Application of an Original Wildfire Smoke Health Cost Benefits Transfer Protocol to the Western US, 2005-2015

NASA Astrophysics Data System (ADS)

Jones, Benjamin A.; Berrens, Robert P.

2017-11-01

Recent growth in the frequency and severity of US wildfires has led to more wildfire smoke and increased public exposure to harmful air pollutants. Populations exposed to wildfire smoke experience a variety of negative health impacts, imposing economic costs on society. However, few estimates of smoke health costs exist and none for the entire Western US, in particular, which experiences some of the largest and most intense wildfires in the US. The lack of cost estimates is troublesome because smoke health impacts are an important consideration of the overall costs of wildfire. To address this gap, this study provides the first time series estimates of PM2.5 smoke costs across mortality and several morbidity measures for the Western US over 2005-2015. This time period includes smoke from several megafires and includes years of record-breaking acres burned. Smoke costs are estimated using a benefits transfer protocol developed for contexts when original health data are not available. The novelty of our protocol is that it synthesizes the literature on choices faced by researchers when conducting a smoke cost benefit transfer. On average, wildfire smoke in the Western US creates 165 million in annual morbidity and mortality health costs.

Application of an Original Wildfire Smoke Health Cost Benefits Transfer Protocol to the Western US, 2005-2015.

PubMed

Jones, Benjamin A; Berrens, Robert P

2017-11-01

Recent growth in the frequency and severity of US wildfires has led to more wildfire smoke and increased public exposure to harmful air pollutants. Populations exposed to wildfire smoke experience a variety of negative health impacts, imposing economic costs on society. However, few estimates of smoke health costs exist and none for the entire Western US, in particular, which experiences some of the largest and most intense wildfires in the US. The lack of cost estimates is troublesome because smoke health impacts are an important consideration of the overall costs of wildfire. To address this gap, this study provides the first time series estimates of PM2.5 smoke costs across mortality and several morbidity measures for the Western US over 2005-2015. This time period includes smoke from several megafires and includes years of record-breaking acres burned. Smoke costs are estimated using a benefits transfer protocol developed for contexts when original health data are not available. The novelty of our protocol is that it synthesizes the literature on choices faced by researchers when conducting a smoke cost benefit transfer. On average, wildfire smoke in the Western US creates $165 million in annual morbidity and mortality health costs.

Cost-effectiveness of everolimus for the treatment of advanced neuroendocrine tumours of gastrointestinal or lung origin in Canada.

PubMed

Chua, A; Perrin, A; Ricci, J F; Neary, M P; Thabane, M

2018-02-01

In 2016, everolimus was approved by Health Canada for the treatment of unresectable, locally advanced or metastatic, well-differentiated, non-functional, neuroendocrine tumours (NET) of gastrointestinal (GI) or lung origin in adult patients with progressive disease. This analysis evaluated the cost-effectiveness of everolimus in this setting from a Canadian societal perspective. A partitioned survival model was developed to compare the cost per life-year (LY) gained and cost per quality-adjusted life-year (QALY) gained of everolimus plus best supportive care (BSC) versus BSC alone in patients with advanced or metastatic NET of GI or lung origin. Model health states included stable disease, disease progression, and death. Efficacy inputs were based on the RADIANT-4 trial and utilities were mapped from quality-of-life data retrieved from RADIANT-4. Resource utilization inputs were derived from a Canadian physician survey, while cost inputs were obtained from official reimbursement lists from Ontario and other published sources. Costs and efficacy outcomes were discounted 5% annually over a 10-year time horizon, and sensitivity analyses were conducted to test the robustness of the base case results. Everolimus had an incremental gain of 0.616 QALYs (0.823 LYs) and CA$89,795 resulting in an incremental cost-effectiveness ratio of CA$145,670 per QALY gained (CA$109,166 per LY gained). The probability of cost-effectiveness was 52.1% at a willingness to pay (WTP) threshold of CA$150,000 per QALY. Results of the probabilistic sensitivity analysis indicate that everolimus has a 52.1% probability of being cost-effective at a WTP threshold of CA$150,000 per QALY gained in Canada.

Advanced Polymers for Practical Use

NASA Technical Reports Server (NTRS)

1999-01-01

Resulting from a SBIR contract with the Goddard Space Flight Center, Foster-Miller developed a high performance, low cost substrate for printed circuits with a coefficient of thermal expansion (CTE) matched to the surface mounted devices. The commercial product that resulted from the agreement between the two organizations was so successful that Foster-Miller created a spin-off company named Superex, Inc., devoted solely to the promotion of this particular substrate. The contract originated from NASA's need to develop better, more cost effective satellite and land based electronic applications.

Processor Would Find Best Paths On Map

NASA Technical Reports Server (NTRS)

Eberhardt, Silvio P.

1990-01-01

Proposed very-large-scale integrated (VLSI) circuit image-data processor finds path of least cost from specified origin to any destination on map. Cost of traversal assigned to each picture element of map. Path of least cost from originating picture element to every other picture element computed as path that preserves as much as possible of signal transmitted by originating picture element. Dedicated microprocessor at each picture element stores cost of traversal and performs its share of computations of paths of least cost. Least-cost-path problem occurs in research, military maneuvers, and in planning routes of vehicles.

Projecting Serials Costs: Banking on the Past to Buy for the Future.

ERIC Educational Resources Information Center

Ketcham, Lee; Born, Kathleen

1994-01-01

Reports on a survey of international periodicals' cost history, country of origin information, and currency exchange rate to assist in identifying trends in the cost of periodicals and to project costs for the coming year. Tables present cost data by subject, continent/country or origin, and type of library. (SLW)

PDT in clinics: indications, results, and markets.

PubMed

Patrice, Thierry; Olivier, David; Bourre, Ludovic

2006-01-01

Photodynamic therapy (PDT) is based on the selective light activation of an exogenously given drug to patients. PDT acts mainly on cell membranes either of neovascular endothelial cells or of cancer cells leading to cancer cell death. Six drugs are now marketed based on clinical assays in various indications, which showed a clear cost efficiency as compared to other classical procedures. PDT is easy to handle and can be performed in medical installations fitting the conditions of health care in developing countries. Its cost effectiveness could represent an appropriate solution to the increasing number of cancers of various origin. However despite all the clinical results now available, PDT development remains slow. The reasons for this situation include cost of development, intellectual property, and competition between pharmaceutical companies.

An Unpowered Exoskeleton to Reduce Astronaut Hand Fatigue during Microgravity EVA

NASA Astrophysics Data System (ADS)

Carey, Alan John

Improving manufacturing techniques to minimize costs have always been the ultimate goal for engineers since the dawn of technology. Working toward making the end product as affordable as possible without compromising on its quality is not just a skill set to develop but also, art. This thesis deals with changing the approach to the manufacturing of the patented XQ-139 UAV by using alternative materials to reduce production costs and time. Retaining the overall structure and utility of the UAV while eliminating the high costs to produce is the primary goal. It also includes tests performed on the new UAV airframe to prove this hypothesis and compare it to the results of the original airframe. The objective is to prove that the new airframe can cope with the structural and performance demands of the original XQ-139A, while reducing the total costs to manufacture it. This thesis only deals with the processing and manufacturing of the new XQ-139A airframe. No flight tests are involved.

Network of dedicated processors for finding lowest-cost map path

NASA Technical Reports Server (NTRS)

Eberhardt, Silvio P. (Inventor)

1991-01-01

A method and associated apparatus are disclosed for finding the lowest cost path of several variable paths. The paths are comprised of a plurality of linked cost-incurring areas existing between an origin point and a destination point. The method comprises the steps of connecting a purality of nodes together in the manner of the cost-incurring areas; programming each node to have a cost associated therewith corresponding to one of the cost-incurring areas; injecting a signal into one of the nodes representing the origin point; propagating the signal through the plurality of nodes from inputs to outputs; reducing the signal in magnitude at each node as a function of the respective cost of the node; and, starting at one of the nodes representing the destination point and following a path having the least reduction in magnitude of the signal from node to node back to one of the nodes representing the origin point whereby the lowest cost path from the origin point to the destination point is found.

Analysis of electric vehicle's trip cost allowing late arrival

NASA Astrophysics Data System (ADS)

Leng, Jun-Qiang; Liu, Wei-Yi; Zhao, Lin

2017-05-01

In this paper, we use a car-following model to study each electric vehicle's trip cost and the total trip cost allowing late arrival. The numerical result show that the electricity cost has great effects on each commuter's trip cost and the total trip costs and that these effects are dependent on each commuter's time headway at the origin, but the electricity cost has no prominent impacts on the minimum value of total trip cost under each commuter's different time headway at the origin.

48 CFR 47.305-2 - Solicitations f.o.b. origin and f.o.b. destination-lowest overall cost.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Solicitations f.o.b. origin and f.o.b. destination-lowest overall cost. 47.305-2 Section 47.305-2 Federal Acquisition... Contracts 47.305-2 Solicitations f.o.b. origin and f.o.b. destination—lowest overall cost. (a) Solicitations...

The cost of drug development: a systematic review.

PubMed

Morgan, Steve; Grootendorst, Paul; Lexchin, Joel; Cunningham, Colleen; Greyson, Devon

2011-04-01

We aimed to systematically review and assess published estimates of the cost of developing new drugs. We sought English language research articles containing original estimates of the cost of drug development that were published from 1980 to 2009, inclusive. We searched seven databases and used citation tracing and expert referral to identify studies. We abstracted qualifying studies for information about methods, data sources, study samples, and key results. Thirteen articles were found to meet our inclusion criteria. Estimates of the cost of drug development ranged more than 9-fold, from USD$92 million cash (USD$161 million capitalized) to USD$883.6 million cash (USD$1.8 billion capitalized). Differences in methods, data sources, and time periods explain some of the variation in estimates. Lack of transparency limits many studies. Confidential information provided by unnamed companies about unspecified products forms all or part of the data underlying 10 of the 13 studies. Despite three decades of research in this area, no published estimate of the cost of developing a drug can be considered a gold standard. Studies on this topic should be subjected to reasonable audit and disclosure of - at the very least - the drugs which authors purport to provide development cost estimates for. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Architecture Synthesis and Reduced-Cost Architectures for Human Exploration Missions

NASA Technical Reports Server (NTRS)

Woodcock, Gordon

2004-01-01

Development of architectures for human exploration missions has been pursued in the international aerospace community for a long time. This paper attempts a different approach and way of looking at architectures. Most of the emphasis is on lunar architectures with a brief look at Mars. The first step is to set forth overarching gods in order to understand origins of requirements. Then, principles and guidelines are developed for architecture formulation. It is argued that safety and cost are the primary factors. Alternative mission profiles are examined for adherence to the principles, and specific architectures formulated according to the guidelines. The guidelines themselves indicate preferred evolution paths from lunar to Mars architectures. Results of example calculations are given to illustrate the process, and an evolution path is recommended. Safety and cost criteria tend to conflict, but it is shown that cost-efficient architectures can be enhanced for good safety ratings at modest cost.

A strategy of cost control for Mariner Venus/Mercury 1973

NASA Technical Reports Server (NTRS)

Biggs, John R.; Downhower, Walter J.

1994-01-01

The spacecraft launched by NASA on November 3, 1973 to explore Venus and Mercury proved a notable success as a development project both in space and on the ground. This article on the development points our management approaches and techniques that kept schedules and controlled costs, the intent being to stimulate thought about how to do the same with future spacecraft and payloads. The Mariner Venus/Mercury '73 (MVM '73) project kept within its originally established goals for schedule, performance, and cost. Underlying this development success was the availability of the Mariner technology. But meeting the goals demanded management determination, planning, and discipline to make optimum use of state-of-the-art technology--on the part of people at NASA, JPL, and The Boeing Co. (the contractor).

Business and Management Development Training Program for Hispanic Women. Final Report.

ERIC Educational Resources Information Center

Miranda (L.) and Associates, Bethesda, MD.

A program was conducted to develop and motivate minority women, in particular Hispanic origin women, in the Washington, D.C., metropolitan area to participate in business ownership and management. Offered at no cost to participants, the training program sought to equip potential managers with information and techniques in the fundamental…

Issues with Access to Acquisition Data and Information in the Department of Defense: A Closer Look at the Origins and Implementation of Controlled Unclassified Information Labels and Security Policy

DTIC Science & Technology

2016-12-01

at a high cost and is protected by contractual agreements between vendors and the government. Yet indiscriminate labeling of information as...federally funded research and development centers [FFRDCs], information technology [IT] support, or other contractor support). Proprietary...con- tractor originators of the information (prime contractors and subcontractors), the government, and nongovernmental entities assisting the

Issues with Access to Acquisition Data and Information in the Department of Defense: A Closer Look at the Origins and Implementation of Controlled Unclassified Information Labels and Security Policy

DTIC Science & Technology

2016-12-19

at a high cost and is protected by contractual agreements between vendors and the government. Yet indiscriminate labeling of information as...federally funded research and development centers [FFRDCs], information technology [IT] support, or other contractor support). Proprietary...con- tractor originators of the information (prime contractors and subcontractors), the government, and nongovernmental entities assisting the

A Spatial-Economic Cost-Reduction Pathway Analysis for U.S. Offshore Wind Energy Development from 2015-2030

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beiter, Philipp; Stehly, Tyler

The potential for cost reduction and economic viability for offshore wind varies considerably within the United States. This analysis models the cost impact of a range of offshore wind locational cost variables across more than 7,000 potential coastal sites in the United States' offshore wind resource area. It also assesses the impact of over 50 technology innovations on potential future costs between 2015 and 2027 (Commercial Operation Date) for both fixed-bottom and floating wind systems. Comparing these costs to an initial assessment of local avoided generating costs, this analysis provides a framework for estimating the economic potential for offshore wind.more » Analyzing economic potential within this framework can help establish a refined understanding across industries of the technology and site-specific risks and opportunities associated with future offshore wind development. The findings from the original report indicate that under the modeled scenario, offshore wind can be expected to achieve significant cost reductions and may approach economic viability in some parts of the United States within the next 15 years.« less

Questionnaire Adapting: Little Changes Mean a Lot.

PubMed

Sousa, Vanessa E C; Matson, Jeffrey; Dunn Lopez, Karen

2017-09-01

Questionnaire development involves rigorous testing to ensure reliability and validity. Due to time and cost constraints of developing new questionnaires, researchers often adapt existing questionnaires to better fit the purpose of their study. However, the effect of such adaptations is unclear. We conducted cognitive interviews as a method to evaluate the understanding of original and adapted questionnaire items to be applied in a future study. The findings revealed that all subjects (a) comprehended the original and adapted items differently, (b) changed their scores after comparing the original to the adapted items, and (c) were unanimous in stating that the adapted items were easier to understand. Cognitive interviewing allowed us to assess the interpretation of adapted items in a useful and efficient manner before use in data collection.

Development of Advanced Life Cycle Costing Methods for Technology Benefit/Cost/Risk Assessment

NASA Technical Reports Server (NTRS)

Yackovetsky, Robert (Technical Monitor)

2002-01-01

The overall objective of this three-year grant is to provide NASA Langley's System Analysis Branch with improved affordability tools and methods based on probabilistic cost assessment techniques. In order to accomplish this objective, the Aerospace Systems Design Laboratory (ASDL) needs to pursue more detailed affordability, technology impact, and risk prediction methods and to demonstrate them on variety of advanced commercial transports. The affordability assessment, which is a cornerstone of ASDL methods, relies on the Aircraft Life Cycle Cost Analysis (ALCCA) program originally developed by NASA Ames Research Center and enhanced by ASDL. This grant proposed to improve ALCCA in support of the project objective by updating the research, design, test, and evaluation cost module, as well as the engine development cost module. Investigations into enhancements to ALCCA include improved engine development cost, process based costing, supportability cost, and system reliability with airline loss of revenue for system downtime. A probabilistic, stand-alone version of ALCCA/FLOPS will also be developed under this grant in order to capture the uncertainty involved in technology assessments. FLOPS (FLight Optimization System program) is an aircraft synthesis and sizing code developed by NASA Langley Research Center. This probabilistic version of the coupled program will be used within a Technology Impact Forecasting (TIF) method to determine what types of technologies would have to be infused in a system in order to meet customer requirements. A probabilistic analysis of the CER's (cost estimating relationships) within ALCCA will also be carried out under this contract in order to gain some insight as to the most influential costs and the impact that code fidelity could have on future RDS (Robust Design Simulation) studies.

47 CFR 32.2211 - Non-digital switching.

Code of Federal Regulations, 2010 CFR

2010-10-01

... switching. (a) This account shall include: (1) Original cost of stored program control analog circuit-switching and associated equipment. (2) Cost of remote analog electronic circuit switches. (3) Original cost of non-electronic circuit-switching equipment such as Step-by-Step, Crossbar, and Other Electro...

47 CFR 32.2211 - Non-digital switching.

Code of Federal Regulations, 2013 CFR

2013-10-01

... switching. (a) This account shall include: (1) Original cost of stored program control analog circuit-switching and associated equipment. (2) Cost of remote analog electronic circuit switches. (3) Original cost of non-electronic circuit-switching equipment such as Step-by-Step, Crossbar, and Other Electro...

47 CFR 32.2211 - Non-digital switching.

Code of Federal Regulations, 2012 CFR

2012-10-01

... switching. (a) This account shall include: (1) Original cost of stored program control analog circuit-switching and associated equipment. (2) Cost of remote analog electronic circuit switches. (3) Original cost of non-electronic circuit-switching equipment such as Step-by-Step, Crossbar, and Other Electro...

47 CFR 32.2211 - Non-digital switching.

Code of Federal Regulations, 2011 CFR

2011-10-01

... switching. (a) This account shall include: (1) Original cost of stored program control analog circuit-switching and associated equipment. (2) Cost of remote analog electronic circuit switches. (3) Original cost of non-electronic circuit-switching equipment such as Step-by-Step, Crossbar, and Other Electro...

47 CFR 32.2211 - Non-digital switching.

Code of Federal Regulations, 2014 CFR

2014-10-01

... switching. (a) This account shall include: (1) Original cost of stored program control analog circuit-switching and associated equipment. (2) Cost of remote analog electronic circuit switches. (3) Original cost of non-electronic circuit-switching equipment such as Step-by-Step, Crossbar, and Other Electro...

Applying energy-conservation retrofits to standard Army buildings: Data analysis and recommendations. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westervelt, E.T.; Northup, G.R.; Lawrie, L.K.

1990-09-01

This report describes the data analysis and recommendations of a project demonstrating the energy performance of theoretically based retrofit packages on existing standard Army building at Fort Carson, CO. Four standard designs were investigated: a motor vehicle repair shop, the Type 64 (L-shaped) barracks, an enlisted personnel mess hall, and a two-company, rolling-pin-shaped barracks for enlisted personnel. The tested conservation measures included envelope and system modifications. Energy data were gathered and analyzed from 14 buildings. Based on measured savings and current costs of fuel and construction, none of the four original packages are life-cycle cost-effective at present, but two maymore » become effective in the near future. Of higher priority for energy and cost savings is the improvement of building operations, in particular heat production and distribution systems, which lack efficiency and control. Followup work at the L-shaped barracks yielded substantial savings, with a saving-to-investment ration of 5 to 1. Cost scenarios, energy models, and building were developed for the original retrofits to assess applicability elsewhere and in the future.« less

``Low-cost Electronic nose evaluated on Thai-herb of Northern-Thailand samples using multivariate analysis methods''

NASA Astrophysics Data System (ADS)

na ayudhaya, Paisarn Daungjak; Klinbumrung, Arrak; Jaroensutasinee, Krisanadej; Pratontep, Sirapat; Kerdcharoen, Teerakiat

2009-05-01

In case of species of natural and aromatic plant originated from the northern Thailand, sensory characteristics, especially odours, have unique identifiers of herbs. The instruments sensory analysis have performed by several of differential of sensing, so call `electronic nose', to be a significantly and rapidly for chemometrics. The signal responses of the low cost electronic nose were evaluated by principal component analysis (PCA). The aims of this paper evaluated various of Thai-herbs grown in Northern of Thailand as data preprocessing tools of the Low-cost electronic nose (enNU-PYO1). The essential oil groups of Thai herbs such as Garlic, Lemongrass, Shallot (potato onion), Onion, Zanthoxylum limonella (Dennst.) Alston (Thai name is Makaen), and Kaffir lime leaf were compared volatilized from selected fresh herbs. Principal component analysis of the original sensor responses did clearly distinguish either all samples. In all cases more than 97% for cross-validated group were classified correctly. The results demonstrated that it was possible to develop in a model to construct a low-cost electronic nose to provide measurement of odoriferous herbs.

Solar Concentration for Electricity and Cooking

NASA Astrophysics Data System (ADS)

Kim, Mike; Fourt, Connor; Schwartz, Pete; Lee, Michael; Frostholm, Taylor; Fernandes, Josh; Tower, Jared

2012-11-01

Over 8000 Schefflers exist worldwide, mostly in Africa and Asia. Having constructed the first Scheffler reflector in North America 2 years ago, the next goal was to make it less expensive. The original model took 4 students 2 months and about 1000. In order to lower the cost and construction time the design was minimized, less expensive materials were used, and the construction process was automated. The original complex frame took 1000 people-hours and it was minimized to a day. Instead of using aluminum for the reflective dish, we turned to using aluminized Mylar, which cut the cost by over 90%. A thermal storage unit was added to extend cooking time well into the evening. Finally, a concentrated solar module of High Efficiency Photo Voltaics (HEPV) is to be placed at the focus of the concentrator to generate electricity and water as a byproduct. The final cost is estimated to be about 200 (0.10 per thermal watt) including the HEPV, an 80% cost reduction. Such technology is practical in the U.S. as well as developing nations.

Development of cost-effective Hordeum chilense DNA markers: molecular aids for marker-assisted cereal breeding.

PubMed

Hernández, P; Dorado, G; Ramírez, M C; Laurie, D A; Snape, J W; Martín, A

2003-01-01

Hordeum chilense is a potential source of useful genes for wheat breeding. The use of this wild species to increase genetic variation in wheat will be greatly facilitated by marker-assisted introgression. In recent years, the search for the most suitable DNA marker system for tagging H. chilense genomic regions in a wheat background has lead to the development of RAPD and SCAR markers for this species. RAPDs represent an easy way of quickly generating suitable introgression markers, but their use is limited in heterogeneous wheat genetic backgrounds. SCARs are more specific assays, suitable for automatation or multiplexing. Direct sequencing of RAPD products is a cost-effective approach that reduces labour and costs for SCAR development. The use of SSR and STS primers originally developed for wheat and barley are additional sources of genetic markers. Practical applications of the different marker approaches for obtaining derived introgression products are described.

Evaluating the cost of therapy for restenosis: considerations for brachytherapy.

PubMed

Weintraub, W S

1996-11-01

Costs have become increasingly important in medicine in recent years as demand for services has outstripped readily available resources. Clinical microeconomics offers an approach to understanding cost and outcomes in an environment of economic scarcity. In this article the types of costs and methods for determining cost are presented. In addition, methods for assessing outcome and outcome in relation to cost are developed. Restenosis after coronary angioplasty is a prime example of a clinical problem requiring economic evaluation. This is because it results in little serious morbidity except for recurrent chest pain, but it has serious economic consequences which occur some time after the original angioplasty. This makes the economic assessment of restenosis complicated. The application of health care microeconomic principles to brachytherapy for restenosis in the coronary arteries is presented.

Wood transportation systems-a spin-off of a computerized information and mapping technique

Treesearch

William W. Phillips; Thomas J. Corcoran

1978-01-01

A computerized mapping system originally developed for planning the control of the spruce budworm in Maine has been extended into a tool for planning road net-work development and optimizing transportation costs. A budgetary process and a mathematical linear programming routine are used interactively with the mapping and information retrieval capabilities of the system...

H2A Biomethane Model Documentation and a Case Study for Biogas From Dairy Farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saur, G.; Jalalzadeh, A.

2010-12-01

The new H2A Biomethane model was developed to estimate the levelized cost of biomethane by using the framework of the vetted original H2A models for hydrogen production and delivery. For biomethane production, biogas from sources such as dairy farms and landfills is upgraded by a cleanup process. The model also estimates the cost to compress and transport the product gas via the pipeline to export it to the natural gas grid or any other potential end-use site. Inputs include feed biogas composition and cost, required biomethane quality, cleanup equipment capital and operations and maintenance costs, process electricity usage and costs,more » and pipeline delivery specifications.« less

Ensuring the Enduring Viability of the Space Science Enterprise: New Questions, New Thinking, New Paradigms

NASA Astrophysics Data System (ADS)

Arenberg, Jonathan; Conti, Alberto; Atkinson, Charles

2017-01-01

Pursuing ground breaking science in a highly cost and funding constrained environment presents new challenges to the development of future space astrophysics missions. Within the conventional cost models for large observatories, executing a flagship “mission after next” appears to be unstainable. To achieve our nation’s space astrophysics ambitions requires new paradigms in system design, development and manufacture. Implementation of this new paradigm requires that the space astrophysics community adopt new answers to a new set of questions. This paper will discuss the origins of these new questions and the steps to their answers.

76 FR 64931 - Building Energy Codes Cost Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... Cost Analysis published in the Federal Register on September 13, 2011. 76 FR 56413. The original...-0121. Telephone: (202) 586-2945. Please submit one signed original paper copy. Hand Delivery/Courier...., 6th Floor, Washington, DC 20024. Please submit one signed original paper copy. Docket: For access to...

Cost estimates for selected California smart traveler operation tests. Volume 1, technical report

DOT National Transportation Integrated Search

1993-03-01

The original "California Smart Traveler" report describes how telephone-based information systems can be used to develop new types of public transportation services (e.g. single-trip carpools) and to integrate these new services with conventional tra...

75 FR 25829 - Notice of Acceptance of Proposals for the Section 538 Multi-Family Housing Guaranteed Rural...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-10

..., Senior, or Mixed) 6. Project's Total Units 7. Project's Total Development Cost (TDC) 8. Amount of 538...) prohibits discrimination in all its programs and activities on the basis of race, color, national origin...

Health care use and costs of adverse drug events emerging from outpatient treatment in Germany: a modelling approach.

PubMed

Stark, Renee G; John, Jürgen; Leidl, Reiner

2011-01-13

This study's aim was to develop a first quantification of the frequency and costs of adverse drug events (ADEs) originating in ambulatory medical practice in Germany. The frequencies and costs of ADEs were quantified for a base case, building on an existing cost-of-illness model for ADEs. The model originates from the U.S. health care system, its structure of treatment probabilities linked to ADEs was transferred to Germany. Sensitivity analyses based on values determined from a literature review were used to test the postulated results. For Germany, the base case postulated that about 2 million adults ingesting medications have will have an ADE in 2007. Health care costs related to ADEs in this base case totalled 816 million Euros, mean costs per case were 381 Euros. About 58% of costs resulted from hospitalisations, 11% from emergency department visits and 21% from long-term care. Base case estimates of frequency and costs of ADEs were lower than all estimates of the sensitivity analyses. The postulated frequency and costs of ADEs illustrate the possible size of the health problems and economic burden related to ADEs in Germany. The validity of the U.S. treatment structure used remains to be determined for Germany. The sensitivity analysis used assumptions from different studies and thus further quantified the information gap in Germany regarding ADEs. This study found costs of ADEs in the ambulatory setting in Germany to be significant. Due to data scarcity, results are only a rough indication.

Comparing Life-Cycle Costs of ESPCs and Appropriations-Funded Energy Projects: An Update to the 2002 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shonder, John A; Hughes, Patrick; Atkin, Erica

2006-11-01

A study was sponsored by FEMP in 2001 - 2002 to develop methods to compare life-cycle costs of federal energy conservation projects carried out through energy savings performance contracts (ESPCs) and projects that are directly funded by appropriations. The study described in this report follows up on the original work, taking advantage of new pricing data on equipment and on $500 million worth of Super ESPC projects awarded since the end of FY 2001. The methods developed to compare life-cycle costs of ESPCs and directly funded energy projects are based on the following tasks: (1) Verify the parity of equipmentmore » prices in ESPC vs. directly funded projects; (2) Develop a representative energy conservation project; (3) Determine representative cycle times for both ESPCs and appropriations-funded projects; (4) Model the representative energy project implemented through an ESPC and through appropriations funding; and (5) Calculate the life-cycle costs for each project.« less

Energy and life-cycle cost analysis of a six-story office building

NASA Astrophysics Data System (ADS)

Turiel, I.

1981-10-01

An energy analysis computer program, DOE-2, was used to compute annual energy use for a typical office building as originally designed and with several energy conserving design modifications. The largest energy use reductions were obtained with the incorporation of daylighting techniques, the use of double pane windows, night temperature setback, and the reduction of artificial lighting levels. A life-cycle cost model was developed to assess the cost-effectiveness of the design modifications discussed. The model incorporates such features as inclusion of taxes, depreciation, and financing of conservation investments. The energy conserving strategies are ranked according to economic criteria such as net present benefit, discounted payback period, and benefit to cost ratio.

KSC-2011-8115

NASA Image and Video Library

2011-12-01

CAPE CANAVERAL, Fla. -- This is an artist's conception of the Space Vehicle under development by Blue Origin of Kent, Wash., for NASA's Commercial Crew Program (CCP). In 2011, NASA selected Blue Origin during Commercial Crew Development Round 2 (CCDev2) activities to mature the design and development of a crew transportation system with the overall goal of accelerating a United States-led capability to the International Space Station. The goal of CCP is to drive down the cost of space travel as well as open up space to more people than ever before by balancing industry’s own innovative capabilities with NASA's 50 years of human spaceflight experience. Six other aerospace companies also are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. (ATK), The Boeing Co., Excalibur Almaz Inc., Sierra Nevada Corp., Space Exploration Technologies (SpaceX), and United Launch Alliance (ULA). For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

Sexual Dimorphism and Sexual Selection: A Unified Economic Analysis1

PubMed Central

Chu, C. Y. Cyrus; Lee, Ronald D.

2012-01-01

We develop a life history model with two sexes, and study the optimal energy allocation strategy of males and females. We join Darwin and others in suggesting that the origin of sexual dimorphism and sexual selection is the difference between male and female reproduction costs. Due to this assumed cost difference, the resulting Bellman equations of gene dynamics in our two-sex life history model imply a large “energy surplus” on the part of males. This allows the male form to devote energy to the development of some costly male traits that help the males to compete for access to females. These costly male traits are sexually dimorphic. Using this life history model, we are able to explain important features of sexual dimorphism, as well as why males often transfer less to their offspring than do females, and why only females have menopause. PMID:22699007

Two-tier tube-trailer pressure consolidation operation method for hydrogen refueling station cost reduction

DOE PAGES

Reddi, Krishna; Elgowainy, Amgad; Rustagi, Neha; ...

2018-01-10

An operation strategy known as two-tier “pressure consolidation” of delivered tube-trailers (or equivalent supply storage) has been developed to maximize the throughput at gaseous hydrogen refueling stations (HRSs) for fuel cell electric vehicles (FCEVs). The high capital costs of HRSs and the consequent high investment risk are deterring growth of the infrastructure needed to promote the deployment of FCEVs. Stations supplied by gaseous hydrogen will be necessary for FCEV deployment in both the near and long term. Here, the two-tier pressure consolidation method enhances gaseous HRSs in the following ways: (1) reduces the capital cost compared with conventional stations, asmore » well as those operating according to the original pressure consolidation approach described by Elgowainy et al. (2014) [1], (2) minimizes pressure cycling of HRS supply storage relative to the original pressure consolidation approach; and (3) increases use of the station’s supply storage (or delivered tube-trailers) while maintaining higher state-of-charge vehicle fills.« less

Two-tier tube-trailer pressure consolidation operation method for hydrogen refueling station cost reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reddi, Krishna; Elgowainy, Amgad; Rustagi, Neha

An operation strategy known as two-tier “pressure consolidation” of delivered tube-trailers (or equivalent supply storage) has been developed to maximize the throughput at gaseous hydrogen refueling stations (HRSs) for fuel cell electric vehicles (FCEVs). The high capital costs of HRSs and the consequent high investment risk are deterring growth of the infrastructure needed to promote the deployment of FCEVs. Stations supplied by gaseous hydrogen will be necessary for FCEV deployment in both the near and long term. Here, the two-tier pressure consolidation method enhances gaseous HRSs in the following ways: (1) reduces the capital cost compared with conventional stations, asmore » well as those operating according to the original pressure consolidation approach described by Elgowainy et al. (2014) [1], (2) minimizes pressure cycling of HRS supply storage relative to the original pressure consolidation approach; and (3) increases use of the station’s supply storage (or delivered tube-trailers) while maintaining higher state-of-charge vehicle fills.« less

Assessing and interpreting the benefits derived from implementing and using asset management systems.

DOT National Transportation Integrated Search

2011-06-23

Interest in asset management has grown over the last two decades but agencies continue to be : concerned about the cost to develop and implement asset management processes. While originally : introduced as a tool for policy analysis, HERS-ST is free ...

Measures of Residual Risk with Connections to Regression, Risk Tracking, Surrogate Models, and Ambiguity

DTIC Science & Technology

2015-05-20

original variable. Residual risk can be exempli ed as a quanti cation of the improved situation faced by a hedging investor compared to that of a...distributional information about Yx for every x as well as the computational cost of evaluating R(Yx) for numerous x, for example within an optimization...Still, when g is costly to evaluate , it might be desirable to develop an approximation of R(Yx), x ∈ IRn through regression based on observations {xj

A Community Format for Electro-Optic Space Situational Awareness (EOSSA) Data Products

DTIC Science & Technology

2014-09-01

developed and tested for RSO characterization with reduced cost . The file specification document for EOSSA provides a foundation to enable data providers... geocentric velocity aberration). SGP4 and VCMs produce geocentric origin and velocity aberration and subtracting the sensor geocentric position of the

New Paradigms for Ensuring the Enduring Viability of the Space Science Enterprise

NASA Astrophysics Data System (ADS)

Arenberg, Jonathan; Conti, Alberto

2018-01-01

Pursuing ground breaking science in a highly cost and funding constrained environment presents new challenges to the development of future large space astrophysics missions. Within the conventional cost models for large observatories, executing a flagship “mission after next” appears to be unstainable. To achieve our nation’s space astrophysics ambitions requires new paradigms in system design, development and manufacture. Implementation of this new paradigm requires that the space astrophysics community adopt new answers to a new set of questions. This poster will present our recent results on the origins of these new questions and the steps to their answers.

Patents Associated with High-Cost Drugs in Australia

PubMed Central

Christie, Andrew F.; Dent, Chris; McIntyre, Peter; Wilson, Lachlan; Studdert, David M.

2013-01-01

Australia, like most countries, faces high and rapidly-rising drug costs. There are longstanding concerns about pharmaceutical companies inappropriately extending their monopoly position by “evergreening” blockbuster drugs, through misuse of the patent system. There is, however, very little empirical information about this behaviour. We fill the gap by analysing all of the patents associated with 15 of the costliest drugs in Australia over the last 20 years. Specifically, we search the patent register to identify all the granted patents that cover the active pharmaceutical ingredient of the high-cost drugs. Then, we classify the patents by type, and identify their owners. We find a mean of 49 patents associated with each drug. Three-quarters of these patents are owned by companies other than the drug's originator. Surprisingly, the majority of all patents are owned by companies that do not have a record of developing top-selling drugs. Our findings show that a multitude of players seek monopoly control over innovations to blockbuster drugs. Consequently, attempts to control drug costs by mitigating misuse of the patent system are likely to miss the mark if they focus only on the patenting activities of originators. PMID:23577165

The effectiveness of low-cost teleconsultation for emergency head computer tomography in patients with suspected stroke.

PubMed

Phabphal, Kanitpong; Hirunpatch, Siriporn

2008-01-01

Teleradiology in an emergency situation can be used to support rapid neurological decision-making when specialists are remote from the hospital concerned. We have developed a low-cost system using a PDA phone as the receiving equipment. The experimental system was based on a notebook PC to send the images and a PDA phone to receive them. We used commercially available toolbar software for transmitting the information through the mobile phone network. A total of 100 images from clinically suspected strokes within the previous 24 hours were transmitted to a neurologist. The mean size of the original picture was 20.9 kByte and the images were compressed by approximately 2:1 before transmission. The mean transmission time was 48 s per image. The diagnosis from the PDA phone image was in complete agreement with the diagnosis from the original image in cases of acute ischaemic stroke, intracerebral haemorrhage, metastasis and in normal scans. However, there was agreement in only 7 of the 8 cases (88%) of subarachnoid haemorrhage. The overall transmission cost was 400 Thai baht per case. The study showed that good accuracy can be achieved with a low-cost system for teleradiology consultation in stroke.

JPRS Report, Science & Technology, China: Energy

DTIC Science & Technology

1989-04-05

million tons. In 1985, nine Huaneng power companies were also set up, to trans- form oil-burning machinery to conserve fuel oil and to develop ...resettlement into a single socioeconomic system and bring the dislocated people into that system’s social, economic and cultural develop - ment program ...state’s original program , the overall cost for development of the three large strip mines in eastern Inner Mongolia was to be 195 million yuan

Training as a Social Purpose: Are Economic and Social Benefits Delivered?

ERIC Educational Resources Information Center

Butler, Allan; Lobley, Matt

2016-01-01

This paper reports original research which measures the social and economic impact of training and skills development on individuals who participated in training provided by social purpose, nonprofit organizations. An implicit policy assumption is that such organizations contribute to social and economic regeneration. Examining the costs and…

REFERENCE VALUES FOR FISH EXPOSURE TO PAH CONTAMINANTS: COMPARISON OF OHIO AND THE MID-ATLANTIC REGION

EPA Science Inventory

Reference values for exposure of wildlife to contaminants are needed to cost effectively determine if a site is contaminated and to rank sites that are above background levels. Epidemiological techniques originally developed for clinical chemistry and for determining exposures t...

Early Adversity, Elevated Stress Physiology, Accelerated Sexual Maturation, and Poor Health in Females

ERIC Educational Resources Information Center

Belsky, Jay; Ruttle, Paula L.; Boyce, W. Thomas; Armstrong, Jeffrey M.; Essex, Marilyn J.

2015-01-01

Evolutionary-minded developmentalists studying predictive-adaptive-response processes linking childhood adversity with accelerated female reproductive development and health scientists investigating the developmental origins of health and disease (DOoHaD) may be tapping the same process, whereby longer-term health costs are traded off for…

Technical Assessment: Autonomy

DTIC Science & Technology

2015-02-23

low-cost sensors for automotive applications, mobile devices, and video games . If DoD develops CONOPS for lower- performance systems, there is an...advancement in this area is Microsoft’s Kinect technology. While originally designed for the Xbox video game platform, it is now being used or developed for...One area worthy of consideration is applied game theory, which may allow systems to effectively respond to adversary actions. Recommendation 4

50 CFR 84.49 - What if the project costs more or less than originally expected?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false What if the project costs more or less... § 84.49 What if the project costs more or less than originally expected? All requests for additional... grants. Any monies left over after the project is complete, or if the project is not completed, should be...

50 CFR 84.49 - What if the project costs more or less than originally expected?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false What if the project costs more or less... § 84.49 What if the project costs more or less than originally expected? All requests for additional... grants. Any monies left over after the project is complete, or if the project is not completed, should be...

50 CFR 84.49 - What if the project costs more or less than originally expected?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false What if the project costs more or less... § 84.49 What if the project costs more or less than originally expected? All requests for additional... grants. Any monies left over after the project is complete, or if the project is not completed, should be...

An Illustrated Overview of the Origins and Development of the QSCP Meetings

NASA Astrophysics Data System (ADS)

Maruani, Jean

The origins and development of the QSCP meetings are recalled: from a congress organized in Paris in 1986 to honour Prof. Raymond Daudel, through Franco-Bulgarian cooperation between various teams then European contracts, in the frame of COST projects, involving a network of French, Spanish, British, Italian, Swedish, and Bulgarian scientists, till the holding of the first QSCP workshop near Pisa in 1996 to honour Prof. Stefan Christov. After that there was a meeting every year, always with proceedings published. This historical overview will be presented as an illustrated journey in picturesque cities of Western and Eastern Europe, North Africa, and North America, sprinkled with historical or philosophical anecdotes and insights.

The development of the new Eureka process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watari, R.; Shoji, Y.; Ishikawa, T.

1987-01-01

Fuji Oil and Chiyoda have jointly developed this new Eureka (ET-II) process. It utilizes the unique technology of the original Eureka process, such as the injection of superheated steam into the reaction atmosphere and the handling of pitch in a molten state. It also combines a cracking heater with a high conversion rate and a single flow type reactor. In comparison with the original Eureka process, the advantages offered by the ET-II process are: Lower capital investment; lower operating cost; higher yield of lighter distillates. The cracked oil products can also be processed in secondary upgrading processes and the pitchmore » can then be utilized as a form of pitch water slurry fuel.« less

Unit Costs of Interlibrary Loans and Photocopies at a Regional Medical Library: Preliminary Report *

PubMed Central

Spencer, Carol C.

1970-01-01

Unit costs of providing interlibrary loans and photocopies were determined by a method not previously used for library cost studies: random time sampling with self-observation. The working time of all appropriate personnel was sampled using Random Alarm Mechanisms and a structured checklist of tasks. The total lender's unit cost per request received, including direct labor, materials, fringe benefits, and overhead, was $1.526 for originals mailed postpaid by lender, and $1.534 for photocopies mailed. Corresponding unit costs per request filled were: originals, $1.932, and photocopies, $1.763. PMID:5439910

Economical photovoltaic power generation with heat recovery

NASA Technical Reports Server (NTRS)

Ascher, G.

1977-01-01

Three designs for conversion of solar radiation to electricity and thermal energy are analyzed. The objective of these converters is to increase the electric and thermal output for each photovoltaic array so as to lower the cell cost relative to the amount of energy delivered. An analysis of the economical aspects of conversion by photovoltaic cells with heat recovery is carried out in terms of hypothetical examples. Thus, it is shown that the original cost of say $40,000 per generated kilowat can be reduced to $572.00 per kilowatt by increasing the original electric output of 1 kW to 10 kW in electricity and 60 kW in thermal energy. The newly derived specific cost is only 1.4 percent of the original one. It is expected that a cost reduction of roughly 2% of the present specific cost per kilowatt will greatly stimulate public acceptance of photovoltaic terrestrial conversion to electricity.

World Wind Tools Reveal Environmental Change

NASA Technical Reports Server (NTRS)

2012-01-01

Originally developed under NASA's Learning Technologies program as a tool to engage and inspire students, World Wind software was released under the NASA Open Source Agreement license. Honolulu, Hawaii based Intelesense Technologies is one of the companies currently making use of the technology for environmental, public health, and other monitoring applications for nonprofit organizations and Government agencies. The company saved about $1 million in development costs by using the NASA software.

Livestock transport from the perspective of the pre-slaughter logistic chain: a review.

PubMed

Miranda-de la Lama, G C; Villarroel, M; María, G A

2014-09-01

New developments in livestock transport within the pre-slaughter chain are discussed in terms of three logistic nodes: origin, stopovers and slaughterhouse. Factors as transport cost, haulier, truck specifications, micro-environment conditions, loading density, route planning, vehicle accidents and journey length are discussed as well as causes of morbidity, mortality, live weight and carcass damage. Taking into account current trends towards increased transport times, logistics stopovers and mixed transport, there is a need to develop systems of evaluation and decision-making that provide tools and protocols that can minimize the biological cost to animals, which may have been underestimated in the past. Copyright © 2014 Elsevier Ltd. All rights reserved.

[A future image of clinical inspection from health economics].

PubMed

Kakihara, Hiroaki

2006-06-01

Do you let medical costs increase in proportion to the growth rate of GDP? A way of thinking of the Council on Economic and Fiscal Policy. Should we exclude public medical insurance? It is not a problem, it is an absolute sum if you are effective. If there is no insurance, and individuals pay the total amount, there is no problem, but it is impossible. Economic development will cease if there is no insurance. As medical personnel, to offer good medical care with an appropriate cost. An appeal to the nation is necessary. Economic technical evaluation to identify a cheap method for each clinical inspection. Does medical insurance have a deficit? I. Japanese Health insurance system. (1) Health insurance union. When you look at the contribution money, it is originally 2,479,800,000,000 yen, with premium income and a profit of 45%. (2) Government management health insurance. When you look at the contribution money, it is originally 2,163,300,000,000 yen, with premium income and a profit of 36%. (1) + (2) Employed insurance meter. (3) Mutual aid. (4) National Health Insurance. II. A clinical economic method. III. Expense of medical care and its effect. A. Expense. B. A medical economic technical evaluation method. 1. Cost-effectiveness analysis CEA. 2. Cost utility analysis CUA. 3. Cost-benefit analysis CBA. 4. Expense minimization analysis.

Tree value conversion standards revisited

Treesearch

Paul S. DeBald; Martin E. Dale; Martin E. Dale

1991-01-01

Updated tree value conversion standards (TVCS) are presented for 12 important hardwood species of the oak-hickory forest. These updated standards-developed for each species by butt-log grade, merchantable height, and diameter at breast height-reflect the changes in lumber prices and in conversion costs which have occurred since 1976 when the original TVCS were...

Teacher Observation of Classroom Adaptation--Checklist: Development and Factor Structure

ERIC Educational Resources Information Center

Koth, Christine W.; Bradshaw, Catherine P.; Leaf, Philip J.

2009-01-01

Two studies examined the validity and factor structure of the Teacher Observation of Classroom Adaptation-Checklist, an instrument used to evaluate school-based programs. The checklist is a cost-effective alternative to the original interview format, and the factor structure is consistent across gender, race, age, and time of administration.…

Costly third-party punishment in young children.

PubMed

McAuliffe, Katherine; Jordan, Jillian J; Warneken, Felix

2015-01-01

Human adults engage in costly third-party punishment of unfair behavior, but the developmental origins of this behavior are unknown. Here we investigate costly third-party punishment in 5- and 6-year-old children. Participants were asked to accept (enact) or reject (punish) proposed allocations of resources between a pair of absent, anonymous children. In addition, we manipulated whether subjects had to pay a cost to punish proposed allocations. Experiment 1 showed that 6-year-olds (but not 5-year-olds) punished unfair proposals more than fair proposals. However, children punished less when doing so was personally costly. Thus, while sensitive to cost, they were willing to sacrifice resources to intervene against unfairness. Experiment 2 showed that 6-year-olds were less sensitive to unequal allocations when they resulted from selfishness than generosity. These findings show that costly third-party punishment of unfair behavior is present in young children, suggesting that from early in development children show a sophisticated capacity to promote fair behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

Effects of oil field development on low volume roadways: an overlooked energy related cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mason, J.M.

Roadway networks throughout the nation carry numerous types of commercial vehicle traffic. Each commodity shares in the cost of providing an acceptable roadway pavement. The design, or intended-use, of a particular facility will serve its original intent for some period of time. The system can fail due to numerous environmental changes, but it is in serious jeopardy when subjected to a traffic condition well beyond its intended purpose. Unfortunately, the burden of the associated costs has fallen on state agencies already obligated with a host of maintenance responsibilities. Any attempts at predicting and anticipating needed financial resources and expenditures canmore » aid in the planning and distribution of allocated funds. The analysis procedure developed in this research can also be used to assist in anticipating roadway damage under similar conditions. While a reduction in pavement life is inevitable on any road, the effects of increased cost should not be ignored in times of financial austerity. If rational analysis is coupled with convincing evidence, the engineer will be able to justify additional allocations to maintain the existing system. Perhaps, if these costs are considered ''energy related costs''-they will receive the attention they warrant.« less

On Convergence of Development Costs and Cost Models for Complex Spaceflight Instrument Electronics

NASA Technical Reports Server (NTRS)

Kizhner, Semion; Patel, Umeshkumar D.; Kasa, Robert L.; Hestnes, Phyllis; Brown, Tammy; Vootukuru, Madhavi

2008-01-01

Development costs of a few recent spaceflight instrument electrical and electronics subsystems have diverged from respective heritage cost model predictions. The cost models used are Grass Roots, Price-H and Parametric Model. These cost models originated in the military and industry around 1970 and were successfully adopted and patched by NASA on a mission-by-mission basis for years. However, the complexity of new instruments recently changed rapidly by orders of magnitude. This is most obvious in the complexity of representative spaceflight instrument electronics' data system. It is now required to perform intermediate processing of digitized data apart from conventional processing of science phenomenon signals from multiple detectors. This involves on-board instrument formatting of computational operands from row data for example, images), multi-million operations per second on large volumes of data in reconfigurable hardware (in addition to processing on a general purpose imbedded or standalone instrument flight computer), as well as making decisions for on-board system adaptation and resource reconfiguration. The instrument data system is now tasked to perform more functions, such as forming packets and instrument-level data compression of more than one data stream, which are traditionally performed by the spacecraft command and data handling system. It is furthermore required that the electronics box for new complex instruments is developed for one-digit watt power consumption, small size and that it is light-weight, and delivers super-computing capabilities. The conflict between the actual development cost of newer complex instruments and its electronics components' heritage cost model predictions seems to be irreconcilable. This conflict and an approach to its resolution are addressed in this paper by determining the complexity parameters, complexity index, and their use in enhanced cost model.

A comparative review of nurse turnover rates and costs across countries.

PubMed

Duffield, Christine M; Roche, Michael A; Homer, Caroline; Buchan, James; Dimitrelis, Sofia

2014-12-01

To compare nurse turnover rates and costs from four studies in four countries (US, Canada, Australia, New Zealand) that have used the same costing methodology; the original Nursing Turnover Cost Calculation Methodology. Measuring and comparing the costs and rates of turnover is difficult because of differences in definitions and methodologies. Comparative review. Searches were carried out within CINAHL, Business Source Complete and Medline for studies that used the original Nursing Turnover Cost Calculation Methodology and reported on both costs and rates of nurse turnover, published from 2014 and prior. A comparative review of turnover data was conducted using four studies that employed the original Nursing Turnover Cost Calculation Methodology. Costing data items were converted to percentages, while total turnover costs were converted to US 2014 dollars and adjusted according to inflation rates, to permit cross-country comparisons. Despite using the same methodology, Australia reported significantly higher turnover costs ($48,790) due to higher termination (~50% of indirect costs) and temporary replacement costs (~90% of direct costs). Costs were almost 50% lower in the US ($20,561), Canada ($26,652) and New Zealand ($23,711). Turnover rates also varied significantly across countries with the highest rate reported in New Zealand (44·3%) followed by the US (26·8%), Canada (19·9%) and Australia (15·1%). A significant proportion of turnover costs are attributed to temporary replacement, highlighting the importance of nurse retention. The authors suggest a minimum dataset is also required to eliminate potential variability across countries, states, hospitals and departments. © 2014 John Wiley & Sons Ltd.

Teleradiology from the provider's perspective-cost analysis for a mid-size university hospital.

PubMed

Rosenberg, Christian; Kroos, Kristin; Rosenberg, Britta; Hosten, Norbert; Flessa, Steffen

2013-08-01

Real costs of teleradiology services have not been systematically calculated. Pricing policies are not evidence-based. This study aims to prove the feasibility of performing an original cost analysis for teleradiology services and show break-even points to perform cost-effective practice. Based on the teleradiology services provided by the Greifswald University Hospital in northeastern Germany, a detailed process analysis and an activity-based costing model revealed costs per service unit according to eight examination categories. The Monte Carlo method was used to simulate the cost amplitude and identify pricing thresholds. Twenty-two sub-processes and four staff categories were identified. The average working time for one unit was 55 (x-ray) to 72 min (whole-body CT). Personnel costs were dominant (up to 68 %), representing lower limit costs. The Monte Carlo method showed the cost distribution per category according to the deficiency risk. Avoiding deficient pricing by a likelihood of 90 % increased the cost of a cranial CT almost twofold as compared with the lower limit cost. Original cost analysis is possible when providing teleradiology services with complex statutory requirements in place. Methodology and results provide useful data to help enhance efficiency in hospital management as well as implement realistic reimbursement fees. • Analysis of original costs of teleradiology is possible for a providing hospital • Results discriminate pricing thresholds and lower limit costs to perform cost-effective practice • The study methods represent a managing tool to enhance efficiency in providing facilities • The data are useful to help represent telemedicine services in regular medical fee schedules.

Net costs of health worker rural incentive packages: an example from the Lao People's Democratic Republic.

PubMed

Keuffel, Eric; Jaskiewicz, Wanda; Paphassarang, Chanthakhath; Tulenko, Kate

2013-11-01

Many developing countries are examining whether to institute incentive packages that increase the share of health workers who opt to locate in rural settings; however, uncertainty exists with respect to the expected net cost (or benefit) from these packages. We utilize the findings from the discrete choice experiment surveys applied to students training to be health professionals and costing analyses in Lao People's Democratic Republic to model the anticipated effect of incentive packages on new worker location decisions and direct costs. Incorporating evidence on health worker density and health outcomes, we then estimate the expected 5-year net cost (or benefit) of each incentive packages for 3 health worker cadres--physicians, nurses/midwives, and medical assistants. Under base case assumptions, the optimal incentive package for each cadre produced a 5-year net benefit (maximum net benefit for physicians: US$ 44,000; nurses/midwives: US$ 5.6 million; medical assistants: US$ 485,000). After accounting for health effects, the expected net cost of select incentive packages would be substantially less than the original estimate of direct costs. In the case of Lao People's Democratic Republic, incentive packages that do not invest in capital-intensive components generally should produce larger net benefits. Combining discrete choice experiment surveys, costing surveys and cost-benefit analysis methods may be replicated by other developing countries to calculate whether health worker incentive packages are viable policy options.

Comparison of multihardware parallel implementations for a phase unwrapping algorithm

NASA Astrophysics Data System (ADS)

Hernandez-Lopez, Francisco Javier; Rivera, Mariano; Salazar-Garibay, Adan; Legarda-Sáenz, Ricardo

2018-04-01

Phase unwrapping is an important problem in the areas of optical metrology, synthetic aperture radar (SAR) image analysis, and magnetic resonance imaging (MRI) analysis. These images are becoming larger in size and, particularly, the availability and need for processing of SAR and MRI data have increased significantly with the acquisition of remote sensing data and the popularization of magnetic resonators in clinical diagnosis. Therefore, it is important to develop faster and accurate phase unwrapping algorithms. We propose a parallel multigrid algorithm of a phase unwrapping method named accumulation of residual maps, which builds on a serial algorithm that consists of the minimization of a cost function; minimization achieved by means of a serial Gauss-Seidel kind algorithm. Our algorithm also optimizes the original cost function, but unlike the original work, our algorithm is a parallel Jacobi class with alternated minimizations. This strategy is known as the chessboard type, where red pixels can be updated in parallel at same iteration since they are independent. Similarly, black pixels can be updated in parallel in an alternating iteration. We present parallel implementations of our algorithm for different parallel multicore architecture such as CPU-multicore, Xeon Phi coprocessor, and Nvidia graphics processing unit. In all the cases, we obtain a superior performance of our parallel algorithm when compared with the original serial version. In addition, we present a detailed comparative performance of the developed parallel versions.

Descriptive analysis of childbirth healthcare costs in an area with high levels of immigration in Spain

PubMed Central

2011-01-01

Background The aim of this study was to estimate the cost of childbirth in a teaching hospital in Barcelona, Spain, including the costs of prenatal care, delivery and postnatal care (3 months). Costs were assessed by taking into account maternal origin and delivery type. Methods We performed a cross-sectional study of all deliveries in a teaching hospital to mothers living in its catchment area between October 2006 and September 2007. A process cost analysis based on a full cost accounting system was performed. The main information sources were the primary care program for sexual and reproductive health, and hospital care and costs records. Partial and total costs were compared according to maternal origin and delivery type. A regression model was fit to explain the total cost of the childbirth process as a function of maternal age and origin, prenatal care, delivery type, maternal and neonatal severity, and multiple delivery. Results The average cost of childbirth was 4,328€, with an average of 18.28 contacts between the mother or the newborn and the healthcare facilities. The delivery itself accounted for more than 75% of the overall cost: maternal admission accounted for 57% and neonatal admission for 20%. Prenatal care represented 18% of the overall cost and 75% of overall acts. The average overall cost was 5,815€ for cesarean sections, 4,064€ for vaginal instrumented deliveries and 3,682€ for vaginal non-instrumented deliveries (p < 0.001). The regression model explained 45.5% of the cost variability. The incremental cost of a delivery through cesarean section was 955€ (an increase of 31.9%) compared with an increase of 193€ (6.4%) for an instrumented vaginal delivery. The incremental cost of admitting the newborn to hospital ranged from 420€ (14.0%) to 1,951€ (65.2%) depending on the newborn's severity. Age, origin and prenatal care were not statistically significant or economically relevant. Conclusions Neither immigration nor prenatal care were associated with a substantial difference in costs. The most important predictors of cost were delivery type and neonatal severity. Given the impact of cesarean sections on the overall cost of childbirth, attempts should be made to take into account its higher cost in the decision of performing a cesarean section. PMID:21492486

Descriptive analysis of childbirth healthcare costs in an area with high levels of immigration in Spain.

PubMed

Comas, Mercè; Català, Laura; Sala, Maria; Payà, Antoni; Sala, Assumpció; Del Amo, Elisabeth; Castells, Xavier; Cots, Francesc

2011-04-15

The aim of this study was to estimate the cost of childbirth in a teaching hospital in Barcelona, Spain, including the costs of prenatal care, delivery and postnatal care (3 months). Costs were assessed by taking into account maternal origin and delivery type. We performed a cross-sectional study of all deliveries in a teaching hospital to mothers living in its catchment area between October 2006 and September 2007. A process cost analysis based on a full cost accounting system was performed. The main information sources were the primary care program for sexual and reproductive health, and hospital care and costs records. Partial and total costs were compared according to maternal origin and delivery type. A regression model was fit to explain the total cost of the childbirth process as a function of maternal age and origin, prenatal care, delivery type, maternal and neonatal severity, and multiple delivery. The average cost of childbirth was 4,328€, with an average of 18.28 contacts between the mother or the newborn and the healthcare facilities. The delivery itself accounted for more than 75% of the overall cost: maternal admission accounted for 57% and neonatal admission for 20%. Prenatal care represented 18% of the overall cost and 75% of overall acts. The average overall cost was 5,815€ for cesarean sections, 4,064€ for vaginal instrumented deliveries and 3,682€ for vaginal non-instrumented deliveries (p < 0.001). The regression model explained 45.5% of the cost variability. The incremental cost of a delivery through cesarean section was 955€ (an increase of 31.9%) compared with an increase of 193€ (6.4%) for an instrumented vaginal delivery. The incremental cost of admitting the newborn to hospital ranged from 420€ (14.0%) to 1,951€ (65.2%) depending on the newborn's severity. Age, origin and prenatal care were not statistically significant or economically relevant. Neither immigration nor prenatal care were associated with a substantial difference in costs. The most important predictors of cost were delivery type and neonatal severity. Given the impact of cesarean sections on the overall cost of childbirth, attempts should be made to take into account its higher cost in the decision of performing a cesarean section.

COMPLEAT (Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies): A planning tool for publicly owned electric utilities. [Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies (Compleat)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-09-01

COMPLEAT takes its name, as an acronym, from Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies. It is an electric utility planning model designed for use principally by publicly owned electric utilities and agencies serving such utilities. As a model, COMPLEAT is significantly more full-featured and complex than called out in APPA's original plan and proposal to DOE. The additional complexity grew out of a series of discussions early in the development schedule, in which it became clear to APPA staff and advisors that the simplicity characterizing the original plan, while highly desirable in terms of utility applications, wasmore » not achievable if practical utility problems were to be addressed. The project teams settled on Energy 20/20, an existing model developed by Dr. George Backus of Policy Assessment Associates, as the best candidate for the kinds of modifications and extensions that would be required. The remainder of the project effort was devoted to designing specific input data files, output files, and user screens and to writing and testing the compute programs that would properly implement the desired features around Energy 20/20 as a core program. This report presents in outline form, the features and user interface of COMPLEAT.« less

Compound Separation

NASA Technical Reports Server (NTRS)

1981-01-01

Jet Propulsion Laboratory developed a new one-step liquid-liquid extraction technique which cuts processing time, reduces costs and eliminates much of the equipment required. Technique employs disposable extraction columns, originally developed as an aid to the Los Angeles Police Department, which allow more rapid detection of drugs as part of the department's drug abuse program. Applications include medical treatment, pharmaceutical preparation and forensic chemistry. NASA waived title to Caltech, and Analytichem International is producing Extubes under Caltech license.

Transferring results of occupational safety and health cost-effectiveness studies from one country to another - a case study.

PubMed

Verbeek, Jos; Pulliainen, Marjo; Kankaanpää, Eila; Taimela, Simo

2010-06-01

There are a limited number of studies about the cost-effectiveness of occupational health and safety (OSH) interventions. Applying the results of a cost-effectiveness study from one country to another is hampered by differences in the organization of healthcare and social security. In order to find out how these problems can be overcome, we transferred the results of a Dutch occupational cost-effectiveness study to the Finnish situation and vice-versa. We recalculated incremental cost-effectiveness ratios (ICER) for the target country based on resource use in the original study and the associated costs in the target country. We also allocated the costs to the employer, the employee, and tax-payers. We found that the ICER did not differ very much from those in the original studies. However, the different healthcare funding structure led to a more unfavorable ICER for employers in the Netherlands. Both interventions represented a cost saving for tax-payers and employees. Employers had to invest euro10-54 to avert one day of sick leave. We conclude that results of cost-effectiveness studies can be transferred from one country to another, but many adjustments are needed. An extensive description of the intervention, a detailed list of resource use, allocation of costs to various parties, and detailed knowledge of the healthcare systems in the original studies are necessary to enable calculations.

Design, fabrication, test, qualification and price analysis for third generation design solar cell modules

NASA Technical Reports Server (NTRS)

1980-01-01

An updated program plan is presented showing the task descriptions depicting the work, progress, achievements, and the cause of any deviations from the original plan (SC-1), and how this impacted on the original schedule of the program. In addition there is an update documenting all design alterations made during the pre-production phase and a complete up to date set of engineering and manufacturing documentation (CM-1). The purpose of the work in the original plan was to explore, design, develop, test, and deliver 1000 watts of prototype flat plate, photovoltaic modules appropriate for use in applications in the 20 to 500 kilowatt range and which show potential for meeting the 1986 cost goals.

Costs and Benefits of Electronic Fetal Monitoring: A Review of the Literature. NCHSR Research Report Series.

ERIC Educational Resources Information Center

Banta, H. David; Thacker, Stephen B.

This report focuses on electronic fetal monitoring (EFM)--a technology that was developed during the 1960s and has rapidly spread into use in clinical obstetrics. The report includes a review of the extensive published literature on EFM and related subjects. It also contains original calculations concerning the technique's specificity and…

Least-cost control of agricultural nutrient contributions to the Gulf of Mexico hypoxic zone.

PubMed

Rabotyagov, Sergey; Campbell, Todd; Jha, Manoj; Gassman, Philip W; Arnold, Jeffrey; Kurkalova, Lyubov; Secchi, Silvia; Feng, Hongli; Kling, Catherine L

2010-09-01

In 2008, the hypoxic zone in the Gulf of Mexico, measuring 20 720 km2, was one of the two largest reported since measurement of the zone began in 1985. The extent of the hypoxic zone is related to nitrogen and phosphorous loadings originating on agricultural fields in the upper Midwest. This study combines the tools of evolutionary computation with a water quality model and cost data to develop a trade-off frontier for the Upper Mississippi River Basin specifying the least cost of achieving nutrient reductions and the location of the agricultural conservation practices needed. The frontier allows policymakers and stakeholders to explicitly see the trade-offs between cost and nutrient reductions. For example, the cost of reducing annual nitrate-N loadings by 30% is estimated to be US$1.4 billion/year, with a concomitant 36% reduction in P and the cost of reducing annual P loadings by 30% is estimated to be US$370 million/year, with a concomitant 9% reduction in nitrate-N.

Design and development of the coaxial scanner as a compact high-performance thermal imager

NASA Astrophysics Data System (ADS)

Lettington, Alan H.

1994-09-01

This paper describes the original requirement of a light weight, high performance, low cost thermal imager which resulted in the design of the novel coaxial scanner. The early form of imager used a dedicated display to match the original cyclic scan sequence. With the advent of fast digital scan converters and the desire to use standard TV monitors the imager was redesigned and new TV compatible scan sequences devised. A version of this scanner is currently being manufactured by GEC Marconi Avionics, UK, and the paper concludes with examples of its application.

Recruitment Strategies and Costs Associated with Community-Based Research in a Mexican-Origin Population

ERIC Educational Resources Information Center

Mendez-Luck, Carolyn A.; Trejo, Laura; Miranda, Jeanne; Jimenez, Elizabeth; Quiter, Elaine S.; Mangione, Carol M.

2011-01-01

Purpose: We describe the recruitment strategies and personnel and materials costs associated with two community-based research studies in a Mexican-origin population. We also highlight the role that academic-community partnerships played in the outreach and recruitment process for our studies. We reviewed study documents using case study…

34 CFR 685.303 - Processing loan proceeds.

Code of Federal Regulations, 2014 CFR

2014-07-01

... originating a loan to cover the cost of attendance in a study abroad program and has a Direct Loan Program... an eligible home institution originating a loan to cover the cost of attendance in a study abroad... the first year of an undergraduate program of study and has not previously received a Direct...

18 CFR 4.3 - Report on project cost.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Report on project cost... OF PROJECT COSTS Determination of Cost of Projects Constructed Under License § 4.3 Report on project..., cost records, engineering reports, and other records supporting the project's original cost. The audit...

18 CFR 4.3 - Report on project cost.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Report on project cost... OF PROJECT COSTS Determination of Cost of Projects Constructed Under License § 4.3 Report on project..., cost records, engineering reports, and other records supporting the project's original cost. The audit...

18 CFR 4.3 - Report on project cost.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Report on project cost... OF PROJECT COSTS Determination of Cost of Projects Constructed Under License § 4.3 Report on project..., cost records, engineering reports, and other records supporting the project's original cost. The audit...

18 CFR 4.3 - Report on project cost.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Report on project cost... OF PROJECT COSTS Determination of Cost of Projects Constructed Under License § 4.3 Report on project..., cost records, engineering reports, and other records supporting the project's original cost. The audit...

Low-cost directionally-solidified turbine blades, volume 1

NASA Technical Reports Server (NTRS)

Sink, L. W.; Hoppin, G. S., III; Fujii, M.

1979-01-01

A low cost process of manufacturing high stress rupture strength directionally-solidified high pressure turbine blades was successfully developed for the TFE731-3 Turbofan Engine. The basic processing parameters were established using MAR-M 247 and employing the exothermic directional-solidification process in trial castings of turbine blades. Nickel-based alloys were evaluated as directionally-solidified cast blades. A new turbine blade, disk, and associated components were then designed using previously determined material properties. Engine tests were run and the results were analyzed and compared to the originally established goals. The results showed that the stress rupture strength of exothermically heated, directionally-solidified MAR-M 247 turbine blades exceeded program objectives and that the performance and cost reduction goals were achieved.

HOW DO IMMIGRANTS SPEND THEIR TIME?

PubMed Central

Hamermesh, Daniel S.

2012-01-01

Sharp differences in time use by nativity emerge when activities are distinguished by incidence and intensity in recent U.S. data. A model with daily fixed costs for assimilating activities predicts immigrants are less likely than natives to undertake such activities on a given day; but those who do will spend relatively more time on them. Activities such as purchasing, education, and market work conform to the model. Other results suggest that fixed costs for assimilating activities are higher for immigrants with poor English proficiency or who originate in less developed countries. An analysis of comparable Australian data yields similar results. PMID:24443631

The effect of new drug pricing systems and new reimbursement guidelines on pharmaceutical expenditures and prescribing behavior among hypertensive patients in Korea.

PubMed

Cho, Mee-Hyun; Yoo, Ki-Bong; Lee, Hoo-Yeon; Lee, Kwang-Sig; Kwon, Jeoung A; Han, Kyu-Tae; Kim, Jae-Hyun; Park, Eun-Cheol

2015-05-01

The purpose of this study was to determine the effects of a new drug-pricing system (January 2012) and new prescription and reimbursement guidelines (January 2013) on hypertension-related pharmaceutical expenditures and prescribing behaviors in Korea. In all, 11,298 clinics and 2,667,132 patients with hypertension were included in our study. As dependent variables, we used the drug cost per patient, drug cost per prescribed day, number of drugs per prescription, number of prescribed days per visit, number of visits, number of original (vs. generic) drugs prescribed, and the percentage of original drug cost. Clinic characteristics and patients' age and sex were used as independent variables. Multi-level mixed-effect regression models were used. The drug cost per patient decreased by -1446 KRW$ (-7.4%; p<0.001) in Q4 2012 and by -1833 (-9.3%; p<0.001) in Q2 2013 compared with Q4 2011. Number of drugs per prescription decreased significantly. The percentage of original drug cost and the number of original drugs also declined. Reforms to the drug pricing policy and the new guidelines may reduce pharmaceutical expenditures without increasing number of drugs per prescription and the number of original drug used. Policy makers should consider the comprehensive effects of implementing new policies on both drug prices and consumption. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Low-Cost Servomotor Driver for PFM Control

PubMed Central

Aragon-Jurado, David

2017-01-01

Servomotors have already been around for some decades and they are extremely popular among roboticists due to their simple control technique, reliability and low-cost. They are usually controlled by using Pulse Width Modulation (PWM) and this paper aims to keep the idea of simplicity and low-cost, while introducing a new control technique: Pulse Frequency Modulation (PFM). The objective of this paper is to focus on our development of a low-cost servomotor controller which will allow the research community to use them with PFM. A low-cost commercial servomotor is used as the base system for the development: a small PCB that fits inside the case and allocates all the electronic components to control the motor has been designed to replace the original. The potentiometer is retained as the feedback sensor and a microcontroller is responsible for controlling the position of the motor. The paper compares the performance of a PWM and a PFM controlled servomotor. The comparison shows that the servomotor with our controller achieves a faster mechanism for switching targets and a lower latency. This controller can be used with neuromorphic systems to remove the conversion from events to PWM. PMID:29301221

Low-Cost Servomotor Driver for PFM Control.

PubMed

Aragon-Jurado, David; Morgado-Estevez, Arturo; Perez-Peña, Fernando

2017-12-31

Servomotors have already been around for some decades and they are extremely popular among roboticists due to their simple control technique, reliability and low-cost. They are usually controlled by using Pulse Width Modulation (PWM) and this paper aims to keep the idea of simplicity and low-cost, while introducing a new control technique: Pulse Frequency Modulation (PFM). The objective of this paper is to focus on our development of a low-cost servomotor controller which will allow the research community to use them with PFM. A low-cost commercial servomotor is used as the base system for the development: a small PCB that fits inside the case and allocates all the electronic components to control the motor has been designed to replace the original. The potentiometer is retained as the feedback sensor and a microcontroller is responsible for controlling the position of the motor. The paper compares the performance of a PWM and a PFM controlled servomotor. The comparison shows that the servomotor with our controller achieves a faster mechanism for switching targets and a lower latency. This controller can be used with neuromorphic systems to remove the conversion from events to PWM.

NASA LaRC Hazardous Material Pharmacy

NASA Technical Reports Server (NTRS)

Esquenet, Remy

1995-01-01

In 1993-1994 the Office of Environmental Engineering contracted SAIC to develop NASA Langley's Pollution Prevention (P2) Program. One of the priority projects identified in this contract was the development of a hazardous waste minimization (HAZMIN)/hazardous materials reutilization (HAZMART) program in the form of a Hazardous Materials Pharmacy. A hazardous materials pharmacy is designed to reduce hazardous material procurement costs and hazardous waste disposal costs. This is accomplished through the collection and reissue of excess hazardous material. Currently, a rarely used hazardous material may be stored in a shop area, unused, until it passes its expiration date. The material is then usually disposed of as a hazardous waste, often at a greater expense than the original cost of the material. While this material was on the shelf expiring, other shop areas may have ordered new supplies of the same material. The hazardous material pharmacy would act as a clearinghouse for such materials. Material that is not going to be used would be turned in to the pharmacy. Other users could then be issued this material free of charge, thereby reducing procurement costs. The use of this material by another shop prevents it from expiring, thereby reducing hazardous waste disposal costs.

Abatement vs. treatment for efficient diffuse source water pollution management in terrestrial-marine systems.

PubMed

Roebeling, P C; Cunha, M C; Arroja, L; van Grieken, M E

2015-01-01

Marine ecosystems are affected by water pollution originating from coastal catchments. The delivery of water pollutants can be reduced through water pollution abatement as well as water pollution treatment. Hence, sustainable economic development of coastal regions requires balancing of the marginal costs from water pollution abatement and/or treatment and the associated marginal benefits from marine resource appreciation. Water pollution delivery reduction costs are, however, not equal across abatement and treatment options. In this paper, an optimal control approach is developed and applied to explore welfare maximizing rates of water pollution abatement and/or treatment for efficient diffuse source water pollution management in terrestrial-marine systems. For the case of diffuse source dissolved inorganic nitrogen water pollution in the Tully-Murray region, Queensland, Australia, (agricultural) water pollution abatement cost, (wetland) water pollution treatment cost and marine benefit functions are determined to explore welfare maximizing rates of water pollution abatement and/or treatment. Considering partial (wetland) treatment costs and positive water quality improvement benefits, results show that welfare gains can be obtained, primarily, through diffuse source water pollution abatement (improved agricultural management practices) and, to a minor extent, through diffuse source water pollution treatment (wetland restoration).

Advanced Space Transportation Program (ASTP)

NASA Image and Video Library

1995-01-23

Pictured here is a DC-XA Reusable Launch Vehicle (RLV) prototype concept with an RLV logo. The Delta Clipper-Experimental (DC-X) was originally developed by McDornell Douglas for the Department of Defense (DOD). The DC-XA is a single-stage-to-orbit, vertical takeoff/vertical landing, launch vehicle concept, whose development is geared to significantly reduce launch costs and will provide a test bed for NASA Reusable Launch Vehicle (RLV) technology as the Delta Clipper-Experimental Advanced (DC-XA).

FTR GO14246

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bentley, Martha

2008-06-30

The Maine Forest Bioproducts Research and Development project originally focused on the State’s interest in the development of an integrated forest products refinery (IFPR). The original intent was that Research and Development (R&D) funded by this award will allow Maine to refine its strategy and pursue development of an integrated biorefinery. Activities were to be divided into three major R&D projects: (a) Establish the potential for a forest products biorefinery in Maine, by determining the technical and economic feasibility and resource availability. (b) Investigate and develop conversion processes for forest bioproducts to utilize the sugars available from hemicellulose. Research projectsmore » will determine how to best utilize refinery waste streams to recover heat value and recycle remaining components. (c) Cost share very early stage R&D efforts to engage the private sector and stimulate innovative efforts that will build upon the research efforts in (b) above, utilize the information gleaned from (a), and lead to commercialization of new products or services and development of the forest bioproducts industrial sector in Maine.« less

Advanced system for 3D dental anatomy reconstruction and 3D tooth movement simulation during orthodontic treatment

NASA Astrophysics Data System (ADS)

Monserrat, Carlos; Alcaniz-Raya, Mariano L.; Juan, M. Carmen; Grau Colomer, Vincente; Albalat, Salvador E.

1997-05-01

This paper describes a new method for 3D orthodontics treatment simulation developed for an orthodontics planning system (MAGALLANES). We develop an original system for 3D capturing and reconstruction of dental anatomy that avoid use of dental casts in orthodontic treatments. Two original techniques are presented, one direct in which data are acquired directly form patient's mouth by mean of low cost 3D digitizers, and one mixed in which data are obtained by 3D digitizing of hydrocollids molds. FOr this purpose we have designed and manufactured an optimized optical measuring system based on laser structured light. We apply these 3D dental models to simulate 3D movement of teeth, including rotations, during orthodontic treatment. The proposed algorithms enable to quantify the effect of orthodontic appliance on tooth movement. The developed techniques has been integrated in a system named MAGALLANES. This original system present several tools for 3D simulation and planning of orthodontic treatments. The prototype system has been tested in several orthodontic clinic with very good results.

IDA Cost Research Symposium Held 25 May 1995.

DTIC Science & Technology

1995-08-01

Excel Spreadsheet Publications: MCR Report TR-9507/01 Category: II.B Keywords: Government, Estimating, Missiles, Analysis, Production, Data...originally developed by Martin Marietta as part of SASET software estimating model. To be implemented as part of SoftEST Software Estimating Tool...following documents to report the results of Its work. Reports Reports are the most authoritative and most carefully considered products IDA

The Use of Internet FAQs (Frequently Asked Questions) and Files as Cost-Effective Supplements to Textbooks and Substitutions for Photocopies.

ERIC Educational Resources Information Center

MacFarland, Thomas W.; Yates, Jan M.

Gaining access to current and high-quality curriculum resource materials has become more difficult due to escalation in the prices of textbooks and in rigid interpretations of copyright laws which limit photocopying. Internet Frequently Asked Questions (FAQs) and files may offer a partial solution. Originally developed for the benefit of Usenet…

Lunar COTS: An Economical and Sustainable Approach to Reaching Mars

NASA Technical Reports Server (NTRS)

Zuniga, Allison F.; Rasky, Daniel; Pittman, Robert B.; Zapata, Edgar; Lepsch, Roger

2015-01-01

The NASA COTS (Commercial Orbital Transportation Services) Program was a very successful program that developed and demonstrated cost-effective development and acquisition of commercial cargo transportation services to the International Space Station (ISS). The COTS acquisition strategy utilized a newer model than normally accepted in traditional procurement practices. This new model used Space Act Agreements where NASA entered into partnerships with industry to jointly share cost, development and operational risks to demonstrate new capabilities for mutual benefit. This model proved to be very beneficial to both NASA and its industry partners as NASA saved significantly in development and operational costs while industry partners successfully expanded their market share of the global launch transportation business. The authors, who contributed to the development of the COTS model, would like to extend this model to a lunar commercial services program that will push development of technologies and capabilities that will serve a Mars architecture and lead to an economical and sustainable pathway to transporting humans to Mars. Over the past few decades, several architectures for the Moon and Mars have been proposed and studied but ultimately halted or not even started due to the projected costs significantly exceeding NASA's budgets. Therefore a new strategy is needed that will fit within NASA's projected budgets and takes advantage of the US commercial industry along with its creative and entrepreneurial attributes. The authors propose a new COTS-like program to enter into partnerships with industry to demonstrate cost-effective, cis-lunar commercial services, such as lunar transportation, lunar ISRU operations, and cis-lunar propellant depots that can enable an economical and sustainable Mars architecture. Similar to the original COTS program, the goals of the proposed program, being notionally referred to as Lunar Commercial Orbital Transfer Services (LCOTS) program will be to: 1) reduce development and operational costs by sharing costs with industry; 2) create new markets in cis-lunar space to further reduce operational costs; and 3) enable NASA to develop an affordable and economical exploration Mars architecture. The paper will describe a plan for a proposed LCOTS program, its potential impact to an eventual Mars architecture and its many benefits to NASA, commercial space industry and the US economy.

Improvement of the cost-benefit analysis algorithm for high-rise construction projects

NASA Astrophysics Data System (ADS)

Gafurov, Andrey; Skotarenko, Oksana; Plotnikov, Vladimir

2018-03-01

The specific nature of high-rise investment projects entailing long-term construction, high risks, etc. implies a need to improve the standard algorithm of cost-benefit analysis. An improved algorithm is described in the article. For development of the improved algorithm of cost-benefit analysis for high-rise construction projects, the following methods were used: weighted average cost of capital, dynamic cost-benefit analysis of investment projects, risk mapping, scenario analysis, sensitivity analysis of critical ratios, etc. This comprehensive approach helped to adapt the original algorithm to feasibility objectives in high-rise construction. The authors put together the algorithm of cost-benefit analysis for high-rise construction projects on the basis of risk mapping and sensitivity analysis of critical ratios. The suggested project risk management algorithms greatly expand the standard algorithm of cost-benefit analysis in investment projects, namely: the "Project analysis scenario" flowchart, improving quality and reliability of forecasting reports in investment projects; the main stages of cash flow adjustment based on risk mapping for better cost-benefit project analysis provided the broad range of risks in high-rise construction; analysis of dynamic cost-benefit values considering project sensitivity to crucial variables, improving flexibility in implementation of high-rise projects.

RETHINKING THE ROLE OF CLINICAL TRIAL DATA IN INTERNATIONAL INTELLECTUAL PROPERTY LAW: THE CASE FOR A PUBLIC GOODS APPROACH.

PubMed

Reichman, Jerome H

2009-01-01

This article describes the growth and consequences of new intellectual property rights given to pharmaceutical developers, and it advocates treating clinical trials as a public good. Although the soaring cost of clinical trials is well known and discussed, too little attention is given to the underlying rationale for allowing drug developers to recoup their costs through the new intellectual property rights provided in multilateral, regional, and bilateral agreements. Known in the US as "market exclusivity" and in Europe as "data exclusivity," these rights prohibit would-be generic producers from obtaining regulatory approval based on the original producers' undisclosed test data. Market and data exclusivity is codified in US and European domestic law as well as the North American Free Trade Agreement (NAFTA) and, to a lesser degree, the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS). Market and data exclusivity is binding an increasing number of developing countries via Free Trade Agreements (FTAs), which hinder developing countries from manufacturing generic drugs. At a minimum, negotiators should replace the norm of exclusive control over data with a liability rule, or take and pay rule, in which generic manufacturers can use original manufacturers' clinical trial data in exchange for reasonable compensation. A more fundamental solution requires questioning the status quo of proprietary clinical trial data. The conventional wisdom is that market and data exclusivity, and drug developers' consequent ability to limit competition from generics above and beyond patent protection, are a necessary incentive for drug developers to fund ever more expensive clinical trials. Clinical trial data, however, are public goods that will be undersupplied and over protected so long as private actors provide them. Moreover, manufacturers have an incentive to present clinical trial data so that they support regulatory approval at the expense of public health. Although liability rules are better than the status quo, they would not resolve the problem of treating a public good as proprietary. Governments should thus oversee and fund clinical trials as the public good that they are. Clinical tests should be awarded to the most qualified scientists through a competitive process, financed in part with the decrease in drug costs to governmental health care programs and in part with drug developers' contributions, selected to maximize social benefit, and made global via intergovernmental bodies to maximize social return. This would reduce the cost of redundant investigations to the global public health system, lower supply costs to drug consumers, and lower the breakeven point for investment in research to discover new drugs.

Application of activity-based costing (ABC) for a Peruvian NGO healthcare provider.

PubMed

Waters, H; Abdallah, H; Santillán, D

2001-01-01

This article describes the application of activity-based costing (ABC) to calculate the unit costs of the services for a health care provider in Peru. While traditional costing allocates overhead and indirect costs in proportion to production volume or to direct costs, ABC assigns costs through activities within an organization. ABC uses personnel interviews to determine principal activities and the distribution of individual's time among these activities. Indirect costs are linked to services through time allocation and other tracing methods, and the result is a more accurate estimate of unit costs. The study concludes that applying ABC in a developing country setting is feasible, yielding results that are directly applicable to pricing and management. ABC determines costs for individual clinics, departments and services according to the activities that originate these costs, showing where an organization spends its money. With this information, it is possible to identify services that are generating extra revenue and those operating at a loss, and to calculate cross subsidies across services. ABC also highlights areas in the health care process where efficiency improvements are possible. Conclusions about the ultimate impact of the methodology are not drawn here, since the study was not repeated and changes in utilization patterns and the addition of new clinics affected applicability of the results. A potential constraint to implementing ABC is the availability and organization of cost information. Applying ABC efficiently requires information to be readily available, by cost category and department, since the greatest benefits of ABC come from frequent, systematic application of the methodology in order to monitor efficiency and provide feedback for management. The article concludes with a discussion of the potential applications of ABC in the health sector in developing countries.

Continuing Professional Development via Social Media or Conference Attendance: A Cost Analysis.

PubMed

Maloney, Stephen; Tunnecliff, Jacqueline; Morgan, Prue; Gaida, James; Keating, Jennifer; Clearihan, Lyn; Sadasivan, Sivalal; Ganesh, Shankar; Mohanty, Patitapaban; Weiner, John; Rivers, George; Ilic, Dragan

2017-03-30

Professional development is essential in the health disciplines. Knowing the cost and value of educational approaches informs decisions and choices about learning and teaching practices. The primary aim of this study was to conduct a cost analysis of participation in continuing professional development via social media compared with live conference attendance. Clinicians interested in musculoskeletal care were invited to participate in the study activities. Quantitative data were obtained from an anonymous electronic questionnaire. Of the 272 individuals invited to contribute data to this study, 150 clinicians predominantly from Australia, United States, United Kingdom, India, and Malaysia completed the outcome measures. Half of the respondents (78/150, 52.0%) believed that they would learn more with the live conference format. The median perceived participation costs for the live conference format was Aus $1596 (interquartile range, IQR 172.50-2852.00). The perceived cost of participation for equivalent content delivered via social media was Aus $15 (IQR 0.00-58.50). The majority of the clinicians (114/146, 78.1%, missing data n=4) indicated that they would pay for a subscription-based service, delivered by social media, to the median value of Aus $59.50. Social media platforms are evolving into an acceptable and financially sustainable medium for the continued professional development of health professionals. When factoring in the reduced costs of participation and the reduced loss of employable hours from the perspective of the health service, professional development via social media has unique strengths that challenge the traditional live conference delivery format. ©Stephen Maloney, Jacqueline Tunnecliff, Prue Morgan, James Gaida, Jennifer Keating, Lyn Clearihan, Sivalal Sadasivan, Shankar Ganesh, Patitapaban Mohanty, John Weiner, George Rivers, Dragan Ilic. Originally published in JMIR Medical Education (http://mededu.jmir.org), 30.03.2017.

Molecular descriptor subset selection in theoretical peptide quantitative structure-retention relationship model development using nature-inspired optimization algorithms.

PubMed

Žuvela, Petar; Liu, J Jay; Macur, Katarzyna; Bączek, Tomasz

2015-10-06

In this work, performance of five nature-inspired optimization algorithms, genetic algorithm (GA), particle swarm optimization (PSO), artificial bee colony (ABC), firefly algorithm (FA), and flower pollination algorithm (FPA), was compared in molecular descriptor selection for development of quantitative structure-retention relationship (QSRR) models for 83 peptides that originate from eight model proteins. The matrix with 423 descriptors was used as input, and QSRR models based on selected descriptors were built using partial least squares (PLS), whereas root mean square error of prediction (RMSEP) was used as a fitness function for their selection. Three performance criteria, prediction accuracy, computational cost, and the number of selected descriptors, were used to evaluate the developed QSRR models. The results show that all five variable selection methods outperform interval PLS (iPLS), sparse PLS (sPLS), and the full PLS model, whereas GA is superior because of its lowest computational cost and higher accuracy (RMSEP of 5.534%) with a smaller number of variables (nine descriptors). The GA-QSRR model was validated initially through Y-randomization. In addition, it was successfully validated with an external testing set out of 102 peptides originating from Bacillus subtilis proteomes (RMSEP of 22.030%). Its applicability domain was defined, from which it was evident that the developed GA-QSRR exhibited strong robustness. All the sources of the model's error were identified, thus allowing for further application of the developed methodology in proteomics.

MEMS-based microprojection system with a 1.5cc optical engine

NASA Astrophysics Data System (ADS)

Kilcher, Lucio; Abelé, Nicolas

2012-03-01

Lemoptix develops next-generation of Micro-Opto-Electromechanical Systems (MOEMS)-based laser scanning and microprojection technologies and products for professional and industrial applications. Lemoptix LSCAN laser scanning micromirrors are designed to be integrated by OEM (original equipment manufacturer) customers into a number of applications such as printers and industrial sensors, enhancing performances and enabling the development of smaller, higher resolution and lower cost products. Lemoptix MVIEW, world's smallest laser microprojection systems are ideal for integration by OEMs and ODMs (original design manufacturers) into various demanding applications such as headup displays in cars or mobile devices. Embedded MVIEW modules will enable the projection of content and information directly from the device on any nearby surface, enabling users to conveniently view and share information and content without the typical limitations of physical displays.

Biosimilars: it's not as simple as cost alone.

PubMed

Roger, S D; Goldsmith, D

2008-10-01

Biosimilars or follow-on biologics (FoB) are biopharmaceuticals that, unlike small molecule generic products, are copies of larger, much more complex proteins. As such, data generated from one biopharmaceutical cannot be extrapolated to another. Unlike small molecule generics, FoB require a full developmental programme, albeit smaller than for an originator product. This has been recognized by European regulatory authorities and it is becoming clear that accelerated processes for FoB marketing approval are not feasible. To determine the balance between costs surrounding FoB (including relatively extensive developmental programmes and subsequent price to the market) and the necessity to ensure efficacy and safety. It is important that FoB are sufficiently tested to ensure patient safety is not compromised. Conducting such a development programme followed by sound pharmacovigilance is very challenging and costly. Cost-savings associated with FoB may be limited.

47 CFR 32.2310 - Information origination/termination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.2310 Information origination/termination. This account shall be used by Class B companies to record the original cost of information origination/termination equipment of the type and character required of Class...

The nature of human aggression.

PubMed

Archer, John

2009-01-01

Human aggression is viewed from four explanatory perspectives, derived from the ethological tradition. The first consists of its adaptive value, which can be seen throughout the animal kingdom, involving resource competition and protection of the self and offspring, which has been viewed from a cost-benefit perspective. The second concerns the phylogenetic origin of aggression, which in humans involves brain mechanisms that are associated with anger and inhibition, the emotional expression of anger, and how aggressive actions are manifest. The third concerns the origin of aggression in development and its subsequent modification through experience. An evolutionary approach to development yields conclusions that are contrary to the influential social learning perspective, notably that physical aggression occurs early in life, and its subsequent development is characterized by learned inhibition. The fourth explanation concerns the motivational mechanisms controlling aggression: approached from an evolutionary background, these mechanisms range from the inflexible reflex-like responses to those incorporating rational decision-making.

Reduce on the Cost of Photovoltaic Power Generation for Polycrystalline Silicon Solar Cells by Double Printing of Ag/Cu Front Contact Layer

NASA Astrophysics Data System (ADS)

Peng, Zhuoyin; Liu, Zhou; Chen, Jianlin; Liao, Lida; Chen, Jian; Li, Cong; Li, Wei

2018-06-01

With the development of photovoltaic industry, the cost of photovoltaic power generation has become the significant issue. And the metallization process has decided the cost of original materials and photovoltaic efficiency of the solar cells. Nowadays, double printing process has been introduced instead of one-step printing process for front contact of polycrystalline silicon solar cells, which can effectively improve the photovoltaic conversion efficiency of silicon solar cells. Here, the relative cheap Cu paste has replaced the expensive Ag paste to form Ag/Cu composite front contact of silicon solar cells. The photovoltaic performance and the cost of photovoltaic power generation have been investigated. With the optimization on structure and height of Cu finger layer for Ag/Cu composite double-printed front contact, the silicon solar cells have exhibited a photovoltaic conversion efficiency of 18.41%, which has reduced 3.42 cent per Watt for the cost of photovoltaic power generation.

41 CFR 102-36.190 - Must we always pay 25 percent of the original acquisition cost when furnishing excess personal...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Must we always pay 25 percent of the original acquisition cost when furnishing excess personal property to project grantees? 102-36.190 Section 102-36.190 Public Contracts and Property Management Federal Property Management...

78 FR 44424 - Revisions to Page 700 of FERC Form No. 6

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-24

... original cost (TOC) rate base information provided on line 5 of page 700 by requiring the reporting of the three subparts of the TOC rate base: (1) Rate Base--Original Cost (proposed line 5a); (2) Rate Base... oil pipeline's TOC Rate Base. Consequently, the NOPR proposed to move the TOC rate base from line 5 to...

On the Origins of the Task Mixing Cost in the Cuing Task-Switching Paradigm

ERIC Educational Resources Information Center

Rubin, Orit; Meiran, Nachshon

2005-01-01

Poorer performance in conditions involving task repetition within blocks of mixed tasks relative to task repetition within blocks of single task is called mixing cost (MC). In 2 experiments exploring 2 hypotheses regarding the origins of MC, participants either switched between cued shape and color tasks, or they performed them as single tasks.…

Assessment of the Economic Impact of Belimumab for the Treatment of Systemic Lupus Erythematosus in the Italian Setting: A Cost-Effectiveness Analysis.

PubMed

Pierotti, Francesca; Palla, Ilaria; Treur, Maarten; Pippo, Lara; Turchetti, Giuseppe

2015-01-01

The purpose of this analysis is to evaluate the cost-effectiveness of belimumab, a new biological treatment specifically developed for the treatment of Systemic Lupus Erythematosus (SLE), in the Italian setting. SLE is a chronic non-organ specific autoimmune disease characterized by a disregulation of the immune system that involves many organs and systems. A cost-effectiveness micro-simulation model with a lifetime horizon originally developed for the UK was adapted to the Italian setting. The analysis compared Standard of Care (SoC) alone vs belimumab plus SoC from a National Healthcare Service (NHS) and societal perspective. Health-economic consequences of treatments and organ damage progression were calculated. When available, Italian data were used, otherwise UK costs were converted using Purchasing Power Parities (PPPs). Utility values were based on the EQ-5D™ assessments in the belimumab clinical trials (BLISS 52 and 76). Results were discounted with 3% for costs and effects. A maximum belimumab treatment duration of 6 years was assumed and wastage costs were considered. Cost per life year gained (Incremental Cost-Effectiveness Ratio, ICER) and cost per Quality Adjusted Life Year (QALY) (Incremental Cost-Utility Ratio, ICUR) were €22,990 and €32,859, respectively. These values reduced to €20,119 and €28,754, respectively, when indirect costs were included. It may be concluded that in the Italian setting and according to the guidelines of the Italian Association of Health Economics (IAHE), belimumab was shown to be cost-effective, in terms of both ICER and ICUR, (€25-40,000/QALY).

Determination of Optimal Subsidy for Materials Saving Investment through Recycle/Recovery at Industrial Level

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.

2009-08-01

This work deals with a methodological framework under the form of a simple/short algorithmic procedure (including 11 activity steps and 3 decision nodes) designed/developed for the determination of optimal subsidy for materials saving investment through recycle/recovery (RR) at industrial level. Two case examples are presented, covering both aspects, without and with recycling. The expected Relative Cost Decrease (RCD) because of recycling, which forms a critical index for decision making on subsidizing, is estimated. The developed procedure can be extended outside the industrial unit to include collection/transportation/processing of recyclable wasted products. Since, in such a case, transportation cost and processing cost are conflict depended variables (when the quantity collected/processed Q is the independent/explanatory variable), the determination of Qopt is examined under energy crises conditions, when corresponding subsidies might be granted to re-set the original equilibrium and avoid putting the recycling enterprise in jeopardize due to dangerous lowering of the first break-even point.

High-performance, low-cost solar collectors for disinfection of contaminated water.

PubMed

Vidal, A; Diaz, A I

2000-01-01

Although the germicidal action of sunlight has long been recognized, its potential for practical applications has to be researched more thoroughly. This paper summarizes the progress made toward a commercially practical collector for solar disinfection applications. Nontracking compound parabolic collectors (CPCs), developed originally for capturing solar photons for thermal energy applications, were examined as potential solar photoreactors. A field demonstration of solar disinfection treatment using commercially manufactured solar reactors was conducted. Field tests showed successful destruction of Escherichia coli and Enterococcus faecalis and have provided data for full-scale design of water treatment systems. From above observations, a throughput value of 50 L/m2 h for the low-cost CPC reactor tested was estimated. For a 190 m3/d (0.05 MGD) facility, the estimated total costs for disinfection using UV-A is U.S. $0.19/m3 ($0.70/1000 gal). The use of near-UV sunlight to disinfect water supplies seems promising in rural communities of developing countries where treated water is unavailable.

Global cost of child survival: estimates from country-level validation

PubMed Central

van Ekdom, Liselore; Scherpbier, Robert W; Niessen, Louis W

2011-01-01

Abstract Objective To cross-validate the global cost of scaling up child survival interventions to achieve the fourth Millennium Development Goal (MDG4) as estimated by the World Health Organization (WHO) in 2007 by using the latest country-provided data and new assumptions. Methods After the main cost categories for each country were identified, validation questionnaires were sent to 32 countries with high child mortality. Publicly available estimates for disease incidence, intervention coverage, prices and resources for individual-level and programme-level activities were validated against local data. Nine updates to the 2007 WHO model were generated using revised assumptions. Finally, estimates were extrapolated to 75 countries and combined with cost estimates for immunization and malaria programmes and for programmes for the prevention of mother-to-child transmission of the human immunodeficiency virus (HIV). Findings Twenty-six countries responded. Adjustments were largest for system- and programme-level data and smallest for patient data. Country-level validation caused a 53% increase in original cost estimates (i.e. 9 billion 2004 United States dollars [US$]) for 26 countries owing to revised system and programme assumptions, especially surrounding community health worker costs. The additional effect of updated population figures was small; updated epidemiologic figures increased costs by US$ 4 billion (+15%). New unit prices in the 26 countries that provided data increased estimates by US$ 4.3 billion (+16%). Extrapolation to 75 countries increased the original price estimate by US$ 33 billion (+80%) for 2010–2015. Conclusion Country-level validation had a significant effect on the cost estimate. Price adaptations and programme-related assumptions contributed substantially. An additional 74 billion US$ 2005 (representing a 12% increase in total health expenditure) would be needed between 2010 and 2015. Given resource constraints, countries will need to prioritize health activities within their national resource envelope. PMID:21479091

Reduction of Martian Sample Return Mission Launch Mass with Solar Sail Propulsion

NASA Technical Reports Server (NTRS)

Russell, Tiffany E.; Heaton, Andy F.; Young, Roy; Baysinger, Mike; Schnell, Andrew R.

2013-01-01

Solar sails have the potential to provide mass and cost savings for spacecraft traveling within the innter solar system. Companies like L'Garde have demonstrated sail manufacturability and various i-space development methods. The purpose of this study was to evaluate a current Mars sample return architecture and to determine how cost and mass would be reduced by incorporating a solar sail propulsion system. The team validated the design proposed by L'Garde, and scaled the design based on a trajectory analysis. Using the solar sail design reduced the required mass, eliminating one of the three launches required in the original architecture.

Move to outpatient settings may boost medical hotels.

PubMed

Burns, J

1992-06-08

The shift of surgeries to outpatient settings could be healthy for medical hotels, those amenity-equipped facilities originally developed to ease patients out of costly acute-care beds. Because fewer hospitals have a pressing need to use such alternative lodging, some medical hotels are hoping to hitch their fortunes to the outpatient trade, keeping patients overnight after surgeries that don't require hospital admission.

DOD Major Automated Information Systems: Improvements Can Be Made in Reporting Critical Changes and Clarifying Leadership Responsibility

DTIC Science & Technology

2016-03-01

The program’s estimated program development cost increased by 45 percent over the original acquisition program baseline due to program scope changes ...DOD MAJOR AUTOMATED INFORMATION SYSTEMS Improvements Can Be Made in Reporting Critical Changes and Clarifying...INFORMATION SYSTEMS Improvements Can Be Made in Reporting Critical Changes and Clarifying Leadership Responsibility Why GAO Did This Study The National

Development of a Cost Effective Organization Model for the Shipbuilding Welder Labor Workforce

DTIC Science & Technology

2009-09-01

nation and intercept and destroy enem y aircraft under al l weather conditions (T/O 8840, 1990). The m ission statem ent is a set of generalized...lter the cou rse of the original pl an. In essence, no plan ever s urvives firs t contact with the enemy, and the enem y, in this case is m ulti

Budget impact analysis on erythropoiesis-stimulating agents use for the management of chemotherapy-induced anaemia in Greece.

PubMed

Nikolaidi, Eleftheria; Hatzikou, Magdalini; Geitona, Mary

2013-07-16

Chemotherapy-induced anaemia is a common and significant complication of chemotherapy treatment. Blood transfusion and administration of Erythropoiesis-Stimulating Agents (ESAs) either alone or in combination with iron are the most widely used therapeutic options. In Greece, ESAs are among the top ten therapeutic groups with the highest pharmaceutical expenditure, since they are fully reimbursed by social security funds. The objective of the study is to determine potential cost savings related with the use of biosimilar over originator ESAs for the management of the newly diagnosed chemotherapy-induced anemic patients. A budget impact analysis has been carried through the elaboration of national epidemiological, clinical and economic data. Epidemiological data derived from WHO (GLOBOCAN) and the European Cancer Anaemia Survey. Clinical data reflect oncology patients' disease management. ESAs consumption was based on data from the biggest social security fund (IKA). The administration of ESAs under different dosing schemes and time periods has been estimated by separating them in originators and biosimilars as well as by classifying anaemic patients in responders and non-responders. Cost analysis is based on newly diagnosed patients' alternative treatment scenarios. Treatment costs and prices are used in 2012 values. The Social Security Funds's perspective was undertaken. Based on the annual incidence rates, 2.551 newly diagnosed chemotherapy-induced anemic patients are expected to be treated with ESAs. Average cost of treatment on originators ESAs for responders is €2.887 for the 15-week ESAs treatment and €5.019 for non-responders, while on biosimilars €2.623 and €4.009 respectively. Treatment cost on biosimilars is 10.1% lower than originators for responders and 25.2% for non-responders. Budget impact estimates show that treating anemic patients with originator ESAs was estimated at €10.084.800 compared to €8.460.119 when biosimilar ESAs were used, leading to an overall 19,20% cost reduction favoring biosimilars. In Greece, the treatment on biosimilar ESAs seems to be a cost saving option over originators for the newly diagnosed chemotherapy-induced anemic patients, since it corresponds to 5% of the annual overall consumption and expands patients' access to ESAs treatment. Health care decision making should rely on evidence based treatments in order to achieve social funds' sustainability in an era of economic recession.

National surveillance and control costs for highly pathogenic avian influenza H5N1 in poultry: A benefit-cost assessment for a developing economy, Nigeria.

PubMed

Fasanmi, Olubunmi G; Kehinde, Olugbenga O; Laleye, Agnes T; Ekong, Bassey; Ahmed, Syed S U; Fasina, Folorunso O

2018-06-13

We conducted benefit-cost analysis of outbreak and surveillance costs for HPAI H5N1in poultry in Nigeria. Poultry's death directly cost US$ 939,734.0 due to outbreaks. The integrated disease surveillance and response originally created for comprehensive surveillance and laboratory investigation of human diseases was adapted for HPAI H5N1 in poultry. Input data were obtained from the field, government documents and repositories and peer-reviewed publications. Actual/forecasted bird numbers lost were integrated into a financial model and estimates of losses were calculated. Costs of surveillance as alternative intervention were determined based on previous outbreak control costs and outputs were generated in SurvCost® with sensitivity analyses for different scenarios. Uncontrolled outbreaks will lead to loss of over US$ 2.2 billion annually in Nigeria with 47.8% of the losses coming from eggs. The annual cost of all animal related health activities was

Life Prediction of Spent Fuel Storage Canister Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballinger, Ronald

The original purpose of this project was to develop a probabilistic model for SCC-induced failure of spent fuel storage canisters, exposed to a salt-air environment in the temperature range 30-70°C for periods up to and exceeding 100 years. The nature of this degradation process, which involves multiple degradation mechanisms, combined with variable and uncertain environmental conditions dictates a probabilistic approach to life prediction. A final report for the original portion of the project was submitted earlier. However, residual stress measurements for as-welded and repair welds could not be performed within the original time of the project. As a result ofmore » this, a no-cost extension was granted in order to complete these tests. In this report, we report on the results of residual stress measurements.« less

45 CFR 74.51 - Monitoring and reporting program performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... quantitative data should be related to cost data for computation of unit costs. (2) Reasons why established..., analysis and explanation of cost overruns or high unit costs. (e) Recipients shall submit the original and..., “Controlling Paperwork Burdens on the Public,” when requesting performance data from recipients. ...

The Sensitivity of Adverse Event Cost Estimates to Diagnostic Coding Error

PubMed Central

Wardle, Gavin; Wodchis, Walter P; Laporte, Audrey; Anderson, Geoffrey M; Baker, Ross G

2012-01-01

Objective To examine the impact of diagnostic coding error on estimates of hospital costs attributable to adverse events. Data Sources Original and reabstracted medical records of 9,670 complex medical and surgical admissions at 11 hospital corporations in Ontario from 2002 to 2004. Patient specific costs, not including physician payments, were retrieved from the Ontario Case Costing Initiative database. Study Design Adverse events were identified among the original and reabstracted records using ICD10-CA (Canadian adaptation of ICD10) codes flagged as postadmission complications. Propensity score matching and multivariate regression analysis were used to estimate the cost of the adverse events and to determine the sensitivity of cost estimates to diagnostic coding error. Principal Findings Estimates of the cost of the adverse events ranged from $16,008 (metabolic derangement) to $30,176 (upper gastrointestinal bleeding). Coding errors caused the total cost attributable to the adverse events to be underestimated by 16 percent. The impact of coding error on adverse event cost estimates was highly variable at the organizational level. Conclusions Estimates of adverse event costs are highly sensitive to coding error. Adverse event costs may be significantly underestimated if the likelihood of error is ignored. PMID:22091908

Development of a Commercial Prototype of the Autonomous Pathogen Detection System Final Report CRADA No. TC-02077-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dzenitis, J. M.; Haigh, P.

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL), and GE Ion Track, Inc. (GEIT) to develop a commercial prototype of the Autonomous Pathogen Detection System (APDS), an instrument that monitors the air for all three biological threat agents (bacteria, viruses and toxins). This was originally a one year CRADA project, with the cost of the work at LLNL being funded by the Department of Homeland Security's Office of National Laboratories. The original project consisted of five major tasks and deliverables. The CRADA was then amended, converting the CRADA from amore » programmatically funded CRADA to a funds-in CRADA, extending the project for an additional 14 months, and adding four new tasks and deliverable to the project.« less

The complex legal and ethical issues related to generic medications. Viral hepatitis: a case study.

PubMed

Danta, M; Ghinea, N

2017-04-01

The economic impact of medications is significant, with many countries unable to afford the essential medicines listed by the WHO. Generic medications are one strategy to address this issue. Generic medications are similar to but not the same as originator medications. They have a significant cost advantage because they do not require the background research and development studies to support registration. Consequently, they are gaining increased market share in both the developed and developing world. Many new medications are now licensed to generic manufacturers in the developing world. As a result, it is possible for patients to bypass regulatory and cost barriers by importing medications directly from generic producers. Importation of the novel hepatitis C direct-acting antiviral therapy into Australia before it was registered in the country is an illustrative case study. This review will characterise generic medications and some of the legal and ethical issues around their utilisation, focusing on the relevant players, including pharma, government, patients and doctors.

NASA Project Constellation Systems Engineering Approach

NASA Technical Reports Server (NTRS)

Dumbacher, Daniel L.

2005-01-01

NASA's Office of Exploration Systems (OExS) is organized to empower the Vision for Space Exploration with transportation systems that result in achievable, affordable, and sustainable human and robotic journeys to the Moon, Mars, and beyond. In the process of delivering these capabilities, the systems engineering function is key to implementing policies, managing mission requirements, and ensuring technical integration and verification of hardware and support systems in a timely, cost-effective manner. The OExS Development Programs Division includes three main areas: (1) human and robotic technology, (2) Project Prometheus for nuclear propulsion development, and (3) Constellation Systems for space transportation systems development, including a Crew Exploration Vehicle (CEV). Constellation Systems include Earth-to-orbit, in-space, and surface transportation systems; maintenance and science instrumentation; and robotic investigators and assistants. In parallel with development of the CEV, robotic explorers will serve as trailblazers to reduce the risk and costs of future human operations on the Moon, as well as missions to other destinations, including Mars. Additional information is included in the original extended abstract.

Fiber in access technologies and network convergence: an opportunity for optical integration

NASA Astrophysics Data System (ADS)

Ghiggino, Pierpaolo C.

2008-11-01

Broadband networks are among the fastest growing segment in telecom. The initial and still very significant push originated with xDSL technologies and indeed a significant amount of research and development is still occurring in this field with impressive results and allowing for a remarkable use of the installed copper infrastructure way beyond its originally planned bandwidth capabilities. However it is clear that ultimately a more suitable fiber based infrastructure will be needed in order to reduce both operational and network technology costs. Such cost reduction in inevitable as the added value to end users is only related to services and these cannot be priced outside a sensible window, whilst the related bandwidth increase is much more dramatic and its huge variability must be met with little or no cost impact by the network and its operation. Fiber in access has indeed the potential to cope with a huge bandwidth demand for many years to come as its inherent bandwidth capabilities are only just tapped by current service requirements. However the whole technology supply chain must follow in line. In particular optical technology must brace itself to cope with the required much larger deployment and greater cost effectiveness, whilst at the same time deliver performance suitable to the bandwidth increase offered in the longer term by the fiber medium. This paper looks at this issues and debates the opportunities for a new class of optical devices making use of the progress in optical integration

How can sludge dewatering devices be assessed? Development of a new DSS and its application to real case studies.

PubMed

Bertanza, Giorgio; Papa, Matteo; Canato, Matteo; Collivignarelli, Maria Cristina; Pedrazzani, Roberta

2014-05-01

A key issue in biological Waste Water Treatment Plants (WWTPs) operation is represented by the sludge management. Mechanical dewatering is a crucial stage for sludge volume reduction; though, being a costly operation, its optimization is required. We developed an original experimental methodology to evaluate the technical (dewatering efficiency) and financial (total treatment costs) performance of dewatering devices, which might be used as a DSS (Decision Support System) for WWTP managers. This tool was then applied to two real case studies for comparing, respectively, three industrial size centrifuges, and two different operation modes of the same machine (fixed installation vs. outsourcing service). In both the cases, the best option was identified, based jointly on economic and (site-specific) technical evaluations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Platinum Group Metal Recycling Technology Development - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence Shore

BASF Catalysts LLC, formerly Engelhard Corporation, has completed a project to recover Pt from PEM fuel cell membrane electrode assemblies. The project, which began in 2003, has met the project objective of an environmentally-friendly, cost-effective method for recovery of platinum without release of hydrogen fluoride. This has been achieved using a combination of milling, dispersion and acid leaching. 99% recovery of Pt was achieved, and this high yield can be scaled up using one vessel for a single leach and rinse. Leaching was been successfully achieved using a 10% solids level, double the original target. At this solids content, themore » reagent and utility costs represent ~0.35% of the Pt value of a lot, using very conservative assumptions. The main cost of the process is capital depreciation, followed by labor.« less

Selective heteroepitaxy on deeply grooved substrate: A route to low cost semipolar GaN platforms of bulk quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tendille, Florian, E-mail: florian.tendille@crhea.cnrs.fr; Vennéguès, Philippe; De Mierry, Philippe

2016-08-22

Semipolar GaN crystal stripes larger than 100 μm with dislocation densities below 5 × 10{sup 6} cm{sup −2} are achieved using a low cost fabrication process. An original sapphire patterning procedure is proposed, enabling selective growth of semipolar oriented GaN stripes while confining the defects to specific areas. Radiative and non-radiative crystalline defects are investigated by cathodoluminescence and can be correlated to the development of crystal microstructure during the growth process. A dislocation reduction mechanism, supported by transmission electron microscopy, is proposed. This method represents a step forward toward low-cost quasi-bulk semipolar GaN epitaxial platforms with an excellent structural quality which will allowmore » for even more efficient III-nitride based devices.« less

SOFIA: A Stratospheric Observatory for Infrared Astronomy

NASA Technical Reports Server (NTRS)

Erickson, E. F.; Davidson, J. A.; Thorley, G.; Caroff, L. J.

1991-01-01

SOFIA is described as it was originally (May 1988) for the Space and Earth Sciences Advisory Committee (SESAC). The format and questions were provided by SESAC as a standard for judging the merit of potential U.S. space science projects. This version deletes Section IIF, which addressed development costs of the SOFIA facility. SOFIA's unique astronomical potential is described and it is shown how it complements and supports existing and planned facilities.

Linking Tribofilm Nanomechanics to the Origin of Low Friction and Wear

DTIC Science & Technology

2013-08-08

34Improving Wind Turbine Gearbox Reliability," National Renewable Energy Laboratory, Boulder, CO USA. [3] De Groh, K. K., Banks, B. A., McCarthy, C. E...the development of advanced lubrication strategies for improved friction and wear management. For example, increased size and power output of wind ... turbines reduce specific costs, but also contribute to stresses and temperatures that exceed the capabilities of existing gearbox lubrication

Command, Control, and the Common Defense

DTIC Science & Technology

1996-10-01

as in two books, Our Air Force: The Keystone of National Defense and Winged Defense: The Development and Possibilities of Modern Air Power, Economic...Command first took the field against the Germans during the North African campaign in 1943, control of tactical air operations was fragmented at both...remained intensely loyal to their original strategic ideas. 42 The tactical success of which Brodie wrote was gained at some cost in the North African

Fixed-Price Development Contracts: A Historical Perspective

DTIC Science & Technology

2012-09-01

its rival, Boeing, in 1997 ( Boyne , 2002). 36   F-117 Nighthawk In the 1970s, the Air Force expressed a desire to integrate stealth...original cost-reimbursement contract was later changed to a fixed-price incentive contract by Secretary of the Navy John Lehman in response to...inquiry [Memorandum for the Secretary of the Navy]. Washington, DC: Department of the Navy. Boyne , W. (2002). Air warfare: An international

Cost of production of live attenuated dengue vaccines: a case study of the Instituto Butantan, Sao Paulo, Brazil.

PubMed

Mahoney, R T; Francis, D P; Frazatti-Gallina, N M; Precioso, A R; Raw, I; Watler, P; Whitehead, P; Whitehead, S S

2012-07-06

A vaccine to prevent dengue disease is urgently needed. Fortunately, a few tetravalent candidate vaccines are in the later stages of development and show promise. But, if the cost of these candidates is too high, their beneficial potential will not be realized. The price of a vaccine is one of the most important factors affecting its ultimate application in developing countries. In recent years, new vaccines such as those for human papilloma virus and pneumococcal disease (conjugate vaccine) have been introduced with prices in developed countries exceeding $50 per dose. These prices are above the level affordable by developing countries. In contrast, other vaccines such as those against Japanese encephalitis (SA14-14-2 strain vaccine) and meningitis type A have prices in developing countries below one dollar per dose, and it is expected that their introduction and use will proceed more rapidly. Because dengue disease is caused by four related viruses, vaccines must be able to protect against all four. Although there are several live attenuated dengue vaccine candidates under clinical evaluation, there remains uncertainty about the cost of production of these tetravalent vaccines, and this uncertainty is an impediment to rapid progress in planning for the introduction and distribution of dengue vaccines once they are licensed. We have undertaken a detailed economic analysis, using standard industrial methodologies and applying generally accepted accounting practices, of the cost of production of a live attenuated vaccine, originally developed at the US National Institutes of Health (National Institute of Allergy and Infectious Diseases), to be produced at the Instituto Butantan in Sao Paulo, Brazil. We determined direct costs of materials, direct costs of personnel and labor, indirect costs, and depreciation. These were analyzed assuming a steady-state production of 60 million doses per year. Although this study does not seek to compute the price of the final licensed vaccine, the cost of production estimate produced here leads to the conclusion that the vaccine can be made available at a price that most ministries of health in developing countries could afford. This conclusion provides strong encouragement for supporting the development of the vaccine so that, if it proves to be safe and effective, licensure can be achieved soon and the burden of dengue disease can be reduced. Copyright © 2012 Elsevier Ltd. All rights reserved.

77 FR 17360 - Reform of Federal Policies Relating to Grants and Cooperative Agreements; Cost Principles And...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

... II Reform of Federal Policies Relating to Grants and Cooperative Agreements; Cost Principles And...; cost principles and administrative requirements (including Single Audit Act). The original comment...-idx?c=ecfr&tpl=/ecfrbrowse/Title02/2cfrv1_02.tpl . The Cost Principles for Hospitals are in the...

The Art of Projecting: The Cost of Keeping Periodicals.

ERIC Educational Resources Information Center

Ketcham, Lee; Born, Kathleen

1993-01-01

Provides periodical prices for 1993 and projects 1994 costs. Trends and projections, cost by country of origin, the role of foreign publications, currency fluctuations, and the basis for forecasting are discussed. Cost histories are given by subject area and country of publication. Prices of interest to smaller and public libraries are also given.…

Sojourner Rover Tracks in Compressible Soil

NASA Technical Reports Server (NTRS)

1997-01-01

Sojourner's observations in the Ares region on Mars raise and answer questions about the origins of the rocks and other deposits found there. Deposits are not the same everywhere. In compressible soil, a rover wheel produced ruts with steep walls, marginal slumps, and nearly perfect reflective casts of the spacing between the cleats.

NOTE: original caption as published in Science Magazine

Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology (Caltech).

Modeling the performance and cost of lithium-ion batteries for electric-drive vehicles.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, P. A.

2011-10-20

This report details the Battery Performance and Cost model (BatPaC) developed at Argonne National Laboratory for lithium-ion battery packs used in automotive transportation. The model designs the battery for a specified power, energy, and type of vehicle battery. The cost of the designed battery is then calculated by accounting for every step in the lithium-ion battery manufacturing process. The assumed annual production level directly affects each process step. The total cost to the original equipment manufacturer calculated by the model includes the materials, manufacturing, and warranty costs for a battery produced in the year 2020 (in 2010 US$). At themore » time this report is written, this calculation is the only publically available model that performs a bottom-up lithium-ion battery design and cost calculation. Both the model and the report have been publically peer-reviewed by battery experts assembled by the U.S. Environmental Protection Agency. This report and accompanying model include changes made in response to the comments received during the peer-review. The purpose of the report is to document the equations and assumptions from which the model has been created. A user of the model will be able to recreate the calculations and perhaps more importantly, understand the driving forces for the results. Instructions for use and an illustration of model results are also presented. Almost every variable in the calculation may be changed by the user to represent a system different from the default values pre-entered into the program. The distinct advantage of using a bottom-up cost and design model is that the entire power-to-energy space may be traversed to examine the correlation between performance and cost. The BatPaC model accounts for the physical limitations of the electrochemical processes within the battery. Thus, unrealistic designs are penalized in energy density and cost, unlike cost models based on linear extrapolations. Additionally, the consequences on cost and energy density from changes in cell capacity, parallel cell groups, and manufacturing capabilities are easily assessed with the model. New proposed materials may also be examined to translate bench-scale values to the design of full-scale battery packs providing realistic energy densities and prices to the original equipment manufacturer. The model will be openly distributed to the public in the year 2011. Currently, the calculations are based in a Microsoft{reg_sign} Office Excel spreadsheet. Instructions are provided for use; however, the format is admittedly not user-friendly. A parallel development effort has created an alternate version based on a graphical user-interface that will be more intuitive to some users. The version that is more user-friendly should allow for wider adoption of the model.« less

Assessment of the overall effect of migration: the Hexi corridor irrigation and migrant settlement project.

PubMed

Zhang, M; Zhang, Z

1996-01-01

This article presents an assessment of an agricultural development program in the Shule River Valley, Gansu Province, China. Migrants were settled in the Shule River Valley as part of an agricultural economic development plan to alleviate poverty and reduce population pressure at the place of origin. The settlement plan included water conservation, settlement of migrants, infrastructure development, environmental protection, support for township enterprises, transportation, education, and medical services. The project costs amounted to about 13,000 yuan per person. It was expected that migrant income would average about 1000 yuan per person over 10 years, and government relief would be reduced by about 142 yuan per person. The annual rate of return of the total investment was estimated to be 9% in 11.5 years. The individual investment for housing construction, farm tools and equipment, installation of water and power, and moving costs would amount to among 4750 yuan per household, or about 1000 yuan per person. The government allowance of 1100 yuan per person would cover these costs. It was expected that migrants' per capita net income would be 300 yuan within three years of the move. Findings from other migrant programs reveal an increase in food productivity and migrant income. Over 5 years, the grain shipped by the government to the central part of the province decreased from 285,000 tons to 145,000 tons during 1982-87. The increased grain production and the reduced demand for government supplies of grain will ease the short supply of grain in Gansu Province. The 200,000 migrants reduced grain demand by 50% and left 26,667 hectares of arable land that resulted in higher per capita land supply at the place of origin. Migrants' lives will be improved in numerous ways, such as reduced intermarriage with close relatives. The new development area is based on sound environmental planning.

Design and development of a meal system for the elderly. [public health - nutrition/diet

NASA Technical Reports Server (NTRS)

1975-01-01

Food preference surveys (taste tests) were performed for 95 food items (which were selected from an original list of 150 items), and 21 menus were developed from the survey results. Each menu contains an entree, two side dishes, dessert, and a beverage. Food manufacturing specifications for freeze dried foods, frozen foods, and beverages are examined, and product labeling and packaging requirements are discussed. The nutritional value of the various foods is listed in tabular form, and sample product labels are shown. Cost estimates per serving are also included.

Development of low cost contacts to silicon solar cells

NASA Technical Reports Server (NTRS)

Tanner, D. P.; Iles, P. A.

1980-01-01

A copper based contact system using plated Pd-Cr-Cu was developed. Good cells were made but cells degraded under low temperature (300 C) heat treatments. The degradation was identified as copper migration into the cells junction region. A paper study was conducted to find a proper barrier to the copper migration problem. Nickel was identified as the best candidate barrier and this was verified in a heat treatment study using evaporated metal layers. An electroless nickel solution was substituted for the electroless chromium solution in the original process.

Patent and product piracy

NASA Astrophysics Data System (ADS)

Ignat, V.

2016-08-01

Advanced industrial countries are affected by technology theft. German industry annually loses more than 50 billion euros. The main causes are industrial espionage and fraudulent copying patents and industrial products. Many Asian countries are profiteering saving up to 65% of production costs. Most affected are small medium enterprises, who do not have sufficient economic power to assert themselves against some powerful countries. International organizations, such as Interpol and World Customs Organization - WCO - work together to combat international economic crime. Several methods of protection can be achieved by registering patents or specific technical methods for recognition of product originality. They have developed more suitable protection, like Hologram, magnetic stripe, barcode, CE marking, digital watermarks, DNA or Nano-technologies, security labels, radio frequency identification, micro color codes, matrix code, cryptographic encodings. The automotive industry has developed the method “Manufactures against Product Piracy”. A sticker on the package features original products and it uses a Data Matrix verifiable barcode. The code can be recorded with a smartphone camera. The smartphone is connected via Internet to a database, where the identification numbers of the original parts are stored.

Analysis of electric vehicle's trip cost without late arrival

NASA Astrophysics Data System (ADS)

Leng, Jun-Qiang; Zhao, Lin

2017-03-01

In this paper, we use a car-following model to study each electric vehicle's trip cost and the corresponding total trip cost without late arrival. The numerical result show that the electricity cost has significant effects on each electric vehicle's trip cost and the corresponding total trip costs and that the effects are dependent on its time headway at the origin, but the electricity cost has no prominent effects on the minimum value of the system's total trip cost.

Analysis of the temporal program of replication initiation in yeast chromosomes.

PubMed

Friedman, K L; Raghuraman, M K; Fangman, W L; Brewer, B J

1995-01-01

The multiple origins of eukaryotic chromosomes vary in the time of their initiation during S phase. In the chromosomes of Saccharomyces cerevisiae the presence of a functional telomere causes nearby origins to delay initiation until the second half of S phase. The key feature of telomeres that causes the replication delay is the telomeric sequence (C(1-3)A/G(1-3)T) itself and not the proximity of the origin to a DNA end. A second group of late replicating origins has been found at an internal position on chromosome XIV. Four origins, spanning approximately 140 kb, initiate replication in the second half of S phase. At least two of these internal origins maintain their late replication time on circular plasmids. Each of these origins can be separated into two functional elements: those sequences that provide origin function and those that impose late activation. Because the assay for determining replication time is costly and laborious, it has not been possible to analyze in detail these 'late' elements. We report here the development of two new assays for determining replication time. The first exploits the expression of the Escherichia coli dam methylase in yeast and the characteristic period of hemimethylation that transiently follows the passage of a replication fork. The second uses quantitative hybridization to detect two-fold differences in the amount of specific restriction fragments as a function of progress through S phase. The novel aspect of this assay is the creation in vivo of a non-replicating DNA sequence by site-specific pop-out recombination. This non-replicating fragment acts as an internal control for copy number within and between samples. Both of these techniques are rapid and much less costly than the more conventional density transfer experiments that require CsCl gradients to detect replicated DNA. With these techniques it should be possible to identify the sequences responsible for late initiation, to search for other late replicating regions in the genome, and to begin to analyze the effect that altering the temporal program has on chromosome function.

Diagnostic accuracy of chest X-rays acquired using a digital camera for low-cost teleradiology.

PubMed

Szot, Agnieszka; Jacobson, Francine L; Munn, Samson; Jazayeri, Darius; Nardell, Edward; Harrison, David; Drosten, Ralph; Ohno-Machado, Lucila; Smeaton, Laura M; Fraser, Hamish S F

2004-02-01

Store-and-forward telemedicine, using e-mail to send clinical data and digital images, offers a low-cost alternative for physicians in developing countries to obtain second opinions from specialists. To explore the potential usefulness of this technique, 91 chest X-ray images were photographed using a digital camera and a view box. Four independent readers (three radiologists and one pulmonologist) read two types of digital (JPEG and JPEG2000) and original film images and indicated their confidence in the presence of eight features known to be radiological indicators of tuberculosis (TB). The results were compared to a "gold standard" established by two different radiologists, and assessed using receiver operating characteristic (ROC) curve analysis. There was no statistical difference in the overall performance between the readings from the original films and both types of digital images. The size of JPEG2000 images was approximately 120KB, making this technique feasible for slow internet connections. Our preliminary results show the potential usefulness of this technique particularly for tuberculosis and lung disease, but further studies are required to refine its potential.

Advanced in-duct sorbent injection for SO{sub 2} control. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stouffer, M.R.; Withium, J.A.; Rosenhoover, W.A.

1994-12-01

The objective of this research project was to develop a second generation duct sorbent injection technology as a cost-effective compliance option for the 1990 Clean Air Act Amendments. Research and development work was focused on the Advanced Coolside process, which showed the potential for exceeding the original performance targets of 90% SO{sub 2} removal and 60% sorbent utilization. Process development was conducted in a 1000 acfm pilot plant. The pilot plant testing showed that the Advanced Coolside process can achieve 90% SO{sub 2} removal at sorbent utilizations up to 75%. The testing also showed that the process has the potentialmore » to achieve very high removal efficiency (90 to >99%). By conducting conceptual process design and economic evaluations periodically during the project, development work was focused on process design improvements which substantially lowered process capital and operating costs, A final process economic study projects capital costs less than one half of those for limestone forced oxidation wet FGD. Projected total SO{sub 2} control cost is about 25% lower than wet FGD for a 260 MWe plant burning a 2.5% sulfur coal. A waste management study showed the acceptability of landfill disposal; it also identified a potential avenue for by-product utilization which should be further investigated. Based on the pilot plant performance and on the above economic projections, future work to scale up the Advanced Coolside process is recommended.« less

A New, Scalable and Low Cost Multi-Channel Monitoring System for Polymer Electrolyte Fuel Cells.

PubMed

Calderón, Antonio José; González, Isaías; Calderón, Manuel; Segura, Francisca; Andújar, José Manuel

2016-03-09

In this work a new, scalable and low cost multi-channel monitoring system for Polymer Electrolyte Fuel Cells (PEFCs) has been designed, constructed and experimentally validated. This developed monitoring system performs non-intrusive voltage measurement of each individual cell of a PEFC stack and it is scalable, in the sense that it is capable to carry out measurements in stacks from 1 to 120 cells (from watts to kilowatts). The developed system comprises two main subsystems: hardware devoted to data acquisition (DAQ) and software devoted to real-time monitoring. The DAQ subsystem is based on the low-cost open-source platform Arduino and the real-time monitoring subsystem has been developed using the high-level graphical language NI LabVIEW. Such integration can be considered a novelty in scientific literature for PEFC monitoring systems. An original amplifying and multiplexing board has been designed to increase the Arduino input port availability. Data storage and real-time monitoring have been performed with an easy-to-use interface. Graphical and numerical visualization allows a continuous tracking of cell voltage. Scalability, flexibility, easy-to-use, versatility and low cost are the main features of the proposed approach. The system is described and experimental results are presented. These results demonstrate its suitability to monitor the voltage in a PEFC at cell level.

Design and Demonstration of an Advanced Agricultural Feedstock Supply System for Lignocellulosic Bioenergy Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, Timothy C.; Comer, Kevin S.; Belden, Jr., William S.

2016-04-30

This three-year project developed and demonstrated four innovative, first-of-their-kind pieces of equipment that are aimed at significantly reducing the cost of delivered herbaceous biomass. This equipment included a Self-Propelled Baler (SPB), a Bale Picking Truck (BPT), a Self-Loading Trailer (SLT), and a Heavy Crop Header for harvesting high yielding energy crops. This equipment was designed and fabricated during the first two years of the project and demonstrated on available crops (corn stover, wheat straw, and warm season grasses) across the nation, as available. Operational performance and cost data was collected and analyzed throughout the project to measure the costs ofmore » baseline harvesting (using conventional harvesting equipment) and advanced harvesting with the newly developed equipment. This data revealed that the project met its original goal of developing equipment that is realistically capable of reducing the cost of delivered biomass by $13 per dry ton. Each machine was tested after fabrication and put to the test in one or more commercial harvesting seasons. During these tests, operational flaws were found and fixed through upgrades and improvements. The first new SPB, BPT, and two new SLTs were ready for use during the 2013 harvest season. Since then, over 40 SLTs have been ordered and are currently under fabrication. All of the equipment will be commercially available to the industry as demand increases.« less

A New, Scalable and Low Cost Multi-Channel Monitoring System for Polymer Electrolyte Fuel Cells

PubMed Central

Calderón, Antonio José; González, Isaías; Calderón, Manuel; Segura, Francisca; Andújar, José Manuel

2016-01-01

In this work a new, scalable and low cost multi-channel monitoring system for Polymer Electrolyte Fuel Cells (PEFCs) has been designed, constructed and experimentally validated. This developed monitoring system performs non-intrusive voltage measurement of each individual cell of a PEFC stack and it is scalable, in the sense that it is capable to carry out measurements in stacks from 1 to 120 cells (from watts to kilowatts). The developed system comprises two main subsystems: hardware devoted to data acquisition (DAQ) and software devoted to real-time monitoring. The DAQ subsystem is based on the low-cost open-source platform Arduino and the real-time monitoring subsystem has been developed using the high-level graphical language NI LabVIEW. Such integration can be considered a novelty in scientific literature for PEFC monitoring systems. An original amplifying and multiplexing board has been designed to increase the Arduino input port availability. Data storage and real-time monitoring have been performed with an easy-to-use interface. Graphical and numerical visualization allows a continuous tracking of cell voltage. Scalability, flexibility, easy-to-use, versatility and low cost are the main features of the proposed approach. The system is described and experimental results are presented. These results demonstrate its suitability to monitor the voltage in a PEFC at cell level. PMID:27005630

A scoping review on health economics in neurosurgery for acute spine trauma.

PubMed

Chan, Brian C F; Craven, B Catharine; Furlan, Julio C

2018-05-01

OBJECTIVE Acute spine trauma (AST) has a relatively low incidence, but it often results in substantial individual impairments and societal economic burden resulting from the associated disability. Given the key role of neurosurgeons in the decision-making regarding operative management of individuals with AST, the authors performed a systematic search with scoping synthesis of relevant literature to review current knowledge regarding the economic burden of AST. METHODS This systematic review with scoping synthesis included original articles reporting cost-effectiveness, cost-utility, cost-benefit, cost-minimization, cost-comparison, and economic analyses related to surgical management of AST, whereby AST is defined as trauma to the spine that may result in spinal cord injury with motor, sensory, and/or autonomic impairment. The initial literature search was carried out using MEDLINE, EMBASE, CINAHL, CCTR, and PubMed. All original articles captured in the literature search and published from 1946 to September 27, 2017, were included. Search terms used were the following: (cost analysis, cost effectiveness, cost benefit, economic evaluation or economic impact) AND (spine or spinal cord) AND (surgery or surgical). RESULTS The literature search captured 5770 titles, of which 11 original studies met the inclusion/exclusion criteria. These 11 studies included 4 cost-utility analyses, 5 cost analyses that compared the cost of intervention with a comparator, and 2 studies examining direct costs without a comparator. There are a few potentially cost-saving strategies in the neurosurgical management of individuals with AST, including 1) early surgical spinal cord decompression for acute traumatic cervical spinal cord injury (or traumatic thoracolumbar fractures, traumatic cervical fractures); 2) surgical treatment of the elderly with type-II odontoid fractures, which is more costly but more effective than the nonoperative approach among individuals with age at AST between 65 and 84 years; 3) surgical treatment of traumatic thoracolumbar spine fractures, which is implicated in greater direct costs but lower general-practitioner visit costs, private expenditures, and absenteeism costs than nonsurgical management; and 4) removal of pedicle screws 1-2 years after posterior instrumented fusion for individuals with thoracolumbar burst fractures, which is more cost-effective than retaining the pedicle screws. CONCLUSIONS This scoping synthesis underscores a number of potentially cost-saving opportunities for neurosurgeons when managing patients with AST. There are significant knowledge gaps regarding the potential economic impact of therapeutic choices for AST that are commonly used by neurosurgeons.

Multirate sampled-data yaw-damper and modal suppression system design

NASA Technical Reports Server (NTRS)

Berg, Martin C.; Mason, Gregory S.

1990-01-01

A multirate control law synthesized algorithm based on an infinite-time quadratic cost function, was developed along with a method for analyzing the robustness of multirate systems. A generalized multirate sampled-data control law structure (GMCLS) was introduced. A new infinite-time-based parameter optimization multirate sampled-data control law synthesis method and solution algorithm were developed. A singular-value-based method for determining gain and phase margins for multirate systems was also developed. The finite-time-based parameter optimization multirate sampled-data control law synthesis algorithm originally intended to be applied to the aircraft problem was instead demonstrated by application to a simpler problem involving the control of the tip position of a two-link robot arm. The GMCLS, the infinite-time-based parameter optimization multirate control law synthesis method and solution algorithm, and the singular-value based method for determining gain and phase margins were all demonstrated by application to the aircraft control problem originally proposed for this project.

Sensory exploitation and sexual conflict

PubMed Central

Arnqvist, Göran

2006-01-01

Much of the literature on male–female coevolution concerns the processes by which male traits and female preferences for these can coevolve and be maintained by selection. There has been less explicit focus on the origin of male traits and female preferences. Here, I argue that it is important to distinguish origin from subsequent coevolution and that insights into the origin can help us appreciate the relative roles of various coevolutionary processes for the evolution of diversity in sexual dimorphism. I delineate four distinct scenarios for the origin of male traits and female preferences that build on past contributions, two of which are based on pre-existing variation in quality indicators among males and two on exploitation of pre-existing sensory biases among females. Recent empirical research, and theoretical models, suggest that origin by sensory exploitation has been widespread. I argue that this points to a key, but perhaps transient, role for sexually antagonistic coevolution (SAC) in the subsequent evolutionary elaboration of sexual traits, because (i) sensory exploitation is often likely to be initially costly for individuals of the exploited sex and (ii) the subsequent evolution of resistance to sensory exploitation should often be associated with costs due to selective constraints. A review of a few case studies is used to illustrate these points. Empirical data directly relevant to the costs of being sensory exploited and the costs of evolving resistance is largely lacking, and I stress that such data would help determining the general importance of sexual conflict and SAC for the evolution of sexual dimorphism. PMID:16612895

Portable Welder

NASA Technical Reports Server (NTRS)

1984-01-01

A low cost, low power, self-contained portable welding gun designed for joining thermoplastics which become soft when heated and harden when cooled was developed originally by NASA's Langley Research Center for repairing helicopter windshields. Welder has a broad range of applications for joining both thermoplastic materials in the aerospace, automotive, appliance, and construction industries. Welders portability and low power requirement allow its use on-site in any type of climate, with power supplied by a variety of portable sources.

A New ’Availability-Payment’ Model for Pricing Performance-Based Logistics Contracts

DTIC Science & Technology

2014-04-30

maintenance network connected to the inventory and Original Equipment Manufacturer (OEM) used in this paper. The input to the Petri net in Figure 2 is the...contract structures. The model developed in this paper uses an affine controller to drive a discrete event simulator ( Petri net ) that produces...discrete event simulator ( Petri net ) that produces availability and cost measures. The model is used to explore the optimum availability assessment

47 CFR 32.2231 - Radio systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... costs. This account shall also include the original cost of earth stations and spare parts, material or..., amplification, propagation, reception, modulation, and demodulation of radio waves in free space over which...

Efficacy and safety of a conversion from the original tacrolimus and mycophenolate mofetil to the generics Tacpan® and Mowel® after liver transplantation

PubMed Central

Vollmar, Johanna; Bellmann, Maren Christina; Darstein, Felix; Hoppe-Lotichius, Maria; Mittler, Jens; Heise, Michael; Rüttger, Bernd; Weyer, Veronika; Zimmermann, Anca; Lang, Hauke; Galle, Peter R; Zimmermann, Tim

2015-01-01

Background Expensive pharmaceuticals are a major reason for cost intensive health care systems. Long-term immunosuppressive therapy plays a relevant role after organ transplantation. Patents of original drugs have expired and cheaper products are available. Little data are available regarding efficacy and safety of generic immunosuppressive agents. Methods In this prospective study, 25 patients, who were clinically stable for a minimum of 2 years after liver transplantation, were converted from the original formulations of tacrolimus (TAC) and mycophenolate mofetil to the generics Tacpan® (TAP) and Mowel® (MOW). Patients were followed-up for 6 months. Results were compared retrospectively to 25 age- and sex-matched controls treated with the original brands. Results In the matched-pair analysis of TAC trough level/dose ratio, no significant difference was found between TAP/MOW and TAC/mycophenolate mofetil groups. No acute rejection occurred in either group. In total, 17 patients reported mild side effects in the TAP/MOW group. The most common side effects were gastrointestinal symptoms. Intra-individual analysis of costs revealed a considerable cost reduction in the TAP/MOW group (in median 25.03%; P<0.001). Conclusion In summary, the use of the generics TAP/MOW is effective and seems to be safe and cost-efficient in stable liver-transplantation patients. PMID:26604701

Development and Validation of a Fast, Accurate and Cost-Effective Aeroservoelastic Method on Advanced Parallel Computing Systems

NASA Technical Reports Server (NTRS)

Goodwin, Sabine A.; Raj, P.

1999-01-01

Progress to date towards the development and validation of a fast, accurate and cost-effective aeroelastic method for advanced parallel computing platforms such as the IBM SP2 and the SGI Origin 2000 is presented in this paper. The ENSAERO code, developed at the NASA-Ames Research Center has been selected for this effort. The code allows for the computation of aeroelastic responses by simultaneously integrating the Euler or Navier-Stokes equations and the modal structural equations of motion. To assess the computational performance and accuracy of the ENSAERO code, this paper reports the results of the Navier-Stokes simulations of the transonic flow over a flexible aeroelastic wing body configuration. In addition, a forced harmonic oscillation analysis in the frequency domain and an analysis in the time domain are done on a wing undergoing a rigid pitch and plunge motion. Finally, to demonstrate the ENSAERO flutter-analysis capability, aeroelastic Euler and Navier-Stokes computations on an L-1011 wind tunnel model including pylon, nacelle and empennage are underway. All computational solutions are compared with experimental data to assess the level of accuracy of ENSAERO. As the computations described above are performed, a meticulous log of computational performance in terms of wall clock time, execution speed, memory and disk storage is kept. Code scalability is also demonstrated by studying the impact of varying the number of processors on computational performance on the IBM SP2 and the Origin 2000 systems.

Regulatory and clinical considerations for biosimilar oncology drugs

PubMed Central

Bennett, Charles L; Chen, Brian; Hermanson, Terhi; Wyatt, Michael D; Schulz, Richard M; Georgantopoulos, Peter; Kessler, Samuel; Raisch, Dennis W; Qureshi, Zaina P; Lu, Z Kevin; Love, Bryan L; Noxon, Virginia; Bobolts, Laura; Armitage, Melissa; Bian, John; Ray, Paul; Ablin, Richard J; Hrushesky, William J; Macdougall, Iain C; Sartor, Oliver; Armitage, James O

2015-01-01

Biological oncology products are integral to cancer treatment, but their high costs pose challenges to patients, families, providers, and insurers. The introduction of biosimilar agents—molecules that are similar in structure, function, activity, immunogenicity, and safety to the original biological drugs—provide opportunities both to improve healthcare access and outcomes, and to reduce costs. Several international regulatory pathways have been developed to expedite entry of biosimilars into global marketplaces. The first wave of oncology biosimilar use was in Europe and India in 2007. Oncology biosimilars are now widely marketed in several countries in Europe, and in Australia, Japan, China, Russia, India, and South Korea. Their use is emerging worldwide, with the notable exception of the USA, where several regulatory and cost barriers to biosimilar approval exist. In this Review, we discuss oncology biosimilars and summarise their regulatory frameworks, clinical experiences, and safety concerns. PMID:25456378

Innovative on-chip packaging applied to uncooled IRFPA

NASA Astrophysics Data System (ADS)

Dumont, Geoffroy; Arnaud, Agnès; Impérinetti, Pierre; Vialle, Claire; Rabaud, Wilfried; Goudon, Valérie; Yon, Jean-Jacques

2008-04-01

The Laboratoire Infrarouge (LIR) of the Laboratoire d'Electronique et de Technologie de l'Information (LETI) has been involved in the development of microbolometers for over fifteen years. Two generations of technology have been transferred to ULIS and LETI is still working to improve performances of low cost detectors. Simultaneously, packaging still represents a significant part of detectors price. Reducing production costs would contribute to keep on extending applications of uncooled IRFPA to high volume markets like automotive. Therefore LETI is developing an on-chip packaging technology dedicated to microbolometers. This paper presents an original microcap structure that enables the use of IR window materials as sealing layers to maintain the expected vacuum level. The modelling and integration of an IR window suitable for this structure is also presented. This monolithic packaging technology is performed in a standard collective way, in continuation of bolometers' technology. The CEA-LETI, MINATEC presents status of these developments concerning this innovating technology including optical simulations results and SEM views of technical realizations.

Compact handheld low-cost biosensor platform for remote health monitoring

NASA Astrophysics Data System (ADS)

Hastanin, J.; Lenaerts, C.; Gailly, P.; Jans, H.; Huang, C.; Lagae, L.; Kokkinos, D.; Fleury-Frenette, K.

2016-04-01

In this paper, we present an original concept of plasmonic-related instrumentation platform dedicated to diagnostic biosensing tests out of the laboratory. The developed instrumental platform includes both disposable one-use microfluidic affinity biochip and compact optical readout device for biochip monitoring involving mobile Internet devices for data processing and communication. The biochip includes both microfluidic and optical coupling structures formed into a single plastic slab. The microfluidic path of the biochip operates in passive capillary pumping mode. In the proof-of-concept prototype, we address specifically the sensing format involving Surface Plasmon Resonance phenomenon. The biochip is plugged in the readout device without the use of an index matching fluid. An essential advantage of the developed biochip is that its implementation involves conventional hot embossing and thin film deposition process, perfectly suited for mass production of low-cost microfluidic biochip for biochemical applications.

Glass Artworks

NASA Technical Reports Server (NTRS)

1988-01-01

Several NASA technologies have played part in growth and cost containment of studio glass art, among them a foam type insulation developed to meet a need for lightweight material that would reduce flame spread in aircraft fire. Foam comes in several forms and is widely used by glass artists, chiefly as an insulator for the various types of ovens used in glass working. Another Spinoff is alumina crucibles to contain molten glass. Before alumina crucibles were used, glass tanks were made of firebrick which tended to erode under high temperatures and cause impurities; this not only improved quality but made the process more cost effective. One more NASA technology that found its way into glass art working is a material known as graphite board, a special form of graphite originally developed for rocket motor applications. This graphite is used to exact compound angles and creates molds for poured glass artworks of dramatic design.

Costs of tuberculosis disease in the European Union: a systematic analysis and cost calculation.

PubMed

Diel, Roland; Vandeputte, Joris; de Vries, Gerard; Stillo, Jonathan; Wanlin, Maryse; Nienhaus, Albert

2014-02-01

Without better vaccines it is unlikely that tuberculosis (TB) will ever be eliminated. An investment of ∼ €560 million is considered necessary to develop a new, effective vaccine in the European Union (EU). However, less is known about the costs of TB disease in the EU. We performed a systematic review of literature and institutional websites addressing the 27 EU members to summarise cost data. We searched MEDLINE, EMBASE and Cochrane bibliographies for relevant articles. Combining direct and indirect costs, we arrived at an average per-TB case costs in the original EU-15 states plus Cyprus, Malta and Slovenia of €10 282 for drug-susceptible TB, €57 213 for multidrug resistant (MDR)-TB and €170 744 for extensively drug resistant (XDR)-TB. In the remaining new EU states, costs amounted to €3427 for drug-susceptible TB and €24 166 for MDR-TB/XDR-TB. For the 70 340 susceptible TB cases, 1488 MDR-TB and 136 XDR-TB cases notified in 2011 costs of €536 890 315 accumulated in 2012. In the same year, the 103 104 disability-adjusted life years caused by these cases, when stated in monetary terms, amounted to a total of €5 361 408 000. Thus, the resulting economic burden of TB in the EU clearly outweighs the cost of investing in more efficient vaccines against TB.

Cost analysis of aquatic biomass systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-07-25

A cost analysis of aquatic biomass systems was conducted to provide the U.S. Department of Energy with engineering cost information on which to base decisions in the area of planning and executing research and development programs dealing with aquatic biomass as an alternative energy resource. Calculations show that several hundred 100 square mile aquatic biomass farms, the size selected by DOE staff for this analysis, would be needed to provide meaningful supplies of energy. With this background, specific engineering analyses were conducted on two original design concepts for 100 square mile aquatic biomass energy farms. These systems were an open-oceanmore » system and a land-based system; outstanding experts in all aspects of this project were called upon to participate and provide information in projecting the costs for harvested aquatic biomass for these systems. It was found that the projections of costs for harvested open-ocean biomass, utilizing optimistic assumptions of scientific and engineering design parameters, appear to be above any practical costs to be considered for energy. One of the major limitations is due to the need to provide upwelled sub-surface water containing needed nutrients, for which pumping energy is required. It is concluded from this analysis that large scale land-based aquatic biomass farms may merit development, but perhaps within a much narrower range than heretofore investigated. Aquatic plants which appear to have potential for development as an energy resource are the so-called emersed plants, or angiosperms, including many types of freshwater weeds such as duckweed, Hydrilla, and water hyacinths. It is recommended that substantially greater basic and applied knowledge on these aquatic biomass are needed, especially on growth rates and nutrient requirements.« less

A Low Cost Approach to Simultaneous Orbit, Attitude, and Rate Estimation Using an Extended Kalman Filter

NASA Technical Reports Server (NTRS)

Deutschmann, Julie; Harman, Rick; Bar-Itzhack, Itzhack

1998-01-01

An innovative approach to autonomous attitude and trajectory estimation is available using only magnetic field data and rate data. The estimation is performed simultaneously using an Extended Kalman Filter, a well known algorithm used extensively in onboard applications. The magnetic field is measured on a satellite by a magnetometer, an inexpensive and reliable sensor flown on virtually all satellites in low earth orbit. Rate data is provided by a gyro, which can be costly. This system has been developed and successfully tested in a post-processing mode using magnetometer and gyro data from 4 satellites supported by the Flight Dynamics Division at Goddard. In order for this system to be truly low cost, an alternative source for rate data must be utilized. An independent system which estimate spacecraft rate has been successfully developed and tested using only magnetometer data or a combination of magnetometer data and sun sensor data, which is less costly than a gyro. This system also uses an Extended Kalman Filter. Merging the two systems will provide an extremely low cost, autonomous approach to attitude and trajectory estimation. In this work we provide the theoretical background of the combined system. The measurement matrix is developed by combining the measurement matrix of the orbit and attitude estimation EKF with the measurement matrix of the rate estimation EKF, which is composed of a pseudo-measurement which makes the effective measurement a function of the angular velocity. Associated with this is the development of the noise covariance matrix associated with the original measurement combined with the new pseudo-measurement. In addition, the combination of the dynamics from the two systems is presented along with preliminary test results.

A low cost approach to simultaneous orbit, attitude, and rate estimation using an extended Kalman filter

NASA Technical Reports Server (NTRS)

Deutschmann, Julie; Harman, Rick; Bar-Itzhack, Itzhack

1998-01-01

An innovative approach to autonomous attitude and trajectory estimation is available using only magnetic field data and rate data. The estimation is performed simultaneously using an Extended Kalman Filter (EKF), a well known algorithm used extensively in onboard applications. The magnetic field is measured on a satellite by a magnetometer, an inexpensive and reliable sensor flown on virtually all satellites in low earth orbit. Rate data is provided by a gyro, which can be costly. This system has been developed and successfully tested in a post-processing mode using magnetometer and gyro data from 4 satellites supported by the Flight Dynamics Division at Goddard. In order for this system to be truly low cost, an alternative source for rate data must be utilized. An independent system which estimates spacecraft rate has been successfully developed and tested using only magnetometer data or a combination of magnetometer data and sun sensor data, which is less costly than a gyro. This system also uses an EKF. Merging the two systems will provide an extremely low cost, autonomous approach to attitude and trajectory estimation. In this work we provide the theoretical background of the combined system. The measurement matrix is developed by combining the measurement matrix of the orbit and attitude estimation EKF with the measurement matrix of the rate estimation EKF, which is composed of a pseudo-measurement which makes the effective measurement a function of the angular velocity. Associated with this is the development of the noise covariance matrix associated with the original measurement combined with the new pseudo-measurement. In addition, the combination of the dynamics from the two systems is presented along with preliminary test results.

Cost effective development of a national test bed

NASA Technical Reports Server (NTRS)

Waites, H. B.; Jones, V. L.; Seltzer, S. M.

1988-01-01

For several years, the Marshall Space Flight Center has pursued the coordinated development of a Large Space Structures (LSS) National Test Bed for the investigation of numerous technical issues involved in the use of LSS in space. The origins of this development, the current status of the various test facilities and the plans laid down for the next five years' activities are described. Particular emphasis on the control and structural interaction issues has been paid so far; however, immediately emerging are user applications (such as the proposed pinhole occulter facility). In the immediate future, such emerging technologies as smart robots and multibody interactions will be studied. These areas are covered.

An Explanation of Pupil Transportation Costs, Seattle School District No. 1. Report No. 78-29.

ERIC Educational Resources Information Center

Collister, Larry

The state of Washington is moving towards the assumption of the full costs of public school student transportation. This move has increased interest at the state level in transportation costs originating at the local district level. These costs have been relatively high in the Seattle school district, complicated by the city's geographic and…

18 CFR 4.20 - Initial statement.

Code of Federal Regulations, 2014 CFR

2014-04-01

... PROJECT COSTS Determination of Cost of Constructed Projects not Subject to Section 23(a) of the Act § 4.20 Initial statement. (a) Notification of Commission. In all cases where licenses are issued for projects... letter shall also include a statement to the effect that actual legitimate original cost, or if not known...

18 CFR 4.20 - Initial statement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... PROJECT COSTS Determination of Cost of Constructed Projects not Subject to Section 23(a) of the Act § 4.20 Initial statement. (a) Notification of Commission. In all cases where licenses are issued for projects... letter shall also include a statement to the effect that actual legitimate original cost, or if not known...

18 CFR 4.20 - Initial statement.

Code of Federal Regulations, 2013 CFR

2013-04-01

... PROJECT COSTS Determination of Cost of Constructed Projects not Subject to Section 23(a) of the Act § 4.20 Initial statement. (a) Notification of Commission. In all cases where licenses are issued for projects... letter shall also include a statement to the effect that actual legitimate original cost, or if not known...

18 CFR 4.20 - Initial statement.

Code of Federal Regulations, 2011 CFR

2011-04-01

... PROJECT COSTS Determination of Cost of Constructed Projects not Subject to Section 23(a) of the Act § 4.20 Initial statement. (a) Notification of Commission. In all cases where licenses are issued for projects... letter shall also include a statement to the effect that actual legitimate original cost, or if not known...

18 CFR 4.20 - Initial statement.

Code of Federal Regulations, 2012 CFR

2012-04-01

... PROJECT COSTS Determination of Cost of Constructed Projects not Subject to Section 23(a) of the Act § 4.20 Initial statement. (a) Notification of Commission. In all cases where licenses are issued for projects... letter shall also include a statement to the effect that actual legitimate original cost, or if not known...

48 CFR 9903.301 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contract (including options). Deferred compensation. See 9904.415-30. Defined-benefit pension plan. See.... See 9904.403-30. Original complement of low cost equipment. See 9904.404-30. Pay-as-you-go cost method... and maintenance. See 9904.404-30. Reporting costs. See 9904.401-30. Residual value. See 9904.409-30...

48 CFR 9903.301 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contract (including options). Deferred compensation. See 9904.415-30. Defined-benefit pension plan. See.... See 9904.403-30. Original complement of low cost equipment. See 9904.404-30. Pay-as-you-go cost method... and maintenance. See 9904.404-30. Reporting costs. See 9904.401-30. Residual value. See 9904.409-30...

48 CFR 9903.301 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contract (including options). Deferred compensation. See 9904.415-30. Defined-benefit pension plan. See.... See 9904.403-30. Original complement of low cost equipment. See 9904.404-30. Pay-as-you-go cost method... and maintenance. See 9904.404-30. Reporting costs. See 9904.401-30. Residual value. See 9904.409-30...

7 CFR 3560.65 - Reserve account.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-year period. The reserve account analysis is based on either a Capital Needs Assessment or life cycle... Assessment or as part of the original life cycle cost analysis. The cost of conducting either a Capital Needs... Needs Assessment or life cycle cost analysis may be included in the loan financing. (b) For ownership...

7 CFR 3560.65 - Reserve account.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-year period. The reserve account analysis is based on either a Capital Needs Assessment or life cycle... Assessment or as part of the original life cycle cost analysis. The cost of conducting either a Capital Needs... Needs Assessment or life cycle cost analysis may be included in the loan financing. (b) For ownership...

47 CFR 32.2422 - Underground cable.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cable. This subsidiary record category shall include the original cost of optical fiber cable and other..., Buried Cable. (d) The cost of cables leading from the main distributing frame or equivalent to central...

47 CFR 32.2422 - Underground cable.

Code of Federal Regulations, 2010 CFR

2010-10-01

... cable. This subsidiary record category shall include the original cost of optical fiber cable and other..., Buried Cable. (d) The cost of cables leading from the main distributing frame or equivalent to central...

47 CFR 32.2422 - Underground cable.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cable. This subsidiary record category shall include the original cost of optical fiber cable and other..., Buried Cable. (d) The cost of cables leading from the main distributing frame or equivalent to central...

47 CFR 32.2422 - Underground cable.

Code of Federal Regulations, 2011 CFR

2011-10-01

... cable. This subsidiary record category shall include the original cost of optical fiber cable and other..., Buried Cable. (d) The cost of cables leading from the main distributing frame or equivalent to central...

47 CFR 32.2422 - Underground cable.

Code of Federal Regulations, 2012 CFR

2012-10-01

... cable. This subsidiary record category shall include the original cost of optical fiber cable and other..., Buried Cable. (d) The cost of cables leading from the main distributing frame or equivalent to central...

SAMIS- STANDARD ASSEMBLY-LINE MANUFACTURING INDUSTRY SIMULATION

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1994-01-01

The Standard Assembly-Line Manufacturing Industry Simulation (SAMIS) program was originally developed to model a hypothetical U. S. industry which manufactures silicon solar modules for use in electricity generation. The SAMIS program has now been generalized to the extent that it should be useful for simulating many different production-line manufacturing industries and companies. The most important capability of SAMIS is its ability to "simulate" an industry based on a model developed by the user with the aid of the SAMIS program. The results of the simulation are a set of financial reports which detail the requirements, including quantities and cost, of the companies and processes which comprise the industry. SAMIS provides a fair, consistent, and reliable means of comparing manufacturing processes being developed by numerous independent efforts. It can also be used to assess the industry-wide impact of changes in financial parameters, such as cost of resources and services, inflation rates, interest rates, tax policies, and required return on equity. Because of the large amount of data needed to describe an industry, a major portion of SAMIS is dedicated to data entry and maintenance. This activity in SAMIS is referred to as model management. Model management requires a significant amount of interaction through a system of "prompts" which make it possible for persons not familiar with computers, or the SAMIS program, to provide all of the data necessary to perform a simulation. SAMIS is written in TURBO PASCAL (version 2.0 required for compilation) and requires 10 meg of hard disk space, an 8087 coprocessor, and an IBM color graphics monitor. Executables and source code are provided. SAMIS was originally developed in 1978; the IBM PC version was developed in 1985. Release 6.1 was made available in 1986, and includes the PC-IPEG program.

Improvements, testing and development of the ADM-τ sub-grid surface tension model for two-phase LES

NASA Astrophysics Data System (ADS)

Aniszewski, Wojciech

2016-12-01

In this paper, a specific subgrid term occurring in Large Eddy Simulation (LES) of two-phase flows is investigated. This and other subgrid terms are presented, we subsequently elaborate on the existing models for those and re-formulate the ADM-τ model for sub-grid surface tension previously published by these authors. This paper presents a substantial, conceptual simplification over the original model version, accompanied by a decrease in its computational cost. At the same time, it addresses the issues the original model version faced, e.g. introduces non-isotropic applicability criteria based on resolved interface's principal curvature radii. Additionally, this paper introduces more throughout testing of the ADM-τ, in both simple and complex flows.

Sojourner Rover View of Cloddy Deposits near Pooh Bear

NASA Technical Reports Server (NTRS)

1997-01-01

Sojourner's observations in the Ares region on Mars raise and answer questions about the origins of the rocks and other deposits found there. Deposits are not the same everywhere. Bright, fine-grained drifts (right center) are abundant as thin (less than a few centimeters), discontinuous ridged sheets and wind tails that overlie cloddy deposits of dust, clods, and tiny (less than 1 cm) rocks.

NOTE: original caption as published in Science Magazine

Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology (Caltech).

Comparative cost effectiveness of varicella, hepatitis A, and pneumococcal conjugate vaccines.

PubMed

Jacobs, R J; Meyerhoff, A S

2001-12-01

Several state and local U.S. governments are considering making varicella, hepatitis A, and/or pneumococcal conjugate vaccination conditions of day care or school entry. These requirements will likely be issued sequentially, because simultaneous mandates exacerbate budget constraints and complicate communication with parents and providers. Cost-effectiveness assessments should aid the establishment of vaccination priorities, but comparing results of published studies is confounded by their dissimilar methods. We reviewed U.S. cost-effectiveness studies of childhood varicella, hepatitis A, and pneumococcal conjugate vaccines and identified four providing data required to standardize methods. Vaccination, disease treatment, and work-loss costs were estimated from original study results and current prices. Estimated life-years saved were derived from original study results, epidemiological evidence, and alternative procedures for discounting to present values. Hepatitis A vaccine would have the lowest health system costs per life-year saved. Varicella vaccine would provide the greatest reduction in societal costs, mainly through reduced parent work loss. Pneumococcal conjugate vaccine would cost twice the amount of varicella and hepatitis A vaccines combined and be less cost effective than the other vaccines. Hepatitis A and varicella vaccines, but not pneumococcal conjugate vaccine, meet or exceed conventional standards of cost effectiveness. Copyright 2001 American Health Foundation and Elsevier Science.

IPEG- IMPROVED PRICE ESTIMATION GUIDELINES (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Aster, R. W.

1994-01-01

The Improved Price Estimation Guidelines, IPEG, program provides a simple yet accurate estimate of the price of a manufactured product. IPEG facilitates sensitivity studies of price estimates at considerably less expense than would be incurred by using the Standard Assembly-line Manufacturing Industry Simulation, SAMIS, program (COSMIC program NPO-16032). A difference of less than one percent between the IPEG and SAMIS price estimates has been observed with realistic test cases. However, the IPEG simplification of SAMIS allows the analyst with limited time and computing resources to perform a greater number of sensitivity studies than with SAMIS. Although IPEG was developed for the photovoltaics industry, it is readily adaptable to any standard assembly line type of manufacturing industry. IPEG estimates the annual production price per unit. The input data includes cost of equipment, space, labor, materials, supplies, and utilities. Production on an industry wide basis or a process wide basis can be simulated. Once the IPEG input file is prepared, the original price is estimated and sensitivity studies may be performed. The IPEG user selects a sensitivity variable and a set of values. IPEG will compute a price estimate and a variety of other cost parameters for every specified value of the sensitivity variable. IPEG is designed as an interactive system and prompts the user for all required information and offers a variety of output options. The IPEG/PC program is written in TURBO PASCAL for interactive execution on an IBM PC computer under DOS 2.0 or above with at least 64K of memory. The IBM PC color display and color graphics adapter are needed to use the plotting capabilities in IPEG/PC. IPEG/PC was developed in 1984. The original IPEG program is written in SIMSCRIPT II.5 for interactive execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The original IPEG was developed in 1980.

IPEG- IMPROVED PRICE ESTIMATION GUIDELINES (IBM 370 VERSION)

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1994-01-01

The Improved Price Estimation Guidelines, IPEG, program provides a simple yet accurate estimate of the price of a manufactured product. IPEG facilitates sensitivity studies of price estimates at considerably less expense than would be incurred by using the Standard Assembly-line Manufacturing Industry Simulation, SAMIS, program (COSMIC program NPO-16032). A difference of less than one percent between the IPEG and SAMIS price estimates has been observed with realistic test cases. However, the IPEG simplification of SAMIS allows the analyst with limited time and computing resources to perform a greater number of sensitivity studies than with SAMIS. Although IPEG was developed for the photovoltaics industry, it is readily adaptable to any standard assembly line type of manufacturing industry. IPEG estimates the annual production price per unit. The input data includes cost of equipment, space, labor, materials, supplies, and utilities. Production on an industry wide basis or a process wide basis can be simulated. Once the IPEG input file is prepared, the original price is estimated and sensitivity studies may be performed. The IPEG user selects a sensitivity variable and a set of values. IPEG will compute a price estimate and a variety of other cost parameters for every specified value of the sensitivity variable. IPEG is designed as an interactive system and prompts the user for all required information and offers a variety of output options. The IPEG/PC program is written in TURBO PASCAL for interactive execution on an IBM PC computer under DOS 2.0 or above with at least 64K of memory. The IBM PC color display and color graphics adapter are needed to use the plotting capabilities in IPEG/PC. IPEG/PC was developed in 1984. The original IPEG program is written in SIMSCRIPT II.5 for interactive execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The original IPEG was developed in 1980.

Microfluidic diagnostics for low-resource settings

NASA Astrophysics Data System (ADS)

Hawkins, Kenneth R.; Weigl, Bernhard H.

2010-02-01

Diagnostics for low-resource settings need to be foremost inexpensive, but also accurate, reliable, rugged and suited to the contexts of the developing world. Diagnostics for global health, based on minimally-instrumented, microfluidicsbased platforms employing low-cost disposables, has become a very active research area recently-thanks, in part, to new funding from the Bill & Melinda Gates Foundation, the National Institutes of Health, and other sources. This has led to a number of interesting prototype devices that are now in advanced development or clinical validation. These devices include disposables and instruments that perform multiplexed PCR-based assays for enteric, febrile, and vaginal diseases, as well as immunoassays for diseases such as malaria, HIV, and various sexually transmitted diseases. More recently, instrument-free diagnostic disposables based on isothermal nucleic-acid amplification have been developed. Regardless of platform, however, the search for truly low-cost manufacturing methods that would enable affordable systems (at volume, in the appropriate context) remains a significant challenge. Here we give an overview of existing platform development efforts, present some original research in this area at PATH, and reiterate a call to action for more.

ELIPGRID-PC: A PC program for calculating hot spot probabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davidson, J.R.

1994-10-01

ELIPGRID-PC, a new personal computer program has been developed to provide easy access to Singer`s 1972 ELIPGRID algorithm for hot-spot detection probabilities. Three features of the program are the ability to determine: (1) the grid size required for specified conditions, (2) the smallest hot spot that can be sampled with a given probability, and (3) the approximate grid size resulting from specified conditions and sampling cost. ELIPGRID-PC also provides probability of hit versus cost data for graphing with spread-sheets or graphics software. The program has been successfully tested using Singer`s published ELIPGRID results. An apparent error in the original ELIPGRIDmore » code has been uncovered and an appropriate modification incorporated into the new program.« less

KSC-2012-5909

NASA Image and Video Library

2012-10-19

VAN HORN, Texas – Blue Origin’s New Shepard crew capsule touched down 1,630 feet from the its simulated propulsion module launch pad at the company's West Texas launch site, completing a successful test of its New Shepard crew capsule escape system. The pusher escape system was designed and developed by Blue Origin to allow crew escape in the event of an emergency during any phase of ascent for its suborbital New Shepard system. As part of an incremental development program, the results of this test will shape the design of the escape system for the company's orbital biconic-shaped Space Vehicle. The system is expected to enable full reusability of the launch vehicle, which is different from NASA's previous launch escape systems that would pull a spacecraft away from its rocket before reaching orbit. The test was part of Blue Origin's work supporting its funded Space Act Agreement with NASA during Commercial Crew Development Round 2 CCDev2). Through initiatives like CCDev2, NASA is fostering the development of a U.S. commercial crew space transportation capability with the goal of achieving safe, reliable and cost-effective access to and from the International Space Station and low-Earth orbit. After the capability is matured and available to the government and other customers, NASA could contract to purchase commercial services to meet its station crew transportation needs. For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

KSC-2012-5908

NASA Image and Video Library

2012-10-19

VAN HORN, Texas – Blue Origin’s New Shepard crew capsule escaped to an altitude of 2,307 feet before deploying parachutes for a safe return for a pad escape test at the company's West Texas launch site. The pusher escape system was designed and developed by Blue Origin to allow crew escape in the event of an emergency during any phase of ascent for its suborbital New Shepard system. As part of an incremental development program, the results of this test will shape the design of the escape system for the company's orbital biconic-shaped Space Vehicle. The system is expected to enable full reusability of the launch vehicle, which is different from NASA's previous launch escape systems that would pull a spacecraft away from its rocket before reaching orbit. The test was part of Blue Origin's work supporting its funded Space Act Agreement with NASA during Commercial Crew Development Round 2 CCDev2). Through initiatives like CCDev2, NASA is fostering the development of a U.S. commercial crew space transportation capability with the goal of achieving safe, reliable and cost-effective access to and from the International Space Station and low-Earth orbit. After the capability is matured and available to the government and other customers, NASA could contract to purchase commercial services to meet its station crew transportation needs. For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

Development and production of second generation high Tc superconducting tapes at SuperOx and first tests of model cables

NASA Astrophysics Data System (ADS)

Lee, S.; Petrykin, V.; Molodyk, A.; Samoilenkov, S.; Kaul, A.; Vavilov, A.; Vysotsky, V.; Fetisov, S.

2014-04-01

The SuperOx and SuperOx Japan LLC companies were founded with the goal of developing a cost-effective technology for second generation HTS (2G HTS) tapes by utilizing a combination of the most advanced chemical and physical deposition techniques, together with implementing original tape architectures. In this paper we present a brief overview of our production and experimental facilities and recent results of 2G HTS tape fabrication, and describe the first tests of the tapes in model cables for AC and DC power application.

Development of ultrasound/endoscopy PACS (picture archiving and communication system) and investigation of compression method for cine images

NASA Astrophysics Data System (ADS)

Osada, Masakazu; Tsukui, Hideki

2002-09-01

ABSTRACT Picture Archiving and Communication System (PACS) is a system which connects imaging modalities, image archives, and image workstations to reduce film handling cost and improve hospital workflow. Handling diagnostic ultrasound and endoscopy images is challenging, because it produces large amount of data such as motion (cine) images of 30 frames per second, 640 x 480 in resolution, with 24-bit color. Also, it requires enough image quality for clinical review. We have developed PACS which is able to manage ultrasound and endoscopy cine images with above resolution and frame rate, and investigate suitable compression method and compression rate for clinical image review. Results show that clinicians require capability for frame-by-frame forward and backward review of cine images because they carefully look through motion images to find certain color patterns which may appear in one frame. In order to satisfy this quality, we have chosen motion JPEG, installed and confirmed that we could capture this specific pattern. As for acceptable image compression rate, we have performed subjective evaluation. No subjects could tell the difference between original non-compressed images and 1:10 lossy compressed JPEG images. One subject could tell the difference between original and 1:20 lossy compressed JPEG images although it is acceptable. Thus, ratios of 1:10 to 1:20 are acceptable to reduce data amount and cost while maintaining quality for clinical review.

Improving mixing efficiency of a polymer micromixer by use of a plastic shim divider

NASA Astrophysics Data System (ADS)

Li, Lei; Lee, L. James; Castro, Jose M.; Yi, Allen Y.

2010-03-01

In this paper, a critical modification to a polymer based affordable split-and-recombination static micromixer is described. To evaluate the improvement, both the original and the modified design were carefully investigated using an experimental setup and numerical modeling approach. The structure of the micromixer was designed to take advantage of the process capabilities of both ultraprecision micromachining and microinjection molding process. Specifically, the original and the modified design were numerically simulated using commercial finite element method software ANSYS CFX to assist the re-designing of the micromixers. The simulation results have shown that both designs are capable of performing mixing while the modified design has a much improved performance. Mixing experiments with two different fluids were carried out using the original and the modified mixers again showed a significantly improved mixing uniformity by the latter. The measured mixing coefficient for the original design was 0.11, and for the improved design it was 0.065. The developed manufacturing process based on ultraprecision machining and microinjection molding processes for device fabrication has the advantage of high-dimensional precision, low cost and manufacturing flexibility.

Generalized Redistribute-to-the-Right Algorithm: Application to the Analysis of Censored Cost Data

PubMed Central

CHEN, SHUAI; ZHAO, HONGWEI

2013-01-01

Medical cost estimation is a challenging task when censoring of data is present. Although researchers have proposed methods for estimating mean costs, these are often derived from theory and are not always easy to understand. We provide an alternative method, based on a replace-from-the-right algorithm, for estimating mean costs more efficiently. We show that our estimator is equivalent to an existing one that is based on the inverse probability weighting principle and semiparametric efficiency theory. We also propose an alternative method for estimating the survival function of costs, based on the redistribute-to-the-right algorithm, that was originally used for explaining the Kaplan–Meier estimator. We show that this second proposed estimator is equivalent to a simple weighted survival estimator of costs. Finally, we develop a more efficient survival estimator of costs, using the same redistribute-to-the-right principle. This estimator is naturally monotone, more efficient than some existing survival estimators, and has a quite small bias in many realistic settings. We conduct numerical studies to examine the finite sample property of the survival estimators for costs, and show that our new estimator has small mean squared errors when the sample size is not too large. We apply both existing and new estimators to a data example from a randomized cardiovascular clinical trial. PMID:24403869

Optimal tracking and testing of U.S. and Canadian herds for BSE: a value-of-information (VOI) approach.

PubMed

Cox, Louis Anthony; Popken, Douglas A; VanSickle, John J; Sahu, Ranajit

2005-08-01

The U.S. Department of Agriculture (USDA) tests a subset of cattle slaughtered in the United States for bovine spongiform encephalitis (BSE). Knowing the origin of cattle (U.S. vs. Canadian) at testing could enable new testing or surveillance policies based on the origin of cattle testing positive. For example, if a Canadian cow tests positive for BSE, while no U.S. origin cattle do, the United States could subject Canadian cattle to more stringent testing. This article illustrates the application of a value-of-information (VOI) framework to quantify and compare potential economic costs to the United States of implementing tracking cattle origins to the costs of not doing so. The potential economic value of information from a tracking program is estimated to exceed its costs by more than five-fold if such information can reduce future losses in export and domestic markets and reduce future testing costs required to reassure or win back customers. Sensitivity analyses indicate that this conclusion is somewhat robust to many technical, scientific, and market uncertainties, including the current prevalence of BSE in the United States and/or Canada and the likely reactions of consumers to possible future discoveries of BSE in the United States and/or Canada. Indeed, the potential value of tracking information is great enough to justify locating and tracking Canadian cattle already in the United States when this can be done for a reasonable cost. If aggressive tracking and testing can win back lost exports, then the VOI of a tracking program may increase to over half a billion dollars per year.

42 CFR 417.454 - Charges to Medicare enrollees.

Code of Federal Regulations, 2011 CFR

2011-10-01

... § 410.152(l)). (e) Services for which cost sharing may not exceed cost sharing under original Medicare... nursing care defined as services provided during a covered stay in a skilled nursing facility during the...

19 CFR 10.195 - Country of origin criteria.

Code of Federal Regulations, 2011 CFR

2011-04-01

... cost or value of the material produced in a beneficiary country or countries, plus the direct costs of... juice by adding water to orange juice concentrate; and (G) Diluting chemicals with inert ingredients to...

19 CFR 10.195 - Country of origin criteria.

Code of Federal Regulations, 2014 CFR

2014-04-01

... cost or value of the material produced in a beneficiary country or countries, plus the direct costs of... juice by adding water to orange juice concentrate; and (G) Diluting chemicals with inert ingredients to...

19 CFR 10.195 - Country of origin criteria.

Code of Federal Regulations, 2013 CFR

2013-04-01

... cost or value of the material produced in a beneficiary country or countries, plus the direct costs of... juice by adding water to orange juice concentrate; and (G) Diluting chemicals with inert ingredients to...

19 CFR 10.195 - Country of origin criteria.

Code of Federal Regulations, 2012 CFR

2012-04-01

... cost or value of the material produced in a beneficiary country or countries, plus the direct costs of... juice by adding water to orange juice concentrate; and (G) Diluting chemicals with inert ingredients to...

42 CFR 417.454 - Charges to Medicare enrollees.

Code of Federal Regulations, 2012 CFR

2012-10-01

... preventive services (as defined in § 410.152(l)). (e) Services for which cost sharing may not exceed cost...(b)(14)(B) of the Act. (3) Skilled nursing care defined as services provided during a covered stay in a skilled nursing facility during the period for which cost sharing would apply under Original...

42 CFR 417.454 - Charges to Medicare enrollees.

Code of Federal Regulations, 2013 CFR

2013-10-01

... preventive services (as defined in § 410.152(l)). (e) Services for which cost sharing may not exceed cost...(b)(14)(B) of the Act. (3) Skilled nursing care defined as services provided during a covered stay in a skilled nursing facility during the period for which cost sharing would apply under Original...

42 CFR 417.454 - Charges to Medicare enrollees.

Code of Federal Regulations, 2014 CFR

2014-10-01

... preventive services (as defined in § 410.152(l)). (e) Services for which cost sharing may not exceed cost...(b)(14)(B) of the Act. (3) Skilled nursing care defined as services provided during a covered stay in a skilled nursing facility during the period for which cost sharing would apply under Original...

Cost-Cutting in Higher Education: Lessons Learned from Collaboration, Technology, and Outsourcing Initiatives. Draft.

ERIC Educational Resources Information Center

Kaganoff, Tessa

This document presents a review of cost-containment initiatives relevant to higher education institutions. Originally commissioned to examine cost containment initiatives carried out by institutions affiliated with the Foundation for Independent Higher Education (FIHE), the paper was expanded to include a sector-wide review of three types of…

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Package/Offer. Two (2) original signed copies of this solicitation package/offer. All applicable sections... exception to submitting cost or pricing data shall be made in accordance with FAR 52.215-20(a). (iii) If the... data, the offeror's cost proposal shall conform with the requirements of FAR 52.215-20(b). Cost...

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Package/Offer. Two (2) original signed copies of this solicitation package/offer. All applicable sections... exception to submitting cost or pricing data shall be made in accordance with FAR 52.215-20(a). (iii) If the... data, the offeror's cost proposal shall conform with the requirements of FAR 52.215-20(b). Cost...

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Package/Offer. Two (2) original signed copies of this solicitation package/offer. All applicable sections... exception to submitting cost or pricing data shall be made in accordance with FAR 52.215-20(a). (iii) If the... data, the offeror's cost proposal shall conform with the requirements of FAR 52.215-20(b). Cost...

RETHINKING THE ROLE OF CLINICAL TRIAL DATA IN INTERNATIONAL INTELLECTUAL PROPERTY LAW: THE CASE FOR A PUBLIC GOODS APPROACH

PubMed Central

REICHMAN, JEROME H.

2009-01-01

This article describes the growth and consequences of new intellectual property rights given to pharmaceutical developers, and it advocates treating clinical trials as a public good. Although the soaring cost of clinical trials is well known and discussed, too little attention is given to the underlying rationale for allowing drug developers to recoup their costs through the new intellectual property rights provided in multilateral, regional, and bilateral agreements. Known in the US as “market exclusivity” and in Europe as “data exclusivity,” these rights prohibit would-be generic producers from obtaining regulatory approval based on the original producers’ undisclosed test data. Market and data exclusivity is codified in US and European domestic law as well as the North American Free Trade Agreement (NAFTA) and, to a lesser degree, the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS). Market and data exclusivity is binding an increasing number of developing countries via Free Trade Agreements (FTAs), which hinder developing countries from manufacturing generic drugs. At a minimum, negotiators should replace the norm of exclusive control over data with a liability rule, or take and pay rule, in which generic manufacturers can use original manufacturers’ clinical trial data in exchange for reasonable compensation. A more fundamental solution requires questioning the status quo of proprietary clinical trial data. The conventional wisdom is that market and data exclusivity, and drug developers’ consequent ability to limit competition from generics above and beyond patent protection, are a necessary incentive for drug developers to fund ever more expensive clinical trials. Clinical trial data, however, are public goods that will be undersupplied and over protected so long as private actors provide them. Moreover, manufacturers have an incentive to present clinical trial data so that they support regulatory approval at the expense of public health. Although liability rules are better than the status quo, they would not resolve the problem of treating a public good as proprietary. Governments should thus oversee and fund clinical trials as the public good that they are. Clinical tests should be awarded to the most qualified scientists through a competitive process, financed in part with the decrease in drug costs to governmental health care programs and in part with drug developers’ contributions, selected to maximize social benefit, and made global via intergovernmental bodies to maximize social return. This would reduce the cost of redundant investigations to the global public health system, lower supply costs to drug consumers, and lower the breakeven point for investment in research to discover new drugs. PMID:20431702

Installed Cost Benchmarks and Deployment Barriers for Residential Solar Photovoltaics with Energy Storage: Q1 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ardani, Kristen; O'Shaughnessy, Eric; Fu, Ran

2016-12-01

In this report, we fill a gap in the existing knowledge about PV-plus-storage system costs and value by providing detailed component- and system-level installed cost benchmarks for residential systems. We also examine other barriers to increased deployment of PV-plus-storage systems in the residential sector. The results are meant to help technology manufacturers, installers, and other stakeholders identify cost-reduction opportunities and inform decision makers about regulatory, policy, and market characteristics that impede solar plus storage deployment. In addition, our periodic cost benchmarks will document progress in cost reductions over time. To analyze costs for PV-plus-storage systems deployed in the first quartermore » of 2016, we adapt the National Renewable Energy Laboratory's component- and system-level cost-modeling methods for standalone PV. In general, we attempt to model best-in-class installation techniques and business operations from an installed-cost perspective. In addition to our original analysis, model development, and review of published literature, we derive inputs for our model and validate our draft results via interviews with industry and subject-matter experts. One challenge to analyzing the costs of PV-plus-storage systems is choosing an appropriate cost metric. Unlike standalone PV, energy storage lacks universally accepted cost metrics, such as dollars per watt of installed capacity and lifetime levelized cost of energy. We explain the difficulty of arriving at a standard approach for reporting storage costs and then provide the rationale for using the total installed costs of a standard PV-plus-storage system as our primary metric, rather than using a system-size-normalized metric.« less

How much could be saved in Chinese hospitals in procurement of anti-hypertensives and anti-diabetics?

PubMed

Sun, Jing; Ren, Luo; Wirtz, Veronika

2016-09-01

Efficient use of government funding has been increasingly relevant for the success and sustainability of ongoing health-system reform in China; however, as there is no generic substitution policy, patients and basic health-insurance programs pay more for public-preferred brand originators. Such phenomenon is especially typical in public hospitals. The objective of this study is to estimate the potential cost savings in procurement by Chinese public hospitals when switching from brand originators of anti-hypertensive and anti-diabetic medications to their generic equivalents between 2012-2014. IMS Health volume and value consumption data (IMS China Hospitals Audit system 2012-2014) were used, which covered all Chinese hospitals with 100 beds and above. The top 60% IMS volume consumption of respective anti-hypertensive and anti-diabetic medication with unique dosage form and strength were included. The potential cost savings were calculated from a switch of brand originators with their generic equivalents on the Chinese and international market. An independent sample t-test was conducted to compare the difference of proportion of cost savings in value between the Chinese and international market. An average of 44% (US$44 million) and 87% (US$90 million) and a total of US$1.4 and 2.8 billion (2014 US$) could be saved from a switch from originator brand anti-hypertensives and anti-diabetics to domestically and internationally available generic equivalents, respectively. The differences of cost savings (in proportion) between domestic and international market were statistically significant (α = 0.005, p = 0.003, p = 0.002, p = 0.000). Expensive brand originators dominated the anti-hypertensive and anti-diabetic market in Chinese hospitals between 2012-2014. Preference of brand originators wastes a huge amount of health resources in China and these limited resources could have been used more efficiently. As one of the world's key generic suppliers, if China wants to use its health resource more efficiently on medicines, comprehensive measures are needed to address both demand-side (consumers' low trust in the quality of local generics) and supply-side barriers (health professionals' preference of brand originators).

Economic burden of smoking: a systematic review of direct and indirect costs.

PubMed

Rezaei, Satar; Akbari Sari, Ali; Arab, Mohammad; Majdzadeh, Reza; Mohammad Poorasl, Asghar

2016-01-01

Smoking imposes considerably high economic costs both on the healthcare system as well as on a country as a whole. This study was aimed at systematically reviewing the currently published literature on the direct and indirect costs associated with smoking globally. A systematic review was performed on systematically searched articles from PubMed and Scopus databases published during the period 1990 to 2014. A combination of key terms such as "economic burden", "direct cost", "indirect cost", and smoking, tobacco or cigarette" and "productivity lost was used for the search. Original research article published in English with the age of study population greater than 35 years, at least three smoking-related diseases and reported direct or indirect cost of smoking were the inclusion criteria. Fourteen original articles were included in the review. The cost of outpatient care and premature deaths were found to be the most important cost driver of direct and indirect costs respectively. The study showed that smoking-related diseases were responsible for 1.5 - 6.8 % of the national health system expenditures and 0.22-0.88% of GDP of a country. Our review indicated that the costs of smoking are substantial, and smoking have a significant impact on the economy of a country. Policies such as increasing the taxation on a cigarette are required and should be implemented to reduce the economic burden of smoking.

Cost comparison and economic implications of commonly used originator and generic chemotherapy drugs in India.

PubMed

Lopes, G de L

2013-09-01

Cancer treatments have improved outcomes but access to medications is an issue around the world and especially so in low- and middle-income countries, such as India. Generic substitution may lead to significant cost savings. The author aimed to compare the cost and estimate potential cost savings per cycle, per patient, and for the country as a whole with generic substitution of frequently used chemotherapy drugs in the treatment of common cancers in India. Generic paclitaxel (Taxol), docetaxel (Taxotere), gemcitabine, oxaliplatin and irinotecan cost from 8.9% to 36% of their equivalent branded originator drug, resulting in cost savings of ~ Indian Rupees (INR) 11,000 to >INR 90,000 (USD 200-1600, Euro 160-1300) per cycle; and ~INR 50,000 to >INR 240,000 (USD 900-4300, Euro 700-3400) per patient. Overall, potential yearly savings for health systems in India were nearly INR 47 billion (~USD 843 million, Euro 670 million). In conclusion, generic substitution for frequently used chemotherapy drugs in the treatment of common cancers has an enormous potential to generate significant cost savings and increase access to cancer treatments in India and other low- and middle-income countries.

The High Cost of Prescription Drugs in the United States: Origins and Prospects for Reform.

PubMed

Kesselheim, Aaron S; Avorn, Jerry; Sarpatwari, Ameet

The increasing cost of prescription drugs in the United States has become a source of concern for patients, prescribers, payers, and policy makers. To review the origins and effects of high drug prices in the US market and to consider policy options that could contain the cost of prescription drugs. We reviewed the peer-reviewed medical and health policy literature from January 2005 to July 2016 for articles addressing the sources of drug prices in the United States, the justifications and consequences of high prices, and possible solutions. Per capita prescription drug spending in the United States exceeds that in all other countries, largely driven by brand-name drug prices that have been increasing in recent years at rates far beyond the consumer price index. In 2013, per capita spending on prescription drugs was $858 compared with an average of $400 for 19 other industrialized nations. In the United States, prescription medications now comprise an estimated 17% of overall personal health care services. The most important factor that allows manufacturers to set high drug prices is market exclusivity, protected by monopoly rights awarded upon Food and Drug Administration approval and by patents. The availability of generic drugs after this exclusivity period is the main means of reducing prices in the United States, but access to them may be delayed by numerous business and legal strategies. The primary counterweight against excessive pricing during market exclusivity is the negotiating power of the payer, which is currently constrained by several factors, including the requirement that most government drug payment plans cover nearly all products. Another key contributor to drug spending is physician prescribing choices when comparable alternatives are available at different costs. Although prices are often justified by the high cost of drug development, there is no evidence of an association between research and development costs and prices; rather, prescription drugs are priced in the United States primarily on the basis of what the market will bear. High drug prices are the result of the approach the United States has taken to granting government-protected monopolies to drug manufacturers, combined with coverage requirements imposed on government-funded drug benefits. The most realistic short-term strategies to address high prices include enforcing more stringent requirements for the award and extension of exclusivity rights; enhancing competition by ensuring timely generic drug availability; providing greater opportunities for meaningful price negotiation by governmental payers; generating more evidence about comparative cost-effectiveness of therapeutic alternatives; and more effectively educating patients, prescribers, payers, and policy makers about these choices.

Optimum swimming pathways of fish spawning migrations in rivers

USGS Publications Warehouse

McElroy, Brandon; DeLonay, Aaron; Jacobson, Robert

2012-01-01

Fishes that swim upstream in rivers to spawn must navigate complex fluvial velocity fields to arrive at their ultimate locations. One hypothesis with substantial implications is that fish traverse pathways that minimize their energy expenditure during migration. Here we present the methodological and theoretical developments necessary to test this and similar hypotheses. First, a cost function is derived for upstream migration that relates work done by a fish to swimming drag. The energetic cost scales with the cube of a fish's relative velocity integrated along its path. By normalizing to the energy requirements of holding a position in the slowest waters at the path's origin, a cost function is derived that depends only on the physical environment and not on specifics of individual fish. Then, as an example, we demonstrate the analysis of a migration pathway of a telemetrically tracked pallid sturgeon (Scaphirhynchus albus) in the Missouri River (USA). The actual pathway cost is lower than 105 random paths through the surveyed reach and is consistent with the optimization hypothesis. The implication—subject to more extensive validation—is that reproductive success in managed rivers could be increased through manipulation of reservoir releases or channel morphology to increase abundance of lower-cost migration pathways.

Financial Management of a Large Multi-site Randomized Clinical Trial

PubMed Central

Sheffet, Alice J.; Flaxman, Linda; Tom, MeeLee; Hughes, Susan E.; Longbottom, Mary E.; Howard, Virginia J.; Marler, John R.; Brott, Thomas G.

2014-01-01

Background The Carotid Revascularization Endarterectomy versus Stenting Trial (CREST) received five years’ funding ($21,112,866) from the National Institutes of Health to compare carotid stenting to surgery for stroke prevention in 2,500 randomized participants at 40 sites. Aims Herein we evaluate the change in the CREST budget from a fixed to variable-cost model and recommend strategies for the financial management of large-scale clinical trials. Methods Projections of the original grant’s fixed-cost model were compared to the actual costs of the revised variable-cost model. The original grant’s fixed-cost budget included salaries, fringe benefits, and other direct and indirect costs. For the variable-cost model, the costs were actual payments to the clinical sites and core centers based upon actual trial enrollment. We compared annual direct and indirect costs and per-patient cost for both the fixed and variable models. Differences between clinical site and core center expenditures were also calculated. Results Using a variable-cost budget for clinical sites, funding was extended by no-cost extension from five to eight years. Randomizing sites tripled from 34 to 109. Of the 2,500 targeted sample size, 138 (5.5%) were randomized during the first five years and 1,387 (55.5%) during the no-cost extension. The actual per-patient costs of the variable model were 9% ($13,845) of the projected per-patient costs ($152,992) of the fixed model. Conclusions Performance-based budgets conserve funding, promote compliance, and allow for additional sites at modest additional cost. Costs of large-scale clinical trials can thus be reduced through effective management without compromising scientific integrity. PMID:24661748

Financial management of a large multisite randomized clinical trial.

PubMed

Sheffet, Alice J; Flaxman, Linda; Tom, MeeLee; Hughes, Susan E; Longbottom, Mary E; Howard, Virginia J; Marler, John R; Brott, Thomas G

2014-08-01

The Carotid Revascularization Endarterectomy versus Stenting Trial (CREST) received five years' funding ($21 112 866) from the National Institutes of Health to compare carotid stenting to surgery for stroke prevention in 2500 randomized participants at 40 sites. Herein we evaluate the change in the CREST budget from a fixed to variable-cost model and recommend strategies for the financial management of large-scale clinical trials. Projections of the original grant's fixed-cost model were compared to the actual costs of the revised variable-cost model. The original grant's fixed-cost budget included salaries, fringe benefits, and other direct and indirect costs. For the variable-cost model, the costs were actual payments to the clinical sites and core centers based upon actual trial enrollment. We compared annual direct and indirect costs and per-patient cost for both the fixed and variable models. Differences between clinical site and core center expenditures were also calculated. Using a variable-cost budget for clinical sites, funding was extended by no-cost extension from five to eight years. Randomizing sites tripled from 34 to 109. Of the 2500 targeted sample size, 138 (5·5%) were randomized during the first five years and 1387 (55·5%) during the no-cost extension. The actual per-patient costs of the variable model were 9% ($13 845) of the projected per-patient costs ($152 992) of the fixed model. Performance-based budgets conserve funding, promote compliance, and allow for additional sites at modest additional cost. Costs of large-scale clinical trials can thus be reduced through effective management without compromising scientific integrity. © 2014 The Authors. International Journal of Stroke © 2014 World Stroke Organization.

[Progress in developing and applying Streptomyces chassis - A review].

PubMed

Xiao, Liping; Deng, Zixin; Liu, Tiangang

2016-03-04

Natural products and their derivatives play an important role in modern healthcare. Their diversity in bioactivity and chemical structure inspires scientists to discover new drug entities for clinical use. However, chemical synthesis of natural compounds has insurmountable difficulties in technology and cost. Also, many original-producing bacteria have disadvantages of needing harsh cultivation conditions, having low productivity and other shortcomings. In addition, some gene clusters responsible for secondary metabolite biosynthesis are silence in the original strains. Therefore, it is of great significance to exploit strategy for the heterologous expression of natural products guided by synthetic biology. Recently, researchers pay more attention on using actinomycetes that are the main source of many secondary metabolites, such as antibiotics, anticancer agents, and immunosuppressive drugs. Especially, with huge development of genome sequencing, abundant resources of natural product biosynthesis in Streptomyces have been discovered, which highlight the special advantages on developing Streptomyces as the heterologous expression chassis cells. This review begins with the significance of the development of Streptomyces chassis, focusing on the strategies and the status in developing Streptomyces chassis cells, followed by examples to illustrate the practical applications of a variety of Streptomyces chassis.

Evaluation of Cytoreductive Surgery and Hyperthermic Intraperitoneal Chemotherapy for Peritoneal Carcinomatosis of Colorectal Origin in the Era of Value-Based Medicine.

PubMed

Vanounou, Tsafrir; Garfinkle, Richard

2016-08-01

Peritoneal spread from colorectal cancer is second only to the liver as a site for metastasis. Cytoreductive surgery and hyperthermic intraperitoneal chemotherapy (CRS-HIPEC) is a well-established treatment option for patients with peritoneal carcinomatosis (PC) of colorectal origin. However, due to concerns regarding both its clinical benefit and high cost, its universal adoption as the standard of care for patients with limited peritoneal dissemination has been slow. The purpose of this review was to clarify the clinical utility and cost effectiveness of CRS-HIPEC in the treatment of colorectal PC using the framework of value-based medicine, which attempts to combine both benefit and cost into a single quantifiable metric. Our comprehensive review of the clinical outcomes and cost effectiveness of CRS-HIPEC demonstrate that it is a highly valuable oncologic therapy and a good use of healthcare resources.

A hierarchical storage management (HSM) scheme for cost-effective on-line archival using lossy compression.

PubMed

Avrin, D E; Andriole, K P; Yin, L; Gould, R G; Arenson, R L

2001-03-01

A hierarchical storage management (HSM) scheme for cost-effective on-line archival of image data using lossy compression is described. This HSM scheme also provides an off-site tape backup mechanism and disaster recovery. The full-resolution image data are viewed originally for primary diagnosis, then losslessly compressed and sent off site to a tape backup archive. In addition, the original data are wavelet lossy compressed (at approximately 25:1 for computed radiography, 10:1 for computed tomography, and 5:1 for magnetic resonance) and stored on a large RAID device for maximum cost-effective, on-line storage and immediate retrieval of images for review and comparison. This HSM scheme provides a solution to 4 problems in image archiving, namely cost-effective on-line storage, disaster recovery of data, off-site tape backup for the legal record, and maximum intermediate storage and retrieval through the use of on-site lossy compression.

Environmental pollutants and disease in American children: estimates of morbidity, mortality, and costs for lead poisoning, asthma, cancer, and developmental disabilities.

PubMed Central

Landrigan, Philip J; Schechter, Clyde B; Lipton, Jeffrey M; Fahs, Marianne C; Schwartz, Joel

2002-01-01

In this study, we aimed to estimate the contribution of environmental pollutants to the incidence, prevalence, mortality, and costs of pediatric disease in American children. We examined four categories of illness: lead poisoning, asthma, cancer, and neurobehavioral disorders. To estimate the proportion of each attributable to toxins in the environment, we used an environmentally attributable fraction (EAF) model. EAFs for lead poisoning, asthma, and cancer were developed by panels of experts through a Delphi process, whereas that for neurobehavioral disorders was based on data from the National Academy of Sciences. We define environmental pollutants as toxic chemicals of human origin in air, food, water, and communities. To develop estimates of costs, we relied on data from the U.S. Environmental Protection Agency, Centers for Disease Control and Prevention, National Center for Health Statistics, the Bureau of Labor Statistics, the Health Care Financing Agency, and the Practice Management Information Corporation. EAFs were judged to be 100% for lead poisoning, 30% for asthma (range, 10-35%), 5% for cancer (range, 2-10%), and 10% for neurobehavioral disorders (range, 5-20%). Total annual costs are estimated to be $54.9 billion (range $48.8-64.8 billion): $43.4 billion for lead poisoning, $2.0 billion for asthma, $0.3 billion for childhood cancer, and $9.2 billion for neurobehavioral disorders. This sum amounts to 2.8 percent of total U.S. health care costs. This estimate is likely low because it considers only four categories of illness, incorporates conservative assumptions, ignores costs of pain and suffering, and does not include late complications for which etiologic associations are poorly quantified. The costs of pediatric environmental disease are high, in contrast with the limited resources directed to research, tracking, and prevention. PMID:12117650

Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

NASA Astrophysics Data System (ADS)

Sirirojvisuth, Apinut

In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this concept, the additional manufacturing knowledge can be used to identify a more accurate lifecycle cost and facilitate higher fidelity tradeoffs during conceptual and preliminary design. Advanced Composite Cost Estimating Model (ACCEM) is employed as a process-based cost component to replace the original TCM result of the composite part production cost. The reason for the replacement is that TCM estimates production costs from part weights as a result of subtractive manufacturing of metallic origin such as casting, forging, and machining processes. A complexity factor can sometimes be adjusted to reflect different types of metal and machine settings. The TCM assumption, however, gives erroneous results when applied to additive processes like those of composite manufacturing. Another innovative aspect of this research is the introduction of a work measurement technique called Maynard Operation Sequence Technique (MOST) to be used, similarly to Activity-Based Costing (ABC) approach, to estimate manufacturing time of a part by virtue of breaking down the operations occurred during its production. ABC allows a realistic determination of cost incurred in each activity, as opposed to using a traditional method of time estimation by analogy or using response surface equations from historical process data. The MOST concept provides a tailored study of an individual process typically required for a new, innovative design. Nevertheless, the MOST idea has some challenges, one of which is its requirement to build a new process from ground up. The process development requires a Subject Matter Expertise (SME) in manufacturing method of the particular design. The SME must have also a comprehensive understanding of the MOST system so that the correct parameters are chosen. In practice, these knowledge requirements may demand people from outside of the design discipline and a priori training of MOST. To relieve the constraint, this study includes an entirely new sub-system architecture that comprises 1) a knowledge-based system to provide the required knowledge during the process selection; and 2) a new user-interface to guide the parameter selection when building the process using MOST. Also included in this study is the demonstration of how the HLCET and its constituents can be integrated with a Georgia Tech' Integrated Product and Process Development (IPPD) methodology. The applicability of this work will be shown through a complex aerospace design example to gain insights into how manufacturing knowledge helps make better design decisions during the early stages. The setup process is explained with an example of its utility demonstrated in a hypothetical fighter aircraft wing redesign. The evaluation of the system effectiveness against existing methodologies is illustrated to conclude the thesis.

A lifetime Markov model for the economic evaluation of chronic obstructive pulmonary disease.

PubMed

Menn, Petra; Leidl, Reiner; Holle, Rolf

2012-09-01

Chronic obstructive pulmonary disease (COPD) is currently the fourth leading cause of death worldwide. It has serious health effects and causes substantial costs for society. The aim of the present paper was to develop a state-of-the-art decision-analytic model of COPD whereby the cost effectiveness of interventions in Germany can be estimated. To demonstrate the applicability of the model, a smoking cessation programme was evaluated against usual care. A seven-stage Markov model (disease stages I to IV according to the GOLD [Global Initiative for Chronic Obstructive Lung Disease] classification, states after lung-volume reduction surgery and lung transplantation, death) was developed to conduct a cost-utility analysis from the societal perspective over a time horizon of 10, 40 and 60 years. Patients entered the cohort model at the age of 45 with mild COPD. Exacerbations were classified into three levels: mild, moderate and severe. Estimation of stage-specific probabilities (for smokers and quitters), utilities and costs was based on German data where possible. Data on effectiveness of the intervention was retrieved from the literature. A discount rate of 3% was applied to costs and effects. Probabilistic sensitivity analysis was used to assess the robustness of the results. The smoking cessation programme was the dominant strategy compared with usual care, and the intervention resulted in an increase in health effects of 0.54 QALYs and a cost reduction of &U20AC;1115 per patient (year 2007 prices) after 60 years. In the probabilistic analysis, the intervention dominated in about 95% of the simulations. Sensitivity analyses showed that uncertainty primarily originated from data on disease progression and treatment cost in the early stages of disease. The model developed allows the long-term cost effectiveness of interventions to be estimated, and has been adapted to Germany. The model suggests that the smoking cessation programme evaluated was more effective than usual care as well as being cost-saving. Most patients had mild or moderate COPD, stages for which parameter uncertainty was found to be high. This raises the need to improve data on the early stages of COPD.

Compact and low-cost fiber optic thermometer

NASA Astrophysics Data System (ADS)

Sun, Mei H.

1997-06-01

Commercial fiberoptic thermometers have been available for a number of years. The early products were unreliable and high in price. However, the continuing effort in the development of new sensing techniques along with the breakthroughs made in many areas of optoelectronics in recent years have made the production of cost competitive and reliable systems feasible. A fluorescence decay time based system has been demonstrated to successfully meet both cost and performance requirements for various medical applications. A very critical element to the success of this low cost and compact fiberoptic thermometer is the fluorescent sensor material. The very high quantum efficiency, the operating wavelengths, and the temperature sensitivity helped significantly in simplifying the design requirements for the optics and the electronics. The one to eight channel unit contains one to eight modules of a simple optical assembly: an LED light source, a small lens, and a filter are housed in an injection molded plastic container. Both the electronics and the optics reside on a small printed circuit board of approximately 6 inches by 3 inches. This system can be packaged as a stand alone unit or embedded in original manufacturer equipment.

Cost-Effectiveness of a New Nordic Diet as a Strategy for Health Promotion

PubMed Central

Jensen, Jørgen Dejgård; Saxe, Henrik; Denver, Sigrid

2015-01-01

Inappropriate diets constitute an important health risk and an increasing environmental burden. Healthy regional diets may contribute to meeting this dual challenge. A palatable, healthy and sustainable New Nordic diet (NND) based on organic products from the Nordic region has been developed. This study assesses whether a large-scale introduction of NND is a cost-effective health promotion strategy by combining an economic model for estimating the utility-maximizing composition of NND, a life cycle assessment model to assess environmental effects of the dietary change, and a health impact model to assess impacts on the disease burden. Consumer expenditure for food and beverages in the NND is about 16% higher than currently, with the largest relative difference in low-income households. Environmental loads from food consumption are 15%–25% lower, and more than 18,000 disability-adjusted life years (DALY) will be saved per year in Denmark. NND exhibits a cost-effectiveness ratio of about €73,000–94,000 per DALY saved. This cost-effectiveness improves considerably, if the NND’s emphasis on organic and Nordic-origin products is relaxed. PMID:26133129

Cost-Effectiveness of a New Nordic Diet as a Strategy for Health Promotion.

PubMed

Jensen, Jørgen Dejgård; Saxe, Henrik; Denver, Sigrid

2015-06-30

Inappropriate diets constitute an important health risk and an increasing environmental burden. Healthy regional diets may contribute to meeting this dual challenge. A palatable, healthy and sustainable New Nordic diet (NND) based on organic products from the Nordic region has been developed. This study assesses whether a large-scale introduction of NND is a cost-effective health promotion strategy by combining an economic model for estimating the utility-maximizing composition of NND, a life cycle assessment model to assess environmental effects of the dietary change, and a health impact model to assess impacts on the disease burden. Consumer expenditure for food and beverages in the NND is about 16% higher than currently, with the largest relative difference in low-income households. Environmental loads from food consumption are 15%-25% lower, and more than 18,000 disability-adjusted life years (DALY) will be saved per year in Denmark. NND exhibits a cost-effectiveness ratio of about €73,000-94,000 per DALY saved. This cost-effectiveness improves considerably, if the NND's emphasis on organic and Nordic-origin products is relaxed.

Dabhol resumes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burr, M.T.

1997-01-01

Shockwaves were felt throughout the global business community when political forces in India stalled out the Dabhol power project. Lenders and investors felt even less secure about the risks involved with developing infrastructure projects in emerging economies, and Dabhol came to symbolize the sinkholes that lie in wait for even the best-devised projects with the strongest sponsors. The project resumed in early December, however, after the Bombay High Court dismissed the only remaining lawsuit filed against Dabhol Power Co. Now, the Dabhol project is set to become an example of how a project can succeed in a big way ifmore » it has developers with integrity, skill, flexibility, and--above all--a great deal of patience. Originally a 695 MW facility, Dabhol was renegotiated so the complex totals 2,450 MW, with one 740 MW phase and another 1,710 MW phase. {open_quotes}The additional capacity allowed us to recover the costs we incurred during cancellation,{close_quotes} says Rebecca Mark, CEO of Enron Development Corp. in Houston, Texas. {open_quotes}We reduced rates for the second phase, and we`ll handle it on a competitive basis when it comes to specifying equipment.{close_quotes} Enron is the lead developer of the project, with an 80 percent equity stake. GE Capital of Stamford, Conn., USA, and Bechtel Enterprises of San Francisco, Calif., each hold a 10 percent share in the project. {open_quotes}The changes in the project have had little effect on the financing arrangements. Additional project costs which resulted from the delays were funded by the equity group, and the debt levels and terms remain consistent with those of the original closing,{close_quotes} says Everett Smith III, executive vice president and director-international, for GE Capital Services Structured Finance Group.« less

11 CFR 9008.10 - Documentation of disbursements; net outstanding convention expenses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... convention; plus (iii) An estimate of necessary winding down costs; less (2) The total of: (i) Cash on hand... of how the lesser amount or full write-off was determined. (7) Winding down costs. The term winding... value of capital assets may be considered to be the total original cost of such items when acquired less...

11 CFR 9008.10 - Documentation of disbursements; net outstanding convention expenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... convention; plus (iii) An estimate of necessary winding down costs; less (2) The total of: (i) Cash on hand... of how the lesser amount or full write-off was determined. (7) Winding down costs. The term winding... value of capital assets may be considered to be the total original cost of such items when acquired less...

11 CFR 9008.10 - Documentation of disbursements; net outstanding convention expenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... convention; plus (iii) An estimate of necessary winding down costs; less (2) The total of: (i) Cash on hand... of how the lesser amount or full write-off was determined. (7) Winding down costs. The term winding... value of capital assets may be considered to be the total original cost of such items when acquired less...

11 CFR 9008.10 - Documentation of disbursements; net outstanding convention expenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... convention; plus (iii) An estimate of necessary winding down costs; less (2) The total of: (i) Cash on hand... of how the lesser amount or full write-off was determined. (7) Winding down costs. The term winding... value of capital assets may be considered to be the total original cost of such items when acquired less...

High medicine prices and poor affordability.

PubMed

Suh, Guk-Hee

2011-07-01

In developing countries, most people who need medicines have to pay for them out of their own pockets. This review focuses on publications to explore the affordability gap of medicines and ways to close it. Cardiovascular medicines were unaffordable in low-income to middle-income countries, whereas dementia medicines were only affordable in regions of wealth. In urban Mozambique, local mark-ups are up to two-thirds of final price in private pharmacies, whereas some governments consistently paid higher prices above the international reference prices to procure a number of medicines. Generics competition from India made an originator brand manufacturer of a AIDS drug willing to supply the drug at a cheaper rate to poorer countries, whereas a Brazilian national program to produce nonprofit generics against protected patent of originator brand products to provide free AIDS drugs had cut the number of people dying by half and hospitalization by 80%, which saved about half a billion US dollars, making the program almost fund itself. Although lowering the manufacturer's price has a greater effect on the cost, policies to eliminate duties and taxes on medicines and regulate mark-ups are practical strategies to avoid excessive add-on costs.

Towards automatic planning for manufacturing generative processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

CALTON,TERRI L.

2000-05-24

Generative process planning describes methods process engineers use to modify manufacturing/process plans after designs are complete. A completed design may be the result from the introduction of a new product based on an old design, an assembly upgrade, or modified product designs used for a family of similar products. An engineer designs an assembly and then creates plans capturing manufacturing processes, including assembly sequences, component joining methods, part costs, labor costs, etc. When new products originate as a result of an upgrade, component geometry may change, and/or additional components and subassemblies may be added to or are omitted from themore » original design. As a result process engineers are forced to create new plans. This is further complicated by the fact that the process engineer is forced to manually generate these plans for each product upgrade. To generate new assembly plans for product upgrades, engineers must manually re-specify the manufacturing plan selection criteria and re-run the planners. To remedy this problem, special-purpose assembly planning algorithms have been developed to automatically recognize design modifications and automatically apply previously defined manufacturing plan selection criteria and constraints.« less

Can CH-53K 3D Technical Data Support the Provisioning Process

DTIC Science & Technology

2017-05-01

contain the minimum required data characteristics and elements (Appendix A) and (2) are fully anno - tated, they can be converted to 3D PDF files that...were anno - tated as part of the original model development/creation process, the time to perform an annotation would be about 50 percent (about 1.5...files, after the fact. If the models had been anno - tated at the time they were created, we estimate that the cost to implement a 3D PDF solution for

Predicting Schedule Duration for Defense Acquisition Programs: Program Initiation to Initial Operational Capability

DTIC Science & Technology

2016-03-24

Corporation found that increases in schedule effort tend to be the reason for increases in the cost of acquiring a new weapons system due to, at a minimum...in-depth finance and schedule data for selected programs (Brown et al., 2015). We also give extra focus on Research Development Test & Evaluation...we create and employ an entirely new database. The database we utilize for our research is a database originally built by the RAND Corporation for

A CLIPS expert system for maximizing alfalfa (Medicago Sativa L.) production

NASA Technical Reports Server (NTRS)

Engel, B. A.; Jones, D. D.; Rhykerd, R. L.; Rhykerd, L. M.; Rhykerd, C. L., Jr.; Rhykerd, C. L.

1990-01-01

An alfalfa management expert system originally developed by Purdue University agricultural scientists on the PC Plus expert system shell from Texas Instrument has been updated and successfully converted to CLIPS (C Language Integrated Production System). This reduces the cost and legal restrictions associated with making the expert system available to agribusiness industries, extension personnel and farm managers and operators. The expert system includes recommendations concerning soil drainage, liming, P and K fertilization, weed control, variety selection and seeding rate including pure live seeds.

KSC-2013-1049

NASA Image and Video Library

2013-01-09

CAPE CANAVERAL, Fla. -- At a news conference NASA officials and industry partners discuss progress of the agency's Commercial Crew Program. Among those participating in the briefing is Rob Meyerson, Blue Origin president and program manager. Through CCP, NASA is facilitating the development of U.S. commercial crew space transportation capabilities to achieve safe, reliable and cost-effective access to and from low-Earth orbit for potential future government and commercial customers. For more information, visit http://www.nasa.gov/commercialcrew Photo credit: NASA/Kim Shiflett

Global ring satellite communications system for future broadband network

NASA Astrophysics Data System (ADS)

Iida, Takashi; Suzuki, Yoshiaki; Arimoto, Yoshinori; Akaishi, Akira

2005-04-01

The purpose of this paper is to examine a cost model of a global ring satellite communications system as a 2G-satellite (second generation Internet satellite) for the future Internet satellite, whose capacity is around 120 Gbps. The authors proposed the future needs of research and development of communications satellite for the next 30 years and also proposed the approach of three generations for the future Internet satellites. First, the paper reviews and updates the original proposal for the future needs of communications satellite, considering the recent development of the quantum communication technology. It also examines the communications satellite applicability for bridging the digital divide in the Asia-Oceania as an example. The paper clarifies this possibility of communications satellite by showing various relationships among Internet penetration, land area, population growth, etc. Second, the cost of the global ring satellite is examined. The user terminal is considered as a combination of an earth terminal and wireless local area network for a user community. This paper shows that the global ring satellite has a possibility of a good cost-competitiveness to the terrestrial system because of the global communications system can be configured only by satellite system.

Presenting evidence and summary measures to best inform societal decisions when comparing multiple strategies.

PubMed

Eckermann, Simon; Willan, Andrew R

2011-07-01

Multiple strategy comparisons in health technology assessment (HTA) are becoming increasingly important, with multiple alternative therapeutic actions, combinations of therapies and diagnostic and genetic testing alternatives. Comparison under uncertainty of incremental cost, effects and cost effectiveness across more than two strategies is conceptually and practically very different from that for two strategies, where all evidence can be summarized in a single bivariate distribution on the incremental cost-effectiveness plane. Alternative methods for comparing multiple strategies in HTA have been developed in (i) presenting cost and effects on the cost-disutility plane and (ii) summarizing evidence with multiple strategy cost-effectiveness acceptability (CEA) and expected net loss (ENL) curves and frontiers. However, critical questions remain for the analyst and decision maker of how these techniques can be best employed across multiple strategies to (i) inform clinical and cost inference in presenting evidence, and (ii) summarize evidence of cost effectiveness to inform societal reimbursement decisions where preferences may be risk neutral or somewhat risk averse under the Arrow-Lind theorem. We critically consider how evidence across multiple strategies can be best presented and summarized to inform inference and societal reimbursement decisions, given currently available methods. In the process, we make a number of important original findings. First, in presenting evidence for multiple strategies, the joint distribution of costs and effects on the cost-disutility plane with associated flexible comparators varying across replicates for cost and effect axes ensure full cost and effect inference. Such inference is usually confounded on the cost-effectiveness plane with comparison relative to a fixed origin and axes. Second, in summarizing evidence for risk-neutral societal decision making, ENL curves and frontiers are shown to have advantages over the CEA frontier in directly presenting differences in expected net benefit (ENB). The CEA frontier, while identifying strategies that maximize ENB, only presents their probability of maximizing net benefit (NB) and, hence, fails to explain why strategies maximize ENB at any given threshold value. Third, in summarizing evidence for somewhat risk-averse societal decision making, trade-offs between the strategy maximizing ENB and other potentially optimal strategies with higher probability of maximizing NB should be presented over discrete threshold values where they arise. However, the probabilities informing these trade-offs and associated discrete threshold value regions should be derived from bilateral CEA curves to prevent confounding by other strategies inherent in multiple strategy CEA curves. Based on these findings, a series of recommendations are made for best presenting and summarizing cost-effectiveness evidence for reimbursement decisions when comparing multiple strategies, which are contrasted with advice for comparing two strategies. Implications for joint research and reimbursement decisions are also discussed.

Parallel imports and the pricing of pharmaceutical products: evidence from the European Union.

PubMed

Ganslandt, Mattias; Maskus, Keith E

2004-09-01

We consider policy issues regarding parallel imports (PIs) of brand-name pharmaceuticals in the European Union, where such trade is permitted. We develop a simple model in which an original manufacturer competes in its home market with PI firms. The model suggests that for small trade costs the original manufacturer will accommodate the import decisions of parallel traders and that the price in the home market falls as the volume of parallel imports rises. Using data from Sweden we find that the prices of drugs subject to competition from parallel imports fell relative to other drugs over the period 1994-1999. Econometric analysis finds that parallel imports significantly reduced manufacturing prices, by 12-19%. There is evidence that this effect increases with multiple PI entrants.

Molecular diagnostics for low resource settings

NASA Astrophysics Data System (ADS)

Weigl, Bernhard H.

2010-03-01

As traditional high quality diagnostic laboratories are not widely available or affordable in developing country health care settings, microfluidics-based point-of-care diagnostics may be able to address the need to perform complex assays in under-resourced areas. Many instrument-based as well as non-instrumented microfluidic prototype diagnostics are currently being developed. In addition to various engineering challenges, the greatest remaining issue is the search for truly low-cost disposable manufacturing methods. Diagnostics for global health, and specifically microfluidics and molecular-based low resource diagnostics, have become a very active research area over the last five years, thanks in part to new funding that became available from the Bill and Melinda Gates Foundation, the National Institutes of Health, and other sources. This has led to a number of interesting prototype devices that are now in advanced development or clinical validation. These devices include disposables and instruments that perform multiplexed PCR-based lab-on-a-chips for enteric, febrile, and vaginal diseases, as well as immunoassays for diseases such as malaria, HIV, and various sexually transmitted diseases. More recently, instrument-free diagnostic disposables based on isothermal nucleic acid amplification have been developed as well. Regardless of platform, however, the search for truly low-cost manufacturing methods that would result in cost of goods per disposable of around US1/unit at volume remains a big challenge. This talk will give an overview over existing platform development efforts as well as present some original research in this area at PATH.

The learning curve and the cost of heart transplantation.

PubMed

Woods, J R; Saywell, R M; Nyhuis, A W; Jay, S J; Lohrman, R G; Halbrook, H G

1992-06-01

The effect of learning on hospital outcomes such as mortality or adverse events (the so-called "practice makes perfect" hypothesis) has been studied by numerous investigators. The effect of learning on hospital cost, however, has received much less attention. This article reports the results of a multiple regression model demonstrating a nonlinear, decreasing trend in operative and postoperative hospital costs over time in a consecutive series of 71 heart transplant patients, all treated in the same institution. The cost trend is shown to persist even after controlling for various preoperative demographic and clinical risk factors and the specific experience of individual surgeons. Using a reference case, the model predicts a cost of $81,297 for the first heart transplant procedure performed at the hospital. If this same patient had been the tenth case rather than the first, with the hospital having benefited from the experience gained in nine previous cases, the model predicts the cost would now be only $48,431, or approximately 60 percent of the cost of the first case. Had this patient been the twenty-fifth case, the predicted cost would be $35,352 (43 percent of the original cost), and had this been the fiftieth case, the cost would be $25,458 (31 percent of the original cost). The longitudinal study design used in this analysis greatly reduces the likelihood that the observed cost reduction is due to economies of scale rather than learning. The results have implications for a policy of regionalization as a tactic for containing hospital cost. Whereas others have pointed to a volume-cost relationship as an argument for the regionalization of expensive and complex hospital procedures, the present data isolate a learning-cost relationship as a separate argument for regionalization.

Approaches to capturing the financial cost of family care-giving within a palliative care context: a systematic review.

PubMed

Gardiner, Clare; Brereton, Louise; Frey, Rosemary; Wilkinson-Meyers, Laura; Gott, Merryn

2016-09-01

The economic burden faced by family caregivers of people at the end of life is well recognised. Financial burden has a significant impact on the provision of family care-giving in the community setting, but has seen limited research attention. A systematic review with realist review synthesis and thematic analysis was undertaken to identify literature relating to the financial costs and impact of family care-giving at the end of life. This paper reports findings relating to previously developed approaches which capture the financial costs and implications of caring for family members receiving palliative/end-of-life care. Seven electronic databases were searched from inception to April 2012, for original research studies relating to the financial impact of care-giving at the end of life. Studies were independently screened to identify those which met the study inclusion criteria, and the methodological quality of included studies was appraised using realist review criteria of relevance and rigour. A descriptive thematic approach was used to synthesise data. Twelve articles met the inclusion criteria for the review. Various approaches to capturing data on the financial costs of care-giving at the end of life were noted; however, no single tool was identified with the sole purpose of exploring these costs. The majority of approaches used structured questionnaires and were administered by personal interview, with most studies using longitudinal designs. Calculation of costs was most often based on recall by patients and family caregivers, in some studies combined with objective measures of resource use. While the studies in this review provide useful data on approaches to capturing costs of care-giving, more work is needed to develop methods which accurately and sensitively capture the financial costs of caring at the end of life. Methodological considerations include study design and method of administration, contextual and cultural relevance, and accuracy of cost estimates. © 2015 John Wiley & Sons Ltd.

A multivariate and stochastic approach to identify key variables to rank dairy farms on profitability.

PubMed

Atzori, A S; Tedeschi, L O; Cannas, A

2013-05-01

The economic efficiency of dairy farms is the main goal of farmers. The objective of this work was to use routinely available information at the dairy farm level to develop an index of profitability to rank dairy farms and to assist the decision-making process of farmers to increase the economic efficiency of the entire system. A stochastic modeling approach was used to study the relationships between inputs and profitability (i.e., income over feed cost; IOFC) of dairy cattle farms. The IOFC was calculated as: milk revenue + value of male calves + culling revenue - herd feed costs. Two databases were created. The first one was a development database, which was created from technical and economic variables collected in 135 dairy farms. The second one was a synthetic database (sDB) created from 5,000 synthetic dairy farms using the Monte Carlo technique and based on the characteristics of the development database data. The sDB was used to develop a ranking index as follows: (1) principal component analysis (PCA), excluding IOFC, was used to identify principal components (sPC); and (2) coefficient estimates of a multiple regression of the IOFC on the sPC were obtained. Then, the eigenvectors of the sPC were used to compute the principal component values for the original 135 dairy farms that were used with the multiple regression coefficient estimates to predict IOFC (dRI; ranking index from development database). The dRI was used to rank the original 135 dairy farms. The PCA explained 77.6% of the sDB variability and 4 sPC were selected. The sPC were associated with herd profile, milk quality and payment, poor management, and reproduction based on the significant variables of the sPC. The mean IOFC in the sDB was 0.1377 ± 0.0162 euros per liter of milk (€/L). The dRI explained 81% of the variability of the IOFC calculated for the 135 original farms. When the number of farms below and above 1 standard deviation (SD) of the dRI were calculated, we found that 21 farms had dRI<-1 SD, 32 farms were between -1 SD and 0, 67 farms were between 0 and +1 SD, and 15 farms had dRI>+1 SD. The top 10% of the farms had a dRI greater than 0.170 €/L, whereas the bottom 10% farms had a dRI lower than 0.116 €/L. This stochastic approach allowed us to understand the relationships among the inputs of the studied dairy farms and to develop a ranking index for comparison purposes. The developed methodology may be improved by using more inputs at the dairy farm level and considering the actual cost to measure profitability. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[The organizational benefits of the Kaizen approach at the Centre Hospitalier Universitaire de Sherbrooke (CHUS)].

PubMed

Comtois, Jonathan; Paris, Yvon; Poder, Thomas G; Chaussé, Sylvain

2013-01-01

The purpose of this study was to calculate the cost savings associated with using the kaizen approach in our hospital. Originally developed in Japan, the kaizen approach, based on the idea of continuous improvement, has considerable support in North America, including in the Quebec health care system. This study assessed the first fifteen kaizen projects at the CHUS. Based on an economic evaluation, we showed that using the kaizen approach can result in substantial cost savings. The success of the kaizen approach requires compliance with specific prerequisites. The future of the approach will depend on our ability to comply with these prerequisites. More specifically, such compliance will determine whether the approach is merely a passing fad or a strategy for improving our management style to promote greater efficiency.

Integrated Campaign Probabilistic Cost, Schedule, Performance, and Value for Program Office Support

NASA Technical Reports Server (NTRS)

Cornelius, David; Sasamoto, Washito; Daugherty, Kevin; Deacon, Shaun

2012-01-01

This paper describes an integrated assessment tool developed at NASA Langley Research Center that incorporates probabilistic analysis of life cycle cost, schedule, launch performance, on-orbit performance, and value across a series of planned space-based missions, or campaign. Originally designed as an aid in planning the execution of missions to accomplish the National Research Council 2007 Earth Science Decadal Survey, it utilizes Monte Carlo simulation of a series of space missions for assessment of resource requirements and expected return on investment. Interactions between simulated missions are incorporated, such as competition for launch site manifest, to capture unexpected and non-linear system behaviors. A novel value model is utilized to provide an assessment of the probabilistic return on investment. A demonstration case is discussed to illustrate the tool utility.

Tankless Water Heater

NASA Technical Reports Server (NTRS)

1997-01-01

Kennedy Space Center specialists aided Space, Energy, Time Saving (SETS) Systems, Inc. in working out the problems they encountered with their new electronic "tankless" water heater. The flow switch design suffered intermittent problems. Hiring several testing and engineering firms produced only graphs, printouts, and a large expense, but no solutions. Then through the Kennedy Space Center/State of Florida Technology Outreach Program, SETS was referred to Michael Brooks, a 21-year space program veteran and flowmeter expert. Run throughout Florida to provide technical service to businesses at no cost, the program applies scientific and engineering expertise originally developed for space applications to the Florida business community. Brooks discovered several key problems, resulting in a new design that turned out to be simpler, yielding a 63 percent reduction in labor and material costs over the old design.

Doctors commitment and long-term effectiveness for cost containment policies: lesson learned from biosimilar drugs.

PubMed

Menditto, Enrica; Orlando, Valentina; Coretti, Silvia; Putignano, Daria; Fiorentino, Denise; Ruggeri, Matteo

2015-01-01

Agency is a pervasive feature of the health care market, with doctors acting as agents for both patients and the health care system. In a context of scarce resources, doctors are required to take opportunity cost into account when prescribing treatments, while cost containment policies cannot overlook their active role in determining health care resource allocation. This paper addresses this issue, investigating the effects of cost containment measures in the market of biosimilar drugs that represent a viable and cost-saving strategy for the reduction of health care expenditure. The analysis focuses on a particular region in Italy, where several timely policies to incentivize biosimilar prescribing were launched. Drugs were identified by the anatomical therapeutic chemical classification system. Information about biosimilar drugs and their originator biological products was extracted from the IMS Health regional database. Drug consumption was expressed in terms of counting units, while expenditure was evaluated in Euro (€). The market penetration of biosimilars was analyzed by year and quarterly. In the Campania region of Italy, the effects of cost containment policies, launched between 2009 and 2013, showed the prescription of biosimilars strongly increasing in 2010 until prescribing levels reached and exceeded the market share of the reference biological products in 2012. After a slight reduction, a plateau was observed at the beginning of 2013. At the same time, the use of the originator products had been decreasing until the first quarter of 2011. However, after a 1-year plateau, this trend was reversed, with a new increase in the consumption of the originators observed. Results show that the cost containment policies, applied to cut health expenditure "to cure and not to care", did not produce the cultural change necessary to make these policies effective in the long run. Therefore, top-down policies for cost containment are not successful; rather, a bottom-up approach based on consensus among professionals should become the preferred option.

A Framework for the Texas Highway Cost Allocation Study

DOT National Transportation Integrated Search

2001-01-01

Original Report Date: January 2000/Revised: June 2000. In fiscal year 1998, Texas spent $2.8 billion on the state-maintained road network, which includes the Interstate highways. This project estimates the contribution to these costs of different veh...

National Airspace System : status of FAA's Standard Terminal Automation Replacement System

DOT National Transportation Integrated Search

2002-09-01

Comparing the currently projected cost and deployment schedule for : STARS with the original cost and schedule is difficult because the program : presently bears little resemblance to the program envisioned in 1996. At : that time, FAA contracted wit...

THE MASTER PROTOCOL CONCEPT

PubMed Central

Allegra, Carmen J.

2015-01-01

During the past decade, biomedical technologies have undergone an explosive evolution---from the publication of the first complete human genome in 2003, after more than a decade of effort and at a cost of hundreds of millions of dollars---to the present time, where a complete genomic sequence can be available in less than a day and at a small fraction of the cost of the original sequence. The widespread availability of next generation genomic sequencing has opened the door to the development of precision oncology. The need to test multiple new targeted agents both alone and in combination with other targeted therapies, as well as classic cytotoxic agents, demand the development of novel therapeutic platforms (particularly Master Protocols) capable of efficiently and effectively testing multiple targeted agents or targeted therapeutic strategies in relatively small patient subpopulations. Here, we describe the Master Protocol concept, with a focus on the expected gains and complexities of the use of this design. An overview of Master Protocols currently active or in development is provided along with a more extensive discussion of the Lung Master Protocol (Lung-MAP study). PMID:26433553

78 FR 79419 - Energy Conservation Program for Consumer Products and Commercial and Industrial Equipment: Effect...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-30

... National Economic Benefits and Costs of Proposed Metal Halide Lamp Fixture Energy Conservation Standards \\4\\ Present value Discount rate Category (million 2012$) (percent) Benefits Operating Cost Savings 1,848 7 3... (at 45 7 $2,639/ton) 91 3 Total Benefits [dagger] 3,406 7 5,352 3 Using Original May 2013 Social Cost...

SUMMARY OF ELECTRIC SERVICE COSTS FOR TOTALLY AIR CONDITIONED SCHOOLS PREPARED FOR HOUSTON INDEPENDENT SCHOOL DISTRICT, MAY 31, 1967.

ERIC Educational Resources Information Center

WHITESIDES, M.M.

THIS REPORT IS A COMPILATION OF DATA ON ELECTRIC AIR CONDITIONING COSTS, OPERATIONS AND MAINTENANCE. AIR CONDITIONING UNITS ARE COMPARED IN TERMS OF ELECTRIC VERSUS NON-ELECTRIC, AUTOMATIC VERSUS OPERATED, AIR COOLED VERSUS WATER COOLED, RECIPROCATING VERSUS CENTRIFUGAL COMPRESSORS, SPACE AND NOISE, REHEAT, MAINTENANCE AND ORIGINAL COST. DATA ARE…

Evaluating the translation process of an Internet-based self-help intervention for prevention of depression: a cost-effectiveness analysis.

PubMed

Lintvedt, Ove K; Griffiths, Kathleen M; Eisemann, Martin; Waterloo, Knut

2013-01-23

Depression is common and treatable with cognitive behavior therapy (CBT), for example. However, access to this therapy is limited. Internet-based interventions have been found to be effective in reducing symptoms of depression. The International Society for Research on Internet Interventions has highlighted the importance of translating effective Internet programs into multiple languages to enable worldwide dissemination. The aim of the current study was to determine if it would be cost effective to translate an existing English-language Internet-based intervention for use in a non-English-speaking country. This paper reports an evaluation of a trial in which a research group in Norway translated two English-language Internet-based interventions into Norwegian (MoodGYM and BluePages) that had previously been shown to reduce symptoms of depression. The translation process and estimates of the cost-effectiveness of such a translation process is described. Estimated health effect was found by using quality-adjusted life years (QALY). Conservative estimates indicate that for every 1000 persons treated, 16 QALYs are gained. The investment is returned 9 times and the cost-effectiveness ratio (CER) is 3432. The costs of the translation project totaled to approximately 27% of the estimated original English-language version development costs. The economic analysis shows that the cost-effectiveness of the translation project was substantial. Hopefully, these results will encourage others to do similar analyses and report cost-effectiveness data in their research reports.

Evaluating the Translation Process of an Internet-Based Self-Help Intervention for Prevention of Depression: A Cost-Effectiveness Analysis

PubMed Central

2013-01-01

Background Depression is common and treatable with cognitive behavior therapy (CBT), for example. However, access to this therapy is limited. Internet-based interventions have been found to be effective in reducing symptoms of depression. The International Society for Research on Internet Interventions has highlighted the importance of translating effective Internet programs into multiple languages to enable worldwide dissemination. Objective The aim of the current study was to determine if it would be cost effective to translate an existing English-language Internet-based intervention for use in a non-English-speaking country. Methods This paper reports an evaluation of a trial in which a research group in Norway translated two English-language Internet-based interventions into Norwegian (MoodGYM and BluePages) that had previously been shown to reduce symptoms of depression. The translation process and estimates of the cost-effectiveness of such a translation process is described. Estimated health effect was found by using quality-adjusted life years (QALY). Results Conservative estimates indicate that for every 1000 persons treated, 16 QALYs are gained. The investment is returned 9 times and the cost-effectiveness ratio (CER) is 3432. The costs of the translation project totaled to approximately 27% of the estimated original English-language version development costs. Conclusions The economic analysis shows that the cost-effectiveness of the translation project was substantial. Hopefully, these results will encourage others to do similar analyses and report cost-effectiveness data in their research reports. PMID:23343481

The origins of SPECT and SPECT/CT.

PubMed

Hutton, Brian F

2014-05-01

Single photon emission computed tomography (SPECT) has a long history of development since its initial demonstration by Kuhl and Edwards in 1963. Although clinical utility has been dominated by the rotating gamma camera, there have been many technological innovations with the recent popularity of organ-specific dedicated SPECT systems. The combination of SPECT and CT evolved from early transmission techniques used for attenuation correction with the initial commercial systems predating the release of PET/CT. The development and acceptance of SPECT/CT has been relatively slow with continuing debate as to what cost/performance ratio is justified. Increasingly, fully diagnostic CT is combined with SPECT so as to facilitate optimal clinical utility.

North-South benefit sharing arrangements in bioprospecting and genetic research: a critical ethical and legal analysis.

PubMed

Schüklenk, Udo; Kleinsmidt, Anita

2006-12-01

Most pharmaceutical research carried out today is focused on the treatment and management of the lifestyle diseases of the developed world. Diseases that affect mainly poor people are neglected in research advancements in treatment because they cannot generate large financial returns on research and development costs. Benefit sharing arrangements for the use of indigenous resources and genetic research could only marginally address this gap in research and development in diseases that affect the poor. Benefit sharing as a strategy is conceptually problematic, even if one, as we do, agrees that impoverished indigenous communities should not be exploited and that they should be assisted in improving their living conditions. The accepted concept of intellectual property protection envisages clearly defined originators and owners of knowledge, whereas the concept of community membership is fluid and indigenous knowledge is, by its very nature, open, with the originator(s) lost in the mists of time. The delineation of 'community' presents serious conceptual and practical difficulties as few communities form discrete, easily discernable groups, and most have problematic leadership structures. Benefit sharing is no substitute for governments' responsibility to uplift impoverished communities. Benefit sharing arrangements may be fraught with difficulties but considerations of respect and equity demand that prior informed consent and consultation around commercialisation of knowledge take place with the source community and their government.

Measuring Access to Medicines: A Survey of Prices, Availability and Affordability in Shaanxi Province of China

PubMed Central

Jiang, Minghuan; Yang, Shimin; Yan, Kangkang; Liu, Jun; Zhao, Jun; Fang, Yu

2013-01-01

Objective To measure the prices and availability of selected medicines in Shaanxi Province after the implementation of new healthcare reform in 2009. Methods Data on the prices and availability of 47 medicines were collected from 50 public and 36 private sector medicine outlets in six regions of Shaanxi Province, Western China using a standardized methodology developed by the World Health Organization and Health Action International from September to October 2010. Medicine prices were compared with international reference prices to obtain a median price ratio. Affordability was measured as the number of days’ wages required for the lowest-paid unskilled government worker to purchase standard treatments for common conditions. Findings The mean availabilities of originator brands and lowest-priced generics were 8.9% and 26.5% in the public sector, and 18.1% and 43.6% in the private sector, respectively. The public sector procured generics and originator brands at median price ratios of 0.75 and 8.49, respectively, while patients paid 0.97 and 10.16. Final patient prices for lowest-priced generics and originator brands in the private sector were about 1.53 and 8.36 times their international retail prices, respectively. Public sector vendors applied high markups of 30.4% to generics, and 19.6% to originator brands. In the private sector, originator brands cost 390.7% more, on average, than their generic equivalents. Generic medicines were priced 17.3% higher in the private sector than the public sector. The lowest-paid government worker would need 0.1 day’s wages to purchase captopril for lowest-priced generics from private sector, while 6.6 days’ wages for losartan. For originator brands, the costs rise to 1.2 days’ wages for salbutamol inhaler and 15.6 days’ wages for omeprazole. Conclusions The prices, availability and affordability of medicines in China should be improved to ensure equitable access to basic medical treatments, especially for the poor. This requires multi-faceted interventions, as well as the review and refocusing of policies, regulations and educational interventions. PMID:23936471

Measuring access to medicines: a survey of prices, availability and affordability in Shaanxi province of China.

PubMed

Jiang, Minghuan; Yang, Shimin; Yan, Kangkang; Liu, Jun; Zhao, Jun; Fang, Yu

2013-01-01

To measure the prices and availability of selected medicines in Shaanxi Province after the implementation of new healthcare reform in 2009. Data on the prices and availability of 47 medicines were collected from 50 public and 36 private sector medicine outlets in six regions of Shaanxi Province, Western China using a standardized methodology developed by the World Health Organization and Health Action International from September to October 2010. Medicine prices were compared with international reference prices to obtain a median price ratio. Affordability was measured as the number of days' wages required for the lowest-paid unskilled government worker to purchase standard treatments for common conditions. The mean availabilities of originator brands and lowest-priced generics were 8.9% and 26.5% in the public sector, and 18.1% and 43.6% in the private sector, respectively. The public sector procured generics and originator brands at median price ratios of 0.75 and 8.49, respectively, while patients paid 0.97 and 10.16. Final patient prices for lowest-priced generics and originator brands in the private sector were about 1.53 and 8.36 times their international retail prices, respectively. Public sector vendors applied high markups of 30.4% to generics, and 19.6% to originator brands. In the private sector, originator brands cost 390.7% more, on average, than their generic equivalents. Generic medicines were priced 17.3% higher in the private sector than the public sector. The lowest-paid government worker would need 0.1 day's wages to purchase captopril for lowest-priced generics from private sector, while 6.6 days' wages for losartan. For originator brands, the costs rise to 1.2 days' wages for salbutamol inhaler and 15.6 days' wages for omeprazole. The prices, availability and affordability of medicines in China should be improved to ensure equitable access to basic medical treatments, especially for the poor. This requires multi-faceted interventions, as well as the review and refocusing of policies, regulations and educational interventions.

Application of Porter's generic strategies in ambulatory health care: a comparison of managerial perceptions in two Israeli sick funds.

PubMed

Torgovicky, Refael; Goldberg, Avishay; Shvarts, Shifra; Bar Dayan, Yosefa; Onn, Erez; Levi, Yehezkel; BarDayan, Yaron

2005-01-01

A number of typologies have been developed in the strategic management literature to categorize strategies that an organization can pursue at the business level. Extensive research has established Porter's generic strategies of (1) cost leadership, (2) differentiation, (3) differentiation focus, (4) cost focus, and (5) stuck-in-the-middle as the dominant paradigm in the literature. The purpose of the current study was to research competitive strategies in the Israeli ambulatory health care system, by comparing managerial perceptions of present and ideal business strategies in two Israeli sick funds. We developed a unique research tool, which reliably examines the gap between the present and ideal status managerial views. We found a relation between the business strategy and performance measures, thus strengthening Porter's original theory about the nonviability of the stuck-in-the-middle strategy, and suggesting the applicability Porter's generic strategies to not-for-profit institutes in an ambulatory health care system.

Perovskite Photovoltaics: The Path to a Printable Terawatt-Scale Technology

DOE PAGES

Berry, Joseph J.; van de Lagemaat, Jao; Al-Jassim, Mowafak M.; ...

2017-10-16

Abundant, low-cost, reliable, and clean energy is critical not just to maintain but also to improve the living conditions across the globe. Because of the world's unrelenting population and GDP growth that is only slightly offset by reductions in energy intensity per $ of GDP, it has been estimated that by 2050 the world will consume an average of 30 Terawatts (TW) of total (i.e., not just electricity) energy, of which, assuming no current generation capacity retires, at least between 10-15 TW will be completely new capacity. Addressing this 'Terawatt challenge', a term originally coined by Richard Smalley in 2004,more » in a nonpolluting and sustainable way is integral to addressing socioeconomic needs in both industrial and rapidly developing countries worldwide. In conjunction with ongoing electrification of the energy system, the vastness of the available solar resource will provide a solution to the world's energy needs if we can develop sufficiently low-cost, high-performance, and massively scalable photovoltaic (PV) technology.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, Joseph J.; van de Lagemaat, Jao; Al-Jassim, Mowafak M.

Abundant, low-cost, reliable, and clean energy is critical not just to maintain but also to improve the living conditions across the globe. Because of the world's unrelenting population and GDP growth that is only slightly offset by reductions in energy intensity per $ of GDP, it has been estimated that by 2050 the world will consume an average of 30 Terawatts (TW) of total (i.e., not just electricity) energy, of which, assuming no current generation capacity retires, at least between 10-15 TW will be completely new capacity. Addressing this 'Terawatt challenge', a term originally coined by Richard Smalley in 2004,more » in a nonpolluting and sustainable way is integral to addressing socioeconomic needs in both industrial and rapidly developing countries worldwide. In conjunction with ongoing electrification of the energy system, the vastness of the available solar resource will provide a solution to the world's energy needs if we can develop sufficiently low-cost, high-performance, and massively scalable photovoltaic (PV) technology.« less

Food Allergies: Novel Mechanisms and Therapeutic Perspectives.

PubMed

Di Costanzo, Margherita; Paparo, Lorella; Cosenza, Linda; Di Scala, Carmen; Nocerino, Rita; Aitoro, Rosita; Canani, Roberto Berni

2016-01-01

Childhood food allergy (FA) rates have rapidly increased with significant direct medical costs for the health care system and even larger costs for the families with a food-allergic child. The possible causes of food allergy become the target of intense scrutiny in recent years. Increasing evidence underline the importance in early life of gut microbiome in the development of allergic diseases. There are a range of factors in the modern environment that may be associated with changes to both the gut microbiome and risk of FA, such as mode of delivery, antibiotic exposure, infant feeding practices, farming environment, and country of origin. Knowledge of the relationship between early life gut microbiome and allergic diseases may facilitate development of novel preventive and treatment strategies. Based on our current knowledge, there are no currently available approved therapies for food allergy. More studies are needed to evaluate the safety and efficacy of allergen-specific and allergen-nonspecific approaches, as well as combination approaches.

Early versus late parenteral nutrition in ICU patients: cost analysis of the EPaNIC trial

PubMed Central

2012-01-01

Introduction The EPaNIC randomized controlled multicentre trial showed that postponing initiation of parenteral nutrition (PN) in ICU-patients to beyond the first week (Late-PN) enhanced recovery, as compared with Early-PN. This was mediated by fewer infections, accelerated recovery from organ failure and reduced duration of hospitalization. Now, the trial's preplanned cost analysis (N = 4640) from the Belgian healthcare payers' perspective is reported. Methods Cost data were retrieved from individual patient invoices. Undiscounted total healthcare costs were calculated for the index hospital stay. A cost tree based on acquisition of new infections and on prolonged length-of-stay was constructed. Contribution of 8 cost categories to total hospitalization costs was analyzed. The origin of drug costs was clarified in detail through the Anatomical Therapeutic Chemical (ATC) classification system. The potential impact of Early-PN on total hospitalization costs in other healthcare systems was explored in a sensitivity analysis. Results ICU-patients developing new infection (24.4%) were responsible for 42.7% of total costs, while ICU-patients staying beyond one week (24.3%) accounted for 43.3% of total costs. Pharmacy-related costs represented 30% of total hospitalization costs and were increased by Early-PN (+608.00 EUR/patient, p = 0.01). Notably, costs for ATC-J (anti-infective agents) (+227.00 EUR/patient, p = 0.02) and ATC-B (comprising PN) (+220.00 EUR/patient, p = 0.006) drugs were increased by Early-PN. Sensitivity analysis revealed a mean total cost increase of 1,210.00 EUR/patient (p = 0.02) by Early-PN, when incorporating the full PN costs. Conclusions The increased costs by Early-PN were mainly pharmacy-related and explained by higher expenditures for PN and anti-infective agents. The use of Early-PN in critically ill patients can thus not be recommended for both clinical (no benefit) and cost-related reasons. Trial registration ClinicalTrials.gov NCT00512122. PMID:22632574

Cost-effectiveness of cervical total disc replacement vs fusion for the treatment of 2-level symptomatic degenerative disc disease.

PubMed

Ament, Jared D; Yang, Zhuo; Nunley, Pierce; Stone, Marcus B; Kim, Kee D

2014-12-01

Cervical total disc replacement (CTDR) was developed to treat cervical spondylosis, while preserving motion. While anterior cervical discectomy and fusion (ACDF) has been the standard of care for 2-level disease, a randomized clinical trial (RCT) suggested similar outcomes. Cost-effectiveness of this intervention has never been elucidated. To determine the cost-effectiveness of CTDR compared with ACDF. Data were derived from an RCT that followed up 330 patients over 24 months. The original RCT consisted of multi-institutional data including private and academic institutions. Using linear regression for the current study, health states were constructed based on the stratification of the Neck Disability Index and a visual analog scale. Data from the 12-item Short-Form Health Survey questionnaires were transformed into utilities values using the SF-6D mapping algorithm. Costs were calculated by extracting Diagnosis-Related Group codes from institutional billing data and then applying 2012 Medicare reimbursement rates. The costs of complications and return-to-work data were also calculated. A Markov model was built to evaluate quality-adjusted life-years (QALYs) for both treatment groups. The model adopted a third-party payer perspective and applied a 3% annual discount rate. Patients included in the original RCT had to be diagnosed as having radiculopathy or myeloradiculopathy at 2 contiguous levels from C3-C7 that was unresponsive to conservative treatment for at least 6 weeks or demonstrated progressive symptoms. Incremental cost-effectiveness ratio of CTDR compared with ACDF. A strong correlation (R2 = 0.6864; P < .001) was found by projecting a visual analog scale onto the Neck Disability Index. Cervical total disc replacement had an average of 1.58 QALYs after 24 months compared with 1.50 QALYs for ACDF recipients. Cervical total disc replacement was associated with $2139 greater average cost. The incremental cost-effectiveness ratio of CTDR compared with ACDF was $24,594 per QALY at 2 years. Despite varying input parameters in the sensitivity analysis, the incremental cost-effectiveness ratio value stays below the threshold of $50,000 per QALY in most scenarios (range, -$58,194 to $147,862 per QALY). The incremental cost-effectiveness ratio of CTDR compared with traditional ACDF is lower than the commonly accepted threshold of $50,000 per QALY. This remains true with varying input parameters in a robust sensitivity analysis, reaffirming the stability of the model and the sustainability of this intervention.

How to Get It: A Guide to Defense - Related Information Resources (Librarians’ Edition, July 1998)

DTIC Science & Technology

1998-07-01

Objective (ADO), Navy (No Longer Published) See: Operational Requirements (OR), Navy Advanced Materials And Process Technology Information Analysis ...Center (AMPTIAC) See also: Information Analysis Centers (IAC) Originator: AMPTIAC 201 Mill Street Rome, NY 13440-6916 Order from: Originator Cost: Yes...Structures Information and Analysis Center (ASIAC) See also: Information Analysis Centers (IAC) Originator: Aerospace Structures Information and

48 CFR 847.303-70 - F.o.b. origin, freight prepaid, transportation charges to be included on the invoice.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false F.o.b. origin, freight... Transportation in Supply Contracts 847.303-70 F.o.b. origin, freight prepaid, transportation charges to be... shipping cost, if the shipped parcel weighs 70 pounds or less and does not exceed 108 inches in length and...

48 CFR 847.303-70 - F.o.b. origin, freight prepaid, transportation charges to be included on the invoice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false F.o.b. origin, freight... Transportation in Supply Contracts 847.303-70 F.o.b. origin, freight prepaid, transportation charges to be... shipping cost, if the shipped parcel weighs 70 pounds or less and does not exceed 108 inches in length and...

48 CFR 847.303-70 - F.o.b. origin, freight prepaid, transportation charges to be included on the invoice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false F.o.b. origin, freight... Transportation in Supply Contracts 847.303-70 F.o.b. origin, freight prepaid, transportation charges to be... shipping cost, if the shipped parcel weighs 70 pounds or less and does not exceed 108 inches in length and...

48 CFR 847.303-70 - F.o.b. origin, freight prepaid, transportation charges to be included on the invoice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false F.o.b. origin, freight... Transportation in Supply Contracts 847.303-70 F.o.b. origin, freight prepaid, transportation charges to be... shipping cost, if the shipped parcel weighs 70 pounds or less and does not exceed 108 inches in length and...

47 CFR 32.2121 - Buildings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Buildings. 32.2121 Section 32.2121... FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.2121 Buildings. (a) This account shall include the original cost of buildings, and the cost of all permanent fixtures, machinery...

NASA/Navy lift/cruise fan cost reduction studies

NASA Technical Reports Server (NTRS)

1977-01-01

Cost reduction studies were performed for the LCF459 turbotip fan for application with the YJ97-GE-100 gas generator in a multimission V/STOL research and technology aircraft. A 20 percent cost reduction of the research configuration based on the original preliminary design was achieved. The trade studies performed and the results in the area of cost reduction and weight are covered. A fan configuration is defined for continuation of the program through the detailed design phase.

3D Tree Dimensionality Assessment Using Photogrammetry and Small Unmanned Aerial Vehicles

PubMed Central

2015-01-01

Detailed, precise, three-dimensional (3D) representations of individual trees are a prerequisite for an accurate assessment of tree competition, growth, and morphological plasticity. Until recently, our ability to measure the dimensionality, spatial arrangement, shape of trees, and shape of tree components with precision has been constrained by technological and logistical limitations and cost. Traditional methods of forest biometrics provide only partial measurements and are labor intensive. Active remote technologies such as LiDAR operated from airborne platforms provide only partial crown reconstructions. The use of terrestrial LiDAR is laborious, has portability limitations and high cost. In this work we capitalized on recent improvements in the capabilities and availability of small unmanned aerial vehicles (UAVs), light and inexpensive cameras, and developed an affordable method for obtaining precise and comprehensive 3D models of trees and small groups of trees. The method employs slow-moving UAVs that acquire images along predefined trajectories near and around targeted trees, and computer vision-based approaches that process the images to obtain detailed tree reconstructions. After we confirmed the potential of the methodology via simulation we evaluated several UAV platforms, strategies for image acquisition, and image processing algorithms. We present an original, step-by-step workflow which utilizes open source programs and original software. We anticipate that future development and applications of our method will improve our understanding of forest self-organization emerging from the competition among trees, and will lead to a refined generation of individual-tree-based forest models. PMID:26393926

3D Tree Dimensionality Assessment Using Photogrammetry and Small Unmanned Aerial Vehicles.

PubMed

Gatziolis, Demetrios; Lienard, Jean F; Vogs, Andre; Strigul, Nikolay S

2015-01-01

Detailed, precise, three-dimensional (3D) representations of individual trees are a prerequisite for an accurate assessment of tree competition, growth, and morphological plasticity. Until recently, our ability to measure the dimensionality, spatial arrangement, shape of trees, and shape of tree components with precision has been constrained by technological and logistical limitations and cost. Traditional methods of forest biometrics provide only partial measurements and are labor intensive. Active remote technologies such as LiDAR operated from airborne platforms provide only partial crown reconstructions. The use of terrestrial LiDAR is laborious, has portability limitations and high cost. In this work we capitalized on recent improvements in the capabilities and availability of small unmanned aerial vehicles (UAVs), light and inexpensive cameras, and developed an affordable method for obtaining precise and comprehensive 3D models of trees and small groups of trees. The method employs slow-moving UAVs that acquire images along predefined trajectories near and around targeted trees, and computer vision-based approaches that process the images to obtain detailed tree reconstructions. After we confirmed the potential of the methodology via simulation we evaluated several UAV platforms, strategies for image acquisition, and image processing algorithms. We present an original, step-by-step workflow which utilizes open source programs and original software. We anticipate that future development and applications of our method will improve our understanding of forest self-organization emerging from the competition among trees, and will lead to a refined generation of individual-tree-based forest models.

34 CFR 685.301 - Origination of a loan by a Direct Loan Program school.

Code of Federal Regulations, 2012 CFR

2012-07-01

... originating a loan to cover the cost of attendance in a study abroad program and has a cohort default rate... in a program of study with less than a full academic year remaining, the school need not recalculate...

34 CFR 685.301 - Origination of a loan by a Direct Loan Program school.

Code of Federal Regulations, 2010 CFR

2010-07-01

... originating a loan to cover the cost of attendance in a study abroad program and has a cohort default rate... in a program of study with less than a full academic year remaining, the school need not recalculate...

34 CFR 685.301 - Origination of a loan by a Direct Loan Program school.

Code of Federal Regulations, 2013 CFR

2013-07-01

... originating a loan to cover the cost of attendance in a study abroad program and has a cohort default rate... in a program of study with less than a full academic year remaining, the school need not recalculate...

34 CFR 685.301 - Origination of a loan by a Direct Loan Program school.

Code of Federal Regulations, 2011 CFR

2011-07-01

... originating a loan to cover the cost of attendance in a study abroad program and has a cohort default rate... in a program of study with less than a full academic year remaining, the school need not recalculate...

Language, culture and international exchange of virtual patients.

PubMed

Muntean, Valentin; Calinici, Tudor; Tigan, Stefan; Fors, Uno G H

2013-02-11

Language and cultural differences could be a limiting factor for the international exchange of Virtual Patients (VPs), especially for small countries and languages of limited circulation. Our research evaluated whether it would be feasible to develop a VP based educational program in our Romanian institution, with cases in English and developed in a non-Romanian setting. The participants in the research comprised 4th year Romanian medical students from the Faculty of Medicine in Cluj-Napoca, Romania, with previous training exclusively in Romanian, good English proficiency and no experience with VPs. The students worked on eight VPs in two identical versions, Romanian and English. The first group (2010) of 136 students worked with four VPs developed in Cluj and the second group (2011) of 144 students with four VPs originally developed at an US University. Every student was randomly assigned two different VPs, one in Romanian and another in English. Student activity throughout the case, the diagnosis, therapeutic plan and diagnosis justification were recorded. We also compared student performance on the two VPs versions, Romanian and English and the student performance on the two sets of cases, originally developed in Romania, respectively USA. We found no significant differences between the students' performance on the Romanian vs. English version of VPs. Regarding the students' performance on the two sets of cases, in those originally developed in Romania, respectively in the USA, we found a number of statistically significant differences in the students' activity through the cases. There were no statistically significant differences in the students' ability to reach the correct diagnosis and therapeutic plan. The development of our program with VPs in English would be feasible, cost-effective and in accordance with the globalization of medical education.

The Integration of COTS/GOTS within NASA's HST Command and Control System

NASA Technical Reports Server (NTRS)

Pfarr, Thomas; Reis, James E.; Obenschain, Arthur F. (Technical Monitor)

2001-01-01

NASA's mission critical Hubble Space Telescope (HST) command and control system has been re-engineered with COTS/GOTS and minimal custom code. This paper focuses on the design of this new HST Control Center System (CCS) and the lessons learned throughout its development. CCS currently utilizes 31 COTS/GOTS products with an additional 12 million lines of custom glueware code; the new CCS exceeds the capabilities of the original system while significantly reducing the lines of custom code by more than 50%. The lifecycle of COTS/GOTS products will be examined including the pack-age selection process, evaluation process, and integration process. The advantages, disadvantages, issues, concerns, and lessons teamed for integrating COTS/GOTS into the NASA's mission critical HST CCS will be examined in detail. Command and control systems designed with traditional custom code development efforts will be compared with command and control systems designed with new development techniques relying heavily on COTS/COTS integration. This paper will reveal the many hidden costs of COTS/GOTS solutions when compared to traditional custom code development efforts; this paper will show the high cost of COTS/GOTS solutions including training expenses, consulting fees, and long-term maintenance expenses.

On the origin of sex chromosomes from meiotic drive.

PubMed

Úbeda, Francisco; Patten, Manus M; Wild, Geoff

2015-01-07

Most animals and many plants make use of specialized chromosomes (sex chromosomes) to determine an individual's sex. Best known are the XY and ZW sex-determination systems. Despite having evolved numerous times, sex chromosomes present something of an evolutionary puzzle. At their origin, alleles that dictate development as one sex or the other (primitive sex chromosomes) face a selective penalty, as they will be found more often in the more abundant sex. How is it possible that primitive sex chromosomes overcome this disadvantage? Any theory for the origin of sex chromosomes must identify the benefit that outweighs this cost and enables a sex-determining mutation to establish in the population. Here we show that a new sex-determining allele succeeds when linked to a sex-specific meiotic driver. The new sex-determining allele benefits from confining the driving allele to the sex in which it gains the benefit of drive. Our model requires few special assumptions and is sufficiently general to apply to the evolution of sex chromosomes in outbreeding cosexual or dioecious species. We highlight predictions of the model that can discriminate between this and previous theories of sex-chromosome origins. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

On the origin of sex chromosomes from meiotic drive

PubMed Central

Úbeda, Francisco; Patten, Manus M.; Wild, Geoff

2015-01-01

Most animals and many plants make use of specialized chromosomes (sex chromosomes) to determine an individual's sex. Best known are the XY and ZW sex-determination systems. Despite having evolved numerous times, sex chromosomes present something of an evolutionary puzzle. At their origin, alleles that dictate development as one sex or the other (primitive sex chromosomes) face a selective penalty, as they will be found more often in the more abundant sex. How is it possible that primitive sex chromosomes overcome this disadvantage? Any theory for the origin of sex chromosomes must identify the benefit that outweighs this cost and enables a sex-determining mutation to establish in the population. Here we show that a new sex-determining allele succeeds when linked to a sex-specific meiotic driver. The new sex-determining allele benefits from confining the driving allele to the sex in which it gains the benefit of drive. Our model requires few special assumptions and is sufficiently general to apply to the evolution of sex chromosomes in outbreeding cosexual or dioecious species. We highlight predictions of the model that can discriminate between this and previous theories of sex-chromosome origins. PMID:25392470

Development and validation of a Markov microsimulation model for the economic evaluation of treatments in osteoporosis.

PubMed

Hiligsmann, Mickaël; Ethgen, Olivier; Bruyère, Olivier; Richy, Florent; Gathon, Henry-Jean; Reginster, Jean-Yves

2009-01-01

Markov models are increasingly used in economic evaluations of treatments for osteoporosis. Most of the existing evaluations are cohort-based Markov models missing comprehensive memory management and versatility. In this article, we describe and validate an original Markov microsimulation model to accurately assess the cost-effectiveness of prevention and treatment of osteoporosis. We developed a Markov microsimulation model with a lifetime horizon and a direct health-care cost perspective. The patient history was recorded and was used in calculations of transition probabilities, utilities, and costs. To test the internal consistency of the model, we carried out an example calculation for alendronate therapy. Then, external consistency was investigated by comparing absolute lifetime risk of fracture estimates with epidemiologic data. For women at age 70 years, with a twofold increase in the fracture risk of the average population, the costs per quality-adjusted life-year gained for alendronate therapy versus no treatment were estimated at €9105 and €15,325, respectively, under full and realistic adherence assumptions. All the sensitivity analyses in terms of model parameters and modeling assumptions were coherent with expected conclusions and absolute lifetime risk of fracture estimates were within the range of previous estimates, which confirmed both internal and external consistency of the model. Microsimulation models present some major advantages over cohort-based models, increasing the reliability of the results and being largely compatible with the existing state of the art, evidence-based literature. The developed model appears to be a valid model for use in economic evaluations in osteoporosis.

Health care competition, strategic mission, and patient satisfaction: research model and propositions

PubMed Central

Rivers, Patrick A.; Glover, Saundra H.

2010-01-01

Purpose In all industries, competition among businesses has long been encouraged as a mechanism to increase value for patients. In other words, competition ensures the provision of better products and services to satisfy the needs of customers This paper aims to develop a model that can be used to empirically investigate a number of complex issues and relationships associated with competition in the health care industry. Design/methodology/approach A literature review was conducted. A total of 50 items of literature related to the subject were reviewed.. Various perspectives of competition, the nature of service quality, health system costs, and patient satisfaction in health care are examined Findings A model of the relationship among these variables is developed. The model depicts patient satisfaction as an outcome measure directly dependent on competition. Quality of care and health care systems costs, while also directly dependent on the strategic mission and goals, are considered as determinants of customer satisfaction as well. The model is discussed in the light of propositions for empirical research. Practical implications Empirical studies based on the model proposed in this paper should help identify areas with significant impact on patient satisfaction while maintaining high quality of service at lower costs in a competitive environment. Originality/value The authors develop a research model which included propositions to examine the complex issues of competition in the health care industry. PMID:19579575

The state-of-play and future of antibody therapeutics.

PubMed

Elgundi, Zehra; Reslan, Mouhamad; Cruz, Esteban; Sifniotis, Vicki; Kayser, Veysel

2017-12-01

It has been over four decades since the development of monoclonal antibodies (mAbs) using a hybridoma cell line was first reported. Since then more than thirty therapeutic antibodies have been marketed, mostly as oncology, autoimmune and inflammatory therapeutics. While antibodies are very efficient, their cost-effectiveness has always been discussed owing to their high costs, accumulating to more than one billion dollars from preclinical development through to market approval. Because of this, therapeutic antibodies are inaccessible to some patients in both developed and developing countries. The growing interest in biosimilar antibodies as affordable versions of therapeutic antibodies may provide alternative treatment options as well potentially decreasing costs. As certain markets begin to capitalize on this opportunity, regulatory authorities continue to refine the requirements for demonstrating quality, efficacy and safety of biosimilar compared to originator products. In addition to biosimilars, innovations in antibody engineering are providing the opportunity to design biobetter antibodies with improved properties to maximize efficacy. Enhancing effector function, antibody drug conjugates (ADC) or targeting multiple disease pathways via multi-specific antibodies are being explored. The manufacturing process of antibodies is also moving forward with advancements relating to host cell production and purification processes. Studies into the physical and chemical degradation pathways of antibodies are contributing to the design of more stable proteins guided by computational tools. Moreover, the delivery and pharmacokinetics of antibody-based therapeutics are improving as optimized formulations are pursued through the implementation of recent innovations in the field. Copyright © 2016 Elsevier B.V. All rights reserved.

Evaluation of a Prototype Low-Cost, Modular, Wireless Electroencephalography (EEG) Headset Design for Widespread Application

DTIC Science & Technology

2016-06-01

therefore did not implement or test actual sensors or electronic components (analog-to-digital conversion, power , and the wireless transmission ...ARL-TR-7703 ● JUNE 2016 US Army Research Laboratory Evaluation of a Prototype Low-Cost, Modular, Wireless Electroencephalography...originator. ARL-TR-7703 ● JUNE 2016 US Army Research Laboratory Evaluation of a Prototype Low-Cost, Modular, Wireless

A framework for evaluating forest restoration alternatives and their outcomes, over time, to inform monitoring: Bioregional inventory originated simulation under management

Treesearch

Jeremy S. Fried; Theresa B. Jain; Sara Loreno; Robert F. Keefe; Conor K. Bell

2017-01-01

The BioSum modeling framework summarizes current and prospective future forest conditions under alternative management regimes along with their costs, revenues and product yields. BioSum translates Forest Inventory and Analysis (FIA) data for input to the Forest Vegetation Simulator (FVS), summarizes FVS outputs for input to the treatment operations cost model (OpCost...

Testing low cost anaerobic digestion (AD) systems

USDA-ARS?s Scientific Manuscript database

To evaluate the potential for low technology and low cost digesters for small dairies, BARC and researchers from the University of Maryland installed six modified Taiwanese-model field-scale (FS) digesters near the original dairy manure digester. The FS units receive the same post-separated liquid ...

47 CFR 1.1404 - Complaint.

Code of Federal Regulations, 2010 CFR

2010-10-01

... telecommunications carriers for non-recurring costs. (2) Data and information should be based upon historical or... upon historical or original cost methodology, insofar as possible. Data should be derived from ARMIS...) through (n) and adding new paragraphs (g)(12) and (h) through (j). The added text contains information...

[The economics of preventing psycho-social risks].

PubMed

Golzio, Luigi

2014-01-01

The aim of the essay is to show the SHIELD methodology for helping the firm management to improve the risks prevention policy. It has been tested in the field with positive results. SHIELD is a cost-benefit analysis application to compare prevention and non-prevention costs, which arise from non-market risks. In the economic perspective safety risks (which include psycho-social risks) are non-market ones as they cause injures to workers during the job. SHIELD (Social Health Indicators for Economic Labour Decisions), is the original method proposed by the author. It is a cost benefits analysis application, which compares safety prevention and non-prevention costs. The comparison allow stop management to evaluate the efficiency of the current safety prevention policy as it helps top management to answer to the policy question: how much to invest in prevention costs? The costs comparison is obtained through the reclassification of safety costs between prevention and non-prevention costs (which are composed by claim damages and penalty sanction costs). SHIELD has been tested empirically in four companies operating in the agribusiness sector during a research financed by the Assessorato all'Agricoltura and INAI Regionale of Emilia Romagna Region. Results are postive: it has been found that the increase of prevention costs causes the cut of non-prevention costs in all companies looked into, as assumed by the high reliability organization theory. SHIELD can be applied to all companies which must have an accounting system by law, no matter of the industry they act. Its application has limited costs as SHIELD doesn't need changes in the accounting system. Safety costs sustained by the company are simply reclassified in prevention and non-prevention costs. The comparison of these two costs categories has been appreciated by top management of companies investigated as a useful support to decide the risks prevention policy for the company. The SHIELD original feature compared with others cost benefit analysis application is to compute registered costs in the company accounting system.

PG&E WaveConnect Program Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brendan P. Dooher; Edward Cheslak; Robert Booth

The PG&E WaveConnect project was intended to demonstrate the technical and economic viability of wave power in the open ocean adjacent to PG&E's service territory. WaveConnect was conceived as a multi-stage development process leading to long-term megawatt-scale wave power production. The first-stage tasks consisted of site selection, permitting, pilot plant design, and assessment of technology and commercial readiness. The second stage would have included development of infrastructure, undersea cabling, and deployment of wave energy conversion devices (WECs). In the third stage, the most promising WEC devices would have been deployed in larger quantities and connected to the grid. This reportmore » documents the findings of Stage One. Site Selection: After studying the wave energy potential, grid interconnection and other project infrastructure along the California coast, PG&E selected two sites: one near Eureka, called the Humboldt WaveConnect (HWC) project, and another near Vandenberg Air Force Base, called the Central Coast WaveConnect project (CCWC). Permitting: FERC issued PG&E preliminary permits for HWC in 2008 and for CCWC in 2010. PG&E chose to use FERC's Pilot Project Licensing Process, which was intended to streamline licensing to allow relatively quick and easy installation, operation, and environmental testing for pilot projects. Permitting, however, proved to be complicated, time-consuming and expensive, mainly because of the uncertain impacts of WEC devices. PG&E learned that even under the PPLP the project would still require a full analysis under CEQA, including an EIR, as well as Monitoring and Adaptive Management Programs and other requirements that had significant cost and scheduling implications. A majority of efforts were expended on permitting activities. Pilot Plant Design: PG&E prepared a conceptual design for a 5-MW pilot test facility at the Humboldt site, which consisted of an off-shore deployment area where WECs of different designs and from different device manufacturers could be tested. PG&E was to provide permitting, subsea cables, and on-shore facilities necessary to connect WaveConnect to an existing PG&E substation, while the WEC manufacturers would provide, operate and maintain their devices during the test period. Technology and Commercial Readiness: PG&E issued a Request for Information to the wave power industry to assess the technical and commercial capabilities of WEC manufacturers. Sixteen manufacturers responded, representing the four best-known and most mature designs. PG&E found that WECs are early-stage devices with evolving designs and little real-world operating experience. These characteristics made environmental impacts difficult to assess, which complicated permitting efforts. It also made a megawatt-scale demonstration project difficult to support because early stage WECs are costly and have limited track records for performance and reliability. Results: PG&E withdrew its FERC DPLA for HWC in November 2010 and surrendered its preliminary permit for CCWC in May 2011, effectively discontinuing the project for the following combination of reasons: Permitting issues were much more challenging than originally anticipated. Stage One project funding of $6 million proved insufficient to complete the necessary development and permitting work. During Stage One development, PG&E determined that permitting costs would be $2 million to $5 million greater than originally budgeted. The cost of developing a five-year, 5-MW pilot project at Humboldt Bay is much greater than the $15 million to $20 million originally estimated. Even assuming that vendors provide WEC devices at no cost to the utility, which was the proposed strategy with WaveConnect, PG&E concluded that a pilot project comparable to HWC would cost approximately $47 million. If WEC devices were purchased for such a project, its total cost would be on the order of $90 million. It is unclear when or if wave power will become competitive with renewable energy alternatives. Significant additional investment in design, testing and demonstration will be needed to improve designs and reduce costs. Using a vendor-provided installed cost goal of $2500/kW for mature WECs in five to 10 years, PG&E concluded that their LCOE would be in the range of $175-$250/MWh, which is not competitive with current or near-term renewable alternatives such as wind or solar photovoltaics. Although PG&E discontinued the project and no WEC devices were deployed, WaveConnect advanced PG&E's understanding of the technological, engineering, permitting, environmental, economic, stakeholder, and related issues involved in undertaking any wave power project now or in the future. As WEC technologies mature, and regulatory and permitting agencies grow more familiar with their environmental impacts, PG&E believes that wave power will merit further evaluation, demonstration and deployment.« less

17 CFR 140.24 - Control and accountability procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the risk of compromise and reduce storage costs. (2) Top Secret documents, except for the controlled...) Records shall be maintained to show the number and distribution of reproduced copies to all Top Secret... the consent of the originator. (3) Unless restricted by the originating agency, Secret and...

Copyboard Quickly Makes Clean Printing Plates

NASA Technical Reports Server (NTRS)

Balandis, W. D.

1985-01-01

Vacuum-chuck eliminates glass and sponge artwork support. Vacuum copyboard allows camera-ready original slid on top plate for proper positioning, then holds securely for photography. Bleed valve allows vacuum in copyboard box adjusted for small or large originals. With new copyboard, time-consuming and costly procedures unnecessary.

[Effects of hospital mergers on health economy].

PubMed

Ingebrigtsen, Tor

2010-05-06

Norwegian hospitals have been characterised by increasing activity, expansion of services and increasing costs for a long time. Differences in quality and accessibility have been documented between hospitals in various geographic locations. Transferral of hospital ownership to the state (from 2002) aimed at increasing capacities and improving quality of services, but also at restricting the increase of costs. These goals have only been partly met. The structure of hospital trusts and organisation of services are therefore continuously debated. This literature review aims at examining whether hospital mergers can reduce costs and at the same time increase the quality of services offered. Literature was identified through a Medline search using the terms "hospital", "merger" and "cost saving". The results are summarized and discussed. Seven original studies of totally 476 hospital mergers (in the USA, Great Britain and Norway) were identified in the period 1982 - 2000. The literature indicates that hospital mergers have a potential to reduce costs by about 10 % if the process achieves complete fusion of previously independent organisations, with a more optimal dimensioning of services and development of a common organizational culture. Collaboration between top management and the professional bureaucracy are prerequisites for success. Mergers are associated with a significant risk of unexpected problems and temporary reduced quality of the services.

The scenario on the origin of translation in the RNA world: in principle of replication parsimony

PubMed Central

2010-01-01

Background It is now believed that in the origin of life, proteins should have been "invented" in an RNA world. However, due to the complexity of a possible RNA-based proto-translation system, this evolving process seems quite complicated and the associated scenario remains very blurry. Considering that RNA can bind amino acids with specificity, it has been reasonably supposed that initial peptides might have been synthesized on "RNA templates" containing multiple amino acid binding sites. This "Direct RNA Template (DRT)" mechanism is attractive because it should be the simplest mechanism for RNA to synthesize peptides, thus very likely to have been adopted initially in the RNA world. Then, how this mechanism could develop into a proto-translation system mechanism is an interesting problem. Presentation of the hypothesis Here an explanation to this problem is shown considering the principle of "replication parsimony" --- genetic information tends to be utilized in a parsimonious way under selection pressure, due to its replication cost (e.g., in the RNA world, nucleotides and ribozymes for RNA replication). Because a DRT would be quite long even for a short peptide, its replication cost would be great. Thus the diversity and the length of functional peptides synthesized by the DRT mechanism would be seriously limited. Adaptors (proto-tRNAs) would arise to allow a DRT's complementary strand (called "C-DRT" here) to direct the synthesis of the same peptide synthesized by the DRT itself. Because the C-DRT is a necessary part in the DRT's replication, fewer turns of the DRT's replication would be needed to synthesize definite copies of the functional peptide, thus saving the replication cost. Acting through adaptors, C-DRTs could transform into much shorter templates (called "proto-mRNAs" here) and substitute the role of DRTs, thus significantly saving the replication cost. A proto-rRNA corresponding to the small subunit rRNA would then emerge to aid the binding of proto-tRNAs and proto-mRNAs, allowing the reduction of base pairs between them (ultimately resulting in the triplet anticodon/codon pair), thus further saving the replication cost. In this context, the replication cost saved would allow the appearance of more and longer functional peptides and, finally, proteins. The hypothesis could be called "DRT-RP" ("RP" for "replication parsimony"). Testing the hypothesis The scenario described here is open for experimental work at some key scenes, including the compact DRT mechanism, the development of adaptors from aa-aptamers, the synthesis of peptides by proto-tRNAs and proto-mRNAs without the participation of proto-rRNAs, etc. Interestingly, a recent computer simulation study has demonstrated the plausibility of one of the evolving processes driven by replication parsimony in the scenario. Implication of the hypothesis An RNA-based proto-translation system could arise gradually from the DRT mechanism according to the principle of "replication parsimony" --- to save the replication cost of RNA templates for functional peptides. A surprising side deduction along the logic of the hypothesis is that complex, biosynthetic amino acids might have entered the genetic code earlier than simple, prebiotic amino acids, which is opposite to the common sense. Overall, the present discussion clarifies the blurry scenario concerning the origin of translation with a major clue, which shows vividly how life could "manage" to exploit potential chemical resources in nature, eventually in an efficient way over evolution. Reviewers This article was reviewed by Eugene V. Koonin, Juergen Brosius, and Arcady Mushegian. PMID:21110883

Wood for energy and rural development: the Philippine experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denton, F.H.

1983-01-01

The Philippine wood energy programme (dendro-thermal system) was originally developed as a source of energy independent of imported oil, and at a lower cost than oil. It has social benefits: new jobs, land distribution, rural income increment, and reforestation by tree farmers. Tree farming, its administration and organization of farmer institutions are essential to the programme, as are the development of farming techniques to produce energy, trees (growth of ipil-ipil), and an improved tree growth rate. An analysis of the economics of wood energy led to the conclusion that raw wood fuel can be cheaper than oil. In estimated costsmore » of electricity, the dendro-thermal plants can produce power at competitive rates. 36 references.« less

A Systematic Review and Narrative Synthesis of Health Economic Studies Conducted for Hereditary Haemochromatosis.

PubMed

de Graaff, Barbara; Neil, Amanda; Sanderson, Kristy; Si, Lei; Yee, Kwang Chien; Palmer, Andrew J

2015-10-01

Hereditary haemochromatosis (HH) is a common genetic condition amongst people of northern European heritage. HH is associated with increased iron absorption leading to parenchymal organ damage and multiple arthropathies. Early diagnosis and treatment prevents complications. Population screening may increase early diagnosis, but no programmes have been introduced internationally: a paucity of health economic data is often cited as a barrier. To conduct a systematic review of all health economic studies in HH. Studies were identified through electronic searching of economic/biomedical databases. Any study on HH with original economic component was included. Study quality was formally assessed. Health economic data were extracted and analysed through narrative synthesis. Thirty-eight studies met the inclusion criteria. The majority of papers reported on costs or cost effectiveness of screening programmes. Whilst most concluded screening was cost effective compared with no screening, methodological flaws limit the quality of these findings. Assumptions regarding clinical penetrance, effectiveness of screening, health-state utility values (HSUVs), exclusion of early symptomatology (such as fatigue, lethargy and multiple arthropathies) and quantification of costs associated with HH were identified as key limitations. Treatment studies concluded therapeutic venepuncture was the most cost-effective intervention. There is a paucity of high-quality health economic studies relating to HH. The development of a comprehensive HH cost-effectiveness model utilising HSUVs is required to determine whether screening is worthwhile.

The many costs of sex.

PubMed

Lehtonen, Jussi; Jennions, Michael D; Kokko, Hanna

2012-03-01

Explaining the evolution of sex is challenging for biologists. A 'twofold cost' compared with asexual reproduction is often quoted. If a cost of this magnitude exists, the benefits of sex must be large for it to have evolved and be maintained. Focusing on benefits can be misleading, as this sidelines important questions about the cost of sex: what is the source of the twofold cost: males, genome dilution or both? Does the cost deviate from twofold? What other factors make sex costly? How should the costs of sex be empirically measured? The total cost of sex and how it varies in different contexts must be known to determine the benefits needed to account for the origin and maintenance of sex. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development Of A Web Service And Android 'APP' For The Distribution Of Rainfall Data. A Bottom-Up Remote Sensing Data Mining And Redistribution Project In The Age Of The 'Web 2.0'

NASA Astrophysics Data System (ADS)

Mantas, Vasco M.; Pereira, A. J. S. C.; Liu, Zhong

2013-12-01

A project was devised to develop a set of freely available applications and web services that can (1) simplify access from Mobile Devices to TOVAS data and (2) support the development of new datasets through data repackaging and mash-up. The bottom-up approach enables the multiplication of new services, often of limited direct interest to the organizations that produces the original, global datasets, but significant to small, local users. Through this multiplication of services, the development cost is transferred to the intermediate or end users and the entire process is made more efficient, even allowing new players to use the data in innovative ways.

A systematic review and cost analysis of robot-assisted hysterectomy in malignant and benign conditions.

PubMed

Tapper, Anna-Maija; Hannola, Mikko; Zeitlin, Rainer; Isojärvi, Jaana; Sintonen, Harri; Ikonen, Tuija S

2014-06-01

In order to assess the effectiveness and costs of robot-assisted hysterectomy compared with conventional techniques we reviewed the literature separately for benign and malignant conditions, and conducted a cost analysis for different techniques of hysterectomy from a hospital economic database. Unlimited systematic literature search of Medline, Cochrane and CRD databases produced only two randomized trials, both for benign conditions. For the outcome assessment, data from two HTA reports, one systematic review, and 16 original articles were extracted and analyzed. Furthermore, one cost modelling and 13 original cost studies were analyzed. In malignant conditions, less blood loss, fewer complications and a shorter hospital stay were considered as the main advantages of robot-assisted surgery, like any mini-invasive technique when compared to open surgery. There were no significant differences between the techniques regarding oncological outcomes. When compared to laparoscopic hysterectomy, the main benefit of robot-assistance was a shorter learning curve associated with fewer conversions but the length of robotic operation was often longer. In benign conditions, no clinically significant differences were reported and vaginal hysterectomy was considered the optimal choice when feasible. According to Finnish data, the costs of robot-assisted hysterectomies were 1.5-3 times higher than the costs of conventional techniques. In benign conditions the difference in cost was highest. Because of expensive disposable supplies, unit costs were high regardless of the annual number of robotic operations. Hence, in the current distribution of cost pattern, economical effectiveness cannot be markedly improved by increasing the volume of robotic surgery. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Drilling and Production Testing the Methane Hydrate Resource Potential Associated with the Barrow Gas Fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steve McRae; Thomas Walsh; Michael Dunn

2010-02-22

In November of 2008, the Department of Energy (DOE) and the North Slope Borough (NSB) committed funding to develop a drilling plan to test the presence of hydrates in the producing formation of at least one of the Barrow Gas Fields, and to develop a production surveillance plan to monitor the behavior of hydrates as dissociation occurs. This drilling and surveillance plan was supported by earlier studies in Phase 1 of the project, including hydrate stability zone modeling, material balance modeling, and full-field history-matched reservoir simulation, all of which support the presence of methane hydrate in association with the Barrowmore » Gas Fields. This Phase 2 of the project, conducted over the past twelve months focused on selecting an optimal location for a hydrate test well; design of a logistics, drilling, completion and testing plan; and estimating costs for the activities. As originally proposed, the project was anticipated to benefit from industry activity in northwest Alaska, with opportunities to share equipment, personnel, services and mobilization and demobilization costs with one of the then-active exploration operators. The activity level dropped off, and this benefit evaporated, although plans for drilling of development wells in the BGF's matured, offering significant synergies and cost savings over a remote stand-alone drilling project. An optimal well location was chosen at the East Barrow No.18 well pad, and a vertical pilot/monitoring well and horizontal production test/surveillance well were engineered for drilling from this location. Both wells were designed with Distributed Temperature Survey (DTS) apparatus for monitoring of the hydrate-free gas interface. Once project scope was developed, a procurement process was implemented to engage the necessary service and equipment providers, and finalize project cost estimates. Based on cost proposals from vendors, total project estimated cost is $17.88 million dollars, inclusive of design work, permitting, barging, ice road/pad construction, drilling, completion, tie-in, long-term production testing and surveillance, data analysis and technology transfer. The PRA project team and North Slope have recommended moving forward to the execution phase of this project.« less

GEOPHYSICAL WELL LOG/CORE DESCRIPTIONS, CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas C. Chidsey Jr; David E. Eby; Laura L. Wray

2003-12-01

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place ismore » recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.« less

POROSITY/PERMEABILITY CROSS-PLOTS: CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas C. Chidsey Jr; David E. Eby; Laura L. Wray

2003-12-01

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place ismore » recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.« less

CROSS SECTIONS AND FIELD MAPS: CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas C. Chidsey Jr; Craig D. Morgan; Kevin McClure

2003-12-01

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place ismore » recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.« less

THIN SECTION DESCRIPTIONS: LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO

DOE Office of Scientific and Technical Information (OSTI.GOV)

David E. Eby; Laura L. Wray

2003-12-01

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place ismore » recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field in Utah (figure 1). However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.« less

A Modeling Tool for Household Biogas Burner Flame Port Design

NASA Astrophysics Data System (ADS)

Decker, Thomas J.

Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

Investigation of Low Cost Sensor-Based Leak Detection System for Fence Line Applications

EPA Science Inventory

With recent technological advances, low-cost time-resolved sensors may become effective tools to support time-integrated passive sampling strategies by helping to decipher origin of emissions in real-time. As part of the Petroleum Refinery Risk and Technology Review, New Source ...

48 CFR 9904.410-63 - Effective date.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-63 Section 9904.410-63 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE... ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.410-63 Effective date. This Standard is effective as of... accounting practice disclosed or established prior to the date established by 9904.410-80(b) of the original...

A review on solar cells from Si-single crystals to porous materials and quantum dots

PubMed Central

Badawy, Waheed A.

2013-01-01

Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. Permanent researches on cost reduction and improved solar cell efficiency have led to the marketing of solar modules having 12–16% solar conversion efficiency. Application of polycrystalline Si and other forms of Si have reduced the cost but on the expense of the solar conversion efficiency. The second generation solar cells were based on thin film technology. Thin films of amorphous Si, CIS (copper–indium–selenide) and t-Si were employed. Solar conversion efficiencies of about 12% have been achieved with a remarkable cost reduction. The third generation solar cells are based on nano-crystals and nano-porous materials. An advanced photovoltaic cell, originally developed for satellites with solar conversion efficiency of 37.3%, based on concentration of the solar spectrum up to 400 suns was developed. It is based on extremely thin concentration cells. New sensitizer or semiconductor systems are necessary to broaden the photo-response in solar spectrum. Hybrids of solar and conventional devices may provide an interim benefit in seeking economically valuable devices. New quantum dot solar cells based on CdSe–TiO2 architecture have been developed. PMID:25750746

A review on solar cells from Si-single crystals to porous materials and quantum dots.

PubMed

Badawy, Waheed A

2015-03-01

Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. Permanent researches on cost reduction and improved solar cell efficiency have led to the marketing of solar modules having 12-16% solar conversion efficiency. Application of polycrystalline Si and other forms of Si have reduced the cost but on the expense of the solar conversion efficiency. The second generation solar cells were based on thin film technology. Thin films of amorphous Si, CIS (copper-indium-selenide) and t-Si were employed. Solar conversion efficiencies of about 12% have been achieved with a remarkable cost reduction. The third generation solar cells are based on nano-crystals and nano-porous materials. An advanced photovoltaic cell, originally developed for satellites with solar conversion efficiency of 37.3%, based on concentration of the solar spectrum up to 400 suns was developed. It is based on extremely thin concentration cells. New sensitizer or semiconductor systems are necessary to broaden the photo-response in solar spectrum. Hybrids of solar and conventional devices may provide an interim benefit in seeking economically valuable devices. New quantum dot solar cells based on CdSe-TiO2 architecture have been developed.

Spacecraft Software Maintenance: An Effective Approach to Reducing Costs and Increasing Science Return

NASA Technical Reports Server (NTRS)

Shell, Elaine M.; Lue, Yvonne; Chu, Martha I.

1999-01-01

Flight software is a mission critical element of spacecraft functionality and performance. When ground operations personnel interface to a spacecraft, they are typically dealing almost entirely with the capabilities of onboard software. This software, even more than critical ground/flight communications systems, is expected to perform perfectly during all phases of spacecraft life. Due to the fact that it can be reprogrammed on-orbit to accommodate degradations or failures in flight hardware, new insights into spacecraft characteristics, new control options which permit enhanced science options, etc., the on- orbit flight software maintenance team is usually significantly responsible for the long term success of a science mission. Failure of flight software to perform as needed can result in very expensive operations work-around costs and lost science opportunities. There are three basic approaches to maintaining spacecraft software--namely using the original developers, using the mission operations personnel, or assembling a center of excellence for multi-spacecraft software maintenance. Not planning properly for flight software maintenance can lead to unnecessarily high on-orbit costs and/or unacceptably long delays, or errors, in patch installations. A common approach for flight software maintenance is to access the original development staff. The argument for utilizing the development staff is that the people who developed the software will be the best people to modify the software on-orbit. However, it can quickly becomes a challenge to obtain the services of these key people. They may no longer be available to the organization. They may have a more urgent job to perform, quite likely on another project under different project management. If they havn't worked on the software for a long time, they may need precious time for refamiliarization to the software, testbeds and tools. Further, a lack of insight into issues related to flight software in its on-orbit environment, may find the developer unprepared for the challenges. The second approach is to train a member of the flight operations team to maintain the spacecraft software. This can prove to be a costly and inflexible solution. The person assigned to this duty may not have enough work to do during a problem free period and may have too much to do when a problem arises. If the person is a talented software engineer, he/she may not enjoy the limited software opportunities available in this position; and may eventually leave for newer technology computer science opportunities. Training replacement flight software personnel can be a difficult and lengthy process. The third approach is to assemble a center of excellence for on-orbit spacecraft software maintenance. Personnel in this specialty center can be managed to support flight software of multiple missions at once. The variety of challenges among a set of on-orbit missions, can result in a dedicated, talented staff which is fully trained and available to support each mission's needs. Such staff are not software developers but are rather spacecraft software systems engineers. The cost to any one mission is extremely low because the software staff works and charges, minimally on missions with no current operations issues; and their professional insight into on-orbit software troubleshooting and maintenance methods ensures low risk, effective and minimal-cost solutions to on-orbit issues.

Industrial advanced turbine systems: Development and demonstration. Annual report, October 1, 1996--September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The US DOE has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The ATS will foster (1) early market penetration that enhances the global competitiveness of US industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace and (4) the retention and expansion of the skilled US technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstrationmore » program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. Forecasts call for completion of the program within budget as originally estimated. Scheduled completion is forecasted to be approximately 3 years late to original plan. This delay has been intentionally planned in order to better match program tasks to the anticipated availability of DOE funds. To ensure the timely realization of DOE/Solar program goals, the development schedule for the smaller system (Mercury 50) and enabling technologies has been maintained, and commissioning of the field test unit is scheduled for May of 2000. As of the end of the reporting period work on the program is 22.80% complete based upon milestones completed. This measurement is considered quite conservative as numerous drawings on the Mercury 50 are near release. Variance information is provided in Section 4.0-Program Management.« less

Method: low-cost delivery of the cotton leaf crumple virus-induced gene silencing system

PubMed Central

2012-01-01

Background We previously developed a virus-induced gene silencing (VIGS) vector for cotton from the bipartite geminivirusCotton leaf crumple virus (CLCrV). The original CLCrV VIGS vector was designed for biolistic delivery by a gene gun. This prerequisite limited the use of the system to labs with access to biolistic equipment. Here we describe the adaptation of this system for delivery by Agrobacterium (Agrobacterium tumefaciens). We also describe the construction of two low-cost particle inflow guns. Results The biolistic CLCrV vector was transferred into two Agrobacterium binary plasmids. Agroinoculation of the binary plasmids into cotton resulted in silencing and GFP expression comparable to the biolistic vector. Two homemade low-cost gene guns were used to successfully inoculate cotton (G. hirsutum) and N. benthamiana with either the CLCrV VIGS vector or the Tomato golden mosaic virus (TGMV) VIGS vector respectively. Conclusions These innovations extend the versatility of CLCrV-based VIGS for analyzing gene function in cotton. The two low-cost gene guns make VIGS experiments affordable for both research and teaching labs by providing a working alternative to expensive commercial gene guns. PMID:22853641

Ejector gas cooling. Phase 1. Final report, 1 April 1987-30 April 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacCracken, C.D.; Silvetti, B.M.; Hrbek, R.

1988-11-01

Closed-circuit ejector cooling systems have never in the past achieved acceptable operating efficiencies in their vapor-compression cycle using standard refrigerants. Despite their long history, relative simplicity, quietness, rugged design, low maintenance and low cost, they could not compete with electric-motor-driven compressors. Phase I is an assessment of two immiscible fluids in an ejector cooling system with different latent heat capacity and molecular weights intended to require less heat in the boiler producing the propellant and taking more heat out in the evaporator cooling fluid. Actual tests corrected to standard conditions and neglecting thermal losses showed 0.5 closed-cycle thermal COP (excludingmore » stack losses), higher than ever previously achieved but below original expectations. Computer programs developed indicate higher COP values are attainable along with competitive first costs.« less

Performance Testing

NASA Technical Reports Server (NTRS)

1991-01-01

Systems Technology, Inc., Hawthorne, CA, developed an electronic Critical Tracking Task (CTT) system that analyzes and rates a subject's visual/motor responses for Ames Research Center. Originally applied to measuring the effects of long term confinement in the mid 1960's, the CTT system is now marketed as FACTOR 1000 by Performance Factors, Inc. Alameda, CA, under a licensing agreement with Systems Technology. The system is a non-invasive, self-administered test that takes less than a minute and detects impairment from a broad range of causes, including stress, fatigue, illness, drugs, or alcohol. It is used daily by Old Town Trolley Tours, San Diego, CA, to assess each driver's physical coordination skills prior to the start of each shift. FACTOR 1000 reduces liabilities and costs related to accidents, and costs less than one dollar per day per employee. Performance Factors is now BioFactors, Inc.

Machine rates for selected forest harvesting machines

Treesearch

R.W. Brinker; J. Kinard; Robert Rummer; B. Lanford

2002-01-01

Very little new literature has been published on the subject of machine rates and machine cost analysis since 1989 when the Alabama Agricultural Experiment Station Circular 296, Machine Rates for Selected Forest Harvesting Machines, was originally published. Many machines discussed in the original publication have undergone substantial changes in various aspects, not...

A review of the differences and similarities between generic drugs and their originator counterparts, including economic benefits associated with usage of generic medicines, using Ireland as a case study.

PubMed

Dunne, Suzanne; Shannon, Bill; Dunne, Colum; Cullen, Walter

2013-01-05

Generic medicines are those where patent protection has expired, and which may be produced by manufacturers other than the innovator company. Use of generic medicines has been increasing in recent years, primarily as a cost saving measure in healthcare provision. Generic medicines are typically 20 to 90% cheaper than originator equivalents. Our objective is to provide a high-level description of what generic medicines are and how they differ, at a regulatory and legislative level, from originator medicines. We describe the current and historical regulation of medicines in the world's two main pharmaceutical markets, in addition to the similarities, as well as the differences, between generics and their originator equivalents including the reasons for the cost differences seen between originator and generic medicines. Ireland is currently poised to introduce generic substitution and reference pricing. This article refers to this situation as an exemplar of a national system on the cusp of significant health policy change, and specifically details Ireland's history with usage of generic medicines and how the proposed changes could affect healthcare provision.

A review of the differences and similarities between generic drugs and their originator counterparts, including economic benefits associated with usage of generic medicines, using Ireland as a case study

PubMed Central

2013-01-01

Generic medicines are those where patent protection has expired, and which may be produced by manufacturers other than the innovator company. Use of generic medicines has been increasing in recent years, primarily as a cost saving measure in healthcare provision. Generic medicines are typically 20 to 90% cheaper than originator equivalents. Our objective is to provide a high-level description of what generic medicines are and how they differ, at a regulatory and legislative level, from originator medicines. We describe the current and historical regulation of medicines in the world’s two main pharmaceutical markets, in addition to the similarities, as well as the differences, between generics and their originator equivalents including the reasons for the cost differences seen between originator and generic medicines. Ireland is currently poised to introduce generic substitution and reference pricing. This article refers to this situation as an exemplar of a national system on the cusp of significant health policy change, and specifically details Ireland’s history with usage of generic medicines and how the proposed changes could affect healthcare provision. PMID:23289757

Food Service System

NASA Technical Reports Server (NTRS)

1992-01-01

The 3M Food Service System 2 employs a "cook/chill" concept for serving food in hospitals. The system allows staff to prepare food well in advance, maintain heat, visual appeal and nutritional value as well as reducing operating costs. The integral heating method, which keeps hot foods hot and cold foods cold, was developed by 3M for the Apollo Program. In the 1970s, the company commercialized the original system and in 1991, introduced Food Service System 2. Dishes are designed to resemble those used at home, and patient satisfaction has been high.

CAMAC and NIM systems in the space program. [Computer-Aided Measurement And Control and Nuclear Instrumentation Modules

NASA Technical Reports Server (NTRS)

Trainor, J. H.; Ehrmann, C. H.; Kaminski, T. J.

1975-01-01

The CAMAC and NIM instrumentation systems were developed originally to serve the needs of nuclear research institutions in Europe and North America. CAMAC and NIM are currently considered in several studies at the systems level conducted by NASA and ESRO groups. NIM and CAMAC studies for applications related to the space shuttle are discussed along with the advantages provided by aspects of modularization and standardization, a use of NIM and CAMAC equipment in connection with a group of astrophysics experiments, and questions of cost effectiveness.

Select medications that unexpectedly lower HbA1c levels.

PubMed

Tillman, F; Kim, J

2018-04-19

A variety of medication classes are available for diabetes; however, treatment options become limited due to adverse effect profiles and cost. Current diabetes guidelines include agents not originally developed for diabetes treatment, bromocriptine and colesevelam. Other non-diabetes medications demonstrating haemoglobin A1c lowering, including agents for weight loss, depression, anaemia and coronary artery disease, are described in this review article. More research looking into the impact of non-diabetes medications on blood glucose may offer additional diabetes treatment strategies. © 2018 John Wiley & Sons Ltd.

Benefit from NASA

NASA Image and Video Library

2004-04-22

NASA structural materials engineer, Jonathan Lee, displays blocks and pistons as examples of some of the uses for NASA’s patented high-strength aluminum alloy originally developed at Marshall Space Flight Center in Huntsville, Alabama. NASA desired an alloy for aerospace applications with higher strength and wear-resistance at elevated temperatures. The alloy is a solution to reduce costs of aluminum engine pistons and lower engine emissions for the automobile industry. The Boats and Outboard Engines Division at Bombardier Recreational Products of Sturtevant, Wisconsin is using the alloy for pistons in its Evinrude E-Tec outboard engine line.

Transonic applications of the Wake Imaging System

NASA Astrophysics Data System (ADS)

Crowder, J. P.

1982-09-01

The extension of a rapid flow field survey method (wake imaging system) originally developed for low speed wind tunnel operation, to transonic wind tunnel applications is discussed. The advantage of the system, beside the simplicity and low cost of the data acquisition system, is that the probe position data are recorded as an optical image of the actual sensor and thus are unaffected by the inevitable deflections of the probe support. This permits traversing systems which are deliberately flexible and have unusual motions. Two transverse drive systems are described and several typical data images are given.

Coastal watershed management across an international border in the Tijuana River watershed

NASA Astrophysics Data System (ADS)

Fernandez, Linda

2005-05-01

The paper develops and applies a game theoretic model of upstream and downstream countries to examine cooperative and noncooperative strategies of a common watershed. The application to the Tijuana River watershed shared by the United States and Mexico provides quantification of the strategies for internalizing water quality externalities to upstream and downstream originating from sedimentation. Results show that different transfer payments, such as the Chander/Tulkens cost sharing rule and the Shapley value, imply the size of the existing transfer from downstream to upstream could increase the amount currently allocated.

Commercial Crew Development Program Overview

NASA Technical Reports Server (NTRS)

Russell, Richard W.

2011-01-01

NASA's Commercial Crew Development Program is designed to stimulate efforts within the private sector that will aid in the development and demonstration of safe, reliable, and cost-effective space transportation capabilities. With the goal of delivery cargo and eventually crew to Low Earth Orbit (LEO) and the International Space Station (ISS) the program is designed to foster the development of new spacecraft and launch vehicles in the commercial sector. Through Space Act Agreements (SAAs) in 2011 NASA provided $50M of funding to four partners; Blue Origin, The Boeing Company, Sierra Nevada Corporation, and SpaceX. Additional, NASA has signed two unfunded SAAs with ATK and United Space Alliance. This paper will give a brief summary of these SAAs. Additionally, a brief overview will be provided of the released version of the Commercial Crew Development Program plans and requirements documents.

What are the cost savings associated with providing access to specialist care through the Champlain BASE eConsult service? A costing evaluation

PubMed Central

Liddy, Clare; Drosinis, Paul; Deri Armstrong, Catherine; McKellips, Fanny; Afkham, Amir; Keely, Erin

2016-01-01

Objective This study estimates the costs and potential savings associated with all eConsult cases completed between 1 April 2014 and 31 March 2015. Design Costing evaluation from the societal perspective estimating the costs and potential savings associated with all eConsults completed during the study period. Setting Champlain health region in Eastern Ontario, Canada. Population Primary care providers and specialists registered to use the eConsult service. Main outcome measures Costs included (1) delivery costs; (2) specialist remuneration; (3) costs associated with traditional (face-to-face) referrals initiated as a result of eConsult. Potential savings included (1) costs of traditional referrals avoided; (2) indirect patient savings through avoided travel and lost wages/productivity. Net potential societal cost savings were estimated by subtracting total costs from total potential savings. Results A total of 3487 eConsults were completed during the study period. In 40% of eConsults, a face-to-face specialist visit was originally contemplated but avoided as result of eConsult. In 3% of eConsults, a face-to-face specialist visit was not originally contemplated but was prompted as a result of the eConsult. From the societal perspective, total costs were estimated at $207 787 and total potential savings were $246 516. eConsult led to a net societal saving of $38 729 or $11 per eConsult. Conclusions Our findings demonstrate potential cost savings from the societal perspective, as patients avoided the travel costs and lost wages/productivity associated with face-to-face specialist visits. Greater savings are expected once we account for other costs such as avoided tests and visits and potential improved health outcomes associated with shorter wait times. Our findings are valuable for healthcare delivery decision-makers as they seek solutions to improve care in a patient-centred and efficient manner. PMID:27338880

Homogenisation of minimum and maximum air temperature in northern Portugal

NASA Astrophysics Data System (ADS)

Freitas, L.; Pereira, M. G.; Caramelo, L.; Mendes, L.; Amorim, L.; Nunes, L.

2012-04-01

Homogenization of minimum and maximum air temperature has been carried out for northern Portugal for the period 1941-2010. The database corresponds to the values of the monthly arithmetic averages calculated from daily values observed at stations within the network of stations managed by the national Institute of Meteorology (IM). Some of the weather stations of IM's network are collecting data for more than a century; however, during the entire observing period, some factors have affected the climate series and have to be considered such as, changes in the station surroundings and changes related to replacement of manually operated instruments. Besides these typical changes, it is of particular interest the station relocation to rural areas or to the urban-rural interface and the installation of automatic weather stations in the vicinity of the principal or synoptic stations with the aim of replacing them. The information from these relocated and new stations was merged to produce just one but representative time series of that site. This process starts at the end 90's and the information of the time series fusion process constitutes the set of metadata used. Two basic procedures were performed: (i) preliminary statistical and quality control analysis; and, (ii) detection and correction of problems of homogeneity. In the first case, was developed and used software for quality control, specifically dedicated for the detection of outliers, based on the quartile values of the time series itself. The analysis of homogeneity was performed using the MASH (Multiple Analysis of Series for Homogenisation) and HOMER, which is a software application developed and recently made available within the COST Action ES0601 (COST-ES0601, 2012). Both methods provide a fast quality control of the original data and were developed for automatic processing, analyzing, homogeneity testing and adjusting of climatological data, but manual usage is also possible. Obtained results with both methods will be presented, compared and discussed along with the results of the sensitivity tests performed with both methods. COST-ES0601, 2012: "ACTION COST-ES0601 - Advances in homogenisation methods of climate series: an integrated approach HOME". Available at http://www.homogenisation.org/v_02_15/ [accessed 3 January 2012].

An affordable RBCC-powered 2-stage small orbital payload transportation systems concept based on test-proven hardware

NASA Astrophysics Data System (ADS)

Escher, William J. D.

1998-01-01

Deriving from the initial planning activity of early 1965, which led to NASA's Advanced Space Transportation Program (ASTP), an early-available airbreathing/rocket combined propulsion system powered ``ultralight payload'' launcher was defined at the conceptual design level. This system, named the ``W Vehicle,'' was targeted to be a ``second generation'' successor to the original Bantam Lifter class, all-rocket powered systems presently being pursued by NASA and a selected set of its contractors. While this all-rocket vehicle is predicated on a fully expendable approach, the W-Vehicle system was to be a fully reusable 2-stage vehicle. The general (original) goal of the Bantam class of launchers was to orbit a 100 kg payload for a recurring per-launch cost of less than one million dollars. Reusability, as the case for larger vehicles focusing on single stage to orbit (SSTO) configurations, is considered the principal key to affordability. In the general context of a range of space transports, covering the payload range of 0.1 to 10 metric ton payloads, the W Vehicle concept-predicated mainly on ground- and flight-test proven hardware-is described in this paper, along with a nominal development schedule and budgetary estimate (recurring costs were not estimated).

Color management systems: methods and technologies for increased image quality

NASA Astrophysics Data System (ADS)

Caretti, Maria

1997-02-01

All the steps in the imaging chain -- from handling the originals in the prepress to outputting them on any device - - have to be well calibrated and adjusted to each other, in order to reproduce color images in a desktop environment as accurate as possible according to the original. Today most of the steps in the prepress production are digital and therefore it is realistic to believe that the color reproduction can be well controlled. This is true thanks to the last years development of fast, cost effective scanners, digital sources and digital proofing devices not the least. It is likely to believe that well defined tools and methods to control this imaging flow will lead to large cost and time savings as well as increased overall image quality. Until now, there has been a lack of good, reliable, easy-to- use systems (e.g. hardware, software, documentation, training and support) in an extent that has made them accessible to the large group of users of graphic arts production systems. This paper provides an overview of the existing solutions to manage colors in a digital pre-press environment. Their benefits and limitations are discussed as well as how they affect the production workflow and organization. The difference between a color controlled environment and one that is not is explained.

Nitrogen and Phosphorus Codoped Mesoporous Carbon Derived from Polypyrrole as Superior Metal-Free Electrocatalyst toward the Oxygen Reduction Reaction.

PubMed

Zhang, Zhengping; Sun, Junting; Dou, Meiling; Ji, Jing; Wang, Feng

2017-05-17

To replace high-cost platinum group metal (PGM) electrocatalysts for oxygen reduction reaction (ORR) that is the crucial cathode reaction in fuel cell technology and metal-air battery, the development of low-cost and high-efficiency non-PGM catalysts for ORR has attracted much attention during the past decades. As one of the promising candidates, N-doped carbon is highly desirable for its strong designability and outstanding catalytic activity and stability. In this work, a facile and rational strategy is demonstrated for preparation of N,P-codoped mesoporous carbon (N,P-MC) for ORR by the direct pyrolysis treatment of polypyrrole with phytic acid as P-dopant and polystyrene sphere as template. The resultant N,P-MC exhibits a mesoporous structure with the optimized ORR active sites originating from the N,P-codoping. Owing to these features, N,P-MC exhibits excellent ORR activity, remarkable electrochemical stability, and superior methanol tolerance, comparable or even better than that of commercial Pt/C catalyst. The origin of enhanced ORR performance can be attributed to both the increased active sites and the mesoporous structure, which is expected to guide the future preparation of more capable carbon-based electrocatalysts for oxygen reduction and other electrocatalytic application.

Assessing global fossil fuel availability in a scenario framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauer, Nico; Hilaire, Jérôme; Brecha, Robert J.

This study assesses global, long-term economic availability of coal, oil and gas within the Shared Socio-economic Pathway (SSP) scenario framework considering alternative assumptions as to highly uncertain future developments of technology, policy and the economy. Diverse sets of trajectories are formulated varying the challenges to mitigation and adaptation of climate change. The potential CO2 emissions from fossil fuels make it a crucial element subject to deep uncertainties. The analysis is based on a well-established data set of cost-quantity combinations that assumes favorable techno-economic developments, but ignores additional constraints on the extraction sector. This study significantly extends that analysis to includemore » alternative assumptions for the fossil fuel sector consistent with the SSP scenario families and applies these filters to the original data set, thus resulting in alternative cumulative fossil fuel availability curves. In a Middle-of-the-Road scenario, low cost fossil fuels embody carbon consistent with a RCP6.0 emission profile, if all the CO2 were emitted freely during the 21st century. In scenarios with high challenges to mitigation, the assumed embodied carbon in low-cost fossil fuels can trigger a RCP8.5 scenario; low mitigation challenges scenarios are still consistent with a RCP4.5 scenario.« less

19 CFR Appendix to Part 181 - Rules of Origin Regulations

Code of Federal Regulations, 2013 CFR

2013-04-01

... identified separately for sales promotion, marketing and after-sales service of goods on the financial... promotion, marketing and after-sales service of goods on the financial statements or cost accounts of the... sales promotion, marketing and after-sales service of goods on the financial statements or cost accounts...

19 CFR Appendix to Part 181 - Rules of Origin Regulations

Code of Federal Regulations, 2012 CFR

2012-04-01

... identified separately for sales promotion, marketing and after-sales service of goods on the financial... promotion, marketing and after-sales service of goods on the financial statements or cost accounts of the... sales promotion, marketing and after-sales service of goods on the financial statements or cost accounts...

19 CFR Appendix to Part 181 - Rules of Origin Regulations

Code of Federal Regulations, 2011 CFR

2011-04-01

... identified separately for sales promotion, marketing and after-sales service of goods on the financial... promotion, marketing and after-sales service of goods on the financial statements or cost accounts of the... sales promotion, marketing and after-sales service of goods on the financial statements or cost accounts...

19 CFR Appendix to Part 181 - Rules of Origin Regulations

Code of Federal Regulations, 2014 CFR

2014-04-01

... identified separately for sales promotion, marketing and after-sales service of goods on the financial... promotion, marketing and after-sales service of goods on the financial statements or cost accounts of the... sales promotion, marketing and after-sales service of goods on the financial statements or cost accounts...

Investigation of a Low Cost Sensor-Based Leak Detection System for Fence Line Applications

EPA Science Inventory

With recent technological advances, low-cost time-resolved sensors may become effective tools to support time-integrated passive sampling strategies by helping to decipher origin of emissions in real-time. As part of the Petroleum Refinery Risk and Technology Review, New Source P...

Approaches to Costing Adult Literacy Programmes, Especially in Africa

ERIC Educational Resources Information Center

Carr-Hill, Roy; Roberts, Fiona; Currie, Elizabeth

2010-01-01

Background: This study was originally prepared for the African Inter-Ministerial Conference on Literacy (September 2007) with the objective of analysing the costs of successful adult literacy programmes run both by government ministries, as well as international and national non-governmental organisations. Objectives: This study aims to increase…

What Do Information Technology Support Services Really Cost?

ERIC Educational Resources Information Center

Leach, Karen; Smallen, David

1998-01-01

A study examined the cost of information-technology support services in higher education institutions. The report describes the project's origins and work to date and reports initial results in three areas: network services, desktop repair services, and administrative information systems, looking in each case at economies of scale, outsourcing…

47 CFR 32.2000 - Instructions for telecommunications plant accounts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... accounting company, shall be accounted for at original cost, except that property, plant and equipment... less than $100,000 for Class A companies or $25,000 for Class B companies. (2) The accounting for... accounting for construction costs, the utility shall charge to the telecommunications plant accounts, where...

18 CFR 4.10 - Valuation data.

Code of Federal Regulations, 2012 CFR

2012-04-01

... PROJECT COSTS Determination of Fair Value of Constructed Projects, Under Section 23(a) of the Act § 4.10... Power Act that requires the determination of the fair value of a project already constructed, the... a statement to the effect that the actual legitimate original cost, or if not known, the estimated...

18 CFR 4.10 - Valuation data.

Code of Federal Regulations, 2014 CFR

2014-04-01

... PROJECT COSTS Determination of Fair Value of Constructed Projects, Under Section 23(a) of the Act § 4.10... Power Act that requires the determination of the fair value of a project already constructed, the... a statement to the effect that the actual legitimate original cost, or if not known, the estimated...

18 CFR 4.10 - Valuation data.

Code of Federal Regulations, 2013 CFR

2013-04-01

... PROJECT COSTS Determination of Fair Value of Constructed Projects, Under Section 23(a) of the Act § 4.10... Power Act that requires the determination of the fair value of a project already constructed, the... a statement to the effect that the actual legitimate original cost, or if not known, the estimated...

11 CFR 4.9 - Fees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... reformulate the original request in order to meet the requestor's needs at a lower cost. (4) The following is... for Presentation in Good Order. Computer Tapes Cost to process the request at the rate of $25.00 per... all arrangements for pick-up and delivery of the requested materials. The requestor shall pay all...

34 CFR 74.34 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following standards: (1) For equipment with a current per unit fair market value of $5000 or more, the... the cost of the original project or program to the current fair market value of the equipment. (2) If... the current fair market value of the equipment, plus any reasonable shipping or interim storage costs...

Axiomatic foundations for cost-effectiveness analysis.

PubMed

Canning, David

2013-12-01

We show that individual utilities can be measured in units of healthy life years. Social preferences over these life metric utilities are assumed to satisfy the Pareto principle, anonymity, and invariance to a change in origin. These axioms generate a utilitarian social welfare function implying the use of cost-effectiveness analysis in ordering health projects, based on maximizing the healthy years equivalents gained from a fixed health budget. For projects outside the health sector, our cost-effectiveness axioms imply a form of cost-benefit analysis where both costs and benefits are measured in equivalent healthy life years. Copyright © 2013 John Wiley & Sons, Ltd.

Zeolite-based Impedimetric Gas Sensor Device in Low-cost Technology for Hydrocarbon Gas Detection

PubMed Central

Reiß, Sebastian; Hagen, Gunter; Moos, Ralf

2008-01-01

Due to increasing environmental concerns the need for inexpensive selective gas sensors is increasing. This work deals with transferring a novel zeolite-based impedimetric hydrocarbon gas sensor principle, which has been originally manufactured in a costly combination of photolithography, thin-film processes, and thick-film processes to a low-cost technology comprising only thick-film processes and one electroplating step. The sensing effect is based on a thin chromium oxide layer between the interdigital electrodes and a Pt-loaded ZSM-5 zeolite film. When hydrocarbons are present in the sensor ambient, the electrical sensor impedance increases strongly and selectively. In the present work, the chromium oxide film is electroplated on Au screen-printed interdigital electrodes and then oxidized to Cr2O3. The electrode area is covered with the screen-printed zeolite. The sensor device is self-heated utilizing a planar platinum heater on the backside. The best sensor performance is obtained at a frequency of 3 Hz at around 350 °C. The good selectivity of the original sensor setup could be confirmed, but a strong cross-sensitivity to ammonia occurs, which might prohibit its original intention for use in automotive exhausts. PMID:27873966

Mobile Aerial Tracking and Imaging System (MATRIS) for Aeronautical Research

NASA Technical Reports Server (NTRS)

Banks, Daniel W.; Blanchard, R. C.; Miller, G. M.

2004-01-01

A mobile, rapidly deployable ground-based system to track and image targets of aeronautical interest has been developed. Targets include reentering reusable launch vehicles (RLVs) as well as atmospheric and transatmospheric vehicles. The optics were designed to image targets in the visible and infrared wavelengths. To minimize acquisition cost and development time, the system uses commercially available hardware and software where possible. The conception and initial funding of this system originated with a study of ground-based imaging of global aerothermal characteristics of RLV configurations. During that study NASA teamed with the Missile Defense Agency/Innovative Science and Technology Experimentation Facility (MDA/ISTEF) to test techniques and analysis on two Space Shuttle flights.

Feasibility study on the development of tough, moisture-resistant laminating resins

NASA Technical Reports Server (NTRS)

Brand, R. A.; Harrison, E. S.

1979-01-01

The potential of cyanate resins as replacement for epoxy resins in composites with graphite fiber reinforcement was investigated in an effort to provide improved moisture resistance and toughness in laminating systems at a projected cost, handleability, and processing requirements equivalent to 400 K (260 F) curing epoxies. Monomer synthesis, formulation, blending, resin preparation, catalysis studies, prepreg preparation, laminate fabrication, and testing are discussed. A graphite fiber reinforced laminate was developed with 95 percent retention of the original 363 K (180 F) flexural strength and 70 percent retention of the 363 K (180 F) short beam shear strength after 500 hour exposure to 95 + 7 relative humidity at 324 K (120 F).

A history of detachable coils: 1987-2012.

PubMed

Hui, Ferdinand K; Fiorella, David; Masaryk, Thomas J; Rasmussen, Peter A; Dion, Jacques E

2014-03-01

The development of detachable coils is one of the most pivotal developments in neurointervention, providing a tool that could be used to treat a wide variety of hemorrhagic stroke. From the original Guglielmi detachable coil, a number of different coil designs and delivery designs have evolved. This article reviews the history of commercially available detachable coils. A timeline of detachable coils was constructed and coil design philosophies were reviewed. A complete list of commercially available coils is presented in a timeline format. Detachable coil technology continues to evolve. Advances in construction and design have yielded products which may benefit patients in terms of safety, radiation dose reduction and cost of treatment. Continued evolution is expected, irrespective of competing disruptive technologies.

New developments concerning health care financial management.

PubMed

Drati, Nathan; Kleiner, Brian

2005-01-01

Managed care has become one of the leading developments in health care financial management, but ignorance and confusion surround its meaning and origins. Managed care seeks to reduced costs and increase profits while maintaining quality, yet the evidence that it is able to achieve these aims is mixed. The following analysis is a review of the events leading to the establishment of managed care and what it has become. Various terms and health care organizations involved in managed care are identified, with emphasis placed on the strengths and weaknesses of managed care programs. This analysis is performed to gain insight and better understanding of the direction health care financial management is headed in the 21st century.

Use of species-specific PCR for the identification of 10 sea cucumber species

NASA Astrophysics Data System (ADS)

Wen, Jing; Zeng, Ling

2014-11-01

We developed a species-specific PCR method to identify species among dehydrated products of 10 sea cucumber species. Ten reverse species-specific primers designed from the 16S rRNA gene, in combination with one forward universal primer, generated PCR fragments of ca. 270 bp length for each species. The specificity of the PCR assay was tested with DNA of samples of 21 sea cucumber species. Amplification was observed in specific species only. The species-specific PCR method we developed was successfully applied to authenticate species of commercial products of dehydrated sea cucumber, and was proven to be a useful, rapid, and low-cost technique to identify the origin of the sea cucumber product.

Management of Malignant Pleural Effusion: A Cost-Utility Analysis.

PubMed

Shafiq, Majid; Frick, Kevin D; Lee, Hans; Yarmus, Lonny; Feller-Kopman, David J

2015-07-01

Malignant pleural effusion (MPE) is associated with a significant impact on health-related quality of life. Palliative interventions abound, with varying costs and degrees of invasiveness. We examined the relative cost-utility of 5 therapeutic alternatives for MPE among adults. Original studies investigating the management of MPE were extensively researched, and the most robust and current data particularly those from the TIME2 trial were chosen to estimate event probabilities. Medicare data were used for cost estimation. Utility estimates were adapted from 2 original studies and kept consistent with prior estimations. The decision tree model was based on clinical guidelines and authors' consensus opinion. Primary outcome of interest was the incremental cost-effectiveness ratio for each intervention over a less effective alternative over an analytical horizon of 6 months. Given the paucity of data on rapid pleurodesis protocol, a sensitivity analysis was conducted to address the uncertainty surrounding its efficacy in terms of achieving long-term pleurodesis. Except for repeated thoracentesis (RT; least effective), all interventions had similar effectiveness. Tunneled pleural catheter was the most cost-effective option with an incremental cost-effectiveness ratio of $45,747 per QALY gained over RT, assuming a willingness-to-pay threshold of $100,000/QALY. Multivariate sensitivity analysis showed that rapid pleurodesis protocol remained cost-ineffective even with an estimated probability of lasting pleurodesis up to 85%. Tunneled pleural catheter is the most cost-effective therapeutic alternative to RT. This, together with its relative convenience (requiring neither hospitalization nor thoracoscopic procedural skills), makes it an intervention of choice for MPE.

Determination of geographical origin of alcoholic beverages using ultraviolet, visible and infrared spectroscopy: A review

NASA Astrophysics Data System (ADS)

Uríčková, Veronika; Sádecká, Jana

2015-09-01

The identification of the geographical origin of beverages is one of the most important issues in food chemistry. Spectroscopic methods provide a relative rapid and low cost alternative to traditional chemical composition or sensory analyses. This paper reviews the current state of development of ultraviolet (UV), visible (Vis), near infrared (NIR) and mid infrared (MIR) spectroscopic techniques combined with pattern recognition methods for determining geographical origin of both wines and distilled drinks. UV, Vis, and NIR spectra contain broad band(s) with weak spectral features limiting their discrimination ability. Despite this expected shortcoming, each of the three spectroscopic ranges (NIR, Vis/NIR and UV/Vis/NIR) provides average correct classification higher than 82%. Although average correct classification is similar for NIR and MIR regions, in some instances MIR data processing improves prediction. Advantage of using MIR is that MIR peaks are better defined and more easily assigned than NIR bands. In general, success in a classification depends on both spectral range and pattern recognition methods. The main problem still remains the construction of databanks needed for all of these methods.

KSC-2012-5907

NASA Image and Video Library

2012-10-19

VAN HORN, Texas – Blue Origin’s pusher escape system rockets its New Shepard crew capsule away from a simulated propulsion module launch pad at the company's West Texas launch site, demonstrating a key safety system for both suborbital and orbital flights. The pad escape test took the company's suborbital crew capsule to an altitude of 2,307 feet during the flight test before descending safely by parachute to a soft landing 1,630 feet away. The pusher escape system was designed and developed by Blue Origin to allow crew escape in the event of an emergency during any phase of ascent for its suborbital New Shepard system. As part of an incremental development program, the results of this test will shape the design of the escape system for the company's orbital biconic-shaped Space Vehicle. The system is expected to enable full reusability of the launch vehicle, which is different from NASA's previous launch escape systems that would pull a spacecraft away from its rocket before reaching orbit. The test was part of Blue Origin's work supporting its funded Space Act Agreement with NASA during Commercial Crew Development Round 2 CCDev2). Through initiatives like CCDev2, NASA is fostering the development of a U.S. commercial crew space transportation capability with the goal of achieving safe, reliable and cost-effective access to and from the International Space Station and low-Earth orbit. After the capability is matured and available to the government and other customers, NASA could contract to purchase commercial services to meet its station crew transportation needs. For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

Economic burden of follicular non-Hodgkin's lymphoma.

PubMed

Foster, Talia; Miller, Jeffrey D; Boye, Mark E; Russell, Mason W

2009-01-01

Follicular non-Hodgkin's lymphoma (FNHL), a slow-growing cancer of the immune system, constitutes about 15-30% of all incident non-Hodgkin's lymphoma in developed countries. Its incidence is rising worldwide. Patients can live many years, but FNHL is considered incurable. We systematically reviewed the English-language MEDLINE-indexed and non-indexed economic literature published in the past 10 years on FNHL, identifying 23 primary economic studies. The economic burden of FNHL is significant, but available data are generally limited to retrospective considerations of hospital-based direct treatment costs, with little information available regarding societal cost of illness. Most direct cost information originates from the US, with one estimate of $US36 000 for the per-patient incremental cost of FNHL care during the first year following diagnosis. The most studied treatment is rituximab, which may offer similar overall costs to fludarabine considering higher resource use with fludarabine complications. Nearly all cost-effectiveness models identified by this review evaluated rituximab for relapsed/refractory FNHL responding to chemotherapy induction. Rituximab is supported as a cost-effective addition to standard chemotherapy by two models in the UK and one in the US, as maintenance therapy instead of stem-cell transplant by one UK model, and as maintenance therapy instead of observation alone by one model each in France, Spain and Canada. The UK National Institute for Health and Clinical Excellence updated guidance on rituximab in February 2008, concluding that it is cost effective when added to induction chemotherapy, and when used as maintenance therapy. No studies of per-patient or national indirect costs of illness were identified, with the only study of indirect costs a Canadian survey documenting lost work productivity. Across all study types identified by our review, the most common focus was on the direct costs of rituximab. As new treatments for FNHL come to market, more real-life cost data are imperative to calculate their relative cost effectiveness.

Operational and Clinical Strategies to Address Drug Cost Containment in the Acute Care Setting.

PubMed

McConnell, Karen J; Guzman, Oscar E; Pherwani, Nisha; Spencer, Dustin D; Van Cura, Jennifer D; Shea, Katherine M

2017-01-01

To provide clinical and operational strategies to generate drug cost savings in the hospital setting. A search of the PubMed database was performed with no time limit through July 2016. All original prospective and retrospective studies, peer-reviewed guidelines, consensus statements, review articles, and accompanying references were evaluated for inclusion. Only articles published in the English language were included. Investigators reviewed 937 abstracts. The review of the literature showed that acute care hospitals are under increasing financial pressures, and the pharmacy is often responsible for opportunities to manage drug costs. The literature also indicated that cost-containment strategies in the acute care setting range from pharmacy-directed activities to initiatives requiring interdisciplinary collaboration and strategic planning. Hospital pharmacies should consider establishing an interdisciplinary team that is responsible for systematically reviewing drug cost implications and leading any initiatives that are deemed necessary. Acute care settings can use various operational and clinical strategies to lower their expenditures on high-cost drugs. Operational strategies include various activities that pharmacy staff implement related to contracting, purchasing, and inventory management. Clinical strategies utilize clinical pharmacists working with interdisciplinary teams to develop and maintain a formulary, implement established-use criteria for select drugs, use dose optimization, and implement other clinical tactics aimed at cost containment. After initiatives are implemented, assessing the outcomes of the initiatives is important to determine how successful they were at lowering costs safely and effectively. Acute care hospitals can use various operational and clinical strategies to lower overall drug costs. A systematic stepwise approach is recommended to ensure relevant drugs are regularly reviewed and addressed as needed. © 2016 Pharmacotherapy Publications, Inc.

The Irish potato famine pathogen Phytophthora infestans originated in central Mexico rather than the Andes

USDA-ARS?s Scientific Manuscript database

Phytophthora infestans is a destructive plant pathogen best known for causing the disease that triggered the Irish potato famine and continues to be the most costly potato pathogen to manage worldwide. Identification of its elusive center of origin is critical to understanding the mechanisms of repe...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 47.305-3 - F.o.b. origin solicitations.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., or freight station. (b) The requirement that the offeror furnish the following information with the... overall cost.) (4)(i) The quantity of supplies to be shipped from each shipping point. (ii) The... to the point where the line-haul rate is applicable. (d) When delivery is f.o.b. origin, freight...

48 CFR 47.305-3 - F.o.b. origin solicitations.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., or freight station. (b) The requirement that the offeror furnish the following information with the... overall cost.) (4)(i) The quantity of supplies to be shipped from each shipping point. (ii) The... to the point where the line-haul rate is applicable. (d) When delivery is f.o.b. origin, freight...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 47.305-3 - F.o.b. origin solicitations.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., or freight station. (b) The requirement that the offeror furnish the following information with the... overall cost.) (4)(i) The quantity of supplies to be shipped from each shipping point. (ii) The... to the point where the line-haul rate is applicable. (d) When delivery is f.o.b. origin, freight...

48 CFR 47.305-3 - F.o.b. origin solicitations.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., or freight station. (b) The requirement that the offeror furnish the following information with the... overall cost.) (4)(i) The quantity of supplies to be shipped from each shipping point. (ii) The... to the point where the line-haul rate is applicable. (d) When delivery is f.o.b. origin, freight...

19 CFR 10.916 - Value of materials.

Code of Federal Regulations, 2014 CFR

2014-04-01

... added to the value of the originating material: (i) The costs of freight, insurance, packing, and all... 19 Customs Duties 1 2014-04-01 2014-04-01 false Value of materials. 10.916 Section 10.916 Customs... Rules of Origin § 10.916 Value of materials. (a) Calculating the value of materials. Except as provided...

19 CFR 10.3016 - Value of materials.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) of this section, may be added to the value of the originating material: (i) The costs of freight... 19 Customs Duties 1 2014-04-01 2014-04-01 false Value of materials. 10.3016 Section 10.3016... Promotion Agreement Rules of Origin § 10.3016 Value of materials. (a) Calculating the value of materials...

19 CFR 10.916 - Value of materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

... added to the value of the originating material: (i) The costs of freight, insurance, packing, and all... 19 Customs Duties 1 2013-04-01 2013-04-01 false Value of materials. 10.916 Section 10.916 Customs... Rules of Origin § 10.916 Value of materials. (a) Calculating the value of materials. Except as provided...

19 CFR 10.916 - Value of materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

... added to the value of the originating material: (i) The costs of freight, insurance, packing, and all... 19 Customs Duties 1 2012-04-01 2012-04-01 false Value of materials. 10.916 Section 10.916 Customs... Rules of Origin § 10.916 Value of materials. (a) Calculating the value of materials. Except as provided...

19 CFR 10.3016 - Value of materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

... paragraph (a) of this section, may be added to the value of the originating material: (i) The costs of... 19 Customs Duties 1 2013-04-01 2013-04-01 false Value of materials. 10.3016 Section 10.3016... Promotion Agreement Rules of Origin § 10.3016 Value of materials. (a) Calculating the value of materials...

Electric Power Engineering Cost Predicting Model Based on the PCA-GA-BP

NASA Astrophysics Data System (ADS)

Wen, Lei; Yu, Jiake; Zhao, Xin

2017-10-01

In this paper a hybrid prediction algorithm: PCA-GA-BP model is proposed. PCA algorithm is established to reduce the correlation between indicators of original data and decrease difficulty of BP neural network in complex dimensional calculation. The BP neural network is established to estimate the cost of power transmission project. The results show that PCA-GA-BP algorithm can improve result of prediction of electric power engineering cost.

Total cost of ownership: the role of clinical engineering.

PubMed

Hockel, Dale; Kintner, Michael

2014-06-01

Hospitals often incur substantial hidden costs associated with service agreements that they enter into with original equipment manufacturers at the time of equipment purchase. Hospitals should perform an analysis of the total cost of ownership (TCO) of their organizations' medical equipment to identify opportunities for performance improvement and savings. The findings of the TCO analysis can point to areas where clinical engineering service management can be improved through investments in technology, training, and teamwork.

Defense Acquisition Research Journal. Volume 18, Number 3, Issue 59, July 2011

DTIC Science & Technology

2011-07-01

cost estimate. Thus, it is important to adjust the original cost estimates reflected in the first SAR to account for the changes in the quan- tity...effect on the model (Figure 6). To account for this possibility, taBLE 4. oLS RESuLtS: PRoCuREMENt CoSt GRoWtH vS. aCtuaL CoNCuRRENCY Estimate Std...Kelley & Watkins, 1998). The pattern in which a relatively small proportion of programs account for virtually all of MDAP cost growth cannot be

Insecticide resistance and nutrition interactively shape life-history parameters in German cockroaches

NASA Astrophysics Data System (ADS)

Jensen, Kim; Ko, Alexander E.; Schal, Coby; Silverman, Jules

2016-06-01

Fitness-related costs of evolving insecticide resistance have been reported in a number of insect species, but the interplay between evolutionary adaptation to insecticide pressure and variable environmental conditions has received little attention. We provisioned nymphs from three German cockroach (Blattella germanica L.) populations, which differed in insecticide resistance, with either nutritionally rich or poor (diluted) diet throughout their development. One population was an insecticide-susceptible laboratory strain; the other two populations originated from a field-collected indoxacarb-resistant population, which upon collection was maintained either with or without further selection with indoxacarb. We then measured development time, survival to the adult stage, adult body size, and results of a challenge with indoxacarb. Our results show that indoxacarb resistance and poor nutritional condition increased development time and lowered adult body size, with reinforcing interactions. We also found lower survival to the adult stage in the indoxacarb-selected population, which was exacerbated by poor nutrition. In addition, nutrition imparted a highly significant effect on indoxacarb susceptibility. This study exemplifies how poor nutritional condition can aggravate the life-history costs of resistance and elevate the detrimental effects of insecticide exposure, demonstrating how environmental conditions and resistance may interactively impact individual fitness and insecticide efficacy.

Preclinical drug development.

PubMed

Brodniewicz, Teresa; Grynkiewicz, Grzegorz

2010-01-01

Life sciences provide reasonably sound prognosis for a number and nature of therapeutic targets on which drug design could be based, and search for new chemical entities--future new drugs, is now more than ever based on scientific principles. Nevertheless, current very long and incredibly costly drug discovery and development process is very inefficient, with attrition rate spanning from many thousands of new chemical structures, through a handful of validated drug leads, to single successful new drug launches, achieved in average after 13 years, with compounded cost estimates from hundreds of thousands to over one billion US dollars. Since radical pharmaceutical innovation is critically needed, number of new research projects concerning this area is steeply rising outside of big pharma industry--both in academic environment and in small private companies. Their prospective success will critically depend on project management, which requires combined knowledge of scientific, technical and legal matters, comprising regulations concerning admission of new drug candidates to be subjects of clinical studies. This paper attempts to explain basic rules and requirements of drug development within preclinical study period, in case of new chemical entities of natural or synthetic origin, which belong to low molecular weight category.

Patents and profits: A disparity of manufacturing margins in the tenofovir value chain.

PubMed

Walwyn, David

2013-03-01

Registered in 2001, tenofovir disoproxil fumarate (TDF) has quickly become a mainstay of first line regimens for the treatment of HIV. Initially only available in developed countries at a cost of US$5 000 per person per year (ppy), Gilead's Access Programme (GAP) has extended the use of the product to 2.4 million patients in low and middle income countries. The programme has two components: distribution of the branded product at reduced prices and licensing partnerships with generic manufacturers. The licensing partnerships now supply 75% of the market by volume, at a treatment cost of US$57 ppy (1% of the branded cost). From Gilead's perspective, GAP must be considered a huge success. It has enabled the company to maintain high prices in developed countries whilst reducing its input costs and deflecting criticism of its failure to provide essential medicines for the poor, hence risking the possibility of compulsory licensing. Over the period 2001 to 2011, TDF in its various forms has generated for Gilead more than US$31 billion revenue at a gross margin of 80%, equivalent to a gross profit of US$25 billion. Analysis of the TDF value chain, from preparation of the active pharmaceutical ingredient (API) to sale of the formulated product, shows that manufacturing margins are highly skewed in favour of the originator, with the latter's profit being US$3.2 billion vs. US$4 million for API manufacturers and US$39 million for formulators (2011). The data argues for a more rational approach to drug pricing including possible regulation in developed countries and more sustainable margins for the generic producers.

Managing major data of genetically modified mice: from scientific demands to legal obligations.

PubMed

Staudt, Michael; Trauth, Jürgen; Hindi, Iris El; Galuschka, Claudia; Sitek, Dagmar; Schenkel, Johannes

2012-10-01

The number of genetically modified mice is increasing rapidly. Several limitations when working with these animals are to be considered: small colonies, the continued danger of loss, often a limited breeding-success, the need to keep those mutants in stock, difficult and costly import-procedures, and also a major (scientific) value of those mutants often available only with major restrictions. To gather relevant information about all active and archived genetically modified mouse lines available in-house (>1.500) and to deal with a unique resource for several, quite different purposes, a data base was developed enabling optimum knowledge management and easy access. The data base covers also legal restraints and is being linked with the institutional publication repository. To identify the lines available detailed information is provided for each line, as the international designation, a short name, the characterization/description, and the genetic modification including the technique used therefore. The origin of the mutation (gene-ID# and donor organism), the origin of regulatory elements and their donors are listed as well as the genetic background, back-cross generation, phenotype, possible publications, keywords, and some in-house information. Also aspects of animal welfare, obligations to record genetically modified organisms, and technology transfer are displayed; the latter to make licenses possible (if legally permitted). Material transfer agreements, patents, or legal restrictions are listed. This data base helps to avoid double-imports, saves animals and costs since a redundant generation or import can be omitted. However, this is a contribution to the 3R principles developed by Russell and Burch.

Improved Spacecraft Materials for Radiation Shielding

NASA Technical Reports Server (NTRS)

Wilson, J. W.; Shinn, J. L.; Singleterry, R. C.; Tai, H.; Thibeault, S. A.; Simonsen, L. C.; Cucinotta, F. A.; Miller, J.

1999-01-01

In the execution of this proposal, we will first examine current and developing spacecraft materials and evaluate their ability to attenuate adverse biological mutational events in mammalian cell systems and reduce the rate of cancer induction in mice harderian glands as a measure of their protective qualities. The HZETRN code system will be used to generate a database on GCR attenuation in each material. If a third year of funding is granted, the most promising and mission-specific materials will be used to study the impact on mission cost for a typical Mars mission scenario as was planned in our original two year proposal at the original funding level. The most promising candidate materials will be further tested as to their transmission characteristics in Fe and Si ion beams to evaluate the accuracy of the HZETRN transmission factors. Materials deemed critical to mission success may also require testing as well as materials developed by industry for their radiation protective qualities (e.g., Physical Sciences Inc.) A study will be made of designing polymeric materials and composite materials with improved radiation shielding properties as well as the possible improvement of mission-specific materials.

Simulating cloud environment for HIS backup using secret sharing.

PubMed

Kuroda, Tomohiro; Kimura, Eizen; Matsumura, Yasushi; Yamashita, Yoshinori; Hiramatsu, Haruhiko; Kume, Naoto

2013-01-01

In the face of a disaster hospitals are expected to be able to continue providing efficient and high-quality care to patients. It is therefore crucial for hospitals to develop business continuity plans (BCPs) that identify their vulnerabilities, and prepare procedures to overcome them. A key aspect of most hospitals' BCPs is creating the backup of the hospital information system (HIS) data at multiple remote sites. However, the need to keep the data confidential dramatically increases the costs of making such backups. Secret sharing is a method to split an original secret message so that individual pieces are meaningless, but putting sufficient number of pieces together reveals the original message. It allows creation of pseudo-redundant arrays of independent disks for privacy-sensitive data over the Internet. We developed a secret sharing environment for StarBED, a large-scale network experiment environment, and evaluated its potential and performance during disaster recovery. Simulation results showed that the entire main HIS database of Kyoto University Hospital could be retrieved within three days even if one of the distributed storage systems crashed during a disaster.

Modelling of wildlife migrations and its economic impacts

NASA Astrophysics Data System (ADS)

Myšková, Kateřina; Žák, Jaroslav

2013-10-01

Natural wildlife migrations are often disrupted by the construction of line structures, especially freeways. Various overpasses and underpasses (migration objects) are being designed to enable species to pass through line structures. The newly developed original procedure for the quantification of the utility of migration objects (migration potentials) and sections of line structures retrieves the deficiencies of the previous ones. The procedure has been developed under bulk information obtained by monitoring migrations using camera system and spy games. The log-normal distribution functions are used. The procedure for the evaluation of the probability of the permeability of the line structures sectors is also presented. The above mentioned procedures and algorithms can be used while planning, preparing, constructing or verifying the measures to assure the permeability of line structures for selected feral species. Using the procedures can significantly reduce financial costs and improve the permeability. When the migration potentials are correctly determined and the whole sector is taken into account for the migrations, some originally designed objects may be found to be redundant and not building them will bring financial savings.

Stochastic Liouville equations for femtosecond stimulated Raman spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwalla, Bijay Kumar; Ando, Hideo; Dorfman, Konstantin E.

2015-01-14

Electron and vibrational dynamics of molecules are commonly studied by subjecting them to two interactions with a fast actinic pulse that prepares them in a nonstationary state and after a variable delay period T, probing them with a Raman process induced by a combination of a broadband and a narrowband pulse. This technique, known as femtosecond stimulated Raman spectroscopy (FSRS), can effectively probe time resolved vibrational resonances. We show how FSRS signals can be modeled and interpreted using the stochastic Liouville equations (SLE), originally developed for NMR lineshapes. The SLE provide a convenient simulation protocol that can describe complex dynamicsmore » caused by coupling to collective bath coordinates at much lower cost than a full dynamical simulation. The origin of the dispersive features that appear when there is no separation of timescales between vibrational variations and the dephasing time is clarified.« less

Wheat forecast economics effect study. [value of improved information on crop inventories, production, imports and exports

NASA Technical Reports Server (NTRS)

Mehra, R. K.; Rouhani, R.; Jones, S.; Schick, I.

1980-01-01

A model to assess the value of improved information regarding the inventories, productions, exports, and imports of crop on a worldwide basis is discussed. A previously proposed model is interpreted in a stochastic control setting and the underlying assumptions of the model are revealed. In solving the stochastic optimization problem, the Markov programming approach is much more powerful and exact as compared to the dynamic programming-simulation approach of the original model. The convergence of a dual variable Markov programming algorithm is shown to be fast and efficient. A computer program for the general model of multicountry-multiperiod is developed. As an example, the case of one country-two periods is treated and the results are presented in detail. A comparison with the original model results reveals certain interesting aspects of the algorithms and the dependence of the value of information on the incremental cost function.

The lustering of TBC-2

NASA Astrophysics Data System (ADS)

Diver, Richard B.; Jones, Scott; Robb, Stacy; Mahoney, A. Rod

1995-05-01

Two test bed concentrators (TBC's) were designed to provide high-performance test beds for advanced solar receivers and converters. However, the second-surface silvered-glass mirror facets on the TBC's, which were originally manufactured by the Jet Propulsion Laboratory, have experienced severe silver corrosion. To restore reflectance, TBC-2 was refurbished with a lustering technique developed at Sandia National Laboratories. In the lustering technique, second-surface silvered thin-glass mirrors were applied over the corroded facets, thereby increasing the dish reflectivity and raising the available power of TBC-2 from approximately 70 to 78 kW(sub t). Degradation of the original optical accuracy of the TBC facets was determined to be minimal. Lustering was chosen over facet replacement because of the lower cost, the anticipated improvement in corrosion resistance, and the shorter project duration. This report includes background information, details of the lustering process, and test results from TBC-2 characterization, both before and after lustering.

Enhancing Hi-C data resolution with deep convolutional neural network HiCPlus.

PubMed

Zhang, Yan; An, Lin; Xu, Jie; Zhang, Bo; Zheng, W Jim; Hu, Ming; Tang, Jijun; Yue, Feng

2018-02-21

Although Hi-C technology is one of the most popular tools for studying 3D genome organization, due to sequencing cost, the resolution of most Hi-C datasets are coarse and cannot be used to link distal regulatory elements to their target genes. Here we develop HiCPlus, a computational approach based on deep convolutional neural network, to infer high-resolution Hi-C interaction matrices from low-resolution Hi-C data. We demonstrate that HiCPlus can impute interaction matrices highly similar to the original ones, while only using 1/16 of the original sequencing reads. We show that the models learned from one cell type can be applied to make predictions in other cell or tissue types. Our work not only provides a computational framework to enhance Hi-C data resolution but also reveals features underlying the formation of 3D chromatin interactions.

Portable Parallel Programming for the Dynamic Load Balancing of Unstructured Grid Applications

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Das, Sajal K.; Harvey, Daniel; Oliker, Leonid

1999-01-01

The ability to dynamically adapt an unstructured -rid (or mesh) is a powerful tool for solving computational problems with evolving physical features; however, an efficient parallel implementation is rather difficult, particularly from the view point of portability on various multiprocessor platforms We address this problem by developing PLUM, tin automatic anti architecture-independent framework for adaptive numerical computations in a message-passing environment. Portability is demonstrated by comparing performance on an SP2, an Origin2000, and a T3E, without any code modifications. We also present a general-purpose load balancer that utilizes symmetric broadcast networks (SBN) as the underlying communication pattern, with a goal to providing a global view of system loads across processors. Experiments on, an SP2 and an Origin2000 demonstrate the portability of our approach which achieves superb load balance at the cost of minimal extra overhead.

Costs and Financing in Open Schools

ERIC Educational Resources Information Center

Du Vivier, Ed

2008-01-01

These self-instructional resources have their origins in a workshop on the Costs and Financing of Open & Distance Learning which took place from 6-10 August 2007 in Gabarone, Botswana. The workshop was sponsored by the Commonwealth of Learning (COL) with the overall aim of building capacity to plan, negotiate and manage appropriate financial…

Assessing the Cost-Effectiveness of Family Connections

ERIC Educational Resources Information Center

DePanfilis, Diane; Dubowitz, Howard; Kunz, James

2008-01-01

Objective: To assess the cost-effectiveness of two alternate forms of Family Connections (FC), a child neglect prevention program, in relation to changes in risk and protective factors and improvements in child safety and behavioral outcomes. Methods: In the original FC study, a sample of 154 families (473 children) in a poor, urban neighborhood,…

76 FR 39474 - Monthly Median Cost of Funds Reporting, and Publication of Cost of Funds Indices

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

... commenter noted that there are ``numerous adjustable interest rate home loans including loans sold to the... original indices; and (B) the substitution of the new indices will result in an interest rate substantially... direct substitute because of recent changes in interest rate relationships resulting from monetary policy...

Army Corps of Engineers: Cost Increases in Flood Control Projects and Improving Communication with Nonfederal Sponsors

DTIC Science & Technology

2013-12-01

such poor condition that it had to have major rehabilitation work performed. Work to fix the deteriorated tunnel cost $10 million more than had...originally been estimated.19 Corps officials on the Little Calumet project said during construction they encountered a former landfill along one portion

Low cost label-free live cell imaging for biological samples

NASA Astrophysics Data System (ADS)

Seniya, C.; Towers, C. E.; Towers, D. P.

2017-02-01

This paper reports the progress to develop a practical phase measuring microscope offering new capabilities in terms of phase measurement accuracy and quantification of cell:cell interactions over the longer term. A novel, low cost phase interference microscope for imaging live cells (label-free) is described. The method combines the Zernike phase contrast approach with a dual mirror design to enable phase modulation between the scattered and un-scattered optical fields. Two designs are proposed and demonstrated, one of which retains the common path nature of Zernike's original microscopy concept. In both setups the phase shift is simple to control via a piezoelectric driven mirror in the back focal plane of the imaging system. The approach is significantly cheaper to implement than those based on spatial light modulators (SLM) at approximately 20% of the cost. A quantitative assessment of the performance of a set of phase shifting algorithms is also presented, specifically with regard to broad bandwidth illumination in phase contrast microscopy. The simulation results show that the phase measurement accuracy is strongly dependent on the algorithm selected and the optical path difference in the sample.

Development of advanced manufacturing technologies for low cost hydrogen storage vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leavitt, Mark; Lam, Patrick

2014-12-29

The U.S. Department of Energy (DOE) defined a need for low-cost gaseous hydrogen storage vessels at 700 bar to support cost goals aimed at 500,000 units per year. Existing filament winding processes produce a pressure vessel that is structurally inefficient, requiring more carbon fiber for manufacturing reasons, than would otherwise be necessary. Carbon fiber is the greatest cost driver in building a hydrogen pressure vessel. The objective of this project is to develop new methods for manufacturing Type IV pressure vessels for hydrogen storage with the purpose of lowering the overall product cost through an innovative hybrid process of optimizingmore » composite usage by combining traditional filament winding (FW) and advanced fiber placement (AFP) techniques. A numbers of vessels were manufactured in this project. The latest vessel design passed all the critical tests on the hybrid design per European Commission (EC) 79-2009 standard except the extreme temperature cycle test. The tests passed include burst test, cycle test, accelerated stress rupture test and drop test. It was discovered the location where AFP and FW overlap for load transfer could be weakened during hydraulic cycling at 85°C. To design a vessel that passed these tests, the in-house modeling software was updated to add capability to start and stop fiber layers to simulate the AFP process. The original in-house software was developed for filament winding only. Alternative fiber was also investigated in this project, but the added mass impacted the vessel cost negatively due to the lower performance from the alternative fiber. Overall the project was a success to show the hybrid design is a viable solution to reduce fiber usage, thus driving down the cost of fuel storage vessels. Based on DOE’s baseline vessel size of 147.3L and 91kg, the 129L vessel (scaled to DOE baseline) in this project shows a 32% composite savings and 20% cost savings when comparing Vessel 15 hybrid design and the Quantum baseline all filament wound vessel. Due to project timing, there was no additional time available to fine tune the design to improve the load transfer between AFP and FW. Further design modifications will likely help pass the extreme temperature cycle test, the remaining test that is critical to the hybrid design.« less

An analysis of UK waste minimization clubs: key requirements for future cost effective developments.

PubMed

Phillips, P S; Pratt, R M; Pike, K

2001-01-01

The UK waste strategy is based upon use of the best practicable environmental option (BPEO), by those making waste management decisions. BPEO is supported by the use of the waste hierarchy, with its range of preferable options for dealing with waste, and the proximity principle, where waste is treated/disposed of as close to its point of origin as possible. The national waste strategy emphasizes the key role of waste minimization and encourages industry, commerce and the public to move towards sustainable waste management practice for economic and environmental reasons. Waste minimization clubs have been used, since the early 1990s, to demonstrate to industry/commerce that reducing waste production can lead to significant financial savings. There have been around 75 such clubs in the UK and they receive support from a wide range of agencies, including the Environmental Technology Best Practice Program. The early Demonstration Clubs had significant savings to cost ratios, e.g. Aire and Calder at 8.4, but had very high costs, e.g. Aire and Calder at 400,000 pounds. It is acknowledged that the number of clubs will have to be approximately doubled in the next few years so as to have an adequate coverage of the UK. There are at present, marked regional variations in club development and cognizance needs to be taken, by facilitators, of the need for extensive coverage of the UK. Future clubs will probably have to operate in a financially constrained climate and they need to be designed to deliver significant savings and waste reduction at low cost. To aid future club design, final reports of all projects should report in a standard manner so that cost benefit analysis can be used to inform facilitators about the most effective club type. rights reserved.

Survey and Chart Review to Estimate Medicare Cost Savings for Home Health as an Alternative to Hospital Admission Following Emergency Department Treatment.

PubMed

Crowley, Christopher; Stuck, Amy R; Martinez, Tracy; Wittgrove, Alan C; Zeng, Feng; Brennan, Jesse J; Chan, Theodore C; Killeen, James P; Castillo, Edward M

2016-12-01

Almost 70% of hospital admissions for Medicare beneficiaries originate in the emergency department (ED). Research suggests that some of these patients' needs may be better met through home-based care options after evaluation and treatment in the ED. We sought to estimate Medicare cost savings resulting from using the Home Health benefit to provide treatment, when appropriate, as an alternative to inpatient admission from the ED. This is a prospective study of patients admitted from the ED. A survey tool was used to query both emergency physicians (EPs) and patient medical record data to identify potential candidates and treatments for home-based care alternatives. Patient preferences were also surveyed. Cost savings were estimated by developing a model of Medicare Home Health to serve as a counterpart to the actual hospital-based care. EPs identified 40% of the admitted patients included in the study as candidates for home-based care. The top three major diagnostic categories included diseases and disorders of the respiratory system, digestive system, and skin. Services included intravenous hydration, intravenous antibiotics, and laboratory testing. The average estimated cost savings between the Medicare inpatient reimbursement and the Home Health counterpart was approximately $4000. Of the candidate patients surveyed, 79% indicated a preference for home-based care after treatment in the ED. Some Medicare beneficiaries could be referred to Home Health from the ED with a concomitant reduction in Medicare expenditures. Additional studies are needed to compare outcomes, develop the logistical pathways, and analyze infrastructure costs and incentives to enable Medicare Home Health options from the ED. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Low-cost far infrared bolometer camera for automotive use

NASA Astrophysics Data System (ADS)

Vieider, Christian; Wissmar, Stanley; Ericsson, Per; Halldin, Urban; Niklaus, Frank; Stemme, Göran; Källhammer, Jan-Erik; Pettersson, Håkan; Eriksson, Dick; Jakobsen, Henrik; Kvisterøy, Terje; Franks, John; VanNylen, Jan; Vercammen, Hans; VanHulsel, Annick

2007-04-01

A new low-cost long-wavelength infrared bolometer camera system is under development. It is designed for use with an automatic vision algorithm system as a sensor to detect vulnerable road users in traffic. Looking 15 m in front of the vehicle it can in case of an unavoidable impact activate a brake assist system or other deployable protection system. To achieve our cost target below €100 for the sensor system we evaluate the required performance and can reduce the sensitivity to 150 mK and pixel resolution to 80 x 30. We address all the main cost drivers as sensor size and production yield along with vacuum packaging, optical components and large volume manufacturing technologies. The detector array is based on a new type of high performance thermistor material. Very thin Si/SiGe single crystal multi-layers are grown epitaxially. Due to the resulting valence barriers a high temperature coefficient of resistance is achieved (3.3%/K). Simultaneously, the high quality crystalline material provides very low 1/f-noise characteristics and uniform material properties. The thermistor material is transferred from the original substrate wafer to the read-out circuit using adhesive wafer bonding and subsequent thinning. Bolometer arrays can then be fabricated using industry standard MEMS process and materials. The inherently good detector performance allows us to reduce the vacuum requirement and we can implement wafer level vacuum packaging technology used in established automotive sensor fabrication. The optical design is reduced to a single lens camera. We develop a low cost molding process using a novel chalcogenide glass (GASIR®3) and integrate anti-reflective and anti-erosion properties using diamond like carbon coating.

Revisions to the JDL data fusion model

NASA Astrophysics Data System (ADS)

Steinberg, Alan N.; Bowman, Christopher L.; White, Franklin E.

1999-03-01

The Data Fusion Model maintained by the Joint Directors of Laboratories (JDL) Data Fusion Group is the most widely-used method for categorizing data fusion-related functions. This paper discusses the current effort to revise the expand this model to facilitate the cost-effective development, acquisition, integration and operation of multi- sensor/multi-source systems. Data fusion involves combining information - in the broadest sense - to estimate or predict the state of some aspect of the universe. These may be represented in terms of attributive and relational states. If the job is to estimate the state of a people, it can be useful to include consideration of informational and perceptual states in addition to the physical state. Developing cost-effective multi-source information systems requires a method for specifying data fusion processing and control functions, interfaces, and associate databases. The lack of common engineering standards for data fusion systems has been a major impediment to integration and re-use of available technology: current developments do not lend themselves to objective evaluation, comparison or re-use. This paper reports on proposed revisions and expansions of the JDL Data FUsion model to remedy some of these deficiencies. This involves broadening the functional model and related taxonomy beyond the original military focus, and integrating the Data Fusion Tree Architecture model for system description, design and development.

Liquid crystal film development for plasma mirrors and waveplates

NASA Astrophysics Data System (ADS)

Cochran, G. E.; Poole, P. L.; Willis, C.; Hanna, R. J.; Pytel, K.; Sullivan, K. S.; Andereck, C. D.; Schumacher, D. W.

2015-11-01

Many laser-plasma phenomena currently under study depend critically on the quality of the pulse contrast. Costly sacrificial plasma mirrors are now commonly used to improve the temporal laser contrast before target interaction, especially for ion acceleration where high contrast is necessary to achieve interesting new mechanisms. Liquid crystal films were originally developed as variable thickness thin-film targets, and were demonstrated for this purpose in. Varying film formation parameters such as volume, temperature, and draw speed allows thickness control between 10 nm and several 10s of microns, in-situ and under vacuum. Development since that initial work has allowed large area films to be formed, several cm2 in extent, with the same thickness range. The molecular flatness of a freely suspended film renders these films excellent low-cost plasma mirrors, given appropriate formation control. Additionally, the birefringence of the liquid crystal used here permits these films to be used as large area zero-order waveplates at the appropriate thickness. Details on the current state of liquid crystal film application development, including a >1 Hz small area film formation device, will be presented. This work was performed with support from the DARPA PULSE program through a grant from AMRDEC and by the NNSA under contract DE-NA0001976.

Proceedings of the Workshop on the Scientific Applications of Clocks in Space

NASA Technical Reports Server (NTRS)

Maleki, Lute (Editor)

1997-01-01

The Workshop on Scientific Applications of Clocks in space was held to bring together scientists and technologists interested in applications of ultrastable clocks for test of fundamental theories, and for other science investigations. Time and frequency are the most precisely determined of all physical parameters, and thus are the required tools for performing the most sensitive tests of physical theories. Space affords the opportunity to make measurement, parameters inaccessible on Earth, and enables some of the most original and sensitive tests of fundamental theories. In the past few years, new developments in clock technologies have pointed to the opportunity for flying ultrastable clocks in support of science investigations of space missions. This development coincides with the new NASA paradigm for space flights, which relies on frequent, low-cost missions in place of the traditional infrequent and high-cost missions. The heightened interest in clocks in space is further advanced by new theoretical developments in various fields. For example, recent developments in certain Grand Unified Theory formalisms have vastly increased interest in fundamental tests of gravitation physics with clocks. The workshop included sessions on all related science including relativity and gravitational physics, cosmology, orbital dynamics, radio science, geodynamics, and GPS science and others, as well as a session on advanced clock technology.

A New Algorithm to Diagnose Atrial Ectopic Origin from Multi Lead ECG Systems - Insights from 3D Virtual Human Atria and Torso

PubMed Central

Alday, Erick A. Perez; Colman, Michael A.; Langley, Philip; Butters, Timothy D.; Higham, Jonathan; Workman, Antony J.; Hancox, Jules C.; Zhang, Henggui

2015-01-01

Rapid atrial arrhythmias such as atrial fibrillation (AF) predispose to ventricular arrhythmias, sudden cardiac death and stroke. Identifying the origin of atrial ectopic activity from the electrocardiogram (ECG) can help to diagnose the early onset of AF in a cost-effective manner. The complex and rapid atrial electrical activity during AF makes it difficult to obtain detailed information on atrial activation using the standard 12-lead ECG alone. Compared to conventional 12-lead ECG, more detailed ECG lead configurations may provide further information about spatio-temporal dynamics of the body surface potential (BSP) during atrial excitation. We apply a recently developed 3D human atrial model to simulate electrical activity during normal sinus rhythm and ectopic pacing. The atrial model is placed into a newly developed torso model which considers the presence of the lungs, liver and spinal cord. A boundary element method is used to compute the BSP resulting from atrial excitation. Elements of the torso mesh corresponding to the locations of the placement of the electrodes in the standard 12-lead and a more detailed 64-lead ECG configuration were selected. The ectopic focal activity was simulated at various origins across all the different regions of the atria. Simulated BSP maps during normal atrial excitation (i.e. sinoatrial node excitation) were compared to those observed experimentally (obtained from the 64-lead ECG system), showing a strong agreement between the evolution in time of the simulated and experimental data in the P-wave morphology of the ECG and dipole evolution. An algorithm to obtain the location of the stimulus from a 64-lead ECG system was developed. The algorithm presented had a success rate of 93%, meaning that it correctly identified the origin of atrial focus in 75/80 simulations, and involved a general approach relevant to any multi-lead ECG system. This represents a significant improvement over previously developed algorithms. PMID:25611350

The Integration of COTS/GOTS within NASA's HST Command and Control System

NASA Technical Reports Server (NTRS)

Pfarr, Thomas; Reis, James E.

2001-01-01

NASA's mission critical Hubble Space Telescope (HST) command and control system has been re-engineered with commercial-off-the-shelf (COTS/GOTS) and minimal custom code. This paper focuses on the design of this new HST Control Center System (CCS) and the lessons learned throughout its development. CCS currently utilizes more than 30 COTS/GOTS products with an additional 1/2 million lines of custom glueware code; the new CCS exceeds the capabilities of the original system while significantly reducing the lines of custom code by more than 50%. The lifecycle of COTS/GOTS products will be examined including the package selection process, evaluation process, and integration process. The advantages, disadvantages, issues, concerns, and lessons learned for integrating COTS/GOTS into the NASA's mission critical HST CCS will be examined in detail. This paper will reveal the many hidden costs of COTS/GOTS solutions when compared to traditional custom code development efforts; this paper will show the high cost of COTS/GOTS solutions including training expenses, consulting fees, and long-term maintenance expenses.

Diatom Milking: A Review and New Approaches

PubMed Central

Vinayak, Vandana; Manoylov, Kalina M.; Gateau, Hélène; Blanckaert, Vincent; Hérault, Josiane; Pencréac’h, Gaëlle; Marchand, Justine; Gordon, Richard; Schoefs, Benoît

2015-01-01

The rise of human populations and the growth of cities contribute to the depletion of natural resources, increase their cost, and create potential climatic changes. To overcome difficulties in supplying populations and reducing the resource cost, a search for alternative pharmaceutical, nanotechnology, and energy sources has begun. Among the alternative sources, microalgae are the most promising because they use carbon dioxide (CO2) to produce biomass and/or valuable compounds. Once produced, the biomass is ordinarily harvested and processed (downstream program). Drying, grinding, and extraction steps are destructive to the microalgal biomass that then needs to be renewed. The extraction and purification processes generate organic wastes and require substantial energy inputs. Altogether, it is urgent to develop alternative downstream processes. Among the possibilities, milking invokes the concept that the extraction should not kill the algal cells. Therefore, it does not require growing the algae anew. In this review, we discuss research on milking of diatoms. The main themes are (a) development of alternative methods to extract and harvest high added value compounds; (b) design of photobioreactors; (c) biodiversity and (d) stress physiology, illustrated with original results dealing with oleaginous diatoms. PMID:25939034

Impact of 5 years of lean six sigma in a University Medical Center.

PubMed

Niemeijer, Gerard C; Trip, Albert; de Jong, Laura J; Wendt, Klaus W; Does, Ronald J M M

2012-01-01

Lean Six Sigma (LSS) is an originally industry-based methodology for cost reduction and quality improvement. In more recent years, LSS was introduced in health care as well. This article describes the experiences of the University Medical Center Groningen, the second largest hospital in the Netherlands, with LSS. It was introduced in 2007 to create the financial possibility to develop innovations. In this article, we describe how LSS was introduced, and how it developed in the following years. We zoom in at the traumatology department, where all main processes have been analyzed and improved. An evaluation after 5 years shows that LSS helped indeed reducing cost and improving quality. Moreover, it aided the transition of the organization from purely problem oriented to more process oriented, which in turn is helpful in eliminating waste and finding solutions for difficult problems. A major benefit of the program is that own employees are trained to become project leaders for improvement. Several people from the primary process were thus stimulated and equipped to become role models for continuous improvement.

Special report. New products that improve officer performance, safety.

PubMed

1991-12-01

The need for products that improve performance of security officers is counterbalanced these days by budgetary constraints. While this may limit major investments in security systems and personnel, less costly improvements or innovations might be worth considering. In this report, we will discuss four advances that may be valuable not only in hospital security, but in other industries as well. One of them, a smoke filter, was originally developed for the hotel industry. Another, a drug detection device, may replace the use of undercover agents or drug-sniffing' dogs in certain circumstances. The third new product is an economical patrol vehicle for parking facilities which might replace more costly vehicles such as golf carts or cars. The fourth product, a roving CCTV camera, is actually being tested at a Midwest medical center and may allow you to monitor areas of parking garages with cameras instead of officers on patrol.

Assessment of grid optimisation measures for the German transmission grid using open source grid data

NASA Astrophysics Data System (ADS)

Böing, F.; Murmann, A.; Pellinger, C.; Bruckmeier, A.; Kern, T.; Mongin, T.

2018-02-01

The expansion of capacities in the German transmission grid is a necessity for further integration of renewable energy sources into the electricity sector. In this paper, the grid optimisation measures ‘Overhead Line Monitoring’, ‘Power-to-Heat’ and ‘Demand Response in the Industry’ are evaluated and compared against conventional grid expansion for the year 2030. Initially, the methodical approach of the simulation model is presented and detailed descriptions of the grid model and the used grid data, which partly originates from open-source platforms, are provided. Further, this paper explains how ‘Curtailment’ and ‘Redispatch’ can be reduced by implementing grid optimisation measures and how the depreciation of economic costs can be determined considering construction costs. The developed simulations show that the conventional grid expansion is more efficient and implies more grid relieving effects than the evaluated grid optimisation measures.

Study on the financing mechanism and management for decommissioning of nuclear installations in Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saleh, Lydia Ilaiza, E-mail: lydiailaiza@gmail.com; Ryong, Kim Tae

The whole cycle of the decommissioning process development of repository requires the relevant bodies to have a financial system to ensure that it has sufficient funds for its whole life cycle (over periods of many decades). Therefore, the financing mechanism and management system shall respect the following status: the national position, institutional and legislative environment, technical capabilities, the waste origin, ownership, characteristics and inventories. The main objective of the studies is to focus on the cost considerations, alternative funding managements and mechanisms, technical and non-technical factors that may affect the repository life-cycle costs. As a conclusion, the outcomes of thismore » paper is to make a good recommendation and could be applied to the national planners, regulatory body, engineers, or the managers, to form a financial management plan for the decommissioning of the Nuclear Installation.« less

The forensic holodeck: an immersive display for forensic crime scene reconstructions.

PubMed

Ebert, Lars C; Nguyen, Tuan T; Breitbeck, Robert; Braun, Marcel; Thali, Michael J; Ross, Steffen

2014-12-01

In forensic investigations, crime scene reconstructions are created based on a variety of three-dimensional image modalities. Although the data gathered are three-dimensional, their presentation on computer screens and paper is two-dimensional, which incurs a loss of information. By applying immersive virtual reality (VR) techniques, we propose a system that allows a crime scene to be viewed as if the investigator were present at the scene. We used a low-cost VR headset originally developed for computer gaming in our system. The headset offers a large viewing volume and tracks the user's head orientation in real-time, and an optical tracker is used for positional information. In addition, we created a crime scene reconstruction to demonstrate the system. In this article, we present a low-cost system that allows immersive, three-dimensional and interactive visualization of forensic incident scene reconstructions.

Commercialization of NASA's High Strength Cast Aluminum Alloy for High Temperature Applications

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2003-01-01

In this paper, the commercialization of a new high strength cast aluminum alloy, invented by NASA-Marshall Space Flight Center, for high temperature applications will be presented. Originally developed to meet U.S. automotive legislation requiring low- exhaust emission, the novel NASA aluminum alloy offers dramatic improvement in tensile and fatigue strengths at elevated temperatures (450 F-750 F), which can lead to reducing part weight and cost as well as improving performance for automotive engine applications. It is an ideal low cost material for cast components such as pistons, cylinder heads, cylinder liners, connecting rods, turbo chargers, impellers, actuators, brake calipers and rotors. NASA alloy also offers greater wear resistance, dimensional stability, and lower thermal expansion compared to conventional aluminum alloys, and the new alloy can be produced economically from sand, permanent mold and investment casting. Since 2001, this technology was licensed to several companies for automotive and marine internal combustion engines applications.

Policy Driven Development: Flexible Policy Insertion for Large Scale Systems.

PubMed

Demchak, Barry; Krüger, Ingolf

2012-07-01

The success of a software system depends critically on how well it reflects and adapts to stakeholder requirements. Traditional development methods often frustrate stakeholders by creating long latencies between requirement articulation and system deployment, especially in large scale systems. One source of latency is the maintenance of policy decisions encoded directly into system workflows at development time, including those involving access control and feature set selection. We created the Policy Driven Development (PDD) methodology to address these development latencies by enabling the flexible injection of decision points into existing workflows at runtime , thus enabling policy composition that integrates requirements furnished by multiple, oblivious stakeholder groups. Using PDD, we designed and implemented a production cyberinfrastructure that demonstrates policy and workflow injection that quickly implements stakeholder requirements, including features not contemplated in the original system design. PDD provides a path to quickly and cost effectively evolve such applications over a long lifetime.

Cost-effectiveness of single dose cefotaxime plus metronidazole compared with three doses each of cefuroxime plus metronidazole for the prevention of wound infection after colorectal surgery.

PubMed

Davey, P; Lynch, B; Malek, M; Byrne, D; Thomas, P

1992-12-01

The cost-effectiveness of prophylaxis for colonic surgery with single dose cefotaxime plus metronidazole has been compared with that of three doses each of cefuroxime plus metronidazole, by analysing data from a previously published study supplemented with additional data on the hospital and community costs of wound infection after colonic surgery. The original trial included 942 patients having elective colonic surgery in 14 hospitals. The data on costs of wound infection were collected from a further 124 patients undergoing elective colonic surgery at Ninewells Hospital. All these patients received a three dose regimen of cefuroxime plus metronidazole. The Dundee patients received three injections of 0.75 g cefuroxime at 8-hourly intervals whereas the trial patients received a single dose of 1.5 g followed by two further doses of 0.75 g at 8-hourly intervals. The cefuroxime prophylaxis regimen used in the trial cost 24.16 pounds per patient more than the cefotaxime regimen. The components of the excess cost were drugs (15.18 pounds), equipment (6.14 pounds) and staff time (2.84 pounds). The median cost to the hospital of a wound infection was 978.04 pounds (95% CI 482.04 pounds to 1521.22 pounds). The components of the hospital cost of wound infection were: hotel costs 858 pounds (88%), dressing costs 83.02 pounds (8%) and drug costs (excluding prophylaxis) 37.02 pounds (4%). Only five patients received additional antibiotic treatment in the community, and only one required home visits from the District Nurse. Applying the difference in costs of prophylaxis as 21 pounds (costs of drugs plus equipment) and the cost per wound infection as 1000 pounds to the observed wound infection rate of 7% in the cefuroxime group, the wound infection rate in the cefotaxime group would have to be 2.1% higher for the two regimens to be equally cost-effective. The probability that such a difference in efficacy exists is 0.088. A model was developed to calculate the probability of equal cost-effectiveness over a range of costs of wound infection.

Impact of immigration on the cost of emergency visits in Barcelona (Spain)

PubMed Central

Cots, Francesc; Castells, Xavier; García, Oscar; Riu, Marta; Felipe, Aida; Vall, Oriol

2007-01-01

Background The impact of immigration on health services utilisation has been analysed by several studies performed in countries with lower levels of immigration than Spain. These studies indicate that health services utilisation is lower among the immigrant population than among the host population and that immigrants tend to use hospital emergency services at the expense of primary care. We aimed to quantify the relative over-utilisation of emergency services in the immigrant population. Methods Emergency visits to Hospital del Mar in Barcelona in 2002 and 2003 were analysed. The country of origin, gender, age, discharge-related circumstances (hospital admission, discharge to home, or death), medical specialty, and variable cost related to medical care were registered. Immigrants were grouped into those from high-income countries (IHIC) and those from low-income countries (ILIC) and the average direct cost was compared by country of origin. A multivariate linear mixed model of direct costs was adjusted by country of origin (classified in five groups) and by the individual variables of age, gender, hospital admission, and death as a cause of discharge. Medical specialty was considered as a random effect. Results With the exception of gynaecological emergency visits, costs resulting from emergency visits by both groups of immigrants were lower than those due to visits by the Spanish-born population. This effect was especially marked for emergency visits by adults. Conclusion Immigrants tend to use the emergency department in preference to other health services. No differences were found between IHIC and ILIC, suggesting that this result was due to the ease of access to emergency services and to lack of knowledge about the country's health system rather than to poor health status resulting from immigrants' socioeconomic position. The use of costs as a variable of complexity represents an opportunistic use of a highly exhaustive registry, which is becoming ever more frequent in hospitals and which overcomes the lack of clinical information related to outpatient activity. PMID:17239236

EoC Study Update to Examine the Cost, Schedule and Technical Changes to NASA Projects

NASA Technical Reports Server (NTRS)

Bitten, Bob; Emmons, Debra; Shinn, Stephen; Scolese, Chris

2018-01-01

The original National Aeronautics and Space Administration (NASA) Explanation of Change (EoC) study was conducted in 2010 to understand the underlying causes of cost and schedule growth. The first study consisted of 25 missions launched from 2000 to 2010 and looked at the events that led to growth. These events were categorized into different bins that were rolled up to quantify whether the growth was due to internal planning, or internal execution, or from external forces and found that the growth was evenly distributed among those three categories. The result of the study presented nine considerations focused at reducing growth due to project external events and internal planning events. Although no one 'magic bullet' consideration was discovered in the previous work, the nine considerations taken as a whole were postulated to help reduce cost and schedule change in future NASA missions. A recent update was conducted that included investigating 8 missions developed since the previous study to determine if the results were different. Cost, schedule, and mass increases were analyzed from the start of Phase B through Preliminary Design Review and Critical Design Review to Launch. As shown in this paper, the results are better with overall cost and schedule growth being reduced. The paper will show a comparison of the previous results to the updated results to show specific reductions and provide an explanation of which recommendations were followed.

How Should Global Fund Use Value-for-Money Information to Sustain its Investments in Graduating Countries?

PubMed

Kanpirom, Kitti; Luz, Alia Cynthia G; Chalkidou, Kalipso; Teerawattananon, Yot

2017-02-27

It has been debated whether the Global Fund (GF), which is supporting the implementation of programs on the prevention and control of HIV/AIDS, tuberculosis (TB) and malaria, should consider the value-for-money (VFM) for programs/interventions that they are supporting. In this paper, we critically analyze the uses of economic information for GF programs, not only to ensure accountability to their donors but also to support country governments in continuing investment in cost-effective interventions initiated by the GF despite the discontinuation of financial support after graduation. We demonstrate that VFM is not a static property of interventions and may depend on program start-up cost, economies of scales, the improvement of effectiveness and efficiency of providers once the program develops, and acceptance and adherence of the target population. Interventions that are cost-ineffective in the beginning may become cost-effective in later stages. We consider recent GF commitments towards value for money and recommend that the GF supports interventions with proven cost-effectiveness from program initiation as well as interventions that may be cost-effective afterwards. Thus, the GF and country governments should establish mechanisms to monitor cost-effectiveness of interventions invested over time. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

A systematic review of cost-effectiveness analyses of drugs for postmenopausal osteoporosis.

PubMed

Hiligsmann, Mickaël; Evers, Silvia M; Ben Sedrine, Wafa; Kanis, John A; Ramaekers, Bram; Reginster, Jean-Yves; Silverman, Stuart; Wyers, Caroline E; Boonen, Annelies

2015-03-01

Given the limited availability of healthcare resources and the recent introduction of new anti-osteoporosis drugs, the interest in the cost effectiveness of drugs in postmenopausal osteoporosis remains and even increases. This study aims to identify all recent economic evaluations on drugs for postmenopausal osteoporosis, to critically appraise the reporting quality, and to summarize the results. A literature search using Medline, the National Health Service Economic Evaluation database and the Cost-Effectiveness Analysis Registry was undertaken to identify original articles published between January 1, 2008 and December 31, 2013. Studies that assessed cost effectiveness of drugs in postmenopausal osteoporosis were included. The Consolidated Health Economic Evaluation Reporting Standards (CHEERS) statement was used to assess the quality of reporting of these articles. Of 1,794 articles identified, 39 studies fulfilled the inclusion criteria. They were conducted in 14 different countries and nine active interventions were assessed. When compared with no treatment, active osteoporotic drugs were generally cost effective in postmenopausal women aged over 60-65 years with low bone mass, especially those with prior vertebral fractures. Key drivers of cost effectiveness included individual fracture risk, medication adherence, selected comparators and country-specific analyses. Quality of reporting varied between studies with an average score of 17.9 out of 24 (range 7-21.5). This review found a substantial number of published cost-effectiveness analyses of drugs in osteoporosis in the last 6 years. Results and critical appraisal of these articles can help decision makers when prioritizing health interventions and can inform the development of future economic evaluations.

76 FR 16625 - Notice of Public Information Collection Being Reviewed by the Federal Communications Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... 1934, as amended. Total Annual Burden: 12,146 hours. Total Annual Cost: 24,000. Privacy Act Impact... required to carry the signal originating as analog after commencing carriage of digital signals on June 8... signals that originate as analog signals for carriage commencing on December 8, 2005 and ending on...

KSC-2012-3152

NASA Image and Video Library

2012-04-06

DALLAS – This computational fluid dynamics CFD image was taken during a series of wind tunnel tests for Blue Origin's next-generation Space Vehicle at Lockheed Martin's High Speed Wind Tunnel Facility in Dallas. The Space Vehicle's innovative biconic shape is designed to provide more cross-range and interior volume than a traditional capsule and weigh less than a winged vehicle. More than 180 wind tunnel tests validated the company's analysis of the Space Vehicle's aerodynamics during descent through the atmosphere and the ability to change its flight path, which could increase the number of available landing opportunities and enhance the vehicle's emergency return capability. In 2011, NASA selected Blue Origin during Commercial Crew Development Round 2 CCDev2) activities for NASA’s Commercial Crew Program to mature the design and development of a crew transportation system with the overall goal of accelerating a United States-led capability to the International Space Station. The goal of CCP is to drive down the cost of space travel as well as open up space to more people than ever before by balancing industry’s own innovative capabilities with NASA's 50 years of human spaceflight experience. Six other aerospace companies also are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. ATK, The Boeing Co., Excalibur Almaz Inc., Sierra Nevada Corp., Space Exploration Technologies SpaceX, and United Launch Alliance ULA. For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

KSC-2012-3151

NASA Image and Video Library

2012-04-06

DALLAS – This image was taken during a series of wind tunnel tests for Blue Origin's Space Vehicle at Lockheed Martin's High Speed Wind Tunnel Facility in Dallas. The Space Vehicle's innovative biconic shape is designed to provide more cross-range and interior volume than a traditional capsule and weigh less than a winged vehicle. More than 180 wind tunnel tests validated the company's analysis of the Space Vehicle's aerodynamics during descent through the atmosphere and the ability to change its flight path, which could increase the number of available landing opportunities and enhance the vehicle's emergency return capability. In 2011, NASA selected Blue Origin during Commercial Crew Development Round 2 CCDev2) activities for NASA’s Commercial Crew Program to mature the design and development of a crew transportation system with the overall goal of accelerating a United States-led capability to the International Space Station. The goal of CCP is to drive down the cost of space travel as well as open up space to more people than ever before by balancing industry’s own innovative capabilities with NASA's 50 years of human spaceflight experience. Six other aerospace companies also are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. ATK, The Boeing Co., Excalibur Almaz Inc., Sierra Nevada Corp., Space Exploration Technologies SpaceX, and United Launch Alliance ULA. For more information, visit www.nasa.gov/commercialcrew. Image credit: Blue Origin

Support surfaces for intraoperative prevention of pressure ulcers in patients undergoing surgery: a cost-effectiveness analysis.

PubMed

Pham, Ba'; Teague, Laura; Mahoney, James; Goodman, Laurie; Paulden, Mike; Poss, Jeff; Li, Jianli; Sikich, Nancy Joan; Lourenco, Rosemarie; Ieraci, Luciano; Carcone, Steven; Krahn, Murray

2011-07-01

Patients who undergo prolonged surgical procedures are at risk of developing pressure ulcers. Recent systematic reviews suggest that pressure redistribution overlays on operating tables significantly decrease the associated risk. Little is known about the cost effectiveness of using these overlays in a prevention program for surgical patients. Using a Markov cohort model, we evaluated the cost effectiveness of an intraoperative prevention strategy with operating table overlays made of dry, viscoelastic polymer from the perspective of a health care payer over a 1-year period. We simulated patients undergoing scheduled surgical procedures lasting ≥90 min in the supine or lithotomy position. Compared with the current practice of using standard mattresses on operating tables, the intraoperative prevention strategy decreased the estimated intraoperative incidence of pressure ulcers by 0.51%, corresponding to a number-needed-to-treat of 196 patients. The average cost of using the operating table overlay was $1.66 per patient. Compared with current practice, this intraoperative prevention strategy would increase slightly the quality-adjusted life days of patients and by decreasing the incidence of pressure ulcers, this strategy would decrease both hospital and home care costs for treating fewer pressure ulcers originated intraoperatively. The cost savings was $46 per patient, which ranged from $13 to $116 by different surgical populations. Intraoperative prevention was 99% likely to be more cost effective than the current practice. In patients who undergo scheduled surgical procedures lasting ≥90 min, this intraoperative prevention strategy could improve patients' health and save hospital costs. The clinical and economic evidence support the implementation of this prevention strategy in settings where it has yet to become current practice. Copyright © 2011 Mosby, Inc. All rights reserved.

The effect of isolation and culture methods on epithelial stem cell populations and their progeny-toward an improved cell expansion protocol for clinical application.

PubMed

Lenihan, Catherine; Rogers, Caroline; Metcalfe, Anthony D; Martin, Yella H

2014-12-01

The use of cultured epithelial keratinocytes in the treatment of burns and skin graft donor sites is well established in clinical practice. The most widely used culture method for clinical use was originally developed by Rheinwald and Green 40 years ago. This system uses irradiated mouse dermal fibroblasts as a feeder cell layer to promote keratinocyte growth, a process that is costly and labor-intensive for health care providers. The medium formulation contains several components of animal origin, which pose further safety risks for patients. Improvements and simplification in the culturing process would lead to clear advantages: improved safety through reduction of xenobiotic components and reduction in cost for health care providers by dispensing with feeder cells. We compared the Rheinwald and Green method to culture in three commercially available, feeder-free media systems with defined/absent components of animal origin. During the isolation process, short incubation times in high-strength trypsin resulted in increased numbers of liberated keratinocyte stem cells compared with longer incubation times. All three commercially available media tested in this study could support the expansion of keratinocytes, with phenotypes comparable to cells expanded using the established Rheinwald and Green method. Growth rates varied, with two of the media displaying comparable growth rates, whereas the third was significantly slower. Our study demonstrates the suitability of such feeder-free media systems in clinical use. It further outlines a range of techniques to evaluate keratinocyte phenotype when assessing the suitability of cells for clinical application. Copyright © 2014 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

NASA Design Strengthens Welds

NASA Technical Reports Server (NTRS)

2008-01-01

Friction Stir Welding (FSW) is a solid-state joining process-a combination of extruding and forging-ideal for use when the original metal characteristics must remain as unchanged as possible. While exploring methods to improve the use of FSW in manufacturing, engineers at Marshall Space Flight Center created technologies to address the method's shortcomings. MTS Systems Corporation, of Eden Prairie, Minnesota, discovered the NASA-developed technology and then signed a co-exclusive license agreement to commercialize Marshall's design for use in high-strength structural alloys. The resulting process offers the added bonuses of being cost-competitive, efficient, and most importantly, versatile.

The Clinical Evaluation of Hypertension

PubMed Central

de Champlain, Jacques

1985-01-01

The incidence of secondary hypertension in clinical practice is probably below 5%. The majority of those cases are of renal origin. Extensive and costly investigations for rarer forms of hypertension therefore do not appear justified. A comprehensive medical history, plus a good physical exam and some critical laboratory analyses can uncover the great majority of primary and secondary forms of hypertension, allowing for the detection of additional risks factors. Current research trends will eventually provide newer approaches which may permit a better evaluation of the prognosis of hypertension, as well as the development of more efficient therapies. Imagesp307-a PMID:21274102

A Better Way to Store Energy for Less Cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darmon, Jonathan M.; Weiss, Charles J.; Hulley, Elliott B.

Representing the Center for Molecular Electrocatalysis (CME), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE energy. The mission of CME to understand, design and develop molecular electrocatalysts for solar fuel production and use.

Paper-based analytical devices for environmental analysis.

PubMed

Meredith, Nathan A; Quinn, Casey; Cate, David M; Reilly, Thomas H; Volckens, John; Henry, Charles S

2016-03-21

The field of paper-based microfluidics has experienced rapid growth over the past decade. Microfluidic paper-based analytical devices (μPADs), originally developed for point-of-care medical diagnostics in resource-limited settings, are now being applied in new areas, such as environmental analyses. Low-cost paper sensors show great promise for on-site environmental analysis; the theme of ongoing research complements existing instrumental techniques by providing high spatial and temporal resolution for environmental monitoring. This review highlights recent applications of μPADs for environmental analysis along with technical advances that may enable μPADs to be more widely implemented in field testing.

Matrix and Backstage: Cellular Substrates for Viral Vaccines

PubMed Central

Jordan, Ingo; Sandig, Volker

2014-01-01

Vaccines are complex products that are manufactured in highly dynamic processes. Cellular substrates are one critical component that can have an enormous impact on reactogenicity of the final preparation, level of attenuation of a live virus, yield of infectious units or antigens, and cost per vaccine dose. Such parameters contribute to feasibility and affordability of vaccine programs both in industrialized countries and developing regions. This review summarizes the diversity of cellular substrates for propagation of viral vaccines from primary tissue explants and embryonated chicken eggs to designed continuous cell lines of human and avian origin. PMID:24732259

Training for an MIS Implementation: What Does it Really Cost?

PubMed Central

Jacobs, Patt

1984-01-01

Implementation of MIS systems in a hospital environment are complex, problematic, long-term endeavors. St. Vincent Hospital and Medical Center (SVHMC) completed the implementation of its base system MIS five years after the original contract was signed. The cost of that implementation in terms of time and dollars for one aspect only, training is reported.

Economic value of ecosystem attributes in the Southern Appalachian highlands

Treesearch

Thomas Holmes; Brent Sohngen; Linwood Pendleton; Robert Mendelsohn

1997-01-01

The hedonic travel cost method was used to make preliminary estimates of the economic value of ecosystem attributes found in the Southern Appalachian highlands. Travel costs were estimated using origin-destination data from Wilderness Area permits, and site attribute data were collected by field crews. Ecosystem attribute price frontiers were estimated and used to...

What are the cost savings associated with providing access to specialist care through the Champlain BASE eConsult service? A costing evaluation.

PubMed

Liddy, Clare; Drosinis, Paul; Deri Armstrong, Catherine; McKellips, Fanny; Afkham, Amir; Keely, Erin

2016-06-23

This study estimates the costs and potential savings associated with all eConsult cases completed between 1 April 2014 and 31 March 2015. Costing evaluation from the societal perspective estimating the costs and potential savings associated with all eConsults completed during the study period. Champlain health region in Eastern Ontario, Canada. Primary care providers and specialists registered to use the eConsult service. Costs included (1) delivery costs; (2) specialist remuneration; (3) costs associated with traditional (face-to-face) referrals initiated as a result of eConsult. Potential savings included (1) costs of traditional referrals avoided; (2) indirect patient savings through avoided travel and lost wages/productivity. Net potential societal cost savings were estimated by subtracting total costs from total potential savings. A total of 3487 eConsults were completed during the study period. In 40% of eConsults, a face-to-face specialist visit was originally contemplated but avoided as result of eConsult. In 3% of eConsults, a face-to-face specialist visit was not originally contemplated but was prompted as a result of the eConsult. From the societal perspective, total costs were estimated at $207 787 and total potential savings were $246 516. eConsult led to a net societal saving of $38 729 or $11 per eConsult. Our findings demonstrate potential cost savings from the societal perspective, as patients avoided the travel costs and lost wages/productivity associated with face-to-face specialist visits. Greater savings are expected once we account for other costs such as avoided tests and visits and potential improved health outcomes associated with shorter wait times. Our findings are valuable for healthcare delivery decision-makers as they seek solutions to improve care in a patient-centred and efficient manner. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Vaccinating women previously exposed to human papillomavirus: a cost-effectiveness analysis of the bivalent vaccine.

PubMed

Turner, Hugo C; Baussano, Iacopo; Garnett, Geoff P

2013-01-01

Recent trials have indicated that women with prior exposure to Human papillomavirus (HPV) subtypes 16/18 receive protection against reinfection from the HPV vaccines. However, many of the original models investigating the cost effectiveness of different vaccination strategies for the protection of cervical cancer assumed, based on the trial results at that time, that these women received no protection. We developed a deterministic, dynamic transmission model that incorporates the vaccine-induced protection of women with prior exposure to HPV. The model was used to estimate the cost effectiveness of progressively extending a vaccination programme using the bivalent vaccine to older age groups both with and without protection of women with prior exposure. We did this under a range of assumptions on the level of natural immunity. Our modelling projections indicate that including the protection of women with prior HPV exposure can have a profound effect on the cost effectiveness of vaccinating adults. The impact of this protection is inversely related to the level of natural immunity. Our results indicate that adult vaccination strategies should potentially be reassessed, and that it is important to include the protection of non-naive women previously infected with HPV in future studies. Furthermore, they also highlight the need for a more thorough investigation of this protection.

Mobile Aerial Tracking and Imaging System (MATrIS) for Aeronautical Research

NASA Technical Reports Server (NTRS)

Banks, Daniel W.; Blanchard, Robert C.; Miller, Geoffrey M.

2004-01-01

A mobile, rapidly deployable ground-based system to track and image targets of aeronautical interest has been developed. Targets include reentering reusable launch vehicles as well as atmospheric and transatmospheric vehicles. The optics were designed to image targets in the visible and infrared wavelengths. To minimize acquisition cost and development time, the system uses commercially available hardware and software where possible. The conception and initial funding of this system originated with a study of ground-based imaging of global aerothermal characteristics of reusable launch vehicle configurations. During that study the National Aeronautics and Space Administration teamed with the Missile Defense Agency/Innovative Science and Technology Experimentation Facility to test techniques and analysis on two Space Shuttle flights.

Innovating by developing new uses of already-approved drugs: trends in the marketing approval of supplemental indications.

PubMed

DiMasi, Joseph A

2013-06-01

Much of the literature on trends and factors affecting biopharmaceutical innovation has focused overwhelmingly on the development and approval of never-before approved drugs and biologics. Little attention has been paid to new uses for already-approved compounds, which can be an important form of innovation. This paper aimed to determine and analyze recent trends in the number and type of new or modified US indication approvals for drugs and biologics. We also examine regulatory approval-phase times for new-use efficacy supplements and compare them to approval-phase times for original-use approvals over the same period. We developed a data set of efficacy supplements approved by the US Food and Drug Administration (FDA) from 1998 to 2011 that includes information on the type, approval-phase time (time from submission to the FDA of an application for marketing approval to approval of the application), and FDA therapeutic-significance rating for the approved application, which we obtained from an FDA Web site. This data set was merged with a Tufts Center for the Study of Drug Development (CSDD) data set of US new drug and biologics approvals. We developed descriptive statistics on trends in the number and type of new-use efficacy supplements, on US regulatory approval-phase times for the supplements, and on original new drug and biologics approvals over the study period and for the time from original- to new-use approval. The total number of new-use efficacy-supplement approvals did not exhibit a marked trend, but the number of new pediatric-indication approvals increased substantially. Approval-phase times for new-use supplements varied by therapeutic class and FDA therapeutic-significance rating. Mean approval-phase times were highest for central nervous system compounds (13.8 months) and lowest for antineoplastics (8.9 months). The mean time from original to supplement approval was substantially longer for new pediatric indications than for other new uses. Mean approval-phase time during the study period for applications that received a standard review rating from the FDA was substantially shorter for supplements compared to original uses, but the differences for applications that received a priority review rating from the FDA were negligible. Development of and regulatory approval for new uses of already-approved drugs and biologics is an important source of innovation by biopharmaceutical firms. Despite rising development costs, the output of new-use approvals has remained stable in recent years, driven largely by the pursuit of new pediatric indications. FDA approval-phase times have generally declined substantially for all types of applications since the mid-1990s following legislation that provided a new source of income for the agency. However, while the resources needed to review supplemental applications are likely lower in general than for original-use approvals, the approval-phase times for important new uses are no lower than for important original-use applications. Copyright © 2013 Elsevier HS Journals, Inc. All rights reserved.

Defense Acquisitions. Assessment of DOD Efforts to Enhance Missile Defense Capabilities and Oversight

DTIC Science & Technology

2008-02-26

will no longer defer work from one block to another. Accountability should also be improved as MDA will for the first time estimate unit costs for... costs are no longer accounted for in the original block. In other words, if work planned and budgeted for Block 2006 was deferred to Block 2008, that...difficult to conduct oversight and hold the agency accountable for its planned outcomes and costs . As we reported in March 2007, MDA operates with

Firefighters' Radios

NASA Technical Reports Server (NTRS)

1976-01-01

Public Technology Inc. asked for NASA assistance to devise the original firefighter's radio. Good short-range radio communications are essential during a fire to coordinate hose lines, rescue victims, and otherwise increase efficiency. Useful firefighting tool is lower cost, more rugged short range two-way radio. Inductorless electronic circuit replaced inductances and coils in radio circuits with combination of transistors and other low-cost components. Substitution promises reduced circuit size and cost. Enhanced electrical performance made radio more durable and improved maintainability by incorporating modular construction.

Generic Drugs - Decreasing Costs and Room for Increased Number of Kidney Transplantations.

PubMed

Spasovski, Goce

2015-01-01

Kidney transplantation is the best treatment option in comparison to dialysis, although patients are obliged to receive life-long medical treatment with immunosuppressive drugs (ISDs) for prevention of the graft rejection. Such immunosuppressive treatment may be costly and associated with multiple adverse effects. Since costs are viewed as one of the major constraints for the increasing number of transplantation, the use of generic ISDs may decrease the overall cost of transplantation and raise the possibility for its further development. An ideal ISD should have the security margin between toxic and therapeutic dose, and prevent development of acute or chronic rejection of the transplanted kidney. This is particularly important for drugs with a "narrow therapeutical index" (NTI), where small differences in dose or concentration lead to dose and concentration-dependent, serious therapeutic failures and/or adverse drug reactions. The NTI generic drug is approved if within 90%-112% of the area under the curve of the original product the pharmacokinetics fulfills the strict criteria of pharmaceutical equivalence and bioequivalence. Every generic has to be proven to be bioequivalent to the innovator product, and not to other generic products because of the possible generic "drift". Thus, the generic ISDs may be economically attractive, but theoretically, they may pose a risk to transplant patients. Such risks may be reduced if a long-term clinical studies showing cost-effectiveness of generic ISDs in de novo and prevalent transplant patients for every new generic ISD are performed. In conclusion, the increased number of solid organ transplantation goes in line with the increased health care expenditure for ISDs. The generic immunosuppressants could be a possible solution if safely substituted for innovator products or other generic drug of choice. The substantial cost reduction needs to be redirected into organ donation initiatives so that more patients can benefit from the further increase in transplantation.

When is critical care medicine cost-effective? A systematic review of the cost-effectiveness literature.

PubMed

Talmor, Daniel; Shapiro, Nathan; Greenberg, Dan; Stone, Patricia W; Neumann, Peter J

2006-11-01

Receiving care in an intensive care unit can greatly influence patients' survival and quality of life. Such treatments can, however, be extremely resource intensive. Therefore, it is increasingly important to understand the costs and consequences associated with interventions aimed at reducing mortality and morbidity of critically ill patients. Cost-effectiveness analyses (CEAs) have become increasingly common to aid decisions about the allocation of scarce healthcare resources. To identify published original CEAs presenting cost/quality-adjusted life year or cost/life-year ratios for treatments used in intensive care units, to summarize the results in an accessible format, and to identify areas in critical care medicine that merit further economic evaluation. We conducted a systematic search of the English-language literature for original CEAs of critical care interventions published from 1993 through 2003. We collected data on the target population, therapy or program, study results, analytic methods employed, and the cost-effectiveness ratios presented. We identified 19 CEAs published through 2003 with 48 cost-effectiveness ratios pertaining to treatment of severe sepsis, acute respiratory failure, and general critical care interventions. These ratios ranged from cost saving to 958,423 US dollars/quality-adjusted life year and from 1,150 to 575,054 US dollars/life year gained. Many studies reported favorable cost-effectiveness profiles (i.e., below 50,000 US dollars/life year or quality-adjusted life year). Specific interventions such as activated protein C for patients with severe sepsis have been shown to provide good value for money. However, overall there is a paucity of CEA literature on the management of the critically ill, and further high-quality CEA is needed. In particular, research should focus on costly interventions such as 24-hr intensivist availability, early goal-directed therapy, and renal replacement therapy. Recent guidelines for the conduct of CEAs in critical care may increase the number and improve the quality of future CEAs.

Impact of Enterovirus Testing on Resource Use in Febrile Young Infants: A Systematic Review.

PubMed

Wallace, Sowdhamini S; Lopez, Michelle A; Caviness, A Chantal

2017-02-01

Enterovirus infection commonly causes fever in infants aged 0 to 90 days and, without testing, is difficult to differentiate from serious bacterial infection. To determine the cost savings of routine enterovirus testing and identify subgroups of infants with greater potential impact from testing among infants 0 to 90 days old with fever. Studies were identified systematically from published and unpublished literature by using Embase, Medline, the Cochrane database, and conference proceedings. Inclusion criteria were original studies, in any language, of enterovirus infection including the outcomes of interest in infants aged 0 to 90 days. Standardized instruments were used to appraise each study. The evidence quality was evaluated using Grading of Recommendations Assessment, Development, and Evaluation criteria. Two investigators independently searched the literature, screened and critically appraised the studies, extracted the data, and applied the Grading of Recommendations Assessment, Development, and Evaluation criteria. Of the 257 unique studies identified and screened, 32 were completely reviewed and 8 were included. Routine enterovirus testing was associated with reduced hospital length of stay and cost savings during peak enterovirus season. Cerebrospinal fluid pleocytosis was a poor predictor of enterovirus meningitis. The studies were all observational and the evidence was of low quality. Enterovirus polymerase chain reaction testing, independent of cerebrospinal fluid pleocytosis, can reduce length of stay and achieve cost savings, especially during times of high enterovirus prevalence. Additional study is needed to identify subgroups that may achieve greater cost savings from testing to additionally enhance the efficiency of testing. Copyright © 2017 by the American Academy of Pediatrics.

SOFTCOST - DEEP SPACE NETWORK SOFTWARE COST MODEL

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1994-01-01

The early-on estimation of required resources and a schedule for the development and maintenance of software is usually the least precise aspect of the software life cycle. However, it is desirable to make some sort of an orderly and rational attempt at estimation in order to plan and organize an implementation effort. The Software Cost Estimation Model program, SOFTCOST, was developed to provide a consistent automated resource and schedule model which is more formalized than the often used guesswork model based on experience, intuition, and luck. SOFTCOST was developed after the evaluation of a number of existing cost estimation programs indicated that there was a need for a cost estimation program with a wide range of application and adaptability to diverse kinds of software. SOFTCOST combines several software cost models found in the open literature into one comprehensive set of algorithms that compensate for nearly fifty implementation factors relative to size of the task, inherited baseline, organizational and system environment, and difficulty of the task. SOFTCOST produces mean and variance estimates of software size, implementation productivity, recommended staff level, probable duration, amount of computer resources required, and amount and cost of software documentation. Since the confidence level for a project using mean estimates is small, the user is given the opportunity to enter risk-biased values for effort, duration, and staffing, to achieve higher confidence levels. SOFTCOST then produces a PERT/CPM file with subtask efforts, durations, and precedences defined so as to produce the Work Breakdown Structure (WBS) and schedule having the asked-for overall effort and duration. The SOFTCOST program operates in an interactive environment prompting the user for all of the required input. The program builds the supporting PERT data base in a file for later report generation or revision. The PERT schedule and the WBS schedule may be printed and stored in a file for later use. The SOFTCOST program is written in Microsoft BASIC for interactive execution and has been implemented on an IBM PC-XT/AT operating MS-DOS 2.1 or higher with 256K bytes of memory. SOFTCOST was originally developed for the Zylog Z80 system running under CP/M in 1981. It was converted to run on the IBM PC XT/AT in 1986. SOFTCOST is a copyrighted work with all copyright vested in NASA.

USABC Development of 12 Volt Battery for Start-Stop Application: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tataria, H.; Gross, O.; Bae, C.

Global automakers are accelerating the development of fuel efficient vehicles, as a part of meeting regional regulatory CO2 emissions requirements. The micro hybrid vehicles with auto start-stop functionality are considered economical solutions for the stringent European regulations. Flooded lead acid batteries were initially considered the most economical solution for idle-stop systems. However, the dynamic charge acceptance (DCA) at lower state-of-charge (SOC) was limiting the life of the batteries. While improved lead-acid batteries with AGM and VRLA features have improved battery longevity, they do not last the life of the vehicle. The United States Advanced Battery Consortium (or USABC, a consortiummore » of GM, Ford, and Chrysler) analyzed energy storage needs for a micro hybrid automobile with start-stop capability, and with a single power source. USABC has analyzed the start-stop behaviors of many drivers and has developed the requirements for the start-stop batteries (Table 3). The testing procedures to validate the performance and longevity were standardized and published. The guideline for the cost estimates calculations have also been provided, in order to determine the value of the newly developed modules. The analysis effort resulted in a set of requirements which will help the battery manufacturers to develop a module to meet the automotive Original Equipment Manufacturers (OEM) micro hybrid vehicle requirements. Battery developers were invited to submit development proposals and two proposals were selected for 50% cost share with USABC/DOE.« less

A Winning Cast

NASA Technical Reports Server (NTRS)

2001-01-01

Howmet Research Corporation was the first to commercialize an innovative cast metal technology developed at Auburn University, Auburn, Alabama. With funding assistance from NASA's Marshall Space Flight Center, Auburn University's Solidification Design Center (a NASA Commercial Space Center), developed accurate nickel-based superalloy data for casting molten metals. Through a contract agreement, Howmet used the data to develop computer model predictions of molten metals and molding materials in cast metal manufacturing. Howmet Metal Mold (HMM), part of Howmet Corporation Specialty Products, of Whitehall, Michigan, utilizes metal molds to manufacture net shape castings in various alloys and amorphous metal (metallic glass). By implementing the thermophysical property data from by Auburn researchers, Howmet employs its newly developed computer model predictions to offer customers high-quality, low-cost, products with significantly improved mechanical properties. Components fabricated with this new process replace components originally made from forgings or billet. Compared with products manufactured through traditional casting methods, Howmet's computer-modeled castings come out on top.

Incorporating approximation error in surrogate based Bayesian inversion

NASA Astrophysics Data System (ADS)

Zhang, J.; Zeng, L.; Li, W.; Wu, L.

2015-12-01

There are increasing interests in applying surrogates for inverse Bayesian modeling to reduce repetitive evaluations of original model. In this way, the computational cost is expected to be saved. However, the approximation error of surrogate model is usually overlooked. This is partly because that it is difficult to evaluate the approximation error for many surrogates. Previous studies have shown that, the direct combination of surrogates and Bayesian methods (e.g., Markov Chain Monte Carlo, MCMC) may lead to biased estimations when the surrogate cannot emulate the highly nonlinear original system. This problem can be alleviated by implementing MCMC in a two-stage manner. However, the computational cost is still high since a relatively large number of original model simulations are required. In this study, we illustrate the importance of incorporating approximation error in inverse Bayesian modeling. Gaussian process (GP) is chosen to construct the surrogate for its convenience in approximation error evaluation. Numerical cases of Bayesian experimental design and parameter estimation for contaminant source identification are used to illustrate this idea. It is shown that, once the surrogate approximation error is well incorporated into Bayesian framework, promising results can be obtained even when the surrogate is directly used, and no further original model simulations are required.

Development of an Advanced Stimulation / Production Predictive Simulator for Enhanced Geothermal Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pritchett, John W.

2015-04-15

There are several well-known obstacles to the successful deployment of EGS projects on a commercial scale, of course. EGS projects are expected to be deeper, on the average, than conventional “natural” geothermal reservoirs, and drilling costs are already a formidable barrier to conventional geothermal projects. Unlike conventional resources (which frequently announce their presence with natural manifestations such as geysers, hot springs and fumaroles), EGS prospects are likely to appear fairly undistinguished from the earth surface. And, of course, the probable necessity of fabricating a subterranean fluid circulation network to mine the heat from the rock (instead of simply relying onmore » natural, pre-existing permeable fractures) adds a significant degree of uncertainty to the prospects for success. Accordingly, the basic motivation for the work presented herein was to try to develop a new set of tools that would be more suitable for this purpose. Several years ago, the Department of Energy’s Geothermal Technologies Office recognized this need and funded a cost-shared grant to our company (then SAIC, now Leidos) to partner with Geowatt AG of Zurich, Switzerland and undertake the development of a new reservoir simulator that would be more suitable for EGS forecasting than the existing tools. That project has now been completed and a new numerical geothermal reservoir simulator has been developed. It is named “HeatEx” (for “Heat Extraction”) and is almost completely new, although its methodology owes a great deal to other previous geothermal software development efforts, including Geowatt’s “HEX-S” code, the STAR and SPFRAC simulators developed here at SAIC/Leidos, the MINC approach originally developed at LBNL, and tracer analysis software originally formulated at INEL. Furthermore, the development effort was led by engineers with many years of experience in using reservoir simulation software to make meaningful forecasts for real geothermal projects, not just software designers. It is hoped that, as a result, HeatEx will prove useful during the early stages of the development of EGS technology. The basic objective was to design a tool that could use field data that are likely to become available during the early phases of an EGS project (that is, during initial reconnaissance and fracture stimulation operations) to guide forecasts of the longer-term behavior of the system during production and heat-mining.« less

An overview of water disinfection in developing countries and the potential for solar thermal water pasteurization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burch, J.; Thomas, K.E.

This study originated within the Solar Buildings Program at the U.S. Department of Energy. Its goal is to assess the potential for solar thermal water disinfection in developing countries. In order to assess solar thermal potential, the alternatives must be clearly understood and compared. The objectives of the study are to: (a) characterize the developing world disinfection needs and market; (b) identify competing technologies, both traditional and emerging; (c) analyze and characterize solar thermal pasteurization; (d) compare technologies on cost-effectiveness and appropriateness; and (e) identify research opportunities. Natural consequences of the study beyond these objectives include a broad knowledge ofmore » water disinfection problems and technologies, introduction of solar thermal pasteurization technologies to a broad audience, and general identification of disinfection opportunities for renewable technologies.« less

A Comparison of Surface Acoustic Wave Modeling Methods

NASA Technical Reports Server (NTRS)

Wilson, W. c.; Atkinson, G. M.

2009-01-01

Surface Acoustic Wave (SAW) technology is low cost, rugged, lightweight, extremely low power and can be used to develop passive wireless sensors. For these reasons, NASA is investigating the use of SAW technology for Integrated Vehicle Health Monitoring (IVHM) of aerospace structures. To facilitate rapid prototyping of passive SAW sensors for aerospace applications, SAW models have been developed. This paper reports on the comparison of three methods of modeling SAWs. The three models are the Impulse Response Method a first order model, and two second order matrix methods; the conventional matrix approach, and a modified matrix approach that is extended to include internal finger reflections. The second order models are based upon matrices that were originally developed for analyzing microwave circuits using transmission line theory. Results from the models are presented with measured data from devices.

Is there a kink in consumers' threshold value for cost-effectiveness in health care?

PubMed

O'Brien, Bernie J; Gertsen, Kirsten; Willan, Andrew R; Faulkner, Lisa A

2002-03-01

A reproducible observation is that consumers' willingness-to-accept (WTA) monetary compensation to forgo a program is greater than their stated willingness-to-pay (WTP) for the same benefit. Several explanations exist, including the psychological principle that the utility of losses weighs heavier than gains. We sought to quantify the WTP-WTA disparity from published literature and explore implications for cost-effectiveness analysis accept-reject thresholds in the south-west quadrant of the cost-effectiveness plane (less effect, less cost). We reviewed published studies (health and non-health) to estimate the ratio of WTA to WTP for the same program benefit for each study and to determine if WTA is consistently greater than WTP in the literature. WTA/WTP ratios were greater than unity for every study we reviewed. The ratios ranged from 3.2 to 89.4 for environmental studies (n=7), 1.9 to 6.4 for health care studies (n=2), 1.1 to 3.6 for safety studies (n=4) and 1.3 to 2.6 for experimental studies (n=7). Given that WTA is greater than WTP based on individual preferences, should not societal preferences used to determine cost-effectiveness thresholds reflect this disparity? Current convention in cost-effectiveness analysis is that any given accept-rejection criterion (e.g. $50 k/QALY gained) is symmetric - a straight line through the origin of the cost-effectiveness plane. The WTA-WTP evidence suggests a downward 'kink' through the origin for the south-west quadrant, such that the 'selling price' of a QALY is greater than the 'buying price'. The possibility of 'kinky cost-effectiveness' decision rules and the size of the kink merits further exploration. Copyright 2002 John Wiley & Sons, Ltd.

A cost-effectiveness analysis of celecoxib compared with diclofenac in the treatment of pain in osteoarthritis (OA) within the Swedish health system using an adaptation of the NICE OA model.

PubMed

Brereton, Nicholas; Pennington, Becky; Ekelund, Mats; Akehurst, Ronald

2014-09-01

Celecoxib for the treatment of pain resulting from osteoarthritis (OA) was reviewed by the Tandvårds- och läkemedelsförmånsverket-Dental and Pharmaceutical Benefits Board (TLV) in Sweden in late 2010. This study aimed to evaluate the incremental cost-effectiveness ratio (ICER) of celecoxib plus a proton pump inhibitor (PPI) compared to diclofenac plus a PPI in a Swedish setting. The National Institute for Health and Care Excellence (NICE) in the UK developed a health economic model as part of their 2008 assessment of treatments for OA. In this analysis, the model was reconstructed and adapted to a Swedish perspective. Drug costs were updated using the TLV database. Adverse event costs were calculated using the regional price list of Southern Sweden and the standard treatment guidelines from the county council of Stockholm. Costs for treating cardiovascular (CV) events were taken from the Swedish DRG codes and the literature. Over a patient's lifetime treatment with celecoxib plus a PPI was associated with a quality-adjusted life year (QALY) gain of 0.006 per patient when compared to diclofenac plus a PPI. There was an increase in discounted costs of 529 kr per patient, which resulted in an incremental cost-effectiveness ratio (ICER) of 82,313 kr ($12,141). Sensitivity analysis showed that treatment was more cost effective in patients with an increased risk of bleeding or gastrointestinal (GI) complications. The results suggest that celecoxib plus a PPI is a cost effective treatment for OA when compared to diclofenac plus a PPI. Treatment is shown to be more cost effective in Sweden for patients with a high risk of bleeding or GI complications. It was in this population that the TLV gave a positive recommendation. There are known limitations on efficacy in the original NICE model.

Orthopaedic trauma care in Haiti: a cost-effectiveness analysis of an innovative surgical residency program.

PubMed

Carlson, Lucas C; Slobogean, Gerard P; Pollak, Andrew N

2012-01-01

In an effort to sustainably strengthen orthopaedic trauma care in Haiti, a 2-year Orthopaedic Trauma Care Specialist (OTCS) program for Haitian physicians has been developed. The program will provide focused training in orthopaedic trauma surgery and fracture care utilizing a train-the-trainer approach. The purpose of this analysis was to calculate the cost-effectiveness of the program relative to its potential to decrease disability in the Haitian population. Using established methodology originally outlined in the World Health Organization's Global Burden of Disease project, a cost-effectiveness analysis was performed for the OTCS program in Haiti. Costs and disability-adjusted life-years (DALYs) averted were estimated per fellow trained in the OTCS program by using a 20-year career time horizon. Probabilistic sensitivity analysis was used to simultaneously test the joint uncertainty of the cost and averted DALY estimates. A willingness-to-pay threshold of $1200 per DALY averted, equal to the gross domestic product per capita in Haiti, was selected on the basis of World Health Organization's definition of highly cost-effective health interventions. The OTCS program results in an incremental cost of $1,542,544 ± $109,134 and 12,213 ± 2,983 DALYs averted per fellow trained. The cost-effectiveness ratio of $133.97 ± $34.71 per DALY averted is well below the threshold of $1200 per DALY averted. Furthermore, sensitivity analysis suggests that implementing the OTCS program is the economically preferred strategy with more than 95% probability at a willingness-to-pay threshold of $200 per DALY averted and across the entire range of potential variable inputs. The current economic analysis suggests the OTCS program to be a highly cost-effective intervention. Probabilistic sensitivity analysis demonstrates that the conclusions remain stable even when considering the joint uncertainty of the cost and DALY estimates. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Integrated omics analysis of specialized metabolism in medicinal plants.

PubMed

Rai, Amit; Saito, Kazuki; Yamazaki, Mami

2017-05-01

Medicinal plants are a rich source of highly diverse specialized metabolites with important pharmacological properties. Until recently, plant biologists were limited in their ability to explore the biosynthetic pathways of these metabolites, mainly due to the scarcity of plant genomics resources. However, recent advances in high-throughput large-scale analytical methods have enabled plant biologists to discover biosynthetic pathways for important plant-based medicinal metabolites. The reduced cost of generating omics datasets and the development of computational tools for their analysis and integration have led to the elucidation of biosynthetic pathways of several bioactive metabolites of plant origin. These discoveries have inspired synthetic biology approaches to develop microbial systems to produce bioactive metabolites originating from plants, an alternative sustainable source of medicinally important chemicals. Since the demand for medicinal compounds are increasing with the world's population, understanding the complete biosynthesis of specialized metabolites becomes important to identify or develop reliable sources in the future. Here, we review the contributions of major omics approaches and their integration to our understanding of the biosynthetic pathways of bioactive metabolites. We briefly discuss different approaches for integrating omics datasets to extract biologically relevant knowledge and the application of omics datasets in the construction and reconstruction of metabolic models. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

Ideas for the rapid development of the structural models in mechanical engineering

NASA Astrophysics Data System (ADS)

Oanta, E.; Raicu, A.; Panait, C.

2017-08-01

Conceiving computer based instruments is a long run concern of the authors. Some of the original solutions are: optimal processing of the large matrices, interfaces between the programming languages, approximation theory using spline functions, numerical programming increased accuracy based on the extended arbitrary precision libraries. For the rapid development of the models we identified the following directions: atomization, ‘librarization’, parameterization, automatization and integration. Each of these directions has some particular aspects if we approach mechanical design problems or software development. Atomization means a thorough top-down decomposition analysis which offers an insight regarding the basic features of the phenomenon. Creation of libraries of reusable mechanical parts and libraries of programs (data types, functions) save time, cost and effort when a new model must be conceived. Parameterization leads to flexible definition of the mechanical parts, the values of the parameters being changed either using a dimensioning program or in accord to other parts belonging to the same assembly. The resulting templates may be also included in libraries. Original software applications are useful for the model’s input data generation, to input the data into CAD/FEA commercial applications and for the data integration of the various types of studies included in the same project.

Lowering the Cost Barrier to Higher Education for Undocumented Students: A Promising University-Level Intervention

ERIC Educational Resources Information Center

Thangasamy, Andrew; Horan, Deborah

2016-01-01

Undocumented students, many of Hispanic origin, face among the strictest cost barriers to higher education in the United States. Lack of legal status excludes them from most state and all federal financial aid programs. Furthermore, most states require them to pay out-of-state tuition rates at publicly supported institutions. In a new direction,…

Suburb-to-suburb intercity travel: Energy, time and dollar expenditures

NASA Technical Reports Server (NTRS)

Fels, M. F.

1976-01-01

The effect of adding suburb to terminal and terminal to suburb travel is examined. The energy consumed in entire trips was estimated. The total energy costs are compared with total travel times, and dollar costs to the traveler. Trips between origins in seven suburbs of Newark, New Jersey and destinations in two Washington, D. C. suburbs are analyzed.

Further Validation of the Psychosocial Costs of Racism to Whites Scale among Employed Adults

ERIC Educational Resources Information Center

Poteat, V. Paul; Spanierman, Lisa B.

2008-01-01

To examine the validity and test the generalizability of the Psychosocial Costs of Racism to Whites Scale (PCRW) beyond the original college student sample, a geographically dispersed sample of employed White adults (N = 284) in eight states completed the measure to assess for White empathic reactions toward racism, White guilt, and White fear of…

Impact of vaccine herd-protection effects in cost-effectiveness analyses of childhood vaccinations. A quantitative comparative analysis.

PubMed

Holubar, Marisa; Stavroulakis, Maria Christina; Maldonado, Yvonne; Ioannidis, John P A; Contopoulos-Ioannidis, Despina

2017-01-01

Inclusion of vaccine herd-protection effects in cost-effectiveness analyses (CEAs) can impact the CEAs-conclusions. However, empirical epidemiologic data on the size of herd-protection effects from original studies are limited. We performed a quantitative comparative analysis of the impact of herd-protection effects in CEAs for four childhood vaccinations (pneumococcal, meningococcal, rotavirus and influenza). We considered CEAs reporting incremental-cost-effectiveness-ratios (ICERs) (per quality-adjusted-life-years [QALY] gained; per life-years [LY] gained or per disability-adjusted-life-years [DALY] avoided), both with and without herd protection, while keeping all other model parameters stable. We calculated the size of the ICER-differences without vs with-herd-protection and estimated how often inclusion of herd-protection led to crossing of the cost-effectiveness threshold (of an assumed societal-willingness-to-pay) of $50,000 for more-developed countries or X3GDP/capita (WHO-threshold) for less-developed countries. We identified 35 CEA studies (20 pneumococcal, 4 meningococcal, 8 rotavirus and 3 influenza vaccines) with 99 ICER-analyses (55 per-QALY, 27 per-LY and 17 per-DALY). The median ICER-absolute differences per QALY, LY and DALY (without minus with herd-protection) were $15,620 (IQR: $877 to $48,376); $54,871 (IQR: $787 to $115,026) and $49 (IQR: $15 to $1,636) respectively. When the target-vaccination strategy was not cost-saving without herd-protection, inclusion of herd-protection always resulted in more favorable results. In CEAs that had ICERs above the cost-effectiveness threshold without herd-protection, inclusion of herd-protection led to crossing of that threshold in 45% of the cases. This impacted only CEAs for more developed countries, as all but one CEAs for less developed countries had ICERs below the WHO-cost-effectiveness threshold even without herd-protection. In several analyses, recommendation for the adoption of the target vaccination strategy depended on the inclusion of the herd protection effect. Inclusion of herd-protection effects in CEAs had a substantial impact in the estimated ICERs and made target-vaccination strategies more attractive options in almost half of the cases where ICERs were above the societal-willingness to pay threshold without herd-protection. More empirical epidemiologic data are needed to determine the size of herd-protection effects across diverse settings and also the size of negative vaccine effects, e.g. from serotype substitution.

Impact of vaccine herd-protection effects in cost-effectiveness analyses of childhood vaccinations. A quantitative comparative analysis

PubMed Central

Maldonado, Yvonne; Ioannidis, John P. A.; Contopoulos-Ioannidis, Despina

2017-01-01

Background Inclusion of vaccine herd-protection effects in cost-effectiveness analyses (CEAs) can impact the CEAs-conclusions. However, empirical epidemiologic data on the size of herd-protection effects from original studies are limited. Methods We performed a quantitative comparative analysis of the impact of herd-protection effects in CEAs for four childhood vaccinations (pneumococcal, meningococcal, rotavirus and influenza). We considered CEAs reporting incremental-cost-effectiveness-ratios (ICERs) (per quality-adjusted-life-years [QALY] gained; per life-years [LY] gained or per disability-adjusted-life-years [DALY] avoided), both with and without herd protection, while keeping all other model parameters stable. We calculated the size of the ICER-differences without vs with-herd-protection and estimated how often inclusion of herd-protection led to crossing of the cost-effectiveness threshold (of an assumed societal-willingness-to-pay) of $50,000 for more-developed countries or X3GDP/capita (WHO-threshold) for less-developed countries. Results We identified 35 CEA studies (20 pneumococcal, 4 meningococcal, 8 rotavirus and 3 influenza vaccines) with 99 ICER-analyses (55 per-QALY, 27 per-LY and 17 per-DALY). The median ICER-absolute differences per QALY, LY and DALY (without minus with herd-protection) were $15,620 (IQR: $877 to $48,376); $54,871 (IQR: $787 to $115,026) and $49 (IQR: $15 to $1,636) respectively. When the target-vaccination strategy was not cost-saving without herd-protection, inclusion of herd-protection always resulted in more favorable results. In CEAs that had ICERs above the cost-effectiveness threshold without herd-protection, inclusion of herd-protection led to crossing of that threshold in 45% of the cases. This impacted only CEAs for more developed countries, as all but one CEAs for less developed countries had ICERs below the WHO-cost-effectiveness threshold even without herd-protection. In several analyses, recommendation for the adoption of the target vaccination strategy depended on the inclusion of the herd protection effect. Conclusions Inclusion of herd-protection effects in CEAs had a substantial impact in the estimated ICERs and made target-vaccination strategies more attractive options in almost half of the cases where ICERs were above the societal-willingness to pay threshold without herd-protection. More empirical epidemiologic data are needed to determine the size of herd-protection effects across diverse settings and also the size of negative vaccine effects, e.g. from serotype substitution. PMID:28249046

A novel electrostatic precipitator

NASA Astrophysics Data System (ADS)

Tang, Minkang; Wang, Liqian; Lin, Zhigui

2013-03-01

ESP (Electrostatic Precipitation) has been widely used in the mining, building materials, metallurgy and power industries. Dust particles or other harmful particles from the airstream can be precipitated by ESP with great collecting efficiency. Because of its' large size, high cost and energy consumption, the scope of application of ESP has been limited to a certain extent. By means of the theory of electrostatics and fluid dynamics, a corona assembly with a self-cleaning function and a threshold voltage automatic tracking technology has been developed and used in ESP. It is indicated that compared with conventional ESP, the electric field length has been reduced to 1/10 of the original, the current density on the collecting electrode increased 3-5 times at the maximum, the approach speed of dust particles in the electric field towards the collecting electrode is 4 times that in conventional ESP and the electric field wind speed may be enhanced by 2-3 times the original. Under the premise of ESP having a high efficiency of dust removal, equipment volume may be actually reduced to 1/5 to 1/10 of the original volume and energy consumption may be reduced by more than 50%.

Hydro-economic Risk Assessment in the Eastern Nile River Basin

NASA Astrophysics Data System (ADS)

Arjoon, D.; Tilmant, A.; Mohamed, Y.

2013-12-01

In 2011, the Ethiopian government announced plans for the construction of the Grand Renaissance Dam (GRD) on the Blue Nile, just east of its border with Sudan, at a cost of almost 5 billion dollars. The project is expected to generate over 15 TWh of energy and will include a reservoir of more than 60 km3 capacity, which roughly corresponds to the average annual flow of the Blue Nile. This project is part of a larger scheme, by the government, to expand its hydroelectric power capacity, however, the scheme faces strong opposition from downstream Egypt and Sudan. Egypt and Sudan are highly dependent on flows that originate in Ethiopia (it has been estimated that 86% of Nile flow originates in the Ethiopian highlands). The Ethiopian government argues that the dam would supply electricity for Ethiopians as well as generate surplus energy for export to neighboring countries. The Ethiopians also argue that the huge reservoir would generate positive externalities downstream by reducing floods and providing more constant and predictable lows. This study attempts to provide an independent analysis of the hydrologic and economic risks faced by downstream countries when GRD will be online. To achieve this, an integrated, stochastic hydro-economic model of the entire Eastern Nile basin is used to analyze various development and management scenarios. The results indicate that if countries agree to co- operative management of the Eastern Nile River basin, GRD would indeed significantly increase basin-wide benefits, especially in Ethiopia and in Sudan. An alternative management scenario, whereby GRD would be operated by Sudan and Egypt, does not yield significant economic gains in these countries. However, massive unilateral irrigation developments in Ethiopia will be detrimental for all countries, including Ethiopia itself, due to the huge opportunity costs involved.

Obsolescence Risk Assessment Process Best Practice

NASA Astrophysics Data System (ADS)

Romero Rojo, F. J.; Roy, R.; Kelly, S.

2012-05-01

A component becomes obsolete when it is no longer available from the original manufacturer to the original specification. In long-lifecycle projects, obsolescence has become a major problem as it prevents the maintenance of the system. This is the reason why obsolescence management is now an essential part of the product support activities in sectors such as defence, aerospace, nuclear and railway; where systems need to be supported for several decades. The obsolescence risk assessment for the bill of materials (BoM) is a paramount activity in order to manage obsolescence proactively and cost-effectively. This is the reason why it was necessary to undertake a benchmarking study to develop best practice in this process. A total of 22 obsolescence experts from 13 different organisations/projects from across UK and USA have participated in this study. Their current processes and experience have been taken into account in the development of the best practice process for obsolescence risk assessment. The key factors that have to be analysed in the risk assessment process for each component in the BoM are: number of manufacturers, years to end of life, stock available, consumption rate and operational impact criticality. For the very high risk components, a more detailed analysis is required to inform the decisions regarding the most suitable mitigation strategies. On the contrary, for the low risk components, a fully proactive approach is neither appropriate nor cost effective. Therefore, it is advised for these components that obsolescence issues are dealt with reactively. This process has been validated using case studies with several experts from industry and is currently being implemented by the UK Ministry of Defence as technical guidance within the JSP 886 Volume 7 Part 8.13 standards.

The Roles of Relative Linguistic Proficiency and Modality Switching in Language Switch Cost: Evidence from Chinese Visual Unimodal and Bimodal Bilinguals.

PubMed

Lu, Aitao; Wang, Lu; Guo, Yuyang; Zeng, Jiahong; Zheng, Dongping; Wang, Xiaolu; Shao, Yulan; Wang, Ruiming

2017-09-01

The current study investigated the mechanism of language switching in unbalanced visual unimodal bilinguals as well as balanced and unbalanced bimodal bilinguals during a picture naming task. All three groups exhibited significant switch costs across two languages, with symmetrical switch cost in balanced bimodal bilinguals and asymmetrical switch cost in unbalanced unimodal bilinguals and bimodal bilinguals. Moreover, the relative proficiency of the two languages but not their absolute proficiency had an effect on language switch cost. For the bimodal bilinguals the language switch cost also arose from modality switching. These findings suggest that the language switch cost might originate from multiple sources from both outside (e.g., modality switching) and inside (e.g., the relative proficiency of the two languages) the linguistic lexicon.

A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting

PubMed Central

Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won

2017-01-01

The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times. PMID:29149220

A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting.

PubMed

Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won; Ha, Ji-Hyoung

2017-01-01

The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times.

Shortened length of stay and hospital cost reduction with implementation of an accelerated clinical care pathway after elective colon resection.

PubMed

Stephen, Antonia E; Berger, David L

2003-03-01

Patient care pathways have been developed for operative procedures with documented improvements in length of stay and cost without compromising outcome. The average hospital stay after colonic resection is 5 to 10 days. This study describes a clinical pathway for colon resections and examines patient outcome before and after institution of the pathway. One hundred thirty-eight patients underwent elective colon resections at our institution by a single surgeon before (n = 52) and after (n = 86) introduction of a clinical pathway. Length of stay, postoperative complications, readmissions, and cost per patient were compared between the 2 groups. Mean total length of stay (+/- standard deviation [SD]) was less in the postclinical pathway patients (3.7 +/- 1.5 days) compared to preclinical pathway patients (6.6 +/- 3.3 days) (P <.001). When adjusted for age, sex, diagnosis, and type of operation, the difference in length of stay remains statistically significant (P <.001). There was 1 readmission in the prepathway group and 8 readmissions in the postpathway group. When the readmissions were added to the original admissions, the mean length of stay in the postpathway patients was 4.2 +/- 2.8 days and in the prepathway patients was 6.9 +/- 4.1 days (P <.001). The average cost per patient (+/- standard error of the mean), with readmission costs added, was 9310 +/- 5170 US dollars in the prepathway group and 7070 +/- 3670 US dollars in the postpathway group (P =.002). The institution of a clinical pathway for elective, open colon resections can be done safely with improvements in cost and length of stay.

Fitness costs associated with field-evolved resistance to Bt maize in Spodoptera frugiperda (Lepidoptera: Noctuidae).

PubMed

Jakka, S R K; Knight, V R; Jurat-Fuentes, J L

2014-02-01

Increasing adoption of transgenic crops expressing cry toxin genes from Bacillus thuringiensis (Bt crops) represents an augmented risk for development of insect resistance. While fitness costs can greatly influence the rate of resistance evolution, most available data related to Bt resistance have been obtained from laboratory-selected insect strains. In this article, we test the existence of fitness costs associated with high levels of field-evolved resistance to Bt maize event TC1507 in a strain of Spodoptera frugiperda (JE Smith) originated from maize fields in Puerto Rico. Fitness costs in resistant S. frugiperda were evaluated by comparing biological performance to susceptible insects when reared on meridic diet, maize or soybean leaf tissue, or cotton reproductive tissues. Parameters monitored included larval survival, larval and pupal weights, developmental time (larval and pupal), adult longevity, reproductive traits (fecundity and fertility), and sex ratio. We found that all monitored parameters were influenced to a similar extent by the host, independently of susceptibility to Bt maize. The only parameter that significantly differed between strains for all hosts was a longer larval developmental period in resistant S. frugiperda, which resulted in emergence asynchrony between susceptible and resistant adults. To test the relevance of fitness costs in resistant S. frugiperda, we performed a selection experiment to monitor the stability of resistance in a heterogeneous strain through 12 generations of rearing on meridic diet. Our data demonstrate lack of fitness costs relevant to stability of field-evolved resistance to Bt maize and help explain reported stability of field-evolved resistance in Puerto Rican populations of S. frugiperda.

A web access script language to support clinical application development.

PubMed

O'Kane, K C; McColligan, E E

1998-02-01

This paper describes the development of a script language to support the implementation of decentralized, clinical information applications on the World Wide Web (Web). The goal of this work is to facilitate construction of low overhead, fully functional clinical information systems that can be accessed anywhere by low cost Web browsers to search, retrieve and analyze stored patient data. The Web provides a model of network access to data bases on a global scale. Although it was originally conceived as a means to exchange scientific documents, Web browsers and servers currently support access to a wide variety of audio, video, graphical and text based data to a rapidly growing community. Access to these services is via inexpensive client software browsers that connect to servers by means of the open architecture of the Internet. In this paper, the design and implementation of a script language that supports the development of low cost, Web-based, distributed clinical information systems for both Inter- and Intra-Net use is presented. The language is based on the Mumps language and, consequently, supports many legacy applications with few modifications. Several enhancements, however, have been made to support modern programming practices and the Web interface. The interpreter for the language also supports standalone program execution on Unix, MS-Windows, OS/2 and other operating systems.

Modular magazine for suitable handling of microparts in industry

NASA Astrophysics Data System (ADS)

Grimme, Ralf; Schmutz, Wolfgang; Schlenker, Dirk; Schuenemann, Matthias; Stock, Achim; Schaefer, Wolfgang

1998-01-01

Microassembly and microadjustment techniques are key technologies in the industrial production of hybrid microelectromechanical systems. One focal point in current microproduction research and engineering is the design and development of high-precision microassembly and microadjustment equipment capable of operating within the framework of flexible automated industrial production. As well as these developments, suitable microassembly tools for industrial use also need to be equipped with interfaces for the supply and delivery of microcomponents. The microassembly process necessitates the supply of microparts in a geometrically defined manner. In order to reduce processing steps and production costs, there is a demand for magazines capable of providing free accessibility to the fixed microcomponents. Commonly used at present are feeding techniques, which originate from the field of semiconductor production. However none of these techniques fully meets the requirements of industrial microassembly technology. A novel modular magazine set, developed and tested in a joint project, is presented here. The magazines are able to hold microcomponents during cleaning, inspection and assembly without nay additional handling steps. The modularity of their design allows for maximum technical flexibility. The modular magazine fits into currently practiced SEMI standards. The design and concept of the magazine enables industrial manufacturers to promote a cost-efficient and flexible precision assembly of microelectromechanical systems.

Insecticide resistance and nutrition interactively shape life-history parameters in German cockroaches

PubMed Central

Jensen, Kim; Ko, Alexander E.; Schal, Coby; Silverman, Jules

2016-01-01

Fitness-related costs of evolving insecticide resistance have been reported in a number of insect species, but the interplay between evolutionary adaptation to insecticide pressure and variable environmental conditions has received little attention. We provisioned nymphs from three German cockroach (Blattella germanica L.) populations, which differed in insecticide resistance, with either nutritionally rich or poor (diluted) diet throughout their development. One population was an insecticide-susceptible laboratory strain; the other two populations originated from a field-collected indoxacarb-resistant population, which upon collection was maintained either with or without further selection with indoxacarb. We then measured development time, survival to the adult stage, adult body size, and results of a challenge with indoxacarb. Our results show that indoxacarb resistance and poor nutritional condition increased development time and lowered adult body size, with reinforcing interactions. We also found lower survival to the adult stage in the indoxacarb-selected population, which was exacerbated by poor nutrition. In addition, nutrition imparted a highly significant effect on indoxacarb susceptibility. This study exemplifies how poor nutritional condition can aggravate the life-history costs of resistance and elevate the detrimental effects of insecticide exposure, demonstrating how environmental conditions and resistance may interactively impact individual fitness and insecticide efficacy. PMID:27345220

VERSE - Virtual Equivalent Real-time Simulation

NASA Technical Reports Server (NTRS)

Zheng, Yang; Martin, Bryan J.; Villaume, Nathaniel

2005-01-01

Distributed real-time simulations provide important timing validation and hardware in the- loop results for the spacecraft flight software development cycle. Occasionally, the need for higher fidelity modeling and more comprehensive debugging capabilities - combined with a limited amount of computational resources - calls for a non real-time simulation environment that mimics the real-time environment. By creating a non real-time environment that accommodates simulations and flight software designed for a multi-CPU real-time system, we can save development time, cut mission costs, and reduce the likelihood of errors. This paper presents such a solution: Virtual Equivalent Real-time Simulation Environment (VERSE). VERSE turns the real-time operating system RTAI (Real-time Application Interface) into an event driven simulator that runs in virtual real time. Designed to keep the original RTAI architecture as intact as possible, and therefore inheriting RTAI's many capabilities, VERSE was implemented with remarkably little change to the RTAI source code. This small footprint together with use of the same API allows users to easily run the same application in both real-time and virtual time environments. VERSE has been used to build a workstation testbed for NASA's Space Interferometry Mission (SIM PlanetQuest) instrument flight software. With its flexible simulation controls and inexpensive setup and replication costs, VERSE will become an invaluable tool in future mission development.

Development of Methods and Equipment for Sheet Stamping

NASA Astrophysics Data System (ADS)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

Potential of electric discharge plasma methods in abatement of volatile organic compounds originating from the food industry.

PubMed

Preis, S; Klauson, D; Gregor, A

2013-01-15

Increased volatile organic compounds emissions and commensurate tightening of applicable legislation mean that the development and application of effective, cost-efficient abatement methods are areas of growing concern. This paper reviews the last two decades' publications on organic vapour emissions from food processing, their sources, impacts and treatment methods. An overview of the latest developments in conventional air treatment methods is presented, followed by the main focus of the paper, non-thermal plasma technology. The results of the review suggest that non-thermal plasma technology, in its pulsed corona discharge configuration, is an emerging treatment method with potential for low-cost, effective abatement of a wide spectrum of organic air pollutants. It is found that the combination of plasma treatment with catalysis is a development trend that demonstrates considerable potential. The as yet relatively small number of plasma treatment applications is considered to be due to the novelty of pulsed electric discharge techniques and a lack of reliable pulse generators and reactors. Other issues acting as barriers to widespread adoption of the technique include the possible formation of stable oxidation by-products, residual ozone and nitrogen oxides, and sensitivity towards air humidity. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sand-control completion design, installation, and performance in high-rate gas wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, R.C.; Boggan, S.A.

1998-09-01

The Jupiter fields consist of a number of separate Rotliegendes gas reservoirs located approximately 90 miles off the Lincolnshire coast of the UK. The fields that make up Jupiter are Ganymede, Calisto, Europa, Sinope, and Thebe. Originally discovered in 1970, initial appraisal wells indicated poor reservoir properties and low deliverabilities. Development was postponed until a reappraisal of the area in the 1990`s indicated significant upside potential. The initial phase of the Jupiter development plan called for development of Ganymede and Calisto fields, with subsequent phases tying in Europa and Thebe. Initial development planning indicated a need for high field deliverabilitymore » at low capital cost to meet economic targets. A small number of high-rate-potential wells were to be used to deplete the reservoir. Ganymede would be developed by use of a 10-slot platform and Calisto would be developed subsea and tied back to the Ganymede platform. The paper discusses the reservoir, formation assessment, productivity design, drilling design, screen installation, and completion performance.« less

Reducing the complexity of NASA's space communications infrastructure

NASA Technical Reports Server (NTRS)

Miller, Raymond E.; Liu, Hong; Song, Junehwa

1995-01-01

This report describes the range of activities performed during the annual reporting period in support of the NASA Code O Success Team - Lifecycle Effectiveness for Strategic Success (COST LESS) team. The overall goal of the COST LESS team is to redefine success in a constrained fiscal environment and reduce the cost of success for end-to-end mission operations. This goal is more encompassing than the original proposal made to NASA for reducing complexity of NASA's Space Communications Infrastructure. The COST LESS team approach for reengineering the space operations infrastructure has a focus on reversing the trend of engineering special solutions to similar problems.

Rail vs truck transport of biomass.

PubMed

Mahmudi, Hamed; Flynn, Peter C

2006-01-01

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.

Pedestrian mobile mapping system for indoor environments based on MEMS IMU and range camera

NASA Astrophysics Data System (ADS)

Haala, N.; Fritsch, D.; Peter, M.; Khosravani, A. M.

2011-12-01

This paper describes an approach for the modeling of building interiors based on a mobile device, which integrates modules for pedestrian navigation and low-cost 3D data collection. Personal navigation is realized by a foot mounted low cost MEMS IMU, while 3D data capture for subsequent indoor modeling uses a low cost range camera, which was originally developed for gaming applications. Both steps, navigation and modeling, are supported by additional information as provided from the automatic interpretation of evacuation plans. Such emergency plans are compulsory for public buildings in a number of countries. They consist of an approximate floor plan, the current position and escape routes. Additionally, semantic information like stairs, elevators or the floor number is available. After the user has captured an image of such a floor plan, this information is made explicit again by an automatic raster-to-vector-conversion. The resulting coarse indoor model then provides constraints at stairs or building walls, which restrict the potential movement of the user. This information is then used to support pedestrian navigation by eliminating drift effects of the used low-cost sensor system. The approximate indoor building model additionally provides a priori information during subsequent indoor modeling. Within this process, the low cost range camera Kinect is used for the collection of multiple 3D point clouds, which are aligned by a suitable matching step and then further analyzed to refine the coarse building model.

Kinky thresholds revisited: opportunity costs differ in the NE and SW quadrants.

PubMed

Eckermann, Simon

2015-02-01

Historically, a kinked threshold line on the cost-effectiveness plane at the origin was suggested due to differences in willingness to pay (WTP) for health gain with trade-offs in the north-east (NE) quadrant versus willingness to accept (WTA) cost reductions for health loss with trade-offs in the south-west (SW) quadrant. Empirically, WTA is greater than WTP for equivalent units of health, a finding supported by loss aversion under prospect theory. More recently, appropriate threshold values for health effects have been shown to require an endogenous consideration of the opportunity cost of alternative actions in budget-constrained health systems, but also allocative and displacement inefficiency observed in health system practice. Allocative and displacement inefficiency arise in health systems where the least cost-effective program in contraction has a higher incremental cost-effectiveness ratio (ICER = m) than the most cost-effective program in expansion (ICER = n) and displaced services (ICER = d), respectively. The health shadow price derived by Pekarsky, [Formula: see text] reflects the opportunity cost of best alternative adoption and financing actions in reimbursing new technology with expected incremental costs and net effect allowing for allocative (n < m), and displacement, inefficiency (d < m). This provides an appropriate threshold value for the NE quadrant. In this paper, I show that for trade-offs in the SW quadrant, where new strategies have lower expected net cost while lower expected net effect than current practice, the opportunity cost is contraction of the least cost-effective program, with threshold ICER m. That is, in the SW quadrant, the cost reduction per unit of decreased effect should be compared with the appropriate opportunity cost, best alternative generation of funding. Consequently, appropriate consideration of opportunity cost produces a kink in the threshold at the origin, with the health shadow price in the NE quadrant and ICER of the least cost-effective program in contraction (m) in the SW quadrant having the same general shape as that previously suggested by WTP versus WTA. The extent of this kink depends on the degree of allocative and displacement inefficiency, with no kink in the threshold line strictly only appropriate with complete allocative and displacement efficiency, that is n = d = m.

Application of the Life Safety Code to a Historic Test Stand

NASA Technical Reports Server (NTRS)

Askins, Bruce; Lemke, Paul R.; Lewis, William L.; Covell, Carol C.

2011-01-01

NASA has conducted a study to assess alternatives to refurbishing existing launch vehicle modal test facilities as opposed to developing new test facilities to meet the demands of a very fiscally constrained test and evaluation environment. The results of this study showed that Marshall Space Flight Center (MSFC) Test Stand (TS) 4550 could be made compliant, within reasonable cost and schedule impacts, if safety processes and operational limitations were put in place to meet the safety codes and concerns of the Fire Marshall. Trades were performed with key selection criteria to ensure that appropriate levels of occupant safety are incorporated into test facility design modifications. In preparation for the ground vibration tests that were to be performed on the Ares I launch vehicle, the Ares Flight and Integrated Test Office (FITO) organization evaluated the available test facility options, which included the existing mothballed structural dynamic TS4550 used by Apollo and Shuttle, alternative ground vibration test facilities at other locations, and construction of a new dynamic test stand. After an exhaustive assessment of the alternatives, the results favored modifying the TS4550 because it was the lowest cost option and presented the least schedule risk to the NASA Constellation Program for Ares Integrated Vehicle Ground Vibration Test (IVGVT). As the renovation design plans and drawings were being developed for TS4550, a safety concern was discovered the original design for the construction of the test stand, originally built for the Apollo Program and renovated for the Shuttle Program, was completed before NASA s adoption of the currently imposed safety and building codes per National Fire Protection Association Life Safety Code [NFPA 101] and International Building Codes. The initial FITO assessment of the design changes, required to make TS4550 compliant with current safety and building standards, identified a significant cost increase and schedule impact. An effort was launched to thoroughly evaluate the applicable life safety requirements, examine the context in which they were derived, and determine a means by which the TS4550 modifications could be made within budget and on schedule, while still providing the occupants with appropriate levels of safety.

Development of Advanced Methods of Structural and Trajectory Analysis for Transport Aircraft

NASA Technical Reports Server (NTRS)

Ardema, Mark D.; Windhorst, Robert; Phillips, James

1998-01-01

This paper develops a near-optimal guidance law for generating minimum fuel, time, or cost fixed-range trajectories for supersonic transport aircraft. The approach uses a choice of new state variables along with singular perturbation techniques to time-scale decouple the dynamic equations into multiple equations of single order (second order for the fast dynamics). Application of the maximum principle to each of the decoupled equations, as opposed to application to the original coupled equations, avoids the two point boundary value problem and transforms the problem from one of a functional optimization to one of multiple function optimizations. It is shown that such an approach produces well known aircraft performance results such as minimizing the Brequet factor for minimum fuel consumption and the energy climb path. Furthermore, the new state variables produce a consistent calculation of flight path angle along the trajectory, eliminating one of the deficiencies in the traditional energy state approximation. In addition, jumps in the energy climb path are smoothed out by integration of the original dynamic equations at constant load factor. Numerical results performed for a supersonic transport design show that a pushover dive followed by a pullout at nominal load factors are sufficient maneuvers to smooth the jump.

The Use, Evolution and Lessons Learnt of Deployable Static Solar Array Mechanisms

NASA Technical Reports Server (NTRS)

Ferris, Mark; Haslehurst, Andrew

2014-01-01

This paper focuses on the mechanisms incorporated into SSTL's static deployable arrays; namely the sprung-hinges and hold down and release mechanism (HDRM). Combined, the HDRM and hinges form the hold down release system (HDRS). The deployable static solar array HDRS has been successfully used on several missions, first launched upon the DMC-CFESAT spacecraft in 2007 for a U.S. customer (Figure 1), and later used on DMC-UK2 and EXACTVIEW-1 launched in 2009 and 2012, respectively. The simple, robust and low-cost solution HDRS has been evident in allowing missions to satisfy an ever increasing power demand, allowing the solar arrays to increase in size and have a preferable sun angle for increased cell efficiency. The system is now being employed on the first mission out of SSTL's U.S. office (SST-US) on the Orbital Test Bed platform. This paper shall cover details of the original design and development program, problems incurred on latter missions, and evolution of the HDRS for the present Orbital Test Bed mission. Both the original development and recent evolutions have taken place in rapid timescales, to satisfy the high-turnaround of SSTL missions.

Yogi the rock - 3D

NASA Technical Reports Server (NTRS)

1997-01-01

Yogi, a rock taller than rover Sojourner, is the subject of this image, taken in stereo by the deployed Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. The soil in the foreground has been the location of multiple soil mechanics experiments performed by Sojourner's cleated wheels. Pathfinder scientists were able to control the force inflicted on the soil beneath the rover's wheels, giving them insight into the soil's mechanical properties. The soil mechanics experiments were conducted after this image was taken.

Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

The 30 GHz solid state amplifier for low cost low data rate ground terminals

NASA Technical Reports Server (NTRS)

Ngan, Y. C.; Quijije, M. A.

1984-01-01

This report details the development of a 20-W solid state amplifier operating near 30 GHz. The IMPATT amplifier not only met or exceeded all the program objectives, but also possesses the ability to operate in the pulse mode, which was not called for in the original contract requirements. The ability to operate in the pulse mode is essential for TDMA (Time Domain Multiple Access) operation. An output power of 20 W was achieved with a 1-dB instantaneous bandwidth of 260 MHz. The amplifier has also been tested in pulse mode with 50% duty for pulse lengths ranging from 200 ns to 2 micro s with 10 ns rise and fall times and no degradation in output power. This pulse mode operation was made possible by the development of a stable 12-diode power combiner/amplifier and a single-diode pulsed driver whose RF output power was switched on and off by having its bias current modulated via a fast-switching current pulse modulator. Essential to the overall amplifier development was the successful development of state-of-the-art silicon double-drift IMPATT diodes capable of reproducible 2.5 W CW output power with 12% dc-to-RF conversion efficiency. Output powers of as high as 2.75 W has been observed. Both the device and circuit design are amenable to low cost production.