Scenario drafting to anticipate future developments in technology assessment

PubMed Central

2012-01-01

Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers. PMID:22894140

Research and Development Project Summaries, October 1991

DTIC Science & Technology

1991-10-01

delivery methods, training cost reduction, demonstration of technology’ effectiveness, and the reduction of acquisition risk . The majority of the work...demonstrations, risk reduction developments, and cost-effectiveness investigations in simulator and training technologzv. This advanced development program is a...systems. The program is organized around specific demonstration tasks that target critical technical risks that confront future weapons system

Is the societal approach wide enough to include relatives? Incorporating relatives' costs and effects in a cost-effectiveness analysis.

PubMed

Davidson, Thomas; Levin, Lars-Ake

2010-01-01

It is important for economic evaluations in healthcare to cover all relevant information. However, many existing evaluations fall short of this goal, as they fail to include all the costs and effects for the relatives of a disabled or sick individual. The objective of this study was to analyse how relatives' costs and effects could be measured, valued and incorporated into a cost-effectiveness analysis. In this article, we discuss the theories underlying cost-effectiveness analyses in the healthcare arena; the general conclusion is that it is hard to find theoretical arguments for excluding relatives' costs and effects if a societal perspective is used. We argue that the cost of informal care should be calculated according to the opportunity cost method. To capture relatives' effects, we construct a new term, the R-QALY weight, which is defined as the effect on relatives' QALY weight of being related to a disabled or sick individual. We examine methods for measuring, valuing and incorporating the R-QALY weights. One suggested method is to estimate R-QALYs and incorporate them together with the patient's QALY in the analysis. However, there is no well established method as yet that can create R-QALY weights. One difficulty with measuring R-QALY weights using existing instruments is that these instruments are rarely focused on relative-related aspects. Even if generic quality-of-life instruments do cover some aspects relevant to relatives and caregivers, they may miss important aspects and potential altruistic preferences. A further development and validation of the existing caregiving instruments used for eliciting utility weights would therefore be beneficial for this area, as would further studies on the use of time trade-off or Standard Gamble methods for valuing R-QALY weights. Another potential method is to use the contingent valuation method to find a monetary value for all the relatives' costs and effects. Because cost-effectiveness analyses are used for decision making, and this is often achieved by comparing different cost-effectiveness ratios, we argue that it is important to find ways of incorporating all relatives' costs and effects into the analysis. This may not be necessary for every analysis of every intervention, but for treatments where relatives' costs and effects are substantial there may be some associated influence on the cost-effectiveness ratio.

A method to assess the potential effects of air pollution mitigation on healthcare costs.

PubMed

Sætterstrøm, Bjørn; Kruse, Marie; Brønnum-Hansen, Henrik; Bønløkke, Jakob Hjort; Flachs, Esben Meulengracht; Sørensen, Jan

2012-01-01

The aim of this study was to develop a method to assess the potential effects of air pollution mitigation on healthcare costs and to apply this method to assess the potential savings related to a reduction in fine particle matter in Denmark. The effects of air pollution on health were used to identify "exposed" individuals (i.e., cases). Coronary heart disease, stroke, chronic obstructive pulmonary disease, and lung cancer were considered to be associated with air pollution. We used propensity score matching, two-part estimation, and Lin's method to estimate healthcare costs. Subsequently, we multiplied the number of saved cases due to mitigation with the healthcare costs to arrive to an expression for healthcare cost savings. The potential cost saving in the healthcare system arising from a modelled reduction in air pollution was estimated at €0.1-2.6 million per 100,000 inhabitants for the four diseases. We have illustrated an application of a method to assess the potential changes in healthcare costs due to a reduction in air pollution. The method relies on a large volume of administrative data and combines a number of established methods for epidemiological analysis.

Mentoring as Professional Development: "Growth for Both" Mentor and Mentee

ERIC Educational Resources Information Center

Hudson, Peter

2013-01-01

Teachers need professional development to keep current with teaching practices, although costs for extensive professional development can be prohibitive across an education system. Mentoring provides one way for embedding cost-effective professional development. This mixed-method study includes surveying mentor teachers ("n" = 101) on a…

[Thin layer agar represents a cost-effective alternative for the rapid diagnosis of multi-drug resistant tuberculosis].

PubMed

Hernández-Sarmiento, José M; Martínez-Negrete, Milton A; Castrillón-Velilla, Diana M; Mejía-Espinosa, Sergio A; Mejía-Mesa, Gloria I; Zapata-Fernández, Elsa M; Rojas-Jiménez, Sara; Marín-Castro, Andrés E; Robledo-Restrepo, Jaime A

2014-01-01

Using cost-benefit analysis for comparing the thin-layer agar culture method to the standard multiple proportion method used in diagnosing multidrug-resistant tuberculosis (MDR TB). A cost-benefit evaluation of two diagnostic tests was made at the Corporación para Investigaciones Biológicas (CIB) in Medellín, Colombia. 100 patients were evaluated; 10.8% rifampicin resistance and 14.3% isoniazid resistance were found. A computer-based decision tree model was used for cost-effectiveness analysis (Treeage Pro); the thin-layer agar culture method was most cost-effective, having 100% sensitivity, specificity and predictive values for detecting rifampicin and isoniazid resistance. The multiple proportion method value was calculated as being US$ 71 having an average 49 day report time compared to US$ 18 and 14 days for the thin-layer agar culture method. New technologies have been developed for diagnosing tuberculosis which are apparently faster and more effective; their operating characteristics must be evaluated as must their effectiveness in terms of cost-benefit. The present study established that using thin-layer agar culture was cheaper, equally effective and could provide results more quickly than the traditional method. This implies that a patient could receive MDR TB treatment more quickly.

The Cost of Doing Business: Cost Structure of Electronic Immunization Registries

PubMed Central

Fontanesi, John M; Flesher, Don S; De Guire, Michelle; Lieberthal, Allan; Holcomb, Kathy

2002-01-01

Objective To predict the true cost of developing and maintaining an electronic immunization registry, and to set the framework for developing future cost-effective and cost-benefit analysis. Data Sources/Study Setting Primary data collected at three immunization registries located in California, accounting for 90 percent of all immunization records in registries in the state during the study period. Study Design A parametric cost analysis compared registry development and maintenance expenditures to registry performance requirements. Data Collection/Extraction Methods Data were collected at each registry through interviews, reviews of expenditure records, technical accomplishments development schedules, and immunization coverage rates. Principal Findings The cost of building immunization registries is predictable and independent of the hardware/software combination employed. The effort requires four man-years of technical effort or approximately $250,000 in 1998 dollars. Costs for maintaining a registry were approximately $5,100 per end user per three-year period. Conclusions There is a predictable cost structure for both developing and maintaining immunization registries. The cost structure can be used as a framework for examining the cost-effectiveness and cost-benefits of registries. The greatest factor effecting improvement in coverage rates was ongoing, user-based administrative investment. PMID:12479497

Research on the optimization of quota design in real estate

NASA Astrophysics Data System (ADS)

Sun, Chunling; Ma, Susu; Zhong, Weichao

2017-11-01

Quota design is one of the effective methods of cost control in real estate development project and widely used in the current real estate development project to control the engineering construction cost, but quota design have many deficiencies in design process. For this purpose, this paper put forward a method to achieve investment control of real estate development project, which combine quota design and value engineering(VE) at the stage of design. Specifically, it’s an optimizing for the structure of quota design. At first, determine the design limits by investment estimate value, then using VE to carry on initial allocation of design limits and gain the functional target cost, finally, consider the whole life cycle cost (LCC) and operational problem in practical application to finish complex correction for the functional target cost. The improved process can control the project cost more effectively. It not only can control investment in a certain range, but also make the project realize maximum value within investment.

Who Should Bear the Cost of Convenience? A Cost-effectiveness Analysis Comparing External Beam and Brachytherapy Radiotherapy Techniques for Early Stage Breast Cancer.

PubMed

McGuffin, M; Merino, T; Keller, B; Pignol, J-P

2017-03-01

Standard treatment for early breast cancer includes whole breast irradiation (WBI) after breast-conserving surgery. Recently, accelerated partial breast irradiation (APBI) has been proposed for well-selected patients. A cost and cost-effectiveness analysis was carried out comparing WBI with two APBI techniques. An activity-based costing method was used to determine the treatment cost from a societal perspective of WBI, high dose rate brachytherapy (HDR) and permanent breast seed implants (PBSI). A Markov model comparing the three techniques was developed with downstream costs, utilities and probabilities adapted from the literature. Sensitivity analyses were carried out for a wide range of variables, including treatment costs, patient costs, utilities and probability of developing recurrences. Overall, HDR was the most expensive ($14 400), followed by PBSI ($8700), with WBI proving the least expensive ($6200). The least costly method to the health care system was WBI, whereas PBSI and HDR were less costly for the patient. Under cost-effectiveness analyses, downstream costs added about $10 000 to the total societal cost of the treatment. As the outcomes are very similar between techniques, WBI dominated under cost-effectiveness analyses. WBI was found to be the most cost-effective radiotherapy technique for early breast cancer. However, both APBI techniques were less costly to the patient. Although innovation may increase costs for the health care system it can provide cost savings for the patient in addition to convenience. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Cost model relationships between textile manufacturing processes and design details for transport fuselage elements

NASA Technical Reports Server (NTRS)

Metschan, Stephen L.; Wilden, Kurtis S.; Sharpless, Garrett C.; Andelman, Rich M.

1993-01-01

Textile manufacturing processes offer potential cost and weight advantages over traditional composite materials and processes for transport fuselage elements. In the current study, design cost modeling relationships between textile processes and element design details were developed. Such relationships are expected to help future aircraft designers to make timely decisions on the effect of design details and overall configurations on textile fabrication costs. The fundamental advantage of a design cost model is to insure that the element design is cost effective for the intended process. Trade studies on the effects of processing parameters also help to optimize the manufacturing steps for a particular structural element. Two methods of analyzing design detail/process cost relationships developed for the design cost model were pursued in the current study. The first makes use of existing databases and alternative cost modeling methods (e.g. detailed estimating). The second compares design cost model predictions with data collected during the fabrication of seven foot circumferential frames for ATCAS crown test panels. The process used in this case involves 2D dry braiding and resin transfer molding of curved 'J' cross section frame members having design details characteristic of the baseline ATCAS crown design.

Strategy on energy saving reconstruction of distribution networks based on life cycle cost

NASA Astrophysics Data System (ADS)

Chen, Xiaofei; Qiu, Zejing; Xu, Zhaoyang; Xiao, Chupeng

2017-08-01

Because the actual distribution network reconstruction project funds are often limited, the cost-benefit model and the decision-making method are crucial for distribution network energy saving reconstruction project. From the perspective of life cycle cost (LCC), firstly the research life cycle is determined for the energy saving reconstruction of distribution networks with multi-devices. Then, a new life cycle cost-benefit model for energy-saving reconstruction of distribution network is developed, in which the modification schemes include distribution transformers replacement, lines replacement and reactive power compensation. In the operation loss cost and maintenance cost area, the operation cost model considering the influence of load season characteristics and the maintenance cost segmental model of transformers are proposed. Finally, aiming at the highest energy saving profit per LCC, a decision-making method is developed while considering financial and technical constraints as well. The model and method are applied to a real distribution network reconstruction, and the results prove that the model and method are effective.

An improved set of standards for finding cost for cost-effectiveness analysis.

PubMed

Barnett, Paul G

2009-07-01

Guidelines have helped standardize methods of cost-effectiveness analysis, allowing different interventions to be compared and enhancing the generalizability of study findings. There is agreement that all relevant services be valued from the societal perspective using a long-term time horizon and that more exact methods be used to cost services most affected by the study intervention. Guidelines are not specific enough with respect to costing methods, however. The literature was reviewed to identify the problems associated with the 4 principal methods of cost determination. Microcosting requires direct measurement and is ordinarily reserved to cost novel interventions. Analysts should include nonwage labor cost, person-level and institutional overhead, and the cost of development, set-up activities, supplies, space, and screening. Activity-based cost systems have promise of finding accurate costs of all services provided, but are not widely adopted. Quality must be evaluated and the generalizability of cost estimates to other settings must be considered. Administrative cost estimates, chiefly cost-adjusted charges, are widely used, but the analyst must consider items excluded from the available system. Gross costing methods determine quantity of services used and employ a unit cost. If the intervention will affect the characteristics of a service, the method should not assume that the service is homogeneous. Questions are posed for future reviews of the quality of costing methods. The analyst must avoid inappropriate assumptions, especially those that bias the analysis by exclusion of costs that are affected by the intervention under study.

Evaluation of a predevelopment service delivery intervention: an application to improve clinical handovers

PubMed Central

Yao, Guiqing Lily; Novielli, Nicola; Manaseki-Holland, Semira; Chen, Yen-Fu; van der Klink, Marcel; Barach, Paul; Chilton, Peter J; Lilford, Richard J

2012-01-01

Background We developed a method to estimate the expected cost-effectiveness of a service intervention at the design stage and ‘road-tested’ the method on an intervention to improve patient handover of care between hospital and community. Method The development of a nine-step evaluation framework: 1. Identification of multiple endpoints and arranging them into manageable groups; 2. Estimation of baseline overall and preventable risk; 3. Bayesian elicitation of expected effectiveness of the planned intervention; 4. Assigning utilities to groups of endpoints; 5. Costing the intervention; 6. Estimating health service costs associated with preventable adverse events; 7. Calculating health benefits; 8. Cost-effectiveness calculation; 9. Sensitivity and headroom analysis. Results     Literature review suggested that adverse events follow 19% of patient discharges, and that one-third are preventable by improved handover (ie, 6.3% of all discharges). The intervention to improve handover would reduce the incidence of adverse events by 21% (ie, from 6.3% to 4.7%) according to the elicitation exercise. Potentially preventable adverse events were classified by severity and duration. Utilities were assigned to each category of adverse event. The costs associated with each category of event were obtained from the literature. The unit cost of the intervention was €16.6, which would yield a Quality Adjusted Life Year (QALY) gain per discharge of 0.010. The resulting cost saving was €14.3 per discharge. The intervention is cost-effective at approximately €214 per QALY under the base case, and remains cost-effective while the effectiveness is greater than 1.6%. Conclusions We offer a usable framework to assist in ex ante health economic evaluations of health service interventions. PMID:22976505

Proposal for the Development of a Standardized Protocol for Assessing the Economic Costs of HIV Prevention Interventions

PubMed Central

Pinkerton, Steven D.; Pearson, Cynthia R.; Eachus, Susan R.; Berg, Karina M.; Grimes, Richard M.

2008-01-01

Summary Maximizing our economic investment in HIV prevention requires balancing the costs of candidate interventions against their effects and selecting the most cost-effective interventions for implementation. However, many HIV prevention intervention trials do not collect cost information, and those that do use a variety of cost data collection methods and analysis techniques. Standardized cost data collection procedures, instrumentation, and analysis techniques are needed to facilitate the task of assessing intervention costs and to ensure comparability across intervention trials. This article describes the basic elements of a standardized cost data collection and analysis protocol and outlines a computer-based approach to implementing this protocol. Ultimately, the development of such a protocol would require contributions and “buy-in” from a diverse range of stakeholders, including HIV prevention researchers, cost-effectiveness analysts, community collaborators, public health decision makers, and funding agencies. PMID:18301128

Prioritizing conservation activities using reserve site selection methods and population viability analysis.

PubMed

Newbold, Stephen C; Siikamäki, Juha

2009-10-01

In recent years a large literature on reserve site selection (RSS) has developed at the interface between ecology, operations research, and environmental economics. Reserve site selection models use numerical optimization techniques to select sites for a network of nature reserves for protecting biodiversity. In this paper, we develop a population viability analysis (PVA) model for salmon and incorporate it into an RSS framework for prioritizing conservation activities in upstream watersheds. We use spawner return data for three closely related salmon stocks in the upper Columbia River basin and estimates of the economic costs of watershed protection from NOAA to illustrate the framework. We compare the relative cost-effectiveness of five alternative watershed prioritization methods, based on various combinations of biological and economic information. Prioritization based on biological benefit-economic cost comparisons and accounting for spatial interdependencies among watersheds substantially outperforms other more heuristic methods. When using this best-performing prioritization method, spending 10% of the cost of protecting all upstream watersheds yields 79% of the biological benefits (increase in stock persistence) from protecting all watersheds, compared to between 20% and 64% for the alternative methods. We also find that prioritization based on either costs or benefits alone can lead to severe reductions in cost-effectiveness.

Valuing the effects of hydropower development on watershed ecosystem services: Case studies in the Jiulong River Watershed, Fujian Province, China

NASA Astrophysics Data System (ADS)

Wang, Guihua; Fang, Qinhua; Zhang, Luoping; Chen, Weiqi; Chen, Zhenming; Hong, Huasheng

2010-02-01

Hydropower development brings many negative impacts on watershed ecosystems which are not fully integrated into current decision-making largely because in practice few accept the cost and benefit beyond market. In this paper, a framework was proposed to valuate the effects on watershed ecosystem services caused by hydropower development. Watershed ecosystem services were classified into four categories of provisioning, regulating, cultural and supporting services; then effects on watershed ecosystem services caused by hydropower development were identified to 21 indicators. Thereafter various evaluation techniques including the market value method, opportunity cost approach, project restoration method, travel cost method, and contingent valuation method were determined and the models were developed to valuate these indicators reflecting specific watershed ecosystem services. This approach was applied to three representative hydropower projects (Daguan, Xizaikou and Tiangong) of Jiulong River Watershed in southeast China. It was concluded that for hydropower development: (1) the value ratio of negative impacts to positive benefits ranges from 64.09% to 91.18%, indicating that the negative impacts of hydropower development should be critically studied during its environmental administration process; (2) the biodiversity loss and water quality degradation (together accounting for 80-94%) are the major negative impacts on watershed ecosystem services; (3) the average environmental cost per unit of electricity is up to 0.206 Yuan/kW h, which is about three quarters of its on-grid power tariff; and (4) the current water resource fee accounts for only about 4% of its negative impacts value, therefore a new compensatory method by paying for ecosystem services is necessary for sustainable hydropower development. These findings provide a clear picture of both positive and negative effects of hydropower development for decision-makers in the monetary term, and also provide a basis for further design of environmental instrument such as payment for watershed ecosystem services.

The Cost-Effectiveness of Education Interventions in Poor Countries. Policy Insight, Volume 2, Issue 4

ERIC Educational Resources Information Center

Evans, David K.; Ghosh, Arkadipta

2008-01-01

Poor countries need development programs that are both effective and cost-effective. To assess effectiveness, researchers are increasingly using randomized trials (or quasi-experimental methods that imitate randomized trials), which provide a clear picture of which outcomes are attributable to the program being evaluated. This "Policy Insight"…

Cost effectiveness and efficiency in assistive technology service delivery.

PubMed

Warren, C G

1993-01-01

In order to develop and maintain a viable service delivery program, the realities of cost effectiveness and cost efficiency in providing assistive technology must be addressed. Cost effectiveness relates to value of the outcome compared to the expenditures. Cost efficiency analyzes how a provider uses available resources to supply goods and services. This paper describes how basic business principles of benefit/cost analysis can be used to determine cost effectiveness. In addition, basic accounting principles are used to illustrate methods of evaluating a program's cost efficiency. Service providers are encouraged to measure their own program's effectiveness and efficiency (and potential viability) in light of current trends. This paper is meant to serve as a catalyst for continued dialogue on this topic.

Health economics in drug development: efficient research to inform healthcare funding decisions.

PubMed

Hall, Peter S; McCabe, Christopher; Brown, Julia M; Cameron, David A

2010-10-01

In order to decide whether a new treatment should be used in patients, a robust estimate of efficacy and toxicity is no longer sufficient. As a result of increasing healthcare costs across the globe healthcare payers and providers now seek estimates of cost-effectiveness as well. Most trials currently being designed still only consider the need for prospective efficacy and toxicity data during the development life-cycle of a new intervention. Hence the cost-effectiveness estimates are inevitably less precise than the clinical data on which they are based. Methods based on decision theory are being developed by health economists that can contribute to the design of clinical trials in such a way that they can more effectively lead to better informed drug funding decisions on the basis of cost-effectiveness in addition to clinical outcomes. There is an opportunity to apply these techniques prospectively in the design of future clinical trials. This article describes the problems encountered by those responsible for drug reimbursement decisions as a consequence of the current drug development pathway. The potential for decision theoretic methods to help overcome these problems is introduced and potential obstacles in implementation are highlighted. Copyright © 2010 Elsevier Ltd. All rights reserved.

Development and application of a probabilistic method for wildfire suppression cost modeling

Treesearch

Matthew P. Thompson; Jessica R. Haas; Mark A. Finney; David E. Calkin; Michael S. Hand; Mark J. Browne; Martin Halek; Karen C. Short; Isaac C. Grenfell

2015-01-01

Wildfire activity and escalating suppression costs continue to threaten the financial health of federal land management agencies. In order to minimize and effectively manage the cost of financial risk, agencies need the ability to quantify that risk. A fundamental aim of this research effort, therefore, is to develop a process for generating risk-based metrics for...

Cost accounting helps ensure group practice profitability.

PubMed

Conrad, K A; Nagle, C B; Wunar, R J

1996-11-01

Physician practice managers are faced with the challenge of developing overall practice budgets, identifying strategies for the practice, and negotiating profitable managed care contracts. To accomplish these objectives, they need to understand and manage the costs associated with practice operations. Practices that have used cost accounting methodologies to identify their operational costs in greater detail and have developed methods to effectively manage their costs are likely to be more attractive partners to health plans and better positioned to thrive under managed care.

Cost-Effectiveness Analysis of Diagnostic Options for Pneumocystis Pneumonia (PCP)

PubMed Central

Harris, Julie R.; Marston, Barbara J.; Sangrujee, Nalinee; DuPlessis, Desiree; Park, Benjamin

2011-01-01

Background Diagnosis of Pneumocystis jirovecii pneumonia (PCP) is challenging, particularly in developing countries. Highly sensitive diagnostic methods are costly, while less expensive methods often lack sensitivity or specificity. Cost-effectiveness comparisons of the various diagnostic options have not been presented. Methods and Findings We compared cost-effectiveness, as measured by cost per life-years gained and proportion of patients successfully diagnosed and treated, of 33 PCP diagnostic options, involving combinations of specimen collection methods [oral washes, induced and expectorated sputum, and bronchoalveolar lavage (BAL)] and laboratory diagnostic procedures [various staining procedures or polymerase chain reactions (PCR)], or clinical diagnosis with chest x-ray alone. Our analyses were conducted from the perspective of the government payer among ambulatory, HIV-infected patients with symptoms of pneumonia presenting to HIV clinics and hospitals in South Africa. Costing data were obtained from the National Institutes of Communicable Diseases in South Africa. At 50% disease prevalence, diagnostic procedures involving expectorated sputum with any PCR method, or induced sputum with nested or real-time PCR, were all highly cost-effective, successfully treating 77–90% of patients at $26–51 per life-year gained. Procedures using BAL specimens were significantly more expensive without added benefit, successfully treating 68–90% of patients at costs of $189–232 per life-year gained. A relatively cost-effective diagnostic procedure that did not require PCR was Toluidine Blue O staining of induced sputum ($25 per life-year gained, successfully treating 68% of patients). Diagnosis using chest x-rays alone resulted in successful treatment of 77% of patients, though cost-effectiveness was reduced ($109 per life-year gained) compared with several molecular diagnostic options. Conclusions For diagnosis of PCP, use of PCR technologies, when combined with less-invasive patient specimens such as expectorated or induced sputum, represent more cost-effective options than any diagnostic procedure using BAL, or chest x-ray alone. PMID:21858013

AN APPROACH TO METHODS DEVELOPMENT FOR HUMAN EXPOSURE ASSESSMENT STUDIES

EPA Science Inventory

Human exposure assessment studies require methods that are rapid, cost-effective and have a high sample through-put. The development of analytical methods for exposure studies should be based on specific information for individual studies. Human exposure studies suggest that di...

De novo establishment and cost-effectiveness of Papanicolaou cytology screening services in the Socialist Republic of Vietnam.

PubMed

Suba, E J; Nguyen, C H; Nguyen, B D; Raab, S S

2001-03-01

Cervical carcinoma is the leading cause of cancer-related death among women in the developing world. The absence of cervical screening in Vietnam and other developing countries is due in large part to the perceived expense of implementing Papanicolaou cytology screening services, although, to the authors' knowledge, the cost-effectiveness of establishing such services has never been studied in a developing country. Using decision analytic methods, the authors assessed cost-effectiveness of Pap screening from a societal perspective in Vietnam, the world's 9th most populous developing country (estimated 1999 population, 79 million). Outcomes measured included life expectancy, cervical carcinoma incidence, cost per woman, and cost-effectiveness. Total costs to establish a nationwide 5-year interval Pap screening program in Vietnam will average less than $148,400 annually during the 10-year time period assumed necessary to develop the program and may be considerably lower if only high risk geographic areas are targeted. Maintenance costs will average less than $0.092 annually per woman in the target screening population. Assuming 70% program participation, cervical carcinoma incidence will decrease from 26 in 100,000 to 14.8 in 100,000, and cost-effectiveness will be $725 per discounted life-year. Several assumptions used in this analysis constitute biases against the effectiveness of Pap screening, which in reality may be significantly more cost-effective than reported here. Contrary to widespread belief, Pap screening in developing countries such as Vietnam is extraordinarily inexpensive and appears to be cost-effective. Because prospects are uncertain regarding useful alternatives to the Pap test, the evidence-based argument for establishing conventional Pap screening services in developing countries such as Vietnam is compelling. Population-based conventional Pap screening services have been established de novo in Vietnam and are now operational. Copyright 2001 American Cancer Society.

Costs and cost-effectiveness of HIV community services: quantity and quality of studies published 1986-2011.

PubMed

Beck, Eduard J; Fasawe, Olufunke; Ongpin, Patricia; Ghys, Peter; Avilla, Carlos; De Lay, Paul

2013-06-01

Community services comprise an important part of a country's HIV response. English language cost and cost-effectiveness studies of HIV community services published between 1986 and 2011 were reviewed but only 74 suitable studies were identified, 66% of which were performed in five countries. Mean study scores by continent varied from 42 to 69% of the maximum score, reflecting variation in topics covered and the quality of coverage: 38% of studies covered key and 11% other vulnerable populations - a country's response is most effective and efficient if these populations are identified given they are key to a successful response. Unit costs were estimated using different costing methods and outcomes. Community services will need to routinely collect and analyze information on their use, cost, outcome and impact using standardized costing methods and outcomes. Cost estimates need to be disaggregated into relevant cost items and stratified by severity and existing comorbidities. Expenditure tracking and costing of services are complementary aspects of the health sector 'resource cycle' that feed into a country's investment framework and the development and implementation of national strategic plans.

Applying Costs, Risks and Values Evaluation (CRAVE) methodology to Engineering Support Request (ESR) prioritization

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla N.

1994-01-01

Given limited budget, the problem of prioritization among Engineering Support Requests (ESR's) with varied sizes, shapes, and colors is a difficult one. At the Kennedy Space Center (KSC), the recently developed 4-Matrix (4-M) method represents a step in the right direction as it attempts to combine the traditional criteria of technical merits only with the new concern for cost-effectiveness. However, the 4-M method was not adequately successful in the actual prioritization of ESRs for the fiscal year 1995 (FY95). This research identifies a number of design issues that should help us to develop better methods. It emphasizes that given the variety and diversity of ESR's one should not expect that a single method could help in the assessment of all ESR's. One conclusion is that a methodology such as Costs, Risks, and Values Evaluation (CRAVE) should be adopted. It also is clear that the development of methods such as 4-M requires input not only from engineers with technical expertise in ESR's but also from personnel with adequate background in the theory and practice of cost-effectiveness analysis. At KSC, ESR prioritization is one part of the Ground Support Working Teams (GSWT) Integration Process. It was discovered that the more important barriers to the incorporation of cost-effectiveness considerations in ESR prioritization lie in this process. The culture of integration, and the corresponding structure of review by a committee of peers, is not conducive to the analysis and confrontation necessary in the assessment and prioritization of ESR's. Without assistance from appropriately trained analysts charged with the responsibility to analyze and be confrontational about each ESR, the GSWT steering committee will continue to make its decisions based on incomplete understanding, inconsistent numbers, and at times, colored facts. The current organizational separation of the prioritization and the funding processes is also identified as an important barrier to the pursuit of cost-effectiveness. Perhaps the greatest barrier is that, at the working level, KSC's culture is so preoccupied with technical concerns that it seems almost oblivious to any cost concerns, let alone cost-effectiveness concerns. It is recommended that we must urgently begin to change that culture and seek a better balance between these two concerns.

A systematic review and cost-effectiveness analysis of tonometer disinfection methods.

PubMed

Omar Akhtar, Ahmad; Singh, Hargurinder; Si, Francie; Hodge, William G

2014-08-01

The Goldmann applanation tonometer presents the problem of being one of the most widely used pieces of equipment in the ophthalmic clinic and a known risk factor for the transmission of epidemic keratoconjunctivitis (EKC). The purpose of this review is to assess the effectiveness of 3 methods of disinfection: alcohol swabs, immersion in peroxide, and the use of disposable prisms. An economic evaluation is undertaken to assess the cost-effectiveness of the 3 alternatives. In doing so, we contribute an evidence-based overview of the issue at an opportune time, because several jurisdictions are developing protocols regarding tonometer tip disinfection. Systematic review and cost-effectiveness analysis. A comprehensive literature review was undertaken with a librarian, comprising searches of 6 electronic databases and hand searches of the grey literature. A 3-level screening process was undertaken by 2 reviewers according to prespecified inclusion and exclusion criteria. Values from included papers were used to inform a cost-effectiveness analysis undertaken using a decision tree model implemented in TreeAge. The analysis was undertaken from the hospital perspective and included all equipment and labour costs. Synthesis of in vitro data indicates that all 3 methods are plausible methods of disinfection with a 64% reduction in log growth of EKC when peroxide is used compared with alcohol swabs. The incremental cost-effective ratios from the cost-effectiveness analysis were $12,000/case averted using peroxide and $61,000/case averted with Tonosafe as compared with alcohol. Assuming clinical infection rates match in vitro disinfection data, the cost of bleach is high and the cost of Tonosafe is unacceptably high to reduce 1 potential case of adenoviral keratoconjunctivitis. Copyright © 2014. Published by Elsevier Inc.

Effect of costing methods on unit cost of hospital medical services.

PubMed

Riewpaiboon, Arthorn; Malaroje, Saranya; Kongsawatt, Sukalaya

2007-04-01

To explore the variance of unit costs of hospital medical services due to different costing methods employed in the analysis. Retrospective and descriptive study at Kaengkhoi District Hospital, Saraburi Province, Thailand, in the fiscal year 2002. The process started with a calculation of unit costs of medical services as a base case. After that, the unit costs were re-calculated based on various methods. Finally, the variations of the results obtained from various methods and the base case were computed and compared. The total annualized capital cost of buildings and capital items calculated by the accounting-based approach (averaging the capital purchase prices throughout their useful life) was 13.02% lower than that calculated by the economic-based approach (combination of depreciation cost and interest on undepreciated portion over the useful life). A change of discount rate from 3% to 6% results in a 4.76% increase of the hospital's total annualized capital cost. When the useful life of durable goods was changed from 5 to 10 years, the total annualized capital cost of the hospital decreased by 17.28% from that of the base case. Regarding alternative criteria of indirect cost allocation, unit cost of medical services changed by a range of -6.99% to +4.05%. We explored the effect on unit cost of medical services in one department. Various costing methods, including departmental allocation methods, ranged between -85% and +32% against those of the base case. Based on the variation analysis, the economic-based approach was suitable for capital cost calculation. For the useful life of capital items, appropriate duration should be studied and standardized. Regarding allocation criteria, single-output criteria might be more efficient than the combined-output and complicated ones. For the departmental allocation methods, micro-costing method was the most suitable method at the time of study. These different costing methods should be standardized and developed as guidelines since they could affect implementation of the national health insurance scheme and health financing management.

Development of a method for efficient cost-effective screening of Aspergillus niger mutants having increased production of glucoamylase.

PubMed

Zhu, Xudong; Arman, Bessembayev; Chu, Ju; Wang, Yonghong; Zhuang, Yingping

2017-05-01

To develop an efficient cost-effective screening process to improve production of glucoamylase in Aspergillus niger. The cultivation of A. niger was achieved with well-dispersed morphology in 48-deep-well microtiter plates, which increased the throughput of the samples compared to traditional flask cultivation. There was a close negative correlation between glucoamylase and its pH of the fermentation broth. A novel high-throughput analysis method using Methyl Orange was developed. When compared to the conventional analysis method using 4-nitrophenyl α-D-glucopyranoside as substrate, a correlation coefficient of 0.96 by statistical analysis was obtained. Using this novel screening method, we acquired a strain with an activity of 2.2 × 10 3  U ml -1 , a 70% higher yield of glucoamylase than its parent strain.

Wind tunnel technology for the development of future commercial aircraft

NASA Technical Reports Server (NTRS)

Szodruch, J.

1986-01-01

Requirements for new technologies in the area of civil aircraft design are mainly related to the high cost involved in the purchase of modern, fuel saving aircraft. A second important factor is the long term rise in the price of fuel. The demonstration of the benefits of new technologies, as far as these are related to aerodynamics, will,for the foreseeable future, still be based on wind tunnel measurements. Theoretical computation methods are very successfully used in design work, wing optimization, and an estimation of the Reynolds number effect. However, wind tunnel tests are still needed to verify the feasibility of the considered concepts. Along with other costs, the cost for the wind tunnel tests needed for the development of an aircraft is steadily increasing. The present investigation is concerned with the effect of numerical aerodynamics and civil aircraft technology on the development of wind tunnels. Attention is given to the requirements for the wind tunnel, investigative methods, measurement technology, models, and the relation between wind tunnel experiments and theoretical methods.

Fault Tolerant Considerations and Methods for Guidance and Control Systems

DTIC Science & Technology

1987-07-01

multifunction devices such as microprocessors with software. In striving toward the economic goal, however, a cost is incurred in a different coin, i.e...therefore been developed which reduces the software risk to acceptable proportions. Several of the techniques thus developed incur no significant cost ...complex that their design and implementation need computerized tools in order to be cost -effective (in a broad sense, including the capability of

Variations in cost calculations in spine surgery cost-effectiveness research.

PubMed

Alvin, Matthew D; Miller, Jacob A; Lubelski, Daniel; Rosenbaum, Benjamin P; Abdullah, Kalil G; Whitmore, Robert G; Benzel, Edward C; Mroz, Thomas E

2014-06-01

Cost-effectiveness research in spine surgery has been a prominent focus over the last decade. However, there has yet to be a standardized method developed for calculation of costs in such studies. This lack of a standardized costing methodology may lead to conflicting conclusions on the cost-effectiveness of an intervention for a specific diagnosis. The primary objective of this study was to systematically review all cost-effectiveness studies published on spine surgery and compare and contrast various costing methodologies used. The authors performed a systematic review of the cost-effectiveness literature related to spine surgery. All cost-effectiveness analyses pertaining to spine surgery were identified using the cost-effectiveness analysis registry database of the Tufts Medical Center Institute for Clinical Research and Health Policy, and the MEDLINE database. Each article was reviewed to determine the study subject, methodology, and results. Data were collected from each study, including costs, interventions, cost calculation method, perspective of cost calculation, and definitions of direct and indirect costs if available. Thirty-seven cost-effectiveness studies on spine surgery were included in the present study. Twenty-seven (73%) of the studies involved the lumbar spine and the remaining 10 (27%) involved the cervical spine. Of the 37 studies, 13 (35%) used Medicare reimbursements, 12 (32%) used a case-costing database, 3 (8%) used cost-to-charge ratios (CCRs), 2 (5%) used a combination of Medicare reimbursements and CCRs, 3 (8%) used the United Kingdom National Health Service reimbursement system, 2 (5%) used a Dutch reimbursement system, 1 (3%) used the United Kingdom Department of Health data, and 1 (3%) used the Tricare Military Reimbursement system. Nineteen (51%) studies completed their cost analysis from the societal perspective, 11 (30%) from the hospital perspective, and 7 (19%) from the payer perspective. Of those studies with a societal perspective, 14 (38%) reported actual indirect costs. Changes in cost have a direct impact on the value equation for concluding whether an intervention is cost-effective. It is essential to develop a standardized, accurate means of calculating costs. Comparability and transparency are essential, such that studies can be compared properly and policy makers can be appropriately informed when making decisions for our health care system based on the results of these studies.

High-throughput determination of vancomycin in human plasma by a cost-effective system of two-dimensional liquid chromatography.

PubMed

Sheng, Yanghao; Zhou, Boting

2017-05-26

Therapeutic drug monitoring (TDM) is one of the most important services of clinical laboratories. Two main techniques are commonly used: the immunoassay and chromatography method. We have developed a cost-effective system of two-dimensional liquid chromatography with ultraviolet detection (2D-LC-UV) for high-throughput determination of vancomycin in human plasma that combines the automation and low start-up costs of the immunoassay with the high selectivity and sensitivity of the liquid chromatography coupled with mass spectrometric detection without incurring their disadvantages, achieving high cost-effectiveness. This 2D-LC system offers a large volume injection to provide sufficient sensitivity and uses simulated gradient peak compression technology to control peak broadening and to improve peak shape. A middle column was added to reduce the analysis cycle time and make it suitable for high-throughput routine clinical assays. The analysis cycle time was 4min and the peak width was 0.8min. Compared with other chromatographic methods that have been developed, the analysis cycle time and peak width for vancomycin was reduced significantly. The lower limit of quantification was 0.20μg/mL for vancomycin, which is the same as certain LC-MS/MS methods that have been recently developed and validated. The method is rapid, automated, and low-cost and has high selectivity and sensitivity for the quantification of vancomycin in human plasma, thus making it well-suited for use in hospital clinical laboratories. Copyright © 2017 Elsevier B.V. All rights reserved.

Cost effective management of space venture risks

NASA Technical Reports Server (NTRS)

Giuntini, Ronald E.; Storm, Richard E.

1986-01-01

The development of a model for the cost-effective management of space venture risks is discussed. The risk assessment and control program of insurance companies is examined. A simplified system development cycle which consists of a conceptual design phase, a preliminary design phase, a final design phase, a construction phase, and a system operations and maintenance phase is described. The model incorporates insurance safety risk methods and reliability engineering, and testing practices used in the development of large aerospace and defense systems.

An opportunity cost approach to sample size calculation in cost-effectiveness analysis.

PubMed

Gafni, A; Walter, S D; Birch, S; Sendi, P

2008-01-01

The inclusion of economic evaluations as part of clinical trials has led to concerns about the adequacy of trial sample size to support such analysis. The analytical tool of cost-effectiveness analysis is the incremental cost-effectiveness ratio (ICER), which is compared with a threshold value (lambda) as a method to determine the efficiency of a health-care intervention. Accordingly, many of the methods suggested to calculating the sample size requirements for the economic component of clinical trials are based on the properties of the ICER. However, use of the ICER and a threshold value as a basis for determining efficiency has been shown to be inconsistent with the economic concept of opportunity cost. As a result, the validity of the ICER-based approaches to sample size calculations can be challenged. Alternative methods for determining improvements in efficiency have been presented in the literature that does not depend upon ICER values. In this paper, we develop an opportunity cost approach to calculating sample size for economic evaluations alongside clinical trials, and illustrate the approach using a numerical example. We compare the sample size requirement of the opportunity cost method with the ICER threshold method. In general, either method may yield the larger required sample size. However, the opportunity cost approach, although simple to use, has additional data requirements. We believe that the additional data requirements represent a small price to pay for being able to perform an analysis consistent with both concept of opportunity cost and the problem faced by decision makers. Copyright (c) 2007 John Wiley & Sons, Ltd.

Cost effectiveness of a computer-delivered intervention to improve HIV medication adherence

PubMed Central

2013-01-01

Background High levels of adherence to medications for HIV infection are essential for optimal clinical outcomes and to reduce viral transmission, but many patients do not achieve required levels. Clinician-delivered interventions can improve patients’ adherence, but usually require substantial effort by trained individuals and may not be widely available. Computer-delivered interventions can address this problem by reducing required staff time for delivery and by making the interventions widely available via the Internet. We previously developed a computer-delivered intervention designed to improve patients’ level of health literacy as a strategy to improve their HIV medication adherence. The intervention was shown to increase patients’ adherence, but it was not clear that the benefits resulting from the increase in adherence could justify the costs of developing and deploying the intervention. The purpose of this study was to evaluate the relation of development and deployment costs to the effectiveness of the intervention. Methods Costs of intervention development were drawn from accounting reports for the grant under which its development was supported, adjusted for costs primarily resulting from the project’s research purpose. Effectiveness of the intervention was drawn from results of the parent study. The relation of the intervention’s effects to changes in health status, expressed as utilities, was also evaluated in order to assess the net cost of the intervention in terms of quality adjusted life years (QALYs). Sensitivity analyses evaluated ranges of possible intervention effectiveness and durations of its effects, and costs were evaluated over several deployment scenarios. Results The intervention’s cost effectiveness depends largely on the number of persons using it and the duration of its effectiveness. Even with modest effects for a small number of patients the intervention was associated with net cost savings in some scenarios and for durations greater than three months and longer it was usually associated with a favorable cost per QALY. For intermediate and larger assumed effects and longer durations of intervention effectiveness, the intervention was associated with net cost savings. Conclusions Computer-delivered adherence interventions may be a cost-effective strategy to improve adherence in persons treated for HIV. Trial registration Clinicaltrials.gov identifier NCT01304186. PMID:23446180

Cost-effectiveness in Clostridium difficile treatment decision-making

PubMed Central

Nuijten, Mark JC; Keller, Josbert J; Visser, Caroline E; Redekop, Ken; Claassen, Eric; Speelman, Peter; Pronk, Marja H

2015-01-01

AIM: To develop a framework for the clinical and health economic assessment for management of Clostridium difficile infection (CDI). METHODS: CDI has vast economic consequences emphasizing the need for innovative and cost effective solutions, which were aim of this study. A guidance model was developed for coverage decisions and guideline development in CDI. The model included pharmacotherapy with oral metronidazole or oral vancomycin, which is the mainstay for pharmacological treatment of CDI and is recommended by most treatment guidelines. RESULTS: A design for a patient-based cost-effectiveness model was developed, which can be used to estimate the cost-effectiveness of current and future treatment strategies in CDI. Patient-based outcomes were extrapolated to the population by including factors like, e.g., person-to-person transmission, isolation precautions and closing and cleaning wards of hospitals. CONCLUSION: The proposed framework for a population-based CDI model may be used for clinical and health economic assessments of CDI guidelines and coverage decisions for emerging treatments for CDI. PMID:26601096

Rapid Methods for the Detection of General Fecal Indicators

EPA Science Inventory

Specified that EPA should develop: appropriate and effective indicators for improving detection in a timely manner of pathogens in coastal waters appropriate, accurate, expeditious and cost-effective methods for the timely detection of pathogens in coastal waters

National economic models of industrial water use and waste treatment. [technology transfer

NASA Technical Reports Server (NTRS)

Thompson, R. G.; Calloway, J. A.

1974-01-01

The effects of air emission and solid waste restrictions on production costs and resource use by industry is investigated. A linear program is developed to analyze how resource use, production cost, and waste discharges in different types of production may be affected by resource limiting policies of the government. The method is applied to modeling ethylene and ammonia plants at the design stage. Results show that the effects of increasingly restrictive wastewater effluent standards on increased energy use were small in both plants. Plant models were developed for other industries and the program estimated effects of wastewater discharge policies on production costs of industry.

Mathematical modeling and pharmaceutical pricing: analyses used to inform in-licensing and developmental go/No-Go decisions.

PubMed

Vernon, John A; Hughen, W Keener; Johnson, Scott J

2005-05-01

In the face of significant real healthcare cost inflation, pressured budgets, and ongoing launches of myriad technology of uncertain value, payers have formalized new valuation techniques that represent a barrier to entry for drugs. Cost-effectiveness analysis predominates among these methods, which involves differencing a new technological intervention's marginal costs and benefits with a comparator's, and comparing the resulting ratio to a payer's willingness-to-pay threshold. In this paper we describe how firms are able to model the feasible range of future product prices when making in-licensing and developmental Go/No-Go decisions by considering payers' use of the cost-effectiveness method. We illustrate this analytic method with a simple deterministic example and then incorporate stochastic assumptions using both analytic and simulation methods. Using this strategic approach, firms may reduce product development and in-licensing risk.

Microfluidic biosensor for β-Hydroxybutyrate (βHBA) determination of subclinical ketosis diagnosis.

PubMed

Weng, Xuan; Zhao, Wenting; Neethirajan, Suresh; Duffield, Todd

2015-02-12

Determination of β-hydroxybutyrate (βHBA) is a gold standard for diagnosis of Subclinical Ketosis (SCK), a common disease in dairy cows that causes significant economic loss. Early detection of SCK can help reduce the risk of the disease progressing into clinical stage, thus minimizing economic losses on dairy cattle. Conventional laboratory methods are time consuming and labor-intensive, requiring expensive and bulky equipment. Development of portable and robust devices for rapid on-site SCK diagnosis is an effective way to prevent and control ketosis and can significantly aid in the management of dairy animal health. Microfluidic technology provides a rapid, cost-effective way to develop handheld devices for on-farm detection of sub-clinical ketosis. In this study, a highly sensitive microfluidics-based biosensor for on-site SCK diagnosis has been developed. A rapid, low-cost microfluidic biosensor with high sensitivity and specificity was developed for SCK diagnosis. Determination of βHBA was employed as the indicator in the diagnosis of SCK. On-chip detection using miniaturized and cost-effective optical sensor can be finished in 1 minute with a detection limit of 0.05 mM concentration. Developed microfluidic biosensor was successfully tested with the serum samples from dairy cows affected by SCK. The results of the developed biosensor agreed well with two other laboratory methods. The biosensor was characterized by high sensitivity and specificity towards βHBA with a detection limit of 0.05 mM. The developed microfluidic biosensor provides a promising prototype for a cost-effective handheld meter for on-site SCK diagnosis. By using microfluidic method, the detection time is significantly decreased compared to other laboratory methods. Here, we demonstrate a field-deployable device to precisely identify and measure subclinical ketosis by specific labeling and quantification of β-hydroxybutyate in cow blood samples. A real-time on-site detection system will maximize convenience for the farmers.

Can aging in place be cost effective? A systematic review.

PubMed

Graybill, Erin M; McMeekin, Peter; Wildman, John

2014-01-01

To systematically review cost, cost-minimization and cost-effectiveness studies for assisted living technologies (ALTs) that specifically enable older people to 'age in place' and highlight what further research is needed to inform decisions regarding aging in place. People aged 65+ and their live-in carers (where applicable), using an ALT to age in place at home opposed to a community-dwelling arrangement. Studies were identified using a predefined search strategy on two key economic and cost evaluation databases NHS EED, HEED. Studies were assessed using methods recommended by the Campbell and Cochrane Economic Methods Group and presented in a narrative synthesis style. Eight eligible studies were identified from North America spread over a diverse geographical range. The majority of studies reported the ALT intervention group as having lower resource use costs than the control group; though the low methodological quality and heterogeneity of the individual costs and outcomes reported across studies must be considered. The studies suggest that in some cases ALTs may reduce costs, though little data were identified and what there were was of poor quality. Methods to capture quality of life gains were not used, therefore potential effects on health and wellbeing may be missed. Further research is required using newer developments such as the capabilities approach. High quality studies assessing the cost-effectiveness of ALTs for ageing in place are required before robust conclusion on their use can be drawn.

Cost-effectiveness Analysis with Influence Diagrams.

PubMed

Arias, M; Díez, F J

2015-01-01

Cost-effectiveness analysis (CEA) is used increasingly in medicine to determine whether the health benefit of an intervention is worth the economic cost. Decision trees, the standard decision modeling technique for non-temporal domains, can only perform CEA for very small problems. To develop a method for CEA in problems involving several dozen variables. We explain how to build influence diagrams (IDs) that explicitly represent cost and effectiveness. We propose an algorithm for evaluating cost-effectiveness IDs directly, i.e., without expanding an equivalent decision tree. The evaluation of an ID returns a set of intervals for the willingness to pay - separated by cost-effectiveness thresholds - and, for each interval, the cost, the effectiveness, and the optimal intervention. The algorithm that evaluates the ID directly is in general much more efficient than the brute-force method, which is in turn more efficient than the expansion of an equivalent decision tree. Using OpenMarkov, an open-source software tool that implements this algorithm, we have been able to perform CEAs on several IDs whose equivalent decision trees contain millions of branches. IDs can perform CEA on large problems that cannot be analyzed with decision trees.

A decision-making framework for total ownership cost management of complex systems: A Delphi study

NASA Astrophysics Data System (ADS)

King, Russel J.

This qualitative study, using a modified Delphi method, was conducted to develop a decision-making framework for the total ownership cost management of complex systems in the aerospace industry. The primary focus of total ownership cost is to look beyond the purchase price when evaluating complex system life cycle alternatives. A thorough literature review and the opinions of a group of qualified experts resulted in a compilation of total ownership cost best practices, cost drivers, key performance factors, applicable assessment methods, practitioner credentials and potential barriers to effective implementation. The expert panel provided responses to the study questions using a 5-point Likert-type scale. Data were analyzed and provided to the panel members for review and discussion with the intent to achieve group consensus. As a result of the study, the experts agreed that a total ownership cost analysis should (a) be as simple as possible using historical data; (b) establish cost targets, metrics, and penalties early in the program; (c) monitor the targets throughout the product lifecycle and revise them as applicable historical data becomes available; and (d) directly link total ownership cost elements with other success factors during program development. The resultant study framework provides the business leader with incentives and methods to develop and implement strategies for controlling and reducing total ownership cost over the entire product life cycle when balancing cost, schedule, and performance decisions.

Cost effective use of liquid nitrogen in cryogenic wind tunnels

NASA Technical Reports Server (NTRS)

Mcintosh, Glen E.; Lombard, David S.; Martindale, David L.; Dunn, Robert P.

1987-01-01

A method of reliquefying from 12 to 19% of the nitrogen exhaust gas from a cryogenic wind tunnel has been developed. Technical feasibility and cost effectiveness of the system depends on performance of an innovative positive displacement expander which requires scale model testing to confirm design studies. The existing cryogenic system at the 0.3-m transonic cryogenic tunnel has been surveyed and extensive upgrades proposed. Upgrades are generally cost effective and may be implemented immediately since they are based on established technology.

A simple, rapid, cost-effective and sensitive method for detection of Salmonella in environmental and pecan samples.

PubMed

Dobhal, S; Zhang, G; Rohla, C; Smith, M W; Ma, L M

2014-10-01

PCR is widely used in the routine detection of foodborne human pathogens; however, challenges remain in overcoming PCR inhibitors present in some sample matrices. The objective of this study was to develop a simple, sensitive, cost-effective and rapid method for processing large numbers of environmental and pecan samples for Salmonella detection. This study was also aimed at validation of a new protocol for the detection of Salmonella from in-shell pecans. Different DNA template preparation methods, including direct boiling, prespin, multiple washing and commercial DNA extraction kits, were evaluated with pure cultures of Salmonella Typhimurium and with enriched soil, cattle feces and in-shell pecan each spiked individually with Salmonella Typhimurium. PCR detection of Salmonella was conducted using invA and 16S rRNA gene (internal amplification control) specific primers. The effect of amplification facilitators, including bovine serum albumin (BSA), polyvinylpyrrolidone (PVP), polyethylene glycol (PEG) and gelatin on PCR sensitivity, was also evaluated. Conducting a prespin of sample matrices in combination with the addition of 0·4% (w/v) BSA and 1% (w/v) PVP in PCR mix was the simplest, most rapid, cost-effective and sensitive method for PCR detection of Salmonella, with up to 40 CFU Salmonella per reaction detectable in the presence of over 10(9 ) CFU ml(-1) of background micro-organisms from enriched feces soil or pecan samples. The developed method is rapid, cost-effective and sensitive for detection of Salmonella from different matrices. This study provides a method with broad applicability for PCR detection of Salmonella in complex sample matrices. This method has a potential for its application in different research arenas and diagnostic laboratories. © 2014 The Society for Applied Microbiology.

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

2014-03-01

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences?more » 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?« less

Evaluation of a predevelopment service delivery intervention: an application to improve clinical handovers.

PubMed

Yao, Guiqing Lily; Novielli, Nicola; Manaseki-Holland, Semira; Chen, Yen-Fu; van der Klink, Marcel; Barach, Paul; Chilton, Peter J; Lilford, Richard J

2012-12-01

We developed a method to estimate the expected cost-effectiveness of a service intervention at the design stage and 'road-tested' the method on an intervention to improve patient handover of care between hospital and community. The development of a nine-step evaluation framework: 1. Identification of multiple endpoints and arranging them into manageable groups; 2. Estimation of baseline overall and preventable risk; 3. Bayesian elicitation of expected effectiveness of the planned intervention; 4. Assigning utilities to groups of endpoints; 5. Costing the intervention; 6. Estimating health service costs associated with preventable adverse events; 7. Calculating health benefits; 8. Cost-effectiveness calculation; 9. Sensitivity and headroom analysis. Literature review suggested that adverse events follow 19% of patient discharges, and that one-third are preventable by improved handover (ie, 6.3% of all discharges). The intervention to improve handover would reduce the incidence of adverse events by 21% (ie, from 6.3% to 4.7%) according to the elicitation exercise. Potentially preventable adverse events were classified by severity and duration. Utilities were assigned to each category of adverse event. The costs associated with each category of event were obtained from the literature. The unit cost of the intervention was €16.6, which would yield a Quality Adjusted Life Year (QALY) gain per discharge of 0.010. The resulting cost saving was €14.3 per discharge. The intervention is cost-effective at approximately €214 per QALY under the base case, and remains cost-effective while the effectiveness is greater than 1.6%. We offer a usable framework to assist in ex ante health economic evaluations of health service interventions.

Scenario drafting to anticipate future developments in technology assessment.

PubMed

Retèl, Valesca P; Joore, Manuela A; Linn, Sabine C; Rutgers, Emiel J T; van Harten, Wim H

2012-08-16

Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers.

Assessing the quality of cost management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fayne, V.; McAllister, A.; Weiner, S.B.

1995-12-31

Managing environmental programs can be effective only when good cost and cost-related management practices are developed and implemented. The Department of Energy`s Office of Environmental Management (EM), recognizing this key role of cost management, initiated several cost and cost-related management activities including the Cost Quality Management (CQM) Program. The CQM Program includes an assessment activity, Cost Quality Management Assessments (CQMAs), and a technical assistance effort to improve program/project cost effectiveness. CQMAs provide a tool for establishing a baseline of cost-management practices and for measuring improvement in those practices. The result of the CQMA program is an organization that has anmore » increasing cost-consciousness, improved cost-management skills and abilities, and a commitment to respond to the public`s concerns for both a safe environment and prudent budget outlays. The CQMA program is part of the foundation of quality management practices in DOE. The CQMA process has contributed to better cost and cost-related management practices by providing measurements and feedback; defining the components of a quality cost-management system; and helping sites develop/improve specific cost-management techniques and methods.« less

Ranking 93 health interventions for low- and middle-income countries by cost-effectiveness

PubMed Central

Gelband, Hellen; Jamison, Dean; Levin, Carol; Nugent, Rachel; Watkins, David

2017-01-01

Background Cost-effectiveness rankings of health interventions are useful inputs for national healthcare planning and budgeting. Previous comprehensive rankings for low- and middle- income countries were undertaken in 2005 and 2006, accompanying the development of strategies for the Millennium Development Goals. We update the rankings using studies published since 2000, as strategies are being considered for the Sustainable Development Goals. Methods Expert systematic searches of the literature were undertaken for a broad range of health interventions. Cost-effectiveness results using Disability Adjusted Life-Years (DALYs) as the health outcome were standardized to 2012 US dollars. Results 149 individual studies of 93 interventions qualified for inclusion. Interventions for Reproductive, Maternal, Newborn and Child Health accounted for 37% of interventions, and major infectious diseases (AIDS, TB, malaria and neglected tropical diseases) for 24%, consistent with the priorities of the Millennium Development Goals. More than half of the interventions considered cost less than $200 per DALY and hence can be considered for inclusion in Universal Health Care packages even in low-income countries. Discussion Important changes have occurred in rankings since 2006. Priorities have changed as a result of new technologies, new methods for changing behavior, and significant price changes for some vaccines and drugs. Achieving the Sustainable Development Goals will require LMICs to study a broader range of health interventions, particularly in adult health. Some interventions are no longer studied, in some cases because they have become usual care, in other cases because they are no longer relevant. Updating cost-effectiveness rankings on a regular basis is potentially a valuable exercise. PMID:28797115

Investment Success in Public Health: An Analysis of the Cost-Effectiveness and Cost-Benefit of the Global Programme to Eliminate Lymphatic Filariasis

PubMed Central

Bettis, Alison A.; Chu, Brian K.; McFarland, Deborah A.; Hooper, Pamela J.; Mante, Sunny D.; Fitzpatrick, Christopher; Bradley, Mark H.

2017-01-01

Abstract Background. It has been estimated that $154 million per year will be required during 2015–2020 to continue the Global Programme to Eliminate Lymphatic Filariasis (GPELF). In light of this, it is important to understand the program’s current value. Here, we evaluate the cost-effectiveness and cost-benefit of the preventive chemotherapy that was provided under the GPELF between 2000 and 2014. In addition, we also investigate the potential cost-effectiveness of hydrocele surgery. Methods. Our economic evaluation of preventive chemotherapy was based on previously published health and economic impact estimates (between 2000 and 2014). The delivery costs of treatment were estimated using a model developed by the World Health Organization. We also developed a model to investigate the number of disability-adjusted life years (DALYs) averted by a hydrocelectomy and identified the cost threshold under which it would be considered cost-effective. Results. The projected cost-effectiveness and cost-benefit of preventive chemotherapy were very promising, and this was robust over a wide range of costs and assumptions. When the economic value of the donated drugs was not included, the GPELF would be classed as highly cost-effective. We projected that a typical hydrocelectomy would be classed as highly cost-effective if the surgery cost less than $66 and cost-effective if less than $398 (based on the World Bank’s cost-effectiveness thresholds for low income countries). Conclusions. Both the preventive chemotherapy and hydrocele surgeries provided under the GPELF are incredibly cost-effective and offer a very good investment in public health. PMID:27956460

Assessing the Potential Cost-Effectiveness of Microneedle Patches in Childhood Measles Vaccination Programs: The Case for Further Research and Development.

PubMed

Adhikari, Bishwa B; Goodson, James L; Chu, Susan Y; Rota, Paul A; Meltzer, Martin I

2016-12-01

Currently available measles vaccines are administered by subcutaneous injections and require reconstitution with a diluent and a cold chain, which is resource intensive and challenging to maintain. To overcome these challenges and potentially increase vaccination coverage, microneedle patches are being developed to deliver the measles vaccine. This study compares the cost-effectiveness of using microneedle patches with traditional vaccine delivery by syringe-and-needle (subcutaneous vaccination) in children's measles vaccination programs. We built a simple spreadsheet model to compute the vaccination costs for using microneedle patch and syringe-and-needle technologies. We assumed that microneedle vaccines will be, compared with current vaccines, more heat stable and require less expensive cool chains when used in the field. We used historical data on the incidence of measles among communities with low measles vaccination rates. The cost of microneedle vaccination was estimated at US$0.95 (range US$0.71-US$1.18) for the first dose, compared with US$1.65 (range US$1.24-US$2.06) for the first dose delivered by subcutaneous vaccination. At 95 % vaccination coverage, microneedle patch vaccination was estimated to cost US$1.66 per measles case averted (range US$1.24-US$2.07) compared with an estimated cost of US$2.64 per case averted (range US$1.98-US$3.30) using subcutaneous vaccination. Use of microneedle patches may reduce costs; however, the cost-effectiveness of patches would depend on the vaccine recipients' acceptability and vaccine effectiveness of the patches relative to the existing conventional vaccine-delivery method. This study emphasizes the need to continue research and development of this vaccine-delivery method that could boost measles elimination efforts through improved access to vaccines and increased vaccination coverage.

Exploratory Development of Corrosion Inhibiting Primers

DTIC Science & Technology

1977-05-01

far superior in reproducibility and uniformity. The developed C-5301 electroprimer is readily adaptable to automated processing methods and can provide uniform, reproducible films which are cost effective.

Risk aversion and uncertainty in cost-effectiveness analysis: the expected-utility, moment-generating function approach.

PubMed

Elbasha, Elamin H

2005-05-01

The availability of patient-level data from clinical trials has spurred a lot of interest in developing methods for quantifying and presenting uncertainty in cost-effectiveness analysis (CEA). Although the majority has focused on developing methods for using sample data to estimate a confidence interval for an incremental cost-effectiveness ratio (ICER), a small strand of the literature has emphasized the importance of incorporating risk preferences and the trade-off between the mean and the variance of returns to investment in health and medicine (mean-variance analysis). This paper shows how the exponential utility-moment-generating function approach is a natural extension to this branch of the literature for modelling choices from healthcare interventions with uncertain costs and effects. The paper assumes an exponential utility function, which implies constant absolute risk aversion, and is based on the fact that the expected value of this function results in a convenient expression that depends only on the moment-generating function of the random variables. The mean-variance approach is shown to be a special case of this more general framework. The paper characterizes the solution to the resource allocation problem using standard optimization techniques and derives the summary measure researchers need to estimate for each programme, when the assumption of risk neutrality does not hold, and compares it to the standard incremental cost-effectiveness ratio. The importance of choosing the correct distribution of costs and effects and the issues related to estimation of the parameters of the distribution are also discussed. An empirical example to illustrate the methods and concepts is provided. Copyright 2004 John Wiley & Sons, Ltd

COST-EFFECTIVE SAMPLING FOR SPATIALLY DISTRIBUTED PHENOMENA

EPA Science Inventory

Various measures of sampling plan cost and loss are developed and analyzed as they relate to a variety of multidisciplinary sampling techniques. The sampling choices examined include methods from design-based sampling, model-based sampling, and geostatistics. Graphs and tables ar...

Low-cost manufacturing of the point focus concentrating module and its key component, the Fresnel lens. Final subcontract report, 31 January 1991--6 May 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saifee, T.; Konnerth, A. III

1991-11-01

Solar Kinetics, Inc. (SKI) has been developing point-focus concentrating PV modules since 1986. SKI is currently in position to manufacture between 200 to 600 kilowatts annually of the current design by a combination of manual and semi-automated methods. This report reviews the current status of module manufacture and specifies the required approach to achieve a high-volume manufacturing capability and low cost. The approach taken will include process development concurrent with module design for automated manufacturing. The current effort reviews the major manufacturing costs and identifies components and processes whose improvements would produce the greatest effect on manufacturability and cost reduction.more » The Fresnel lens is one such key component. Investigating specific alternative manufacturing methods and sources has substantially reduced the lens costs and has exceeded the DOE cost-reduction goals. 15 refs.« less

Cost-effective method for determining the grindability of ceramics. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, C.; Chand, R.H.

1997-02-01

The objective of this program was to develop a cost-effective method to determine the grindability of ceramics leading to cost-effective methods for machining such ceramics. In this first phase of activity, Chand Kare Technical Ceramics directed its efforts towards development of a definition for ceramic grindability, design of grindability-test experiments, and development of a ceramics-grindability test system (CGTS). The grindability study also included the establishment of the correlation between the grindability and conventional grinding practices. The above goals were achieved. A definition based on material removal rate under controlled force grinding was developed. Three prototypes CGTSs were developed and tested;more » suitable design was identified. Based on this, a fully automatic CGTS was developed and is ready for delivery to Oak Ridge National Laboratory. Comprehensive grindability tests for various commercially available engineering ceramics were conducted. Experimental results indicated that ceramics have significantly different grindabilities even though their mechanical properties were not significantly different. This implies that grindability of ceramics can be greatly improved. Further study is needed to establish correlations between microstructure and grindability. Therefore, grindability should be evaluated during the development of new ceramics or improvement of existing ones. In this report, the development of the ceramic-grindability definition, the development of CGTS, extensive grindability results, and the preliminary correlation between grindability and mechanical properties (such as flexural strength, hardness, elastic modulus, and fracture toughness) were summarized.« less

The 18 and 30 GHz fixed service communications satellite system study. [to determine the cost and performance characteristics

NASA Technical Reports Server (NTRS)

Bronstein, L. M.

1979-01-01

The use of the 18 and 30 GHz bands for fixed service satellite communications is examined. The cost and performance expected of 18 and 30 GHz hardware is assessed, selected trunking and direct to user concepts are optimized, and the cost of these systems are estimated. The effect of rain attenuation on the technical and economic viability of the system and methods circumventing the problem are discussed. Technology developments are investigated and cost estimates of these developments are presented.

[The socio-hygienic monitoring as an integral system for health risk assessment and risk management at the regional level].

PubMed

Kuzmin, S V; Gurvich, V B; Dikonskaya, O V; Malykh, O L; Yarushin, S V; Romanov, S V; Kornilkov, A S

2013-01-01

The information and analytical framework for the introduction of health risk assessment and risk management methodologies in the Sverdlovsk Region is the system of socio-hygienic monitoring. Techniques of risk management that take into account the choice of most cost-effective and efficient actions for improvement of the sanitary and epidemiologic situation at the level of the region, municipality, or a business entity of the Russian Federation, have been developed and proposed. To assess the efficiency of planning and activities for health risk management common method approaches and economic methods of "cost-effectiveness" and "cost-benefit" analyses provided in method recommendations and introduced in the Russian Federation are applied.

Patient-based surveying: a cost-effective approach for reaching large markets.

PubMed

Byer, S

1995-01-01

Member-based surveying is an important tool for managed care companies to discern newer and better ways in which to keep their current members satisfied, develop products that will attract new members, and to gauge changes of course in health consumer opinion. This article discusses a consumer friendly and cost-effective method to survey members and the general public that has produced a very positive response for a modest investment. The response rate will likely improve over time as the method gains broader acceptance.

Innovation in health economic modelling of service improvements for longer-term depression: demonstration in a local health community.

PubMed

Tosh, Jonathan; Kearns, Ben; Brennan, Alan; Parry, Glenys; Ricketts, Thomas; Saxon, David; Kilgarriff-Foster, Alexis; Thake, Anna; Chambers, Eleni; Hutten, Rebecca

2013-04-26

The purpose of the analysis was to develop a health economic model to estimate the costs and health benefits of alternative National Health Service (NHS) service configurations for people with longer-term depression. Modelling methods were used to develop a conceptual and health economic model of the current configuration of services in Sheffield, England for people with longer-term depression. Data and assumptions were synthesised to estimate cost per Quality Adjusted Life Years (QALYs). Three service changes were developed and resulted in increased QALYs at increased cost. Versus current care, the incremental cost-effectiveness ratio (ICER) for a self-referral service was £11,378 per QALY. The ICER was £2,227 per QALY for the dropout reduction service and £223 per QALY for an increase in non-therapy services. These results were robust when compared to current cost-effectiveness thresholds and accounting for uncertainty. Cost-effective service improvements for longer-term depression have been identified. Also identified were limitations of the current evidence for the long term impact of services.

The management of cardiovascular disease in the Netherlands: analysis of different programmes

PubMed Central

Cramm, Jane M.; Tsiachristas, Apostolos; Walters, Bethany H.; Adams, Samantha A.; Bal, Roland; Huijsman, Robbert; Rutten-Van Mölken, Maureen P.M.H.; Nieboer, Anna P.

2013-01-01

Background Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery. But, disease management programme development and implementation is a complex undertaking that requires effective decision-making. Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. Methods To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Results Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Conclusions Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in routine care. As care pathways become more complex, they also become more expensive. Better preparedness and training can prevent unnecessary delays during the implementation period and are crucial to reducing costs. PMID:24167456

Systematic review of incremental non-vaccine cost estimates used in cost-effectiveness analysis on the introduction of rotavirus and pneumococcal vaccines.

PubMed

De la Hoz-Restrepo, Fernando; Castañeda-Orjuela, Carlos; Paternina, Angel; Alvis-Guzman, Nelson

2013-07-02

To review the approaches used in the cost-effectiveness analysis (CEAs) literature to estimate the cost of expanded program on immunization (EPI) activities, other than vaccine purchase, for rotavirus and pneumococcal vaccines. A systematic review in PubMed and NHS EED databases of rotavirus and pneumococcal vaccines CEAs was done. Selected articles were read and information on how EPI costs were calculated was extracted. EPI costing approaches were classified according to the method or assumption used for estimation. Seventy-nine studies that evaluated cost effectiveness of rotavirus (n=43) or pneumococcal (n=36) vaccines were identified. In general, there are few details on how EPI costs other than vaccine procurement were estimated. While 30 studies used some measurement of that cost, only one study on pneumococcal vaccine used a primary cost evaluation (bottom-up costing analysis) and one study used a costing tool. Twenty-seven studies (17 on rotavirus and 10 on pneumococcal vaccine) assumed the non-vaccine costs. Five studies made no reference to additional costs. Fourteen studies (9 rotavirus and 5 pneumococcal) did not consider any additional EPI cost beyond vaccine procurement. For rotavirus studies, the median for non-vaccine cost per dose was US$0.74 in developing countries and US$6.39 in developed countries. For pneumococcal vaccines, the median for non-vaccine cost per dose was US$1.27 in developing countries and US$8.71 in developed countries. Many pneumococcal (52.8%) and rotavirus (60.4%) cost-effectiveness analyses did not consider additional EPI costs or used poorly supported assumptions. Ignoring EPI costs in addition to those for vaccine procurement in CEA analysis of new vaccines may lead to significant errors in the estimations of ICERs since several factors like personnel, cold chain, or social mobilization can be substantially affected by the introduction of new vaccines. Copyright © 2013 Elsevier Ltd. All rights reserved.

Resource costing for multinational neurologic clinical trials: methods and results.

PubMed

Schulman, K; Burke, J; Drummond, M; Davies, L; Carlsson, P; Gruger, J; Harris, A; Lucioni, C; Gisbert, R; Llana, T; Tom, E; Bloom, B; Willke, R; Glick, H

1998-11-01

We present the results of a multinational resource costing study for a prospective economic evaluation of a new medical technology for treatment of subarachnoid hemorrhage within a clinical trial. The study describes a framework for the collection and analysis of international resource cost data that can contribute to a consistent and accurate intercountry estimation of cost. Of the 15 countries that participated in the clinical trial, we collected cost information in the following seven: Australia, France, Germany, the UK, Italy, Spain, and Sweden. The collection of cost data in these countries was structured through the use of worksheets to provide accurate and efficient cost reporting. We converted total average costs to average variable costs and then aggregated the data to develop study unit costs. When unit costs were unavailable, we developed an index table, based on a market-basket approach, to estimate unit costs. To estimate the cost of a given procedure, the market-basket estimation process required that cost information be available for at least one country. When cost information was unavailable in all countries for a given procedure, we estimated costs using a method based on physician-work and practice-expense resource-based relative value units. Finally, we converted study unit costs to a common currency using purchasing power parity measures. Through this costing exercise we developed a set of unit costs for patient services and per diem hospital services. We conclude by discussing the implications of our costing exercise and suggest guidelines to facilitate more effective multinational costing exercises.

Design principles in telescope development: invariance, innocence, and the costs

NASA Astrophysics Data System (ADS)

Steinbach, Manfred

1997-03-01

Instrument design is, for the most part, a battle against errors and costs. Passive methods of error damping are in many cases effective and inexpensive. This paper shows examples of error minimization in our design of telescopes, instrumentation and evaluation instruments.

Report: Office of Research and Development Needs to Improve Its Method of Measuring Administrative Savings

EPA Pesticide Factsheets

Report #11-P-0333, July 14, 2011. ORD’s efforts to reduce its administrative costs are noteworthy, but ORD needs to improve its measurement mechanism for assessing the effectiveness of its initiatives to reduce administrative costs.

Time-Series Modeling and Simulation for Comparative Cost-Effective Analysis in Cancer Chemotherapy: An Application to Platinum-Based Regimens for Advanced Non-small Cell Lung Cancer.

PubMed

Chisaki, Yugo; Nakamura, Nobuhiko; Yano, Yoshitaka

2017-01-01

The purpose of this study was to propose a time-series modeling and simulation (M&S) strategy for probabilistic cost-effective analysis in cancer chemotherapy using a Monte-Carlo method based on data available from the literature. The simulation included the cost for chemotherapy, for pharmaceutical care for adverse events (AEs) and other medical costs. As an application example, we describe the analysis for the comparison of four regimens, cisplatin plus irinotecan, carboplatin plus paclitaxel, cisplatin plus gemcitabine (GP), and cisplatin plus vinorelbine, for advanced non-small cell lung cancer. The factors, drug efficacy explained by overall survival or time to treatment failure, frequency and severity of AEs, utility value of AEs to determine QOL, the drugs' and other medical costs in Japan, were included in the model. The simulation was performed and quality adjusted life years (QALY) and incremental cost-effectiveness ratios (ICER) were calculated. An index, percentage of superiority (%SUP) which is the rate of the increased cost vs. QALY-gained plots within the area of positive QALY-gained and also below some threshold values of the ICER, was calculated as functions of threshold values of the ICER. An M&S process was developed, and for the simulation example, the GP regimen was the most cost-effective, in case of threshold values of the ICER=$70000/year, the %SUP for the GP are more than 50%. We developed an M&S process for probabilistic cost-effective analysis, this method would be useful for decision-making in choosing a cancer chemotherapy regimen in terms of pharmacoeconomic.

A Better Way to Measure: New Survey Tool Gives Educators a Clear Picture of Professional Learning's Impact

ERIC Educational Resources Information Center

Blank, Rolf K.

2010-01-01

Just when educators are learning more about what constitutes effective professional development, a collaborative team of education researchers and practitioners have developed, tested, and implemented a cost-effective method of measuring and reporting on the quality of teacher professional development. The teacher professional development analysis…

Cost-Effectiveness of Thrombolysis within 4.5 Hours of Acute Ischemic Stroke in China

PubMed Central

Zhao, Xingquan; Liao, Xiaoling; Wang, Chunjuan; Du, Wanliang; Liu, Gaifen; Liu, Liping; Wang, Chunxue; Wang, Yilong; Wang, Yongjun

2014-01-01

Background Previous economic studies conducted in developed countries showed intravenous tissue-type plasminogen activator (tPA) is cost-effective for acute ischemic stroke. The present study aimed to determine the cost-effectiveness of tPA treatment in China, the largest developing country. Methods A combination of decision tree and Markov model was developed to determine the cost-effectiveness of tPA treatment versus non-tPA treatment within 4.5 hours after stroke onset. Outcomes and costs data were derived from the database of Thrombolysis Implementation and Monitor of acute ischemic Stroke in China (TIMS-China) study. Efficacy data were derived from a pooled analysis of ECASS, ATLANTIS, NINDS, and EPITHET trials. Costs and quality-adjusted life-years (QALYs) were compared in both short term (2 years) and long term (30 years). One-way and probabilistic sensitivity analyses were performed to test the robustness of the results. Results Comparing to non-tPA treatment, tPA treatment within 4.5 hours led to a short-term gain of 0.101 QALYs at an additional cost of CNY 9,520 (US$ 1,460), yielding an incremental cost-effectiveness ratio (ICER) of CNY 94,300 (US$ 14,500) per QALY gained in 2 years; and to a long-term gain of 0.422 QALYs at an additional cost of CNY 6,530 (US$ 1,000), yielding an ICER of CNY 15,500 (US$ 2,380) per QALY gained in 30 years. Probabilistic sensitivity analysis showed that tPA treatment is cost-effective in 98.7% of the simulations at a willingness-to-pay threshold of CNY 105,000 (US$ 16,200) per QALY. Conclusions Intravenous tPA treatment within 4.5 hours is highly cost-effective for acute ischemic strokes in China. PMID:25329637

Cost-effectiveness analysis of acute kidney injury biomarkers in pediatric cardiac surgery.

PubMed

Petrovic, Stanislava; Bogavac-Stanojevic, Natasa; Lakic, Dragana; Peco-Antic, Amira; Vulicevic, Irena; Ivanisevic, Ivana; Kotur-Stevuljevic, Jelena; Jelic-Ivanovic, Zorana

2015-01-01

Acute kidney injury (AKI) is significant problem in children with congenital heart disease (CHD) who undergo cardiac surgery. The economic impact of a biomarker-based diagnostic strategy for AKI in pediatric populations undergoing CHD surgery is unknown. The aim of this study was to perform the cost effectiveness analysis of using serum cystatin C (sCysC), urine neutrophil gelatinase-associated lipocalin (uNGAL) and urine liver fatty acid-binding protein (uL-FABP) for the diagnosis of AKI in children after cardiac surgery compared with current diagnostic method (monitoring of serum creatinine (sCr) level). We developed a decision analytical model to estimate incremental cost-effectiveness of different biomarker-based diagnostic strategies compared to current diagnostic strategy. The Markov model was created to compare the lifetime cost associated with using of sCysC, uNGAL, uL-FABP with monitoring of sCr level for the diagnosis of AKI. The utility measurement included in the analysis was quality-adjusted life years (QALY). The results of the analysis are presented as the incremental cost-effectiveness ratio (ICER). Analysed biomarker-based diagnostic strategies for AKI were cost-effective compared to current diagnostic method. However, uNGAL and sCys C strategies yielded higher costs and lower effectiveness compared to uL-FABP strategy. uL-FABP added 1.43 QALY compared to current diagnostic method at an additional cost of $8521.87 per patient. Therefore, ICER for uL-FABP compared to sCr was $5959.35/QALY. Our results suggest that the use of uL-FABP would represent cost effective strategy for early diagnosis of AKI in children after cardiac surgery.

Production of ELZM mirrors: performance coupled with attractive schedule, cost, and risk factors

NASA Astrophysics Data System (ADS)

Leys, Antoine; Hull, Tony; Westerhoff, Thomas

2016-08-01

Extreme light weighted ZERODUR Mirrors (ELZM) have been developed to exploit the superb thermal characteristics of ZERODUR. Coupled with up to date mechanical and optical fabrication methods this becomes an attractive technical approach. However the process of making mirror substrates has demonstrated to be unusually rapid and especially cost-effective. ELZM is aimed at the knee of the cost as a function of light weighting curve. ELZM mirrors are available at 88% light weighted. Together with their low risk, low cost production methods, this is presented as a strong option for NASA Explorer and Probe class missions.

Systematic process synthesis and design methods for cost effective waste minimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biegler, L.T.; Grossman, I.E.; Westerberg, A.W.

We present progress on our work to develop synthesis methods to aid in the design of cost effective approaches to waste minimization. Work continues to combine the approaches of Douglas and coworkers and of Grossmann and coworkers on a hierarchical approach where bounding information allows it to fit within a mixed integer programming approach. We continue work on the synthesis of reactors and of flexible separation processes. In the first instance, we strive for methods we can use to reduce the production of potential pollutants, while in the second we look for ways to recover and recycle solvents.

Bridge-in-a-Backpack(TM). Task 2 : reduction of costs through design modifications and optimization.

DOT National Transportation Integrated Search

2011-09-01

The cost effective use of FRP composites in infrastructure requires the efficient use of the : composite materials in the design. Previous work during the development phase and : demonstration phase illustrated the need to refine the design methods f...

General methodology: Costing, budgeting, and techniques for benefit-cost and cost-effectiveness analysis

NASA Technical Reports Server (NTRS)

Stretchberry, D. M.; Hein, G. F.

1972-01-01

The general concepts of costing, budgeting, and benefit-cost ratio and cost-effectiveness analysis are discussed. The three common methods of costing are presented. Budgeting distributions are discussed. The use of discounting procedures is outlined. The benefit-cost ratio and cost-effectiveness analysis is defined and their current application to NASA planning is pointed out. Specific practices and techniques are discussed, and actual costing and budgeting procedures are outlined. The recommended method of calculating benefit-cost ratios is described. A standardized method of cost-effectiveness analysis and long-range planning are also discussed.

Direct model-based predictive control scheme without cost function for voltage source inverters with reduced common-mode voltage

NASA Astrophysics Data System (ADS)

Kim, Jae-Chang; Moon, Sung-Ki; Kwak, Sangshin

2018-04-01

This paper presents a direct model-based predictive control scheme for voltage source inverters (VSIs) with reduced common-mode voltages (CMVs). The developed method directly finds optimal vectors without using repetitive calculation of a cost function. To adjust output currents with the CMVs in the range of -Vdc/6 to +Vdc/6, the developed method uses voltage vectors, as finite control resources, excluding zero voltage vectors which produce the CMVs in the VSI within ±Vdc/2. In a model-based predictive control (MPC), not using zero voltage vectors increases the output current ripples and the current errors. To alleviate these problems, the developed method uses two non-zero voltage vectors in one sampling step. In addition, the voltage vectors scheduled to be used are directly selected at every sampling step once the developed method calculates the future reference voltage vector, saving the efforts of repeatedly calculating the cost function. And the two non-zero voltage vectors are optimally allocated to make the output current approach the reference current as close as possible. Thus, low CMV, rapid current-following capability and sufficient output current ripple performance are attained by the developed method. The results of a simulation and an experiment verify the effectiveness of the developed method.

Digestion-ligation-only Hi-C is an efficient and cost-effective method for chromosome conformation capture.

PubMed

Lin, Da; Hong, Ping; Zhang, Siheng; Xu, Weize; Jamal, Muhammad; Yan, Keji; Lei, Yingying; Li, Liang; Ruan, Yijun; Fu, Zhen F; Li, Guoliang; Cao, Gang

2018-05-01

Chromosome conformation capture (3C) technologies can be used to investigate 3D genomic structures. However, high background noise, high costs, and a lack of straightforward noise evaluation in current methods impede the advancement of 3D genomic research. Here we developed a simple digestion-ligation-only Hi-C (DLO Hi-C) technology to explore the 3D landscape of the genome. This method requires only two rounds of digestion and ligation, without the need for biotin labeling and pulldown. Non-ligated DNA was efficiently removed in a cost-effective step by purifying specific linker-ligated DNA fragments. Notably, random ligation could be quickly evaluated in an early quality-control step before sequencing. Moreover, an in situ version of DLO Hi-C using a four-cutter restriction enzyme has been developed. We applied DLO Hi-C to delineate the genomic architecture of THP-1 and K562 cells and uncovered chromosomal translocations. This technology may facilitate investigation of genomic organization, gene regulation, and (meta)genome assembly.

Agile Development Methods for Space Operations

NASA Technical Reports Server (NTRS)

Trimble, Jay; Webster, Chris

2012-01-01

Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

FIELD ANALYTICAL METHODS: ADVANCED FIELD MONITORING METHODS DEVELOPMENT AND EVALUATION OF NEW AND INNOVATIVE TECHNOLOGIES THAT SUPPORT THE SITE CHARACTERIZATION AND MONITORING REQUIREMENTS OF THE SUPERFUND PROGRAM.

EPA Science Inventory

The overall goal of this task is to help reduce the uncertainties in the assessment of environmental health and human exposure by better characterizing hazardous wastes through cost-effective analytical methods. Research projects are directed towards the applied development and ...

Development of an economic model to assess the cost-effectiveness of hawthorn extract as an adjunct treatment for heart failure in Australia

PubMed Central

Ford, Emily; Adams, Jon; Graves, Nicholas

2012-01-01

Objective An economic model was developed to evaluate the cost-effectiveness of hawthorn extract as an adjunctive treatment for heart failure in Australia. Methods A Markov model of chronic heart failure was developed to compare the costs and outcomes of standard treatment and standard treatment with hawthorn extract. Health states were defined by the New York Heart Association (NYHA) classification system and death. For any given cycle, patients could remain in the same NYHA class, experience an improvement or deterioration in NYHA class, be hospitalised or die. Model inputs were derived from the published medical literature, and the output was quality-adjusted life years (QALYs). Probabilistic sensitivity analysis was conducted. The expected value of perfect information (EVPI) and the expected value of partial perfect information (EVPPI) were conducted to establish the value of further research and the ideal target for such research. Results Hawthorn extract increased costs by $1866.78 and resulted in a gain of 0.02 QALYs. The incremental cost-effectiveness ratio was $85 160.33 per QALY. The cost-effectiveness acceptability curve indicated that at a threshold of $40 000 the new treatment had a 0.29 probability of being cost-effective. The average incremental net monetary benefit (NMB) was −$1791.64, the average NMB for the standard treatment was $92 067.49, and for hawthorn extract $90 275.84. Additional research is potentially cost-effective if research is not proposed to cost more than $325 million. Utilities form the most important target parameter group for further research. Conclusions Hawthorn extract is not currently considered to be cost-effective in as an adjunctive treatment for heart failure in Australia. Further research in the area of utilities is warranted. PMID:22942231

A novel method for automated tracking and quantification of adult zebrafish behaviour during anxiety.

PubMed

Nema, Shubham; Hasan, Whidul; Bhargava, Anamika; Bhargava, Yogesh

2016-09-15

Behavioural neuroscience relies on software driven methods for behavioural assessment, but the field lacks cost-effective, robust, open source software for behavioural analysis. Here we propose a novel method which we called as ZebraTrack. It includes cost-effective imaging setup for distraction-free behavioural acquisition, automated tracking using open-source ImageJ software and workflow for extraction of behavioural endpoints. Our ImageJ algorithm is capable of providing control to users at key steps while maintaining automation in tracking without the need for the installation of external plugins. We have validated this method by testing novelty induced anxiety behaviour in adult zebrafish. Our results, in agreement with established findings, showed that during state-anxiety, zebrafish showed reduced distance travelled, increased thigmotaxis and freezing events. Furthermore, we proposed a method to represent both spatial and temporal distribution of choice-based behaviour which is currently not possible to represent using simple videograms. ZebraTrack method is simple and economical, yet robust enough to give results comparable with those obtained from costly proprietary software like Ethovision XT. We have developed and validated a novel cost-effective method for behavioural analysis of adult zebrafish using open-source ImageJ software. Copyright © 2016 Elsevier B.V. All rights reserved.

Generalisability in economic evaluation studies in healthcare: a review and case studies.

PubMed

Sculpher, M J; Pang, F S; Manca, A; Drummond, M F; Golder, S; Urdahl, H; Davies, L M; Eastwood, A

2004-12-01

To review, and to develop further, the methods used to assess and to increase the generalisability of economic evaluation studies. Electronic databases. Methodological studies relating to economic evaluation in healthcare were searched. This included electronic searches of a range of databases, including PREMEDLINE, MEDLINE, EMBASE and EconLit, and manual searches of key journals. The case studies of a decision analytic model involved highlighting specific features of previously published economic studies related to generalisability and location-related variability. The case-study involving the secondary analysis of cost-effectiveness analyses was based on the secondary analysis of three economic studies using data from randomised trials. The factor most frequently cited as generating variability in economic results between locations was the unit costs associated with particular resources. In the context of studies based on the analysis of patient-level data, regression analysis has been advocated as a means of looking at variability in economic results across locations. These methods have generally accepted that some components of resource use and outcomes are exchangeable across locations. Recent studies have also explored, in cost-effectiveness analysis, the use of tests of heterogeneity similar to those used in clinical evaluation in trials. The decision analytic model has been the main means by which cost-effectiveness has been adapted from trial to non-trial locations. Most models have focused on changes to the cost side of the analysis, but it is clear that the effectiveness side may also need to be adapted between locations. There have been weaknesses in some aspects of the reporting in applied cost-effectiveness studies. These may limit decision-makers' ability to judge the relevance of a study to their specific situations. The case study demonstrated the potential value of multilevel modelling (MLM). Where clustering exists by location (e.g. centre or country), MLM can facilitate correct estimates of the uncertainty in cost-effectiveness results, and also a means of estimating location-specific cost-effectiveness. The review of applied economic studies based on decision analytic models showed that few studies were explicit about their target decision-maker(s)/jurisdictions. The studies in the review generally made more effort to ensure that their cost inputs were specific to their target jurisdiction than their effectiveness parameters. Standard sensitivity analysis was the main way of dealing with uncertainty in the models, although few studies looked explicitly at variability between locations. The modelling case study illustrated how effectiveness and cost data can be made location-specific. In particular, on the effectiveness side, the example showed the separation of location-specific baseline events and pooled estimates of relative treatment effect, where the latter are assumed exchangeable across locations. A large number of factors are mentioned in the literature that might be expected to generate variation in the cost-effectiveness of healthcare interventions across locations. Several papers have demonstrated differences in the volume and cost of resource use between locations, but few studies have looked at variability in outcomes. In applied trial-based cost-effectiveness studies, few studies provide sufficient evidence for decision-makers to establish the relevance or to adjust the results of the study to their location of interest. Very few studies utilised statistical methods formally to assess the variability in results between locations. In applied economic studies based on decision models, most studies either stated their target decision-maker/jurisdiction or provided sufficient information from which this could be inferred. There was a greater tendency to ensure that cost inputs were specific to the target jurisdiction than clinical parameters. Methods to assess generalisability and variability in economic evaluation studies have been discussed extensively in the literature relating to both trial-based and modelling studies. Regression-based methods are likely to offer a systematic approach to quantifying variability in patient-level data. In particular, MLM has the potential to facilitate estimates of cost-effectiveness, which both reflect the variation in costs and outcomes between locations and also enable the consistency of cost-effectiveness estimates between locations to be assessed directly. Decision analytic models will retain an important role in adapting the results of cost-effectiveness studies between locations. Recommendations for further research include: the development of methods of evidence synthesis which model the exchangeability of data across locations and allow for the additional uncertainty in this process; assessment of alternative approaches to specifying multilevel models to the analysis of cost-effectiveness data alongside multilocation randomised trials; identification of a range of appropriate covariates relating to locations (e.g. hospitals) in multilevel models; and further assessment of the role of econometric methods (e.g. selection models) for cost-effectiveness analysis alongside observational datasets, and to increase the generalisability of randomised trials.

Cost and cost-effectiveness of HIV/AIDS prevention strategies in developing countries: is there an evidence base?

PubMed

Walker, Damian

2003-03-01

Many donors and countries are striving to respond to the HIV/AIDS epidemic by implementing prevention programmes. However, the resources available for providing these activities relative to needs are limited. Hence, decision-makers must choose among various types of interventions. Cost information, both measures of cost and cost-effectiveness, serves as a critical input into the processes of setting priorities and allocating resources efficiently. This paper reviews the cost and cost-effectiveness evidence base of HIV/AIDS prevention programmes in low- and middle-income countries (LMICs). None of the studies found have complete cost data for a full range of HIV/AIDS prevention programmes in any one country. However, the range of studies highlight the relative emphasis of different types of HIV/AIDS prevention strategies by region, reflecting the various modes of transmission and hence, to a certain extent, the stage of the epidemic. The costing methods applied and results obtained in this review give rise to questions of reliability, validity and transparency. First, not all of the studies report the methods used to calculate the costs, and/or do not provide all the necessary data inputs such that recalculation of the results is possible. Secondly, methods that are documented vary widely, rendering different studies, even within the same country and programme setting, largely incomparable. Finally, even with consistent and replicable measurement, the results as presented are generally not comparable because of the lack of a common outcome measure. Therefore, the extent to which the available cost and cost-effectiveness evidence base on HIV/AIDS prevention strategies can provide guidance to decision-makers is limited, and there is an urgent need for the generation of this knowledge for planning and decision-making.

Develop cost effective field monitoring and laboratory methods to measure groups of contaminants of emerging concern and/or legacy chemicals and pathogens

EPA Science Inventory

Analytical chemistry methods were developed to quantify numerous emerging contaminants (ECs), such as pharmaceuticals (i.e., tamoxifen, tamoxifen metabolites, aromatase inhibitors, antibiotics, illicit drugs, over-the-counter drugs) in aqueous samples (wastewater, surface waters)...

Development of Mobile Tracer Correlation Method for Quantification of Emissions from Landfills and Other Large Area Sources

EPA Science Inventory

There is an emerging need to develop cost effective measurement methods for greenhouse gas and air pollutant emissions from large area sources such as landfills, waste water treatment ponds, open area processing units, agricultural operations, CO2 sequestration fields, and site r...

Social cost impact assessment of pipeline infrastructure projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, John C., E-mail: matthewsj@battelle.org; Allouche, Erez N., E-mail: allouche@latech.edu; Sterling, Raymond L., E-mail: sterling@latech.edu

A key advantage of trenchless construction methods compared with traditional open-cut methods is their ability to install or rehabilitate underground utility systems with limited disruption to the surrounding built and natural environments. The equivalent monetary values of these disruptions are commonly called social costs. Social costs are often ignored by engineers or project managers during project planning and design phases, partially because they cannot be calculated using standard estimating methods. In recent years some approaches for estimating social costs were presented. Nevertheless, the cost data needed for validation of these estimating methods is lacking. Development of such social cost databasesmore » can be accomplished by compiling relevant information reported in various case histories. This paper identifies eight most important social cost categories, presents mathematical methods for calculating them, and summarizes the social cost impacts for two pipeline construction projects. The case histories are analyzed in order to identify trends for the various social cost categories. The effectiveness of the methods used to estimate these values is also discussed. These findings are valuable for pipeline infrastructure engineers making renewal technology selection decisions by providing a more accurate process for the assessment of social costs and impacts. - Highlights: • Identified the eight most important social cost factors for pipeline construction • Presented mathematical methods for calculating those social cost factors • Summarized social cost impacts for two pipeline construction projects • Analyzed those projects to identify trends for the social cost factors.« less

Bioanalytical methods for food contaminant analysis.

PubMed

Van Emon, Jeanette M

2010-01-01

Foods are complex mixtures of lipids, carbohydrates, proteins, vitamins, organic compounds, and other naturally occurring substances. Sometimes added to this mixture are residues of pesticides, veterinary and human drugs, microbial toxins, preservatives, contaminants from food processing and packaging, and other residues. This milieu of compounds can pose difficulties in the analysis of food contaminants. There is an expanding need for rapid and cost-effective residue methods for difficult food matrixes to safeguard our food supply. Bioanalytical methods are established for many food contaminants such as mycotoxins and are the method of choice for many food allergens. Bioanalytical methods are often more cost-effective and sensitive than instrumental procedures. Recent developments in bioanalytical methods may provide more applications for their use in food analysis.

Middle East respiratory syndrome: obstacles and prospects for vaccine development

PubMed Central

Papaneri, Amy B.; Johnson, Reed F.; Wada, Jiro; Bollinger, Laura; Jahrling, Peter B.; Kuhn, Jens H.

2016-01-01

Summary The recent emergence of Middle East respiratory syndrome (MERS) highlights the need to engineer new methods for expediting vaccine development against emerging diseases. However, several obstacles prevent pursuit of a licensable MERS vaccine. First, the lack of a suitable animal model for MERS complicates in vivo testing of candidate vaccines. Second, due to the low number of MERS cases, pharmaceutical companies have little incentive to pursue MERS vaccine production as the costs of clinical trials are high. In addition, the timeline from bench research to approved vaccine use is 10 years or longer. Using novel methods and cost-saving strategies, genetically engineered vaccines can be produced quickly and cost-effectively. Along with progress in MERS animal model development, these obstacles can be circumvented or at least mitigated. PMID:25864502

Missing data in trial-based cost-effectiveness analysis: An incomplete journey.

PubMed

Leurent, Baptiste; Gomes, Manuel; Carpenter, James R

2018-06-01

Cost-effectiveness analyses (CEA) conducted alongside randomised trials provide key evidence for informing healthcare decision making, but missing data pose substantive challenges. Recently, there have been a number of developments in methods and guidelines addressing missing data in trials. However, it is unclear whether these developments have permeated CEA practice. This paper critically reviews the extent of and methods used to address missing data in recently published trial-based CEA. Issues of the Health Technology Assessment journal from 2013 to 2015 were searched. Fifty-two eligible studies were identified. Missing data were very common; the median proportion of trial participants with complete cost-effectiveness data was 63% (interquartile range: 47%-81%). The most common approach for the primary analysis was to restrict analysis to those with complete data (43%), followed by multiple imputation (30%). Half of the studies conducted some sort of sensitivity analyses, but only 2 (4%) considered possible departures from the missing-at-random assumption. Further improvements are needed to address missing data in cost-effectiveness analyses conducted alongside randomised trials. These should focus on limiting the extent of missing data, choosing an appropriate method for the primary analysis that is valid under contextually plausible assumptions, and conducting sensitivity analyses to departures from the missing-at-random assumption. © 2018 The Authors Health Economics published by John Wiley & Sons Ltd.

REDUCED COST SEWER PIPE RELINING USING ULTRASONIC TAPE LAMINATION - PHASE II

EPA Science Inventory

During the Phase I program, Foster-Miller developed techniques based on Ultrasonic Tape Lamination (UTL) for joining of plasticized PVC sewer pipe liner. This effort was undertaken in response to a need for environmentally sound and cost-effective methods for rehabilitation of...

Conventional Development Versus Managed Growth: The Costs of Sprawl

PubMed Central

Burchell, Robert W.; Mukherji, Sahan

2003-01-01

Objectives. We examined the effects of sprawl, or conventional development, versus managed (or “smart”) growth on land and infrastructure consumption as well as on real estate development and public service costs in the United States. Methods. Mathematical impact models were used to produce US estimates of differences in resources consumed according to each growth scenario over the period 2000–2025. Results. Sprawl produces a 21% increase in amount of undeveloped land converted to developed land (2.4 million acres) and approximately a 10% increase in local road lane-miles (188 300). Furthermore, sprawl causes about 10% more annual public service (fiscal) deficits ($4.2 billion) and 8% higher housing occupancy costs ($13 000 per dwelling unit). Conclusions. Managed growth can save significant amounts of human and natural resources with limited effects on traditional development procedures. PMID:12948976

Long-term seafloor monitoring at an open ocean aquaculture site in the western Gulf of Maine, USA: development of an adaptive protocol.

PubMed

Grizzle, R E; Ward, L G; Fredriksson, D W; Irish, J D; Langan, R; Heinig, C S; Greene, J K; Abeels, H A; Peter, C R; Eberhardt, A L

2014-11-15

The seafloor at an open ocean finfish aquaculture facility in the western Gulf of Maine, USA was monitored from 1999 to 2008 by sampling sites inside a predicted impact area modeled by oceanographic conditions and fecal and food settling characteristics, and nearby reference sites. Univariate and multivariate analyses of benthic community measures from box core samples indicated minimal or no significant differences between impact and reference areas. These findings resulted in development of an adaptive monitoring protocol involving initial low-cost methods that required more intensive and costly efforts only when negative impacts were initially indicated. The continued growth of marine aquaculture is dependent on further development of farming methods that minimize negative environmental impacts, as well as effective monitoring protocols. Adaptive monitoring protocols, such as the one described herein, coupled with mathematical modeling approaches, have the potential to provide effective protection of the environment while minimize monitoring effort and costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Smear plus Detect-TB for a sensitive diagnosis of pulmonary tuberculosis: a cost-effectiveness analysis in an incarcerated population.

PubMed

Schmid, Karen Barros; Scherer, Luciene; Barcellos, Regina Bones; Kuhleis, Daniele; Prestes, Isaías Valente; Steffen, Ricardo Ewbank; Dalla Costa, Elis Regina; Rossetti, Maria Lucia Rosa

2014-12-16

Prison conditions can favor the spread of tuberculosis (TB). This study aimed to evaluate in a Brazilian prison: the performance and accuracy of smear, culture and Detect-TB; performance of smear plus culture and smear plus Detect-TB, according to different TB prevalence rates; and the cost-effectiveness of these procedures for pulmonary tuberculosis (PTB) diagnosis. This paper describes a cost-effectiveness study. A decision analytic model was developed to estimate the costs and cost-effectiveness of five routine diagnostic procedures for diagnosis of PTB using sputum specimens: a) Smear alone, b) Culture alone, c) Detect-TB alone, d) Smear plus culture and e) Smear plus Detect-TB. The cost-effectiveness ratio of costs were evaluated per correctly diagnosed TB case and all procedures costs were attributed based on the procedure costs adopted by the Brazilian Public Health System. A total of 294 spontaneous sputum specimens from patients suspected of having TB were analyzed. The sensibility and specificity were calculated to be 47% and 100% for smear; 93% and 100%, for culture; 74% and 95%, for Detect-TB; 96% and 100%, for smear plus culture; and 86% and 95%, for smear plus Detect-TB. The negative and positive predictive values for smear plus Detect-TB, according to different TB prevalence rates, ranged from 83 to 99% and 48 to 96%, respectively. In a cost-effectiveness analysis, smear was both less costly and less effective than the other strategies. Culture and smear plus culture were more effective but more costly than the other strategies. Smear plus Detect-TB was the most cost-effective method. The Detect-TB evinced to be sensitive and effective for the PTB diagnosis when applied with smear microscopy. Diagnostic methods should be improved to increase TB case detection. To support rational decisions about the implementation of such techniques, cost-effectiveness studies are essential, including in prisons, which are known for health care assessment problems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wayman, E. N.; Sclavounos, P. D.; Butterfield, S.

This article presents a collaborative research program that the Massachusetts Institute of Technology (MIT) and the National Renewable Energy Laboratory (NREL) have undertaken to develop innovative and cost-effective floating and mooring systems for offshore wind turbines in water depths of 10-200 m. Methods for the coupled structural, hydrodynamic, and aerodynamic analysis of floating wind turbine systems are presented in the frequency domain. This analysis was conducted by coupling the aerodynamics and structural dynamics code FAST [4] developed at NREL with the wave load and response simulation code WAMIT (Wave Analysis at MIT) [15] developed at MIT. Analysis tools were developedmore » to consider coupled interactions between the wind turbine and the floating system. These include the gyroscopic loads of the wind turbine rotor on the tower and floater, the aerodynamic damping introduced by the wind turbine rotor, the hydrodynamic damping introduced by wave-body interactions, and the hydrodynamic forces caused by wave excitation. Analyses were conducted for two floater concepts coupled with the NREL 5-MW Offshore Baseline wind turbine in water depths of 10-200 m: the MIT/NREL Shallow Drafted Barge (SDB) and the MIT/NREL Tension Leg Platform (TLP). These concepts were chosen to represent two different methods of achieving stability to identify differences in performance and cost of the different stability methods. The static and dynamic analyses of these structures evaluate the systems' responses to wave excitation at a range of frequencies, the systems' natural frequencies, and the standard deviations of the systems' motions in each degree of freedom in various wind and wave environments. This article in various wind and wave environments. This article explores the effects of coupling the wind turbine with the floating platform, the effects of water depth, and the effects of wind speed on the systems' performance. An economic feasibility analysis of the two concepts was also performed. Key cost components included the material and construction costs of the buoy; material and installation costs of the tethers, mooring lines, and anchor technologies; costs of transporting and installing the system at the chosen site; and the cost of mounting the wind turbine to the platform. The two systems were evaluated based on their static and dynamic performance and the total system installed cost. Both systems demonstrated acceptable motions, and have estimated costs of $1.4-$1.8 million, not including the cost of the wind turbine, the power electronics, or the electrical transmission.« less

Cost-Utility Analysis of Bariatric Surgery in Italy: Results of Decision-Analytic Modelling

PubMed Central

Lucchese, Marcello; Borisenko, Oleg; Mantovani, Lorenzo Giovanni; Cortesi, Paolo Angelo; Cesana, Giancarlo; Adam, Daniel; Burdukova, Elisabeth; Lukyanov, Vasily; Di Lorenzo, Nicola

2017-01-01

Objective To evaluate the cost-effectiveness of bariatric surgery in Italy from a third-party payer perspective over a medium-term (10 years) and a long-term (lifetime) horizon. Methods A state-transition Markov model was developed, in which patients may experience surgery, post-surgery complications, diabetes mellitus type 2, cardiovascular diseases or die. Transition probabilities, costs, and utilities were obtained from the Italian and international literature. Three types of surgeries were considered: gastric bypass, sleeve gastrectomy, and adjustable gastric banding. A base-case analysis was performed for the population, the characteristics of which were obtained from surgery candidates in Italy. Results In the base-case analysis, over 10 years, bariatric surgery led to cost increment of EUR 2,661 and generated additional 1.1 quality-adjusted life years (QALYs). Over a lifetime, surgery led to savings of EUR 8,649, additional 0.5 life years and 3.2 QALYs. Bariatric surgery was cost-effective at 10 years with an incremental cost-effectiveness ratio of EUR 2,412/QALY and dominant over conservative management over a lifetime. Conclusion In a comprehensive decision analytic model, a current mix of surgical methods for bariatric surgery was cost-effective at 10 years and cost-saving over the lifetime of the Italian patient cohort considered in this analysis. PMID:28601866

Development of a wireless displacement measurement system using acceleration responses.

PubMed

Park, Jong-Woong; Sim, Sung-Han; Jung, Hyung-Jo; Spencer, Billie F

2013-07-01

Displacement measurements are useful information for various engineering applications such as structural health monitoring (SHM), earthquake engineering and system identification. Most existing displacement measurement methods are costly, labor-intensive, and have difficulties particularly when applying to full-scale civil structures because the methods require stationary reference points. Indirect estimation methods converting acceleration to displacement can be a good alternative as acceleration transducers are generally cost-effective, easy to install, and have low noise. However, the application of acceleration-based methods to full-scale civil structures such as long span bridges is challenging due to the need to install cables to connect the sensors to a base station. This article proposes a low-cost wireless displacement measurement system using acceleration. Developed with smart sensors that are low-cost, wireless, and capable of on-board computation, the wireless displacement measurement system has significant potential to impact many applications that need displacement information at multiple locations of a structure. The system implements an FIR-filter type displacement estimation algorithm that can remove low frequency drifts typically caused by numerical integration of discrete acceleration signals. To verify the accuracy and feasibility of the proposed system, laboratory tests are carried out using a shaking table and on a three storey shear building model, experimentally confirming the effectiveness of the proposed system.

Development of a Wireless Displacement Measurement System Using Acceleration Responses

PubMed Central

Park, Jong-Woong; Sim, Sung-Han; Jung, Hyung-Jo; Spencer, Billie F.

2013-01-01

Displacement measurements are useful information for various engineering applications such as structural health monitoring (SHM), earthquake engineering and system identification. Most existing displacement measurement methods are costly, labor-intensive, and have difficulties particularly when applying to full-scale civil structures because the methods require stationary reference points. Indirect estimation methods converting acceleration to displacement can be a good alternative as acceleration transducers are generally cost-effective, easy to install, and have low noise. However, the application of acceleration-based methods to full-scale civil structures such as long span bridges is challenging due to the need to install cables to connect the sensors to a base station. This article proposes a low-cost wireless displacement measurement system using acceleration. Developed with smart sensors that are low-cost, wireless, and capable of on-board computation, the wireless displacement measurement system has significant potential to impact many applications that need displacement information at multiple locations of a structure. The system implements an FIR-filter type displacement estimation algorithm that can remove low frequency drifts typically caused by numerical integration of discrete acceleration signals. To verify the accuracy and feasibility of the proposed system, laboratory tests are carried out using a shaking table and on a three storey shear building model, experimentally confirming the effectiveness of the proposed system. PMID:23881123

Prevention, screening and treatment of colorectal cancer: a global and regional generalized cost effectiveness analysis

PubMed Central

2010-01-01

Background Regional generalized cost-effectiveness estimates of prevention, screening and treatment interventions for colorectal cancer are presented. Methods Standardised WHO-CHOICE methodology was used. A colorectal cancer model was employed to provide estimates of screening and treatment effectiveness. Intervention effectiveness was determined via a population state-transition model (PopMod) that simulates the evolution of a sub-regional population accounting for births, deaths and disease epidemiology. Economic costs of procedures and treatment were estimated, including programme overhead and training costs. Results In regions characterised by high income, low mortality and high existing treatment coverage, the addition of screening to the current high treatment levels is very cost-effective, although no particular intervention stands out in cost-effectiveness terms relative to the others. In regions characterised by low income, low mortality with existing treatment coverage around 50%, expanding treatment with or without screening is cost-effective or very cost-effective. Abandoning treatment in favour of screening (no treatment scenario) would not be cost effective. In regions characterised by low income, high mortality and low treatment levels, the most cost-effective intervention is expanding treatment. Conclusions From a cost-effectiveness standpoint, screening programmes should be expanded in developed regions and treatment programmes should be established for colorectal cancer in regions with low treatment coverage. PMID:20236531

Cost-effectiveness of antiplatelet drugs after percutaneous coronary intervention

PubMed Central

Wisløff, Torbjørn; Atar, Dan

2016-01-01

Abstract Aims Clopidogrel has, for long time, been accepted as the standard treatment for patients who have undergone a percutaneous coronary intervention (PCI). The introduction of prasugrel—and more recently, ticagrelor—has introduced a decision-making problem for clinicians and governments worldwide: to use the cheaper clopidogrel or the more effective, and also more expensive prasugrel or ticagrelor. We aim to give helpful contributions to this debate by analysing the cost-effectiveness of clopidogrel, prasugrel, and ticagrelor compared with each other. Methods and results We modified a previously developed Markov model of cardiac disease progression. In the model, we followed up cohorts of patients who have recently had a PCI until 100 years or death. Possible events are revascularization, bleeding, acute myocardial infarction, and death. Our analysis shows that ticagrelor is cost-effective in 77% of simulations at an incremental cost-effectiveness ratio of €7700 compared with clopidogrel. Ticagrelor was also cost-effective against prasugrel at a cost-effectiveness ratio of €7800. Given a Norwegian cost-effectiveness threshold of €70 000, both comparisons appear to be clearly cost-effective in favour of ticagrelor. Conclusion Ticagrelor is cost-effective compared with both clopidogrel and prasugrel for patients who have undergone a PCI. PMID:29474586

The effectiveness and cost-effectiveness of shared care: protocol for a realist review.

PubMed

Hardwick, Rebecca; Pearson, Mark; Byng, Richard; Anderson, Rob

2013-02-12

Shared care (an enhanced information exchange over and above routine outpatient letters) is commonly used to improve care coordination and communication between a specialist and primary care services for people with long-term conditions. Evidence of the effectiveness and cost-effectiveness of shared care is mixed. Informed decision-making for targeting shared care requires a greater understanding of how it works, for whom it works, in what contexts and why. This protocol outlines how realist review methods can be used to synthesise evidence on shared care for long-term conditions.A further aim of the review is to explore economic evaluations of shared care. Economic evaluations are difficult to synthesise due to problems in accounting for contextual differences that impact on resource use and opportunity costs. Realist review methods have been suggested as a way to overcome some of these issues, so this review will also assess whether realist review methods are amenable to synthesising economic evidence. Database and web searching will be carried out in order to find relevant evidence to develop and test programme theories about how shared care works. The review will have two phases. Phase 1 will concentrate on the contextual conditions and mechanisms that influence how shared care works, in order to develop programme theories, which partially explain how it works. Phase 2 will focus on testing these programme theories. A Project Reference Group made up of health service professionals and people with actual experience of long-term conditions will be used to ground the study in real-life experience. Review findings will be disseminated through local and sub-national networks for integrated care and long-term conditions. This realist review will explore why and for whom shared care works, in order to support decision-makers working to improve the effectiveness of care for people outside hospital. The development of realist review methods to take into account cost and cost-effectiveness evidence is particularly innovative and challenging, and if successful will offer a new approach to synthesising economic evidence. This systematic review protocol is registered on the PROSPERO database (registration number: CRD42012002842).

Modelling cost-effectiveness of different vasectomy methods in India, Kenya, and Mexico

PubMed Central

Seamans, Yancy; Harner-Jay, Claudia M

2007-01-01

Background Vasectomy is generally considered a safe and effective method of permanent contraception. The historical effectiveness of vasectomy has been questioned by recent research results indicating that the most commonly used method of vasectomy – simple ligation and excision (L and E) – appears to have a relatively high failure rate, with reported pregnancy rates as high as 4%. Updated methods such as fascial interposition (FI) and thermal cautery can lower the rate of failure but may require additional financial investments and may not be appropriate for low-resource clinics. In order to better compare the cost-effectiveness of these different vasectomy methods, we modelled the costs of different vasectomy methods using cost data collected in India, Kenya, and Mexico and effectiveness data from the latest published research. Methods The costs associated with providing vasectomies were determined in each country through interviews with clinic staff. Costs collected were economic, direct, programme costs of fixed vasectomy services but did not include large capital expenses or general recurrent costs for the health care facility. Estimates of the time required to provide service were gained through interviews and training costs were based on the total costs of vasectomy training programmes in each country. Effectiveness data were obtained from recent published studies and comparative cost-effectiveness was determined using cost per couple years of protection (CYP). Results In each country, the labour to provide the vasectomy and follow-up services accounts for the greatest portion of the overall cost. Because each country almost exclusively used one vasectomy method at all of the clinics included in the study, we modelled costs based on the additional material, labour, and training costs required in each country. Using a model of a robust vasectomy program, more effective methods such as FI and thermal cautery reduce the cost per CYP of a vasectomy by $0.08 – $0.55. Conclusion Based on the results presented, more effective methods of vasectomy – including FI, thermal cautery, and thermal cautery combined with FI – are more cost-effective than L and E alone. Analysis shows that for a programme in which a minimum of 20 clients undergo vasectomies per month, the cost per CYP is reduced in all three countries by updated vasectomy methods. PMID:17629921

Cost-effectiveness in the management of Dupuytren's contracture. A Canadian cost-utility analysis of current and future management strategies.

PubMed

Baltzer, H; Binhammer, P A

2013-08-01

In Canada, Dupuytren's contracture is managed with partial fasciectomy or percutaneous needle aponeurotomy (PNA). Injectable collagenase will soon be available. The optimal management of Dupuytren's contracture is controversial and trade-offs exist between the different methods. Using a cost-utility analysis approach, our aim was to identify the most cost-effective form of treatment for managing Dupuytren's contracture it and the threshold at which collagenase is cost-effective. We developed an expected-value decision analysis model for Dupuytren's contracture affecting a single finger, comparing the cost-effectiveness of fasciectomy, aponeurotomy and collagenase from a societal perspective. Cost-effectiveness, one-way sensitivity and variability analyses were performed using standard thresholds for cost effective treatment ($50 000 to $100 000/QALY gained). Percutaneous needle aponeurotomy was the preferred strategy for managing contractures affecting a single finger. The cost-effectiveness of primary aponeurotomy improved when repeated to treat recurrence. Fasciectomy was not cost-effective. Collagenase was cost-effective relative to and preferred over aponeurotomy at $875 and $470 per course of treatment, respectively. In summary, our model supports the trend towards non-surgical interventions for managing Dupuytren's contracture affecting a single finger. Injectable collagenase will only be feasible in our publicly funded healthcare system if it costs significantly less than current United States pricing.

The Effectiveness of Concurrent Design on the Cost and Schedule Performance of Defense Weapons System Acquisitions

NASA Astrophysics Data System (ADS)

Robertson, Randolph B.

This study investigates the impact of concurrent design on the cost growth and schedule growth of US Department of Defense Major Defense Acquisition Systems (MDAPs). It is motivated by the question of whether employment of concurrent design in the development of a major weapon system will produce better results in terms of cost and schedule than traditional serial development methods. Selected Acquisition Reports were used to determine the cost and schedule growth of MDAPs as well as the degree of concurrency employed. Two simple linear regression analyses were used to determine the degree to which cost growth and schedule growth vary with concurrency. The results were somewhat surprising in that for major weapon systems the utilization of concurrency as it was implemented in the programs under study was shown to have no effect on cost performance, and that performance to development schedule, one of the purported benefits of concurrency, was actually shown to deteriorate with increases in concurrency. These results, while not an indictment of the concept of concurrency, indicate that better practices and methods are needed in the implementation of concurrency in major weapon systems. The findings are instructive to stakeholders in the weapons acquisition process in their consideration of whether and how to employ concurrent design strategies in their planning of new weapons acquisition programs.

JOINING DISSIMILAR MATERIALS USING FRICTION STIR SCRIBE TECHNIQUE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep

2016-09-01

Development of robust and cost effective method of joining dissimilar materials can provide a critical pathway to enable widespread use of multi-material design and components in mainstream industrial applications. The use of multi-material components such as Steel-Aluminum, Aluminum-Polymer allows design engineers to optimize material utilization based on service requirements and often lead weight and cost reductions. However producing an effective joint between materials with vastly different thermal, microstructural and deformation response is highly problematic using conventional joining and /or fastening methods. This is especially challenging in cost sensitive high volume markets that largely rely on low–cost joining solutions. Friction Stirmore » Scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like Magnesium and Aluminum to high temperature materials like Steels and Titanium. Additionally viable joints between polymer composites and metal can also be made using this method. This paper will present state of the art, progress made and challenges associated with this innovative derivative of Friction Stir welding in reference to joining dissimilar metals and polymer/metal combinations.« less

Analysis of the U.S. geological survey streamgaging network

USGS Publications Warehouse

Scott, A.G.

1987-01-01

This paper summarizes the results from the first 3 years of a 5-year cost-effectiveness study of the U.S. Geological Survey streamgaging network. The objective of the study is to define and document the most cost-effective means of furnishing streamflow information. In the first step of this study, data uses were identified for 3,493 continuous-record stations currently being operated in 32 States. In the second step, evaluation of alternative methods of providing streamflow information, flow-routing models, and regression models were developed for estimating daily flows at 251 stations of the 3,493 stations analyzed. In the third step of the analysis, relationships were developed between the accuracy of the streamflow records and the operating budget. The weighted standard error for all stations, with current operating procedures, was 19.9 percent. By altering field activities, as determined by the analyses, this could be reduced to 17.8 percent. The existing streamgaging networks in four Districts were further analyzed to determine the impacts that satellite telemetry would have on the cost effectiveness. Satellite telemetry was not found to be cost effective on the basis of hydrologic data collection alone, given present cost of equipment and operation.This paper summarizes the results from the first 3 years of a 5-year cost-effectiveness study of the U. S. Geological Survey streamgaging network. The objective of the study is to define and document the most cost-effective means of furnishing streamflow information. In the first step of this study, data uses were identified for 3,493 continuous-record stations currently being operated in 32 States. In the second step, evaluation of alternative methods of providing streamflow information, flow-routing models, and regression models were developed for estimating daily flows at 251 stations of the 3, 493 stations analyzed. In the third step of the analysis, relationships were developed between the accuracy of the streamflow records and the operating budget. The weighted standard error for all stations, with current operating procedures, was 19. 9 percent. By altering field activities, as determined by the analyses, this could be reduced to 17. 8 percent. Additional study results are discussed.

Cost-Effectiveness Analysis of Three Leprosy Case Detection Methods in Northern Nigeria

PubMed Central

Ezenduka, Charles; Post, Erik; John, Steven; Suraj, Abdulkarim; Namadi, Abdulahi; Onwujekwe, Obinna

2012-01-01

Background Despite several leprosy control measures in Nigeria, child proportion and disability grade 2 cases remain high while new cases have not significantly reduced, suggesting continuous spread of the disease. Hence, there is the need to review detection methods to enhance identification of early cases for effective control and prevention of permanent disability. This study evaluated the cost-effectiveness of three leprosy case detection methods in Northern Nigeria to identify the most cost-effective approach for detection of leprosy. Methods A cross-sectional study was carried out to evaluate the additional benefits of using several case detection methods in addition to routine practice in two north-eastern states of Nigeria. Primary and secondary data were collected from routine practice records and the Nigerian Tuberculosis and Leprosy Control Programme of 2009. The methods evaluated were Rapid Village Survey (RVS), Household Contact Examination (HCE) and Traditional Healers incentive method (TH). Effectiveness was measured as number of new leprosy cases detected and cost-effectiveness was expressed as cost per case detected. Costs were measured from both providers' and patients' perspectives. Additional costs and effects of each method were estimated by comparing each method against routine practise and expressed as incremental cost-effectiveness ratio (ICER). All costs were converted to the U.S. dollar at the 2010 exchange rate. Univariate sensitivity analysis was used to evaluate uncertainties around the ICER. Results The ICER for HCE was $142 per additional case detected at all contact levels and it was the most cost-effective method. At ICER of $194 per additional case detected, THs method detected more cases at a lower cost than the RVS, which was not cost-effective at $313 per additional case detected. Sensitivity analysis showed that varying the proportion of shared costs and subsistent wage for valuing unpaid time did not significantly change the results. Conclusion Complementing routine practice with household contact examination is the most cost-effective approach to identify new leprosy cases and we recommend that, depending on acceptability and feasibility, this intervention is introduced for improved case detection in Northern Nigeria. PMID:23029580

Cost estimating methods for advanced space systems

NASA Technical Reports Server (NTRS)

Cyr, Kelley

1988-01-01

The development of parametric cost estimating methods for advanced space systems in the conceptual design phase is discussed. The process of identifying variables which drive cost and the relationship between weight and cost are discussed. A theoretical model of cost is developed and tested using a historical data base of research and development projects.

Presence/absence as a metric for monitoring vertebrate populations

Treesearch

Len Ruggiero; Dean Pearson

2000-01-01

Developing cost effective methods for monitoring vertebrate populations is a persistent problem in wildlife biology. Population demographic data is too costly and time intensive to acquire, so researchers have begun investigating presence/absence sampling as a means for monitoring wildlife populations. We examined three important assumptions regarding the probability...

Development of cost-effective surfactant flooding technology, Quarterly report, October 1995--December 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, G.A.; Sepehrnoori, K.

1995-12-31

The objective of this research is to develop cost-effective surfactant flooding technology by using simulation studies to evaluate and optimize alternative design strategies taking into account reservoir characteristics process chemistry, and process design options such as horizontal wells. Task 1 is the development of an improved numerical method for our simulator that will enable us to solve a wider class of these difficult simulation problems accurately and affordably. Task 2 is the application of this simulator to the optimization of surfactant flooding to reduce its risk and cost. In this quarter, we have continued working on Task 2 to optimizemore » surfactant flooding design and have included economic analysis to the optimization process. An economic model was developed using a spreadsheet and the discounted cash flow (DCF) method of economic analysis. The model was designed specifically for a domestic onshore surfactant flood and has been used to economically evaluate previous work that used a technical approach to optimization. The DCF model outputs common economic decision making criteria, such as net present value (NPV), internal rate of return (IRR), and payback period.« less

Mapping the Campus.

ERIC Educational Resources Information Center

Stigner, Kenneth J.

2001-01-01

Discusses how aerial photography and photogrammetry technology can help schools create visual records of their campus, land, and properties. Addresses efficiency and cost effectiveness of this method. Discusses how to develop the digital photogrammetry method for mapping from aerial photos. (GR)

Development of cost-effective VARTM technology for repair and hardening design method and specifications for ALDOT contractor : phase 3.

DOT National Transportation Integrated Search

2013-04-01

Resin infusion, a method of fabricating fiber reinforced polymer (FRP), has been shown to produce a stronger FRP of : more consistent quality than other methods. It is a preferred method of fabrication in industries like automotive, : aerospace, and ...

Low-Cost High-Pressure Hydrogen Generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cropley, Cecelia C.; Norman, Timothy J.

Electrolysis of water, particularly in conjunction with renewable energy sources, is potentially a cost-effective and environmentally friendly method of producing hydrogen at dispersed forecourt sites, such as automotive fueling stations. The primary feedstock for an electrolyzer is electricity, which could be produced by renewable sources such as wind or solar that do not produce carbon dioxide or other greenhouse gas emissions. However, state-of-the-art electrolyzer systems are not economically competitive for forecourt hydrogen production due to their high capital and operating costs, particularly the cost of the electricity used by the electrolyzer stack. In this project, Giner Electrochemical Systems, LLC (GES)more » developed a low cost, high efficiency proton-exchange membrane (PEM) electrolysis system for hydrogen production at moderate pressure (300 to 400 psig). The electrolyzer stack operates at differential pressure, with hydrogen produced at moderate pressure while oxygen is evolved at near-atmospheric pressure, reducing the cost of the water feed and oxygen handling subsystems. The project included basic research on catalysts and membranes to improve the efficiency of the electrolysis reaction as well as development of advanced materials and component fabrication methods to reduce the capital cost of the electrolyzer stack and system. The project culminated in delivery of a prototype electrolyzer module to the National Renewable Energy Laboratory for testing at the National Wind Technology Center. Electrolysis cell efficiency of 72% (based on the lower heating value of hydrogen) was demonstrated using an advanced high-strength membrane developed in this project. This membrane would enable the electrolyzer system to exceed the DOE 2012 efficiency target of 69%. GES significantly reduced the capital cost of a PEM electrolyzer stack through development of low cost components and fabrication methods, including a 60% reduction in stack parts count. Economic analysis indicates that hydrogen could be produced for $3.79 per gge at an electricity cost of $0.05/kWh by the lower-cost PEM electrolyzer developed in this project, assuming high-volume production of large-scale electrolyzer systems.« less

New Whole-House Solutions Case Study: HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story singlemore » family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

Material selection and assembly method of battery pack for compact electric vehicle

NASA Astrophysics Data System (ADS)

Lewchalermwong, N.; Masomtob, M.; Lailuck, V.; Charoenphonphanich, C.

2018-01-01

Battery packs become the key component in electric vehicles (EVs). The main costs of which are battery cells and assembling processes. The battery cell is indeed priced from battery manufacturers while the assembling cost is dependent on battery pack designs. Battery pack designers need overall cost as cheap as possible, but it still requires high performance and more safety. Material selection and assembly method as well as component design are very important to determine the cost-effectiveness of battery modules and battery packs. Therefore, this work presents Decision Matrix, which can aid in the decision-making process of component materials and assembly methods for a battery module design and a battery pack design. The aim of this study is to take the advantage of incorporating Architecture Analysis method into decision matrix methods by capturing best practices for conducting design architecture analysis in full account of key design components critical to ensure efficient and effective development of the designs. The methodology also considers the impacts of choice-alternatives along multiple dimensions. Various alternatives for materials and assembly techniques of battery pack are evaluated, and some sample costs are presented. Due to many components in the battery pack, only seven components which are positive busbar and Z busbar are represented in this paper for using decision matrix methods.

Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics

NASA Astrophysics Data System (ADS)

John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D.

2016-04-01

We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems.

Recommendations of the Panel on Cost-effectiveness in Health and Medicine.

PubMed

Weinstein, M C; Siegel, J E; Gold, M R; Kamlet, M S; Russell, L B

1996-10-16

To develop consensus-based recommendations for the conduct of cost-effectiveness analysis (CEA). This article, the second in a 3-part series, describes the basis for recommendations constituting the reference case analysis, the set of practices developed to guide CEAs that inform societal resource allocation decisions, and the content of these recommendations. The Panel on Cost-Effectiveness in Health and Medicine, a nonfederal panel with expertise in CEA, clinical medicine, ethics, and health outcomes measurement, was convened by the US Public Health Service (PHS). The panel reviewed the theoretical foundations of CEA, current practices, and alternative methods used in analyses. Recommendations were developed on the basis of theory where possible, but tempered by ethical and pragmatic considerations, as well as the needs of users. The panel developed recommendations through 2 1/2 years of discussions. Comments on preliminary drafts prepared by panel working groups were solicited from federal government methodologists, health agency officials, and academic methodologists. The panel's methodological recommendations address (1) components belonging in the numerator and denominator of a cost-effectiveness (C/E) ratio; (2) measuring resource use in the numerator of a C/E ratio; (3) valuing health consequences in the denominator of a C/E ratio; (4) estimating effectiveness of interventions; (5) incorporating time preference and discounting; and (6) handling uncertainty. Recommendations are subject to the ¿rule of reason,¿ balancing the burden engendered by a practice with its importance to a study. If researchers follow a standard set of methods in CEA, the quality and comparability of studies, and their ultimate utility, can be much improved.

Modelling cost-effectiveness of different vasectomy methods in India, Kenya, and Mexico.

PubMed

Seamans, Yancy; Harner-Jay, Claudia M

2007-07-13

Vasectomy is generally considered a safe and effective method of permanent contraception. The historical effectiveness of vasectomy has been questioned by recent research results indicating that the most commonly used method of vasectomy--simple ligation and excision (L and E)--appears to have a relatively high failure rate, with reported pregnancy rates as high as 4%. Updated methods such as fascial interposition (FI) and thermal cautery can lower the rate of failure but may require additional financial investments and may not be appropriate for low-resource clinics. In order to better compare the cost-effectiveness of these different vasectomy methods, we modelled the costs of different vasectomy methods using cost data collected in India, Kenya, and Mexico and effectiveness data from the latest published research. The costs associated with providing vasectomies were determined in each country through interviews with clinic staff. Costs collected were economic, direct, programme costs of fixed vasectomy services but did not include large capital expenses or general recurrent costs for the health care facility. Estimates of the time required to provide service were gained through interviews and training costs were based on the total costs of vasectomy training programmes in each country. Effectiveness data were obtained from recent published studies and comparative cost-effectiveness was determined using cost per couple years of protection (CYP). In each country, the labour to provide the vasectomy and follow-up services accounts for the greatest portion of the overall cost. Because each country almost exclusively used one vasectomy method at all of the clinics included in the study, we modelled costs based on the additional material, labour, and training costs required in each country. Using a model of a robust vasectomy program, more effective methods such as FI and thermal cautery reduce the cost per CYP of a vasectomy by $0.08-$0.55. Based on the results presented, more effective methods of vasectomy--including FI, thermal cautery, and thermal cautery combined with FI--are more cost-effective than L and E alone. Analysis shows that for a programme in which a minimum of 20 clients undergo vasectomies per month, the cost per CYP is reduced in all three countries by updated vasectomy methods.

Methods for the economic evaluation of changes to the organisation and delivery of health services: principal challenges and recommendations.

PubMed

Meacock, Rachel

2018-04-20

There is a requirement for economic evaluation of health technologies seeking public funding across Europe. Changes to the organisation and delivery of health services, including changes to health policy, are not covered by such appraisals. These changes also have consequences for National Health Service (NHS) funds, yet undergo no mandatory cost-effectiveness assessment. The focus on health technologies may have occurred because larger-scale service changes pose more complex challenges to evaluators. This paper discusses the principal challenges faced when performing economic evaluations of changes to the organisation and delivery of health services and provides recommendations for overcoming them. The five principal challenges identified are as follows: undertaking ex-ante evaluation; evaluating impacts in terms of quality-adjusted life years; assessing costs and opportunity costs; accounting for spillover effects; and generalisability. Of these challenges, methods for estimating the impact on costs and quality-adjusted life years are those most in need of development. Methods are available for ex-ante evaluation, assessing opportunity costs and examining generalisability. However, these are rarely applied in practice. The general principles of assessing the cost-effectiveness of interventions should be applied to all NHS spending, not just that involving health technologies. Advancements in this area have the potential to improve the allocation of scarce NHS resources.

An Evaluation of Clinical Economics and Cases of Cost-effectiveness.

PubMed

Takura, Tomoyuki

2018-05-01

In order to maintain and develop a universal health insurance system, it is crucial to utilize limited medical resources effectively. In this context, considerations are underway to introduce health technology assessments (HTAs), such as cost-effectiveness analyses (CEAs), into the medical treatment fee system. CEAs, which is the general term for these methods, are classified into four categories, such as cost-effectiveness analyses based on performance indicators, and in the comparison of health technologies, the incremental cost-effectiveness ratio (ICER) is also applied. When I comprehensively consider several Japanese studies based on these concepts, I find that, in the results of the analysis of the economic performance of healthcare systems, Japan shows the most promising trend in the world. In addition, there is research indicating the superior cost-effectiveness of Rituximab against refractory nephrotic syndrome, and it is expected that health economics will be actively applied to the valuation of technical innovations such as drug discovery.

23 CFR 635.204 - Determination of more cost effective method or an emergency.

Code of Federal Regulations, 2010 CFR

2010-04-01

... describing the project, the kinds of work to be performed, the method to be used, the estimated costs, the... 23 Highways 1 2010-04-01 2010-04-01 false Determination of more cost effective method or an... Determination of more cost effective method or an emergency. (a) Congress has expressly provided that the...

Automated installation methods for photovoltaic arrays

NASA Astrophysics Data System (ADS)

Briggs, R.; Daniels, A.; Greenaway, R.; Oster, J., Jr.; Racki, D.; Stoeltzing, R.

1982-11-01

Since installation expenses constitute a substantial portion of the cost of a large photovoltaic power system, methods for reduction of these costs were investigated. The installation of the photovoltaic arrays includes all areas, starting with site preparation (i.e., trenching, wiring, drainage, foundation installation, lightning protection, grounding and installation of the panel) and concluding with the termination of the bus at the power conditioner building. To identify the optimum combination of standard installation procedures and automated/mechanized techniques, the installation process was investigated including the equipment and hardware available, the photovoltaic array structure systems and interfaces, and the array field and site characteristics. Preliminary designs of hardware for both the standard installation method, the automated/mechanized method, and a mix of standard installation procedures and mechanized procedures were identified to determine which process effectively reduced installation costs. In addition, costs associated with each type of installation method and with the design, development and fabrication of new installation hardware were generated.

Analyzing medical costs with time-dependent treatment: The nested g-formula.

PubMed

Spieker, Andrew; Roy, Jason; Mitra, Nandita

2018-04-16

As medical expenses continue to rise, methods to properly analyze cost outcomes are becoming of increasing relevance when seeking to compare average costs across treatments. Inverse probability weighted regression models have been developed to address the challenge of cost censoring in order to identify intent-to-treat effects (i.e., to compare mean costs between groups on the basis of their initial treatment assignment, irrespective of any subsequent changes to their treatment status). In this paper, we describe a nested g-computation procedure that can be used to compare mean costs between two or more time-varying treatment regimes. We highlight the relative advantages and limitations of this approach when compared with existing regression-based models. We illustrate the utility of this approach as a means to inform public policy by applying it to a simulated data example motivated by costs associated with cancer treatments. Simulations confirm that inference regarding intent-to-treat effects versus the joint causal effects estimated by the nested g-formula can lead to markedly different conclusions regarding differential costs. Therefore, it is essential to prespecify the desired target of inference when choosing between these two frameworks. The nested g-formula should be considered as a useful, complementary tool to existing methods when analyzing cost outcomes. Copyright © 2018 John Wiley & Sons, Ltd.

A generalized concept for cost-effective structural design. [Statistical Decision Theory applied to aerospace systems

NASA Technical Reports Server (NTRS)

Thomas, J. M.; Hawk, J. D.

1975-01-01

A generalized concept for cost-effective structural design is introduced. It is assumed that decisions affecting the cost effectiveness of aerospace structures fall into three basic categories: design, verification, and operation. Within these basic categories, certain decisions concerning items such as design configuration, safety factors, testing methods, and operational constraints are to be made. All or some of the variables affecting these decisions may be treated probabilistically. Bayesian statistical decision theory is used as the tool for determining the cost optimum decisions. A special case of the general problem is derived herein, and some very useful parametric curves are developed and applied to several sample structures.

An introduction to clinical microeconomic analysis: purposes and analytic methods.

PubMed

Weintraub, W S; Mauldin, P D; Becker, E R

1994-06-01

The recent concern with health care economics has fostered the development of a new discipline that is generally called clinical microeconomics. This is a discipline in which microeconomic methods are used to study the economics of specific medical therapies. It is possible to perform stand alone cost analyses, but more profound insight into the medical decision making process may be accomplished by combining cost studies with measures of outcome. This is most often accomplished with cost-effectiveness or cost-utility studies. In cost-effectiveness studies there is one measure of outcome, often death. In cost-utility studies there are multiple measures of outcome, which must be grouped together to give an overall picture of outcome or utility. There are theoretical limitations to the determination of utility that must be accepted to perform this type of analysis. A summary statement of outcome is quality adjusted life years (QALYs), which is utility time socially discounted survival. Discounting is used because people value a year of future life less than a year of present life. Costs are made up of in-hospital direct, professional, follow-up direct, and follow-up indirect costs. Direct costs are for medical services. Indirect costs reflect opportunity costs such as lost time at work. Cost estimates are often based on marginal costs, or the cost for one additional procedure of the same type. Finally an overall statistic may be generated as cost per unit increase in effectiveness, such as dollars per QALY.(ABSTRACT TRUNCATED AT 250 WORDS)

Implications of employer coverage of contraception: Cost-effectiveness analysis of contraception coverage under an employer mandate.

PubMed

Canestaro, W; Vodicka, E; Downing, D; Trussell, J

2017-01-01

Mandatory employer-based insurance coverage of contraception in the US has been a controversial component of the Affordable Care Act (ACA). Prior research has examined the cost-effectiveness of contraception in general; however, no studies have developed a formal decision model in the context of the new ACA provisions. As such, this study aims to estimate the relative cost-effectiveness of insurance coverage of contraception under employer-sponsored insurance coverage taking into consideration newer regulations allowing for religious exemptions. A decision model was developed from the employer perspective to simulate pregnancy costs and outcomes associated with insurance coverage. Method-specific estimates of contraception failure rates, outcomes and costs were derived from the literature. Uptake by marital status and age was drawn from a nationally representative database. Providing no contraception coverage resulted in 33 more unintended pregnancies per 1000 women (95% confidence range: 22.4; 44.0). This subsequently significantly increased the number of unintended births and terminations. Total costs were higher among uninsured women owing to higher costs of pregnancy outcomes. The effect of no insurance was greatest on unmarried women 20-29 years old. Denying female employees' full coverage of contraceptives increases total costs from the employer perspective, as well as the total number of terminations. Insurance coverage was found to be significantly associated with women's choice of contraceptive method in a large nationally representative sample. Using a decision model to extrapolate to pregnancy outcomes, we found a large and statistically significant difference in unintended pregnancy and terminations. Denying women contraception coverage may have significant consequences for pregnancy outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

Overcoming Recruitment Challenges of Web-based Interventions for Tobacco Use: The Case of Web-based Acceptance and Commitment Therapy for Smoking Cessation

PubMed Central

Heffner, Jaimee L; Wyszynski, Christopher M; Comstock, Bryan; Mercer, Laina D.; Bricker, Jonathan

2013-01-01

Web-based behavioral interventions for substance use are being developed at a rapid pace, yet there is a dearth of information regarding the most effective methods for recruiting participants into web-based intervention trials. In this paper, we describe our successful recruitment of participants into a pilot trial of web-based Acceptance and Commitment Therapy (ACT) for smoking cessation and compare traditional and web-based methods of recruitment in terms of their effects on baseline participant characteristics, association with study retention and treatment outcome, yield, and cost-effectiveness. Over a 10-week period starting June 15, 2010, we recruited 222 smokers for a web-based smoking cessation study using a variety of recruitment methods. The largest portion of randomized participants were recruited through Google AdWords (36%), followed by medical Internet media (23%), standard media (14%), word of mouth (12%), broadcast emails (11%), and social media (6%). Recruitment source was not related to baseline participant characteristics, 3-month data retention, or 30-day point prevalence smoking abstinence at the 3-month outcome assessment. Cost per randomized participant ranged from $5.27/participant for word of mouth to $172.76/participant for social media, with a mean cost of $42.48/participant. Our diversified approach to recruitment, including both traditional and web-based methods, enabled timely enrollment of participants into the study. Because there was no evidence of a substantive difference in baseline characteristics, retention, or outcomes based on recruitment channel, the yield and cost-effectiveness of recruitment methods may be the more critical considerations in developing a feasible recruitment plan for a web-based smoking cessation intervention study. PMID:23770645

Overcoming recruitment challenges of web-based interventions for tobacco use: the case of web-based acceptance and commitment therapy for smoking cessation.

PubMed

Heffner, Jaimee L; Wyszynski, Christopher M; Comstock, Bryan; Mercer, Laina D; Bricker, Jonathan

2013-10-01

Web-based behavioral interventions for substance use are being developed at a rapid pace, yet there is a dearth of information regarding the most effective methods for recruiting participants into web-based intervention trials. In this paper, we describe our successful recruitment of participants into a pilot trial of web-based Acceptance and Commitment Therapy (ACT) for smoking cessation and compare traditional and web-based methods of recruitment in terms of their effects on baseline participant characteristics, association with study retention and treatment outcome, yield, and cost-effectiveness. Over a 10-week period starting June 15, 2010, we recruited 222 smokers for a web-based smoking cessation study using a variety of recruitment methods. The largest portion of randomized participants were recruited through Google AdWords (36%), followed by medical Internet media (23%), standard media (14%), word of mouth (12%), broadcast emails (11%), and social media (6%). Recruitment source was not related to baseline participant characteristics, 3-month data retention, or 30-day point prevalence smoking abstinence at the 3-month outcome assessment. Cost per randomized participant ranged from $5.27/participant for word of mouth to $172.76/participant for social media, with a mean cost of $42.48/participant. Our diversified approach to recruitment, including both traditional and web-based methods, enabled timely enrollment of participants into the study. Because there was no evidence of a substantive difference in baseline characteristics, retention, or outcomes based on recruitment channel, the yield and cost-effectiveness of recruitment methods may be the more critical considerations in developing a feasible recruitment plan for a web-based smoking cessation intervention study. Copyright © 2013 Elsevier Ltd. All rights reserved.

ScreenCube: A 3D Printed System for Rapid and Cost-Effective Chemical Screening in Adult Zebrafish.

PubMed

Monstad-Rios, Adrian T; Watson, Claire J; Kwon, Ronald Y

2018-02-01

Phenotype-based small molecule screens in zebrafish embryos and larvae have been successful in accelerating pathway and therapeutic discovery for diverse biological processes. Yet, the application of chemical screens to adult physiologies has been relatively limited due to additional demands on cost, space, and labor associated with screens in adult animals. In this study, we present a 3D printed system and methods for intermittent drug dosing that enable rapid and cost-effective chemical administration in adult zebrafish. Using prefilled screening plates, the system enables dosing of 96 fish in ∼3 min, with a 10-fold reduction in drug quantity compared to that used in previous chemical screens in adult zebrafish. We characterize water quality kinetics during immersion in the system and use these kinetics to rationally design intermittent dosing regimens that result in 100% fish survival. As a demonstration of system fidelity, we show the potential to identify two known chemical inhibitors of adult tail fin regeneration, cyclopamine and dorsomorphin. By developing methods for rapid and cost-effective chemical administration in adult zebrafish, this study expands the potential for small molecule discovery in postembryonic models of development, disease, and regeneration.

Productivity costs in economic evaluations: past, present, future.

PubMed

Krol, Marieke; Brouwer, Werner; Rutten, Frans

2013-07-01

Productivity costs occur when the productivity of individuals is affected by illness, treatment, disability or premature death. The objective of this paper was to review past and current developments related to the inclusion, identification, measurement and valuation of productivity costs in economic evaluations. The main debates in the theory and practice of economic evaluations of health technologies described in this review have centred on the questions of whether and how to include productivity costs, especially productivity costs related to paid work. The past few decades have seen important progress in this area. There are important sources of productivity costs other than absenteeism (e.g. presenteeism and multiplier effects in co-workers), but their exact influence on costs remains unclear. Different measurement instruments have been developed over the years, but which instrument provides the most accurate estimates has not been established. Several valuation approaches have been proposed. While empirical research suggests that productivity costs are best included in the cost side of the cost-effectiveness ratio, the jury is still out regarding whether the human capital approach or the friction cost approach is the most appropriate valuation method to do so. Despite the progress and the substantial amount of scientific research, a consensus has not been reached on either the inclusion of productivity costs in economic evaluations or the methods used to produce productivity cost estimates. Such a lack of consensus has likely contributed to ignoring productivity costs in actual economic evaluations and is reflected in variations in national health economic guidelines. Further research is needed to lessen the controversy regarding the estimation of health-related productivity costs. More standardization would increase the comparability and credibility of economic evaluations taking a societal perspective.

Assessing the Efficiency of HIV Prevention around the World: Methods of the PANCEA Project

PubMed Central

Marseille, Elliot; Dandona, Lalit; Saba, Joseph; McConnel, Coline; Rollins, Brandi; Gaist, Paul; Lundberg, Mattias; Over, Mead; Bertozzi, Stefano; Kahn, James G

2004-01-01

Objective To develop data collection methods suitable to obtain data to assess the costs, cost-efficiency, and cost-effectiveness of eight types of HIV prevention programs in five countries. Data Sources/Study Setting Primary data collection from prevention programs for 2002–2003 and prior years, in Uganda, South Africa, India, Mexico, and Russia. Study Design This study consisted of a retrospective review of HIV prevention programs covering one to several years of data. Key variables include services delivered (outputs), quality indicators, and costs. Data Collection/Extraction Methods Data were collected by trained in-country teams during week-long site visits, by reviewing service and financial records and interviewing program managers and clients. Principal Findings Preliminary data suggest that the unit cost of HIV prevention programs may be both higher and more variable than previous studies suggest. Conclusions A mix of standard data collection methods can be successfully implemented across different HIV prevention program types and countries. These methods can provide comprehensive services and cost data, which may carry valuable information for the allocation of HIV prevention resources. PMID:15544641

Cost-effective conservation of an endangered frog under uncertainty.

PubMed

Rose, Lucy E; Heard, Geoffrey W; Chee, Yung En; Wintle, Brendan A

2016-04-01

How should managers choose among conservation options when resources are scarce and there is uncertainty regarding the effectiveness of actions? Well-developed tools exist for prioritizing areas for one-time and binary actions (e.g., protect vs. not protect), but methods for prioritizing incremental or ongoing actions (such as habitat creation and maintenance) remain uncommon. We devised an approach that combines metapopulation viability and cost-effectiveness analyses to select among alternative conservation actions while accounting for uncertainty. In our study, cost-effectiveness is the ratio between the benefit of an action and its economic cost, where benefit is the change in metapopulation viability. We applied the approach to the case of the endangered growling grass frog (Litoria raniformis), which is threatened by urban development. We extended a Bayesian model to predict metapopulation viability under 9 urbanization and management scenarios and incorporated the full probability distribution of possible outcomes for each scenario into the cost-effectiveness analysis. This allowed us to discern between cost-effective alternatives that were robust to uncertainty and those with a relatively high risk of failure. We found a relatively high risk of extinction following urbanization if the only action was reservation of core habitat; habitat creation actions performed better than enhancement actions; and cost-effectiveness ranking changed depending on the consideration of uncertainty. Our results suggest that creation and maintenance of wetlands dedicated to L. raniformis is the only cost-effective action likely to result in a sufficiently low risk of extinction. To our knowledge we are the first study to use Bayesian metapopulation viability analysis to explicitly incorporate parametric and demographic uncertainty into a cost-effective evaluation of conservation actions. The approach offers guidance to decision makers aiming to achieve cost-effective conservation under uncertainty. © 2015 Society for Conservation Biology.

Cost-Effectiveness of a Chemoprophylactic Intervention with Single Dose Rifampicin in Contacts of New Leprosy Patients

PubMed Central

Idema, Willemijn J.; Majer, Istvan M.; Pahan, David; Oskam, Linda; Polinder, Suzanne; Richardus, Jan Hendrik

2010-01-01

Background With 249,007 new leprosy patients detected globally in 2008, it remains necessary to develop new and effective interventions to interrupt the transmission of M. leprae. We assessed the economic benefits of single dose rifampicin (SDR) for contacts as chemoprophylactic intervention in the control of leprosy. Methods We conducted a single centre, double blind, cluster randomised, placebo controlled trial in northwest Bangladesh between 2002 and 2007, including 21,711 close contacts of 1,037 patients with newly diagnosed leprosy. We gave a single dose of rifampicin or placebo to close contacts, with follow-up for four years. The main outcome measure was the development of clinical leprosy. We assessed the cost effectiveness by calculating the incremental cost effectiveness ratio (ICER) between the standard multidrug therapy (MDT) program with the additional chemoprophylaxis intervention versus the standard MDT program only. The ICER was expressed in US dollars per prevented leprosy case. Findings Chemoprophylaxis with SDR for preventing leprosy among contacts of leprosy patients is cost-effective at all contact levels and thereby a cost-effective prevention strategy. In total, $6,009 incremental cost was invested and 38 incremental leprosy cases were prevented, resulting in an ICER of $158 per one additional prevented leprosy case. It was the most cost-effective in neighbours of neighbours and social contacts (ICER $214), slightly less cost-effective in next door neighbours (ICER $497) and least cost-effective among household contacts (ICER $856). Conclusion Chemoprophylaxis with single dose rifampicin given to contacts of newly diagnosed leprosy patients is a cost-effective intervention strategy. Implementation studies are necessary to establish whether this intervention is acceptable and feasible in other leprosy endemic areas of the world. PMID:21072235

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

2014-03-01

BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The followingmore » research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.« less

Removing Barriers for Effective Deployment of Intermittent Renewable Generation

NASA Astrophysics Data System (ADS)

Arabali, Amirsaman

The stochastic nature of intermittent renewable resources is the main barrier to effective integration of renewable generation. This problem can be studied from feeder-scale and grid-scale perspectives. Two new stochastic methods are proposed to meet the feeder-scale controllable load with a hybrid renewable generation (including wind and PV) and energy storage system. For the first method, an optimization problem is developed whose objective function is the cost of the hybrid system including the cost of renewable generation and storage subject to constraints on energy storage and shifted load. A smart-grid strategy is developed to shift the load and match the renewable energy generation and controllable load. Minimizing the cost function guarantees minimum PV and wind generation installation, as well as storage capacity selection for supplying the controllable load. A confidence coefficient is allocated to each stochastic constraint which shows to what degree the constraint is satisfied. In the second method, a stochastic framework is developed for optimal sizing and reliability analysis of a hybrid power system including renewable resources (PV and wind) and energy storage system. The hybrid power system is optimally sized to satisfy the controllable load with a specified reliability level. A load-shifting strategy is added to provide more flexibility for the system and decrease the installation cost. Load shifting strategies and their potential impacts on the hybrid system reliability/cost analysis are evaluated trough different scenarios. Using a compromise-solution method, the best compromise between the reliability and cost will be realized for the hybrid system. For the second problem, a grid-scale stochastic framework is developed to examine the storage application and its optimal placement for the social cost and transmission congestion relief of wind integration. Storage systems are optimally placed and adequately sized to minimize the sum of operation and congestion costs over a scheduling period. A technical assessment framework is developed to enhance the efficiency of wind integration and evaluate the economics of storage technologies and conventional gas-fired alternatives. The proposed method is used to carry out a cost-benefit analysis for the IEEE 24-bus system and determine the most economical technology. In order to mitigate the financial and technical concerns of renewable energy integration into the power system, a stochastic framework is proposed for transmission grid reinforcement studies in a power system with wind generation. A multi-stage multi-objective transmission network expansion planning (TNEP) methodology is developed which considers the investment cost, absorption of private investment and reliability of the system as the objective functions. A Non-dominated Sorting Genetic Algorithm (NSGA II) optimization approach is used in combination with a probabilistic optimal power flow (POPF) to determine the Pareto optimal solutions considering the power system uncertainties. Using a compromise-solution method, the best final plan is then realized based on the decision maker preferences. The proposed methodology is applied to the IEEE 24-bus Reliability Tests System (RTS) to evaluate the feasibility and practicality of the developed planning strategy.

Summary of the Sixth Persh Workshop: Corrosion Policy Guiding Science and Technology

DTIC Science & Technology

2016-01-01

mitigating corrosion. Corrosion affects military readiness, so corrosion prevention and control (CPC) have a high priority for the DOD since CPC is a...resulting in high -cost repairs. Corrosion mitigation is thus a key cost-effective approach for system maintainability and reduced life cycle costs. The... treatments . • Develop corrosion databases and corrosion models for predictive evaluation. Testing methods for realistic prediction of performance

Cost Effectiveness of Contraceptives in the United States

PubMed Central

Trussell, James; Lalla, Anjana M.; Doan, Quan V.; Reyes, Eileen; Pinto, Lionel; Gricar, Joseph

2013-01-01

Background The study was conducted to estimate the relative cost effectiveness of contraceptives in the United States from a payer’s perspective. Methods A Markov model was constructed to simulate costs for 16 contraceptive methods and no method over a 5-year period. Failure rates, adverse event rates, and resource utilization were derived from the literature. Sensitivity analyses were performed on costs and failure rates. Results Any contraceptive method is superior to “no method”. The three least expensive methods were the copper-T IUD ($647), vasectomy ($713) and LNG-20 IUS ($930). Results were sensitive to the cost of contraceptive methods, the cost of an unintended pregnancy, and plan disenrollment rates. Conclusion The copper-T IUD, vasectomy, and the LNG-20 IUS are the most cost-effective contraceptive methods available in the United States. Differences in method costs, the cost of an unintended pregnancy, and time horizon are influential factors that determine the overall value of a contraceptive method. PMID:19041435

Cost estimating methods for advanced space systems

NASA Technical Reports Server (NTRS)

Cyr, Kelley

1988-01-01

Parametric cost estimating methods for space systems in the conceptual design phase are developed. The approach is to identify variables that drive cost such as weight, quantity, development culture, design inheritance, and time. The relationship between weight and cost is examined in detail. A theoretical model of cost is developed and tested statistically against a historical data base of major research and development programs. It is concluded that the technique presented is sound, but that it must be refined in order to produce acceptable cost estimates.

THE APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON SEQUESTRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2002-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research projects is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Tolerance assignment in optical design

NASA Astrophysics Data System (ADS)

Youngworth, Richard Neil

2002-09-01

Tolerance assignment is necessary in any engineering endeavor because fabricated systems---due to the stochastic nature of manufacturing and assembly processes---necessarily deviate from the nominal design. This thesis addresses the problem of optical tolerancing. The work can logically be split into three different components that all play an essential role. The first part addresses the modeling of manufacturing errors in contemporary fabrication and assembly methods. The second component is derived from the design aspect---the development of a cost-based tolerancing procedure. The third part addresses the modeling of image quality in an efficient manner that is conducive to the tolerance assignment process. The purpose of the first component, modeling manufacturing errors, is twofold---to determine the most critical tolerancing parameters and to understand better the effects of fabrication errors. Specifically, mid-spatial-frequency errors, typically introduced in sub-aperture grinding and polishing fabrication processes, are modeled. The implication is that improving process control and understanding better the effects of the errors makes the task of tolerance assignment more manageable. Conventional tolerancing methods do not directly incorporate cost. Consequently, tolerancing approaches tend to focus more on image quality. The goal of the second part of the thesis is to develop cost-based tolerancing procedures that facilitate optimum system fabrication by generating the loosest acceptable tolerances. This work has the potential to impact a wide range of optical designs. The third element, efficient modeling of image quality, is directly related to the cost-based optical tolerancing method. Cost-based tolerancing requires efficient and accurate modeling of the effects of errors on the performance of optical systems. Thus it is important to be able to compute the gradient and the Hessian, with respect to the parameters that need to be toleranced, of the figure of merit that measures the image quality of a system. An algebraic method for computing the gradient and the Hessian is developed using perturbation theory.

Cost-Effectiveness of Three Rounds of Mammography Breast Cancer Screening in Iranian Women

PubMed Central

Haghighat, Shahpar; Akbari, Mohammad Esmaeil; Yavari, Parvin; Javanbakht, Mehdi; Ghaffari, Shahram

2016-01-01

Background Breast cancer is the most common cancer in Iranian women as is worldwide. Mammography screening has been introduced as a beneficial method for reducing mortality and morbidity of this disease. Objectives We developed an analytical model to assess the cost effectiveness of an organized mammography screening program in Iran for early detection of the breast cancer. Patients and Methods This study is an economic evaluation of mammography screening program among Iranian woman aged 40 - 70 years. A decision tree and Markov model were applied to estimate total quality adjusted life years (QALY) and lifetime costs. Results The results revealed that the incremental cost effectiveness ratio (ICER) of mammography screening in Iranian women in the first round was Int. $ 37,350 per QALY gained. The model showed that the ICER in the second and third rounds of screening program were Int. $ 141,641 and Int. $ 389,148 respectively. Conclusions Study results identified that mammography screening program was cost-effective in 53% of the cases, but incremental cost per QALY in the second and third rounds of screening are much higher than the accepted payment threshold of Iranian health system. Thus, evaluation of other screening strategies would be useful to identify more cost-effective program. Future studies with new national data can improve the accuracy of our finding and provide better information for health policy makers for decision making. PMID:27366315

Cost-effectiveness of introducing a rotavirus vaccine in developing countries: The case of Mexico

PubMed Central

Valencia-Mendoza, Atanacio; Bertozzi, Stefano M; Gutierrez, Juan-Pablo; Itzler, Robbin

2008-01-01

Background In developing countries rotavirus is the leading cause of severe diarrhoea and diarrhoeal deaths in children under 5. Vaccination could greatly alleviate that burden, but in Mexico as in most low- and middle-income countries the decision to add rotavirus vaccine to the national immunisation program will depend heavily on its cost-effectiveness and affordability. The objective of this study was to assess the cost-effectiveness of including the pentavalent rotavirus vaccine in Mexico's national immunisation program. Methods A cost-effectiveness model was developed from the perspective of the health system, modelling the vaccination of a hypothetical birth cohort of 2 million children monitored from birth through 60 months of age. It compares the cost and disease burden of rotavirus in an unvaccinated cohort of children with one vaccinated as recommended at 2, 4, and 6 months. Results Including the pentavalent vaccine in the national immunisation program could prevent 71,464 medical visits (59%), 5,040 hospital admissions (66%), and 612 deaths from rotavirus gastroenteritis (70%). At US$10 per dose and a cost of administration of US$13.70 per 3-dose regimen, vaccination would cost US$122,058 per death prevented, US$4,383 per discounted life-year saved, at a total net cost of US$74.7 million dollars to the health care system. Key variables influencing the results were, in order of importance, case fatality, vaccine price, vaccine efficacy, serotype prevalence, and annual loss of efficacy. The results are also very sensitive to the discount rate assumed when calculated per life-year saved. Conclusion At prices below US $15 per dose, the cost per life-year saved is estimated to be lower than one GNP per capita and hence highly cost effective by the WHO Commission on Macroeconomics and Health criteria. The cost-effectiveness estimates are highly dependent upon the mortality in the absence of the vaccine, which suggests that the vaccine is likely to be significantly more cost-effective among poorer populations and among those with less access to prompt medical care – such that poverty reduction programs would be expected to reduce the future cost-effectiveness of the vaccine. PMID:18664280

Risk Costs for New Dams: Economic Analysis and Effects of Monitoring

NASA Astrophysics Data System (ADS)

Paté-Cornell, M. Elisabeth; Tagaras, George

1986-01-01

This paper presents new developments and illustrations of the introduction of risk and costs in cost-benefit analysis for new dams. The emphasis is on a method of evaluation of the risk costs based on the structure of the local economy. Costs to agricultural property as well as residential, commercial, industrial, and public property are studied in detail. Of particular interest is the case of sequential dam failure and the evaluation of the risk costs attributable to a new dam upstream from an existing one. Three real cases are presented as illustrations of the method: the Auburn Dam, the Dickey-Lincoln School Project, and the Teton Dam, which failed in 1976. This last case provides a calibration tool for the estimation of loss ratios. For these three projects, the risk-modified benefit-cost ratios are computed to assess the effect of the risk on the economic performance of the project. The role of a warning system provided by systematic monitoring of the dam is analyzed: by reducing the risk costs, the warning system attenuates their effect on the benefit-cost ratio. The precursors, however, can be missed or misinterpreted: monitoring does not guarantee that the risks to human life can be reduced to zero. This study shows, in particular, that it is critical to consider the risk costs in the decision to build a new dam when the flood area is large and densely populated.

Cost-Effectiveness Analysis of Regorafenib for Metastatic Colorectal Cancer

PubMed Central

Goldstein, Daniel A.; Ahmad, Bilal B.; Chen, Qiushi; Ayer, Turgay; Howard, David H.; Lipscomb, Joseph; El-Rayes, Bassel F.; Flowers, Christopher R.

2015-01-01

Purpose Regorafenib is a standard-care option for treatment-refractory metastatic colorectal cancer that increases median overall survival by 6 weeks compared with placebo. Given this small incremental clinical benefit, we evaluated the cost-effectiveness of regorafenib in the third-line setting for patients with metastatic colorectal cancer from the US payer perspective. Methods We developed a Markov model to compare the cost and effectiveness of regorafenib with those of placebo in the third-line treatment of metastatic colorectal cancer. Health outcomes were measured in life-years and quality-adjusted life-years (QALYs). Drug costs were based on Medicare reimbursement rates in 2014. Model robustness was addressed in univariable and probabilistic sensitivity analyses. Results Regorafenib provided an additional 0.04 QALYs (0.13 life-years) at a cost of $40,000, resulting in an incremental cost-effectiveness ratio of $900,000 per QALY. The incremental cost-effectiveness ratio for regorafenib was > $550,000 per QALY in all of our univariable and probabilistic sensitivity analyses. Conclusion Regorafenib provides minimal incremental benefit at high incremental cost per QALY in the third-line management of metastatic colorectal cancer. The cost-effectiveness of regorafenib could be improved by the use of value-based pricing. PMID:26304904

Cost-effectiveness of health-related lifestyle advice delivered by peer or lay advisors: synthesis of evidence from a systematic review

PubMed Central

2013-01-01

Background Development of new peer or lay health-related lifestyle advisor (HRLA) roles is one response to the need to enhance public engagement in, and improve cost-effectiveness of, health improvement interventions. This article synthesises evidence on the cost-effectiveness of HRLA interventions aimed at adults in developed countries, derived from the first systematic review of the effectiveness, cost-effectiveness, equity and acceptability of different types of HRLA role. Methods The best available evidence on the cost-effectiveness of HRLA interventions was obtained using systematic searches of 20 electronic databases and key journals, as well as searches of the grey literature and the internet. Interventions were classified according to the primary health behaviour targeted and intervention costs were estimated where necessary. Lifetime health gains were estimated (in quality-adjusted life years, where possible), based on evidence of effectiveness of HRLAs in combination with published estimates of the lifetime health gains resulting from lifestyle changes, and assumptions over relapse. Incremental cost-effectiveness ratios are reported. Results Evidence of the cost-effectiveness of HRLAs was identified from 24 trials included in the systematic review. The interventions were grouped into eight areas. We found little evidence of effectiveness of HRLAs for promotion of exercise/improved diets. Where HRLAs were effective cost-effectiveness varied considerably: Incremental Cost effectiveness Ratios were estimated at £6,000 for smoking cessation; £14,000 for a telephone based type 2 diabetes management; and £250,000 or greater for promotion of mammography attendance and for HIV prevention amongst drug users. We lacked sufficient evidence to estimate ICERs for breastfeeding promotion and mental health promotion, or to assess the impact of HRLAs on health inequalities. Conclusions Overall, there is limited evidence suggesting that HRLAs are cost-effective in terms of changing health-related knowledge, behaviours or health outcomes. The evidence that does exist indicates that HRLAs are only cost-effective when they target behaviours likely to have a large impact on overall health-related quality of life. Further development of HRLA interventions needs to target specific population health needs where potential exists for significant improvement, and include rigorous evaluation to ensure that HRLAs provide sufficient value for money. PMID:24304826

Arsenic Treatment Technology Demonstrations

EPA Pesticide Factsheets

EPA’s research for the new Arsenic Rule focused on the development and evaluation of innovative methods and cost-effective technologies for improving the assessment and control of arsenic contamination.

[Methods of investigation in clinical cardiology. VIII. Socioeconomic evaluation of clinical cardiology practice].

PubMed

Lázaro de Mercado, P

1997-06-01

Health services are systems whose mission is to improve the health status of both individuals and society in general. In recent decades, these systems have faced challenges such as their increasing complexity, limited resources, rapid innovation and diffusion of medical technologies, pressures on demand from society and professionals, and the lack of knowledge of the effects of these factors on costs and society's health. In addition, health care expenditures have grown twice as fast as wealth in industrialized countries during the last 25 years. These problems have prompted cost containment as a key issue in health policy and, at the same time, have promoted the development of socioeconomic evaluation as a scientific activity in the frame of health services research. Socioeconomic evaluation tries to determine if the sacrifice made by society, which devotes part of its limited resources to health care, maximizes the outcomes for population. This article describes basic concepts and methods of economic appraisal in health services which are illustrated with examples of clinical practice in cardiology. Common methods of evaluation are described; the relation between the clinical outcome of a procedure and its associated costs is emphasized in explaining the types of efficiency analysis (cost-efficacy, cost-effectiveness, cost-utility, and cost-benefit); and finally a guide for socioeconomic evaluation is provided.

Manufacturing Cost Levelization Model – A User’s Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, William R.; Shehabi, Arman; Smith, Sarah Josephine

The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modulesmore » that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks that offer the greatest opportunities for cost reduction early in the research and development stages of technology invention.« less

Cost-effectiveness Analysis for Technology Acquisition.

PubMed

Chakravarty, A; Naware, S S

2008-01-01

In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.

Fault tolerant testbed evaluation, phase 1

NASA Technical Reports Server (NTRS)

Caluori, V., Jr.; Newberry, T.

1993-01-01

In recent years, avionics systems development costs have become the driving factor in the development of space systems, military aircraft, and commercial aircraft. A method of reducing avionics development costs is to utilize state-of-the-art software application generator (autocode) tools and methods. The recent maturity of application generator technology has the potential to dramatically reduce development costs by eliminating software development steps that have historically introduced errors and the need for re-work. Application generator tools have been demonstrated to be an effective method for autocoding non-redundant, relatively low-rate input/output (I/O) applications on the Space Station Freedom (SSF) program; however, they have not been demonstrated for fault tolerant, high-rate I/O, flight critical environments. This contract will evaluate the use of application generators in these harsh environments. Using Boeing's quad-redundant avionics system controller as the target system, Space Shuttle Guidance, Navigation, and Control (GN&C) software will be autocoded, tested, and evaluated in the Johnson (Space Center) Avionics Engineering Laboratory (JAEL). The response of the autocoded system will be shown to match the response of the existing Shuttle General Purpose Computers (GPC's), thereby demonstrating the viability of using autocode techniques in the development of future avionics systems.

Cost-effectiveness acceptability curves revisited.

PubMed

Al, Maiwenn J

2013-02-01

Since the introduction of the cost-effectiveness acceptability curve (CEAC) in 1994, its use as a method to describe uncertainty around incremental cost-effectiveness ratios (ICERs) has steadily increased. In this paper, first the construction and interpretation of the CEAC is explained, both in the context of modelling studies and in the context of cost-effectiveness (CE) studies alongside clinical trials. Additionally, this paper reviews the advantages and limitations of the CEAC. Many of the perceived limitations can be attributed to the practice of interpreting the CEAC as a decision rule while it was not developed as such. It is argued that the CEAC is still a useful tool in describing and quantifying uncertainty around the ICER, especially in combination with other tools such as plots on the CE plane and value-of-information analysis.

Technical Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Zoe Kant

2009-01-07

The Nature Conservancy participated in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project was 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration'. The objectives of the project were to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providingmore » new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Final Technical Report discusses the results of the six tasks that The Nature Conservancy undertook to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between July 1st 2001 and July 10th 2008. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. The project occurred in two phases. The first was a focused exploration of specific carbon measurement and monitoring methodologies and pre-selected carbon sequestration opportunities. The second was a more systematic and comprehensive approach to compare various competing measurement and monitoring methodologies, and assessment of a variety of carbon sequestration opportunities in order to find those that are the lowest cost with the greatest combined carbon and other environmental benefits. In the first phase we worked in the U.S., Brazil, Belize, Bolivia, Peru, and Chile to develop and refine specific carbon inventory methods, pioneering a new remote-sensing method for cost-effectively measuring and monitoring terrestrial carbon sequestration and system for developing carbon baselines for both avoided deforestation and afforestation/reforestation projects. We evaluated the costs and carbon benefits of a number of specific terrestrial carbon sequestration activities throughout the U.S., including reforestation of abandoned mined lands in southwest Virginia, grassland restoration in Arizona and Indiana, and reforestation in the Mississippi Alluvial Delta. The most cost-effective U.S. terrestrial sequestration opportunity we found through these studies was reforestation in the Mississippi Alluvial Delta. In Phase II we conducted a more systematic assessment and comparison of several different measurement and monitoring approaches in the Northern Cascades of California, and a broad 11-state Northeast regional assessment, rather than pre-selected and targeted, analysis of terrestrial sequestration costs and benefits. Work was carried out in Brazil, Belize, Chile, Peru and the USA. Partners include the Winrock International Institute for Agricultural Development, The Sampson Group, Programme for Belize, Society for Wildlife Conservation (SPVS), Universidad Austral de Chile, Michael Lefsky, Colorado State University, UC Berkeley, the Carnegie Institution of Washington, ProNaturaleza, Ohio State University, Stephen F. Austin University, Geographical Modeling Services, Inc., WestWater, Los Alamos National Laboratory, Century Ecosystem Services, Mirant Corporation, General Motors, American Electric Power, Salt River Project, Applied Energy Systems, KeySpan, NiSource, and PSEG. This project, 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration', has resulted in over 50 presentations and reports, available publicly through the Department of Energy or by visiting the links listed in Appendix 1. More important than the reports, the project has helped to lead to the development of on-the-ground projects in Southwestern Virginia, Louisiana, and Chile while informing policy development in Virginia, the Regional Greenhouse Gas Initiative, the California Climate Action Registry and U.S. and international programs.« less

Urban Land Cover Mapping Accuracy Assessment - A Cost-benefit Analysis Approach

NASA Astrophysics Data System (ADS)

Xiao, T.

2012-12-01

One of the most important components in urban land cover mapping is mapping accuracy assessment. Many statistical models have been developed to help design simple schemes based on both accuracy and confidence levels. It is intuitive that an increased number of samples increases the accuracy as well as the cost of an assessment. Understanding cost and sampling size is crucial in implementing efficient and effective of field data collection. Few studies have included a cost calculation component as part of the assessment. In this study, a cost-benefit sampling analysis model was created by combining sample size design and sampling cost calculation. The sampling cost included transportation cost, field data collection cost, and laboratory data analysis cost. Simple Random Sampling (SRS) and Modified Systematic Sampling (MSS) methods were used to design sample locations and to extract land cover data in ArcGIS. High resolution land cover data layers of Denver, CO and Sacramento, CA, street networks, and parcel GIS data layers were used in this study to test and verify the model. The relationship between the cost and accuracy was used to determine the effectiveness of each sample method. The results of this study can be applied to other environmental studies that require spatial sampling.

Fertility Regulation in an Economic Crisis

PubMed Central

McKelvey, Christopher; Thomas, Duncan; Frankenberg, Elizabeth

2015-01-01

Substantial international aid is spent reducing the cost of contraception in developing countries, as part of a larger effort to reduce global fertility and increase investment per child worldwide. The importance for fertility behaviors of keeping contraceptive prices low, however, remains unclear. Targeting of subsidies and insufficient price variation have hindered prior attempts to estimate the effect of monetary and non-monetary contraceptive costs on fertility behavior. Using longitudinal survey data from the Indonesia Family Life Survey, we exploit dramatic variation in prices and incomes that was induced by the economic crisis in the late 1990s to pin down the effect of contraceptive availability and costs as well as household resources on contraceptive use and method choice. The results are unambiguous: monetary costs of contraceptives and levels of family economic resources have a very small (and well-determined) impact on contraceptive use and choice of method. PMID:25843969

A Common Programming Language for the Department of Defense--Background and Technical Requirements

DTIC Science & Technology

1976-06-01

Method Findings I. Introduction A. The Problem 1. Software Costs 2. Programming Language 3. Lack of Comrr.onality 4. Common Language 5...accessible soft- ware tools and aids. There are a number of widely held perceptions about the ill effects of the lack of programming language ...cost- effective (at lea~t during development) than de- velopi~g a new programming language specialized to the project. On the other hand,

The Cost-Effectiveness of Monitoring Strategies for Antiretroviral Therapy of HIV Infected Patients in Resource-Limited Settings: Software Tool

PubMed Central

Estill, Janne; Salazar-Vizcaya, Luisa; Blaser, Nello; Egger, Matthias; Keiser, Olivia

2015-01-01

Background The cost-effectiveness of routine viral load (VL) monitoring of HIV-infected patients on antiretroviral therapy (ART) depends on various factors that differ between settings and across time. Low-cost point-of-care (POC) tests for VL are in development and may make routine VL monitoring affordable in resource-limited settings. We developed a software tool to study the cost-effectiveness of switching to second-line ART with different monitoring strategies, and focused on POC-VL monitoring. Methods We used a mathematical model to simulate cohorts of patients from start of ART until death. We modeled 13 strategies (no 2nd-line, clinical, CD4 (with or without targeted VL), POC-VL, and laboratory-based VL monitoring, with different frequencies). We included a scenario with identical failure rates across strategies, and one in which routine VL monitoring reduces the risk of failure. We compared lifetime costs and averted disability-adjusted life-years (DALYs). We calculated incremental cost-effectiveness ratios (ICER). We developed an Excel tool to update the results of the model for varying unit costs and cohort characteristics, and conducted several sensitivity analyses varying the input costs. Results Introducing 2nd-line ART had an ICER of US$1651-1766/DALY averted. Compared with clinical monitoring, the ICER of CD4 monitoring was US$1896-US$5488/DALY averted and VL monitoring US$951-US$5813/DALY averted. We found no difference between POC- and laboratory-based VL monitoring, except for the highest measurement frequency (every 6 months), where laboratory-based testing was more effective. Targeted VL monitoring was on the cost-effectiveness frontier only if the difference between 1st- and 2nd-line costs remained large, and if we assumed that routine VL monitoring does not prevent failure. Conclusion Compared with the less expensive strategies, the cost-effectiveness of routine VL monitoring essentially depends on the cost of 2nd-line ART. Our Excel tool is useful for determining optimal monitoring strategies for specific settings, with specific sex-and age-distributions and unit costs. PMID:25793531

Pros, Cons, and Alternatives to Weight Based Cost Estimating

NASA Technical Reports Server (NTRS)

Joyner, Claude R.; Lauriem, Jonathan R.; Levack, Daniel H.; Zapata, Edgar

2011-01-01

Many cost estimating tools use weight as a major parameter in projecting the cost. This is often combined with modifying factors such as complexity, technical maturity of design, environment of operation, etc. to increase the fidelity of the estimate. For a set of conceptual designs, all meeting the same requirements, increased weight can be a major driver in increased cost. However, once a design is fixed, increased weight generally decreases cost, while decreased weight generally increases cost - and the relationship is not linear. Alternative approaches to estimating cost without using weight (except perhaps for materials costs) have been attempted to try to produce a tool usable throughout the design process - from concept studies through development. This paper will address the pros and cons of using weight based models for cost estimating, using liquid rocket engines as the example. It will then examine approaches that minimize the impct of weight based cost estimating. The Rocket Engine- Cost Model (RECM) is an attribute based model developed internally by Pratt & Whitney Rocketdyne for NASA. RECM will be presented primarily to show a successful method to use design and programmatic parameters instead of weight to estimate both design and development costs and production costs. An operations model developed by KSC, the Launch and Landing Effects Ground Operations model (LLEGO), will also be discussed.

DEVELOPING SITE-SPECIFIC MODELS FOR FORECASTING BACTERIA LEVELS AT COASTAL BEACHES

EPA Science Inventory

The U.S.Beaches Environmental Assessment and Coastal Health Act of 2000 authorizes studies of pathogen indicators in coastal recreation waters that develop appropriate, accurate, expeditious, and cost-effective methods (including predictive models) for quantifying pathogens in co...

Cost-estimating relationships for space programs

NASA Technical Reports Server (NTRS)

Mandell, Humboldt C., Jr.

1992-01-01

Cost-estimating relationships (CERs) are defined and discussed as they relate to the estimation of theoretical costs for space programs. The paper primarily addresses CERs based on analogous relationships between physical and performance parameters to estimate future costs. Analytical estimation principles are reviewed examining the sources of errors in cost models, and the use of CERs is shown to be affected by organizational culture. Two paradigms for cost estimation are set forth: (1) the Rand paradigm for single-culture single-system methods; and (2) the Price paradigms that incorporate a set of cultural variables. For space programs that are potentially subject to even small cultural changes, the Price paradigms are argued to be more effective. The derivation and use of accurate CERs is important for developing effective cost models to analyze the potential of a given space program.

Mind the Gap! A Multilevel Analysis of Factors Related to Variation in Published Cost-Effectiveness Estimates within and between Countries

PubMed Central

Boehler, Christian E. H.; Lord, Joanne

2016-01-01

Background. Published cost-effectiveness estimates can vary considerably, both within and between countries. Despite extensive discussion, little is known empirically about factors relating to these variations. Objectives. To use multilevel statistical modeling to integrate cost-effectiveness estimates from published economic evaluations to investigate potential causes of variation. Methods. Cost-effectiveness studies of statins for cardiovascular disease prevention were identified by systematic review. Estimates of incremental costs and effects were extracted from reported base case, sensitivity, and subgroup analyses, with estimates grouped in studies and in countries. Three bivariate models were developed: a cross-classified model to accommodate data from multinational studies, a hierarchical model with multinational data allocated to a single category at country level, and a hierarchical model excluding multinational data. Covariates at different levels were drawn from a long list of factors suggested in the literature. Results. We found 67 studies reporting 2094 cost-effectiveness estimates relating to 23 countries (6 studies reporting for more than 1 country). Data and study-level covariates included patient characteristics, intervention and comparator cost, and some study methods (e.g., discount rates and time horizon). After adjusting for these factors, the proportion of variation attributable to countries was negligible in the cross-classified model but moderate in the hierarchical models (14%−19% of total variance). Country-level variables that improved the fit of the hierarchical models included measures of income and health care finance, health care resources, and population risks. Conclusions. Our analysis suggested that variability in published cost-effectiveness estimates is related more to differences in study methods than to differences in national context. Multinational studies were associated with much lower country-level variation than single-country studies. These findings are for a single clinical question and may be atypical. PMID:25878194

The influence of various test plans on mission reliability. [for Shuttle Spacelab payloads

NASA Technical Reports Server (NTRS)

Stahle, C. V.; Gongloff, H. R.; Young, J. P.; Keegan, W. B.

1977-01-01

Methods have been developed for the evaluation of cost effective vibroacoustic test plans for Shuttle Spacelab payloads. The shock and vibration environments of components have been statistically represented, and statistical decision theory has been used to evaluate the cost effectiveness of five basic test plans with structural test options for two of the plans. Component, subassembly, and payload testing have been performed for each plan along with calculations of optimum test levels and expected costs. The tests have been ranked according to both minimizing expected project costs and vibroacoustic reliability. It was found that optimum costs may vary up to $6 million with the lowest plan eliminating component testing and maintaining flight vibration reliability via subassembly tests at high acoustic levels.

Integrating health economics into the product development cycle: a case study of absorbable pins for treating hallux valgus.

PubMed

Vallejo-Torres, Laura; Steuten, Lotte; Parkinson, Bonny; Girling, Alan J; Buxton, Martin J

2011-01-01

The probability of reimbursement is a key factor in determining whether to proceed with or abandon a product during its development. The purpose of this article is to illustrate how the methods of iterative Bayesian economic evaluation proposed in the literature can be incorporated into the development process of new medical devices, adapting them to face the relative scarcity of data and time that characterizes the process. A 3-stage economic evaluation was applied: an early phase in which simple methods allow for a quick prioritization of competing products; a mid-stage in which developers synthesize the data into a decision model, identify the parameters for which more information is most valuable, and explore uncertainty; and a late stage, in which all relevant information is synthesized. A retrospective analysis was conducted of the case study of absorbable pins, compared with metallic fixation, in osteotomy to treat hallux valgus. The results from the early analysis suggest absorbable pins to be cost-effective under the beliefs and assumptions applied. The outputs from the models at the mid-stage analyses show the device to be cost-effective with a high probability. Late-stage analysis synthesizes evidence from a randomized controlled trial and informative priors, which are based on previous evidence. It also suggests that absorbable pins are the most cost-effective strategy, although the uncertainty in the model output increased considerably. This example illustrates how the method proposed allows decisions in the product development cycle to be based on the best knowledge that is available at each stage.

Principles and methods of managerial cost-accounting systems.

PubMed

Suver, J D; Cooper, J C

1988-01-01

An introduction to cost-accounting systems for pharmacy managers is provided; terms are defined and examples of specific applications are given. Cost-accounting systems determine, record, and report the resources consumed in providing services. An effective cost-accounting system must provide the information needed for both internal and external reports. In accounting terms, cost is the value given up to secure an asset. In determining how volumes of activity affect costs, fixed costs and variable costs are calculated; applications include pricing strategies, cost determinations, and break-even analysis. Also discussed are the concepts of direct and indirect costs, opportunity costs, and incremental and sunk costs. For most pharmacy department services, process costing, an accounting of intermediate outputs and homogeneous units, is used; in determining the full cost of providing a product or service (e.g., patient stay), job-order costing is used. Development of work-performance standards is necessary for monitoring productivity and determining product costs. In allocating pharmacy department costs, a ratio of costs to charges can be used; this method is convenient, but microcosting (specific identification of the costs of products) is more accurate. Pharmacy managers can use cost-accounting systems to evaluate the pharmacy's strategies, policies, and services and to improve budgets and reports.

[Threshold value for reimbursement of costs of new drugs: cost-effectiveness research and modelling are essential links].

PubMed

Frederix, Geert W J; Hövels, Anke M; Severens, Johan L; Raaijmakers, Jan A M; Schellens, Jan H M

2015-01-01

There is increasing discussion in the Netherlands about the introduction of a threshold value for the costs per extra year of life when reimbursing costs of new drugs. The Medicines Committee ('Commissie Geneesmiddelen'), a division of the Netherlands National Healthcare Institute ('Zorginstituut Nederland'), advises on reimbursement of costs of new drugs. This advice is based upon the determination of therapeutic value of the drug and the results of economic evaluations. Mathematical models that predict future costs and effectiveness are often used in economic evaluations; these models can vary greatly in transparency and quality due to author assumptions. Standardisation of cost-effectiveness models is one solution to overcome the unwanted variation in quality. Discussions about the introduction of a threshold value can only be meaningful if all involved are adequately informed, and by high quality in cost-effectiveness research and, particularly, economic evaluations. Collaboration and discussion between medical specialists, patients or patient organisations, health economists and policy makers, both in development of methods and in standardisation, are essential to improve the quality of decision making.

Which method is best for the induction of labour? A systematic review, network meta-analysis and cost-effectiveness analysis.

PubMed

Alfirevic, Zarko; Keeney, Edna; Dowswell, Therese; Welton, Nicky J; Medley, Nancy; Dias, Sofia; Jones, Leanne V; Gyte, Gillian; Caldwell, Deborah M

2016-08-01

More than 150,000 pregnant women in England and Wales have their labour induced each year. Multiple pharmacological, mechanical and complementary methods are available to induce labour. To assess the relative effectiveness, safety and cost-effectiveness of labour induction methods and, data permitting, effects in different clinical subgroups. We carried out a systematic review using Cochrane methods. The Cochrane Pregnancy and Childbirth Group's Trials Register was searched (March 2014). This contains over 22,000 reports of controlled trials (published from 1923 onwards) retrieved from weekly searches of OVID MEDLINE (1966 to current); Cochrane Central Register of Controlled Trials (The Cochrane Library); EMBASE (1982 to current); Cumulative Index to Nursing and Allied Health Literature (1984 to current); ClinicalTrials.gov; the World Health Organization International Clinical Trials Registry Portal; and hand-searching of relevant conference proceedings and journals. We included randomised controlled trials examining interventions to induce labour compared with placebo, no treatment or other interventions in women eligible for third-trimester induction. We included outcomes relating to efficacy, safety and acceptability to women. In addition, for the economic analysis we searched the Database of Abstracts of Reviews of Effects, and Economic Evaluations Databases, NHS Economic Evaluation Database and the Health Technology Assessment database. We carried out a network meta-analysis (NMA) using all of the available evidence, both direct and indirect, to produce estimates of the relative effects of each treatment compared with others in a network. We developed a de novo decision tree model to estimate the cost-effectiveness of various methods. The costs included were the intervention and other hospital costs incurred (price year 2012-13). We reviewed the literature to identify preference-based utilities for the health-related outcomes in the model. We calculated incremental cost-effectiveness ratios, expected costs, utilities and net benefit. We represent uncertainty in the optimal intervention using cost-effectiveness acceptability curves. We identified 1190 studies; 611 were eligible for inclusion. The interventions most likely to achieve vaginal delivery (VD) within 24 hours were intravenous oxytocin with amniotomy [posterior rank 2; 95% credible intervals (CrIs) 1 to 9] and higher-dose (≥ 50 µg) vaginal misoprostol (rank 3; 95% CrI 1 to 6). Compared with placebo, several treatments reduced the odds of caesarean section, but we observed considerable uncertainty in treatment rankings. For uterine hyperstimulation, double-balloon catheter had the highest probability of being among the best three treatments, whereas vaginal misoprostol (≥ 50 µg) was most likely to increase the odds of excessive uterine activity. For other safety outcomes there were insufficient data or there was too much uncertainty to identify which treatments performed 'best'. Few studies collected information on women's views. Owing to incomplete reporting of the VD within 24 hours outcome, the cost-effectiveness analysis could compare only 20 interventions. The analysis suggested that most interventions have similar utility and differ mainly in cost. With a caveat of considerable uncertainty, titrated (low-dose) misoprostol solution and buccal/sublingual misoprostol had the highest likelihood of being cost-effective. There was considerable uncertainty in findings and there were insufficient data for some planned subgroup analyses. Overall, misoprostol and oxytocin with amniotomy (for women with favourable cervix) is more successful than other agents in achieving VD within 24 hours. The ranking according to safety of different methods was less clear. The cost-effectiveness analysis suggested that titrated (low-dose) oral misoprostol solution resulted in the highest utility, whereas buccal/sublingual misoprostol had the lowest cost. There was a high degree of uncertainty as to the most cost-effective intervention. Future trials should be powered to detect a method that is more cost-effective than misoprostol solution and report outcomes included in this NMA. This study is registered as PROSPERO CRD42013005116. The National Institute for Health Research Health Technology Assessment programme.

Uncertainty-based Optimization Algorithms in Designing Fractionated Spacecraft

PubMed Central

Ning, Xin; Yuan, Jianping; Yue, Xiaokui

2016-01-01

A fractionated spacecraft is an innovative application of a distributive space system. To fully understand the impact of various uncertainties on its development, launch and in-orbit operation, we use the stochastic missioncycle cost to comprehensively evaluate the survivability, flexibility, reliability and economy of the ways of dividing the various modules of the different configurations of fractionated spacecraft. We systematically describe its concept and then analyze its evaluation and optimal design method that exists during recent years and propose the stochastic missioncycle cost for comprehensive evaluation. We also establish the models of the costs such as module development, launch and deployment and the impacts of their uncertainties respectively. Finally, we carry out the Monte Carlo simulation of the complete missioncycle costs of various configurations of the fractionated spacecraft under various uncertainties and give and compare the probability density distribution and statistical characteristics of its stochastic missioncycle cost, using the two strategies of timing module replacement and non-timing module replacement. The simulation results verify the effectiveness of the comprehensive evaluation method and show that our evaluation method can comprehensively evaluate the adaptability of the fractionated spacecraft under different technical and mission conditions. PMID:26964755

The Array Automated Assembly Task for the Low Cost Solar Array Project, Phase 2

NASA Technical Reports Server (NTRS)

Campbell, R. B. (Editor); Farukhi, S. (Editor)

1978-01-01

During the program a process sequence was proposed and tested for the fabrication of dendritic welb silicon into solar modules. This sequence was analyzed as to yield and cost and these data suggest that the price goals of 1986 are attainable. Specifically, it was shown that a low cost POCL3 is a suitable replacement for the semiconductor grade, and that a suitable CVD oxide can be deposited from a silane/air mixture using a Silox reactor. A dip coating method was developed for depositing an antireflection coating from a metalorganic precursor. Application of photoresist to define contact grids was made cost effective through use of a dip coating technique. Electroplating of both Ag and Cu was shown feasible and cost effective for producing the conductive metal grids on the solar cells. Laser scribing was used to separate the cells from the dendrites without degradation. Ultrasonic welding methods were shown to be feasible for interconnecting the cells. A study of suitable low cost materials for encapsulation suggest that soda lime glass and phenolic filled board are preferred.

An Evaluation of Clinical Economics and Cases of Cost-effectiveness

PubMed Central

Takura, Tomoyuki

2017-01-01

In order to maintain and develop a universal health insurance system, it is crucial to utilize limited medical resources effectively. In this context, considerations are underway to introduce health technology assessments (HTAs), such as cost-effectiveness analyses (CEAs), into the medical treatment fee system. CEAs, which is the general term for these methods, are classified into four categories, such as cost-effectiveness analyses based on performance indicators, and in the comparison of health technologies, the incremental cost-effectiveness ratio (ICER) is also applied. When I comprehensively consider several Japanese studies based on these concepts, I find that, in the results of the analysis of the economic performance of healthcare systems, Japan shows the most promising trend in the world. In addition, there is research indicating the superior cost-effectiveness of Rituximab against refractory nephrotic syndrome, and it is expected that health economics will be actively applied to the valuation of technical innovations such as drug discovery. PMID:29279514

Developing Knowledge Intensive Ideas in Engineering Education: The Application of Camp Methodology

ERIC Educational Resources Information Center

Lassen, Astrid Heidemann; Nielsen, Suna Lowe

2011-01-01

Background: Globalization, technological advancement, environmental problems, etc. challenge organizations not just to consider cost-effectiveness, but also to develop new ideas in order to build competitive advantages. Hence, methods to deliberately enhance creativity and facilitate its processes of development must also play a central role in…

Merged GIS, GPS data assist siting for gulf gas line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott, D.R.; Schmidt, J.A.

1998-06-29

A GIS-based decision-support system was developed for a US Gulf of Mexico onshore and offshore pipeline that has assisted in locating a cost-effective pipeline route based on landcover type, wetland distribution, and proximity to other environmentally sensitive resources. Described here are the methods used to integrate various sources of available GIS data with satellite imagery and surveyed information. Costs of collecting and processing these data are compared with benefits of the system over use of manual methods.

Disease management positively affects patient quality of life.

PubMed

Walker, David R; Landis, Darryl L; Stern, Patricia M; Vance, Richard P

2003-04-01

Health care costs are spiraling upward. The population of the United States is aging, and many baby boomers will develop multiple chronic health conditions. Disease management is one method for reducing costs associated with chronic health conditions. Although these programs have been proven effective in improving patient health, detailed information about their effect on patient quality of life has been scarce. This article provides preliminary evidence that disease management programs for coronary artery disease, chronic obstructive pulmonary disease, diabetes, and heart failure lead to improved quality of life, which correlates with a healthier, more satisfied, and less costly patient.

18. Uniform cost accounting in long-term care.

PubMed

Sorensen, J E

1976-05-01

Uniform cost data are essential for managing health services, establishing billing and reimbursement rates, and measuring effectiveness and impact. Although it is especially difficult in the case of long-term health care to develop standard cost accounting procedures because of the varied configurations of inpatient, intermediate, and ambulatory services, the overall approaches to cost accounting and its content can be made more uniform. With this purpose in mind, a general model of cost accounting is presented for a multilevel program of long-term services, together with a special method for ambulatory services using "hours accounted for" as the basic measure.

Potential Cost-effectiveness of Early Identification of Hospital-acquired Infection in Critically Ill Patients.

PubMed

Tsalik, Ephraim L; Li, Yanhong; Hudson, Lori L; Chu, Vivian H; Himmel, Tiffany; Limkakeng, Alex T; Katz, Jason N; Glickman, Seth W; McClain, Micah T; Welty-Wolf, Karen E; Fowler, Vance G; Ginsburg, Geoffrey S; Woods, Christopher W; Reed, Shelby D

2016-03-01

Limitations in methods for the rapid diagnosis of hospital-acquired infections often delay initiation of effective antimicrobial therapy. New diagnostic approaches offer potential clinical and cost-related improvements in the management of these infections. We developed a decision modeling framework to assess the potential cost-effectiveness of a rapid biomarker assay to identify hospital-acquired infection in high-risk patients earlier than standard diagnostic testing. The framework includes parameters representing rates of infection, rates of delayed appropriate therapy, and impact of delayed therapy on mortality, along with assumptions about diagnostic test characteristics and their impact on delayed therapy and length of stay. Parameter estimates were based on contemporary, published studies and supplemented with data from a four-site, observational, clinical study. Extensive sensitivity analyses were performed. The base-case analysis assumed 17.6% of ventilated patients and 11.2% of nonventilated patients develop hospital-acquired infection and that 28.7% of patients with hospital-acquired infection experience delays in appropriate antibiotic therapy with standard care. We assumed this percentage decreased by 50% (to 14.4%) among patients with true-positive results and increased by 50% (to 43.1%) among patients with false-negative results using a hypothetical biomarker assay. Cost of testing was set at $110/d. In the base-case analysis, among ventilated patients, daily diagnostic testing starting on admission reduced inpatient mortality from 12.3 to 11.9% and increased mean costs by $1,640 per patient, resulting in an incremental cost-effectiveness ratio of $21,389 per life-year saved. Among nonventilated patients, inpatient mortality decreased from 7.3 to 7.1% and costs increased by $1,381 with diagnostic testing. The resulting incremental cost-effectiveness ratio was $42,325 per life-year saved. Threshold analyses revealed the probabilities of developing hospital-acquired infection in ventilated and nonventilated patients could be as low as 8.4 and 9.8%, respectively, to maintain incremental cost-effectiveness ratios less than $50,000 per life-year saved. Development and use of serial diagnostic testing that reduces the proportion of patients with delays in appropriate antibiotic therapy for hospital-acquired infections could reduce inpatient mortality. The model presented here offers a cost-effectiveness framework for future test development.

Conceptual model for early health technology assessment of current and novel heart valve interventions

PubMed Central

Huygens, Simone A; Rutten-van Mölken, Maureen P M H; Bekkers, Jos A; Bogers, Ad J J C; Bouten, Carlijn V C; Chamuleau, Steven A J; de Jaegere, Peter P T; Kappetein, Arie Pieter; Kluin, Jolanda; van Mieghem, Nicolas M D A; Versteegh, Michel I M; Witsenburg, Maarten; Takkenberg, Johanna J M

2016-01-01

Objective The future promises many technological advances in the field of heart valve interventions, like tissue-engineered heart valves (TEHV). Prior to introduction in clinical practice, it is essential to perform early health technology assessment. We aim to develop a conceptual model (CM) that can be used to investigate the performance and costs requirements for TEHV to become cost-effective. Methods After scoping the decision problem, a workgroup developed the draft CM based on clinical guidelines. This model was compared with existing models for cost-effectiveness of heart valve interventions, identified by systematic literature search. Next, it was discussed with a Delphi panel of cardiothoracic surgeons, cardiologists and a biomedical scientist (n=10). Results The CM starts with the valve implantation. If patients survive the intervention, they can remain alive without complications, die from non-valve-related causes or experience a valve-related event. The events are separated in early and late events. After surviving an event, patients can experience another event or die due to non-valve-related causes. Predictors will include age, gender, NYHA class, left ventricular function and diabetes. Costs and quality adjusted life years are to be attached to health conditions to estimate long-term costs and health outcomes. Conclusions We developed a CM that will serve as foundation of a decision-analytic model that can estimate the potential cost-effectiveness of TEHV in early development stages. This supports developers in deciding about further development of TEHV and identifies promising interventions that may result in faster take-up in clinical practice by clinicians and reimbursement by payers. PMID:27843569

The Need for Technology Maturity of Any Advanced Capability to Achieve Better Life Cycle Cost (LCC)

NASA Technical Reports Server (NTRS)

Robinson, John W.; Levack, Daniel J. H.; Rhodes, Russel E.; Chen, Timothy T.

2009-01-01

Programs such as space transportation systems are developed and deployed only rarely, and they have long development schedules and large development and life cycle costs (LCC). They have not historically had their LCC predicted well and have only had an effort to control the DDT&E phase of the programs. One of the factors driving the predictability, and thus control, of the LCC of a program is the maturity of the technologies incorporated in the program. If the technologies incorporated are less mature (as measured by their Technology Readiness Level - TRL), then the LCC not only increases but the degree of increase is difficult to predict. Consequently, new programs avoid incorporating technologies unless they are quite mature, generally TRL greater than or equal to 7 (system prototype demonstrated in a space environment) to allow better predictability of the DDT&E phase costs unless there is no alternative. On the other hand, technology development programs rarely develop technologies beyond TRL 6 (system/subsystem model or prototype demonstrated in a relevant environment). Currently the lack of development funds beyond TRL 6 and the major funding required for full scale development leave little or no funding available to prototype TRL 6 concepts so that hardware would be in the ready mode for safe, reliable and cost effective incorporation. The net effect is that each new program either incorporates little new technology or has longer development schedules and costs, and higher LCC, than planned. This paper presents methods to ensure that advanced technologies are incorporated into future programs while providing a greater accuracy of predicting their LCC. One method is having a dedicated organization to develop X-series vehicles or separate prototypes carried on other vehicles. The question of whether such an organization should be independent of NASA and/or have an independent funding source is discussed. Other methods are also discussed. How to make the choice of which technologies to pursue to the prototype level is also discussed since, to achieve better LCC, first the selection of the appropriate technologies.

The cost and cost-effectiveness of gender-responsive interventions for HIV: a systematic review

PubMed Central

Remme, Michelle; Siapka, Mariana; Vassall, Anna; Heise, Lori; Jacobi, Jantine; Ahumada, Claudia; Gay, Jill; Watts, Charlotte

2014-01-01

Introduction Harmful gender norms and inequalities, including gender-based violence, are important structural barriers to effective HIV programming. We assess current evidence on what forms of gender-responsive intervention may enhance the effectiveness of basic HIV programmes and be cost-effective. Methods Effective intervention models were identified from an existing evidence review (“what works for women”). Based on this, we conducted a systematic review of published and grey literature on the costs and cost-effectiveness of each intervention identified. Where possible, we compared incremental costs and effects. Results Our effectiveness search identified 36 publications, reporting on the effectiveness of 22 HIV interventions with a gender focus. Of these, 11 types of interventions had a corresponding/comparable costing or cost-effectiveness study. The findings suggest that couple counselling for the prevention of vertical transmission; gender empowerment, community mobilization, and female condom promotion for female sex workers; expanded female condom distribution for the general population; and post-exposure HIV prophylaxis for rape survivors are cost-effective HIV interventions. Cash transfers for schoolgirls and school support for orphan girls may also be cost-effective in generalized epidemic settings. Conclusions There has been limited research to assess the cost-effectiveness of interventions that seek to address women's needs and transform harmful gender norms. Our review identified several promising, cost-effective interventions that merit consideration as critical enablers in HIV investment approaches, as well as highlight that broader gender and development interventions can have positive HIV impacts. By no means an exhaustive package, these represent a first set of interventions to be included in the investment framework. PMID:25373519

Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarsa, Eric

2015-08-31

During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimallymore » distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.« less

Valuing inter-sectoral costs and benefits of interventions in the healthcare sector: methods for obtaining unit prices.

PubMed

Drost, Ruben M W A; Paulus, Aggie T G; Ruwaard, Dirk; Evers, Silvia M A A

2017-02-01

There is a lack of knowledge about methods for valuing health intervention-related costs and monetary benefits in the education and criminal justice sectors, also known as 'inter-sectoral costs and benefits' (ICBs). The objective of this study was to develop methods for obtaining unit prices for the valuation of ICBs. By conducting an exploratory literature study and expert interviews, several generic methods were developed. The methods' feasibility was assessed through application in the Netherlands. Results were validated in an expert meeting, which was attended by policy makers, public health experts, health economists and HTA-experts, and discussed at several international conferences and symposia. The study resulted in four methods, including the opportunity cost method (A) and valuation using available unit prices (B), self-constructed unit prices (C) or hourly labor costs (D). The methods developed can be used internationally and are valuable for the broad international field of HTA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petruccelli, Umberto, E-mail: umberto.petruccelli@unibas.it

Many studies about the external costs generated by the transport system have been developed in the last twenty years. To standardize methodologies and assessment procedures to be used in the evaluation of the projects, some European countries recently have adopted specific guidelines that differ from each other in some aspects even sensibly. This paper presents a critical analysis of the British, Italian and German guidelines and is aimed at cataloguing the external cost types regarded and the assessment methods indicated as well as to highlight the differences of the results, in terms of applicability and reliability. The goal is tomore » contribute to a European standardization process that would lead to the drafting of guidelines suited for all EU countries. - Highlights: • The analyzed guidelines agree on the methods to evaluate costs from air pollution, greenhouse gases and accidents. • They recommend respectively: dose-resp. approach; costs to reduce/permit emissions; whole direct, indirect and social costs. • For noise, DE guide indicates defensive expenditure or SP methods; IT guide, SP method; UK guide, the hedonic prices one. • For on territory impact, DE guide regards only the barrier effect; the IT one, also the soil consumption and system effects. • British guide proposes a qualitative methodology to estimate the impact on various landscapes and environments.« less

Steps toward a globally available malaria vaccine: harnessing the potential of algae for future low cost vaccines.

PubMed

Jones, Carla S; Mayfield, Stephen P

2013-01-01

Malaria is an infectious disease that threatens half of the world's population. This debilitating disease is caused by infection from parasites of the genus Plasmodium. Insecticides, bed nets and drug therapies have lowered the prevalence and death rate associated with malaria but this disease continues to plague many populations around the world. In recent years, many organizations have suggested developing methods for a complete eradication of malaria. The most straightforward and effective method for this potential eradication will be through the development of a low-cost vaccine. To achieve eradication, it will be necessary to develop new vaccine candidates and novel systems for both the production and delivery of these vaccines. Recently, the green algae Chlamydomonas reinhardtii has been used for the recombinant expression of malaria vaccine candidates including the transmission blocking vaccine candidate Pfs48/45. Here, we discuss the potential of this research on the future development of a low-cost malaria vaccine candidate.

A global economic model to assess the cost-effectiveness of new treatments for advanced breast cancer in Canada.

PubMed

Beauchemin, C; Letarte, N; Mathurin, K; Yelle, L; Lachaine, J

2016-06-01

Objective Considering the increasing number of treatment options for metastatic breast cancer (MBC), it is important to develop high-quality methods to assess the cost-effectiveness of new anti-cancer drugs. This study aims to develop a global economic model that could be used as a benchmark for the economic evaluation of new therapies for MBC. Methods The Global Pharmacoeconomics of Metastatic Breast Cancer (GPMBC) model is a Markov model that was constructed to estimate the incremental cost per quality-adjusted life years (QALY) of new treatments for MBC from a Canadian healthcare system perspective over a lifetime horizon. Specific parameters included in the model are cost of drug treatment, survival outcomes, and incidence of treatment-related adverse events (AEs). Global parameters are patient characteristics, health states utilities, disutilities, and costs associated with treatment-related AEs, as well as costs associated with drug administration, medical follow-up, and end-of-life care. The GPMBC model was tested and validated in a specific context, by assessing the cost-effectiveness of lapatinib plus letrozole compared with other widely used first-line therapies for post-menopausal women with hormone receptor-positive (HR+) and epidermal growth factor receptor 2-positive (HER2+) MBC. Results When tested, the GPMBC model led to incremental cost-utility ratios of CA$131 811 per QALY, CA$56 211 per QALY, and CA$102 477 per QALY for the comparison of lapatinib plus letrozole vs letrozole alone, trastuzumab plus anastrozole, and anastrozole alone, respectively. Results of the model testing were quite similar to those obtained by Delea et al., who also assessed the cost-effectiveness of lapatinib in combination with letrozole in HR+/HER2 + MBC in Canada, thus suggesting that the GPMBC model can replicate results of well-conducted economic evaluations. Conclusions The GPMBC model can be very valuable as it allows a quick and valid assessment of the cost-effectiveness of any new treatments for MBC in a Canadian context.

Integrating Low-Cost Rapid Usability Testing into Agile System Development of Healthcare IT: A Methodological Perspective.

PubMed

Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

The development of more usable and effective healthcare information systems has become a critical issue. In the software industry methodologies such as agile and iterative development processes have emerged to lead to more effective and usable systems. These approaches highlight focusing on user needs and promoting iterative and flexible development practices. Evaluation and testing of iterative agile development cycles is considered an important part of the agile methodology and iterative processes for system design and re-design. However, the issue of how to effectively integrate usability testing methods into rapid and flexible agile design cycles has remained to be fully explored. In this paper we describe our application of an approach known as low-cost rapid usability testing as it has been applied within agile system development in healthcare. The advantages of the integrative approach are described, along with current methodological considerations.

Comparison of "E-Rater"[R] Automated Essay Scoring Model Calibration Methods Based on Distributional Targets

ERIC Educational Resources Information Center

Zhang, Mo; Williamson, David M.; Breyer, F. Jay; Trapani, Catherine

2012-01-01

This article describes two separate, related studies that provide insight into the effectiveness of "e-rater" score calibration methods based on different distributional targets. In the first study, we developed and evaluated a new type of "e-rater" scoring model that was cost-effective and applicable under conditions of absent human rating and…

A cost-effective method to prepare curcumin nanosuspensions with enhanced oral bioavailability.

PubMed

Wang, Yutong; Wang, Changyuan; Zhao, Jing; Ding, Yanfang; Li, Lei

2017-01-01

Nanosuspension is one of the most promising strategies to improve the oral bioavailability of insoluble drugs. The existing techniques applied to produce nanosuspensions are classified as "bottom-up" or "top-down" methods, or a combination of both. Curcumin (CUR), a Biopharmaceutics Classification System (BCS) class IV substance, is a promising drug candidate in view of its good bioactivity, but its use is limited due to its poor solubility and permeability. In the present study, CUR nanosuspensions were developed to enhance CUR oral bioavailability using a cost-effective method different from conventional techniques. The physicochemical properties of CUR nanosuspensions were characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The crystalline state of CUR in different nanosuspensions analyzed using differential scanning calorimeter (DSC) and X-ray diffraction analysis (PXRD) confirmed its amorphous state. In vitro dissolution degree of the prepared CUR nanosuspensions using TPGS or Brij78 as stabilizer was greatly increased. Pharmacokinetic studies demonstrated that the oral bioavailability of CUR was increased 3.18 and 3.7 times after administration of CUR/TPGS nanosuspensions or CUR/Brij78 nanosuspensions, when compared with the administration of CUR suspension. CUR nanosuspensions produced by our cost-effective method could improve its oral bioavailability. In addition, the low-cost and time-saving method reported here is highly suitable for a fast and inexpensive preparation. Copyright © 2016 Elsevier Inc. All rights reserved.

Cost-effectiveness and Pricing of Antibacterial Drugs

PubMed Central

Verhoef, Talitha I; Morris, Stephen

2015-01-01

Growing resistance to antibacterial agents has increased the need for the development of new drugs to treat bacterial infections. Given increasing pressure on limited health budgets, it is important to study the cost-effectiveness of these drugs, as well as their safety and efficacy, to find out whether or not they provide value for money and should be reimbursed. In this article, we systematically reviewed 38 cost-effectiveness analyses of new antibacterial agents. Most studies showed the new antibacterial drugs were cost-effective compared to older generation drugs. Drug pricing is a complicated process, involving different stakeholders, and has a large influence on cost-effectiveness. Value-based pricing is a method to determine the price of a drug at which it can be cost-effective. It is currently unclear what the influence of value-based pricing will be on the prices of new antibacterial agents, but an important factor will be the definition of ‘value’, which as well as the impact of the drug on patient health might also include other factors such as wider social impact and the health impact of disease. PMID:25521641

Female sterilization: update on clinical efficacy, side effects and contraindications.

PubMed

Gizzo, Salvatore; Bertocco, Anna; Saccardi, Carlo; Di Gangi, Stefania; Litta, Pietro Salvatore; D'antona, Donato; Nardelli, Giovanni Battista

2014-10-01

The aim of this review is to compare studies concerning female sterilization in order to define the most suitable approach and device for each patient considering timing, safety, cost-effectiveness, failure rate, complication rate and patient satisfaction. A systematic literature search was conducted in electronic databases MEDLINE-EMBASE-Sciencedirect and Cochrane Library between 2000 and 2012. All original descriptions, case reports, retrospective and review articles on tubal sterilization methods have been considered. Outcome measures were effectiveness, tolerability, procedure complications and female satisfaction. The ideal female sterilization system should be a simple, safe, highly efficient, easily learned, inexpensive, one-time procedure without negative side-effects. Nowadays, the trans-cervical approach is associated with minimal postoperative pain, allowing short hospitalization and fast resumption of daily activities. Laparoscopic and laparotomic approaches are considered second choices, since, particularly in developing countries, the transcervical hysteroscopic methods will increasingly spread within gynaecological clinical practice. Safety issues, hospital stay, costs and surgeons' experience are important factors in decision-making of the method for female sterilization. Hysteroscopic devices should be preferred when possible. The counselling time remains a fundamental step in choice. The decision concerning method depends on the setting, the surgeon's experience, the country's economical development and the woman's preference.

Impacts of rainfall variability and expected rainfall changes on cost-effective adaptation of water systems to climate change.

PubMed

van der Pol, T D; van Ierland, E C; Gabbert, S; Weikard, H-P; Hendrix, E M T

2015-05-01

Stormwater drainage and other water systems are vulnerable to changes in rainfall and runoff and need to be adapted to climate change. This paper studies impacts of rainfall variability and changing return periods of rainfall extremes on cost-effective adaptation of water systems to climate change given a predefined system performance target, for example a flood risk standard. Rainfall variability causes system performance estimates to be volatile. These estimates may be used to recurrently evaluate system performance. This paper presents a model for this setting, and develops a solution method to identify cost-effective investments in stormwater drainage adaptations. Runoff and water levels are simulated with rainfall from stationary rainfall distributions, and time series of annual rainfall maxima are simulated for a climate scenario. Cost-effective investment strategies are determined by dynamic programming. The method is applied to study the choice of volume for a storage basin in a Dutch polder. We find that 'white noise', i.e. trend-free variability of rainfall, might cause earlier re-investment than expected under projected changes in rainfall. The risk of early re-investment may be reduced by increasing initial investment. This can be cost-effective if the investment involves fixed costs. Increasing initial investments, therefore, not only increases water system robustness to structural changes in rainfall, but could also offer insurance against additional costs that would occur if system performance is underestimated and re-investment becomes inevitable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Will Sofosbuvir/Ledipasvir (Harvoni) Be Cost-Effective and Affordable for Chinese Patients Infected with Hepatitis C Virus? An Economic Analysis Using Real-World Data

PubMed Central

Duan, Zhong-Ping; Dou, Xiao-Guang; Xie, Qing; Zhang, Wen-Hong; Lu, Lun-Gen; Fan, Jian-Gao; Cheng, Jun; Wang, Gui-Qiang; Ren, Hong; Wang, Jiu-Ping; Yang, Xing-Xiang; Jia, Zhan-Sheng; Fu, Qing-Chun; Wang, Xiao-Jin; Shang, Jia; Zhang, Yue-Xin; Han, Ying; Du, Ning; Shao, Qing; Ji, Dong; Li, Fan; Li, Bing; Liu, Jia-Liang; Niu, Xiao-Xia; Wang, Cheng; Wu, Vanessa; Wong, April; Wang, Yu-Dong; Hou, Jin-Lin; Jia, Ji-Dong; Zhuang, Hui; Lau, George

2016-01-01

Background Little is known on the cost-effectiveness of novel regimens for hepatitis C virus (HCV) compared with standard-of-care with pegylated interferon (pegIFN) and ribavirin (RBV) therapy in developing countries. We evaluated cost-effectiveness of sofosbuvir/ledipasvir for 12 weeks compared with a 48-week pegIFN-RBV regimen in Chinese patients with genotype 1b HCV infection by economic regions. Methods A decision analytic Markov model was developed to estimate quality-adjusted-life-years, lifetime cost of HCV infection and incremental cost-effectiveness ratios (ICERs). SVR rates and direct medical costs were obtained from real-world data. Parameter uncertainty was assessed by one-way and probabilistic sensitivity analyses. Threshold analysis was conducted to estimate the price which can make the regimen cost-effective and affordable. Results Sofosbuvir/ledipasvir was cost-effective in treatment-experienced patients with an ICER of US$21,612. It varied by economic regions. The probability of cost-effectiveness was 18% and 47% for treatment-naive and experienced patients, and it ranged from 15% in treatment-naïve patients in Central-China to 64% in treatment-experienced patients in Eastern-China. The price of 12-week sofosbuvir/ledipasvir treatment needs to be reduced by at least 81% to US$18,185 to make the regimen cost-effective in all patients at WTP of one time GDP per capita. The price has to be US$105 to make the regimen affordable in average patients in China. Conclusion Sofosbuvir/ledipasvir regimen is not cost-effective in most Chinese patients with genotype 1b HCV infection. The results vary by economic regions. Drug price of sofosbuvir/ledipasvir needs to be substantially reduced when entering the market in China to ensure the widest accessibility. PMID:27276081

Managing risks and hazardous in industrial operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almaula, S.C.

1996-12-31

The main objective of this paper is to demonstrate that it makes good business sense to identify risks and hazards of an operation and take appropriate steps to manage them effectively. Developing and implementing an effective risk and hazard management plan also contibutes to other industry requirements and standards. Development of a risk management system, key elements of a risk management plan, and hazards and risk analysis methods are outlined. Comparing potential risk to the cost of prevention is also discussed. It is estimated that the cost of developing and preparing the first risk management plan varies between $50,000 tomore » $200,000. 3 refs., 2 figs., 1 tab.« less

Cost-effectiveness of stereotactic radiosurgery versus whole-brain radiation therapy for up to 10 brain metastases.

PubMed

Lester-Coll, Nataniel H; Dosoretz, Arie P; Magnuson, William J; Laurans, Maxwell S; Chiang, Veronica L; Yu, James B

2016-12-01

OBJECTIVE The JLGK0901 study found that stereotactic radiosurgery (SRS) is a safe and effective treatment option for treating up to 10 brain metastases. The purpose of this study is to determine the cost-effectiveness of treating up to 10 brain metastases with SRS, whole-brain radiation therapy (WBRT), or SRS and immediate WBRT (SRS+WBRT). METHODS A Markov model was developed to evaluate the cost effectiveness of SRS, WBRT, and SRS+WBRT in patients with 1 or 2-10 brain metastases. Transition probabilities were derived from the JLGK0901 study and modified according to the recurrence rates observed in the Radiation Therapy Oncology Group (RTOG) 9508 and European Organization for Research and Treatment of Cancer (EORTC) 22952-26001 studies to simulate the outcomes for patients who receive WBRT. Costs are based on 2015 Medicare reimbursements. Health state utilities were prospectively collected using the Standard Gamble method. End points included cost, quality-adjusted life years (QALYs), and incremental cost-effectiveness ratios (ICERs). The willingness-to-pay (WTP) threshold was $100,000 per QALY. One-way and probabilistic sensitivity analyses explored uncertainty with regard to the model assumptions. RESULTS In patients with 1 brain metastasis, the ICERs for SRS versus WBRT, SRS versus SRS+WBRT, and SRS+WBRT versus WBRT were $117,418, $51,348, and $746,997 per QALY gained, respectively. In patients with 2-10 brain metastases, the ICERs were $123,256, $58,903, and $821,042 per QALY gained, respectively. On the sensitivity analyses, the model was sensitive to the cost of SRS and the utilities associated with stable post-SRS and post-WBRT states. In patients with 2-10 brain metastases, SRS versus WBRT becomes cost-effective if the cost of SRS is reduced by $3512. SRS versus WBRT was also cost effective at a WTP of $200,000 per QALY on the probabilistic sensitivity analysis. CONCLUSIONS The most cost-effective strategy for patients with up to 10 brain metastases is SRS alone relative to SRS+WBRT. SRS alone may also be cost-effective relative to WBRT alone, but this depends on WTP, the cost of SRS, and patient preferences.

APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2003-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Patrick Gonzalez

2004-07-10

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: remote sensing for carbon analysis; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Mind the Gap! A Multilevel Analysis of Factors Related to Variation in Published Cost-Effectiveness Estimates within and between Countries.

PubMed

Boehler, Christian E H; Lord, Joanne

2016-01-01

Published cost-effectiveness estimates can vary considerably, both within and between countries. Despite extensive discussion, little is known empirically about factors relating to these variations. To use multilevel statistical modeling to integrate cost-effectiveness estimates from published economic evaluations to investigate potential causes of variation. Cost-effectiveness studies of statins for cardiovascular disease prevention were identified by systematic review. Estimates of incremental costs and effects were extracted from reported base case, sensitivity, and subgroup analyses, with estimates grouped in studies and in countries. Three bivariate models were developed: a cross-classified model to accommodate data from multinational studies, a hierarchical model with multinational data allocated to a single category at country level, and a hierarchical model excluding multinational data. Covariates at different levels were drawn from a long list of factors suggested in the literature. We found 67 studies reporting 2094 cost-effectiveness estimates relating to 23 countries (6 studies reporting for more than 1 country). Data and study-level covariates included patient characteristics, intervention and comparator cost, and some study methods (e.g., discount rates and time horizon). After adjusting for these factors, the proportion of variation attributable to countries was negligible in the cross-classified model but moderate in the hierarchical models (14%-19% of total variance). Country-level variables that improved the fit of the hierarchical models included measures of income and health care finance, health care resources, and population risks. Our analysis suggested that variability in published cost-effectiveness estimates is related more to differences in study methods than to differences in national context. Multinational studies were associated with much lower country-level variation than single-country studies. These findings are for a single clinical question and may be atypical. © The Author(s) 2015.

NEW METHODS TO SCREEN FOR DEVELOPMENTAL NEUROTOXICITY.

EPA Science Inventory

The development of alternative methods for toxicity testing is driven by the need for scientifically valid data (i.e. predictive of a toxic effect) that can be obtained in a rapid and cost-efficient manner. These predictions will enable decisions to be made as to whether further ...

[Screening for cancer - economic consideration and cost-effectiveness].

PubMed

Kjellberg, Jakob

2014-06-09

Cost-effectiveness analysis has become an accepted method to evaluate medical technology and allocate scarce health-care resources. Published decision analyses show that screening for cancer in general is cost-effective. However, cost-effectiveness analyses are only as good as the clinical data and the results are sensitive to the chosen methods and perspective of the analysis.

Economic Evaluation of a Comprehensive Teenage Pregnancy Prevention Program: Pilot Program

PubMed Central

Rosenthal, Marjorie S.; Ross, Joseph S.; Bilodeau, RoseAnne; Richter, Rosemary S.; Palley, Jane E.; Bradley, Elizabeth H.

2011-01-01

Background Previous research has suggested that comprehensive teenage pregnancy prevention programs that address sexual education and life skills development and provide academic are effective in reducing births among enrolled teenagers. However, there have been limited data on costs and cost-effectiveness of such programs. Objectives To use a community-based participatory research approach, to develop estimates of the cost-benefit of the Pathways/Senderos Center, a comprehensive neighborhood-based program to prevent unintended pregnancies and promote positive development for adolescents. Methods Using data from 1997-2003, we conducted an in-time intervention analysis to determine program cost-benefit while teenagers were enrolled and then used an extrapolation analysis to estimate accyrred economibc benefits and cost-benefit up to age 30. Results The program operating costs totaled $3,228,152.59 and reduced the teenage childbearing rate from 94.10 to 40.00 per 1000 teenage females, averting $52,297.84 in total societal costs, with an economic benefit to society from program participation of $2,673,153.11. Therefore, total costs to society exceeded economic benefits by $559,677.05, or $1,599.08 per adolescent per year. In an extrapolation analysis, benefits to society exceed costs by $10,474.77 per adolescent per year by age 30 on average, with social benefits outweighing total social costs by age 20.1. Conclusions We estimate that this comprehensive teenage pregnancy prevention program would provide societal economic benefits once participants are young adults, suggesting the need to expand beyond pilot demonstrations and evaluate the long-range cost-effectiveness of similarly comprehensive programs when implemented more widely in high-risk neighborhoods. PMID:19896030

Estimating Development Cost of an Interactive Website Based Cancer Screening Promotion Program

PubMed Central

Lairson, David R.; Chung, Tong Han; Smith, Lisa G.; Springston, Jeffrey K.; Champion, Victoria L.

2015-01-01

Objectives The aim of this study was to estimate the initial development costs for an innovative talk show format tailored intervention delivered via the interactive web, for increasing cancer screening in women 50 to 75 who were non-adherent to screening guidelines for colorectal cancer and/or breast cancer. Methods The cost of the intervention development was estimated from a societal perspective. Micro costing methods plus vendor contract costs were used to estimate cost. Staff logs were used to track personnel time. Non-personnel costs include all additional resources used to produce the intervention. Results Development cost of the interactive web based intervention was $.39 million, of which 77% was direct cost. About 98% of the cost was incurred in personnel time cost, contract cost and overhead cost. Conclusions The new web-based disease prevention medium required substantial investment in health promotion and media specialist time. The development cost was primarily driven by the high level of human capital required. The cost of intervention development is important information for assessing and planning future public and private investments in web-based health promotion interventions. PMID:25749548

EOS imaging versus current radiography: A health technology assessment study

PubMed Central

Mahboub-Ahari, Alireza; Hajebrahimi, Sakineh; Yusefi, Mahmoud; Velayati, Ashraf

2016-01-01

Background: EOS is a 2D/3D muscle skeletal diagnostic imaging system. The device has been developed to produce a high quality 2D, full body radiographs in standing, sitting and squatting positions. Three dimensional images can be reconstructed via sterEOS software. This Health Technology Assessment study aimed to investigate efficacy, effectiveness and cost-effectiveness of new emerged EOS imaging system in comparison with conventional x-ray radiographic techniques. Methods: All cost and outcome data were assessed from Iran's Ministry of Health Perspective. Data for clinical effectiveness was extracted using a rigorous systematic review. As clinical outcomes the rate of x-ray emission and related quality of life were compared with Computed Radiography (CR) and Digital Radiography (DR). Standard costing method was conducted to find related direct medical costs. In order to examine robustness of the calculated Incremental Cost Effectiveness Ratios (ICERs) we used two-way sensitivity analysis. GDP Per capita of Islamic Republic of Iran (2012) adopted as cost-effectiveness threshold. Results: Review of related literature highlighted the lack of rigorous evidence for clinical outcomes. Ultra low dose EOS imaging device is known as a safe intervention because of FDA, CE and CSA certificates. The rate of emitted X-ray was 2 to 18 fold lower for EOS compared to the conventional techniques (p<0.001). The Incremental Cost Effectiveness Ratio for EOS relative to CR calculated $50706 in baseline analysis (the first scenario) and $50714, $9446 respectively for the second and third scenarios. Considering the value of neither $42146 as upper limit, nor the first neither the second scenario could pass the cost-effectiveness threshold for Iran. Conclusion: EOS imaging technique might not be considered as a cost-effective intervention in routine practice of health system, especially within in-patient wards. Scenario analysis shows that, only in an optimum condition such as lower assembling costs and higher utilization rates, the device can be recruited for research and therapeutic purposes in pediatric orthopedic centers. PMID:27390701

Better Informing Decision Making with Multiple Outcomes Cost-Effectiveness Analysis under Uncertainty in Cost-Disutility Space

PubMed Central

McCaffrey, Nikki; Agar, Meera; Harlum, Janeane; Karnon, Jonathon; Currow, David; Eckermann, Simon

2015-01-01

Introduction Comparing multiple, diverse outcomes with cost-effectiveness analysis (CEA) is important, yet challenging in areas like palliative care where domains are unamenable to integration with survival. Generic multi-attribute utility values exclude important domains and non-health outcomes, while partial analyses—where outcomes are considered separately, with their joint relationship under uncertainty ignored—lead to incorrect inference regarding preferred strategies. Objective The objective of this paper is to consider whether such decision making can be better informed with alternative presentation and summary measures, extending methods previously shown to have advantages in multiple strategy comparison. Methods Multiple outcomes CEA of a home-based palliative care model (PEACH) relative to usual care is undertaken in cost disutility (CDU) space and compared with analysis on the cost-effectiveness plane. Summary measures developed for comparing strategies across potential threshold values for multiple outcomes include: expected net loss (ENL) planes quantifying differences in expected net benefit; the ENL contour identifying preferred strategies minimising ENL and their expected value of perfect information; and cost-effectiveness acceptability planes showing probability of strategies minimising ENL. Results Conventional analysis suggests PEACH is cost-effective when the threshold value per additional day at home ( 1) exceeds $1,068 or dominated by usual care when only the proportion of home deaths is considered. In contrast, neither alternative dominate in CDU space where cost and outcomes are jointly considered, with the optimal strategy depending on threshold values. For example, PEACH minimises ENL when 1=$2,000 and 2=$2,000 (threshold value for dying at home), with a 51.6% chance of PEACH being cost-effective. Conclusion Comparison in CDU space and associated summary measures have distinct advantages to multiple domain comparisons, aiding transparent and robust joint comparison of costs and multiple effects under uncertainty across potential threshold values for effect, better informing net benefit assessment and related reimbursement and research decisions. PMID:25751629

An Approach for Transmission Loss and Cost Allocation by Loss Allocation Index and Co-operative Game Theory

NASA Astrophysics Data System (ADS)

Khan, Baseem; Agnihotri, Ganga; Mishra, Anuprita S.

2016-03-01

In the present work authors proposed a novel method for transmission loss and cost allocation to users (generators and loads). In the developed methodology transmission losses are allocated to users based on their usage of the transmission line. After usage allocation, particular loss allocation indices (PLAI) are evaluated for loads and generators. Also Cooperative game theory approach is applied for comparison of results. The proposed method is simple and easy to implement on the practical power system. Sample 6 bus and IEEE 14 bus system is used for showing the effectiveness of proposed method.

On the use of IT investment assessment methods in the area of spatial data infrastructure

NASA Astrophysics Data System (ADS)

Zwirowicz-Rutkowska, Agnieszka

2016-06-01

One of the important issues concerning development of spatial data infrastructures (SDIs) is the carrying out of economic and financial analysis. It is essential to determine expenses and also assess effects resulting from the development and use of infrastructures. Costs and benefits assessment could be associated with assessment of the infrastructure effectiveness and efficiency as well as the infrastructure value, understood as the infrastructure impact on economic aspects of an organisational performance, both of an organisation which realises an SDI project and all users of the infrastructure. The aim of this paper is an overview of various assessment methods of investment as well as an analysis of different types of costs and benefits used for information technology (IT) projects. Based on the literature, the analysis of the examples of the use of these methods in the area of spatial data infrastructures is also presented. Furthermore, the issues of SDI projects and investments are outlined. The results of the analysis indicate usefulness of the financial methods from different fields of management in the area of SDI building, development and use. The author proposes, in addition to the financial methods, the adaptation of the various techniques used for IT investments and their development, taking into consideration the SDI specificity for the purpose of assessment of different types of costs and benefits and integration of financial aspects with non-financial ones. Among the challenges are identification and quantification of costs and benefits, as well as establishing measures which would fit the characteristics of the SDI project and artefacts resulting from the project realisation. Moreover, aspects of subjectivity and variability in time should be taken into account as the consequences of definite goals and policies as well as business context of organisation undertaking the project or using its artefacts and also investors.

Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics.

PubMed

Kim, Jeong Hun; Hwang, Ji-Young; Hwang, Ha Ryeon; Kim, Han Seop; Lee, Joong Hoon; Seo, Jae-Won; Shin, Ueon Sang; Lee, Sang-Hoon

2018-01-22

The development of various flexible and stretchable materials has attracted interest for promising applications in biomedical engineering and electronics industries. This interest in wearable electronics, stretchable circuits, and flexible displays has created a demand for stable, easily manufactured, and cheap materials. However, the construction of flexible and elastic electronics, on which commercial electronic components can be mounted through simple and cost-effective processing, remains challenging. We have developed a nanocomposite of carbon nanotubes (CNTs) and polydimethylsiloxane (PDMS) elastomer. To achieve uniform distributions of CNTs within the polymer, an optimized dispersion process was developed using isopropyl alcohol (IPA) and methyl-terminated PDMS in combination with ultrasonication. After vaporizing the IPA, various shapes and sizes can be easily created with the nanocomposite, depending on the mold. The material provides high flexibility, elasticity, and electrical conductivity without requiring a sandwich structure. It is also biocompatible and mechanically stable, as demonstrated by cytotoxicity assays and cyclic strain tests (over 10,000 times). We demonstrate the potential for the healthcare field through strain sensor, flexible electric circuits, and biopotential measurements such as EEG, ECG, and EMG. This simple and cost-effective fabrication method for CNT/PDMS composites provides a promising process and material for various applications of wearable electronics.

The impact of changing dental needs on cost savings from fluoridation.

PubMed

Campain, A C; Mariño, R J; Wright, F A C; Harrison, D; Bailey, D L; Morgan, M V

2010-03-01

Although community water fluoridation has been one of the cornerstone strategies for the prevention and control of dental caries, questions are still raised regarding its cost-effectiveness. This study assessed the impact of changing dental needs on the cost savings from community water fluoridation in Australia. Net costs were estimated as Costs((programme)) minus Costs((averted caries).) Averted costs were estimated as the product of caries increment in non-fluoridated community, effectiveness of fluoridation and the cost of a carious surface. Modelling considered four age-cohorts: 6-20, 21-45, 46-65 and 66+ years and three time points 1970s, 1980s, and 1990s. Cost of a carious surface was estimated by conventional and complex methods. Real discount rates (4, 7 (base) and 10%) were utilized. With base-case assumptions, the average annual cost savings/person, using Australian dollars at the 2005 level, ranged from $56.41 (1970s) to $17.75 (1990s) (conventional method) and from $249.45 (1970s) to $69.86 (1990s) (complex method). Under worst-case assumptions fluoridation remained cost-effective with cost savings ranging from $24.15 (1970s) to $3.87 (1990s) (conventional method) and $107.85 (1970s) and $24.53 (1990s) (complex method). For 66+ years cohort (1990s) fluoridation did not show a cost saving, but costs/person were marginal. Community water fluoridation remains a cost-effective preventive measure in Australia.

Cost-effectiveness of Out-of-Hospital Continuous Positive Airway Pressure for Acute Respiratory Failure

PubMed Central

Thokala, Praveen; Goodacre, Steve; Ward, Matt; Penn-Ashman, Jerry; Perkins, Gavin D.

2015-01-01

Study objective We determine the cost-effectiveness of out-of-hospital continuous positive airway pressure (CPAP) compared with standard care for adults presenting to emergency medical services with acute respiratory failure. Methods We developed an economic model using a United Kingdom health care system perspective to compare the costs and health outcomes of out-of-hospital CPAP to standard care (inhospital noninvasive ventilation) when applied to a hypothetical cohort of patients with acute respiratory failure. The model assigned each patient a probability of intubation or death, depending on the patient’s characteristics and whether he or she had out-of-hospital CPAP or standard care. The patients who survived accrued lifetime quality-adjusted life-years (QALYs) and health care costs according to their age and sex. Costs were accrued through intervention and hospital treatment costs, which depended on patient outcomes. All results were converted into US dollars, using the Organisation for Economic Co-operation and Development purchasing power parities rates. Results Out-of-hospital CPAP was more effective than standard care but was also more expensive, with an incremental cost-effectiveness ratio of £20,514 per QALY ($29,720/QALY) and a 49.5% probability of being cost-effective at the £20,000 per QALY ($29,000/QALY) threshold. The probability of out-of-hospital CPAP’s being cost-effective at the £20,000 per QALY ($29,000/QALY) threshold depended on the incidence of eligible patients and varied from 35.4% when a low estimate of incidence was used to 93.8% with a high estimate. Variation in the incidence of eligible patients also had a marked influence on the expected value of sample information for a future randomized trial. Conclusion The cost-effectiveness of out-of-hospital CPAP is uncertain. The incidence of patients eligible for out-of-hospital CPAP appears to be the key determinant of cost-effectiveness. PMID:25737210

The safety and effectiveness of different methods of earwax removal: a systematic review and economic evaluation.

PubMed

Clegg, A J; Loveman, E; Gospodarevskaya, E; Harris, P; Bird, A; Bryant, J; Scott, D A; Davidson, P; Little, P; Coppin, R

2010-06-01

Build-up of earwax is a common reason for attendance in primary care. Current practice for earwax removal generally involves the use of a softening agent, followed by irrigation of the ear if required. However, the safety and benefits of the different methods of removal are not known for certain. To conduct evidence synthesis of the clinical effectiveness and cost-effectiveness of the interventions currently available for softening and/or removing earwax and any adverse events (AEs) associated with the interventions. Eleven electronic resources were searched from inception to November 2008, including: The Cochrane Library; MEDLINE (OVID), PREMEDLINE In-Process & Other Non-Indexed Citations (OVID), EMBASE (OVID); and CINAHL. Two reviewers screened titles and abstracts for eligibility. Inclusion criteria were applied to the full text or retrieved papers and data were extracted by two reviewers using data extraction forms developed a priori. Any differences were resolved by discussion or by a third reviewer. Study criteria included: interventions - all methods of earwax removal available and combinations of these methods; participants - adults/children presenting requiring earwax removal; outcomes - measures of hearing, adequacy of clearance of wax, quality of life, time to recurrence or further treatment, AEs and measures of cost-effectiveness; design - randomised controlled trials (RCTs) and controlled clinical trials (CCTs) for clinical effectiveness, cohort studies for AEs and cost-effectiveness, and costing studies for cost-effectiveness. For the economic evaluation, a deterministic decision tree model was developed to evaluate three options: (1) the use of softeners followed by irrigation in primary care; (2) softeners followed by self-irrigation; and (3) a 'no treatment' option. Outcomes were assessed in terms of benefits to patients and costs incurred, with costs presented by exploratory cost-utility analysis. Twenty-six clinical trials conducted in primary care (14 studies), secondary care (8 studies) or other care settings (4 studies), met the inclusion criteria for the review - 22 RCTs and 4 CCTs. The range of interventions included 16 different softeners, with or without irrigation, and in various different comparisons. Participants, outcomes, timing of intervention, follow-up and methodological quality varied between studies. On measures of wax clearance Cerumol, sodium bicarbonate, olive oil and water are all more effective than no treatment; triethanolamine polypeptide (TP) is better than olive oil; wet irrigation is better than dry irrigation; sodium bicarbonate drops followed by irrigation by nurse is more effective than sodium bicarbonate drops followed by self-irrigation; softening with TP and self-irrigation is more effective than self-irrigation only; and endoscopic de-waxing is better than microscopic de-waxing. AEs appeared to be minor and of limited extent. Resuts of the exploratory economic model found that softeners followed by self-irrigation were more likely to be cost-effective [24,433 pounds per quality-adjusted life-year (QALY)] than softeners followed by irrigation at primary care (32,130 pounds per QALY) when compared with no treatment. Comparison of the two active treatments showed that the additional gain associated with softeners followed by irrigation at primary care over softeners followed by self-irrigation was at a cost of 340,000 pounds per QALY. When compared over a lifetime horizon to the 'no treatment' option, the ICERs for softeners followed by self-irrigation and of softeners followed by irrigation at primary care were 24,450 pounds per QALY and 32,136 pounds per QALY, respectively. The systematic review found limited good-quality evidence of the safety, benefits and costs of the different strategies, making it difficult to differentiate between the various methods for removing earwax and rendering the economic evaluation as speculative. Although softeners are effective, which specific softeners are most effective remains uncertain. Evidence on the effectiveness of methods of irrigation or mechanical removal was equivocal. Further research is required to improve the evidence base, such as a RCT incorporating an economic evaluation to assess the different ways of providing the service, the effectiveness of the different methods of removal and the acceptability of the different approaches to patients and practitioners.

Cardiovascular disease prevention with a multidrug regimen in the developing world: a cost-effectiveness analysis

PubMed Central

Gaziano, Thomas A; Opie, Lionel H; Weinstein, Milton C

2008-01-01

Summary Background Cardiovascular disease is the leading cause of death, with 80% of cases occurring in developing countries. We therefore aimed to establish whether use of evidence-based multidrug regimens for patients at high risk for cardiovascular disease would be cost-effective in low-income and middle-income countries. Methods We used a Markov model to do a cost-effectiveness analysis with two combination regimens. For primary prevention, we used aspirin, a calcium-channel blocker, an angiotensin-converting-enzyme inhibitor, and a statin, and assessed them in four groups with different thresholds of absolute risks for cardiovascular disease. For secondary prevention, we assessed the same combination of drugs in one group, but substituted a β blocker for the calcium-channel blocker. To compare strategies, we report incremental cost-effectiveness ratios (ICER), in US$ per quality-adjusted life-year (QALY). Findings We recorded that preventive strategies could result in a 2-year gain in life expectancy. Across six developing World Bank regions, primary prevention yielded ICERs of US$746–890/QALY gained for patients with a 10-year absolute risk of cardiovascular disease greater than 25%, and $1039–1221/QALY gained for those with an absolute risk greater than 5%. ICERs for secondary prevention ranged from $306/QALY to $388/QALY gained. Interpretation Regimens of aspirin, two blood-pressure drugs, and a statin could halve the risk of death from cardiovascular disease in high-risk patients. This approach is cost-effective according to WHO recommendations, and is robust across several estimates of drug efficacy and of treatment cost. Developing countries should encourage the use of these inexpensive drugs that are currently available for both primary and secondary prevention. PMID:16920473

Achieving cost reductions in EOSDIS operations through technology evolution

NASA Technical Reports Server (NTRS)

Newsome, Penny; Moe, Karen; Harberts, Robert

1996-01-01

The earth observing system (EOS) data information system (EOSDIS) mission includes the cost-effective management and distribution of large amounts of data to the earth science community. The effect of the introduction of new information system technologies on the evolution of EOSDIS is considered. One of the steps taken by NASA to enable the introduction of new information system technologies into the EOSDIS is the funding of technology development through prototyping. Recent and ongoing prototyping efforts and their potential impact on the performance and cost-effectiveness of the EOSDIS are discussed. The technology evolution process as it related to the effective operation of EOSDIS is described, and methods are identified for the support of the transfer of relevant technology to EOSDIS components.

Impact assessment and cost-effectiveness of m-health application used by community health workers for maternal, newborn and child health care services in rural Uttar Pradesh, India: a study protocol.

PubMed

Prinja, Shankar; Nimesh, Ruby; Gupta, Aditi; Bahuguna, Pankaj; Thakur, Jarnail Singh; Gupta, Madhu; Singh, Tarundeep

2016-01-01

An m-health application has been developed and implemented with community health workers to improve their counseling in a rural area of India. The ultimate aim was to generate demand and improve utilization of key maternal, neonatal, and child health services. The present study aims to assess the impact and cost-effectiveness of this project. A pre-post quasi-experimental design with a control group will be used to undertake difference in differences analysis for assessing the impact of intervention. The Annual Health Survey (2011) will provide pre-intervention data, and a household survey will be carried out to provide post-intervention data.Two community development blocks where the intervention was introduced will be treated as intervention blocks while two controls blocks are selected after matching with intervention blocks on three indicators: average number of antenatal care checkups, percentage of women receiving three or more antenatal checkups, and percentage of institutional deliveries. Two categories of beneficiaries will be interviewed in both areas: women with a child between 29 days and 6 months and women with a child between 12 and 23 months. Propensity score matched samples from intervention and control areas in pre-post periods will be analyzed using the difference in differences method to estimate the impact of intervention in utilization of key services.Bottom-up costing methods will be used to assess the cost of implementing intervention. A decision model will estimate long-term effects of improved health services utilization on mortality, morbidity, and disability. Cost-effectiveness will be assessed in terms of incremental cost per disability-adjusted life year averted and cost per unit increase in composite service coverage in intervention versus control groups. The study will generate significant evidence on impact of the m-health intervention for maternal, neonatal, and child services and on the cost of scaling up m-health technology for accredited social health activists in India.

Joining Dissimilar Materials Using Friction Stir Scribe Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep

2016-10-03

Development of a robust and cost-effective method of joining dissimilar materials could provide a critical pathway to enable widespread use of multi-material designs and components in mainstream industrial applications. The use of multi-material components such as steel-aluminum and aluminum-polymer would allow design engineers to optimize material utilization based on service requirements and could often lead to weight and cost reductions. However, producing an effective joint between materials with vastly different thermal, microstructural, and deformation responses is highly problematic using conventional joining and/or fastening methods. This is especially challenging in cost sensitive, high volume markets that largely rely on low costmore » joining solutions. Friction stir scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like magnesium and aluminum to high temperature materials like steel and titanium. Viable joints between polymer composites and metal can also be made using this method. This paper will present the state of the art, progress made, and challenges associated with this innovative derivative of friction stir welding in reference to joining dissimilar metals and polymer/metal combinations.« less

Air-bridged Ohmic contact on vertically aligned si nanowire arrays: application to molecule sensors.

PubMed

Han, Hee; Kim, Jungkil; Shin, Ho Sun; Song, Jae Yong; Lee, Woo

2012-05-02

A simple, cost-effective, and highly reliable method for constructing an air-bridged electrical contact on large arrays of vertically aligned nanowires was developed. The present method may open up new opportunities for developing advanced nanowire-based devices for energy harvest and storage, power generation, and sensing applications. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cost-effectiveness of Recruitment Methods in an Obesity Prevention Trial for Young Children

PubMed Central

Robinson, Jodie L.; Fuerch, Janene H.; Winiewicz, Dana D.; Salvy, Sarah J.; Roemmich, James N.; Epstein, Leonard H.

2007-01-01

Background Recruitment of participants for clinical trials requires considerable effort and cost. There is no research on the cost-effectiveness of recruitment methods for an obesity prevention trial of young children. Methods This study determined the cost-effectiveness of recruiting 70 families with a child aged 4 to 7 (5.9 ± 1.3) years in Western New York from February, 2003 to November, 2004, for a two year randomized obesity prevention trial to reduce television watching in the home. Results Of the 70 randomized families, 65.7% (n = 46) were obtained through direct mailings, 24.3% (n = 17) were acquired through newspaper advertisements, 7.1 % (n = 5) from other sources (e.g. word of mouth), and 2.9% (n = 2) through posters and brochures. Costs of each recruitment method were computed by adding the cost of materials, staff time, and media expenses. Cost-effectiveness (money spent per randomized participant) was US $0 for other sources, US $227.76 for direct mailing, US $546.95 for newspaper ads, and US $3,020.84 for posters and brochures. Conclusion Of the methods with associated costs, direct mailing was the most cost effective in recruiting families with young children, which supports the growing literature of the effectiveness of direct mailing. PMID:17475318

Exploring 3D Human Action Recognition: from Offline to Online.

PubMed

Liu, Zhenyu; Li, Rui; Tan, Jianrong

2018-02-20

With the introduction of cost-effective depth sensors, a tremendous amount of research has been devoted to studying human action recognition using 3D motion data. However, most existing methods work in an offline fashion, i.e., they operate on a segmented sequence. There are a few methods specifically designed for online action recognition, which continually predicts action labels as a stream sequence proceeds. In view of this fact, we propose a question: can we draw inspirations and borrow techniques or descriptors from existing offline methods, and then apply these to online action recognition? Note that extending offline techniques or descriptors to online applications is not straightforward, since at least two problems-including real-time performance and sequence segmentation-are usually not considered in offline action recognition. In this paper, we give a positive answer to the question. To develop applicable online action recognition methods, we carefully explore feature extraction, sequence segmentation, computational costs, and classifier selection. The effectiveness of the developed methods is validated on the MSR 3D Online Action dataset and the MSR Daily Activity 3D dataset.

Exploring 3D Human Action Recognition: from Offline to Online

PubMed Central

Li, Rui; Liu, Zhenyu; Tan, Jianrong

2018-01-01

With the introduction of cost-effective depth sensors, a tremendous amount of research has been devoted to studying human action recognition using 3D motion data. However, most existing methods work in an offline fashion, i.e., they operate on a segmented sequence. There are a few methods specifically designed for online action recognition, which continually predicts action labels as a stream sequence proceeds. In view of this fact, we propose a question: can we draw inspirations and borrow techniques or descriptors from existing offline methods, and then apply these to online action recognition? Note that extending offline techniques or descriptors to online applications is not straightforward, since at least two problems—including real-time performance and sequence segmentation—are usually not considered in offline action recognition. In this paper, we give a positive answer to the question. To develop applicable online action recognition methods, we carefully explore feature extraction, sequence segmentation, computational costs, and classifier selection. The effectiveness of the developed methods is validated on the MSR 3D Online Action dataset and the MSR Daily Activity 3D dataset. PMID:29461502

Annual Report, Fall 2016: Identifying Cost Effective Tank Waste Characterization Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reboul, S. H.; DiPrete, D. P.

2016-12-12

This report documents the activities that were performed during the second year of a project undertaken to improve the cost effectiveness and timeliness of SRNL’s tank closure characterization practices. The activities performed during the first year of the project were previously reported in SRNL-STI-2015-00144. The scope of the second year activities was divided into the following three primary tasks: 1) develop a technical basis and strategy for improving the cost effectiveness and schedule of SRNL’s tank closure characterization program; 2) initiate the design and assembly of a new waste removal system for improving the throughput and reducing the personnel dosemore » associated with extraction chromatography radiochemical separations; and 3) develop and perform feasibility testing of three alternative radiochemical separation protocols holding promise for improving high resource demand/time consuming tank closure sample analysis methods.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysismore » of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Using discrete choice experiments within a cost-benefit analysis framework: some considerations.

PubMed

McIntosh, Emma

2006-01-01

A great advantage of the stated preference discrete choice experiment (SPDCE) approach to economic evaluation methodology is its immense flexibility within applied cost-benefit analyses (CBAs). However, while the use of SPDCEs in healthcare has increased markedly in recent years there has been a distinct lack of equivalent CBAs in healthcare using such SPDCE-derived valuations. This article outlines specific issues and some practical suggestions for consideration relevant to the development of CBAs using SPDCE-derived benefits. The article shows that SPDCE-derived CBA can adopt recent developments in cost-effectiveness methodology including the cost-effectiveness plane, appropriate consideration of uncertainty, the net-benefit framework and probabilistic sensitivity analysis methods, while maintaining the theoretical advantage of the SPDCE approach. The concept of a cost-benefit plane is no different in principle to the cost-effectiveness plane and can be a useful tool for reporting and presenting the results of CBAs.However, there are many challenging issues to address for the advancement of CBA methodology using SPCDEs within healthcare. Particular areas for development include the importance of accounting for uncertainty in SPDCE-derived willingness-to-pay values, the methodology of SPDCEs in clinical trial settings and economic models, measurement issues pertinent to using SPDCEs specifically in healthcare, and the importance of issues such as consideration of the dynamic nature of healthcare and the resulting impact this has on the validity of attribute definitions and context.

An Ensemble Approach for Drug Side Effect Prediction

PubMed Central

Jahid, Md Jamiul; Ruan, Jianhua

2014-01-01

In silico prediction of drug side-effects in early stage of drug development is becoming more popular now days, which not only reduces the time for drug design but also reduces the drug development costs. In this article we propose an ensemble approach to predict drug side-effects of drug molecules based on their chemical structure. Our idea originates from the observation that similar drugs have similar side-effects. Based on this observation we design an ensemble approach that combine the results from different classification models where each model is generated by a different set of similar drugs. We applied our approach to 1385 side-effects in the SIDER database for 888 drugs. Results show that our approach outperformed previously published approaches and standard classifiers. Furthermore, we applied our method to a number of uncharacterized drug molecules in DrugBank database and predict their side-effect profiles for future usage. Results from various sources confirm that our method is able to predict the side-effects for uncharacterized drugs and more importantly able to predict rare side-effects which are often ignored by other approaches. The method described in this article can be useful to predict side-effects in drug design in an early stage to reduce experimental cost and time. PMID:25327524

48 CFR 3452.216-70 - Additional cost principles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... practice is to treat these costs by some other method, they may be accepted if they are found to be reasonable and equitable. Bid and proposal costs do not include independent research and development costs or pre-award costs. (b) Independent research and development costs. Independent research and development...

USEPA Approach for the Detection and Quantification of Enterococcus by qPCR

EPA Science Inventory

The Beach Act 2000 specified that EPA should develop: Appropriate and effective indicators for improviding detection in a timely manner of pathogens in coastal waters Appropriate, accurate, expeditious and cost-effective methods for the timely detection of pathogens in coas...

AOP-informed assessment of endocrine disruption in freshwater crustaceans

EPA Science Inventory

To date, most research focused on developing more efficient and cost effective methods to predict toxicity have focused on human biology. However, there is also a need for effective high throughput tools to predict toxicity to other species that perform critical ecosystem functio...

Assessing the Social and Environmental Costs of Institutional Nitrogen Footprints.

EPA Science Inventory

Background/Question/Methods: Release of N to air, land and water has a host of effects on human health, ecosystems and the economy, many of which scientists and economists are just beginning to develop methods to quantify. In order to understand the broader connections to sustai...

Breakthrough: Better Fiber for Better Products

ScienceCinema

Griffith, George; Garnier, John

2018-01-08

Researchers at Idaho National Laboratory have developed a cost-effective method for the continuous production of alpha silicon carbide fiber. The exceptionally strong, lightweight fiber could enable significant performance improvements in many everyday products.

A System to Create Training Systems

ERIC Educational Resources Information Center

Training in Business and Industry, 1971

1971-01-01

This article describes Kodak's procedure for analyzing, developing and pretesting training programs through its Marketing Education Center. Included is a case history of the application of the method which greatly affects cost effectiveness. (RR)

Development of Advanced Life Cycle Costing Methods for Technology Benefit/Cost/Risk Assessment

NASA Technical Reports Server (NTRS)

Yackovetsky, Robert (Technical Monitor)

2002-01-01

The overall objective of this three-year grant is to provide NASA Langley's System Analysis Branch with improved affordability tools and methods based on probabilistic cost assessment techniques. In order to accomplish this objective, the Aerospace Systems Design Laboratory (ASDL) needs to pursue more detailed affordability, technology impact, and risk prediction methods and to demonstrate them on variety of advanced commercial transports. The affordability assessment, which is a cornerstone of ASDL methods, relies on the Aircraft Life Cycle Cost Analysis (ALCCA) program originally developed by NASA Ames Research Center and enhanced by ASDL. This grant proposed to improve ALCCA in support of the project objective by updating the research, design, test, and evaluation cost module, as well as the engine development cost module. Investigations into enhancements to ALCCA include improved engine development cost, process based costing, supportability cost, and system reliability with airline loss of revenue for system downtime. A probabilistic, stand-alone version of ALCCA/FLOPS will also be developed under this grant in order to capture the uncertainty involved in technology assessments. FLOPS (FLight Optimization System program) is an aircraft synthesis and sizing code developed by NASA Langley Research Center. This probabilistic version of the coupled program will be used within a Technology Impact Forecasting (TIF) method to determine what types of technologies would have to be infused in a system in order to meet customer requirements. A probabilistic analysis of the CER's (cost estimating relationships) within ALCCA will also be carried out under this contract in order to gain some insight as to the most influential costs and the impact that code fidelity could have on future RDS (Robust Design Simulation) studies.

Costing behavioral interventions: a practical guide to enhance translation.

PubMed

Ritzwoller, Debra P; Sukhanova, Anna; Gaglio, Bridget; Glasgow, Russell E

2009-04-01

Cost and cost effectiveness of behavioral interventions are critical parts of dissemination and implementation into non-academic settings. Due to the lack of indicative data and policy makers' increasing demands for both program effectiveness and efficiency, cost analyses can serve as valuable tools in the evaluation process. To stimulate and promote broader use of practical techniques that can be used to efficiently estimate the implementation costs of behavioral interventions, we propose a set of analytic steps that can be employed across a broad range of interventions. Intervention costs must be distinguished from research, development, and recruitment costs. The inclusion of sensitivity analyses is recommended to understand the implications of implementation of the intervention into different settings using different intervention resources. To illustrate these procedures, we use data from a smoking reduction practical clinical trial to describe the techniques and methods used to estimate and evaluate the costs associated with the intervention. Estimated intervention costs per participant were $419, with a range of $276 to $703, depending on the number of participants.

Multicomponent targeted intervention to prevent delirium in hospitalized older patients: what is the economic value?

PubMed

Rizzo, J A; Bogardus , S T; Leo-Summers, L; Williams, C S; Acampora, D; Inouye, S K

2001-07-01

Delirium, or acute confusional state, is a common and serious occurrence among hospitalized older persons. Current estimates suggest that delirium complicates hospital stays for more than 2.3 million older persons each year, involving more than 17.5 million hospital days and accounting for more than $4 billion (1994 dollars) of Medicare expenditures. A 40% reduction was recently reported in the risk for delirium among hospitalized older persons receiving a multicomponent targeted risk factor intervention (MTI) strategy to prevent delirium, compared with subjects receiving usual hospital care.1 Before recommending that this preventive strategy be implemented in clinical practice, however, the cost implications must be thoroughly examined as well. The present analysis performs net cost evaluations of the MTI for the prevention of delirium among hospitalized patients. Hospital charge and cost-to-charge ratio data are linked to a database of 852 subjects, who were treated with MTI or usual care. Multivariable regression methods were used to help isolate the impact of MTI on hospital costs. These results were then combined with our earlier work on the impact of the MTI on delirium prevention to assess the cost effectiveness of this intervention. The MTI significantly reduced nonintervention costs among subjects at intermediate risk for developing delirium, but not among subjects at high risk. When MTI intervention costs were included, MTI had no significant effect on overall health care costs in the intermediate risk cohort, but raised overall costs in the high risk group. Because the MTI prevented delirium in the intermediate risk group without raising costs, the conclusion reached is that it is a cost effective treatment option for patients at intermediate risk for developing delirium. In contrast, the results suggest that the MTI is not cost effective for subjects at high risk.

Improving environmental impact and cost assessment for supplier evaluation

NASA Astrophysics Data System (ADS)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

New catalysts for coal liquefaction and new nanocrystalline catalysts synthesis methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linehan, J.C.; Matson, D.W.; Darab, J.G.

1994-09-01

The use of coal as a source of transportation fuel is currently economically unfavorable due to an abundant world petroleum supply and the relatively high cost of coal liquefaction. Consequently, a reduction in the cost of coal liquefaction, for example by using less and/or less costly catalysts or lower liquefaction temperatures, must be accomplished if coal is to play an significant role as a source of liquid feedstock for the petrochemical industry. The authors and others have investigated the applicability of using inexpensive iron-based catalysts in place of more costly and environmentally hazardous metal catalysts for direct coal liquefaction. Iron-basedmore » catalysts can be effective in liquefying coal and in promoting carbon-carbon bond cleavage in model compounds. The authors have been involved in an ongoing effort to develop and optimize iron-based powders for use in coal liquefaction and related petrochemical applications. Research efforts in this area have been directed at three general areas. The authors have explored ways to optimize the effectiveness of catalyst precursor species through use of nanocrystalline materials and/or finely divided powders. In this effort, the authors have developed two new nanophase material production techniques, Modified Reverse Micelle (MRM) and the Rapid Thermal Decomposition of precursors in Solution (RTDS). A second effort has been aimed at optimizing the effectiveness of catalysts by variations in other factors. To this, the authors have investigated the effect that the crystalline phase has on the capacity of iron-based oxide and oxyhydroxide powders to be effectively converted to an active catalyst phase under liquefaction conditions. And finally, the authors have developed methods to produce active catalyst precursor powders in quantities sufficient for pilot-scale testing. Major results in these three areas are summarized.« less

Developing Rapid and Cost-Effective Tools for Assessing Groundwater Impacts on Contaminated Sediments

EPA Science Inventory

This research developed quick and inexpensive methods that can be useful in characterizing the interaction of water and solids within the GW/SW transition zone to explain processes that occur during physical contact between groundwater and sediments. The research used self-conta...

Simulation of OSCM Concepts for HQ SACT

DTIC Science & Technology

2007-06-01

effective method for creating understanding, identifying problems and developing solutions. • Simulation of a goal driven organization is a cost...effective method to visualize some aspects of the problem space Toolbox • The team used Extend™, a COTS product from Imagine That!® (http...Nations flow Model OSCM ATARES flow Batching A/C & Pallets Model ISAF Airbridge flow Flying and unbatching A/C Fleet Create resources Calculate flight

Incorporating considerations of cost-effectiveness, affordability, and resource implications in guideline development: article 6 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

PubMed

Hill, Suzanne R; Olson, Leslie G; Falck-Ytter, Yngve; Cruz, Alvaro A; Atkins, David; Baumann, Michael; Jaeschke, Roman; Woitalla, Thomas; Schünemann, Holger J

2012-12-01

Professional societies, like many other organizations around the world, have recognized the need to use rigorous processes to ensure that health care recommendations are based on the best available research evidence. This is the sixth of a series of 14 articles prepared to advise guideline developers for respiratory and other diseases on how to achieve this goal. In this article, we focused on integrating cost and resource information in guideline development and formulating recommendations focusing on four key questions. We addressed the following specific questions. (1) When is it important to incorporate costs, and/or resource implications, and/or cost-effectiveness, and/or affordability considerations in guidelines? (2) Which costs and which resource use should be considered in guidelines? (3)What sources of evidence should be used to estimate costs, resource use, and cost-effectiveness? (4) How can cost-effectiveness, resource implications, and affordability be taken into account explicitly? Our work was based on a prior review on this topic and our conclusions are based on available evidence, consideration of what guideline developers are doing, and workshop discussions. Many authorities suggest that there is a need to include explicit consideration of costs, resource use, and affordability during guideline development. Where drug use is at issue, "explicit consideration" may need to involve only noting whether the price (easily determined and usually the main component of "acquisition cost") of a drug is high or low. Complex interventions such as rehabilitation services are to a greater degree setting- and system-dependent. Resources used, and the costs of those resources, will vary among systems, and formal identification by a guideline group of the resource requirements of a complex intervention is essential. A clinical guideline usually contains multiple recommendations, and in some cases there are hundreds. Defining costs and resource use for all of them-especially for multiple settings-is unlikely to be feasible. At present, disaggregated resource utilization accompanied by some cost information seems to be the most promising approach. The method for assigning values to costs, including external or indirect cost (such as time off work), can have a significant impact on the outcome of any economic evaluation. The perspective that the guideline assumes should be made explicit. Standards for evidence for clinical data are usually good-quality trials reporting a relevant endpoint that should be summarized in a systematic review. Like others, we are therefore proposing that the ideal sources of evidence for cost and resource utilization data for guideline development are systematic reviews of randomized controlled trials that report resource utilization, with direct comparisons between the interventions of interest.

Can CER be an effective tool for change in the development and assessment of new drugs and technologies?

PubMed

Brixner, Diana I; Watkins, John B

2012-06-01

Comparative effectiveness research (CER) has been proposed in the United States as a way to compare new drugs and technologies with established alternatives and determine not just whether a therapy works, but how well it works compared to other options. To define the current use of CER in the development of new drugs and technologies and explore what is needed for this research approach to reduce or stabilize health care costs in the United States. In 2010, the Patient-Centered Outcomes Research Institute (PCORI) was established by the Patient Protection and Affordable Care Act (PPACA) to coordinate federally funded CER and recommend research priorities. Hochman and McCormick's (2010) evaluation of 328 randomized trials, observational studies, and meta-analyses involving medications published between June 2008 and September 2009 in 6 key journals showed that most published research did not fulfill the criteria of CER (defined as comparison to active treatment) and that most study design is driven by FDA requirements rather than the need to develop evidence to facilitates election of the most effective therapy. Since PPACA provides alternative funding for CER, it could encourage funding more studies to help determine which treatment delivers the best value per unit of investment from clinical, humanistic, and economic perspectives. Manufacturers may avoid CER because it increases product development costs, but a drug proven more effective is more likely to be accepted by formulary committees, increasing the drug's market share, whereas payers may reject or limit use of a new drug that performs less effectively in comparative studies. CER may not directly reduce expenditures for drugs and medical technologies. The results may vary widely from case to case; however, despite often significantly higher prices for new drugs, it is important to look beyond product costs to the overall impact on health care costs, including medical cost offsets that may occur through improved health or decreased morbidity. To truly decrease cost and improve quality, cost-effectiveness will have to be integrated into CER with the objective of prioritizing efficient therapies in the real-world health care system. If the methods and output of CER improve, the resulting cost-effectiveness ratios will also be more useful to the payer. CER should ultimately, therefore, be a useful tool to help patients, providers, and decision makers provide the most effective and most cost-effective interventions.

Modular Laboratories—Cost-Effective and Sustainable Infrastructure for Resource-Limited Settings

PubMed Central

Bridges, Daniel J.; Colborn, James; Chan, Adeline S. T.; Winters, Anna M.; Dengala, Dereje; Fornadel, Christen M.; Kosloff, Barry

2014-01-01

High-quality laboratory space to support basic science, clinical research projects, or health services is often severely lacking in the developing world. Moreover, the construction of suitable facilities using traditional methods is time-consuming, expensive, and challenging to implement. Three real world examples showing how shipping containers can be converted into modern laboratories are highlighted. These include use as an insectary, a molecular laboratory, and a BSL-3 containment laboratory. These modular conversions have a number of advantages over brick and mortar construction and provide a cost-effective and timely solution to offer high-quality, user-friendly laboratory space applicable within the developing world. PMID:25223943

Consolidation of graphite thermoplastic textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Mahon, J.

1991-01-01

The use of innovative cost effective material forms and processes is being considered for fabrication of future primary aircraft structures. Processes that have been identified as meeting these goals are textile preforms that use resin transfer molding (RTM) and consolidation forming. The Novel Composites for Wing and Fuselage Applications (NCWFA) program has as its objective the integration of innovative design concepts with cost effective fabrication processes to develop damage-tolerant structures that can perform at a design ultimate strain level of 6000 micro-inch/inch. In this on-going effort, design trade studies were conducted to arrive at advanced wing designs that integrate new material forms with innovative structural concepts and cost effective fabrication methods. The focus has been on minimizing part count (mechanical fasteners, clips, number of stiffeners, etc.), by using cost effective textile reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low-cost resin transfer molding processing, and thermoplastic forming concepts. The fabrication of representative Y spars by consolidation methods will be described. The Y spars were fabricated using AS4 (6K)/PEEK 150g commingled angle interlock 0/90-degree woven preforms with +45-degree commingled plies stitched using high strength Toray carbon thread and processed by autoclave consolidation.

Developing and testing a cost data collection instrument for noncommunicable disease registry planning.

PubMed

Subramanian, Sujha; Tangka, Florence; Edwards, Patrick; Hoover, Sonja; Cole-Beebe, Maggie

2016-12-01

This article reports on the methods and framework we have developed to guide economic evaluation of noncommunicable disease registries. We developed a cost data collection instrument, the Centers for Disease Control and Prevention's (CDC's) International Registry Costing Tool (IntRegCosting Tool), based on established economics methods We performed in-depth case studies, site visit interviews, and pilot testing in 11 registries from multiple countries including India, Kenya, Uganda, Colombia, and Barbados to assess the overall quality of the data collected from cancer and cardiovascular registries. Overall, the registries were able to use the IntRegCosting Tool to assign operating expenditures to specific activities. We verified that registries were able to provide accurate estimation of labor costs, which is the largest expenditure incurred by registries. We also identified several factors that can influence the cost of registry operations, including size of the geographic area served, data collection approach, local cost of living, presence of rural areas, volume of cases, extent of consolidation of records to cases, and continuity of funding. Internal and external registry factors reveal that a single estimate for the cost of registry operations is not feasible; costs will vary on the basis of factors that may be beyond the control of the registries. Some factors, such as data collection approach, can be modified to improve the efficiency of registry operations. These findings will inform both future economic data collection using a web-based tool and cost and cost-effectiveness analyses of registry operations in low- and middle-income countries (LMICs) and other locations with similar characteristics. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Multifaceted Intervention to Improve the Quality of Care of Children in District Hospitals in Kenya: A Cost-Effectiveness Analysis

PubMed Central

Barasa, Edwine W.; Ayieko, Philip; Cleary, Susan; English, Mike

2012-01-01

Background To improve care for children in district hospitals in Kenya, a multifaceted approach employing guidelines, training, supervision, feedback, and facilitation was developed, for brevity called the Emergency Triage and Treatment Plus (ETAT+) strategy. We assessed the cost effectiveness of the ETAT+ strategy, in Kenyan hospitals. Further, we estimate the costs of scaling up the intervention to Kenya nationally and potential cost effectiveness at scale. Methods and Findings Our cost-effectiveness analysis from the provider's perspective used data from a previously reported cluster randomized trial comparing the full ETAT+ strategy (n = 4 hospitals) with a partial intervention (n = 4 hospitals). Effectiveness was measured using 14 process measures that capture improvements in quality of care; their average was used as a summary measure of quality. Economic costs of the development and implementation of the intervention were determined (2009 US$). Incremental cost-effectiveness ratios were defined as the incremental cost per percentage improvement in (average) quality of care. Probabilistic sensitivity analysis was used to assess uncertainty. The cost per child admission was US$50.74 (95% CI 49.26–67.06) in intervention hospitals compared to US$31.1 (95% CI 30.67–47.18) in control hospitals. Each percentage improvement in average quality of care cost an additional US$0.79 (95% CI 0.19–2.31) per admitted child. The estimated annual cost of nationally scaling up the full intervention was US$3.6 million, approximately 0.6% of the annual child health budget in Kenya. A “what-if” analysis assuming conservative reductions in mortality suggests the incremental cost per disability adjusted life year (DALY) averted by scaling up would vary between US$39.8 and US$398.3. Conclusion Improving quality of care at scale nationally with the full ETAT+ strategy may be affordable for low income countries such as Kenya. Resultant plausible reductions in hospital mortality suggest the intervention could be cost-effective when compared to incremental cost-effectiveness ratios of other priority child health interventions. Please see later in the article for the Editors' Summary PMID:22719233

[A future image of clinical inspection from health economics].

PubMed

Kakihara, Hiroaki

2006-06-01

Do you let medical costs increase in proportion to the growth rate of GDP? A way of thinking of the Council on Economic and Fiscal Policy. Should we exclude public medical insurance? It is not a problem, it is an absolute sum if you are effective. If there is no insurance, and individuals pay the total amount, there is no problem, but it is impossible. Economic development will cease if there is no insurance. As medical personnel, to offer good medical care with an appropriate cost. An appeal to the nation is necessary. Economic technical evaluation to identify a cheap method for each clinical inspection. Does medical insurance have a deficit? I. Japanese Health insurance system. (1) Health insurance union. When you look at the contribution money, it is originally 2,479,800,000,000 yen, with premium income and a profit of 45%. (2) Government management health insurance. When you look at the contribution money, it is originally 2,163,300,000,000 yen, with premium income and a profit of 36%. (1) + (2) Employed insurance meter. (3) Mutual aid. (4) National Health Insurance. II. A clinical economic method. III. Expense of medical care and its effect. A. Expense. B. A medical economic technical evaluation method. 1. Cost-effectiveness analysis CEA. 2. Cost utility analysis CUA. 3. Cost-benefit analysis CBA. 4. Expense minimization analysis.

A required course in the development, implementation, and evaluation of clinical pharmacy services.

PubMed

Skomo, Monica L; Kamal, Khalid M; Berdine, Hildegarde J

2008-10-15

To develop, implement, and assess a required pharmacy practice course to prepare pharmacy students to develop, implement, and evaluate clinical pharmacy services using a business plan model. Course content centered around the process of business planning and pharmacoeconomic evaluations. Selected business planning topics included literature evaluation, mission statement development, market evaluation, policy and procedure development, and marketing strategy. Selected pharmacoeconomic topics included cost-minimization analysis, cost-benefit analysis, cost-effectiveness analysis, cost-utility analysis, and health-related quality of life (HRQoL). Assessment methods included objective examinations, student participation, performance on a group project, and peer evaluation. One hundred fifty-three students were enrolled in the course. The mean scores on the objective examinations (100 points per examination) ranged from 82 to 85 points, with 25%-35% of students in the class scoring over 90, and 40%-50% of students scoring from 80 to 89. The mean scores on the group project (200 points) and classroom participation (50 points) were 183.5 and 46.1, respectively. The mean score on the peer evaluation was 30.8, with scores ranging from 27.5 to 31.7. The course provided pharmacy students with the framework necessary to develop and implement evidence-based disease management programs and to assure efficient, cost-effective utilization of pertinent resources in the provision of patient care.

A Required Course in the Development, Implementation, and Evaluation of Clinical Pharmacy Services

PubMed Central

Kamal, Khalid M.; Berdine, Hildegarde J.

2008-01-01

Objective To develop, implement, and assess a required pharmacy practice course to prepare pharmacy students to develop, implement, and evaluate clinical pharmacy services using a business plan model. Design Course content centered around the process of business planning and pharmacoeconomic evaluations. Selected business planning topics included literature evaluation, mission statement development, market evaluation, policy and procedure development, and marketing strategy. Selected pharmacoeconomic topics included cost-minimization analysis, cost-benefit analysis, cost-effectiveness analysis, cost-utility analysis, and health-related quality of life (HRQoL). Assessment methods included objective examinations, student participation, performance on a group project, and peer evaluation. Assessment One hundred fifty-three students were enrolled in the course. The mean scores on the objective examinations (100 points per examination) ranged from 82 to 85 points, with 25%-35% of students in the class scoring over 90, and 40%-50% of students scoring from 80 to 89. The mean scores on the group project (200 points) and classroom participation (50 points) were 183.5 and 46.1, respectively. The mean score on the peer evaluation was 30.8, with scores ranging from 27.5 to 31.7. Conclusion The course provided pharmacy students with the framework necessary to develop and implement evidence-based disease management programs and to assure efficient, cost-effective utilization of pertinent resources in the provision of patient care. PMID:19214263

The economic value of contraception: a comparison of 15 methods.

PubMed Central

Trussell, J; Leveque, J A; Koenig, J D; London, R; Borden, S; Henneberry, J; LaGuardia, K D; Stewart, F; Wilson, T G; Wysocki, S

1995-01-01

OBJECTIVES. The purpose of the study was to determine the clinical and economic impact of alternative contraceptive methods. METHODS. Direct medical costs (method use, side effects, and unintended pregnancies) associated with 15 contraceptive methods were modeled from the perspectives of a private payer and a publicly funded program. Cost data were drawn from a national claims database and MediCal. The main outcome measures included 1-year and 5-year costs and number of pregnancies avoided compared with use of no contraceptive method. RESULTS. All 15 contraceptives were more effective and less costly than no method. Over 5 years, the copper-T IUD, vasectomy, the contraceptive implant, and the injectable contraceptive were the most cost-effective, saving $14,122, $13,899, $13,813, and $13,373, respectively, and preventing approximately the same number of pregnancies (4.2) per person. Because of their high failure rates, barrier methods, spermicides, withdrawal, and periodic abstinence were costly but still saved from $8933 to $12,239 over 5 years. Oral contraceptives fell between these groups, costing $1784 over 5 years, saving $12,879, and preventing 4.1 pregnancies. CONCLUSIONS. Contraceptives save health care resources by preventing unintended pregnancies. Up-front acquisition costs are inaccurate predictors of the total economic costs of competing contraceptive methods. Images FIGURE 1 FIGURE 2 PMID:7702112

Using mobile electronic devices to deliver educational resources in developing countries.

PubMed

Mazal, Jonathan Robert; Ludwig, Rebecca

2015-01-01

Developing countries have far fewer trained radiography professionals than developed countries, which exacerbates the limited access to imaging services. The lack of trained radiographers reflects, in part, limited availability of radiographer-specific educational resources. Historically, organizations that provided such resources in the developing world faced challenges related to the limited stock of current materials as well as expenses associated with shipping and delivery. Four mobile electronic devices (MEDs) were loaded with educational content (e-books, PDFs, and digital applications) spanning major radiography topics. The MEDs were distributed to 4 imaging departments in Ghana, India, Nepal, and Nigeria based on evidence of need for radiography-specific resources, as revealed by survey responses. A cost comparison of postal delivery vs digital delivery of educational content was performed. The effectiveness of delivering additional content via Wi-Fi transmission also was evaluated. Feedback was solicited on users' experience with the MEDs as a delivery tool for educational content. An initial average per e-book expense of $30.05, which included the cost of the device, was calculated for the MED delivery method compared with $15.56 for postal delivery of printed materials. The cost of the MED delivery method was reduced to an average of $10.05 for subsequent e-book deliveries. Additional content was successfully delivered via Wi-Fi transmission to all recipients during the 3-month follow-up period. Overall user feedback on the experience was positive, and ideas for enhancing the MED-based method were identified. Using MEDs to deliver radiography-specific educational content appears to be more cost effective than postal delivery of printed materials on a long-term basis. MEDs are more efficient for providing updates to educational materials. Customization of content to department needs, and using projector devices could enhance the usefulness of MEDs for radiographer training.

What Pertussis Mortality Rates Make Maternal Acellular Pertussis Immunization Cost-Effective in Low- and Middle-Income Countries? A Decision Analysis

PubMed Central

Russell, Louise B.; Pentakota, Sri Ram; Toscano, Cristiana Maria; Cosgriff, Ben; Sinha, Anushua

2016-01-01

Background. Despite longstanding infant vaccination programs in low- and middle-income countries (LMICs), pertussis continues to cause deaths in the youngest infants. A maternal monovalent acellular pertussis (aP) vaccine, in development, could prevent many of these deaths. We estimated infant pertussis mortality rates at which maternal vaccination would be a cost-effective use of public health resources in LMICs. Methods. We developed a decision model to evaluate the cost-effectiveness of maternal aP immunization plus routine infant vaccination vs routine infant vaccination alone in Bangladesh, Nigeria, and Brazil. For a range of maternal aP vaccine prices, one-way sensitivity analyses identified the infant pertussis mortality rates required to make maternal immunization cost-effective by alternative benchmarks ($100, 0.5 gross domestic product [GDP] per capita, and GDP per capita per disability-adjusted life-year [DALY]). Probabilistic sensitivity analysis provided uncertainty intervals for these mortality rates. Results. Infant pertussis mortality rates necessary to make maternal aP immunization cost-effective exceed the rates suggested by current evidence except at low vaccine prices and/or cost-effectiveness benchmarks at the high end of those considered in this report. For example, at a vaccine price of $0.50/dose, pertussis mortality would need to be 0.051 per 1000 infants in Bangladesh, and 0.018 per 1000 in Nigeria, to cost 0.5 per capita GDP per DALY. In Brazil, a middle-income country, at a vaccine price of $4/dose, infant pertussis mortality would need to be 0.043 per 1000 to cost 0.5 per capita GDP per DALY. Conclusions. For commonly used cost-effectiveness benchmarks, maternal aP immunization would be cost-effective in many LMICs only if the vaccine were offered at less than $1–$2/dose. PMID:27838677

Analyses of Blood Bank Efficiency, Cost-Effectiveness and Quality

NASA Astrophysics Data System (ADS)

Lam, Hwai-Tai Chen

In view of the increasing costs of hospital care, it is essential to investigate methods to improve the labor efficiency and the cost-effectiveness of the hospital technical core in order to control costs while maintaining the quality of care. This study was conducted to develop indices to measure efficiency, cost-effectiveness, and the quality of blood banks; to identify factors associated with efficiency, cost-effectiveness, and quality; and to generate strategies to improve blood bank labor efficiency and cost-effectiveness. Indices developed in this study for labor efficiency and cost-effectiveness were not affected by patient case mix and illness severity. Factors that were associated with labor efficiency were identified as managerial styles, and organizational designs that balance workload and labor resources. Medical directors' managerial involvement was not associated with labor efficiency, but their continuing education and specialty in blood bank were found to reduce the performance of unnecessary tests. Surprisingly, performing unnecessary tests had no association with labor efficiency. This suggested the existence of labor slack in blood banks. Cost -effectiveness was associated with workers' benefits, wages, and the production of high-end transfusion products by hospital-based donor rooms. Quality indices used in this study included autologous transfusion rates, platelet transfusion rates, and the check points available in an error-control system. Because the autologous transfusion rate was related to patient case mix, severity of illness, and possible inappropriate transfusion, it was not recommended to be used for quality index. Platelet-pheresis transfusion rates were associated with the transfusion preferences of the blood bank medical directors. The total number of check points in an error -control system was negatively associated with government ownership and workers' experience. Recommendations for improving labor efficiency and cost-effectiveness were focused on an incentive system that encourages team effort, and the use of appropriate measurements for laboratory efficiency and operational system designs.

A practical, cost-effective method for recruiting people into healthy eating behavior programs.

PubMed

McDonald, Paul W

2007-04-01

The population impact of programs designed to develop healthy eating behaviors is limited by the number of people who use them. Most public health providers and researchers rely on purchased mass media, which can be expensive, on public service announcements, or clinic-based recruitment, which can have limited reach. Few studies offer assistance for selecting high-outreach and low-cost strategies to promote healthy eating programs. The purpose of this study was 1) to determine whether classified newspaper advertising is an effective and efficient method of recruiting participants into a healthy eating program and 2) to determine whether segmenting messages by transtheoretical stage of change would help engage individuals at all levels of motivation to change their eating behavior. For 5 days in 1997, three advertisements corresponding to different stages of change were placed in a Canadian newspaper with a daily circulation of 75,000. There were 282 eligible people who responded to newspaper advertisements, and the cost was Can $1.11 (U.S. $0.72) per recruit. This cost compares favorably with the cost efficiency of mass media, direct mail, and other common promotional methods. Message type was correlated with respondent's stage of change, and this correlation suggested that attempts to send different messages to different audience segments were successful. Classified advertisements appear to be a highly cost-efficient method for recruiting a diverse range of participants into healthy eating programs and research about healthy eating.

Diagnostic Accuracy and Cost-Effectiveness of Alternative Methods for Detection of Soil-Transmitted Helminths in a Post-Treatment Setting in Western Kenya

PubMed Central

Kepha, Stella; Kihara, Jimmy H.; Njenga, Sammy M.; Pullan, Rachel L.; Brooker, Simon J.

2014-01-01

Objectives This study evaluates the diagnostic accuracy and cost-effectiveness of the Kato-Katz and Mini-FLOTAC methods for detection of soil-transmitted helminths (STH) in a post-treatment setting in western Kenya. A cost analysis also explores the cost implications of collecting samples during school surveys when compared to household surveys. Methods Stool samples were collected from children (n = 652) attending 18 schools in Bungoma County and diagnosed by the Kato-Katz and Mini-FLOTAC coprological methods. Sensitivity and additional diagnostic performance measures were analyzed using Bayesian latent class modeling. Financial and economic costs were calculated for all survey and diagnostic activities, and cost per child tested, cost per case detected and cost per STH infection correctly classified were estimated. A sensitivity analysis was conducted to assess the impact of various survey parameters on cost estimates. Results Both diagnostic methods exhibited comparable sensitivity for detection of any STH species over single and consecutive day sampling: 52.0% for single day Kato-Katz; 49.1% for single-day Mini-FLOTAC; 76.9% for consecutive day Kato-Katz; and 74.1% for consecutive day Mini-FLOTAC. Diagnostic performance did not differ significantly between methods for the different STH species. Use of Kato-Katz with school-based sampling was the lowest cost scenario for cost per child tested ($10.14) and cost per case correctly classified ($12.84). Cost per case detected was lowest for Kato-Katz used in community-based sampling ($128.24). Sensitivity analysis revealed the cost of case detection for any STH decreased non-linearly as prevalence rates increased and was influenced by the number of samples collected. Conclusions The Kato-Katz method was comparable in diagnostic sensitivity to the Mini-FLOTAC method, but afforded greater cost-effectiveness. Future work is required to evaluate the cost-effectiveness of STH surveillance in different settings. PMID:24810593

Scaling up integrated prevention campaigns for global health: costs and cost-effectiveness in 70 countries

PubMed Central

Marseille, Elliot; Jiwani, Aliya; Raut, Abhishek; Verguet, Stéphane; Walson, Judd; Kahn, James G

2014-01-01

Objective This study estimated the health impact, cost and cost-effectiveness of an integrated prevention campaign (IPC) focused on diarrhoea, malaria and HIV in 70 countries ranked by per capita disability-adjusted life-year (DALY) burden for the three diseases. Methods We constructed a deterministic cost-effectiveness model portraying an IPC combining counselling and testing, cotrimoxazole prophylaxis, referral to treatment and condom distribution for HIV prevention; bed nets for malaria prevention; and provision of household water filters for diarrhoea prevention. We developed a mix of empirical and modelled cost and health impact estimates applied to all 70 countries. One-way, multiway and scenario sensitivity analyses were conducted to document the strength of our findings. We used a healthcare payer's perspective, discounted costs and DALYs at 3% per year and denominated cost in 2012 US dollars. Primary and secondary outcomes The primary outcome was cost-effectiveness expressed as net cost per DALY averted. Other outcomes included cost of the IPC; net IPC costs adjusted for averted and additional medical costs and DALYs averted. Results Implementation of the IPC in the 10 most cost-effective countries at 15% population coverage would cost US$583 million over 3 years (adjusted costs of US$398 million), averting 8.0 million DALYs. Extending IPC programmes to all 70 of the identified high-burden countries at 15% coverage would cost an adjusted US$51.3 billion and avert 78.7 million DALYs. Incremental cost-effectiveness ranged from US$49 per DALY averted for the 10 countries with the most favourable cost-effectiveness to US$119, US$181, US$335, US$1692 and US$8340 per DALY averted as each successive group of 10 countries is added ordered by decreasing cost-effectiveness. Conclusions IPC appears cost-effective in many settings, and has the potential to substantially reduce the burden of disease in resource-poor countries. This study increases confidence that IPC can be an important new approach for enhancing global health. PMID:24969782

Recommendations for Conduct, Methodological Practices, and Reporting of Cost-effectiveness Analyses: Second Panel on Cost-Effectiveness in Health and Medicine.

PubMed

Sanders, Gillian D; Neumann, Peter J; Basu, Anirban; Brock, Dan W; Feeny, David; Krahn, Murray; Kuntz, Karen M; Meltzer, David O; Owens, Douglas K; Prosser, Lisa A; Salomon, Joshua A; Sculpher, Mark J; Trikalinos, Thomas A; Russell, Louise B; Siegel, Joanna E; Ganiats, Theodore G

2016-09-13

Since publication of the report by the Panel on Cost-Effectiveness in Health and Medicine in 1996, researchers have advanced the methods of cost-effectiveness analysis, and policy makers have experimented with its application. The need to deliver health care efficiently and the importance of using analytic techniques to understand the clinical and economic consequences of strategies to improve health have increased in recent years. To review the state of the field and provide recommendations to improve the quality of cost-effectiveness analyses. The intended audiences include researchers, government policy makers, public health officials, health care administrators, payers, businesses, clinicians, patients, and consumers. In 2012, the Second Panel on Cost-Effectiveness in Health and Medicine was formed and included 2 co-chairs, 13 members, and 3 additional members of a leadership group. These members were selected on the basis of their experience in the field to provide broad expertise in the design, conduct, and use of cost-effectiveness analyses. Over the next 3.5 years, the panel developed recommendations by consensus. These recommendations were then reviewed by invited external reviewers and through a public posting process. The concept of a "reference case" and a set of standard methodological practices that all cost-effectiveness analyses should follow to improve quality and comparability are recommended. All cost-effectiveness analyses should report 2 reference case analyses: one based on a health care sector perspective and another based on a societal perspective. The use of an "impact inventory," which is a structured table that contains consequences (both inside and outside the formal health care sector), intended to clarify the scope and boundaries of the 2 reference case analyses is also recommended. This special communication reviews these recommendations and others concerning the estimation of the consequences of interventions, the valuation of health outcomes, and the reporting of cost-effectiveness analyses. The Second Panel reviewed the current status of the field of cost-effectiveness analysis and developed a new set of recommendations. Major changes include the recommendation to perform analyses from 2 reference case perspectives and to provide an impact inventory to clarify included consequences.

Cost-Effectiveness of a Short Message Service Intervention to Prevent Type 2 Diabetes from Impaired Glucose Tolerance.

PubMed

Wong, Carlos K H; Jiao, Fang-Fang; Siu, Shing-Chung; Fung, Colman S C; Fong, Daniel Y T; Wong, Ka-Wai; Yu, Esther Y T; Lo, Yvonne Y C; Lam, Cindy L K

2016-01-01

Aims. To investigate the costs and cost-effectiveness of a short message service (SMS) intervention to prevent the onset of type 2 diabetes mellitus (T2DM) in subjects with impaired glucose tolerance (IGT). Methods. A Markov model was developed to simulate the cost and effectiveness outcomes of the SMS intervention and usual clinical practice from the health provider's perspective. The direct programme costs and the two-year SMS intervention costs were evaluated in subjects with IGT. All costs were expressed in 2011 US dollars. The incremental cost-effectiveness ratio was calculated as cost per T2DM onset prevented, cost per life year gained, and cost per quality adjusted life year (QALY) gained. Results. Within the two-year trial period, the net intervention cost of the SMS group was $42.03 per subject. The SMS intervention managed to reduce 5.05% onset of diabetes, resulting in saving $118.39 per subject over two years. In the lifetime model, the SMS intervention dominated the control by gaining an additional 0.071 QALY and saving $1020.35 per person. The SMS intervention remained dominant in all sensitivity analyses. Conclusions. The SMS intervention for IGT subjects had the superiority of lower monetary cost and a considerable improvement in preventing or delaying the T2DM onset. This trial is registered with ClinicalTrials.gov NCT01556880.

A Systematic Review of Cost-Effectiveness Studies Reporting Cost-per-DALY Averted

PubMed Central

Neumann, Peter J.; Thorat, Teja; Zhong, Yue; Anderson, Jordan; Farquhar, Megan; Salem, Mark; Sandberg, Eileen; Saret, Cayla J.; Wilkinson, Colby; Cohen, Joshua T.

2016-01-01

Introduction Calculating the cost per disability-adjusted life years (DALYs) averted associated with interventions is an increasing popular means of assessing the cost-effectiveness of strategies to improve population health. However, there has been no systematic attempt to characterize the literature and its evolution. Methods We conducted a systematic review of cost-effectiveness studies reporting cost-per-DALY averted from 2000 through 2015. We developed the Global Health Cost-Effectiveness Analysis (GHCEA) Registry, a repository of English-language cost-per-DALY averted studies indexed in PubMed. To identify candidate studies, we searched PubMed for articles with titles or abstracts containing the phrases “disability-adjusted” or “DALY”. Two reviewers with training in health economics independently reviewed each article selected in our abstract review, gathering information using a standardized data collection form. We summarized descriptive characteristics on study methodology: e.g., intervention type, country of study, study funder, study perspective, along with methodological and reporting practices over two time periods: 2000–2009 and 2010–2015. We analyzed the types of costs included in analyses, the study quality on a scale from 1 (low) to 7 (high), and examined the correlation between diseases researched and the burden of disease in different world regions. Results We identified 479 cost-per-DALY averted studies published from 2000 through 2015. Studies from Sub-Saharan Africa comprised the largest portion of published studies. The disease areas most commonly studied were communicable, maternal, neonatal, and nutritional disorders (67%), followed by non-communicable diseases (28%). A high proportion of studies evaluated primary prevention strategies (59%). Pharmaceutical interventions were commonly assessed (32%) followed by immunizations (28%). Adherence to good practices for conducting and reporting cost-effectiveness analysis varied considerably. Studies mainly included formal healthcare sector costs. A large number of the studies in Sub-Saharan Africa addressed high-burden conditions such as HIV/AIDS, tuberculosis, neglected tropical diseases and malaria, and diarrhea, lower respiratory infections, meningitis, and other common infectious diseases. Conclusion The Global Health Cost-Effectiveness Analysis Registry reveals a growing and diverse field of cost-per-DALY averted studies. However, study methods and reporting practices have varied substantially. PMID:28005986

Industrial ecology: Quantitative methods for exploring a lower carbon future

NASA Astrophysics Data System (ADS)

Thomas, Valerie M.

2015-03-01

Quantitative methods for environmental and cost analyses of energy, industrial, and infrastructure systems are briefly introduced and surveyed, with the aim of encouraging broader utilization and development of quantitative methods in sustainable energy research. Material and energy flow analyses can provide an overall system overview. The methods of engineering economics and cost benefit analysis, such as net present values, are the most straightforward approach for evaluating investment options, with the levelized cost of energy being a widely used metric in electricity analyses. Environmental lifecycle assessment has been extensively developed, with both detailed process-based and comprehensive input-output approaches available. Optimization methods provide an opportunity to go beyond engineering economics to develop detailed least-cost or least-impact combinations of many different choices.

The Economics of Time in Learning.

ERIC Educational Resources Information Center

Christoffersson, Nils-Olaf

The use of a mathematical model supported by empirical findings had developed a method of cost effectiveness that can be used in evaluations between educational objectives and goals. Educational time allocation can be studied and developed into a micro-level economic theory of decision. Learning has been defined as increments which can be…

Development of Mobile Tracer Correlation Approach for Quantification of Emissions from Landfills and Other Large Area Sources

EPA Science Inventory

There is a recognized need to develop cost effective measurement methods for greenhouse gas and air pollutant emissions from large area sources such as landfills, waste water treatment ponds, open area processing units, agricultural operations, CO2 sequestration fields, and site ...

Module-Based Professional Development for Teachers: A Cost-Effective Philippine Experiment

ERIC Educational Resources Information Center

San Antonio, Diosdado M.; Morales, Nelson S.; Moral, Leo S.

2011-01-01

This article examines the impact of implementing module-based professional development for teachers (MBPDT) in the Philippines. A mixed-method study, experimental design with empirical surveys and an open-ended questionnaire revealed that the experimental group of teachers had greater professional content knowledge compared with the control group…

Simple, efficient, and cost-effective multiplex genotyping with matrix assisted laser desorption/ionization time-of-flight mass spectrometry of hemoglobin beta gene mutations.

PubMed

Thongnoppakhun, Wanna; Jiemsup, Surasak; Yongkiettrakul, Suganya; Kanjanakorn, Chompunut; Limwongse, Chanin; Wilairat, Prapon; Vanasant, Anusorn; Rungroj, Nanyawan; Yenchitsomanus, Pa-Thai

2009-07-01

A number of common mutations in the hemoglobin beta (HBB) gene cause beta-thalassemia, a monogenic disease with high prevalence in certain ethnic groups. As there are 30 HBB variants that cover more than 99.5% of HBB mutant alleles in the Thai population, an efficient and cost-effective screening method is required. Three panels of multiplex primer extensions, followed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were developed. The first panel simultaneously detected 21 of the most common HBB mutations, while the second panel screened nine additional mutations, plus seven of the first panel for confirmation; the third panel was used to confirm three HBB mutations, yielding a 9-Da mass difference that could not be clearly distinguished by the previous two panels. The protocol was both standardized using 40 samples of known genotypes and subsequently validated in 162 blind samples with 27 different genotypes (including a normal control), comprising heterozygous, compound heterozygous, and homozygous beta-thalassemia. Results were in complete agreement with those from the genotyping results, conducted using three different methods overall. The method developed here permitted the detection of mutations missed using a single genotyping procedure. The procedure should serve as the method of choice for HBB genotyping due to its accuracy, sensitivity, and cost-effectiveness, and can be applied to studies of other gene variants that are potential disease biomarkers.

A review method for UML requirements analysis model employing system-side prototyping.

PubMed

Ogata, Shinpei; Matsuura, Saeko

2013-12-01

User interface prototyping is an effective method for users to validate the requirements defined by analysts at an early stage of a software development. However, a user interface prototype system offers weak support for the analysts to verify the consistency of the specifications about internal aspects of a system such as business logic. As the result, the inconsistency causes a lot of rework costs because the inconsistency often makes the developers impossible to actualize the system based on the specifications. For verifying such consistency, functional prototyping is an effective method for the analysts, but it needs a lot of costs and more detailed specifications. In this paper, we propose a review method so that analysts can verify the consistency among several different kinds of diagrams in UML efficiently by employing system-side prototyping without the detailed model. The system-side prototype system does not have any functions to achieve business logic, but visualizes the results of the integration among the diagrams in UML as Web pages. The usefulness of our proposal was evaluated by applying our proposal into a development of Library Management System (LMS) for a laboratory. This development was conducted by a group. As the result, our proposal was useful for discovering the serious inconsistency caused by the misunderstanding among the members of the group.

Systems design study of the Pioneer Venus spacecraft. Volume 2. Preliminary program development plan

NASA Technical Reports Server (NTRS)

1973-01-01

The preliminary development plan for the Pioneer Venus program is presented. This preliminary plan treats only developmental aspects that would have a significant effect on program cost. These significant development areas were: master program schedule planning; test planning - both unit and system testing for probes/orbiter/ probe bus; ground support equipment; performance assurance; and science integration Various test planning options and test method techniques were evaluated in terms of achieving a low-cost program without degrading mission performance or system reliability. The approaches studied and the methodology of the selected approach are defined.

Cost-effectiveness analysis for joint pain treatment in patients with osteoarthritis treated at the Instituto Mexicano del Seguro Social (IMSS): Comparison of nonsteroidal anti-inflammatory drugs (NSAIDs) vs. cyclooxygenase-2 selective inhibitors

PubMed Central

Contreras-Hernández, Iris; Mould-Quevedo, Joaquín F; Torres-González, Rubén; Goycochea-Robles, María Victoria; Pacheco-Domínguez, Reyna Lizette; Sánchez-García, Sergio; Mejía-Aranguré, Juan Manuel; Garduño-Espinosa, Juan

2008-01-01

Background Osteoarthritis (OA) is one of the main causes of disability worldwide, especially in persons >55 years of age. Currently, controversy remains about the best therapeutic alternative for this disease when evaluated from a cost-effectiveness viewpoint. For Social Security Institutions in developing countries, it is very important to assess what drugs may decrease the subsequent use of medical care resources, considering their adverse events that are known to have a significant increase in medical care costs of patients with OA. Three treatment alternatives were compared: celecoxib (200 mg twice daily), non-selective NSAIDs (naproxen, 500 mg twice daily; diclofenac, 100 mg twice daily; and piroxicam, 20 mg/day) and acetaminophen, 1000 mg twice daily. The aim of this study was to identify the most cost-effective first-choice pharmacological treatment for the control of joint pain secondary to OA in patients treated at the Instituto Mexicano del Seguro Social (IMSS). Methods A cost-effectiveness assessment was carried out. A systematic review of the literature was performed to obtain transition probabilities. In order to evaluate analysis robustness, one-way and probabilistic sensitivity analyses were conducted. Estimations were done for a 6-month period. Results Treatment demonstrating the best cost-effectiveness results [lowest cost-effectiveness ratio $17.5 pesos/patient ($1.75 USD)] was celecoxib. According to the one-way sensitivity analysis, celecoxib would need to markedly decrease its effectiveness in order for it to not be the optimal treatment option. In the probabilistic analysis, both in the construction of the acceptability curves and in the estimation of net economic benefits, the most cost-effective option was celecoxib. Conclusion From a Mexican institutional perspective and probably in other Social Security Institutions in similar developing countries, the most cost-effective option for treatment of knee and/or hip OA would be celecoxib. PMID:19014495

Economic Considerations for Moving beyond the Kato-Katz Technique for Diagnosing Intestinal Parasites As We Move Towards Elimination.

PubMed

Turner, Hugo C; Bettis, Alison A; Dunn, Julia C; Whitton, Jane M; Hollingsworth, T Déirdre; Fleming, Fiona M; Anderson, Roy M

2017-06-01

While the need for more sensitive diagnostics for intestinal helminths is well known, the cost of developing and implementing new tests is considered relatively high compared to the Kato-Katz technique. Here, we review the reported costs of performing the Kato-Katz technique. We also outline several economic arguments we believe highlight the need for further investment in alternative diagnostics, and considerations that should be made when comparing their costs. In our opinion, we highlight that, without new diagnostic methods, it will be difficult for policy makers to make the most cost-effective decisions and that the potentially higher unit costs of new methods can be outweighed by the long-term programmatic benefits they have (such as the ability to detect the interruption of transmission). Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Water Quality Monitoring in Developing Countries; Can Microbial Fuel Cells be the Answer?

PubMed Central

Chouler, Jon; Di Lorenzo, Mirella

2015-01-01

The provision of safe water and adequate sanitation in developing countries is a must. A range of chemical and biological methods are currently used to ensure the safety of water for consumption. These methods however suffer from high costs, complexity of use and inability to function onsite and in real time. The microbial fuel cell (MFC) technology has great potential for the rapid and simple testing of the quality of water sources. MFCs have the advantages of high simplicity and possibility for onsite and real time monitoring. Depending on the choice of manufacturing materials, this technology can also be highly cost effective. This review covers the state-of-the-art research on MFC sensors for water quality monitoring, and explores enabling factors for their use in developing countries. PMID:26193327

Water Quality Monitoring in Developing Countries; Can Microbial Fuel Cells be the Answer?

PubMed

Chouler, Jon; Di Lorenzo, Mirella

2015-07-16

The provision of safe water and adequate sanitation in developing countries is a must. A range of chemical and biological methods are currently used to ensure the safety of water for consumption. These methods however suffer from high costs, complexity of use and inability to function onsite and in real time. The microbial fuel cell (MFC) technology has great potential for the rapid and simple testing of the quality of water sources. MFCs have the advantages of high simplicity and possibility for onsite and real time monitoring. Depending on the choice of manufacturing materials, this technology can also be highly cost effective. This review covers the state-of-the-art research on MFC sensors for water quality monitoring, and explores enabling factors for their use in developing countries.

The management of cardiovascular disease in the Netherlands: analysis of different programmes.

PubMed

Cramm, Jane M; Tsiachristas, Apostolos; Walters, Bethany H; Adams, Samantha A; Bal, Roland; Huijsman, Robbert; Rutten-Van Mölken, Maureen P M H; Nieboer, Anna P

2013-01-01

Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery. But, disease management programme development and implementation is a complex undertaking that requires effective decision-making. Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in routine care. As care pathways become more complex, they also become more expensive. Better preparedness and training can prevent unnecessary delays during the implementation period and are crucial to reducing costs.

The costs of training a nurse practitioner in primary care: the importance of allowing for the cost of education and training when making decisions about changing the professional-mix.

PubMed

Curtis, Lesley; Netten, Ann

2007-05-01

What is already known on this topic * Cost containment through the most effective mix of staff achievable within available resources and organisational priorities is of increasing importance in most health systems. However, there is a dearth of information about the full economic implications of changing skill mix. * In the UK a major shift in the primary care workforce is likely in response to the rapidly developing role of nurse practitioners and policies aimed to encourage GP practices to transfer some of their responsibilities to other, less costly, professionals. * Previous research has developed an approach to incorporating the costs of qualifications, and thus the investment required to develop a skilled workforce, for a variety of health service professionals including GPs. What this study adds * This paper describes a methodology of costing nurse practitioners that incorporates the human capital cost implications of developing a skilled nurse practitioner workforce. With appropriate sources of data the method could be adapted for use internationally. * Including the full cost of qualifications results in nearly a 24 per cent increase in the unit cost of a Nurse Practitioner. * Allowing for all investment costs and adjusting for length of consultation, the cost of a GP consultation was nearly 60 per cent higher than that of a Nurse Practitioner.

Development of a cost-effectiveness analysis of leafy green marketing agreement irrigation water provisions.

PubMed

Jensen, Helen H; Pouliot, Sébastien; Wang, Tong; Jay-Russell, Michele T

2014-06-01

An analysis of the effectiveness of meeting the irrigation water provisions of the Leafy Green Marketing Agreement (LGMA) relative to its costs provides an approach to evaluating the cost-effectiveness of good agricultural practices that uses available data. A case example for lettuce is used to evaluate data requirements and provide a methodological example to determine the cost-effectiveness of the LGMA water quality provision. Both cost and field data on pathogen or indicator bacterial levels are difficult and expensive to obtain prospectively. Therefore, methods to use existing field and experimental data are required. Based on data from current literature and experimental studies, we calculate a cost-efficiency ratio that expresses the reduction in E. coli concentration per dollar expenditure on testing of irrigation water. With appropriate data, the same type of analysis can be extended to soil amendments and other practices and to evaluation of public benefits of practices used in production. Careful use of existing and experimental data can lead to evaluation of an expanded set of practices.

Cost-effectiveness of active transport for primary school children - Walking School Bus program

PubMed Central

Moodie, Marjory; Haby, Michelle; Galvin, Leah; Swinburn, Boyd; Carter, Robert

2009-01-01

Background To assess from a societal perspective the incremental cost-effectiveness of the Walking School Bus (WSB) program for Australian primary school children as an obesity prevention measure. The intervention was modelled as part of the ACE-Obesity study, which evaluated, using consistent methods, thirteen interventions targeting unhealthy weight gain in Australian children and adolescents. Methods A logic pathway was used to model the effects on body mass index [BMI] and disability-adjusted life years [DALYs] of the Victorian WSB program if applied throughout Australia. Cost offsets and DALY benefits were modelled until the eligible cohort reached 100 years of age or death. The reference year was 2001. Second stage filter criteria ('equity', 'strength of evidence', 'acceptability', feasibility', sustainability' and 'side-effects') were assessed to incorporate additional factors that impact on resource allocation decisions. Results The modelled intervention reached 7,840 children aged 5 to 7 years and cost $AUD22.8M ($16.6M; $30.9M). This resulted in an incremental saving of 30 DALYs (7:104) and a net cost per DALY saved of $AUD0.76M ($0.23M; $3.32M). The evidence base was judged as 'weak' as there are no data available documenting the increase in the number of children walking due to the intervention. The high costs of the current approach may limit sustainability. Conclusion Under current modelling assumptions, the WSB program is not an effective or cost-effective measure to reduce childhood obesity. The attribution of some costs to non-obesity objectives (reduced traffic congestion and air pollution etc.) is justified to emphasise the other possible benefits. The program's cost-effectiveness would be improved by more comprehensive implementation within current infrastructure arrangements. The importance of active transport to school suggests that improvements in WSB or its variants need to be developed and fully evaluated. PMID:19747402

Modelling the Impact and Cost-Effectiveness of Biomarker Tests as Compared with Pathogen-Specific Diagnostics in the Management of Undifferentiated Fever in Remote Tropical Settings

PubMed Central

Lubell, Yoel; Althaus, Thomas; Blacksell, Stuart D.; Paris, Daniel H.; Mayxay, Mayfong; Pan-Ngum, Wirichada; White, Lisa J.; Day, Nicholas P. J.; Newton, Paul N.

2016-01-01

Background Malaria accounts for a small fraction of febrile cases in increasingly large areas of the malaria endemic world. Point-of-care tests to improve the management of non-malarial fevers appropriate for primary care are few, consisting of either diagnostic tests for specific pathogens or testing for biomarkers of host response that indicate whether antibiotics might be required. The impact and cost-effectiveness of these approaches are relatively unexplored and methods to do so are not well-developed. Methods We model the ability of dengue and scrub typhus rapid tests to inform antibiotic treatment, as compared with testing for elevated C-Reactive Protein (CRP), a biomarker of host-inflammation. Using data on causes of fever in rural Laos, we estimate the proportion of outpatients that would be correctly classified as requiring an antibiotic and the likely cost-effectiveness of the approaches. Results Use of either pathogen-specific test slightly increased the proportion of patients correctly classified as requiring antibiotics. CRP testing was consistently superior to the pathogen-specific tests, despite heterogeneity in causes of fever. All testing strategies are likely to result in higher average costs, but only the scrub typhus and CRP tests are likely to be cost-effective when considering direct health benefits, with median cost per disability adjusted life year averted of approximately $48 USD and $94 USD, respectively. Conclusions Testing for viral infections is unlikely to be cost-effective when considering only direct health benefits to patients. Testing for prevalent bacterial pathogens can be cost-effective, having the benefit of informing not only whether treatment is required, but also as to the most appropriate antibiotic; this advantage, however, varies widely in response to heterogeneity in causes of fever. Testing for biomarkers of host inflammation is likely to be consistently cost-effective despite high heterogeneity, and can also offer substantial reductions in over-use of antimicrobials in viral infections. PMID:27027303

Application of the stepwise focusing method to optimize the cost-effectiveness of genome-wide association studies with limited research budgets for genotyping and phenotyping.

PubMed

Ohashi, J; Clark, A G

2005-05-01

The recent cataloguing of a large number of SNPs enables us to perform genome-wide association studies for detecting common genetic variants associated with disease. Such studies, however, generally have limited research budgets for genotyping and phenotyping. It is therefore necessary to optimize the study design by determining the most cost-effective numbers of SNPs and individuals to analyze. In this report we applied the stepwise focusing method, with two-stage design, developed by Satagopan et al. (2002) and Saito & Kamatani (2002), to optimize the cost-effectiveness of a genome-wide direct association study using a transmission/disequilibrium test (TDT). The stepwise focusing method consists of two steps: a large number of SNPs are examined in the first focusing step, and then all the SNPs showing a significant P-value are tested again using a larger set of individuals in the second focusing step. In the framework of optimization, the numbers of SNPs and families and the significance levels in the first and second steps were regarded as variables to be considered. Our results showed that the stepwise focusing method achieves a distinct gain of power compared to a conventional method with the same research budget.

Mutation Analysis of SLC26A4 for Pendred Syndrome and Nonsyndromic Hearing Loss by High-Resolution Melting

PubMed Central

Chen, Neng; Tranebjærg, Lisbeth; Rendtorff, Nanna Dahl; Schrijver, Iris

2011-01-01

Pendred syndrome and DFNB4 (autosomal recessive nonsyndromic congenital deafness, locus 4) are associated with autosomal recessive congenital sensorineural hearing loss and mutations in the SLC26A4 gene. Extensive allelic heterogeneity, however, necessitates analysis of all exons and splice sites to identify mutations for individual patients. Although Sanger sequencing is the gold standard for mutation detection, screening methods supplemented with targeted sequencing can provide a cost-effective alternative. One such method, denaturing high-performance liquid chromatography, was developed for clinical mutation detection in SLC26A4. However, this method inherently cannot distinguish homozygous changes from wild-type sequences. High-resolution melting (HRM), on the other hand, can detect heterozygous and homozygous changes cost-effectively, without any post-PCR modifications. We developed a closed-tube HRM mutation detection method specific for SLC26A4 that can be used in the clinical diagnostic setting. Twenty-eight primer pairs were designed to cover all 21 SLC26A4 exons and splice junction sequences. Using the resulting amplicons, initial HRM analysis detected all 45 variants previously identified by sequencing. Subsequently, a 384-well plate format was designed for up to three patient samples per run. Blinded HRM testing on these plates of patient samples collected over 1 year in a clinical diagnostic laboratory accurately detected all variants identified by sequencing. In conclusion, HRM with targeted sequencing is a reliable, simple, and cost-effective method for SLC26A4 mutation screening and detection. PMID:21704276

Cost-effectiveness and pricing of antibacterial drugs.

PubMed

Verhoef, Talitha I; Morris, Stephen

2015-01-01

Growing resistance to antibacterial agents has increased the need for the development of new drugs to treat bacterial infections. Given increasing pressure on limited health budgets, it is important to study the cost-effectiveness of these drugs, as well as their safety and efficacy, to find out whether or not they provide value for money and should be reimbursed. In this article, we systematically reviewed 38 cost-effectiveness analyses of new antibacterial agents. Most studies showed the new antibacterial drugs were cost-effective compared to older generation drugs. Drug pricing is a complicated process, involving different stakeholders, and has a large influence on cost-effectiveness. Value-based pricing is a method to determine the price of a drug at which it can be cost-effective. It is currently unclear what the influence of value-based pricing will be on the prices of new antibacterial agents, but an important factor will be the definition of 'value', which as well as the impact of the drug on patient health might also include other factors such as wider social impact and the health impact of disease. © 2015 The Authors. Chemical Biology & Drug Design Published by John Wiley & Sons Ltd.

Research requirements to reduce civil helicopter life cycle cost

NASA Technical Reports Server (NTRS)

Blewitt, S. J.

1978-01-01

The problem of the high cost of helicopter development, production, operation, and maintenance is defined and the cost drivers are identified. Helicopter life cycle costs would decrease by about 17 percent if currently available technology were applied. With advanced technology, a reduction of about 30 percent in helicopter life cycle costs is projected. Technological and managerial deficiencies which contribute to high costs are examined, basic research and development projects which can reduce costs include methods for reduced fuel consumption; improved turbine engines; airframe and engine production methods; safety; rotor systems; and advanced transmission systems.

An efficient approach to understanding and predicting the effects of multiple task characteristics on performance.

PubMed

Richardson, Miles

2017-04-01

In ergonomics there is often a need to identify and predict the separate effects of multiple factors on performance. A cost-effective fractional factorial approach to understanding the relationship between task characteristics and task performance is presented. The method has been shown to provide sufficient independent variability to reveal and predict the effects of task characteristics on performance in two domains. The five steps outlined are: selection of performance measure, task characteristic identification, task design for user trials, data collection, regression model development and task characteristic analysis. The approach can be used for furthering knowledge of task performance, theoretical understanding, experimental control and prediction of task performance. Practitioner Summary: A cost-effective method to identify and predict the separate effects of multiple factors on performance is presented. The five steps allow a better understanding of task factors during the design process.

Novel method to reduce fishy aftertaste in wine and seafood pairing using alcohol-treated yeast cells.

PubMed

Tsuji, Toshikazu; Kanai, Keiko; Yokoyama, Aki; Tamura, Takayuki; Hanamure, Kenichi; Sasaki, Kanako; Takata, Ryoji; Yoshida, Satoshi

2012-06-20

"Fishy aftertaste" is sometimes perceived in wine consumed with seafood. Iron in wine has been reported to be a key compound that produces fishy aftertaste. However, cost-effective methods to remove iron from wine have not been developed. Here, we describe a cost-effective and safe iron adsorbent consisting of alcohol-treated yeast (ATY) cells based on the observation that nonviable cells adsorbed iron after completion of fermentation. Treatment of cells with more than 40% (v/v) ethanol killed them without compromising their ability to adsorb iron. Drying the ATY cells did not reduce iron adsorption. Use of ATY cells together with phytic acid had a synergistic effect on iron removal. We term this means of removing iron the "ATY-PA" method. Sensory analysis indicated that fishy aftertaste in wine-seafood pairings was not perceived if the wine had been pretreated with both ATY cells and phytic acid.

A model of translational research for diabetes prevention in low and middle-income countries: The Diabetes Community Lifestyle Improvement Program (D-CLIP) trial.

PubMed

Weber, Mary Beth; Ranjani, Harish; Meyers, Gaya Celeste; Mohan, Viswanathan; Narayan, K M Venkat

2012-04-01

The Diabetes Community Lifestyle Improvement Program (D-CLIP) aims to implement and evaluate in a controlled, randomized trial the effectiveness, cost-effectiveness, and sustainability of a culturally appropriate, low-cost, and sustainable lifestyle intervention for the prevention of type 2 diabetes mellitus in India. D-CLIP, a translational research project adapted from the methods and curriculum developed and tested for efficacy in the Diabetes Prevention Program, utilizes innovated methods (a step-wise model of diabetes prevention with lifestyle and metformin added when needed; inclusion of individuals with isolated glucose tolerance, impaired fasting glucose, and both; classes team-taught by professionals and trained community educators) with the goals of increasing diabetes prevention, community acceptability, and long-term dissemination and sustainability of the program. The study outcomes are: diabetes incidence (primary measure of effectiveness), cost-effectiveness, changes in anthropometric measures, plasma lipids, blood pressure, blood glucose, and HbA(1c,) Program acceptability and sustainability will be assessed using a mixed methods approach. D-CLIP, a low-cost, community-based, research program, addresses the key components of translational research and can be used as a model for prevention of chronic diseases in other low and middle-income country settings. Copyright © 2011 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

ASSESSMENT OF CHEMICAL EFFECTS ON NEURITE OUTGROWTH, NEURONAL POLARIZATION AND SYNAPTOGENESIS IN RAT CORTICAL NEURONS USING HIGH CONTENT IMAGE ANALYSIS

EPA Science Inventory

There is a need for efficient, cost-effective methods for screening and prioritization of potential developmental neurotoxicants. One approach uses in vitro cell culture models that can recapitulate the critical processes of nervous system development. In vitro, primary cultures ...

Noninvasive and cost-effective trapping method for monitoring sensitive mammal populations

Treesearch

Stephanie E. Trapp; Elizabeth A. Flaherty

2017-01-01

Noninvasive sampling methods provide a means to monitor endangered, threatened, or sensitive species or populations while increasing the efficacy of personnel effort and time. We developed a monitoring protocol that utilizes single-capture hair snares and analysis of morphological features of hair for evaluating populations. During 2015, we used the West Virginia...

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2005-10-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-01-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Is Fidaxomicin Worth the Cost? An Economic Analysis

PubMed Central

Bartsch, Sarah M.; Umscheid, Craig A.; Fishman, Neil; Lee, Bruce Y.

2013-01-01

Background. In May 2011, the Food and Drug Administration approved fidaxomicin for the treatment of Clostridium difficile infection (CDI). It has been found to be noninferior to vancomycin; however, its cost-effectiveness for the treatment of CDI remains undetermined. Methods. We developed a decision analytic simulation model to determine the economic value of fidaxomicin for CDI treatment from the third-party payer perspective. We looked at CDI treatment in these 3 cases: (1) no fidaxomicin, (2) only fidaxomicin, and (3) fidaxomicin based on strain typing results. Results. The incremental cost-effectiveness ratio for fidaxomicin based on screening given current conditions was >$43.7 million per quality-adjusted life-year and using only fidaxomicin was dominated (ie, more costly and less effective) by the other 2 treatment strategies explored. The fidaxomicin strategy tended to remain dominated, even at lower costs. With approximately 50% of CDI due to the NAP1/BI/027 strain, a course of fidaxomicin would need to cost ≤$150 to be cost-effective in the treatment of all CDI cases and between $160 and $400 to be cost-effective for those with a non-NAP1/BI/027 strain (ie, treatment based on strain typing). Conclusions. Given the current cost and NAP1/BI/027 accounting for approximately 50% of isolates, using fidaxomicin as a first-line treatment for CDI is not cost-effective. However, typing and treatment with fidaxomicin based on strain may be more promising depending on the costs of fidaxomicin. PMID:23704121

Potential of electric discharge plasma methods in abatement of volatile organic compounds originating from the food industry.

PubMed

Preis, S; Klauson, D; Gregor, A

2013-01-15

Increased volatile organic compounds emissions and commensurate tightening of applicable legislation mean that the development and application of effective, cost-efficient abatement methods are areas of growing concern. This paper reviews the last two decades' publications on organic vapour emissions from food processing, their sources, impacts and treatment methods. An overview of the latest developments in conventional air treatment methods is presented, followed by the main focus of the paper, non-thermal plasma technology. The results of the review suggest that non-thermal plasma technology, in its pulsed corona discharge configuration, is an emerging treatment method with potential for low-cost, effective abatement of a wide spectrum of organic air pollutants. It is found that the combination of plasma treatment with catalysis is a development trend that demonstrates considerable potential. The as yet relatively small number of plasma treatment applications is considered to be due to the novelty of pulsed electric discharge techniques and a lack of reliable pulse generators and reactors. Other issues acting as barriers to widespread adoption of the technique include the possible formation of stable oxidation by-products, residual ozone and nitrogen oxides, and sensitivity towards air humidity. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of an Objective Space Suit Mobility Performance Metric Using Metabolic Cost and Functional Tasks

NASA Technical Reports Server (NTRS)

McFarland, Shane M.; Norcross, Jason

2016-01-01

Existing methods for evaluating EVA suit performance and mobility have historically concentrated on isolated joint range of motion and torque. However, these techniques do little to evaluate how well a suited crewmember can actually perform during an EVA. An alternative method of characterizing suited mobility through measurement of metabolic cost to the wearer has been evaluated at Johnson Space Center over the past several years. The most recent study involved six test subjects completing multiple trials of various functional tasks in each of three different space suits; the results indicated it was often possible to discern between different suit designs on the basis of metabolic cost alone. However, other variables may have an effect on real-world suited performance; namely, completion time of the task, the gravity field in which the task is completed, etc. While previous results have analyzed completion time, metabolic cost, and metabolic cost normalized to system mass individually, it is desirable to develop a single metric comprising these (and potentially other) performance metrics. This paper outlines the background upon which this single-score metric is determined to be feasible, and initial efforts to develop such a metric. Forward work includes variable coefficient determination and verification of the metric through repeated testing.

Cost-Effectiveness of Pertuzumab in Human Epidermal Growth Factor Receptor 2–Positive Metastatic Breast Cancer

PubMed Central

Qian, Yushen; Pollom, Erqi L.; King, Martin T.; Dudley, Sara A.; Shaffer, Jenny L.; Chang, Daniel T.; Gibbs, Iris C.; Goldhaber-Fiebert, Jeremy D.; Horst, Kathleen C.

2016-01-01

Purpose The Clinical Evaluation of Pertuzumab and Trastuzumab (CLEOPATRA) study showed a 15.7-month survival benefit with the addition of pertuzumab to docetaxel and trastuzumab (THP) as first-line treatment for patients with human epidermal growth factor receptor 2 (HER2) –overexpressing metastatic breast cancer. We performed a cost-effectiveness analysis to assess the value of adding pertuzumab. Patient and Methods We developed a decision-analytic Markov model to evaluate the cost effectiveness of docetaxel plus trastuzumab (TH) with or without pertuzumab in US patients with metastatic breast cancer. The model followed patients weekly over their remaining lifetimes. Health states included stable disease, progressing disease, hospice, and death. Transition probabilities were based on the CLEOPATRA study. Costs reflected the 2014 Medicare rates. Health state utilities were the same as those used in other recent cost-effectiveness studies of trastuzumab and pertuzumab. Outcomes included health benefits expressed as discounted quality-adjusted life-years (QALYs), costs in US dollars, and cost effectiveness expressed as an incremental cost-effectiveness ratio. One- and multiway deterministic and probabilistic sensitivity analyses explored the effects of specific assumptions. Results Modeled median survival was 39.4 months for TH and 56.9 months for THP. The addition of pertuzumab resulted in an additional 1.81 life-years gained, or 0.62 QALYs, at a cost of $472,668 per QALY gained. Deterministic sensitivity analysis showed that THP is unlikely to be cost effective even under the most favorable assumptions, and probabilistic sensitivity analysis predicted 0% chance of cost effectiveness at a willingness to pay of $100,000 per QALY gained. Conclusion THP in patients with metastatic HER2-positive breast cancer is unlikely to be cost effective in the United States. PMID:26351332

Cost-effectiveness of benign Wirsung duct strictures treatment in chronic pancreatitis.

PubMed

Łaski, Dariusz; Hać, Stanisław; Marek, Iwona; Kobiela, Jarosław; Kostro, Justyna; Adrych, Krystian; Śledziński, Zbigniew

2018-03-01

Chronic pancreatitis (CP) is an important problem for modern medicine, the healthcare system (Poland - NFZ) and the national insurance system (Poland - ZUS). The chronic nature of the disease, the lack of targeted treatment and the low mortality rate lead to an accumulation of patients who demand expensive treatment, both conservative and invasive. Rising costs in health care are forcing the need for a more cost-effective method of treatment. The primary aim of this study was to perform a retrospective calculation of costs in both surgical and endoscopic treatment, hospital stay, healthcare, and public insurance of patients suffering from chronic pancreatitis. Parallel quality of life analysis was performed. It was possible to develop a cost-effective therapeutic algorithm for patients with an uncomplicated stricture of Wirsung's duct within the Polish health care system. In Poland, the hospital costs of endoscopic treatment of patients with chronic pancreatitis were higher than those of the surgical treatment group despite both resulting in a similar life quality. From a cost-effectiveness perspective, it was shown that surgical intervention is a more cost-effective therapy than endotherapy. Furthermore, patients with benign stricture of the main pancreatic duct in chronic pancreatitis should not be treated with endotherapy for longer than 12 months.

Cost-effectiveness of benign Wirsung duct strictures treatment in chronic pancreatitis

PubMed Central

Hać, Stanisław; Marek, Iwona; Kobiela, Jarosław; Kostro, Justyna; Adrych, Krystian; Śledziński, Zbigniew

2018-01-01

Introduction Chronic pancreatitis (CP) is an important problem for modern medicine, the healthcare system (Poland – NFZ) and the national insurance system (Poland – ZUS). The chronic nature of the disease, the lack of targeted treatment and the low mortality rate lead to an accumulation of patients who demand expensive treatment, both conservative and invasive. Rising costs in health care are forcing the need for a more cost-effective method of treatment. Aim The primary aim of this study was to perform a retrospective calculation of costs in both surgical and endoscopic treatment, hospital stay, healthcare, and public insurance of patients suffering from chronic pancreatitis. Parallel quality of life analysis was performed. It was possible to develop a cost-effective therapeutic algorithm for patients with an uncomplicated stricture of Wirsung’s duct within the Polish health care system. Results In Poland, the hospital costs of endoscopic treatment of patients with chronic pancreatitis were higher than those of the surgical treatment group despite both resulting in a similar life quality. Conclusions From a cost-effectiveness perspective, it was shown that surgical intervention is a more cost-effective therapy than endotherapy. Furthermore, patients with benign stricture of the main pancreatic duct in chronic pancreatitis should not be treated with endotherapy for longer than 12 months. PMID:29643954

Aircraft operability methods applied to space launch vehicles

NASA Astrophysics Data System (ADS)

Young, Douglas

1997-01-01

The commercial space launch market requirement for low vehicle operations costs necessitates the application of methods and technologies developed and proven for complex aircraft systems. The ``building in'' of reliability and maintainability, which is applied extensively in the aircraft industry, has yet to be applied to the maximum extent possible on launch vehicles. Use of vehicle system and structural health monitoring, automated ground systems and diagnostic design methods derived from aircraft applications support the goal of achieving low cost launch vehicle operations. Transforming these operability techniques to space applications where diagnostic effectiveness has significantly different metrics is critical to the success of future launch systems. These concepts will be discussed with reference to broad launch vehicle applicability. Lessons learned and techniques used in the adaptation of these methods will be outlined drawing from recent aircraft programs and implementation on phase 1 of the X-33/RLV technology development program.

Developing particle emission inventories using remote sensing (PEIRS).

PubMed

Tang, Chia-Hsi; Coull, Brent A; Schwartz, Joel; Lyapustin, Alexei I; Di, Qian; Koutrakis, Petros

2017-01-01

Information regarding the magnitude and distribution of PM 2.5 emissions is crucial in establishing effective PM regulations and assessing the associated risk to human health and the ecosystem. At present, emission data is obtained from measured or estimated emission factors of various source types. Collecting such information for every known source is costly and time-consuming. For this reason, emission inventories are reported periodically and unknown or smaller sources are often omitted or aggregated at large spatial scale. To address these limitations, we have developed and evaluated a novel method that uses remote sensing data to construct spatially resolved emission inventories for PM 2.5 . This approach enables us to account for all sources within a fixed area, which renders source classification unnecessary. We applied this method to predict emissions in the northeastern United States during the period 2002-2013 using high-resolution 1 km × 1 km aerosol optical depth (AOD). Emission estimates moderately agreed with the EPA National Emission Inventory (R 2 = 0.66-0.71, CV = 17.7-20%). Predicted emissions are found to correlate with land use parameters, suggesting that our method can capture emissions from land-use-related sources. In addition, we distinguished small-scale intra-urban variation in emissions reflecting distribution of metropolitan sources. In essence, this study demonstrates the great potential of remote sensing data to predict particle source emissions cost-effectively. We present a novel method, particle emission inventories using remote sensing (PEIRS), using remote sensing data to construct spatially resolved PM 2.5 emission inventories. Both primary emissions and secondary formations are captured and predicted at a high spatial resolution of 1 km × 1 km. Using PEIRS, large and comprehensive data sets can be generated cost-effectively and can inform development of air quality regulations.

Cost effectiveness of recruitment methods in an obesity prevention trial for young children.

PubMed

Robinson, Jodie L; Fuerch, Janene H; Winiewicz, Dana D; Salvy, Sarah J; Roemmich, James N; Epstein, Leonard H

2007-06-01

Recruitment of participants for clinical trials requires considerable effort and cost. There is no research on the cost effectiveness of recruitment methods for an obesity prevention trial of young children. This study determined the cost effectiveness of recruiting 70 families with a child aged 4 to 7 (5.9+/-1.3) years in Western New York from February 2003 to November 2004, for a 2-year randomized obesity prevention trial to reduce television watching in the home. Of the 70 randomized families, 65.7% (n=46) were obtained through direct mailings, 24.3% (n=17) were acquired through newspaper advertisements, 7.1% (n=5) from other sources (e.g., word of mouth), and 2.9% (n=2) through posters and brochures. Costs of each recruitment method were computed by adding the cost of materials, staff time, and media expenses. Cost effectiveness (money spent per randomized participant) was US $0 for other sources, US $227.76 for direct mailing, US $546.95 for newspaper ads, and US $3,020.84 for posters and brochures. Of the methods with associated costs, direct mailing was the most cost effective in recruiting families with young children, which supports the growing literature of the effectiveness of direct mailing.

Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Liu, Bing

This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs andmore » savings over time.« less

Health Impact Assessment as a framework for evaluation of local complex projects.

PubMed

Heath, Lucy

2007-07-01

Health impact assessment (HIA) has been used to predict effects of a local parenting strategy and develop an evaluation framework. Methods used included literature searches, inequalities profiling, interviews with key informants and a review of available cost data. Four priority areas, where parenting can potentially impact, were identified: education, antisocial behaviour, lifestyle choices and mental health. The results concerning mental health are presented here. Improving the quality of parenting can impact on a child's mental health. The costs relating to the mental health outcomes are high and parenting is a cost-effective method to address the family dynamics that impact on this. Intermediary indicators, including clear boundaries, time spent as a family and parental involvement can be used to evaluate the intervention in the short-term, although there are difficulties in their measurement. The HIA process can improve cross-sectorial working, increased community participation and keep inequalities on the agenda.

Cost-Sharing of Ecological Construction Based on Trapezoidal Intuitionistic Fuzzy Cooperative Games.

PubMed

Liu, Jiacai; Zhao, Wenjian

2016-11-08

There exist some fuzziness and uncertainty in the process of ecological construction. The aim of this paper is to develop a direct and an effective simplified method for obtaining the cost-sharing scheme when some interested parties form a cooperative coalition to improve the ecological environment of Min River together. Firstly, we propose the solution concept of the least square prenucleolus of cooperative games with coalition values expressed by trapezoidal intuitionistic fuzzy numbers. Then, based on the square of the distance in the numerical value between two trapezoidal intuitionistic fuzzy numbers, we establish a corresponding quadratic programming model to obtain the least square prenucleolus, which can effectively avoid the information distortion and uncertainty enlargement brought about by the subtraction of trapezoidal intuitionistic fuzzy numbers. Finally, we give a numerical example about the cost-sharing of ecological construction in Fujian Province in China to show the validity, applicability, and advantages of the proposed model and method.

Novel high speed fiber-optic pressure sensor systems.

DOT National Transportation Integrated Search

2014-03-01

The goal of this project is to develop a complete test of this technology for high-speed, high-accuracy applications, specifically cost-effective data acquisition techniques and practical mounting methods tailored for the subject environment. The sec...

Cost and Economic Benefit of Clinical Decision Support Systems (CDSS) for Cardiovascular Disease Prevention: A Community Guide Systematic Review

PubMed Central

Jacob, Verughese; Thota, Anilkrishna B.; Chattopadhyay, Sajal K.; Njie, Gibril J.; Proia, Krista K.; Hopkins, David P.; Ross, Murray N.; Pronk, Nicolaas P.; Clymer, John M.

2017-01-01

Objective This review evaluates costs and benefits associated with acquiring, implementing, and operating clinical decision support systems (CDSS) to prevent cardiovascular disease (CVD). Materials and Methods Methods developed for The Community Guide were used to review CDSS literature covering the period from January 1976 to October 2015. Twenty-one studies were identified for inclusion. Results It was difficult to draw a meaningful estimate for the cost of acquiring and operating CDSS to prevent CVD from the available studies (n=12) due to considerable heterogeneity. Several studies (n=11) indicated healthcare costs were averted by using CDSS but many were partial assessments that did not consider all components of healthcare. Four cost-benefit studies reached conflicting conclusions about the net benefit of CDSS based on incomplete assessments of costs and benefits. Three cost-utility studies indicated inconsistent conclusions regarding cost-effectiveness based on a conservative $50,000 threshold. Discussion Intervention costs were not negligible but specific estimates were not derived because of the heterogeneity of implementation and reporting metrics. Expected economic benefits from averted healthcare cost could not be determined with confidence because many studies did not fully account for all components of healthcare. Conclusion We were unable to conclude whether CDSS for CVD prevention is either cost-beneficial or cost effective. Several evidence gaps are identified, most prominently the lack of information about major drivers of cost and benefit; the lack of standard metrics for the cost of CDSS; and not allowing for useful life of CDSS that generally extends beyond one accounting period. PMID:28049635

Paediatric health economic evaluations: a world view.

PubMed

Ungar, Wendy J

2007-01-01

As economic evaluation methods evolve, their applicability to special populations, such as children, has received increased scrutiny. The objective was to review paediatric health economic evaluations published over the last quarter century, comment on trends, discuss gaps between developed and developing nations, and point to future directions for research. Data compiled for the Paediatric Economic Database Evaluation (PEDE) project to 2003 were used to describe temporal and geographic trends and evaluate the frequency of intervention categories and conditions studied. The volume of paediatric health economic evaluations rose rapidly since 1980. Studies of infective/parasitic diseases, congenital anomalies and complications of pregnancy accounted for the majority. Prevention rather than treatment was emphasized. Most evaluations performed since 1998 (78%) were cost-effectiveness analyses. Cost-utility analyses were rare. The US produced half of all publications, with the U.K. contributing 12%. Economic evaluations from developing countries were uncommon, despite an urgent need for evidence-based decision-making in these regions. The interventions studied reflected local health priorities; HIV and malaria prevention were more commonly studied in developing nations, whereas treatments for asthma and birth malformations were more often evaluated in developed nations. Despite global initiatives to combat disease, developing nations rely on foreign research to inform implementation of local health programs. There is a need for better methods for data transfer and extrapolation. Future research must focus on paediatric models of costs and consequences and the development of tools to measure long-term effects.

Diagnostic accuracy and cost-effectiveness of alternative methods for detection of soil-transmitted helminths in a post-treatment setting in western Kenya.

PubMed

Assefa, Liya M; Crellen, Thomas; Kepha, Stella; Kihara, Jimmy H; Njenga, Sammy M; Pullan, Rachel L; Brooker, Simon J

2014-05-01

This study evaluates the diagnostic accuracy and cost-effectiveness of the Kato-Katz and Mini-FLOTAC methods for detection of soil-transmitted helminths (STH) in a post-treatment setting in western Kenya. A cost analysis also explores the cost implications of collecting samples during school surveys when compared to household surveys. Stool samples were collected from children (n = 652) attending 18 schools in Bungoma County and diagnosed by the Kato-Katz and Mini-FLOTAC coprological methods. Sensitivity and additional diagnostic performance measures were analyzed using Bayesian latent class modeling. Financial and economic costs were calculated for all survey and diagnostic activities, and cost per child tested, cost per case detected and cost per STH infection correctly classified were estimated. A sensitivity analysis was conducted to assess the impact of various survey parameters on cost estimates. Both diagnostic methods exhibited comparable sensitivity for detection of any STH species over single and consecutive day sampling: 52.0% for single day Kato-Katz; 49.1% for single-day Mini-FLOTAC; 76.9% for consecutive day Kato-Katz; and 74.1% for consecutive day Mini-FLOTAC. Diagnostic performance did not differ significantly between methods for the different STH species. Use of Kato-Katz with school-based sampling was the lowest cost scenario for cost per child tested ($10.14) and cost per case correctly classified ($12.84). Cost per case detected was lowest for Kato-Katz used in community-based sampling ($128.24). Sensitivity analysis revealed the cost of case detection for any STH decreased non-linearly as prevalence rates increased and was influenced by the number of samples collected. The Kato-Katz method was comparable in diagnostic sensitivity to the Mini-FLOTAC method, but afforded greater cost-effectiveness. Future work is required to evaluate the cost-effectiveness of STH surveillance in different settings.

Predicting Costs of Eastern National Forest Wildernesses.

ERIC Educational Resources Information Center

Guldin, Richard W.

1981-01-01

A method for estimating the total direct social costs for proposed wilderness areas is presented. A cost framework is constructed and equations are developed for cost components. To illustrate the study's method, social costs are estimated for a proposed wilderness area in New England. (Author/JN)

Disruptive Technology: Saving Money and Inspiring Engagement in Professional Staff.

PubMed

McPherson, Penne; Talbot, Elizabeth

Competent, efficient, and cost-effective delivery of professional development is a challenge in health care. Collaboration of teaching methodologies with academia and acute care offers fresh perspectives and delivery methods that can facilitate optimal outcomes. One multihospital system introduced the academic "flipped classroom" model to its acute care setting and integrated it into professional development requirements. The concept of the flipped classroom requires independent student engagement prior to classroom activities versus the traditional classroom lecture model. Results realized a cost savings in 2 years of $28,737 in addition to positive employee engagement.

Cost-effectiveness of peer role play and standardized patients in undergraduate communication training.

PubMed

Bosse, Hans Martin; Nickel, Martin; Huwendiek, Sören; Schultz, Jobst Hendrik; Nikendei, Christoph

2015-10-24

The few studies directly comparing the methodological approach of peer role play (RP) and standardized patients (SP) for the delivery of communication skills all suggest that both methods are effective. In this study we calculated the costs of both methods (given comparable outcomes) and are the first to generate a differential cost-effectiveness analysis of both methods. Medical students in their prefinal year were randomly assigned to one of two groups receiving communication training in Pediatrics either with RP (N = 34) or 19 individually trained SP (N = 35). In an OSCE with standardized patients using the Calgary-Cambridge Referenced Observation Guide both groups achieved comparable high scores (results published). In this study, corresponding costs were assessed as man-hours resulting from hours of work of SP and tutors. A cost-effectiveness analysis was performed. Cost-effectiveness analysis revealed a major advantage for RP as compared to SP (112 vs. 172 man hours; cost effectiveness ratio .74 vs. .45) at comparable performance levels after training with both methods. While both peer role play and training with standardized patients have their value in medical curricula, RP has a major advantage in terms of cost-effectiveness. This could be taken into account in future decisions.

The cost effectiveness of vancomycin for preventing infections after shoulder arthroplasty: a break-even analysis.

PubMed

Hatch, M Daniel; Daniels, Stephen D; Glerum, Kimberly M; Higgins, Laurence D

2017-03-01

Increasing methicillin resistance and recognition of Propionibacterium acnes as a cause of infection in shoulder arthroplasty has led to the adoption of local vancomycin powder application as a more effective method to prevent expensive periprosthetic infections. However, no study has analyzed the cost effectiveness of vancomycin powder for preventing infection after shoulder replacement. Cost data for infection-related care of 16 patients treated for deep periprosthetic shoulder infection was collected from our institution for the break-even analysis. An equation was developed and applied to the data to determine how effective vancomycin powder would need to be at reducing a baseline infection rate to make prophylactic use cost effective. The efficacy of vancomycin (absolute risk reduction [ARR]) was evaluated at different unit costs, baseline infection rates, and average costs of treating infection. We determined vancomycin to be cost effective if the initial infection rate decreased by 0.04% (ARR). Using the current costs of vancomycin reported in the literature (range: $2.50/1000 mg to $44/1000 mg), we determined vancomycin to be cost effective with an ARR range of 0.01% at a cost of $2.50/1000 mg to 0.19% at $44/1000 mg. Baseline infection rate does not influence the ARR obtained at any specific cost of vancomycin or the cost of treating infection. We have derived and used a break-even equation to assess efficacy of prophylactic antibiotics during shoulder surgery. We further demonstrated the prophylactic administration of local vancomycin powder during shoulder arthroplasty to be a highly cost-effective practice. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Recruitment strategy cost and impact on minority accrual to a breast cancer prevention trial.

PubMed

Dew, Alexander; Khan, Seema; Babinski, Christie; Michel, Nancy; Heffernan, Marie; Stephan, Stefanie; Jordan, Neil; Jovanovic, Borko; Carney, Paula; Bergan, Raymond

2013-04-01

Recruitment of minorities to cancer prevention trials is difficult and costly. Early-phase cancer prevention trials have fewer resources to promote recruitment. Identifying cost-effective strategies that can replace or supplement traditional recruitment methods and improve minority accrual to small, early-phase cancer prevention trials are of critical importance. To compare the costs of accrual strategies used in a small breast cancer prevention trial and assess their impact on recruitment and minority accrual. A total of 1196 potential subjects with a known recruitment source contacted study coordinators about the SOY study, a breast cancer prevention trial. Recruitment strategies for this study included recruitment from within the Northwestern University network (internal strategy), advertisements placed on public transportation (Chicago Transit Authority (CTA)), health-related events, media (print/radio/television), and direct mail. Total recruitment strategy cost included the cost of study personnel and material costs calculated from itemized receipts. Incremental cost-effectiveness ratios (ICERs) were calculated to compare the relative cost-effectiveness of each recruitment strategy. If a strategy was more costly and less effective than its comparator, then that strategy was considered dominated. Scenarios that were not dominated were compared. The primary effectiveness measure was the number of consents. Separate ICERs were calculated using the number of minority consents as the effectiveness measure. The total cost of SOY study recruitment was US$164,585, which included the cost of materials (US$26,133) and personnel (US$138,452). The internal referral strategy was the largest source of trial contacts (748/1196; 63%), consents (107/150; 71%), and minority consents (17/34; 50%) and was the most expensive strategy (US$139,033). CTA ads generated the second largest number of trial contacts (326/1196; 27%), the most minority contacts (184/321; 57%), and 16 minority consents (16/34; 47%), at a total cost of US$15,562. The other three strategies yielded many fewer contacts and consents. The methods of health events, CTA ads, and the internal strategy showed some evidence of cost-effectiveness (ICER: US$581, US$717, and US$1524, respectively). The CTA strategy was the most cost-effective strategy for minority accrual (ICER: US$908). Recall bias may have limited the accuracy of estimated time spent on recruitment by study personnel. Also, costs spent specifically on minority accrual were unobtainable; results may not be generalizable to other settings; and cost-effectiveness data for the methods of media, health events, and direct mail should be interpreted with caution since these methods generated few consents. Public transportation ads have the potential to generate numerous minority contacts and consents at a reasonable cost within an urban setting. Combined with traditional methods of recruitment, this method can lead to timelier study completion and increased minority accrual. Future research should prospectively track recruitment and costs in order to better assess the cost-effectiveness of recruitment methods used to target minority populations.

Advances in fish vaccine delivery.

PubMed

Plant, Karen P; Lapatra, Scott E

2011-12-01

Disease prevention is essential to the continued development of aquaculture around the world. Vaccination is the most effective method of combating disease and currently there are a number of vaccines commercially available for use in fish. The majority of aquatic vaccines are delivered by injection, which is by far the most effective method when compared to oral or immersion deliveries. However it is labor intensive, costly and not feasible for large numbers of fish under 20 g. Attempts to develop novel oral and immersion delivery methods have resulted in varying degrees of success but may have great potential for the future. Copyright © 2011 Elsevier Ltd. All rights reserved.

Diazo processing of LANDSAT imagery: A low-cost instructional technique

NASA Technical Reports Server (NTRS)

Lusch, D. P.

1981-01-01

Diazo processing of LANDSAT imagery is a relatively simple and cost effective method of producing enhanced renditions of the visual LANDSAT products. This technique is capable of producing a variety of image enhancements which have value in a teaching laboratory environment. Additionally, with the appropriate equipment, applications research which relys on accurate and repeatable results is possible. Exposure and development equipment options, diazo materials, and enhancement routines are discussed.

Simple and cost-effective liquid chromatography-mass spectrometry method to measure dabrafenib quantitatively and six metabolites semi-quantitatively in human plasma.

PubMed

Vikingsson, Svante; Dahlberg, Jan-Olof; Hansson, Johan; Höiom, Veronica; Gréen, Henrik

2017-06-01

Dabrafenib is an inhibitor of BRAF V600E used for treating metastatic melanoma but a majority of patients experience adverse effects. Methods to measure the levels of dabrafenib and major metabolites during treatment are needed to allow development of individualized dosing strategies to reduce the burden of such adverse events. In this study, an LC-MS/MS method capable of measuring dabrafenib quantitatively and six metabolites semi-quantitatively is presented. The method is fully validated with regard to dabrafenib in human plasma in the range 5-5000 ng/mL. The analytes were separated on a C18 column after protein precipitation and detected in positive electrospray ionization mode using a Xevo TQ triple quadrupole mass spectrometer. As no commercial reference standards are available, the calibration curve of dabrafenib was used for semi-quantification of dabrafenib metabolites. Compared to earlier methods the presented method represents a simpler and more cost-effective approach suitable for clinical studies. Graphical abstract Combined multi reaction monitoring transitions of dabrafenib and metabolites in a typical case sample.

Cost-effectiveness of the stream-gaging program in Missouri

USGS Publications Warehouse

Waite, L.A.

1987-01-01

This report documents the results of an evaluation of the cost effectiveness of the 1986 stream-gaging program in Missouri. Alternative methods of developing streamflow information and cost-effective resource allocation were used to evaluate the Missouri program. Alternative methods were considered statewide, but the cost effective resource allocation study was restricted to the area covered by the Rolla field headquarters. The average standard error of estimate for records of instantaneous discharge was 17 percent; assuming the 1986 budget and operating schedule, it was shown that this overall degree of accuracy could be improved to 16 percent by altering the 1986 schedule of station visitations. A minimum budget of $203,870, with a corresponding average standard error of estimate 17 percent, is required to operate the 1986 program for the Rolla field headquarters; a budget of less than this would not permit proper service and maintenance of the stations or adequate definition of stage-discharge relations. The maximum budget analyzed was $418,870, which resulted in an average standard error of estimate of 14 percent. Improved instrumentation can have a positive effect on streamflow uncertainties by decreasing lost records. An earlier study of data uses found that data uses were sufficient to justify continued operation of all stations. One of the stations investigated, Current River at Doniphan (07068000) was suitable for the application of alternative methods for simulating discharge records. However, the station was continued because of data use requirements. (Author 's abstract)

A Systematic Review of Economic Evaluations of Treatments for Borderline Personality Disorder

PubMed Central

Brettschneider, Christian; Riedel-Heller, Steffi; König, Hans-Helmut

2014-01-01

Purpose The borderline personality disorder is a common mental disorder. It is frequently associated with various mental co-morbidities and a fundamental loss of functioning. The borderline personality disorder causes high costs to society. The aim of this study was to perform a systematic literature review of existing economic evaluations of treatments for borderline personality disorder. Materials and Methods We performed a systematic literature search in MEDLINE, EMBASE, PsycINFO and NHSEED for partial and full economic evaluations regarding borderline personality disorder. Reported cost data were inflated to the year 2012 and converted into US-$ using purchasing power parities to allow for comparability. Quality assessment of the studies was performed by means of the Consensus on Health Economic Criteria checklist, a checklist developed by a Delphi method in cooperation with 23 international experts. Results We identified 6 partial and 9 full economic evaluations. The methodical quality was moderate (fulfilled quality criteria: 79.2% [SD: 15.4%] in partial economic evaluations, 77.3% [SD: 8.5%] in full economic evaluations). Most evaluations analysed psychotherapeutic interventions. Although ambiguous, most evidence exists on dialectical-behavioural therapy. Cognitive behavioural therapy and schema-focused therapy are cost-saving. Evidence on other interventions is scarce. Conclusion The economic evidence is not sufficient to draw robust conclusions for all treatments. It is possible that some treatments are cost-effective. Most evidence exists on dialectical-behavioural therapy. Yet, it is ambiguous. Further research concerning the cost-effectiveness of treatments is necessary as well as the identification of relevant cost categories and the validation of effect measures. PMID:25265185

IT investments can add business value.

PubMed

Williams, Terry G

2002-05-01

Investment in information technology (IT) is costly, but necessary to enable healthcare organizations to improve their infrastructure and achieve other improvement initiatives. Such an investment is even more costly, however, if the technology does not appropriately enable organizations to perform business processes that help them accomplish their mission of providing safe, high-quality care cost-effectively. Before committing to a costly IT investment, healthcare organizations should implement a decision-making process that can help them choose, implement, and use technology that will provide sustained business value. A seven-step decision-making process that can help healthcare organizations achieve this result involves performing a gap analysis, assessing and aligning organizational goals, establishing distributed accountability, identifying linked organizational-change initiatives, determining measurement methods, establishing appropriate teams to ensure systems are integrated with multidisciplinary improvement methods, and developing a plan to accelerate adoption of the IT product.

Reach and Cost-Effectiveness of the PrePex Device for Safe Male Circumcision in Uganda

PubMed Central

Duffy, Kevin; Galukande, Moses; Wooding, Nick; Dea, Monica; Coutinho, Alex

2013-01-01

Introduction Modelling, supported by the USAID Health Policy Initiative and UNAIDS, performed in 2011, indicated that Uganda would need to perform 4.2 million medical male circumcisions (MMCs) to reach 80% prevalence. Since 2010 Uganda has completed 380,000 circumcisions, and has set a national target of 1 million for 2013. Objective To evaluate the relative reach and cost-effectiveness of PrePex compared to the current surgical SMC method and to determine the effect that this might have in helping to achieve the Uganda national SMC targets. Methods A cross-sectional descriptive cost-analysis study conducted at International Hospital Kampala over ten weeks from August to October 2012. Data collected during the performance of 625 circumcisions using PrePex was compared to data previously collected from 10,000 circumcisions using a surgical circumcision method at the same site. Ethical approval was obtained. Results The moderate adverse events (AE) ratio when using the PrePex device was 2% and no severe adverse events were encountered, which is comparable to the surgical method, thus the AE rate has no effect on the reach or cost-effectiveness of PrePex. The unit cost to perform one circumcision using PrePex is $30.55, 35% ($7.90) higher than the current surgical method, but the PrePex method improves operator efficiency by 60%, meaning that a team can perform 24 completed circumcisions compared to 15 by the surgical method. The cost-effectiveness of PrePex, comparing the cost of performing circumcisions to the future cost savings of potentially averted HIV infections, is just 2% less than the current surgical method, at a device cost price of $20. Conclusion PrePex is a viable SMC tool for scale-up with unrivalled potential for superior reach, however national targets can only be met with effective demand creation and availability of trained human resource. PMID:23717402

Modular laboratories--cost-effective and sustainable infrastructure for resource-limited settings.

PubMed

Bridges, Daniel J; Colborn, James; Chan, Adeline S T; Winters, Anna M; Dengala, Dereje; Fornadel, Christen M; Kosloff, Barry

2014-12-01

High-quality laboratory space to support basic science, clinical research projects, or health services is often severely lacking in the developing world. Moreover, the construction of suitable facilities using traditional methods is time-consuming, expensive, and challenging to implement. Three real world examples showing how shipping containers can be converted into modern laboratories are highlighted. These include use as an insectary, a molecular laboratory, and a BSL-3 containment laboratory. These modular conversions have a number of advantages over brick and mortar construction and provide a cost-effective and timely solution to offer high-quality, user-friendly laboratory space applicable within the developing world. © The American Society of Tropical Medicine and Hygiene.

A quiet flow Ludwieg tube for study of transition in compressible boundary layers: Design and feasibility

NASA Technical Reports Server (NTRS)

Schneider, Steven P.

1990-01-01

Since Ludwieg tubes have been around for many years, and NASA has already established the feasibility of creating quiet-flow wind tunnels, the major question addressed was the cost of the proposed facility. Cost estimates were obtained for major system components, and new designs which allowed fabrication at lower cost were developed. A large fraction of the facility cost comes from the fabrication of the highly polished quiet-flow supersonic nozzle. Methods for the design of this nozzle were studied at length in an attempt to find an effective but less expensive design. Progress was sufficient to show that a quality facility can be fabricated at a reasonable cost.

A Universal Noninvasive Continuous Blood Pressure Measurement System for Remote Healthcare Monitoring.

PubMed

Mukherjee, Ramtanu; Ghosh, Sanchita; Gupta, Bharat; Chakravarty, Tapas

2018-01-22

The effectiveness of any remote healthcare monitoring system depends on how much accurate, patient-friendly, versatile, and cost-effective measurement it is delivering. There has always been a huge demand for such a long-term noninvasive remote blood pressure (BP) measurement system, which could be used worldwide in the remote healthcare industry. Thus, noninvasive continuous BP measurement and remote monitoring have become an emerging area in the remote healthcare industry. Photoplethysmography-based (PPG) BP measurement is a continuous, unobtrusive, patient-friendly, and cost-effective solution. However, BP measurements through PPG sensors are not much reliable and accurate due to some major limitations like pressure disturbance, motion artifacts, and variations in human skin tone. A novel reflective PPG sensor has been developed to eliminate the abovementioned pressure disturbance and motion artifacts during the BP measurement. Considering the variations of the human skin tone across demography, a novel algorithm has been developed to make the BP measurement accurate and reliable. The training dataset captured 186 subjects' data and the trial dataset captured another new 102 subjects' data. The overall accuracy achieved by using the proposed method is nearly 98%. Thus, demonstrating the efficacy of the proposed method. The developed BP monitoring system is quite accurate, reliable, cost-effective, handy, and user friendly. It is also expected that this system would be quite useful to monitor the BP of infants, elderly people, patients having wounds, burn injury, or in the intensive care unit environment.

TEAM-HF Cost-Effectiveness Model: A Web-Based Program Designed to Evaluate the Cost-Effectiveness of Disease Management Programs in Heart Failure

PubMed Central

Reed, Shelby D.; Neilson, Matthew P.; Gardner, Matthew; Li, Yanhong; Briggs, Andrew H.; Polsky, Daniel E.; Graham, Felicia L.; Bowers, Margaret T.; Paul, Sara C.; Granger, Bradi B.; Schulman, Kevin A.; Whellan, David J.; Riegel, Barbara; Levy, Wayne C.

2015-01-01

Background Heart failure disease management programs can influence medical resource use and quality-adjusted survival. Because projecting long-term costs and survival is challenging, a consistent and valid approach to extrapolating short-term outcomes would be valuable. Methods We developed the Tools for Economic Analysis of Patient Management Interventions in Heart Failure (TEAM-HF) Cost-Effectiveness Model, a Web-based simulation tool designed to integrate data on demographic, clinical, and laboratory characteristics, use of evidence-based medications, and costs to generate predicted outcomes. Survival projections are based on a modified Seattle Heart Failure Model (SHFM). Projections of resource use and quality of life are modeled using relationships with time-varying SHFM scores. The model can be used to evaluate parallel-group and single-cohort designs and hypothetical programs. Simulations consist of 10,000 pairs of virtual cohorts used to generate estimates of resource use, costs, survival, and incremental cost-effectiveness ratios from user inputs. Results The model demonstrated acceptable internal and external validity in replicating resource use, costs, and survival estimates from 3 clinical trials. Simulations to evaluate the cost-effectiveness of heart failure disease management programs across 3 scenarios demonstrate how the model can be used to design a program in which short-term improvements in functioning and use of evidence-based treatments are sufficient to demonstrate good long-term value to the health care system. Conclusion The TEAM-HF Cost-Effectiveness Model provides researchers and providers with a tool for conducting long-term cost-effectiveness analyses of disease management programs in heart failure. PMID:26542504

Costing evidence for health care decision-making in Austria: A systematic review

PubMed Central

Mayer, Susanne; Kiss, Noemi; Łaszewska, Agata

2017-01-01

Background With rising healthcare costs comes an increasing demand for evidence-informed resource allocation using economic evaluations worldwide. Furthermore, standardization of costing and reporting methods both at international and national levels are imperative to make economic evaluations a valid tool for decision-making. The aim of this review is to assess the availability and consistency of costing evidence that could be used for decision-making in Austria. It describes systematically the current economic evaluation and costing studies landscape focusing on the applied costing methods and their reporting standards. Findings are discussed in terms of their likely impacts on evidence-based decision-making and potential suggestions for areas of development. Methods A systematic literature review of English and German language peer-reviewed as well as grey literature (2004–2015) was conducted to identify Austrian economic analyses. The databases MEDLINE, EMBASE, SSCI, EconLit, NHS EED and Scopus were searched. Publication and study characteristics, costing methods, reporting standards and valuation sources were systematically synthesised and assessed. Results A total of 93 studies were included. 87% were journal articles, 13% were reports. 41% of all studies were full economic evaluations, mostly cost-effectiveness analyses. Based on relevant standards the most commonly observed limitations were that 60% of the studies did not clearly state an analytical perspective, 25% of the studies did not provide the year of costing, 27% did not comprehensively list all valuation sources, and 38% did not report all applied unit costs. Conclusion There are substantial inconsistencies in the costing methods and reporting standards in economic analyses in Austria, which may contribute to a low acceptance and lack of interest in economic evaluation-informed decision making. To improve comparability and quality of future studies, national costing guidelines should be updated with more specific methodological guidance and a national reference cost library should be set up to allow harmonisation of valuation methods. PMID:28806728

Parametric evaluation of the cost effectiveness of Shuttle payload vibroacoustic test plans

NASA Technical Reports Server (NTRS)

Stahle, C. V.; Gongloff, H. R.; Keegan, W. B.; Young, J. P.

1978-01-01

Consideration is given to alternate vibroacoustic test plans for sortie and free flyer Shuttle payloads. Statistical decision models for nine test plans provide a viable method of evaluating the cost effectiveness of alternate vibroacoustic test plans and the associated test levels. The methodology is a major step toward the development of a useful tool for the quantitative tailoring of vibroacoustic test programs to sortie and free flyer payloads. A broader application of the methodology is now possible by the use of the OCTAVE computer code.

Evaluating the cost effectiveness of environmental projects: Case studies in aerospace and defense

NASA Technical Reports Server (NTRS)

Shunk, James F.

1995-01-01

Using the replacement technology of high pressure waterjet decoating systems as an example, a simple methodology is presented for developing a cost effectiveness model. The model uses a four-step process to formulate an economic justification designed for presentation to decision makers as an assessment of the value of the replacement technology over conventional methods. Three case studies from major U.S. and international airlines are used to illustrate the methodology and resulting model. Tax and depreciation impacts are also presented as potential additions to the model.

Evaluating the Translation Process of an Internet-Based Self-Help Intervention for Prevention of Depression: A Cost-Effectiveness Analysis

PubMed Central

2013-01-01

Background Depression is common and treatable with cognitive behavior therapy (CBT), for example. However, access to this therapy is limited. Internet-based interventions have been found to be effective in reducing symptoms of depression. The International Society for Research on Internet Interventions has highlighted the importance of translating effective Internet programs into multiple languages to enable worldwide dissemination. Objective The aim of the current study was to determine if it would be cost effective to translate an existing English-language Internet-based intervention for use in a non-English-speaking country. Methods This paper reports an evaluation of a trial in which a research group in Norway translated two English-language Internet-based interventions into Norwegian (MoodGYM and BluePages) that had previously been shown to reduce symptoms of depression. The translation process and estimates of the cost-effectiveness of such a translation process is described. Estimated health effect was found by using quality-adjusted life years (QALY). Results Conservative estimates indicate that for every 1000 persons treated, 16 QALYs are gained. The investment is returned 9 times and the cost-effectiveness ratio (CER) is 3432. The costs of the translation project totaled to approximately 27% of the estimated original English-language version development costs. Conclusions The economic analysis shows that the cost-effectiveness of the translation project was substantial. Hopefully, these results will encourage others to do similar analyses and report cost-effectiveness data in their research reports. PMID:23343481

Comparative Cost-Effectiveness of Interventions to Improve Medication Adherence after Myocardial Infarction

PubMed Central

Ito, Kouta; Shrank, William H; Avorn, Jerry; Patrick, Amanda R; Brennan, Troyen A; Antman, Elliot M; Choudhry, Niteesh K

2012-01-01

Objective To evaluate the comparative cost-effectiveness of interventions to improve adherence to evidence-based medications among postmyocardial infarction (MI) patients. Data Sources/Study Setting Cost-effectiveness analysis. Study Design We developed a Markov model simulating a hypothetical cohort of 65-year-old post-MI patients who were prescribed secondary prevention medications. We evaluated mailed education, disease management, polypill use, and combinations of these interventions. The analysis was performed from a societal perspective over a lifetime horizon. The main outcome was an incremental cost-effectiveness ratio (ICER) as measured by cost per quality-adjusted life year (QALY) gained. Data Collection/Extraction Methods Model inputs were extracted from published literature. Principal Findings Compared with usual care, only mailed education had both improved health outcomes and reduced spending. Mailed education plus disease management, disease management, polypill use, polypill use plus mailed education, and polypill use plus disease management cost were $74,600, $69,200, $133,000, $113,000, and $142,900 per QALY gained, respectively. In an incremental analysis, only mailed education had an ICER of less than $100,000 per QALY and was therefore the optimal strategy. Polypill use, particularly when combined with mailed education, could be cost effective, and potentially cost saving if its price decreased to less than $100 per month. Conclusions Mailed education and a polypill, once available, may be the cost-saving strategies for improving post-MI medication adherence. PMID:22998129

A Text-Computer Assisted Instruction Program as a Viable Alternative for Continuing Education in Laboratory Medicine.

ERIC Educational Resources Information Center

Bruce, A. Wayne

1986-01-01

Describes reasons for developing combined text and computer assisted instruction (CAI) teaching programs for delivery of continuing education to laboratory professionals, and mechanisms used for developing a CAI program on method evaluation in the clinical laboratory. Results of an evaluation of the software's cost effectiveness and instructional…

Screening for Chemical Effects on Neuronal Proliferation and Neurite Outgrowth Using High-Content/High-Throughput Microscopy

EPA Science Inventory

The need to develop novel screening methods for developmental neurotoxicity in order to alleviate the demands of cost, time, and animals required for in vivo toxicity studies is well recognized. Accordingly, the U.S. EPA launched the ToxCast research program in 2007 to develop c...

Cost-effectiveness and resource implications of aggressive action on TB in China, India and South Africa: a combined analysis of nine models

PubMed Central

Menzies, Nicolas A; Gomez, Gabriela B; Bozzani, Fiammetta; Chatterjee, Susmita; Foster, Nicola; Baena, Ines Garcia; Laurence, Yoko V; Qiang, Sun; Siroka, Andrew; Sweeney, Sedona; Verguet, Stéphane; Arinaminpathy, Nimalan; Azman, Andrew S; Bendavid, Eran; Chang, Stewart T; Cohen, Ted; Denholm, Justin T; Dowdy, David W; Eckhoff, Philip A; Goldhaber-Fiebert, Jeremy D; Handel, Andreas; Huynh, Grace H; Lalli, Marek; Lin, Hsien-Ho; Mandal, Sandip; McBryde, Emma S; Pandey, Surabhi; Salomon, Joshua A; Suen, Sze-chuan; Sumner, Tom; Trauer, James M; Wagner, Bradley G; Whalen, Christopher C; Wu, Chieh-Yin; Boccia, Delia; Chadha, Vineet K; Charalambous, Salome; Chin, Daniel P; Churchyard, Gavin; Daniels, Colleen; Dewan, Puneet; Ditiu, Lucica; Eaton, Jeffrey W; Grant, Alison D; Hippner, Piotr; Hosseini, Mehran; Mametja, David; Pretorius, Carel; Pillay, Yogan; Rade, Kiran; Sahu, Suvanand; Wang, Lixia; Houben, Rein MGJ; Kimerling, Michael E; White, Richard G; Vassall, Anna

2017-01-01

BACKGROUND The End TB Strategy sets global goals of reducing TB incidence and mortality by 50% and 75% respectively by 2025. We assessed resource requirements and cost-effectiveness of strategies to achieve these targets in China, India, and South Africa. METHODS We examined intervention scenarios developed in consultation with country stakeholders, which scaled-up existing interventions to high but feasible coverage by 2025. Nine independent TB modelling groups collaborated to estimate policy outcomes, and we costed each scenario by synthesizing service utilization estimates, empirical cost data, and expert opinion on implementation strategies. We estimated health impact and resource implications for 2016–2035, including patient-incurred costs. To assess resource requirements and cost-effectiveness, we compared scenarios to a base case representing continued current practice. FINDINGS Incremental TB service costs differed by scenario and country, and in some cases more than doubled current funding needs. In general, expanding TB services substantially reduced patient-incurred costs; and in India and China this produced net cost-savings for most interventions under a societal perspective. In all countries, expanding TB care access produced substantial health gains. Compared to current practice, most intervention approaches appeared highly cost-effective when compared to conventional cost-effectiveness thresholds. INTERPRETATION Expanding TB services appears cost-effective for high-burden countries and could generate substantial health and economic benefits for patients, though funding needs challenge affordability. Further work is required to determine the optimal intervention mix for each country. PMID:27720689

Measuring the quality-of-life effects of diagnostic and screening tests.

PubMed

Swan, J Shannon; Miksad, Rebecca A

2009-08-01

Health-related quality of life (HRQL) is a central concept for understanding the outcomes of medical care. When used in cost-effectiveness analysis, HRQL is typically measured for conditions persisting over long time frames (years), and quality-adjusted life year (QALY) values are generated. Consequently, years are the basic unit of time for cost-effectiveness analysis results: dollars spent per QALY gained. However, shorter term components of health care may also affect HRQL, and there is increased interest in measuring and accounting for these events. In radiology, the short-term HRQL effects of screening and diagnostic testing may affect a test's cost-effectiveness, even though they may only last for days. The unique challenge in radiology HRQL assessment is to realistically tap into the testing and screening experience while remaining consistent with QALY theory. The authors review HRQL assessment and highlight methods developed to specifically address the short-term effects of radiologic screening and testing.

Adding a Time-Series Design Element to the Success Case Method to Improve Methodological Rigor: An Application for Nonprofit Program Evaluation

ERIC Educational Resources Information Center

Coryn, Chris L. S.; Schroter, Daniela C.; Hanssen, Carl E.

2009-01-01

Brinkerhoff's Success Case Method (SCM) was developed with the specific purpose of assessing the impact of organizational interventions (e.g., training and coaching) on business goals by analyzing extreme groups using case study techniques and storytelling. As an efficient and cost-effective method of evaluative inquiry, SCM is attractive in other…

Cost-Effectiveness of Statins for Primary Cardiovascular Prevention in Chronic Kidney Disease

PubMed Central

Erickson, Kevin F.; Japa, Sohan; Owens, Douglas K.; Chertow, Glenn M.; Garber, Alan M.; Goldhaber-Fiebert, Jeremy D.

2013-01-01

Objectives To evaluate the cost-effectiveness of statins for primary prevention of myocardial infarction (MI) and stroke in patients with chronic kidney disease (CKD). Background Patients with CKD have an elevated risk of MI and stroke. Although HMG Co-A reductase inhibitors (“statins”) may prevent cardiovascular events in patients with non-dialysis-requiring CKD, adverse drug effects and competing risks could materially influence net effects and clinical decision-making. Methods We developed a decision-analytic model of CKD and cardiovascular disease (CVD) to determine the cost-effectiveness of low-cost generic statins for primary CVD prevention in men and women with hypertension and mild-to-moderate CKD. Outcomes included MI and stroke rates, discounted quality adjusted life years (QALYs) and lifetime costs (2010 USD), and incremental cost-effectiveness ratios. Results For 65 year-old men with moderate hypertension and mild-to-moderate CKD, statins reduced the combined rate of MI and stroke, yielded 0.10 QALYs, and increased costs by $1,800 ($18,000 per QALY gained). For patients with lower baseline cardiovascular risks, health and economic benefits were smaller; for 65 year-old women, statins yielded 0.06 QALYs and increased costs by $1,900 ($33,400 per QALY gained). Results were sensitive to rates of rhabdomyolysis and drug costs. Statins are less cost-effective when obtained at average retail prices, particularly in patients at lower CVD risk. Conclusions While statins reduce absolute CVD risk in patients with CKD, increased risk of rhabdomyolysis, and competing risks associated with progressive CKD, partly offset these gains. Low-cost generic statins appear cost-effective for primary prevention of CVD in patients with mild-to-moderate CKD and hypertension. PMID:23500327

HUMAN EXPOSURE ASSESSMENT USING IMMUNOASSAY

EPA Science Inventory

The National Exposure Research Laboratory-Las Vegas is developing analytical methods for human exposure assessment studies. Critical exposure studies generate a large number of samples which must be analyzed in a reliable, cost-effective and timely manner. TCP (3,5,6-trichlor...

Analysis of polychlorinated biphenyls in transformer oil by using liquid-liquid partitioning in a microfluidic device.

PubMed

Aota, Arata; Date, Yasumoto; Terakado, Shingo; Sugiyama, Hideo; Ohmura, Naoya

2011-10-15

Polychlorinated biphenyls (PCBs) that are present in transformer oil are a common global problem because of their toxicity and environmental persistence. The development of a rapid, low-cost method for measurement of PCBs in oil has been a matter of priority because of the large number of PCB-contaminated transformers still in service. Although one of the rapid, low-cost methods involves an immunoassay, which uses multilayer column separation, hexane evaporation, dimethyl sulfoxide (DMSO) partitioning, antigen-antibody reaction, and a measurement system, there is a demand for more cost-effective and simpler procedures. In this paper, we report a DMSO partitioning method that utilizes a microfluidic device with microrecesses along the microchannel. In this method, PCBs are extracted and enriched into the DMSO confined in the microrecesses under the oil flow condition. The enrichment factor was estimated to be 2.69, which agreed well with the anticipated value. The half-maximal inhibitory concentration of PCBs in oil was found to be 0.38 mg/kg, which satisfies the much stricter criterion of 0.5 mg/kg in Japan. The developed method can realize the pretreatment of oil without the use of centrifugation for phase separation. Furthermore, the amount of expensive reagents required can be reduced considerably. Therefore, our method can serve as a powerful tool for achieving a simpler, low-cost procedure and an on-site analysis system. © 2011 American Chemical Society

Economic evaluations and randomized trials in spinal disorders: principles and methods.

PubMed

Korthals-de Bos, Ingeborg; van Tulder, Maurits; van Dieten, Hiske; Bouter, Lex

2004-02-15

Descriptive methodologic recommendations. To help researchers designing, conducting, and reporting economic evaluations in the field of back and neck pain. Economic evaluations of both existing and new therapeutic interventions are becoming increasingly important. There is a need to improve the methods of economic evaluations in the field of spinal disorders. To improve the methods of economic evaluations in the field of spinal disorders, this article describes the various steps in an economic evaluation, using as example a study on the cost-effectiveness of manual therapy, physiotherapy, and usual care provided by the general practitioner for patients with neck pain. An economic evaluation is a study in which two or more interventions are systematically compared with regard to both costs and effects. There are four types of economic evaluations, based on analysis of: (1) cost-effectiveness, (2) cost-utility, (3) cost-minimization, and (4) cost-benefit. The cost-utility analysis is a special case of cost-effectiveness analysis. The first step in all these economic evaluations is to identify the perspective of the study. The choice of the perspective will have consequences for the identification of costs and effects. Secondly, the alternatives that will be compared should be identified. Thirdly, the relevant costs and effects should be identified. Economic evaluations are usually performed from a societal perspective and include consequently direct health care costs, direct nonhealth care costs, and indirect costs. Fourthly, effect data are collected by means of questionnaires or interviews, and relevant cost data with regard to effect measures and health care utilization, work absenteeism, travel expenses, use of over-the-counter medication, and help from family and friends, are collected by means of cost diaries, questionnaires, or (telephone) interviews. Fifthly, real costs are calculated, or the costs are estimated on the basis of real costs, guideline prices, or tariffs. Finally, in the statistical analysis the mean direct, indirect, and total costs of the alternatives are compared, using bootstrapping techniques. Incremental cost-effectiveness ratios are graphically presented on a cost-effectiveness plane and acceptability curves are calculated. Economic evaluations require specific methods. These recommendations may be helpful in improving the quality of economic evaluations of new and existing therapeutic interventions in the field of spinal disorders.

The Effect of Infrastructure Sharing in Estimating Operations Cost of Future Space Transportation Systems

NASA Technical Reports Server (NTRS)

Sundaram, Meenakshi

2005-01-01

NASA and the aerospace industry are extremely serious about reducing the cost and improving the performance of launch vehicles both manned or unmanned. In the aerospace industry, sharing infrastructure for manufacturing more than one type spacecraft is becoming a trend to achieve economy of scale. An example is the Boeing Decatur facility where both Delta II and Delta IV launch vehicles are made. The author is not sure how Boeing estimates the costs of each spacecraft made in the same facility. Regardless of how a contractor estimates the cost, NASA in its popular cost estimating tool, NASA Air force Cost Modeling (NAFCOM) has to have a method built in to account for the effect of infrastructure sharing. Since there is no provision in the most recent version of NAFCOM2002 to take care of this, it has been found by the Engineering Cost Community at MSFC that the tool overestimates the manufacturing cost by as much as 30%. Therefore, the objective of this study is to develop a methodology to assess the impact of infrastructure sharing so that better operations cost estimates may be made.

Assessing Cost-Effectiveness in Obesity (ACE-Obesity): an overview of the ACE approach, economic methods and cost results

PubMed Central

2009-01-01

Background The aim of the ACE-Obesity study was to determine the economic credentials of interventions which aim to prevent unhealthy weight gain in children and adolescents. We have reported elsewhere on the modelled effectiveness of 13 obesity prevention interventions in children. In this paper, we report on the cost results and associated methods together with the innovative approach to priority setting that underpins the ACE-Obesity study. Methods The Assessing Cost Effectiveness (ACE) approach combines technical rigour with 'due process' to facilitate evidence-based policy analysis. Technical rigour was achieved through use of standardised evaluation methods, a research team that assembles best available evidence and extensive uncertainty analysis. Cost estimates were based on pathway analysis, with resource usage estimated for the interventions and their 'current practice' comparator, as well as associated cost offsets. Due process was achieved through involvement of stakeholders, consensus decisions informed by briefing papers and 2nd stage filter analysis that captures broader factors that influence policy judgements in addition to cost-effectiveness results. The 2nd stage filters agreed by stakeholders were 'equity', 'strength of the evidence', 'feasibility of implementation', 'acceptability to stakeholders', 'sustainability' and 'potential for side-effects'. Results The intervention costs varied considerably, both in absolute terms (from cost saving [6 interventions] to in excess of AUD50m per annum) and when expressed as a 'cost per child' estimate (from

Net costs of health worker rural incentive packages: an example from the Lao People's Democratic Republic.

PubMed

Keuffel, Eric; Jaskiewicz, Wanda; Paphassarang, Chanthakhath; Tulenko, Kate

2013-11-01

Many developing countries are examining whether to institute incentive packages that increase the share of health workers who opt to locate in rural settings; however, uncertainty exists with respect to the expected net cost (or benefit) from these packages. We utilize the findings from the discrete choice experiment surveys applied to students training to be health professionals and costing analyses in Lao People's Democratic Republic to model the anticipated effect of incentive packages on new worker location decisions and direct costs. Incorporating evidence on health worker density and health outcomes, we then estimate the expected 5-year net cost (or benefit) of each incentive packages for 3 health worker cadres--physicians, nurses/midwives, and medical assistants. Under base case assumptions, the optimal incentive package for each cadre produced a 5-year net benefit (maximum net benefit for physicians: US$ 44,000; nurses/midwives: US$ 5.6 million; medical assistants: US$ 485,000). After accounting for health effects, the expected net cost of select incentive packages would be substantially less than the original estimate of direct costs. In the case of Lao People's Democratic Republic, incentive packages that do not invest in capital-intensive components generally should produce larger net benefits. Combining discrete choice experiment surveys, costing surveys and cost-benefit analysis methods may be replicated by other developing countries to calculate whether health worker incentive packages are viable policy options.

Improving Cardiac Action Potential Measurements: 2D and 3D Cell Culture.

PubMed

Daily, Neil J; Yin, Yue; Kemanli, Pinar; Ip, Brian; Wakatsuki, Tetsuro

2015-11-01

Progress in the development of assays for measuring cardiac action potential is crucial for the discovery of drugs for treating cardiac disease and assessing cardiotoxicity. Recently, high-throughput methods for assessing action potential using induced pluripotent stem cell (iPSC) derived cardiomyocytes in both two-dimensional monolayer cultures and three-dimensional tissues have been developed. We describe an improved method for assessing cardiac action potential using an ultra-fast cost-effective plate reader with commercially available dyes. Our methods improve dramatically the detection of the fluorescence signal from these dyes and make way for the development of more high-throughput methods for cardiac drug discovery and cardiotoxicity.

Cost Effectiveness of Interventions to Promote Screening for Colorectal Cancer: A Randomized Trial

PubMed Central

Misra, Swati; Chan, Wenyaw; Chang, Yu-Chia; Bartholomew, L. Kay; Greisinger, Anthony; McQueen, Amy; Vernon, Sally W.

2011-01-01

Objectives Screening for colorectal cancer is considered cost effective, but is underutilized in the U.S. Information on the efficiency of "tailored interventions" to promote colorectal cancer screening in primary care settings is limited. The paper reports the results of a cost effectiveness analysis that compared a survey-only control group to a Centers for Disease Control (CDC) web-based intervention (screen for life) and to a tailored interactive computer-based intervention. Methods A randomized controlled trial of people 50 and over, was conducted to test the interventions. The sample was 1224 partcipants 50-70 years of age, recruited from Kelsey-Seybold Clinic, a large multi-specialty clinic in Houston, Texas. Screening status was obtained by medical chart review after a 12-month follow-up period. An "intention to treat" analysis and micro costing from the patient and provider perspectives were used to estimate the costs and effects. Analysis of statistical uncertainty was conducted using nonparametric bootstrapping. Results The estimated cost of implementing the web-based intervention was $40 per person and the cost of the tailored intervention was $45 per person. The additional cost per person screened for the web-based intervention compared to no intervention was $2602 and the tailored intervention was no more effective than the web-based strategy. Conclusions The tailored intervention was less cost-effective than the web-based intervention for colorectal cancer screening promotion. The web-based intervention was less cost-effective than previous studies of in-reach colorectal cancer screening promotion. Researchers need to continue developing and evaluating the effectiveness and cost-effectiveness of interventions to increase colorectal cancer screening. PMID:21617335

Cost estimating methods for advanced space systems

NASA Technical Reports Server (NTRS)

Cyr, Kelley

1994-01-01

NASA is responsible for developing much of the nation's future space technology. Cost estimates for new programs are required early in the planning process so that decisions can be made accurately. Because of the long lead times required to develop space hardware, the cost estimates are frequently required 10 to 15 years before the program delivers hardware. The system design in conceptual phases of a program is usually only vaguely defined and the technology used is so often state-of-the-art or beyond. These factors combine to make cost estimating for conceptual programs very challenging. This paper describes an effort to develop parametric cost estimating methods for space systems in the conceptual design phase. The approach is to identify variables that drive cost such as weight, quantity, development culture, design inheritance and time. The nature of the relationships between the driver variables and cost will be discussed. In particular, the relationship between weight and cost will be examined in detail. A theoretical model of cost will be developed and tested statistically against a historical database of major research and development projects.

Overview of methods in economic analyses of behavioral interventions to promote oral health

PubMed Central

O’Connell, Joan M.; Griffin, Susan

2016-01-01

Background Broad adoption of interventions that prove effective in randomized clinical trials or comparative effectiveness research may depend to a great extent on their costs and cost-effectiveness (CE). Many studies of behavioral health interventions for oral health promotion and disease prevention lack robust economic assessments of costs and CE. Objective To describe methodologies employed to assess intervention costs, potential savings, net costs, CE, and the financial sustainability of behavioral health interventions to promote oral health. Methods We provide an overview of terminology and strategies for conducting economic evaluations of behavioral interventions to improve oral health based on the recommendations of the Panel of Cost-Effectiveness in Health and Medicine. To illustrate these approaches, we summarize methodologies and findings from a limited number of published studies. The strategies include methods for assessing intervention costs, potential savings, net costs, CE, and financial sustainability from various perspectives (e.g., health-care provider, health system, health payer, employer, society). Statistical methods for estimating short-term and long-term economic outcomes and for examining the sensitivity of economic outcomes to cost parameters are described. Discussion Through the use of established protocols for evaluating costs and savings, it is possible to assess and compare intervention costs, net costs, CE, and financial sustainability. The addition of economic outcomes to outcomes reflecting effectiveness, appropriateness, acceptability, and organizational sustainability strengthens evaluations of oral health interventions and increases the potential that those found to be successful in research settings will be disseminated more broadly. PMID:21656966

Use of intravenous immunoglobulin in the Department of Neurology at Ninewells Hospital, 2008–2009: Indications for utilization and cost-effectiveness

PubMed Central

O’ Riordan, Jonathan; Swingler, Robert J.; Malek, Naveed M.

2010-01-01

This study was designed to identify the indications for prescription of intravenous immunoglobulin (IVIg) in neurology and the cost effectiveness of this therapy. Objectives: IVIg is a relatively costly therapy and the annual budget spent on providing this therapy for various indications at Ninewells Hospital was close to £1.5 million. In today’s economic times, a cost–benefit analysis of all therapies is prudent. This is of relevance to countries in the developing world as well where perhaps not everybody could afford such cost-intensive therapy. Materials and Methods: We audited 2 time periods over 12 months each in 2004–2005 and 2008–2009 to look at the patterns of utilization of IVIg over these periods. We searched the literature for alternative and cost-effective therapies for the most common indications for use of IVIg. Results: Fiscal costs on prescription of IVIg have rocketed up by almost 300% in this Neurology Department comparing data from 2004–2005 vs 2008–2009 and this is disproportionate to the increase in the annual admission rate (bed usage), partly because of the soaring costs of the drug available in the market and also because of the increased prescription of IVIg for numerous indications where clinical trials data are yet not so robust. Conclusion: We have looked at the cost of alternative therapies and offer some proposals that if implemented could potentially save £330,000 annually from the health budget at this NHS Trust. Perhaps similar models could evolve for better cost-effective utilization of IVIg in countries in the developing world where health budgeting is more acutely relevant. PMID:21264135

Premium cost optimization of operational and maintenance of green building in Indonesia using life cycle assessment method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Budiman, Rachmat; Riswanto

2017-06-01

Building has a big impact on the environmental developments. There are three general motives in building, namely the economy, society, and environment. Total completed building construction in Indonesia increased by 116% during 2009 to 2011. It made the energy consumption increased by 11% within the last three years. In fact, 70% of energy consumption is used for electricity needs on commercial buildings which leads to an increase of greenhouse gas emissions by 25%. Green Building cycle costs is known as highly building upfront cost in Indonesia. The purpose of optimization in this research improves building performance with some of green concept alternatives. Research methodology is mixed method of qualitative and quantitative approaches through questionnaire surveys and case study. Assessing the successful of optimization functions in the existing green building is based on the operational and maintenance phase with the Life Cycle Assessment Method. Choosing optimization results were based on the largest efficiency of building life cycle and the most effective cost to refund.

Analysis and evaluation of process and equipment in tasks 2 and 4 of the Low Cost Solar Array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1978-01-01

Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that substantial cost reductions can be realized from technical advancements which fall into four categories: an increase in furnace productivity; the reduction of crucible cost through use of the crucible for the equivalent of multiple state-of-the-art crystals; the combined effect of several smaller technical improvements; and a carry over effect of the expected availability of semiconductor grade polysilicon at greatly reduced prices. A format for techno-economic analysis of solar cell production processes was developed, called the University of Pennsylvania Process Characterization (UPPC) format. The accumulated Cz process data are presented.

Cost-effectiveness of additional catheter-directed thrombolysis for deep vein thrombosis

PubMed Central

ENDEN, T.; RESCH, S.; WHITE, C.; WIK, H. S.; KLØW, N. E.; SANDSET, P. M.

2013-01-01

Summary Background Additional treatment with catheter-directed thrombolysis (CDT) has recently been shown to reduce post-thrombotic syndrome (PTS). Objectives To estimate the cost effectiveness of additional CDT compared with standard treatment alone. Methods Using a Markov decision model, we compared the two treatment strategies in patients with a high proximal deep vein thrombosis (DVT) and a low risk of bleeding. The model captured the development of PTS, recurrent venous thromboembolism and treatment-related adverse events within a lifetime horizon and the perspective of a third-party payer. Uncertainty was assessed with one-way and probabilistic sensitivity analyzes. Model inputs from the CaVenT study included PTS development, major bleeding from CDT and utilities for post DVT states including PTS. The remaining clinical inputs were obtained from the literature. Costs obtained from the CaVenT study, hospital accounts and the literature are expressed in US dollars ($); effects in quality adjusted life years (QALY). Results In base case analyzes, additional CDT accumulated 32.31 QALYs compared with 31.68 QALYs after standard treatment alone. Direct medical costs were $64 709 for additional CDT and $51 866 for standard treatment. The incremental cost-effectiveness ratio (ICER) was $20 429/QALY gained. One-way sensitivity analysis showed model sensitivity to the clinical efficacy of both strategies, but the ICER remained < $55 000/QALY over the full range of all parameters. The probability that CDT is cost effective was 82% at a willingness to pay threshold of $50 000/QALY gained. Conclusions Additional CDT is likely to be a cost-effective alternative to the standard treatment for patients with a high proximal DVT and a low risk of bleeding. PMID:23452204

Cost-effectiveness analysis of different devices used for the closure of small-to-medium-sized patent ductus arteriosus in pediatric patients

PubMed Central

El-Saiedi, Sonia A; El Sisi, Amal M; Mandour, Rodina Sobhy; Abdel-Aziz, Doaa M; Attia, Wael A

2017-01-01

Aims: In this study, we examined the differences in cost and effectiveness of various devices used for the closure of small to medium sized patent ductus arteriosus (PDA). Setting and Design: We retrospectively studied 116 patients who underwent closure of small PDAs between January 2010 and January 2015. Subjects and Methods: Three types of devices were used: the Amplatzer duct occluder (ADO) II, the cook detachable coil and the Nit Occlud coil (NOC). Immediate and late complications were recorded and patients were followed up for 3 months after the procedure. Statistical Methods: All statistical calculations were performed using Statistical Package for the Social Science software. P <0.05 were considered significant. Results: We successfully deployed ADO II devices in 33 out of 35 cases, cook detachable coils in 36 out of 40 cases and NOCs in 38 out of 41 cases. In the remaining nine cases, the first device was unsuitable or embolized and required retrieval and replacement with another device. Eleven patients (9.5%) developed vascular complications and required anticoagulation therapy. Patients who had hemolysis or vascular complications remained longer in the intensive care unit, with consequently higher total cost (P = 0.016). Also, the need for a second device increased the cost per patient. Conclusions: The cook detachable coil is the most cost-effective device for closure of small-to medium-sized PDAs. Calculations of the incremental cost-effectiveness. (ICE) revealed that the Cook detachable coil had less ICE than the ADO II and NOC. The NOC was more effective with fewer complications. PMID:28566822

Spacelab Mission Implementation Cost Assessment (SMICA)

NASA Technical Reports Server (NTRS)

Guynes, B. V.

1984-01-01

A total savings of approximately 20 percent is attainable if: (1) mission management and ground processing schedules are compressed; (2) the equipping, staffing, and operating of the Payload Operations Control Center is revised, and (3) methods of working with experiment developers are changed. The development of a new mission implementation technique, which includes mission definition, experiment development, and mission integration/operations, is examined. The Payload Operations Control Center is to relocate and utilize new computer equipment to produce cost savings. Methods of reducing costs by minimizing the Spacelab and payload processing time during pre- and post-mission operation at KSC are analyzed. The changes required to reduce costs in the analytical integration process are studied. The influence of time, requirements accountability, and risk on costs is discussed. Recommendation for cost reductions developed by the Spacelab Mission Implementation Cost Assessment study are listed.

An instructional guide for leaf color analysis using digital imaging software

Treesearch

Paula F. Murakami; Michelle R. Turner; Abby K. van den Berg; Paul G. Schaberg

2005-01-01

Digital color analysis has become an increasingly popular and cost-effective method utilized by resource managers and scientists for evaluating foliar nutrition and health in response to environmental stresses. We developed and tested a new method of digital image analysis that uses Scion Image or NIH image public domain software to quantify leaf color. This...

Process development and exergy cost sensitivity analysis of a hybrid molten carbonate fuel cell power plant and carbon dioxide capturing process

NASA Astrophysics Data System (ADS)

Mehrpooya, Mehdi; Ansarinasab, Hojat; Moftakhari Sharifzadeh, Mohammad Mehdi; Rosen, Marc A.

2017-10-01

An integrated power plant with a net electrical power output of 3.71 × 105 kW is developed and investigated. The electrical efficiency of the process is found to be 60.1%. The process includes three main sub-systems: molten carbonate fuel cell system, heat recovery section and cryogenic carbon dioxide capturing process. Conventional and advanced exergoeconomic methods are used for analyzing the process. Advanced exergoeconomic analysis is a comprehensive evaluation tool which combines an exergetic approach with economic analysis procedures. With this method, investment and exergy destruction costs of the process components are divided into endogenous/exogenous and avoidable/unavoidable parts. Results of the conventional exergoeconomic analyses demonstrate that the combustion chamber has the largest exergy destruction rate (182 MW) and cost rate (13,100 /h). Also, the total process cost rate can be decreased by reducing the cost rate of the fuel cell and improving the efficiency of the combustion chamber and heat recovery steam generator. Based on the total avoidable endogenous cost rate, the priority for modification is the heat recovery steam generator, a compressor and a turbine of the power plant, in rank order. A sensitivity analysis is done to investigate the exergoeconomic factor parameters through changing the effective parameter variations.

Health and safety economics: limitations of economic appraisal of occupational health services activities in Poland.

PubMed

Rydlewska-Liszkowska, Izabela

2002-01-01

Methods of economic appraisal developed for evaluating activities in health care system may as well be successfully used for evaluating occupational health service activities. This involves the problem of resources management and cost containment not only at the company level, but also at different managerial and institutional levels. The decision makers have to know what resources are spent on occupational health, what is the effectiveness and efficiency of investing in employees health. The key issue of good understanding of the theory and practice of economic appraisal is a precise definition of costs, effectiveness and benefits. Another important area is the identification of information sources and barriers of economic appraisal. The results of the project carried out by the Nofer Institute of Occupational Medicine have provided evidence that defining costs, effectiveness and benefits of preventive activities need to be developed. It becomes even more clear after an analysis of existing limitations of economic appraisal in Polish enterprises.

A review on detection methods used for foodborne pathogens

PubMed Central

Priyanka, B.; Patil, Rajashekhar K.; Dwarakanath, Sulatha

2016-01-01

Foodborne pathogens have been a cause of a large number of diseases worldwide and more so in developing countries. This has a major economic impact. It is important to contain them, and to do so, early detection is very crucial. Detection and diagnostics relied on culture-based methods to begin with and have developed in the recent past parallel to the developments towards immunological methods such as enzyme-linked immunosorbent assays (ELISA) and molecular biology-based methods such as polymerase chain reaction (PCR). The aim has always been to find a rapid, sensitive, specific and cost-effective method. Ranging from culturing of microbes to the futuristic biosensor technology, the methods have had this common goal. This review summarizes the recent trends and brings together methods that have been developed over the years. PMID:28139531

INTERMINGLED SKIN GRAFTING: A VALID TRANSPLANTATION METHOD AT LOW COST

PubMed Central

Domres, B.; Kistler, D.; Rutczynska, J.

2007-01-01

Summary The almost forgotten method of intermingled skin grafting of allogeneic material with small autogeneic islets, once developed in the People's Republic of China, proves the feasibility of permanent healing of even extensive burn wounds, at low cost, and therefore an effective treatment possibility in poorer countries, as well as under conditions of a burn disaster. Intermingled skin grafting obtains a better elasticity of the reconditioned skin as elastic fibres of the allodermis survive, and this results in fewer contractures. From the cosmetic point of view the transplantation of autologous keratinocytes results in a better aesthetic homogeneous texture. PMID:21991087

Institute for Business, Industry and Government: Serving Training Needs Locally.

ERIC Educational Resources Information Center

Gramm, Linda A.

The Institute for Business, Industry and Government was established at Orange County Community College (New York) in April 1984 for the purpose of providing high quality, cost-effective training taught by qualified professionals at convenient locations and to develop methods of measuring training effectiveness. Since its first year of offering…

Effective Design of Educational Virtual Reality Applications for Medicine Using Knowledge-Engineering Techniques

ERIC Educational Resources Information Center

Górski, Filip; Bun, Pawel; Wichniarek, Radoslaw; Zawadzki, Przemyslaw; Hamrol, Adam

2017-01-01

Effective medical and biomedical engineering education is an important problem. Traditional methods are difficult and costly. That is why Virtual Reality is often used for that purpose. Educational medical VR is a well-developed IT field, with many available hardware and software solutions. Current solutions are prepared without methodological…

Vocational Determination Process through School, Industry and Community Involvement. Final Report.

ERIC Educational Resources Information Center

Lutz, John; Staber, Richard A.

Through a school-industry-community council strategies and procedures were developed and tested to identify the most cost effective method to provide selected students with opportunities for nontraditional counseling training and to determine the effect it had on career goal choices. The American College Testing (ACT) Career Planning Program test…

ASSESSMENT OF CHEMICAL EFFECTS ON NEURONAL DIFFERENTIATION USING THE ARRAYSCAN HIGH CONTENT SCREENING SYSTEM

EPA Science Inventory

The development of alternative methods for toxicity testing is driven by the need for scientifically valid data that can be obtained in a rapid and cost-efficient manner. In vitro systems provide a model in which chemical effects on cellular events can be examined using technique...

Can we maximize both value and quality in gynecologic cancer care? A work in progress.

PubMed

Havrilesky, Laura J; Fountain, Cynthia

2014-01-01

Value is defined as desirable health outcomes achieved per monetary unit spent. Comparative effectiveness research and cost-effectiveness research are methods that have been developed to quantify effectiveness and value to inform management decisions. In this article we review the comparative and cost-effectiveness literature in the field of ovarian cancer treatment. Studies have shown that improved ovarian cancer survival is associated with complete primary surgical cytoreduction, with treatment at high volume facilities by subspecialist providers (gynecologic oncologists) and with National Comprehensive Cancer Network (NCCN) guideline-adherent care in both surgical staging and chemotherapy regimens. Intraperitoneal/intravenous chemotherapy (compared with intravenous alone) has been associated with improved survival and cost-effectiveness. Bevacizumab for primary and maintenance therapy has been found to not be cost-effective (even in selective subsets) despite a small progression-free survival (PFS) advantage. For platinum-sensitive recurrent ovarian cancer, secondary cytoreduction and platinum-based combinations are associated with improved overall survival (OS); several platinum-based combinations have also been found cost-effective. For platinum-resistant recurrence, single agent therapy and supportive care are cost-effective compared with combination therapies. Although little prospective clinical research has been done around end-of-life care, one study reported that for platinum-resistant ovarian cancer, palliative intervention would potentially reduce costs and increase quality adjusted life years compared with usual care (based on improvement in quality of life [QOL]). Overall, cost comparisons of individual chemotherapy regimens are highly dependent on market prices of novel therapeutic agents.

Emergency material allocation and scheduling for the application to chemical contingency spills under multiple scenarios.

PubMed

Liu, Jie; Guo, Liang; Jiang, Jiping; Jiang, Dexun; Wang, Peng

2017-01-01

In the emergency management relevant to chemical contingency spills, efficiency emergency rescue can be deeply influenced by a reasonable assignment of the available emergency materials to the related risk sources. In this study, an emergency material scheduling model (EMSM) with time-effective and cost-effective objectives is developed to coordinate both allocation and scheduling of the emergency materials. Meanwhile, an improved genetic algorithm (IGA) which includes a revision operation for EMSM is proposed to identify the emergency material scheduling schemes. Then, scenario analysis is used to evaluate optimal emergency rescue scheme under different emergency pollution conditions associated with different threat degrees based on analytic hierarchy process (AHP) method. The whole framework is then applied to a computational experiment based on south-to-north water transfer project in China. The results demonstrate that the developed method not only could guarantee the implementation of the emergency rescue to satisfy the requirements of chemical contingency spills but also help decision makers identify appropriate emergency material scheduling schemes in a balance between time-effective and cost-effective objectives.

Attitudes of medical students to medical leadership and management: a systematic review to inform curriculum development

PubMed Central

2011-01-01

Background There is a growing acknowledgement that doctors need to develop leadership and management competences to become more actively involved in the planning, delivery and transformation of patient services. We undertook a systematic review of what is known concerning the knowledge, skills and attitudes of medical students regarding leadership and management. Here we report the results pertaining to the attitudes of students to provide evidence to inform curriculum development in this developing field of medical education. Methods We searched major electronic databases and citation indexes within the disciplines of medicine, education, social science and management. We undertook hand searching of major journals, and reference and citation tracking. We accessed websites of UK medical institutions and contacted individuals working within the field. Results 26 studies were included. Most were conducted in the USA, using mainly quantitative methods. We used inductive analysis of the topics addressed by each study to identity five main content areas: Quality Improvement; Managed Care, Use of Resources and Costs; General Leadership and Management; Role of the Doctor, and Patient Safety. Students have positive attitudes to clinical practice guidelines, quality improvement techniques and multidisciplinary teamwork, but mixed attitudes to managed care, cost containment and medical error. Education interventions had variable effects on students' attitudes. Medical students perceive a need for leadership and management education but identified lack of curriculum time and disinterest in some activities as potential barriers to implementation. Conclusions The findings from our review may reflect the relatively little emphasis given to leadership and management in medical curricula. However, students recognise a need to develop leadership and management competences. Although further work needs to be undertaken, using rigorous methods, to identify the most effective and cost-effective curriculum innovations, this review offers the only currently available summary of work examining the attitudes of students to this important area of development for future doctors. PMID:22082174

Cost-effectiveness analysis of colorectal cancer screening methods in Iran.

PubMed

Allameh, Zahra; Davari, Majid; Emami, Mohammad Hasan

2011-03-01

Screening can prevent colorectal cancer from becoming advanced by early detection of precancerous lesions. Cost-effectiveness analysis of colorectal cancer screening methods is highly necessary due to increased prevalence, decreased age at onset and the limited budget in Iran. Methods of screening currently available in Iran were selected. A systematic search revealed the sensitivity and specificity of each method. For this study, a model for a 20 year screening period of a population of 100,000 apparently healthy persons of ages 45-65 years in Isfahan Province was used. The cost-effectiveness of each method and the ratio of cost-effectiveness were calculated based on this model. The most and the least effective methods were CT colonography and fecal occult blood test, respectively. The highest and lowest expenditures in the governmental sector were related to fecal occult blood test and flexible sigmoidoscopy and in the private sector, to CT colonography and fecal occult blood test, respectively. The cost per cancer detected in 20 years of screening in the governmental sector was 0.28, 0.22 and 0.42 billion Rials, respectively for screening by colonoscopy, flexible sigmoidoscopy and fecal occult blood test. In the private sector, these were 1.54 (colonoscopy), 1.68 (flexible sigmoidoscopy), and 1.60 (fecal occult blood test) billion and 2.58 billion Rials for CT colonography, respectively. Although CT colonography is the most effective method, it needs a budget of 2.58 billion Rials for each screened patient. If costs in the governmental sector are considered, flexible sigmoidoscopy would be the most cost-effective method for screening the 45 - 65-year-old population in Iran.

Assessment of transparency of cost estimates in economic evaluations of patient safety programmes.

PubMed

Fukuda, Haruhisa; Imanaka, Yuichi

2009-06-01

Transparency of costing is essential for decision-makers who require information on the efficiency of a health care programme, because effective decisions depend largely on applicability to their settings. The main objectives of this study were to assess published studies for transparency of cost estimates. We first developed criteria with two axes by reviewing publications dealing with economic evaluations and cost accounting studies: clarification of the scope of costing and accuracy of method evaluating costs. We then performed systematic searches of the literature for studies which estimated prevention costs and assessed the transparency and accuracy of costing based on our criteria. Forty studies met the inclusion criteria. Half of the studies reported data for both the quantity and unit price of programmes in regard to prevention costs. Although 30 studies estimated costs of adverse events, 19 of these described the scope of costing only, and just five studies used a micro-costing method. Among 30 studies that estimated 'gross cost savings' and 'net cost savings', there was a huge discrepancy in labels. Even if a cost study was conducted in accordance with existing techniques of economic evaluation which mostly paid attention to internal validity of cost estimates, without adequate explanation of the process of costing, reproducibility cannot be assured and the study may lose its value as scientific information. This study found that there is tremendous room for improvement.

Pharmacoeconomics

PubMed Central

Hughes, Dyfrig A

2012-01-01

Pharmacoeconomics is an essential component of health technology assessment and the appraisal of medicines for use by UK National Health Service (NHS) patients. As a comparatively young discipline, its methods continue to evolve. Priority research areas for development include methods for synthesizing indirect comparisons when head-to-head trials have not been performed, synthesizing qualitative evidence (for example, stakeholder views), addressing the limitations of the EQ-5D tool for assessing quality of life, including benefits not captured in quality-adjusted life years (QALYs), ways of assessing valuation methods (for determining utility scores), extrapolation of costs and benefits beyond those observed in trials, early estimation of cost-effectiveness (including mechanism-based economic evaluation), methods for incorporating the impact of non-adherence and the role of behavioural economics in influencing patients and prescribers. PMID:22360714

Prevention methods for pest control and their use in Poland.

PubMed

Matyjaszczyk, Ewa

2015-04-01

Prevention methods can still be a cost-effective and efficient tool for pest control. Rational use of prevention methods is a feasible way to reduce dependency on chemical protection in agriculture. Costs, workload and farmers' awareness are key issues, however. In Poland, crop rotation is used as a method for pest control only to a limited extent owing to the high share of cereals in the crop structure. The choice of resistant varieties is satisfactory, but farmers should make use of qualified seed material more often. Liming is recommended on the majority of farms on account of widespread soil acidity. Favourable aspects as regards the prevention of pest development are biodiversity and the popularity of prevention cultivation techniques. © 2014 Society of Chemical Industry.

Cost-effective Expression and Purification of Antimicrobial and Host Defense Peptides in Escherichia coli

PubMed Central

Bommarius, B.; Jenssen, H.; Elliott, M.; Kindrachuk, J.; Pasupuleti, Mukesh; Gieren, H; Jaeger, K.-E.; Hancock, R.E. W.

2010-01-01

Cationic antimicrobial host defense peptides (HDPs) combat infection by directly killing a wide variety of microbes, and/or modulating host immunity. HDPs have great therapeutic potential against antibiotic-resistant bacteria, viruses and even parasites, but there are substantial roadblocks to their therapeutic application. High manufacturing costs associated with amino acid precursors have limited the delivery of inexpensive therapeutics through industrial-scale chemical synthesis. Conversely, the production of peptides in bacteria by recombinant DNA technology has been impeded by the antimicrobial activity of these peptides and their susceptibility to proteolytic degradation, while subsequent purification of recombinant peptides often requires multiple steps and has not been cost-effective. Here we have developed methodologies appropriate for large-scale industrial production of HDPs; in particular, we describe (i) a method, using fusions to SUMO, for producing high yields of intact recombinant HDPs in bacteria without significant toxicity; and (ii) a simplified 2-step purification method appropriate for industrial use. We have used this method to produce seven HDPs to date (IDR1, MX226, LL37, CRAMP, HHC-10, E5 and E6). Using this technology, pilot-scale fermentation (10 L) was performed to produce large quantities of biologically active cationic peptides. Together, these data indicate that this new method represents a cost-effective means to enable commercial enterprises to produce HDPs in large-scale under Good Laboratory Manufacturing Practice (GMP) conditions for therapeutic application in humans. PMID:20713107

MRI-Guided Focused Ultrasound Surgery for Uterine Fibroid Treatment: A Cost-Effectiveness Analysis

PubMed Central

Kong, Chung Y.; Omer, Zehra B.; Pandharipande, Pari V.; Swan, J. Shannon; Srouji, Serene; Gazelle, G. Scott; Fennessy, Fiona M.

2015-01-01

Objective To evaluate the cost-effectiveness of a treatment strategy for symptomatic uterine fibroids that employs Magnetic Resonance guided Focused Ultrasound (MRgFUS) as a first-line therapy relative to uterine artery embolization (UAE) or abdominal hysterectomy (HYST). Materials and Methods We developed a decision-analytic model to compare the cost-effectiveness of three treatment strategies: MRgFUS, UAE and HYST. Short and long-term utilities specific to each treatment were incorporated, allowing us to account for differences in quality of life across the strategies considered. Lifetime costs and quality-adjusted life-years (QALYs) were calculated for each strategy. An incremental cost-effectiveness analysis was performed, using a societal willingness-to-pay (WTP) threshold of $50,000 per QALY to designate a strategy as cost-effective. Sensitivity analysis was performed on all key model parameters. Results In the base-case analysis, in which treatment for symptomatic fibroids started at age 40, UAE was the most effective and expensive strategy (22.81 QALYs, $22,164), followed by MRgFUS (22.80 QALYs, $19,796) and HYST (22.60 QALYs, $13,291). MRgFUS was cost-effective relative to HYST, with an associated incremental cost-effectiveness ratio (ICER) of $33,110/QALY. MRgFUS was also cost-effective relative to UAE – the ICER of UAE relative to MRgFUS ($270,057) far exceeded the WTP threshold of $50,000/QALY. In sensitivity analysis, results were robust to changes in most parameters, but were sensitive to changes in probabilities of recurrence and symptom relief following certain procedures, and quality of life associated with symptomatic fibroids. Conclusions MRgFUS is cost-effective relative to both UAE and hysterectomy for the treatment of women with symptomatic fibroids. PMID:25055272

Wettability measurement apparatus for porous material using the modified Washburn method

NASA Astrophysics Data System (ADS)

Thakker, Manish; Karde, Vikram; Shah, Dinesh O.; Shukla, Premal; Ghoroi, Chinmay

2013-12-01

In this work a cost-effective instrument for measuring the wettability of powder materials was designed and developed, which works on the modified Washburn method. The instrument measures the mass gain against time due to penetration of the liquid into the powder materials using a microbalance and LabVIEW-based data acquisition system. The wettability characteristic of different powders was determined from the contact angle using the modified Washburn equation. To demonstrate the performance of the developed instrument, the wettability of as-received corn starch and nano-coated corn starch powders was estimated with water as a test liquid. The corn starch powders coated with hydrophilic grade (Aerosil 200P) and hydrophobic grade (Aerosil R972) nanoparticles at different coating levels showed expected changes in their contact angle. Some of the results were also verified against the available standard instrument for wettability measurement and found to be consistent. The present configuration of the instrument costs about 500 US which is 15 to 20 times less than the available advanced models. The developed instrument is thus a cost-effective solution for wettability measurement which can be used for materials in food processing, pharmaceuticals, horticulture, textile manufacturing, civil engineering etc. The developed instrument is expected to help many small scale industries or research labs who cannot afford an expensive instrument for wettability studies.

Review Article "Valuating the intangible effects of natural hazards - review and analysis of the costing methods"

NASA Astrophysics Data System (ADS)

Markantonis, V.; Meyer, V.; Schwarze, R.

2012-05-01

The "intangible" or "non-market" effects are those costs of natural hazards which are not, or at least not easily measurable in monetary terms, as for example, impacts on health, cultural heritage or the environment. The intangible effects are often not included in costs assessments of natural hazards leading to an incomplete and biased cost assessment. However, several methods exist which try to estimate these effects in a non-monetary or monetary form. The objective of the present paper is to review and evaluate methods for estimating the intangible effects of natural hazards, specifically related to health and environmental effects. Existing methods are analyzed and compared using various criteria, research gaps are identified, application recommendations are provided, and valuation issues that should be addressed by the scientific community are highlighted.

Effectiveness and cost-effectiveness of salicylic acid and cryotherapy for cutaneous warts. An economic decision model.

PubMed

Thomas, K S; Keogh-Brown, M R; Chalmers, J R; Fordham, R J; Holland, R C; Armstrong, S J; Bachmann, M O; Howe, A H; Rodgers, S; Avery, A J; Harvey, I; Williams, H C

2006-08-01

To estimate the costs of commonly used treatments for cutaneous warts, as well as their health benefits and risk. To create an economic decision model to evaluate the cost-effectiveness of these treatments, and, as a result, assess whether a randomised controlled trial (RCT) would be feasible and cost-effective. Focus groups, structured interviews and observation of practice. Postal survey sent to 723 patients. A recently updated Cochrane systematic review and published cost and prescribing data. Primary and secondary data collection methods were used to inform the development of an economic decision model. Data from the postal survey provided estimates of the effectiveness of wart treatments in a primary care setting. These estimates were compared with outcomes reported in the Cochrane review of wart treatment, which were largely obtained from RCTs conducted in secondary care. A decision model was developed including a variety of over-the-counter (OTC) and GP-prescribed treatments. The model simulated 10,000 patients and adopted a societal perspective. OTC treatments were used by a substantial number of patients (57%) before attending the GP surgery. By far the most commonly used OTC preparation was salicylic acid (SA). The results of the economic model suggested that of the treatments prescribed by a GP, the most cost-effective treatment was SA, with an incremental cost-effectiveness ratio (ICER) of 2.20 pound/% cured. The ICERs for cryotherapy varied widely (from 1.95 to 7.06 pound/% cured) depending on the frequency of applications and the mode of delivery. The most cost-effective mode of delivery was through nurse-led cryotherapy clinics (ICER = 1.95 pound/% cured) and this could be a cost-effective alternative to GP-prescribed SA. Overall, the OTC therapies were the most cost-effective treatment options. ICERs ranged from 0.22 pound/% cured for OTC duct tape and 0.76 pound/% cured for OTC cryotherapy to 1.12 pound/% cured for OTC SA. However, evidence in support of OTC duct tape and OTC cryotherapy is very limited. Side-effects were commonly reported for both SA and cryotherapy, particularly a burning sensation, pain and blistering. Cryotherapy delivered by a doctor is an expensive option for the treatment of warts in primary care. Alternative options such as GP-prescribed SA and nurse-led cryotherapy clinics provide more cost-effective alternatives, but are still expensive compared with self-treatment. Given the minor nature of most cutaneous warts, coupled with the fact that the majority spontaneously resolve in time, it may be concluded that a shift towards self-treatment is warranted. Although both duct tape and OTC cryotherapy appear promising new self-treatment options from both a cost and an effectiveness perspective, more research is required to confirm the efficacy of these two methods of wart treatment. If these treatments are shown to be as cost-effective as or more cost-effective than conventional treatments, then a shift in service delivery away from primary care towards more OTC treatment is likely. A public awareness campaign would be useful to educate patients about the self-limiting nature of warts and the possible alternative OTC treatment options available. Two future RCTs are recommended for consideration: a trial of SA compared with nurse-led cryotherapy in primary care, and a trial of home treatments. Greater understanding of the efficacy of these home treatments will give doctors a wider choice of treatment options, and may help to reduce the overall demand for cryotherapy in primary care.

Mediterranean studies of cardiovascular disease and hyperglycemia: analytical modeling of population socio-economic transitions (MedCHAMPS)--rationale and methods.

PubMed

Maziak, Wasim; Critchley, Julia; Zaman, Shahaduz; Unwin, Nigel; Capewell, Simon; Bennett, Kathleen; Unal, Belgin; Husseini, Abdullatif; Romdhane, Habiba Ben; Phillimore, Peter

2013-08-01

In response to the escalating epidemic of cardiovascular disease (CVD) in the Mediterranean Region (MR), an international collaboration aiming at understanding the burden of CVD and evaluating cost-effective strategies to combat it was recently established. This paper describes the rationale and methods of the project MedCHAMPS to disseminate this successful experience. The framework of MedCHAMPS is exceptional in combining multiple disciplines (e.g. epidemiology, anthropology, economics), countries [Turkey, Syria, occupied Palestinian territory (oPt), Tunisia, UK, Ireland], research methods (situational and policy analysis, quantitative and qualitative studies, statistical modeling), and involving local stakeholders at all levels to assess trends of CVD/diabetes in the society and attributes of the local health care systems to provide optimal policy recommendations to reduce the burden of CVD/diabetes. MedCHAMPS provides policy makers in the MR and beyond needed guidance about the burden of CVD, and best cost-effective ways to combat it. Our approach of building developed-developing countries collaboration also provides a roadmap for other researchers seeking to build research base into CVD epidemiology and prevention in developing countries.

Developing Appropriate Methods for Cost-Effectiveness Analysis of Cluster Randomized Trials

PubMed Central

Gomes, Manuel; Ng, Edmond S.-W.; Nixon, Richard; Carpenter, James; Thompson, Simon G.

2012-01-01

Aim. Cost-effectiveness analyses (CEAs) may use data from cluster randomized trials (CRTs), where the unit of randomization is the cluster, not the individual. However, most studies use analytical methods that ignore clustering. This article compares alternative statistical methods for accommodating clustering in CEAs of CRTs. Methods. Our simulation study compared the performance of statistical methods for CEAs of CRTs with 2 treatment arms. The study considered a method that ignored clustering—seemingly unrelated regression (SUR) without a robust standard error (SE)—and 4 methods that recognized clustering—SUR and generalized estimating equations (GEEs), both with robust SE, a “2-stage” nonparametric bootstrap (TSB) with shrinkage correction, and a multilevel model (MLM). The base case assumed CRTs with moderate numbers of balanced clusters (20 per arm) and normally distributed costs. Other scenarios included CRTs with few clusters, imbalanced cluster sizes, and skewed costs. Performance was reported as bias, root mean squared error (rMSE), and confidence interval (CI) coverage for estimating incremental net benefits (INBs). We also compared the methods in a case study. Results. Each method reported low levels of bias. Without the robust SE, SUR gave poor CI coverage (base case: 0.89 v. nominal level: 0.95). The MLM and TSB performed well in each scenario (CI coverage, 0.92–0.95). With few clusters, the GEE and SUR (with robust SE) had coverage below 0.90. In the case study, the mean INBs were similar across all methods, but ignoring clustering underestimated statistical uncertainty and the value of further research. Conclusions. MLMs and the TSB are appropriate analytical methods for CEAs of CRTs with the characteristics described. SUR and GEE are not recommended for studies with few clusters. PMID:22016450

Maximizing cost-effectiveness by adjusting treatment strategy according to glaucoma severity

PubMed Central

Guedes, Ricardo Augusto Paletta; Guedes, Vanessa Maria Paletta; Gomes, Carlos Eduardo de Mello; Chaoubah, Alfredo

2016-01-01

Abstract Background: The aim of this study is to determine the most cost-effective strategy for the treatment of primary open-angle glaucoma (POAG) in Brazil, from the payer's perspective (Brazilian Public Health System) in the setting of the Glaucoma Referral Centers. Methods: Study design was a cost-effectiveness analysis of different treatment strategies for POAG. We developed 3 Markov models (one for each glaucoma stage: early, moderate and advanced), using a hypothetical cohort of POAG patients, from the perspective of the Brazilian Public Health System (SUS) and a horizon of the average life expectancy of the Brazilian population. Different strategies were tested according to disease severity. For early glaucoma, we compared observation, laser and medications. For moderate glaucoma, medications, laser and surgery. For advanced glaucoma, medications and surgery. Main outcome measures were ICER (incremental cost-effectiveness ratio), medical direct costs and QALY (quality-adjusted life year). Results: In early glaucoma, both laser and medical treatment were cost-effective (ICERs of initial laser and initial medical treatment over observation only, were R$ 2,811.39/QALY and R$ 3,450.47/QALY). Compared to observation strategy, the two alternatives have provided significant gains in quality of life. In moderate glaucoma population, medical treatment presented the highest costs among treatment strategies. Both laser and surgery were highly cost-effective in this group. For advanced glaucoma, both tested strategies were cost-effective. Starting age had a great impact on results in all studied groups. Initiating glaucoma therapy using laser or surgery were more cost-effective, the younger the patient. Conclusion: All tested treatment strategies for glaucoma provided real gains in quality of life and were cost-effective. However, according to the disease severity, not all strategies provided the same cost-effectiveness profile. Based on our findings, there should be a preferred strategy for each glaucoma stage, according to a cost-effectiveness ratio ranking. PMID:28033286

OPTIMIZATION OF INTEGRATED URBAN WET-WEATHER CONTROL STRATEGIES

EPA Science Inventory

An optimization method for urban wet weather control (WWC) strategies is presented. The developed optimization model can be used to determine the most cost-effective strategies for the combination of centralized storage-release systems and distributed on-site WWC alternatives. T...

Special Transportation Services for the Elderly and Handicapped in Baton Rouge

DOT National Transportation Integrated Search

1976-11-01

In July 1972 the Urban Mass Transportation Administration, under its Service Development Program, awarded an 18-month grant to the city of Baton Rouge to demonstrate the feasibility of establishing a modern, cost-effective method of transporting the ...

A novel method to prepare L-Arabinose from xylose mother liquor by yeast-mediated biopurification

PubMed Central

2011-01-01

Background L-arabinose is an important intermediate for anti-virus drug synthesis and has also been used in food additives for diets-controlling in recent years. Commercial production of L-arabinose is a complex progress consisting of acid hydrolysis of gum arabic, followed by multiple procedures of purification, thus making high production cost. Therefore, there is a biotechnological and commercial interest in the development of new cost-effective and high-performance methods for obtaining high purity grade L-arabinose. Results An alternative, economical method for purifying L-arabinose from xylose mother liquor was developed in this study. After screening 306 yeast strains, a strain of Pichia anomala Y161 was selected as it could effectively metabolize other sugars but not L-arabinose. Fermentation in a medium containing xylose mother liquor permitted enrichment of L-arabinose by a significant depletion of other sugars. Biochemical analysis of this yeast strain confirmed that its poor capacity for utilizing L-arabinose was due to low activities of the enzymes required for the metabolism of this sugar. Response surface methodology was employed for optimization the fermentation conditions in shake flask cultures. The optimum conditions were: 75 h fermentation time, at 32.5°C, in a medium containing 21% (v/v) xylose mother liquor. Under these conditions, the highest purity of L-arabinose reached was 86.1% of total sugar, facilitating recovery of white crystalline L-arabinose from the fermentation medium by simple methods. Conclusion Yeast-mediated biopurification provides a dynamic method to prepare high purity of L-arabinose from the feedstock solution xylose mother liqour, with cost-effective and high-performance properties. PMID:21649890

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

Using Parameter Constraints to Choose State Structures in Cost-Effectiveness Modelling.

PubMed

Thom, Howard; Jackson, Chris; Welton, Nicky; Sharples, Linda

2017-09-01

This article addresses the choice of state structure in a cost-effectiveness multi-state model. Key model outputs, such as treatment recommendations and prioritisation of future research, may be sensitive to state structure choice. For example, it may be uncertain whether to consider similar disease severities or similar clinical events as the same state or as separate states. Standard statistical methods for comparing models require a common reference dataset but merging states in a model aggregates the data, rendering these methods invalid. We propose a method that involves re-expressing a model with merged states as a model on the larger state space in which particular transition probabilities, costs and utilities are constrained to be equal between states. This produces a model that gives identical estimates of cost effectiveness to the model with merged states, while leaving the data unchanged. The comparison of state structures can be achieved by comparing maximised likelihoods or information criteria between constrained and unconstrained models. We can thus test whether the costs and/or health consequences for a patient in two states are the same, and hence if the states can be merged. We note that different structures can be used for rates, costs and utilities, as appropriate. We illustrate our method with applications to two recent models evaluating the cost effectiveness of prescribing anti-depressant medications by depression severity and the cost effectiveness of diagnostic tests for coronary artery disease. State structures in cost-effectiveness models can be compared using standard methods to compare constrained and unconstrained models.

Development of optimized, graded-permeability axial groove heat pipes

NASA Technical Reports Server (NTRS)

Kapolnek, Michael R.; Holmes, H. Rolland

1988-01-01

Heat pipe performance can usually be improved by uniformly varying or grading wick permeability from end to end. A unique and cost effective method for grading the permeability of an axial groove heat pipe is described - selective chemical etching of the pipe casing. This method was developed and demonstrated on a proof-of-concept test article. The process improved the test article's performance by 50 percent. Further improvement is possible through the use of optimally etched grooves.

Cost-Effectiveness of HBV and HCV Screening Strategies – A Systematic Review of Existing Modelling Techniques

PubMed Central

Geue, Claudia; Wu, Olivia; Xin, Yiqiao; Heggie, Robert; Hutchinson, Sharon; Martin, Natasha K.; Fenwick, Elisabeth; Goldberg, David

2015-01-01

Introduction Studies evaluating the cost-effectiveness of screening for Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV) are generally heterogeneous in terms of risk groups, settings, screening intervention, outcomes and the economic modelling framework. It is therefore difficult to compare cost-effectiveness results between studies. This systematic review aims to summarise and critically assess existing economic models for HBV and HCV in order to identify the main methodological differences in modelling approaches. Methods A structured search strategy was developed and a systematic review carried out. A critical assessment of the decision-analytic models was carried out according to the guidelines and framework developed for assessment of decision-analytic models in Health Technology Assessment of health care interventions. Results The overall approach to analysing the cost-effectiveness of screening strategies was found to be broadly consistent for HBV and HCV. However, modelling parameters and related structure differed between models, producing different results. More recent publications performed better against a performance matrix, evaluating model components and methodology. Conclusion When assessing screening strategies for HBV and HCV infection, the focus should be on more recent studies, which applied the latest treatment regimes, test methods and had better and more complete data on which to base their models. In addition to parameter selection and associated assumptions, careful consideration of dynamic versus static modelling is recommended. Future research may want to focus on these methodological issues. In addition, the ability to evaluate screening strategies for multiple infectious diseases, (HCV and HIV at the same time) might prove important for decision makers. PMID:26689908

Interactive internet-based clinical education: an efficient and cost-savings approach to point-of-care test training.

PubMed

Knapp, Herschel; Chan, Kee; Anaya, Henry D; Goetz, Matthew B

2011-06-01

We successfully created and implemented an effective HIV rapid testing training and certification curriculum using traditional in-person training at multiple sites within the U.S. Department of Veterans Affairs (VA) Healthcare System. Considering the multitude of geographically remote facilities in the nationwide VA system, coupled with the expansion of HIV diagnostics, we developed an alternate training method that is affordable, efficient, and effective. Using materials initially developed for in-person HIV rapid test in-services, we used a distance learning model to offer this training via live audiovisual online technology to educate clinicians at a remote outpatient primary care VA facility. Participants' evaluation metrics showed that this form of remote education is equivalent to in-person training; additionally, HIV testing rates increased considerably in the months following this intervention. Although there is a one-time setup cost associated with this remote training protocol, there is potential cost savings associated with the point-of-care nurse manager's time productivity by using the Internet in-service learning module for teaching HIV rapid testing. If additional in-service training modules are developed into Internet-based format, there is the potential for additional cost savings. Our cost analysis demonstrates that the remote in-service method provides a more affordable and efficient alternative compared with in-person training. The online in-service provided training that was equivalent to in-person sessions based on first-hand supervisor observation, participant satisfaction surveys, and follow-up results. This method saves time and money, requires fewer personnel, and affords access to expert trainers regardless of geographic location. Further, it is generalizable to training beyond HIV rapid testing. Based on these consistent implementation successes, we plan to expand use of online training to include remote VA satellite facilities spanning several states for a variety of diagnostic devices. Ultimately, Internet-based training has the potential to provide "big city" quality of care to patients at remote (rural) clinics.

Cost-benefit analysis of biopsy methods for suspicious mammographic lesions; discussion 994-5.

PubMed

Fahy, B N; Bold, R J; Schneider, P D; Khatri, V; Goodnight, J E

2001-09-01

Stereotactic core biopsy (SCB) is more cost-effective than needle-localized biopsy (NLB) for evaluation and treatment of mammographic lesions. A computer-generated mathematical model was developed based on clinical outcome modeling to estimate costs accrued during evaluation and treatment of suspicious mammographic lesions. Total costs were determined for evaluation and subsequent treatment of cancer when either SCB or NLB was used as the initial biopsy method. Cost was estimated by the cumulative work relative value units accrued. The risk of malignancy based on the Breast Imaging Reporting Data System (BIRADS) score and mammographic suspicion of ductal carcinoma in situ were varied to simulate common clinical scenarios. Total cost accumulated during evaluation and subsequent surgical therapy (if required). Evaluation of BIRADS 5 lesions (highly suggestive, risk of malignancy = 90%) resulted in equivalent relative value units for both techniques (SCB, 15.54; NLB, 15.47). Evaluation of lesions highly suspicious for ductal carcinoma in situ yielded similar total treatment relative value units (SCB, 11.49; NLB, 10.17). Only for evaluation of BIRADS 4 lesions (suspicious abnormality, risk of malignancy = 34%) was SCB more cost-effective than NLB (SCB, 7.65 vs. NLB, 15.66). No difference in cost-benefit was found when lesions highly suggestive of malignancy (BIRADS 5) or those suspicious for ductal carcinoma in situ were evaluated initially with SCB vs. NLB, thereby disproving the hypothesis. Only for intermediate-risk lesions (BIRADS 4) did initial evaluation with SCB yield a greater cost savings than with NLB.

Mandible reconstruction with free fibula flaps: Outcome of a cost-effective individual planning concept compared with virtual surgical planning.

PubMed

Rommel, Niklas; Kesting, Marco Rainer; Rohleder, Nils Hagen; Bauer, Florian Martin Josef; Wolff, Klaus-Dietrich; Weitz, Jochen

2017-08-01

The free osteomyocutaneous fibular flap has become one of the primary options for mandibular reconstruction, because of the later introduction and development of virtual surgical planning (VSP). However, VSP is associated with high additional pre-operative effort and costs. Therefore, the purpose of the study was to develop a new individual cost-effective pre-operative planning concept for free fibula mandible reconstruction and to compare it with VSP regarding clinical parameters and post-operative outcome. 31 patients undergoing mandibular reconstruction with a microvascular free fibular flap were divided into two groups and retrospectively reviewed. For the first group A (18 of 31 patients), an individual method with stererolithographic (STL) models, silicon templates and hand-made cutting guides was used (about 250 € planning costs/patient). For the second group B (13 of 31 patients), VSP including pre-fabricated cutting guides was used (about 2500 € planning costs/patient). We found no statistically significant differences with respect to intra-operative time of mandibular reconstruction, duration of hospitalisation or post-operative complications between the two groups (p ≥ 0.05). The surgical outcomes and operative efficiency of this individual and cost-effective planning concept are comparable with the much more expensive complete VSP concept. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Proximal sensing for soil carbon accounting

NASA Astrophysics Data System (ADS)

England, Jacqueline R.; Viscarra Rossel, Raphael A.

2018-05-01

Maintaining or increasing soil organic carbon (C) is vital for securing food production and for mitigating greenhouse gas (GHG) emissions, climate change, and land degradation. Some land management practices in cropping, grazing, horticultural, and mixed farming systems can be used to increase organic C in soil, but to assess their effectiveness, we need accurate and cost-efficient methods for measuring and monitoring the change. To determine the stock of organic C in soil, one requires measurements of soil organic C concentration, bulk density, and gravel content, but using conventional laboratory-based analytical methods is expensive. Our aim here is to review the current state of proximal sensing for the development of new soil C accounting methods for emissions reporting and in emissions reduction schemes. We evaluated sensing techniques in terms of their rapidity, cost, accuracy, safety, readiness, and their state of development. The most suitable method for measuring soil organic C concentrations appears to be visible-near-infrared (vis-NIR) spectroscopy and, for bulk density, active gamma-ray attenuation. Sensors for measuring gravel have not been developed, but an interim solution with rapid wet sieving and automated measurement appears useful. Field-deployable, multi-sensor systems are needed for cost-efficient soil C accounting. Proximal sensing can be used for soil organic C accounting, but the methods need to be standardized and procedural guidelines need to be developed to ensure proficient measurement and accurate reporting and verification. These are particularly important if the schemes use financial incentives for landholders to adopt management practices to sequester soil organic C. We list and discuss requirements for developing new soil C accounting methods based on proximal sensing, including requirements for recording, verification, and auditing.

Modelling the Cost Effectiveness of Disease-Modifying Treatments for Multiple Sclerosis

PubMed Central

Thompson, Joel P.; Abdolahi, Amir; Noyes, Katia

2013-01-01

Several cost-effectiveness models of disease-modifying treatments (DMTs) for multiple sclerosis (MS) have been developed for different populations and different countries. Vast differences in the approaches and discrepancies in the results give rise to heated discussions and limit the use of these models. Our main objective is to discuss the methodological challenges in modelling the cost effectiveness of treatments for MS. We conducted a review of published models to describe the approaches taken to date, to identify the key parameters that influence the cost effectiveness of DMTs, and to point out major areas of weakness and uncertainty. Thirty-six published models and analyses were identified. The greatest source of uncertainty is the absence of head-to-head randomized clinical trials. Modellers have used various techniques to compensate, including utilizing extension trials. The use of large observational cohorts in recent studies aids in identifying population-based, ‘real-world’ treatment effects. Major drivers of results include the time horizon modelled and DMT acquisition costs. Model endpoints must target either policy makers (using cost-utility analysis) or clinicians (conducting cost-effectiveness analyses). Lastly, the cost effectiveness of DMTs outside North America and Europe is currently unknown, with the lack of country-specific data as the major limiting factor. We suggest that limited data should not preclude analyses, as models may be built and updated in the future as data become available. Disclosure of modelling methods and assumptions could improve the transferability and applicability of models designed to reflect different healthcare systems. PMID:23640103

Noise detection in heart sound recordings.

PubMed

Zia, Mohammad K; Griffel, Benjamin; Fridman, Vladimir; Saponieri, Cesare; Semmlow, John L

2011-01-01

Coronary artery disease (CAD) is the leading cause of death in the United States. Although progression of CAD can be controlled using drugs and diet, it is usually detected in advanced stages when invasive treatment is required. Current methods to detect CAD are invasive and/or costly, hence not suitable as a regular screening tool to detect CAD in early stages. Currently, we are developing a noninvasive and cost-effective system to detect CAD using the acoustic approach. This method identifies sounds generated by turbulent flow through partially narrowed coronary arteries to detect CAD. The limiting factor of this method is sensitivity to noises commonly encountered in the clinical setting. Because the CAD sounds are faint, these noises can easily obscure the CAD sounds and make detection impossible. In this paper, we propose a method to detect and eliminate noise encountered in the clinical setting using a reference channel. We show that our method is effective in detecting noise, which is essential to the success of the acoustic approach.

Humidity Sensing Properties of Paper Substrates and Their Passivation with ZnO Nanoparticles for Sensor Applications

PubMed Central

Niarchos, Georgios; Dubourg, Georges; Afroudakis, Georgios; Georgopoulos, Markos; Tsouti, Vasiliki; Makarona, Eleni; Crnojevic-Bengin, Vesna; Tsamis, Christos

2017-01-01

In this paper, we investigated the effect of humidity on paper substrates and propose a simple and low-cost method for their passivation using ZnO nanoparticles. To this end, we built paper-based microdevices based on an interdigitated electrode (IDE) configuration by means of a mask-less laser patterning method on simple commercial printing papers. Initial resistive measurements indicate that a paper substrate with a porous surface can be used as a cost-effective, sensitive and disposable humidity sensor in the 20% to 70% relative humidity (RH) range. Successive spin-coated layers of ZnO nanoparticles then, control the effect of humidity. Using this approach, the sensors become passive to relative humidity changes, paving the way to the development of ZnO-based gas sensors on paper substrates insensitive to humidity. PMID:28273847

Control of Fine Particulate (PM2.5) Emissions from Restaurant Operations.

PubMed

Whynot, Jill; Quinn, Gary; Perryman, Pamela; Votlucka, Peter

1999-09-01

This paper describes efforts to reduce particulate matter (PM) emissions from restaurant operations, including application of an existing control method to a new equipment type. Commercial charbroiling in the South Coast Air Basin results in emissions of approximately 10 tons/day of fine particulate matter ( PM 2.5) and 1.3 tons/day of volatile organic compounds (VOCs). Over a seven-year period, the South Coast Air Quality Management District worked with industry to develop test methods for measuring emissions from various cooking operations, evaluate control technologies, and develop a rule to reduce these emissions. Of the two basic types of charbroilers-chain-driven and underfired-underfired produce four times the emissions when equivalent amounts of product are cooked. Cost-effective control technology is currently available only for chain-driven charbroilers. The application of flameless catalytic oxidizers to chain-driven charbroilers was found to effectively reduce emissions by at least 83% and is cost-effective. The catalysts have been used worldwide at restaurants for several years. Research efforts are underway to identify control options for underfired charbroilers. Implementation of Rule 1138, Control of Emissions from Restaurant Operations, adopted November 14, 1997, will result in reductions of 0.5 tons/day of PM 2.5 and 0.2 tons/day of VOCs. Future rules will result in reductions from underfired charbroilers and possibly other restaurant equipment when cost-effective solutions are available.

Control of fine particulate (PM2.5) emissions from restaurant operations.

PubMed

Whynot, J; Quinn, G; Perryman, P; Votlucka, P

1999-09-01

This paper describes efforts to reduce particulate matter (PM) emissions from restaurant operations, including application of an existing control method to a new equipment type. Commercial charbroiling in the South Coast Air Basin results in emissions of approximately 10 tons/day of fine particulate matter (PM2.5) and 1.3 tons/day of volatile organic compounds (VOCs). Over a seven-year period, the South Coast Air Quality Management District worked with industry to develop test methods for measuring emissions from various cooking operations, evaluate control technologies, and develop a rule to reduce these emissions. Of the two basic types of charbroilers--chain-driven and underfired--underfired produce four times the emissions when equivalent amounts of product are cooked. Cost-effective control technology is currently available only for chain-driven charbroilers. The application of flameless catalytic oxidizers to chain-driven charbroilers was found to effectively reduce emissions by at least 83% and is cost-effective. The catalysts have been used worldwide at restaurants for several years. Research efforts are underway to identify control options for underfired charbroilers. Implementation of Rule 1138, Control of Emissions from Restaurant Operations, adopted November 14, 1997, will result in reductions of 0.5 tons/day of PM2.5 and 0.2 tons/day of VOCs. Future rules will result in reductions from underfired charbroilers and possibly other restaurant equipment when cost-effective solutions are available.

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-06-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.« less

A pilot study to evaluate the feasibility of using willingness to pay as a measure of value in cancer supportive care: an assessment of amifostine cytoprotection.

PubMed

Dranitsaris, G

1997-11-01

The most commonly used method for pharmacoeconomic studies has been the cost-effectiveness analysis (CEA), where the outcome is expressed as an incremental cost per unit of effectiveness (e.g. quality-adjusted life years). Although CEA is a valuable tool for identifying therapies that are more effective and less expensive, deficiencies develop when a given treatment is both more expensive and more effective. An alternative that has not been investigated in the oncology setting is the willingness-to-pay (WTP) method. In this pilot study, a WTP strategy was utilized to estimate the value that the Canadian tax-paying public puts on amifostine, a new cytoprotective agent that reduces the risk of chemotherapy-induced toxicity. The method of WTP was used within the framework of a classical cost-benefit analysis to estimate the net cost or benefit of prophylactic amifostine in patients with ovarian cancer who were receiving chemotherapy. This included direct costs for amifostine administration and hospital savings secondary to the reduced incidence of antineoplastic toxicity. A random sample of 50 Canadian tax-payers were interviewed to ascertain their maximum WTP for the new drug. The WTP survey instrument was simple to administer and easily understood by participants. Respondents stated that they would be willing to pay an average of $Can3,476 (95% confidence interval = $Can2,275 to $Can4,676) as an income tax increase to be paid over their lifetime for the value offered by the product. The benefit was then subtracted from the overall cost of amifostine ($Can3,826). This produced a net cost of $Can350 per patient (95% confidence interval = -$Can850 to $Can1,551), suggesting a situation of cost neutrality. WTP as a measure of value for oncology products is feasible and should be considered for future economic evaluations. The strategy is currently being used at this institution to determine the net societal cost or benefit of other cancer supportive care therapies, such as epoetin-alfa.

Applied Virtual Reality in Reusable Launch Vehicle Design, Operations Development, and Training

NASA Technical Reports Server (NTRS)

Hale, Joseph P.

1997-01-01

Application of Virtual Reality (VR) technology offers much promise to enhance and accelerate the development of Reusable Launch Vehicle (RLV) infrastructure and operations while simultaneously reducing developmental and operational costs. One of the primary cost areas in the RLV concept that is receiving special attention is maintenance and refurbishment operations. To produce and operate a cost effective RLV, turnaround cost must be minimized. Designing for maintainability is a necessary requirement in developing RLVs. VR can provide cost effective methods to design and evaluate components and systems for maintenance and refurbishment operations. The National Aeronautics and Space Administration (NASA)/Marshall Space Flight Center (MSFC) is beginning to utilize VR for design, operations development, and design analysis for RLVs. A VR applications program has been under development at NASA/MSFC since 1989. The objectives of the MSFC VR Applications Program are to develop, assess, validate, and utilize VR in hardware development, operations development and support, mission operations training and science training. The NASA/MSFC VR capability has also been utilized in several applications. These include: 1) the assessment of the design of the late Space Station Freedom Payload Control Area (PCA), the control room from which onboard payload operations are managed; 2) a viewing analysis of the Tethered Satellite System's (TSS) "end-of-reel" tether marking options; 3) development of a virtual mockup of the International Space Welding Experiment for science viewing analyses from the Shuttle Remote Manipulator System elbow camera and as a trainer for ground controllers; and 4) teleoperations using VR. This presentation will give a general overview of the MSFC VR Applications Program and describe the use of VR in design analyses, operations development, and training for RLVs.

The effects of medical group practice and physician payment methods on costs of care.

PubMed Central

Kralewski, J E; Rich, E C; Feldman, R; Dowd, B E; Bernhardt, T; Johnson, C; Gold, W

2000-01-01

OBJECTIVE: To assess the effects of payment methods on the costs of care in medical group practices. DATA SOURCES: Eighty-six clinics providing services for a Blue Cross managed care program during 1995. The clinics were analyzed to determine the relationship between payment methods and cost of care. Cost and patient data were obtained from Blue Cross records, and medical group practice clinic data were obtained by a survey of those organizations. STUDY DESIGN: The effects of clinic and physician payment methods on per member per year (PMPY) adjusted patient costs are evaluated using a two-stage regression model. Patient costs are adjusted for differences in payment schedules; patient age, gender, and ACG; clinic organizational variables are included as explanatory variables. DATA COLLECTION: Patient cost data were extracted from Blue Cross claims files, and patient and physician data from their enrollee and provider data banks. Medical group practice data were obtained by a mailed survey with telephone follow-up. PRINCIPAL FINDINGS: Capitation payment is correlated with lower patient care costs. When combined with fee-for-service with withhold provisions, this effect is smaller indicating that these two clinic payment methods are not interchangeable. Clinics with more physician compensation based on measures of resource use or based on some share of the net revenue of the clinic have lower patient care costs than those with more compensation related to productivity or based on salary. Salary compensation is strongly associated with higher costs. The use of physician profiles and clinical guidelines is associated with lower costs, but referral management systems have no such effect. The lower cost clinics are the smaller, multispecialty clinics. CONCLUSIONS: This study indicates that payment methods at both the medical group practice and physician levels influence the cost of care. However, the methods by which that influence is manifest is not clear. Although the organizational structure of clinics and their use of managed care programs appear to play a role, this influence is less than expected. PMID:10966087

Development of cost-effective surfactant flooding technology. Annual report for the period, September 30, 1993--September 29, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, G.; Sepehrnoori, K.

1995-08-01

This research consists of the parallel development of a new chemical flooding simulator and the application of our existing UTCHEM simulation code to model surfactant flooding. The new code is based upon a completely new numerical method that combines for the first time higher-order finite-difference methods, flux limiters, and implicit algorithms. Results indicate that this approach has significant advantages in some problems and will likely enable us to simulate much larger and more realistic chemical floods once it is fully developed. Additional improvements have also been made to the UTCHEM code, and it has been applied to the study ofmore » stochastic reservoirs with and without horizontal wells to evaluate methods to reduce the cost and risk of surfactant flooding. During the second year of this contract, we have already made significant progress on both of these tasks and are ahead of schedule on both of them.« less

Bio-inspired silicon nanospikes fabricated by metal-assisted chemical etching for antibacterial surfaces

NASA Astrophysics Data System (ADS)

Hu, Huan; Siu, Vince S.; Gifford, Stacey M.; Kim, Sungcheol; Lu, Minhua; Meyer, Pablo; Stolovitzky, Gustavo A.

2017-12-01

The recently discovered bactericidal properties of nanostructures on wings of insects such as cicadas and dragonflies have inspired the development of similar nanostructured surfaces for antibacterial applications. Since most antibacterial applications require nanostructures covering a considerable amount of area, a practical fabrication method needs to be cost-effective and scalable. However, most reported nanofabrication methods require either expensive equipment or a high temperature process, limiting cost efficiency and scalability. Here, we report a simple, fast, low-cost, and scalable antibacterial surface nanofabrication methodology. Our method is based on metal-assisted chemical etching that only requires etching a single crystal silicon substrate in a mixture of silver nitrate and hydrofluoric acid for several minutes. We experimentally studied the effects of etching time on the morphology of the silicon nanospikes and the bactericidal properties of the resulting surface. We discovered that 6 minutes of etching results in a surface containing silicon nanospikes with optimal geometry. The bactericidal properties of the silicon nanospikes were supported by bacterial plating results, fluorescence images, and scanning electron microscopy images.

Demonstrating the cost effectiveness of an expert occupational and environmental health nurse: application of AAOHN's success tools. American Association of Occupational Health Nurses.

PubMed

Morris, J A; Smith, P S

2001-12-01

According to DiBenedetto, "Occupational health nurses enhance and maximize the health, safety, and productivity of the domestic and global work force" (1999b). This project clearly defined the multiple roles and activities provided by an occupational and environmental health nurse and assistant, supported by a part time contract occupational health nurse. A well defined estimate of the personnel costs for each of these roles is helpful both in demonstrating current value and in future strategic planning for this department. The model highlighted both successes and a business cost savings opportunity for integrated disability management. The AAOHN's Success Tools (1998) were invaluable in launching the development of this cost effectiveness model. The three methods were selected from several tools of varying complexities offered. Collecting available data to develop these metrics required internal consultation with finance, human resources, and risk management, as well as communication with external health, safety, and environmental providers in the community. Benchmarks, surveys, and performance indicators can be found readily in the literature and online. The primary motivation for occupational and environmental health nurses to develop cost effectiveness analyses is to demonstrate the value and worth of their programs and services. However, it can be equally important to identify which services are not cost effective so knowledge and skills may be used in ways that continue to provide value to employers (AAOHN, 1996). As evidence based health care challenges the occupational health community to demonstrate business rationale and financial return on investment, occupational and environmental health nurses must meet that challenge if they are to define their preferred future (DiBenedetto, 2000).

Assessing the potential effects and cost-effectiveness of programmatic herpes zoster vaccination of elderly in the Netherlands

PubMed Central

2010-01-01

Background Herpes zoster (HZ) is a painful disease affecting a considerable part of the elderly. Programmatic HZ vaccination of elderly people may considerably reduce HZ morbidity and its related costs, but the extent of these effects is unknown. In this article, the potential effects and cost-effectiveness of programmatic HZ vaccination of elderly in the Netherlands have been assessed according to a framework that was developed to support evidence-based decision making regarding inclusion of new vaccines in the Dutch National Immunization Program. Methods An analytical framework was used combining a checklist, which structured relevant data on the vaccine, pathogen and disease, and a cost-effectiveness analysis. The cost-effectiveness analysis was performed from a societal perspective, using a Markov-cohort-model. Simultaneous vaccination with influenza was assumed. Results Due to the combination of waning immunity after vaccination and a reduced efficacy of vaccination at high ages, the most optimal cost-effectiveness ratio (€21716 per QALY) for HZ vaccination in the Netherlands was found for 70-year olds. This estimated ratio is just above the socially accepted threshold in the Netherlands of €20000 per QALY. If additional reduction of postherpetic neuralgia was included, the cost-effectiveness ratio improved (~€10000 per QALY) but uncertainty for this scenario is high. Conclusions Vaccination against HZ at the age of 70 years seems marginally cost-effective in the Netherlands. Due to limited vaccine efficacy a considerable part of the disease burden caused by HZ will remain, even with optimal acceptance of programmatic vaccination. PMID:20707884

Importance of Economic Evaluation in Health Care: An Indian Perspective.

PubMed

Dang, Amit; Likhar, Nishkarsh; Alok, Utkarsh

2016-05-01

Health economic studies provide information to decision makers for efficient use of available resources for maximizing health benefits. Economic evaluation is one part of health economics, and it is a tool for comparing costs and consequences of different interventions. Health technology assessment is a technique for economic evaluation that is well adapted by developed countries. The traditional classification of economic evaluation includes cost-minimization, cost-effectiveness analysis, cost-utility analysis, and cost-benefit analysis. There has been uncertainty in the conduct of such economic evaluations in India, due to some hesitancy with respect to the adoption of their guidelines. The biggest challenge in this evolutionary method is lack of understanding of methods in current use by all those involved in the provision and purchasing of health care. In some countries, different methods of economic evaluation have been adopted for decision making, most commonly to address the question of public subsidies for the purchase of medicines. There is limited evidence on the impact of health insurance on the health and economic well-being of beneficiaries in developing countries. India is currently pursuing several strategies to improve health services for its population, including investing in government-provided services as well as purchasing services from public and private providers through various schemes. Prospects for future growth and development in this field are required in India because rapid health care inflation, increasing rates of chronic conditions, aging population, and increasing technology diffusion will require greater economic efficiency into health care systems. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Emergent Challenges in Determining Costs for Economic Evaluations.

PubMed

Jacobs, Josephine C; Barnett, Paul G

2017-02-01

This paper describes methods of determining costs for economic evaluations of healthcare and considers how cost determination is being affected by recent developments in healthcare. The literature was reviewed to identify the strengths and weaknesses of the four principal methods of cost determination: micro-costing, activity-based costing, charge-based costing, and gross costing. A scoping review was conducted to identify key trends in healthcare delivery and to identify costing issues associated with these changes. Existing guidelines provide information on how to implement various costing methods. Bottom-up costing is needed when accuracy is paramount, but top-down approaches are often the only feasible approach. We describe six healthcare trends that have important implications for costing methodology: (1) reform in payment mechanisms; (2) care delivery in less restrictive settings; (3) the growth of telehealth interventions; (4) the proliferation of new technology; (5) patient privacy concerns; and (6) growing efforts to implement guidelines. Some costs are difficult to measure and have been overlooked. These include physician services for inpatients, facility costs for outpatient services, the cost of developing treatment innovations, patient and caregiver costs, and the indirect costs of organizational interventions. Standardized methods are needed to determine social welfare and productivity costs. In the future, cost determination will be facilitated by technological advances but hindered by the shift to capitated payment, to the provision of care in less restrictive settings, and by heightened concern for medical record privacy.

Screening for hypercholesterolaemia versus case finding for familial hypercholesterolaemia: a systematic review and cost-effectiveness analysis.

PubMed

Marks, D; Wonderling, D; Thorogood, M; Lambert, H; Humphries, S E; Neil, H A

2000-01-01

In the majority of people with familial hypercholesterolaemia (FH) the disorder is caused by a mutation of the low-density lipoprotein receptor gene that impairs its proper function, resulting in very high levels of plasma cholesterol. Such levels result in early and severe atherosclerosis, and hence substantial excess mortality from coronary heart disease. Most people with FH are undiagnosed or only diagnosed after their first coronary event, but early detection and treatment with hydroxymethylglutaryl-coenzyme (HMG CoA) reductase inhibitors (statins) can reduce morbidity and mortality. The prevalence of FH in the UK population is estimated to be 1 in 500, which means that approximately 110,000 people are affected. To evaluate whether screening for FH is appropriate. To determine which system of screening is most acceptable and cost-effective. To assess the deleterious psychosocial effects of genetic and clinical screening for an asymptomatic treatable inherited condition. To assess whether the risks of screening outweigh potential benefits. Relevant papers were identified through a search of the electronic databases. Additional papers referenced in the search material were identified and collected. Known researchers in the field were contacted and asked to supply information on unpublished or ongoing studies. INCLUSION/EXCLUSION CRITERIA: SCREENING AND TREATMENT: The review included studies of the mortality and morbidity associated with FH, the effectiveness and cost of treatment (ignoring pre-statin therapies in adults), and of the effectiveness or cost of possible screening strategies for FH. PSYCHOSOCIAL EFFECTS OF SCREENING: The search for papers on the psychological and social effects of screening for a treatable inherited condition was limited to the last 5 years because recent developments in genetic testing have changed the nature and implications of such screening tests. Papers focusing on genetic testing for FH and breast cancer were included. Papers relating to the risk of coronary heart disease with similarly modifiable outcome (non-FH) were also included. DATA EXTRACTION AND ASSESSMENT OF VALIDITY: A data assessment tool was designed to assess the quality and validity of the papers which reported primary data for the social and psychological effects of screening. Available guidelines for systematically reviewing papers concentrated on quantitative methods, and were of limited relevance. An algorithm was developed which could be used for both the qualitative and quantitative literature. MODELLING METHODS: A model was constructed to investigate the relative cost and effectiveness of various forms of population screening (universal or opportunistic) and case-finding screening (screening relatives of known FH cases). All strategies involved a two-stage process: first, identifying those people with cholesterol levels sufficiently elevated to be compatible with a diagnosis of FH, and then either making the diagnosis based on clinical signs and a family history of coronary disease or carrying out genetic tests. Cost-effectiveness has been measured in terms of incremental cost per year of life gained. MODELLING COST-EFFECTIVENESS: FH is a life-threatening condition with a long presymptomatic state. Diagnostic tests are reasonably reliable and acceptable, and treatment with statins substantially improves prognosis. Therefore, it is appropriate to consider systematic screening for this condition. Case finding amongst relatives of FH cases was the most cost-effective strategy, and universal systematic screening the least cost-effective. However, when targeted at young people (16 year olds) universal screening was also cost-effective. Screening patients admitted to hospital with premature myocardial infarction was also relatively cost-effective. Screening is least cost-effective in men aged over 35 years, because the gains in life expectancy are small. (ABSTRACT TRUNCA

Costing the distribution of insecticide-treated nets: a review of cost and cost-effectiveness studies to provide guidance on standardization of costing methodology

PubMed Central

Kolaczinski, Jan; Hanson, Kara

2006-01-01

Background Insecticide-treated nets (ITNs) are an effective and cost-effective means of malaria control. Scaling-up coverage of ITNs is challenging. It requires substantial resources and there are a number of strategies to choose from. Information on the cost of different strategies is still scarce. To guide the choice of a delivery strategy (or combination of strategies), reliable and standardized cost information for the different options is required. Methods The electronic online database PubMed was used for a systematic search of the published English literature on costing and economic evaluations of ITN distribution programmes. The keywords used were: net, bednet, insecticide, treated, ITN, cost, effectiveness, economic and evaluation. Identified papers were analysed to determine and evaluate the costing methods used. Methods were judged against existing standards of cost analysis to arrive at proposed standards for undertaking and presenting cost analyses. Results Cost estimates were often not readily comparable or could not be adjusted to a different context. This resulted from the wide range of methods applied and measures of output chosen. Most common shortcomings were the omission of certain costs and failure to adjust financial costs to generate economic costs. Generalisability was hampered by authors not reporting quantities and prices of resources separately and not examining the sensitivity of their results to variations in underlying assumptions. Conclusion The observed shortcomings have arisen despite the abundance of literature and guidelines on costing of health care interventions. This paper provides ITN specific recommendations in the hope that these will help to standardize future cost estimates. PMID:16681856

A Review of Microwave-Assisted Reactions for Biodiesel Production

PubMed Central

Nomanbhay, Saifuddin; Ong, Mei Yin

2017-01-01

The conversion of biomass into chemicals and biofuels is an active research area as trends move to replace fossil fuels with renewable resources due to society’s increased concern towards sustainability. In this context, microwave processing has emerged as a tool in organic synthesis and plays an important role in developing a more sustainable world. Integration of processing methods with microwave irradiation has resulted in a great reduction in the time required for many processes, while the reaction efficiencies have been increased markedly. Microwave processing produces a higher yield with a cleaner profile in comparison to other methods. The microwave processing is reported to be a better heating method than the conventional methods due to its unique thermal and non-thermal effects. This paper provides an insight into the theoretical aspects of microwave irradiation practices and highlights the importance of microwave processing. The potential of the microwave technology to accomplish superior outcomes over the conventional methods in biodiesel production is presented. A green process for biodiesel production using a non-catalytic method is still new and very costly because of the supercritical condition requirement. Hence, non-catalytic biodiesel conversion under ambient pressure using microwave technology must be developed, as the energy utilization for microwave-based biodiesel synthesis is reported to be lower and cost-effective. PMID:28952536

A Review of Microwave-Assisted Reactions for Biodiesel Production.

PubMed

Nomanbhay, Saifuddin; Ong, Mei Yin

2017-06-15

The conversion of biomass into chemicals and biofuels is an active research area as trends move to replace fossil fuels with renewable resources due to society's increased concern towards sustainability. In this context, microwave processing has emerged as a tool in organic synthesis and plays an important role in developing a more sustainable world. Integration of processing methods with microwave irradiation has resulted in a great reduction in the time required for many processes, while the reaction efficiencies have been increased markedly. Microwave processing produces a higher yield with a cleaner profile in comparison to other methods. The microwave processing is reported to be a better heating method than the conventional methods due to its unique thermal and non-thermal effects. This paper provides an insight into the theoretical aspects of microwave irradiation practices and highlights the importance of microwave processing. The potential of the microwave technology to accomplish superior outcomes over the conventional methods in biodiesel production is presented. A green process for biodiesel production using a non-catalytic method is still new and very costly because of the supercritical condition requirement. Hence, non-catalytic biodiesel conversion under ambient pressure using microwave technology must be developed, as the energy utilization for microwave-based biodiesel synthesis is reported to be lower and cost-effective.

Developing appropriate methods for cost-effectiveness analysis of cluster randomized trials.

PubMed

Gomes, Manuel; Ng, Edmond S-W; Grieve, Richard; Nixon, Richard; Carpenter, James; Thompson, Simon G

2012-01-01

Cost-effectiveness analyses (CEAs) may use data from cluster randomized trials (CRTs), where the unit of randomization is the cluster, not the individual. However, most studies use analytical methods that ignore clustering. This article compares alternative statistical methods for accommodating clustering in CEAs of CRTs. Our simulation study compared the performance of statistical methods for CEAs of CRTs with 2 treatment arms. The study considered a method that ignored clustering--seemingly unrelated regression (SUR) without a robust standard error (SE)--and 4 methods that recognized clustering--SUR and generalized estimating equations (GEEs), both with robust SE, a "2-stage" nonparametric bootstrap (TSB) with shrinkage correction, and a multilevel model (MLM). The base case assumed CRTs with moderate numbers of balanced clusters (20 per arm) and normally distributed costs. Other scenarios included CRTs with few clusters, imbalanced cluster sizes, and skewed costs. Performance was reported as bias, root mean squared error (rMSE), and confidence interval (CI) coverage for estimating incremental net benefits (INBs). We also compared the methods in a case study. Each method reported low levels of bias. Without the robust SE, SUR gave poor CI coverage (base case: 0.89 v. nominal level: 0.95). The MLM and TSB performed well in each scenario (CI coverage, 0.92-0.95). With few clusters, the GEE and SUR (with robust SE) had coverage below 0.90. In the case study, the mean INBs were similar across all methods, but ignoring clustering underestimated statistical uncertainty and the value of further research. MLMs and the TSB are appropriate analytical methods for CEAs of CRTs with the characteristics described. SUR and GEE are not recommended for studies with few clusters.

The cost-effectiveness of alectinib in anaplastic lymphoma kinase-positive (ALK+) advanced NSCLC previously treated with crizotinib.

PubMed

Carlson, J J; Canestaro, W; Ravelo, A; Wong, W

2017-07-01

Introduction Anaplastic lymphoma kinase (ALK) targeting drugs provide an important option for advanced non-small cell lung cancer patients with this distinct tumor type; however, there is considerable uncertainty as to which drug provides the optimal value after crizotinib treatment. This study estimated the cost-utility of alectinib vs ceritinib from a US payer perspective. Methods A cost-utility model was developed using partition survival methods and three health states: progression-free (PF), post-progression (PP), and death. Survival data were derived from the key clinical trials (alectinib: NP28761 & NP28673, ceritinib: ASCEND I and II). Costs included drugs, adverse events, and supportive care. Utilities were based on trial data and the literature. One-way and probabilistic sensitivity analyses (PSA) were performed to assess parameter uncertainty. Results Treatment with alectinib vs ceritinib resulted in increases of 2.55 months in the PF state, 0.44 quality adjusted life-years (QALYs), and $13,868, yielding a mean cost/QALY of $31,180. In the PSA, alectinib had a 96% probability of being cost-effective at a willingness-to-pay of $100,000/QALY. Drivers of model results were drug costs and utilities in the PF health state. The ICER ranged from $10,600-$65,000 per QALY in scenario analyses, including a sub-group analysis limited to patients with prior chemotherapy and crizotinib treatment. Conclusions Treatment with alectinib in ALK + crizotinib-treated patients increased time progression-free and QALYs vs ceritinib. The marginal cost increase was driven by longer treatment durations with alectinib. This model demonstrates that alectinib may be considered a cost-effective treatment after progression on crizotinib.

Development of an e-Learning Program for Extensive Reading

ERIC Educational Resources Information Center

Okazaki, Hironobu; Hashimoto, Shinichi; Fukuda, Eri; Nitta, Haruhiko; Kido, Kazuhiko

2012-01-01

As extensive reading becomes more commonplace in the EFL/ESL classroom, there is a rise in the number of instructors and administrators who are looking for cost-effective and space-saving methods to carry out extensive reading activities. Two extensive reading systems to respond to such concerns were developed with the support of a Grant-in-Aid…

Adverse Outcome Pathways and Systems Biology as Conceptual Approaches to Support Development of 21st Century Test Methods and Extrapolation Tools

EPA Science Inventory

The proposed paradigm for “Toxicity Testing in the 21st Century” supports the development of mechanistically-based, high-throughput in vitro assays as a potential cost effective and scientifically-sound alternative to some whole animal hazard testing. To accomplish this long-term...

A cost effective real-time PCR for the detection of adenovirus from viral swabs

PubMed Central

2013-01-01

Compared to traditional testing strategies, nucleic acid amplification tests such as real-time PCR offer many advantages for the detection of human adenoviruses. However, commercial assays are expensive and cost prohibitive for many clinical laboratories. To overcome fiscal challenges, a cost effective strategy was developed using a combination of homogenization and heat treatment with an “in-house” real-time PCR. In 196 swabs submitted for adenovirus detection, this crude extraction method showed performance characteristics equivalent to viral DNA obtained from a commercial nucleic acid extraction. In addition, the in-house real-time PCR outperformed traditional testing strategies using virus culture, with sensitivities of 100% and 69.2%, respectively. Overall, the combination of homogenization and heat treatment with a sensitive in-house real-time PCR provides accurate results at a cost comparable to viral culture. PMID:23758993

The cost diary: a method to measure direct and indirect costs in cost-effectiveness research.

PubMed

Goossens, M E; Rutten-van Mölken, M P; Vlaeyen, J W; van der Linden, S M

2000-07-01

From a societal perspective long-term clinical trials or follow-up studies should preferably not only include an evaluation of the health effect for the patient, but also an economic evaluation. In order to yield comprehensive medical and nonmedical resource use data, we at least partly depend on respondents' recall for collecting these costing data. A patient cost diary was developed in order to estimate total resource use, expenses, and lost production due to illness and treatment. We applied the cost diary in two randomized clinical trials evaluating the cost-effectiveness of behavioral rehabilitation in 205 fibromyalgia and chronic low back pain patients. The use of the diary was evaluated, studying the feasibility, the influence of the period of data collection on the results, and some aspects of validity. Eighty-five percent of the patients completed at least one diary and in total 68% of the diaries were returned. Although the results for the three alternative periods of data collection (keeping the diary 1 week every month, 2 weeks every 2 months, or a full year) were not significantly different, they were only moderately correlated. Finally, self-reported specialist care contacts were generally in agreement with data from an insurance company. However, for physiotherapy contacts there were differences between the self-reported and insurance data. This study shows how the cost diary might be used successfully in cost-effectiveness studies.

Cost-effectiveness analyses of hepatitis A vaccine: a systematic review to explore the effect of methodological quality on the economic attractiveness of vaccination strategies.

PubMed

Anonychuk, Andrea M; Tricco, Andrea C; Bauch, Chris T; Pham, Ba'; Gilca, Vladimir; Duval, Bernard; John-Baptiste, Ava; Woo, Gloria; Krahn, Murray

2008-01-01

Hepatitis A vaccines have been available for more than a decade. Because the burden of hepatitis A virus has fallen in developed countries, the appropriate role of vaccination programmes, especially universal vaccination strategies, remains unclear. Cost-effectiveness analysis is a useful method of relating the costs of vaccination to its benefits, and may inform policy. This article systematically reviews the evidence on the cost effectiveness of hepatitis A vaccination in varying populations, and explores the effects of methodological quality and key modelling issues on the cost-effectiveness ratios.Cost-effectiveness/cost-utility studies of hepatitis A vaccine were identified via a series of literature searches (MEDLINE, EMBASE, HSTAR and SSCI). Citations and full-text articles were reviewed independently by two reviewers. Reference searching, author searches and expert consultation ensured literature saturation. Incremental cost-effectiveness ratios (ICERs) were abstracted for base-case analyses, converted to $US, year 2005 values, and categorised to reflect various levels of cost effectiveness. Quality of reporting, methodological issues and key modelling issues were assessed using frameworks published in the literature.Thirty-one cost-effectiveness studies (including 12 cost-utility analyses) were included from full-text article review (n = 58) and citation screening (n = 570). These studies evaluated universal mass vaccination (n = 14), targeted vaccination (n = 17) and vaccination of susceptibles (i.e. individuals initially screened for antibody and, if susceptible, vaccinated) [n = 13]. For universal vaccination, 50% of the ICERs were <$US20 000 per QALY or life-year gained. Analyses evaluating vaccination in children, particularly in high incidence areas, produced the most attractive ICERs. For targeted vaccination, cost effectiveness was highly dependent on the risk of infection.Incidence, vaccine cost and discount rate were the most influential parameters in sensitivity analyses. Overall, analyses that evaluated the combined hepatitis A/hepatitis B vaccine, adjusted incidence for under-reporting, included societal costs and that came from studies of higher methodological quality tended to have more attractive cost-effectiveness ratios. Methodological quality varied across studies. Major methodological flaws included inappropriate model type, comparator, incidence estimate and inclusion/exclusion of costs.

Costing evidence for health care decision-making in Austria: A systematic review.

PubMed

Mayer, Susanne; Kiss, Noemi; Łaszewska, Agata; Simon, Judit

2017-01-01

With rising healthcare costs comes an increasing demand for evidence-informed resource allocation using economic evaluations worldwide. Furthermore, standardization of costing and reporting methods both at international and national levels are imperative to make economic evaluations a valid tool for decision-making. The aim of this review is to assess the availability and consistency of costing evidence that could be used for decision-making in Austria. It describes systematically the current economic evaluation and costing studies landscape focusing on the applied costing methods and their reporting standards. Findings are discussed in terms of their likely impacts on evidence-based decision-making and potential suggestions for areas of development. A systematic literature review of English and German language peer-reviewed as well as grey literature (2004-2015) was conducted to identify Austrian economic analyses. The databases MEDLINE, EMBASE, SSCI, EconLit, NHS EED and Scopus were searched. Publication and study characteristics, costing methods, reporting standards and valuation sources were systematically synthesised and assessed. A total of 93 studies were included. 87% were journal articles, 13% were reports. 41% of all studies were full economic evaluations, mostly cost-effectiveness analyses. Based on relevant standards the most commonly observed limitations were that 60% of the studies did not clearly state an analytical perspective, 25% of the studies did not provide the year of costing, 27% did not comprehensively list all valuation sources, and 38% did not report all applied unit costs. There are substantial inconsistencies in the costing methods and reporting standards in economic analyses in Austria, which may contribute to a low acceptance and lack of interest in economic evaluation-informed decision making. To improve comparability and quality of future studies, national costing guidelines should be updated with more specific methodological guidance and a national reference cost library should be set up to allow harmonisation of valuation methods.

Something old, something new, something borrowed, something blue: a framework for the marriage of health econometrics and cost-effectiveness analysis.

PubMed

Hoch, Jeffrey S; Briggs, Andrew H; Willan, Andrew R

2002-07-01

Economic evaluation is often seen as a branch of health economics divorced from mainstream econometric techniques. Instead, it is perceived as relying on statistical methods for clinical trials. Furthermore, the statistic of interest in cost-effectiveness analysis, the incremental cost-effectiveness ratio is not amenable to regression-based methods, hence the traditional reliance on comparing aggregate measures across the arms of a clinical trial. In this paper, we explore the potential for health economists undertaking cost-effectiveness analysis to exploit the plethora of established econometric techniques through the use of the net-benefit framework - a recently suggested reformulation of the cost-effectiveness problem that avoids the reliance on cost-effectiveness ratios and their associated statistical problems. This allows the formulation of the cost-effectiveness problem within a standard regression type framework. We provide an example with empirical data to illustrate how a regression type framework can enhance the net-benefit method. We go on to suggest that practical advantages of the net-benefit regression approach include being able to use established econometric techniques, adjust for imperfect randomisation, and identify important subgroups in order to estimate the marginal cost-effectiveness of an intervention. Copyright 2002 John Wiley & Sons, Ltd.

Cost Savings From the Provision of Specific Methods of Contraception in a Publicly Funded Program

PubMed Central

Rostovtseva, Daria P.; Brindis, Claire D.; Biggs, M. Antonia; Hulett, Denis; Darney, Philip D.

2009-01-01

Objectives. We examined the cost-effectiveness of contraceptive methods dispensed in 2003 to 955 000 women in Family PACT (Planning, Access, Care and Treatment), California's publicly funded family planning program. Methods. We estimated the number of pregnancies averted by each contraceptive method and compared the cost of providing each method with the savings from averted pregnancies. Results. More than half of the 178 000 averted pregnancies were attributable to oral contraceptives, one fifth to injectable methods, and one tenth each to the patch and barrier methods. The implant and intrauterine contraceptives were the most cost-effective, with cost savings of more than $7.00 for every $1.00 spent in services and supplies. Per $1.00 spent, injectable contraceptives yielded savings of $5.60; oral contraceptives, $4.07; the patch, $2.99; the vaginal ring, $2.55; barrier methods, $1.34; and emergency contraceptives, $1.43. Conclusions. All contraceptive methods were cost-effective—they saved more in public expenditures for unintended pregnancies than they cost to provide. Because no single method is clinically recommended to every woman, it is medically and fiscally advisable for public health programs to offer all contraceptive methods. PMID:18703437

The cost of wound debridement: a Canadian perspective.

PubMed

Woo, Kevin Y; Keast, David; Parsons, Nancy; Sibbald, R Gary; Mittmann, Nicole

2015-08-01

Debridement is integral to wound bed preparation by removing devitalised tissue, foreign material, senescent cells, phenotypically abnormal/dysfunctional cells (cellular burden) and bacteria sequestrum (biofilm). While the body of evidence to substantiate the benefits of debridement is growing, little is known about the cost-effectiveness of each debridement method. The purpose of this analysis was to compare cost-effectiveness of various debridement methods and clinical outcomes to help inform clinicians and policy makers of the cost-effectiveness associated with the various types of therapies and the impact they can have on the Canadian health care system. Results indicated that sharp debridement was the most cost-effective followed by enzymatic debridement method. © 2013 The Authors. International Wound Journal © 2013 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Analysis and Evaluation of Processes and Equipment in Tasks 2 and 4 of the Low-cost Solar Array Project

NASA Technical Reports Server (NTRS)

Wolf, M.

1979-01-01

To facilitate the task of objectively comparing competing process options, a methodology was needed for the quantitative evaluation of their relative cost effectiveness. Such a methodology was developed and is described, together with three examples for its application. The criterion for the evaluation is the cost of the energy produced by the system. The method permits the evaluation of competing design options for subsystems, based on the differences in cost and efficiency of the subsystems, assuming comparable reliability and service life, or of competing manufacturing process options for such subsystems, which include solar cells or modules. This process option analysis is based on differences in cost, yield, and conversion efficiency contribution of the process steps considered.

Vadose Zone Transport Field Study: Detailed Test Plan for Simulated Leak Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, Anderson L.; Gee, Glendon W.

2000-06-23

This report describes controlled transport experiments at well-instrumented field tests to be conducted during FY 2000 in support of DOE?s Vadose Zone Transport Field Study (VZTFS). The VZTFS supports the Groundwater/Vadose Zone Integration Project Science and Technology Initiative. The field tests will improve understanding of field-scale transport and lead to the development or identification of efficient and cost-effective characterization methods. These methods will capture the extent of contaminant plumes using existing steel-cased boreholes. Specific objectives are to 1) identify mechanisms controlling transport processes in soils typical of the hydrogeologic conditions of Hanford?s waste disposal sites; 2) reduce uncertainty in conceptualmore » models; 3) develop a detailed and accurate data base of hydraulic and transport parameters for validation of three-dimensional numerical models; and 4) identify and evaluate advanced, cost-effective characterization methods with the potential to assess changing conditions in the vadose zone, particularly as surrogates of currently undetectable high-risk contaminants. Pacific Northwest National Laboratory (PNNL) manages the VZTFS for DOE.« less

Cost-effectiveness of a transitional pharmaceutical care program for patients discharged from the hospital

PubMed Central

van der Knaap, Ronald; Bouhannouch, Fatiha; Borgsteede, Sander D.; Janssen, Marjo J. A.; Siegert, Carl E. H.; Egberts, Toine C. G.; van den Bemt, Patricia M. L. A.; van Wier, Marieke F.; Bosmans, Judith E.

2017-01-01

Background To improve continuity of care at hospital admission and discharge and to decrease medication errors pharmaceutical care programs are developed. This study aims to determine the cost-effectiveness of the COACH program in comparison with usual care from a societal perspective. Methods A controlled clinical trial was performed at the Internal Medicine department of a general teaching hospital. All admitted patients using at least one prescription drug were included. The COACH program consisted of medication reconciliation, patient counselling at discharge, and communication to healthcare providers in primary care. The primary outcome was the proportion of patients with an unplanned rehospitalisation within three months after discharge. Also, the number of quality-adjusted life-years (QALYs) was assessed. Cost data were collected using cost diaries. Uncertainty surrounding cost differences and incremental cost-effectiveness ratios between the groups was estimated by bootstrapping. Results In the COACH program, 168 patients were included and in usual care 151 patients. There was no significant difference in the proportion of patients with unplanned rehospitalisations (mean difference 0.17%, 95% CI -8.85;8.51), and in QALYs (mean difference -0.0085, 95% CI -0.0170;0.0001). Total costs for the COACH program were non-significantly lower than usual care (-€1160, 95% CI -3168;847). Cost-effectiveness planes showed that the program was not cost-effective compared with usual care for unplanned rehospitalisations and QALYs gained. Conclusion The COACH program was not cost-effective in comparison with usual care. Future studies should focus on high risk patients and include other outcomes (e.g. adverse drug events) as this may increase the chances of a cost-effective intervention. Dutch trial register NTR1519 PMID:28445474

First- and Second-Line Bevacizumab in Addition to Chemotherapy for Metastatic Colorectal Cancer: A United States–Based Cost-Effectiveness Analysis

PubMed Central

Goldstein, Daniel A.; Chen, Qiushi; Ayer, Turgay; Howard, David H.; Lipscomb, Joseph; El-Rayes, Bassel F.; Flowers, Christopher R.

2015-01-01

Purpose The addition of bevacizumab to fluorouracil-based chemotherapy is a standard of care for previously untreated metastatic colorectal cancer. Continuation of bevacizumab beyond progression is an accepted standard of care based on a 1.4-month increase in median overall survival observed in a randomized trial. No United States–based cost-effectiveness modeling analyses are currently available addressing the use of bevacizumab in metastatic colorectal cancer. Our objective was to determine the cost effectiveness of bevacizumab in the first-line setting and when continued beyond progression from the perspective of US payers. Methods We developed two Markov models to compare the cost and effectiveness of fluorouracil, leucovorin, and oxaliplatin with or without bevacizumab in the first-line treatment and subsequent fluorouracil, leucovorin, and irinotecan with or without bevacizumab in the second-line treatment of metastatic colorectal cancer. Model robustness was addressed by univariable and probabilistic sensitivity analyses. Health outcomes were measured in life-years and quality-adjusted life-years (QALYs). Results Using bevacizumab in first-line therapy provided an additional 0.10 QALYs (0.14 life-years) at a cost of $59,361. The incremental cost-effectiveness ratio was $571,240 per QALY. Continuing bevacizumab beyond progression provided an additional 0.11 QALYs (0.16 life-years) at a cost of $39,209. The incremental cost-effectiveness ratio was $364,083 per QALY. In univariable sensitivity analyses, the variables with the greatest influence on the incremental cost-effectiveness ratio were bevacizumab cost, overall survival, and utility. Conclusion Bevacizumab provides minimal incremental benefit at high incremental cost per QALY in both the first- and second-line settings of metastatic colorectal cancer treatment. PMID:25691669

PROOF OF CONCEPT FOR A HUMAN RELIABILITY ANALYSIS METHOD FOR HEURISTIC USABILITY EVALUATION OF SOFTWARE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring; David I. Gertman; Jeffrey C. Joe

2005-09-01

An ongoing issue within human-computer interaction (HCI) is the need for simplified or “discount” methods. The current economic slowdown has necessitated innovative methods that are results driven and cost effective. The myriad methods of design and usability are currently being cost-justified, and new techniques are actively being explored that meet current budgets and needs. Recent efforts in human reliability analysis (HRA) are highlighted by the ten-year development of the Standardized Plant Analysis Risk HRA (SPAR-H) method. The SPAR-H method has been used primarily for determining humancentered risk at nuclear power plants. The SPAR-H method, however, shares task analysis underpinnings withmore » HCI. Despite this methodological overlap, there is currently no HRA approach deployed in heuristic usability evaluation. This paper presents an extension of the existing SPAR-H method to be used as part of heuristic usability evaluation in HCI.« less

Economic Evaluation of First-Line Treatments for Metastatic Renal Cell Carcinoma: A Cost-Effectiveness Analysis in A Health Resource–Limited Setting

PubMed Central

Wu, Bin; Dong, Baijun; Xu, Yuejuan; Zhang, Qiang; Shen, Jinfang; Chen, Huafeng; Xue, Wei

2012-01-01

Background To estimate, from the perspective of the Chinese healthcare system, the economic outcomes of five different first-line strategies among patients with metastatic renal cell carcinoma (mRCC). Methods and Findings A decision-analytic model was developed to simulate the lifetime disease course associated with renal cell carcinoma. The health and economic outcomes of five first-line strategies (interferon-alfa, interleukin-2, interleukin-2 plus interferon-alfa, sunitinib and bevacizumab plus interferon-alfa) were estimated and assessed by indirect comparison. The clinical and utility data were taken from published studies. The cost data were estimated from local charge data and current Chinese practices. Sensitivity analyses were used to explore the impact of uncertainty regarding the results. The impact of the sunitinib patient assistant program (SPAP) was evaluated via scenario analysis. The base-case analysis showed that the sunitinib strategy yielded the maximum health benefits: 2.71 life years and 1.40 quality-adjusted life-years (QALY). The marginal cost-effectiveness (cost per additional QALY) gained via the sunitinib strategy compared with the conventional strategy was $220,384 (without SPAP, interleukin-2 plus interferon-alfa and bevacizumab plus interferon-alfa were dominated) and $16,993 (with SPAP, interferon-alfa, interleukin-2 plus interferon-alfa and bevacizumab plus interferon-alfa were dominated). In general, the results were sensitive to the hazard ratio of progression-free survival. The probabilistic sensitivity analysis demonstrated that the sunitinib strategy with SPAP was the most cost-effective approach when the willingness-to-pay threshold was over $16,000. Conclusions Our analysis suggests that traditional cytokine therapy is the cost-effective option in the Chinese healthcare setting. In some relatively developed regions, sunitinib with SPAP may be a favorable cost-effective alternative for mRCC. PMID:22412884

Cost-Effectiveness of First-Line Sevelamer and Lanthanum versus Calcium-Based Binders for Hyperphosphatemia of Chronic Kidney Disease.

PubMed

Habbous, Steven; Przech, Sebastian; Martin, Janet; Garg, Amit X; Sarma, Sisira

2018-03-01

Phosphate binders are used to treat hyperphosphatemia among patients with chronic kidney disease (CKD). To conduct an economic evaluation comparing calcium-free binders sevelamer and lanthanum with calcium-based binders for patients with CKD. Effectiveness data were obtained from a recent meta-analysis of randomized trials. Effectiveness was measured as life-years gained and translated to quality-adjusted life-years (QALYs) using utility weights from the literature. A Markov model consisting of non-dialysis-dependent (NDD)-CKD, dialysis-dependent (DD)-CKD, and death was developed to estimate the incremental costs and effects of sevelamer and lanthanum versus those of calcium-based binders. A lifetime horizon was used and both costs and effects were discounted at 1.5%. All costs are presented in 2015 Canadian dollars from the Canadian public payer perspective. Results of probabilistic sensitivity analysis were presented using cost-effectiveness acceptability curves. Sensitivity analyses were conducted for risk pooling methods, omission of dialysis costs, and persistence of drug effects on mortality. Sevelamer resulted in an incremental cost-effectiveness ratio of $106,522/QALY for NDD-CKD and $133,847/QALY for DD-CKD cohorts. Excluding dialysis costs, sevelamer was cost-effective in the NDD-CKD cohort ($5,847/QALY) and the DD-CKD cohort ($11,178/QALY). Lanthanum was dominated regardless of whether dialysis costs were included. Existing evidence does not clearly support the cost-effectiveness of non-calcium-containing phosphate binders (sevelamer and lanthanum) relative to calcium-containing phosphate binders in DD-CKD patients. Our study suggests that sevelamer may be cost-effective before dialysis onset. Because of the remaining uncertainty in several clinically relevant outcomes over time in DD-CKD and NDD-CKD patients, further research is encouraged. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Need for Cost Optimization of Space Life Support Systems

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Anderson, Grant

2017-01-01

As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

Definitions and methods of cost assessment: an intensivist's guide. ESICM section on health research and outcome working group on cost effectiveness.

PubMed

Jegers, M; Edbrooke, D L; Hibbert, C L; Chalfin, D B; Burchardi, H

2002-06-01

To define the different types of costs incurred in the care of critically ill patients and to describe some of the most commonly used methods for measuring and allocating these costs. Literature review. Definitions for opportunity, direct and indirect, fixed, variable, marginal, and total costs are described and interpreted in the context of the critical care setting. Two main methods of costing are described: the 'top-down' and 'bottom-up' methods together with a number of cost proxies, such as the use of weighted hospital days, diagnosis-related groups, severity and activity scores, and effective costs per survivor. The assessment and allocation of costs to critically ill patients is complex and as a result of the different definitions and methods used, meaningful comparisons between studies are plagued with difficulty. When undertaking a study looking to measure costs, it is important to state: (a) the aim of the cost assessment study; (b) the perspective (point of view); (c) the type of costs that need to be measured; and (d) the time span of assessment. By being explicit about the rationale of the study and the methods used, it is hoped that the results of economic evaluations will be better understood, and hence implemented within the critical care setting.

Regression analysis on the variation in efficiency frontiers for prevention stage of HIV/AIDS.

PubMed

Kamae, Maki S; Kamae, Isao; Cohen, Joshua T; Neumann, Peter J

2011-01-01

To investigate how the cost effectiveness of preventing HIV/AIDS varies across possible efficiency frontiers (EFs) by taking into account potentially relevant external factors, such as prevention stage, and how the EFs can be characterized using regression analysis given uncertainty of the QALY-cost estimates. We reviewed cost-effectiveness estimates for the prevention and treatment of HIV/AIDS published from 2002-2007 and catalogued in the Tufts Medical Center Cost-Effectiveness Analysis (CEA) Registry. We constructed efficiency frontier (EF) curves by plotting QALYs against costs, using methods used by the Institute for Quality and Efficiency in Health Care (IQWiG) in Germany. We stratified the QALY-cost ratios by prevention stage, country of study, and payer perspective, and estimated EF equations using log and square-root models. A total of 53 QALY-cost ratios were identified for HIV/AIDS in the Tufts CEA Registry. Plotted ratios stratified by prevention stage were visually grouped into a cluster consisting of primary/secondary prevention measures and a cluster consisting of tertiary measures. Correlation coefficients for each cluster were statistically significant. For each cluster, we derived two EF equations - one based on the log model, and one based on the square-root model. Our findings indicate that stratification of HIV/AIDS interventions by prevention stage can yield distinct EFs, and that the correlation and regression analyses are useful for parametrically characterizing EF equations. Our study has certain limitations, such as the small number of included articles and the potential for study populations to be non-representative of countries of interest. Nonetheless, our approach could help develop a deeper appreciation of cost effectiveness beyond the deterministic approach developed by IQWiG.

[The year 2000: one billion couples of child-bearing age].

PubMed

Lintong, L J

1988-04-01

Out of 1 billion couples there are only 124 million who use modern and effective contraceptives. World abortions number 33 million/year. 250 million sexually active women of child-bearing age in developing countries outside China do not use modern and effective contraceptives. Fertility control costs on the average US$2.5 billion a year in each developing country, 20% of which is assistance from developed countries. Expanding the family planning service to the 250 million sexually active child-bearing aged women costs an additional U.S. $5 billion yearly. A family planning accessibility survey was conducted by the Population Crisis Committee. PCC divided the countries into 2 categories: Developed and developing countries. The 110 countries (15 developed and 95 developing) covered 96% of the world population. The survey placed the countries in 5 classes according to accessibility levels: Excellent, good, fair, poor, very poor. The developed countries were analyzed according to effective contraceptive methods, service to the poor and minorities, sex education in the schools, and family planning information and advertisement. The developing countries were analyzed according to effective contraceptive methods, performance of service and distribution, public information and education, private sector participation, government finance and policies. Of the 15 developed countries, 43% were excellent, 22% good, 24% fair, and 2% poor. Of the 95 developing countries, 5 were excellent, 10 good, 16 fair, and 64 either poor or very poor countries in respect to family planning accessibility. In the face of a population explosion in the year 2000, many countries lack of government support for family planning programs. After 30 years of world effort in population control, half of the world population still has no effective family planning services.

An Economic Evaluation of Colorectal Cancer Screening in Primary Care Practice

PubMed Central

Meenan, Richard T.; Anderson, Melissa L.; Chubak, Jessica; Vernon, Sally W.; Fuller, Sharon; Wang, Ching-Yun; Green, Beverly B.

2015-01-01

Introduction Recent colorectal cancer screening studies focus on optimizing adherence. This study evaluated the cost effectiveness of interventions using electronic health records (EHRs), automated mailings, and stepped support increases to improve 2-year colorectal cancer screening adherence. Methods Analyses were based on a parallel-design, randomized trial in which three stepped interventions (EHR-linked mailings [“automated”], automated plus telephone assistance [“assisted”], or automated and assisted plus nurse navigation to testing completion or refusal [navigated”]) were compared to usual care. Data were from August 2008–November 2011 with analyses performed during 2012–2013. Implementation resources were micro-costed; research and registry development costs were excluded. Incremental cost-effectiveness ratios (ICERs) were based on number of participants current for screening per guidelines over 2 years. Bootstrapping examined robustness of results. Results Intervention delivery cost per participant current for screening ranged from $21 (automated) to $27 (navigated). Inclusion of induced testing costs (e.g., screening colonoscopy) lowered expenditures for automated (ICER=−$159) and assisted (ICER=−$36) relative to usual care over 2 years. Savings arose from increased fecal occult blood testing, substituting for more expensive colonoscopies in usual care. Results were broadly consistent across demographic subgroups. More intensive interventions were consistently likely to be cost effective relative to less intensive interventions, with willingness to pay values of $600–$1,200 for an additional person current for screening yielding ≥80% probability of cost effectiveness. Conclusions Two-year cost effectiveness of a stepped approach to colorectal cancer screening promotion based on EHR data is indicated, but longer-term cost effectiveness requires further study. PMID:25998922

Comparison and feasibility of North American methods for harvesting small trees and residues for energy

Treesearch

Bruce R. Hartsough; Bryce J. Stokes

1990-01-01

A database of North American harvesting systems was developed. Parameters for each system included site, material and product characteristics, equipment mix and production rate. Onto-truck and delivered costs per green tonne, and breakeven oil prices were developed using standard costing methods. Systems costs were compared over the ranges of piece size, volume per...

Impact of vaccine herd-protection effects in cost-effectiveness analyses of childhood vaccinations. A quantitative comparative analysis

PubMed Central

Maldonado, Yvonne; Ioannidis, John P. A.; Contopoulos-Ioannidis, Despina

2017-01-01

Background Inclusion of vaccine herd-protection effects in cost-effectiveness analyses (CEAs) can impact the CEAs-conclusions. However, empirical epidemiologic data on the size of herd-protection effects from original studies are limited. Methods We performed a quantitative comparative analysis of the impact of herd-protection effects in CEAs for four childhood vaccinations (pneumococcal, meningococcal, rotavirus and influenza). We considered CEAs reporting incremental-cost-effectiveness-ratios (ICERs) (per quality-adjusted-life-years [QALY] gained; per life-years [LY] gained or per disability-adjusted-life-years [DALY] avoided), both with and without herd protection, while keeping all other model parameters stable. We calculated the size of the ICER-differences without vs with-herd-protection and estimated how often inclusion of herd-protection led to crossing of the cost-effectiveness threshold (of an assumed societal-willingness-to-pay) of $50,000 for more-developed countries or X3GDP/capita (WHO-threshold) for less-developed countries. Results We identified 35 CEA studies (20 pneumococcal, 4 meningococcal, 8 rotavirus and 3 influenza vaccines) with 99 ICER-analyses (55 per-QALY, 27 per-LY and 17 per-DALY). The median ICER-absolute differences per QALY, LY and DALY (without minus with herd-protection) were $15,620 (IQR: $877 to $48,376); $54,871 (IQR: $787 to $115,026) and $49 (IQR: $15 to $1,636) respectively. When the target-vaccination strategy was not cost-saving without herd-protection, inclusion of herd-protection always resulted in more favorable results. In CEAs that had ICERs above the cost-effectiveness threshold without herd-protection, inclusion of herd-protection led to crossing of that threshold in 45% of the cases. This impacted only CEAs for more developed countries, as all but one CEAs for less developed countries had ICERs below the WHO-cost-effectiveness threshold even without herd-protection. In several analyses, recommendation for the adoption of the target vaccination strategy depended on the inclusion of the herd protection effect. Conclusions Inclusion of herd-protection effects in CEAs had a substantial impact in the estimated ICERs and made target-vaccination strategies more attractive options in almost half of the cases where ICERs were above the societal-willingness to pay threshold without herd-protection. More empirical epidemiologic data are needed to determine the size of herd-protection effects across diverse settings and also the size of negative vaccine effects, e.g. from serotype substitution. PMID:28249046

Fragment-Based Drug Discovery in Academia: Experiences From a Tuberculosis Programme

NASA Astrophysics Data System (ADS)

Heikkila, Timo J.; Surade, Sachin; Silvestre, Hernani L.; Dias, Marcio V. B.; Ciulli, Alessio; Bromfield, Karen; Scott, Duncan; Howard, Nigel; Wen, Shijun; Wei, Alvin Hung; Osborne, David; Abell, Chris; Blundell, Tom L.

The problems associated with neglected diseases are often compounded by increasing incidence of antibiotic resistance. Patient negligence and abuse of antibiotics has lead to explosive growth in cases of tuberculosis, with some M. tuberculosis strains becoming virtually untreatable. Structure-based drug development is viewed as cost-effective and time-consuming method for discovery and development of hits to lead compounds. In this review we will discuss the suitability of fragment-based methods for developing new chemotherapeutics against neglected diseases, providing examples from our tuberculosis programme.

Recent advances in conventional and contemporary methods for remediation of heavy metal-contaminated soils.

PubMed

Sharma, Swati; Tiwari, Sakshi; Hasan, Abshar; Saxena, Varun; Pandey, Lalit M

2018-04-01

Remediation of heavy metal-contaminated soils has been drawing our attention toward it for quite some time now and a need for developing new methods toward reclamation has come up as the need of the hour. Conventional methods of heavy metal-contaminated soil remediation have been in use for decades and have shown great results, but they have their own setbacks. The chemical and physical techniques when used singularly generally generate by-products (toxic sludge or pollutants) and are not cost-effective, while the biological process is very slow and time-consuming. Hence to overcome them, an amalgamation of two or more techniques is being used. In view of the facts, new methods of biosorption, nanoremediation as well as microbial fuel cell techniques have been developed, which utilize the metabolic activities of microorganisms for bioremediation purpose. These are cost-effective and efficient methods of remediation, which are now becoming an integral part of all environmental and bioresource technology. In this contribution, we have highlighted various augmentations in physical, chemical, and biological methods for the remediation of heavy metal-contaminated soils, weighing up their pros and cons. Further, we have discussed the amalgamation of the above techniques such as physiochemical and physiobiological methods with recent literature for the removal of heavy metals from the contaminated soils. These combinations have showed synergetic effects with a many fold increase in removal efficiency of heavy metals along with economic feasibility.

Evidence for cost-effectiveness of lifestyle primary preventions for cardiovascular disease in the Asia-Pacific Region: a systematic review.

PubMed

Sutton, Lainie; Karan, Anup; Mahal, Ajay

2014-11-19

Countries of the Asia Pacific region account for a major share of the global burden of disease due to cardiovascular disease (CVD) and this burden is rising over time. Modifiable behavioural risk factors for CVD are considered a key target for reduction in incidence but their effectiveness and cost-effectiveness tend to depend on country context. However, no systematic assessment of cost-effectiveness of interventions addressing behavioural risk factors in the region exists. A systematic review of the published literature on cost-effectiveness of interventions targeting modifiable behavioural risk factors for CVD was undertaken. Inclusion criteria were (a) countries in Asia and the Pacific, (b) studies that had conducted economic evaluations of interventions (c) published papers in major economic and public health databases and (d) a comprehensive list of search words to identify appropriate articles. All authors independently examined the final list of articles relating to methodology and findings. Under our inclusion criteria a total of 28 studies, with baseline years ranging from 1990 to 2012, were included in the review, 19 conducted in high-income countries of the region. Reviewed studies assessed cost-effectiveness of interventions for tobacco control, alcohol reduction, salt intake control, physical activity and dietary interventions. The majority of cost-effectiveness analyses were simulation analyses mostly relying on developed country data, and only 6 studies used effectiveness data from RCTs in the region. Other than for Australia, no direct conclusions could be drawn about cost-effectiveness of interventions targeting behavioural risk factors due to the small number of studies, interventions that varied widely in design, and varied methods for measurement of costs associated with interventions. Good quality cost-effectiveness information on interventions targeting behavioural interventions for the Asia-Pacific region remains a major gap in the literature.

Cost-effectiveness analysis of fidaxomicin versus vancomycin in Clostridium difficile infection

PubMed Central

Nathwani, Dilip; Cornely, Oliver A.; Van Engen, Anke K.; Odufowora-Sita, Olatunji; Retsa, Peny; Odeyemi, Isaac A. O.

2014-01-01

Objectives Fidaxomicin was non-inferior to vancomycin with respect to clinical cure rates in the treatment of Clostridium difficile infections (CDIs) in two Phase III trials, but was associated with significantly fewer recurrences than vancomycin. This economic analysis investigated the cost-effectiveness of fidaxomicin compared with vancomycin in patients with severe CDI and in patients with their first CDI recurrence. Methods A 1 year time horizon Markov model with seven health states was developed from the perspective of Scottish public healthcare providers. Model inputs for effectiveness, resource use, direct costs and utilities were obtained from published sources and a Scottish expert panel. The main model outcome was the incremental cost-effectiveness ratio (ICER), expressed as cost per quality-adjusted life year (QALY), for fidaxomicin versus vancomycin; ICERs were interpreted using willingness-to-pay thresholds of £20 000/QALY and £30 000/QALY. One-way and probabilistic sensitivity analyses were performed. Results Total costs were similar with fidaxomicin and vancomycin in patients with severe CDI (£14 515 and £14 344, respectively) and in patients with a first recurrence (£16 535 and £16 926, respectively). Improvements in clinical outcomes with fidaxomicin resulted in small QALY gains versus vancomycin (severe CDI, +0.010; patients with first recurrence, +0.019). Fidaxomicin was cost-effective in severe CDI (ICER £16 529/QALY) and dominant (i.e. more effective and less costly) in patients with a first recurrence. The probability that fidaxomicin was cost-effective at a willingness-to-pay threshold of £30 000/QALY was 60% for severe CDI and 68% in a first recurrence. Conclusions Fidaxomicin is cost-effective in patients with severe CDI and in patients with a first CDI recurrence versus vancomycin. PMID:25096079

Developing cost effective plans for low volume bridges

DOT National Transportation Integrated Search

2006-09-01

There is currently an escalating concern across the state of Kansas with respect to the age : and condition of low volume bridges and methods available to modify or replace them. A : high percentage of low volume bridges in the state of Kansas requir...

Preventing recurrent ankle sprains: Is the use of an App more cost-effective than a printed Booklet? Results of a RCT.

PubMed

Van Reijen, M; Vriend, I; van Mechelen, W; Verhagen, E A

2018-02-01

Recurrent ankle sprains can be reduced by following a neuromuscular training (NMT) program via a printed Booklet or a mobile application. Regarding the high incidence of ankle sprains, cost-effectiveness regarding implementation can have a large effect on total societal costs. In this economic analysis, we evaluated whether the method of implementing a proven effective NMT program using an App or a Booklet resulted in differences in injury incidence rates leading to costs and hence to differences in cost-effectiveness. In total, 220 athletes with a previous ankle sprain were recruited for this randomized controlled trial with a follow-up of 12 months. Half of the athletes used the freely available "Strengthen your ankle" App and the other half received a printed Booklet. After the 8-week program, athletes were questioned monthly on their recurrent injuries. Primary outcome measures were incidence density of ankle injury and incremental cost-effectiveness ratio (ICER). During follow-up, 31 athletes suffered from a recurrent ankle sprain that led to costs resulting in a hazard ratio of 1.13 (95% CI: 0.56-2.27). The incremental cost-effectiveness ratio of the App group in comparison with the Booklet group was €361.52. The CE plane shows that there was neither a difference in effects nor in costs between both intervention methods. This study showed that the method of implementing the NMT program using an App or a Booklet led to similar cost-effectiveness ratios and the same occurrence of recurrent injuries leading to costs. Both the App and the Booklet can be used to prevent recurrent ankle injuries, showing no differences in (cost-) effectiveness at 12-month follow-up. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Cost-effectiveness of different interferon beta products for relapsing-remitting and secondary progressive multiple sclerosis: Decision analysis based on long-term clinical data and switchable treatments

PubMed Central

2013-01-01

Background Multiple sclerosis (MS) is a highly debilitating immune mediated disorder and the second most common cause of neurological disability in young and middle-aged adults. Iran is amongst high MS prevalence countries (50/100,000). Economic burden of MS is a topic of important deliberation in economic evaluations study. Therefore determining of cost-effectiveness interferon beta (INF β) and their copied biopharmaceuticals (CBPs) and biosimilars products is significant issue for assessment of affordability in Lower-middle-income countries (LMICs). Methods A literature-based Markov model was developed to assess the cost-effectiveness of three INF βs products compared with placebo for managing a hypothetical cohort of patients diagnosed with relapsing remitting MS (RRMS) in Iran from a societal perspective. Health states were based on the Kurtzke Expanded Disability Status Scale (EDSS). Disease progression transition probabilities for symptom management and INF β therapies were obtained from natural history studies and multicenter randomized controlled trials and their long term follow up for RRMS and secondary progressive MS (SPMS). A cross sectional study has been developed to evaluate cost and utility. Transitions among health states occurred in 2-years cycles for fifteen cycles and switching to other therapies was allowed. Calculations of costs and utilities were established by attachment of decision trees to the overall model. The incremental cost effectiveness ratio (ICER) of cost/quality adjusted life year (QALY) for all available INF β products (brands, biosimilars and CBPs) were considered. Both costs and utilities were discounted. Sensitivity analyses were done to assess robustness of model. Results ICER for Avonex, Rebif and Betaferon was 18712, 11832, 15768 US Dollars ($) respectively when utility attained from literature review has been considered. ICER for available CBPs and biosimilars in Iran was $847, $6964 and $11913. Conclusions The Markov pharmacoeconomics model determined that according to suggested threshold for developing countries by world health organization, all brand INF β products are cost effective in Iran except Avonex. The best strategy among INF β therapies is CBP intramuscular INF β-1a (Cinnovex). Results showed that a policy of encouraging accessibility to CBPs and biosimilars could make even high technology products cost-effective in LMICs. PMID:23800250

Target prioritization and strategy selection for active case-finding of pulmonary tuberculosis: a tool to support country-level project planning.

PubMed

Nishikiori, Nobuyuki; Van Weezenbeek, Catharina

2013-02-02

Despite the progress made in the past decade, tuberculosis (TB) control still faces significant challenges. In many countries with declining TB incidence, the disease tends to concentrate in vulnerable populations that often have limited access to health care. In light of the limitations of the current case-finding approach and the global urgency to improve case detection, active case-finding (ACF) has been suggested as an important complementary strategy to accelerate tuberculosis control especially among high-risk populations. The present exercise aims to develop a model that can be used for county-level project planning. A simple deterministic model was developed to calculate the number of estimated TB cases diagnosed and the associated costs of diagnosis. The model was designed to compare cost-effectiveness parameters, such as the cost per case detected, for different diagnostic algorithms when they are applied to different risk populations. The model was transformed into a web-based tool that can support national TB programmes and civil society partners in designing ACF activities. According to the model output, tuberculosis active case-finding can be a costly endeavor, depending on the target population and the diagnostic strategy. The analysis suggests the following: (1) Active case-finding activities are cost-effective only if the tuberculosis prevalence among the target population is high. (2) Extensive diagnostic methods (e.g. X-ray screening for the entire group, use of sputum culture or molecular diagnostics) can be applied only to very high-risk groups such as TB contacts, prisoners or people living with human immunodeficiency virus (HIV) infection. (3) Basic diagnostic approaches such as TB symptom screening are always applicable although the diagnostic yield is very limited. The cost-effectiveness parameter was sensitive to local diagnostic costs and the tuberculosis prevalence of target populations. The prioritization of appropriate target populations and careful selection of cost-effective diagnostic strategies are critical prerequisites for rational active case-finding activities. A decision to conduct such activities should be based on the setting-specific cost-effectiveness analysis and programmatic assessment. A web-based tool was developed and is available to support national tuberculosis programmes and partners in the formulation of cost-effective active case-finding activities at the national and subnational levels.

Evolution of Safety Analysis to Support New Exploration Missions

NASA Technical Reports Server (NTRS)

Thrasher, Chard W.

2008-01-01

NASA is currently developing the Ares I launch vehicle as a key component of the Constellation program which will provide safe and reliable transportation to the International Space Station, back to the moon, and later to Mars. The risks and costs of the Ares I must be significantly lowered, as compared to other manned launch vehicles, to enable the continuation of space exploration. It is essential that safety be significantly improved, and cost-effectively incorporated into the design process. This paper justifies early and effective safety analysis of complex space systems. Interactions and dependences between design, logistics, modeling, reliability, and safety engineers will be discussed to illustrate methods to lower cost, reduce design cycles and lessen the likelihood of catastrophic events.

The Potential Economic Value of Screening Hospital Admissions for Clostridium difficile

PubMed Central

Bartsch, Sarah M.; Curry, Scott R.; Harrison, Lee H.; Lee, Bruce Y.

2012-01-01

Purpose Asymptomatic Clostridium difficile carriage has a prevalence reported as high as 51% to 85%; with up to 84% of incident hospital-acquired infections linked to carriers. Accurately identifying carriers may limit the spread of Clostridium difficile. Methods Since new technology adoption depends heavily on its economic value, we developed a analytic simulation model to determine the cost-effectiveness screening hospital admissions for Clostridium difficile from the hospital and third party payer perspectives. Isolation precautions were applied to patients testing positive, preventing transmission. Sensitivity analyses varied Clostridium difficile colonization rate, infection probability among secondary cases, contact isolation compliance, and screening cost. Results Screening was cost-effective [i.e., incremental cost-effectiveness ratio (ICER) ≤$50,000/QALY] for every scenario tested; all ICER values ≤$256/QALY. Screening was economically dominant (i.e., saved costs and provided health benefits) with a ≥10.3% colonization rate and ≥5.88% infection probability when contact isolation compliance was ≥25% (hospital perspective). Under some conditions screening led to cost-savings per case averted (range: $53 to $272). Conclusion Clostridium difficile screening, coupled with isolation precautions, may be a cost-effective intervention to hospitals and third party payers, based on prevalence. Limiting Clostridium difficile transmission can reduce the number of infections, thereby reducing its economic burden to the healthcare system. PMID:22752150

Recent advances in low-cost microfluidic platforms for diagnostic applications.

PubMed

Tomazelli Coltro, Wendell Karlos; Cheng, Chao-Min; Carrilho, Emanuel; de Jesus, Dosil Pereira

2014-08-01

The use of inexpensive materials and cost-effective manufacturing processes for mass production of microfluidic devices is very attractive and has spurred a variety of approaches. Such devices are particularly suited for diagnostic applications in limited resource settings. This review describes the recent and remarkable advances in the use of low-cost substrates for the development of microfluidic devices for diagnostics and clinical assays. Thus, a plethora of new and improved fabrication methods, designs, capabilities, detections, and applications of microfluidic devices fabricated with paper, plastic, and threads are covered. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Deep Brain Stimulation for Parkinson’s Disease with Early Motor Complications: A UK Cost-Effectiveness Analysis

PubMed Central

Fundament, Tomasz; Eldridge, Paul R.; Green, Alexander L.; Whone, Alan L.; Taylor, Rod S.; Williams, Adrian C.; Schuepbach, W. M. Michael

2016-01-01

Background Parkinson’s disease (PD) is a debilitating illness associated with considerable impairment of quality of life and substantial costs to health care systems. Deep brain stimulation (DBS) is an established surgical treatment option for some patients with advanced PD. The EARLYSTIM trial has recently demonstrated its clinical benefit also in patients with early motor complications. We sought to evaluate the cost-effectiveness of DBS, compared to best medical therapy (BMT), among PD patients with early onset of motor complications, from a United Kingdom (UK) payer perspective. Methods We developed a Markov model to represent the progression of PD as rated using the Unified Parkinson's Disease Rating Scale (UPDRS) over time in patients with early PD. Evidence sources were a systematic review of clinical evidence; data from the EARLYSTIM study; and a UK Clinical Practice Research Datalink (CPRD) dataset including DBS patients. A mapping algorithm was developed to generate utility values based on UPDRS data for each intervention. The cost-effectiveness was expressed as the incremental cost per quality-adjusted life-year (QALY). One-way and probabilistic sensitivity analyses were undertaken to explore the effect of parameter uncertainty. Results Over a 15-year time horizon, DBS was predicted to lead to additional mean cost per patient of £26,799 compared with BMT (£73,077/patient versus £46,278/patient) and an additional mean 1.35 QALYs (6.69 QALYs versus 5.35 QALYs), resulting in an incremental cost-effectiveness ratio of £19,887 per QALY gained with a 99% probability of DBS being cost-effective at a threshold of £30,000/QALY. One-way sensitivity analyses suggested that the results were not significantly impacted by plausible changes in the input parameter values. Conclusion These results indicate that DBS is a cost-effective intervention in PD patients with early motor complications when compared with existing interventions, offering additional health benefits at acceptable incremental cost. This supports the extended use of DBS among patients with early onset of motor complications. PMID:27441637

Cost Effectiveness of Natural Regeneration for Sustaining Production Continuity in Commercial Pine Plantations

Treesearch

T.R. Clason

2002-01-01

Reforestation is a key to production continuity in commercial pine plantations. Although natural and artificial regeneration methods have been used successfully for pine seedling establishment, it is seedling growth during early stage of plantation development that affects the financial potential of a pine plantation. A study was initiated to determine the effect of...

Emergent Literacy: A Comparison of Formal and Informal Assessment Methods.

ERIC Educational Resources Information Center

Harlin, Rebecca; Lipa, Sally

1990-01-01

Compares the effectiveness of the Concepts about Print (CAP) Test and the Metropolitan Readiness Test (MRT) in assessing the literacy development of both normal and at-risk primary students. Finds the CAP to be an effective predictor for at-risk children. Finds the MRT not worth the time, effort, and cost of administration. (RS)

An Environmentally Friendly, Cost-Effective Determination of Lead in Environmental Samples Using Anodic Stripping Voltammetry

ERIC Educational Resources Information Center

Goldcamp, Michael J.; Underwood, Melinda N.; Cloud, Joshua L.; Harshman, Sean

2008-01-01

Contamination of the environment with heavy metals such as lead presents many health risks. Simple, effective, and field-portable methods for the measurement of toxic metals in environmental samples are vital tools for evaluating the risks that these contaminants pose. This article describes the use of new developments in anodic stripping…

A bottom-up method to develop pollution abatement cost curves for coal-fired utility boilers

EPA Science Inventory

This paper illustrates a new method to create supply curves for pollution abatement using boiler-level data that explicitly accounts for technology costs and performance. The Coal Utility Environmental Cost (CUECost) model is used to estimate retrofit costs for five different NO...

Vector production in an academic environment: a tool to assess production costs.

PubMed

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan; Cornetta, Kenneth

2013-02-01

Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production.

Vector Production in an Academic Environment: A Tool to Assess Production Costs

PubMed Central

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

Homogenising time series: Beliefs, dogmas and facts

NASA Astrophysics Data System (ADS)

Domonkos, P.

2010-09-01

For obtaining reliable information about climate change and climate variability the use of high quality data series is essentially important, and one basic tool of quality improvements is the statistical homogenisation of observed time series. In the recent decades large number of homogenisation methods has been developed, but the real effects of their application on time series are still not known entirely. The ongoing COST HOME project (COST ES0601) is devoted to reveal the real impacts of homogenisation methods more detailed and with higher confidence than earlier. As part of the COST activity, a benchmark dataset was built whose characteristics approach well the characteristics of real networks of observed time series. This dataset offers much better opportunity than ever to test the wide variety of homogenisation methods, and analyse the real effects of selected theoretical recommendations. The author believes that several old theoretical rules have to be re-evaluated. Some examples of the hot questions, a) Statistically detected change-points can be accepted only with the confirmation of metadata information? b) Do semi-hierarchic algorithms for detecting multiple change-points in time series function effectively in practise? c) Is it good to limit the spatial comparison of candidate series with up to five other series in the neighbourhood? Empirical results - those from the COST benchmark, and other experiments too - show that real observed time series usually include several inhomogeneities of different sizes. Small inhomogeneities seem like part of the climatic variability, thus the pure application of classic theory that change-points of observed time series can be found and corrected one-by-one is impossible. However, after homogenisation the linear trends, seasonal changes and long-term fluctuations of time series are usually much closer to the reality, than in raw time series. The developers and users of homogenisation methods have to bear in mind that the eventual purpose of homogenisation is not to find change-points, but to have the observed time series with statistical properties those characterise well the climate change and climate variability.

Estimating Airline Operating Costs

NASA Technical Reports Server (NTRS)

Maddalon, D. V.

1978-01-01

The factors affecting commercial aircraft operating and delay costs were used to develop an airline operating cost model which includes a method for estimating the labor and material costs of individual airframe maintenance systems. The model permits estimates of aircraft related costs, i.e., aircraft service, landing fees, flight attendants, and control fees. A method for estimating the costs of certain types of airline delay is also described.

Cost-effectiveness of dengue vaccination in Yucatán, Mexico using a dynamic dengue transmission model

PubMed Central

Shim, Eunha

2017-01-01

Background The incidence of dengue fever (DF) is steadily increasing in Mexico, burdening health systems with consequent morbidities and mortalities. On December 9th, 2015, Mexico became the first country for which the dengue vaccine was approved for use. In anticipation of a vaccine rollout, analysis of the cost-effectiveness of the dengue vaccination program that quantifies the dynamics of disease transmission is essential. Methods We developed a dynamic transmission model of dengue in Yucatán, Mexico and its proposed vaccination program to incorporate herd immunity into our analysis of cost-effectiveness analysis. Our model also incorporates important characteristics of dengue epidemiology, such as clinical cross-immunity and susceptibility enhancement upon secondary infection. Using our model, we evaluated the cost-effectiveness and economic impact of an imperfect dengue vaccine in Yucatán, Mexico. Conclusions Our study indicates that a dengue vaccination program would prevent 90% of cases of symptomatic DF incidence as well as 90% of dengue hemorrhagic fever (DHF) incidence and dengue-related deaths annually. We conclude that a dengue vaccine program in Yucatán, Mexico would be very cost-effective as long as the vaccination cost per individual is less than $140 and $214 from health care and societal perspectives, respectively. Furthermore, at an exemplary vaccination cost of $250 USD per individual on average, dengue vaccination is likely to be cost-effective 43% and 88% of the time from health care and societal perspectives, respectively. PMID:28380060

Cost-effectiveness of preventing dental caries and full mouth dental reconstructions among Alaska Native children in the Yukon–Kuskokwim delta region of Alaska

PubMed Central

Atkins, Charisma Y.; Thomas, Timothy K.; Lenaker, Dane; Day, Gretchen M.; Hennessy, Thomas W.; Meltzer, Martin I.

2016-01-01

Objective We conducted a cost-effectiveness analysis of five specific dental interventions to help guide resource allocation. Methods We developed a spreadsheet-based tool, from the healthcare payer perspective, to evaluate the cost effectiveness of specific dental interventions that are currently used among Alaska Native children (6-60 months). Interventions included: water fluoridation, dental sealants, fluoride varnish, tooth brushing with fluoride toothpaste, and conducting initial dental exams on children <18 months of age. We calculated the cost-effectiveness ratio of implementing the proposed interventions to reduce the number of carious teeth and full mouth dental reconstructions (FMDRs) over 10 years. Results A total of 322 children received caries treatments completed by a dental provider in the dental chair, while 161 children received FMDRs completed by a dental surgeon in an operating room. The average cost of treating dental caries in the dental chair was $1,467 (~258,000 per year); while the cost of treating FMDRs was $9,349 (~1.5 million per year). All interventions were shown to prevent caries and FMDRs; however tooth brushing prevented the greatest number of caries at minimum and maximum effectiveness with 1,433 and 1,910, respectively. Tooth brushing also prevented the greatest number of FMDRs (159 and 211) at minimum and maximum effectiveness. Conclusions All of the dental interventions evaluated were shown to produce cost savings. However, the level of that cost saving is dependent on the intervention chosen. PMID:26990678

Rural school nurse perception of book studies as an effective method for professional development.

PubMed

Gray, Lorali

2014-05-01

School nurses who serve public school districts in rural Northwest Washington face barriers in accessing Continuing Education (CE) for professional development as they often practice in remote, isolated school communities. Acknowledging these barriers, the author discusses the inclusion of book studies within an existing training structure as an innovative method of providing professional development. By utilizing training that is already attended by rural school nurses, CE can be enhanced without incurring additional travel, cost, or training time. The school nurse's perception of the effectiveness of book studies as a CE method was examined per a descriptive, qualitative program evaluation. Over a period of 5 years, evaluation and feedback data from 12 rural school nurses were compiled from nine individual school nurse book study evaluations and one general satisfaction survey. Findings indicated overall school nurse satisfaction and belief that school nurse book studies are an effective and beneficial method for the delivery of professional development--a method that promotes collaborative learning and collegiality, informs practice, and provides insight into the broader health and social issues impacting today's students.

Systematic review of reusable versus disposable laparoscopic instruments: costs and safety.

PubMed

Siu, Joey; Hill, Andrew G; MacCormick, Andrew D

2017-01-01

The quality of instruments and surgical expertise in minimally invasive surgery has developed markedly in the last two decades. Attention is now being turned to ways to allow surgeons to adopt more cost-effective and environmental-friendly approaches. This review explores current evidence on the cost and environmental impact of reusable versus single-use instruments. In addition, we aim to compare their quality, functionality and associated clinical outcomes. The Medline and EMBASE databases were searched for relevant literature from January 2000 to May 2015. Subject headings were Equipment Reuse/, Disposable Equipment/, Cholecystectomy/, Laparoscopic/, Laparoscopy/, Surgical Instruments/, Medical Waste Disposal/, Waste Management/, Medical Waste/, Environmental Sustainability/ and Sterilization/. There are few objective comparative analyses between single-use versus reusable instruments. Current evidence suggests that limiting use of disposal instruments to necessity may hold both economical and environmental advantages. Theoretical advantages of single-use instruments in quality, safety, sterility, ease of use and importantly patient outcomes have rarely been examined. Cost-saving methods, environmental-friendly methods, global operative costs, hidden costs, sterilization methods and quality assurance systems vary greatly between studies making it difficult to gain an overview of the comparison between single-use and reusable instruments. Further examination of cost comparisons between disposable and reusable instruments is necessary while externalized environmental costs, instrument function and safety are also important to consider in future studies. © 2016 Royal Australasian College of Surgeons.

Detecting and treating occlusal caries lesions: a cost-effectiveness analysis.

PubMed

Schwendicke, F; Stolpe, M; Meyer-Lueckel, H; Paris, S

2015-02-01

The health gains and costs resulting from using different caries detection strategies might not only depend on the accuracy of the used method but also the treatment emanating from its use in different populations. We compared combinations of visual-tactile, radiographic, or laser-fluorescence-based detection methods with 1 of 3 treatments (non-, micro-, and invasive treatment) initiated at different cutoffs (treating all or only dentinal lesions) in populations with low or high caries prevalence. A Markov model was constructed to follow an occlusal surface in a permanent molar in an initially 12-y-old male German patient over his lifetime. Prevalence data and transition probabilities were extracted from the literature, while validity parameters of different methods were synthesized or obtained from systematic reviews. Microsimulations were performed to analyze the model, assuming a German health care setting and a mixed public-private payer perspective. Radiographic and fluorescence-based methods led to more overtreatments, especially in populations with low prevalence. For the latter, combining visual-tactile or radiographic detection with microinvasive treatment retained teeth longest (mean 66 y) at lowest costs (329 and 332 Euro, respectively), while combining radiographic or fluorescence-based detections with invasive treatment was the least cost-effective (<60 y, >700 Euro). In populations with high prevalence, combining radiographic detection with microinvasive treatment was most cost-effective (63 y, 528 Euro), while sensitive detection methods combined with invasive treatments were again the least cost-effective (<59 y, >690 Euro). The suitability of detection methods differed significantly between populations, and the cost-effectiveness was greatly influenced by the treatment initiated after lesion detection. The accuracy of a detection method relative to a "gold standard" did not automatically convey into better health or reduced costs. Detection methods should be evaluated not only against their criterion validity but also the long-term effects resulting from their use in different populations. © International & American Associations for Dental Research 2014.

Innovative Method for Developing a Helium Pressurant Tank Suitable for the Upper Stage Flight Experiment

NASA Technical Reports Server (NTRS)

DeLay, Tom K.; Munafo, Paul (Technical Monitor)

2001-01-01

The AFRL USFE project is an experimental test bed for new propulsion technologies. It will utilize ambient temperature fuel and oxidizers (Kerosene and Hydrogen peroxide). The system is pressure fed, not pump fed, and will utilize a helium pressurant tank to drive the system. Mr. DeLay has developed a method for cost effectively producing a unique, large pressurant tank that is not commercially available. The pressure vessel is a layered composite structure with an electroformed metallic permeation barrier. The design/process is scalable and easily adaptable to different configurations with minimal cost in tooling development 1/3 scale tanks have already been fabricated and are scheduled for testing. The full-scale pressure vessel (50" diameter) design will be refined based on the performance of the sub-scale tank. The pressure vessels have been designed to operate at 6,000 psi. a PV/W of 1.92 million is anticipated.

Dynamic modelling of costs and health consequences of school closure during an influenza pandemic

PubMed Central

2012-01-01

Background The purpose of this article is to evaluate the cost-effectiveness of school closure during a potential influenza pandemic and to examine the trade-off between costs and health benefits for school closure involving different target groups and different closure durations. Methods We developed two models: a dynamic disease model capturing the spread of influenza and an economic model capturing the costs and benefits of school closure. Decisions were based on quality-adjusted life years gained using incremental cost-effectiveness ratios. The disease model is an age-structured SEIR compartmental model based on the population of Oslo. We studied the costs and benefits of school closure by varying the age targets (kindergarten, primary school, secondary school) and closure durations (1–10 weeks), given pandemics with basic reproductive number of 1.5, 2.0 or 2.5. Results The cost-effectiveness of school closure varies depending on the target group, duration and whether indirect costs are considered. Using a case fatality rate (CFR) of 0.1-0.2% and with current cost-effectiveness threshold for Norway, closing secondary school is the only cost-effective strategy, when indirect costs are included. The most cost-effective strategies would be closing secondary schools for 8 weeks if R0=1.5, 6 weeks if R0=2.0, and 4 weeks if R0= 2.5. For severe pandemics with case fatality rates of 1-2%, similar to the Spanish flu, or when indirect costs are disregarded, the optimal strategy is closing kindergarten, primary and secondary school for extended periods of time. For a pandemic with 2009 H1N1 characteristics (mild severity and low transmissibility), closing schools would not be cost-effective, regardless of the age target of school children. Conclusions School closure has moderate impact on the epidemic’s scope, but the resulting disruption to society imposes a potentially great cost in terms of lost productivity from parents’ work absenteeism. PMID:23140513

Lost productivity due to premature mortality in developed and emerging countries: an application to smoking cessation

PubMed Central

2012-01-01

Background Researchers and policy makers have determined that accounting for productivity costs, or “indirect costs,” may be as important as including direct medical expenditures when evaluating the societal value of health interventions. These costs are also important when estimating the global burden of disease. The estimation of indirect costs is commonly done on a country-specific basis. However, there are few studies that evaluate indirect costs across countries using a consistent methodology. Methods Using the human capital approach, we developed a model that estimates productivity costs as the present value of lifetime earnings (PVLE) lost due to premature mortality. Applying this methodology, the model estimates productivity costs for 29 selected countries, both developed and emerging. We also provide an illustration of how the inclusion of productivity costs contributes to an analysis of the societal burden of smoking. A sensitivity analysis is undertaken to assess productivity costs on the basis of the friction cost approach. Results PVLE estimates were higher for certain subpopulations, such as men, younger people, and people in developed countries. In the case study, productivity cost estimates from our model showed that productivity loss was a substantial share of the total cost burden of premature mortality due to smoking, accounting for over 75 % of total lifetime costs in the United States and 67 % of total lifetime costs in Brazil. Productivity costs were much lower using the friction cost approach among those of working age. Conclusions Our PVLE model is a novel tool allowing researchers to incorporate the value of lost productivity due to premature mortality into economic analyses of treatments for diseases or health interventions. We provide PVLE estimates for a number of emerging and developed countries. Including productivity costs in a health economics study allows for a more comprehensive analysis, and, as demonstrated by our illustration, can have important effects on the results and conclusions. PMID:22731620

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall designmore » with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Cost effective nuclear commercial grade dedication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maletz, J.J.; Marston, M.J.

1991-01-01

This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurementmore » activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs.« less

Design of a trial-based economic evaluation on the cost-effectiveness of employability interventions among work disabled employees or employees at risk of work disability: The CASE-study

PubMed Central

2012-01-01

Background In the Netherlands, absenteeism and reduced productivity due to work disability lead to high yearly costs reaching almost 5% of the gross national product. To reduce the economic burden of sick leave and reduced productivity, different employability interventions for work-disabled employees or employees at risk of work disability have been developed. Within this study, called 'CASE-study' (Cost-effectiveness Analysis of Sustainable Employability), five different employability interventions directed at work disabled employees with divergent health complaints will be analysed on their effectiveness and cost-effectiveness. This paper describes a consistent and transparent methodological design to do so. Methods/design Per employability intervention 142 participants are needed whereof approximately 66 participants receiving the intervention will be compared with 66 participants receiving usual care. Based on the intervention-specific characteristics, a randomized control trial or a quasi-experiment with match-criteria will be conducted. Notwithstanding the study design, eligible participants will be employees aged 18 to 63, working at least 12 h per week, and at risk of work disability, or already work-disabled due to medical restrictions. The primary outcome will be the duration of sick leave. Secondary outcomes are health status and quality of life. Outcomes will be assessed at baseline and then 6, 12 and 18 months later. Economic costs will consist of healthcare costs and cost of lost production due to work disability, and will be evaluated from a societal perspective. Discussion The CASE-study is the first to conduct economic evaluations of multiple different employability interventions based on a similar methodological framework. The cost-effectiveness results for every employability intervention will be published in 2014, but the methods, strengths and weaknesses of the study protocol are discussed in this paper. To contribute to treatment options in occupational health practice and enable the development of guidelines on how to conduct economic evaluation better suited to this field; this paper provides an important first step. Trial registration Four trials involved in the CASE-study are registered with the Netherlands Trial Registry: Care for Work (NTR2886), Health and Motion (NTR3111), Guidance to Excel in Return to Work (NTR3151), Care for Companies/Second Care (NTR3136). PMID:22257557

Evaluating Digital Health Interventions: Key Questions and Approaches.

PubMed

Murray, Elizabeth; Hekler, Eric B; Andersson, Gerhard; Collins, Linda M; Doherty, Aiden; Hollis, Chris; Rivera, Daniel E; West, Robert; Wyatt, Jeremy C

2016-11-01

Digital health interventions have enormous potential as scalable tools to improve health and healthcare delivery by improving effectiveness, efficiency, accessibility, safety, and personalization. Achieving these improvements requires a cumulative knowledge base to inform development and deployment of digital health interventions. However, evaluations of digital health interventions present special challenges. This paper aims to examine these challenges and outline an evaluation strategy in terms of the research questions needed to appraise such interventions. As they are at the intersection of biomedical, behavioral, computing, and engineering research, methods drawn from all of these disciplines are required. Relevant research questions include defining the problem and the likely benefit of the digital health intervention, which in turn requires establishing the likely reach and uptake of the intervention, the causal model describing how the intervention will achieve its intended benefit, key components, and how they interact with one another, and estimating overall benefit in terms of effectiveness, cost effectiveness, and harms. Although RCTs are important for evaluation of effectiveness and cost effectiveness, they are best undertaken only when: (1) the intervention and its delivery package are stable; (2) these can be implemented with high fidelity; and (3) there is a reasonable likelihood that the overall benefits will be clinically meaningful (improved outcomes or equivalent outcomes at lower cost). Broadening the portfolio of research questions and evaluation methods will help with developing the necessary knowledge base to inform decisions on policy, practice, and research. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

HIV, tuberculosis, and noncommunicable diseases: what is known about the costs, effects, and cost-effectiveness of integrated care?

PubMed

Hyle, Emily P; Naidoo, Kogieleum; Su, Amanda E; El-Sadr, Wafaa M; Freedberg, Kenneth A

2014-09-01

Unprecedented investments in health systems in low- and middle-income countries (LMICs) have resulted in more than 8 million individuals on antiretroviral therapy. Such individuals experience dramatically increased survival but are increasingly at risk of developing common noncommunicable diseases (NCDs). Integrating clinical care for HIV, other infectious diseases, and NCDs could make health services more effective and provide greater value. Cost-effectiveness analysis is a method to evaluate the clinical benefits and costs associated with different health care interventions and offers guidance for prioritization of investments and scale-up, especially as resources are increasingly constrained. We first examine tuberculosis and HIV as 1 example of integrated care already successfully implemented in several LMICs; we then review the published literature regarding cervical cancer and depression as 2 examples of NCDs for which integrating care with HIV services could offer excellent value. Direct evidence of the benefits of integrated services generally remains scarce; however, data suggest that improved effectiveness and reduced costs may be attained by integrating additional services with existing HIV clinical care. Further investigation into clinical outcomes and costs of care for NCDs among people living with HIV in LMICs will help to prioritize specific health care services by contributing to an understanding of the affordability and implementation of an integrated approach.

Low-cost, light-switched, forward-osmosis desalination system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warner, John C.

The looming water crisis is the second largest issue facing humanity after energy. In order to meet the increasing demand for clean water, new efficient and low-cost methods of water purification must be developed. A promising method for dry regions with sea borders is the desalination of seawater. While there remain many disadvantages to current desalination techniques, such as environmental pollution and high cost, there is a strong opportunity for new technology development in this area. In this Phase I program, the development of a light-switchable, low-cost desalination system was explored. The system requires photoselective switching of water solubility. Ninemore » new light-switchable spiropyran-based small molecule and polymeric materials were synthesized, and methods to evaluate their desalination potential were developed and utilized. Severable promising spiropyran analogues proved to be photoswitchable, but so far sufficient photoswitchablity of solubility for a commercial desalination system was not achieved. More development is required.« less

Low Cost and Energy Efficient Methods for the Manufacture of Semi-Solid (SSM) Feedstock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diran Apelian; Qingyue Pan; Makhlouf Makhlouf

2005-11-07

The SSM Consortium (now ACRC) at WPI has been carrying out fundamental, pre-competitive research in SSM for several years. Current and past research (at WPI) has generated many results of fundamental and applied nature, which are available to the SSM community. These include materials characterization, yield stress effects, alloy development, rheological properties, process modeling/simulation, semi-solid slurry formation, etc. Alternative method to produce SSM slurries at lower processing costs and with reduced energy consumption is a critical need. The production of low cost SSM feedstock will certainly lead to a dramatic increase in the tonnage of castings produced by SSM, andmore » will provide end users such as the transportation industry, with lighter, cheaper and high performance materials. In this program, the research team has addressed three critical issues in semi-solid processing. They are: (1) Development of low cost, reliable slurry-on-demand approaches for semi-solid processing; (2) Application of the novel permanent grain refining technology-SiBloy for the manufacture of high-quality SSM feedstock, and (3) Development of computational and modeling tools for semi-solid processing to enhance SSM process control. Salient results from these studies are summarized and detailed in our final technical report.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffery, D.J.

This report considers a wide range of possible methods for improving the route guidance information available to drivers, and for saving up to L600M per year of national resource costs which are effectively wasted by drivers who fail to select optimum routes for unfamiliar journeys. The methods considered include improvements to maps and roadsigns, both of which could prove highly cost effective although they would leave some 80 per cent of the wastage unrecovered. A substantial proportion of this remaining wastage might be avoided with a Viewdata route planning and guidance scheme which could be achieved at relatively low costmore » to public funds, or with automatic systems. Of a range of automatic electronic guidance systems considered the most cost effective solution would be provided by a system which used buried loops to provide a two-way communication link between a roadside and a vehicle unit. Such a scheme would necessarily involve a considerable investment from public funds, but would offer the greatest potential for further development and, in particular, could provide the basis of a comprehensive traffic control tool.« less

A simplified economic filter for open-pit mining and heap-leach recovery of copper in the United States

USGS Publications Warehouse

Long, Keith R.; Singer, Donald A.

2001-01-01

Determining the economic viability of mineral deposits of various sizes and grades is a critical task in all phases of mineral supply, from land-use management to mine development. This study evaluates two simple tools for estimating the economic viability of porphyry copper deposits mined by open-pit, heap-leach methods when only limited information on these deposits is available. These two methods are useful for evaluating deposits that either (1) are undiscovered deposits predicted by a mineral resource assessment, or (2) have been discovered but for which little data has been collected or released. The first tool uses ordinary least-squared regression analysis of cost and operating data from selected deposits to estimate a predictive relationship between mining rate, itself estimated from deposit size, and capital and operating costs. The second method uses cost models developed by the U.S. Bureau of Mines (Camm, 1991) updated using appropriate cost indices. We find that the cost model method works best for estimating capital costs and the empirical model works best for estimating operating costs for mines to be developed in the United States.

Antihypertensive drugs: a perspective on pharmaceutical price erosion and its impact on cost-effectiveness.

PubMed

Refoios Camejo, Rodrigo; McGrath, Clare; Herings, Ron; Meerding, Willem-Jan; Rutten, Frans

2012-01-01

When comparators' prices decrease due to market competition and loss of exclusivity, the incremental clinical effectiveness required for a new technology to be cost-effective is expected to increase; and/or the minimum price at which it will be funded will tend to decrease. This may be, however, either unattainable physiologically or financially unviable for drug development. The objective of this study is to provide an empirical basis for this discussion by estimating the potential for price decreases to impact on the cost-effectiveness of new therapies in hypertension. Cost-effectiveness at launch was estimated for all antihypertensive drugs launched between 1998 and 2008 in the United Kingdom using hypothetical degrees of incremental clinical effectiveness within the methodologic framework applied by the UK National Institute for Health and Clinical Excellence. Incremental cost-effectiveness ratios were computed and compared with funding thresholds. In addition, the levels of incremental clinical effectiveness required to achieve specific cost-effectiveness thresholds at given prices were estimated. Significant price decreases were observed for existing drugs. This was shown to markedly affect cost-effectiveness of technologies entering the market. The required incremental clinical effectiveness was in many cases greater than physiologically possible so, as a consequence, a number of products might not be available today if current methods of economic appraisal had been applied. We conclude that the definition of cost-effectiveness thresholds is fundamental in promoting efficient innovation. Our findings demonstrate that comparator price attrition has the potential to put pressure in the pharmaceutical research model and presents a challenge to new therapies being accepted for funding. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Salivary biomarker development using genomic, proteomic and metabolomic approaches

PubMed Central

2012-01-01

The use of saliva as a diagnostic sample provides a non-invasive, cost-efficient method of sample collection for disease screening without the need for highly trained professionals. Saliva collection is far more practical and safe compared with invasive methods of sample collection, because of the infection risk from contaminated needles during, for example, blood sampling. Furthermore, the use of saliva could increase the availability of accurate diagnostics for remote and impoverished regions. However, the development of salivary diagnostics has required technical innovation to allow stabilization and detection of analytes in the complex molecular mixture that is saliva. The recent development of cost-effective room temperature analyte stabilization methods, nucleic acid pre-amplification techniques and direct saliva transcriptomic analysis have allowed accurate detection and quantification of transcripts found in saliva. Novel protein stabilization methods have also facilitated improved proteomic analyses. Although candidate biomarkers have been discovered using epigenetic, transcriptomic, proteomic and metabolomic approaches, transcriptomic analyses have so far achieved the most progress in terms of sensitivity and specificity, and progress towards clinical implementation. Here, we review recent developments in salivary diagnostics that have been accomplished using genomic, transcriptomic, proteomic and metabolomic approaches. PMID:23114182

Seasonal Influenza Vaccination for Children in Thailand: A Cost-Effectiveness Analysis

PubMed Central

Meeyai, Aronrag; Praditsitthikorn, Naiyana; Kotirum, Surachai; Kulpeng, Wantanee; Putthasri, Weerasak; Cooper, Ben S.; Teerawattananon, Yot

2015-01-01

Background Seasonal influenza is a major cause of mortality worldwide. Routine immunization of children has the potential to reduce this mortality through both direct and indirect protection, but has not been adopted by any low- or middle-income countries. We developed a framework to evaluate the cost-effectiveness of influenza vaccination policies in developing countries and used it to consider annual vaccination of school- and preschool-aged children with either trivalent inactivated influenza vaccine (TIV) or trivalent live-attenuated influenza vaccine (LAIV) in Thailand. We also compared these approaches with a policy of expanding TIV coverage in the elderly. Methods and Findings We developed an age-structured model to evaluate the cost-effectiveness of eight vaccination policies parameterized using country-level data from Thailand. For policies using LAIV, we considered five different age groups of children to vaccinate. We adopted a Bayesian evidence-synthesis framework, expressing uncertainty in parameters through probability distributions derived by fitting the model to prospectively collected laboratory-confirmed influenza data from 2005-2009, by meta-analysis of clinical trial data, and by using prior probability distributions derived from literature review and elicitation of expert opinion. We performed sensitivity analyses using alternative assumptions about prior immunity, contact patterns between age groups, the proportion of infections that are symptomatic, cost per unit vaccine, and vaccine effectiveness. Vaccination of children with LAIV was found to be highly cost-effective, with incremental cost-effectiveness ratios between about 2,000 and 5,000 international dollars per disability-adjusted life year averted, and was consistently preferred to TIV-based policies. These findings were robust to extensive sensitivity analyses. The optimal age group to vaccinate with LAIV, however, was sensitive both to the willingness to pay for health benefits and to assumptions about contact patterns between age groups. Conclusions Vaccinating school-aged children with LAIV is likely to be cost-effective in Thailand in the short term, though the long-term consequences of such a policy cannot be reliably predicted given current knowledge of influenza epidemiology and immunology. Our work provides a coherent framework that can be used for similar analyses in other low- and middle-income countries. PMID:26011712

Generating Electricity during Walking with a Lower Limb-Driven Energy Harvester: Targeting a Minimum User Effort

PubMed Central

Shepertycky, Michael; Li, Qingguo

2015-01-01

Background Much research in the field of energy harvesting has sought to develop devices capable of generating electricity during daily activities with minimum user effort. No previous study has considered the metabolic cost of carrying the harvester when determining the energetic effects it has on the user. When considering device carrying costs, no energy harvester to date has demonstrated the ability to generate a substantial amount of electricity (> 5W) while maintaining a user effort at the same level or lower than conventional power generation methods (e.g. hand crank generator). Methodology/Principal Findings We developed a lower limb-driven energy harvester that is able to generate approximately 9W of electricity. To quantify the performance of the harvester, we introduced a new performance measure, total cost of harvesting (TCOH), which evaluates a harvester’s overall efficiency in generating electricity including the device carrying cost. The new harvester captured the motion from both lower limbs and operated in the generative braking mode to assist the knee flexor muscles in slowing the lower limbs. From a testing on 10 participants under different walking conditions, the harvester achieved an average TCOH of 6.1, which is comparable to the estimated TCOH for a conventional power generation method of 6.2. When generating 5.2W of electricity, the TCOH of the lower limb-driven energy harvester (4.0) is lower than that of conventional power generation methods. Conclusions/Significance These results demonstrated that the lower limb-driven energy harvester is an energetically effective option for generating electricity during daily activities. PMID:26039493

Generating Electricity during Walking with a Lower Limb-Driven Energy Harvester: Targeting a Minimum User Effort.

PubMed

Shepertycky, Michael; Li, Qingguo

2015-01-01

Much research in the field of energy harvesting has sought to develop devices capable of generating electricity during daily activities with minimum user effort. No previous study has considered the metabolic cost of carrying the harvester when determining the energetic effects it has on the user. When considering device carrying costs, no energy harvester to date has demonstrated the ability to generate a substantial amount of electricity (> 5W) while maintaining a user effort at the same level or lower than conventional power generation methods (e.g. hand crank generator). We developed a lower limb-driven energy harvester that is able to generate approximately 9W of electricity. To quantify the performance of the harvester, we introduced a new performance measure, total cost of harvesting (TCOH), which evaluates a harvester's overall efficiency in generating electricity including the device carrying cost. The new harvester captured the motion from both lower limbs and operated in the generative braking mode to assist the knee flexor muscles in slowing the lower limbs. From a testing on 10 participants under different walking conditions, the harvester achieved an average TCOH of 6.1, which is comparable to the estimated TCOH for a conventional power generation method of 6.2. When generating 5.2W of electricity, the TCOH of the lower limb-driven energy harvester (4.0) is lower than that of conventional power generation methods. These results demonstrated that the lower limb-driven energy harvester is an energetically effective option for generating electricity during daily activities.

Presenting evidence and summary measures to best inform societal decisions when comparing multiple strategies.

PubMed

Eckermann, Simon; Willan, Andrew R

2011-07-01

Multiple strategy comparisons in health technology assessment (HTA) are becoming increasingly important, with multiple alternative therapeutic actions, combinations of therapies and diagnostic and genetic testing alternatives. Comparison under uncertainty of incremental cost, effects and cost effectiveness across more than two strategies is conceptually and practically very different from that for two strategies, where all evidence can be summarized in a single bivariate distribution on the incremental cost-effectiveness plane. Alternative methods for comparing multiple strategies in HTA have been developed in (i) presenting cost and effects on the cost-disutility plane and (ii) summarizing evidence with multiple strategy cost-effectiveness acceptability (CEA) and expected net loss (ENL) curves and frontiers. However, critical questions remain for the analyst and decision maker of how these techniques can be best employed across multiple strategies to (i) inform clinical and cost inference in presenting evidence, and (ii) summarize evidence of cost effectiveness to inform societal reimbursement decisions where preferences may be risk neutral or somewhat risk averse under the Arrow-Lind theorem. We critically consider how evidence across multiple strategies can be best presented and summarized to inform inference and societal reimbursement decisions, given currently available methods. In the process, we make a number of important original findings. First, in presenting evidence for multiple strategies, the joint distribution of costs and effects on the cost-disutility plane with associated flexible comparators varying across replicates for cost and effect axes ensure full cost and effect inference. Such inference is usually confounded on the cost-effectiveness plane with comparison relative to a fixed origin and axes. Second, in summarizing evidence for risk-neutral societal decision making, ENL curves and frontiers are shown to have advantages over the CEA frontier in directly presenting differences in expected net benefit (ENB). The CEA frontier, while identifying strategies that maximize ENB, only presents their probability of maximizing net benefit (NB) and, hence, fails to explain why strategies maximize ENB at any given threshold value. Third, in summarizing evidence for somewhat risk-averse societal decision making, trade-offs between the strategy maximizing ENB and other potentially optimal strategies with higher probability of maximizing NB should be presented over discrete threshold values where they arise. However, the probabilities informing these trade-offs and associated discrete threshold value regions should be derived from bilateral CEA curves to prevent confounding by other strategies inherent in multiple strategy CEA curves. Based on these findings, a series of recommendations are made for best presenting and summarizing cost-effectiveness evidence for reimbursement decisions when comparing multiple strategies, which are contrasted with advice for comparing two strategies. Implications for joint research and reimbursement decisions are also discussed.

Cost-Sharing of Ecological Construction Based on Trapezoidal Intuitionistic Fuzzy Cooperative Games

PubMed Central

Liu, Jiacai; Zhao, Wenjian

2016-01-01

There exist some fuzziness and uncertainty in the process of ecological construction. The aim of this paper is to develop a direct and an effective simplified method for obtaining the cost-sharing scheme when some interested parties form a cooperative coalition to improve the ecological environment of Min River together. Firstly, we propose the solution concept of the least square prenucleolus of cooperative games with coalition values expressed by trapezoidal intuitionistic fuzzy numbers. Then, based on the square of the distance in the numerical value between two trapezoidal intuitionistic fuzzy numbers, we establish a corresponding quadratic programming model to obtain the least square prenucleolus, which can effectively avoid the information distortion and uncertainty enlargement brought about by the subtraction of trapezoidal intuitionistic fuzzy numbers. Finally, we give a numerical example about the cost-sharing of ecological construction in Fujian Province in China to show the validity, applicability, and advantages of the proposed model and method. PMID:27834830

Simple and cost-effective fluorescent labeling of 5-hydroxymethylcytosine

NASA Astrophysics Data System (ADS)

Shahal, Tamar; Green, Ori; Hananel, Uri; Michaeli, Yael; Shabat, Doron; Ebenstein, Yuval

2016-12-01

The nucleobase 5-hydroxymethylcytosine (5-hmC), a modified form of cytosine, is an important epigenetic mark related to regulation of gene expression. 5-hmC levels are highly dynamic during early development and are modulated during the progression of neurodegenerative disease and cancer. We describe a spectroscopic method for the global quantification of 5-hmC in genomic DNA. This method relies on the enzymatic glucosylation of 5-hmC, followed by a glucose oxidation step that results in the formation of aldehyde moieties that are covalently linked to a fluorescent reporter by oxime ligation. The fluorescence intensity of the labeled sample is directly proportional to its 5-hmC content. We show that this simple and cost-effective technique is suitable for quantification of 5-hmC content in different mouse tissues.

Potential cost-effectiveness of universal access to modern contraceptives in Uganda.

PubMed

Babigumira, Joseph B; Stergachis, Andy; Veenstra, David L; Gardner, Jacqueline S; Ngonzi, Joseph; Mukasa-Kivunike, Peter; Garrison, Louis P

2012-01-01

Over two thirds of women who need contraception in Uganda lack access to modern effective methods. This study was conducted to estimate the potential cost-effectiveness of achieving universal access to modern contraceptives in Uganda by implementing a hypothetical new contraceptive program (NCP) from both societal and governmental (Ministry of Health (MoH)) perspectives. A Markov model was developed to compare the NCP to the status quo or current contraceptive program (CCP). The model followed a hypothetical cohort of 15-year old girls over a lifetime horizon. Data were obtained from the Uganda National Demographic and Health Survey and from published and unpublished sources. Costs, life expectancy, disability-adjusted life expectancy, pregnancies, fertility and incremental cost-effectiveness measured as cost per life-year (LY) gained, cost per disability-adjusted life-year (DALY) averted, cost per pregnancy averted and cost per unit of fertility reduction were calculated. Univariate and probabilistic sensitivity analyses were performed to examine the robustness of results. Mean discounted life expectancy and disability-adjusted life expectancy (DALE) were higher under the NCP vs. CCP (28.74 vs. 28.65 years and 27.38 vs. 27.01 respectively). Mean pregnancies and live births per woman were lower under the NCP (9.51 vs. 7.90 and 6.92 vs. 5.79 respectively). Mean lifetime societal costs per woman were lower for the NCP from the societal perspective ($1,949 vs. $1,987) and the MoH perspective ($636 vs. $685). In the incremental analysis, the NCP dominated the CCP, i.e. it was both less costly and more effective. The results were robust to univariate and probabilistic sensitivity analysis. Universal access to modern contraceptives in Uganda appears to be highly cost-effective. Increasing contraceptive coverage should be considered among Uganda's public health priorities.

Cost estimation: An expert-opinion approach. [cost analysis of research projects using the Delphi method (forecasting)

NASA Technical Reports Server (NTRS)

Buffalano, C.; Fogleman, S.; Gielecki, M.

1976-01-01

A methodology is outlined which can be used to estimate the costs of research and development projects. The approach uses the Delphi technique a method developed by the Rand Corporation for systematically eliciting and evaluating group judgments in an objective manner. The use of the Delphi allows for the integration of expert opinion into the cost-estimating process in a consistent and rigorous fashion. This approach can also signal potential cost-problem areas. This result can be a useful tool in planning additional cost analysis or in estimating contingency funds. A Monte Carlo approach is also examined.

How to perform a cost-effectiveness analysis with surrogate endpoint: renal denervation in patients with resistant hypertension (DENERHTN) trial as an example.

PubMed

Bulsei, Julie; Darlington, Meryl; Durand-Zaleski, Isabelle; Azizi, Michel

2018-04-01

Whilst much uncertainty exists as to the efficacy of renal denervation (RDN), the positive results of the DENERHTN study in France confirmed the interest of an economic evaluation in order to assess efficiency of RDN and inform local decision makers about the costs and benefits of this intervention. The uncertainty surrounding both the outcomes and the costs can be described using health economic methods such as the non-parametric bootstrap. Internationally, numerous health economic studies using a cost-effectiveness model to assess the impact of RDN in terms of cost and effectiveness compared to antihypertensive medical treatment have been conducted. The DENERHTN cost-effectiveness study was the first health economic evaluation specifically designed to assess the cost-effectiveness of RDN using individual data. Using the DENERHTN results as an example, we provide here a summary of the principle methods used to perform a cost-effectiveness analysis.

Developing cost effective plans for low volume bridges

DOT National Transportation Integrated Search

2006-09-01

There is currently an escalating concern across the state of Kansas with respect to the age and condition of low volume bridges and methods available to modify or replace them. A high percentage of low volume bridges in the state of Kansas require or...

Determining mutation density using Restriction Enzyme Sequence Comparative Analysis (RESCAN)

USDA-ARS?s Scientific Manuscript database

The average mutation density of a mutant population is a major consideration when developing resources for the efficient, cost-effective implementation of reverse genetics methods such as Targeting of Induced Local Lesions in Genomes (TILLING). Reliable estimates of mutation density can be achieved ...

Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs: Cost Assessment of Manufacturing/Design Concepts

NASA Technical Reports Server (NTRS)

Metschan, S.

2000-01-01

The objective of the Integral Airframe Structures (IAS) program was to demonstrate, for an integrally stiffened structural concept, performance and weight equal to "built-up" structure with lower manufacturing cost. This report presents results of the cost assessment for several design configuration/manufacturing method combinations. The attributes of various cost analysis models were evaluated and COSTRAN selected for this study. A process/design cost evaluation matrix was developed based on material, forming, machining, and assembly of structural sub-elements and assembled structure. A hybrid design, made from high-speed machined extruded frames that are mechanically fastened to high-speed machined plate skin/stringer panels, was identified as the most cost-effective manufacturing solution. Recurring labor and material costs of the hybrid design are up to 61 percent less than the current built-up technology baseline. This would correspond to a total cost reduction of $1.7 million per ship set for a 777-sized airplane. However, there are important outstanding issues with regard to the cost of capacity of high technology machinery, and the ability to cost-effectively provide surface finish acceptable to the commercial aircraft industry. The projected high raw material cost of large extrusions also played an important role in the trade-off between plate and extruded concepts.

Cost-utility analysis of the National truth campaign to prevent youth smoking.

PubMed

Holtgrave, David R; Wunderink, Katherine A; Vallone, Donna M; Healton, Cheryl G

2009-05-01

In 2005, the American Journal of Public Health published an article that indicated that 22% of the overall decline in youth smoking that occurred between 1999 and 2002 was directly attributable to the truth social marketing campaign launched in 2000. A remaining key question about the truth campaign is whether the economic investment in the program can be justified by the public health outcomes; that question is examined here. Standard methods of cost and cost-utility analysis were employed in accordance with the U.S. Panel on Cost-Effectiveness in Health and Medicine; a societal perspective was employed. During 2000-2002, expenditures totaled just over $324 million to develop, deliver, evaluate, and litigate the truth campaign. The base-case cost-utility analysis result indicates that the campaign was cost saving; it is estimated that the campaign recouped its costs and that just under $1.9 billion in medical costs was averted for society. Sensitivity analysis indicated that the basic determination of cost effectiveness for this campaign is robust to substantial variation in input parameters. This study suggests that the truth campaign not only markedly improved the public's health but did so in an economically efficient manner.

The cost of doing business: cost structure of electronic immunization registries.

PubMed

Fontanesi, John M; Flesher, Don S; De Guire, Michelle; Lieberthal, Allan; Holcomb, Kathy

2002-10-01

To predict the true cost of developing and maintaining an electronic immunization registry, and to set the framework for developing future cost-effective and cost-benefit analysis. Primary data collected at three immunization registries located in California, accounting for 90 percent of all immunization records in registries in the state during the study period. A parametric cost analysis compared registry development and maintenance expenditures to registry performance requirements. Data were collected at each registry through interviews, reviews of expenditure records, technical accomplishments development schedules, and immunization coverage rates. The cost of building immunization registries is predictable and independent of the hardware/software combination employed. The effort requires four man-years of technical effort or approximately $250,000 in 1998 dollars. Costs for maintaining a registry were approximately $5,100 per end user per three-year period. There is a predictable cost structure for both developing and maintaining immunization registries. The cost structure can be used as a framework for examining the cost-effectiveness and cost-benefits of registries. The greatest factor effecting improvement in coverage rates was ongoing, user-based administrative investment.

A Method for Estimating Costs and Benefits of Space Assembly and Servicing By Astronauts and Robots

NASA Technical Reports Server (NTRS)

Purves, Lloyd R.; Benfield, Mark (Technical Monitor)

2002-01-01

One aspect of designing future space missions is to determine whether Space Assembly and Servicing (SAS) is useful and, if so, what combination of robots and astronauts provides the most effective means of accomplishing it. Certain aspects of these choices, such as the societal value of developing the means for humans to live in space, do not lend themselves to quantification. However, other SAS costs and benefits can be quantified in a manner that can help select the most cost-effective SAS approach. Any space facility, whether it is assembled and serviced or not, entails an eventual replacement cost due to wear and obsolescence. Servicing can reduce this cost by limiting replacement to only failed or obsolete components. However, servicing systems, such as space robots, have their own logistics cost, and astronauts can have even greater logistics requirements. On the other hand, humans can be more capable than robots at performing dexterous and unstructured tasks, which can reduce logistics costs by allowing a reduction in mass of replacement components. Overall, the cost-effectiveness of astronaut SAS depends on its efficiency; and, if astronauts have to be wholly justified by their servicing usefulness, then the serviced space facility has to be large enough to fully occupy them.

The JPL Cost Risk Analysis Approach that Incorporates Engineering Realism

NASA Technical Reports Server (NTRS)

Harmon, Corey C.; Warfield, Keith R.; Rosenberg, Leigh S.

2006-01-01

This paper discusses the JPL Cost Engineering Group (CEG) cost risk analysis approach that accounts for all three types of cost risk. It will also describe the evaluation of historical cost data upon which this method is based. This investigation is essential in developing a method that is rooted in engineering realism and produces credible, dependable results to aid decision makers.

The Application of Sensors on Guardrails for the Purpose of Real Time Impact Detection

DTIC Science & Technology

2012-03-01

collection methods ; however, there are major differences in the measures of performance for policy goals and objectives (U.S. DOT, 2002). The goal here is...seriousness of this issue has motivated the US Department of Transportation and Transportation Research Board to develop and deploy new methods and... methods to integrate new sensing capabilities into existing Intelligent Transportation Systems in a time efficient and cost effective manner. In

Cost-Utility Analysis of Bariatric Surgery in Italy: Results of Decision-Analytic Modelling.

PubMed

Lucchese, Marcello; Borisenko, Oleg; Mantovani, Lorenzo Giovanni; Cortesi, Paolo Angelo; Cesana, Giancarlo; Adam, Daniel; Burdukova, Elisabeth; Lukyanov, Vasily; Di Lorenzo, Nicola

2017-01-01

To evaluate the cost-effectiveness of bariatric surgery in Italy from a third-party payer perspective over a medium-term (10 years) and a long-term (lifetime) horizon. A state-transition Markov model was developed, in which patients may experience surgery, post-surgery complications, diabetes mellitus type 2, cardiovascular diseases or die. Transition probabilities, costs, and utilities were obtained from the Italian and international literature. Three types of surgeries were considered: gastric bypass, sleeve gastrectomy, and adjustable gastric banding. A base-case analysis was performed for the population, the characteristics of which were obtained from surgery candidates in Italy. In the base-case analysis, over 10 years, bariatric surgery led to cost increment of EUR 2,661 and generated additional 1.1 quality-adjusted life years (QALYs). Over a lifetime, surgery led to savings of EUR 8,649, additional 0.5 life years and 3.2 QALYs. Bariatric surgery was cost-effective at 10 years with an incremental cost-effectiveness ratio of EUR 2,412/QALY and dominant over conservative management over a lifetime. In a comprehensive decision analytic model, a current mix of surgical methods for bariatric surgery was cost-effective at 10 years and cost-saving over the lifetime of the Italian patient cohort considered in this analysis. © 2017 The Author(s) Published by S. Karger GmbH, Freiburg.

Modeling the Cost-Effectiveness of Health Care Systems for Alcohol Use Disorders: How Implementation of eHealth Interventions Improves Cost-Effectiveness

PubMed Central

Lokkerbol, Joran; Riper, Heleen; Majo, Maria Cristina; Boon, Brigitte; Blankers, Matthijs

2011-01-01

Background Informing policy decisions about the cost-effectiveness of health care systems (ie, packages of clinical interventions) is probably best done using a modeling approach. To this end, an alcohol model (ALCMOD) was developed. Objective The aim of ALCMOD is to estimate the cost-effectiveness of competing health care systems in curbing alcohol use at the national level. This is illustrated for scenarios where new eHealth technologies for alcohol use disorders are introduced in the Dutch health care system. Method ALCMOD assesses short-term (12-month) incremental cost-effectiveness in terms of reductions in disease burden, that is, disability adjusted life years (DALYs) and health care budget impacts. Results Introduction of new eHealth technologies would substantially increase the cost-effectiveness of the Dutch health care system for alcohol use disorders: every euro spent under the current system returns a value of about the same size (€ 1.08, ie, a “surplus” of 8 euro cents) while the new health care system offers much better returns on investment, that is, every euro spent generates € 1.62 in health-related value. Conclusion Based on the best available evidence, ALCMOD's computations suggest that implementation of new eHealth technologies would make the Dutch health care system more cost-effective. This type of information may help (1) to identify opportunities for system innovation, (2) to set agendas for further research, and (3) to inform policy decisions about resource allocation. PMID:21840836

Simulation technology - A key to effective man-machine integration for future combat rotorcraft systems

NASA Technical Reports Server (NTRS)

Kerr, Andrew W.

1990-01-01

The utilization of advanced simulation technology in the development of the non-real-time MANPRINT design tools in the Army/NASA Aircrew-Aircraft Integration (A3I) program is described. A description is then given of the Crew Station Research and Development Facilities, the primary tool for the application of MANPRINT principles. The purpose of the A3I program is to develop a rational, predictive methodology for helicopter cockpit system design that integrates human factors engineering with other principles at an early stage in the development process, avoiding the high cost of previous system design methods. Enabling technologies such as the MIDAS work station are examined, and the potential of low-cost parallel-processing systems is indicated.

MEDIAN-BASED INCREMENTAL COST-EFFECTIVENESS RATIOS WITH CENSORED DATA

PubMed Central

Bang, Heejung; Zhao, Hongwei

2016-01-01

Cost-effectiveness is an essential part of treatment evaluation, in addition to effectiveness. In the cost-effectiveness analysis, a measure called the incremental cost-effectiveness ratio (ICER) is widely utilized, and the mean cost and the mean (quality-adjusted) life years have served as norms to summarize cost and effectiveness for a study population. Recently, the median-based ICER was proposed for complementary or sensitivity analysis purposes. In this paper, we extend this method when some data are censored. PMID:26010599

Identification of spider-mite species and their endosymbionts using multiplex PCR.

PubMed

Zélé, Flore; Weill, Mylène; Magalhães, Sara

2018-02-01

Spider mites of the genus Tetranychidae are severe crop pests. In the Mediterranean a few species coexist, but they are difficult to identify based on morphological characters. Additionally, spider mites often harbour several species of endosymbiotic bacteria, which may affect the biology of their hosts. Here, we propose novel, cost-effective, multiplex diagnostic methods allowing a quick identification of spider-mite species as well as of the endosymbionts they carry. First, we developed, and successfully multiplexed in a single PCR, primers to identify Tetranychus urticae, T. evansi and T. ludeni, some of the most common tetranychids found in southwest Europe. Moreover, we demonstrated that this method allows detecting multiple species in a single pool, even at low frequencies (up to 1/100), and can be used on entire mites without DNA extraction. Second, we developed another set of primers to detect spider-mite endosymbionts, namely Wolbachia, Cardinium and Rickettsia in a multiplex PCR, along with a generalist spider-mite primer to control for potential failure of DNA amplification in each PCR. Overall, our method represents a simple, cost-effective and reliable method to identify spider-mite species and their symbionts in natural field populations, as well as to detect contaminations in laboratory rearings. This method may easily be extended to other species.

Method of Evaluating the Life Cycle Cost of Small Earth Dams Considering the Risk of Heavy Rainfall and Selection Method of the Optimum Countermeasure

NASA Astrophysics Data System (ADS)

Hori, Toshikazu; Mohri, Yoshiyuki; Matsushima, Kenichi; Ariyoshi, Mitsuru

In recent years the increase in the number of heavy rainfall occurrences such as through unpredictable cloudbursts have resulted in the safety of the embankments of small earth dams needing to be improved. However, the severe financial condition of the government and local autonomous bodies necessitate the cost of improving them to be reduced. This study concerns the development of a method of evaluating the life cycle cost of small earth dams considered to pose a risk and in order to improve the safety of the downstream areas of small earth dams at minimal cost. Use of a safety evaluation method that is based on a combination of runoff analysis, saturated and unsaturated seepage analysis, and slope stability analysis enables the probability of a dam breach and its life cycle cost with the risk of heavy rainfall taken into account to be calculated. Moreover, use of the life cycle cost evaluation method will lead to the development of a technique for selecting the method of the optimal improvement or countermeasures against heavy rainfall.

Vibroacoustic test plan evaluation: Parameter variation study

NASA Technical Reports Server (NTRS)

Stahle, C. V.; Gongloef, H. R.

1976-01-01

Statistical decision models are shown to provide a viable method of evaluating the cost effectiveness of alternate vibroacoustic test plans and the associated test levels. The methodology developed provides a major step toward the development of a realistic tool to quantitatively tailor test programs to specific payloads. Testing is considered at the no test, component, subassembly, or system level of assembly. Component redundancy and partial loss of flight data are considered. Most and probabilistic costs are considered, and incipient failures resulting from ground tests are treated. Optimums defining both component and assembly test levels are indicated for the modified test plans considered. modeling simplifications must be considered in interpreting the results relative to a particular payload. New parameters introduced were a no test option, flight by flight failure probabilities, and a cost to design components for higher vibration requirements. Parameters varied were the shuttle payload bay internal acoustic environment, the STS launch cost, the component retest/repair cost, and the amount of redundancy in the housekeeping section of the payload reliability model.

From accuracy to patient outcome and cost-effectiveness evaluations of diagnostic tests and biomarkers: an exemplary modelling study

PubMed Central

2013-01-01

Background Proper evaluation of new diagnostic tests is required to reduce overutilization and to limit potential negative health effects and costs related to testing. A decision analytic modelling approach may be worthwhile when a diagnostic randomized controlled trial is not feasible. We demonstrate this by assessing the cost-effectiveness of modified transesophageal echocardiography (TEE) compared with manual palpation for the detection of atherosclerosis in the ascending aorta. Methods Based on a previous diagnostic accuracy study, actual Dutch reimbursement data, and evidence from literature we developed a Markov decision analytic model. Cost-effectiveness of modified TEE was assessed for a life time horizon and a health care perspective. Prevalence rates of atherosclerosis were age-dependent and low as well as high rates were applied. Probabilistic sensitivity analysis was applied. Results The model synthesized all available evidence on the risk of stroke in cardiac surgery patients. The modified TEE strategy consistently resulted in more adapted surgical procedures and, hence, a lower risk of stroke and a slightly higher number of life-years. With 10% prevalence of atherosclerosis the incremental cost-effectiveness ratio was €4,651 and €481 per quality-adjusted life year in 55-year-old men and women, respectively. In all patients aged 65 years or older the modified TEE strategy was cost saving and resulted in additional health benefits. Conclusions Decision analytic modelling to assess the cost-effectiveness of a new diagnostic test based on characteristics, costs and effects of the test itself and of the subsequent treatment options is both feasible and valuable. Our case study on modified TEE suggests that it may reduce the risk of stroke in cardiac surgery patients older than 55 years at acceptable cost-effectiveness levels. PMID:23368927

Cost-effectiveness of prucalopride in the treatment of chronic constipation in the Netherlands

PubMed Central

Nuijten, Mark J. C.; Dubois, Dominique J.; Joseph, Alain; Annemans, Lieven

2015-01-01

Objective: To assess the cost-effectiveness of prucalopride vs. continued laxative treatment for chronic constipation in patients in the Netherlands in whom laxatives have failed to provide adequate relief. Methods: A Markov model was developed to estimate the cost-effectiveness of prucalopride in patients with chronic constipation receiving standard laxative treatment from the perspective of Dutch payers in 2011. Data sources included published prucalopride clinical trials, published Dutch price/tariff lists, and national population statistics. The model simulated the clinical and economic outcomes associated with prucalopride vs. standard treatment and had a cycle length of 1 month and a follow-up time of 1 year. Response to treatment was defined as the proportion of patients who achieved “normal bowel function”. One-way and probabilistic sensitivity analyses were conducted to test the robustness of the base case. Results: In the base case analysis, the cost of prucalopride relative to continued laxative treatment was € 9015 per quality-adjusted life-year (QALY). Extensive sensitivity analyses and scenario analyses confirmed that the base case cost-effectiveness estimate was robust. One-way sensitivity analyses showed that the model was most sensitive in response to prucalopride; incremental cost-effectiveness ratios ranged from € 6475 to 15,380 per QALY. Probabilistic sensitivity analyses indicated that there is a greater than 80% probability that prucalopride would be cost-effective compared with continued standard treatment, assuming a willingness-to-pay threshold of € 20,000 per QALY from a Dutch societal perspective. A scenario analysis was performed for women only, which resulted in a cost-effectiveness ratio of € 7773 per QALY. Conclusion: Prucalopride was cost-effective in a Dutch patient population, as well as in a women-only subgroup, who had chronic constipation and who obtained inadequate relief from laxatives. PMID:25926794

Mobilizing Rural Community Resources for Support and Development of Local Learning Systems in Developing Countries.

ERIC Educational Resources Information Center

O'Grady, Barbara, Ed.; Levenson, Ruth, Ed.

Focusing on how local village communities in developing countries might support part or all of their educational costs, this study describes methods used by developing countries to reduce education costs and offers a model incorporating several of the most successful components of such projects. First is a discussion of methods used by governments…