A New Model for Solving Time-Cost-Quality Trade-Off Problems in Construction

PubMed Central

Fu, Fang; Zhang, Tao

2016-01-01

A poor quality affects project makespan and its total costs negatively, but it can be recovered by repair works during construction. We construct a new non-linear programming model based on the classic multi-mode resource constrained project scheduling problem considering repair works. In order to obtain satisfactory quality without a high increase of project cost, the objective is to minimize total quality cost which consists of the prevention cost and failure cost according to Quality-Cost Analysis. A binary dependent normal distribution function is adopted to describe the activity quality; Cumulative quality is defined to determine whether to initiate repair works, according to the different relationships among activity qualities, namely, the coordinative and precedence relationship. Furthermore, a shuffled frog-leaping algorithm is developed to solve this discrete trade-off problem based on an adaptive serial schedule generation scheme and adjusted activity list. In the program of the algorithm, the frog-leaping progress combines the crossover operator of genetic algorithm and a permutation-based local search. Finally, an example of a construction project for a framed railway overpass is provided to examine the algorithm performance, and it assist in decision making to search for the appropriate makespan and quality threshold with minimal cost. PMID:27911939

Recent developments in high efficient freeze-drying of fruits and vegetables assisted by microwave: A review.

PubMed

Fan, Kai; Zhang, Min; Mujumdar, Arun S

2018-01-10

Microwave heating has been applied in the drying of high-value solids as it affords a number of advantages, including shorter drying time and better product quality. Freeze-drying at cryogenic temperature and extremely low pressure provides the advantage of high product quality, but at very high capital and operating costs due partly to very long drying time. Freeze-drying coupled with a microwave heat source speeds up the drying rate and yields good quality products provided the operating unit is designed and operated to achieve the potential for an absence of hot spot developments. This review is a survey of recent developments in the modeling and experimental results on microwave-assisted freeze-drying (MFD) over the past decade. Owing to the high costs involved, so far all applications are limited to small-scale operations for the drying of high-value foods such as fruits and vegetables. In order to promote industrial-scale applications for a broader range of products further research and development efforts are needed to offset the current limitations of the process. The needs and opportunities for future research and developments are outlined.

Introducing nonpoint source transferable quotas in nitrogen trading: The effects of transaction costs and uncertainty.

PubMed

Zhou, Xiuru; Ye, Weili; Zhang, Bing

2016-03-01

Transaction costs and uncertainty are considered to be significant obstacles in the emissions trading market, especially for including nonpoint source in water quality trading. This study develops a nonlinear programming model to simulate how uncertainty and transaction costs affect the performance of point/nonpoint source (PS/NPS) water quality trading in the Lake Tai watershed, China. The results demonstrate that PS/NPS water quality trading is a highly cost-effective instrument for emissions abatement in the Lake Tai watershed, which can save 89.33% on pollution abatement costs compared to trading only between nonpoint sources. However, uncertainty can significantly reduce the cost-effectiveness by reducing trading volume. In addition, transaction costs from bargaining and decision making raise total pollution abatement costs directly and cause the offset system to deviate from the optimal state. While proper investment in monitoring and measuring of nonpoint emissions can decrease uncertainty and save on the total abatement costs. Finally, we show that the dispersed ownership of China's farmland will bring high uncertainty and transaction costs into the PS/NPS offset system, even if the pollution abatement cost is lower than for point sources. Copyright © 2015 Elsevier Ltd. All rights reserved.

Preface to QoIS 2009

NASA Astrophysics Data System (ADS)

Comyn-Wattiau, Isabelle; Thalheim, Bernhard

Quality assurance is a growing research domain within the Information Systems (IS) and Conceptual Modeling (CM) disciplines. Ongoing research on quality in IS and CM is highly diverse and encompasses theoretical aspects including quality definition and quality models, and practical/empirical aspects such as the development of methods, approaches and tools for quality measurement and improvement. Current research on quality also includes quality characteristics definitions, validation instruments, methodological and development approaches to quality assurance during software and information systems development, quality monitors, quality assurance during information systems development processes and practices, quality assurance both for data and (meta)schemata, quality support for information systems data import and export, quality of query answering, and cost/benefit analysis of quality assurance processes. Quality assurance is also depending on the application area and the specific requirements in applications such as health sector, logistics, public sector, financial sector, manufacturing, services, e-commerce, software, etc. Furthermore, quality assurance must also be supported for data aggregation, ETL processes, web content management and other multi-layered applications. Quality assurance is typically requiring resources and has therefore beside its benefits a computational and economical trade-off. It is therefore also based on compromising between the value of quality data and the cost for quality assurance.

Modular Laboratories—Cost-Effective and Sustainable Infrastructure for Resource-Limited Settings

PubMed Central

Bridges, Daniel J.; Colborn, James; Chan, Adeline S. T.; Winters, Anna M.; Dengala, Dereje; Fornadel, Christen M.; Kosloff, Barry

2014-01-01

High-quality laboratory space to support basic science, clinical research projects, or health services is often severely lacking in the developing world. Moreover, the construction of suitable facilities using traditional methods is time-consuming, expensive, and challenging to implement. Three real world examples showing how shipping containers can be converted into modern laboratories are highlighted. These include use as an insectary, a molecular laboratory, and a BSL-3 containment laboratory. These modular conversions have a number of advantages over brick and mortar construction and provide a cost-effective and timely solution to offer high-quality, user-friendly laboratory space applicable within the developing world. PMID:25223943

Switching benefits and costs in competitive health insurance markets: A conceptual framework and empirical evidence from the Netherlands.

PubMed

Duijmelinck, Daniëlle M I D; Mosca, Ilaria; van de Ven, Wynand P M M

2015-05-01

Competitive health insurance markets will only enhance cost-containment, efficiency, quality, and consumer responsiveness if all consumers feel free to easily switch insurer. Consumers will switch insurer if their perceived switching benefits outweigh their perceived switching costs. We developed a conceptual framework with potential switching benefits and costs in competitive health insurance markets. Moreover, we used a questionnaire among Dutch consumers (1091 respondents) to empirically examine the relevance of the different switching benefits and costs in consumers' decision to (not) switch insurer. Price, insurers' service quality, insurers' contracted provider network, the benefits of supplementary insurance, and welcome gifts are potential switching benefits. Transaction costs, learning costs, 'benefit loss' costs, uncertainty costs, the costs of (not) switching provider, and sunk costs are potential switching costs. In 2013 most Dutch consumers switched insurer because of (1) price and (2) benefits of supplementary insurance. Nearly half of the non-switchers - and particularly unhealthy consumers - mentioned one of the switching costs as their main reason for not switching. Because unhealthy consumers feel not free to easily switch insurer, insurers have reduced incentives to invest in high-quality care for them. Therefore, policymakers should develop strategies to increase consumer choice. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Elements of Effective E-Learning Design

ERIC Educational Resources Information Center

Brown, Andrew R.; Voltz, Bradley D.

2005-01-01

Preparing and developing e-learning materials is a costly and time consuming enterprise. This paper highlights the elements of effective design that we consider assist in the development of high quality materials in a cost efficient way. We introduce six elements of design and discuss each in some detail. These elements focus on paying attention…

A cost-efficiency and health benefit approach to improve urban air quality.

PubMed

Miranda, A I; Ferreira, J; Silveira, C; Relvas, H; Duque, L; Roebeling, P; Lopes, M; Costa, S; Monteiro, A; Gama, C; Sá, E; Borrego, C; Teixeira, J P

2016-11-01

When ambient air quality standards established in the EU Directive 2008/50/EC are exceeded, Member States are obliged to develop and implement Air Quality Plans (AQP) to improve air quality and health. Notwithstanding the achievements in emission reductions and air quality improvement, additional efforts need to be undertaken to improve air quality in a sustainable way - i.e. through a cost-efficiency approach. This work was developed in the scope of the recently concluded MAPLIA project "Moving from Air Pollution to Local Integrated Assessment", and focuses on the definition and assessment of emission abatement measures and their associated costs, air quality and health impacts and benefits by means of air quality modelling tools, health impact functions and cost-efficiency analysis. The MAPLIA system was applied to the Grande Porto urban area (Portugal), addressing PM10 and NOx as the most important pollutants in the region. Four different measures to reduce PM10 and NOx emissions were defined and characterized in terms of emissions and implementation costs, and combined into 15 emission scenarios, simulated by the TAPM air quality modelling tool. Air pollutant concentration fields were then used to estimate health benefits in terms of avoided costs (external costs), using dose-response health impact functions. Results revealed that, among the 15 scenarios analysed, the scenario including all 4 measures lead to a total net benefit of 0.3M€·y(-1). The largest net benefit is obtained for the scenario considering the conversion of 50% of open fire places into heat recovery wood stoves. Although the implementation costs of this measure are high, the benefits outweigh the costs. Research outcomes confirm that the MAPLIA system is useful for policy decision support on air quality improvement strategies, and could be applied to other urban areas where AQP need to be implemented and monitored. Copyright © 2016. Published by Elsevier B.V.

Bundled Payments in Total Joint Replacement: Keeping Our Care Affordable and High in Quality.

PubMed

McLawhorn, Alexander S; Buller, Leonard T

2017-09-01

The purpose of this review was to evaluate the literature regarding bundle payment reimbursement models for total joint arthroplasty (TJA). From an economic standpoint, TJA are cost-effective, but they represent a substantial expense to the Centers for Medicare & Medicaid Services (CMS). Historically, fee-for-service payment models resulted in highly variable cost and quality. CMS introduced Bundled Payments for Care Improvement (BPCI) in 2012 and subsequently the Comprehensive Care for Joint Replacement (CJR) reimbursement model in 2016 to improve the value of TJA from the perspectives of both CMS and patients, by improving quality via cost control. Early results of bundled payments are promising, but preserving access to care for patients with high comorbidity burdens and those requiring more complex care is a lingering concern. Hospitals, regardless of current participation in bundled payments, should develop care pathways for TJA to maximize efficiency and patient safety.

Managing orthopedics and neurosciences costs through standard treatment protocols.

PubMed

McGinnity, E S; Pluth, T E

1994-06-01

High-cost, high-volume specialty programs such as orthopedics and neurosciences find themselves in a position of evaluating the costs and in some cases the appropriateness of medical practices in response to payer scrutiny and provider selection processes. Orthopedics and neurosciences programs are at a stage of development analogous to that of cardiovascular care several years ago. Many of the same trends have come into play, such as payer "carve-outs" for orthopedic services, payer selection of centers of excellence based on cost and quality, reduction of Medicare reimbursement, greater use of high-cost technology, the decline of profitability due to "older, sicker, and tougher" patients, and the recent emergence of national orthopedic specialty networks oriented to national contracts for care. In an era in which payers demand value on both sides of the cost-plus-quality equation, programs are challenged to maximize the return on a patient population rife with "no-win" situations. In the orthopedic service line these include a high proportion of Medicare patients and chronic conditions such as workers' compensation medical back cases or repetitive motion injuries, which can be elusive to diagnose and expensive to treat. Many hospitals continue to lose money on joint replacement surgeries, the largest-volume orthopedic inpatient service, primarily because of the high Medicare population and the cost of implants. Neuroservices, while still relatively well reimbursed, face a rising proportion of Medicare payments as patients live longer and develop chronic, degenerative conditions. Inpatient days are decreasing due to payer pressures to limit hospital stays and to shift inpatient care to outpatient services. Some hospitals "have lost interest in (the orthopedic) service line during the last five years because of recent trends in orthopedic-related inpatient volume and payment." But by managing costs strategically, both the neurosciences and orthopedics service lines can provide substantial revenue as well as the opportunity to achieve a "center of excellence" competitive position in a managed care environment. This Special Report outlines the process and advantages of managing costs and quality of care strategically, that is, in a manner which helps these programs meet internal cost and clinical goals while responding to market situations. The hospital, physicians, and patients all benefit as costs are reduced, quality is enhanced, and the service line's competitive position is strengthened.

Low-Cost, High-Throughput Sequencing of DNA Assemblies Using a Highly Multiplexed Nextera Process.

PubMed

Shapland, Elaine B; Holmes, Victor; Reeves, Christopher D; Sorokin, Elena; Durot, Maxime; Platt, Darren; Allen, Christopher; Dean, Jed; Serber, Zach; Newman, Jack; Chandran, Sunil

2015-07-17

In recent years, next-generation sequencing (NGS) technology has greatly reduced the cost of sequencing whole genomes, whereas the cost of sequence verification of plasmids via Sanger sequencing has remained high. Consequently, industrial-scale strain engineers either limit the number of designs or take short cuts in quality control. Here, we show that over 4000 plasmids can be completely sequenced in one Illumina MiSeq run for less than $3 each (15× coverage), which is a 20-fold reduction over using Sanger sequencing (2× coverage). We reduced the volume of the Nextera tagmentation reaction by 100-fold and developed an automated workflow to prepare thousands of samples for sequencing. We also developed software to track the samples and associated sequence data and to rapidly identify correctly assembled constructs having the fewest defects. As DNA synthesis and assembly become a centralized commodity, this NGS quality control (QC) process will be essential to groups operating high-throughput pipelines for DNA construction.

The CRAC cohort model: A computerized low cost registry of interventional cardiology with daily update and long-term follow-up.

PubMed

Rangé, G; Chassaing, S; Marcollet, P; Saint-Étienne, C; Dequenne, P; Goralski, M; Bardiére, P; Beverilli, F; Godillon, L; Sabine, B; Laure, C; Gautier, S; Hakim, R; Albert, F; Angoulvant, D; Grammatico-Guillon, L

2018-05-01

To assess the reliability and low cost of a computerized interventional cardiology (IC) registry to prospectively and systematically collect high-quality data for all consecutive coronary patients referred for coronary angiogram or/and coronary angioplasty. Rigorous clinical practice assessment is a key factor to improve prognosis in IC. A prospective and permanent registry could achieve this goal but, presumably, at high cost and low level of data quality. One multicentric IC registry (CRAC registry), fully integrated to usual coronary activity report software, started in the centre Val-de-Loire (CVL) French region in 2014. Quality assessment of CRAC registry was conducted on five IC CathLab of the CVL region, from January 1st to December 31st 2014. Quality of collected data was evaluated by measuring procedure exhaustivity (comparing with data from hospital information system), data completeness (quality controls) and data consistency (by checking complete medical charts as gold standard). Cost per procedure (global registry operating cost/number of collected procedures) was also estimated. CRAC model provided a high-quality level with 98.2% procedure completeness, 99.6% data completeness and 89% data consistency. The operating cost per procedure was €14.70 ($16.51) for data collection and quality control, including ST-segment elevation myocardial infarction (STEMI) preadmission information and one-year follow-up after angioplasty. This integrated computerized IC registry led to the construction of an exhaustive, reliable and costless database, including all coronary patients entering in participating IC centers in the CVL region. This solution will be developed in other French regions, setting up a national IC database for coronary patients in 2020: France PCI. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Organizational management practices for achieving software process improvement

NASA Technical Reports Server (NTRS)

Kandt, Ronald Kirk

2004-01-01

The crisis in developing software has been known for over thirty years. Problems that existed in developing software in the early days of computing still exist today. These problems include the delivery of low-quality products, actual development costs that exceed expected development costs, and actual development time that exceeds expected development time. Several solutions have been offered to overcome out inability to deliver high-quality software, on-time and within budget. One of these solutions involves software process improvement. However, such efforts often fail because of organizational management issues. This paper discusses business practices that organizations should follow to improve their chances of initiating and sustaining successful software process improvement efforts.

Diversity, Child Care Quality and Developmental Outcomes. FPG Snapshot, #21

ERIC Educational Resources Information Center

FPG Child Development Institute, University of North Carolina, 2004

2004-01-01

It is widely accepted that high quality child care enhances children's cognitive and social development, but some people question if what constitutes quality care depends on the child's ethnic and cultural background. To examine this issue, secondary analysis of the two largest U.S. studies of child care--the Cost, Quality, and Outcomes Study and…

[Threshold value for reimbursement of costs of new drugs: cost-effectiveness research and modelling are essential links].

PubMed

Frederix, Geert W J; Hövels, Anke M; Severens, Johan L; Raaijmakers, Jan A M; Schellens, Jan H M

2015-01-01

There is increasing discussion in the Netherlands about the introduction of a threshold value for the costs per extra year of life when reimbursing costs of new drugs. The Medicines Committee ('Commissie Geneesmiddelen'), a division of the Netherlands National Healthcare Institute ('Zorginstituut Nederland'), advises on reimbursement of costs of new drugs. This advice is based upon the determination of therapeutic value of the drug and the results of economic evaluations. Mathematical models that predict future costs and effectiveness are often used in economic evaluations; these models can vary greatly in transparency and quality due to author assumptions. Standardisation of cost-effectiveness models is one solution to overcome the unwanted variation in quality. Discussions about the introduction of a threshold value can only be meaningful if all involved are adequately informed, and by high quality in cost-effectiveness research and, particularly, economic evaluations. Collaboration and discussion between medical specialists, patients or patient organisations, health economists and policy makers, both in development of methods and in standardisation, are essential to improve the quality of decision making.

Highly Integrated Quality Assurance – An Empirical Case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drake Kirkham; Amy Powell; Lucas Rich

2011-02-01

Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission,more » the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.« less

Modular laboratories--cost-effective and sustainable infrastructure for resource-limited settings.

PubMed

Bridges, Daniel J; Colborn, James; Chan, Adeline S T; Winters, Anna M; Dengala, Dereje; Fornadel, Christen M; Kosloff, Barry

2014-12-01

High-quality laboratory space to support basic science, clinical research projects, or health services is often severely lacking in the developing world. Moreover, the construction of suitable facilities using traditional methods is time-consuming, expensive, and challenging to implement. Three real world examples showing how shipping containers can be converted into modern laboratories are highlighted. These include use as an insectary, a molecular laboratory, and a BSL-3 containment laboratory. These modular conversions have a number of advantages over brick and mortar construction and provide a cost-effective and timely solution to offer high-quality, user-friendly laboratory space applicable within the developing world. © The American Society of Tropical Medicine and Hygiene.

Defining quality health care with outcomes assessment while achieving economic value.

PubMed

Shaw, L J; Miller, D D

2000-02-01

The effectiveness of a procedure is increasingly guided by the evaluation of patient outcomes. Outcomes data is used to develop clinical pathways of care and to define appropriate resource-use levels without sacrificing quality of care. Integration of the economic implications of medical services into an outcome-based guideline allows for the development of disease-management strategies. In cardiovascular medicine, risk reduction is associated with high cost due to the "pay-back" of new technologies and therapies. A major challenge is to define a balance between "high tech" care and cost. This paper devises an outpatient evidence-based guideline using clinical and economic outcomes data for the diagnosis of coronary disease.

Cost-effectiveness of dabigatran for stroke prophylaxis in atrial fibrillation.

PubMed

Shah, Shimoli V; Gage, Brian F

2011-06-07

Recent studies have investigated alternatives to warfarin for stroke prophylaxis in patients with atrial fibrillation (AF), but whether these alternatives are cost-effective is unknown. On the basis of the results from Randomized Evaluation of Long Term Anticoagulation Therapy (RE-LY) and other trials, we developed a decision-analysis model to compare the cost and quality-adjusted survival of various antithrombotic therapies. We ran our Markov model in a hypothetical cohort of 70-year-old patients with AF using a cost-effectiveness threshold of $50 000/quality-adjusted life-year. We estimated the cost of dabigatran as US $9 a day. For a patient with an average risk of major hemorrhage (≈3%/y), the most cost-effective therapy depended on stroke risk. For patients with the lowest stroke rate (CHADS2 stroke score of 0), only aspirin was cost-effective. For patients with a moderate stroke rate (CHADS2 score of 1 or 2), warfarin was cost-effective unless the risk of hemorrhage was high or quality of international normalized ratio control was poor (time in the therapeutic range <57.1%). For patients with a high stroke risk (CHADS(2) stroke score ≥3), dabigatran 150 mg (twice daily) was cost-effective unless international normalized ratio control was excellent (time in the therapeutic range >72.6%). Neither dabigatran 110 mg nor dual therapy (aspirin and clopidogrel) was cost-effective. Dabigatran 150 mg (twice daily) was cost-effective in AF populations at high risk of hemorrhage or high risk of stroke unless international normalized ratio control with warfarin was excellent. Warfarin was cost-effective in moderate-risk AF populations unless international normalized ratio control was poor.

Evaluation of Methods for de novo Genome assembly from High-throughput Sequencing Reads Reveals Dependencies that Affect the Quality of the Results

USDA-ARS?s Scientific Manuscript database

Recent developments in high-throughput sequencing technology have made low-cost sequencing an attractive approach for many genome analysis tasks. Increasing read lengths, improving quality and the production of increasingly larger numbers of usable sequences per instrument-run continue to make whole...

Taguchi Approach to Design Optimization for Quality and Cost: An Overview

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.

1990-01-01

Calibrations to existing cost of doing business in space indicate that to establish human presence on the Moon and Mars with the Space Exploration Initiative (SEI) will require resources, felt by many, to be more than the national budget can afford. In order for SEI to succeed, we must actually design and build space systems at lower cost this time, even with tremendous increases in quality and performance requirements, such as extremely high reliability. This implies that both government and industry must change the way they do business. Therefore, new philosophy and technology must be employed to design and produce reliable, high quality space systems at low cost. In recognizing the need to reduce cost and improve quality and productivity, Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) have initiated Total Quality Management (TQM). TQM is a revolutionary management strategy in quality assurance and cost reduction. TQM requires complete management commitment, employee involvement, and use of statistical tools. The quality engineering methods of Dr. Taguchi, employing design of experiments (DOE), is one of the most important statistical tools of TQM for designing high quality systems at reduced cost. Taguchi methods provide an efficient and systematic way to optimize designs for performance, quality, and cost. Taguchi methods have been used successfully in Japan and the United States in designing reliable, high quality products at low cost in such areas as automobiles and consumer electronics. However, these methods are just beginning to see application in the aerospace industry. The purpose of this paper is to present an overview of the Taguchi methods for improving quality and reducing cost, describe the current state of applications and its role in identifying cost sensitive design parameters.

A quality-based cost model for new electronic systems and products

NASA Astrophysics Data System (ADS)

Shina, Sammy G.; Saigal, Anil

1998-04-01

This article outlines a method for developing a quality-based cost model for the design of new electronic systems and products. The model incorporates a methodology for determining a cost-effective design margin allocation for electronic products and systems and its impact on manufacturing quality and cost. A spreadsheet-based cost estimating tool was developed to help implement this methodology in order for the system design engineers to quickly estimate the effect of design decisions and tradeoffs on the quality and cost of new products. The tool was developed with automatic spreadsheet connectivity to current process capability and with provisions to consider the impact of capital equipment and tooling purchases to reduce the product cost.

In pursuit of high-value healthcare: the case for improving quality and achieving equity in a time of healthcare transformation.

PubMed

Betancourt, Joseph R

2014-01-01

The passage of the Patient Protection and Affordable Care Act and current efforts in payment reform signal the beginning of a significant transformation for the US healthcare system. As we embark on this transformation, disparities have emerged as the hallmark of low-value healthcare--care that does not meet quality standards, is inefficient, and is usually of high cost. A new set of structures is being developed to facilitate increased access to care that is cost-effective and high in quality--otherwise known as high-value healthcare. Addressing disparities and achieving equity are the perfect target areas for recouping value, and doing so will pave the way for high-value healthcare. As healthcare leaders make difficult choices, they should consider the realities of healthcare equity. First, racial and ethnic disparities in healthcare persist and are a clear sign of poor-quality, low-value healthcare. Second, the root causes of these disparities are complex, but a well-developed set of evidence-based approaches is available to help leaders address healthcare inequity. Third, evidence suggests that being inattentive to the root causes of disparities adversely affects efficiency and an organization's bottom line. Finally, if healthcare organizations are progressive, thoughtful, and prepared for success in such an environment, a new healthcare system that offers accessible, high-value, equitable, culturally competent, and high-quality care to all is well within reach.

Searching for a business case for quality in Medicaid managed care.

PubMed

Greene, Sandra B; Reiter, Kristin L; Kilpatrick, Kerry E; Leatherman, Sheila; Somers, Stephen A; Hamblin, Allison

2008-01-01

Despite the prevalence of evidence-based interventions to improve quality in health care systems, there is a paucity of documented evidence of a financial return on investment (ROI) for these interventions from the perspective of the investing entity. To report on a demonstration project designed to measure the business case for selected quality interventions in high-risk high-cost patient populations in 10 Medicaid managed care organizations across the United States. Using claims and enrollment data gathered over a 3-year period and data on the costs of designing, implementing, and operating the interventions, ROIs were computed for 11 discrete evidence-based quality-enhancing interventions. A complex case management program to treat adults with multiple comorbidities achieved the largest ROI of 12.21:1. This was followed by an ROI of 6.35:1 for a program which treated children with asthma with a history of high emergency room (ER) use and/or inpatient admissions for their disease. An intervention for high-risk pregnant mothers produced a 1.26:1 ROI, and a program for adult patients with diabetes resulted in a 1.16:1 return. The remaining seven interventions failed to show positive returns, although four sites came close to realizing sufficient savings to offset investment costs. Evidence-based interventions designed to improve the quality of patient care may have the best opportunity to yield a positive financial return if it is focused on high-risk high-cost populations and conditions associated with avoidable emergency and inpatient utilization. Developing the necessary tracking systems for the claims and financial investments is critical to perform accurate financial ROI analyses.

A simple fabrication of CH3NH3PbI3 perovskite for solar cells using low-purity PbI2

NASA Astrophysics Data System (ADS)

Guo, Nanjie; Zhang, Taiyang; Li, Ge; Xu, Feng; Qian, Xufang; Zhao, Yixin

2017-01-01

The CH3NH3PbI3 (MAPbI3) perovskite was usually prepared by high-purity PbI2 with high cost. The low cost and low-purity PbI2 was seldom reported for fabrication of MAPbI3 because it cannot even dissolve well in widely adopted solvent of DMF. We developed an easy method to adapt low-purity PbI2 for fabrication of high quality MAPbI3 just by the simple addition of some hydrochloric acid into the mixture of low-purity PbI2, MAI and DMF. This straightforward method can not only help dissolve the low quality PbI2 by reacting with some impurities in DMF, but also lead to a successful fabrication of high-quality perovskite solar cells with up to 14.80% efficiency comparable to the high quality PbI2 precursors. Project supported by the National Natural Science Foundation of China (Nos. 51372151, 21303103) and Houyingdong Grant (No. 151046).

An experiment shows that a well-designed report on costs and quality can help consumers choose high-value health care.

PubMed

Hibbard, Judith H; Greene, Jessica; Sofaer, Shoshanna; Firminger, Kirsten; Hirsh, Judith

2012-03-01

Advocates of health reform continue to pursue policies and tools that will make information about comparative costs and resource use available to consumers. Reformers expect that consumers will use the data to choose high-value providers-those who offer higher quality and lower prices-and thus contribute to the broader goal of controlling national health care spending. However, communicating this information effectively is more challenging than it might first appear. For example, consumers are more interested in the quality of health care than in its cost, and many perceive a low-cost provider to be substandard. In this study of 1,421 employees, we examined how different presentations of information affect the likelihood that consumers will make high-value choices. We found that a substantial minority of the respondents shied away from low-cost providers, and even consumers who pay a larger share of their health care costs themselves were likely to equate high cost with high quality. At the same time, we found that presenting cost data alongside easy-to-interpret quality information and highlighting high-value options improved the likelihood that consumers would choose those options. Reporting strategies that follow such a format will help consumers understand that a doctor who provides higher-quality care than other doctors does not necessarily cost more.

Anaerobic digestion of municipal solid waste: Technical developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivard, C.J.

1996-01-01

The anaerobic biogasification of organic wastes generates two useful products: a medium-Btu fuel gas and a compost-quality organic residue. Although commercial-scale digestion systems are used to treat municipal sewage wastes, the disposal of solid organic wastes, including municipal solid wastes (MSW), requires a more cost-efficient process. Modern biogasification systems employ high-rate, high-solids fermentation methods to improve process efficiency and reduce capital costs. The design criteria and development stages are discussed. These systems are also compared with conventional low-solids fermentation technology.

The Future of Home Health project: developing the framework for health care at home.

PubMed

Lee, Teresa; Schiller, Jennifer

2015-02-01

In addition to providing high-quality care to vulnerable patient populations, home healthcare offers the least costly option for patients and the healthcare system, particularly in postacute care. As the baby boom generation ages, policymakers are expressing concerns about rising costs, variation in home healthcare service use, and program integrity. The Alliance for Home Health Quality and Innovation seeks to develop a research-based strategic framework for the future of home healthcare for older Americans and those with disabilities. This article describes the initiative and invites readers to provide comments and suggestions.

Reduced cost and improved figure of sapphire optical components

NASA Astrophysics Data System (ADS)

Walters, Mark; Bartlett, Kevin; Brophy, Matthew R.; DeGroote Nelson, Jessica; Medicus, Kate

2015-10-01

Sapphire presents many challenges to optical manufacturers due to its high hardness and anisotropic properties. Long lead times and high prices are the typical result of such challenges. The cost of even a simple 'grind and shine' process can be prohibitive. The high precision surfaces required by optical sensor applications further exacerbate the challenge of processing sapphire thereby increasing cost further. Optimax has demonstrated a production process for such windows that delivers over 50% time reduction as compared to traditional manufacturing processes for sapphire, while producing windows with less than 1/5 wave rms figure error. Optimax's sapphire production process achieves significant improvement in cost by implementation of a controlled grinding process to present the best possible surface to the polishing equipment. Following the grinding process is a polishing process taking advantage of chemical interactions between slurry and substrate to deliver excellent removal rates and surface finish. Through experiments, the mechanics of the polishing process were also optimized to produce excellent optical figure. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. In addition to reducing the cost of producing large sapphire sensor windows, the grinding and polishing technology Optimax has developed aids in producing spherical sapphire components to better figure quality. Through specially developed polishing slurries, the peak-to-valley figure error of spherical sapphire parts is reduced by over 80%.

Drug prescribing in rural health facilities in China: implications for service quality and cost.

PubMed

Zhan, S K; Tang, S L; Guo, Y D; Bloom, G

1998-01-01

Overuse of drugs in rural areas of China has led to a growing concern regarding service quality and cost. The study found evidence of high levels of drug use in some rural health facilities in comparison with a number of other developing countries. Such a result was significantly associated with the government policy of financing health care, regulation and monitoring of health services, and users' attitudes and behaviour. It underlines the need for measures to be taken in China to improve drug use in order to allow its population access to effective care at reasonable cost.

Cost-effectiveness of botulinum toxin a versus anticholinergic medications for idiopathic urge incontinence.

PubMed

Wu, Jennifer M; Siddiqui, Nazema Y; Amundsen, Cindy L; Myers, Evan R; Havrilesky, Laura J; Visco, Anthony G

2009-05-01

We assessed the cost-effectiveness of botulinum toxin A injection compared to anticholinergic medications for the treatment of idiopathic urge incontinence. A Markov decision analysis model was developed to compare the costs in 2008 U. S. dollars and effectiveness in quality adjusted life-years of botulinum toxin A injection and anticholinergic medications. The analysis was conducted from a societal perspective with a 2-year time frame using 3-month cycles. The primary outcome was the incremental cost-effectiveness ratio, defined as the difference in cost (botulinum toxin A cost--anticholinergic cost) divided by the difference in effectiveness (botulinum toxin A quality adjusted life-years--anticholinergic quality adjusted life-years). While the botulinum strategy was more expensive ($4,392 vs $2,563) it was also more effective (1.63 vs 1.50 quality adjusted life-years) compared to the anticholinergic regimen. The calculated incremental cost-effectiveness ratio was $14,377 per quality adjusted life-year, meaning that botulinum toxin A cost $14,377 per quality adjusted life-year gained. A strategy is often considered cost-effective when the incremental cost-effectiveness ratio is less than $50,000 per quality adjusted life-year. Given this definition botulinum toxin A is cost-effective compared to anticholinergics. To determine if there are situations in which anticholinergics would become cost-effective we performed sensitivity analyses. Anticholinergics become cost-effective if compliance exceeds 75% (33% in the base case) and if the botulinum toxin A procedure cost exceeds $3,875 ($1,690 in the base case). For the remainder of the sensitivity analyses botulinum toxin A remained cost-effective. Botulinum toxin A injection was cost-effective compared to anticholinergic medications for the treatment of refractory urge incontinence. Anticholinergics become cost-effective if patients are highly compliant with medications or if the botulinum procedure costs increase substantially.

Product development cycle time reduction

NASA Astrophysics Data System (ADS)

Farran, Robin

1992-05-01

We are facing here today the key issues that face us in the competitive environment. North American companies are struggling to compete in the global marketplace. Gone are the days when presence ensured success. Then, sales and earnings were guaranteed. Today the competition is intense. Many manufacturing and service companies are no longer competitive. Traditionally, manufacturing companies have created the most wealth for the community and economy. Losing this ability to create wealth is tragic and unnecessary. A company can only be successful by focusing on customer satisfaction at competitive costs. Revenue growth and earnings growth require a continuous stream of products that anticipate the customers' needs, result from shorter and shorter innovation cycles, continually improve in quality, and are produced at improved costs on each cycle. The best opportunities for increased quality and decreased costs are with new products. Sure, work on quality and costs everyday. The biggest changes, however, will come through the new product development cycle. We must improve our development processes to provide leadership products which result in high levels of customer satisfaction. This is a prerequisite for business success. When presence in the marketplace was a virtual guarantee of success for a North American company, technology tended to drive the products, and the customers bought virtually everything that was produced. Functional excellence was stressed within companies ... and that was enough. Effective planning processes were not a prerequisite for success. Today success demands highly developed business research and planning processes, and functional excellence combined with organizational capabilities that ensure commercialization excellence.

A measurement system for large, complex software programs

NASA Technical Reports Server (NTRS)

Rone, Kyle Y.; Olson, Kitty M.; Davis, Nathan E.

1994-01-01

This paper describes measurement systems required to forecast, measure, and control activities for large, complex software development and support programs. Initial software cost and quality analysis provides the foundation for meaningful management decisions as a project evolves. In modeling the cost and quality of software systems, the relationship between the functionality, quality, cost, and schedule of the product must be considered. This explicit relationship is dictated by the criticality of the software being developed. This balance between cost and quality is a viable software engineering trade-off throughout the life cycle. Therefore, the ability to accurately estimate the cost and quality of software systems is essential to providing reliable software on time and within budget. Software cost models relate the product error rate to the percent of the project labor that is required for independent verification and validation. The criticality of the software determines which cost model is used to estimate the labor required to develop the software. Software quality models yield an expected error discovery rate based on the software size, criticality, software development environment, and the level of competence of the project and developers with respect to the processes being employed.

Continuous processing and the applications of online tools in pharmaceutical product manufacture: developments and examples.

PubMed

Ooi, Shing Ming; Sarkar, Srimanta; van Varenbergh, Griet; Schoeters, Kris; Heng, Paul Wan Sia

2013-04-01

Continuous processing and production in pharmaceutical manufacturing has received increased attention in recent years mainly due to the industries' pressing needs for more efficient, cost-effective processes and production, as well as regulatory facilitation. To achieve optimum product quality, the traditional trial-and-error method for the optimization of different process and formulation parameters is expensive and time consuming. Real-time evaluation and the control of product quality using an online process analyzer in continuous processing can provide high-quality production with very high-throughput at low unit cost. This review focuses on continuous processing and the application of different real-time monitoring tools used in the pharmaceutical industry for continuous processing from powder to tablets.

Analyses of Blood Bank Efficiency, Cost-Effectiveness and Quality

NASA Astrophysics Data System (ADS)

Lam, Hwai-Tai Chen

In view of the increasing costs of hospital care, it is essential to investigate methods to improve the labor efficiency and the cost-effectiveness of the hospital technical core in order to control costs while maintaining the quality of care. This study was conducted to develop indices to measure efficiency, cost-effectiveness, and the quality of blood banks; to identify factors associated with efficiency, cost-effectiveness, and quality; and to generate strategies to improve blood bank labor efficiency and cost-effectiveness. Indices developed in this study for labor efficiency and cost-effectiveness were not affected by patient case mix and illness severity. Factors that were associated with labor efficiency were identified as managerial styles, and organizational designs that balance workload and labor resources. Medical directors' managerial involvement was not associated with labor efficiency, but their continuing education and specialty in blood bank were found to reduce the performance of unnecessary tests. Surprisingly, performing unnecessary tests had no association with labor efficiency. This suggested the existence of labor slack in blood banks. Cost -effectiveness was associated with workers' benefits, wages, and the production of high-end transfusion products by hospital-based donor rooms. Quality indices used in this study included autologous transfusion rates, platelet transfusion rates, and the check points available in an error-control system. Because the autologous transfusion rate was related to patient case mix, severity of illness, and possible inappropriate transfusion, it was not recommended to be used for quality index. Platelet-pheresis transfusion rates were associated with the transfusion preferences of the blood bank medical directors. The total number of check points in an error -control system was negatively associated with government ownership and workers' experience. Recommendations for improving labor efficiency and cost-effectiveness were focused on an incentive system that encourages team effort, and the use of appropriate measurements for laboratory efficiency and operational system designs.

Quantifying a Total Non-Methane Hydrocarbon Signal using Low-Cost VOC Sensors in an Effort to Help Communities Learn More About their Air Quality

NASA Astrophysics Data System (ADS)

Collier, A. M.; Hannigan, M.; Piedrahita, R.; Casey, J. G.; Johnston, J.; Chiang, S.

2016-12-01

The growing accessibility of low-cost air quality monitoring technologies has led to their increased usage among community-based organizations, particularly for the monitoring of pollutants dangerous to human health (e.g., hazardous air pollutants or HAPS). However, often these low-cost sensors are `off-the-shelf' and are being utilized in a manner that differs from their intended purpose - necessitating high quality calibrations. For example, VOC sensors intended for the detection of high levels of a particular compound in an industrial setting may instead be used for ambient monitoring of a group of VOCs. Academic/community partnerships can be an ideal way to improve this type of sensor quantification while providing a community with not only the opportunity to use these technologies with additional support around data quality, but also the opportunity for education around the abilities and applications of low-cost sensors. In the spring of 2016, our lab at the University of Colorado, Boulder partnered with communities in Los Angeles and Kern County to deploy low-cost air quality monitors for the purpose of quantifying methane and non-methane hydrocarbon signals in an effort to learn more about potential impacts from local sources (e.g., nearby highways and oil & gas development). The monitoring platform was developed in our lab and is capable of logging multiple gas phase species as well as some environmental parameters. The monitors include two different metal oxide VOC sensors - each with slightly different sensing capabilities. Calibration was achieved using a pre- and post-deployment field normalization to reference monitoring equipment maintained by the South Coast Air Quality Management District. Monitors were then deployed at locations throughout the community. We will present results on our efforts to quantify a total non-methane hydrocarbon signal, observations from the field data, and recommendations for academic/community partnerships formed around air quality monitoring.

Positive Attitude toward Healthy Eating Predicts Higher Diet Quality at All Cost Levels of Supermarkets☆

PubMed Central

Aggarwal, Anju; Monsivais, Pablo; Cook, Andrea J.; Drewnowski, Adam

2014-01-01

Shopping at low-cost supermarkets has been associated with higher obesity rates. This study examined whether attitudes toward healthy eating are independently associated with diet quality among shoppers at low-cost, medium-cost, and high-cost supermarkets. Data on socioeconomic status (SES), attitudes toward healthy eating, and supermarket choice were collected using a telephone survey of a representative sample of adult residents of King County, WA. Dietary intake data were based on a food frequency questionnaire. Thirteen supermarket chains were stratified into three categories: low, medium, and high cost, based on a market basket of 100 commonly eaten foods. Diet-quality measures were energy density, mean adequacy ratio, and total servings of fruits and vegetables. The analytical sample consisted of 963 adults. Multivariable regressions with robust standard error examined relations between diet quality, supermarket type, attitudes, and SES. Shopping at higher-cost supermarkets was associated with higher-quality diets. These associations persisted after adjusting for SES, but were eliminated after taking attitudinal measures into account. Supermarket shoppers with positive attitudes toward healthy eating had equally higher-quality diets, even if they shopped at low-, medium-, or high-cost supermarkets, independent of SES and other covariates. These findings imply that shopping at low-cost supermarkets does not prevent consumers from having high-quality diets, as long as they attach importance to good nutrition. Promoting nutrition-education strategies among supermarkets, particularly those catering to low-income groups, can help to improve diet quality. PMID:23916974

The effectiveness and cost-effectiveness of clinical nurse specialists in outpatient roles: a systematic review.

PubMed

Kilpatrick, Kelley; Kaasalainen, Sharon; Donald, Faith; Reid, Kim; Carter, Nancy; Bryant-Lukosius, Denise; Martin-Misener, Ruth; Harbman, Patricia; Marshall, Deborah Anne; Charbonneau-Smith, Renee; DiCenso, Alba

2014-12-01

Increasing numbers of clinical nurse specialists (CNSs) are working in outpatient settings. The objective of this paper is to describe a systematic review of randomized controlled trials (RCTs) evaluating the cost-effectiveness of CNSs delivering outpatient care in alternative or complementary provider roles. We searched CINAHL, MEDLINE, EMBASE and seven other electronic databases, 1980 to July 2012 and hand-searched bibliographies and key journals. RCTs that evaluated formally trained CNSs and health system outcomes were included. Study quality was assessed using the Cochrane risk of bias tool and the Quality of Health Economic Studies instrument. We used the Grading of Recommendations Assessment, Development and Evaluation to assess quality of evidence for individual outcomes. Eleven RCTs, four evaluating alternative provider (n = 683 participants) and seven evaluating complementary provider roles (n = 1464 participants), were identified. Results of the alternative provider RCTs (low-to-moderate quality evidence) were fairly consistent across study populations with similar patient outcomes to usual care, some evidence of reduced resource use and costs, and two economic analyses (one fair and one high quality) favouring CNS care. Results of the complementary provider RCTs (low-to-moderate quality evidence) were also fairly consistent across study populations with similar or improved patient outcomes and mostly similar health system outcomes when compared with usual care; however, the economic analyses were weak. Low-to-moderate quality evidence supports the effectiveness and two fair-to-high quality economic analyses support the cost-effectiveness of outpatient alternative provider CNSs. Low-to-moderate quality evidence supports the effectiveness of outpatient complementary provider CNSs; however, robust economic evaluations are needed to address cost-effectiveness. © 2014 John Wiley & Sons, Ltd.

Development and Application of New Quality Model for Software Projects

PubMed Central

Karnavel, K.; Dillibabu, R.

2014-01-01

The IT industry tries to employ a number of models to identify the defects in the construction of software projects. In this paper, we present COQUALMO and its limitations and aim to increase the quality without increasing the cost and time. The computation time, cost, and effort to predict the residual defects are very high; this was overcome by developing an appropriate new quality model named the software testing defect corrective model (STDCM). The STDCM was used to estimate the number of remaining residual defects in the software product; a few assumptions and the detailed steps of the STDCM are highlighted. The application of the STDCM is explored in software projects. The implementation of the model is validated using statistical inference, which shows there is a significant improvement in the quality of the software projects. PMID:25478594

Development and application of new quality model for software projects.

PubMed

Karnavel, K; Dillibabu, R

2014-01-01

The IT industry tries to employ a number of models to identify the defects in the construction of software projects. In this paper, we present COQUALMO and its limitations and aim to increase the quality without increasing the cost and time. The computation time, cost, and effort to predict the residual defects are very high; this was overcome by developing an appropriate new quality model named the software testing defect corrective model (STDCM). The STDCM was used to estimate the number of remaining residual defects in the software product; a few assumptions and the detailed steps of the STDCM are highlighted. The application of the STDCM is explored in software projects. The implementation of the model is validated using statistical inference, which shows there is a significant improvement in the quality of the software projects.

Handbook for the Commonwealth of Learning Review and Improvement Model: Making Quality Work in Higher Education

ERIC Educational Resources Information Center

Commonwealth of Learning, 2010

2010-01-01

The Commonwealth of Learning Review and Improvement Model (COL RIM) was developed by the Commonwealth of Learning in response to two key drivers: (1) Increased global emphasis on the quality of higher education; and (2) Rising concern about the high cost and uncertain benefits of conventional approaches to external quality assurance. Any…

Generating high-quality single droplets for optical particle characterization with an easy setup

NASA Astrophysics Data System (ADS)

Xu, Jie; Ge, Baozhen; Meng, Rui

2018-06-01

The high-performance and micro-sized single droplet is significant for optical particle characterization. We develop a single-droplet generator (SDG) based on a piezoelectric inkjet technique with advantages of low cost and easy setup. By optimizing the pulse parameters, we achieve various size single droplets. Further investigations reveal that SDG generates single droplets of high quality, demonstrating good sphericity, monodispersity and a stable length of several millimeters.

Management Models and Cost Analysis for Regional Special Education Programs.

ERIC Educational Resources Information Center

Connors, Eugene T.

The implementation of the Education for All Handicapped Children Act (PL 94-142) has placed an enormous financial burden on local districts. In order to create special education programs that combine cost effectiveness and high quality, a regional model has been developed. The Therapeutic Residential Experience for Emotional Stability (TREES) in…

Cost-effectiveness analysis of adjunct VSL#3 therapy versus standard medical therapy in pediatric ulcerative colitis.

PubMed

Park, K T; Perez, Felipe; Tsai, Raymond; Honkanen, Anita; Bass, Dorsey; Garber, Alan

2011-11-01

Inflammatory bowel diseases (IBDs) are costly chronic gastrointestinal diseases, with pediatric IBD representing increased costs per patient compared to adult disease. Health care expenditures for ulcerative colitis (UC) are >$2 billion annually. It is not clear whether the addition of VSL#3 to standard medical therapy in UC induction and maintenance of remission is a cost-effective strategy. We performed a systematic review of the literature and created a Markov model simulating a cohort of 10-year-old patients with severe UC, studying them until 100 years of age or death. We compared 2 strategies: standard medical therapy versus medical therapy + VSL#3. For both strategies, we assumed that patients progressed through escalating therapies--mesalamine, azathioprine, and infliximab--before receiving a colectomy + ileal pouch anal anastamosis (IPAA) if the 3 medical therapy options were exhausted. The primary outcome measure was the incremental cost-effectiveness ratio (ICER), defined as the difference of costs between strategies for each quality-adjusted life-year (QALY) gained. One-way sensitivity analyses were performed on variables to determine the key variables affecting cost-effectiveness. Standard medical care accrued a lifetime cost of $203,317 per patient, compared to $212,582 per patient for medical therapy + VSL#3. Lifetime QALYs gained was comparable for standard medical therapy and medical therapy + VSL#3 at 24.93 versus 25.05, respectively. Using the definition of ICER <50,000/QALY as a cost-effective intervention, medical therapy + VSL#3 produced an ICER of $79,910 per QALY gained, making this strategy cost-ineffective. Sensitivity analyses showed that 4 key parameters could affect the cost-effectiveness of the 2 strategies: cost of colectomy + IPAA, maintenance cost after surgery, probability of developing pouchitis after surgery, and the quality of life after a colectomy + IPAA. High surgical and postsurgical costs, a high probability of developing pouchitis, and a low quality of life after a colectomy + IPAA could make adjunct VSL#3 use a cost-effective strategy. Given present data, adjunct VSL#3 use for pediatric UC induction and maintenance of remission is not cost-effective, although several key parameters could make this strategy cost-effective. The quality of life after an IPAA is the single most important variable predicting whether this procedure benefits patients over escalating standard medical therapy.

Perinatal depression and child development: exploring the economic consequences from a South London cohort.

PubMed

Bauer, A; Pawlby, S; Plant, D T; King, D; Pariante, C M; Knapp, M

2015-01-01

Depression in mothers during pregnancy and in the postnatal period has been recognized to have wide-ranging adverse impacts on offspring. Our study examines some of the outcomes and long-term economic implications experienced by offspring who have been exposed to perinatal depression. We analysed the effects of perinatal depression on child development outcomes of children at ages 11 and 16 years from the community-based South London Child Development Study. Economic consequences were attached to those outcomes through simple decision-analytic techniques, building on evidence from studies of epidemiology, health-related quality of life, public sector costs and employment. The economic analysis takes a life-course perspective from the viewpoints of the public sector, individual and society. Additional risks that children exposed to perinatal depression develop emotional, behavioural or cognitive problems ranged from 5% to 21%. In addition, there was a high risk (24%) that children would have special educational needs. We present results in the form of cost consequences attached to adverse child outcomes. For each child exposed to perinatal depression, public sector costs exceeded £3030, costs due to reduced earnings were £1400 and health-related quality of life loss was valued at £3760. Action to prevent or treat mothers' depression during pregnancy and after birth is likely to reduce public sector costs, increase earnings and improve quality of life for children who were exposed to the condition.

Cost Models for MMC Manufacturing Processes

NASA Technical Reports Server (NTRS)

Elzey, Dana M.; Wadley, Haydn N. G.

1996-01-01

The quality cost modeling (QCM) tool is intended to be a relatively simple-to-use device for obtaining a first-order assessment of the quality-cost relationship for a given process-material combination. The QCM curve is a plot of cost versus quality (an index indicating microstructural quality), which is unique for a given process-material combination. The QCM curve indicates the tradeoff between cost and performance, thus enabling one to evaluate affordability. Additionally, the effect of changes in process design, raw materials, and process conditions on the cost-quality relationship can be evaluated. Such results might indicate the most efficient means to obtain improved quality at reduced cost by process design refinements, the implementation of sensors and models for closed loop process control, or improvement in the properties of raw materials being fed into the process. QCM also allows alternative processes for producing the same or similar material to be compared in terms of their potential for producing competitively priced, high quality material. Aside from demonstrating the usefulness of the QCM concept, this is one of the main foci of the present research program, namely to compare processes for making continuous fiber reinforced, metal matrix composites (MMC's). Two processes, low pressure plasma spray deposition and tape casting are considered for QCM development. This document consists of a detailed look at the design of the QCM approach, followed by discussion of the application of QCM to each of the selected MMC manufacturing processes along with results, comparison of processes, and finally, a summary of findings and recommendations.

Teachers' Perceptions of the Effectiveness of Professional Development

ERIC Educational Resources Information Center

Sanders, Deborah

2014-01-01

Professional development is a recognized approach to improving the quality of instruction in schools. The goal of professional development is to increase teachers' knowledge and improve their practices, which lead to enhanced student learning. The problem with providing staff development is the high cost incurred by presenters' fees, and…

Cost-effectiveness of a quality improvement collaborative for obstetric and newborn care in Niger.

PubMed

Broughton, Edward; Saley, Zakari; Boucar, Maina; Alagane, Dondi; Hill, Kathleen; Marafa, Aicha; Asma, Yaroh; Sani, Karimou

2013-01-01

The purpose of this paper is to describe a quality improvement collaborative conducted in 33 Nigerian facilities to improve maternal and newborn care outcomes by increasing compliance with high-impact, evidence-based care standards. Intervention costs and cost-effectiveness were examined and costs to the Niger Health Ministry (MoH) were estimated if they were to scale-up the intervention to additional sites. Facility-based maternal care outcomes and costs from pre-quality improvement collaborative baseline monitoring data in participating facilities from January to May 2006 were compared with outcomes and costs from the same facilities from June 2008 to September 2008. Cost data were collected from project accounting records. The MoH costs were determined from interviews with clinic managers and quality improvement teams. Effectiveness data were obtained from facilities' records. The average delivery-cost decreased from $35 before to $28 after the collaborative. The USAID/HCI project's incremental cost was $2.43/delivery. The collaborative incremental cost-effectiveness was $147/disability-adjusted life year averted. If the MoH spread the intervention to other facilities, substantive cost-savings and improved health outcomes can be predicted. The intervention achieved significant positive health benefits for a low cost. The Niger MoH can expect approximately 50 per cent return on its investment if it implements the collaborative in new facilities. The improvement collaborative approach can improve health and save health care resources. This is one of the first studies known to examine collaborative quality improvement and economic efficiency in a developing country.

AIRQino, a low-cost air quality mobile platform

NASA Astrophysics Data System (ADS)

Zaldei, Alessandro; Vagnoli, Carolina; Di Lonardo, Sara; Gioli, Beniamino; Gualtieri, Giovanni; Toscano, Piero; Martelli, Francesca; Matese, Alessandro

2015-04-01

Recent air quality regulations (Directive 2008/50/EC) enforce the transition from point-based monitoring networks to new tools that must be capable of mapping and forecasting air quality on the totality of land area, and therefore the totality of citizens. This implies new technologies such as models and additional indicative measurements, are needed in addition to accurate fixed air quality monitoring stations, that until now have been taken as reference by local administrators for the enforcement of various mitigation strategies. However, due to their sporadic spatial distribution, they cannot describe the highly resolved spatial pollutant variations within cities. Integrating additional indicative measurements may provide adequate information on the spatial distribution of the ambient air quality, also allowing for a reduction of the required minimum number of fixed sampling points, whose high cost and complex maintenance still remain a crucial concern for local administrators. New low-cost and small size sensors are becoming available, that could be employed in air quality monitoring including mobile applications. However, accurate assessment of their accuracy and performance both in controlled and real monitoring conditions is crucially needed. Quantifying sensor response is a significant challenge due to the sensitivity to ambient temperature and humidity and the cross-sensitivity to others pollutant species. This study reports the development of an Arduino compatible electronic board (AIRQino) which integrates a series of low-cost metal oxide and NDIR sensors for air quality monitoring, with sensors to measure air temperature, relative humidity, noise, solar radiation and vertical acceleration. A comparative assessment was made for CO2, CO, NO2, CH4, O3, VOCs concentrations, temperature and relative humidity. A controlled climatic chamber study (-80°C / +80°C) was performed to verify temperature and humidity interference using reference gas cylinders and high quality reference sensors. The AIRQino was installed on mobile vectors such as bikes, buses and trams in the cities of Firenze and Siracusa (Italy), that send data real-time to a Web portal. By integrating a microprocessor unit it is capable of directly updating calibration coefficients to provide corrected sensor output as digital string through RS232 serial port. Results from the lab tests and the 'real world' mobile applications are presented and discussed, to assess to what extent this sensor technology might be useful for the development of portable, compact, wireless and cost-effective system for air quality monitoring in urban areas at high spatio-temporal resolution.

Assessing the quality of cost management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fayne, V.; McAllister, A.; Weiner, S.B.

1995-12-31

Managing environmental programs can be effective only when good cost and cost-related management practices are developed and implemented. The Department of Energy`s Office of Environmental Management (EM), recognizing this key role of cost management, initiated several cost and cost-related management activities including the Cost Quality Management (CQM) Program. The CQM Program includes an assessment activity, Cost Quality Management Assessments (CQMAs), and a technical assistance effort to improve program/project cost effectiveness. CQMAs provide a tool for establishing a baseline of cost-management practices and for measuring improvement in those practices. The result of the CQMA program is an organization that has anmore » increasing cost-consciousness, improved cost-management skills and abilities, and a commitment to respond to the public`s concerns for both a safe environment and prudent budget outlays. The CQMA program is part of the foundation of quality management practices in DOE. The CQMA process has contributed to better cost and cost-related management practices by providing measurements and feedback; defining the components of a quality cost-management system; and helping sites develop/improve specific cost-management techniques and methods.« less

Positive attitude toward healthy eating predicts higher diet quality at all cost levels of supermarkets.

PubMed

Aggarwal, Anju; Monsivais, Pablo; Cook, Andrea J; Drewnowski, Adam

2014-02-01

Shopping at low-cost supermarkets has been associated with higher obesity rates. This study examined whether attitudes toward healthy eating are independently associated with diet quality among shoppers at low-cost, medium-cost, and high-cost supermarkets. Data on socioeconomic status (SES), attitudes toward healthy eating, and supermarket choice were collected using a telephone survey of a representative sample of adult residents of King County, WA. Dietary intake data were based on a food frequency questionnaire. Thirteen supermarket chains were stratified into three categories: low, medium, and high cost, based on a market basket of 100 commonly eaten foods. Diet-quality measures were energy density, mean adequacy ratio, and total servings of fruits and vegetables. The analytical sample consisted of 963 adults. Multivariable regressions with robust standard error examined relations between diet quality, supermarket type, attitudes, and SES. Shopping at higher-cost supermarkets was associated with higher-quality diets. These associations persisted after adjusting for SES, but were eliminated after taking attitudinal measures into account. Supermarket shoppers with positive attitudes toward healthy eating had equally higher-quality diets, even if they shopped at low-, medium-, or high-cost supermarkets, independent of SES and other covariates. These findings imply that shopping at low-cost supermarkets does not prevent consumers from having high-quality diets, as long as they attach importance to good nutrition. Promoting nutrition-education strategies among supermarkets, particularly those catering to low-income groups, can help to improve diet quality. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Cost-effectiveness analyses of hepatitis A vaccine: a systematic review to explore the effect of methodological quality on the economic attractiveness of vaccination strategies.

PubMed

Anonychuk, Andrea M; Tricco, Andrea C; Bauch, Chris T; Pham, Ba'; Gilca, Vladimir; Duval, Bernard; John-Baptiste, Ava; Woo, Gloria; Krahn, Murray

2008-01-01

Hepatitis A vaccines have been available for more than a decade. Because the burden of hepatitis A virus has fallen in developed countries, the appropriate role of vaccination programmes, especially universal vaccination strategies, remains unclear. Cost-effectiveness analysis is a useful method of relating the costs of vaccination to its benefits, and may inform policy. This article systematically reviews the evidence on the cost effectiveness of hepatitis A vaccination in varying populations, and explores the effects of methodological quality and key modelling issues on the cost-effectiveness ratios.Cost-effectiveness/cost-utility studies of hepatitis A vaccine were identified via a series of literature searches (MEDLINE, EMBASE, HSTAR and SSCI). Citations and full-text articles were reviewed independently by two reviewers. Reference searching, author searches and expert consultation ensured literature saturation. Incremental cost-effectiveness ratios (ICERs) were abstracted for base-case analyses, converted to $US, year 2005 values, and categorised to reflect various levels of cost effectiveness. Quality of reporting, methodological issues and key modelling issues were assessed using frameworks published in the literature.Thirty-one cost-effectiveness studies (including 12 cost-utility analyses) were included from full-text article review (n = 58) and citation screening (n = 570). These studies evaluated universal mass vaccination (n = 14), targeted vaccination (n = 17) and vaccination of susceptibles (i.e. individuals initially screened for antibody and, if susceptible, vaccinated) [n = 13]. For universal vaccination, 50% of the ICERs were <$US20 000 per QALY or life-year gained. Analyses evaluating vaccination in children, particularly in high incidence areas, produced the most attractive ICERs. For targeted vaccination, cost effectiveness was highly dependent on the risk of infection.Incidence, vaccine cost and discount rate were the most influential parameters in sensitivity analyses. Overall, analyses that evaluated the combined hepatitis A/hepatitis B vaccine, adjusted incidence for under-reporting, included societal costs and that came from studies of higher methodological quality tended to have more attractive cost-effectiveness ratios. Methodological quality varied across studies. Major methodological flaws included inappropriate model type, comparator, incidence estimate and inclusion/exclusion of costs.

To Build or Not to Build: Addressing Facilities Needs While Controlling Costs

ERIC Educational Resources Information Center

Kadamus, James A.

2015-01-01

When trustees, presidents, and senior college administrators meet, one topic dominates the conversation: how to keep education quality high and costs down. To keep quality high, college leaders need to have strong faculties and state-of-the-art facilities for teaching and research. Quality counts but it also costs, and that is where the pressures…

Superior Weapons Systems Through Castings (SWC)

DTIC Science & Technology

2012-11-30

little or no additional processing. This reduction in finishing can eliminate more than two-thirds of the production costs for some parts...lower weight and cost with the same or better functionality. The SWC program has successfully: • developed materials that reduce weight and/or are more...critical to the capability of the DoD’s weapon systems. However supply chain constraints have made it difficult to obtain high-quality, lightweight, cost

A Distributed Online Curriculum and Courseware Development Model

ERIC Educational Resources Information Center

Durdu, Pinar Onay; Yalabik, Nese; Cagiltay, Kursat

2009-01-01

A distributed online curriculum and courseware development model (DONC[superscript 2]) is developed and tested in this study. Courseware development teams which may work in different institutions who need to develop high quality, reduced cost, on time products will be the users of DONC[superscript 2]. The related features from the disciplines of…

Cost Effective Development of Usable Systems: Gaps between HCI and Software Architecture Design

NASA Astrophysics Data System (ADS)

Folmer, Eelke; Bosch, Jan

A software product with poor usability is likely to fail in a highly competitive market; therefore software developing organizations are paying more and more attention to ensuring the usability of their software. Practice, however, shows that product quality (which includes usability among others) is not that high as it could be. Studies of software projects (Pressman, 2001) reveal that organizations spend a relative large amount of money and effort on fixing usability problems during late stage development. Some of these problems could have been detected and fixed much earlier. This avoidable rework leads to high costs and because during development different tradeoffs have to be made, for example between cost and quality leads to systems with less than optimal usability. This problem has been around for a couple of decades especially after software engineering (SE) and human computer interaction (HCI) became disciplines on their own. While both disciplines developed themselves, several gaps appeared which are now receiving increased attention in research literature. Major gaps of understanding, both between suggested practice and how software is actually developed in industry, but also between the best practices of each of the fields have been identified (Carrol et al, 1994, Bass et al, 2001, Folmer and Bosch, 2002). In addition, there are gaps in the fields of differing terminology, concepts, education, and methods.

LEC GaAs for integrated circuit applications

NASA Technical Reports Server (NTRS)

Kirkpatrick, C. G.; Chen, R. T.; Homes, D. E.; Asbeck, P. M.; Elliott, K. R.; Fairman, R. D.; Oliver, J. D.

1984-01-01

Recent developments in liquid encapsulated Czochralski techniques for the growth of semiinsulating GaAs for integrated circuit applications have resulted in significant improvements in the quality and quantity of GaAs material suitable for device processing. The emergence of high performance GaAs integrated circuit technologies has accelerated the demand for high quality, large diameter semiinsulating GaAs substrates. The new device technologies, including digital integrated circuits, monolithic microwave integrated circuits and charge coupled devices have largely adopted direct ion implantation for the formation of doped layers. Ion implantation lends itself to good uniformity and reproducibility, high yield and low cost; however, this technique also places stringent demands on the quality of the semiinsulating GaAs substrates. Although significant progress was made in developing a viable planar ion implantation technology, the variability and poor quality of GaAs substrates have hindered progress in process development.

Nutrient adequacy and diet quality in low-income Hispanic Children – The VIVA LA FAMILIA Study

USDA-ARS?s Scientific Manuscript database

The role of nutrient adequacy and diet quality in the etiology of childhood obesity is poorly understood. Epidemiological studies have suggested that low-cost, energy dense diets high in grains, added sugars, and fat contribute to the development of obesity, especially in low-income groups. The spec...

Distance Education for Physicians: Adaptation of a Canadian Experience to Uruguay

ERIC Educational Resources Information Center

Llambi, Laura; Margolis, Alvaro; Toews, John; Dapueto, Juan; Esteves, Elba; Martinez, Elisa; Forster, Thais; Lopez, Antonio; Lockyer, Jocelyn

2008-01-01

Introduction: The production of online high-quality continuing professional development is a complex process that demands familiarity with effective program and content design. Collaboration and sharing across nations would appear to be a reasonable way to improve quality, increase access, and reduce costs. Methods: In this case report, the…

Is Bigger Better? Customer Base Expansion through Word-of-Mouth Reputation

ERIC Educational Resources Information Center

Rob, Rafael; Fishman, Arthur

2005-01-01

A model of gradual reputation formation through a process of continuous investment in product quality is developed. We assume that the ability to produce high-quality products requires continuous investment and that as a consequence of informational frictions, such as search costs, information about firms' past performance diffuses only gradually…

Advanced scatter search approach and its application in a sequencing problem of mixed-model assembly lines in a case company

NASA Astrophysics Data System (ADS)

Liu, Qiong; Wang, Wen-xi; Zhu, Ke-ren; Zhang, Chao-yong; Rao, Yun-qing

2014-11-01

Mixed-model assembly line sequencing is significant in reducing the production time and overall cost of production. To improve production efficiency, a mathematical model aiming simultaneously to minimize overtime, idle time and total set-up costs is developed. To obtain high-quality and stable solutions, an advanced scatter search approach is proposed. In the proposed algorithm, a new diversification generation method based on a genetic algorithm is presented to generate a set of potentially diverse and high-quality initial solutions. Many methods, including reference set update, subset generation, solution combination and improvement methods, are designed to maintain the diversification of populations and to obtain high-quality ideal solutions. The proposed model and algorithm are applied and validated in a case company. The results indicate that the proposed advanced scatter search approach is significant for mixed-model assembly line sequencing in this company.

Engaging the Board in Conversations about College Costs

ERIC Educational Resources Information Center

Lapovsky, Lucie

2006-01-01

One of the most pressing questions in American higher education today is how to make high-quality education available to all who seek it. At the heart of discussions of access and quality are matters of cost and price. How much will it cost an institution to make high-quality education available, and what will be the price for those who want that…

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

Cost-effectiveness Analysis of Nutritional Support for the Prevention of Pressure Ulcers in High-Risk Hospitalized Patients.

PubMed

Tuffaha, Haitham W; Roberts, Shelley; Chaboyer, Wendy; Gordon, Louisa G; Scuffham, Paul A

2016-06-01

To evaluate the cost-effectiveness of nutritional support compared with standard care in preventing pressure ulcers (PrUs) in high-risk hospitalized patients. An economic model using data from a systematic literature review. A meta-analysis of randomized controlled trials on the efficacy of nutritional support in reducing the incidence of PrUs was conducted. Modeled cohort of hospitalized patients at high risk of developing PrUs and malnutrition simulated during their hospital stay and up to 1 year. Standard care included PrU prevention strategies, such as redistribution surfaces, repositioning, and skin protection strategies, along with standard hospital diet. In addition to the standard care, the intervention group received nutritional support comprising patient education, nutrition goal setting, and the consumption of high-protein supplements. The analysis was from a healthcare payer perspective. Key outcomes of the model included the average costs and quality-adjusted life years. Model results were tested in univariate sensitivity analyses, and decision uncertainty was characterized using a probabilistic sensitivity analysis. Compared with standard care, nutritional support was cost saving at AU $425 per patient and marginally more effective with an average 0.005 quality-adjusted life years gained. The probability of nutritional support being cost-effective was 87%. Nutritional support to prevent PrUs in high-risk hospitalized patients is cost-effective with substantial cost savings predicted. Hospitals should implement the recommendations from the current PrU practice guidelines and offer nutritional support to high-risk patients.

78 countries: immunization financing in developing and transitional countries.

PubMed

Deroeck, D; Levin, A

1999-01-01

The Special Initiative on Immunization Financing is a project that reviews available information on immunization costs and financing in developing countries in order to inform planned field-based activities to increase sustainability of immunization programs. While routine immunization costs just pennies a dose, newer vaccines such as hepatitis B vaccine cost much more; the full cost of making them routine are not yet known. However, a growing number of governments are paying for these vaccines. Three-quarters of the countries responding to the survey have immunization and vaccination programs in their national budgets. Moreover, international organizations have set up fund and procurement mechanisms to aid countries purchase low-cost, high-quality vaccines.

Financial analysis for the infusion alliance.

PubMed

Perucca, Roxanne

2010-01-01

Providing high-quality, cost-efficient care is a major strategic initiative of every health care organization. Today's health care environment is transparent; very competitive; and focused upon providing exceptional service, safety, and quality. Establishing an infusion alliance facilitates the achievement of organizational strategic initiatives, that is, increases patient throughput, decreases length of stay, prevents the occurrence of infusion-related complications, enhances customer satisfaction, and provides greater cost-efficiency. This article will discuss how to develop a financial analysis that promotes value and enhances the financial outcomes of an infusion alliance.

Can aging in place be cost effective? A systematic review.

PubMed

Graybill, Erin M; McMeekin, Peter; Wildman, John

2014-01-01

To systematically review cost, cost-minimization and cost-effectiveness studies for assisted living technologies (ALTs) that specifically enable older people to 'age in place' and highlight what further research is needed to inform decisions regarding aging in place. People aged 65+ and their live-in carers (where applicable), using an ALT to age in place at home opposed to a community-dwelling arrangement. Studies were identified using a predefined search strategy on two key economic and cost evaluation databases NHS EED, HEED. Studies were assessed using methods recommended by the Campbell and Cochrane Economic Methods Group and presented in a narrative synthesis style. Eight eligible studies were identified from North America spread over a diverse geographical range. The majority of studies reported the ALT intervention group as having lower resource use costs than the control group; though the low methodological quality and heterogeneity of the individual costs and outcomes reported across studies must be considered. The studies suggest that in some cases ALTs may reduce costs, though little data were identified and what there were was of poor quality. Methods to capture quality of life gains were not used, therefore potential effects on health and wellbeing may be missed. Further research is required using newer developments such as the capabilities approach. High quality studies assessing the cost-effectiveness of ALTs for ageing in place are required before robust conclusion on their use can be drawn.

Learning Objects and the E-Learning Cost Dilemma

ERIC Educational Resources Information Center

Weller, Martin

2004-01-01

The creation of quality e-learning material creates a cost dilemma for many institutions, since it has both high variable and high fixed costs. This cost dilemma means that economies of scale are difficult to achieve, which may result in a consequent reduction in the quality of the learning material. Based on the experience of creating a masters…

Pork Production System and its Development in Mainland China

USDA-ARS?s Scientific Manuscript database

Livestock production and marketing have been driven by the growing consumer demand for high quality and low cost animal protein. As a result, intensive livestock industries have been rapidly developing globally. International trade creates new opportunities and challenges for U.S. animal agriculture...

Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarsa, Eric

2015-08-31

During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimallymore » distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.« less

Elevated guideway cost-ride quality studies for group rapid transit systems

DOT National Transportation Integrated Search

1977-10-01

A methodology is developed for relating cost to ride quality in elevated guideway : system design, based upon directly relating guideway structural properties and : construction tolerances to both cost and ride quality. It is illustrated in detail : ...

Improvement of the cost-benefit analysis algorithm for high-rise construction projects

NASA Astrophysics Data System (ADS)

Gafurov, Andrey; Skotarenko, Oksana; Plotnikov, Vladimir

2018-03-01

The specific nature of high-rise investment projects entailing long-term construction, high risks, etc. implies a need to improve the standard algorithm of cost-benefit analysis. An improved algorithm is described in the article. For development of the improved algorithm of cost-benefit analysis for high-rise construction projects, the following methods were used: weighted average cost of capital, dynamic cost-benefit analysis of investment projects, risk mapping, scenario analysis, sensitivity analysis of critical ratios, etc. This comprehensive approach helped to adapt the original algorithm to feasibility objectives in high-rise construction. The authors put together the algorithm of cost-benefit analysis for high-rise construction projects on the basis of risk mapping and sensitivity analysis of critical ratios. The suggested project risk management algorithms greatly expand the standard algorithm of cost-benefit analysis in investment projects, namely: the "Project analysis scenario" flowchart, improving quality and reliability of forecasting reports in investment projects; the main stages of cash flow adjustment based on risk mapping for better cost-benefit project analysis provided the broad range of risks in high-rise construction; analysis of dynamic cost-benefit values considering project sensitivity to crucial variables, improving flexibility in implementation of high-rise projects.

Lessons Learned from Testing the Quality Cost Model of Advanced Practice Nursing (APN) Transitional Care

PubMed Central

Brooten, Dorothy; Naylor, Mary D.; York, Ruth; Brown, Linda P.; Munro, Barbara Hazard; Hollingsworth, Andrea O.; Cohen, Susan M.; Finkler, Steven; Deatrick, Janet; Youngblut, JoAnne M.

2013-01-01

Purpose To describe the development, testing, modification, and results of the Quality Cost Model of Advanced Practice Nurses (APNs) Transitional Care on patient outcomes and health care costs in the United States over 22 years, and to delineate what has been learned for nursing education, practice, and further research. Organizing Construct The Quality Cost Model of APN Transitional Care. Methods Review of published results of seven randomized clinical trials with very low birth-weight (VLBW) infants; women with unplanned cesarean births, high risk pregnancies, and hysterectomy surgery; elders with cardiac medical and surgical diagnoses and common diagnostic related groups (DRGs); and women with high risk pregnancies in which half of physician prenatal care was substituted with APN care. Ongoing work with the model is linking the process of APN care with the outcomes and costs of care. Findings APN intervention has consistently resulted in improved patient outcomes and reduced health care costs across groups. Groups with APN providers were rehospitalized for less time at less cost, reflecting early detection and intervention. Optimal number and timing of postdischarge home visits and telephone contacts by the APNs and patterns of rehospitalizations and acute care visits varied by group. Conclusions To keep people well over time, APNs must have depth of knowledge and excellent clinical and interpersonal skills that are the hallmark of specialist practice, an in-depth understanding of systems and how to work within them, and sufficient patient contact to effect positive outcomes at low cost. PMID:12501741

Can we maximize both value and quality in gynecologic cancer care? A work in progress.

PubMed

Havrilesky, Laura J; Fountain, Cynthia

2014-01-01

Value is defined as desirable health outcomes achieved per monetary unit spent. Comparative effectiveness research and cost-effectiveness research are methods that have been developed to quantify effectiveness and value to inform management decisions. In this article we review the comparative and cost-effectiveness literature in the field of ovarian cancer treatment. Studies have shown that improved ovarian cancer survival is associated with complete primary surgical cytoreduction, with treatment at high volume facilities by subspecialist providers (gynecologic oncologists) and with National Comprehensive Cancer Network (NCCN) guideline-adherent care in both surgical staging and chemotherapy regimens. Intraperitoneal/intravenous chemotherapy (compared with intravenous alone) has been associated with improved survival and cost-effectiveness. Bevacizumab for primary and maintenance therapy has been found to not be cost-effective (even in selective subsets) despite a small progression-free survival (PFS) advantage. For platinum-sensitive recurrent ovarian cancer, secondary cytoreduction and platinum-based combinations are associated with improved overall survival (OS); several platinum-based combinations have also been found cost-effective. For platinum-resistant recurrence, single agent therapy and supportive care are cost-effective compared with combination therapies. Although little prospective clinical research has been done around end-of-life care, one study reported that for platinum-resistant ovarian cancer, palliative intervention would potentially reduce costs and increase quality adjusted life years compared with usual care (based on improvement in quality of life [QOL]). Overall, cost comparisons of individual chemotherapy regimens are highly dependent on market prices of novel therapeutic agents.

Online Courses, Instructional Quality, and Economics: A Conceptual Analysis

ERIC Educational Resources Information Center

Jones, Craig H.; Slate, John R.

2009-01-01

In this article, we discuss the development of online courses in higher education in terms of the in- structional quality and economic costs. In our conceptual analysis, we point out problems in developing online courses with sufficient quality due to limited funds being made available for online course development. Moreover, economic costs exist…

Automated Reuse of Scientific Subroutine Libraries through Deductive Synthesis

NASA Technical Reports Server (NTRS)

Lowry, Michael R.; Pressburger, Thomas; VanBaalen, Jeffrey; Roach, Steven

1997-01-01

Systematic software construction offers the potential of elevating software engineering from an art-form to an engineering discipline. The desired result is more predictable software development leading to better quality and more maintainable software. However, the overhead costs associated with the formalisms, mathematics, and methods of systematic software construction have largely precluded their adoption in real-world software development. In fact, many mainstream software development organizations, such as Microsoft, still maintain a predominantly oral culture for software development projects; which is far removed from a formalism-based culture for software development. An exception is the limited domain of safety-critical software, where the high-assuiance inherent in systematic software construction justifies the additional cost. We believe that systematic software construction will only be adopted by mainstream software development organization when the overhead costs have been greatly reduced. Two approaches to cost mitigation are reuse (amortizing costs over many applications) and automation. For the last four years, NASA Ames has funded the Amphion project, whose objective is to automate software reuse through techniques from systematic software construction. In particular, deductive program synthesis (i.e., program extraction from proofs) is used to derive a composition of software components (e.g., subroutines) that correctly implements a specification. The construction of reuse libraries of software components is the standard software engineering solution for improving software development productivity and quality.

High-performance concrete : applying life-cycle cost analysis and developing specifications.

DOT National Transportation Integrated Search

2016-12-01

Numerous studies and transportation agency experience across the nation have established that highperformance concrete (HPC) technology improves concrete quality and extends the service life of concrete structures at risk of chlorideinduced cor...

High-Density, High-Resolution, Low-Cost Air Quality Sensor Networks for Urban Air Monitoring

NASA Astrophysics Data System (ADS)

Mead, M. I.; Popoola, O. A.; Stewart, G.; Bright, V.; Kaye, P.; Saffell, J.

2012-12-01

Monitoring air quality in highly granular environments such as urban areas which are spatially heterogeneous with variable emission sources, measurements need to be made at appropriate spatial and temporal scales. Current routine air quality monitoring networks generally are either composed of sparse expensive installations (incorporating e.g. chemiluminescence instruments) or higher density low time resolution systems (e.g. NO2 diffusion tubes). Either approach may not accurately capture important effects such as pollutant "hot spots" or adequately capture spatial (or temporal) variability. As a result, analysis based on data from traditional low spatial resolution networks, such as personal exposure, may be inaccurate. In this paper we present details of a sophisticated, low-cost, multi species (gas phase, speciated PM, meteorology) air quality measurement network methodology incorporating GPS and GPRS which has been developed for high resolution air quality measurements in urban areas. Sensor networks developed in the Centre for Atmospheric Science (University of Cambridge) incorporated electrochemical gas sensors configured for use in urban air quality studies operating at parts-per-billion (ppb) levels. It has been demonstrated that these sensors can be used to measure key air quality gases such as CO, NO and NO2 at the low ppb mixing ratios present in the urban environment (estimated detection limits <4ppb for CO and NO and <1ppb for NO2. Mead et al (submitted Aug., 2012)). Based on this work, a state of the art multi species instrument package for deployment in scalable sensor networks has been developed which has general applicability. This is currently being employed as part of a major 3 year UK program at London Heathrow airport (the Sensor Networks for Air Quality (SNAQ) Heathrow project). The main project outcome is the creation of a calibrated, high spatial and temporal resolution data set for O3, NO, NO2, SO2, CO, CO2, VOCstotal, size-speciated PM, temperature, relative humidity, wind speed and direction. The network incorporates existing GPRS infrastructures for real time sending of data with low overheads in terms of cost, effort and installation. In this paper we present data from the SNAQ Heathrow project as well as previous deployments showing measurement capability at the ppb level for NO, NO2 and CO. We show that variability can be observed and measured quantitatively using these sensor networks over widely differing time scales from individual emission events, diurnal variability associated with traffic and meteorological conditions, through to longer term synoptic weather conditions and seasonal behaviour. This work demonstrates a widely applicable generic capability to urban areas, airports as well as other complex emissions environments making this sensor system methodology valuable for scientific, policy and regulatory issues. We conclude that the low-cost high-density network philosophy has the potential to provide a more complete assessment of the high-granularity air quality structure generally observed in the environment. Further, when appropriately deployed, has the potential to offer a new paradigm in air quality quantification and monitoring.

The Cost of High-Quality Pre-School Education in New Jersey

ERIC Educational Resources Information Center

Belfield, Clive; Schwartz, Heather

2007-01-01

This report calculates the full cost of providing well-planned, high quality pre-school for children in New Jersey, as required under "Abbott vs. Burke" (153 NJ 480 1998). The evidence on how high-quality pre-school improves the academic performance of children is compelling. After a rapid expansion over the last decade, many children in…

The Cost-Effectiveness of High-Risk Lung Cancer Screening and Drivers of Program Efficiency.

PubMed

Cressman, Sonya; Peacock, Stuart J; Tammemägi, Martin C; Evans, William K; Leighl, Natasha B; Goffin, John R; Tremblay, Alain; Liu, Geoffrey; Manos, Daria; MacEachern, Paul; Bhatia, Rick; Puksa, Serge; Nicholas, Garth; McWilliams, Annette; Mayo, John R; Yee, John; English, John C; Pataky, Reka; McPherson, Emily; Atkar-Khattra, Sukhinder; Johnston, Michael R; Schmidt, Heidi; Shepherd, Frances A; Soghrati, Kam; Amjadi, Kayvan; Burrowes, Paul; Couture, Christian; Sekhon, Harmanjatinder S; Yasufuku, Kazuhiro; Goss, Glenwood; Ionescu, Diana N; Hwang, David M; Martel, Simon; Sin, Don D; Tan, Wan C; Urbanski, Stefan; Xu, Zhaolin; Tsao, Ming-Sound; Lam, Stephen

2017-08-01

Lung cancer risk prediction models have the potential to make programs more affordable; however, the economic evidence is limited. Participants in the National Lung Cancer Screening Trial (NLST) were retrospectively identified with the risk prediction tool developed from the Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial. The high-risk subgroup was assessed for lung cancer incidence and demographic characteristics compared with those in the low-risk subgroup and the Pan-Canadian Early Detection of Lung Cancer Study (PanCan), which is an observational study that was high-risk-selected in Canada. A comparison of high-risk screening versus standard care was made with a decision-analytic model using data from the NLST with Canadian cost data from screening and treatment in the PanCan study. Probabilistic and deterministic sensitivity analyses were undertaken to assess uncertainty and identify drivers of program efficiency. Use of the risk prediction tool developed from the Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial with a threshold set at 2% over 6 years would have reduced the number of individuals who needed to be screened in the NLST by 81%. High-risk screening participants in the NLST had more adverse demographic characteristics than their counterparts in the PanCan study. High-risk screening would cost $20,724 (in 2015 Canadian dollars) per quality-adjusted life-year gained and would be considered cost-effective at a willingness-to-pay threshold of $100,000 in Canadian dollars per quality-adjusted life-year gained with a probability of 0.62. Cost-effectiveness was driven primarily by non-lung cancer outcomes. Higher noncurative drug costs or current costs for immunotherapy and targeted therapies in the United States would render lung cancer screening a cost-saving intervention. Non-lung cancer outcomes drive screening efficiency in diverse, tobacco-exposed populations. Use of risk selection can reduce the budget impact, and screening may even offer cost savings if noncurative treatment costs continue to rise. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Child Development Functionality Assessment Guide: Standards and Requirements for Developing Most Efficient Organizations.

ERIC Educational Resources Information Center

Department of the Army, Washington, DC.

As part of its cost containment efforts, the U.S. Navy continues to evaluate its child development program to expand availability without compromising the high quality standards required by the 1989 Military Child Care Act. This manual provides guidelines for conducting Functionality Assessments (FA) and delineates the standards and requirements…

[The significance of meat quality in marketing].

PubMed

Kallweit, E

1994-07-01

Food quality in general and meat quality in particular are not only evaluated by means of objective quality traits but the entire production process is gaining more attention by the modern consumer. Due to this development quality programs were developed to define the majority of the processes in all production and marketing steps which are again linked by contracts. Not all of these items are quality relevant, but are concessions to ethic principles (animal welfare etc.). This is demonstrated by the example of Scharrel-pork production. The price differentiation at the pork market is still influenced predominantly by quantitative carcass traits. On the European market quality programs still are of minor significance. Premiums which are paid for high quality standards are more or less compensated by higher production costs and lower lean meat percentages, which must be expected in stress susceptible strains. The high efforts to establish quality programs, however, help to improve the quality level in general, and secure the market shares for local producers.

Cost-effectiveness of implementing computed tomography screening for lung cancer in Taiwan.

PubMed

Yang, Szu-Chun; Lai, Wu-Wei; Lin, Chien-Chung; Su, Wu-Chou; Ku, Li-Jung; Hwang, Jing-Shiang; Wang, Jung-Der

2017-06-01

A screening program for lung cancer requires more empirical evidence. Based on the experience of the National Lung Screening Trial (NLST), we developed a method to adjust lead-time bias and quality-of-life changes for estimating the cost-effectiveness of implementing computed tomography (CT) screening in Taiwan. The target population was high-risk (≥30 pack-years) smokers between 55 and 75 years of age. From a nation-wide, 13-year follow-up cohort, we estimated quality-adjusted life expectancy (QALE), loss-of-QALE, and lifetime healthcare expenditures per case of lung cancer stratified by pathology and stage. Cumulative stage distributions for CT-screening and no-screening were assumed equal to those for CT-screening and radiography-screening in the NLST to estimate the savings of loss-of-QALE and additional costs of lifetime healthcare expenditures after CT screening. Costs attributable to screen-negative subjects, false-positive cases and radiation-induced lung cancer were included to obtain the incremental cost-effectiveness ratio from the public payer's perspective. The incremental costs were US$22,755 per person. After dividing this by savings of loss-of-QALE (1.16 quality-adjusted life year (QALY)), the incremental cost-effectiveness ratio was US$19,683 per QALY. This ratio would fall to US$10,947 per QALY if the stage distribution for CT-screening was the same as that of screen-detected cancers in the NELSON trial. Low-dose CT screening for lung cancer among high-risk smokers would be cost-effective in Taiwan. As only about 5% of our women are smokers, future research is necessary to identify the high-risk groups among non-smokers and increase the coverage. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Cost-Effectiveness of a Community Pharmacist-Led Sleep Apnea Screening Program - A Markov Model.

PubMed

Perraudin, Clémence; Le Vaillant, Marc; Pelletier-Fleury, Nathalie

2013-01-01

Despite the high prevalence and major public health ramifications, obstructive sleep apnea syndrome (OSAS) remains underdiagnosed. In many developed countries, because community pharmacists (CP) are easily accessible, they have been developing additional clinical services that integrate the services of and collaborate with other healthcare providers (general practitioners (GPs), nurses, etc.). Alternative strategies for primary care screening programs for OSAS involving the CP are discussed. To estimate the quality of life, costs, and cost-effectiveness of three screening strategies among patients who are at risk of having moderate to severe OSAS in primary care. Markov decision model. Published data. Hypothetical cohort of 50-year-old male patients with symptoms highly evocative of OSAS. The 5 years after initial evaluation for OSAS. Societal. Screening strategy with CP (CP-GP collaboration), screening strategy without CP (GP alone) and no screening. Quality of life, survival and costs for each screening strategy. Under almost all modeled conditions, the involvement of CPs in OSAS screening was cost effective. The maximal incremental cost for "screening strategy with CP" was about 455€ per QALY gained. Our results were robust but primarily sensitive to the treatment costs by continuous positive airway pressure, and the costs of untreated OSAS. The probabilistic sensitivity analysis showed that the "screening strategy with CP" was dominant in 80% of cases. It was more effective and less costly in 47% of cases, and within the cost-effective range (maximum incremental cost effectiveness ratio at €6186.67/QALY) in 33% of cases. CP involvement in OSAS screening is a cost-effective strategy. This proposal is consistent with the trend in Europe and the United States to extend the practices and responsibilities of the pharmacist in primary care.

Quality and cost assessment of a recombinant antibody fragment produced from mammalian, yeast and prokaryotic host cells: A case study prior to pharmaceutical development.

PubMed

Lebozec, Kristell; Jandrot-Perrus, Martine; Avenard, Gilles; Favre-Bulle, Olivier; Billiald, Philippe

2018-09-25

Monoclonal antibody fragments (Fab) are a promising class of therapeutic agents. Fabs are aglycosylated proteins and so many expression platforms have been developed including prokaryotic, yeast and mammalian cells. However, these platforms are not equivalent in terms of cell line development and culture time, product quality and possibly cost of production that greatly influence the success of a drug candidate's pharmaceutical development. This study is an assessment of the humanized Fab fragment ACT017 produced from two microorganisms (Escherichia coli and Pichia pastoris) and one mammalian cell host (CHO). Following low scale production and Protein L-affinity purification under generic conditions, physico-chemical and functional quality assessments were carried out prior to economic analysis of industrial scale production using a specialized software (Biosolve, Biopharm Services, UK). Results show higher titer production when using E. coli but associated with high heterogeneity of the protein content recovered in the supernatant. We also observed glycoforms of the Fab produced from P. pastoris, while Fab secreted from CHO was the most homogeneous despite a much longer culture time and slightly higher estimated cost of goods. This study may help inform future pharmaceutical development of this class of therapeutic proteins. Copyright © 2018 Elsevier B.V. All rights reserved.

IMPROVING BIOMASS LOGISTICS COST WITHIN AGRONOMIC SUSTAINABILITY CONSTRAINTS AND BIOMASS QUALITY TARGETS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Richard Hess; Kevin L. Kenney; Christopher T. Wright

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements inmore » quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.« less

OLEDs for lighting: new approaches

NASA Astrophysics Data System (ADS)

Duggal, Anil R.; Foust, Donald F.; Nealon, William F.; Heller, Christian M.

2004-02-01

OLED technology has improved to the point where it is now possible to envision developing OLEDs as a low cost solid state light source. In order to realize this, significant advances have to be made in device efficiency, lifetime at high brightness, high throughput fabrication, and the generation of illumination quality white light. In this talk, the requirements for general lighting will be reviewed and various approaches to meeting them will be outlined. Emphasis will be placed on a new monolithic series-connected OLED design architecture that promises scalability without high fabrication cost or design complexity.

The Kaiser Permanente implant registries: effect on patient safety, quality improvement, cost effectiveness, and research opportunities.

PubMed

Paxton, Elizabeth W; Inacio, Maria Cs; Kiley, Mary-Lou

2012-01-01

Considering the high cost, volume, and patient safety issues associated with medical devices, monitoring of medical device performance is critical to ensure patient safety and quality of care. The purpose of this article is to describe the Kaiser Permanente (KP) implant registries and to highlight the benefits of these implant registries on patient safety, quality, cost effectiveness, and research. Eight KP implant registries leverage the integrated health care system's administrative databases and electronic health records system. Registry data collected undergo quality control and validation as well as statistical analysis. Patient safety has been enhanced through identification of affected patients during major recalls, identification of risk factors associated with outcomes of interest, development of risk calculators, and surveillance programs for infections and adverse events. Effective quality improvement activities included medical center- and surgeon-specific profiles for use in benchmarking reports, and changes in practice related to registry information output. Among the cost-effectiveness strategies employed were collaborations with sourcing and contracting groups, and assistance in adherence to formulary device guidelines. Research studies using registry data included postoperative complications, resource utilization, infection risk factors, thromboembolic prophylaxis, effects of surgical delay on concurrent injuries, and sports injury patterns. The unique KP implant registries provide important information and affect several areas of our organization, including patient safety, quality improvement, cost-effectiveness, and research.

The development of funding recommendations for health technologies at the state level: A South Australian case study.

PubMed

Lambert, Robyn; Carter, Drew; Burgess, Naomi; Haji Ali Afzali, Hossein

2018-04-20

State governments often face capped budgets that can restrict expenditure on health technologies and their evaluation, yet many technologies are introduced to practice through state-funded institutions such as hospitals, rather than through national evaluation mechanisms. This research aimed to identify the criteria, evidence, and standards used by South Australian committee members to recommend funding for high-cost health technologies. We undertook 8 semi-structured interviews and 2 meeting observations with members of state-wide committees that have a mandate to consider the safety, effectiveness, and cost-effectiveness of high-cost health technologies. Safety and effectiveness were fundamental criteria for decision makers, who were also concerned with increasing consistency in care and equitable access to technologies. Committee members often consider evidence that is limited in quantity and quality; however, they perceive evaluations to be rigorous and sufficient for decision making. Precise standards for safety, effective, and cost-effectiveness could not be identified. Consideration of new technologies at the state level is grounded in the desire to improve health outcomes and equity of access for patients. High quality evidence is often limited. The impact funding decisions have on population health is unclear due to limited use of cost-effectiveness analysis and unclear cost-effectiveness standards. Copyright © 2018 John Wiley & Sons, Ltd.

Factors associated with high-quality/low-cost hospital performance.

PubMed

Jiang, H Joanna; Friedman, Bernard; Begun, James W

2006-01-01

This study explores organizational and market characteristics associated with superior hospital performance in both quality and cost of care, using the Healthcare Cost and Utilization Project State Inpatient Databases for ten states in 1997 and 2001. After controlling for a variety of patient factors, we found that for-profit ownership, hospital competition, and the number of HMOs were positively associated with the likelihood of attaining high-quality/low-cost performance. Furthermore, we examined interactions between organizational and market characteristics and identified a number of significant interactions. For example, the positive likelihood associated with for-profit hospitals diminished in markets with high HMO penetration.

Development of a Whole Slide Imaging System on Smartphones and Evaluation With Frozen Section Samples

PubMed Central

Jiang, Liren

2017-01-01

Background The aim was to develop scalable Whole Slide Imaging (sWSI), a WSI system based on mainstream smartphones coupled with regular optical microscopes. This ultra-low-cost solution should offer diagnostic-ready imaging quality on par with standalone scanners, supporting both oil and dry objective lenses of different magnifications, and reasonably high throughput. These performance metrics should be evaluated by expert pathologists and match those of high-end scanners. Objective The aim was to develop scalable Whole Slide Imaging (sWSI), a whole slide imaging system based on smartphones coupled with optical microscopes. This ultra-low-cost solution should offer diagnostic-ready imaging quality on par with standalone scanners, supporting both oil and dry object lens of different magnification. All performance metrics should be evaluated by expert pathologists and match those of high-end scanners. Methods In the sWSI design, the digitization process is split asynchronously between light-weight clients on smartphones and powerful cloud servers. The client apps automatically capture FoVs at up to 12-megapixel resolution and process them in real-time to track the operation of users, then give instant feedback of guidance. The servers first restitch each pair of FoVs, then automatically correct the unknown nonlinear distortion introduced by the lens of the smartphone on the fly, based on pair-wise stitching, before finally combining all FoVs into one gigapixel VS for each scan. These VSs can be viewed using Internet browsers anywhere. In the evaluation experiment, 100 frozen section slides from patients randomly selected among in-patients of the participating hospital were scanned by both a high-end Leica scanner and sWSI. All VSs were examined by senior pathologists whose diagnoses were compared against those made using optical microscopy as ground truth to evaluate the image quality. Results The sWSI system is developed for both Android and iPhone smartphones and is currently being offered to the public. The image quality is reliable and throughput is approximately 1 FoV per second, yielding a 15-by-15 mm slide under 20X object lens in approximately 30-35 minutes, with little training required for the operator. The expected cost for setup is approximately US $100 and scanning each slide costs between US $1 and $10, making sWSI highly cost-effective for infrequent or low-throughput usage. In the clinical evaluation of sample-wise diagnostic reliability, average accuracy scores achieved by sWSI-scan-based diagnoses were as follows: 0.78 for breast, 0.88 for uterine corpus, 0.68 for thyroid, and 0.50 for lung samples. The respective low-sensitivity rates were 0.05, 0.05, 0.13, and 0.25 while the respective low-specificity rates were 0.18, 0.08, 0.20, and 0.25. The participating pathologists agreed that the overall quality of sWSI was generally on par with that produced by high-end scanners, and did not affect diagnosis in most cases. Pathologists confirmed that sWSI is reliable enough for standard diagnoses of most tissue categories, while it can be used for quick screening of difficult cases. Conclusions As an ultra-low-cost alternative to whole slide scanners, diagnosis-ready VS quality and robustness for commercial usage is achieved in the sWSI solution. Operated on main-stream smartphones installed on normal optical microscopes, sWSI readily offers affordable and reliable WSI to resource-limited or infrequent clinical users. PMID:28916508

The High Level Data Reduction Library

NASA Astrophysics Data System (ADS)

Ballester, P.; Gabasch, A.; Jung, Y.; Modigliani, A.; Taylor, J.; Coccato, L.; Freudling, W.; Neeser, M.; Marchetti, E.

2015-09-01

The European Southern Observatory (ESO) provides pipelines to reduce data for most of the instruments at its Very Large telescope (VLT). These pipelines are written as part of the development of VLT instruments, and are used both in the ESO's operational environment and by science users who receive VLT data. All the pipelines are highly specific geared toward instruments. However, experience showed that the independently developed pipelines include significant overlap, duplication and slight variations of similar algorithms. In order to reduce the cost of development, verification and maintenance of ESO pipelines, and at the same time improve the scientific quality of pipelines data products, ESO decided to develop a limited set of versatile high-level scientific functions that are to be used in all future pipelines. The routines are provided by the High-level Data Reduction Library (HDRL). To reach this goal, we first compare several candidate algorithms and verify them during a prototype phase using data sets from several instruments. Once the best algorithm and error model have been chosen, we start a design and implementation phase. The coding of HDRL is done in plain C and using the Common Pipeline Library (CPL) functionality. HDRL adopts consistent function naming conventions and a well defined API to minimise future maintenance costs, implements error propagation, uses pixel quality information, employs OpenMP to take advantage of multi-core processors, and is verified with extensive unit and regression tests. This poster describes the status of the project and the lesson learned during the development of reusable code implementing algorithms of high scientific quality.

Low cost solar array project. Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

Technical activities are reported in the design of process, facilities, and equipment for producing silicon at a rate and price comensurate with production goals for low cost solar cell modules. The silane-silicone process has potential for providing high purity poly-silicon on a commercial scale at a price of fourteen dollars per kilogram by 1986, (1980 dollars). Commercial process, economic analysis, process support research and development, and quality control are discussed.

Real-time control system for adaptive resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flath, L; An, J; Brase, J

2000-07-24

Sustained operation of high average power solid-state lasers currently requires an adaptive resonator to produce the optimal beam quality. We describe the architecture of a real-time adaptive control system for correcting intra-cavity aberrations in a heat capacity laser. Image data collected from a wavefront sensor are processed and used to control phase with a high-spatial-resolution deformable mirror. Our controller takes advantage of recent developments in low-cost, high-performance processor technology. A desktop-based computational engine and object-oriented software architecture replaces the high-cost rack-mount embedded computers of previous systems.

Flexible and Low-Cost Measurements for Space Software Development- The Measurements Exploration Framework

NASA Astrophysics Data System (ADS)

Marculescu, Bogdan; Feldt, Robert; Torkar, Richard; Green, Lars-Goran; Liljegren, Thomas; Hult, Erika

2011-08-01

Verification and validation is an important part of software development and accounts for significant amounts of the costs associated with such a project. For developers of life or mission critical systems, such as software being developed for space applications, a balance must be reached between ensuring the quality of the system by extensive and rigorous testing and reducing costs and allowing the company to compete.Ensuring the quality of any system starts with a quality development process. To evaluate both the software development process and the product itself, measurements are needed. A balance must be then struck between ensuring the best possible quality of both process and product on the one hand, and reducing the cost of performing requirements on the other.A number of measurements have already been defined and are being used. For some of these, data collection can be automated as well, further lowering costs associated with implementing them. In practice, however, there may be situations where existing measurements are unsuitable for a variety of reasons.This paper describes a framework for creating low cost, flexible measurements in areas where initial information is scarce. The framework, called The Measurements Exploration Framework, is aimed in particular at the Space Software development industry and was developed is such an environment.

The Costs of Participating in a Diabetes Quality Improvement Collaborative: Variation Among Five Clinics.

PubMed

Sathe, Neha A; Nocon, Robert S; Hughes, Brenna; Peek, Monica E; Chin, Marshall H; Huang, Elbert S

2016-01-01

Quality improvement collaboratives (QICs) support rapid testing and implementation of interventions through the collective experience of participating organizations to improve care quality and reduce costs. Although QICs have been societally cost-effective in improving the care of chronic diseases, they may not be adopted by outpatient clinics if their costs are high. Diabetes QICs warrant reexamination as secular trends in the quality of diabetes care, new care guidelines for diabetes, and evolving strategies for quality improvement may have altered implementation costs. The costs over the first four years-from June 2009 through May 2013-of an ongoing diabetes QIC were characterized by activities and over time. The QIC, linking six clinics on Chicago's South Side, tailored interventions to minority populations and built community partnerships. Costs were calculated from clinic surveys regarding activities, labor, and purchases. Data were obtained from five of the six participating clinics. Cost/diabetic patient/year ranged across clinic sites from $6 (largest clinic) to $68 (smallest clinic). Clinics spent 62%-88% of their total QIC costs on labor. The cost/diabetic patient/year changed over time from Year 1 (range across clinics, $5-$51), Year 2 ($11-$84), Year 3 ($4-$57), to Year 4 ($4-$80), with costs peaking at Year 2 for all clinics except Clinic 4, where costs peaked at Year 4. Cost experiences of QICs in clinics were di- verse over time and setting. High per-patient costs may stem from small clinic size, a sicker patient population, and variation in personnel type used. Cost decreases over time may represent increasing organizational learning and efficiency. Sharing resources may have achieved additional cost savings. This practical information can help administrators and policy makers predict, manage, and support costs of QICs as payers increasingly seek high-value health care.

Risk Analysis of Underestimate Cost Offer to The Project Quality in Aceh Province

NASA Astrophysics Data System (ADS)

Rani, Hafnidar A.

2016-11-01

The possibility of errors in the process of offer price determination could be enormous, so it can affect the possibility of project underestimate cost which can impact and reduce the profit if being implementing. Government Equipment/Service Procurement Policy Institution (LKPP) assesses that the practices of cheaper price in the government equipment/service procurement are still highly found and can be potential to decrease the project quality. This study aimed to analyze the most dominant factors happened in underestimate cost offer practice, to analyze the relationship of underestimate cost offer risk factors to road construction project quality in Aceh Province and to analyze the most potential factors of underestimate cost offer risk affecting road construction project quality in Aceh Province. Road construction projects observed the projects which have been implemented in Aceh Province since 2013 - 2015. This study conducted by interviewing Government Budget Authority (KPA), and distributing the questionnaire to the road construction contractors with the qualification of K1, K2, K3, M1, M2 and B1. Based on the data from Construction Service Development Institution (LPJK) of Aceh Province on 2016, the populations obtained are 2,717 constructors. By using Slovin Equation, the research samples obtained are 97 contractors. The most dominant factors in underestimate cost offer risk of the road construction projects in Aceh Province is Contingency Cost Factor which the mean is 4.374.

The Idaho dedicated education unit model: cost-effective, high-quality education.

PubMed

Springer, Pamela J; Johnson, Patricia; Lind, Bonnie; Walker, Eldon; Clavelle, Joanne; Jensen, Nancy

2012-01-01

Faculty face many challenges in delivering clinical education, including faculty availability, the complexity of the faculty role, and limited clinical placements. Dedicated education units (DEUs) are being explored as alternatives to traditional clinical placement models. The authors describe the successful development of a DEU that resulted in positive student outcomes at reduced cost to both the school and the medical center.

Impact of transaction costs on healthcare outcomes.

PubMed

Stiles, Renée A; So, Stephanie A

2003-06-01

This article reviews transaction cost economics to frame a discussion of how inefficiencies in healthcare delivery processes affect clinical outcomes and differentiate between inefficiencies that are tractable from those that are transitional or intractable. Recognizing and quantifying these effects improves the ability of organizations to calculate returns on investment in quality improvement, research and development and related value enhancing, but it is subject to high-risk undertakings.

Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulsh, Michael; Porter, Jason M.; Bittinat, Daniel C.

2016-04-01

Polymer electrolyte membrane fuel cells are energy conversion devices that offer high power densities and high efficiencies for mobile and other applications. Successful introduction into the marketplace requires addressing cost barriers such as production volumes and platinum loading. For cost reduction, it is vital to minimize waste and maximize quality during the manufacturing of platinum-containing electrodes, including gas diffusion electrodes (GDEs). In this work, we report on developing a quality control diagnostic for GDEs, involving creating an ex situ exothermic reaction on the electrode surface and using infrared thermography to measure the resulting temperature profile. Experiments with a moving GDEmore » containing created defects were conducted to demonstrate the applicability of the diagnostic for real-time web-line inspection.« less

Economic evaluation of major knee surgery with recombinant activated factor VII in hemophilia patients with high titer inhibitors and advanced knee arthropathy: exploratory results via literature-based modeling.

PubMed

Ballal, Rahul D; Botteman, Marc F; Foley, Isaac; Stephens, Jennifer M; Wilke, Caitlyn T; Joshi, Ashish V

2008-03-01

People with severe hemophilia suffer from frequent intra-articular hemorrhages, leading to pain, swelling, reduced flexion, and arthropathy. Elective orthopedic surgery using factor VIII (FVIII) replacement to prevent uncontrolled bleeding has been endorsed as an effective treatment option for patients with severe or advanced hemophilic arthropathy. These surgeries reduce pain, restore mobility and function, and reduce the frequency of recurrent joint bleeds. Unfortunately, some patients with hemophilia develop inhibitors to FVIII, which neutralize FVIII activity and render the use of even massive amounts of FVIII replacement ineffective and surgery very risky. For this reason, elective surgical procedures in high-titer inhibitor patients had largely been abandoned until the introduction of new agents, such as recombinant activated factor VII (rFVIIa, NovoSeven, Novo Nordisk A/S, Denmark). rFVIIa has been shown effective for prophylaxis during elective surgery and has therefore improved the feasibility of orthopedic surgery in hemophilia patients with high-titer inhibitors. The present research explored, from a modified US payer perspective, the direct economic and quality of life benefits of four different elective knee surgeries (total knee replacement [TKR], knee arthrodesis [KA], proximal tibial osteotomy, and distal femoral osteotomy) with rFVIIa coverage in hemophilia patients with high-titer inhibitors. An exploratory literature-based life-table model was developed to compare the direct medical costs and quality of life of two hypothetical cohorts of high-titer inhibitor patients with frequent bleeding episodes: one undergoing and the other not undergoing elective knee surgery. Knee surgery costs included perioperative rFVIIa costs, inpatient and rehabilitation care, and repeat procedures due to surgery failure, prosthesis loosening or deep infection. Based on efficacy studies, knee surgery was assumed to reduce mean annual bleeding episodes at the affected joint from 9.13 to 1.64. The cost of managing each bleeding episode was estimated at $15 298. Thus, by reducing bleeding episodes, surgery was expected to result in related cost offsets. All costs were expressed in 2006 US dollars. Surgery was also assumed to result in gains in quality of life by reducing pain and reducing bleeding episodes. The impact of pain reduction on quality of life and utility was estimated by simulating EQ-5D scores for a typical patient with and without knee surgery. Based on the model, average knee surgery costs are predicted to range from a low of $694 000 (for KA) to a high of $855 000 (for TKR). However, knee surgery is also expected to reduce the subsequent number of bleeding episodes and resultant costs, leading to long-term costs savings. Due to improvement in pain levels, surgical patients are expected to experience improvements in quality-adjusted life-years (QALYs). Thus, surgery appears to be the preferred strategy (i.e., saves costs and increases QALYs). Based on the assumptions used in the model, the initial cost of knee surgery was offset during the 8th and 10th years for KA and TKR, respectively, with intermediate break-even time for the other surgeries. As expected, cost savings and gains in QALYs increased over time, as well as the cost effective ness of knee surgery. Specifically, the cost per QALY with KA and TKR fell under $50 000/QALY during the 6th and 8th years, respectively, with intermediate time for the other surgeries. The present exploratory analysis is based on the long-term extrapolation of data from a small number of patients without inhibitors and short-term studies. It suggests that major knee surgery utilizing rFVIIa in hemophilia patients with inhibitors may be cost-effective on average, with expected cost savings apparent within a decade of knee surgery. The present exploratory results should be validated with real-world, longitudinal patient data.

Embedding quality improvement and patient safety at Liverpool Women's NHS Foundation Trust.

PubMed

Scholefield, Helen

2007-08-01

The provision of safe high-quality care in obstetrics and gynaecology is a key target in the UK National Health Service (NHS), in part because of the high cost of litigation in this area. Good risk management processes should improve safety and reduce the cost of litigation to the NHS. This chapter looks at structures and processes for improving quality and patient safety, using the stepwise approach described by the National Patient Safety Authority (NPSA). This encompasses building a safety culture, leading and supporting staff, integrating risk management activity, promoting reporting, involving and communicating with patients and the public, learning and sharing safety lessons, and implementing solutions to prevent harm. Examples from the Liverpool Women's NHS Foundation Trust are used to illustrate these steps, including how they were developed, what obstacles had to be overcome, ongoing challenges, and whether good risk management has translated into better, safer health care.

Toward Cost-Effective Manufacturing of Silicon Solar Cells: Electrodeposition of High-Quality Si Films in a CaCl2 -based Molten Salt.

PubMed

Yang, Xiao; Ji, Li; Zou, Xingli; Lim, Taeho; Zhao, Ji; Yu, Edward T; Bard, Allen J

2017-11-20

Electrodeposition of Si films from a Si-containing electrolyte is a cost-effective approach for the manufacturing of solar cells. Proposals relying on fluoride-based molten salts have suffered from low product quality due to difficulties in impurity control. Here we demonstrate the successful electrodeposition of high-quality Si films from a CaCl 2 -based molten salt. Soluble Si IV -O anions generated from solid SiO 2 are electrodeposited onto a graphite substrate to form a dense film of crystalline Si. Impurities in the deposited Si film are controlled at low concentrations (both B and P are less than 1 ppm). In the photoelectrochemical measurements, the film shows p-type semiconductor character and large photocurrent. A p-n junction fabricated from the deposited Si film exhibits clear photovoltaic effects. This study represents the first step to the ultimate goal of developing a cost-effective manufacturing process for Si solar cells based on electrodeposition. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Importance of Intelligence for Strategic Scenario Building: The Information Section Role in Research and Development

ERIC Educational Resources Information Center

Minamizaki, Noriko

2017-01-01

Product development of Japanese companies has changed greatly from the post-war revival period, when it was promoted mainly to provide low-cost, high-quality products. In recent years, it has become necessary to develop products and services that correspond to social issues. Research and development has shifted from a technological basis to a…

Fuzzy Logic-based expert system for evaluating cake quality of freeze-dried formulations.

PubMed

Trnka, Hjalte; Wu, Jian X; Van De Weert, Marco; Grohganz, Holger; Rantanen, Jukka

2013-12-01

Freeze-drying of peptide and protein-based pharmaceuticals is an increasingly important field of research. The diverse nature of these compounds, limited understanding of excipient functionality, and difficult-to-analyze quality attributes together with the increasing importance of the biosimilarity concept complicate the development phase of safe and cost-effective drug products. To streamline the development phase and to make high-throughput formulation screening possible, efficient solutions for analyzing critical quality attributes such as cake quality with minimal material consumption are needed. The aim of this study was to develop a fuzzy logic system based on image analysis (IA) for analyzing cake quality. Freeze-dried samples with different visual quality attributes were prepared in well plates. Imaging solutions together with image analytical routines were developed for extracting critical visual features such as the degree of cake collapse, glassiness, and color uniformity. On the basis of the IA outputs, a fuzzy logic system for analysis of these freeze-dried cakes was constructed. After this development phase, the system was tested with a new screening well plate. The developed fuzzy logic-based system was found to give comparable quality scores with visual evaluation, making high-throughput classification of cake quality possible. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany

PubMed Central

2012-01-01

The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the “one hospital” approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the “one hospital” model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital’s cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level. PMID:22935314

Assessing DRG cost accounting with respect to resource allocation and tariff calculation: the case of Germany.

PubMed

Vogl, Matthias

2012-08-30

The purpose of this paper is to analyze the German diagnosis related groups (G-DRG) cost accounting scheme by assessing its resource allocation at hospital level and its tariff calculation at national level. First, the paper reviews and assesses the three steps in the G-DRG resource allocation scheme at hospital level: (1) the groundwork; (2) cost-center accounting; and (3) patient-level costing. Second, the paper reviews and assesses the three steps in G-DRG national tariff calculation: (1) plausibility checks; (2) inlier calculation; and (3) the "one hospital" approach. The assessment is based on the two main goals of G-DRG introduction: improving transparency and efficiency. A further empirical assessment attests high costing quality. The G-DRG cost accounting scheme shows high system quality in resource allocation at hospital level, with limitations concerning a managerially relevant full cost approach and limitations in terms of advanced activity-based costing at patient-level. However, the scheme has serious flaws in national tariff calculation: inlier calculation is normative, and the "one hospital" model causes cost bias, adjustment and representativeness issues. The G-DRG system was designed for reimbursement calculation, but developed to a standard with strategic management implications, generalized by the idea of adapting a hospital's cost structures to DRG revenues. This combination causes problems in actual hospital financing, although resource allocation is advanced at hospital level.

Application of travel time information for traffic management : technical summary.

DOT National Transportation Integrated Search

2012-01-01

Using conventional methods, it is extremely costly to measure detailed traffic characteristics in high quality spatial or temporal resolution. For analyzing travel characteristics on roadways, the floating car method, developed in the 1920s, has hist...

Kaiser Permanente implant registries benefit patient safety, quality improvement, cost-effectiveness.

PubMed

Paxton, Elizabeth W; Kiley, Mary-Lou; Love, Rebecca; Barber, Thomas C; Funahashi, Tadashi T; Inacio, Maria C S

2013-06-01

In response to the increased volume, risk, and cost of medical devices, in 2001 Kaiser Permanente (KP) developed implant registries to enhance patient safety and quality, and to evaluate cost-effectiveness. Using an integrated electronic health record system, administrative databases, and other institutional databases, orthopedic, cardiology, and vascular implant registries were developed in 2001, 2006, and 2011, respectively. These registries monitor patients, implants, clinical practices, and surgical outcomes for KP's 9 million members. Critical to registry success is surgeon leadership and engagement; each geographical region has a surgeon champion who provides feedback on registry initiatives and disseminates registry findings. The registries enhance patient safety by providing a variety of clinical decision tools such as risk calculators, quality reports, risk-adjusted medical center reports, summaries of surgeon data, and infection control reports to registry stakeholders. The registries are used to immediately identify patients with recalled devices, evaluate new and established device technology, and identify outlier implants. The registries contribute to cost-effectiveness initiatives through collaboration with sourcing and contracting groups and confirming adherence to device formulary guidelines. Research studies based on registry data have directly influenced clinical best practices. Registries are important tools to evaluate longitudinal device performance and safety, study the clinical indications for and outcomes of device implantation, respond promptly to recalls and advisories, and contribute to the overall high quality of care of our patients.

The Role of Inflation and Price Escalation Adjustments in Properly Estimating Program Costs: F-35 Case Study

DTIC Science & Technology

2016-04-30

costs of new defense systems. An inappropriate price index can introduce errors in both development of cost estimating relationships ( CERs ) and in...indexes derived from CERs . These indexes isolate changes in price due to factors other than changes in quality over time. We develop a “Baseline” CER ...The hedonic index application has commonalities with cost estimating relationships ( CERs ), which also model system costs as a function of quality

[Audiovisual telecommunication by multimedia technology in HNO medicine. ISDN--internet--ATM].

PubMed

Plinkert, P K; Plinkert, B; Kurek, R; Zenner, H P

2000-11-01

Telemedicine includes all medical activities in diagnosis, therapeutics, or social medicine undertaken by means of an electronic transfer medium, enabling the transmission of visual and acoustic information over long distances to doctors not personally present at the place of the requested consultation. Most experience with telemedicine applications has been gained in the field of diagnosis (teleconsultation, teleradiology, telepathology) and is expanding to quality control and quality assurance. Decisive for each form of application is its availability, practicability, cost, safety, and especially quality of audiovisual transmission. For telesurgical applications, particularly the use of minimally invasive techniques in otorhinolaryngology, head, and neck surgery, the high quality transmission of audiovisual data in real time is necessary. Rapid expansion and further developments in transmission technologies and networks in the last decade have created several technologies with increased quality and costs. In this paper, we tested different transmission media for audiovisual telecommunication--integrated services digital network (ISDN), Internet, and asynchronous transfer mode (ATM)--using real time video transmission of typical operations in otorhinolaryngology. Their applications, costs, and future perspectives are discussed.

Producing gallium arsenide crystals in space

NASA Technical Reports Server (NTRS)

Randolph, R. L.

1984-01-01

The production of high quality crystals in space is a promising near-term application of microgravity processing. Gallium arsenide is the selected material for initial commercial production because of its inherent superior electronic properties, wide range of market applications, and broad base of on-going device development effort. Plausible product prices can absorb the high cost of space transportation for the initial flights provided by the Space Transportation System. The next step for bulk crystal growth, beyond the STS, is planned to come later with the use of free flyers or a space station, where real benefits are foreseen. The use of these vehicles, together with refinement and increasing automation of space-based crystal growth factories, will bring down costs and will support growing demands for high quality GaAs and other specialty electronic and electro-optical crystals grown in space.

Development of a high-throughput SNP resource to advance genomic, genetic and breeding research in carrot (Daucus carota L.)

USDA-ARS?s Scientific Manuscript database

The rapid advancement in high-throughput SNP genotyping technologies along with next generation sequencing (NGS) platforms has decreased the cost, improved the quality of large-scale genome surveys, and allowed specialty crops with limited genomic resources such as carrot (Daucus carota) to access t...

Industrial pollution and the management of river water quality: a model of Kelani River, Sri Lanka.

PubMed

Gunawardena, Asha; Wijeratne, E M S; White, Ben; Hailu, Atakelty; Pandit, Ram

2017-08-19

Water quality of the Kelani River has become a critical issue in Sri Lanka due to the high cost of maintaining drinking water standards and the market and non-market costs of deteriorating river ecosystem services. By integrating a catchment model with a river model of water quality, we developed a method to estimate the effect of pollution sources on ambient water quality. Using integrated model simulations, we estimate (1) the relative contribution from point (industrial and domestic) and non-point sources (river catchment) to river water quality and (2) pollutant transfer coefficients for zones along the lower section of the river. Transfer coefficients provide the basis for policy analyses in relation to the location of new industries and the setting of priorities for industrial pollution control. They also offer valuable information to design socially optimal economic policy to manage industrialized river catchments.

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

DOE PAGES

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; ...

2017-06-12

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. Here, this article discusses three major aspects formore » cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.« less

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. Here, this article discusses three major aspects formore » cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.« less

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; AN, Seong Jin; David, Lamuel Abraham; Hays, Kevin; Wood, Marissa; Phillip, Nathan D.; Sheng, Yangping; Mao, Chengyu; Kalnaus, Sergiy; Daniel, Claus; Wood, David L.

2017-09-01

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by 70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eshraghi, Ray

In September 2008, the U.S. Department of Energy and Martin County Economic Development Corporation entered into an agreement to further the advancement of a microtubular PEM fuel cell developed by Microcell Corporation. The overall focus of this project was on research and development related to high volume manufacturing of fuel cells and cost reduction in the fuel cell manufacturing process. The extrusion process used for the microfiber fuel cells in this project is inherently a low cost, high volume, high speed manufacturing process. In order to take advantage of the capabilities that the extrusion process provides, all subsequent manufacturing processesmore » must be enhanced to meet the extrusion line’s speed and output. Significant research and development was completed on these subsequent processes to ensure that power output and performance were not negatively impacted by the higher speeds, design changes and process improvements developed in this project. All tasks were successfully completed resulting in cost reductions, performance improvements and process enhancements in the areas of speed and quality. These results support the Department of Energy’s goal of fuel cell commercialization.« less

Developments in holographic-based scanner designs

NASA Astrophysics Data System (ADS)

Rowe, David M.

1997-07-01

Holographic-based scanning systems have been used for years in the high resolution prepress markets where monochromatic lasers are generally utilized. However, until recently, due to the dispersive properties of holographic optical elements (HOEs), along with the high cost associated with recording 'master' HOEs, holographic scanners have not been able to penetrate major scanning markets such as the laser printer and digital copier markets, low to mid-range imagesetter markets, and the non-contact inspection scanner market. Each of these markets has developed cost effective laser diode based solutions using conventional scanning approaches such as polygon/f-theta lens combinations. In order to penetrate these markets, holographic-based systems must exhibit low cost and immunity to wavelength shifts associated with laser diodes. This paper describes recent developments in the design of holographic scanners in which multiple HOEs, each possessing optical power, are used in conjunction with one curved mirror to passively correct focal plane position errors and spot size changes caused by the wavelength instability of laser diodes. This paper also describes recent advancements in low cost production of high quality HOEs and curved mirrors. Together these developments allow holographic scanners to be economically competitive alternatives to conventional devices in every segment of the laser scanning industry.

Understanding and development of manufacturable screen-printed contacts on high sheet-resistance emitters for low-cost silicon solar cells

NASA Astrophysics Data System (ADS)

Hilali, Mohamed M.

2005-11-01

A simple cost-effective approach was proposed and successfully employed to fabricate high-quality screen-printed (SP) contacts to high sheet-resistance emitters (100 O/sq) to improve the Si solar cell efficiency. Device modeling was used to quantify the performance enhancement possible from the high sheet-resistance emitter for various cell designs. It was found that for performance enhancement from the high sheet-resistance emitter, certain cell design criteria must be satisfied. Model calculations showed that in order to achieve any performance enhancement over the conventional ˜40 O/sq emitter, the high sheet resistance emitter solar cell must have a reasonably good (<120,000 cm/s) or low front-surface recombination velocity (FSRV). Model calculations were also performed to establish requirements for high fill factors (FFs). The results showed that the series resistance should be less than 0.8 O-cm2, the shunt resistance should be greater than 1000 O-cm2, and the junction leakage current should be less than 25 nA/cm2. Analytical microscopy and surface analysis techniques were used to study the Ag-Si contact interface of different SP Ag pastes. Physical and electrical properties of SP Ag thick-film contacts were studied and correlated to understand and achieve good-quality ohmic contacts to high sheet-resistance emitters for solar cells. This information was then used to define the criteria for high-quality screen-printed contacts. The role of paste constituents and firing scheme on contact quality were investigated to tailor the high-quality screen-printed contact interface structure that results in high performance solar cells. Results indicated that small particle size, high glass transition temperature, rapid firing and less aggressive glass frit help in producing high-quality contacts. Based on these results high-quality SP contacts with high FFs > 0.78 on high sheet-resistance emitters were achieved for the first time using a simple single-step firing process. This technology was applied to different substrates (monocrystalline and multicrystalline) and surfaces (textured and planar). Cell efficiencies of ˜16.2% on low-cost EFG ribbon substrates were achieved on high sheet-resistance emitters with SP contacts. A record high-efficiency SP solar cell of 19% with textured high sheet-resistance emitter was also fabricated and modeled.

Cost-utility analysis of dasatinib and nilotinib in patients with chronic myeloid leukemia refractory to first-line treatment with imatinib in Thailand.

PubMed

Kulpeng, Wantanee; Sompitak, Sumalai; Jootar, Saengsuree; Chansung, Kanchana; Teerawattananon, Yot

2014-04-01

Recently, the second-generation tyrosine kinase inhibitors dasatinib and nilotinib have emerged as alternative treatments in patients with chronic myeloid leukemia (CML) who are resistant to or intolerant of imatinib. This article aimed to assess the cost utility and budget impact of using dasatinib or nilotinib, rather than high-dose (800-mg/d) imatinib, in patients with chronic phase (CP) CML who are resistant to standard-dose (400-mg/d) imatinib in Thailand. A Markov simulation model was developed and used to estimate the lifetime costs and outcomes of treating patients aged ≥38 years with CP-CML. The efficacy parameters were synthesized from a systematic review. Utilities using the European Quality of Life-5 Dimensions tool and costs were obtained from the Thai CML population. Costs and outcomes were compared and presented as the incremental cost-effectiveness ratio in 2011 Thai baht (THB) per quality-adjusted life year (QALY) gained. One-way and probabilistic sensitivity analyses were performed to estimate parameter uncertainty. From a societal perspective, treatment with dasatinib was found to yield more QALYs (2.13) at a lower cost (THB 1,631,331) per person than high-dose imatinib. Nilotinib treatment was also found to be more cost-effective than high-dose imatinib, producing an incremental cost-effectiveness ratio of THB 83,328 per QALY gained. This treatment option also resulted in the highest number of QALYs gained of all of the treatment options. The costs of providing dasatinib, nilotinib, and high-dose imatinib were estimated at THB 5 billion, THB 6 billion, and THB 7 billion, respectively. Treatment with dasatinib or nilotinib is likely to be more cost-effective than treatment with high-dose imatinib in CP-CML patients who do not respond positively to standard-dose imatinib in the Thai context. Dasatinib was found to be more cost-effective than nilotinib. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

Ultrasmooth Quantum Dot Micropatterns by a Facile Controllable Liquid-Transfer Approach: Low-Cost Fabrication of High-Performance QLED.

PubMed

Zhang, Min; Hu, Binbin; Meng, Lili; Bian, Ruixin; Wang, Siyuan; Wang, Yunjun; Liu, Huan; Jiang, Lei

2018-06-26

Fabrication of a high quality quantum dot (QD) film is essentially important for a high-performance QD light emitting diode display (QLED) device. It is normally a high-cost and multiple-step solution-transfer process where large amounts of QDs were needed but with only limited usefulness. Thus, developing a simple, efficient, and low-cost approach to fabricate high-quality micropatterned QD film is urgently needed. Here, we proposed that the Chinese brush enables the controllable transfer of a QD solution directly onto a homogeneous and ultrasmooth micropatterned film in one step. It is proposed that the dynamic balance of QDs was enabled during the entire solution transfer process under the cooperative effect of Marangoni flow aroused by the asymmetric solvent evaporation and the Laplace pressure different by conical fibers. By this approach, QD nanoparticles were homogeneously transferred onto the desired area on the substrate. The as-prepared QLED devices show rather high performances with the current efficiencies of 72.38, 26.03, and 4.26 cd/A and external quantum efficiencies of 17.40, 18.96, and 6.20% for the green, red, and blue QLED devices, respectively. We envision that the result offers a low-cost, facile, and practically applicable solution-processing approach that works even in air for fabricating high-performance QLED devices.

Contoured Orifice for Silicon-Ribbon Die

NASA Technical Reports Server (NTRS)

Mackintosh, B. H.

1985-01-01

Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

Cost effectiveness of novel oral anticoagulants for stroke prevention in atrial fibrillation depending on the quality of warfarin anticoagulation control.

PubMed

Janzic, Andrej; Kos, Mitja

2015-04-01

Vitamin K antagonists, such as warfarin, are standard treatments for stroke prophylaxis in patients with atrial fibrillation. Patient outcomes depend on quality of warfarin management, which includes regular monitoring and dose adjustments. Recently, novel oral anticoagulants (NOACs) that do not require regular monitoring offer an alternative to warfarin. The aim of this study was to evaluate whether cost effectiveness of NOACs for stroke prevention in atrial fibrillation depends on the quality of warfarin control. We developed a Markov decision model to simulate warfarin treatment outcomes in relation to the quality of anticoagulation control, expressed as percentage of time in the therapeutic range (TTR). Standard treatment with adjusted-dose warfarin and improved anticoagulation control by genotype-guided dosing were compared with dabigatran, rivaroxaban, apixaban and edoxaban. The analysis was performed from the Slovenian healthcare payer perspective using 2014 costs. In the base case, the incremental cost-effectiveness ratio for apixaban, dabigatran and edoxaban was below the threshold of €25,000 per quality-adjusted life-years compared with adjusted-dose warfarin with a TTR of 60%. The probability that warfarin was a cost-effective option was around 1%. This percentage rises as the quality of anticoagulation control improves. At a TTR of 70%, warfarin was the preferred treatment in half the iterations. The cost effectiveness of NOACs for stroke prevention in patients with nonvalvular atrial fibrillation who are at increased risk for stroke is highly sensitive to warfarin anticoagulation control. NOACs are more likely to be cost-effective options in settings with poor warfarin management than in settings with better anticoagulation control, where they may not represent good value for money.

Economic impact of medication non-adherence by disease groups: a systematic review

PubMed Central

Fernandez-Llimos, Fernando; Frommer, Michael; Benrimoj, Charlie; Garcia-Cardenas, Victoria

2018-01-01

Objective To determine the economic impact of medication non-adherence across multiple disease groups. Design Systematic review. Evidence review A comprehensive literature search was conducted in PubMed and Scopus in September 2017. Studies quantifying the cost of medication non-adherence in relation to economic impact were included. Relevant information was extracted and quality assessed using the Drummond checklist. Results Seventy-nine individual studies assessing the cost of medication non-adherence across 14 disease groups were included. Wide-scoping cost variations were reported, with lower levels of adherence generally associated with higher total costs. The annual adjusted disease-specific economic cost of non-adherence per person ranged from $949 to $44 190 (in 2015 US$). Costs attributed to ‘all causes’ non-adherence ranged from $5271 to $52 341. Medication possession ratio was the metric most used to calculate patient adherence, with varying cut-off points defining non-adherence. The main indicators used to measure the cost of non-adherence were total cost or total healthcare cost (83% of studies), pharmacy costs (70%), inpatient costs (46%), outpatient costs (50%), emergency department visit costs (27%), medical costs (29%) and hospitalisation costs (18%). Drummond quality assessment yielded 10 studies of high quality with all studies performing partial economic evaluations to varying extents. Conclusion Medication non-adherence places a significant cost burden on healthcare systems. Current research assessing the economic impact of medication non-adherence is limited and of varying quality, failing to provide adaptable data to influence health policy. The correlation between increased non-adherence and higher disease prevalence should be used to inform policymakers to help circumvent avoidable costs to the healthcare system. Differences in methods make the comparison among studies challenging and an accurate estimation of true magnitude of the cost impossible. Standardisation of the metric measures used to estimate medication non-adherence and development of a streamlined approach to quantify costs is required. PROSPERO registration number CRD42015027338. PMID:29358417

[Quality assurance in dentistry--past, present and future].

PubMed

Vered, Y; Schwartz, N; Babayoff, I

2003-01-01

Quality assurance involves the cycle of quality assessment, formal identification of problems, developing a strategy for resolving problems and implementation of changes. Historically, the term "first do not harm" can be considered as the first step in quality assurance. Patients' high expectations from the outcomes of dental treatment, new technology and cost containment changed the perspectives completely. We are facing a new era of an increasing demand for patients' involvement as well as an increasing demand for accountability of the members of the profession. The article describes the development of the issue of quality assurance during the last thirty years and highlights the difficulties encountered by the profession in adjusting the changes due to lack of education, experience, knowledge and absence of a definition for accepted criteria for action. Developing criteria for appropriateness of dental treatment, developing mechanisms for assessing the art of care, development of large data bases and development of consumers' surveys are some of the leading suggestions for future action. The responsibility for quality and quality assurance lies in the hands of the dental profession. Organized dentistry possesses a social and ethical commitment for the society, as well as professional obligation for the members of the profession. Although cost containment gave rise to the issue of quality, quality assurance should not be measured in financial terms, but in terms of accepting responsibility and working for continuous improvement. Steps in the right direction will, hopefully, lead to a better and more efficient utilization of the available resources and will increase the trust of the public in the profession of dentistry. Therefore, organized dentistry should not leave this important issue to be dealt by non-dental professions or commercial organizations.

Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

PubMed

Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

2010-02-01

Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

Quantification of the effects of quality investment on the Cost of Poor Quality: A quasi-experimental study

NASA Astrophysics Data System (ADS)

Tamimi, Abdallah Ibrahim

Quality management is a fundamental challenge facing businesses. This research attempted to quantify the effect of quality investment on the Cost of Poor Quality (COPQ) in an aerospace company utilizing 3 years of quality data at United Launch Alliance, a Boeing -- Lockheed Martin Joint Venture Company. Statistical analysis tools, like multiple regressions, were used to quantify the relationship between quality investments and COPQ. Strong correlations were evident by the high correlation coefficient R2 and very small p-values in multiple regression analysis. The models in the study helped produce an Excel macro that based on preset constraints, optimized the level of quality spending to minimize COPQ. The study confirmed that as quality investments were increased, the COPQ decreased steadily until a point of diminishing return was reached. The findings may be used to develop an approach to reduce the COPQ and enhance product performance. Achieving superior quality in rocket launching enhances the accuracy, reliability, and mission success of delivering satellites to their precise orbits in pursuit of knowledge, peace, and freedom while assuring safety for the end user.

Development of an environmental chamber for evaluating the performance of low-cost air quality sensors under controlled conditions

NASA Astrophysics Data System (ADS)

Papapostolou, Vasileios; Zhang, Hang; Feenstra, Brandon J.; Polidori, Andrea

2017-12-01

A state-of-the-art integrated chamber system has been developed for evaluating the performance of low-cost air quality sensors. The system contains two professional grade chamber enclosures. A 1.3 m3 stainless-steel outer chamber and a 0.11 m3 Teflon-coated stainless-steel inner chamber are used to create controlled aerosol and gaseous atmospheres, respectively. Both chambers are temperature and relative humidity controlled with capability to generate a wide range of environmental conditions. The system is equipped with an integrated zero-air system, an ozone and two aerosol generation systems, a dynamic dilution calibrator, certified gas cylinders, an array of Federal Reference Method (FRM), Federal Equivalent Method (FEM), and Best Available Technology (BAT) reference instruments and an automated control and sequencing software. Our experiments have demonstrated that the chamber system is capable of generating stable and reproducible aerosol and gas concentrations at low, medium, and high levels. This paper discusses the development of the chamber system along with the methods used to quantitatively evaluate sensor performance. Considering that a significant number of academic and research institutions, government agencies, public and private institutions, and individuals are becoming interested in developing and using low-cost air quality sensors, it is important to standardize the procedures used to evaluate their performance. The information discussed herein provides a roadmap for entities who are interested in characterizing air quality sensors in a rigorous, systematic and reproducible manner.

The clinical effectiveness and cost-effectiveness of clinical nurse specialist-led hospital to home transitional care: a systematic review.

PubMed

Bryant-Lukosius, Denise; Carter, Nancy; Reid, Kim; Donald, Faith; Martin-Misener, Ruth; Kilpatrick, Kelley; Harbman, Patricia; Kaasalainen, Sharon; Marshall, Deborah; Charbonneau-Smith, Renee; DiCenso, Alba

2015-10-01

Clinical nurse specialists (CNSs) are major providers of transitional care. This paper describes a systematic review of randomized controlled trials (RCTs) evaluating the clinical effectiveness and cost-effectiveness of CNS transitional care. We searched 10 electronic databases, 1980 to July 2013, and hand-searched reference lists and key journals for RCTs that evaluated health system outcomes of CNS transitional care. Study quality was assessed using the Cochrane Risk of Bias and Quality of Health Economic Studies tools. The quality of evidence for individual outcomes was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) tool. We pooled data for similar outcomes. Thirteen RCTs of CNS transitional care were identified (n = 2463 participants). The studies had low (n = 3), moderate (n = 8) and high (n = 2) risk of bias and weak economic analyses. Post-cancer surgery, CNS care was superior in reducing patient mortality. For patients with heart failure, CNS care delayed time to and reduced death or re-hospitalization, improved treatment adherence and patient satisfaction, and reduced costs and length of re-hospitalization stay. For elderly patients and caregivers, CNS care improved caregiver depression and reduced re-hospitalization, re-hospitalization length of stay and costs. For high-risk pregnant women and very low birthweight infants, CNS care improved infant immunization rates and maternal satisfaction with care and reduced maternal and infant length of hospital stay and costs. There is low-quality evidence that CNS transitional care improves patient health outcomes, delays re-hospitalization and reduces hospital length of stay, re-hospitalization rates and costs. Further research incorporating robust economic evaluation is needed. © 2015 John Wiley & Sons, Ltd.

Cost characteristics of tilt-rotor, conventional air and high speed rail short-haul intercity passenger service

NASA Technical Reports Server (NTRS)

Schoendorfer, David L.; Morlok, Edward K.

1985-01-01

The cost analysis done to support an assessment of the potential for a small tilt-rotor aircraft to operate in short-haul intercity passenger service is described in detail. Anticipated costs of tilt-rotor air service were compared to the costs of two alternatives: conventional air and high speed rail (HSR). Costs were developed for corridor service, varying key market characteristics including distance, passenger volumes, and minimum frequency standards. The resulting cost vs output information can then be used to compare modal costs for essentially identical service quality and passenger volume or for different service levels and volumes for each mode, as appropriate. Extensive sensitivity analyses are performed. The cost-output features of these technologies are compared. Tilt-rotor is very attractive compared to HSR in terms of costs over the entire range of volume. It also has costs not dramatically different from conventional air, but tilt-rotor costs are generally higher. Thus some of its other advantages, such as the VTOL capability, must offset the cost disadvantage for it to be a preferred or competitive mode in any given market. These issues are addressed in the companion report which considers strategies for tilt-rotor development in commercial air service.

Space Science

NASA Image and Video Library

1999-04-01

NASA's Space Optics Manufacturing Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies for the NASA program in the 21st century - including the long-term goal of imaging Earth-like planets in distant solar systems. To reduce the cost of mirror fabrication, Marshall Space Flight Center (MSFC) has developed replication techniques, the machinery, and materials to replicate electro-formed nickel mirrors. The process allows fabricating precisely shaped mandrels to be used and reused as masters for replicating high-quality mirrors. Image shows Dr. Alan Shapiro cleaning mirror mandrel to be applied with highly reflective and high-density coating in the Large Aperture Coating Chamber, MFSC Space Optics Manufacturing Technology Center (SOMTC).

Percutaneous Ventricular Assist Devices: A Health Technology Assessment.

PubMed

2017-01-01

Percutaneous coronary intervention (PCI)-using a catheter to place a stent to keep blood vessels open-is increasingly used for high-risk patients who cannot undergo surgery. Cardiogenic shock (when the heart suddenly cannot pump enough blood) is associated with a high mortality rate. The percutaneous ventricular assist device can help control blood pressure and increase blood flow in these high-risk conditions. This health technology assessment examined the benefits, harms, and budget impact of the Impella percutaneous ventricular assist device in high-risk PCI and cardiogenic shock. We also analyzed cost-effectiveness of the Impella device in high-risk PCI. We performed a systematic search of the literature for studies examining the effects of the Impella percutaneous ventricular assist device in high-risk PCI and cardiogenic shock, and appraised the evidence according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria, focusing on hemodynamic stability, mortality, major adverse cardiac events, bleeding, and vascular complications. We developed a Markov decision-analytical model to assess the cost- effectiveness of Impella devices versus intra-aortic balloon pumps (IABPs), calculated incremental cost-effectiveness ratios (ICERs) using a 10-year time horizon, and conducted sensitivity analyses to examine the robustness of the estimates. The economic model was conducted from the perspective of the Ontario Ministry of Health and Long-Term Care. Eighteen studies (one randomized controlled trial and 10 observational studies for high-risk PCI, and one randomized controlled trial and six observational studies for cardiogenic shock) were included in the clinical review. Compared with IABPs, Impella 2.5, one model of the device, improved hemodynamic parameters (GRADE low-very low) but showed no significant difference in mortality (GRADE low), major adverse cardiac events (GRADE low), bleeding (GRADE low), or vascular complications (GRADE low) in high-risk PCI and cardiogenic shock. No randomized controlled trials or prospective observational studies with a control group have studied Impella CP and Impella 5.0 (other models of the device) in patients undergoing high-risk PCI or patients with cardiogenic shock. The economic model predicted that treatment with the Impella device would have fewer quality-adjusted life-years (QALYs) and higher costs than IABP in high-risk PCI patients. These observations were consistent even when uncertainty in model inputs and parameters was considered. We estimated that adopting Impella would increase costs by $2.9 to $11.5 million per year. On the basis of evidence of low to very low quality, Impella 2.5 devices were associated with improved hemodynamic stability, but had mortality rates and safety profile similar to IABPs in high-risk PCI and cardiogenic shock. Our cost-effectiveness analysis indicated that Impella 2.5 is likely associated with greater costs and fewer quality-adjusted life years than IABP.

Low cost silicon solar array project silicon materials task

NASA Technical Reports Server (NTRS)

1977-01-01

A program was established to develop a high temperature silicon production process using existing electric arc heater technology. Silicon tetrachloride and a reductant will be injected into an arc heated mixture of hydrogen and argon. Under these high temperature conditions, a very rapid reaction is expected to occur and proceed essentially to completion, yielding silicon and gaseous sodium chloride. Techniques for high temperature separation and collection of the molten silicon will be developed using standard engineering approaches, and the salt vapor will later be electrolytically separated into its elemental constituents for recycle. Preliminary technical evaluations and economic projections indicate not only that this process appears to be feasible, but that it also has the advantages of rapid, high capacity production of good quality molten silicon at a nominal cost.

British Thoracic Society quality standards for home oxygen use in adults

PubMed Central

Suntharalingam, Jay; Wilkinson, Tom; Annandale, Joseph; Davey, Claire; Fielding, Rhea; Freeman, Daryl; Gibbons, Michael; Hardinge, Maxine; Hippolyte, Sabrine; Knowles, Vikki; Lee, Cassandra; MacNee, William; Pollington, Jacqueline; Vora, Vandana; Watts, Trefor; Wijesinghe, Meme

2017-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for home oxygen provision in the UK, together with measurable markers of good practice. Quality statements are based on the British Thoracic Society (BTS) Guideline for Home Oxygen Use in Adults. Methods Development of BTS Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 10 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for home oxygen use, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for home oxygen use in adults form a key part of the range of supporting materials that the society produces to assist in the dissemination and implementation of a guideline’s recommendations. PMID:29018527

A combined geostatistical-optimization model for the optimal design of a groundwater quality monitoring network

NASA Astrophysics Data System (ADS)

Kolosionis, Konstantinos; Papadopoulou, Maria P.

2017-04-01

Monitoring networks provide essential information for water resources management especially in areas with significant groundwater exploitation due to extensive agricultural activities. In this work, a simulation-optimization framework is developed based on heuristic optimization methodologies and geostatistical modeling approaches to obtain an optimal design for a groundwater quality monitoring network. Groundwater quantity and quality data obtained from 43 existing observation locations at 3 different hydrological periods in Mires basin in Crete, Greece will be used in the proposed framework in terms of Regression Kriging to develop the spatial distribution of nitrates concentration in the aquifer of interest. Based on the existing groundwater quality mapping, the proposed optimization tool will determine a cost-effective observation wells network that contributes significant information to water managers and authorities. The elimination of observation wells that add little or no beneficial information to groundwater level and quality mapping of the area can be obtain using estimations uncertainty and statistical error metrics without effecting the assessment of the groundwater quality. Given the high maintenance cost of groundwater monitoring networks, the proposed tool could used by water regulators in the decision-making process to obtain a efficient network design that is essential.

24 CFR 968.112 - Eligible costs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... architecture of the surrounding community by including amenities, quality materials and design and landscaping... development costs. Eligible costs include job training for residents and resident business development... resident-owned businesses for modernization work. (iii) Resident management costs. Eligible costs include...

Design optimization for cost and quality: The robust design approach

NASA Technical Reports Server (NTRS)

Unal, Resit

1990-01-01

Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

The interaction between reproductive cost and individual quality is mediated by oceanic conditions in a long-lived bird.

PubMed

Robert, Alexandre; Paiva, Vitor H; Bolton, Mark; Jiguet, Frédéric; Bried, Joël

2012-08-01

Environmental variability, costs of reproduction, and heterogeneity in individual quality are three important sources of the temporal and interindividual variations in vital rates of wild populations. Based on an 18-year monitoring of an endangered, recently described, long-lived seabird, Monteiro's Storm-Petrel (Oceanodroma monteiroi), we designed multistate survival models to separate the effects of the reproductive cost (breeders vs. nonbreeders) and individual quality (successful vs. unsuccessful breeders) in relation to temporally variable demographic and oceanographic properties. The analysis revealed a gradient of individual quality from nonbreeders, to unsuccessful breeders, to successful breeders. The survival rates of unsuccessful breeders (0.90 +/- 0.023, mean +/- SE) tended to decrease in years of high average breeding success and were more sensitive to oceanographic variation than those of both (high-quality) successful breeders (0.97 +/- 0.015) and (low-quality) nonbreeders (0.83 +/- 0.028). Overall, our results indicate that reproductive costs act on individuals of intermediate quality and are mediated by environmental harshness.

Assessing the Implementation and Cost of High Quality Early Care and Education: A Review of the Literature. OPRE Report 2016-31

ERIC Educational Resources Information Center

Caronongan, Pia; Kirby, Gretchen; Boller, Kimberly; Modlin, Emily; Lyskawa, Julia

2016-01-01

This report summarizes the findings of a literature review conducted as part of the Assessing the Implementation and Cost of High-Quality Early Care and Education (ECE-ICHQ) project. The project's goal is to create a technically sound and feasible instrument that will provide consistent, systematic measures of the implementation and costs of…

Hard X-ray Optics Technology Development for Astronomy at the Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Gubarev, Mikhail; Ramsey, Brian; Kilaru, Kiranmayee

2009-01-01

Grazing-incidence telescopes based on Wolter 1 geometry have delivered impressive advances in astrophysics at soft-x-ray wavelengths, while the hard xray region remains relatively unexplored at fine angular resolution and high sensitivities. The ability to perform ground-breaking science in the hard-x-ray energy range had been the motivation for technology developments aimed at fabricating low-cost, light-weight, high-quality x-ray mirrors. Grazing-incidence x-ray optics for high-energy astrophysical applications is being developed at MSFC using the electroform-nickel replication process.

The Costs of Participating in a Diabetes Quality Improvement Collaborative: Variation Among Five Clinics

PubMed Central

Sathe, Neha A.; Nocon, Robert S.; Hughes, Brenna; Peek, Monica E.; Chin, Marshall H.; Huang, Elbert S.

2016-01-01

Article-at-a-Glance Background Quality improvement collaboratives (QICs) support rapid testing and implementation of interventions through the collective experience of participating organizations to improve care quality and reduce costs. Although QICs have been societally cost-effective in improving the care of chronic diseases, they may not be adopted by outpatient clinics if their costs are high. Diabetes QICs warrant reexamination as secular trends in the quality of diabetes care, new care guidelines for diabetes, and evolving strategies for quality improvement may have altered implementation costs. Methods The costs over the first four years—from June 2009 through May 2013—of an ongoing diabetes QIC were characterized by activities and over time. The QIC, linking six clinics on Chicago’s South Side, tailored interventions to minority populations and built community partnerships. Costs were calculated from clinic surveys regarding activities, labor, and purchases. Results Data were obtained from five of the six participating clinics. Cost/diabetic patient/year ranged across clinic sites from $6 (largest clinic) to $68 (smallest clinic). Clinics spent 62%–88% of their total QIC costs on labor. The cost/diabetic patient/year changed over time from Year 1 (range across clinics, $5–$51), Year 2 ($11–$84), Year 3 ($4–$57), to Year 4 ($4–$80), with costs peaking at Year 2 for all clinics except Clinic 4, where costs peaked at Year 4. Discussion Cost experiences of QICs in clinics were diverse over time and setting. High per-patient costs may stem from small clinic size, a sicker patient population, and variation in personnel type used. Cost decreases over time may represent increasing organizational learning and efficiency. Sharing resources may have achieved additional cost savings. This practical information can help administrators and policy makers predict, manage, and support costs of QICs as payers increasingly seek high-value health care. PMID:26685930

Improving Diabetes care through Examining, Advising, and prescribing (IDEA): protocol for a theory-based cluster randomised controlled trial of a multiple behaviour change intervention aimed at primary healthcare professionals

PubMed Central

2014-01-01

Background New clinical research findings may require clinicians to change their behaviour to provide high-quality care to people with type 2 diabetes, likely requiring them to change multiple different clinical behaviours. The present study builds on findings from a UK-wide study of theory-based behavioural and organisational factors associated with prescribing, advising, and examining consistent with high-quality diabetes care. Aim To develop and evaluate the effectiveness and cost of an intervention to improve multiple behaviours in clinicians involved in delivering high-quality care for type 2 diabetes. Design/methods We will conduct a two-armed cluster randomised controlled trial in 44 general practices in the North East of England to evaluate a theory-based behaviour change intervention. We will target improvement in six underperformed clinical behaviours highlighted in quality standards for type 2 diabetes: prescribing for hypertension; prescribing for glycaemic control; providing physical activity advice; providing nutrition advice; providing on-going education; and ensuring that feet have been examined. The primary outcome will be the proportion of patients appropriately prescribed and examined (using anonymised computer records), and advised (using anonymous patient surveys) at 12 months. We will use behaviour change techniques targeting motivational, volitional, and impulsive factors that we have previously demonstrated to be predictive of multiple health professional behaviours involved in high-quality type 2 diabetes care. We will also investigate whether the intervention was delivered as designed (fidelity) by coding audiotaped workshops and interventionist delivery reports, and operated as hypothesised (process evaluation) by analysing responses to theory-based postal questionnaires. In addition, we will conduct post-trial qualitative interviews with practice teams to further inform the process evaluation, and a post-trial economic analysis to estimate the costs of the intervention and cost of service use. Discussion Consistent with UK Medical Research Council guidance and building on previous development research, this pragmatic cluster randomised trial will evaluate the effectiveness of a theory-based complex intervention focusing on changing multiple clinical behaviours to improve quality of diabetes care. Trial registration ISRCTN66498413. PMID:24886606

Process research of non-Czochralski silicon material

NASA Technical Reports Server (NTRS)

Campbell, R. B.

1986-01-01

Simultaneous diffusion of liquid precursors containing phosphorus and boron into dendritic web silicon to form solar cell structures was investigated. A simultaneous junction formation techniques was developed. It was determined that to produce high quality cells, an annealing cycle (nominal 800 C for 30 min) should follow the diffusion process to anneal quenched-in defects. Two ohm-cm n-base cells were fabricated with efficiencies greater than 15%. A cost analysis indicated that the simultansous diffusion process costs can be as low as 65% of the costs of the sequential diffusion process.

Inducing optimal substitution between antibiotics under open access to the resource of antibiotic susceptibility.

PubMed

Herrmann, Markus; Nkuiya, Bruno

2017-06-01

This paper designs a bio-economic model to examine the use of substitute antibiotic drugs (analogs) sold by an industry that has open access to the resource of the antibiotic class's susceptibility (treatment effectiveness). Antibiotics are characterized by different expected recovery rates and production costs, which in conjunction with the class's treatment susceptibility determines their relative effectiveness. Our analysis reveals that the high-quality antibiotic drug loses its comparative advantage over time making the low-quality drug the treatment of last resort in the market equilibrium and the social optimum when antibiotic susceptibility cannot replenish. However, when antibiotic susceptibility is renewable, both antibiotics may be used in the long run, and the comparative advantage of the high-quality drug may be restored in the social optimum that allows lowering infection in the long run. We develop the optimal tax/subsidy scheme that would induce antibiotic producers under open access to behave optimally and account for the social cost of infection and value of antibiotic susceptibility. We show that the welfare loss associated with the uncorrected open-access allocation is highest; when the resource of antibiotic susceptibility is non-renewable, high morbidity costs are incurred by individuals, and low social discount rates apply. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Disease management: a leap of faith to lower-cost, higher-quality health care.

PubMed

Short, Ashley; Mays, Glen; Mittler, Jessica

2003-10-01

With managed care's promise to reduce costs and improve quality waning, employers and health plans are exploring more targeted ways to control rapidly rising health costs. Disease management programs, which focus on patients with chronic conditions such as asthma and diabetes, are growing in popularity, according to findings from the Center for Studying Health System Change's (HSC) 2002-03 site visits to 12 nationally representative communities. In addition to condition-based disease management programs, some health plans and employers are using intensive case management services to coordinate care for high-risk patients with potentially costly and complex medical conditions. Despite high expectations, evidence of both disease management and case management programs' success in controlling costs and improving quality remains limited.

Comparison of the temperature accuracy between smart phone based and high-end thermal cameras using a temperature gradient phantom

NASA Astrophysics Data System (ADS)

Klaessens, John H.; van der Veen, Albert; Verdaasdonk, Rudolf M.

2017-03-01

Recently, low cost smart phone based thermal cameras are being considered to be used in a clinical setting for monitoring physiological temperature responses such as: body temperature change, local inflammations, perfusion changes or (burn) wound healing. These thermal cameras contain uncooled micro-bolometers with an internal calibration check and have a temperature resolution of 0.1 degree. For clinical applications a fast quality measurement before use is required (absolute temperature check) and quality control (stability, repeatability, absolute temperature, absolute temperature differences) should be performed regularly. Therefore, a calibrated temperature phantom has been developed based on thermistor heating on both ends of a black coated metal strip to create a controllable temperature gradient from room temperature 26 °C up to 100 °C. The absolute temperatures on the strip are determined with software controlled 5 PT-1000 sensors using lookup tables. In this study 3 FLIR-ONE cameras and one high end camera were checked with this temperature phantom. The results show a relative good agreement between both low-cost and high-end camera's and the phantom temperature gradient, with temperature differences of 1 degree up to 6 degrees between the camera's and the phantom. The measurements were repeated as to absolute temperature and temperature stability over the sensor area. Both low-cost and high-end thermal cameras measured relative temperature changes with high accuracy and absolute temperatures with constant deviations. Low-cost smart phone based thermal cameras can be a good alternative to high-end thermal cameras for routine clinical measurements, appropriate to the research question, providing regular calibration checks for quality control.

Leveraging the Potential of Personal Learning Networks for Teacher Professional Development

ERIC Educational Resources Information Center

Maloney, Katherine J.

2016-01-01

In times of exponential change, high quality, cost-effective teacher professional development is an urgent need that personal learning networks (PLNs) promise to address. The purpose of the qualitative case study was to (a) explore, understand, and describe how PreK-12 educators, who are members of The Educator's PLN and Classroom 2.0 communities,…

Student Experiences and Perceptions of Digital Literacy Skills Development: Engaging Learners by Design?

ERIC Educational Resources Information Center

Hall, Marion; Nix, Ingrid; Baker, Kirsty

2013-01-01

In the current digital environment, it is vital for learners to develop digital literacy skills. The UK's Quality Assurance Agency for Higher Education (HE) requires graduates to demonstrate digital literacy. Employers consider these skills essential. With the high cost of HE in the UK, learners themselves also expect university courses to…

Safe and Sound: An Educational Leader's Guide to Evidence-Based Social and Emotional Learning (SEL) Programs

ERIC Educational Resources Information Center

Collaborative for Academic, Social, and Emotional Learning (NJ1), 2003

2003-01-01

This guide was developed to provide educators with information about nationally available programs for the classroom that promote social and emotional learning (SEL). It details the costs, the grades covered, evidence base, which most effectively teach core social and emotional skills, and which provide high-quality staff development and support.…

Students' Experiences and Expectations of Technologies: An Australian Study Designed to Inform Planning and Development Decisions

ERIC Educational Resources Information Center

Gosper, Maree; Malfroy, Janne; McKenzie, Jo

2013-01-01

The pace of technological change accompanied by an evolution in social, work-based and study behaviours and norms poses particular challenges for universities as they strive to develop high quality and sustainable technology-rich learning environments. Maintaining currency with the latest advances is resource intensive, hence the costs incurred in…

Controlling flooding and water pollution with upland and streamside vegetation systems

Treesearch

Michael Dosskey

2003-01-01

Substantial research and development effort in the U.S. is being spent on developing strategies that address flooding and water pollution problems in agricultural areas. Concerns have been raised about the costs of flood damage, degradation of productive farm land, and declining water quality that are now recognized as unintended consequences of intensive, high-yield...

British Thoracic Society quality standards for the investigation and management of pulmonary nodules.

PubMed

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations.

British Thoracic Society quality standards for the investigation and management of pulmonary nodules

PubMed Central

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations. PMID:29682290

Evidence of Program Quality and Youth Outcomes in the DYCD Out-of-School Time Initiative: Report on the Initiative's First Three Years

ERIC Educational Resources Information Center

Russell, Christina A.; Mielke, Monica B.; Reisner, Elizabeth R.

2009-01-01

In September 2005, the New York City Department of Youth and Community Development (DYCD) launched the Out-of-School Time Programs for Youth (OST) initiative to provide young people throughout New York City with access to high-quality programming after school, on holidays, and during the summer at no cost to their families. Working closely with…

Health care competition, strategic mission, and patient satisfaction: research model and propositions.

PubMed

Rivers, Patrick A; Glover, Saundra H

2008-01-01

In all industries, competition among businesses has long been encouraged as a mechanism to increase value for patients. In other words, competition ensures the provision of better products and services to satisfy the needs of customers This paper aims to develop a model that can be used to empirically investigate a number of complex issues and relationships associated with competition in the health care industry. A literature review was conducted. A total of 50 items of literature related to the subject were reviewed. Various perspectives of competition, the nature of service quality, health system costs, and patient satisfaction in health care are examined. A model of the relationship among these variables is developed. The model depicts patient satisfaction as an outcome measure directly dependent on competition. Quality of care and health care systems costs, while also directly dependent on the strategic mission and goals, are considered as determinants of customer satisfaction as well. The model is discussed in the light of propositions for empirical research. Empirical studies based on the model proposed in this paper should help identify areas with significant impact on patient satisfaction while maintaining high quality of service at lower costs in a competitive environment. The authors develop a research model which included propositions to examine the complex issues of competition in the health care industry.

Discovery Planetary Mission Operations Concepts

NASA Technical Reports Server (NTRS)

Coffin, R.

1994-01-01

The NASA Discovery Program of small planetary missions will provide opportunities to continue scientific exploration of the solar system in today's cost-constrained environment. Using a multidisciplinary team, JPL has developed plans to provide mission operations within the financial parameters established by the Discovery Program. This paper describes experiences and methods that show promise of allowing the Discovery Missions to operate within the program cost constraints while maintaining low mission risk, high data quality, and reponsive operations.

[Concept for a department of intensive care].

PubMed

Nierhaus, A; de Heer, G; Kluge, S

2014-10-01

Demographic change and increasing complexity are among the reasons for high-tech critical care playing a major and increasing role in today's hospitals. At the same time, intensive care is one of the most cost-intensive departments in the hospital. To guarantee high-quality care, close cooperation of specialised intensive care staff with specialists of all other medical areas is essential. A network of the intensive care units within the hospital may lead to synergistic effects concerning quality of care, simultaneously optimizing the use of human and technical resources. Notwithstanding any organisational concepts, development and maintenance of the highest possible quality of care should be of overriding importance.

Smart wireless continence management system for persons with dementia.

PubMed

Wai, Aung Aung Phyo; Fook, Victor Foo Siang; Jayachandran, Maniyeri; Biswas, Jit; Nugent, Chris; Mulvenna, Maurice; Lee, Jer-En; Kiat, Philp Yap Lian

2008-10-01

Incontinence is highly prevalent in the elderly population, especially in nursing home residents with dementia. It is a distressing and costly health problem that affects not only the patients but also the caregivers. Effective continence management is required to provide quality care, and to eliminate high labor costs and annoyances to the caregivers resulting from episodes of incontinence. This paper presents the design, development, and preliminary deployment of a smart wireless continence management system for dementia-impaired elderly or patients in institutional care settings such as nursing homes and hospitals. Specifically, the mote wireless platform was used to support the deployment of potentially large quantities of wetness sensors with wider coverage and with dramatically less complexity and cost. It consists of an intelligent signal relay mechanism so that the residents are free to move about in the nursing home or hospital and allows personalized continence management service. Preliminary results from a trial in a local nursing home are promising and can significantly improve the quality of care for patients.

Big things come in bundled packages: implications of bundled payment systems in health care reimbursement reform.

PubMed

Delisle, Dennis R

2013-01-01

With passage of the Affordable Care Act, the ever-evolving landscape of health care braces for another shift in the reimbursement paradigm. As health care costs continue to rise, providers are pressed to deliver efficient, high-quality care at flat to minimally increasing rates. Inherent systemwide inefficiencies between payers and providers at various clinical settings pose a daunting task for enhancing collaboration and care coordination. A change from Medicare's fee-for-service reimbursement model to bundled payments offers one avenue for resolution. Pilots using such payment models have realized varying degrees of success, leading to the development and upcoming implementation of a bundled payment initiative led by the Center for Medicare and Medicaid Innovation. Delivery integration is critical to ensure high-quality care at affordable costs across the system. Providers and payers able to adapt to the newly proposed models of payment will benefit from achieving cost reductions and improved patient outcomes and realize a competitive advantage.

Engaging Primary Care Practices in Studies of Improvement: Did You Budget Enough for Practice Recruitment?

PubMed

Fagnan, Lyle J; Walunas, Theresa L; Parchman, Michael L; Dickinson, Caitlin L; Murphy, Katrina M; Howell, Ross; Jackson, Kathryn L; Madden, Margaret B; Ciesla, James R; Mazurek, Kathryn D; Kho, Abel N; Solberg, Leif I

2018-04-01

The methods and costs to enroll small primary care practices in large, regional quality improvement initiatives are unknown. We describe the recruitment approach, cost, and resources required to recruit and enroll 500 practices in the Northwest and Midwest regional cooperatives participating in the Agency for Healthcare Research and Quality (AHRQ)-funded initiative, EvidenceNOW: Advancing Heart Health in Primary Care. The project management team of each cooperative tracked data on recruitment methods used for identifying and connecting with practices. We developed a cost-of-recruitment template and used it to record personnel time and associated costs of travel and communication materials. A total of 3,669 practices were contacted during the 14- to 18-month recruitment period, resulting in 484 enrolled practices across the 6 states served by the 2 cooperatives. The average number of interactions per enrolled practice was 7, with a total of 29,100 hours and a total cost of $2.675 million, or $5,529 per enrolled practice. Prior partnerships predicted recruiting almost 1 in 3 of these practices as contrasted to 1 in 20 practices without a previous relationship or warm hand-off. Recruitment of practices for large-scale practice quality improvement transformation initiatives is difficult and costly. The cost of recruiting practices without existing partnerships is expensive, costing 7 times more than reaching out to familiar practices. Investigators initiating and studying practice quality improvement initiatives should budget adequate funds to support high-touch recruitment strategies, including building trusted relationships over a long time frame, for a year or more. © 2018 Annals of Family Medicine, Inc.

Congestion Mitigation and Air Quality (CMAQ) Improvement Program: Cost-Effectiveness Tables Development and Methodology

DOT National Transportation Integrated Search

2015-05-01

This document presents summary and detailed findings from a research effort to develop estimates of the cost-effectiveness of a range of project types funded under the Congestion Mitigation and Air Quality (CMAQ) Improvement Program. In this study, c...

Hughes integrated synthetic aperture radar: High performance at low cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayma, R.W.

1996-11-01

This paper describes the background and development of the low cost high-performance Hughes Integrated Synthetic Aperture Radar (HISAR{trademark}) which has a full range of capabilities for real-time reconnaissance, surveillance and earth resource mapping. HISAR uses advanced Synthetic Aperture Radar (SAR) technology to make operationally effective images of near photo quality, day or night and in all weather conditions. This is achieved at low cost by maximizing the use of commercially available radar and signal-processing equipment in the fabrication. Furthermore, HISAR is designed to fit into an executive-class aircraft making it available for a wide range of users. 4 refs., 8more » figs.« less

Ultrafast treatment plan optimization for volumetric modulated arc therapy (VMAT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Men Chunhua; Romeijn, H. Edwin; Jia Xun

2010-11-15

Purpose: To develop a novel aperture-based algorithm for volumetric modulated arc therapy (VMAT) treatment plan optimization with high quality and high efficiency. Methods: The VMAT optimization problem is formulated as a large-scale convex programming problem solved by a column generation approach. The authors consider a cost function consisting two terms, the first enforcing a desired dose distribution and the second guaranteeing a smooth dose rate variation between successive gantry angles. A gantry rotation is discretized into 180 beam angles and for each beam angle, only one MLC aperture is allowed. The apertures are generated one by one in a sequentialmore » way. At each iteration of the column generation method, a deliverable MLC aperture is generated for one of the unoccupied beam angles by solving a subproblem with the consideration of MLC mechanic constraints. A subsequent master problem is then solved to determine the dose rate at all currently generated apertures by minimizing the cost function. When all 180 beam angles are occupied, the optimization completes, yielding a set of deliverable apertures and associated dose rates that produce a high quality plan. Results: The algorithm was preliminarily tested on five prostate and five head-and-neck clinical cases, each with one full gantry rotation without any couch/collimator rotations. High quality VMAT plans have been generated for all ten cases with extremely high efficiency. It takes only 5-8 min on CPU (MATLAB code on an Intel Xeon 2.27 GHz CPU) and 18-31 s on GPU (CUDA code on an NVIDIA Tesla C1060 GPU card) to generate such plans. Conclusions: The authors have developed an aperture-based VMAT optimization algorithm which can generate clinically deliverable high quality treatment plans at very high efficiency.« less

Ultrafast treatment plan optimization for volumetric modulated arc therapy (VMAT).

PubMed

Men, Chunhua; Romeijn, H Edwin; Jia, Xun; Jiang, Steve B

2010-11-01

To develop a novel aperture-based algorithm for volumetric modulated are therapy (VMAT) treatment plan optimization with high quality and high efficiency. The VMAT optimization problem is formulated as a large-scale convex programming problem solved by a column generation approach. The authors consider a cost function consisting two terms, the first enforcing a desired dose distribution and the second guaranteeing a smooth dose rate variation between successive gantry angles. A gantry rotation is discretized into 180 beam angles and for each beam angle, only one MLC aperture is allowed. The apertures are generated one by one in a sequential way. At each iteration of the column generation method, a deliverable MLC aperture is generated for one of the unoccupied beam angles by solving a subproblem with the consideration of MLC mechanic constraints. A subsequent master problem is then solved to determine the dose rate at all currently generated apertures by minimizing the cost function. When all 180 beam angles are occupied, the optimization completes, yielding a set of deliverable apertures and associated dose rates that produce a high quality plan. The algorithm was preliminarily tested on five prostate and five head-and-neck clinical cases, each with one full gantry rotation without any couch/collimator rotations. High quality VMAT plans have been generated for all ten cases with extremely high efficiency. It takes only 5-8 min on CPU (MATLAB code on an Intel Xeon 2.27 GHz CPU) and 18-31 s on GPU (CUDA code on an NVIDIA Tesla C1060 GPU card) to generate such plans. The authors have developed an aperture-based VMAT optimization algorithm which can generate clinically deliverable high quality treatment plans at very high efficiency.

Improving cost-effectiveness of and outcomes from drug therapy in patients with atrial fibrillation in managed care: role of the pharmacist.

PubMed

Johnson, Samuel G

2009-08-01

The medical care costs for procedures, medications, and testing associated with atrial fibrillation (AF) in the United States are high and projected to increase markedly in the future as the number of Americans affected grows. The burden on patient quality of life, the health care system, and society are pharmacoeconomic considerations in managing AF. To identify key pharmacoeconomic considerations in managing AF and describe ways in which managed care pharmacists can improve the cost-effectiveness of and outcomes from drug therapy for AF. The high medical care costs of AF are largely the result of the high cost of hospitalization and inpatient procedures. Recurrence of AF dramatically increases costs, especially for hospital care. Managed care pharmacists have many opportunities to provide cost-effective care to and improve outcomes in patients with AF. Policy and process review, population management, and case management are key strategies for improving outcomes in patients with AF. Pharmacist input into policy and process review, including pharmacy benefits design, formulary management, and the use of information technology, can help ensure that the use of drug therapy for AF is cost-effective. Population management strategies, such as development of clinical pathways and patient registries, seek to improve the quality, consistency, and cost-effectiveness of care and the likelihood that desired therapeutic outcomes are achieved through targeted interventions. Case management strategies focus on longitudinal care for individuals in order to improve quality. Pharmacist-managed anticoagulation services and antiarrhythmic drug monitoring are the 2 most widely known case management strategies for patients with AF. Managed care pharmacists can screen patients with AF for the use of anticoagulation, which is needed to prevent embolic stroke but is under-used, even though recommended by evidence-based guidelines. The clinical efficacy and cost-effectiveness of pharmacist-managed anticoagulation services for patients with AF are well documented. Pharmacist-managed antiarrhythmic drug monitoring is a less well-known case management strategy that facilitates early detection and intervention to minimize toxicity. Managed care pharmacists can play an instrumental role in implementing strategies to improve the cost-effectiveness of and outcomes from drug therapy for AF.

PREFACE TO SPECIAL SECTION ON PARTICULATE MATTER SUPERSITES

EPA Science Inventory

An improved understanding of the key sources, development of the most cost/effective control strategies, and health risks associated with PM2.5 requires high-quality measurements of PM2.5 composition, size and, concentration over a variety of spatial and temporal scales. However...

Cost-effectiveness of Apixaban Compared With Edoxaban for Stroke Prevention in Nonvalvular Atrial Fibrillation.

PubMed

Lip, Gregory Y H; Lanitis, Tereza; Kongnakorn, Thitima; Phatak, Hemant; Chalkiadaki, Corina; Liu, Xianchen; Kuznik, Andreas; Lawrence, Jack; Dorian, Paul

2015-11-01

The purpose of this analysis was to assess the cost-effectiveness of apixaban 5 mg BID versus high- and low-dose edoxaban (60 mg and 30 mg once daily) as intended starting dose strategies for stroke prevention in patients from a UK National Health Service perspective. A previously developed and validated Markov model was adapted to evaluate the lifetime clinical and economic impact of apixaban 5 mg BID versus edoxaban (high and low dose) in patients with nonvalvular atrial fibrillation. A pairwise indirect treatment comparison was conducted for clinical end points, and price parity was assumed between apixaban and edoxaban. Costs in 2012 British pounds, life-years, and quality-adjusted life-years (QALYs) gained, discounted at 3.5% per annum, were estimated. Apixaban was predicted to increase life expectancy and QALYs versus low- and high-dose edoxaban. These gains were achieved at cost-savings versus low-dose edoxaban, thus being dominant and nominal increases in costs versus high-dose edoxaban. The incremental cost-effectiveness ratio of apixaban versus high-dose edoxaban was £6763 per QALY gained. Apixaban was deemed to be dominant (less costly and more effective) versus low-dose edoxaban and a cost-effective alternative to high-dose edoxaban. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Predictors of micro-costing components in liver transplantation

PubMed Central

de Paiva Haddad, Luciana Bertocco; Ducatti, Liliana; Mendes, Luana Regina Baratelli Carelli; Andraus, Wellington; D’Albuquerque, Luiz Augusto Carneiro

2017-01-01

OBJECTIVES: Although liver transplantation procedures are common and highly expensive, their cost structure is still poorly understood. This study aimed to develop models of micro-costs among patients undergoing liver transplantation procedures while comparing the role of individual clinical predictors using tree regression models. METHODS: We prospectively collected micro-cost data from patients undergoing liver transplantation in a tertiary academic center. Data collection was conducted using an Intranet registry integrated into the institution’s database for the storing of financial and clinical data for transplantation cases. RESULTS: A total of 278 patients were included and accounted for 300 procedures. When evaluating specific costs for the operating room, intensive care unit and ward, we found that in all of the sectors but the ward, human resources were responsible for the highest costs. High cost supplies were important drivers for the operating room, whereas drugs were among the top four drivers for all sectors. When evaluating the predictors of total cost, a MELD score greater than 30 was the most important predictor of high cost, followed by a Donor Risk Index greater than 1.8. CONCLUSION: By focusing on the highest cost drivers and predictors, hospitals can initiate programs to reduce cost while maintaining high quality care standards. PMID:28658432

Key Features of the National Polar-Orbiting Operational Environmental Satellite System (NPOESS) System Architecture

NASA Astrophysics Data System (ADS)

Pela, F.; Tsugawa, R. K.; Andreoli, L. J.

2004-12-01

The National Polar-Orbiting NPOESS, a tri-agency program, supports missions of the Department of Commerce (DOC)/National Oceanic and Atmospheric Administration (NOAA), the Department of Defense (DoD), and the National Aeronautics and Space Administration (NASA). NPOESS provides a critical, timely, reliable, and high quality space-based sensing capability to acquire and process global and regional environmental imagery and specialized meteorological, climatic, terrestrial, oceanographic, solar-geophysical, and other data products. These products are delivered to national weather and environmental facilities operated by NOAA and DoD, to NASA, and to environmental remote sensing science community users to support civil and military functions. These data are also provided in real time to field terminals deployed worldwide. The NPOESS architecture is built on a foundation of affordability, and the three pillars of data quality, latency, availability. Affordability refers to an over-arching awareness of cost to provide the best value to the government for implementing a converged system; some dimensions of cost include the cost for system development and implementation, the balance between development costs and operation and maintenance costs, and the fiscal year expenditure plans that meet schedule commitments. Data quality is characterized in terms of the attributes associated with Environmental Data Records (EDRs), and the products that are delivered to the four US Operational Centrals and field users. These EDRs are generated by the system using raw data from the space-borne sensors and spacecraft, in conjunction with science algorithms and calibration factors. Data latency refers to the time period between the detection of energy by a space-borne sensor to the delivery of a corresponding EDR. The system was designed to minimize data latency, and hence provide users with timely data. Availability refers to both data availability and system operational availability. Data availability is ensured by the way data is stored and routed throughout the system, on the spacecraft and on the ground, so that it can be retrieved and resent if the first transmittal is not successful. Operational availability is a measure of how well around-the-clock operations are supported, through the careful deployment of hot spares and fault tolerance of the system. Both types of availability are very high for the NPOESS architecture. Overall, the NPOESS architecture successfully delivers to the government a best-value solution featuring high data quality, low data latency, and high data/system availability.

A design procedure for the handling qualities optimization of the X-29A aircraft

NASA Technical Reports Server (NTRS)

Bosworth, John T.; Cox, Timothy H.

1989-01-01

A design technique for handling qualities improvement was developed for the X-29A aircraft. As with any new aircraft, the X-29A control law designers were presented with a relatively high degree of uncertainty in their mathematical models. The presence of uncertainties, and the high level of static instability of the X-29A caused the control law designers to stress stability and robustness over handling qualities. During flight test, the mathematical models of the vehicle were validated or corrected to match the vehicle dynamic behavior. The updated models were then used to fine tune the control system to provide fighter-like handling characteristics. A design methodology was developed which works within the existing control system architecture to provide improved handling qualities and acceptable stability with a minimum of cost in both implementation as well as software verification and validation.

Economic Evaluations of Pathology Tests, 2010-2015: A Scoping Review.

PubMed

Watts, Rory D; Li, Ian W; Geelhoed, Elizabeth A; Sanfilippo, Frank M; St John, Andrew

2017-09-01

Concerns about pathology testing such as the value provided by new tests and the potential for inappropriate utilization have led to a greater need to assess costs and benefits. Economic evaluations are a formal method of analyzing costs and benefits, yet for pathology tests, questions remain about the scope and quality of the economic evidence. To describe the extent and quality of published evidence provided by economic evaluations of pathology tests from 2010 to 2015. Economic evaluations relating to pathology tests from 2010 to 2015 were reviewed. Eight databases were searched for published studies, and details recorded for the country, clinical focus, type of testing, and consideration of sensitivity, specificity, and false test results. The reporting quality of studies was assessed using the Consolidated Health Economic Evaluation Reporting Standards checklist and cost-effectiveness ratios were analyzed for publication bias. We found 356 economic evaluations of pathology tests, most of which regarded developed countries. The most common economic evaluations were cost-utility analyses and the most common clinical focus was infectious diseases. More than half of the studies considered sensitivity and specificity, but few studies considered the impact of false test results. The average Consolidated Health Economic Evaluation Reporting Standards checklist score was 17 out of 24. Cost-utility ratios were commonly less than $10,000/quality-adjusted life-year or more than $200,000/quality-adjusted life-year. The number of economic evaluations of pathology tests has increased in recent years, but the rate of increase has plateaued. Furthermore, the quality of studies in the past 5 years was highly variable, and there is some question of publication bias in reporting cost-effectiveness ratios. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Isolation of high-quality total RNA from leaves of Myrciaria dubia "CAMU CAMU".

PubMed

Gómez, Juan Carlos Castro; Reátegui, Alina Del Carmen Egoavil; Flores, Julián Torres; Saavedra, Roberson Ramírez; Ruiz, Marianela Cobos; Correa, Sixto Alfredo Imán

2013-01-01

Myrciaria dubia is a main source of vitamin C for people in the Amazon region. Molecular studies of M. dubia require high-quality total RNA from different tissues. So far, no protocols have been reported for total RNA isolation from leaves of this species. The objective of this research was to develop protocols for extracting high-quality total RNA from leaves of M. dubia. Total RNA was purified following two modified protocols developed for leaves of other species (by Zeng and Yang, and by Reid et al.) and one modified protocol developed for fruits of the studied species (by Silva). Quantity and quality of purified total RNA were assessed by spectrophotometric and electrophoretic analysis. Additionally, quality of total RNA was evaluated with reverse-transcription polymerase chain reaction (RT-PCR). With these three modified protocols we were able to isolate high-quality RNA (A260nm/A280nm >1.9 and A260nm/A230nm >2.0). Highest yield was produced with the Zeng and Yang modified protocol (384±46µg ARN/g fresh weight). Furthermore, electrophoretic analysis showed the integrity of isolated RNA and the absence of DNA. Another proof of the high quality of our purified RNA was the successful cDNA synthesis and amplification of a segment of the M. dubia actin 1 gene. We report three modified protocols for isolation total RNA from leaves of M. dubia. The modified protocols are easy, rapid, low in cost, and effective for high-quality and quantity total RNA isolation suitable for cDNA synthesis and polymerase chain reaction.

Costs of complications after colorectal cancer surgery in the Netherlands: Building the business case for hospitals.

PubMed

Govaert, J A; Fiocco, M; van Dijk, W A; Scheffer, A C; de Graaf, E J R; Tollenaar, R A E M; Wouters, M W J M

2015-08-01

Healthcare providers worldwide are struggling with rising costs while hospitals budgets are under stress. Colorectal cancer surgery is commonly performed, however it is associated with a disproportionate share of adverse events in general surgery. Since adverse events are associated with extra hospital costs it seems important to explicitly discuss the costs of complications and the risk factors for high-costs after colorectal surgery. Retrospective analysis of clinical and financial outcomes after colorectal cancer surgery in 29 Dutch hospitals (6768 patients). Detailed clinical data was derived from the 2011-2012 population-based Dutch Surgical Colorectal Audit database. Costs were measured uniform in all participating hospitals and based on Time-Driven Activity-Based Costing. Of total hospital costs in this study, 31% was spent on complications and the top 5% most expensive patients were accountable for 23% of hospitals budgets. Minor and severe complications were respectively associated with a 26% and 196% increase in costs as compared to patients without complications. Independent from other risk factors, ASA IV, double tumor, ASA III, short course preoperative radiotherapy and TNM-4 stadium disease were the top-5 attributors to high costs. This article shows that complications after colorectal cancer surgery are associated with a substantial increase in costs. Although not all surgical complications can be prevented, reducing complications will result in considerable cost savings. By providing a business case we show that investments made to develop targeted quality improvement programs will pay off eventually. Results based on this study should encourage healthcare providers to endorse quality improvement efforts. Copyright © 2015 Elsevier Ltd. All rights reserved.

Assessing image quality of low-cost laparoscopic box trainers: options for residents training at home.

PubMed

Kiely, Daniel J; Stephanson, Kirk; Ross, Sue

2011-10-01

Low-cost laparoscopic box trainers built using home computers and webcams may provide residents with a useful tool for practice at home. This study set out to evaluate the image quality of low-cost laparoscopic box trainers compared with a commercially available model. Five low-cost laparoscopic box trainers including the components listed were compared in random order to one commercially available box trainer: A (high-definition USB 2.0 webcam, PC laptop), B (Firewire webcam, Mac laptop), C (high-definition USB 2.0 webcam, Mac laptop), D (standard USB webcam, PC desktop), E (Firewire webcam, PC desktop), and F (the TRLCD03 3-DMEd Standard Minimally Invasive Training System). Participants observed still image quality and performed a peg transfer task using each box trainer. Participants rated still image quality, image quality with motion, and whether the box trainer had sufficient image quality to be useful for training. Sixteen residents in obstetrics and gynecology took part in the study. The box trainers showing no statistically significant difference from the commercially available model were A, B, C, D, and E for still image quality; A for image quality with motion; and A and B for usefulness of the simulator based on image quality. The cost of the box trainers A-E is approximately $100 to $160 each, not including a computer or laparoscopic instruments. Laparoscopic box trainers built from a high-definition USB 2.0 webcam with a PC (box trainer A) or from a Firewire webcam with a Mac (box trainer B) provide image quality comparable with a commercial standard.

A quiet flow Ludwieg tube for study of transition in compressible boundary layers: Design and feasibility

NASA Technical Reports Server (NTRS)

Schneider, Steven P.

1990-01-01

Since Ludwieg tubes have been around for many years, and NASA has already established the feasibility of creating quiet-flow wind tunnels, the major question addressed was the cost of the proposed facility. Cost estimates were obtained for major system components, and new designs which allowed fabrication at lower cost were developed. A large fraction of the facility cost comes from the fabrication of the highly polished quiet-flow supersonic nozzle. Methods for the design of this nozzle were studied at length in an attempt to find an effective but less expensive design. Progress was sufficient to show that a quality facility can be fabricated at a reasonable cost.

The economic costs and health-related quality of life of people with HIV/AIDS in the Canary Islands, Spain

PubMed Central

Lopez-Bastida, Julio; Oliva-Moreno, Juan; Perestelo-Perez, Lilisbeth; Serrano-Aguilar, Pedro

2009-01-01

Background The objective was to determine the economic burden, as well as the impact on HRQOL for people with HIV/AIDS in Spain in 2003. Methods A cross-sectional study of 572 people with HIV were recruited from outpatient clinics in the Canary Islands, Spain. Demographic, health resources utilization, indirect costs and quality of life data were collected through medical records and questionnaires filled out by people with HIV. HRQOL was measured with two generic questionnaires: SF-36 and EQ-5D. Results In 2003 annual costs of caring for patients with asymptomatic HIV, symptomatic HIV and AIDS were €10,351, €14,489 and €15,750, respectively. The HRQOL with the EQ-5D was 0.78. SF-36 summary results for physical and mental health were 48.30 and 38.80, respectively. Conclusion HIV/AIDS represent a high economic impact from society point of view. the structure of health care costs have changed due to these new drugs, increasing the weight of pharmaceutical treatment over total costs and decreasing the importance of inpatient care costs. In spite of the therapeutic improvements, labour losses/indirect costs still represent a high cost. Costs and HRQOL were strongly associated with severity. Although the latest drug developments have not yet been able to find the definitive cure, they have allowed an improvement in expectancy of life and in the HRQOL of the patients. PMID:19331682

1366 Project Automate: Enabling Automation for <$0.10/W High-Efficiency Kerfless Wafers Manufactured in the US

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorenz, Adam

For photovoltaic (PV) manufacturing to thrive in the U.S., there must be an innovative core to the technology. Project Automate builds on 1366’s proprietary Direct Wafer® kerfless wafer technology and aims to unlock the cost and efficiency advantages of thin kerfless wafers. Direct Wafer is an innovative, U.S.-friendly (efficient, low-labor content) manufacturing process that addresses the main cost barrier limiting silicon PV cost-reductions – the 35-year-old grand challenge of manufacturing quality wafers (40% of the cost of modules) without the cost and waste of sawing. This simple, scalable process will allow 1366 to manufacture “drop-in” replacement wafers for the $10more » billion silicon PV wafer market at 50% of the cost, 60% of the capital, and 30% of the electricity of conventional casting and sawing manufacturing processes. This SolarMat project developed the Direct Wafer processes’ unique capability to tailor the shape of wafers to simultaneously make thinner AND stronger wafers (with lower silicon usage) that enable high-efficiency cell architectures. By producing wafers with a unique target geometry including a thick border (which determines handling characteristics) and thin interior regions (which control light capture and electron transport and therefore determine efficiency), 1366 can simultaneously improve quality and lower cost (using less silicon).« less

Development of the ASTRI heliostat

NASA Astrophysics Data System (ADS)

Coventry, Joe; Arjomandi, Maziar; Barry, John; Blanco, Manuel; Burgess, Greg; Campbell, Jonathan; Connor, Phil; Emes, Matthew; Fairman, Philip; Farrant, David; Ghanadi, Farzin; Grigoriev, Victor; Hall, Colin; Koltun, Paul; Lewis, David; Martin, Scott; Nathan, Graham; Pye, John; Qiu, Ang; Stuart, Wayne; Tang, Youhong; Venn, Felix; Yu, Jeremy

2016-05-01

The Australian Solar Thermal Research Initiative (ASTRI) aims to develop a high optical quality heliostat with target cost - manufactured, installed and operational - of 90 AUD/m2. Three different heliostat design concepts are described, each with features identified during a prior scoping study as having the potential to contribute to cost reduction compared to the current state-of-the-art. The three concepts which are being developed will be down-selected to a single concept for testing in late 2016. The heliostat concept development work is supported by technology development streams, developing novel sandwich panel mirror facet structures, analysing and testing wind loads on heliostats in both stow and operation positions, and developing new heliostat field layouts and software tools for optical analysis of heliostats design concepts.

Growth and Photovoltaic Properties of High-Quality GaAs Nanowires Prepared by the Two-Source CVD Method.

PubMed

Wang, Ying; Yang, Zaixing; Wu, Xiaofeng; Han, Ning; Liu, Hanyu; Wang, Shuobo; Li, Jun; Tse, WaiMan; Yip, SenPo; Chen, Yunfa; Ho, Johnny C

2016-12-01

Growing high-quality and low-cost GaAs nanowires (NWs) as well as fabricating high-performance NW solar cells by facile means is an important development towards the cost-effective next-generation photovoltaics. In this work, highly crystalline, dense, and long GaAs NWs are successfully synthesized using a two-source method on non-crystalline SiO2 substrates by a simple solid-source chemical vapor deposition method. The high V/III ratio and precursor concentration enabled by this two-source configuration can significantly benefit the NW growth and suppress the crystal defect formation as compared with the conventional one-source system. Since less NW crystal defects would contribute fewer electrons being trapped by the surface oxides, the p-type conductivity is then greatly enhanced as revealed by the electrical characterization of fabricated NW devices. Furthermore, the individual single NW and high-density NW parallel arrays achieved by contact printing can be effectively fabricated into Schottky barrier solar cells simply by employing asymmetric Ni-Al contacts, along with an open circuit voltage of ~0.3 V. All these results indicate the technological promise of these high-quality two-source grown GaAs NWs, especially for the realization of facile Schottky solar cells utilizing the asymmetric Ni-Al contact.

Air Quality Management Using Modern Remote Sensing and Spatial Technologies and Associated Societal Costs

PubMed Central

Uddin, Waheed

2006-01-01

This paper presents a study of societal costs related to public health due to the degradation of air quality and the lack of physical activity, both affected by our built environment. The paper further shows road safety as another public health concern. Traffic fatalities are the number one cause of death in the world. Traffic accidents result in huge financial loss to the people involved and the related public health cost is a significant part of the total societal cost. Motor vehicle exhausts and industrial emissions, gasoline vapors, and chemical solvents as well as natural sources emit nitrogen oxides and volatile organic compounds, which are precursors to the formation of ground-level Ozone. High concentration values of ground-level Ozone in hot summer days produce smog and lead to respiratory problems and loss in worker’s productivity. These factors and associated economic costs to society are important in establishing public policy and decision-making for sustainable transportation and development of communities in both industrialized and developing countries. This paper presents new science models for predicting ground-level Ozone and related air quality degradation. The models include predictor variables of daily climatological data, traffic volume and mix, speed, aviation data, and emission inventory of point sources. These models have been implemented in the user friendly AQMAN computer program and used for a case study in Northern Mississippi. Life-cycle benefits from reduced societal costs can be used to implement sustainable transportation policies, enhance investment decision-making, and protect public health and the environment. PMID:16968969

The Effects of Quality of Care on Costs: A Conceptual Framework

PubMed Central

Nuckols, Teryl K; Escarce, José J; Asch, Steven M

2013-01-01

Context The quality of health care and the financial costs affected by receiving care represent two fundamental dimensions for judging health care performance. No existing conceptual framework appears to have described how quality influences costs. Methods We developed the Quality-Cost Framework, drawing from the work of Donabedian, the RAND/UCLA Appropriateness Method, reports by the Institute of Medicine, and other sources. Findings The Quality-Cost Framework describes how health-related quality of care (aspects of quality that influence health status) affects health care and other costs. Structure influences process, which, in turn, affects proximate and ultimate outcomes. Within structure, subdomains include general structural characteristics, circumstance-specific (e.g., disease-specific) structural characteristics, and quality-improvement systems. Process subdomains include appropriateness of care and medical errors. Proximate outcomes consist of disease progression, disease complications, and care complications. Each of the preceding subdomains influences health care costs. For example, quality improvement systems often create costs associated with monitoring and feedback. Providing appropriate care frequently requires additional physician visits and medications. Care complications may result in costly hospitalizations or procedures. Ultimate outcomes include functional status as well as length and quality of life; the economic value of these outcomes can be measured in terms of health utility or health-status-related costs. We illustrate our framework using examples related to glycemic control for type 2 diabetes mellitus or the appropriateness of care for low back pain. Conclusions The Quality-Cost Framework describes the mechanisms by which health-related quality of care affects health care and health status–related costs. Additional work will need to validate the framework by applying it to multiple clinical conditions. Applicability could be assessed by using the framework to classify the measures of quality and cost reported in published studies. Usefulness could be demonstrated by employing the framework to identify design flaws in published cost analyses, such as omitting the costs attributable to a relevant subdomain of quality. PMID:23758513

Development of Moire machine vision

NASA Technical Reports Server (NTRS)

Harding, Kevin G.

1987-01-01

Three dimensional perception is essential to the development of versatile robotics systems in order to handle complex manufacturing tasks in future factories and in providing high accuracy measurements needed in flexible manufacturing and quality control. A program is described which will develop the potential of Moire techniques to provide this capability in vision systems and automated measurements, and demonstrate artificial intelligence (AI) techniques to take advantage of the strengths of Moire sensing. Moire techniques provide a means of optically manipulating the complex visual data in a three dimensional scene into a form which can be easily and quickly analyzed by computers. This type of optical data manipulation provides high productivity through integrated automation, producing a high quality product while reducing computer and mechanical manipulation requirements and thereby the cost and time of production. This nondestructive evaluation is developed to be able to make full field range measurement and three dimensional scene analysis.

Development of Moire machine vision

NASA Astrophysics Data System (ADS)

Harding, Kevin G.

1987-10-01

Three dimensional perception is essential to the development of versatile robotics systems in order to handle complex manufacturing tasks in future factories and in providing high accuracy measurements needed in flexible manufacturing and quality control. A program is described which will develop the potential of Moire techniques to provide this capability in vision systems and automated measurements, and demonstrate artificial intelligence (AI) techniques to take advantage of the strengths of Moire sensing. Moire techniques provide a means of optically manipulating the complex visual data in a three dimensional scene into a form which can be easily and quickly analyzed by computers. This type of optical data manipulation provides high productivity through integrated automation, producing a high quality product while reducing computer and mechanical manipulation requirements and thereby the cost and time of production. This nondestructive evaluation is developed to be able to make full field range measurement and three dimensional scene analysis.

Projecting manpower to attain quality

NASA Technical Reports Server (NTRS)

Rone, K. Y.

1983-01-01

The resulting model is useful as a projection tool but must be validated in order to be used as an on-going software cost engineering tool. A procedure is developed to facilitate the tracking of model projections and actual data to allow the model to be tuned. Finally, since the model must be used in an environment of overlapping development activities on a progression of software elements in development and maintenance, a manpower allocation model is developed for use in a steady state development/maintenance environment. In these days of soaring software costs it becomes increasingly important to properly manage a software development project. One element of the management task is the projection and tracking of manpower required to perform the task. In addition, since the total cost of the task is directly related to the initial quality built into the software, it becomes a necessity to project the development manpower in a way to attain that quality. An approach to projecting and tracking manpower with quality in mind is described.

[Quality management in implementing specialist pediatric palliative home care in Lower Saxony, Germany].

PubMed

Kremeike, Kerstin; Eulitz, Nina; Sens, Brigitte; Geraedts, Max; Reinhardt, Dirk

2012-01-01

To provide comprehensive high-quality health care is a great challenge in the context of high specialisation and intensive costs. This problem becomes further aggravated in service areas with low patient numbers and low numbers of specialists. Therefore, a multidimensional approach to quality development was chosen in order to optimise the care of children and adolescents with life-limiting conditions in Lower Saxony, a German federal state with a predominantly rural infrastructure. Different service structures were implemented and a classification of service provider's specialisation was defined on the basis of existing references of professional associations. Measures to optimise care were implemented in a process-oriented manner. High-quality health care can be facilitated by carefully worded requirements concerning the quality of structures combined with optimally designed processes. Parts of the newly implemented paediatric palliative care structures are funded by the statutory health insurance. Copyright © 2012. Published by Elsevier GmbH.

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

NASA Astrophysics Data System (ADS)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

Nondegree Options for Expanding a Leadership Portfolio.

PubMed

Bleich, Michael R; Jones-Schenk, Jan

2016-07-01

Organizational leaders are time-challenged to stay attuned with dynamic health care and business environments, leaving time for professional development at a premium. Beyond interorganizational leadership programs, learning options for nondegree-enhanced education are provided, referencing some of the high-quality, high-volume programs available at no or low cost. J Contin Educ Nurs. 2016;47(7):299-301. Copyright 2016, SLACK Incorporated.

Evidence of Program Quality and Youth Outcomes in the DYCD Out-of-School Time Initiative: Report on the Initiative's First Three Years. Executive Summary

ERIC Educational Resources Information Center

Russell, Christina A.; Mielke, Monia B.; Reisner, Elizabeth R.

2009-01-01

In September 2005, the New York City Department of Youth and Community Development (DYCD) launched the Out-of-School Time Programs for Youth (OST) initiative to provide young people throughout New York City with access to high-quality programming after school, on holidays, and during the summer at no cost to their families. Working closely with…

Integrated agro-hydrological modelling and economic analysis of BMPs to support decision making and policy design

NASA Astrophysics Data System (ADS)

Maroy, E.; Rousseau, A. N.; Hallema, D. W.

2012-12-01

With recent efforts and increasing control over point source pollution of freshwater, agricultural non-point pollution sources have become responsible for most of sediment and nutrient loads in North American water systems. Environmental and agricultural agencies have recognised the need for reducing eutrophication and have developed various policies to compel or encourage producers to best management practices (BMPs). Addressing diffuse pollution is challenging considering the complex and cumulative nature of transport processes, high variability in space and time, and prohibitive costs of distributed water quality monitoring. Many policy options exist to push producers to adopt environmentally desirable behaviour while keeping their activity viable, and ensure equitable costs to consumers and tax payers. On the one hand, economic instruments (subsidies, taxes, water quality markets) are designed to maximize cost-effectiveness, so that farmers optimize their production for maximum profit while implementing BMPs. On the other hand, emission standards or regulation of inputs are often easier and less costly to implement. To study economic and environmental impacts of such policies, a distributed modelling approach is needed to deal with the complexity of the system and the large environmental and socio-economic data requirements. Our objective is to integrate agro-hydrological modelling and economic analysis to support decision and policy making processes of BMP implementation. The integrated modelling system GIBSI was developed in an earlier study within the Canadian WEBs project (Watershed Evaluation of BMPs) to evaluate the influence of BMPs on water quality. The case study involved 30 and 15 year records of discharge and water quality measurements respectively, in the Beaurivage River watershed (Quebec, Canada). GIBSI provided a risk-based overview of the impact of BMPs (including vegetated riparian buffer strips, precision slurry application, conversion to grassland and no-till) in terms of sediment, nutrient and pesticide yields and loads. Input data included characteristics of reservoirs, land cover, soil, agricultural management, livestock management and point sources of pollution. The present study continues from there by first assessing the cost-effectiveness of different sets of BMPs, based on farm budgets and environmental criteria selected by the user. We subsequently examine monetary trade-offs between on-farm costs and social value of water quality improvements using cost-benefit ratios. Because water quality is a non-excludable and non-rivalrous good, its benefits to society are evaluated with non-market evaluation techniques mostly based on quality-constrained recreational use of water. From a policy perspective, cost-effectiveness analysis is very helpful in assisting the decision maker in the highly complex process of defining priorities with respect to BMP strategies. With a user-friendly interface for economic analysis integrated into GIBSI, watershed organizations and stakeholders can use such a tool to promote sustainable agricultural practices and water use. This submission is part of Watershed Evaluation of BMPs project (WEBs) funded by Agriculture and Agri-Food Canada and Ducks Unlimited Canada

Appropriate use of screening and diagnostic tests to foster high-value, cost-conscious care.

PubMed

Qaseem, Amir; Alguire, Patrick; Dallas, Paul; Feinberg, Lawrence E; Fitzgerald, Faith T; Horwitch, Carrie; Humphrey, Linda; LeBlond, Richard; Moyer, Darilyn; Wiese, Jeffrey G; Weinberger, Steven

2012-01-17

Unsustainable rising health care costs in the United States have made reducing costs while maintaining high-quality health care a national priority. The overuse of some screening and diagnostic tests is an important component of unnecessary health care costs. More judicious use of such tests will improve quality and reflect responsible awareness of costs. Efforts to control expenditures should focus not only on benefits, harms, and costs but on the value of diagnostic tests-meaning an assessment of whether a test provides health benefits that are worth its costs or harms. To begin to identify ways that practicing clinicians can contribute to the delivery of high-value, cost-conscious health care, the American College of Physicians convened a workgroup of physicians to identify, using a consensus-based process, common clinical situations in which screening and diagnostic tests are used in ways that do not reflect high-value care. The intent of this exercise is to promote thoughtful discussions about these tests and other health care interventions to promote high-value, cost-conscious care.

Cost-Effectiveness of High Dose Hemodialysis in Comparison to Conventional In-Center Hemodialysis in the Netherlands.

PubMed

Beby, Anna Trisia; Cornelis, Tom; Zinck, Raymund; Liu, Frank Xiaoqing

2016-11-01

In the Netherlands, the current standard of care for treating patients with end-stage renal disease is three sessions of in-center hemodialysis (conventional ICHD). However, the literature indicates that high dose hemodialysis (high dose HD) may provide better health outcome such as survival and quality of life. The objective of this study was to determine the cost-effectiveness of high dose HD, both in-center and at home, in comparison to conventional ICHD from a Dutch payer's perspective over a 5 year period. Additionally, the cost-effectiveness of conventional HD at home in comparison to conventional ICHD will be analysed. A Markov model was developed assuming 28-day treatment cycles and was populated with data from Dutch and international renal registries, official tariffs and medical literature. Univariable and probabilistic sensitivity analyses were performed to test the robustness of the results. Using publicly available tariffs from the Dutch Healthcare Authority (Nederlandse Zorgautoriteit) of 2015, doing high dose ICHD instead of conventional ICHD shows an incremental cost-effectiveness ratio (ICER) of €275,747 per quality-adjusted life year (QALY) gained. In contrast, the ICER of high dose HD at home in comparison to conventional ICHD is €3248 per gained QALY. The final analysis shows that conventional HD at home is less costly per patient (-€3063) than conventional ICHD and results in health benefit improvement (+0.249 QALYs), and is therefore regarded as cost saving. Treating dialysis patients with conventional HD at home shows to be cost saving in comparison to conventional ICHD. However, the magnitude of clinical benefit of high dose HD at home is over two times greater than the clinical benefit of conventional HD at home. According to our analysis, from a payer's perspective, high dose HD should be offered as a home therapy to obtain its clinical benefits in a cost-effective manner. Future research should consider our findings alongside societal factors, such as patient preference, monitoring cost for the home patient, productivity loss and capacity. Baxter BV, The Netherlands.

Launch vehicle systems design analysis

NASA Technical Reports Server (NTRS)

Ryan, Robert; Verderaime, V.

1993-01-01

Current launch vehicle design emphasis is on low life-cycle cost. This paper applies total quality management (TQM) principles to a conventional systems design analysis process to provide low-cost, high-reliability designs. Suggested TQM techniques include Steward's systems information flow matrix method, quality leverage principle, quality through robustness and function deployment, Pareto's principle, Pugh's selection and enhancement criteria, and other design process procedures. TQM quality performance at least-cost can be realized through competent concurrent engineering teams and brilliance of their technical leadership.

Measuring Healthcare Providers' Performances Within Managed Competition Using Multidimensional Quality and Cost Indicators.

PubMed

Portrait, France R M; van der Galiën, Onno; Van den Berg, Bernard

2016-04-01

The Dutch healthcare system is in transition towards managed competition. In theory, a system of managed competition involves incentives for quality and efficiency of provided care. This is mainly because health insurers contract on behalf of their clients with healthcare providers on, potentially, quality and costs. The paper develops a strategy to comprehensively analyse available multidimensional data on quality and costs to assess and report on the relative performance of healthcare providers within managed competition. We had access to individual information on 2409 clients of 19 Dutch diabetes care groups on a broad range of (outcome and process related) quality and cost indicators. We carried out a cost-consequences analysis and corrected for differences in case mix to reduce incentives for risk selection by healthcare providers. There is substantial heterogeneity between diabetes care groups' performances as measured using multidimensional indicators on quality and costs. Better quality diabetes care can be achieved with lower or higher costs. Routine monitoring using multidimensional data on quality and costs merged at the individual level would allow a systematic and comprehensive analysis of healthcare providers' performances within managed competition. Copyright © 2015 John Wiley & Sons, Ltd.

Development of a Whole Slide Imaging System on Smartphones and Evaluation With Frozen Section Samples.

PubMed

Yu, Hong; Gao, Feng; Jiang, Liren; Ma, Shuoxin

2017-09-15

The aim was to develop scalable Whole Slide Imaging (sWSI), a WSI system based on mainstream smartphones coupled with regular optical microscopes. This ultra-low-cost solution should offer diagnostic-ready imaging quality on par with standalone scanners, supporting both oil and dry objective lenses of different magnifications, and reasonably high throughput. These performance metrics should be evaluated by expert pathologists and match those of high-end scanners. The aim was to develop scalable Whole Slide Imaging (sWSI), a whole slide imaging system based on smartphones coupled with optical microscopes. This ultra-low-cost solution should offer diagnostic-ready imaging quality on par with standalone scanners, supporting both oil and dry object lens of different magnification. All performance metrics should be evaluated by expert pathologists and match those of high-end scanners. In the sWSI design, the digitization process is split asynchronously between light-weight clients on smartphones and powerful cloud servers. The client apps automatically capture FoVs at up to 12-megapixel resolution and process them in real-time to track the operation of users, then give instant feedback of guidance. The servers first restitch each pair of FoVs, then automatically correct the unknown nonlinear distortion introduced by the lens of the smartphone on the fly, based on pair-wise stitching, before finally combining all FoVs into one gigapixel VS for each scan. These VSs can be viewed using Internet browsers anywhere. In the evaluation experiment, 100 frozen section slides from patients randomly selected among in-patients of the participating hospital were scanned by both a high-end Leica scanner and sWSI. All VSs were examined by senior pathologists whose diagnoses were compared against those made using optical microscopy as ground truth to evaluate the image quality. The sWSI system is developed for both Android and iPhone smartphones and is currently being offered to the public. The image quality is reliable and throughput is approximately 1 FoV per second, yielding a 15-by-15 mm slide under 20X object lens in approximately 30-35 minutes, with little training required for the operator. The expected cost for setup is approximately US $100 and scanning each slide costs between US $1 and $10, making sWSI highly cost-effective for infrequent or low-throughput usage. In the clinical evaluation of sample-wise diagnostic reliability, average accuracy scores achieved by sWSI-scan-based diagnoses were as follows: 0.78 for breast, 0.88 for uterine corpus, 0.68 for thyroid, and 0.50 for lung samples. The respective low-sensitivity rates were 0.05, 0.05, 0.13, and 0.25 while the respective low-specificity rates were 0.18, 0.08, 0.20, and 0.25. The participating pathologists agreed that the overall quality of sWSI was generally on par with that produced by high-end scanners, and did not affect diagnosis in most cases. Pathologists confirmed that sWSI is reliable enough for standard diagnoses of most tissue categories, while it can be used for quick screening of difficult cases. As an ultra-low-cost alternative to whole slide scanners, diagnosis-ready VS quality and robustness for commercial usage is achieved in the sWSI solution. Operated on main-stream smartphones installed on normal optical microscopes, sWSI readily offers affordable and reliable WSI to resource-limited or infrequent clinical users. ©Hong Yu, Feng Gao, Liren Jiang, Shuoxin Ma. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 15.09.2017.

Algal autolysate medium to label proteins for NMR in mammalian cells.

PubMed

Fuccio, Carmelo; Luchinat, Enrico; Barbieri, Letizia; Neri, Sara; Fragai, Marco

2016-04-01

In-cell NMR provides structural and functional information on proteins directly inside living cells. At present, the high costs of the labeled media for mammalian cells represent a limiting factor for the development of this methodology. Here we report a protocol to prepare a homemade growth medium from Spirulina platensis autolysate, suitable to express uniformly labeled proteins inside mammalian cells at a reduced cost-per-sample. The human proteins SOD1 and Mia40 were overexpressed in human cells grown in (15)N-enriched S. platensis algal-derived medium, and high quality in-cell NMR spectra were obtained.

Applying Organization Theory to Understanding the Adoption and Implementation of Accountable Care Organizations: Commentary.

PubMed

Shortell, Stephen M

2016-12-01

This commentary highights the key arguments and contributions of institutional thoery, transaction cost economics (TCE) theory, high reliability theory, and organizational learning theory to understanding the development and evolution of Accountable Care Organizations (ACOs). Institutional theory and TCE theory primarily emphasize the external influences shaping ACOs while high reliability theory and organizational learning theory underscore the internal fctors influencing ACO perfromance. A framework based on Implementation Science is proposed to conside the multiple perspectives on ACOs and, in particular, their abiity to innovate to achieve desired cost, quality, and population health goals. © The Author(s) 2016.

Scalable, Economical Fabrication Processes for Ultra-Compact Warm-White LEDs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowes, Ted

Conventional warm-white LED component fabrication consists of a large number of sequential steps which are required to incorporate electrical, mechanical, and optical functionality into the component. Each of these steps presents cost and yield challenges which multiply throughout the entire process. Although there has been significant progress in LED fabrication over the last decade, significant advances are needed to enable further reductions in cost per lumen while not sacrificing efficacy or color quality. Cree conducted a focused 18-month program to develop a new low-cost, high-efficiency light emitting diode (LED) architecture enabled by novel large-area parallel processing technologies, reduced number ofmore » fabrication steps, and minimized raw materials use. This new scheme is expected to enable ultra-compact LED components exhibiting simultaneously high efficacy and high color quality. By the end of the program, Cree fabricated warm-white LEDs with a room-temperature “instant on” efficacy of >135 lm/W at ~3500K and 90 CRI (when driven at the DOE baseline current density of 35 A/cm2). Cree modified the conventional LED fabrication process flow in a manner that is expected to translate into simultaneously high throughput and yield for ultra-compact packages. Building on its deep expertise in LED wafer fabrication, Cree developed these ultra-compact LEDs to have no compromises in color quality or efficacy compared to their conventional counterparts. Despite their very small size, the LEDs will also be robustly electrically integrated into luminaire systems with the same attach yield as conventional packages. The versatility of the prototype high-efficacy LED architecture will likely benefit solid-state lighting (SSL) luminaire platforms ranging from bulbs to troffers. We anticipate that the prototype LEDs will particularly benefit luminaires with large numbers of distributed compact packages, such as linear and area luminaires (e.g. troffers). The fraction of total SSL luminaire cost made up by the LEDs themselves has steadily fallen over the past several years, but can still make up 30% or more of the bill of materials; the new LED design will radically lower this proportion. Ultra-compact, highly efficient LEDs with optimal distribution in the system will further benefit luminaire materials and assembly costs by reducing the complexity and volume of thermal management and optical subsystems.« less

Solving the Value Equation: Assessing Surgeon Performance Using Risk-Adjusted Quality-Cost Diagrams and Surgical Outcomes.

PubMed

Knechtle, William S; Perez, Sebastian D; Raval, Mehul V; Sullivan, Patrick S; Duwayri, Yazan M; Fernandez, Felix; Sharma, Joe; Sweeney, John F

Quality-cost diagrams have been used previously to assess interventions and their cost-effectiveness. This study explores the use of risk-adjusted quality-cost diagrams to compare the value provided by surgeons by presenting cost and outcomes simultaneously. Colectomy cases from a single institution captured in the National Surgical Quality Improvement Program database were linked to hospital cost-accounting data to determine costs per encounter. Risk adjustment models were developed and observed average cost and complication rates per surgeon were compared to expected cost and complication rates using the diagrams. Surgeons were surveyed to determine if the diagrams could provide information that would result in practice adjustment. Of 55 surgeons surveyed on the utility of the diagrams, 92% of respondents believed the diagrams were useful. The diagrams seemed intuitive to interpret, and making risk-adjusted comparisons accounted for patient differences in the evaluation.

Health economic analysis of allergen immunotherapy for the management of allergic rhinitis, asthma, food allergy and venom allergy: A systematic overview.

PubMed

Asaria, M; Dhami, S; van Ree, R; Gerth van Wijk, R; Muraro, A; Roberts, G; Sheikh, A

2018-02-01

The European Academy of Allergy and Clinical Immunology (EAACI) is developing guidelines for allergen immunotherapy (AIT) for the management of allergic rhinitis, allergic asthma, IgE-mediated food allergy and venom allergy. To inform the development of clinical recommendations, we undertook systematic reviews to critically assess evidence on the effectiveness, safety and cost-effectiveness of AIT for these conditions. This study focusses on synthesizing data and gaps in the evidence on the cost-effectiveness of AIT for these conditions. We produced summaries of evidence in each domain, and then, synthesized findings on health economic data identified from four recent systematic reviews on allergic rhinitis, asthma, food allergy and venom allergy, respectively. The quality of these studies was independently assessed using the Critical Appraisal Skills Programme tool for health economic evaluations. Twenty-three studies satisfied our inclusion criteria. Of these, 19 studies investigated the cost-effectiveness of AIT in allergic rhinitis, of which seven were based on data from randomized controlled trials with economic evaluations conducted from a health system perspective. This body of evidence suggested that sublingual immunotherapy (SLIT) and subcutaneous immunotherapy (SCIT) would be considered cost-effective using the (English) National Institute for Health and Clinical Excellence (NICE) cost-effectiveness threshold of £20 000/quality-adjusted life year (QALY). However, the quality of the studies and the general lack of attention to characterizing uncertainty and handling missing data should be taken into account when interpreting these results. For asthma, there were three eligible studies, all of which had significant methodological limitations; these suggested that SLIT, when used in patients with both asthma and allergic rhinitis, may be cost-effective with an incremental cost-effectiveness ratio (ICER) of £10 726 per QALY. We found one economic modelling study for venom allergy which, despite being based largely on expert opinion and plausible assumptions, suggested that AIT for bee and wasp venom allergy is only likely to be cost-effective for very high-risk groups who may be exposed to multiple exposures to venom/year (eg bee keepers). We found no eligible studies investigating the cost-effectiveness of AIT for food allergy. Overall, the evidence to support the cost-effectiveness of AIT is limited and of low methodological quality, but suggests that AIT may be cost-effective for people with allergic rhinitis with or without asthma and in high-risk subgroups for venom allergy. We were unable to draw any conclusions on the cost-effectiveness of AIT for food allergy. © 2017 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

Economic impact of medication non-adherence by disease groups: a systematic review.

PubMed

Cutler, Rachelle Louise; Fernandez-Llimos, Fernando; Frommer, Michael; Benrimoj, Charlie; Garcia-Cardenas, Victoria

2018-01-21

To determine the economic impact of medication non-adherence across multiple disease groups. Systematic review. A comprehensive literature search was conducted in PubMed and Scopus in September 2017. Studies quantifying the cost of medication non-adherence in relation to economic impact were included. Relevant information was extracted and quality assessed using the Drummond checklist. Seventy-nine individual studies assessing the cost of medication non-adherence across 14 disease groups were included. Wide-scoping cost variations were reported, with lower levels of adherence generally associated with higher total costs. The annual adjusted disease-specific economic cost of non-adherence per person ranged from $949 to $44 190 (in 2015 US$). Costs attributed to 'all causes' non-adherence ranged from $5271 to $52 341. Medication possession ratio was the metric most used to calculate patient adherence, with varying cut-off points defining non-adherence. The main indicators used to measure the cost of non-adherence were total cost or total healthcare cost (83% of studies), pharmacy costs (70%), inpatient costs (46%), outpatient costs (50%), emergency department visit costs (27%), medical costs (29%) and hospitalisation costs (18%). Drummond quality assessment yielded 10 studies of high quality with all studies performing partial economic evaluations to varying extents. Medication non-adherence places a significant cost burden on healthcare systems. Current research assessing the economic impact of medication non-adherence is limited and of varying quality, failing to provide adaptable data to influence health policy. The correlation between increased non-adherence and higher disease prevalence should be used to inform policymakers to help circumvent avoidable costs to the healthcare system. Differences in methods make the comparison among studies challenging and an accurate estimation of true magnitude of the cost impossible. Standardisation of the metric measures used to estimate medication non-adherence and development of a streamlined approach to quantify costs is required. CRD42015027338. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Percutaneous Ventricular Assist Devices: A Health Technology Assessment

PubMed Central

Lee, Christine; Djalalov, Sandjar; Xie, Xuanqian; Holubowich, Corinne

2017-01-01

Background Percutaneous coronary intervention (PCI)—using a catheter to place a stent to keep blood vessels open—is increasingly used for high-risk patients who cannot undergo surgery. Cardiogenic shock (when the heart suddenly cannot pump enough blood) is associated with a high mortality rate. The percutaneous ventricular assist device can help control blood pressure and increase blood flow in these high-risk conditions. This health technology assessment examined the benefits, harms, and budget impact of the Impella percutaneous ventricular assist device in high-risk PCI and cardiogenic shock. We also analyzed cost-effectiveness of the Impella device in high-risk PCI. Methods We performed a systematic search of the literature for studies examining the effects of the Impella percutaneous ventricular assist device in high-risk PCI and cardiogenic shock, and appraised the evidence according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria, focusing on hemodynamic stability, mortality, major adverse cardiac events, bleeding, and vascular complications. We developed a Markov decision-analytical model to assess the cost- effectiveness of Impella devices versus intra-aortic balloon pumps (IABPs), calculated incremental cost-effectiveness ratios (ICERs) using a 10-year time horizon, and conducted sensitivity analyses to examine the robustness of the estimates. The economic model was conducted from the perspective of the Ontario Ministry of Health and Long-Term Care. Results Eighteen studies (one randomized controlled trial and 10 observational studies for high-risk PCI, and one randomized controlled trial and six observational studies for cardiogenic shock) were included in the clinical review. Compared with IABPs, Impella 2.5, one model of the device, improved hemodynamic parameters (GRADE low–very low) but showed no significant difference in mortality (GRADE low), major adverse cardiac events (GRADE low), bleeding (GRADE low), or vascular complications (GRADE low) in high-risk PCI and cardiogenic shock. No randomized controlled trials or prospective observational studies with a control group have studied Impella CP and Impella 5.0 (other models of the device) in patients undergoing high-risk PCI or patients with cardiogenic shock. The economic model predicted that treatment with the Impella device would have fewer quality-adjusted life-years (QALYs) and higher costs than IABP in high-risk PCI patients. These observations were consistent even when uncertainty in model inputs and parameters was considered. We estimated that adopting Impella would increase costs by $2.9 to $11.5 million per year. Conclusions On the basis of evidence of low to very low quality, Impella 2.5 devices were associated with improved hemodynamic stability, but had mortality rates and safety profile similar to IABPs in high-risk PCI and cardiogenic shock. Our cost-effectiveness analysis indicated that Impella 2.5 is likely associated with greater costs and fewer quality-adjusted life years than IABP. PMID:28232854

Cost-utility analyses of drug therapies in breast cancer: a systematic review.

PubMed

Nerich, Virginie; Saing, Sopany; Gamper, Eva Maria; Kemmler, Georg; Daval, Franck; Pivot, Xavier; Holzner, Bernhard

2016-10-01

The economic evaluation (EE) of health care products has become a necessity. Their quality must be high in order to trust the results and make informed decisions. While cost-utility analyses (CUAs) should be preferred to cost-effectiveness analyses in the oncology area, the quality of breast cancer (BC)-related CUA has been given little attention so far. Thus, firstly, a systematic review of published CUA related to drug therapies for BC, gene expression profiling, and HER2 status testing was performed. Secondly, the quality of selected CUA was assessed and the factors associated with a high-quality CUA identified. The systematic literature search was conducted in PubMed, MEDLINE/EMBASE, and Cochrane to identify published CUA between 2000 and 2014. After screening and data extraction, the quality of each selected CUA was assessed by two independent reviewers, using the checklist proposed by Drummond et al. The analysis of factors associated with a high-quality CUA (defined as a Drummond score ≥7) was performed using a two-step approach. Our systematic review was based on 140 CUAs and showed a wide variety of methodological approaches, including differences in the perspective adopted, the time horizon, measurement of cost and effectiveness, and more specially health-state utility values (HSUVs). The median Drummond score was 7 [range 3-10]. Only one in two of the CUA (n = 74) had a Drummond score ≥7, synonymous of "high quality." The statistically significant predictors of a high-quality CUA were article with "gene expression profiling" topic (p = 0.001), consulting or pharmaceutical company as main location of first author (p = 0.004), and articles with both incremental cost-utility ratio and incremental cost-effectiveness ratio as outcomes of EE (p = 0.02). Our systematic review identified only 140 CUAs published over the past 15 years with one in two of high quality. It showed a wide variety of methodological approaches, especially focused on HSUVs. A critical appraisal of utility values is necessary to better understand one of the main difficulties encountered by authors and propose areas for improvement to increase the quality of CUA. Since the last 5 years, there is a tendency toward an improvement in the quality of these studies, probably coupled with economic context, a better and widely spreading of recommendations and thus appropriation by medical practitioners. That being said, there is an urgent need for mandatory use of European and international recommendations to ensure quality of such approaches and to allow easy comparison.

Economic evaluation of a psychological intervention for high distress cancer patients and carers: costs and quality-adjusted life years.

PubMed

Chatterton, Mary Lou; Chambers, Suzanne; Occhipinti, Stefano; Girgis, Afaf; Dunn, Jeffrey; Carter, Rob; Shih, Sophy; Mihalopoulos, Cathrine

2016-07-01

This study compared the cost-effectiveness of a psychologist-led, individualised cognitive behavioural intervention (PI) to a nurse-led, minimal contact self-management condition for highly distressed cancer patients and carers. This was an economic evaluation conducted alongside a randomised trial of highly distressed adult cancer patients and carers calling cancer helplines. Services used by participants were measured using a resource use questionnaire, and quality-adjusted life years were measured using the assessment of quality of life - eight-dimension - instrument collected through a computer-assisted telephone interview. The base case analysis stratified participants based on the baseline score on the Brief Symptom Inventory. Incremental cost-effectiveness ratio confidence intervals were calculated with a nonparametric bootstrap to reflect sampling uncertainty. The results were subjected to sensitivity analysis by varying unit costs for resource use and the method for handling missing data. No significant differences were found in overall total costs or quality-adjusted life years (QALYs) between intervention groups. Bootstrapped data suggest the PI had a higher probability of lower cost and greater QALYs for both carers and patients with high distress at baseline. For patients with low levels of distress at baseline, the PI had a higher probability of greater QALYs but at additional cost. Sensitivity analysis showed the results were robust. The PI may be cost-effective compared with the nurse-led, minimal contact self-management condition for highly distressed cancer patients and carers. More intensive psychological intervention for patients with greater levels of distress appears warranted. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

An Evidence-Based Approach to Estimating the National and State Costs of PreK-3rd. FCD Policy Brief Advancing PK-3rd. No.10

ERIC Educational Resources Information Center

Picus, Lawrence O.; Odden, Allan; Goetz, Michael

2009-01-01

This study estimates the costs of providing a high-quality PreK-3rd education approach in all 50 states plus the District of Columbia. Relying on an Evidence-Based approach to school finance adequacy, it identifies the staffing resources needed to offer high-quality integrated PreK-3rd programs and then estimates the costs of those resources. By…

Cost-effectiveness analyses in orthopaedic sports medicine: a systematic review.

PubMed

Nwachukwu, Benedict U; Schairer, William W; Bernstein, Jaime L; Dodwell, Emily R; Marx, Robert G; Allen, Answorth A

2015-06-01

As increasing attention is paid to the cost of health care delivered in the United States (US), cost-effectiveness analyses (CEAs) are gaining in popularity. Reviews of the CEA literature have been performed in other areas of medicine, including some subspecialties within orthopaedics. Demonstrating the value of medical procedures is of utmost importance, yet very little is known about the overall quality and findings of CEAs in sports medicine. To identify and summarize CEA studies in orthopaedic sports medicine and to grade the quality of the available literature. Systematic review. A systematic review of the literature was performed to compile findings and grade the methodological quality of US-based CEA studies in sports medicine. The Quality of Health Economic Studies (QHES) instrument and the checklist by the US Panel on Cost-effectiveness in Health and Medicine were used to assess study quality. One-sided Fisher exact testing was performed to analyze the predictors of high-quality CEAs. Twelve studies met inclusion criteria. Five studies examined anterior cruciate ligament reconstruction, 3 studies examined rotator cuff repair, 2 examined autologous chondrocyte implantation, 1 study examined hip arthroscopic surgery, and 1 study examined the operative management of shoulder dislocations. Based on study findings, operative intervention in sports medicine is highly cost-effective. The quality of published evidence is good, with a mean quality score of 81.8 (range, 70-94). There is a trend toward higher quality in more recent publications. No significant predictor of high-quality evidence was found. The CEA literature in sports medicine is good; however, there is a paucity of studies, and the available evidence is focused on a few procedures. More work needs to be conducted to quantify the cost-effectiveness of different techniques and procedures within sports medicine. The QHES tool may be useful for the evaluation of future CEAs. © 2014 The Author(s).

Officer Career Development: A Review of the Civilian and Military Research Literature on Turnover and Retention

DTIC Science & Technology

1991-09-01

balance of costs associated with turnover and the costs associated with retaining employees. Under this approach, the optimal level of aggregate turnover...behavior psychiatric technicians psychological attachment push/pull models quality of life quality of service quality of worklife questionnaires race

Flat-plate solar array project. Volume 3: Silicon sheet: Wafers and ribbons

NASA Technical Reports Server (NTRS)

Briglio, A.; Dumas, K.; Leipold, M.; Morrison, A.

1986-01-01

The primary objective of the Silicon Sheet Task of the Flat-Plate Solar Array (FSA) Project was the development of one or more low cost technologies for producing silicon sheet suitable for processing into cost-competitive solar cells. Silicon sheet refers to high purity crystalline silicon of size and thickness for fabrication into solar cells. Areas covered in the project were ingot growth and casting, wafering, ribbon growth, and other sheet technologies. The task made and fostered significant improvements in silicon sheet including processing of both ingot and ribbon technologies. An additional important outcome was the vastly improved understanding of the characteristics associated with high quality sheet, and the control of the parameters required for higher efficiency solar cells. Although significant sheet cost reductions were made, the technology advancements required to meet the task cost goals were not achieved.

To The Biorefinery: Delivered Forestland and Agricultural Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-06-01

It can be challenging and costly to transport biomass feedstock supplies from the roadside, or farmgate, to a biorefinery. Given the geographic dispersion and lowbulk density of cellulosic feedstocks, cost effective scaling of commercial biorefinery operations requires overcoming many challenges. The Biomass Research and Development Board’s Feedstock Logistics Interagency Working Group identified four primary barriers related to biorefinery commercialization: • Capacity and efficiency of harvest and collection equipment • High-moisture content leading to degradation of biomass • Variable biomass quality upon arrival at the biorefinery • Costly transportation options.1 Further, feedstock supply systems do not currently mitigate risks such asmore » low crop yield, fire, or competition for resource use. Delivery and preprocessing improvements will allow for the development of a commercial-scale bioenergy industry that achieves national production and cost targets.« less

Targeted screening and treatment for latent tuberculosis infection using QuantiFERON-TB Gold is cost-effective in Mexico.

PubMed

Burgos, J L; Kahn, J G; Strathdee, S A; Valencia-Mendoza, A; Bautista-Arredondo, S; Laniado-Laborin, R; Castañeda, R; Deiss, R; Garfein, R S

2009-08-01

To assess the cost-effectiveness of screening for latent tuberculosis infection (LTBI) using a commercially available detection test and treating individuals at high risk for human immunodeficiency virus (HIV) infection in a middle-income country. We developed a Markov model to evaluate the cost per LTBI case detected, TB case averted and quality-adjusted life year (QALY) gained for a cohort of 1000 individuals at high risk for HIV infection over 20 years. Baseline model inputs for LTBI prevalence were obtained from published literature and cross-sectional data from tuberculosis (TB) screening using QuantiFERON-TB Gold In-Tube (QFT-GIT) testing among sex workers and illicit drug users at high risk for HIV recruited through street outreach in Tijuana, Mexico. Costs are reported in 2007 US dollars. Future costs and QALYs were discounted at 3% per year. Sensitivity analyses were performed to evaluate model robustness. Over 20 years, we estimate the program would prevent 78 cases of active TB and 55 TB-related deaths. The incremental cost per case of LTBI detected was US$730, cost per active TB averted was US$529 and cost per QALY gained was US$108. In settings of endemic TB and escalating HIV incidence, targeting LTBI screening and treatment among high-risk groups may be highly cost-effective.

Targeted screening and treatment for latent tuberculosis infection using QuantiFERON®-TB Gold is cost-effective in Mexico

PubMed Central

Burgos, J. L.; Kahn, J. G.; Strathdee, S. A.; Valencia-Mendoza, A.; Bautista-Arredondo, S.; Laniado-Laborin, R.; Castañeda, R.; Deiss, R.; Garfein, R. S.

2009-01-01

SUMMARY OBJECTIVE To assess the cost-effectiveness of screening for latent tuberculosis infection (LTBI) using a commercially available detection test and treating individuals at high risk for human immunodeficiency virus (HIV) infection in a middle-income country. DESIGN We developed a Markov model to evaluate the cost per LTBI case detected, TB case averted and quality-adjusted life year (QALY) gained for a cohort of 1000 individuals at high risk for HIV infection over 20 years. Baseline model inputs for LTBI prevalence were obtained from published literature and cross-sectional data from tuberculosis (TB) screening using QuantiFERON®-TB Gold In-Tube (QFT-GIT) testing among sex workers and illicit drug users at high risk for HIV recruited through street outreach in Tijuana, Mexico. Costs are reported in 2007 US dollars. Future costs and QALYs were discounted at 3% per year. Sensitivity analyses were performed to evaluate model robustness. RESULTS Over 20 years, we estimate the program would prevent 78 cases of active TB and 55 TB-related deaths. The incremental cost per case of LTBI detected was US$730, cost per active TB averted was US$529 and cost per QALY gained was US$108. CONCLUSIONS In settings of endemic TB and escalating HIV incidence, targeting LTBI screening and treatment among high-risk groups may be highly cost-effective. PMID:19723375

Health care competition, strategic mission, and patient satisfaction: research model and propositions

PubMed Central

Rivers, Patrick A.; Glover, Saundra H.

2010-01-01

Purpose In all industries, competition among businesses has long been encouraged as a mechanism to increase value for patients. In other words, competition ensures the provision of better products and services to satisfy the needs of customers This paper aims to develop a model that can be used to empirically investigate a number of complex issues and relationships associated with competition in the health care industry. Design/methodology/approach A literature review was conducted. A total of 50 items of literature related to the subject were reviewed.. Various perspectives of competition, the nature of service quality, health system costs, and patient satisfaction in health care are examined Findings A model of the relationship among these variables is developed. The model depicts patient satisfaction as an outcome measure directly dependent on competition. Quality of care and health care systems costs, while also directly dependent on the strategic mission and goals, are considered as determinants of customer satisfaction as well. The model is discussed in the light of propositions for empirical research. Practical implications Empirical studies based on the model proposed in this paper should help identify areas with significant impact on patient satisfaction while maintaining high quality of service at lower costs in a competitive environment. Originality/value The authors develop a research model which included propositions to examine the complex issues of competition in the health care industry. PMID:19579575

Value of Pediatric Orthopaedic Surgery.

PubMed

Kocher, Mininder S

2015-01-01

Value has become the buzzword of contemporaneous health care reform. Value is defined as outcomes relative to costs. Orthopaedic surgery has come under increasing scrutiny due to high procedural costs. However, orthopaedic surgery may actually be a great value given the benefits of treatment. The American Academy of Orthopaedic Surgeons (AAOS) Value Project team was tasked to develop a model for assessing the benefits of orthopaedic surgery including indirect costs related to productivity and health-related quality of life. This model was applied to 5 orthopaedic conditions demonstrating robust societal and economic value. In all cost-effectiveness models, younger patients demonstrated greater cost-effectiveness given increased lifespan and productivity. This has tremendous implications within the field of pediatric orthopedic surgery. Pediatric orthopaedics may be the best value in medicine!

Improving organizational climate for excellence in patient care.

PubMed

Arnold, Edwin

2013-01-01

Managers in health care organizations today are expected to achieve higher-quality patient care at a lower cost. Developing and maintaining a positive organizational climate can help improve motivation and foster higher employee performance. In turn, this will help the organization deliver better patient care at a lower cost. This article offers metrics for assessing organizational climate, analyzes barriers to a positive climate, and explores strategies that managers can use to build the type of climate that fosters high performance.

The Productivity Push: System-Wide Reform Allows Arizona to Serve More Students. Lumina Foundation Focus[TM]. Summer 2010

ERIC Educational Resources Information Center

Giegerich, Steve

2010-01-01

Today, the United States spends about twice as much on higher education as the average developed nation, but many other countries are doing a better job of graduating more students at substantially lower expense. To provide more high-quality degrees and credentials at lower cost, colleges and universities must become high-performing institutions.…

A variation reduction allocation model for quality improvement to minimize investment and quality costs by considering suppliers’ learning curve

NASA Astrophysics Data System (ADS)

Rosyidi, C. N.; Jauhari, WA; Suhardi, B.; Hamada, K.

2016-02-01

Quality improvement must be performed in a company to maintain its product competitiveness in the market. The goal of such improvement is to increase the customer satisfaction and the profitability of the company. In current practice, a company needs several suppliers to provide the components in assembly process of a final product. Hence quality improvement of the final product must involve the suppliers. In this paper, an optimization model to allocate the variance reduction is developed. Variation reduction is an important term in quality improvement for both manufacturer and suppliers. To improve suppliers’ components quality, the manufacturer must invest an amount of their financial resources in learning process of the suppliers. The objective function of the model is to minimize the total cost consists of investment cost, and quality costs for both internal and external quality costs. The Learning curve will determine how the employee of the suppliers will respond to the learning processes in reducing the variance of the component.

In-line charge-trapping characterization of dielectrics for sub-0.5-um CMOS technologies

NASA Astrophysics Data System (ADS)

Roy, Pradip K.; Chacon, Carlos M.; Ma, Yi; Horner, Gregory

1997-09-01

The advent of ultra-large and giga-scale-integration (ULSI/GSI) has placed considerable emphasis on the development of new gate oxides and interlevel dielectrics capable of meeting strict performance and reliability requirements. The costs and demands associated with ULSI fabrication have in turn fueled the need for cost-effective, rapid and accurate in-line characterization techniques for evaluating dielectric quality. The use of non-contact surface photovoltage characterization techniques provides cost-effective rapid feedback on dielectric quality, reducing costs through the reutilization of control wafers and the elimination of processing time. This technology has been applied to characterize most of the relevant C-V parameters, including flatband voltage (Vfb), density of interface traps (Dit), mobile charge density (Qm), oxide thickness (Tox), oxide resistivity (pox) and total charge (Qtot) for gate and interlevel (ILO) oxides. A novel method of measuring tunneling voltage by this technique on various gate oxides is discussed. For ILO, PECVD and high density plasma dielectrics, surface voltage maps are also presented. Measurements of near-surface silicon quality are described, including minority carrier generation lifetime, and examples of their application in diagnosing manufacturing problems.

Measuring and Costing Quality in Education: Using Quality and Productivity Methods To Improve Schools.

ERIC Educational Resources Information Center

Spanbauer, Stanley J.

The Measurement and Costing Model (MCM) described in this book was developed and tested at Fox Valley Technical College (FVTC), Wisconsin, to enhance the college's quality improvement process and to serve as a guide to other institutions interested in improving their quality. The book presents a description of the model and outlines seven steps…

Extending the cost-benefit model of thermoregulation: high-temperature environments.

PubMed

Vickers, Mathew; Manicom, Carryn; Schwarzkopf, Lin

2011-04-01

The classic cost-benefit model of ectothermic thermoregulation compares energetic costs and benefits, providing a critical framework for understanding this process (Huey and Slatkin 1976 ). It considers the case where environmental temperature (T(e)) is less than the selected temperature of the organism (T(sel)), and it predicts that, to minimize increasing energetic costs of thermoregulation as habitat thermal quality declines, thermoregulatory effort should decrease until the lizard thermoconforms. We extended this model to include the case where T(e) exceeds T(sel), and we redefine costs and benefits in terms of fitness to include effects of body temperature (T(b)) on performance and survival. Our extended model predicts that lizards will increase thermoregulatory effort as habitat thermal quality declines, gaining the fitness benefits of optimal T(b) and maximizing the net benefit of activity. Further, to offset the disproportionately high fitness costs of high T(e) compared with low T(e), we predicted that lizards would thermoregulate more effectively at high values of T(e) than at low ones. We tested our predictions on three sympatric skink species (Carlia rostralis, Carlia rubrigularis, and Carlia storri) in hot savanna woodlands and found that thermoregulatory effort increased as thermal quality declined and that lizards thermoregulated most effectively at high values of T(e).

A Systematic Review and Narrative Synthesis of Health Economic Studies Conducted for Hereditary Haemochromatosis.

PubMed

de Graaff, Barbara; Neil, Amanda; Sanderson, Kristy; Si, Lei; Yee, Kwang Chien; Palmer, Andrew J

2015-10-01

Hereditary haemochromatosis (HH) is a common genetic condition amongst people of northern European heritage. HH is associated with increased iron absorption leading to parenchymal organ damage and multiple arthropathies. Early diagnosis and treatment prevents complications. Population screening may increase early diagnosis, but no programmes have been introduced internationally: a paucity of health economic data is often cited as a barrier. To conduct a systematic review of all health economic studies in HH. Studies were identified through electronic searching of economic/biomedical databases. Any study on HH with original economic component was included. Study quality was formally assessed. Health economic data were extracted and analysed through narrative synthesis. Thirty-eight studies met the inclusion criteria. The majority of papers reported on costs or cost effectiveness of screening programmes. Whilst most concluded screening was cost effective compared with no screening, methodological flaws limit the quality of these findings. Assumptions regarding clinical penetrance, effectiveness of screening, health-state utility values (HSUVs), exclusion of early symptomatology (such as fatigue, lethargy and multiple arthropathies) and quantification of costs associated with HH were identified as key limitations. Treatment studies concluded therapeutic venepuncture was the most cost-effective intervention. There is a paucity of high-quality health economic studies relating to HH. The development of a comprehensive HH cost-effectiveness model utilising HSUVs is required to determine whether screening is worthwhile.

High quality, patient centred and coordinated care for Alstrom syndrome: a model of care for an ultra-rare disease.

PubMed

Van Groenendael, Stephanie; Giacovazzi, Luca; Davison, Fabian; Holtkemper, Oliver; Huang, Zexin; Wang, Qiaoying; Parkinson, Kay; Barrett, Timothy; Geberhiwot, Tarekegn

2015-11-24

Patients with rare and ultra-rare diseases make heavy demands on the resources of both health and social services, but these resources are often used inefficiently due to delays in diagnosis, poor and fragmented care. We analysed the national service for an ultra-rare disease, Alstrom syndrome, and compared the outcome and cost of the service to the standard care. Between the 9th and 26th of March 2014 we undertook a cross-sectional study of the UK Alstrom syndrome patients and their carers. We developed a semi-structured questionnaire to assess our rare patient need, quality of care and costs incurred to patients and their careers. In the UK all Alstrom syndrome patients are seen in two centres, based in Birmingham, and we systematically evaluated the national service and compared the quality and cost of care with patients' previous standard of care. One quarter of genetically confirmed Alstrom syndrome UK patients were enrolled in this study. Patients that have access to a highly specialised clinical service reported that their care is well organised, personalised, holistic, and that they have a say in their care. All patients reported high level of satisfaction in their care. Patient treatment compliance and clinic attendance was better in multidisciplinary clinic than the usual standard of NHS care. Following a variable costing approach based on personnel and consumables' cost, our valuation of the clinics was just under £700/patient/annum compared to the standard care of £960/patient/annum. Real savings, however, came in terms of patients' quality of life. Furthermore there was found to have been a significant reduction in frequency of clinic visits and ordering of investigations since the establishment of the national service. Our study has shown that organised, multidisciplinary "one stop" clinics are patient centred and individually tailored to the patient need with a better outcome and comparable cost compared with the current standard of care for rare disease. Our proposed care model can be adapted to several other rare and ultra-rare diseases.

Quality politics: an immaterial investment for companies in (micro)electronics

NASA Astrophysics Data System (ADS)

Bacivarov, I. C.; Lupan, R.; Robledo, C.; Bacivarov, Angelica

2010-11-01

With the globalization of the markets and the growth of competitiveness in the manufacturing sector, quality has become a key factor of success. Quality is particularly important for the companies which activate in the micro(electronics) field. The quality management system holds a vital place in the company's structure. Implementing such a system requires important operating costs. These costs are known as Quality Obtaining Costs (QOC) and may be considered as an investment. Planning an investment, means evaluating its return in order to see if it is profitable or not. Measuring the return of quality politics investment raise some delicate problems. We may calculate some aspects of the return of investment by measuring the shape of non-quality costs. An eventual decrease of these costs could be synonym with a profitable investment. But the advantages of good quality politics cannot be measured only by taking into consideration the non-quality costs (even if they include direct and indirect costs). There are also intangible advantages (like mark image, competences, polyvalence, client's satisfaction...) that derive from quality approaches. How to evaluate this type of consequences / advantages? The idea developed in this article is to considerate the quality politics like un immaterial/intelligent investment. Therefore could it be advantageous / possible to use the immaterial investment's measuring and evaluation techniques for studying the quality politics return of investment?

Application of a newly developed software program for image quality assessment in cone-beam computed tomography.

PubMed

de Oliveira, Marcus Vinicius Linhares; Santos, António Carvalho; Paulo, Graciano; Campos, Paulo Sergio Flores; Santos, Joana

2017-06-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

Cost-effectiveness of population-based, community, workplace and individual policies for diabetes prevention in the UK.

PubMed

Breeze, P R; Thomas, C; Squires, H; Brennan, A; Greaves, C; Diggle, P; Brunner, E; Tabak, A; Preston, L; Chilcott, J

2017-08-01

To analyse the cost-effectiveness of different interventions for Type 2 diabetes prevention within a common framework. A micro-simulation model was developed to evaluate the cost-effectiveness of a range of diabetes prevention interventions including: (1) soft drinks taxation; (2) retail policy in socially deprived areas; (3) workplace intervention; (4) community-based intervention; and (5) screening and intensive lifestyle intervention in individuals with high diabetes risk. Within the model, individuals follow metabolic trajectories (for BMI, cholesterol, systolic blood pressure and glycaemia); individuals may develop diabetes, and some may exhibit complications of diabetes and related disorders, including cardiovascular disease, and eventually die. Lifetime healthcare costs, employment costs and quality-adjusted life-years are collected for each person. All interventions generate more life-years and lifetime quality-adjusted life-years and reduce healthcare spending compared with doing nothing. Screening and intensive lifestyle intervention generates greatest lifetime net benefit (£37) but is costly to implement. In comparison, soft drinks taxation or retail policy generate lower net benefit (£11 and £11) but are cost-saving in a shorter time period, preferentially benefit individuals from deprived backgrounds and reduce employer costs. The model enables a wide range of diabetes prevention interventions to be evaluated according to cost-effectiveness, employment and equity impacts over the short and long term, allowing decision-makers to prioritize policies that maximize the expected benefits, as well as fulfilling other policy targets, such as addressing social inequalities. © 2017 The Authors. Diabetic Medicine published by John Wiley & Sons Ltd on behalf of Diabetes UK.

Is procalcitonin-guided antimicrobial use cost-effective in adult patients with suspected bacterial infection and sepsis?

PubMed

Harrison, Michelle; Collins, Curtis D

2015-03-01

Procalcitonin has emerged as a promising biomarker of bacterial infection. Published literature demonstrates that use of procalcitonin testing and an associated treatment pathway reduces duration of antibiotic therapy without impacting mortality. The objective of this study was to determine the financial impact of utilizing a procalcitonin-guided treatment algorithm in hospitalized patients with sepsis. Cost-minimization and cost-utility analysis. Hypothetical cohort of adult ICU patients with suspected bacterial infection and sepsis. Utilizing published clinical and economic data, a decision analytic model was developed from the U.S. hospital perspective. Effectiveness and utility measures were defined using cost-per-clinical episode and cost per quality-adjusted life years (QALYs). Upper and lower sensitivity ranges were determined for all inputs. Univariate and probabilistic sensitivity analyses assessed the robustness of our model and variables. Incremental cost-effectiveness ratios (ICERs) were calculated and compared to predetermined willingness-to-pay thresholds. Base-case results predicted the use of a procalcitonin-guided treatment algorithm dominated standard care with improved quality (0.0002 QALYs) and decreased overall treatment costs ($65). The model was sensitive to a number of key variables that had the potential to impact results, including algorithm adherence (<42.3%), number and cost of procalcitonin tests ordered (≥9 and >$46), days of antimicrobial reduction (<1.6 d), incidence of nephrotoxicity and rate of nephrotoxicity reduction. The combination of procalcitonin testing with an evidence-based treatment algorithm may improve patients' quality of life while decreasing costs in ICU patients with suspected bacterial infection and sepsis; however, results were highly dependent on a number of variables and assumptions.

Simulation reduction using the Taguchi method

NASA Technical Reports Server (NTRS)

Mistree, Farrokh; Lautenschlager, Ume; Erikstad, Stein Owe; Allen, Janet K.

1993-01-01

A large amount of engineering effort is consumed in conducting experiments to obtain information needed for making design decisions. Efficiency in generating such information is the key to meeting market windows, keeping development and manufacturing costs low, and having high-quality products. The principal focus of this project is to develop and implement applications of Taguchi's quality engineering techniques. In particular, we show how these techniques are applied to reduce the number of experiments for trajectory simulation of the LifeSat space vehicle. Orthogonal arrays are used to study many parameters simultaneously with a minimum of time and resources. Taguchi's signal to noise ratio is being employed to measure quality. A compromise Decision Support Problem and Robust Design are applied to demonstrate how quality is designed into a product in the early stages of designing.

Development, Validation, and Implementation of a Clinic Nurse Staffing Guideline.

PubMed

Deeken, Debra Jean; Wakefield, Douglas; Kite, Cora; Linebaugh, Jeanette; Mitchell, Blair; Parkinson, Deidre; Misra, Madhukar

2017-10-01

Ensuring that the level of nurse staffing used to care for patients is appropriate to the setting and service intensity is essential for high-quality and cost-effective care. This article describes the development, validation, and implementation of the clinic technical skills permission list developed specifically to guide nurse staffing decisions in physician clinics of an academic medical center. Results and lessons learned in using this staffing guideline are presented.

Diagnostic staging laparoscopy in gastric cancer treatment: A cost-effectiveness analysis.

PubMed

Li, Kevin; Cannon, John G D; Jiang, Sam Y; Sambare, Tanmaya D; Owens, Douglas K; Bendavid, Eran; Poultsides, George A

2018-05-01

Accurate preoperative staging helps avert morbidity, mortality, and cost associated with non-therapeutic laparotomy in gastric cancer (GC) patients. Diagnostic staging laparoscopy (DSL) can detect metastases with high sensitivity, but its cost-effectiveness has not been previously studied. We developed a decision analysis model to assess the cost-effectiveness of preoperative DSL in GC workup. Analysis was based on a hypothetical cohort of GC patients in the U.S. for whom initial imaging shows no metastases. The cost-effectiveness of DSL was measured as cost per quality-adjusted life-year (QALY) gained. Drivers of cost-effectiveness were assessed in sensitivity analysis. Preoperative DSL required an investment of $107 012 per QALY. In sensitivity analysis, DSL became cost-effective at a threshold of $100 000/QALY when the probability of occult metastases exceeded 31.5% or when test sensitivity for metastases exceeded 86.3%. The likelihood of cost-effectiveness increased from 46% to 93% when both parameters were set at maximum reported values. The cost-effectiveness of DSL for GC patients is highly dependent on patient and test characteristics, and is more likely when DSL is used selectively where procedure yield is high, such as for locally advanced disease or in detecting peritoneal and superficial versus deep liver lesions. © 2017 Wiley Periodicals, Inc.

Prediction of specialty coffee cup quality based on near infrared spectra of green coffee beans.

PubMed

Tolessa, Kassaye; Rademaker, Michael; De Baets, Bernard; Boeckx, Pascal

2016-04-01

The growing global demand for specialty coffee increases the need for improved coffee quality assessment methods. Green bean coffee quality analysis is usually carried out by physical (e.g. black beans, immature beans) and cup quality (e.g. acidity, flavour) evaluation. However, these evaluation methods are subjective, costly, time consuming, require sample preparation and may end up in poor grading systems. This calls for the development of a rapid, low-cost, reliable and reproducible analytical method to evaluate coffee quality attributes and eventually chemical compounds of interest (e.g. chlorogenic acid) in coffee beans. The aim of this study was to develop a model able to predict coffee cup quality based on NIR spectra of green coffee beans. NIR spectra of 86 samples of green Arabica beans of varying quality were analysed. Partial least squares (PLS) regression method was used to develop a model correlating spectral data to cupping score data (cup quality). The selected PLS model had a good predictive power for total specialty cup quality and its individual quality attributes (overall cup preference, acidity, body and aftertaste) showing a high correlation coefficient with r-values of 90, 90,78, 72 and 72, respectively, between measured and predicted cupping scores for 20 out of 86 samples. The corresponding root mean square error of prediction (RMSEP) was 1.04, 0.22, 0.27, 0.24 and 0.27 for total specialty cup quality, overall cup preference, acidity, body and aftertaste, respectively. The results obtained suggest that NIR spectra of green coffee beans are a promising tool for fast and accurate prediction of coffee quality and for classifying green coffee beans into different specialty grades. However, the model should be further tested for coffee samples from different regions in Ethiopia and test if one generic or region-specific model should be developed. Copyright © 2015 Elsevier B.V. All rights reserved.

The steady-state flow quality in a model of a non-return wind tunnel

NASA Technical Reports Server (NTRS)

Mort, K. W.; Eckert, W. T.; Kelly, M. W.

1972-01-01

The structural cost of non-return wind tunnels is significantly less than that of the more conventional closed-circuit wind tunnels. However, because of the effects of external winds, the flow quality of non-return wind tunnels is an area of concern at the low test speeds required for V/STOL testing. The flow quality required at these low speeds is discussed and alternatives to the traditional manner of specifying the flow quality requirements in terms of dynamic pressure and angularity are suggested. The development of a non-return wind tunnel configuration which has good flow quality at low as well as at high test speeds is described.

The Cost of Quality Out-of-School-Time Programs

ERIC Educational Resources Information Center

Grossman, Jean Baldwin; Lind, Christianne; Hayes, Cheryl; McMaken, Jennifer; Gersick, Andrew

2009-01-01

Funders and program planners want to know: What does it cost to operate a high-quality after-school or summer program? This study answers that question, discovering that there is no "right" number. Cost varies substantially, depending on the characteristics of the participants, the goals of the program, who operates it and where it is located.…

The economic burden of diabetes in India: a review of the literature.

PubMed

Yesudian, Charles A K; Grepstad, Mari; Visintin, Erica; Ferrario, Alessandra

2014-12-02

Diabetes and its complications are a major cause of morbidity and mortality in India, and the prevalence of type 2 diabetes is on the rise. This calls for an assessment of the economic burden of the disease. To conduct a critical review of the literature on cost of illness studies of diabetes and its complications in India. A comprehensive literature review addressing the study objective was conducted. An extraction table and a scoring system to assess the quality of the studies reviewed were developed. A total of nineteen articles from different regions of India met the study inclusion criteria. The third party payer perspective was the most common study design (17 articles) while fewer articles (n =2) reported on costs from a health system or societal perspective. All the articles included direct costs and only a few (n =4) provided estimates for indirect costs based on income loss for patients and carers. Drug costs proved to be a significant cost component in several studies (n =12). While middle and high-income groups had higher expenditure in absolute terms, costs constituted a higher proportion of income for the poor. The economic burden was highest among urban groups. The overall quality of the studies is low due to a number of methodological weaknesses. The most frequent epidemiological approach employed was the prevalence-based one (n =18) while costs were mainly estimated using a bottom up approach (n =15). The body of literature on the costs of diabetes and its complications in India provides a fragmented picture that has mostly concentrated on the direct costs borne by individuals rather than the healthcare system. There is a need to develop a robust methodology to perform methodologically rigorous and transparent cost of illness studies to inform policy decisions.

Cervical cancer screening in Europe: Quality assurance and organisation of programmes.

PubMed

Elfström, K Miriam; Arnheim-Dahlström, Lisen; von Karsa, Lawrence; Dillner, Joakim

2015-05-01

Cervical screening programmes have reduced cervical cancer incidence and mortality but the level of success is highly variable between countries. Organisation of programmes is essential for equity and cost-effectiveness. However, there are differences in effectiveness, also among organised programmes. In order to identify the key organisational components that determine effectiveness, we performed a Europe-wide survey on the current status of organisation and organised quality assurance (QA) measures in cervical cancer prevention programmes, as well as organisation-associated costs. A comprehensive questionnaire was developed through systematic review of literature and existing guidelines. The survey was sent to programme organisers, Ministries of Health and experts in 34 European Union (EU) and European Free Trade Agreement (EFTA) countries. Detailed aspects of programme organisation, quality assurance, monitoring, evaluation and corresponding line-item costs were recorded. Documentation of programme guidelines, protocols and publications was requested. Twenty-nine of 34 countries responded. The results showed that organised efforts for QA, monitoring and evaluation were carried out to a differing extent and were not standardised, making it difficult to compare the cost-effectiveness of organisation and QA strategies. Most countries found it hard to estimate the costs associated with launching and operating the organised programme. To our knowledge, this is the first questionnaire to request detailed information on the actual organisation and QA of programmes. The results of this survey can be used as a basis for further development of standardised guidelines on organisation and QA of cervical cancer screening programmes in Europe. Copyright © 2015 Elsevier Ltd. All rights reserved.

Are ACOs ready to be accountable for medication use?

PubMed

Dubois, Robert W; Feldman, Marv; Lustig, Adam; Kotzbauer, Greg; Penso, Jerry; Pope, Scott D; Westrich, Kimberly D

2014-01-01

Accountable care organizations (ACOs) have the potential to lower costs and improve quality through incentives and coordinated care. However, the design brings with it many new challenges. One such challenge is the optimal use of pharmaceuticals. Most ACOs have not yet focused on this integral facet of care, even though medications are a critical component to achieving the lower costs and improved quality that are anticipated with this new model. To evaluate whether ACOs are prepared to maximize the value of medications for achieving quality benchmarks and cost offsets. During the fall of 2012, an electronic readiness self-assessment was developed using a portion of the questions and question methodology from the National Survey of Accountable Care Organizations, along with original questions developed by the authors. The assessment was tested and subsequently revised based on feedback from pilot testing with 5 ACO representatives. The revised assessment was distributed via e-mail to a convenience sample (n=175) of ACO members of the American Medical Group Association, Brookings-Dartmouth ACO Learning Network, and Premier Healthcare Alliance. The self-assessment was completed by 46 ACO representatives (26% response rate). ACOs reported high readiness to manage medications in a few areas, such as transmitting prescriptions electronically (70%), being able to integrate medical and pharmacy data into a single database (54%), and having a formulary in place that encourages generic use when appropriate (50%). However, many areas have substantial room for improvement with few ACOs reporting high readiness. Some notable areas include being able to quantify the cost offsets and hence demonstrate the value of appropriate medication use (7%), notifying a physician when a prescription has been filled (9%), having protocols in place to avoid medication duplication and polypharmacy (17%), and having quality metrics in place for a broad diversity of conditions (22%). Developing the capabilities to support, monitor, and ensure appropriate medication use will be critical to achieve optimal patient outcomes and ACO success. The ACOs surveyed have embarked upon an important journey towards this goal, but critical gaps remain before they can become fully accountable. While many of these organizations have begun adopting health information technologies that allow them to maximize the value of medications for achieving quality outcomes and cost offsets, a significant lag was identified in their inability to use these technologies to their full capacities. In order to provide further guidance, the authors have begun documenting case studies for public release that would provide ACOs with examples of how certain medication issues have been addressed by ACOs or relevant organizations. The authors hope that these case studies will help ACOs optimize the value of pharmaceuticals and achieve the "triple aim" of improving care, health, and cost.

Children's Mental Health: Strategies for Providing High Quality and Cost-Effective Care. North Carolina Family Impact Seminar

ERIC Educational Resources Information Center

Douglass, Nam, Ed.; Owen, Jenni, Ed.; Berlin, Lisa J., Ed.

2006-01-01

This report represents the second North Carolina Family Impact Seminar in a series designed to connect research and state policymaking. Family Impact Seminars analyze the impact an issue, policy, or program may have on families. This Family Impact Seminar briefing report discusses strategies for providing high quality and cost-effective children's…

Institute for Business, Industry and Government: Serving Training Needs Locally.

ERIC Educational Resources Information Center

Gramm, Linda A.

The Institute for Business, Industry and Government was established at Orange County Community College (New York) in April 1984 for the purpose of providing high quality, cost-effective training taught by qualified professionals at convenient locations and to develop methods of measuring training effectiveness. Since its first year of offering…

A Framework for Open Textbooks Analytics System

ERIC Educational Resources Information Center

Prasad, Deepak; Totaram, Rajneel; Usagawa, Tsuyoshi

2016-01-01

In the last few years, open textbook development has picked up dramatically due both to the expense of commercially published textbooks and the increasing availability of high-quality OER alternatives. While this offers a tremendous benefit in terms of lowering student textbook costs, the question remains, to what extent (if any) do open textbooks…

Creating Tech Programs Industry Wants

ERIC Educational Resources Information Center

Demski, Jennifer

2012-01-01

Community colleges serve on the front line of workforce development. With their focus on applied science associate degrees and technical certificate programs, they provide students with a high-quality, low-cost education that prepares them for careers in one to two years. And for students who can't take time away from their family or work to…

Quality Function Deployment for Large Systems

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1992-01-01

Quality Function Deployment (QFD) is typically applied to small subsystems. This paper describes efforts to extend QFD to large scale systems. It links QFD to the system engineering process, the concurrent engineering process, the robust design process, and the costing process. The effect is to generate a tightly linked project management process of high dimensionality which flushes out issues early to provide a high quality, low cost, and, hence, competitive product. A pre-QFD matrix linking customers to customer desires is described.

The cost-effectiveness of supported employment for adults with autism in the United Kingdom

PubMed Central

Megnin-Viggars, Odette; Cheema, Nadir; Howlin, Patricia; Baron-Cohen, Simon; Pilling, Stephen

2014-01-01

Adults with autism face high rates of unemployment. Supported employment enables individuals with autism to secure and maintain a paid job in a regular work environment. The objective of this study was to assess the cost-effectiveness of supported employment compared with standard care (day services) for adults with autism in the United Kingdom. Thus, a decision-analytic economic model was developed, which used outcome data from the only trial that has evaluated supported employment for adults with autism in the United Kingdom. The main analysis considered intervention costs, while cost-savings associated with changes in accommodation status and National Health Service and personal social service resource use were examined in secondary analyses. Two outcome measures were used: the number of weeks in employment and the quality-adjusted life year. Supported employment resulted in better outcomes compared with standard care, at an extra cost of £18 per additional week in employment or £5600 per quality-adjusted life year. In secondary analyses that incorporated potential cost-savings, supported employment dominated standard care (i.e. it produced better outcomes at a lower total cost). The analysis suggests that supported employment schemes for adults with autism in the United Kingdom are cost-effective compared with standard care. Further research needs to confirm these findings. PMID:24126866

Cells as advanced therapeutics: State-of-the-art, challenges, and opportunities in large scale biomanufacturing of high-quality cells for adoptive immunotherapies.

PubMed

Dwarshuis, Nate J; Parratt, Kirsten; Santiago-Miranda, Adriana; Roy, Krishnendu

2017-05-15

Therapeutic cells hold tremendous promise in treating currently incurable, chronic diseases since they perform multiple, integrated, complex functions in vivo compared to traditional small-molecule drugs or biologics. However, they also pose significant challenges as therapeutic products because (a) their complex mechanisms of actions are difficult to understand and (b) low-cost bioprocesses for large-scale, reproducible manufacturing of cells have yet to be developed. Immunotherapies using T cells and dendritic cells (DCs) have already shown great promise in treating several types of cancers, and human mesenchymal stromal cells (hMSCs) are now extensively being evaluated in clinical trials as immune-modulatory cells. Despite these exciting developments, the full potential of cell-based therapeutics cannot be realized unless new engineering technologies enable cost-effective, consistent manufacturing of high-quality therapeutic cells at large-scale. Here we review cell-based immunotherapy concepts focused on the state-of-the-art in manufacturing processes including cell sourcing, isolation, expansion, modification, quality control (QC), and culture media requirements. We also offer insights into how current technologies could be significantly improved and augmented by new technologies, and how disciplines must converge to meet the long-term needs for large-scale production of cell-based immunotherapies. Copyright © 2017 Elsevier B.V. All rights reserved.

Technology Cost and Schedule Estimation (TCASE) Final Report

NASA Technical Reports Server (NTRS)

Wallace, Jon; Schaffer, Mark

2015-01-01

During the 2014-2015 project year, the focus of the TCASE project has shifted from collection of historical data from many sources to securing a data pipeline between TCASE and NASA's widely used TechPort system. TCASE v1.0 implements a data import solution that was achievable within the project scope, while still providing the basis for a long-term ability to keep TCASE in sync with TechPort. Conclusion: TCASE data quantity is adequate and the established data pipeline will enable future growth. Data quality is now highly dependent the quality of data in TechPort. Recommendation: Technology development organizations within NASA should continue to work closely with project/program data tracking and archiving efforts (e.g. TechPort) to ensure that the right data is being captured at the appropriate quality level. TCASE would greatly benefit, for example, if project cost/budget information was included in TechPort in the future.

Creating value-focused healthcare delivery systems: Part three--Core competencies.

PubMed

Beveridge, R N

1997-01-01

Value is created through the delivery of high-quality, cost--effective healthcare services. The ability to create value from the providers' perspective is facilitated through the development and implementation of essential, customer-focused core competencies. These core competencies include customer relationship management, payer/provider relationship management, disease management, outcomes management, financial/cost management, and information management. Customer relationship management is the foundation upon which all core competencies must be built. All of the core competencies must focus on the needs of the customers, both internal and external. Structuring all processes involved in the core competencies from the perspective of the customer will ensure that value is created throughout the system. Payer/provider relationship management will become a crucial pillar for healthcare providers in the future. As more vertical integration among providers occurs, the management of the relationships among providers and with payers will become more important. Many of the integration strategies being implemented across the country involve the integration of hospitals, physicians, and payers to form accountable health plans. The relationships must be organized to form "win/win" situations, where all parties are focused on a shared vision of creating value and none of the parties benefits at the expense of the others. Disease management in creating value requires that we begin examining the disease process along the entire continuum. Not only must providers be able to provide high-quality acute and chronic care, but they must also begin to focus more heavily on programs of prevention. Value is created throughout the system through reducing the prevalence and incidence of disease. Only through managing the full continuum of health will value be created throughout the healthcare delivery system. Outcomes management ensures that the outcomes are the highest quality at a cost-effective price. Outcomes must not only be compared to best practices, but to what is possible. Providers must constantly strive to enhance the quality of the services. Financial/cost management ensures that care is cost-effective and that a marginal profit is maintained to allow continued investment in new technology and continuing medical education to enhance the quality of care and lifestyles for all stakeholders. Information management is the binding element, or keystone, in providing value-focused care. Through the collection, storing, transfer, manipulation, sorting, and reporting of data, more effective decision-making can occur. Integrated MIS allows information to be generated about the cost-effectiveness of treatment regimens, employee productivity, physician cost-effectiveness, supply utilization, and clinical outcomes, as well as patient information to be readily available throughout the healthcare system. Having this information available will allow providers to become more cost-effective in the delivery of care, which results in perceived higher value for the services. Customers demand value. Value is created by meeting the needs and demands of the customers through the delivery of cost-effective, high-quality healthcare services that are easily accessible and meet with high patient satisfaction. Providers who can demonstrate their ability to provide the services in this manner will create a competitive advantage in the marketplace and will be perceived as the value provider of choice by loyal customers.

A high-throughput Sanger strategy for human mitochondrial genome sequencing

PubMed Central

2013-01-01

Background A population reference database of complete human mitochondrial genome (mtGenome) sequences is needed to enable the use of mitochondrial DNA (mtDNA) coding region data in forensic casework applications. However, the development of entire mtGenome haplotypes to forensic data quality standards is difficult and laborious. A Sanger-based amplification and sequencing strategy that is designed for automated processing, yet routinely produces high quality sequences, is needed to facilitate high-volume production of these mtGenome data sets. Results We developed a robust 8-amplicon Sanger sequencing strategy that regularly produces complete, forensic-quality mtGenome haplotypes in the first pass of data generation. The protocol works equally well on samples representing diverse mtDNA haplogroups and DNA input quantities ranging from 50 pg to 1 ng, and can be applied to specimens of varying DNA quality. The complete workflow was specifically designed for implementation on robotic instrumentation, which increases throughput and reduces both the opportunities for error inherent to manual processing and the cost of generating full mtGenome sequences. Conclusions The described strategy will assist efforts to generate complete mtGenome haplotypes which meet the highest data quality expectations for forensic genetic and other applications. Additionally, high-quality data produced using this protocol can be used to assess mtDNA data developed using newer technologies and chemistries. Further, the amplification strategy can be used to enrich for mtDNA as a first step in sample preparation for targeted next-generation sequencing. PMID:24341507

Printable thermoelectric devices and conductive patterns for medical applications

NASA Astrophysics Data System (ADS)

Lee, Jungmin; Kim, Hyunjung; Chen, Linfeng; Choi, Sang H.; Varadan, Vijay K.

2012-10-01

Remote point-of-care is expected to revolutionize the modern medical practice, and many efforts have been made for the development of wireless health monitoring systems for continuously detecting the physiological signals of patients. To make the remote point-of-care generally accepted and widely used, it is necessary to develop cost-effective and durable wireless health monitoring systems. Printing technique will be helpful for the fabrication of high-quality and low-cost medical devices and systems because it allows high-resolution and high-speed fabrication, low material consumption and nano-sized patterning on both flexible and rigid substrates. Furthermore, application of thermoelectric generators can replace conventional batteries as the power sources for wireless health monitoring systems because thermoelectric generators can convert the wasted heat or the heat from nature into electricity which is required for the operation of the wireless health monitoring systems. In this research, we propose the concept of printable thermoelectric devices and conductive patterns for the realization of more portable and cost-effective medical devices. To print thermoelectric generators and conductive patterns on substrates, printing inks with special characteristics should be developed. For the development of thermoelectric inks, nano-structured thermoelectric materials are synthesized and characterized; and for the development of conductive inks, two kinds of surface treated carbon nanotubes are used as active materials.

Mechanical Thrombectomy in Patients With Acute Ischemic Stroke: A Health Technology Assessment

PubMed Central

2016-01-01

Background In Ontario, current treatment for eligible patients who have an acute ischemic stroke is intravenous thrombolysis (IVT). However, there are some limitations and contraindications to IVT, and outcomes may not be favourable for patients with stroke caused by a proximal intracranial occlusion. An alternative is mechanical thrombectomy with newer devices, and a number of recent studies have suggested that this treatment is more effective for improving functional independence and clinical outcomes. The objective of this health technology assessment was to evaluate the clinical effectiveness and cost-effectiveness of new-generation mechanical thrombectomy devices (with or without IVT) compared to IVT alone (if eligible) in patients with acute ischemic stroke. Methods We conducted a systematic review of the literature, limited to randomized controlled trials that examined the effectiveness of mechanical thrombectomy using stent retrievers and thromboaspiration devices for patients with acute ischemic stroke. We assessed the quality of the evidence using the GRADE approach. We developed a Markov decision-analytic model to assess the cost-effectiveness of mechanical thrombectomy (with or without IVT) versus IVT alone (if eligible), calculated incremental cost-effectiveness ratios using a 5-year time horizon, and conducted sensitivity analyses to examine the robustness of the estimates. Results There was a substantial, statistically significant difference in rate of functional independence (GRADE: high quality) between those who received mechanical thrombectomy (with or without IVT) and IVT alone (odds ratio [OR] 2.39, 95% confidence interval [CI] 1.88–3.04). We did not observe a difference in mortality (GRADE: moderate quality) (OR 0.80, 95% CI 0.60–1.07) or symptomatic intracerebral hemorrhage (GRADE: moderate quality) (OR 1.11, 95% CI 0.66–1.87). In the base-case cost-utility analysis, which had a 5 year time horizon, the costs and effectiveness for mechanical thrombectomy were $126,939 and 1.484 quality-adjusted life-years (QALYs) (2.969 life-years). The costs and effectiveness for IVT alone were $124,419 and 1.273 QALYs (2.861 life-years), respectively. Mechanical thrombectomy was associated with an incremental cost-effectiveness ratio of $11,990 per QALY gained. Probabilistic sensitivity analysis showed that the probability of mechanical thrombectomy being cost-effective was 57.5%, 89.7%, and 99.6%, at thresholds of $20,000, $50,000, and $100,000 per QALY gained, respectively. We estimated that adopting mechanical thrombectomy would lead to a cost increase of approximately $1 to 2 million. Conclusions High quality evidence showed that mechanical thrombectomy significantly improved functional independence and appeared to be cost-effective compared to IVT alone for patients with acute ischemic stroke. PMID:27026799

Space Optic Manufacturing - X-ray Mirror

NASA Technical Reports Server (NTRS)

1998-01-01

NASA's Space Optics Manufacturing Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies for the NASA program in the 21st century - including the long-term goal of imaging Earth-like planets in distant solar systems. To reduce the cost of mirror fabrication, Marshall Space Flight Center (MSFC) has developed replication techniques, the machinery and materials to replicate electro-formed nickel mirrors. The process allows fabricating precisely shaped mandrels to be used and reused as masters for replicating high-quality mirrors. This image shows a lightweight replicated x-ray mirror with gold coatings applied.

Space Science

NASA Image and Video Library

1998-08-31

NASA's Space Optics Manufacturing Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies for the NASA program in the 21st century - including the long-term goal of imaging Earth-like planets in distant solar systems. To reduce the cost of mirror fabrication, Marshall Space Flight Center (MSFC) has developed replication techniques, the machinery and materials to replicate electro-formed nickel mirrors. The process allows fabricating precisely shaped mandrels to be used and reused as masters for replicating high-quality mirrors. This image shows a lightweight replicated x-ray mirror with gold coatings applied.

Space Science

NASA Image and Video Library

1999-04-01

NASA's Space Optics Manufacturing Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies to the NASA program in the 21st century - including the long-term goal of imaging Earth-like planets in distant solar systems. To reduce the cost of mirror fabrication, Marshall Space Flight Center (MSFC) has developed replication techniques, the machinery, and materials to replicate electro-formed nickel mirrors. The process allows fabricating precisely shaped mandrels to be used and reused as masters for replicating high-quality mirrors. Photograph shows J.R. Griffith inspecting a replicated x-ray mirror mandrel.

Creating a Methodology for Coordinating High-resolution Air Quality Improvement Map and Greenhouse Gas Mitigation Strategies in Pittsburgh City

NASA Astrophysics Data System (ADS)

Shi, J.; Donahue, N. M.; Klima, K.; Blackhurst, M.

2016-12-01

In order to tradeoff global impacts of greenhouse gases with highly local impacts of conventional air pollution, researchers require a method to compare global and regional impacts. Unfortunately, we are not aware of a method that allows these to be compared, "apples-to-apples". In this research we propose a three-step model to compare possible city-wide actions to reduce greenhouse gases and conventional air pollutants. We focus on Pittsburgh, PA, a city with consistently poor air quality that is interested in reducing both greenhouse gases and conventional air pollutants. First, we use the 2013 Pittsburgh Greenhouse Gas Inventory to update the Blackhurst et al. model and conduct a greenhouse gas abatement potentials and implementation costs of proposed greenhouse gas reduction efforts. Second, we use field tests for PM2.5, NOx, SOx, organic carbon (OC) and elemental carbon (EC) data to inform a Land-use Regression Model for local air pollution at a 100m x 100m spatial level, which combined with a social cost of air pollution model (EASIUR) allows us to calculate economic social damages. Third, we combine these two models into a three-dimensional greenhouse gas cost abatement curve to understand the implementation costs and social benefits in terms of air quality improvement and greenhouse gas abatement for each potential intervention. We anticipated such results could provide policy-maker insights in green city development.

Reducing healthcare costs facilitated by surgical auditing: a systematic review.

PubMed

Govaert, Johannes Arthuur; van Bommel, Anne Charlotte Madeline; van Dijk, Wouter Antonie; van Leersum, Nicoline Johanneke; Tollenaar, Robertus Alexandre Eduard Mattheus; Wouters, Michael Wilhemus Jacobus Maria

2015-07-01

Surgical auditing has been developed in order to benchmark and to facilitate quality improvement. The aim of this review is to determine if auditing combined with systematic feedback of information on process and outcomes of care results in lower costs of surgical care. A systematic search of published literature before 21-08-2013 was conducted in Pubmed, Embase, Web of Science, and Cochrane Library. Articles were selected if they met the inclusion criteria of describing a surgical audit with cost-evaluation. The systematic search resulted in 3608 papers. Six studies were identified as relevant, all showing a positive effect of surgical auditing on quality of healthcare and therefore cost savings was reported. Cost reductions ranging from $16 to $356 per patient were seen in audits evaluating general or vascular procedures. The highest potential cost reduction was described in a colorectal surgical audit (up to $1,986 per patient). All six identified articles in this review describe a reduction in complications and thereby a reduction in costs due to surgical auditing. Surgical auditing may be of greater value when high-risk procedures are evaluated, since prevention of adverse events in these procedures might be of greater clinical and therefore of greater financial impact. This systematic review shows that surgical auditing can function as a quality instrument and therefore as a tool to reduce costs. Since evidence is scarce so far, further studies should be performed to investigate if surgical auditing has positive effects to turn the rising healthcare costs around. In the future, incorporating (actual) cost analyses and patient-related outcome measures would increase the audits' value and provide a complete overview of the value of healthcare.

Early prevention of pressure ulcers among elderly patients admitted through emergency departments: a cost-effectiveness analysis.

PubMed

Pham, Ba'; Teague, Laura; Mahoney, James; Goodman, Laurie; Paulden, Mike; Poss, Jeff; Li, Jianli; Ieraci, Luciano; Carcone, Steven; Krahn, Murray

2011-11-01

Every year, approximately 6.2 million hospital admissions through emergency departments (ED) involve elderly patients who are at risk of developing pressure ulcers. We evaluated the cost-effectiveness of pressure-redistribution foam mattresses on ED stretchers and beds for early prevention of pressure ulcers in elderly admitted ED patients. Using a Markov model, we evaluated the incremental effectiveness (quality-adjusted life-days) and incremental cost (hospital and home care costs) between early prevention and current practice (with standard hospital mattresses) from a health care payer perspective during a 1-year time horizon. The projected incidence of ED-acquired pressure ulcers was 1.90% with current practice and 1.48% with early prevention, corresponding to a number needed to treat of 238 patients. The average upgrading cost from standard to pressure-redistribution mattresses was $0.30 per patient. Compared with current practice, early prevention was more effective, with 0.0015 quality-adjusted life-days gained, and less costly, with a mean cost saving of $32 per patient. If decisionmakers are willing to pay $50,000 per quality-adjusted life-year gained, early prevention was cost-effective even for short ED stay (ie, 1 hour), low hospital-acquired pressure ulcer risk (1% prevalence), and high unit price of pressure-redistribution mattresses ($3,775). Taking input uncertainty into account, early prevention was 81% likely to be cost-effective. Expected value-of-information estimates supported additional randomized controlled trials of pressure-redistribution mattresses to eliminate the remaining decision uncertainty. The economic evidence supports early prevention with pressure-redistribution foam mattresses in the ED. Early prevention is likely to improve health for elderly patients and save hospital costs. Copyright © 2011 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

Battling Costs for Quality and Quantity: Emerging Responses in Early Childhood Care and Education. Notes, Comments...(Child, Family, Community). Digest No. II.

ERIC Educational Resources Information Center

Prakasha, Veda

This digest explores the possibilities of cost reduction in extending the coverage and upgrading the quality of preschool education especially in developing countries. The digest also seeks to highlight the importance of community participation in developing and managing preschool institutions and programs. Chapters cover the following topics: the…

Air-Microfluidics: Creating Small, Low-cost, Portable Air Quality Sensors

EPA Science Inventory

Air-microfluidics shows great promise in dramatically reducing the size, cost, and power requirements of future air quality sensors without compromising their accuracy. Microfabrication provides a suite of relatively new tools for the development of micro electro mechanical syste...

Comparison of cost accounting methods from different DRG systems and their effect on health care quality.

PubMed

Leister, Jan Eric; Stausberg, Jürgen

2005-09-28

Diagnosis related groups (DRGs) are a well-established provider payment system. Because of their imminent potential of cost reduction, they have been widely introduced. In addition to cost cutting, several social objectives - e.g., improving overall health care quality - feed into the DRG system. The WHO compared different provider payment systems with regard to the following objectives: prevention of further health problems, providing services and solving health problems, and responsiveness to people's legitimate expectations. However, no study has been published which takes the impact of different cost accounting systems across the DRG systems into account. We compared the impact of different cost accounting methods within DRG-like systems by developing six criteria: integration of patients' health risk into pricing practice, incentives for quality improvement and innovation, availability of high class evidence based therapy, prohibition of economically founded exclusions, reduction of fragmentation incentives, and improvement of patient oriented treatment. We set up a first overview of potential and actual impacts of the pricing practices within Yale-DRGs, AR-DRGs, G-DRGs, Swiss AP-DRGs adoption and Swiss MIPP. It could be demonstrated that DRGs are not only a 'homogenous' group of similar provider payment systems but quite different by fulfilling major health care objectives connected with the used cost accounting methods. If not only the possible cost reduction is used to put in a good word for DRG-based provider payment systems, maximum accurateness concerning the method of cost accounting should prevail when implementing a new DRG-based provider payment system.

The long-term health, social, and financial burden of hypoxic-ischaemic encephalopathy.

PubMed

Eunson, Paul

2015-04-01

Infants who suffer hypoxic-ischaemic encephalopathy (HIE) at term are at risk of dying or developing severe cerebral palsy (CP). Children with severe CP often have other neurodevelopmental disabilities, which may affect their quality of life as much as the CP itself. New treatments for HIE, such as cooling, may improve motor outcomes, but affected infants may still have significant cognitive or communication problems. Infants who have experienced HIE and develop CP will require significant medical input throughout childhood and adult life. The costs of this medical input are high, but the indirect costs to the child, his or her family, and the relevant social services and education systems are many times greater. When demonstrating the cost-effectiveness of interventions aimed at preventing or treating HIE, these additional costs should be taken into account. © The Authors. Journal compilation © 2015 Mac Keith Press.

PTERA - Modular Aircraft Flight Test

NASA Image and Video Library

2016-01-13

Aerospace testing can be costly and time consuming but a new modular, subscale remotely piloted aircraft offers NASA researchers more affordable options for developing a wide range of cutting edge aviation and space technologies. The Prototype-Technology Evaluation and Research Aircraft (PTERA), developed by Area-I, Inc., of Kennesaw, Georgia, is an extremely versatile and high quality, yet inexpensive, flying laboratory bridging the gap between wind tunnels and crewed flight testing.

The Impact of Oregon's Pension Legacy Costs on New Teacher Turnover and Quality. CEDR Working Paper. WP #2016-5

ERIC Educational Resources Information Center

Cahill, Kevin E.; Dyke, Andrew; Tapogna, John

2016-01-01

Pension legacy costs can restrict the amount of resources available for current public education, potentially making it more difficult to attract and retain high-quality teachers. Oregon provides a useful case study in pension legacy costs because many school districts in the state are now reallocating General Fund expenditures to cover sizeable…

A Quality-Based Payment Strategy for Nursing Home Care in Minnesota

ERIC Educational Resources Information Center

Kane, Robert L.; Arling, Greg; Mueller, Christine; Held, Robert; Cooke, Valerie

2007-01-01

This article describes a pay-for-performance system developed for Minnesota nursing homes. In effect, nursing homes can retain a greater proportion of the difference between their costs and the average costs on the basis of their quality scores. The quality score is a derived and weighted composite measure currently composed of five elements:…

The SULSA Assay Development Fund: accelerating translation of new biology from academia to pharma.

PubMed

McElroy, Stuart P; Jones, Philip S; Barrault, Denise V

2017-02-01

With industry increasingly sourcing preclinical drug discovery projects from academia it is important that new academic discoveries are enabled through translation with HTS-ready assays. However, many scientifically interesting, novel molecular targets lack associated high-quality, robust assays suitable for hit finding and development. To bridge this gap, the Scottish Universities Life Sciences Alliance (SULSA) established a fund to develop assays to meet quality criteria such as those of the European Lead Factory. A diverse project portfolio was quickly assembled, and a review of the learnings and successful outcomes showed this fund as a new highly cost-effective model for leveraging significant follow-on resources, training early-career scientists and establishing a culture of translational drug discovery in the academic community. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Applications of cost-effectiveness methodologies in behavioral medicine.

PubMed

Kaplan, Robert M; Groessl, Erik J

2002-06-01

In 1996, the Panel on Cost-Effectiveness in Health and Medicine developed standards for cost-effectiveness analysis. The standards include the use of a societal perspective, that treatments be evaluated in comparison with the best available alternative (rather than with no care at all), and that health benefits be expressed in standardized units. Guidelines for cost accounting were also offered. Among 24,562 references on cost-effectiveness in Medline between 1995 and 2000, only a handful were relevant to behavioral medicine. Only 19 studies published between 1983 and 2000 met criteria for further evaluation. Among analyses that were reported, only 2 studies were found consistent with the Panel's criteria for high-quality analyses, although more recent studies were more likely to meet methodological standards. There are substantial opportunities to advance behavioral medicine by performing standardized cost-effectiveness analyses.

Centers for medicare and medicaid services: using an episode-based payment model to improve oncology care.

PubMed

Kline, Ronald M; Bazell, Carol; Smith, Erin; Schumacher, Heidi; Rajkumar, Rahul; Conway, Patrick H

2015-03-01

Cancer is a medically complex and expensive disease with costs projected to rise further as new treatment options increase and the United States population ages. Studies showing significant regional variation in oncology quality and costs and model tests demonstrating cost savings without adverse outcomes suggest there are opportunities to create a system of oncology care in the US that delivers higher quality care at lower cost. The Centers for Medicare and Medicaid Services (CMS) have designed an episode-based payment model centered around 6 month periods of chemotherapy treatment. Monthly per-patient care management payments will be made to practices to support practice transformation, including additional patient services and specific infrastructure enhancements. Quarterly reporting of quality metrics will drive continuous quality improvement and the adoption of best practices among participants. Practices achieving cost savings will also be eligible for performance-based payments. Savings are expected through improved care coordination and appropriately aligned payment incentives, resulting in decreased avoidable emergency department visits and hospitalizations and more efficient and evidence-based use of imaging, laboratory tests, and therapeutic agents, as well as improved end of life care. New therapies and better supportive care have significantly improved cancer survival in recent decades. This has come at a high cost, with cancer therapy consuming $124 billion in 2010. CMS has designed an episode-based model of oncology care that incorporates elements from several successful model tests. By providing care management and performance based payments in conjunction with quality metrics and a rapid learning environment, it is hoped that this model will demonstrate how oncology care in the US can transform into a high value, high quality system. Copyright © 2015 by American Society of Clinical Oncology.

Integrating automated support for a software management cycle into the TAME system

NASA Technical Reports Server (NTRS)

Sunazuka, Toshihiko; Basili, Victor R.

1989-01-01

Software managers are interested in the quantitative management of software quality, cost and progress. An integrated software management methodology, which can be applied throughout the software life cycle for any number purposes, is required. The TAME (Tailoring A Measurement Environment) methodology is based on the improvement paradigm and the goal/question/metric (GQM) paradigm. This methodology helps generate a software engineering process and measurement environment based on the project characteristics. The SQMAR (software quality measurement and assurance technology) is a software quality metric system and methodology applied to the development processes. It is based on the feed forward control principle. Quality target setting is carried out before the plan-do-check-action activities are performed. These methodologies are integrated to realize goal oriented measurement, process control and visual management. A metric setting procedure based on the GQM paradigm, a management system called the software management cycle (SMC), and its application to a case study based on NASA/SEL data are discussed. The expected effects of SMC are quality improvement, managerial cost reduction, accumulation and reuse of experience, and a highly visual management reporting system.

Comparative Cost-Effectiveness of Conservative or Intensive Blood Pressure Treatment Guidelines in Adults Aged 35-74 Years: The Cardiovascular Disease Policy Model.

PubMed

Moise, Nathalie; Huang, Chen; Rodgers, Anthony; Kohli-Lynch, Ciaran N; Tzong, Keane Y; Coxson, Pamela G; Bibbins-Domingo, Kirsten; Goldman, Lee; Moran, Andrew E

2016-07-01

The population health effect and cost-effectiveness of implementing intensive blood pressure goals in high-cardiovascular disease (CVD) risk adults have not been described. Using the CVD Policy Model, CVD events, treatment costs, quality-adjusted life years, and drug and monitoring costs were simulated over 2016 to 2026 for hypertensive patients aged 35 to 74 years. We projected the effectiveness and costs of hypertension treatment according to the 2003 Joint National Committee (JNC)-7 or 2014 JNC8 guidelines, and then for adults aged ≥50 years, we assessed the cost-effectiveness of adding an intensive goal of systolic blood pressure <120 mm Hg for patients with CVD, chronic kidney disease, or 10-year CVD risk ≥15%. Incremental cost-effectiveness ratios <$50 000 per quality-adjusted life years gained were considered cost-effective. JNC7 strategies treat more patients and are more costly to implement compared with JNC8 strategies. Adding intensive systolic blood pressure goals for high-risk patients prevents an estimated 43 000 and 35 000 annual CVD events incremental to JNC8 and JNC7, respectively. Intensive strategies save costs in men and are cost-effective in women compared with JNC8 alone. At a willingness-to-pay threshold of $50 000 per quality-adjusted life years gained, JNC8+intensive had the highest probability of cost-effectiveness in women (82%) and JNC7+intensive the highest probability of cost-effectiveness in men (100%). Assuming higher drug and monitoring costs, adding intensive goals for high-risk patients remained consistently cost-effective in men, but not always in women. Among patients aged 35 to 74 years, adding intensive blood pressure goals for high-risk groups to current national hypertension treatment guidelines prevents additional CVD deaths while saving costs provided that medication costs are controlled. © 2016 American Heart Association, Inc.

Cost-Effectiveness of Transcatheter Aortic Valve Replacement With a Self-Expanding Prosthesis Versus Surgical Aortic Valve Replacement.

PubMed

Reynolds, Matthew R; Lei, Yang; Wang, Kaijun; Chinnakondepalli, Khaja; Vilain, Katherine A; Magnuson, Elizabeth A; Galper, Benjamin Z; Meduri, Christopher U; Arnold, Suzanne V; Baron, Suzanne J; Reardon, Michael J; Adams, David H; Popma, Jeffrey J; Cohen, David J

2016-01-05

Previous studies of the cost-effectiveness of transcatheter aortic valve replacement (TAVR) have been based primarily on a single balloon-expandable system. The goal of this study was to evaluate the cost-effectiveness of TAVR with a self-expanding prosthesis compared with surgical aortic valve replacement (SAVR) for patients with severe aortic stenosis and high surgical risk. We performed a formal economic analysis on the basis of individual, patient-level data from the CoreValve U.S. High Risk Pivotal Trial. Empirical data regarding survival and quality of life over 2 years, and medical resource use and hospital costs through 12 months were used to project life expectancy, quality-adjusted life expectancy, and lifetime medical costs in order to estimate the incremental cost-effectiveness of TAVR versus SAVR from a U.S. Relative to SAVR, TAVR reduced initial length of stay an average of 4.4 days, decreased the need for rehabilitation services at discharge, and resulted in superior 1-month quality of life. Index admission and projected lifetime costs were higher with TAVR than with SAVR (differences $11,260 and $17,849 per patient, respectively), whereas TAVR was projected to provide a lifetime gain of 0.32 quality-adjusted life-years ([QALY]; 0.41 LY) with 3% discounting. Lifetime incremental cost-effectiveness ratios were $55,090 per QALY gained and $43,114 per LY gained. Sensitivity analyses indicated that a reduction in the initial cost of TAVR by ∼$1,650 would lead to an incremental cost-effectiveness ratio <$50,000/QALY gained. In a high-risk clinical trial population, TAVR with a self-expanding prosthesis provided meaningful clinical benefits compared with SAVR, with incremental costs considered acceptable by current U.S. With expected modest reductions in the cost of index TAVR admissions, the value of TAVR compared with SAVR in this patient population would become high. (Safety and Efficacy Study of the Medtronic CoreValve System in the Treatment of Symptomatic Severe Aortic Stenosis in High Risk and Very High Risk Subjects Who Need Aortic Valve Replacement [Medtronic CoreValve U.S. Pivotal Trial]; NCT01240902). Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Strategies to avoid the loss of developmental potential in more than 200 million children in the developing world.

PubMed

Engle, Patrice L; Black, Maureen M; Behrman, Jere R; Cabral de Mello, Meena; Gertler, Paul J; Kapiriri, Lydia; Martorell, Reynaldo; Young, Mary Eming

2007-01-20

This paper is the third in the Child Development Series. The first paper showed that more than 200 million children under 5 years of age in developing countries do not reach their developmental potential. The second paper identified four well-documented risks: stunting, iodine deficiency, iron deficiency anaemia, and inadequate cognitive stimulation, plus four potential risks based on epidemiological evidence: maternal depression, violence exposure, environmental contamination, and malaria. This paper assesses strategies to promote child development and to prevent or ameliorate the loss of developmental potential. The most effective early child development programmes provide direct learning experiences to children and families, are targeted toward younger and disadvantaged children, are of longer duration, high quality, and high intensity, and are integrated with family support, health, nutrition, or educational systems and services. Despite convincing evidence, programme coverage is low. To achieve the Millennium Development Goals of reducing poverty and ensuring primary school completion for both girls and boys, governments and civil society should consider expanding high quality, cost-effective early child development programmes.

Designing "Real-World" trials to meet the needs of health policy makers at marketing authorization.

PubMed

Calvert, Melanie; Wood, John; Freemantle, Nick

2011-07-01

There is increasing interest in conducting "Real-World" trials that go beyond traditional assessment of efficacy and safety to examine market access and value for money questions before marketing authorization of a new pharmaceutical product or health technology. This commentary uses practical examples to demonstrate how high-quality evidence of the cost-effectiveness of an intervention may be gained earlier in the development process. Issues surrounding the design and analysis of "Real-World" trials to demonstrate relative cost-effectiveness early in the life of new technologies are discussed. The modification of traditional phase III trial designs, de novo trial designs, the combination of trial-based and epidemiological data, and the use of simulation model-based approaches to address reimbursement questions are described. Modest changes to a phase III trial protocol and case report form may be undertaken at the design stage to provide valid estimates of health care use and the benefits accrued; however, phase III designs often preclude "real-life" practice. Relatively small de novo trials may be used to address adherence to therapy or patient preference, although simply designed studies with active comparators enrolling large numbers of patients may provide evidence on long-term safety and rare adverse events. Practical examples demonstrate that it is possible to provide high-quality evidence of the cost-effectiveness of an intervention earlier in the development process. Payers and decision makers should preferentially adopt treatments with such evidence than treatments for which evidence is lacking or of lower quality. Copyright © 2011 Elsevier Inc. All rights reserved.

Physician clinical alignment and integration: a community-academic hospital approach.

PubMed

Salas-Lopez, Debbie; Weiss, Sandra Jarva; Nester, Brian; Whalen, Thomas

2014-01-01

An overwhelming need for change in the U.S. healthcare delivery system, coupled with the need to improve clinical and financial outcomes, has prompted hospitals to direct renewed efforts toward achieving high quality and cost-effectiveness. Additionally, with the dawn of accountable care organizations and increasing focus on patient expectations, hospitals have begun to seek physician partners through clinical alignment. Contrary to the unsuccessful alignment strategies of the 1990s, today's efforts are more mutually beneficial, driven by the need to achieve better care coordination, increased access to infrastructure, improved quality, and lower costs. In this article, we describe a large, academic, tertiary care hospital's approach to developing and implementing alignment and integration models with its collaboration-ready physicians and physician groups. We developed four models--short of physicians' employment with the organization--tailored to meet the needs of both the physician group and the hospital: (1) medical directorship (group physicians are appointed to serve as medical directors of a clinical area), (2) professional services agreement (specific clinical services, such as overnight admissions help, are contracted), (3) co-management services agreement (one specialty group co-manages all services within the specialty service lines), and (4) lease arrangement (closest in scope to employment, in which the hospital pays all expenses and receives all revenue). Successful hospital-physician alignment requires careful planning and the early engagement of legal counsel to ensure compliance with federal statutes. Establishing an integrated system with mutually identified goals better positions hospitals to deliver cost-effective and high-quality care under the new paradigm of healthcare reform.

Application of NIR hyperspectral imaging for post-consumer polyolefins recycling

NASA Astrophysics Data System (ADS)

Serranti, Silvia; Gargiulo, Aldo; Bonifazi, Giuseppe

2012-06-01

An efficient large-scale recycling approach of particulate solid wastes is always accomplished according to the quality of the materials fed to the recycling plant and/or to any possible continuous and reliable control of the different streams inside the processing plants. Processing technologies addressed to recover plastics need to be extremely powerful, since they must be relatively simple to be cost-effective, but also accurate enough to create high-purity products and able to valorize a substantial fraction of the plastic waste materials into useful products of consistent quality in order to be economical. On the other hand, the potential market for such technologies is large and the boost of environmental regulations, and the oil price increase, has made many industries interested both in "general purpose" waste sorting technologies, as well as in developing more specialized sensing devices and/or inspection logics for a better quality assessment of plastic products. In this perspective recycling strategies have to be developed taking into account some specific aspects as i) mixtures complexity: the valuable material has to be extracted from the residue, ii) overall production: the profitability of plastic can be achieved only with mass production and iii) costs: low-cost sorting processes are required. In this paper new analytical strategies, based on hyperspectral imaging in the near infrared field (1000-1700 nm), have been investigated and set up in order to define sorting and/or quality control logics that could be profitably applied, at industrial plant level, for polyolefins recycling.

Reducing the length of postnatal hospital stay: implications for cost and quality of care.

PubMed

Bowers, John; Cheyne, Helen

2016-01-15

UK health services are under pressure to make cost savings while maintaining quality of care. Typically reducing the length of time patients stay in hospital and increasing bed occupancy are advocated to achieve service efficiency. Around 800,000 women give birth in the UK each year making maternity care a high volume, high cost service. Although average length of stay on the postnatal ward has fallen substantially over the years there is pressure to make still further reductions. This paper explores and discusses the possible cost savings of further reductions in length of stay, the consequences for postnatal services in the community, and the impact on quality of care. We draw on a range of pre-existing data sources including, national level routinely collected data, workforce planning data and data from national surveys of women's experience. Simulation and a financial model were used to estimate excess demand, work intensity and bed occupancy to explore the quantitative, organisational consequences of reducing the length of stay. These data are discussed in relation to findings of national surveys to draw inferences about potential impacts on cost and quality of care. Reducing the length of time women spend in hospital after birth implies that staff and bed numbers can be reduced. However, the cost savings may be reduced if quality and access to services are maintained. Admission and discharge procedures are relatively fixed and involve high cost, trained staff time. Furthermore, it is important to retain a sufficient bed contingency capacity to ensure a reasonable level of service. If quality of care is maintained, staffing and bed capacity cannot be simply reduced proportionately: reducing average length of stay on a typical postnatal ward by six hours or 17% would reduce costs by just 8%. This might still be a significant saving over a high volume service however, earlier discharge results in more women and babies with significant care needs at home. Quality and safety of care would also require corresponding increases in community based postnatal care. Simply reducing staffing in proportion to the length of stay increases the workload for each staff member resulting in poorer quality of care and increased staff stress. Many policy debates, such as that about the length of postnatal hospital-stay, demand consideration of multiple dimensions. This paper demonstrates how diverse data sources and techniques can be integrated to provide a more holistic analysis. Our study suggests that while earlier discharge from the postnatal ward may achievable, it may not generate all of the anticipated cost savings. Some useful savings may be realised but if staff and bed capacity are simply reduced in proportion to the length of stay, care quality may be compromised.

Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova.

PubMed

Kempers, Jari; Ketting, Evert; Lesco, Galina

2014-07-21

Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result suggest that, together the three SRH components (STI, early pregnancy and contraception, and HIV) are potentially cost saving. High cost savings resulting from averted lifetime treatment cost of HIV infected persons are likely to off-set the costs of STIs and unwanted pregnancies.

Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter.

PubMed

Priftis, Alexandros; Stagos, Dimitrios; Tzioumakis, Nikolaos; Konstantinopoulos, Konstantinos; Patouna, Anastasia; Papadopoulos, Georgios E; Tsatsakis, Aristides; Kouretas, Dimitrios

2016-08-30

Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices) in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

Design of a turbofan powered regional transport aircraft

NASA Technical Reports Server (NTRS)

1991-01-01

The majority of the market for small commercial transport aircraft is dominated by high-efficiency, propeller-driven aircraft of non-U.S. manufacture. During the past year senior student design teams at Purdue developed and then responded to a Request For Proposal (RFP) for a regional transport aircraft. The RFP development identified promising world markets and their needs. The students responded by designing aircraft with ranges of up to 1500 n.m. and passenger loads of 50 to 90. During the design project, special emphasis was placed upon keeping acquisition cost and direct operating costs at a low level while providing passengers with quality comfort levels. Twelve student teams worked for one semester developing their designs. Several of the more successful designs and those that placed a high premium on innovation are described. The depth of detail and analysis in these student efforts are also illustrated.

Biomass Logistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Richard Hess; Kevin L. Kenney; William A. Smith

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements inmore » quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.« less

High throughput CIGS solar cell fabrication via ultra-thin absorber layer with optical confinement and (Cd, CBD)-free heterojunction partner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marsillac, Sylvain

2015-11-30

The main objective of this proposal was to use several pathways to reduce the production cost of Cu(In,Ga)Se 2 (CIGS) PV modules and therefore the levelized cost of energy (LCOE) associated with this technology. Three high cost drivers were identified, nominally: 1) Materials cost and availability; 2) Large scale uniformity; 3) Improved throughput These three cost drivers were targeted using the following pathways: 1) Reducing the thickness of the CIGS layer while enhancing materials quality; 2) Developing and applying enhanced in-situ metrology via real time spectroscopic ellipsometry; 3) Looking into alternative heterojunction partner, back contact and anti-reflection (AR) coating Elevenmore » main Tasks were then defined to achieve these goals (5 in Phase 1 and 6 in Phase 2), with 11 Milestones and 2 Go/No-go decision points at the end of Phase 1. The key results are summarized below« less

Using standard treatment protocols to manage costs and quality of hospital services.

PubMed

Meyer, J W; Feingold, M G

1993-06-01

The current health care environment has made it critically important that hospital costs and quality be managed in an integrated fashion. Promised health care reforms are expected to make cost reduction and quality enhancement only more important. Traditional methods of hospital cost and quality control have largely been replaced by such approaches as practice parameters, outcomes measurement, clinical indicators, clinical paths, benchmarking, patient-centered care, and a focus on patient selection criteria. This Special Report describes an integrated process for strategically managing costs and quality simultaneously, incorporating key elements of many important new quality and cost control tools. By using a multidisciplinary group process to develop standard treatment protocols, hospitals and their medical staffs address the most important services provided within major product lines. Using both clinical and financial data, groups of physicians, nurses, department managers, financial analysts, and administrators redesign key patterns of care within their hospital, incorporating the best practices of their own and other institutions. The outcome of this process is a new, standardized set of clinical guidelines that reduce unnecessary variation in care, eliminate redundant interventions, establish clear lines of communication for all caregivers, and reduce the cost of each stay. The hospital, medical staff, and patients benefit from the improved opportunities for managed care contracting, more efficient hospital systems, consensus-based quality measures, and reductions in the cost of care. STPs offer a workable and worthwhile approach to positioning the hospital of the 1990s for operational efficiency and cost and quality competitiveness.

Case-mix tool, costs and effectiveness in improving primary care mental health and substance abuse services.

PubMed

Riihimäki, Kirsi; Heiska-Johansson, Ainomaija; Ketola, Eeva

2018-02-01

Despite its importance in improving care and developing services, high-quality data evaluating cost-effectiveness and services in different case-mix populations is scarce in primary care. The objective was to investigate the service use of those mental health and substance abuse patients, who use lots of services. Primary health care diagnosis-related groups (pDRG) is a tool to evaluate service provider system and improve efficiency, productivity and quality. We viewed all pDRG results available from the year 2015 concerning municipal mental health and substance abuse services. In primary care mental health and substance abuse services, the most common ICD-10-codes were depression and substance abuse. One-fifth of patients produced 57% of costs. Their medium of appointments was 16 per year versus 6 per year of all patients. Only 54% of their diagnoses were recorded in the electronic health records versus 75% of all patients. They made 5.7 different pDRG episodes, including 1.8 episodes of depression, per patient. The average episode cost for this patient group was 301€. pDRG makes health care production transparent also in mental health and substance abuse services. It is easy to identify patients, who use a lot of services and thus induce the majority of costs, and focus on their needs in managing and developing services.

Open hardware, low cost, air quality stations for monitoring ozone in coastal area

NASA Astrophysics Data System (ADS)

Lima, Marco; Donzella, Davide; Pintus, Fabio; Fedi, Adriano; Ferrari, Daniele; Massabò, Marco

2014-05-01

Ozone concentrations in urban and coastal area are a great concern for citizens and, consequently regulator. In the last 20 years the Ozone concentration is almost doubled and it has attracted the public attention because of the well know harmful impacts on human health and biosphere in general. Official monitoring networks usually comprise high precision, high accuracy observation stations, usually managed by public administrations and environmental agency; unfortunately due to their high costs of installation and maintenance, the monitoring stations are relatively sparse. This kind of monitoring networks have been recognized to be unsuitable to effectively characterize the high variability of air quality, especially in areas where pollution sources are various and often not static. We present a prototype of a low cost station for air quality monitoring, specifically developed for complementing the official monitoring stations improving the representation of air quality spatial distribution. We focused on a semi-professional product that could guarantee the highest reliability at the lowest possible cost, supported by a consistent infrastructure for data management. We test two type of Ozone sensor electrochemical and metal oxide. This work is integrated in the ACRONET Paradigm ® project: an open-hardware platform strongly oriented on environmental monitoring. All software and hardware sources will be available on the web. Thus, a computer and a small amount of work tools will be sufficient to create new monitoring networks, with the only constraint to share all the data obtained. It will so possible to create a real "sensing community". The prototype is currently able to measure ozone level, temperature and relative humidity, but soon, with the upcoming changes, it will be able also to monitor dust, carbon monoxide and nitrogen dioxide, always through the use of commercial sensors. The sensors are grouped in a compact board that interfaces with a data-logger able to transmit data to a dedicated server through a GPRS module (no ad hoc radio infrastructure needed). Due to the GPRS low latency transmission the data are transmitted in near-real time. The prototype has an independent power supply. The sensors outputs are directly compared with the measurement of the official fixed monitoring stations. We present preliminary tests of a ozone level assessment obtained without laboratory calibration during a first field campaign in Savona (Italy); the preliminary verification and test show reasonable agreement between low cost sensors and fixed monitoring station ozone level trends (low cost sensors detect gas concentration at ppb level). The preliminary results are promising for complementing the fixed official monitoring networks with low-cost sensors.

Addressing disparities and achieving equity: cultural competence, ethics, and health-care transformation.

PubMed

Betancourt, Joseph R; Corbett, James; Bondaryk, Matthew R

2014-01-01

The passage of health-care reform and current efforts in payment reform signal the beginning of a significant transformation of the US health-care system. An entire new set of structures is being developed to facilitate increased access to care that is cost-effective and of high quality. As described in The Institute of Medicine report "Crossing the Quality Chasm," our nation is charting a path toward quality health care that aims to be safe, efficient, effective, timely, patient-centered, and equitable. As our health-care system rapidly undergoes dramatic transformation, several truths-and challenges-remain. First, racial and ethnic disparities in health care persist and are a clear sign of inequality in quality. Second, although the root causes for these disparities are complex, there exists a well-developed set of evidence-based approaches to address them; among these is improving the cultural competence of health-care providers and the health-care system. Third, as part of our care redesign, we must assure that we are prepared to meet the ethical challenges ahead and reassert the importance of equity, fairness, and caring as key building blocks of a new care delivery system. As we move ahead, it is critical to assure that our health-care system is culturally competent and has the capacity to deliver high-quality care for all, while eliminating disparities and assuring equity. Disparities are unjust, unethical, costly, and unacceptable-and integrating strategies to achieve equity as part of our health-care system's transformation will give us an incredible opportunity to comprehensively address them.

Food cost disparities in rural communities.

PubMed

Hardin-Fanning, Frances; Rayens, Mary Kay

2015-05-01

Promotion of healthy eating is an effective public health strategy to prevent chronic disease incidence and progression. However, food prices can impede healthy eating, especially in rural communities. The purpose of this study was to determine whether food costs are associated with nutritional quality, geographic location, and month of year. The Overall Nutritional Quality Index and cost of 92 foods were assessed four times over a 10-month period in the primary grocery stores in four Kentucky counties, two rural and two urban. Repeated measures analysis of variance was used to assess differences in food costs by nutritional quality, county, and month. Among more nutritious food items, costs were lower in urban areas. This was particularly true among foods in the highest quartile of nutritional quality. Across all counties, there was a pattern of highest per-serving costs in the second quartile of nutritional quality, whereas more nutritious foods were less expensive. Strategies that help individuals improve the ability to identify and prepare less costly foods with high nutritional value may be effective in improving dietary habits, particularly in rural, impoverished food deserts. © 2014 Society for Public Health Education.

Food Cost Disparities in Rural Communities

PubMed Central

Hardin-Fanning, Frances; Rayens, Mary Kay

2015-01-01

Promotion of healthy eating is an effective public health strategy to prevent chronic disease incidence and progression. However, food prices can impede healthy eating, especially in rural communities. The purpose of this study was to determine whether food costs are associated with nutritional quality, geographic location, and month of year. The Overall Nutritional Quality Index and cost of 92 foods were assessed four times over a 10-month period in the primary grocery stores in four Kentucky counties, two rural and two urban. Repeated measures analysis of variance was used to assess differences in food costs by nutritional quality, county, and month. Among more nutritious food items, costs were lower in urban areas. This was particularly true among foods in the highest quartile of nutritional quality. Across all counties, there was a pattern of highest per-serving costs in the second quartile of nutritional quality, whereas more nutritious foods were less expensive. Strategies that help individuals improve the ability to identify and prepare less costly foods with high nutritional value may be effective in improving dietary habits, particularly in rural, impoverished food deserts. PMID:25305093

Cost and Cost-Effectiveness of the Mediterranean Diet: Results of a Systematic Review

PubMed Central

Saulle, Rosella; Semyonov, Leda; La Torre, Giuseppe

2013-01-01

The growing impact of chronic degenerative pathologies (such as cardiovascular disease, type 2 diabetes and Alzheimer’s disease) requires and pushes towards the development of new preventive strategies to reduce the incidence and prevalence of these diseases. Lifestyle changes, especially related to the Mediterranean diet, have the potential to modify disease outcomes and ultimately costs related to their management. The objective of the study was to perform a systematic review of the scientific literature, to gauge the economic performance and the cost-effectiveness of the adherence to the Mediterranean diet as a prevention strategy against degenerative pathologies. We investigated the monetary costs of adopting Mediterranean dietary patterns by determining cost differences between low and high adherence. Research was conducted using the PubMed and Scopus databases. Eight articles met the pre-determined inclusion criteria and were reviewed. Quality assessment and data extraction was performed. The adherence to the Mediterranean diet has been extensively reported to be associated with a favorable health outcome and a better quality of life. The implementation of a Mediterranean dietary pattern may lead to the prevention of degenerative pathologies and to an improvement in life expectancy, a net gain in health and a reduction in total lifetime costs. PMID:24253053

Individualized cost-effectiveness analysis of patient-centered care: a case series of hospitalized patient preferences departing from practice-based guidelines.

PubMed

Padula, William V; Millis, M Andrew; Worku, Aelaf D; Pronovost, Peter J; Bridges, John F P; Meltzer, David O

2017-03-01

To develop cases of preference-sensitive care and analyze the individualized cost-effectiveness of respecting patient preference compared to guidelines. Four cases were analyzed comparing patient preference to guidelines: (a) high-risk cancer patient preferring to forgo colonoscopy; (b) decubitus patient preferring to forgo air-fluidized bed use; (c) anemic patient preferring to forgo transfusion; (d) end-of-life patient requesting all resuscitative measures. Decision trees were modeled to analyze cost-effectiveness of alternative treatments that respect preference compared to guidelines in USD per quality-adjusted life year (QALY) at a $100,000/QALY willingness-to-pay threshold from patient, provider and societal perspectives. Forgoing colonoscopy dominates colonoscopy from patient, provider, and societal perspectives. Forgoing transfusion and air-fluidized bed are cost-effective from all three perspectives. Palliative care is cost-effective from provider and societal perspectives, but not from the patient perspective. Prioritizing incorporation of patient preferences within guidelines holds good value and should be prioritized when developing new guidelines.

A Modeled Analysis of Telehealth Methods for Treating Pressure Ulcers after Spinal Cord Injury

PubMed Central

Smith, Mark W.; Hill, Michelle L.; Hopkins, Karen L.; Kiratli, B. Jenny; Cronkite, Ruth C.

2012-01-01

Home telehealth can improve clinical outcomes for conditions that are common among patients with spinal cord injury (SCI). However, little is known about the costs and potential savings associated with its use. We developed clinical scenarios that describe common situations in treatment or prevention of pressure ulcers. We calculated the cost implications of using telehealth for each scenario and under a range of reasonable assumptions. Data were gathered primarily from US Department of Veterans Affairs (VA) administrative records. For each scenario and treatment method, we multiplied probabilities, frequencies, and costs to determine the expected cost over the entire treatment period. We generated low-, medium-, and high-cost estimates based on reasonable ranges of costs and probabilities. Telehealth care was less expensive than standard care when low-cost technology was used but often more expensive when high-cost, interactive devices were installed in the patient's home. Increased utilization of telehealth technology (particularly among rural veterans with SCI) could reduce the incidence of stage III and stage IV ulcers, thereby improving veterans' health and quality of care without increasing costs. Future prospective studies of our present scenarios using patients with various healthcare challenges are recommended. PMID:22969798

The Cost-Effectiveness of Antibiotic Prophylaxis for Patients at Risk of Infective Endocarditis.

PubMed

Franklin, Matthew; Wailoo, Allan; Dayer, Mark J; Jones, Simon; Prendergast, Bernard; Baddour, Larry M; Lockhart, Peter B; Thornhill, Martin H

2016-11-15

In March 2008, the National Institute for Health and Care Excellence recommended stopping antibiotic prophylaxis (AP) for those at risk of infective endocarditis (IE) undergoing dental procedures in the United Kingdom, citing a lack of evidence of efficacy and cost-effectiveness. We have performed a new economic evaluation of AP on the basis of contemporary estimates of efficacy, adverse events, and resource implications. A decision analytic cost-effectiveness model was used. Health service costs and benefits (measured as quality-adjusted life-years) were estimated. Rates of IE before and after the National Institute for Health and Care Excellence guidance were available to estimate prophylactic efficacy. AP adverse event rates were derived from recent UK data, and resource implications were based on English Hospital Episode Statistics. AP was less costly and more effective than no AP for all patients at risk of IE. The results are sensitive to AP efficacy, but efficacy would have to be substantially lower for AP not to be cost-effective. AP was even more cost-effective in patients at high risk of IE. Only a marginal reduction in annual IE rates (1.44 cases in high-risk and 33 cases in all at-risk patients) would be required for AP to be considered cost-effective at £20 000 ($26 600) per quality-adjusted life-year. Annual cost savings of £5.5 to £8.2 million ($7.3-$10.9 million) and health gains >2600 quality-adjusted life-years could be achieved from reinstating AP in England. AP is cost-effective for preventing IE, particularly in those at high risk. These findings support the cost-effectiveness of guidelines recommending AP use in high-risk individuals. © 2016 The Authors.

The Economics of Medicare Accountable Care Organizations

PubMed Central

Blackstone, Erwin A.; Fuhr, Joseph P.

2016-01-01

Background Accountable care organizations (ACOs) have been created to improve patient care, enhance population health, and reduce costs. Medicare in particular has focused on ACOs as a primary device to improve quality and reduce costs. Objective To examine whether the current Medicare ACOs are likely to be successful. Discussion Patients receiving care in ACOs have little incentive to use low-cost quality providers. Furthermore, the start-up costs of ACOs for providers are high, contributing to the minimal financial success of ACOs. We review issues such as reducing readmissions, palliative care, and the difficulty in coordinating care, which are major cost drivers. There are mixed incentives facing hospital-controlled ACOs, whereas physician-controlled ACOs could play hospitals against each other to obtain high quality and cost reductions. This discussion also considers whether the current structure of ACOs is likely to be successful. Conclusion The question remains whether Medicare ACOs can achieve the Triple Aim of “improving the experience of care, improving the health of populations, and reducing per capita costs of health care.” Care coordination in ACOs and information technology are proving more complicated and expensive to implement than anticipated. Even if ACOs can decrease healthcare costs and increase quality, it is unclear if the current incentives system can achieve these objectives. A better public policy may be to implement a system that encompasses the best practices of successful private integrated systems rather than promoting ACOs. PMID:27066191

The Economics of Medicare Accountable Care Organizations.

PubMed

Blackstone, Erwin A; Fuhr, Joseph P

2016-02-01

Accountable care organizations (ACOs) have been created to improve patient care, enhance population health, and reduce costs. Medicare in particular has focused on ACOs as a primary device to improve quality and reduce costs. To examine whether the current Medicare ACOs are likely to be successful. Patients receiving care in ACOs have little incentive to use low-cost quality providers. Furthermore, the start-up costs of ACOs for providers are high, contributing to the minimal financial success of ACOs. We review issues such as reducing readmissions, palliative care, and the difficulty in coordinating care, which are major cost drivers. There are mixed incentives facing hospital-controlled ACOs, whereas physician-controlled ACOs could play hospitals against each other to obtain high quality and cost reductions. This discussion also considers whether the current structure of ACOs is likely to be successful. The question remains whether Medicare ACOs can achieve the Triple Aim of "improving the experience of care, improving the health of populations, and reducing per capita costs of health care." Care coordination in ACOs and information technology are proving more complicated and expensive to implement than anticipated. Even if ACOs can decrease healthcare costs and increase quality, it is unclear if the current incentives system can achieve these objectives. A better public policy may be to implement a system that encompasses the best practices of successful private integrated systems rather than promoting ACOs.

Costs of postoperative sepsis: the business case for quality improvement to reduce postoperative sepsis in veterans affairs hospitals.

PubMed

Vaughan-Sarrazin, Mary S; Bayman, Levent; Cullen, Joseph J

2011-08-01

To estimate the incremental costs associated with sepsis as a complication of general surgery, controlling for patient risk factors that may affect costs (eg, surgical complexity and comorbidity) and hospital-level variation in costs. Database analysis. One hundred eighteen Veterans Health Affairs hospitals. A total of 13 878 patients undergoing general surgery during fiscal year 2006 (October 1, 2005, through September 30, 2006). Incremental costs associated with sepsis as a complication of general surgery (controlling for patient risk factors and hospital-level variation of costs), as well as the increase in costs associated with complications that co-occur with sepsis. Costs were estimated using the Veterans Health Affairs Decision Support System, and patient risk factors and postoperative complications were identified in the Veterans Affairs Surgical Quality Improvement Program database. Overall, 564 of 13 878 patients undergoing general surgery developed postoperative sepsis, for a rate of 4.1%. The average unadjusted cost for patients with no sepsis was $24 923, whereas the average cost for patients with sepsis was 3.6 times higher at $88 747. In risk-adjusted analyses, the relative costs were 2.28 times greater for patients with sepsis relative to patients without sepsis (95% confidence interval, 2.19-2.38), with the difference in risk-adjusted costs estimated at $26 972 (ie, $21 045 vs $48 017). Sepsis often co-occurred with other types of complications, most frequently with failure to wean the patient from mechanical ventilation after 48 hours (36%), postoperative pneumonia (31%), and reintubation for respiratory or cardiac failure (29%). Costs were highest when sepsis occurred with pneumonia or failure to wean the patient from mechanical ventilation after 48 hours. Given the high cost of treating sepsis, a business case can be made for quality improvement initiatives that reduce the likelihood of postoperative sepsis.

Advanced Engineering Environments: Implications for Aerospace Manufacturing

NASA Technical Reports Server (NTRS)

Thomas, D.

2001-01-01

There are significant challenges facing today's aerospace industry. Global competition, more complex products, geographically-distributed design teams, demands for lower cost, higher reliability and safer vehicles, and the need to incorporate the latest technologies quicker all face the developer of aerospace systems. New information technologies offer promising opportunities to develop advanced engineering environments (AEEs) to meet these challenges. Significant advances in the state-of-the-art of aerospace engineering practice are envisioned in the areas of engineering design and analytical tools, cost and risk tools, collaborative engineering, and high-fidelity simulations early in the development cycle. These advances will enable modeling and simulation of manufacturing methods, which will in turn allow manufacturing considerations to be included much earlier in the system development cycle. Significant cost savings, increased quality, and decreased manufacturing cycle time are expected to result. This paper will give an overview of the NASA's Intelligent Synthesis Environment, the agency initiative to develop an AEE, with a focus on the anticipated benefits in aerospace manufacturing.

Pediatric laryngeal simulator using 3D printed models: A novel technique.

PubMed

Kavanagh, Katherine R; Cote, Valerie; Tsui, Yvonne; Kudernatsch, Simon; Peterson, Donald R; Valdez, Tulio A

2017-04-01

Simulation to acquire and test technical skills is an essential component of medical education and residency training in both surgical and nonsurgical specialties. High-quality simulation education relies on the availability, accessibility, and reliability of models. The objective of this work was to describe a practical pediatric laryngeal model for use in otolaryngology residency training. Ideally, this model would be low-cost, have tactile properties resembling human tissue, and be reliably reproducible. Pediatric laryngeal models were developed using two manufacturing methods: direct three-dimensional (3D) printing of anatomical models and casted anatomical models using 3D-printed molds. Polylactic acid, acrylonitrile butadiene styrene, and high-impact polystyrene (HIPS) were used for the directly printed models, whereas a silicone elastomer (SE) was used for the casted models. The models were evaluated for anatomic quality, ease of manipulation, hardness, and cost of production. A tissue likeness scale was created to validate the simulation model. Fleiss' Kappa rating was performed to evaluate interrater agreement, and analysis of variance was performed to evaluate differences among the materials. The SE provided the most anatomically accurate models, with the tactile properties allowing for surgical manipulation of the larynx. Direct 3D printing was more cost-effective than the SE casting method but did not possess the material properties and tissue likeness necessary for surgical simulation. The SE models of the pediatric larynx created from a casting method demonstrated high quality anatomy, tactile properties comparable to human tissue, and easy manipulation with standard surgical instruments. Their use in a reliable, low-cost, accessible, modular simulation system provides a valuable training resource for otolaryngology residents. N/A. Laryngoscope, 127:E132-E137, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Digestion-ligation-only Hi-C is an efficient and cost-effective method for chromosome conformation capture.

PubMed

Lin, Da; Hong, Ping; Zhang, Siheng; Xu, Weize; Jamal, Muhammad; Yan, Keji; Lei, Yingying; Li, Liang; Ruan, Yijun; Fu, Zhen F; Li, Guoliang; Cao, Gang

2018-05-01

Chromosome conformation capture (3C) technologies can be used to investigate 3D genomic structures. However, high background noise, high costs, and a lack of straightforward noise evaluation in current methods impede the advancement of 3D genomic research. Here we developed a simple digestion-ligation-only Hi-C (DLO Hi-C) technology to explore the 3D landscape of the genome. This method requires only two rounds of digestion and ligation, without the need for biotin labeling and pulldown. Non-ligated DNA was efficiently removed in a cost-effective step by purifying specific linker-ligated DNA fragments. Notably, random ligation could be quickly evaluated in an early quality-control step before sequencing. Moreover, an in situ version of DLO Hi-C using a four-cutter restriction enzyme has been developed. We applied DLO Hi-C to delineate the genomic architecture of THP-1 and K562 cells and uncovered chromosomal translocations. This technology may facilitate investigation of genomic organization, gene regulation, and (meta)genome assembly.

Development of a Hot Working Steel Based on a Controlled Gas-Metal-Reaction

NASA Astrophysics Data System (ADS)

Ritzenhoff, Roman; Gharbi, Mohammad Malekipour

As a result of cost sensitiveness, the demand on hot working steels with advanced characteristics and properties are ascending. We have used a controlled gas-metal-reaction in a P-ESR furnace to produce high quality hot working steel. These types of materials are also known as High Nitrogen Steels (HNS). An overview of the development in a pressurized induction furnace to the final industrial scale using P-ESR will be provided. Different heat treatment strategies are conducted and their effect on mechanical properties is investigated.

Strategic issues in preventing cataract blindness in developing countries.

PubMed Central

Ellwein, L. B.; Kupfer, C.

1995-01-01

Cataract blindness is a public health problem of major proportions in developing countries. Intracapsular cataract extraction with aphakic spectacles has been the standard surgical technique for restoring sight. Because of image magnification in the operated eye, however, the result in unilaterally blind patients is less than satisfactory. Fortunately, with the availability of low-cost intraocular lenses (IOL) and ophthalmologists trained in extracapsular surgery, it is now practical to intervene successfully in the unilateral case. The need for increased attention on the quality of the visual high prevalence of cataract blindness in developing countries and an increasing cataract incidence due to an aging population require substantial increases in surgical volume. The third issue relates to cost. If significant increases in surgical volume and quality of outcomes are to be realized without an increased need for external funding, service delivery must be made more efficient. The expansion of IOL surgery for unilateral blindness is a favourable trend in ensuring financial sustainability of delivery systems; patients can be operated on while still economically productive and able to pay rather than waiting for bilateral blindness and a less favourable economic and social impact. If the quality, volume, and cost issues are to be successfully addressed, operational and structural changes to eye care delivery systems are necessary. These changes can be effected through training, technology introduction, management of facilities, social marketing, organizational partnerships, and evaluation. With improved understanding of the critical factors in successful models their widespread replication will be facilitated. PMID:8846495

Hospital cost and quality performance in relation to market forces: an examination of U.S. community hospitals in the "post-managed care era".

PubMed

Jiang, H Joanna; Friedman, Bernard; Jiang, Shenyi

2013-03-01

Managed care substantially transformed the U.S. healthcare sector in the last two decades of the twentieth century, injecting price competition among hospitals for the first time in history. However, total HMO enrollment has declined since 2000. This study addresses whether managed care and hospital competition continued to show positive effects on hospital cost and quality performance in the "post-managed care era." Using data for 1,521 urban hospitals drawn from the Healthcare Cost and Utilization Project, we examined hospital cost per stay and mortality rate in relation to HMO penetration and hospital competition between 2001 and 2005, controlling for patient, hospital, and other market characteristics. Regression analyses were employed to examine both cross-sectional and longitudinal variation in hospital performance. We found that in markets with high HMO penetration, increase in hospital competition over time was associated with decrease in mortality but no change in cost. In markets without high HMO penetration, increase in hospital competition was associated with increase in cost but no change in mortality. Overall, hospitals in high HMO penetration markets consistently showed lower average costs, and hospitals in markets with high hospital competition consistently showed lower mortality rates. Hospitals in markets with high HMO penetration also showed lower mortality rates in 2005 with no such difference found in 2001. Our findings suggest that while managed care may have lost its strength in slowing hospital cost growth, differences in average hospital cost associated with different levels of HMO penetration across markets still persist. Furthermore, these health plans appear to put quality of care on a higher priority than before.

Bending the cost curve and increasing revenue: a family medicine model that works!

PubMed

Katz, Bernard J; Needham, Mark R

2012-12-01

This article attempts to illustrate ways in which family physician practices are able to demonstrate high value, enhanced quality, and streamlined costs, essential components of practice sustainability. Specific examples are provided to assist practices to consider questions and information that allow for skillful engagement during contract negotiations, consider increasing practice revenues by adopting practice enhancements that make sense for the location of the practice and community needs, develop workflow analyses, and review opportunities for expense reduction. Copyright © 2012 Elsevier Inc. All rights reserved.

A call to arms: economic barriers to optimal dialysis care.

PubMed

McFarlane, P A; Mendelssohn, D C

2000-01-01

Epidemic growth rates and the enormous cost of dialysis pressure end-stage renal disease (ESRD) delivery systems around the world. Payers of dialysis services can constrain costs through (1) limiting access to dialysis, (2) reducing the quality of dialysis, and (3) placing constraints on modality distribution. In order to secure the necessary resources for ESRD care, we propose that the nephrology community consider the following suggestions: First, future leaders in dialysis should acquire additional advanced training in innovative pathways such as health care economics, business and health care administration, and health care policy. Second, the international nephrology community must strongly engage in ongoing advocacy for accessible, high quality, cost-effective care.Third, efforts should be made to better define and then implement optimal dialysis modality distributions that maximize patient outcomes but limit unnecessary costs. Fourth, industry should be encouraged to lower the unit cost of dialysis, allowing for improved access to dialysis, especially in developing countries. Fifth, research should be encouraged that seeks to identify measures that will reduce dialysis costs but will not impair quality of care. Finally, early referral of patients with progressive renal disease to nephrology clinics, empowerment of informed patient choice of dialysis modality, and proper and timely access creation should be encouraged and can be expected to help limit overall expenditures. Ongoing efforts in these areas by the nephrology community will be essential if we are to overcome the challenges of ESRD growth in this new decade.

How to Develop Learners Who Are Consistently Curious and Questioning

ERIC Educational Resources Information Center

Scurry, Jamie E.; Wilburn, Ariel; Villagomez, Alex; McCarthy, Mike

2010-01-01

In a society that reaches for silver-bullet solutions, higher education is not immune from widespread attempts to raise graduation rates through scaling one-size-fits-all models at lower costs. Yet people at Big Picture Learning believe any true, long-term solution that will produce more graduates with high-quality degrees must be…

Distributed Training for the Reserve Component: Remote Delivery Using Asynchronous Computer Conferencing.

ERIC Educational Resources Information Center

Hahn, H. A.; And Others

The purposes of this research were to evaluate the cost effectiveness of using Asynchronous Computer Conferencing (ACC) and to develop guidelines for effectively conducting high quality military training using ACC. The evaluation used a portion of the Engineer Officer Advanced Course (EOAC) as a test bed. Course materials which taught the same…

Temperature Coefficient for Modeling Denitrification in Surface Water Sediments Using the Mass Transfer Coefficient

Treesearch

T. W. Appelboom; G. M. Chescheir; R. W. Skaggs; J. W. Gilliam; Devendra M. Amatya

2006-01-01

Watershed modeling has become an important tool for researchers with the high costs of water quality monitoring. When modeling nitrate transport within drainage networks, denitrification within the sediments needs to be accounted for. Birgand et. al. developed an equation using a term called a mass transfer coefficient to mathematically describe sediment...

Building Communities for the Exchange of Learning Objects: Theoretical Foundations and Requirements

ERIC Educational Resources Information Center

Koper, Rob; Pannekeet, Kees; Hendriks, Maaike; Hummel, Hans

2004-01-01

In order to reduce overall costs of developing high-quality digital courses (including both the content, and the learning and teaching activities), the exchange of learning objects has been recognized as a promising solution. This article makes an inventory of the issues involved in the exchange of learning objects within a community. It explores…

Markets and Models for Large-Scale Courseware Development.

ERIC Educational Resources Information Center

Bunderson, C. Victor

Computer-assisted instruction (CAI) is not making an important, visible impact on the educational system of this country. Though its instructional value has been proven time after time, the high cost of the hardware and the lack of quality courseware is preventing CAI from becoming a market success. In order for CAI to reach its market potential…

[Quality of medicines in least developed countries].

PubMed

Videau, J Y

2006-12-01

Due to worsening economic conditions and poor enforcement of existing pharmaceutical and customs regulations, third world countries are faced with a growing threat from counterfeit and substandard medicines. With the expansion of illicit markets in urban areas, the sales of medicines of uncertain quality and origin are increasing. Most victims of this illicit trade are among the world's poorest populations that cannot afford to buy quality drugs through private-sector distribution channels. National pharmaceutical programs promoting universal access to essential generic medicines at reasonable cost are the key to curbing this problem. A system based on strict, rational pharmaceutical purchasing and distribution policies with quality assurance at every level of the supply chain is needed to guarantee that patients receive safe effective high quality healthcare products.

A framework to evaluate the cost-effectiveness of the NADiA ProsVue slope to guide adjuvant radiotherapy among men with high-risk characteristics following prostatectomy for prostate cancer.

PubMed

Reed, Shelby D; Stewart, Suzanne Biehn; Scales, Charles D; Moul, Judd W

2014-07-01

The NADiA ProsVue is a prognostic system that measures prostate-specific antigen slope to identify men at lower risk of clinical recurrence of prostate cancer after radical prostatectomy. We developed a decision-modeling framework to evaluate its cost-effectiveness to guide the use of adjuvant radiotherapy (ART). We populated the model using patient-level data and external sources. Patients were classified as intermediate risk or high risk on the basis of Cancer of the Prostate Risk Assessment-Postsurgical (CAPRA-S) nomogram and then stratified by the ProsVue slope (≤2 pg/mL/mo; >2 pg/mL/mo) and receipt of ART. In sensitivity analyses, we varied the effect of the ProsVue slope on the use of ART and other model parameters. The cost-effectiveness of the ProsVue-guided strategy varied widely because of small differences in quality-adjusted life-years (QALYs) at 10 years. In the intermediate-risk group, when the use of ART decreased from 20% (standard care) to 7.5% among patients with a ProsVue slope value of 2 pg/mL/mo or less, the incremental cost-effectiveness ratio was $25,160/QALY. In the high-risk group, the use of ART would have to decrease from 40% (standard care) to 11.5% among those with a ProsVue slope value of 2 pg/mL/mo or less to obtain a ratio of $50,000/QALY. The cost-effectiveness ratios were sensitive to varying benefits of salvage therapy, quality of life, and costs of ART and ProsVue testing. The effect of the ProsVue system on costs will be dependent on the extent to which ART decreases among men identified as having a low risk of recurrence. Its effect on QALYs will remain conditional on uncertain clinical and quality-of-life benefits associated with ART. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Costs and outcomes of treating chronic hepatitis C patients in routine care - results from a nationwide multicenter trial.

PubMed

Stahmeyer, J T; Krauth, C; Bert, F; Pfeiffer-Vornkahl, H; Alshuth, U; Hüppe, D; Mauss, S; Rossol, S

2016-02-01

Viral hepatitis is a major public health problem affecting millions of people worldwide. Long-term consequences are the development of liver cirrhosis and hepatocellular carcinoma. The aim of the study was to assess outcomes and costs of treating patients with chronic hepatitis C in clinical practice in Germany. We carried out a prospective noninterventional study. Information on treatment outcomes, resource utilization and quality of life was provided by 281 physicians throughout Germany. Data of 3708 monoinfected HCV-patients treated between 2008 and 2011 were analysed. Therapy consisted of peginterferon/ribavirin. Mean age of patients was 43.7 years, 60.3% were male and estimated duration of infection was 13.6 years. Predominantly genotype 1 (61.3%) or 3 (28.5%) infections were observed. Sustained viral response (SVR)-rates in most frequently observed genotypes were 49.2% in GT-1 and 61.9% in GT-3 treatment-naive patients (Relapser: GT-1: 35.3% and GT-3: 57.3%; Nonresponder: GT-1: 25.0% and GT-3: 33.3%). Average treatment costs were lowest in treatment-naive patients (€18 965) and higher in patients who failed previous treatments (relapsers: €24 753; nonresponders: €19 511). Differences according to genotype were observed. Average costs per SVR in treatment-naive patients were €44 744 for GT-1 and €22 218 for GT-3. Treatment was associated with a decrease in quality of life; post-treatment quality of life was higher in patients achieving SVR. Our insight on real-life treatment outcomes and costs can serve as a reference for a comparison with other treatments. There is high need for short-term and long-term cost-effectiveness analysis in real-life settings as newly introduced treatment strategies with direct acting antivirals result in high SVR-rates but are more costly. © 2015 John Wiley & Sons Ltd.

A Multifaceted Intervention to Improve the Quality of Care of Children in District Hospitals in Kenya: A Cost-Effectiveness Analysis

PubMed Central

Barasa, Edwine W.; Ayieko, Philip; Cleary, Susan; English, Mike

2012-01-01

Background To improve care for children in district hospitals in Kenya, a multifaceted approach employing guidelines, training, supervision, feedback, and facilitation was developed, for brevity called the Emergency Triage and Treatment Plus (ETAT+) strategy. We assessed the cost effectiveness of the ETAT+ strategy, in Kenyan hospitals. Further, we estimate the costs of scaling up the intervention to Kenya nationally and potential cost effectiveness at scale. Methods and Findings Our cost-effectiveness analysis from the provider's perspective used data from a previously reported cluster randomized trial comparing the full ETAT+ strategy (n = 4 hospitals) with a partial intervention (n = 4 hospitals). Effectiveness was measured using 14 process measures that capture improvements in quality of care; their average was used as a summary measure of quality. Economic costs of the development and implementation of the intervention were determined (2009 US$). Incremental cost-effectiveness ratios were defined as the incremental cost per percentage improvement in (average) quality of care. Probabilistic sensitivity analysis was used to assess uncertainty. The cost per child admission was US$50.74 (95% CI 49.26–67.06) in intervention hospitals compared to US$31.1 (95% CI 30.67–47.18) in control hospitals. Each percentage improvement in average quality of care cost an additional US$0.79 (95% CI 0.19–2.31) per admitted child. The estimated annual cost of nationally scaling up the full intervention was US$3.6 million, approximately 0.6% of the annual child health budget in Kenya. A “what-if” analysis assuming conservative reductions in mortality suggests the incremental cost per disability adjusted life year (DALY) averted by scaling up would vary between US$39.8 and US$398.3. Conclusion Improving quality of care at scale nationally with the full ETAT+ strategy may be affordable for low income countries such as Kenya. Resultant plausible reductions in hospital mortality suggest the intervention could be cost-effective when compared to incremental cost-effectiveness ratios of other priority child health interventions. Please see later in the article for the Editors' Summary PMID:22719233

A multifaceted intervention to improve the quality of care of children in district hospitals in Kenya: a cost-effectiveness analysis.

PubMed

Barasa, Edwine W; Ayieko, Philip; Cleary, Susan; English, Mike

2012-01-01

To improve care for children in district hospitals in Kenya, a multifaceted approach employing guidelines, training, supervision, feedback, and facilitation was developed, for brevity called the Emergency Triage and Treatment Plus (ETAT+) strategy. We assessed the cost effectiveness of the ETAT+ strategy, in Kenyan hospitals. Further, we estimate the costs of scaling up the intervention to Kenya nationally and potential cost effectiveness at scale. Our cost-effectiveness analysis from the provider's perspective used data from a previously reported cluster randomized trial comparing the full ETAT+ strategy (n = 4 hospitals) with a partial intervention (n = 4 hospitals). Effectiveness was measured using 14 process measures that capture improvements in quality of care; their average was used as a summary measure of quality. Economic costs of the development and implementation of the intervention were determined (2009 US$). Incremental cost-effectiveness ratios were defined as the incremental cost per percentage improvement in (average) quality of care. Probabilistic sensitivity analysis was used to assess uncertainty. The cost per child admission was US$50.74 (95% CI 49.26-67.06) in intervention hospitals compared to US$31.1 (95% CI 30.67-47.18) in control hospitals. Each percentage improvement in average quality of care cost an additional US$0.79 (95% CI 0.19-2.31) per admitted child. The estimated annual cost of nationally scaling up the full intervention was US$3.6 million, approximately 0.6% of the annual child health budget in Kenya. A "what-if" analysis assuming conservative reductions in mortality suggests the incremental cost per disability adjusted life year (DALY) averted by scaling up would vary between US$39.8 and US$398.3. Improving quality of care at scale nationally with the full ETAT+ strategy may be affordable for low income countries such as Kenya. Resultant plausible reductions in hospital mortality suggest the intervention could be cost-effective when compared to incremental cost-effectiveness ratios of other priority child health interventions.

Constructing high-quality bounding volume hierarchies for N-body computation using the acceptance volume heuristic

NASA Astrophysics Data System (ADS)

Olsson, O.

2018-01-01

We present a novel heuristic derived from a probabilistic cost model for approximate N-body simulations. We show that this new heuristic can be used to guide tree construction towards higher quality trees with improved performance over current N-body codes. This represents an important step beyond the current practice of using spatial partitioning for N-body simulations, and enables adoption of a range of state-of-the-art algorithms developed for computer graphics applications to yield further improvements in N-body simulation performance. We outline directions for further developments and review the most promising such algorithms.

Development of an asthma disease management program in a children's hospital.

PubMed

Miller, Kelly; Ward-Smith, Peggy; Cox, Karen; Jones, Erika M; Portnoy, Jay M

2003-11-01

The incidence, morbidity, and mortality of asthma have been increasing at an alarming rate, making asthma the most common chronic illness of childhood. An asthma disease management program was developed to improve the care and management of patients with asthma--a comprehensive health care delivery model that was designed to improve the management of patients with asthma was designed and implemented. The goal of the program was to provide high-quality interventions for those children diagnosed with asthma. The asthma disease management program at Children's Mercy Hospital improved the care received, decreased costs, and improved the quality of life for those children with asthma.

Re-engineering Nascom's network management architecture

NASA Technical Reports Server (NTRS)

Drake, Brian C.; Messent, David

1994-01-01

The development of Nascom systems for ground communications began in 1958 with Project Vanguard. The low-speed systems (rates less than 9.6 Kbs) were developed following existing standards; but, there were no comparable standards for high-speed systems. As a result, these systems were developed using custom protocols and custom hardware. Technology has made enormous strides since the ground support systems were implemented. Standards for computer equipment, software, and high-speed communications exist and the performance of current workstations exceeds that of the mainframes used in the development of the ground systems. Nascom is in the process of upgrading its ground support systems and providing additional services. The Message Switching System (MSS), Communications Address Processor (CAP), and Multiplexer/Demultiplexer (MDM) Automated Control System (MACS) are all examples of Nascom systems developed using standards such as, X-windows, Motif, and Simple Network Management Protocol (SNMP). Also, the Earth Observing System (EOS) Communications (Ecom) project is stressing standards as an integral part of its network. The move towards standards has produced a reduction in development, maintenance, and interoperability costs, while providing operational quality improvement. The Facility and Resource Manager (FARM) project has been established to integrate the Nascom networks and systems into a common network management architecture. The maximization of standards and implementation of computer automation in the architecture will lead to continued cost reductions and increased operational efficiency. The first step has been to derive overall Nascom requirements and identify the functionality common to all the current management systems. The identification of these common functions will enable the reuse of processes in the management architecture and promote increased use of automation throughout the Nascom network. The MSS, CAP, MACS, and Ecom projects have indicated the potential value of commercial-off-the-shelf (COTS) and standards through reduced cost and high quality. The FARM will allow the application of the lessons learned from these projects to all future Nascom systems.

The burden of endometriosis: costs and quality of life of women with endometriosis and treated in referral centres.

PubMed

Simoens, Steven; Dunselman, Gerard; Dirksen, Carmen; Hummelshoj, Lone; Bokor, Attila; Brandes, Iris; Brodszky, Valentin; Canis, Michel; Colombo, Giorgio Lorenzo; DeLeire, Thomas; Falcone, Tommaso; Graham, Barbara; Halis, Gülden; Horne, Andrew; Kanj, Omar; Kjer, Jens Jørgen; Kristensen, Jens; Lebovic, Dan; Mueller, Michael; Vigano, Paola; Wullschleger, Marcel; D'Hooghe, Thomas

2012-05-01

This study aimed to calculate costs and health-related quality of life of women with endometriosis-associated symptoms treated in referral centres. A prospective, multi-centre, questionnaire-based survey measured costs and quality of life in ambulatory care and in 12 tertiary care centres in 10 countries. The study enrolled women with a diagnosis of endometriosis and with at least one centre-specific contact related to endometriosis-associated symptoms in 2008. The main outcome measures were health care costs, costs of productivity loss, total costs and quality-adjusted life years. Predictors of costs were identified using regression analysis. Data analysis of 909 women demonstrated that the average annual total cost per woman was €9579 (95% confidence interval €8559-€10 599). Costs of productivity loss of €6298 per woman were double the health care costs of €3113 per woman. Health care costs were mainly due to surgery (29%), monitoring tests (19%) and hospitalization (18%) and physician visits (16%). Endometriosis-associated symptoms generated 0.809 quality-adjusted life years per woman. Decreased quality of life was the most important predictor of direct health care and total costs. Costs were greater with increasing severity of endometriosis, presence of pelvic pain, presence of infertility and a higher number of years since diagnosis. Our study invited women to report resource use based on endometriosis-associated symptoms only, rather than drawing on a control population of women without endometriosis. Our study showed that the economic burden associated with endometriosis treated in referral centres is high and is similar to other chronic diseases (diabetes, Crohn's disease, rheumatoid arthritis). It arises predominantly from productivity loss, and is predicted by decreased quality of life.

Cost Effective Prototyping

NASA Technical Reports Server (NTRS)

Wickman, Jerry L.; Kundu, Nikhil K.

1996-01-01

This laboratory exercise seeks to develop a cost effective prototype development. The exercise has the potential of linking part design, CAD, mold development, quality control, metrology, mold flow, materials testing, fixture design, automation, limited parts production and other issues as related to plastics manufacturing.

The carbohydrate-fat problem: can we construct a healthy diet based on dietary guidelines?

PubMed

Drewnowski, Adam

2015-05-01

The inclusion of nutrition economics in dietary guidance would help ensure that the Dietary Guidelines for Americans benefit equally all segments of the US population. The present review outlines some novel metrics of food affordability that assess nutrient density of foods and beverages in relation to cost. Socioeconomic disparities in diet quality in the United States are readily apparent. In general, groups of lower socioeconomic status consume cheaper, lower-quality diets and suffer from higher rates of noncommunicable diseases. Nutrient profiling models, initially developed to assess the nutrient density of foods, can be turned into econometric models that assess both calories and nutrients per reference amount and per unit cost. These novel metrics have been used to identify individual foods that were affordable, palatable, culturally acceptable, and nutrient rich. Not all nutrient-rich foods were expensive. In dietary surveys, both local and national, some high-quality diets were associated with relatively low cost. Those population subgroups that successfully adopted dietary guidelines at an unexpectedly low monetary cost were identified as "positive deviants." Constructing a healthy diet based on dietary guidelines can be done, provided that nutrient density of foods, their affordability, as well as taste and social norms are all taken into account. © 2015 American Society for Nutrition.

The development and application of composite complexity models and a relative complexity metric in a software maintenance environment

NASA Technical Reports Server (NTRS)

Hops, J. M.; Sherif, J. S.

1994-01-01

A great deal of effort is now being devoted to the study, analysis, prediction, and minimization of software maintenance expected cost, long before software is delivered to users or customers. It has been estimated that, on the average, the effort spent on software maintenance is as costly as the effort spent on all other software costs. Software design methods should be the starting point to aid in alleviating the problems of software maintenance complexity and high costs. Two aspects of maintenance deserve attention: (1) protocols for locating and rectifying defects, and for ensuring that noe new defects are introduced in the development phase of the software process; and (2) protocols for modification, enhancement, and upgrading. This article focuses primarily on the second aspect, the development of protocols to help increase the quality and reduce the costs associated with modifications, enhancements, and upgrades of existing software. This study developed parsimonious models and a relative complexity metric for complexity measurement of software that were used to rank the modules in the system relative to one another. Some success was achieved in using the models and the relative metric to identify maintenance-prone modules.

Bristle-sensors—low-cost flexible passive dry EEG electrodes for neurofeedback and BCI applications

NASA Astrophysics Data System (ADS)

Grozea, Cristian; Voinescu, Catalin D.; Fazli, Siamac

2011-04-01

In this paper, we present a new, low-cost dry electrode for EEG that is made of flexible metal-coated polymer bristles. We examine various standard EEG paradigms, such as capturing occipital alpha rhythms, testing for event-related potentials in an auditory oddball paradigm and performing a sensory motor rhythm-based event-related (de-) synchronization paradigm to validate the performance of the novel electrodes in terms of signal quality. Our findings suggest that the dry electrodes that we developed result in high-quality EEG recordings and are thus suitable for a wide range of EEG studies and BCI applications. Furthermore, due to the flexibility of the novel electrodes, greater comfort is achieved in some subjects, this being essential for long-term use.

Efficiency of antenatal care and childbirth services in selected primary health care facilities in rural Tanzania: a cross-sectional study.

PubMed

Saronga, Happiness P; Duysburgh, Els; Massawe, Siriel; Dalaba, Maxwell A; Savadogo, Germain; Tonchev, Pencho; Dong, Hengjin; Sauerborn, Rainer; Loukanova, Svetla

2014-02-28

Cost studies are paramount for demonstrating how resources have been spent and identifying opportunities for more efficient use of resources. The main objective of this study was to assess the actual dimension and distribution of the costs of providing antenatal care (ANC) and childbirth services in selected rural primary health care facilities in Tanzania. In addition, the study analyzed determining factors of service provision efficiency in order to inform health policy and planning. This was a retrospective quantitative cross-sectional study conducted in 11 health centers and dispensaries in Lindi and Mtwara rural districts. Cost analysis was carried out using step down cost accounting technique. Unit costs reflected efficiency of service provision. Multivariate regression analysis on the drivers of observed relative efficiency in service provision between the study facilities was conducted. Reported personnel workload was also described. The health facilities spent on average 7 USD per capita in 2009. As expected, fewer resources were spent for service provision at dispensaries than at health centers. Personnel costs contributed a high approximate 44% to total costs. ANC and childbirth consumed approximately 11% and 12% of total costs; and 8% and 10% of reported service provision time respectively. On average, unit costs were rather high, 16 USD per ANC visit and 79.4 USD per childbirth. The unit costs showed variation in relative efficiency in providing the services between the health facilities. The results showed that efficiency in ANC depended on the number of staff, structural quality of care, process quality of care and perceived quality of care. Population-staff ratio and structural quality of basic emergency obstetric care services highly influenced childbirth efficiency. Differences in the efficiency of service provision present an opportunity for efficiency improvement. Taking into consideration client heterogeneity, quality improvements are possible and necessary. This will stimulate utilization of ANC and childbirth services in resource-constrained health facilities. Efficiency analyses through simple techniques such as measurement of unit costs should be made standard in health care provision, health managers can then use the performance results to gauge progress and reward efficiency through performance based incentives.

Cryopreservation in Closed Bag Systems as an Alternative to Clean Rooms for Preparations of Peripheral Blood Stem Cells.

PubMed

Spoerl, Silvia; Peter, Robert; Krackhardt, Angela M

2016-01-01

Autologous and allogeneic stem cell transplantation (SCT) represents a therapeutic option widely used for hematopoietic malignancies. One important milestone in the development of this treatment strategy was the development of effective cryopreservation technologies resulting in a high quality with respect to cell viability as well as lack of contamination of the graft.Stem cell preparations have been initially performed within standard laboratories as it is routinely still the case in many countries. With the emergence of cleanrooms, manufacturing of stem cell preparations within these facilities has become a new standard mandatory in Europe. However, due to high costs and laborious procedures, novel developments recently emerged using closed bag systems as reliable alternatives to conventional cleanrooms. Several hurdles needed to be overcome including the addition of the cryoprotectant dimethylsulfoxide (DMSO) as a relevant manipulation. As a result of the development, closed bag systems proved to be comparable in terms of product quality and patient outcome to cleanroom products. They also comply with the strict regulations of good manufacturing practice.With closed systems being available, costs and efforts of a cleanroom facility may be substantially reduced in the future. The process can be easily extended for other cell preparations requiring minor modifications as donor lymphocyte preparations. Moreover, novel developments may provide solutions for the production of advanced-therapy medicinal products in closed systems.

Molecular Breeding to Create Optimized Crops: From Genetic Manipulation to Potential Applications in Plant Factories.

PubMed

Hiwasa-Tanase, Kyoko; Ezura, Hiroshi

2016-01-01

Crop cultivation in controlled environment plant factories offers great potential to stabilize the yield and quality of agricultural products. However, many crops are currently unsuited to these environments, particularly closed cultivation systems, due to space limitations, low light intensity, high implementation costs, and high energy requirements. A major barrier to closed system cultivation is the high running cost, which necessitates the use of high-margin crops for economic viability. High-value crops include those with enhanced nutritional value or containing additional functional components for pharmaceutical production or with the aim of providing health benefits. In addition, it is important to develop cultivars equipped with growth parameters that are suitable for closed cultivation. Small plant size is of particular importance due to the limited cultivation space. Other advantageous traits are short production cycle, the ability to grow under low light, and high nutriculture availability. Cost-effectiveness is improved from the use of cultivars that are specifically optimized for closed system cultivation. This review describes the features of closed cultivation systems and the potential application of molecular breeding to create crops that are optimized for cost-effectiveness and productivity in closed cultivation systems.

Molecular Breeding to Create Optimized Crops: From Genetic Manipulation to Potential Applications in Plant Factories

PubMed Central

Hiwasa-Tanase, Kyoko; Ezura, Hiroshi

2016-01-01

Crop cultivation in controlled environment plant factories offers great potential to stabilize the yield and quality of agricultural products. However, many crops are currently unsuited to these environments, particularly closed cultivation systems, due to space limitations, low light intensity, high implementation costs, and high energy requirements. A major barrier to closed system cultivation is the high running cost, which necessitates the use of high-margin crops for economic viability. High-value crops include those with enhanced nutritional value or containing additional functional components for pharmaceutical production or with the aim of providing health benefits. In addition, it is important to develop cultivars equipped with growth parameters that are suitable for closed cultivation. Small plant size is of particular importance due to the limited cultivation space. Other advantageous traits are short production cycle, the ability to grow under low light, and high nutriculture availability. Cost-effectiveness is improved from the use of cultivars that are specifically optimized for closed system cultivation. This review describes the features of closed cultivation systems and the potential application of molecular breeding to create crops that are optimized for cost-effectiveness and productivity in closed cultivation systems. PMID:27200016

Maximizing cost-effectiveness by adjusting treatment strategy according to glaucoma severity

PubMed Central

Guedes, Ricardo Augusto Paletta; Guedes, Vanessa Maria Paletta; Gomes, Carlos Eduardo de Mello; Chaoubah, Alfredo

2016-01-01

Abstract Background: The aim of this study is to determine the most cost-effective strategy for the treatment of primary open-angle glaucoma (POAG) in Brazil, from the payer's perspective (Brazilian Public Health System) in the setting of the Glaucoma Referral Centers. Methods: Study design was a cost-effectiveness analysis of different treatment strategies for POAG. We developed 3 Markov models (one for each glaucoma stage: early, moderate and advanced), using a hypothetical cohort of POAG patients, from the perspective of the Brazilian Public Health System (SUS) and a horizon of the average life expectancy of the Brazilian population. Different strategies were tested according to disease severity. For early glaucoma, we compared observation, laser and medications. For moderate glaucoma, medications, laser and surgery. For advanced glaucoma, medications and surgery. Main outcome measures were ICER (incremental cost-effectiveness ratio), medical direct costs and QALY (quality-adjusted life year). Results: In early glaucoma, both laser and medical treatment were cost-effective (ICERs of initial laser and initial medical treatment over observation only, were R$ 2,811.39/QALY and R$ 3,450.47/QALY). Compared to observation strategy, the two alternatives have provided significant gains in quality of life. In moderate glaucoma population, medical treatment presented the highest costs among treatment strategies. Both laser and surgery were highly cost-effective in this group. For advanced glaucoma, both tested strategies were cost-effective. Starting age had a great impact on results in all studied groups. Initiating glaucoma therapy using laser or surgery were more cost-effective, the younger the patient. Conclusion: All tested treatment strategies for glaucoma provided real gains in quality of life and were cost-effective. However, according to the disease severity, not all strategies provided the same cost-effectiveness profile. Based on our findings, there should be a preferred strategy for each glaucoma stage, according to a cost-effectiveness ratio ranking. PMID:28033286

A model to estimate the cost effectiveness of the indoorenvironment improvements in office work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seppanen, Olli; Fisk, William J.

2004-06-01

Deteriorated indoor climate is commonly related to increases in sick building syndrome symptoms, respiratory illnesses, sick leave, reduced comfort and losses in productivity. The cost of deteriorated indoor climate for the society is high. Some calculations show that the cost is higher than the heating energy costs of the same buildings. Also building-level calculations have shown that many measures taken to improve indoor air quality and climate are cost-effective when the potential monetary savings resulting from an improved indoor climate are included as benefits gained. As an initial step towards systemizing these building level calculations we have developed a conceptualmore » model to estimate the cost-effectiveness of various measures. The model shows the links between the improvements in the indoor environment and the following potential financial benefits: reduced medical care cost, reduced sick leave, better performance of work, lower turn over of employees, and lower cost of building maintenance due to fewer complaints about indoor air quality and climate. The pathways to these potential benefits from changes in building technology and practices go via several human responses to the indoor environment such as infectious diseases, allergies and asthma, sick building syndrome symptoms, perceived air quality, and thermal environment. The model also includes the annual cost of investments, operation costs, and cost savings of improved indoor climate. The conceptual model illustrates how various factors are linked to each other. SBS symptoms are probably the most commonly assessed health responses in IEQ studies and have been linked to several characteristics of buildings and IEQ. While the available evidence indicates that SBS symptoms can affect these outcomes and suspects that such a linkage exists, at present we can not quantify the relationships sufficiently for cost-benefit modeling. New research and analyses of existing data to quantify the financial importance of SBS symptoms would enable more widespread consideration of the effects of IEQ in cost benefit calculations.« less

State-of-the-Art for Small Satellite Propulsion Systems

NASA Technical Reports Server (NTRS)

Parker, Khary I.

2016-01-01

SmallSats are a low cost access to space with an increasing need for propulsion systems. NASA, and other organizations, will be using SmallSats that require propulsion systems to: a) Conduct high quality near and far reaching on-orbit research and b) Perform technology demonstrations. Increasing call for high reliability and high performing for SmallSat components. Many SmallSat propulsion technologies are currently under development: a) Systems at various levels of maturity and b) Wide variety of systems for many mission applications.

Laboratory Innovation Towards Quality Program Sustainability.

PubMed

Abimiku, Alash'le; Timperi, Ralph; Blattner, William

2016-08-01

Laboratory innovation significantly affects program sustainability of HIV programs in low and middle income countries (LMICs) far beyond its immediate sphere of impact. Innovation in rapid development of diagnostic technologies, improved quality management systems, strengthened laboratory management, affordable external quality assurance and accreditation schemes, and building local capacity have reduced costs, brought quality improvement to point-of-care testing, increased access to testing services, reduced treatment and prevention costs and opened the door to the real possibility of ending the AIDS epidemic. However, for effectively implemented laboratory innovation to contribute to HIV quality program sustainability, it must be implemented within the overall context of the national strategic plan and HIV treatment programs. The high quality of HIV rapid diagnostic test was a breakthrough that made it possible for more persons to learn their HIV status, receive counseling, and if infected to receive treatment. Likewise, the use of dried blood spots made the shipment of samples easier for the assessment of different variables of HIV infection-molecular diagnosis, CD4+ cell counts, HIV antibodies, drug resistance surveillance, and even antiretroviral drug level measurements. Such advancement is critical for to reaching the UNAIDS target of 90-90-90 and for bringing the AIDS epidemic to an end, especially in LMICs.

HIV cure strategies: how good must they be to improve on current antiretroviral therapy?

PubMed

Sax, Paul E; Sypek, Alexis; Berkowitz, Bethany K; Morris, Bethany L; Losina, Elena; Paltiel, A David; Kelly, Kathleen A; Seage, George R; Walensky, Rochelle P; Weinstein, Milton C; Eron, Joseph; Freedberg, Kenneth A

2014-01-01

We examined efficacy, toxicity, relapse, cost, and quality-of-life thresholds of hypothetical HIV cure interventions that would make them cost-effective compared to life-long antiretroviral therapy (ART). We used a computer simulation model to assess three HIV cure strategies: Gene Therapy, Chemotherapy, and Stem Cell Transplantation (SCT), each compared to ART. Efficacy and cost parameters were varied widely in sensitivity analysis. Outcomes included quality-adjusted life expectancy, lifetime cost, and cost-effectiveness in dollars/quality-adjusted life year ($/QALY) gained. Strategies were deemed cost-effective with incremental cost-effectiveness ratios <$100,000/QALY. For patients on ART, discounted quality-adjusted life expectancy was 16.4 years and lifetime costs were $591,400. Gene Therapy was cost-effective with efficacy of 10%, relapse rate 0.5%/month, and cost $54,000. Chemotherapy was cost-effective with efficacy of 88%, relapse rate 0.5%/month, and cost $12,400/month for 24 months. At $150,000/procedure, SCT was cost-effective with efficacy of 79% and relapse rate 0.5%/month. Moderate efficacy increases and cost reductions made Gene Therapy cost-saving, but substantial efficacy/cost changes were needed to make Chemotherapy or SCT cost-saving. Depending on efficacy, relapse rate, and cost, cure strategies could be cost-effective compared to current ART and potentially cost-saving. These results may help provide performance targets for developing cure strategies for HIV.

Robust Decision Making to Support Water Quality Climate Adaptation: a Case Study in the Chesapeake Bay Watershed

NASA Astrophysics Data System (ADS)

Fischbach, J. R.; Lempert, R. J.; Molina-Perez, E.

2017-12-01

The U.S. Environmental Protection Agency (USEPA), together with state and local partners, develops watershed implementation plans designed to meet water quality standards. Climate uncertainty, along with uncertainty about future land use changes or the performance of water quality best management practices (BMPs), may make it difficult for these implementation plans to meet water quality goals. In this effort, we explored how decision making under deep uncertainty (DMDU) methods such as Robust Decision Making (RDM) could help USEPA and its partners develop implementation plans that are more robust to future uncertainty. The study focuses on one part of the Chesapeake Bay watershed, the Patuxent River, which is 2,479 sq km in area, highly urbanized, and has a rapidly growing population. We simulated the contribution of stormwater contaminants from the Patuxent to the overall Total Maximum Daily Load (TMDL) for the Chesapeake Bay under multiple scenarios reflecting climate and other uncertainties. Contaminants considered included nitrogen, phosphorus, and sediment loads. The assessment included a large set of scenario simulations using the USEPA Chesapeake Bay Program's Phase V watershed model. Uncertainties represented in the analysis included 18 downscaled climate projections (based on 6 general circulation models and 3 emissions pathways), 12 land use scenarios with different population projections and development patterns, and alternative assumptions about BMP performance standards and efficiencies associated with different suites of stormwater BMPs. Finally, we developed cost estimates for each of the performance standards and compared cost to TMDL performance as a key tradeoff for future water quality management decisions. In this talk, we describe how this research can help inform climate-related decision support at USEPA's Chesapeake Bay Program, and more generally how RDM and other DMDU methods can support improved water quality management under climate uncertainty.

Low-cost, high-density sensor network for urban emission monitoring: BEACO2N

NASA Astrophysics Data System (ADS)

Kim, J.; Shusterman, A.; Lieschke, K.; Newman, C.; Cohen, R. C.

2017-12-01

In urban environments, air quality is spatially and temporally heterogeneous as diverse emission sources create a high degree of variability even at the neighborhood scale. Conventional air quality monitoring relies on continuous measurements with limited spatial resolution or passive sampling with high-density and low temporal resolution. Either approach averages the air quality information over space or time and hinders our attempts to understand emissions, chemistry, and human exposure in the near-field of emission sources. To better capture the true spatio-temporal heterogeneity of urban conditions, we have deployed a low-cost, high-density air quality monitoring network in San Francisco Bay Area distributed at 2km horizontal spacing. The BErkeley Atmospheric CO2 Observation Network (BEACO2N) consists of approximately 50 sensor nodes, measuring CO2, CO, NO, NO2, O­3, and aerosol. Here we describe field-based calibration approaches that are consistent with the low-cost strategy of the monitoring network. Observations that allow inference of emission factors and identification of specific local emission sources will also be presented.

Development and implementation of an automatic integration system for fibre optic sensors in the braiding process with the objective of online-monitoring of composite structures

NASA Astrophysics Data System (ADS)

Hufenbach, W.; Gude, M.; Czulak, A.; Kretschmann, Martin

2014-04-01

Increasing economic, political and ecological pressure leads to steadily rising percentage of modern processing and manufacturing processes for fibre reinforced polymers in industrial batch production. Component weights beneath a level achievable by classic construction materials, which lead to a reduced energy and cost balance during product lifetime, justify the higher fabrication costs. However, complex quality control and failure prediction slow down the substitution by composite materials. High-resolution fibre-optic sensors (FOS), due their low diameter, high measuring point density and simple handling, show a high applicability potential for an automated sensor-integration in manufacturing processes, and therefore the online monitoring of composite products manufactured in industrial scale. Integrated sensors can be used to monitor manufacturing processes, part tests as well as the component structure during product life cycle, which simplifies allows quality control during production and the optimization of single manufacturing processes.[1;2] Furthermore, detailed failure analyses lead to a enhanced understanding of failure processes appearing in composite materials. This leads to a lower wastrel number and products of a higher value and longer product life cycle, whereby costs, material and energy are saved. This work shows an automation approach for FOS-integration in the braiding process. For that purpose a braiding wheel has been supplemented with an appliance for automatic sensor application, which has been used to manufacture preforms of high-pressure composite vessels with FOS-networks integrated between the fibre layers. All following manufacturing processes (vacuum infiltration, curing) and component tests (quasi-static pressure test, programmed delamination) were monitored with the help of the integrated sensor networks. Keywords: SHM, high-pressure composite vessel, braiding, automated sensor integration, pressure test, quality control, optic-fibre sensors, Rayleigh, Luna Technologies

Production system with process quality control: modelling and application

NASA Astrophysics Data System (ADS)

Tsou, Jia-Chi

2010-07-01

Over the past decade, there has been a great deal of research dedicated to the study of quality and the economics of production. In this article, we develop a dynamic model which is based on the hypothesis of a traditional economic production quantity model. Taguchi's cost of poor quality is used to evaluate the cost of poor quality in the dynamic production system. A practical case from the automotive industry, which uses the Six-sigma DMAIC methodology, is discussed to verify the proposed model. This study shows that there is an optimal value of quality investment to make the production system reach a reasonable quality level and minimise the production cost. Based on our model, the management can adjust its investment in quality improvement to generate considerable financial return.

Care fragmentation, quality, and costs among chronically ill patients.

PubMed

Frandsen, Brigham R; Joynt, Karen E; Rebitzer, James B; Jha, Ashish K

2015-05-01

To assess the relationship between care fragmentation and both quality and costs of care for commercially insured, chronically ill patients. We used claims data from 2004 to 2008 for 506,376 chronically ill, privately insured enrollees of a large commercial insurance company to construct measures of fragmentation. We included patients in the sample if they had chronic conditions in any of the following categories: cardiovascular disease, diabetes, asthma, arthritis, or migraine. We assigned each patient a fragmentation index based on the patterns of care of their primary care provider (PCP), with care patterns spread across a higher number of providers considered to be more fragmented. We used regression analysis to examine the relationship between fragmentation and both quality and cost outcomes. Patients of PCPs in the highest quartile of fragmentation had a higher chance of having a departure from clinical best practice (32.8%, vs 25.9% among patients of PCPs in the lowest quartile of fragmentation; P < .001). Similarly, patients of PCPs with high fragmentation had higher rates of preventable hospitalizations (9.1% in highest quartile vs 7.1% in lowest quartile; P < .001). High fragmentation was associated with $4542 higher healthcare spending ($10,396 in the highest quartile vs $5854 in the lowest quartile; P < .001). We found similar or larger effects on quality and costs among patients when we examined the most frequently occurring disease groups individually. Chronically ill patients whose primary care providers offer highly fragmented care more often experience lapses in care quality and incur greater healthcare costs.

Cost of Operating Central Cancer Registries and Factors That Affect Cost: Findings From an Economic Evaluation of Centers for Disease Control and Prevention National Program of Cancer Registries.

PubMed

Tangka, Florence K L; Subramanian, Sujha; Beebe, Maggie Cole; Weir, Hannah K; Trebino, Diana; Babcock, Frances; Ewing, Jean

2016-01-01

The Centers for Disease Control and Prevention (CDC) evaluated the economics of the National Program of Cancer Registries to provide the CDC, the registries, and policy makers with the economics evidence-base to make optimal decisions about resource allocation. Cancer registry budgets are under increasing threat, and, therefore, systematic assessment of the cost will identify approaches to improve the efficiencies of this vital data collection operation and also justify the funding required to sustain registry operations. To estimate the cost of cancer registry operations and to assess the factors affecting the cost per case reported by National Program of Cancer Registries-funded central cancer registries. We developed a Web-based cost assessment tool to collect 3 years of data (2009-2011) from each National Program of Cancer Registries-funded registry for all actual expenditures for registry activities (including those funded by other sources) and factors affecting registry operations. We used a random-effects regression model to estimate the impact of various factors on cost per cancer case reported. The cost of reporting a cancer case varied across the registries. Central cancer registries that receive high-quality data from reporting sources (as measured by the percentage of records passing automatic edits) and electronic data submissions, and those that collect and report on a large volume of cases had significantly lower cost per case. The volume of cases reported had a large effect, with low-volume registries experiencing much higher cost per case than medium- or high-volume registries. Our results suggest that registries operate with substantial fixed or semivariable costs. Therefore, sharing fixed costs among low-volume contiguous state registries, whenever possible, and centralization of certain processes can result in economies of scale. Approaches to improve quality of data submitted and increasing electronic reporting can also reduce cost.

Cost of Operating Central Cancer Registries and Factors That Affect Cost: Findings From an Economic Evaluation of Centers for Disease Control and Prevention National Program of Cancer Registries

PubMed Central

Tangka, Florence K. L.; Subramanian, Sujha; Beebe, Maggie Cole; Weir, Hannah K.; Trebino, Diana; Babcock, Frances; Ewing, Jean

2016-01-01

Context The Centers for Disease Control and Prevention evaluated the economics of the National Program of Cancer Registries to provide the Centers for Disease Control and Prevention, the registries, and policy makers with the economic evidence-base to make optimal decisions about resource allocation. Cancer registry budgets are under increasing threat, and, therefore, systematic assessment of the cost will identify approaches to improve the efficiencies of this vital data collection operation and also justify the funding required to sustain registry operations. Objectives To estimate the cost of cancer registry operations and to assess the factors affecting the cost per case reported by National Program of Cancer Registries–funded central cancer registries. Methods We developed a Web-based cost assessment tool to collect 3 years of data (2009-2011) from each National Program of Cancer Registries–funded registry for all actual expenditures for registry activities (including those funded by other sources) and factors affecting registry operations. We used a random-effects regression model to estimate the impact of various factors on cost per cancer case reported. Results The cost of reporting a cancer case varied across the registries. Central cancer registries that receive high-quality data from reporting sources (as measured by the percentage of records passing automatic edits) and electronic data submissions, and those that collect and report on a large volume of cases had significantly lower cost per case. The volume of cases reported had a large effect, with low-volume registries experiencing much higher cost per case than medium- or high-volume registries. Conclusions Our results suggest that registries operate with substantial fixed or semivariable costs. Therefore, sharing fixed costs among low-volume contiguous state registries, whenever possible, and centralization of certain processes can result in economies of scale. Approaches to improve quality of data submitted and increasing electronic reporting can also reduce cost. PMID:26642226

Lessons Learned on Quality (of) Standards

NASA Astrophysics Data System (ADS)

Gerlich, Rainer; Gerlich, Ralf

2011-08-01

Standards are used to describe and ensure the quality of products, services and processes throughout almost all branches of industry, including the field of software engineering. Contractors and suppliers are obligated by their customers and certification authorities to follow a certain set of standards during development. For example, a customer can easier actively participate in and control the contractor's process when enforcing a standard process..However, as with any requirement, a standard may also impede the contractor or supplier in assuring actual quality of the product in the sense of fitness for the purpose intended by the customer.This is the case when a standard defines specific quality assurance activities requiring a considerable amount of effort while other more efficient but equivalent or even superior approaches are blocked. Then improvement of the ratio between cost and quality exceeding miniscule advances is heavily impeded.While in some parts being too specific in defining the mechanisms of the enforced process, standards are sometimes too weak in defining the principles or goals on control of product quality.Therefore this paper addresses the following issues: (1) Which conclusions can be drawn on the quality and efficiency of a standard? (2) If and how is it possible to improve or evolve a standard? (3) How well does a standard guide a user towards high quality of the end product?One conclusion is that the analyzed standards do interfere with technological innovation, though the standards leave a lot of freedom for concretization and are understood as technology-independent.Another conclusion is that standards are not only a matter of quality but also a matter of competitiveness of the industry depending on resulting costs and time-to- market. When the costs induced by a standard are not adequate to the achievable quality, industry encounters a significant disadvantage.

Impact of air pollution control costs on the cost and spatial arrangement of cellulosic biofuel production in the U.S.

PubMed

Murphy, Colin W; Parker, Nathan C

2014-02-18

Air pollution emissions regulation can affect the location, size, and technology choice of potential biofuel production facilities. Difficulty in obtaining air pollutant emission permits and the cost of air pollution control devices have been cited by some fuel producers as barriers to development. This paper expands on the Geospatial Bioenergy Systems Model (GBSM) to evaluate the effect of air pollution control costs on the availability, cost, and distribution of U.S. biofuel production by subjecting potential facility locations within U.S. Clean Air Act nonattainment areas, which exceed thresholds for healthy air quality, to additional costs. This paper compares three scenarios: one with air quality costs included, one without air quality costs, and one in which conversion facilities were prohibited in Clean Air Act nonattainment areas. While air quality regulation may substantially affect local decisions regarding siting or technology choices, their effect on the system as a whole is small. Most biofuel facilities are expected to be sited near to feedstock supplies, which are seldom in nonattainment areas. The average cost per unit of produced energy is less than 1% higher in the scenarios with air quality compliance costs than in scenarios without such costs. When facility construction is prohibited in nonattainment areas, the costs increase by slightly over 1%, due to increases in the distance feedstock is transported to facilities in attainment areas.

Low-cost foods: how do they compare with their brand name equivalents? A French study.

PubMed

Darmon, Nicole; Caillavet, France; Joly, Caroline; Maillot, Matthieu; Drewnowski, Adam

2009-06-01

Consumers are increasingly relying on low-cost foods, although it is not clear if the nutritional quality of these foods is fully maintained. The aim of the present work was to analyse the relationship between cost and quality within a given food category. The relationship was analysed between nutritional quality and cost for 220 food products belonging to seventeen different categories, controlling for package type and package size. Given that a summary of nutrient information was not available on the product label, a novel ingredient quality score was developed based on listed product ingredients. Within a given category, the lowest-priced foods were not different from the equivalent branded products in terms of overall energy or total fat content. Nevertheless, a positive relationship, small but significant, was observed between the price and the ingredient quality score. On average, the branded products cost 2.5 times more than the low-cost products, for an equivalent energy and lipid content, and had a slightly higher (1.3 times) ingredient quality score. More studies are necessary to evaluate the nutritional quality of low-cost foods. This evaluation would be facilitated if nutrition labelling was mandatory. Yet in view of the present results, it does not seem to be justified to divert consumers, especially the poorest, from low-cost foods because this may have an adverse effect on the nutritional quality of their diet, by reducing further the fraction of their food budget spent on fresh fruit and vegetables.

Monitoring urban air quality using a high-density network of low-cost sensor nodes in Oslo, Norway.

NASA Astrophysics Data System (ADS)

Castell, Nuria; Schneider, Philipp; Vogt, Matthias; Dauge, Franck R.; Lahoz, William; Bartonova, Alena

2017-04-01

Urban air quality represents a major public health burden and is a long-standing concern to citizens. Air pollution is associated with a range of diseases, symptoms and conditions that impair health and quality of life. In Oslo, traffic, especially exhaust from heavy-duty and private diesel vehicles and dust resuspension from studded tyres, together with wood burning in winter, are the main sources of pollution. Norway, as part of the European Economic Area, is obliged to comply with the European air quality regulations and ensure clean air. Despite this, Oslo has exceeded both the NO2 and PM10 thresholds for health protection defined in the Directive 2008/50/EC. The air quality in the Oslo area is continuously monitored in 12 compliance monitoring stations. These stations provide reliable and accurate data but their density is too low to provide a detailed spatial distribution of air quality. The emergence of low-cost nodes enables observations at high spatial resolution, providing the opportunity to enhance existing monitoring systems. However, the data generated by these nodes is significantly less accurate and precise than the data provided by reference equipment. We have conducted an evaluation of low-cost nodes to monitor NO2 and PM10, comparing the data collected with low-cost nodes against CEN (European Standardization Organization) reference analysers. During January and March 2016, a network of 24 nodes was deployed in Oslo. During January, high NO2 levels were observed for several days in a row coinciding with the formation of a thermal inversion. During March, we observed an episode with high PM10 levels due to road dust resuspension. Our results show that there is a major technical challenge associated with current commercial low-cost sensors, regarding the sensor robustness and measurement repeatability. Despite this, low-cost sensor nodes are able to reproduce the NO2 and PM10 variability. The data from the sensors was employed to generate detailed NO2 and PM10 air quality maps using a data fusion technique. This way we were able to offer localized air quality information for the city of Oslo. The outlook for commercial low-cost sensors is promising, and our results show that currently some sensors are already capable of providing coarse information about air quality, indicating if the air quality is good, moderate or if the air is heavily polluted. This type of information could be suitable for applications that aim to raise awareness, or engage the community by monitoring local air quality, as such applications do not require the same accuracy as scientific or regulatory monitoring.

Mobil process converts methanol to high-quality synthetic gasoline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, A.

1978-12-11

If production of gasoline from coal becomes commercially attractive in the United States, a process under development at the Mobil Research and Development Corp. may compete with better known coal liquefaction processes. Mobil process converts methanol to high-octane, unleaded gasoline; methanol can be produced commercially from coal. If gasoline is the desired product, the Mobil process offers strong technical and cost advantages over H-coal, Exxon donor solvent, solvent-refined coal, and Fischer--Tropsch processes. The cost analysis, contained in a report to the Dept. of Energy, concludes that the Mobil process produces more-expensive liquid products than any other liquefaction process except Fischer--Tropsch.more » But Mobil's process produces ready-to-use gasoline, while the others produce oils which require further expensive refining to yield gasoline. Disadvantages and advantages are discussed.« less

Measure Guideline: Ventilation Guidance for Residential High-Performance New Construction - Multifamily

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lstiburek, Joseph

2017-01-01

The measure guideline provides ventilation guidance for residential high performance multifamily construction that incorporates the requirements of the ASHRAE 62.2 ventilation and indoor air quality standard. The measure guideline focus is on the decision criteria for weighing cost and performance of various ventilation systems. The measure guideline is intended for contractors, builders, developers, designers and building code officials. The guide may also be helpful to building owners wishing to learn more about ventilation strategies available for their buildings. The measure guideline includes specific design and installation instructions for the most cost effective and performance effective solutions for ventilation in multifamilymore » units that satisfies the requirements of ASHRAE 62.2-2016.« less

Measure Guideline: Ventilation Guidance for Residential High-Performance New Construction - Multifamily

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lstiburek, Joseph

The measure guideline provides ventilation guidance for residential high performance multifamily construction that incorporates the requirements of the ASHRAE 62.2 ventilation and indoor air quality standard. The measure guideline focus is on the decision criteria for weighing cost and performance of various ventilation systems. The measure guideline is intended for contractors, builders, developers, designers and building code officials. The guide may also be helpful to building owners wishing to learn more about ventilation strategies available for their buildings. The measure guideline includes specific design and installation instructions for the most cost effective and performance effective solutions for ventilation in multifamilymore » units that satisfies the requirements of ASHRAE 62.2-2016.« less

Cost-utility of a disease management program for patients with asthma.

PubMed

Steuten, Lotte; Palmer, Stephen; Vrijhoef, Bert; van Merode, Frits; Spreeuwenberg, Cor; Severens, Hans

2007-01-01

The long-term cost-utility of a disease management program (DMP) for adults with asthma was assessed compared to usual care. A DMP for patients with asthma has been developed and implemented in the region of Maastricht (The Netherlands). By integrating care, the program aims to continuously improve quality of care within existing budgets. A clinical trial was performed over a period of 15 months to collect data on costs and effects of the program and usual care. These data were used to inform a probabilistic decision-analytic model to estimate the 5-year impact of the program beyond follow-up. A societal perspective was adopted, with outcomes assessed in terms of costs per quality-adjusted life-year (QALY). The DMP is associated with a gain in QALYs compared to usual care (2.7+/-.2 versus 3.4+/-.8), at lower costs (3,302+/-314 euro versus 2,973+/-304 euro), thus leading to dominance. The probability that disease management is the more cost-effective strategy is 76 percent at a societal willingness to pay (WTP) for an additional QALY of 0 euro, reaching 95 percent probability at a WTP of 1,000 euro per additional QALY. Organizing health care according to the principles of disease management for adults with asthma has a high probability of being cost-effective and is associated with a gain in QALYs at lower costs.

The Effect of State Regulatory Stringency on Nursing Home Quality

PubMed Central

Mukamel, Dana B; Weimer, David L; Harrington, Charlene; Spector, William D; Ladd, Heather; Li, Yue

2012-01-01

Objective To test the hypothesis that more stringent quality regulations contribute to better quality nursing home care and to assess their cost-effectiveness. Data Sources/Setting Primary and secondary data from all states and U.S. nursing homes between 2005 and 2006. Study Design We estimated seven models, regressing quality measures on the Harrington Regulation Stringency Index and control variables. To account for endogeneity between regulation and quality, we used instrumental variables techniques. Quality was measured by staffing hours by type per case-mix adjusted day, hotel expenditures, and risk-adjusted decline in activities of daily living, high-risk pressure sores, and urinary incontinence. Data Collection All states' licensing and certification offices were surveyed to obtain data about deficiencies. Secondary data included the Minimum Data Set, Medicare Cost Reports, and the Economic Freedom Index. Principal Findings Regulatory stringency was significantly associated with better quality for four of the seven measures studied. The cost-effectiveness for the activities-of-daily-living measure was estimated at about 72,000 in 2011/ Quality Adjusted Life Year. Conclusions Quality regulations lead to better quality in nursing homes along some dimensions, but not all. Our estimates of cost-effectiveness suggest that increased regulatory stringency is in the ballpark of other acceptable cost-effective practices. PMID:22946859

Assessing Quality of Data Standards: Framework and Illustration Using XBRL GAAP Taxonomy

NASA Astrophysics Data System (ADS)

Zhu, Hongwei; Wu, Harris

The primary purpose of data standards or metadata schemas is to improve the interoperability of data created by multiple standard users. Given the high cost of developing data standards, it is desirable to assess the quality of data standards. We develop a set of metrics and a framework for assessing data standard quality. The metrics include completeness and relevancy. Standard quality can also be indirectly measured by assessing interoperability of data instances. We evaluate the framework using data from the financial sector: the XBRL (eXtensible Business Reporting Language) GAAP (Generally Accepted Accounting Principles) taxonomy and US Securities and Exchange Commission (SEC) filings produced using the taxonomy by approximately 500 companies. The results show that the framework is useful and effective. Our analysis also reveals quality issues of the GAAP taxonomy and provides useful feedback to taxonomy users. The SEC has mandated that all publicly listed companies must submit their filings using XBRL. Our findings are timely and have practical implications that will ultimately help improve the quality of financial data.

Clinical and economic impact of antibiotic resistance in developing countries: A systematic review and meta-analysis.

PubMed

Founou, Raspail Carrel; Founou, Luria Leslie; Essack, Sabiha Yusuf

2017-01-01

Despite evidence of the high prevalence of antibiotic resistant infections in developing countries, studies on the clinical and economic impact of antibiotic resistance (ABR) to inform interventions to contain its emergence and spread are limited. The aim of this study was to analyze the published literature on the clinical and economic implications of ABR in developing countries. A systematic search was carried out in Medline via PubMed and Web of Sciences and included studies published from January 01, 2000 to December 09, 2016. All papers were considered and a quality assessment was performed using the Newcastle-Ottawa quality assessment scale (NOS). Of 27 033 papers identified, 40 studies met the strict inclusion and exclusion criteria and were finally included in the qualitative and quantitative analysis. Mortality was associated with resistant bacteria, and statistical significance was evident with an odds ratio (OR) 2.828 (95%CI, 2.231-3.584; p = 0.000). ESKAPE pathogens was associated with the highest risk of mortality and with high statistical significance (OR 3.217; 95%CIs; 2.395-4.321; p = 0.001). Eight studies showed that ABR, and especially antibiotic-resistant ESKAPE bacteria significantly increased health care costs. ABR is associated with a high mortality risk and increased economic costs with ESKAPE pathogens implicated as the main cause of increased mortality. Patients with non-communicable disease co-morbidities were identified as high-risk populations.

Clinical and economic impact of antibiotic resistance in developing countries: A systematic review and meta-analysis

PubMed Central

Founou, Luria Leslie; Essack, Sabiha Yusuf

2017-01-01

Introduction Despite evidence of the high prevalence of antibiotic resistant infections in developing countries, studies on the clinical and economic impact of antibiotic resistance (ABR) to inform interventions to contain its emergence and spread are limited. The aim of this study was to analyze the published literature on the clinical and economic implications of ABR in developing countries. Methods A systematic search was carried out in Medline via PubMed and Web of Sciences and included studies published from January 01, 2000 to December 09, 2016. All papers were considered and a quality assessment was performed using the Newcastle-Ottawa quality assessment scale (NOS). Results Of 27 033 papers identified, 40 studies met the strict inclusion and exclusion criteria and were finally included in the qualitative and quantitative analysis. Mortality was associated with resistant bacteria, and statistical significance was evident with an odds ratio (OR) 2.828 (95%CI, 2.231–3.584; p = 0.000). ESKAPE pathogens was associated with the highest risk of mortality and with high statistical significance (OR 3.217; 95%CIs; 2.395–4.321; p = 0.001). Eight studies showed that ABR, and especially antibiotic-resistant ESKAPE bacteria significantly increased health care costs. Conclusion ABR is associated with a high mortality risk and increased economic costs with ESKAPE pathogens implicated as the main cause of increased mortality. Patients with non-communicable disease co-morbidities were identified as high-risk populations. PMID:29267306

SequenceL: Automated Parallel Algorithms Derived from CSP-NT Computational Laws

NASA Technical Reports Server (NTRS)

Cooke, Daniel; Rushton, Nelson

2013-01-01

With the introduction of new parallel architectures like the cell and multicore chips from IBM, Intel, AMD, and ARM, as well as the petascale processing available for highend computing, a larger number of programmers will need to write parallel codes. Adding the parallel control structure to the sequence, selection, and iterative control constructs increases the complexity of code development, which often results in increased development costs and decreased reliability. SequenceL is a high-level programming language that is, a programming language that is closer to a human s way of thinking than to a machine s. Historically, high-level languages have resulted in decreased development costs and increased reliability, at the expense of performance. In recent applications at JSC and in industry, SequenceL has demonstrated the usual advantages of high-level programming in terms of low cost and high reliability. SequenceL programs, however, have run at speeds typically comparable with, and in many cases faster than, their counterparts written in C and C++ when run on single-core processors. Moreover, SequenceL is able to generate parallel executables automatically for multicore hardware, gaining parallel speedups without any extra effort from the programmer beyond what is required to write the sequen tial/singlecore code. A SequenceL-to-C++ translator has been developed that automatically renders readable multithreaded C++ from a combination of a SequenceL program and sample data input. The SequenceL language is based on two fundamental computational laws, Consume-Simplify- Produce (CSP) and Normalize-Trans - pose (NT), which enable it to automate the creation of parallel algorithms from high-level code that has no annotations of parallelism whatsoever. In our anecdotal experience, SequenceL development has been in every case less costly than development of the same algorithm in sequential (that is, single-core, single process) C or C++, and an order of magnitude less costly than development of comparable parallel code. Moreover, SequenceL not only automatically parallelizes the code, but since it is based on CSP-NT, it is provably race free, thus eliminating the largest quality challenge the parallelized software developer faces.

A Pilot Cost-Effectiveness Analysis of Treatments in Newly Diagnosed High-Grade Gliomas: The Example of 5-Aminolevulinic Acid Compared With White-Light Surgery

PubMed Central

Alves, Marta; Castel-Branco, Marta; Stummer, Walter

2015-01-01

BACKGROUND: High-grade gliomas are aggressive, incurable tumors characterized by extensive diffuse invasion of the normal brain parenchyma. Novel therapies at best prolong survival; their costs are formidable and benefit is marginal. Economic restrictions thus require knowledge of the cost-effectiveness of treatments. Here, we show the cost-effectiveness of enhanced resections in malignant glioma surgery using a well-characterized tool for intraoperative tumor visualization, 5-aminolevulinic acid (5-ALA). OBJECTIVE: To evaluate the cost-effectiveness of 5-ALA fluorescence-guided neurosurgery compared with white-light surgery in adult patients with newly diagnosed high-grade glioma, adopting the perspective of the Portuguese National Health Service. METHODS: We used a Markov model (cohort simulation). Transition probabilities were estimated with the use of data from 1 randomized clinical trial and 1 noninterventional prospective study. Utility values and resource use were obtained from published literature and expert opinion. Unit costs were taken from official Portuguese reimbursement lists (2012 values). The health outcomes considered were quality-adjusted life-years, life-years, and progression-free life-years. Extensive 1-way and probabilistic sensitivity analyses were performed. RESULTS: The incremental cost-effectiveness ratios are below €10 000 in all evaluated outcomes, being around €9100 per quality-adjusted life-year gained, €6700 per life-year gained, and €8800 per progression-free life-year gained. The probability of 5-ALA fluorescence-guided surgery cost-effectiveness at a threshold of €20000 is 96.0% for quality-adjusted life-year, 99.6% for life-year, and 98.8% for progression-free life-year. CONCLUSION: 5-ALA fluorescence-guided surgery appears to be cost-effective in newly diagnosed high-grade gliomas compared with white-light surgery. This example demonstrates cost-effectiveness analyses for malignant glioma surgery to be feasible on the basis of existing data. ABBREVIATIONS: 5-ALA, 5-aminolevulinic acid ICER, incremental cost-effectiveness ratio LY, life-year PFLY, progression-free life-year QALY, quality-adjusted life-year PMID:25714513

Review of functional markers for improving cooking, eating, and the nutritional qualities of rice

PubMed Central

Lau, Wendy C. P.; Rafii, Mohd Y.; Ismail, Mohd R.; Puteh, Adam; Latif, Mohammad A.; Ramli, Asfaliza

2015-01-01

After yield, quality is one of the most important aspects of rice breeding. Preference for rice quality varies among cultures and regions; therefore, rice breeders have to tailor the quality according to the preferences of local consumers. Rice quality assessment requires routine chemical analysis procedures. The advancement of molecular marker technology has revolutionized the strategy in breeding programs. The availability of rice genome sequences and the use of forward and reverse genetics approaches facilitate gene discovery and the deciphering of gene functions. A well-characterized gene is the basis for the development of functional markers, which play an important role in plant genotyping and, in particular, marker-assisted breeding. In addition, functional markers offer advantages that counteract the limitations of random DNA markers. Some functional markers have been applied in marker-assisted breeding programs and have successfully improved rice quality to meet local consumers’ preferences. Although functional markers offer a plethora of advantages over random genetic markers, the development and application of functional markers should be conducted with care. The decreasing cost of sequencing will enable more functional markers for rice quality improvement to be developed, and application of these markers in rice quality breeding programs is highly anticipated. PMID:26528304

Developing Collections With Get It Now: A Pilot Project for a Hybrid Collection.

PubMed

Hendler, Gail Y; Gudenas, Jean

2016-01-01

As health sciences libraries transition from print to online journal collections that require significant institutional funding, librarians are investigating the use of on demand services in order to meet customer need and contain costs. In 2014 a three-year pilot project to determine if unmediated access to the Copyright Clearance Center's Get It Now service would expand access to needed content and provide usage data to inform collections decision making. The service provides rapid, automated delivery of unsubscribed, high-quality journal articles directly to the customer. The three-year pilot project aims to compare the cost of Get It Now to the traditional subscription model to learn if the service is a cost-effective and sustainable alternative that improves customer satisfaction and that can transform collection development with a hybrid model for journal acquisitions.

Lake Erie Wastewater Management Study.

DTIC Science & Technology

1982-09-01

quality problems, the causes of these problems, and a cost- effective strategy to improve Lake Erie’s water quality.Numerous questions remain...unanswered about the exact relationship between land use and water quality and about the effectiveness of the proposed management strategy. However, enough...Dr. Terry J. Logan of Ohio State University who wrote the biological availa- bility section and developed cost effectiveness of different Best

Electron Beam Cured Epoxy Resin Composites for High Temperature Applications

NASA Technical Reports Server (NTRS)

Janke, Christopher J.; Dorsey, George F.; Havens, Stephen J.; Lopata, Vincent J.; Meador, Michael A.

1997-01-01

Electron beam curing of Polymer Matrix Composites (PMC's) is a nonthermal, nonautoclave curing process that has been demonstrated to be a cost effective and advantageous alternative to conventional thermal curing. Advantages of electron beam curing include: reduced manufacturing costs; significantly reduced curing times; improvements in part quality and performance; reduced environmental and health concerns; and improvement in material handling. In 1994 a Cooperative Research and Development Agreement (CRADA), sponsored by the Department of Energy Defense Programs and 10 industrial partners, was established to advance the electron beam curing of PMC technology. Over the last several years a significant amount of effort within the CRADA has been devoted to the development and optimization of resin systems and PMCs that match the performance of thermal cured composites. This highly successful materials development effort has resulted in a board family of high performance, electron beam curable cationic epoxy resin systems possessing a wide range of excellent processing and property profiles. Hundreds of resin systems, both toughened and untoughened, offering unlimited formulation and processing flexibility have been developed and evaluated in the CRADA program.

Cost-effectiveness analysis of oral fentanyl formulations for breakthrough cancer pain treatment

PubMed Central

Cortesi, Paolo Angelo; D’Angiolella, Lucia Sara; Vellucci, Renato; Allegri, Massimo; Casale, Giuseppe; Favaretti, Carlo; Kheiraoui, Flavia; Cesana, Giancarlo; Mantovani, Lorenzo Giovanni

2017-01-01

Breakthrough cancer Pain (BTcP) has a high prevalence in cancer population. Patients with BTcP reported relevant health care costs and poor quality of life. The study assessed the cost-effectiveness of the available Oral Fentanyl Formulations (OFFs) for BTcP in Italy. A decision-analytical model was developed to estimate costs and benefits associated with treatments, from the Italian NHS perspective. Expected reductions in pain intensity per BTcP episodes were translated into, percentage of BTcP reduction, resource use and Quality-Adjusted-Life-Years (QALYs). Relative efficacy, resources used and unit costs data were derived from the literature and validated by clinical experts. Probabilistic and deterministic sensitivity analyses were performed. At base-case analysis, Sublingual Fentanyl Citrate (FCSL) compared to other oral formulations reported a lower patient’s cost (€1,960.8) and a higher efficacy (18.7% of BTcP avoided and 0.0507 QALYs gained). The sensitivity analyses confirmed the main results in all tested scenarios, with the highest impact reported by BTcP duration and health care resources consumption parameters. Between OFFs, FCSL is the cost-effective option due to faster reduction of pain intensity. However, new research is needed to better understand the economic and epidemiologic impact of BTcP, and to collect more robust data on economic and quality of life impact of the different fentanyl formulations. Different fentanyl formulations are available to manage BTcP in cancer population. The study is the first that assesses the different impact in terms of cost and effectiveness of OFFs, providing new information to better allocate the resources available to treat BTcP and highlighting the need of better data. PMID:28654672

Rapid and Simultaneous Prediction of Eight Diesel Quality Parameters through ATR-FTIR Analysis.

PubMed

Nespeca, Maurilio Gustavo; Hatanaka, Rafael Rodrigues; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

2018-01-01

Quality assessment of diesel fuel is highly necessary for society, but the costs and time spent are very high while using standard methods. Therefore, this study aimed to develop an analytical method capable of simultaneously determining eight diesel quality parameters (density; flash point; total sulfur content; distillation temperatures at 10% (T10), 50% (T50), and 85% (T85) recovery; cetane index; and biodiesel content) through attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and the multivariate regression method, partial least square (PLS). For this purpose, the quality parameters of 409 samples were determined using standard methods, and their spectra were acquired in ranges of 4000-650 cm -1 . The use of the multivariate filters, generalized least squares weighting (GLSW) and orthogonal signal correction (OSC), was evaluated to improve the signal-to-noise ratio of the models. Likewise, four variable selection approaches were tested: manual exclusion, forward interval PLS (FiPLS), backward interval PLS (BiPLS), and genetic algorithm (GA). The multivariate filters and variables selection algorithms generated more fitted and accurate PLS models. According to the validation, the FTIR/PLS models presented accuracy comparable to the reference methods and, therefore, the proposed method can be applied in the diesel routine monitoring to significantly reduce costs and analysis time.

Rapid and Simultaneous Prediction of Eight Diesel Quality Parameters through ATR-FTIR Analysis

PubMed Central

Hatanaka, Rafael Rodrigues; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

2018-01-01

Quality assessment of diesel fuel is highly necessary for society, but the costs and time spent are very high while using standard methods. Therefore, this study aimed to develop an analytical method capable of simultaneously determining eight diesel quality parameters (density; flash point; total sulfur content; distillation temperatures at 10% (T10), 50% (T50), and 85% (T85) recovery; cetane index; and biodiesel content) through attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and the multivariate regression method, partial least square (PLS). For this purpose, the quality parameters of 409 samples were determined using standard methods, and their spectra were acquired in ranges of 4000–650 cm−1. The use of the multivariate filters, generalized least squares weighting (GLSW) and orthogonal signal correction (OSC), was evaluated to improve the signal-to-noise ratio of the models. Likewise, four variable selection approaches were tested: manual exclusion, forward interval PLS (FiPLS), backward interval PLS (BiPLS), and genetic algorithm (GA). The multivariate filters and variables selection algorithms generated more fitted and accurate PLS models. According to the validation, the FTIR/PLS models presented accuracy comparable to the reference methods and, therefore, the proposed method can be applied in the diesel routine monitoring to significantly reduce costs and analysis time. PMID:29629209

Imaging characterization of a new gamma ray detector based on CRY019 scintillation crystal for PET and SPECT applications

NASA Astrophysics Data System (ADS)

Polito, C.; Pani, R.; Trigila, C.; Cinti, M. N.; Fabbri, A.; Frantellizzi, V.; De Vincentis, G.; Pellegrini, R.; Pani, R.

2017-02-01

In the last 40 years, in the field of Molecular Medicine imaging there has been a huge growth in the employment and in the improvement of detectors for PET and SPECT applications in order to reach accurate diagnosis of the diseases. The most important feature required to these detectors is an high quality of images that is usually obtained benefitting from the development of a wide number of new scintillation crystals with high imaging performances. In this contest, features like high detection efficiency, short decay time, great spectral match with photodetectors, absence of afterglow and low costs are surely attractive. However, there are other factors playing an important role in the realization of high quality images such as energy and spatial resolutions, position linearity and contrast resolution. With the aim to realize an high performace gamma ray detector for PET and SPECT applications, this work is focused on the evaluation of the imaging characteristics of a recently developed scintillation crystal, CRY019.

A systematic review and overview of health economic evaluations of emergency laparotomy.

PubMed

Bampoe, Sohail; Odor, Peter M; Ramani Moonesinghe, S; Dickinson, Matthew

2017-01-01

Little is known about the economic impact of emergency laparotomy (EL) surgery in healthcare systems around the world. The aim of this systematic review is to describe the primary resource utilisation, healthcare economic and societal costs of EL in adults in different countries. MEDLINE, EMBASE, ISI Web of Knowledge, Cochrane Central Register Controlled Trials, Cochrane Database of Systematic Reviews and CINAHL were searched for full and partial economic analyses of EL published between 1 January 1991 and 31 December 2015. Quality of studies was assessed using the Consensus on Health Economic Criteria (CHEC) checklist. Sixteen studies were included from a range of countries. One study was a full economic analysis. Fifteen studies were partial economic evaluations. These studies revealed that emergency abdominal surgery is expensive compared to similar elective surgery when comparing primary resource utilisation costs, with an important societal impact. Most contemporaneous studies indicate that in-hospital costs for EL are in excess of US$10,000 per patient episode, rising substantially when societal costs are considered. EL is a high-risk and costly procedure with a disproportionate financial burden for healthcare providers, relative to national funding provisions and wider societal cost impact. There is substantial heterogeneity in the methodologies and quality of published economic evaluations of EL; therefore, the true economic costs of EL are yet to be fully defined. Future research should focus on developing strategies to embed health economic evaluations within national programmes aiming to improve EL care, including developing the required measures and infrastructure. Emergency laparotomy is expensive, with a significant cost burden to healthcare and systems and society worldwide. Novel strategies for reducing this econmic burden should urgently be explored if greater access to this type of surgery is to be pursued as a global health target. PROSPERO registration no. 42015027210.

Cost of New Technologies in Prostate Cancer Treatment: Systematic Review of Costs and Cost Effectiveness of Robotic-assisted Laparoscopic Prostatectomy, Intensity-modulated Radiotherapy, and Proton Beam Therapy.

PubMed

Schroeck, Florian Rudolf; Jacobs, Bruce L; Bhayani, Sam B; Nguyen, Paul L; Penson, David; Hu, Jim

2017-11-01

Some of the high costs of robot-assisted radical prostatectomy (RARP), intensity-modulated radiotherapy (IMRT), and proton beam therapy may be offset by better outcomes or less resource use during the treatment episode. To systematically review the literature to identify the key economic trade-offs implicit in a particular treatment choice for prostate cancer. We systematically reviewed the literature according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) statement and protocol. We searched Medline, Embase, and Web of Science for articles published between January 2001 and July 2016, which compared the treatment costs of RARP, IMRT, or proton beam therapy to the standard treatment. We identified 37, nine, and three studies, respectively. RARP is costlier than radical retropubic prostatectomy for hospitals and payers. However, RARP has the potential for a moderate cost advantage for payers and society over a longer time horizon when optimal cancer and quality-of-life outcomes are achieved. IMRT is more expensive from a payer's perspective compared with three-dimensional conformal radiotherapy, but also more cost effective when defined by an incremental cost effectiveness ratio <$50 000 per quality-adjusted life year. Proton beam therapy is costlier than IMRT and its cost effectiveness remains unclear given the limited comparative data on outcomes. Using the Grades of Recommendation, Assessment, Development and Evaluation approach, the quality of evidence was low for RARP and IMRT, and very low for proton beam therapy. Treatment with new versus traditional technologies is costlier. However, given the low quality of evidence and the inconsistencies across studies, the precise difference in costs remains unclear. Attempts to estimate whether this increased cost is worth the expense are hampered by the uncertainty surrounding improvements in outcomes, such as cancer control and side effects of treatment. If the new technologies can consistently achieve better outcomes, then they may be cost effective. We review the cost and cost effectiveness of robot-assisted radical prostatectomy, intensity-modulated radiotherapy, and proton beam therapy in prostate cancer treatment. These technologies are costlier than their traditional counterparts. It remains unclear whether their use is associated with improved cure and reduced morbidity, and whether the increased cost is worth the expense. Published by Elsevier B.V.

In Search of Cost-Effective Schools.

ERIC Educational Resources Information Center

Raywid, Mary Anne; Shaheen, Thomas A.

1994-01-01

Examines major cost-effectiveness proposals, describing developments that highlight concerns over making schools cost effective. The article discusses ways to blend the concerns of educational quality, equity, and costs (district consolidations, shared service and facilities arrangements, new accountability strategies, new information systems,…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joseph, T.W.

The Department of Energy (DOE) recognized the need and accepts the responsibility for understanding the reality and mitigating the consequence of the complex chemical contamination legacy it inherited as well as controlling, reducing, and eliminating extant emissions and effluents. The key to maneuvering through this complicated and multifaceted labyrinth of concerns, from which a meaningful, high quality, and cost-effective restoration/mitigation machine is then set in motions, is the ability to perform accurate, factual, and explicit health and environmental/ecological risk assessments. Likewise, the common denominator for carrying out this essential task is to have access to comprehensive and reliable data ofmore » known quality with which to perform those analyses. DOE is committed to identifying the data universe; to technically scrutinize and ensure the quality of that data; to develop efficient and cost-effective means to maximize the handling, utilization, and sharing of that universe; and to undertake those assessments. DOE views this as an effort that can only be accomplished through a merging of the technical excellence that exists within federal and state agencies, academia, and industry. The task at hand is so large that only by integrating that intelligence base can we hope to accomplish the goals of establishing meaningful standards, developing functional and effective solutions, and providing quality guidance at a national scale.« less

Forward osmosis niches in seawater desalination and wastewater reuse.

PubMed

Valladares Linares, R; Li, Z; Sarp, S; Bucs, Sz S; Amy, G; Vrouwenvelder, J S

2014-12-01

This review focuses on the present status of forward osmosis (FO) niches in two main areas: seawater desalination and wastewater reuse. Specific applications for desalination and impaired-quality water treatment and reuse are described, as well as the benefits, advantages, challenges, costs and knowledge gaps on FO hybrid systems are discussed. FO can play a role as a bridge to integrate upstream and downstream water treatment processes, to reduce the energy consumption of the entire desalination or water recovery and reuse processes, thus achieving a sustainable solution for the water-energy nexus. FO hybrid membrane systems showed to have advantages over traditional membrane process like high pressure reverse osmosis and nanofiltration for desalination and wastewater treatment: (i) chemical storage and feed water systems may be reduced for capital, operational and maintenance cost, (ii) water quality is improved, (iii) reduced process piping costs, (iv) more flexible treatment units, and (v) higher overall sustainability of the desalination and wastewater treatment process. Nevertheless, major challenges make FO systems not yet a commercially viable technology, the most critical being the development of a high flux membrane, capable of maintaining an elevated salt rejection and a reduced internal concentration polarization effect, and the availability of appropriate draw solutions (cost effective and non-toxic), which can be recirculated via an efficient recovery process. This review article highlights the features of hybrid FO systems and specifically provides the state-of-the-art applications in the water industry in a novel classification and based on the latest developments toward scaling up these systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Solution to the Problem of Calibration of Low-Cost Air Quality Measurement Sensors in Networks.

PubMed

Miskell, Georgia; Salmond, Jennifer A; Williams, David E

2018-04-27

We provide a simple, remote, continuous calibration technique suitable for application in a hierarchical network featuring a few well-maintained, high-quality instruments ("proxies") and a larger number of low-cost devices. The ideas are grounded in a clear definition of the purpose of a low-cost network, defined here as providing reliable information on air quality at small spatiotemporal scales. The technique assumes linearity of the sensor signal. It derives running slope and offset estimates by matching mean and standard deviations of the sensor data to values derived from proxies over the same time. The idea is extremely simple: choose an appropriate proxy and an averaging-time that is sufficiently long to remove the influence of short-term fluctuations but sufficiently short that it preserves the regular diurnal variations. The use of running statistical measures rather than cross-correlation of sites means that the method is robust against periods of missing data. Ideas are first developed using simulated data and then demonstrated using field data, at hourly and 1 min time-scales, from a real network of low-cost semiconductor-based sensors. Despite the almost naïve simplicity of the method, it was robust for both drift detection and calibration correction applications. We discuss the use of generally available geographic and environmental data as well as microscale land-use regression as means to enhance the proxy estimates and to generalize the ideas to other pollutants with high spatial variability, such as nitrogen dioxide and particulates. These improvements can also be used to minimize the required number of proxy sites.

Reimbursement decisions of the All Wales Medicines Strategy Group: influence of policy and clinical and economic factors.

PubMed

Linley, Warren G; Hughes, Dyfrig A

2012-09-01

There have been several explorations of factors influencing the reimbursement decisions of the National Institute for Health and Clinical Excellence (NICE) but not of other UK-based health technology assessment (HTA) organizations. This study aimed to explore the factors influencing the recommendations of the All Wales Medicines Strategy Group (AWMSG) on the use of new medicines in Wales. Based on public data, logistic regression models were developed to evaluate the influence of cost effectiveness, the quality and quantity of clinical evidence, disease characteristics (including rarity), budget impact, and a range of other factors on the recommendations of AWMSG and its subcommittee, the New Medicines Group (NMG). Multivariate analyses of 47 AWMSG appraisals between 2007-9 correctly predicted 87% of decisions. The results are suggestive of a positive influence on recommendations of the presence of probabilistic sensitivity analyses (PSAs) but, counter-intuitively, a statistically significant negative influence of evidence from high-quality randomized controlled trials (RCTs) [odds ratio 0.059; 95% CI 0.005, 0.699]. This latter observation may be attributed to our strict definition of high quality, which excluded the use of surrogate endpoints. Putative explanatory variables, including cost effectiveness, budget impact, underlying disease characteristics and 'ultra'-orphan drug status were not statistically significant predictors of final AWMSG decisions based on our dataset. Univariate analyses indicate that medicines with negative recommendations had significantly higher incremental cost-effectiveness ratios than those with positive recommendations, consistent with the pursuit of economic efficiency. There is also evidence that AWMSG considers equity issues via an ultra-orphan drugs policy. Consideration of decision uncertainty via PSA appears to positively influence the reimbursement decisions of AWMSG. The significant negative impact of the presence of high-quality RCTs, and the lack of a significant positive impact of other expected factors, may reflect issues in the plausibility of supporting evidence for medicines that received negative recommendations. Furthermore, it serves to emphasize the difficulties in applying the usual hierarchies of evidence to the HTA process, and in particular to the appraisal of high-cost specialist medicines close to market launch.

Meeting the milestones. Strategies for including high-value care education in pulmonary and critical care fellowship training.

PubMed

Courtright, Katherine R; Weinberger, Steven E; Wagner, Jason

2015-04-01

Physician decision making is partially responsible for the roughly 30% of U.S. healthcare expenditures that are wasted annually on low-value care. In response to both the widespread public demand for higher-quality care and the cost crisis, payers are transitioning toward value-based payment models whereby physicians are rewarded for high-value, cost-conscious care. Furthermore, to target physicians in training to practice with cost awareness, the Accreditation Council for Graduate Medical Education has created both individual objective milestones and institutional requirements to incorporate quality improvement and cost awareness into fellowship training. Subsequently, some professional medical societies have initiated high-value care educational campaigns, but the overwhelming majority target either medical students or residents in training. Currently, there are few resources available to help guide subspecialty fellowship programs to successfully design durable high-value care curricula. The resource-intensive nature of pulmonary and critical care medicine offers unique opportunities for the specialty to lead in modeling and teaching high-value care. To ensure that fellows graduate with the capability to practice high-value care, we recommend that fellowship programs focus on four major educational domains. These include fostering a value-based culture, providing a robust didactic experience, engaging trainees in process improvement projects, and encouraging scholarship. In doing so, pulmonary and critical care educators can strive to train future physicians who are prepared to provide care that is both high quality and informed by cost awareness.

The cost-effectiveness of quality improvement projects: a conceptual framework, checklist and online tool for considering the costs and consequences of implementation-based quality improvement.

PubMed

Thompson, Carl; Pulleyblank, Ryan; Parrott, Steve; Essex, Holly

2016-02-01

In resource constrained systems, decision makers should be concerned with the efficiency of implementing improvement techniques and technologies. Accordingly, they should consider both the costs and effectiveness of implementation as well as the cost-effectiveness of the innovation to be implemented. An approach to doing this effectively is encapsulated in the 'policy cost-effectiveness' approach. This paper outlines some of the theoretical and practical challenges to assessing policy cost-effectiveness (the cost-effectiveness of implementation projects). A checklist and associated (freely available) online application are also presented to help services develop more cost-effective implementation strategies. © 2015 John Wiley & Sons, Ltd.

High-throughput STR analysis for DNA database using direct PCR.

PubMed

Sim, Jeong Eun; Park, Su Jeong; Lee, Han Chul; Kim, Se-Yong; Kim, Jong Yeol; Lee, Seung Hwan

2013-07-01

Since the Korean criminal DNA database was launched in 2010, we have focused on establishing an automated DNA database profiling system that analyzes short tandem repeat loci in a high-throughput and cost-effective manner. We established a DNA database profiling system without DNA purification using a direct PCR buffer system. The quality of direct PCR procedures was compared with that of conventional PCR system under their respective optimized conditions. The results revealed not only perfect concordance but also an excellent PCR success rate, good electropherogram quality, and an optimal intra/inter-loci peak height ratio. In particular, the proportion of DNA extraction required due to direct PCR failure could be minimized to <3%. In conclusion, the newly developed direct PCR system can be adopted for automated DNA database profiling systems to replace or supplement conventional PCR system in a time- and cost-saving manner. © 2013 American Academy of Forensic Sciences Published 2013. This article is a U.S. Government work and is in the public domain in the U.S.A.

Pain, Itch, Quality of Life, and Costs after Herpes Zoster.

PubMed

van Wijck, Albert J M; Aerssens, Yannick R

2017-07-01

Herpes zoster (HZ) and postherpetic neuralgia are known to have a profound effect on the patient's quality of life, but the incidence and severity of itch and its relation with pain and quality of life in the long term are still relatively unknown. The aim of this study was to measure the presence and severity of pain and itch and impact on quality of life in patients over 50 years old with HZ. We enrolled 661 patients with HZ in this 12-month observational study. Patient data were collected via a web-based questionnaire. Outcomes were pain, itch, burden of illness, impact on patient's daily life, impact on quality of life, and healthcare costs. At inclusion, 94% of patients reported any pain, 74.3% significant pain, and 26% severe pain. After 3 months, 18.8% of patients suffered from postherpetic neuralgia. At inclusion, 70.8% of patients had any itch, 39.2% significant itch, and 7.3% severe itch. The occurrence of pain increases costs and has a high impact on the quality of life, lowering EQ-5D scores by an average of 18%. In contrast, itch has little effect on the quality of life. Pain and itch are highly prevalent months after HZ. Pain caused by HZ has a large impact on quality of life, burden of illness, impact on daily life, and health care costs for these patients. The impact of itch on quality of life is relatively small. © 2016 World Institute of Pain.

Low Cost and Energy Efficient Methods for the Manufacture of Semi-Solid (SSM) Feedstock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diran Apelian; Qingyue Pan; Makhlouf Makhlouf

2005-11-07

The SSM Consortium (now ACRC) at WPI has been carrying out fundamental, pre-competitive research in SSM for several years. Current and past research (at WPI) has generated many results of fundamental and applied nature, which are available to the SSM community. These include materials characterization, yield stress effects, alloy development, rheological properties, process modeling/simulation, semi-solid slurry formation, etc. Alternative method to produce SSM slurries at lower processing costs and with reduced energy consumption is a critical need. The production of low cost SSM feedstock will certainly lead to a dramatic increase in the tonnage of castings produced by SSM, andmore » will provide end users such as the transportation industry, with lighter, cheaper and high performance materials. In this program, the research team has addressed three critical issues in semi-solid processing. They are: (1) Development of low cost, reliable slurry-on-demand approaches for semi-solid processing; (2) Application of the novel permanent grain refining technology-SiBloy for the manufacture of high-quality SSM feedstock, and (3) Development of computational and modeling tools for semi-solid processing to enhance SSM process control. Salient results from these studies are summarized and detailed in our final technical report.« less

Incorporating High Value Care into Undergraduate Medical Education

ERIC Educational Resources Information Center

Faber, Erik; Wells, Daniel

2017-01-01

Identified Need: The United States spends the most per capita on healthcare, but ranks much lower than most industrialized nations in quality and many health metrics. Studies have shown higher costs do not translate to high quality care, and may indeed translate to lower quality care and patient experience. Teaching high value care (HVC) is only…

A novel 3D imaging system for strawberry phenotyping.

PubMed

He, Joe Q; Harrison, Richard J; Li, Bo

2017-01-01

Accurate and quantitative phenotypic data in plant breeding programmes is vital in breeding to assess the performance of genotypes and to make selections. Traditional strawberry phenotyping relies on the human eye to assess most external fruit quality attributes, which is time-consuming and subjective. 3D imaging is a promising high-throughput technique that allows multiple external fruit quality attributes to be measured simultaneously. A low cost multi-view stereo (MVS) imaging system was developed, which captured data from 360° around a target strawberry fruit. A 3D point cloud of the sample was derived and analysed with custom-developed software to estimate berry height, length, width, volume, calyx size, colour and achene number. Analysis of these traits in 100 fruits showed good concordance with manual assessment methods. This study demonstrates the feasibility of an MVS based 3D imaging system for the rapid and quantitative phenotyping of seven agronomically important external strawberry traits. With further improvement, this method could be applied in strawberry breeding programmes as a cost effective phenotyping technique.

Improving the baking quality of bread wheat by genomic selection in early generations.

PubMed

Michel, Sebastian; Kummer, Christian; Gallee, Martin; Hellinger, Jakob; Ametz, Christian; Akgöl, Batuhan; Epure, Doru; Güngör, Huseyin; Löschenberger, Franziska; Buerstmayr, Hermann

2018-02-01

Genomic selection shows great promise for pre-selecting lines with superior bread baking quality in early generations, 3 years ahead of labour-intensive, time-consuming, and costly quality analysis. The genetic improvement of baking quality is one of the grand challenges in wheat breeding as the assessment of the associated traits often involves time-consuming, labour-intensive, and costly testing forcing breeders to postpone sophisticated quality tests to the very last phases of variety development. The prospect of genomic selection for complex traits like grain yield has been shown in numerous studies, and might thus be also an interesting method to select for baking quality traits. Hence, we focused in this study on the accuracy of genomic selection for laborious and expensive to phenotype quality traits as well as its selection response in comparison with phenotypic selection. More than 400 genotyped wheat lines were, therefore, phenotyped for protein content, dough viscoelastic and mixing properties related to baking quality in multi-environment trials 2009-2016. The average prediction accuracy across three independent validation populations was r = 0.39 and could be increased to r = 0.47 by modelling major QTL as fixed effects as well as employing multi-trait prediction models, which resulted in an acceptable prediction accuracy for all dough rheological traits (r = 0.38-0.63). Genomic selection can furthermore be applied 2-3 years earlier than direct phenotypic selection, and the estimated selection response was nearly twice as high in comparison with indirect selection by protein content for baking quality related traits. This considerable advantage of genomic selection could accordingly support breeders in their selection decisions and aid in efficiently combining superior baking quality with grain yield in newly developed wheat varieties.

Cost-effective solutions for sewage treatment in developing countries--the case of Brazil.

PubMed

Jordão, E P; Volschan, I

2004-01-01

Cost-effective solutions are a must in developing countries, not only regarding investment costs, but also in respect to technology and operating practices. With these two goals in mind, in Brazil a particular effort has been directed for the development and application of the Chemical Enhanced Primary Treatment (CEPT) process and of the Upflow Anaerobic Sludge Blanket (UASB) process, both followed by complementary secondary treatment. Both technologies are under current expansion in Brazil. Large CEPT plants have been designed and built, up to 3.7 m3/s average design flow, as well as large UASB reactors, up to 3.0 m3/s average design flow. The applied technologies are cost-effective: they present low investment and efficiencies of BOD removal of up to 50% to 70%. They allow the plant construction in steps, an initial phase with efficiency over the usual primary treatment, and in order to achieve best effluent quality and meet legal water quality standards, a logic upgrade post-treatment can later on be implemented. The higher initial reduction of BOD and TSS also permits savings in construction and operational costs of secondary treatment, due to lower organic load and lower energy consumption. Sludge represents a particular point of attention: in the cases when the CEPT was used, Chemical Stabilisation of the Sludge (CSS) has also been practiced, eliminating the high construction costs of the digesters, all the plant staying chemically operated. In the cases when the UASB is used preceding secondary treatment, sludge can easily return to the anaerobic vessel, the costly sludge digestion unit being avoided. UASB reactors have practically no equipment in the anaerobic vessel, no energy consumption, low sludge production, and when applied in hot climates as in Brazil, heating devices are not required. The Brazilian experience, some particular cases, special comments on design and different secondary treatment processes are presented in this paper, as a contribution to the discussion of cost and benefits, a prime point to be considered.

The Use of Internet FAQs (Frequently Asked Questions) and Files as Cost-Effective Supplements to Textbooks and Substitutions for Photocopies.

ERIC Educational Resources Information Center

MacFarland, Thomas W.; Yates, Jan M.

Gaining access to current and high-quality curriculum resource materials has become more difficult due to escalation in the prices of textbooks and in rigid interpretations of copyright laws which limit photocopying. Internet Frequently Asked Questions (FAQs) and files may offer a partial solution. Originally developed for the benefit of Usenet…

Quantitative estimates of the impact of sensitivity and specificity in mammographic screening in Germany.

PubMed Central

Warmerdam, P G; de Koning, H J; Boer, R; Beemsterboer, P M; Dierks, M L; Swart, E; Robra, B P

1997-01-01

STUDY OBJECTIVE: To estimate quantitatively the impact of the quality of mammographic screening (in terms of sensitivity and specificity) on the effects and costs of nationwide breast cancer screening. DESIGN: Three plausible "quality" scenarios for a biennial breast cancer screening programme for women aged 50-69 in Germany were analysed in terms of costs and effects using the Microsimulation Screening Analysis model on breast cancer screening and the natural history of breast cancer. Firstly, sensitivity and specificity in the expected situation (or "baseline" scenario) were estimated from a model based analysis of empirical data from 35,000 screening examinations in two German pilot projects. In the second "high quality" scenario, these properties were based on the more favourable diagnostic results from breast cancer screening projects and the nationwide programme in The Netherlands. Thirdly, a worst case, "low quality" hypothetical scenario with a 25% lower sensitivity than that experienced in The Netherlands was analysed. SETTING: The epidemiological and social situation in Germany in relation to mass screening for breast cancer. RESULTS: In the "baseline" scenario, an 11% reduction in breast cancer mortality was expected in the total German female population, ie 2100 breast cancer deaths would be prevented per year. It was estimated that the "high quality" scenario, based on Dutch experience, would lead to the prevention of an additional 200 deaths per year and would also cut the number of false positive biopsy results by half. The cost per life year gained varied from Deutsche mark (DM) 15,000 on the "high quality" scenario to DM 21,000 in the "low quality" setting. CONCLUSIONS: Up to 20% of the total costs of a screening programme can be spent on quality improvement in order to achieve a substantially higher reduction in mortality and reduce undesirable side effects while retaining the same cost effectiveness ratio as that estimated from the German data. PMID:9196649

The Effects of Training Institution Practice Costs, Quality, and Other Characteristics on Future Practice

PubMed Central

Phillips, Robert L.; Petterson, Stephen M.; Bazemore, Andrew W.; Wingrove, Peter; Puffer, James C.

2017-01-01

PURPOSE Medicare beneficiary spending patterns reflect those of the 306 Hospital Referral Regions where physicians train, but whether this holds true for smaller areas or for quality is uncertain. This study assesses whether cost and quality imprinting can be detected within the 3,436 Hospital Service Areas (HSAs), 82.4 percent of which have only 1 teaching hospital, and whether sponsoring institution characteristics are associated. METHODS We conducted a secondary, multi-level, multivariable analysis of 2011 Medicare claims and American Medical Association Masterfile data for a random, nationally representative sample of family physicians and general internists who completed residency between 1992 and 2010 and had more than 40 Medicare patients (3,075 physicians providing care to 503,109 beneficiaries). Practice and training locations were matched with Dartmouth Atlas HSAs and categorized into low-, average-, and high-cost spending groups. Practice and training HSAs were assessed for differences in 4 diabetes quality measures. Institutional characteristics included training volume and percentage of graduates in rural practice and primary care. RESULTS The unadjusted, annual, per-beneficiary spending difference between physicians trained in high- and low-cost HSAs was $1,644 (95% CI, $1,253–$2,034), and the difference remained significant after controlling for patient and physician characteristics. No significant relationship was found for diabetes quality measures. General internists were significantly more likely than family physicians to train in high-cost HSAs. Institutions with more graduates in rural practice and primary care produced lower-spending physicians. CONCLUSIONS The “imprint” of training spending patterns on physicians is strong and enduring, without discernible quality effects, and, along with identified institutional features, supports measures and policy options for improved graduate medical education outcomes. PMID:28289113

Cost effectiveness of alternative imaging strategies for the diagnosis of small-bowel Crohn's disease.

PubMed

Levesque, Barrett G; Cipriano, Lauren E; Chang, Steven L; Lee, Keane K; Owens, Douglas K; Garber, Alan M

2010-03-01

The cost effectiveness of alternative approaches to the diagnosis of small-bowel Crohn's disease is unknown. This study evaluates whether computed tomographic enterography (CTE) is a cost-effective alternative to small-bowel follow-through (SBFT) and whether capsule endoscopy is a cost-effective third test in patients in whom a high suspicion of disease remains after 2 previous negative tests. A decision-analytic model was developed to compare the lifetime costs and benefits of each diagnostic strategy. Patients were considered with low (20%) and high (75%) pretest probability of small-bowel Crohn's disease. Effectiveness was measured in quality-adjusted life-years (QALYs) gained. Parameter assumptions were tested with sensitivity analyses. With a moderate to high pretest probability of small-bowel Crohn's disease, and a higher likelihood of isolated jejunal disease, follow-up evaluation with CTE has an incremental cost-effectiveness ratio of less than $54,000/QALY-gained compared with SBFT. The addition of capsule endoscopy after ileocolonoscopy and negative CTE or SBFT costs greater than $500,000 per QALY-gained in all scenarios. Results were not sensitive to costs of tests or complications but were sensitive to test accuracies. The cost effectiveness of strategies depends critically on the pretest probability of Crohn's disease and if the terminal ileum is examined at ileocolonoscopy. CTE is a cost-effective alternative to SBFT in patients with moderate to high suspicion of small-bowel Crohn's disease. The addition of capsule endoscopy as a third test is not a cost-effective third test, even in patients with high pretest probability of disease. Copyright 2010 AGA Institute. Published by Elsevier Inc. All rights reserved.

Development of Miniaturized Optimized Smart Sensors (MOSS) for space plasmas

NASA Technical Reports Server (NTRS)

Young, D. T.

1993-01-01

The cost of space plasma sensors is high for several reasons: (1) Most are one-of-a-kind and state-of-the-art, (2) the cost of launch to orbit is high, (3) ruggedness and reliability requirements lead to costly development and test programs, and (4) overhead is added by overly elaborate or generalized spacecraft interface requirements. Possible approaches to reducing costs include development of small 'sensors' (defined as including all necessary optics, detectors, and related electronics) that will ultimately lead to cheaper missions by reducing (2), improving (3), and, through work with spacecraft designers, reducing (4). Despite this logical approach, there is no guarantee that smaller sensors are necessarily either better or cheaper. We have previously advocated applying analytical 'quality factors' to plasma sensors (and spacecraft) and have begun to develop miniaturized particle optical systems by applying quantitative optimization criteria. We are currently designing a Miniaturized Optimized Smart Sensor (MOSS) in which miniaturized electronics (e.g., employing new power supply topology and extensive us of gate arrays and hybrid circuits) are fully integrated with newly developed particle optics to give significant savings in volume and mass. The goal of the SwRI MOSS program is development of a fully self-contained and functional plasma sensor weighing 1 lb and requiring 1 W. MOSS will require only a typical spacecraft DC power source (e.g., 30 V) and command/data interfaces in order to be fully functional, and will provide measurement capabilities comparable in most ways to current sensors.

The administrative and clinical rationale for the total organization approach to continuous quality improvement.

PubMed

Jones, D J; Ziegenfuss, J T

1993-01-01

In our view TQM and CQI represent important innovations in the continuing effort to develop higher performance organizations. Never before has the need been so great to improve quality while at the same time constraining, or reducing, costs. An increasing number of health care organizations can document their experiences that as quality goes up, costs can come down. The contribution of these new approaches is in some sense the wedding of many long established methodologies--the scientific method, statistical quality control, planning, joint problem solving, participative management, and empowerment of the work force. While this recognition could lend support to those who label this new model a fad, that perception denies the linkage of TQM/CQI to the greater stream of innovations pushing us toward ever-greater organizational excellence. Can we not take the philosophy and methods that are potentially useful and try them experimentally? Let our empirical tests tell us of their contribution. We believe the concepts and procedures of TQM/CQI will help us to be better in years to come, even though we highly respect our starting point.

Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova

PubMed Central

2014-01-01

Background Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Methods Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Results Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. Conclusions The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result suggest that, together the three SRH components (STI, early pregnancy and contraception, and HIV) are potentially cost saving. High cost savings resulting from averted lifetime treatment cost of HIV infected persons are likely to off-set the costs of STIs and unwanted pregnancies. PMID:25047074

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

NASA Astrophysics Data System (ADS)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily available gas-quenching, whereas the other new grade enables a faster manufacturing of the tool at reduced cost by eliminating the time and money consuming high temperature hardening altogether. The latter newly developed grade can be hardened from a soft delivery state for easy machining to 52 HRc by way of a simple low temperature precipitation hardening. In this work, these new grades and the role of the tool material’s thermal, mechanical and tribological properties as well as their processing features will be discussed in light of enabling the manufacture of intelligent hot stamping tools.

Health services research in urology.

PubMed

Yu, Hua-Yin; Ulmer, William; Kowalczyk, Keith J; Hu, Jim C

2011-06-01

Health services research (HSR) is increasingly important given the focus on patient-centered, cost-effective, high-quality health care. We examine how HSR affects contemporary evidence-based urologic practice and its role in shaping future urologic research and care. PubMed, urologic texts, and lay literature were reviewed for terms pertaining to HSR/outcomes research and urologic disease processes. HSR is a broad discipline that focuses on access, cost, and outcomes of Health care. Its use has been applied to a myriad of urologic conditions to identify deficiencies in access, to evaluate cost-effectiveness of therapies, and to evaluate structural, process, and outcome quality measures. HSR utilizes an evidence-based approach to identify the most effective ways to organize/manage, finance, and deliver high-quality urologic care and to tailor care optimized to individuals.

A Microeconomic Approach to the Issue of Quality in the Teaching Force.

ERIC Educational Resources Information Center

Kim, Hye-Sook

This study approaches the issue of quality in the teaching force using a microeconomic framework that applies the concept of "opportunity cost." As teaching is a low-paid profession, accepting a teaching position may be associated with high opportunity costs (foregone benefits) for more academically talented college students because they could…

Make or buy decision model with multi-stage manufacturing process and supplier imperfect quality

NASA Astrophysics Data System (ADS)

Pratama, Mega Aria; Rosyidi, Cucuk Nur

2017-11-01

This research develops an make or buy decision model considering supplier imperfect quality. This model can be used to help companies make the right decision in case of make or buy component with the best quality and the least cost in multistage manufacturing process. The imperfect quality is one of the cost component that must be minimizing in this model. Component with imperfect quality, not necessarily defective. It still can be rework and used for assembly. This research also provide a numerical example and sensitivity analysis to show how the model work. We use simulation and help by crystal ball to solve the numerical problem. The sensitivity analysis result show that percentage of imperfect generally not affect to the model significantly, and the model is not sensitive to changes in these parameters. This is because the imperfect cost are smaller than overall total cost components.

Aerodynamic and engineering design of a 1.5 s high quality microgravity drop tower facility

NASA Astrophysics Data System (ADS)

Belser, Valentin; Breuninger, Jakob; Reilly, Matthew; Laufer, René; Dropmann, Michael; Herdrich, Georg; Hyde, Truell; Röser, Hans-Peter; Fasoulas, Stefanos

2016-12-01

Microgravity experiments are essential for research in space science, biology, fluid mechanics, combustion, and material sciences. One way to conduct microgravity experiments on Earth is by using drop tower facilities. These facilities combine a high quality of microgravity, adequate payload masses and have the advantage of virtually unlimited repeatability under same experimental conditions, at a low cost. In a collaboration between the Institute of Space Systems (IRS) at the University of Stuttgart and Baylor University (BU) in Waco, Texas, a new drop tower is currently under development at the Center for Astrophysics, Space Physics and Engineering Research (CASPER). The design parameters of the drop tower ask for at least 1.5 s in free fall duration while providing a quality of at least 10-5 g. Previously, this quality has only been achieved in vacuum drop tower facilities where the capsule experiences virtually zero aerodynamic drag during its free fall. Since this design comes at high costs, a different drop tower design concept, which does not require an evacuated drop shaft, was chosen. It features a dual-capsule system in which the experiment capsule is shielded from aerodynamic forces by surrounding it with a drag shield during the drop. As no other dual-capsule drop tower has been able to achieve a quality as good as or better than 10-5 g previous work optimized the design with an aerodynamic perspective by using computational fluid dynamics (CFD) simulations to determine the ideal shape and size of the outer capsule and to specify the aerodynamically crucial dimensions for the overall system. Experiments later demonstrated that the required quality of microgravity can be met with the proposed design. The main focus of this paper is the mechanical realization of the capsule as well as the development and layout of the surrounding components, such as the release mechanism, the deceleration device and the drop shaft. Because the drop tower facility is a complex system with many interdependencies between all of the components, several engineering challenges had to be addressed. For example, initial disturbances that are caused by the release mechanism are a common issue that arises at drop tower facilities. These vibrations may decrease the quality of microgravity during the initial segment of free fall. Because this would reduce the free fall time experiencing high quality microgravity, a mechanism has been developed to provide a soft release. Challenges and proposed solutions for all components are highlighted in this paper.

Lighting Systems For High Speed Photography Applying Special Metal Halide Discharge Lamps

NASA Astrophysics Data System (ADS)

Gillum, Keith M.; Steuernagel, K. H.

1983-03-01

High speed photography requires, in addition to a good color quality of the light source, a very high level of illumination. Conventional lighting systems utilizing incandescent lamps or other metal halide lamp types has inherent problems of inefficient light output or poor color quality. Heat generated by incandescent lamps and the power these sources require drive up operating and installation costs. A most economical and practical solution was devised by using the metal halide discharge lamp developed by OSRAM, GmbH of Munich, West Germany. This lamp trade marked the HMITM Metallogen was primarily developed for the needs of the television and motion picture film industry. Due to their high efficiency and other consistent operating qualities these lamps also fulfill the needs of high speed photography, e.g. in crash test facilities, when special engineering activities are carried out. The OSRAM HMITM lamp is an AC discharge metal halide lamp with rare earth additives to increase both the efficiency and light output qualities. Since the lamp is an AC source, a special method had to be developed to overcome the strobing effect, which is normal for AC lamps given their modulated light output, when used with high speed cameras, (e.g. with >1000 fps). This method is based on an increased frequency for the lamp supply voltage coupled with a mix of the light output achieved using a multiphase mains power supply. First developed in 1977, this system using the OSRAM HMITM lamps was installed in a crash test facility of a major automotive manufacturer in West Germany. The design resulted in the best lighting and performance ever experienced. Since that time several other motor companies have made use of this breakthrough. Industrial and scientific users are now considering additional applications use of this advanced high speed lighting system.

Increasing quality and managing complexity in neuroinformatics software development with continuous integration.

PubMed

Zaytsev, Yury V; Morrison, Abigail

2012-01-01

High quality neuroscience research requires accurate, reliable and well maintained neuroinformatics applications. As software projects become larger, offering more functionality and developing a denser web of interdependence between their component parts, we need more sophisticated methods to manage their complexity. If complexity is allowed to get out of hand, either the quality of the software or the speed of development suffer, and in many cases both. To address this issue, here we develop a scalable, low-cost and open source solution for continuous integration (CI), a technique which ensures the quality of changes to the code base during the development procedure, rather than relying on a pre-release integration phase. We demonstrate that a CI-based workflow, due to rapid feedback about code integration problems and tracking of code health measures, enabled substantial increases in productivity for a major neuroinformatics project and additional benefits for three further projects. Beyond the scope of the current study, we identify multiple areas in which CI can be employed to further increase the quality of neuroinformatics projects by improving development practices and incorporating appropriate development tools. Finally, we discuss what measures can be taken to lower the barrier for developers of neuroinformatics applications to adopt this useful technique.

Increasing quality and managing complexity in neuroinformatics software development with continuous integration

PubMed Central

Zaytsev, Yury V.; Morrison, Abigail

2013-01-01

High quality neuroscience research requires accurate, reliable and well maintained neuroinformatics applications. As software projects become larger, offering more functionality and developing a denser web of interdependence between their component parts, we need more sophisticated methods to manage their complexity. If complexity is allowed to get out of hand, either the quality of the software or the speed of development suffer, and in many cases both. To address this issue, here we develop a scalable, low-cost and open source solution for continuous integration (CI), a technique which ensures the quality of changes to the code base during the development procedure, rather than relying on a pre-release integration phase. We demonstrate that a CI-based workflow, due to rapid feedback about code integration problems and tracking of code health measures, enabled substantial increases in productivity for a major neuroinformatics project and additional benefits for three further projects. Beyond the scope of the current study, we identify multiple areas in which CI can be employed to further increase the quality of neuroinformatics projects by improving development practices and incorporating appropriate development tools. Finally, we discuss what measures can be taken to lower the barrier for developers of neuroinformatics applications to adopt this useful technique. PMID:23316158

Cost accounting in radiation oncology: a computer-based model for reimbursement.

PubMed

Perez, C A; Kobeissi, B; Smith, B D; Fox, S; Grigsby, P W; Purdy, J A; Procter, H D; Wasserman, T H

1993-04-02

The skyrocketing cost of medical care in the United States has resulted in multiple efforts in cost containment. The present work offers a rational computer-based cost accounting approach to determine the actual use of resources in providing a specific service in a radiation oncology center. A procedure-level cost accounting system was developed by using recorded information on actual time and effort spent by individual staff members performing various radiation oncology procedures, and analyzing direct and indirect costs related to staffing (labor), facilities and equipment, supplies, etc. Expenditures were classified as direct or indirect and fixed or variable. A relative value unit was generated to allocate specific cost factors to each procedure. Different costs per procedure were identified according to complexity. Whereas there was no significant difference in the treatment time between low-energy (4 and 6 MV) or high-energy (18 MV) accelerators, there were significantly higher costs identified in the operation of a high-energy linear accelerator, a reflection of initial equipment investment, quality assurance and calibration procedures, maintenance costs, service contract, and replacement parts. Utilization of resources was related to the complexity of the procedures performed and whether the treatments were delivered to inpatients or outpatients. In analyzing time motion for physicians and other staff, it was apparent that a greater effort must be made to train the staff to accurately record all times involved in a given procedure, and it is strongly recommended that each institution perform its own time motion studies to more accurately determine operating costs. Sixty-six percent of our facility's global costs were for labor, 20% for other operating expenses, 10% for space, and 4% for equipment. Significant differences were noted in the cost allocation for professional or technical functions, as labor, space, and equipment costs are higher in the latter. External beam treatment-related procedures accounted for more than 50% of all technical and professional revenues, simulation for 8% to 10%, and other physics/dosimetry procedures for 11% to 14% of revenues. Some discrepancies were identified between the actual cost and level of reimbursement of various procedures. Details are described in the manuscript. It is imperative to develop an equitable reimbursement system for radiation oncology services, based on cost accounting and other measures that may enhance productivity and reduce the cost per procedure unit, while at the same time preserving the highest quality of service provided to patients.

Chiropractic quality assurance: standards and guidelines

PubMed Central

Gatterman, Meridel I; Dobson, Thomas P; LeFevbre, Ron

2001-01-01

Chiropractic quality assurance involves development of both clinical guidelines and standards. Confusion generated by poor differentiation of guidelines from standards contributes to mistrust of the guideline development process. Guidelines are considered to be recommendations that allow for flexibility and individual patient differences. Standards are more binding and require a high level of supporting evidence. While guidelines serve as educational tools to improve the quality of practice, standards that outline minimum competency are used more as administrative tools on which to base policy. Barriers to development of clinical guidelines and standards include fear that they will create prescriptive “cookbook” practice, and the distrust that guidelines are developed primarily for cost containment. Clinicians also criticize guidelines developed by academics that don't relate to practice, and those based on evidence that lacks clinical relevance. Conflicting guidelines perceived to be based on strong bias or conflict of interest are also suspect. To reduce barriers to acceptance and implementation, guidelines should be inclusive, patient-centered, and based on a variety of evidence and clinical experience.

Athermal design and analysis of glass-plastic hybrid lens

NASA Astrophysics Data System (ADS)

Yang, Jian; Cen, Zhaofeng; Li, Xiaotong

2018-01-01

With the rapid development of security market, the glass-plastic hybrid lens has gradually become a choice for the special requirements like high imaging quality in a wide temperature range and low cost. The reduction of spherical aberration is achieved by using aspherical surface instead of increasing the number of lenses. Obviously, plastic aspherical lens plays a great role in the cost reduction. However, the hybrid lens has a priority issue, which is the large thermal coefficient of expansion of plastic, causing focus shift and seriously affecting the imaging quality, so the hybrid lens is highly sensitive to the change of temperature. To ensure the system operates normally in a wide temperature range, it is necessary to eliminate the influence of temperature on the hybrid lens system. A practical design method named the Athermal Material Map is summarized and verified by an athermal design example according to the design index. It includes the distribution of optical power and selection of glass or plastic. The design result shows that the optical system has excellent imaging quality at a wide temperature range from -20 ° to 70 °. The method of athermal design in this paper has generality which could apply to optical system with plastic aspherical surface.

Practicing Surgeons Lead in Quality Care, Safety, and Cost Control

PubMed Central

Shively, Eugene H.; Heine, Michael J.; Schell, Robert H.; Sharpe, J Neal; Garrison, R Neal; Vallance, Steven R.; DeSimone, Kenneth J.S.; Polk, Hiram C.

2004-01-01

Objective: To report the experiences of 66 surgical specialists from 15 different hospitals who performed 43 CPT-based procedures more than 16,000 times. Summary Background Data: Surgeons are under increasing pressure to demonstrate patient safety data as quantitated by objective and subjective outcomes that meet or exceed the standards of benchmark institutions or databases. Methods: Data from 66 surgical specialists on 43 CPT-based procedures were accessioned over a 4-year period. The hospitals vary from a small 30-bed hospital to large teaching hospitals. All reported deaths and complications were verified from hospital and office records and compared with benchmarks. Results: Over a 4-year inclusive period (1999–2002), 16,028 elective operations were accessioned. There was a total 1.4% complication rate and 0.05% death rate. A system has been developed for tracking outcomes. A wide range of improvements have been identified. These include the following: 1) improved classification of indications for systemic prophylactic antibiotic use and reduction in the variety of drugs used, 2) shortened length of stay for standard procedures in different surgical specialties, 3) adherence to strict indicators for selected operative procedures, 4) less use of costly diagnostic procedures, 5) decreased use of expensive home health services, 6) decreased use of very expensive drugs, 7) identification of the unnecessary expense of disposable laparoscopic devices, 8) development of a method to compare a one-surgeon hospital with his peers, and 9) development of unique protocols for interaction of anesthesia and surgery. The system also provides a very good basis for confirmation of patient safety and improvement therein. Conclusions: Since 1998, Quality Surgical Solutions, PLLC, has developed simple physician-authored protocols for delivering high-quality and cost-effective surgery that measure up to benchmark institutions. We have discovered wide areas for improvements in surgery by adherence to simple protocols, minimizing death and complications and clarifying cost issues. PMID:15166954

Construction of a high-density genetic map for grape using next generation restriction-site associated DNA sequencing

PubMed Central

2012-01-01

Background Genetic mapping and QTL detection are powerful methodologies in plant improvement and breeding. Construction of a high-density and high-quality genetic map would be of great benefit in the production of superior grapes to meet human demand. High throughput and low cost of the recently developed next generation sequencing (NGS) technology have resulted in its wide application in genome research. Sequencing restriction-site associated DNA (RAD) might be an efficient strategy to simplify genotyping. Combining NGS with RAD has proven to be powerful for single nucleotide polymorphism (SNP) marker development. Results An F1 population of 100 individual plants was developed. In-silico digestion-site prediction was used to select an appropriate restriction enzyme for construction of a RAD sequencing library. Next generation RAD sequencing was applied to genotype the F1 population and its parents. Applying a cluster strategy for SNP modulation, a total of 1,814 high-quality SNP markers were developed: 1,121 of these were mapped to the female genetic map, 759 to the male map, and 1,646 to the integrated map. A comparison of the genetic maps to the published Vitis vinifera genome revealed both conservation and variations. Conclusions The applicability of next generation RAD sequencing for genotyping a grape F1 population was demonstrated, leading to the successful development of a genetic map with high density and quality using our designed SNP markers. Detailed analysis revealed that this newly developed genetic map can be used for a variety of genome investigations, such as QTL detection, sequence assembly and genome comparison. PMID:22908993

Societal costs of underage drinking.

PubMed

Miller, Ted R; Levy, David T; Spicer, Rebecca S; Taylor, Dexter M

2006-07-01

Despite minimum-purchase-age laws, young people regularly drink alcohol. This study estimated the magnitude and costs of problems resulting from underage drinking by category-traffic crashes, violence, property crime, suicide, burns, drownings, fetal alcohol syndrome, high-risk sex, poisonings, psychoses, and dependency treatment-and compared those costs with associated alcohol sales. Previous studies did not break out costs of alcohol problems by age. For each category of alcohol-related problems, we estimated fatal and nonfatal cases attributable to underage alcohol use. We multiplied alcohol-attributable cases by estimated costs per case to obtain total costs for each problem. Underage drinking accounted for at least 16% of alcohol sales in 2001. It led to 3,170 deaths and 2.6 million other harmful events. The estimated $61.9 billion bill (relative SE = 18.5%) included $5.4 billion in medical costs, $14.9 billion in work loss and other resource costs, and $41.6 billion in lost quality of life. Quality-of-life costs, which accounted for 67% of total costs, required challenging indirect measurement. Alcohol-attributable violence and traffic crashes dominated the costs. Leaving aside quality of life, the societal harm of $1 per drink consumed by an underage drinker exceeded the average purchase price of $0.90 or the associated $0.10 in tax revenues. Recent attention has focused on problems resulting from youth use of illicit drugs and tobacco. In light of the associated substantial injuries, deaths, and high costs to society, youth drinking behaviors merit the same kind of serious attention.

Economic evaluation of Varicella vaccination: results of a systematic review

PubMed Central

Unim, Brigid; Saulle, Rosella; Boccalini, Sara; Taddei, Cristina; Ceccherini, Vega; Boccia, Antonio; Bonanni, Paolo; La Torre, Giuseppe

2013-01-01

Introduction: The aim of the present study is to review the economic burden of varicella disease and the benefit of universal varicella vaccination in different settings pending its implementation in all Italian regions. Materials and Methods: Research was conducted using PubMed, Scopus and ISI databases. Score quality and data extraction were performed for all included studies. Results: Twenty-three articles met the criteria: 15 cost-effectiveness, 8 cost-benefit and one cost-utility analysis. Varicella vaccination could save the society from €637,762 (infant strategy) to 53 million annually (combined infant and adolescent strategy). The median and the mean quality scores resulted in 91.8% and 85.4% respectively; 11 studies were considered of high quality and 12 of low quality. Discussion: The studies are favorable to the introduction of universal varicella vaccination in Italy, being cost saving and having a positive impact on morbidity. The quality score of the studies varied greatly: recent analyses were of comparable quality to older studies. PMID:23823940

Controlling high-throughput manufacturing at the nano-scale

NASA Astrophysics Data System (ADS)

Cooper, Khershed P.

2013-09-01

Interest in nano-scale manufacturing research and development is growing. The reason is to accelerate the translation of discoveries and inventions of nanoscience and nanotechnology into products that would benefit industry, economy and society. Ongoing research in nanomanufacturing is focused primarily on developing novel nanofabrication techniques for a variety of applications—materials, energy, electronics, photonics, biomedical, etc. Our goal is to foster the development of high-throughput methods of fabricating nano-enabled products. Large-area parallel processing and highspeed continuous processing are high-throughput means for mass production. An example of large-area processing is step-and-repeat nanoimprinting, by which nanostructures are reproduced again and again over a large area, such as a 12 in wafer. Roll-to-roll processing is an example of continuous processing, by which it is possible to print and imprint multi-level nanostructures and nanodevices on a moving flexible substrate. The big pay-off is high-volume production and low unit cost. However, the anticipated cost benefits can only be realized if the increased production rate is accompanied by high yields of high quality products. To ensure product quality, we need to design and construct manufacturing systems such that the processes can be closely monitored and controlled. One approach is to bring cyber-physical systems (CPS) concepts to nanomanufacturing. CPS involves the control of a physical system such as manufacturing through modeling, computation, communication and control. Such a closely coupled system will involve in-situ metrology and closed-loop control of the physical processes guided by physics-based models and driven by appropriate instrumentation, sensing and actuation. This paper will discuss these ideas in the context of controlling high-throughput manufacturing at the nano-scale.

Preparing for budget-based payment methodologies: global payment and episode-based payment.

PubMed

Hudson, Mark E

2015-10-01

Use of budget-based payment methodologies (capitation and episode-based bundled payment) has been demonstrated to drive value in healthcare delivery. With a focus on high-volume, high-cost surgical procedures, inclusion of anaesthesiology services in these methodologies is likely. This review provides a summary of budget-based payment methodologies and practical information necessary for anaesthesiologists to prepare for participation in these programmes. Although few examples of anaesthesiologists' participation in these models exist, an understanding of the structure of these programmes and opportunities for participation are available. Prospective preparation in developing anaesthesiology-specific bundled payment profiles and early participation in pathway development associated with selected episodes of care are essential for successful participation as a gainsharing partner. With significant opportunity to contribute to care coordination and cost management, anaesthesiology can play an important role in budget-based payment programmes and should expect to participate as full gainsharing partners. Precise costing methodologies and accurate economic modelling, along with identification of quality management and cost control opportunities, will help identify participation opportunities and appropriate payment and gainsharing agreements. Anaesthesiology-specific examples with budget-based payment models are needed to help guide increased participation in these programmes.

The Implications of Handling Qualities in Civil Helicopter Accidents Involving Hover and Low Speed Flight

NASA Technical Reports Server (NTRS)

Dugan, Daniel C.; Delamer, Kevin J.

2005-01-01

Because of increasing accident rates in Army helicopters in hover and low speed flight, a study was made in 1999 of accidents which could be attributed to inadequate stability augmentation. A study of civil helicopter accidents from 1993-2004 was then undertaken to pursue the issue of poor handling qualities in helicopters which, in almost all cases, had no stability augmentation. The vast majority of the mishaps studied occurred during daylight in visual meteorological condition, reducing the impact of degraded visual environments (DVE) on the results. Based on the Cooper-Harper Rating Scale, the handling qualities of many of the helicopters studied could be described as having from "very objectionable" to "major" deficiencies. These costly deficiencies have resulted in unnecessary loss of life, injury, and high dollar damage. Low cost and lightweight augmentation systems for helicopters have been developed in the past and are still being investigated. They offer the potential for significant reductions in the accident rate.

Temperature and Humidity Calibration of a Low-Cost Wireless Dust Sensor for Real-Time Monitoring.

PubMed

Hojaiji, Hannaneh; Kalantarian, Haik; Bui, Alex A T; King, Christine E; Sarrafzadeh, Majid

2017-03-01

This paper introduces the design, calibration, and validation of a low-cost portable sensor for the real-time measurement of dust particles within the environment. The proposed design consists of low hardware cost and calibration based on temperature and humidity sensing to achieve accurate processing of airborne dust density. Using commercial particulate matter sensors, a highly accurate air quality monitoring sensor was designed and calibrated using real world variations in humidity and temperature for indoor and outdoor applications. Furthermore, to provide a low-cost secure solution for real-time data transfer and monitoring, an onboard Bluetooth module with AES data encryption protocol was implemented. The wireless sensor was tested against a Dylos DC1100 Pro Air Quality Monitor, as well as an Alphasense OPC-N2 optical air quality monitoring sensor for accuracy. The sensor was also tested for reliability by comparing the sensor to an exact copy of itself under indoor and outdoor conditions. It was found that accurate measurements under real-world humid and temperature varying and dynamically changing conditions were achievable using the proposed sensor when compared to the commercially available sensors. In addition to accurate and reliable sensing, this sensor was designed to be wearable and perform real-time data collection and transmission, making it easy to collect and analyze data for air quality monitoring and real-time feedback in remote health monitoring applications. Thus, the proposed device achieves high quality measurements at lower-cost solutions than commercially available wireless sensors for air quality.

Strategies for Sustainable Cancer Care.

PubMed

Kerr, David J; Jani, Anant; Gray, Sir Muir

2016-01-01

There is an increasing focus on the relative cost-effectiveness and sustainability of delivering high-quality cancer care, with most emphasis, debatably, given to cost control of innovative treatments. It is difficult to calculate all the direct and indirect contributors to the total cost of cancer treatment, but it is estimated that cancer drugs constitute 10% to 30% of the total cost of cancer care. A 2007 study in France showed the contribution of drug costs was less than 20%, with approximately 70% of the total expenditure on cancer accounted for by health care resource use, such as hospitalization. The U.K. government established the National Institute for Health and Care Excellence (NICE)-the dominant function of which is technology appraisal-to assess the clinical and cost-effectiveness of new pharmaceutical and biopharmaceutical products. This is to ensure that all National Health Service (NHS) patients have equitable access to the most clinically effective and cost-effective treatments that are viable. NICE has developed a transparent, public process to judge incremental cost-effectiveness using the quality-adjusted life year (QALY), which allows comparisons of cost-effectiveness across medical specialties. NICE has been both lauded and criticized-especially when it passes judgment on marginally effective but expensive anticancer drugs-but it provides a route to "rational rationing" and, therefore, may contribute to sustainable cancer care by highlighting the issue of affordable medicine. This implies a challenge to the wider oncology community as to how we might cooperate to introduce the concept of value-driven cancer care.

Software IV and V Research Priorities and Applied Program Accomplishments Within NASA

NASA Technical Reports Server (NTRS)

Blazy, Louis J.

2000-01-01

The mission of this research is to be world-class creators and facilitators of innovative, intelligent, high performance, reliable information technologies that enable NASA missions to (1) increase software safety and quality through error avoidance, early detection and resolution of errors, by utilizing and applying empirically based software engineering best practices; (2) ensure customer software risks are identified and/or that requirements are met and/or exceeded; (3) research, develop, apply, verify, and publish software technologies for competitive advantage and the advancement of science; and (4) facilitate the transfer of science and engineering data, methods, and practices to NASA, educational institutions, state agencies, and commercial organizations. The goals are to become a national Center Of Excellence (COE) in software and system independent verification and validation, and to become an international leading force in the field of software engineering for improving the safety, quality, reliability, and cost performance of software systems. This project addresses the following problems: Ensure safety of NASA missions, ensure requirements are met, minimize programmatic and technological risks of software development and operations, improve software quality, reduce costs and time to delivery, and improve the science of software engineering

Cure Cycle Optimization of Rapidly Cured Out-Of-Autoclave Composites.

PubMed

Dong, Anqi; Zhao, Yan; Zhao, Xinqing; Yu, Qiyong

2018-03-13

Out-of-autoclave prepreg typically needs a long cure cycle to guarantee good properties as the result of low processing pressure applied. It is essential to reduce the manufacturing time, achieve real cost reduction, and take full advantage of out-of-autoclave process. The focus of this paper is to reduce the cure cycle time and production cost while maintaining high laminate quality. A rapidly cured out-of-autoclave resin and relative prepreg were independently developed. To determine a suitable rapid cure procedure for the developed prepreg, the effect of heating rate, initial cure temperature, dwelling time, and post-cure time on the final laminate quality were evaluated and the factors were then optimized. As a result, a rapid cure procedure was determined. The results showed that the resin infiltration could be completed at the end of the initial cure stage and no obvious void could be seen in the laminate at this time. The laminate could achieve good internal quality using the optimized cure procedure. The mechanical test results showed that the laminates had a fiber volume fraction of 59-60% with a final glass transition temperature of 205 °C and excellent mechanical strength especially the flexural properties.

Cure Cycle Optimization of Rapidly Cured Out-Of-Autoclave Composites

PubMed Central

Dong, Anqi; Zhao, Yan; Zhao, Xinqing; Yu, Qiyong

2018-01-01

Out-of-autoclave prepreg typically needs a long cure cycle to guarantee good properties as the result of low processing pressure applied. It is essential to reduce the manufacturing time, achieve real cost reduction, and take full advantage of out-of-autoclave process. The focus of this paper is to reduce the cure cycle time and production cost while maintaining high laminate quality. A rapidly cured out-of-autoclave resin and relative prepreg were independently developed. To determine a suitable rapid cure procedure for the developed prepreg, the effect of heating rate, initial cure temperature, dwelling time, and post-cure time on the final laminate quality were evaluated and the factors were then optimized. As a result, a rapid cure procedure was determined. The results showed that the resin infiltration could be completed at the end of the initial cure stage and no obvious void could be seen in the laminate at this time. The laminate could achieve good internal quality using the optimized cure procedure. The mechanical test results showed that the laminates had a fiber volume fraction of 59–60% with a final glass transition temperature of 205 °C and excellent mechanical strength especially the flexural properties. PMID:29534048

Process-based costing.

PubMed

Lee, Robert H; Bott, Marjorie J; Forbes, Sarah; Redford, Linda; Swagerty, Daniel L; Taunton, Roma Lee

2003-01-01

Understanding how quality improvement affects costs is important. Unfortunately, low-cost, reliable ways of measuring direct costs are scarce. This article builds on the principles of process improvement to develop a costing strategy that meets both criteria. Process-based costing has 4 steps: developing a flowchart, estimating resource use, valuing resources, and calculating direct costs. To illustrate the technique, this article uses it to cost the care planning process in 3 long-term care facilities. We conclude that process-based costing is easy to implement; generates reliable, valid data; and allows nursing managers to assess the costs of new or modified processes.

Wastewater Reuse for Agriculture: Development of a Regional Water Reuse Decision-Support Model (RWRM) for Cost-Effective Irrigation Sources.

PubMed

Tran, Quynh K; Schwabe, Kurt A; Jassby, David

2016-09-06

Water scarcity has become a critical problem in many semiarid and arid regions. The single largest water use in such regions is for crop irrigation, which typically relies on groundwater and surface water sources. With increasing stress on these traditional water sources, it is important to consider alternative irrigation sources for areas with limited freshwater resources. One potential irrigation water resource is treated wastewater for agricultural fields located near urban centers. In addition, treated wastewater can contribute an appreciable amount of necessary nutrients for plants. The suitability of reclaimed water for specific applications depends on water quality and usage requirements. The main factors that determine the suitability of recycled water for agricultural irrigation are salinity, heavy metals, and pathogens, which cause adverse effects on human, plants, and soils. In this paper, we develop a regional water reuse decision-support model (RWRM) using the general algebraic modeling system to analyze the cost-effectiveness of alternative treatment trains to generate irrigation water from reclaimed wastewater, with the irrigation water designed to meet crop requirements as well as California's wastewater reuse regulations (Title 22). Using a cost-minimization framework, least-cost solutions consisting of treatment processes and their intensities (blending ratios) are identified to produce alternative irrigation sources for citrus and turfgrass. Our analysis illustrates the benefits of employing an optimization framework and flexible treatment design to identify cost-effective blending opportunities that may produce high-quality irrigation water for a wide range of end uses.

Drug innovation, price controls, and parallel trade.

PubMed

Matteucci, Giorgio; Reverberi, Pierfrancesco

2016-12-21

We study the long-run welfare effects of parallel trade (PT) in pharmaceuticals. We develop a two-country model of PT with endogenous quality, where the pharmaceutical firm negotiates the price of the drug with the government in the foreign country. We show that, even though the foreign government does not consider global R&D costs, (the threat of) PT improves the quality of the drug as long as the foreign consumers' valuation of quality is high enough. We find that the firm's short-run profit may be higher when PT is allowed. Nonetheless, this is neither necessary nor sufficient for improving drug quality in the long run. We also show that improving drug quality is a sufficient condition for PT to increase global welfare. Finally, we show that, when PT is allowed, drug quality may be higher with than without price controls.

[GRADE system: classification of quality of evidence and strength of recommendation].

PubMed

Aguayo-Albasini, José Luis; Flores-Pastor, Benito; Soria-Aledo, Víctor

2014-02-01

The acquisition and classification of scientific evidence, and subsequent formulation of recommendations constitute the basis for the development of clinical practice guidelines. There are several systems for the classification of evidence and strength of recommendations; the most commonly used nowadays is the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). The GRADE system initially classifies the evidence into high or low, coming from experimental or observational studies; subsequently and following a series of considerations, the evidence is classified into high, moderate, low or very low. The strength of recommendations is based not only on the quality of the evidence, but also on a series of factors such as the risk/benefit balance, values and preferences of the patients and professionals, and the use of resources or costs. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

Cost-utility of empagliflozin in patients with type 2 diabetes at high cardiovascular risk.

PubMed

Nguyen, Elaine; Coleman, Craig I; Nair, Suresh; Weeda, Erin R

2018-02-01

In the Empagliflozin, Cardiovascular Outcomes, and Mortality in Type 2 Diabetes (EMPA-REG) trial, empagliflozin reduced cardiovascular and all-cause mortality in type 2 diabetes (T2D) patients at high cardiovascular risk. We sought to estimate the cost-effectiveness of empagliflozin versus standard treatment for the prevention of cardiovascular morbidity and mortality in patients with T2D. A Markov model was developed to assess the cost-effectiveness of empagliflozin (versus standard treatment) for the prevention of cardiovascular morbidity and mortality in patients with T2D using a 3-month cycle length and a lifetime horizon. Data sources included the EMPA-REG randomized clinical trial and other published epidemiological studies. Outcomes included treatment costs (in 2016 US$), quality-adjusted life-years (QALYs) and incremental cost-effectiveness ratios (ICERs). Probabilistic sensitivity analysis (PSA) was performed to test the robustness of conclusions. Empagliflozin use resulted in higher total lifetime treatment costs ($371,450 versus $272,966) but yielded greater QALYs (10.712 vs. 9.419) compared to standard treatment. This corresponded to an ICER of $76,167 per QALY gained. PSA suggested empagliflozin would be cost-effective in 96% of 10,000 iterations assuming a willingness-to-pay threshold of $100,000 per QALY gained. Empagliflozin may be cost-effective compared to standard treatment in T2D patients at high cardiovascular risk. Copyright © 2017 Elsevier Inc. All rights reserved.

The High Cost of Leaving: An Analysis of the Cost of Teacher Turnover

ERIC Educational Resources Information Center

Watlington, Eliah; Shockley, Robert; Guglielmino, Paul; Felsher, Rivka

2010-01-01

The cost of teacher turnover to schools and school districts has only recently been studied. This research reveals that when high-quality teachers leave the classroom, the effect on both student performance and school and district fiscal operations is significant and deleterious. The implications for study in this area include the planning of…

A Systematic Review of Economic Evaluations of Treatments for Borderline Personality Disorder

PubMed Central

Brettschneider, Christian; Riedel-Heller, Steffi; König, Hans-Helmut

2014-01-01

Purpose The borderline personality disorder is a common mental disorder. It is frequently associated with various mental co-morbidities and a fundamental loss of functioning. The borderline personality disorder causes high costs to society. The aim of this study was to perform a systematic literature review of existing economic evaluations of treatments for borderline personality disorder. Materials and Methods We performed a systematic literature search in MEDLINE, EMBASE, PsycINFO and NHSEED for partial and full economic evaluations regarding borderline personality disorder. Reported cost data were inflated to the year 2012 and converted into US-$ using purchasing power parities to allow for comparability. Quality assessment of the studies was performed by means of the Consensus on Health Economic Criteria checklist, a checklist developed by a Delphi method in cooperation with 23 international experts. Results We identified 6 partial and 9 full economic evaluations. The methodical quality was moderate (fulfilled quality criteria: 79.2% [SD: 15.4%] in partial economic evaluations, 77.3% [SD: 8.5%] in full economic evaluations). Most evaluations analysed psychotherapeutic interventions. Although ambiguous, most evidence exists on dialectical-behavioural therapy. Cognitive behavioural therapy and schema-focused therapy are cost-saving. Evidence on other interventions is scarce. Conclusion The economic evidence is not sufficient to draw robust conclusions for all treatments. It is possible that some treatments are cost-effective. Most evidence exists on dialectical-behavioural therapy. Yet, it is ambiguous. Further research concerning the cost-effectiveness of treatments is necessary as well as the identification of relevant cost categories and the validation of effect measures. PMID:25265185

Scalable, sustainable cost-effective surgical care: a model for safety and quality in the developing world, part III: impact and sustainability.

PubMed

Campbell, Alex; Restrepo, Carolina; Mackay, Don; Sherman, Randy; Varma, Ajit; Ayala, Ruben; Sarma, Hiteswar; Deshpande, Gaurav; Magee, William

2014-09-01

The Guwahati Comprehensive Cleft Care Center (GCCCC) utilizes a high-volume, subspecialized institution to provide safe, quality, and comprehensive and cost-effective surgical care to a highly vulnerable patient population. The GCCCC utilized a diagonal model of surgical care delivery, with vertical inputs of mission-based care transitioning to investments in infrastructure and human capital to create a sustainable, local care delivery system. Over the first 2.5 years of service (May 2011-November 2013), the GCCCC made significant advances in numerous areas. Progress was meticulously documented to evaluate performance and provide transparency to stakeholders including donors, government officials, medical oversight bodies, employees, and patients. During this time period, the GCCCC provided free operations to 7,034 patients, with improved safety, outcomes, and multidisciplinary services while dramatically decreasing costs and increasing investments in the local community. The center has become a regional referral cleft center, and governments of surrounding states have contracted the GCCCC to provide care for their citizens with cleft lip and cleft palate. Additional regional and global impact is anticipated through continued investments into education and training, comprehensive services, and research and outcomes. The success of this public private partnership demonstrates the value of this model of surgical care in the developing world, and offers a blueprint for reproduction. The GCCCC experience has been consistent with previous studies demonstrating a positive volume-outcomes relationship, and provides evidence for the value of the specialty hospital model for surgical delivery in the developing world.

Determining the market value of high-rise residential buildings based on evaluation of consumer properties

NASA Astrophysics Data System (ADS)

Kolobova, Svetlana

2018-03-01

As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

Cost benefit of investment on quality in pharmaceutical manufacturing: WHO GMP pre- and post-certification of a Nigerian pharmaceutical manufacturer.

PubMed

Anyakora, Chimezie; Ekwunife, Obinna; Alozie, Faith; Esuga, Mopa; Ukwuru, Jonathan; Onya, Steve; Nwokike, Jude

2017-09-18

Pharmaceutical companies in Africa need to invest in both facilities and quality management systems to achieve good manufacturing practice (GMP) compliance. Compliance to international GMP standards is important to the attainment of World Health Organization (WHO) prequalification. However, most of the local pharmaceutical manufacturing companies may be deterred from investing in quality because of many reasons, ranging from financial constraints to technical capacity. This paper primarily evaluates benefits against the cost of investing in GMP, using a Nigerian pharmaceutical company, Chi Pharmaceuticals Limited, as a case study. This paper also discusses how to drive more local manufacturers to invest in quality to attain GMP compliance; and proffers practical recommendations for local manufacturers who would want to invest in quality to meet ethical and regulatory obligations. The cost benefit of improving the quality of Chi Pharmaceuticals Limited's facilities and system to attain WHO GMP certification for the production of zinc sulfate 20-mg dispersible tablets was calculated by dividing the annual benefits derived from quality improvement interventions by the annual costs of implementing quality improvement interventions, referred to as a benefit-cost ratio (BCR). Cost benefit of obtaining WHO GMP certification for the production of zinc sulfate 20-mg dispersible tablets was 5.3 (95% confidence interval of 5.0-5.5). Investment in quality improvement intervention is cost-beneficial for local manufacturing companies. Governments and regulators in African countries should support pharmaceutical companies striving to invest in quality. Collaboration of local manufacturing companies with global companies will further improve quality. Local pharmaceutical companies should be encouraged to key into development opportunities available for pharmaceutical companies in Africa.

The evolution of diagnosis-related groups (DRGs): from its beginnings in case-mix and resource use theory, to its implementation for payment and now for its current utilization for quality within and outside the hospital.

PubMed

Goldfield, Norbert

2010-01-01

Policymakers are searching for ways to control health care costs and improve quality. Diagnosis-related groups (DRGs) are by far the most important cost control and quality improvement tool that governments and private payers have implemented. This article reviews why DRGs have had this singular success both in the hospital sector and, over the past 10 years, in ambulatory and managed care settings. Last, the author reviews current trends in the development and implementation of tools that have the key ingredients of DRG success: categorical clinical model, separation of the clinical model from payment weights, separate payment adjustments for nonclinical factors, and outlier payments. Virtually all current tools used to manage health care costs and improve quality do not have these characteristics. This failure explains a key reason for the failure, for example, of the Medicare Advantage program to control health care costs. This article concludes with a discussion of future developments for DRG-type models outside the hospital sector.

Development of a J-T Micro Compressor

NASA Astrophysics Data System (ADS)

Champagne, P.; Olson, J. R.; Nast, T.; Roth, E.; Collaco, A.; Kaldas, G.; Saito, E.; Loung, V.

2015-12-01

Lockheed Martin has developed and tested a space-quality compressor capable of delivering closed-loop gas flow with a high pressure ratio, suitable for driving a Joule- Thomson cold head. The compressor is based on a traditional “Oxford style” dual-opposed piston compressor with linear drive motors and flexure-bearing clearance-seal technology for high reliability and long life. This J-T compressor retains the approximate size, weight, and cost of the ultra-compact, 200 gram Lockheed Martin Pulse Tube Micro Compressor, despite the addition of a flow-rectifying system to convert the AC pressure wave into a steady flow.

A Process Management System for Networked Manufacturing

NASA Astrophysics Data System (ADS)

Liu, Tingting; Wang, Huifen; Liu, Linyan

With the development of computer, communication and network, networked manufacturing has become one of the main manufacturing paradigms in the 21st century. Under the networked manufacturing environment, there exist a large number of cooperative tasks susceptible to alterations, conflicts caused by resources and problems of cost and quality. This increases the complexity of administration. Process management is a technology used to design, enact, control, and analyze networked manufacturing processes. It supports efficient execution, effective management, conflict resolution, cost containment and quality control. In this paper we propose an integrated process management system for networked manufacturing. Requirements of process management are analyzed and architecture of the system is presented. And a process model considering process cost and quality is developed. Finally a case study is provided to explain how the system runs efficiently.

Opportunities for reproductive tourism: cost and quality advantages of Turkey in the provision of in-vitro Fertilization (IVF) services.

PubMed

Yildiz, M Said; Khan, M Mahmud

2016-08-12

The scale and scope of medical tourism have expanded rapidly over the last few decades. Turkey is becoming an important player in this market because of its relatively better service quality and large comparative cost advantage. This paper compares cost, quality and effectiveness of in-vitro fertilization (IVF) in the USA and in Turkey. The data from Turkey were obtained from a hospital specializing in IVF services and the US data came from secondary sources. Package price offered by the dominant IVF-service provider to international patients in Turkey was used as a measure of cost for Turkey while IVF-specific service prices were used to estimate the cost for USA. To compare quality and effectiveness of IVF services, a number of general clinical quality indicators and IVF success rate were used. Indicators of quality, cost and success rate in the Turkish hospital were found to be better than the corresponding indicators in US hospitals. The cost difference of IVF services between USA and Turkey is so significant that the overall cost of obtaining the service from Turkey remains lower even with additional expenses for travel and accommodation. Cost-effectiveness ratio of IVF treatment per successful clinical pregnancy was much lower in Turkey than in the USA. It appears that cost and quality are the two most important factors affecting demand for health care services by international patients in Turkey. Like other important players in the medical tourism market, Turkey should be able to take advantage of its success in IVF, a highly specialized niche market, to transform its health system into an important exporter of general health services.

Cost-benefit analysis: newborn screening for inborn errors of metabolism in Lebanon.

PubMed

Khneisser, I; Adib, S; Assaad, S; Megarbane, A; Karam, P

2015-12-01

Few countries in the Middle East-North Africa region have adopted national newborn screening for inborn errors of metabolism by tandem mass spectrometry (MS/MS). We aimed to evaluate the cost-benefit of newborn screening for such disorders in Lebanon, as a model for other developing countries in the region. Average costs of expected care for inborn errors of metabolism cases as a group, between ages 0 and 18, early and late diagnosed, were calculated from 2007 to 2013. The monetary value of early detection using MS/MS was compared with that of clinical "late detection", including cost of diagnosis and hospitalizations. During this period, 126000 newborns were screened. Incidence of detected cases was 1/1482, which can be explained by high consanguinity rates in Lebanon. A reduction by half of direct cost of care, reaching on average 31,631 USD per detected case was shown. This difference more than covers the expense of starting a newborn screening programme. Although this model does not take into consideration the indirect benefits of the better quality of life of those screened early, it can be argued that direct and indirect costs saved through early detection of these disorders are important enough to justify universal publicly-funded screening, especially in developing countries with high consanguinity rates, as shown through this data from Lebanon. © The Author(s) 2015.

Engineering design of a high-temperature superconductor current lead

NASA Astrophysics Data System (ADS)

Niemann, R. C.; Cha, Y. S.; Hull, J. R.; Daugherty, M. A.; Buckles, W. E.

As part of the US Department of Energy's Superconductivity Pilot Center Program, Argonne National Laboratory and Superconductivity, Inc., are developing high-temperature superconductor (HTS) current leads suitable for application to superconducting magnetic energy storage systems. The principal objective of the development program is to design, construct, and evaluate the performance of HTS current leads suitable for near-term applications. Supporting objectives are to (1) develop performance criteria; (2) develop a detailed design; (3) analyze performance; (4) gain manufacturing experience in the areas of materials and components procurement, fabrication and assembly, quality assurance, and cost; (5) measure performance of critical components and the overall assembly; (6) identify design uncertainties and develop a program for their study; and (7) develop application-acceptance criteria.

Patient mobility and health care quality when regions and patients differ in income.

PubMed

Brekke, Kurt R; Levaggi, Rosella; Siciliani, Luigi; Straume, Odd Rune

2016-12-01

We study the effects of cross-border patient mobility on health care quality and welfare when income varies across and within regions. We use a Salop model with a high-, middle-, and low-income region. In each region, a policy maker chooses health care quality to maximise the utility of its residents when health care costs are financed by general income taxation. In equilibrium, regions with higher income offer better quality, which creates an incentive for patient mobility from lower- to higher-income regions. Assuming a prospective payment scheme based on DRG-pricing, we find that lower non-monetary (administrative) mobility costs have (i) no effect on quality or welfare in the high-income region; (ii) a negative effect on quality but a positive effect on welfare for the middle-income region; and (iii) ambiguous effects on quality and welfare for the low-income region. Lower monetary mobility costs (copayments) might reduce welfare in both the middle- and low-income region. Thus, health policies that stimulate cross-border patient mobility can be counterproductive when regions differ in income. Copyright © 2016 Elsevier B.V. All rights reserved.

Author-paper affiliation network architecture influences the methodological quality of systematic reviews and meta-analyses of psoriasis.

PubMed

Sanz-Cabanillas, Juan Luis; Ruano, Juan; Gomez-Garcia, Francisco; Alcalde-Mellado, Patricia; Gay-Mimbrera, Jesus; Aguilar-Luque, Macarena; Maestre-Lopez, Beatriz; Gonzalez-Padilla, Marcelino; Carmona-Fernandez, Pedro J; Velez Garcia-Nieto, Antonio; Isla-Tejera, Beatriz

2017-01-01

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors' collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews.

High engagement, high quality: A guiding framework for developing empirically informed asynchronous e-learning programs for health professional educators.

PubMed

Sinclair, Peter M; Levett-Jones, Tracey; Morris, Amanda; Carter, Ben; Bennett, Paul N; Kable, Ashley

2017-03-01

E-learning involves the transfer of skills and knowledge via technology so that learners can access meaningful and authentic educational materials. While learner engagement is important, in the context of healthcare education, pedagogy must not be sacrificed for edu-tainment style instructional design. Consequently, health professional educators need to be competent in the use of current web-based educational technologies so that learners are able to access relevant and engaging e-learning materials without restriction. The increasing popularity of asynchronous e-learning programs developed for use outside of formal education institutions has made this need more relevant. In these contexts, educators must balance design and functionality to deliver relevant, cost-effective, sustainable, and accessible programs that overcome scheduling and geographic barriers for learners. This paper presents 10 guiding design principles and their application in the development of an e-learning program for general practice nurses focused on behavior change. Consideration of these principles will assist educators to develop high quality, pedagogically sound, engaging, and interactive e-learning resources. © 2017 John Wiley & Sons Australia, Ltd.

High-speed ultrafast laser machining with tertiary beam positioning (Conference Presentation)

NASA Astrophysics Data System (ADS)

Yang, Chuan; Zhang, Haibin

2017-03-01

For an industrial laser application, high process throughput and low average cost of ownership are critical to commercial success. Benefiting from high peak power, nonlinear absorption and small-achievable spot size, ultrafast lasers offer advantages of minimal heat affected zone, great taper and sidewall quality, and small via capability that exceeds the limits of their predecessors in via drilling for electronic packaging. In the past decade, ultrafast lasers have both grown in power and reduced in cost. For example, recently, disk and fiber technology have both shown stable operation in the 50W to 200W range, mostly at high repetition rate (beyond 500 kHz) that helps avoid detrimental nonlinear effects. However, to effectively and efficiently scale the throughput with the fast-growing power capability of the ultrafast lasers while keeping the beneficial laser-material interactions is very challenging, mainly because of the bottleneck imposed by the inertia-related acceleration limit and servo gain bandwidth when only stages and galvanometers are being used. On the other side, inertia-free scanning solutions like acoustic optics and electronic optical deflectors have small scan field, and therefore not suitable for large-panel processing. Our recent system developments combine stages, galvanometers, and AODs into a coordinated tertiary architecture for high bandwidth and meanwhile large field beam positioning. Synchronized three-level movements allow extremely fast local speed and continuous motion over the whole stage travel range. We present the via drilling results from such ultrafast system with up to 3MHz pulse to pulse random access, enabling high quality low cost ultrafast machining with emerging high average power laser sources.

Treatments for Metastatic Prostate Cancer (mPC): A Review of Costing Evidence.

PubMed

Norum, Jan; Nieder, Carsten

2017-12-01

Prostate cancer (PC) is the most common cancer in Western countries. More than one third of PC patients develop metastatic disease, and the 5-year expected survival in distant disease is about 35%. During the last few years, new treatments have been launched for metastatic castrate-resistant prostate cancer (mCRPC). We aimed to review the current literature on health economic analysis on the treatment of metastatic prostate cancer (mPC), compare the studies, summarize the findings and make the results available to administrators and decision makers. A systematic literature search was done for economic evaluations (cost-minimization, cost-effectiveness, cost-utility, cost-of-illness, cost-of-drug, and cost-benefit analyses). We employed the PubMed ® search engine and searched for publications published between 2012 and 2016. The terms used were "prostate cancer", "metastatic" and "cost". An initial screening of all headlines was performed, selected abstracts were analysed, and finally the full papers investigated. Study characteristics, treatment and comparator, country, type of evaluation, perspective, year of value, time horizon, efficacy data, discount rate, total costs and sensitivity analysis were analysed. The quality was assessed using the Quality of Health Economic Studies (QHES) instrument. A total of 227 publications were detected and screened, 58 selected for full-text assessment and 31 included in the final analyses. Despite the significant international literature on the treatment of mCRPC, there were only 15 studies focusing on cost-effectiveness analysis (CEA). Medical treatment constituted two thirds of the selected studies. Significant costs in the treatment of mCRPC were disclosed. In the pre-docetaxel setting, both abiraterone acetate (AA) and enzalutamide were concluded beyond accepted cost/quality-adjusted life year limits. In the docetaxel refractory setting, most studies concluded that enzalutamide was cost-effective and superior to AA. In most studies, cabazitaxel was not recommended, because of high cost. Looking at bone-targeting drugs, generic zoledronic acid (ZA) was recommended. External beam radiotherapy (EBRT) was analysed in three studies, and single fraction radiotherapy was concluded to be cost saving. Radium-223 was documented as beneficial, but costly. The quality of the studies was generally good, but sensitivity analyses, discounting and the measurement of health outcomes were present in less than two thirds of the selected studies. The treatment of mCRPC was associated with significant cost. In the post-docetaxel setting, single fraction radiotherapy and enzalutamide were considered cost-effective in most studies. Generic ZA was the recommended bone-targeting therapy.

[Quality by design approaches for pharmaceutical development and manufacturing of Chinese medicine].

PubMed

Xu, Bing; Shi, Xin-Yuan; Wu, Zhi-Sheng; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

2017-03-01

The pharmaceutical quality was built by design, formed in the manufacturing process and improved during the product's lifecycle. Based on the comprehensive literature review of pharmaceutical quality by design (QbD), the essential ideas and implementation strategies of pharmaceutical QbD were interpreted. Considering the complex nature of Chinese medicine, the "4H" model was innovated and proposed for implementing QbD in pharmaceutical development and industrial manufacture of Chinese medicine product. "4H" corresponds to the acronym of holistic design, holistic information analysis, holistic quality control, and holistic process optimization, which is consistent with the holistic concept of Chinese medicine theory. The holistic design aims at constructing both the quality problem space from the patient requirement and the quality solution space from multidisciplinary knowledge. Holistic information analysis emphasizes understanding the quality pattern of Chinese medicine by integrating and mining multisource data and information at a relatively high level. The batch-to-batch quality consistence and manufacturing system reliability can be realized by comprehensive application of inspective quality control, statistical quality control, predictive quality control and intelligent quality control strategies. Holistic process optimization is to improve the product quality and process capability during the product lifecycle management. The implementation of QbD is useful to eliminate the ecosystem contradictions lying in the pharmaceutical development and manufacturing process of Chinese medicine product, and helps guarantee the cost effectiveness. Copyright© by the Chinese Pharmaceutical Association.

Clinical applications of commercially available video recording and monitoring systems: inexpensive, high-quality video recording and monitoring systems for endoscopy and microsurgery.

PubMed

Tsunoda, Koichi; Tsunoda, Atsunobu; Ishimoto, ShinnIchi; Kimura, Satoko

2006-01-01

The exclusive charge-coupled device (CCD) camera system for the endoscope and electronic fiberscopes are in widespread use. However, both are usually stationary in an office or examination room, and a wheeled cart is needed for mobility. The total costs of the CCD camera system and electronic fiberscopy system are at least US Dollars 10,000 and US Dollars 30,000, respectively. Recently, the performance of audio and visual instruments has improved dramatically, with a concomitant reduction in their cost. Commercially available CCD video cameras with small monitors have become common. They provide excellent image quality and are much smaller and less expensive than previous models. The authors have developed adaptors for the popular mini-digital video (mini-DV) camera. The camera also provides video and acoustic output signals; therefore, the endoscopic images can be viewed on a large monitor simultaneously. The new system (a mini-DV video camera and an adaptor) costs only US Dollars 1,000. Therefore, the system is both cost-effective and useful for the outpatient clinic or casualty setting, or on house calls for the purpose of patient education. In the future, the authors plan to introduce the clinical application of a high-vision camera and an infrared camera as medical instruments for clinical and research situations.

Disease management positively affects patient quality of life.

PubMed

Walker, David R; Landis, Darryl L; Stern, Patricia M; Vance, Richard P

2003-04-01

Health care costs are spiraling upward. The population of the United States is aging, and many baby boomers will develop multiple chronic health conditions. Disease management is one method for reducing costs associated with chronic health conditions. Although these programs have been proven effective in improving patient health, detailed information about their effect on patient quality of life has been scarce. This article provides preliminary evidence that disease management programs for coronary artery disease, chronic obstructive pulmonary disease, diabetes, and heart failure lead to improved quality of life, which correlates with a healthier, more satisfied, and less costly patient.

Sustainable Groundwater Management Using Economic Incentive Approach

NASA Astrophysics Data System (ADS)

Yan, T.; Shih, J.; Sanchirico, J. N.

2006-12-01

Although groundwater accounts for about 20% of the water consumption in the US, recent urban development, land use changes and agricultural activities in many regions (for example, Chesapeake Bay and eastern shore of Maryland) have resulted in deleterious impacts on groundwater quality. These impacts have dramatically increased potential human health and ecological system risks. One example is nitrogen pollution delivered to local waterways from septic systems via groundwater. Conventional approaches for nitrogen removal, such as pumping and treatment (nitrification-denitrification) process, tend to be expensive. On the other hand, economic incentive approaches (such as marketable permits) have the potential to increase the efficiency of environmental policy by reducing compliance costs for regulated entities and individuals and/or achieving otherwise uneconomical pollution reduction. The success of the sulfur dioxide trading market has led to the creation of trading markets for other pollutants, especially at the regional, state, and smaller (e.g. watershed) scales. In this paper, we develop an integrated framework, which includes a groundwater flow and transport model, and a conceptual management model. We apply this framework to a synthetic set up which includes one farm and two development areas in order to investigate the potential of using economic incentive approaches for groundwater quality management. The policy analysis is carried out by setting up the objective of the modeling framework to minimize the total cost of achieving groundwater quality goals at specific observation point using either a transferable development right (TDR) system between development areas and/or using a tax for fertilizer usage in the farm area. The TDR system consists of a planning agency delineating a region into restricted-use (e.g., agriculture, open space) and high intensity zones (e.g., residential, commercial uses). The agency then endows landowners in the restricted area with development rights and development in the high intensity area is contingent on the purchase of the rights, which are transferred via a market. By comparing these two policy regimes, which are often analyzed separately, we can gain a better sense of the relative costs involved and the potential trade-offs and/or benefits from a hybrid policy. Furthermore, we will also investigate the potential barriers of adopting economic incentive approach specifically for the groundwater management context. These research results will assist policymakers at all levels to better understand how to design effective trading programs and realize the potential costs savings associated with these approaches for sustainable groundwater management.

Developing a Low-Cost System for 3d Data Acquisition

NASA Astrophysics Data System (ADS)

Kossieris, S.; Kourounioti, O.; Agrafiotis, P.; Georgopoulos, A.

2017-11-01

In this paper, a developed low-cost system is described, which aims to facilitate 3D documentation fast and reliably by acquiring the necessary data in outdoor environment for the 3D documentation of façades especially in the case of very narrow streets. In particular, it provides a viable solution for buildings up to 8-10m high and streets as narrow as 2m or even less. In cases like that, it is practically impossible or highly time-consuming to acquire images in a conventional way. This practice would lead to a huge number of images and long processing times. The developed system was tested in the narrow streets of a medieval village on the Greek island of Chios. There, in order to by-pass the problem of short taking distances, it was thought to use high definition action cameras together with a 360˚ camera, which are usually provided with very wide-angle lenses and are capable of acquiring images, of high definition, are rather cheap and, most importantly, extremely light. Results suggest that the system can perform fast 3D data acquisition adequate for deliverables of high quality.

Consequential environmental and economic life cycle assessment of green and gray stormwater infrastructures for combined sewer systems.

PubMed

Wang, Ranran; Eckelman, Matthew J; Zimmerman, Julie B

2013-10-01

A consequential life cycle assessment (LCA) is conducted to evaluate the trade-offs between water quality improvements and the incremental climate, resource, and economic costs of implementing green (bioretention basin, green roof, and permeable pavement) versus gray (municipal separate stormwater sewer systems, MS4) alternatives of stormwater infrastructure expansions against a baseline combined sewer system with combined sewer overflows in a typical Northeast US watershed for typical, dry, and wet years. Results show that bioretention basins can achieve water quality improvement goals (e.g., mitigating freshwater eutrophication) for the least climate and economic costs of 61 kg CO2 eq. and $98 per kg P eq. reduction, respectively. MS4 demonstrates the minimum life cycle fossil energy use of 42 kg oil eq. per kg P eq. reduction. When integrated with the expansion in stormwater infrastructure, implementation of advanced wastewater treatment processes can further reduce the impact of stormwater runoff on aquatic environment at a minimal environmental cost (77 kg CO2 eq. per kg P eq. reduction), which provides support and valuable insights for the further development of integrated management of stormwater and wastewater. The consideration of critical model parameters (i.e., precipitation intensity, land imperviousness, and infrastructure life expectancy) highlighted the importance and implications of varying local conditions and infrastructure characteristics on the costs and benefits of stormwater management. Of particular note is that the impact of MS4 on the local aquatic environment is highly dependent on local runoff quality indicating that a combined system of green infrastructure prior to MS4 potentially provides a more cost-effective improvement to local water quality.

Cost-Effectiveness of Transcatheter Aortic Valve Replacement With a Self-Expanding Prosthesis Versus Surgical Aortic Valve Replacement

PubMed Central

Reynolds, Matthew R.; Lei, Yang; Wang, Kaijun; Chinnakondepalli, Khaja; Vilain, Katherine A.; Magnuson, Elizabeth A.; Galper, Benjamin Z.; Meduri, Christopher U.; Arnold, Suzanne V.; Baron, Suzanne J.; Reardon, Michael J.; Adams, David H.; Popma, Jeffrey J.; Cohen, David J.

2016-01-01

Background Prior studies of the cost-effectiveness of transcatheter aortic valve replacement (TAVR) have been based primarily on a single balloon-expandable system. Objectives The goal of this study was to evaluate the cost-effectiveness of TAVR with a self-expanding prosthesis compared with surgical aortic valve replacement (SAVR) for patients with severe aortic stenosis and high surgical risk. Methods We performed a formal economic analysis on the basis of individual, patient-level data from the CoreValve U.S. High Risk pivotal trial. Empirical data regarding survival and quality of life (QOL) over 2 years, and medical resource use and hospital costs through 12 months were used to project life expectancy, quality-adjusted life expectancy, and lifetime medical costs in order to estimate the incremental cost-effectiveness of TAVR versus SAVR from a U.S. perspective. Results Relative to SAVR, TAVR reduced initial length of stay an average of 4.4 days, decreased the need for rehabilitation services at discharge, and resulted in superior 1-month QOL. Index admission and projected lifetime costs were higher with TAVR than with SAVR (differences $11,260 and $17,849 per patient, respectively), whereas TAVR was projected to provide a lifetime gain of 0.32 quality-adjusted life-years (QALYs; 0.41 life-years [LYs]) with 3% discounting. Lifetime incremental cost-effectiveness ratios (ICERs) were $55,090 per QALY gained and $43,114 per LY gained. Sensitivity analyses indicated that a reduction in the initial cost of TAVR by ~$1,650 would lead to an ICER <$50,000/QALY gained. Conclusions In a high-risk clinical trial population, TAVR with a self-expanding prosthesis provided meaningful clinical benefits compared with SAVR, with incremental costs considered acceptable by current U.S. standards. With expected modest reductions in the cost of index TAVR admissions, the value of TAVR compared with SAVR in this patient population would become high. PMID:26764063

Wheelchair interventions, services and provision for disabled children: a mixed-method systematic review and conceptual framework

PubMed Central

2014-01-01

Background Wheelchairs for disabled children (≤18 years) can provide health, developmental and social benefits. World Health Organisation and United Kingdom Government reports demonstrate the need for improved access to wheelchairs both locally and internationally. The use of health economics within this field is lacking. Provision of wheelchairs based on cost-effectiveness evidence is not currently possible. We conducted the first systematic review in this field to incorporate evidence of effectiveness, service user perspectives, policy intentions and cost-effectiveness in order to develop a conceptual framework to inform future research and service development. Methods We used an adapted EPPI-Centre mixed-method systematic review design with narrative summary, thematic and narrative synthesis. 11 databases were searched. Studies were appraised for quality using one of seven appropriate tools. A conceptual framework was developed from synthesised evidence. Results 22 studies and 14 policies/guidelines were included. Powered wheelchairs appear to offer benefits in reduced need for caregiver assistance; improved communicative, personal-social and cognitive development; and improved mobility function and independent movement. From 14 months of age children can learn some degree of powered wheelchair driving competence. However, effectiveness evidence was limited and low quality. Children and parents placed emphasis on improving social skill and independence. Participation in wider society and development of meaningful relationships were key desired outcomes. Policy intentions and aspirations are in line with the perspectives of children and parents, although translation of policy recommendations into practice is lacking. Conclusions There is a distinct lack of high quality effectiveness and economic evidence in this field. Social and health needs should be seen as equally important when assessing the mobility needs of disabled children. Disabled children and parents placed highest priority on independence and psychosocial outcomes of wheelchair interventions. Translation of policy and guidelines into practice is lacking and more effective implementation strategies are required to improve services and outcomes. Future research should focus on outcome measure development, developing economic evaluation tools and incorporating these into high quality studies to address known research gaps. The novel conceptual framework maps current gaps in evidence and outlines areas for development. PMID:25034517

Electrical Stimulation for Pressure Injuries: A Health Technology Assessment.

PubMed

2017-01-01

Pressure injuries (bedsores) are common and reduce quality of life. They are also costly and difficult to treat. This health technology assessment evaluates the effectiveness, cost-effectiveness, budget impact, and lived experience of adding electrical stimulation to standard wound care for pressure injuries. We conducted a systematic search for studies published to December 7, 2016, limited to randomized and non-randomized controlled trials examining the effectiveness of electrical stimulation plus standard wound care versus standard wound care alone for patients with pressure injuries. We assessed the quality of evidence through Grading of Recommendations Assessment, Development, and Evaluation (GRADE). In addition, we conducted an economic literature review and a budget impact analysis to assess the cost-effectiveness and affordability of electrical stimulation for treatment of pressure ulcers in Ontario. Given uncertainties in clinical evidence and resource use, we did not conduct a primary economic evaluation. Finally, we conducted qualitative interviews with patients and caregivers about their experiences with pressure injuries, currently available treatments, and (if applicable) electrical stimulation. Nine randomized controlled trials and two non-randomized controlled trials were found from the systematic search. There was no significant difference in complete pressure injury healing between adjunct electrical stimulation and standard wound care. There was a significant difference in wound surface area reduction favouring electrical stimulation compared with standard wound care.The only study on cost-effectiveness of electrical stimulation was partially applicable to the patient population of interest. Therefore, the cost-effectiveness of electrical stimulation cannot be determined. We estimate that the cost of publicly funding electrical stimulation for pressure injuries would be $0.77 to $3.85 million yearly for the next 5 years.Patients and caregivers reported that pressure injuries were burdensome and reduced their quality of life. Patients and caregivers also noted that electrical stimulation seemed to reduce the time it took the wounds to heal. While electrical stimulation is safe to use (GRADE quality of evidence: high) there is uncertainty about whether it improves wound healing (GRADE quality of evidence: low). In Ontario, publicly funding electrical stimulation for pressure injuries could result in extra costs of $0.77 to $3.85 million yearly for the next 5 years.

Is the Venner-PneuX Endotracheal Tube System A Cost-Effective Option For Post Cardiac Surgery Care?

PubMed

Andronis, Lazaros; Oppong, Raymond A; Manga, Na'ngono; Senanayake, Eshan; Gopal, Shameer; Charman, Susan; Giri, Ramesh; Luckraz, Heyman

2018-04-27

Ventilator-associated pneumonia (VAP) is common and costly. In a recent randomized controlled trial, the Venner-PneuX (VPX) endotracheal tube system was found to be superior to standard endotracheal tubes (SET) in preventing VAP. However, VPX is considerably more expensive. We evaluated the costs and benefits of VPX to determine whether replacing SET with VPX is a cost-effective option for intensive care units. We developed a decision analytic model to compare intubation with VPX or SET for patients requiring mechanical ventilation post cardiac surgery. The model was populated with existing evidence on costs, effectiveness and quality of life. Cost-effectiveness and cost-utility analyses were conducted from an NHS hospital perspective. Uncertainty was assessed through deterministic and probabilistic sensitivity analyses. Compared to SET, VPX is associated with an expected cost saving of £738 per patient. VPX led to a small increase in quality-adjusted life years (QALYs), indicating that the device is overall less costly and more effective than SET. The probability of VPX being cost-effective at £30,000 per QALY is 97%. VPX would cease to be cost-effective if (i) it led to a risk reduction smaller than 0.02 compared to SET, (ii) the acquisition cost of VPX was as high as £890 or, (iii) the cost of treating a case of VAP was lower than £1,450. VPX resulted in improved outcomes and savings which far offset the cost of the device, suggesting that replacing SET with VPX is overall beneficial. Findings were robust to extreme values of key parameters. Copyright © 2018. Published by Elsevier Inc.

Low cost silicon solar array project silicon materials task: Establishment of the feasibility of a process capable of low-cost, high volume production of silane (step 1) and the pyrolysis of silane to semiconductor-grade silicon (step 2)

NASA Technical Reports Server (NTRS)

Breneman, W. C.; Farrier, E. G.; Rexer, J.

1977-01-01

Extended operation of a small process-development unit routinely produced high quality silane in 97+% yield from dichlorosilane. The production rate was consistent with design loadings for the fractionating column and for the redistribution reactor. A glass fluid-bed reactor was constructed for room temperature operation. The behavior of a bed of silcon particles was observed as a function of various feedstocks, component configurations, and operating conditions. For operating modes other than spouting, the bed behaved in an erratic and unstable manner. A method was developed for casting molten silicon powder into crack-free solid pellets for process evaluation. The silicon powder was melted and cast into thin walled quartz tubes that sacrificially broke on cooling.

A review of cellphone microscopy for disease detection.

PubMed

Dendere, R; Myburg, N; Douglas, T S

2015-12-01

The expansion in global cellphone network coverage coupled with advances in cellphone imaging capabilities present an opportunity for the advancement of cellphone microscopy as a low-cost alternative to conventional microscopy for disease detection in resource-limited regions. The development of cellphone microscopy has also benefitted from the availability of low-cost miniature microscope components such as low-power light-emitting diodes and ball lenses. As a result, researchers are developing hardware and software techniques that would enable such microscopes to produce high-resolution, diagnostic-quality images. This approach may lead to more widespread delivery of diagnostic services in resource-limited areas where there is a shortage of the skilled labour required for conventional microscopy and where prevalence of infectious and other diseases is still high. In this paper, we review current techniques, clinical applications and challenges faced in the field of cellphone microscopy. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

Breast cancer management: quality-of-life and cost considerations.

PubMed

Radice, Davide; Redaelli, Alberto

2003-01-01

The purpose of this article was to provide a literature-based extensive overview of the quality-of-life and cost issues posed by the management of breast cancer. Incidence and mortality rates vary widely in different countries. Breast cancer accounts approximately for one-fifth of all deaths in women aged 40-50 years. The 1994-1998 incidence rate in the US population was on average 114.3 per 100 000 women. Treatment options include surgery, radiotherapy and drug therapy (cytotoxic and endocrine drugs). All treatment options affect patients' health-related quality of life (HR-QOL) in various ways. The use of cytotoxic agents has a particularly large HR-QOL impact. HR-QOL questionnaires are complex tools, not routinely used in breast cancer trials.Worldwide, around 10 million individuals develop cancer each year; this figure is expected to increase to 15 million in 2020. For all cancers, the total economic burden of this disease worldwide was projected by the authors to be in the range of $US 300-400 billion in 2001 (about $US 100-140 billion as direct costs and the remainder as indirect costs [morbidity and mortality]). According to the National Institute of Health (NIH), the total cost of cancer was estimated at $US 156.7 billion in 2001 in US ($US 56.4 billion as direct costs, $US 15.6 as indirect morbidity costs, and $US 84.7 billion as indirect mortality costs). Based on limited information, in the US, breast cancer can be projected to account for about one-fifth/one-fourth of the total cost of cancer. Breast cancer treatment costs are higher in the US than in other developed countries. Both direct and indirect costs are dependent on disease stage. The per-patient costs for initial care in 1992 were estimated at $US 10 813, for continuing care at $US 1084 and for terminal care at $US 17 886. Stage-specific costs provide information for cost-effectiveness analyses of cancer-control initiatives, such as screening programmes. Economic studies on breast cancer are heterogeneous, and the cost estimates made are not easily generalisable. The cost of treatment for breast cancer in developing countries is < or =5% of that in developed regions.

Improving the Accuracy of Extracting Surface Water Quality Levels (SWQLs) Using Remote Sensing and Artificial Neural Network: a Case Study in the Saint John River, Canada

NASA Astrophysics Data System (ADS)

Sammartano, G.; Spanò, A.

2017-09-01

Delineating accurate surface water quality levels (SWQLs) always presents a great challenge to researchers. Existing methods of assessing surface water quality only provide individual concentrations of monitoring stations without providing the overall SWQLs. Therefore, the results of existing methods are usually difficult to be understood by decision-makers. Conversely, the water quality index (WQI) can simplify surface water quality assessment process to be accessible to decision-makers. However, in most cases, the WQI reflects inaccurate SWQLs due to the lack of representative water samples. It is very challenging to provide representative water samples because this process is costly and time consuming. To solve this problem, we introduce a cost-effective method which combines the Landsat-8 imagery and artificial intelligence to develop models to derive representative water samples by correlating concentrations of ground truth water samples to satellite spectral information. Our method was validated and the correlation between concentrations of ground truth water samples and predicted concentrations from the developed models reached a high level of coefficient of determination (R2) > 0.80, which is trustworthy. Afterwards, the predicted concentrations over each pixel of the study area were used as an input to the WQI developed by the Canadian Council of Ministers of the Environment to extract accurate SWQLs, for drinking purposes, in the Saint John River. The results indicated that SWQL was observed as 67 (Fair) and 59 (Marginal) for the lower and middle basins of the river, respectively. These findings demonstrate the potential of using our approach in surface water quality management.

A web tool for STORET/WQX water quality data retrieval and Best Management Practice scenario suggestion.

PubMed

Park, Youn Shik; Engel, Bernie A; Kim, Jonggun; Theller, Larry; Chaubey, Indrajeet; Merwade, Venkatesh; Lim, Kyoung Jae

2015-03-01

Total Maximum Daily Load is a water quality standard to regulate water quality of streams, rivers and lakes. A wide range of approaches are used currently to develop TMDLs for impaired streams and rivers. Flow and load duration curves (FDC and LDC) have been used in many states to evaluate the relationship between flow and pollutant loading along with other models and approaches. A web-based LDC Tool was developed to facilitate development of FDC and LDC as well as to support other hydrologic analyses. In this study, the FDC and LDC tool was enhanced to allow collection of water quality data via the web and to assist in establishing cost-effective Best Management Practice (BMP) implementations. The enhanced web-based tool provides use of water quality data not only from the US Geological Survey but also from the Water Quality Portal for the U.S. via web access. Moreover, the web-based tool identifies required pollutant reductions to meet standard loads and suggests a BMP scenario based on ability of BMPs to reduce pollutant loads, BMP establishment and maintenance costs. In the study, flow and water quality data were collected via web access to develop LDC and to identify the required reduction. The suggested BMP scenario from the web-based tool was evaluated using the EPA Spreadsheet Tool for the Estimation of Pollutant Load model to attain the required pollutant reduction at least cost. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a nurse case management service: a proposed business plan for rural hospitals.

PubMed

Adams, Marsha Howell; Crow, Carolyn S

2005-01-01

The nurse case management service (NCMS) for rural hospitals is an entrepreneurial endeavor designed to provide rural patients with quality, cost-effective healthcare. This article describes the development of an NCMS. A detailed marketing and financial plan, a review of industry trends, and the legal structure and risks associated with the development of the venture are presented. The financial plan projects a minimum savings of 223,200 dollars for rural institutions annually. To improve quality and reduce cost for rural hospitals, the authors recommend implementation of an NCMS.

Biomass supply chain optimisation for Organosolv-based biorefineries.

PubMed

Giarola, Sara; Patel, Mayank; Shah, Nilay

2014-05-01

This work aims at providing a Mixed Integer Linear Programming modelling framework to help define planning strategies for the development of sustainable biorefineries. The up-scaling of an Organosolv biorefinery was addressed via optimisation of the whole system economics. Three real world case studies were addressed to show the high-level flexibility and wide applicability of the tool to model different biomass typologies (i.e. forest fellings, cereal residues and energy crops) and supply strategies. Model outcomes have revealed how supply chain optimisation techniques could help shed light on the development of sustainable biorefineries. Feedstock quality, quantity, temporal and geographical availability are crucial to determine biorefinery location and the cost-efficient way to supply the feedstock to the plant. Storage costs are relevant for biorefineries based on cereal stubble, while wood supply chains present dominant pretreatment operations costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

An Integrated Data-Driven Strategy for Safe-by-Design Nanoparticles: The FP7 MODERN Project.

PubMed

Brehm, Martin; Kafka, Alexander; Bamler, Markus; Kühne, Ralph; Schüürmann, Gerrit; Sikk, Lauri; Burk, Jaanus; Burk, Peeter; Tamm, Tarmo; Tämm, Kaido; Pokhrel, Suman; Mädler, Lutz; Kahru, Anne; Aruoja, Villem; Sihtmäe, Mariliis; Scott-Fordsmand, Janeck; Sorensen, Peter B; Escorihuela, Laura; Roca, Carlos P; Fernández, Alberto; Giralt, Francesc; Rallo, Robert

2017-01-01

The development and implementation of safe-by-design strategies is key for the safe development of future generations of nanotechnology enabled products. The safety testing of the huge variety of nanomaterials that can be synthetized is unfeasible due to time and cost constraints. Computational modeling facilitates the implementation of alternative testing strategies in a time and cost effective way. The development of predictive nanotoxicology models requires the use of high quality experimental data on the structure, physicochemical properties and bioactivity of nanomaterials. The FP7 Project MODERN has developed and evaluated the main components of a computational framework for the evaluation of the environmental and health impacts of nanoparticles. This chapter describes each of the elements of the framework including aspects related to data generation, management and integration; development of nanodescriptors; establishment of nanostructure-activity relationships; identification of nanoparticle categories; hazard ranking and risk assessment.

Scalable graphene production from ethanol decomposition by microwave argon plasma torch

NASA Astrophysics Data System (ADS)

Melero, C.; Rincón, R.; Muñoz, J.; Zhang, G.; Sun, S.; Perez, A.; Royuela, O.; González-Gago, C.; Calzada, M. D.

2018-01-01

A fast, efficient and simple method is presented for the production of high quality graphene on a large scale by using an atmospheric pressure plasma-based technique. This technique allows to obtain high quality graphene in powder in just one step, without the use of neither metal catalysts and nor specific substrate during the process. Moreover, the cost for graphene production is significantly reduced since the ethanol used as carbon source can be obtained from the fermentation of agricultural industries. The process provides an additional benefit contributing to the revalorization of waste in the production of a high-value added product like graphene. Thus, this work demonstrates the features of plasma technology as a low cost, efficient, clean and environmentally friendly route for production of high-quality graphene.

Optimal city size and population density for the 21st century.

PubMed

Speare A; White, M J

1990-10-01

The thesis that large scale urban areas result in greater efficiency, reduced costs, and a better quality of life is reexamined. The environmental and social costs are measured for different scales of settlement. The desirability and perceived problems of a particular place are examined in relation to size of place. The consequences of population decline are considered. New York city is described as providing both opportunities in employment, shopping, and cultural activities as well as a high cost of living, crime, and pollution. The historical development of large cities in the US is described. Immigration has contributed to a greater concentration of population than would have otherwise have occurred. The spatial proximity of goods and services argument (agglomeration economies) has changed with advancements in technology such as roads, trucking, and electronic communication. There is no optimal city size. The overall effect of agglomeration can be assessed by determining whether the markets for goods and labor are adequate to maximize well-being and balance the negative and positive aspects of urbanization. The environmental costs of cities increase with size when air quality, water quality, sewage treatment, and hazardous waste disposal is considered. Smaller scale and lower density cities have the advantages of a lower concentration of pollutants. Also, mobilization for program support is easier with homogenous population. Lower population growth in large cities would contribute to a higher quality of life, since large metropolitan areas have a concentration of immigrants, younger age distributions, and minority groups with higher than average birth rates. The negative consequences of decline can be avoided if reduction of population in large cities takes place gradually. For example, poorer quality housing can be removed for open space. Cities should, however, still attract all classes of people with opportunities equally available.

Inland marine fish culture in low-salinity recirculating aquaculture systems

USDA-ARS?s Scientific Manuscript database

Expansion of marine aquaculture is challenged by the high cost and limited availability of coastal land and water resources, effluent concerns, high production costs, restricted growing seasons, lack of quality seedstock, and inadequate regulatory and permitting processes. Many of these constraints...

The development of a nutritious low cost weaning food for Kenya infants.

PubMed

Ward, D; Ainsworth, P

1998-01-01

The aim of this research was to develop an inexpensive weaning food of adequate dietary energy, protein and fat, for an infant of four to six months, that can be manufactured in Kenya, using readily available resources and technology. Product formulation was developed by using low cost, readily available and culturally acceptable food products. A cooked porridge was prepared using the traditional oven top method. Subsequently, the porridge was drum dried, blended with ground pumpkin seeds, heat sealed and stored at ambient temperature (22 degrees Centigrade) for eight weeks. Chemical analysis was then carried out to determine the total percentage energy, protein, fat and carbohydrate content of the dried mix. All were in accordance with the theoretical values. This analysis indicated that in order to meet the recommended daily allowances for fat and energy, the addition of oil was necessary, this value was calculated theoretically. In vitro protein digestibility was 82.5 per cent, confirming a high quality protein food. HPLC analysis detected no free floating water soluble amino acids, indicating food stability. A low peroxide value was found, confirming a rancid free food. Viscometer analysis of the reconstituted mix confirmed a nutrient and energy dense food at an acceptable consistency for infant feeding. The addition of a small amount of oil, to the reconstituted mix lowered the viscosity, allowing for the addition of an increase in the quality of dried mix, increasing both nutrient and energy density. The organoleptic qualities of the food were evaluated by a semi-trained panel. The overall appearance was highly rated, with flavour slightly less favourable.

High food prices and the global financial crisis have reduced access to nutritious food and worsened nutritional status and health.

PubMed

Brinkman, Henk-Jan; de Pee, Saskia; Sanogo, Issa; Subran, Ludovic; Bloem, Martin W

2010-01-01

A global economic and financial crisis is engulfing the developing world, coming on top of high food and fuel prices. This paper assesses the impact of the crises on food consumption, nutrition, and health. Several methods were applied, including risk analysis using the cost of the food basket, assessment surveys, simulations, regression analysis using a food consumption score (FCS), reflecting diet frequency and diversity, and a review of the impact of such dietary changes on nutritional status and health. The cost of the food basket increased in several countries, forcing households to reduce quality and quantity of food consumed. The FCS, which is a measure of diet diversity, is negatively correlated with food prices. Simulations show that energy consumption declined during 2006-2010 in nearly all developing regions, resulting potentially in an additional 457 million people (of 4.5 billion) at risk of being hungry and many more unable to afford the dietary quality required to perform, develop, and grow well. As a result of the crises, large numbers of vulnerable households have reduced the quality and quantity of foods they consume and are at risk of increased malnutrition. Population groups most affected are those with the highest requirements, including young children, pregnant and lactating women, and the chronically ill (particularly people with HIV/AIDS and tuberculosis). Because undernutrition during the first 2 y of life has life-long consequences, even short-term price rises will have long-term effects. Thus, measures to mitigate the impact of the crises are urgently required.

The role of technology in reducing health care costs. Phase II and phase III.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cilke, John F.; Parks, Raymond C.; Funkhouser, Donald Ray

2004-04-01

In Phase I of this project, reported in SAND97-1922, Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. The effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements and an economic analysis model for development of care pathway costs for two conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Phases II and III of this project, which are presented in this report, were directed at detailing the parameters of telemedicine that influence care deliverymore » costs and quality. These results were used to identify and field test the communication, interoperability, and security capabilities needed for cost-effective, secure, and reliable health care via telemedicine.« less

Economic burden of mucormycosis in the United States: can a vaccine be cost-effective?

PubMed

Ibrahim, Ashraf S; Edwards, John E; Bryant, Richard; Spellberg, Brad

2009-01-01

Mucormycosis is a life-threatening infection which causes unacceptably high morbidity and mortality despite treatment. Therefore, a vaccine to prevent mucormycosis is desirable. A major barrier to developing an anti-mucormycosis vaccine is the perception that such a vaccine would not be cost-effective to deploy because the disease is rare. We used data from a recent retrospective study to calculate the annual cost to the US healthcare system caused by mucormycosis infections. We created a model to estimate the cost-efficacy of a niche, anti-mucormycosis vaccine deployed in a targeted manner to high-risk patients. We found that each case of mucormycosis results in an average direct cost to the US healthcare system of $97,743, for an overall cost of mucormycosis of $50 million per year. In the base case scenario, targeted deployment of an anti-mucormycosis vaccine would result in a net cost per quality adjusted life year saved (QUALY) of $17,249. Variations in the price of the vaccine, its market penetration, or the cost of infection could dramatically decrease the net cost, and could even result in net savings per QUALY. In conclusion, mucormycosis causes considerable cost to the US health care system. Targeted deployment of a niche vaccine could decrease infection rates and mortality from mucormycosis in a cost-effective manner.

Development and field validation of a community-engaged particulate matter air quality monitoring network in Imperial, California, USA.

PubMed

Carvlin, Graeme N; Lugo, Humberto; Olmedo, Luis; Bejarano, Ester; Wilkie, Alexa; Meltzer, Dan; Wong, Michelle; King, Galatea; Northcross, Amanda; Jerrett, Michael; English, Paul B; Hammond, Donald; Seto, Edmund

2017-12-01

The Imperial County Community Air Monitoring Network was developed as part of a community-engaged research study to provide real-time particulate matter (PM) air quality information at a high spatial resolution in Imperial County, California. The network augmented the few existing regulatory monitors and increased monitoring near susceptible populations. Monitors were both calibrated and field validated, a key component of evaluating the quality of the data produced by the community monitoring network. This paper examines the performance of a customized version of the low-cost Dylos optical particle counter used in the community air monitors compared with both PM 2.5 and PM 10 (particulate matter with aerodynamic diameters <2.5 and <10 μm, respectively) federal equivalent method (FEM) beta-attenuation monitors (BAMs) and federal reference method (FRM) gravimetric filters at a collocation site in the study area. A conversion equation was developed that estimates particle mass concentrations from the native Dylos particle counts, taking into account relative humidity. The R 2 for converted hourly averaged Dylos mass measurements versus a PM 2.5 BAM was 0.79 and that versus a PM 10 BAM was 0.78. The performance of the conversion equation was evaluated at six other sites with collocated PM 2.5 environmental beta-attenuation monitors (EBAMs) located throughout Imperial County. The agreement of the Dylos with the EBAMs was moderate to high (R 2 = 0.35-0.81). The performance of low-cost air quality sensors in community networks is currently not well documented. This paper provides a methodology for quantifying the performance of a next-generation Dylos PM sensor used in the Imperial County Community Air Monitoring Network. This air quality network provides data at a much finer spatial and temporal resolution than has previously been possible with government monitoring efforts. Once calibrated and validated, these high-resolution data may provide more information on susceptible populations, assist in the identification of air pollution hotspots, and increase community awareness of air pollution.

The cost-effectiveness of infliximab in Crohn's disease.

PubMed

Smart, Claire; Selinger, Christian P

2014-10-01

Crohn's disease (CD) is a chronic inflammatory condition that can affect any part of the gastrointestinal tract. It leads to severe symptoms and reduced quality of life. Infliximab is a monoclonal antibody against TNF-α and is effective in treating moderate to severe CD. It is associated with high treatment costs, but subsequent reductions in hospitalisation and surgery have been reported. This review examines the evidence for the cost-effectiveness of infliximab for the treatment of CD. Studies have been found to be very heterogeneous depending on setting, costs assumed and clinical data. Within the UK setting infliximab has been found to be cost effective with increased costs of around £25,000 per quality adjusted life year gained.

Space Network Ground Segment Sustainment (SGSS) Project: Developing a COTS-Intensive Ground System

NASA Technical Reports Server (NTRS)

Saylor, Richard; Esker, Linda; Herman, Frank; Jacobsohn, Jeremy; Saylor, Rick; Hoffman, Constance

2013-01-01

Purpose of the Space Network Ground Segment Sustainment (SGSS) is to implement a new modern ground segment that will enable the NASA Space Network (SN) to deliver high quality services to the SN community for the future The key SGSS Goals: (1) Re-engineer the SN ground segment (2) Enable cost efficiencies in the operability and maintainability of the broader SN.

Does Teacher Professional Development Improve Math and Science Outcomes and Is It Cost Effective?

ERIC Educational Resources Information Center

Foster, John M.; Toma, Eugenia F.; Troske, SuZanne P.

2013-01-01

Scholars and policymakers see improving teacher quality as a key way to improve student learning. While quality may be improved in a variety of ways for pre-service teachers, professional development is one of the few avenues by which quality can be improved for those teachers already in the teaching profession. But professional development, like…

Ambulatory anesthesia for cosmetic surgery in Brazil.

PubMed

May, Diego Marcelo

2016-08-01

Outpatient plastic surgery is growing around the world. This industry faces unique challenges in terms of patient selection and standards of practice to ensure safety and cost-effectiveness. This review will highlight information about anesthesia practice for outpatient cosmetic surgery in Brazil, especially regarding regulation, legislation, and medical tourism. Medical tourism is growing worldwide, with a flow of patients traveling from developed to developing countries where procedures can be done at a fraction of the cost as in the patient's home country. Though generally well tolerated, there are concerns about incomplete data on outcomes of office-based surgeries and lack of safety standards. Brazil is one of the world's leaders in cosmetic surgery. Strong legislation governing outpatient facilities and continued development of accrediting standards for healthcare facilities are indications of a commitment to patient safety and high quality of care. Although the market for medical tourism in this country is high, there are still barriers to overcome before Brazil reaches its full potential in this industry.

SUPERFUND INNOVATIVE TECHNOLOGIES EVALUATION ...

EPA Pesticide Factsheets

This task seeks to identify high priority needs of the Regions and Program Offices for innovative field sampling, characterization, monitoring, and measurement technologies. When an appropriate solution to a specific problem is identified, a field demonstration is conducted to document the performance and cost of the proposed technologies. The use of field analysis almost always provides a savings in time and cost over the usual sample and ship to a conventional laboratory for analysis approach to site characterization and monitoring. With improvements in technology and appropriate quality assurance/quality control, field analysis has been shown to provide high quality data, useful for most environmental monitoring or characterization projects. An emphasis of the program is to seek out innovative solutions to existing problems and to provide the cost and performance data a user would require to make an informed decision regarding the adequacy of a technology to address a specific environmental problem. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Medicaid program choice, inertia and adverse selection.

PubMed

Marton, James; Yelowitz, Aaron; Talbert, Jeffery C

2017-12-01

In 2012, Kentucky implemented Medicaid managed care statewide, auto-assigned enrollees to three plans, and allowed switching. Using administrative data, we find that the state's auto-assignment algorithm most heavily weighted cost-minimization and plan balancing, and placed little weight on the quality of the enrollee-plan match. Immobility - apparently driven by health plan inertia - contributed to the success of the cost-minimization strategy, as more than half of enrollees auto-assigned to even the lowest quality plans did not opt-out. High-cost enrollees were more likely to opt-out of their auto-assigned plan, creating adverse selection. The plan with arguably the highest quality incurred the largest initial profit margin reduction due to adverse selection prior to risk adjustment, as it attracted a disproportionate share of high-cost enrollees. The presence of such selection, caused by differential degrees of mobility, raises concerns about the long run viability of the Medicaid managed care market without such risk adjustment. Copyright © 2017 Elsevier B.V. All rights reserved.

The rise of low-cost sensing for managing air pollution in cities.

PubMed

Kumar, Prashant; Morawska, Lidia; Martani, Claudio; Biskos, George; Neophytou, Marina; Di Sabatino, Silvana; Bell, Margaret; Norford, Leslie; Britter, Rex

2015-02-01

Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, while addressing the major challenges for their effective implementation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Time-driven Activity-based Costing More Accurately Reflects Costs in Arthroplasty Surgery.

PubMed

Akhavan, Sina; Ward, Lorrayne; Bozic, Kevin J

2016-01-01

Cost estimates derived from traditional hospital cost accounting systems have inherent limitations that restrict their usefulness for measuring process and quality improvement. Newer approaches such as time-driven activity-based costing (TDABC) may offer more precise estimates of true cost, but to our knowledge, the differences between this TDABC and more traditional approaches have not been explored systematically in arthroplasty surgery. The purposes of this study were to compare the costs associated with (1) primary total hip arthroplasty (THA); (2) primary total knee arthroplasty (TKA); and (3) three surgeons performing these total joint arthroplasties (TJAs) as measured using TDABC versus traditional hospital accounting (TA). Process maps were developed for each phase of care (preoperative, intraoperative, and postoperative) for patients undergoing primary TJA performed by one of three surgeons at a tertiary care medical center. Personnel costs for each phase of care were measured using TDABC based on fully loaded labor rates, including physician compensation. Costs associated with consumables (including implants) were calculated based on direct purchase price. Total costs for 677 primary TJAs were aggregated over 17 months (January 2012 to May 2013) and organized into cost categories (room and board, implant, operating room services, drugs, supplies, other services). Costs derived using TDABC, based on actual time and intensity of resources used, were compared with costs derived using TA techniques based on activity-based costing and indirect costs calculated as a percentage of direct costs from the hospital decision support system. Substantial differences between cost estimates using TDABC and TA were found for primary THA (USD 12,982 TDABC versus USD 23,915 TA), primary TKA (USD 13,661 TDABC versus USD 24,796 TA), and individually across all three surgeons for both (THA: TDABC = 49%-55% of TA total cost; TKA: TDABC = 53%-55% of TA total cost). Cost categories with the most variability between TA and TDABC estimates were operating room services and room and board. Traditional hospital cost accounting systems overestimate the costs associated with many surgical procedures, including primary TJA. TDABC provides a more accurate measure of true resource use associated with TJAs and can be used to identify high-cost/high-variability processes that can be targeted for process/quality improvement. Level III, therapeutic study.

International Collaboration in the field of GNSS-Meteorology and Climate Monitoring

NASA Astrophysics Data System (ADS)

Jones, J.; Guerova, G.; Dousa, J.; Bock, O.; Elgered, G.; Vedel, H.; Pottiaux, E.; de Haan, S.; Pacione, R.; Dick, G.; Wang, J.; Gutman, S. I.; Wickert, J.; Rannat, K.; Liu, G.; Braun, J. J.; Shoji, Y.

2012-12-01

International collaboration in the field of GNSS-meteorology and climate monitoring is essential, as severe weather and climate change have no respect for national boundaries. The use of Global Navigation Satellite Systems (GNSS) for meteorological purposes is an established atmospheric observing technique, which can accurately sense water vapour, the most abundant greenhouse gas, accounting for 60-70% of atmospheric warming. Severe weather forecasting is challenging, in part due to the high temporal and spatial variation of atmospheric water vapour. Water vapour is currently under-sampled and obtaining and exploiting more high-quality humidity observations is essential to severe weather forecasting and climate monitoring. A proposed EU COST Action (http://www.cost.eu) will address new and improved capabilities from concurrent developments in both GNSS and atmospheric communities to improve (short-range) weather forecasts and climate projections. For the first time, the synergy of the three GNSS systems, GPS, GLONASS and Galileo, will be used to develop new, advanced tropospheric products, stimulating the full potential exploitation of multi-GNSS water vapour estimates on a wide range of temporal and spatial scales, from real-time severe weather monitoring and forecasting to climate research. The Action will work in close collaboration with the Global Climate Observing System (GCOS) Reference Upper Air Network (GRUAN), GNSS Precipitable Water Task Team (TT). GRUAN is a global reference observing network, designed to meet climate requirements and to fill a major void in the current global observing system. GRUAN observations will provide long-term, high-quality data to determine climatic trends and to constrain and validate data from space-based remote sensors. Ground-based GNSS PW was identified as a Priority 1 measurement for GRUAN, and the GNSS-PW TT's goal is to develop explicit guidance on hardware, software and data management practices to obtain GNSS PW measurements of consistent quality at all GRUAN sites. The GRUAN GNSS-PW TT and the proposed COST Action will look to expand the international framework already in place with the European E-GVAP programme to facilitate global collaboration to facilitate knowledge and data exchange.

Cost-effectiveness of lobectomy versus genetic testing (Afirma®) for indeterminate thyroid nodules: Considering the costs of surveillance.

PubMed

Balentine, Courtney J; Vanness, David J; Schneider, David F

2018-01-01

We evaluated whether diagnostic thyroidectomy for indeterminate thyroid nodules would be more cost-effective than genetic testing after including the costs of long-term surveillance. We used a Markov decision model to estimate the cost-effectiveness of thyroid lobectomy versus genetic testing (Afirma®) for evaluation of indeterminate (Bethesda 3-4) thyroid nodules. The base case was a 40-year-old woman with a 1-cm indeterminate nodule. Probabilities and estimates of utilities were obtained from the literature. Cost estimates were based on Medicare reimbursements with a 3% discount rate for costs and quality-adjusted life-years. During a 5-year period after the diagnosis of indeterminate thyroid nodules, lobectomy was less costly and more effective than Afirma® (lobectomy: $6,100; 4.50 quality-adjusted life- years vs Afirma®: $9,400; 4.47 quality-adjusted life-years). Only in 253 of 10,000 simulations (2.5%) did Afirma® show a net benefit at a cost-effectiveness threshold of $100,000 per quality- adjusted life-years. There was only a 0.3% probability of Afirma® being cost saving and a 14.9% probability of improving quality-adjusted life-years. Our base case estimate suggests that diagnostic lobectomy dominates genetic testing as a strategy for ruling out malignancy of indeterminate thyroid nodules. These results, however, were highly sensitive to estimates of utilities after lobectomy and living under surveillance after Afirma®. Published by Elsevier Inc.

xSDK Foundations: Toward an Extreme-scale Scientific Software Development Kit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heroux, Michael A.; Bartlett, Roscoe; Demeshko, Irina

Here, extreme-scale computational science increasingly demands multiscale and multiphysics formulations. Combining software developed by independent groups is imperative: no single team has resources for all predictive science and decision support capabilities. Scientific libraries provide high-quality, reusable software components for constructing applications with improved robustness and portability. However, without coordination, many libraries cannot be easily composed. Namespace collisions, inconsistent arguments, lack of third-party software versioning, and additional difficulties make composition costly. The Extreme-scale Scientific Software Development Kit (xSDK) defines community policies to improve code quality and compatibility across independently developed packages (hypre, PETSc, SuperLU, Trilinos, and Alquimia) and provides a foundationmore » for addressing broader issues in software interoperability, performance portability, and sustainability. The xSDK provides turnkey installation of member software and seamless combination of aggregate capabilities, and it marks first steps toward extreme-scale scientific software ecosystems from which future applications can be composed rapidly with assured quality and scalability.« less

xSDK Foundations: Toward an Extreme-scale Scientific Software Development Kit

DOE PAGES

Heroux, Michael A.; Bartlett, Roscoe; Demeshko, Irina; ...

2017-03-01

Here, extreme-scale computational science increasingly demands multiscale and multiphysics formulations. Combining software developed by independent groups is imperative: no single team has resources for all predictive science and decision support capabilities. Scientific libraries provide high-quality, reusable software components for constructing applications with improved robustness and portability. However, without coordination, many libraries cannot be easily composed. Namespace collisions, inconsistent arguments, lack of third-party software versioning, and additional difficulties make composition costly. The Extreme-scale Scientific Software Development Kit (xSDK) defines community policies to improve code quality and compatibility across independently developed packages (hypre, PETSc, SuperLU, Trilinos, and Alquimia) and provides a foundationmore » for addressing broader issues in software interoperability, performance portability, and sustainability. The xSDK provides turnkey installation of member software and seamless combination of aggregate capabilities, and it marks first steps toward extreme-scale scientific software ecosystems from which future applications can be composed rapidly with assured quality and scalability.« less

Low-complexity camera digital signal imaging for video document projection system

NASA Astrophysics Data System (ADS)

Hsia, Shih-Chang; Tsai, Po-Shien

2011-04-01

We present high-performance and low-complexity algorithms for real-time camera imaging applications. The main functions of the proposed camera digital signal processing (DSP) involve color interpolation, white balance, adaptive binary processing, auto gain control, and edge and color enhancement for video projection systems. A series of simulations demonstrate that the proposed method can achieve good image quality while keeping computation cost and memory requirements low. On the basis of the proposed algorithms, the cost-effective hardware core is developed using Verilog HDL. The prototype chip has been verified with one low-cost programmable device. The real-time camera system can achieve 1270 × 792 resolution with the combination of extra components and can demonstrate each DSP function.

Managed behavioral healthcare in the private sector.

PubMed

Jeffrey, M; Riley, J

2000-09-01

Employers, in their search for cost containment and quality improvement, have driven the development of the behavioral health managed care vendor. More specifically, the behavioral health carve-out is an innovation that was developed to respond to employer and, more recently, health plan needs. Now that the product has matured, it is increasingly being asked to justify its existence. Costs have certainly been maintained, but improvements in quality have not always been evident. The issues the authors address include, as cost pressures continue, can the industry deliver on its promise to improve care? Will it need to evolve to yet another level, with new or different features?

Technologies to Support Community-Dwelling Persons With Dementia: A Position Paper on Issues Regarding Development, Usability, Effectiveness and Cost-Effectiveness, Deployment, and Ethics

PubMed Central

Innes, Anthea; Mountain, Gail; Robinson, Louise; van der Roest, Henriëtte; García-Casal, J Antonio; Gove, Dianne; Thyrian, Jochen René; Evans, Shirley; Dröes, Rose-Marie; Kelly, Fiona; Kurz, Alexander; Casey, Dympna; Szcześniak, Dorota; Dening, Tom; Craven, Michael P; Span, Marijke; Felzmann, Heike; Tsolaki, Magda; Franco-Martin, Manuel

2017-01-01

Background With the expected increase in the numbers of persons with dementia, providing timely, adequate, and affordable care and support is challenging. Assistive and health technologies may be a valuable contribution in dementia care, but new challenges may emerge. Objective The aim of our study was to review the state of the art of technologies for persons with dementia regarding issues on development, usability, effectiveness and cost-effectiveness, deployment, and ethics in 3 fields of application of technologies: (1) support with managing everyday life, (2) support with participating in pleasurable and meaningful activities, and (3) support with dementia health and social care provision. The study also aimed to identify gaps in the evidence and challenges for future research. Methods Reviews of literature and expert opinions were used in our study. Literature searches were conducted on usability, effectiveness and cost-effectiveness, and ethics using PubMed, Embase, CINAHL, and PsycINFO databases with no time limit. Selection criteria in our selected technology fields were reviews in English for community-dwelling persons with dementia. Regarding deployment issues, searches were done in Health Technology Assessment databases. Results According to our results, persons with dementia want to be included in the development of technologies; there is little research on the usability of assistive technologies; various benefits are reported but are mainly based on low-quality studies; barriers to deployment of technologies in dementia care were identified, and ethical issues were raised by researchers but often not studied. Many challenges remain such as including the target group more often in development, performing more high-quality studies on usability and effectiveness and cost-effectiveness, creating and having access to high-quality datasets on existing technologies to enable adequate deployment of technologies in dementia care, and ensuring that ethical issues are considered an important topic for researchers to include in their evaluation of assistive technologies. Conclusions Based on these findings, various actions are recommended for development, usability, effectiveness and cost-effectiveness, deployment, and ethics of assistive and health technologies across Europe. These include avoiding replication of technology development that is unhelpful or ineffective and focusing on how technologies succeed in addressing individual needs of persons with dementia. Furthermore, it is suggested to include these recommendations in national and international calls for funding and assistive technology research programs. Finally, practitioners, policy makers, care insurers, and care providers should work together with technology enterprises and researchers to prepare strategies for the implementation of assistive technologies in different care settings. This may help future generations of persons with dementia to utilize available and affordable technologies and, ultimately, to benefit from them. PMID:28582262

Beyond Participation: Do the Cost and Quality of Higher Education Shape the Enrollment Composition? The Case of Italy

ERIC Educational Resources Information Center

Pigini, Claudia; Staffolani, Stefano

2016-01-01

We analyze the effects of costs, geographical accessibility, and quality of higher education institutions on participation and on the composition of enrolled students, in terms of their educational and socioeconomic backgrounds. We develop a theoretical framework for higher education choices of secondary school graduates where differently talented…

Flip the tip: an automated, high quality, cost-effective patch clamp screen.

PubMed

Lepple-Wienhues, Albrecht; Ferlinz, Klaus; Seeger, Achim; Schäfer, Arvid

2003-01-01

The race for creating an automated patch clamp has begun. Here, we present a novel technology to produce true gigaseals and whole cell preparations at a high rate. Suspended cells are flushed toward the tip of glass micropipettes. Seal, whole-cell break-in, and pipette/liquid handling are fully automated. Extremely stable seals and access resistance guarantee high recording quality. Data obtained from different cell types sealed inside pipettes show long-term stability, voltage clamp and seal quality, as well as block by compounds in the pM range. A flexible array of independent electrode positions minimizes consumables consumption at maximal throughput. Pulled micropipettes guarantee a proven gigaseal substrate with ultra clean and smooth surface at low cost.

Cardiovascular disease prevention with a multidrug regimen in the developing world: a cost-effectiveness analysis

PubMed Central

Gaziano, Thomas A; Opie, Lionel H; Weinstein, Milton C

2008-01-01

Summary Background Cardiovascular disease is the leading cause of death, with 80% of cases occurring in developing countries. We therefore aimed to establish whether use of evidence-based multidrug regimens for patients at high risk for cardiovascular disease would be cost-effective in low-income and middle-income countries. Methods We used a Markov model to do a cost-effectiveness analysis with two combination regimens. For primary prevention, we used aspirin, a calcium-channel blocker, an angiotensin-converting-enzyme inhibitor, and a statin, and assessed them in four groups with different thresholds of absolute risks for cardiovascular disease. For secondary prevention, we assessed the same combination of drugs in one group, but substituted a β blocker for the calcium-channel blocker. To compare strategies, we report incremental cost-effectiveness ratios (ICER), in US$ per quality-adjusted life-year (QALY). Findings We recorded that preventive strategies could result in a 2-year gain in life expectancy. Across six developing World Bank regions, primary prevention yielded ICERs of US$746–890/QALY gained for patients with a 10-year absolute risk of cardiovascular disease greater than 25%, and $1039–1221/QALY gained for those with an absolute risk greater than 5%. ICERs for secondary prevention ranged from $306/QALY to $388/QALY gained. Interpretation Regimens of aspirin, two blood-pressure drugs, and a statin could halve the risk of death from cardiovascular disease in high-risk patients. This approach is cost-effective according to WHO recommendations, and is robust across several estimates of drug efficacy and of treatment cost. Developing countries should encourage the use of these inexpensive drugs that are currently available for both primary and secondary prevention. PMID:16920473

[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

PubMed

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

Using Quality of Student Life Indicators at Three Cooperating Colleges: The Cycles Survey.

ERIC Educational Resources Information Center

Royer, Paula Nassif; Kegan, Daniel

The problems of developing a low cost, quality institutional research program capable of longitudinal research, continuous broad bandwidth monitoring and data comparisons with other institutions, led to the development of the Hampshire Cycles Survey as an initial set of student quality of life indicators. Cycles is a multidimensional survey…

Preliminary development of an advanced modular pressure relief cushion: Testing and user evaluation.

PubMed

Freeto, Tyler; Mitchell, Steven J; Bogie, Kath M

2018-02-01

Effective pressure relief cushions are identified as a core assistive technology need by the World Health Organization Global Cooperation on Assistive Technology. High quality affordable wheelchair cushions could provide effective pressure relief for many individuals with limited access to advanced assistive technology. Value driven engineering (VdE) principles were employed to develop a prototype modular cushion. Low cost dynamically responsive gel balls were arranged in a close packed array and seated in bilayer foam for containment and support. Two modular cushions, one with high compliance balls and one with moderate compliance balls were compared with High Profile and Low Profile Roho ® and Jay ® Medical 2 cushions. ISO 16480-2 biomechanical standardized tests were applied to assess cushion performance. A preliminary materials cost analysis was carried out. A prototype modular cushion was evaluated by 12 participants who reported satisfaction using a questionnaire based on the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0) instrument. Overall the modular cushions performed better than, or on par with, the most widely prescribed commercially available cushions under ISO 16480-2 testing. Users rated the modular cushion highly for overall appearance, size and dimensions, comfort, safety, stability, ease of adjustment and general ease of use. Cost-analysis indicated that every modular cushion component a could be replaced several times and still maintain cost-efficacy over the complete cushion lifecycle. A VdE modular cushion has the potential provide effective pressure relief for many users at a low lifetime cost. Copyright © 2017. Published by Elsevier Ltd.

IT investments can add business value.

PubMed

Williams, Terry G

2002-05-01

Investment in information technology (IT) is costly, but necessary to enable healthcare organizations to improve their infrastructure and achieve other improvement initiatives. Such an investment is even more costly, however, if the technology does not appropriately enable organizations to perform business processes that help them accomplish their mission of providing safe, high-quality care cost-effectively. Before committing to a costly IT investment, healthcare organizations should implement a decision-making process that can help them choose, implement, and use technology that will provide sustained business value. A seven-step decision-making process that can help healthcare organizations achieve this result involves performing a gap analysis, assessing and aligning organizational goals, establishing distributed accountability, identifying linked organizational-change initiatives, determining measurement methods, establishing appropriate teams to ensure systems are integrated with multidisciplinary improvement methods, and developing a plan to accelerate adoption of the IT product.

[Cost-effectiveness analysis of universal screening for thyroid disease in pregnant women in Spain].

PubMed

Donnay Candil, Sergio; Balsa Barro, José Antonio; Álvarez Hernández, Julia; Crespo Palomo, Carlos; Pérez-Alcántara, Ferrán; Polanco Sánchez, Carlos

2015-01-01

To assess the cost-effectiveness of universal screening for thyroid disease in pregnant women in Spain as compared to high risk screening and no screening. A decision-analytic model comparing the incremental cost per quality-adjusted life year (QALY) of universal screening versus high risk screening and versus no screening. was used for the pregnancy and postpartum period. Probabilities from randomized controlled trials were considered for adverse obstetrical outcomes. A Markov model was used to assess the lifetime period after the first postpartum year and account for development of overt hypothyroidism. The main assumptions in the model and use of resources were assessed by local clinical experts. The analysis considered direct healthcare costs only. Universal screening gained .011 QALYs over high risk screening and .014 QALYS over no screening. Total direct costs per patient were €5,786 for universal screening, €5,791 for high risk screening, and €5,781 for no screening. Universal screening was dominant compared to risk-based screening and a very cost-effective alternative as compared to no screening. Use of universal screening instead of high risk screening would result in €2,653,854 annual savings for the Spanish National Health System. Universal screening for thyroid disease in pregnant women in the first trimester is dominant in Spain as compared to risk-based screening, and is cost-effective as compared to no screening (incremental cost-effectiveness ratio of €374 per QALY). Moreover, it allows diagnosing and treating cases of clinical and subclinical hypothyroidism that may not be detected when only high-risk women are screened. Copyright © 2014 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

A pilot cost-effectiveness analysis of treatments in newly diagnosed high-grade gliomas: the example of 5-aminolevulinic Acid compared with white-light surgery.

PubMed

Esteves, Susana; Alves, Marta; Castel-Branco, Marta; Stummer, Walter

2015-05-01

High-grade gliomas are aggressive, incurable tumors characterized by extensive diffuse invasion of the normal brain parenchyma. Novel therapies at best prolong survival; their costs are formidable and benefit is marginal. Economic restrictions thus require knowledge of the cost-effectiveness of treatments. Here, we show the cost-effectiveness of enhanced resections in malignant glioma surgery using a well-characterized tool for intraoperative tumor visualization, 5-aminolevulinic acid (5-ALA). To evaluate the cost-effectiveness of 5-ALA fluorescence-guided neurosurgery compared with white-light surgery in adult patients with newly diagnosed high-grade glioma, adopting the perspective of the Portuguese National Health Service. We used a Markov model (cohort simulation). Transition probabilities were estimated with the use of data from 1 randomized clinical trial and 1 noninterventional prospective study. Utility values and resource use were obtained from published literature and expert opinion. Unit costs were taken from official Portuguese reimbursement lists (2012 values). The health outcomes considered were quality-adjusted life-years, life-years, and progression-free life-years. Extensive 1-way and probabilistic sensitivity analyses were performed. The incremental cost-effectiveness ratios are below &OV0556;10 000 in all evaluated outcomes, being around &OV0556;9100 per quality-adjusted life-year gained, &OV0556;6700 per life-year gained, and &OV0556;8800 per progression-free life-year gained. The probability of 5-ALA fluorescence-guided surgery cost-effectiveness at a threshold of &OV0556;20000 is 96.0% for quality-adjusted life-year, 99.6% for life-year, and 98.8% for progression-free life-year. 5-ALA fluorescence-guided surgery appears to be cost-effective in newly diagnosed high-grade gliomas compared with white-light surgery. This example demonstrates cost-effectiveness analyses for malignant glioma surgery to be feasible on the basis of existing data.

Analysis of academic programs: comparing nursing and other university majors in the application of a quality, potential and cost model.

PubMed

Booker, Kathy; Hilgenberg, Cheryl

2010-01-01

Nursing is often considered expensive in the cost analysis of academic programs. Yet nursing programs have the power to attract many students, and the national nursing shortage has resulted in a high demand for nurses. Methods to systematically assess programs across an entire university academic division are often dissimilar in technique and outcome. At a small, private, Midwestern university, a model for comprehensive program assessment, titled the Quality, Potential and Cost (QPC) model, was developed and applied to each major offered at the university through the collaborative effort of directors, chairs, deans, and the vice president for academic affairs. The QPC model provides a means of equalizing data so that single measures (such as cost) are not viewed in isolation. It also provides a common language to ensure that all academic leaders at an institution apply consistent methods for assessment of individual programs. The application of the QPC model allowed for consistent, fair assessments and the ability to allocate resources to programs according to strategic direction. In this article, the application of the QPC model to School of Nursing majors and other selected university majors will be illustrated. Copyright 2010 Elsevier Inc. All rights reserved.

Targeted genotyping-by-sequencing permits cost-effective identification and discrimination of pasture grass species and cultivars.

PubMed

Pembleton, Luke W; Drayton, Michelle C; Bain, Melissa; Baillie, Rebecca C; Inch, Courtney; Spangenberg, German C; Wang, Junping; Forster, John W; Cogan, Noel O I

2016-05-01

A targeted amplicon-based genotyping-by-sequencing approach has permitted cost-effective and accurate discrimination between ryegrass species (perennial, Italian and inter-species hybrid), and identification of cultivars based on bulked samples. Perennial ryegrass and Italian ryegrass are the most important temperate forage species for global agriculture, and are represented in the commercial pasture seed market by numerous cultivars each composed of multiple highly heterozygous individuals. Previous studies have identified difficulties in the use of morphophysiological criteria to discriminate between these two closely related taxa. Recently, a highly multiplexed single nucleotide polymorphism (SNP)-based genotyping assay has been developed that permits accurate differentiation between both species and cultivars of ryegrasses at the genetic level. This assay has since been further developed into an amplicon-based genotyping-by-sequencing (GBS) approach implemented on a second-generation sequencing platform, allowing accelerated throughput and ca. sixfold reduction in cost. Using the GBS approach, 63 cultivars of perennial, Italian and interspecific hybrid ryegrasses, as well as intergeneric Festulolium hybrids, were genotyped. The genetic relationships between cultivars were interpreted in terms of known breeding histories and indistinct species boundaries within the Lolium genus, as well as suitability of current cultivar registration methodologies. An example of applicability to quality assurance and control (QA/QC) of seed purity is also described. Rapid, low-cost genotypic assays provide new opportunities for breeders to more fully explore genetic diversity within breeding programs, allowing the combination of novel unique genetic backgrounds. Such tools also offer the potential to more accurately define cultivar identities, allowing protection of varieties in the commercial market and supporting processes of cultivar accreditation and quality assurance.

An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

PubMed

Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

2016-01-01

The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously because its effect is evident in the final product. Moreover, quality frameworks and tools which require minimum time and cost are highly needed in these countries.

Effectiveness and cost-effectiveness of daily all-over-body application of emollient during the first year of life for preventing atopic eczema in high-risk children (The BEEP trial): protocol for a randomised controlled trial.

PubMed

Chalmers, Joanne R; Haines, Rachel H; Mitchell, Eleanor J; Thomas, Kim S; Brown, Sara J; Ridd, Matthew; Lawton, Sandra; Simpson, Eric L; Cork, Michael J; Sach, Tracey H; Bradshaw, Lucy E; Montgomery, Alan A; Boyle, Robert J; Williams, Hywel C

2017-07-21

Atopic eczema (AE) is a common skin problem that impairs quality of life and is associated with the development of other atopic diseases including asthma, food allergy and allergic rhinitis. AE treatment is a significant cost burden for health care providers. The purpose of the trial is to investigate whether daily application of emollients for the first year of life can prevent AE developing in high-risk infants (first-degree relative with asthma, AE or allergic rhinitis). This is a protocol for a pragmatic, two-arm, randomised controlled, multicentre trial. Up to 1400 term infants at high risk of developing AE will be recruited through the community, primary and secondary care in England. Participating families will be randomised in a 1:1 ratio to receive general infant skin-care advice, or general skin-care advice plus emollients with advice to apply daily to the infant for the first year of life. Families will not be blinded to treatment allocation. The primary outcome will be a blinded assessment of AE at 24 months of age using the UK Working Party Diagnostic Criteria for Atopic Eczema. Secondary outcomes are other definitions of AE, time to AE onset, severity of AE (EASI and POEM), presence of other allergic diseases including food allergy, asthma and hay fever, allergic sensitisation, quality of life, cost-effectiveness and safety of the emollients. Subgroup analyses are planned for the primary outcome according to filaggrin genotype and the number of first-degree relatives with AE and other atopic diseases. Families will be followed up by online and postal questionnaire at 3, 6, 12 and 18 months with a face-to-face visit at 24 months. Long-term follow-up until 60 months will be via annual questionnaires. This trial will demonstrate whether skin-barrier enhancement through daily emollient for the first year of life can prevent AE from developing in high-risk infants. If effective, this simple and cheap intervention has the potential to result in significant cost savings for health care providers throughout the world by preventing AE and possibly other associated allergic diseases. ISRCTN registry; ID: ISRCTN21528841 . Registered on 25 July 2014.

[How are consumers, service and market factors related to customer loyalty in medical service? Targeting the medical consumer in a city].

PubMed

Lee, Sunhee; Kim, Hyunmi; Kim, Juhye; Ha, Gwiyeom

2008-09-01

This study was performed to explore customer loyalty and the related factors. 900 households (a 1% sample) were randomly selected from the total population of K city located in Kangwon province. An interview survey was performed with using a structured questionnaire for the subjects (923 persons) who had used medical service during the year before the survey, and the survey was done September, 2002. When comparing the relating factors related with customer loyalty according to the sociodemographic characteristics, the older group showed a significantly higher level of recognition for service quality, service reputation, internal customers.attitudes and switching cost. The lower income group showed a higher level of recognition for service quality, service image and switching cost. The lower educated group showed a higher level of recognition for service reputation, service image and internal customers.attitudes. The higher educated group showed a higher level of recognition for perceived risk, and seeking variety. In addition, the expert group or the service and manufacturing workers group showed a higher level of recognition for service involvement. On multiple regression analysis, internal customers' attitudes, service image, service reputation, service quality, switching cost, and substitutability showed significant relations with customer loyalty. This study showed that customer loyalty was significantly influenced by service factors like internal customers' attitudes, service image, service reputation, and service quality, and by market factors like switching cost, and substitutability. The results of this study can be used as a baseline for developing strategies to create and keep customers with high loyalty.

[Assessment of financial performance improves the quality of healthcare provided by medical organizations].

PubMed

Afek, Arnon; Meilik, Ahuva; Rotstein, Zeev

2009-01-01

Today, medical organizations have to contend with a highly competitive environment, an atmosphere saturated with a multitude of innovative new technologies and ever-increasing costs. The ability of these organizations to survive and to develop and expand their services mandates adoption of management guidelines based on the world of finance/commerce, adapted to make them relevant to the world of medical service. In this article the authors chose to present a management administration assessment which is a process that ensures that the management will effectively administer the organization's resources, and meet the goals set by the organization. The system demands that hospital "centers of responsibility" be defined, a management information system be set up, activities be priced, budget be defined and the expenses assessed. These processes make it possible to formulate a budget and assess any possible deviation between the budget and the actual running costs. An assessment of deviations will reveal any possible deviation of the most significant factor--efficiency. Medical organization managers, with the cooperation of the directors of the "centers of responsibility", can assess subunit activities and gain an understanding of the significance of management decisions and thus improve the quality of management, and the medical organization. The goal of this management system is not only to Lower costs and to meet the financial goals that were set; it is a tool that ensures quality. Decreasing expenditure is important in this case, but is only secondary in importance and will be a result of reducing the costs incurred by services lacking in quality.

Performance measurement: integrating quality management and activity-based cost management.

PubMed

McKeon, T

1996-04-01

The development of an activity-based management system provides a framework for developing performance measures integral to quality and cost management. Performance measures that cross operational boundaries and embrace core processes provide a mechanism to evaluate operational results related to strategic intention and internal and external customers. The author discusses this measurement process that allows managers to evaluate where they are and where they want to be, and to set a course of action that closes the gap between the two.

Preventing type 2 diabetes: systematic review of studies of cost-effectiveness of lifestyle programmes and metformin, with and without screening, for pre-diabetes

PubMed Central

Roberts, Samantha; Barry, Eleanor; Craig, Dawn; Airoldi, Mara; Bevan, Gwyn; Greenhalgh, Trisha

2017-01-01

Objective Explore the cost-effectiveness of lifestyle interventions and metformin in reducing subsequent incidence of type 2 diabetes, both alone and in combination with a screening programme to identify high-risk individuals. Design Systematic review of economic evaluations. Data sources and eligibility criteria Database searches (Embase, Medline, PreMedline, NHS EED) and citation tracking identified economic evaluations of lifestyle interventions or metformin alone or in combination with screening programmes in people at high risk of developing diabetes. The International Society for Pharmaco-economics and Outcomes Research’s Questionnaire to Assess Relevance and Credibility of Modelling Studies for Informing Healthcare Decision Making was used to assess study quality. Results 27 studies were included; all had evaluated lifestyle interventions and 12 also evaluated metformin. Primary studies exhibited considerable heterogeneity in definitions of pre-diabetes and intensity and duration of lifestyle programmes. Lifestyle programmes and metformin appeared to be cost effective in preventing diabetes in high-risk individuals (median incremental cost-effectiveness ratios of £7490/quality-adjusted life-year (QALY) and £8428/QALY, respectively) but economic estimates varied widely between studies. Intervention-only programmes were in general more cost effective than programmes that also included a screening component. The longer the period evaluated, the more cost-effective interventions appeared. In the few studies that evaluated other economic considerations, budget impact of prevention programmes was moderate (0.13%–0.2% of total healthcare budget), financial payoffs were delayed (by 9–14 years) and impact on incident cases of diabetes was limited (0.1%–1.6% reduction). There was insufficient evidence to answer the question of (1) whether lifestyle programmes are more cost effective than metformin or (2) whether low-intensity lifestyle interventions are more cost effective than the more intensive lifestyle programmes that were tested in trials. Conclusions The economics of preventing diabetes are complex. There is some evidence that diabetes prevention programmes are cost effective, but the evidence base to date provides few clear answers regarding design of prevention programmes because of differences in denominator populations, definitions, interventions and modelling assumptions. PMID:29146638

A Quadrupole Dalton-based multi-attribute method for product characterization, process development, and quality control of therapeutic proteins.

PubMed

Xu, Weichen; Jimenez, Rod Brian; Mowery, Rachel; Luo, Haibin; Cao, Mingyan; Agarwal, Nitin; Ramos, Irina; Wang, Xiangyang; Wang, Jihong

2017-10-01

During manufacturing and storage process, therapeutic proteins are subject to various post-translational modifications (PTMs), such as isomerization, deamidation, oxidation, disulfide bond modifications and glycosylation. Certain PTMs may affect bioactivity, stability or pharmacokinetics and pharmacodynamics profile and are therefore classified as potential critical quality attributes (pCQAs). Identifying, monitoring and controlling these PTMs are usually key elements of the Quality by Design (QbD) approach. Traditionally, multiple analytical methods are utilized for these purposes, which is time consuming and costly. In recent years, multi-attribute monitoring methods have been developed in the biopharmaceutical industry. However, these methods combine high-end mass spectrometry with complicated data analysis software, which could pose difficulty when implementing in a quality control (QC) environment. Here we report a multi-attribute method (MAM) using a Quadrupole Dalton (QDa) mass detector to selectively monitor and quantitate PTMs in a therapeutic monoclonal antibody. The result output from the QDa-based MAM is straightforward and automatic. Evaluation results indicate this method provides comparable results to the traditional assays. To ensure future application in the QC environment, this method was qualified according to the International Conference on Harmonization (ICH) guideline and applied in the characterization of drug substance and stability samples. The QDa-based MAM is shown to be an extremely useful tool for product and process characterization studies that facilitates facile understanding of process impact on multiple quality attributes, while being QC friendly and cost-effective.

Issues in formulary management: therapeutic interchange. The value, cost, and quality of therapeutic interchange.

PubMed

Mahoney, C D

1992-10-01

Therapeutic interchange is a process of substituting a prescribed medication with one that offers therapeutic and cost benefits. The practice not only provides short-term savings but also is associated with decreases in lengths of stay in hospitals and total hospital drug expenses. There may be medicolegal implications when FDA-approved indications differ for interchanged drugs. The potential for liability is decreased when a standard of care is met, but since standards can change, guidelines should be reviewed regularly. High-tech, high-cost drugs are sometimes appropriate for therapeutic interchange. Pharmacy and therapeutics committees should assure best value by considering indirect expenses, quality, and therapeutic outcome, as well as product cost. Therapeutic interchange programs enable pharmacy managers to neutralize or at least slow the rate of drug cost increases, ensuring appropriate utilization of resources and more favorable patient outcomes.

Cost-effectiveness analysis of online hemodiafiltration versus high-flux hemodialysis.

PubMed

Ramponi, Francesco; Ronco, Claudio; Mason, Giacomo; Rettore, Enrico; Marcelli, Daniele; Martino, Francesca; Neri, Mauro; Martin-Malo, Alejandro; Canaud, Bernard; Locatelli, Francesco

2016-01-01

Clinical studies suggest that hemodiafiltration (HDF) may lead to better clinical outcomes than high-flux hemodialysis (HF-HD), but concerns have been raised about the cost-effectiveness of HDF versus HF-HD. Aim of this study was to investigate whether clinical benefits, in terms of longer survival and better health-related quality of life, are worth the possibly higher costs of HDF compared to HF-HD. The analysis comprised a simulation based on the combined results of previous published studies, with the following steps: 1) estimation of the survival function of HF-HD patients from a clinical trial and of HDF patients using the risk reduction estimated in a meta-analysis; 2) simulation of the survival of the same sample of patients as if allocated to HF-HD or HDF using three-state Markov models; and 3) application of state-specific health-related quality of life coefficients and differential costs derived from the literature. Several Monte Carlo simulations were performed, including simulations for patients with different risk profiles, for example, by age (patients aged 40, 50, and 60 years), sex, and diabetic status. Scatter plots of simulations in the cost-effectiveness plane were produced, incremental cost-effectiveness ratios were estimated, and cost-effectiveness acceptability curves were computed. An incremental cost-effectiveness ratio of €6,982/quality-adjusted life years (QALY) was estimated for the baseline cohort of 50-year-old male patients. Given the commonly accepted threshold of €40,000/QALY, HDF is cost-effective. The probabilistic sensitivity analysis showed that HDF is cost-effective with a probability of ~81% at a threshold of €40,000/QALY. It is fundamental to measure the outcome also in terms of quality of life. HDF is more cost-effective for younger patients. HDF can be considered cost-effective compared to HF-HD.