Structure and Distribution of Components in the Working Layer Upon Reconditioning of Parts by Electric-Arc Metallization

NASA Astrophysics Data System (ADS)

Skoblo, T. S.; Vlasovets, V. M.; Moroz, V. V.

2001-11-01

Reliable data on the structure of the deposited layer are very important due to the considerable instability of the process of deposition of coatings by the method of electric-arc metallization and the strict requirements for reconditioned crankshafts. The present paper is devoted to the structure of coatings obtained from powder wire based on ferrochrome-aluminum with additional alloying elements introduced into the charge.

Post Flight Reconditioning for US Astronauts Returning from the International Space Station

NASA Technical Reports Server (NTRS)

Nieschwitz, Bruce; Guilliams, Mark E.; Hoellen, David; Loehr, Jim

2011-01-01

Prior to spaceflight, each astronaut undergoes medical requirement testing to establish a preflight baseline for physiologic functions. Astronauts returning from the International Space Station can experience deficits in all or some of the following areas: aerobic capacity, muscular strength, power, endurance, stamina, bone, balance, agility, coordination, orthostatic tolerances, proprioception, neurovestibular function and flexibility. These losses occur from living in microgravity and are consistent with deficits seen in terrestrial, de-conditioning individuals. Since 2001, the Astronaut Strength, Conditioning and Rehabilitation (ASCR) specialists have administered a reconditioning program, focusing on all deficits, which improves the physical condition of all returning astronauts. In most cases, astronauts have reached or surpassed their preflight physical condition. Purpose: This presentation will describe and explain the postflight reconditioning program for returning astronauts. Methods: The postflight reconditioning program is designed to stress the body systems that affect the following: aerobic capacity, muscular strength, power, endurance, stamina, bone, balance, agility, coordination, orthostatic tolerances, proprioception, neurovestibular function and flexibility. Postflight reconditioning begins on landing day, is scheduled for two hours per day, 7 days a week for 45 days and is tailored to the specific needs of the astronaut. Initially the program focuses on basic ambulation, cardiovascular endurance, strength, balance, flexibility and proprioception. The program advances through 45 days and specific attention is given to each astronaut s overall condition, testing results, medical status, and assigned duties after their mission. Conclusion: Astronauts will experience noticeable deficits in their physical condition after living in microgravity for an extended length of time. After completing postflight reconditioning, it is shown that astronauts have regained, and in most cases improved upon, their preflight baseline condition.

Comparative assessment of different recycling methods of orthodontic brackets for clinical use.

PubMed

de Oliveira Correia, Ayla M; de Souza Matos, Felipe; Pilli Jóias, Renata; de Mello Rode, Sigmar; Cesar, Paulo F; Paranhos, Luiz R

2017-06-01

This study aimed to assess bond strength of the resin/bracket interface, under in-vitro shear stress, of metal brackets recycled by different clinical protocols. Sixty stainless steel orthodontic brackets were bonded on acrylic resin. The Transbond XT™ resin was applied at the base of the bracket aided by a matrix, obtaining 1 mm of thickness, and photoactivated with a LED device (40 s; 500 mW/cm2). Samples were randomly divided into four groups (N.=15) according to the reconditioning/recycling protocol: aluminum oxide (AO) 90 µm; hydrofluoric acid 60 s (HA60); hydrofluoric acid 120 s (HA120); hydrofluoric acid 60 s + silane (HA60S). After recycling, the resin was applied at the base of the bracket for shear testing in a universal testing machine (0.5 mm/min). After reconditioning/recycling, the surfaces were analyzed by Scanning Electron Microscopy. Data obtained after the shear test were subjected to ANOVA and Tukey's test (P<0.05). The AO group presented higher values of shear bond strength compared to the other reconditioning/recycling protocols (P<0.05). The HA120 and HA60S groups presented statistically similar results, but HA120 presented strength below the recommended limit. The recycling technique by aluminum oxide sandblasting was more effective for reconditioning orthodontic brackets when compared to the other protocols. The reconditioning technique with 10% hydrofluoric acid followed by the application of silane bonding agent may be used as an alternative protocol.

NiH2 Battery Reconditioning for LEO Applications

NASA Technical Reports Server (NTRS)

Armantrout, J. D.; Hafen, D. P.

1997-01-01

This paper summarizes reasons for and benefits of reconditioning nickel-hydrogen (NiH2) batteries used for Low Earth Orbit (LEO) applications. NiH2 battery cells do not have the classic discharge voltage problems more commonly associated with nickel-cadmium (NiCd) cells. This is due, in part, to use of hydrogen electrodes in place of cadmium electrodes. The nickel electrode, however, does have a similar discharge voltage signature for both cell designs. This can have an impact on LEO applications where peak loads at higher relative depths of discharge can impact operations. Periodic reconditioning provides information which can be used for analyzing long term performance trends to predict usable capacity to a specified voltage level. The reconditioning process described herein involves discharging NiH2 batteries at C/20 rates or less, to an average cell voltage of 1.0 volts or less. Recharge is performed at nominal C/5 rates to specified voltage/temperature (V/T) charge levels selected to restore required capacity with minimal overcharge. Reconditioning is a process of restoring reserve capacity lost on cycling, which is commonly called the memory effect in NiCd cells. This effect is characterized by decreases in the discharge voltage curve with operational life and cycling. The end effect of reconditioning NiH2 cells may be hidden in the versatility, of that design over the NiCd cell design and its associated negative electrode fading problem. The process of deep discharge at lower rates by way of reconditioning tends to redistribute electrolyte and water in the NiH2 cell electrode stack, while improving utilization and charge efficiency. NiH2 battery reconditioning effects on life are considered beneficial and may, in fact. extend life based on NiCd experience. In any case, usable capacity data obtained from reconditioning is required for performance evaluation and trend analysis. Characterization and life tests have provided the historical data base used to determine the need for reconditioning in most battery applications. The following sections briefly describe the background of NiH2 battery reconditioning and testing at Lockheed Martin Missiles & Space (LMMS) and other aerospace companies.

Overview of Pre-Flight Physical Training, In-Flight Exercise Countermeasures and the Post-Flight Reconditioning Program for International Space Station Astronauts

NASA Technical Reports Server (NTRS)

Kerstman, Eric

2011-01-01

International Space Station (ISS) astronauts receive supervised physical training pre-flight, utilize exercise countermeasures in-flight, and participate in a structured reconditioning program post-flight. Despite recent advances in exercise hardware and prescribed exercise countermeasures, ISS crewmembers are still found to have variable levels of deconditioning post-flight. This presentation provides an overview of the astronaut medical certification requirements, pre-flight physical training, in-flight exercise countermeasures, and the post-flight reconditioning program. Astronauts must meet medical certification requirements on selection, annually, and prior to ISS missions. In addition, extensive physical fitness testing and standardized medical assessments are performed on long duration crewmembers pre-flight. Limited physical fitness assessments and medical examinations are performed in-flight to develop exercise countermeasure prescriptions, ensure that the crewmembers are physically capable of performing mission tasks, and monitor astronaut health. Upon mission completion, long duration astronauts must re-adapt to the 1 G environment, and be certified as fit to return to space flight training and active duty. A structured, supervised postflight reconditioning program has been developed to prevent injuries, facilitate re-adaptation to the 1 G environment, and subsequently return astronauts to training and space flight. The NASA reconditioning program is implemented by the Astronaut Strength, Conditioning, and Rehabilitation (ASCR) team and supervised by NASA flight surgeons. This program has evolved over the past 10 years of the International Space Station (ISS) program and has been successful in ensuring that long duration astronauts safely re-adapt to the 1 g environment and return to active duty. Lessons learned from this approach to managing deconditioning can be applied to terrestrial medicine and future exploration space flight missions.

7 CFR 996.50 - Reconditioning failing quality peanuts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Reconditioning failing quality peanuts. 996.50 Section... QUALITY AND HANDLING STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Quality and Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been...

7 CFR 996.50 - Reconditioning failing quality peanuts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Reconditioning failing quality peanuts. 996.50 Section... QUALITY AND HANDLING STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Quality and Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been...

19 CFR 19.32 - Wheat manipulation; reconditioning.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Wheat manipulation; reconditioning. 19.32 Section... Bonded for the Storage of Wheat § 19.32 Wheat manipulation; reconditioning. (a) The mixing, blending, or commingling of imported wheat and domestic wheat, or of imported wheat of different classes and grades, as an...

Battery life test using reconditioning

NASA Technical Reports Server (NTRS)

Sparks, R. H.

1977-01-01

A discussion is presented on nickel cadmium battery life tests using reconditioning and some comparative tests not using reconditioning. The discussion is aimed at the program application part of the testing. The goals of the program were to get an increased utilization out of the battery system in geosynchronous orbit. An attempt was made to push the depth of discharge operation up around 80 to 85 percent and the intent with the reconditioning program was to extend this type of utilization out towards a 10-year life and attune the voltage regulation.

Deep Discharge Reconditioning and Shorted Storage of Batteries. [nickel cadmium batteries

NASA Technical Reports Server (NTRS)

Ritterman, P. F.

1982-01-01

The identification and measurement of hydrogen recombination in sealed nickel-cadium cells makes deep reconditioning on a battery basis safe and feasible. Deep reconditioning improves performance and increases life of nickel-cadium batteries in geosynchronous orbit applications. The hydrogen mechanism and supporting data are presented. Parameter cell design experiments are described which led to the definition of nickel-cadium cells capable of high rate overdischarge without detriment to specific energy. Nickel-cadium calls of identical optimum design were successfully cycled for 7 seasons in simulation of geosynchronous orbit at 75 percent depth-of-discharge with extensive midseason and end-of-season overdischarge at rates varying from C/20 to C/4. Destructive physical analysis and cyclin data indicated no deterioration or the development of dangerous pressures as a result of the cycling with overdischarge.

7 CFR 996.50 - Reconditioning failing quality peanuts.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Reconditioning failing quality peanuts. 996.50 Section... Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been... peanuts failing to meet the applicable outgoing quality standards in the table in § 996.31(a). If, after...

7 CFR 996.50 - Reconditioning failing quality peanuts.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Reconditioning failing quality peanuts. 996.50 Section... Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been... peanuts failing to meet the applicable outgoing quality standards in the table in § 996.31(a). If, after...

7 CFR 996.50 - Reconditioning failing quality peanuts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Reconditioning failing quality peanuts. 996.50 Section... Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been... peanuts failing to meet the applicable outgoing quality standards in the table in § 996.31(a). If, after...

A nickel-cadmium battery reconditioning circuit

NASA Technical Reports Server (NTRS)

Lanier, R.

1977-01-01

The circuit presented is simple and small enough to be included in a typical battery charge/power control assembly, yet provides the advantage of a complete ground-type battery reconditioning discharge. Test results on the circuit when used to recondition two 24 cell, 20 A-h nickel-cadmium batteries are given. These results show that a battery reconditioned with this circuit returns to greater than 90 percent of its original capacity (greater than nameplate capacity) and follows a typical new battery degradation curve even after over 20,000 simulated orbital cycles for a 4 year period. Applications of the circuit are considered along with recommendations relative to its use. Its application in low voltage (22 to 36 Vdc) power systems and in high voltage (100 to 150 Vdc) power systems is discussed. The implications are that the high voltage systems have a greater need for battery reconditioning than their low voltage counterparts, and that using these circuit techniques, the expected life of a battery in low Earth orbit can be up to 5 years.

Viking lander battery performance, degradation, and reconditioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britting, A.O. Jr.

1981-01-01

On July 20 and September 3, 1976, Viking Landers 1 and 2 touched down on the surface of Mars. Prior to launch each lander, including its batteries was subjected to a sterilization temperature of 233 F for 54 hours. The results of battery performance, degradation and reconditioning are presented, including charge/discharge cycles, reconditioning technique, temperature history, early and current capacity. A brief description of the power system operation is also included.

The Effects of In-Office Reconditioning on the Slot Dimensions and Static Frictional Resistance of Stainless Steel Brackets.

PubMed

Iluru, Rohini; Nellore, Chaitanya; Karnati, Praveen Kumar Reddy; Thalapaneni, Ashok Kumar; Myla, Vijay Bhaskar; Ramyasree, Konda; Prasad, Mandava

2016-01-01

Orthodontists are commonly faced with the decision of what to do with loose brackets, and with inaccurately located brackets that need repositioning during treatment. One solution is to recycle the brackets. The potential effects of reconditioning a bracket are dependent upon many factors which may result in physical changes like alteration in slot tolerance, which may influence sliding mechanics by affecting frictional resistance. To study and compare the dimensional changes in the bracket slot width and depth in reconditioned brackets from unused brackets under scanning electronic microscope and to study and compare any consequent effects on the static frictional resistance of stainless steel brackets after reconditioning and in unused brackets. Dentarum manufactured 90 stainless steel central incisors edgewise brackets of size 0.22 X 0.030″ inch and 0° tip and 0°angulation were taken. 60 samples for measuring frictional resistance and 30 samples for measuring slot dimensions. Ortho organizers manufactured stainless steel arch wires 0.019 X 0.025″ straight lengths 60 in number were considered for measuring static frictional resistance. The mean slot width and depth of new brackets were 0.0251″ and 0.0471″, which exceeded the manufacturers reported nominal size of 0.022″ X 0.030″, by 0.003″ and 0.017″. The reconditioned brackets demonstrated a further increase in mean slot width and depth to 0.028″ and 0.0518″ that is by 0.0035″ and 0.0047″ which is statistically significant (p=0.001, 0.002). The mean static frictional forces of the reconditioned brackets was nearly similar to that of new brackets that is 0.3167N for reconditioned brackets and 0.2613 N for new brackets. Although the reconditioning process results in physical changes to bracket structure this does not appear to result in significant effect on ex-vivo static frictional resistance.

Physicochemical Quality and Chemical Safety of Chlorine as a Reconditioning Agent and Wash Water Disinfectant for Fresh-Cut Lettuce Washing

PubMed Central

Van Haute, Sam; Holvoet, Kevin; Uyttendaele, Mieke

2013-01-01

Chlorine was assessed as a reconditioning agent and wash water disinfectant in the fresh-cut produce industry. Artificial fresh-cut lettuce wash water, made from butterhead lettuce, was used for the experiments. In the reconditioning experiments, chlorine was added to artificial wash water inoculated with Escherichia coli O157 (6 log CFU/ml). Regression models were constructed based on the inactivation data and validated in actual wash water from leafy vegetable processing companies. The model that incorporated chlorine dose and chemical oxygen demand (COD) of the wash water accurately predicted inactivation. Listeria monocytogenes was more resistant to chlorine reconditioning in artificial wash water than Salmonella spp. and Escherichia coli O157. During the washing process with inoculated lettuce (4 log CFU/g), in the absence of chlorine, there was a rapid microbial buildup in the water that accumulated to 5.4 ± 0.4 log CFU/100 ml after 1 h. When maintaining a residual concentration of 1 mg/liter free chlorine, wash water contamination was maintained below 2.7, 2.5, and 2.5 log CFU/100 ml for tap water and artificial process water with COD values of 500 and 1,000 mg O2/liter, respectively. A model was developed to predict water contamination during the dynamic washing process. Only minor amounts of total trihalomethanes were formed in the water during reconditioning. Total trihalomethanes accumulated to larger amounts in the water during the wash water disinfection experiments and reached 124.5 ± 13.4 μg/liter after 1 h of execution of the washing process in water with a COD of 1,000 mg O2/liter. However, no total trihalomethanes were found on the fresh-cut lettuce after rinsing. PMID:23396332

Physicochemical quality and chemical safety of chlorine as a reconditioning agent and wash water disinfectant for fresh-cut lettuce washing.

PubMed

Van Haute, Sam; Sampers, Imca; Holvoet, Kevin; Uyttendaele, Mieke

2013-05-01

Chlorine was assessed as a reconditioning agent and wash water disinfectant in the fresh-cut produce industry. Artificial fresh-cut lettuce wash water, made from butterhead lettuce, was used for the experiments. In the reconditioning experiments, chlorine was added to artificial wash water inoculated with Escherichia coli O157 (6 log CFU/ml). Regression models were constructed based on the inactivation data and validated in actual wash water from leafy vegetable processing companies. The model that incorporated chlorine dose and chemical oxygen demand (COD) of the wash water accurately predicted inactivation. Listeria monocytogenes was more resistant to chlorine reconditioning in artificial wash water than Salmonella spp. and Escherichia coli O157. During the washing process with inoculated lettuce (4 log CFU/g), in the absence of chlorine, there was a rapid microbial buildup in the water that accumulated to 5.4 ± 0.4 log CFU/100 ml after 1 h. When maintaining a residual concentration of 1 mg/liter free chlorine, wash water contamination was maintained below 2.7, 2.5, and 2.5 log CFU/100 ml for tap water and artificial process water with COD values of 500 and 1,000 mg O2/liter, respectively. A model was developed to predict water contamination during the dynamic washing process. Only minor amounts of total trihalomethanes were formed in the water during reconditioning. Total trihalomethanes accumulated to larger amounts in the water during the wash water disinfection experiments and reached 124.5 ± 13.4 μg/liter after 1 h of execution of the washing process in water with a COD of 1,000 mg O2/liter. However, no total trihalomethanes were found on the fresh-cut lettuce after rinsing.

The role of physiotherapy in the European Space Agency strategy for preparation and reconditioning of astronauts before and after long duration space flight.

PubMed

Lambrecht, Gunda; Petersen, Nora; Weerts, Guillaume; Pruett, Casey; Evetts, Simon; Stokes, Maria; Hides, Julie

2017-01-01

Spaceflight and exposure to microgravity have wide-ranging effects on many systems of the human body. At the European Space Agency (ESA), a physiotherapist plays a key role in the multidisciplinary ESA team responsible for astronaut health, with a focus on the neuro-musculoskeletal system. In conjunction with a sports scientist, the physiotherapist prepares the astronaut for spaceflight, monitors their exercise performance whilst on the International Space Station (ISS), and reconditions the astronaut when they return to Earth. This clinical commentary outlines the physiotherapy programme, which was developed over nine long-duration missions. Principles of physiotherapy assessment, clinical reasoning, treatment programme design (tailored to the individual) and progression of the programme are outlined. Implications for rehabilitation of terrestrial populations are discussed. Evaluation of the reconditioning programme has begun and challenges anticipated after longer missions, e.g. to Mars, are considered. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reconditioning of Batteries on the International Space Station

NASA Technical Reports Server (NTRS)

Hajela, Gyan; Cohen, Fred; Dalton, Penni

2004-01-01

Primary source of electric power for the International Space Station (ISS) is the photovoltaic module (PVM). At assembly complete stage, the ISS will be served by 4 PVMs. Each PVM contains two independent power channels such that one failure will result in loss of only one power channel. During early stages of assembly, the ISS is served by only one PVM designated as P6. Solar arrays are used to convert solar flux into electrical power. Nickel hydrogen batteries are used to store electrical power for use during periods when the solar input is not adequate to support channel loads. Batteries are operated per established procedures that ensure that they are maintained within specified temperature limits, charge current is controlled to conform to a specified charge profile, and battery voltages are maintained within specified limits. Both power channels on the PVM P6 have been operating flawlessly since December 2000 with 100 percent power availability. All components, including batteries, are monitored regularly to ensure that they are operating within specified limits and to trend their wear out and age effects. The paper briefly describes the battery trend data. Batteries have started to show some effects of aging and a battery reconditioning procedure is being evaluated at this time. Reconditioning is expected to reduce cell voltage divergence and provide data that can be used to update the state of charge (SOC) computation in the software to account for battery age. During reconditioning, each battery, one at a time, will be discharged per a specified procedure and then returned to a full state of charge. The paper describes the reconditioning procedure and the expected benefits. The reconditioning procedures have been thoroughly coordinated by all affected technical teams and approved by all required boards. The reconditioning is tentatively scheduled for September 2004.

41 CFR 101-45.003 - Vehicle reconditioning.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value... or black tire paint to all tires; (ii) Wash and blacken wheel splash shields; (iii) Apply touch-up...

41 CFR 101-45.003 - Vehicle reconditioning.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value... or black tire paint to all tires; (ii) Wash and blacken wheel splash shields; (iii) Apply touch-up...

41 CFR 101-45.003 - Vehicle reconditioning.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value... or black tire paint to all tires; (ii) Wash and blacken wheel splash shields; (iii) Apply touch-up...

41 CFR 101-45.003 - Vehicle reconditioning.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value... or black tire paint to all tires; (ii) Wash and blacken wheel splash shields; (iii) Apply touch-up...

41 CFR 101-45.003 - Vehicle reconditioning.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value... or black tire paint to all tires; (ii) Wash and blacken wheel splash shields; (iii) Apply touch-up...

The INTELSAT Experience with Reconditioning of NiH2 Batteries

NASA Technical Reports Server (NTRS)

Scalici, Frank; Dunnet, Andrew; Xu, Daphne

1997-01-01

INTELSAT has been reconditioning NiH2 batteries since 1983 when the INTELSAT V F-6 geosynchronous communications satellite was launched. This was the first commercial use of NiH2 batteries. INTELSAT has continued this practice on all 46 NiH2 batteries it has operated in-orbit. The batteries are of several types including the classic INTELSAT cell, the HAC re-circulating design, and the Gates Mantech design. Reconditioning is performed twice each year, prior to the Eclipse Season. At this time Water Migration problems, if present, are dealt with. Temperature limits are imposed for the discharge and charge cycles as a safety precaution. In support of in-orbit operations, it is INTELSAT's practice to perform ground based life tests. In-orbit data and ground tests results are presented and the benefits of reconditioning noted.

Use of a portable tower and remote-controlled launcher to improve physical conditioning in a rehabilitating wild mallard (Anas platyrhynchos).

PubMed

Pollard-Wright, Holly M; Wright, Mark T; Warren, Jeffrey M

2010-12-01

Prerelease reconditioning improves the chance of survival of rehabilitating raptors. Reconditioning may also help to rehabilitate waterfowl, including those that are threatened or endangered, especially if the birds are released during periods of migration. A flying harness, creance, remote-controlled launcher, and portable tower were used to create a means of reconditioning a rehabilitating 5-month-old female wild mallard duck (Anas platyrhynchos) that had been housed in a rehabilitation center for 7 weeks while recovering from an injury. Pre- and postflight serum lactate levels, body condition index scores, and controlled flight distances were used to assess the bird's degree of conditioning. Postflight serum lactate levels never returned to preflight levels and were not deemed a reliable indicator of physical fitness. However, the mallard showed an increase in endurance and strength as well as improved body condition index scores over the course of the reconditioning program.

NASA Musculoskeletal Space Medicine and Reconditioning Program

NASA Technical Reports Server (NTRS)

Kerstman, Eric; Scheuring, Richard

2011-01-01

The Astronaut Strength, Conditioning, and Rehabilitation (ASCR) group is comprised of certified strength and conditioning coaches and licensed and certified athletic trainers. The ASCR group works within NASA s Space Medicine Division providing direction and supervision to the astronaut corp with regards to physical readiness throughout all phases of space flight. The ASCR group is overseen by flight surgeons with specialized training in sports medicine or physical medicine and rehabilitation. The goals of the ASCR group include 1) designing and administering strength and conditioning programs that maximize the potential for physical performance while minimizing the rate of injury, 2) providing appropriate injury management and rehabilitation services, 3) collaborating with medical, research, engineering, and mission operations groups to develop and implement safe and effective in-flight exercise countermeasures, and 4) providing a structured, individualized post-flight reconditioning program for long duration crew members. This Panel will present the current approach to the management of musculoskeletal injuries commonly seen within the astronaut corp and will present an overview of the pre-flight physical training, in-flight exercise countermeasures, and post-flight reconditioning program for ISS astronauts.

INTERMINGLED SKIN GRAFTING: A VALID TRANSPLANTATION METHOD AT LOW COST

PubMed Central

Domres, B.; Kistler, D.; Rutczynska, J.

2007-01-01

Summary The almost forgotten method of intermingled skin grafting of allogeneic material with small autogeneic islets, once developed in the People's Republic of China, proves the feasibility of permanent healing of even extensive burn wounds, at low cost, and therefore an effective treatment possibility in poorer countries, as well as under conditions of a burn disaster. Intermingled skin grafting obtains a better elasticity of the reconditioned skin as elastic fibres of the allodermis survive, and this results in fewer contractures. From the cosmetic point of view the transplantation of autologous keratinocytes results in a better aesthetic homogeneous texture. PMID:21991087

Treating Sample Covariances for Use in Strongly Coupled Atmosphere-Ocean Data Assimilation

NASA Astrophysics Data System (ADS)

Smith, Polly J.; Lawless, Amos S.; Nichols, Nancy K.

2018-01-01

Strongly coupled data assimilation requires cross-domain forecast error covariances; information from ensembles can be used, but limited sampling means that ensemble derived error covariances are routinely rank deficient and/or ill-conditioned and marred by noise. Thus, they require modification before they can be incorporated into a standard assimilation framework. Here we compare methods for improving the rank and conditioning of multivariate sample error covariance matrices for coupled atmosphere-ocean data assimilation. The first method, reconditioning, alters the matrix eigenvalues directly; this preserves the correlation structures but does not remove sampling noise. We show that it is better to recondition the correlation matrix rather than the covariance matrix as this prevents small but dynamically important modes from being lost. The second method, model state-space localization via the Schur product, effectively removes sample noise but can dampen small cross-correlation signals. A combination that exploits the merits of each is found to offer an effective alternative.

FILTER TREATMENT

DOEpatents

Sutton, J.B.; Torrey, J.V.P.

1958-08-26

A process is described for reconditioning fused alumina filters which have become clogged by the accretion of bismuth phosphate in the filter pores, The method consists in contacting such filters with faming sulfuric acid, and maintaining such contact for a substantial period of time.

Condition-Based Conveyor Belt Replacement Strategy in Lignite Mines with Random Belt Deterioration

NASA Astrophysics Data System (ADS)

Blazej, Ryszard; Jurdziak, Leszek

2017-12-01

In Polish lignite surface mines, condition-based belt replacement strategies are applied in order to assure profitable refurbishment of worn out belts performed by external firms specializing in belt maintenance. In two of three lignite mines, staff asses belt condition subjectively during visual inspections. Only one mine applies specialized diagnostic device (HRDS) allowing objective magnetic evaluation of belt core condition in order to choose the most profitable moment for the dismantling of worn out belt segments from conveyors and sending them to the maintenance firm which provides their refurbishment. This article describes the advantages of a new diagnostic device called DiagBelt. It was developed at the Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology. Economic gains from its application are calculated for the lignite mine and for the belt maintenance firm, taking into account random life (durability) of new and reconditioned belts (after the 1st and the 2nd refurbishment). Recursive calculations for following years allow the estimation of the length and costs of replaced, reconditioned and purchased belts on an annual basis, while the use of the Monte Carlo method allows the estimation of their variability caused by random deterioration of belts. Savings are obtained due to better selection of moments (times) for the replacement of belt segments and die to the possibility to qualify worn out belts for refurbishment without the need to remove their covers. In effect, increased belt durability and lowered share of waste belts (which were not qualified for reconditioning) create savings which can quickly cover expenditures on new diagnostic tools and regular belt inspections in the mine.

AN Fitting Reconditioning Tool

NASA Technical Reports Server (NTRS)

Lopez, Jason

2011-01-01

A tool was developed to repair or replace AN fittings on the shuttle external tank (ET). (The AN thread is a type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a U.S. military-derived specification agreed upon by the Army and Navy, hence AN.) The tool is used on a drill and is guided by a pilot shaft that follows the inside bore. The cutting edge of the tool is a standard-size replaceable insert. In the typical Post Launch Maintenance/Repair process for the AN fittings, the six fittings are removed from the ET's GUCP (ground umbilical carrier plate) for reconditioning. The fittings are inspected for damage to the sealing surface per standard operations maintenance instructions. When damage is found on the sealing surface, the condition is documented. A new AN reconditioning tool is set up to cut and remove the surface damage. It is then inspected to verify the fitting still meets drawing requirements. The tool features a cone-shaped interior at 36.5 , and may be adjusted at a precise angle with go-no-go gauges to insure that the cutting edge could be adjusted as it wore down. One tool, one setting block, and one go-no-go gauge were fabricated. At the time of this reporting, the tool has reconditioned/returned to spec 36 AN fittings with 100-percent success of no leakage. This tool provides a quick solution to repair a leaky AN fitting. The tool could easily be modified with different-sized pilot shafts to different-sized fittings.

26 CFR 48.4061(b)-3 - Rebuilt, reconditioned, or repaired parts or accessories.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., reconditioned, or repaired parts or accessories. (a) Rebuilt parts or accessories. Rebuilding of automobile... for the person reassembling the generator, (6) reground or remetalized crankshafts, and (7) engines in... reassembling (with any necessary replacements of worn parts) of automobile parts or accessories, such as fuel...

26 CFR 48.4061(b)-3 - Rebuilt, reconditioned, or repaired parts or accessories.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., reconditioned, or repaired parts or accessories. (a) Rebuilt parts or accessories. Rebuilding of automobile... for the person reassembling the generator, (6) reground or remetalized crankshafts, and (7) engines in... reassembling (with any necessary replacements of worn parts) of automobile parts or accessories, such as fuel...

26 CFR 48.4061(b)-3 - Rebuilt, reconditioned, or repaired parts or accessories.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., reconditioned, or repaired parts or accessories. (a) Rebuilt parts or accessories. Rebuilding of automobile... for the person reassembling the generator, (6) reground or remetalized crankshafts, and (7) engines in... reassembling (with any necessary replacements of worn parts) of automobile parts or accessories, such as fuel...

GROWTH AND RECOVERY OF SELECTED GRAM NEGATIVE BACTERIA IN RECONDITIONED WASTEWATER

EPA Science Inventory

Previous reports indicated that Escherichia coli )157:H7, Salmonella spp., and Vibrio cholerae can grow in nutrient-limited, reconditioned wastewater over the temperature range of 4-46C, when the BOD of this water was <2 while its coliform growth response (CGR) was >2. In this cu...

49 CFR 171.1 - Applicability of Hazardous Materials Regulations (HMR) to persons and functions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... transportation of hazardous materials in commerce and to pre-transportation and transportation functions. (a..., reconditions, repairs, or tests a packaging or a component of a packaging that is represented, marked..., reconditions, repairs, or tests a packaging or a component of a packaging that is represented, marked...

46 CFR 160.062-4 - Inspections and tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... approved hydraulic releases are manufactured or reconditioned to observe production methods and to conduct... place of manufacture by the marine inspector. (b) Classification of tests. The sampling, inspections... shall be tested by applying buoyant loads of its designed capacity to its spring-tensioned gripe as...

Cue-Controlled Relaxation and Systematic Desensitization versus Nonspecific Factors in Treating Test Anxiety.

ERIC Educational Resources Information Center

Russell, Richard K.; Lent, Robert W.

1982-01-01

Compared the efficacy of two behavioral anxiety reduction techniques against "subconscious reconditioning," an empirically derived placebo method. Examination of within-group changes showed systematic desensitization produced significant reductions in test and trait anxiety, and remaining treatments and the placebo demonstrated…

Can 10% hydrofluoric acid be used for reconditioning of orthodontic brackets?

PubMed

Pompeo, Daniela D; Rosário, Henrique D; Lopes, Beatriz Mv; Cesar, Paulo F; Paranhos, Luiz Renato

2016-01-01

Bracket debonding is a common problem during orthodontic treatment. This type of failure is associated to masticatory forces, poor adhesion, and the need for repositioning the piece. The objective of this work was to compare the shear bond strength of debonded brackets that were reconditioned using different protocols (alumina blasting versus hydrofluoric etching). This was an in vitro experimental study with 45 stainless steel orthodontic brackets. They were randomly divided into three groups: (1) New brackets (n = 15), (2) brackets reconditioned using 10% hydrofluoric acid for 60 s (n = 15), and (3) brackets reconditioned by aluminum oxide blasting until complete removal of the remaining resin (n = 15). In Groups 2 and 3, the insertion of composite resin proceeded in two stages to simulate a type of bracket failure in which the bonding resin was left at the bracket base. For the shear test, the assembly composed by the metallic support, and specimen was taken to the Instron universal testing machine in which the specimens were loaded using a semicircle-shaped active tip in the region of the bonding interface parallel to the surface of the bracket at a speed of 0.5 mm/min. The data were subjected to D'Agostino's normality test to have their distribution checked. Analysis of variance and Tukey's test (P < 0.01) were used to compare the findings between groups. The results indicated that Group 1 (new brackets) showed higher bond strength than that obtained for the group treated with hydrofluoric acid (Group 2, P < 0.01). The bond strength value obtained for the group treated with alumina blasting (Group 3) was statistically similar to those obtained for Groups 1 and 2. The aluminum oxide blasting technique was effective for the reconditioning of orthodontic brackets. Nevertheless, the reconditioning technique using 10% fluoridric acid for 60 s was not efficient for clinical use.

An analysis of nickel cadmium batteries

NASA Technical Reports Server (NTRS)

Turner, J. B., Jr.

1982-01-01

Temperature effects, reconditioning, divergencies, capacity, charge rates, depth of discharge, and cell matching and their effects on battery life are discussed. The development of a practical strategy for predicting battery life by subjecting cells to simulated cyclic operation is also addressed.

The In-Orbit Battery Reconditioning Experience On Board the Orion 1 Spacecraft

NASA Technical Reports Server (NTRS)

Hoover, S. A.; Daughtridge, S.; Johnson, P. J.; King, S. T.

1997-01-01

The Orion 1 spacecraft is a three-axis stabilized geostationary earth orbiting commercial communications satellite which was launched on November 29, 1994 aboard an Atlas II launch vehicle. The power subsystem is a dual bus, dual battery semi-regulated system with one 78 Ampere-hour nickel-hydrogen battery per bus. The batteries were built and tested by Eagle Picher Industries, Inc., of Joplin, MO and were integrated into the spacecraft by its manufacturer, Matra Marconi Space UK Ltd. This paper presents the results obtained during the first four in-orbit reconditioning cycles and compares the battery performance to ground test data. In addition, the on-station battery management strategy and implementation constraints are described. Battery performance has been nominal throughout each reconditioning cycle and subsequent eclipse season.

Heat exchanger life extension via in-situ reconditioning

DOEpatents

Holcomb, David E.; Muralidharan, Govindarajan

2016-06-28

A method of in-situ reconditioning a heat exchanger includes the steps of: providing an in-service heat exchanger comprising a precipitate-strengthened alloy wherein at least one mechanical property of the heat exchanger is degraded by coarsening of the precipitate, the in-service heat exchanger containing a molten salt working heat exchange fluid; deactivating the heat exchanger from service in-situ; in a solution-annealing step, in-situ heating the heat exchanger and molten salt working heat exchange fluid contained therein to a temperature and for a time period sufficient to dissolve the coarsened precipitate; in a quenching step, flowing the molten salt working heat-exchange fluid through the heat exchanger in-situ to cool the alloy and retain a supersaturated solid solution while preventing formation of large precipitates; and in an aging step, further varying the temperature of the flowing molten salt working heat-exchange fluid to re-precipitate the dissolved precipitate.

Development of a reconditioning program for elderly abdominal surgery patients: the Elder-friendly Approaches to the Surgical Environment-BEdside reconditioning for Functional ImprovemenTs (EASE-BE FIT) pilot study.

PubMed

McComb, Alyssa; Warkentin, Lindsey M; McNeely, Margaret L; Khadaroo, Rachel G

2018-01-01

Elderly individuals who are hospitalized due to emergency abdominal surgery spend over 80% of their recovery time in bed, resulting in early and rapid muscle loss. As these elderly individuals have a lower physiological reserve, the impact of muscle wasting on function may be profound. The objectives of this study are to (1) create an independently led post-surgical reconditioning program and (2) pilot its implementation, while assessing the feasibility and safety of the program. The BE FIT program was generated with hospital rehabilitation staff to target lower limb strength, balance, and endurance. This pilot study was assessed using a sequential before and after trial, with a cohort of patients aged ≥ 65 years enrolled in the Elder-friendly Approaches to the Surgical Environment (EASE) study. Change in 30-s sit-to-stand performance between postoperative day 2 and discharge was compared between Usual Care pre- and post-BE FIT participants. A total of 66 patients participated in the sub-study, 33 Usual Care and 33 BE FIT. Mean (SD) age was 76.2 (8.78); 44 (67%) were female, with 11 (17%) reporting mild/moderate frailty on the CHSA Clinical Frailty Scale. BE FIT participants had a median of three rehab days and self-reported completing an average of 83% of the exercises. The adjusted between group difference showed that the BE FIT patients were able to complete more stands than the Usual Care (1.9 stands (0.94), p  = 0.05). There were no reported adverse events. The reconditioning program was shown to be safe and feasible within the hospital setting for the elderly emergency abdominal surgery patients. More rigorous assessment is needed to confirm this effectiveness and to better assess patient adherence to self-directed exercise. Registration #NCT02233153 through ClinicalTrials.gov. Registered September 8, 2014.

Use of Ultrasound in Reconditioning by Welding of Tools Used in the Process of Regenerating Rubber.

PubMed

Dobrotă, Dan; Petrescu, Valentin

2018-02-10

Addressing the problem of reconditioning large parts is of particular importance, due to their value and to the fact that the technologies for their reconditioning are very complex. The tools used to refine regenerated rubber which measure 660 mm in diameter and 2130 mm in length suffer from a rather fast dimensional wear. Within this research, the authors looked for a welding reconditioning procedure that would allow a very good adhesion between the deposited material layer and the base material. In this regard, the MAG (Metal Active Gas) welding process was used, but the ultrasonic activation of the welding process was also considered. Thus, the wire used for welding was activated considering a variation of the frequency of ultrasounds in the range f = 18-22 kHz respectively of the oscillation amplitude A = 30-60 μm. Under these conditions it was found that the presence of ultrasonic waves during the welding cladding process results in uniform deposition of hard carbons at the grain boundary and in the elimination of any existing oxides on the deposition surface, but at the same time increases the adhesion between the base material and the additional material, all of which positively influence the wear and corrosion resistance of the tools used to refine the regenerated rubber.

Gas chromatography of volatile organic compounds

NASA Technical Reports Server (NTRS)

Zlatkis, A.

1973-01-01

System has been used for problems such as analysis of volatile metabolities in human blood and urine, analysis of air pollutants, and in tobacco smoke chemistry. Since adsorbent is reusable after porper reconditioning, method is both convenient and economical. System could be used for large scale on-site sampling programs in which sample is shipped to central location for analysis.

Ni Based Powder Reconditioning and Reuse for LMD Process

NASA Astrophysics Data System (ADS)

Renderos, M.; Girot, F.; Lamikiz, A.; Torregaray, A.; Saintier, N.

LMD is an additive manufacturing process based on the injection of metallic powder into a melt-pool created by a heat laser source on a substrate. One of the benefits of this technology is the reduction of the wasted material since it is a near-shape process. Moreover one of the main drawbacks is the relatively low efficiency of the trapped powder, which can be loss than 5% in some cases. The non-trapped powder represents a significant cost in the LMD process, since powder metal material is very expensive and usually is not reused. This article proposes a methodology of the reconditioning and posterior reuse of a nickel base powder commonly used in the aerospace industry, with the main objectives of cost saving, higher environmental cleanup and increase of the overall efficiency in the LMD process. The results are checked by the development of a prototype part built up from reused powder.

Concussion Characteristics in High School Football by Helmet Age/Recondition Status, Manufacturer, and Model: 2008-2009 Through 2012-2013 Academic Years in the United States.

PubMed

Collins, Christy L; McKenzie, Lara B; Ferketich, Amy K; Andridge, Rebecca; Xiang, Huiyun; Comstock, R Dawn

2016-06-01

Football helmets used by high school athletes in the United States should meet the National Operating Committee on Standards for Athletic Equipment performance standards. Despite differences in interior padding and exterior shells, all football helmets should provide comparable protection against concussions. Yet, debate continues on whether differences in the rates or severity of concussions exist based on helmet age/recondition status, manufacturer, or model. To investigate whether high school football concussion characteristics varied by helmet age/recondition status, manufacturer, and model. Descriptive epidemiological study. High school football concussion and helmet data were collected from academic years 2008-2009 through 2012-2013 as part of the National High School Sports-Related Injury Surveillance Study. The certified athletic trainers of participating schools submitted athlete-exposure (AE) and injury information weekly. Participating schools reported 2900 football concussions during 3,528,790 AEs for an overall rate of 8.2 concussions per 10,000 AEs. Concussion rates significantly increased from 2008-2009 through 2012-2013 overall (P = .006) as well as in competition (P = .027) and practice (P = .023). Characteristics of concussed football players (ie, mean number of symptoms, specific concussion symptoms, symptom resolution time, and time until return to play) were similar among players wearing new helmets when compared with reconditioned helmets. Fewer players wearing an old/not reconditioned helmet had concussion symptoms resolve within 1 day compared with players wearing a new helmet. Despite differences in the manufacturers and models of helmets worn by all high school football players compared with players who sustained a concussion, the mean number of concussion symptoms, specific concussion symptoms, symptom resolution time, and time until return to play were similar for concussions sustained by football players wearing the most common helmet manufacturers and models. Overall, for new and reconditioned football helmets, the most common helmet manufacturers and models on the market today appear to provide high school football players with similar protection against concussions. Concussions can have serious acute and long-term effects. An understanding of concussion patterns in high school athletes can drive targeted preventive measures, including improvements to and/or better use of protective equipment, to reduce the incidence and/or severity of sports-related concussions. © 2016 The Author(s).

Use of Ultrasound in Reconditioning by Welding of Tools Used in the Process of Regenerating Rubber

PubMed Central

Dobrotă, Dan; Petrescu, Valentin

2018-01-01

Addressing the problem of reconditioning large parts is of particular importance, due to their value and to the fact that the technologies for their reconditioning are very complex. The tools used to refine regenerated rubber which measure 660 mm in diameter and 2130 mm in length suffer from a rather fast dimensional wear. Within this research, the authors looked for a welding reconditioning procedure that would allow a very good adhesion between the deposited material layer and the base material. In this regard, the MAG (Metal Active Gas) welding process was used, but the ultrasonic activation of the welding process was also considered. Thus, the wire used for welding was activated considering a variation of the frequency of ultrasounds in the range f = 18–22 kHz respectively of the oscillation amplitude A = 30–60 μm. Under these conditions it was found that the presence of ultrasonic waves during the welding cladding process results in uniform deposition of hard carbons at the grain boundary and in the elimination of any existing oxides on the deposition surface, but at the same time increases the adhesion between the base material and the additional material, all of which positively influence the wear and corrosion resistance of the tools used to refine the regenerated rubber. PMID:29439400

One or 4 h of "in-house" reconditioning by machine perfusion after cold storage improve reperfusion parameters in porcine kidneys.

PubMed

Gallinat, Anja; Efferz, Patrik; Paul, Andreas; Minor, Thomas

2014-11-01

In-house machine perfusion after cold storage (hypothermic reconditioning) has been proposed as convenient tool to improve kidney graft function. This study investigated the role of machine perfusion duration for early reperfusion parameters in porcine kidneys. Kidney function after cold preservation (4 °C, 18 h) and subsequent reconditioning by one or 4 h of pulsatile, nonoxygenated hypothermic machine perfusion (HMP) was studied in an isolated kidney perfusion model in pigs (n = 6, respectively) and compared with simply cold-stored grafts (CS). Compared with CS alone, one or 4 h of subsequent HMP similarly and significantly improved renal flow and kidney function (clearance and sodium reabsorption) upon warm reperfusion, along with reduced perfusate concentrations of endothelin-1 and increased vascular release of nitric oxide. Molecular effects of HMP comprised a significant (vs CS) mRNA increase in the endothelial transcription factor KLF2 and lower expression of endothelin that were observed already at the end of one-hour HMP after CS. Reconditioning of cold-stored kidneys is possible, even if clinical logistics only permit one hour of therapy, while limited extension of the overall storage time by in-house machine perfusion might also allow for postponing of transplantation from night to early day work. © 2014 Steunstichting ESOT.

Update: Viking Lander NiCd batteries. Year six

NASA Technical Reports Server (NTRS)

Britting, A. O., Jr.

1982-01-01

The performance of NiCd batteries on the Viking Mars landers is discussed. During evaluation, three of the four batteries were maintained in the discharged state. Battery charge regimes and close-together, deep-discharge, reconditioning cycles to retard degradation of batteries are discussed. The effect of elevated temperatures during Martian summer on battery performance were also considered. Tabulated data for average battery capacity as a function of time are given. A design uplink to allow more frequent, greater depth of discharge reconditioning cycles was proposed.

Cell short circuit, preshort signature

NASA Technical Reports Server (NTRS)

Lurie, C.

1980-01-01

Short-circuit events observed in ground test simulations of DSCS-3 battery in-orbit operations are analyzed. Voltage signatures appearing in the data preceding the short-circuit event are evaluated. The ground test simulation is briefly described along with performance during reconditioning discharges. Results suggest that a characteristic signature develops prior to a shorting event.

Training Needs for High Performance in the Automotive Industry.

ERIC Educational Resources Information Center

Clyne, Barry; And Others

A project was conducted in Australia to identify the training needs of the emerging industry required to support the development of the high performance areas of the automotive machining and reconditioning field especially as it pertained to auto racing. Data were gathered through a literature search, interviews with experts in the field, and…

Permeation of limonene through disposable nitrile gloves using a dextrous robot hand

PubMed Central

Banaee, Sean; S Que Hee, Shane

2017-01-01

Objectives: The purpose of this study was to investigate the permeation of the low-volatile solvent limonene through different disposable, unlined, unsupported, nitrile exam whole gloves (blue, purple, sterling, and lavender, from Kimberly-Clark). Methods: This study utilized a moving and static dextrous robot hand as part of a novel dynamic permeation system that allowed sampling at specific times. Quantitation of limonene in samples was based on capillary gas chromatography-mass spectrometry and the internal standard method (4-bromophenol). Results: The average post-permeation thicknesses (before reconditioning) for all gloves for both the moving and static hand were more than 10% of the pre-permeation ones (P≤0.05), although this was not so on reconditioning. The standardized breakthrough times and steady-state permeation periods were similar for the blue, purple, and sterling gloves. Both methods had similar sensitivity. The lavender glove showed a higher permeation rate (0.490±0.031 μg/cm2/min) for the moving robotic hand compared to the non-moving hand (P≤0.05), this being ascribed to a thickness threshold. Conclusions: Permeation parameters for the static and dynamic robot hand models indicate that both methods have similar sensitivity in detecting the analyte during permeation and the blue, purple, and sterling gloves behave similarly during the permeation process whether moving or non-moving. PMID:28111415

Cognitive Functioning in Long Duration Head-down Bed Rest

NASA Technical Reports Server (NTRS)

Seaton, Kimberly A.; Slack, Kelley J.; Sipes, Walter A.; Bowie, Kendra

2008-01-01

The Space Flight Cognitive Assessment Tool for Windows (WinSCAT) is a self-administered battery of tests used on the International Space Station for evaluating cognitive functioning. Here, WinSCAT was used to assess cognitive functioning during extended head-down bed rest. Thirteen subjects who participated in 60 or 90 days of 6 deg head-down bed rest took WinSCAT during the pre-bed rest phase, the in-bed rest phase, and the post-bed rest (reconditioning) phase of study participation. After adjusting for individual baseline performance, 12 off-nominal scores were observed out of 351 total observations during bed rest and 7 of 180 during reconditioning. No evidence was found for systematic changes in off-nominal incidence as time in bed rest progressed, or during the reconditioning period. Cognitive functioning does not appear to be adversely affected by long duration head-down bed rest. Individual differences in underlying cognitive ability and motivation level are likely explanations for the current findings.

How can the pressure in anti-embolism stockings be maintained during use? Laboratory evaluation of simulated 'wear' and different reconditioning protocols.

PubMed

Macintyre, Lisa; Stewart, Hazel; Rae, Michelle

2016-12-01

Deep vein thrombosis is a major global health issue, responsible for thousands of deaths each year. While thrombi can form under a variety of circumstances, lack of mobility significantly increases risk and therefore non-ambulant patients are frequently fitted with anti-embolism stockings on admission to hospital, to aid blood flow, prevent pooling and thus clotting. Anti-embolism stockings are the most widely used non-invasive medical device on the market and are believed to reduce the risk of deep vein thrombosis by 40%. Despite their widespread use in hospitals world-wide, there is remarkably little research addressing their use or reconditioning and a wide variety of different reconditioning protocols are used in hospitals. The objective of this study was to establish the impact of different wear and reconditioning protocols on the pressure delivering ability of anti-embolism stockings. A laboratory investigation was undertaken to evaluate the pressure delivering ability of 2 major global brands of anti-embolism stockings over 5-8days of simulated wear (extension on static cylinders) and 4 different reconditioning protocols. 1 set of samples was continuously 'worn' for 8days without reconditioning, 1 set of samples was 'worn' for 5days with a day of relaxation between each day of 'wear', 1 set was 'hand washed' and 1 set was machine washed and then allowed to relax between each day of 'wear'. The pressure was measured at the beginning and end of each period of 'wear'. This study was undertaken in a conditioned textile testing laboratory that complies with BS EN ISO 139:2005+A1:2011. The pressure exerted by anti-embolism stockings reduced by between 15 and 24% after 24h of wear, it reduced by between 21 and 32% when worn continuously for 8days. Allowing stockings to rest for a day between days of wear allowed them to recover slightly but this recovery was only temporary. Washing stockings regenerated their pressure delivering potential significantly and machine washing allowed some to recover to exert more pressure than they had when new. Different brands of anti-embolism stockings exert different pressures on the same size of leg, when correctly fitted. The pressure exerted by anti-embolism stockings decreases with use but the correct pressure gradient is maintained if correctly fitted. Washing stockings after 24h of wear is effective in restoring their pressure delivering abilities and in some cases can surpass their 'as new' pressure delivering ability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Experience in Reconstructing the PT-60-90 Turbine by Reconditioning Heat Treatment of the High-Pressure Cylinder Shell

NASA Astrophysics Data System (ADS)

Ermolaev, V. V.; Zhuchenko, L. A.; Lyubimov, A. A.; Gladshtein, V. I.; Kremer, V. L.

2018-06-01

Experience in reconstructing the PT-60-90 turbine at Salavatskaya CHPP upon the operation for more than 350000 h is described. In the course of reconstruction, the life of the turbine was restored, its economic efficiency was increased, process extraction of 1.27-1.57 MPa was changed to uncontrolled extraction, and additional extraction of 3.43 MPa was arranged. The high-pressure cylinder (HPC) shell was restored by reconditioning heat treatment (RHT), and the rotor was replaced by a new modernized one. To select the optimal conditions of the reconditioning heat treatment of the HPC shell (of the PT-60-90 turbine) manufactured from 20CrMoPL grade steel, the results of previously conducted tests of the shell metal of the same grade were integrated. The heat treatment was carried out on modernized furnace equipment using means of and methods for controlling the temperature and heating and cooling rates. Detailed nondestructive inspection of the upper and lower HPC halves was performed. The locations, distribution, sizes, and types of the defects were identified. The detected defects and austenitic build-ups were removed, welded with pearlite electrodes, examined, and subjected to heat treatment (tempering). The actual heat treatment conditions were analyzed and, based on the obtained data on the mechanical properties of the metal, the tempering temperature and time were specified. Complete investigation of the metal of both HPC halves was conducted prior to the reconditioning heat treatment. The reliability of the metal of the cylinder shell after RHT was evaluated by the mechanical properties, such as tensile strength, critical ductile-to-brittle transition temperature (crack resistance), and stress-rupture strength. It was established that, after RHT, the characteristics of the metal, such as yield strength, ultimate strength, elongation per unit length, contraction ratio, hardness, and impact toughness, significantly improved and, on the whole, the quality of the metal met the requirements of the normative documentation for newly manufactured castings. The heat resistance of the metal of the cylinder shell after RHT also increased, which can ensure the operation of the HPC shell for more than 200 000 h provided that the recommendations for regular inspections of its condition are followed.

Ex-vivo machine perfusion for kidney preservation.

PubMed

Hamar, Matyas; Selzner, Markus

2018-06-01

Machine perfusion is a novel strategy to decrease preservation injury, improve graft assessment, and increase organ acceptance for transplantation. This review summarizes the current advances in ex-vivo machine-based kidney preservation technologies over the last year. Ex-vivo perfusion technologies, such as hypothermic and normothermic machine perfusion and controlled oxygenated rewarming, have gained high interest in the field of organ preservation. Keeping kidney grafts functionally and metabolically active during the preservation period offers a unique chance for viability assessment, reconditioning, and organ repair. Normothermic ex-vivo kidney perfusion has been recently translated into clinical practice. Preclinical results suggest that prolonged warm perfusion appears superior than a brief end-ischemic reconditioning in terms of renal function and injury. An established standardized protocol for continuous warm perfusion is still not available for human grafts. Ex-vivo machine perfusion represents a superior organ preservation method over static cold storage. There is still an urgent need for the optimization of the perfusion fluid and machine technology and to identify the optimal indication in kidney transplantation. Recent research is focusing on graft assessment and therapeutic strategies.

Tribological characterization of the drill pipe tool joints reconditioned by using welding technologies

NASA Astrophysics Data System (ADS)

Caltaru, M.; Badicioiu, M.; Ripeanu, R. G.; Dinita, A.; Minescu, M.; Laudacescu, E.

2018-01-01

Drill pipe is a seamless steel pipe with upset ends fitted with special threaded ends that are known as tool joints. During drilling operations, the wall thickness of the drill pipe and the outside diameter of the tool joints will be gradually reduced due to wear. The present research work investigate the possibility of reconditioning the drill pipe tool joints by hardbanding with a new metal-cored coppered flux cored wire, Cr-Mo alloyed, using the gas metal active welding process, taking into considerations two different hardbanding technologies, consisting in: hardbanding drill pipe tool joints after removing the old hardbanding material and surface reconstruction with a compensation material (case A), and hardbanding tool joint drill pipe, without removing the old hardbanding material (case B). The present paper brings forward the experimental researches regarding the tribological characterization of the reconditioned drill pipe tool joint by performing macroscopic analyses, metallographic analyses, Vickers hardness measurement, chemical composition measurement and wear tests conducted on ball on disk friction couples, in order to certify the quality of the hardbanding obtained by different technological approaches, to validate the optimum technology.

WASTE MINIMIZATION AUDIT REPORT: CASE STUDIES OF MINIMIZATION OF SOLVENT WASTES AND ELECTROPLATING WASTES AT A DOD (DEPARTMENT OF DEFENSE) INSTALLATION

EPA Science Inventory

The report results of a waste minimization audit carried out in 1987 at a tank reconditioning facility operated by the DOD. The audit team developed recommendations for reducing the generation FOO6 wastewater treatment sludge, and FOO2, and FOO4 solvent wastes. In addition to det...

Graft reconditioning with nitric oxide gas in rat liver transplantation from cardiac death donors.

PubMed

Kageyama, Shoichi; Yagi, Shintaro; Tanaka, Hirokazu; Saito, Shunichi; Nagai, Kazuyuki; Hata, Koichiro; Fujimoto, Yasuhiro; Ogura, Yasuhiro; Tolba, Rene; Shinji, Uemoto

2014-03-27

Liver transplant outcomes using grafts donated after cardiac death (DCD) remain poor. We investigated the effects of ex vivo reconditioning of DCD grafts with venous systemic oxygen persufflation using nitric oxide gas (VSOP-NO) in rat liver transplants. Orthotopic liver transplants were performed in Lewis rats, using DCD grafts prepared using static cold storage alone (group-control) or reconditioning using VSOP-NO during cold storage (group-VSOP-NO). Experiment I: In a 30-min warm ischemia model, graft damage and hepatic expression of inflammatory cytokines, endothelial nitric oxide synthase (eNOS), inducible nitric oxide synthase (iNOS), and endothelin-1 (ET-1) were examined, and histologic analysis was performed 2, 6, 24, and 72 hr after transplantation. Experiment II: In a 60-min warm ischemia model, grafts were evaluated 2 hr after transplantation (6 rats/group), and survival was assessed (7 rats/group). Experiment I: Group-VSOP-NO had lower alanine aminotransferase (ALT) (P<0.001), hyaluronic acid (P<0.05), and malondialdehyde (MDA) (P<0.001), hepatic interleukin-6 expression (IL-6) (P<0.05), and hepatic tumor necrosis factor-alpha (TNF-α) expression (P<0.001). Hepatic eNOS expression (P<0.001) was upregulated, whereas hepatic iNOS (P<0.01) and ET-1 (P<0.001) expressions were downregulated. The damage of hepatocyte and sinusoidal endothelial cells (SECs) were lower in group-VSOP-NO.Experiment II: VSOP-NO decreased ET-1 and 8-hydroxy-2'deoxyguanosine (8-OHdG) expression and improved survival after transplantation by 71.4% (P<0.01). These results suggest that VSOP-NO effectively reconditions warm ischemia-damaged grafts, presumably by decreasing ET-1 upregulation and oxidative damage.

Alternative welding reconditioning solutions without post welding heat treatment of pressure vessel

NASA Astrophysics Data System (ADS)

Cicic, D. T.; Rontescu, C.; Bogatu, A. M.; Dijmărescu, M. C.

2017-08-01

In pressure vessels, working on high temperature and high pressure may appear some defects, cracks for example, which may lead to failure in operation. When these nonconformities are identified, after certain examination, testing and result interpretation, the decision taken is to repair or to replace the deteriorate component. In the current legislation it’s stipulated that any repair, alteration or modification to an item of pressurised equipment that was originally post-weld heat treated after welding (PWHT) should be post-weld heat treated again after repair, requirement that cannot always be respected. For that reason, worldwide, there were developed various welding repair techniques without PWHT, among we find the Half Bead Technique (HBT) and Controlled Deposition Technique (CDT). The paper presents the experimental results obtained by applying the welding reconditioning techniques HBT and CDT in order to restore as quickly as possible the pressure vessels made of 13CrMo4-5. The effects of these techniques upon the heat affected zone are analysed, the graphics of the hardness variation are drawn and the resulted structures are compared in the two cases.

Life test of a nickel cadmium battery with a protection/reconditioning circuit

NASA Technical Reports Server (NTRS)

Lanier, J. R., Jr.; Bush, J. R., Jr.

1981-01-01

Results are discussed for a Ni-Cd battery test over a period of 8 years, 2 months and 44,213 simulated low Earth orbits. The battery cells were protected against overdischarge and reversal at discharge rates up to 25 amperes (1.25C) by a battery protection and reconditioning circuit. The circuit performed flawlessly during the test, and proved its value, both as a battery reconditioner and a cell protection device. Battery cell failures are also discussed. The test demonstrated the viability of using Ni-Cd batteries at depth-of-discharge up to 25 percent for over 5 years in a low Earth orbit.

The Influence of Various Factors on High School Football Helmet Face Mask Removal: A Retrospective, Cross-Sectional Analysis

PubMed Central

Swartz, Erik E; Decoster, Laura C; Norkus, Susan A; Cappaert, Thomas A

2007-01-01

Context: Most research on face mask removal has been performed on unused equipment. Objective: To identify and compare factors that influence the condition of helmet components and their relationship to face mask removal. Design: A cross-sectional, retrospective study. Setting: Five athletic equipment reconditioning/recertification facilities. Participants: 2584 helmets from 46 high school football teams representing 5 geographic regions. Intervention(s): Helmet characteristics (brand, model, hardware components) were recorded. Helmets were mounted and face mask removal was attempted using a cordless screwdriver. The 2004 season profiles and weather histories were obtained for each high school. Main Outcome Measure(s): Success and failure (including reason) for removal of 4 screws from the face mask were noted. Failure rates among regions, teams, reconditioning year, and screw color (type) were compared. Weather histories were compared. We conducted a discriminant analysis to determine if weather variables, region, helmet brand and model, reconditioning year, and screw color could predict successful face mask removal. Metallurgic analysis of screw samples was performed. Results: All screws were successfully removed from 2165 (84%) helmets. At least 1 screw could not be removed from 419 (16%) helmets. Significant differences were found for mean screw failure per helmet among the 5 regions, with the Midwest having the lowest failure rate (0.08 ± 0.38) and the Southern (0.33 ± 0.72), the highest. Differences were found in screw failure rates among the 46 teams (F1,45 = 9.4, P < .01). Helmets with the longest interval since last reconditioning (3 years) had the highest failure rate, 0.47 ± 0.93. Differences in success rates were found among 4 screw types (χ21,4 = 647, P < .01), with silver screws having the lowest percentage of failures (3.4%). A discriminant analysis (Λ = .932, χ214,n=2584 = 175.34, P < .001) revealed screw type to be the strongest predictor of successful removal. Conclusions: Helmets with stainless steel or nickel-plated carbon steel screws reconditioned in the previous year had the most favorable combination of factors for successful screw removal. T-nut spinning at the side screw locations was the most common reason and location for failure. PMID:17597938

On the persistence of cocaine-induced place preferences and aversions in rats

PubMed Central

Su, Zu-In; Santoostaroam, Ashley; Wenzel, Jennifer; Ettenberg, Aaron

2013-01-01

Rationale Rats develop preferences for places associated with the immediate rewarding effects of cocaine and aversions for places paired with the drug’s delayed negative effects. The motivation to seek cocaine should therefore depend upon the relative magnitude of these two opposing effects of the drug. Objective The current study tested this notion by assessing the relative persistence of the positive and negative associations formed between environmental cues and the immediate or delayed effects of cocaine. Methods Rats were administered 1.0 mg/kg intravenous cocaine and placed into a distinctive environment either immediately or 15-min after injection, alternating daily with pairings of a second environment with saline. After 4 drug- and 4 saline-place pairings, rats were returned to their home cages for 1, 7 or 21 days after which a 15-min place preference test was conducted. In a second experiment, the effectiveness of a single reconditioning session (one drug-place and one saline-place pairing) to reactivate learned cocaine-place associations was assessed after 1- or 3-weeks of drug abstinence. Results Places associated with the immediate effects of cocaine were preferred (CPP), while places associated with the delayed effects of cocaine were avoided (CPA). The persistence of these effects differed with CPP remaining viable at 3-weeks of withdrawal while CPA was no longer present after 1-week. Reconditioning with an additional cocaine-place pairing failed to reinstate the CPA. Conclusions Cue-induced “relapse” of cocaine-seeking behavior may be fueled in part by an increased persistence of positive relative to negative associations with drug-paired stimuli. PMID:23568579

A high voltage electrical power system for low Earth orbit applications

NASA Technical Reports Server (NTRS)

Lanier, J. R., Jr.; Bush, J. R., Jr.

1984-01-01

The results of testing a high voltage electrical power system (EPS) breadboard using high voltage power processing equipment developed at Marshall Space Flight Center and Ni-Cd batteries are discussed. These test results are used to extrapolate to an efficient, reliable, high capacity EPS for near term low Earth orbit, high power applications. EPS efficiencies, figures of merit, and battery reliability with a battery protection and reconditioning circuit are presented.

Orbital management and design considerations for NiCd satellite power systems

NASA Technical Reports Server (NTRS)

Tausch, Benjamin J., II

1994-01-01

Several recently manufactured 50 and 60 ampere hour aerospace NiCd battery cell lots, produced by Gates Aerospace Batteries, are prone to premature on orbit performance degradation. The failure mechanism is cadmium migration, and the consequent development of soft shorts. A Martin Marietta Astronautics satellite program instituted an orbital management strategy for a set of these batteries that reduced the rate of degradation and brought the system to stable operation. This strategy involves: (1) minimizing the accumulated battery overcharge; (2) regular discharge exercises; and (3) periodic battery reconditioning. Because of changes in the NiCd cell manufacturing process, the actual performance of subsequent lots of NiCd cells is open to question. Future NiCd based power system designs should therefore allow for fine control of charge parameters, and an on orbit battery reconditioning capability. To minimize risk, it is much better to perform a full life test to qualify the cells before launch, rather than in parallel with orbital operations. If there are any changes in the manufacturing process of cells, it is extremely important to maintain very strong cognizance of secondary subcontractors, recognizing that the cell and battery manufacturing discipline is easily atrophied.

7 CFR 29.2544 - Resweated.

Code of Federal Regulations, 2014 CFR

2014-01-01

... which has passed through a second fermentation under abnormally high temperatures or refermented with a relatively high percentage of moisture. Resweated includes tobacco which has been dipped or reconditioned...

7 CFR 29.2544 - Resweated.

Code of Federal Regulations, 2011 CFR

2011-01-01

... which has passed through a second fermentation under abnormally high temperatures or refermented with a relatively high percentage of moisture. Resweated includes tobacco which has been dipped or reconditioned...

7 CFR 29.2544 - Resweated.

Code of Federal Regulations, 2012 CFR

2012-01-01

... which has passed through a second fermentation under abnormally high temperatures or refermented with a relatively high percentage of moisture. Resweated includes tobacco which has been dipped or reconditioned...

7 CFR 29.2544 - Resweated.

Code of Federal Regulations, 2013 CFR

2013-01-01

... which has passed through a second fermentation under abnormally high temperatures or refermented with a relatively high percentage of moisture. Resweated includes tobacco which has been dipped or reconditioned...

7 CFR 29.2292 - Resweated.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Resweated. The condition of tobacco which has passed through a second fermentation under abnormally high... been dipped or reconditioned after its first fermentation and put through a forced or artificial sweat. ...

7 CFR 29.3541 - Resweated.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Type 95) § 29.3541 Resweated. The condition of tobacco which has passed through a second fermentation.... Resweated includes tobacco which has been dipped or reconditioned after its first fermentation and put...

7 CFR 29.3541 - Resweated.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Type 95) § 29.3541 Resweated. The condition of tobacco which has passed through a second fermentation.... Resweated includes tobacco which has been dipped or reconditioned after its first fermentation and put...

7 CFR 29.3541 - Resweated.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Type 95) § 29.3541 Resweated. The condition of tobacco which has passed through a second fermentation.... Resweated includes tobacco which has been dipped or reconditioned after its first fermentation and put...

7 CFR 29.3541 - Resweated.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Type 95) § 29.3541 Resweated. The condition of tobacco which has passed through a second fermentation.... Resweated includes tobacco which has been dipped or reconditioned after its first fermentation and put...

7 CFR 29.3541 - Resweated.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Type 95) § 29.3541 Resweated. The condition of tobacco which has passed through a second fermentation.... Resweated includes tobacco which has been dipped or reconditioned after its first fermentation and put...

Measurement of drill grinding parameters using laser sensor

NASA Astrophysics Data System (ADS)

Yanping, Peng; Kumehara, Hiroyuki; Wei, Zhang; Nomura, Takashi

2005-12-01

To measure the grinding parameters and geometry parameters accurately for a drill point is essential to its design and reconditioning. In recent years, a number of non-contact coordinate measuring apparatuses, using CCD camera or laser sensors, are developed. But, a lot work is to be done for further improvement. This paper reports another kind of laser coordinate meter. As an example of its application, the method for geometry inspection of the drill flank surface is detailed. Measured data from laser scanning on the flank surface around some points with several 2-dimensional curves are analyzed with mathematical procedure. If one of these curves turns to be a straight line, it must be the generatrix of the grinding cone. Thus, the grinding parameters are determined by a set of three generatrices. Then, the measurement method and data processing procedure are proposed. Its validity is assessed by measuring a sample with given parameters. The point geometry measured agrees well with the known values. In comparison with other methods in the published literature, it is simpler in computation and more accurate in results.

Autonomous Scanning Probe Microscopy in Situ Tip Conditioning through Machine Learning.

PubMed

Rashidi, Mohammad; Wolkow, Robert A

2018-05-23

Atomic-scale characterization and manipulation with scanning probe microscopy rely upon the use of an atomically sharp probe. Here we present automated methods based on machine learning to automatically detect and recondition the quality of the probe of a scanning tunneling microscope. As a model system, we employ these techniques on the technologically relevant hydrogen-terminated silicon surface, training the network to recognize abnormalities in the appearance of surface dangling bonds. Of the machine learning methods tested, a convolutional neural network yielded the greatest accuracy, achieving a positive identification of degraded tips in 97% of the test cases. By using multiple points of comparison and majority voting, the accuracy of the method is improved beyond 99%.

26 CFR 2.1-1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... note). (4) Citizen means a person who, if an individual, was born or naturalized as a citizen of the... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

26 CFR 2.1-1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... note). (4) Citizen means a person who, if an individual, was born or naturalized as a citizen of the... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

26 CFR 2.1-1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... note). (4) Citizen means a person who, if an individual, was born or naturalized as a citizen of the... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

26 CFR 2.1-1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... note). (4) Citizen means a person who, if an individual, was born or naturalized as a citizen of the... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

26 CFR 2.1-1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... note). (4) Citizen means a person who, if an individual, was born or naturalized as a citizen of the... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

16 CFR 20.0 - Scope and purpose of the guides.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.0 Scope and purpose of the guides... used parts designed for use in automobiles, trucks, motorcycles, tractors, or similar self-propelled...

16 CFR 20.0 - Scope and purpose of the guides.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.0 Scope and purpose of the guides... used parts designed for use in automobiles, trucks, motorcycles, tractors, or similar self-propelled...

16 CFR 20.0 - Scope and purpose of the guides.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.0 Scope and purpose of the guides... used parts designed for use in automobiles, trucks, motorcycles, tractors, or similar self-propelled...

16 CFR 20.0 - Scope and purpose of the guides.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.0 Scope and purpose of the guides... used parts designed for use in automobiles, trucks, motorcycles, tractors, or similar self-propelled...

16 CFR 20.0 - Scope and purpose of the guides.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.0 Scope and purpose of the guides... used parts designed for use in automobiles, trucks, motorcycles, tractors, or similar self-propelled...

Mojave Base Station Implementation

NASA Technical Reports Server (NTRS)

Koscielski, C. G.

1984-01-01

A 12.2 meter diameter X-Y mount antenna was reconditioned for use by the crustal dynamic project as a fixed base station. System capabilities and characteristics and key performance parameters for subsystems are presented. The implementation is completed.

View of hydrodynamic support cylinders, removed from structure and relocated ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of hydrodynamic support cylinders, removed from structure and relocated for reconditioning to return them to service. - Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

Qualitative and quantitative comparisons on reconditioning by welding of crankshafts from auto industry

NASA Astrophysics Data System (ADS)

Chivu (Vîrlan, O. R.; Rontescu, C.; Cicic, D. T.; Vasile, I. M.; Petriceanu, C.

2015-11-01

One of the goals of modern society is represented by reducing the cost for the maintenance of cars. One of the pieces that break down most often on the engine block is the crankshaft, in various areas of it. Due to the fact that the price of a crankshaft is very high, specialists seek solutions for repairing and not replacing them. In this study, it is presented a comparison in terms of hardness obtained at recovering the counterweight by welding by using two methods of welding, WIG and SMAW through various techniques: normal, WTO, lateral depositing.

Is it possible to further improve the function of pulmonary grafts by extending the duration of lung reconditioning using ex vivo lung perfusion?

PubMed

Pierre, L; Lindstedt, S; Hlebowicz, J; Ingemansson, R

2013-07-01

The method of ex vivo lung perfusion (EVLP) has been suggested as a reliable means of differentiating between "good" and "poor" pulmonary grafts in marginal donors as, when grafts identified as good by this method are transplanted, the results do not differ from those using lungs fulfilling standard criteria. The EVLP method is also thought to improve pulmonary grafts by reducing lung edema and eliminating lung atelectasis. In the present study, we investigated whether the pulmonary graft could be further improved by extending the duration of EVLP. Six Landrace pigs were used. The lungs were reconditioned and evaluated, using the EVLP method, as double lungs. After the initial evaluation, EVLP was continued for a further 90 minutes. The arterial oxygen level (pO2) was 60.8 ± 4.8 kPa after the standard 60 minutes of EVLP and 67.1 ± 2.2 kPa after 150 minutes (p = 0.48). The pulmonary vascular resistance was 453 ± 78 dyne*s/cm(5) after 60, 90, 120 and 150 minutes of EVLP (p = 1.0). The pulmonary artery pressure was 17.8 ± 1.0 mmHg after 60, 90, 120, and 150 minutes of EVLP (p = 1.0) and the pulmonary artery flow was 3.5 ± 0.4 l/min after 60, 90, 120, and 150 minutes of EVLP (p = 1.0). The mean weight of the pulmonary grafts after harvesting was 574 ± 20 g at the beginning of EVLP 541 ± 24 g and, after 150 min of EVLP, 668 ± 33 (p = 0.011). The blood gases and hemodynamic parameters in the pulmonary grafts did not improve as a result of the extra 90 minutes of EVLP. However, the weight of the pulmonary graft increased significantly with increasing duration of EVLP, indicating lung perfusion injury.

Design of a fast Mars space transfer system

NASA Astrophysics Data System (ADS)

Woo, Henry H.; Glass, James F.; Roy, Claude

1992-02-01

Architecture strategies and concepts for manned missions to Mars are being developed by NASA and industry. This paper addresses the key Mars transfer vehicle (MTV) design requirements which include surface payload mass, MTV mass, propulsion system characteristics, launch vehicle capability, in-space operations, abort considerations, crew exposure to interplanetary environments, and crew reconditioning for planetary entry. Different mission strategies are presented along with their implications. A representative artificial-g MTV using nuclear thermal propulsion is defined to show concepts which minimize extravehicular activity operations for in-space assembly, inspection, and maintenance.

Reconditioning of Cassini Narrow-Angle Camera

NASA Image and Video Library

2002-07-23

These five images of single stars, taken at different times with the narrow-angle camera on NASA Cassini spacecraft, show the effects of haze collecting on the camera optics, then successful removal of the haze by warming treatments.

UP2 400 High Activity Oxide Legacy Waste Retrieval Project Scope and Progress-13048

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chabeuf, Jean-Michel; Varet, Thierry

The High Activity Oxide facility (HAO) reprocessed sheared and dissolved 4500 metric tons of light water reactor fuel the fuel of the emerging light water reactor spent fuel between 1976 and 1998. Over the period, approximately 2200 tons of process waste, composed primarily of sheared hulls, was produced and stored in a vast silo in the first place, and in canisters stored in pools in subsequent years. Upon shutdown of the facility, AREVA D and D Division in La Hague launched a thorough investigation and characterization of the silos and pools content, which then served as input data for themore » definition of a legacy waste retrieval and reconditioning program. Basic design was conducted between 2005 and 2007, and was followed by an optimization phase which lead to the definition of a final scenario and budget, 12% under the initial estimates. The scenario planned for the construction of a retrieval and reconditioning cell to be built on top of the storage silo. The retrieved waste would then be rinsed and sorted, so that hulls could subsequently be sent to La Hague high activity compacting facility, while resins and sludge would be cemented within the retrieval cell. Detailed design was conducted successfully from 2008 until 2011, while a thorough research and development program was conducted in order to qualify each stage of the retrieval and reconditioning process, and assist in the elaboration of the final waste package specification. This R and D program was defined and conducted as a response and mitigation of the major project risks identified during the basic design process. Procurement and site preparatory works were then launched in 2011. By the end of 2012, R and D is nearly completed, the retrieval and reconditioning process have been secured, the final waste package specification is being completed, the first equipment for the retrieval cell is being delivered on site, while preparation works are allowing to free up space above and around the silo, to allow for construction which is scheduled to being during the first semester of 2013. The elaboration of the final waste package is still undergoing and expected to be completed by then end of 2013, following some final elements of R and D required to demonstrate the full compatibility of the package with deep geological repository. The HAO legacy waste retrieval project is so far the largest such project entering operational phase on the site of La Hague. It is on schedule, under budget, and in conformity with the delivery requirements set by the French Safety Authority, as well as other stakeholders. This project paves the way for the successful completion of AREVA La Hague other legacy waste retrieval projects, which are currently being drafted or already in active R and D phase. (authors)« less

Evaluation of Post Flooding Shoulder Reconditioning : final report.

DOT National Transportation Integrated Search

2017-02-01

The Ohio Department of Transportation (ODOT) Holmes County Garage has to frequently maintain the shoulders of the hilly and curvy highways, which are prone to shoulder erosion and material loss due to floods or heavy rain. Currently, the problematic ...

27 CFR 19.452 - Return of taxpaid spirits to bonded premises for destruction, denaturation, redistillation...

Code of Federal Regulations, 2011 CFR

2011-04-01

... accordance with subpart L of this part; (4) Reconditioning; or (5) Rebottling. (b) Dump and gauge of returned spirits. The proprietor must immediately dump spirits returned to bonded premises under this section...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

7 CFR 361.10 - Costs and charges.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.10 Costs and..., labeling, other reconditioning, or destruction of seed, screenings, or refuse under this part shall be reimbursed by the owner or consignee of the seed or screenings. ...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

Hemofiltration in ex vivo lung perfusion-a study in experimentally induced pulmonary edema.

PubMed

Nilsson, Tobias; Hansson, Christoffer; Wallinder, Andreas; Malm, Carl-Johan; Silverborn, Martin; Ricksten, Sven-Erik; Dellgren, Göran

2016-02-01

Ex vivo lung perfusion (EVLP) can potentially reduce pulmonary edema. In a pig model with induced pulmonary edema, we evaluated the effect of hemofiltration (HF) during EVLP on lung function, perfusate oncotic pressure, and lung weight. In anesthetized pigs (n = 14), pulmonary edema was induced by a balloon in the left atrium, combined with crystalloid infusion (20 mL/kg), for 2 hours. The lungs were harvested, stored cold for 2 hours, and randomized to EVLP, with or without a hemofilter (HF and noHF groups, respectively, n = 7 for each). EVLP was performed with cellular perfusate at a hematocrit of 10% to 15%. Oncotic pressure, lung performance, and weight were measured before and after 180 minutes of EVLP reconditioning with or without HF. After in vivo induction of edema, arterial oxygen tension (Pao2)/inspired oxygen fraction (Fio2), and compliance decreased by 63% and 16%, respectively. Pao2/Fio2 was considerably improved at first evaluation ex vivo in both groups. HF increased oncotic pressure by 43% and decreased lung weight by 15%. The effects were negligible in the noHF group. Compliance decreased in both groups during reconditioning, although less so in the HF group (P < .05). Pao2/Fio2, shunt fraction, and oxygen saturation remained unchanged in both groups. Pulmonary flow index decreased in both groups, and was partially reversed by nitroglycerin. Dorsal atelectatic consolidations were seen in both groups. In this lung-edema model, EVLP reconditioning with hyperoncotic solution did not affect the degree of lung edema. HF during EVLP increased perfusate oncotic pressure, decreased lung weight with beneficial effects on compliance, but did not improve lung oxygenation capacity. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

19 CFR 12.50 - Consumer products and industrial equipment subject to energy conservation or labeling standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Policy and Conservation Act of 1975, as amended (42 U.S.C. 6291-6317), and for which an entry for... reconditioning, re-labeling, or other modification. The release from CBP custody of any such covered import will...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

49 CFR 215.15 - Periodic inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.15 Periodic inspection. (a) After June 30, 1980, a railroad may not place or continue in service a freight car that has not received... FR 44044), unless— (1) The car is a high utilization car built or reconditioned after December 31...

49 CFR 215.15 - Periodic inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.15 Periodic inspection. (a) After June 30, 1980, a railroad may not place or continue in service a freight car that has not received... FR 44044), unless— (1) The car is a high utilization car built or reconditioned after December 31...

49 CFR 215.15 - Periodic inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.15 Periodic inspection. (a) After June 30, 1980, a railroad may not place or continue in service a freight car that has not received... FR 44044), unless— (1) The car is a high utilization car built or reconditioned after December 31...

49 CFR 215.15 - Periodic inspection.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.15 Periodic inspection. (a) After June 30, 1980, a railroad may not place or continue in service a freight car that has not received... FR 44044), unless— (1) The car is a high utilization car built or reconditioned after December 31...

49 CFR 215.15 - Periodic inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.15 Periodic inspection. (a) After June 30, 1980, a railroad may not place or continue in service a freight car that has not received... FR 44044), unless— (1) The car is a high utilization car built or reconditioned after December 31...

16 CFR 20.1 - Deception generally.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Deception generally. 20.1 Section 20.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.1 Deception generally. (a) It is unfair or deceptive...

16 CFR 20.1 - Deception generally.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Deception generally. 20.1 Section 20.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.1 Deception generally. (a) It is unfair or deceptive...

16 CFR 20.1 - Deception generally.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Deception generally. 20.1 Section 20.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.1 Deception generally. (a) It is unfair or deceptive...

16 CFR 20.1 - Deception generally.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception generally. 20.1 Section 20.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.1 Deception generally. (a) It is unfair or deceptive...

16 CFR 20.1 - Deception generally.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Deception generally. 20.1 Section 20.1 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS INDUSTRY § 20.1 Deception generally. (a) It is unfair or deceptive...

Fluid Power Systems Maintenance and Operation. Instructor's Guide.

ERIC Educational Resources Information Center

Paule, Bob A.

Written to complement the Fluid Power/Basic Hydraulic and Basic Pneumatics guides, this curriculum guide contains materials for a seven-unit course in fluid power systems maintenance and operation. Units, which consist of one to eight lessons, cover these topics: preventive maintenance, repair machine malfunctions, overhaul/recondition hydraulic…

7 CFR 361.10 - Costs and charges.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.10 Costs and..., and salaries of officers or employees of the Department) in connection with the monitoring of cleaning, labeling, other reconditioning, or destruction of seed, screenings, or refuse under this part shall be...

26 CFR 48.4061(b)-3 - Rebuilt, reconditioned, or repaired parts or accessories.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., Tires, Tubes, Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(b)-3 Rebuilt... batteries, (2) rebabbited or machined connecting rods, (3) reassembled clutches after operations such as the... reassembling (with any necessary replacements of worn parts) of automobile parts or accessories, such as fuel...

When wastewater has worth: Water reconditioning opportunities in the food industry to achieve sustainable food manufacturing (abstract)

USDA-ARS?s Scientific Manuscript database

A major sustainability goal of food processing wastewater (FPWW) management is to not only decrease environmental pollution but also utilize valuable co-products present in the FPWW. Many processed food products, especially those from fruits and vegetables, result in FPWW streams that contain compou...

20 CFR 10.518 - Does OWCP provide services to help employees return to work?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Does OWCP provide services to help employees... provide services to help employees return to work? (a) OWCP may, in its discretion, provide vocational... help to tailor individual rehabilitation programs to employees' physical reconditioning and behavioral...

77 FR 29922 - Guides for the Rebuilt, Reconditioned and Other Used Automobile Parts Industry, Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... rules and guides, the Commission requests public comment on the costs, benefits, necessity for, and... its rules and guides periodically. These reviews seek information about the costs, benefits, and... addressing whether the Used Auto Parts Guides are still needed, their costs and benefits to consumers and...

77 FR 39567 - Common Law Tort Claims Concerning Design and Marking of DOT Specification 39 Compressed Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... pressure and flattening testing. 49 CFR 178.65. Subsection 178.65(i) provides that the cylinder must be... acts as a consultant), and the Gases and Welding Distributors Association, Inc. (GAWDA).\\4\\ \\4\\ GAWDA..., inspecting, marking, maintaining, reconditioning, repairing, or testing a package, container, or packaging...

RCA Satcom: In-orbit experience

NASA Technical Reports Server (NTRS)

Debaylo, P. W.; Gaston, S. J.

1980-01-01

The system characteristics of the Satcom batteries and Satcom power system are briefly discussed. Performance of the nickel cadmium 22 cell batteries onboard in parallel with independent redundant charges providing the charge rates is reported. Performance onboard reconditioning with individual cell bypasses with 1 ohm resistors is discussed for the F-1 and F-2 spacecraft.

Is Recurrent Perseveration a Product of Deafferented Functional Systems with Otherwise Normal Post-Activation Decay Rates?

ERIC Educational Resources Information Center

Buckingham, Hugh W.; Buckingham, Sarah S.

2011-01-01

Recent work in neuropsychology, clinical aphasiology and neuropharmacology have presented evidence that the causative substrates of recurrent perseveration in adults with aphasia are more recondite and subject to distinct interpretations than originally thought. This article will discuss and evaluate how various proposals from theory, from the…

27 CFR 25.295 - Record of unsalable beer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Record of unsalable beer..., DEPARTMENT OF THE TREASURY LIQUORS BEER Records and Reports § 25.295 Record of unsalable beer. A brewer having unsalable beer in packages or tanks in the brewery may destroy, recondition, or use the beer as...

27 CFR 25.295 - Record of unsalable beer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Record of unsalable beer..., DEPARTMENT OF THE TREASURY ALCOHOL BEER Records and Reports § 25.295 Record of unsalable beer. A brewer having unsalable beer in packages or tanks in the brewery may destroy, recondition, or use the beer as...

27 CFR 25.295 - Record of unsalable beer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Record of unsalable beer..., DEPARTMENT OF THE TREASURY LIQUORS BEER Records and Reports § 25.295 Record of unsalable beer. A brewer having unsalable beer in packages or tanks in the brewery may destroy, recondition, or use the beer as...

27 CFR 25.295 - Record of unsalable beer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Record of unsalable beer..., DEPARTMENT OF THE TREASURY ALCOHOL BEER Records and Reports § 25.295 Record of unsalable beer. A brewer having unsalable beer in packages or tanks in the brewery may destroy, recondition, or use the beer as...

16 CFR 20.2 - Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner. 20.2 Section 20.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.2 - Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner. 20.2 Section 20.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.2 - Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner. 20.2 Section 20.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.2 - Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner. 20.2 Section 20.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.2 - Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Deception as to identity of rebuilder, remanufacturer, reconditioner or reliner. 20.2 Section 20.2 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

40 CFR 156.140 - Identification of container types.

Code of Federal Regulations, 2012 CFR

2012-07-01

... statement such as “See container for recycling [or other descriptive word] information.” must be placed on... directions for use allow a different (concentrated) product to be diluted in the container.” (3) Recycling or reconditioning statement. One of the following statements is required: (i) “Offer for recycling if available...

40 CFR 156.140 - Identification of container types.

Code of Federal Regulations, 2010 CFR

2010-07-01

... statement such as “See container for recycling [or other descriptive word] information.” must be placed on... directions for use allow a different (concentrated) product to be diluted in the container.” (3) Recycling or reconditioning statement. One of the following statements is required: (i) “Offer for recycling if available...

40 CFR 156.140 - Identification of container types.

Code of Federal Regulations, 2011 CFR

2011-07-01

... statement such as “See container for recycling [or other descriptive word] information.” must be placed on... directions for use allow a different (concentrated) product to be diluted in the container.” (3) Recycling or reconditioning statement. One of the following statements is required: (i) “Offer for recycling if available...

40 CFR 156.140 - Identification of container types.

Code of Federal Regulations, 2013 CFR

2013-07-01

... statement such as “See container for recycling [or other descriptive word] information.” must be placed on... directions for use allow a different (concentrated) product to be diluted in the container.” (3) Recycling or reconditioning statement. One of the following statements is required: (i) “Offer for recycling if available...

40 CFR 156.140 - Identification of container types.

Code of Federal Regulations, 2014 CFR

2014-07-01

... statement such as “See container for recycling [or other descriptive word] information.” must be placed on... directions for use allow a different (concentrated) product to be diluted in the container.” (3) Recycling or reconditioning statement. One of the following statements is required: (i) “Offer for recycling if available...

27 CFR 25.295 - Record of unsalable beer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Record of unsalable beer..., DEPARTMENT OF THE TREASURY LIQUORS BEER Records and Reports § 25.295 Record of unsalable beer. A brewer having unsalable beer in packages or tanks in the brewery may destroy, recondition, or use the beer as...

Methodology for astronaut reconditioning research.

PubMed

Beard, David J; Cook, Jonathan A

2017-01-01

Space medicine offers some unique challenges, especially in terms of research methodology. A specific challenge for astronaut reconditioning involves identification of what aspects of terrestrial research methodology hold and which require modification. This paper reviews this area and presents appropriate solutions where possible. It is concluded that spaceflight rehabilitation research should remain question/problem driven and is broadly similar to the terrestrial equivalent on small populations, such as rare diseases and various sports. Astronauts and Medical Operations personnel should be involved at all levels to ensure feasibility of research protocols. There is room for creative and hybrid methodology but careful systematic observation is likely to be more achievable and fruitful than complex trial based comparisons. Multi-space agency collaboration will be critical to pool data from small groups of astronauts with the accepted use of standardised outcome measures across all agencies. Systematic reviews will be an essential component. Most limitations relate to the inherent small sample size available for human spaceflight research. Early adoption of a co-operative model for spaceflight rehabilitation research is therefore advised. Copyright © 2016 Elsevier Ltd. All rights reserved.

Material testing of reconditioned orthodontic brackets.

PubMed

Reimann, S; Rewari, A; Keilig, L; Widu, F; Jäger, A; Bourauel, C

2012-12-01

While all manufacturers of orthodontic brackets label these products for single use, there are commercial providers offering bracket reconditioning (or "recycling"). We conducted this study to investigate the effects of different recycling techniques on material-related parameters in orthodontic brackets, aiming to derive indications for clinical use and conclusions about the biocompatibility, longevity, and application of recycled brackets. New metal brackets (equilibrium(®); Dentaurum, Ispringen, Germany) were compared to brackets recycled by different techniques, including direct flaming with a Bunsen burner, chemical reconditioning in an acid bath, a commercial unit (Big Jane; Esmadent, IL, USA), and outsourcing to a company (Ortho Clean, Dellstedt, Germany). Material-related examinations included the following: (1) corrosion behavior by static immersion testing and use of a mass spectrometer to determine nickel-ion concentrations in the corrosive medium, (2) surface features in scanning electron micrographs before and after corrosion testing, (3) Vickers hardness using a hardness testing machine, (4) shear bond strength as defined in DIN 13990-1, (5) dimensional stability of the bracket slots by light microscopy, and (6) frictional loss as assessed by an orthodontic measurement and simulation system (OMSS). Each examination was performed on ten brackets. Student's t-test was used for statistical analysis. Compared to the new brackets, those recycled in an acid bath or by a commercial provider revealed significant dimensional changes (p<0.05). Corrosion on the recycled brackets varied according to the recycling techniques employed. The group of brackets recycled by one company revealed hardness values that differed from those of all the other groups. No significant differences were observed in nickel-ion release, frictional loss, and shear bond strength. Recycling was found to significantly reduce the corrosion resistance and dimensional stability of orthodontic brackets. As the savings generated by recycling do not justify the risks involved, the practice of labeling orthodontic brackets for single use remains a responsible precaution that safeguards patients and orthodontists against definite risks.

PRECONDITIONED CONJUGATE-GRADIENT 2 (PCG2), a computer program for solving ground-water flow equations

USGS Publications Warehouse

Hill, Mary C.

1990-01-01

This report documents PCG2 : a numerical code to be used with the U.S. Geological Survey modular three-dimensional, finite-difference, ground-water flow model . PCG2 uses the preconditioned conjugate-gradient method to solve the equations produced by the model for hydraulic head. Linear or nonlinear flow conditions may be simulated. PCG2 includes two reconditioning options : modified incomplete Cholesky preconditioning, which is efficient on scalar computers; and polynomial preconditioning, which requires less computer storage and, with modifications that depend on the computer used, is most efficient on vector computers . Convergence of the solver is determined using both head-change and residual criteria. Nonlinear problems are solved using Picard iterations. This documentation provides a description of the preconditioned conjugate gradient method and the two preconditioners, detailed instructions for linking PCG2 to the modular model, sample data inputs, a brief description of PCG2, and a FORTRAN listing.

Reconditioning perovskite films in vapor environments through repeated cation doping

NASA Astrophysics Data System (ADS)

Boonthum, Chirapa; Pinsuwan, Kusuma; Ponchai, Jitprabhat; Srikhirin, Toemsak; Kanjanaboos, Pongsakorn

2018-06-01

Perovskites have attracted considerable attention for application as high-efficiency photovoltaic devices owing to their low-cost and low-temperature fabrication. A good surface and high crystallinity are necessary for high-performance devices. We examine the negative effects of chemical ambiences on the perovskite crystal formation and morphology. The repeated cation doping (RCD) technique was developed to remedy these issues by gradually dropping methylammonium ions on top of about-to-form perovskite surfaces to cause recrystallization. RCD promotes pinhole-free, compact, and polygonal-like surfaces under various vapor conditions. Furthermore, it enhances the electronic properties and crystallization. The benefits of RCD extend beyond perovskites under vapor ambiences, as it can improve regular and wasted perovskites.

7 CFR 989.24 - Standard raisins, off-grade raisins, other failing raisins, and raisin residual material.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Standard raisins, off-grade raisins, other failing... Handling Definitions § 989.24 Standard raisins, off-grade raisins, other failing raisins, and raisin... reconditioned or become “other failing raisins.” (c) Other failing raisins means any raisins received or...

7 CFR 989.24 - Standard raisins, off-grade raisins, other failing raisins, and raisin residual material.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Standard raisins, off-grade raisins, other failing... Handling Definitions § 989.24 Standard raisins, off-grade raisins, other failing raisins, and raisin... reconditioned or become “other failing raisins.” (c) Other failing raisins means any raisins received or...

7 CFR 989.24 - Standard raisins, off-grade raisins, other failing raisins, and raisin residual material.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Standard raisins, off-grade raisins, other failing... Handling Definitions § 989.24 Standard raisins, off-grade raisins, other failing raisins, and raisin... reconditioned or become “other failing raisins.” (c) Other failing raisins means any raisins received or...

7 CFR 989.24 - Standard raisins, off-grade raisins, other failing raisins, and raisin residual material.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Standard raisins, off-grade raisins, other failing... Handling Definitions § 989.24 Standard raisins, off-grade raisins, other failing raisins, and raisin... reconditioned or become “other failing raisins.” (c) Other failing raisins means any raisins received or...

Microprocessor controlled advanced battery management systems

NASA Technical Reports Server (NTRS)

Payne, W. T.

1978-01-01

The advanced battery management system described uses the capabilities of an on-board microprocessor to: (1) monitor the state of the battery on a cell by cell basis; (2) compute the state of charge of each cell; (3) protect each cell from reversal; (4) prevent overcharge on each individual cell; and (5) control dual rate reconditioning to zero volts per cell.

Effects of Swim Stress on Neophobia and Reconditioning Using a Conditioned Taste Aversion Procedure

ERIC Educational Resources Information Center

Walker, Jennifer M.; Ramsey, Ashley K.; Fowler, Stephanie W.; Schachtman, Todd R.

2012-01-01

Previous research has found that swim stress during a classical conditioning trial attenuates conditioned taste aversion (CTA). In the current study, rats were used to examine the effects of inescapable swim stress on the habituation of neophobia to a flavored solution and reacquisition of an extinguished conditioned taste aversion. In Experiment…

Small Engine Repair Modules (Workbook) = Reparacion de Motores Pequenos (Guia de Trabajo)

ERIC Educational Resources Information Center

New York State Dept. of Correctional Services, Albany.

This package contains an English-Language set of task procedure sheets dealing with small-engine repair and a Spanish translation of the same material. Addressed in the individual sections of the manual are the following aspects of engine tune-up, reconditioning, and troubleshooting: servicing air cleaners; cleaning gas tanks, fuel lines, and fuel…

46 CFR 298.20 - Term, redemptions, and interest rate.

Code of Federal Regulations, 2011 CFR

2011-10-01

... later of twenty-five years from the date of original delivery of a reconstructed, or reconditioned Vessel which is to be security for the Guarantees, or at the expiration of the remaining useful life of... economic life of the Vessel or Vessels or Shipyard Project, and may be less than but no more than: (1...

49 CFR 173.28 - Reuse, reconditioning and remanufacture of packagings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... non-bulk packaging. A non-bulk packaging used more than once must conform to the following provisions and limitations: (1) A non-bulk packaging which, upon inspection, shows evidence of a reduction in... thickness of 1.0 mm (0.039 inch). (6) A previously used non-bulk packaging may be reused for the shipment of...

49 CFR 173.28 - Reuse, reconditioning and remanufacture of packagings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... non-bulk packaging. A non-bulk packaging used more than once must conform to the following provisions and limitations: (1) A non-bulk packaging which, upon inspection, shows evidence of a reduction in... thickness of 1.0 mm (0.039 inch). (6) A previously used non-bulk packaging may be reused for the shipment of...

49 CFR 173.28 - Reuse, reconditioning and remanufacture of packagings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... non-bulk packaging. A non-bulk packaging used more than once must conform to the following provisions and limitations: (1) A non-bulk packaging which, upon inspection, shows evidence of a reduction in... thickness of 1.0 mm (0.039 inch). (6) A previously used non-bulk packaging may be reused for the shipment of...

49 CFR 173.28 - Reuse, reconditioning and remanufacture of packagings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... non-bulk packaging. A non-bulk packaging used more than once must conform to the following provisions and limitations: (1) A non-bulk packaging which, upon inspection, shows evidence of a reduction in... thickness of 1.0 mm (0.039 inch). (6) A previously used non-bulk packaging may be reused for the shipment of...

49 CFR 173.28 - Reuse, reconditioning and remanufacture of packagings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... non-bulk packaging. A non-bulk packaging used more than once must conform to the following provisions and limitations: (1) A non-bulk packaging which, upon inspection, shows evidence of a reduction in... thickness of 1.0 mm (0.039 inch). (6) A previously used non-bulk packaging may be reused for the shipment of...

The role of interleukin-1β as a predictive biomarker and potential therapeutic target during clinical ex vivo lung perfusion.

PubMed

Andreasson, Anders S I; Borthwick, Lee A; Gillespie, Colin; Jiwa, Kasim; Scott, Jonathan; Henderson, Paul; Mayes, Jonny; Romano, Rosalba; Roman, Marius; Ali, Simi; Fildes, James E; Marczin, Nandor; Dark, John H; Fisher, Andrew J

2017-09-01

Extended criteria donor lungs deemed unsuitable for immediate transplantation can be reconditioned using ex vivo lung perfusion (EVLP). Objective identification of which donor lungs can be successfully reconditioned and will function well post-operatively has not been established. This study assessed the predictive value of markers of inflammation and tissue injury in donor lungs undergoing EVLP as part of the DEVELOP-UK study. Longitudinal samples of perfusate, bronchoalveolar lavage, and tissue from 42 human donor lungs undergoing clinical EVLP assessments were analyzed for markers of inflammation and tissue injury. Levels were compared according to EVLP success and post-transplant outcomes. Neutrophil adhesion to human pulmonary microvascular endothelial cells (HPMECs) conditioned with perfusates from EVLP assessments was investigated on a microfluidic platform. The most effective markers to differentiate between in-hospital survival and non-survival post-transplant were perfusate interleukin (IL)-1β (area under the curve = 1.00, p = 0.002) and tumor necrosis factor-α (area under the curve = 0.95, p = 0.006) after 30 minutes of EVLP. IL-1β levels in perfusate correlated with upregulation of intracellular adhesion molecule-1 in donor lung vasculature (R 2 = 0.68, p < 0.001) and to a lesser degree upregulation of intracellular adhesion molecule-1 (R 2 = 0.30, p = 0.001) and E-selectin (R 2 = 0.29, p = 0.001) in conditioned HPMECs and neutrophil adhesion to conditioned HPMECs (R 2 = 0.33, p < 0.001). Neutralization of IL-1β in perfusate effectively inhibited neutrophil adhesion to conditioned HPMECs (91% reduction, p = 0.002). Donor lungs develop a detectable and discriminatory pro-inflammatory signature in perfusate during EVLP. Blocking the IL-1β pathway during EVLP may reduce endothelial activation and subsequent neutrophil adhesion on reperfusion; this requires further investigation in vivo. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

26 CFR 2.1 - Statutory provisions; sections 511 and 905, Merchant Marine Act, 1936, and related statutes.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Commission shall determine to be suitable for use on the high seas or Great Lakes in carrying out the... consist of gain in the proportion that the part of the deposit consisting of gain bears to the total... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

26 CFR 2.1 - Statutory provisions; sections 511 and 905, Merchant Marine Act, 1936, and related statutes.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Commission shall determine to be suitable for use on the high seas or Great Lakes in carrying out the... consist of gain in the proportion that the part of the deposit consisting of gain bears to the total... reconstruction, reconditioning, or modernization of a vessel for exclusive use on the Great Lakes, including the...

The New City School. Profiles of Promise 5.

ERIC Educational Resources Information Center

Sandell, Stephen; Haley, Frances

Students and faculty of the New City School are housed in a single open room of a reconditioned building in an industrial area of St. Paul. Students come from St. Paul's neighborhood high schools, night school, and Open School. They may attend a nine-week session in the morning or afternoon for 2 1/2 hours. The eleven permanent staff members are…

Asymmetric B-factory note

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calderon, M.

Three main issues giving purpose to our visit to CERN, ESRF and DESY were to: assess the current thinking at CERN on whether Eta, the gas desorption coefficient, would continue to decrease with continued with continued beam cleaning, determine if the time between NEG reconditioning could be expanded, and acquire a knowledge of the basic fabrication processes and techniques for producing beam vacuum chambers of copper.

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

16 CFR 20.3 - Misrepresentation of the terms “rebuilt,” “factory rebuilt,” “remanufactured,” etc.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Misrepresentation of the terms ârebuilt,â âfactory rebuilt,â âremanufactured,â etc. 20.3 Section 20.3 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE REBUILT, RECONDITIONED AND OTHER USED AUTOMOBILE PARTS...

[Lung transplantation: supply and demand in France].

PubMed

Stern, M; Souilamas, R; Tixier, D; Mal, H

2008-10-01

For a decade lung transplantation has suffered from a lack of donor organs which aroused a national debate and led to planned action in collaboration with The French National Agency for Transplantation. Analysis of the stages of the process from potential donor to lung transplantation identified lung procurement as the main priority. An increase in the number of potential lung donors and revision of the acceptance criteria led to a doubling of the annual rate of lung transplantation in less than two years. In the near future we may solve the problem of donor family refusals and establish scientifically based criteria for lung acceptance to increase the rate of lung transplantation. Transplantation from non heart-beating donors and the reconditioning of ex vivo non acceptable lungs might supply additional organs to fulfill demand in the long term. The rate of lung transplantation activity in France doubled as the result of a dramatic increase of donor lung proposals. The current improvement in the results of lung transplantation might create new demands and generate future difficulties in the supply of donor lungs. New approaches, such as transplantation from non heart-beating donors and reconditioning ex vivo non acceptable lungs, should be examined in the near future.

Operant conditioning in the ant Myrmica sabuleti.

PubMed

Cammaerts, M C

2004-11-30

Operant conditioning could be obtained in the ant Myrmica sabuleti by presenting to the workers, during a six-day period, an apparatus containing either sugared water or meat as a reward. The conditioning obtained using sugared water as a reward was short lasting. A reconditioning was more persistent and lasted four hours. The ants' response was very precise, since they exhibited it only in front of an apparatus identical to that used during the training phase. Operant conditioning obtained using meat as a reward was more pronounced than that obtained by using sugared water, probably because meat is more valuable as a reward than sugar for the species studied, which is essentially a carnivorous one. Such a conditioning was rather persistent. Indeed, a first operant conditioning obtained by using meat as a reward could still be detected after seven hours, and a reconditioning was still significant after eight hours. One day after this eight-hour period without rewarding the ants, the response was higher again and a further day later, it was still significant. Since the operant conditioning is easy to perform and quantify and since the ants' response is very precise, such a conditioning can be used for further studying M. sabuleti workers' visual perception.

The Development of a Manhole Access Pipe-Crawler System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, M.

2000-09-19

The Savannah River Site's (SRS) Environmental Restoration Division (ERD) is in the process of reconditioning and decommissioning potentially contaminated facilities. Many of these facilities require inspection prior to remediation tasks. Remote inspections are necessary to reduce hazards and ensure the health and safety of workers and the public. To aid in ERD's efforts, the Remote and Specialty Equipment Systems (RSES) section developed a remote inspection vehicle referred to as the Manhole Access Pipecrawler System (MAPS). The MAPS is comprised of a battery-powered mobile vehicle, a portable control console, a cable reel enclosing 300 feet of tethered cable, and a deployment/retrievalmore » system. The components used in MAPS are predominantly standard off-the-shelf items to reduce fabrication costs. Parts were chosen based on size and durability to satisfy SRS operating conditions.« less

RECONDITIONING FUEL ELEMENTS

DOEpatents

Brandt, H.L.

1962-02-20

A process is given for decanning fuel elements that consist of a uranium core, an intermediate section either of bronze, silicon, Al-Si, and uranium silicide layers or of lead, Al-Si, and uranium silicide layers around said core, and an aluminum can bonded to said intermediate section. The aluminum can is dissolved in a solution of sodium hydroxide (9 to 20 wt%) and sodium nitrate (35 to 12 wt %), and the layers of the intermediate section are dissolved in a boiling sodium hydroxide solution of a minimum concentration of 50 wt%. (AEC) A method of selectively reducing plutonium oxides and the rare earth oxides but not uranium oxides is described which comprises placing the oxides in a molten solvent of zinc or cadmium and then adding metallic uranium as a reducing agent. (AEC)

"To Improve upon Hints of Things": Illustrating Isaac Newton.

PubMed

Schilt, Cornelis J

2016-01-01

When Isaac Newton died in 1727 he left a rich legacy in terms of draft manuscripts, encompassing a variety of topics: natural philosophy, mathematics, alchemy, theology, and chronology, as well as papers relating to his career at the Mint. One thing that immediately strikes us is the textuality of Newton's legacy: images are sparse. Regarding his scholarly endeavours we witness the same practice. Newton's extensive drafts on theology and chronology do not contain a single illustration or map. Today we have all of Newton's draft manuscripts as witnesses of his working methods, as well as access to a significant number of books from his own library. Drawing parallels between Newton's reading practices and his natural philosophical and scholarly work, this paper seeks to understand Newton's recondite writing and publishing politics.

[COMBINED IMMUNOTHERAPY OF RECONDITIONAL CHRONIC NON-SPECIFIC VULVOVAGINITIS IN IMMUNOCOMPROMISED GIRLS].

PubMed

Nesterova, I; Kovaleva, S; Chudilova, G; Lomtatidze, L; Krutova, V; Aslanian, I; Tulendinova, A; Malinovskaya, V

2017-05-01

Nonspecific chronic vulvovaginitis (CNV) is often a clinical indicator of immune deficiency, especially in young girls. The established violations of the functioning of various parts of the immune system (IS) in this pathology dictate the need to include in the complex of immunomodulatory therapy. The developed program of combined immunotherapy for immunocompromised girls allows to reduce the severity and duration of exacerbation of CNV, their frequency against the background of a significant reduction in the incidence of ARVI. Positive clinical effects were observed against the background of the restoration of the functioning of the IS. A protective effect was obtained (observation in a catamnesis for 1 year) - the duration of a clinically safe period increased from 6 to 11-11,5 months per year.

Method for modeling post-mortem biometric 3D fingerprints

NASA Astrophysics Data System (ADS)

Rajeev, Srijith; Shreyas, Kamath K. M.; Agaian, Sos S.

2016-05-01

Despite the advancements of fingerprint recognition in 2-D and 3-D domain, authenticating deformed/post-mortem fingerprints continue to be an important challenge. Prior cleansing and reconditioning of the deceased finger is required before acquisition of the fingerprint. The victim's finger needs to be precisely and carefully operated by a medium to record the fingerprint impression. This process may damage the structure of the finger, which subsequently leads to higher false rejection rates. This paper proposes a non-invasive method to perform 3-D deformed/post-mortem finger modeling, which produces a 2-D rolled equivalent fingerprint for automated verification. The presented novel modeling method involves masking, filtering, and unrolling. Computer simulations were conducted on finger models with different depth variations obtained from Flashscan3D LLC. Results illustrate that the modeling scheme provides a viable 2-D fingerprint of deformed models for automated verification. The quality and adaptability of the obtained unrolled 2-D fingerprints were analyzed using NIST fingerprint software. Eventually, the presented method could be extended to other biometric traits such as palm, foot, tongue etc. for security and administrative applications.

21 CFR 1.99 - Costs chargeable in connection with relabeling and reconditioning inadmissible imports.

Code of Federal Regulations, 2010 CFR

2010-04-01

... officer (GS-11/4) and the analyst (GS-12/4) is computed as follows: Hours Gross number of working hours in... d 208 Sick leave—13 d 104 Total 384 Net number of working hours 1,696 Gross number of working hours in 52 40-hr weeks 2,080 Working hour equivalent of Government contributions for employee retirement...

21 CFR 1.99 - Costs chargeable in connection with relabeling and reconditioning inadmissible imports.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 52 40-hr weeks 2,080 Less: 9 legal public holidays—New Years Day, Washington's Birthday, Memorial Day... the hourly rate of regular pay of a grade GS-11/4 employee, except that such services performed by a... rate per hour equal to 266 percent of the hourly rate of regular pay of a grade GS-12/4 employee. The...

BEHAVIOR THERAPY FOR TRANSSEXUALISM

PubMed Central

Andrade, A. Chitra; Kumaraiah, V.; Mishra, H.; Chatterji, S.; Andrade, Chittaranjan

1995-01-01

Transsexualism is a rare disorder, and there is little literature available on its treatment. A case is presented of transsexualism with homosexual orientation in a 24 year old male. Since the disorder appeared to have behavioral antecedents, it was treated with a behavior therapy package comprising relaxation, aversion therapy with aversion relief, modelling, hypnosis, orgasmic reconditioning, behavioral counselling and sex education. Therapy resulted in normalization of gender identity, but the homosexual orientation persisted. PMID:21743738

Marginal microleakage of triage sealant under different moisture contamination.

PubMed

Peng, Yawen; Stark, Paul C; Rich, Alfred; Loo, Cheen Y

2011-01-01

Glass ionomer sealants (GISs) are promoted in pediatric dentistry for their moisture-friendly properties. This study's purpose was to investigate the marginal leakage of a glass ionomer sealant (Fuji Triage) under different moisture environments. Eighty extracted teeth were distributed into 4 groups: (1) control; (2) saliva contamination with 1-second air-thinning; (3) saliva contamination with 10 seconds of air-drying; and (4) saliva contamination with reconditioning. Sealants were placed after contamination. All extracted teeth underwent thermocycling followed by 1% methylene blue dye and distilled water wash. All extracted teeth were then sectioned buccolingually into 3 cross-sections and examined at 60X under a stereomicroscope. Microleakage was assessed using a dye penetration scoring system (score=0-3). Data were analyzed with Kruskal-Wallis and Mann-Whitney tests. The control group showed significantly lower marginal leakage than the other 3 groups (P<.02). There was no statistically significant difference among the 3 contaminated groups (P>.34). Fuji Triage sealant had the least marginal leakage under a moisture-controlled environment. When saliva was introduced during the application of the material, microleakage significantly increased. When contamination occurred, 1-second air-thinning of the saliva, 10-second air-drying of the saliva, or reconditioning before sealant application did not show a difference in decreasing microleakage.

The role of the laterodorsal tegmental nucleus in methamphetamine conditioned place preference and locomotor activity.

PubMed

Dobbs, Lauren K; Cunningham, Christopher L

2014-05-15

Methamphetamine (METH) indirectly stimulates the laterodorsal tegmental nucleus (LDT) acetylcholine (ACh) neurons to increase ACh within the ventral tegmental area (VTA). LDT ACh inhibition attenuates METH and saline locomotor activity. The aim of these experiments was to determine whether LDT ACh contributes to METH conditioned place preference (CPP). C57BL/6J mice received a bilateral electrolytic or sham lesion of the LDT. After recovery, mice received alternating pairings of METH (0.5 mg/kg) and saline with distinct tactile floor cues over 8 days. During preference tests, mice were given access to both floor types and time spent on each was recorded. Mice were tested again after exposure to both extinction and reconditioning trials. Brains were then processed for choline acetyltransferase immunohistochemistry to label LDT ACh neurons. Lesioned mice had significantly fewer LDT ACh neurons and showed increased saline and METH locomotor activity during the first conditioning trial compared to sham mice. Locomotor activity (saline and METH) was negatively correlated with the number of LDT ACh neurons. Lesioned and sham mice showed similar METH CPP following conditioning, extinction and reconditioning trials. LDT ACh neurons are not necessary for METH reward as indexed by CPP, but may be important for basal and METH-induced locomotor activity. Copyright © 2014 Elsevier B.V. All rights reserved.

The 1996 NASA Aerospace Battery Workshop

NASA Technical Reports Server (NTRS)

Brewer, Jeffrey C. (Compiler)

1997-01-01

The 1996 Workshop was held on three consecutive days and was divided into five sessions. The first day consisted of a General Primary Battery Session and a Nickel-Hydrogen Battery On-Orbit Reconditioning Experience Focused Session. The second day consisted of a Nickel-Hydrogen Session and a Nickel-Cadmium Session. The third and final day was devoted to an Other Secondary Technologies Session which covered sodium-sulfur, nickel-zinc, nickel-metal hydride, and lithium ion technologies.

[Pain, from symptom to syndrome].

PubMed

Piano, Virginie

2017-05-01

Acute pain is a symptom enabling us to implement a response when faced with an attack. Chronic pain is complex and multifactorial. The care of the patient by a multidisciplinary team comprises the diagnosis of the pain and the putting in place of a treatment for each of its components. This includes physical reconditioning, adaptation strategies and work on the psychological elements relating to the representation of the pain. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

An Assessment of the Army’s Tactical Human Optimization, Rapid Rehabilitation and Reconditioning Program

DTIC Science & Technology

2013-01-01

TRANSPORTATION INTERNATIONAL AFFAIRS LAW AND BUSINESS NATIONAL SECURITY POPULATION AND AGING PUBLIC SAFETY SCIENCE AND TECHNOLOGY TERRORISM AND...the U.S. armed forces that are more technology -focused. The U.S. Air Force, for example, invests heavily in the upkeep and modernization of its...to write a prescription for medica- tion is the physical therapist, who must be a Category II privileged provider with additional education, training

Charge Control Investigation of Rechargeable Lithium Cells

NASA Technical Reports Server (NTRS)

Otzinger, B.; Somoano, R.

1984-01-01

An ambient temperature rechargeable Li-TiS2 cell was cycled under conditions which simulate aerospace applications. A novel charge/discharge state-of-charge control scheme was used, together with tapered current charging, to overcome deleterious effects associated with end-of-charge and end-of-discharge voltages. The study indicates that Li-TiS2 cells hold promise for eventual synchronous satellite-type applications. Problem areas associated with performance degradation and reconditioning effects are identified.

Evaluation of the Tactical Human Optimization, Rapid Rehabilitation, and Reconditioning Program (THOR3)

DTIC Science & Technology

2016-10-01

0.3-0.9). Evidence from this evaluation suggests that ARSOF Soldiers may benefit from participation in THOR3 compared to other human performance...factor that was not modifiable and one of the strongest risk factors for injury. Evidence from this evaluation suggests that Soldiers may benefit from...a Motorized Vehicle 7 2 Walking or Hiking 7 2 Rough Housing or Fighting 3 1 Stepping/Climbing 1 < 1 Repairing or maintaining equipment 1

Durability of structural lumber products after exposure at 82°C and 80% relative humidity

Treesearch

David W. Green; James W. Evans; Cherilyn A. Hatfield; Pamela J. Byrd

2005-01-01

Solid-sawn lumber (Douglas-fir, southern pine, Spruce–Pine–Fir, and yellow-poplar), laminated veneer lumber (Douglas-fir, southern pine, and yellow-poplar), and laminated strand lumber (aspen and yellow-poplar) were heated continuously at 82°C (180°F) and 80% relative humidity (RH) for periods of up to 24 months. The lumber was then reconditioned to room temperature at...

Clarifying the disagreements on various reuse options: Repair, recondition, refurbish and remanufacture.

PubMed

Gharfalkar, Mangesh; Ali, Zulfiqur; Hillier, Graham

2016-10-01

Earth's natural resources are finite. To be environmentally sustainable, it may not only be necessary to use them 'efficiently' but also 'effectively'. While we consider 'repair', 'recondition', 'refurbish' and 'remanufacture' to be 'reuse' options, not all researchers agree. Also, there is lack of clarity between the different options that are likely to be challenging for both; the policy makers who formulate policies aimed to encourage 'reuse' of 'waste' products and for decision makers to initiate appropriate action for recovering 'reusable resources' from 'waste streams'. This dichotomy could result into more 'waste' to landfill. A systematic analysis of peer reviewed literature is conducted to understand inconsistencies and/or lack of clarity that exist between the definitions or descriptions of identified `reuse' options. This article proposes a 'hierarchy of reuse options' that plots the relative positions of identified 'reuse' options vis-à-vis five variables, namely work content, energy requirement, cost, performance and warranty. Recommendations are made on how to incentivise original equipment manufacturers (OEMs) to 'remanufacture'. Finally, an alternative 'Type II Resource Effective Close-loop Model' is suggested and a conceptual 'Type II/2 Model of Resource Flows' that is restricted to the use of environmentally benign and renewable resources is introduced. These suggestions are likely to help decision makers to prioritise between 'reuse' options, drive resource effectiveness and also environmental sustainability. © The Author(s) 2016.

Cycle life test and failure model of nickel-hydrogen cells

NASA Technical Reports Server (NTRS)

Smithrick, J. J.

1983-01-01

Six ampere hour individual pressure vessel nickel hydrogen cells were charge/discharge cycled to failure. Failure as used here is defined to occur when the end of discharge voltage degraded to 0.9 volts. They were cycled under a low earth orbit cycle regime to a deep depth of discharge (80 percent of rated ampere hour capacity). Both cell designs were fabricated by the same manufacturer and represent current state of the art. A failure model was advanced which suggests both cell designs have inadequate volume tolerance characteristics. The limited existing data base at a deep depth of discharge (DOD) was expanded. Two cells of each design were cycled. One COMSAT cell failed at cycle 1712 and the other failed at cycle 1875. For the Air Force/Hughes cells, one cell failed at cycle 2250 and the other failed at cycle 2638. All cells, of both designs, failed due to low end of discharge voltage (0.9 volts). No cell failed due to electrical shorts. After cell failure, three different reconditioning tests (deep discharge, physical reorientation, and open circuit voltage stand) were conducted on all cells of each design. A fourth reconditioning test (electrolyte addition) was conducted on one cell of each design. In addition post cycle cell teardown and failure analysis were performed on the one cell of each design which did not have electrolyte added after failure.

Requirements for, and benefits of, environmentally sound and economically viable management of battery recycling in the Philippines in the wake of Basel Convention trade restrictions

NASA Astrophysics Data System (ADS)

Hoffmann, U.; Wilson, B.

The ban on the export of used lead-acid batteries (ULAB) from Annex VII to non-Annex VII countries pursuant to decision III/1 of the Basel Convention reduced the availability of imported scrap feedstock for battery recycling in the Philippines. As ULAB supply from other developing countries becomes scarcer, the ban is likely to encourage and enhance collection and recuperation for domestically generated scrap. From a short-term perspective, this study explores the technological and managerial opportunities for improving the environmental and occupational health performance of the formal battery recycling sector and unregulated reconditioning. From a medium- and long-term point of view, the study investigates restructuring the informal ULAB's collection and recycling sector. The objective has been to make the smaller battery recyclers and reconditioners in the informal sector part of an effective and efficient collection infrastructure that supports an environmentally sound secondary lead sector. This approach gradually phases out uncontrolled, inefficient and environmentally unacceptable methods of secondary lead recovery. Due attention has also been paid to the logistical peculiarities of an archipelago, in particular the regional spread of collection infrastructure, collection and shipment costs as well as the assurance of environmentally safe transport.

Summary Statement: Appropriate Medical Care for the Secondary School-Aged Athlete

PubMed Central

Almquist, Jon; Valovich McLeod, Tamara C; Cavanna, Angela; Jenkinson, Dave; Lincoln, Andrew E; Loud, Keith; Peterson, Bart C; Portwood, Craig; Reynolds, John; Woods, Thomas S

2008-01-01

Objective: To present the recommendations made by the Appropriate Medical Care for Secondary School-Aged Athletes Task Force and to summarize the subsequent monograph developed around 11 consensus points. Data Sources: The MEDLINE, CINAHL, and SportDiscus databases were searched for relevant literature regarding secondary school-aged athletes; health care administration; preparticipation physical examination; facilities; athletic equipment; emergency action planning; environmental conditions; recognition, evaluation, and treatment of injuries; rehabilitation and reconditioning; psychosocial consultation; nutrition; and prevention strategies. Conclusions and Recommendations: Organizations that sponsor athletic programs for secondary school-aged athletes should establish an athletic health care team to ensure that appropriate medical care is provided to all participants. The 11 consensus points provide a framework—one that is supported by the medical literature and case law—for the development of an athletic health care team and for assigning responsibilities to the team, administrators, and staff members of institutions sponsoring secondary school and club-level athletic programs. PMID:18668175

System Modeling of Metabolic Heat Regenerated Temperature Swing Adsorption (MTSA) Subassembly for Prototype Design

NASA Technical Reports Server (NTRS)

Bower, Chad; Padilla, Sebastian; Iacomini, Christie; Paul, Heather L.

2009-01-01

This paper describes modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly: the sorbent bed, a sublimation (cooling) heat exchanger (SHX), and a condensing icing (warming) heat exchanger (CIHX). The primary function of the MTSA, removing carbon dioxide from a ventilation loop, is performed via the sorbent bed. The CIHX is used to heat the sorbent bed for desorption and to remove moisture from the ventilation loop while the SHX is alternately employed to cool the sorbent bed via sublimation of a spray of water at low pressure to prepare the reconditioned bed for the next cycle. This paper describes a system level model of the MTSA as developed in Thermal Desktop and SINDA/FLUINT including assumptions on geometry and physical phenomena, modeling methodology and relevant pa ra mete rizatio ns. Several areas of particular modeling interest are discussed. In the sorbent bed, capture of the translating CO2 saturation front and associated local energy and mass balance in both adsorbing and desorbing modes is covered. The CIHX poses particular challenges for modeling in SINDA/FLUINT as accounting for solids states in fluid submodels are not a native capability. Methods for capturing phase change and latent heat of ice as well as the transport properties across a layer of low density accreted frost are developed. This extended modeling capacity is applicable to temperatures greater than 258 K. To extend applicability to the minimum device temperature of 235 K, a method for a mapped transformation of temperatures from below the limit temperatures to some value above is given along with descriptions for associated material property transformations and the resulting impacts to total heat and mass transfer. Similar considerations are shown for the SHX along with assumptions for flow mechanics and resulting model methods for sublimation in a flow.

Structural changes and damage of single-crystal turbine blades during life tests of an aviation gas turbine engine

NASA Astrophysics Data System (ADS)

Ospennikova, O. G.; Orlov, M. R.; Kolodochkina, V. G.; Nazarkin, R. M.

2015-04-01

The irreversible structural changes of the single-crystal ZhS32-VI nickel superalloy blades of a high-pressure turbine that occur during life tests of a gas turbine engine are studied. The main operation damages in the hottest section of the blade airfoil are found to be the fracture of the heat-resistant coating in the leading edge and the formation of thermomechanical fatigue cracks. The possibility of reconditioning repair of the blades is considered.

Closeup view of the aft fuselage of the Orbiter Discovery ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close-up view of the aft fuselage of the Orbiter Discovery on the starboard side looking forward. This view is of the attach surface for the Orbiter Maneuvering System/Reaction Control System (OMS/RCS) Pod. The OMS/RCS pods are removed for processing and reconditioning at another facility. This view was taken from a service platform in the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Reuse of secondhand TVs exported from Japan to the Philippines.

PubMed

Yoshida, Aya; Terazono, Atsushi

2010-06-01

The trade of secondhand electrical and electronic equipment (EEE) from developed to developing countries has become a growing environmental issue owing to concerns about improper recycling of these goods in developing countries. We followed a 12-m cargo container of cathode-ray-tube color TVs exported from Japan to the Philippines in February 2008. We surveyed the number of TVs damaged in transport, as well as the number of malfunctioning TVs from this shipment. In addition, we present the results of interviews with 113 Filipino consumers who intended to buy secondhand EEE at nine secondhand shops in Metro Manila. Approximately 3% of the imported TVs were damaged upon arrival. The importer sold some of the units directly to local dealers, and kept the rest to repair, refurbish and resell. Approximately 40% of the imported TVs malfunctioned and needed repair in addition to basic reconditioning. Most interviewees indicated that they prefer to buy secondhand EEE because the prices are lower than those of brand-new products. Consumers indicated that they planned on using the product for an average of about 5years, but the actual period of use may be lower. Most end-of-life EEE in the Philippines is dismantled and recycled by unregulated companies and untrained individuals in markets or near landfill sites, and it is clear that a proper collection system and treatment methods are needed for e-waste. In addition to the material flow of secondhand TVs, we also discuss several economic aspects and appropriate control measures of the international reuse of secondhand TVs. Copyright 2010 Elsevier Ltd. All rights reserved.

Reuse of secondhand TVs exported from Japan to the Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshida, Aya, E-mail: ayoshida@nies.go.j; Terazono, Atsushi, E-mail: terazono@nies.go.j

The trade of secondhand electrical and electronic equipment (EEE) from developed to developing countries has become a growing environmental issue owing to concerns about improper recycling of these goods in developing countries. We followed a 12-m cargo container of cathode-ray-tube color TVs exported from Japan to the Philippines in February 2008. We surveyed the number of TVs damaged in transport, as well as the number of malfunctioning TVs from this shipment. In addition, we present the results of interviews with 113 Filipino consumers who intended to buy secondhand EEE at nine secondhand shops in Metro Manila. Approximately 3% of themore » imported TVs were damaged upon arrival. The importer sold some of the units directly to local dealers, and kept the rest to repair, refurbish and resell. Approximately 40% of the imported TVs malfunctioned and needed repair in addition to basic reconditioning. Most interviewees indicated that they prefer to buy secondhand EEE because the prices are lower than those of brand-new products. Consumers indicated that they planned on using the product for an average of about 5 years, but the actual period of use may be lower. Most end-of-life EEE in the Philippines is dismantled and recycled by unregulated companies and untrained individuals in markets or near landfill sites, and it is clear that a proper collection system and treatment methods are needed for e-waste. In addition to the material flow of secondhand TVs, we also discuss several economic aspects and appropriate control measures of the international reuse of secondhand TVs.« less

Does machine perfusion decrease ischemia reperfusion injury?

PubMed

Bon, D; Delpech, P-O; Chatauret, N; Hauet, T; Badet, L; Barrou, B

2014-06-01

In 1990's, use of machine perfusion for organ preservation has been abandoned because of improvement of preservation solutions, efficient without perfusion, easy to use and cheaper. Since the last 15 years, a renewed interest for machine perfusion emerged based on studies performed on preclinical model and seems to make consensus in case of expanded criteria donors or deceased after cardiac death donations. We present relevant studies highlighted the efficiency of preservation with hypothermic machine perfusion compared to static cold storage. Machines for organ preservation being in constant evolution, we also summarized recent developments included direct oxygenation of the perfusat. Machine perfusion technology also enables organ reconditioning during the last hours of preservation through a short period of perfusion on hypothermia, subnormothermia or normothermia. We present significant or low advantages for machine perfusion against ischemia reperfusion injuries regarding at least one primary parameter: risk of DFG, organ function or graft survival. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Multidisciplinary approach to obesity.

PubMed

Donini, L M; Donini, M L; Savina, C; Castellaneta, E; Coletti, C; Paolini, M; Scavone, L; Civale, C; Ceccarelli, P; Zaninotto, S; Tineri, M; Grossi, G; De Felice, M R; Cannella, C

2009-03-01

Obesity, associated with morbidity and mortality, is a complex disorder, characterised by an increase in fat mass (FM). Most authors agree in considering essential an integrated treatment made up of nutritional intervention, physical reconditioning programme and cognitive-behavioural psychotherapy. However, the feasibility is problematic and data in literature confirming the validity of this approach are poor. To verify the efficacy of a multidimensional approach (Nutritional Psycho-Physical Reconditioning - NPPR) in obesity treatment. All patients admitted from June 2002 to June 2004 (464 subjects) ranged from 18 to 65 years old, with a body mass index (BMI) >30 kg/m2 were included in the programme. After the nutritional status evaluation a standard dietetic treatment (group N) or an integrated and multidisciplinary obesity treatment (group NPPR) was proposed. In group NPPR treatment duration was significantly higher (142.6+/-26 vs 48.6+/-55 days - p=0.000), while the drop-out amount was definitely lower (5.5 vs 54.4%; p=0.000). Weight loss compared to the initial weight and the difference between initial and final FM resulted significantly higher in group NNPR. Subjects in NPPR obtained a higher increase in the distance covered in a 6-minute walk test (59.9+/-19 vs 40.5+/-17 m; p=0.04) and in muscular strength. State and trait anxiety, mood and quality of life scores improved in NPPR subjects while remained substantially stable in group N. An integrated approach to obesity is the way to be pursued in order to obtain important and at least short-term results.

Opposite effects of fear conditioning and extinction on dendritic spine remodelling.

PubMed

Lai, Cora Sau Wan; Franke, Thomas F; Gan, Wen-Biao

2012-02-19

It is generally believed that fear extinction is a form of new learning that inhibits rather than erases previously acquired fear memories. Although this view has gained much support from behavioural and electrophysiological studies, the hypothesis that extinction causes the partial erasure of fear memories remains viable. Using transcranial two-photon microscopy, we investigated how neural circuits are modified by fear learning and extinction by examining the formation and elimination of postsynaptic dendritic spines of layer-V pyramidal neurons in the mouse frontal association cortex. Here we show that fear conditioning by pairing an auditory cue with a footshock increases the rate of spine elimination. By contrast, fear extinction by repeated presentation of the same auditory cue without a footshock increases the rate of spine formation. The degrees of spine remodelling induced by fear conditioning and extinction strongly correlate with the expression and extinction of conditioned fear responses, respectively. Notably, spine elimination and formation induced by fear conditioning and extinction occur on the same dendritic branches in a cue- and location-specific manner: cue-specific extinction causes formation of dendritic spines within a distance of two micrometres from spines that were eliminated after fear conditioning. Furthermore, reconditioning preferentially induces elimination of dendritic spines that were formed after extinction. Thus, within vastly complex neuronal networks, fear conditioning, extinction and reconditioning lead to opposing changes at the level of individual synapses. These findings also suggest that fear memory traces are partially erased after extinction.

High-Throughput Analysis of Methylmalonic Acid in Serum, Plasma, and Urine by LC-MS/MS. Method for Analyzing Isomers Without Chromatographic Separation.

PubMed

Kushnir, Mark M; Nelson, Gordon J; Frank, Elizabeth L; Rockwood, Alan L

2016-01-01

Measurement of methylmalonic acid (MMA) plays an important role in the diagnosis of vitamin B12 deficiency. Vitamin B12 is an essential cofactor for the enzymatic carbon rearrangement of methylmalonyl-CoA (MMA-CoA) to succinyl-CoA (SA-CoA), and the lack of vitamin B12 leads to elevated concentrations of MMA. Presence of succinic acid (SA) complicates the analysis because mass spectra of MMA and SA are indistinguishable, when analyzed in negative ion mode and the peaks are difficult to resolve chromatographically. We developed a method for the selective analysis of MMA that exploits the significant difference in fragmentation patterns of di-butyl derivatives of the isomers MMA and SA in a tandem mass spectrometer when analyzed in positive ion mode. Tandem mass spectra of di-butyl derivatives of MMA and SA are very distinct; this allows selective analysis of MMA in the presence of SA. The instrumental analysis is performed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive ion mode, which is, in combination with selective extraction of acidic compounds, is highly selective for organic acids with multiple carboxyl groups (dicarboxylic, tricarboxylic, etc.). In this method organic acids with a single carboxyl group are virtually undetectable in the mass spectrometer; the only organic acid, other than MMA, that is detected by this method is its isomer, SA. Quantitative measurement of MMA in this method is performed using a deconvolution algorithm, which mathematically resolves the signal corresponding to MMA and does not require chromatographic resolution of the MMA and SA peaks. Because of its high selectivity, the method utilizes isocratic chromatographic separation; reconditioning and re-equilibration of the chromatographic column between injections is unnecessary. The above features of the method allow high-throughput analysis of MMA with analysis cycle time of 1 min.

A high reliability battery management system

NASA Technical Reports Server (NTRS)

Moody, M. H.

1986-01-01

Over a period of some 5 years Canadian Astronautics Limited (CAL) has developed a system to autonomously manage, and thus prolong the life of, secondary storage batteries. During the development, the system was aimed at the space vehicle application using nickel cadmium batteries, but is expected to be able to enhance the life and performance of any rechargeable electrochemical couple. The system handles the cells of a battery individually and thus avoids the problems of over, and under, drive that inevitably occur in a battery of cells managed by an averaging system. This individual handling also allow cells to be totally bypassed in the event of failure, thus avoiding the losses associated with low capacity, partial short circuit, and the catastrophe of open circuit. The system has an optional capability of managing redundant batteries simultaneously, adding the advantage of on line reconditioning of one battery, while the other maintains the energy storage capability of the overall system. As developed, the system contains a dedicated, redundant, microprocessor, but the capability exists to have this computing capability time shared, or remote, and operating through a data link. As adjuncts to the basic management system CAL has developed high efficiency, polyphase, power regulators for charge and discharge power conditioning.

Post space mission lumbo-pelvic neuromuscular reconditioning: a European perspective.

PubMed

Evetts, Simon N; Caplan, Nick; Debuse, Dorothée; Lambrecht, Gunda; Damann, Volker; Petersen, Nora; Hides, Julie

2014-07-01

Long-duration exposure to the space environment causes physical adaptations that are deleterious to optimal functioning on Earth. Post-mission rehabilitation traditionally concentrates on regaining general muscle strength, neuromuscular control, and lumbo-pelvic stability. A particular problem is muscle imbalance caused by the hypertrophy of the flexor and atrophy of the extensor and local lumbo-pelvic muscles, increasing the risk of post-mission injury. A method currently used in European human spaceflight to aid post-mission recovery involves a motor control approach, focusing initially on teaching voluntary contraction of specific lumbo-pelvic muscles and optimizing spinal position, progressing to functional retraining in weight bearing positions. An alternative approach would be to use a Functional Readaptive Exercise Device to appropriately recruit this musculature, thus complementing current rehabilitation programs. Advances in post-mission recovery of this nature may both improve astronaut healthcare and aid terrestrial healthcare through more effective treatment of low back pain and accelerated post bed rest rehabilitation.

Study of modification methods of probes for critical-dimension atomic-force microscopy by the deposition of carbon nanotubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ageev, O. A., E-mail: ageev@sfedu.ru; Bykov, Al. V.; Kolomiitsev, A. S.

2015-12-15

The results of an experimental study of the modification of probes for critical-dimension atomicforce microscopy (CD-AFM) by the deposition of carbon nanotubes (CNTs) to improve the accuracy with which the surface roughness of vertical walls is determined in submicrometer structures are presented. Methods of the deposition of an individual CNT onto the tip of an AFM probe via mechanical and electrostatic interaction between the probe and an array of vertically aligned carbon nanotubes (VACNTs) are studied. It is shown that, when the distance between the AFM tip and a VACNT array is 1 nm and the applied voltage is withinmore » the range 20–30 V, an individual carbon nanotube is deposited onto the tip. On the basis of the results obtained in the study, a probe with a carbon nanotube on its tip (CNT probe) with a radius of 7 nm and an aspect ratio of 1:15 is formed. Analysis of the CNT probe demonstrates that its use improves the resolution and accuracy of AFM measurements, compared with the commercial probe, and also makes it possible to determine the roughness of the vertical walls of high-aspect structures by CD-AFM. The results obtained can be used to develop technological processes for the fabrication and reconditioning of special AFM probes, including those for CD-AFM, and procedures for the interoperational express monitoring of technological process parameters in the manufacturing of elements for micro- and nanoelectronics and micro- and nanosystem engineering.« less

Effect of a nutritional reconditioning program for thin dairy cattle on body weight, carcass quality, and fecal pathogen shedding.

PubMed

Maier, Gabriele U; Hoar, Bruce R; Stull, Carolyn L; Kass, Philip H; Villanueva, Veronica; Maas, John

2011-12-15

To assess changes in body weight, carcass quality, and fecal pathogen shedding in cull dairy cows fed a high-energy ration for 28 or 56 days prior to slaughter. Randomized clinical trial. 31 adult Holstein dairy cows. Cows were randomly assigned to a control (immediate slaughter) group or a 28-day or 56-day feeding group. Cows in the feeding groups received a high-energy feed and were weighed every 7 days. Carcasses were evaluated by USDA employees. Fecal and blood samples were collected at the start and end of the feeding periods. Body condition score and adjusted preliminary yield grade were significantly increased in both feeding groups, compared with values for the control group; body weight, hot carcass weight, dressing percentage, and ribeye area were significantly increased after 56 days, but not after 28 days, compared with values for the control group. Average daily gain and marbling score were significantly lower after feeding for 28 days versus after 56 days. Prevalence of Escherichia coli O157:H7 shedding in feces decreased from 14% to 5.6%, but this difference was not significant. Cows seropositive for antibodies against bovine leukemia virus that had signs of lymphoma and lame cows had a low average daily gain. Net loss was $71.32/cow and $112.80/cow for the 28-day and 56-day feeding groups, respectively. Feeding market dairy cows improved body condition and carcass quality. Cows seropositive for antibodies against bovine leukemia virus that have signs of lymphoma and lame cows might be poor candidates for reconditioning.

Strategic Factors on Interpreting Remanufacturing Quality-Certifying Framework to Address Warranty Aftermarket for Malaysian Industry

NASA Astrophysics Data System (ADS)

Mohamed, N.; Saman, M. Z. M.; Sharif, S.; Hamzah, H. S.

2018-03-01

While the concept of remanufacturing is gaining popularity globally, literature and theory on strategic decision-making on certifying for warranty in this area remain limited. A strategic and establish concept flow is developed based on extensive literature review and surveys with experienced experts who are dealing with remanufactured, reconditioned, rebuilt and reused components. The remanufacturing research on evaluating quality assurance of remanufactured component targets macro-level parameters and the indicators which must be confirmed for evaluation. The strategic remanufacturing factors identified from the literature review are discussed in a brainstorming session with a number of remanufacturing researchers and academic experts. The study is further broadened by industrial surveys and case studies to justify the inputs on developing a framework to certify remanufactured components. Preliminary results have established the key factors of remanufacturing quality control that might lead to the strict quality assurance of remanufactured components. Later, the developed framework can be used as a benchmarking tool to certify remanufactured components and warranty issuance. The findings serve as the foundation for further research concerning Original Equipment Manufacturer (OEM) or Original Equipment Remanufacturer (OER) and Independent Equipment Remanufacturer (IER) in the Malaysian Remanufacturing Industry.

Operations to Research: Communication of Lessons Learned

NASA Technical Reports Server (NTRS)

Fogarty, Jennifer

2009-01-01

This presentation explores ways to build upon previous spaceflight experience and communicate this knowledge to prepare for future exploration. An operational approach is highlighted, focusing on selection and retention standards (disease screening and obtaining medical histories); pre-, in-, and post-flight monitoring (establishing degrees of bone loss, skeletal muscle loss, cardiovascular deconditioning, medical conditions, etc.); prevention, mitigation, or treatment (in-flight countermeasures); and, reconditioning, recovery, and reassignment (post-flight training regimen, return to pre-flight baseline and flight assignment). Experiences and lessons learned from the Apollo, Skylab, Shuttle, Shuttle-Mir, International Space Station, and Orion missions are outlined.

Microwave assisted solvent extraction and coupled-column reversed-phase liquid chromatography with UV detection use of an analytical restricted-access-medium column for the efficient multi-residue analysis of acidic pesticides in soils.

PubMed

Hogendoom, E A; Huls, R; Dijkman, E; Hoogerbrugge, R

2001-12-14

A screening method has been developed for the determination of acidic pesticides in various types of soils. Methodology is based on the use of microwave assisted solvent extraction (MASE) for fast and efficient extraction of the analytes from the soils and coupled-column reversed-phase liquid chromatography (LC-LC) with UV detection at 228 nm for the instrumental analysis of uncleaned extracts. Four types of soils, including sand, clay and peat, with a range in organic matter content of 0.3-13% and ten acidic pesticides of different chemical families (bentazone, bromoxynil, metsulfuron-methyl, 2,4-D, MCPA, MCPP, 2,4-DP, 2,4,5-T, 2,4-DB and MCPB) were selected as matrices and analytes, respectively. The method developed included the selection of suitable MASE and LC-LC conditions. The latter consisted of the selection of a 5-microm GFF-II internal surface reversed-phase (ISRP, Pinkerton) analytical column (50 x 4.6 mm, I.D.) as the first column in the RAM-C18 configuration in combination with an optimised linear gradient elution including on-line cleanup of sample extracts and reconditioning of the columns. The method was validated with the analysis of freshly spiked samples and samples with aged residues (120 days). The four types of soils were spiked with the ten acidic pesticides at levels between 20 and 200 microg/kg. Weighted regression of the recovery data showed for most analyte-matrix combinations, including freshly spiked samples and aged residues, that the method provides overall recoveries between 60 and 90% with relative standard deviations of the intra-laboratory reproducibility's between 5 and 25%; LODs were obtained between 5 and 50 microg/kg. Evaluation of the data set with principal component analysis revealed that the parameters (i) increase of organic matter content of the soil samples and (ii) aged residues negatively effect the recovery of the analytes.

Exercise prescription for patients with multiple sclerosis; potential benefits and practical recommendations.

PubMed

Halabchi, Farzin; Alizadeh, Zahra; Sahraian, Mohammad Ali; Abolhasani, Maryam

2017-09-16

Multiple sclerosis (MS) can result in significant mental and physical symptoms, specially muscle weakness, abnormal walking mechanics, balance problems, spasticity, fatigue, cognitive impairment and depression. Patients with MS frequently decrease physical activity due to the fear from worsening the symptoms and this can result in reconditioning. Physicians now believe that regular exercise training is a potential solution for limiting the reconditioning process and achieving an optimal level of patient activities, functions and many physical and mental symptoms without any concern about triggering the onset or exacerbation of disease symptoms or relapse. Appropriate exercise can cause noteworthy and important improvements in different areas of cardio respiratory fitness (Aerobic fitness), muscle strength, flexibility, balance, fatigue, cognition, quality of life and respiratory function in MS patients. Aerobic exercise training with low to moderate intensity can result in the improvement of aerobic fitness and reduction of fatigue in MS patients affected by mild or moderate disability. MS patients can positively adapt to resistance training which may result in improved fatigue and ambulation. Flexibility exercises such as stretching the muscles may diminish spasticity and prevent future painful contractions. Balance exercises have beneficial effects on fall rates and better balance. Some general guidelines exist for exercise recommendation in the MS population. The individualized exercise program should be designed to address a patient's chief complaint, improve strength, endurance, balance, coordination, fatigue and so on. An exercise staircase model has been proposed for exercise prescription and progression for a broad spectrum of MS patients. Exercise should be considered as a safe and effective means of rehabilitation in MS patients. Existing evidence shows that a supervised and individualized exercise program may improve fitness, functional capacity and quality of life as well as modifiable impairments in MS patients.

Liposomal Encapsulation Enzymes: From Medical Applications to Kinetic Characteristics.

PubMed

Jahadi, M; Khosravi-Darani, K

2017-01-01

Liposomes and nanoliposomes as small vesicles composed of phospholipid bilayer (entrapping one or more hydrophilic or lipophilic components) have recently found several potential applications in medicine and food industry. These vesicles may protect the core materials from moisture, heat and other extreme conditions. They may also provide controlled release of various bioactive agents, including food ingredients at the right place and time. Potential applications of enzyme-loaded liposomes are in the medical or biomedical field, particularly for the enzymereplacement therapy, as well as cheese industry for production of functional foods with improved health beneficial impacts on the consumer. Encapsulation process has a recondite impact on enzymes. In fact, liposome preparation techniques may alter the pH and temperature optima, affinity of the enzyme to substrate (Km), and maximum rate of reaction (Vmax). In addition, in this paper, the impact of process variables on the kinetic characteristics of enzymes encapsulated in liposomes was investigated. Also, the effects of enzyme entrapment in liposomes, prepared by different methods, on the catalytic efficiency of enzyme, as well as its kinetic properties and stability compared to native (free) enzymes has been reviewed.

Development of the central nervous system functions in rat pups prenatally exposed to alcohol (study on the behavioural teratology of ethanol in CFY rat pups).

PubMed

Lehotzky, K; Ungváry, G; Szeberényi, J M; Kiss, A

1988-01-01

As a model of fetal alcohol syndrome (FAS) the rate of the maturation of the functions of the central nervous system was studied in the offspring of pregnant CFY rats receiving (from the 7th-15th day of gestation) either oral ethanol treatment or liquid diet containing ethanol. Both types of exposure caused numerous behavioural impairments, besides high perinatal mortality also the opening of the eyes and ears, and the appearance of postural reflexes were delayed. The newborn rats could be characterized by hyperactivity and weak motor coordination. The learning capacity, the avoidance conditioned reflexes was the poorest in the case of the offspring of mothers kept on liquid diet, containing alcohol, the latency of the conditioned response was significantly lenghtened. During reconditioning, in the case of the sexually already mature pups, the weakest performance was observed in the offspring of mothers having received oral alcohol treatment. This findings indicated, on one hand, that the retardation ceased and, on the other, that the learning and memory impairments caused by oral alcohol exposure was persistent. Following prenatal alcohol exposure carried out by different methods the neurotoxic effect, the retardation of the rate of maturation of the central nervous functions, and the adaptive mechanisms were all affected to different extent. Besides alcohol exposure also other factors (relative protein insufficiency, malnutrition) may be involved in the pathomechanism of the above mentioned phenomena.

Reuse of assembly systems: a great ecological and economical potential for facility suppliers

NASA Astrophysics Data System (ADS)

Weule, Hartmut; Buchholz, Carsten

2001-02-01

In addition to the consumer goods, capital goods offer a great potential for ecological and economic optimization. In view of this fact the project WiMonDi (Re-Use of Assembly Systems as new Business Fields), started in September 1998, focuses a marketable Remanufacturing and Re-Use of modules and components of assembly systems by using technically and organizationally continuous concepts. The objective of the closed Facility-Management-System is to prolong the serviceable lifespan of assembly facilities through the organized dismantling, refurbishment and reconditioning of the assembly facilities as well as their components. Therefore, it is necessary to develop easible and methodical strategies to realize a workable Re-Use concept. Within the project the focus is based on the optimization of Re-Use-strategies - the direct Re-Use, the Re-Use including Refurbishment as well as Material Recycling. The decision for an optimal strategy depends on economical (e.g. residual value, cost/benefit of relevant processes, etc.), ecological (e.g. pollutant components /substances), etc.) and technical parameters (e.g. reliability, etc.). For the purpose to integrate the total cost-of-ownership of products or components, WiMonDi integrates the costs of the use of products as well as the Re-Use costs/benefits. To initiate the conception of new distribution and user models between the supplier and the user of assembly facilities the described approach is conducted in close cooperation between Industry and University.

[Early attachement relationships and epigenetic customization].

PubMed

Rocchi, Giordana; Serio, Valentina; Carluccio, Giuseppe Mattia; Marini, Isabella; Meuti, Valentina; Zaccagni, Michela; Giacchetti, Nicoletta; Aceti, Franca

2015-01-01

Recently, new findings in epigenetic science switched the focus from the observation of physiological intragenomic dynamics to the idea of an environmental co-construction of phenotypic expression. In psichodynamic field, objectual relations and attachement theoreticians emphasized the interpersonal dimension of individual development, focusing the attention on the relational matrix of self organization. The construction of stable affective-behavioral traits throughout different parenting styles has actually found a coincidence in ethological studies, which have explored the epigenetic processes underlying the relationship between caregiving and HPA stress responsiveness. An adequate parenting style seems to support affective regulation throughout psychobiological hidden moderators, which would tend to rebalance the physiological systems homeostasis; an unconfident attachment style would promote, on the other hand, the allostatic load rise. Sites of longlife epigenetic susceptibility have also been identified in humans; although associated with risk of maladaptive developing in adverse environmental conditions, they seem to confer protection under favorable conditions. This persisting possibility of reorganization of stable traits throughout lifetime, which seems to be activated by a relevant environmental input, grant to significant relationships, and to therapeutical one as well, an implicit reconditioning potential which could result into the configuration of new stable affective-behavioral styles.

How does modifying a DEM to reflect known hydrology affect subsequent terrain analysis?

NASA Astrophysics Data System (ADS)

Callow, John Nikolaus; Van Niel, Kimberly P.; Boggs, Guy S.

2007-01-01

SummaryMany digital elevation models (DEMs) have difficulty replicating hydrological patterns in flat landscapes. Efforts to improve DEM performance in replicating known hydrology have included a variety of soft (i.e. algorithm-based approaches) and hard techniques, such as " Stream burning" or "surface reconditioning" (e.g. Agree or ANUDEM). Using a representation of the known stream network, these methods trench or mathematically warp the original DEM to improve how accurately stream position, stream length and catchment boundaries replicate known hydrological conditions. However, these techniques permanently alter the DEM and may affect further analyses (e.g. slope). This paper explores the impact that commonly used hydrological correction methods ( Stream burning, Agree.aml and ANUDEM v4.6.3 and ANUDEM v5.1) have on the overall nature of a DEM, finding that different methods produce non-convergent outcomes for catchment parameters (such as catchment boundaries, stream position and length), and differentially compromise secondary terrain analysis. All hydrological correction methods successfully improved calculation of catchment area, stream position and length as compared to using the DEM without any modification, but they all increased catchment slope. No single method performing best across all categories. Different hydrological correction methods changed elevation and slope in different spatial patterns and magnitudes, compromising the ability to derive catchment parameters and conduct secondary terrain analysis from a single DEM. Modification of a DEM to better reflect known hydrology can be useful, however knowledge of the magnitude and spatial pattern of the changes are required before using a DEM for subsequent analyses.

Laser Metal Deposition as Repair Technology for Stainless Steel and Titanium Alloys

NASA Astrophysics Data System (ADS)

Graf, Benjamin; Gumenyuk, Andrey; Rethmeier, Michael

In a repair process chain, damaged areas or cracks can be removed by milling and subsequently be reconditioned with new material deposition. The use of laser metal deposition has been investigated for this purpose. The material has been deposited into different groove shapes, using both stainless steel and Ti-6Al-4 V. The influence of welding parameters on the microstructure and the heat affected zone has been studied. The parameters have been modified in order to achieve low heat input and consequently low distortion as well as low metallurgical impact. Finally, an evaluation of the opportunities for an automatized repair process is made.

Modeling Of Metabolic Heat Regenerated Temperature Swing Adsorption (MTSA) Subassembly For Prototype Design

NASA Technical Reports Server (NTRS)

Bower, Chad E.; Padilla, Sebastian A.; Iacomini, Christie S.; Paul, Heather L.

2010-01-01

This paper describes modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly: a sorbent bed, a sublimation (cooling) heat exchanger (SHX), and a condensing icing (warming) heat exchanger (CIHX). The primary function of the MTSA, removing carbon dioxide from a space suit Portable Life Support System (PLSS) ventilation loop, is performed via the sorbent bed. The CIHX is used to heat the sorbent bed for desorption and to remove moisture from the ventilation loop while the SHX is alternately employed to cool the sorbent bed via sublimation of a spray of water at low pressure to prepare the reconditioned bed for the next cycle. This paper describes subsystem heat a mass transfer modeling methodologies relevant to the description of the MTSA subassembly in Thermal Desktop and SINDA/FLUINT. Several areas of particular modeling interest are discussed. In the sorbent bed, capture of the translating carbon dioxide (CO2) front and associated local energy and mass balance in both adsorbing and desorbing modes is covered. The CIHX poses particular challenges for modeling in SINDA/FLUINT as accounting for solids states in fluid submodels are not a native capability. Methods for capturing phase change and latent heat of ice as well as the transport properties across a layer of low density accreted frost are developed. This extended modeling capacity is applicable to temperatures greater than 258 K. To extend applicability to the minimum device temperature of 235 K, a method for a mapped transformation of temperatures from below the limit temperatures to some value above is given along with descriptions for associated material property transformations and the resulting impacts to total heat and mass transfer. Similar considerations are given for the SHX along with functional relationships for areal sublimation rates as limited by flow mechanics in t1he outlet duct.

Performance of Nickel-Cadmium Batteries on the GOES I-K Series of Weather Satellites

NASA Technical Reports Server (NTRS)

Singhal, Sat P.; Rao, Gopalakrishna M.; Alsbach, Walter G.

1997-01-01

The US National Oceanic and Atmospheric Administration (NOAA) operates the Geostationary Operational Environmental Satellite (GOES) spacecraft (among others) to support weather forecasting, severe storm tracking, and meteorological research by the National Weather Service (NWS). The latest in the GOES series consists of 5 spacecraft (originally named GOES I-M), three of which are in orbit and two more in development. Each of five spacecraft carry two Nickel-Cadmium batteries, with batteries designed and manufactured by Space Systems Loral (SS/L) and cells manufactured by Gates Aerospace Batteries (sold to SAFT in 1993). The battery, which consists of 28 cells with a 12 Ah capacity, provides the spacecraft power needs during the ascent phase and during the semi-annual eclipse seasons lasting for approximately 45 days each. The maximum duration eclipses are 72 minutes long which result in a 60 percent depth of discharge (DOD) of the batteries. This paper provides a description of the batteries, reconditioning setup, DOD profile during a typical eclipse season, and flight performance from the 3 launched spacecraft (now GOES 8, 9, and 10) in orbit.

NASA's Integrated Instrument Simulator Suite for Atmospheric Remote Sensing from Spaceborne Platforms (ISSARS) and Its Role for the ACE and GPM Missions

NASA Technical Reports Server (NTRS)

Tanelli, Simone; Tao, Wei-Kuo; Hostetler, Chris; Kuo, Kwo-Sen; Matsui, Toshihisa; Jacob, Joseph C.; Niamsuwam, Noppasin; Johnson, Michael P.; Hair, John; Butler, Carolyn;

Performance of Nickel-Cadmium Batteries on the GOES 1-K Series of Weather Satellites

NASA Technical Reports Server (NTRS)

Singhal, Sat P.; Alsbach, Walter G.; Rao, Gopalakrishna M.

1998-01-01

The US National Oceanic and Atmospheric Administration (NOAA) operates the Geostationary Operational Environmental Satellite (GOES) spacecraft (among others) to support weather forecasting, severe storm tracking, and meteorological research by the National Weather Service (NWS). The latest in the GOES series consists of five spacecraft (originally named GOES 1-M), three of which are in orbit and and two more in development. Each of the five spacecraft carries two Nickel-Cadmium battery, with batteries designed by Space Systems Loral (SS/L) and cells manufactured by Gates Aerospace Batteries (sold to SAFT in 1993). The battery, which consists of 28 cells with a 12 Ah capacity, provides the spacecraft power needs during the ascent phase and during the semi-annual eclipse seasons lasting for approximately 45 days each. The maximum duration eclipses are 72 minutes long which result in a 60 percent depth of discharge (DOD) of the batteries. This paper provides a description of the batteries, reconditioning setup, DOD profile during a typical eclipse season, and flight performance from the three launched spacecraft (now GOES 8, 9, and 10) in orbit.

A prescription for turning self-pay accounts into revenue.

PubMed

Koenig, Scott

2010-01-01

The antidote for a healthy bottom line is a streamlined payment recovery process from self-pay patients. Due to the current high unemployment rate and a resulting spike in self-pay patients, CFOs must be proactive and identify self-pay debt recovery solutions to stay in the black. It is vital to design an effective and efficient process that works for the specific needs of the hospital or practice. Utilizing metrics, reconditioning patients to pay at point-of-service, training associates to appropriately request payment, and understanding the limitations of the business office are key elements to financial health. Identifying an accounts receivable management partner could significantly reduce headaches and strain on staff and time.

Marshall Space Flight Center battery activity

NASA Technical Reports Server (NTRS)

Lowery, Eric

1993-01-01

The topics covered are presented in viewgraph form and include a flight program history and in-house activities. Some of the in-house activities addressed include secondary battery/cell testing and Hubble Space Telescope Test data updates involving the NiCd type 40 test - battery 1 and 2, the NiCd type 41 test battery, the general electric battery, the NiCd six-battery system, the six four-cell packs, fourteen-cell pack, three four-cell packs, the NiH2 six-battery system, and the flight spare battery. A general test data update is also presented for the twelve-cell pack, the four four-cell packs, the reconditioning test, and planned Ni-MH testing.

Comparison of shear bond strength of brackets recycled using micro sandblasting and industrial methods.

PubMed

Montero, Manuela M Haro; Vicente, Ascensión; Alfonso-Hernández, Noelia; Jiménez-López, Manuel; Bravo-González, Luis-Alberto

2015-05-01

To evaluate in vitro the shear bond strength of brackets recycled by sandblasting with aluminum oxide particles of different sizes or reconditioned industrially after successive rebonding. Eighty brackets were bonded and debonded sequentially three times. After the first debonding, brackets were divided into four groups: (group 1) sandblasting with aluminum oxide particles of 25 μ, (group 2) 50 μ, and (group 3) 110 μ, and (group 4) industrial recycling. Bond strength and adhesive material remaining on debonded bracket bases were evaluated for each successive debond. No significant differences were detected between the four groups following the first recycle (P > .05). After the second recycle, bond strength was significantly greater for the industrially recycled group than the other groups (P < .016). When shear bond strength was compared within each recycling method, the bond strength of sandblasted brackets decreased with the increase of particle size and with each recycle; for the industrially recycled group, no significant differences were detected between the three sequences (P > .016). In the evaluation of bond material remnant, the industrially recycled group left significantly less bond material after successive recycling than the other groups did (P < .016). Within each recycling method, the adhesive remnant decreased significantly after successive debond (P < .016). Industrial recycling obtained better results than sandblasting after three successive debondings. The brackets' shear bond strength decreased as the size of the aluminum oxide particle used for sandblasting increased and as recycling was repeated.

Hydrologic investigations in the Araguaia-Tocantins River basin (Brazil)

USGS Publications Warehouse

Snell, Leonard J.

1979-01-01

The Araguaia-Tocantins River basin system of central and northern Brazil drains an area of about 770,000 square kilometers and has the potential for supporting large-scale developments. During a short visit to the headquarters of the Interstate Commission for the Araguaia-Tocantins Valley and to several stream-gaging stations in June 1964, the author reviewed the status of the streamflow and meteorological data-collection programs in relation to the streamflow and meteorological data-collection programs in relation to the pressing needs of development project studies. To provide data for areal and project-site studies and for main-stream sites, an initial network of 33 stream gaging stations was proposed, including the 7 stations then in operation. Suggestions were made in regard to operations, staffing and equipment. Organizational responsibilities for operations were found to be divided uncertainly. The Brazilian Meteorological Service had 15 synoptic stations in operation in and near the basin, some in need of reconditioning. Plans were at hand for the addition of 15 sites to the synoptic network and for limited data collection at 27 other sites. The author proposed collection of precipitation data at about 50 other locations to achieve a more representative areal distribution. Temperature, evaporation, and upper-air data sites were suggested to enhance the prospective hydrometeorological studies. (USGS)

New insights into polyurethane biodegradation and realistic prospects for the development of a sustainable waste recycling process.

PubMed

Cregut, Mickael; Bedas, M; Durand, M-J; Thouand, G

2013-12-01

Polyurethanes are polymeric plastics that were first used as substitutes for traditional polymers suspected to release volatile organic hazardous substances. The limitless conformations and formulations of polyurethanes enabled their use in a wide variety of applications. Because approximately 10 Mt of polyurethanes is produced each year, environmental concern over their considerable contribution to landfill waste accumulation appeared in the 1990s. To date, no recycling processes allow for the efficient reuse of polyurethane waste due to their high resistance to (a)biotic disturbances. To find alternatives to systematic accumulation or incineration of polyurethanes, a bibliographic analysis was performed on major scientific advances in the polyurethane (bio)degradation field to identify opportunities for the development of new technologies to recondition this material. Until polymers exhibiting oxo- or hydro-biodegradative traits are generated, conventional polyurethanes that are known to be only slightly biodegradable are of great concern. The research focused on polyurethane biodegradation highlights recent attempts to reprocess conventional industrial polyurethanes via microbial or enzymatic degradation. This review describes several wonderful opportunities for the establishment of new processes for polyurethane recycling. Meeting these new challenges could lead to the development of sustainable management processes involving polymer recycling or reuse as environmentally safe options for industries. The ability to upgrade polyurethane wastes to chemical compounds with a higher added value would be especially attractive. © 2013.

Midazolam treatment before re-exposure to contextual fear reduces freezing behavior and amygdala activity differentially in high- and low-anxiety rats.

PubMed

Skórzewska, Anna; Lehner, Małgorzata; Wisłowska-Stanek, Aleksandra; Turzyńska, Danuta; Sobolewska, Alicja; Krząścik, Paweł; Płaźnik, Adam

2015-02-01

The aim of this study was to examine the effects of benzodiazepine (midazolam) administration on rat conditioned fear responses and on local brain activity (c-Fos and CRF expressions) of low- (LR) and high- (HR)anxiety rats after the first and second contextual fear test sessions. The animals were divided into LR and HR groups based on the duration of their conditioned freezing response in the first contextual fear test. The fear-re-conditioned LR and HR animals (28 days later) had increased freezing durations compared with those durations during the first conditioned fear test. These behavioral effects were accompanied by increased c-Fos expression in the medial amygdala (MeA), the basolateral amygdala (BLA), and the paraventricular hypothalamic nuclei and elevated CRF expression in the MeA. All these behavioral and immunochemical effects of fear re-conditioning were stronger in the LR group compared with the effects in the HR group. Moreover, in the LR rats, the re-conditioning led to decreased CRF expression in the primary motor cortex (M1) and to increased CRF expression in the BLA. The pretreatment of rats with midazolam before the second exposure to the aversive context significantly attenuated the conditioned fear response, lowered the serum corticosterone concentration, decreased c-Fos and CRF expressions in the MeA and in the BLA, and increased CRF complex density in M1 area only in the LR group. These studies have demonstrated that LR rats are more sensitive to re-exposure to fear stimuli and that midazolam pretreatment was associated with modified brain activity in the amygdala and in the prefrontal cortex in this group of animals. The current data may facilitate a better understanding of the neurobiological mechanisms responsible for individual differences in the psychopathological processes accompanying some anxiety disorders characterized by stronger reactivity to re-exposure to stressful challenges, e.g., posttraumatic stress disorder. Copyright © 2013 Elsevier Inc. All rights reserved.

Lung transplantation from initially rejected donors after ex vivo lung reconditioning: the French experience.

PubMed

Sage, Edouard; Mussot, Sacha; Trebbia, Grégoire; Puyo, Philippe; Stern, Marc; Dartevelle, Philippe; Chapelier, Alain; Fischler, Marc

2014-11-01

Only 15% of brain death donors are considered suitable for lung transplantation (LTx). The normothermic ex vivo lung perfusion technique is used to potentially increase the availability of high-risk lung donors. We report our experience of LTx with initially rejected donors after ex vivo lung reconditioning (EVLR). From April 2011 to May 2013, we performed EVLR for 32 pairs of donor lungs deemed unsuitable for transplantation and rejected by the 11 French lung transplant teams. After EVLR, lungs with acceptable function were transplanted. During the same period, 81 double-lung transplantations (DLTx) were used as controls. During EVLR, 31 of 32 donor lungs recovered physiological function with a median PO2/FiO2 ratio increasing from 274 (range 162-404) mmHg to 511 (378-668) mmHg at the end of EVLR (P < 0.0001). Thirty-one DLTx were performed. The incidence of primary graft dysfunction 72 h after LTx was 9.5% in the EVLR group and 8.5% in the control group (P = 1). The median time of extubation, intensive care unit and hospital lengths of stay were 1, 9 and 37 days in the EVLR group and 1 (P = 0.17), 6 (P = 0.06) and 28 days (P = 0.09) in the control group, respectively. Thirty-day mortality rates were 3.3% (n = 1) in the EVLR group and 3.7% (n = 3) in the control group (P = 0.69). One-year survival rates were 93% in the EVLR group and 91% in the control group. EVLR is a reliable and repeatable technique that offers a significant increase of available donors. The results of LTx with EVLR lungs are similar to those obtained with conventional donors. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

The recondite intricacies of Zeeman Doppler mapping

NASA Astrophysics Data System (ADS)

Stift, M. J.; Leone, F.; Cowley, C. R.

2012-02-01

We present a detailed analysis of the reliability of abundance and magnetic maps of Ap stars obtained by Zeeman Doppler mapping (ZDM). It is shown how they can be adversely affected by the assumption of a mean stellar atmosphere instead of appropriate 'local' atmospheres corresponding to the actual abundances in a given region. The essence of the difficulties was already shown by Chandrasekhar's picket-fence model. The results obtained with a suite of Stokes codes written in the ADA programming language and based on modern line-blanketed atmospheres are described in detail. We demonstrate that the high metallicity values claimed to have been found in chemically inhomogeneous (horizontally and vertically) Ap star atmospheres would lead to local temperature structures, continuum and line intensities, and line shapes that differ significantly from those predicted by a mean stellar atmosphere. Unfortunately, past applications of ZDM have consistently overlooked the intricate aspects of metallicity with their all-pervading effects. The erroneous assumption of a mean atmosphere for a spotted star can lead to phase-dependent errors of uncomfortably large proportions at varying wavelengths both in the Stokes I and V profiles, making precise mapping of abundances and magnetic field vectors largely impossible. The relation between core and wings of the Hβ line changes, too, with possible repercussions on the determination of gravity and effective temperature. Finally, a ZDM analysis of the synthetic Stokes spectra of a spotted star reveals the disturbing differences between the respective abundance maps based on a mean atmosphere on the one hand, and on appropriate 'local' atmospheres on the other. We then discuss what this all means for published ZDM results. Our discussion makes it clear that realistic local atmospheres must be used, especially if credible small-scale structures are to be obtained. Recondite: dealing with very profound, difficult or abstruse subject matter; requiring special knowledge to be understood ().

Quantitative Tester And Reconditioner For Hand And Arm

NASA Technical Reports Server (NTRS)

Engle, Gary; Bond, Malcolm; Naumann, Theodore

1993-01-01

Apparatus measures torques, forces, and motions of hand, wrist, forearm, elbow, and shoulder and aids in reconditioning muscles involved. Used to determine strengths and endurances of muscles, ranges of motion of joints, and reaction times. Provides quantitative data used to assess extent to which disuse, disease, or injury causes deterioration of muscles and of motor-coordination skills. Same apparatus serves as exercise machine to restore muscle performance by imposing electronically controlled, gradually increasing loads on muscles. Suitable for training and evaluating astronauts, field testing for workers' compensation claims, and physical therapy in hospitals. With aid of various attachments, system adapted to measure such special motions as pinching, rotation of wrist, and supination and pronation of the forearm. Attachments are gloves, wristlets, and sleeves.

Three-dimensional modeling of the cochlea by use of an arc fitting approach.

PubMed

Schurzig, Daniel; Lexow, G Jakob; Majdani, Omid; Lenarz, Thomas; Rau, Thomas S

2016-12-01

A cochlea modeling approach is presented allowing for a user defined degree of geometry simplification which automatically adjusts to the patient specific anatomy. Model generation can be performed in a straightforward manner due to error estimation prior to the actual generation, thus minimizing modeling time. Therefore, the presented technique is well suited for a wide range of applications including finite element analyses where geometrical simplifications are often inevitable. The method is presented for n=5 cochleae which were segmented using a custom software for increased accuracy. The linear basilar membrane cross sections are expanded to areas while the scalae contours are reconstructed by a predefined number of arc segments. Prior to model generation, geometrical errors are evaluated locally for each cross section as well as globally for the resulting models and their basal turn profiles. The final combination of all reconditioned features to a 3D volume is performed in Autodesk Inventor using the loft feature. Due to the volume generation based on cubic splines, low errors could be achieved even for low numbers of arc segments and provided cross sections, both of which correspond to a strong degree of model simplification. Model generation could be performed in a time efficient manner. The proposed simplification method was proven to be well suited for the helical cochlea geometry. The generated output data can be imported into commercial software tools for various analyses representing a time efficient way to create cochlea models optimally suited for the desired task.

Acute and chronic neuromuscular adaptations to local vibration training.

PubMed

Souron, Robin; Besson, Thibault; Millet, Guillaume Y; Lapole, Thomas

2017-10-01

Vibratory stimuli are thought to have the potential to promote neural and/or muscular (re)conditioning. This has been well described for whole-body vibration (WBV), which is commonly used as a training method to improve strength and/or functional abilities. Yet, this technique may present some limitations, especially in clinical settings where patients are unable to maintain an active position during the vibration exposure. Thus, a local vibration (LV) technique, which consists of applying portable vibrators directly over the tendon or muscle belly without active contribution from the participant, may present an alternative to WBV. The purpose of this narrative review is (1) to provide a comprehensive overview of the literature related to the acute and chronic neuromuscular changes associated with LV, and (2) to show that LV training may be an innovative and efficient alternative method to the 'classic' training programs, including in the context of muscle deconditioning prevention or rehabilitation. An acute LV application (one bout of 20-60 min) may be considered as a significant neuromuscular workload, as demonstrated by an impairment of force generating capacity and LV-induced neural changes. Accordingly, it has been reported that a training period of LV is efficient in improving muscular performance over a wide range of training (duration, number of session) and vibration (frequency, amplitude, site of application) parameters. The functional improvements are principally triggered by adaptations within the central nervous system. A model illustrating the current research on LV-induced adaptations is provided.

Attachment and spreadout study of 3T3 cells onto PP track etched films

NASA Astrophysics Data System (ADS)

Smolko, Eduardo; Mazzei, Ruben; Tadey, Daniel; Lombardo, Daniel

2001-12-01

Polymer surface modifications are obtained by the application of radiation treatments and other physico-chemical methods: fission fragment (ff) irradiation and etching. The biocompatibility of the surface is then observed by cell seeding and cell adhesion experiments. Approaches to improvement of the cell adhesion are obtained by different methods: for example, in PS, cell adhesion is improved after ion implantation; in PMMA, after bombarding the polymer, the surface is reconditioned with surfactants and proteins and in PVDF, cell adhesion is assayed on nuclear tracks membranes. In this work, we obtained important cell adhesion improvements in PP films by irradiation with swift heavy ions and subsequent etching of the nuclear tracks. We use BOPP (isotactic -25 μm thickness). Irrradiations were performed with a Cf-252 californium ff source. The source has a heavy ff and a light one, with 160-200 MeV energy divided among them corresponding to ff energies between 1 and 2 MeV/amu. A chemical etching procedure consisting of a solution of sulphuric acid and chromium three oxide at 85 °C was used. The 3T3 NIH fibroblast cell line was used for the cell adhesion experiment. Here we report for the first time, the results of a series of experiments by varying the ff fluence and the etching time showing that attachment and spreadout of cells are very much improved in this cell line according to the number of pores and the pore size.

Iron in the aquifer system of Suffolk County, New York, 1990–98

USGS Publications Warehouse

Brown, Craig J.; Walter, Donald A.; Colabufo, Steven

1999-01-01

High concentrations of dissolved iron in ground water contribute to the biofouling of public-supply wells, and the treatment and remediation of biofouling are costly. Water companies on Long Island, N.Y., spend several million dollars annually to recondition, redevelop, and replace supply wells and distribution lines; treat dissolved iron with sequestering agents or by filtration; and respond to iron-related complaints by customers. This report summarizes the results of studies done by the U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, to characterize the geochemistry and microbiology of iron in the aquifer system of Suffolk County. This information should be helpful for the siting and operation of supply wells.Concentrations of dissolved iron in Long Island's ground water, and the frequency of iron biofouling of wells, are highest in ground-water-discharge zones, particularly near the south shore. Ground water along a deep north-south flowpath of the Magothy aquifer in southwestern Suffolk County becomes anaerobic (oxygen deficient) and Fe(III) reducing at a distance of 8 to 10 kilometers south of the ground-water divide, and this change coincides with the downgradient increase in dissolved iron concentrations. The distribution of organic carbon, and the distribution and local variations in reactivity of Fe(III), in Magothy aquifer sediments have resulted in localized differences in redox microenvironments. For example, Fe(III)-reducing zones are associated with anaerobic conditions, where relatively large amounts of Fe(III) oxyhydroxide grain coatings are present, whereas sulfate-reducing zones are associated with lignite-rich lenses of silt and clay and appear to have developed in response to the depletion of available Fe(III) oxyhydroxides. The sulfate-reducing zones are characterized by relatively low concentrations of dissolved iron (resulting from iron-disulfide precipitation) and may be large enough to warrant water-supply development.Specific-capacity and water-quality data from wells screened in the Magothy aquifer indicate that water from biofouled wells contains higher median concentrations of total and dissolved iron and manganese, total phosphate, and dissolved sulfate, and lower median concentrations of dissolved oxygen and alkalinity, and lower pH, than does water from unaffected wells. Corresponding data from wells screened in the upper glacial aquifer indicate that water from biofouled wells contains higher median concentrations of total and dissolved manganese and dissolved sulfate, and lower pH, than does water from unaffected wells.Filamentous bacteria were detected in 31 (or 72 percent) of the 43 biofilm samples obtained from biofouled wells during reconditioning. The predominant filamentous organism was Gallionella ferruginea, a major biofouling agent in the upper glacial and Magothy aquifers throughout Suffolk County. Mineral-saturation indices indicate that most of the well-encrusting material is deposited when the wells are shut down. Furthermore, the use of treated water (which has a high pH and sometimes high concentrations of dissolved iron) for pump prelubrication when wells are shut down could greatly increase the rate of iron oxidation.

Glider kits cut truck ownership costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smiley, C.H.

1983-06-01

A glider kit consists of a new truck without the power train, with the customer supplying the engine, transmission, clutch, driveline and rear axles for mounting in a new frame and cab complete with steering axle, wiring harnesses, exhaust system and cooling system. Glider kits have long been regarded as a cost effective means of replacing accident or fire damaged late model vehicles. The financial advantages, assembly and remanufacturing are discussed. Points out that at a basic cost about one third of a new truck, a glider kit offers lower cost of borrowed capital, tax savings, and elimination of highmore » maintenance and downtime costs. The paper concludes that use of glider kits as an alternative to major repair or reconditioning or outright replacement of coal haulers presents some interesting options.« less

Accelerated and real-time geosynchronous life cycling test performance of nickel-hydrogen batteries

NASA Technical Reports Server (NTRS)

Green, R. S.

1985-01-01

RCA Astro-Electronics currently has four nickel-hydrogen storage battery modules (11 cells each) on test in simulated geosynchronous life cycle regimes. These battery modules are of identical design to those used on the GSTAR (GTE Satellite Corp.) and Spacenet (GTE Spacenet Corp.) communications satellites. The batteries are being tested using an automated test station equipped with computer-controlled environmental chambers and recording equipment. The two battery types, 30 ampere-hours and 40 ampere-hours (GSTAR and Spacenet, respectively), are being electrically cycled using identical 44-day eclipse sequences at 5 C and vary with respect to depth of discharge, recharge ratio, duration of accumulated suntime, and the use of a reconditioning sequence. The test parameters are outlined and the preliminary test data and results are presented.

Accountable disease management of spine pain.

PubMed

Smith, Matthew J

2011-09-01

The health care landscape has changed with new legislation addressing the unsustainable rise in costs in the US system. Low-value service lines caring for expensive chronic conditions have been targeted for reform; for better or worse, the treatment of spine pain has been recognized as a representative example. Examining the Patient Protection and Affordable Care Act and existing pilot studies can offer a preview of how chronic care of spine pain will be sustained. Accountable care in an organization capable of collecting, analyzing, and reporting clinical data and operational compliance is forthcoming. Interdisciplinary spine pain centers integrating surgical and medical management, behavioral medicine, physical reconditioning, and societal reintegration represent the model of high-value care for patients with chronic spine pain. Copyright © 2011 Elsevier Inc. All rights reserved.

Protective Equipment and Player Characteristics Associated With the Incidence of Sport-Related Concussion in High School Football Players

PubMed Central

McGuine, Timothy A.; Hetzel, Scott; McCrea, Michael; Brooks, M. Alison

2015-01-01

Background The incidence of sport-related concussion (SRC) in high school football is well documented. However, limited prospective data are available regarding how player characteristics and protective equipment affect the incidence of SRC. Purpose To determine whether the type of protective equipment (helmet and mouth guard) and player characteristics affect the incidence of SRC in high school football players. Design Cohort study; Level of evidence, 2. Methods Certified athletic trainers (ATs) at each high school recorded the type of helmet worn (brand, model, purchase year, and recondition status) by each player as well as information regarding players’ demographics, type of mouth guard used, and history of SRC. The ATs also recorded the incidence and days lost from participation for each SRC. Incidence of SRC was compared for various helmets, type of mouth guard, history of SRC, and player demographics. Results A total of 2081 players (grades 9–12) enrolled during the 2012 and/or 2013 football seasons (2287 player-seasons) and participated in 134,437 football (practice or competition) exposures. Of these players, 206 (9%) sustained a total of 211 SRCs (1.56/1000 exposures). There was no difference in the incidence of SRC (number of helmets, % SRC [95% CI]) for players wearing Riddell (1171, 9.1% [7.6%–11.0%]), Schutt (680, 8.7% [6.7%–11.1%]), or Xenith (436, 9.2% [6.7%–12.4%]) helmets. Helmet age and recondition status did not affect the incidence of SRC. The rate of SRC (hazard ratio [HR]) was higher in players who wore a custom mouth guard (HR = 1.69 [95% CI, 1.20–2.37], P <.001) than in players who wore a generic mouth guard. The rate of SRC was also higher (HR = 1.96 [95% CI, 1.40–2.73], P <.001) in players who had sustained an SRC within the previous 12 months (15.1% of the 259 players [95% CI, 11.0%–20.1%]) than in players without a previous SRC (8.2% of the 2028 players [95% CI, 7.1%–9.5%]). Conclusion Incidence of SRC was similar regardless of the helmet brand (manufacturer) worn by high school football players. Players who had sustained an SRC within the previous 12 months were more likely to sustain an SRC than were players without a history of SRC. Sports medicine providers who work with high school football players need to realize that factors other than the type of protective equipment worn affect the risk of SRC in high school players. PMID:25060072

The development, implementation and evaluation of clinical pathways for chronic obstructive pulmonary disease (COPD) in Saskatchewan: protocol for an interrupted times series evaluation.

PubMed

Rotter, Thomas; Plishka, Christopher; Hansia, Mohammed Rashaad; Goodridge, Donna; Penz, Erika; Kinsman, Leigh; Lawal, Adegboyega; O'Quinn, Sheryl; Buchan, Nancy; Comfort, Patricia; Patel, Prakesh; Anderson, Sheila; Winkel, Tanya; Lang, Rae Lynn; Marciniuk, Darcy D

2017-11-28

Chronic obstructive pulmonary disease (COPD) has substantial economic and human costs; it is expected to be the third leading cause of death worldwide by 2030. To minimize these costs high quality guidelines have been developed. However, guidelines alone rarely result in meaningful change. One method of integrating guidelines into practice is the use of clinical pathways (CPWs). CPWs bring available evidence to a range of healthcare professionals by detailing the essential steps in care and adapting guidelines to the local context. We are working with local stakeholders to develop CPWs for COPD with the aims of improving care while reducing utilization. The CPWs will employ several steps including: standardizing diagnostic training, unifying components of chronic disease care, coordinating education and reconditioning programs, and ensuring care uses best practices. Further, we have worked to identify evidence-informed implementation strategies which will be tailored to the local context. We will conduct a three-year research project using an interrupted time series (ITS) design in the form of a multiple baseline approach with control groups. The CPW will be implemented in two health regions (experimental groups) and two health regions will act as controls (control groups). The experimental and control groups will each contain an urban and rural health region. Primary outcomes for the study will be quality of care operationalized using hospital readmission rates and emergency department (ED) presentation rates. Secondary outcomes will be healthcare utilization and guideline adherence, operationalized using hospital admission rates, hospital length of stay and general practitioner (GP) visits. Results will be analyzed using segmented regression analysis. Funding has been procured from multiple stakeholders. The project has been deemed exempt from ethics review as it is a quality improvement project. Intervention implementation is expected to begin in summer of 2017. This project is expected to improve quality of care and reduce healthcare utilization. In addition it will provide evidence on the effects of CPWs in both urban and rural settings. If the CPWs are found effective we will work with all stakeholders to implement similar CPWs in surrounding health regions. Clinicaltrials.gov ( NCT03075709 ). Registered 8 March 2017.

Modeling a constant power load for nickel-hydrogen battery testing using SPICE

NASA Technical Reports Server (NTRS)

Bearden, Douglas B.; Lollar, Louis F.; Nelms, R. M.

1990-01-01

The effort to design and model a constant power load for the HST (Hubble Space Telescope) nickel-hydrogen battery tests is described. The constant power load was designed for three different simulations on the batteries: life cycling, reconditioning, and capacity testing. A dc-dc boost converter was designed to act as this constant power load. A boost converter design was chosen because of the low test battery voltage (4 to 6 VDC) generated and the relatively high power requirement of 60 to 70 W. The SPICE model was shown to consistently predict variations in the actual circuit as various designs were attempted. It is concluded that the confidence established in the SPICE model of the constant power load ensures its extensive utilization in future efforts to improve performance in the actual load circuit.

Lung transplantation

PubMed Central

Afonso, José Eduardo; Werebe, Eduardo de Campos; Carraro, Rafael Medeiros; Teixeira, Ricardo Henrique de Oliveira Braga; Fernandes, Lucas Matos; Abdalla, Luis Gustavo; Samano, Marcos Naoyuki; Pêgo-Fernandes, Paulo Manuel

2015-01-01

ABSTRACT Lung transplantation is a globally accepted treatment for some advanced lung diseases, giving the recipients longer survival and better quality of life. Since the first transplant successfully performed in 1983, more than 40 thousand transplants have been performed worldwide. Of these, about seven hundred were in Brazil. However, survival of the transplant is less than desired, with a high mortality rate related to primary graft dysfunction, infection, and chronic graft dysfunction, particularly in the form of bronchiolitis obliterans syndrome. New technologies have been developed to improve the various stages of lung transplant. To increase the supply of lungs, ex vivo lung reconditioning has been used in some countries, including Brazil. For advanced life support in the perioperative period, extracorporeal membrane oxygenation and hemodynamic support equipment have been used as a bridge to transplant in critically ill patients on the waiting list, and to keep patients alive until resolution of the primary dysfunction after graft transplant. There are patients requiring lung transplant in Brazil who do not even come to the point of being referred to a transplant center because there are only seven such centers active in the country. It is urgent to create new centers capable of performing lung transplantation to provide patients with some advanced forms of lung disease a chance to live longer and with better quality of life. PMID:26154550

Space research on organs and tissues

NASA Technical Reports Server (NTRS)

Tischler, Marc E.; Morey-Holton, Emily

1993-01-01

Studies in space on various physiological systems have and will continue to provide valuable information on how they adapt to reduced gravitational conditions, and how living in a 1 g (gravity) environment has guided their development. Muscle and bone are the most notable tissues that respond to unweighting caused by lack of gravity. The function of specific muscles and bones relates directly to mechanical loading, so that removal of 'normal forces' in space, or in bedridden patients, causes dramatic loss of tissue mass. The cardiovascular system is also markedly affected by reduced gravity. Adaptation includes decreased blood flow to the lower extremities, thus decreasing the heart output requirement. Return to 1 g is associated with a period of reconditioning due to the deconditioning that occurs in space. Changes in the cardiovascular system are also related to responses of the kidney and certain endocrine (hormone-producing) organs. Changes in respiratory function may also occur, suggesting an effect on the lungs, though this adaptation is poorly understood. The neurovestibular system, including the brain and organs of the inner ear, must adapt to the disorientation caused by lack of gravity. Preliminary findings have been reported for liver. Additionally, endocrine organs responsible for release of hormones such as insulin, growth hormone, glucocorticoids, and thyroid hormone may respond to spaceflight.

The “Picardie en Forme” Network: Federating Regional Health-enhancing Sports Resources

PubMed

Weissland, Thierry; Passavant, Éric; Allal, Aziz; Amiard, Valérie; Antczak, Boris; Manzo, Julie

2016-06-08

Initiated by the Regional Olympic and Sports Committee and the Regional Directorate of Youth, Sports and Social Cohesion, the “Picardie en Forme” network has been working since 2011 in favour of adults of all ages, with chronic noncommunicable or similar diseases, to encourage a gradual return to reassuring and perennial regular physical activity,. A first step consisted of organizing a care pathway based on two principles: inform general practitioners so that they can encourage their patients to be physically active by referring them to the network, develop a range of local sports by accrediting certain clubs with sports instructors who have been trained in the management of this specific population. In 2013, 121 users entered the network at the request of 61 doctors. 48 sports instructors were trained and 20 associations obtained the Picardie en Forme label. Comparison of the results of tests performed on entry in the network and then eight months later shows a general physical reconditioning of users, increasing their motivation and perceived physical value. However, despite these encouraging results, the network has difficulty retaining users, and maintaining the involvement of general practitioners and certain local partners. This article discusses the relevance of initial approaches and describes the changes made to sustain this regional network, which, for the first time, links sport, health and users.

Research to Operations: The Critical Transition

NASA Technical Reports Server (NTRS)

Fogarty, Jennifer A.

2009-01-01

Space Life Sciences Directorate (SLSD) specializes in transitioning technology and knowledge to medical operations. This activity encompasses funding a spectrum of research and technology efforts, such as understanding fundamental biological mechanisms altered by microgravity and executing technology watches for state of the art diagnostic imaging equipment. This broad spectrum approach to fulfilling the need to protect crewmember health and performance during long and short duration missions to the International Space Station, moon and Mars is made possible by having a line of site between research and operations. Currently, SLSD's line of site is articulated in a transition to medical practice (TMP) process. This process is designed to shepherd information and knowledge gained through fundamental and mechanistic research toward the development of an operational solution such as a pre-flight selection criteria; an in-flight countermeasure, monitoring capability or treatment; or a post-flight reconditioning program. The TMP process is also designed to assist with the customization of mature hardware or technology for NASA specific use. The benefits of this process are that the concept of operational usability is interjected early in the research, design, or acquisition phase, and stakeholders are involved early to identify requirements and also periodically asked to assess requirements compliance of research or technology development project. Currently a device known as the actiwatch is being assessed for the final transition to operational use. Specific examples of research to operations transition success help to illustrate the process and bolster communication between the research and medical operations communities.

Which kind of exercise is best in fibromyalgia therapeutic programmes? A practical review.

PubMed

Cazzola, M; Atzeni, F; Salaffi, F; Stisi, S; Cassisi, G; Sarzi-Puttini, P

2010-01-01

All of the specialists who deal in some way with fibromyalgia (FM) broadly agree that physical reconditioning programmes are useful, but it is not yet clear what type of physical activity is the most appropriate for different subsets of patients. The aim of this review was to examine the randomised controlled trials (RCTs) published between 1985 and August 2010 whose outcome measures indicate the effectiveness of different types of physical exercise (PE) on the main health domains affected by FM: pain, and physical and mental function. Studies that simultaneously used different types of PE or multimodal treatment strategies were excluded from the analysis, as were those in which the primary and secondary endpoints prevented any assessment of treatment efficacy in all three health domains. Twenty-seven studies were selected: 15 considered land-based physical aerobic exercise (PAE); seven exercises in water; and five muscle strengthening exercise (MSE). There was substantial uniformity in assessing the effectiveness of land- or water-based PAE and MSE in improving aerobic physical fitness (PF) and functional state. Water-based PAE offers some advantages over similarly intense land-based PAE in reducing spontaneous pain and improving depressive symptoms, but the data are insufficient to establish its overall superiority. Regardless of method, the latest findings concerning the neurophysiology of nociception indicate the fundamental importance of assigning workloads that do not exacerbate post-exercise pain.

Surface Functionalized Nanostructured Ceramic Sorbents for the Effective Collection and Recovery of Uranium from Seawater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chouyyok, Wilaiwan; Pittman, Jonathan W.; Warner, Marvin G.

2016-05-02

The ability to collect uranium from seawater offers the potential for a nearly limitless fuel supply for nuclear energy. We evaluated the use of functionalized nanostructured sorbents for the collection and recovery of uranium from seawater. Extraction of trace minerals from seawater and brines is challenging due to the high ionic strength of seawater, low mineral concentrations, and fouling of surfaces over time. We demonstrate that rationally assembled sorbent materials that integrate high affinity surface chemistry and high surface area nanostructures into an application relevant micro/macro structure enables collection performance that far exceeds typical sorbent materials. High surface area nanostructuredmore » silica with surface chemistries composed of phosphonic acid, phosphonates, 3,4 hydroxypyridinone, and EDTA showed superior performance for uranium collection. A few phosphorous-based commercial resins, specifically Diphonix and Ln Resin, also performed well. We demonstrate an effective and environmentally benign method of stripping the uranium from the high affinity sorbents using inexpensive nontoxic carbonate solutions. The cyclic use of preferred sorbents and acidic reconditioning of materials was shown to improve performance. Composite thin films composed of the nanostructured sorbents and a porous polymer binder are shown to have excellent kinetics and good capacity while providing an effective processing configuration for trace mineral recovery from solutions. Initial work using the composite thin films shows significant improvements in processing capacity over the previously reported sorbent materials.« less

NASA Tech Briefs, September 2011

NASA Technical Reports Server (NTRS)

2011-01-01

Topics covered include: Fused Reality for Enhanced Flight Test Capabilities; Thermography to Inspect Insulation of Large Cryogenic Tanks; Crush Test Abuse Stand; Test Generator for MATLAB Simulations; Dynamic Monitoring of Cleanroom Fallout Using an Air Particle Counter; Enhancement to Non-Contacting Stress Measurement of Blade Vibration Frequency; Positively Verifying Mating of Previously Unverifiable Flight Connectors; Radiation-Tolerant Intelligent Memory Stack - RTIMS; Ultra-Low-Dropout Linear Regulator; Excitation of a Parallel Plate Waveguide by an Array of Rectangular Waveguides; FPGA for Power Control of MSL Avionics; UAVSAR Active Electronically Scanned Array; Lockout/Tagout (LOTO) Simulator; Silicon Carbide Mounts for Fabry-Perot Interferometers; Measuring the In-Process Figure, Final Prescription, and System Alignment of Large; Optics and Segmented Mirrors Using Lidar Metrology; Fiber-Reinforced Reactive Nano-Epoxy Composites; Polymerization Initiated at the Sidewalls of Carbon Nanotubes; Metal-Matrix/Hollow-Ceramic-Sphere Composites; Piezoelectrically Enhanced Photocathodes; Iridium-Doped Ruthenium Oxide Catalyst for Oxygen Evolution; Improved Mo-Re VPS Alloys for High-Temperature Uses; Data Service Provider Cost Estimation Tool; Hybrid Power Management-Based Vehicle Architecture; Force Limit System; Levitated Duct Fan (LDF) Aircraft Auxiliary Generator; Compact, Two-Sided Structural Cold Plate Configuration; AN Fitting Reconditioning Tool; Active Response Gravity Offload System; Method and Apparatus for Forming Nanodroplets; Rapid Detection of the Varicella Zoster Virus in Saliva; Improved Devices for Collecting Sweat for Chemical Analysis; Phase-Controlled Magnetic Mirror for Wavefront Correction; and Frame-Transfer Gating Raman Spectroscopy for Time-Resolved Multiscalar Combustion Diagnostics.

Bilateral Diaphragmatic Paralysis in a Patient With Critical Illness Polyneuropathy

PubMed Central

Chen, Hsuan-Yu; Chen, Hung-Chen; Lin, Meng-Chih; Liaw, Mei-Yun

2015-01-01

Abstract Bilateral diaphragmatic paralysis (BDP) manifests as respiratory muscle weakness, and its association with critical illness polyneuropathy (CIP) was rarely reported. Here, we present a patient with BDP related to CIP, who successfully avoided tracheostomy after diagnosis and management. A 71-year-old male presented with acute respiratory failure after sepsis adequately treated. Repeated intubation occurred because of carbon dioxide retention after each extubation. After eliminating possible factors, septic shock-induced respiratory muscle weakness was suspected. Physical examination, a nerve conduction study, and chest ultrasound confirmed our impression. Pulmonary rehabilitation and reconditioning exercises were arranged, and the patient was discharged with a diagnosis of BDP. The diagnosis of BDP is usually delayed, and there are only sporadic reports on its association with polyneuropathy, especially in patients with preserved limb muscle function. Therefore, when physicians encounter patients that are difficult to wean from mechanical ventilation, CIP associated with BDP should be considered in the differential diagnosis. PMID:26252301

CFHR1-Modified Neural Stem Cells Ameliorated Brain Injury in a Mouse Model of Neuromyelitis Optica Spectrum Disorders.

PubMed

Shi, Kaibin; Wang, Zhen; Liu, Yuanchu; Gong, Ye; Fu, Ying; Li, Shaowu; Wood, Kristofer; Hao, Junwei; Zhang, Guang-Xian; Shi, Fu-Dong; Yan, Yaping

2016-11-01

A major hurdle for effective stem cell therapy is ongoing inflammation in the target organ. Reconditioning the lesion microenvironment may be an effective way to promote stem cell therapy. In this study, we showed that engineered neural stem cells (NSCs) with complement factor H-related protein 1, a complement inhibitor protein, can attenuate inflammatory infiltration and immune-mediated damage of astrocytes, an important pathogenic progress in patients with neuromyelitis optica spectrum disorders. Furthermore, we demonstrated that transplantation of the complement factor H-related protein 1-modified NSCs effectively blocked the complement activation cascade and inhibited formation of the membrane attack complex, thus contributing to the protection of endogenous and transplanted NSC-differentiated astrocytes. Therefore, manipulation of the lesion microenvironment contributes to a more effective cell replacement therapeutic strategy for autoimmune diseases of the CNS. Copyright © 2016 by The American Association of Immunologists, Inc.

Prestige Asymmetry in American Physics: Aspirations, Applications, and the Purloined Letter Effect.

PubMed

Martin, Joseph D

2017-12-01

Argument Why do similar scientific enterprises garner unequal public approbation? High energy physics attracted considerable attention in the late-twentieth-century United States, whereas condensed matter physics - which occupied the greater proportion of US physicists - remained little known to the public, despite its relevance to ubiquitous consumer technologies. This paper supplements existing accounts of this much remarked-upon prestige asymmetry by showing that popular emphasis on the mundane technological offshoots of condensed matter physics and its focus on human-scale phenomena have rendered it more recondite than its better-known sibling field. News reports about high energy physics emphasize intellectual achievement; reporting on condensed matter physics focuses on technology. And whereas frontier-oriented rhetoric of high energy physics communicates ideals of human potential, discoveries that smack of the mundane highlight human limitations and fail to resonate with the widespread aspirational vision of science - a consequence I call "the purloined letter effect."

On the efficiency of FES cycling: a framework and systematic review.

PubMed

Hunt, K J; Fang, J; Saengsuwan, J; Grob, M; Laubacher, M

2012-01-01

Research and development in the art of cycling using functional electrical stimulation (FES) of the paralysed leg muscles has been going on for around thirty years. A range of physiological benefits has been observed in clinical studies but an outstanding problem with FES-cycling is that efficiency and power output are very low. The present work had the following aims: (i) to provide a tutorial introduction to a novel framework and methods of estimation of metabolic efficiency using example data sets, and to propose benchmark measures for evaluating FES-cycling performance; (ii) to systematically review the literature pertaining specifically to the metabolic efficiency of FES-cycling, to analyse the observations and possible explanations for the low efficiency, and to pose hypotheses for future studies which aim to improve performance. We recommend the following as benchmark measures for assessment of the performance of FES-cycling: (i) total work efficiency, delta efficiency and stimulation cost; (ii) we recommend, further, that these benchmark measures be complemented by mechanical measures of maximum power output, sustainable steady-state power output and endurance. Performance assessments should be carried out at a well-defined operating point, i.e. under conditions of well controlled work rate and cadence, because these variables have a strong effect on energy expenditure. Future work should focus on the two main factors which affect FES-cycling performance, namely: (i) unfavourable biomechanics, i.e. crude recruitment of muscle groups, non-optimal timing of muscle activation, and lack of synergistic and antagonistic joint control; (ii) non-physiological recruitment of muscle fibres, i.e. mixed recruitment of fibres of different type and deterministic constant-frequency stimulation. We hypothesise that the following areas may bring better FES-cycling performance: (i) study of alternative stimulation strategies for muscle activation including irregular stimulation patterns (e.g. doublets, triplets, stochastic patterns) and variable frequency stimulation trains, where it appears that increasing frequency over time may be profitable; (ii) study of better timing parameters for the stimulated muscle groups, and addition of more muscle groups: this path may be approached using EMG studies and constrained numerical optimisation employing dynamic models; (iii) development of optimal stimulation protocols for muscle reconditioning and FES-cycle training.

Obesity treatment: results after 4 years of a Nutritional and Psycho-Physical Rehabilitation Program in an outpatient setting.

PubMed

Donini, Lorenzo M; Cuzzolaro, Massimo; Gnessi, Lucio; Lubrano, Carla; Migliaccio, Silvia; Aversa, Antonio; Pinto, Alessandro; Lenzi, Andrea

2014-06-01

Obesity is a chronic disease as well as a risk factor for cardiovascular, metabolic and osteoarticular diseases, affecting the psychosocial health and the quality of life. Recent evidence suggests that the adequate treatment of obesity should provide a multidimensional multidisciplinary approach including nutritional therapy, psycho-educational classes and physical reconditioning/motor rehabilitation. The aim of this approach should be to maintain the results over time with a positive impact on the obesity-related cardiovascular and metabolic risk. To evaluate the effectiveness of a multidisciplinary Nutritional and Psycho-Physical Reconditioning Program (NPPRP) in an outpatient setting. The observational prospective cohort study involved subjects, aged from 18 to 65 years, with a BMI >30 kg/m(2), who were followed up over 48 months. After the first nutritional and psychological examination, patients who refused NPPRP were treated according to standard nutrition procedures (SNT). Patients were followed through monthly medical examinations and then by annual telephonic structured interviews for 4 years. Changes in body weight, eating behavior, physical activity performance, and the occurrence of clinical obesity-related complications were considered as outcome measures. Of 464 enrolled patients, 161 (34.7%) took part in the follow-up. From the enrollment to the end of follow-up, weight loss was greater in the NPPRP group than in the SNP group (-8.08 ± 10 kg versus -3.0 ± 6 kg). After 4 years eating behavior improved in both groups. The percentage of patients who continued to perform physical activity was higher in the NPPRP group than in the SNT group (61.0 versus 34.1%). The SNT group reported complications more frequently than the NPPRP group: hypertension (19 versus 5.8%), dyslipidemia (19.4 versus 12.7%), and skeletal problems (26.9 versus 17.5%). The main reasons for drop-out from the rehabilitation program were logistic problems (distance or time) in both groups; disappointment was higher in the SNT group than in the NPPRP group (37.8 versus 15.6%). A multidimensional multidisciplinary approach including nutritional intervention and psycho-physical rehabilitation, set against a conventional diet therapy, was more effective in the long-term outcome of obesity with regard to weight loss, physical activity, possible eating disorders, and obesity-related complications.

Mesenchymal stromal cell-derived extracellular vesicles attenuate lung ischemia-reperfusion injury and enhance reconditioning of donor lungs after circulatory death.

PubMed

Stone, Matthew L; Zhao, Yunge; Robert Smith, J; Weiss, Mark L; Kron, Irving L; Laubach, Victor E; Sharma, Ashish K

2017-12-21

Lung ischemia-reperfusion (IR) injury after transplantation as well as acute shortage of suitable donor lungs are two critical issues impacting lung transplant patients. This study investigates the anti-inflammatory and immunomodulatory role of human mesenchymal stromal cells (MSCs) and MSC-derived extracellular vesicles (EVs) to attenuate lung IR injury and improve of ex-vivo lung perfusion (EVLP)-mediated rehabilitation in donation after circulatory death (DCD) lungs. C57BL/6 wild-type (WT) mice underwent sham surgery or lung IR using an in vivo hilar-ligation model with or without MSCs or EVs. In vitro studies used primary iNKT cells and macrophages (MH-S cells) were exposed to hypoxia/reoxygenation with/without co-cultures with MSCs or EVs. Also, separate groups of WT mice underwent euthanasia and 1 h of warm ischemia and stored at 4 °C for 1 h followed by 1 h of normothermic EVLP using Steen solution or Steen solution containing MSCs or EVs. Lungs from MSCs or EV-treated mice had significant attenuation of lung dysfunction and injury (decreased edema, neutrophil infiltration and myeloperoxidase levels) compared to IR alone. A significant decrease in proinflammatory cytokines (IL-17, TNF-α, CXCL1 and HMGB1) and upregulation of keratinocyte growth factor, prostaglandin E2 and IL-10 occurred in the BAL fluid from MSC or EV-treated mice after IR compared to IR alone. Furthermore, MSCs or EVs significantly downregulated iNKT cell-produced IL-17 and macrophage-produced HMGB1 and TNF-α after hypoxia/reoxygenation. Finally, EVLP of DCD lungs with Steen solution including MSCs or EVs provided significantly enhanced protection versus Steen solution alone. Co-cultures of MSCs or EVs with lung endothelial cells prevents neutrophil transendothelial migration after exposure to hypoxia/reoxygenation and TNF-α/HMGB1 cytomix. These results suggest that MSC-derived EVs can attenuate lung inflammation and injury after IR as well as enhance EVLP-mediated reconditioning of donor lungs. The therapeutic benefits of EVs are in part mediated through anti-inflammatory promoting mechanisms via attenuation of immune cell activation as well as prevention of endothelial barrier integrity to prevent lung edema. Therefore, MSC-derived EVs offer a potential therapeutic strategy to treat post-transplant IR injury as well as rehabilitation of DCD lungs.

Effect of Er:YAG Laser and Sandblasting in Recycling of Ceramic Brackets.

PubMed

Yassaei, Soghra; Aghili, Hossein; Hosseinzadeh Firouzabadi, Azadeh; Meshkani, Hamidreza

2017-01-01

Introduction: This study was performed to determine the shear bond strength of rebonded mechanically retentive ceramic brackets after recycling with Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser or sandblasting. Methods: Twenty-eight debonded ceramic brackets plus 14 intact new ceramic brackets were used in this study. Debonded brackets were randomly divided into 2 groups of 14. One group was treated by Er:YAG laser and the other with sandblasting. All the specimens were randomly bonded to 42 intact human upper premolars. The shear bond strength of all specimens was determined with a universal testing machine at a crosshead speed of 0.5 mm/min until bond failure occurred. The recycled bracket base surfaces were observed under a scanning electron microscope (SEM). Analysis of variance (ANOVA) and Tukey tests were used to compare the shear bond strength of the 3 groups. Fisher exact test was used to evaluate the differences in adhesive remnant index (ARI) scores. Results: The highest bond strength belonged to brackets recycled by Sandblasting (16.83 MPa). There was no significant difference between the shear bond strength of laser and control groups. SEM photographs showed differences in 2 recycling methods. The laser recycled bracket appeared to have as well-cleaned base as the new bracket. Although the sandblasted bracket photographs showed no remnant adhesives, remarkable micro-roughening of the base of the bracket was apparent. Conclusion: According to the results of this study, both Er:YAG laser and sandblasting were efficient to mechanically recondition retentive ceramic brackets. Also, Er:YAG laser did not change the design of bracket base while removing the remnant adhesives which might encourage its application in clinical practice.

Effect of Er:YAG Laser and Sandblasting in Recycling of Ceramic Brackets

PubMed Central

Yassaei, Soghra; Aghili, Hossein; Hosseinzadeh Firouzabadi, Azadeh; Meshkani, Hamidreza

2017-01-01

Introduction: This study was performed to determine the shear bond strength of rebonded mechanically retentive ceramic brackets after recycling with Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser or sandblasting. Methods: Twenty-eight debonded ceramic brackets plus 14 intact new ceramic brackets were used in this study. Debonded brackets were randomly divided into 2 groups of 14. One group was treated by Er:YAG laser and the other with sandblasting. All the specimens were randomly bonded to 42 intact human upper premolars. The shear bond strength of all specimens was determined with a universal testing machine at a crosshead speed of 0.5 mm/min until bond failure occurred. The recycled bracket base surfaces were observed under a scanning electron microscope (SEM). Analysis of variance (ANOVA) and Tukey tests were used to compare the shear bond strength of the 3 groups. Fisher exact test was used to evaluate the differences in adhesive remnant index (ARI) scores. Results: The highest bond strength belonged to brackets recycled by Sandblasting (16.83 MPa). There was no significant difference between the shear bond strength of laser and control groups. SEM photographs showed differences in 2 recycling methods. The laser recycled bracket appeared to have as well-cleaned base as the new bracket. Although the sandblasted bracket photographs showed no remnant adhesives, remarkable micro-roughening of the base of the bracket was apparent. Conclusion: According to the results of this study, both Er:YAG laser and sandblasting were efficient to mechanically recondition retentive ceramic brackets. Also, Er:YAG laser did not change the design of bracket base while removing the remnant adhesives which might encourage its application in clinical practice. PMID:28912939

Shuttle radar DEM hydrological correction for erosion modelling in small catchments

NASA Astrophysics Data System (ADS)

Jarihani, Ben; Sidle, Roy; Bartley, Rebecca

2016-04-01

Digital Elevation Models (DEMs) that accurately replicate both landscape form and processes are critical to support modelling of environmental processes. Catchment and hillslope scale runoff and sediment processes (i.e., patterns of overland flow, infiltration, subsurface stormflow and erosion) are all topographically mediated. In remote and data-scarce regions, high resolution DEMs (LiDAR) are often not available, and moderate to course resolution digital elevation models (e.g., SRTM) have difficulty replicating detailed hydrological patterns, especially in relatively flat landscapes. Several surface reconditioning algorithms (e.g., Smoothing) and "Stream burning" techniques (e.g., Agree or ANUDEM), in conjunction with representation of the known stream networks, have been used to improve DEM performance in replicating known hydrology. Detailed stream network data are not available at regional and national scales, but can be derived at local scales from remotely-sensed data. This research explores the implication of high resolution stream network data derived from Google Earth images for DEM hydrological correction, instead of using course resolution stream networks derived from topographic maps. The accuracy of implemented method in producing hydrological-efficient DEMs were assessed by comparing the hydrological parameters derived from modified DEMs and limited high-resolution airborne LiDAR DEMs. The degree of modification is dominated by the method used and availability of the stream network data. Although stream burning techniques improve DEMs hydrologically, these techniques alter DEM characteristics that may affect catchment boundaries, stream position and length, as well as secondary terrain derivatives (e.g., slope, aspect). Modification of a DEM to better reflect known hydrology can be useful, however, knowledge of the magnitude and spatial pattern of the changes are required before using a DEM for subsequent analyses.

Profiling inflammation and tissue injury markers in perfusate and bronchoalveolar lavage fluid during human ex vivo lung perfusion

PubMed Central

Andreasson, Anders S.I.; Karamanou, Danai M.; Gillespie, Colin S.; Özalp, Faruk; Butt, Tanveer; Hill, Paul; Jiwa, Kasim; Walden, Hannah R.; Green, Nicola J.; Borthwick, Lee A.; Clark, Stephen C.; Pauli, Henning; Gould, Kate F.; Corris, Paul A.; Ali, Simi; Dark, John H.

2017-01-01

Abstract OBJECTIVES: Availability of donor lungs suitable for transplant falls short of current demand and contributes to waiting list mortality. Ex vivo lung perfusion (EVLP) offers the opportunity to objectively assess and recondition organs unsuitable for immediate transplant. Identifying robust biomarkers that can stratify donor lungs during EVLP to use or non-use or for specific interventions could further improve its clinical impact. METHODS: In this pilot study, 16 consecutive donor lungs unsuitable for immediate transplant were assessed by EVLP. Key inflammatory mediators and tissue injury markers were measured in serial perfusate samples collected hourly and in bronchoalveolar lavage fluid (BALF) collected before and after EVLP. Levels were compared between donor lungs that met criteria for transplant and those that did not. RESULTS: Seven of the 16 donor lungs (44%) improved during EVLP and were transplanted with uniformly good outcomes. Tissue and vascular injury markers lactate dehydrogenase, HMGB-1 and Syndecan-1 were significantly lower in perfusate from transplanted lungs. A model combining IL-1β and IL-8 concentrations in perfusate could predict final EVLP outcome after 2 h assessment. In addition, perfusate IL-1β concentrations showed an inverse correlation to recipient oxygenation 24 h post-transplant. CONCLUSIONS: This study confirms the feasibility of using inflammation and tissue injury markers in perfusate and BALF to identify donor lungs most likely to improve for successful transplant during clinical EVLP. These results support examining this issue in a larger study. PMID:28082471

Transient acidosis while retrieving a fear-related memory enhances its lability

PubMed Central

Du, Jianyang; Price, Margaret P; Taugher, Rebecca J; Grigsby, Daniel; Ash, Jamison J; Stark, Austin C; Hossain Saad, Md Zubayer; Singh, Kritika; Mandal, Juthika; Wemmie, John A; Welsh, Michael J

2017-01-01

Attenuating the strength of fearful memories could benefit people disabled by memories of past trauma. Pavlovian conditioning experiments indicate that a retrieval cue can return a conditioned aversive memory to a labile state. However, means to enhance retrieval and render a memory more labile are unknown. We hypothesized that augmenting synaptic signaling during retrieval would increase memory lability. To enhance synaptic transmission, mice inhaled CO2 to induce an acidosis and activate acid sensing ion channels. Transient acidification increased the retrieval-induced lability of an aversive memory. The labile memory could then be weakened by an extinction protocol or strengthened by reconditioning. Coupling CO2 inhalation to retrieval increased activation of amygdala neurons bearing the memory trace and increased the synaptic exchange from Ca2+-impermeable to Ca2+-permeable AMPA receptors. The results suggest that transient acidosis during retrieval renders the memory of an aversive event more labile and suggest a strategy to modify debilitating memories. DOI: http://dx.doi.org/10.7554/eLife.22564.001 PMID:28650315

Heritage ethics: Toward a thicker account of nursing ethics.

PubMed

Fowler, Marsha D

2016-02-01

The key to understanding the moral identity of modern nursing and the distinctiveness of nursing ethics resides in a deeper examination of the extensive nursing ethics literature and history from the late 1800s to the mid 1960s, that is, prior to the "bioethics revolution". There is a distinctive nursing ethics, but one that falls outside both biomedical and bioethics and is larger than either. Were, there a greater corpus of research on nursing's heritage ethics it would decidedly recondition the entire argument about a distinctive nursing ethics. It would also provide a thicker account of nursing ethics than has been afforded thus far. Such research is dependent upon identifying, locating, accessing and, more importantly, sharing these resources. A number of important heritage ethics sources are identified so that researchers might better locate them. In addition, a bibliography of heritage ethics textbooks and a transcript of the earliest known journal article on nursing ethics in the US are provided. © The Author(s) 2015.

Rodent growth, behavior, and physiology resulting from flight on the Space Life Sciences-1 mission

NASA Technical Reports Server (NTRS)

Jahns, G.; Meylor, J.; Fast, T.; Hawes, N.; Zarow, G.

1992-01-01

A rodent-based spaceflight study is conducted to investigate physiological changes in rats vs humans and the effects of changes in the design of the Research Animal Holding Facility (RAHF) and the Animal Enclosure Module (AEM). Rats were housed in the AEM and the RAHF, and controls were kept in identical flight hardware on earth subjected to the same flight-environmental profile. Biosamples and organ weights are taken to compare the rats before and after flight, and food/water intake are also compared. Weight gain, body weight, and food consumptions in the flight rats are significantly lower than corresponding values for the control subjects. Flight rats tend to have smaller postexperiment spleens and hearts, and flight rats consumed more water in the AEM than in the RAHF. The rodents' behavior is analogous to humans with respect to physiological and reconditioning effects, showing that the rat is a good model for basic research into the effects of spaceflight on humans.

PCR-DGGE analysis of the microbial communities in three different Chinese "Baiyunbian" liquor fermentation starters.

PubMed

Xiong, Xiaomao; Hu, Yuanliang; Yan, Nanfeng; Huang, Yingna; Peng, Nan; Liang, Yunxiang; Zhao, Shumiao

2014-08-01

A systematic investigation was performed on the bacterial, Bacillus, fungal, and yeast communities of the three types of Daqu (mechanically prepared, manually prepared, and mixed prepared) used in Baiyunbian Company by reconditioning PCR-denaturing gradient gel electrophoresis (PCR-DGGE). The DGGE results showed that the microbes in the three types of Daqu were mainly thermotolerant and thermophilic microbes, and the most dominant bacterial species were Bacillus and Virgibacillus, followed by Lactobacillus and Trichococcus. Furthermore, the dominant fungi were found to be molds, such as Rasamsonia, Penicillium, Aspergillus, and Monascus, and the dominant yeasts were Saccharomyces cerevisiae, Saccharomycopsis fibuligera, Pichia anomala, and Debaryomyces hansenii. In general, the three types of Daqu showed slight differences in microbial communities, and the Shannon indexes (H') of the manually prepared and mechanically prepared Daqu were similar. The results suggest that mechanically prepared Daqu can replace manually prepared Daqu in liquor production, and this research provides useful information for liquor production and process improvement.

Photoemission experiments of a large area scandate dispenser cathode

NASA Astrophysics Data System (ADS)

Zhang, Huang; Liu, Xing-guang; Chen, Yi; Chen, De-biao; Jiang, Xiao-guo; Yang, An-min; Xia, Lian-sheng; Zhang, Kai-zhi; Shi, Jin-shui; Zhang, Lin-wen

2010-09-01

A 100-mm-diameter scandate dispenser cathode was tested as a photocathode with a 10 ns Nd:YAG laser (266 nm) on an injector test stand for linear induction accelerators. This thermionic dispenser cathode worked at temperatures ranging from room temperature to 930 °C (below or near the thermionic emission threshold) while the vacuum was better than 4×10 -7 Torr. The laser pulse was synchronized with a 120 ns diode voltage pulse stably and they were in single pulse mode. Emission currents were measured by a Faraday cup. The maximum peak current collected at the anode was about 100 A. The maximum quantum efficiency measured at low laser power was 2.4×10 -4. Poisoning effect due to residual gas was obvious and uninterrupted heating was needed to keep cathode's emission capability. The cathode was exposed to air one time between experiments and recovered after being reconditioned. Photoemission uniformity of the cathode was also explored by changing the laser spot's position.

An experimental investigation of preorgasmic reconditioning and postorgasmic deconditioning.

PubMed Central

Kantorowitz, D A

1978-01-01

The effects of pre- and postorgasmic presentation of moderately erotic cues were assessed in an analogue study. Eight heterosexual male volunteers (18 to 23 years) participated in three assessment (baseline, termination-of-treatment, and two- to three-month followup) and eight masturbatory conditioning sessions. Three slides of nude females of initially equal erotic value were paired respectively with the plateau, refractory, and resolution phases of the subjects' sexual cycles. Over treatment, stimuli paired with the plateau phase increased significantly in penile tumescence indices of eroticism; conversely, stimuli paired with the refractory phase decreased significantly. The conditioned effects on tumescence were largely extinguished at followup. While treatment did not alter short-term subjective indices of eroticism, stimuli presented during the refractory phase were rated significantly less erotic than the other stimuli at followup. The findings suggest that the "pairing" model of orgasmic conditioning is insufficient to account for previously reported clinical findings. A broader conceptualization of the mechanisms of orgasmic conditioning, and implications for treatment are discussed. PMID:649527

Operating Experience and Reliability Improvements on the 5 kW CW Klystron at Jefferson Lab

NASA Astrophysics Data System (ADS)

Nelson, R.; Holben, S.

1997-05-01

With substantial operating hours on the RF system, considerable information on reliability of the 5 kW CW klystrons has been obtained. High early failure rates led to examination of the operating conditions and failure modes. Internal ceramic contamination caused premature failure of gun potting material and ultimate tube demise through arcing or ceramic fracture. A planned course of repotting and reconditioning of approximately 300 klystrons, plus careful attention to operating conditions and periodic analysis of operational data, has substantially reduced the failure rate. It is anticipated that implementation of planned supplemental monitoring systems for the klystrons will allow most catastrophic failures to be avoided. By predicting end of life, tubes can be changed out before they fail, thus minimizing unplanned downtime. Initial tests have also been conducted on this same klystron operated at higher voltages with resultant higher output power. The outcome of these tests will provide information to be considered for future upgrades to the accelerator.

An experimental investigation of preorgasmic reconditioning and postorgasmic deconditioning.

PubMed

Kantorowitz, D A

1978-01-01

The effects of pre- and postorgasmic presentation of moderately erotic cues were assessed in an analogue study. Eight heterosexual male volunteers (18 to 23 years) participated in three assessment (baseline, termination-of-treatment, and two- to three-month followup) and eight masturbatory conditioning sessions. Three slides of nude females of initially equal erotic value were paired respectively with the plateau, refractory, and resolution phases of the subjects' sexual cycles. Over treatment, stimuli paired with the plateau phase increased significantly in penile tumescence indices of eroticism; conversely, stimuli paired with the refractory phase decreased significantly. The conditioned effects on tumescence were largely extinguished at followup. While treatment did not alter short-term subjective indices of eroticism, stimuli presented during the refractory phase were rated significantly less erotic than the other stimuli at followup. The findings suggest that the "pairing" model of orgasmic conditioning is insufficient to account for previously reported clinical findings. A broader conceptualization of the mechanisms of orgasmic conditioning, and implications for treatment are discussed.

Protective equipment and player characteristics associated with the incidence of sport-related concussion in high school football players: a multifactorial prospective study.

PubMed

McGuine, Timothy A; Hetzel, Scott; McCrea, Michael; Brooks, M Alison

2014-10-01

The incidence of sport-related concussion (SRC) in high school football is well documented. However, limited prospective data are available regarding how player characteristics and protective equipment affect the incidence of SRC. To determine whether the type of protective equipment (helmet and mouth guard) and player characteristics affect the incidence of SRC in high school football players. Cohort study; Level of evidence, 2. Certified athletic trainers (ATs) at each high school recorded the type of helmet worn (brand, model, purchase year, and recondition status) by each player as well as information regarding players' demographics, type of mouth guard used, and history of SRC. The ATs also recorded the incidence and days lost from participation for each SRC. Incidence of SRC was compared for various helmets, type of mouth guard, history of SRC, and player demographics. A total of 2081 players (grades 9-12) enrolled during the 2012 and/or 2013 football seasons (2287 player-seasons) and participated in 134,437 football (practice or competition) exposures. Of these players, 206 (9%) sustained a total of 211 SRCs (1.56/1000 exposures). There was no difference in the incidence of SRC (number of helmets, % SRC [95% CI]) for players wearing Riddell (1171, 9.1% [7.6%-11.0%]), Schutt (680, 8.7% [6.7%-11.1%]), or Xenith (436, 9.2% [6.7%-12.4%]) helmets. Helmet age and recondition status did not affect the incidence of SRC. The rate of SRC (hazard ratio [HR]) was higher in players who wore a custom mouth guard (HR = 1.69 [95% CI, 1.20-2.37], P < .001) than in players who wore a generic mouth guard. The rate of SRC was also higher (HR = 1.96 [95% CI, 1.40-2.73], P < .001) in players who had sustained an SRC within the previous 12 months (15.1% of the 259 players [95% CI, 11.0%-20.1%]) than in players without a previous SRC (8.2% of the 2028 players [95% CI, 7.1%-9.5%]). Incidence of SRC was similar regardless of the helmet brand (manufacturer) worn by high school football players. Players who had sustained an SRC within the previous 12 months were more likely to sustain an SRC than were players without a history of SRC. Sports medicine providers who work with high school football players need to realize that factors other than the type of protective equipment worn affect the risk of SRC in high school players. © 2014 The Author(s).

A strategy to seal exploratory boreholes in unsaturated tuff; Yucca Mountain Site Characterization Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandez, J.A.; Case, J.B.; Givens, C.A.

1994-04-01

This report presents a strategy for sealing exploratory boreholes associated with the Yucca Mountain Site Characterization Project. Over 500 existing and proposed boreholes have been considered in the development of this strategy, ranging from shallow (penetrating into alluvium only) to deep (penetrating into the groundwater table). Among the comprehensive list of recommendations are the following: Those boreholes within the potential repository boundary and penetrating through the potential repository horizon are the most significant boreholes from a performance standpoint and should be sealed. Shallow boreholes are comparatively insignificant and require only nominal sealing. The primary areas in which to place sealsmore » are away from high-temperature zones at a distance from the potential repository horizon in the Paintbrush nonwelded tuff and the upper portion of the Topopah Spring Member and in the tuffaceous beds of the Calico Hills Unit. Seals should be placed prior to waste emplacement. Performance goals for borehole seals both above and below the potential repository are proposed. Detailed construction information on the boreholes that could be used for future design specifications is provided along with a description of the environmental setting, i.e., the geology, hydrology, and the in situ and thermal stress states. A borehole classification scheme based on the condition of the borehole wall in different tuffaceous units is also proposed. In addition, calculations are presented to assess the significance of the boreholes acting as preferential pathways for the release of radionuclides. Design calculations are presented to answer the concerns of when, where, and how to seal. As part of the strategy development, available technologies to seal exploratory boreholes (including casing removal, borehole wall reconditioning, and seal emplacement) are reviewed.« less

Vancouver Transcatheter Aortic Valve Replacement Clinical Pathway: Minimalist Approach, Standardized Care, and Discharge Criteria to Reduce Length of Stay.

PubMed

Lauck, Sandra B; Wood, David A; Baumbusch, Jennifer; Kwon, Jae-Yung; Stub, Dion; Achtem, Leslie; Blanke, Philipp; Boone, Robert H; Cheung, Anson; Dvir, Danny; Gibson, Jennifer A; Lee, Bobby; Leipsic, Jonathan; Moss, Robert; Perlman, Gidon; Polderman, Jopie; Ramanathan, Krishnan; Ye, Jian; Webb, John G

2016-05-01

We describe the development, implementation, and evaluation of a standardized clinical pathway to facilitate safe discharge home at the earliest time after transfemoral transcatheter aortic valve replacement. Between May 2012 and October 2014, the Heart Team developed a clinical pathway suited to the unique requirements of transfemoral transcatheter aortic valve replacement in contemporary practice. The components included risk-stratified minimalist periprocedure approach, standardized postprocedure care with early mobilization and reconditioning, and criteria-driven discharge home. Our aim was to reduce variation in care, identify a subgroup of patients suitable for early discharge (≤48 hours), and decrease length of stay for all patients. We addressed barriers related to historical practices, complex multidisciplinary stakeholder engagement, and adoption of length of stay as a quality indicator. We retrospectively reviewed the experiences of 393 consecutive patients; 150 (38.2%) were discharged early. At baseline, early discharge patients had experienced less previous balloon aortic valvuloplasty, had higher left ventricular ejection fraction, better cognitive function, and were less frail than the standard discharge group (>48 hours). Early discharge was associated with the use of local anesthesia, implantation of balloon expandable device, avoidance of urinary catheter, and early removal of temporary pacemaker. Median length of stay was 1 day for early discharge and 3 days for other patients; 97.7% were discharged home. There were no differences in 30-day mortality (1.3%), disabling stroke (0.8%), or readmission (10.7%). The implementation of a transcatheter aortic valve replacement clinical pathway shifted the program's approach to combine standardized processes and individual risk stratification. The Vancouver transcatheter aortic valve replacement clinical pathway requires a rigorous assessment to determine its efficacy, safety, and reproducibility. © 2016 American Heart Association, Inc.

Effects of resistance-guided high intensity interval functional electrical stimulation cycling on an individual with paraplegia: A case report.

PubMed

Dolbow, David R; Credeur, Daniel P

2018-03-01

Individuals with spinal cord injury (SCI) are more than twice as likely to develop and die from cardio-metabolic diseases as compared to able-bodied. This increased risk is thought to be in part due to accelerated muscle atrophy and reduced blood flow through sublesional arteries. Thus, strategies to recondition paralyzed skeletal muscles may help reduce cardio-metabolic disease risk. The purpose of this case report was to examine the impact of a novel, resistance-guided, high intensity interval training functional electrical stimulation (RG-HIIT-FES) cycling program on cardio-metabolic health in people with chronic SCI. One adult female with chronic T10 SCI. A novel RG-HIIT-FES cycling program three times per week for 10 weeks. Measures of body composition and cardio-metabolic health (vascular endothelial function of the brachial artery via flow-mediated dilation) and HbA1c blood values were performed at baseline and following completion of the RG-HIIT-FES program. Total body lean mass and legs lean mass increased 2.8% and 5.3% respectively while vastus lateralis thickness increased by 59.5%. Reactive hyperemia and flow mediated dilation change in brachial artery diameter increased by 11.1% and 147.7% following the program, respectively. HbA1c level changed minimally (5 to 4.9%). This case report suggests that RG-HIIT-FES cycling was an effective strategy to improve lean mass, and systemic vascular endothelial health in an individual with chronic SCI.

High-Performance Wireless Telemetry

NASA Technical Reports Server (NTRS)

Griebeler, Elmer; Nawash, Nuha; Buckley, James

2011-01-01

Prior technology for machinery data acquisition used slip rings, FM radio communication, or non-real-time digital communication. Slip rings are often noisy, require much space that may not be available, and require access to the shaft, which may not be possible. FM radio is not accurate or stable, and is limited in the number of channels, often with channel crosstalk, and intermittent as the shaft rotates. Non-real-time digital communication is very popular, but complex, with long development time, and objections from users who need continuous waveforms from many channels. This innovation extends the amount of information conveyed from a rotating machine to a data acquisition system while keeping the development time short and keeping the rotating electronics simple, compact, stable, and rugged. The data are all real time. The product of the number of channels, times the bit resolution, times the update rate, gives a data rate higher than available by older methods. The telemetry system consists of a data-receiving rack that supplies magnetically coupled power to a rotating instrument amplifier ring in the machine being monitored. The ring digitizes the data and magnetically couples the data back to the rack, where it is made available. The transformer is generally a ring positioned around the axis of rotation with one side of the transformer free to rotate and the other side held stationary. The windings are laid in the ring; this gives the data immunity to any rotation that may occur. A medium-frequency sine-wave power source in a rack supplies power through a cable to a rotating ring transformer that passes the power on to a rotating set of electronics. The electronics power a set of up to 40 sensors and provides instrument amplifiers for the sensors. The outputs from the amplifiers are filtered and multiplexed into a serial ADC. The output from the ADC is connected to another rotating ring transformer that conveys the serial data from the rotating section to the stationary section. From there, a cable conveys the serial data to the remote rack, where it is reconditioned to logic level specifications, de-serialized, and converted back to analog. In the rotating electronics are code generators to indicate the beginning of files for data synchronization.

Disability prevention and communication among workers, physicians, employers, and insurers--current models and opportunities for improvement.

PubMed

Pransky, Glenn; Shaw, William; Franche, Renee-Louise; Clarke, Andrew

2004-06-03

To review prevailing models of disability management and prevention with respect to communication, and to suggest alternative approaches. Review of selected articles. Effective disability management and return to work strategies have been the focus of an increasing number of intervention programmes and associated research studies, spanning a variety of worker populations and provider and business perspectives. Although primary and secondary disability prevention approaches have addressed theoretical basis, methods and costs, few identify communication as a key factor influencing disability outcomes. Four prevailing models of disability management and prevention (medical model, physical rehabilitation model, job-match model, and managed care model) are identified. The medical model emphasizes the physician's role to define functional limitations and job restrictions. In the physical rehabilitation model, rehabilitation professionals communicate the importance of exercise and muscle reconditioning for resuming normal work activities. The job-match model relies on the ability of employers to accurately communicate physical job requirements. The managed care model focuses on dissemination of acceptable standards for medical treatment and duration of work absence, and interventions by case managers when these standards are exceeded. Despite contrary evidence for many health impairments, these models share a common assumption that medical disability outcomes are highly predictable and unaffected by either individual or contextual factors. As a result, communication is often authoritative and unidirectional, with workers and employers in a passive role. Improvements in communication may be responsible for successes across a variety of new interventions. Communication-based interventions may further improve disability outcomes, reduce adversarial relationships, and prove cost-effective; however, controlled trials are needed.

Operational and Research Musculoskeletal Summit: Summit Recommendations

NASA Technical Reports Server (NTRS)

Scheuring, Richard A.; Walton, Marlei; Davis-Street, Janis; Smaka, Todd J.; Griffin, DeVon

2006-01-01

The Medical Informatics and Health Care Systems group in the Office of Space Medicine at NASA Johnson Space Center (JSC) has been tasked by NASA with improving overall medical care on the International Space Station (ISS) and providing insights for medical care for future exploration missions. To accomplish this task, a three day Operational and Research Musculoskeletal Summit was held on August 23-25th, 2005 at Space Center Houston. The purpose of the summit was to review NASA#s a) current strategy for preflight health maintenance and injury screening, b) current treatment methods in-flight, and c) risk mitigation strategy for musculoskeletal injuries or syndromes that could occur or impact the mission. Additionally, summit participants provided a list of research topics NASA should consider to mitigate risks to astronaut health. Prior to the summit, participants participated in a web-based pre-summit forum to review the NASA Space Medical Conditions List (SMCL) of musculoskeletal conditions that may occur on ISS as well as the resources currently available to treat them. Data from the participants were compiled and integrated with the summit proceedings. Summit participants included experts from the extramural physician and researcher communities, and representatives from NASA Headquarters, the astronaut corps, JSC Medical Operations and Human Adaptations and Countermeasures Offices, Glenn Research Center Human Research Office, and the Astronaut Strength, Conditioning, and Reconditioning (ASCR) group. The recommendations in this document are based on a summary of summit discussions and the best possible evidence-based recommendations for musculoskeletal care for astronauts while on the ISS, and include recommendati ons for exploration class missions.

A semi-automated tool for reducing the creation of false closed depressions from a filled LIDAR-derived digital elevation model

USGS Publications Warehouse

Waller, John S.; Doctor, Daniel H.; Terziotti, Silvia

2015-01-01

Closed depressions on the land surface can be identified by ‘filling’ a digital elevation model (DEM) and subtracting the filled model from the original DEM. However, automated methods suffer from artificial ‘dams’ where surface streams cross under bridges and through culverts. Removal of these false depressions from an elevation model is difficult due to the lack of bridge and culvert inventories; thus, another method is needed to breach these artificial dams. Here, we present a semi-automated workflow and toolbox to remove falsely detected closed depressions created by artificial dams in a DEM. The approach finds the intersections between transportation routes (e.g., roads) and streams, and then lowers the elevation surface across the roads to stream level allowing flow to be routed under the road. Once the surface is corrected to match the approximate location of the National Hydrologic Dataset stream lines, the procedure is repeated with sequentially smaller flow accumulation thresholds in order to generate stream lines with less contributing area within the watershed. Through multiple iterations, artificial depressions that may arise due to ephemeral flow paths can also be removed. Preliminary results reveal that this new technique provides significant improvements for flow routing across a DEM and minimizes artifacts within the elevation surface. Slight changes in the stream flow lines generally improve the quality of flow routes; however some artificial dams may persist. Problematic areas include extensive road ditches, particularly along divided highways, and where surface flow crosses beneath road intersections. Limitations do exist, and the results partially depend on the quality of data being input. Of 166 manually identified culverts from a previous study by Doctor and Young in 2013, 125 are within 25 m of culverts identified by this tool. After three iterations, 1,735 culverts were identified and cataloged. The result is a reconditioned elevation dataset, which retains the karst topography for further analysis, and a culvert catalog.

Evaluation Program for Secondary Spacecraft Cells: Synchronous Orbit Testing of Sealed Nickel Cadmium Cells

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1977-01-01

Performance data concerning sealed nickel-cadmium cells operating under a synchronous orbit regime are presented. A space satellite maintaining a position over a fixed point on earth as the earth rotates on its axis and revolves about the sun was simulated. Results include: (1) exposure to synchronous orbit testing at a temperature of 40 C yields less than 6 years of life; (2) performance at -20 C presents a low capacity problem; (3) the capacity check, performed at the middle of each show period, provides a temporary red reconditioning effect on the cells in that the end-of-discharge voltages are higher, for approximately 7 to 10 days, following the capacity check than they were 7 to 10 days prior to the capacity check; (4) all the test packs at -20 C and 40 C have either failed or were discontinued because of low capacity; and (5) test packs at temperatures of 0 C and 10 C have delivered the best capacity during life and packs tested at 20 C showed better life capability than packs tested at -20 C and 40 C.

Solvent-programmed microchip open-channel electrochromatography.

PubMed

Kutter, J P; Jacobson, S C; Matsubara, N; Ramsey, J M

1998-08-01

Open-channel electrochromatography in combination with solvent programming is demonstrated using a microchip device. Channel walls were coated with octadecylsilanes at ambient temperatures, yielding stationary phases for chromatographic separations of neutral dyes. The electroosmotic flow after coating was sufficient to ensure transport of all species and on-chip mixing of isocratic and gradient elution conditions with acetonitrile-buffer mixtures. Chips having different channel depths between 10.2 and 2.9 μm were evaluated for performance, and van Deemter plots were established. Channel depths of about 5 μm were found to be a good compromise between efficiency and ease of operation. Isocratic and gradient elution conditions were easily established and manipulated by computer-controlled application of voltages to the terminals of the microchip. Linear gradients with different slopes, start times, duration times, and start percentages of organic modifier proved to be powerful tools to tune selectivity and analysis time for the separation of a test mixture. Even very steep gradients still produced excellent efficiencies. Together with fast reconditioning times, complete runs could be finished in under 60 s.

Earth and Moon as viewed by Mariner 10

NASA Technical Reports Server (NTRS)

1973-01-01

Mariner 10 was launched on November 3, 1973, 12:45 am PST, from Cape Canaveral on an Atlas/Centaur rocket (a reconditioned Intercontinental Ballistic Missile - ICBM). Within 12 hours of launch the twin cameras were turned on and several hundred pictures of both the Earth and the Moon were acquired over the following days.

The Earth and Moon were imaged by Mariner 10 from 2.6 million km while completing the first ever Earth-Moon encounter by a spacecraft capable of returning high resolution digital color image data. These images have been combined at right to illustrate the relative sizes of the two bodies. From this particular viewpoint the Earth appears to be a water planet!

The Mariner 10 mission is managed by the Jet Propulsion Laboratory for NASA's Office of Space Science, explored Venus in February 1974 on the way to three encounters with Mercury-in March and September 1974 and in March 1975. The spacecraft took more than 7,000 photos of Mercury, Venus, the Earth and the Moon.

Image Credit: NASA/JPL/Northwestern University

Extension lifetime for dye-sensitized solar cells through multiple dye adsorption/desorption process

NASA Astrophysics Data System (ADS)

Chiang, Yi-Fang; Chen, Ruei-Tang; Shen, Po-Shen; Chen, Peter; Guo, Tzung-Fang

2013-03-01

In this study, we propose a novel concept of extending the lifetime of dye-sensitized solar cells (DSCs) and reducing the costs of re-conditioning DSCs by recycling the FTO/TiO2 substrates. The photovoltaic performances of DSCs using substrates with various cycles of dye uptake and rinse off history are tested. The results show that dye adsorption and Voc are significantly increased under multiple dye adsorption/desorption process and resulted in the improvement of power conversion efficiency. Moreover, the dyeing kinetics is faster after multiple recycling processes, which is favorable for the industrial application. With surface analysis and charge transport characteristics, we also demonstrate the optimal functionality of TiO2/dye interface for the improved Voc and efficiency. The results confirm that the improved performances are due to increased dye loading and dense packing of dye molecules. Our results are beneficial for the understanding on the extension of DSCs lifetime after long-term operation in the application of DSC modules. This approach may also be applied in the replacement of newly synthesized photosensitizes to the active cells.

Uncertainty-Dependent Extinction of Fear Memory in an Amygdala-mPFC Neural Circuit Model

PubMed Central

Li, Yuzhe; Nakae, Ken; Ishii, Shin; Naoki, Honda

2016-01-01

Uncertainty of fear conditioning is crucial for the acquisition and extinction of fear memory. Fear memory acquired through partial pairings of a conditioned stimulus (CS) and an unconditioned stimulus (US) is more resistant to extinction than that acquired through full pairings; this effect is known as the partial reinforcement extinction effect (PREE). Although the PREE has been explained by psychological theories, the neural mechanisms underlying the PREE remain largely unclear. Here, we developed a neural circuit model based on three distinct types of neurons (fear, persistent and extinction neurons) in the amygdala and medial prefrontal cortex (mPFC). In the model, the fear, persistent and extinction neurons encode predictions of net severity, of unconditioned stimulus (US) intensity, and of net safety, respectively. Our simulation successfully reproduces the PREE. We revealed that unpredictability of the US during extinction was represented by the combined responses of the three types of neurons, which are critical for the PREE. In addition, we extended the model to include amygdala subregions and the mPFC to address a recent finding that the ventral mPFC (vmPFC) is required for consolidating extinction memory but not for memory retrieval. Furthermore, model simulations led us to propose a novel procedure to enhance extinction learning through re-conditioning with a stronger US; strengthened fear memory up-regulates the extinction neuron, which, in turn, further inhibits the fear neuron during re-extinction. Thus, our models increased the understanding of the functional roles of the amygdala and vmPFC in the processing of uncertainty in fear conditioning and extinction. PMID:27617747

Uncertainty-Dependent Extinction of Fear Memory in an Amygdala-mPFC Neural Circuit Model.

PubMed

Li, Yuzhe; Nakae, Ken; Ishii, Shin; Naoki, Honda

2016-09-01

Uncertainty of fear conditioning is crucial for the acquisition and extinction of fear memory. Fear memory acquired through partial pairings of a conditioned stimulus (CS) and an unconditioned stimulus (US) is more resistant to extinction than that acquired through full pairings; this effect is known as the partial reinforcement extinction effect (PREE). Although the PREE has been explained by psychological theories, the neural mechanisms underlying the PREE remain largely unclear. Here, we developed a neural circuit model based on three distinct types of neurons (fear, persistent and extinction neurons) in the amygdala and medial prefrontal cortex (mPFC). In the model, the fear, persistent and extinction neurons encode predictions of net severity, of unconditioned stimulus (US) intensity, and of net safety, respectively. Our simulation successfully reproduces the PREE. We revealed that unpredictability of the US during extinction was represented by the combined responses of the three types of neurons, which are critical for the PREE. In addition, we extended the model to include amygdala subregions and the mPFC to address a recent finding that the ventral mPFC (vmPFC) is required for consolidating extinction memory but not for memory retrieval. Furthermore, model simulations led us to propose a novel procedure to enhance extinction learning through re-conditioning with a stronger US; strengthened fear memory up-regulates the extinction neuron, which, in turn, further inhibits the fear neuron during re-extinction. Thus, our models increased the understanding of the functional roles of the amygdala and vmPFC in the processing of uncertainty in fear conditioning and extinction.

A standardized model of brain death, donor treatment, and lung transplantation for studies on organ preservation and reconditioning.

PubMed

Valenza, Franco; Coppola, Silvia; Froio, Sara; Ruggeri, Giulia Maria; Fumagalli, Jacopo; Villa, Alessandro Maria; Rosso, Lorenzo; Mendogni, Paolo; Conte, Grazia; Lonati, Caterina; Carlin, Andrea; Leonardi, Patrizia; Gatti, Stefano; Stocchetti, Nino; Gattinoni, Luciano

2014-12-01

We set a model of brain death, donor management, and lung transplantation for studies on lung preservation and reconditioning before transplantation. Ten pigs (39.7 ± 5.9 Kg) were investigated. Five animals underwent brain death and were treated as organ donors; the lungs were then procured and cold stored (Ischemia). Five recipients underwent left lung transplantation and post-reperfusion follow-up (Graft). Cardiorespiratory and metabolic parameters were collected. Lung gene expression of cytokines (tumor necrosis factor alpha (TNFα), interleukin-1 beta (IL-1β), interleukin-6 (IL-6), interferon gamma (IFNγ), high mobility group box-1 (HMGB-1)), chemokines (chemokine CC motif ligand-2 (CCL2-MCP-1), chemokine CXC motif ligand-10 (CXCL-10), interleukin-8 (IL-8)), and endothelial activation markers (endothelin-1 (EDN-1), intercellular adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (VCAM-1), selectin-E (SELE)) was assessed by real-time polymerase chain reaction (PCR). Tachycardia and hypertension occurred during brain death induction; cardiac output rose, systemic vascular resistance dropped (P < 0.05), and diabetes insipidus occurred. Lung-protective ventilation strategy was applied: 9 h after brain death induction, PaO2 was 192 ± 12 mmHg at positive end-expiratory pressure (PEEP) 8.0 ± 1.8 cmH2O and FiO2 of 40%; wet-to-dry ratio (W/D) was 5.8 ± 0.5, and extravascular lung water (EVLW) was 359 ± 80 mL. Procured lungs were cold-stored for 471 ± 24 min (Ischemia) at the end of which W/D was 6.1 ± 0.9. Left lungs were transplanted and reperfused (warm ischemia 98 ± 14 min). Six hours after controlled reperfusion, PaO2 was 192 ± 23 mmHg (PEEP 8.7 ± 1.5 cmH2O, FiO2 40%), W/D was 5.6 ± 0.4, and EVLW was 366 ± 117 mL. Levels of IL-8 rose at the end of donor management (BD, P < 0.05); CCL2-MCP-1, IL-8, HMGB-1, and SELE were significantly altered after reperfusion (Graft, P < 0.05). We have set a standardized, reproducible pig model resembling the entire process of organ donation that may be used as a platform to test in vivo and ex vivo strategies of donor lung optimization before transplantation.

Experimental ex vivo lung perfusion with sevoflurane: effects on damaged donor lung grafts.

PubMed

Wang, Xingyu; Parapanov, Roumen; Francioli, Cyril; Perentes, Jean Yannis; Letovanec, Igor; Gonzalez, Michel; Kern, Christian; Ris, Hans-Beat; Piquilloud, Lise; Marcucci, Carlo; Krueger, Thorsten; Liaudet, Lucas; Gronchi, Fabrizio

2018-06-01

Volatile anaesthetics can provide significant protection against reperfusion injury in various experimental settings. The aim of this study was to assess the potential of sevoflurane treatment, the most commonly used volatile anaesthetic in modern anaesthesia, in rat lungs donated after circulatory death and reconditioned in an ex vivo lung perfusion (EVLP) system. Fifteen rats were sacrificed and divided into 3 groups. In the control and sevoflurane groups, the heart-lung blocks were exposed to 1 h of warm ischaemia and 2 h of cold ischaemia and were mounted on an EVLP circuit for 3 h, in the absence or in the presence of 2% sevoflurane. In the baseline group, heart-lung blocks were harvested immediately after euthanasia. Physiological data, lung nitro-oxidative stress, lactate dehydrogenase (LDH), expression of cytokines, oedema and histopathological findings were assessed during or post-EVLP. The sevoflurane group showed significantly reduced LDH (8.82 ± 3.58 arbitrary unit vs 3.80 ± 3.02 arbitrary unit, P = 0.03), protein carbonyl (1.17 ± 0.44 nmol⋅mg-1 vs 0.55 ± 0.11 nmol⋅mg-1, P = 0.006), 3-nitrotyrosine (197.44 ± 18.47 pg⋅mg-1 vs 151.05 ± 23.54 pg⋅mg-1, P = 0.004), cytokine-induced neutrophil chemoattractant factor 1 (1.17 ± 0.32 ng⋅mg-1 vs 0.66 ± 0.28 ng⋅mg-1, P = 0.03) and tumour necrosis factor alpha (1.50 ± 0.59 vs 0.59 ± 0.38 ng⋅mg-1, P = 0.02) when compared with the control group. In addition, sevoflurane lungs gained significantly less weight (0.72 ± 0.09 g vs 0.72 ± 0.09 g, P = 0.044), had less perivascular oedema (0.58 ± 0.09 vs 0.47 ± 0.07, P = 0.036), and improved static pulmonary compliance (+0.215 ml⋅cmH2O-1, P = 0.003) and peak airways pressure (-1.33 cmH2O, P = 0.04) but similar oxygenation capacity (+1.61 mmHg, P = 0.77) and pulmonary vascular resistances (+0.078 mmHg⋅min⋅ml-1, P = 0.15) when compared with the control group. These findings suggest that the potential of sevoflurane in protecting the lungs donated after cardiac death and reconditioned using EVLP could improve the outcome of these lungs following subsequent transplantation.

Overview of the Exploration Exercise Device Validation Study Plans

NASA Technical Reports Server (NTRS)

DeWitt, J. K.; Swan, B. G.

2018-01-01

The NASA has determined that a multi-functional exercise device will be developed for use as an exercise device during exploration missions. The device will allow for full body resistance and metabolic exercise necessary to minimize physiological losses during space flight and to maintain fitness necessary to perform critical mission tasks. Prior to implementation as an exercise device on an Exploration vehicle, there will be verification and validation testing completed to determine device efficacy at providing the necessary training stimuli to achieve desired goals. Because the exploration device will be new device that has yet be specified, specific Verification and Validation (V&V) protocols have yet to be developed. Upon delivery of an exploration exercise device training unit, stakeholders throughout NASA will develop V&V plans that include ground-based testing and testing on the International Space Station (ISS). Stakeholders will develop test protocols that include success criterion for the device. Ground tests will occur at NASA Johnson Space Station prior to flight testing. The intents of the ground tests are to allow crew, spaceflight medicine, science, engineering, Astronaut Strength, Conditioning, and Reconditioning staff, and others to gain experience in the best utilization of the device. The goal is to obtain an evidence base for recommending use of the device on the ISS. The developed protocol will be created to achieve multiple objectives, including determining if the device provides an adequate training stimulus for 5th - 95th percentile males and females, allows for exercise modalities that protect functional capability, and is robust and can withstand extensive human use. Although protocols are yet to be determined, current expectations include use of the device by test subjects and current crew in order to obtain quantitative and qualitative feedback. Information obtained during the ground tests may be used to influence device modifications during design iterations. Assuming successful ground tests, the device will be installed on the ISS for testing during space flight. Spaceflight testing is envisioned to include an activation and checkout (ACO) phase and a V&V phase. During the ACO phase, 1-2 crewmembers will exercise with the device to ensure proper function. ACO is expected to last multiple months because of the many modes and methods of exercise that need to be assessed. However, the goal is to complete the ACO as quickly as possible. Once successful ACO occurs, the crew will be free to use the device for normal exercise pending concurrence from stakeholders. V&V tests on the ISS will ideally consist of crew using the device for all of their exercise for an entire mission. Exercise prescriptions will be supplied that replicate expected prescriptions during exploration missions. Crew that are not enrolled in the V&V studies would be also free to use the device as their schedule permits. As experience is gained by users, exercise protocols could change. The intent of all V&V testing is to ensure that all have thorough understanding of experience at optimizing device capability

Sustaining a "culture of silence" in the neonatal intensive care unit during nonemergency situations: a grounded theory on ensuring adherence to behavioral modification to reduce noise levels.

PubMed

Swathi, S; Ramesh, A; Nagapoornima, M; Fernandes, Lavina M; Jisina, C; Rao, P N Suman; Swarnarekha, A

2014-01-01

The aim of this study was to generate a substantive theory explaining how the staff in a resource-limited neonatal intensive care unit (NICU) of a developing nation manage to ensure adherence to behavioral modification components of a noise reduction protocol (NsRP) during nonemergency situations. The study was conducted after implementation of an NsRP in a level III NICU of south India. The normal routine of the NICU is highly dynamic because of various categories of staff conducting clinical rounds followed by care-giving activities. This is unpredictably interspersed with very noisy emergency management of neonates who suddenly fall sick. In-depth interviews were conducted with 36 staff members of the NICU (20 staff nurses, six nursing aides, and 10 physicians). Group discussions were conducted with 20 staff nurses and six nursing aides. Data analysis was done in line with the reformulated grounded theory approach, which was based on inductive examination of textual information. The results of the analysis showed that the main concern was to ensure adherence to behavioral modification components of the NsRP. This was addressed by using strategies to "sustain a culture of silence in NICU during nonemergency situations" (core category). The main strategies employed were building awareness momentum, causing awareness percolation, developing a sense of ownership, expansion of caring practices, evolution of adherence, and displaying performance indicators. The "culture of silence" reconditions the existing staff and conditions new staff members joining the NICU. During emergency situations, a "noisy culture" prevailed because of pragmatic neglect of behavioral modification when life support overrode all other concerns. In addition to this, the process of operant conditioning should be formally conducted once every 18 months. The results of this study may be adapted to create similar strategies and establish context specific NsRPs in NICUs with resource constraints.

Temperature and oxygenation during organ preservation: friends or foes?

PubMed

Gilbo, Nicholas; Monbaliu, Diethard

2017-06-01

The liberalization of donor selection criteria in organ transplantation, with the increased use of suboptimal grafts, has stimulated interest in ischemia-reperfusion injury prevention and graft reconditioning. Organ preservation technologies are changing considerably, mostly through the reintroduction of dynamic machine preservation. Here, we review the current evidence on the role of temperature and oxygenation during dynamic machine preservation. A large but complex body of evidence exists and comparative studies are few. Oxygenation seems to support an advantageous effect in hypothermic machine preservation and is mandatory in normothermic machine preservation, although in the latter, supraphysiological oxygen tensions should be avoided. High-risk grafts, such as suboptimal organs, may optimally benefit from oxygenated perfusion conditions that support metabolism and activate mechanisms of repair such as subnormothermic machine preservation, controlled oxygenated rewarming, and normothermic machine preservation. For lower risk grafts, oxygenation during hypothermic machine preservation may sufficiently reduce injuries and recharge the cellular energy to secure functional recovery after transplantation. The relationship between temperature and oxygenation in organ preservation is more complex than physiological laws would suggest. Rather than one default perfusion temperature/oxygenation standard, perfusion protocols should be tailored for specific needs of grafts of different quality.

Stephanoprora chasanensis n. sp. (Digenea: Echinochasmidae): Morphology, life cycle, and molecular data.

PubMed

Besprozvannykh, Vladimir V; Rozhkovan, Konstantin V; Ermolenko, Alexey V

2017-02-01

Echinostomatoidea is a large, globally distributed and heterogeneous group of hermaphroditic digeneans that parasite, as adults, vertebrate hosts of all classes. Species of this group have received attention from researchers as they can cause diseases in wildlife and humans. Here we describe the biological and molecular phylogenetic characteristics of Stephanoprora chasanensis n. sp. (Digenea: Echinochasmidae). The life cycle of this fluke was experimentally completed by the use of hosts, i.e. Stenothyra recondite Lindholm, 1929 snail (the 1st intermediate), Rhynchocypris percnurus mantschuricus (Berg, 1907) freshwater fish (the 2nd intermediate) and Gallus gallus chicken (the definitive host). In the adult worms, vitelline follicles were distributed anteriorly to the mid-level of the ventral sucker in our specimens whereas they did not reach the level of anterior testis in other species of Stephanoprora previously reported. Phylogenetic analysis based on 28S rDNA revealed that Stephanoprora and Echinochasmus with 20-22 collar spines grouped together in a single cluster. In addition, we showed that Stephanoprora chasanensis n. sp. was closely related to Echinochasmus milvi Yamaguti, 1939. Cercariae of these two echinostomes commonly have a long tail. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Phenotypic transformation affects associative learning in the desert locust.

PubMed

Simões, Patrício M V; Niven, Jeremy E; Ott, Swidbert R

2013-12-02

In desert locusts, increased population densities drive phenotypic transformation from the solitarious to the gregarious phase within a generation [1-4]. Here we show that when presented with odor-food associations, the two extreme phases differ in aversive but not appetitive associative learning, with solitarious locusts showing a conditioned aversion more quickly than gregarious locusts. The acquisition of new learned aversions was blocked entirely in acutely crowded solitarious (transiens) locusts, whereas appetitive learning and prior learned associations were unaffected. These differences in aversive learning support phase-specific feeding strategies. Associative training with hyoscyamine, a plant alkaloid found in the locusts' habitat [5, 6], elicits a phase-dependent odor preference: solitarious locusts avoid an odor associated with hyoscyamine, whereas gregarious locusts do not. Remarkably, when solitarious locusts are crowded and then reconditioned with the odor-hyoscyamine pairing as transiens, the specific blockade of aversive acquisition enables them to override their prior aversive memory with an appetitive one. Under fierce food competition, as occurs during crowding in the field, this provides a neuroecological mechanism enabling locusts to reassign an appetitive value to an odor that they learned previously to avoid. Copyright © 2013 Elsevier Ltd. All rights reserved.

Possible disruption of remote viewing by complex weak magnetic fields around the stimulus site and the possibility of accessing real phase space: a pilot study.

PubMed

Koren, S A; Persinger, M A

2002-12-01

In 2002 Persinger, Roll, Tiller, Koren, and Cook considered whether there are physical processes by which recondite information exists within the space and time of objects or events. The stimuli that compose this information might be directly detected within the whole brain without being processed by the typical sensory modalities. We tested the artist Ingo Swann who can reliably draw and describe randomly selected photographs sealed in envelopes in another room. In the present experiment the photographs were immersed continuously in repeated presentations (5 times per sec.) of one of two types of computer-generated complex magnetic field patterns whose intensities were less than 20 nT over most of the area. WINDOWS-generated but not DOS-generated patterns were associated with a marked decrease in Mr. Swann's accuracy. Whereas the DOS software generated exactly the same pattern, WINDOWS software phase-modulated the actual wave form resulting in an infinite bandwidth and complexity. We suggest that information obtained by processes attributed to "paranormal" phenomena have physical correlates that can be masked by weak, infinitely variable magnetic fields.

Effects of biofeedback on obstructive defecation--reconditioning of the defecation reflex?

PubMed Central

Papachrysostomou, M; Smith, A N

1994-01-01

Twenty two patients with obstructive defecation were recruited for relaxation training by domiciliary self regulatory biofeedback. Each patient served as his or her own control for anorectal and proctographic assessments. Biofeedback training improved the obstructive symptoms of the patients and showed significant change in various parameters related to the obstructive defecation syndrome. As examined by isotope dynamic proctography: the defecation rate (% of evacuation/defecation time) was significantly increased (p < 0.05), the anorectal angles at rest and during attempted defecation were made more obtuse (p < 0.05), and the pelvic floor movements were made more dynamic on voluntary contraction of the anal sphincter (p < 0.03). The external anal sphincter electromyographic voltage recorded during defecation was significantly reduced (p < 0.0005) as was the surface anal plug electromyographic electrode voltage (p < 0.0001), which was associated with a greatly reduced anismus index (p < 0.0001). The rectal sensation was improved (p < 0.05), concomitantly. Biofeedback thus improves the defecation act in patients suffering from inappropriate contraction of the pelvic floor and sphincter musculature. Furthermore, this study has shown that biofeedback objectively influences the defecation reflex leading to an improved quality of higher control of bowel function. PMID:8307478

Electro-osmotic infusion for joule heating soil remediation techniques

DOEpatents

Carrigan, Charles R.; Nitao, John J.

1999-01-01

Electro-osmotic infusion of ground water or chemically tailored electrolyte is used to enhance, maintain, or recondition electrical conductivity for the joule heating remediation technique. Induced flows can be used to infuse electrolyte with enhanced ionic conductivity into the vicinity of the electrodes, maintain the local saturation of near-electrode regions and resaturate a partially dried out zone with groundwater. Electro-osmotic infusion can also tailor the conductivity throughout the target layer by infusing chemically modified and/or heated electrolyte to improve conductivity contrast of the interior. Periodic polarity reversals will prevent large pH changes at the electrodes. Electro-osmotic infusion can be used to condition the electrical conductivity of the soil, particularly low permeability soil, before and during the heating operation. Electro-osmotic infusion is carried out by locating one or more electrodes adjacent the heating electrodes and applying a dc potential between two or more electrodes. Depending on the polarities of the electrodes, the induced flow will be toward the heating electrodes or away from the heating electrodes. In addition, electrodes carrying a dc potential may be located throughout the target area to tailor the conductivity of the target area.

Oropharyngeal dysphagia pathophysiology, complications and science-based interventions.

PubMed

Altman, Kenneth W

2012-01-01

The etiology of oropharyngeal dysphagia can be broad, and includes aging with atrophy, debilitation, stroke, neurodegenerative and muscular diseases, tumor and postsurgical deformity, as well as effects due to medications and drying of the mucosal membranes. Pathophysiology depends on the multiple causative factors, including the cortex and neural connections to generate the swallow, as well as the oropharyngeal musculature. While chronic debilitation and age may result in nutritional deficiency and poor hydration, the other causes generally present with aspiration risk more acutely. Bacteriologically, aspiration pneumonia is usually polymicrobial with a predominance of Gram-negative enteric bacilli. However, there is emerging evidence to suggest that odontogenic sources may complicate the severity of bacterial load. The principles behind science-based interventions are primarily aspiration assessment with bedside evaluation, and ultimately modified barium swallow (videofluoroscopy) or functional endoscopic evaluation of swallowing (with or without sensory testing). Each has its advantages and logistical concerns. Intervention and rehabilitation is unique to the patient's needs, but may include reconditioning and therapy with a speech and language pathologist, and surgical options. The emerging roles of neuroplasticity and external neuromuscular stimulation are also discussed. Copyright © 2012 S. Karger AG, Basel.

TaOPR2 encodes a 12-oxo-phytodienoic acid reductase involved in the biosynthesis of jasmonic acid in wheat (Triticum aestivum L.).

PubMed

Wang, Yukun; Yuan, Guoliang; Yuan, Shaohua; Duan, Wenjing; Wang, Peng; Bai, Jianfang; Zhang, Fengting; Gao, Shiqing; Zhang, Liping; Zhao, Changping

2016-01-29

The 12-oxo-phytodienoic acid reductases (OPRs) are involved in the various processes of growth and development in plants, and classified into the OPRⅠ and OPRⅡ subgroups. In higher plants, only OPRⅡ subgroup genes take part in the biosynthesis of endogenous jasmonic acid. In this study, we isolated a novel OPRⅡ subgroup gene named TaOPR2 (GeneBank accession: KM216389) from the thermo-sensitive genic male sterile (TGMS) wheat cultivar BS366. TaOPR2 was predicted to encode a protein with 390 amino acids. The encoded protein contained the typical oxidored_FMN domain, the C-terminus peroxisomal-targeting signal peptide, and conserved FMN-binding sites. TaOPR2 was mapped to wheat chromosome 7B and located on peroxisome. Protein evolution analysis revealed that TaOPR2 belongs to the OPRⅡ subgroup and shares a high degree of identity with other higher plant OPR proteins. The quantitative real-time PCR results indicated that the expression of TaOPR2 is inhibited by abscisic acid (ABA), salicylic acid (SA), gibberellic acid (GA3), low temperatures and high salinity. In contrast, the expression of TaOPR2 can be induced by wounding, drought and methyl jasmonate (MeJA). Furthermore, the transcription level of TaOPR2 increased after infection with Puccinia striiformis f. sp. tritici and Puccinia recondite f. sp. tritici. TaOPR2 has NADPH-dependent oxidoreductase activity. In addition, the constitutive expression of TaOPR2 can rescue the male sterility phenotype of Arabidopsis mutant opr3. These results suggest that TaOPR2 is involved in the biosynthesis of jasmonic acid (JA) in wheat. Copyright © 2016 Elsevier Inc. All rights reserved.

Spacelab

NASA Image and Video Library

1994-07-01

Astronaut Chiaki Mukai conducts the Lower Body Negative Pressure (LBNP) experiment inside the International Microgravity Laboratory-2 (IML-2) mission science module. Dr. Chiaki Mukai is one of the National Space Development Agency of Japan (NASDA) astronauts chosen by NASA as a payload specialist (PS). She was the second NASDA PS who flew aboard the Space Shuttle, and was the first female astronaut in Asia. When humans go into space, the lack of gravity causes many changes in the body. One change is that fluids normally kept in the lower body by gravity shift upward to the head and chest. This is why astronauts' faces appear chubby or puffy. The change in fluid volume also affects the heart. The reduced fluid volume means that there is less blood to circulate through the body. Crewmembers may experience reduced blood flow to the brain when returning to Earth. This leads to fainting or near-fainting episodes. With the use of the LBNP to simulate the pull of gravity in conjunction with fluids, salt tablets can recondition the cardiovascular system. This treatment, called "soak," is effective up to 24 hours. The LBNP uses a three-layer collapsible cylinder that seals around the crewmember's waist which simulates the effects of gravity and helps pull fluids into the lower body. The data collected will be analyzed to determine physiological changes in the crewmembers and effectiveness of the treatment. The IML-2 was the second in a series of Spacelab flights designed by the international science community to conduct research in a microgravity environment Managed by the Marshall Space Flight Center, the IML-2 was launched on July 8, 1994 aboard the STS-65 Space Shuttle Orbiter Columbia mission.

STS-65 Onboard Photograph

NASA Technical Reports Server (NTRS)

1994-01-01

Astronaut Chiaki Mukai conducts the Lower Body Negative Pressure (LBNP) experiment inside the International Microgravity Laboratory-2 (IML-2) mission science module. Dr. Chiaki Mukai is one of the National Space Development Agency of Japan (NASDA) astronauts chosen by NASA as a payload specialist (PS). She was the second NASDA PS who flew aboard the Space Shuttle, and was the first female astronaut in Asia. When humans go into space, the lack of gravity causes many changes in the body. One change is that fluids normally kept in the lower body by gravity shift upward to the head and chest. This is why astronauts' faces appear chubby or puffy. The change in fluid volume also affects the heart. The reduced fluid volume means that there is less blood to circulate through the body. Crewmembers may experience reduced blood flow to the brain when returning to Earth. This leads to fainting or near-fainting episodes. With the use of the LBNP to simulate the pull of gravity in conjunction with fluids, salt tablets can recondition the cardiovascular system. This treatment, called 'soak,' is effective up to 24 hours. The LBNP uses a three-layer collapsible cylinder that seals around the crewmember's waist which simulates the effects of gravity and helps pull fluids into the lower body. The data collected will be analyzed to determine physiological changes in the crewmembers and effectiveness of the treatment. The IML-2 was the second in a series of Spacelab flights designed by the international science community to conduct research in a microgravity environment Managed by the Marshall Space Flight Center, the IML-2 was launched on July 8, 1994 aboard the STS-65 Space Shuttle Orbiter Columbia mission.

Self-Administration of Cocaine Induces Dopamine-Independent Self-Administration of Sigma Agonists

PubMed Central

Hiranita, Takato; Mereu, Maddalena; Soto, Paul L; Tanda, Gianluigi; Katz, Jonathan L

2013-01-01

Sigma1 receptors (σ1Rs) are intracellularly mobile chaperone proteins implicated in several disease processes, as well as psychiatric disorders and substance abuse. Here we report that although selective σ1R agonists (PRE-084, (+)-pentazocine) lacked reinforcing effects in drug-naive rats, over the course of 28 experimental sessions, which was more than sufficient for acquisition of cocaine self-administration, responding was not maintained by either σ1R agonist. In contrast, after subjects self-administered cocaine σ1R agonists were readily self-administered. The induced reinforcing effects were long lasting; a response for which subjects had no history of reinforcement was newly conditioned with both σ1R agonists, extinguished when injections were discontinued, and reconditioned when σ1R agonists again followed responses. Experience with food reinforcement was ineffective as an inducer of σ1R agonist reinforcement. Although a variety of dopamine receptor antagonists blocked cocaine self-administration, consistent with its dopaminergic mechanism, PRE-084 self-administration was entirely insensitive to these drugs. Conversely, the σR antagonist, BD1063, blocked PRE-084 self-administration but was inactive against cocaine. In microdialysis studies i.v. PRE-084 did not significantly stimulate dopamine at doses that were self-administered in rats either with or without a cocaine self-administration experience. The results indicate that cocaine experience induces reinforcing effects of previously inactive σ1R agonists, and that the mechanism underlying these reinforcing effects is dopamine independent. It is further suggested that induced σ1R mechanisms may have an essential role in treatment-resistant stimulant abuse, suggesting new approaches for the development of effective medications for stimulant abuse. PMID:23187725

Self-administration of cocaine induces dopamine-independent self-administration of sigma agonists.

PubMed

Hiranita, Takato; Mereu, Maddalena; Soto, Paul L; Tanda, Gianluigi; Katz, Jonathan L

2013-03-01

Sigma(1) receptors (σ(1)Rs) are intracellularly mobile chaperone proteins implicated in several disease processes, as well as psychiatric disorders and substance abuse. Here we report that although selective σ(1)R agonists (PRE-084, (+)-pentazocine) lacked reinforcing effects in drug-naive rats, over the course of 28 experimental sessions, which was more than sufficient for acquisition of cocaine self-administration, responding was not maintained by either σ(1)R agonist. In contrast, after subjects self-administered cocaine σ(1)R agonists were readily self-administered. The induced reinforcing effects were long lasting; a response for which subjects had no history of reinforcement was newly conditioned with both σ(1)R agonists, extinguished when injections were discontinued, and reconditioned when σ(1)R agonists again followed responses. Experience with food reinforcement was ineffective as an inducer of σ(1)R agonist reinforcement. Although a variety of dopamine receptor antagonists blocked cocaine self-administration, consistent with its dopaminergic mechanism, PRE-084 self-administration was entirely insensitive to these drugs. Conversely, the σR antagonist, BD1063, blocked PRE-084 self-administration but was inactive against cocaine. In microdialysis studies i.v. PRE-084 did not significantly stimulate dopamine at doses that were self-administered in rats either with or without a cocaine self-administration experience. The results indicate that cocaine experience induces reinforcing effects of previously inactive σ(1)R agonists, and that the mechanism underlying these reinforcing effects is dopamine independent. It is further suggested that induced σ(1)R mechanisms may have an essential role in treatment-resistant stimulant abuse, suggesting new approaches for the development of effective medications for stimulant abuse.

New Technologies and Strategies to Exploit Near Earth Asteroids for Breakthrough Space Development

NASA Astrophysics Data System (ADS)

Rather, John; Powell, James; Maise, George

2010-01-01

The past two decades have brought a profound expansion of knowledge of near earth objects (NEO). If creatively exploited, NEOs can significantly increase human safety while reducing costs of exploration and development of the moon, Mars and the solar system. Synergistically, the ability to defend the Earth from devastating impacts will become very effective. A spherical volume having a radius equivalent to the moon's orbit, 400,000 km, is visited every day by approximately ten NEOs having diameters of ~10 meters, while ~30 meter diameter encounters occur about once per month. Because these objects are usually very faint and only within detectable range for a few days, they require specialized equipment to discover them with high probability of detection and to enable accurate determination of orbital parameters. Survey systems are now being implemented that are cataloging many thousands of objects larger than 30 meters, but numerous advantages will result from extending the complete NEO census down to 10 meter diameters. The typical compositions of such NEOs will range from ~80% that are low density dust & rock ``rubble piles'' to perhaps 2% containing heavy metals-properties well known from meteorite samples. It is quite possible that there will also be some fragments of short period comets that are rich in water ice and other volatile components. In this paper we will propose a set of new technologies and strategies for exploiting NEO resources that can yield important space development breakthroughs at much lower costs than existing concepts. Solar powered ``Tugboats'' deployed at the space station can rendezvous with carefully selected NEOs and steer them into captured orbits in the lunar L4 & L5 regions. Robotic equipment will then modify them for a plethora of benefits. Notably, the problem of radiation shielding against the Van Allen belts, solar flares and cosmic rays will be solved. Free transportation from low earth orbit to the moon and beyond will be feasible via shielded habitats in elliptical orbits. Large, comfortable habitats for long duration trips to Mars and beyond can be built. Propulsion for orbital transfer and maneuvering of heavy payloads can be accomplished by solar energized ejection of NEO materials. Industries can be developed based upon reconditioning materials for use in space and recovery of heavy metals for use on Earth.

Erosion of Pelton buckets and changes in turbine efficiency measured in the HPP Fieschertal

NASA Astrophysics Data System (ADS)

Abgottspon, A.; Staubli, T.; Felix, D.

2016-11-01

Geometrical changes and material loss of Pelton turbine runners as well as changes in turbine efficiency were measured at HPP Fieschertal in Valais, Switzerland. The HPP is equipped with two horizontal axis Pelton units, with each 32 MW nominal power, 7.5 m3/s design discharge, 515 m head and two injectors. The injectors and the buckets are hard-coated. Hydro-abrasive erosion was quantified based on repeated measurements on two runner buckets using (i) 3d-scanning and (ii) a coating thickness gauge. Changes in efficiency were measured by applying the sliding needle procedure. In addition to these periodically performed measurements, efficiency was also continuously monitored. The highest erosion rate was measured during the first half of the sediment season 2012 including a major sediment transport event. Because the runner was not fully reconditioned at the beginning of this season, progressive damages occurred. After the event, a splitter width of 10 mm was measured, corresponding to 1.5 % of the inner bucket width. The cut-outs were eroded by up to 9 mm towards the axis. The efficiency reductions ranged from 1 % in the year with the major sediment transport event to insignificant differences in 2014, when the sediment load was small and only little hydro-abrasive erosion occurred.

Clinical effectiveness of behavioral signs for screening chronic low-back pain patients in a work-oriented physical rehabilitation program.

PubMed

Werneke, M W; Harris, D E; Lichter, R L

1993-12-01

This prospective study investigated the relationship between behavioral sign scores (from Waddell) and the return to work status of chronic low-back pain patients who completed a work-oriented physical rehabilitation program without formal facility-related psychologic or social services. Further, the authors monitored the effect of this program on changing these scores. The program consisted of physical reconditioning through resistive exercises, flexibility and aerobic training, posture and body mechanics education, and progressive work simulation tasks and activities of daily living. One hundred eighty-three nonworking or partially disabled low-back pain patients with an average duration of 8.7 months' disability were included in the study. The presence of each of eight behavioral signs was tested for on entry and again on completion of the program. Analysis showed a significant drop in behavioral sign scores for patients who successfully returned to work. There was no significant reduction in scores for patients who did not return to work. The results suggest these signs may predict the effectiveness of treating chronic low-back pain patients in a return-to-work physical rehabilitation program. Conversely, screening for behavioral signs may identify low-back pain patients who would benefit from intensive behavioral and psychiatric testing and intervention efforts.

Life cycle test results of a bipolar nickel hydrogen battery

NASA Technical Reports Server (NTRS)

Cataldo, R. L.

1985-01-01

A history is given of low Earth orbit (LEO) laboratory test data on a 6.5 ampere-hour bipolar nickel hydrogen battery designed and built at the NASA Lewis Research Center. The bipolar concept is a means of achieving the goal of producing an acceptable battery, of higher energy density, able to withstand the demands of low-Earth-orbit regimes. Over 4100 LEO cycles were established on a ten cell battery. It seems that any perturbation on normal cycling effects the cells performance. Explanations and theories of the battery's behavior are varied and widespread among those closely associated with it. Deep discharging does provide a reconditioning effect and further experimentation is planned in this area. The battery watt-hour efficiency is about 75 percent and the time averaged, discharge voltage is about 1.26 volts for all cells at both the C/4 and LEO rate. Since a significant portion of the electrode capacity has degraded, the LEO cycle discharges are approaching depths of 90 to 100 percent of the high rate capacity. Therefore, the low end-of-discharge voltages occur precipitously after the knee of the discharge curve and is more an indication of electrode capacity and is a lesser indicator of overall cell performance.

A neutrophil elastase inhibitor improves lung function during ex vivo lung perfusion.

PubMed

Harada, Masaaki; Oto, Takahiro; Otani, Shinji; Miyoshi, Kentaroh; Okada, Masanori; Iga, Norichika; Nishikawa, Hitoshi; Sugimoto, Seiichiro; Yamane, Masaomi; Miyoshi, Shinichiro

2015-12-01

Ex vivo lung perfusion (EVLP) has been used not only for graft evaluation but also for graft reconditioning prior to lung transplantation. Inflammatory cells such as neutrophils may cause additional graft injury during EVLP. Neutrophil elastase inhibitors protect lungs against neutrophil-induced lung injury, such as acute respiratory distress syndrome. This study aimed to investigate the effect of a neutrophil elastase inhibitor during EVLP. EVLP was performed for 4 h in bilateral pig lungs that had previously experienced warm ischemia for 2 h with or without a neutrophil elastase inhibitor (treated and control groups, respectively; n = 6). Following EVLP, the left lung was transplanted into a recipient pig, and this was followed by observation for 4 h. Pulmonary functions were observed both during EVLP and during the early post-transplant stage. During EVLP, decreases in neutrophil elastase levels (P < 0.001), the wet-dry weight ratio (P < 0.05), and pulmonary vascular resistance (P < 0.01) and increases in the PaO2/FiO2 ratio (P < 0.01) and pulmonary compliance (P < 0.05) were observed in the treated group. After transplantation, decreased pulmonary vascular resistance (P < 0.05) was observed in the treated group. A neutrophil elastase inhibitor attenuated the inflammatory response during EVLP and may decrease the incidence of lung reperfusion injury after transplantation.

Factors affecting route selection and survival of steelhead kelts at Snake River dams in 2012 and 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harnish, Ryan A.; Colotelo, Alison H. A.; Li, Xinya

2015-03-31

In 2012 and 2013, Pacific Northwest National Laboratory (PNNL) conducted a study that summarized the passage route proportions and route-specific survival rates of steelhead kelts that passed through Federal Columbia River Power System (FCRPS) dams. To accomplish this, a total of 811 steelhead kelts were tagged with Juvenile Salmon Acoustic Telemetry System (JSATS) transmitters. Acoustic receivers, both autonomous and cabled, were deployed throughout the FCRPS to monitor the downstream movements of tagged kelts. Kelts were also tagged with passive integrated transponder tags to monitor passage through juvenile bypass systems (JBS) and detect returning fish. The current study evaluated data collectedmore » in 2012 and 2013 to identify environmental, temporal, operational, individual, and behavioral variables that were related to forebay residence time, route of passage, and survival of steelhead kelts at FCRPS dams on the Snake River. Multiple approaches, including 3-D tracking, bivariate and multivariable regression modeling, and decision tree analyses were used to identify the environmental, temporal, operational, individual, and behavioral variables that had the greatest effect on forebay residence time, route of passage, and route-specific and overall dam passage survival probabilities for tagged kelts at Lower Granite (LGR), Little Goose (LGS), and Lower Monumental (LMN) dams. In general, kelt behavior and discharge appeared to work independently to affect forebay residence times. Kelt behavior, primarily approach location, migration depth, and “searching” activities in the forebay, was found to have the greatest influence on their route of passage. The condition of kelts was the single most important factor affecting their survival. The information gathered in this study may be used by dam operators and fisheries managers to identify potential management actions to improve in-river survival of kelts or collection methods for kelt reconditioning programs to aid the recovery of Snake River steelhead populations.« less

Ex vivo rehabilitation of non-heart-beating donor lungs in preclinical porcine model: delayed perfusion results in superior lung function.

PubMed

Mulloy, Daniel P; Stone, Matthew L; Crosby, Ivan K; Lapar, Damien J; Sharma, Ashish K; Webb, David V; Lau, Christine L; Laubach, Victor E; Kron, Irving L

2012-11-01

Ex vivo lung perfusion (EVLP) is a promising modality for the evaluation and treatment of marginal donor lungs. The optimal timing of EVLP initiation and the potential for rehabilitation of donor lungs with extended warm ischemic times is unknown. The present study compared the efficacy of different treatment strategies for uncontrolled non-heart-beating donor lungs. Mature swine underwent hypoxic arrest, followed by 60 minutes of no-touch warm ischemia. The lungs were harvested and flushed with 4°C Perfadex. Three groups (n = 5/group) were stratified according to the preservation method: cold static preservation (CSP; 4 hours of 4°C storage), immediate EVLP (I-EVLP: 4 hours EVLP at 37°C), and delayed EVLP (D-EVLP; 4 hours of CSP followed by 4 hours of EVLP). The EVLP groups were perfused with Steen solution supplemented with heparin, methylprednisolone, cefazolin, and an adenosine 2A receptor agonist. The lungs then underwent allotransplantation and 4 hours of recipient reperfusion before allograft assessment for resultant ischemia-reperfusion injury. The donor blood oxygenation (partial pressure of oxygen/fraction of inspired oxygen ratio) before death was not different between the groups. The oxygenation after transplantation was significantly greater in the D-EVLP group than in the I-EVLP or CSP groups. The mean airway pressure, pulmonary artery pressure, and expression of interleukin-8, interleukin-1β, and tumor necrosis factor-α were all significantly reduced in the D-EVLP group. Post-transplant oxygenation exceeded the acceptable clinical levels only in the D-EVLP group. Uncontrolled non-heart-beating donor lungs with extended warm ischemia can be reconditioned for successful transplantation. The combination of CSP and EVLP in the D-EVLP group was necessary to obtain optimal post-transplant function. This finding, if confirmed clinically, will allow expanded use of nonheart-beating donor lungs. Copyright © 2012 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Artificial Gravity as a Multi-System Countermeasure: Effects on Cognitive Function

NASA Technical Reports Server (NTRS)

Sipes, Walter E.; Seaton, Kim; Slack, Kellely; Bowie, Kendra

2007-01-01

The Space Flight Cognitive Assessment Tool for Windows (WinSCAT) is a medical requirement on the International Space Station, and its purpose is to evaluate cognitive functioning after physical insult (e.g., head trauma, decompression sickness, exposure to toxic gases, medication side effects). The current objective is to assess cognitive functioning in a long duration space mission analog environment where Artificial Gravity is being applied as a countermeasure in a Bed Rest study. Methods: Fifteen male subjects (8 treatment and 7 control) who participated in 21 days of -6 degree head-down bed rest were assessed. Three practice and three baseline WinSCAT test sessions were administered during the pre-bed rest phase of study participation. During the bed rest phase, the WinSCAT test was scheduled every other day, following the centrifuge, for a total of 10 test sessions. (The treatment group received 60 minutes of centrifugation each day during the 21 days of bed rest. The control subjects were strapped to the centrifuge for the same length of time as the treatment group but were not spun.) During the post-bed rest (reconditioning) phase, the test was administered 4 times. Results: Individual differences were found both within and between the treatment and control groups. After controlling for the number of subjects in each group, the treatment group accounted for more off-nominal WinSCAT scores than the control group. Conclusions:There is some preliminary evidence that centrifuge spinning might negatively impact cognitive functioning. However, due to sample size limitations, it cannot be ascertained whether there were significant differences in cognitive performance between the treatment and control groups. If centrifugation had a negative effect on cognitive functioning, consistent decrements would be expected to be found with all treatment subjects across time. Individual differences in underlying cognitive ability and motivation level are other possible explanations for the results found in this study.

Deconditioning and Reconditioning: Humans in Stressful Environments

NASA Technical Reports Server (NTRS)

Greenleaf, John E. (Editor); Dalton, Bonnie (Technical Monitor)

2000-01-01

Deconditioning is an integrated physiological response of the body to a reduction in metabolic rate; that is, to a reduction in energy use or in exercise level. While it may involve assumption of a horizontal body position, it certainly perturbs bodily homeostasis - at least temporarily. The reduction in physical activity that causes deconditioning is often associated with an increase in the time spent, for whatever reason, in a sitting or horizontal position. As a result, orthostatic factors may also contribute to the deconditioning mechanism. The word decondition may be defined as "1: to cause extinction of (a conditioned response) 2: to cause to lose physical fitness". This definition implies that psychological/emotional factors may accompany physical deconditioning, and it is this interpretation of the word that is used throughout this volume. It is apparent that deconditioning plays a major role in the mechanism of the general adaptive (homeostatic) response that is initiated by exposure to prolonged bed rest (BR). And the total homeostatic response to BR involves more than deconditioning per se. For example, it has been shown that the restoration of plasma volume and maximal work capacity after 4 weeks of BR deconditioning left other bodily functions (submaximal exercise oxygen uptake and cardiac output, leg proprioception and posterior leg muscle thickness and volume, head-up tilt tolerance, and sleep quality) functioning at decreased levels. The precise effect of deconditioning on BR homeostasis is difficult to determine, because the fundamental interactive neuro-endocrine-immune control networks that facilitate conditioning and deconditioning also act to maintain basic wholebody homeostasis. For example, is the mechanism of BR-induced deconditioning independent of the mechanism that provokes concomitant orthostatic intolerance; that is, fainting? Assumption of the recumbent body position for prolonged periods of time, results in a new adaptive-homeostatic state. This state occurs in response to the mutually interactive effects of the change in bodily position (hydrostatic pressure), to the virtual elimination of longitudinal pressure on the bones, to the increased confinement with possible reduction in total daily energy (exercise) expenditure, to the reorientation of stimuli within the vestibular organs, and (often) to altered socio-psychological conditions. The exercise-training (reconditioning) syndrome affects total body homeostasis by facilitating increases in work capacity and endurance, whereas deconditioning decreases physical performance. There are many interrelated factors that influence the control parameters that seek to maintain the adaptive conditioning-deconditioning syndrome. These control parameters can be better elucidated by subjecting otherwise healthy ambulatory people to various stresses, such as exercise training and prolonged spaceflight, bed rest, water immersion, hyperbaria, and isolation and confinement. Changes in control parameters will be manifested in muscle function, orthostatic tolerance, cardiorespiratory responses, musculo-skeletal systems, free-radical processes, and body thermoregulation with overarching effects on the subjects' psycho-sociological states. A discussion of these factors and the control parameters constitutes the substance of this volume. Special emphasis is placed on delineating practical applications of the findings that will be of special interest to physicians, nurses, and other health-care workers.

Sequential determination of nickel and cadmium in tobacco, molasses and refill solutions for e-cigarettes samples by molecular fluorescence.

PubMed

Talio, María Carolina; Alesso, Magdalena; Acosta, Mariano; Wills, Verónica S; Fernández, Liliana P

2017-11-01

In this work, a new procedure was developed for separation and preconcentration of nickel(II) and cadmium(II) in several and varied tobacco samples. Tobacco samples were selected considering the main products consumed by segments of the population, in particular the age (youth) and lifestyle of the consumer. To guarantee representative samples, a randomized strategy of sampling was used. In the first step, a chemofiltration on nylon membrane is carried out employing eosin (Eo) and carbon nanotubes dispersed in sodium dodecylsulfate (SDS) solution (phosphate buffer pH 7). In this condition, Ni(II) was selectively retained on the solid support. After that, the filtrate liquid with Cd(II) was re-conditioned with acetic acid /acetate buffer solution (pH 5) and followed by detection. A spectrofluorimetric determination of both metals was carried out, on the solid support and the filtered aqueous solution, for Ni(II) and Cd(II), respectively. The solid surface fluorescence (SSF) determination was performed at λ em = 545nm (λ ex = 515nm) for Ni(II)-Eo complex and the fluorescence of Cd(II)-Eo was quantified in aqueous solution using λ em = 565nm (λ ex = 540nm). The calibration graphs resulted linear in a range of 0.058-29.35μgL -1 for Ni(II) and 0.124-56.20μgL -1 for Cd(II), with detection limits of 0.019 and 0.041μgL -1 (S/N = 3). The developed methodology shows good sensitivity and adequate selectivity, and it was successfully applied to the determination of trace amounts of nickel and cadmium present in tobacco samples (refill solutions for e-cigarettes, snuff used in narguille (molasses) and traditional tobacco) with satisfactory results. The new methodology was validated by ICP-MS with adequate agreement. The proposed methodology represents a novel fluorescence application to Ni(II) and Cd(II) quantification with sensitivity and accuracy similar to atomic spectroscopies, introducing for the first time the quenching effect on SSF. Copyright © 2017 Elsevier B.V. All rights reserved.

Standing Without Gravity: the Use of Lower Body Negative Pressure for Research and Reconditioning in Spaceflight

NASA Technical Reports Server (NTRS)

Charles, John B.; Campbell, M.R.; Stenger, M.B.; Lee, S.M.C.

2014-01-01

Weightlessness during spaceflight causes cephalad redistribution of intravascular and extravascular fluid, provoking cardiovascular and autonomic nervous system adaptations. The resulting functional state is appropriate for weightlessness but can result in orthostatic hypotension and intolerance during and after return to a persistent acceleration or gravitational environment. Lower body negative pressure (LBNP) applies subambient air pressure to the legs and lower abdomen inside a volume sealed at the waist, and decompression by 40-50 mmHg reverses the spaceflight-induced cephalad shift. LBNP has been used both to test the state of cardiovascular system during spaceflight and as a countermeasure by all space-faring nations. Two configurations have thus far been used in spaceflight since the first LBNP flew on the first Soviet Salyut station in 1971. The Soviet and Russian configuration, used in four Salyut stations, the Mir space station and the Russian segment of the International Space Station, has no saddle to support the body so during decompression the feet press against the bottom of the collapsible chamber which shortens and applies force against the feet proportional to the decompression level. Thus, activation of the skeletal musculature partially counteracts vascular and venous pooling in the enclosed body segments, stimulating the orthostatic compensatory mechanisms as they would be standing on Earth. In the American configuration, used aboard Skylab and the Space Shuttle, a saddle supported the astronaut so the feet did not contact the bottom of the chamber, and vascular engorgement was not countered by muscular contraction. This minimized skeletal muscle involvement, unmasked vascular compensatory mechanisms for research purposes, and allowed measurements of changes in leg volume and muscle sympathetic nerve activity. Both variants have demonstrated research and therapeutic value in appropriately designed protocols. LBNP continues to be used for research and countermeasures on ISS, and future versions may explore the value of exercise during LBNP as an integrated countermeasure. This paperwill review the history and development of LBNP for spaceflight research and therapeutic purposes.

Reconditioning of Cassini Narrow-Angle Camera

NASA Technical Reports Server (NTRS)

2002-01-01

These five images of single stars, taken at different times with the narrow-angle camera on NASA's Cassini spacecraft, show the effects of haze collecting on the camera's optics, then successful removal of the haze by warming treatments.

The image on the left was taken on May 25, 2001, before the haze problem occurred. It shows a star named HD339457.

The second image from left, taken May 30, 2001, shows the effect of haze that collected on the optics when the camera cooled back down after a routine-maintenance heating to 30 degrees Celsius (86 degrees Fahrenheit). The star is Maia, one of the Pleiades.

The third image was taken on October 26, 2001, after a weeklong decontamination treatment at minus 7 C (19 F). The star is Spica.

The fourth image was taken of Spica January 30, 2002, after a weeklong decontamination treatment at 4 C (39 F).

The final image, also of Spica, was taken July 9, 2002, following three additional decontamination treatments at 4 C (39 F) for two months, one month, then another month.

Cassini, on its way toward arrival at Saturn in 2004, is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Cassini mission for NASA's Office of Space Science, Washington, D.C.

Characterization and performance of injection molded poly(methylmethacrylate) microchips for capillary electrophoresis

PubMed Central

Nikcevic, Irena; Lee, Se Hwan; Piruska, Aigars; Ahn, Chong H.; Ridgway, Thomas H.; Limbach, Patrick A.; Wehmeyer, K. R.; Heineman, William R.; Seliskar, Carl J.

2009-01-01

Injection molded poly(methylmethacrylate) (IM-PMMA), chips were evaluated as potential candidates for capillary electrophoresis disposable chip applications. Mass production and usage of plastic microchips depends on chip-to-chip reproducibility and on analysis accuracy. Several important properties of IM-PMMA chips were considered: fabrication quality evaluated by environmental scanning electron microscope imaging, surface quality measurements, selected thermal/electrical properties as indicated by measurement of the current versus applied voltage (I–V) characteristic, and the influence of channel surface treatments. Electroosmotic flow was also evaluated for untreated and O2 reactive ion etching (RIE) treated surface microchips. The performance characteristics of single lane plastic microchip capillary electrophoresis (MCE) separations were evaluated using a mixture of two dyes - fluorescein (FL) and fluorescein isothiocyanate (FITC). To overcome non-wettability of the native IM-PMMA surface, a modifier, polyethylene oxide was added to the buffer as a dynamic coating. Chip performance reproducibility was studied for chips with and without surface modification via the process of RIE with O2 and by varying the hole position for the reservoir in the cover plate or on the pattern side of the chip. Additionally, the importance of reconditioning steps to achieve optimal performance reproducibility was also examined. It was found that more reproducible quantitative results were obtained when normalized values of migration time, peak area and peak height of FL and FITC were used instead of actual measured parameters PMID:17477932

Role of inflammatory cells and adenosine in lung ischemia reoxygenation injury using a model of lung donation after cardiac death.

PubMed

Smail, Hassiba; Baste, Jean-Marc; Gay, Arnaud; Begueret, Hugues; Noël, Romain; Morin, Jean-Paul; Litzler, Pierre-Yves

2016-04-01

The objective of this study is to analyze the role of inflammation in the lung ischemia reperfusion (IR) injury and determine the protective role of adenosine in an in vitro lung transplantation model. We used a hybrid model of lung donor after cardiac death, with warm ischemia in corpo of varying duration (2 h, 4 h) followed by in vitro lung slices culture for reoxygenation (1 h, 4 h and 24 h), in the presence or not of lymphocytes and of adenosine. To quantify the inflammatory lesions, we performed TNFα, IL2 assays, and histological analysis. In this model of a nonblood perfused system, the addition of lymphocytes during reoxygenation lead to higher rates of TNFα and IL2 after 4 h than after 2 h of warm ischemia (P < .05). These levels increased with the duration of reoxygenation and were maximum at 24 h (P < .05). In the presence of adenosine TNFα and IL2 decreased. After 2 h of warm ischemia, we observed a significant inflammatory infiltration, alveolar thickening and a necrosis of the bronchiolar cells. After 4 h of warm ischemia, alveolar cells necrosis was associated. This model showed that lymphocytes increased the inflammatory response and the histological lesions after 4 h of warm ischemia and that adenosine could have an anti-inflammatory role with potential reconditioning action when used in the pneumoplegia solution.

Summary and recommendations for initial exercise prescription

NASA Technical Reports Server (NTRS)

Stewart, Donald F.; Harris, Bernard A., Jr.

1989-01-01

The recommendations summarized herein constitute a basis on which an initial exercise prescription can be formulated. It is noteworthy that any exercise program designed currently would be an approximation. Examination of the existing space-flight data reveals a scarcity of in-flight data on which to rigorously design an exercise program. The relevant experience within the U.S. space program (with regard to long-duration space flight) is limited to the Skylab Program. Lessons learned from Skylab are relevant to the design of a Space Station exercise program, especially with regard to the total length of exercise time required, cardiovascular (CV) deconditioning/reconditioning, and bone loss. Certain observations of the U.S.S.R. exercise activities can also contribute to the formulation of an exercise prescription of Space Station. Reportedly, the U.S.S.R. uses both a bicycle ergometer and a treadmill device on long-duration missions with some degree of success. Using the third crew of Salyut 6, which was a 175-day stay, as a representative mission, the typical time dedicated to exercise varies from 2 to 3 hours per day. In addition, the cosmonauts wear an elasticized suit, called a penquin suit, for time periods ranging from 12 to 16 hours per day. This device provides a load across the axial skeleton against which the wearer must exert himself. Despite these extensive countermeasures, the effects of adaptation are not totally prevented.

Coronary arteriosclerosis in Atlantic salmon. No regression of lesions after spawning.

PubMed

Saunders, R L; Farrell, A P

1988-01-01

The incidence and severity of coronary arteriosclerosis were studied in 209 wild and cultured Atlantic salmon (Salmo salar L.) during various stages of recovery of bodily condition after spawning. All recently spawned fish had lesions of moderate to extreme severity. The incidence of lesions for each fish was high (73% to 94% of all arterial cross-sections examined). The incidence and severity of lesions did not decrease during 5 months in a group of wild salmon reconditioned in the laboratory. Wild salmon that were examined in the spring angling fishery in the Miramichi River, New Brunswick, about 5 months after spawning had a high incidence (89%) of severe lesions, not significantly different from recently spawned salmon from the same and another river. A population of cultured salmon sampled at intervals from a sea cage during 9 months after spawning showed no evidence of lesion regression, but rather a continued increase in both incidence and severity during recovery of bodily condition and growth. Thus, in contrast with previous studies with steelhead trout and Atlantic salmon where the possibility of lesion regression has been suggested, our observations on a large number of Atlantic salmon from various sources gave no evidence of lesion regression. Coronary arteriosclerosis in Salmo salar appears to be a progressive condition, which continues during recovery of bodily condition and growth after spawning.

The mentally ill: the way they perceive their own illness and their expectations from the society.

PubMed

Lawska, W; Zieba, M; Lyznicka, M; Sułek, J; Półtorakk, M

2006-09-01

People diagnosed as mentally ill face the suffering of their own disease as well as the social stigmatization, which, in turn, can aggravate their psychopathological symptoms and exacerbate their social isolation. Mental diseases and their symptoms cause an ill person to seem recondite for the people around. She or he feels different from everybody else, thus requires special care, sensitivity, and respect from the others. A supportive and full of acceptation environment is indispensable to optimize socio-professional therapy and rehabilitation of the ill. The society should possess some knowledge of mental diseases and respect the dignity and human rights of the ill. The aim of our work was to show how the mentally ill perceive their illness as well as specify the patients' expectations concerning their relations with the healthy people from their environment. This work consists of a theoretical part, a research which contains the results of a questionnaire, and conclusions. There were 52 patients who took part in the research. They were all aware of their illness, although the research was held during the lighter phase of the disease or its remission. The analysis of the collected data indicates that the ill perceived their disease as a burden and obstacle to fulfilling their principal aims. The disease also engendered negative emotional reactions in them and significantly impaired the quality of their life.

Adaptation of Sediment Connectivity Index for Swedish catchments and application for flood prediction of roads

NASA Astrophysics Data System (ADS)

Cantone, Carolina; Kalantari, Zahra; Cavalli, Marco; Crema, Stefano

2016-04-01

Climate changes are predicted to increase precipitation intensities and occurrence of extreme rainfall events in the near future. Scandinavia has been identified as one of the most sensitive regions in Europe to such changes; therefore, an increase in the risk for flooding, landslides and soil erosion is to be expected also in Sweden. An increase in the occurrence of extreme weather events will impose greater strain on the built environment and major transport infrastructures such as roads and railways. This research aimed to identify the risk of flooding at the road-stream intersections, crucial locations where water and debris can accumulate and cause failures of the existing drainage facilities. Two regions in southwest of Sweden affected by an extreme rainfall event in August 2014, were used for calibrating and testing a statistical flood prediction model. A set of Physical Catchment Descriptors (PCDs) including road and catchment characteristics was identified for the modelling. Moreover, a GIS-based topographic Index of Sediment Connectivity (IC) was used as PCD. The novelty of this study relies on the adaptation of IC for describing sediment connectivity in lowland areas taking into account contribution of soil type, land use and different patterns of precipitation during the event. A weighting factor for IC was calculated by estimating runoff calculated with SCS Curve Number method, assuming a constant value of precipitation for a given time period, corresponding to the critical event. The Digital Elevation Model of the study site was reconditioned at the drainage facilities locations to consider the real flow path in the analysis. These modifications led to highlight the role of rainfall patterns and surface runoff for modelling sediment delivery in lowland areas. Moreover, it was observed that integrating IC into the statistic prediction model increased its accuracy and performance. After the calibration procedure in one of the study areas, the model was validated in the other study area, located in the central part of Sweden, since this experienced flooding in relation to the same triggering event.

Effects of elastic resistance exercise on body composition and physical capacity in older women with sarcopenic obesity

PubMed Central

Liao, Chun-De; Tsauo, Jau-Yih; Lin, Li-Fong; Huang, Shih-Wei; Ku, Jan-Wen; Chou, Lin-Chuan; Liou, Tsan-Hon

2017-01-01

Abstract Background: Sarcopenia is associated with loss of muscle mass and an increased risk of physical disability in elderly people. However, the prevalence of sarcopenia has increased in obese elderly populations. The purpose of this study was to identify the clinical efficacy of elastic resistance exercise training (RET) in patients with sarcopenic obesity. Methods: This study was conducted at the rehabilitation center of a university-based teaching hospital and was designed as a prospective and randomized controlled trial with an intention-to-treat analysis. A total of 46 women aged 67.3 (5.2) years were randomly assigned to an experimental group (EG) and control group (CG). The EG underwent elastic RET for 12 weeks, and the CG received no RET intervention. All outcome measures were assessed at the baseline and posttest, including body composition measured using dual-energy X-ray absorptiometry, muscle quality (MQ) defined as a ratio of muscular strength to muscle mass, and physical capacity assessed using functional mobility tests. One-way analysis of covariance and Pearson correlation were used to compare outcomes between the 2 groups and to identify the relationship between changes in body composition and physical outcomes, respectively. A chi-square test was performed to identify differences in qualitative data between the 2 groups. Results: At the posttest, a significant between-group difference was observed in fat-free mass, MQ, and physical capacity (all P < .05); and a significant correlation was found between leg-lean-mass change and gait speed (r = 0.36; P < .05). After 12 weeks of elastic RET intervention, the EG had significantly fewer patients exhibiting sarcopenia (P < .05) and experiencing physical difficulty (P < .001) than the CG. Conclusion: The present data suggest that elastic resistance exercise exerted benefits on the body composition, MQ, and physical function in patients with sarcopenic obesity. Regular exercise incorporating elastic RET should be used to attenuate muscle mass loss and prevent physical difficulty in obese older adults with sarcopenia on reconditioning therapy. Trial Registration: Chinese Clinical Trial Registry, ChiCTR-IPR-15006069. PMID:28591061

Drug Development in Conformational Diseases: A Novel Family of Chemical Chaperones that Bind and Stabilise Several Polymorphic Amyloid Structures

PubMed Central

Bencomo, Alberto; Lara-Martínez, Reyna; Rivera-Marrero, Suchitil; Domínguez, Guadalupe; Pérez-Perera, Rafaela; Jiménez-García, Luis Felipe; Altamirano-Bustamante, Nelly F.; Diaz-Delgado, Massiel; Vedrenne, Fernand; Rivillas-Acevedo, Lina; Pasten-Hidalgo, Karina; Segura-Valdez, María de Lourdes; Islas-Andrade, Sergio; Garrido-Magaña, Eulalia; Perera-Pintado, Alejandro; Prats-Capote, Anaís; Rodríguez-Tanty, Chryslaine; Altamirano-Bustamante, Myriam M.

2015-01-01

The increasing prevalence of conformational diseases, including Alzheimer's disease, type 2 Diabetes Mellitus and Cancer, poses a global challenge at many different levels. It has devastating effects on the sufferers as well as a tremendous economic impact on families and the health system. In this work, we apply a cross-functional approach that combines ideas, concepts and technologies from several disciplines in order to study, in silico and in vitro, the role of a novel chemical chaperones family (NCHCHF) in processes of protein aggregation in conformational diseases. Given that Serum Albumin (SA) is the most abundant protein in the blood of mammals, and Bovine Serum Albumin (BSA) is an off-the-shelf protein available in most labs around the world, we compared the ligandability of BSA:NCHCHF with the interaction sites in the Human Islet Amyloid Polypeptide (hIAPP):NCHCHF, and in the amyloid pharmacophore fragments (Aβ17–42 and Aβ16–21):NCHCHF. We posit that the merging of this interaction sites is a meta-structure of pharmacophore which allows the development of chaperones that can prevent protein aggregation at various states from: stabilizing the native state to destabilizing oligomeric state and protofilament. Furthermore to stabilize fibrillar structures, thus decreasing the amount of toxic oligomers in solution, as is the case with the NCHCHF. The paper demonstrates how a set of NCHCHF can be used for studying and potentially treating the various physiopathological stages of a conformational disease. For instance, when dealing with an acute phase of cytotoxicity, what is needed is the recruitment of cytotoxic oligomers, thus chaperone F, which accelerates fiber formation, would be very useful; whereas in a chronic stage it is better to have chaperones A, B, C, and D, which stabilize the native and fibril structures halting self-catalysis and the creation of cytotoxic oligomers as a consequence of fiber formation. Furthermore, all the chaperones are able to protect and recondition the cerebellar granule cells (CGC) from the cytotoxicity produced by the hIAPP20–29 fragment or by a low potassium medium, regardless of their capacity for accelerating or inhibiting in vitro formation of fibers. In vivo animal experiments are required to study the impact of chemical chaperones in cognitive and metabolic syndromes. PMID:26327208

Carving out turf in a biodiversity hotspot: multiple, previously unrecognized shrew species co-occur on Java Island, Indonesia.

PubMed

Esselstyn, Jacob A; Maharadatunkamsi; Achmadi, Anang S; Siler, Cameron D; Evans, Ben J

2013-10-01

In theory, competition among species in a shared habitat results in niche separation. In the case of small recondite mammals such as shrews, little is known about their autecologies, leaving open questions regarding the degree to which closely related species co-occur and how or whether ecological niches are partitioned. The extent to which species are able to coexist may depend on the degree to which they exploit different features of their habitat, which may in turn influence our ability to recognize them as species. We explored these issues in a biodiversity hotspot, by surveying shrew (genus Crocidura) diversity on the Indonesian island of Java. We sequenced portions of nine unlinked genes in 100-117 specimens of Javan shrews and incorporated homologous data from most known Crocidura species from other parts of island South-East Asia. Current taxonomy recognizes four Crocidura species on Java, including two endemics. However, our phylogenetic, population genetic and species delimitation analyses identify five species on the island, and all are endemic to Java. While the individual ranges of these species may not overlap in their entirety, we found up to four species living syntopically and all five species co-occurring on one mountain. Differences in species' body size, use of above ground-level habitats by one species and habitat partitioning along ecological gradients may have facilitated species diversification and coexistence. © 2013 John Wiley & Sons Ltd.

Parallels between astronauts and terrestrial patients - Taking physiotherapy rehabilitation "To infinity and beyond".

PubMed

Hides, Julie; Lambrecht, Gunda; Ramdharry, Gita; Cusack, Rebecca; Bloomberg, Jacob; Stokes, Maria

2017-01-01

Exposure to the microgravity environment induces physiological changes in the cardiovascular, musculoskeletal and sensorimotor systems in healthy astronauts. As space agencies prepare for extended duration missions, it is difficult to predict the extent of the effects that prolonged exposure to microgravity will have on astronauts. Prolonged bed rest is a model used by space agencies to simulate the effects of spaceflight on the human body, and bed rest studies have provided some insights into the effects of immobilisation and inactivity. Whilst microgravity exposure is confined to a relatively small population, on return to Earth, the physiological changes seen in astronauts parallel many changes routinely seen by physiotherapists on Earth in people with low back pain (LBP), muscle wasting diseases, exposure to prolonged bed rest, elite athletes and critically ill patients in intensive care. The medical operations team at the European Space Agency are currently involved in preparing astronauts for spaceflight, advising on exercises whilst astronauts are on the International Space Station, and reconditioning astronauts following their return. There are a number of parallels between this role and contemporary roles performed by physiotherapists working with elite athletes and muscle wasting conditions. This clinical commentary will draw parallels between changes which occur to the neuromuscular system in the absence of gravity and conditions which occur on Earth. Implications for physiotherapy management of astronauts and terrestrial patients will be discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of heat and moisture exchangers on tracheal mucociliary clearance in laryngectomized patients: a multi-center case-control study.

PubMed

van den Boer, C; Muller, S H; van der Noort, V; Olmos, R A Valdés; Minni, A; Parrilla, C; Hilgers, F J M; van den Brekel, M W M; van der Baan, S

2015-11-01

After total laryngectomy, inspired air is no longer optimally conditioned by the upper airways. Impaired mucociliary clearance and histological changes of respiratory epithelium, such as loss of ciliated cells, have been described in laryngectomized patients. Heat and moisture exchangers (HMEs) are passive humidifiers that re-condition the inspired air. Aim of this study was to assess the effect of HMEs on tracheal epithelium and tracheal mucus transport velocity (TMV). Tracheal brush biopsies were collected in three groups of TLE patients: 21 long-term HME users, 10 non-HME users, and 16 non-HME users before and after 4-9 months HME use. Tracheal epithelium biopsies were assessed using a digital high-speed camera mounted onto a light microscope. TMV was determined by scintigraphy in the first two patient groups. Significantly more ciliated cells were found in HME users compared to non-HME users (p = 0.05). TMV was higher in HME users (median 2 mm/min; 0-7.9) compared to non-HME users (median 0.8 mm/min; 0-12.3), but this difference was not significant (p = 0.37). One-hour breathing without HME in long-term HME users did not measurably decrease TMV (p = 0.13). The long-term use of an HME restores/prevents the loss of tracheal ciliated cells. A significant improvement in TMV was not found. Short-term (one hour) detachment of an HME has no measurable effect on TMV.

Can extended photoactivation time of resin-based fissure sealer materials improve ultimate tensile strength and decrease water sorption/solubility?

PubMed

Borges, Boniek Castillo Dutra; Souza-Júnior, Eduardo José; Catelan, Anderson; Paulillo, Luís Alexandre Maffei Sartini; Aguiar, Flávio Henrique Baggio

2012-10-01

This study aimed to evaluate the impact of extended photoactivation time on ultimate tensile strength (UTS), water sorption (WS) and solubility (WSB) of resin-based materials used as fissure-sealants. A fissure-sealant (Fluroshield) and a flowable composite (Permaflo) polymerized for 20 and 60 seconds were tested. For UTS, 20 hourglass shaped samples were prepared representing two materials and two photoactivation time (n=5). After 24-h dry-storage, samples were tested in tension using a universal testing machine at a cross-head speed of 0.5 mm/min (UTS was calculated in MPa). For WS and WSB, 20 disks with 5 mm diameter and 1 mm height (n=5) were prepared and volumes were calculated (mm(3)). They were transferred to desiccators until a constant mass was obtained (m1) and were subsequently immersed in distilled water until no alteration in mass was detected (m2). Samples were reconditioned to constant mass in desiccators (m3). WS and WSB were determined using the equations m2-m3/V and m1-m3/V, respectively. Data were subjected to two-way ANOVA and Tukey's HSD test (P<.05). There was no significant difference between materials or photoactivation times for the UTS and WS. Permaflo presented lower but negative WSB compared to Fluroshield. Extended photoactivation time did not improve the physical properties tested. Fluroshield presented physical properties that were similar to or better than Permaflo.

Volumetric dimensional changes of dental light-cured dimethacrylate resins after sorption of water or ethanol.

PubMed

Sideridou, Irini D; Karabela, Maria M; Vouvoudi, Evagelia Ch

2008-08-01

This study evaluated the influence of water and ethanol sorption on the volumetric dimensional changes of resins prepared by light curing of Bis-GMA, Bis-EMA, UDMA, TEGDMA or D(3)MA. The resin specimens (15mm diameterx1mm height) were immersed in water or ethanol 37+/-1 degrees C for 30 days. Volumetric changes of specimens were obtained via accurate mass measurements using Archimedes principle. The specimens were reconditioned by dry storage in an oven at 37+/-1 degrees C until constant mass was obtained and then immersed in water or ethanol for 30 days. The volumetric changes of specimens were determined and compared to those obtained from the first sorption. Resins showed similar volume increase during the first and second sorptions of water or ethanol. The volume increase due to water absorption is in the following order: poly-TEGDMA>poly-Bis-GMA>poly-UDMA>poly-Bis-EMA>poly-D(3)MA. On the contrary, the order in ethanol is poly-Bis-GMA>poly-UDMA>poly-TEGDMA>poly-Bis-EMA approximately poly-D(3)MA. The volume increase was found to depend linearly on the amount of water or ethanol absorbed. In the choice of monomers for preparation of composite resin matrix the volume increase in the resin after immersion in water or ethanol must be taken into account. Resins of Bis-EMA and D(3)MA showed the lowest values.

[Albert Schweitzer. The man as a symbol].

PubMed

Urdaneta-Carruyo, Eliexer

2007-01-01

Albert Schweitzer, the great missionary physician from the XXth century, had a versatile personality that integrated multiple talents, leading to the slightly frequent conjunction of the thinker with the man of action, and the humanist with the scientist and the artist. He studied all these disciplines in a brilliant manner: Philosophy, Theology, Music and Medicine; he was also a great scholar of Bach's work, Jesus Christ and the civilization history. In his maturity, this great man renounced to the fame and glory gained as intellectual and musician, to dedicate his life as a physician for the forgotten African natives. His deeply religious spirit allowed him to penetrate into the most recondite of the human soul; in his personality, he expressed in its entire dimension the eternally unsatisfied desire of the solitary man, against the immensity of the universe. His philosophy, based on the respect for life, was realized throughout the practice of the medical profession. His noble character and personality was based on the man as symbol, since it was not so much what he did helping people but what people could do to others due to him. His singular example represented a moral force in the world, superior to millions of men armed for a war. In 1953, he received the Nobel Peace Prize for his philanthropic work in Africa during more that fifty years, and for his deep love to the living beings. He was transformed in a perennial legend as the Lambaréné doctor.

Waste-water characterization and hazardous-waste technical assistance survey, Bergstrom AFB tTxas. Final report, 6-15 March 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hedgecock, N.S.

1990-01-01

At the request of 67 Combat Support Group/DEEV the Air Force Occupational and Environmental Health Laboratory conducted a waste-water characterization and hazardous-waste technical assistance survey at Bergstrom AFB (BAFB) from 6-15 Mar 89. The scope of the waste-water survey was to characterize the effluent exiting the base and the effluent from 23 industrial facilities and 10 food-serving facilities. The scope of the hazardous-waste survey was to address hazardous-waste-management practices and explore opportunities for hazardous waste minimization. Specific recommendations from the survey include: (1) Accompany City of Austin personnel during waste-water sampling procedures; (2) Sample at the manhole exiting the mainmore » lift station rather than at the lift station wet well; (3) Split waste-water samples with the City of Austin for comparison of results; (4) Ensure that oil/water separators and grease traps are functioning properly and are cleaned out regularly; (5) Limit the quantity of soaps and solvents discharged down the drain to the sanitary sewer; (6) Establish a waste disposal contract for the removal of wastes in the Petroleum Oils and Lubricants underground storage tanks. (7) Remove, analyze, and properly dispose of oil contaminated soil from accumulation sites. (8) Move indoors or secure, cover, and berm the aluminum sign reconditioning tank at 67 Civil Engineering Squadron Protective Coating. (9) Connect 67 Combat Repair Squadron Test Cell floor drains to the sanitary sewer.« less

Hypothermic oxygenated machine perfusion (HOPE) for orthotopic liver transplantation of human liver allografts from extended criteria donors (ECD) in donation after brain death (DBD): a prospective multicentre randomised controlled trial (HOPE ECD-DBD).

PubMed

Czigany, Zoltan; Schöning, Wenzel; Ulmer, Tom Florian; Bednarsch, Jan; Amygdalos, Iakovos; Cramer, Thorsten; Rogiers, Xavier; Popescu, Irinel; Botea, Florin; Froněk, Jiří; Kroy, Daniela; Koch, Alexander; Tacke, Frank; Trautwein, Christian; Tolba, Rene H; Hein, Marc; Koek, Ger H; Dejong, Cornelis H C; Neumann, Ulf Peter; Lurje, Georg

2017-10-10

Orthotopic liver transplantation (OLT) has emerged as the mainstay of treatment for end-stage liver disease. In an attempt to improve the availability of donor allografts and reduce waiting list mortality, graft acceptance criteria were extended increasingly over the decades. The use of extended criteria donor (ECD) allografts is associated with a higher incidence of primary graft non-function and/or delayed graft function. As such, several strategies have been developed aiming at reconditioning poor quality ECD liver allografts. Hypothermic oxygenated machine perfusion (HOPE) has been successfully tested in preclinical experiments and in few clinical series of donation after cardiac death OLT. HOPE ECD-DBD is an investigator-initiated, open-label, phase-II, prospective multicentre randomised controlled trial on the effects of HOPE on ECD allografts in donation after brain death (DBD) OLT. Human whole organ liver grafts will be submitted to 1-2 hours of HOPE (n=23) via the portal vein before implantation and are going to be compared with a control group (n=23) of patients transplanted after conventional cold storage. Primary (peak and Δ peak alanine aminotransferase within 7 days) and secondary (aspartate aminotransferase, bilirubin and international normalised ratio, postoperative complications, early allograft dysfunction, duration of hospital and intensive care unit stay, 1-year patient and graft survival) endpoints will be analysed within a 12-month follow-up. Extent of ischaemia-reperfusion (I/R) injury will be assessed using liver tissue, perfusate, bile and serum samples taken during the perioperative phase of OLT. The study was approved by the institutional review board of the RWTH Aachen University, Aachen, Germany (EK 049/17). The current paper represent the pre-results phase. First results are expected in 2018. NCT03124641. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Analysis and implementation of PM sampling methodology protocols to aid in the development of an ARP (aerospace recommended practice) for aircraft non-volatile PM measurements

NASA Astrophysics Data System (ADS)

Catron, Brian Lowell

Due to the growing concerns that particulate matter (PM) have on health and the environment, there is a need to include mass and number non-volatile PM measurements to current jet engine certification. This thesis looks at the necessary work required to help produce recommendations and perform background research to aid in the creation of an improved Aerospace Recommended Practice (ARP) (by the SAE E-31 Committee). This work addressed the following issues. The investigation began in the Missouri S&T Center of Excellence for Aerospace Particulate Emissions Reduction Research (COE) laboratory with an examination of the jet engine surrogate used, the miniCAST, as well as integrating it into the COE's PM measurement system. A clean PM sample line was aged by running a PM source through it until a steady state signal was measured by the instruments in order to make a recommended procedure for line conditioning as well as reconditioning. Several eductors were studied for their performance characteristics and compared against desired characteristics, which suggested a need to include a pressure relief valve to cap the sample pressure at the eductor entrance. A volatile particle remover (VPR) was studied for penetration and ability to remove volatile material. A prototype E-31 system was setup at the second alternative aviation fuel experiment (AAFEX II), which provided a direct comparison of probe tip dilution and downstream dilution and found comparable results when line loss was taken into account. Also performed at AAFEX II was a study that compared measured sample line penetration with theoretical calculations finding that theoretical calculations were an accurate alternative of measuring line loss. Two PM sampling systems were setup at an ARP demonstration and both system had similar results for both number and mass measurement. An instrument comparison was also performed that included an examination of condensation particle counter (CPC) cutoff size. It was also determined that a VPR was necessary to ensure that number instrument devices were only measuring non-volatile PM.

In-season heat stress compromises postharvest quality and low-temperature sweetening resistance in potato (Solanum tuberosum L.).

PubMed

Zommick, Daniel H; Knowles, Lisa O; Pavek, Mark J; Knowles, N Richard

2014-06-01

The effects of soil temperature during tuber development on physiological processes affecting retention of postharvest quality in low-temperature sweetening (LTS) resistant and susceptible potato cultivars were investigated. 'Premier Russet' (LTS resistant), AO02183-2 (LTS resistant) and 'Ranger Russet' (LTS susceptible) tubers were grown at 16 (ambient), 23 and 29 °C during bulking (111-164 DAP) and maturation (151-180 DAP). Bulking at 29 °C virtually eliminated yield despite vigorous vine growth. Tuber specific gravity decreased as soil temperature increased during bulking, but was not affected by temperature during maturation. Bulking at 23 °C and maturation at 29 °C induced higher reducing sugar levels in the proximal (basal) ends of tubers, resulting in non-uniform fry color at harvest, and abolished the LTS-resistant phenotype of 'Premier Russet' tubers. AO02183-2 tubers were more tolerant of heat for retention of LTS resistance. Higher bulking and maturation temperatures also accelerated LTS and loss of process quality of 'Ranger Russet' tubers, consistent with increased invertase and lower invertase inhibitor activities. During LTS, tuber respiration fell rapidly to a minimum as temperature decreased from 9 to 4 °C, followed by an increase to a maximum as tubers acclimated to 4 °C; respiration then declined over the remaining storage period. The magnitude of this cold-induced acclimation response correlated directly with the extent of buildup in sugars over the 24-day LTS period and thus reflected the effects of in-season heat stress on propensity of tubers to sweeten and lose process quality at 4 °C. While morphologically indistinguishable from control tubers, tubers grown at elevated temperature had different basal metabolic (respiration) rates at harvest and during cold acclimation, reduced dormancy during storage, greater increases in sucrose and reducing sugars and associated loss of process quality during LTS, and reduced ability to improve process quality through reconditioning. Breeding for retention of postharvest quality and LTS resistance should consider strategies for incorporating more robust tolerance to in-season heat stress.

Seismicity Pattern and Fault Structure in the Central Himalaya Seismic Gap Using Precise Earthquake Hypocenters and their Source Parameters

NASA Astrophysics Data System (ADS)

Mendoza, M.; Ghosh, A.; Rai, S. S.

2017-12-01

The devastation brought on by the Mw 7.8 Gorkha earthquake in Nepal on 25 April 2015, reconditioned people to the high earthquake risk along the Himalayan arc. It is therefore imperative to learn from the Gorkha earthquake, and gain a better understanding of the state of stress in this fault regime, in order to identify areas that could produce the next devastating earthquake. Here, we focus on what is known as the "central Himalaya seismic gap". It is located in Uttarakhand, India, west of Nepal, where a large (> Mw 7.0) earthquake has not occurred for over the past 200 years [Rajendran, C.P., & Rajendran, K., 2005]. This 500 - 800 km long along-strike seismic gap has been poorly studied, mainly due to the lack of modern and dense instrumentation. It is especially concerning since it surrounds densely populated cities, such as New Delhi. In this study, we analyze a rich seismic dataset from a dense network consisting of 50 broadband stations, that operated between 2005 and 2012. We use the STA/LTA filter technique to detect earthquake phases, and the latest tools contributed to the Antelope software environment, to develop a large and robust earthquake catalog containing thousands of precise hypocentral locations, magnitudes, and focal mechanisms. By refining those locations in HypoDD [Waldhauser & Ellsworth, 2000] to form a tighter cluster of events using relative relocation, we can potentially illustrate fault structures in this region with high resolution. Additionally, using ZMAP [Weimer, S., 2001], we perform a variety of statistical analyses to understand the variability and nature of seismicity occurring in the region. Generating a large and consistent earthquake catalog not only brings to light the physical processes controlling the earthquake cycle in an Himalayan seismogenic zone, it also illustrates how stresses are building up along the décollment and the faults that stem from it. With this new catalog, we aim to reveal fault structure, study seismicity patterns, and assess the potential seismic hazard of the central Himalaya seismic gap.

Using conditioned suppression to investigate compulsive drug seeking in rats.

PubMed

Limpens, Jules H W; Schut, Evelien H S; Voorn, Pieter; Vanderschuren, Louk J M J

2014-09-01

Persistent drug seeking despite harmful consequences is a defining characteristic of addiction. Recent preclinical studies have demonstrated the occurrence of this hallmark feature of addictive behaviour in rodents. For example, it has been shown that the ability of an aversive conditioned stimulus (CS) to suppress cocaine seeking was diminished after an extended self-administration history. The present study aimed to optimize the experimental conditions to examine conditioned suppression of sucrose and cocaine seeking in rats, and its dependence on the longevity of self-administration experience. We investigated whether conditioned suppression depends on the intensity and quantity of footshocks during conditioning. In addition, the effects of CS omission, extinction and reconditioning were investigated, as well as the influence of the CS interval sequence on conditioned suppression. We also compared conditioned suppression after a limited and extended sucrose or cocaine self-administration history. We found that conditioned suppression depended on the intensity rather than the quantity of footshocks, whereby a higher footshock intensity was necessary to induce suppression of cocaine seeking compared to sucrose seeking. Conditioned suppression was most pronounced when the test started with presentation of the aversive CS, and conditioned suppression could be extinguished and reacquired. In addition, conditioned suppression of cocaine, but not sucrose seeking was reduced after extended self-administration experience. These data provide a detailed analysis of conditioned suppression of cocaine and sucrose seeking. Importantly, we confirm the usefulness of conditioned suppression to study persistent drug seeking after prolonged drug self-administration. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Spacelab

NASA Image and Video Library

1992-06-01

The first United States Microgravity Laboratory (USML-1) flew in orbit inside the Spacelab science module for extended periods, providing scientists and researchers greater opportunities for research in materials science, fluid dynamics, biotechnology (crystal growth), and combustion science. In this photograph, Astronaut Bornie Dunbar and Astronaut Larry DeLucas are conducting the Lower Body Negative Pressure (LBNP) experiment, which is to protect the health and safety of the crew and to shorten the time required to readapt to gravity when they return to Earth. When humans go into space, the lack of gravity causes many changes in the body. One change is that fluids normally kept in the lower body by gravity, shift upward to the head and chest. This is why astronauts' faces appear chubby or puffy. The change in fluid volume also affects the heart. The reduced fluid volume means that there is less blood to circulate through the body. Crewmembers may experience reduced blood flow to the brain when returning to Earth. This leads to fainting or near-fainting episodes. With the use of LBNP to simulate the pull of gravity in conjunction with fluids, salt tablets can recondition the cardiovascular system. This treatment, called "soak," is effective up to 24 hours. The LBNP uses a three-layer collapsible cylinder that seals around the crewmember's waist which simulates the effects of gravity and helps pull fluids into the lower body. The data collected will be analyzed to determine physiological changes in the crewmembers and effectiveness of the treatment. The USML-1 was launched aboard the Space Shuttle Orbiter Columbia (STS-50) on June 25, 1992.

Assessing Sensorimotor Function Following ISS with Computerized Dynamic Posturography.

PubMed

Wood, Scott J; Paloski, William H; Clark, Jonathan B

2015-12-01

Postflight postural ataxia reflects both the control strategies adopted for movement in microgravity and the direct effects of deconditioning. Computerized dynamic posturography (CDP) has been used during the first decade of the International Space Station (ISS) expeditions to quantify the initial postflight decrements and recovery of postural stability. The CDP data were obtained on 37 crewmembers as part of their pre- and postflight medical examinations. Sensory organization tests evaluated the ability to make effective use of (or suppress inappropriate) visual, vestibular, and somatosensory information for balance control. This report focuses on eyes closed conditions with either a fixed or sway-referenced base of support, with the head erect or during pitch-head tilts (± 20° at 0.33 Hz). Equilibrium scores were derived from peak-to-peak anterior-posterior sway. Motor-control tests were also used to evaluate a crewmember's ability to automatically recover from unexpected support-surface perturbations. The standard Romberg condition was the least sensitive. Dynamic head tilts led to increased incidence of falls and revealed significantly longer recovery than head-erect conditions. Improvements in postflight postural performance during the later expeditions may be attributable to higher preflight baselines and/or advanced exercise capabilities aboard the ISS. The diagnostic assessment of postural instability is more pronounced during unstable-support conditions requiring active head movements. In addition to supporting return-to-duty decisions by flight surgeons, the CDP provides a standardized sensorimotor measure that can be used to evaluate the effectiveness of countermeasures designed to either minimize deconditioning on orbit or promote reconditioning upon return to Earth.

Exercise and the Athlete With Infectious Mononucleosis.

PubMed

Shephard, Roy J

2017-03-01

To determine appropriate management of the active individual with infectious mononucleosis (IM), including issues of diagnosis, the determination of splenomegaly, and other measures of disease status, the relationship of the disease to chronic fatigue syndrome (CFS), and the risks of exercise at various points in the disease process. An Ovid/MEDLINE search (January 1996-June 2015) was widely supplemented by "similar articles" found in Ovid/MEDLINE and PubMed, reference lists, and personal files. Clinical diagnoses of IM are unreliable. Traditional laboratory indicators (lymphocytosis, abnormal lymphocytes, and a heterophile-positive slide test) can be supplemented by more sensitive and more specific but also more costly Epstein-Barr antigen determinations. Clinical estimates of splenomegaly are fallible. Laboratory determinations, commonly by 2D ultrasonography, must take account of methodology, the formulae used in calculations and the individual's body size. The SD of normal values matches the typical increase of size in IM, but repeat measurements can help to monitor regression of the disease. The main risks to the athlete are spontaneous splenic rupture (seen in 0.1%-0.5% of patients and signaled by acute abdominal pain) and progression to chronic fatigue, best avoided by 3 to 4 weeks of restricted activity followed by graded reconditioning. A full recovery of athletic performance is usual with 2 to 3 months of conservative management. Infectious mononucleosis is a common issue for young athletes. But given accurate diagnosis and the avoidance of splenic rupture and progression to CFS through a few weeks of restricted activity, long-term risks to the health of athletes are few.

STS-50 USML-1, Onboard Photograph

NASA Technical Reports Server (NTRS)

1992-01-01

The first United States Microgravity Laboratory (USML-1) flew in orbit inside the Spacelab science module for extended periods, providing scientists and researchers greater opportunities for research in materials science, fluid dynamics, biotechnology (crystal growth), and combustion science. In this photograph, Astronaut Bornie Dunbar and Astronaut Larry DeLucas are conducting the Lower Body Negative Pressure (LBNP) experiment, which is to protect the health and safety of the crew and to shorten the time required to readapt to gravity when they return to Earth. When humans go into space, the lack of gravity causes many changes in the body. One change is that fluids normally kept in the lower body by gravity, shift upward to the head and chest. This is why astronauts' faces appear chubby or puffy. The change in fluid volume also affects the heart. The reduced fluid volume means that there is less blood to circulate through the body. Crewmembers may experience reduced blood flow to the brain when returning to Earth. This leads to fainting or near-fainting episodes. With the use of LBNP to simulate the pull of gravity in conjunction with fluids, salt tablets can recondition the cardiovascular system. This treatment, called 'soak,' is effective up to 24 hours. The LBNP uses a three-layer collapsible cylinder that seals around the crewmember's waist which simulates the effects of gravity and helps pull fluids into the lower body. The data collected will be analyzed to determine physiological changes in the crewmembers and effectiveness of the treatment. The USML-1 was launched aboard the Space Shuttle Orbiter Columbia (STS-50) on June 25, 1992.

Feasibility, safety, and economic implications of whey-recovered water in cleaning-in-place systems: A case study on water conservation for the dairy industry.

PubMed

Meneses, Yulie E; Flores, Rolando A

2016-05-01

Water scarcity is threatening food security and business growth in the United States. In the dairy sector, most of the water is used in cleaning applications; therefore, any attempt to support water conservation in these processes will have a considerable effect on the water footprint of dairy products. This study demonstrates the viability for recovering good quality water from whey, a highly pollutant cheese-making by-product, to be reused in cleaning-in-place systems. The results obtained in this study indicate that by using a combined ultrafiltration and reverse osmosis system, 47% of water can be recovered. This system generates protein and lactose concentrates, by-products that once spray-dried fulfill commercial standards for protein and lactose powders. The physicochemical and microbiological quality of the recovered permeate was also analyzed, suggesting suitable properties to be reused in the cleaning-in-place system without affecting the quality and safety of the product manufactured on the cleaned equipment. A cost analysis was conducted for 3 cheese manufacturing levels, considering an annual production of 1, 20, and 225 million liters of whey. Results indicate the feasibility of this intervention in the dairy industry, generating revenues of $0.18, $3.05, and $33.4 million per year, respectively. The findings provide scientific evidence to promote the safety of reuse of reconditioned water in food processing plants, contributing to building a culture of water conservation and sustainable production throughout the food supply chain. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Kidney and liver transplantation in the elderly.

PubMed

Sutherland, A I; IJzermans, J N M; Forsythe, J L R; Dor, F J M F

2016-01-01

Transplant surgery is facing a shortage of deceased donor organs. In response, the criteria for organ donation have been extended, and an increasing number of organs from older donors are being used. For recipients, the benefits of transplantation are great, and the growing ageing population has led to increasing numbers of elderly patients being accepted for transplantation. The literature was reviewed to investigate the impact of age of donors and recipients in abdominal organ transplantation, and to highlight aspects of the fine balance in donor and recipient selection and screening, as well as allocation policies fair to young and old alike. Overall, kidney and liver transplantation from older deceased donors have good outcomes, but are not as good as those from younger donors. Careful donor selection based on risk indices, and potentially biomarkers, special allocation schemes to match elderly donors with elderly recipients, and vigorous recipient selection, allows good outcomes with increasing age of both donors and recipients. The results of live kidney donation have been excellent for donor and recipient, and there is a trend towards inclusion of older donors. Future strategies, including personalized immunosuppression for older recipients as well as machine preservation and reconditioning of donor organs, are promising ways to improve the outcome of transplantation between older donors and older recipients. Kidney and liver transplantation in the elderly is a clinical reality. Outcomes are good, but can be optimized by using strategies that modify donor risk factors and recipient co-morbidities, and personalized approaches to organ allocation and immunosuppression. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Profiling inflammation and tissue injury markers in perfusate and bronchoalveolar lavage fluid during human ex vivo lung perfusion.

PubMed

Andreasson, Anders S I; Karamanou, Danai M; Gillespie, Colin S; Özalp, Faruk; Butt, Tanveer; Hill, Paul; Jiwa, Kasim; Walden, Hannah R; Green, Nicola J; Borthwick, Lee A; Clark, Stephen C; Pauli, Henning; Gould, Kate F; Corris, Paul A; Ali, Simi; Dark, John H; Fisher, Andrew J

2017-03-01

Availability of donor lungs suitable for transplant falls short of current demand and contributes to waiting list mortality. Ex vivo lung perfusion (EVLP) offers the opportunity to objectively assess and recondition organs unsuitable for immediate transplant. Identifying robust biomarkers that can stratify donor lungs during EVLP to use or non-use or for specific interventions could further improve its clinical impact. In this pilot study, 16 consecutive donor lungs unsuitable for immediate transplant were assessed by EVLP. Key inflammatory mediators and tissue injury markers were measured in serial perfusate samples collected hourly and in bronchoalveolar lavage fluid (BALF) collected before and after EVLP. Levels were compared between donor lungs that met criteria for transplant and those that did not. Seven of the 16 donor lungs (44%) improved during EVLP and were transplanted with uniformly good outcomes. Tissue and vascular injury markers lactate dehydrogenase, HMGB-1 and Syndecan-1 were significantly lower in perfusate from transplanted lungs. A model combining IL-1β and IL-8 concentrations in perfusate could predict final EVLP outcome after 2 h assessment. In addition, perfusate IL-1β concentrations showed an inverse correlation to recipient oxygenation 24 h post-transplant. This study confirms the feasibility of using inflammation and tissue injury markers in perfusate and BALF to identify donor lungs most likely to improve for successful transplant during clinical EVLP. These results support examining this issue in a larger study. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery.

Higher Drop in Speed during a Repeated Sprint Test in Soccer Players Reporting Former Hamstring Strain Injury

PubMed Central

Røksund, Ola D.; Kristoffersen, Morten; Bogen, Bård E.; Wisnes, Alexander; Engeseth, Merete S.; Nilsen, Ann-Kristin; Iversen, Vegard V.; Mæland, Silje; Gundersen, Hilde

2017-01-01

Aim: Hamstring strain injury is common in soccer. The aim of this study was to evaluate the physical capacity of players who have and have not suffered from hamstring strain injury in a sample of semi-professional and professional Norwegian soccer players in order to evaluate characteristics and to identify possible indications of insufficient rehabilitation. Method: Seventy-five semi-professional and professional soccer players (19 ± 3 years) playing at the second and third level in the Norwegian league participated in the study. All players answered a questionnaire, including one question about hamstring strain injury (yes/no) during the previous 2 years. They also performed a 40 m maximal sprint test, a repeated sprint test (8 × 20 m), a countermovement jump, a maximal oxygen consumption (VO2max) test, strength tests and flexibility tests. Independent sample t-tests were used to evaluate differences in the physical capacity of the players who had suffered from hamstring strain injury and those who had not. Mixed between-within subject's analyses of variance was used to compare changes in speed during the repeated sprint test between groups. Results: Players who reported hamstring strain injury during the previous two years (16%) had a significantly higher drop in speed (0.07 vs. 0.02 s, p = 0.007) during the repeated sprint test, compared to players reporting no previous hamstring strain injury. In addition, there was a significant interaction (groups × time) (F = 3.22, p = 0.002), showing that speed in the two groups changed differently during the repeated sprint test. There were no significant differences in relations to age, weight, height, body fat, linear speed, countermovement jump height, leg strength, VO2max, or hamstring flexibility between the groups. Conclusion: Soccer players who reported hamstring strain injury during the previous 2 years showed significant higher drop in speed during the repeated sprint test compared to players with no hamstring strain injury. The maximal speed, leg strength, ability to produce maximal power, endurance capacity, and hamstring flexibility was similar for both groups. Thus, a repeated sprint test consisting of 8 × 20 m could be used as a field-based diagnostic tool to identify players in need of reconditioning programs to ensure complete post-injury rehabilitation. PMID:28190999

Effects of bright light exposure on human fear conditioning, extinction, and associated prefrontal activation.

PubMed

Yoshiike, Takuya; Honma, Motoyasu; Yamada, Naoto; Kim, Yoshiharu; Kuriyama, Kenichi

2018-06-18

Bright light (BL) not only regulates human emotion and circadian physiology but can also directly modulate emotional memories. Impaired fear extinction and enhanced fear acquisition and consolidation are hallmarks of fear-circuitry disorders; thus, we tested whether BL facilitates fear extinction and inhibits fear acquisition. We randomly exposed 29 healthy humans to high- (9000 lx) or low-intensity light (<500 lx) for 15 min, near the nadir of the phase response to light, in a single-blind manner. Simultaneously with the light exposure, subjects performed fear extinction training and second fear acquisition, where a visual conditioned stimulus (CS), previously paired with an electric shock unconditioned stimulus (US), was presented without the US, while another CS was newly paired with the US. Conditioned responses (CRs) and changes in prefrontal cortex (PFC) activity were determined during encoding and delayed recall sessions. BL-exposed subjects exhibited lower extinction-related PFC activity and marginally higher acquisition-related PFC activity during light exposure than subjects exposed to control light. Twenty-four hours later, BL reduced CRs to both the extinguished and non-extinguished CSs with marginally lower extinction-related PFC activation, suggesting that BL enhanced fear extinction, while suppressing fear acquisition. Further, BL sustained tolerance to fear re-conditioning. Our results demonstrate that a single and brief BL exposure, synchronized with fear extinction and acquisition, instantaneously influences prefrontal hemodynamic responses and alleviates fear expression after 24 h. Although the specificity of BL effects deems further investigation, our findings indicate the clinical relevance of adjunctive BL intervention in exposure-based cognitive-behavioral therapy for fear-circuitry disorders. Copyright © 2018 Elsevier Inc. All rights reserved.

Honey bees (Apis mellifera) as explosives detectors: exploring proboscis extension reflex conditioned response to trinitrotolulene (TNT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor-mccabe, Kirsten J; Wingo, Robert M; Haarmann, Timothy K

We examined honey bee's associative learning response to conditioning with trinitrotolulene (TNT) vapor concentrations generated at three temperatures and their ability to be reconditioned after a 24 h period. We used classical conditioning of the proboscis extension (PER) in honey bees using TNT vapors as the conditioned stimulus and sucrose as the unconditioned stimulus. We conducted fifteen experimental trials with an explosives vapor generator set at 43 C, 25 C and 5 C, producing three concentrations of explosives (1070 ppt, 57 ppt, and 11 ppt). Our objective was to test the honey bee's ability to exhibit a conditioned response tomore » TNT vapors at all three concentrations by comparing the mean percentage of honey bees successfully exhibiting a conditioned response within each temperature group. Furthermore, we conducted eight experimental trials to test the honey bee's ability to retain their ability to exhibit a conditioned response to TNT after 24h period by comparing the mean percentage of honey bees with a conditioned response TNT on the first day compared to the percentage of honey bees with a conditioned response to TNT on the second day. Results indicate that there was no significant difference between the mean percentage of honey bees with a conditioned response to TNT vapors between three temperature groups. There was a significant difference between the percentage of honey bees exhibiting conditioned response on the first day of training compared to the percentage of honey bees exhibiting conditioned response 24 h after training. Our experimental results indicate that honey bees can be trained to exhibit a conditioned response to a range of TNT concentrations via PER However, it appears that the honey bee's ability to retain the conditioned response to TNT vapors after 24h significantly decreases.« less

Mild asthma and chronic bronchitis seem to influence functional exercise capacity: a multi-case control study.

PubMed

Marcon, Alessandro; Girardi, Paolo; Ferrari, Marcello; Olivieri, Mario; Accordini, Simone; Bombieri, Cristina; Bortolami, Oscar; Braggion, Marco; Cappa, Veronica; Cazzoletti, Lucia; Locatelli, Francesca; Nicolis, Morena; Perbellini, Luigi; Sembeni, Silvia; Verlato, Giuseppe; Zanolin, Maria Elisabetta; de Marco, Roberto

2013-01-01

In the Genes Environment Interaction in Respiratory Diseases population-based multi-case control study, we investigated whether asthma, chronic bronchitis (CB) and rhinitis were associated with a reduced 6-minute walk distance (6MWD), and whether the 6MWD determinants were similar for subjects with/without respiratory diseases. Cases of asthma (n = 360), CB (n = 120), rhinitis (n = 203) and controls (no respiratory diseases: n = 302) were recruited. The variation in the 6MWD across the groups was analyzed by ANCOVA, adjusting for gender, age, height, weight and comorbidity. The 6MWD determinants were studied by linear regression, and heterogeneity across the cases and controls was investigated. The 6MWD differed across cases and controls (p = 0.01). It was shorter for cases of asthma (-17.1, 95% CI -28.3 to -5.8 m) and CB (-20.7, 95% CI: -36.6 to -4.8 m) than for controls (604 ± 68 m on average), but not for cases of rhinitis. The negative association between age and the 6MWD was significant for cases of CB, but not for the other groups (p = 0.001). Even at the level of severity found in the general population, asthma and CB could influence the 6MWD, which seems to reflect the functional exercise level for daily physical activities. The negative association between ageing and the 6MWD was particularly strong in subjects with CB. Our report adds to the mounting evidence that CB is not a trivial condition, especially in the ageing adult population, and it supports the importance of monitoring functional capacity and of physical reconditioning in mild asthma. Copyright © 2013 S. Karger AG, Basel.

Acute effects of static and dynamic stretching on jump performance after 15 min of reconditioning shooting phase in basketball players.

PubMed

Annino, Giuseppe; Ruscello, Bruno; Lebone, Pietro; Palazzo, Francesco; Lombardo, Mauro; Padua, Elvira; Verdecchia, Luca; Tancredi, Virginia; Iellamo, Ferdinando

2017-04-01

The aim of this study was to assess the effects of static (SS) and dynamic stretching (DS) on vertical jump performance executed before, immediately after and at the end of the shooting phase (i.e., 15 min later), as to simulate the actual conditions preceding a match, in professional basketball players. Ten elite basketball players (age: 29±6.73 years, height: 194.67±7.75 cm, weight: 91±8.17 kg and BMI 23.8±7.91 kg.m-2) participated to the study. SS and DS protocols were administered during the first training session of the week, 48 hours after the championship match. Stretching protocols consisted in ~7 minutes of general warm-up phase followed by ~8 minutes of SS and DS, performed with a cross-over design., and ~15 minutes of a specific warm-up shooting phase (SP). Vertical jump tests consisted in counter movement jump (CMJ) and CMJ with arm swings (CMJas) and were performed immediately after the end of each stretching phase (preS, postS, postSP). A significant decrease (P=0.05; η2partial=0.29) in jumping tests height occurred in CMJas, when performed after the SS (i.e., PostS). However, no significant differences in jumping performances, occurred after the general warm phase and the specific warm-up shooting phase, between the two stretching protocols. These results would indicate that, overall, stretching routines either dynamic or static, performed before a basketball match are transient and affect only marginally leg muscles performance. Stretching routines, particularly the dynamic ones, may be useful to maintain muscle performance before a competition, provided that this latter begins shortly after.

Organotypic lung culture: A new model for studying ischemia and ex vivo perfusion in lung transplantation.

PubMed

Baste, Jean-Marc; Gay, Arnaud; Smail, Hassiba; Noël, Romain; Bubenheim, Michael; Begueret, Hugues; Morin, Jean-Paul; Litzler, Pierre-Yves

2015-01-01

Donors after cardiac death (DCD) in lung transplantation is considered as a solution for organ shortage. However, it is characterized by warm ischemic period, which could be involved in severe Ischemia-Reperfusion lesion (IR) with early graft dysfunction. We describe a new hybrid model combining in vivo ischemia followed by in vitro reoxygenation using organ-specific culture. A hybrid model using in vivo ischemic period followed by in vitro lung slice reoxygenation was set up in rat to mimic DCD in lung transplantation with in vitro perfusion. Different markers (bioenergetics, oxidant stress assays, and histology) were measured to evaluate the viability of lung tissue after different ischemic times (I-0, I-1, I-2, I-4, I-15 hours) and reoxygenation times (R-0, R-1, R-4, R-24 hours). No differences were found in cell viability, ATP concentrations, extracellular LDH assays or histology, demonstrating extensive viability of up to 4 hours in lung tissue warm ischemia. We found oxidative stress mainly during the ischemic period with no burst at reoxygenation. Cytosolic anti-oxidant system was involved first (I-0,I-1,I-2) followed by mitochondrial anti-oxidant system for extensive ischemia (I-4). Histological features showed differences in this model of ischemia-reoxygenation between bronchial epithelium and lung parenchymal cells, with epithelium regeneration after 2 hours of warm ischemia and 24 hours of perfusion. The results of our hybrid model experiment suggest extensive lung viability of up to 4 hours ischemia. Our model could be an interesting tool to evaluate ex vivo reconditioning techniques after different in vivo lung insults.

Education and home based training for intermittent claudication: functional effects and quality of life.

PubMed

Prévost, Alain; Lafitte, Marianne; Pucheu, Yann; Couffinhal, Thierry

2015-03-01

Supervised exercise programs increase physical performance in patients with peripheral artery disease (PAD). However, there are a limited number of programs, and to date they have failed to provide evidence of long-term adherence to exercise or any meaningful effect on Quality of Life (QoL). We created a program of therapeutic education and a personalized program of reconditioning exercise for patients with PAD. Patients with an ankle-brachial index (ABI) below 0.9 in at least one limb, and an absolute claudication distance (ACD) ≤500 meters, were included in the study. Quality of Life (QoL) as measured by SF-36, cardiovascular risk factors and functional parameters were evaluated at 0, 3, 6 and 12 months. Forty-six patients completed the program. Cardiovascular risks were controlled and stabilized over time. SF-36 scores improved significantly and remained stable. Initial and absolute claudication distance (ICD and ACD) as well as other functional parameters improved significantly (6 months: +138 m or +203% ICD and +139 m or +84% ACD). Ten patients (22%) did not show improvement in ICD or ACD within the first 3 months, but their SF-36 score did increase at subsequent visits. Interestingly, these patients had a significantly lower ACD at baseline. This study measured beneficial effects of an educational therapeutic program for patients with PAD. The results demonstrate a significant improvement in functional and QoL parameters during the first 3 months of coaching, and long-term persistence of the results even when patients were no longer coached. © The European Society of Cardiology 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Molecular mechanisms underlying the physiological responses of the cold-water coral Desmophyllum dianthus to ocean acidification

NASA Astrophysics Data System (ADS)

Carreiro-Silva, M.; Cerqueira, T.; Godinho, A.; Caetano, M.; Santos, R. S.; Bettencourt, R.

2014-06-01

Cold-water corals (CWCs) are thought to be particularly vulnerable to ocean acidification (OA) due to increased atmospheric pCO2, because they inhabit deep and cold waters where the aragonite saturation state is naturally low. Several recent studies have evaluated the impact of OA on organism-level physiological processes such as calcification and respiration. However, no studies to date have looked at the impact at the molecular level of gene expression. Here, we report results of a long-term, 8-month experiment to compare the physiological responses of the CWC Desmophyllum dianthus to OA at both the organismal and gene expression levels under two pCO2/pH treatments: ambient pCO2 (460 μatm, pHT = 8.01) and elevated pCO2 (997 μatm, pHT = 7.70). At the organismal level, no significant differences were detected in the calcification and respiration rates of D. dianthus. Conversely, significant differences were recorded in gene expression profiles, which showed an up-regulation of genes involved in cellular stress (HSP70) and immune defence (mannose-binding c-type lectin). Expression of alpha-carbonic anhydrase, a key enzyme involved in the synthesis of coral skeleton, was also significantly up-regulated in corals under elevated pCO2, indicating that D. dianthus was under physiological reconditioning to calcify under these conditions. Thus, gene expression profiles revealed physiological impacts that were not evident at the organismal level. Consequently, understanding the molecular mechanisms behind the physiological processes involved in a coral's response to elevated pCO2 is critical to assess the ability of CWCs to acclimate or adapt to future OA conditions.

P/N In(Al) GaAs multijunction laser power converters

NASA Technical Reports Server (NTRS)

Wojtczuk, Steven; Parados, Themis; Walker, Gilbert

1994-01-01

Eight In(AI)GaAs PN junctions grown epitaxially on the semi-insulating wafer were monolithically integrated in series to boost the approximately 0.4V photovoltage per typical In(Al)GaAs junction to over 3 volts for the 1 sq cm laser power converted (LPC) chip. Advantages of multijunction LCP designs include the need for less circuitry for power reconditioning and the potential for lower I(sup 2)R power loss. As an example, these LPC's have a responsivity of approximately 1 amp/watt. With a single junction LPC, 100 watts/sq cm incident power would lead to about 100 A/sq cm short-circuit current at approximately 0.4V open-cicuit voltage. One disadvantage is the large current would lead to a large I(sup 2)R loss which would lower the fill factor so that 40 watts/sq cm output would not be obtained. Another is that few circuits are designed to work at 0.4 volts, so DC-DC power conversion circuitry would be necessary to raise the voltage to a reasonable level. The multijunction LPC being developed in this program is a step toward solving these problems. In the above example, an eight-junction LPC would have eight times the voltage, approximately 3V, so that DC-DC power conversion may not be needed in many instances. In addition, the multijunction LPC would have 1/8 the current of a single-junction LPC, for only 1/64 the I(sup 2)R loss if the series resistance is the same. Working monolithic multijunction laser power converters (LPC's) were made in two different compositions of the In(x)Al(y)Ga(1-x-y)As semiconductor alloy, In(0.53)Ga(0.47)As (0.74 eV) and In(0.5)Al(0.1)Ga(0.4)As (0.87 eV). The final 0.8 sq cm LPC's had output voltages of about 3 volts and output currents up to about one-half amp. Maximum 1.3 micron power conversion efficiencies were approximately 22 percent. One key advantage of multijunction LPC's is that they have higher output voltages, so that less DC-DC power conversion circuitry is needed in applications.

Current Concepts in Sports Injury Rehabilitation

PubMed Central

Dhillon, Himmat; Dhilllon, Sidak; Dhillon, Mandeep S

2017-01-01

In the modern era, rehabilitation after sports injury has become a domain for specialists, and its evolution has necessarily brought together the sports physiotherapist, the sports physician, and the orthopedic surgeon. The changing profile of sports related injury, as well as limited availability of facilities for rehabilitation in many areas of India, is a matter of concern. Elite sportspersons have some protection, but the average athlete is often left to fend for himself. Key factors in successful sports injury rehabilitation protocols are the application of modern rehabilitation protocols under appropriate supervision, appropriate and well timed surgical interventions, and judicious and need based use of pharmaceutical agents. Modern rehabilitation protocols emphasize teamwork and proper rehabilitation planning, and the rehabilitation team has to be lead by a trained sports physiotherapist, with an understanding of the protocols and interventions required at various stages. Injury specific rehabilitation protocols are being practiced worldwide but need to be introduced according to the nature of the sport as well as available facilities. Even in India, sports physicians are increasingly joining specialist rehabilitation teams, and they can help with medication, nutritional supplements, and specialized tests that could improve injury understanding. Inputs from surgeons are mandatory if surgical interventions have been performed. What is often missing in the underdeveloped world is psychological support and a clear understanding by the athlete of his/her rehabilitation protocols. World over, the primary aims are safe return to sports and minimizing reinjury on return to sport; this involves rehabilitation in stages, and current methodology clearly demarcates acute and chronic phases of injury. Close coordination with trainers and coaches is mandatory, and all need to understand that the reconditioning phase is crucial; skill assessment before progression has now become a specialized domain and needs to be introduced at all levels of the sport. A key factor in all sports injury rehabilitation protocols is injury prevention; this involves data maintenance by teams or trainers, which is still not fully developed in the Indian context. The injury and subsequent problems need to be comprehended both by athletes and their coaches. The current review is an attempt to clarify some of the issues that are important and routinely used world over, with the aim to improving rehabilitation after sports even in the underdeveloped world. PMID:28966376

Respiratory Health - Exposure Measurements and Modeling in the Fragrance and Flavour Industry.

PubMed

Angelini, Eric; Camerini, Gerard; Diop, Malick; Roche, Patrice; Rodi, Thomas; Schippa, Christine; Thomas, Thierry

2016-01-01

Although the flavor and fragrance industry is about 150 years old, the use of synthetic materials started more than 100 years ago, and the awareness of the respiratory hazard presented by some flavoring substances emerged only recently. In 2001, the US National Institute of Occupational Safety and Health (NIOSH) identified for the first time inhalation exposure to flavoring substances in the workplace as a possible occupational hazard. As a consequence, manufacturers must comply with a variety of workplace safety requirements, and management has to ensure the improvement of health and safety of the employees exposed to hazardous volatile organic compounds. In this sensitive context, MANE opened its facilities to an intensive measuring campaign with the objective to better estimate the real level of hazardous respiratory exposure of workers. In this study, exposure to 27 hazardous volatile substances were measured during several types of handling operations (weighing-mixing, packaging, reconditioning-transferring), 430 measurement results were generated, and were exploited to propose an improved model derived from the well-known ECETOC-TRA model. The quantification of volatile substances in the working atmosphere involved three main steps: adsorption of the chemicals on a solid support, thermal desorption, followed by analysis by gas chromatography-mass spectrometry. Our approach was to examine experimental measures done in various manufacturing workplaces and to define correction factors to reflect more accurately working conditions and habits. Four correction factors were adjusted in the ECETOC-TRA to integrate important exposure variation factors: exposure duration, percentage of the substance in the composition, presence of collective protective equipment and wearing of personal protective equipment. Verification of the validity of the model is based on the comparison of the values obtained after adaptation of the ECETOC-TRA model, according to various exposure scenarios, with the experimental values measured under real conditions. After examination of the predicted results, 98% of the values obtained with the proposed new model were above the experimental values measured in real conditions. This must be compared with the results of the classical ECETOC-TRA system, which generates only 37% of overestimated values. As the values generated by the new model intended to help decision-makers of the industry to implement adapted protective action and information, and considering the high variability of the working environments, it was of the utmost importance to us not to underestimate the exposure level. The proposed correction factors have been designed to achieve this goal. We wish to propose the present method as an improved monitoring tool to improve respiratory health and safety in the flavor and fragrance manufacturing facilities.

Extracellular Vesicles from Human Liver Stem Cells Reduce Injury in an Ex Vivo Normothermic Hypoxic Rat Liver Perfusion Model.

PubMed

Rigo, Federica; De Stefano, Nicola; Navarro-Tableros, Victor; David, Ezio; Rizza, Giorgia; Catalano, Giorgia; Gilbo, Nicholas; Maione, Francesca; Gonella, Federica; Roggio, Dorotea; Martini, Silvia; Patrono, Damiano; Salizzoni, Mauro; Camussi, Giovanni; Romagnoli, Renato

2018-05-01

The gold standard for organ preservation before transplantation is static cold storage, which is unable to fully protect suboptimal livers from ischemia/reperfusion injury. An emerging alternative is normothermic machine perfusion (NMP), which permits organ reconditioning. Here, we aimed to explore the feasibility of a pharmacological intervention on isolated rat livers by using a combination of NMP and human liver stem cells-derived extracellular vesicles (HLSC-EV). We established an ex vivo murine model of NMP capable to maintain liver function despite an ongoing hypoxic injury induced by hemodilution. Livers were perfused for 4 hours without (control group, n = 10) or with HLSC-EV (treated group, n = 9). Bile production was quantified; perfusate samples were collected hourly to measure metabolic (pH, pO2, pCO2) and cytolysis parameters (AST, alanine aminotransferase, lactate dehydrogenase). At the end of perfusion, we assessed HLSC-EV engraftment by immunofluorescence, tissue injury by histology, apoptosis by terminal deoxynucleotidyl transferase dUTP nick-end labeling assay, tissue hypoxia-inducible factor 1-α, and transforming growth factor-beta 1 RNA expression by quantitative reverse transcription-polymerase chain reaction. During hypoxic NMP, livers were able to maintain homeostasis and produce bile. In the treated group, AST (P = 0.018) and lactate dehydrogenase (P = 0.032) levels were significantly lower than those of the control group at 3 hours of perfusion, and AST levels persisted lower at 4 hours (P = 0.003). By the end of NMP, HLSC-EV had been uptaken by hepatocytes, and EV treatment significantly reduced histological damage (P = 0.030), apoptosis (P = 0.049), and RNA overexpression of hypoxia-inducible factor 1-α (P < 0.0001) and transforming growth factor-beta 1 (P = 0.014). HLSC-EV treatment, even in a short-duration model, was feasible and effectively reduced liver injury during hypoxic NMP.

Combined tool approach is 100% successful for emergency football face mask removal.

PubMed

Copeland, Aaron J; Decoster, Laura C; Swartz, Erik E; Gattie, Eric R; Gale, Stephanie D

2007-11-01

To compare effectiveness of two techniques for removing football face masks: cutting loop straps [cutting tool: FMXtractor (FMX)] or removing screws with a cordless screwdriver and using the FMXtractor as needed for failed removals [combined tool (CT)]. Null hypotheses: no differences in face mask removal success, removal time or difficulty between techniques or helmet characteristics. Retrospective, cross-sectional. NOCSAE-certified helmet reconditioning plants. 600 used high school helmets. Face mask removal attempted with two techniques. Success, removal time, rating of perceived exertion (RPE). Both techniques were effective [CT 100% (300/300); FMX 99.4% (298/300)]. Use of the backup FMXtractor in CT trials was required in 19% of trials. There was significantly (P<0.001) less call for the backup tool in helmets with silver screws (6%) than in helmets with other screws (31%). Mean removal time was 44.51+/-18.79s (CT: 37.84+/-15.37s, FMX: 51.21+/-19.54s; P<0.001). RPE was different between techniques (CT: 1.83+/-1.20, FMX: 3.11+/-1.27; P<0.001). Removal from helmets with silver screws was faster (Silver=33.38+/-11.03, Others=42.18+/-17.64; P<0.001) and easier (Silver=1.42+/-0.89, Other=2.23+/-1.33; P<0.001). CT was faster and easier than FMX. Most CT trials were completed with the screwdriver alone; helmets with silver screws had 94% screwdriver success. Clinically, these findings are important because this and other research shows that compared to removal with cutting tools, screwdriver removal decreases time, difficulty and helmet movement (reducing potential for iatrogenic injury). The combined-tool approach captures benefits of the screwdriver while offering a contingency for screw removal failure. Teams should use degradation-resistant screws. Sports medicine professionals must be prepared with appropriate tools and techniques to efficiently remove the face mask from an injured football player's helmet.

Accuracy of topographic index models at identifying ephemeral gully trajectories on agricultural fields

NASA Astrophysics Data System (ADS)

Sheshukov, Aleksey Y.; Sekaluvu, Lawrence; Hutchinson, Stacy L.

2018-04-01

Topographic index (TI) models have been widely used to predict trajectories and initiation points of ephemeral gullies (EGs) in agricultural landscapes. Prediction of EGs strongly relies on the selected value of critical TI threshold, and the accuracy depends on topographic features, agricultural management, and datasets of observed EGs. This study statistically evaluated the predictions by TI models in two paired watersheds in Central Kansas that had different levels of structural disturbances due to implemented conservation practices. Four TI models with sole dependency on topographic factors of slope, contributing area, and planform curvature were used in this study. The observed EGs were obtained by field reconnaissance and through the process of hydrological reconditioning of digital elevation models (DEMs). The Kernel Density Estimation analysis was used to evaluate TI distribution within a 10-m buffer of the observed EG trajectories. The EG occurrence within catchments was analyzed using kappa statistics of the error matrix approach, while the lengths of predicted EGs were compared with the observed dataset using the Nash-Sutcliffe Efficiency (NSE) statistics. The TI frequency analysis produced bi-modal distribution of topographic indexes with the pixels within the EG trajectory having a higher peak. The graphs of kappa and NSE versus critical TI threshold showed similar profile for all four TI models and both watersheds with the maximum value representing the best comparison with the observed data. The Compound Topographic Index (CTI) model presented the overall best accuracy with NSE of 0.55 and kappa of 0.32. The statistics for the disturbed watershed showed higher best critical TI threshold values than for the undisturbed watershed. Structural conservation practices implemented in the disturbed watershed reduced ephemeral channels in headwater catchments, thus producing less variability in catchments with EGs. The variation in critical thresholds for all TI models suggested that TI models tend to predict EG occurrence and length over a range of thresholds rather than find a single best value.

New Approaches to Waterproofing of Space Shuttle Insulating Materials

NASA Technical Reports Server (NTRS)

Blum, Yigal D.; Johnson, Sylvia M.; Chen, Paul

1997-01-01

Future reusable space vehicles will be in service much more frequently than current space shuttles. Therefore, rapid reconditioning of spacecraft will be required. Currently, the waterproofing of space shuttles after each re-entry takes 72 hours and requires substantial labor. In addition, the currently used waterproofing reagent, DiMethylEthoxySilane (DMES), is considered toxic, and ethanol fumes are released during its hydrolytic activation. Consequently, a long time period, which is not acceptable for future operations, is needed to ensure that 0 the excess volatile compounds are removed before further maintenance of the space vehicle can be performed. The objective of this project was to assist NASA Ames in finding improved waterproofing systems by identifying suitable waterproofing agents that can be applied by vapor phase deposition and will be less toxic, bond more rapidly to the insulation material surface, and potentially have higher thermal stability than the DMES system. Several approaches to achieve faster waterproofing with less toxicity were assessed using the following alternatives: Reactive volatile compounds that are rapidly deposited by chemical bonding at the surface and leave no toxic volatiles. Reactive reagents that are the least toxic. Nonvolatile reagents that are very reactive and bond strongly to the insulating material surface. Three specific types of potential reagents were chosen for evaluation in this project: 1. Volatile reagents with Si-Cl functional groups for vapor deposition 2. Volatile reagents with Si-H functional groups for vapor deposition 3. Nonvolatile oligomeric or polymeric reactive siloxanes that are assumed to have higher thermal stability and/or strong bonding to the insulating material. The chemistry involved in the project was targeted at the generation of intermediates having reactive Si-OH bonds for the formation of either volatile species or polymeric species that bond rapidly to the surface and also cure rapidly. We focused on two chemical reactions@-hydrolysis of Si-Cl bonds and catalytic dehydrocoupling of Si-H bonds.

Renal Resistance Trend During Hypothermic Machine Perfusion Is More Predictive of Postoperative Outcome Than Biopsy Score: Preliminary Experience in 35 Consecutive Kidney Transplantations.

PubMed

Bissolati, Massimiliano; Gazzetta, Paolo Giovanni; Caldara, Rossana; Guarneri, Giovanni; Adamenko, Olga; Giannone, Fabio; Mazza, Michele; Maggi, Giulia; Tomanin, Deborah; Rosati, Riccardo; Secchi, Antonio; Socci, Carlo

2018-03-30

Hypothermic machine perfusion (HPM) grants a better postoperative outcome in transplantation of organs procured from extended criteria donors (ECDs) and donors after cardiac death (DCD). So far, the only available parameter for outcome prediction concerning those organs is pretransplant biopsy score. The aim of this study is to evaluate whether renal resistance (RR) trend during HPM may be used as a predictive marker for post-transplantation outcome. From December 2015 to present, HMP has been systematically applied to all organs from ECDs and DCD. All grafts underwent pretransplantation biopsy evaluation using Karpinski's histological score. Only organs that reached RR value ≤1.0 within 3 hours of perfusion were transplanted. Single kidney transplantation (SKT) or double kidney transplantation (DKT) were performed according to biopsy score results. Sixty-five HMPs were performed (58 from ECDs and 7 from DCD/ECMO donors). Fifteen kidneys were insufficiently reconditioned (RR > 1) and were therefore discarded. Forty-nine kidneys were transplanted, divided between 21 SKT and 14 DKT. Overall primary nonfunction (PNF) and delayed graft function (DGF) rate were 2.9 and 17.1%, respectively. DGF were more common in kidneys from DCD (67 vs. 7%; P = 0.004). Biopsy score did not correlate with PNF/DGF rate (P = 0.870) and postoperative creatinine trend (P = 0.796). Recipients of kidneys that reached RR ≤ 1.0 within 1 hour of HMP had a lower PNF/DGF rate (11 vs. 44%; P = 0.033) and faster serum creatinine decrease (POD10 creatinine: 1.79 mg/dL vs. 4.33 mg/dL; P = 0.019). RR trend is more predictive of post-transplantation outcome than biopsy score. Hence, RR trend should be taken into account in the pretransplantation evaluation of the organs. © 2018 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Forecast-based Integrated Flood Detection System for Emergency Response and Disaster Risk Reduction (Flood-FINDER)

NASA Astrophysics Data System (ADS)

Arcorace, Mauro; Silvestro, Francesco; Rudari, Roberto; Boni, Giorgio; Dell'Oro, Luca; Bjorgo, Einar

2016-04-01

Most flood prone areas in the globe are mainly located in developing countries where making communities more flood resilient is a priority. Despite different flood forecasting initiatives are now available from academia and research centers, what is often missing is the connection between the timely hazard detection and the community response to warnings. In order to bridge the gap between science and decision makers, UN agencies play a key role on the dissemination of information in the field and on capacity-building to local governments. In this context, having a reliable global early warning system in the UN would concretely improve existing in house capacities for Humanitarian Response and the Disaster Risk Reduction. For those reasons, UNITAR-UNOSAT has developed together with USGS and CIMA Foundation a Global Flood EWS called "Flood-FINDER". The Flood-FINDER system is a modelling chain which includes meteorological, hydrological and hydraulic models that are accurately linked to enable the production of warnings and forecast inundation scenarios up to three weeks in advance. The system is forced with global satellite derived precipitation products and Numerical Weather Prediction outputs. The modelling chain is based on the "Continuum" hydrological model and risk assessments produced for GAR2015. In combination with existing hydraulically reconditioned SRTM data and 1D hydraulic models, flood scenarios are derived at multiple scales and resolutions. Climate and flood data are shared through a Web GIS integrated platform. First validation of the modelling chain has been conducted through a flood hindcasting test case, over the Chao Phraya river basin in Thailand, using multi temporal satellite-based analysis derived for the exceptional flood event of 2011. In terms of humanitarian relief operations, the EO-based services of flood mapping in rush mode generally suffer from delays caused by the time required for their activation, programming, acquisitions and image processing. Flood-FINDER aims to pre-empt this process and to provide preliminary analyses where no field data is available. In the early 2015, the Flood-FINDER's forecast along the Shire River has been used to guide the rapid mapping activities in Southern Malawi and Northern Mozambique. It proved efficient support providing timely information about the evolution of the flood event over an area lacking of field data. Regarding in-country capacity building, Flood-FINDER allowed UNOSAT to set up in middle 2015 a flood early warning system in Chad along the Chari River basin with the collaboration of Chadian Ministry of hydraulics and livestock. Weekly flood bulletins have been shared with local authorities and UN agencies over the entire rainy season. Finally, an experimental version of the global web alerting platform has been recently developed for supporting the El Nino flood preparedness in the Horn of Africa. Flood-FINDEŔs mission is to support decision makers throughout all the disaster management cycle with flood alerts, modelled scenarios, EO-based impact assessments and with direct support at country level to implement disaster mitigation strategies. The aim for the future is to seek funding for having the global system fully operational using CERN's supercomputing facilities and to establish new in-country projects with local authorities.

Respiratory Health – Exposure Measurements and Modeling in the Fragrance and Flavour Industry

PubMed Central

Angelini, Eric; Camerini, Gerard; Diop, Malick; Roche, Patrice; Rodi, Thomas; Schippa, Christine; Thomas, Thierry

2016-01-01

Although the flavor and fragrance industry is about 150 years old, the use of synthetic materials started more than 100 years ago, and the awareness of the respiratory hazard presented by some flavoring substances emerged only recently. In 2001, the US National Institute of Occupational Safety and Health (NIOSH) identified for the first time inhalation exposure to flavoring substances in the workplace as a possible occupational hazard. As a consequence, manufacturers must comply with a variety of workplace safety requirements, and management has to ensure the improvement of health and safety of the employees exposed to hazardous volatile organic compounds. In this sensitive context, MANE opened its facilities to an intensive measuring campaign with the objective to better estimate the real level of hazardous respiratory exposure of workers. In this study, exposure to 27 hazardous volatile substances were measured during several types of handling operations (weighing-mixing, packaging, reconditioning-transferring), 430 measurement results were generated, and were exploited to propose an improved model derived from the well-known ECETOC-TRA model. The quantification of volatile substances in the working atmosphere involved three main steps: adsorption of the chemicals on a solid support, thermal desorption, followed by analysis by gas chromatography-mass spectrometry. Our approach was to examine experimental measures done in various manufacturing workplaces and to define correction factors to reflect more accurately working conditions and habits. Four correction factors were adjusted in the ECETOC-TRA to integrate important exposure variation factors: exposure duration, percentage of the substance in the composition, presence of collective protective equipment and wearing of personal protective equipment. Verification of the validity of the model is based on the comparison of the values obtained after adaptation of the ECETOC-TRA model, according to various exposure scenarios, with the experimental values measured under real conditions. After examination of the predicted results, 98% of the values obtained with the proposed new model were above the experimental values measured in real conditions. This must be compared with the results of the classical ECETOC-TRA system, which generates only 37% of overestimated values. As the values generated by the new model intended to help decision-makers of the industry to implement adapted protective action and information, and considering the high variability of the working environments, it was of the utmost importance to us not to underestimate the exposure level. The proposed correction factors have been designed to achieve this goal. We wish to propose the present method as an improved monitoring tool to improve respiratory health and safety in the flavor and fragrance manufacturing facilities. PMID:26863607

NASA Human System Risk Assessment Process

NASA Technical Reports Server (NTRS)

Francisco, D.; Romero, E.

2016-01-01

NASA utilizes an evidence based system to perform risk assessments for the human system for spaceflight missions. The center of this process is the multi-disciplinary Human System Risk Board (HSRB). The HSRB is chartered from the Chief Health and Medical Officer (OCHMO) at NASA Headquarters. The HSRB reviews all human system risks via an established comprehensive risk and configuration management plan based on a project management approach. The HSRB facilitates the integration of human research (terrestrial and spaceflight), medical operations, occupational surveillance, systems engineering and many other disciplines in a comprehensive review of human system risks. The HSRB considers all factors that influence human risk. These factors include pre-mission considerations such as screening criteria, training, age, sex, and physiological condition. In mission factors such as available countermeasures, mission duration and location and post mission factors such as time to return to baseline (reconditioning), post mission health screening, and available treatments. All of the factors influence the total risk assessment for each human risk. The HSRB performed a comprehensive review of all potential inflight medical conditions and events and over the course of several reviews consolidated the number of human system risks to 30, where the greatest emphasis is placed for investing program dollars for risk mitigation. The HSRB considers all available evidence from human research and, medical operations and occupational surveillance in assessing the risks for appropriate mitigation and future work. All applicable DRMs (low earth orbit for 6 and 12 months, deep space for 30 days and 1 year, a lunar mission for 1 year, and a planetary mission for 3 years) are considered as human system risks are modified by the hazards associated with space flight such as microgravity, exposure to radiation, distance from the earth, isolation and a closed environment. Each risk has a summary two-page assessment representing the state of knowledge/evidence of that risk, available risk mitigations, traceability to the Space Flight Human System Standards (SFHSS) and program requirements, and future work required. These data then can drive coordinated budgets across the Human Research Program, the International Space Station, Crew Health and Safety and Advanced Exploration System budgets to provide the most economical and timely mitigations. The risk assessments were completed for the 6 DRMs and serve as the baseline for which subsequent research and technology development and crew health care portfolios can be assessed. The HSRB reviews each risk at least annually or when new evidence/information is available that adds to the body of evidence. The current status of each risk can be reported to program management for operations, budget reviews and general oversight of the human system risk management program.

Exercise in space: the European Space Agency approach to in-flight exercise countermeasures for long-duration missions on ISS.

PubMed

Petersen, Nora; Jaekel, Patrick; Rosenberger, Andre; Weber, Tobias; Scott, Jonathan; Castrucci, Filippo; Lambrecht, Gunda; Ploutz-Snyder, Lori; Damann, Volker; Kozlovskaya, Inessa; Mester, Joachim

2016-01-01

To counteract microgravity (µG)-induced adaptation, European Space Agency (ESA) astronauts on long-duration missions (LDMs) to the International Space Station (ISS) perform a daily physical exercise countermeasure program. Since the first ESA crewmember completed an LDM in 2006, the ESA countermeasure program has strived to provide efficient protection against decreases in body mass, muscle strength, bone mass, and aerobic capacity within the operational constraints of the ISS environment and the changing availability of on-board exercise devices. The purpose of this paper is to provide a description of ESA's individualised approach to in-flight exercise countermeasures and an up-to-date picture of how exercise is used to counteract physiological changes resulting from µG-induced adaptation. Changes in the absolute workload for resistive exercise, treadmill running and cycle ergometry throughout ESA's eight LDMs are also presented, and aspects of pre-flight physical preparation and post-flight reconditioning outlined. With the introduction of the advanced resistive exercise device (ARED) in 2009, the relative contribution of resistance exercise to total in-flight exercise increased (33-46 %), whilst treadmill running (42-33 %) and cycle ergometry (26-20 %) decreased. All eight ESA crewmembers increased their in-flight absolute workload during their LDMs for resistance exercise and treadmill running (running speed and vertical loading through the harness), while cycle ergometer workload was unchanged across missions. Increased or unchanged absolute exercise workloads in-flight would appear contradictory to typical post-flight reductions in muscle mass and strength, and cardiovascular capacity following LDMs. However, increased absolute in-flight workloads are not directly linked to changes in exercise capacity as they likely also reflect the planned, conservative loading early in the mission to allow adaption to µG exercise, including personal comfort issues with novel exercise hardware (e.g. the treadmill harness). Inconsistency in hardware and individualised support concepts across time limit the comparability of results from different crewmembers, and questions regarding the difference between cycling and running in µG versus identical exercise here on Earth, and other factors that might influence in-flight exercise performance, still require further investigation.

Biosorption of Cr (VI) ions from electroplating industrial effluent using immobilized Aspergillus niger biomass.

PubMed

Chhikara, S; Dhankhar, R

2008-09-01

A fungus, Aspergillus niger was chemically treated with 0.1 M H2SO4 and 0.1 N NaOH to form biosorbent and it was immobilized in calcium alginate beads. The biosorption capacity of immobilized biosorbents for Cr (VI) was found to depend on pH, contact time, biosorbent dose and initial concentration of Cr (VI). The maximum uptake of Cr (VI) was 92.5, 95.9 and 98.4 mg respectively at a pH of 1.5 and with an increase in pH up to 10.5 the metal uptake decreased gradually up to 38.75, 50.19 and 65.28 mg respectively for acid treated, untreated and base treated fungal biosorbents. Increase in biosorbent dose up to 1 g of biomass and contact time up to 60 min resulted in an increase in biosorption from 19.6, 15.6 and 26.1 mg at a biosorbent dose of 0.1 g 100 ml(-1) to 92.45, 95.7 and 98.52 mg at a biosorbent dose of 1.0 g 100 ml(-1) and then further increase in adsorbent dose and contact time did not resulted in more Cr (VI) adsorption by per unit weight of biosorbent. The value of Kad (adsorption rate constant) revealed the pseudo-first order nature of biosorption. The percentage metal uptake by the biosorbent was found to decrease upto 62.33, 52.67 and 83.5 percent respectively for acid treated, untreated and base treated fungal biosorbents at the 300 mgl(-1) Cr (VI) ion concentration. The resulted data was found to fit well in Langmuir model of adsorption isotherm with a high value of correlation coefficient. The value of Qmax, b (Langmuir constants), R(L) (separation factor) and delta G (Gibb's free energy) revealed the favourable nature of adsorption. The biosorbed metal was eluted from the biosorbent by using 0.1 M H2SO4 as elutant. Immobilized biosorbent can be reused for five consecutive biosorption/desorption cycles without apparent loss of efficiency after its reconditioning. The biosorbent was found to perform well in the electroplating industrial effluent.

Microbial Anomalies Encountered on the International Space Station

NASA Technical Reports Server (NTRS)

Bruce, Rebekah J.; Wong, Wing; Pierson, Duane; Castro, Victoria

2010-01-01

Microorganisms in our living environments are unavoidable. A community of microbes arrived in space with the delivery of the first element of the International Space Station (ISS), attached to hardware and on the bodies of the humans tasked with the initial assembly missions. The risk that microorganisms could cause adverse effects in the health of both the human occupants of the ISS as well as the physical integrity of the station environment and life support systems has been both a driver and a function of engineering and operational controls. Scientists and engineers at NASA have gone to extensive measures to control microbial growth at levels safe for the crewmembers and the spacecraft environment. Many of these measures were initiated with the design of the spacecraft and its systems. Materials used in the ISS were tested for resistance to fungi, such as mold and a paint with a fungus-killing chemical was also used. Controlling the humidity of the air in the Station is also an effective way of discouraging microbe growth. The breathing air is reconditioned by the Environmental Control Life Support System (ECLSS) prior to distribution, utilizing High Efficiency Particulate Air (HEPA) filtration. Requirements restricting the accumulation of water condensate in the air handlers and habitable volume of the ISS were other safeguards added. Water for drinking and food rehydration is disinfected or filtered. A robust in-flight housekeeping regimen for the ISS significantly reduces inappropriate growth of microorganisms and includes a regular cleaning of accessible surfaces with disinfectant wipes. Most of these requirements were suggested by microbiologists to mitigate and possibly prevent many microbiological risks. In addition to these controls, before flight monitoring and analyses of the cabin air, exposed surfaces, water and food, consumables, and crew members are conducted to mitigate microbial risk to the crew and spacecraft. Many microbial risks are much easier to identify and resolve before launch than during space flight. Although the focus has been on prevention of microbiologically related, not all problems can be anticipated. A number of microbial anomalies have occurred on ISS. This paper will discuss the occurrences, root-cause investigations, and mitigation steps taken to remediate the contamination.

The practice of physical activity and cryotherapy in rheumatoid arthritis: systematic review.

PubMed

Peres, Daniele; Sagawa, Yoshimasa; Dugué, Benoit; Domenech, Susana C; Tordi, Nicolas; Prati, Clement

2017-10-01

Rheumatoid arthritis (RA) is an autoimmune, chronic and inflammatory disease, which the affected patients present a higher cardiovascular mortality rate. Physical activities have been identified as the most important strategy to prevent cardiovascular diseases. However, the articular damage and the chronic pain caused by RA challenges its regular practice. Moreover, persons with RA tend to avoid PA due to the fear of exacerbating the inflammatory potential and pain. One alternative to avoid the collateral effects of the PA could be the cryotherapy. Therefore, this study aimed to review studies focused on the use of both PA and cryotherapy in RA patients and to identify evidences that both therapies could be combined in order to optimize the symptomatic treatment. Four databases (MEDLINE, CINAHL, Elsevier and PEDro) were searched to identify publications regarding RA patients, PA and cryotherapy intervention by the terms and operators (rheumatoid arthritis AND exercise OR physical activity OR activity OR training OR reconditioning OR cryotherapy OR cold OR immersion). The selected studies should at least present one measure of the aerobic capacity, disease activity or pain relief. Among 19 studies with RA patients identified, only 4 studies used PA combined with cryotherapy. The other 13 studies used physical activities and 2 studies used cryotherapy intervention. The results of the physical activities combined with cryotherapy studies showed an improvement in the disease activity and pain relief, however without details of the physical activities intervention and an aerobic capacity. Among the physical activities studies, evidence was found suggesting that aerobic exercises and multiactivity exercises with high intensity are the more effective for improve the aerobic capacity. Even if few studies on cryotherapy were found, there are enough evidences in the literature that demonstrate the benefits of this intervention on pain relief and disease activity. In summary, neither study found associated physical activities to improve aerobic capacity with cryotherapy to improve disease activity and pain relief. This may be an innovative therapeutic strategy to improve the aerobic capacity in arthritis patients and consequently reduce their cardiovascular risk while minimizing pain and disease activity.

Effects of elastic resistance exercise on body composition and physical capacity in older women with sarcopenic obesity: A CONSORT-compliant prospective randomized controlled trial.

PubMed

Liao, Chun-De; Tsauo, Jau-Yih; Lin, Li-Fong; Huang, Shih-Wei; Ku, Jan-Wen; Chou, Lin-Chuan; Liou, Tsan-Hon

2017-06-01

Sarcopenia is associated with loss of muscle mass and an increased risk of physical disability in elderly people. However, the prevalence of sarcopenia has increased in obese elderly populations. The purpose of this study was to identify the clinical efficacy of elastic resistance exercise training (RET) in patients with sarcopenic obesity. This study was conducted at the rehabilitation center of a university-based teaching hospital and was designed as a prospective and randomized controlled trial with an intention-to-treat analysis. A total of 46 women aged 67.3 (5.2) years were randomly assigned to an experimental group (EG) and control group (CG). The EG underwent elastic RET for 12 weeks, and the CG received no RET intervention. All outcome measures were assessed at the baseline and posttest, including body composition measured using dual-energy X-ray absorptiometry, muscle quality (MQ) defined as a ratio of muscular strength to muscle mass, and physical capacity assessed using functional mobility tests. One-way analysis of covariance and Pearson correlation were used to compare outcomes between the 2 groups and to identify the relationship between changes in body composition and physical outcomes, respectively. A chi-square test was performed to identify differences in qualitative data between the 2 groups. At the posttest, a significant between-group difference was observed in fat-free mass, MQ, and physical capacity (all P < .05); and a significant correlation was found between leg-lean-mass change and gait speed (r = 0.36; P < .05). After 12 weeks of elastic RET intervention, the EG had significantly fewer patients exhibiting sarcopenia (P < .05) and experiencing physical difficulty (P < .001) than the CG. The present data suggest that elastic resistance exercise exerted benefits on the body composition, MQ, and physical function in patients with sarcopenic obesity. Regular exercise incorporating elastic RET should be used to attenuate muscle mass loss and prevent physical difficulty in obese older adults with sarcopenia on reconditioning therapy. Chinese Clinical Trial Registry, ChiCTR-IPR-15006069.

The use of carbohydrates during exercise as an ergogenic aid.

PubMed

Cermak, Naomi M; van Loon, Luc J C

2013-11-01

Carbohydrate and fat are the two primary fuel sources oxidized by skeletal muscle tissue during prolonged (endurance-type) exercise. The relative contribution of these fuel sources largely depends on the exercise intensity and duration, with a greater contribution from carbohydrate as exercise intensity is increased. Consequently, endurance performance and endurance capacity are largely dictated by endogenous carbohydrate availability. As such, improving carbohydrate availability during prolonged exercise through carbohydrate ingestion has dominated the field of sports nutrition research. As a result, it has been well-established that carbohydrate ingestion during prolonged (>2 h) moderate-to-high intensity exercise can significantly improve endurance performance. Although the precise mechanism(s) responsible for the ergogenic effects are still unclear, they are likely related to the sparing of skeletal muscle glycogen, prevention of liver glycogen depletion and subsequent development of hypoglycemia, and/or allowing high rates of carbohydrate oxidation. Currently, for prolonged exercise lasting 2-3 h, athletes are advised to ingest carbohydrates at a rate of 60 g·h⁻¹ (~1.0-1.1 g·min⁻¹) to allow for maximal exogenous glucose oxidation rates. However, well-trained endurance athletes competing longer than 2.5 h can metabolize carbohydrate up to 90 g·h⁻¹ (~1.5-1.8 g·min⁻¹) provided that multiple transportable carbohydrates are ingested (e.g. 1.2 g·min⁻¹ glucose plus 0.6 g·min⁻¹ of fructose). Surprisingly, small amounts of carbohydrate ingestion during exercise may also enhance the performance of shorter (45-60 min), more intense (>75 % peak oxygen uptake; VO(₂peak)) exercise bouts, despite the fact that endogenous carbohydrate stores are unlikely to be limiting. The mechanism(s) responsible for such ergogenic properties of carbohydrate ingestion during short, more intense exercise bouts has been suggested to reside in the central nervous system. Carbohydrate ingestion during exercise also benefits athletes involved in intermittent/team sports. These athletes are advised to follow similar carbohydrate feeding strategies as the endurance athletes, but need to modify exogenous carbohydrate intake based upon the intensity and duration of the game and the available endogenous carbohydrate stores. Ample carbohydrate intake is also important for those athletes who need to compete twice within 24 h, when rapid repletion of endogenous glycogen stores is required to prevent a decline in performance. To support rapid post-exercise glycogen repletion, large amounts of exogenous carbohydrate (1.2 g·kg⁻¹·h⁻¹) should be provided during the acute recovery phase from exhaustive exercise. For those athletes with a lower gastrointestinal threshold for carbohydrate ingestion immediately post-exercise, and/or to support muscle re-conditioning, co-ingesting a small amount of protein (0.2-0.4 g·kg⁻¹·h⁻¹) with less carbohydrate (0.8 g·kg⁻¹·h⁻¹) may provide a feasible option to achieve similar muscle glycogen repletion rates.

Electrolyte management considerations in modern nickel hydrogen and nickel cadmium cell and battery designs

NASA Technical Reports Server (NTRS)

Thaller, L. H.; Zimmerman, A. H.

1995-01-01

In the early 1980's the NASA Lewis group addressed the topic of designing nickel hydrogen cells for LEO applications. As published in 1984, the design addressed the topics of gas management, liquid management, plate expansion, and the recombination of oxygen during overcharge. This design effort followed principles set forth in an earlier Lewis paper that addressed the topic of pore size engineering. At about that same time, the beneficial effect on cycle life of lower electrolyte concentrations was verified by Hughes Aircraft as part of a Lewis funded study. A succession of life cycle tests of these concepts have been carried out that essentially verified all of this earlier work. During these past two decades, some of the mysteries involved in the active material of the nickel electrode have been resolved by careful research efforts carried out at several laboratories. At The Aerospace Corporation, Dr. Zimmerman has been developing a sophisticated model of an operating nickel hydrogen cell which will be used to model certain mechanisms that have contributed to premature failures in nickel hydrogen and nickel cadmium cells. During the course of trying to understand and model abnormal nickel hydrogen cell behaviors, we have noted that not enough attention has been paid to the potassium ion content in these cells, and more recently batteries. Several of these phenomenon have been well known in the area of alkaline fuel cells, but only recently have they been examined as they might impact alkaline cell designs. This paper will review three general areas where the potassium ion content can impact the performance and life of nickel hydrogen and nickel cadmium devices, Once these phenomenon are understood conceptually, the impact of potassium content on a potential cell design can be evaluated with the aid of an accurate model of an operating cell or battery. All three of these areas are directly related to the volume tolerance and pore size engineering aspects of the components used in the cell or battery design: (1) The gamma phase uptake of potassium ion can result in a lowering of the electrolyte concentration. This leads to a higher electrolyte resistance as well as electrolyte diffusional limitations on the discharge rate. This phenomenon will also impact the response of the cell to a reconditioning cycle. (2) The impact of low level shunt currents in multi-cell con figurations will result in the movement of potassium ion from one part of the battery to another. This will impact the electrolyte volume/vapor pressure relationships within the cell or battery. (3) The transport of water vapor from place to place under the driving force of a tempetature gradient has already impacted cells for the case where water vapor is condensed on a colder cell wall. The paper will explore the convective and diffusive movement of gases saturated with water vapor from a warmer plate pack to a cooler one - both with and without liquid communication.

24 CFR 941.102 - Development methods and funding.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Development methods and funding... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT General § 941.102 Development methods and funding. (a) Methods. A PHA may use any generally accepted method of development including, but not limited to...

Passage Distribution and Federal Columbia River Power System Survival for Steelhead Kelts Tagged Above and at Lower Granite Dam, Year 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colotelo, Alison HA; Harnish, Ryan A.; Jones, Bryan W.

Steelhead (Oncorhynchus mykiss) populations have declined throughout their range in the last century and many populations, including those of the Snake River Basin are listed under the Endangered Species Act of 1973. The reasons for their decline are many and complex, but include habitat loss and degradation, overharvesting, and dam construction. The 2008 Biological Opinion calls for an increase in the abundance of female steelhead through an increase in iteroparity (i.e., repeat spawning) and this can be realized through a combination of reconditioning and in-river survival of migrating kelts. The goal of this study is to provide the data necessarymore » to inform fisheries managers and dam operators of Snake River kelt migration patterns, survival, and routes of dam passage. Steelhead kelts (n = 487) were captured and implanted with acoustic transmitters and passive integrated transponder (PIT)-tags at the Lower Granite Dam (LGR) Juvenile Fish Facility and at weirs located in tributaries of the Snake and Clearwater rivers upstream of LGR. Kelts were monitored as they moved downstream through the Federal Columbia River Power System (FCRPS) by 15 autonomous and 3 cabled acoustic receiver arrays. Cabled receiver arrays deployed on the dam faces allowed for three-dimensional tracking of fish as they approached the dam face and were used to determine the route of dam passage. Overall, 27.3% of the kelts tagged in this study successfully migrated to Martin Bluff (rkm 126, as measured from the mouth of the Columbia River), which is located downstream of all FCRPS dams. Within individual river reaches, survival per kilometer estimates ranged from 0.958 to 0.999; the lowest estimates were observed in the immediate forebay of FCRPS dams. Steelhead kelts tagged in this study passed over the spillway routes (spillway weirs, traditional spill bays) in greater proportions and survived at higher rates compared to the few fish passed through powerhouse routes (turbines and juvenile bypass systems). The results of this study provide information about the route of passage and subsequent survival of steelhead kelts that migrated through the Snake and Columbia rivers from LGR to Bonneville Dam in 2013. These data may be used by fisheries managers and dam operators to identify potential ways to increase the survival of kelts during their seaward migrations.« less

Passage Distribution and Federal Columbia River Power System Survival for Steelhead Kelts Tagged Above and at Lower Granite Dam, Year 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colotelo, Alison H.A.; Harnish, Ryan A.; Jones, Bryan W.

2014-12-15

Steelhead (Oncorhynchus mykiss) populations have declined throughout their range in the last century and many populations, including those of the Snake River Basin are listed under the Endangered Species Act of 1973. The reasons for their decline are many and complex, but include habitat loss and degradation, overharvesting, and dam construction. The 2008 Biological Opinion calls for an increase in the abundance of female steelhead through an increase in iteroparity (i.e., repeat spawning) and this can be realized through a combination of reconditioning and in-river survival of migrating kelts. The goal of this study is to provide the data necessarymore » to inform fisheries managers and dam operators of Snake River kelt migration patterns, survival, and routes of dam passage. Steelhead kelts (n = 487) were captured and implanted with acoustic transmitters and passive integrated transponder (PIT)-tags at the Lower Granite Dam (LGR) Juvenile Fish Facility and at weirs located in tributaries of the Snake and Clearwater rivers upstream of LGR. Kelts were monitored as they moved downstream through the Federal Columbia River Power System (FCRPS) by 15 autonomous and 3 cabled acoustic receiver arrays. Cabled receiver arrays deployed on the dam faces allowed for three-dimensional tracking of fish as they approached the dam face and were used to determine the route of dam passage. Overall, 27.3% of the kelts tagged in this study successfully migrated to Martin Bluff (rkm 126, as measured from the mouth of the Columbia River), which is located downstream of all FCRPS dams. Within individual river reaches, survival per kilometer estimates ranged from 0.958 to 0.999; the lowest estimates were observed in the immediate forebay of FCRPS dams. Steelhead kelts tagged in this study passed over the spillway routes (spillway weirs, traditional spill bays) in greater proportions and survived at higher rates compared to the few fish passed through powerhouse routes (turbines and juvenile bypass systems). The results of this study provide information about the route of passage and subsequent survival of steelhead kelts that migrated through the Snake and Columbia rivers from LGR to Bonneville Dam in 2013. These data may be used by fisheries managers and dam operators to identify potential ways to increase the survival of kelts during their seaward migrations.« less

Early results in transplantation of initially rejected donor lungs after ex vivo lung perfusion: a case-control study.

PubMed

Wallinder, Andreas; Ricksten, Sven-Erik; Silverborn, Martin; Hansson, Christoffer; Riise, Gerdt C; Liden, Hans; Jeppsson, Anders; Dellgren, Göran

2014-01-01

An increasing number of studies have shown that ex vivo lung perfusion (EVLP) is safe and that rejected donor lungs can be resuscitated and used for lung transplantation (LTx). Early clinical outcomes in patients transplanted with reconditioned lungs at our centre were reviewed and compared with those of contemporary non-EVLP controls. During 18 months starting January 2011, 11 pairs of donor lungs initially deemed unsuitable for transplantation underwent EVLP. Haemodynamic (pulmonary flow, vascular resistance and artery pressure) and respiratory (peak airway pressure and compliance) parameters were analysed during evaluation. Lungs that improved (n = 11) to meet International Society of Heart and Lung Transplantation criteria were transplanted and compared with patients transplanted with non-EVLP lungs (n = 47) during the same time period. Donor lungs were initially rejected due to either inferior PaO2/FiO2 ratio (n = 9), bilateral infiltrate on chest X-ray (n = 1) or ongoing extra corporeal membrane oxygenation (n = 1). The donor lungs improved from a mean PaO2/FiO2 ratio of 27.9 kPa in the donor to a mean of 59.6 kPa at the end of the EVLP (median improvement 28.4 kPa, range 21.0-50.7 kPa). Two single lungs were deemed unsuitable and not used for LTx. Eleven recipients from the regular waiting list underwent either single (n = 3) LTx or double (n = 8) LTx with EVLP-treated lungs. The median time to extubation (12 (range, 3-912) vs 6 (range, 2-1296) h) and median intensive care unit (ICU) stay (152 (range, 40-625) vs 48 (range, 22-1632) h) were longer in the EVLP group (P = 0.05 and P = 0.01, respectively). There were no differences in length of hospital stay (median 28 (range 25-93) vs 28 (18-209), P = 0.21). Two patients in the EVLP group and 6 in the control group had primary graft dysfunction >Grade 1 at 72 h postoperatively. Three patients in the control group died before discharge. All recipients of EVLP lungs were discharged alive from hospital. The use of EVLP seems safe and indicates that lungs otherwise refused for LTx can be recovered and subsequently used for transplantation, although time to extubation and ICU stay were longer for the EVLP group.

Is vertebrate mortality correlated to potential permeability by underpasses along low-traffic roads?

PubMed

Delgado, Juan D; Morelli, Federico; Arroyo, Natalia L; Durán, Jorge; Rodríguez, Alexandra; Rosal, Antonio; Palenzuela, María Del Valle; Rodríguez, Jesús D G P

2018-09-01

Road permeability to animal movements depends among several factors on structures which, integrated in the road design, operate as safe conducts to mitigate vehicle collision and barrier effects. There is abundant evidence that wildlife makes use of such structures as safe passages to cross roads. We analyzed the spatial relationship between road drainage elements (N = 253; mostly culverts) as potential faunal underpasses, and mortality due to vehicle collisions in two seasons and on four relatively low-traffic roads (<5000 cars/day) traversing oak rangelands of western Andalusia (S Spain). Focusing on amphibians, reptiles and mammals, we recorded and located casualties (N = 238 individuals, 35 species) along these roads, identifying and characterizing all potential underpasses. Overall frequencies of casualties and spatial distribution were highly variable both within and among these roads. We obtained an estimation of potential permeability for the different roads. We detected, located and described a wide supply and a very variable pattern of drainage culverts and other underpasses, with differences among roads in passage attributes potentially affecting permeability for wildlife, such as spatial arrangement, number, density (frequency or concentration of passages) and dimensions. We used Mantel tests to assess spatial congruence of passages and road-killed animals. We applied generalized linear mixed models fitted by maximum likelihood through Akaike Information Criterion to explain the variation in the distance of the 238 casualties to the nearest underpasses, with road transect and season as random factors, and traffic intensity, speed and vertebrate class as fixed effects. Both road-killed animals and underpass distribution followed aggregated patterns, and casualties were not significantly related to underpasses along any of the 4 roads. There were no differences in distance of casualties to the nearest underpass for the three vertebrate classes. Although existing underpasses were abundant, we could not correlate potential permeability with reduced mortality along these roads, and other factors potentially affecting roadkill aggregations should be evaluated along with permeability assessment. Mitigation of road-caused mortality can still be greatly improved for these roads, through measures of reconditioning and proper management of existing underpasses, aiming to maximize road permeability and reducing major impacts upon animal populations of Andalusian rangelands. Copyright © 2018 Elsevier Ltd. All rights reserved.

Hard metal exposures. Part 1: Observed performance of three local exhaust ventilation systems.

PubMed

Guffey, S E; Simcox, N; Booth, D W; Hibbard, R; Stebbins, A

2000-04-01

Not every ventilation system performs as intended; much can be learned when they do not. The purpose of this study was to compare observed initial performance to expected levels for three saw-reconditioning shop ventilation systems and to characterize the changes in performance of the systems over a one-year period. These three local exhaust ventilation systems were intended to control worker exposures to cobalt, cadmium, and chromium during wet grinding, dry grinding, and welding/brazing activities. Prior to installation the authors provided some design guidance based on Industrial Ventilation, a Manual of Recommended Practice. However, the authors had limited influence on the actual installation and operation and no line authority for the systems. In apparent efforts to cut costs and to respond to other perceived needs, the installed systems deviated from the specifications used in pressure calculations in many important aspects, including adding branch ducts, use of flexible ducts, the choice of fans, and the construction of some hoods. After installation of the three systems, ventilation measurements were taken to determine if the systems met design specifications, and worker exposures were measured to determine effectiveness. The results of the latter will be published as a companion article. The deviations from design and maintenance failures may have adversely affected performance. From the beginning to the end of the study period the distribution of air flow never matched the design specifications for the systems. The observed air flows measured within the first month of installation did not match the predicated design air flows for any of the systems, probably because of the differences between the design and the installed system. Over the first year of operation, hood air flow variability was high due to inadequate cleaning of the sticky process materials which rapidly accumulated in the branch ducts. Poor distribution of air flows among branch ducts frequently produced individual hood air flows that were far below specified design levels even when the total air flow through that system was more than adequate. To experienced practitioners, it is not surprising that deviations from design recommendations and poor maintenance would be associated with poor system performance. Although commonplace, such experiences have not been documented in peer-reviewed publications to date. This publication is a first step in providing that documentation.

24 CFR 941.102 - Development methods and funding.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Development methods and funding... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT General § 941.102 Development methods and funding. (a... housing units using this method. (b) Funding. A PHA may develop public housing with: (1) Development funds...

24 CFR 941.102 - Development methods and funding.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Development methods and funding... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT General § 941.102 Development methods and funding. (a... housing units using this method. (b) Funding. A PHA may develop public housing with: (1) Development funds...

24 CFR 941.102 - Development methods and funding.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the staff of the PHA perform the work. (4) Mixed-finance. This method involves financing from both... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Development methods and funding... URBAN DEVELOPMENT PUBLIC HOUSING DEVELOPMENT General § 941.102 Development methods and funding. (a...

Application of LC/MS/MS Techniques to Development of US ...

EPA Pesticide Factsheets

This presentation will describe the U.S. EPA’s drinking water and ambient water method development program in relation to the process employed and the typical challenges encountered in developing standardized LC/MS/MS methods for chemicals of emerging concern. The EPA’s Drinking Water Contaminant Candidate List and Unregulated Contaminant Monitoring Regulations, which are the driving forces behind drinking water method development, will be introduced. Three drinking water LC/MS/MS methods (Methods 537, 544 and a new method for nonylphenol) and two ambient water LC/MS/MS methods for cyanotoxins will be described that highlight some of the challenges encountered during development of these methods. This presentation will provide the audience with basic understanding of EPA's drinking water method development program and an introduction to two new ambient water EPA methods.

Method Engineering: A Service-Oriented Approach

NASA Astrophysics Data System (ADS)

Cauvet, Corine

In the past, a large variety of methods have been published ranging from very generic frameworks to methods for specific information systems. Method Engineering has emerged as a research discipline for designing, constructing and adapting methods for Information Systems development. Several approaches have been proposed as paradigms in method engineering. The meta modeling approach provides means for building methods by instantiation, the component-based approach aims at supporting the development of methods by using modularization constructs such as method fragments, method chunks and method components. This chapter presents an approach (SO2M) for method engineering based on the service paradigm. We consider services as autonomous computational entities that are self-describing, self-configuring and self-adapting. They can be described, published, discovered and dynamically composed for processing a consumer's demand (a developer's requirement). The method service concept is proposed to capture a development process fragment for achieving a goal. Goal orientation in service specification and the principle of service dynamic composition support method construction and method adaptation to different development contexts.

An exploratory survey of methods used to develop measures of performance

NASA Astrophysics Data System (ADS)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

78 FR 22540 - Notice of Public Meeting/Webinar: EPA Method Development Update on Drinking Water Testing Methods...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

...: EPA Method Development Update on Drinking Water Testing Methods for Contaminant Candidate List... Division will describe methods currently in development for many CCL contaminants, with an expectation that several of these methods will support future cycles of the Unregulated Contaminant Monitoring Rule (UCMR...

HEATED PURGE AND TRAP METHOD DEVELOPMENT AND TESTING

EPA Science Inventory

The goal of the research was to develop a heated purge and trap method that could be used in conjunction with SW-846 method 8240 for the analysis of volatile, water soluble Appendix VIII analytes. The developed method was validated according to a partial single laboratory method ...

The change and development of statistical methods used in research articles in child development 1930-2010.

PubMed

Køppe, Simo; Dammeyer, Jesper

2014-09-01

The evolution of developmental psychology has been characterized by the use of different quantitative and qualitative methods and procedures. But how does the use of methods and procedures change over time? This study explores the change and development of statistical methods used in articles published in Child Development from 1930 to 2010. The methods used in every article in the first issue of every volume were categorized into four categories. Until 1980 relatively simple statistical methods were used. During the last 30 years there has been an explosive use of more advanced statistical methods employed. The absence of statistical methods or use of simple methods had been eliminated.

Agile Software Development

ERIC Educational Resources Information Center

Biju, Soly Mathew

2008-01-01

Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

Development of nondestructive methods for measurement of slab thickness and modulus of rupture in concrete pavements.

DOT National Transportation Integrated Search

2005-01-01

This report describes work to develop non-destructive testing methods for concrete pavements. Two methods, for pavement thickness and in-place strength estimation, respectively, were developed and evaluated. The thickness estimation method is based o...

Method Development in Forensic Toxicology.

PubMed

Peters, Frank T; Wissenbach, Dirk K; Busardo, Francesco Paolo; Marchei, Emilia; Pichini, Simona

2017-01-01

In the field of forensic toxicology, the quality of analytical methods is of great importance to ensure the reliability of results and to avoid unjustified legal consequences. A key to high quality analytical methods is a thorough method development. The presented article will provide an overview on the process of developing methods for forensic applications. This includes the definition of the method's purpose (e.g. qualitative vs quantitative) and the analytes to be included, choosing an appropriate sample matrix, setting up separation and detection systems as well as establishing a versatile sample preparation. Method development is concluded by an optimization process after which the new method is subject to method validation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Development Optimization and Uncertainty Analysis Methods for Oil and Gas Reservoirs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ettehadtavakkol, Amin, E-mail: amin.ettehadtavakkol@ttu.edu; Jablonowski, Christopher; Lake, Larry

Uncertainty complicates the development optimization of oil and gas exploration and production projects, but methods have been devised to analyze uncertainty and its impact on optimal decision-making. This paper compares two methods for development optimization and uncertainty analysis: Monte Carlo (MC) simulation and stochastic programming. Two example problems for a gas field development and an oilfield development are solved and discussed to elaborate the advantages and disadvantages of each method. Development optimization involves decisions regarding the configuration of initial capital investment and subsequent operational decisions. Uncertainty analysis involves the quantification of the impact of uncertain parameters on the optimum designmore » concept. The gas field development problem is designed to highlight the differences in the implementation of the two methods and to show that both methods yield the exact same optimum design. The results show that both MC optimization and stochastic programming provide unique benefits, and that the choice of method depends on the goal of the analysis. While the MC method generates more useful information, along with the optimum design configuration, the stochastic programming method is more computationally efficient in determining the optimal solution. Reservoirs comprise multiple compartments and layers with multiphase flow of oil, water, and gas. We present a workflow for development optimization under uncertainty for these reservoirs, and solve an example on the design optimization of a multicompartment, multilayer oilfield development.« less

Method Development and Monitoring of Cyanotoxins in Water ...

EPA Pesticide Factsheets

This presentation describes method development of two ambient water LC/MS/MS methods for microcystins, cylindrospermopsin and anatoxin-a. Ruggedness of the methods will be demonstrated by evaluation of quality control samples derived from various water bodies across the country. Presentation at the Central Regional meeting of the American Chemical Society ambient water methods development for cyanotoxins

A robust quantitative near infrared modeling approach for blend monitoring.

PubMed

Mohan, Shikhar; Momose, Wataru; Katz, Jeffrey M; Hossain, Md Nayeem; Velez, Natasha; Drennen, James K; Anderson, Carl A

2018-01-30

This study demonstrates a material sparing Near-Infrared modeling approach for powder blend monitoring. In this new approach, gram scale powder mixtures are subjected to compression loads to simulate the effect of scale using an Instron universal testing system. Models prepared by the new method development approach (small-scale method) and by a traditional method development (blender-scale method) were compared by simultaneously monitoring a 1kg batch size blend run. Both models demonstrated similar model performance. The small-scale method strategy significantly reduces the total resources expended to develop Near-Infrared calibration models for on-line blend monitoring. Further, this development approach does not require the actual equipment (i.e., blender) to which the method will be applied, only a similar optical interface. Thus, a robust on-line blend monitoring method can be fully developed before any large-scale blending experiment is viable, allowing the blend method to be used during scale-up and blend development trials. Copyright © 2017. Published by Elsevier B.V.

A Model-Driven Development Method for Management Information Systems

NASA Astrophysics Data System (ADS)

Mizuno, Tomoki; Matsumoto, Keinosuke; Mori, Naoki

Traditionally, a Management Information System (MIS) has been developed without using formal methods. By the informal methods, the MIS is developed on its lifecycle without having any models. It causes many problems such as lack of the reliability of system design specifications. In order to overcome these problems, a model theory approach was proposed. The approach is based on an idea that a system can be modeled by automata and set theory. However, it is very difficult to generate automata of the system to be developed right from the start. On the other hand, there is a model-driven development method that can flexibly correspond to changes of business logics or implementing technologies. In the model-driven development, a system is modeled using a modeling language such as UML. This paper proposes a new development method for management information systems applying the model-driven development method to a component of the model theory approach. The experiment has shown that a reduced amount of efforts is more than 30% of all the efforts.

Beyond the Condom: Frontiers in Male Contraception

PubMed Central

Roth, Mara Y.; Amory, John K.

2016-01-01

Nearly half of all pregnancies worldwide are unplanned, despite numerous contraceptive options available. No new contraceptive method has been developed for men since the invention of condom. Nevertheless, more than 25% of contraception worldwide relies on male methods. Therefore, novel effective methods of male contraception are of interest. Herein we review the physiologic basis for both male hormonal and nonhormonal methods of contraception. We review the history of male hormonal contraception development, current hormonal agents in development, as well as the potential risks and benefits of male hormonal contraception options for men. Nonhormonal methods reviewed will include both pharmacological and mechanical approaches in development, with specific focus on methods which inhibit the testicular retinoic acid synthesis and action. Multiple hormonal and nonhormonal methods of male contraception are in the drug development pathway, with the hope that a reversible, reliable, safe method of male contraception will be available to couples in the not too distant future. PMID:26947703

The application of generalized, cyclic, and modified numerical integration algorithms to problems of satellite orbit computation

NASA Technical Reports Server (NTRS)

Chesler, L.; Pierce, S.

1971-01-01

Generalized, cyclic, and modified multistep numerical integration methods are developed and evaluated for application to problems of satellite orbit computation. Generalized methods are compared with the presently utilized Cowell methods; new cyclic methods are developed for special second-order differential equations; and several modified methods are developed and applied to orbit computation problems. Special computer programs were written to generate coefficients for these methods, and subroutines were written which allow use of these methods with NASA's GEOSTAR computer program.

Multigrid Methods for Aerodynamic Problems in Complex Geometries

NASA Technical Reports Server (NTRS)

Caughey, David A.

1995-01-01

Work has been directed at the development of efficient multigrid methods for the solution of aerodynamic problems involving complex geometries, including the development of computational methods for the solution of both inviscid and viscous transonic flow problems. The emphasis is on problems of complex, three-dimensional geometry. The methods developed are based upon finite-volume approximations to both the Euler and the Reynolds-Averaged Navier-Stokes equations. The methods are developed for use on multi-block grids using diagonalized implicit multigrid methods to achieve computational efficiency. The work is focused upon aerodynamic problems involving complex geometries, including advanced engine inlets.

Toward a Method for Exposing and Elucidating Ethical Issues with Human Cognitive Enhancement Technologies.

PubMed

Hofmann, Bjørn

2017-04-01

To develop a method for exposing and elucidating ethical issues with human cognitive enhancement (HCE). The intended use of the method is to support and facilitate open and transparent deliberation and decision making with respect to this emerging technology with great potential formative implications for individuals and society. Literature search to identify relevant approaches. Conventional content analysis of the identified papers and methods in order to assess their suitability for assessing HCE according to four selection criteria. Method development. Amendment after pilot testing on smart-glasses. Based on three existing approaches in health technology assessment a method for exposing and elucidating ethical issues in the assessment of HCE technologies was developed. Based on a pilot test for smart-glasses, the method was amended. The method consists of six steps and a guiding list of 43 questions. A method for exposing and elucidating ethical issues in the assessment of HCE was developed. The method provides the ground work for context specific ethical assessment and analysis. Widespread use, amendments, and further developments of the method are encouraged.

Development of quadruped walking locomotion gait generator using a hybrid method

NASA Astrophysics Data System (ADS)

Jasni, F.; Shafie, A. A.

2013-12-01

The earth, in many areas is hardly reachable by the wheeled or tracked locomotion system. Thus, walking locomotion system is becoming a favourite option for mobile robot these days. This is because of the ability of walking locomotion to move on the rugged and unlevel terrains. However, to develop a walking locomotion gait for a robot is not a simple task. Central Pattern Generator (CPGs) method is a biological inspired method that is introduced as a method to develop the gait for the walking robot recently to tackle the issue faced by the conventional method of pre-designed trajectory based method. However, research shows that even the CPG method do have some limitations. Thus, in this paper, a hybrid method that combines CPG and the pre-designed trajectory based method is introduced to develop a walking gait for quadruped walking robot. The 3-D foot trajectories and the joint angle trajectories developed using the proposed method are compared with the data obtained via the conventional method of pre-designed trajectory to confirm the performance.

Lessons from comparative effectiveness research methods development projects funded under the Recovery Act.

PubMed

Zurovac, Jelena; Esposito, Dominick

2014-11-01

The American Recovery and Reinvestment Act of 2009 (ARRA) directed nearly US$29.2 million to comparative effectiveness research (CER) methods development. To help inform future CER methods investments, we describe the ARRA CER methods projects, identify barriers to this research and discuss the alignment of topics with published methods development priorities. We used several existing resources and held discussions with ARRA CER methods investigators. Although funded projects explored many identified priority topics, investigators noted that much work remains. For example, given the considerable investments in CER data infrastructure, the methods development field can benefit from additional efforts to educate researchers about the availability of new data sources and about how best to apply methods to match their research questions and data.

DEVELOPMENT OF SAMPLING AND ANALYTICAL METHODS FOR THE MEASUREMENT OF NITROUS OXIDE FROM FOSSIL FUEL COMBUSTION SOURCES

EPA Science Inventory

The report documents the technical approach and results achieved while developing a grab sampling method and an automated, on-line gas chromatography method suitable to characterize nitrous oxide (N2O) emissions from fossil fuel combustion sources. The two methods developed have...

Development of a factory/refinery method to measure total, soluble, and insoluble starch in sugar products

USDA-ARS?s Scientific Manuscript database

An easy, rapid, and inexpensive method was developed to measure total, soluble, and insoluble starch in products at the factory and refinery, using microwave-assisted neutralization chemistry. The method was optimized using the previously developed USDA Starch Research method as a reference. Optimal...

How Qualitative Methods Can be Used to Inform Model Development.

PubMed

Husbands, Samantha; Jowett, Susan; Barton, Pelham; Coast, Joanna

2017-06-01

Decision-analytic models play a key role in informing healthcare resource allocation decisions. However, there are ongoing concerns with the credibility of models. Modelling methods guidance can encourage good practice within model development, but its value is dependent on its ability to address the areas that modellers find most challenging. Further, it is important that modelling methods and related guidance are continually updated in light of any new approaches that could potentially enhance model credibility. The objective of this article was to highlight the ways in which qualitative methods have been used and recommended to inform decision-analytic model development and enhance modelling practices. With reference to the literature, the article discusses two key ways in which qualitative methods can be, and have been, applied. The first approach involves using qualitative methods to understand and inform general and future processes of model development, and the second, using qualitative techniques to directly inform the development of individual models. The literature suggests that qualitative methods can improve the validity and credibility of modelling processes by providing a means to understand existing modelling approaches that identifies where problems are occurring and further guidance is needed. It can also be applied within model development to facilitate the input of experts to structural development. We recommend that current and future model development would benefit from the greater integration of qualitative methods, specifically by studying 'real' modelling processes, and by developing recommendations around how qualitative methods can be adopted within everyday modelling practice.

Evaluation index system of steel industry sustainable development based on entropy method and topsis method

NASA Astrophysics Data System (ADS)

Ronglian, Yuan; Mingye, Ai; Qiaona, Jia; Yuxuan, Liu

2018-03-01

Sustainable development is the only way for the development of human society. As an important part of the national economy, the steel industry is an energy-intensive industry and needs to go further for sustainable development. In this paper, we use entropy method and Topsis method to evaluate the development of China’s steel industry during the “12th Five-Year Plan” from four aspects: resource utilization efficiency, main energy and material consumption, pollution status and resource reuse rate. And we also put forward some suggestions for the development of China’s steel industry.

Development and Validation of HPLC-DAD and UHPLC-DAD Methods for the Simultaneous Determination of Guanylhydrazone Derivatives Employing a Factorial Design.

PubMed

Azevedo de Brito, Wanessa; Gomes Dantas, Monique; Andrade Nogueira, Fernando Henrique; Ferreira da Silva-Júnior, Edeildo; Xavier de Araújo-Júnior, João; Aquino, Thiago Mendonça de; Adélia Nogueira Ribeiro, Êurica; da Silva Solon, Lilian Grace; Soares Aragão, Cícero Flávio; Barreto Gomes, Ana Paula

2017-08-30

Guanylhydrazones are molecules with great pharmacological potential in various therapeutic areas, including antitumoral activity. Factorial design is an excellent tool in the optimization of a chromatographic method, because it is possible quickly change factors such as temperature, mobile phase composition, mobile phase pH, column length, among others to establish the optimal conditions of analysis. The aim of the present work was to develop and validate a HPLC and UHPLC methods for the simultaneous determination of guanylhydrazones with anticancer activity employing experimental design. Precise, exact, linear and robust HPLC and UHPLC methods were developed and validated for the simultaneous quantification of the guanylhydrazones LQM10, LQM14, and LQM17. The UHPLC method was more economic, with a four times less solvent consumption, and 20 times less injection volume, what allowed better column performance. Comparing the empirical approach employed in the HPLC method development to the DoE approach employed in the UHPLC method development, we can conclude that the factorial design made the method development faster, more practical and rational. This resulted in methods that can be employed in the analysis, evaluation and quality control of these new synthetic guanylhydrazones.

Develop Accurate Methods for Characterizing and Quantifying Cohesive Sediment Erosion Under Combined Current-Wave Conditions

DTIC Science & Technology

2017-09-01

ER D C/ CH L TR -1 7- 15 Strategic Environmental Research and Development Program Develop Accurate Methods for Characterizing and...current environments. This research will provide more accurate methods for assessing contaminated sediment stability for many DoD and Environmental...47.88026 pascals yards 0.9144 meters ERDC/CHL TR-17-15 xi Executive Summary Objective The proposed research goal is to develop laboratory methods

Computational structural mechanics methods research using an evolving framework

NASA Technical Reports Server (NTRS)

Knight, N. F., Jr.; Lotts, C. G.; Gillian, R. E.

1990-01-01

Advanced structural analysis and computational methods that exploit high-performance computers are being developed in a computational structural mechanics research activity sponsored by the NASA Langley Research Center. These new methods are developed in an evolving framework and applied to representative complex structural analysis problems from the aerospace industry. An overview of the methods development environment is presented, and methods research areas are described. Selected application studies are also summarized.

CSM Testbed Development and Large-Scale Structural Applications

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Gillian, R. E.; Mccleary, Susan L.; Lotts, C. G.; Poole, E. L.; Overman, A. L.; Macy, S. C.

1989-01-01

A research activity called Computational Structural Mechanics (CSM) conducted at the NASA Langley Research Center is described. This activity is developing advanced structural analysis and computational methods that exploit high-performance computers. Methods are developed in the framework of the CSM Testbed software system and applied to representative complex structural analysis problems from the aerospace industry. An overview of the CSM Testbed methods development environment is presented and some new numerical methods developed on a CRAY-2 are described. Selected application studies performed on the NAS CRAY-2 are also summarized.

Capillary zone electrophoresis method for a highly glycosylated and sialylated recombinant protein: development, characterization and application for process development.

PubMed

Zhang, Le; Lawson, Ken; Yeung, Bernice; Wypych, Jette

2015-01-06

A purity method based on capillary zone electrophoresis (CZE) has been developed for the separation of isoforms of a highly glycosylated protein. The separation was found to be driven by the number of sialic acids attached to each isoform. The method has been characterized using orthogonal assays and shown to have excellent specificity, precision and accuracy. We have demonstrated the CZE method is a useful in-process assay to support cell culture and purification development of this glycoprotein. Compared to isoelectric focusing (IEF), the CZE method provides more quantitative results and higher sample throughput with excellent accuracy, qualities that are required for process development. In addition, the CZE method has been applied in the stability testing of purified glycoprotein samples.

Beyond the Condom: Frontiers in Male Contraception.

PubMed

Roth, Mara Y; Amory, John K

2016-05-01

Nearly half of all pregnancies worldwide are unplanned, despite numerous contraceptive options available. No new contraceptive method has been developed for men since the invention of condom. Nevertheless, more than 25% of contraception worldwide relies on male methods. Therefore, novel effective methods of male contraception are of interest. Herein we review the physiologic basis for both male hormonal and nonhormonal methods of contraception. We review the history of male hormonal contraception development, current hormonal agents in development, as well as the potential risks and benefits of male hormonal contraception options for men. Nonhormonal methods reviewed will include both pharmacological and mechanical approaches in development, with specific focus on methods which inhibit the testicular retinoic acid synthesis and action. Multiple hormonal and nonhormonal methods of male contraception are in the drug development pathway, with the hope that a reversible, reliable, safe method of male contraception will be available to couples in the not too distant future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Development and validation of a single robust HPLC method for the characterization of a pharmaceutical starting material and impurities from three suppliers using three separate synthetic routes.

PubMed

Sheldon, E M; Downar, J B

2000-08-15

Novel approaches to the development of analytical procedures for monitoring incoming starting material in support of chemical/pharmaceutical processes are described. High technology solutions were utilized for timely process development and preparation of high quality clinical supplies. A single robust HPLC method was developed and characterized for the analysis of the key starting material from three suppliers. Each supplier used a different process for the preparation of this material and, therefore, each suppliers' material exhibited a unique impurity profile. The HPLC method utilized standard techniques acceptable for release testing in a QC/manufacturing environment. An automated experimental design protocol was used to characterize the robustness of the HPLC method. The method was evaluated for linearity, limit of quantitation, solution stability, and precision of replicate injections. An LC-MS method that emulated the release HPLC method was developed and the identities of impurities were mapped between the two methods.

The Importance of Method Selection in Determining Product Integrity for Nutrition Research1234

PubMed Central

Mudge, Elizabeth M; Brown, Paula N

2016-01-01

The American Herbal Products Association estimates that there as many as 3000 plant species in commerce. The FDA estimates that there are about 85,000 dietary supplement products in the marketplace. The pace of product innovation far exceeds that of analytical methods development and validation, with new ingredients, matrixes, and combinations resulting in an analytical community that has been unable to keep up. This has led to a lack of validated analytical methods for dietary supplements and to inappropriate method selection where methods do exist. Only after rigorous validation procedures to ensure that methods are fit for purpose should they be used in a routine setting to verify product authenticity and quality. By following systematic procedures and establishing performance requirements for analytical methods before method development and validation, methods can be developed that are both valid and fit for purpose. This review summarizes advances in method selection, development, and validation regarding herbal supplement analysis and provides several documented examples of inappropriate method selection and application. PMID:26980823

The Importance of Method Selection in Determining Product Integrity for Nutrition Research.

PubMed

Mudge, Elizabeth M; Betz, Joseph M; Brown, Paula N

2016-03-01

The American Herbal Products Association estimates that there as many as 3000 plant species in commerce. The FDA estimates that there are about 85,000 dietary supplement products in the marketplace. The pace of product innovation far exceeds that of analytical methods development and validation, with new ingredients, matrixes, and combinations resulting in an analytical community that has been unable to keep up. This has led to a lack of validated analytical methods for dietary supplements and to inappropriate method selection where methods do exist. Only after rigorous validation procedures to ensure that methods are fit for purpose should they be used in a routine setting to verify product authenticity and quality. By following systematic procedures and establishing performance requirements for analytical methods before method development and validation, methods can be developed that are both valid and fit for purpose. This review summarizes advances in method selection, development, and validation regarding herbal supplement analysis and provides several documented examples of inappropriate method selection and application. © 2016 American Society for Nutrition.

A Case Study of a Mixed Methods Study Engaged in Integrated Data Analysis

ERIC Educational Resources Information Center

Schiazza, Daniela Marie

2013-01-01

The nascent field of mixed methods research has yet to develop a cohesive framework of guidelines and procedures for mixed methods data analysis (Greene, 2008). To support the field's development of analytical frameworks, this case study reflects on the development and implementation of a mixed methods study engaged in integrated data analysis.…

COMPARISON OF MONTE CARLO METHODS FOR NONLINEAR RADIATION TRANSPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

W. R. MARTIN; F. B. BROWN

2001-03-01

Five Monte Carlo methods for solving the nonlinear thermal radiation transport equations are compared. The methods include the well-known Implicit Monte Carlo method (IMC) developed by Fleck and Cummings, an alternative to IMC developed by Carter and Forest, an ''exact'' method recently developed by Ahrens and Larsen, and two methods recently proposed by Martin and Brown. The five Monte Carlo methods are developed and applied to the radiation transport equation in a medium assuming local thermodynamic equilibrium. Conservation of energy is derived and used to define appropriate material energy update equations for each of the methods. Details of the Montemore » Carlo implementation are presented, both for the random walk simulation and the material energy update. Simulation results for all five methods are obtained for two infinite medium test problems and a 1-D test problem, all of which have analytical solutions. Conclusions regarding the relative merits of the various schemes are presented.« less

Develop Accurate Methods for Characterizing And Quantifying Cohesive Sediment Erosion Under Combined Current Wave Conditions: Project ER 1497

DTIC Science & Technology

2017-09-01

ER D C/ CH L TR -1 7- 15 Strategic Environmental Research and Development Program Develop Accurate Methods for Characterizing and...current environments. This research will provide more accurate methods for assessing contaminated sediment stability for many DoD and Environmental...47.88026 pascals yards 0.9144 meters ERDC/CHL TR-17-15 xi Executive Summary Objective The proposed research goal is to develop laboratory methods

Using practice development methodology to develop children's centre teams: ideas for the future.

PubMed

Hemingway, Ann; Cowdell, Fiona

2009-09-01

The Children's Centre Programme is a recent development in the UK and brings together multi-agency teams to work with disadvantaged families. Practice development methods enable teams to work together in new ways. Although the term practice development remains relatively poorly defined, its key properties suggest that it embraces engagement, empowerment, evaluation and evolution. This paper introduces the Children's Centre Programme and practice development methods and aims to discuss the relevance of using this method to develop teams in children's centres through considering the findings from an evaluation of a two-year project to develop inter-agency public health teams. The evaluation showed that practice development methods can enable successful team development and showed that through effective facilitation, teams can change their practice to focus on areas of local need. The team came up with their own process to develop a strategy for their locality.

Moral counselling: a method in development.

PubMed

de Groot, Jack; Leget, Carlo

2011-01-01

This article describes a method of moral counselling developed in the Radboud University Medical Centre Nijmegen (The Netherlands). The authors apply insights of Paul Ricoeur to the non-directive counselling method of Carl Rogers in their work of coaching patients with moral problems in health care. The developed method was shared with other health care professionals in a training course. Experiences in the course and further practice led to further improvement of the method.

Recommendations for Developing Alternative Test Methods for Developmental Neurotoxicity

EPA Science Inventory

There is great interest in developing alternative methods for developmental neurotoxicity testing (DNT) that are cost-efficient, use fewer animals and are based on current scientific knowledge of the developing nervous system. Alternative methods will require demonstration of the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor-Pashow, K.; Fondeur, F.; White, T.

Savannah River National Laboratory (SRNL) was tasked with identifying and developing at least one, but preferably two methods for quantifying the suppressor in the Next Generation Solvent (NGS) system. The suppressor is a guanidine derivative, N,N',N"-tris(3,7-dimethyloctyl)guanidine (TiDG). A list of 10 possible methods was generated, and screening experiments were performed for 8 of the 10 methods. After completion of the screening experiments, the non-aqueous acid-base titration was determined to be the most promising, and was selected for further development as the primary method. {sup 1}H NMR also showed promising results from the screening experiments, and this method was selected formore » further development as the secondary method. Other methods, including {sup 36}Cl radiocounting and ion chromatography, also showed promise; however, due to the similarity to the primary method (titration) and the inability to differentiate between TiDG and TOA (tri-n-ocytlamine) in the blended solvent, {sup 1}H NMR was selected over these methods. Analysis of radioactive samples obtained from real waste ESS (extraction, scrub, strip) testing using the titration method showed good results. Based on these results, the titration method was selected as the method of choice for TiDG measurement. {sup 1}H NMR has been selected as the secondary (back-up) method, and additional work is planned to further develop this method and to verify the method using radioactive samples. Procedures for analyzing radioactive samples of both pure NGS and blended solvent were developed and issued for the both methods.« less

DEVELOPMENT AND VALIDATION OF BROMATOMETRIC, DIAZOTIZATION AND VIS-SPECTROPHOTOMETRIC METHODS FOR THE DETERMINATION OF MESALAZINE IN PHARMACEUTICAL FORMULATION.

PubMed

Zawada, Elzabieta; Pirianowicz-Chaber, Elzabieta; Somogi, Aleksander; Pawinski, Tomasz

2017-03-01

Three new methods were developed for the quantitative determination of mesalazine in the form of the pure substance or in the form of suppositories and tablets - accordingly: bromatometric, diazotization and visible light spectrophotometry method. Optimizing the time and the temperature of the bromination reaction (50⁰C, 50 min) 4-amino-2,3,5,6-tetrabromophenol was obtained. The results obtained were reproducible, accurate and precise. Developed methods were compared to the pharmacopoeial approach - alkalimetry in an aqueous medium. The validation parameters of all methods were comparable. Developed methods for quantification of mesalazine are a viable alternative to other more expensive approaches.

Self-calibrating models for dynamic monitoring and diagnosis

NASA Technical Reports Server (NTRS)

Kuipers, Benjamin

1994-01-01

The present goal in qualitative reasoning is to develop methods for automatically building qualitative and semiquantitative models of dynamic systems and to use them for monitoring and fault diagnosis. The qualitative approach to modeling provides a guarantee of coverage while our semiquantitative methods support convergence toward a numerical model as observations are accumulated. We have developed and applied methods for automatic creation of qualitative models, developed two methods for obtaining tractable results on problems that were previously intractable for qualitative simulation, and developed more powerful methods for learning semiquantitative models from observations and deriving semiquantitative predictions from them. With these advances, qualitative reasoning comes significantly closer to realizing its aims as a practical engineering method.

Method development and qualification of capillary zone electrophoresis for investigation of therapeutic monoclonal antibody quality.

PubMed

Suba, Dávid; Urbányi, Zoltán; Salgó, András

2016-10-01

Capillary electrophoresis techniques are widely used in the analytical biotechnology. Different electrophoretic techniques are very adequate tools to monitor size-and charge heterogenities of protein drugs. Method descriptions and development studies of capillary zone electrophoresis (CZE) have been described in literature. Most of them are performed based on the classical one-factor-at-time (OFAT) approach. In this study a very simple method development approach is described for capillary zone electrophoresis: a "two-phase-four-step" approach is introduced which allows a rapid, iterative method development process and can be a good platform for CZE method. In every step the current analytical target profile and an appropriate control strategy were established to monitor the current stage of development. A very good platform was established to investigate intact and digested protein samples. Commercially available monoclonal antibody was chosen as model protein for the method development study. The CZE method was qualificated after the development process and the results were presented. The analytical system stability was represented by the calculated RSD% value of area percentage and migration time of the selected peaks (<0.8% and <5%) during the intermediate precision investigation. Copyright © 2016 Elsevier B.V. All rights reserved.

Application of geo-information science methods in ecotourism exploitation

NASA Astrophysics Data System (ADS)

Dong, Suocheng; Hou, Xiaoli

2004-11-01

Application of geo-information science methods in ecotourism development was discussed in the article. Since 1990s, geo-information science methods, which take the 3S (Geographic Information System, Global Positioning System, and Remote Sensing) as core techniques, has played an important role in resources reconnaissance, data management, environment monitoring, and regional planning. Geo-information science methods can easily analyze and convert geographic spatial data. The application of 3S methods is helpful to sustainable development in tourism. Various assignments are involved in the development of ecotourism, such as reconnaissance of ecotourism resources, drawing of tourism maps, dealing with mass data, and also tourism information inquire, employee management, quality management of products. The utilization of geo-information methods in ecotourism can make the development more efficient by promoting the sustainable development of tourism and the protection of eco-environment.

Fluorescent Nanomaterials for the Development of Latent Fingerprints in Forensic Sciences

PubMed Central

Li, Ming; Yu, Aoyang; Zhu, Ye

2018-01-01

This review presents an overview on the application of latent fingerprint development techniques in forensic sciences. At present, traditional developing methods such as powder dusting, cyanoacrylate fuming, chemical method, and small particle reagent method, have all been gradually compromised given their emerging drawbacks such as low contrast, sensitivity, and selectivity, as well as high toxicity. Recently, much attention has been paid to the use of fluorescent nanomaterials including quantum dots (QDs) and rare earth upconversion fluorescent nanomaterials (UCNMs) due to their unique optical and chemical properties. Thus, this review lays emphasis on latent fingerprint development based on QDs and UCNMs. Compared to latent fingerprint development by traditional methods, the new methods using fluorescent nanomaterials can achieve high contrast, sensitivity, and selectivity while showing reduced toxicity. Overall, this review provides a systematic overview on such methods. PMID:29657570

[Development and validation of an analytical method to quantify residues of cleaning products able to inactivate prion].

PubMed

Briot, T; Robelet, A; Morin, N; Riou, J; Lelièvre, B; Lebelle-Dehaut, A-V

2016-07-01

In this study, a novel analytical method to quantify prion inactivating detergent in rinsing waters coming from the washer-disinfector of a hospital sterilization unit has been developed. The final aim was to obtain an easy and functional method in a routine hospital process which does not need the cleaning product manufacturer services. An ICP-MS method based on the potassium dosage of the washer-disinfector's rinsing waters was developed. Potassium hydroxide is present on the composition of the three prion inactivating detergent currently on the French market. The detergent used in this study was the Actanios LDI(®) (Anios laboratories). A Passing and Bablok regression compares concentrations measured with this developed method and with the HPLC-UV manufacturer method. According to results obtained, the developed method is easy to use in a routine hospital process. The Passing and Bablok regression showed that there is no statistical difference between the two analytical methods during the second rinsing step. Besides, both methods were linear on the third rinsing step, with a 1.5ppm difference between the concentrations measured for each method. This study shows that the ICP-MS method developed is nonspecific for the detergent, but specific for the potassium element which is present in all prion inactivating detergent currently on the French market. This method should be functional for all the prion inactivating detergent containing potassium, if the sensibility of the method is sufficient when the potassium concentration is very low in the prion inactivating detergent formulation. Copyright © 2016. Published by Elsevier Masson SAS.

A review on detection methods used for foodborne pathogens

PubMed Central

Priyanka, B.; Patil, Rajashekhar K.; Dwarakanath, Sulatha

2016-01-01

Foodborne pathogens have been a cause of a large number of diseases worldwide and more so in developing countries. This has a major economic impact. It is important to contain them, and to do so, early detection is very crucial. Detection and diagnostics relied on culture-based methods to begin with and have developed in the recent past parallel to the developments towards immunological methods such as enzyme-linked immunosorbent assays (ELISA) and molecular biology-based methods such as polymerase chain reaction (PCR). The aim has always been to find a rapid, sensitive, specific and cost-effective method. Ranging from culturing of microbes to the futuristic biosensor technology, the methods have had this common goal. This review summarizes the recent trends and brings together methods that have been developed over the years. PMID:28139531

Jennifer van Rij | NREL

Science.gov Websites

Jennifer.Vanrij@nrel.gov | 303-384-7180 Jennifer's expertise is in developing computational modeling methods for collaboratively developing numerical modeling methods to simulate the hydrodynamic, structural dynamic, power -elastic interactions. Her other diverse work experiences include developing numerical modeling methods for

Developing a reliable signal wire attachment method for rail.

DOT National Transportation Integrated Search

2014-11-01

The goal of this project was to develop a better attachment method for rail signal wires to improve the reliability of signaling : systems. EWI conducted basic research into the failure mode of current attachment methods and developed and tested a ne...

Large-scale structural analysis: The structural analyst, the CSM Testbed and the NAS System

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Mccleary, Susan L.; Macy, Steven C.; Aminpour, Mohammad A.

1989-01-01

The Computational Structural Mechanics (CSM) activity is developing advanced structural analysis and computational methods that exploit high-performance computers. Methods are developed in the framework of the CSM testbed software system and applied to representative complex structural analysis problems from the aerospace industry. An overview of the CSM testbed methods development environment is presented and some numerical methods developed on a CRAY-2 are described. Selected application studies performed on the NAS CRAY-2 are also summarized.

Batch mode grid generation: An endangered species

NASA Technical Reports Server (NTRS)

Schuster, David M.

1992-01-01

Non-interactive grid generation schemes should thrive as emphasis shifts from development of numerical analysis and design methods to application of these tools to real engineering problems. A strong case is presented for the continued development and application of non-interactive geometry modeling methods. Guidelines, strategies, and techniques for developing and implementing these tools are presented using current non-interactive grid generation methods as examples. These schemes play an important role in the development of multidisciplinary analysis methods and some of these applications are also discussed.

Assessment of sustainable urban transport development based on entropy and unascertained measure.

PubMed

Li, Yancang; Yang, Jing; Shi, Huawang; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development.

Computational simulation of concurrent engineering for aerospace propulsion systems

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Singhal, S. N.

1992-01-01

Results are summarized of an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulations methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties - fundamental in developing such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering for propulsion systems and systems in general. Benefits and facets needing early attention in the development are outlined.

Computational simulation for concurrent engineering of aerospace propulsion systems

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Singhal, S. N.

1993-01-01

Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined.

Computational simulation for concurrent engineering of aerospace propulsion systems

NASA Astrophysics Data System (ADS)

Chamis, C. C.; Singhal, S. N.

1993-02-01

Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined.

Development of quality assurance methods for epoxy graphite prepreg

NASA Technical Reports Server (NTRS)

Chen, J. S.; Hunter, A. B.

1982-01-01

Quality assurance methods for graphite epoxy/prepregs were developed. Liquid chromatography, differential scanning calorimetry, and gel permeation chromatography were investigated. These methods were applied to a second prepreg system. The resin matrix formulation was correlated with mechanical properties. Dynamic mechanical analysis and fracture toughness methods were investigated. The chromatography and calorimetry techniques were all successfully developed as quality assurance methods for graphite epoxy prepregs. The liquid chromatography method was the most sensitive to changes in resin formulation. The were also successfully applied to the second prepreg system.

The use of qualitative methods in developing the descriptive systems of preference-based measures of health-related quality of life for use in economic evaluation.

PubMed

Stevens, Katherine; Palfreyman, Simon

2012-12-01

To describe how qualitative methods can be used in the development of descriptive systems of preference-based measures (PBMs) of health-related quality of life. The requirements of the National Institute for Health and Clinical Excellence and other agencies together with the increasing use of patient-reported outcome measures has led to an increase in the demand for PBMs. Recently, interest has grown in developing new PBMs and while previous research on PBMs has mainly focused on the methods of valuation, research into the methods of developing descriptive systems is an emerging field. Traditionally, descriptive systems of PBMs were developed by using top-down methods, where content was derived from existing measures, the literature, or health surveys. A contrasting approach is a bottom-up methodology, which takes the views of patients or laypeople on how their life is affected by their health. This approach generally requires the use of qualitative methods. Qualitative methods lend themselves well to the development of PBMs. They also ensure that the measure has appropriate language, content validity, and responsiveness to change. While the use of qualitative methods in the development of non-PBMs is fairly standard, their use in developing PBMs was until recently nonexistent. In this article, we illustrate the use of qualitative methods by presenting two case studies of recently developed PBMs, one generic and one condition specific. We outline the stages involved, discuss the strengths and weaknesses of the approach, and compare with the top-down approach used in the majority of PBMs to date. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Generation and application of the equations of condition for high order Runge-Kutta methods

NASA Technical Reports Server (NTRS)

Haley, D. C.

1972-01-01

This thesis develops the equations of condition necessary for determining the coefficients for Runge-Kutta methods used in the solution of ordinary differential equations. The equations of condition are developed for Runge-Kutta methods of order four through order nine. Once developed, these equations are used in a comparison of the local truncation errors for several sets of Runge-Kutta coefficients for methods of order three up through methods of order eight.

Tracking maize pollen development by the Leaf Collar Method.

PubMed

Begcy, Kevin; Dresselhaus, Thomas

2017-12-01

An easy and highly reproducible nondestructive method named the Leaf Collar Method is described to identify and characterize the different stages of pollen development in maize. In plants, many cellular events such as meiosis, asymmetric cell division, cell cycle regulation, cell fate determination, nucleus movement, vacuole formation, chromatin condensation and epigenetic modifications take place during pollen development. In maize, pollen development occurs in tassels that are confined within the internal stalk of the plant. Hence, identification of the different pollen developmental stages as a tool to investigate above biological processes is impossible without dissecting the entire plant. Therefore, an efficient and reproducible method is necessary to isolate homogeneous cell populations at individual stages throughout pollen development without destroying the plant. Here, we describe a method to identify the various stages of pollen development in maize. Using the Leaf Collar Method in the maize inbreed line B73, we have determined the duration of each stage from pollen mother cells before meiosis to mature tricellular pollen. Anther and tassel size as well as percentage of pollen stages were correlated with vegetative stages, which are easily recognized. The identification of stage-specific genes indicates the reproducibility of the method. In summary, we present an easy and highly reproducible nondestructive method to identify and characterize the different stages of pollen development in maize. This method now opens the way for many subsequent physiological, morphological and molecular analyses to study, for instance, transcriptomics, metabolomics, DNA methylation and chromatin patterns during normal and stressful conditions throughout pollen development in one of the economically most important grass species.

Multi-criteria decision making development of ion chromatographic method for determination of inorganic anions in oilfield waters based on artificial neural networks retention model.

PubMed

Stefanović, Stefica Cerjan; Bolanča, Tomislav; Luša, Melita; Ukić, Sime; Rogošić, Marko

2012-02-24

This paper describes the development of ad hoc methodology for determination of inorganic anions in oilfield water, since their composition often significantly differs from the average (concentration of components and/or matrix). Therefore, fast and reliable method development has to be performed in order to ensure the monitoring of desired properties under new conditions. The method development was based on computer assisted multi-criteria decision making strategy. The used criteria were: maximal value of objective functions used, maximal robustness of the separation method, minimal analysis time, and maximal retention distance between two nearest components. Artificial neural networks were used for modeling of anion retention. The reliability of developed method was extensively tested by the validation of performance characteristics. Based on validation results, the developed method shows satisfactory performance characteristics, proving the successful application of computer assisted methodology in the described case study. Copyright © 2011 Elsevier B.V. All rights reserved.

Using mixed methods to develop and evaluate complex interventions in palliative care research.

PubMed

Farquhar, Morag C; Ewing, Gail; Booth, Sara

2011-12-01

there is increasing interest in combining qualitative and quantitative research methods to provide comprehensiveness and greater knowledge yield. Mixed methods are valuable in the development and evaluation of complex interventions. They are therefore particularly valuable in palliative care research where the majority of interventions are complex, and the identification of outcomes particularly challenging. this paper aims to introduce the role of mixed methods in the development and evaluation of complex interventions in palliative care, and how they may be used in palliative care research. the paper defines mixed methods and outlines why and how mixed methods are used to develop and evaluate complex interventions, with a pragmatic focus on design and data collection issues and data analysis. Useful texts are signposted and illustrative examples provided of mixed method studies in palliative care, including a detailed worked example of the development and evaluation of a complex intervention in palliative care for breathlessness. Key challenges to conducting mixed methods in palliative care research are identified in relation to data collection, data integration in analysis, costs and dissemination and how these might be addressed. the development and evaluation of complex interventions in palliative care benefit from the application of mixed methods. Mixed methods enable better understanding of whether and how an intervention works (or does not work) and inform the design of subsequent studies. However, they can be challenging: mixed method studies in palliative care will benefit from working with agreed protocols, multidisciplinary teams and engaging staff with appropriate skill sets.

Quantitative estimation of itopride hydrochloride and rabeprazole sodium from capsule formulation.

PubMed

Pillai, S; Singhvi, I

2008-09-01

Two simple, accurate, economical and reproducible UV spectrophotometric methods and one HPLC method for simultaneous estimation of two component drug mixture of itopride hydrochloride and rabeprazole sodium from combined capsule dosage form have been developed. First developed method involves formation and solving of simultaneous equations using 265.2 nm and 290.8 nm as two wavelengths. Second method is based on two wavelength calculation, wavelengths selected for estimation of itopride hydrochloride was 278.0 nm and 298.8 nm and for rabeprazole sodium 253.6 nm and 275.2 nm. Developed HPLC method is a reverse phase chromatographic method using phenomenex C(18) column and acetonitrile: phosphate buffer (35:65 v/v) pH 7.0 as mobile phase. All developed methods obey Beer's law in concentration range employed for respective methods. Results of analysis were validated statistically and by recovery studies.

Quantitative Estimation of Itopride Hydrochloride and Rabeprazole Sodium from Capsule Formulation

PubMed Central

Pillai, S.; Singhvi, I.

2008-01-01

Two simple, accurate, economical and reproducible UV spectrophotometric methods and one HPLC method for simultaneous estimation of two component drug mixture of itopride hydrochloride and rabeprazole sodium from combined capsule dosage form have been developed. First developed method involves formation and solving of simultaneous equations using 265.2 nm and 290.8 nm as two wavelengths. Second method is based on two wavelength calculation, wavelengths selected for estimation of itopride hydrochloride was 278.0 nm and 298.8 nm and for rabeprazole sodium 253.6 nm and 275.2 nm. Developed HPLC method is a reverse phase chromatographic method using phenomenex C18 column and acetonitrile: phosphate buffer (35:65 v/v) pH 7.0 as mobile phase. All developed methods obey Beer's law in concentration range employed for respective methods. Results of analysis were validated statistically and by recovery studies. PMID:21394269

Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians

DTIC Science & Technology

2004-04-15

Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians SERDP Project # CP-1251...2004 4. TITLE AND SUBTITLE Developing Molecular Methods to Identify and Quantify Ballast Water Organisms: A Test Case with Cnidarians 5a. CONTRACT... cnidarians ? 9 Indicators of ballast water exchange 9 Materials and Methods 11 Phase I. Specimens 11 DNA

Method for technology-delivered healthcare measures.

PubMed

Kramer-Jackman, Kelli Lee; Popkess-Vawter, Sue

2011-12-01

Current healthcare literature lacks development and evaluation methods for research and practice measures administered by technology. Researchers with varying levels of informatics experience are developing technology-delivered measures because of the numerous advantages they offer. Hasty development of technology-delivered measures can present issues that negatively influence administration and psychometric properties. The Method for Technology-delivered Healthcare Measures is designed to systematically guide the development and evaluation of technology-delivered measures. The five-step Method for Technology-delivered Healthcare Measures includes establishment of content, e-Health literacy, technology delivery, expert usability, and participant usability. Background information and Method for Technology-delivered Healthcare Measures steps are detailed.

[Development of selective determination methods for quinones with fluorescence and chemiluminescence detection and their application to environmental and biological samples].

PubMed

Kishikawa, Naoya

2010-10-01

Quinones are compounds that have various characteristics such as a biological electron transporter, an industrial product and a harmful environmental pollutant. Therefore, an effective determination method for quinones is required in many fields. This review describes the development of sensitive and selective determination methods for quinones based on some detection principles and their application to analyses in environmental, pharmaceutical and biological samples. Firstly, a fluorescence method was developed based on fluorogenic derivatization of quinones and applied to environmental analysis. Secondly, a luminol chemiluminescence method was developed based on generation of reactive oxygen species through the redox cycle of quinone and applied to pharmaceutical analysis. Thirdly, a photo-induced chemiluminescence method was developed based on formation of reactive oxygen species and fluorophore or chemiluminescence enhancer by the photoreaction of quinones and applied to biological and environmental analyses.

What Touched Your Heart? Collaborative Story Analysis Emerging From an Apsáalooke Cultural Context.

PubMed

Hallett, John; Held, Suzanne; McCormick, Alma Knows His Gun; Simonds, Vanessa; Real Bird, Sloane; Martin, Christine; Simpson, Colleen; Schure, Mark; Turnsplenty, Nicole; Trottier, Coleen

2017-07-01

Community-based participatory research and decolonizing research share some recommendations for best practices for conducting research. One commonality is partnering on all stages of research; co-developing methods of data analysis is one stage with a deficit of partnering examples. We present a novel community-based and developed method for analyzing qualitative data within an Indigenous health study and explain incompatibilities of existing methods for our purposes and community needs. We describe how we explored available literature, received counsel from community Elders and experts in the field, and collaboratively developed a data analysis method consonant with community values. The method of analysis, in which interview/story remained intact, team members received story, made meaning through discussion, and generated a conceptual framework to inform intervention development, is detailed. We offer the development process and method as an example for researchers working with communities who want to keep stories intact during qualitative data analysis.

24 CFR 203.400 - Method of payment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Method of payment. 203.400 Section 203.400 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... FAMILY MORTGAGE INSURANCE Contract Rights and Obligations Payment of Insurance Benefits § 203.400 Method...

24 CFR 203.400 - Method of payment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Method of payment. 203.400 Section 203.400 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... FAMILY MORTGAGE INSURANCE Contract Rights and Obligations Payment of Insurance Benefits § 203.400 Method...

RECENT DEVELOPMENTS IN ANALYTICAL METHODS FOR FIBROUS AMPHIBOLE IN VERMICULITE ATTIC INSULATION

EPA Science Inventory

The U.S. Environmental Protection Agency has developed a test method for the analysis of fibrous amphibole in vermiculite attic insulation. This method was developed to provide the Agency with monitoring tools to study the occurrence and potential for exposure to fibrous amphibo...

SW-846 Method Style Guide

EPA Pesticide Factsheets

This style guide is for use by developers of new methods for SW-846 and editors of existing SW-846 methods. Its use will help assure consistent method format and minimize editorial errors during the development and maintenance of SW-846.

Recent trends related to the use of formal methods in software engineering

NASA Technical Reports Server (NTRS)

Prehn, Soren

1986-01-01

An account is given of some recent developments and trends related to the development and use of formal methods in software engineering. Ongoing activities in Europe are focussed on, since there seems to be a notable difference in attitude towards industrial usage of formal methods in Europe and in the U.S. A more detailed account is given of the currently most widespread formal method in Europe: the Vienna Development Method. Finally, the use of Ada is discussed in relation to the application of formal methods, and the potential for constructing Ada-specific tools based on that method is considered.

24 CFR 241.1050 - Method of loan payment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Method of loan payment. 241.1050 Section 241.1050 Housing and Urban Development Regulations Relating to Housing and Urban Development...-Eligibility Requirements § 241.1050 Method of loan payment. The loan shall provide for monthly payments on the...

24 CFR 241.1050 - Method of loan payment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Method of loan payment. 241.1050 Section 241.1050 Housing and Urban Development Regulations Relating to Housing and Urban Development...-Eligibility Requirements § 241.1050 Method of loan payment. The loan shall provide for monthly payments on the...

Development of a benchtop baking method for chemically leavened crackers. II. Validation of the method

USDA-ARS?s Scientific Manuscript database

A benchtop baking method has been developed to predict the contribution of gluten functionality to overall flour performance for chemically leavened crackers. Using a diagnostic formula and procedure, dough rheology was analyzed to evaluate the extent of gluten development during mixing and machinin...

INDOOR AIR EMISSIONS FROM OFFICE EQUIPMENT: TEST METHOD DEVELOPMENT AND POLLUTION PREVENTION OPPORTUNITIES

EPA Science Inventory

The report describes the development and evaluation of a large chamber test method for measuring emissions from dry-process photocopiers. The test method was developed in two phases. Phase 1 was a single-laboratory evaluation at Research Triangle Institute (RTI) using four, mid-r...

A scheduling algorithm for Spacelab telescope observations

NASA Technical Reports Server (NTRS)

Grone, B.

1982-01-01

An algorithm is developed for sequencing and scheduling of observations of stellar targets by equipment on Spacelab. The method is a general one. The scheduling problem is defined and examined. The method developed for its solution is documented. Suggestions for further development and implementation of this method are made.

Computational Methods Development at Ames

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Smith, Charles A. (Technical Monitor)

1998-01-01

This viewgraph presentation outlines the development at Ames Research Center of advanced computational methods to provide appropriate fidelity computational analysis/design capabilities. Current thrusts of the Ames research include: 1) methods to enhance/accelerate viscous flow simulation procedures, and the development of hybrid/polyhedral-grid procedures for viscous flow; 2) the development of real time transonic flow simulation procedures for a production wind tunnel, and intelligent data management technology; and 3) the validation of methods and the flow physics study gives historical precedents to above research, and speculates on its future course.

Multishaker modal testing

NASA Technical Reports Server (NTRS)

Craig, R. R., Jr.

1985-01-01

A component mode synthesis method for damped structures was developed and modal test methods were explored which could be employed to determine the relevant parameters required by the component mode synthesis method. Research was conducted on the following topics: (1) Development of a generalized time-domain component mode synthesis technique for damped systems; (2) Development of a frequency-domain component mode synthesis method for damped systems; and (3) Development of a system identification algorithm applicable to general damped systems. Abstracts are presented of the major publications which have been previously issued on these topics.

An Evaluation Method of Equipment Reliability Configuration Management

NASA Astrophysics Data System (ADS)

Wang, Wei; Feng, Weijia; Zhang, Wei; Li, Yuan

2018-01-01

At present, many equipment development companies have been aware of the great significance of reliability of the equipment development. But, due to the lack of effective management evaluation method, it is very difficult for the equipment development company to manage its own reliability work. Evaluation method of equipment reliability configuration management is to determine the reliability management capabilities of equipment development company. Reliability is not only designed, but also managed to achieve. This paper evaluates the reliability management capabilities by reliability configuration capability maturity model(RCM-CMM) evaluation method.

HPLC method development for evolving applications in the pharmaceutical industry and nanoscale chemistry

NASA Astrophysics Data System (ADS)

Castiglione, Steven Louis

As scientific research trends towards trace levels and smaller architectures, the analytical chemist is often faced with the challenge of quantitating said species in a variety of matricies. The challenge is heightened when the analytes prove to be potentially toxic or possess physical or chemical properties that make traditional analytical methods problematic. In such cases, the successful development of an acceptable quantitative method plays a critical role in the ability to further develop the species under study. This is particularly true for pharmaceutical impurities and nanoparticles (NP). The first portion of the research focuses on the development of a part-per-billion level HPLC method for a substituted phenazine-class pharmaceutical impurity. The development of this method was required due to the need for a rapid methodology to quantitatively determine levels of a potentially toxic phenazine moiety in order to ensure patient safety. As the synthetic pathway for the active ingredient was continuously refined to produce progressively lower amounts of the phenazine impurity, the approach for increasingly sensitive quantitative methods was required. The approaches evolved across four discrete methods, each employing a unique scheme for analyte detection. All developed methods were evaluated with regards to accuracy, precision and linear adherence as well as ancillary benefits and detriments -- e.g., one method in this evolution demonstrated the ability to resolve and detect other species from the phenazine class. The second portion of the research focuses on the development of an HPLC method for the quantitative determination of NP size distributions. The current methodology for the determination of NP sizes employs tunneling electron microscopy (TEM), which requires sample drying without particle size alteration and which, in many cases, may prove infeasible due to cost or availability. The feasibility of an HPLC method for NP size characterizations evolved across three methods, each employing a different approach for size resolution. These methods were evaluated primarily for sensitivity, which proved to be a substantial hurdle to further development, but does not appear to deter future research efforts.

Method Development and Monitoring of Cyanotoxins in Water

EPA Science Inventory

This presentation describes method development of two ambient water LC/MS/MS methods for microcystins, cylindrospermopsin and anatoxin-a. Ruggedness of the methods will be demonstrated by evaluation of quality control samples derived from various water bodies across the country.

The Development of the Navigation System for Visually Impaired Persons

DTIC Science & Technology

2001-10-25

method) is used in our system. In this papaer , we re- fer to the developed methods which are the positioning method without DGPS and the method of the...University Kanagawa, Japan Performing Organization Report Number Sponsoring/Monitoring Agency Name(s) and Address(es) US Army Research , Development...impaired. ACKNOWLEDGMENT This research was partially supported by the Ministry of Education, Science, Sports and Culture, Grant-in-Aid for Scienti c

Nanoparticle-assisted laser desorption/ionization mass spectrometry: Novel sample preparation methods and nanoparticle screening for plant metabolite imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yagnik, Gargey B.

The main goal of the presented research is development of nanoparticle based matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS). This dissertation includes the application of previously developed data acquisition methods, development of novel sample preparation methods, application and comparison of novel nanoparticle matrices, and comparison of two nanoparticle matrix application methods for MALDI-MS and MALDI-MS imaging.

Flexible methods for segmentation evaluation: results from CT-based luggage screening.

PubMed

Karimi, Seemeen; Jiang, Xiaoqian; Cosman, Pamela; Martz, Harry

2014-01-01

Imaging systems used in aviation security include segmentation algorithms in an automatic threat recognition pipeline. The segmentation algorithms evolve in response to emerging threats and changing performance requirements. Analysis of segmentation algorithms' behavior, including the nature of errors and feature recovery, facilitates their development. However, evaluation methods from the literature provide limited characterization of the segmentation algorithms. To develop segmentation evaluation methods that measure systematic errors such as oversegmentation and undersegmentation, outliers, and overall errors. The methods must measure feature recovery and allow us to prioritize segments. We developed two complementary evaluation methods using statistical techniques and information theory. We also created a semi-automatic method to define ground truth from 3D images. We applied our methods to evaluate five segmentation algorithms developed for CT luggage screening. We validated our methods with synthetic problems and an observer evaluation. Both methods selected the same best segmentation algorithm. Human evaluation confirmed the findings. The measurement of systematic errors and prioritization helped in understanding the behavior of each segmentation algorithm. Our evaluation methods allow us to measure and explain the accuracy of segmentation algorithms.

Valid methods: the quality assurance of test method development, validation, approval, and transfer for veterinary testing laboratories.

PubMed

Wiegers, Ann L

2003-07-01

Third-party accreditation is a valuable tool to demonstrate a laboratory's competence to conduct testing. Accreditation, internationally and in the United States, has been discussed previously. However, accreditation is only I part of establishing data credibility. A validated test method is the first component of a valid measurement system. Validation is defined as confirmation by examination and the provision of objective evidence that the particular requirements for a specific intended use are fulfilled. The international and national standard ISO/IEC 17025 recognizes the importance of validated methods and requires that laboratory-developed methods or methods adopted by the laboratory be appropriate for the intended use. Validated methods are therefore required and their use agreed to by the client (i.e., end users of the test results such as veterinarians, animal health programs, and owners). ISO/IEC 17025 also requires that the introduction of methods developed by the laboratory for its own use be a planned activity conducted by qualified personnel with adequate resources. This article discusses considerations and recommendations for the conduct of veterinary diagnostic test method development, validation, evaluation, approval, and transfer to the user laboratory in the ISO/IEC 17025 environment. These recommendations are based on those of nationally and internationally accepted standards and guidelines, as well as those of reputable and experienced technical bodies. They are also based on the author's experience in the evaluation of method development and transfer projects, validation data, and the implementation of quality management systems in the area of method development.

REGIONAL ASSESSMENT OF WETLAND ECOLOGICAL CONDITION -- ISSUES AND CHALLENGES

EPA Science Inventory

Most work on wetland assessment has focused on the development of methods, however, effective assessment involves more than having a method. In a 2004 review of rapid assessment methods, Fennessey et al. recommended key considerations when adopting existing methods or developing...

RESEARCH ASSOCIATED WITH THE DEVELOPMENT OF EPA METHOD 552.2

EPA Science Inventory

The work presented in this paper entails the development of a method for haloacetic acid (HAA) analysis, Environmental Protection Agency (EPA)method 552.2, that improves the saftey and efficiency of previous methods and incorporates three additional trihalogenated acetic acids: b...

Assessment of sustainable urban transport development based on entropy and unascertained measure

PubMed Central

Li, Yancang; Yang, Jing; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development. PMID:29084281

Mending the Gap, An Effort to Aid the Transfer of Formal Methods Technology

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly

2009-01-01

Formal methods can be applied to many of the development and verification activities required for civil avionics software. RTCA/DO-178B, Software Considerations in Airborne Systems and Equipment Certification, gives a brief description of using formal methods as an alternate method of compliance with the objectives of that standard. Despite this, the avionics industry at large has been hesitant to adopt formal methods, with few developers have actually used formal methods for certification credit. Why is this so, given the volume of evidence of the benefits of formal methods? This presentation will explore some of the challenges to using formal methods in a certification context and describe the effort by the Formal Methods Subgroup of RTCA SC-205/EUROCAE WG-71 to develop guidance to make the use of formal methods a recognized approach.

An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

NASA Astrophysics Data System (ADS)

Wang, Yue; Gao, Dan; Mao, Xuming

2018-03-01

A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

Perspective: Quantum mechanical methods in biochemistry and biophysics.

PubMed

Cui, Qiang

2016-10-14

In this perspective article, I discuss several research topics relevant to quantum mechanical (QM) methods in biophysical and biochemical applications. Due to the immense complexity of biological problems, the key is to develop methods that are able to strike the proper balance of computational efficiency and accuracy for the problem of interest. Therefore, in addition to the development of novel ab initio and density functional theory based QM methods for the study of reactive events that involve complex motifs such as transition metal clusters in metalloenzymes, it is equally important to develop inexpensive QM methods and advanced classical or quantal force fields to describe different physicochemical properties of biomolecules and their behaviors in complex environments. Maintaining a solid connection of these more approximate methods with rigorous QM methods is essential to their transferability and robustness. Comparison to diverse experimental observables helps validate computational models and mechanistic hypotheses as well as driving further development of computational methodologies.

Best Practices in Stability Indicating Method Development and Validation for Non-clinical Dose Formulations.

PubMed

Henry, Teresa R; Penn, Lara D; Conerty, Jason R; Wright, Francesca E; Gorman, Gregory; Pack, Brian W

2016-11-01

Non-clinical dose formulations (also known as pre-clinical or GLP formulations) play a key role in early drug development. These formulations are used to introduce active pharmaceutical ingredients (APIs) into test organisms for both pharmacokinetic and toxicological studies. Since these studies are ultimately used to support dose and safety ranges in human studies, it is important to understand not only the concentration and PK/PD of the active ingredient but also to generate safety data for likely process impurities and degradation products of the active ingredient. As such, many in the industry have chosen to develop and validate methods which can accurately detect and quantify the active ingredient along with impurities and degradation products. Such methods often provide trendable results which are predictive of stability, thus leading to the name; stability indicating methods. This document provides an overview of best practices for those choosing to include development and validation of such methods as part of their non-clinical drug development program. This document is intended to support teams who are either new to stability indicating method development and validation or who are less familiar with the requirements of validation due to their position within the product development life cycle.

The development of a post-mortem interval estimation for human remains found on land in the Netherlands.

PubMed

Gelderman, H T; Boer, L; Naujocks, T; IJzermans, A C M; Duijst, W L J M

2018-05-01

The decomposition process of human remains can be used to estimate the post-mortem interval (PMI), but decomposition varies due to many factors. Temperature is believed to be the most important and can be connected to decomposition by using the accumulated degree days (ADD). The aim of this research was to develop a decomposition scoring method and to develop a formula to estimate the PMI by using the developed decomposition scoring method and ADD.A decomposition scoring method and a Book of Reference (visual resource) were made. Ninety-one cases were used to develop a method to estimate the PMI. The photographs were scored using the decomposition scoring method. The temperature data was provided by the Royal Netherlands Meteorological Institute. The PMI was estimated using the total decomposition score (TDS) and using the TDS and ADD. The latter required an additional step, namely to calculate the ADD from the finding date back until the predicted day of death.The developed decomposition scoring method had a high interrater reliability. The TDS significantly estimates the PMI (R 2  = 0.67 and 0.80 for indoor and outdoor bodies, respectively). When using the ADD, the R 2 decreased to 0.66 and 0.56.The developed decomposition scoring method is a practical method to measure decomposition for human remains found on land. The PMI can be estimated using this method, but caution is advised in cases with a long PMI. The ADD does not account for all the heat present in a decomposing remain and is therefore a possible bias.

Emerging Patterns of Abstraction in Environmental Education: A Review of Materials, Methods and Professional Development Perspectives

ERIC Educational Resources Information Center

O'Donoghue, Rob; Russo, Vladimir

2004-01-01

This paper examines how emerging materials and associated methods became inscribed within and have shaped developing patterns of practice in environmental education. In so doing, it gives attention to how materials and methods have informed methodological narratives and shaped abstracted propositions used in professional development activities.…

The Formation Experiment in the Age of Hypermedia and Distance Learning

ERIC Educational Resources Information Center

Giest, Hartmut

2004-01-01

Searching for an adequate method to investigate human development (especially the development of theoretical thinking) Vygotsky and his collaborators developed the causal genetic method. The basic idea of this method consists in the investigation of psychic functions and structures by their formation under controlled conditions (for instance via a…

Application of LC/MS/MS Techniques to Development of US EPA Standardized Methods for Chemicals of Emerging Concern

EPA Science Inventory

This presentation will describe the U.S. EPA’s drinking water and ambient water method development program in relation to the process employed and the typical challenges encountered in developing standardized LC/MS/MS methods for chemicals of emerging concern. The EPA&rsquo...

An active role for machine learning in drug development

PubMed Central

Murphy, Robert F.

2014-01-01

Due to the complexity of biological systems, cutting-edge machine-learning methods will be critical for future drug development. In particular, machine-vision methods to extract detailed information from imaging assays and active-learning methods to guide experimentation will be required to overcome the dimensionality problem in drug development. PMID:21587249

Final Report for X-ray Diffraction Sample Preparation Method Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ely, T. M.; Meznarich, H. K.; Valero, T.

WRPS-1500790, “X-ray Diffraction Saltcake Sample Preparation Method Development Plan/Procedure,” was originally prepared with the intent of improving the specimen preparation methodology used to generate saltcake specimens suitable for XRD-based solid phase characterization. At the time that this test plan document was originally developed, packed powder in cavity supports with collodion binder was the established XRD specimen preparation method. An alternate specimen preparation method less vulnerable, if not completely invulnerable to preferred orientation effects, was desired as a replacement for the method.

[A reliability growth assessment method and its application in the development of equipment in space cabin].

PubMed

Chen, J D; Sun, H L

1999-04-01

Objective. To assess and predict reliability of an equipment dynamically by making full use of various test informations in the development of products. Method. A new reliability growth assessment method based on army material system analysis activity (AMSAA) model was developed. The method is composed of the AMSAA model and test data conversion technology. Result. The assessment and prediction results of a space-borne equipment conform to its expectations. Conclusion. It is suggested that this method should be further researched and popularized.

Discovery of new candidate genes related to brain development using protein interaction information.

PubMed

Chen, Lei; Chu, Chen; Kong, Xiangyin; Huang, Tao; Cai, Yu-Dong

2015-01-01

Human brain development is a dramatic process composed of a series of complex and fine-tuned spatiotemporal gene expressions. A good comprehension of this process can assist us in developing the potential of our brain. However, we have only limited knowledge about the genes and gene functions that are involved in this biological process. Therefore, a substantial demand remains to discover new brain development-related genes and identify their biological functions. In this study, we aimed to discover new brain-development related genes by building a computational method. We referred to a series of computational methods used to discover new disease-related genes and developed a similar method. In this method, the shortest path algorithm was executed on a weighted graph that was constructed using protein-protein interactions. New candidate genes fell on at least one of the shortest paths connecting two known genes that are related to brain development. A randomization test was then adopted to filter positive discoveries. Of the final identified genes, several have been reported to be associated with brain development, indicating the effectiveness of the method, whereas several of the others may have potential roles in brain development.

76 FR 9534 - Development of Technical Guidelines and Scientific Methods for Quantifying GHG Emissions and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... DEPARTMENT OF AGRICULTURE Development of Technical Guidelines and Scientific Methods for... technical guidelines and scientific methods for quantifying greenhouse gas (GHG) emissions and carbon...-based methods to measure the carbon benefits from conservation and land management activities. In...

Antimicrobial Testing Methods & Procedures Developed by EPA's Microbiology Laboratory

EPA Pesticide Factsheets

We develop antimicrobial testing methods and standard operating procedures to measure the effectiveness of hard surface disinfectants against a variety of microorganisms. Find methods and procedures for antimicrobial testing.

Rehabilitation centers in change: participatory methods for managing redesign and renovation.

PubMed

Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

2014-01-01

The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

Flexible methods for segmentation evaluation: Results from CT-based luggage screening

PubMed Central

Karimi, Seemeen; Jiang, Xiaoqian; Cosman, Pamela; Martz, Harry

2017-01-01

BACKGROUND Imaging systems used in aviation security include segmentation algorithms in an automatic threat recognition pipeline. The segmentation algorithms evolve in response to emerging threats and changing performance requirements. Analysis of segmentation algorithms’ behavior, including the nature of errors and feature recovery, facilitates their development. However, evaluation methods from the literature provide limited characterization of the segmentation algorithms. OBJECTIVE To develop segmentation evaluation methods that measure systematic errors such as oversegmentation and undersegmentation, outliers, and overall errors. The methods must measure feature recovery and allow us to prioritize segments. METHODS We developed two complementary evaluation methods using statistical techniques and information theory. We also created a semi-automatic method to define ground truth from 3D images. We applied our methods to evaluate five segmentation algorithms developed for CT luggage screening. We validated our methods with synthetic problems and an observer evaluation. RESULTS Both methods selected the same best segmentation algorithm. Human evaluation confirmed the findings. The measurement of systematic errors and prioritization helped in understanding the behavior of each segmentation algorithm. CONCLUSIONS Our evaluation methods allow us to measure and explain the accuracy of segmentation algorithms. PMID:24699346

Study of swelling behavior in ArF resist during development by the QCM method (3): observations of swelling layer elastic modulus

NASA Astrophysics Data System (ADS)

Sekiguchi, Atsushi

2013-03-01

The QCM method allows measurements of impedance, an index of swelling layer viscosity in a photoresist during development. While impedance is sometimes used as a qualitative index of change in the viscosity of the swelling layer, it has to date not been used quantitatively, for data analysis. We explored a method for converting impedance values to elastic modulus (Pa), a coefficient expressing viscosity. Applying this method, we compared changes in the viscosity of the swelling layer in an ArF resist generated during development in a TMAH developing solution and in a TBAH developing solution. This paper reports the results of this comparative study.

Systematic evaluation of non-animal test methods for skin sensitisation safety assessment.

PubMed

Reisinger, Kerstin; Hoffmann, Sebastian; Alépée, Nathalie; Ashikaga, Takao; Barroso, Joao; Elcombe, Cliff; Gellatly, Nicola; Galbiati, Valentina; Gibbs, Susan; Groux, Hervé; Hibatallah, Jalila; Keller, Donald; Kern, Petra; Klaric, Martina; Kolle, Susanne; Kuehnl, Jochen; Lambrechts, Nathalie; Lindstedt, Malin; Millet, Marion; Martinozzi-Teissier, Silvia; Natsch, Andreas; Petersohn, Dirk; Pike, Ian; Sakaguchi, Hitoshi; Schepky, Andreas; Tailhardat, Magalie; Templier, Marie; van Vliet, Erwin; Maxwell, Gavin

2015-02-01

The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has defined a three-phase framework for the development of a non-animal testing strategy for skin sensitization potency prediction. The results of the first phase – systematic evaluation of 16 test methods – are presented here. This evaluation involved generation of data on a common set of ten substances in all methods and systematic collation of information including the level of standardisation, existing test data,potential for throughput, transferability and accessibility in cooperation with the test method developers.A workshop was held with the test method developers to review the outcome of this evaluation and to discuss the results. The evaluation informed the prioritisation of test methods for the next phase of the non-animal testing strategy development framework. Ultimately, the testing strategy – combined with bioavailability and skin metabolism data and exposure consideration – is envisaged to allow establishment of a data integration approach for skin sensitisation safety assessment of cosmetic ingredients.

A Triangulation Method for Identifying Hydrostratigraphic Locations of Well Screens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whiteside, T. S.

2015-01-31

A method to identify the hydrostratigraphic location of well screens was developed using triangulation with known locations. This method was applied to all of the monitor wells being used to develop the new GSA groundwater model. Results from this method are closely aligned with those from an alternate method which uses a mesh surface.

Four Methods for Completing the Conceptual Development Phase of Applied Theory Building Research in HRD

ERIC Educational Resources Information Center

Storberg-Walker, Julia; Chermack, Thomas J.

2007-01-01

The purpose of this article is to describe four methods for completing the conceptual development phase of theory building research for single or multiparadigm research. The four methods selected for this review are (1) Weick's method of "theorizing as disciplined imagination" (1989); (2) Whetten's method of "modeling as theorizing" (2002); (3)…

Integral method for the calculation of three-dimensional, laminar and turbulent boundary layers

NASA Technical Reports Server (NTRS)

Stock, H. W.

1978-01-01

The method for turbulent flows is a further development of an existing method; profile families with two parameters and a lag entrainment method replace the simple entrainment method and power profiles with one parameter. The method for laminar flows is a new development. Moment of momentum equations were used for the solution of the problem, the profile families were derived from similar solutions of boundary layer equations. Laminar and turbulent flows at the wings were calculated. The influence of wing tapering on the boundary layer development was shown. The turbulent boundary layer for a revolution ellipsoid is calculated for 0 deg and 10 deg incidence angles.

What Touched Your Heart? Collaborative Story Analysis Emerging From an Apsáalooke Cultural Context

PubMed Central

Hallett, John; Held, Suzanne; McCormick, Alma Knows His Gun; Simonds, Vanessa; Bird, Sloane Real; Martin, Christine; Simpson, Colleen; Schure, Mark; Turnsplenty, Nicole; Trottier, Coleen

2017-01-01

Community-based participatory research and decolonizing research share some recommendations for best practices for conducting research. One commonality is partnering on all stages of research; co-developing methods of data analysis is one stage with a deficit of partnering examples. We present a novel community-based and developed method for analyzing qualitative data within an Indigenous health study and explain incompatibilities of existing methods for our purposes and community needs. We describe how we explored available literature, received counsel from community Elders and experts in the field, and collaboratively developed a data analysis method consonant with community values. The method of analysis, in which interview/story remained intact, team members received story, made meaning through discussion, and generated a conceptual framework to inform intervention development, is detailed. We offer the development process and method as an example for researchers working with communities who want to keep stories intact during qualitative data analysis. PMID:27659019