Partnering for Quality under the Workforce Investment Act: A Tool Kit for One-Stop System Building. Summary of Tools.

ERIC Educational Resources Information Center

Kogan, Deborah; Koller, Vinz; Kozumplik, Richalene; Lawrence, Mary Ann

This document presents 22 tools that were developed for use in a five-module training package to assist employment and training service providers comply with the Workforce Investment Act of 1998 and develop a one-stop training and employment services system. Each tool addresses a different aspect of the process of developing a one-stop delivery…

Using a Collaborative Process to Develop Goals and Self-Management Interventions to Support Young Adults with Disabilities at Work

ERIC Educational Resources Information Center

Nittrouer, Christine L.; Shogren, Karrie A.; Pickens, Julie L.

2016-01-01

Purpose: This study examined the impact of using a collaborative process with person-centered teams and a functional assessment of problems in the workplace to design individualized goals and self-management interventions to support young adults with disabilities. These young adults had achieved employment through a customized employment process…

Comparative Analysis of the Measurement of Total Instructional Alignment

ERIC Educational Resources Information Center

Kick, Laura C.

2013-01-01

In 2007, Lisa Carter created the Total Instructional Alignment system--a process that aligns standards, curriculum, assessment, and instruction. Employed in several hundred school systems, the TIA process is a successful professional development program. The researcher developed an instrument to measure the success of the TIA process with the…

Development of Pulsed Processes for the Manufacture of Solar Cells

NASA Technical Reports Server (NTRS)

1979-01-01

The development status of the process based upon ion implantation for the introduction of junctions and back surface fields is described. A process sequence is presented employing ion implantation and pulse processing. Efforts to improve throughout and descrease process element costs for furnace annealing are described. Design studies for a modular 3,000 wafer per hour pulse processor are discussed.

Development of an Automated System for Evaluation of Student Teacher Effectiveness. Final Report.

ERIC Educational Resources Information Center

Chissom, Brad S.; Morris, John E.

The primary purpose of this project was to develop a system for the evaluation of student teachers employing automated data processing as an integral part of the system. This system employed data gathered from four sources: (1) Public School Pupils, Grades 7-12; (2) Student Teachers; (3) Supervising Teachers; (4) College Supervisors. The emphasis…

An exercise in controversy. Case study: revising a physician employment agreement.

PubMed

Fitzgerald, Paul E; Burkett, Steven H; Key, Charles M

2003-01-01

The physician employment agreement at a faculty practice plan did not meet the needs of a modern health care employer or its medical staff. This article describes the communication among medical group management, medical leadership and the medical staff during the revision of the agreement, as well as the process used to develop a new document.

Cryogenic, X-band and Ka-band InP HEMT based LNAs for the Deep Space Network

NASA Technical Reports Server (NTRS)

Bautista, J. J.; Bowen, J. G.; Fernandez, J. E.; Fujiwara, B.; Loreman, J.; Petty, S.; Prater, J. L.

2000-01-01

This paper presents an overview of this development process with emphasis on comparison between modeled and measured, LNA modules, front-end receiver packages employing these modules, and antennae employing these packages.

Intercomparison of U.S. Ballast Water Test Facilities

DTIC Science & Technology

2012-11-01

with many of the requirements of the ETV Protocol, although in some aspects, they employed different approaches and processes . The ETV Protocol calls...and recommendations from the audit process will be reported separately by NSF (in preparation). Both TFs benefited from developing procedures needed...11  4.1.2  Development Process

Meat Processor. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for meat processing occupations. The list contains units (with and without subunits), competencies, and competency builders…

Improving educational objectives of the Industrial and Management Systems Engineering programme at Kuwait University

NASA Astrophysics Data System (ADS)

Aldowaisan, Tariq; Allahverdi, Ali

2016-05-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and update of the PEOs. For each PEO an assessment process is employed where performance measures are defined along with target attainment levels. Results from assessment tools are compared with the target attainment levels to measure performance with regard to the PEOs. The assessment indicates that the results meet or exceed the target attainment levels of the PEOs' performance measures.

Self-tracking, governmentality, and Nursing and Midwifery Council's (2016) revalidation policy.

PubMed

Lanlehin, Rosemary M

2018-05-01

In April 2016 the Nursing and Midwifery Council (NMC) introduced a new revalidation continuous professional development (CPD) policy. This policy states that revalidation is the responsibility of nurses, and although employers are urged to support the revalidation process, the NMC clearly states that employers have no legal requirement to provide either time or funds for the CPD activities of nurses and midwives (NMC, 2014, 2016; Royal College of Nursing, 2016). The aim of this professional development policy is to ensure that nurses and midwives maintain their professional competency and to promote public safety and confidence in nurses and midwives. A closer look at the process of revalidation suggests that several measures have been introduced to ensure that nurses and midwives conform to the CPD policy, and this paper examines the influence of governmentality and neoliberalism on the NMC's self-tracking revalidation policy. It will be recommended that the responsibility for the revalidation process should be shared by nurses, midwives, and their employers, and that time and money should be allocated for the professional development of nurses and midwives. Copyright © 2018 Elsevier Ltd. All rights reserved.

Engineering design: A cognitive process approach

NASA Astrophysics Data System (ADS)

Strimel, Greg Joseph

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. Therefore, Research Objective 1 was to identify the fundamental cognitive processes students use to design, construct, and evaluate operational solutions to engineering design problems. Research Objective 2 was to determine identifiers within student cognitive processes for monitoring aptitude to successfully design, construct, and evaluate technological solutions. Lastly, Research Objective 3 was to create a conceptual technological and engineering problem-solving model integrating student cognitive processes for the improved development of problem-solving abilities. The methodology of this study included multiple forms of data collection. The participants were first given a survey to determine their prior experience with engineering and to provide a description of the subjects being studied. The participants were then presented an engineering design challenge to solve individually. While they completed the challenge, the participants verbalized their thoughts using an established "think aloud" method. These verbalizations were captured along with participant observational recordings using point-of-view camera technology. Additionally, the participant design journals, design artifacts, solution effectiveness data, and teacher evaluations were collected for analysis to help achieve the research objectives of this study. Two independent coders then coded the video/audio recordings and the additional design data using Halfin's (1973) 17 mental processes for technological problem-solving. The results of this study indicated that the participants employed a wide array of mental processes when solving engineering design challenges. However, the findings provide a general analysis of the number of times participants employed each mental process, as well as the amount of time consumed employing the various mental processes through the different stages of the engineering design process. The results indicated many similarities between the students solving the problem, which may highlight voids in current technology and engineering education curricula. Additionally, the findings showed differences between the processes employed by participants that created the most successful solutions and the participants who developed the least effective solutions. Upon comparing and contrasting these processes, recommendations for instructional strategies to enhance a student's capability for solving engineering design problems were developed. The results also indicated that students, when left without teacher intervention, use a simplified and more natural process to solve design challenges than the 12-step engineering design process reported in much of the literature. Lastly, these data indicated that students followed two different approaches to solving the design problem. Some students employed a sequential and logical approach, while others employed a nebulous, solution centered trial-and-error approach to solving the problem. In this study the participants who were more sequential had better performing solutions. Examining these two approaches and the student cognition data enabled the researcher to generate a conceptual engineering design model for the improved teaching and development of engineering design problem solving.

Leading Our World Forward: An Examination of Student Leadership Development

ERIC Educational Resources Information Center

Grunwell, Stewart G.

2015-01-01

This study seeks to examine the processes through which leadership is fostered and developed within student leadership development programs. While there has been some scholarly literature written in this area, a dearth in the literature exists with respect to providing a detailed chronicle and examination of the complete processes employed within…

How can the rehabilitation planning process at the workplace be improved? A qualitative study from employers' perspective.

PubMed

Larsson, Agneta; Gard, Gunvor

2003-09-01

Employers in Sweden are by law responsible for planning and controlling the working environment situation in their companies and for ensuring that any need for rehabilitation is noted as soon as possible and that action is taken. This includes developing a plan for rehabilitation. The aim of this study is to describe employers' experiences of the work rehabilitation planning process at the workplace, and how it can be improved with a focus on quality and cost-effectiveness. Qualitative interviews were performed with 10 employers of employee/s that had participated in vocational rehabilitation at a rehabilitation center in the North of Sweden. The results showed that employers were interested in detecting work rehabilitation needs and in taking action early. Rehabilitation at the workplace could be improved by development of routines, improved work relations and work technique, and environment in-service training at the workplace. Prevention was perceived as a prerequisite for a good result of rehabilitation. Attention to social and geographic conditions is needed. Organizational and financial limitations exist.

ECOMAT INC. BIOLOGICAL DENITRIFICATION PROCESS, ITER

EPA Science Inventory

EcoMat, Inc. of Hayward, California (EcoMat) has developed an ex situ anoxic biofilter biodenitrification (BDN) process. The process uses specific biocarriers and bacteria to treat nitrate-contaminated water and employs a patented reactor that retains biocarrier within the syste...

Productive Skills for Process Operatives. Skills Review.

ERIC Educational Resources Information Center

Giles, L.; Kodz, J.; Evans, C.

A study of process operatives examined the developments in processing work in 20 organizations within the chemical and food and drink processing industries. Seven exploratory interviews were followed by 20 employer interviews. Technological innovations caused job losses and layoffs. Organizational responses adopted to meet increasing competitive…

Welding. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a welding program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability skills needed…

Swine Producer. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a swine producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability skills…

DEVELOPMENT OF A SCALABLE, LOW-COST, ULTRANANOCRYSTALLINE DIAMOND ELECTROCHEMICAL PROCESS FOR THE DESTRUCTION OF CONTAMINANTS OF EMERGING CONCERN (CECS) - PHASE II

EPA Science Inventory

This Small Business Innovation Research (SBIR) Phase II project will employ the large scale; highly reliable boron-doped ultrananocrystalline diamond (BD-UNCD®) electrodes developed during Phase I project to build and test Electrochemical Anodic Oxidation process (EAOP)...

ECOMAT INC. BIOLOGICAL DENIFTRICATION PROCESS; SITE TECHNOLOGY CAPSULE

EPA Science Inventory

EcoMat, Inc. of Hayward, California (EcoMat) has developed an ex situ anoxic biofilter biodenitrification (BDN) process. The process uses specific biocarriers and bacteria to treat nitrate-contaminated water and employs a patented reactor that retains biocarrier within the syste...

20 CFR 632.17 - Planning process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Planning process. 632.17 Section 632.17... EMPLOYMENT AND TRAINING PROGRAMS Program Planning, Application and Modification Procedures § 632.17 Planning process. (a) Each Native American grantee shall establish a planning process for the development of its...

Intelligent processing of acoustic emission signals

NASA Astrophysics Data System (ADS)

Sachse, Wolfgang; Grabec, Igor

1992-07-01

Recent developments in applying neural-like signal-processing procedures for analyzing acoustic emission signals are summarized. These procedures employ a set of learning signals to develop a memory that can subsequently be utilized to process other signals to recover information about an unknown source. A majority of the current applications to process ultrasonic waveforms are based on multilayered, feed-forward neural networks, trained with some type of back-error propagation rule.

Hospital employs TQM principles to rework its evaluation system.

PubMed

Burda, D

1992-02-24

One Kansas hospital has taken the traditional employee evaluation process--with all its performance criteria, point systems and rankings--and turned it on its head. The new system employs total quality management principles and promotes personal development, education and teamwork. And everyone gets the same raise.

CORPEX{reg_sign} NORM decontamination process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azrak, R.G.

1997-02-01

This paper describes a commecial process which has been developed for application to the remediation of NORM deposits on metal parts or embedded in scales on such parts. The process employs a registered chemical process, involving non-RCRA regulated chemicals, which can remove fixed {sup 226,228}Radium, {sup 210}Lead, and {sup 210}Polonium. The author describes the capabilities of the chemical process which has been developed, the way it is offered to potential customers as a practical process, and numerous examples of its application in the field.

Economic Insecurity and Global Casualisation: Threat or Promise?

ERIC Educational Resources Information Center

Standing, Guy

2008-01-01

Casualisation has both negative and positive sides, for both workers and employers. This article considers how the positive sides could be developed while allowing casual work to continue to grow. In reviewing the advantages and disadvantages of casual labour for employers, the paper depicts casualisation (and the related process of…

[Urban employment and internal migration in Peru].

PubMed

Cotlear, D

1984-06-01

The relationship between internal migration and employment problems in Peru is examined. The author argues that regional differences in income distribution are the primary causes of migration, particularly to urban areas. A model of the migration process is developed and tested using data from official sources, surveys, and the published literature.

Partnering for Quality under the Workforce Investment Act: A Tool Kit for One-Stop System Building. Module 5: Building a Process for Continuous Improvement. Training Manual with Participant Workbook.

ERIC Educational Resources Information Center

Kogan, Deborah; Koller, Vinz; Kozumplik, Richalene; Lawrence, Mary Ann

This document is part of a five-module training package to help employment and training service providers comply with the Workforce Investment Act (WIA) of 1998 and develop a one-stop training and employment services system. It consists of the participant workbook, trainer manual, and activity worksheets for a module on building a process for…

Declining physical activity and the socio-cultural context of the geography of industrial restructuring: a novel conceptual framework.

PubMed

Rind, Esther; Jones, Andy

2014-05-01

At the population level, the prevalence of physical activity has declined considerably in many developed countries in recent decades. There is some evidence that areas exhibiting the lowest activity levels are those which have undergone a particularly strong transition away from employment in physically demanding occupations. We propose that processes of deindustrialization may be causally linked to unexplained geographical disparities in levels of physical activity. While the sociocultural correlates of physical activity have been well studied, and prior conceptual frameworks have been developed to explain more general patterns of activity, none have explicitly attempted to identify the components of industrial change that may impact physical activity. In this work we review the current literature on sociocultural correlates of health behaviors before using a case study centered on the United Kingdom to present a novel framework that links industrial change to declining levels of physical activity. We developed a comprehensive model linking sociocultural correlates of physical activity to processes associated with industrial restructuring and discuss implication for policy and practice. A better understanding of sociocultural processes may help to ameliorate adverse health consequences of employment decline in communities that have experienced substantial losses of manual employment.

Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

PubMed

Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

2013-01-05

Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

Using intervention mapping to develop a work-related guidance tool for those affected by cancer

PubMed Central

2013-01-01

Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based. PMID:23289708

Employment Maintenance and Intimate Partner Violence.

PubMed

Borchers, Andrea; Lee, Rebecca C; Martsolf, Donna S; Maler, Jeff

2016-05-18

Intimate partner violence (IPV) is a major public health problem in the United States. Negative outcomes of IPV affect women's attainment and maintenance of employment. The purpose of this study was to develop a theoretical framework that described and explained the process by which women who have experienced IPV attain and maintain employment. Grounded theory methodology was used to analyze interviews of 34 women who had experienced IPV. Analysis suggested that women who had experienced IPV could attain employment; however, they had difficulty maintaining employment. Entanglement of work and IPV was experienced by all 34 participants because of the perpetrator controlling their appearance, sabotaging their work, interfering with their work, or controlling their finances. Some women described ways in which they disentangled work from IPV through a dynamic unraveling process, with periods of re-entanglement, resulting in job security and satisfaction. © 2016 The Author(s).

Creating an Effective Strategic Plan for the School District

ERIC Educational Resources Information Center

Lane, Randy J.; Bishop, Harold L.; Wilson-Jones, Linda

2005-01-01

The purpose of this study was to examine the process of developing a strategic plan for school districts through communication and involvement of all stakeholders. This process takes into consideration the diverse concerns and principles; supports scholarly and coherent decision making; and employs the development of a strategic plan through both…

Towards a Sufficient Theory of Transition in Cognitive Development.

ERIC Educational Resources Information Center

Wallace, J. G.

The work reported aims at the construction of a sufficient theory of transition in cognitive development. The method of theory construction employed is computer simulation of cognitive process. The core of the model of transition presented comprises self-modification processes that, as a result of continuously monitoring an exhaustive record of…

Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

Promoting evidence informed policy making in Nigeria: a review of the maternal, newborn and child health policy development process

PubMed Central

Uneke, Chigozie Jesse; Sombie, Issiaka; Keita, Namoudou; Lokossou, Virgil; Johnson, Ermel; Ongolo-Zogo, Pierre; Uro-Chukwu, Henry Chukwuemeka

2017-01-01

Background: There is increasing recognition worldwide that health policymaking process should be informed by best available evidence. The purpose of this study was to review the policy documents on maternal, newborn and child health (MNCH) in Nigeria to assess the extent evidence informed policymaking mechanism was employed in the policy formulation process. Methods: A comprehensive literature search of websites of the Federal Ministry of Health(FMOH) Nigeria and other related ministries and agencies for relevant health policy documents related to MNCH from year 2000 to 2015 was undertaken. The following terms were used interchangeably for the literature search: maternal, child, newborn, health, policy, strategy,framework, guidelines, Nigeria. Results: Of the 108 policy documents found, 19 (17.6%) of them fulfilled the study inclusion criteria. The policy documents focused on the major aspects of maternal health improvements in Nigeria such as reproductive health, anti-malaria treatment, development of adolescent and young people health, mid wives service scheme, prevention of mother to child transmission of HIV and family planning. All the policy documents indicated that a consultative process of collection of input involving multiple stakeholders was employed, but there was no rigorous scientific process of assessing, adapting, synthesizing and application of scientific evidence reported in the policy development process. Conclusion: It is recommended that future health policy development process on MNCH should follow evidence informed policy making process and clearly document the process of incorporating evidence in the policy development. PMID:29085794

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

PubMed Central

Salazar, Jaime; Müller, Rainer H.; Möschwitzer, Jan P.

2014-01-01

Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals. PMID:26556191

20 CFR 670.545 - How does Job Corps ensure that students receive due process in disciplinary actions?

Code of Federal Regulations, 2010 CFR

2010-04-01

... receive due process in disciplinary actions? 670.545 Section 670.545 Employees' Benefits EMPLOYMENT AND... process in disciplinary actions? The center operator must ensure that all students receive due process in disciplinary proceedings according to procedures developed by the Secretary. These procedures must include, at...

ELECTRONIC TECHNICIAN PERSONNEL AND TRAINING NEEDS OF IOWA INDUSTRIES.

ERIC Educational Resources Information Center

WEEDE, GARY DEAN

THE PURPOSE OF THIS STUDY WAS TO PROVIDE DATA FOR USE IN DEVELOPING OR IMPROVING ELECTRONIC TECHNOLOGY PROGRAMS. A POSTAL CARD QUESTIONNAIRE WAS SENT TO 678 MANUFACTURING AND PROCESSING INDUSTRIES IN IOWA EMPLOYING MORE THAN 50 PERSONS AND ALL ELECTRICAL, ELECTRONIC, AND PRECISION INSTRUMENT MANUFACTURERS EMPLOYING FEWER THAN 50 PERSONS. DATA WERE…

The Perceived Benefits of Paid Employment to Women in Working Class Jobs.

ERIC Educational Resources Information Center

Walshok, Mary Lindenstein

A two-year longitudinal study of 200 working women in California urban areas represents an effort to understand the processes by which specific interests and commitments to paid employment develop. Data from intensive personal interviews with women in traditional and nontraditional occupations should indicate factors which facilitate the entry of…

Emotional Intelligence and Life Adjustment for Nigerian Secondary Students

ERIC Educational Resources Information Center

Ogoemeka, Obioma Helen

2013-01-01

In the process of educating adolescents, good emotional development and life adjustment are two significant factors for teachers to know. This study employed random cluster sampling of senior secondary school students in Ondo and Oyo States in south-western Nigeria. The Random sampling was employed to select 1,070 students. The data collected were…

Developing and Implementing an Undergraduate Finance Capstone Course for Both Onground and Online Course Delivery

ERIC Educational Resources Information Center

Wiechowski, Linda S.

2010-01-01

Capstone courses provide an opportunity to integrate several topics and to help prepare students for the real world. This paper examines the process of developing an undergraduate finance capstone course for both onground (face-to-face) and online course delivery. The process begins with the determination of the core competencies employers require…

The Development of Emotion-Processing in Children: Effects of Age, Emotion, and Intensity

ERIC Educational Resources Information Center

Herba, Catherine M.; Landau, Sabine; Russell, Tamara; Ecker, Christine; Phillips, Mary L.

2006-01-01

Background: This study examined the effects of age and two novel factors (intensity and emotion category) on healthy children's developing emotion-processing from 4 to 15 years using two matching paradigms. Methods: An explicit emotion-matching task was employed in which children matched the emotion of a target individual, and an implicit task…

Survey Instrument Validity Part I: Principles of Survey Instrument Development and Validation in Athletic Training Education Research

ERIC Educational Resources Information Center

Burton, Laura J.; Mazerolle, Stephanie M.

2011-01-01

Context: Instrument validation is an important facet of survey research methods and athletic trainers must be aware of the important underlying principles. Objective: To discuss the process of survey development and validation, specifically the process of construct validation. Background: Athletic training researchers frequently employ the use of…

Developmental Implications of the Levels of Processing Memory Framework.

ERIC Educational Resources Information Center

Naus, Mary J.

The levels of processing framework for understanding memory development has generated little empirical or theoretical work that furthers an understanding of the developmental memory system. Although empirical studies by those testing the levels of processing framework have demonstrated that mnemonic strategies employed by children are the critical…

A Method for Achieving Reciprocity of Funding in Community-Based Participatory Research

PubMed Central

Gehlert, Sarah; Fayanju, Oluwadamilola M.; Jackson, Sherrill; Kenkel, Sandi; McCullough, Isaac C.; Oliver, Cheryl; Sanford, Mark

2015-01-01

Background The St. Louis Komen Project was conceived to address disparities in breast cancer treatment and outcomes between African-American and White women in St. Louis, Missouri. Our goal was to apportion tasks and funding through a process to which all researcher partners had input and to which all could agree, thus eliminating institutionalized inequalities. Methods This paper describes the collaborative process and resulting division of responsibilities, determination of costs, and ultimate allocation of funds and resources, as well as the documentation employed to achieve funding reciprocity and equal accountability. Results Both communication and documentation are critical. Although the Memoranda of Understanding employed are not a panacea, they codify roles and expectations and promote trust. The process of developing financial transparency set the tone for subsequent steps in the research process. Conclusions The exhaustive planning process and project-specific procedures developed by its partners have helped the project foster reciprocity, facilitate participation, and equitably distribute resources. PMID:25727989

Technical and Soft Skills Expectations During the Transition from Recent Graduate to New Hire

NASA Astrophysics Data System (ADS)

Keane, C. M.

2001-12-01

Employer-applicant skill compatibility represents a major component of the career development process, particularly for new entrants to the job market. Newly minted geoscientists largely bring a distinct set of skills learned during their formal education and training, which combined with a broader view of the person are evaluated for career potential in today's major employers. University departments possess a strong view of their role in educating future geoscientists, including the skill sets imparted, the basis of education provided, and the expectation for how their students will evolve into colleagues in the profession. Regretfully, based on numerous surveys by both the American Geological Institute's Human Resources program and other independent studies, the formally transferred skills and expectations do not necessarily match those of many geoscience employers. While academia has increased its focus on increasing technical skills and greater specialization, most geoscience employers have further increased the technology gap between themselves and academia, leading most employers to seek broadly trained and well-educated graduates. Additionally, soft skills represent an area of major disagreement between what is considered important and what is considered feasible in a formal education. While debate continues both within industry and academia over the ideal set of soft skills, the great variance in soft skill demands lead to better opportunities for matching of graduate to employer. This debate further enhances the ongoing discussion of the role of the university, the importance of employer needs, and the health of the geoscience discipline within society. Fundamentally, the hiring and career development process remains as sequence of compromises for both the employer and the recent graduate.

Developing Customized Programs for Steel and Other Heavy Industries.

ERIC Educational Resources Information Center

Day, Philip R., Jr.

1984-01-01

Describes Dundalk Community College's (DCC's) customized training programs for local industries. Looks at employment problems and outlook in Baltimore County, the development of a training agreement with Bethlehem Steel, the use of the Developing a Curriculum (DACUM) process to develop skill profiles, and future directions. (DMM)

Senior Managers' and Recent Graduates' Perceptions of Employability Skills for Health Services Management

ERIC Educational Resources Information Center

Messum, Diana; Wilkes, Lesly; Peters, Cath; Jackson, Debra

2017-01-01

If work-integrated learning (WIL) is intended by universities to meet the demand for work-ready graduates, identification of skill requirements for development on placements is a critical part of the learning process. Health services management specific employability skills perceived to be important by managers and recent graduates working in the…

User-Centered Innovation: A Model for "Early Usability Testing."

ERIC Educational Resources Information Center

Sugar, William A.; Boling, Elizabeth

The goal of this study is to show how some concepts and techniques from disciplines outside Instructional Systems Development (ISD) have the potential to extend and enhance the traditional view of ISD practice when they are employed very early in the ISD process. The concepts and techniques employed were user-centered in design and usability, and…

Large-Scale Professional Development towards Emancipatory Mathematics: The Genesis of YuMi Deadly Maths

ERIC Educational Resources Information Center

Cooper, Tom; Carter, Merilyn

2016-01-01

This paper describes the genesis of YuMi Deadly Maths, a school change process that has been used in over 200 schools to develop mathematics teaching and learning to improve students' employment and life chances. The paper discusses the YuMi Deadly Maths approach to mathematics content and pedagogy, implemented through a process of PD and school…

An overview of the model integration process: From pre ...

EPA Pesticide Factsheets

Integration of models requires linking models which can be developed using different tools, methodologies, and assumptions. We performed a literature review with the aim of improving our understanding of model integration process, and also presenting better strategies for building integrated modeling systems. We identified five different phases to characterize integration process: pre-integration assessment, preparation of models for integration, orchestration of models during simulation, data interoperability, and testing. Commonly, there is little reuse of existing frameworks beyond the development teams and not much sharing of science components across frameworks. We believe this must change to enable researchers and assessors to form complex workflows that leverage the current environmental science available. In this paper, we characterize the model integration process and compare integration practices of different groups. We highlight key strategies, features, standards, and practices that can be employed by developers to increase reuse and interoperability of science software components and systems. The paper provides a review of the literature regarding techniques and methods employed by various modeling system developers to facilitate science software interoperability. The intent of the paper is to illustrate the wide variation in methods and the limiting effect the variation has on inter-framework reuse and interoperability. A series of recommendation

23 CFR 450.306 - Scope of the metropolitan transportation planning process.

Code of Federal Regulations, 2010 CFR

2010-04-01

...: (1) Support the economic vitality of the metropolitan area, especially by enabling global... transportation improvements and State and local planned growth and economic development patterns; (6) Enhance the... transportation system development, land use, employment, economic development, human and natural environment, and...

[Economic development and married women's employment in Taiwan: a study of female marginalization].

PubMed

Lu, Y

1994-07-01

As in other developing countries, the industrial development in Taiwan seems to marginalize female workers. This study tries to examine the trend of women's employment status, using both macro- and micro-level data. The statistics suggest that female employment had significantly declined during the early stages of industrialization. Although rapid economic development has expanded women's job opportunities, most women are concentrated in lower-status jobs and the informal sector. Informal employment is especially prevalent among married women. In the micro-level analysis the study examines the factors that led to the marginalization of women's labor force. The empirical analysis applies a multinomial logistic model to a 1980 KAP (knowledge, attitude, and practice) survey sample of 3859 married women. The results suggest that married women's work patterns in terms of formal vs. informal employment are determined by the family organization rather than by labor market conditions. Wives from families with small businesses are more likely to be involved in informal employment. Wives also tend to work informally when they have young children. On the other hand, the effects of labor market conditions are mediated by the types of family economy. Therefore the women's informal employment in Taiwan, as a characteristic of female marginalization, is the result of the sexual division of labor in the family organization and the prevalence of the family business, rather than that of being excluded into the marginal forms of employment through the process of capitalistic production, as argued by the female marginalization theorists.

The role of NASA for aerospace information

NASA Technical Reports Server (NTRS)

Chandler, G. P., Jr.

1980-01-01

The NASA Scientific and Technical Information Program operations are performed by two contractor operated facilities. The NASA STI Facility, located near Baltimore, Maryland, employs about 210 people who process report literature, operate the computer complex, and provide support for software maintenance and developments. A second contractor, the Technical Information Services of the American Institute of Aeronautics and Astronautics, employs approximately 80 people in New York City and processes the open literature such as journals, magazines, and books. Features of these programs include online access via RECON, announcement services, and international document exchange.

24 CFR 91.300 - General.

Code of Federal Regulations, 2014 CFR

2014-04-01

... significant aspects of the process by which the consolidated plan was developed; (2) The identity of the agencies, groups, organizations, and others who participated in the process; (3) The State's consultations... services, employment, or education needs of low-income individuals and families, homeless individuals and...

24 CFR 91.300 - General.

Code of Federal Regulations, 2012 CFR

2012-04-01

... significant aspects of the process by which the consolidated plan was developed; (2) The identity of the agencies, groups, organizations, and others who participated in the process; (3) The State's consultations... services, employment, or education needs of low-income individuals and families, homeless individuals and...

24 CFR 91.300 - General.

Code of Federal Regulations, 2013 CFR

2013-04-01

... significant aspects of the process by which the consolidated plan was developed; (2) The identity of the agencies, groups, organizations, and others who participated in the process; (3) The State's consultations... services, employment, or education needs of low-income individuals and families, homeless individuals and...

Displacement Models for THUNDER Actuators having General Loads and Boundary Conditions

NASA Technical Reports Server (NTRS)

Wieman, Robert; Smith, Ralph C.; Kackley, Tyson; Ounaies, Zoubeida; Bernd, Jeff; Bushnell, Dennis M. (Technical Monitor)

2001-01-01

This paper summarizes techniques for quantifying the displacements generated in THUNDER actuators in response to applied voltages for a variety of boundary conditions and exogenous loads. The PDE (partial differential equations) models for the actuators are constructed in two steps. In the first, previously developed theory quantifying thermal and electrostatic strains is employed to model the actuator shapes which result from the manufacturing process and subsequent repoling. Newtonian principles are then employed to develop PDE models which quantify displacements in the actuator due to voltage inputs to the piezoceramic patch. For this analysis, drive levels are assumed to be moderate so that linear piezoelectric relations can be employed. Finite element methods for discretizing the models are developed and the performance of the discretized models are illustrated through comparison with experimental data.

Carpal Tunnel Syndrome

MedlinePlus

... worker's wrist to maintain a natural position during work. Jobs can be rotated among workers. Employers can develop programs in ergonomics, the process of adapting workplace conditions and job ...

Development of gas-pressure bonding process for air-cooled turbine blades

NASA Technical Reports Server (NTRS)

Meiners, K. E.

1972-01-01

An investigation was conducted on the application of gas-pressure bonding to the joining of components for convectively cooled turbine blades and vanes. A processing procedure was established for joining the fins of Udimet 700 and TD NiCr sheet metal airfoil shells to cast B1900 struts without the use of internal support tooling. Alternative methods employing support tooling were investigated. Testing procedures were developed and employed to determine shear strengths and internal burst pressures of flat and cylindrical bonded finned shell configurations at room temperature and 1750 F. Strength values were determined parallel and transverse to the cooling fin direction. The effect of thermal cycles from 1750 F to room temperature on strength was also investigated.

23 CFR 450.306 - Scope of the metropolitan transportation planning process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... transportation improvements and State and local planned growth and economic development patterns; (6) Enhance the... transportation system development, land use, employment, economic development, human and natural environment, and... CFR part 940. (g) Preparation of the coordinated public transit-human services transportation plan, as...

Dialogic Spaces: A Critical Policy Development Perspective of Educational Leadership Qualifications

ERIC Educational Resources Information Center

Smith, Déirdre; Kelly, Darron; Allard, Carson

2017-01-01

The critical exploration of policy development processes employed to construct leadership qualifications is the focus of this inquiry. This exploration is made through specific application of the necessary conditions of Habermasian "practical discourse" to current dialogic procedures used to develop policies for principal, supervisory…

Image Processing System

NASA Technical Reports Server (NTRS)

1986-01-01

Mallinckrodt Institute of Radiology (MIR) is using a digital image processing system which employs NASA-developed technology. MIR's computer system is the largest radiology system in the world. It is used in diagnostic imaging. Blood vessels are injected with x-ray dye, and the images which are produced indicate whether arteries are hardened or blocked. A computer program developed by Jet Propulsion Laboratory known as Mini-VICAR/IBIS was supplied to MIR by COSMIC. The program provides the basis for developing the computer imaging routines for data processing, contrast enhancement and picture display.

Investing in Youth: Tunisia. "Strengthening the Employability of Youth during the Transition to a Green Economy"

ERIC Educational Resources Information Center

OECD Publishing, 2015

2015-01-01

The series Investing in Youth builds on the expertise of the Organisation for Economic Cooperation and Development (OECD) on youth employment, social support and skills. It covers both OECD countries and countries in the process of accession to the OECD, as well as some emerging economies. This report provides a detailed diagnosis of the youth…

Delegation--A Fundamental Management Process.

ERIC Educational Resources Information Center

Rees, Ruth

Administrators may employ delegation to perform work effectively, increase their own effectiveness, and advance the development of subordinates through job enrichment. The steps in the delegation process include task identification, assessment of skills necessary to execute the task, selection of the subordinate for the task, communication of the…

A Competency-Based Instructional Program for Plant Process Operations.

ERIC Educational Resources Information Center

McDaniel, Joy; Mills, Steven

This program guide provides materials to prepare learners for employment as Process Plant Operators through classroom instruction and practical shop experience. Contents include instructional goal and subgoals, an instructional analysis that describes development of the materials and instructional equipment and supplies and facilities…

Entrepreneurship. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for entrepreneurship. The list contains units (with and without subunits), competencies, and competency builders that…

Choosing employment: factors that impact employment decisions for individuals with intellectual disability.

PubMed

Timmons, Jaimie Ciulla; Hall, Allison Cohen; Bose, Jennifer; Wolfe, Ashley; Winsor, Jean

2011-08-01

Little is known about the factors that shape the employment-related decisions of individuals with intellectual and/or developmental disabilities. Findings from qualitative interviews with individuals, their family members, and employment-support professionals from four community rehabilitation providers throughout Massachusetts were reported. Recognizing the value of participatory action research, we also included a co-researcher with intellectual disability who participated in all facets of the research process. Findings revealed a collection of people and factors considered influential in employment-related decision-making. The family in the formative years, school-based staff and early employment experiences, the culture of the community rehabilitation providers, the job developer, and personal preferences all influenced participants' decisions. Through understanding these persuasive elements, we offer recommendations to those in the intellectual and developmental disabilities field to optimize employment choices and outcomes.

Work Keys: Developing the Assessments.

ERIC Educational Resources Information Center

McLarty, Joyce R.

The American College Testing Program is developing a new program, Work Keys, a system to develop and assess employability skills. It consists of four components: (1) a systematic process for profiling job skill requirements; (2) assessments that measure learners' job skill levels; (3) procedures and formats for conveying assessment results so they…

Globalization and Industrialization in 64 Developing Countries, 1980-2003

ERIC Educational Resources Information Center

Kaya, Yunus

2010-01-01

This study investigates the effect of the latest wave of economic globalization on manufacturing employment in developing countries. It revisits the classic debate on the effect of internal and external influences on industrialization, and extends this debate to contemporary developing countries. In the process, it assesses the evidence for…

Lexical Development during Middle Infancy: A Mutually Driven Infant-Caregiver Process.

ERIC Educational Resources Information Center

Dunham, Philip; Dunham, Frances

1992-01-01

Mothers' utterances were measured during interactions with their 13-month-old infants and correlated with measures of infants' productive lexical development at 13 and 24 months. Correlations between maternal measures and infants' lexical development were lower for employed mothers than for mothers who were full-time caregivers. (BC)

The Development and Structure of Professional Examinations Planned for National Use.

ERIC Educational Resources Information Center

Hecht, James T.

The process typically employed by testing services in developing professional tests for national use is described: (1) determination of professional standards; (2) development of test specifications; (3) test construction; (4) test registration and administration; and (5) scoring, analysis, and reporting. To determine professional standards, input…

Development and Experimental Validation of a Thermoelectric Test Bench for Laboratory Lessons

ERIC Educational Resources Information Center

Rodríguez García, Antonio; Astrain Ulibarrena, David; Martínez Echeverri, Álvaro; Aranguren Garacochea, Patricia; Pérez Artieda, Gurutze

2013-01-01

The refrigeration process reduces the temperature of a space or a given volume while the power generation process employs a source of thermal energy to generate electrical power. Because of the importance of these two processes, training of engineers in this area is of great interest. In engineering courses it is normally studied the vapor…

Using Information from the Electronic Health Record to Improve Measurement of Unemployment in Service Members and Veterans with mTBI and Post-Deployment Stress

PubMed Central

Dillahunt-Aspillaga, Christina; Finch, Dezon; Massengale, Jill; Kretzmer, Tracy; Luther, Stephen L.; McCart, James A.

2014-01-01

Objective The purpose of this pilot study is 1) to develop an annotation schema and a training set of annotated notes to support the future development of a natural language processing (NLP) system to automatically extract employment information, and 2) to determine if information about employment status, goals and work-related challenges reported by service members and Veterans with mild traumatic brain injury (mTBI) and post-deployment stress can be identified in the Electronic Health Record (EHR). Design Retrospective cohort study using data from selected progress notes stored in the EHR. Setting Post-deployment Rehabilitation and Evaluation Program (PREP), an in-patient rehabilitation program for Veterans with TBI at the James A. Haley Veterans' Hospital in Tampa, Florida. Participants Service members and Veterans with TBI who participated in the PREP program (N = 60). Main Outcome Measures Documentation of employment status, goals, and work-related challenges reported by service members and recorded in the EHR. Results Two hundred notes were examined and unique vocational information was found indicating a variety of self-reported employment challenges. Current employment status and future vocational goals along with information about cognitive, physical, and behavioral symptoms that may affect return-to-work were extracted from the EHR. The annotation schema developed for this study provides an excellent tool upon which NLP studies can be developed. Conclusions Information related to employment status and vocational history is stored in text notes in the EHR system. Information stored in text does not lend itself to easy extraction or summarization for research and rehabilitation planning purposes. Development of NLP systems to automatically extract text-based employment information provides data that may improve the understanding and measurement of employment in this important cohort. PMID:25541956

Critical Care Dialysis System

NASA Technical Reports Server (NTRS)

1992-01-01

Organon Teknika Corporation's REDY 2000 dialysis machine employs technology originally developed under NASA contract by Marquardt Corporation. The chemical process developed during the project could be applied to removing toxic waste from used dialysis fluid. This discovery led to the development of a kidney dialysis machine using "sorbent" dialysis, a method of removing urea from human blood by treating a dialysate solution. The process saves electricity and, because the need for a continuous water supply is eliminated, the patient has greater freedom.

Practical Nursing. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for practical nursing. The list contains units (with and without subunits), competencies, and competency builders that…

Animal Management Technician. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for animal management technician occupations. The list contains units (with and without subunits), competencies, and…

Dental Assistant. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for dental assistants. The list contains units (with and without subunits), competencies, and competency builders that…

General Marketing. Ohio's Competency Analysis Profile. Revised.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for general marketing occupations. The list contains units (with and without subunits), competencies, and competency…

Carpentry. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 14 units (with or without subunits), competencies, and competency builders that identify the occupational,…

Industrial Maintenance. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for industrial maintenance occupations. The list contains units (with and without subunits), competencies, and competency…

Masonry. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for masonry occupations. The list contains units (with and without subunits), competencies, and competency builders that…

Power Equipment Technology. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for power equipment technology occupations. The list contains units (with and without subunits), competencies, and…

Electrical Trades. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for electrical trades. The list contains units (with and without subunits), competencies, and competency builders that…

Agriculture Products Processing. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

Resource Conservation. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for resource conservation occupations. The list contains units (with and without subunits), competencies, and competency…

Cosmetology. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 17 units (with or without subunits), competencies, and competency builders that identify the occupational,…

An advanced technique for the prediction of decelerator system dynamics.

NASA Technical Reports Server (NTRS)

Talay, T. A.; Morris, W. D.; Whitlock, C. H.

1973-01-01

An advanced two-body six-degree-of-freedom computer model employing an indeterminate structures approach has been developed for the parachute deployment process. The program determines both vehicular and decelerator responses to aerodynamic and physical property inputs. A better insight into the dynamic processes that occur during parachute deployment has been developed. The model is of value in sensitivity studies to isolate important parameters that affect the vehicular response.

Government Microelectronics Assessment for Trust (GOMAT)

NASA Technical Reports Server (NTRS)

Berg, Melanie D.; LaBel, Kenneth A.

2018-01-01

NASA Electronic Parts and Packaging (NEPP) is developing a process to be employed in critical applications. The framework assesses levels of trust and assurance in microelectronic systems. The process is being created with participation from a variety of organizations. We present a synopsis of the framework that includes contributions from The Aerospace Corporation.

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

EPA Treatability Database Digs Deep for Data on Drinking Water Contaminants and Treatment Processes

EPA Science Inventory

The TDB is an interactive database that was initially developed in 2006-2007. The TDB currently contains more than 60 regulated and unregulated contaminants and 28 treatment processes that are known to be effective and are commonly employed at drinking water utilities. TDB lite...

The Philippine System of Education: Some Implications to Agricultural Education.

ERIC Educational Resources Information Center

Mancebo, Samuel T.

The Philippine educational system views education as a human development resource conversion process that can maximize the realization of the national developmental goals. Students comprise the principal input of this manpower resource conversion process. The output is individuals who can find useful and productive employment. Two broad strategies…

Structured Interviews: Developing Interviewing Skills in Human Resource Management Courses

ERIC Educational Resources Information Center

Doll, Jessica L.

2018-01-01

Structured interviews are widely used in the employment process; however, students often have little experience asking and responding to structured interview questions. In a format similar to "speed dating," this exercise actively engages students in the interview process. Students pair off to gain experience as an interviewer by asking…

ASIC/FPGA Trust Assessment Framework

NASA Technical Reports Server (NTRS)

Berg, Melanie

2018-01-01

NASA Electronic Parts and Packaging (NEPP) is developing a process to be employed in critical applications. The framework assesses levels of Trust and assurance in microelectronic systems. The process is being created with participation from a variety of organizations. We present a synopsis of the framework that includes contributions from The Aerospace Corporation.

Challenges Faced by Development Partners in Supporting the Growth and Development of Commercial Enterprises in Lira District, Northern Uganda

ERIC Educational Resources Information Center

Eton, Marus; Mwirumubi, Richard; Edaku, Charles

2017-01-01

Entrepreneurship is defined as the process where an individual discovers, evaluates and exploit opportunities independently. Most countries have embraced entrepreneurship development as ways of creating employment and economic growth and development. The objective of the study was to examine the challenges faced by commercial enterprises in Lira…

Focus on motivation in the work rehabilitation planning process: a qualitative study from the employer's perspective.

PubMed

Gard, Gunvor; Larsson, Agneta

2003-09-01

Since the working environment act was passed in 1991, employers in Sweden are to plan and control the working environment conditions in workplaces. They are responsible for organized rehabilitation at the workplace including the development of rehabilitation plans and a plan for interventions in order for a sick-listed client to be able to return to work. The aim of this study was to describe employers' experiences of how motivation can be improved in a work rehabilitation process. Qualitative interviews were performed with 10 employers who had employees that had taken part in a period of vocational rehabilitation at a rehabilitation center in the north of Sweden, over a 2-year period. The result showed that increased focus on motivation for change is needed in work rehabilitation. The clients' motivation for change could be improved by a focus on motivational conversations at the workplace aiming at motivation for change in their working and living conditions. The employers' power of initiative, competence, economic resources, and motivation are needed for creative solutions at the workplace.

Sustained employability of workers in a production environment: design of a stepped wedge trial to evaluate effectiveness and cost-benefit of the POSE program.

PubMed

van Holland, Berry J; de Boer, Michiel R; Brouwer, Sandra; Soer, Remko; Reneman, Michiel F

2012-11-20

Sustained employability and health are generating awareness of employers in an aging and more complex work force. To meet these needs, employers may offer their employees health surveillance programs, to increase opportunities to work on health and sustained employability. However, evidence for these health surveillance programs is lacking. The FLESH study (Functional Labour Evaluation for Sustained Health and employment) was developed to evaluate a comprehensive workers' health promotion program on its effectiveness, cost-benefit, and process of the intervention. The study is designed as a cluster randomised stepped wedge trial with randomisation at company plant level and is carried out in a large meat processing company. Every contracted employee is offered the opportunity to participate in the POSE program (Promotion Of Sustained Employability). The main goals of the POSE program are 1) providing employee's insight into their current employability and health status, 2) offering opportunities to improve employability and decrease health risks and 3) improving employability and health sustainably in order to keep them healthy at work. The program consists of a broad assessment followed by a counselling session and, if needed, a tailored intervention. Measurements will be performed at baseline and will be followed up at 20, 40, 60, 80, 106 and 132 weeks. The primary outcome measures are work ability, productivity and absenteeism. Secondary outcomes include health status, vitality, and psychosocial workload. A cost-benefit study will be conducted from the employers' perspective. A process evaluation will be conducted and the satisfaction of employer and employees with the program will be assessed. This study provides information on the effectiveness of the POSE program on sustained employment. When the program proves to be effective, employees benefit by improved work ability, and health. Employers benefit from healthier employees, reduced sick leave (costs) and higher productivity. The study can expose key elements for a successful implementation and execution of the POSE program and may serve as an example to other companies inside and outside the industry. The trial is registered at the Dutch Trial Register (http://www.trialregister.nl): NTR3445.

Dealing with resistance in temporary agency nurses. The role of fear in identity-building processes.

PubMed

Cicellin, Mariavittoria; Pezzillo Iacono, Mario; Berni, Alessia; Esposito, Vincenza

2015-01-01

The purpose of this paper is to interpret employees' resistance using the perspective of a Foucaultian/post-structuralist approach in critical management studies. The authors examine the relationship between management of diversity, based on employment contract, emotional construction of identity and processes of resistance. The authors explore the ways in which temporary agency nurses understand and experience their contract, respond to tensions regarding temporary employment, develop collective emotions and show processes of resistance. The study adopted an interpretive and qualitative approach. The authors analysed empirical material collected in the Haematology Department of a hospital in Naples, Italy, to illustrate actual experiences in the workplace. Fear turns out to be the discursive resource through which resistance is actually exerted. Through emotions, temporary nurses build a community of coping and enhance their collective identity. They use fear to develop solidarity and to mobilize collective resistance in the workplace. Although no traditional resistance behaviours are reported, they aim to undermine the reputation of top managers and challenge and re-write the prevailing discourses of the organization. The paper contributes to the critical literature because the authors analysed a relationship that is rarely theoretically and empirically examined in literature, that between employment contract, collective identity-building dynamics and processes of resistance. We showed that the creation of a community of coping enabled minorities to voice their distance from and opposition to management.

Recovery of Multilayer-Coated Zerodur and ULE Optics for Extreme-Ultraviolet Lithography by Recoating, Reactive-Ion Etching, and Wet-Chemical Processes.

PubMed

Mirkarimi, P B; Baker, S L; Montcalm, C; Folta, J A

2001-01-01

Extreme-ultraviolet lithography requires expensive multilayer-coated Zerodur or ULE optics with extremely tight figure and finish specifications. Therefore it is desirable to develop methods to recover these optics if they are coated with a nonoptimum multilayer films or in the event that the coating deteriorates over time owing to long-term exposure to radiation, corrosion, or surface contamination. We evaluate recoating, reactive-ion etching, and wet-chemical techniques for the recovery of Mo/Si and Mo/Be multilayer films upon Zerodur and ULE test optics. The recoating technique was successfully employed in the recovery of Mo/Si-coated optics but has the drawback of limited applicability. A chlorine-based reactive-ion etch process was successfully used to recover Mo/Si-coated optics, and a particularly large process window was observed when ULE optics were employed; this is an advantageous for large, curved optics. Dilute HCl wet-chemical techniques were developed and successfully demonstrated for the recovery of Mo/Be-coated optics as well as for Mo/Si-coated optics when Mo/Be release layers were employed; however, there are questions about the extendability of the HCl process to large optics and multiple coat and strip cycles. The technique of using carbon barrier layers to protect the optic during removal of Mo/Si in HF:HNO(3) also showed promise.

Business Administration and Management. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains eight units (with or without subunits), competencies, and competency builders that identify the…

Agricultural/Industrial Mechanical Technician. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural/industrial mechanical technician occupations. The list contains units (with and without subunits),…

Nurse Aide. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for nurses' aides. The list contains units (with and without subunits), competencies, and competency builders that identify…

Travel and Tourism Marketing. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for travel and tourism occupations. The list contains units (with and without subunits), competencies, and competency…

Commercial Art. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 16 units (with or without subunits), competencies, and competency builders that identify the occupational,…

Crop Producer. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains six units (with or without subunits), competencies, and competency builders that identify the occupational,…

Auto Mechanics. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 11 units (with or without subunits), competencies, and competency builders that identify the occupational,…

Building and Property Maintenance. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for building and property maintenance occupations. The list contains units (with and without subunits), competencies, and…

Forest Industry Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for forest industry occupations. The list contains units (with and without subunits), competencies, and competency builders…

Floriculture and Greenhouse Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for floriculture and greenhouse occupations. The list contains units (with and without subunits), competencies, and…

5 CFR 2640.203 - Miscellaneous exemptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... develop recommendations for new standards for AIDS vaccine trials involving human subjects. Even though the chemist's employer is in the process of developing an experimental AIDS vaccine and therefore will..., in advance, authority to make such approvals in accordance with agency policy. Example 4: A GS-14...

5 CFR 2640.203 - Miscellaneous exemptions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... develop recommendations for new standards for AIDS vaccine trials involving human subjects. Even though the chemist's employer is in the process of developing an experimental AIDS vaccine and therefore will..., in advance, authority to make such approvals in accordance with agency policy. Example 4: A GS-14...

5 CFR 2640.203 - Miscellaneous exemptions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... develop recommendations for new standards for AIDS vaccine trials involving human subjects. Even though the chemist's employer is in the process of developing an experimental AIDS vaccine and therefore will..., in advance, authority to make such approvals in accordance with agency policy. Example 4: A GS-14...

Hybrid-PIC Computer Simulation of the Plasma and Erosion Processes in Hall Thrusters

NASA Technical Reports Server (NTRS)

Hofer, Richard R.; Katz, Ira; Mikellides, Ioannis G.; Gamero-Castano, Manuel

2010-01-01

HPHall software simulates and tracks the time-dependent evolution of the plasma and erosion processes in the discharge chamber and near-field plume of Hall thrusters. HPHall is an axisymmetric solver that employs a hybrid fluid/particle-in-cell (Hybrid-PIC) numerical approach. HPHall, originally developed by MIT in 1998, was upgraded to HPHall-2 by the Polytechnic University of Madrid in 2006. The Jet Propulsion Laboratory has continued the development of HPHall-2 through upgrades to the physical models employed in the code, and the addition of entirely new ones. Primary among these are the inclusion of a three-region electron mobility model that more accurately depicts the cross-field electron transport, and the development of an erosion sub-model that allows for the tracking of the erosion of the discharge chamber wall. The code is being developed to provide NASA science missions with a predictive tool of Hall thruster performance and lifetime that can be used to validate Hall thrusters for missions.

A Workforce Development Systems Model for Unemployed Job Seekers

ERIC Educational Resources Information Center

Holland, Brian

2015-01-01

Workforce development is a set of processes that govern the identification, recruitment, assessment and training of job seekers into employment as well as the maintenance and advancement of these persons in their careers. Given the complexity of what workforce development entails, a systems approach is illustrated to ensure that the broader goal…

What Works and What Doesn't in Career Development Programs.

ERIC Educational Resources Information Center

Stevens, Paul

Career development has become important in organizations struggling with restructuring and its effects on employees. Employees now understand the process as a way to gain employability skills in order to obtain different jobs within their companies or elsewhere. Career development often takes place in workshops, although many people prefer a more…

The Emerging and Employed Worker: Planning for the Strategic Imperative.

ERIC Educational Resources Information Center

Geroy, Gary D.

This paper describes a series of four models around which plans can be developed to determine human development needs. It presents needs assessment models describing the process and participant interaction by which information is gathered to be used in education, training, funding, and/or other human resource development interventions to increase…

Application of LC/MS/MS Techniques to Development of US EPA Standardized Methods for Chemicals of Emerging Concern

EPA Science Inventory

This presentation will describe the U.S. EPA’s drinking water and ambient water method development program in relation to the process employed and the typical challenges encountered in developing standardized LC/MS/MS methods for chemicals of emerging concern. The EPA&rsquo...

Information Technology and Development Series. Volume 2. Informatics and Industrial Development. Proceedings of the International Conference on Policies for Information Processing for Developing Countries Held at Dublin, Ireland on 9-13 March 1981,

DTIC Science & Technology

1982-11-01

Pihilips lIiAO i:l ()(xxsclrn prtixics, tor full -tcsr storagec onr ultra high dkrisit\\ I cad-tirtl digit al optical tiascrl discs, wiul th. fxast rctricx...activity, and hence gain full employment in other sectors of the society. The whole issue of the employment effects of informatics will be taken up later in...mini- and micro-computers and of more or less intelligent peripherals. However, this is still doubtful unless a full compre- hension of the political

The Ohio Cross-Cultural Tobacco Control Alliance: Understanding and Eliminating Tobacco-Related Disparities Through the Integration of Science, Practice, and Policy

PubMed Central

Adhikari, Surendra B.; Clopton, Tracy M.; Oches, Barry; Jensen, Conrado

2010-01-01

Objectives. We examined the development of a process designed to eliminate tobacco-related disparities in the state of Ohio and described how a cross-cultural work group used a multicomponent community planning process to develop capacity to address such disparities. Methods. The community development model was used as a guide in the planning process. We employed a case study, focus groups, and telephone interviews to assess the process and collect data on tobacco use and awareness. We also employed the appreciative inquiry framework to create the organizational design for the Ohio Cross-Cultural Tobacco Control Alliance (CCTCA), which was formed from the cross-cultural work group and charged with addressing tobacco-related disparities in the state. Results. Data on tobacco use and awareness were collected from 13 underserved populations. At the end of the planning process, the CCTCA was initiated along with structural capacity to serve as a new program incubator highlighting tobacco use and awareness levels in these populations. Conclusions. The CCTCA appeared to be an effective way to begin mobilizing agencies serving underserved populations by providing an operational structure to address tobacco-related disparities. The alliance also successfully implemented culturally competent community-based programs and policies to help eliminate disparities. PMID:20147668

The Universal Traveler, A Soft-Systems Guide to: Creativity, Problem Solving, and the Process of Reaching Goals. [Revised Edition.

ERIC Educational Resources Information Center

Koberg, Don; Bagnall, Jim

This publication provides an organizational scheme for a creative problem solving process. The authors indicate that all problems can benefit from the same logical and orderly process now employed to solve many complex problems. The principles remain constant; only specific methods change. Chapter 1 analyzes the development of creativity and fear…

A multiple hypotheses uncertainty analysis in hydrological modelling: about model structure, landscape parameterization, and numerical integration

NASA Astrophysics Data System (ADS)

Pilz, Tobias; Francke, Till; Bronstert, Axel

2016-04-01

Until today a large number of competing computer models has been developed to understand hydrological processes and to simulate and predict streamflow dynamics of rivers. This is primarily the result of a lack of a unified theory in catchment hydrology due to insufficient process understanding and uncertainties related to model development and application. Therefore, the goal of this study is to analyze the uncertainty structure of a process-based hydrological catchment model employing a multiple hypotheses approach. The study focuses on three major problems that have received only little attention in previous investigations. First, to estimate the impact of model structural uncertainty by employing several alternative representations for each simulated process. Second, explore the influence of landscape discretization and parameterization from multiple datasets and user decisions. Third, employ several numerical solvers for the integration of the governing ordinary differential equations to study the effect on simulation results. The generated ensemble of model hypotheses is then analyzed and the three sources of uncertainty compared against each other. To ensure consistency and comparability all model structures and numerical solvers are implemented within a single simulation environment. First results suggest that the selection of a sophisticated numerical solver for the differential equations positively affects simulation outcomes. However, already some simple and easy to implement explicit methods perform surprisingly well and need less computational efforts than more advanced but time consuming implicit techniques. There is general evidence that ambiguous and subjective user decisions form a major source of uncertainty and can greatly influence model development and application at all stages.

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

45 CFR 157.205 - Qualified employer participation process in a SHOP.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Qualified employer participation process in a SHOP... TO HEALTH CARE ACCESS EMPLOYER INTERACTIONS WITH EXCHANGES AND SHOP PARTICIPATION Standards for Qualified Employers § 157.205 Qualified employer participation process in a SHOP. (a) General requirements...

Sustained employability of workers in a production environment: design of a stepped wedge trial to evaluate effectiveness and cost-benefit of the POSE program

PubMed Central

2012-01-01

Background Sustained employability and health are generating awareness of employers in an aging and more complex work force. To meet these needs, employers may offer their employees health surveillance programs, to increase opportunities to work on health and sustained employability. However, evidence for these health surveillance programs is lacking. The FLESH study (Functional Labour Evaluation for Sustained Health and employment) was developed to evaluate a comprehensive workers’ health promotion program on its effectiveness, cost-benefit, and process of the intervention. Methods The study is designed as a cluster randomised stepped wedge trial with randomisation at company plant level and is carried out in a large meat processing company. Every contracted employee is offered the opportunity to participate in the POSE program (Promotion Of Sustained Employability). The main goals of the POSE program are 1) providing employee’s insight into their current employability and health status, 2) offering opportunities to improve employability and decrease health risks and 3) improving employability and health sustainably in order to keep them healthy at work. The program consists of a broad assessment followed by a counselling session and, if needed, a tailored intervention. Measurements will be performed at baseline and will be followed up at 20, 40, 60, 80, 106 and 132 weeks. The primary outcome measures are work ability, productivity and absenteeism. Secondary outcomes include health status, vitality, and psychosocial workload. A cost-benefit study will be conducted from the employers’ perspective. A process evaluation will be conducted and the satisfaction of employer and employees with the program will be assessed. Discussion This study provides information on the effectiveness of the POSE program on sustained employment. When the program proves to be effective, employees benefit by improved work ability, and health. Employers benefit from healthier employees, reduced sick leave (costs) and higher productivity. The study can expose key elements for a successful implementation and execution of the POSE program and may serve as an example to other companies inside and outside the industry. Trial registration The trial is registered at the Dutch Trial Register (http://www.trialregister.nl): NTR3445 PMID:23164366

Heating, Ventilation, Air-conditioning, and Refrigeration. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for heating, ventilation, air conditioning, and refrigeration occupations. The list contains units (with and without…

Sex Equity in Organization Development: Numbers and Processes.

ERIC Educational Resources Information Center

Gall, Joyce P.

To investigate whether the proportion of males to females employed as educational organizational development (OD) practitioners is equitable, sex distribution data from three recent sources are presented in female-male ratios, in categories that define the available talent pool for educational leadership, educational leadership positions, and OD…

Clothing and Interiors, Production and Services. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for occupations in clothing, fashion merchandising, and interior design. The list contains units (with and without…

Child Care Guidance, Management, and Service. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains seven units (with or without subunits), competencies, and competency builders that identify the…

Auto Body and Fender. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 10 units (with or without subunits), competencies, and competency builders that identify the occupational,…

Beef and Sheep Producer. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains 11 units (with or without subunits), competencies, and competency builders that identify the occupational,…

Agricultural Business Feed and Grain Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This comprehensive and verified employer competency list was developed from a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives from Ohio. This competency list contains nine units (with or without subunits), competencies, and competency builders that identify the…

Hospitality and Facility Care Services. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for hospitality and facility care occupations. The list contains units (with and without subunits), competencies, and…

Food Production, Management and Services. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for food production, management, and service occupations. The list contains units (with and without subunits),…

The development of a colour liquid crystal display spatial light modulator and applications in polychromatic optical data processing

NASA Astrophysics Data System (ADS)

Aiken, John Charles

The development of a colour Spatial Light Modulator (SLM) and its application to optical information processing is described. Whilst monochrome technology has been established for many years, this is not the case for colour where commercial systems are unavailable. A main aspect of this study is therefore, how the use of colour can add an additional dimension to optical information processing. A well established route to monochrome system development has been the use of (black and white) liquid crystal televisions (LCTV) as SLM, providing useful performance at a low-cost. This study is based on the unique use of a colour display removed from a LCTV and operated as a colour SLM. A significant development has been the replacement of the original TV electronics operating the display with enhanced drive electronics specially developed for this application. Through a computer interface colour images from a drawing package or video camera can now be readily displayed on the LCD as input to an optical system. A detailed evaluation of the colour LCD optical properties, indicates that the new drive electronics have considerably improved the operation of the display for use as a colour SLM. Applications are described employing the use of colour in Fourier plane filtering, image correlation and speckle metrology. The SLM (and optical system) developed demonstrates, how the addition of colour has greatly enhanced its capabilities to implement principles of optical data processing, conventionally performed monochromatically. The hybrid combination employed, combining colour optical data processing with electronic techniques has resulted in a capable development system. Further development of the system using current colour LCDs and the move towards a portable system, is considered in the study conclusion.

Employer attitudes toward hiring persons with disabilities in Armenia.

PubMed

Breen, Jonathon; Havaei, Farinaz; Pitassi, Cristina

2018-04-17

The purpose of this two-part study was to provide input into a strategy to improve employment opportunities for persons with disabilities in Armenia. Employment rates for persons with disabilities in Armenia have been variously reported between eight and 21%, much below the general employment rate of 82%. First, a Participatory Action Research process led to the development of a 15 item self-report measure - the Perceived Barriers to Employing Persons with Disabilities Scale - which was administered to 158 employers. Second, respondent data were examined to determine psychometric properties of the scale and to inform strategic recommendations for policy development. Exploratory factor analysis resulted in the removal of 6 items, leaving a 9 item scale. Responses produced a multidimensional scale clustering around 2 factors. The first of these, structural issues, was principally informed by employer perceptions of limited skill levels of persons with disabilities, high costs associated with employing persons with disabilities, and the lack of accessibility within facilities. The second factor, social issues, was informed by employers' anticipation of negative reactions of coworkers, customers and supervisors toward persons with disabilities entering the workforce. Employers also indicated a belief that persons with disabilities with skills should be entitled to work. Results of this study suggest that attitudes of Armenian employers toward people with disabilities, and subsequent hiring decisions, are partly informed by perceptions of the negative reactions of others within the workplace. This finding disagrees with studies from other jurisdictions, which generally consider that these attitudes are principally informed by perceived skills deficits on the part of people with disabilities. These results would support the development of employer-focused information and awareness campaigns designed to address both of these factors. Implications for Rehabilitation Employment rates for people with disabilities are much below those of the general population. Research indicates that employer attitudes contribute significantly to the employment success of people with disabilities. A recent employer survey in Armenia indicates that these attitudes are influenced by a perception that others within the workplace do not accept people with disabilities. Vocational counseling and training programs, and employer awareness interventions, may be more effective if this influence on employer attitudes is addressed.

Development of a table tennis robot for ball interception using visual feedback

NASA Astrophysics Data System (ADS)

Parnichkun, Manukid; Thalagoda, Janitha A.

2016-07-01

This paper presents a concept of intercepting a moving table tennis ball using a robot. The robot has four degrees of freedom(DOF) which are simplified in such a way that The system is able to perform the task within the bounded limit. It employs computer vision to localize the ball. For ball identification, Colour Based Threshold Segmentation(CBTS) and Background Subtraction(BS) methodologies are used. Coordinate Transformation(CT) is employed to transform the data, which is taken based on camera coordinate frame to the general coordinate frame. The sensory system consisted of two HD Web Cameras. The computation time of image processing from web cameras is long .it is not possible to intercept table tennis ball using only image processing. Therefore the projectile motion model is employed to predict the final destination of the ball.

Developing health insurance in transitional Asia.

PubMed

Ensor, T

1999-04-01

Many European and Asian economies are currently undergoing a process of economic transition away from state based command systems to market led economies. The impact of transition, such as a decline in public expenditure, break up of state enterprises and economic recession, has affected levels of funding available for social sectors. In the health sector, health insurance is being introduced as a way of alleviating the decline in funding arising from these processes. Most of the Former Soviet Union and a number of other Asian transition economies are currently introducing, extending or considering payroll based systems of health insurance. Comparisons with many Latin American countries, where social security based insurance has been encouraged since the first World War, can be illuminating. Experience suggests that, various factors have impeded or permitted development in these countries. General processes of economic change (transition factors) tend to affect all economies attempting to change the basis for public funding of services. Structural factors, such as urbanisation and the level of state or industrial employment, act as longer term inhibitors to the extension of coverage. These factors vary considerably across transition economies. This suggests that while a social security base for insurance may be a viable option for smaller industrialised European transitional economies, this is not the case for many of larger less industrialised economies. It is unclear how insurance will develop in the future. If a separate insurance fund is maintained it is important that its' purchasing function is developed. Otherwise it is not clear what value is added to the current health system. If entitlement is to be based on contribution, with the fund based on geographic or employment groups, systems for ensuring access for those not in employment and not classified as socially protected must be developed.

A model for the prediction of latent errors using data obtained during the development process

NASA Technical Reports Server (NTRS)

Gaffney, J. E., Jr.; Martello, S. J.

1984-01-01

A model implemented in a program that runs on the IBM PC for estimating the latent (or post ship) content of a body of software upon its initial release to the user is presented. The model employs the count of errors discovered at one or more of the error discovery processes during development, such as a design inspection, as the input data for a process which provides estimates of the total life-time (injected) error content and of the latent (or post ship) error content--the errors remaining a delivery. The model presented presumes that these activities cover all of the opportunities during the software development process for error discovery (and removal).

Fabrication of novel plasmonics-active substrates

NASA Astrophysics Data System (ADS)

Dhawan, Anuj; Gerhold, Michael; Du, Yan; Misra, Veena; Vo-Dinh, Tuan

2009-02-01

This paper describes methodologies for fabricating of highly efficient plasmonics-active SERS substrates - having metallic nanowire structures with pointed geometries and sub-5 nm gap between the metallic nanowires enabling concentration of high EM fields in these regions - on a wafer-scale by a reproducible process that is compatible with large-scale development of these substrates. Excitation of surface plasmons in these nanowire structures leads to substantial enhancement in the Raman scattering signal obtained from molecules lying in the vicinity of the nanostructure surface. The methodologies employed included metallic coating of silicon nanowires fabricated by employing deep UV lithography as well as controlled growth of silicon germanium on silicon nanostructures to form diamond-shaped nanowire structures followed by metallic coating. These SERS substrates were employed for detecting chemical and biological molecules of interest. In order to characterize the SERS substrates developed in this work, we obtained SERS signals from molecules such as p-mercaptobenzoic acid (pMBA) and cresyl fast violet (CFV) attached to or adsorbed on the metal-coated SERS substrates. It was observed that both gold-coated triangular shaped nanowire substrates as well as gold-coated diamond shaped nanowire substrates provided very high SERS signals for the nanowires having sub-15 nm gaps and that the SERS signal depends on the closest spacing between the metal-coated silicon and silicon germanium nanowires. SERS substrates developed by the different processes were also employed for detection of biological molecules such as DPA (Dipicolinic Acid), an excellent marker for spores of bacteria such as Anthrax.

Impaired Face Processing in Autism: Fact or Artifact?

ERIC Educational Resources Information Center

Jemel, Boutheina; Mottron, Laurent; Dawson, Michelle

2006-01-01

Within the last 10 years, there has been an upsurge of interest in face processing abilities in autism which has generated a proliferation of new empirical demonstrations employing a variety of measuring techniques. Observably atypical social behaviors early in the development of children with autism have led to the contention that autism is a…

The Interaction of Work Adjustment and Attachment Theory: Employment Counseling Implications

ERIC Educational Resources Information Center

Renfro-Michel, Edina L.; Burlew, Larry D.; Robert, Tracey

2009-01-01

Career development is a lifelong process beginning with career choice. However, career choice alone does not guarantee career success. Rather than focus on choosing a career, the theory of work adjustment (TWA) focuses on the process of becoming an exemplary employee through each stage of an individual's career. Within TWA, employee relationships…

Human Capital, Social Classes, and the Earnings Determination Process in Brazilian Agriculture.

ERIC Educational Resources Information Center

Neves, Jorge A.; Haller, Archibald O.; Fernandes, Danielle C.

This paper examines the process of earnings determination in the agricultural sector of Brazil. Among the main causal factors analyzed are human capital (education and work experience), labor market segmentation, gender, social class position, level of development/modernization, and concentration of land ownership. Data on individuals employed in…

Firm Size and Skill Formation Processes: An Emerging Debate

ERIC Educational Resources Information Center

Bishop, Daniel

2012-01-01

Recent research has established that small firms tend to develop and acquire the skills they need in different ways to those employed by larger organisations. More specifically, due to certain characteristics inherent to their small size, small firms generally display greater informality in their learning processes. As such, it is now broadly…

The Bologna Process and the European Gain: Africa's Development Demise?

ERIC Educational Resources Information Center

Shawa, Lester Brian

2008-01-01

The Bologna process is a fundamental restructuring of higher education in Europe, of which the introduction of three cycles: bachelor's, master's and doctorate, in lieu of the traditional long program is the single most important feature. Its objectives are to increase the employability of European citizens and the competitiveness and…

Occupationally Related Science. Draft Curriculum 1986-87.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of Occupational Education Programs.

To prepare occupational students for employment, a basic understanding of scientific knowledge and the processes of science that have been applied in the development of tools, machines, instruments, and technological techniques or processes should be taught. When a second unit of science was included for all high school students in the New York…

An Experimental Study of the Placement of Classification Skills in the Science-A Process Approach Curriculum Employing Piaget's Theory of Cognitive Development.

ERIC Educational Resources Information Center

Johnson, Theodore M.; Alfke, Dorothy

The purpose of this study was to investigate whether success in the Science - A Process Approach (SAPA) process of classification designed for primary grade children is contingent upon the children's developmental level as defined by Piaget's theory. The investigators sought to determine whether children who had reached the concrete operational…

Design of a 2000 lbf LOX/LCH4 Throttleable Rocket Engine for a Vertical Lander

NASA Astrophysics Data System (ADS)

Lopez, Israel

Liquid oxygen (LOX) and liquid methane (LCH4) has been recognized as an attractive rocket propellant combination because of its in-situ resource utilization (ISRU) capabilities, namely in Mars. ISRU would allow launch vehicles to carry greater payloads and promote missions to Mars. This has led to an increasing interest to develop spacecraft technologies that employ this propellant combination. The UTEP Center for Space Exploration and Technology Research (cSETR) has focused part of its research efforts to developing LOX/LCH4 systems. One of those projects includes the development of a vertical takeoff and landing vehicle called JANUS. This vehicle will employ a LOX/LCH 4 propulsion system. The main propulsion engine is called CROME-X and is currently being developed as part of this project. This rocket engine will employ LOX/LCH4 propellants and is intended to operate from 2000-500 lbf thrust range. This thesis describes the design and development of CROME-X. Specifically, it describes the design process for the main engine components, the design criteria for each, and plans for future engine development.

Video Game Development Strategies for Creating Successful Cognitively Challenging Games

ERIC Educational Resources Information Center

Williams, Walter K.

2018-01-01

The video game industry is a global multibillion dollar industry with millions of players. The process of developing video games is essential for the continued growth of the industry, and developers need to employ effective strategies that will help them to create successful games. The purpose of this explorative qualitative single case study was…

Open and Distance Education as a Strategy for Human Capital Development in Nigeria

ERIC Educational Resources Information Center

Olakulehin, Felix Kayode

2008-01-01

The development of human capital has been identified as the most important component of all the factors employed in production economics. Since independence in 1960, Nigeria has placed great emphasis on training and education for human capital formation. However, the education process as the primary means of developing human resource has failed,…

5 CFR 960.107 - Authorized activities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 960.107 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS... resources in finance, internal auditing, personnel management, automated data processing applications... educational development of Government employees, improvement of labor-management relations, equal employment...

5 CFR 960.107 - Authorized activities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 960.107 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS... resources in finance, internal auditing, personnel management, automated data processing applications... educational development of Government employees, improvement of labor-management relations, equal employment...

5 CFR 960.107 - Authorized activities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 960.107 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS... resources in finance, internal auditing, personnel management, automated data processing applications... educational development of Government employees, improvement of labor-management relations, equal employment...

Understanding the real risks of changing employee benefit plans.

PubMed

Kane, Jon; St Amour, Jeffrey

2005-01-01

In an environment of constant change, corporations are looking to alter employee benefits programs to make them more responsive to employee and business needs. A complete risk assessment process is the key to preparing for changes to employee benefits programs by providing employers with an analysis of cost savings against the potential negative ramifications of change. This article outlines the steps involved in a complete review of risk assessment. It then discusses how employers can develop successful change management communication strategies if, after conducting a risk assessment, employers decide to move forward with alterations to their employee benefits programs.

Department's Negotiated Rulemaking Process for Gainful Employment. Final Audit Report.

ERIC Educational Resources Information Center

US Department of Education, 2012

2012-01-01

The Department of Education (Department) is required to use negotiated rulemaking to develop proposed regulations for programs authorized under Title IV of the Higher Education Act of 1965, as amended (HEA). Under negotiated rulemaking, the Department works to develop the proposed regulations in collaboration with representatives of the parties…

Rhizomatic Literacies: Restructuring Pedagogy and Practice within the Freshmen Composition Classroom

ERIC Educational Resources Information Center

Webb, Adam

2009-01-01

Current approaches and trends in writing pedagogy within the composition classroom focus on the development of students' identities through personal, cultural, or disciplinary processes. By employing writing assignments and activities that concentrate on developing certain traits or characteristics of students' identities has led to a "crisis"…

Agricultural Products Sales and Service Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural products sales and service occupations. The list contains units (with and without subunits), competencies,…

Show Me Yours: Developing a Faculty-Wide Interdisciplinary Initiative in Built Environment Higher Education

ERIC Educational Resources Information Center

Wilson, Stephanie; Zamberlan, Lisa

2012-01-01

In the competitive market of higher education, government funding agencies consider universities accountable for ensuring a better alignment between educational processes, graduate capabilities and real world employability. Workforce leaders have developed new expectations about the capabilities of graduating students, expecting to employ…

Telling Our Stories: Using Autoethnography to Construct Identities at the Intersections

ERIC Educational Resources Information Center

Drechsler Sharp, Marybeth; Riera, Jose-Luis; Jones, Susan R.

2012-01-01

Scholarly inquiry into identity development is a foundation of the student affairs field; typically, such scholarship examines domains of student development as discrete entities. This paper explains the process an autoethnographic research group employed to explore how multiple identities have been shaped during coresearchers' lifetimes. Findings…

The Development of Competent Marketing Professionals

ERIC Educational Resources Information Center

Walker, Ian; Tsarenko, Yelena; Wagstaff, Peter; Powell, Irene; Steel, Marion; Brace-Govan, Jan

2009-01-01

The process of transition from university undergraduate to business professional is a crucial stage in the development of a business career. This study examines both graduate and employer perspectives on the essential skills and knowledge needed by marketing professionals to successfully perform their roles. From in-depth interviews with 14…

Teaching Teamwork through Coteaching in the Business Classroom

ERIC Educational Resources Information Center

Kliegl, Julie A.; Weaver, Kari D.

2014-01-01

Business educators recognize the importance of developing teamwork as an employability skill. However, current methods used to teach teamwork have been met with mixed results from both students and educators. This article integrates research on the importance of teamwork, team development processes, and coteaching through examining a case study…

Experiences using Visualization Techniques to Present Requirements, Risks to Them, and Options for Risk Mitigation

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Cornford, Steven L.; Kiper, James D.; Menzies, Tim

2006-01-01

For several years we have been employing a risk-based decision process to guide development and application of advanced technologies, and for research and technology portfolio planning. The process is supported by custom software, in which visualization plays an important role. During requirements gathering, visualization is used to help scrutinize the status (completeness, extent) of the information. During decision making based on the gathered information, visualization is used to help decisionmakers understand the space of options and their consequences. In this paper we summarize the visualization capabilities that we have employed, indicating when and how they have proven useful.

Manipulation of the mouse genome: a multiple impact resource for drug discovery and development.

PubMed

Prosser, Haydn; Rastan, Sohaila

2003-05-01

Few would deny that the pharmaceutical industry's investment in genomics throughout the 1990s has yet to deliver in terms of drugs on the market. The reasons are complex and beyond the scope of this review. The unique ability to manipulate the mouse genome, however, has already had a positive impact on all stages of the drug discovery process and, increasingly, on the drug development process too. We give an overview of some recent applications of so-called 'transgenic' mouse technology in pharmaceutical research and development. We show how genetic manipulation in the mouse can be employed at multiple points in the drug discovery and development process, providing new solutions to old problems.

Distributed digital signal processors for multi-body flexible structures

NASA Technical Reports Server (NTRS)

Lee, Gordon K. F.

1992-01-01

Multi-body flexible structures, such as those currently under investigation in spacecraft design, are large scale (high-order) dimensional systems. Controlling and filtering such structures is a computationally complex problem. This is particularly important when many sensors and actuators are located along the structure and need to be processed in real time. This report summarizes research activity focused on solving the signal processing (that is, information processing) issues of multi-body structures. A distributed architecture is developed in which single loop processors are employed for local filtering and control. By implementing such a philosophy with an embedded controller configuration, a supervising controller may be used to process global data and make global decisions as the local devices are processing local information. A hardware testbed, a position controller system for a servo motor, is employed to illustrate the capabilities of the embedded controller structure. Several filtering and control structures which can be modeled as rational functions can be implemented on the system developed in this research effort. Thus the results of the study provide a support tool for many Control/Structure Interaction (CSI) NASA testbeds such as the Evolutionary model and the nine-bay truss structure.

Approach to Low-Cost High-Efficiency OLED Lighting. Building Technologies Solid State Lighting (SSL) Program Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pei, Qibing

2017-10-06

This project developed an integrated substrate which organic light emitting diode (OLED) panel developers could employ the integrated substrate to fabricate OLED devices with performance and projected cost meeting the MYPP targets of the Solid State Lighting Program of the Department of Energy. The project optimized the composition and processing conditions of the integrated substrate for OLED light extraction efficiency and overall performance. The process was further developed for scale up to a low-cost process and fabrication of prototype samples. The encapsulation of flexible OLEDs based on this integrated substrate was also investigated using commercial flexible barrier films.

The experience of attempting to return to work following spinal cord injury: a systematic review of the qualitative literature.

PubMed

Hilton, Gillean; Unsworth, Carolyn; Murphy, Gregory

2018-07-01

This review sought to answer the question "What are the barriers and facilitators influencing people's experience of return to work following spinal cord injury?" Studies that met the selection criteria were identified, presented and critically appraised using National Institute for Health and Care Excellence guidelines. Thematic synthesis was completed with studies possessing strong methodological rigor. Synthesis and interpretation involved three stages; coding of primary data; development of descriptive themes reflective of the primary data; and establishment of analytical themes to answer the review question. Data from nine papers were included in the thematic synthesis. Several descriptive themes and three analytical themes were drawn from the data to answer the research question. Analytical themes included: a matrix of personal and environmental factors exists requiring complex navigation in order to create possibilities and opportunities for postinjury employment; the process of seeking or gaining employment shares a reciprocal relationship with the temporal nature of adjustment to spinal cord injury; and there is an intrinsic need for occupational engagement through paid employment. Returning to or gaining employment after spinal cord injury is a fundamentally difficult experience for people. Multiple strategies are required to support the navigation of the process. There is, however, a need in people with spinal cord injury, to be a worker, and with that comes the inherent benefits of being employed. Implications for rehabilitation Returning to work should be a significant focus of spinal cord injury rehabilitation. Employment is both possible and health promoting following spinal cord injury. Multiple strategies are required to support people to navigate the return to work process. It is important to be cognizant of the individual motivations for being a worker and the complexity of the adjustment process. Spinal cord injury centers can provide a consistent and supportive framework and culture of positivity about employment after spinal cord injury.

Parallel Visualization Co-Processing of Overnight CFD Propulsion Applications

NASA Technical Reports Server (NTRS)

Edwards, David E.; Haimes, Robert

1999-01-01

An interactive visualization system pV3 is being developed for the investigation of advanced computational methodologies employing visualization and parallel processing for the extraction of information contained in large-scale transient engineering simulations. Visual techniques for extracting information from the data in terms of cutting planes, iso-surfaces, particle tracing and vector fields are included in this system. This paper discusses improvements to the pV3 system developed under NASA's Affordable High Performance Computing project.

Accommodating a growing population in Javanese agriculture.

PubMed

Booth, A

1985-08-01

An examination of how the island of Java, Indonesia, has accommodated population growth over the past 150 years by a process of agricultural development is presented. A brief review of the literature on the relationship between agricultural development and population growth is first provided. Next, the available data on land area, cultivated area, agricultural production, and employment in Java over the past century are reviewed. The relationship between agricultural development and population growth in Java is then analyzed in terms of the concepts and processes discussed in the theoretical literature.

Process Evaluation of an Internet Career Fair.

ERIC Educational Resources Information Center

McIlveen, Peter; Gibson, Ellen; Fallon, Sharlene; Ross, Paul

2002-01-01

An Internet career fair for Australian college students was developed economically with a minimalist design presenting as much useful information as possible. Twenty major employers attracted 61,000 hits, a high proportion from external students. (SK)

78 FR 19019 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain Occupations Processed Under H-2A Special Procedures; Correction and Rescission AGENCY: Employment and Training...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, Natalie M.; Zok, Frank W.

One route for producing fiber-reinforced ceramic-matrix composites entails repeated impregnation and pyrolysis of a preceramic polymer in a fiber preform. The process relies crucially on the development of networks of contiguous cracks during pyrolysis, thereby allowing further impregnation to attain nearly-full densification. The present study employs in-situ x-ray computed tomography (XCT) to reveal in three dimensions the evolution of matrix structure during pyrolysis of a SiC-based preceramic polymer to 1200 °C. Observations are used to guide the development of a taxonomy of crack geometries and crack structures and to identify the temporal sequence of their formation. A quantitative analysis ismore » employed to characterize effects of local microstructural dimensions on the conditions required to form cracks of various types. Complementary measurements of gas evolution and mass loss of the preceramic polymer during pyrolysis as well as changes in mass density and Young's modulus provide context for the physical changes revealed by XCT. Furthermore, the findings provide a foundation for future development of physics-based models to guide composite fabrication processes.« less

Quality Measures for the Care of Patients with Narcolepsy

PubMed Central

Krahn, Lois E.; Hershner, Shelley; Loeding, Lauren D.; Maski, Kiran P.; Rifkin, Daniel I.; Selim, Bernardo; Watson, Nathaniel F.

2015-01-01

The American Academy of Sleep Medicine (AASM) commissioned a Workgroup to develop quality measures for the care of patients with narcolepsy. Following a comprehensive literature search, 306 publications were found addressing quality care or measures. Strength of association was graded between proposed process measures and desired outcomes. Following the AASM process for quality measure development, we identified three outcomes (including one outcome measure) and seven process measures. The first desired outcome was to reduce excessive daytime sleepiness by employing two process measures: quantifying sleepiness and initiating treatment. The second outcome was to improve the accuracy of diagnosis by employing the two process measures: completing both a comprehensive sleep history and an objective sleep assessment. The third outcome was to reduce adverse events through three steps: ensuring treatment follow-up, documenting medical comorbidities, and documenting safety measures counseling. All narcolepsy measures described in this report were developed by the Narcolepsy Quality Measures Work-group and approved by the AASM Quality Measures Task Force and the AASM Board of Directors. The AASM recommends the use of these measures as part of quality improvement programs that will enhance the ability to improve care for patients with narcolepsy. Citation: Krahn LE, Hershner S, Loeding LD, Maski KP, Rifkin DI, Selim B, Watson NF. Quality measures for the care of patients with narcolepsy. J Clin Sleep Med 2015;11(3):335–355. PMID:25700880

Growth of Bulk Wide Bandgap Semiconductor Crystals and Their Potential Applications

NASA Technical Reports Server (NTRS)

Chen, Kuo-Tong; Shi, Detang; Morgan, S. H.; Collins, W. Eugene; Burger, Arnold

1997-01-01

Developments in bulk crystal growth research for electro-optical devices in the Center for Photonic Materials and Devices since its establishment have been reviewed. Purification processes and single crystal growth systems employing physical vapor transport and Bridgman methods were assembled and used to produce high purity and superior quality wide bandgap materials such as heavy metal halides and II-VI compound semiconductors. Comprehensive material characterization techniques have been employed to reveal the optical, electrical and thermodynamic properties of crystals, and the results were used to establish improved material processing procedures. Postgrowth treatments such as passivation, oxidation, chemical etching and metal contacting during the X-ray and gamma-ray device fabrication process have also been investigated and low noise threshold with improved energy resolution has been achieved.

Real-time object tracking based on scale-invariant features employing bio-inspired hardware.

PubMed

Yasukawa, Shinsuke; Okuno, Hirotsugu; Ishii, Kazuo; Yagi, Tetsuya

2016-09-01

We developed a vision sensor system that performs a scale-invariant feature transform (SIFT) in real time. To apply the SIFT algorithm efficiently, we focus on a two-fold process performed by the visual system: whole-image parallel filtering and frequency-band parallel processing. The vision sensor system comprises an active pixel sensor, a metal-oxide semiconductor (MOS)-based resistive network, a field-programmable gate array (FPGA), and a digital computer. We employed the MOS-based resistive network for instantaneous spatial filtering and a configurable filter size. The FPGA is used to pipeline process the frequency-band signals. The proposed system was evaluated by tracking the feature points detected on an object in a video. Copyright © 2016 Elsevier Ltd. All rights reserved.

A fortran program for Monte Carlo simulation of oil-field discovery sequences

USGS Publications Warehouse

Bohling, Geoffrey C.; Davis, J.C.

1993-01-01

We have developed a program for performing Monte Carlo simulation of oil-field discovery histories. A synthetic parent population of fields is generated as a finite sample from a distribution of specified form. The discovery sequence then is simulated by sampling without replacement from this parent population in accordance with a probabilistic discovery process model. The program computes a chi-squared deviation between synthetic and actual discovery sequences as a function of the parameters of the discovery process model, the number of fields in the parent population, and the distributional parameters of the parent population. The program employs the three-parameter log gamma model for the distribution of field sizes and employs a two-parameter discovery process model, allowing the simulation of a wide range of scenarios. ?? 1993.

Marketing Mix Formulation for Higher Education: An Integrated Analysis Employing Analytic Hierarchy Process, Cluster Analysis and Correspondence Analysis

ERIC Educational Resources Information Center

Ho, Hsuan-Fu; Hung, Chia-Chi

2008-01-01

Purpose: The purpose of this paper is to examine how a graduate institute at National Chiayi University (NCYU), by using a model that integrates analytic hierarchy process, cluster analysis and correspondence analysis, can develop effective marketing strategies. Design/methodology/approach: This is primarily a quantitative study aimed at…

The Association of Social Work Boards' Licensure Examinations: A Review of Reliability and Validity Processes

ERIC Educational Resources Information Center

Marson, Stephen M.; DeAngelis, Donna; Mittal, Nisha

2010-01-01

Objectives: The purpose of this article is to create transparency for the psychometric methods employed for the development of the Association of Social Work Boards' (ASWB) exams. Results: The article includes an assessment of the macro (political) and micro (statistical) environments of testing social work competence. The seven-step process used…

Faith, Work, and Praxis: A Process Model of Integration for Christian Student Affairs Administrators

ERIC Educational Resources Information Center

Cliburn Allen, Cara; Alleman, Nathan F.

2017-01-01

The scholarship regarding faith integration practice has largely focused on faculty work; however, the field faces a paucity of data-supported approaches to understanding faith integration in the work lives of administrators. In this qualitative study, we developed a conceptual model that employs the concept of praxis to analyze the process by…

Judgment under Uncertainty: Heuristics and Biases.

PubMed

Tversky, A; Kahneman, D

1974-09-27

This article described three heuristics that are employed in making judgements under uncertainty: (i) representativeness, which is usually employed when people are asked to judge the probability that an object or event A belongs to class or process B; (ii) availability of instances or scenarios, which is often employed when people are asked to assess the frequency of a class or the plausibility of a particular development; and (iii) adjustment from an anchor, which is usually employed in numerical prediction when a relevant value is available. These heuristics are highly economical and usually effective, but they lead to systematic and predictable errors. A better understanding of these heuristics and of the biases to which they lead could improve judgements and decisions in situations of uncertainty.

Data Strategies to Support Automated Multi-Sensor Data Fusion in a Service Oriented Architecture

DTIC Science & Technology

2008-06-01

and employ vast quantities of content. This dissertation provides two software architectural patterns and an auto-fusion process that guide the...UDDI), Simple Order Access Protocol (SOAP), Java, Maritime Domain Awareness (MDA), Business Process Execution Language for Web Service (BPEL4WS) 16...content. This dissertation provides two software architectural patterns and an auto-fusion process that guide the development of a distributed

Developing Students' Creative Self-Efficacy Based on Design-Thinking: Evaluation of an Elective University Course

ERIC Educational Resources Information Center

Ohly, Sandra; Plückthun, Laura; Kissel, Dorothea

2017-01-01

The development of novel and useful ideas is a process that can be described in multiple steps, including information gathering, generating ideas and evaluating ideas. We evaluated a university course that was developed based on design thinking principles which employ similar steps. Our results show that the course was not effective in enhancing…

Development and Validation of a Web-Based Module to Teach Metacognitive Learning Strategies to Students in Higher Education

ERIC Educational Resources Information Center

Singh, Oma B.

2009-01-01

This study used a design based-research (DBR) methodology to examine how an Instructional Systematic Design (ISD) process such as ADDIE (Analysis, Design, Development, Implementation, Evaluation) can be employed to develop a web-based module to teach metacognitive learning strategies to students in higher education. The goal of the study was…

Recent Advances in the Development of Thick-Section Melt-Infiltrated C/SiC Composites

NASA Technical Reports Server (NTRS)

Babcock, Jason R.; Ramachandran, Gautham; Williams, Brian E.; Effinger, Michael R.

2004-01-01

Using a pressureless melt infiltration and in situ reaction process to form the silicon carbide (SiC) matrix, Ultramet has been developing a means to rapidly fabricate ceramic matrix composites (CMCs) targeting thicker sections. The process also employs a unique route for the application of oxide fiber interface coatings designed to protect the fiber and impart fiber-matrix debond. Working toward a 12 inch diameter, 2.5 inch thick demonstrator component, the effect of various processing parameters on room temperature flexure strength is being studied with plans for more extensive elevated temperature mechanical strength evaluation to follow this initial optimization process.

An advance care plan decision support video before major surgery: a patient- and family-centred approach.

PubMed

Isenberg, Sarina R; Crossnohere, Norah L; Patel, Manali I; Conca-Cheng, Alison; Bridges, John F P; Swoboda, Sandy M; Smith, Thomas J; Pawlik, Timothy M; Weiss, Matthew; Volandes, Angelo E; Schuster, Anne; Miller, Judith A; Pastorini, Carolyn; Roter, Debra L; Aslakson, Rebecca A

2018-06-01

Video-based advanc care planning (ACP) tools have been studied in varied medical contexts; however, none have been developed for patients undergoing major surgery. Using a patient- and family-centredness approach, our objective was to implement human-centred design (HCD) to develop an ACP decision support video for patients and their family members when preparing for major surgery. The study investigators partnered with surgical patients and their family members, surgeons and other health professionals to design an ACP decision support video using key HCD principles. Adapting Maguire's HCD stages from computer science to the surgical context, while also incorporating Elwyn et al 's specifications for patient-oriented decision support tool development, we used a six-stage HCD process to develop the video: (1) plan HCD process; (2) specify where video will be used; (3) specify user and organisational requirements; (4) produce and test prototypes; (5) carry out user-based assessment; (6) field test with end users. Over 450 stakeholders were engaged in the development process contributing to setting objectives, applying for funding, providing feedback on the storyboard and iterations of the decision tool video. Throughout the HCD process, stakeholders' opinions were compiled and conflicting approaches negotiated resulting in a tool that addressed stakeholders' concerns. Our patient- and family-centred approach using HCD facilitated discussion and the ability to elicit and balance sometimes competing viewpoints. The early engagement of users and stakeholders throughout the development process may help to ensure tools address the stated needs of these individuals. NCT02489799. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Reflective Dialog Journals: A Tool for Developing Professional Competence in Novice Teachers

ERIC Educational Resources Information Center

Gut, Dianne M.; Wan, Guofang; Beam, Pamela C.; Burgess, Lawrence

2016-01-01

This study focuses on the use of a mentoring protocol, the reflective dialogue journal, to develop professional competencies for pre-service teachers within a school-university partnership. To examine the effectiveness of the reflective dialogue journal protocol and the processes employed by mentor teachers to assist pre-service teachers with…

Broadening Educational Outcomes: Social Relations, Skills Development, and Employability for Youth

ERIC Educational Resources Information Center

Dejaeghere, Joan; Wiger, Nancy Pellowski; Willemsen, Laura Wangsness

2016-01-01

This article argues that, if a global development aim is to address educational inequalities, the post-2015 agenda needs to conceptually and practically broaden the focus of learning to include social relations as important processes and outcomes for achieving educational equity. We draw on Sen's capability approach and Bourdieu's forms of capital…

Policy and Curriculum Development in Greece. the Case of Secondary School Curriculum

ERIC Educational Resources Information Center

Ifanti, Amalia A.

2007-01-01

This paper examines the politics and values of the secondary school curriculum in Greece and attempts to find out the influences of cultural tradition and centralized control on curriculum development. In particular, it studies the decision-making process and the politics of educational control, employing some theoretical elements from centralist…

Age-Related Changes in Transient and Oscillatory Brain Responses to Auditory Stimulation during Early Adolescence

ERIC Educational Resources Information Center

Poulsen, Catherine; Picton, Terence W.; Paus, Tomas

2009-01-01

Maturational changes in the capacity to process quickly the temporal envelope of sound have been linked to language abilities in typically developing individuals. As part of a longitudinal study of brain maturation and cognitive development during adolescence, we employed dense-array EEG and spatiotemporal source analysis to characterize…

Faculty Processes Used to Evaluate Self-Reflective Journals in an Online RN-BSN Program

ERIC Educational Resources Information Center

Polley-Payne, Kathleen E.

2017-01-01

Evaluation of student learning activities is part of the fabric of higher education. Expected by accrediting agencies within the health professions disciplines in curricula aimed at the development of reflective practitioners. Student self-reflecting journaling is a strategy frequently employed as a tool to develop reflective practitioners and…

The Development of Reading Ability in Kindergarten. Technical Report No. 515.

ERIC Educational Resources Information Center

Meyer, Linda A.; And Others

A study was conducted to explore how children learn to read in kindergarten. The study employed a heuristic model that included entering ability, home background, instructional processes, home support for literacy development, and measures of student ability at the end of kindergarten. Children were tested, whole-day classroom observations were…

Organizing Self-Employment Programs: A Guide for Development Organizations.

ERIC Educational Resources Information Center

Rinehart, Eric L., Ed.; Lamb, Melissa, Ed.

This resource guide is intended to help communities that want to implement an entrepreneurship training program. Chapters I and II contain general advice for the planning process, such as how to assess need and community support, assess current services for entrepreneurs, select target clientele, develop a community support network, and identify…

Targeting Low Career Confidence Using the Career Planning Confidence Scale

ERIC Educational Resources Information Center

McAuliffe, Garrett; Jurgens, Jill C.; Pickering, Worth; Calliotte, James; Macera, Anthony; Zerwas, Steven

2006-01-01

The authors describe the development and validation of a test of career planning confidence that makes possible the targeting of specific problem issues in employment counseling. The scale, developed using a rational process and the authors' experience with clients, was tested for criterion-related validity against 2 other measures. The scale…

The Vocational Skills Gap for Management Accountants: The Stakeholders' Perspectives.

ERIC Educational Resources Information Center

Hassall, Trevor; Joyce, John; Montano, Jose Luis Arquero; Anes, Jose Antonio Donoso

2003-01-01

Develops a case study that examines the process of the professional education and training of management accountants. Identifies the relative importance of a specified range of vocational skills needed for a chartered management accountant, and prioritizes areas for development and training based on opinions of employers and students. (Author/LRW)

Between unemployment and employment: experience of unemployed long-term pain sufferers.

PubMed

Glavare, Maria; Löfgren, Monika; Schult, Marie-Louise

2012-01-01

This study explored and analysed how patients experienced possibilities for, and barriers to, work return after participation in a multi-professional pain-rehabilitation program followed by a coached work-training program (CWT). Eleven informants (8 women/3 men) with long-term musculoskeletal pain who had participated in the CWT program for 4-21 months (mean=11) comprised the study. A qualitative emergent design was used. Data collected with interviews were analysed using the constant comparison method of grounded theory. Triangulation in researchers were used. The analyses of the interviews resulted in the development of a three-category theoretical model, which was named "a way back to work". The main category "Experience of a way back to work" consisted of the informants' experience during the process between unemployment and employment. The category "Support" describes the help the informants received from various actors, and the category "Negative response" describes negative responses from the actors involved, which was an important barrier in the process between unemployment and employment. Professional individualised support, participants feeling involved in their rehabilitation process, coaching at real workplaces and multi-professional team including health care personnel, were valuable during the process towards work.

A Cognitive Information Processing Approach to Employment Problem Solving and Decision Making.

ERIC Educational Resources Information Center

Sampson, James P., Jr.; Lenz, Janet G.; Reardon, Robert C.; Peterson, Gary W.

1999-01-01

Applies a cognitive information processing approach to the specific process of employment problem solving and decision making. Definitions and accompanying employment examples are followed by an exploration of the nature of employment problems. Examples of positive and negative cognitions that have an impact on the effectiveness of employment…

Applying NASA's explosive seam welding

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1991-01-01

The status of an explosive seam welding process, which was developed and evaluated for a wide range of metal joining opportunities, is summarized. The process employs very small quantities of explosive in a ribbon configuration to accelerate a long-length, narrow area of sheet stock into a high-velocity, angular impact against a second sheet. At impact, the oxide films of both surface are broken up and ejected by the closing angle to allow atoms to bond through the sharing of valence electrons. This cold-working process produces joints having parent metal properties, allowing a variety of joints to be fabricated that achieve full strength of the metals employed. Successful joining was accomplished in all aluminum alloys, a wide variety of iron and steel alloys, copper, brass, titanium, tantalum, zirconium, niobium, telerium, and columbium. Safety issues were addressed and are as manageable as many currently accepted joining processes.

Detection of digital FSK using a phase-locked loop

NASA Technical Reports Server (NTRS)

Lindsey, W. C.; Simon, M. K.

1975-01-01

A theory is presented for the design of a digital FSK receiver which employs a phase-locked loop to set up the desired matched filter as the arriving signal frequency switches. The developed mathematical model makes it possible to establish the error probability performance of systems which employ a class of digital FM modulations. The noise mechanism which accounts for decision errors is modeled on the basis of the Meyr distribution and renewal Markov process theory.

Using Theatric Pedagogy To Develop Social And Emotional Skills In Order To Improve Employability Of Engineering Students

NASA Astrophysics Data System (ADS)

Pertea, Alina; Grecu, Valentin

2015-07-01

This research is the result of intense concerns about the role of theater in society beyond the theater show, from the creative process of analysis and introspective psychological insight, to the side effects of theater as a form of expression of the individual, and reception, assimilation and processing of theatrical codes and messages. The paper focuses therefore on theatric pedagogy, the forming tools and the size of the theater, and its value as a means and as a didactic factor for personality stimulation and development, both in terms of form and content. To this end, there are presented both theoretical perspectives and an exploratory study, which aims to verify the applicability, usefulness and effectiveness of theatric pedagogy means as an additional training method to facilitate the integration of graduates in employment and a successful professional collaboration, in an industry mainly in the field of real profile

Strategic wellness management in Finland: The first national survey of the management of employee well-being.

PubMed

Aura, Ossi; Ahonen, Guy; Ilmarinen, Juhani

2010-12-01

To examine the scope of strategic wellness management (SWM) in Finland. To measure management of wellness a strategic wellness management index (SWMI) was developed. On the basis of the developed SWM model an Internet questionnaire was conducted for randomly selected employers representing seven business areas and three size categories. Corporate activities and SWMI for each employer and for business area and size groups were calculated. Results highlighted relatively good activity in strategic wellness (SW) processes and fairly low level of SWM procedures. The average values (± SD) of SWMI were 53.6 ± 12.3 for large, 42.8 ± 11.7 for medium-size, and 32.8 ± 12.1 for small companies. SWMI can be a positive new, strong concept to measure SW processes and thus improve both the well-being of the employees and the productivity of the enterprise.

Anaerobic digestion of municipal solid waste: Technical developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivard, C.J.

1996-01-01

The anaerobic biogasification of organic wastes generates two useful products: a medium-Btu fuel gas and a compost-quality organic residue. Although commercial-scale digestion systems are used to treat municipal sewage wastes, the disposal of solid organic wastes, including municipal solid wastes (MSW), requires a more cost-efficient process. Modern biogasification systems employ high-rate, high-solids fermentation methods to improve process efficiency and reduce capital costs. The design criteria and development stages are discussed. These systems are also compared with conventional low-solids fermentation technology.

Mirror Technology

NASA Technical Reports Server (NTRS)

1992-01-01

Under a NASA contract, MI-CVD developed a process for producing bulk silicon carbide by means of a chemical vapor deposition process. The technology allows growth of a high purity material with superior mechanical/thermal properties and high polishability - ideal for mirror applications. The company employed the technology to develop three research mirrors for NASA Langley and is now marketing it as CVD SILICON CARBIDE. Its advantages include light weight, thermal stability and high reflectivity. The material has nuclear research facility applications and is of interest to industrial users of high power lasers.

Development of the Fray-Farthing-Chen Cambridge Process: Towards the Sustainable Production of Titanium and Its Alloys

NASA Astrophysics Data System (ADS)

Hu, Di; Dolganov, Aleksei; Ma, Mingchan; Bhattacharya, Biyash; Bishop, Matthew T.; Chen, George Z.

2018-02-01

The Kroll process has been employed for titanium extraction since the 1950s. It is a labour and energy intensive multi-step semi-batch process. The post-extraction processes for making the raw titanium into alloys and products are also excessive, including multiple remelting steps. Invented in the late 1990s, the Fray-Farthing-Chen (FFC) Cambridge process extracts titanium from solid oxides at lower energy consumption via electrochemical reduction in molten salts. Its ability to produce alloys and powders, while retaining the cathode shape also promises energy and material efficient manufacturing. Focusing on titanium and its alloys, this article reviews the recent development of the FFC-Cambridge process in two aspects, (1) resource and process sustainability and (2) advanced post-extraction processing.

Drawing links between the autism cognitive profile and imagination: Executive function and processing bias in imaginative drawings by children with and without autism.

PubMed

Ten Eycke, Kayla D; Müller, Ulrich

2018-02-01

Little is known about the relation between cognitive processes and imagination and whether this relation differs between neurotypically developing children and children with autism. To address this issue, we administered a cognitive task battery and Karmiloff-Smith's drawing task, which requires children to draw imaginative people and houses. For children with autism, executive function significantly predicted imaginative drawing. In neurotypically developing controls, executive function and cognitive-perceptual processing style predicted imaginative drawing, but these associations were moderated by mental age. In younger (neurotypically developing) children, better executive function and a local processing bias were associated with imagination; in older children, only a global bias was associated with imagination. These findings suggest that (a) with development there are changes in the type of cognitive processes involved in imagination and (b) children with autism employ a unique cognitive strategy in imaginative drawing.

Computer image analysis in caryopses quality evaluation as exemplified by malting barley

NASA Astrophysics Data System (ADS)

Koszela, K.; Raba, B.; Zaborowicz, M.; Przybył, K.; Wojcieszak, D.; Czekała, W.; Ludwiczak, A.; Przybylak, A.; Boniecki, P.; Przybył, J.

2015-07-01

One of the purposes to employ modern technologies in agricultural and food industry is to increase the efficiency and automation of production processes, which helps improve productive effectiveness of business enterprises, thus making them more competitive. Nowadays, a challenge presents itself for this branch of economy, to produce agricultural and food products characterized by the best parameters in terms of quality, while maintaining optimum production and distribution costs of the processed biological material. Thus, several scientific centers seek to devise new and improved methods and technologies in this field, which will allow to meet the expectations. A new solution, under constant development, is to employ the so-called machine vision which is to replace human work in both quality and quantity evaluation processes. An indisputable advantage of employing the method is keeping the evaluation unbiased while improving its rate and, what is important, eliminating the fatigue factor of the expert. This paper elaborates on the topic of quality evaluation by marking the contamination in malting barley grains using computer image analysis and selected methods of artificial intelligence [4-5].

Audio signal analysis for tool wear monitoring in sheet metal stamping

NASA Astrophysics Data System (ADS)

Ubhayaratne, Indivarie; Pereira, Michael P.; Xiang, Yong; Rolfe, Bernard F.

2017-02-01

Stamping tool wear can significantly degrade product quality, and hence, online tool condition monitoring is a timely need in many manufacturing industries. Even though a large amount of research has been conducted employing different sensor signals, there is still an unmet demand for a low-cost easy to set up condition monitoring system. Audio signal analysis is a simple method that has the potential to meet this demand, but has not been previously used for stamping process monitoring. Hence, this paper studies the existence and the significance of the correlation between emitted sound signals and the wear state of sheet metal stamping tools. The corrupting sources generated by the tooling of the stamping press and surrounding machinery have higher amplitudes compared to that of the sound emitted by the stamping operation itself. Therefore, a newly developed semi-blind signal extraction technique was employed as a pre-processing technique to mitigate the contribution of these corrupting sources. The spectral analysis results of the raw and extracted signals demonstrate a significant qualitative relationship between wear progression and the emitted sound signature. This study lays the basis for employing low-cost audio signal analysis in the development of a real-time industrial tool condition monitoring system.

From assistive to enhancing technology: should the treatment-enhancement distinction apply to future assistive and augmenting technologies?

PubMed

Minerva, Francesca; Giubilini, Alberto

2018-04-01

The treatment-enhancement distinction is often used to delineate acceptable and unacceptable medical interventions. It is likely that future assistive and augmenting technologies will also soon develop to a level that they might be considered to provide users, in particular those with disabilities, with abilities that go beyond natural human limits, and become in effect an enhancing technology. In this paper, we describe how this process might take place, and discuss the moral implications of such developments. We argue that such developments are morally acceptable and indeed desirable. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Investigation of Municipal Solid Waste to Alcohol Conversion for Army Use

DTIC Science & Technology

1992-03-01

fuel ethanol and other byproducts. To convert the cellulosic fraction of MSW to fermentable sugars, the first process uses a single stage of dilute acid...ethanol and other byproducts. To convert the cellulosic fraction of MSW to fermentable sugars, the first process uses a single stage of dilute acid...of the cellulosic fraction to produce fermentable sugars. The first process, developed by the Tennessee Valley Authority (TVA), employs a single

The provision of workplace accommodations following cancer: survivor, provider, and employer perspectives.

PubMed

Stergiou-Kita, Mary; Pritlove, Cheryl; van Eerd, Dwayne; Holness, Linn D; Kirsh, Bonnie; Duncan, Andrea; Jones, Jennifer

2016-06-01

With improvements in screening, diagnosis, and treatment, the number of persons surviving cancer and staying at or returning to work is increasing. While workplace accommodations optimize workers' abilities to participate in the workforce, there has been little in-depth investigation of the types of accommodations reported to have been provided to cancer survivors and the processes relevant to ensuring their successful implementation. We employed an exploratory qualitative method and conducted 40 semi-structured interviews with three groups: (i) cancers survivors (n = 16), (ii) health/vocational service providers (n = 16), and (iii) employer representatives (n = 8) to explore return to work and accommodation processes, successes, and challenges. An inductive thematic analysis approach was used to analyze the data. Four types of accommodations were recommended: (1) graduated return to work plans and flexible scheduling, (2) modification of work duties and performance expectations, (3) retraining and supports at the workplace, and (4) modification of the physical work environment and/or the provision of adaptive aids/technologies. Processes relevant to ensuring effective accommodations included: (1) developing knowledge about accommodations, (2) employer's ability to accommodate, (3) negotiating reasonable accommodations, (4) customizing accommodations, and (5) implementing and monitoring accommodation plans. Accommodation challenges included: (1) survivors' fears requesting accommodations, (2) developing clear and specific accommodations, (3) difficult to accommodate jobs, and (4) workplace challenges, including strained pre-cancer workplace relationships, insufficient/inflexible workplace policies, employer concerns regarding productivity and precedent setting, and limited modified duties. Accommodations need to be customized and clearly linked to survivors' specific job demands, work context, and available workplace supports. Survivors need to feel comfortable disclosing the need for accommodations. Ongoing communication and monitoring are required to ensure accommodations are implemented and changes made to the return to work plan as required. The provision of appropriate workplace accommodations can enhance survivors' abilities to stay or return to work.

Thermal stress, human performance, and physical employment standards.

PubMed

Cheung, Stephen S; Lee, Jason K W; Oksa, Juha

2016-06-01

Many physically demanding occupations in both developed and developing economies involve exposure to extreme thermal environments that can affect work capacity and ultimately health. Thermal extremes may be present in either an outdoor or an indoor work environment, and can be due to a combination of the natural or artificial ambient environment, the rate of metabolic heat generation from physical work, processes specific to the workplace (e.g., steel manufacturing), or through the requirement for protective clothing impairing heat dissipation. Together, thermal exposure can elicit acute impairment of work capacity and also chronic effects on health, greatly contributing to worker health risk and reduced productivity. Surprisingly, in most occupations even in developed economies, there are rarely any standards regarding enforced heat or cold safety for workers. Furthermore, specific physical employment standards or accommodations for thermal stressors are rare, with workers commonly tested under near-perfect conditions. This review surveys the major occupational impact of thermal extremes and existing employment standards, proposing guidelines for improvement and areas for future research.

Some technical considerations on the evolution of the IBIS system. [Image Based Information System

NASA Technical Reports Server (NTRS)

Bryant, N. A.; Zobrist, A. L.

1982-01-01

In connection with work related to the use of earth-resources images, it became apparent by 1974, that certain system improvements are necessary for the efficient processing of digital data. To resolve this dilemma, Billingsley and Bryant (1975) proposed the use of image processing technology. Bryant and Zobrist (1976) reported the development of the Image Based Information System (IBIS) as a subset of an overall Video Image Communication and Retrieval (VICAR) image processing system. A description of IBIS is presented, and its employment in connection with advanced applications is discussed. It is concluded that several important lessons have been learned from the development of IBIS. The development of a flexible system such as IBIS is found to rest upon the prior development of a general purpose image processing system, such as VICAR.

What Does Age Have to Do with Skills Proficiency? Adult Skills in Focus #3

ERIC Educational Resources Information Center

OECD Publishing, 2016

2016-01-01

Adults tend to lose their information-processing skills as they age, especially if they do not use them. While older adults may compensate for this loss by developing other valuable skills, the importance of being proficient in information-processing skills in determining wages and employment does not diminish as workers age. Probably the most…

The Influence of Process Approach on English as Second Language Students' Performances in Essay Writing

ERIC Educational Resources Information Center

Akinwamide, Timothy Kolade

2012-01-01

This study examined the influence of Process Approach on English as second language Students' performances in essay writing. The purpose was to determine how far this current global approach could be of assistance to the writing skill development of these bilingual speakers of English language. The study employed the pre-test post-test control…

Process integration for simultaneous saccharification, fermentation, and recovery (SSFR): Production of butanol from corn stover using Clostridium beijerinckii P260

USDA-ARS?s Scientific Manuscript database

A simultaneous saccharification, fermentation, and recovery (SSFR) process was developed for production of acetone butanol ethanol (AB or ABE), of which butanol is the main product, from corn stover employing Clostridium beijerinckii P260. Of the 86 gL^-1^ corn stover, over 97% of the sugars were r...

The Making of a Government LSI - From Warfare Capability to Operational System

DTIC Science & Technology

2015-04-30

continues to evolve and implement Lead System Integrator (LSI) acquisition strategies, they have started to define numerous program initiatives that...employ more integrated engineering and management processes and techniques. These initiatives are developing varying acquisition approaches that define (1...government LSI transformation. Navy Systems Commands have begun adding a higher level of integration into their acquisition process with the

A Study of Entry-Level Employment Technological Competencies for the Junior College Graduates Majoring in Electronic Engineering.

ERIC Educational Resources Information Center

Chen, Woei-Kae; Chang, Liang-Te

A study examined the technological competencies of the electronic engineering departments of junior colleges in Taiwan. It used a combination of two methods--a revised DACUM (Developing a Curriculum) process and a revised V-TECS (Vocational-Technical Education Consortium of States) process--to analyze the duty/task profile and task/element list of…

Iteration and Prototyping in Creating Technical Specifications.

ERIC Educational Resources Information Center

Flynt, John P.

1994-01-01

Claims that the development process for computer software can be greatly aided by the writers of specifications if they employ basic iteration and prototyping techniques. Asserts that computer software configuration management practices provide ready models for iteration and prototyping. (HB)

ITS/CVO strategic & business plan for the state of Georgia

DOT National Transportation Integrated Search

1998-05-01

This document records the State of Georgias strategic and tactical plans for employing ITS/CVO technology to improve its Commercial Vehicle Administration (CVA) functions. The process by which this plan was developed included a detailed assessment...

A self-assessment of the propensity to obtain future employment: a case of final-year engineering students at the University of Botswana

NASA Astrophysics Data System (ADS)

Ssegawa, Joseph K.; Kasule, Daniel

2017-09-01

The article provides a self-assessment by final-year engineering students at the University of Botswana regarding the propensity to get employment. Students rated which employability attributes are important, the level of attainment and the sources that have facilitated the development of the attributes. Results indicated that students identified the most important attributes as management of time; possessing a high level of technical skills, meeting deadlines and creating viable solutions for solving a problem. They also indicated that they have weaknesses in managing time, meeting deadlines and creating viable solutions (attributes critical to the engineering profession). Students reported that their strengths were in having a positive attitude, orderly physical presentation, adaptation to new environments and willingness to learn new ideas. Students further noted that they developed the attributes from the university academic system followed by their own private activities. The study concludes that students lacked some of the critical attributes of engineering. They therefore, need to be explicitly and holistically sensitised as to how the attributes relate to their profession, employment and career development. As part of the review of the engineering programmes, sensitisation could be included in the induction process at enrolment.

Career planning and development for nurses: the time has come.

PubMed

Donner, G J; Wheeler, M M

2001-06-01

Developments in how the nursing profession is perceived by nurses and by society, along with unparalleled changes in health care systems, have created an environment in which individual nurses must take control of their careers and futures. Educators, employers and professional organizations also have a key role to play in fostering the career planning and development of nurses, usually the largest employee group in most health care organizations. This article provides an overview of what career planning and development is and why it is important for nurses. A career planning and development model is described that provides nurses with a focused strategy to take greater responsibility for engaging in the ongoing planning process that is crucial throughout the major stages of their career. Finally, educators, employers and professional organizations are challenged to collaborate with individual nurses on career-development activities that will enable nurses to continue to provide high-quality care in ever-changing health care systems.

Valuing the human asset - the impact of university placements on academic performance and graduate employment amongst management students

NASA Astrophysics Data System (ADS)

Brooks, R.

2012-05-01

The employment market for graduates is competitive with employers requiring appropriate work experience in addition to academic qualifications. Sandwich courses, where up to a year is spent in industry, provide an opportunity for structured work experience to be gained alongside studying. Benefits of placements include improved academic performance and the development of transferable skills to increase employability. This paper evaluates the impact of placements on academic performance and graduate employment among management students. Analysing performance data and graduate destinations data, results indicate that management students completing a placement are more likely to perform better academically with improvements in their personal grades between year 2 and the final year. Additionally, a qualitative themed analysis of student experiences indicates placement students feel more confident in engaging with the graduate recruitment process, with a better understanding of their personal skills and an ability to articulate their experience in relation to the workplace.

Developing research and recruitment while fostering stakeholder engagement in a National Institutes of Mental Health-funded Interventions and Practice Research Infrastructure Programs grant for depression.

PubMed

Stirman, Shannon Wiltsey; Goldstein, Lizabeth A; Wrenn, Glenda; Barrett, Marna; Gibbons, Mary Beth Connolly; Casiano, Delane; Thompson, Donald; Green, Patricia P; Heintz, Laura; Barber, Jacques P; Crits-Christoph, Paul

2010-01-01

In the context of a National Institutes of Mental Health-funded Interventions and Practice Research Infrastructure Programs (IP-RISP) grant for the treatment of depression, a partnership was developed between a community mental health organization and a team of researchers. This paper describes the collaborative process, key challenges, and strategies employed to meet the goals of the first phase of the grant, which included development of a working and sustainable partnership and building capacity for recruitment and research. This paper was developed through the use of qualitative interviews and discussion with a variety of IP-RISP partners. Communication with multiple stakeholders through varied channels, feedback from stakeholders on research procedures, and employing a research liaison at the clinic have been key strategies in the first phase of the grant. The strategies we employed allowed multiple stakeholders to contribute to the larger mission of the IP-RISP and helped to establish an ongoing research program within the mental health organization.

Development and process evaluation of the participatory and action-oriented empowerment model facilitated by occupational health nurses for workplace health promotion in small and medium-sized enterprises.

PubMed

Nishikido, Noriko; Matsuda, Kazumi; Fukuda, Eiko; Motoki, Chiharu; Tsutaki, Miho; Kawakami, Yuko; Yuasa, Akiko; Iijima, Miyoko; Tanaka, Mika; Hirata, Mamoru; Hojoh, Minoru; Ikeda, Tomoko; Maeda, Kazutoshi; Miyoshi, Yukari; Arai, Sumiko; Mitsuhashi, Hiroyuki

2007-01-01

The objective of this study is to develop an available empowerment model for workplace health promotion (WHP) in small and medium-sized enterprises (SMEs) and to evaluate its applicability and feasibility. Semi-structured interviews with employers and workers in SMEs were conducted to assess their actual requirements for support. The structure of our new empowerment model was discussed and established through several rounds of focus group meetings with occupational safety and health researchers and practitioners on the basis of results of our interviews. We developed a new participatory and action-oriented empowerment model based on needs for support of employers and workers in SMEs. This new model consists of three originally developed tools: an action checklist, an information guidebook, and a book of good practices. As the facilitators, occupational health nurses (OHNs) from health insurance associations were trained to empower employers and workers using these tools. Approximately 80 SMEs (with less than 300 employees) were invited to participate in the model project. With these tools and continued empowerment by OHNs, employers and workers were able to smoothly work on WHP. This newly developed participatory and action-oriented empowerment model that was facilitated by trained OHNs appears to be both applicable and feasible for WHP in SMEs in Japan.

Promoting Teacher Adoption of GIS Using Teacher-Centered and Teacher-Friendly Design

ERIC Educational Resources Information Center

Hong, Jung Eun

2014-01-01

This article reports the results of a case study that employed user-centered design to develop training tutorials for helping middle school social studies teachers use Web-based GIS in their classrooms. This study placed teachers in the center of the design process in planning, designing, and developing the tutorials. This article describes how…

Developing a Template for Electronic Portfolios in Career and Technical Education

ERIC Educational Resources Information Center

Fowler, Matthew

2012-01-01

The purposes of this multiple case study were to determine if manufacturing and services sector employers found value in the use of an ePortfolio in the hiring process, and to develop a suggested template for an ePortfolio format to be used within career and technical education. Electronic portfolios "allow students to showcase their…

The College Football Student-Athlete's Academic Experience: Network Analysis and Model Development

ERIC Educational Resources Information Center

Young, Kyle McLendon

2010-01-01

A grounded theory research study employing network analysis as a means of facilitating the latter stages of the coding process was conducted at a selective university that competes at the highest level of college football. The purpose of the study was to develop a better understanding of how interactive dynamics and controlling mechanisms, such as…

The Report of the ANTA Board on the Implementation of New Apprenticeships (Including User Choice).

ERIC Educational Resources Information Center

Australian National Training Authority, Brisbane.

The development of "New Apprenticeships" reflects the need to strengthen employment-based training in Australia. The strengths and tradition of Australia's existing system must be built upon; inflexibilities that reduce options and choice must be removed. It is a four-stage process: development of policy principles, establishment of a…

United States Military Posture for FY 1987

DTIC Science & Technology

1987-01-01

monitor, plan, and execute mobilization, deployment, employment, and sustainment during peace, crisis, and war. JOPES requirements are being developed ...positioning 68 Deployment Management 69 VI Sustainability 69 Ammunition 69 Petroleum, Oils, and Lubricants 69 Military Construction 69...Commanders in Chiefs 73 Joint Doctrine 73 Combined Doctrine 74 Joint Force Development Process 74 Joint Resource Assessment 75 Joint Program

Learning Disabilities and Career Development. Practice Application Brief No. 20.

ERIC Educational Resources Information Center

Kerka, Sandra

The lifelong process of career development poses special challenges for people with learning disabilities (LD). Literature on employment issues for adults with LD frames on-the-job problems in terms of individual deficits or recasts the issues as a function of the significant societal barriers faced by those who do not fit the norm. Research on…

Informed Ignorance and the Difficulty of Using Guidelines in Policy Processes

ERIC Educational Resources Information Center

Fernler, Karin

2015-01-01

Based on an ethnographic study, this article investigates an attempt by a multidisciplinary group to employ pre-developed guidelines for producing a knowledge base that was to be used in a policy decision. The article contributes to previous studies of the development and use of knowledge-based guidelines and knowledge syntheses in policy-research…

Achievement as Resistance: The Development of a Critical Race Achievement Ideology among Black Achievers

ERIC Educational Resources Information Center

Carter, Dorinda J.

2008-01-01

In this article, Dorinda Carter examines the embodiment of a critical race achievement ideology in high-achieving black students. She conducted a yearlong qualitative investigation of the adaptive behaviors that nine high-achieving black students developed and employed to navigate the process of schooling at an upper-class, predominantly white,…

Developing a Peer Educator Program to Raise Awareness about Elder Abuse

ERIC Educational Resources Information Center

Weeks, Lori E.; Bryanton, Olive; McInnis-Perry, Gloria; Chaulk, Paul

2015-01-01

There continues to be lack of public awareness about elder abuse. To help address this issue, we developed and piloted an elder abuse peer educator training program from an educational gerontology and health empowerment perspective. We describe the process employed to train older adults as peer educators. We present evaluation results from data…

Harnessing ISO/IEC 12207 to Examine the Extent of SPI Activity in an Organisation

NASA Astrophysics Data System (ADS)

Clarke, Paul; O'Connor, Rory

The quality of the software development process directly affects the quality of the software product. To be successful, software development organisations must respond to changes in technology and business circumstances, and therefore software process improvement (SPI) is required. SPI activity relates to any modification that is performed to the software process in order to improve an aspect of the process. Although multiple process assessments could be employed to examine SPI activity, they present an inefficient tool for such an examination. This paper presents an overview of a new survey-based resource that utilises the process reference model in ISO/IEC 12207 in order to expressly and directly determine the level of SPI activity in a software development organisation. This survey instrument can be used by practitioners, auditors and researchers who are interested in determining the extent of SPI activity in an organisation.

The application of feature selection to the development of Gaussian process models for percutaneous absorption.

PubMed

Lam, Lun Tak; Sun, Yi; Davey, Neil; Adams, Rod; Prapopoulou, Maria; Brown, Marc B; Moss, Gary P

2010-06-01

The aim was to employ Gaussian processes to assess mathematically the nature of a skin permeability dataset and to employ these methods, particularly feature selection, to determine the key physicochemical descriptors which exert the most significant influence on percutaneous absorption, and to compare such models with established existing models. Gaussian processes, including automatic relevance detection (GPRARD) methods, were employed to develop models of percutaneous absorption that identified key physicochemical descriptors of percutaneous absorption. Using MatLab software, the statistical performance of these models was compared with single linear networks (SLN) and quantitative structure-permeability relationships (QSPRs). Feature selection methods were used to examine in more detail the physicochemical parameters used in this study. A range of statistical measures to determine model quality were used. The inherently nonlinear nature of the skin data set was confirmed. The Gaussian process regression (GPR) methods yielded predictive models that offered statistically significant improvements over SLN and QSPR models with regard to predictivity (where the rank order was: GPR > SLN > QSPR). Feature selection analysis determined that the best GPR models were those that contained log P, melting point and the number of hydrogen bond donor groups as significant descriptors. Further statistical analysis also found that great synergy existed between certain parameters. It suggested that a number of the descriptors employed were effectively interchangeable, thus questioning the use of models where discrete variables are output, usually in the form of an equation. The use of a nonlinear GPR method produced models with significantly improved predictivity, compared with SLN or QSPR models. Feature selection methods were able to provide important mechanistic information. However, it was also shown that significant synergy existed between certain parameters, and as such it was possible to interchange certain descriptors (i.e. molecular weight and melting point) without incurring a loss of model quality. Such synergy suggested that a model constructed from discrete terms in an equation may not be the most appropriate way of representing mechanistic understandings of skin absorption.

Dynamics of coupled human-landscape systems

NASA Astrophysics Data System (ADS)

Werner, B. T.; McNamara, D. E.

2007-11-01

A preliminary dynamical analysis of landscapes and humans as hierarchical complex systems suggests that strong coupling between the two that spreads to become regionally or globally pervasive should be focused at multi-year to decadal time scales. At these scales, landscape dynamics is dominated by water, sediment and biological routing mediated by fluvial, oceanic, atmospheric processes and human dynamics is dominated by simplifying, profit-maximizing market forces and political action based on projection of economic effect. Also at these scales, landscapes impact humans through patterns of natural disasters and trends such as sea level rise; humans impact landscapes by the effect of economic activity and changes meant to mitigate natural disasters and longer term trends. Based on this analysis, human-landscape coupled systems can be modeled using heterogeneous agents employing prediction models to determine actions to represent the nonlinear behavior of economic and political systems and rule-based routing algorithms to represent landscape processes. A cellular model for the development of New Orleans illustrates this approach, with routing algorithms for river and hurricane-storm surge determining flood extent, five markets (home, labor, hotel, tourism and port services) connecting seven types of economic agents (home buyers/laborers, home developers, hotel owners/ employers, hotel developers, tourists, port services developer and port services owners/employers), building of levees or a river spillway by political agents and damage to homes, hotels or port services within cells determined by the passage or depth of flood waters. The model reproduces historical aspects of New Orleans economic development and levee construction and the filtering of frequent small-scale floods at the expense of large disasters.

Impaired face processing in autism: fact or artifact?

PubMed

Jemel, Boutheina; Mottron, Laurent; Dawson, Michelle

2006-01-01

Within the last 10 years, there has been an upsurge of interest in face processing abilities in autism which has generated a proliferation of new empirical demonstrations employing a variety of measuring techniques. Observably atypical social behaviors early in the development of children with autism have led to the contention that autism is a condition where the processing of social information, particularly faces, is impaired. While several empirical sources of evidence lend support to this hypothesis, others suggest that there are conditions under which autistic individuals do not differ from typically developing persons. The present paper reviews this bulk of empirical evidence, and concludes that the versatility and abilities of face processing in persons with autism have been underestimated.

Using Self-Reflection To Increase Science Process Skills in the General Chemistry Laboratory

NASA Astrophysics Data System (ADS)

Veal, William R.; Taylor, Dawne; Rogers, Amy L.

2009-03-01

Self-reflection is a tool of instruction that has been used in the science classroom. Research has shown great promise in using video as a learning tool in the classroom. However, the integration of self-reflective practice using video in the general chemistry laboratory to help students develop process skills has not been done. Immediate video feedback and direct instruction were employed in a general chemistry laboratory course to improve students' mastery and understanding of basic and advanced process skills. Qualitative results and statistical analysis of quantitative data proved that self-reflection significantly helped students develop basic and advanced process skills, yet did not seem to influence the general understanding of the science content.

Neural assembly models derived through nano-scale measurements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, Hongyou; Branda, Catherine; Schiek, Richard Louis

2009-09-01

This report summarizes accomplishments of a three-year project focused on developing technical capabilities for measuring and modeling neuronal processes at the nanoscale. It was successfully demonstrated that nanoprobes could be engineered that were biocompatible, and could be biofunctionalized, that responded within the range of voltages typically associated with a neuronal action potential. Furthermore, the Xyce parallel circuit simulator was employed and models incorporated for simulating the ion channel and cable properties of neuronal membranes. The ultimate objective of the project had been to employ nanoprobes in vivo, with the nematode C elegans, and derive a simulation based on the resultingmore » data. Techniques were developed allowing the nanoprobes to be injected into the nematode and the neuronal response recorded. To the authors's knowledge, this is the first occasion in which nanoparticles have been successfully employed as probes for recording neuronal response in an in vivo animal experimental protocol.« less

Utilizing role theory to help employed parents cope with children's chronic illness.

PubMed

Major, Debra A

2003-02-01

Role theory is utilized to detail a six-step process for developing balanced coping through role negotiation. As applied in this paper, the role theory framework provides health educators with a useful tool for helping employed parents cope with a child's chronic illness. The emphasis is on partnering with parents or primary caregivers to identify, understand and manage the multiple role demands of working parents with chronically ill children. Role theory suggests ways health educators can support balanced coping by educating families about the demands of a child's illness, and helping to reduce those demands, helping to increase family resources, supporting parents and facilitating role negotiation. The ultimate goal is the development of balanced coping strategies that (1) meet the medical and emotional needs of the ill child, (2) allow parents to maintain their physical and mental health, and (3) enable parents to meet the demands of their other roles (e.g. paid employment).

Reversing the conventional leather processing sequence for cleaner leather production.

PubMed

Saravanabhavan, Subramani; Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni; Ramasami, Thirumalachari

2006-02-01

Conventional leather processing generally involves a combination of single and multistep processes that employs as well as expels various biological, inorganic, and organic materials. It involves nearly 14-15 steps and discharges a huge amount of pollutants. This is primarily due to the fact that conventional leather processing employs a "do-undo" process logic. In this study, the conventional leather processing steps have been reversed to overcome the problems associated with the conventional method. The charges of the skin matrix and of the chemicals and pH profiles of the process have been judiciously used for reversing the process steps. This reversed process eventually avoids several acidification and basification/neutralization steps used in conventional leather processing. The developed process has been validated through various analyses such as chromium content, shrinkage temperature, softness measurements, scanning electron microscopy, and physical testing of the leathers. Further, the performance of the leathers is shown to be on par with conventionally processed leathers through bulk property evaluation. The process enjoys a significant reduction in COD and TS by 53 and 79%, respectively. Water consumption and discharge is reduced by 65 and 64%, respectively. Also, the process benefits from significant reduction in chemicals, time, power, and cost compared to the conventional process.

The Development and Evaluation of a Reading Comprehension Strategy with Learning Disabled Students.

ERIC Educational Resources Information Center

Flaro, Lloyd

1987-01-01

Discusses a learning strategy, employing imaginal processes and verbal mediations procedures, designed to improve reading comprehension in 24 learning disabled students. Indicates significant gains and improvement in reading comprehension over a 15 week treatment period. (MM)

Group Process as Drama.

ERIC Educational Resources Information Center

McLeod, John

1984-01-01

Suggests that drama, as well as training or therapy, may be employed as a useful research and practice paradigm in working with small groups. The implications of this view for group development as a whole, and for member and leader participation, are explored. (JAC)

28 CFR 42.605 - Agency processing of complaints of employment discrimination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... employment discrimination. 42.605 Section 42.605 Judicial Administration DEPARTMENT OF JUSTICE NONDISCRIMINATION; EQUAL EMPLOYMENT OPPORTUNITY; POLICIES AND PROCEDURES Procedures for Complaints of Employment Discrimination Filed Against Recipients of Federal Financial Assistance § 42.605 Agency processing of complaints...

20 CFR 10.914 - What are the responsibilities of the employing agency in the death gratuity payment process?

Code of Federal Regulations, 2010 CFR

2010-04-01

... employing agency in the death gratuity payment process? 10.914 Section 10.914 Employees' Benefits OFFICE OF... responsibilities of the employing agency in the death gratuity payment process? Because some of the information... process. These responsibilities are as follows: (a) The agency must completely fill out form CA-42...

25 CFR 63.17 - How does an employer determine suitability for employment and efficiency of service?

Code of Federal Regulations, 2011 CFR

2011-04-01

... and efficiency of service? 63.17 Section 63.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE... and efficiency of service? (a) Adjudication is the process employers use to determine suitability for employment and efficiency of service. The adjudication process protects the interests of the employer and the...

The Purpose of the PhD: Theorising the Skills Acquired by Students

ERIC Educational Resources Information Center

Mowbray, Susan; Halse, Christine

2010-01-01

In the past decade there has been a marked push for the development of employability skills to be part of the PhD process. This push is generally by stakeholders from above and outside the PhD process, i.e. government and industry, who view skills as a "summative product" of the PhD. In contrast, our study interviewed stakeholders inside…

An Investigation of the Artifacts and Process of Constructing Computers Games about Environmental Science in a Fifth Grade Classroom

ERIC Educational Resources Information Center

Baytak, Ahmet; Land, Susan M.

2011-01-01

This study employed a case study design (Yin, "Case study research, design and methods," 2009) to investigate the processes used by 5th graders to design and develop computer games within the context of their environmental science unit, using the theoretical framework of "constructionism." Ten fifth graders designed computer games using "Scratch"…

A case for internal migration policy in India.

PubMed

Ram, S

1993-01-01

Migration helps to minimize regional, socioeconomic, and cultural disparities, and is considered to be an integral component of the development process. Migration helps to diffuse development, technology, and innovations from more developed areas or cities to rural or less developed areas. Little attention, however, has been paid to migration policy in India. Most studies on migration in India either describe the patterns of migration or analyze reasons for the moves. This paper discusses why migration takes place, what are the consequences of migration, whether India has a migration policy, whether India needs a migration policy, and what type of policy is required. The development and entrenchment of urban slums in India is related to the country's lack of migration policy. A two-pronged policy on migration is thus proposed which would ensure employment opportunities and an improved standard of living in rural areas, while taking into account the planning of cities and city surroundings. Rural areas and small towns need to be provided with more employment opportunities, financial and technological support to process raw materials, infrastructure for agricultural service centers, better education and other facilities to improve local living standards, and the diffusion of industries from big cities to district headquarters and medium-size towns. Commensurate efforts should be made in urban centers to prevent the future development of slums.

College binge drinking: deviant versus mainstream behavior.

PubMed

Leppel, Karen

2006-01-01

College binge drinking is examined from the perspectives of two cultures. The traditional culture views binging as deviant; the second culture promotes it. In this context, logit regression is used to explore the effects of various factors, including student employment and parental education. Employed students are less likely to binge than are students who are not employed. Also, students whose mother is a college graduate, but whose father is not, are more likely to binge than other students. The prescriptions for reducing binge drinking are different when the behavior is perceived as mainstream rather than deviant. The research calls for the development of a process for promoting cultural change in an environment of continually changing student leadership.

Development of a continuous process for α-thio-β-chloroacrylamide synthesis with enhanced control of a cascade transformation

PubMed Central

Dennehy, Olga C; Cacheux, Valérie M Y; Deadman, Benjamin J; Lynch, Denis

2016-01-01

A continuous process strategy has been developed for the preparation of α-thio-β-chloroacrylamides, a class of highly versatile synthetic intermediates. Flow platforms to generate the α-chloroamide and α-thioamide precursors were successfully adopted, progressing from the previously employed batch chemistry, and in both instances afford a readily scalable methodology. The implementation of the key α-thio-β-chloroacrylamide casade as a continuous flow reaction on a multi-gram scale is described, while the tuneable nature of the cascade, facilitated by continuous processing, is highlighted by selective generation of established intermediates and byproducts. PMID:28144320

Computer simulation of surface and film processes

NASA Technical Reports Server (NTRS)

Tiller, W. A.; Halicioglu, M. T.

1983-01-01

Adequate computer methods, based on interactions between discrete particles, provide information leading to an atomic level understanding of various physical processes. The success of these simulation methods, however, is related to the accuracy of the potential energy function representing the interactions among the particles. The development of a potential energy function for crystalline SiO2 forms that can be employed in lengthy computer modelling procedures was investigated. In many of the simulation methods which deal with discrete particles, semiempirical two body potentials were employed to analyze energy and structure related properties of the system. Many body interactions are required for a proper representation of the total energy for many systems. Many body interactions for simulations based on discrete particles are discussed.

Diversionary device history and revolutionary advancements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Paul W.; Grubelich, Mark Charles

Diversionary devices also known as flash bangs or stun grenades were first employed about three decades ago. These devices produce a loud bang accompanied by a brilliant flash of light and are employed to temporarily distract or disorient an adversary by overwhelming their visual and auditory senses in order to gain a tactical advantage. Early devices that where employed had numerous shortcomings. Over time, many of these deficiencies were identified and corrected. This evolutionary process led to today's modern diversionary devices. These present-day conventional diversionary devices have undergone evolutionary changes but operate in the same manner as their predecessors. Inmore » order to produce the loud bang and brilliant flash of light, a flash powder mixture, usually a combination of potassium perchlorate and aluminum powder is ignited to produce an explosion. In essence these diversionary devices are small pyrotechnic bombs that produce a high point-source pressure in order to achieve the desired far-field effect. This high point-source pressure can make these devices a hazard to the operator, adversaries and hostages even though they are intended for 'less than lethal' roles. A revolutionary diversionary device has been developed that eliminates this high point-source pressure problem and eliminates the need for the hazardous pyrotechnic flash powder composition. This new diversionary device employs a fuel charge that is expelled and ignited in the atmosphere. This process is similar to a fuel air or thermobaric explosion, except that it is a deflagration, not a detonation, thereby reducing the overpressure hazard. This technology reduces the hazard associated with diversionary devices to all involved with their manufacture, transport and use. An overview of the history of diversionary device development and developments at Sandia National Laboratories will be presented.« less

Automation of sample processing for ICP-MS determination of 90Sr radionuclide at ppq level for nuclear technology and environmental purposes.

PubMed

Kołacińska, Kamila; Chajduk, Ewelina; Dudek, Jakub; Samczyński, Zbigniew; Łokas, Edyta; Bojanowska-Czajka, Anna; Trojanowicz, Marek

2017-07-01

90 Sr is a widely determined radionuclide for environmental purposes, nuclear waste control, and can be also monitored in coolants in nuclear reactor plants. In the developed method, the ICP-MS detection was employed together with sample processing in sequential injection analysis (SIA) setup, equipped with a lab-on-valve with mechanized renewal of sorbent bed for solid-phase extraction. The optimized conditions of determination included preconcentration of 90 Sr on cation-exchange column and removal of different type of interferences using extraction Sr-resin. The limit of detection of the developed procedure depends essentially on the configuration of the employed ICP-MS spectrometer and on the available volume of the sample to be analyzed. For 1L initial sample volume, the method detection limit (MDL) value was evaluated as 2.9ppq (14.5BqL -1 ). The developed method was applied to analyze spiked river water samples, water reference materials, and also simulated and real samples of the nuclear reactor coolant. Copyright © 2016 Elsevier B.V. All rights reserved.

In-situ 3D visualization of composite microstructure during polymer-to-ceramic conversion

DOE PAGES

Larson, Natalie M.; Zok, Frank W.

2017-10-31

One route for producing fiber-reinforced ceramic-matrix composites entails repeated impregnation and pyrolysis of a preceramic polymer in a fiber preform. The process relies crucially on the development of networks of contiguous cracks during pyrolysis, thereby allowing further impregnation to attain nearly-full densification. The present study employs in-situ x-ray computed tomography (XCT) to reveal in three dimensions the evolution of matrix structure during pyrolysis of a SiC-based preceramic polymer to 1200 °C. Observations are used to guide the development of a taxonomy of crack geometries and crack structures and to identify the temporal sequence of their formation. A quantitative analysis ismore » employed to characterize effects of local microstructural dimensions on the conditions required to form cracks of various types. Complementary measurements of gas evolution and mass loss of the preceramic polymer during pyrolysis as well as changes in mass density and Young's modulus provide context for the physical changes revealed by XCT. Furthermore, the findings provide a foundation for future development of physics-based models to guide composite fabrication processes.« less

Implementing mental health peer support: a South Australian experience.

PubMed

Franke, Carmen C D; Paton, Barbara C; Gassner, Lee-Anne J

2010-01-01

Mental illness is among the greatest causes of disability, diminished quality of life and reduced productivity. Mental health policy aims to reform services to meet consumers' needs and one of the strategies is to increase the number of consumers working in the mental health service system. In South Australia, the Peer Work Project was established to provide a program for the training of consumers to work alongside mental health services. The project developed a flexible training pathway that consisted of an information session, the Introduction to Peer Work (IPW) course and further training pathways for peer workers. External evaluation indicated that the IPW course was a good preparation for peer workers, but a crucial factor in the implementation process of employing peer workers was commitment and leadership within the organisation in both preparing the organisation and supporting peer workers in their role. To assist organisations wanting to employ peer workers, a three step model was developed: prepare, train and support. The project has been successful in establishing employment outcomes for IPW graduates. The outcomes increased with time after graduation and there was a shift from voluntary to paid employment.

Using portfolios to introduce the clinical nurse leader to the job market.

PubMed

Norris, Tommie L; Webb, Sherry S; McKeon, Leslie M; Jacob, Susan R; Herrin-Griffith, Donna

2012-01-01

Development of a portfolio is an effective strategy used by clinical nurse leaders (CNLs) to inform prospective employers of their specialized skills in quality improvement, patient safety, error prevention, and teamwork. The portfolio provides evidence of competence relative to the role of clinician, outcomes manager, client advocate, educator, information manager, systems analyst/risk anticipator, team manager, healthcare professional, and lifelong learner. This article describes the CNL portfolio developed by experts from the University of Tennessee Health Science Center and Methodist LeBonheur Healthcare. Examples of portfolio documents generated throughout the master's entry CNL curriculum are provided, along with student experiences using the portfolio in the employment interview process.

Automated system for the on-line monitoring of powder blending processes using near-infrared spectroscopy. Part I. System development and control.

PubMed

Hailey, P A; Doherty, P; Tapsell, P; Oliver, T; Aldridge, P K

1996-03-01

An automated system for the on-line monitoring of powder blending processes is described. The system employs near-infrared (NIR) spectroscopy using fibre-optics and a graphical user interface (GUI) developed in the LabVIEW environment. The complete supervisory control and data analysis (SCADA) software controls blender and spectrophotometer operation and performs statistical spectral data analysis in real time. A data analysis routine using standard deviation is described to demonstrate an approach to the real-time determination of blend homogeneity.

The Next Revolution

ERIC Educational Resources Information Center

Bell, Carolyn Shaw

1975-01-01

The future status of women is envisioned as more than labor market projections of wider employment opportunities. Responsibilities of human beings such as family formation, upbringing of children, the process of human growth and development, marriage and divorce are seen as components of the second revolution. (Author/AM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

R.I. Rudyka; Y.E. Zingerman; K.G. Lavrov

Up-to-date mathematical methods, such as correlation analysis and expert systems, are employed in creating a model of the coking process. Automatic coking-control systems developed by Giprokoks rule out human error. At an existing coke battery, after introducing automatic control, the heating-gas consumption is reduced by {>=}5%.

Minimal impact, waterless decontamination technologies for improving food safety

USDA-ARS?s Scientific Manuscript database

Pathogen contamination of produce, meats, poultry, shellfish, and other foods remains an ongoing concern. Chemical sanitizers are widely employed for foods and food contact surfaces. However, there is growing interest in the development of minimal impact, waterless decontamination processes that wil...

Detoxifying Industrial Wastewaters

ERIC Educational Resources Information Center

Environmental Science and Technology, 1976

1976-01-01

Regional and supraregional treatment centers have been developed in Switzerland to cope with the problem of systematic toxic waste disposal. The process employed at the Fairtec Turgi plant is described beginning with delivery and storage and proceeding through treatment, reprecipitation, decontaminating cyanide, filtering sludge and ion-exchanger…

Discovery of rare mutations in populations: TILLING by sequencing

USDA-ARS?s Scientific Manuscript database

Discovery of rare mutations in populations requires methods for processing and analyzing in parallel many individuals. Previous TILLING methods employed enzymatic or physical discrimination of heteroduplexed from homoduplexed target DNA. We used mutant populations of rice and wheat to develop a meth...

The 'realities' of part-time nursing: a grounded theory study.

PubMed

Jamieson, Lynn N; Williams, Leonie Mosel; Lauder, William; Dwyer, Trudy

2008-10-01

To develop a theory that explains the 'realities' of part-time nursing. While little is known about the phenomenon of part-time nursing, increasing numbers of nurses work in part-time employment. Grounded theory. The problem that part-time nurses shared was an inability to achieve their personal optimal nursing potential. Motivators to work part-time, employment hours, specialty, individual and organizational factors formed contextual conditions that led to this problem. Part-time nurses responded to the challenges through a process of adaptation and adjustment. Harnessing the full productive potential of part-time nurses requires support to limit the difficulties that they encounter. The developed theory provides a valuable guide to managerial action. Nurse Managers need to consider the developed substantive theory when planning and managing nursing workforces.

Peer HIV/AIDS education with volunteer trishaw drivers in Yaan, People's Republic of China: process evaluation.

PubMed

Shuguang, Wang; Van de Ven, Paul

2003-08-01

Peer-based HIV prevention education has become increasingly popular in China. Few studies have explored culturally appropriate strategies or the effectiveness of this approach among the growing population of Chinese self-employed young people--a group quite vulnerable to HIV and other sexually transmissible infections. The findings presented here are from a process evaluation of a peer-led demonstration project with self-employed trishaw drivers in Yaan, China. This study examines sexual health message diffusion from 150 volunteers in a direct training group to 705 peers in an indirect training group. A key finding was that success in diffusing sexual health messages was significantly related to drivers' attachment to their subculture. The successful elements of the project augur well for the development of HIV peer education in the broader arena of self-employed young people in China and pose a challenge to the traditional approach of "official-led" peer education with its uniform prescription of officially sanctioned printed materials.

Real-time optical signal processors employing optical feedback: amplitude and phase control.

PubMed

Gallagher, N C

1976-04-01

The development of real-time coherent optical signal processors has increased the appeal of optical computing techniques in signal processing applications. A major limitation of these real-time systems is the. fact that the optical processing material is generally of a phase-only type. The result is that the spatial filters synthesized with these systems must be either phase-only filters or amplitude-only filters. The main concern of this paper is the application of optical feedback techniques to obtain simultaneous and independent amplitude and phase control of the light passing through the system. It is shown that optical feedback techniques may be employed with phase-only spatial filters to obtain this amplitude and phase control. The feedback system with phase-only filters is compared with other feedback systems that employ combinations of phase-only and amplitude-only filters; it is found that the phase-only system is substantially more flexible than the other two systems investigated.

Teachers' Attitude towards ICT Use in Secondary Schools: A Scale Development Study

ERIC Educational Resources Information Center

Aydin, Mehmet Kemal; Semerci, Ali; Gürol, Mehmet

2016-01-01

The current study aims to develop a valid and reliable instrument that measures secondary school teachers' attitudes towards ICT use in teaching and learning process. A cross-sectional survey design was employed with a group of 173 teachers. Based on the literature review, a pool of 21 items was proposed and reviewed by a board of experts. As to…

Chromosome Analysis

NASA Technical Reports Server (NTRS)

1998-01-01

Perceptive Scientific Instruments, Inc., provides the foundation for the Powergene line of chromosome analysis and molecular genetic instrumentation. This product employs image processing technology from NASA's Jet Propulsion Laboratory and image enhancement techniques from Johnson Space Center. Originally developed to send pictures back to earth from space probes, digital imaging techniques have been developed and refined for use in a variety of medical applications, including diagnosis of disease.

The Problems Posed and Models Employed by Primary School Teachers in Subtraction with Fractions

ERIC Educational Resources Information Center

Iskenderoglu, Tuba Aydogdu

2017-01-01

Students have difficulties in solving problems of fractions in almost all levels, and in problem posing. Problem posing skills influence the process of development of the behaviors observed at the level of comprehension. That is why it is very crucial for teachers to develop activities for student to have conceptual comprehension of fractions and…

Planning the Development of Measurement and Evaluation Services for Use in Occupational Programs at Postsecondary Institutions. Final Report.

ERIC Educational Resources Information Center

Sharon, Amiel T.; And Others

The purpose of this study was to obtain information that will make it possible to plan for the development of occupational competency assessment procedures in a rational manner, based on the expressed needs of occupational educators and employers. Eight fields were selected for scrutiny: Accounting, Agribusiness, Data Processing, Day Care,…

Developing questionnaires for educational research: AMEE Guide No. 87

PubMed Central

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Developing questionnaires for educational research: AMEE Guide No. 87.

PubMed

Artino, Anthony R; La Rochelle, Jeffrey S; Dezee, Kent J; Gehlbach, Hunter

2014-06-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure.

Working and Learning in a Field Excursion.

PubMed

Hole, Torstein Nielsen

2018-06-01

This study aimed to discern sociocultural processes through which students learn in field excursions. To achieve this aim, short-term ethnographic techniques were employed to examine how undergraduate students work and enact knowledge (or knowing) during a specific field excursion in biology. The students participated in a working practice that employed research methods and came to engage with various biological phenomena over the course of their work. A three-level analysis of the students' experiences focused on three processes that emerged: participatory appropriation, guided participation, and apprenticeship. These processes derive from advances in practice-oriented theories of knowing. Through their work in the field, the students were able to enact science autonomously; they engaged with peers and teachers in specific ways and developed new understandings about research and epistemology founded on their experiences in the field. Further discussion about the use of "practice" and "work" as analytical concepts in science education is also included.

Conducting a narrative analysis.

PubMed

Emden, C

1998-07-01

This paper describes the process of narrative analysis as undertaken within a nursing study on scholars and scholarship. If follows an earlier paper titled: Theoretical perspectives on narrative inquiry that described the influencing ideas of Bruner (1987) and Roof (1994) upon the same study. Analysis procedures are described here in sufficient detail for other researchers wishing to implement a similar approach to do so. The process as described has two main components: (A) strategies of 'core story creation' and 'employment'; and (B) issues and dilemmas of narrative analysis, especially relating to rigour. The ideas of Polkinghorne (1988), Mishler (1986), and Labov (in Mishler 1986a) are introduced in so far as they impinge upon the analysis process. These relate especially to the development of key terms, and to the analysis strategies of core story creation and employment. Outcomes of the study in question are termed 'Signposting the lived-world of scholarship'.

VAMPnets for deep learning of molecular kinetics.

PubMed

Mardt, Andreas; Pasquali, Luca; Wu, Hao; Noé, Frank

2018-01-02

There is an increasing demand for computing the relevant structures, equilibria, and long-timescale kinetics of biomolecular processes, such as protein-drug binding, from high-throughput molecular dynamics simulations. Current methods employ transformation of simulated coordinates into structural features, dimension reduction, clustering the dimension-reduced data, and estimation of a Markov state model or related model of the interconversion rates between molecular structures. This handcrafted approach demands a substantial amount of modeling expertise, as poor decisions at any step will lead to large modeling errors. Here we employ the variational approach for Markov processes (VAMP) to develop a deep learning framework for molecular kinetics using neural networks, dubbed VAMPnets. A VAMPnet encodes the entire mapping from molecular coordinates to Markov states, thus combining the whole data processing pipeline in a single end-to-end framework. Our method performs equally or better than state-of-the-art Markov modeling methods and provides easily interpretable few-state kinetic models.

77 FR 12882 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

78 FR 15741 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2013 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

77 FR 13635 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Allowable Charges for Agricultural Workers' Meals and Travel Subsistence Reimbursement, Including Lodging AGENCY: Employment and Training...

The plasma separation process as a pre-cursor for large scale radioisotope production

NASA Astrophysics Data System (ADS)

Stevenson, Nigel R.

2001-07-01

Radioisotope production generally employs either accelerators or reactors to convert stable (usually enriched) isotopes into the desired product species. Radioisotopes have applications in industry, environmental sciences, and most significantly in medicine. The production of many potentially useful radioisotopes is significantly hindered by the lack of availability or by the high cost of key enriched stable isotopes. To try and meet this demand, certain niche enrichment processes have been developed and commercialized. Calutrons, centrifuges, and laser separation processes are some of the devices and techniques being employed to produce large quantities of selective enriched stable isotopes. Nevertheless, the list of enriched stable isotopes in sufficient quantities remains rather limited and this continues to restrict the availability of many radioisotopes that otherwise could have a significant impact on society. The Plasma Separation Process is a newly available commercial technique for producing large quantities of a wide range of enriched isotopes and thereby holds promise of being able to open the door to producing new and exciting applications of radioisotopes in the future.

Development of permissible exposure limits: the California experience.

PubMed

Cohen, Richard; Steinmaus, Craig; Quinlan, Patricia; Ku, Robert; Cooper, Michael; Roberts, Tim

2006-01-01

The California OSHA Airborne Contaminant Advisory Committee reviewed several hundred substances and recommended occupational exposure limits with the intent of worker and employer protection. The model used offers important benefits. First, by allowing open meetings, the process was transparent, and input could be offered by concerned stakeholders. Second, the process was data-driven and, therefore, less susceptible to bias and error. Third, by incorporating members with backgrounds in toxicology, epidemiology, risk assessment, occupational medicine, and industrial hygiene, the process fostered a thorough and diverse assessment of substances.

A descriptive evaluation of CDC's LEAN Works! Leading employees to activity and nutrition--a Web-based employer tool for workplace obesity management.

PubMed

Roemer, Enid C; Liss-Levinson, Rivka C; Samoly, Daniel K; Guy, Gery P; Tabrizi, Maryam J; Beckowski, Meghan S; Pei, Xiaofei; Goetzel, Ron Z

2013-01-01

The study aim was to determine the utility of and satisfaction with a Centers for Disease Control and Prevention (CDC) Web-based employer tool, CDC's LEAN Works!, which provides evidence-based recommendations and promising practices for obesity prevention and control at worksites. This study examined employers' natural usage (i.e., without any study parameters on how, when, or how much to use the Web site and its resources) and impressions of the Web site. Employers of varying sizes, industry types, and levels of maturity in offering obesity management programs and from both private and public sectors were recruited to participate in the study. A convenience sample of 29 employers enrolled to participate. Participants were followed over a 12-month period. First impressions, bimonthly use of the Web site, and final assessments were collected using self-report surveys and individual interviews. Descriptive analyses were conducted. Almost all (96%) of participants reported a positive experience with the Web site, noting it provided a wealth of information. Most reported they planned to continue to use the Web site to develop (77%), implement (92%), and evaluate (85%) their obesity management programs. Aspects of the Web site that employers found valuable included a step-by-step implementation process, templates and toolkits, specific recommendations, and promising practices. CDC's LEAN Works! is a useful resource for employers wishing to develop and implement evidence-based workplace obesity prevention programs.

Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popova, Evdokia; Rodgers, Theron M.; Gong, Xinyi

A novel data science workflow is developed and demonstrated to extract process-structure linkages (i.e., reduced-order model) for microstructure evolution problems when the final microstructure depends on (simulation or experimental) processing parameters. Our workflow consists of four main steps: data pre-processing, microstructure quantification, dimensionality reduction, and extraction/validation of process-structure linkages. These methods that can be employed within each step vary based on the type and amount of available data. In this paper, this data-driven workflow is applied to a set of synthetic additive manufacturing microstructures obtained using the Potts-kinetic Monte Carlo (kMC) approach. Additive manufacturing techniques inherently produce complex microstructures thatmore » can vary significantly with processing conditions. Using the developed workflow, a low-dimensional data-driven model was established to correlate process parameters with the predicted final microstructure. In addition, the modular workflows developed and presented in this work facilitate easy dissemination and curation by the broader community.« less

Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data

DOE PAGES

Popova, Evdokia; Rodgers, Theron M.; Gong, Xinyi; ...

2017-03-13

A novel data science workflow is developed and demonstrated to extract process-structure linkages (i.e., reduced-order model) for microstructure evolution problems when the final microstructure depends on (simulation or experimental) processing parameters. Our workflow consists of four main steps: data pre-processing, microstructure quantification, dimensionality reduction, and extraction/validation of process-structure linkages. These methods that can be employed within each step vary based on the type and amount of available data. In this paper, this data-driven workflow is applied to a set of synthetic additive manufacturing microstructures obtained using the Potts-kinetic Monte Carlo (kMC) approach. Additive manufacturing techniques inherently produce complex microstructures thatmore » can vary significantly with processing conditions. Using the developed workflow, a low-dimensional data-driven model was established to correlate process parameters with the predicted final microstructure. In addition, the modular workflows developed and presented in this work facilitate easy dissemination and curation by the broader community.« less

Performance Evaluation of Existing Wedgewater and Vacuum-Assisted Bed Dewatering Systems

DTIC Science & Technology

1992-01-01

prior to dewatering by the wedgewater method. Of the 20 satisfied users, 11 preferred aerobic digestion , two employed anaerobic digestion, and seven...did not further process their sludge. Of the seven dissatisfied users, four used aerobic digestion and three employed anaerobic digestion. A meelic...queried, 11 employed aerobic digestion , two employed anaerobic digestion, and three did not process their sludge. Eight dissatisfied users employed

Graphic Communications--Commercial Photography. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for graphic communications--commercial photography. Each unit (with or without subunits) contains competencies and competency builders that identify the…

A Changing Information Environment Challenges Public Administrations.

ERIC Educational Resources Information Center

Otten, Klaus W.

1989-01-01

Describes ways in which information handling techniques will eventually be used in public administration, focusing on technologies that automate routine administrative processes and support decision making. The need to develop a long range concept for continued full employment of administrative staff is discussed. (two references) (CLB)

Machine Trades. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for machine trades. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

Dairy Producer. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for dairy producers. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

Law Enforcement. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for law enforcement. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

Beyond Perceptual Symbols: A Call for Representational Pluralism

ERIC Educational Resources Information Center

Dove, Guy

2009-01-01

Recent evidence from cognitive neuroscience suggests that certain cognitive processes employ perceptual representations. Inspired by this evidence, a few researchers have proposed that cognition is inherently perceptual. They have developed an innovative theoretical approach that rests on the notion of perceptual simulation and marshaled several…

Transportation Planning for Access to Jobs; Job Access and the Metropolitan Planning Process in Hartford, St. Louis, and Detroit

DOT National Transportation Integrated Search

1997-08-28

Federal, state, and local welfare reform initiatives may require the planning : and development of new and innovative public transportation services to ensure : that ex-welfare recipients have the needed mobility to reach employment : opportunities, ...

High speed ground penetrating radar for road pavement and bridge structural inspection and maintenance : final report.

DOT National Transportation Integrated Search

2016-06-30

The overarching objective of this research is the development of a systematic methodology of employing GPR, including instruments, subsequent data processing and interpretation that can be used regularly as part of a roadway pavement and bridge evalu...

Poultry Producer. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a poultry producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability…

Serials Control System Procedures and Policies.

ERIC Educational Resources Information Center

Schlembach, Mary C.

This document includes procedures and policies for a networked serials control system originally developed at the Grainger Engineering Library Information Center at the University of Illinois at Urbana-Champaign (UIUC). The serials control systems encompass serials processing, public service, and end-user functions. The system employs a…

Diesel Mechanics. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for diesel mechanics. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

Business Administration and Management. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for business administration and management is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The competency list consists of six…

Effect of cavity configuration on kerosene spark ignition in a scramjet combustor at Ma 4.5 flight condition

NASA Astrophysics Data System (ADS)

Bao, Heng; Zhou, Jin; Pan, Yu

2015-12-01

Spark ignition experiments of liquid kerosene are conducted in a scramjet model equipped with dual-cavities at Ma 4.5 flight condition with a stagnation temperature of 1032 K. The ignition ability of two cavities with different length is compared and analyzed based on the wall pressure distribution along the combustor and the thrust evolution. The experimental results indicate that the longer cavity (L/D=7) is more suitable than the smaller cavity (L/D=5) in spark ignition. When employing the smaller cavity, three steady combustion states are observed after spark ignition. The concept of 'local flame' is adopted to explain the expanding problem of weak combustion. The local equivalence ratio in the shear layer is the dominated factor in determining the developing process of local flame. The final steady combustion mode of the combustor is dependent on the flame developing process. When employing the longer cavity, the establishment of intense combustion state can be much easier.

Active vibration control testing of the SPICES program: final demonstration article

NASA Astrophysics Data System (ADS)

Dunne, James P.; Jacobs, Jack H.

1996-05-01

The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

Development of a Neural Network-Based Renewable Energy Forecasting Framework for Process Industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Soobin; Ryu, Jun-Hyung; Hodge, Bri-Mathias

2016-06-25

This paper presents a neural network-based forecasting framework for photovoltaic power (PV) generation as a decision-supporting tool to employ renewable energies in the process industry. The applicability of the proposed framework is illustrated by comparing its performance against other methodologies such as linear and nonlinear time series modelling approaches. A case study of an actual PV power plant in South Korea is presented.

20 CFR 655.208 - Temporary labor certification applications involving fraud or willful misrepresentation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Labor Certification Process for Logging Employment and Non-H-2A Agricultural Employment § 655.208... prior to a final temporary labor certification determination, or if it is learned that the employer or... employer or agent in writing of this referral. The OFLC Administrator shall continue to process the...

29 CFR 1640.7 - Processing of charges of employment discrimination filed with the EEOC.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with the EEOC. 1640.7 Section 1640.7 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... REHABILITATION ACT OF 1973 § 1640.7 Processing of charges of employment discrimination filed with the EEOC. (a) EEOC determination of jurisdiction. Upon receipt of a charge of employment discrimination, the EEOC...

29 CFR 1640.7 - Processing of charges of employment discrimination filed with the EEOC.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with the EEOC. 1640.7 Section 1640.7 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... REHABILITATION ACT OF 1973 § 1640.7 Processing of charges of employment discrimination filed with the EEOC. (a) EEOC determination of jurisdiction. Upon receipt of a charge of employment discrimination, the EEOC...

29 CFR 1640.7 - Processing of charges of employment discrimination filed with the EEOC.

Code of Federal Regulations, 2010 CFR

2010-07-01

... with the EEOC. 1640.7 Section 1640.7 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... REHABILITATION ACT OF 1973 § 1640.7 Processing of charges of employment discrimination filed with the EEOC. (a) EEOC determination of jurisdiction. Upon receipt of a charge of employment discrimination, the EEOC...

29 CFR 1640.7 - Processing of charges of employment discrimination filed with the EEOC.

Code of Federal Regulations, 2011 CFR

2011-07-01

... with the EEOC. 1640.7 Section 1640.7 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... REHABILITATION ACT OF 1973 § 1640.7 Processing of charges of employment discrimination filed with the EEOC. (a) EEOC determination of jurisdiction. Upon receipt of a charge of employment discrimination, the EEOC...

29 CFR 1640.7 - Processing of charges of employment discrimination filed with the EEOC.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with the EEOC. 1640.7 Section 1640.7 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... REHABILITATION ACT OF 1973 § 1640.7 Processing of charges of employment discrimination filed with the EEOC. (a) EEOC determination of jurisdiction. Upon receipt of a charge of employment discrimination, the EEOC...

Spitzer Space Telescope Sequencing Operations Software, Strategies, and Lessons Learned

NASA Technical Reports Server (NTRS)

Bliss, David A.

2006-01-01

The Space Infrared Telescope Facility (SIRTF) was launched in August, 2003, and renamed to the Spitzer Space Telescope in 2004. Two years of observing the universe in the wavelength range from 3 to 180 microns has yielded enormous scientific discoveries. Since this magnificent observatory has a limited lifetime, maximizing science viewing efficiency (ie, maximizing time spent executing activities directly related to science observations) was the key operational objective. The strategy employed for maximizing science viewing efficiency was to optimize spacecraft flexibility, adaptability, and use of observation time. The selected approach involved implementation of a multi-engine sequencing architecture coupled with nondeterministic spacecraft and science execution times. This approach, though effective, added much complexity to uplink operations and sequence development. The Jet Propulsion Laboratory (JPL) manages Spitzer s operations. As part of the uplink process, Spitzer s Mission Sequence Team (MST) was tasked with processing observatory inputs from the Spitzer Science Center (SSC) into efficiently integrated, constraint-checked, and modeled review and command products which accommodated the complexity of non-deterministic spacecraft and science event executions without increasing operations costs. The MST developed processes, scripts, and participated in the adaptation of multi-mission core software to enable rapid processing of complex sequences. The MST was also tasked with developing a Downlink Keyword File (DKF) which could instruct Deep Space Network (DSN) stations on how and when to configure themselves to receive Spitzer science data. As MST and uplink operations developed, important lessons were learned that should be applied to future missions, especially those missions which employ command-intensive operations via a multi-engine sequence architecture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carr, S.J.

The development of nuclear standards is an active and necessary endeavor that is concerned with the safe, orderly, and economic development of nuclear potential. There are almost 4100 people from the teachnical community who are presently involved either in writing nuclear standards, including codes, or in the management and processing roles necessary for their approval and promulgation. This document identifies the current participation of each individual as member, chairman, cochairman (vice-chairman), or secretary of about 700 standards development committees and groups. The standards committees and groups are identified with the organizations that are responsible for the preparation, review, and maintenancemore » of the standards and that provide support through supervisory committees and headquarters staff. This directory includes four major sections: personnel, employers, committees, and a Key-Word-in-Context (KWIC) Index of committee titles. It can also be used to identify the participation of employers as well as to recognize the contributions of individuals to the often interdisciplinary activity of standards development.« less

Vocal acoustic analysis as a biometric indicator of information processing: implications for neurological and psychiatric disorders.

PubMed

Cohen, Alex S; Dinzeo, Thomas J; Donovan, Neila J; Brown, Caitlin E; Morrison, Sean C

2015-03-30

Vocal expression reflects an integral component of communication that varies considerably within individuals across contexts and is disrupted in a range of neurological and psychiatric disorders. There is reason to suspect that variability in vocal expression reflects, in part, the availability of "on-line" resources (e.g., working memory, attention). Thus, understanding vocal expression is a potentially important biometric index of information processing, not only across but within individuals over time. A first step in this line of research involves establishing a link between vocal expression and information processing systems in healthy adults. The present study employed a dual attention experimental task where participants provided natural speech while simultaneously engaged in a baseline, medium or high nonverbal processing-load task. Objective, automated, and computerized analysis was employed to measure vocal expression in 226 adults. Increased processing load resulted in longer pauses, fewer utterances, greater silence overall and less variability in frequency and intensity levels. These results provide compelling evidence of a link between information processing resources and vocal expression, and provide important information for the development of an automated, inexpensive and uninvasive biometric measure of information processing. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

EEOC policy statement aids workers seeking to avoid arbitration. Equal Employment Opportunity Commission.

PubMed

1997-09-19

The Equal Employment Opportunity Commission (EEOC) issued a policy statement condemning a prevalent practice among U.S. employers--new hires are asked to sign an agreement obligating them to submit Americans with Disabilities Act (ADA) claims to binding arbitration. By signing the clause, an employee virtually forfeits his or her rights to bring an ADA claim to court. The EEOC compares these employment clauses to conditions of employment rather than voluntary agreements between worker and employer. Employers argue that the binding arbitration process is fast and equitable. Opponents argue that the process is unfair. The EEOC instructed its investigators to proceed with administrative charges regardless of whether or not the complainant signed a binding arbitration agreement. The EEOC policy statement argues against mandatory arbitration clauses, noting that the arbitration process limits the rights of employees and weighs heavily in favor of employers.

Monitoring and evaluation of patient involvement in clinical practice guideline development: lessons from the Multidisciplinary Guideline for Employment and Severe Mental Illness, the Netherlands.

PubMed

van der Ham, Alida J; van Erp, Nicole; Broerse, Jacqueline E W

2016-04-01

The aim of this study was to gain better insight into the quality of patient participation in the development of clinical practice guidelines and to contribute to approaches for the monitoring and evaluation of such initiatives. In addition, we explore the potential of a dialogue-based approach for reconciliation of preferences of patients and professionals in the guideline development processes. The development of the Multidisciplinary Guideline for Employment and Severe Mental Illness in the Netherlands served as a case study. Methods for patient involvement in guideline development included the following: four patient representatives in the development group and advisory committee, two focus group discussions with patients, a dialogue session and eight case studies. To evaluate the quality of patient involvement, we developed a monitoring and evaluation framework including both process and outcome criteria. Data collection included observations, document analysis and semi-structured interviews (n = 26). The quality of patient involvement was enhanced using different methods, reflection of patient input in the guideline text, a supportive attitude among professionals and attention to patient involvement throughout the process. The quality was lower with respect to representing the diversity of the target group, articulation of the patient perspective in the GDG, and clarity and transparency concerning methods of involvement. The monitoring and evaluation framework was useful in providing detailed insights into patient involvement in guideline development. Patient involvement was evaluated as being of good quality. The dialogue-based approach appears to be a promising method for obtaining integrated stakeholder input in a multidisciplinary setting. © 2015 John Wiley & Sons Ltd.

77 FR 29747 - Notice of Request for Information Collection Approval

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-18

... employment discrimination complaint form when processing Equal Employment Opportunity (EEO) discrimination.... SUPPLEMENTARY INFORMATION: Form Title: Individual Complaint of Employment Discrimination. OMB Control Number... information necessary to process EEO discrimination complaints filed by [[Page 29748

Workforce Development Act of 1995. Report together with Additional and Minority Views To Accompany S.143. 104th Congress, 1st Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

This congressional report addresses the Workforce Development Act of 1995 that would consolidate federal employment training programs and create a new process and structure for funding the programs. Contents include the following: a summary of the bill; background and need for the legislation; history of the legislation and votes in committee;…

Marketing the University to Student-Athletes: Understanding University Selection Criteria

ERIC Educational Resources Information Center

Judson, Kimberly M.; James, Jeffrey D.; Aurand, Timothy W.

2004-01-01

As competition for top athletes intensifies, and as challenges associated with recruitment increase, universities must develop and employ recruiting strategies based upon attributes that student-athletes identify as important to their decision-making process. The study investigates college choice decision attributes of student-athletes, identifies…

The French Revolution.

ERIC Educational Resources Information Center

Scrofani, E. Robert; Johnston, Anne

This 10-day unit on the French Revolution is designed to help high school students understand the interplay of economic, social, and political forces in the process of revolutionary change, and the development of modern democratic forms of government. Critical thinking and geographic skill activities are employed throughout the unit and include…

22 CFR 213.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... garnishment means the process by which federal agencies require a private sector employer to withhold up to 15... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Definitions. 213.2 Section 213.2 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT CLAIMS COLLECTION General § 213.2 Definitions. (a...

Commercial Truck/Equipment Technician. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for commercial truck and equipment technician is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The task list of the National…

Business Information Systems. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for business information systems is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The competency list consists of 10 units: (1) data…

Natural or Artificial: Is the Route of L2 Development Teachable?

ERIC Educational Resources Information Center

Zhang, Xian; Lantolf, James P.

2015-01-01

The current study was designed to assess the central claim of the Teachability Hypothesis (TH), a corollary of general Processability Theory (PT), which predicts instruction cannot alter posited universal, hierarchically organized psycholinguistic constraints behind PT's developmental sequences. We employed an interventional design, which adhered…

Industry and Education: A Winning Combination.

ERIC Educational Resources Information Center

Payne, John H.; Williams-Foster, Cathy

1997-01-01

Describes how the petrochemical employers of Texas City, Texas developed a fully accredited two-year associate degree program at the local community college tailored to train process operators for entry into the refining and chemical industry. Discusses planning; scholarship funds; vendor and community support; student population; outcomes of the…

Subliminal semantic priming in near absence of attention: A cursor motion study.

PubMed

Xiao, Kunchen; Yamauchi, Takashi

2015-12-15

The role of attention in subliminal semantic priming remains controversial: some researchers argue that attention is necessary for subliminal semantic priming, while others suggest that subliminal semantic processing is free from the influence of attention. The present study employs a cursor motion method to measure priming and evaluate the influence of attention. Specifically, by employing a semantic priming task developed by Naccache, Blandin, and Dehaene (2002), we investigate the extent to which top-down attention influences semantic priming. Results indicate that, consistent with the Naccache et al. (2002) results, attention facilitates priming. However, inconsistent with their theory, significant priming is still observed even in near absence of attention. We suggest that top-down attention helps but is not necessary for subliminal semantic processing. Copyright © 2015 Elsevier Inc. All rights reserved.

Electrodeposition for Electrochemical Energy Conversion and Storage Devices

NASA Astrophysics Data System (ADS)

Shaigan, Nima

Electrodeposition of metals, alloys, metal oxides, conductive polymers, and their composites plays a pivotal role in fabrication processes of some recently developed electrochemical energy devices, most particularly fuel cells, supercapacitors, and batteries. Unique nanoscale architectures of electrocatalysts for low temperature fuel cells, including proton exchange membrane fuel cell (PEMFC) and direct methanol fuel cell (DMFC), can only be obtained through electrodeposition processes. Promising, cost-effective conductive/protective coatings for stainless steel interconnects used in solid oxide fuel cells (SOFCs) have been achieved employing a variety of electrodeposition techniques. In supercapacitors, anodic deposition of metal oxides, conductive polymers, and their composites is a versatile technique for fabrication of electrodes with distinctive morphology and exceptional specific capacitance. Electrodeposition is also very recently employed for preparation of Sn-based anodes for lithium ion batteries.

77 FR 16157 - Changes to the Labor Certification Process for the Temporary Non-Agricultural Employment of H-2B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

... DEPARTMENT OF LABOR Employment and Training Administration 20 CFR Part 655 RIN 1205-AB58 Changes to the Labor Certification Process for the Temporary Non- Agricultural Employment of H-2B Aliens in the United States; Transition Period AGENCY: Employment and Training Administration, Department of...

75 FR 13784 - Announcement of Public Webinar on the Changes to the Labor Certification Process for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... DEPARTMENT OF LABOR Employment and Training Administration Announcement of Public Webinar on the Changes to the Labor Certification Process for the Temporary Agricultural Employment of H-2A Aliens in the... temporary or seasonal agricultural employment. See Temporary Agricultural Employment of H-2A Aliens in the...

77 FR 24137 - Changes to the Labor Certification Process for the Temporary Non-Agricultural Employment of H-2B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... DEPARTMENT OF LABOR Employment and Training Administration 20 CFR Part 655 RIN 1205-AB58 Changes to the Labor Certification Process for the Temporary Non- Agricultural Employment of H-2B Aliens in the United States; Revisions to Transition Period AGENCY: Employment and Training Administration...

Return to work following breast cancer treatment: the employers' side.

PubMed

Tiedtke, Corine; Donceel, Peter; de Rijk, Angelique; Dierckx de Casterlé, Bernadette

2014-09-01

Research on employers' experiences with return to work (RTW) of employees with breast cancer is lacking. Employers seem to be the key people to create good working conditions. Our aim is to explore how Belgian employers experience their role and responsibility in RTW of employees with breast cancer. Using a qualitative design (Grounded Theory) 17 employers from the public (7), private (5) and non-profit (5) sector, directly involved in the RTW process, were interviewed. The analysis was based on the Qualitative Analysis Guide of Leuven (QUAGOL) with constant data comparison and interactive team dialogue as important guiding characteristics. RTW of employees with breast cancer is experienced by employers as an intangible process that is difficult to manage. This was expressed in (1) concern, referring to the employer's personal and emotional involvement, (2) uncertainty about the course of illness and the guidance needed by the employee and (3) specific dilemmas in the RTW process (when does one infringe on employee privacy; employee vs. organization interest; employers' personal vs. professional role). The degree to which this was experienced related to variety in organizational, employer, and employee factors. The findings of this study confirm the importance of the employer's involvement in RTW of employees with breast cancer and contribute to a better understanding of its complexity. The employers did their best to grasp the intangibility of the RTW process. Further research is needed to refine these findings and to discover the specific needs of employers regarding supporting RTW of breast cancer patients.

Development of an Online Smartphone-Based eLearning Nutrition Education Program for Low-Income Individuals.

PubMed

Stotz, Sarah; Lee, Jung Sun

2018-01-01

The objective of this report was to describe the development process of an innovative smartphone-based electronic learning (eLearning) nutrition education program targeted to Supplemental Nutrition Assistance Program-Education-eligible individuals, entitled Food eTalk. Lessons learned from the Food eTalk development process suggest that it is critical to include all key team members from the program's inception using effective inter-team communication systems, understand the unique resources needed, budget ample time for development, and employ an iterative development and evaluation model. These lessons have implications for researchers and funding agencies in developing an innovative evidence-based eLearning nutrition education program to an increasingly technology-savvy, low-income audience. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

The concept and science process skills analysis in bomb calorimeter experiment as a foundation for the development of virtual laboratory of bomb calorimeter

NASA Astrophysics Data System (ADS)

Kurniati, D. R.; Rohman, I.

2018-05-01

This study aims to analyze the concepts and science process skills in bomb calorimeter experiment as a basis for developing the virtual laboratory of bomb calorimeter. This study employed research and development method (R&D) to gain the answer to the proposed problems. This paper discussed the concepts and process skills analysis. The essential concepts and process skills associated with bomb calorimeter are analyze by optimizing the bomb calorimeter experiment. The concepts analysis found seven fundamental concepts to be concerned in developing the virtual laboratory that are internal energy, burning heat, perfect combustion, incomplete combustion, calorimeter constant, bomb calorimeter, and Black principle. Since the concept of bomb calorimeter, perfect and incomplete combustion created to figure out the real situation and contain controllable variables, in virtual the concepts displayed in the form of simulation. Meanwhile, the last four concepts presented in the form of animation because no variable found to be controlled. The process skills analysis detect four notable skills to be developed that are ability to observe, design experiment, interpretation, and communication skills.

Occupational safety and health in the USA: now and the future.

PubMed

Howard, John; Hearl, Frank

2012-01-01

In the USA, national worker protection legislation was enacted in 1970. The legislation required that research, recommendations and guidance be developed to aid employers and workers, that workplace health and safety standards be adopted, that employer comply with those rules and that the government police employer compliance, and that assistance be offered to employers and workers to help them maintain a safe and healthful workplace. In the 40 yr since passage of the Occupational Safety and Health Act of 1970, worker injury, illness and fatalities have declined but not been eliminated. Efforts to accelerate the standards adoption process are much discussed in the USA along with how to protect workers from emerging hazards like nanotechnology. New strategies which seek to eliminate not only the causes of work-related injury and illness, but also more broadly, worker injury and illness, are on the horizon.

[Publicly employed physicians--war years and post-war judicial process].

PubMed

Schiøtz, A

1995-12-10

During the Second World War, publicly employed medical officers in Norway were given a role which disharmonized in many ways with the role they had before 9 April 1940. They had been employed on terms which included loyalty towards employer, colleagues and patients. After the outbreak of the war and for five years to come, loyalties were put to the test. At the same time their actual services became more demanding. Their daily work was complicated by various laws and regulations, and the political situation in general hindered personal and professional development and free communication between doctors and patients, and between colleagues. After the war the central medical administration was relentless and the sanctions against those who had supported the occupying powers were exceptionally hard. The author emphasizes the doctors' personal experiences during the war and the first postwar years. The most important sources are personal testimonies, as they come forth in public records, biographies and interviews.

Development and application of transgenic technologies in cassava.

PubMed

Taylor, Nigel; Chavarriaga, Paul; Raemakers, Krit; Siritunga, Dimuth; Zhang, Peng

2004-11-01

The capacity to integrate transgenes into the tropical root crop cassava (Manihot esculenta Crantz) is now established and being utilized to generate plants expressing traits of agronomic interest. The tissue culture and gene transfer systems currently employed to produce these transgenic cassava have improved significantly over the past 5 years and are assessed and compared in this review. Programs are underway to develop cassava with enhanced resistance to viral diseases and insects pests, improved nutritional content, modified and increased starch metabolism and reduced cyanogenic content of processed roots. Each of these is described individually for the underlying biology the molecular strategies being employed and progress achieved towards the desired product. Important advances have occurred, with transgenic plants from several laboratories being prepared for field trails.

Can Rural Employment Benefit from Changing Labor Skills in U.S. Processed Food Trade?

ERIC Educational Resources Information Center

Schluter, Gerald; Lee, Chinkook

2002-01-01

The 1990s saw a gain in rural food-processing employment, particularly meat packing and poultry processing, as the industry's demand for low-skilled workers increased. Analysis links the change in worker skills to international trade. While increased rural employment may seem beneficial, the jobs often do not appeal to rural domestic workers, and…

20 CFR 668.700 - What process must an INA grantee use to plan its employment and training services?

Code of Federal Regulations, 2010 CFR

2010-04-01

... it uses to plan other activities and services. (b) However, in the process of preparing its Two Year... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What process must an INA grantee use to plan its employment and training services? 668.700 Section 668.700 Employees' Benefits EMPLOYMENT AND...

Assessment of the Economic Structure of Brazilian Agribusiness.

PubMed

Rodrigues Moreira, Vilmar; Kureski, Ricardo; Pereira da Veiga, Claudimar

2016-01-01

This paper presents an economic assessment of Brazilian agribusiness and its relationship with other economic sectors. It was found that, in 2011, agribusiness had a share of 18.45% (basic prices) and 19.77% (market prices) of Brazilian GDP. The tax burden of agribusiness (20.68%) was higher than that of other sectors (13.59%), despite agribusiness being a major contributor to the generation of foreign exchange, employment, and essential products, such as food. Brazilian agribusiness is a major employer, responsible for 29.39% of national employment. However, its average income is lower than in the other sectors of the Brazilian economy. Finally, agribusiness was found to be the biggest generator of foreign exchange, with a positive balance of trade. It was possible to conclude that agribusiness forms a strong link between agriculture and livestock, industry, and services in other economic sectors. For this reason, it can be said that the development of agribusiness is highly relevant to the process of Brazilian economic development and is therefore important to the progress of economic policies.

Curriculum & Instruction: Curriculum Outcomes, Learning Plan Negotiation, Career Explorations, Projects, Learning & Skill Building Levels, Competencies, Student Journals, Employer Seminars, Learning Resources. Handbook for Experience-Based Career Education.

ERIC Educational Resources Information Center

Anderson, Nancy; And Others

This is one of a set of five handbooks compiled by the Northwest Regional Educational Laboratory which describes the processes for planning and operating a total Experience-Based Career Education (EBCE) program. Processes and material are those developed by the original EBCE model--Community Experiences in Career Education or (CE)2. The area of…

[Optimizing histological image data for 3-D reconstruction using an image equalizer].

PubMed

Roth, A; Melzer, K; Annacker, K; Lipinski, H G; Wiemann, M; Bingmann, D

2002-01-01

Bone cells form a wired network within the extracellular bone matrix. To analyse this complex 3D structure, we employed a confocal fluorescence imaging procedure to visualize live bone cells within their native surrounding. By means of newly developed image processing software, the "Image-Equalizer", we aimed to enhanced the contrast and eliminize artefacts in such a way that cell bodies as well as fine interconnecting processes were visible.

Implementation Science and Employer Disability Practices: Embedding Implementation Factors in Research Designs.

PubMed

Main, Chris J; Nicholas, Michael K; Shaw, William S; Tetrick, Lois E; Ehrhart, Mark G; Pransky, Glenn

2016-12-01

Purpose For work disability research to have an impact on employer policies and practices it is important for such research to acknowledge and incorporate relevant aspects of the workplace. The goal of this article is to summarize recent theoretical and methodological advances in the field of Implementation Science, relate these to research of employer disability management practices, and recommend future research priorities. Methods The authors participated in a year-long collaboration culminating in an invited 3-day conference, "Improving Research of Employer Practices to Prevent Disability", held October 14-16, 2015, in Hopkinton, MA, USA. The collaboration included a topical review of the literature, group conference calls to identify key areas and challenges, drafting of initial documents, review of industry publications, and a conference presentation that included feedback from peer researchers and a question/answer session with a special panel of knowledge experts with direct employer experience. Results A 4-phase implementation model including both outer and inner contexts was adopted as the most appropriate conceptual framework, and aligned well with the set of process evaluation factors described in both the work disability prevention literature and the grey literature. Innovative interventions involving disability risk screening and psychologically-based interventions have been slow to gain traction among employers and insurers. Research recommendations to address this are : (1) to assess organizational culture and readiness for change in addition to individual factors; (2) to conduct process evaluations alongside controlled trials; (3) to analyze decision-making factors among stakeholders; and (4 ) to solicit input from employers and insurers during early phases of study design. Conclusions Future research interventions involving workplace support and involvement to prevent disability may be more feasible for implementation if organizational decision-making factors are imbedded in research designs and interventions are developed to take account of these influences.

A Comparison of Learning Disabled and Nondisabled Adolescent Motivational Processes.

ERIC Educational Resources Information Center

Golumbia, Linda R.; Hillman, Stephen B.

This research explored cognitive-motivational patterns of learning-disabled and nondisabled adolescents by employing the theoretical model of C. S. Dweck, which posits that a "learning goal" orients students toward the development of competence, whereas a "performance goal" orients students toward the documentation of competence, and that these…

Dynamics of Change in Research Work: Constructing a New Research Area in a Research Group.

ERIC Educational Resources Information Center

Saari, Eveliina; Miettinen, Reijo

2001-01-01

Studies how an aerosol technology research group constructed a research agenda for itself and how its activity was changed in the process. Analyzes the development of the production of ultrafine particles and employs the concept of mediated activity. (Contains 29 references.) (DDR)

The Gaston System: A Community Plans for the Future.

ERIC Educational Resources Information Center

Smyre, Rick

1987-01-01

In response to pervasive problems of low income, anticipated loss of employment in the textile industry, high dropout rates, high crime rates, and poor relationships among municipalities, Gaston County, North Carolina, has developed an innovative set of processes for promoting cooperation and facilitating leadership techniques. The Gaston System…

Math + Science: A Solution. Introductory Investigations. Book 1.

ERIC Educational Resources Information Center

Wiebe, Arthur, Ed.; And Others

Developed for use primarily with middle school age students, this introductory booklet provides a sample of innovative activities that integrate mathematics skills with science processes. The investigations employ a wide variety of readily available and easily understood materials. The 25 activities are sequenced from simple to complex according…

AIDS Education and Citizenship Development in a University/K-12 Partnership.

ERIC Educational Resources Information Center

Mitchell, James M.

The move toward standards-based instruction calls for greater student involvement in the learning process. Cooperative learning is widely used as many standards-based school departments advocate greater employment of constructivist classrooms as the most appropriate vehicle of instruction. During academic year 2002-03, 42 students from California…

Fertilizer/Chemical Sales and Service Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for fertilizer/chemical sales and service workers. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational,…

Careers Under Construction: Models for Developing Career Ladders.

ERIC Educational Resources Information Center

2003

This publication describes resources and processes that are a catalyst for discussion and action for local workforce investment partners--employers, training providers, and workers--to plan and implement regional career ladder programs. Section 1 discusses career ladders and uses. Section 2 describes how to build an industry career ladder or…

Evolving Agents as a Metaphor for the Developing Child

ERIC Educational Resources Information Center

Schlesinger, Matthew

2004-01-01

The emerging field of Evolutionary Computation (EC), inspired by neo-Darwinian principles (e.g. natural selection, mutation, etc.), offers developmental psychologists a wide array of mathematical tools for simulating ontogenetic processes. In this brief review, I begin by highlighting three of the approaches that EC researchers employ (Artificial…

Investing in Youth: Brazil

ERIC Educational Resources Information Center

OECD Publishing, 2014

2014-01-01

The series Investing in Youth builds on the expertise of the Organisation for Economic Cooperation and Development (OECD) on youth employment, social support and skills. It covers both OECD countries and countries in the process of accession to the OECD, as well as some emerging economies. This report provides a detailed diagnosis of the youth…

Track-Before-Declare Methods in IR Image Sequences

DTIC Science & Technology

1992-09-01

processing methods of this type, known as track- before-declare (TBD), and sometimes by the misleading term track - before - detect , have been employed in systems...Electronic Systems, Vol. AES-il, No. 6. November 1975. 8. A. Corbeil, J. DiDomizio, Track - Before - Detect Development and Demonstration Program, Phase

Is Maternal Marriage Beneficial for Low-Income Adolescents?

ERIC Educational Resources Information Center

Bachman, Heather J.; Coley, Rebekah Levine; Chase-Lansdale, P. Lindsay

2009-01-01

The present study investigated the association of mothers' marriage and changes in young adolescents' cognitive and socioemotional development and changes in family processes. Analyses employed longitudinal data from the "Three-City Study" to track maternal partnerships for 860 low-income adolescents (10-14 years-old in Wave 1) across a…

Entrepreneurial Careers of Women in Zimbabwe

ERIC Educational Resources Information Center

Ncube, Lisa B.; Greenan, James P.

2003-01-01

The purpose of this study was to investigate the pathways of entrepreneurial career development and the processes involved for women to become entrepreneurs in Zimbabwe. Women entrepreneurs were studied to gain an understanding of why women chose self-employment and how local enterprise programs should be designed to benefit them. The study…

Implementing Student-Centered Transition in Maine Schools: Guidelines for Developing Procedures and Practices.

ERIC Educational Resources Information Center

University of Southern Maine, Portland. Human Services Development Inst.

A deliberate, systematic approach is presented for assisting students with handicaps through the transition process from school to adult life. The key elements of transition are identified as: longitudinal vocational and independent living skills training; cooperative and interagency transition planning; parent, student, employer, and…

Regional Needs Analysis Report. 2011

ERIC Educational Resources Information Center

Washington Higher Education Coordinating Board, 2011

2011-01-01

The Higher Education Coordinating Board (HECB) is required to develop a comprehensive and ongoing needs assessment process to analyze demand for additional degrees and programs [RCW 28B.76.230 (1)]. This report fulfills a portion of that mandate by focusing on employer demand on the regional level, but also includes additional information on…

Ethnic and Demographic Variables and Achievement Scores of Preschool Children

ERIC Educational Resources Information Center

Scott, Ralph; Smith, James E.

1972-01-01

Findings suggest that family environmental process variables, as well as Ss' gain scores on the Concepts subtest of the Iowa Test of Preschool Development, are particularly sensitive measures than can be employed to identify children who are, or are not, profiting from cognitive-enrichment programs. (Author)

Tailoring the Interview Process for More Effective Personnel Selection.

ERIC Educational Resources Information Center

Saville, Anthony

Structuring the initial teacher employment interview adds validity to selection and appropriately utilizes human resources. Five aspects of an effective interview program include: (1) developing a job analysis plan; (2) reviewing the applications; (3) planning for the interview; (4) the interview instrument; and (5) legal implications. An…

Digital Story Creation: Its Impact towards Academic Performance

ERIC Educational Resources Information Center

Ong, Charito G.

2017-01-01

When students are engaged in the process of creating a digital story, they synthesize a variety of literacy skills for the authentic product: researching, writing, organizing, presenting, interviewing, problem-solving, assessing, as well as employing interpersonal and technology skills (Baggett, 2007). With all these skills to be developed among…

Investing in Youth: Latvia

ERIC Educational Resources Information Center

OECD Publishing, 2015

2015-01-01

The series Investing in Youth builds on the expertise of the Organisation for Economic Cooperation and Development (OECD) on youth employment, social support and skills. It covers both OECD countries and countries in the process of accession to the OECD, as well as some emerging economies. This report provides a detailed diagnosis of the youth…

Development of microchannel plate x-ray optics

NASA Technical Reports Server (NTRS)

Kaaret, Philip

1995-01-01

The goal of this research program was to develop a novel technique for focusing x-rays based on the optical system of a lobster's eye. A lobster eye employs many closely packed reflecting surfaces arranged within a spherical or cylindrical shell. These optics have two unique properties: they have unlimited fields of view and can be manufactured via replication of identical structures. Because the angular resolution is given by the ratio of the size of the individual optical elements to the focal length, optical elements with size on the order of one hundred microns are required to achieve good angular resolution with a compact telescope. We employed anisotropic etching of single crystal silicon wafers for the fabrication of micron-scale optical elements. This technique, commonly referred to as silicon micromachining, is based on silicon fabrication techniques developed by the microelectronics industry. We have succeeded in producing silicon lenses with a geometry suitable for a 1-d focusing x-ray optics. These lenses have an aspect ratio (40:1) suitable for x-ray reflection and have very good optical surface alignment. We have developed a number of process refinements which improved the quality of the lens geometry and the repeatability of the etch process. In addition to the silicon fabrication, an x-ray beam line was constructed at Columbia for testing the optics. Most recently, we have done several experiments to find the fundamental limits that the anisotropic etch process placed on the etched surface roughness.

20 CFR 10.118 - Does the employer participate in the claims process in any other way?

Code of Federal Regulations, 2010 CFR

2010-04-01

... of Proof § 10.118 Does the employer participate in the claims process in any other way? (a) The employer is responsible for submitting to OWCP all relevant and probative factual and medical evidence in... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Does the employer participate in the claims...

Ceramic waste form production and development at ANL-West.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Battisti, T. J.; Goff, K. M.; Bateman, K. J.

2002-08-21

Argonne National Laboratory has developed a method to stabilize spent electrolyte salt discarded from electrorefiners (ER) used to treat spent nuclear fuel. The salt is stabilized in a ceramic using a pressureless consolidation technique. The starting material is zeolite 4A which is used as the host for the fission product and actinide rich salt. Glass frit is added to the salt loaded zeolite before processing to act as a binder. The zeolite 4A is converted to sodalite during processing via pressureless consolidation. This process differs from one used in the past that employed a hot isostatic press. Ceramic is createdmore » at 925 C and atmospheric pressure instead of the high pressures used in hot isostatic pressing. Process flow sheets, off-gas test results, processing equipment, and leech test results are presented.« less

Development of a toolkit to enhance care processes for people with a long-term neurological condition: a qualitative descriptive study.

PubMed

Sezier, Ann; Mudge, Suzie; Kayes, Nicola; Kersten, Paula; Payne, Deborah; Harwood, Matire; Potter, Eden; Smith, Greta; McPherson, Kathryn M

2018-06-30

To (A) explore perspectives of people with a long-term neurological condition, and of their family, clinicians and other stakeholders on three key processes: two-way communication, self-management and coordination of long-term care; and (B) use these data to develop a 'Living Well Toolkit', a structural support aiming to enhance the quality of these care processes. This qualitative descriptive study drew on the principles of participatory research. Data from interviews and focus groups with participants (n=25) recruited from five hospital, rehabilitation and community settings in New Zealand were analysed using conventional content analysis. Consultation with a knowledge-user group (n=4) and an implementation champion group (n=4) provided additional operational knowledge important to toolkit development and its integration into clinical practice. Four main, and one overarching, themes were constructed: (1) tailoring care: referring to getting to know the person and their individual circumstances; (2) i nvolving others: representing the importance of negotiating the involvement of others in the person's long-term management process; (3) exchanging knowledge: referring to acknowledging patient expertise; and (4) enabling: highlighting the importance of empowering relationships and processes. The overarching theme was: a ssume nothing . These themes informed the development of a toolkit comprising of two parts: one to support the person with the long-term neurological condition, and one targeted at clinicians to guide interaction and support their engagement with patients. Perspectives of healthcare users, clinicians and other stakeholders were fundamental to the development of the Living Well Toolkit. The findings were used to frame toolkit specifications and highlighted potential operational issues that could prove key to its success. Further research to evaluate its use is now underway. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Failures to further developing orphan medicinal products after designation granted in Europe: an analysis of marketing authorisation failures and abandoned drugs.

PubMed

Giannuzzi, Viviana; Landi, Annalisa; Bosone, Enrico; Giannuzzi, Floriana; Nicotri, Stefano; Torrent-Farnell, Josep; Bonifazi, Fedele; Felisi, Mariagrazia; Bonifazi, Donato; Ceci, Adriana

2017-09-11

The research and development process in the field of rare diseases is characterised by many well-known difficulties, and a large percentage of orphan medicinal products do not reach the marketing approval.This work aims at identifying orphan medicinal products that failed the developmental process and investigating reasons for and possible factors influencing failures. Drugs designated in Europe under Regulation (European Commission) 141/2000 in the period 2000-2012 were investigated in terms of the following failures: (1) marketing authorisation failures (refused or withdrawn) and (2) drugs abandoned by sponsors during development.Possible risk factors for failure were analysed using statistically validated methods. This study points out that 437 out of 788 designations are still under development, while 219 failed the developmental process. Among the latter, 34 failed the marketing authorisation process and 185 were abandoned during the developmental process. In the first group of drugs (marketing authorisation failures), 50% reached phase II, 47% reached phase III and 3% reached phase I, while in the second group (abandoned drugs), the majority of orphan medicinal products apparently never started the development process, since no data on 48.1% of them were published and the 3.2% did not progress beyond the non-clinical stage.The reasons for failures of marketing authorisation were: efficacy/safety issues (26), insufficient data (12), quality issues (7), regulatory issues on trials (4) and commercial reasons (1). The main causes for abandoned drugs were efficacy/safety issues (reported in 54 cases), inactive companies (25.4%), change of company strategy (8.1%) and drug competition (10.8%). No information concerning reasons for failure was available for 23.2% of the analysed products. This analysis shows that failures occurred in 27.8% of all designations granted in Europe, the main reasons being safety and efficacy issues. Moreover, the stage of development reached by drugs represents a specific risk factor for failures. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development of manufacturing systems for nanocrystalline and ultra-fine grain materials employing indexing equal channel angular pressing

NASA Astrophysics Data System (ADS)

Hester, Michael Wayne

Nanotechnology offers significant opportunities in providing solutions to existing engineering problems as well as breakthroughs in new fields of science and technology. In order to fully realize benefits from such initiatives, nanomanufacturing methods must be developed to integrate enabling constructs into commercial mainstream. Even though significant advances have been made, widespread industrialization in many areas remains limited. Manufacturing methods, therefore, must continually be developed to bridge gaps between nanoscience discovery and commercialization. A promising technology for integration of top-down nanomanufacturing yet to receive full industrialization is equal channel angular pressing, a process transforming metallic materials into nanostructured or ultra-fine grained materials with significantly improved performance characteristics. To bridge the gap between process potential and actual manufacturing output, a prototype top-down nanomanufacturing system identified as indexing equal channel angular pressing (IX-ECAP) was developed. The unit was designed to capitalize on opportunities of transforming spent or scrap engineering elements into key engineering commodities. A manufacturing system was constructed to impose severe plastic deformation via simple shear in an equal channel angular pressing die on 1100 and 4043 aluminum welding rods. 1/4 fraction factorial split-plot experiments assessed significance of five predictors on the response, microhardness, for the 4043 alloy. Predictor variables included temperature, number of passes, pressing speed, back pressure, and vibration. Main effects were studied employing a resolution III design. Multiple linear regression was used for model development. Initial studies were performed using continuous processing followed by contingency designs involving discrete variable length work pieces. IX-ECAP offered a viable solution in severe plastic deformation processing. Discrete variable length work piece pressing proved very successful. With three passes through the system, 4043 processed material experienced an 88.88% increase in microhardness, 203.4% increase in converted yield strength, and a 98.5% reduction in theoretical final grain size to 103 nanometers using the Hall-Petch relation. The process factor, number of passes, was statistically significant at the 95% confidence level; whereas, temperature was significant at the 90% confidence level. Limitations of system components precluded completion of studies involving continuous pressing. Proposed system redesigns, however, will ensure mainstream commercialization of continuous length work piece processing.

Evaluation of an Atmosphere Revitalization Subsystem for Deep Space Exploration Missions

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Abney, Morgan B.; Conrad, Ruth E.; Frederick, Kenneth R.; Greenwood, Zachary W.; Kayatin, Matthew J.; Knox, James C.; Newton, Robert L.; Parrish, Keith J.; Takada, Kevin C.;

Emotion Processing by ERP Combined with Development and Plasticity.

PubMed

Ding, Rui; Li, Ping; Wang, Wei; Luo, Wenbo

2017-01-01

Emotions important for survival and social interaction have received wide and deep investigations. The application of the fMRI technique into emotion processing has obtained overwhelming achievements with respect to the localization of emotion processes. The ERP method, which possesses highly temporal resolution compared to fMRI, can be employed to investigate the time course of emotion processing. The emotional modulation of the ERP component has been verified across numerous researches. Emotions, described as dynamically developing along with the growing age, have the possibility to be enhanced through learning (or training) or to be damaged due to disturbances in growth, which is underlain by the neural plasticity of emotion-relevant nervous systems. And mood disorders with typical symptoms of emotion discordance probably have been caused by the dysfunctional neural plasticity.

Prediction of Microstructure in High-Strength Ductile Forging Parts

NASA Astrophysics Data System (ADS)

Urban, M.; Keul, C.; Back, A.; Bleck, W.; Hirt, G.

2010-06-01

Governmental, environmental and economic demands call for lighter, stiffer and at the same time cheaper products in the vehicle industry. Especially safety relevant parts have to be stiff and at the same time ductile. The strategy of this project was to improve the mechanical properties of forging steel alloys by employing a high-strength and ductile bainitic microstructure in the parts while maintaining cost effective process chains to reach these goals for high stressed forged parts. Therefore, a new steel alloy combined with an optimized process chain has been developed. To optimize the process chain with a minimum of expensive experiments, a numerical approach was developed to predict the microstructure of the steel alloy after the process chain based on FEM simulations of the forging and cooling combined with deformation-time-temperature-transformation-diagrams.

Emotion Processing by ERP Combined with Development and Plasticity

PubMed Central

2017-01-01

Emotions important for survival and social interaction have received wide and deep investigations. The application of the fMRI technique into emotion processing has obtained overwhelming achievements with respect to the localization of emotion processes. The ERP method, which possesses highly temporal resolution compared to fMRI, can be employed to investigate the time course of emotion processing. The emotional modulation of the ERP component has been verified across numerous researches. Emotions, described as dynamically developing along with the growing age, have the possibility to be enhanced through learning (or training) or to be damaged due to disturbances in growth, which is underlain by the neural plasticity of emotion-relevant nervous systems. And mood disorders with typical symptoms of emotion discordance probably have been caused by the dysfunctional neural plasticity. PMID:28831313

Geologic analyses of LANDSAT-1 multispectral imagery of a possible power plant site employing digital and analog image processing. [in Pennsylvania

NASA Technical Reports Server (NTRS)

Lovegreen, J. R.; Prosser, W. J.; Millet, R. A.

1975-01-01

A site in the Great Valley subsection of the Valley and Ridge physiographic province in eastern Pennsylvania was studied to evaluate the use of digital and analog image processing for geologic investigations. Ground truth at the site was obtained by a field mapping program, a subsurface exploration investigation and a review of available published and unpublished literature. Remote sensing data were analyzed using standard manual techniques. LANDSAT-1 imagery was analyzed using digital image processing employing the multispectral Image 100 system and using analog color processing employing the VP-8 image analyzer. This study deals primarily with linears identified employing image processing and correlation of these linears with known structural features and with linears identified manual interpretation; and the identification of rock outcrops in areas of extensive vegetative cover employing image processing. The results of this study indicate that image processing can be a cost-effective tool for evaluating geologic and linear features for regional studies encompassing large areas such as for power plant siting. Digital image processing can be an effective tool for identifying rock outcrops in areas of heavy vegetative cover.

Simulation of materials processing: Fantasy or reality?

NASA Technical Reports Server (NTRS)

Jenkins, Thomas J.; Bright, Victor M.

1994-01-01

This experiment introduces students to the application of computer-aided design (CAD) and analysis of materials processing in the context of integrated circuit (IC) fabrication. The fabrication of modern IC's is a complex process which consists of several sequential steps. These steps involve the precise control of processing variables such as temperature, humidity, and ambient gas composition. In essence, the particular process employed during the fabrication becomes a 'recipe'. Due to economic and other considerations, CAD is becoming an indispensable part of the development of new recipes for IC fabrication. In particular, this experiment permits the students to explore the CAD of the thermal oxidation of silicon.

Examination of the U.S. Air Force's Science, Technology, Engineering, and Mathematics (STEM) Workforce Needs in the Future and Its Strategy to Meet Those Needs

ERIC Educational Resources Information Center

National Academies Press, 2010

2010-01-01

The Air Force requires technical skills and expertise across the entire range of activities and processes associated with the development, fielding, and employment of air, space, and cyber operational capabilities. The growing complexity of both traditional and emerging missions is placing new demands on education, training, career development,…

Promoting the Involvement of Students with Emotional and Behavioral Disorders in Career and Vocational Planning and Decision-Making: The Self-Determined Career Development Model

ERIC Educational Resources Information Center

Benitez, Debra T.; Lattimore, Jennifer; Wehmeyer, Michael L.

2005-01-01

The authors examined the effectiveness of a support model to instruct five youth with EBD to self-direct the problem-solving processes and promote self-determination skills by enabling them to: (a) set employment/career related goals, (b) develop and implement a plan toward goal attainment; and (c) adjust and evaluate progress toward meeting their…

The community development workshop, appendix B.

NASA Technical Reports Server (NTRS)

Brill, R.; Gastro, E.; Pennington, A. J.

1973-01-01

The Community Development Workshop is the name given to a collection of techniques designed to implement participation in the planning process. It is an electric approach, making use of current work in the psychology of groups, mathematical modeling and systems analysis, simulation gaming, and other techniques. An outline is presented for a session of the workshop which indicates some of the psychological techniques employed, i.e. confrontation, synectics, and encounter micro-labs.

Interactive boundary delineation of agricultural lands using graphics workstations

NASA Technical Reports Server (NTRS)

Cheng, Thomas D.; Angelici, Gary L.; Slye, Robert E.; Ma, Matt

1992-01-01

A review is presented of the computer-assisted stratification and sampling (CASS) system developed to delineate the boundaries of sample units for survey procedures. CASS stratifies the sampling units by land-cover and land-use type, employing image-processing software and hardware. This procedure generates coverage areas and the boundaries of stratified sampling units that are utilized for subsequent sampling procedures from which agricultural statistics are developed.

Feasibility study of liquid pool burning in reduced gravity

NASA Technical Reports Server (NTRS)

Kanury, A. M.

1979-01-01

The feasibility of conducting experiments in the Spacelab on ignition and flame spread with liquid fuel pools which are initially at a temperature lower than the fuel's flash point temperature was studied. Theories were developed for the ignition and flame spread processes, and experiments were conducted to understand the factors influencing the ignition process and the spread rate. The results were employed to devise a conceptual Spacelab experiment which is expected to be feasible for a safe conduct and to be suitable for obtaining crucial data on the concerned processes.

Digital images in the map revision process

NASA Astrophysics Data System (ADS)

Newby, P. R. T.

Progress towards the adoption of digital (or softcopy) photogrammetric techniques for database and map revision is reviewed. Particular attention is given to the Ordnance Survey of Great Britain, the author's former employer, where digital processes are under investigation but have not yet been introduced for routine production. Developments which may lead to increasing automation of database update processes appear promising, but because of the cost and practical problems associated with managing as well as updating large digital databases, caution is advised when considering the transition to softcopy photogrammetry for revision tasks.

Model-Based Verification and Validation of the SMAP Uplink Processes

NASA Technical Reports Server (NTRS)

Khan, M. Omair; Dubos, Gregory F.; Tirona, Joseph; Standley, Shaun

2013-01-01

This case study stands as an example of how a project can validate a system-level design earlier in the project life cycle than traditional V&V processes by using simulation on a system model. Specifically, this paper describes how simulation was added to a system model of the Soil Moisture Active-Passive (SMAP) mission's uplink process.Also discussed are the advantages and disadvantages of the methods employed and the lessons learned; which are intended to benefit future model-based and simulation-based V&V development efforts.

Adding a vocational focus to mental health rehabilitation.

PubMed

Blankertz, L; Robinson, S

1996-11-01

The study examined the effect of adding two employment specialists to the staff of a community mental health center; their sole responsibility was to develop the skills and positive work attitudes that clients with severe mental illness need to enter the state vocational rehabilitation system or to seek employment. A total of 122 clients were randomly assigned to a program with an employment specialist or to a control group with no specialized vocational services. Clients in the program were taught work skills and attitudes in group and individual sessions and through a trial work experience. A schedule of rewards reinforced positive changes. Outcomes measured were skill gains, changes in work attitudes, attainment of employment, and entry into the state vocational rehabilitation system. At nine months, 34 of the 61 clients in the program achieved positive changes in vocational status that included competitive employment, participation in training and evaluation programs operated by the state vocational system, and formal referral to the system. Only one client in the control group was linked to the state system. Skill gains and positive changes in work attitudes were found for all program clients. Logistical regression suggested that program participation, rather than client characteristics, was an important predictor of a positive outcome. Over a relatively short time period, targeted vocational programs can help clients with severe mental illness develop the skills and attitudes necessary to attain employment or entry into the vocational rehabilitation system. Vocational rehabilitation can be an integral part of the rehabilitation process for all mental health clients.

Veterinary clinical pathologists in the biopharmaceutical industry.

PubMed

Schultze, A Eric; Bounous, Denise I; Bolliger, Anne Provencher

2008-06-01

There is an international shortage of veterinary clinical pathologists in the workplace. Current trainees in veterinary clinical pathology may choose to pursue careers in academe, diagnostic laboratories, government health services, biopharmaceutical companies, or private practice. Academic training programs attempt to provide trainees with an exposure to several career choices. However, due to the proprietary nature of much of the work in the biopharmaceutical industry, trainees may not be fully informed regarding the nature of work for veterinary clinical pathologists and the myriad opportunities that await employment in the biopharmaceutical industry. The goals of this report are to provide trainees in veterinary clinical pathology and other laboratory personnel with an overview of the work-life of veterinary clinical pathologists employed in the biopharmaceutical industry, and to raise the profile of this career choice for those seeking to enter the workforce. Biographical sketches, job descriptions, and motivation for 3 successful veterinary clinical pathologists employed in the biopharmaceutical industry are provided. Current and past statistics for veterinary clinical pathologists employed in the biopharmaceutical industry are reviewed. An overview of the drug development process and involvement of veterinary clinical pathologists in the areas of discovery, lead optimization, and candidate evaluation are discussed. Additional duties for veterinary clinical pathologists employed in the biopharmaceutical industry include development of biomarkers and new technologies, service as scientific resources, diagnostic support services, and laboratory management responsibilities. There are numerous opportunities available for trainees in veterinary clinical pathology to pursue employment in the biopharmaceutical industry and enjoy challenging and rewarding careers.

20 CFR 655.81 - Application filing transition.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... intended employment prior to the effective date of these regulations, the SWAs shall continue to process...

20 CFR 655.1 - Purpose and scope of subpart A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... governing the labor certification process for the temporary employment of nonimmigrant foreign workers in...

Validity in the hiring and evaluation process.

PubMed

Gregg, Robert E

2006-01-01

Validity means "based on sound principles." Hiring decisions, discharges, and layoffs are often challenged in court. Unfortunately the employer's defenses are too often found "invalid." The Americans With Disabilities Act requires the employer to show a "validated" hiring process. Defense of discharges or layoffs often focuses on validity of the employer's decision. This article explains the elements of validity needed for sound and defendable employment decisions.

Development and testing of the Youth Alcohol Norms Survey (YANS) instrument to measure youth alcohol norms and psychosocial influences.

PubMed

Burns, Sharyn K; Maycock, Bruce; Hildebrand, Janina; Zhao, Yun; Allsop, Steve; Lobo, Roanna; Howat, Peter

2018-05-14

This study aimed to develop and validate an online instrument to: (1) identify common alcohol-related social influences, norms and beliefs among adolescents; (2) clarify the process and pathways through which proalcohol norms are transmitted to adolescents; (3) describe the characteristics of social connections that contribute to the transmission of alcohol norms; and (4) identify the influence of alcohol marketing on adolescent norm development. The online Youth Alcohol Norms Survey (YANS) was administered in secondary schools in Western Australia PARTICIPANTS: Using a 2-week test-retest format, the YANS was administered to secondary school students (n=481, age=13-17 years, female 309, 64.2%). The development of the YANS was guided by social cognitive theory and comprised a systematic multistage process including evaluation of content and face validity. A 2-week test-retest format was employed. Exploratory factor analysis was conducted to determine the underlying factor structure of the instrument. Test-retest reliability was examined using intraclass correlation coefficient (ICC) and Cohen's kappa. A five-factor structure with meaningful components and robust factorial loads was identified, and the five factors were labelled as 'individual attitudes and beliefs', 'peer and community identity', 'sibling influences', 'school and community connectedness' and 'injunctive norms', respectively. The instrument demonstrated stability across the test-retest procedure (ICC=0.68-0.88, Cohen's kappa coefficient=0.69) for most variables. The results support the reliability and factorial validity of this instrument. The YANS presents a promising tool, which enables comprehensive assessment of reciprocal individual, behavioural and environmental factors that influence alcohol-related norms among adolescents. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Factors that influence the tribocharging of pulverulent materials in compressed-air devices

NASA Astrophysics Data System (ADS)

Das, S.; Medles, K.; Mihalcioiu, A.; Beleca, R.; Dragan, C.; Dascalescu, L.

2008-12-01

Tribocharging of pulverulent materials in compressed-air devices is a typical multi-factorial process. This paper aims at demonstrating the interest of using the design of experiments methodology in association with virtual instrumentation for quantifying the effects of various process varaibles and of their interactions, as a prerequisite for the development of new tribocharging devices for industrial applications. The study is focused on the tribocharging of PVC powders in compressed-air devices similar to those employed in electrostatic painting. A classical 2 full-factorial design (3 factors at two levels) was employed for conducting the experiments. The response function was the charge/mass ratio of the material collected in a modified Faraday cage, at the exit of the tribocharging device. The charge/mass ratio was found to increase with the injection pressure and the vortex pressure in the tribocharging device, and to decrease with the increasing of the feed rate. In the present study an in-house design of experiments software was employed for statistical analysis of experimental data and validation of the experimental model.

[Productive restructuring and the reallocation of work and employment: a survey of the "new" forms of social inequality].

PubMed

Marques, Ana Paula Pereira

2013-06-01

The scope of this paper is to question the inevitability of the processes of segmentation and increased precariousness of the relations of labor and employment, which are responsible for the introduction of "new" forms of social inequality that underpin the current model of development of economies and societies. It seeks to criticize the limits of global financial and economic logic, which constitute a "new spirit of capitalism," namely a kind of reverence for the natural order of things. It is therefore necessary to conduct an analytical survey of the ongoing changes in the labor market, accompanied by epistemological vigilance which makes it possible to see neoliberal (di)visions and dominant techno-deterministic theses in context. The enunciation of scenarios on the future of work will conclude this survey and will make it possible to draw attention to both the historical and temporal constraints and to the urgent need to unveil what is ideological and political in the prevailing logic of rationalization and processes to reinstate work and employment as a "central social experience" in contemporary times.

Recent developments in materials and detectors for the infrared; Proceedings of the Meeting, Cannes, France, November 25, 26, 1985

NASA Technical Reports Server (NTRS)

Morten, F. D. (Editor); Seeley, John S. (Editor)

1986-01-01

The present conference on advancements in IR-sensitive materials and detector technologies employing them gives attention to thermal detectors, focal plane array processing detectors, novel detector designs, general properties of IR optics materials, and preparation methods for such materials. Specific topics encompass the fabrication of InSb MIS structures prepared by photochemical vapor deposition, IR heterodyne detectors employing cadmium mercury telluride, low microphony pyroelectric arrays, IR detection based on minority carrier extrusion, longwave reststrahl in IR crystals, and molecular beam techniques for optical thin film fabrication.

Report from the Integrated Modeling Panel at the Workshop on the Science of Ignition on NIF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marinak, M; Lamb, D

2012-07-03

This section deals with multiphysics radiation hydrodynamics codes used to design and simulate targets in the ignition campaign. These topics encompass all the physical processes they model, and include consideration of any approximations necessary due to finite computer resources. The section focuses on what developments would have the highest impact on reducing uncertainties in modeling most relevant to experimental observations. It considers how the ICF codes should be employed in the ignition campaign. This includes a consideration of how the experiments can be best structured to test the physical models the codes employ.

A novel process for low-sulfur biodiesel production from scum waste.

PubMed

Ma, Huan; Addy, Min M; Anderson, Erik; Liu, Weiwei; Liu, Yuhuan; Nie, Yong; Chen, Paul; Cheng, Beijiu; Lei, Hanwu; Ruan, Roger

2016-08-01

Scum is an oil-rich waste from the wastewater treatment plants with a high-sulfur level. In this work, a novel process was developed to convert scum to high quality and low sulfur content biodiesel. A combination of solvent extraction and acid washing as pretreatment was developed to lower the sulfur content in the scum feedstock and hence improve biodiesel conversion yield and quality. Glycerin esterification was then employed to convert free fatty acids to glycerides. Moreover, a new distillation process integrating the traditional reflux distillation and adsorptive desulfurization was developed to further remove sulfur from the crude biodiesel. As a result, 70% of the filtered and dried scum was converted to biodiesel with sulfur content lower than 15ppm. The fatty acid methyl ester profiles showed that the refined biodiesel from the new process exhibited a higher quality and better properties than that from traditional process reported in previous studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biodegradation of paint stripper solvents in a modified gas lift loop bioreactor.

PubMed

Vanderberg-Twary, L; Steenhoudt, K; Travis, B J; Hanners, J L; Foreman, T M; Brainard, J R

1997-07-05

Paint stripping wastes generated during the decontamination and decommissioning of former nuclear facilities contain paint stripping organics (dichloromethane, 2-propanol, and methanol) and bulk materials containing paint pigments. It is desirable to degrade the organic residues as part of an integrated chemical-biological treatment system. We have developed a modified gas lift loop bioreactor employing a defined consortium of Rhodococcus rhodochrous strain OFS and Hyphomicrobium sp. DM-2 that degrades paint stripper organics. Mass transfer coefficients and kinetic constants for biodegradation in the system were determined. It was found that transfer of organic substrates from surrogate waste into the air and further into the liquid medium in the bioreactor were rapid processes, occurring within minutes. Monod kinetics was employed to model the biodegradation of paint stripping organics. Analysis of the bioreactor process was accomplished with BIOLAB, a mathematical code that simulates coupled mass transfer and biodegradation processes. This code was used to fit experimental data to Monod kinetics and to determine kinetic parameters. The BIOLAB code was also employed to compare activities in the bioreactor of individual microbial cultures to the activities of combined cultures in the bioreactor. This code is of benefit for further optimization and scale-up of the bioreactor for treatment of paint stripping and other volatile organic wastes in bulk materials.

Development of a consensus core dataset in juvenile dermatomyositis for clinical use to inform research.

PubMed

McCann, Liza J; Pilkington, Clarissa A; Huber, Adam M; Ravelli, Angelo; Appelbe, Duncan; Kirkham, Jamie J; Williamson, Paula R; Aggarwal, Amita; Christopher-Stine, Lisa; Constantin, Tamas; Feldman, Brian M; Lundberg, Ingrid; Maillard, Sue; Mathiesen, Pernille; Murphy, Ruth; Pachman, Lauren M; Reed, Ann M; Rider, Lisa G; van Royen-Kerkof, Annet; Russo, Ricardo; Spinty, Stefan; Wedderburn, Lucy R; Beresford, Michael W

2018-02-01

This study aimed to develop consensus on an internationally agreed dataset for juvenile dermatomyositis (JDM), designed for clinical use, to enhance collaborative research and allow integration of data between centres. A prototype dataset was developed through a formal process that included analysing items within existing databases of patients with idiopathic inflammatory myopathies. This template was used to aid a structured multistage consensus process. Exploiting Delphi methodology, two web-based questionnaires were distributed to healthcare professionals caring for patients with JDM identified through email distribution lists of international paediatric rheumatology and myositis research groups. A separate questionnaire was sent to parents of children with JDM and patients with JDM, identified through established research networks and patient support groups. The results of these parallel processes informed a face-to-face nominal group consensus meeting of international myositis experts, tasked with defining the content of the dataset. This developed dataset was tested in routine clinical practice before review and finalisation. A dataset containing 123 items was formulated with an accompanying glossary. Demographic and diagnostic data are contained within form A collected at baseline visit only, disease activity measures are included within form B collected at every visit and disease damage items within form C collected at baseline and annual visits thereafter. Through a robust international process, a consensus dataset for JDM has been formulated that can capture disease activity and damage over time. This dataset can be incorporated into national and international collaborative efforts, including existing clinical research databases. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Enhancing the capabilities of emigration countries to protect men and women destined for low-skilled employment: the case of the Philippines.

PubMed

Santo Tomas, P

1999-01-01

This study examined policies in receiving countries, evaluated their effectiveness in protecting low skilled Filipino migrant workers, and discusses the potential for quantifying and objectifying labor migrant gains or losses. Data were obtained from focus groups among 10 technical managers of the Philippine Overseas Employment Administration and interviews with 10 policy-makers in order to establish a hierarchy of aims in labor migration and policy indicators. The aims are identified as good jobs abroad, an orderly process, efficient and fair recruitment, and easy transfers of remittances. Findings are that Philippine policies facilitate remittance transfers. Government was least effective in ensuring orderliness. Government was fairly effective in ensuring fairness and efficiency and ensuring good jobs overseas. It succeeded the most in ensuring that nationals can easily transfer their earnings. Allocation data reveal that more resources were expended on searching for good jobs and least on fairness and efficiency. Remittances increased after mandatory remittances were ended as imposed by the Marcos regime. De-skilling often resulted from overseas employment, but rehired workers received better pay on their second and third assignments. This research was exploratory and more research is needed for developing sensitive indicators and refining the process of evaluating key government policies. The Philippine Development Policy that encourages labor migration and protection of overseas workers is a necessity during the ongoing Asian economic crisis.

The physicochemical process of bacterial attachment to abiotic surfaces: Challenges for mechanistic studies, predictability and the development of control strategies.

PubMed

Wang, Yi; Lee, Sui Mae; Dykes, Gary

2015-01-01

Bacterial attachment to abiotic surfaces can be explained as a physicochemical process. Mechanisms of the process have been widely studied but are not yet well understood due to their complexity. Physicochemical processes can be influenced by various interactions and factors in attachment systems, including, but not limited to, hydrophobic interactions, electrostatic interactions and substratum surface roughness. Mechanistic models and control strategies for bacterial attachment to abiotic surfaces have been established based on the current understanding of the attachment process and the interactions involved. Due to a lack of process control and standardization in the methodologies used to study the mechanisms of bacterial attachment, however, various challenges are apparent in the development of models and control strategies. In this review, the physicochemical mechanisms, interactions and factors affecting the process of bacterial attachment to abiotic surfaces are described. Mechanistic models established based on these parameters are discussed in terms of their limitations. Currently employed methods to study these parameters and bacterial attachment are critically compared. The roles of these parameters in the development of control strategies for bacterial attachment are reviewed, and the challenges that arise in developing mechanistic models and control strategies are assessed.

New Vistas in Chemical Product and Process Design.

PubMed

Zhang, Lei; Babi, Deenesh K; Gani, Rafiqul

2016-06-07

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design. Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack of data needed for model development, solution strategies that incorporate multiscale options, and reliability versus predictive power. The need for an integrated model-experiment-based design approach is discussed together with benefits of employing a systematic computer-aided framework with built-in design templates.

20 CFR 655.5 - Purpose and scope of subpart A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process and Enforcement of Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... certification process for the temporary employment of nonimmigrant foreign workers in the U.S. in occupations...

Cheminformatics Applications and Physicochemical Property ...

EPA Pesticide Factsheets

The registration of new chemicals under the Toxic Substances Control Act (TSCA) and new pesticides under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) requires knowledge of the process science underlying the transport and transformation of organic chemicals in natural ecosystems. The purpose of this presentation is to demonstrate how cheminformatics, using chemical terms language in combination with the output of physicochemical property calculators, can be employed to encode this knowledge and make it available to the appropriate decision makers. The encoded process science is realized through the execution of reaction libraries in simulators such as EPA’s Chemical Transformation Simulator (CTS). In support of the CTS, reaction libraries have, or are currently being developed for a number of transformation processes including hydrolysis, abiotic reduction, photolysis and disinfection by-product formation. Examples of how the process science in the peer-reviewed literature is being encoded will be presented. The purpose of this presentation is to demonstrate how cheminformatics, using chemical terms language in combination with the output of physicochemical property calculators, can be employed to encode this knowledge and make it available to the appropriate decision makers.

Developing program theory for purveyor programs

PubMed Central

2013-01-01

Background Frequently, social interventions produce less for the intended beneficiaries than was initially planned. One possible reason is that ideas embodied in interventions are not self-executing and require careful and systematic translation to put into practice. The capacity of implementers to deliver interventions is thus paramount. Purveyor organizations provide external support to implementers to develop that capacity and to encourage high-fidelity implementation behavior. Literature on the theory underlying this type of program is not plentiful. Research shows that detailed, explicit, and agreed-upon program theory contributes to and encourages high-fidelity implementation behavior. The process of developing and depicting program theory is flexible and leaves the researcher with what might be seen as an overwhelming number of options. Methods This study was designed to develop and depict the program theory underlying the support services delivered by a South African purveyor. The purveyor supports seventeen local organizations in delivering a peer education program to young people as an HIV/AIDS prevention intervention. Purposive sampling was employed to identify and select study participants. An iterative process that involved site visits, a desktop review of program documentation, one-on-one unstructured interviews, and a subsequent verification process, was used to develop a comprehensive program logic model. Results The study resulted in a formalized logic model of how the specific purveyor is supposed to function; that model was accepted by all study participants. Conclusion The study serves as an example of how program theory of a ‘real life’ program can be developed and depicted. It highlights the strengths and weakness of this evaluation approach, and provides direction and recommendations for future research on programs that employ the purveyor method to disseminate interventions. PMID:23421855

Rapid analysis of pharmaceutical drugs using LIBS coupled with multivariate analysis.

PubMed

Tiwari, P K; Awasthi, S; Kumar, R; Anand, R K; Rai, P K; Rai, A K

2018-02-01

Type 2 diabetes drug tablets containing voglibose having dose strengths of 0.2 and 0.3 mg of various brands have been examined, using laser-induced breakdown spectroscopy (LIBS) technique. The statistical methods such as the principal component analysis (PCA) and the partial least square regression analysis (PLSR) have been employed on LIBS spectral data for classifying and developing the calibration models of drug samples. We have developed the ratio-based calibration model applying PLSR in which relative spectral intensity ratios H/C, H/N and O/N are used. Further, the developed model has been employed to predict the relative concentration of element in unknown drug samples. The experiment has been performed in air and argon atmosphere, respectively, and the obtained results have been compared. The present model provides rapid spectroscopic method for drug analysis with high statistical significance for online control and measurement process in a wide variety of pharmaceutical industrial applications.

Development of a carbonate absorption-based process for post-combustion CO2 capture: The role of biocatalyst to promote CO2 absorption rate

USGS Publications Warehouse

Lu, Y.; Ye, X.; Zhang, Z.; Khodayari, A.; Djukadi, T.

2011-01-01

An Integrated Vacuum Carbonate Absorption Process (IVCAP) for post-combustion carbon dioxide (CO2) capture is described. IVCAP employs potassium carbonate (PC) as a solvent, uses waste or low quality steam from the power plant for CO2 stripping, and employs a biocatalyst, carbonic anhydrase (CA) enzyme, for promoting the CO2 absorption into PC solution. A series of experiments were performed to evaluate the activity of CA enzyme mixed in PC solutions in a stirred tank reactor system under various temperatures, CA dosages, CO2 loadings, CO2 partial pressures, and the presence of major flue gas contaminants. It was demonstrated that CA enzyme is an effective biocatalyst for CO2 absorption under IVCAP conditions. ?? 2011 Published by Elsevier Ltd.

Nursing education: training evaluation by graduates, employers and teachers.

PubMed

Meira, Maria Dyrce Dias; Kurcgant, Paulina

2016-01-01

to support the assessment and the necessary changes in the curriculum of an undergraduate degree in Nursing. it is a descriptive study developed in two stages as an action research. In the first stage, the speeches of 19 graduates and 15 employers were interviewed and analyzed; in the second stage, five teachers participated in the focus group. For processing the data, the content analysis was adopted. based on the assessment of the actors, an action plan was created with suggestions regarding the curriculum flexibility, content resizing, continuing education, practice enhancement, active methodologies and autonomy of the student. the participation of actors participants of the training process and performance of professional nurses in the evaluation of a curriculum pointed aspects to realignment and provided concrete benefits to improving the quality of undergraduate course curriculum, scenario of this study.

Convergent molecular defects underpin diverse neurodegenerative diseases.

PubMed

Tofaris, George K; Buckley, Noel J

2018-02-19

In our ageing population, neurodegenerative disorders carry an enormous personal, societal and economic burden. Although neurodegenerative diseases are often thought of as clinicopathological entities, increasing evidence suggests a considerable overlap in the molecular underpinnings of their pathogenesis. Such overlapping biological processes include the handling of misfolded proteins, defective organelle trafficking, RNA processing, synaptic health and neuroinflammation. Collectively but in different proportions, these biological processes in neurons or non-neuronal cells lead to regionally distinct patterns of neuronal vulnerability and progression of pathology that could explain the disease symptomology. With the advent of patient-derived cellular models and novel genetic manipulation tools, we are now able to interrogate this commonality despite the cellular complexity of the brain in order to develop novel therapeutic strategies to prevent or arrest neurodegeneration. Here, we describe broadly these concepts and their relevance across neurodegenerative diseases. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Biocatalytic Conversion of Avermectin to 4″-Oxo-Avermectin: Improvement of Cytochrome P450 Monooxygenase Specificity by Directed Evolution▿ †

PubMed Central

Trefzer, Axel; Jungmann, Volker; Molnár, István; Botejue, Ajit; Buckel, Dagmar; Frey, Gerhard; Hill, D. Steven; Jörg, Mario; Ligon, James M.; Mason, Dylan; Moore, David; Pachlatko, J. Paul; Richardson, Toby H.; Spangenberg, Petra; Wall, Mark A.; Zirkle, Ross; Stege, Justin T.

2007-01-01

Discovery of the CYP107Z subfamily of cytochrome P450 oxidases (CYPs) led to an alternative biocatalytic synthesis of 4″-oxo-avermectin, a key intermediate for the commercial production of the semisynthetic insecticide emamectin. However, under industrial process conditions, these wild-type CYPs showed lower yields due to side product formation. Molecular evolution employing GeneReassembly was used to improve the regiospecificity of these enzymes by a combination of random mutagenesis, protein structure-guided site-directed mutagenesis, and recombination of multiple natural and synthetic CYP107Z gene fragments. To assess the specificity of CYP mutants, a miniaturized, whole-cell biocatalytic reaction system that allowed high-throughput screening of large numbers of variants was developed. In an iterative process consisting of four successive rounds of GeneReassembly evolution, enzyme variants with significantly improved specificity for the production of 4″-oxo-avermectin were identified; these variants could be employed for a more economical industrial biocatalytic process to manufacture emamectin. PMID:17483257

Synthesis of a fine neurological electrode by plasma polymerization processing.

PubMed

Cannon, J G; Dillon, R O; Bunshah, R F; Crandall, P H; Dymond, A M

1980-05-01

This research is part of a continuing program for the development of a coaxial depth electrode for research and diagnostic studies of neurological diseases. The requirements for this electrode include (1) strength and resistance to buckling sufficient to ensure self-forced penetration of brain tissue to a depth of 6 cm; (2) biocompatibility of the materials employed; (3) resistance to brittle fracture; and (4) a total diameter of less than 200 micrometer to minimize tissue damage. Earlier synthesis efforts using chemical vapor deposition techniques have been successful, although the process yield was 40% and an outer insulating layer had yet to be deposited. Plasma polymerization processes have been employed to realize an increase in the yield and provide an outer insulating layer. The starting material is W-26 at.% Re wire, nominally 125 micrometer in diameter. Hexamethyldisilazane(CH3)3SiNHSi(CH3)3 is used to deposit the insulating layers. The paper describes factors influencing the choice of materials, deposition techniques, and properties of electrodes.

Modeling and simulation of the debonding process of composite solid propellants

NASA Astrophysics Data System (ADS)

Feng, Tao; Xu, Jin-sheng; Han, Long; Chen, Xiong

2017-07-01

In order to study the damage evolution law of composite solid propellants, the molecular dynamics particle filled algorithm was used to establish the mesoscopic structure model of HTPB(Hydroxyl-terminated polybutadiene) propellants. The cohesive element method was employed for the adhesion interface between AP(Ammonium perchlorate) particle and HTPB matrix and the bilinear cohesive zone model was used to describe the mechanical response of the interface elements. The inversion analysis method based on Hooke-Jeeves optimization algorithm was employed to identify the parameters of cohesive zone model(CZM) of the particle/binder interface. Then, the optimized parameters were applied to the commercial finite element software ABAQUS to simulate the damage evolution process for AP particle and HTPB matrix, including the initiation, development, gathering and macroscopic crack. Finally, the stress-strain simulation curve was compared with the experiment curves. The result shows that the bilinear cohesive zone model can accurately describe the debonding and fracture process between the AP particles and HTPB matrix under the uniaxial tension loading.

Simultaneous synthesis and self-assembly of inorganic nanomaterials towards active and stable nanocatalysts

NASA Astrophysics Data System (ADS)

Yao, Zhou

The synthetic process in which the formation of nanoparticles and the self-assembly of those nanoparticles as building blocks are coupled together represents an efficient strategy towards stable nanostructures with relatively large geometric dimensions, well-defined shapes, structural hierarchicy and desirable porosities. In this dissertation, through employing appropriate soft/hard templates and controlling the reaction kinetics and thermodynamics, a series of novel physicochemical processes were developed to generate a wide variety of hierarchical 1D, 2D and 3D nanostructures with complex chemical compositions, structural integrities and/or porosities, which were then evaluated as electrocatalysts, heterogeneous catalysts and adsorbents. Based on the properties of their chemical compositions and potential applications, two types of inorganic nanostructures were obtained, including the noble metal-based nanostructures which could be employed as electrocatalysts and the Al-silicate-based hierarchical nanocomposites which could be used for preparation of supported nanocatalysts. The formation mechanisms underlying different processes are also well investigated.

Biologically inspired information theory: Adaptation through construction of external reality models by living systems.

PubMed

Nakajima, Toshiyuki

2015-12-01

Higher animals act in the world using their external reality models to cope with the uncertain environment. Organisms that have not developed such information-processing organs may also have external reality models built in the form of their biochemical, physiological, and behavioral structures, acquired by natural selection through successful models constructed internally. Organisms subject to illusions would fail to survive in the material universe. How can organisms, or living systems in general, determine the external reality from within? This paper starts with a phenomenological model, in which the self constitutes a reality model developed through the mental processing of phenomena. Then, the it-from-bit concept is formalized using a simple mathematical model. For this formalization, my previous work on an algorithmic process is employed to constitute symbols referring to the external reality, called the inverse causality, with additional improvements to the previous work. Finally, as an extension of this model, the cognizers system model is employed to describe the self as one of many material entities in a world, each of which acts as a subject by responding to the surrounding entities. This model is used to propose a conceptual framework of information theory that can deal with both the qualitative (semantic) and quantitative aspects of the information involved in biological processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

The role of the user within the medical device design and development process: medical device manufacturers' perspectives

PubMed Central

2011-01-01

Background Academic literature and international standards bodies suggest that user involvement, via the incorporation of human factors engineering methods within the medical device design and development (MDDD) process, offer many benefits that enable the development of safer and more usable medical devices that are better suited to users' needs. However, little research has been carried out to explore medical device manufacturers' beliefs and attitudes towards user involvement within this process, or indeed what value they believe can be added by doing so. Methods In-depth interviews with representatives from 11 medical device manufacturers are carried out. We ask them to specify who they believe the intended users of the device to be, who they consult to inform the MDDD process, what role they believe the user plays within this process, and what value (if any) they believe users add. Thematic analysis is used to analyse the fully transcribed interview data, to gain insight into medical device manufacturers' beliefs and attitudes towards user involvement within the MDDD process. Results A number of high-level themes emerged, relating who the user is perceived to be, the methods used, the perceived value and barriers to user involvement, and the nature of user contributions. The findings reveal that despite standards agencies and academic literature offering strong support for the employment formal methods, manufacturers are still hesitant due to a range of factors including: perceived barriers to obtaining ethical approval; the speed at which such activity may be carried out; the belief that there is no need given the 'all-knowing' nature of senior health care staff and clinical champions; a belief that effective results are achievable by consulting a minimal number of champions. Furthermore, less senior health care practitioners and patients were rarely seen as being able to provide valuable input into the process. Conclusions Medical device manufacturers often do not see the benefit of employing formal human factors engineering methods within the MDDD process. Research is required to better understand the day-to-day requirements of manufacturers within this sector. The development of new or adapted methods may be required if user involvement is to be fully realised. PMID:21356097

An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug

PubMed Central

Alyami, Hamad; Dahmash, Eman; Bowen, James

2017-01-01

Powder blend homogeneity is a critical attribute in formulation development of low dose and potent active pharmaceutical ingredients (API) yet a complex process with multiple contributing factors. Excipient characteristics play key role in efficient blending process and final product quality. In this work the effect of excipient type and properties, blending technique and processing time on content uniformity was investigated. Powder characteristics for three commonly used excipients (starch, pregelatinised starch and microcrystalline cellulose) were initially explored using laser diffraction particle size analyser, angle of repose for flowability, followed by thorough evaluations of surface topography employing scanning electron microscopy and interferometry. Blend homogeneity was evaluated based on content uniformity analysis of the model API, ergocalciferol, using a validated analytical technique. Flowability of powders were directly related to particle size and shape, while surface topography results revealed the relationship between surface roughness and ability of excipient with high surface roughness to lodge fine API particles within surface groves resulting in superior uniformity of content. Of the two blending techniques, geometric blending confirmed the ability to produce homogeneous blends at low dilution when processed for longer durations, whereas manual ordered blending failed to achieve compendial requirement for content uniformity despite mixing for 32 minutes. Employing the novel dry powder hybrid mixer device, developed at Aston University laboratory, results revealed the superiority of the device and enabled the production of homogenous blend irrespective of excipient type and particle size. Lower dilutions of the API (1% and 0.5% w/w) were examined using non-sieved excipients and the dry powder hybrid mixing device enabled the development of successful blends within compendial requirements and low relative standard deviation. PMID:28609454

An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug.

PubMed

Alyami, Hamad; Dahmash, Eman; Bowen, James; Mohammed, Afzal R

2017-01-01

Powder blend homogeneity is a critical attribute in formulation development of low dose and potent active pharmaceutical ingredients (API) yet a complex process with multiple contributing factors. Excipient characteristics play key role in efficient blending process and final product quality. In this work the effect of excipient type and properties, blending technique and processing time on content uniformity was investigated. Powder characteristics for three commonly used excipients (starch, pregelatinised starch and microcrystalline cellulose) were initially explored using laser diffraction particle size analyser, angle of repose for flowability, followed by thorough evaluations of surface topography employing scanning electron microscopy and interferometry. Blend homogeneity was evaluated based on content uniformity analysis of the model API, ergocalciferol, using a validated analytical technique. Flowability of powders were directly related to particle size and shape, while surface topography results revealed the relationship between surface roughness and ability of excipient with high surface roughness to lodge fine API particles within surface groves resulting in superior uniformity of content. Of the two blending techniques, geometric blending confirmed the ability to produce homogeneous blends at low dilution when processed for longer durations, whereas manual ordered blending failed to achieve compendial requirement for content uniformity despite mixing for 32 minutes. Employing the novel dry powder hybrid mixer device, developed at Aston University laboratory, results revealed the superiority of the device and enabled the production of homogenous blend irrespective of excipient type and particle size. Lower dilutions of the API (1% and 0.5% w/w) were examined using non-sieved excipients and the dry powder hybrid mixing device enabled the development of successful blends within compendial requirements and low relative standard deviation.

New taxanes in development.

PubMed

Ferlini, Cristiano; Gallo, Daniela; Scambia, Giovanni

2008-03-01

Taxanes are presently widely employed for the medical treatment of cancer. However, despite the huge clinical success, these agents exhibit clinical problems related to poor drug solubility, toxicity and, in particular, drug resistance. To identify the critical points related to the process of development of novel taxanes. Publicly available data on the paclitaxel and docetaxel analogues, which have entered a clinical development phase in the last 2 years have been taken into consideration. The development involved novel formulations of paclitaxel and novel chemical entities. For each agent in each category the development phase is analysed and a synthetic comment for each category is included. Despite all the efforts, until now clinical success with the new development of taxanes has been limited. Moreover, the expected clinical introduction of epothilones could further restrict the space for development of novel taxanes. Despite these facts, some interesting concepts emerged during the process of development and could lead to successful drugs in the forthcoming years.

'Scaling' analysis of the ice accretion process on aircraft surfaces

NASA Technical Reports Server (NTRS)

Keshock, E. G.; Tabrizi, A. H.; Missimer, J. R.

1982-01-01

A comprehensive set of scaling parameters is developed for the ice accretion process by analyzing the energy equations of the dynamic freezing zone and the already frozen ice layer, the continuity equation associated with supercooled liquid droplets entering into and impacting within the dynamic freezing zone, and energy equation of the ice layer. No initial arbitrary judgments are made regarding the relative magnitudes of each of the terms. The method of intrinsic reference variables in employed in order to develop the appropriate scaling parameters and their relative significance in rime icing conditions in an orderly process, rather than utilizing empiricism. The significance of these parameters is examined and the parameters are combined with scaling criteria related to droplet trajectory similitude.

High-performance polymer/layered silicate nanocomposites

NASA Astrophysics Data System (ADS)

Heidecker, Matthew J.

High-performance layered-silicate nanocomposites of Polycarbonate (PC), poly(ethylene terephthalate) (PET), and their blends were produced via conventional melt-blending techniques. The focus of this thesis was on the fundamentals of dispersion, control of thermal stability, maintenance of melt-blending processing conditions, and on optimization of the composites' mechanical properties via the design of controlled and thermodynamically favorable nano-filler dispersions within the polymer matrices. PET and PC require high temperatures for melt-processing, rendering impractical the use of conventional/commercial organically-modified layered-silicates, since the thermal degradation temperatures of their ammonium surfactants lies below the typical processing temperatures. Thus, different surfactant chemistries must be employed in order to develop melt-processable nanocomposites, also accounting for polymer matrix degradation due to water (PET) or amine compounds (PC). Novel high thermal-stability surfactants were developed and employed in montmorillonite nanocomposites of PET, PC, and PC/PET blends, and were compared to the respective nanocomposites based on conventional quaternary-ammonium modified montmorillonites. Favorable dispersion was achieved in all cases, however, the overall material behavior -- i.e., the combination of crystallization, mechanical properties, and thermal degradation -- was better for the nanocomposites based on the thermally-stable surfactant fillers. Studies were also done to trace, and ultimately limit, the matrix degradation of Polycarbonate/montmorillonite nanocomposites, through varying the montmorillonite surfactant chemistry, processing conditions, and processing additives. Molecular weight degradation was, maybe surprisingly, better controlled in the conventional quaternary ammonium based nanocomposites -- even though the thermal stability of the organically modified montmorillonites was in most cases the lowest. Dependence of the resultant nanocomposites' mechanical properties on the preferential alignment of the montmorillonite nano-platelet was also evaluated. Highly aligned filler platelets did not result in an additional enhancement in mechanical properties. PC/PET blends and their respective PC/PET/montmorillonite nanocomposites were synthesized and compared. The dispersion of the organically modified nano-fillers in the PC/PET blends was controlled via thermodynamic considerations, realized through proper surfactant choice: Nanocomposites in which the layered silicate was preferentially sequestered in the PET phase were designed and synthesized. This preferential dispersion of the nano-filler in the PET phase of the PC/PET blend was insensitive to processing conditions, including approaches employing a master-batch (filler concentrate); regardless of the master-batch matrix, both PC and PET were employed, thermodynamics drove the layered silicate to preferentially migrate to the PET phase of the PC/PET blend. In a second approach, the development of a nanocomposite with controlled PC/PET compatibilization near the montmorillonite platelets, in absence of appreciable transesterification reactions, led to the formation of very high performance nanocomposites. These latter systems, point to an exciting new avenue of future considerations for nanocomposite blends with selective nano-filler dispersions, where performance can be tailored via the controlled preferential dispersion of nano-fillers in one phase, or by filler-induced polymer compatibilization.

76 FR 11286 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2011 Adverse Effect Wage Rates, Allowable Charges for Agricultural Workers' Meals, and Maximum Travel Subsistence Reimbursement AGENCY...

Development of a support software system for real-time HAL/S applications

NASA Technical Reports Server (NTRS)

Smith, R. S.

1984-01-01

Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

Electromagnetic mixed waste processing system for asbestos decontamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasevich, R.S.; Vaux, W.; Ulerich, N.

The overall objective of this three-phase program is to develop an integrated process for treating asbestos-containing material that is contaminated with radioactive and hazardous constituents. The integrated process will attempt to minimize processing and disposal costs. The objectives of Phase 1 were to establish the technical feasibility of asbestos decomposition, inorganic radionuclide nd heavy metal removal, and organic volatilization. Phase 1 resulted in the successful bench-scale demonstration of the elements required to develop a mixed waste treatment process for asbestos-containing material (ACM) contaminated with radioactive metals, heavy metals, and organics. Using the Phase 1 data, a conceptual process was developed.more » The Phase 2 program, currently in progress, is developing an integrated system design for ACM waste processing. The Phase 3 program will target demonstration of the mixed waste processing system at a DOE facility. The electromagnetic mixed waste processing system employs patented technologies to convert DOE asbestos to a non-hazardous, radionuclide-free, stable waste. The dry, contaminated asbestos is initially heated with radiofrequency energy to remove organic volatiles. Second,the radionuclides are removed by solvent extraction coupled with ion exchange solution treatment. Third, the ABCOV method converts the asbestos to an amorphous silica suspension at low temperature (100{degrees}C). Finally the amorphous silica is solidified for disposal.« less

Problem-Based Learning in Engineering Ethics Courses

ERIC Educational Resources Information Center

Kirkman, Robert

2016-01-01

I describe the first stages of a process of design research in which I employ problem-based learning in a course in engineering ethics, which fulfills a requirement for students in engineering degree programs. The aim of the course is to foster development of particular cognitive skills contributing to moral imagination, a capacity to notice,…

Learning to Teach Elementary Students in Democratic Field Placements

ERIC Educational Resources Information Center

Payne, Katherina A.

2013-01-01

This multicase study employs sociocultural theories to analyze the learning to teach process and identity development of six novice elementary school teachers, who were immersed in a semester-long democratic field placement. Broadly, this study explored the field experience as part of democratic teacher education, and how the field experience can…

Utilization of pyrosequencing to monitor the microbiome dynamics of probiotic treated poultry (Gallus gallus domesticus) during downstream poultry processing

USDA-ARS?s Scientific Manuscript database

Antibiotic growth promoters that have been historically employed to control pathogens and increase the rate of animal development for human consumption are currently banned in many countries. Probiotics have been proposed as an alternative to control pathogenic bacteria. Traditional culture method...

Method for Examining Children's Beliefs about the Functional Role Played by Defensive Interpersonal Behaviour

ERIC Educational Resources Information Center

Westerman, Michael A.; Eubanks-Carter, Catherine; Ziebert, Nancy Corral; Jeffries, Elena; Cosgrove, Thomas J.

2007-01-01

The goal of this study was to develop a method for examining children's expectations about the short-term consequences of defensive interpersonal behaviour. We employed the theory of interpersonal defence (Dahmen & Westerman, in press; Westerman, 1998, 2005; Westerman & Prieto, 2006), an interpersonal reconceptualization of defence processes, as…

Improving the Laboratory Learning Experience: A Process to Train and Manage Teaching Assistants

ERIC Educational Resources Information Center

Nikolic, Sasha; Vial, Peter James; Ros, Montserrat; Stirling, David; Ritz, Christian

2015-01-01

This paper describes in detail a successful training program developed for sessional (part-time or nonpermanent) laboratory demonstrators employed in the Electrical Engineering Department of an Australian university. Such demonstrators play an important role in teaching practical concepts and skills in engineering. The success of the program…

Dynamic Framing in the Communication of Scientific Research: Texts and Interactions

ERIC Educational Resources Information Center

Davis, Pryce R.; Russ, Rosemary S.

2015-01-01

The fields of science education and science communication share the overarching goal of helping non-experts and non-members of the professional science community develop knowledge of the content and processes of scientific research. However, the specific audiences, methods, and aims employed in the two fields have evolved quite differently and as…

Interesting and Difficult Mathematical Problems: Changing Teachers' Views by Employing Multiple-Solution Tasks

ERIC Educational Resources Information Center

Guberman, Raisa; Leikin, Roza

2013-01-01

The study considers mathematical problem solving to be at the heart of mathematics teaching and learning, while mathematical challenge is a core element of any educational process. The study design addresses the complexity of teachers' knowledge. It is aimed at exploring the development of teachers' mathematical and pedagogical conceptions…

Personalized Learning: Hiring Educators for the 21st Century

ERIC Educational Resources Information Center

Stewart, Janet

2012-01-01

The hiring process is the intermediary step between teachers' pre-service education and their ongoing professional development journey. It's a critical juncture, and it's important that employers get it right. Within the education sector, the cost of a poor hire can be very high; an underperforming teacher may hinder student learning and undermine…

Video as Process and Product

ERIC Educational Resources Information Center

Miller, Sandra L.

2005-01-01

A sales institute helps students develop powerful communication skills to meet the goal of establishing successful careers in professional selling. It often employs the concept of video self-modeling to teach the finer points of salesmanship. Russ Berrie, a devotee of the art of sales, donated to William Paterson University enough money to found a…

1977 Teacher Intern Project. Final Report.

ERIC Educational Resources Information Center

Resnick, Harold S.

A need for better understanding between industry and education prompted development of a program to employ eight teachers in industry on a full-time basis during the summer to broaden the teachers' understanding of the nature and scope of the industrial process. Weekly seminars were held in which the teachers shared their experiences with each…

Developing and Implementing a Postsecondary Education Program for Young Adults with Intellectual and Developmental Disabilities: Processes and Procedure

ERIC Educational Resources Information Center

Francis, Grace L.; Gordon, Sarah; Kliethermes, Andrew J.; Regester, April; Baldini, Deborah; Grant, Amber

2018-01-01

Postsecondary education programs (PSEs) for young adults with intellectual and developmental disabilities in colleges and universities expand opportunities for these young adults and result in positive outcomes, including employment and improved social networks. Although participating in postsecondary education results in numerous benefits for…

Classical Social Justice: A Philosophical Exploration of the Roots of Social and Economic Inequities

ERIC Educational Resources Information Center

Lucey, Thomas A.; Agnello, Mary Frances; Hawkins, Jeffrey M.

2010-01-01

For a socially just community to occur, decision-making must employ respectful procedures that value input from representatives of all economic contexts. By considering philosophical roots of Western societal development, it is possible to gain insight into the systemic processes underlying these circumstances. By understanding these bases,…

The University as a Real Estate Developer--A New Role for an Old Institution.

ERIC Educational Resources Information Center

Sensbach, Werner

1989-01-01

The history of higher education's attitudes toward and involvement in real estate is chronicled, and the University of Virginia's recent confrontation of these issues is explained. The university's planning process included employing a consulting firm that recommended policy and regional cooperative efforts. Results to date are described. (MSE)

Appreciative Inquiry: An Experiential Exercise and Course Feedback Tool

ERIC Educational Resources Information Center

Scandura, Terri A.

2017-01-01

The action research method of appreciative inquiry (AI) was employed to develop a teaching tool. This exercise involves students' reflections on a course, noting when they learned the most. The AI process of appreciating, envisioning, dialoging, and innovating is used to help students reflect on how they learn. Instructors of all types of courses…

Observing and Producing Sounds, Elementary School Science, Level Four, Teaching Manual.

ERIC Educational Resources Information Center

Hale, Helen E.

This pilot teaching unit is one of a series developed for use in elementary school science programs. This unit is designed to help children discover specific concepts which relate to sound, such as volume, pitch, and echo. The student activities employ important scientific processes, such as observation, communication, inference, classification,…

DACUM: Bridging the Gap between Work and High Performance.

ERIC Educational Resources Information Center

Norton, Robert E.; McLennan, Krystyna S.

The DACUM (Developing A Curriculum) occupational analysis process provides a systematic way to look at worker duties and tasks so that important knowledge, skills, standards, tools, and attitudes can be handed on to the next generation of workers. Revamped by The Ohio State University's Center on Education and Training for Employment, DACUM…

Getting into the Game: Helping Preservice Candidates Find Initial Teaching Positions

ERIC Educational Resources Information Center

Ayers, Suzan F.; Senne, Terry A.

2011-01-01

Many teacher candidates fumble through the job-hunting process by employing the "discovery" approach to finding a teaching position. The purpose of this article is to provide direction and guidance for securing an initial teaching position in physical education. The areas outlined in this article include (1) developing application…

Turning around Failing Organizations: Insights for Educational Leaders

ERIC Educational Resources Information Center

Murphy, Joseph

2010-01-01

Purpose: In this article, we review the literature from the organizational sciences to develop a grounded narrative of turnaround in education. Approach: The approach is a review of literature. We employ an integrated process to unpack and make sense of the turnaround literature from the organizational sciences. We rely on strategies appropriate…

Response to Intervention Training: Theory into Practice for Sixth Grade Novice Teachers in Self-Contained Classrooms

ERIC Educational Resources Information Center

McMichel, Francita

2017-01-01

This qualitative case study examined the experiences from the professional development provided to four novice sixth grade teachers who employ reading interventions during Tier 2. Response to Intervention (RTI) is a systematic process that provides academic reading support to students through targeted interventions. RTI, when implemented…

Women into Non-Traditional Sectors: Addressing Gender Segregation in the Northern Ireland Workplace

ERIC Educational Resources Information Center

Potter, Michael; Hill, Myrtle

2009-01-01

The horizontal segregation of the workforce along gender lines tends to assign women to lower paid, lower status employment. Consequently, schemes to address segregation have focused on preparing women to enter non-traditional occupations through training and development processes. This article examines models to encourage women into…

The Matching Process in E-Mentoring: A Case Study in Luxury Hotels

ERIC Educational Resources Information Center

Simmonds, David; Lupi, Anne Marie Zammit

2010-01-01

Purpose: This paper seeks to examine the effectiveness of an innovative e-mentoring programme introduced in an international group of luxury hotels. Design/methodology/approach: The paper employs the survey method, with quantitative and qualitative data analysis. The research model was developed from a literature review. Findings: While mentoring…

Tying Theory To Practice: Cognitive Aspects of Computer Interaction in the Design Process.

ERIC Educational Resources Information Center

Mikovec, Amy E.; Dake, Dennis M.

The new medium of computer-aided design requires changes to the creative problem-solving methodologies typically employed in the development of new visual designs. Most theoretical models of creative problem-solving suggest a linear progression from preparation and incubation to some type of evaluative study of the "inspiration." These…

A Learning Environment for English Vocabulary Using Quick Response Codes

ERIC Educational Resources Information Center

Arikan, Yuksel Deniz; Ozen, Sevil Orhan

2015-01-01

This study focuses on the process of developing a learning environment that uses tablets and Quick Response (QR) codes to enhance participants' English language vocabulary knowledge. The author employed the concurrent triangulation strategy, a mixed research design. The study was conducted at a private school in Izmir, Turkey during the 2012-2013…

Employment and Livelihood. The Rural Labour Process and the Formulation of Development Policy.

ERIC Educational Resources Information Center

Bhaduri, Amit

1989-01-01

Argues that an effective industrialization strategy must include measures to improve the lot of rural workers and keep them in the countryside. Suggests a combination of measures to increase the flexibility of real urban industrial wages and to create income-generating opportunities for the rural poor. (Author)

Cooperative-Experiential Learning: Using Student-Developed Games to Increase Knowledge Retention

ERIC Educational Resources Information Center

Camp, Kerri M.; Avery, Sherry; Lirely, Roger

2012-01-01

Previous literature has discussed the use of cooperative and experiential learning as a means of augmenting student involvement in the learning process. Teamwork has been one method of employing cooperative learning and having students play games has been used extensively in experiential learning approaches. Often the two pedagogies are employed…

Methodology for Developing Teaching Activities and Materials for Use in Fluid Mechanics Courses in Undergraduate Engineering Programs

ERIC Educational Resources Information Center

Gamez-Montero, P. Javier; Raush, Gustavo; Domènech, Lluis; Castilla, Robert; García-Vílchez, Mercedes; Moreno, Hipòlit; Carbó, Albert

2015-01-01

"Mechanics" and "Fluids" are familiar concepts for any newly-registered engineering student. However, when combined into the term "Fluid Mechanics", students are thrust into the great unknown. The present article demonstrates the process of adaptation employed by the Fluid Mechanics course in the undergraduate…

Planning for the 80's: Workforce Educational Development Project Report.

ERIC Educational Resources Information Center

Cuyahoga Community Coll., Cleveland, OH.

The findings and recommendations found in this report are the result of a cooperative planning process undertaken by Cuyahoga Community College (CCC) to determine the best way of meeting the training and educational needs of the employed adults in its service district. Background information is presented first, describing the composition and…

40 CFR 721.47 - Conditions for research and development exemption.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES General Provisions § 721... processes a chemical substance identifies in subpart E of this part for a significant new use identified in... processor notifies all persons in its employ or to whom it directly distributes the chemical substance, who...

40 CFR 721.47 - Conditions for research and development exemption.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES General Provisions § 721... processes a chemical substance identifies in subpart E of this part for a significant new use identified in... processor notifies all persons in its employ or to whom it directly distributes the chemical substance, who...

40 CFR 721.47 - Conditions for research and development exemption.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES General Provisions § 721... processes a chemical substance identifies in subpart E of this part for a significant new use identified in... processor notifies all persons in its employ or to whom it directly distributes the chemical substance, who...

40 CFR 721.47 - Conditions for research and development exemption.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES General Provisions § 721... processes a chemical substance identifies in subpart E of this part for a significant new use identified in... processor notifies all persons in its employ or to whom it directly distributes the chemical substance, who...

Identity Matters in a Short-Term, International Service-Learning Program

ERIC Educational Resources Information Center

Mather, Peter C.; Karbley, Megan; Yamamoto, Makiko

2012-01-01

This study explores the role that identity and the identity development process play in a short-term, international service-learning experience. Employing narrative inquiry, two of the co-authors, student participants in a 2-week service-learning program in Honduras, describe and interpret their service-learning experience in the context of life…

78 FR 48683 - Announcement of Requirements and Registration for Million Hearts® Hypertension Control Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

.... The interview will include questions about the strategies employed by the individual or organization... protocol with the interviewer, respond to the interview questions, and review a summary data about the... participate in an interview to develop a success story that describes the systems and processes that support...

Review and Synthesis of Research in Agricultural Education, Second Edition. Research Series No. 59.

ERIC Educational Resources Information Center

Carpenter, Earl T.; Rodgers, John H.

To obtain an overview of research in agricultural education since 1966, approximately 500 studies were reviewed under these topics: (1) Philosophy and Objectives, (2) Manpower Needs and Employment Opportunities, (3) Teacher Education, (4) Learning Processes and Teaching Methods, (5) Instructional Materials and Devices, (6) Curriculum Development,…

Aboriginal Employment & Training Program Development--Toward an Internally Controlled Process.

ERIC Educational Resources Information Center

Stevenson, Phyllis Fay

A case study was conducted of the Peguis Adult High School program (PAHS), a community-based adult education in a Manitoba First Nation community for repeat dropouts and students who did not fit into regular high school. A literature review of the historical relationship between federal/provincial governments and First Nation communities examined…

Cognitive Activity-based Design Methodology for Novice Visual Communication Designers

ERIC Educational Resources Information Center

Kim, Hyunjung; Lee, Hyunju

2016-01-01

The notion of design thinking is becoming more concrete nowadays, as design researchers and practitioners study the thinking processes involved in design and employ the concept of design thinking to foster better solutions to complex and ill-defined problems. The goal of the present research is to develop a cognitive activity-based design…

Investing in Youth: Lithuania

ERIC Educational Resources Information Center

OECD Publishing, 2016

2016-01-01

The series Investing in Youth builds on the expertise of the Organisation for Economic Cooperation and Development (OECD) on youth employment, social support and skills. It covers both OECD countries and countries in the process of accession to the OECD, as well as some emerging economies. The present report on Lithuania is the fourth of a new…

An Autonomous Data Reduction Pipeline for Wide Angle EO Systems

NASA Astrophysics Data System (ADS)

Privett, G.; George, S.; Feline, W.; Ash, A.; Routledge, G.

The UK’s National Space and Security Policy states that the identification of potential on-orbit collisions and re-entry warning over the UK is of high importance, and is driving requirements for indigenous Space Situational Awareness (SSA) systems. To meet these requirements options are being examined, including the creation of a distributed network of simple, low cost commercial–off-the-shelf electro-optical sensors to support survey work and catalogue maintenance. This paper outlines work at Dstl examining whether data obtained using readily-deployable equipment could significantly enhance UK SSA capability and support cross-cueing between multiple deployed systems. To effectively exploit data from this distributed sensor architecture, a data handling system is required to autonomously detect satellite trails in a manner that pragmatically handles highly variable target intensities, periodicity and rates of apparent motion. The processing and collection strategies must be tailored to specific mission sets to ensure effective detections of platforms as diverse as stable geostationary satellites and low altitude CubeSats. Data captured during the Automated Transfer Vehicle-5 (ATV-5) de-orbit trial and images captured of a rocket body break up and a deployed deorbit sail have been employed to inform the development of a prototype processing pipeline for autonomous on-site processing. The approach taken employs tools such as Astrometry.Net and DAOPHOT from the astronomical community, together with image processing and orbit determination software developed inhouse by Dstl. Interim results from the automated analysis of data collected from wide angle sensors are described, together with the current perceived limitations of the proposed system and our plans for future development.

[Vocational rehabilitation in transition--challenges and perspectives].

PubMed

Schmidt, C; Froböse, I; Schian, H-M

2006-08-01

The present article outlines the challenges in occupational rehabilitation arising from the successive erosion of the financial foundations of the welfare system, from changes in industry as well as in health, education and labour-market policy. Five perspectives are discussed to design and develop strategies in occupational rehabilitation. Among these are: (1) Rehabilitation in companies is mostly based on miscarried efforts to prevent separation. The discontinuance and the re-integration in a position or in a company have therefore to be regarded as an interlocking process between vocational training centre, social insurance agencies and employers; (2) Regional vocational rehabilitation centres with the objective to promote participation in work life may advance to institutionalized junctions to connect the rehabilitation landscape and would represent the logistic context; (3) The development of participation benefits should mainly be directed towards individualized allocation of resources as well as the possibility of direct transfer to work in close cooperation with employers; (4) Structural solutions and process-innovation could be supported by application-orientated research; (5) A new consensus to assign future tasks and objectives should be defined among the responsible bodies and service organisations involved in occupational rehabilitation.

Development Of Educational Programs In Renewable And Alternative Energy Processing: The Case Of Russia

NASA Astrophysics Data System (ADS)

Svirina, Anna; Shindor, Olga; Tatmyshevsky, Konstantin

2014-12-01

The paper deals with the main problems of Russian energy system development that proves necessary to provide educational programs in the field of renewable and alternative energy. In the paper the process of curricula development and defining teaching techniques on the basis of expert opinion evaluation is defined, and the competence model for renewable and alternative energy processing master students is suggested. On the basis of a distributed questionnaire and in-depth interviews, the data for statistical analysis was obtained. On the basis of this data, an optimization of curricula structure was performed, and three models of a structure for optimizing teaching techniques were developed. The suggested educational program structure which was adopted by employers is presented in the paper. The findings include quantitatively estimated importance of systemic thinking and professional skills and knowledge as basic competences of a masters' program graduate; statistically estimated necessity of practice-based learning approach; and optimization models for structuring curricula in renewable and alternative energy processing. These findings allow the establishment of a platform for the development of educational programs.

The effect of hospital-physician integration on health information technology adoption.

PubMed

Lammers, Eric

2013-10-01

The US federal government has recently made a substantial investment to enhance the US health information technology (IT) infrastructure. Previous literature on the impact of IT on firm performance across multiple industries has emphasized the importance of a process of co-invention whereby organizations develop complementary practices to achieve greater benefit from their IT investments. In health care, employment of physicians by hospitals can confer greater administrative control to hospitals over physicians' actions and resources and thus enable the implementation of new technology and initiatives aimed at maximizing benefit from use of the technology. In this study, I tested for the relationship between hospital employment of physicians and hospitals' propensity to use health IT. I used state laws that prohibit hospital employment of physicians as an instrument to account for the endogenous relationship with hospital IT use. Hospital employment of physicians is associated with significant increases in the probability of hospital health IT use. Therefore, subsidization of health IT among hospitals not employing physicians may be less efficient. Furthermore, state laws prohibiting hospitals from employing physicians may inhibit adoption of health IT, thus working against policy initiatives aimed at promoting use of the technology. Copyright © 2012 John Wiley & Sons, Ltd.

Economic Development Assistance for Communities Affected by Employment Changes Due to Military Base Closures (BRAC)

DTIC Science & Technology

2009-06-16

resolution of disapproval is passed by Congress. Following the actual base closings and realignments, DOD develops an environmental remediation plan...examination of the BRAC process, For environmental remediation issues, see CRS Report RS21822, Military Base Closures: DOD’s 2005 Internal Selection...review and remediation . 2 Prior to the 1988 BRAC round, military installations were closed, or their missions were altered by order of the Secretary of

Economic Development Assistance for Communities Affected by Employment Changes Due to Military Base Closures (BRAC)

DTIC Science & Technology

2009-01-30

to assess loan risk are the following: (1) the length of the proposed repayment period; (2) the ratio of expected annual debt service...develops an environmental remediation plan to enable the conveyance of surplus federal land to other entities.1 Military facilities were closed and...1 For a detailed examination of the BRAC process, For environmental remediation issues, see CRS Report RS21822, Military Base

Investigation of Pearl River data collection system

NASA Technical Reports Server (NTRS)

1976-01-01

The reliability of employing NASA developed remote sensing for in situ near real time monitoring of water quality in the Pearl River is evaluated. The placement, operation and maintenance of a number of NASA developed data collection platforms (DCP's) on the Pearl River are described. The reception, processing, and retransmission of water quality data from an ERTS satellite to the Mississippi Air and Water Pollution Control Commission (MAWPCC) via computer linkup are assessed.

Engineering Design Theory: Applying the Success of the Modern World to Campaign Creation

DTIC Science & Technology

2009-05-21

and school of thought) to the simple methods of design.6 This progression is analogous to Peter Senge’s levels of learning disciplines.7 Senge...iterative learning and adaptive action that develops and employs critical and creative thinking , enabling leaders to apply the necessary logic to...overcome mental rigidity and develop group insight, the Army must learn to utilize group learning and thinking , through a fluid and creative open process

Turnaround Insights from the Organizational Sciences: A Review of the Empirical Evidence and the Development of a Staged Model of Recovery with Potential Implications for the PK-12 Education Sector

ERIC Educational Resources Information Center

Murphy, Joseph

2008-01-01

In this article, we review research from the organizational sciences to develop lessons for educators and policy makers. The approach is an integrative review of the literature. We employ a comprehensive process to unpack and make sense of the turnaround literature from the organizational sciences. We rely on strategies appropriate for document…

Compound Separation

NASA Technical Reports Server (NTRS)

1981-01-01

Jet Propulsion Laboratory developed a new one-step liquid-liquid extraction technique which cuts processing time, reduces costs and eliminates much of the equipment required. Technique employs disposable extraction columns, originally developed as an aid to the Los Angeles Police Department, which allow more rapid detection of drugs as part of the department's drug abuse program. Applications include medical treatment, pharmaceutical preparation and forensic chemistry. NASA waived title to Caltech, and Analytichem International is producing Extubes under Caltech license.

Guide to Competency-Based Education for Business and Office Occupations. A Catalog of Bookkeeping/Accounting, Clerical/Secretarial, and Data Processing Skills Which Your Students Need to Get a Job and to Keep It.

ERIC Educational Resources Information Center

New Mexico State Dept. of Education; Santa Fe. Div. of Vocational Education.

This curriculum guide was developed to help administrators develop a competency-based postsecondary curriculum to prepare students for employment in business and office occupations. The content is in five sections. The first one introduces the concepts and techniques of competency-based education and includes some sample forms, such as student…

The context of employment discrimination: interpreting the findings of a field experiment.

PubMed

Midtbøen, Arnfinn H

2015-03-01

Although field experiments have documented the contemporary relevance of discrimination in employment, theories developed to explain the dynamics of differential treatment cannot account for differences across organizational and institutional contexts. In this article, I address this shortcoming by presenting the main empirical findings from a multi-method research project, in which a field experiment of ethnic discrimination in the Norwegian labour market was complemented with forty-two in-depth interviews with employers who were observed in the first stage of the study. While the experimental data support earlier findings in documenting that ethnic discrimination indeed takes place, the qualitative material suggests that theorizing in the field experiment literature have been too concerned with individual and intra-psychic explanations. Discriminatory outcomes in employment processes seems to be more dependent on contextual factors such as the number of applications received, whether requirements are specified, and the degree to which recruitment procedures are formalized. I argue that different contexts of employment provide different opportunity structures for discrimination, a finding with important theoretical and methodological implications. © London School of Economics and Political Science 2014.

Empirical evaluation of the Process Overview Measure for assessing situation awareness in process plants.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-03-01

The Process Overview Measure is a query-based measure developed to assess operator situation awareness (SA) from monitoring process plants. A companion paper describes how the measure has been developed according to process plant properties and operator cognitive work. The Process Overview Measure demonstrated practicality, sensitivity, validity and reliability in two full-scope simulator experiments investigating dramatically different operational concepts. Practicality was assessed based on qualitative feedback of participants and researchers. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA in full-scope simulator settings based on data collected on process experts. Thus, full-scope simulator studies can employ the Process Overview Measure to reveal the impact of new control room technology and operational concepts on monitoring process plants. Practitioner Summary: The Process Overview Measure is a query-based measure that demonstrated practicality, sensitivity, validity and reliability for assessing operator situation awareness (SA) from monitoring process plants in representative settings.

The Utility of EEG Band Power Analysis in the Study of Infancy and Early Childhood

PubMed Central

Saby, Joni N.; Marshall, Peter J.

2012-01-01

Research employing electroencephalographic (EEG) techniques with infants and young children has flourished in recent years due to increased interest in understanding the neural processes involved in early social and cognitive development. This review focuses on the functional characteristics of the alpha, theta, and gamma frequency bands in the developing EEG. Examples of how analyses of EEG band power have been applied to specific lines of developmental research are also discussed. These examples include recent work on the infant mu rhythm and action processing, frontal alpha asymmetry and approach-withdrawal tendencies, and EEG power measures in the study of early psychosocial adversity. PMID:22545661

Myogenic Maturation by Optical-Training in Cultured Skeletal Muscle Cells.

PubMed

Asano, Toshifumi; Ishizuka, Toru; Yawo, Hiromu

2017-01-01

Optogenetic techniques are powerful tools for manipulating biological processes in identified cells using light under high temporal and spatial resolutions. Here, we describe an optogenetic training strategy to promote morphological maturation and functional development of skeletal muscle cells in vitro. Optical stimulation with a rhythmical frequency facilitates specific structural alignment of sarcomeric proteins. Optical stimulation also depolarizes the membrane potential, and induces contractile responses in synchrony with the given pattern of light pulses. These results suggest that optogenetic techniques can be employed to manipulate activity-dependent processes during myogenic development and control contraction of photosensitive skeletal muscle cells with high temporal and special precision.

Total quality management and shared governance: synergistic processes.

PubMed

Gardner, D B; Cummings, C

1994-01-01

"Synergism" accurately describes the gains that can be made when total quality management (TQM) and shared governance are employed for reciprocal development. This article explores the relationship between TQM and shared governance from a systems perspective. Systems thinking is the fundamental framework that must be learned by nursing managers. An example of this synergistic process is described from the National Institutes of Health nursing department's experience in implementing TQM and shared governance. The idea that structure is fundamental to problems and solutions when implementing change and focusing upon interdependency issues are the systemic competencies nursing managers need to develop in order to become strong nursing leaders.

How is post-industrial decline associated with the geography of physical activity? Evidence from the Health Survey for England.

PubMed

Rind, Esther; Jones, Andy; Southall, Humphrey

2014-03-01

In recent decades, the prevalence of physical activity has declined considerably in many developed countries, which has been related to rising levels of obesity and several weight-related medical conditions, such as coronary heart disease. There is evidence that areas exhibiting particularly low levels of physical activity have undergone a strong transition away from employment in physically demanding occupations. It is proposed that such processes of deindustrialisation may be causally linked to unexplained geographical disparities in physical activity. This study investigates how geographical variations in deindustrialisation are associated with current levels of physical activity across different activity domains and relevant macro-economic time periods in England. The analysis includes data on 27,414 adults from the Health Survey for England 2006 and 2008 who reported total, occupational, domestic, recreational and walking activity. Based on employment change in industries associated with heavy manual work, a local measurement of industrial decline was developed, covering the period 1841-2001. We applied a multilevel modelling approach to study associations between industrial decline and physical activity. Results indicate that the process of deindustrialisation appears to be associated with patterns of physical activity and that this is independent of household income. The effects observed were generally similar for men and women. However, the nature of the association differed across areas, time periods and employment types; in particular, residents of districts characterised by a history of manufacturing and mining employment had increased odds of reporting low activity levels. We conclude that post-industrial change may be a factor in explaining present-day variations in physical activity, emphasising the plausible impact of inherited cultures and regional identities on health related behaviours. Copyright © 2013 Elsevier Ltd. All rights reserved.

Modern Radar Techniques for Geophysical Applications: Two Examples

NASA Technical Reports Server (NTRS)

Arokiasamy, B. J.; Bianchi, C.; Sciacca, U.; Tutone, G.; Zirizzotti, A.; Zuccheretti, E.

2005-01-01

The last decade of the evolution of radar was heavily influenced by the rapid increase in the information processing capabilities. Advances in solid state radio HF devices, digital technology, computing architectures and software offered the designers to develop very efficient radars. In designing modern radars the emphasis goes towards the simplification of the system hardware, reduction of overall power, which is compensated by coding and real time signal processing techniques. Radars are commonly employed in geophysical radio soundings like probing the ionosphere; stratosphere-mesosphere measurement, weather forecast, GPR and radio-glaciology etc. In the laboratorio di Geofisica Ambientale of the Istituto Nazionale di Geofisica e Vulcanologia (INGV), Rome, Italy, we developed two pulse compression radars. The first is a HF radar called AIS-INGV; Advanced Ionospheric Sounder designed both for the purpose of research and for routine service of the HF radio wave propagation forecast. The second is a VHF radar called GLACIORADAR, which will be substituting the high power envelope radar used by the Italian Glaciological group. This will be employed in studying the sub glacial structures of Antarctica, giving information about layering, the bed rock and sub glacial lakes if present. These are low power radars, which heavily rely on advanced hardware and powerful real time signal processing. Additional information is included in the original extended abstract.

Application of the Materials-by-Design Methodology to Redesign a New Grade of the High-Strength Low-Alloy Class of Steels with Improved Mechanical Properties and Processability

NASA Astrophysics Data System (ADS)

Grujicic, M.; Snipes, J. S.; Ramaswami, S.

2016-01-01

An alternative to the traditional trial-and-error empirical approach for the development of new materials is the so-called materials-by-design approach. Within the latter approach, a material is treated as a complex system and its design and optimization is carried out by employing computer-aided engineering analyses, predictive tools, and available material databases. In the present work, the materials-by-design approach is utilized to redesign a grade of high-strength low-alloy (HSLA) class of steels with improved mechanical properties (primarily strength and fracture toughness), processability (e.g., castability, hot formability, and weldability), and corrosion resistance. Toward that end, a number of material thermodynamics, kinetics of phase transformations, and physics of deformation and fracture computational models and databases have been developed/assembled and utilized within a multi-disciplinary, two-level material-by-design optimization scheme. To validate the models, their prediction is compared against the experimental results for the related steel HSLA100. Then the optimization procedure is employed to determine the optimal chemical composition and the tempering schedule for a newly designed grade of the HSLA class of steels with enhanced mechanical properties, processability, and corrosion resistance.

Employer differences in upper-body musculoskeletal disorders and pain among immigrant Latino poultry processing workers.

PubMed

Rosenbaum, Daryl A; Mora, Dana C; Arcury, Thomas A; Chen, Haiying; Quandt, Sara A

2014-01-01

Between-employer differences in working conditions may lead to variable injury rates. The objective of this paper is to assess the difference in the prevalence of epicondylitis, rotator cuff syndrome, and low back pain among immigrant Latino poultry workers at plants of three different employers. Data were collected from a cross-sectional study among 286 poultry processing workers. Community-based sampling was used to recruit participants in western North Carolina. Rotator cuff syndrome (26.7%) and low back pain (27.9%) were more prevalent among employees of one specific employer. Multivariate analysis showed significant associations of low back pain and rotator cuff syndrome with age, task performed in the processing line, and employer. Employer is a major predictor of musculoskeletal disorders and pain. Line speed and work pace may account for these differences and provide an opportunity for regulation and intervention to protect the health of workers.

Preparing Future Geoscience Professionals: Needs, Strategies, Programs, and Online Resources

NASA Astrophysics Data System (ADS)

Macdonald, H.; Manduca, C. A.; Ormand, C. J.; Dunbar, R. W.; Beane, R. J.; Bruckner, M.; Bralower, T. J.; Feiss, P. G.; Tewksbury, B. J.; Wiese, K.

2011-12-01

Geoscience faculty, departments, and programs play an important role in preparing future geoscience professionals. One challenge is supporting the diversity of student goals for future employment and the needs of a wide range of potential employers. Students in geoscience degree programs pursue careers in traditional geoscience industries; in geoscience education and research (including K-12 teaching); and opportunities at the intersection of geoscience and other fields (e.g., policy, law, business). The Building Strong Geoscience Departments project has documented a range of approaches that departments use to support the development of geoscience majors as professionals (serc.carleton.edu/departments). On the Cutting Edge, a professional development program, supports graduate students and post-doctoral fellows interested in pursuing an academic career through workshops, webinars, and online resources (serc.carleton.edu/NAGTWorkshops/careerprep). Geoscience departments work at the intersection of student interests and employer needs. Commonly cited program goals that align with employer needs include mastery of geoscience content; field experience; skill in problem solving, quantitative reasoning, communication, and collaboration; and the ability to learn independently and take a project from start to finish. Departments and faculty can address workforce issues by 1) implementing of degree programs that develop the knowledge, skills, and attitudes that students need, while recognizing that students have a diversity of career goals; 2) introducing career options to majors and potential majors and encouraging exploration of options; 3) advising students on how to prepare for specific career paths; 4) helping students develop into professionals, and 5) supporting students in the job search. It is valuable to build connections with geoscience employers, work with alumni and foster connections between students and alumni with similar career interests, collaborate with campus career centers, incorporate career advising and mentoring throughout the degree program, and recognize that co-curricular experiences are also important avenues through which students can also develop as professionals. Graduate students and post-doctoral fellows have many questions about academic jobs and the academic job search process and many are uncertain about the nature of academic positions at different kinds of educational institutions (two-year colleges, primarily undergraduate institutions, and research universities). On the Cutting Edge workshops and webinars provide insights into academic careers in different institutional settings, various teaching strategies and course design, strategies for moving research forward, effective teaching and research statements, the job search process, and negotiation. The website provides resources on these topics as well as others and includes screen casts of the webinar sessions, making these resources available to all.

Solar energy in food processing-a critical appraisal.

PubMed

Eswara, Amruta R; Ramakrishnarao, M

2013-04-01

Increasing population and high cost of fuels have created opportunities for using alternate energies for post-harvest processing of foods. Solar food processing is an emerging technology that provides good quality foods at low or no additional fuel costs. A number of solar dryers, collectors and concentrators are currently being used for various steps in food processing and value addition. Society for Energy, Environment and Development (SEED) developed Solar Cabinet Dryer with forced circulation which has been used for dehydration and development of value added products from locally grown fruits, vegetables, leafy greens and forest produce. Drying under simulated shade conditions using UV-reducing Blue filter helps retain nutrients better. Its simple design and ease of handling makes SEED Solar Dryer an ideal choice for application of food processing in rural settings, closer to where the harvest is produced, eliminating the need for expensive transportation or storage of fresh produce. It also creates employment opportunities among the rural population, especially women. Other gadgets based on solar collectors and concentrators currently being used at various steps of food processing are reviewed.

78 FR 1260 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain... Agriculture (USDA) farm production region that includes another State either with its own wage rate finding or...

78 FR 1259 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2013 Adverse Effect Wage Rates AGENCY... Department of Agriculture (USDA). 20 CFR 655.120(c) requires that the Administrator of the Office of Foreign...

76 FR 79711 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2012 Adverse Effect Wage Rates AGENCY... Department of Agriculture (USDA). 20 CFR 655.120(c) requires the Administrator of the Office of Foreign Labor...

78 FR 69538 - Attestation Process for Employers Using F-1 Students in Off-Campus Work

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... Attestation Process for Employers Using F-1 Students in Off- Campus Work AGENCY: Employment and Training... be admitted as F-1 nonimmigrant students to work off-campus if: (1) The alien had completed one..., Health professions, Immigration, Labor, Longshore and harbor work, Migrant workers, Nonimmigrant workers...

Towards Semantic Modelling of Business Processes for Networked Enterprises

NASA Astrophysics Data System (ADS)

Furdík, Karol; Mach, Marián; Sabol, Tomáš

The paper presents an approach to the semantic modelling and annotation of business processes and information resources, as it was designed within the FP7 ICT EU project SPIKE to support creation and maintenance of short-term business alliances and networked enterprises. A methodology for the development of the resource ontology, as a shareable knowledge model for semantic description of business processes, is proposed. Systematically collected user requirements, conceptual models implied by the selected implementation platform as well as available ontology resources and standards are employed in the ontology creation. The process of semantic annotation is described and illustrated using an example taken from a real application case.

Incorporating Edge Information into Best Merge Region-Growing Segmentation

NASA Technical Reports Server (NTRS)

Tilton, James C.; Pasolli, Edoardo

2014-01-01

We have previously developed a best merge region-growing approach that integrates nonadjacent region object aggregation with the neighboring region merge process usually employed in region growing segmentation approaches. This approach has been named HSeg, because it provides a hierarchical set of image segmentation results. Up to this point, HSeg considered only global region feature information in the region growing decision process. We present here three new versions of HSeg that include local edge information into the region growing decision process at different levels of rigor. We then compare the effectiveness and processing times of these new versions HSeg with each other and with the original version of HSeg.

Study and Analysis of The Robot-Operated Material Processing Systems (ROMPS)

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.

1996-01-01

This is a report presenting the progress of a research grant funded by NASA for work performed during 1 Oct. 1994 - 31 Sep. 1995. The report deals with the development and investigation of potential use of software for data processing for the Robot Operated Material Processing System (ROMPS). It reports on the progress of data processing of calibration samples processed by ROMPS in space and on earth. First data were retrieved using the I/O software and manually processed using MicroSoft Excel. Then the data retrieval and processing process was automated using a program written in C which is able to read the telemetry data and produce plots of time responses of sample temperatures and other desired variables. LabView was also employed to automatically retrieve and process the telemetry data.

Integrating machine learning techniques into robust data enrichment approach and its application to gene expression data.

PubMed

Erdoğdu, Utku; Tan, Mehmet; Alhajj, Reda; Polat, Faruk; Rokne, Jon; Demetrick, Douglas

2013-01-01

The availability of enough samples for effective analysis and knowledge discovery has been a challenge in the research community, especially in the area of gene expression data analysis. Thus, the approaches being developed for data analysis have mostly suffered from the lack of enough data to train and test the constructed models. We argue that the process of sample generation could be successfully automated by employing some sophisticated machine learning techniques. An automated sample generation framework could successfully complement the actual sample generation from real cases. This argument is validated in this paper by describing a framework that integrates multiple models (perspectives) for sample generation. We illustrate its applicability for producing new gene expression data samples, a highly demanding area that has not received attention. The three perspectives employed in the process are based on models that are not closely related. The independence eliminates the bias of having the produced approach covering only certain characteristics of the domain and leading to samples skewed towards one direction. The first model is based on the Probabilistic Boolean Network (PBN) representation of the gene regulatory network underlying the given gene expression data. The second model integrates Hierarchical Markov Model (HIMM) and the third model employs a genetic algorithm in the process. Each model learns as much as possible characteristics of the domain being analysed and tries to incorporate the learned characteristics in generating new samples. In other words, the models base their analysis on domain knowledge implicitly present in the data itself. The developed framework has been extensively tested by checking how the new samples complement the original samples. The produced results are very promising in showing the effectiveness, usefulness and applicability of the proposed multi-model framework.

Nuclear shell model code CRUNCHER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Resler, D.A.; Grimes, S.M.

1988-05-01

A new nuclear shell model code CRUNCHER, patterned after the code VLADIMIR, has been developed. While CRUNCHER and VLADIMIR employ the techniques of an uncoupled basis and the Lanczos process, improvements in the new code allow it to handle much larger problems than the previous code and to perform them more efficiently. Tests involving a moderately sized calculation indicate that CRUNCHER running on a SUN 3/260 workstation requires approximately one-half the central processing unit (CPU) time required by VLADIMIR running on a CRAY-1 supercomputer.

30 GHz monolithic balanced mixers using an ion-implanted FET-compatible 3-inch GaAs wafer process technology

NASA Technical Reports Server (NTRS)

Bauhahn, P.; Contolatis, A.; Sokolov, V.; Chao, C.

1986-01-01

An all ion-implanted Schottky barrier mixer diode which has a cutoff frequency greater than 1000 GHz has been developed. This new device is planar and FET-compatible and employs a projection lithography 3-inch wafer process. A Ka-band monolithic balanced mixer based on this device has been designed, fabricated and tested. A conversion loss of 8 dB has been measured with a LO drive of 10 dBm at 30 GHz.

Palladium-Catalyzed Borylation of Primary Alkyl Bromides

PubMed Central

Joshi-Pangu, Amruta; Ma, Xinghua; Diane, Mohamed; Iqbal, Sidra; Kribs, Robert J.; Huang, Richard; Wang, Chao-Yuan

2012-01-01

A mild Pd-catalyzed process for the borylation of alkyl bromides has been developed using bis(pinacolato)diboron as a boron source. This process accommodates the use of a wide range of functional groups on the alkyl bromide substrate. Primary bromides react with complete selectivity in the presence of a secondary bromide. The generality of this approach is demonstrated by its extension to the use of alkyl iodides and alkyl tosylates, as well as borylation reactions employing bis(neopentyl glycolato)diboron as the boron source. PMID:22774861

Multiphase, multi-electrode Joule heat computations for glass melter and in situ vitrification simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowery, P.S.; Lessor, D.L.

Waste glass melter and in situ vitrification (ISV) processes represent the combination of electrical thermal, and fluid flow phenomena to produce a stable waste-from product. Computational modeling of the thermal and fluid flow aspects of these processes provides a useful tool for assessing the potential performance of proposed system designs. These computations can be performed at a fraction of the cost of experiment. Consequently, computational modeling of vitrification systems can also provide and economical means for assessing the suitability of a proposed process application. The computational model described in this paper employs finite difference representations of the basic continuum conservationmore » laws governing the thermal, fluid flow, and electrical aspects of the vitrification process -- i.e., conservation of mass, momentum, energy, and electrical charge. The resulting code is a member of the TEMPEST family of codes developed at the Pacific Northwest Laboratory (operated by Battelle for the US Department of Energy). This paper provides an overview of the numerical approach employed in TEMPEST. In addition, results from several TEMPEST simulations of sample waste glass melter and ISV processes are provided to illustrate the insights to be gained from computational modeling of these processes. 3 refs., 13 figs.« less