of legacy sediments. Our modeling study shows that stream channels contributed to 50% of the total annual sediment load for the basin, with a 19 year time lag between sediments entering the stream to leaving the watershed outlet. Observations from long-term data in the watershed will be presented to indicate if the main source of the sediment is from either rural and urban non-point sources or the channel system.

Influence of sediment storage on downstream delivery of contaminated sediment

USGS Publications Warehouse

Malmon, Daniel V.; Reneau, Steven L.; Dunne, Thomas; Katzman, Danny; Drakos, Paul G.

2005-01-01

Sediment storage in alluvial valleys can strongly modulate the downstream migration of sediment and associated contaminants through landscapes. Traditional methods for routing contaminated sediment through valleys focus on in‐channel sediment transport but ignore the influence of sediment exchanges with temporary sediment storage reservoirs outside the channel, such as floodplains. In theory, probabilistic analysis of particle trajectories through valleys offers a useful strategy for quantifying the influence of sediment storage on the downstream movement of contaminated sediment. This paper describes a field application and test of this theory, using 137Cs as a sediment tracer over 45 years (1952–1997), downstream of a historical effluent outfall at the Los Alamos National Laboratory (LANL), New Mexico. The theory is parameterized using a sediment budget based on field data and an estimate of the 137Cs release history at the upstream boundary. The uncalibrated model reasonably replicates the approximate magnitude and spatial distribution of channel‐ and floodplain‐stored 137Cs measured in an independent field study. Model runs quantify the role of sediment storage in the long‐term migration of a pulse of contaminated sediment, quantify the downstream impact of upstream mitigation, and mathematically decompose the future 137Cs flux near the LANL property boundary to evaluate the relative contributions of various upstream contaminant sources. The fate of many sediment‐bound contaminants is determined by the relative timescales of contaminant degradation and particle residence time in different types of sedimentary environments. The theory provides a viable approach for quantifying the long‐term movement of contaminated sediment through valleys.

Sediment supply versus local hydraulic controls on sediment transport and storage in a river with large sediment loads

USGS Publications Warehouse

Dean, David; Topping, David; Schmidt, John C.; Griffiths, Ronald; Sabol, Thomas

2016-01-01

The Rio Grande in the Big Bend region of Texas, USA, and Chihuahua and Coahuila, Mexico, undergoes rapid geomorphic changes as a result of its large sediment supply and variable hydrology; thus, it is a useful natural laboratory to investigate the relative importance of flow strength and sediment supply in controlling alluvial channel change. We analyzed a suite of sediment transport and geomorphic data to determine the cumulative influence of different flood types on changing channel form. In this study, physically based analyses suggest that channel change in the Rio Grande is controlled by both changes in flow strength and sediment supply over different spatial and temporal scales. Channel narrowing is primarily caused by substantial deposition of sediment supplied to the Rio Grande during tributary-sourced flash floods. Tributary floods have large suspended-sediment concentrations, occur for short durations, and attenuate rapidly downstream in the Rio Grande, depositing much of their sediment in downstream reaches. Long-duration floods on the mainstem have the capacity to enlarge the Rio Grande, and these floods, released from upstream dams, can either erode or deposit sediment in the Rio Grande depending upon the antecedent in-channel sediment supply and the magnitude and duration of the flood. Geomorphic and sediment transport analyses show that the locations and rates of sand erosion and deposition during long-duration floods are most strongly controlled by spatial changes in flow strength, largely through changes in channel slope. However, spatial differences in the in-channel sediment supply regulate sediment evacuation or accumulation over time in long reaches (greater than a kilometer).

Improvement of suspended sediment concentration estimation for the Yarlung Zangbo river

NASA Astrophysics Data System (ADS)

Zeng, C.; Zhang, F.

2017-12-01

Suspended sediment load of a river represents integrated results of soil erosion, ecosystem variation and landform change occurring within basin over a specified period. Accurate estimation of suspended sediment concentration is important for calculating suspended sediment load, therefore is helpful for evaluating the impact of natural and anthropogenic factors on earth system processes under the background of global climate change. However, long-term observation of suspended sediment concentration usually very difficult in harsh condition areas e.g. rivers on the Tibet Plateau. This study proposed two sediment rating curve subdivision methods, the flood rank method and suspended sediment concentration stages method, to improve the estimations of daily suspended sediment concentration of the Yarlung Zangbo river during 2007 to 2009. The flood rank method, hypothesized that the higher water flow with larger erosive power can mobilize sediment sources not available during lower flows, suitable for application where sediments were mainly transported by first few flood events. The suspended sediment concentration stages method, assumed that precipitation is the dominating driving force of sediment erosion and transport processes during the flooding periods, suitable for application where soil erosion was closely related to precipitation events. Compared to traditional sediment rating curve and subdivision methods, results showed that the proposed methods can improve suspended sediment concentration and subsequent suspended sediment load estimations in the middle reach of the Yarlung Zangbo river with higher coefficients of determination (R2) and Nash-Sutcliffe efficiency coefficients (NSE), and yielded smaller bias (BIAS) and root-mean-square errors (RMSE). This study can provide guidelines for regional ecological and environmental management.

Concentration, composition and sources of PAHs in the coastal sediments of the exclusive economic zone (EEZ) of Qatar, Arabian Gulf.

PubMed

Soliman, Y S; Al Ansari, E M S; Wade, T L

2014-08-30

Surface sediments were collected from sixteen locations in order to assess levels and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments of Qatar exclusive economic zone (EEZ). Samples were analyzed for 16 parent PAHs, 18 alkyl homologs and for dibenzothiophenes. Total PAHs concentration (∑PAHs) ranged from 2.6 ng g(-1) to 1025 ng g(-1). The highest PAHs concentrations were in sediments in and adjacent to harbors. Alkylated PAHs predominated most of the sampling locations reaching up to 80% in offshore locations. Parent PAHs and parent high molecular weight PAHs dominated location adjacent to industrial activities and urban areas. The origin of PAHs sources to the sediments was elucidated using ternary plot, indices, and molecular ratios of specific compounds such as (Ant/Phe+Ant), (Flt/Flt+Pyr). PAHs inputs to most coastal sites consisted of mixture of petroleum and combustion derived sources. However, inputs to the offshore sediments were mainly of petroleum origin. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sediment dynamics over multiple time scales in Dyke Marsh Preserve (Potomac River, VA)

NASA Astrophysics Data System (ADS)

Palinkas, C. M.; Walters, D.

2010-12-01

Tidal freshwater marshes are critical components of fluvial and estuarine ecosystems, yet sediment dynamics within them have not received as much attention as their saltwater counterparts. This study examines sedimentation in Dyke Marsh Preserve, located on the Potomac River (VA), focusing on understanding the spatial variability present over multiple time scales. Bimonthly sediment data were collected using ceramic tiles, and seasonal- and decadal-scale sedimentation was determined via 7Be (half-life 53.3 days) and 210Pb (half-life 22.3 years), respectively. Results were also compared to SET data collected by the National Park Service since 2006. Preliminary data indicate that sites at lower elevations have higher sedimentation rates, likely related to their close proximity to the sediment source. Mass accumulation rates generally decreased with increasing time scale, such that the seasonal rates were greater than the SET-derived accretion rates, which were in turn greater than the decadal-scale rates. However, the bimonthly rates were the lowest observed, probably because the sampling period (May-October 2010) did not include the main depositional period of the year, which would be integrated by the other techniques.

Continental-scale transport of sediments by the Baltic Ice Stream elucidated by coupled grain size and Nd provenance analyses

NASA Astrophysics Data System (ADS)

Boswell, Steven M.; Toucanne, Samuel; Creyts, Timothy T.; Hemming, Sidney R.

2018-05-01

We introduce a methodology for determining the transport distance of subglacially comminuted and entrained sediments. We pilot this method on sediments from the terminal margin of the Baltic Ice Stream, the largest ice stream of the Fennoscandian Ice Sheet during the Last Glacial Maximum. A strong correlation (R2 = 0.83) between the εNd and latitudes of circum-Baltic river sediments enables us to use εNd as a calibrated measure of distance. The proportion of subglacially transported sediments in a sample is estimated from grain size ratios in the silt fraction (<63 μm). Coupled εNd and grain size analyses reveal a common erosion source for the Baltic Ice Stream sediments located near the Åland sill, more than 850 km upstream from the terminal moraines. This result is in agreement with both numerical modeling and geomorphological investigations of Fennoscandinavian erosion, and is consistent with rapid ice flow into the Baltic basins prior to the Last Glacial Maximum. The methodology introduced here could be used to infer the distances of glacigenic sediment transport from Late Pleistocene and earlier glaciations.

Primary sources and toxicity of PAHs in Milwaukee-area streambed sediment

USGS Publications Warehouse

Baldwin, Austin K.; Corsi, Steven R.; Lutz, Michelle A.; Ingersoll, Christopher G.; Dorman, Rebecca A.; Magruder, Christopher; Magruder, Matthew

2017-01-01

High concentrations of polycyclic aromatic hydrocarbons (PAHs) in streams can be a significant stressor to aquatic organisms. To understand the likely sources and toxicity of PAHs in Milwaukee-area streams, streambed sediment samples from 40 sites and parking lot dust samples from 6 sites were analyzed for 38 parent PAHs and 25 alkylated PAHs. Diagnostic ratios, profile correlations, principal components analysis, source-receptor modeling, and mass fractions analysis were used to identify potential PAH sources to streambed sediment samples, and land-use analysis was used to relate streambed sediment PAH concentrations to different urban-related land uses. On the basis of this multiple lines-of-evidence approach, coal-tar pavement sealant was indicated as the primary source of PAHs in a majority of streambed sediment samples, contributing an estimated 77% of total PAHs to samples, on average. Comparison to the Probable Effect Concentrations and (or) the Equilibrium Partitioning Sediment Benchmark indicates that 78% of stream sediment samples are likely to cause adverse effects to benthic organisms. Laboratory toxicity tests on a 16-sample subset of the streambed sites using the amphipod Hyalella azteca (28-day) and the midge Chironomus dilutus (10-day) measured significant reductions in one or more biological endpoints, including survival, in 75% of samples, with H. azteca more responsive than C. dilutus.

Advances in Holocene mountain geomorphology inspired by sediment budget methodology

NASA Astrophysics Data System (ADS)

Slaymaker, Olav; Souch, Catherine; Menounos, Brian; Filippelli, Gabriel

2003-09-01

The sediment budget, which links sediment sources to sediment sinks with hydroclimatic and weathering processes mediating the response, is applied to the analysis of sediments in three alpine lakes in British Columbia. We provide two ways of using the sediment budget as an integrating device in the interpretation of mountain geomorphology. These approaches differ in their resolution and ability to budget the major components of the fine-sediment cascade in glaciated environments. Taken together, they provide an integrated index of landscape change over the Holocene. The first example compares the hydroclimatic controls of lake sedimentation for the last 600 years (A.D. 1370-1998) preserved in varved sediments from two of the lake basins. This hydroclimatological approach incorporates contemporary monitoring, air photo analysis, and detailed stratigraphy of sedimentation events within a single varve to infer the timing, sources, and preferred pathways of fine-grained sediments reaching the lake basins. The results indicate that glaciers, hillslope, and channel instability within the major subbasins are the principal sediment sources to the lake basins. Transitory sediment storage of glacially derived sediments within the channels is believed to modulate the episodic and more frequent delivery of sediments from adjacent hillslope and fluvial storage sites and direct routing of glacial rock flour during years of prolonged glacial melt. The second example, relying on the phosphorus geochemistry of sediments in an alpine lake basin, considers the evolution of phosphorus forms (from mineral to occluded and organic fractions) as a function of the soil development, inherent slope instability, and repeated cycles of glaciation and neoglaciation over the Holocene. This geochemical approach demonstrates that both neoglaciation and full glaciation have essentially zeroed the system in such a way that a high proportion of mineral phosphorus remains in the present lake sediments and the bioavailability of phosphorus (a key to ecosystem development) is low. Both examples illustrate the importance of variable sediment sources; the seasonality, frequency, and magnitude of sediment transfers; and the profound influence of ice cover over contemporary, neoglacial and Pleistocene time scales. They also signal the value of including both clastic and dissolved components in the sediment budget.

What are the contemporary sources of sediment in the Mississippi River?

NASA Astrophysics Data System (ADS)

Hassan, M. A.; Roberge, L.; Church, M.; More, M.; Donner, S. D.; Leach, J.; Ali, K. F.

2017-09-01

Within the last two centuries, the Mississippi River basin has been transformed by changes in land use practices, dam construction, and training of the rivers for navigation. Here we analyze the contemporary patterns of fluvial sediment yield in the Mississippi River basin using all available data in order to assess the influence of regional land condition on the variation of sediment yield within the basin. We develop regional-scale relations between specific sediment yield (yield per unit area) and drainage area to reveal contemporary regional sediment yield patterns and source areas of riverine sediments. Extensive upland erosion before the development of soil conservation practices exported large amounts of sediment to the valleys and floodplains. We show that sediment today is sourced primarily along the river valleys from arable land, and from stream bank and channel erosion, with sediment yields from areas dominated by arable land 2 orders of magnitude greater than that of grassland dominated areas. Comparison with the "T factor," a commonly quoted measure of agricultural soil resilience suggests that the latter may not reflect contemporary soil loss from the landscape.

Nitrogen Fixation by Anaerobes is Stimulated by Low Oxygen and Insensitive to Combined Nitrogen in Coastal Sediments

NASA Astrophysics Data System (ADS)

Jenkins, B. D.; Spinette, R.; Jones, A.; Puggioni, G.; Ehrlich, A.; Brown, S. M.

2016-02-01

Coastal sediments are typically zones of nitrogen removal via coupled nitrification-denitrification pathways. Increasingly, there are reports of nitrogen fixation in anthropogenically impacted sediments containing ample combined nitrogen. In previous work in the estuarine sediments of Narragansett Bay, we found that anaerobes related to Desulfovibrio spp. and in the Desulfuromonadales express genes for nitrogen fixation (nifH). We also determined that nitrogen fixation rates and gene expression are elevated during periods of seasonal hypoxia. Statistical modeling shows that a combination of elevated phytoplankton biomass as with a duration of hypoxia for a week or longer lead to conditions that promote nitrogen fixation as measured by acetylene reduction. Interestingly, diazotrophs closely related to those identified in Narragansett Bay are present and active in other low oxygen systems, suggesting that expansion of hypoxic events may lead to unanticipated consequences for the benthic nitrogen cycle in many ecosystems. To determine controls on diazotrophy on the organismal level, we isolated and sequenced the genomes of two Narragansett Bay members of the Desulfovibrio. We found that these organisms are insensitive to nitrate and urea, as they are missing the genes to assimilate these nitrogen sources. However, their nitrogen fixation is suppressed by increasing concentrations of ammonium, indicating that they may be sensitive to this nitrogen source in the environment. The paradox of detectable nitrogen fixation in the background of measurable ammonium in estuarine systems is a newly emergent theme and suggests that there are complex microbial interactions and/or structure to the nutrient regimes allowing for fixation.

The influence of a subduction component on magmatism in the Okinawa Trough: Evidence from thorium and related trace element ratios

NASA Astrophysics Data System (ADS)

Guo, Kun; Zeng, Zhi-Gang; Chen, Shuai; Zhang, Yu-Xiang; Qi, Hai-Yan; Ma, Yao

2017-09-01

The Okinawa Trough (OT) is a back-arc, initial continental marginal sea basin located behind the Ryukyu Arc-Trench System. Formation and evolution of the OT have been intimately related to subduction of the Philippine Sea Plate (PSP) since the late Miocene; thus, the magma source of the trough has been affected by subduction components, as in the case of other active back-arc basins, including the Lau Basin (LB) and Mariana Trough (MT). We review all the available geochemical data relating to basaltic lavas from the OT and the middle Ryukyu Arc (RA) in this paper in order to determine the influence of the subduction components on the formation of arc and back-arc magmas within this subduction system. The results of this study reveal that the abundances of Th in OT basalts (OTBs) are higher than that in LB (LBBs) and MT basalts (MTBs) due to the mixing of subducted sediments and EMI-like enriched materials. The geochemical characteristics of Th and other trace element ratios indicate that the OTB originated from a more enriched mantle source (compared to N-mid-ocean ridge basalt, N-MORB) and was augmented by subducted sediments. Data show that the magma sources of the south OT (SOT) and middle Ryukyu Arc (MRA) basalts were principally influenced by subducted aqueous fluids and bulk sediments, which were potentially added into magma sources by accretion and underplating. At the same time, the magma sources of the middle OT (MOT) and Kobi-syo and Sekibi-Syo (KBS+SBS) basalts were impacted by subducted aqueous fluids from both altered oceanic crust (AOC) and sediment. The variable geochemical characteristics of these basalts are due to different Wadati-Benioff depths and tectonic environments of formation, while the addition of subducted bulk sediment to SOT and MRA basalts may be due to accretion and underplating, and subsequent to form mélange formation, which would occur partial melting after aqueous fluids are added. The addition of AOC and sediment aqueous fluid to MOT and KBS+SBS basalts is therefore the result of cold subducted slab dehydration combined with a rapid subduction rate (82 mm/a), leading to the migration of fluids into the mantle wedge. The presence of these attributes is likely because the OT was a back-arc, initial continental marginal sea basin.

Microbial Communities Associated with Phosphorite-bearing Sediments

NASA Astrophysics Data System (ADS)

Zoss, R.; Bailey, J.; Flood, B.; Jones, D. S.

2016-12-01

Phosphorus is a limiting nutrient in the environment and is an important component of many biological molecules. Calcium phosphate mineral deposits known as phosphorites, are also the primary source of P for agriculture. Understanding phosphorite formation may improve management of P resources. However, the processes that mediate calcium phosphate mineral precipitation in certain marine pore waters remain poorly understood. Phosphogenesis occurs in sediments beneath some oceanic upwelling zones that harbor polyphosphate-accumulating giant sulfur bacteria (GSB). These bacteria may concentrate phosphate in sediment pore waters - creating supersaturated conditions with respect to apatite. However, the relationship between microbes and phosphogenesis is not fully resolved. To further study this relationship, we examined microbial communities from two sources: sediment cores recovered from the shelf of the Benguela region, and DNA extracted from washed phosphorites recovered from those same sediments. We used itag and clone library sequencing of the 16S rRNA gene to examine the microbial communities and their relationship with the environment. We found that many of our sediments shared large numbers of phylotypes with one another, and that the same metabolic guilds were represented at localities across the shelf. Sulfur-reducing bacteria and sulfur-oxidizing bacteria were abundant in our datasets. Phylotypes that are known to carry out nitrification and/or anammox (anaerobic ammonia oxidation) were also well-represented. Our phosphorite extraction, however, contained a distinct microbial community from those observed in the modern sediments. We observed both an enrichment of certain common microbial classes and a complete absence of others. These results could represent an ancient microbial assemblage that was present when the apatite precipitated. While these taxa may or may not have contributed to apatite precipitation, several groups represented in the phosphorite dataset have the genetic potential, as determined through the analysis of published genomes, to synthesize, and perhaps accumulate, polyphosphate.

Linear alkylbenzenes as tracers of sewage-sludge-derived inputs of organic matter, PCBs, and PAHs to sediments at the 106-mile deep water disposal site

USGS Publications Warehouse

Lamoureux, E.M.; Brownawell, Bruce J.; Bothner, Michael H.

1996-01-01

Linear alkylbenzenes (LABs) are sensitive source-specific tracers of sewage inputs to the marine environment. Because they are highly particle reactive and nonspecifically sorbed to organic matter, LABs are potential tracers of the transport of both sludge-derived organic matter and other low solubility hydrophobic contaminants (e.g., PCBs and PAHs); sediment trap studies at the 106-Mile Site have shown LABs to be valuable in testing models of sludge deposition to the sea floor. In this study we report on the distributions of LABs, PCBs, PAHs, and Ag in surface sediments collected within a month of the complete cessation of dumping (July, 1992) in the vicinity of the dump site. Total LAB concentrations were lower than those measured by Takada and coworkers in samples from nearby sites collected in 1989. LABs from both studies appear to be significantly depleted (6 to 25-fold) in surface sediments relative to excess Ag (another sludge tracer) when compared to sewage sludge and sediment trap compositions. Comparison of LAB sediment inventories to model predictions of sludge particle fluxes supports the contention that LABs have been lost from the bed. The use of LABs to examine the short-or long-term fate of sludge derived materials in deep-sea sediments should be questioned. The causes of this LAB depletion are unclear at this point, and we discuss several hypotheses. The concentrations of total PCBs and PAHs are both correlated with sludge tracers, suggesting that there may be a measurable contribution of sludge-derived inputs on top of other nonpoint sources of these contaminant classes. This possibility is consistent with the composition of these contaminants determined in recent and historical analyses of sewage sludge.

Effects of algal-derived carbon on sediment methane ...

EPA Pesticide Factsheets

Nutrient loading is known to have adverse consequences for aquatic ecosystems, particularly in the form of algal blooms that may result. These blooms pose problems for humans and wildlife, including harmful toxin release, aquatic hypoxia and increased costs for water treatment. Another potential disservice resulting from algal blooms is the enhanced production of methane (CH4), a potent greenhouse gas, in aquatic sediments. Laboratory experiments have shown that algal biomass additions to sediment cores increase rates of CH4 production, but it is unclear whether or not this effect occurs at the ecosystem scale. The goal of this research was to explore the link between algal-derived carbon and methane production in the sediment of a eutrophic reservoir located in southwest Ohio, using a sampling design that capitalized on spatial and temporal gradients in autochthonous carbon input to sediments. Specifically, we aimed to determine if the within-reservoir gradient of sediment algal-derived organic matter and sediment CH4 production rates correlate. This was done by retrieving sediment cores from 15 sites within the reservoir along a known gradient of methane emission rates, at two separate time points in 2016: late spring before the sediments had received large amounts of algal input and mid-summer after algal blooms had been prevalent in the reservoir. Potential CH4 production rates, sediment organic matter source, and microbial community composition were charac

Subsoil erosion dominates the supply of fine sediment to rivers draining into Princess Charlotte Bay, Australia.

PubMed

Olley, Jon; Brooks, Andrew; Spencer, John; Pietsch, Timothy; Borombovits, Daniel

2013-10-01

The Laura-Normanby River (catchment area: 24,350 km(2)), which drains into Princess Charlotte Bay, has been identified in previous studies as the third largest contributor of sediment to the Great Barrier Reef World Heritage Area. These catchment scale modelling studies also identified surface soil erosion as supplying >80% of the sediment. Here we use activity concentrations of the fallout radionuclides (137)Cs and (210)Pbex to test the hypothesis that surface soil erosion dominates the supply of fine (<10 μm) sediment in the river systems draining into Princess Charlotte Bay. Our results contradict these previous studies, and are consistent with channel and gully erosion being the dominant source of fine sediment in this catchment. The hypothesis that surface soil erosion dominates the supply of fine sediment to Princess Charlotte Bay is rejected. River sediment samples were collected using both time-integrated samplers and sediment drape deposits. We show that there is no detectable difference in (137)Cs and (210)Pbex activity concentrations between samples collected using these two methods. Two methods were also used to collect samples to characterise (137)Cs and (210)Pbex concentrations in sediment derived from surface soil erosion; sampling of surface-wash deposits and deployment of surface runoff traps that collected samples during rain events. While there was no difference in the (137)Cs activity concentrations for samples collected using these two methods, (210)Pbex activity concentrations were significantly higher in the samples collected using the runoff traps. The higher (210)Pbex concentrations are shown to be correlated with loss-on-ignition (r(2) = 0.79) and therefore are likely to be related to higher organic concentrations in the runoff trap samples. As a result of these differences we use a three end member mixing model (channel/gully, hillslope surface-wash and hillslope runoff traps) to determine the relative contribution from surface soil erosion. Probability distributions for (137)Cs and (210)Pbex concentrations were determined for each of the end members, with these distributions then used to estimate the surface soil contribution to each of the collected river sediment samples. The mean estimate of contribution of surface derived sediment for all river samples (n = 70) is 16 ± 2%. This study reinforces the importance of testing model predictions before they are used to target investment in remedial action and adds to the body of evidence that the primary source of sediment delivered to tropical river systems is derived from subsoil erosion. Copyright © 2013 Elsevier Ltd. All rights reserved.

Plutonium activities and 240Pu/ 239Pu atom ratios in sediment cores from the east China sea and Okinawa Trough: Sources and inventories

NASA Astrophysics Data System (ADS)

Wang, Zhong-liang; Yamada, Masatoshi

2005-05-01

Plutonium concentrations and 240Pu/ 239Pu atom ratios in the East China Sea and Okinawa Trough sediment cores were determined by isotope dilution inductively coupled plasma mass spectrometry after separation using ion-exchange chromatography. The results showed that 240Pu/ 239Pu atom ratios in the East China Sea and Okinawa Trough sediments, ranging from 0.21 to 0.33, were much higher than the reported value of global fallout (0.18). The highest 240Pu/ 239Pu ratios (0.32-0.33) were observed in the deepest Okinawa Trough sediment samples. These ratios suggested the US nuclear weapons tests in the early 1950s at the Pacific Proving Grounds in the Marshall Islands were a major source of plutonium in the East China Sea and Okinawa Trough sediments, in addition to the global fallout source. It was proposed that close-in fallout plutonium was delivered from the Pacific Proving Grounds test sites via early direct tropospheric fallout and transportation by the North Pacific Equatorial Circulation system and Kuroshio Current into the Okinawa Trough and East China Sea. The total 239 + 240 Pu inventories in the cores were about 150-200% of that expected from direct global fallout; about 46-67% of the total inventories were delivered from the Pacific Proving Grounds. Much higher 239 + 240 Pu inventories were observed in the East China Sea sediments than in sediments of the Okinawa Trough, because in the open oceans, part of the 239 + 240 Pu was still retained in the water column, and continued Pu scavenging was higher over the margin than the trough. According to the vertical distributions of 239 + 240 Pu activities and 240Pu/ 239Pu atom ratios in these cores, it was concluded that sediment mixing was the dominant process in controlling profiles of plutonium in this area. Faster mixing in the coastal samples has homogenized the entire 240Pu/ 239Pu ratio record today; slightly slower mixing and less scavenging in the Okinawa Trough have left the surface sediment ratios closer to the modern North Pacific water end member and higher ratios (0.30-0.34) at the bottom of the cores.

Understanding the Role of the Co-Play between Land Use and Climate on Sediment Flux Laws in Intensively Managed Landscapes

NASA Astrophysics Data System (ADS)

Abban, B. K.; Papanicolaou, T.; Wilson, C. G.; Giannopoulos, C.; Sivapalan, M.

2017-12-01

In intensively managed landscapes (IMLs), changes in the land cover from what were previously grasslands, and their associated management practices, have led to a high degree of spatial heterogeneity and temporal variability in landscape processes that were absent pre-settlement. This has fundamentally altered terrestrial and instream sediment flux characteristics in regards to net amounts and proportions of source contributions, at shorter time scales. Sediment flux laws are now highly impacted by event-based dynamics. Whereas some events result in highly intermittent fluxes, others result in fluxes that largely propagate in the form of waves. This behavior is governed by the extent of land cover at the given time of the season, as well as the magnitude of the storm event. In addition, flux behavior changes as one moves from the plot scale to the watershed scale, and also with crop rotation. Thus, fluxes are now non-stationary due to continued human activity and its co-play with climate. The goal of this study is to develop a better understanding of the non-stationarity in sediment flux laws that arise from the co-play between land use and climate. Our approach involves the development of a modeling framework that considers all the exchanges between terrestrial and instream sources and addresses the issue of equifinality regarding terrestrial and instream source contributions on net sediment fluxes. The modeling framework couples an established terrestrial erosion model with an established in-stream sediment transport model. As a first step, our study focuses on the Clear Creek Watershed, IA, which is part of the Critical Zone Observatory for Intensively Managed Landscapes. We complement our modeling efforts with extensive terrestrial and instream field observations gathered at different times of the growing season, and in different years. We also used Bayesian sediment sourcing techniques to determine the provenance of transported material as well as the uncertainty related to the travel times and delivery of material across the different spatial scales. Findings from this study will shed light on the dominant factors governing fluxes laws and how they change over the course of a season, as well as the factors that control the changes in the flux laws across space.

Mud, models, and managers: Reaching consensus on a watershed strategy for sediment load reduction

NASA Astrophysics Data System (ADS)

Wilcock, P. R.; Cho, S. J.; Gran, K.; Belmont, P.; Hobbs, B. F.; Heitkamp, B.; Marr, J. D.

2017-12-01

Agricultural nonpoint source sediment pollution is a leading cause of impairment of U.S. waters. Sediment sources are often on private land, such that solutions require not only considerable investment, but broad acceptance among landowners. We present the story of a participatory modeling exercise whose goal was to develop a consensus strategy for reducing sediment loading from the Greater Blue Earth River Basin, a large (9,200 km2) watershed in southern Minnesota dominated by row crop agriculture. The Collaborative for Sediment Source Reduction was a stakeholder group of farmers, industry representatives, conservation groups, and regulatory agencies. We used a participatory modeling approach to promote understanding of the problem, to define the scope of solutions acceptable to farmers, to develop confidence in a watershed model, and to reach consensus on a watershed strategy. We found that no existing watershed model could provide a reliable estimate of sediment response to management actions and developed a purpose-built model that could provide reliable, transparent, and fast answers. Because increased stream flow was identified as an important driver of sediment loading, the model and solutions included both hydrologic and sediment transport components. The model was based on an annual sediment budget with management actions serving to proportionally reduce both sediment sources and sediment delivery. Importantly, the model was developed in collaboration with stakeholders, such that a shared understanding emerged regarding of the modeling challenges and the reliability of information used to strongly constrain model output. The simplicity of the modeling approach supported stakeholder engagement and understanding, thereby lowering the social barrier between expert modeler and concerned stakeholder. The consensus strategy focused on water storage higher in the watershed in order to reduce river discharge and the large supply of sediment from near-channel sources. Because water storage must occur largely on private farmland, this strategy was initially opposed by some stakeholders, such that model simplicity and transparency was essential in reaching a consensus strategy.

Quantity, composition, and source of sediment collected in sediment traps along the fringing coral reef off Molokai, Hawaii

USGS Publications Warehouse

Bothner, Michael H.; Reynolds, R.L.; Casso, M.A.; Storlazzi, C.D.; Field, M.E.

2006-01-01

Sediment traps were used to evaluate the frequency, cause, and relative intensity of sediment mobility/resuspension along the fringing coral reef off southern Molokai (February 2000–May 2002). Two storms with high rainfall, floods, and exceptionally high waves resulted in sediment collection rates > 1000 times higher than during non-storm periods, primarily because of sediment resuspension by waves. Based on quantity and composition of trapped sediment, floods recharged the reef flat with land-derived sediment, but had a low potential for burying coral on the fore reef when accompanied by high waves.The trapped sediments have low concentrations of anthropogenic metals. The magnetic properties of trapped sediment may provide information about the sources of land-derived sediment reaching the fore reef. The high trapping rate and low sediment cover indicate that coral surfaces on the fore reef are exposed to transient resuspended sediment, and that the traps do not measure net sediment accumulation on the reef surface.

Quantity, composition, and source of sediment collected in sediment traps along the fringing coral reef off Molokai, Hawaii.

PubMed

Bothner, Michael H; Reynolds, Richard L; Casso, Michael A; Storlazzi, Curt D; Field, Michael E

2006-09-01

Sediment traps were used to evaluate the frequency, cause, and relative intensity of sediment mobility/resuspension along the fringing coral reef off southern Molokai (February 2000-May 2002). Two storms with high rainfall, floods, and exceptionally high waves resulted in sediment collection rates>1000 times higher than during non-storm periods, primarily because of sediment resuspension by waves. Based on quantity and composition of trapped sediment, floods recharged the reef flat with land-derived sediment, but had a low potential for burying coral on the fore reef when accompanied by high waves. The trapped sediments have low concentrations of anthropogenic metals. The magnetic properties of trapped sediment may provide information about the sources of land-derived sediment reaching the fore reef. The high trapping rate and low sediment cover indicate that coral surfaces on the fore reef are exposed to transient resuspended sediment, and that the traps do not measure net sediment accumulation on the reef surface.

Contemporary suspended sediment yield of a partly glaciated catchment, Riffler Bach (Tyrol, Austria)

NASA Astrophysics Data System (ADS)

Weber, Martin; Baewert, Henning; Morche, David

2015-04-01

Due to glacier retreat since the LIA (Little Ice Age) proglacial areas in high mountain landscapes are growing. These systems are characterized by a high geomorphological activity, especially in the fluvial subsystem. Despite the long tradition of geomorphological research in the European Alps there is a still a lack of understanding in the interactions between hydrology, sediment sources, sediments sinks and suspended sediment transport. As emphasized by ORWIN ET AL. (2010) those problems can be solved by gathering data in a higher frequency and/or in a higher spatial resolution or density - both leading to a big amount of data. In 2012 a gauging station was installed at the outlet of the partly glaciated catchment of the Riffler Bach (Kaunertal valley, Tyrol). During the ablation seasons in 2012 and 2013 water stage was logged automatically every 15 minutes. In both seasons discharge was measured at different water levels to calculate a stage-discharge relation. Additionally, water samples were taken by an automatic water sampler. Within 16 sampling cycles with sampling frequencies ranging from 1 to 24 hours 389 water samples have been collected. The samples were filtered to calculate the suspended sediment concentration (SSC) of each sample. Furthermore, the climate station Weißsee provided meteorological data at a 15 minute interval. Due to the high variability in suspended sediment transport in proglacial rivers it is impossible to compute a robust annual Q-SSC-relation. Hence, two other approaches were used to calculate the suspended sediment load (SSL) and the suspended sediment yield (SSY): A) Q-SSC-relations for every single sampling cycle (e.g. GEILHAUSEN ET AL. 2013) B) Q-SSC-relations based on classification of dominant runoff-generating processes (e.g. ORWIN AND SMART 2004). The first approach uses commonly operated analysis methods that are well understood. While the hydro-climatic approach is more feasible to explain discharge generation and to locate sediment sources both approaches underline the fact that SSC does not always depends on discharge but also on sediment availability. The comparison of both approaches shows that in well investigated areas the results are strongly determined by the choice of the analysis method. References Geilhausen, M., Morche, D., Otto, J.-C. and Schrott, L. (2013): Sediment discharge from the proglacial zone of a retreating Alpine glacier. Z Geomorphol Supplementary Issue 57 (2), 29-53. DOI: 10.1127/0372-8854/2012/S-00122 Orwin, J., Lamoureux, S.F., Warburton, J. and Beylich, A., (2010): A framework for characterizing fluvial sediment fluxes from source to sink in cold environments. Geogr. Ann. 92 A (2): 155-176. Orwin, J.F. and Smart, C.C. (2004): Short-term spatial and temporal patterns of suspended sediment transfer in proglacial channels, Small River Glacier, Canada. Hydrol. Process. 18, 1521-1542.

Eastern Equatorial Pacific Dust Provenance on Deglacial Timescales

NASA Astrophysics Data System (ADS)

Xie, R.; Marcantonio, F.

2008-12-01

Changing patterns of eolian dust deposition preserved in deep-sea sediments have the potential to provide us with a better understanding of changes in past atmospheric circulation. One way in which to determine the provenance of dust in deep-sea sediments is to use radiogenic isotopic tracers which can fingerprint potential dust sources. Models (e.g., [1]) suggest that sources of dust to the Eastern Equatorial Pacific (EEP) are from areas as diverse as Asia, North, Central, and South America, and, perhaps, even Africa. Here, we investigate spatial and temporal changes in the provenance of the eolian component in the EEP by measuring Pb, Sr, and Nd isotope ratios in dust extracted from sediments along a transect at 110oW from 7oN to 3oS (ODP sites 853 - 848). In this region, although fluxes of dust were higher during the last glacial maximum (LGM) than those in the Holocene by up to 100%, the glacial flux of dust displayed a shallower meridional gradient [2]. However, it is unclear whether this shallower gradient is due to a mean southerly displacement of the Intertropical Convergence Zone (ITCZ). Most of the dust trying to pass through the ITCZ will be scavenged and rained out at the ITCZ. Along the meridional gradient, therefore, temporal variations in the Pb, Sr, and Nd isotopic fingerprints of the distinct dust sources will determine the extent to which the position of the ITCZ changes on deglacial timescales. [1] Mahowald et al., 2005, Global Biogeochemical Cycles 19, GB4025. [2] McGee et al., 2007, EPSL 257, 215-230.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bratkič, Arne, E-mail: arne.bratkic@ijs.si; Ogrinc, Nives, E-mail: nives.orginc@ijs.si; Kotnik, Jože, E-mail: joze.kotnik@ijs.si

In this study, seasonal changes of mercury (Hg) species in the highly variable estuary of Soča/Isonzo River (northern Adriatic Sea) were investigated. Samplings were performed on a seasonal basis (September 2009, May, August and October 2010) and Hg species (total Hg, methylmercury (MeHg), dissolved gaseous Hg (DGM)) in waters, sediments and pore waters were determined. In addition, a range of ancillary parameters were measured (salinity, nutrients, organic carbon (OC), nitrogen species). Hg values were interpreted using these parameters and hydrological conditions (river flow, wave height) around the time of sampling. There were no significant changes in Hg load from rivermore » to the gulf, compared to previous studies. The load was temporarily higher in May 2010 due to higher river flow. Wave height, through changing hydrostatic pressure, was most likely to cause resuspension of already deposited Hg from the bottom (August 2010). The estuary is a net source of DGM to the atmosphere as suggested by DGM profiles, with salinity, redox potential and organic matter as the most probable controls over its production. MeHg is produced in situ in sediment or in water column, rather than transported by river, as indicated by its correlation with OC of the marine origin. Calculated fluxes for THg and MeHg showed sediment as a source for both the water column. In pore waters, OC in part affects partitioning of both THg and MeHg; however other factors (e.g. sulphide and/or oxyhydroxides precipitation and dissolution) are also probably important. -- Highlights: ► Water, sediment and pore water mercury species in front of Soča River estuary were measured. ► Seasonally variable hydrological conditions were shown to influence water column Hg speciation. ► Fluxes for total Hg and MeHg from sediment to water were calculated. ► Sediment is a source of total Hg and MeHg to the water column. ► Correlation of MeHg with organic carbon of marine origin suggests in situ formation.« less

Analysis of wall plasters and natural sediments from the Neolithic town of Çatalhöyük (Turkey) by a range of analytical techniques

NASA Astrophysics Data System (ADS)

Anderson, Emma; Almond, Matthew J.; Matthews, Wendy

2014-12-01

Wall plaster sequences from the Neolithic town of Çatalhöyük have been analysed and compared to three types of natural sediment found in the vicinity of the site, using a range of analytical techniques. Block samples containing the plaster sequences were removed from the walls of several different buildings on the East Mound. Sub-samples were examined by IR spectroscopy, X-ray diffraction and X-ray fluorescence to determine the overall mineralogical and elemental composition, whilst thin sections were studied using optical polarising microscopy, IR Microscopy and Environmental Scanning Electron Microscopy with Energy Dispersive X-ray analysis. The results of this study have shown that there are two types of wall plaster found in the sequences and that the sediments used to produce these were obtained from at least two distinct sources. In particular, the presence of clay, calcite and magnesian calcite in the foundation plasters suggested that these were prepared predominantly from a marl source. On the other hand, the finishing plasters were found to contain dolomite with a small amount of clay and no calcite, revealing that softlime was used in their preparation. Whilst marl is located directly below and around Çatalhöyük, the nearest source of softlime is 6.5 km away, an indication that the latter was important to the Neolithic people, possibly due to the whiter colour (5Y 8/1) of this sediment. Furthermore, the same two plaster types were found on each wall of Building 49, the main building studied in this research, and in all five buildings investigated, suggesting that the use of these sources was an established practice for the inhabitants of several different households across the site.

Sources, dispersal, and fate of fine sediment supplied to coastal California

USGS Publications Warehouse

Farnsworth, Katherine L.; Warrick, Jonathan A.

2007-01-01

We have investigated the sources, dispersal, and fate of fine sediment supplied to California coastal waters in a partnership between the U.S. Geological Survey (USGS) and the California Sediment Management Workgroup (CSMW). The purpose of this study was to document the rates and characteristics of these processes so that the State can better manage its coastal resources, including sediment. In this study, we made the following observations: - Rivers dominate the supply of fine sediment to the California coastal waters, with an average annual flux of 34 megatonnes (Mt). - Cliff and bluff erosion in central and southern California is a source of fine sediment, with a delivery rate of approximately 10 percent of river loads. In the southern most part of the State, however, where river-sediment loads are low, cliff and bluff erosion represent approximately 40 percent of the total fine-sediment flux. - Temporal variation in the sources of fine sediment is high. River floods and bluff erosion are episodic and dominated by winter storms, which supply most sediment flux to the coast. The magnitude of winter storms is generally related to the El Niño-Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) climate cycles. - The three rivers that dominate fine-sediment flux to the California coast are the Eel, Salinas, and Santa Clara Rivers. Because the sediment delivery from these and all other California coastal watersheds is episodic, individual rivers discharge most of their annual loads over the course of only a few days per year. - Spatial variation in river-sediment discharge is high and generally related to such watershed characteristics as geology, precipitation, and drainage area. For example, the Transverse Range of southern California represents only 9 percent of the watershed-drainage area but 18 percent of the fine-sediment flux, a function of the young sedimentary bedrock and active tectonics of this region. The urban rivers of southern California were observed to discharge sediment at rates consistent with those of the surrounding Transverse Range rivers, which share the same geologic setting. - Direct observations of fine-sediment dispersal have been limited to the river-mouth settings of the Eel and Santa Clara Rivers, where sediment has been observed to settle quickly from buoyant plumes and be transported along the seabed during periods of storm waves. - After heavy loading of fine sediment onto the continental shelf during river floods, there is increasing evidence that fluid-mud gravity flows occur within a layer 10 to 50 cm above the seabed and efficiently transport fine sediment offshore. - All along the California coast, the timing of river discharge and coastal winds and waves from storm events are strongly coherent; however, of large wave events with the potential for resuspending and transporting fine sediment occur during periods without significant rainfall and therefore no significant river discharge. - Although fine sediment dominates the midshelf mud belts offshore of California river mouths, these mud belts are not the dominant sink of fine sediment, much of which is deposited across the entire continental shelf, including the inner shelf, and offshelf into deeper water depths. - Accumulation rates of fine sediment, which can exceed several millimeters per year, are generally highest near river sources of sediment and along the inner shelf and midshelf. - Sediment-accumulation rates, as summarized from both long-term and recent investigations of continental-shelf geochronology, are generally consistent across California except in southern California, where recently the sediment-accumulation rate has been tenfold greater than the long-term rate, possibly as a result of increased river discharge, wastewater outfall inputs, or other anthropogenic sources. Thus, fine sediment is a natural and dynamic element of the California coastal system because of large, natural sediment sources and dynamic transport processes.

Magnetic properties as tracers for source-to-sink dispersal of sediments: A case study in the Taiwan Strait

NASA Astrophysics Data System (ADS)

Horng, Chorng-Shern; Huh, Chih-An

2011-09-01

Different lithologies between Taiwan and southeastern China lead to diverse mineralogical composition for weathering products derived from the two shores of the Taiwan Strait. Pyrrhotite and magnetite are respectively the dominant magnetic minerals associated with fluvial sediments from western Taiwan and southeastern China. While magnetite commonly co-exists with pyrrhotite in sediments sourced from Taiwan, pyrrhotite has not been found in sediments sourced from mainland China. Associated with such a distinction are vast differences in magnetic properties, including magnetic susceptibility (χ), SIRM, HIRM and the S-ratio, which can be used to study the provenances of sediments in the Taiwan Strait and adjoining marginal seas. Based on any two of these parameters, the magnetic characteristics of much of the Taiwan Strait sediment can be explained using a two-endmember mixing model. Source-to-sink dispersal of sediments in the Taiwan Strait can then be traced from the distribution of these parameters. The results not only corroborate an earlier study based on radionuclides and particle size distribution ( Huh et al., 2011) but reveal more diagnostic details. Besides spatial distribution based on a large number (216) of surface sediments, we also analyzed temporal variation of magnetic properties in six well-dated cores collected at key sites along the sediment source-to-sink pathways. From profiles of these parameters in cores from the middle of the northern Taiwan Strait, it is calculated that sediment supply from Taiwan has increased substantially in the past five decades, which may very well be related to accelerated land use and increased frequency of intense rainfalls in Taiwan during the same period. The approach described in this work may be extended to other source-to-sink systems around the world and through time, especially the mountainous islands fringing the Pacific and Indian Oceans in southeastern Asia. As with Taiwan, these islands have high denudation rates and pyrrhotite is in all likelihood a mineral characteristic of their metamorphic terrains.

Role of environmental factors and microorganisms in determining the fate of polycyclic aromatic hydrocarbons in the marine environment

PubMed Central

Duran, Robert; Cravo-Laureau, Cristiana

2016-01-01

Polycyclic aromatic hydrocarbons (PAHs) are widespread in marine ecosystems and originate from natural sources and anthropogenic activities. PAHs enter the marine environment in two main ways, corresponding to chronic pollution or acute pollution by oil spills. The global PAH fluxes in marine environments are controlled by the microbial degradation and the biological pump, which plays a role in particle settling and in sequestration through bioaccumulation. Due to their low water solubility and hydrophobic nature, PAHs tightly adhere to sediments leading to accumulation in coastal and deep sediments. Microbial assemblages play an important role in determining the fate of PAHs in water and sediments, supporting the functioning of biogeochemical cycles and the microbial loop. This review summarises the knowledge recently acquired in terms of both chronic and acute PAH pollution. The importance of the microbial ecology in PAH-polluted marine ecosystems is highlighted as well as the importance of gaining further in-depth knowledge of the environmental services provided by microorganisms. PMID:28201512

[Determination of total mercury in water samples, sediments and solids in suspension in aquatic systems by cold-vapor atomic absorption spectrophotometry].

PubMed

Vieira, J L; Passarelli, M M

1996-06-01

The use of metallic mercury in the extraction and concentration of gold causes the discarding of tons of this metal in the environment, leading to a considerable increase in the natural levels of the same and the contamination of the surrounding areas. Thus it is extremely important to monitor the presence of this metal in various sectors of the environment with a view aiming to preventing human exposure to excessive concentrations which can result in serious episodes of mercury poisoning. It is also important to estimate the possibility of river sediments becoming potential sources of contamination of human beings. The determination of total mercury was undertaken by using cold vapor atomic absorption spectrometry. River waters, as well as sediments and suspended solids were used as samples for the standardization of the analytical procedure. Later on, this method was tested on samples originating in gold mining areas for the purpose of assessing its validity.

Analysis of suspended-sediment concentrations and radioisotope levels in the Wild Rice River basin, northwestern Minnesota, 1973-98

USGS Publications Warehouse

Brigham, Mark E.; McCullough, Carolyn J.; Wilkinson, Philip M.

2001-01-01

We examined historical suspended-sediment data and activities of fallout radioisotopes (lead-210 [210Pb], cesium-137 [137Cs], and beryllium-7 [7Be]) associated with suspended sediments and source-area sediments (cultivated soils, bank material, and reference soils) in the Wild Rice River Basin, a tributary to the Red River of the North, to better understand sources of suspended sediment to streams in the region. Multiple linear regression analysis of suspended-sediment concentrations from the Wild Rice River at Twin Valley, Minnesota indicated significant relations between suspended-sediment concentrations and streamflow. Flow-adjusted sediment concentrations tended to be slightly higher in spring than summer-autumn. No temporal trends in concentration were observed during 1973-98. The fallout radioisotopes were nearly always detectable in suspended sediments during spring-summer 1998. Mean 210Pb and 7Be activities in suspended sediment and surficial, cultivated soils were similar, perhaps indicating little dilution of suspended sediment from low-isotopic-activity bank sediments. In contrast, mean 137Cs activities in suspended sediment indicated a mixture of sediment originating from eroded soils and from eroded bank material, with bank material being a somewhat more important source upstream of Twin Valley, Minnesota; and approximately equal fractions of bank material and surficial soils contributing to the suspended load downstream at Hendrum, Minnesota. This study indicates that, to be effective, efforts to reduce sediment loading to the Wild Rice River should include measures to control soil erosion from cultivated fields.

Sand sources and transport pathways for the San Francisco Bay coastal system, based on X-ray diffraction mineralogy

USGS Publications Warehouse

Hein, James R.; Mizell, Kira; Barnard, Patrick L.; Barnard, P.L.; Jaffee, B.E.; Schoellhamer, D.H.

2013-01-01

The mineralogical compositions of 119 samples collected from throughout the San Francisco Bay coastal system, including bayfloor and seafloor, area beaches, cliff outcrops, and major drainages, were determined using X-ray diffraction (XRD). Comparison of the mineral concentrations and application of statistical cluster analysis of XRD spectra allowed for the determination of provenances and transport pathways. The use of XRD mineral identifications provides semi-quantitative compositions needed for comparisons of beach and offshore sands with potential cliff and river sources, but the innovative cluster analysis of XRD diffraction spectra provides a unique visualization of how groups of samples within the San Francisco Bay coastal system are related so that sand-sized sediment transport pathways can be inferred. The main vector for sediment transport as defined by the XRD analysis is from San Francisco Bay to the outer coast, where the sand then accumulates on the ebb tidal delta and also moves alongshore. This mineralogical link defines a critical pathway because large volumes of sediment have been removed from the Bay over the last century via channel dredging, aggregate mining, and borrow pit mining, with comparable volumes of erosion from the ebb tidal delta over the same period, in addition to high rates of shoreline retreat along the adjacent, open-coast beaches. Therefore, while previously only a temporal relationship was established, the transport pathway defined by mineralogical and geochemical tracers support the link between anthropogenic activities in the Bay and widespread erosion outside the Bay. The XRD results also establish the regional and local importance of sediment derived from cliff erosion, as well as both proximal and distal fluvial sources. This research is an important contribution to a broader provenance study aimed at identifying the driving forces for widespread geomorphic change in a heavily urbanized coastal-estuarine system.

Investigating eukaryotic fermentation as the likely source of unassigned dissolved inorganic carbon production in permeable sediments under anoxic conditions.

NASA Astrophysics Data System (ADS)

Bourke, M.; Cook, P. L. M.

2016-02-01

Experiments using flow through columns have revealed that in permeable sediments, under anoxic conditions, only 2-5% of dissolved inorganic carbon (DIC) production could be attributed to external electron acceptors including nitrate, sulphate and iron.. The remaining 95-98% of DIC production remains unassigned to any biogeochemical pathway. This possibly ubiquitous phenomenon has been observed at several sites around Port Phillip Bay in Victoria, Australia and the Danish Baltic Sea. Identifying the process by which this unassigned DIC is being generated and determining which organisms are responsible, has been the primary focus of this research. CaCO3 dissolution has been dismissed as a potential abiotic explanation for this unassigned DIC production on the basis of sample effluent analyses for alkalinity and Ca2+ and the observation that treating the sediments with HgCl2 inhibited all DIC production, suggesting a biotic source is likely. Dissimilatory nitrate reduction to ammonium using an intracellular pool of nitrate has also been dismissed as an explanation due to the concentration of nitrate in intracellular pools was determined to be negligible in relation to the DIC production. The most likely explanation appears to be fermentation, whereby, organic carbon would be used as both the electron acceptor and donor. Experiments employing the use of two broad spectrum antibiotics, amoxicillin and ciprofloxacin, have revealed that DIC production continues unaffected, whilst established bacterial processes, like denitrification, are inhibited. This suggests that the source is eukaryotic. After approximately 48 hours of anoxia, dissolved hydrogen was detected at approximately 5 µM and increased to 72 µM over a 3 day period, representing 85% of the DIC production rate on a mole per mole basis. These are the first observations of hydrogen production in permeable sediments, and support the fermentation hypothesis, as hydrogen is a typical product of fermentative pathways.

Environmental monitoring and assessment of heavy metals in surface sediments at Coleroon River Estuary in Tamil Nadu, India.

PubMed

Venkatramanan, S; Chung, S Y; Ramkumar, T; Selvam, S

2015-08-01

The combined studies on grain size distribution, organic matter contents of sediments, sequential extraction and bulk concentration of heavy metals, statistical analysis, and ecological risk assessments were carried out to investigate the contamination sources and ecological risks of surface sediments at Coleroon River Estuary in Tamil Nadu, India. The sequential extraction of metals showed that a larger portion of the metals was associated with the residual phase and also in other fractions. The low concentrations of heavy metals were found in exchangeable and carbonate bounds (bioavailable phases). It revealed that sediments of Coleroon River Estuary were relatively unpolluted and were influenced mainly by natural sources. The observed order of bulk concentrations of heavy metals in the sediments was as follows: Fe > Mn > Zn > Cu > Pb > Cr > Ni > Co. Factor analyses represented that the enrichment of heavy metals was mostly resulted from lithogenic origins associated with anthropogenic sources. These sources were reconfirmed by cluster analysis. Risk assessment code (RAC) suggested that all metals were not harmful in monsoon season. However, Fe was in medium risk, and Mn and Cu were in low risk in summer. According to pollution load index (PLI) of sediments, all heavy metals were toxic. Cu might be related with adverse biological effects on the basis of sediment quality guidelines (SQG) in both seasons. These integrated approaches were very useful to identify the contamination sources and ecological risks of sediments in estuarine environment. It is expected that this research can give a useful information for the remediation of heavy metals in sediments.

Quantifying postfire aeolian sediment transport using rare earth element tracers

USGS Publications Warehouse

Dukes, David; Gonzales, Howell B.; Ravi, Sujith; Grandstaff, David E.; Van Pelt, R. Scott; Li, Junran; Wang, Guan; Sankey, Joel B.

2018-01-01

Grasslands, which provide fundamental ecosystem services in many arid and semiarid regions of the world, are undergoing rapid increases in fire activity and are highly susceptible to postfire-accelerated soil erosion by wind. A quantitative assessment of physical processes that integrates fire-wind erosion feedbacks is therefore needed relative to vegetation change, soil biogeochemical cycling, air quality, and landscape evolution. We investigated the applicability of a novel tracer technique—the use of multiple rare earth elements (REE)—to quantify soil transport by wind and to identify sources and sinks of wind-blown sediments in both burned and unburned shrub-grass transition zone in the Chihuahuan Desert, NM, USA. Results indicate that the horizontal mass flux of wind-borne sediment increased approximately threefold following the fire. The REE tracer analysis of wind-borne sediments shows that the source of the horizontal mass flux in the unburned site was derived from bare microsites (88.5%), while in the burned site it was primarily sourced from shrub (42.3%) and bare (39.1%) microsites. Vegetated microsites which were predominantly sinks of aeolian sediments in the unburned areas became sediment sources following the fire. The burned areas showed a spatial homogenization of sediment tracers, highlighting a potential negative feedback on landscape heterogeneity induced by shrub encroachment into grasslands. Though fires are known to increase aeolian sediment transport, accompanying changes in the sources and sinks of wind-borne sediments may influence biogeochemical cycling and land degradation dynamics. Furthermore, our experiment demonstrated that REEs can be used as reliable tracers for field-scale aeolian studies.

Sediment processes modelling below hydraulic mining: towards environmental impact mitigation

NASA Astrophysics Data System (ADS)

Chalov, Sergey R.

2010-05-01

Placer mining sites are located in the river valleys so the rivers are influenced by mining operations. Frequently the existing mining sites are characterized by low contribution to the environmental technologies. Therefore hydraulic mining alters stream hydrology and sediment processes and increases water turbidity. The most serious environmental sequences of the sediment yield increase occur in the rivers populated by salmon fish community because salmon species prefer clean water with low turbidity. For instance, the placer mining in Kamchatka peninsula (Far East of Russia) which is regarded to be the last global gene pool of wild salmon Oncorhynchus threatens the rivers ecosystems. System of man-made impact mitigation could be done through the exact recognition of the human role in hydrological processes and sediment transport especially. Sediment budget of rivers below mining sites is transformed according to the appearance of the man-made non-point and point sediment sources. Non-point source pollution occurs due to soil erosion on the exposed hillsides and erosion in the channel diversions. Slope wash on the hillsides is absent during summer days without rainfalls and is many times increased during rainfalls and snow melting. The nearness of the sources of material and the rivers leads to the small time of suspended load increase after rainfalls. The average time of material intake from exposed hillsides to the rivers is less than 1 hour. The main reason of the incision in the channel diversion is river-channel straightening. The increase of channel slopes and transport capacity leads to the intensive incision of flow. Point source pollution is performed by effluents both from mining site (mainly brief effluents) and from settling ponds (permanent effluents), groundwater seepage from tailing pits or from quarries. High rate of groundwater runoff is the main reason of the technological ponds overfilling. Intensive filtration from channel to ponds because of their nearness determines the water mass increase inside mining site. The predictive models were suggested to assess each of the mane-made processes contribution into the total sediment budget of the rivers below mining sites. The empirical data and theoretical and laboratory-derived correlations were used to obtain the predictive models for each processes of sediment supply. It was challenging to estimate specific erosion rate of washed exposed hillsides, channel incision, water supply conditions. Climatic and anthropogenic changes of water runoff also were simulated to decrease uncertainty of the proposed model. Application of the given approach to the hydraulic platinum-mining located in the Kamchatka peninsula (Koryak plateau, tributaries of the Vivenka River) gave the sediment budget of the placer-mined rivers and the total sediment yield supplied into the ocean from river basin. Polluted placer-mined rivers contribute about 30 % of the whole sediment yield of the Vivenka River. At the same time the catchment area of these rivers is less than 0,03 % from the whole Vivenka catchment area. Based on the sediment transport modeling the decision making system for controlling water pollution and stream community preservation was developed. Due to exposed hillside erosion prevention and settling pond system optimization the total decrease of sediment yield was up to 75 %.

Photochemical dissolution of organic matter from resuspended sediments: Impact of source and diagenetic state on photorelease

NASA Astrophysics Data System (ADS)

Helms, J. R.; Glinski, D. A.; Mead, R. N.; Southwell, M.; Avery, G. B., Jr.; Kieber, R. J.; Skrabal, S. A.

2015-12-01

Resuspended sediments exposed to simulated solar radiation release dissolved organic carbon (DOC). However, it is unclear how the provenance of sedimentary organic matter (OM) impacts this photorelease. In the first geographically extensive study of this phenomenon, twenty three size fractionated, fine grained sediments (< ca. 10-20 μm) from a variety of drainage basins were resuspended (at suspended solid loading of 29- 255 mg/l) and exhibited a net photochemical DOC release ranging from 2 to 178 μmol/g/h. There was a logarithmic increase in photoreleased DOC vs. the proportion of sedimentary OC (%), most likely due to photon limitation at high sedimentary OC loading (i.e. high mass-specific absorption limiting light penetration). Sediment source and quality - determined using lipid biomarkers - had a significant effect on DOC photorelease. The fatty acid terrestrial aquatic ratio (TARFA) indicated that terrestrially derived sediments exhibited relatively greater DOC photorelease. The long chain carbon preference index (CPI24-34) indicated that diagenetically unaltered terrestrial OM photoreleased more DOC than diagenetically altered terrestrial OM. The short chain carbon preference index (CPI14-22) demonstrated that sediments containing diagenetically altered planktonic or algal derived OM had a greater photorelease rate of DOC than fresh algal OM. This suggests that humic substances (humus and/or adsorbed humic and fulvic acids) play an important role in the photochemical dissolution of OC regardless of whether or not they are imported from upstream (i.e. terrestrial humics) or generated within the depositional or sedimentary environment (i.e. humification of algal dissolved OM).

Impact of methane flow through deformable lake sediments on atmospheric release

NASA Astrophysics Data System (ADS)

Scandella, B.; Juanes, R.

2010-12-01

Methane is a potent greenhouse gas that is generated geothermally and biologically in lake and ocean sediments. Free gas bubbles may escape oxidative traps and contribute more to the atmospheric source than dissolved methane, but the details of the methane release depend on the interactions between the multiple fluid phases and the deformable porous medium. We present a model and supporting laboratory experiments of methane release through “breathing” dynamic flow conduits that open in response to drops in the hydrostatic load on lake sediments, which has been validated against a high-resolution record of free gas flux and hydrostatic pressure in Upper Mystic Lake, MA. In contrast to previous linear elastic fracture mechanics analysis of gassy sediments, the evolution of gas transport in a deformable compliant sediment is presented within the framework of multiphase poroplasticity. Experiments address how strongly the mode and rate of gas flow, captured by our model, impacts the size of bubbles released into the water column. A bubble's size in turn determines how efficiently it transports methane to the atmosphere, and integrating this effect will be critical to improving estimates of the atmospheric methane source from lakes. Cross-sectional schematic of lake sediments showing two venting sites: one open at left and one closed at right. The vertical release of gas bubbles (red) at the open venting site creates a local pressure drop, which drives both bubble formation from the methane-rich pore water (higher concentrations shaded darker red) and lateral advection of dissolved methane (purple arrows). Even as bubbles in the open site escape, those at the closed site remain trapped.

Controls on hillslope stability in a mountain river catchment

NASA Astrophysics Data System (ADS)

Golly, Antonius; Turowski, Jens; Hovius, Niels; Badoux, Alexandre

2015-04-01

Sediment transport in fluvial systems accounts for a large fraction of natural hazard damage costs in mountainous regions and is an important factor for risk mitigation, engineering and ecology. Although sediment transport in high-gradient channels gathered research interest over the last decades, sediment dynamics in steep streams are generally not well understood. For instance, the sourcing of the sediment and when and how it is actually mobilized is largely undescribed. In the Erlenbach, a mountain torrent in the Swiss Prealps, we study the mechanistic relations between in-channel hydrology, channel morphology, external climatic controls and the surrounding sediment sources to identify relevant process domains for sediment input and their characteristic scales. Here, we analyze the motion of a slow-moving landslide complex that was permanently monitored by time-lapse cameras over a period of 70 days at a 30 minutes interval. In addition, data sets for stream discharge, air temperature and precipitation rates are available. Apparent changes in the channel morphology, e.g. the destruction of channel-spanning bed forms, were manually determined from the time-lapse images and were treated as event marks in the time series. We identify five relevant types of sediment displacement processes emerging during the hillslope motion: concentrated mud flows, deep seated hillslope failure, catastrophic cavity failure, hillslope bank erosion and individual grain loss. Generally, sediment displacement occurs on a large range of temporal and spatial scales and sediment dynamics in steep streams not only depend on large floods with long recurrence intervals. We find that each type of displacement acts in a specific temporal and spatial domain with their characteristic scales. Different external climatic forcing (e.g. high-intensity vs. long-lasting precipitation events) promote different displacement processes. Stream morphology and the presence of boulders have a large effect on sediment input through deep seated failures and cavity failures while they have only minor impact on the other process types. In addition to large floods, which are generally recognized to produce huge amounts of sediment, we identify two relevant climatic regimes that play an important role for the sediment dynamics: a) long-lasting but low-intensity rainfall that explicitly trigger specific sediment displacement processes on the hillslopes and b) smaller discharge events with recurrence intervals of approximately one year that mobilize sediments from the hillslope's toes along the channel.

Sediment Flux from Source to Sink in the Brazos-Trinity Depositional System

NASA Astrophysics Data System (ADS)

Pirmez, C.; Prather, B. E.; Droxler, A.; Ohayer, W.

2007-12-01

During the Late Pleistocene a series of intra-slope basins offshore Texas in the Western Gulf of Mexico, received a high influx of clastic sediments derived primarily from the Brazos, Trinity, and Mississippi rivers. Sediment failures initiated at shelf edge deltas resulted in mass flows that negotiate a complex slope and basin topography caused by salt tectonics. Sediment locally fill ponded basins eventually spilling into subsequent basins downstream. Interaction between these flows and slope topography leads to a complex partitioning of sediment over time and space that can only be unraveled with high-resolution data. The availability of system-wide coverage with conventional 3d seismic surveys, a dense grid of high-resolution 2d seismic lines and cored wells from two of the four linked intraslope basins, makes this locale an ideal area to investigate the transfer of sediment across the continental margin, from river sources to the ultimate sink within an enclosed intraslope basin. Data from IODP Expedition 308 and industry wells, combined with data from previous studies on the shelf constrain an integrated seismic stratigraphic framework for the depositional system. Numerous radiocarbon age dates coupled with multiple stratigraphic tools (seismic-, bio-, and tephra correlations and oxygen isotope measurements) provide an unprecedented high-resolution chronology that allow for detailed estimation of sedimentation rates in this turbidite system and calculation of sediment volumes in each of the basins over time intervals of a few millennia during the late Pleistocene. We find that rates of sedimentation exceed 10 m/kyr during some periods of ultra-fast turbidite accumulation. Rates of channel incision and tectonic subsidence can also be calculated and are comparable to the rapid accumulation rates measured in the basin fill. Our observations indicate that while sealevel changes exert a first order control on delivery of sediment to the basins, the sedimentary record suggests that delta dynamics, basin tectonics and the interaction between gravity flows and basin topography are equally important in determining the distribution of sediments in time and space along this depositional system.

Fingerprinting the main erosion processes delivering sediment to hillside reservoirs: Case of Kamech catchment in Cape Bon, Tunisia

NASA Astrophysics Data System (ADS)

Ben Slimane, A.; Raclot, D.; Evrard, O.; Sanaa, M.; Lefèvre, I.; Ahmadi, M.; Le Bissonnais, Y.

2011-12-01

About 74% of agricultural soils are affected by water erosion in Tunisia. This intense soil degradation threatens the sustainability of food production in the country. It also leads to the siltation of the numerous hillslide reservoirs that were constructed in the 1990s to protect downstream villages against floods and provide a source of water in cultivated areas. Very dense gully systems are observed in Tunisian agricultural land and in other Mediterranean regions, but their contribution to contemporary sediment supply to hillside reservoirs has not been quantified yet. Still, there is a need to quantify the sediment sources in this region in order to guide the implementation of erosion control measures. Sediment can be supplied by gully systems but it can also be provided by erosion of the superficial layer of cultivated soil. We propose a methodology to estimate the relative contribution of gully erosion vs. interrill erosion to the sediment accumulated in hillside reservoirs. This work was conducted in a pilot catchment (i.e., Kamech catchment, 263ha, Cape Bon, Tunisia) to define guidelines on the number and the location of sediment core samples to collect in the reservoirs, in order to provide relevant information on the evolution of sediment sources throughout the last two decades. Once validated, this methodology will be applied to other catchments of the Tunisian Ridge. We applied the sediment fingerprinting method, which consists in measuring conservative and stable properties in both sources and sinks of sediment to outline their origin. Sampling efforts were concentrated on the field surface (cropland and grassland), gullies and channel banks. Thirteen sediment cores were collected along an upstream-downstream transect across Kamech hillside reservoir, in order to estimate the contribution of each potential sediment source to the material accumulated at the outlet, and to investigate the potential spatial differences of sediment origin across the reservoir. Concentration in two types of tracers (i.e., radionuclides and organic matter) was analyzed in all samples to provide potential fingerprinting properties, and a Monte Carlo mixing model was applied. Among the 11 potential tracers, 137Cs, total nitrogen and total organic carbon were selected. Application of the mixing model outlined that a mean homogenized sample provided similar information on the sediment origin as the analysis of all successive sediment layers observed in the core. We subsequently focused on the interpretation of the results obtained for those "mean" homogenised core samples. Those results showed that the dominant sources varied along the reservoir transect. However, the overall dominant source of sediment was interrill erosion. Soil conservation measures need therefore to be applied on cultivated land of Kamech catchment to limit siltation.

Contribution of sediment fluxes and transformations to the summer nitrogen budget of an Upper Mississippi River backwater system

USGS Publications Warehouse

James, W.F.; Richardson, W.B.; Soballe, D.M.

2008-01-01

Routing nitrate through backwaters of regulated floodplain rivers to increase retention could decrease loading to nitrogen (N)-sensitive coastal regions. Sediment core determinations of N flux were combined with inflow-outflow fluxes to develop mass balance approximations of N uptake and transformations in a flow-controlled backwater of the Upper Mississippi River (USA). Inflow was the dominant nitrate source (>95%) versus nitrification and varied as a function of source water concentration since flow was constant. Nitrate uptake length increased linearly, while uptake velocity decreased linearly, with increasing inflow concentration to 2 mg l-1, indicating limitation of N uptake by loading. N saturation at higher inflow concentration coincided with maximum uptake capacity, 40% uptake efficiency, and an uptake length 2 times greater than the length of the backwater. Nitrate diffusion and denitrification in sediment accounted for 27% of the backwater nitrate retention, indicating that assimilation by other biota or denitrification on other substrates were the dominant uptake mechanisms. Ammonium export from the backwater was driven by diffusive efflux from the sediment. Ammonium increased from near zero at the inflow to a maximum mid-lake, then declined slightly toward the outflow due to uptake during transport. Ammonium export was small compared to nitrate retention. ?? 2007 Springer Science+Business Media B.V.

Evaluation of a Sustainable Remediation Option: Beneficial Reuse of Petroleum-Contaminated Sediment as an Energy Source

EPA Science Inventory

The characteristics of petroleum-contaminated sediment (PCS) have been evaluated to assess whether the practice of its beneficial reuse as a sole or supplemental energy source is sustainable relative to other sediment remediation options such as monitored natural recovery (MNR), ...

Quantifying sediment provenance using multiple composite fingerprints in a small watershed in Oklahoma

USDA-ARS?s Scientific Manuscript database

Quantitative information on sediment provenance is badly needed for calibration and validation of process-based soil erosion models. However, sediment source data are rather limited due to difficulties in direct measurement of various source contributions at a watershed scale. The objectives are t...

The effect of grain size and surface area on organic matter, lignin and carbohydrate concentration, and molecular compositions in Peru Margin sediments

USGS Publications Warehouse

Bergamaschi, B.A.; Tsamakis, E.; Keil, R.G.; Eglinton, T.I.; Montlucon, D.B.; Hedges, J.I.

1997-01-01

A C-rich sediment sample from the Peru Margin was sorted into nine hydrodynamically-determined grain size fractions to explore the effect of grain size distribution and sediment surface area on organic matter content and composition. The neutral monomeric carbohydrate composition, lignin oxidation product yields, total organic carbon, and total nitrogen contents were determined independently for each size fraction, in addition to sediment surface area and abundance of biogenic opal. The percent organic carbon and percent total nitrogen were strongly related to surface area in these sediments. In turn, the distribution of surface area closely followed mass distribution among the textural size classes, suggesting hydrodynamic controls on grain size also control organic carbon content. Nevertheless, organic compositional distinctions were observed between textural size classes. Total neutral carbohydrate yields in the Peru Margin sediments were found to closely parallel trends in total organic carbon, increasing in abundance among grain size fractions in proportion to sediment surface area. Coincident with the increases in absolute abundance, rhamnose and mannose increased as a fraction of the total carbohydrate yield in concert with surface area, indicating these monomers were preferentially represented in carbohydrates associated with surfaces. Lignin oxidation product yields varied with surface area when normalized to organic carbon, suggesting that the terrestrially-derived component may be diluted by sorption of marine derived material. Lignin-based parameters suggest a separate source for terrestrially derived material associated with sand-size material as opposed to that associated with silts and clays. Copyright ?? 1997 Elsevier Science Ltd.

A comparative study of accumulation rates derived by He and Th isotope analysis of marine sediments

NASA Astrophysics Data System (ADS)

Marcantonio, Franco; Kumar, Niraj; Stute, Martin; Anderson, Robert F.; Seidl, Michele A.; Schlosser, Peter; Mix, Alan

1995-07-01

We present a detailed down-core analysis of helium isotope ratios and concentrations for bulk sediments from the central Equatorial Pacific that span the last two glacial-interglacial cycles. Measured 3He/4He ratios range from 1.0 × 10 -5 to 2.1 × 10 -4, or 7.4 to 149 times the atmospheric ratio. The 3He from interplanetary dust particles (IDPs) constitutes virtually all of the 3He measured within the sediment. Because carbonate accumulation rates are high in the Equatorial Pacific, the measured 3He concentrations are lower than have been measured elsewhere, and range from 4.7 × 10 -13 to 3.0 × 10 -12 cm 3STP · g -1. If the cosmic dust 3He-flux is constant with time, sediment mass accumulation rates can be determined from the 3He concentration in sediments. The excess 230Th technique is an entirely independent method for calculating sediment mass accumulation rates because its source is in-situ decay of 234U in seawater. To first order, initial excess 230Th activities correlate with 3He concentrations within this core. Based on the 230Th results, we estimate the 3He-flux to the Earth's surface as (9.6 ± 2.0) × 10 -16 cm 3STP · cm -2 · a -1. If this flux has remained constant over extended periods of time, it can be used to determine sediment accumulation rates beyond the 230Th range (300,000 yr).

Sediment matrix characterization as a tool for evaluating the environmental impact of heavy metals in metal mining, smelting, and ore processing areas.

PubMed

Ružičková, Silvia; Remeteiová, Dagmar; Mičková, Vladislava; Dirner, Vojtech

2018-02-21

In this work, the matrix characterization (mineralogy, total and local chemical composition, and total organic (TOC) and inorganic carbon (TIC) contents) of different types of sediments from mining- and metallurgy-influenced areas and the assessment of the impact of the matrix on the association of potentially hazardous metals with the mineral phases of these samples, which affect their mobility in the environment, are presented. For these purposes, sediment samples with different origins and from different locations in the environment were analyzed. Anthropogenic sediments from metal-rich post-flotation tailings (Lintich, Slovakia) represent waste from ore processing, natural river sediments from the Hornád River (Košice, Slovakia) represent areas influenced predominantly by the metallurgical industry, and lake sediments from a water reservoir Ružín (inflow from the Hornád and Hnilec Rivers, Slovakia) represent the impact of the metallurgical and/or mining industries. The total metal contents were determined by X-ray fluorescence (XRF) analysis, the local chemical and morphological microanalysis by scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and the TOC and TIC contents by infrared (IR) spectrometry. The mobility/bioavailability of Cu, Pb, and Zn in/from sediments at the studied areas was assessed by ethylenediaminetetraacetic acid (EDTA) and acetic acid (AA) extraction and is discussed in the context of the matrix composition. The contents of selected potentially hazardous elements in the extracts were determined by the high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS).

Uranium series isotopes concentration in sediments at San Marcos and Luis L. Leon reservoirs, Chihuahua, Mexico

NASA Astrophysics Data System (ADS)

Méndez-García, C.; Renteria-Villalobos, M.; García-Tenorio, R.; Montero-Cabrera, M. E.

2014-07-01

Spatial and temporal distribution of the radioisotopes concentrations were determined in sediments near the surface and core samples extracted from two reservoirs located in an arid region close to Chihuahua City, Mexico. At San Marcos reservoir one core was studied, while from Luis L. Leon reservoir one core from the entrance and another one close to the wall were investigated. 232Th-series, 238U-series, 40K and 137Cs activity concentrations (AC, Bq kg-1) were determined by gamma spectrometry with a high purity Ge detector. 238U and 234U ACs were obtained by liquid scintillation and alpha spectrometry with a surface barrier detector. Dating of core sediments was performed applying CRS method to 210Pb activities. Results were verified by 137Cs AC. Resulting activity concentrations were compared among corresponding surface and core sediments. High 238U-series AC values were found in sediments from San Marcos reservoir, because this site is located close to the Victorino uranium deposit. Low AC values found in Luis L. Leon reservoir suggest that the uranium present in the source of the Sacramento - Chuviscar Rivers is not transported up to the Conchos River. Activity ratios (AR) 234U/overflow="scroll">238U and 238U/overflow="scroll">226Ra in sediments have values between 0.9-1.2, showing a behavior close to radioactive equilibrium in the entire basin. 232Th/overflow="scroll">238U, 228Ra/overflow="scroll">226Ra ARs are witnesses of the different geological origin of sediments from San Marcos and Luis L. Leon reservoirs.

The effect of grain size and surface area on organic matter, lignin and carbohydrate concentration, and molecular compositions in Peru Margin sediments

NASA Astrophysics Data System (ADS)

Bergamaschi, Brian A.; Tsamakis, Elizabeth; Keil, Richard G.; Eglinton, Timothy I.; Montluçon, Daniel B.; Hedges, John I.

1997-03-01

A C-rich sediment sample from the Peru Margin was sorted into nine hydrodynamically-determined grain size fractions to explore the effect of grain size distribution and sediment surface area on organic matter content and composition. The neutral monomeric carbohydrate composition, lignin oxidation product yields, total organic carbon, and total nitrogen contents were determined independently for each size fraction, in addition to sediment surface area and abundance of biogenic opal. The percent organic carbon and percent total nitrogen were strongly related to surface area in these sediments. In turn, the distribution of surface area closely followed mass distribution among the textural size classes, suggesting hydrodynamic controls on grain size also control organic carbon content. Nevertheless, organic compositional distinctions were observed between textural size classes. Total neutral carbohydrate yields in the Peru Margin sediments were found to closely parallel trends in total organic carbon, increasing in abundance among grain size fractions in proportion to sediment surface area. Coincident with the increases in absolute abundance, rhamnose and mannose increased as a fraction of the total carbohydrate yield in concert with surface area, indicating these monomers were preferentially represented in carbohydrates associated with surfaces. Lignin oxidation product yields varied with surface area when normalized to organic carbon, suggesting that the terrestrially-derived component may be diluted by sorption of marine derived material. Lignin-based parameters suggest a separate source for terrestrially derived material associated with sand-size material as opposed to that associated with silts and clays.

Persistence of deeply sourced iron in the Pacific Ocean

PubMed Central

Horner, Tristan J.; Williams, Helen M.; Hein, James R.; Saito, Mak A.; Burton, Kevin W.; Halliday, Alex N.; Nielsen, Sune G.

2015-01-01

Biological carbon fixation is limited by the supply of Fe in vast regions of the global ocean. Dissolved Fe in seawater is primarily sourced from continental mineral dust, submarine hydrothermalism, and sediment dissolution along continental margins. However, the relative contributions of these three sources to the Fe budget of the open ocean remains contentious. By exploiting the Fe stable isotopic fingerprints of these sources, it is possible to trace distinct Fe pools through marine environments, and through time using sedimentary records. We present a reconstruction of deep-sea Fe isotopic compositions from a Pacific Fe−Mn crust spanning the past 76 My. We find that there have been large and systematic changes in the Fe isotopic composition of seawater over the Cenozoic that reflect the influence of several, distinct Fe sources to the central Pacific Ocean. Given that deeply sourced Fe from hydrothermalism and marginal sediment dissolution exhibit the largest Fe isotopic variations in modern oceanic settings, the record requires that these deep Fe sources have exerted a major control over the Fe inventory of the Pacific for the past 76 My. The persistence of deeply sourced Fe in the Pacific Ocean illustrates that multiple sources contribute to the total Fe budget of the ocean and highlights the importance of oceanic circulation in determining if deeply sourced Fe is ever ventilated at the surface. PMID:25605900

Persistence of deeply sourced iron in the Pacific Ocean.

PubMed

Horner, Tristan J; Williams, Helen M; Hein, James R; Saito, Mak A; Burton, Kevin W; Halliday, Alex N; Nielsen, Sune G

2015-02-03

Biological carbon fixation is limited by the supply of Fe in vast regions of the global ocean. Dissolved Fe in seawater is primarily sourced from continental mineral dust, submarine hydrothermalism, and sediment dissolution along continental margins. However, the relative contributions of these three sources to the Fe budget of the open ocean remains contentious. By exploiting the Fe stable isotopic fingerprints of these sources, it is possible to trace distinct Fe pools through marine environments, and through time using sedimentary records. We present a reconstruction of deep-sea Fe isotopic compositions from a Pacific Fe-Mn crust spanning the past 76 My. We find that there have been large and systematic changes in the Fe isotopic composition of seawater over the Cenozoic that reflect the influence of several, distinct Fe sources to the central Pacific Ocean. Given that deeply sourced Fe from hydrothermalism and marginal sediment dissolution exhibit the largest Fe isotopic variations in modern oceanic settings, the record requires that these deep Fe sources have exerted a major control over the Fe inventory of the Pacific for the past 76 My. The persistence of deeply sourced Fe in the Pacific Ocean illustrates that multiple sources contribute to the total Fe budget of the ocean and highlights the importance of oceanic circulation in determining if deeply sourced Fe is ever ventilated at the surface.

Using sediment budgets to investigate the pathogen flux through catchments.

PubMed

Whiteway, Tanya G; Laffan, Shawn W; Wasson, Robert J

2004-10-01

We demonstrate a materials budget approach to identify the main source areas and fluxes of pathogens through a landscape by using the flux of fine sediments as a proxyfor pathogens. Sediment budgets were created for three subcatchment tributaries of the Googong Reservoir in south-eastern New South Wales, Australia. Major inputs, sources, stores, and transport zones were estimated using sediment sampling, dam trap efficiency measures, and radionuclide tracing. Particle size analyses were used to quantify the fine-sediment component of the total sediment flux, from which the pathogen flux was inferred by considering the differences between the mobility and transportation of fine sediments and pathogens. Gullies were identified as important sources of fine sediment, and therefore of pathogens, with the pathogen risk compounded when cattle shelter in them during wet periods. The results also indicate that the degree of landscape modification influences both sediment and pathogen mobilization. Farm dams, swampy meadows and glades along drainage paths lower the flux of fine sediment, and therefore pathogens, in this landscape during low-flow periods. However, high-rainfall and high-flow events are likely to transport most of the fine sediment, and therefore pathogen, flux from the Googong landscape to the reservoir. Materials budgets are a repeatable and comparatively low-cost method for investigating the pathogen flux through a landscape.

Thorium-derived dust fluxes to the tropical Pacific Ocean, 58 Ma

NASA Astrophysics Data System (ADS)

Woodard, Stella C.; Thomas, Deborah J.; Marcantonio, Franco

2012-06-01

Eolian dust in pelagic deep sea sediments can be used to reconstruct ancient wind patterns and paleoenvironmental response to climate change. Traditional methods to determine dust accumulation involve isolating the non-dissolvable aluminosilicate minerals from deep sea sediments through a series of chemical leaches, but cannot differentiate between minerals from eolian, authigenic and volcanogenic sources. Other geochemical proxies, such as sedimentary 232Th and crustal 4He content, have been used to construct high-resolution records of atmospheric dust fluxes to the deep sea during the Quaternary. Here we use sedimentary Th content as a proxy for terrigenous material (eolian dust) in ˜58 Myr-old sediments from the Shatsky Rise (ODP Site 1209) and compare our results with previous dust estimates generated using the traditional chemical extraction method and sedimentary 4Hecrustal concentrations. We find excellent agreement between Th-based dust estimates and those generated using the traditional method. In addition our results show a correlation between sedimentary Th and 4Hecrustal content, which suggests a source older than present day Asian loess supplied dust to the central subtropical Pacific Ocean during the early Paleogene.

Evaluation of sediment contamination by monoaromatic hydrocarbons in the coastal lagoons of Gulf of Saros, NE Aegean Sea.

PubMed

Ünlü, Selma; Alpar, Bedri

2017-05-15

The concentrations and distribution of monoaromatic hydrocarbons (benzene, toluene, ethyl benzene and the sum of m-, p- and o-, xylenes) were determined in the sediments of coastal lagoons of the Gulf of Saros, using a static headspace GC-MS. The total concentrations of BTEX compounds ranged from 368.5 to below detection limit 0.6μgkg -1 dw, with a mean value of 61.5μgkg -1 dw. The light aromatic fraction of m-, p-xylene was the most abundant compound (57.1% in average), and followed by toluene (38.1%)>ethylbenzene (4.1%)>o-xylene (2.5%)>benzene (1.1%). The factor analysis indicated that the levels and distribution of BTEX compounds depend on the type of contaminant source (mobile/point), absorbance of compounds in sediment, and mobility of benzene compound and degradation processes. Point sources are mainly related to agricultural facilities and port activities while the dispersion of compounds are related with their solubility, volatility and effect of sea/saline waters on lagoons. Copyright © 2017. Published by Elsevier Ltd.

Petroleum pollution in surface sediments of Daya Bay, South China, revealed by chemical fingerprinting of aliphatic and alicyclic hydrocarbons

NASA Astrophysics Data System (ADS)

Gao, Xuelu; Chen, Shaoyong

2008-10-01

Nine surface sediments collected from Daya Bay have been Soxhlet-extracted with 2:1 (v/v) dichloromethane-methanol. The non-aromatic hydrocarbon (NAH) fraction of solvent extractable organic matter (EOM) and some bulk geochemical parameters have been analyzed to determine petroleum pollution of the bay. The NAH content varies from 32 to 276 μg g -1 (average 104 μg g -1) dry sediment and accounts for 5.8-64.1% (average 41.6%) of the EOM. n-Alkanes with carbon number ranging from 15 to 35 are identified to be derived from both biogenic and petrogenic sources in varying proportions. The contribution of marine authigenic input to the sedimentary n-alkanes is lower than the allochthonous input based on the average n-C 31/ n-C 19 alkane ratio. 25.6-46.5% of the n-alkanes, with a mean of 35.6%, are contributed by vascular plant wax. Results of unresolved complex mixture, isoprenoid hydrocarbons, hopanes and steranes also suggest possible petroleum contamination. There is strong evidence of a common petroleum contamination source in the bay.

Rainfall-induced runoff from exposed streambed sediments: an important source of water pollution.

PubMed

Frey, S K; Gottschall, N; Wilkes, G; Grégoire, D S; Topp, E; Pintar, K D M; Sunohara, M; Marti, R; Lapen, D R

2015-01-01

When surface water levels decline, exposed streambed sediments can be mobilized and washed into the water course when subjected to erosive rainfall. In this study, rainfall simulations were conducted over exposed sediments along stream banks at four distinct locations in an agriculturally dominated river basin with the objective of quantifying the potential for contaminant loading from these often overlooked runoff source areas. At each location, simulations were performed at three different sites. Nitrogen, phosphorus, sediment, fecal indicator bacteria, pathogenic bacteria, and microbial source tracking (MST) markers were examined in both prerainfall sediments and rainfall-induced runoff water. Runoff generation and sediment mobilization occurred quickly (10-150 s) after rainfall initiation. Temporal trends in runoff concentrations were highly variable within and between locations. Total runoff event loads were considered large for many pollutants considered. For instance, the maximum observed total phosphorus runoff load was on the order of 1.5 kg ha. Results also demonstrate that runoff from exposed sediments can be a source of pathogenic bacteria. spp. and spp. were present in runoff from one and three locations, respectively. Ruminant MST markers were also present in runoff from two locations, one of which hosted pasturing cattle with stream access. Overall, this study demonstrated that rainfall-induced runoff from exposed streambed sediments can be an important source of surface water pollution. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Strontium isotope record of seasonal scale variations in sediment sources and accumulation in low-energy, subtidal areas of the lower Hudson River estuary

USGS Publications Warehouse

Smith, J.P.; Bullen, T.D.; Brabander, D.J.; Olsen, C.R.

2009-01-01

Strontium isotope (87Sr/86Sr) profiles in sediment cores collected from two subtidal harbor slips in the lower Hudson River estuary in October 2001 exhibit regular patterns of variability with depth. Using additional evidence from sediment Ca/Sr ratios, 137Cs activity and Al, carbonate (CaCO3), and organic carbon (OCsed) concentration profiles, it can be shown that the observed variability reflects differences in the relative input and trapping of fine-grained sediment from seaward sources vs. landward sources linked to seasonal-scale changes in freshwater flow. During high flow conditions, the geochemical data indicate that most of the fine-grained sediments trapped in the estuary are newly eroded basin materials. During lower (base) flow conditions, a higher fraction of mature materials from seaward sources with higher carbonate content is trapped in the lower estuary. Results show that high-resolution, multi-geochemical tracer approaches utilizing strontium isotope ratios (87Sr/86Sr) can distinguish sediment sources and constrain seasonal scale variations in sediment trapping and accumulation in dynamic estuarine environments. Low-energy, subtidal areas such as those in this study are important sinks for metastable, short-to-medium time scale sediment accumulation. These results also show that these same areas can serve as natural recorders of physical, chemical, and biological processes that affect particle and particle-associated material dynamics over seasonal-to-yearly time scales. ?? 2009.

Can land use intensification in the Mallee, Australia increase the supply of soluble iron to the Southern Ocean?

PubMed Central

Bhattachan, Abinash; D'Odorico, Paolo

2014-01-01

The supply of soluble iron through atmospheric dust deposition limits the productivity of the Southern Ocean. In comparison to the Northern Hemisphere, the Southern Hemisphere exhibits low levels of dust activity. However, given their proximity to the Southern Ocean, dust emissions from continental sources in the Southern Hemisphere could have disproportionate impact on ocean productivity. Australia is the largest source of dust in the Southern Hemisphere and aeolian transport of dust has major ecological, economic and health implications. In the Mallee, agriculture is a major driver of dust emissions and dust storms that affect Southeastern Australia. In this study, we assess the dust generating potential of the sediment from the Mallee, analyze the sediment for soluble iron content and determine the likely depositional region of the emitted dust. Our results suggest that the Mallee sediments have comparable dust generating potential to other currently active dust sources in the Southern Hemisphere and the dust-sized fraction is rich in soluble iron. Forward trajectory analyses show that this dust will impact the Tasman Sea and the Australian section of the Southern Ocean. This iron-rich dust could stimulate ocean productivity in future as more areas are reactivated as a result of land-use and droughts. PMID:25109703

Modeling of land use and reservoir effects on nonpoint source pollution in a highly agricultural basin

USGS Publications Warehouse

Wu, Yiping; Liu, Shu-Guang

2012-01-01

Nonpoint source (NPS) pollution is tightly linked to land use activities that determine the sources and magnitudes of pollutant loadings to stream water. The pollutant loads may also be alleviated within reservoirs because of the physical interception resulting from changed hydrological regimes and other biochemical processes. It is important but challenging to assess the NPS pollution processes with human effects due to the measurement limitations. The objective of this study is to evaluate the effects of human activities such as land uses and reservoir operation on the hydrological and NPS pollution processes in a highly agricultural area-the Iowa River Basin-using the Soil and Water Assessment Tool (SWAT). The evaluation of model performance at multiple sites reveals that SWAT can consistently simulate the daily streamflow, and monthly/annual sediment and nutrient loads (nitrate nitrogen and mineral phosphorus) in the basin. We also used the calibrated model to estimate the trap efficiencies of sediment (~78%) and nutrients (~30%) in the Coralville Reservoir within the basin. These non-negligible effects emphasize the significance of incorporating the sediment and nutrient removal mechanisms into watershed system studies. The spatial quantification of the critical NPS pollution loads can help identify hot-spot areas that are likely locations for the best management practices.

Modeling of land use and reservoir effects on nonpoint source pollution in a highly agricultural basin.

PubMed

Wu, Yiping; Liu, Shuguang

2012-09-01

Nonpoint source (NPS) pollution is tightly linked to land use activities that determine the sources and magnitudes of pollutant loadings to stream water. The pollutant loads may also be alleviated within reservoirs because of the physical interception resulting from changed hydrological regimes and other biochemical processes. It is important but challenging to assess the NPS pollution processes with human effects due to the measurement limitations. The objective of this study is to evaluate the effects of human activities such as land uses and reservoir operation on the hydrological and NPS pollution processes in a highly agricultural area-the Iowa River Basin-using the Soil and Water Assessment Tool (SWAT). The evaluation of model performance at multiple sites reveals that SWAT can consistently simulate the daily streamflow, and monthly/annual sediment and nutrient loads (nitrate nitrogen and mineral phosphorus) in the basin. We also used the calibrated model to estimate the trap efficiencies of sediment (∼78%) and nutrients (∼30%) in the Coralville Reservoir within the basin. These non-negligible effects emphasize the significance of incorporating the sediment and nutrient removal mechanisms into watershed system studies. The spatial quantification of the critical NPS pollution loads can help identify hot-spot areas that are likely locations for the best management practices.

Bioaccumulation of hydrocarbons derived from terrestrial and anthropogenic sources in the Asian clam, Potamocorbula amurensis, in San Francisco Bay estuary

USGS Publications Warehouse

Pereira, Wilfred E.; Hostettler, Frances D.; Rapp, John B.

1992-01-01

An assessment was made in Suisun Bay, California, of the distributions of hydrocarbons in estuarine bed and suspended sediments and in the recently introduced asian clam, Potamocorbula amurensis. Sediments and clams were contaminated with hydrocarbons derived from petrogenic and pyrogenic sources. Distributions of alkanes and of hopane and sterane biomarkers in sediments and clams were similar, indicating that petroleum hydrocarbons associated with sediments are bioavailable to Potamocorbula amurensis. Polycyclic aromatic hydrocarbons in the sediments and clams were derived mainly from combustion sources. Potamocorbula amurensis is therefore a useful bioindicator of hydrocarbon contamination, and may be used as a biomonitor of hydrocarbon pollution in San Francisco Bay.

Trace metal pollution and carbon and nitrogen isotope tracing through the Yongdingxin River estuary in Bohai Bay, Northern China.

PubMed

Sun, Conghui; Wei, Qi; Ma, Lixia; Li, Li; Wu, Guanghong; Pan, Ling

2017-02-15

A tide gate was built in 2010 to prevent seawater from moving upstream into the Yongdingxin River estuary in Bohai Bay, Northern China. We analysed the concentrations of Hg, Cd, Pb, TOC, TN, δ 13 C and δ 15 N and studied their variations in the surface layer and vertical profiles of sediment cores collected from the Yongdingxin River estuary. Contamination factors and geo-accumulation indices were calculated for each metal, which revealed high levels of contamination for Hg and Cd in the sediments, likely from anthropogenic sources. δ 13 C and δ 15 N were used as natural tracers to determine the sources of TOC and TN. The results revealed that sewage was the main source of TOC, while TN may have more than one source in the Yongdingxin River estuary. Sewage dominated trace metal pollution in the Yongdingxin River estuary. Our results provide a baseline for trace metal contamination in an estuary facing a large water project. Copyright © 2016 Elsevier Ltd. All rights reserved.

Geochemical signature of provenance, tectonics and chemical weathering in the Quaternary flood plain sediments of the Hindon River, Gangetic plain, India

NASA Astrophysics Data System (ADS)

Mondal, M. E. A.; Wani, H.; Mondal, Bulbul

2012-09-01

The Ganga basin in the Himalayan foreland is a part of the world's largest area of modern alluvial sedimentation. Flood plain sediments of the Hindon River of the Gangetic plain have been analyzed for sediment texture, major and trace elements including rare earth elements (REEs). The results have been used to characterize the source rock composition and to understand the intensity of chemical weathering, tectonics and their interplay in the Hindon flood plain. The sediments of the Hindon flood plain dominantly consist of sand sized particles with little silt and clay. The geochemistry of the Hindon sediments has been compared to the Siwalik mudstone of the Siwalik Group (Siwaliks). The Siwalik sedimentary rocks like sandstones, mudstones and conglomerates are the known source rocks for the Hindon flood plain sediments. Mudstone geochemistry has been considered best to represent the source rock characteristics. The UCC (Upper Continental Crust) normalized major and trace elements of the Hindon flood plain sediments are very similar to the Siwalik mudstone except for Th and Cr. Furthermore, the average chondrite normalized REE pattern of the Hindon flood plain sediments is similar to the Siwalik mudstone. Textural immaturity, K/Rb ratios and the average CIA (Chemical Index of Alteration) and PIA (Plagioclase Index of Alteration) values of the Hindon flood plain sediments indicate that the sediments have not been affected by chemical weathering. Our study suggests that the active tectonics of the Himalayas and monsoon climate enhances only physical erosion of the source rocks (Siwaliks) rather than the chemical alteration. These factors help the Hindon sediments to retain their parental and tectonic signature even after recycling.

An assessment of injury to sediments and sediment-dwelling organisms in the Grand Calumet River and Indiana Harbor Area of Concern, USA.

PubMed

MacDonald, D D; Ingersoll, C G; Smorong, D E; Lindskoog, R A; Sparks, D W; Smith, J R; Simon, T P; Hanacek, M A

2002-08-01

This article is the first in a series of three that describe the results of a Natural Resource Damage Assessment (NRDA) conducted in the Grand Calumet River and Indiana Harbor Area of Concern (IHAOC). The assessment area is located in northwest Indiana and was divided into nine reaches to facilitate the assessment. This component of the NRDA was undertaken to determine if sediments and sediment-dwelling organisms have been injured due to exposure to contaminants that have accumulated in sediments as a result of discharges of oil or releases of other hazardous substances from industrial, municipal, and nonpoint sources. To support this assessment, information was compiled on the chemical composition of sediment and pore water; on the toxicity of whole sediments, pore water, and elutriates; and on the status of benthic invertebrate communities. The data on each of these indicators were compared to regionally relevant benchmarks to assess the presence and extent of injury to surface water resources ( i.e., sediments) or biological resources ( i.e., sediment-dwelling organisms). The results of this assessment indicate that sediment injury has occurred throughout the assessment area, with up to four distinct lines of evidence demonstrating injury within the various reaches. The primary contaminants of concern ( i.e., those substances that are present at concentrations that are sufficient to cause or substantially contribute to sediment injury) include metals, polycyclic aromatic hydrocarbons, and total polychlorinated biphenyls.

Determination of selected heavy metal concentrations and distribution in a southwestern stream using macrophytes.

PubMed

Martinez, Edward A; Shu-Nyamboli, Chemanji

2011-09-01

Since the reduction of the arsenic standard from 50 to 10 μg L(-1) by the US Environmental Protection Agency in 2006 many small town and rural water municipalities were left with the task of preventing or mitigating arsenic contamination of drinking water supplies. In this study macrophytes and sediments were used to determine the concentration and distribution of heavy metals (As, Cd, Cu, Pb, and Zn) within the primary source of drinking water (Gallinas River watershed) to the residents of Las Vegas, New Mexico. Sampling was done in the spring and fall at four sites, two above the city and two below, and samples were analyzed using ICP-MS. Results showed significantly higher (p<.05) metal concentrations in plant roots than shoots for most metals. Spearman's correlation showed positive correlations (r>.3) between plant and sediment concentrations of Cd, Pb, Zn, As, and a negative correlation for Cu. The site above waste water treatment plant (AWWTP) had the highest plant tissue concentrations of Cd, Pb, Zn, and As. All of these concentrations attained critical toxicity levels exceeding sediment quality guidelines. High concentration factor values and levels of metals detected in macrophyte tissues indicate that heavy metals within sediments in the Gallinas River occur in bioavailable forms. Correlations between plant and sediment metal concentrations indicate that metal concentrations in macrophyte tissues are a good reflection of metal concentrations within the sediment in the Gallinas River. Copyright © 2011 Elsevier Inc. All rights reserved.

Radioecologycal study of {sup 239/240}Pu in Bangka Island and Muria Peninsula: Determination of {sup 239/240}Pu in marine sediment and seawater as part of baseline data collecting for sitting of candidates of first Indonesia NPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suseno, Heny, E-mail: henis@batan.go.id; Wisnubroto, Djarot S.

Radioisotope Pu-239/240 are alpha emitting nuclides important indicators of radioactive contamination of the marine environment. Global fallout is the main source of plutonium in the marine environment. There are very limited study on {sup 239/240}Pu in Indonesia coastal environments. The data of this radioisotopes is needed for baseline data of nuclear power plant (NPP) site candidates both in Bangka Island and Muria Peninsula. Bottom sediments play an important role in radioecological studies of the marine environment because a large proportion of radioactive substances entering the sea is adsorbed over time onto suspended particulate matter and deposited in sediments. Plutonium ismore » particle reactive and deposited in marine sediment. Radioisotope {sup 239/240}Pu was determinated by alpha spectrometry after radiochemical procedure that was performed in both water and marine sediment from Bangka Island and Muria Peninsula. The sediment baseline of concentration {sup 239/240}Pu in Bangka Island and Muria Peninsula were range from 0.013 to 0.021 Bq.kg{sup −1} and 0.018 to 0.024 Bq.kg{sup −1} respectively. The water baseline concentration this isotope were range from 2.73 to 4.05 mBq.m{sup −3} and 2.98 to 4.50 mBq.m{sup −3}.« less

Soil surface lowering due to soil erosion in villages near Lake Victoria, Uganda

NASA Astrophysics Data System (ADS)

de Meyer, A.; Deckers, J.; Poesen, J.; Isabirye, M.

2009-04-01

In the effort to pinpoint the sources of sediment pollution in Lake Victoria, the contribution of sedi-ment from compounds, landing sites, main roads and footpaths is determined in the catchment of Na-bera Bay and Kafunda Bay at the northern shore of Lake Victoria in southern Uganda. The amount of soil loss in compounds and landing sites is determined by the reconstruction of the original and current soil surface according to botanical and man-made datable objects. The soil erosion rate is then deter-mined by dividing the eroded soil volume (corrected for compaction) by the age of the oldest datable object. In the study area, the average soil erosion rate in compounds amounts to 107 Mg ha-1 year-1 (per unit compound) and in landing sites to 207 Mg ha-1 year-1 (per unit landing site). Although com-pounds and landing sites occupy a small area of the study area (1.1 %), they are a major source of sediment to Lake Victoria (63 %). The soil loss on footpaths and main roads is calculated by multip-lying the total length of footpaths and main roads with the average width and depth (measured towards a reference surface). After the correction for compaction is carried out, the soil erosion rate on foot-paths amounts to 34 Mg ha-1 year-1 and on main roads to 35 Mg ha-1 year-1. Also footpaths and main roads occupy a small area of the study area (1.1 %), but contribute disproportionately to the total soil loss in the catchment (22 %). In this research, the information about the village/compound given by the villager/owner is indispensable. In accordance to an adaptation of the model of McHugh et al. (2002), 32 % of the sediment that is generated in the catchment, is deposited in Lake Victoria (i.e. 2 209 Mg year-1 or 0.7 Mg ha-1 year-1). The main buffer in the study area is papyrus at the shore of Lake Victoria. Also sugarcane can be a major buffer. However, the sugarcane-area is intersected by com-pounds, landing sites, footpaths and main roads that generate large amounts of sediment and function as main bypass mechanisms (high CR) facilitating and enhancing sediment delivery to Lake Victoria.

Provenance of aeolian sands in the Hetao Plain, northwestern China

NASA Astrophysics Data System (ADS)

Yang, Xingchen; Cai, Maotang; Ye, Peisheng; Ye, Mengni; Li, Chenglu; Wu, Hang; Lu, Jing; Wang, Tao; Zhao, Zhirong; Luzhou, Yangfan; Liu, Chao

2018-06-01

Patches of aeolian sand are distributed throughout the Hetao Plain, which pose threats to farming and agriculture. Identification of the provenance of the aeolian sands may help with efforts to alleviate ecological stress in Inner Mongolia and in the paleoenvironmental interpretation of sandy sequences. This study uses geochemical data to determine the provenance of aeolian sands from the Hetao Plain. Provenance discrimination diagrams revealed that the aeolian sands were mainly derived from mixed source felsic granites and granodiorites, which have undergone weak sedimentary recycling. The chemical index of alteration and A-CN-K data indicated that the aeolian sediments were transported over a short distance. Comparison of trace element and rare earth element (REE) ratios of the aeolian sands with rock samples from potential source areas has revealed that aeolian sand deposits in the Hetao Plain were mainly derived from Sertengshan and Yellow River sediments. The Langshan and Ordos Plateau may represent additional sand sources for the Hetao Plain.

Predicting fire effects on water quality: a perspective and future needs

NASA Astrophysics Data System (ADS)

Smith, Hugh; Sheridan, Gary; Nyman, Petter; Langhans, Christoph; Noske, Philip; Lane, Patrick

2017-04-01

Forest environments are a globally significant source of drinking water. Fire presents a credible threat to the supply of high quality water in many forested regions. The post-fire risk to water supplies depends on storm event characteristics, vegetation cover and fire-related changes in soil infiltration and erodibility modulated by landscape position. The resulting magnitude of runoff generation, erosion and constituent flux to streams and reservoirs determines the severity of water quality impacts in combination with the physical and chemical composition of the entrained material. Research to date suggests that most post-fire water quality impacts are due to large increases in the supply of particulates (fine-grained sediment and ash) and particle-associated chemical constituents. The largest water quality impacts result from high magnitude erosion events, including debris flow processes, which typically occur in response to short duration, high intensity storm events during the recovery period. Most research to date focuses on impacts on water quality after fire. However, information on potential water quality impacts is required prior to fire events for risk planning. Moreover, changes in climate and forest management (e.g. prescribed burning) that affect fire regimes may alter water quality risks. Therefore, prediction requires spatial-temporal representation of fire and rainfall regimes coupled with information on fire-related changes to soil hydrologic parameters. Recent work has applied such an approach by combining a fire spread model with historic fire weather data in a Monte Carlo simulation to quantify probabilities associated with fire and storm events generating debris flows and fine sediment influx to a reservoir located in Victoria, Australia. Prediction of fire effects on water quality would benefit from further research in several areas. First, more work on regional-scale stochastic modelling of intersecting fire and storm events with landscape zones of erosion vulnerability is required to support quantitative evaluation of water quality risk and the effect of future changes in climate and land management. Second, we underscore previous calls for characterisation of landscape-scale domains to support regionalisation of parameter sets derived from empirical studies. Recent examples include work identifying aridity as a control of hydro-geomorphic response to fire and the use of spectral-based indices to predict spatial heterogeneity in ash loadings. Third, information on post-fire erosion from colluvial or alluvial stores is needed to determine their significance as both sediment-contaminant sinks and sources. Such sediment stores may require explicit spatial representation in risk models for some environments and sediment tracing can be used to determine their relative importance as secondary sources. Fourth, increased dating of sediment archives could provide regional datasets of fire-related erosion event frequency. Presently, the lack of such data hinders evaluation of risk models linking fire and storm events to erosion and water quality impacts.

Methane flux from coastal salt marshes

NASA Technical Reports Server (NTRS)

Bartlett, K. B.; Harriss, R. C.; Sebacher, D. I.

1985-01-01

It is thought that biological methanogenesis in natural and agricultural wetlands and enteric fermentation in animals are the dominant sources of global tropospheric methane. It is pointed out that the anaerobic soils and sediments, where methanogenesis occurs, predominate in coastal marine wetlands. Coastal marine wetlands are generally believed to be approximately equal in area to freshwater wetlands. For this reason, coastal marine wetlands may be a globally significant source of atmospheric methane. The present investigation is concerned with the results of a study of direct measurements of methane fluxes to the atmosphere from salt marsh soils and of indirect determinations of fluxes from tidal creek waters. In addition, measurements of methane distributions in coastal marine wetland sediments and water are presented. The results of the investigation suggest that marine wetlands provide only a minor contribution to atmospheric methane on a global scale.

Distribution and sources of polycyclic aromatic hydrocarbons and phthalic acid esters in water and surface sediment from the Three Gorges Reservoir.

PubMed

Lin, Li; Dong, Lei; Meng, Xiaoyang; Li, Qingyun; Huang, Zhuo; Li, Chao; Li, Rui; Yang, Wenjun; Crittenden, John

2018-07-01

After the impoundment of the Three Gorges Reservoir (TGR), the hydrological situation of the reservoir has changed greatly. The concentration and distribution of typical persistent organic pollutants in water and sediment have also changed accordingly. In this study, the concentration, distribution and potential sources of 16 polycyclic aromatic hydrocarbons (PAHs) and 6 phthalic acid esters (PAEs) during the water drawdown and impoundment periods were investigated in water and sediment from the TGR. According to our results, PAHs and PAEs showed temporal and spatial variations. The mean ΣPAH and ΣPAE concentrations in water and sediment were both higher during the water impoundment period than during the water drawdown period. The water samples from the main stream showed larger ΣPAH concentration fluctuations than those from tributaries. Both the PAH and PAE concentrations meet the Chinese national water environmental quality standard (GB 3838-2002). PAH monomers with 2-3 rings and 4 rings were dominant in water, and 4-ring and 5-6-ring PAHs were dominant in sediment. Di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) were the dominant PAE pollutants in the TGR. DBP and DEHP had the highest concentrations in water and sediment, respectively. The main source of PAHs in water from the TGR was petroleum and emissions from coal and biomass combustion, whereas the main sources of PAHs in sediments included coal and biomass combustion, petroleum, and petroleum combustion. The main source of PAEs in water was domestic waste, and the plastics and heavy chemical industries were the main sources of PAEs in sediment. Copyright © 2017. Published by Elsevier B.V.

Artificial soft sediment resuspension and high density opportunistic macroalgal mat fragmentation as method for increasing sediment zoobenthic assemblage diversity in a eutrophic lagoon.

PubMed

Martelloni, Tatiana; Tomassetti, Paolo; Gennaro, Paola; Vani, Danilo; Persia, Emma; Persiano, Marco; Falchi, Riccardo; Porrello, Salvatore; Lenzi, Mauro

2016-09-15

Superficial soft sediment resuspension and partial fragmentation of high density opportunistic macroalgal mats were investigated by boat to determine the impact on zoobenthic assemblages in a eutrophic Mediterranean lagoon. Sediment resuspension was used to oxidise superficial organic sediments as a method to counteract the effects of eutrophication. Likewise, artificial decay of macroalgal mat was calculated to reduce a permanent source of sediment organic matter. An area of 9ha was disturbed (zone D) and two other areas of the same size were left undisturbed (zones U). We measured chemical-physical variables, estimated algal biomass and sedimentary organic matter, and conducted qualitative and quantitative determinations of the zoobenthic species detected in sediment and among algal mats. The results showed a constant major reduction in labile organic matter (LOM) and algal biomass in D, whereas values in U remained stable or increased. In the three zones, however, bare patches of lagoon bed increased in size, either by direct effect of the boats in D or by anaerobic decay of the algal mass in U. Zoobenthic assemblages in algal mats reduced the number of species in D, probably due to the sharp reduction in biomass, but remained stable in U, whereas in all three areas abundance increased. Sediment zoobenthic assemblages increased the number of species in D, as expected, due to drastic reduction in LOM, whereas values in U remained stable and again abundance increased in all three zones. In conclusion, we confirmed that reduction of sediment organic load enabled an increase in the number of species, while the algal mats proved to be an important substrate in the lagoon environment for zoobenthic assemblages, especially when mat alternated with bare intermat areas of lagoon bed. Sediment resuspension is confirmed as a management criterion for counteracting the effects of eutrophication and improving the biodiversity of zoobenthic assemblages in eutrophic lagoon environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Suspended sediment load in northwestern South America (Colombia): A new view on variability and fluxes into the Caribbean Sea

NASA Astrophysics Data System (ADS)

Restrepo López, Juan Camilo; Orejarena R, Andrés F.; Torregroza, Ana Carolina

2017-12-01

Monthly averaged suspended sediment load data from seven rivers in northern Colombia (Caribbean alluvial plain) draining into the Caribbean Sea were analyzed to quantify magnitudes, estimate long-term trends, and evaluate variability patterns of suspended sediment load. Collectively these rivers deliver an average of around 146.3 × 106 t yr-1 of suspended sediments to the Colombian Caribbean coast. The largest sediment supply is provided by the Magdalena River, with a mean suspended sediment load of 142.6 × 106 t yr-1, or 38% of the total fluvial discharge estimated for the whole Caribbean littoral zone. Between 2000 and 2010, the annual suspended sediment load of these rivers increased by as much as 36%. Wavelet spectral analyses identified periods of intense variability between 1987-1990 and 1994-2002, where major oscillation processes appeared simultaneously. The semi-annual, annual and quasi-decadal bands are the main factors controlling suspended sediment load variability in fluvial systems, whereas the quasi-biennial and interannual bands constitute second-order sources of variability. The climatic and oceanographic drivers of the oscillations identified through wavelet spectral analyses define a signal of medium-long-term variability for the suspended sediment load, while the physiographic and environmental characteristics of the basins determine their ability to magnify, attenuate or modify this signal.

Spatial variability of sediment erosion processes using GIS analysis within watersheds in a historically mined region, Patagonia Mountains, Arizona

USGS Publications Warehouse

Brady, Laura M.; Gray, Floyd; Wissler, Craig A.; Guertin, D. Phillip

2001-01-01

In this study, a geographic information system (GIS) is used to integrate and accurately map field studies, information from remotely sensed data, watershed models, and the dispersion of potentially toxic mine waste and tailings. The purpose of this study is to identify erosion rates and net sediment delivery of soil and mine waste/tailings to the drainage channel within several watershed regions to determine source areas of sediment delivery as a method of quantifying geo-environmental analysis of transport mechanisms in abandoned mine lands in arid climate conditions. Users of this study are the researchers interested in exploration of approaches to depicting historical activity in an area which has no baseline data records for environmental analysis of heavily mined terrain.

The carbon isotope biogeochemistry of methane production in anoxic sediments. 1: Field observations

NASA Technical Reports Server (NTRS)

Blair, Neal E.; Boehme, Susan E.; Carter, W. Dale, Jr.

1993-01-01

The natural abundance C-13/C-12 ratio of methane from anoxic marine and freshwater sediments in temperate climates varies seasonally. Carbon isotopic measurements of the methanogenic precursors, acetate and dissolved inorganic carbon, from the marine sediments of Cape Lookout Bight, North Carolina were used to determine the sources of the seasonal variations at that site. Movement of the methanogenic zone over an isotopic gradient within the dissolved CO2 pool appears to be the dominant control of the methane C-13/C-12 ratio from February to June. The onset of acetoclastic methane-production is a second important controlling process during mid-summer. An apparent temperature dependence on the fractionation factor for CO2-reduction may have a significant influence on the isotopic composition of methane throughout the year.

Loads of suspended sediment and nutrients from local nonpoint sources to the tidal Potomac River and Estuary, Maryland and Virginia, 1979-81 water years

USGS Publications Warehouse

Hickman, R. Edward

1987-01-01

Loads of suspended sediment, phosphorus, nitrogen, biochemical oxygen demand, and dissolved silica discharged to the tidal Potomac River and Estuary during the !979-81 water years from three local nonpoint sources have been calculated. The loads in rain falling directly upon the tidal water surface and from overflows of the combined sewer system of the District of Columbia were determined from available information. Loads of materials in the streamflow from local watersheds draining directly to the tidal Potomac River and Estuary downstream from Chain Bridge in Washington, D.C., were calculated from samples of streamflow leaving five monitored watersheds. Average annual yields of substances leaving three urban watersheds (Rock Creek and the Northwest and Northeast Branches of the Anacostia River) and the rural Saint Clements Creek watershed were calculated either by developing relationships between concentration and streamflow or by using the mean of measured concentrations. Yields calculated for the 1979-81 water years are up to 2.3 times period-of-record yields because of greater than average streamflow and stormflow during this 3-year period. Period-of-record yields of suspended sediment from the three urban watersheds and the Saint Clements Creek watershed do not agree with yields reported by other studies. The yields from the urban watersheds are 17 to 51 percent of yields calculated using sediment-concentration data collected during the 1960-62 water years. Previous studies suggest that this decrease is at least partly due to the imposition of effective sediment controls at construction sites and to the construction of two multipurpose reservoirs. The yield calculated for the rural Saint Clements Creek watershed is at least twice the yields calculated for other rural watersheds, a result that may be due to most of the samples of this stream being taken during the summer of the 1981 water year, a very dry period. Loads discharged from all local tributary watersheds to the tidal Potomac River and Estuary during the 1979-81 water years were calculated by applying to the unsampled watersheds the yields determined for the monitored watersheds. The resulting loads are 2.7 million megagrams of suspended sedi- ment, 3,100 megagrams of phosphorus, 14,000 megagrams of nitrogen, 74,000 megagrams of ultimate biochemical oxygen demand, and 68,000 megagrams of dissolved silica. The value for the load of sediment is probably an overestimate because the sediment yield calculated for the Saint Clements Creek watershed does not appear to be representative of rural watersheds. Summed, the loads discharged from all local nonpoint sources (local tributary watersheds, rainfall, and combined sewer overflows) to the tidal Potomac River and Estuary during the 1979-81 water years are 2.7 million megagrams of suspended sediment, 3,300 megagrams of phosphorus, 18,000 megagrams of nitrogen, 78,000 megagrams of ultimate biochemical oxygen demand, and 69,000 megagrams of dissolved silica. These loads accounted for 17 to 38 percent of the loads discharged by major sources during this period.

Sediment provenance in the Laxmi Basin of the Arabian Sea during the last 800 kyrs

NASA Astrophysics Data System (ADS)

Khim, B. K.; Horikawa, K.; Asahara, Y.; Kim, J. E.; Ikehara, M.; Lee, J.

2017-12-01

International Ocean Discovery Program Expedition 355 conducted to drill 1109.4 m penetration at Site U1456 in the Laxmi Basin of the Arabian Sea. Four lithologic units are defined onboard at Site U1456 (Pandey et al., 2016). Unit I is 121 m long, consisting mostly of pelagic carbonates (nannofossil ooze and/or foraminifera-rich nannofossil ooze) interbedded with thin terrigenous (clay, silt, and sand) turbidite layers. The age model of Unit I was determined by the correlation of δ18O fluctuations of planktonic foraminifera (Globigerinoides ruber) to LR04 stacks, estimating 1.2 Ma. A total of 60 samples, collected in the context of magnetic susceptibility (MS) changes at a discrete interval from a composite section (Holes U1456A and U1456C) of Unit I, were analyzed to measure Nd and Sr isotopes of detrital fraction. Based on Nd and Sr isotopes, the sediment provenance in the Laxmi Basin during the last 800 kyrs was traced in response to the monsoon activity between the interglacial and glacial periods. ɛNd and 87Sr/86Sr vary in a range from -12.4 to -8.0 and from 0.712 to 0.727, respectively. The correlation between ɛNd and 87Sr/86Sr is quite linear, indicating that the sediments were provided mainly by two dominant sources. Considering the ɛNd and 87Sr/86Sr end-members of sediment sources (i.e., river sediments), the Tapi River and Narmada River are the main contributors of sediments to Site U1456 with a little influence by the modern Indus River. However, the glacial sediments from the Indus River and the Mahi River may supply an additional fraction, leading to less ɛNd and more 87Sr/86Sr at Site U1456. Judged by the sediment sources, the sediments in the Laxmi Basin are characterized by the mixture of different provenances. In addition, it should be noted that the low ɛNd and high 87Sr/86Sr values coincide largely with high MS and vice versa, irrespectively of the glacial-interglacial change. Thus, rather than the sediment provenances, ɛNd and 87Sr/86Sr values of the detrital fraction in the Laxmi Basin of the Arabian Sea have been more controlled by the sedimentary processes (pelagic, hemi-pelagic and turbidite) and depositional conditions related with the sea level changes in response to the Arabian Sea monsoon activity between the glacial and interglacial periods during the last 800 kyrs.

Sediment budgeting and restoration planning in a heterogeneous landscape, the Root River watershed, southeastern Minnesota.

NASA Astrophysics Data System (ADS)

Hemmis, J. M.; Souffront, M.; Stout, J. C.; Belmont, P.

2014-12-01

Excessive sedimentation in streams and rivers is one of the top water quality concerns in the U.S. and globally. While sediment is a natural constituent of stream ecosystems, excessive amounts cause high levels of turbidity which can reduce primary and secondary production, reduce nutrient retention, and have negative impacts on fish reproduction and physiology. Fine sediment particles adsorb pollutants such as mercury, metals, polychlorinated biphenyl compounds and bacteria. Key questions remain regarding the origin of excessive sediment as well as the transport pathways of sediment through the landscape and channel network of the 4,300 km2 Root River watershed in southeastern Minnesota. To answer these questions, we are developing a sediment budget to account for inputs, outputs, and changes in sediment storage reservoirs within the system. Because watershed sediment fluxes are determined as the sum of many small changes (erosion and deposition) across a vast area, multiple, redundant techniques are required to adequately constrain all parts of the sediment budget. Specifically, this budget utilizes four years of field research and surveys, an extensive set of sediment fingerprinting data, watershed-wide measurements of channel widening and meander migration, and watershed modeling, all evaluated and extrapolated in a geomorphically sensitive manner. Analyses of sediment deposition within channel cutoffs throughout the watershed help constrain sediment storage. These overlapping methods, reconciled within the hard constraint of direct measurements of water and sediment fluxes, improve the reliability of the budget. The sediment budget highlights important sources and sinks and identifies locations that are likely to be more, or less, sensitive to changes in land and water management to support watershed-wide prioritization of conservation and restoration actions.

Sediment connectivity at source-bordering aeolian dunefields along the Colorado River in the Grand Canyon, USA

NASA Astrophysics Data System (ADS)

Sankey, Joel; Kasprak, Alan; Caster, Joshua; East, Amy; Fairley, Helen

2017-04-01

Aeolian dunefields that are primarily built and maintained with river-derived sediment are found in many river valleys throughout the world and are impacted by changes in climate, land use, and river regulation. Quantifying the dynamic response of these aeolian dunefields to alterations in river flow is especially difficult given the highly correlated nature of the interacting geomorphic and sediment transport processes that drive their formation and maintenance. We characterize the effects of controlled river floods on changes in sediment connectivity at source-bordering aeolian dunefields in the Grand Canyon, USA. Controlled floods from the Glen Canyon Dam are used to build sandbars along the Colorado River in Grand Canyon which provide the main sediment source for aeolian dunefields. Aeolian dunefields are a primary resource of concern for land managers in the Grand Canyon because they often contain buried archaeological features. To characterize dunefield response to controlled floods, we use a novel, automated approach for the mechanistic segregation of geomorphic change to discern the geomorphic processes responsible for driving topographic change in very high resolution digital elevation models-of-difference (DODs) that span multiple, consecutive controlled river floods at source-bordering dunefields. We subsequently compare the results of mechanistic segregation with modelled estimates of aeolian dunefield evolution in order to understand how dunefields respond to contemporary, anthropogenically-driven variability in sediment supply and connectivity. These methods provide a rapid technique for sediment budgeting and enable the inference of spatial and temporal patterns in sediment flux between the fluvial and aeolian domains. We anticipate that this approach will be adaptable to other river valleys where the interactions of aeolian, fluvial, and hillslope processes drive sediment connectivity for the maintenance of source-bordering aeolian dunefields.

Variability in source sediment contributions by applying different statistic test for a Pyrenean catchment.

PubMed

Palazón, L; Navas, A

2017-06-01

Information on sediment contribution and transport dynamics from the contributing catchments is needed to develop management plans to tackle environmental problems related with effects of fine sediment as reservoir siltation. In this respect, the fingerprinting technique is an indirect technique known to be valuable and effective for sediment source identification in river catchments. Large variability in sediment delivery was found in previous studies in the Barasona catchment (1509 km 2 , Central Spanish Pyrenees). Simulation results with SWAT and fingerprinting approaches identified badlands and agricultural uses as the main contributors to sediment supply in the reservoir. In this study the <63 μm sediment fraction from the surface reservoir sediments (2 cm) are investigated following the fingerprinting procedure to assess how the use of different statistical procedures affects the amounts of source contributions. Three optimum composite fingerprints were selected to discriminate between source contributions based in land uses/land covers from the same dataset by the application of (1) discriminant function analysis; and its combination (as second step) with (2) Kruskal-Wallis H-test and (3) principal components analysis. Source contribution results were different between assessed options with the greatest differences observed for option using #3, including the two step process: principal components analysis and discriminant function analysis. The characteristics of the solutions by the applied mixing model and the conceptual understanding of the catchment showed that the most reliable solution was achieved using #2, the two step process of Kruskal-Wallis H-test and discriminant function analysis. The assessment showed the importance of the statistical procedure used to define the optimum composite fingerprint for sediment fingerprinting applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Understanding Stream Channel Sediment Source Contributions For The Paradise Creek Watershed In Northern Idaho

NASA Astrophysics Data System (ADS)

Rittenburg, R.; Boll, J.; Brooks, E. S.

2013-12-01

Excess sediment from agricultural areas has been a major source of impairment for water bodies, resulting in the implementation of mitigation measures across landscapes. Watershed scale reductions often target upland erosion as key non-point sources for sediment loading. Stream channel dynamics, however, also play a contributing role in sediment loading in the form of legacy sediments, channel erosion and deposition, and buffering during storm events. In-stream contributions are not well understood, and are a potentially important consideration for Total Maximum Daily Loads (TMDLs). The objective of this study is to differentiate stream bank and stream bed sediment contributions and better understand the role of legacy sediments. The study area is the Paradise Creek Watershed in northern Idaho. We modeled sediment yield to the channel system using the Water Erosion Prediction Project (WEPP) model, and subsequent channel erosion and deposition using CONCEPTs. Field observations of cross-sections along the channel system over a 5-year period were collected to verify model simulations and to test the hypothesis that the watershed load was composed predominantly of legacy sediments. Our modeling study shows that stream channels contributed to 39% of the total annual sediment load for the basin, with a 19-year time lag between sediments entering the stream to leaving the watershed outlet. Observations from long-term cross sectional data in the watershed, and a sediment fingerprinting analysis will be presented to better understand sediment contributions from within the stream channel system.

Role of organic phosphorus in sediment in a shallow eutrophic lake

NASA Astrophysics Data System (ADS)

Shinohara, Ryuichiro; Hiroki, Mikiya; Kohzu, Ayato; Imai, Akio; Inoue, Tetsunori; Furusato, Eiichi; Komatsu, Kazuhiro; Satou, Takayuki; Tomioka, Noriko; Shimotori, Koichi; Miura, Shingo

2017-08-01

We tested the hypothesis that mineralization of molybdenum unreactive phosphorus (MUP) in pore water is the major pathway for the changes in the concentration of molybdenum-reactive P (MRP) in pore water and inorganic P in sediment particles. The concentration of inorganic P in the sediment particles increased from December to April in Lake Kasumigaura, whereas concentrations of organic P in the sediment particles and MUP in pore water decreased. These results suggest that MUP mineralization plays a key role as the source of MRP, whereas desorption of inorganic P from the sediment particles into the pore water is a minor process. One-dimensional numerical simulation of sediment particles and the pore water supported the hypothesis. Diffusive flux of MUP was small in pore water, even in near-surface layers, so mineralization was the dominant process for changing the MUP concentration in the pore water. For MRP, diffusion was the dominant process in the surface layer, whereas adsorption onto the sediment was the dominant process in deeper layers. Researchers usually ignore organic P in the sediment, but organic P in sediment particles and the pore water is a key source of inorganic P in the sediment particles and pore water; our results suggest that in Lake Kasumigaura, organic P in the sediment is an important source, even at depths more than 1 cm below the sediment surface. In contrast, the large molecular size of MUP in pore water hampers diffusion of MUP from the sediment into the overlying water.

Quantifying the origin of different sediment types in a catchment of the Southern French Alps by combining hydro-sedimentary records and fingerprinting

NASA Astrophysics Data System (ADS)

Evrard, Olivier; Navratil, Oldrich; Ayrault, Sophie; Esteves, Michel; Legout, Cédric; Némery, Julien; Lefèvre, Irène; Bonté, Philippe

2013-04-01

Soil erosion and subsequent sediment supply to rivers are particularly massive and episodic in mountainous environments, such as in the Southern French Alps. Those processes typically lead to an increase in water turbidity and a rapid filling of reservoirs in downstream areas. This situation is particularly problematic in regions where reservoirs are used to provide clear water to hydroelectric power plants. Sediment source areas must first be delineated and sediment fluxes between hillslopes and the river system must be better understood to implement efficient sediment management. We therefore combined traditional monitoring techniques (i.e., installation of river gauges and sediment samplers in several subcatchments) and sediment fingerprinting using elemental geochemistry and fallout radionuclides as potential discriminant properties to quantify the supply of sediment provided by different lithological sources (i.e., black marls, marly limestones, conglomerates, Quaternary deposits) to the River Bléone (905 km²). Those analyses were conducted on different material types collected within the catchment (i.e. suspended and riverbed sediment), and at the catchment outlet (i.e. on a sequence of sections of a 3-m long sediment core). Sediment exports at the river catchment outlet (330±100 t km-2 yr-1) were mainly driven (80%) by the occurrence of widespread rainfall events (long duration, low intensities). In contrast, heavy, local and short duration storms generated high peak discharges and suspended sediment concentrations, but they were restricted to small upstream torrents. Our study (2007-2009) confirmed the important contribution of black marls (up to 70% at the flood scale) to sediment transported in rivers, although this substrate only occupies c. 10% of the total catchment surface. However, the contribution of other lithological sources varied at both intra- and inter-flood scales. Sediment exports generated by local convective storms were dominated by black marls/marly limestones. In contrast, widespread flood events that generate the bulk of annual sediment supply at the outlet were characterized by a more stable lithologic composition and by a larger contribution of limestones, Quaternary deposits and conglomerates, which corroborated the analysis of riverbed sediment. Finally, we found that black marls and marly limestone sources provided the main fraction of sediment analysed throughout the outlet core sequence (40 and 22 %, respectively, for the period 1962-2009). However, we also found evidence for the occurrence of major floods carrying large quantities of sediment originating from Quaternary deposits and conglomerates (25 and 16 %, respectively). The variability of sediment sources throughout the sequence may reflect the spatial variability of rainfall within the catchment, which in turn reflects its origin. This study emphasizes the importance of using archival data to validate the results of sediment fingerprinting studies conducted during short contemporary monitoring programmes.

Large shift in source of fine sediment in the upper Mississippi River

USGS Publications Warehouse

Belmont, P.; Gran, K.B.; Schottler, S.P.; Wilcock, P.R.; Day, S.S.; Jennings, C.; Lauer, J.W.; Viparelli, E.; Willenbring, J.K.; Engstrom, D.R.; Parker, G.

2011-01-01

Although sediment is a natural constituent of rivers, excess loading to rivers and streams is a leading cause of impairment and biodiversity loss. Remedial actions require identification of the sources and mechanisms of sediment supply. This task is complicated by the scale and complexity of large watersheds as well as changes in climate and land use that alter the drivers of sediment supply. Previous studies in Lake Pepin, a natural lake on the Mississippi River, indicate that sediment supply to the lake has increased 10-fold over the past 150 years. Herein we combine geochemical fingerprinting and a suite of geomorphic change detection techniques with a sediment mass balance for a tributary watershed to demonstrate that, although the sediment loading remains very large, the dominant source of sediment has shifted from agricultural soil erosion to accelerated erosion of stream banks and bluffs, driven by increased river discharge. Such hydrologic amplification of natural erosion processes calls for a new approach to watershed sediment modeling that explicitly accounts for channel and floodplain dynamics that amplify or dampen landscape processes. Further, this finding illustrates a new challenge in remediating nonpoint sediment pollution and indicates that management efforts must expand from soil erosion to factors contributing to increased water runoff. ?? 2011 American Chemical Society.

Application of geoaccumulation index and enrichment factors on the assessment of heavy metal pollution in the sediments.

PubMed

Shafie, Nur Aliaa; Aris, Ahmad Zaharin; Zakaria, Mohamad Pauzi; Haris, Hazzeman; Lim, Wan Ying; Isa, Noorain Mohd

2013-01-01

An investigative study was carried out in Langat River to determine the heavy metal pollution in the sediment with 22 sampling stations selected for the collection of sediment samples. The sediment samples were digested and analyzed for extractable metal ((48)Cd, (29)Cu, (30)Zn, (33)As, (82)Pb) using the Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Parameters, such as pH, Eh, electrical conductivity (EC), salinity, cation exchange capacity (CEC) and loss on ignition (LOI) were also determined. The assessment of heavy metal pollution was derived using the enrichment factors (EF) and geoaccumulation index (I(geo)). This study revealed that the sediment is predominantly by As > Cd > Pb > Zn > Cu. As recorded the highest EF value at 187.45 followed by Cd (100.59), Pb (20.32), Zn (12.42) and Cu (3.46). This is similar to the I(geo), which indicates that the highest level goes to As (2.2), exhibits moderately polluted. Meanwhile, Cd recorded 1.8 and Pb (0.23), which illustrates that both of these elements vary from unpolluted to moderately polluted. The Cu and Zn levels are below 0, which demonstrates background concentrations. The findings are expected to update the current status of the heavy metal pollution as well as creating awareness concerning the security of the river water as a drinking water source.

Multi-isotopic determination of plutonium (239Pu, 240Pu, 241Pu and 242Pu) in marine sediments using sector-field inductively coupled plasma mass spectrometry.

PubMed

Donard, O F X; Bruneau, F; Moldovan, M; Garraud, H; Epov, V N; Boust, D

2007-03-28

Among the transuranic elements present in the environment, plutonium isotopes are mainly attached to particles, and therefore they present a great interest for the study and modelling of particle transport in the marine environment. Except in the close vicinity of industrial sources, plutonium concentration in marine sediments is very low (from 10(-4) ng kg(-1) for (241)Pu to 10 ng kg(-1) for (239)Pu), and therefore the measurement of (238)Pu, (239)Pu, (240)Pu, (241)Pu and (242)Pu in sediments at such concentration level requires the use of very sensitive techniques. Moreover, sediment matrix contains huge amounts of mineral species, uranium and organic substances that must be removed before the determination of plutonium isotopes. Hence, an efficient sample preparation step is necessary prior to analysis. Within this work, a chemical procedure for the extraction, purification and pre-concentration of plutonium from marine sediments prior to sector-field inductively coupled plasma mass spectrometry (SF-ICP-MS) analysis has been optimized. The analytical method developed yields a pre-concentrated solution of plutonium from which (238)U and (241)Am have been removed, and which is suitable for the direct and simultaneous measurement of (239)Pu, (240)Pu, (241)Pu and (242)Pu by SF-ICP-MS.

The clay mineral and Sr-Nd isotopic composition for fine-grained fraction of sediments from northwestern South China Sea: implications for sediment provenance

NASA Astrophysics Data System (ADS)

Cai, G.

2013-12-01

*Guanqiang Cai caiguanqiang@sina.com Guangzhou Marine Geological Survey, Guangzhou, 510760, P.R. China As the largest marginal sea in the western pacific, the South China Sea (SCS) receives large amount of terrigenous material annually through numerous rivers from surrounding continents and islands, which make it as the good place for the study of source to sink process. Yet few studies put emphasis on the northwestern continental shelf and slope in the SCS, even though most of the detrital materials derived from the Red River and Hainan Island are deposited in this area, and northwestern shelf plays a significant role in directly linking the South China, the Indochina and the South China Sea and thus controlling the source to sink process of terrestrial sediment. We presented the clay mineral and Sr-Nd isotopic composition of fine-grained fraction for sediments from northwestern SCS, in order to identify sediment source and transportation. The results show that the clay mineral of northwestern SCS sediments are mainly illite (30%~59%), smectite (20%~40%) and kaolinite (8%~35%), with minor chlorite. The illite chemical index varies between 0.19 and 0.75 with an average of 0.49, indicating an intensive hydrolysis in the source region. The 87Sr/86Sr ratios of sediments range from 0.716288 to 0.734416 (average of 0.724659), and ɛ Nd(0) values range from -10.31 to -11.62 (average of -10.93), which suggest that the source rocks of these sediments are derived from continental crust. The Hainan Island is an important source for sediments deposited in the nearshore and western shelf, especially for illite, kaolinite and smectite clay minerals. Furthermore, the relatively high contents of kaolinite and smectite in sediments from eastern shelf and southern slope of Hainan Island are also controlled by the supply of terrigenous materials from Hainan, which cannot be resulted from sedimentary differentiation of the Pearl and Red river sediments. And the correlation analysis between smectite and Sr-Nd isotopic ratios imply that the smectite in sediments mainly come from chemical weathering products of old continental crust, rather than volcanic rocks of Luzon island.

Source determination of benzotriazoles in sediment cores from two urban estuaries on the Atlantic Coast of the United States

EPA Science Inventory

Benzotriazoles (BZTs) are used in a broad range of commercial and industrial products, particularly as metal corrosion inhibitors and as ultraviolet (UV) light stabilizer additives in plastics and polymers. Their long-term usage and high production volumes have resulted in the r...

Geomorphic evolution of the Le Sueur River, Minnesota, USA, and implications for current sediment loading

USGS Publications Warehouse

Gran, K.B.; Belmont, P.; Day, S.S.; Jennings, C.; Johnson, Aaron H.; Perg, L.; Wilcock, P.R.

2009-01-01

There is clear evidence that the Minnesota River is the major sediment source for Lake Pepin and that the Le Sueur River is a major source to the Minnesota River. Turbidity levels are high enough to require management actions. We take advantage of the well-constrained Holocene history of the Le Sueur basin and use a combination of remote sensing, fi eld, and stream gauge observations to constrain the contributions of different sediment sources to the Le Sueur River. Understanding the type, location, and magnitude of sediment sources is essential for unraveling the Holocene development of the basin as well as for guiding management decisions about investments to reduce sediment loads. Rapid base-level fall at the outlet of the Le Sueur River 11,500 yr B.P. triggered up to 70 m of channel incision at the mouth. Slope-area analyses of river longitudinal profi les show that knickpoints have migrated 30-35 km upstream on all three major branches of the river, eroding 1.2-2.6 ?? 109 Mg of sediment from the lower valleys in the process. The knick zones separate the basin into an upper watershed, receiving sediment primarily from uplands and streambanks, and a lower, incised zone, which receives additional sediment from high bluffs and ravines. Stream gauges installed above and below knick zones show dramatic increases in sediment loading above that expected from increases in drainage area, indicating substantial inputs from bluffs and ravines.

Polycyclic Aromatic Hydrocarbons in Coastal Sediment of Klang Strait, Malaysia: Distribution Pattern, Risk Assessment and Sources

PubMed Central

Tavakoly Sany, Seyedeh Belin; Hashim, Rosli; Salleh, Aishah; Rezayi, Majid; Mehdinia, Ali; Safari, Omid

2014-01-01

Concentration, source, and ecological risk of polycyclic aromatic hydrocarbons (PAHs) were investigated in 22 stations from surface sediments in the areas of anthropogenic pollution in the Klang Strait (Malaysia). The total PAH level in the Klang Strait sediment was 994.02±918.1 µg/kg dw. The highest concentration was observed in stations near the coastline and mouth of the Klang River. These locations were dominated by high molecular weight PAHs. The results showed both pyrogenic and petrogenic sources are main sources of PAHs. Further analyses indicated that PAHs primarily originated from pyrogenic sources (coal combustion and vehicular emissions), with significant contribution from petroleum inputs. Regarding ecological risk estimation, only station 13 was moderately polluted, the rest of the stations suffered rare or slight adverse biological effects with PAH exposure in surface sediment, suggesting that PAHs are not considered as contaminants of concern in the Klang Strait. PMID:24747349

Runoff of particle bound pollutants from urban impervious surfaces studied by analysis of sediments from stormwater traps.

PubMed

Jartun, Morten; Ottesen, Rolf Tore; Steinnes, Eiliv; Volden, Tore

2008-06-25

Runoff sediments from 68 small stormwater traps around the harbor of urban Bergen, Norway, were sampled and the concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), heavy metals, and total organic carbon (TOC) were determined in addition to grain size. Our study provides empirical data from a large area in the interface between the urban and marine environment, studying the active transport of pollutants from land-based sources. The results of the analyses clearly demonstrate the importance of the urban environment representing a variety of contamination sources, and that stormwater runoff is an important dispersion mechanism of toxic pollutants. The concentrations of different pollutants in urban runoff sediments show that there are several active pollution sources supplying the sewage systems with PCBs, PAHs and heavy metals such as lead (Pb), zinc (Zn) and cadmium (Cd). The concentration of PCB7 in the urban runoff sediments ranged between < 0.0004 and 0.704 mg/kg. For PAH16, the concentration range was < 0.2-80 mg/kg, whereas the concentration ranges of Pb, Zn and Cd were 9-675, 51.3-4670 and 0.02-11.1 mg/kg respectively. Grain size distribution in 21 selected samples varied from a median particle diameter of 13 to 646 microm. However, several samples had very fine-grained particles even up to the 90 percentile of the samples, making them available for stormwater dispersion in suspended form. The sampling approach proposed in this paper will provide environmental authorities with a useful tool to examine ongoing urban contamination of harbors and similar recipients.

Contamination characteristics, ecological risk and source identification of trace metals in sediments of the Le'an River (China).

PubMed

Chen, Haiyang; Chen, Ruihui; Teng, Yanguo; Wu, Jin

2016-03-01

Recognizing the pollution characteristics of trace metals in river sediments and targeting their potential sources are of key importance for proposing effective strategies to protect watershed ecosystem health. In this study, a comprehensive investigation was conducted to identify the contamination and risk characteristics of trace metals in sediments of Le'an River which is a main tributary of the largest freshwater lake in China, Poyang Lake. To attain this objective, several tools and models were considered. Geoaccumulation index and enrichment factor were used to understand the general pollution characteristic of trace metals in sediments. Discriminant analysis was applied to identify the spatial variability of sediment metals. Sediment quality guidelines and potential ecological risk index were employed for ecological risk evaluation. Multivariate curve resolution-alternating least square was proposed to extract potential pollution sources, as well as the application of Monte-Carlo simulation for uncertainty analysis of source identification. Results suggested that the sediments in Le'an River were considerably polluted by the investigated trace metals (Cd, Cr, As, Hg, Pb, Cu, Zn and Ni). Sediment concentrations of these metals showed significant spatial variations. The potential ecological risk lay in high level. Comparatively speaking, the metals of Cd, Cu and Hg were likely to result in more harmful effects. Mining activities and the application of fertilizers and agrochemicals were identified as the main anthropogenic sources. To protect the ecological system of Le'an River and Poyang Lake watershed, industrial mining and agricultural activities in this area should to be strictly regulated. Copyright © 2015 Elsevier Inc. All rights reserved.

Mercury sedimentation in lakes in western Whatcom County, Washington, USA and its relation to local industrial and municipal atmospheric sources

USGS Publications Warehouse

Paulson, A.J.; Norton, D.

2008-01-01

Concentrations of mercury (Hg) were measured in six dated cores from four lakes in western Whatcom County, Washington, USA, that were at various bearings from a chlor-alkali plant, two municipal waste incinerators and a municipal sewage sludge incinerator. The importance of atmospheric emissions of Hg from these local municipal and industrial sources was evaluating by comparing the temporal trends in sedimentation of the lake cores with the emission history of each Hg species and by examining the geographical distribution of Hg sedimentation in relation to the region's primary wind pattern. Local municipal and industrial sources of atmospheric Hg were not responsible for the majority of the Hg in the upper layer of sediments of Whatcom County lakes because of (1) the significant enrichment of Hg in lake sediments prior to emissions of local industrial and municipal sources in 1964, (2) smaller increases in Hg concentrations occurred after 1964, (3) the similarity of maximum enrichments found in Whatcom County lakes to those in rural lakes around the world, (4) the inconsistency of the temporal trends in Hg sedimentation with the local emission history, and (5) the inconsistency of the geographic trends in Hg sedimentation with estimated deposition. Maximum enrichment ratios of Hg in lake sediments between 2 and 3 that are similar to rural areas in Alaska, Minnesota, and New England suggest that global sources of Hg were primarily responsible for increases of Hg in Whatcom County lakes beginning about 1900. ?? 2007 GovernmentEmployee: U.S. Government, Department of Interior, U.S. Geological Survey.

Field Observations of Hydrodynamics, Sediment Transport, and Water and Sediment Quality in the Hudson-Raritan Estuary

NASA Astrophysics Data System (ADS)

Bruno, M. S.; Glenn, S.; Chant, R.; Rankin, K.; Korfiatis, G.; Dimou, N.; Creed, E.; Fullerton, B.; Pence, A.; Burke, P.; Haldeman, C.; Hires, R.; Hunter, E.

2002-12-01

The New York-New Jersey Harbor estuary system is of enormous ecological and economic importance to the region. The presence of toxic chemicals in the water and sediments results in reduced water quality, fisheries restrictions/advisories, and general adverse impacts to the estuarine ecosystem. The Port of New York and New Jersey is central to the economy of the region. However, in recent years, problems associated with the management of contaminated dredged material, including high costs and the lack of suitable disposal/use alternatives, have threatened to impact the volume of shipping in the Harbor. Sources of contaminants include atmospheric deposition, municipal and industrial wastewater treatment facilities, combined sewer and stormwater outfalls, and rainfall-induced runoff (non-point sources). In addition, Harbor sediments can act as a continuing source as they are re-suspended and moved throughout the system by both natural and man-made means. As part of the New Jersey Toxics Reduction Workplan, Stevens Institute of Technology and Rutgers University are conducting hydrodynamic, sediment transport, and water and suspended sediment quality measurements in Newark Bay, the Arthur Kill and the Kill van Kull. The goals of the project include: (1) collection of high resolution (event-driven and long-term) hydrodynamic, sediment transport and water and suspended sediment quality measurements for use in the assessment of the dominant physics of the system and in the development of a combined hydrodynamic-sediment transport-water/sediment quality model for the region. (2) identification of those tributaries to NY-NJ Harbor that are significant sources of the chemicals of concern, and evaluation of the importance of non-point sources and existing contaminated bottom sediments as sources of the chemicals of concern. (3) identification of point discharges that represent significant sources of the chemicals of concern. Observations were obtained over a two-year period, during 21 tributary flow "events", each having an approximate duration of 1 week. The measurement program included 3 fixed mooring stations and 5 shipboard locations. Each mooring consisted of an acoustic Doppler current profiler; a high-resolution pressure sensor; an OBS; a CTD; and a laser-based scatterometer. The ship-board measurements included vertical current profiles using a towed acoustic Doppler current profiler; CTD measurements; OBS measurements; suspended sediment concentration and particle size spectrum using a laser-based scatterometer; and chemical characterization of water and suspended sediment samples. The water and sediment quality measurements were obtained using a specially designed Trace Organics Platform Sampler. This sampler allowed for the measurement of low-level concentrations of PCBs (108 congeners), dioxins/furans, Pesticides, PAHs and metals (Hg, Cd, Pb). Preliminary analysis of the data has improved our understanding of the circulation and sediment transport patterns in this region of the estuary, including the influence of extreme tributary flow events, local winds, and anthropogenic effects such as port structures, vessels, and the navigation channels, and has identified the most highly contaminated reaches of the tributaries.

Long-term fertilization alters the relative importance of nitrate reduction pathways in salt marsh sediments

NASA Astrophysics Data System (ADS)

Peng, Xuefeng; Ji, Qixing; Angell, John H.; Kearns, Patrick J.; Yang, Hannah J.; Bowen, Jennifer L.; Ward, Bess B.

2016-08-01

Salt marshes provide numerous valuable ecological services. In particular, nitrogen (N) removal in salt marsh sediments alleviates N loading to the coastal ocean. N removal reduces the threat of eutrophication caused by increased N inputs from anthropogenic sources. It is unclear, however, whether chronic nutrient overenrichment alters the capacity of salt marshes to remove anthropogenic N. To assess the effect of nutrient enrichment on N cycling in salt marsh sediments, we examined important N cycle pathways in experimental fertilization plots in a New England salt marsh. We determined rates of nitrification, denitrification, and dissimilatory nitrate reduction to ammonium (DNRA) using sediment slurry incubations with 15N labeled ammonium or nitrate tracers under oxic headspace (20% oxygen/80% helium). Nitrification and denitrification rates were more than tenfold higher in fertilized plots compared to control plots. By contrast, DNRA, which retains N in the system, was high in control plots but not detected in fertilized plots. The relative contribution of DNRA to total nitrate reduction largely depends on the carbon/nitrate ratio in the sediment. These results suggest that long-term fertilization shifts N cycling in salt marsh sediments from predominantly retention to removal.

Sources of fine-grained sediment in the Linganore Creek watershed, Frederick and Carroll Counties, Maryland, 2008-10

USGS Publications Warehouse

Gellis, Allen C.; Noe, Gregory B.; Clune, John W.; Myers, Michael K.; Hupp, Cliff R.; Schenk, Edward R.; Schwarz, Gregory E.

2015-01-01

Management implications of this study indicate that both agriculture and streambanks are important sources of sediment in Linganore Creek where the delivery of agriculture sediment was 4 percent and the delivery of streambank sediment was 44 percent. Fourth order streambanks, on average, had the highest rates of bank erosion. Combining the sediment fingerprinting and sediment budget results indicates that 96 percent of the eroded fine-grained sediment from agriculture went into storage. Flood plains and ponds are effective storage sites of sediment in the Linganore Creek watershed. Flood plains stored 8 percent of all eroded sediment with 4th and 5th order flood plains, on average, storing the most sediment. Small ponds in the Linganore Creek watershed, which drained 16 percent of the total watershed area, stored 15 percent of all eroded sediment. Channel beds were relatively stable with the greatest erosion generally occurring in 4th and 5th order streams.

Alternative assessment of nano-TiO2 sedimentation under different conditions based on sedimentation efficiency at quasi-stable state

NASA Astrophysics Data System (ADS)

He, Guang'an; Chen, Rui; Lu, Shushen; Jiang, Chengchun; Liu, Hong; Wang, Chuan

2015-11-01

The predictable significant increase in manufacture and use of engineered nanoparticles (ENPs) will cause their inevitable release into environment, and the potential harmful effects of ENPs have been confirmed. As representative ENPs, sedimentation behavior of nano-titanium dioxide (n-TiO2) should be better understood to control its environmental risk. In this study, an experimental methodology was established to set the sampling area and sampling time of n-TiO2 sedimentation. In addition, we defined a quasi-stable state and a precise index, i.e., sedimentation efficiency (SE) at this state, to describe the n-TiO2 sedimentation behavior. Both alternative concentration determination and conventional size measurement were applied to evaluate the sedimentation behavior of n-TiO2 with fulvic acid. Results showed that the sedimentation behavior described by SE was more precise and in disagreement with those predicted by particle size. Moreover, sedimentation experiments with salicylic acid (SA), under an electric field and different water temperatures or with sulfosalicylic acid under light irradiation were also performed. When the total organic carbon concentration of SA, the voltage of working electrodes, and water temperature increased, or the wavelength of light source decreased, the SE of n-TiO2 increased and n-TiO2 showed a tendency to settle in water. These findings might be important for deepening the understanding of n-TiO2 environmental behavior and exploring sedimentation behavior of other ENPs.

The Origin of Salt-Encased Sediment Packages: Observations from the SE Precaspian Basin (Kazakhstan)

NASA Astrophysics Data System (ADS)

Fernandez, Naiara; Duffy, Oliver B.; Hudec, Michael R.; Jackson, Martin P. A.; Burg, George; Jackson, Christopher A.-L.; Dooley, Tim P.

2017-04-01

Intrasalt sediment packages containing siliciclastic sediments, carbonate sediments, or non-halite evaporites such as gypsum or anhydrite are common within most salt sequences. Intrasalt sediment packages may have been deposited before, during, or after salt deposition and be incorporated into the salt by various processes. Understanding the origin and evolution of intrasalt sediment packages may yield important insights into the tectonic and geodynamic history of the basin, and also into the understanding of salt tectonics. Despite the importance of intrasalt sediment packages, currently there is no systematic description of their possible origins and their distinguishing criteria. This work is divided in three parts. First, we outline the possible origins of intrasalt sediment packages, as well as criteria to determine if they originated as subsalt, suprasalt or intrasalt sequences. Second, we examine how sediment packages that originated on top of salt, such as minibasins, can be encased within salt. We propose four key processes by which salt can be expelled and emplaced above minibasins to encase them: a) salt expulsion from beneath a minibasin experiencing density-driven subsidence; b) salt expulsion from beneath adjacent subsiding minibasins; c) salt expulsion associated with lateral shortening; d) override of minibasins by a salt sheet sourced from elsewhere. Third, we present a case study from the SE Precaspian Basin, Kazakhstan, where, using a borehole-constrained 3D seismic reflection dataset, the proposed criteria are applied to an area with abundant, newly discovered sediment packages within salt.

Polycyclic aromatic hydrocarbons (PAHs) in the water column and sediment core of Deep Bay, South China

NASA Astrophysics Data System (ADS)

Qiu, Yao-Wen; Zhang, Gan; Liu, Guo-Qing; Guo, Ling-Li; Li, Xiang-Dong; Wai, Onyx

2009-06-01

The levels of 15 polycyclic aromatic hydrocarbons (PAHs) were determined in seawater, suspended particulate matter (SPM), surface sediment and core sediment samples of Deep Bay, South China. The average concentrations Σ 15PAHs were 69.4 ± 24.7 ng l -1 in seawater, 429.1 ± 231.8 ng g -1 in SPM, and 353.8 ± 128.1 ng g -1 dry weight in surface sediment, respectively. Higher PAH concentrations were observed in SPM than in surface sediment. Temporal trend of PAH concentrations in core sediment generally increased from 1948 to 2004, with higher concentrations in top than in sub-surface, implying a stronger recent input of PAHs owing to the rapid economic development in Shenzhen. Compared with historical data, the PAH levels in surface sediment has increased, and this was further confirmed by the increasing trend of PAHs in the core sediment. Phenanthrene, fluoranthene and pyrene dominated in the PAH composition pattern profiles in the Bay. Compositional pattern analysis suggested that PAHs in the Deep Bay were derived from both pyrogenic and petrogenic sources, and diesel oil leakage, river runoff and air deposition may serve as important pathways for PAHs input to the Bay. Significant positive correlations between partition coefficient in surface sediment to that in water ( KOC) of PAH and their octanol/water partition coefficients ( KOW) were observed, suggesting that KOC of PAHs in sediment/water of Deep Bay may be predicted by the corresponding KOW.

Sediment delivery to the Gulf of Alaska: source mechanisms along a glaciated transform margin

USGS Publications Warehouse

Dobson, M.R.; O'Leary, D.; Veart, M.

1998-01-01

Sediment delivery to the Gulf of Alaska occurs via four areally extensive deep-water fans, sourced from grounded tidewater glaciers. During periods of climatic cooling, glaciers cross a narrow shelf and discharge sediment down the continental slope. Because the coastal terrain is dominated by fjords and a narrow, high-relief Pacific watershed, deposition is dominated by channellized point-source fan accumulations, the volumes of which are primarily a function of climate. The sediment distribution is modified by a long-term tectonic translation of the Pacific plate to the north along the transform margin. As a result, the deep-water fans are gradually moved away from the climatically controlled point sources. Sets of abandoned channels record the effect of translation during the Plio-Pleistocene.

Phosphorus fractionation in sediment cores collected in 2005 before and after onset of an Aphanizomenon flos-aquae bloom in upper Klamath Lake, OR, USA

USGS Publications Warehouse

Simon, N.S.; Lynch, D.; Gallaher, T.N.

2009-01-01

We tested the hypothesis that there would be measurable losses of phosphorus (P) from surficial sediments of Upper Klamath Lake (UKL), Oregon, if sediments were a source of P during an algal bloom. We compared concentrations of total and forms of P at various depths in cores collected before and after the onset of a large Aphanizomenon flos-aquae bloom. Concentrations of inorganic P were determined in extraction solutions of MgCl2 (1 M, pH 8), citrate-dithionite-bicarbonate, and 1 M HCl. Sediments below 2 cm were dominated by residual P which is defined as total P minus inorganic P. During the study period, data from the top 2-cm of sediment indicated (a) significant decrease in total P concentration, primarily associated with iron oxyhydroxides at one site, and (b) significant increase in total P concentration associated with residual P at a second site. Data from two other sites indicated no net changes in concentrations of total P. ?? 2009 US Government.

Assessment of resuspended matter and redistribution of macronutrient elements produced by boat disturbance in a eutrophic lagoon.

PubMed

Lenzi, Mauro; Finoia, Maria Grazia; Gennaro, Paola; Mercatali, Isabel; Persia, Emma; Solari, Jacopo; Porrello, Salvatore

2013-07-15

Harvesting of macroalgae by specially equipped boats in a shallow eutrophic lagoon produces evident sediment resuspension. To outline the environmental effects of this disturbance, we examined the quantity of fall-out and the distances travelled by sediment and macronutrients from the source of boat disturbance. Resuspended sediment fall-out (RSFO) was trapped at different distances from the boat path to determine total dry weight, total nitrogen (TN), total carbon (TC), total organic carbon (TOC), total sulphur (TS) and total phosphorus (TP). The data was analysed by principal components analysis (PCA) and linear discriminant analysis (LDA) on PCA factors. Fall-out of C, N, S and P from the plume of resuspended sediment indicated significant re-arrangement of these nutrients: RSFO dry weight and S content decreased with distance from the boat path, whereas TP increased and was the variable responsible for most discrimination at 100 m. The mass of resuspended matter was relatively large, indicating that the boats considerably reshuffle lagoon sediment. Copyright © 2013 Elsevier Ltd. All rights reserved.

Sediment transport-based metrics of wetland stability

USGS Publications Warehouse

Ganju, Neil K.; Kirwan, Matthew L.; Dickhudt, Patrick J.; Guntenspergen, Glenn R.; Cahoon, Donald R.; Kroeger, Kevin D.

2015-01-01

Despite the importance of sediment availability on wetland stability, vulnerability assessments seldom consider spatiotemporal variability of sediment transport. Models predict that the maximum rate of sea level rise a marsh can survive is proportional to suspended sediment concentration (SSC) and accretion. In contrast, we find that SSC and accretion are higher in an unstable marsh than in an adjacent stable marsh, suggesting that these metrics cannot describe wetland vulnerability. Therefore, we propose the flood/ebb SSC differential and organic-inorganic suspended sediment ratio as better vulnerability metrics. The unstable marsh favors sediment export (18 mg L−1 higher on ebb tides), while the stable marsh imports sediment (12 mg L−1 higher on flood tides). The organic-inorganic SSC ratio is 84% higher in the unstable marsh, and stable isotopes indicate a source consistent with marsh-derived material. These simple metrics scale with sediment fluxes, integrate spatiotemporal variability, and indicate sediment sources.

Contaminated Coastal Sediments in the Northeastern United States: Changing Sources Over Time

NASA Astrophysics Data System (ADS)

Buchholtz ten Brink, M. R.; Bothner, M. H.; Mecray, E. L.

2001-05-01

Regional studies of coastal sediments in the northeastern United States, conducted by the U.S. Geological Survey, show that trace metal contamination from land-based activities has occurred near all major urban centers. Concentrations of metals, such as Cu, Pb, Zn, Hg, and Ag, are 2-5 times background levels in sediments of Boston Harbor, Long Island Sound (LIS), offshore of Gulf of Maine coastal cities, and in the New York Bight (NYB). Contaminant accumulations are strongly influenced by sediment lithology and sediment transport properties in local areas, in addition to proximity to pollutant sources. Inventories are greatest in muddy depo-centers of the NYB, western LIS, and Boston Harbor. Based on sediment cores, the onset of metal contamination in the northeast occurs in the mid-1800s, with inputs increasing in the mid-1900s and decreasing (20-50%) from the 1970s to present. The increases correlate with local population growth and abundance of a bacterial sewage indicator, Clostridium perfringens. Increases of N and Corg in cores also reflect population growth and changing wastewater treatment practices. Corg values reach a high of 6% in buried sediments near the NYB disposal sites. Cores from western LIS have increasing values of C, N, and P in the most recently deposited sediments, in contrast to metal concentrations that have decreased in recent years. Cessation of sludge disposal and reduction of chemical discharges have been effective at reducing inputs; however, contaminated sediment deposits remain in rivers (e.g., the Charles), floodplains (e.g., the Housatonic), and coastal sediments. In the future, high concentrations of metal contaminants stored in buried sediments of marine and fluvial systems are likely to be a lingering and significant source of pollution to coastal environments. Until more effective source-reduction occurs, land-use and industrial practices associated with population growth in the northeast will remain dominant factors for nutrient loading. A multi-disciplinary approach, including predictive models that include changing sources and physical, chemical, and biological transport processes, is required to estimate the long-term fate and effect of pollutants currently in coastal sediments.

Observed salinity changes in the Alappuzha mud bank, southwest coast of India and its implication to hypothesis of mudbank formation

NASA Astrophysics Data System (ADS)

Muraleedharan, K. R.; Dinesh Kumar, P. K.; Prasanna Kumar, S.; Srijith, B.; John, Sebin; Naveen Kumar, K. R.

2017-04-01

Alappuzha mud bank draws special attention among the twenty-mud bank locations reported along the Kerala coast by its remoteness from riverine sources. Among several hypotheses proposed for the formation of mud bank, the subterranean hypothesis was most accepted because of the occurrence of low salinity in the bottom layers. The present study provides evidence to show that occurrence of low salinity waters near the bottom in the mud bank region is an artifact of measuring technique employed for the measurement of salinity. The usual technique of conductivity based salinity determination completely fails in the presence of water laden with high amount of suspended sediment. Laboratory experiments were conducted to determine the response of electrode and conductivity cell sensor types to determine the salinity using a range of suspended sediment in the water column. Actual sediment samples from the mud bank region were utilized for the above studies. Based on field observations and experiments, we conclude that the low salinity was the manifestation of the presence highly turbid fluid mud formation in the mud bank region rather than the influence of fresh water.