A conceptual model for the development process of confirmatory adaptive clinical trials within an emergency research network.

PubMed

Mawocha, Samkeliso C; Fetters, Michael D; Legocki, Laurie J; Guetterman, Timothy C; Frederiksen, Shirley; Barsan, William G; Lewis, Roger J; Berry, Donald A; Meurer, William J

2017-06-01

Adaptive clinical trials use accumulating data from enrolled subjects to alter trial conduct in pre-specified ways based on quantitative decision rules. In this research, we sought to characterize the perspectives of key stakeholders during the development process of confirmatory-phase adaptive clinical trials within an emergency clinical trials network and to build a model to guide future development of adaptive clinical trials. We used an ethnographic, qualitative approach to evaluate key stakeholders' views about the adaptive clinical trial development process. Stakeholders participated in a series of multidisciplinary meetings during the development of five adaptive clinical trials and completed a Strengths-Weaknesses-Opportunities-Threats questionnaire. In the analysis, we elucidated overarching themes across the stakeholders' responses to develop a conceptual model. Four major overarching themes emerged during the analysis of stakeholders' responses to questioning: the perceived statistical complexity of adaptive clinical trials and the roles of collaboration, communication, and time during the development process. Frequent and open communication and collaboration were viewed by stakeholders as critical during the development process, as were the careful management of time and logistical issues related to the complexity of planning adaptive clinical trials. The Adaptive Design Development Model illustrates how statistical complexity, time, communication, and collaboration are moderating factors in the adaptive design development process. The intensity and iterative nature of this process underscores the need for funding mechanisms for the development of novel trial proposals in academic settings.

Developing evidence-based physical therapy clinical practice guidelines.

PubMed

Kaplan, Sandra L; Coulter, Colleen; Fetters, Linda

2013-01-01

Recommended strategies for developing evidence-based clinical practice guidelines (CPGs) are provided. The intent is that future CPGs developed with the support of the Section on Pediatrics of the American Physical Therapy Association would consistently follow similar developmental processes to yield consistent quality and presentation. Steps in the process of developing CPGs are outlined and resources are provided to assist CPG developers in carrying out their task. These recommended processes may also be useful to CPG developers representing organizations with similar structures, objectives, and resources.

A Software Development Simulation Model of a Spiral Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Malone, Linda

2007-01-01

There is a need for simulation models of software development processes other than the waterfall because processes such as spiral development are becoming more and more popular. The use of a spiral process can make the inherently difficult job of cost and schedule estimation even more challenging due to its evolutionary nature, but this allows for a more flexible process that can better meet customers' needs. This paper will present a discrete event simulation model of spiral development that can be used to analyze cost and schedule effects of using such a process in comparison to a waterfall process.

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

77 FR 56646 - Wayne E. Spencer: Debarment Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

..., including the process for development or approval, of a drug product under the FD&C Act. Dr. Spencer was..., including the process for development or approval, of a drug product under the FD&C Act. On March 7, 2012... to the development or approval, including the process for development or approval, of a drug product...

A Process Research Framework: The International Process Research Consortium

DTIC Science & Technology

2006-12-01

projects ? 52 Theme P | IPRC Framework 5 P-30 How should a process for collaborative development be formulated? The development at different companies...requires some process for the actual collaboration . How should it be handled? P-31 How do we handle change? Requirements change during development ...source projects employ a single-site development model in which there is no large community of testers but rather a single-site small group

Process Correlation Analysis Model for Process Improvement Identification

PubMed Central

Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data. PMID:24977170

Process correlation analysis model for process improvement identification.

PubMed

Choi, Su-jin; Kim, Dae-Kyoo; Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data.

Drug Development Process

MedlinePlus

... Home Food Drugs Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products For Patients Home For Patients Learn About Drug and Device Approvals The Drug Development Process The Drug Development Process Share Tweet Linkedin Pin ...

ASRM test report: Autoclave cure process development

NASA Technical Reports Server (NTRS)

Nachbar, D. L.; Mitchell, Suzanne

1992-01-01

ASRM insulated segments will be autoclave cured following insulation pre-form installation and strip wind operations. Following competitive bidding, Aerojet ASRM Division (AAD) Purchase Order 100142 was awarded to American Fuel Cell and Coated Fabrics Company, Inc. (Amfuel), Magnolia, AR, for subcontracted insulation autoclave cure process development. Autoclave cure process development test requirements were included in Task 3 of TM05514, Manufacturing Process Development Specification for Integrated Insulation Characterization and Stripwind Process Development. The test objective was to establish autoclave cure process parameters for ASRM insulated segments. Six tasks were completed to: (1) evaluate cure parameters that control acceptable vulcanization of ASRM Kevlar-filled EPDM insulation material; (2) identify first and second order impact parameters on the autoclave cure process; and (3) evaluate insulation material flow-out characteristics to support pre-form configuration design.

Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

NASA Astrophysics Data System (ADS)

Strong, Matthew G.

This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

An intraorganizational model for developing and spreading quality improvement innovations.

PubMed

Kellogg, Katherine C; Gainer, Lindsay A; Allen, Adrienne S; OʼSullivan, Tatum; Singer, Sara J

Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group's traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread.

An intraorganizational model for developing and spreading quality improvement innovations

PubMed Central

Kellogg, Katherine C.; Gainer, Lindsay A.; Allen, Adrienne S.; O'Sullivan, Tatum; Singer, Sara J.

2017-01-01

Background: Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. Purpose: We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. Methodology/Approach: We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group’s traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. Findings: The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Practice Implications: Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread. PMID:27428788

[Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

PubMed

Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

2016-01-01

To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

Incorporating consideration of health impacts into land use development approval processes: Development of a Health Background Study Framework.

PubMed

Moloughney, Brent W; Bursey, Gayle E; Neumann, Jana; Leeming, Daniel H; Gutmann, Christine E; Sivanand, Bhavna; Mowat, David L

2014-09-12

This project involved development of a Health Background Study (HBS) Framework to support consideration of health impacts within municipalities' approval process for land use development. Peel Public Health and Toronto Public Health led the project with the participation of planners, urban designers, engineers, public health staff and development industry representatives. Historical growth in the Region of Peel and suburban Toronto has resulted in extensive low-density development, creating car-dependent communities with disconnected streets and segregated land uses. The inclusion of an HBS in developers' applications to municipalities is one approach by which health-related expectations for the built environment can be established within the approval process. Development of the HBS Framework used the six core elements of the built environment with the strongest evidence for impact on health and was informed by analysis of the provincial and local policy contexts, practices of other municipalities and stakeholder interviews. The Framework's contents were refined according to feedback from multidisciplinary stakeholder workshops. The HBS Framework identifies minimum standards for built environment core elements that developers need to address in their applications. The Framework was created to be simple and instructive with applicability to a range of development locations and scales, and to various stages of the development approval process. Peel Public Health is leading several initiatives to support the use of the HBS as a part of the development application process. The HBS Framework is a tool that public health and planning can use to support the consideration of health impacts within municipalities' land use development processes.

Developing Worksheet (LKS) Base on Process Skills in Curriculum 2013 at Elementary School Grade IV,V,VI

NASA Astrophysics Data System (ADS)

Subhan, M.; Oktolita, N.; Kn, M.

2018-04-01

The Lacks of students' skills in the learning process is due to lacks of exercises in the form of LKS. In the curriculum of 2013, there is no LKS as a companion to improve the students' skills. In order to solve those problem, it is necessary to develop LKS based on process skills as a teaching material to improve students' process skills. The purpose of this study is to develop LKS Process Skills based elementary school grade IV, V, VI which is integrated by process skill. The development of LKS can be used to develop the thematic process skills of elementary school students grade IV, V, VI based on curriculum 2013. The expected long-term goal is to produce teaching materials LKS Process Skill based of Thematic learning that is able to develop the process skill of elementary school students grade IV, V, VI. This development research refers to the steps developed by Borg & Gall (1983). The development process is carried out through 10 stages: preliminary research and gathering information, planning, draft development, initial test (limited trial), first product revision, final trial (field trial), product operational revision, Desemination and implementation. The limited subject of the this research is the students of SDN in Dharmasraya grade IV, V, VI. The field trial subjects in the experimental class are the students of SDN Dharmasraya grade IV, V, VI who have implemented the curriculum 2013. The data are collected by using LKS validation sheets, process skill observation sheets, and Thematic learning test (pre-test And post-test). The result of LKS development on the validity score is 81.70 (very valid), on practical score is 83.94 (very practical), and on effectiveness score is 86.67 (very effective). In the trial step the use of LKS using One Group Pretest-Posttest Design research design. The purpose of this trial is to know the effectiveness level of LKS result of development for improving the process skill of students in grade IV, V, and VI of elementary school. The data collection in this research uses the test result sheet of the process skill through pre-test and post-test. Observation results were analyzed with SPSS 16.0 software. The Result of analysis learning process of student skill of Sig value. (2-tailed) (0,000) <α (0.005) then H0 is rejected. There is a significant difference to the development of process skills between students using LKS with students who do not use LKS. It can be concluded that LKS have accuracy, ease and can improve result learn on aspect of skill process of student of grade IV, V and VI elementary school.

Development of oral health policy in Nigeria: an analysis of the role of context, actors and policy process.

PubMed

Etiaba, Enyi; Uguru, Nkoli; Ebenso, Bassey; Russo, Giuliano; Ezumah, Nkoli; Uzochukwu, Benjamin; Onwujekwe, Obinna

2015-05-06

In Nigeria, there is a high burden of oral health diseases, poor coordination of health services and human resources for delivery of oral health services. Previous attempts to develop an Oral Health Policy (OHP) to decrease the oral disease burden failed. However, a policy was eventually developed in November 2012. This paper explores the role of contextual factors, actors and the policy process in the development of the OHP and possible reasons why the current approved OHP succeeded. The study was undertaken across Nigeria; information gathered through document reviews and in-depth interviews with five groups of purposively selected respondents. Analysis of the policy development process was guided by the policy triangle framework, examining context, policy process and actors involved in the policy development. The foremost enabling factor was the yearning among policy actors for a policy, having had four failed attempts. Other factors were the presence of a democratically elected government, a framework for health sector reform instituted by the Federal Ministry of Health (FMOH). The approved OHP went through all stages required for policy development unlike the previous attempts. Three groups of actors played crucial roles in the process, namely academics/researchers, development partners and policy makers. They either had decision making powers or influenced policy through funding or technical ability to generate credible research evidence, all sharing a common interest in developing the OHP. Although evidence was used to inform the development of the policy, the complex interactions between the context and actors facilitated its approval. The OHP development succeeded through a complex inter-relationship of context, process and actors, clearly illustrating that none of these factors could have, in isolation, catalyzed the policy development. Availability of evidence is necessary but not sufficient for developing policies in this area. Wider socio-political contexts in which actors develop policy can facilitate and/or constrain actors' roles and interests as well as policy process. These must be taken into consideration at stages of policy development in order to produce policies that will strengthen the health system, especially in low and middle-income countries, where policy processes and influences can be often less than transparent.

Dimpled ball grid array process development for space flight applications

NASA Technical Reports Server (NTRS)

Barr, S. L.; Mehta, A.

2000-01-01

A 472 dimpled ball grid array (D-BGA) package has not been used in past space flight environments, therefore it was necessary to develop a process that would yield robust and reliable solder joints. The process developing assembly, inspection and rework techniques, were verified by conducting environmental tests. Since the 472 D-BGA packages passed the above environmental tests within the specifications, the process was successfully developed for space flight electronics.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Volume 1; Appendices

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g., missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Appendices; Volume 2

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g. missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

77 FR 17460 - Multistakeholder Process To Develop Consumer Data Privacy Codes of Conduct

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

.... 120214135-2203-02] RIN 0660-XA27 Multistakeholder Process To Develop Consumer Data Privacy Codes of Conduct... request for public comments on the multistakeholder process to develop consumer data privacy codes of...-multistakeholder-process without change. All personal identifying information (for example, name, address...

77 FR 50724 - Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Developing Software Life Cycle Processes for Digital... Software Life Cycle Processes for Digital Computer Software used in Safety Systems of Nuclear Power Plants... clarifications, the enhanced consensus practices for developing software life-cycle processes for digital...

Technology development for lunar base water recycling

NASA Technical Reports Server (NTRS)

Schultz, John R.; Sauer, Richard L.

1992-01-01

This paper will review previous and ongoing work in aerospace water recycling and identify research activities required to support development of a lunar base. The development of a water recycle system for use in the life support systems envisioned for a lunar base will require considerable research work. A review of previous work on aerospace water recycle systems indicates that more efficient physical and chemical processes are needed to reduce expendable and power requirements. Development work on biological processes that can be applied to microgravity and lunar environments also needs to be initiated. Biological processes are inherently more efficient than physical and chemical processes and may be used to minimize resupply and waste disposal requirements. Processes for recovering and recycling nutrients such as nitrogen, phosphorus, and sulfur also need to be developed to support plant growth units. The development of efficient water quality monitors to be used for process control and environmental monitoring also needs to be initiated.

Is There Room for "Development" in Developmental Models of Information Processing Biases to Threat in Children and Adolescents?

ERIC Educational Resources Information Center

Field, Andy P.; Lester, Kathryn J.

2010-01-01

Clinical and experimental theories assume that processing biases in attention and interpretation are a causal mechanism through which anxiety develops. Despite growing evidence that these processing biases are present in children and, therefore, develop long before adulthood, these theories ignore the potential role of child development. This…

Implementing a Process to Measure Return on Investment for Nursing Professional Development.

PubMed

Garrison, Elisabeth; Beverage, Jodie

Return on investment (ROI) is one way to quantify the value that nursing professional development brings to the organization. This article describes a process to begin tracking ROI for nursing professional development. Implementing a process of tracking nursing professional development practitioners' ROI increased awareness of the financial impact and effectiveness of the department.

42 CFR 137.295 - May Self-Governance Tribes elect to develop their own environmental review process?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May Self-Governance Tribes elect to develop their... SELF-GOVERNANCE Construction Nepa Process § 137.295 May Self-Governance Tribes elect to develop their own environmental review process? Yes, Self-Governance Tribes may develop their own environmental...

Women Education and Economic Development in Kenya: Implications for Curriculum Development and Implementation Processes

ERIC Educational Resources Information Center

Syomwene, Anne; Kindiki, Jonah Nyaga

2015-01-01

This paper is a discussion of the relationship between women education and sustainable economic development in Kenya and its implications for curriculum development and implementation processes. The argument advanced in this paper is that the solution to the development problems in Kenya and other developing nations lies on women education.…

Introduction of male circumcision for HIV prevention in Uganda: analysis of the policy process.

PubMed

Odoch, Walter Denis; Kabali, Kenneth; Ankunda, Racheal; Zulu, Joseph Mumba; Tetui, Moses

2015-06-20

Health policy analysis is important for all health policies especially in fields with ever changing evidence-based interventions such as HIV prevention. However, there are few published reports of health policy analysis in sub-Saharan Africa in this field. This study explored the policy process of the introduction of male circumcision (MC) for HIV prevention in Uganda in order to inform the development processes of similar health policies. Desk review of relevant documents was conducted between March and May 2012. Thematic analysis was used to analyse the data. Conceptual frameworks that demonstrate the interrelationship within the policy development processes and influence of actors in the policy development processes guided the analysis. Following the introduction of MC on the national policy agenda in 2007, negotiation and policy formulation preceded its communication and implementation. Policy proponents included academic researchers in the early 2000s and development partners around 2007. Favourable contextual factors that supported the development of the policy included the rising HIV prevalence, adoption of MC for HIV prevention in other sub-Saharan African countries, and expertise on MC. Additionally, the networking capability of proponents facilitated the change in position of non-supportive or neutral actors. Non-supportive and neutral actors in the initial stages of the policy development process included the Ministry of Health, traditional and Muslim leaders, and the Republican President. Using political authority, legitimacy, and charisma, actors who opposed the policy tried to block the policy development process. Researchers' initial disregard of the Ministry of Health in the research process of MC and the missing civil society advocacy arm contributed to delays in the policy development process. This study underscores the importance of securing top political leadership as well as key implementing partners' support in policy development processes. Equally important is the appreciation of the various forms of actors' power and how such power shapes the policy agenda, development process, and content.

A Prototype for the Support of Integrated Software Process Development and Improvement

NASA Astrophysics Data System (ADS)

Porrawatpreyakorn, Nalinpat; Quirchmayr, Gerald; Chutimaskul, Wichian

An efficient software development process is one of key success factors for quality software. Not only can the appropriate establishment but also the continuous improvement of integrated project management and of the software development process result in efficiency. This paper hence proposes a software process maintenance framework which consists of two core components: an integrated PMBOK-Scrum model describing how to establish a comprehensive set of project management and software engineering processes and a software development maturity model advocating software process improvement. Besides, a prototype tool to support the framework is introduced.

The software development process at the Chandra X-ray Center

NASA Astrophysics Data System (ADS)

Evans, Janet D.; Evans, Ian N.; Fabbiano, Giuseppina

2008-08-01

Software development for the Chandra X-ray Center Data System began in the mid 1990's, and the waterfall model of development was mandated by our documents. Although we initially tried this approach, we found that a process with elements of the spiral model worked better in our science-based environment. High-level science requirements are usually established by scientists, and provided to the software development group. We follow with review and refinement of those requirements prior to the design phase. Design reviews are conducted for substantial projects within the development team, and include scientists whenever appropriate. Development follows agreed upon schedules that include several internal releases of the task before completion. Feedback from science testing early in the process helps to identify and resolve misunderstandings present in the detailed requirements, and allows review of intangible requirements. The development process includes specific testing of requirements, developer and user documentation, and support after deployment to operations or to users. We discuss the process we follow at the Chandra X-ray Center (CXC) to develop software and support operations. We review the role of the science and development staff from conception to release of software, and some lessons learned from managing CXC software development for over a decade.

Technology and development requirements for advanced coal conversion systems

NASA Technical Reports Server (NTRS)

1981-01-01

A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.

Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

NASA Astrophysics Data System (ADS)

Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

Exploring the Role of Usability in the Software Process: A Study of Irish Software SMEs

NASA Astrophysics Data System (ADS)

O'Connor, Rory V.

This paper explores the software processes and usability techniques used by Small and Medium Enterprises (SMEs) that develop web applications. The significance of this research is that it looks at development processes used by SMEs in order to assess to what degree usability is integrated into the process. This study seeks to gain an understanding into the level of awareness of usability within SMEs today and their commitment to usability in practice. The motivation for this research is to explore the current development processes used by SMEs in developing web applications and to understand how usability is represented in those processes. The background for this research is provided by the growth of the web application industry beyond informational web sites to more sophisticated applications delivering a broad range of functionality. This paper presents an analysis of the practices of several Irish SMEs that develop web applications through a series of case studies. With the focus on SMEs that develop web applications as Management Information Systems and not E-Commerce sites, informational sites, online communities or web portals. This study gathered data about the usability techniques practiced by these companies and their awareness of usability in the context of the software process in those SMEs. The contribution of this study is to further the understanding of the current role of usability within the software development processes of SMEs that develop web applications.

Digital Signal Processing Based Biotelemetry Receivers

NASA Technical Reports Server (NTRS)

Singh, Avtar; Hines, John; Somps, Chris

1997-01-01

This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

Proposal for establishing structure and process in the development of implicit chiropractic standards of care and practice guidelines.

PubMed

Hansen, D T; Adams, A H; Meeker, W C; Phillips, R B

1992-09-01

With the advent of health care's "era of accountability", the chiropractic profession is now faced with generating implicit standards and guidelines for care or having it done for us by outside agencies. Already we see chiropractic groups in individual states and provinces being pressured into naive efforts of guideline development. Current knowledge and experience are available through recent health care literature that clearly defines the structure and process of guideline development and offers suggestions on how to measure outcomes of those processes. In addition, the United States Congress has directed a new federal agency to oversee this activity and monitor outcomes of quality improvement programs. The time has come for the chiropractic profession to define its exact role in health care delivery and develop implicit standards of care and practice guidelines. This sentinel effort should be managed by a commissioned body of empaneled experts that generally represent the academic and clinical chiropractic profession. A protocol for selection of these panelists and the panel chairperson needs to be developed and memorialized. Appropriate methodology (with definitions) needs to be developed for the process of standards/guideline development. Adherence to the accepted structure and process of guideline development will ensure the continuity of this dynamic process in the coming generations. This proposal offers a preliminary definition of the structure and process, including a "seed" policy statement and decision flow chart, specific to guideline development. Once the structure and process of guideline development for chiropractic are defined, the profession can then present this product to federal and state agencies, private sector health care purchasers, patient advocacy groups and other stakeholders of chiropractic care.(ABSTRACT TRUNCATED AT 250 WORDS)

An Information System Development Method Combining Business Process Modeling with Executable Modeling and its Evaluation by Prototyping

NASA Astrophysics Data System (ADS)

Okawa, Tsutomu; Kaminishi, Tsukasa; Hirabayashi, Syuichi; Suzuki, Ryo; Mitsui, Hiroyasu; Koizumi, Hisao

The business in the enterprise is closely related with the information system to such an extent that the business activities are difficult without the information system. The system design technique that considers the business process well, and that enables a quick system development is requested. In addition, the demand for the development cost is also severe than before. To cope with the current situation, the modeling technology named BPM(Business Process Management/Modeling)is drawing attention and becoming important as a key technology. BPM is a technology to model business activities as business processes and visualize them to improve the business efficiency. However, a general methodology to develop the information system using the analysis result of BPM doesn't exist, and a few development cases are reported. This paper proposes an information system development method combining business process modeling with executable modeling. In this paper we describe a guideline to support consistency of development and development efficiency and the framework enabling to develop the information system from model. We have prototyped the information system with the proposed method and our experience has shown that the methodology is valuable.

Distillate fuel-oil processing for phosphoric acid fuel cell power plants

NASA Astrophysics Data System (ADS)

1980-02-01

Efforts to develop distillate oil steam reforming processes are reviewed, and the applicability of these processes for integration with the fuel cell are discussed. The development efforts can be grouped into the following processing approaches: high temperature steam reforming; autothermal reforming; autothermal gasification; and ultra desulfurization followed by steam reforming. Sulfur in the feed is a problem in the process development.

Facilitating Behavior Change with Low-Literacy Patient Education Materials

ERIC Educational Resources Information Center

Seligman, Hilary K.; Wallace, Andrea S.; DeWalt, Darren A.; Schillinger, Dean; Arnold, Connie L.; Shilliday, Betsy Bryant; Delgadillo, Adriana; Bengal, Nikki; Davis, Terry C.

2007-01-01

Objective: To describe a process for developing low-literacy health education materials that increase knowledge and activate patients toward healthier behaviors. Methods: We developed a theoretically informed process for developing educational materials. This process included convening a multidisciplinary creative team, soliciting stakeholder…

The Role of the University in the Development Process of Less Developed Countries

ERIC Educational Resources Information Center

Tinbergen, J.

1978-01-01

The role of the university in the development process must be dealt with in an environment of widespread great poverty characteristic of the larger part of the developing world. Focuses on development policy and the satisfaction of human basic needs as the highest priority for the university. (Author/RK)

24 CFR 972.133 - Public and resident consultation process for developing a conversion plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Public and resident consultation process for developing a conversion plan. 972.133 Section 972.133 Housing and Urban Development... ASSISTANCE Required Conversion of Public Housing Developments Conversion Plans § 972.133 Public and resident...

Professional Development Sites: Revitalizing Preservice Education in Middle Schools.

ERIC Educational Resources Information Center

Bell, Nancy M.

This case study reports on the experiences of teachers and student teachers during the process of developing and implementing professional development sites (PDSs) at one urban and two rural middle schools. The study examines the phases of development that teachers go through in the process of developing PDSs and how teachers' level of development…

Some Evaluative Comments Based on a Review of the Curriculum Development Processes Operating in the Stanford Program on International and Cross Cultural Education. [and] A Review of the Curriculum. Development Processes Operating in the Stanford Program on International and Cross-Cultural Education.

ERIC Educational Resources Information Center

Kennedy, Kerry J.

The processes of instructional materials development and dissemination used in four Stanford Program on International and Cross Cultural Education (SPICE) projects dealing with Latin America, Africa, China, and Japan are described, and evaluative comments based on a review of the curriculum development process are made. The major purpose of the…

The Racial and Ethnic Identity Formation Process of Second-Generation Asian Indian Americans: A Phenomenological Study.

PubMed

Iwamoto, Derek Kenji; Negi, Nalini Junko; Partiali, Rachel Negar; Creswell, John W

2013-10-01

This phenomenological study elucidates the identity development processes of 12 second-generation adult Asian Indian Americans. The results identify salient sociocultural factors and multidimensional processes of racial and ethnic identity development. Discrimination, parental, and community factors seemed to play a salient role in influencing participants' racial and ethnic identity development. The emergent Asian Indian American racial and ethnic identity model provides a contextualized overview of key developmental periods and turning points within the process of identity development.

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

NASA Technical Reports Server (NTRS)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

The Racial and Ethnic Identity Formation Process of Second-Generation Asian Indian Americans: A Phenomenological Study

PubMed Central

Iwamoto, Derek Kenji; Negi, Nalini Junko; Partiali, Rachel Negar; Creswell, John W.

2014-01-01

This phenomenological study elucidates the identity development processes of 12 second-generation adult Asian Indian Americans. The results identify salient sociocultural factors and multidimensional processes of racial and ethnic identity development. Discrimination, parental, and community factors seemed to play a salient role in influencing participants’ racial and ethnic identity development. The emergent Asian Indian American racial and ethnic identity model provides a contextualized overview of key developmental periods and turning points within the process of identity development. PMID:25298617

Self-Reacting Friction Stir Welding for Aluminum Complex Curvature Applications

NASA Technical Reports Server (NTRS)

Brown, Randy J.; Martin, W.; Schneider, J.; Hartley, P. J.; Russell, Carolyn; Lawless, Kirby; Jones, Chip

2003-01-01

This viewgraph representation provides an overview of sucessful research conducted by Lockheed Martin and NASA to develop an advanced self-reacting friction stir technology for complex curvature aluminum alloys. The research included weld process development for 0.320 inch Al 2219, sucessful transfer from the 'lab' scale to the production scale tool and weld quality exceeding strenght goals. This process will enable development and implementation of large scale complex geometry hardware fabrication. Topics covered include: weld process development, weld process transfer, and intermediate hardware fabrication.

An assessment of space shuttle flight software development processes

NASA Technical Reports Server (NTRS)

1993-01-01

In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

[Research advances in secondary development of Chinese patent medicines based on quality by design concept].

PubMed

Gong, Xing-Chu; Chen, Teng; Qu, Hai-Bin

2017-03-01

Quality by design (QbD) concept is an advanced pharmaceutical quality control concept. The application of QbD concept in the research and development of pharmaceutical processes of traditional Chinese medicines (TCM) mainly contains five parts, including the definition of critical processes and their evaluation criteria, the determination of critical process parameters and critical material attributes, the establishment of quantitative models, the development of design space, as well as the application and continuous improvement of control strategy. In this work, recent research advances in QbD concept implementation methods in the secondary development of Chinese patent medicines were reviewed, and five promising fields of the implementation of QbD concept were pointed out, including the research and development of TCM new drugs and Chinese medicine granules for formulation, modeling of pharmaceutical processes, development of control strategy based on industrial big data, strengthening the research of process amplification rules, and the development of new pharmaceutical equipment.. Copyright© by the Chinese Pharmaceutical Association.

A neuroconstructivist model of past tense development and processing.

PubMed

Westermann, Gert; Ruh, Nicolas

2012-07-01

We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated account of characteristic errors during learning the past tense, adult generalization to pseudoverbs, and dissociations between verbs observed after brain damage in aphasic patients. We put forward a theory of verb inflection in which a functional processing architecture develops through interactions between experience-dependent brain development and the structure of the environment, in this case, the statistical properties of verbs in the language. The outcome of this process is a structured processing system giving rise to graded dissociations between verbs that are easy and verbs that are hard to learn and process. In contrast to dual-mechanism accounts of inflection, we argue that describing dissociations as a dichotomy between regular and irregular verbs is a post hoc abstraction and is not linked to underlying processing mechanisms. We extend current single-mechanism accounts of inflection by highlighting the role of structural adaptation in development and in the formation of the adult processing system. In contrast to some single-mechanism accounts, we argue that the link between irregular inflection and verb semantics is not causal and that existing data can be explained on the basis of phonological representations alone. This work highlights the benefit of taking brain development seriously in theories of cognitive development. Copyright 2012 APA, all rights reserved.

The Importance of Process-Oriented Accessibility Guidelines for Web Developers.

PubMed

Steen-Hansen, Linn; Fagernes, Siri

2016-01-01

Current accessibility research shows that in the web development, the process itself may lead to inaccessible web sites and applications. Common practices typically do not allow sufficient testing. The focus is mainly on complying with minimum standards, and treating accessibility compliance as a sort of bug-fixing process, missing the user perspective. In addition, there is an alarming lack of knowledge and experience with accessibility issues. It has also been argued that bringing accessibility into the development process at all stages is the only way to achieve the highest possible level of accessibility. The work presented in this paper is based on a previous project focusing on guidelines for developing accessible rich Internet applications. The guidelines were classified as either process-oriented or technology-oriented. In this paper, we examine the process-oriented guidelines and give a practical perspective on how these guidelines will make the development process more accessibility-friendly.

Achieving continuous manufacturing for final dosage formation: challenges and how to meet them. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Byrn, Stephen; Futran, Maricio; Thomas, Hayden; Jayjock, Eric; Maron, Nicola; Meyer, Robert F; Myerson, Allan S; Thien, Michael P; Trout, Bernhardt L

2015-03-01

We describe the key issues and possibilities for continuous final dosage formation, otherwise known as downstream processing or drug product manufacturing. A distinction is made between heterogeneous processing and homogeneous processing, the latter of which is expected to add more value to continuous manufacturing. We also give the key motivations for moving to continuous manufacturing, some of the exciting new technologies, and the barriers to implementation of continuous manufacturing. Continuous processing of heterogeneous blends is the natural first step in converting existing batch processes to continuous. In heterogeneous processing, there are discrete particles that can segregate, versus in homogeneous processing, components are blended and homogenized such that they do not segregate. Heterogeneous processing can incorporate technologies that are closer to existing technologies, where homogeneous processing necessitates the development and incorporation of new technologies. Homogeneous processing has the greatest potential for reaping the full rewards of continuous manufacturing, but it takes long-term vision and a more significant change in process development than heterogeneous processing. Heterogeneous processing has the detriment that, as the technologies are adopted rather than developed, there is a strong tendency to incorporate correction steps, what we call below "The Rube Goldberg Problem." Thus, although heterogeneous processing will likely play a major role in the near-term transformation of heterogeneous to continuous processing, it is expected that homogeneous processing is the next step that will follow. Specific action items for industry leaders are: Form precompetitive partnerships, including industry (pharmaceutical companies and equipment manufacturers), government, and universities. These precompetitive partnerships would develop case studies of continuous manufacturing and ideally perform joint-technology development, including development of small-scale equipment and processes. Develop ways to invest internally in continuous manufacturing. How best to do this will depend on the specifics of a given organization, in particular the current development projects. Upper managers will need to energize their process developers to incorporate continuous manufacturing in at least part of their processes to gain experience and demonstrate directly the benefits. Training of continuous manufacturing technologies, organizational approaches, and regulatory approaches is a key area that industrial leaders should pursue together. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Developing Cultural Literacy through the Writing Process: Empowering All Learners.

ERIC Educational Resources Information Center

Palmer, Barbara C.; And Others

Combining the expansion of cultural literacy with the development of process-based writing, this book addresses each stage of the writing process, with emphasis on the recursive and overlapping nature of these stages. Numerous related model activities at the end of each chapter show how to develop the writing process, while expanding the writer's…

Development and efficiency assessment of process lubrication for hot forging

NASA Astrophysics Data System (ADS)

Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

2017-10-01

The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

Facilitating Behavior Change With Low-literacy Patient Education Materials

PubMed Central

Seligman, Hilary K.; Wallace, Andrea S.; DeWalt, Darren A.; Schillinger, Dean; Arnold, Connie L.; Shilliday, Betsy Bryant; Delgadillo, Adriana; Bengal, Nikki; Davis, Terry C.

2014-01-01

Objective To describe a process for developing low-literacy health education materials that increase knowledge and activate patients toward healthier behaviors. Methods We developed a theoretically informed process for developing educational materials. This process included convening a multidisciplinary creative team, soliciting stakeholder input, identifying key concepts to be communicated, mapping concepts to a behavioral theory, creating a supporting behavioral intervention, designing and refining materials, and assessing efficacy. Results We describe the use of this process to develop a diabetes self-management guide. Conclusions Developing low-literacy health education materials that will activate patients toward healthier behaviors requires attention to factors beyond reading level. PMID:17931139

Computer-aided software development process design

NASA Technical Reports Server (NTRS)

Lin, Chi Y.; Levary, Reuven R.

1989-01-01

The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

Developing a Phonological Awareness Curriculum: Reflections on an Implementation Science Framework

ERIC Educational Resources Information Center

Goldstein, Howard; Olszewski, Arnold

2015-01-01

Purpose: This article describes the process of developing and implementing a supplemental early literacy curriculum designed for preschoolers demonstrating delays in literacy development. Method: Intervention research and implementation research have traditionally been viewed as sequential processes. This article illustrates a process of…

43 CFR 10005.17 - Plan development process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Plan development process. 10005.17 Section 10005.17 Public Lands: Interior Regulations Relating to Public Lands (Continued) UTAH RECLAMATION...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of the...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

Recent Developments in Advanced Automated Post-Processing at AMOS

DTIC Science & Technology

2014-09-01

Borelli KJS Consulting Lisa Thompson Air Force Research Laboratory ABSTRACT A new automated post-processing system has been developed to...the existing algorithms in addition to the development of new data processing features. 6. REFERENCES 1 Matson, C.L., Beckner, C.C., Borelli , K

Flood replenishment: a new method of processor control.

PubMed

Frank, E D; Gray, J E; Wilken, D A

1980-01-01

In mechanized radiographic film processors that process medium to low volumes of film, roll films, and those that process single-emulsion films from nuclear medicine scans, computed tomography, and ultrasound, it is difficult to maintain the developer solution at a stable processing level. We describe our experience using flood replenishment, which is a method in which developer replenisher containing starter solution is introduced in the processor at timed intervals, independent of the number of films being processed. By this process, a stable level of developer activity is maintained in a processor used to develop a medium to low volume of single-emulsion film.

Case study: Lockheed-Georgia Company integrated design process

NASA Technical Reports Server (NTRS)

Waldrop, C. T.

1980-01-01

A case study of the development of an Integrated Design Process is presented. The approach taken in preparing for the development of an integrated design process includes some of the IPAD approaches such as developing a Design Process Model, cataloging Technical Program Elements (TPE's), and examining data characteristics and interfaces between contiguous TPE's. The implementation plan is based on an incremental development of capabilities over a period of time with each step directed toward, and consistent with, the final architecture of a total integrated system. Because of time schedules and different computer hardware, this system will not be the same as the final IPAD release; however, many IPAD concepts will no doubt prove applicable as the best approach. Full advantage will be taken of the IPAD development experience. A scenario that could be typical for many companies, even outside the aerospace industry, in developing an integrated design process for an IPAD-type environment is represented.

[Development of Nanotechnology for X-Ray Astronomy Instrumentation

NASA Technical Reports Server (NTRS)

Schattenburg, Mark L.

2004-01-01

This Research Grant provides support for development of nanotechnology for x-ray astronomy instrumentation. MIT has made significant progress in several development areas. In the last year we have made considerable progress in demonstrating the high-fidelity patterning and replication of x-ray reflection gratings. We developed a process for fabricating blazed gratings in silicon with extremely smooth and sharp sawtooth profiles, and developed a nanoimprint process for replication. We also developed sophisticated new fixturing for holding thin optics during metrology without causing distortion. We developed a new image processing algorithm for our Shack-Hartmann tool that uses Zernike polynomials. This has resulted in much more accurate and repeatable measurements on thin optics.

The Knowledge-Based Software Assistant: Beyond CASE

NASA Technical Reports Server (NTRS)

Carozzoni, Joseph A.

1993-01-01

This paper will outline the similarities and differences between two paradigms of software development. Both support the whole software life cycle and provide automation for most of the software development process, but have different approaches. The CASE approach is based on a set of tools linked by a central data repository. This tool-based approach is data driven and views software development as a series of sequential steps, each resulting in a product. The Knowledge-Based Software Assistant (KBSA) approach, a radical departure from existing software development practices, is knowledge driven and centers around a formalized software development process. KBSA views software development as an incremental, iterative, and evolutionary process with development occurring at the specification level.

High flow rate development: process optimization using megasonic immersion development (MID)

NASA Astrophysics Data System (ADS)

Courboin, Daniel; Choi, Jong Woo; Jung, Sang Hyun; Baek, Seung Hee; Kim, Lee Ju

2004-12-01

In previous study the high impact of development by-products on Critical Dimension (CD) through the microloading effect has been demonstrated for a Novolak resist. In this paper, through further tests involving Chemically Amplified Resist (CAR) and Novolak resist, the microloading effect of development is characterized and tentative mechanism is presented. Megasonic Immersion Development (MID), a high flow rate development technique similar to the Proximity Gap Suction Development (PGSD), was used and compared with spin spray development and puddle development. On TOK IP3600, a Novolak resist, we have explored a wide range of process conditions with MID. Developer temperature was varied from 5°C to 40°C with TMAH developer concentration of 1.9% and 2.38% resulting in an isofocal dose range of 90mJ to 190mJ. Exposure Focus Matrix (EFM) with a specific microloading pattern and resist cross sections were performed. The best conditions are quite far from the standard process advised by the resist supplier. Very nice standing wave profile was obtained at high temperature development. On CAR, JEOL 9000MVII, a 50kV e-beam vector scan tool, and ETEC ALTA 4300, a DUV raster scan tool, were used with different develop process techniques including MID. FujiFilm Arch FEP-171 positive CAR and Sumitomo NEB-22 negative CAR were used on 50kV writing tool. Sumitomo PEK-130 was used on DUV writing tool. FEP-171 and PEK-1300 show microloading effect on high density patterns but not NEB-22. MID shows also improved reproduction of develop features in the chrome and a 20% improvement of CD uniformity. The results of this study seem to indicate that a closer look in their development process is needed for 90nm and 65nm technologies.

Transforming nanomedicine manufacturing toward Quality by Design and microfluidics.

PubMed

Colombo, Stefano; Beck-Broichsitter, Moritz; Bøtker, Johan Peter; Malmsten, Martin; Rantanen, Jukka; Bohr, Adam

2018-04-05

Nanopharmaceuticals aim at translating the unique features of nano-scale materials into therapeutic products and consequently their development relies critically on the progression in manufacturing technology to allow scalable processes complying with process economy and quality assurance. The relatively high failure rate in translational nanopharmaceutical research and development, with respect to new products on the market, is at least partly due to immature bottom-up manufacturing development and resulting sub-optimal control of quality attributes in nanopharmaceuticals. Recently, quality-oriented manufacturing of pharmaceuticals has undergone an unprecedented change toward process and product development interaction. In this context, Quality by Design (QbD) aims to integrate product and process development resulting in an increased number of product applications to regulatory agencies and stronger proprietary defense strategies of process-based products. Although QbD can be applied to essentially any production approach, microfluidic production offers particular opportunities for QbD-based manufacturing of nanopharmaceuticals. Microfluidics provides unique design flexibility, process control and parameter predictability, and also offers ample opportunities for modular production setups, allowing process feedback for continuously operating production and process control. The present review aims at outlining emerging opportunities in the synergistic implementation of QbD strategies and microfluidic production in contemporary development and manufacturing of nanopharmaceuticals. In doing so, aspects of design and development, but also technology management, are reviewed, as is the strategic role of these tools for aligning nanopharmaceutical innovation, development, and advanced industrialization in the broader pharmaceutical field. Copyright © 2018 Elsevier B.V. All rights reserved.

Development of shared decision-making resources to help inform difficult healthcare decisions: An example focused on dysvascular partial foot and transtibial amputations.

PubMed

Quigley, Matthew; Dillon, Michael P; Fatone, Stefania

2018-02-01

Shared decision making is a consultative process designed to encourage patient participation in decision making by providing accurate information about the treatment options and supporting deliberation with the clinicians about treatment options. The process can be supported by resources such as decision aids and discussion guides designed to inform and facilitate often difficult conversations. As this process increases in use, there is opportunity to raise awareness of shared decision making and the international standards used to guide the development of quality resources for use in areas of prosthetic/orthotic care. To describe the process used to develop shared decision-making resources, using an illustrative example focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Development process: The International Patient Decision Aid Standards were used to guide the development of the decision aid and discussion guide focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Examples from these shared decision-making resources help illuminate the stages of development including scoping and design, research synthesis, iterative development of a prototype, and preliminary testing with patients and clinicians not involved in the development process. Lessons learnt through the process, such as using the International Patient Decision Aid Standards checklist and development guidelines, may help inform others wanting to develop similar shared decision-making resources given the applicability of shared decision making to many areas of prosthetic-/orthotic-related practice. Clinical relevance Shared decision making is a process designed to guide conversations that help patients make an informed decision about their healthcare. Raising awareness of shared decision making and the international standards for development of high-quality decision aids and discussion guides is important as the approach is introduced in prosthetic-/orthotic-related practice.

Development of environmentally conscious cleaning process for leadless chip carrier assemblies. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, B.E.

1995-04-01

A cross-functional team of process, product, quality, material, and design lab engineers was assembled to develop an environmentally friendly cleaning process for leadless chip carrier assemblies (LCCAs). Using flush and filter testing, Auger surface analysis, GC-Mass spectrophotometry, production yield results, and electrical testing results over an extended testing period, the team developed an aqueous cleaning process for LCCAs. The aqueous process replaced the Freon vapor degreasing/ultrasonic rinse process.

Small Business Apparel Retailing in Jamaica: An Exploratory Investigation into Product Development Processes and Practices

ERIC Educational Resources Information Center

Johnson-Leslie, Natalie; Gaskill, LuAnn R.

2006-01-01

While the process and practices of retail product development in developed countries have been documented, a void exists in descriptive analysis regarding retail product development in an international setting. The primary purpose of this study was to explore small business apparel retailing, and specifically the retail product development process…

Developmental State Policy, Educational Development, and Economic Development: Policy Processes in South Korea (1961-1979)

ERIC Educational Resources Information Center

Kim, Ki Su

2012-01-01

This paper explores two inter-connected issues--the state's role in educational development and educational contribution to economic development--in the policy processes entailed by the South Korean state's pursuit of economic development during the Park Chung Hi era, 1961-1979. It disputes the statist view that South Korea's economic development…

Framework programmable platform for the advanced software development workstation. Integration mechanism design document

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Reddy, Uday; Ackley, Keith; Futrell, Mike

1991-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by this model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated.

Incremental development and prototyping in current laboratory software development projects: Preliminary analysis

NASA Technical Reports Server (NTRS)

Griesel, Martha Ann

1988-01-01

Several Laboratory software development projects that followed nonstandard development processes, which were hybrids of incremental development and prototyping, are being studied. Factors in the project environment leading to the decision to use a nonstandard development process and affecting its success are analyzed. A simple characterization of project environment based on this analysis is proposed, together with software development approaches which have been found effective for each category. These approaches include both documentation and review requirements.

Large-scale production of diesel-like biofuels - process design as an inherent part of microorganism development.

PubMed

Cuellar, Maria C; Heijnen, Joseph J; van der Wielen, Luuk A M

2013-06-01

Industrial biotechnology is playing an important role in the transition to a bio-based economy. Currently, however, industrial implementation is still modest, despite the advances made in microorganism development. Given that the fuels and commodity chemicals sectors are characterized by tight economic margins, we propose to address overall process design and efficiency at the start of bioprocess development. While current microorganism development is targeted at product formation and product yield, addressing process design at the start of bioprocess development means that microorganism selection can also be extended to other critical targets for process technology and process scale implementation, such as enhancing cell separation or increasing cell robustness at operating conditions that favor the overall process. In this paper we follow this approach for the microbial production of diesel-like biofuels. We review current microbial routes with both oleaginous and engineered microorganisms. For the routes leading to extracellular production, we identify the process conditions for large scale operation. The process conditions identified are finally translated to microorganism development targets. We show that microorganism development should be directed at anaerobic production, increasing robustness at extreme process conditions and tailoring cell surface properties. All the same time, novel process configurations integrating fermentation and product recovery, cell reuse and low-cost technologies for product separation are mandatory. This review provides a state-of-the-art summary of the latest challenges in large-scale production of diesel-like biofuels. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Model for Simulating a Spiral Software-Development Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Curley, Charles; Nayak, Umanath

2010-01-01

A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code), productivity (number of lines of code per hour), and number of defects per source line of code. The user provides the number of resources, the overall percent of effort that should be allocated to each process step, and the number of desired staff members for each step. The output of PATT includes the size of the product, a measure of effort, a measure of rework effort, the duration of the entire process, and the numbers of injected, detected, and corrected defects as well as a number of other interesting features. In the development of the present model, steps were added to the IEEE 12207 waterfall process, and this model and its implementing software were made to run repeatedly through the sequence of steps, each repetition representing an iteration in a spiral process. Because the IEEE 12207 model is founded on a waterfall paradigm, it enables direct comparison of spiral and waterfall processes. The model can be used throughout a software-development project to analyze the project as more information becomes available. For instance, data from early iterations can be used as inputs to the model, and the model can be used to estimate the time and cost of carrying the project to completion.

Biochemical Process Development and Integration | Bioenergy | NREL

Science.gov Websites

Process Development We develop and scale fermentation processes that produce fuels and chemicals from guide experimental designs. Our newly updated fermentation laboratory houses 38 bench-scale fermentors current projects cover the fermentation spectrum including anaerobic, micro-aerobic, aerobic, and gas-to

Automated Array Assembly, Phase 2

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1979-01-01

The solar cell module process development activities in the areas of surface preparation are presented. The process step development was carried out on texture etching including the evolution of a conceptual process model for the texturing process; plasma etching; and diffusion studies that focused on doped polymer diffusion sources. Cell processing was carried out to test process steps and a simplified diode solar cell process was developed. Cell processing was also run to fabricate square cells to populate sample minimodules. Module fabrication featured the demonstration of a porcelainized steel glass structure that should exceed the 20 year life goal of the low cost silicon array program. High efficiency cell development was carried out in the development of the tandem junction cell and a modification of the TJC called the front surface field cell. Cell efficiencies in excess of 16 percent at AM1 have been attained with only modest fill factors. The transistor-like model was proposed that fits the cell performance and provides a guideline for future improvements in cell performance.

Managing the Public Sector Research and Development Portfolio Selection Process: A Case Study of Quantitative Selection and Optimization

DTIC Science & Technology

2016-09-01

PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION by Jason A. Schwartz...PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION 5. FUNDING NUMBERS 6...describing how public sector organizations can implement a research and development (R&D) portfolio optimization strategy to maximize the cost

Designing Training Materials for Developing Countries.

ERIC Educational Resources Information Center

Rosenweig, Fred

1984-01-01

Describes four training guides developed by the Water and Sanitation for Health Project for use in rural water supply and sanitation projects in developing countries, explains the development process, offers insights gained from the process, and presents five considerations for designing training in third world countries. (MBR)

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production.

PubMed

Ott, Denise; Kralisch, Dana; Denčić, Ivana; Hessel, Volker; Laribi, Yosra; Perrichon, Philippe D; Berguerand, Charline; Kiwi-Minsker, Lioubov; Loeb, Patrick

2014-12-01

As the demand for new drugs is rising, the pharmaceutical industry faces the quest of shortening development time, and thus, reducing the time to market. Environmental aspects typically still play a minor role within the early phase of process development. Nevertheless, it is highly promising to rethink, redesign, and optimize process strategies as early as possible in active pharmaceutical ingredient (API) process development, rather than later at the stage of already established processes. The study presented herein deals with a holistic life-cycle-based process optimization and intensification of a pharmaceutical production process targeting a low-volume, high-value API. Striving for process intensification by transfer from batch to continuous processing, as well as an alternative catalytic system, different process options are evaluated with regard to their environmental impact to identify bottlenecks and improvement potentials for further process development activities. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Collaborative Measurement Development as a Tool in CBPR: Measurement Development and Adaptation within the Cultures of Communities

PubMed Central

Gonzalez, John; Trickett, Edison J.

2014-01-01

This paper describes the processes we engaged in to develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development. PMID:24748283

Collaborative measurement development as a tool in CBPR: measurement development and adaptation within the cultures of communities.

PubMed

Gonzalez, John; Trickett, Edison J

2014-09-01

This paper describes the processes we engaged into develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development.

Space experiment development process

NASA Technical Reports Server (NTRS)

Depauw, James F.

1987-01-01

Described is a process for developing space experiments utilizing the Space Shuttle. The role of the Principal Investigator is described as well as the Principal Investigator's relation with the project development team. Described also is the sequence of events from an early definition phase through the steps of hardware development. The major interactions between the hardware development program and the Shuttle integration and safety activities are also shown. The presentation is directed to people with limited Shuttle experiment experience. The objective is to summarize the development process, discuss the roles of major participants, and list some lessons learned. Two points should be made at the outset. First, no two projects are the same so the process varies from case to case. Second, the emphasis here is on Code EN/Microgravity Science and Applications Division (MSAD).

Annotation: Development of facial expression recognition from childhood to adolescence: behavioural and neurological perspectives.

PubMed

Herba, Catherine; Phillips, Mary

2004-10-01

Intact emotion processing is critical for normal emotional development. Recent advances in neuroimaging have facilitated the examination of brain development, and have allowed for the exploration of the relationships between the development of emotion processing abilities, and that of associated neural systems. A literature review was performed of published studies examining the development of emotion expression recognition in normal children and psychiatric populations, and of the development of neural systems important for emotion processing. Few studies have explored the development of emotion expression recognition throughout childhood and adolescence. Behavioural studies suggest continued development throughout childhood and adolescence (reflected by accuracy scores and speed of processing), which varies according to the category of emotion displayed. Factors such as sex, socio-economic status, and verbal ability may also affect this development. Functional neuroimaging studies in adults highlight the role of the amygdala in emotion processing. Results of the few neuroimaging studies in children have focused on the role of the amygdala in the recognition of fearful expressions. Although results are inconsistent, they provide evidence throughout childhood and adolescence for the continued development of and sex differences in amygdalar function in response to fearful expressions. Studies exploring emotion expression recognition in psychiatric populations of children and adolescents suggest deficits that are specific to the type of disorder and to the emotion displayed. Results from behavioural and neuroimaging studies indicate continued development of emotion expression recognition and neural regions important for this process throughout childhood and adolescence. Methodological inconsistencies and disparate findings make any conclusion difficult, however. Further studies are required examining the relationship between the development of emotion expression recognition and that of underlying neural systems, in particular subcortical and prefrontal cortical structures. These will inform understanding of the neural bases of normal and abnormal emotional development, and aid the development of earlier interventions for children and adolescents with psychiatric disorders.

NASA Procurement Career Development Program

NASA Technical Reports Server (NTRS)

1987-01-01

The NASA Procurement Career Development Program establishes an agency-wide framework for the management of career development activity in the procurement field. Within this framework, installations are encouraged to modify the various components to meet installation-specific mission and organization requirements. This program provides a systematic process for the assessment of and planning for the development, training, and education required to increase the employees' competence in the procurement work functions. It includes the agency-wide basic knowledge and skills by career field and level upon which individual and organizational development plans are developed. Also, it provides a system that is compatible with other human resource management and development systems, processes, and activities. The compatibility and linkage are important in fostering the dual responsibility of the individual and the organization in the career development process.

A Petri Net-Based Software Process Model for Developing Process-Oriented Information Systems

NASA Astrophysics Data System (ADS)

Li, Yu; Oberweis, Andreas

Aiming at increasing flexibility, efficiency, effectiveness, and transparency of information processing and resource deployment in organizations to ensure customer satisfaction and high quality of products and services, process-oriented information systems (POIS) represent a promising realization form of computerized business information systems. Due to the complexity of POIS, explicit and specialized software process models are required to guide POIS development. In this chapter we characterize POIS with an architecture framework and present a Petri net-based software process model tailored for POIS development with consideration of organizational roles. As integrated parts of the software process model, we also introduce XML nets, a variant of high-level Petri nets as basic methodology for business processes modeling, and an XML net-based software toolset providing comprehensive functionalities for POIS development.

Processes involved in the development of latent fingerprints using the cyanoacrylate fuming method.

PubMed

Lewis, L A; Smithwick, R W; Devault, G L; Bolinger, B; Lewis, S A

2001-03-01

Chemical processes involved in the development of latent fingerprints using the cyanoacrylate fuming method have been studied. Two major types of latent prints have been investigated-clean and oily prints. Scanning electron microscopy (SEM) has been used as a tool for determining the morphology of the polymer developed separately on clean and oily prints after cyanoacrylate fuming. A correlation between the chemical composition of an aged latent fingerprint, prior to development, and the quality of a developed fingerprint has been observed in the morphology. The moisture in the print prior to fuming has been found to be more important than the moisture in the air during fuming for the development of a useful latent print. In addition, the amount of time required to develop a high quality latent print has been found to be within 2 min. The cyanoacrylate polymerization process is extremely rapid. When heat is used to accelerate the fuming process, typically a period of 2 min is required to develop the print. The optimum development time depends upon the concentration of cyanoacrylate vapors within the enclosure.

The Establishment of a New Friction Stir Welding Process Development Facility at NASA/MSFC

NASA Technical Reports Server (NTRS)

Carter, Robert W.

2009-01-01

Full-scale weld process development is being performed at MSFC to develop the tools, fixtures, and facilities necessary for Ares I production. Full scale development in-house at MSFC fosters technical acuity within the NASA engineering community, and allows engineers to identify and correct tooling and equipment shortcomings before they become problems on the production floor. Finally, while the new weld process development facility is currently being outfitted in support of Ares I development, it has been established to support all future Constellation Program needs. In particular, both the RWT and VWT were sized with the larger Ares V hardware in mind.

The 4 T's of Adulthood Development.

ERIC Educational Resources Information Center

Wood, Joanne M.

Although it may be so subtle that it is not noticed or sudden and life altering, adult development occurs in a cycle of four inherent processes: transaction, transition, transformation, and transcendence. These processes exist in a cycle characterized by growth and development. The processes can be defined as follows: (1) transaction--personal,…

Developing Partnerships To Meet Clients' Needs in Changing Government Organizations: A Consultative Process.

ERIC Educational Resources Information Center

Borgen, William A.

2000-01-01

Outlines the development of partnerships across three employment-related government ministries, in a context of organizational restructuring and downsizing. Describes a consultation process regarding effective collaboration to assess unemployed clients' employability needs. In meetings, the workers developed a process that involved the cooperation…

Sustaining Innovation: Developing an Instructional Technology Assessment Process

ERIC Educational Resources Information Center

Carmo, Monica Cristina

2013-01-01

This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

24 CFR 291.304 - Bidding process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Bidding process. 291.304 Section 291.304 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... Family Mortgage Loans § 291.304 Bidding process. (a) Submission of bids. All bids must be submitted to...

Developing a taxonomy for mission architecture definition

NASA Technical Reports Server (NTRS)

Neubek, Deborah J.

1990-01-01

The Lunar and Mars Exploration Program Office (LMEPO) was tasked to define candidate architectures for the Space Exploration Initiative to submit to NASA senior management and an externally constituted Outreach Synthesis Group. A systematic, structured process for developing, characterizing, and describing the alternate mission architectures, and applying this process to future studies was developed. The work was done in two phases: (1) national needs were identified and categorized into objectives achievable by the Space Exploration Initiative; and (2) a program development process was created which both hierarchically and iteratively describes the program planning process.

Final Report - Energy Reduction and Advanced Water Removal via Membrane Solvent Extraction Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, John; Fanselow, Dan; Abbas, Charles

2014-08-06

3M and Archer Daniels Midland (ADM) collaborated with the U.S. Department of Energy (DOE) to develop and demonstrate a novel membrane solvent extraction (MSE) process that can substantially reduce energy and water consumption in ethanol production, and accelerate the fermentation process. A cross-flow membrane module was developed, using porous membrane manufactured by 3M. A pilot process was developed that integrates fermentation, MSE and vacuum distillation. Extended experiments of 48-72 hours each were conducted to develop the process, verify its performance and begin establishing commercial viability.

The Use of the Nursing Process in Spain as Compared to the United States and Canada.

PubMed

Huitzi-Egilegor, Joseba Xabier; Elorza-Puyadena, Maria Isabel; Asurabarrena-Iraola, Carmen

2017-05-18

To analyze the development of the nursing method process in Spain, and compare it with the development in the United States and Canada. This is a narrative review. The teaching of the nursing process in nursing schools started in Spain as from 1977 and that it started being used in professional practice in the 1990's. The development, the difficulties, the nursing models used and its application form are discussed. The development of the nursing process in the United States and Canada started to happen in Spain about 15-20 years later and, today, is a reality. Cross-sectional studies are needed to determine the changes in the development of the nursing process in Spain. © 2017 NANDA International, Inc.

The developmental processes for NANDA International Nursing Diagnoses.

PubMed

Scroggins, Leann M

2008-01-01

This study aims to provide a step-by-step procedural guideline for the development of a nursing diagnosis that meets the necessary criteria for inclusion in the NANDA International and NNN classification systems. The guideline is based on the processes developed by the Diagnosis Development Committee of NANDA International and includes the necessary processes for development of Actual, Wellness, Health Promotion, and Risk nursing diagnoses. Definitions of Actual, Wellness, Health Promotion, and Risk nursing diagnoses along with inclusion criteria and taxonomy rules have been incorporated into the guideline to streamline the development and review processes for submitted diagnoses. A step-by-step procedural guideline will assist the submitter to move efficiently and effectively through the submission process, resulting in increased submissions and enhancement of the NANDA International and NNN classification systems.

Developing clinical leadership capability.

PubMed

Pintar, Kristi A; Capuano, Terry A; Rosser, Gwendolyn D

2007-01-01

Nursing facilities must be committed to ongoing leadership development and to developing and retaining their staff in the increasingly competitive healthcare market. In this article, the authors share the processes involved in creating a focused small group approach to developing clinical leaders. Programmatic approaches to development, clarity of needs of those targeted for development, individual development plans, external expertise partnerships, and small group session dynamics are discussed. Applications of the process and lessons learned from the program will benefit others in their efforts to enhance organization succession planning, leadership development, group learning, and program administration.

24 CFR 2002.7 - OIG processing of requests.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false OIG processing of requests. 2002.7 Section 2002.7 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF INSPECTOR GENERAL, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT AVAILABILITY OF...

The Iterative Design Process in Research and Development: A Work Experience Paper

NASA Technical Reports Server (NTRS)

Sullivan, George F. III

2013-01-01

The iterative design process is one of many strategies used in new product development. Top-down development strategies, like waterfall development, place a heavy emphasis on planning and simulation. The iterative process, on the other hand, is better suited to the management of small to medium scale projects. Over the past four months, I have worked with engineers at Johnson Space Center on a multitude of electronics projects. By describing the work I have done these last few months, analyzing the factors that have driven design decisions, and examining the testing and verification process, I will demonstrate that iterative design is the obvious choice for research and development projects.

Clinical ethics protocols in the clinical ethics committees of Madrid.

PubMed

Herreros, Benjamin; Ramnath, Venktesh R; Bishop, Laura; Pintor, Emilio; Martín, María Dolores; Sánchez-González, Miguel A

2014-03-01

Currently, The nature and scope of Clinical Ethics Protocols (CEPs) in Madrid (Spain) are not well understood. The main objective is to describe the features of 'guideline/recommendation' type CEPs that have been or are being developed by existing Clinical Ethics Committees (CECs) in Madrid. Secondary objectives include characterisation of those CECs that have been the most prolific in reference to CEP creation and implementation and identification of any trends in future CEP development. We collected CEPs produced and in process by CECs accredited in the public hospitals in Madrid, Spain, from 1996 to 2008. CECs developed 30 CEPs, with 10 more in process. The most common topic is refusal of treatment (seven CEPs developed; two in process). If CEPs addressing terminal illness, Do-Not-Resuscitate orders and advance directives are placed into a separate 'ethical problems at the end of life' category, this CEP subject emerges as the most common (eight developed; four in process). There is a relationship between the age of the CEC and the development of CEPs (the oldest CECs have developed more CEPs). CECs now seem to be more likely to engage in CEP development. The CECs in Madrid, Spain, have developed a significant number of CEPs (30 in total and 10 in process) and there is a trend towards continued development. The most frequent topics are ethical problems at the end of life and refusal of treatment by the patient.

An exploratory survey of methods used to develop measures of performance

NASA Astrophysics Data System (ADS)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

Development of NASA's Sample Cartridge Assembly: Summary of GEDS Design, Development Testing, and Thermal Analyses

NASA Technical Reports Server (NTRS)

O'Connor, Brian; Hernandez, Deborah; Hornsby, Linda; Brown, Maria; Horton-Mullins, Kathryn

2017-01-01

Outline: Background of ISS (International Space Station) Material Science Research Rack; NASA SCA (Sample Cartridge Assembly) Design; GEDS (Gravitational Effects in Distortion in Sintering) Experiment Ampoule Design; Development Testing Summary; Thermal Modeling and Analysis. Summary: GEDS design development challenging (GEDS Ampoule design developed through MUGS (Microgravity) testing; Short duration transient sample processing; Unable to measure sample temperatures); MUGS Development testing used to gather data (Actual LGF (Low Gradient Furnace)-like furnace response; Provided sample for sintering evaluation); Transient thermal model integral to successful GEDS experiment (Development testing provided furnace response; PI (Performance Indicator) evaluation of sintering anchored model evaluation of processing durations; Thermal transient model used to determine flight SCA sample processing profiles).

Development of the Upgraded DC Brush Gear Motor for Spacebus Platforms

NASA Technical Reports Server (NTRS)

Berning, Robert H.; Viout, Olivier

2010-01-01

The obsolescence of materials and processes used in the manufacture of traditional DC brush gear motors has necessitated the development of an upgraded DC brush gear motor (UBGM). The current traditional DC brush gear motor (BGM) design was evaluated using Six-Sigma process to identify potential design and production process improvements. The development effort resulted in a qualified UBGM design which improved manufacturability and reduced production costs. Using Six-Sigma processes and incorporating lessons learned during the development process also improved motor performance for UBGM making it a more viable option for future use as a deployment mechanism in space flight applications.

The Use of Multi-Criteria Evaluation and Network Analysis in the Area Development Planning Process

DTIC Science & Technology

2013-03-01

layouts. The alternative layout scoring process, base in multi-criteria evaluation, returns a quantitative score for each alternative layout and a...The purpose of this research was to develop improvements to the area development planning process. These plans are used to improve operations within...an installation sub-section by altering the physical layout of facilities. One methodology was developed based on apply network analysis concepts to

Expertise Development With Different Types of Automation: A Function of Different Cognitive Abilities.

PubMed

Jipp, Meike

2016-02-01

I explored whether different cognitive abilities (information-processing ability, working-memory capacity) are needed for expertise development when different types of automation (information vs. decision automation) are employed. It is well documented that expertise development and the employment of automation lead to improved performance. Here, it is argued that a learner's ability to reason about an activity may be hindered by the employment of information automation. Additional feedback needs to be processed, thus increasing the load on working memory and decelerating expertise development. By contrast, the employment of decision automation may stimulate reasoning, increase the initial load on information-processing ability, and accelerate expertise development. Authors of past research have not investigated the interrelations between automation assistance, individual differences, and expertise development. Sixty-one naive learners controlled simulated air traffic with two types of automation: information automation and decision automation. Their performance was captured across 16 trials. Well-established tests were used to assess information-processing ability and working-memory capacity. As expected, learners' performance benefited from expertise development and decision automation. Furthermore, individual differences moderated the effect of the type of automation on expertise development: The employment of only information automation increased the load on working memory during later expertise development. The employment of decision automation initially increased the need to process information. These findings highlight the importance of considering individual differences and expertise development when investigating human-automation interaction. The results are relevant for selecting automation configurations for expertise development. © 2015, Human Factors and Ergonomics Society.

Rehabilitation centers in change: participatory methods for managing redesign and renovation.

PubMed

Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

2014-01-01

The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

An Ibm PC/AT-Based Image Acquisition And Processing System For Quantitative Image Analysis

NASA Astrophysics Data System (ADS)

Kim, Yongmin; Alexander, Thomas

1986-06-01

In recent years, a large number of applications have been developed for image processing systems in the area of biological imaging. We have already finished the development of a dedicated microcomputer-based image processing and analysis system for quantitative microscopy. The system's primary function has been to facilitate and ultimately automate quantitative image analysis tasks such as the measurement of cellular DNA contents. We have recognized from this development experience, and interaction with system users, biologists and technicians, that the increasingly widespread use of image processing systems, and the development and application of new techniques for utilizing the capabilities of such systems, would generate a need for some kind of inexpensive general purpose image acquisition and processing system specially tailored for the needs of the medical community. We are currently engaged in the development and testing of hardware and software for a fairly high-performance image processing computer system based on a popular personal computer. In this paper, we describe the design and development of this system. Biological image processing computer systems have now reached a level of hardware and software refinement where they could become convenient image analysis tools for biologists. The development of a general purpose image processing system for quantitative image analysis that is inexpensive, flexible, and easy-to-use represents a significant step towards making the microscopic digital image processing techniques more widely applicable not only in a research environment as a biologist's workstation, but also in clinical environments as a diagnostic tool.

Exploiting mAb structure characteristics for a directed QbD implementation in early process development.

PubMed

Karlberg, Micael; von Stosch, Moritz; Glassey, Jarka

2018-03-07

In today's biopharmaceutical industries, the lead time to develop and produce a new monoclonal antibody takes years before it can be launched commercially. The reasons lie in the complexity of the monoclonal antibodies and the need for high product quality to ensure clinical safety which has a significant impact on the process development time. Frameworks such as quality by design are becoming widely used by the pharmaceutical industries as they introduce a systematic approach for building quality into the product. However, full implementation of quality by design has still not been achieved due to attrition mainly from limited risk assessment of product properties as well as the large number of process factors affecting product quality that needs to be investigated during the process development. This has introduced a need for better methods and tools that can be used for early risk assessment and predictions of critical product properties and process factors to enhance process development and reduce costs. In this review, we investigate how the quantitative structure-activity relationships framework can be applied to an existing process development framework such as quality by design in order to increase product understanding based on the protein structure of monoclonal antibodies. Compared to quality by design, where the effect of process parameters on the drug product are explored, quantitative structure-activity relationships gives a reversed perspective which investigates how the protein structure can affect the performance in different unit operations. This provides valuable information that can be used during the early process development of new drug products where limited process understanding is available. Thus, quantitative structure-activity relationships methodology is explored and explained in detail and we investigate the means of directly linking the structural properties of monoclonal antibodies to process data. The resulting information as a decision tool can help to enhance the risk assessment to better aid process development and thereby overcome some of the limitations and challenges present in QbD implementation today.

Materials, Processes and Manufacturing in Ares 1 Upper Stage: Integration with Systems Design and Development

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.

2008-01-01

Ares I Crew Launch Vehicle Upper Stage is designed and developed based on sound systems engineering principles. Systems Engineering starts with Concept of Operations and Mission requirements, which in turn determine the launch system architecture and its performance requirements. The Ares I-Upper Stage is designed and developed to meet these requirements. Designers depend on the support from materials, processes and manufacturing during the design, development and verification of subsystems and components. The requirements relative to reliability, safety, operability and availability are also dependent on materials availability, characterization, process maturation and vendor support. This paper discusses the roles and responsibilities of materials and manufacturing engineering during the various phases of Ares IUS development, including design and analysis, hardware development, test and verification. Emphasis is placed how materials, processes and manufacturing support is integrated over the Upper Stage Project, both horizontally and vertically. In addition, the paper describes the approach used to ensure compliance with materials, processes, and manufacturing requirements during the project cycle, with focus on hardware systems design and development.

How does Learning Impact Development in Infancy? The Case of Perceptual Organization

PubMed Central

Bhatt, Ramesh S.; Quinn, Paul C.

2011-01-01

Pattern perception and organization are critical functions of the visual cognition system. Many organizational processes are available early in life, such that infants as young 3 months of age are able to readily utilize a variety of cues to organize visual patterns. However, other processes are not readily evident in young infants, and their development involves perceptual learning. We describe a theoretical framework that addresses perceptual learning in infancy and the manner in which it affects visual organization and development. It identifies five kinds of experiences that induce learning, and suggests that they work via attentional and unitization mechanisms to modify visual organization. In addition, the framework proposes that this kind of learning is abstract, domain general, functional at different ages in a qualitatively similar manner, and has a long-term impact on development through a memory reactivation process. Although most models of development assume that experience is fundamental to development, very little is actually known about the process by which experience affects development. The proposed framework is an attempt to account for this process in the domain of perception. PMID:21572570

Government Open Systems Interconnection Profile (GOSIP) Transition Strategy

DTIC Science & Technology

1993-09-01

it explores some of the GOSIP protocol details and discusses the process by which standards organizations have developed their...version 1 and 2. Additionally, it explores some of the GOSIP protocol details and discusses the process by which standards organizations have developed ...ORGANIZATION OF STUDY 1. The Standards Process Chapter II describes the process whereby standards are developed and adopted by the ISO and how the

Chinese Scientific and Technical Information Institutions: Development and Perspective

ERIC Educational Resources Information Center

Yanning, Zheng

2011-01-01

The collection, storage, processing, and dissemination of scientific and technical information make an important basis for economic and social development as well as for scientific development. A nation has to develop the right mechanisms and modalities to collect, store, process, and disseminate scientific and technical information tailored to…

Organizational Development: Values, Process, and Technology.

ERIC Educational Resources Information Center

Margulies, Newton; Raia, Anthony P.

The current state-of-the-art of organizational development is the focus of this book. The five parts into which the book is divided are as follows: Part One--Introduction (Organizational Development in Perspective--the nature, values, process, and technology of organizational development); Part Two--The Components of Organizational Developments…

Guide Book for Curriculum Development and Adaptation. Draft.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

This guide was developed as a cooperative initiative by UNESCO member countries to provide information about the process of development and adaptation of a flexible, competency-based curriculum, especially in vocational education. The guidebook outlines an exemplar process of education organized in 11 stages of design and development based on…

Cognitive Processes and Theory Development: A Reply to Spencer and Karmiloff-Smith.

ERIC Educational Resources Information Center

Gellatly, Angus

1997-01-01

Focuses on the role of enculturation in children's cognitive development by distinguishing between, and elaborating upon, three factors: (1) cultural context; (2) cognitive contents; and (3) cognitive processes. Suggests problems inherent in positing homologies between children's cognitive development and the historical development of scientific…

Developing and Implementing a Process for the Review of Nonacademic Units.

ERIC Educational Resources Information Center

Brown, Marilyn K.

1989-01-01

A major research university's recently developed process for systematic evaluation of nonacademic units is described, and the steps in its development and implementation are outlined: review of literature on organizational effectiveness; survey of peer institutions; development of guidelines for review; and implementation in several campus units.…

Serious Gaming in Medical Education: A Proposed Structured Framework for Game Development.

PubMed

Olszewski, Aleksandra E; Wolbrink, Traci A

2017-08-01

Serious games are increasingly being used for medical education. However, the design and development of serious games for the education of health professionals is highly variable, and very few articles report the development process used for game development. There are many established processes for software development that can improve and streamline development, and incorporating the best practices from educational pedagogy and software development may enhance teamwork and communication, decrease development costs, and improve the quality of serious games. In this article, we review and summarize the literature for serious game development for medical education, and combining the best practices, we propose a structured three-phase iterative development framework for serious game development.

Bockron as a Medium of Learning in The Process of Inquiry based Learning to Improve Science Process Skills of Junior High School Students in Growth and Development Concept

NASA Astrophysics Data System (ADS)

Mayasari, D.

2017-02-01

Investigative research on Influence of bockron as a medium of learning in process of inquiry-based learning to the development of science process skills on the concept of growth and development. This research was done in an effort to follow up underdeveloped skills of observing, communicating andconclude on students. This research was conducted using classroom action research (PTK), which consisted of 3 cycles. Cycle 1 students observe differences in growth and development, cycle 2 students measure the growth rate, cycle 3 students observe factors that influence growth and development, In these three cycles is used as a planting medium bocron (bottles and dacron). It involves 8th grade junior high-school students of 14-15 years old as research subjects in six meetings. Indicators of process skill include observation, communication, interpretation and inference. Data is collected through students’ work sheets, written tests and observation. Processing of the data to see N-Gain used Microsoft Excel 2007, and the results showed that an increase in science process skills with a value of medium N-Gain (0,63). Bokron learning medium easily and cheaply obtainable around the students, particularly those in urban areas is quite difficult to get land to be used as aplanting medium. In addition to observation of growth and development, bokron media can also be used to observe the motion in plants. The use bokron as a learning medium can train and develop science process skills, attitude and scientific method also gives students concrete experience of the process of growth and development in plants.

Matthew Oliver | NREL

Science.gov Websites

Process Development Unit. NREL's Thermal and Catalytic Process Development Unit can process 1/2 ton per biomass to fuels and chemicals Affiliated Research Programs Thermochemical Process Integration, Scale-Up

Life-Span Learning: A Developmental Perspective

ERIC Educational Resources Information Center

Thornton, James E.

2003-01-01

The article discusses learning as embedded processes of development and aging, and as social activity over the life course. The concept of life-span learning is proposed and outlined to discuss these processes as aspects of and propositions in life-span development and aging theory. Life-span learning processes arise and continuously develop in a…

42 CFR 137.295 - May Self-Governance Tribes elect to develop their own environmental review process?

Code of Federal Regulations, 2011 CFR

2011-10-01

... own environmental review process? Yes, Self-Governance Tribes may develop their own environmental... 42 Public Health 1 2011-10-01 2011-10-01 false May Self-Governance Tribes elect to develop their own environmental review process? 137.295 Section 137.295 Public Health PUBLIC HEALTH SERVICE...

75 FR 41452 - Withdrawal of the Environmental Impact Statement (EIS) Development Process for the Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers Withdrawal of the Environmental Impact Statement (EIS) Development Process for the Proposed Beluga to Fairbanks (B2F) Natural Gas... discontinuing the EIS development process associated with the proposed B2F pipeline. FOR FURTHER INFORMATION...

78 FR 23550 - Department of Energy's (DOE) Participation in Development of the International Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

...: Notice. SUMMARY: The DOE participates in the code development process of the International Code Council... notice outlines the process by which DOE produces code change proposals, and participates in the ICC code development process. FOR FURTHER INFORMATION CONTACT: Jeremiah Williams, U.S. Department of Energy, Office of...

This Is How We Do It: A Glimpse at Gamelab's Design Process

ERIC Educational Resources Information Center

Daer, Alice J.

2010-01-01

This article explicates the ways that developers working at an independent game company in New York City organized their development process around a deep concern for how players make meaning from their games. Two designers' descriptions of their processes are used to illustrate the company's commitment to developing games that invite…

Sensori-Motor Experience Leads to Changes in Visual Processing in the Developing Brain

ERIC Educational Resources Information Center

James, Karin Harman

2010-01-01

Since Broca's studies on language processing, cortical functional specialization has been considered to be integral to efficient neural processing. A fundamental question in cognitive neuroscience concerns the type of learning that is required for functional specialization to develop. To address this issue with respect to the development of neural…

The Development of Reading for Comprehension: An Information Processing Analysis. Final Report.

ERIC Educational Resources Information Center

Schadler, Margaret; Juola, James F.

This report summarizes research performed at the Universtiy of Kansas that involved several topics related to reading and learning to read, including the development of automatic word recognition processes, reading for comprehension, and the development of new computer technologies designed to facilitate the reading process. The first section…

Domain Modeling and Application Development of an Archetype- and XML-based EHRS. Practical Experiences and Lessons Learnt.

PubMed

Kropf, Stefan; Chalopin, Claire; Lindner, Dirk; Denecke, Kerstin

2017-06-28

Access to patient data within the hospital or between hospitals is still problematic since a variety of information systems is in use applying different vendor specific terminologies and underlying knowledge models. Beyond, the development of electronic health record systems (EHRSs) is time and resource consuming. Thus, there is a substantial need for a development strategy of standardized EHRSs. We are applying a reuse-oriented process model and demonstrate its feasibility and realization on a practical medical use case, which is an EHRS holding all relevant data arising in the context of treatment of tumors of the sella region. In this paper, we describe the development process and our practical experiences. Requirements towards the development of the EHRS were collected by interviews with a neurosurgeon and patient data analysis. For modelling of patient data, we selected openEHR as standard and exploited the software tools provided by the openEHR foundation. The patient information model forms the core of the development process, which comprises the EHR generation and the implementation of an EHRS architecture. Moreover, a reuse-oriented process model from the business domain was adapted to the development of the EHRS. The reuse-oriented process model is a model for a suitable abstraction of both, modeling and development of an EHR centralized EHRS. The information modeling process resulted in 18 archetypes that were aggregated in a template and built the boilerplate of the model driven development. The EHRs and the EHRS were developed by openEHR and W3C standards, tightly supported by well-established XML techniques. The GUI of the final EHRS integrates and visualizes information from various examinations, medical reports, findings and laboratory test results. We conclude that the development of a standardized overarching EHR and an EHRS is feasible using openEHR and W3C standards, enabling a high degree of semantic interoperability. The standardized representation visualizes data and can in this way support the decision process of clinicians.

A ten-step process to develop case management plans.

PubMed

Tahan, Hussein A

2002-01-01

The use of case management plans has contained cost and improved quality of care successfully. However, the process of developing these plans remains a great challenge for healthcare executives, in this article, the author presents the answer to this challenge by discussing a 10-step formal process that administrators of patient care services and case managers can adapt to their institutions. It also can be used by interdisciplinary team members as a practical guide to develop a specific case management plan. This process is applicable to any care setting (acute, ambulatory, long term, and home care), diagnosis, or procedure. It is particularly important for those organizations that currently do not have a deliberate and systematic process to develop case management plans and are struggling with how to improve the efficiency and productivity of interdisciplinary teams charged with developing case management plans.

Organizational management practices for achieving software process improvement

NASA Technical Reports Server (NTRS)

Kandt, Ronald Kirk

2004-01-01

The crisis in developing software has been known for over thirty years. Problems that existed in developing software in the early days of computing still exist today. These problems include the delivery of low-quality products, actual development costs that exceed expected development costs, and actual development time that exceeds expected development time. Several solutions have been offered to overcome out inability to deliver high-quality software, on-time and within budget. One of these solutions involves software process improvement. However, such efforts often fail because of organizational management issues. This paper discusses business practices that organizations should follow to improve their chances of initiating and sustaining successful software process improvement efforts.

Software-Engineering Process Simulation (SEPS) model

NASA Technical Reports Server (NTRS)

Lin, C. Y.; Abdel-Hamid, T.; Sherif, J. S.

1992-01-01

The Software Engineering Process Simulation (SEPS) model is described which was developed at JPL. SEPS is a dynamic simulation model of the software project development process. It uses the feedback principles of system dynamics to simulate the dynamic interactions among various software life cycle development activities and management decision making processes. The model is designed to be a planning tool to examine tradeoffs of cost, schedule, and functionality, and to test the implications of different managerial policies on a project's outcome. Furthermore, SEPS will enable software managers to gain a better understanding of the dynamics of software project development and perform postmodern assessments.

A Decision Tool that Combines Discrete Event Software Process Models with System Dynamics Pieces for Software Development Cost Estimation and Analysis

NASA Technical Reports Server (NTRS)

Mizell, Carolyn Barrett; Malone, Linda

2007-01-01

The development process for a large software development project is very complex and dependent on many variables that are dynamic and interrelated. Factors such as size, productivity and defect injection rates will have substantial impact on the project in terms of cost and schedule. These factors can be affected by the intricacies of the process itself as well as human behavior because the process is very labor intensive. The complex nature of the development process can be investigated with software development process models that utilize discrete event simulation to analyze the effects of process changes. The organizational environment and its effects on the workforce can be analyzed with system dynamics that utilizes continuous simulation. Each has unique strengths and the benefits of both types can be exploited by combining a system dynamics model and a discrete event process model. This paper will demonstrate how the two types of models can be combined to investigate the impacts of human resource interactions on productivity and ultimately on cost and schedule.

Emerging freeze-drying process development and scale-up issues.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2011-03-01

Although several guidelines do exist for freeze-drying process development and scale-up, there are still a number of issues that require additional attention. The objective of this review article is to discuss some emerging process development and scale-up issue with emphasis on effect of load condition and freeze-drying in novel container systems such as syringes, Lyoguard trays, ampoules, and 96-well plates. Understanding the heat and mass transfer under different load conditions and for freeze-drying in these novel container systems will help in developing a robust freeze-drying process which is also easier to scale-up. Further research and development needs in these emerging areas have also been addressed. © 2011 American Association of Pharmaceutical Scientists

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

1992-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

Developing Mathematical Processes (DMP). Field Test Evaluation, 1973-1974.

ERIC Educational Resources Information Center

Schall, William; And Others

The Developing Mathematical Processes (DMP) program was field-tested in the kindergarten and first three grades of one parochial and five public schools. DMP is an activity-based program developed around a comprehensive list of behavioral objectives. The program is concerned with the development of intuitive geometric concepts as well as…

Validating a Measure of Stages of Change in Career Development

ERIC Educational Resources Information Center

Hammond, Marie S.; Michael, Tony; Luke, Charles

2017-01-01

Research on the processes of change in career development has focused on developmental stages rather than processes. This manuscript reports on the development and validation of the stages of change-career development scale, adapted from McConnaughy, Prochaska, & Velicer (1983) measure of stages of change in psychotherapy. Data from 875…

A Neuroconstructivist Model of Past Tense Development and Processing

ERIC Educational Resources Information Center

Westermann, Gert; Ruh, Nicolas

2012-01-01

We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated…

Developing Automated Feedback Materials for a Training Simulator: An Interaction between Users and Researchers.

ERIC Educational Resources Information Center

Shlechter, Theodore M.; And Others

This paper focuses upon the research and development (R&D) process associated with developing automated feedback materials for the SIMulation NETworking (SIMNET) training system. This R&D process involved a partnership among instructional developers, practitioners, and researchers. Users' input has been utilized to help: (1) design the…

A Conceptual Model for Developing Mindsets for Strategic Insight under Conditions of Complexity and High Uncertainty

ERIC Educational Resources Information Center

Yorks, Lyle; Nicolaides, Aliki

2012-01-01

This article addresses an important, yet often underattended to, aspect of the strategy development process: fostering the use of strategic learning practices in the simultaneous practice of developing strategy and cultivating strategic mindset awareness. The need for addressing this aspect of the strategy development process is increasingly…

Annotation: Development of Facial Expression Recognition from Childhood to Adolescence--Behavioural and Neurological Perspectives

ERIC Educational Resources Information Center

Herba, Catherine; Phillips, Mary

2004-01-01

Background: Intact emotion processing is critical for normal emotional development. Recent advances in neuroimaging have facilitated the examination of brain development, and have allowed for the exploration of the relationships between the development of emotion processing abilities, and that of associated neural systems. Methods: A literature…

Development and History of the Concept of PPB.

ERIC Educational Resources Information Center

Keller, Harry

Program budgeting is an extension and refinement of budgeting processes developed during the last half century. The purpose of this paper is to investigate the theory, philosophy, and techniques of this new process, and to develop a conceptual framework for its use. An account of the historical development of Planning Programming Budgeting Systems…

The Family's Influence on Adolescent and Young Adult Career Development: Theory, Research and Practice.

ERIC Educational Resources Information Center

Hughes, Cathy; Thomas, Trang

2003-01-01

A research review identified a range of family process variables associated with enhanced career development for adolescents and young adults. Findings were consistent with the theories of Roe (personality development and career choice) and Super (life-span, life-space) regarding the influence of family processes on career development. (Contains…

The Investigation of Teachers' Metaphoric Perceptions about Professional Development

ERIC Educational Resources Information Center

Yurtseven, Nihal

2017-01-01

Professional development is an ongoing process in which teachers review their teaching practices and learn how to respond to their students' needs. To make the professional development process more effective, we need to define the identity of a teacher correctly and clarify the perspective about teachers' professional development. The purpose of…

Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

NASA Technical Reports Server (NTRS)

Basile, Lisa R.; Kelly, Angelita C.

1987-01-01

The Spacelab Data Processing Facility (SLDPF) is an integral part of the Space Shuttle data network for missions that involve attached scientific payloads. Expert system prototypes were developed to aid in the performance of the quality assurance function of the Spacelab and/or Attached Shuttle Payloads processed telemetry data. The Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS), two expert systems, were developed to determine their feasibility and potential in the quality assurance of processed telemetry data. The capabilities and performance of these systems are discussed.

Development and demonstration of manufacturing processes for fabricating graphite/LARC-160 polyimide structural elements, part 4, paragraph B

NASA Technical Reports Server (NTRS)

1980-01-01

A quality assurance program was developed which included specifications for celion/LARC-160 polyimide materials and quality control of materials and processes. The effects of monomers and/or polymer variables and prepeg variables on the processibility of celion/LARC prepeg were included. Processes for fabricating laminates, honeycomb core panels, and chopped fiber moldings were developed. Specimens and conduct tests were fabricated to qualify the processes for fabrication of demonstration components.

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

PubMed

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

Optimization of Primary Drying in Lyophilization during Early Phase Drug Development using a Definitive Screening Design with Formulation and Process Factors.

PubMed

Goldman, Johnathan M; More, Haresh T; Yee, Olga; Borgeson, Elizabeth; Remy, Brenda; Rowe, Jasmine; Sadineni, Vikram

2018-06-08

Development of optimal drug product lyophilization cycles is typically accomplished via multiple engineering runs to determine appropriate process parameters. These runs require significant time and product investments, which are especially costly during early phase development when the drug product formulation and lyophilization process are often defined simultaneously. Even small changes in the formulation may require a new set of engineering runs to define lyophilization process parameters. In order to overcome these development difficulties, an eight factor definitive screening design (DSD), including both formulation and process parameters, was executed on a fully human monoclonal antibody (mAb) drug product. The DSD enables evaluation of several interdependent factors to define critical parameters that affect primary drying time and product temperature. From these parameters, a lyophilization development model is defined where near optimal process parameters can be derived for many different drug product formulations. This concept is demonstrated on a mAb drug product where statistically predicted cycle responses agree well with those measured experimentally. This design of experiments (DoE) approach for early phase lyophilization cycle development offers a workflow that significantly decreases the development time of clinically and potentially commercially viable lyophilization cycles for a platform formulation that still has variable range of compositions. Copyright © 2018. Published by Elsevier Inc.

The Effects of Radiation Chemistry on Solvent Extraction: 1. Conditions in Acidic Solution and a Review of TBP Radiolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce J. Mincher; Guiseppe Modolo; Strephen P. Mezyk

2009-01-01

Solvent extraction is the most commonly used process scale separation technique for nuclear applications and it benefits from more than 60 years of research and development and proven experience at the industrial scale. Advanced solvent extraction processes for the separation of actinides and fission products from dissolved nuclear fuel are now being investigated worldwide by numerous groups (US, Europe, Russia, Japan etc.) in order to decrease the radiotoxic inventories of nuclear waste. While none of the advanced processes have yet been implemented at the industrial scale their development studies have sometimes reached demonstration tests at the laboratory scale. Most ofmore » the partitioning strategies rely on the following four separations: 1. Partitioning of uranium and/or plutonium from spent fuel dissolution liquors. 2. Separation of the heat generating fission products such as strontium and cesium. 3. Coextraction of the trivalent actinides and lanthanides. 4. Separation of the trivalent actinides from the trivalent lanthanides. Tributylphosphate (TBP) in the first separation is the basis of the PUREX, UREX and COEX processes, developed in Europe and the US, whereas monoamides as alternatives for TBP are being developed in Japan and India. For the second separation, many processes were developed worldwide, including the use of crown-ether extractants, like the FPEX process developed in the USA, and the CCD-PEG process jointly developed in the USA and Russia for the partitioning of cesium and strontium. In the third separation, phosphine oxides (CMPOs), malonamides, and diglycolamides are used in the TRUEX, DIAMEX and the ARTIST processes, respectively developed in US, Europe and Japan. Trialkylphosphine oxide(TRPO) developed in China, or UNEX (a mixture of several extractants) jointly developed in Russia and the USA allow all actinides to be co-extracted from acidic radioactive liquid waste. For the final separation, soft donor atom-containing ligands such as the bistriazinylbipyridines (BTBPs) or dithiophosphinic acids have been developed in Europe and China to selectively extract the trivalent actinides. However, in the TALSPEAK process developed in the USA, the separation is based on the relatively high affinity of aminopolycarboxylic acid complexants such as DTPA for trivalent actinides over lanthanides. In the DIDPA, SETFICS and the GANEX processes, developed in Japan and France, the group separation is accomplished in a reverse TALSPEAK process. A typical scenario is shown in Figure 1 for the UREX1a (Uranium Extraction version 1a) process. The initial step is the TBP extraction for the separation of recyclable uranium. The second step partitions the short-lived, highly radioactive cesium and strontium to minimize heat loading in the high-level waste repository. The third step is a group separation of the trivalent actinides and lanthanides with the last step being partitioning of the trivalent lanthanides from the actinides.« less

76 FR 81906 - Advance Notice of Proposed Rulemaking Regarding a Competitive Process for Leasing Public Lands...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... Solar and Wind Energy Development AGENCY: Bureau of Land Management. ACTION: Advance notice of proposed... to establish a competitive process for leasing public lands for solar and wind energy development... process for issuing Right-of-Way (ROW) leases for solar and wind energy development that is based upon the...

The Community Development Process: The Rediscovery of Local Initiative.

ERIC Educational Resources Information Center

Biddle, William W.; Biddle, Loureide J.

The development process in two communities, a mining county in rural Appalachia and a deteriorating neighborhood in a northern industrial city, is presented in case-study form. Concepts and commonly used terms are defined; a process of development is identified that can be used in groups small enough to permit attention to the growth of persons.…

Concept Development in Learning Physics: The Case of Electric Current and Voltage Revisited

ERIC Educational Resources Information Center

Koponen, Ismo T.; Huttunen, Laura

2013-01-01

In learning conceptual knowledge in physics, a common problem is the development and differentiation of concepts in the learning process. An important part of this development process is the re-organisation or re-structuring process in which students' conceptual knowledge and concepts change. This study proposes a new view of concept…

REPORT ON TWO PROCESS EQUIPMENT CHANGES FOR FEDERAL PAINTING FACILITIES

EPA Science Inventory

EPA's National Risk Management Research Laboratory (NRMRL) has actively participated in the Strategic Environmental Research and Development Program (SERDP) to develop innovative technologies and processes for the reduction of environmental pollution. Technology developments fro...

Development of numerical processing in children with typical and dyscalculic arithmetic skills—a longitudinal study

PubMed Central

Landerl, Karin

2013-01-01

Numerical processing has been demonstrated to be closely associated with arithmetic skills, however, our knowledge on the development of the relevant cognitive mechanisms is limited. The present longitudinal study investigated the developmental trajectories of numerical processing in 42 children with age-adequate arithmetic development and 41 children with dyscalculia over a 2-year period from beginning of Grade 2, when children were 7; 6 years old, to beginning of Grade 4. A battery of numerical processing tasks (dot enumeration, non-symbolic and symbolic comparison of one- and two-digit numbers, physical comparison, number line estimation) was given five times during the study (beginning and middle of each school year). Efficiency of numerical processing was a very good indicator of development in numerical processing while within-task effects remained largely constant and showed low long-term stability before middle of Grade 3. Children with dyscalculia showed less efficient numerical processing reflected in specifically prolonged response times. Importantly, they showed consistently larger slopes for dot enumeration in the subitizing range, an untypically large compatibility effect when processing two-digit numbers, and they were consistently less accurate in placing numbers on a number line. Thus, we were able to identify parameters that can be used in future research to characterize numerical processing in typical and dyscalculic development. These parameters can also be helpful for identification of children who struggle in their numerical development. PMID:23898310

On the Development of a Computing Infrastructure that Facilitates IPPD from a Decision-Based Design Perspective

NASA Technical Reports Server (NTRS)

Hale, Mark A.; Craig, James I.; Mistree, Farrokh; Schrage, Daniel P.

1995-01-01

Integrated Product and Process Development (IPPD) embodies the simultaneous application of both system and quality engineering methods throughout an iterative design process. The use of IPPD results in the time-conscious, cost-saving development of engineering systems. Georgia Tech has proposed the development of an Integrated Design Engineering Simulator that will merge Integrated Product and Process Development with interdisciplinary analysis techniques and state-of-the-art computational technologies. To implement IPPD, a Decision-Based Design perspective is encapsulated in an approach that focuses on the role of the human designer in product development. The approach has two parts and is outlined in this paper. First, an architecture, called DREAMS, is being developed that facilitates design from a decision-based perspective. Second, a supporting computing infrastructure, called IMAGE, is being designed. The current status of development is given and future directions are outlined.

Investigation of charge coupled device correlation techniques

NASA Technical Reports Server (NTRS)

Lampe, D. R.; Lin, H. C.; Shutt, T. J.

1978-01-01

Analog Charge Transfer Devices (CTD's) offer unique advantages to signal processing systems, which often have large development costs, making it desirable to define those devices which can be developed for general system's use. Such devices are best identified and developed early to give system's designers some interchangeable subsystem blocks, not requiring additional individual development for each new signal processing system. The objective of this work is to describe a discrete analog signal processing device with a reasonably broad system use and to implement its design, fabrication, and testing.

Data Processing and First Products from the Hyperspectral Imager for the Coastal Ocean (HICO) on the International Space Station

DTIC Science & Technology

2010-04-01

NRL Stennis Space Center (NRL-SSC) for further processing using the NRL SSC Automated Processing System (APS). APS was developed for processing...have not previously developed automated processing for 73 hyperspectral ocean color data. The hyperspectral processing branch includes several

Factors associated with staff development processes and the creation of innovative science courses in higher education

NASA Astrophysics Data System (ADS)

Hodges, Jeanelle Bland

1999-11-01

The purpose of the study was to determine factors associated with staff development processes and the creation of innovative science courses by higher education faculty who have participated in a model staff development project. The staff development program was designed for college faculty interested in creating interdisciplinary, constructivist-based science, mathematics, or engineering courses designed for non-majors. The program includes workshops on incorporating constructivist pedagogy, alternative assessment, and technology into interdisciplinary courses. Staff development interventions used in the program include grant opportunities, distribution of resource materials, and peer mentoring. University teams attending the workshops are comprised of faculty from the sciences, mathematics, or engineering, as well as education, and administration. A purposeful and convenient sample of three university teams were subjects for this qualitative study. Each team had attended a NASA Opportunities for Visionary Academics (NOVA) workshop, received funding for course development, and offered innovative courses. Five questions were addressed in this study: (a) What methods were used by faculty teams in planning the courses? (b) What changes occurred in existing science courses? (c) What factors affected the team collaboration process? (d) What personal characteristics of faculty members were important in successful course development? and (e) What barriers existed for faculty in the course development process? Data was collected at each site through individual faculty interviews (N = 11), student focus group interviews (N = 15), and classroom observations. Secondary data included original funding proposals. The NOVA staff development model incorporated effective K--12 interventions with higher education interventions. Analysis of data revealed that there were four factors of staff development processes that were most beneficial. First, the team collaborative processes were crucial in successful course development. Second, the use of instructional grants to fund course development gave credibility to the faculty involved in course development. Third, the faculty members taking the lead in creating teams actively sought out faculty members in the sciences who had previous experience teaching at the K--12 level or in informal education. In addition, college environments were found to have an impact on the success of the innovative course development projects.

System Engineering Processes at Kennedy Space Center for Development of the SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric J.

2012-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems developed at the Kennedy Space Center Engineering Directorate follow a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Paper describes this process and gives an example of where the process has been applied.

Development of a data acquisition system using a RISC/UNIX TM workstation

NASA Astrophysics Data System (ADS)

Takeuchi, Y.; Tanimori, T.; Yasu, Y.

1993-05-01

We have developed a compact data acquisition system on RISC/UNIX workstations. A SUN TM SPARCstation TM IPC was used, in which an extension bus "SBus TM" was linked to a VMEbus. The transfer rate achieved was better than 7 Mbyte/s between the VMEbus and the SUN. A device driver for CAMAC was developed in order to realize an interruptive feature in UNIX. In addition, list processing has been incorporated in order to keep the high priority of the data handling process in UNIX. The successful developments of both device driver and list processing have made it possible to realize the good real-time feature on the RISC/UNIX system. Based on this architecture, a portable and versatile data taking system has been developed, which consists of a graphical user interface, I/O handler, user analysis process, process manager and a CAMAC device driver.

Scale-up of mild gasification to be a process development unit mildgas 24 ton/day PDU design report. Final report, November 1991--July 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

From November 1991 to April 1996, Kerr McGee Coal Corporation (K-M Coal) led a project to develop the Institute of Gas Technology (IGT) Mild Gasification (MILDGAS) process for near-term commercialization. The specific objectives of the program were to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for further design scale-up; obtain large batches of coal-derived co-products for industrial evaluation; prepare a detailed design of a demonstration unit; and develop technical and economic plans for commercialization of the MILDGAS process. The project team for the PDU development program consisted of: K-M Coal,more » IGT, Bechtel Corporation, Southern Illinois University at Carbondale (SIUC), General Motors (GM), Pellet Technology Corporation (PTC), LTV Steel, Armco Steel, Reilly Industries, and Auto Research.« less

The Building Wellness project: a case history of partnership, power sharing, and compromise.

PubMed

Jones, Drew; Franklin, Charla; Butler, Brittany T; Williams, Pluscedia; Wells, Kenneth B; Rodríguez, Michael A

2006-01-01

The Institute of Medicine has recommended development of community-focused strategies to alleviate the disproportionate burden of illness on minorities, including depression. So far, limited data exist on the process of developing such partnerships within diverse racial/ethnic environments as they strive to develop community-driven, evidence-based action plans to improve the quality of outreach services. We describe such an effort around depression in south Los Angeles and explore the issues of the process in the hopes of informing future partnership development. Community meetings, presentations, feedback, discussion groups, and consensus-based action items were implemented over an 18-month period. A writing subcommittee was designated to develop a description of the group's work and process, as well as the diverse perspectives in the partnership. Data sources included meeting minutes, materials for members and community feedback presentations, scribe notes, and the reflections of the authors. Development was seen on the formal group level, in the process, and on the realization of three categories of action plans. Designed to assist social service caseworkers in the recognition of and referral for depression, the action plans included developing a website, a tool kit (modified Delphi process), and a one-page depression "fact sheet" with region-specific referrals. Through the process of developing a means to combat depression in a racially/ ethnically diverse population, the community is not only better informed about depression but has become a true partner with the academic element in adapting these programs for local service providers, resulting in improved understanding of the partnership process.

Children's episodic memory.

PubMed

Ghetti, Simona; Lee, Joshua

2011-07-01

Episodic memory develops during childhood and adolescence. This trajectory depends on several underlying processes. In this article, we first discuss the development of the basic binding processes (e.g., the processes by which elements are bound together to form a memory episode) and control processes (e.g., reasoning and metamemory processes) involved in episodic remembering. Then, we discuss the role of these processes in false-memory formation. In the subsequent sections, we examine the neural substrates of the development of episodic memory. Finally, we discuss atypical development of episodic memory. As we proceed through the article, we suggest potential avenues for future research. WIREs Cogni Sci 2011 2 365-373 DOI: 10.1002/wcs.114 For further resources related to this article, please visit the WIREs website. Copyright © 2010 John Wiley & Sons, Ltd.

Development and evaluation of low cost honey heating-cum-filtration system.

PubMed

Alam, Md Shafiq; Sharma, D K; Sehgal, V K; Arora, M; Bhatia, S

2014-11-01

A fully mechanized honey heating-cum-filtration system was designed, developed, fabricated and evaluated for its performance. The system comprised of two sections; the top heating section and the lower filtering section. The developed system was evaluated for its performance at different process conditions (25 kg and 50 kg capacity using processing condition: 50 °C heating temperature and 60 °C heating temperature with 20 and 40 min holding time, respectively) and it was found that the total time required for heating, holding and filtration of honey was 108 and 142 min for 25 kg and 50 kg capacity of machine, respectively, irrespective of the processing conditions. The optimum capacity of the system was found to be 50 kg and it involved an investment of Rs 40,000 for its fabrication. The honey filtered through the developed filtration system was compared with the honey filtered in a high cost honey processing plant and raw honey for its microbial and biochemical (reducing sugars (%), moisture, acidity and pH) quality attributes. It was observed that the process of filtering through the developed unit resulted in reduction of microbes. The microbiological quality of honey filtered through the developed filtration system was better than that of raw honey and commercially processed honey. The treatment conditions found best in context of microbiological counts were 60 °C temperature for 20 min. There was 1.97 fold reductions in the plate count and 2.14 reductions in the fungal count of honey processed through the developed filtration system as compared to the raw honey. No coliforms were found in the processed honey. Honey processed through developed unit witnessed less moisture content, acidity and more reducing sugars as compared to raw honey, whereas its quality was comparable to the commercially processed honey.

Application of process mapping to understand integration of high risk medicine care bundles within community pharmacy practice.

PubMed

Weir, Natalie M; Newham, Rosemary; Corcoran, Emma D; Ali Atallah Al-Gethami, Ashwag; Mohammed Abd Alridha, Ali; Bowie, Paul; Watson, Anne; Bennie, Marion

2017-11-21

The Scottish Patient Safety Programme - Pharmacy in Primary Care collaborative is a quality improvement initiative adopting the Institute of Healthcare Improvement Breakthrough Series collaborative approach. The programme developed and piloted High Risk Medicine (HRM) Care Bundles (CB), focused on warfarin and non-steroidal anti-inflammatories (NSAIDs), within 27 community pharmacies over 4 NHS Regions. Each CB involves clinical assessment and patient education, although the CB content varies between regions. To support national implementation, this study aims to understand how the pilot pharmacies integrated the HRM CBs into routine practice to inform the development of a generic HRM CB process map. Regional process maps were developed in 4 pharmacies through simulation of the CB process, staff interviews and documentation of resources. Commonalities were collated to develop a process map for each HRM, which were used to explore variation at a national event. A single, generic process map was developed which underwent validation by case study testing. The findings allowed development of a generic process map applicable to warfarin and NSAID CB implementation. Five steps were identified as required for successful CB delivery: patient identification; clinical assessment; pharmacy CB prompt; CB delivery; and documentation. The generic HRM CB process map encompasses the staff and patients' journey and the CB's integration into routine community pharmacy practice. Pharmacist involvement was required only for clinical assessment, indicating suitability for whole-team involvement. Understanding CB integration into routine practice has positive implications for successful implementation. The generic process map can be used to develop targeted resources, and/or be disseminated to facilitate CB delivery and foster whole team involvement. Similar methods could be utilised within other settings, to allow those developing novel services to distil the key processes and consider their integration within routine workflows to effect maximal, efficient implementation and benefit to patient care. Copyright © 2017 Elsevier Inc. All rights reserved.

Review of operations in the Virginia Department of Transportation's project development process.

DOT National Transportation Integrated Search

2007-01-01

The Virginia Department of Transportation's (VDOT's) project development process (PDP) directs how construction projects are developed. The purpose of this study was to evaluate the manner in which operations is currently considered throughout the PD...

77 FR 66638 - The Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-06

... analyses and the development of other elements of the standard; developing a written action plan for..., revalidating and retaining the process hazard analysis; developing and implementing written operating [[Page 66639

High-power ultrasonic processing: Recent developments and prospective advances

NASA Astrophysics Data System (ADS)

Gallego-Juarez, Juan A.

2010-01-01

Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at industrial level. However, during the last ten years the interest in ultrasonic processing has revived particularly in industrial sectors where the ultrasonic technology may represent a clean and efficient tool to improve classical existing processes or an innovation alternative for the development of new processes. Such seems to be the case of relevant sectors such as food industry, environment, pharmaceuticals and chemicals manufacture, machinery, mining, etc where power ultrasound is becoming an emerging technology for process development. The possible major problem in the application of high-intensity ultrasound on industrial processing is the design and development of efficient power ultrasonic systems (generators and reactors) capable of large scale successful operation specifically adapted to each individual process. In the area of ultrasonic processing in fluid media and more specifically in gases, the development of the steppedplate transducers and other power ge with extensive radiating surface has strongly contributed to the implementation at semi-industrial and industrial stage of several commercial applications, in sectors such as food and beverage industry (defoaming, drying, extraction, etc), environment (air cleaning, sludge filtration, etc...), machinery and process for manufacturing (textile washing, paint manufacture, etc). The development of different cavitational reactors for liquid treatment in continuous flow is helping to introduce into industry the wide potential of the area of sonochemistry. Processes such as water and effluent treatment, crystallization, soil remediation, etc have been already implemented at semi-industrial and/or industrial stage. Other single advances in sectors like mining or energy have also to be mentioned. The objective of this paper is to review some recent developments in ultrasonic processing to show the present situation and the prospective progresses of high-power ultrasonics as an innovative technology in many industrial sectors.

High-throughput process development: I. Process chromatography.

PubMed

Rathore, Anurag S; Bhambure, Rahul

2014-01-01

Chromatographic separation serves as "a workhorse" for downstream process development and plays a key role in removal of product-related, host cell-related, and process-related impurities. Complex and poorly characterized raw materials and feed material, low feed concentration, product instability, and poor mechanistic understanding of the processes are some of the critical challenges that are faced during development of a chromatographic step. Traditional process development is performed as trial-and-error-based evaluation and often leads to a suboptimal process. High-throughput process development (HTPD) platform involves an integration of miniaturization, automation, and parallelization and provides a systematic approach for time- and resource-efficient chromatography process development. Creation of such platforms requires integration of mechanistic knowledge of the process with various statistical tools for data analysis. The relevance of such a platform is high in view of the constraints with respect to time and resources that the biopharma industry faces today. This protocol describes the steps involved in performing HTPD of process chromatography step. It described operation of a commercially available device (PreDictor™ plates from GE Healthcare). This device is available in 96-well format with 2 or 6 μL well size. We also discuss the challenges that one faces when performing such experiments as well as possible solutions to alleviate them. Besides describing the operation of the device, the protocol also presents an approach for statistical analysis of the data that is gathered from such a platform. A case study involving use of the protocol for examining ion-exchange chromatography of granulocyte colony-stimulating factor (GCSF), a therapeutic product, is briefly discussed. This is intended to demonstrate the usefulness of this protocol in generating data that is representative of the data obtained at the traditional lab scale. The agreement in the data is indeed very significant (regression coefficient 0.93). We think that this protocol will be of significant value to those involved in performing high-throughput process development of process chromatography.

Are We Doing Ok? Developing a Generic Process to Benchmark Career Services in Educational Institutions

ERIC Educational Resources Information Center

McCowan, Col; McKenzie, Malcolm

2011-01-01

In 2007 the Career Industry Council of Australia developed the Guiding Principles for Career Development Services and Career Information Products as one part of its strategy to produce a national quality framework for career development activities in Australia. An Australian university career service undertook an assessment process against these…

An Ethnographic Case Study of the Professional Development Model in a Successful Elementary School within a Suburban Southeast Texas School District

ERIC Educational Resources Information Center

Petrzelka, Valerie

2012-01-01

This ethnographic case study was designed to investigate a successful professional development model, perceived effective professional learning and process for determining professional development for teachers. With eighty years of research on professional development, limited research was available on the process for determining professional…

An Interpretation of Rudolf Steiner's Theory of Child Development and School Readiness.

ERIC Educational Resources Information Center

Ogletree, Earl J.

Viewing human development as a process by which the human gains self-control, this essay argues that locomotion and speech are control-oriented motor movements and suggests that cognition is also a form of movement developed as the individual achieves control over his or her thinking processes. Support for this view of cognitive development is…

Integration of utility and environmental activities in the project development process.

DOT National Transportation Integrated Search

2010-01-01

Two sources of delay during the project development process are utility adjustments and the environmental : review and clearance process. There are several efforts underway at the Texas Department of Transportation : (TxDOT) to optimize these process...

IMPROVING INDUSTRIAL WASTEWATER TREATMENT PROCESS RELIABILITY TO ENHANCE SUSTAINABLE DEVELOPMENT

EPA Science Inventory

Sustainable development includes the recovery of resources from industrial manufacturing processes. One valuable resource that can often be purified and reused is process wastewater. Typically, pollutants are removed from process wastewater using physical, chemical, and biologica...

The Impact of City-level Permitting Processes on Residential Photovoltaic Installation Prices and Development Times: An Empirical Analysis of Solar Systems in California Cities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiser, Ryan; Dong, Changgui

Business process or “soft” costs account for well over 50% of the installed price of residential photovoltaic (PV) systems in the United States, so understanding these costs is crucial for identifying PV cost-reduction opportunities. Among these costs are those imposed by city-level permitting processes, which may add both expense and time to the PV development process. Building on previous research, this study evaluates the effect of city-level permitting processes on the installed price of residential PV systems and on the time required to develop and install those systems. The study uses a unique dataset from the U.S. Department of Energy’smore » Rooftop Solar Challenge Program, which includes city-level permitting process “scores,” plus data from the California Solar Initiative and the U.S. Census. Econometric methods are used to quantify the price and development-time effects of city-level permitting processes on more than 3,000 PV installations across 44 California cities in 2011. Results indicate that city-level permitting processes have a substantial and statistically significant effect on average installation prices and project development times. The results suggest that cities with the most favorable (i.e., highest-scoring) permitting practices can reduce average residential PV prices by $0.27–$0.77/W (4%–12% of median PV prices in California) compared with cities with the most onerous (i.e., lowest-scoring) permitting practices, depending on the regression model used. Though the empirical models for development times are less robust, results suggest that the most streamlined permitting practices may shorten development times by around 24 days on average (25% of the median development time). These findings illustrate the potential price and development-time benefits of streamlining local permitting procedures for PV systems.« less

The Modular Modeling System (MMS): User's Manual

USGS Publications Warehouse

Leavesley, G.H.; Restrepo, Pedro J.; Markstrom, S.L.; Dixon, M.; Stannard, L.G.

1996-01-01

The Modular Modeling System (MMS) is an integrated system of computer software that has been developed to provide the research and operational framework needed to support development, testing, and evaluation of physical-process algorithms and to facilitate integration of user-selected sets of algorithms into operational physical-process models. MMS uses a module library that contains modules for simulating a variety of water, energy, and biogeochemical processes. A model is created by selectively coupling the most appropriate modules from the library to create a 'suitable' model for the desired application. Where existing modules do not provide appropriate process algorithms, new modules can be developed. The MMS user's manual provides installation instructions and a detailed discussion of system concepts, module development, and model development and application using the MMS graphical user interface.

Consolidated fuel reprocessing program

NASA Astrophysics Data System (ADS)

1985-02-01

Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

The jABC Approach to Rigorous Collaborative Development of SCM Applications

NASA Astrophysics Data System (ADS)

Hörmann, Martina; Margaria, Tiziana; Mender, Thomas; Nagel, Ralf; Steffen, Bernhard; Trinh, Hong

Our approach to the model-driven collaborative design of IKEA's P3 Delivery Management Process uses the jABC [9] for model driven mediation and choreography to complement a RUP-based (Rational Unified Process) development process. jABC is a framework for service development based on Lightweight Process Coordination. Users (product developers and system/software designers) easily develop services and applications by composing reusable building-blocks into (flow-) graph structures that can be animated, analyzed, simulated, verified, executed, and compiled. This way of handling the collaborative design of complex embedded systems has proven to be effective and adequate for the cooperation of non-programmers and non-technical people, which is the focus of this contribution, and it is now being rolled out in the operative practice.

Intelligent systems/software engineering methodology - A process to manage cost and risk

NASA Technical Reports Server (NTRS)

Friedlander, Carl; Lehrer, Nancy

1991-01-01

A systems development methodology is discussed that has been successfully applied to the construction of a number of intelligent systems. This methodology is a refinement of both evolutionary and spiral development methodologies. It is appropriate for development of intelligent systems. The application of advanced engineering methodology to the development of software products and intelligent systems is an important step toward supporting the transition of AI technology into aerospace applications. A description of the methodology and the process model from which it derives is given. Associated documents and tools are described which are used to manage the development process and record and report the emerging design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eshraghi, Ray

In September 2008, the U.S. Department of Energy and Martin County Economic Development Corporation entered into an agreement to further the advancement of a microtubular PEM fuel cell developed by Microcell Corporation. The overall focus of this project was on research and development related to high volume manufacturing of fuel cells and cost reduction in the fuel cell manufacturing process. The extrusion process used for the microfiber fuel cells in this project is inherently a low cost, high volume, high speed manufacturing process. In order to take advantage of the capabilities that the extrusion process provides, all subsequent manufacturing processesmore » must be enhanced to meet the extrusion line’s speed and output. Significant research and development was completed on these subsequent processes to ensure that power output and performance were not negatively impacted by the higher speeds, design changes and process improvements developed in this project. All tasks were successfully completed resulting in cost reductions, performance improvements and process enhancements in the areas of speed and quality. These results support the Department of Energy’s goal of fuel cell commercialization.« less

Methyl chloride via oxyhydrochlorination of methane: A building block for chemicals and fuels from natural gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benson, R.L.; Brown, S.S.D.; Ferguson, S.P.

1995-12-31

The objectives of this program are to (a) develop a process for converting natural gas to methyl chloride via an oxyhydrochlorination route using highly selective, stable catalysts in a fixed-bed, (b) design a reactor capable of removing the large amount of heat generated in the process so as to control the reaction, (c) develop a recovery system capable of removing the methyl chloride from the product stream and (d) determine the economics and commercial viability of the process. The general approach has been as follows: (a) design and build a laboratory scale reactor, (b) define and synthesize suitable OHC catalystsmore » for evaluation, (c) select first generation OHC catalyst for Process Development Unit (PDU) trials, (d) design, construct and startup PDU, (e) evaluate packed bed reactor design, (f) optimize process, in particular, product recovery operations, (g) determine economics of process, (h) complete preliminary engineering design for Phase II and (i) make scale-up decision and formulate business plan for Phase II. Conclusions regarding process development and catalyst development are presented.« less

A Qualitative Study of Latino Lesbian and Gay Youths' Experiences with Discrimination and the Career Development Process

ERIC Educational Resources Information Center

Adams, Eve M.; Cahill, Betsy J.; Ackerlind, Stacy J.

2005-01-01

Eight Latino lesbian and gay (LG) youth were interviewed for this descriptive qualitative study. The purpose of this study was to examine the Latino LG youth career development process and to increase our understanding of how multiple identities intersect with each other and the career development process. Six themes emerged: knowing you are…

European Science Notes Information Bulletin Reports on Current European and Middle Eastern Science

DTIC Science & Technology

1992-01-01

Overcash MATERIALS Research and Development in the Abbey-Polymer Processing and Properties ................... 574 J. Magill Corrosion and Protection Centre...gressi• ely pursuing the development of powerful "* Software Engineering and microprocessors and communication chips. The Information Processing ...differential equations, processing , Europe has a number of fascinating weather forecasting) that are to be developed by a projects in distributed

Rapid Development: A Content Analysis Comparison of Literature and Purposive Sampling of AFRL Rapid Reaction Projects

DTIC Science & Technology

2011-12-01

systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were...Stakeholder Requirements Definition, Architecture Design and Technical Planning. A purposive sampling of AFRL rapid development program managers and engineers...emphasize one process over another however Architecture Design , Implementation scored higher among Technical Processes. Decision Analysis, Technical

New Product Development (NPD) Process - An Example of Industrial Sector

NASA Astrophysics Data System (ADS)

Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

2017-12-01

This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

PVD thermal barrier coating applications and process development for aircraft engines

NASA Astrophysics Data System (ADS)

Rigney, D. V.; Viguie, R.; Wortman, D. J.; Skelly, D. W.

1997-06-01

Thermal barrier coatings (TBCs) have been developed for application to aircraft engine components to improve service life in an increasingly hostile thermal environment. The choice of TBC type is related to the component, intended use, and economics. Selection of electron beam physical vapor deposition proc-essing for turbine blade is due in part to part size, surface finish requirements, thickness control needs, and hole closure issues. Process development of PVD TBCs has been carried out at several different sites, including GE Aircraft Engines (GEAE). The influence of processing variables on microstructure is dis-cussed, along with the GEAE development coater and initial experiences of pilot line operation.

A Proven Method for Meeting Export Control Objectives in Postal and Shipping Sectors

DTIC Science & Technology

2015-02-01

Mellon University for the operation of the Software Engineering Institute, a federally funded research and development center sponsored by the United...Export Control at USPS 5 3.3 Objectives for Improving Export Screening at USPS 6 4 Development of the New Screening Process 7 4.1 “Walking the Model...Export Screening Development Process 10 Figure 2: Induction and Processing of International Mail 10 Figure 3: The Export Screening Process 11

System Engineering Processes at Kennedy Space Center for Development of SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric; Stambolian, Damon; Henderson, Gena

2013-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems are developed at the Kennedy Space Center Engineering Directorate. The Engineering Directorate at Kennedy Space Center follows a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Presentation describes this process with examples of where the process has been applied.

Exploratory Development on a New Process to Produce Improved RDX crystals: Supercritical Fluid Anti-Solvent Recrystallization

DTIC Science & Technology

1988-05-02

G. and J. Chiovini. Decaffeination Process . U.S. Patent 4,251.559; 17 February 1981. 43. Friedrich, J.P.. G.R. List, and A.J. Leakin. Petroleum...0 CONTRACT REPORT BRL-CR-606 EXPLORATORY DEVELOPMENT ON A NEW PROCESS TO PRODUCE IMPROVED RDX CRYSTALS: SUPERCRITICAL FLUID ANTI-SOLVENT...CCESSION NO. 11. TITLE (icnude Sun• y Uasuihcanon) I . • EXPLORATORY DEVELOPMENT ON A NEW PROCESS TO PRODUCE IMPROVED RDX CRYSTALS: SUPERCRITICAL

The Package-Based Development Process in the Flight Dynamics Division

NASA Technical Reports Server (NTRS)

Parra, Amalia; Seaman, Carolyn; Basili, Victor; Kraft, Stephen; Condon, Steven; Burke, Steven; Yakimovich, Daniil

1997-01-01

The Software Engineering Laboratory (SEL) has been operating for more than two decades in the Flight Dynamics Division (FDD) and has adapted to the constant movement of the software development environment. The SEL's Improvement Paradigm shows that process improvement is an iterative process. Understanding, Assessing and Packaging are the three steps that are followed in this cyclical paradigm. As the improvement process cycles back to the first step, after having packaged some experience, the level of understanding will be greater. In the past, products resulting from the packaging step have been large process documents, guidebooks, and training programs. As the technical world moves toward more modularized software, we have made a move toward more modularized software development process documentation, as such the products of the packaging step are becoming smaller and more frequent. In this manner, the QIP takes on a more spiral approach rather than a waterfall. This paper describes the state of the FDD in the area of software development processes, as revealed through the understanding and assessing activities conducted by the COTS study team. The insights presented include: (1) a characterization of a typical FDD Commercial Off the Shelf (COTS) intensive software development life-cycle process, (2) lessons learned through the COTS study interviews, and (3) a description of changes in the SEL due to the changing and accelerating nature of software development in the FDD.

Measuring the impact of computer resource quality on the software development process and product

NASA Technical Reports Server (NTRS)

Mcgarry, Frank; Valett, Jon; Hall, Dana

1985-01-01

The availability and quality of computer resources during the software development process was speculated to have measurable, significant impact on the efficiency of the development process and the quality of the resulting product. Environment components such as the types of tools, machine responsiveness, and quantity of direct access storage may play a major role in the effort to produce the product and in its subsequent quality as measured by factors such as reliability and ease of maintenance. During the past six years, the NASA Goddard Space Flight Center has conducted experiments with software projects in an attempt to better understand the impact of software development methodologies, environments, and general technologies on the software process and product. Data was extracted and examined from nearly 50 software development projects. All were related to support of satellite flight dynamics ground-based computations. The relationship between computer resources and the software development process and product as exemplified by the subject NASA data was examined. Based upon the results, a number of computer resource-related implications are provided.

The development of emotion perception in face and voice during infancy.

PubMed

Grossmann, Tobias

2010-01-01

Interacting with others by reading their emotional expressions is an essential social skill in humans. How this ability develops during infancy and what brain processes underpin infants' perception of emotion in different modalities are the questions dealt with in this paper. Literature review. The first part provides a systematic review of behavioral findings on infants' developing emotion-reading abilities. The second part presents a set of new electrophysiological studies that provide insights into the brain processes underlying infants' developing abilities. Throughout, evidence from unimodal (face or voice) and multimodal (face and voice) processing of emotion is considered. The implications of the reviewed findings for our understanding of developmental models of emotion processing are discussed. The reviewed infant data suggest that (a) early in development, emotion enhances the sensory processing of faces and voices, (b) infants' ability to allocate increased attentional resources to negative emotional information develops earlier in the vocal domain than in the facial domain, and (c) at least by the age of 7 months, infants reliably match and recognize emotional information across face and voice.

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

KSC Shuttle ground turnaround evaluation

NASA Technical Reports Server (NTRS)

Ragusa, J. M.

1983-01-01

Payload/mission development, processing flows, facilities/systems, and the various environments to which a payload is exposed during ground processing are described. These considerations are important for payload design and ground processing requirements development.

Risk management in medical product development process using traditional FMEA and fuzzy linguistic approach: a case study

NASA Astrophysics Data System (ADS)

Kirkire, Milind Shrikant; Rane, Santosh B.; Jadhav, Jagdish Rajaram

2015-12-01

Medical product development (MPD) process is highly multidisciplinary in nature, which increases the complexity and the associated risks. Managing the risks during MPD process is very crucial. The objective of this research is to explore risks during MPD in a dental product manufacturing company and propose a model for risk mitigation during MPD process to minimize failure events. A case study approach is employed. The existing MPD process is mapped with five phases of the customized phase gate process. The activities during each phase of development and risks associated with each activity are identified and categorized based on the source of occurrence. The risks are analyzed using traditional Failure mode and effect analysis (FMEA) and fuzzy FMEA. The results of two methods when compared show that fuzzy approach avoids the duplication of RPNs and helps more to convert cognition of experts into information to get values of risk factors. The critical, moderate, low level and negligible risks are identified based on criticality; risk treatments and mitigation model are proposed. During initial phases of MPD, the risks are less severe, but as the process progresses the severity of risks goes on increasing. The MPD process should be critically designed and simulated to minimize the number of risk events and their severity. To successfully develop the products/devices within the manufacturing companies, the process risk management is very essential. A systematic approach to manage risks during MPD process will lead to the development of medical products with expected quality and reliability. This is the first research of its kind having focus on MPD process risks and its management. The methodology adopted in this paper will help the developers, managers and researchers to have a competitive edge over the other companies by managing the risks during the development process.

Flat-plate solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support research and development for an Experimental Process System Development Unit for producing semiconductor-grade silicon using the slane-to-silicon process are reported. The design activity was completed. About 95% of purchased equipment was received. The draft of the operations manual was about 50% complete and the design of the free-space system continued. The system using silicon power transfer, melting, and shotting on a psuedocontinuous basis was demonstrated.

Reasoning with case histories of process knowledge for efficient process development

NASA Technical Reports Server (NTRS)

Bharwani, Seraj S.; Walls, Joe T.; Jackson, Michael E.

1988-01-01

The significance of compiling case histories of empirical process knowledge and the role of such histories in improving the efficiency of manufacturing process development is discussed in this paper. Methods of representing important investigations as cases and using the information from such cases to eliminate redundancy of empirical investigations in analogous process development situations are also discussed. A system is proposed that uses such methods to capture the problem-solving framework of the application domain. A conceptual design of the system is presented and discussed.

Partnerships for Policy Development: A Case Study From Uganda’s Costed Implementation Plan for Family Planning

PubMed Central

Lipsky, Alyson B; Gribble, James N; Cahaelen, Linda; Sharma, Suneeta

2016-01-01

ABSTRACT In global health, partnerships between practitioners and policy makers facilitate stakeholders in jointly addressing those issues that require multiple perspectives for developing, implementing, and evaluating plans, strategies, and programs. For family planning, costed implementation plans (CIPs) are developed through a strategic government-led consultative process that results in a detailed plan for program activities and an estimate of the funding required to achieve an established set of goals. Since 2009, many countries have developed CIPs. Conventionally, the CIP approach has not been defined with partnerships as a focal point; nevertheless, cooperation between key stakeholders is vital to CIP development and execution. Uganda launched a CIP in November 2014, thus providing an opportunity to examine the process through a partnership lens. This article describes Uganda’s CIP development process in detail, grounded in a framework for assessing partnerships, and provides the findings from 22 key informant interviews. Findings reveal strengths in Uganda’s CIP development process, such as willingness to adapt and strong senior management support. However, the evaluation also highlighted challenges, including district health officers (DHOs), who are a key group of implementers, feeling excluded from the development process. There was also a lack of planning around long-term partnership practices that could help address anticipated execution challenges. The authors recommend that future CIP development efforts use a long-term partnership strategy that fosters accountability by encompassing both the short-term goal of developing the CIP and the longer-term goal of achieving the CIP objectives. Although this study focused on Uganda’s CIP for family planning, its lessons have implications for any policy or strategy development efforts that require multiple stakeholders to ensure successful execution. PMID:27353621

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.; Britt, J.; Birkmire, R.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., assisted by NREL's PV Manufacturing R&D program, have continued to advance CIGS production technology by developing trajectory-oriented predictive/control models, fault-tolerance control, control platform development, in-situ sensors, and process improvements. Modeling activities included developing physics-based and empirical models for CIGS and sputter-deposition processing, implementing model-based control, and applying predictive models to the construction of new evaporation sources and for control. Model-based control is enabled by implementing reduced or empirical models into a control platform. Reliability improvement activities include implementing preventive maintenance schedules; detecting failed sensors/equipment and reconfiguring to tinue processing; and systematicmore » development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which in turn have been enabled by control and reliability improvements due to this PV Manufacturing R&D program.« less

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Pre- and Post-Processing Tools to Streamline the CFD Process

NASA Technical Reports Server (NTRS)

Dorney, Suzanne Miller

2002-01-01

This viewgraph presentation provides information on software development tools to facilitate the use of CFD (Computational Fluid Dynamics) codes. The specific CFD codes FDNS and CORSAIR are profiled, and uses for software development tools with these codes during pre-processing, interim-processing, and post-processing are explained.

Multilayer ultra thick resist development for MEMS

NASA Astrophysics Data System (ADS)

Washio, Yasushi; Senzaki, Takahiro; Masuda, Yasuo; Saito, Koji; Obiya, Hiroyuki

2005-05-01

MEMS (Micro-Electro-Mechanical Systems) is achieved through a process technology, called Micro-machining. There are two distinct methods to manufacture a MEMS-product. One method is to form permanent film through photolithography, and the other is to form a non-permanent film resist after photolithography proceeded by etch or plating process. The three-dimensional ultra-fine processing technology based on photolithography, and is assembled by processes, such as anode junction, and post lithography processes such as etching and plating. Currently ORDYL PR-100 (Dry Film Type) is used for the permanent resist process. TOK has developed TMMR S2000 (Liquid Type) and TMMF S2000 (Dry Film Type) also. TOK has developed a new process utilizing these resist. The electro-forming method by photolithography is developed as one of the methods for enabling high resolution and high aspect formation. In recent years, it has become possible to manufacture conventionally difficult multilayer through our development with material and equipment project (M&E). As for material for electro-forming, it was checked that chemically amplified resist is optimal from the reaction mechanism as it is easily removed by the clean solution. Moreover, multiple plating formations were enabled with the resist through a new process. As for the equipment, TOK developed Applicator (It can apply 500 or more μms) and Developer, which achieves high throughput and quality. The detailed plating formations, which a path differs, and air wiring are realizable through M&E. From the above results, opposed to metallic mold plating, electro-forming method by resist, enabled to form high resolution and aspect pattern, at low cost. It is thought that the infinite possibility spreads by applying this process.

Process development of a New Haemophilus influenzae type b conjugate vaccine and the use of mathematical modeling to identify process optimization possibilities.

PubMed

Hamidi, Ahd; Kreeftenberg, Hans; V D Pol, Leo; Ghimire, Saroj; V D Wielen, Luuk A M; Ottens, Marcel

2016-05-01

Vaccination is one of the most successful public health interventions being a cost-effective tool in preventing deaths among young children. The earliest vaccines were developed following empirical methods, creating vaccines by trial and error. New process development tools, for example mathematical modeling, as well as new regulatory initiatives requiring better understanding of both the product and the process are being applied to well-characterized biopharmaceuticals (for example recombinant proteins). The vaccine industry is still running behind in comparison to these industries. A production process for a new Haemophilus influenzae type b (Hib) conjugate vaccine, including related quality control (QC) tests, was developed and transferred to a number of emerging vaccine manufacturers. This contributed to a sustainable global supply of affordable Hib conjugate vaccines, as illustrated by the market launch of the first Hib vaccine based on this technology in 2007 and concomitant price reduction of Hib vaccines. This paper describes the development approach followed for this Hib conjugate vaccine as well as the mathematical modeling tool applied recently in order to indicate options for further improvements of the initial Hib process. The strategy followed during the process development of this Hib conjugate vaccine was a targeted and integrated approach based on prior knowledge and experience with similar products using multi-disciplinary expertise. Mathematical modeling was used to develop a predictive model for the initial Hib process (the 'baseline' model) as well as an 'optimized' model, by proposing a number of process changes which could lead to further reduction in price. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:568-580, 2016. © 2016 American Institute of Chemical Engineers.

Integration of Speech and Natural Language

DTIC Science & Technology

1988-04-01

major activities: • Development of the syntax and semantics components for natural language processing. • Integration of the developed syntax and...evaluating the performance of speech recognition algonthms developed K» under the Strategic Computing Program. grs Our work on natural language processing...included the developement of a grammar (syntax) that uses the Uiuficanon gnmmaj formaMsm (an augmented context free formalism). The Unification

The Intersection of Identity Development and Peer Relationship Processes in Adolescence and Young Adulthood: Contributions of the Special Issue

ERIC Educational Resources Information Center

Galliher, Renee V.; Kerpelman, Jennifer L.

2012-01-01

This analysis of the papers in the special section on the intersection of identity development and peer relationship processes calls attention to conceptual contribution this collection of papers makes to the literature on identity development. Together these ten papers build on strong theoretical foundations in identity development, which posit…

A developer solution for tank processing of x-ray film under ambient, tropical conditions.

PubMed

Wayrynen, R E; McKinney, W E

1976-05-01

A modification of a proprietary 90-sec. x-ray-film developer which permits its use as a hand-tank developer at ambient temperatures between 21.6 degrees-30.6 degrees C (80 degrees-100 degrees F) is described. This processing technique is useful in tropical countries where the control of developer temperature is particularly difficult.

Development as a Complex Process of Change: Conception and Analysis of Projects, Programs and Policies

ERIC Educational Resources Information Center

Nordtveit, Bjorn Harald

2010-01-01

Development is often understood as a linear process of change towards Western modernity, a vision that is challenged by this paper, arguing that development efforts should rather be connected to the local stakeholders' sense of their own development. Further, the paper contends that Complexity Theory is more effective than a linear theory of…

The Challenge of Being an Instructional Designer for New Media Development: A View from the Practitioners.

ERIC Educational Resources Information Center

Liu, Min; Gibby, Scott; Quiros, Ondrea; Demps, Elaine

The rapid changes in the field of technology are redefining the process of developing technology-enhanced educational materials as well as the roles of developers involved in the process.The purpose of this study was to learn from practitioners the roles and responsibilities of an instructional designer in developing new media enhanced…

Developing a Multi Sensor Scanning System for Hardwood Inspection and Processing

Treesearch

Richard W. Conners; D.Earl Kline; Philip A. Araman

1995-01-01

For the last few years the authors as part of the Center for Automated Processing of Hardwoods have been attempting to develop a multiple sensor hardwood defect detection system. This development activity has been ongoing for approximately 6 years, a very long time in the commercial development world. This paper will report the progress that has been made and will...

Development of a Model for Measuring Scientific Processing Skills Based on Brain-Imaging Technology: Focused on the Experimental Design Process

ERIC Educational Resources Information Center

Lee, Il-Sun; Byeon, Jung-Ho; Kim, Young-shin; Kwon, Yong-Ju

2014-01-01

The purpose of this study was to develop a model for measuring experimental design ability based on functional magnetic resonance imaging (fMRI) during biological inquiry. More specifically, the researchers developed an experimental design task that measures experimental design ability. Using the developed experimental design task, they measured…

Using a Practical Instructional Development Process to Show That Integrating Lab and Active Learning Benefits Undergraduate Analytical Chemistry

ERIC Educational Resources Information Center

Goacher, Robyn E.; Kline, Cynthia M.; Targus, Alexis; Vermette, Paul J.

2017-01-01

We describe how a practical instructional development process helped a first-year assistant professor rapidly develop, implement, and assess the impact on her Analytical Chemistry course caused by three changes: (a) moving the lab into the same semester as the lecture, (b) developing a more collaborative classroom environment, and (c) increasing…

Training and Appointing Processes of School Leaders in Developed and Developing Countries: How Is the Situation in Turkey?

ERIC Educational Resources Information Center

Saglam, Aycan Çiçek; Geçer, Ali; Bag, Derya

2017-01-01

Goal of the study is to compare training and appointing processes of education administrators in developed and developing countries to see similarities and differences and also the situation in Turkey so as to give some suggestion thought to have some positive impacts on training and appointing-related problems of Turkish Education. Within the…

Information Processing Approaches to Cognitive Development

DTIC Science & Technology

1989-08-04

O’Connor (Eds.), Intelligence and learning . New York: Plenum Press. Deloache, J.S. (1988). The development of representation in young chidren . In H.W...Klahr, D., & Carver, S.M. (1988). Cognitive objectives in a LOGO debugging curriculum: Instruction, Learning , and Transfer. Cognitive Psychology, 20...Production system models of learning and development. Cambridge, MA: MIT Press. TWO KINDS OF INFORMATION PROCESSING APPROACHES TO COGNITIVE DEVELOPMENT

On-Site Pedagogical Content Knowledge Development

NASA Astrophysics Data System (ADS)

Chan, Kennedy Kam Ho; Yung, Benny Hin Wai

2015-05-01

Experiences and reflection have long been regarded as a foundation for pedagogical content knowledge (PCK) development. However, little is known about how experienced teachers develop their PCK via reflection-in-action during their moment-to-moment classroom instruction. Drawing upon data sources including classroom observations, semi-structured interviews and stimulated recall interviews based on lesson videos, this study examined instances when four experienced teachers were found to invent new instructional strategies/representations on the spot during the lesson (referred to as on-site PCK development) in their first attempts at teaching a new topic. The study documented the moment-to-moment experiences of the teachers, including their reconstructed thought processes associated with these instances of on-site PCK development. An explanatory model of a three-step process comprising a stimulus, an integration process and a response was advanced to account for the on-site PCK development observed among the teachers. Three categories of stimulus that triggered on-site PCK development were identified. Factors influencing the integration process and, hence, the resulting response, included teachers' subject matter knowledge of the new topic, their general pedagogical knowledge and their knowledge of student learning difficulties/prior knowledge related to the new topic. Implications for teacher professional development in terms of how to enhance teachers' on-site PCK development are discussed.

Framework Programmable Platform for the advanced software development workstation: Framework processor design document

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, Wes; Sanders, Les

1991-01-01

The design of the Framework Processor (FP) component of the Framework Programmable Software Development Platform (FFP) is described. The FFP is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by the model, this Framework Processor will take advantage of an integrated operating environment to provide automated support for the management and control of the software development process so that costly mistakes during the development phase can be eliminated.

A review of the silicon material task

NASA Technical Reports Server (NTRS)

Lutwack, R.

1984-01-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

High‐Volume Processed, ITO‐Free Superstrates and Substrates for Roll‐to‐Roll Development of Organic Electronics

PubMed Central

Hösel, Markus; Angmo, Dechan; Søndergaard, Roar R.; dos Reis Benatto, Gisele A.; Carlé, Jon E.; Jørgensen, Mikkel

2014-01-01

The fabrication of substrates and superstrates prepared by scalable roll‐to‐roll methods is reviewed. The substrates and superstrates that act as the flexible carrier for the processing of functional organic electronic devices are an essential component, and proposals are made about how the general availability of various forms of these materials is needed to accelerate the development of the field of organic electronics. The initial development of the replacement of indium‐tin‐oxide (ITO) for the flexible carrier materials is described and a description of how roll‐to‐roll processing development led to simplification from an initially complex make‐up to higher performing materials through a more simple process is also presented. This process intensification through process simplification is viewed as a central strategy for upscaling, increasing throughput, performance, and cost reduction. PMID:27980893

A review of the silicon material task

NASA Astrophysics Data System (ADS)

Lutwack, R.

1984-02-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

Basic visual perceptual processes in children with typical development and cerebral palsy: The processing of surface, length, orientation, and position.

PubMed

Schmetz, Emilie; Magis, David; Detraux, Jean-Jacques; Barisnikov, Koviljka; Rousselle, Laurence

2018-03-02

The present study aims to assess how the processing of basic visual perceptual (VP) components (length, surface, orientation, and position) develops in typically developing (TD) children (n = 215, 4-14 years old) and adults (n = 20, 20-25 years old), and in children with cerebral palsy (CP) (n = 86, 5-14 years old) using the first four subtests of the Battery for the Evaluation of Visual Perceptual and Spatial processing in children. Experiment 1 showed that these four basic VP processes follow distinct developmental trajectories in typical development. Experiment 2 revealed that children with CP present global and persistent deficits for the processing of basic VP components when compared with TD children matched on chronological age and nonverbal reasoning abilities.

Recovery and purification process development for monoclonal antibody production

PubMed Central

Ma, Junfen; Winter, Charles; Bayer, Robert

2010-01-01

Hundreds of therapeutic monoclonal antibodies (mAbs) are currently in development, and many companies have multiple antibodies in their pipelines. Current methodology used in recovery processes for these molecules are reviewed here. Basic unit operations such as harvest, Protein A affinity chromatography and additional polishing steps are surveyed. Alternative processes such as flocculation, precipitation and membrane chromatography are discussed. We also cover platform approaches to purification methods development, use of high throughput screening methods, and offer a view on future developments in purification methodology as applied to mAbs. PMID:20647768

Vacuum vapor deposition: A spinoff of space welding development

NASA Technical Reports Server (NTRS)

Poorman, R. M.

1991-01-01

A vapor deposition process has been defined through a spinoff effort of space welding development. In this development for welding in a space environment, a hollow electrode was used to add gas precisely at the welding arc. This provides gas for ionization which carries the welding arc current. During this welding development metal vapor coatings were observed. These coatings are unique in that they are produced by a new process. Some coatings produced and the potential of this new and innovative vapor deposition process are characterized. Advantages over prior art are discussed.

[Contention on the theory of processing techniques of Chinese materia medica in the Ming-Qing period].

PubMed

Chen, Bin; Jia, Tianzhu

2015-03-01

On the basis of the golden stage of development of processing techniques of medicinals in the Song dynasty, the theory and techniques of processing in the Ming-Qing dynasties developed and accomplished further. The knowledge of some physicians on the processing of common medicinal, such as Radix rehmannia and Radixophiopogonis, was questioned, with new idea of processing methods put forward and argued against those insisting traditional ones, marking the progress of the art of processing. By reviewing the contention of technical theory of medicinal processing in the Ming-Qing period, useful references can be provided for the inheritance and development of the traditional art of processing medicinals.

DEMONSTRATION BULLETIN: COLD TOP EX-SITU VITRIFICATION PROCESS - GEOTECH DEVELOPMENT CORPORATION

EPA Science Inventory

The Cold Top Vitrification process, developed by Geotech Development Corporation, is an ex-situ, submerged-electrode, resistance-melting technology. The technology is designed to transform heavy metal contaminated soil into a glassy, amorphous, non-leachable mass composed of inte...

A Methodology and a Web Platform for the Collaborative Development of Context-Aware Systems

PubMed Central

Martín, David; López-de-Ipiña, Diego; Alzua-Sorzabal, Aurkene; Lamsfus, Carlos; Torres-Manzanera, Emilio

2013-01-01

Information and services personalization is essential for an optimal user experience. Systems have to be able to acquire data about the user's context, process them in order to identify the user's situation and finally, adapt the functionality of the system to that situation, but the development of context-aware systems is complex. Data coming from distributed and heterogeneous sources have to be acquired, processed and managed. Several programming frameworks have been proposed in order to simplify the development of context-aware systems. These frameworks offer high-level application programming interfaces for programmers that complicate the involvement of domain experts in the development life-cycle. The participation of users that do not have programming skills but are experts in the application domain can speed up and improve the development process of these kinds of systems. Apart from that, there is a lack of methodologies to guide the development process. This article presents as main contributions, the implementation and evaluation of a web platform and a methodology to collaboratively develop context-aware systems by programmers and domain experts. PMID:23666131

Chemistry of the Konica Dry Color System

NASA Astrophysics Data System (ADS)

Suda, Yoshihiko; Ohbayashi, Keiji; Onodera, Kaoru

1991-08-01

While silver halide photosensitive materials offer superiority in image quality -- both in color and black-and-white -- they require chemical solutions for processing, and this can be a drawback. To overcome this, researchers turned to the thermal development of silver halide photographic materials, and met their first success with black-and-white images. Later, with the development of the Konica Dry Color System, color images were finally obtained from a completely dry thermal development system, without the use of water or chemical solutions. The dry color system is characterized by a novel chromogenic color image-forming technology and comprises four processes. (1) With the application of heat, a color developer precursor (CDP) decomposes to generate a p-phenylenediamine color developer (CD). (2) The CD then develops silver salts. (3) Oxidized CD then reacts with couplers to generate color image dyes. (4) Finally, the dyes diffuse from the system's photosensitive sheet to its image-receiving sheet. The authors have analyzed the kinetics of each of the system's four processes. In this paper, they report the kinetics of the system's first process, color developer (CD) generation.

Guidelines for performing systematic reviews in the development of toxicity factors.

PubMed

Schaefer, Heather R; Myers, Jessica L

2017-12-01

The Texas Commission on Environmental Quality (TCEQ) developed guidance on conducting systematic reviews during the development of chemical-specific toxicity factors. Using elements from publicly available frameworks, the TCEQ systematic review process was developed in order to supplement the existing TCEQ Guidelines for developing toxicity factors (TCEQ Regulatory Guidance 442). The TCEQ systematic review process includes six steps: 1) Problem Formulation; 2) Systematic Literature Review and Study Selection; 3) Data Extraction; 4) Study Quality and Risk of Bias Assessment; 5) Evidence Integration and Endpoint Determination; and 6) Confidence Rating. This document provides guidance on conducting a systematic literature review and integrating evidence from different data streams when developing chemical-specific reference values (ReVs) and unit risk factors (URFs). However, this process can also be modified or expanded to address other questions that would benefit from systematic review practices. The systematic review and evidence integration framework can improve regulatory decision-making processes, increase transparency, minimize bias, improve consistency between different risk assessments, and further improve confidence in toxicity factor development. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

24 CFR 3288.110 - Alternative Process agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Alternative Process agreements... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME DISPUTE RESOLUTION PROGRAM Alternative Process in HUD-Administered States § 3288.110 Alternative Process agreements. (a) Required agreement. To use the Alternative...

Extreme-ultraviolet and electron beam lithography processing using water developable resist material

NASA Astrophysics Data System (ADS)

Takei, Satoshi

2017-08-01

In order to achieve the use of pure water in the developable process of extreme-ultraviolet and electron beam lithography, instead of conventionally used tetramethylammonium hydroxide and organic solvents, a water developable resist material was designed and developed. The water-developable resist material was derived from woody biomass with beta-linked disaccharide unit for environmental affair, safety, easiness of handling, and health of the working people. 80 nm dense line patterning images with exposure dose of 22 μC/cm2 and CF4 etching selectivity of 1.8 with hardmask layer were provided by specific process conditions. The approach of our water-developable resist material will be one of the most promising technologies ready to be investigated into production of medical device applications.

Model Guided Design and Development Process for an Electronic Health Record Training Program

PubMed Central

He, Ze; Marquard, Jenna; Henneman, Elizabeth

2016-01-01

Effective user training is important to ensure electronic health record (EHR) implementation success. Though many previous studies report best practice principles and success and failure stories, current EHR training is largely empirically-based and often lacks theoretical guidance. In addition, the process of training development is underemphasized and underreported. A white paper by the American Medical Informatics Association called for models of user training for clinical information system implementation; existing instructional development models from learning theory provide a basis to meet this call. We describe in this paper our experiences and lessons learned as we adapted several instructional development models to guide our development of EHR user training. Specifically, we focus on two key aspects of this training development: training content and training process. PMID:28269940

Development of a monolithic ferrite memory array

NASA Technical Reports Server (NTRS)

Heckler, C. H., Jr.; Bhiwandker, N. C.

1972-01-01

The results of the development and testing of ferrite monolithic memory arrays are presented. This development required the synthesis of ferrite materials having special magnetic and physical characteristics and the development of special processes; (1) for making flexible sheets (laminae) of the ferrite composition, (2) for embedding conductors in ferrite, and (3) bonding ferrite laminae together to form a monolithic structure. Major problems encountered in each of these areas and their solutions are discussed. Twenty-two full-size arrays were fabricated and fired during the development of these processes. The majority of these arrays were tested for their memory characteristics as well as for their physical characteristics and the results are presented. The arrays produced during this program meet the essential goals and demonstrate the feasibility of fabricating monolithic ferrite memory arrays by the processes developed.

Development and Validation of a Shear Punch Test Fixture

DTIC Science & Technology

2013-08-01

composites (MMC) manufactured by friction stir processing (FSP) that are being developed as part of a Technology Investment Fund (TIF) project, as the...leading a team of government departments and academics to develop a friction stir processing (FSP) based procedure to create metal matrix composite... friction stir process to fabricate surface metal matrix composites in aluminum alloys for potential application in light armoured vehicles. The

Measuring the software process and product: Lessons learned in the SEL

NASA Technical Reports Server (NTRS)

Basili, V. R.

1985-01-01

The software development process and product can and should be measured. The software measurement process at the Software Engineering Laboratory (SEL) has taught a major lesson: develop a goal-driven paradigm (also characterized as a goal/question/metric paradigm) for data collection. Project analysis under this paradigm leads to a design for evaluating and improving the methodology of software development and maintenance.

The Systems Engineering Process for Human Support Technology Development

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

Systems engineering is designing and optimizing systems. This paper reviews the systems engineering process and indicates how it can be applied in the development of advanced human support systems. Systems engineering develops the performance requirements, subsystem specifications, and detailed designs needed to construct a desired system. Systems design is difficult, requiring both art and science and balancing human and technical considerations. The essential systems engineering activity is trading off and compromising between competing objectives such as performance and cost, schedule and risk. Systems engineering is not a complete independent process. It usually supports a system development project. This review emphasizes the NASA project management process as described in NASA Procedural Requirement (NPR) 7120.5B. The process is a top down phased approach that includes the most fundamental activities of systems engineering - requirements definition, systems analysis, and design. NPR 7120.5B also requires projects to perform the engineering analyses needed to ensure that the system will operate correctly with regard to reliability, safety, risk, cost, and human factors. We review the system development project process, the standard systems engineering design methodology, and some of the specialized systems analysis techniques. We will discuss how they could apply to advanced human support systems development. The purpose of advanced systems development is not directly to supply human space flight hardware, but rather to provide superior candidate systems that will be selected for implementation by future missions. The most direct application of systems engineering is in guiding the development of prototype and flight experiment hardware. However, anticipatory systems engineering of possible future flight systems would be useful in identifying the most promising development projects.

Vitamin D deficiency: infertility and neurodevelopmental diseases (attention deficit hyperactivity disorder, autism, and schizophrenia).

PubMed

Berridge, Michael J

2018-02-01

The process of development depends on a number of signaling systems that regulates the progressive sequence of developmental events. Infertility and neurodevelopmental diseases, such as attention deficit hyperactivity disorder, autism spectrum disorders, and schizophrenia, are caused by specific alterations in these signaling processes. Calcium signaling plays a prominent role throughout development beginning at fertilization and continuing through early development, implantation, and organ differentiation such as heart and brain development. Vitamin D plays a major role in regulating these signaling processes that control development. There is an increase in infertility and an onset of neurodevelopmental diseases when vitamin D is deficient. The way in which vitamin D deficiency acts to alter development is a major feature of this review. One of the primary functions of vitamin D is to maintain the phenotypic stability of both the Ca 2+ and redox signaling pathways that play such a key role throughout development.

Study on the Forming Process and Exploration of Concept of Human-Water Harmonization of Sustainable Development

NASA Astrophysics Data System (ADS)

Liu, Fang; Si, Liqi

2018-05-01

According to Maslow's hierarchy of needs, the process of human development and utilization of water resources can be divided into three stages: engineering water conservancy, resource water conservancy and harmonious coexistence between man and water. These three stages reflect the transformation of the idea of human development and utilization of water resources and eventually reach the state of harmony between human being and water. At the same time, this article draws on the experiences of water management under the thinking of sustainable development in the United States, Western Europe, Northern Europe and Africa. Finally, this paper points out that we need to realize the harmonious coexistence between man and water and sustainable development of water resources in the process of development and utilization of water resources, which is the inevitable requirement of the economic and social development.

The Use of Intervention Mapping to Develop a Tailored Web-Based Intervention, Condom-HIM

PubMed Central

2017-01-01

Background Many HIV (human immunodeficiency virus) prevention interventions are currently being implemented and evaluated, with little information published on their development. A framework highlighting the method of development of an intervention can be used by others wanting to replicate interventions or develop similar interventions to suit other contexts and settings. It provides researchers with a comprehensive development process of the intervention. Objective The objective of this paper was to describe how a systematic approach, intervention mapping, was used to develop a tailored Web-based intervention to increase condom use among HIV-positive men who have sex with men. Methods The intervention was developed in consultation with a multidisciplinary team composed of academic researchers, community members, Web designers, and the target population. Intervention mapping involved a systematic process of 6 steps: (1) needs assessment; (2) identification of proximal intervention objectives; (3) selection of theory-based intervention methods and practical strategies; (4) development of intervention components and materials; (5) adoption, implementation, and maintenance; and (6) evaluation planning. Results The application of intervention mapping resulted in the development of a tailored Web-based intervention for HIV-positive men who have sex with men, called Condom-HIM. Conclusions Using intervention mapping as a systematic process to develop interventions is a feasible approach that specifically integrates the use of theory and empirical findings. Outlining the process used to develop a particular intervention provides clarification on the conceptual use of experimental interventions in addition to potentially identifying reasons for intervention failures. PMID:28428162

Development of automation software for neutron activation analysis process in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Rahman, N. A. A.; Ibrahim, M. M.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.

2017-01-01

Neutron Activation Analysis (NAA) process has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s. Most of the procedures established especially from sample registration to sample analysis are performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient. Hence, a software to support the system automation is developed to provide an effective method to replace redundant manual data entries and produce faster sample analysis and calculation process. This paper describes the design and development of automation software for NAA process which consists of three sub-programs. The sub-programs are sample registration, hardware control and data acquisition; and sample analysis. The data flow and connection between the sub-programs will be explained. The software is developed by using National Instrument LabView development package.

Development of a beam builder for automatic fabrication of large composite space structures

NASA Technical Reports Server (NTRS)

Bodle, J. G.

1979-01-01

The composite material beam builder which will produce triangular beams from pre-consolidated graphite/glass/thermoplastic composite material through automated mechanical processes is presented, side member storage, feed and positioning, ultrasonic welding, and beam cutoff are formed. Each process lends itself to modular subsystem development. Initial development is concentrated on the key processes for roll forming and ultrasonic welding composite thermoplastic materials. The construction and test of an experimental roll forming machine and ultrasonic welding process control techniques are described.

Low cost solar array project: Experimental process system development unit for producing semiconductor-grade silicon using silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

The design, fabrication, and installation of an experimental process system development unit (EPSDU) were analyzed. Supporting research and development were performed to provide an information data base usable for the EPSDU and for technological design and economical analysis for potential scale-up of the process. Iterative economic analyses were conducted for the estimated product cost for the production of semiconductor grade silicon in a facility capable of producing 1000-MT/Yr.

Product Development and its Comparative Analysis by SLA, SLS and FDM Rapid Prototyping Processes

NASA Astrophysics Data System (ADS)

Choudhari, C. M.; Patil, V. D.

2016-09-01

To grab market and meeting deadlines has increased the scope of new methods in product design and development. Industries continuously strive to optimize the development cycles with high quality and cost efficient products to maintain market competitiveness. Thus the need of Rapid Prototyping Techniques (RPT) has started to play pivotal role in rapid product development cycle for complex product. Dimensional accuracy and surface finish are the corner stone of Rapid Prototyping (RP) especially if they are used for mould development. The paper deals with the development of part made with the help of Selective Laser Sintering (SLS), Stereo-lithography (SLA) and Fused Deposition Modelling (FDM) processes to benchmark and investigate on various parameters like material shrinkage rate, dimensional accuracy, time, cost and surface finish. This helps to conclude which processes can be proved to be effective and efficient in mould development. In this research work the emphasis was also given to the design stage of a product development to obtain an optimum design solution for an existing product.

FDA and NIST collaboration on standards development activities supporting innovation and translation of regenerative medicine products.

PubMed

Arcidiacono, Judith A; Bauer, Steven R; Kaplan, David S; Allocca, Clare M; Sarkar, Sumona; Lin-Gibson, Sheng

2018-06-01

The development of standards for the field of regenerative medicine has been noted as a high priority by several road-mapping activities. Additionally, the U.S. Congress recognizes the importance of standards in the 21st Century Cure Act. Standards will help to accelerate and streamline cell and gene therapy product development, ensure the quality and consistency of processes and products, and facilitate their regulatory approval. Although there is general agreement for the need of additional standards for regenerative medicine products, a shared understanding of standards is required for real progress toward the development of standards to advance regenerative medicine. Here, we describe the roles of standards in regenerative medicine as well as the process for standards development and the interactions of different entities in the standards development process. Highlighted are recent coordinated efforts between the U.S. Food and Drug Administration and the National Institute of Standards and Technology to facilitate standards development and foster science that underpins standards development. Published by Elsevier Inc.

Application of Proteomic Approaches to Accelerate Drug Development for Psychiatric Disorders.

PubMed

Rahmoune, Hassan; Martins-de-Souza, Daniel; Guest, Paul C

2017-01-01

Proteomic-based biomarkers are now an integral part of the drug development process. This chapter covers the role of proteomic biomarker tests as useful tools for improving preclinical research and clinical development. One medical area that has been lagging behind this process is the study of psychiatric disorders, and this is most likely due to the complexity of these diseases. The potential of incorporating biomarkers in the clinical pipeline to improve decision-making, accelerate drug development, improve translation and reduce development costs is also discussed, with a focus on psychiatric diseases like schizophrenia. This chapter will also discuss the next steps that must be taken to keep moving this process forwards.

Eco-friendly electron beam lithography using water-developable resist material derived from biomass

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Oshima, Akihiro; Wakabayashi, Takanori; Kozawa, Takahiro; Tagawa, Seiichi

2012-07-01

We investigated the eco-friendly electron beam (EB) lithography using a high-sensitive negative type of water-developable resist material derived from biomass on hardmask layer for tri-layer processes. A water developable, non-chemically amplified, high sensitive, and negative tone resist material in EB lithography was developed for environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of trimethylphenylammonium hydroxide. The images of 200 nm line and 800 nm space pattern with exposure dose of 7.0 μC/cm2 and CF4 etching selectivity of 2.2 with hardmask layer were provided by specific process conditions.

Airport Planning and Development Process: Analysis and Documentation Report

DOT National Transportation Integrated Search

1997-01-01

The Federal Aviation Administration (FAA) is facing extreme resource constraints : and increasing demands on the aviation system. The Airport Planning and : Development Process (APDP) links organizations, people, and processes together : to provide c...

Learning-Based Curriculum Development

ERIC Educational Resources Information Center

Nygaard, Claus; Hojlt, Thomas; Hermansen, Mads

2008-01-01

This article is written to inspire curriculum developers to centre their efforts on the learning processes of students. It presents a learning-based paradigm for higher education and demonstrates the close relationship between curriculum development and students' learning processes. The article has three sections: Section "The role of higher…

40 CFR 35.382 - Competitive process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants State Wetlands Development Grants (section 104(b)(3)) § 35.382 Competitive process. State Wetlands Development Grants are awarded on a competitive... the award as a State Wetlands Development Grant or add the funds to a Performance Partnership Grant...

40 CFR 35.382 - Competitive process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants State Wetlands Development Grants (section 104(b)(3)) § 35.382 Competitive process. State Wetlands Development Grants are awarded on a competitive... the award as a State Wetlands Development Grant or add the funds to a Performance Partnership Grant...

40 CFR 35.382 - Competitive process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants State Wetlands Development Grants (section 104(b)(3)) § 35.382 Competitive process. State Wetlands Development Grants are awarded on a competitive... the award as a State Wetlands Development Grant or add the funds to a Performance Partnership Grant...

MCPS Curriculum Development Planning Process.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD. Dept. of Instructional Planning and Development.

The procedure documented is used for the systemwide planning of curriculum development in Montgomery County, Maryland, and consists of three parts: a planning and review process; an instructional design and development model; and a proposed calendar for cyclical review of programs. Specific position responsibilities, organizational charts, and…

24 CFR 7.35 - Processing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Processing. 7.35 Section 7.35 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development EQUAL EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race...

24 CFR 7.35 - Processing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Processing. 7.35 Section 7.35 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development EQUAL EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race...

24 CFR 7.35 - Processing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Processing. 7.35 Section 7.35 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development EQUAL EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race...

24 CFR 7.35 - Processing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Processing. 7.35 Section 7.35 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development EQUAL EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race...

24 CFR 7.35 - Processing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Processing. 7.35 Section 7.35 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development EQUAL EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race...

The Growth of Developmental Thought: Implications for a New Evolutionary Psychology

PubMed Central

Lickliter, Robert

2009-01-01

Evolution has come to be increasingly discussed in terms of changes in developmental processes rather than simply in terms of changes in gene frequencies. This shift is based in large part on the recognition that since all phenotypic traits arise during ontogeny as products of individual development, a primary basis for evolutionary change must be variations in the patterns and processes of development. Further, the products of development are epigenetic, not just genetic, and this is the case even when considering the evolutionary process. These insights have led investigators to reconsider the established notion of genes as the primary cause of development, opening the door to research programs focused on identifying how genetic and non-genetic factors coact to guide and constrain the process of development and its outcomes. I explore this growth of developmental thought and its implications for the achievement of a unified theory of heredity, development, and evolution and consider its implications for the realization of a new, developmentally-based evolutionary psychology. PMID:19956346

SCI-U: E-learning for patient education in spinal cord injury rehabilitation

PubMed Central

Shepherd, John D.; Badger-Brown, Karla M.; Legassic, Matthew S.; Walia, Saagar; Wolfe, Dalton L.

2012-01-01

Background/objectives To develop an online patient education resource for use in spinal cord injury rehabilitation. Participants The development process involved more than 100 subject-matter experts (SMEs) (rehabilitation professionals and consumers) from across Canada. Preliminary evaluation was conducted with 25 end-users. Methods An iterative development process was coordinated by a project team; SMEs (including patients) developed the content in working groups using wiki-based tools. Multiple rounds of feedback based on early prototypes helped improve the courses during development. Results Five courses were created, each featuring more than 45 minutes of video content and hundreds of media assets. Preliminary evaluation results indicate that users were satisfied by the courses and perceived them to be effective. Conclusions This is an effective process for developing multimedia patient education resources; the involvement of patients in all parts of the process was particularly helpful. Future work will focus on implementation, integration into clinical practice and other delivery formats (smart phones, tablets). PMID:23031169

Documenting the decision structure in software development

NASA Technical Reports Server (NTRS)

Wild, J. Christian; Maly, Kurt; Shen, Stewart N.

1990-01-01

Current software development paradigms focus on the products of the development process. Much of the decision making process which produces these products is outside the scope of these paradigms. The Decision-Based Software Development (DBSD) paradigm views the design process as a series of interrelated decisions which involve the identification and articulation of problems, alternates, solutions and justifications. Decisions made by programmers and analysts are recorded in a project data base. Unresolved problems are also recorded and resources for their resolution are allocated by management according to the overall development strategy. This decision structure is linked to the products affected by the relevant decision and provides a process oriented view of the resulted system. Software maintenance uses this decision view of the system to understand the rationale behind the decisions affecting the part of the system to be modified. D-HyperCase, a prototype Decision-Based Hypermedia System is described and results of applying the DBSD approach during its development are presented.

Low-cost Solar Array Project. Feasibility of the Silane Process for Producing Semiconductor-grade Silicon

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility of Union Carbide's silane process for commercial application was established. An integrated process design for an experimental process system development unit and a commercial facility were developed. The corresponding commercial plant economic performance was then estimated.

Capability Maturity Model (CMM) for Software Process Improvements

NASA Technical Reports Server (NTRS)

Ling, Robert Y.

2000-01-01

This slide presentation reviews the Avionic Systems Division's implementation of the Capability Maturity Model (CMM) for improvements in the software development process. The presentation reviews the process involved in implementing the model and the benefits of using CMM to improve the software development process.

EFG Ribbon Technology

NASA Astrophysics Data System (ADS)

Schwirtlich, I. A.

Since the beginning of solar cell development based on crystalline silicon, there have been efforts to produce wafers directly from the melt instead of through crystallization of ingots. Ingots require slicing into the blocs and wafers which form the basis of solar cells. In the last 30 years, several dozen processes have been published that describe a variety of concepts. Only few of these processes could be developed to an acceptable degree of technical maturity. Among those successful technologies are the Dendritic Web process, the Edge Supported Pulling (ESP) process and the Edge-Defined-Film-Fed-Growth (EFG) process. The EFG Process was originally developed by Mobil Solar and, since the mid-1990s, belongs to SCHOTT Solar GmbH and its predecessors, respectively. The Ribbon Growth on Substrate (RGS) process was originally developed by Bayer AG and is now in a pilot project at the ECN, Petten. Considering the past 20 to 30 years, the EFG process has reached the most advanced state in terms of industrialization.

Research on the EDM Technology for Micro-holes at Complex Spatial Locations

NASA Astrophysics Data System (ADS)

Y Liu, J.; Guo, J. M.; Sun, D. J.; Cai, Y. H.; Ding, L. T.; Jiang, H.

2017-12-01

For the demands on machining micro-holes at complex spatial location, several key technical problems are conquered such as micro-Electron Discharge Machining (micro-EDM) power supply system’s development, the host structure’s design and machining process technical. Through developing low-voltage power supply circuit, high-voltage circuit, micro and precision machining circuit and clearance detection system, the narrow pulse and high frequency six-axis EDM machining power supply system is developed to meet the demands on micro-hole discharging machining. With the method of combining the CAD structure design, CAE simulation analysis, modal test, ODS (Operational Deflection Shapes) test and theoretical analysis, the host construction and key axes of the machine tool are optimized to meet the position demands of the micro-holes. Through developing the special deionized water filtration system to make sure that the machining process is stable enough. To verify the machining equipment and processing technical developed in this paper through developing the micro-hole’s processing flow and test on the real machine tool. As shown in the final test results: the efficient micro-EDM machining pulse power supply system, machine tool host system, deionized filtration system and processing method developed in this paper meet the demands on machining micro-holes at complex spatial locations.

A four phase development model for integrated care services in the Netherlands

PubMed Central

Minkman, Mirella MN; Ahaus, Kees TB; Huijsman, Robbert

2009-01-01

Background Multidisciplinary and interorganizational arrangements for the delivery of coherent integrated care are being developed in a large number of countries. Although there are many integrated care programs worldwide, the process of developing these programs and interorganizational collaboration is described in the literature only to a limited extent. The purpose of this study is to explore how local integrated care services are developed in the Netherlands, and to conceptualize and operationalize a development model of integrated care. Methods The research is based on an expert panel study followed by a two-part questionnaire, designed to identify the development process of integrated care. Essential elements of integrated care, which were developed in a previous Delphi and Concept Mapping Study, were analyzed in relation to development process of integrated care. Results Integrated care development can be characterized by four developmental phases: the initiative and design phase; the experimental and execution phase; the expansion and monitoring phase; and the consolidation and transformation phase. Different elements of integrated care have been identified in the various developmental phases. Conclusion The findings provide a descriptive model of the development process that integrated care services can undergo in the Netherlands. The findings have important implications for integrated care services, which can use the model as an instrument to reflect on their current practices. The model can be used to help to identify improvement areas in practice. The model provides a framework for developing evaluation designs for integrated care arrangements. Further research is recommended to test the developed model in practice and to add international experiences. PMID:19261176

Recovery of Uranium from Wet Phosphoric Acid by Solvent Extraction Processes

DOE PAGES

Beltrami, Denis; Cote, Gérard; Mokhtari, Hamid; ...

2014-11-17

Between 1951 and 1991, we developed about 17 processes to recover uranium from wet phosphoric acid (WPA), but the viability of these processes was subject to the variation of the uranium price market. Nowadays, uranium from WPA appears to be attractive due to the increase of the global uranium demand resulting from the emergence of developing countries. Moreover, the increasing demand provides impetus for a new look at the applicable technology with a view to improvements as well as altogether new approaches. This paper gives an overview on extraction processes developed in the past to recover uranium from wet phosphoricmore » acid (WPA) as well as the physicochemistry involved in these processes. Recent advances concerning the development of new extraction systems are also reported and discussed.« less

Commercialization of Ultra-Hard Ceramics for Cutting Tools Final Report CRADA No. TC0279.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landingham, R.; Neumann, T.

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Greenleaf Corporation (Greenleaf) to develop the technology for forming unique precursor nano-powders process that can be consolidated into ceramic products for industry. LLNL researchers have developed a solgel process for forming nano-ceramic powders. The nano powders are highly tailorable, allowing the explicit design of desired properties that lead to ultra hard materials with fine grain size. The present CRADA would allow the two parties to continue the development of the sol-gel process and the consolidation process in ordermore » to develop an industrially sound process for the manufacture of these ultra-hard materials.« less

The development of information processing biases in childhood anxiety: a review and exploration of its origins in parenting.

PubMed

Hadwin, Julie A; Garner, Matthew; Perez-Olivas, Gisela

2006-11-01

The aim of this paper is to explore parenting as one potential route through which information processing biases for threat develop in children. It reviews information processing biases in childhood anxiety in the context of theoretical models and empirical research in the adult anxiety literature. Specifically, it considers how adult models have been used and adapted to develop a theoretical framework with which to investigate information processing biases in children. The paper then considers research which specifically aims to understand the relationship between parenting and the development of information processing biases in children. It concludes that a clearer theoretical framework is required to understand the significance of information biases in childhood anxiety, as well as their origins in parenting.

A practitioner's guide to service development.

PubMed

Lees, Liz

2010-11-01

Service development and service improvement are complex concepts, but this should not prevent practitioners engaging in, or initiating, them. There is no set blueprint for service development so this article examines the process, describes the skills required, lists some change management tools and offers a guide to the stages involved. The article aims to demystify service development for those considering embarking on the process for the first time.

Development Process of a Praxeology for Supporting the Teaching of Proofs in a CAS Environment Based on Teachers' Experience in a Professional Development Course

ERIC Educational Resources Information Center

Zehavi, Nurit; Mann, Giora

2011-01-01

This paper presents the development process of a "praxeology" (theory-of-practice) for supporting the teaching of proofs in a CAS environment. The characteristics of the praxeology were elaborated within the frame of a professional development course for teaching analytic geometry with CAS. The theoretical framework draws on Chevallard's…

The Elements of an Effective Software Development Plan - Software Development Process Guidebook

DTIC Science & Technology

2011-11-11

standards and practices required for all XMPL software development. This SDP implements the <corporate> Standard Software Process (SSP). as tailored...Developing and integrating reusable software products • Approach to managing COTS/Reuse software implementation • COTS/Reuse software selection...final selection and submit to change board for approval MAINTENANCE Monitor current products for obsolescence or end of support Track new

Processes and process development in Taiwan

NASA Technical Reports Server (NTRS)

Hwang, H. L.

1986-01-01

Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

Development of a Computerized Adaptive Testing for Diagnosing the Cognitive Process of Grade 7 Students in Learning Algebra, Using Multidimensional Item Response Theory

ERIC Educational Resources Information Center

Senarat, Somprasong; Tayraukham, Sombat; Piyapimonsit, Chatsiri; Tongkhambanjong, Sakesan

2013-01-01

The purpose of this research is to develop a multidimensional computerized adaptive test for diagnosing the cognitive process of grade 7 students in learning algebra by applying multidimensional item response theory. The research is divided into 4 steps: 1) the development of item bank of algebra, 2) the development of the multidimensional…

Transformation from manufacturing process taxonomy to repair process taxonomy: a phenetic approach

NASA Astrophysics Data System (ADS)

Raza, Umair; Ahmad, Wasim; Khan, Atif

2018-02-01

The need of taxonomy is vital for knowledge sharing. This need has been portrayed by through-life engineering services/systems. This paper addresses this issue by repair process taxonomy development. Framework for repair process taxonomy was developed followed by its implementation. The importance of repair process taxonomy has been highlighted.

Systems Engineering in NASA's R&TD Programs

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

Systems engineering is largely the analysis and planning that support the design, development, and operation of systems. The most common application of systems engineering is in guiding systems development projects that use a phased process of requirements, specifications, design, and development. This paper investigates how systems engineering techniques should be applied in research and technology development programs for advanced space systems. These programs should include anticipatory engineering of future space flight systems and a project portfolio selection process, as well as systems engineering for multiple development projects.

Low Cost Manufacturing of Composite Cryotanks

NASA Technical Reports Server (NTRS)

Meredith, Brent; Palm, Tod; Deo, Ravi; Munafo, Paul M. (Technical Monitor)

2002-01-01

This viewgraph presentation reviews research and development of cryotank manufacturing conducted by Northrup Grumman. The objectives of the research and development included the development and validation of manufacturing processes and technology for fabrication of large scale cryogenic tanks, the establishment of a scale-up and facilitization plan for full scale cryotanks, the development of non-autoclave composite manufacturing processes, the fabrication of subscale tank joints for element tests, the performance of manufacturing risk reduction trials for the subscale tank, and the development of full-scale tank manufacturing concepts.

Understanding the effects of time on collaborative learning processes in problem based learning: a mixed methods study.

PubMed

Hommes, J; Van den Bossche, P; de Grave, W; Bos, G; Schuwirth, L; Scherpbier, A

2014-10-01

Little is known how time influences collaborative learning groups in medical education. Therefore a thorough exploration of the development of learning processes over time was undertaken in an undergraduate PBL curriculum over 18 months. A mixed-methods triangulation design was used. First, the quantitative study measured how various learning processes developed within and over three periods in the first 1,5 study years of an undergraduate curriculum. Next, a qualitative study using semi-structured individual interviews focused on detailed development of group processes driving collaborative learning during one period in seven tutorial groups. The hierarchic multilevel analyses of the quantitative data showed that a varying combination of group processes developed within and over the three observed periods. The qualitative study illustrated development in psychological safety, interdependence, potency, group learning behaviour, social and task cohesion. Two new processes emerged: 'transactive memory' and 'convergence in mental models'. The results indicate that groups are dynamic social systems with numerous contextual influences. Future research should thus include time as an important influence on collaborative learning. Practical implications are discussed.

Modeling and Analysis of the Reverse Water Gas Shift Process for In-Situ Propellant Production

NASA Technical Reports Server (NTRS)

Whitlow, Jonathan E.

2000-01-01

This report focuses on the development of mathematical models and simulation tools developed for the Reverse Water Gas Shift (RWGS) process. This process is a candidate technology for oxygen production on Mars under the In-Situ Propellant Production (ISPP) project. An analysis of the RWGS process was performed using a material balance for the system. The material balance is very complex due to the downstream separations and subsequent recycle inherent with the process. A numerical simulation was developed for the RWGS process to provide a tool for analysis and optimization of experimental hardware, which will be constructed later this year at Kennedy Space Center (KSC). Attempts to solve the material balance for the system, which can be defined by 27 nonlinear equations, initially failed. A convergence scheme was developed which led to successful solution of the material balance, however the simplified equations used for the gas separation membrane were found insufficient. Additional more rigorous models were successfully developed and solved for the membrane separation. Sample results from these models are included in this report, with recommendations for experimental work needed for model validation.

A validation study of the 1,2-indandione reagent for operational use in the UK: Part 2 - Optimization of processing conditions.

PubMed

Nicolasora, Niko; Downham, Rory; Dyer, Rachel-May; Hussey, Laura; Luscombe, Aoife; Sears, Vaughn

2018-05-02

This paper contains details of work carried out to identify the most effective processing conditions for the optimized 1,2-indandione/zn formulation developed for use under UK conditions. Using direct measurements of fluorescence taken from test spots of amino acids and eccrine sweat during oven processing, complemented with experiments on real fingermarks, it was established that processing temperatures above 120°C in the oven were detrimental to the fluorescence of the developed mark. Alternative methods of development to oven processing were found to be effective, but less controllable. High levels of humidification were also found to be detrimental to the fluorescence of 1,2-indandione developed marks, and oven processing at 100°C and 0% relative humidity is therefore recommended for further studies. It has also been shown that 1,2-indandione can develop fingermarks at temperatures as low as 20°C, making it a candidate for use at crime scenes. Copyright © 2018. Published by Elsevier B.V.

PROGame: A process framework for serious game development for motor rehabilitation therapy

PubMed Central

Jaume-i-Capó, Antoni; Moyà-Alcover, Biel

2018-01-01

Serious game development for rehabilitation therapy is becoming increasingly popular because of the motivational advantages that these types of applications provide. Consequently, the need for a common process framework for this category of software development has become increasingly evident. The goal is to guarantee that products are developed and validated by following a coherent and systematic method that leads to high-quality serious games. This paper introduces a new process framework for the development of serious games for motor rehabilitation therapy. We introduce the new model and demonstrate its application for the development of a serious game for the improvement of the balance and postural control of adults with cerebral palsy. The development of this application has been facilitated by two technological transfer contracts and is being exploited by two different organizations. According to clinical measurements, patients using the application improved from high fall risk to moderate fall risk. We believe that our development strategy can be useful not only for motor rehabilitation therapy, but also for the development of serious games in many other rehabilitation areas. PMID:29768472

PROGame: A process framework for serious game development for motor rehabilitation therapy.

PubMed

Amengual Alcover, Esperança; Jaume-I-Capó, Antoni; Moyà-Alcover, Biel

2018-01-01

Serious game development for rehabilitation therapy is becoming increasingly popular because of the motivational advantages that these types of applications provide. Consequently, the need for a common process framework for this category of software development has become increasingly evident. The goal is to guarantee that products are developed and validated by following a coherent and systematic method that leads to high-quality serious games. This paper introduces a new process framework for the development of serious games for motor rehabilitation therapy. We introduce the new model and demonstrate its application for the development of a serious game for the improvement of the balance and postural control of adults with cerebral palsy. The development of this application has been facilitated by two technological transfer contracts and is being exploited by two different organizations. According to clinical measurements, patients using the application improved from high fall risk to moderate fall risk. We believe that our development strategy can be useful not only for motor rehabilitation therapy, but also for the development of serious games in many other rehabilitation areas.

A resource for assessing information processing in the developing brain using EEG and eye tracking

PubMed Central

Langer, Nicolas; Ho, Erica J.; Alexander, Lindsay M.; Xu, Helen Y.; Jozanovic, Renee K.; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T.; Parra, Lucas C.; Milham, Michael P.; Kelly, Simon P.

2017-01-01

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6–44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes. PMID:28398357

A Systematic Process for Developing High Quality SaaS Cloud Services

NASA Astrophysics Data System (ADS)

La, Hyun Jung; Kim, Soo Dong

Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

A resource for assessing information processing in the developing brain using EEG and eye tracking.

PubMed

Langer, Nicolas; Ho, Erica J; Alexander, Lindsay M; Xu, Helen Y; Jozanovic, Renee K; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T; Parra, Lucas C; Milham, Michael P; Kelly, Simon P

2017-04-11

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6-44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes.

A continuous process for the development of Kodak Aerochrome Infrared Film 2443 as a negative

NASA Astrophysics Data System (ADS)

Klimes, D.; Ross, D. I.

1993-02-01

A process for the continuous dry-to-dry development of Kodak Aerochrome Infrared Film 2443 as a negative (CIR-neg) is described. The process is well suited for production processing of long film lengths. Chemicals from three commercial film processes are used with modifications. Sensitometric procedures are recommended for the monitoring of processing quality control. Sensitometric data and operational aerial exposures indicate that films developed in this process have approximately the same effective aerial film speed as films processed in the reversal process recommended by the manufacturer (Kodak EA-5). The CIR-neg process is useful when aerial photography is acquired for resources management applications which require print reproductions. Originals can be readily reproduced using conventional production equipment (electronic dodging) in black and white or color (color compensation).

Flexible, secure agent development framework

DOEpatents

Goldsmith,; Steven, Y [Rochester, MN

2009-04-07

While an agent generator is generating an intelligent agent, it can also evaluate the data processing platform on which it is executing, in order to assess a risk factor associated with operation of the agent generator on the data processing platform. The agent generator can retrieve from a location external to the data processing platform an open site that is configurable by the user, and load the open site into an agent substrate, thereby creating a development agent with code development capabilities. While an intelligent agent is executing a functional program on a data processing platform, it can also evaluate the data processing platform to assess a risk factor associated with performing the data processing function on the data processing platform.

Principles Supporting the Perceptional Teaching of Physics: A ``Practical Teaching Philosophy''

NASA Astrophysics Data System (ADS)

Kurki-Suonio, Kaarle

2011-03-01

This article sketches a framework of ideas developed in the context of decades of physics teacher-education that was entitled the "perceptional approach". Individual learning and the scientific enterprise are interpreted as different manifestations of the same process aimed at understanding the natural and social worlds. The process is understood to possess the basic nature of perception, where empirical meanings are first born and then conceptualised. The accumulation of perceived gestalts in the "structure of the mind" leads to structural perception and the generation of conceptual hierarchies, which form a general principle for the expansion of our understanding. The process undergoes hierarchical development from early sensory perception to individual learning and finally to science. The process is discussed in terms of a three-process dynamic. Scientific and technological processes are driven by the interaction of the mind and nature. They are embedded in the social process due to the interaction of individual minds. These sub-processes are defined by their aims: The scientific process affects the mind and aims at understanding; the technological process affects nature and aims at human well-being; and the social process aims at mutual agreement and cooperation. In hierarchical development the interaction of nature and the mind gets structured into a "methodical cycle" by procedures involving conscious activities. Its intuitive nature is preserved due to subordination of the procedures to empirical meanings. In physics, two dimensions of hierarchical development are distinguished: Unification development gives rise to a generalisation hierarchy of concepts; Quantification development transfers the empirical meanings to quantities, laws and theories representing successive hierarchical levels of quantitative concepts. Consequences for physics teaching are discussed in principle, and in the light of examples and experiences from physics teacher education.

24 CFR 3286.307 - Process for obtaining trainer's qualification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Process for obtaining trainer's qualification. 3286.307 Section 3286.307 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF...

Institutional Management through Organization Development.

ERIC Educational Resources Information Center

Ferguson, Charles O.

This paper provides information on the role of organizational development in the institutional planning process at Florida Junior College (FJC), using short statements on the functions and objectives of each of the major components within the planning process. First, an overview is provided of organizational development and its value in…

45 CFR 98.14 - Plan process.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Department of Health and Human Services GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND General Application Procedures § 98.14 Plan process. In the development of each Plan, as required pursuant to § 98.17... Federal, State, and local child care and early childhood development programs, including such programs for...

45 CFR 98.14 - Plan process.

Code of Federal Regulations, 2012 CFR

2012-10-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND General Application Procedures § 98.14 Plan process. In the development of each Plan, as required pursuant to § 98.17... Federal, State, and local child care and early childhood development programs, including such programs for...

45 CFR 98.14 - Plan process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND General Application Procedures § 98.14 Plan process. In the development of each Plan, as required pursuant to § 98.17... Federal, State, and local child care and early childhood development programs, including such programs for...

45 CFR 98.14 - Plan process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND General Application Procedures § 98.14 Plan process. In the development of each Plan, as required pursuant to § 98.17... Federal, State, and local child care and early childhood development programs, including such programs for...

45 CFR 98.14 - Plan process.

Code of Federal Regulations, 2013 CFR

2013-10-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND General Application Procedures § 98.14 Plan process. In the development of each Plan, as required pursuant to § 98.17... Federal, State, and local child care and early childhood development programs, including such programs for...

The Development of Individuation in Autism

ERIC Educational Resources Information Center

O'Hearn, Kirsten; Franconeri, Steven; Wright, Catherine; Minshew, Nancy; Luna, Beatriz

2013-01-01

Evidence suggests that people with autism rely less on holistic visual information than typical adults. The current studies examine this by investigating core visual processes that contribute to holistic processing--namely, individuation and element grouping--and how they develop in participants with autism and typically developing (TD)…

Information Processing Theory and Conceptual Development.

ERIC Educational Resources Information Center

Schroder, H. M.

An educational program based upon information processing theory has been developed at Southern Illinois University. The integrating theme was the development of conceptual ability for coping with social and personal problems. It utilized student information search and concept formation as foundations for discussion and judgment and was organized…

Theory Development: A Bridge between Practice and Research

ERIC Educational Resources Information Center

Southern, Stephen; Devlin, James

2010-01-01

Theory development is an intentional process by which marriage and family counselors may bridge the gap between research and practice. The theory building process includes inductive and deductive forms of reasoning, qualitative and quantitative approaches to knowledge development, and diffusion of innovations. Grounded theory provides an…

Development and Use of a Goal Setting/Attainment Process Designed To Measure a Teacher's Ability To Engage in Professional Growth and Leadership Initiatives.

ERIC Educational Resources Information Center

Minix, Nancy; And Others

The process used to evaluate progress in identifying the goals to be used in evaluating teacher performance under the Kentucky Career Ladder Program is described. The process pertains to two areas of teacher development: (1) professional growth and development, and (2) professional leadership and initiative. A total of 1,650 individuals were asked…

Analysis and Development of a Web-Enabled Planning and Scheduling Database Application

DTIC Science & Technology

2013-09-01

establishes an entity—relationship diagram for the desired process, constructs an operable database using MySQL , and provides a web- enabled interface for...development, develop, design, process, re- engineering, reengineering, MySQL , structured query language, SQL, myPHPadmin. 15. NUMBER OF PAGES 107 16...relationship diagram for the desired process, constructs an operable database using MySQL , and provides a web-enabled interface for the population of

Assessment of MSFCs Process for the Development and Activation of Space Act Agreements

NASA Technical Reports Server (NTRS)

Daugherty, Rachel A.

2014-01-01

A Space Act Agreement (SAA) is a contractual vehicle that NASA utilizes to form partnerships with non-NASA entities to stimulate cutting-edge innovation within the science and technology communities while concurrently supporting the NASA missions. SAAs are similar to traditional contracts in that they involve the commitment of Agency resources but allow more flexibility and are more cost effective to implement than traditional contracts. Consequently, the use of SAAs to develop partnerships has greatly increased over the past several years. To facilitate this influx of SAAs, Marshall Space Flight Center (MSFC) developed a process during a kaizen event to streamline and improve the quality of SAAs developed at the Center level. This study assessed the current SAA process to determine if improvements could be implemented to increase productivity, decrease time to activation, and improve the quality of deliverables. Using a combination of direct procedural observation, personnel interviews, and statistical analysis, elements of the process in need of remediation were identified and potential solutions developed. The findings focus primarily on the difficulties surrounding tracking and enforcing process adherence and communication issues among stakeholders. Potential solutions include utilizing customer relationship management (CRM) software to facilitate process coordination and co-locating or potentially merging the two separate organizations involved in SAA development and activation at MSFC.

Concise Review: Process Development Considerations for Cell Therapy

PubMed Central

Brieva, Thomas; Raviv, Lior; Rowley, Jon; Niss, Knut; Brandwein, Harvey; Oh, Steve; Karnieli, Ohad

2015-01-01

The development of robust and well-characterized methods of production of cell therapies has become increasingly important as therapies advance through clinical trials toward approval. A successful cell therapy will be a consistent, safe, and effective cell product, regardless of the cell type or application. Process development strategies can be developed to gain efficiency while maintaining or improving safety and quality profiles. This review presents an introduction to the process development challenges of cell therapies and describes some of the tools available to address production issues. This article will provide a summary of what should be considered to efficiently advance a cellular therapy from the research stage through clinical trials and finally toward commercialization. The identification of the basic questions that affect process development is summarized in the target product profile, and considerations for process optimization are discussed. The goal is to identify potential manufacturing concerns early in the process so they may be addressed effectively and thus increase the probability that a therapy will be successful. Significance The present study contributes to the field of cell therapy by providing a resource for those transitioning a potential therapy from the research stage to clinical and commercial applications. It provides the necessary steps that, when followed, can result in successful therapies from both a clinical and commercial perspective. PMID:26315572

[Development of guidance for the approval process of brand-new medical products and regenerative medicine products].

PubMed

Niimi, Shingo

2015-01-01

Ministry of Health, Labour and Weltare has been conducting development of guidance for the approval process of brand-new medical products/development of guidance for medical devices in collaboration with Ministry of Economy, Trade and Industry as part of measures to promote practical use of brand-new medical products since 2005. The objective of this project is to expedite the processes from developmental process of medical devices to approval review and to introduce the medical devices to medical front quickly.. Ministry of Health, Labour and Welfare side has been making guidance for the guide in approval process of brand-new medical products and regeneration medicine products to aim at acceleration and facilitation of development and approval process of innovative medical products. Twenty-two of the guidance have been issued as director of the evaluation and licensing division. The evaluation index about safety and efficacy required for medical devices and regenerative medicine products in progress were put together in these guidance and useful for medical devices developer to understand the point at the approved review. Therefore, I think that the evaluation index could also contribute to the efficient product development. The guidance about implantable artificial heart is issued as the representative example which was useful in the approved review.

Advanced Research Deposition System (ARDS) for processing CdTe solar cells

NASA Astrophysics Data System (ADS)

Barricklow, Keegan Corey

CdTe solar cells have been commercialized at the Gigawatt/year level. The development of volume manufacturing processes for next generation CdTe photovoltaics (PV) with higher efficiencies requires research systems with flexibility, scalability, repeatability and automation. The Advanced Research Deposition Systems (ARDS) developed by the Materials Engineering Laboratory (MEL) provides such a platform for the investigation of materials and manufacturing processes necessary to produce the next generation of CdTe PV. Limited by previous research systems, the ARDS was developed to provide process and hardware flexibility, accommodating advanced processing techniques, and capable of producing device quality films. The ARDS is a unique, in-line process tool with nine processing stations. The system was designed, built and assembled at the Materials Engineering Laboratory. Final assembly, startup, characterization and process development are the focus of this research. Many technical challenges encountered during the startup of the ARDS were addressed in this research. In this study, several hardware modifications needed for the reliable operation of the ARDS were designed, constructed and successfully incorporated into the ARDS. The effect of process condition on film properties for each process step was quantified. Process development to achieve 12% efficient baseline solar cell required investigation of discrete processing steps, troubleshooting process variation, and developing performance correlations. Subsequent to this research, many advances have been demonstrated with the ARDS. The ARDS consistently produces devices of 12% +/-.5% by the process of record (POR). The champion cell produced to date utilizing the ARDS has an efficiency of 16.2% on low cost commercial sodalime glass and utilizes advanced films. The ARDS has enabled investigation of advanced concepts for processing CdTe devices including, Plasma Cleaning, Plasma Enhanced Closed Space Sublimation (PECSS), Electron Reflector (ER) using Cd1-xMgxTe (CMT) structure and alternative device structures. The ARDS has been instrumental in the collaborative research with many institutions.

A Latent Variables Examination of Processing Speed, Response Inhibition, and Working Memory during Typical Development

PubMed Central

McAuley, Tara; White, Desirée

2010-01-01

The present study addressed three related aims: (1) to replicate and extend previous work regarding the non-unitary nature of processing speed, response inhibition, and working memory during development, (2) to quantify the rate at which processing speed, response inhibition, and working memory develop and the extent to which the development of these latter abilities reflect general changes in processing speed, and (3) to evaluate whether commonly used tasks of processing speed, response inhibition, and working memory are valid and reliable when used with a developmentally diverse group. To address these aims, a latent variables approach was used to analyze data from 147 participants 6 to 24 years of age. Results showed that processing speed, response inhibition, and working memory were separable abilities and that the extent of this separability was stable cross the age range of participants. All three constructs improved as a function of age; however, only the effect of age on working memory remained significant after processing speed was controlled. The psychometric properties of tasks used to assess the constructs were age invariant, thus validating their use in studies of executive development. PMID:20888572

Diversity of thermophilic populations during thermophilic aerobic digestion of potato peel slurry.

PubMed

Ugwuanyi, J O; Harvey, L M; McNeil, B

2008-01-01

To study the diversity of thermophiles during thermophilic aerobic digestion (TAD) of agro-food waste slurries under conditions similar to full-scale processes. Population diversity and development in TAD were studied by standard microbiological techniques and the processes monitored by standard fermentation procedures. Facultative thermophiles were identified as Bacillus coagulans and B. licheniformis, while obligate thermophiles were identified as B. stearothermophilus. They developed rapidly to peaks of 10(7) to 10(8) in

Goal setting with mothers in child development services.

PubMed

Forsingdal, S; St John, W; Miller, V; Harvey, A; Wearne, P

2014-07-01

The aim of this grounded theory study was to explore mothers' perspectives of the processes of collaborative goal setting in multidisciplinary child development services involving follow-up home therapy. Semi-structured interviews were conducted in South East Queensland, Australia with 14 mothers of children aged 3-6 years who were accessing multidisciplinary child development services. Interviews were focussed around the process of goal setting. A grounded theory of Maternal Roles in Goal Setting (The M-RIGS Model) was developed from analysis of data. Mothers assumed Dependent, Active Participator and Collaborator roles when engaging with the therapist in goal-setting processes. These roles were characterized by the mother's level of dependence on the therapist and insight into their child's needs and therapy processes. Goal Factors, Parent Factors and Therapist Factors influenced and added complexity to the goal-setting process. The M-RIGS Model highlights that mothers take on a range of roles in the goal-setting process. Although family-centred practice encourages negotiation and collaborative goal setting, parents may not always be ready to take on highly collaborative roles. Better understanding of parent roles, goal-setting processes and influencing factors will inform better engagement with families accessing multidisciplinary child development services. © 2013 John Wiley & Sons Ltd.

From Discovery to Production: Biotechnology of Marine Fungi for the Production of New Antibiotics.

PubMed

Silber, Johanna; Kramer, Annemarie; Labes, Antje; Tasdemir, Deniz

2016-07-21

Filamentous fungi are well known for their capability of producing antibiotic natural products. Recent studies have demonstrated the potential of antimicrobials with vast chemodiversity from marine fungi. Development of such natural products into lead compounds requires sustainable supply. Marine biotechnology can significantly contribute to the production of new antibiotics at various levels of the process chain including discovery, production, downstream processing, and lead development. However, the number of biotechnological processes described for large-scale production from marine fungi is far from the sum of the newly-discovered natural antibiotics. Methods and technologies applied in marine fungal biotechnology largely derive from analogous terrestrial processes and rarely reflect the specific demands of the marine fungi. The current developments in metabolic engineering and marine microbiology are not yet transferred into processes, but offer numerous options for improvement of production processes and establishment of new process chains. This review summarises the current state in biotechnological production of marine fungal antibiotics and points out the enormous potential of biotechnology in all stages of the discovery-to-development pipeline. At the same time, the literature survey reveals that more biotechnology transfer and method developments are needed for a sustainable and innovative production of marine fungal antibiotics.

Massively parallel information processing systems for space applications

NASA Technical Reports Server (NTRS)

Schaefer, D. H.

1979-01-01

NASA is developing massively parallel systems for ultra high speed processing of digital image data collected by satellite borne instrumentation. Such systems contain thousands of processing elements. Work is underway on the design and fabrication of the 'Massively Parallel Processor', a ground computer containing 16,384 processing elements arranged in a 128 x 128 array. This computer uses existing technology. Advanced work includes the development of semiconductor chips containing thousands of feedthrough paths. Massively parallel image analog to digital conversion technology is also being developed. The goal is to provide compact computers suitable for real-time onboard processing of images.

ISLE (Image and Signal Processing LISP Environment) reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherwood, R.J.; Searfus, R.M.

1990-01-01

ISLE is a rapid prototyping system for performing image and signal processing. It is designed to meet the needs of a person doing development of image and signal processing algorithms in a research environment. The image and signal processing modules in ISLE form a very capable package in themselves. They also provide a rich environment for quickly and easily integrating user-written software modules into the package. ISLE is well suited to applications in which there is a need to develop a processing algorithm in an interactive manner. It is straightforward to develop the algorithms, load it into ISLE, apply themore » algorithm to an image or signal, display the results, then modify the algorithm and repeat the develop-load-apply-display cycle. ISLE consists of a collection of image and signal processing modules integrated into a cohesive package through a standard command interpreter. ISLE developer elected to concentrate their effort on developing image and signal processing software rather than developing a command interpreter. A COMMON LISP interpreter was selected for the command interpreter because it already has the features desired in a command interpreter, it supports dynamic loading of modules for customization purposes, it supports run-time parameter and argument type checking, it is very well documented, and it is a commercially supported product. This manual is intended to be a reference manual for the ISLE functions The functions are grouped into a number of categories and briefly discussed in the Function Summary chapter. The full descriptions of the functions and all their arguments are given in the Function Descriptions chapter. 6 refs.« less

Demand driven salt clean-up in a molten salt fast reactor - Defining a priority list.

PubMed

Merk, B; Litskevich, D; Gregg, R; Mount, A R

2018-01-01

The PUREX technology based on aqueous processes is currently the leading reprocessing technology in nuclear energy systems. It seems to be the most developed and established process for light water reactor fuel and the use of solid fuel. However, demand driven development of the nuclear system opens the way to liquid fuelled reactors, and disruptive technology development through the application of an integrated fuel cycle with a direct link to reactor operation. The possibilities of this new concept for innovative reprocessing technology development are analysed, the boundary conditions are discussed, and the economic as well as the neutron physical optimization parameters of the process are elucidated. Reactor physical knowledge of the influence of different elements on the neutron economy of the reactor is required. Using an innovative study approach, an element priority list for the salt clean-up is developed, which indicates that separation of Neodymium and Caesium is desirable, as they contribute almost 50% to the loss of criticality. Separating Zirconium and Samarium in addition from the fuel salt would remove nearly 80% of the loss of criticality due to fission products. The theoretical study is followed by a qualitative discussion of the different, demand driven optimization strategies which could satisfy the conflicting interests of sustainable reactor operation, efficient chemical processing for the salt clean-up, and the related economic as well as chemical engineering consequences. A new, innovative approach of balancing the throughput through salt processing based on a low number of separation process steps is developed. Next steps for the development of an economically viable salt clean-up process are identified.

Guideline group composition and group processes: article 3 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

PubMed

Kunz, Regina; Fretheim, Atle; Cluzeau, Françoise; Wilt, Timothy J; Qaseem, Amir; Lelgemann, Monika; Kelson, Marcia; Guyatt, Gordon; Schünemann, Holger J

2012-12-01

Professional societies, like many other organizations around the world, have recognized the need to use more rigorous processes to ensure that health care recommendations are informed by the best available research evidence. This is the third of a series of 14 articles that were prepared to advise guideline developers in respiratory and other diseases on considerations for group compositions and group processes in guideline development, and how this can be effectively integrated in the context of respiratory disease guidelines on a national and international level. We updated a review of the literature addressing group composition and group process, focusing on the following questions: 1. How to compose a functioning and representative guideline group; Who should be included in a guideline panel?; How to select organizations, groups, and individuals; What expertise is needed?; Consultation with non-included groups. 2. How to assure a functioning group process; How to make the process constructive; Balancing participation and finding agreement; Administrative support; What constitutes sufficient resources? Our conclusions are based on available evidence from published literature, experience from guideline developers, and workshop discussions. Formal studies addressing optimal processes in developing guidelines are limited, and experience from guideline organizations supplement the formal studies. When resources are available, guideline development groups should aim for multidisciplinary groups, including patients. Prerequisites for a multidisciplinary group include: a strong chair experienced in group facilitation with broad acceptance in the group, training the group in guideline methodology, and professional technical support. Formal consensus developing methods have proved effective in reaching agreement on the final recommendations.

The life cycles of six multi-center adaptive clinical trials focused on neurological emergencies developed for the Advancing Regulatory Science initiative of the National Institutes of Health and US Food and Drug Administration: Case studies from the Adaptive Designs Accelerating Promising Treatments Into Trials Project.

PubMed

Guetterman, Timothy C; Fetters, Michael D; Mawocha, Samkeliso; Legocki, Laurie J; Barsan, William G; Lewis, Roger J; Berry, Donald A; Meurer, William J

2017-01-01

Clinical trials are complicated, expensive, time-consuming, and frequently do not lead to discoveries that improve the health of patients with disease. Adaptive clinical trials have emerged as a methodology to provide more flexibility in design elements to better answer scientific questions regarding whether new treatments are efficacious. Limited observational data exist that describe the complex process of designing adaptive clinical trials. To address these issues, the Adaptive Designs Accelerating Promising Treatments Into Trials project developed six, tailored, flexible, adaptive, phase-III clinical trials for neurological emergencies, and investigators prospectively monitored and observed the processes. The objective of this work is to describe the adaptive design development process, the final design, and the current status of the adaptive trial designs that were developed. To observe and reflect upon the trial development process, we employed a rich, mixed methods evaluation that combined quantitative data from visual analog scale to assess attitudes about adaptive trials, along with in-depth qualitative data about the development process gathered from observations. The Adaptive Designs Accelerating Promising Treatments Into Trials team developed six adaptive clinical trial designs. Across the six designs, 53 attitude surveys were completed at baseline and after the trial planning process completed. Compared to baseline, the participants believed significantly more strongly that the adaptive designs would be accepted by National Institutes of Health review panels and non-researcher clinicians. In addition, after the trial planning process, the participants more strongly believed that the adaptive design would meet the scientific and medical goals of the studies. Introducing the adaptive design at early conceptualization proved critical to successful adoption and implementation of that trial. Involving key stakeholders from several scientific domains early in the process appears to be associated with improved attitudes towards adaptive designs over the life cycle of clinical trial development.

Accelerating Drug Development: Antiviral Therapies for Emerging Viruses as a Model.

PubMed

Everts, Maaike; Cihlar, Tomas; Bostwick, J Robert; Whitley, Richard J

2017-01-06

Drug discovery and development is a lengthy and expensive process. Although no one, simple, single solution can significantly accelerate this process, steps can be taken to avoid unnecessary delays. Using the development of antiviral therapies as a model, we describe options for acceleration that cover target selection, assay development and high-throughput screening, hit confirmation, lead identification and development, animal model evaluations, toxicity studies, regulatory issues, and the general drug discovery and development infrastructure. Together, these steps could result in accelerated timelines for bringing antiviral therapies to market so they can treat emerging infections and reduce human suffering.

Second International Conference on Accelerating Biopharmaceutical Development

PubMed Central

2009-01-01

The Second International Conference on Accelerating Biopharmaceutical Development was held in Coronado, California. The meeting was organized by the Society for Biological Engineering (SBE) and the American Institute of Chemical Engineers (AIChE); SBE is a technological community of the AIChE. Bob Adamson (Wyeth) and Chuck Goochee (Centocor) were co-chairs of the event, which had the theme “Delivering cost-effective, robust processes and methods quickly and efficiently.” The first day focused on emerging disruptive technologies and cutting-edge analytical techniques. Day two featured presentations on accelerated cell culture process development, critical quality attributes, specifications and comparability, and high throughput protein formulation development. The final day was dedicated to discussion of technology options and new analysis methods provided by emerging disruptive technologies; functional interaction, integration and synergy in platform development; and rapid and economic purification process development. PMID:20065637

Midwifery participatory curriculum development: Transformation through active partnership.

PubMed

Sidebotham, Mary; Walters, Caroline; Chipperfield, Janine; Gamble, Jenny

2017-07-01

Evolving knowledge and professional practice combined with advances in pedagogy and learning technology create challenges for accredited professional programs. Internationally a sparsity of literature exists around curriculum development for professional programs responsive to regulatory and societal drivers. This paper evaluates a participatory curriculum development framework, adapted from the community development sector, to determine its applicability to promote engagement and ownership during the development of a Bachelor of Midwifery curriculum at an Australian University. The structures, processes and resulting curriculum development framework are described. A representative sample of key curriculum development team members were interviewed in relation to their participation. Qualitative analysis of transcribed interviews occurred through inductive, essentialist thematic analysis. Two main themes emerged: (1) 'it is a transformative journey' and (2) focused 'partnership in action'. Results confirmed the participatory curriculum development process provides symbiotic benefits to participants leading to individual and organisational growth and the perception of a shared curriculum. A final operational model using a participatory curriculum development process to guide the development of accredited health programs emerged. The model provides an appropriate structure to create meaningful collaboration with multiple stakeholders to produce a curriculum that is contemporary, underpinned by evidence and reflective of 'real world' practice. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis for collapse behavior of resist pattern in short develop time process using atomic force microscope

NASA Astrophysics Data System (ADS)

Sanada, Masakazu; Tamada, Osamu; Ishikawa, Atsushi; Kawai, Akira

2005-05-01

Adhesion property of resist is characterized with DPAT (direct peeling with atomic force microscope (AFM) tip) method using 193 nm resist patterns of 180 nm dot shape which were developed for various developing time between 12 and 120 seconds in order to analyze the phenomenon which the short develop time process had led to suppress the pattern collapse. Surface free energy and refractive index of resist film treated with the developing time were also investigated from a thermodynamic point of view. The balance model among surface energy was adopted for analyzing intrusion phenomenon of developer solution into the resist-substrate interface. It can be explained quantitatively that the intrusion energy of developer solution acts to weaken the adhesion strength of resist pattern to the substrate. Furthermore, the intrusion energy became larger with increasing developing time. Analysis with the DPAT method indicates that the pattern collapse occurs accompanied with interface and cohesion destruction. Interface-scientifically speaking, the short develop time process proved to be effective to suppress the pattern collapse because of higher adhesion energy of the resist pattern to the substrate in shorter developing time.

How inverse solver technologies can support die face development and process planning in the automotive industry

NASA Astrophysics Data System (ADS)

Huhn, Stefan; Peeling, Derek; Burkart, Maximilian

2017-10-01

With the availability of die face design tools and incremental solver technologies to provide detailed forming feasibility results in a timely fashion, the use of inverse solver technologies and resulting process improvements during the product development process of stamped parts often is underestimated. This paper presents some applications of inverse technologies that are currently used in the automotive industry to streamline the product development process and greatly increase the quality of a developed process and the resulting product. The first focus is on the so-called target strain technology. Application examples will show how inverse forming analysis can be applied to support the process engineer during the development of a die face geometry for Class `A' panels. The drawing process is greatly affected by the die face design and the process designer has to ensure that the resulting drawn panel will meet specific requirements regarding surface quality and a minimum strain distribution to ensure dent resistance. The target strain technology provides almost immediate feedback to the process engineer during the die face design process if a specific change of the die face design will help to achieve these specific requirements or will be counterproductive. The paper will further show how an optimization of the material flow can be achieved through the use of a newly developed technology called Sculptured Die Face (SDF). The die face generation in SDF is more suited to be used in optimization loops than any other conventional die face design technology based on cross section design. A second focus in this paper is on the use of inverse solver technologies for secondary forming operations. The paper will show how the application of inverse technology can be used to accurately and quickly develop trim lines on simple as well as on complex support geometries.

Collaboration in Global Software Engineering Based on Process Description Integration

NASA Astrophysics Data System (ADS)

Klein, Harald; Rausch, Andreas; Fischer, Edward

Globalization is one of the big trends in software development. Development projects need a variety of different resources with appropriate expert knowledge to be successful. More and more of these resources are nowadays obtained from specialized organizations and countries all over the world, varying in development approaches, processes, and culture. As seen with early outsourcing attempts, collaboration may fail due to these differences. Hence, the major challenge in global software engineering is to streamline collaborating organizations towards a successful conjoint development. Based on typical collaboration scenarios, this paper presents a structured approach to integrate processes in a comprehensible way.

Lev Semenovich Vygotsky (1896-1924): an introduction to the historico-cultural psychology and the development of the higher psychological processes.

PubMed

Derouesné, Christian

2017-09-01

In the 1930's LS Vygotsky developed an original conception of the psychology and the development of the higher psychological processes, which stands up the current theories in Russia and the West. He layed the bases for the study of the higher mental processes and their relationship with the brain functioning, which will be later on developped by AR Luria. After a brief historical notice, this paper will specify the relationships between Vygoski and Marx's and Engels's philosophy, the Soviet power and the works of Freud and Piaget.

Discussion on the Development of Green Chemistry and Chemical Engineering

NASA Astrophysics Data System (ADS)

Zhang, Yunshen

2017-11-01

Chemical industry plays a vital role in the development process of national economy. However, in view of the special nature of the chemical industry, a large number of poisonous and harmful substances pose a great threat to the ecological environment and human health in the entire process of raw material acquisition, production, transportation, product manufacturing, and the final practical application. Therefore, it is a general trend to promote the development of chemistry and chemical engineering towards a greener environment. This article will focus on some basic problems occurred in the development process of green chemistry and chemical engineering.

[Contribution of microbiologists of Kirov City to development of penicillin and streptomycin production processes (70 years since development of technology for submerged production of first domestic antibiotics)].

PubMed

Bakulin, M K; Tumanov, A S; Bakulin, V M; Kalininskiĭ, V B

2014-01-01

The publication is concerned with development of the technological processes for submered production of the first domestic antibiotics 70 years age. The literature data on the contribution of the microbiologists of the Kirov City and mainly the workers of the Red Army Research Institute of Epidemiology and Hygiene (nowadays Central Research Institute No. 48 of the Ministry of Defense of the Russian Federation, Kirov), to development of the manufacture processes for production of penicillin and streptomycin are reviewed.

Process development and tooling design for intrinsic hybrid composites

NASA Astrophysics Data System (ADS)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

Model-Driven Useware Engineering

NASA Astrophysics Data System (ADS)

Meixner, Gerrit; Seissler, Marc; Breiner, Kai

User-oriented hardware and software development relies on a systematic development process based on a comprehensive analysis focusing on the users' requirements and preferences. Such a development process calls for the integration of numerous disciplines, from psychology and ergonomics to computer sciences and mechanical engineering. Hence, a correspondingly interdisciplinary team must be equipped with suitable software tools to allow it to handle the complexity of a multimodal and multi-device user interface development approach. An abstract, model-based development approach seems to be adequate for handling this complexity. This approach comprises different levels of abstraction requiring adequate tool support. Thus, in this chapter, we present the current state of our model-based software tool chain. We introduce the use model as the core model of our model-based process, transformation processes, and a model-based architecture, and we present different software tools that provide support for creating and maintaining the models or performing the necessary model transformations.

Distributed Computing Framework for Synthetic Radar Application

NASA Technical Reports Server (NTRS)

Gurrola, Eric M.; Rosen, Paul A.; Aivazis, Michael

2006-01-01

We are developing an extensible software framework, in response to Air Force and NASA needs for distributed computing facilities for a variety of radar applications. The objective of this work is to develop a Python based software framework, that is the framework elements of the middleware that allows developers to control processing flow on a grid in a distributed computing environment. Framework architectures to date allow developers to connect processing functions together as interchangeable objects, thereby allowing a data flow graph to be devised for a specific problem to be solved. The Pyre framework, developed at the California Institute of Technology (Caltech), and now being used as the basis for next-generation radar processing at JPL, is a Python-based software framework. We have extended the Pyre framework to include new facilities to deploy processing components as services, including components that monitor and assess the state of the distributed network for eventual real-time control of grid resources.

Economic corridor of industrial development in Indonesia

NASA Astrophysics Data System (ADS)

Berawi, M. A.; Miraj, P.; Sidqi, H.

2017-12-01

Indonesia as an archipelago country categorize its regional development into six corridors from Sumatra, Java, Kalimantan, Sulawesi, Bali-Nusa Tenggara and Papua-Maluku. Currently, industrial development becomes one of the highest contributing factors to the national economic growth. However, each region in the nation experience inequality of development mainly related to the infrastructure sector. Thus, the research aims to develop a sustainable economic corridor by considering the characteristics and its potential. The research uses a qualitative approach through a desk study, benchmarking and in-depth interview. Location Quotient is used for the method of the analysis tool. The results show each characteristic of every corridor in the country. Sumatera as national plantation and processing industry corridor, Java as cyber technology innovation and services center, Kalimantan as national energy reserves and processing, Sulawesi as national aquaculture and processing industry, Bali - Nusa Tenggara as national eco-tourism center, and Papua - Maluku as national ore mining and processing.

Using sex differences in the developing brain to identify nodes of influence for seizure susceptibility and epileptogenesis.

PubMed

Kight, Katherine E; McCarthy, Margaret M

2014-12-01

Sexual differentiation of the developing brain organizes the neural architecture differently between males and females, and the main influence on this process is exposure to gonadal steroids during sensitive periods of prenatal and early postnatal development. Many molecular and cellular processes are influenced by steroid hormones in the developing brain, including gene expression, cell birth and death, neurite outgrowth and synaptogenesis, and synaptic activity. Perturbations in these processes can alter neuronal excitability and circuit activity, leading to increased seizure susceptibility and the promotion of pathological processes that constitute epileptogenesis. In this review, we will provide a general overview of sex differences in the early developing brain that may be relevant for altered seizure susceptibility in early life, focusing on limbic areas of the brain. Sex differences that have the potential to alter the progress of epileptogenesis are evident at molecular and cellular levels in the developing brain, and include differences in neuronal excitability, response to environmental insult, and epigenetic control of gene expression. Knowing how these processes differ between the sexes can help us understand fundamental mechanisms underlying gender differences in seizure susceptibility and epileptogenesis. Copyright © 2014 Elsevier Inc. All rights reserved.

Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

NASA Technical Reports Server (NTRS)

Carl, John G.

1973-01-01

This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

Validity and Reliability Study of the Turkish Version of Ego Identity Process Questionairre

ERIC Educational Resources Information Center

Morsünbül, Ümit; Atak, Hasan

2013-01-01

The main developmental task is identity development in adolescence period. Marcia defined four identity statuses based on exploration and commitment process: Achievement, moratorium, foreclosure and diffusion. Certain scales were developed to measure identity development. Another questionnaire that evaluates both four identity statuses and the…

Educational Technology in Military Training Applications: A Current Assessment.

ERIC Educational Resources Information Center

Platt, William A.; Andrews, Dee H.

This chapter considers the history of instructional development (ID) in the military, with particular emphasis on the U.S. Navy. The ID process used at the Navy's Instructional Program Development Centers is presented, including the process for simulator development. An in-depth analysis of the problems encountered with educational technology…

Rotational Molding Process Technician. Instructional Program Package.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

This curriculum package contains materials developed through a partnership of the Association of Rotational Molders, El Paso Community College (Texas), and the College of DuPage (Illinois). The materials, which were developed during a 2-day DACUM (Developing a Curriculum) process, are based on national skill standards and designed for…

Small Fluxgate Magnetometers: Development and Future Trends in Spain

PubMed Central

Ciudad, David; Díaz-Michelena, Marina; Pérez, Lucas; Aroca, Claudio

2010-01-01

In this paper, we give an overview of the research on fluxgate magnetometers carried out in Spain. In particular we focus in the development of the planar-type instruments. We summarize the fabrication processes and signal processing developments as well as their use in complex systems and space. PMID:22294904

The Four Levels of Web Site Development Expertise.

ERIC Educational Resources Information Center

Ingram, Albert L.

2000-01-01

Discusses the design of Web pages and sites and proposes a four-level model of Web development expertise that can serve as a curriculum overview or as a plan for an individual's professional development. Highlights include page design, media use, client-side processing, server-side processing, and site structure. (LRW)

The Development of Basic Reading Skills in Children: A Cross-Language Perspective.

ERIC Educational Resources Information Center

Geva, Esther; Wang, Min

2001-01-01

Reviews recent research evidence for universal and orthography- or language-specific processes in the development of basic reading skills in school-age children. The review focuses on three different aspects of reading--phonological processing, rapid naming, and morphosyntactic complexity--targeted in recent research on development of word…

Small fluxgate magnetometers: development and future trends in Spain.

PubMed

Ciudad, David; Díaz-Michelena, Marina; Pérez, Lucas; Aroca, Claudio

2010-01-01

In this paper, we give an overview of the research on fluxgate magnetometers carried out in Spain. In particular we focus in the development of the planar-type instruments. We summarize the fabrication processes and signal processing developments as well as their use in complex systems and space.

Technique development for conducting mechanical tests to study the pore formation process in case of material fracture

NASA Astrophysics Data System (ADS)

Magomedova, D. K.; Efimov, M. A.; Murashkin, M. Yu.

2018-05-01

The main purpose of this work was the development of an experimental technique for search and analysis of pore formation in the presented material. Geometry of the samples, the procedure of experiment and processing the samples for investigation were developed.

Whole of Government Approach Through Interagency Partner Development: National Security Professional Development

DTIC Science & Technology

2014-06-13

experience with partner departments; and 3) acculturation of all partners through immersion in these interagency partner developments.” Also in the...military student to create an acculturation process in which both the DOD and non-DOD personnel gain an understanding of the processes and cultures of

Teacher Professional Development for TPACK-21CL: Effects on Teacher ICT Integration and Student Outcomes

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Chai, Ching Sing; Lim, Wei Ying

2017-01-01

This article explicates the conception and evaluation of an information and communications technologies (ICT) professional development process for developing teachers' technological pedagogical content knowledge for 21st century learning. The process emphasizes teachers' prolonged engagement with peers and researchers in design teams. Supported by…

Planning and Teaching Creatively within a Required Curriculum for School-Age Learners

ERIC Educational Resources Information Center

McKay, Penny, Ed.; Graves, Kathleen, Ed.

2006-01-01

As the second volume of a seven-volume series, this book describes curriculum development as three interrelated processes: planning, enacting, and evaluating. Curriculum development is a dynamic process that happens among learners and teachers in the classroom. In this volume, readers will encounter teachers, curriculum developers, and…

24 CFR 81.53 - Processing of program requests.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Processing of program requests. 81.53 Section 81.53 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development THE SECRETARY OF HUD'S REGULATION OF THE FEDERAL NATIONAL MORTGAGE ASSOCIATION (FANNIE...

Natural disturbance and stand development principles for ecological forestry

Treesearch

Jerry F. Franklin; Robert J. Mitchell; Brian J. Palik

2007-01-01

Foresters use natural disturbances and stand development processes as models for silvicultural practices in broad conceptual ways. Incorporating an understanding of natural disturbance and stand development processes more fully into silvicultural practice is the basis for an ecological forestry approach. Such an approach must include 1) understanding the importance of...

Developing Sensitivity to Subword Combinatorial Orthographic Regularity (SCORe): A Two-Process Framework

ERIC Educational Resources Information Center

Mano, Quintino R.

2016-01-01

Accumulating evidence suggests that literacy acquisition involves developing sensitivity to the statistical regularities of the textual environment. To organize accumulating evidence and help guide future inquiry, this article integrates data from disparate fields of study and formalizes a new two-process framework for developing sensitivity to…

76 FR 20673 - Announcement of Notice; Proposed Establishment of a Federally Funded Research and Development...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-13

... Research and Development Center (FFRDC) to facilitate the modernization of business processes and..., Simulations, and Cost Modeling Federally Funded Research and Development Center (FFRDC) to facilitate the modernization of business processes and supporting systems and their operations. Some of the broad task areas...

Developing a Leadership Identity: A Grounded Theory

ERIC Educational Resources Information Center

Komives, Susan R.; Owen, Julie E; Longerbeam, Susan D.; Mainella, Felicia C.; Osteen, Laura

2005-01-01

This grounded theory study on developing a leadership identity revealed a 6-stage developmental process. The thirteen diverse students in this study described their leadership identity as moving from a leader-centric view to one that embraced leadership as a collaborative, relational process. Developing a leadership identity was connected to the…

Understanding Acceptance of Software Metrics--A Developer Perspective

ERIC Educational Resources Information Center

Umarji, Medha

2009-01-01

Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

The Contributions of Bernstein's Sociology to Education Development Research

ERIC Educational Resources Information Center

Sriprakash, Arathi

2011-01-01

Global and national agendas to improve the "quality" of Education For All have brought focus to pedagogic processes in developing country contexts. How can development research pay attention to the social and political significance of pedagogical projects and understand the micro-processes of classroom reform? This paper considers how…

On Several Relations in the Process of Developing Inclusive Education

ERIC Educational Resources Information Center

Jianghua, Lei; Meng, Deng

2007-01-01

Several issues must be addressed in the process of developing inclusive education in China. This paper reveals that the relevant stakeholders should deal carefully with the relations between universalization and quality enhancement, "learning in a regular classroom" (LRC), and the physical and psychological development of the students.…

Novel methodology to examine cognitive and experiential factors in language development: combining eye-tracking and LENA technology

PubMed Central

Odean, Rosalie; Nazareth, Alina; Pruden, Shannon M.

2015-01-01

Developmental systems theory posits that development cannot be segmented by influences acting in isolation, but should be studied through a scientific lens that highlights the complex interactions between these forces over time (Overton, 2013a). This poses a unique challenge for developmental psychologists studying complex processes like language development. In this paper, we advocate for the combining of highly sophisticated data collection technologies in an effort to move toward a more systemic approach to studying language development. We investigate the efficiency and appropriateness of combining eye-tracking technology and the LENA (Language Environment Analysis) system, an automated language analysis tool, in an effort to explore the relation between language processing in early development, and external dynamic influences like parent and educator language input in the home and school environments. Eye-tracking allows us to study language processing via eye movement analysis; these eye movements have been linked to both conscious and unconscious cognitive processing, and thus provide one means of evaluating cognitive processes underlying language development that does not require the use of subjective parent reports or checklists. The LENA system, on the other hand, provides automated language output that describes a child’s language-rich environment. In combination, these technologies provide critical information not only about a child’s language processing abilities but also about the complexity of the child’s language environment. Thus, when used in conjunction these technologies allow researchers to explore the nature of interacting systems involved in language development. PMID:26379591

Evaluation Criteria for Solid Waste Processing Research and Technology Development

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, J. A.; Alazraki, M. P.

2001-01-01

A preliminary list of criteria is proposed for evaluation of solid waste processing technologies for research and technology development (R&TD) in the Advanced Life Support (ALS) Program. Completion of the proposed list by current and prospective ALS technology developers, with regard to specific missions of interest, may enable identification of appropriate technologies (or lack thereof) and guide future development efforts for the ALS Program solid waste processing area. An attempt is made to include criteria that capture information about the technology of interest as well as its system-wide impacts. Some of the criteria in the list are mission-independent, while the majority are mission-specific. In order for technology developers to respond to mission-specific criteria, critical information must be available on the quantity, composition and state of the waste stream, the wast processing requirements, as well as top-level mission scenario information (e.g. safety, resource recovery, planetary protection issues, and ESM equivalencies). The technology readiness level (TRL) determines the degree to which a technology developer is able to accurately report on the list of criteria. Thus, a criteria-specific minimum TRL for mandatory reporting has been identified for each criterion in the list. Although this list has been developed to define criteria that are needed to direct funding of solid waste processing technologies, this list processes significant overlap in criteria required for technology selection for inclusion in specific tests or missions. Additionally, this approach to technology evaluation may be adapted to other ALS subsystems.

ASRM process development in aqueous cleaning

NASA Technical Reports Server (NTRS)

Swisher, Bill

1992-01-01

Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

Novel shortcut estimation method for regeneration energy of amine solvents in an absorption-based carbon capture process.

PubMed

Kim, Huiyong; Hwang, Sung June; Lee, Kwang Soon

2015-02-03

Among various CO2 capture processes, the aqueous amine-based absorption process is considered the most promising for near-term deployment. However, the performance evaluation of newly developed solvents still requires complex and time-consuming procedures, such as pilot plant tests or the development of a rigorous simulator. Absence of accurate and simple calculation methods for the energy performance at an early stage of process development has lengthened and increased expense of the development of economically feasible CO2 capture processes. In this paper, a novel but simple method to reliably calculate the regeneration energy in a standard amine-based carbon capture process is proposed. Careful examination of stripper behaviors and exploitation of energy balance equations around the stripper allowed for calculation of the regeneration energy using only vapor-liquid equilibrium and caloric data. Reliability of the proposed method was confirmed by comparing to rigorous simulations for two well-known solvents, monoethanolamine (MEA) and piperazine (PZ). The proposed method can predict the regeneration energy at various operating conditions with greater simplicity, greater speed, and higher accuracy than those proposed in previous studies. This enables faster and more precise screening of various solvents and faster optimization of process variables and can eventually accelerate the development of economically deployable CO2 capture processes.

Development of Regulatory Documents for Creation (Upgrade) of Physical Protection Systems under the Russian/American MPC&A Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izmaylov, Alexandr V.; Babkin, Vladimir; Kurov, Valeriy

2009-10-07

The development of new or the upgrade of existing physical protection systems (PPS) for nuclear facilities involves a multi-step and multidimensional process. The process consists of conceptual design, design, and commissioning stages. The activities associated with each of these stages are governed by Russian government and agency regulations. To ensure a uniform approach to development or upgrading of PPS at Russian nuclear facilities, the development of a range of regulatory and methodological documents is necessary. Some issues of PPS development are covered by the regulatory documents developed by Rosatom, as well as other Russian agencies with nuclear facilities under theirmore » control. This regulatory development has been accomplished as part of the U.S.-Russian MPC&A cooperation or independently by the Russian Federation. While regulatory coverage is extensive, there are a number of issues such as vulnerability analysis, effectiveness assessment, upgrading PPS, and protection of information systems for PPS that require additional regulations be developed. This paper reports on the status of regulatory coverage for PPS development or upgrade, and outlines a new approach to regulatory document development. It describes the evolutionary process of regulatory development through experience gained in the design, development and implementation of PPS as well as experience gained through the cooperative efforts of Russian and U.S. experts involved the development of MPC&A regulations.« less

E-Learning Quality Assurance: A Process-Oriented Lifecycle Model

ERIC Educational Resources Information Center

Abdous, M'hammed

2009-01-01

Purpose: The purpose of this paper is to propose a process-oriented lifecycle model for ensuring quality in e-learning development and delivery. As a dynamic and iterative process, quality assurance (QA) is intertwined with the e-learning development process. Design/methodology/approach: After reviewing the existing literature, particularly…

AAL service development loom--from the idea to a marketable business model.

PubMed

Kriegel, Johannes; Auinger, Klemens

2015-01-01

The Ambient Assisted Living (AAL) market is still in an early stage of development. Previous approaches of comprehensive AAL services are mostly supply-side driven and focused on hardware and software. Usually this type of AAL solutions does not lead to a sustainable success on the market. Research and development increasingly focuses on demand and customer requirements in addition to the social and legal framework. The question is: How can a systematic performance measurement strategy along a service development process support the market-ready design of a concrete business model for AAL service? Within the EU funded research project DALIA (Assistant for Daily Life Activities at Home) an iterative service development process uses an adapted Osterwalder business model canvas. The application of a performance measurement index (PMI) to support the process has been developed and tested. Development of an iterative service development model using a supporting PMI. The PMI framework is developed throughout the engineering of a virtual assistant (AVATAR) as a modular interface to connect informal carers with necessary and useful services. Future research should seek to ensure that the PMI enables meaningful transparency regarding targeting (e.g. innovative AAL service), design (e.g. functional hybrid AAL service) and implementation (e.g. marketable AAL support services). To this end, a further reference to further testing practices is required. The aim must be to develop a weighted PMI in the context of further research, which supports both the service engineering and the subsequent service management process.

Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

PubMed

Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

2014-06-01

The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development. Copyright © 2014 Elsevier B.V. All rights reserved.

Computer-aided design development transition for IPAD environment

NASA Technical Reports Server (NTRS)

Owens, H. G.; Mock, W. D.; Mitchell, J. C.

1980-01-01

The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

Design, Development, and Play of Navy Wargames.

DTIC Science & Technology

1987-03-01

Procedures ............................................. 20 Game Development ............................................... 25 W argam e Play...8217’ * ’ "" "" . "r ". . " . " . r " - ; ". " ". ". _". p GAME DEVELOPMENT Just as a research paper benefits from being edited prior to publication, even...a well-designed wargame benefits from the game development process. This process, which may or may not be a formal one, seeks to assure that the game

Needs Assessment for the Use of NASA Remote Sensing Data in the Development and Implementation of Estuarine and Coastal Water Quality Standards

NASA Technical Reports Server (NTRS)

Spiering, Bruce; Underwood, Lauren; Ellis, Chris; Lehrter, John; Hagy, Jim; Schaeffer, Blake

2010-01-01

The goals of the project are to provide information from satellite remote sensing to support numeric nutrient criteria development and to determine data processing methods and data quality requirements to support nutrient criteria development and implementation. The approach is to identify water quality indicators that are used by decision makers to assess water quality and that are related to optical properties of the water; to develop remotely sensed data products based on algorithms relating remote sensing imagery to field-based observations of indicator values; to develop methods to assess estuarine water quality, including trends, spatial and temporal variability, and seasonality; and to develop tools to assist in the development and implementation of estuarine and coastal nutrient criteria. Additional slides present process, criteria development, typical data sources and analyses for criteria process, the power of remote sensing data for the process, examples from Pensacola Bay, spatial and temporal variability, pixel matchups, remote sensing validation, remote sensing in coastal waters, requirements for remotely sensed data products, and needs assessment. An additional presentation examines group engagement and information collection. Topics include needs assessment purpose and objectives, understanding water quality decision making, determining information requirements, and next steps.

Design and development of a film-based intervention about teenage men and unintended pregnancy: applying the Medical Research Council framework in practice.

PubMed

Aventin, Áine; Lohan, Maria; O'Halloran, Peter; Henderson, Marion

2015-04-01

Following the UK Medical Research Council's (MRC) guidelines for the development and evaluation of complex interventions, this study aimed to design, develop and optimise an educational intervention about young men and unintended teenage pregnancy based around an interactive film. The process involved identification of the relevant evidence base, development of a theoretical understanding of the phenomenon of unintended teenage pregnancy in relation to young men, and exploratory mixed methods research. The result was an evidence-based, theory-informed, user-endorsed intervention designed to meet the much neglected pregnancy education needs of teenage men and intended to increase both boys' and girls' intentions to avoid an unplanned pregnancy during adolescence. In prioritising the development phase, this paper addresses a gap in the literature on the processes of research-informed intervention design. It illustrates the application of the MRC guidelines in practice while offering a critique and additional guidance to programme developers on the MRC prescribed processes of developing interventions. Key lessons learned were: (1) know and engage the target population and engage gatekeepers in addressing contextual complexities; (2) know the targeted behaviours and model a process of change; and (3) look beyond development to evaluation and implementation. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Synthetic cognitive development. Where intelligence comes from

NASA Astrophysics Data System (ADS)

Weinbaum (Weaver), D.; Veitas, V.

2017-01-01

The human cognitive system is a remarkable exemplar of a general intelligent system whose competence is not confined to a specific problem domain. Evidently, general cognitive competences are a product of a prolonged and complex process of cognitive development. Therefore, the process of cognitive development is a primary key to understanding the emergence of intelligent behavior. This paper develops the theoretical foundations for a model that generalizes the process of cognitive development. The model aims to provide a realistic scheme for the synthesis of scalable cognitive systems with an open-ended range of capabilities. Major concepts and theories of human cognitive development are introduced and briefly explored, focusing on the enactive approach to cognition and the concept of sense-making. The initial scheme of human cognitive development is then generalized by introducing the philosophy of individuation and the abstract mechanism of transduction. The theory of individuation provides the ground for the necessary paradigmatic shift from cognitive systems as given products to cognitive development as a formative process of self-organization. Next, the conceptual model is specified as a scalable scheme of networks of agents. The mechanisms of individuation are formulated in context-independent information theoretical terms. Finally, the paper discusses two concrete aspects of the generative model - mechanisms of transduction and value modulating systems. These are topics of further research towards an implementable architecture.

Reports of Planetary Geology Program, 1982

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1982-01-01

Work conducted in the Planetary Geology program is summarized. The following categories are presented: outer solar system satellites; asteroids and comets; Venus; cratering processes and landform development; volcanic processes and landforms; aolian processes and landforms; fluvial processes and landform development; periglacial and permafrost processes; structure, tectonics and stratigraphy; remote sensing and regolith studies; geologic mapping, cartography and geodesy.

Development of functionally-oriented technological processes of electroerosive processing

NASA Astrophysics Data System (ADS)

Syanov, S. Yu

2018-03-01

The stages of the development of functionally oriented technological processes of electroerosive processing from the separation of the surfaces of parts and their service functions to the determination of the parameters of the process of electric erosion, which will provide not only the quality parameters of the surface layer, but also the required operational properties, are described.

19 CFR 10.178 - Direct costs of processing operations performed in the beneficiary developing country.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Direct costs of processing operations performed in... processing operations performed in the beneficiary developing country. (a) Items included in the direct costs of processing operations. As used in § 10.176, the words “direct costs of processing operations...

Big Data Analysis of Manufacturing Processes

NASA Astrophysics Data System (ADS)

Windmann, Stefan; Maier, Alexander; Niggemann, Oliver; Frey, Christian; Bernardi, Ansgar; Gu, Ying; Pfrommer, Holger; Steckel, Thilo; Krüger, Michael; Kraus, Robert

2015-11-01

The high complexity of manufacturing processes and the continuously growing amount of data lead to excessive demands on the users with respect to process monitoring, data analysis and fault detection. For these reasons, problems and faults are often detected too late, maintenance intervals are chosen too short and optimization potential for higher output and increased energy efficiency is not sufficiently used. A possibility to cope with these challenges is the development of self-learning assistance systems, which identify relevant relationships by observation of complex manufacturing processes so that failures, anomalies and need for optimization are automatically detected. The assistance system developed in the present work accomplishes data acquisition, process monitoring and anomaly detection in industrial and agricultural processes. The assistance system is evaluated in three application cases: Large distillation columns, agricultural harvesting processes and large-scale sorting plants. In this paper, the developed infrastructures for data acquisition in these application cases are described as well as the developed algorithms and initial evaluation results.

The Use of Intervention Mapping to Develop a Tailored Web-Based Intervention, Condom-HIM.

PubMed

Miranda, Joyal; Côté, José

2017-04-19

Many HIV (human immunodeficiency virus) prevention interventions are currently being implemented and evaluated, with little information published on their development. A framework highlighting the method of development of an intervention can be used by others wanting to replicate interventions or develop similar interventions to suit other contexts and settings. It provides researchers with a comprehensive development process of the intervention. The objective of this paper was to describe how a systematic approach, intervention mapping, was used to develop a tailored Web-based intervention to increase condom use among HIV-positive men who have sex with men. The intervention was developed in consultation with a multidisciplinary team composed of academic researchers, community members, Web designers, and the target population. Intervention mapping involved a systematic process of 6 steps: (1) needs assessment; (2) identification of proximal intervention objectives; (3) selection of theory-based intervention methods and practical strategies; (4) development of intervention components and materials; (5) adoption, implementation, and maintenance; and (6) evaluation planning. The application of intervention mapping resulted in the development of a tailored Web-based intervention for HIV-positive men who have sex with men, called Condom-HIM. Using intervention mapping as a systematic process to develop interventions is a feasible approach that specifically integrates the use of theory and empirical findings. Outlining the process used to develop a particular intervention provides clarification on the conceptual use of experimental interventions in addition to potentially identifying reasons for intervention failures. ©Joyal Miranda, José Côté. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 19.04.2017.

The Indispensable Roles of Microglia and Astrocytes during Brain Development

PubMed Central

Reemst, Kitty; Noctor, Stephen C.; Lucassen, Paul J.; Hol, Elly M.

2016-01-01

Glia are essential for brain functioning during development and in the adult brain. Here, we discuss the various roles of both microglia and astrocytes, and their interactions during brain development. Although both cells are fundamentally different in origin and function, they often affect the same developmental processes such as neuro-/gliogenesis, angiogenesis, axonal outgrowth, synaptogenesis and synaptic pruning. Due to their important instructive roles in these processes, dysfunction of microglia or astrocytes during brain development could contribute to neurodevelopmental disorders and potentially even late-onset neuropathology. A better understanding of the origin, differentiation process and developmental functions of microglia and astrocytes will help to fully appreciate their role both in the developing as well as in the adult brain, in health and disease. PMID:27877121

Development of Solvent Extraction Approach to Recycle Enriched Molybdenum Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tkac, Peter; Brown, M. Alex; Sen, Sujat

2016-06-01

Argonne National Laboratory, in cooperation with Oak Ridge National Laboratory and NorthStar Medical Technologies, LLC, is developing a recycling process for a solution containing valuable Mo-100 or Mo-98 enriched material. Previously, Argonne had developed a recycle process using a precipitation technique. However, this process is labor intensive and can lead to production of large volumes of highly corrosive waste. This report discusses an alternative process to recover enriched Mo in the form of ammonium heptamolybdate by using solvent extraction. Small-scale experiments determined the optimal conditions for effective extraction of high Mo concentrations. Methods were developed for removal of ammonium chloridemore » from the molybdenum product of the solvent extraction process. In large-scale experiments, very good purification from potassium and other elements was observed with very high recovery yields (~98%).« less

The GA sulfur-iodine water-splitting process - A status report

NASA Astrophysics Data System (ADS)

Besenbruch, G. E.; Chiger, H. D.; McCorkle, K. H.; Norman, J. H.; Rode, J. S.; Schuster, J. R.; Trester, P. W.

The development of a sulfur-iodine thermal water splitting cycle is described. The process features a 50% thermal efficiency, plus all liquid and gas handling. Basic chemical investigations comprised the development of multitemperature and multistage sulfuric acid boost reactors, defining the phase behavior of the HI/I2/H2O/H3PO4 mixtures, and development of a decomposition process for hydrogen iodide in the liquid phase. Initial process engineering studies have led to a 47% efficiency, improvements of 2% projected, followed by coupling high-temperature solar concentrators to the splitting processes to reduce power requirements. Conceptual flowsheets developed from bench models are provided; materials investigations have concentrated on candidates which can withstand corrosive mixtures at temperatures up to 400 deg K, with Hastelloy C-276 exhibiting the best properties for containment and heat exchange to I2.

Friction Stir Welding Development at NASA-Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.; Carter, Robert W.; Ding, Robert J.; Lawless, Kirby G.; Nunes, Arthur C., Jr.; Russell, Carolyn K.; Shah, Sandeep R.

2001-01-01

This paper presents an overview of friction stir welding (FSW) process development and applications at Marshall Space Flight Center (MSFC). FSW process development started as a laboratory curiosity but soon found support from many users. The FSW process advanced very quickly and has found many applications both within and outside the aerospace industry. It is currently being adapted for joining key elements of the Space Shuttle External Tank for improved producibility and reliability. FSW process modeling is done to better understand and improve the process. Special tools have been developed to weld variable thickness materials including thin and thick materials. FSW is now being applied to higher temperature materials such as copper and to advanced materials such as metal matrix composites. FSW technology is being successfully transferred from MSFC laboratory to shop floors of many commercial companies.

The GA sulfur-iodine water-splitting process - A status report

NASA Technical Reports Server (NTRS)

Besenbruch, G. E.; Chiger, H. D.; Mccorkle, K. H.; Norman, J. H.; Rode, J. S.; Schuster, J. R.; Trester, P. W.

1981-01-01

The development of a sulfur-iodine thermal water splitting cycle is described. The process features a 50% thermal efficiency, plus all liquid and gas handling. Basic chemical investigations comprised the development of multitemperature and multistage sulfuric acid boost reactors, defining the phase behavior of the HI/I2/H2O/H3PO4 mixtures, and development of a decomposition process for hydrogen iodide in the liquid phase. Initial process engineering studies have led to a 47% efficiency, improvements of 2% projected, followed by coupling high-temperature solar concentrators to the splitting processes to reduce power requirements. Conceptual flowsheets developed from bench models are provided; materials investigations have concentrated on candidates which can withstand corrosive mixtures at temperatures up to 400 deg K, with Hastelloy C-276 exhibiting the best properties for containment and heat exchange to I2.

Multiscale and Multiphysics Modeling of Additive Manufacturing of Advanced Materials

NASA Technical Reports Server (NTRS)

Liou, Frank; Newkirk, Joseph; Fan, Zhiqiang; Sparks, Todd; Chen, Xueyang; Fletcher, Kenneth; Zhang, Jingwei; Zhang, Yunlu; Kumar, Kannan Suresh; Karnati, Sreekar

2015-01-01

The objective of this proposed project is to research and develop a prediction tool for advanced additive manufacturing (AAM) processes for advanced materials and develop experimental methods to provide fundamental properties and establish validation data. Aircraft structures and engines demand materials that are stronger, useable at much higher temperatures, provide less acoustic transmission, and enable more aeroelastic tailoring than those currently used. Significant improvements in properties can only be achieved by processing the materials under nonequilibrium conditions, such as AAM processes. AAM processes encompass a class of processes that use a focused heat source to create a melt pool on a substrate. Examples include Electron Beam Freeform Fabrication and Direct Metal Deposition. These types of additive processes enable fabrication of parts directly from CAD drawings. To achieve the desired material properties and geometries of the final structure, assessing the impact of process parameters and predicting optimized conditions with numerical modeling as an effective prediction tool is necessary. The targets for the processing are multiple and at different spatial scales, and the physical phenomena associated occur in multiphysics and multiscale. In this project, the research work has been developed to model AAM processes in a multiscale and multiphysics approach. A macroscale model was developed to investigate the residual stresses and distortion in AAM processes. A sequentially coupled, thermomechanical, finite element model was developed and validated experimentally. The results showed the temperature distribution, residual stress, and deformation within the formed deposits and substrates. A mesoscale model was developed to include heat transfer, phase change with mushy zone, incompressible free surface flow, solute redistribution, and surface tension. Because of excessive computing time needed, a parallel computing approach was also tested. In addition, after investigating various methods, a Smoothed Particle Hydrodynamics Model (SPH Model) was developed to model wire feeding process. Its computational efficiency and simple architecture makes it more robust and flexible than other models. More research on material properties may be needed to realistically model the AAM processes. A microscale model was developed to investigate heterogeneous nucleation, dendritic grain growth, epitaxial growth of columnar grains, columnar-to-equiaxed transition, grain transport in melt, and other properties. The orientations of the columnar grains were almost perpendicular to the laser motion's direction. Compared to the similar studies in the literature, the multiple grain morphology modeling result is in the same order of magnitude as optical morphologies in the experiment. Experimental work was conducted to validate different models. An infrared camera was incorporated as a process monitoring and validating tool to identify the solidus and mushy zones during deposition. The images were successfully processed to identify these regions. This research project has investigated multiscale and multiphysics of the complex AAM processes thus leading to advanced understanding of these processes. The project has also developed several modeling tools and experimental validation tools that will be very critical in the future of AAM process qualification and certification.

Development of pulsed processes for the manufacture of solar cells

NASA Technical Reports Server (NTRS)

Minnucci, J. A.

1978-01-01

The results of a 1-year program to develop the processes required for low-energy ion implantation for the automated production of silicon solar cells are described. The program included: (1) demonstrating state-of-the-art ion implantation equipment and designing an automated ion implanter, (2) making efforts to improve the performance of ion-implanted solar cells to 16.5 percent AM1, (3) developing a model of the pulse annealing process used in solar cell production, and (4) preparing an economic analysis of the process costs of ion implantation.

Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moawad, Ayman; Kim, Namdoo; Rousseau, Aymeric

2016-06-01

The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

Development of a Rolling Process Design Tool for Use in Improving Hot Roll Slab Recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Couch, R; Becker, R; Rhee, M

2004-09-24

Lawrence Livermore National Laboratory participated in a U. S. Department of Energy/Office of Industrial Technology sponsored research project 'Development of a Rolling Process Design Tool for Use in Improving Hot Roll Slab Recovery', as a Cooperative Agreement TC-02028 with the Alcoa Technical Center (ATC). The objective of the joint project with Alcoa is to develop a numerical modeling capability to optimize the hot rolling process used to produce aluminum plate. Product lost in the rolling process and subsequent recycling, wastes resources consumed in the energy-intensive steps of remelting and reprocessing the ingot. The modeling capability developed by project partners willmore » be used to produce plate more efficiently and with reduced product loss.« less

Ecological Factors in Human Development.

PubMed

Cross, William E

2017-05-01

Urie Bronfenbrenner (1992) helped developmental psychologists comprehend and define "context" as a rich, thick multidimensional construct. His ecological systems theory consists of five layers, and within each layer are developmental processes unique to each layer. The four articles in this section limit the exploration of context to the three innermost systems: the individual plus micro- and macrolayers. Rather than examine both the physical features and processes, the articles tend to focus solely on processes associated with a niche. Processes explored include social identity development, social network dynamics, peer influences, and school-based friendship patterns. The works tend to extend the generalization of extant theory to the developmental experience of various minority group experiences. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Analyses of requirements for computer control and data processing experiment subsystems. Volume 1: ATM experiment S-056 image data processing system techniques development

NASA Technical Reports Server (NTRS)

1972-01-01

The solar imaging X-ray telescope experiment (designated the S-056 experiment) is described. It will photograph the sun in the far ultraviolet or soft X-ray region. Because of the imaging characteristics of this telescope and the necessity of using special techniques for capturing images on film at these wave lengths, methods were developed for computer processing of the photographs. The problems of image restoration were addressed to develop and test digital computer techniques for applying a deconvolution process to restore overall S-056 image quality. Additional techniques for reducing or eliminating the effects of noise and nonlinearity in S-056 photographs were developed.

Development of a commercial scale process for production of 1,4-butanediol from sugar.

PubMed

Burgard, Anthony; Burk, Mark J; Osterhout, Robin; Van Dien, Stephen; Yim, Harry

2016-12-01

A sustainable bioprocess for the production of 1,4-butanediol (BDO) from carbohydrate feedstocks was developed. BDO is a chemical intermediate that goes into a variety of products including automotive parts, electronics, and apparel, and is currently manufactured commercially through energy-intensive petrochemical processes using fossil raw materials. This review highlights the development of an Escherichia coli strain and an overall process that successfully performed at commercial scale for direct production of bio-BDO from dextrose. Achieving such high level performance required an integrated technology platform enabling detailed engineering of enzyme, pathway, metabolic network, and organism, as well as development of effective fermentation and downstream recovery processes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ecofriendly ethanol-developable processes for electron beam lithography using positive-tone dextrin resist material

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Sugino, Naoto; Hanabata, Makoto; Oshima, Akihiro; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi

2017-07-01

From the viewpoints of the utilization of agricultural resources and advanced use of biomass, this study is aimed at expanding the resolution limits of ecofriendly ethanol-developable processes for electron-beam lithography using a positive-tone dextrin resist material with high hydrophilicity on a cellulose-based underlayer. The images of 20-nm-hole and 40-nm-line patterns with an exposure dose of approximately 1800 µC/cm2 were provided by ecofriendly ethanol-developable processes instead of the common development processes using tetramethylammonium hydroxide and organic solvents. The CF4 etching selectivity of the positive-tone dextrin resist material was approximately 10% lower than that of the polymethyl methacrylate used as a reference resist material.

The development of mathematics courseware for learning line and angle

NASA Astrophysics Data System (ADS)

Halim, Noor Dayana Abd; Han, Ong Boon; Abdullah, Zaleha; Yusup, Junaidah

2015-05-01

Learning software is a teaching aid which is often used in schools to increase students' motivation, attract students' attention and also improve the quality of teaching and learning process. However, the development of learning software should be followed the phases in Instructional Design (ID) Model, therefore the process can be carried out systematic and orderly. Thus, this concept paper describes the application of ADDIE model in the development of mathematics learning courseware for learning Line and Angle named CBL-Math. ADDIE model consists of five consecutive phases which are Analysis, Design, Development, Implementation and Evaluation. Each phase must be properly planned in order to achieve the objectives stated. Other than to describe the processes occurring in each phase, this paper also demonstrating how cognitive theory of multimedia learning principles are integrated in the developed courseware. The principles that applied in the courseware reduce the students' cognitive load while learning the topic of line and angle. With well prepared development process and the integration of appropriate principles, it is expected that the developed software can help students learn effectively and also increase students' achievement in the topic of Line and Angle.

Optimization of a novel enzyme treatment process for early-stage processing of sheepskins.

PubMed

Lim, Y F; Bronlund, J E; Allsop, T F; Shilton, A N; Edmonds, R L

2010-01-01

An enzyme treatment process for early-stage processing of sheepskins has been previously reported by the Leather and Shoe Research Association of New Zealand (LASRA) as an alternative to current industry operations. The newly developed process had marked benefits over conventional processing in terms of a lowered energy usage (73%), processing time (47%) as well as water use (49%), but had been developed as a "proof of principle''. The objective of this work was to develop the process further to a stage ready for adoption by industry. Mass balancing was used to investigate potential modifications for the process based on the understanding developed from a detailed analysis of preliminary design trials. Results showed that a configuration utilising a 2 stage counter-current system for the washing stages and segregation and recycling of enzyme float prior to dilution in the neutralization stage was a significant improvement. Benefits over conventional processing include a reduction of residual TDS by 50% at the washing stages and 70% savings on water use overall. Benefits over the un-optimized LASRA process are reduction of solids in product after enzyme treatment and neutralization stages by 30%, additional water savings of 21%, as well as 10% savings of enzyme usage.

[Thinking of study on secondary development of major traditional Chinese medicine varieties based on system theory].

PubMed

Cheng, Xu-Dong; Jia, Xiao-Bin; Feng, Liang; Jiang, Jun

2013-12-01

The secondary development of traditional Chinese medicines (TCMs) is an important content of TCM modernization process, as well as an important path for developing new TCM drugs. Under the guidance of the system theory, in response to the lack of the overall guideline and practical methods for the secondary development of TCMs at present, we introduced the overall thought of the secondary development of major TCM varieties, as well as the roles and contents of clinical research, pharmacology and pharmaceutics in the process of the secondary development of major TCM varieties, so as to provide systematic strategies and methods for the development of major TCM varieties.

The Hyperspectral Imager for the Coastal Ocean (HICO): Sensor and Data Processing Overview

DTIC Science & Technology

2010-01-20

backscattering coefficients, and others. Several of these software modules will be developed within the Automated Processing System (APS), a data... Automated Processing System (APS) NRL developed APS, which processes satellite data into ocean color data products. APS is a collection of methods...used for ocean color processing which provide the tools for the automated processing of satellite imagery [1]. These tools are in the process of

Application of high-throughput mini-bioreactor system for systematic scale-down modeling, process characterization, and control strategy development.

PubMed

Janakiraman, Vijay; Kwiatkowski, Chris; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2015-01-01

High-throughput systems and processes have typically been targeted for process development and optimization in the bioprocessing industry. For process characterization, bench scale bioreactors have been the system of choice. Due to the need for performing different process conditions for multiple process parameters, the process characterization studies typically span several months and are considered time and resource intensive. In this study, we have shown the application of a high-throughput mini-bioreactor system viz. the Advanced Microscale Bioreactor (ambr15(TM) ), to perform process characterization in less than a month and develop an input control strategy. As a pre-requisite to process characterization, a scale-down model was first developed in the ambr system (15 mL) using statistical multivariate analysis techniques that showed comparability with both manufacturing scale (15,000 L) and bench scale (5 L). Volumetric sparge rates were matched between ambr and manufacturing scale, and the ambr process matched the pCO2 profiles as well as several other process and product quality parameters. The scale-down model was used to perform the process characterization DoE study and product quality results were generated. Upon comparison with DoE data from the bench scale bioreactors, similar effects of process parameters on process yield and product quality were identified between the two systems. We used the ambr data for setting action limits for the critical controlled parameters (CCPs), which were comparable to those from bench scale bioreactor data. In other words, the current work shows that the ambr15(TM) system is capable of replacing the bench scale bioreactor system for routine process development and process characterization. © 2015 American Institute of Chemical Engineers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zitney, S.E.; McCorkle, D.; Yang, C.

Process modeling and simulation tools are widely used for the design and operation of advanced power generation systems. These tools enable engineers to solve the critical process systems engineering problems that arise throughout the lifecycle of a power plant, such as designing a new process, troubleshooting a process unit or optimizing operations of the full process. To analyze the impact of complex thermal and fluid flow phenomena on overall power plant performance, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has developed the Advanced Process Engineering Co-Simulator (APECS). The APECS system is an integrated software suite that combinesmore » process simulation (e.g., Aspen Plus) and high-fidelity equipment simulations such as those based on computational fluid dynamics (CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper we discuss the initial phases of the integration of the APECS system with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite uses the ActiveX (OLE Automation) controls in the Aspen Plus process simulator wrapped by the CASI library developed by Reaction Engineering International to run process/CFD co-simulations and query for results. This integration represents a necessary step in the development of virtual power plant co-simulations that will ultimately reduce the time, cost, and technical risk of developing advanced power generation systems.« less

Advanced technology development for image gathering, coding, and processing

NASA Technical Reports Server (NTRS)

Huck, Friedrich O.

1990-01-01

Three overlapping areas of research activities are presented: (1) Information theory and optimal filtering are extended to visual information acquisition and processing. The goal is to provide a comprehensive methodology for quantitatively assessing the end-to-end performance of image gathering, coding, and processing. (2) Focal-plane processing techniques and technology are developed to combine effectively image gathering with coding. The emphasis is on low-level vision processing akin to the retinal processing in human vision. (3) A breadboard adaptive image-coding system is being assembled. This system will be used to develop and evaluate a number of advanced image-coding technologies and techniques as well as research the concept of adaptive image coding.

Impact of agile methodologies on team capacity in automotive radio-navigation projects

NASA Astrophysics Data System (ADS)

Prostean, G.; Hutanu, A.; Volker, S.

2017-01-01

The development processes used in automotive radio-navigation projects are constantly under adaption pressure. While the software development models are based on automotive production processes, the integration of peripheral components into an automotive system will trigger a high number of requirement modifications. The use of traditional development models in automotive industry will bring team’s development capacity to its boundaries. The root cause lays in the inflexibility of actual processes and their adaption limits. This paper addresses a new project management approach for the development of radio-navigation projects. The understanding of weaknesses of current used models helped us in development and integration of agile methodologies in traditional development model structure. In the first part we focus on the change management methods to reduce request for change inflow. Established change management risk analysis processes enables the project management to judge the impact of a requirement change and also gives time to the project to implement some changes. However, in big automotive radio-navigation projects the saved time is not enough to implement the large amount of changes, which are submitted to the project. In the second phase of this paper we focus on increasing team capacity by integrating at critical project phases agile methodologies into the used traditional model. The overall objective of this paper is to prove the need of process adaption in order to solve project team capacity bottlenecks.

Participatory health development in rural Nepal: clarifying the process of community empowerment.

PubMed

Purdey, A F; Adhikari, G B; Robinson, S A; Cox, P W

1994-01-01

Community-based participatory development empowers villagers to develop community cohesion and confidence, increase their ability to identify, analyze, and priorize their own needs, and organize the resources to meet these needs. An important first step in the process involves establishing a cohesive and functional community group. The authors believe that this is best accomplished through villagers' critical examination of their experiences with development including their understanding of reasons for success or failure, and the gradual emergence of a model of working together that acknowledges and builds on participation and collective expertise. This approach to development is demonstrating encouraging results in a rural area of western Nepal in a university affiliated Canadian/Nepali Health Development Project. This paper describes two mini-projects to illustrate the evolution of group formation through reflection, analysis, and action, and identifies outcomes that could serve as indicators of community empowerment. The paper also presents a generic model of empowerment, and offers lessons learned by the project through the application of the empowerment process to sustainable health development.

STAR Algorithm Integration Team - Facilitating operational algorithm development

NASA Astrophysics Data System (ADS)

Mikles, V. J.

2015-12-01

The NOAA/NESDIS Center for Satellite Research and Applications (STAR) provides technical support of the Joint Polar Satellite System (JPSS) algorithm development and integration tasks. Utilizing data from the S-NPP satellite, JPSS generates over thirty Environmental Data Records (EDRs) and Intermediate Products (IPs) spanning atmospheric, ocean, cryosphere, and land weather disciplines. The Algorithm Integration Team (AIT) brings technical expertise and support to product algorithms, specifically in testing and validating science algorithms in a pre-operational environment. The AIT verifies that new and updated algorithms function in the development environment, enforces established software development standards, and ensures that delivered packages are functional and complete. AIT facilitates the development of new JPSS-1 algorithms by implementing a review approach based on the Enterprise Product Lifecycle (EPL) process. Building on relationships established during the S-NPP algorithm development process and coordinating directly with science algorithm developers, the AIT has implemented structured reviews with self-contained document suites. The process has supported algorithm improvements for products such as ozone, active fire, vegetation index, and temperature and moisture profiles.

Radar target classification studies: Software development and documentation

NASA Astrophysics Data System (ADS)

Kamis, A.; Garber, F.; Walton, E.

1985-09-01

Three computer programs were developed to process and analyze calibrated radar returns. The first program, called DATABASE, was developed to create and manage a random accessed data base. The second program, called FTRAN DB, was developed to process horizontal and vertical polarizations radar returns into different formats (i.e., time domain, circular polarizations and polarization parameters). The third program, called RSSE, was developed to simulate a variety of radar systems and to evaluate their ability to identify radar returns. Complete computer listings are included in the appendix volumes.

Inequality, poverty and development.

PubMed

Ahluwalia, M S

1976-12-01

Dicussion explores the nature of the relationship between the distribution of income and the process of development on the basis of cross country data on income inequality. The results presented are based on a sample of 60 countries, including 40 developing countries, 14 developed countries, and 6 socialist countries. The approach adopted is essentially exploratory. Multivariate regression analysis was used to estimate cross country relationships between the income shares of different percentile groups and selected variables reflecting aspects of the development process which are likely to influence income inequality. The estimated equations are then used as a basis for broad generalizations about the relationship between income distribution and development. There was strong support for the proposition that relative inequaltiy increases substantially in the early stages of development, with a reversal of this tendency in the later stages. The propositions held whether the sample was restricted to developing countries or expanded to include developed and socialist countries. The process was most prolonged for the poorest group. There were a number of processes occurring "pari passu" with development which were correlated with income inequality and which can plausibly be interpreted as causal. These were intersectoral shifts in the structure of production, expansion in education attainment and skill level of the labor force; and reduction in the growth of population. The operation of these processes appeared to explain some of the improvement in income distribution observed in the later stages of development, but they did not serve to explain the marked deterioration observed in the earlier stages. The cross section results failed to support the stronger hypothesis that the deterioration in relative inequality reflected a prolonged absolute impoverishment of large sections of the population in the course of development. The cross country pattern showed average absolute incomes of the lower percentile groups rising as per capita gross national product rises, although slower than for upper income groups. The cross section results failed to support the view that a faster rate of growth is systematically associated with higher inequality than can be expected given the state of development realized. An appendix identifies data sources and problems.

Fidelity of test development process within a national science grant

NASA Astrophysics Data System (ADS)

Brumfield, Teresa E.

In 2002, a math-science partnership (MSP) program was initiated by a national science grant. The purpose of the MSP program was to promote the development, implementation, and sustainability of promising partnerships among institutions of higher education, K-12 schools and school systems, as well as other important stakeholders. One of the funded projects included a teacher-scientist collaborative that instituted a professional development system to prepare teachers to use inquiry-based instructional modules. The MSP program mandated evaluations of its funded projects. One of the teacher-scientist collaborative project's outcomes specifically focused on teacher and student science content and process skills. In order to provide annual evidence of progress and to measure the impact of the project's efforts, and because no appropriate science tests were available to measure improvements in content knowledge of participating teachers and their students, the project contracted for the development of science tests. This dissertation focused on the process of test development within an evaluation and examined planned (i.e., expected) and actual (i.e., observed) test development, specifically concentrating on the factors that affected the actual test development process. Planned test development was defined as the process of creating tests according to the well-established test development procedures recommended by the AERA/APA/NCME 1999 Standards for Educational and Psychological Testing. Actual test development was defined as the process of creating tests as it actually took place. Because case study provides an in-depth, longitudinal examination of an event (i.e., case) in a naturalistic setting, it was selected as the appropriate methodology to examine the difference between planned and actual test development. The case (or unit of analysis) was the test development task, a task that was bounded by the context in which it occurred---and over which this researcher had no control---and by time. The purpose for studying the case was to gain a more in-depth, holistic understanding of the real-life test development task that took place within a project evaluation context. In particular, this case study investigated how the actual test development process was affected by: (1) the national and state (i.e., NC) science standards, (2) the NSF's definition of "evidence" in a project evaluation, (3) the MSP project's understanding of the role of the to-be-developed tests in their project evaluation, (4) the MSP project's understanding of the test development process, and (5) the MSP project's participants (e.g., teacher item-writers and scientists). From an investigation of this case, it was concluded that: (a) constructing psychometrically sound tests within an evaluation is not easy, (b) sufficient time and resources to construct such measures properly are seldom provided, and (c) test construction---at least within an evaluation---is not routine and unproblematic. Based upon the results from this case study, it was recommended that stakeholders (i.e., program managers, project directors, and evaluators) be familiar with the steps and standards used to develop psychometrically sound tests. Additionally, it was recommended that, for future research, a meta-analysis that examines only the test development process be conducted of all other MSP projects. A second suggested future research area was to establish a protocol that provides a systematic means by which to examine an existing or proposed MSP project for alignment with state science standards. Such a protocol would be cost-effective in that demonstrated alignment with state science standards would enable projects to use existing state science assessments, which must be in place, according to NCLB, by the 2007-2008 school year, to demonstrate student achievement. In this way, project directors and evaluators, typically with limited familiarity with the steps and standards by which psychometrically sound assessments are created, would not be placed in the role of test developer.

Analytical method for promoting process capability of shock absorption steel.

PubMed

Sung, Wen-Pei; Shih, Ming-Hsiang; Chen, Kuen-Suan

2003-01-01

Mechanical properties and low cycle fatigue are two factors that must be considered in developing new type steel for shock absorption. Process capability and process control are significant factors in achieving the purpose of research and development programs. Often-used evaluation methods failed to measure process yield and process centering; so this paper uses Taguchi loss function as basis to establish an evaluation method and the steps for assessing the quality of mechanical properties and process control of an iron and steel manufacturer. The establishment of this method can serve the research and development and manufacturing industry and lay a foundation in enhancing its process control ability to select better manufacturing processes that are more reliable than decision making by using the other commonly used methods.

Coal liquefaction processes and development requirements analysis for synthetic fuels production

NASA Technical Reports Server (NTRS)

1980-01-01

Focus of the study is on: (1) developing a technical and programmatic data base on direct and indirect liquefaction processes which have potential for commercialization during the 1980's and beyond, and (2) performing analyses to assess technology readiness and development trends, development requirements, commercial plant costs, and projected synthetic fuel costs. Numerous data sources and references were used as the basis for the analysis results and information presented.

Developing family planning nurse practitioner protocols.

PubMed

Hawkins, J W; Roberto, D

1984-01-01

This article focuses on the process of development of protocols for family planning nurse practitioners. A rationale for the use of protocols, a definition of the types and examples, and the pros and cons of practice with protocols are presented. A how-to description for the development process follows, including methods and a suggested tool for critique and evaluation. The aim of the article is to assist nurse practitioners in developing protocols for their practice.

Developing questionnaires for educational research: AMEE Guide No. 87

PubMed Central

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Developing questionnaires for educational research: AMEE Guide No. 87.

PubMed

Artino, Anthony R; La Rochelle, Jeffrey S; Dezee, Kent J; Gehlbach, Hunter

2014-06-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure.

Low-cost solar array project progress and plans

NASA Technical Reports Server (NTRS)

Callaghan, W. T.

1981-01-01

The considered project is part of the DOE Photovoltaic Technology and Market Development Program. This program is concerned with the development and the utilization of cost-competitive photovoltaic systems. The project has the objective to develop, by 1986, the national capability to manufacture low-cost, long-life photovoltaic arrays at production rates that will realize economies of scale, and at a price of less than $0.70/watt. The array performance objectives include an efficiency greater than 10% and an operating lifetime longer than 20 years. The objective of the silicon material task is to establish the practicality of processes for producing silicon suitable for terrestrial photovoltaic applications at a price of $14/kg. The large-area sheet task is concerned with the development of process technology for sheet formation. Low-cost encapsulation material systems are being developed in connection with the encapsulation task. Another project goal is related to the development of economical process sequences.

Second International Conference on Accelerating Biopharmaceutical Development: March 9-12, 2009, Coronado, CA USA.

PubMed

Reichert, Janice M; Jacob, Nitya; Amanullah, Ashraf

2009-01-01

The Second International Conference on Accelerating Biopharmaceutical Development was held in Coronado, California. The meeting was organized by the Society for Biological Engineering (SBE) and the American Institute of Chemical Engineers (AIChE); SBE is a technological community of the AIChE. Bob Adamson (Wyeth) and Chuck Goochee (Centocor) were co-chairs of the event, which had the theme "Delivering cost-effective, robust processes and methods quickly and efficiently." The first day focused on emerging disruptive technologies and cutting-edge analytical techniques. Day two featured presentations on accelerated cell culture process development, critical quality attributes, specifications and comparability, and high throughput protein formulation development. The final day was dedicated to discussion of technology options and new analysis methods provided by emerging disruptive technologies; functional interaction, integration and synergy in platform development; and rapid and economic purification process development.

Second International Conference on Accelerating Biopharmaceutical Development: March 9-12, 2009, Coronado, CA, USA.

PubMed

Reichert, Janice M; Jacob, Nitya M; Amanullah, Ashraf

2009-01-01

The Second International Conference on Accelerating Biopharmaceutical Development was held in Coronado, California. The meeting was organized by the Society for Biological Engineering (SBE) and the American Institute of Chemical Engineers (AIChE); SBE is a technological community of the AIChE. Bob Adamson (Wyeth) and Chuck Goochee (Centocor) were co-chairs of the event, which had the theme "Delivering cost-effective, robust processes and methods quickly and efficiently." The first day focused on emerging disruptive technologies and cutting-edge analytical techniques. Day two featured presentations on accelerated cell culture process development, critical quality attributes, specifications and comparability, and high throughput protein formulation development. The final day was dedicated to discussion of technology options and new analysis methods provided by emerging disruptive technologies; functional interaction, integration and synergy in platform development; and rapid and economic purification process development.

A strategy to improve priority setting in developing countries.

PubMed

Kapiriri, Lydia; Martin, Douglas K

2007-09-01

Because the demand for health services outstrips the available resources, priority setting is one of the most difficult issues faced by health policy makers, particularly those in developing countries. Priority setting in developing countries is fraught with uncertainty due to lack of credible information, weak priority setting institutions, and unclear priority setting processes. Efforts to improve priority setting in these contexts have focused on providing information and tools. In this paper we argue that priority setting is a value laden and political process, and although important, the available information and tools are not sufficient to address the priority setting challenges in developing countries. Additional complementary efforts are required. Hence, a strategy to improve priority setting in developing countries should also include: (i) capturing current priority setting practices, (ii) improving the legitimacy and capacity of institutions that set priorities, and (iii) developing fair priority setting processes.

Using evaluation methods to guide the development of a tobacco-use prevention curriculum for youth: a case study.

PubMed

Bridge, P D; Gallagher, R E; Berry-Bobovski, L C

2000-01-01

Fundamental to the development of educational programs and curricula is the evaluation of processes and outcomes. Unfortunately, many otherwise well-designed programs do not incorporate stringent evaluation methods and are limited in measuring program development and effectiveness. Using an advertising lesson in a school-based tobacco-use prevention curriculum as a case study, the authors examine the role of evaluation in the development, implementation, and enhancement of the curricular lesson. A four-phase formative and summative evaluation design was developed to divide the program-evaluation continuum into a structured process that would aid in the management of the evaluation, as well as assess curricular components. Formative and summative evaluation can provide important guidance in the development, implementation, and enhancement of educational curricula. Evaluation strategies identified unexpected barriers and allowed the project team to make necessary "time-relevant" curricular adjustments during each stage of the process.

A Structural and Functional Model of Teachers' Monitoring Skills Development

ERIC Educational Resources Information Center

Masalimova, Alfiya R.; Barinova, Nataliya A.

2016-01-01

The relevance of the present issue is caused by a strong need to conduct monitoring processes in all types of teaching processes and a poor development of theoretical, content and technological, scientific and methodological material for teachers' monitoring skills development during their teaching practice. The aim of the article is to create and…

Applying the Mixed Methods Instrument Development and Construct Validation Process: the Transformative Experience Questionnaire

ERIC Educational Resources Information Center

Koskey, Kristin L. K.; Sondergeld, Toni A.; Stewart, Victoria C.; Pugh, Kevin J.

2018-01-01

Onwuegbuzie and colleagues proposed the Instrument Development and Construct Validation (IDCV) process as a mixed methods framework for creating and validating measures. Examples applying IDCV are lacking. We provide an illustrative case integrating the Rasch model and cognitive interviews applied to the development of the Transformative…

Student Team Projects in Information Systems Development: Measuring Collective Creative Efficacy

ERIC Educational Resources Information Center

Cheng, Hsiu-Hua; Yang, Heng-Li

2011-01-01

For information systems development project student teams, learning how to improve software development processes is an important training. Software process improvement is an outcome of a number of creative behaviours. Social cognitive theory states that the efficacy of judgment influences behaviours. This study explores the impact of three types…

The Process of Curriculum Development and the Use of Assessments in Independent Schools

ERIC Educational Resources Information Center

Young, JoAnn P.

2012-01-01

This qualitative study was designed to examine and identify the site-based process that two elementary, independent schools, accredited by the Southern Association of Independent Schools use for curriculum and instructional development. Also, the study examined and identified the development and use of assessments to support each school's…

Teaching Assistant Development through a Fresh Lens: A Self-Determination Framework

ERIC Educational Resources Information Center

Hardre, Patricia L.

2013-01-01

Self-determination Theory (SDT) presents critical constructs and processes for understanding and improving human learning and development. Though actively utilized as a theoretical framework for K-12 and adult training research, it has been virtually ignored in TA professional development design and research. Self-determination and the process of…

Cognitive Predictors of Language Development in Children with Specific Language Impairment (SLI)

ERIC Educational Resources Information Center

van Daal, John; Verhoeven, Ludo; van Balkom, Hans

2009-01-01

Background: Language development is generally viewed as a multifactorial process. There are increasing indications that this similarly holds for the problematic language development process. Aims: A population of 97 young Dutch children with specific language impairment (SLI) was followed over a 2-year period to provide additional evidence for the…

Cognitive Process of Development in Children

ERIC Educational Resources Information Center

Boddington, Eulalee N.

2009-01-01

In this article we explored the theories of Arnold Gesell, Erik Erickson and Jean Piaget about how human beings development. In this component we will analyze the cognitive processes of how children perceive and develop, in particular children from a cross-cultural background. How learning takes place, and how the influences of culture, and…

Theories of Human Development that Enhance an Understanding of the College Transition Process

ERIC Educational Resources Information Center

Guiffrida, Douglas A.

2009-01-01

Background/Context: Although theories of human development often play a central role in K-12 pedagogical practices, evidence suggests that developmental theories have not been used extensively to understand the college transition process or to develop programs to support students during these transitions. Purpose/Objective/Research Question/Focus…

Culturally Based Intervention Development: The Case of Latino Families Dealing with Schizophrenia

ERIC Educational Resources Information Center

Barrio, Concepcion; Yamada, Ann-Marie

2010-01-01

Objectives: This article describes the process of developing a culturally based family intervention for Spanish-speaking Latino families with a relative diagnosed with schizophrenia. Method: Our iterative intervention development process was guided by a cultural exchange framework and based on findings from an ethnographic study. We piloted this…

Advances in Early Memory Development Research: Insights about the Dark Side of the Moon

ERIC Educational Resources Information Center

Courage, Mary L.; Howe, Mark L.

2004-01-01

Over the past three decades impressive progress has been made in documenting the development of encoding, storage, and retrieval processes in preverbal infants and children. This literature includes an extensive and diverse database as well as theoretical conjecture about the underlying processes that drive early memory development. A selective…

An Analytic Hierarchy Process for School Quality and Inspection: Model Development and Application

ERIC Educational Resources Information Center

Al Qubaisi, Amal; Badri, Masood; Mohaidat, Jihad; Al Dhaheri, Hamad; Yang, Guang; Al Rashedi, Asma; Greer, Kenneth

2016-01-01

Purpose: The purpose of this paper is to develop an analytic hierarchy planning-based framework to establish criteria weights and to develop a school performance system commonly called school inspections. Design/methodology/approach: The analytic hierarchy process (AHP) model uses pairwise comparisons and a measurement scale to generate the…

Intellectual, Psychosocial, and Moral Development in College: Four Major Theories. Revised.

ERIC Educational Resources Information Center

Kurfiss, Joanne

Four models are discussed with which to view students, educational goals, and learning environments. Each of the four theories emphasizes a unique aspect of the total development process. Piaget's model describes the development of structures and processes which characterize mature logical thinking. Perry provides a closer look at students'…

Multimedia Design and Development: Who, What, When, Where, How, and Why.

ERIC Educational Resources Information Center

Fox, Michael T.

An important use of multimedia as a learning tool in academia is the process of designing and developing a multimedia project. The design and development process empowers students to explore, discuss, evaluate, and articulate their knowledge in a richer medium. A journalistic approach to examining the virtues, limitations, and components of the…

Responding to climate change in national forests: a guidebook for developing adaptation options

Treesearch

David L. Peterson; Connie I. Millar; Linda A. Joyce; Michael J. Furniss; Jessica E. Halofsky; Ronald P. Neilson; Toni Lyn Morelli

2011-01-01

This guidebook contains science-based principles, processes, and tools necessary to assist with developing adaptation options for national forest lands. The adaptation process is based on partnerships between local resource managers and scientists who work collaboratively to understand potential climate change effects, identify important resource issues, and develop...

An Academic Development Model for Fostering Innovation and Sharing in Curriculum Design

ERIC Educational Resources Information Center

Dempster, Jacqueline A.; Benfield, Greg; Francis, Richard

2012-01-01

This paper outlines an academic development process based around a two- or three-day workshop programme called a Course Design Intensive (CDI). The CDI process aims to foster collaboration and peer support in curriculum development and bring about pedagogic innovation and positive experiences for both tutors and learners. Bringing participants…

Developing a Competency-Based Curriculum for a Dental Hygiene Program.

ERIC Educational Resources Information Center

DeWald, Janice P.; McCann, Ann L.

1999-01-01

Describes the three-step process used to develop a competency-based curriculum at the Caruth School of Dental Hygiene (Texas A&M University). The process involved development of a competency document (detailing three domains, nine major competencies, and 54 supporting competencies), an evaluation plan, and a curriculum inventory which defined…

Understanding Support Workers' Competence Development in Working with Parents with Intellectual Disability

ERIC Educational Resources Information Center

Mc Hugh, Elaine; Starke, Mikaela

2015-01-01

Training for support workers who work with parents with intellectual disability can be aided by understanding how they perceive the training process and their competence development. This study explored the perceptions of competence development and the training process in Swedish support workers trained in the evidence-informed programme…

Development and Validation of the Evidence-Based Practice Process Assessment Scale: Preliminary Findings

ERIC Educational Resources Information Center

Rubin, Allen; Parrish, Danielle E.

2010-01-01

Objective: This report describes the development and preliminary findings regarding the reliability, validity, and sensitivity of a scale that has been developed to assess practitioners' perceived familiarity with, attitudes about, and implementation of the phases of the evidence-based practice (EBP) process. Method: After a panel of national…

A Bilingual Program and Its Staff Development Described: Before and after Title VII.

ERIC Educational Resources Information Center

Sandorff, Paul; And Others

This study was originally undertaken to describe an elementary school's bilingual education program and examine the process and effects of bilingual teacher development efforts, but it refocused on program change due to reduction in federal funding. A literature review explores materials relating to the process of change, staff development and…

Development of Entry-Level Competence Tests: A Strategy for Evaluation of Vocational Education Training Systems

ERIC Educational Resources Information Center

Schutte, Marc; Spottl, Georg

2011-01-01

Developing countries such as Malaysia and Oman have recently established occupational standards based on core work processes (functional clusters of work objects, activities and performance requirements), to which competencies (performance determinants) can be linked. While the development of work-process-based occupational standards is supposed…

The Process of Professional School Counselor Multicultural Competency Development: A Grounded Theory

ERIC Educational Resources Information Center

Berry, Jessica L.

2013-01-01

Professional School Counselors who work in schools with a range of student diversity are posed with a unique set of challenges which require them to develop their multicultural competencies. The following qualitative study examined the process of developing multicultural competence for four professional school counselors. The four professional…

Analysis of the Technical Writing Profession through the DACUM Process.

ERIC Educational Resources Information Center

Nolan, Timothy; Green, Marc

To help develop a curriculum program for technical writers, Cincinnati Technical College used the Developing a Curriculum (DACUM) method to produce a technical writing skills profile. DACUM develops an occupation analysis through a modified brainstorming process by a panel of expert workers under the direction of a qualified coordinator. This…

Leading Our World Forward: An Examination of Student Leadership Development

ERIC Educational Resources Information Center

Grunwell, Stewart G.

2015-01-01

This study seeks to examine the processes through which leadership is fostered and developed within student leadership development programs. While there has been some scholarly literature written in this area, a dearth in the literature exists with respect to providing a detailed chronicle and examination of the complete processes employed within…

A Guide for Monitoring District Implementation of Educator Evaluation Systems. REL 2015-069

ERIC Educational Resources Information Center

Cherasaro, Trudy; Yanoski, David; Swackhamer, Lyn

2015-01-01

This guide was developed to provide guidance to states or districts wishing to monitor implementation of educator evaluation systems. It describes a three-step process: develop state guidelines for educator evaluation systems; develop data collection methods; and determine adherence criteria and review data against criteria. The process was…

Development of a High-Content Image Analysis Method for Quantifying Synaptic Contacts in Rodent Primary Neuronal Cultures

EPA Science Inventory

Development of the nervous system occurs through a series of critical processes, each of which may be sensitive to disruption by environmental contaminants. In vitro culture of neurons can be used to model these processes and evaluate the potential of chemicals to act as develop...

[An increase in efficiency of adaptations and a weakening of organism protective reactions in the process of biological evolution].

PubMed

Ivanov, K P

2014-01-01

The main direction of evolution of living organisms is development of the central nervous system and sense organ, an increase of energy exchange development of homoiothermia, development of the more and more complex forms of behavior, an increase in energy expenditure in connection with an increase of the organism activity, and development of adaptation to the habitat. Such fundamental processes were subjected and have been subjected to numerous studies and discussions. However, in different animals there exist different species peculiarities of evolution of physiological functions, from which finally formed are fundamental evolutionary processes. We studied some of these specific processes by dividing them into two categories. The first category is "Increase of efficiency of adaptation" in development of biological evolution. By this term we mean development of amazing by perfection specific physiological mechanisms of adaptive character. The second category is "Weakening of protective organism reactions". By this we understand disturbance of protective mechanisms of the organism immune system, discoordination of movement of leukocytes along microvessels, the absence of efficient collateral circulation in brain and in heart, etc.

Technology Estimating 2: A Process to Determine the Cost and Schedule of Space Technology Research and Development

NASA Technical Reports Server (NTRS)

Cole, Stuart K.; Wallace, Jon; Schaffer, Mark; May, M. Scott; Greenberg, Marc W.

2014-01-01

As a leader in space technology research and development, NASA is continuing in the development of the Technology Estimating process, initiated in 2012, for estimating the cost and schedule of low maturity technology research and development, where the Technology Readiness Level is less than TRL 6. NASA' s Technology Roadmap areas consist of 14 technology areas. The focus of this continuing Technology Estimating effort included four Technology Areas (TA): TA3 Space Power and Energy Storage, TA4 Robotics, TA8 Instruments, and TA12 Materials, to confine the research to the most abundant data pool. This research report continues the development of technology estimating efforts completed during 2013-2014, and addresses the refinement of parameters selected and recommended for use in the estimating process, where the parameters developed are applicable to Cost Estimating Relationships (CERs) used in the parametric cost estimating analysis. This research addresses the architecture for administration of the Technology Cost and Scheduling Estimating tool, the parameters suggested for computer software adjunct to any technology area, and the identification of gaps in the Technology Estimating process.

OSPREY Model Development Status Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veronica J Rutledge

2014-04-01

During the processing of used nuclear fuel, volatile radionuclides will be discharged to the atmosphere if no recovery processes are in place to limit their release. The volatile radionuclides of concern are 3H, 14C, 85Kr, and 129I. Methods are being developed, via adsorption and absorption unit operations, to capture these radionuclides. It is necessary to model these unit operations to aid in the evaluation of technologies and in the future development of an advanced used nuclear fuel processing plant. A collaboration between Fuel Cycle Research and Development Offgas Sigma Team member INL and a NEUP grant including ORNL, Syracuse University,more » and Georgia Institute of Technology has been formed to develop off gas models and support off gas research. Georgia Institute of Technology is developing fundamental level model to describe the equilibrium and kinetics of the adsorption process, which are to be integrated with OSPREY. This report discusses the progress made on expanding OSPREY to be multiple component and the integration of macroscale and microscale level models. Also included in this report is a brief OSPREY user guide.« less

Aerospace Engineering Systems

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

1999-01-01

Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: Physics-based analysis tools for filling the design space database; Distributed computational resources to reduce response time and cost; Web-based technologies to relieve machine-dependence; and Artificial intelligence technologies to accelerate processes and reduce process variability. Activities such as the Advanced Design Technologies Testbed (ADTT) project at NASA Ames Research Center study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities will be reported.

Air Deployable Underwater Glider and Buoy Development for Arctic and Oceanographic Sensing

NASA Astrophysics Data System (ADS)

Legnos, P. J.

2013-12-01

LBI developed under a NOAA SBIR the AXIB (Airborne eXpendable Ice Buoy). The initial buoy was developed to collect barometric pressure, air temperature two meters above the surface and sea surface or ice temperature. A number of these AXIBs have been successfully deployed in the Arctic and Antarctic. Currently we are in the process of integrating additional sensors to include an anemometer, thermistor chain and hydrophones. Further development is in process for the integration of solar and wind recharging systems and lower power sensors and processing LBI developed under an ONR SBIR Grant two Air Deployable Underwater Gliders. They are primarily designed for air deployment from Navy P-3 or P-8 Aircraft though easily deployed from other aircraft or helicopters. The A-size (4 7/8'dia. X 36' long) and the 12 ¾ (12 ¾' dia. X 9' 9' long). On the development side we are in the process of integrating sensors and enhancing the battery storage capacity. We anticipate a broad range of Oceanographic sensing missions for these Gliders.

HARM processing techniques for MEMS and MOEMS devices using bonded SOI substrates and DRIE

NASA Astrophysics Data System (ADS)

Gormley, Colin; Boyle, Anne; Srigengan, Viji; Blackstone, Scott C.

2000-08-01

Silicon-on-Insulator (SOI) MEMS devices (1) are rapidly gaining popularity in realizing numerous solutions for MEMS, especially in the optical and inertia application fields. BCO recently developed a DRIE trench etch, utilizing the Bosch process, and refill process for high voltage dielectric isolation integrated circuits on thick SOI substrates. In this paper we present our most recently developed DRIE processes for MEMS and MOEMS devices. These advanced etch techniques are initially described and their integration with silicon bonding demonstrated. This has enabled process flows that are currently being utilized to develop optical router and filter products for fiber optics telecommunications and high precision accelerometers.

Professional Development Priorities Process (Needs Assessment). Leader's Handbook.

ERIC Educational Resources Information Center

Southeast Idaho Teacher Center Consortium, Twin Falls.

Step-by-step instructions are provided for implementing the Professional Development Priorities Process (PDPP), an educational needs assessment process, by a school faculty member with groups of eight peers or more. The essence of PDPP, which was designed at the Southeast Idaho Teacher Center Consortium, is a dynamic group process in which needs…

Challenges of Engaging Local Stakeholders for Statewide Program Development Process

ERIC Educational Resources Information Center

Martin, Michael J.; Leuci, Mary; Stewart, Mark

2014-01-01

The University of Missouri Extension needed to develop an annual program review process that collaboratively engaged county-level stakeholders. The results from the first 2 years highlight the results, challenges, and implications of the design process. The annual review process needs to be adaptive, responsive, and reflective from year to year…

The Development of Verbal and Visual Working Memory Processes: A Latent Variable Approach

ERIC Educational Resources Information Center

Koppenol-Gonzalez, Gabriela V.; Bouwmeester, Samantha; Vermunt, Jeroen K.

2012-01-01

Working memory (WM) processing in children has been studied with different approaches, focusing on either the organizational structure of WM processing during development (factor analytic) or the influence of different task conditions on WM processing (experimental). The current study combined both approaches, aiming to distinguish verbal and…

Basic Auditory Processing Skills and Phonological Awareness in Low-IQ Readers and Typically Developing Controls

ERIC Educational Resources Information Center

Kuppen, Sarah; Huss, Martina; Fosker, Tim; Fegan, Natasha; Goswami, Usha

2011-01-01

We explore the relationships between basic auditory processing, phonological awareness, vocabulary, and word reading in a sample of 95 children, 55 typically developing children, and 40 children with low IQ. All children received nonspeech auditory processing tasks, phonological processing and literacy measures, and a receptive vocabulary task.…

Climate Action Planning Process | Climate Neutral Research Campuses | NREL

Science.gov Websites

Action Planning Process Climate Action Planning Process For research campuses, NREL has developed a five-step process to develop and implement climate action plans: Determine baseline energy consumption Analyze technology options Prepare a plan and set priorities Implement the climate action plan Measure and

Looking for Synergies: Education for Sustainable Development and the Bologna Process

ERIC Educational Resources Information Center

Fadeeva, Zinaida; Galkute, Laima

2012-01-01

In defining quality of higher education, competences achieved by graduates are interpreted as essential criteria. There are two political processes in education dealing, among other issues, with competence development: the Bologna Process in European Higher Education Area and a global process--the United Nations (UN) Decade (2005-2014) of…

A Development Architecture for Serious Games Using BCI (Brain Computer Interface) Sensors

PubMed Central

Sung, Yunsick; Cho, Kyungeun; Um, Kyhyun

2012-01-01

Games that use brainwaves via brain–computer interface (BCI) devices, to improve brain functions are known as BCI serious games. Due to the difficulty of developing BCI serious games, various BCI engines and authoring tools are required, and these reduce the development time and cost. However, it is desirable to reduce the amount of technical knowledge of brain functions and BCI devices needed by game developers. Moreover, a systematic BCI serious game development process is required. In this paper, we present a methodology for the development of BCI serious games. We describe an architecture, authoring tools, and development process of the proposed methodology, and apply it to a game development approach for patients with mild cognitive impairment as an example. This application demonstrates that BCI serious games can be developed on the basis of expert-verified theories. PMID:23202227

A development architecture for serious games using BCI (brain computer interface) sensors.

PubMed

Sung, Yunsick; Cho, Kyungeun; Um, Kyhyun

2012-11-12

Games that use brainwaves via brain-computer interface (BCI) devices, to improve brain functions are known as BCI serious games. Due to the difficulty of developing BCI serious games, various BCI engines and authoring tools are required, and these reduce the development time and cost. However, it is desirable to reduce the amount of technical knowledge of brain functions and BCI devices needed by game developers. Moreover, a systematic BCI serious game development process is required. In this paper, we present a methodology for the development of BCI serious games. We describe an architecture, authoring tools, and development process of the proposed methodology, and apply it to a game development approach for patients with mild cognitive impairment as an example. This application demonstrates that BCI serious games can be developed on the basis of expert-verified theories.

Development of Pulsed Processes for the Manufacture of Solar Cells

NASA Technical Reports Server (NTRS)

1979-01-01

The development status of the process based upon ion implantation for the introduction of junctions and back surface fields is described. A process sequence is presented employing ion implantation and pulse processing. Efforts to improve throughout and descrease process element costs for furnace annealing are described. Design studies for a modular 3,000 wafer per hour pulse processor are discussed.

Aqueous and pyrochemical reprocessing of actinide fuels

NASA Astrophysics Data System (ADS)

Toth, L. Mac; Bond, Walter D.; Avens, Larry R.

1993-02-01

Processing of the nuclear fuel actinides has developed in two independent directions—aqueous processing and pyroprocessing. Similarities in the two processes, their goals, and restraints are indicated in brief parallel descriptions along with distinguishing advantages and areas of future development. It is suggested that from a technical viewpoint, the ultimate process might be a hybrid which incorporates the best steps of each process.

Development of a health-related website for parents of children receiving hematopoietic stem cell transplant: HSCT-CHESS.

PubMed

Mayer, Deborah K; Ratichek, S; Berhe, H; Stewart, S; McTavish, F; Gustafson, D; Parsons, S K

2010-03-01

Parents of pediatric hematopoietic stem cell transplant (HSCT) play a pivotal role in the care of their child during and after transplant. In addition to the child's comforter, parents also serve as care coordinators and conduits of communication between various health care providers, family and community members. The stress on the parent and family is enormous during this process, which for many is compounded by geographic dislocation to accompany their child during the rigorous treatment and recovery process. For many parents, their own recovery spans months to years. Parental activation, a process of becoming informed to participate in decisions, collaborate with health care providers, and manage care provided the conceptual framework to develop an eHealth approach for this population. HSCT-CHESS was developed, based on previous success with an existing eHealth system of integrated services, the Comprehensive Health Enhancement Support System (CHESS). CHESS(TM) is designed to help individuals and families cope with a health crisis or medical concern. The iterative user-centered development process for HSCT-CHESS included parents of HSCT recipients, representatives from an HSCT Advocacy Group, and members of the clinical, research, development and design teams. This rigorous process, including online focus groups and surveys, utilization of a parental user group, and an editorial and development process are described. As the population of cancer survivors and caregivers increase and as the oncology workforce becomes more stretched; developing eHealth applications may be an approach to address many of caregivers unmet needs. The purpose in describing this process is to help others when considering such an endeavor. HSCT-CHESS is now being tested in a randomized controlled trial versus standard care to evaluate its impact on the quality of life of both the parent and child HSCT recipient.

The study of develop optimization to control various resist defect in Photomask fabrication

NASA Astrophysics Data System (ADS)

Lim, JongHoon; Kim, ByungJu; Son, JaeSik; Park, EuiSang; Kim, SangPyo; Yim, DongGyu

2015-07-01

To reduce the pattern size in photomask is an inevitable trend because of the minimization of chip size. So it makes a big challenge to control defects in photomask industry. Defects below a certain size that had not been any problem in previous technology node are becoming an issue as the patterns are smaller. Therefore, the acceptable tolerance levels for current defect size and quantity are dramatically reduced. Because these defects on photomask can be the sources of the repeating defects on wafer, small size defects smaller than 200nm should not be ignored any more. Generally, almost defects are generated during develop process and etch process. Especially it is difficult to find the root cause of defects formed during the develop process because of their various types and very small size. In this paper, we studied how these small defects can be eliminated by analyzing the defects and tuning the develop process. There are 3 types of resist defects which are named as follows. The first type is `Popcorn' defect which is mainly occurred in negative resist and exists on the dark features. The second type is `Frog eggs' defect which is occurred in 2nd process of HTPSM and exists on the wide space area. The last type is `Spot' defect which also exists on the wide space area. These defects are generally appeared on the entire area of a plate and the number of these defects is about several hundred. It is thought that the original source is the surface's hydrophilic state before develop process or the incongruity between resist and developer. This study shows that the optimizing the develop process can be a good solution for some resist defects.

Development of ceramic matrix composites for application in the ceramic technology for Advanced Heat Engines Project: Phase 2a, Development of in-situ toughened silicon nitride. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollinger, J.; Newson, D.; Yeh, H.

1992-06-01

The objective of this program was to develop a net shape forming process for an in-situ reinforced Si{sub 3}N{sub 4} (AS-700). AS-700 was initially developed using cold isostatic pressing (CIP) of alcohol milled powders. The CIP`ed AS-700 material exhibited a moderate strength (690 MPa) and high toughness (9 MPa{radical}m) at room temperature. In addition to net-shape process development, optimization of AS-700 properties was also investigated through the refinement of densification processes, and evaluation of the effect of Si{sub 3}N{sub 4} powder properties on resulting microstructure and mechanical properties. Slip casting was chosen as the net-shape forming process. A slip castingmore » process was successfully developed for forming green parts ranging from thin plates to thick cylinders, and to large complex shaped turbine rotors. The densification cycle was optimized to achieve full density parts without any cracks or warpage, and with comparable properties and microstructure to the CIP`ed baseline AS-700 material. The evaluation of six (6) alternate Si{sub 3}N{sub 4} powders indicated that Si{sub 3}N{sub 4} powders have a very strong influence on the development of resulting AS-700 in-situ microstructures and mechanical properties. The AS-700 slip casting process and optimized densification process were then combined and a number of test specimens were fabricated. The mechanical properties and microstructure of the optimized slip cast AS-700 Si{sub 3}N{sub 4} were then fully characterized. The key property values are: 695 MPa at room temperature, 446 MPa at 1370{degree}C flexural strengths and 8.25 MPa{radical}m toughness.« less

Demand driven salt clean-up in a molten salt fast reactor – Defining a priority list

PubMed Central

Litskevich, D.; Gregg, R.; Mount, A. R.

2018-01-01

The PUREX technology based on aqueous processes is currently the leading reprocessing technology in nuclear energy systems. It seems to be the most developed and established process for light water reactor fuel and the use of solid fuel. However, demand driven development of the nuclear system opens the way to liquid fuelled reactors, and disruptive technology development through the application of an integrated fuel cycle with a direct link to reactor operation. The possibilities of this new concept for innovative reprocessing technology development are analysed, the boundary conditions are discussed, and the economic as well as the neutron physical optimization parameters of the process are elucidated. Reactor physical knowledge of the influence of different elements on the neutron economy of the reactor is required. Using an innovative study approach, an element priority list for the salt clean-up is developed, which indicates that separation of Neodymium and Caesium is desirable, as they contribute almost 50% to the loss of criticality. Separating Zirconium and Samarium in addition from the fuel salt would remove nearly 80% of the loss of criticality due to fission products. The theoretical study is followed by a qualitative discussion of the different, demand driven optimization strategies which could satisfy the conflicting interests of sustainable reactor operation, efficient chemical processing for the salt clean-up, and the related economic as well as chemical engineering consequences. A new, innovative approach of balancing the throughput through salt processing based on a low number of separation process steps is developed. Next steps for the development of an economically viable salt clean-up process are identified. PMID:29494604

From theory to 'measurement' in complex interventions: methodological lessons from the development of an e-health normalisation instrument.

PubMed

Finch, Tracy L; Mair, Frances S; O'Donnell, Catherine; Murray, Elizabeth; May, Carl R

2012-05-17

Although empirical and theoretical understanding of processes of implementation in health care is advancing, translation of theory into structured measures that capture the complex interplay between interventions, individuals and context remain limited. This paper aimed to (1) describe the process and outcome of a project to develop a theory-based instrument for measuring implementation processes relating to e-health interventions; and (2) identify key issues and methodological challenges for advancing work in this field. A 30-item instrument (Technology Adoption Readiness Scale (TARS)) for measuring normalisation processes in the context of e-health service interventions was developed on the basis on Normalization Process Theory (NPT). NPT focuses on how new practices become routinely embedded within social contexts. The instrument was pre-tested in two health care settings in which e-health (electronic facilitation of healthcare decision-making and practice) was used by health care professionals. The developed instrument was pre-tested in two professional samples (N=46; N=231). Ratings of items representing normalisation 'processes' were significantly related to staff members' perceptions of whether or not e-health had become 'routine'. Key methodological challenges are discussed in relation to: translating multi-component theoretical constructs into simple questions; developing and choosing appropriate outcome measures; conducting multiple-stakeholder assessments; instrument and question framing; and more general issues for instrument development in practice contexts. To develop theory-derived measures of implementation process for progressing research in this field, four key recommendations are made relating to (1) greater attention to underlying theoretical assumptions and extent of translation work required; (2) the need for appropriate but flexible approaches to outcomes measurement; (3) representation of multiple perspectives and collaborative nature of work; and (4) emphasis on generic measurement approaches that can be flexibly tailored to particular contexts of study.

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development.

PubMed

Fairley, C; Bleay, S M; Sears, V G; NicDaeid, N

2012-04-10

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

NASA Technical Reports Server (NTRS)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

Housing decision making methods for initiation development phase process

NASA Astrophysics Data System (ADS)

Zainal, Rozlin; Kasim, Narimah; Sarpin, Norliana; Wee, Seow Ta; Shamsudin, Zarina

2017-10-01

Late delivery and sick housing project problems were attributed to poor decision making. These problems are the string of housing developer that prefers to create their own approach based on their experiences and expertise with the simplest approach by just applying the obtainable standards and rules in decision making. This paper seeks to identify the decision making methods for housing development at the initiation phase in Malaysia. The research involved Delphi method by using questionnaire survey which involved 50 numbers of developers as samples for the primary stage of collect data. However, only 34 developers contributed to the second stage of the information gathering process. At the last stage, only 12 developers were left for the final data collection process. Finding affirms that Malaysian developers prefer to make their investment decisions based on simple interpolation of historical data and using simple statistical or mathematical techniques in producing the required reports. It was suggested that they seemed to skip several important decision-making functions at the primary development stage. These shortcomings were mainly due to time and financial constraints and the lack of statistical or mathematical expertise among the professional and management groups in the developer organisations.

Discovery of new candidate genes related to brain development using protein interaction information.

PubMed

Chen, Lei; Chu, Chen; Kong, Xiangyin; Huang, Tao; Cai, Yu-Dong

2015-01-01

Human brain development is a dramatic process composed of a series of complex and fine-tuned spatiotemporal gene expressions. A good comprehension of this process can assist us in developing the potential of our brain. However, we have only limited knowledge about the genes and gene functions that are involved in this biological process. Therefore, a substantial demand remains to discover new brain development-related genes and identify their biological functions. In this study, we aimed to discover new brain-development related genes by building a computational method. We referred to a series of computational methods used to discover new disease-related genes and developed a similar method. In this method, the shortest path algorithm was executed on a weighted graph that was constructed using protein-protein interactions. New candidate genes fell on at least one of the shortest paths connecting two known genes that are related to brain development. A randomization test was then adopted to filter positive discoveries. Of the final identified genes, several have been reported to be associated with brain development, indicating the effectiveness of the method, whereas several of the others may have potential roles in brain development.

Scriptotherapy: A Technique for Conflict Resolution.

ERIC Educational Resources Information Center

Johnson, Roy E.

Part 1 of this dissertation contains an introductory chapter entitled, "The Children Shout Fight Fight," in which the written analytical process named Scriptotherapy is discussed. In Chapter 1, "Early Adolescence an Ongoing Process," early adolescent growth and development, the process of moral development, temperament types…

Our Application of ISO 9000.

ERIC Educational Resources Information Center

Hammond, Jane

2000-01-01

Since a large, underfunded urban Colorado district initiated ISO 9000 reforms, administrators and staff have reviewed 14 central-office departments' processes to improve efficiency and enhance student outcomes. Jefferson County has saved $900,000 annually on purchasing processes, developed a quality curriculum-development process, and improved…

DEVELOPMENT OF CAPE-OPEN COMPLIANT PROCESS MODELING COMPONENTS IN MICROSOFT .NET

EPA Science Inventory

The CAPE-OPEN middleware standards were created to allow process modeling components (PMCs) developed by third parties to be used in any process modeling environment (PME) utilizing these standards. The CAPE-OPEN middleware specifications were based upon both Microsoft's Compone...

Tailoring advanced technologies for air traffic control : the importance of the development process

DOT National Transportation Integrated Search

1995-04-01

This paper describes a process that is currently being applied to the : development and assessment of an advanced air traffic control (ATC) system, the : Center TRACON Automation System (CTAS). This process deviates from established : practices of AT...

A Guide to Writing a Qualitative Systematic Review Protocol to Enhance Evidence-Based Practice in Nursing and Health Care.

PubMed

Butler, Ashleigh; Hall, Helen; Copnell, Beverley

2016-06-01

The qualitative systematic review is a rapidly developing area of nursing research. In order to present trustworthy, high-quality recommendations, such reviews should be based on a review protocol to minimize bias and enhance transparency and reproducibility. Although there are a number of resources available to guide researchers in developing a quantitative review protocol, very few resources exist for qualitative reviews. To guide researchers through the process of developing a qualitative systematic review protocol, using an example review question. The key elements required in a systematic review protocol are discussed, with a focus on application to qualitative reviews: Development of a research question; formulation of key search terms and strategies; designing a multistage review process; critical appraisal of qualitative literature; development of data extraction techniques; and data synthesis. The paper highlights important considerations during the protocol development process, and uses a previously developed review question as a working example. This paper will assist novice researchers in developing a qualitative systematic review protocol. By providing a worked example of a protocol, the paper encourages the development of review protocols, enhancing the trustworthiness and value of the completed qualitative systematic review findings. Qualitative systematic reviews should be based on well planned, peer reviewed protocols to enhance the trustworthiness of results and thus their usefulness in clinical practice. Protocols should outline, in detail, the processes which will be used to undertake the review, including key search terms, inclusion and exclusion criteria, and the methods used for critical appraisal, data extraction and data analysis to facilitate transparency of the review process. Additionally, journals should encourage and support the publication of review protocols, and should require reference to a protocol prior to publication of the review results. © 2016 Sigma Theta Tau International.

Development and Hotfire Testing of Additively Manufactured Copper Combustion Chambers for Liquid Rocket Engine Applications

NASA Technical Reports Server (NTRS)

Gradl, Paul R.; Greene, Sandy; Protz, Chris

2017-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM), commonly referred to as additive manufacturing (AM). The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for GRCop-84 (a NASA Glenn Research Center-developed copper, chrome, niobium alloy) commensurate with powder bed AM, evaluate bimetallic deposition, and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. To advance the processes further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic AM chambers. In addition to the LCUSP program, NASA’s Marshall Space Flight Center (MSFC) has completed a series of development programs and hot-fire tests to demonstrate SLM GRCop-84 and other AM techniques. MSFC’s efforts include a 4,000 pounds-force thrust liquid oxygen/methane (LOX/CH4) combustion chamber. Small thrust chambers for 1,200 pounds-force LOX/hydrogen (H2) applications have also been designed and fabricated with SLM GRCop-84. Similar chambers have also completed development with an Inconel 625 jacket bonded to the GRCop-84 material, evaluating direct metal deposition (DMD) laser- and arc-based techniques. The same technologies for these lower thrust applications are being applied to 25,000-35,000 pounds-force main combustion chamber (MCC) designs. This paper describes the design, development, manufacturing and testing of these numerous combustion chambers, and the associated lessons learned throughout their design and development processes.

End users transforming experiences into formal information and process models for personalised health interventions.

PubMed

Lindgren, Helena; Lundin-Olsson, Lillemor; Pohl, Petra; Sandlund, Marlene

2014-01-01

Five physiotherapists organised a user-centric design process of a knowledge-based support system for promoting exercise and preventing falls. The process integrated focus group studies with 17 older adults and prototyping. The transformation of informal medical and rehabilitation expertise and older adults' experiences into formal information and process models during the development was studied. As tool they used ACKTUS, a development platform for knowledge-based applications. The process became agile and incremental, partly due to the diversity of expectations and preferences among both older adults and physiotherapists, and the participatory approach to design and development. In addition, there was a need to develop the knowledge content alongside with the formal models and their presentations, which allowed the participants to test hands-on and evaluate the ideas, content and design. The resulting application is modular, extendable, flexible and adaptable to the individual end user. Moreover, the physiotherapists are able to modify the information and process models, and in this way further develop the application. The main constraint was found to be the lack of support for the initial phase of concept modelling, which lead to a redesigned user interface and functionality of ACKTUS.

Semiautomated Sample Preparation for Protein Stability and Formulation Screening via Buffer Exchange.

PubMed

Ying, William; Levons, Jaquan K; Carney, Andrea; Gandhi, Rajesh; Vydra, Vicky; Rubin, A Erik

2016-06-01

A novel semiautomated buffer exchange process workflow was developed to enable efficient early protein formulation screening. An antibody fragment protein, BMSdab, was used to demonstrate the workflow. The process afforded 60% to 80% cycle time and scientist time savings and significant material efficiencies. These efficiencies ultimately facilitated execution of this stability work earlier in the drug development process, allowing this tool to inform the developability of potential candidates for development from a formulation perspective. To overcome the key technical challenges, the protein solution was buffer-exchanged by centrifuge filtration into formulations for stability screening in a 96-well plate with an ultrafiltration membrane, leveraging automated liquid handling and acoustic volume measurements to allow several cycles of exchanges. The formulations were transferred into a vacuum manifold and sterile filtered into a rack holding 96 glass vials. The vials were sealed with a capmat of individual caps and placed in stability stations. Stability of the samples prepared by this process and by the standard process was demonstrated to be comparable. This process enabled screening a number of formulations of a protein at an early pharmaceutical development stage with a short sample preparation time. © 2015 Society for Laboratory Automation and Screening.

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Study of Crystallographic Texture During Thermo-Mechanical Processing of Boron Modified Ti-Alloys

DTIC Science & Technology

2009-07-15

project developed a processing strategy for boron-modified titanium alloy Ti- 6Al - 4V , and developed an understanding of the deformation and...develop the processing strategy for boron modified titanium alloy Ti- 6Al - 4V 2. To understand the deformation and transformation mechanisms as a function...strength-to-weight ratio, excellent mechanical properties and corrosion resistance, titanium (Ti) and its alloys, especially (α+β) alloys like Ti- 6Al - 4V

Process wastewater treatability study for Westinghouse fluidized-bed coal gasification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winton, S.L.; Buvinger, B.J.; Evans, J.M.

1983-11-01

In the development of a synthetic fuels facility, water usage and wastewater treatment are major areas of concern. Coal gasification processes generally produce relatively large volumes of gas condensates. These wastewaters are typically composed of a variety of suspended and dissolved organic and inorganic solids and dissolved gaseous contaminants. Fluidized-bed coal gasification (FBG) processes are no exception to this rule. The Department of Energy's Morgantown Energy Technology Center (METC), the Gas Research Institute (GRI), and the Environmental Protection Agency (EPA/IERLRTP) recognized the need for a FBG treatment program to provide process design data for FBG wastewaters during the environmental, health,more » and safety characterization of the Westinghouse Process Development Unit (PDU). In response to this need, METC developed conceptual designs and a program plan to obtain process design and performance data for treating wastewater from commercial-scale Westinghouse-based synfuels plants. As a result of this plan, METC, GRI, and EPA entered into a joint program to develop performance data, design parameters, conceptual designs, and cost estimates for treating wastewaters from a FBG plant. Wastewater from the Westinghouse PDU consists of process quench and gas cooling condensates which are similar to those produced by other FBG processes such as U-Gas, and entrained-bed gasification processes such as Texaco. Therefore, wastewater from this facility was selected as the basis for this study. This paper outlines the current program for developing process design and cost data for the treatment of these wastewaters.« less

Research recommendations

NASA Technical Reports Server (NTRS)

1979-01-01

The research and development sequences and priorities for CELSS development were established for each of the following areas: nutrition and food processing, food production, waste processing, systems engineering/modeling, and ecology-systems safety.

Turbulence Modeling: Progress and Future Outlook

NASA Technical Reports Server (NTRS)

Marvin, Joseph G.; Huang, George P.

1996-01-01

Progress in the development of the hierarchy of turbulence models for Reynolds-averaged Navier-Stokes codes used in aerodynamic applications is reviewed. Steady progress is demonstrated, but transfer of the modeling technology has not kept pace with the development and demands of the computational fluid dynamics (CFD) tools. An examination of the process of model development leads to recommendations for a mid-course correction involving close coordination between modelers, CFD developers, and application engineers. In instances where the old process is changed and cooperation enhanced, timely transfer is realized. A turbulence modeling information database is proposed to refine the process and open it to greater participation among modeling and CFD practitioners.

Earth Sciences Data and Information System (ESDIS) program planning and evaluation methodology development

NASA Technical Reports Server (NTRS)

Dickinson, William B.

1995-01-01

An Earth Sciences Data and Information System (ESDIS) Project Management Plan (PMP) is prepared. An ESDIS Project Systems Engineering Management Plan (SEMP) consistent with the developed PMP is also prepared. ESDIS and related EOS program requirements developments, management and analysis processes are evaluated. Opportunities to improve the effectiveness of these processes and program/project responsiveness to requirements are identified. Overall ESDIS cost estimation processes are evaluated, and recommendations to improve cost estimating and modeling techniques are developed. ESDIS schedules and scheduling tools are evaluated. Risk assessment, risk mitigation strategies and approaches, and use of risk information in management decision-making are addressed.

Research & Development of Materials/Processing Methods for Continuous Fiber Ceramic Composites (CFCC) Phase 2 Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szweda, A.

2001-01-01

The Department of Energy's Continuous Fiber Ceramic Composites (CFCC) Initiative that begun in 1992 has led the way for Industry, Academia, and Government to carry out a 10 year R&D plan to develop CFCCs for these industrial applications. In Phase II of this program, Dow Corning has led a team of OEM's, composite fabricators, and Government Laboratories to develop polymer derived CFCC materials and processes for selected industrial applications. During this phase, Dow Corning carried extensive process development and representative component demonstration activities on gas turbine components, chemical pump components and heat treatment furnace components.

Evolution and the Growth Process: Natural Selection of Entrepreneurial Traits.

PubMed

Galor, Oded; Michalopoulos, Stelios

2012-03-01

This research suggests that a Darwinian evolution of entrepreneurial spirit played a significant role in the process of economic development and the dynamics of inequality within and across societies. The study argues that entrepreneurial spirit evolved non-monotonically in the course of human history. In early stages of development, risk-tolerant, growth promoting traits generated an evolutionary advantage and their increased representation accelerated the pace of technological progress and the process of economic development. In mature stages of development, however, risk-averse traits gained an evolutionary advantage, diminishing the growth potential of advanced economies and contributing to convergence in economic growth across countries.

Evolution and the Growth Process: Natural Selection of Entrepreneurial Traits*

PubMed Central

Galor, Oded; Michalopoulos, Stelios

2013-01-01

This research suggests that a Darwinian evolution of entrepreneurial spirit played a significant role in the process of economic development and the dynamics of inequality within and across societies. The study argues that entrepreneurial spirit evolved non-monotonically in the course of human history. In early stages of development, risk-tolerant, growth promoting traits generated an evolutionary advantage and their increased representation accelerated the pace of technological progress and the process of economic development. In mature stages of development, however, risk-averse traits gained an evolutionary advantage, diminishing the growth potential of advanced economies and contributing to convergence in economic growth across countries. PMID:25089059

Genetic Mapping of Brain Plasticity Across Development in Williams Syndrome: ERP Markers of Face and Language Processing

PubMed Central

Mills, D. L.; Dai, L.; Fishman, I.; Yam, A.; Appelbaum, L. G.; Galaburda, A.; Bellugi, U.; Korenberg, J. R.

2014-01-01

In Williams Syndrome (WS), a known genetic deletion results in atypical brain function with strengths in face and language processing. We examined how genetic influences on brain activity change with development. In three studies, ERPs from large samples of children, adolescents, and adults with the full genetic deletion for WS were compared to typically developing controls, and two adults with partial deletions for WS. Studies 1 and 2 identified ERP markers of brain plasticity in WS across development. Study 3 suggested that in adults with partial deletions for WS, specific genes may be differentially implicated in face and language processing. PMID:24219698

Flight Dynamics Mission Support and Quality Assurance Process

NASA Technical Reports Server (NTRS)

Oh, InHwan

1996-01-01

This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

From Discovery to Production: Biotechnology of Marine Fungi for the Production of New Antibiotics

PubMed Central

Silber, Johanna; Kramer, Annemarie; Labes, Antje; Tasdemir, Deniz

2016-01-01

Filamentous fungi are well known for their capability of producing antibiotic natural products. Recent studies have demonstrated the potential of antimicrobials with vast chemodiversity from marine fungi. Development of such natural products into lead compounds requires sustainable supply. Marine biotechnology can significantly contribute to the production of new antibiotics at various levels of the process chain including discovery, production, downstream processing, and lead development. However, the number of biotechnological processes described for large-scale production from marine fungi is far from the sum of the newly-discovered natural antibiotics. Methods and technologies applied in marine fungal biotechnology largely derive from analogous terrestrial processes and rarely reflect the specific demands of the marine fungi. The current developments in metabolic engineering and marine microbiology are not yet transferred into processes, but offer numerous options for improvement of production processes and establishment of new process chains. This review summarises the current state in biotechnological production of marine fungal antibiotics and points out the enormous potential of biotechnology in all stages of the discovery-to-development pipeline. At the same time, the literature survey reveals that more biotechnology transfer and method developments are needed for a sustainable and innovative production of marine fungal antibiotics. PMID:27455283

Engaging Patients and Caregivers Managing Rare Diseases to Improve the Methods of Clinical Guideline Development: A Research Protocol

PubMed Central

Kinnett, Kathi; Grant, Sean; Lucas, Ann; Martin, Ann; Denger, Brian; Peay, Holly; Coulter, Ian; Fink, Arlene

2017-01-01

Background Clinical guidelines provide systematically developed recommendations for deciding on appropriate health care options for specific conditions and clinical circumstances. Up until recently, patients and caregivers have rarely been included in the process of developing care guidelines. Objective This project will develop and test a new online method for including patients and their caregivers in this process using Duchenne muscular dystrophy (DMD) care guidelines as an example. The new method will mirror and complement the RAND/UCLA Appropriateness Method (RAM)—the gold standard approach for conducting clinical expert panels that uses a modified Delphi format. RAM is often used in clinical guideline development to determine care appropriateness and necessity in situations where existing clinical evidence is uncertain, weak, or unavailable. Methods To develop the new method for engaging patients and their caregivers in guideline development, we will first conduct interviews with experts on RAM, guideline development, patient engagement, and patient-centeredness and engage with Duchenne patients and caregivers to identify how RAM should be modified for the purposes of patient engagement and what rating criteria should patients and caregivers use to provide their input during the process of guideline development. Once the new method is piloted, we will test it by conducting two concurrently run patient/caregiver panels that will rate patient-centeredness of a subset of DMD care management recommendations already deemed clinically appropriate and necessary. The ExpertLens™ system—a previously evaluated online modified Delphi system that combines two rounds of rating with a round of feedback and moderated online discussions—will be used to conduct these panels. In addition to developing and testing the new engagement method, we will work with the members of our project’s Advisory Board to generate a list of best practices for enhancing the level of patient and caregiver involvement in the guideline development process. We will solicit input on these best practice from Duchenne patients, caregivers, and clinicians by conducting a series of round-table discussions and making a presentation at an annual conference on Duchenne. Results The study protocol was reviewed by RAND’s Human Subjects Protection Committee, which determined it to be exempt from review. Interviews with RAM experts have been completed. The projected study completion date is May 2020. Conclusions We expect that the new method will make it easier to engage large numbers of patients and caregivers in the process of guideline development in a rigorous and culturally appropriate manner that is consistent with the way clinicians participate in guideline development. Moreover, this project will develop best practices that could help involve patients and caregivers in the clinical guideline development process in other clinical areas, thereby facilitating the work of guideline developers. PMID:28455279

How drugs are developed and approved by the FDA: current process and future directions.

PubMed

Ciociola, Arthur A; Cohen, Lawrence B; Kulkarni, Prasad

2014-05-01

This article provides an overview of FDA's regulatory processes for drug development and approval, and the estimated costs associated with the development of a drug, and also examines the issues and challenges facing the FDA in the near future. A literature search was performed using MEDLINE to summarize the current FDA drug approval processes and future directions. MEDLINE was further utilized to search for all cost analysis studies performed to evaluate the pharmaceutical industry R&D productivity and drug development cost estimates. While the drug approval process remains at high risk and spans over multiple years, the FDA drug review and approval process has improved, with the median approval time for new molecular drugs been reduced from 19 months to 10 months. The overall cost to development of a drug remains quite high and has been estimated to range from $868M to $1,241M USD. Several new laws have been enacted, including the FDA Safety and Innovation Act (FDASIA) of 2013, which is designed to improve the drug approval process and enhance access to new medicines. The FDA's improved processes for drug approval and post-market surveillance have achieved the goal of providing patients with timely access to effective drugs while minimizing the risk of drug-related harm. The FDA drug approval process is not without controversy, as a number of well-known gastroenterology drugs have been withdrawn from the US market over the past few years. With the approval of the new FDASIA law, the FDA will continue to improve their processes and, working together with the ACG through the FDA-Related Matters Committee, continue to develop safe and effective drugs for our patients.